Avvio lo scatto automatico per OmagPHOTO

- in VerifyOutOfStrokes prima di controllare il valore dell'asse C si cerca di riportarlo nel range ammesso (modulo 360 gradi).

CAM/CamAuto.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Forms.Integration
+Imports EgtUILib
 
 Friend Module CamAuto
 
@@ -29,7 +30,7 @@ Friend Module CamAuto
       Return bOk
    End Function
 
-   Friend Function AddWaterJetMachining( nOperId As Integer, ByRef nWarn As Integer) As Boolean
+   Friend Function AddWaterJetMachining(nOperId As Integer, ByRef nWarn As Integer) As Boolean
       EgtLuaCreateGlobTable("CAM")
       SetLuaStandardCamParams()
       EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
@@ -163,6 +164,22 @@ Friend Module CamAuto
       Return bOk
    End Function
 
+   Friend Function ResetAllRawPart() As Boolean
+      Dim nPhase As Integer = 1
+      Dim nOtherRaw As Integer = EgtGetFirstRawPart()
+      While nOtherRaw <> GDB_ID.NULL
+         ' se il pezzo non appartiene alla prima fase allora viene eliminato
+         If Not EgtVerifyRawPartPhase(nOtherRaw, nPhase) Then
+            Dim NextRaw As Integer = EgtGetNextRawPart(nOtherRaw)
+            EgtRemoveRawPart(nOtherRaw)
+            nOtherRaw = NextRaw
+         Else
+            nOtherRaw = EgtGetNextRawPart(nOtherRaw)
+         End If
+      End While
+      Return True
+   End Function
+
    ' verifico che il contorno passato non sia stato separato
    Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer)
       Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)

CadCuts/MoveRawPartPage.xaml

@@ -7,164 +7,167 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
 
-   <!-- Definizione della SplitPage -->
-   <Grid Name="SplitPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
+    <!-- Definizione della SplitPage -->
+    <Grid Name="SplitPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-      <!--Upper button grid-->
-      <Grid Grid.Column="1">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="4*"/>
-            <ColumnDefinition Width="8*"/>
-         </Grid.ColumnDefinitions>
-
-         <!--Griglia per oscurare i bottoni della pagina sottostante-->
-         <Grid Background="{DynamicResource OmagCut_Gray}">
+        <!--Upper button grid-->
+        <Grid Grid.Column="1">
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="8*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            <!--Griglia per oscurare i bottoni della pagina sottostante-->
+            <Grid Background="{DynamicResource OmagCut_Gray}">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
+                        <Image.RenderTransform>
+                            <TransformGroup>
+                                <RotateTransform Angle="180"/>
+                            </TransformGroup>
+                        </Image.RenderTransform>
+                    </Image>
+                </Button>
+                <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+            </Grid>
+        </Grid>
+
+        <!--Left Button Grid-->
+        <Grid Grid.RowSpan="3">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <Button Name="TopLBtn" Grid.Column="0" Grid.Row="1"
+         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+                <Image Source="{DynamicResource TopLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
-                  <Image.RenderTransform>
-                     <TransformGroup>
-                        <RotateTransform Angle="180"/>
-                     </TransformGroup>
-                  </Image.RenderTransform>
-               </Image>
+            <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
+         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+                <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-         </Grid>
-      </Grid>
-
-      <!--Left Button Grid-->
-      <Grid Grid.RowSpan="3">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="2*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
-
-         <Button Name="TopLBtn" Grid.Column="0" Grid.Row="1"
+            <Button Name="TopRBtn" Grid.Column="2" Grid.Row="1"
          Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource TopLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="TopRBtn" Grid.Column="2" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource TopRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
+                <Image Source="{DynamicResource TopRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
          Style="{DynamicResource OmagCut_LeftGrayGradientYellowButton}">
-            <Image Source="{DynamicResource LeftArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="1" Grid.Row="2" Width="50"
+                <Image Source="{DynamicResource LeftArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="1" Grid.Row="2" Width="50"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-         <Button Name="ResetBtn" Grid.Column="1" Grid.Row="2"
+            <Button Name="ResetBtn" Grid.Column="1" Grid.Row="2"
             Style="{DynamicResource OmagCut_YellowTextButton}">
-         </Button>
-         <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
+            </Button>
+            <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
          Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RightArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="BottomLBtn" Grid.Column="0" Grid.Row="3"
+                <Image Source="{DynamicResource RightArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="BottomLBtn" Grid.Column="0" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource BottomLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
+                <Image Source="{DynamicResource BottomLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="BottomRBtn" Grid.Column="2" Grid.Row="3"
+                <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="BottomRBtn" Grid.Column="2" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource BottomRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
+                <Image Source="{DynamicResource BottomRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
-         <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
+            <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
             Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                 <Image Source="{DynamicResource CounterClockwiseRotateImg}" Width="64" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
-         </Button>
+            </Button>
 
-         <Grid Name="RotationAngle" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center" VerticalAlignment="Center">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="Auto"/>
-               <ColumnDefinition Width="Auto"/>
-            </Grid.ColumnDefinitions>
-            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
+            <Grid Name="RotationAngle" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center" VerticalAlignment="Center">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="Auto"/>
+                    <ColumnDefinition Width="Auto"/>
+                </Grid.ColumnDefinitions>
+                <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
+                <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
             Text="°"/>
-         </Grid>
+            </Grid>
 
-         <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
+            <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
             Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
+                <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
-         </Button>
+            </Button>
 
-
-         <Button Name="RemovePartBtn" Grid.ColumnSpan="2" Grid.Row="6"
+            <!--Gestione sfridi-->
+            <Button Name="RemovePartBtn" Grid.ColumnSpan="2" Grid.Row="6"
                  Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-         <Button Name="ScrapsBtn" Grid.Column="3" Grid.Row="6"
+            <Button Name="ScrapsBtn" Grid.Column="3" Grid.Row="6"
                  Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
+            <!--Gestione scarico pezzi-->
+            <Button Name="UnloadPartsBtn" Grid.ColumnSpan="2" Grid.Row="7"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
             <Grid Grid.Row="7" Grid.ColumnSpan="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+            </Grid>
+
+        </Grid>
+
+        <!--Lower button grid, sfondo grigio per coprire i bottoni della pagina sottostante-->
+        <Grid Grid.Column="1" Grid.Row="2" Background="{DynamicResource OmagCut_Gray}">
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="10*"/>
             </Grid.ColumnDefinitions>
-
-         </Grid>
-
-      </Grid>
-
-      <!--Lower button grid, sfondo grigio per coprire i bottoni della pagina sottostante-->
-      <Grid Grid.Column="1" Grid.Row="2" Background="{DynamicResource OmagCut_Gray}">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="10*"/>
-         </Grid.ColumnDefinitions>
             <!-- Inserimento della pausa durante il movimento sulla tavola di scarico-->
             <Button Name="PauseBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
                 <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
         </Grid>
 
-   </Grid>
+    </Grid>
 
 </UserControl>

CadCuts/MoveRawPartPage.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Forms.Integration
+Imports EgtUILib
 
 Public Class MoveRawPartPage
    ' Riferimento alla MainWindow
@@ -35,12 +36,16 @@ Public Class MoveRawPartPage
    Private m_ScrapsVisibility As Visibility = Visibility.Visible
    Private m_CurrRawOnVacuum As Integer = GDB_ID.NULL
 
+   ' definisce se è stata inserito uno scarico 
+   Private m_IsCurrPhaseUnloaded As Boolean = False
+
    Private Sub MoveRawPartPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno testi
       RemovePartBtn.Content = EgtMsg(MSG_MOVERAWPAGEUC + 1)  'Rimuovi
       ModifyBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 17)       'Modifica
       ResetBtn.Content = EgtMsg(MSG_NESTPAGEUC + 6)          'Reset
       ScrapsBtn.Content = "Add Scraps"
+      UnloadPartsBtn.Content = "Move part"
    End Sub
 
    Private Sub MoveRawPartPage_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
@@ -60,7 +65,12 @@ Public Class MoveRawPartPage
       End If
       ' Deseleziono tutto
       EgtDeselectAll()
-      ' Recupero i tagli allungati prima definiti
+      ' resetto variabili di navigazione nelle fasi
+      m_bPrev = False
+      m_bToNext = False
+
+      '---------------------------- CREATE NEW PHASE ----------------------------
+      ' Recupero i tagli ABILITATI prima definiti
       Dim Cuts(0) As Integer
       m_SplitPage.GetEnabledCuts(Cuts)
       ' Fase precedente
@@ -69,11 +79,19 @@ Public Class MoveRawPartPage
       Dim vNewRaws As New List(Of Integer)
       If Not m_SplitPage.m_bShow Then
          SplitRawParts(nPrevPhase, Cuts, vNewRaws)
+         m_IsCurrPhaseUnloaded = False
       Else
-         EgtSetCurrPhase(nPrevPhase + 1)
+         nPrevPhase = nPrevPhase + 1
+         EgtSetCurrPhase(nPrevPhase)
          HideAllMachinings()
+         ' verifico se la fase corrente è di tipo scarico frontale
+         m_nCurrDisposition = EgtGetPhaseDisposition(nPrevPhase)
+         If IsDispUnloadOnAuxTab(m_nCurrDisposition) Then
+            m_SplitPage.m_bOnAuxTab = True
+         End If
       End If
       m_nCurrPhase = EgtGetCurrPhase()
+      '---------------------------- CREATE NEW PHASE ----------------------------
 
       '---------------------------- SCRAPS ----------------------------
       ' gestione visualizzazione del comando "Scraps"
@@ -101,14 +119,19 @@ Public Class MoveRawPartPage
       End If
       '---------------------------- SCRAPS ----------------------------
 
+      '---------------------------- AUX TABLE ---------------------------- 
       ' Se movimento pezzi finale, sistemazioni per tavolo ausiliario
-      If m_SplitPage.m_bOnAuxTab Then
-         ' assegnazione delle info tavola ausiliaria alla dispozione corrente
+      If m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
+         ' assegnazione delle info tavola ausiliaria alla dispozione corrente (Spostato nella funzione Refresh)
          SetAuxTabInCurrDisposition()
+         UnloadPartsBtn.Content = "Go to MOVE part"
          ' altrimenti, aggiorno visualizzazione
-      Else
+      ElseIf Not m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
          EgtDraw()
+         UnloadPartsBtn.Content = "Go to UNLOAD part"
       End If
+      '---------------------------- AUX TABLE ---------------------------- 
+
       ' Carico i parametri di movimento
       m_dStep = GetPrivateProfileDouble(S_RAWMOVE, K_RAWSTEP, 50, m_MainWindow.GetIniFile())
       ' Ricavo la lunghezza del baffo di taglio 
@@ -167,6 +190,30 @@ Public Class MoveRawPartPage
 
       ' aggiorno il messaggio del comando per gestire gli sfridi
       VerifyIsNewScrap(m_CurrRawOnVacuum)
+      ' aggiorno la visibilità dei comandi
+      RefreshVisibility()
+      ' salvo l'idice della fase corrente
+      m_nCurrDisposition = EgtGetPhaseDisposition(m_nCurrPhase)
+      ' Abilitazione bottone modifica
+      ModifyBtn.IsEnabled = m_SplitPage.m_bShow
+      ' gestione abilitazione altri bottoni
+      EnableButtons()
+   End Sub
+
+   ' Gestione di visualizzazione dei comandi per il movimento dei pezzi
+   Private Sub RefreshVisibility()
+      ' Aggiorno visulizzazione comando per passare alla pagina di scarico
+      If Not m_SplitPage.m_bEnableOnAuxTab Then
+         UnloadPartsBtn.Visibility = Visibility.Hidden
+      Else
+         UnloadPartsBtn.Visibility = Visibility.Visible
+         If m_SplitPage.m_bOnAuxTab Then
+            UnloadPartsBtn.Content = "Go to MOVE part"
+            ' altrimenti, aggiorno visualizzazione
+         Else
+            UnloadPartsBtn.Content = "Go to UNLOAD part"
+         End If
+      End If
       ' Aggiorno interfaccia per taglio perpendicolare
       If m_bByHand Then
          UpBtn.Visibility = Windows.Visibility.Visible
@@ -222,12 +269,6 @@ Public Class MoveRawPartPage
          ResetBtn.Visibility = Windows.Visibility.Visible
          ScrapsBtn.Visibility = Windows.Visibility.Hidden
       End If
-      ' salvo l'idice della fase corrente
-      m_nCurrDisposition = EgtGetPhaseDisposition(m_nCurrPhase)
-      ' Abilitazione bottone modifica
-      ModifyBtn.IsEnabled = m_SplitPage.m_bShow
-      ' gestione abilitazione altri bottoni
-      EnableButtons()
    End Sub
 
    Private Sub SetAuxTabInCurrDisposition()
@@ -292,12 +333,12 @@ Public Class MoveRawPartPage
                EgtSetStatus(nId, GDB_ST.ON_)
                ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola (evito il controllo se ultima fase)
                If VerifyCollisionWithOtherRawPart(nId) Then
-                     ' mantengo la selezione del pezzo
-                     EgtSetStatus(nId, GDB_ST.SEL)
-                     m_CurrProjPage.SetErrorMessage("Collisione pezzi")
-                  Else
-                     ' Se con ventose, le nascondo
-                     If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(nId, GDB_ST.SEL)
+                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+               Else
+                  ' Se con ventose, le nascondo
+                  If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
                End If
             Else
 
@@ -329,8 +370,6 @@ Public Class MoveRawPartPage
                   VacuumCups.SetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
                   VacuumCups.SetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
                   VacuumCups.SetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
-                  ' se su scarico frontale allora devo modificare la scelta delle ventose
-                  VacuumCups.bUnloadingOnAuxTab = m_SplitPage.m_bOnAuxTab
                   If PutVacuumCupsOnRaw(nId, rmData) Then
                      ' Visualizzo le ventose
                      EgtSetStatus(GetVacuumId(), GDB_ST.ON_)
@@ -447,7 +486,7 @@ Public Class MoveRawPartPage
             If EgtMoveRawPart(nRawId, dMove * m_vtDir) Then
                m_dCurrDist += Math.Abs(dMove)
             End If
-         ' Altrimenti movimento Y +
+            ' Altrimenti movimento Y +
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, m_dStep, 0)
@@ -490,7 +529,7 @@ Public Class MoveRawPartPage
             If EgtMoveRawPart(nRawId, dMove * m_vtDir) Then
                m_dCurrDist -= Math.Abs(dMove)
             End If
-         ' Altrimenti movimento Y -
+            ' Altrimenti movimento Y -
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, -m_dStep, 0)
@@ -782,6 +821,33 @@ Public Class MoveRawPartPage
       End While
    End Sub
 
+   ' Passo dalla pagina di movimento dei pezzi alla pagina di scarico
+   Private Sub UnloadPartBtn_Click() Handles UnloadPartsBtn.Click
+      ' forzo lo stato di scarico frontale oppure di movimento
+      m_SplitPage.m_bOnAuxTab = Not m_SplitPage.m_bOnAuxTab
+
+      ' se rientro nella fase di spostamenti allora nascondo la tavola di scarico
+      If Not m_SplitPage.m_bOnAuxTab Then
+         ' se ci sono pezzi sulla tavola di scarico non posso nasconderla
+         Dim LclLstOfUnldPart As New List(Of Integer)
+         If Not PartOnAuxTab(LclLstOfUnldPart, m_nCurrPhase) Then
+            EgtDisableModified()
+            ' nascondo la tavola di scarico
+            EgtSetStatus(m_nAuxTabId, GDB_ST.OFF)
+            ' Nascondo eventuali pezzi in parcheggio
+            HideParkedParts()
+            EgtEnableModified()
+         End If
+      Else
+         ' Assegnazione delle info tavola ausiliaria alla dispozione corrente
+         SetAuxTabInCurrDisposition()
+      End If
+
+      ' Mantengo la fase che è stata creata e passo a gestire solo la visualizzazione dei bottoni
+      RefreshVisibility()
+      EgtZoom(ZM.ALL, True)
+   End Sub
+
    Private Sub StepMoveTxBx_EgtClosed(sender As Object, e As EventArgs) Handles StepMoveTxBx.EgtClosed
       Dim dStep As Double
       If StringToLen(StepMoveTxBx.Text, dStep) Then
@@ -823,16 +889,16 @@ Public Class MoveRawPartPage
       Dim ptRef As Point3d
       If Not EgtGetInfo(nRefId, "Pos", ptRef) Then Return
       Dim sCorn As String = ""
-      EgtGetInfo( nRefId, "COR", sCorn)
-      Select sCorn
-      Case "TL"
-         nCorn = MCH_CR.TL
-      Case "TR"
-         nCorn = MCH_CR.TR
-      Case "BL"
-         nCorn = MCH_CR.BL
-      Case "BR"
-         nCorn = MCH_CR.BR
+      EgtGetInfo(nRefId, "COR", sCorn)
+      Select Case sCorn
+         Case "TL"
+            nCorn = MCH_CR.TL
+         Case "TR"
+            nCorn = MCH_CR.TR
+         Case "BL"
+            nCorn = MCH_CR.BL
+         Case "BR"
+            nCorn = MCH_CR.BR
       End Select
       ' Recupero il centro del grezzo
       Dim ptRawCen As Point3d
@@ -1009,8 +1075,44 @@ Public Class MoveRawPartPage
    End Function
 
    Private Sub PauseBtn_Click(sender As Object, e As RoutedEventArgs) Handles PauseBtn.Click
+      ' verifico la presenza di eventuali pezzi sulla tavola di scarico
+      Dim LclLstOfUnldPart As New List(Of Integer)
+      PartOnAuxTab(LclLstOfUnldPart, m_nCurrPhase)
+      If Not InsertPauseInCurrPhase() Then Return
+      AddNewPhase()
+   End Sub
+
+   ' restituisce la lista dei pezzi che sono sulla tavola di scarico nella fase indicata
+   Private Function PartOnAuxTab(ByRef ListOfUnloadedPatr As List(Of Integer), nPhase As Integer) As Boolean
+      m_IsCurrPhaseUnloaded = False
+      ' Area tavolo ausiliario
+      Dim b3AuxTab As New BBox3d
+      EgtGetBBoxGlob(EgtGetFirstNameInGroup(m_nAuxTabId, "A1"), GDB_BB.STANDARD, b3AuxTab)
+      ' Area pezzi 
+      Dim nOtherRaw As Integer = EgtGetFirstRawPart()
+      While nOtherRaw <> GDB_ID.NULL
+         If EgtVerifyRawPartPhase(nOtherRaw, nPhase) Then
+            Dim b3OtherRaw As New BBox3d
+            ' EgtGetRawPartBBox(nOtherRaw, b3OtherRaw)
+            EgtGetBBoxGlob(nOtherRaw, GDB_BB.STANDARD, b3OtherRaw)
+            ' se il centro del pezzo è sulla tavola di scarico
+            If b3OtherRaw.Center.y < b3AuxTab.Max().y Then
+               m_IsCurrPhaseUnloaded = True
+               ListOfUnloadedPatr.Add(nOtherRaw)
+               ' salvo l'info che indica che il pezzo deve essere scaricato
+               EgtSetInfo(nOtherRaw, "Unloaded", 1)
+               'Exit While
+            End If
+         End If
+         nOtherRaw = EgtGetNextRawPart(nOtherRaw)
+      End While
+      Return m_IsCurrPhaseUnloaded
+   End Function
+
+   ' inserisce una pausa nella fase corrente
+   Private Function InsertPauseInCurrPhase() As Boolean
       ' verifico che ci sia almeno un elemto selezionato (dati di aggancio pezzo)
-      If m_RawMoveDataList.Count = 0 Then Return
+      If m_RawMoveDataList.Count = 0 Then Return False
       ' verifico che sia stato inseito almeno uno spostamento, altrimenti lo rimuovo
       Dim Index As Integer = 0
       For Index = m_RawMoveDataList.Count - 1 To 0 Step -1
@@ -1019,8 +1121,9 @@ Public Class MoveRawPartPage
          End If
       Next
       ' verifico che la lista non sia vuota
-      If m_RawMoveDataList.Count = 0 Then Return
-
+      If m_RawMoveDataList.Count = 0 Then
+         Return False
+      End If
       ' recupero disposizione fase corrente
       Dim nDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
       ' imposto la pausa nella disposizione corrente
@@ -1028,30 +1131,22 @@ Public Class MoveRawPartPage
       ' aggiungo al gruppo disposizione dei sottogruppi con i dati di movimento dei grezzi spostati
       SaveMoveInfoInDisposition(nDispId, m_RawMoveDataList)
       ' imposto eventuale movimento pezzi su tavola ausiliaria
-      SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
+      SaveMovePartsOnAuxTable(nDispId, m_IsCurrPhaseUnloaded)
+      ' SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
       '' Eseguo calcolo speciale dei movimenti: per tavola multicut
       'SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
+      SaveRemoveByHandInDisposition(nDispId, False)
+      Return True
+   End Function
 
+   ' crea una nuvoa fase/disposizione, la rende corrente, ricalcolo i grezzi e le lavorazioni della nuova fase
+   Private Function AddNewPhase() As Boolean
       ' Creo nuova fase
       Dim nNewPhase As Integer = EgtAddPhase()
-
-      ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
-      Dim nRawId As Integer = EgtGetFirstRawPart()
-      While nRawId <> GDB_ID.NULL
-         ' se il grezzo è presente nella fase precedente e non è quello selezionato allora procedo a creare una copia nella nuova fase
-         If EgtVerifyRawPartPhase(nRawId, nNewPhase - 1) Then
-            Dim bKeepRawPart As Boolean = True
-            For Each RawOnAuxTabData As RawMoveData In m_RawMoveDataList
-               If nRawId = RawOnAuxTabData.m_nId Then
-                  bKeepRawPart = False
-                  Exit For
-               End If
-            Next
-            If bKeepRawPart Then EgtKeepRawPart(nRawId, nNewPhase - 1)
-         End If
-         ' passo al successivo grezzo
-         nRawId = EgtGetNextRawPart(nRawId)
-      End While
+      ' Carico i grezzi rimasti sulla tavola nella nuova fase
+      ChangePhaseRawPart(nNewPhase)
+      ' Sposto le lavorazioni rimaste nella nuova fase
+      ChangeOperationPhase(nNewPhase)
 
       Dim nCurrDisposition As Integer = EgtGetPhaseDisposition(nNewPhase)
       'SetPause(nCurrDisposition)
@@ -1062,8 +1157,43 @@ Public Class MoveRawPartPage
       SetAuxTabInCurrDisposition()
       ' ripulisco la lista degli spostamenti
       m_RawMoveDataList.Clear()
+      m_IsCurrPhaseUnloaded = False
       ' aggiorno la fase corrente
       m_nCurrPhase = EgtGetCurrPhase()
+      Return True
+   End Function
+
+   ' Copio i grezzi rimasti sulla tavola nella fase successiva
+   Private Sub ChangePhaseRawPart(ByVal nNewPhase As Integer)
+      ' recupero l'elenco dei pezzi che sono stati scaricati sulla tavola
+      Dim LocalLstOfUnldPart As New List(Of Integer)
+      PartOnAuxTab(LocalLstOfUnldPart, nNewPhase - 1)
+      ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
+      Dim nRawId As Integer = EgtGetFirstRawPart()
+      While nRawId <> GDB_ID.NULL
+         ' se il grezzo è presente nella fase precedente e non è quello selezionato allora procedo a creare una copia nella nuova fase
+         If EgtVerifyRawPartPhase(nRawId, nNewPhase - 1) Then
+            Dim bKeepRawPart As Boolean = True
+            For Each RawOnAuxTabData As RawMoveData In m_RawMoveDataList
+               If nRawId = RawOnAuxTabData.m_nId Then
+                  ' se il pezzo è stato scaricato allora non deve essere riportato nella fase successiva
+                  For Each UnloadPart As Integer In LocalLstOfUnldPart
+                     If nRawId = UnloadPart Then
+                        ' salvo l'info che indica che il pezzo deve essere scaricato
+                        EgtSetInfo(nRawId, "Unloaded", 1)
+                        bKeepRawPart = False
+                        Exit For
+                     End If
+                  Next
+                  'bKeepRawPart = False
+                  Exit For
+               End If
+            Next
+            If bKeepRawPart Then EgtKeepRawPart(nRawId, nNewPhase - 1)
+         End If
+         ' passo al successivo grezzo
+         nRawId = EgtGetNextRawPart(nRawId)
+      End While
    End Sub
 
    Private Sub ResetBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetBtn.Click
@@ -1079,6 +1209,8 @@ Public Class MoveRawPartPage
       EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAngRaw)
       AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
       RemoveRawMoveData(nRawId, m_RawMoveDataList)
+      ' elimino l'info che indica che il pezzo è scaricato sulla tavola
+      EgtRemoveInfo(nRawId, "Unloaded")
       ' Disabilito pezzo e nascondo le ventose
       EgtSetStatus(nRawId, GDB_ST.ON_)
       EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
@@ -1111,6 +1243,14 @@ Public Class MoveRawPartPage
          m_nCurrPhase -= 1
          m_bPrev = False
          m_SplitPage.m_bShow = True
+         m_SplitPage.m_bOnAuxTab = True
+         ' imposto la visibilità della tavola ausiliaria
+         SetAuxTabInCurrDisposition()
+         ' carico le info di disposizione dei pezzi
+         m_RawMoveDataList.Clear()
+         m_bRemovedRaw = GetRemoveByHandInDisposition(m_nCurrDisposition)
+         GetMoveInfoInDisposition(m_nCurrDisposition, m_RawMoveDataList)
+         RefreshVisibility()
          EgtDraw()
          Return
       End If
@@ -1141,18 +1281,53 @@ Public Class MoveRawPartPage
          Return
       End If
 
-      ' se la disposizione corrente è sulla tavola ausiliaria allora lo sarà anche quella successiva
-      If IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 Then
-         EgtSetCurrPhase(m_nCurrPhase + 1)
-         m_nCurrDisposition = EgtGetNextOperation(m_nCurrDisposition)
-         m_nCurrPhase += 1
-         m_bToNext = False
-         m_SplitPage.m_bShow = True
-         EgtDraw()
-         EnableButtons()
-         Return
+      ' ------- VISUALIZZAZIONE -------
+      If m_SplitPage.m_bShow Then
+         ' verifico se la fase successiva è uno scarico frontale
+         If NextOperationIsUnloading(m_nCurrDisposition) Then
+            ' imposto la nuova fase (che è stata modificata all'interno della funzione di controllo)
+            EgtSetCurrPhase(m_nCurrPhase)
+            ' carico i dati di movimento dei pezzi nella fase corrente
+            m_RawMoveDataList.Clear()
+            m_bRemovedRaw = GetRemoveByHandInDisposition(m_nCurrDisposition)
+            GetMoveInfoInDisposition(m_nCurrDisposition, m_RawMoveDataList)
+            EgtDraw()
+            EnableButtons()
+            Return
+         ElseIf IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 AndAlso Not NextOperationIsUnloading(m_nCurrDisposition) Then
+            ' imposto la nuova fase, al termine della Sub verrà caricata la pagina Split nella fase indicata ora
+            m_bToNext = True
+            m_nCurrPhase += 1
+            EgtSetCurrPhase(m_nCurrPhase)
+            EgtDraw()
+         End If
       End If
 
+      ' -------     MODIFICA    -------
+      If Not m_SplitPage.m_bShow Then
+         ' se la tavola di scarico presente oppure ci sono pezzi sulla tavola di scarico
+         Dim LclLstOfUnldPart As New List(Of Integer)
+         If m_SplitPage.m_bOnAuxTab Or PartOnAuxTab(LclLstOfUnldPart, m_nCurrPhase) Then
+            ' se ci sono pezzi sulla tavola di scarico prima di procedere inserisco una pausa e creo una nuoava fase
+            If m_IsCurrPhaseUnloaded AndAlso InsertPauseInCurrPhase() Then AddNewPhase()
+            ' nascondo la tavola di scarico
+            EgtDisableModified()
+            EgtSetStatus(m_nAuxTabId, GDB_ST.OFF)
+            EgtEnableModified()
+         End If
+         m_bToNext = True
+         '' se la disposizione corrente è sulla tavola ausiliaria allora lo sarà anche quella successiva
+         'If IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 Then
+         '   EgtSetCurrPhase(m_nCurrPhase + 1)
+         '   m_nCurrDisposition = EgtGetNextOperation(m_nCurrDisposition)
+         '   m_nCurrPhase += 1
+         '   m_bToNext = False
+         '   m_SplitPage.m_bShow = True
+         '   EgtDraw()
+         '   EnableButtons()
+         '   Return
+         'End If
+      End If
       ' resetto l'inidice del pezzo da mnovimentare
       m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
@@ -1195,7 +1370,7 @@ Public Class MoveRawPartPage
       ' disabilito bottone
       ModifyBtn.IsEnabled = False
       ' gestione abilitazione altri bottoni
-      EnableButtons()
+      EnableButtons(MachiningList.Count > 0)
    End Sub
 
    ' verifica se la disposizione indicata è uno scarico sulla tavola ausiliaria
@@ -1206,6 +1381,20 @@ Public Class MoveRawPartPage
       Return bVal
    End Function
 
+   ' restituisce e attiva la successiva disposizione se è uno scarico frontale
+   Public Function NextOperationIsUnloading(nCurrDispId As Integer) As Boolean
+      ' recupero la primo operazione successiva
+      Dim nNextIdOperation As Integer = EgtGetNextOperation(nCurrDispId)
+      ' a partire da questa cerco la prima disposizione disponibile
+      Dim nNextIdDips As Integer = GetNextDisposition(nNextIdOperation)
+      If nNextIdDips = nNextIdOperation And IsDispUnloadOnAuxTab(nNextIdOperation) Then
+         m_nCurrPhase += 1
+         m_nCurrDisposition = nNextIdOperation
+         Return True
+      End If
+      Return False
+   End Function
+
    ' recupero la prima disposizione disponibile tra l'elenco delle operazioni presenti
    Public Function GetNextDisposition(nCurrDisposId As Integer) As Integer
       Dim nDispId As Integer = nCurrDisposId
@@ -1218,7 +1407,7 @@ Public Class MoveRawPartPage
       Return GDB_ID.NULL
    End Function
 
-   Private Sub EnableButtons()
+   Private Sub EnableButtons(Optional bExistsMachining As Boolean = False)
       UpBtn.IsEnabled = Not m_SplitPage.m_bShow
       LeftBtn.IsEnabled = Not m_SplitPage.m_bShow
       RightBtn.IsEnabled = Not m_SplitPage.m_bShow
@@ -1234,19 +1423,35 @@ Public Class MoveRawPartPage
       BottomRBtn.IsEnabled = Not m_SplitPage.m_bShow
       PauseBtn.IsEnabled = Not m_SplitPage.m_bShow
       ResetBtn.IsEnabled = Not m_SplitPage.m_bShow
+      UnloadPartsBtn.IsEnabled = Not m_SplitPage.m_bShow
       If m_SplitPage.m_bShow Then
          NextBtn.IsEnabled = (m_nCurrPhase < EgtGetPhaseCount())
       Else
-         NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
+         ' Se esistono delle lavorazioni allora abilito il pulsante per procedere
+         If Not bExistsMachining Then
+            NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
+         Else
+            NextBtn.IsEnabled = True
+         End If
+
       End If
    End Sub
 
+   ' esco dalla pagina di scarico
    Private Sub MoveRawPartPage_Unloaded(sender As Object, e As EventArgs) Handles Me.Unloaded
       ' verifico che la fase corrente non sia vuota
       Dim nLastDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
-      If EgtIsOperationEmpty(nLastDispId) And m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
-         EgtErase(nLastDispId)
-      End If
+
+      '' se sono in visualizzazione allora non elimino essuna operazione
+      'If Not m_SplitPage.m_bShow Then
+      '   If EgtIsOperationEmpty(nLastDispId) And Not m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
+      '      EgtErase(nLastDispId)
+      '   ElseIf EgtIsOperationEmpty(nLastDispId) And m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
+      '      ' Dichiaro pagina non attiva
+      '      m_bActive = False
+      '      Return
+      '   End If
+      'End If
 
       ' Se movimento con ventose
       If Not m_bByHand Then
@@ -1262,8 +1467,9 @@ Public Class MoveRawPartPage
             SaveMoveInfoInDisposition(nDispId, m_RawMoveDataList)
             ' imposto eventuale presenza rimozioni manuali
             SaveRemoveByHandInDisposition(nDispId, m_bRemovedRaw)
-            ' imposto eventuale movimento pezzi su tavola ausiliaria
-            SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
+            ' imposto eventuale movimento pezzi su tavola ausiliaria (se è realmente avvenuto)
+            'SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)            
+            SaveMovePartsOnAuxTable(nDispId, m_IsCurrPhaseUnloaded)
             ' Eseguo calcolo speciale dei movimenti
             SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
          End If
@@ -1279,13 +1485,18 @@ Public Class MoveRawPartPage
             SpecialApplyDisposition(nDispId, True)
          End If
       End If
+
       ' Nascondo eventuale tavola ausiliaria
       If m_SplitPage.m_bOnAuxTab Then
          EgtDisableModified()
          EgtSetStatus(m_nAuxTabId, GDB_ST.OFF)
          EgtEnableModified()
-         EgtZoom(ZM.ALL, False)
-         If Not m_bPrev Then
+         ' se sto uscendo dalla pagina delle spezzature
+         If Not m_bPrev And Not m_bToNext Then
+            Dim nDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+            ' se sto uscendo dalla pagina split (senza passare dal comando next) 
+            Dim lclLstUnlPart As New List(Of Integer)
+            SaveMovePartsOnAuxTable(nDispId, PartOnAuxTab(lclLstUnlPart, m_nCurrPhase))
             ' Cancello eventuale manipolatore pezzi
             EgtDisableModified()
             RemoveVacuumCups()
@@ -1302,10 +1513,30 @@ Public Class MoveRawPartPage
          m_bPrev = False
          m_SplitPage.m_bShow = True
       End If
+
+      Dim Ph As Integer = EgtGetCurrPhase()
+      ' aggiorno il disegno
+      EgtZoom(ZM.ALL, False)
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
 
+   ' ----------------- TEST funzione per debug operazioni  -----------------
+   Private Sub SaveMyFileTest(sFilename As String)
+      LoadCurrPhaseMachining()
+      ' salvo il file corrente per poterlo studiare e capire cosa è successo nella rappresentazione dei grezzi
+      EgtSaveFile("C:\EgtData\OmagCUT\MyProjects\" & sFilename & ".nge", NGE.BIN)
+   End Sub
+
+   Private Sub LoadCurrPhaseMachining()
+      Dim m_MachiningList As New List(Of SplitMach)
+      'm_SplitPage.ShowMachiningList()
+      'm_SplitPage.SaveOrderMachinig(m_nCurrPhase)
+      ' Preparo la lista delle lavorazioni
+      CalculateSplitMachList(m_nCurrPhase, m_MachiningList)
+      Dim b As Boolean = False
+   End Sub
+
 End Class
 
 

CadCuts/NestPageUC.xaml.vb

@@ -1353,8 +1353,8 @@ Public Class NestPageUC
          VeinMatching.OnDeselectPart(m_nIdToDesel)
       End If
 
-
       ' Reset
+      GetFamilyGroupInPark()
       m_bDrag = False
       m_nIdToSel = GDB_ID.NULL
       m_nIdToDesel = GDB_ID.NULL

CadCuts/SplitAuto.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Forms.Integration
+Imports EgtUILib
 
 Public Module SplitAuto
 
@@ -132,7 +133,7 @@ Public Module SplitAuto
                      Mach.m_bStartAll = False
                      Mach.m_bEndAll = False
                   End If
-               ' Waterjet
+                  ' Waterjet
                ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then
                   Mach.m_nInterf = FMI_TYPE.NONE
                   ' recupero l'angolo di fianco
@@ -141,7 +142,7 @@ Public Module SplitAuto
                   Mach.m_bCanEndAll = False
                   Mach.m_bStartAll = False
                   Mach.m_bEndAll = False
-               ' Forature e fresature
+                  ' Forature e fresature
                Else
                   Mach.m_nInterf = FMI_TYPE.NONE
                   Mach.m_dSideAng = 0
@@ -156,7 +157,7 @@ Public Module SplitAuto
                Mach.m_bPause = GetPause(nOperId)
                ' inserisco in lista
                MachSplitList.Add(Mach)
-            ' altrimenti la disattivo
+               ' altrimenti la disattivo
             Else
                EgtSetOperationMode(nOperId, False)
             End If
@@ -194,7 +195,7 @@ Public Module SplitAuto
 
    Private Sub ColorSingleMachining(nOperId As Integer, sLay As String, dSideAng As Double, bEnabled As Boolean, nInterf As Integer)
       ' Verifico se è un taglio da sopra o da sotto
-      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or ( sLay = NAME_INLOOP AndAlso EgtExistsInfo( nOperId, INFO_FILOTOP)))
+      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or (sLay = NAME_INLOOP AndAlso EgtExistsInfo(nOperId, INFO_FILOTOP)))
       Dim bDrip As Boolean = (sLay = NAME_DRIPCUT Or sLay = NAME_UNDERDRILL)
       ' Recupero il preview della lavorazione
       Dim nPvId As Integer = GDB_ID.NULL
@@ -219,11 +220,11 @@ Public Module SplitAuto
             Next
             EgtSetColor(nDwnCutId, COL_MCH_DISABLED)
             Dim bFreeStart As Boolean = (nInterf And FMI_TYPE.LI) <> FMI_TYPE.LI
-            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
-            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
             Dim bFreeEnd As Boolean = (nInterf And FMI_TYPE.LO) <> FMI_TYPE.LO
-            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
-            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
          Else
             Dim colCut As Color3d
             If bOnMach Then
@@ -342,6 +343,7 @@ Public Module SplitAuto
       Dim ptOri As Point3d
       EgtGetTableRef(1, ptOri)
       Dim vtOri As New Vector3d(ptOri.x, ptOri.y, ptOri.z)
+      ' ---------------------------------- GREZZI ----------------------------------
       ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
       Dim nRawId As Integer = EgtGetFirstRawPart()
       While nRawId <> GDB_ID.NULL
@@ -393,10 +395,19 @@ Public Module SplitAuto
          ' passo al successivo grezzo
          nRawId = EgtGetNextRawPart(nRawId)
       End While
+      ' ---------------------------------- GREZZI ----------------------------------
       ' Cancello preview dei tagli allungati dalla lavorazione
       For Each nCut As Integer In vCuts
          RemoveMachiningPreview(nCut)
       Next
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      ChangeOperationPhase(nNewPhase)
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      Return True
+   End Function
+
+   ' Sposta le lavorzioni della fase precedente a quella indicata
+   Friend Sub ChangeOperationPhase_ERR(nNewPhase As Integer)
       ' Sposto tutte le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
       Dim nId = EgtGetFirstOperation()
       While nId <> GDB_ID.NULL
@@ -417,9 +428,50 @@ Public Module SplitAuto
          End If
          nId = nNextId
       End While
-      Return True
-   End Function
+   End Sub
 
+   ' Miglioramento della gestione delle lavorazioni
+   Friend Sub ChangeOperationPhase(nNewPhase As Integer)
+      ' creo l'elenco delle lavorazioni che devono essere sposate
+      Dim MchList As New List(Of Integer)
+      ' Recupero le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
+      Dim nId = EgtGetFirstOperation()
+      While nId <> GDB_ID.NULL
+         Dim nNextId = EgtGetNextOperation(nId)
+         If IsValidMachining(nId) And EgtGetOperationPhase(nId) = nNewPhase - 1 And EgtExistsInfo(nId, INFO_MCH_USER_OFF) Then
+            ' Provo ad inserire la lavorazione nell'elenco
+            AddMach(MchList, nId)
+            ' sposto le inglobate
+            Dim sInfo As String = String.Empty
+            If EgtGetInfo(nId, INFO_MCH_OTHMID, sInfo) Then
+               Dim sItems() As String = sInfo.Split(",".ToCharArray)
+               For Each sId2 As String In sItems
+                  Dim nId2 As Integer = 0
+                  StringToInt(sId2, nId2)
+                  If nId2 > 0 Then
+                     ' Provo ad inserire la lavorazione nell'elenco
+                     AddMach(MchList, nId2)
+                  End If
+               Next
+            End If
+         End If
+         nId = nNextId
+      End While
+      ' Procedo ora a spostare le lavorazioni nella nuova disposizione
+      For Each ItemMchId As Integer In MchList
+         EgtChangeOperationPhase(ItemMchId, nNewPhase)
+      Next
+   End Sub
+
+   ' Inserisce gli inidici delle lavorazioni evitando di inserire dei doppioni
+   Private Sub AddMach(MchList As List(Of Integer), IdMch As Integer)
+      For Each Item As Integer In MchList
+         If IdMch = Item Then
+            Return
+         End If
+      Next
+      MchList.Add(IdMch)
+   End Sub
    '-----------------------------------------------------------------------------------------------
    Friend Function CalculateSplitAuto() As Boolean
       ' Fase iniziale

CadCuts/SplitPageUC.xaml.vb

@@ -13,7 +13,7 @@ Public Class SplitPageUC
    ' Tipo movimento dei grezzi (manuale o con testa ventosa)
    Private m_bByHand As Boolean = True
    ' Abilitazione movimento finale pezzi su tavola ausiliaria
-   Private m_bEnableOnAuxTab As Boolean = False
+   Friend m_bEnableOnAuxTab As Boolean = False
    ' Stato
    Private m_nCurrPhase As Integer = 0
    Private m_MachiningList As New List(Of SplitMach)
@@ -49,6 +49,7 @@ Public Class SplitPageUC
    Private m_bModified As Boolean = False
    Private m_nNbrGrpId As Integer = GDB_ID.NULL
    Private m_bToNext As Boolean = False
+   Private m_bToPrev As Boolean = False
    Friend m_bOnAuxTab As Boolean = False
    ' Drag
    Private m_nDragInd As Integer = -1
@@ -167,6 +168,7 @@ Public Class SplitPageUC
       m_bModified = False
       ' Reset flag tipo uscita
       m_bToNext = False
+      m_bToPrev = False
       ' Abilitazione bottoni
       EnableButtons()
       ' Se sola visualizzazione, segnalazione di eventuale fase di restart
@@ -180,7 +182,8 @@ Public Class SplitPageUC
       End If
    End Sub
 
-   Private Sub ShowMachiningList()
+   ' preparo la lista delle lavorazioni da mostrare in interfaccia
+   Public Sub ShowMachiningList()
       m_ItemList.Clear()
       For i As Integer = 1 To m_MachiningList.Count()
          Dim Mach As SplitMach = m_MachiningList(i - 1)
@@ -710,30 +713,8 @@ Public Class SplitPageUC
          MoveUpBtn.IsEnabled = False
          MoveDownBtn.IsEnabled = False
       End If
-
+      ' Recupero la selezione dei tagli correnti
       GetCurrSelection()
-
-      '' verifico che siano contigui
-      'Dim bContigus As Boolean = False
-      'Dim OrdIndex = 0
-      'OrdIndex = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1).Ind
-      '' recupero l'indice dell'ultimo elemento selezionato
-      'Dim LastSel As NameIdLsBxItem = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1)
-      'If MachiningLsBx.SelectedItems.Count = 1 Then
-      '   bContigus = True
-      'Else
-      '   For Each Item As NameIdLsBxItem In ItemList
-      '      If Item.Ind = LastSel.Ind + 1 Or Item.Ind = LastSel.Ind - 1 Then
-      '         bContigus = True
-      '      End If
-      '   Next
-      'End If
-      '' se non contiguo, elimino dai selezionati il primo(che è l'ultimo ad essere stato selezionato)
-      'If Not bContigus Then
-      '   ItemList.Remove(LastSel)
-      '   MachiningLsBx.SelectedItems.RemoveAt(MachiningLsBx.SelectedItems.Count - 1)
-      'End If
-
       ' resetto marcatura lavorazioni
       If m_CurrFirstInd > -1 Then
          For Index As Integer = m_CurrFirstInd To m_CurrLastInd
@@ -827,6 +808,8 @@ Public Class SplitPageUC
       Next
 
       VerifyHomogenousMachining(ItemList)
+      ' Abilitazione bottone Next
+      EnableButtons()
    End Sub
 
    Private Sub AllOnBtn_Click(sender As Object, e As RoutedEventArgs) Handles AllOnBtn.Click
@@ -1717,7 +1700,7 @@ Public Class SplitPageUC
          End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Si possono invertire solo i tagli di lama
-         If m_MachiningList(nI).m_nType <> MCH_OY.SAWING Then Continue For
+         If m_MachiningList(nI).m_nType <> MCH_OY.SAWING And m_MachiningList(nI).m_nType <> MCH_OY.WATERJETTING Then Continue For
          ' Non si possono invertire i tagli di lama inclinati
          If Math.Abs(m_MachiningList(nI).m_dSideAng) > 0.1 Then Continue For
          ' Se abilitata inversione automatica e quindi non invertito
@@ -1731,6 +1714,7 @@ Public Class SplitPageUC
                ResetEnableInvert(m_MachiningList(nI).m_nEntId)
                EgtErase(m_MachiningList(nI).m_nArrId)
                NumberDirectionMachining(nI, False)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
                EgtDraw()
             End If
             ' se altrimenti disabilitata inversione automatica e invertito
@@ -1742,6 +1726,7 @@ Public Class SplitPageUC
                SwapStartEndData(nI)
                EgtErase(m_MachiningList(nI).m_nArrId)
                NumberDirectionMachining(nI, False)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
                EgtDraw()
             End If
             ' altrimenti disabilitata inversione automatica e non invertito
@@ -1780,15 +1765,26 @@ Public Class SplitPageUC
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
       ' Dichiaro solo visualizzazione
       m_bShow = True
-      ' Esco 
-      ExitSplit(False)
+      '' Esco 
+      'ExitSplit(False)
       ' Torno alla fase precedente
-      EgtSetCurrPhase(EgtGetCurrPhase() - 1)
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      ' se questa è la prima fase, non possono tornare più indietro di così
+      If nCurrPhase = 1 Then
+         Return
+      End If
+      EgtSetCurrPhase(nCurrPhase - 1)
+      m_bToPrev = True
       ' Reimposto la precedente
-      SplitPageUC_Loaded(Nothing, Nothing)
+      'SplitPageUC_Loaded(Nothing, Nothing)
+      ' torno alla disposizione della fase corrente
+      m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(m_MainWindow.m_CadCutPageUC.m_SplitPage)
+      m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC.m_MoveRawPartPage)
+      m_MainWindow.m_CadCutPageUC.m_CadCutMode = CadCutPageUC.CadCutModes.MoveRawPart
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
+      ' ------- VISUALIZZAZIONE -------
       If m_bShow Then
          Dim CurrDisposition As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
          ' recupero l'operazione successiva
@@ -1910,7 +1906,7 @@ Public Class SplitPageUC
    Private Sub SplitPageUC_Unloaded(sender As Object, e As EventArgs) Handles Me.Unloaded
       m_bActive = False
       m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
-      ExitSplit(Not m_bToNext)
+      ExitSplit(Not m_bToNext And Not m_bToPrev)
       EgtDraw()
    End Sub
 
@@ -1929,22 +1925,7 @@ Public Class SplitPageUC
       EgtEnableModified()
       ' se modificato salvo ordine e stato delle lavorazioni
       If m_bModified Then
-         ' Al primo posto deve rimanere la disposizione della fase
-         Dim nFirstOperId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
-         For i As Integer = m_ItemList.Count() - 1 To 0 Step -1
-            Dim nI As Integer = m_ItemList(i).Ind
-            Dim nMchId As Integer = m_MachiningList(nI).m_nId
-            EgtRelocate(nMchId, nFirstOperId, GDB_POS.AFTER)
-            If m_MachiningList(nI).m_bEnabled Then
-               EgtSetOperationMode(m_MachiningList(nI).m_nId, True)
-               EgtRemoveInfo(m_MachiningList(nI).m_nId, INFO_MCH_USER_OFF)
-            Else
-               EgtSetOperationMode(m_MachiningList(nI).m_nId, False)
-               EgtSetInfo(m_MachiningList(nI).m_nId, INFO_MCH_USER_OFF, True)
-            End If
-         Next
-         ' dichiaro ordine salvato
-         m_MainWindow.m_CurrentProjectPageUC.SetOrderMachiningFlag()
+         SaveOrderMachinig(m_nCurrPhase)
       End If
       ' Affondamento ridotto
       Dim dReducedDepth As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_REDUCEDDEPTH, 1, m_MainWindow.GetMachIniFile())
@@ -1968,6 +1949,25 @@ Public Class SplitPageUC
       End If
    End Sub
 
+   Friend Sub SaveOrderMachinig(CurrPhase As Integer)
+      ' Al primo posto deve rimanere la disposizione della fase
+      Dim nFirstOperId As Integer = EgtGetPhaseDisposition(CurrPhase)
+      For i As Integer = m_ItemList.Count() - 1 To 0 Step -1
+         Dim nI As Integer = m_ItemList(i).Ind
+         Dim nMchId As Integer = m_MachiningList(nI).m_nId
+         EgtRelocate(nMchId, nFirstOperId, GDB_POS.AFTER)
+         If m_MachiningList(nI).m_bEnabled Then
+            EgtSetOperationMode(m_MachiningList(nI).m_nId, True)
+            EgtRemoveInfo(m_MachiningList(nI).m_nId, INFO_MCH_USER_OFF)
+         Else
+            EgtSetOperationMode(m_MachiningList(nI).m_nId, False)
+            EgtSetInfo(m_MachiningList(nI).m_nId, INFO_MCH_USER_OFF, True)
+         End If
+      Next
+      ' dichiaro ordine salvato
+      m_MainWindow.m_CurrentProjectPageUC.SetOrderMachiningFlag()
+   End Sub
+
    Friend Function GetDisabledCutsCount() As Integer
       ' Determino il numero di tagli disabilitati
       Dim nCount As Integer = 0
@@ -2032,7 +2032,7 @@ Public Class SplitPageUC
                NextBtn.IsEnabled = (GetDisabledCutsCount() > 0 And GetSplitCutsCount() = 1)
                ' Altrimenti
             Else
-               ' movimento standard sulla tavola (almeno un taglio disabilitato)
+               ' movimento standard sulla tavola (almeno un taglio disabilitato allora False)
                Dim bStdTab As Boolean = (GetDisabledCutsCount() > 0)
                ' movimento su tavola di scarico
                m_bOnAuxTab = Not bStdTab AndAlso (m_nCurrPhase = EgtGetPhaseCount() And m_bEnableOnAuxTab)
@@ -2198,6 +2198,7 @@ Public Class SplitPageUC
 
       ' gestione bottone per generazione ponticelli
       If Type = MCH_OY.WATERJETTING Then
+         InvertBtn.Visibility = Visibility.Visible
          ' siccome la stessa posizione è occupata da due comandi sovrapposti
          If CutStartBtn.Visibility = Visibility.Hidden Then
             BridgesWJBtn.Visibility = Visibility.Visible

CadCuts/VacuumCups.vb

@@ -546,16 +546,27 @@ Module VacuumCups
       Return True
    End Function
 
-   ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   ' assegnate le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
    Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
-      Dim dX, dY, dZ As Double
-      Dim nStat As Integer
+      ' Posizione Home dell'asse rotante
       Dim dCHome As Double
       EgtGetAxisHomePos("C", dCHome)
-      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      ' Corse dell'asse
+      Dim dCMin As Double
+      EgtGetAxisMin("C", dCMin)
+      Dim dCMax As Double
+      EgtGetAxisMax("C", dCMax)
+      ' Porto l'angolo nel range
+      Dim dRotAngMachDeg As Double = dRotAngDeg + dCHome
+      AdjustAngleInRange(dRotAngMachDeg, dCMin, dCMax)
+      ' Imposto la ventosa come fosse un utensile
       EgtSetCalcTool("", "H4", 1)
-      EgtGetCalcPositions(ptRef, dRotAngDeg + dCHome, 0, nStat, dX, dY, dZ)
-      EgtVerifyOutstroke(dX, dY, dZ, dRotAngDeg + dCHome, 0, nStat)
+      ' Calcolo gli assi macchina
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      EgtGetCalcPositions(ptRef, dRotAngMachDeg, 0, nStat, dX, dY, dZ)
+      ' Verifico le corse
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngMachDeg, 0, nStat)
       Return nStat
    End Function
 

Constants/ConstGen.vb

@@ -189,6 +189,8 @@ Module ConstGen
    Public Const INFO_TOPRODAREA As String = "ToProdArea"
    ' Info per nome progetti
    Public Const INFO_PROJNAME As String = "ProjName"
+   ' Info per parcheggio asse C
+   Public Const INFO_CAXESHOME As String = "CAxesHome"
 
    ' Nome layer delle regioni
    Public Const NAME_REGION As String = "Region"

Constants/ConstIni.vb

@@ -116,6 +116,8 @@ Module ConstIni
    Public Const K_LASTCOLOR As String = "LastColor"
    Public Const K_COLOR As String = "Color"
 
+   Public Const S_FRAMECOMPO As String = "FrameCompo"
+
    Public Const S_EXTCOMPO As String = "Compo"
 
    Public Const S_INTCOMPO As String = "InternalCompo"
@@ -204,6 +206,7 @@ Module ConstIni
    Public Const K_OFFSZ As String = "OffsZ"
    Public Const K_OFFSXY As String = "OffsXY"
    Public Const K_OFFSYY As String = "OffsYY"
+   Public Const K_OFFSXINTERY As String = "OffsYInterY"
    Public Const K_STARTTRIM As String = "StartTrim"
    Public Const K_ENDTRIM As String = "EndTrim"
    Public Const K_OTHERSIDE As String = "OtherSide"
@@ -223,6 +226,12 @@ Module ConstIni
    Public Const K_RAWOFFSX As String = "OffsX"
    Public Const K_RAWOFFSY As String = "OffsY"
    Public Const K_RAWKERF As String = "Kerf"
+   Public Const K_ENABLEOTHERREFTAB As String = "EnableOtherRefTab"
+   Public Const K_OTHERREFTAB As String = "OtherRefTab"
+   Public Const K_OTHERREFTABX As String = "OtherRefTabX"
+   Public Const K_OTHERREFTABY As String = "OtherRefTabY"
+   Public Const K_OTHERREFTABPOS As String = "OtherRefTabPos"
+
 
    Public Const S_RAWMOVE As String = "RawMove"
    Public Const K_RAWSTEP As String = "Step"
@@ -332,6 +341,7 @@ Module ConstIni
    Public Const K_DC_TEST_OFFSET As String = "TestOffset"
    Public Const K_DC_OFFSET_SQUARING As String = "OffsetSquaring"
    Public Const K_DC_EXTRA_LEN_SQUARING As String = "ExtraLenSquaring"
+   Public Const K_ENABLEINVERT As String = "EnableInvert"
 
    Public Const S_STATDATA As String = "StatData"
    Public Const K_SD_DAY As String = "Day"

Constants/ConstMachIni.vb

@@ -46,6 +46,13 @@
    Public Const K_THREADSLEEP As String = "ThreadSleep"
    Public Const K_PHOTODELEY As String = "PhotoDeley"
 
+   Public Const S_NCFANUC As String = "NcFanuc"
+   Public Const K_SETNCMODE As String = "SetNcMode"
+   Public Const K_BASEADDRINT As String = "BaseAddrInt"
+   Public Const K_BASEADDRBIT As String = "BaseAddrBit"
+   Public Const K_NUMVARINT As String = "NumVarInt"
+   Public Const K_NUMVARBIT As String = "NumVarBit"
+
    Public Const S_EXECLUA As String = "ExecLua"
    Public Const K_FILESCRIPT_LUA As String = "FileScript"
 
@@ -78,6 +85,7 @@
    Public Const K_TABLEDOWN As String = "TableDown"
    Public Const K_MANUAL As String = "Manual"
    Public Const K_DOORCLOSED As String = "DoorClosed"
+   Public Const K_DOOROPENDED As String = "DoorOpened"
    Public Const K_LIMITZ As String = "LimitZ"
    Public Const K_POWEROVR As String = "PowerOvr"
    Public Const K_PARKING As String = "Parking"
@@ -112,6 +120,7 @@
    Public Const K_FEEDHOLD As String = "FeedHold"
    Public Const K_SPOTLIGHT1 As String = "SpotLight1"
    Public Const K_SPOTLIGHT2 As String = "SpotLight2"
+   Public Const K_NAXES As String = "nAxes"
    ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
    Public Const K_XYJOG As String = "XYJog"
@@ -142,6 +151,10 @@
    Public Const K_PRODLIPROBINGTCPOS2VAR As String = "ProbingTcPos2Var"
    Public Const K_PRODLISAWDIAMETER2VAR As String = "SawDiameter2Var"
 
+   Public Const S_POLISHLINE As String = "PolishLine"
+   Public Const K_CLICKSTATE As String = "ClickState"
+   Public Const k_CLICKDIR As String = "ClickDir"
+
    Public Const S_STATISTICS As String = "Stats"
    Public Const K_DATADIR As String = "DataDir"
    Public Const K_SHOWAREAS As String = "ShowAreas"
@@ -223,6 +236,7 @@
    Public Const K_HOLES_OFFSETWJ As String = "HolesOffsetWJ"
    Public Const K_MIN_RADIUSWJ As String = "MinRadiusWJ"
    Public Const K_MACH_DRILLINGWJ_ON_CORNERS As String = "DrillingWJOnCorners"
+   Public Const K_MACH_RECTIFICATION_ON_SUBSQUARE As String = "RectificationSubSqWJ"
    ' DrillMillC90
    ' CutLongDxSx
    ' AngRotMultiCut
@@ -270,6 +284,7 @@
    Public Const S_MACH_PROBING As String = "Probing"
    Public Const K_PROBINGSTATEVAR As String = "ProbingStateVar"
    Public Const K_SAWDIAMETER As String = "SawDiameter"
+   Public Const K_TOOLLENGTH As String = "ToolLength"
    Public Const K_RAWTHICKNESS As String = "RawThickness"
    Public Const K_ENABLERAWPROBE As String = "EnableRawProbe"
 

DirectCuts/ControlsDirectCutUC.xaml.vb

@@ -140,8 +140,11 @@ Public Class ControlsDirectCutUC
          Return
       End If
 
-      ' Caso standard
-      m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      If m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.MachineButtonUC Or
+         m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.VacuumButtonUC Then
+         ' Caso standard
+         m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      End If
 
       ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
       Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -76,6 +76,11 @@ Public Class ControlsMachineButtonUC
       End If
    End Sub
 
+#Region "STATE CHANGED"
+   ' ------------------------------------------------------------------------------
+   ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
+   '-------------------------------------------------------------------------------
+
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim SpindleButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
@@ -255,38 +260,34 @@ Public Class ControlsMachineButtonUC
       Dim DoorOpenedButton As ThreeStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_DOORCLOSED Then
-            'If TypeOf MachineButton Is NoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, NoStateButton)
-            'ElseIf TypeOf MachineButton Is TwoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, TwoStateButton)
-            'ElseIf TypeOf MachineButton Is ThreeStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, ThreeStateButton)
-            'ElseIf TypeOf MachineButton Is DoubleCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, DoubleCommandButton)
-            'ElseIf TypeOf MachineButton Is PressedCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, PressedCommandButton)
-            'End If
             DoorClosedButton = MachineButton
          End If
-         If MachineButton.StateFlag = "DoorOpened" Then
+         If MachineButton.StateFlag = K_DOOROPENDED Then
             DoorOpenedButton = MachineButton
          End If
       Next
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorClosedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_Red")
             Case 1, 2
+               ' porta in movimento/aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
          End Select
       End If
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorOpenedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
             Case 1
+               ' porta in movimento 
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Yellow")
             Case 2
+               ' porta chiusa
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Green")
          End Select
       End If
@@ -372,6 +373,7 @@ Public Class ControlsMachineButtonUC
       'End If
    End Sub
 
+#End Region    ' State Range
 
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
@@ -569,13 +571,64 @@ Public MustInherit Class MachineButton
                   EgtOutLog("dopo scrittura seconda variabile")
                End If
                Return
+            Case 4
+               ' ------------------------------------ FANUC ------------------------------------
+               ' eventuale scrittura di linea di comando MDI
+               If Not String.IsNullOrEmpty(CmdString) Then
+                  ' attivo mpdalità MDI
+                  m_CN.DGeneralFunctions_WriteCncMode(2)
+                  System.Threading.Thread.Sleep(100)
+                  ' salvo la stringa di comando ricevuta dal file lua
+                  m_CN.sz_ManualDataInput = CmdString
+                  ' esguo la funzione che ha il compito di scrivere il comando MDI
+                  m_CN.MDI_command()
+               End If
+               ' attivo modalità AUTO
+               m_CN.DGeneralFunctions_WriteCncMode(7)
+               System.Threading.Thread.Sleep(100)
+               If String.IsNullOrEmpty(EValue) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue As Boolean
+                     If EValue.Trim = "1" Then bEValue = True
+                     m_CN.NC_write_var_bit(ENumber, CBool(EValue))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber, CShort(EValue))
+                  End If
+                  EgtOutLog("Fanuc_DNumber= " & ENumber & " DValue= " & EValue)
+               End If
+               ' eventale caricamento seconda variabile
+               If String.IsNullOrEmpty(EValue2) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber2)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber2)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber2.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue2 As Boolean
+                     If EValue2.Trim = "1" Then bEValue2 = True
+                     m_CN.NC_write_var_bit(ENumber2, CBool(EValue2))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber2, CShort(EValue2))
+                  End If
+                  EgtOutLog("Fanuc_DNumber2= " & ENumber2 & " DValue2= " & EValue2)
+               End If
+               Return
          End Select
       End If
       '--------------------------------------------------------- MDI ---------------------------------------------------------
       Dim nResult As Short
       ' assegno la modalità di funzionamento
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
-         Case 1, 2
+         Case 1, 2, 4
             nResult = m_CN.DGeneralFunctions_WriteCncMode(2)     ' Modalità MDI per controlli num
          Case 3
             'Per il siemens non devo fare nulla
@@ -599,7 +652,7 @@ Public MustInherit Class MachineButton
          m_CN.DGeneralFunctions_CycleStart()
       End If
       System.Threading.Thread.Sleep(300)
-      ' riprostino la modalità manuale
+      ' ripristino la modalità manuale..?? siucuri ??
       nResult = m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
    End Sub
 
@@ -620,6 +673,7 @@ Public MustInherit Class MachineButton
          EgtTdbGetCurrToolParam(MCH_TP.FEED, dFeed)
       End If
       EgtLuaSetGlobNumVar("CMD.F", dFeed)
+
       Dim dSpeed As Double = 0
       If Not String.IsNullOrWhiteSpace(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text) Then
          StringToDouble(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text, dSpeed)
@@ -628,6 +682,18 @@ Public MustInherit Class MachineButton
          EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)
@@ -789,6 +855,7 @@ Public Class NoStateButton
             ExecuteMDICommand(TLuaScriptName)
          End If
       Else
+         ' FANUC, SIEMENS
          ExecuteMDICommand(TLuaScriptName)
       End If
    End Sub

DirectCuts/DirectCutPageUC.xaml

@@ -219,7 +219,10 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
             <!--<ColumnDefinition Width="1*"/>-->
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
@@ -263,9 +266,11 @@
               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
             <Image Source="{DynamicResource ParkingImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
+          
+          
 
          <!--Comando Manula/MDI-->
-         <Button Name="ManualModeBtn" Grid.Column="8"
+         <Button Name="ManualModeBtn" Grid.Column="11"
                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
             <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </Button>

DirectCuts/DirectCutPageUC.xaml.vb

@@ -53,7 +53,7 @@ Public Class DirectCutPageUC
 
       'Posizionemento nella griglia delle Page UserControl
       m_MachineButtons.SetValue(Grid.RowProperty, 2)
-      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 7)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, m_MachineButtons.nCountButton)
       m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
 
       m_ControlsDirectCutUC.SetValue(Grid.RowProperty, 1)
@@ -64,12 +64,18 @@ Public Class DirectCutPageUC
       ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [ControlMachButtons])
       Dim bCollapsedNewBottonsConsole As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons("JogButtons", "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
+      ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [VacuumMachButtons])
+      Dim bCollapsedVacuumButton As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_VACUUMMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       If Not m_NewMachineButtonsType Then
          'Assegno MachineButtons alla pagina
          LowerButtonGrid.Children.Add(m_MachineButtons)
          ControlsMachineBtn.Visibility = Windows.Visibility.Collapsed
          VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
       End If
+      ' se non sono configurate le ventose allora nascondo il comando
+      If m_NewMachineButtonsType AndAlso bCollapsedVacuumButton Then
+         VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
+      End If
 
       ' nuovi bottoni 20/05/2021 - modifica specifiche 04/08/2021
       ' leggo il numero di assi attivi nella macchina
@@ -209,6 +215,7 @@ Public Class DirectCutPageUC
          m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
          m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
          MachineButtonGrid.Children.Add(m_ControlsMachineButton)
+         m_ActiveControl = Controls.MachineButtonUC
          If VacuumMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
             VacuumMachineBtn.IsChecked = False
@@ -221,6 +228,7 @@ Public Class DirectCutPageUC
    Private Sub VacuumMachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles VacuumMachineBtn.Click
       If VacuumMachineBtn.IsChecked Then
          MachineButtonGrid.Children.Add(m_VacuumMachineButton)
+         m_ActiveControl = Controls.VacuumButtonUC
          If ControlsMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
             ControlsMachineBtn.IsChecked = False
@@ -417,12 +425,14 @@ Public Class DirectCutPageUC
       If m_bShowMachine Then
          ' aggiorno lo stato
          Select Case m_nMachLook
-         Case MCH_LOOK.ALL
-            m_nMachLook = MCH_LOOK.TAB_HEAD
-         Case MCH_LOOK.TAB_HEAD
-            m_nMachLook = MCH_LOOK.TAB_TOOL
-         Case Else
-            m_nMachLook = MCH_LOOK.ALL
+            Case MCH_LOOK.ALL
+               m_nMachLook = MCH_LOOK.TAB_HEAD
+            Case MCH_LOOK.TAB_HEAD
+               m_nMachLook = MCH_LOOK.TAB_TOOL
+            Case MCH_LOOK.TAB_TOOL
+               m_nMachLook = MCH_LOOK.TAB
+            Case Else
+               m_nMachLook = MCH_LOOK.ALL
          End Select
          ' aggiorno lo stato della macchina e la sua visualizzazione
          EgtSetMachineLook(m_nMachLook)
@@ -444,8 +454,12 @@ Public Class DirectCutPageUC
             m_ControlsDirectCutUC1.DirectCutPage_Unloaded(Nothing, Nothing)
          Case Controls.MachineButtonUC
             MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC1)
             ControlsMachineBtn.IsChecked = False
          Case Controls.VacuumButtonUC
+            MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
             MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
             VacuumMachineBtn.IsChecked = False
       End Select

DirectCuts/FlatteningCut.xaml.vb

@@ -186,7 +186,10 @@ Public Class FlatteningCut
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If( m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString( m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      ' imposto la Z di sicurezza corretta
+      EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
+      EgtMdbSave()
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare

DirectCuts/MachineButtonsUC.xaml.vb

@@ -7,6 +7,8 @@ Public Class MachineButtonsUC
    Private m_DirectCutPage As DirectCutPageUC
    Friend m_CN As CN_generico
 
+   Public nCountButton As Integer = 11
+
    Private m_bOnlyLaser As Boolean = False
    Private m_bFirst As Boolean = True
 
@@ -33,6 +35,7 @@ Public Class MachineButtonsUC
    Private Const BTN_STATE_DOOR_OPENED As String = "DoorOpened"
    Private Const BTN_STATE_DOOR_CLOSED As String = "DoorClosed"
    Private Const BTN_STATE_PARKING As String = "Parking"
+   Private Const BTN_STATE_HOME As String = "Home"
    Private Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
    Private Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
    Private Const BTN_ENABLE_PC As String = "EnablePC"
@@ -76,6 +79,9 @@ Public Class MachineButtonsUC
          GetToggleButton(nIndex + 1).Visibility = Windows.Visibility.Hidden
       Next
 
+      ' notifico nella variabile pubblica il numero di pulsanti inseriti nella barra
+      nCountButton = m_nCount
+
       ' Se variabile di stato "Nothing"/"DoorOpened"/"DoorClosed" imposto immagine fissa
       For nIndex As Integer = 0 To m_nCount - 1
          If StateFlagArray(nIndex) = BTN_STATE_NOTHING OrElse
@@ -267,9 +273,62 @@ Public Class MachineButtonsUC
                   End If
                   Return
                End If
+               ' CONTROLLO FANUC
+            Case 4
+               ' ------------------------------------ FANUC ------------------------------------
+               ' eventuale scrittura di linea di comando MDI
+               If Not String.IsNullOrEmpty(CmdString) Then
+                  ' attivo mpdalità MDI
+                  m_CN.DGeneralFunctions_WriteCncMode(2)
+                  System.Threading.Thread.Sleep(100)
+                  ' salvo la stringa di comando ricevuta dal file lua
+                  m_CN.sz_ManualDataInput = CmdString
+                  ' esguo la funzione che ha il compito di scrivere il comando MDI
+                  m_CN.MDI_command()
+               End If
+               ' attivo modalità AUTO
+               m_CN.DGeneralFunctions_WriteCncMode(7)
+               System.Threading.Thread.Sleep(100)
+               If String.IsNullOrEmpty(EValue) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue As Boolean
+                     If EValue.Trim = "1" Then bEValue = True
+                     m_CN.NC_write_var_bit(ENumber, CBool(EValue))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber, CShort(EValue))
+                  End If
+                  EgtOutLog("Fanuc_DNumber= " & ENumber & " DValue= " & EValue)
+               End If
+               ' eventale caricamento seconda variabile
+               If String.IsNullOrEmpty(EValue2) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber2)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber2)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber2.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue2 As Boolean
+                     If EValue2.Trim = "1" Then bEValue2 = True
+                     m_CN.NC_write_var_bit(ENumber2, CBool(EValue2))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber2, CShort(EValue2))
+                  End If
+                  EgtOutLog("Fanuc_DNumber2= " & ENumber2 & " DValue2= " & EValue2)
+               End If
+               Return
          End Select
       End If
 
+
       Dim nResult As Short
       ' Imposto modalità MDI per controlli num
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
@@ -286,6 +345,8 @@ Public Class MachineButtonsUC
             m_CN.DGeneralFunctions_CycleStart()
          Case 3
             'Per il siemens non devo fare nulla
+         Case 4
+            ' Nicola: 27/03/2023 attivazione della funzione M# indicata?
       End Select
 
       If b2Start Then
@@ -320,6 +381,17 @@ Public Class MachineButtonsUC
          EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)
@@ -640,6 +712,40 @@ Public Class MachineButtonsUC
       End If
    End Sub
 
+   Friend Sub HomeStateChanged(HomeState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_HOME)
+      If nIndex = -1 Then Return
+      If HomeState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
    Friend Sub EnableZoneStateChanged(ZoneState As Integer)
       Dim sFlag As String = String.Empty
       If ZoneState = 1 Then

DirectCuts/ManualAxesMoveUC.xaml.vb

@@ -209,7 +209,7 @@ Public Class ManualAxesMoveUC
       System.Threading.Thread.Sleep(150)
       m_CN.DGeneralFunctions_CycleStart()
       System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
-      m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
+      ' m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
       m_MoveClicked = False
    End Sub
 

DirectCuts/SingleCutUC.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Threading
+Imports EgtUILib
 
 Public Class SingleCutUC
 
@@ -43,6 +44,10 @@ Public Class SingleCutUC
    Private Const MIN_CUT_LEN As Double = 10.0
    Private Const MAX_SIDE_ANG As Double = 60.0
    ' Costanti che indicano la modalità di acquisizione dei punti
+
+   ' Utilizzato per aggiornare la posizione della macchina
+   Private m_RefreshTimer As New DispatcherTimer
+
    Private Enum PT_MODE As Integer
       SAW = 0
       LASER = 1
@@ -68,14 +73,14 @@ Public Class SingleCutUC
       SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
       OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dAngV = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dLen = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_ANGV, m_dAngV, m_MainWindow.GetIniFile())
       m_dOffset = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_OFFSET, m_dOffset, m_MainWindow.GetIniFile())
       m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
-      m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
    End Sub
 
    Private Sub SingleCut_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -92,6 +97,10 @@ Public Class SingleCutUC
          m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
          EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
          EgtDraw()
+         ' riavvio il timer per visualizzare la poszione della macchina
+         If Not IsNothing(m_RefreshTimer) Then
+            m_RefreshTimer.Start()
+         End If
          Return
       End If
       ' Disabilito registrazione progetto modificato
@@ -114,7 +123,7 @@ Public Class SingleCutUC
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -138,21 +147,40 @@ Public Class SingleCutUC
       ' Deseleziono bottone primo punto
       Point1Btn.IsChecked = False
 
-      ' la visualizzazione dei comandi è gestira dalla DirectCutPageUC richiamando la funzione ReloadParam
+      ' la visualizzazione dei comandi è gestita dalla DirectCutPageUC richiamando la funzione ReloadParam
+
+      ' forzo la macchina ad essere visibile fin da subito
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
+      m_MainWindow.m_DirectCutPageUC.m_nMachLook = MCH_LOOK.TAB
+      ' Creo il timer il timer per aggiornare il posizionamento della macchina
+      AddHandler m_RefreshTimer.Tick, AddressOf RefreshTimer_tick
+      m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(1000)
 
       ' Aggiorno visualizzazione
       EgtDraw()
+
+      ' Avvi il timer
+      m_RefreshTimer.Start()
+   End Sub
+
+   Private Sub RefreshTimer_tick()
+      ' se è impostata la visualizzazione della sola tavola allora non aggiorno il disegno
+      If m_MainWindow.m_DirectCutPageUC.m_nMachLook = MCH_LOOK.TAB Then Return
+      ' Aggiorno visualizzazione
+      SetMachineInCurrPos()
+      ' Aggiorno il disegno
+      EgtDraw()
    End Sub
 
    Friend Sub SingleCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_LENGTH, DoubleToString( m_dLen, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_ANGV, DoubleToString( m_dAngV, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_LENGTH, DoubleToString(m_dLen, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_ANGV, DoubleToString(m_dAngV, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_OFFSET, DoubleToString(m_dOffset, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_SAWTH, If(m_bSawTh, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
       ' Se non vado in simulazione
       If Not m_bSimul Then
@@ -171,6 +199,8 @@ Public Class SingleCutUC
          EgtSetMachineLook(MCH_LOOK.TAB)
          EgtDraw()
       End If
+      ' interrompo il Timer per aggiornare la visualizzazione del posizionamento macchina 
+      m_RefreshTimer.Stop()
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
@@ -279,7 +309,7 @@ Public Class SingleCutUC
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP1
          m_ptTipP1 = m_ptPrev
@@ -298,6 +328,7 @@ Public Class SingleCutUC
       m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
       EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
       EgtDraw()
+
       ' Seleziono il bottone per indicare che il primo punto è stato acquisito
       Point1Btn.IsChecked = True
       ' Abilito e deseleziono secondo punto
@@ -358,7 +389,7 @@ Public Class SingleCutUC
          m_dAngV = 90 - dTAngV
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
@@ -476,7 +507,7 @@ Public Class SingleCutUC
       EgtDraw()
    End Sub
 
-   Private Sub SawThick_Click( sender As Object, e As RoutedEventArgs) Handles SawThChBx.Click
+   Private Sub SawThick_Click(sender As Object, e As RoutedEventArgs) Handles SawThChBx.Click
       ' Recupero lo stato di check
       m_bSawTh = SawThChBx.IsChecked()
       ' Disegno il taglio
@@ -536,9 +567,9 @@ Public Class SingleCutUC
       m_CurrProjPage.SetWarningMessage( "Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -583,7 +614,7 @@ Public Class SingleCutUC
       Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       EgtTdbSetCurrTool(sSaw)
       Dim dThick As Double = 0
-      ' se è impostata una lavorazione di lama
+      ' Se è impostata una lavorazione di lama
       If Not String.IsNullOrEmpty(sSawing) Then
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       End If
@@ -599,14 +630,19 @@ Public Class SingleCutUC
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
-      If Math.Abs(m_dOffset) > 10 * EPS_SMALL Then
-         Dim dTotOffset = m_dOffset
-         If m_bSawTh Then dTotOffset += If( m_dOffset > 0, dThick, -dThick)
+      ' Applico la correzione di spessore lama -> anche se Offset=0! ver_2.5b1
+      Dim dTotOffset = m_dOffset
+      If m_bSawTh Then
+         dTotOffset += If(m_dOffset > 0, dThick, -dThick)
+         EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
+      Else
          EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
       End If
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, m_dAngV)
+      ' Imposto se disabilitare l'inversine di direzione del taglio
+      If Not m_MainWindow.m_CurrentMachine.bEnableInvert Then EgtSetInfo(nCutId, INFO_ENABLE_INVERT, 0)
       ' Creo layer per crocetta di riferimento
       Dim nCrossLayerId = EgtCreateGroup(nPartId)
       ' Aggiungo crocetta/e

DrawImport/CompoDimensionUC.xaml.vb

@@ -37,7 +37,7 @@ Public Class CompoDimensionUC
       InternComponentBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 47)     ' Componenti interni
       If Not String.IsNullOrEmpty(sCompoDir) Then
          bEnableAlzFront = True
-         AlzFrontBtn.Content = "Alzatine & Frontalini"
+         AlzFrontBtn.Content = EgtMsg(91137)
       Else
          AlzFrontBtn.Visibility = Visibility.Collapsed
       End If
@@ -107,8 +107,10 @@ Public Class CompoDimensionUC
    Friend Sub ShowAlzFrontBtn(ByVal value As Boolean)
       If value Then
          AlzFrontBtn.Visibility = Visibility.Visible
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Hidden
       Else
          AlzFrontBtn.Visibility = Visibility.Hidden
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Visible
       End If
    End Sub
 

DrawImport/DrawPageUC.xaml.vb

@@ -283,6 +283,19 @@ Public Class DrawPageUC
       m_sCsvOrder = ""
       m_sCsvList = ""
       m_sCsvName = ""
+
+      ' Visuliazzazione dei bottoni per modifica dei componenti
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         SideAngleBtn.Visibility = Visibility.Hidden
+         FiloTopBtn.Visibility = Visibility.Hidden
+         EngraveBtn.Visibility = Visibility.Hidden
+         DripCutBtn.Visibility = Visibility.Hidden
+      Else
+         SideAngleBtn.Visibility = Visibility.Visible
+         FiloTopBtn.Visibility = Visibility.Visible
+         EngraveBtn.Visibility = Visibility.Visible
+         DripCutBtn.Visibility = Visibility.Visible
+      End If
    End Sub
 
    ' recupero il click sulla scena ed assegno il metodo a secondo della pagina aperta
@@ -553,6 +566,7 @@ Public Class DrawPageUC
       OkBtn.IsEnabled = True
    End Sub
 
+   ' Navigazione nelle due pagine per la selezione dei componenti da disegnare
    Friend Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       DrawPage_Unloaded(sender, e)
@@ -1124,6 +1138,33 @@ Public Class DrawPageUC
       Return True
    End Function
 
+   Private Function MakeSectionFrameInsert(ByVal nNbr As Integer) As Boolean
+      ' m_MainWindow.m_ImportPageUC.LoadFrame()
+      ' recupero il primo layer del primo pezzo
+      Dim nLayerId As Integer = EgtGetFirstLayer(EgtGetFirstPart())
+      If nLayerId = GDB_ID.NULL Then Return False
+      ' percorso in cui salvare tempora
+      Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\Frame.Nge"
+      If Not EgtSaveObjToFile(nLayerId, sTmpFile, NGE.BIN) Then Return False
+      ' Passo al contesto principale
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' Inserisco il pezzo
+      If Not My.Computer.FileSystem.FileExists(sTmpFile) Then Return False
+      ' eseguo inserimento
+      For i As Integer = 1 To nNbr
+         EgtInsertFile(sTmpFile)
+         ' Ne recupero l'Id
+         Dim nPartId As Integer = EgtGetLastPart()
+         ' Creo la cornice
+         m_MainWindow.m_FrameCutPageUC.CreateFrame(nPartId)
+         ' Ricalcolo lavorazioni
+         AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
+      Next
+      ' Cancello il file
+      My.Computer.FileSystem.DeleteFile(sTmpFile)
+      Return True
+   End Function
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_bBackFromInternalCompo = False
       m_bInternalCompo = False
@@ -1139,7 +1180,12 @@ Public Class DrawPageUC
       Dim InsNbr As Integer = Int32.Parse(PartNumTxBx.Text)
       ' Passo al contesto principale
       'MakeInsert(InsNbr, sPartName)
-      MakeMultipleInsert(InsNbr, sPartName)
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         MakeSectionFrameInsert(InsNbr)
+      Else
+         MakeMultipleInsert(InsNbr, sPartName)
+      End If
+
       ' Aggiorno ambiente principale
       EgtZoom(ZM.ALL)
       ' Elimino nome del componente precedente
@@ -1153,7 +1199,7 @@ Public Class DrawPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
 
    End Sub
 
@@ -1174,7 +1220,7 @@ Public Class DrawPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
    End Sub
 
    Private Sub TrfDataBtn_Click(sender As Object, e As RoutedEventArgs) Handles TrfDataBtn.Click

DrawImport/FiloTopUC.xaml.vb

@@ -39,7 +39,8 @@ Public Class FiloTopUC
 
       ' Imposto messaggi
       ParameterTxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 10)       ' Offset
-      Parameter2TxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter2TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter3TxBl.Text = EgtMsg(91138)
 
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Imposto questa come pagina correntemente visualizzata nella drawpage

DrawImport/ImportPageUC.xaml

@@ -58,7 +58,7 @@
             <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
                      ItemsSource="{Binding ItemList}"/>
 
-                <Grid Grid.Row="3" Margin="0,0,8,0">
+                <Grid Name="FinderGrd"  Grid.Row="3" Margin="0,0,8,0">
                     <Grid.ColumnDefinitions>
                         <ColumnDefinition Width="4*"/>
                         <ColumnDefinition Width="1*"/>

DrawImport/ImportPageUC.xaml.vb

@@ -19,6 +19,9 @@ Public Class ImportPageUC
    Friend WithEvents ImportScene As New Scene
    Private ImportSceneHost As New System.Windows.Forms.Integration.WindowsFormsHost
 
+   Private m_SelListHole As New List(Of Integer)
+   Private m_DeselectListHole As New List(Of Integer)
+
    ' Properties
    Private m_sCurrDir As String = String.Empty
    Private m_sCurrFile As String = String.Empty
@@ -101,6 +104,8 @@ Public Class ImportPageUC
       ' abilitazione Ordine e Distinta per importazione DXF
       m_bEnableOrderList = (m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut And
                             GetPrivateProfileInt(S_COMPO, K_CSVDATA, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' rendo visibilie il pulsante di ricerca file
+      FinderGrd.Visibility = Visibility.Visible
 
       If m_bFirst Then
          ' imposto colore di default
@@ -196,7 +201,6 @@ Public Class ImportPageUC
       PartNumTxBx.Text = "1"
       ' disabilito ok
       OkBtn.IsEnabled = False
-
    End Sub
 
    Private Sub LoadGridData()
@@ -345,7 +349,7 @@ Public Class ImportPageUC
    End Function
 
    Private Function LoadCurrFile() As Boolean
-      ' Pulisco il DB geometrico locale
+      ' Pulisco il DB geometrico locale      
       Dim bOk As Boolean = EgtNewFile()
       ' Costruisco path completa del file
       Dim sPath = IO.Path.Combine(m_sCurrDir, m_sCurrFile)
@@ -415,7 +419,7 @@ Public Class ImportPageUC
             DripCutBtn.IsEnabled = False
             DripDrillBtn.IsEnabled = False
          End If
-      ' altrimenti import per cornici
+         ' altrimenti import per cornici
       Else
          mmBtn.IsEnabled = (m_nFileType = FT.DXF)
          inchBtn.IsEnabled = (m_nFileType = FT.DXF)
@@ -569,6 +573,8 @@ Public Class ImportPageUC
                         EgtSetColor(nEntId, New Color3d(127, 63, 0))
                         nEntId = EgtGetNext( nEntId)
                      End While
+                     m_DeselectListHole.Add(nLayId)
+                     m_SelListHole.Remove(nLayId)
                   End If
                Else
                   Dim nLayId As Integer = GDB_ID.NULL
@@ -585,6 +591,8 @@ Public Class ImportPageUC
                         EgtSetColor(nEntId, New Color3d(255, 255, 255))
                         nEntId = EgtGetNext( nEntId)
                      End While
+                     m_SelListHole.Add(nLayId)
+                     m_DeselectListHole.Remove(nLayId)
                   End If
                End If
                EgtDraw()
@@ -592,6 +600,12 @@ Public Class ImportPageUC
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      m_FiloTopUC.CreateFiloTopPreView(m_SelListHole)
+      m_FiloTopUC.EraseFiloTopPreview(m_DeselectListHole)
+      If m_SelListHole.Count > 0 Then
+         MessageTxBx.Text = ""
+         MessageBrd.Background = Brushes.Transparent
+      End If
    End Sub
 
    Private Sub OnShowDistanceVector(sender As Object, vtDist As Vector3d) Handles ImportScene.OnShowDistanceVector
@@ -1040,6 +1054,7 @@ Public Class ImportPageUC
 
    Private Sub SideAngleBtn_Click(sender As Object, e As RoutedEventArgs) Handles SideAngleBtn.Click
       If SideAngleBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni per percorsi interni
          AdjustSelectRegions()
          ' Dichiaro nessuna selezione
@@ -1062,6 +1077,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1092,6 +1108,7 @@ Public Class ImportPageUC
 
    Private Sub DripCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles DripCutBtn.Click
       If DripCutBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Dichiaro nessuna selezione
          m_nSelectedPart = GDB_ID.NULL
          m_nSelectedLayer = GDB_ID.NULL
@@ -1112,6 +1129,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_SideAngleUC)
@@ -1142,6 +1160,7 @@ Public Class ImportPageUC
 
    Private Sub DripDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles DripDrillBtn.Click
       If DripDrillBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni di selezione per percorsi interni
          AdjustSelectRegions()
          ' Imposto modalità fori da sotto
@@ -1160,6 +1179,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 15)   ' Selezionare uno o più fori
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1187,6 +1207,7 @@ Public Class ImportPageUC
 
    Private Sub FiloTopBtn_Click(sender As Object, e As RoutedEventArgs) Handles FiloTopBtn.Click
       If FiloTopBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni per percorsi interni
          AdjustSelectRegions()
          ' Dichiaro nessuna selezione
@@ -1208,6 +1229,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno interno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible

DrawImport/MainComponentPageUC.xaml.vb

@@ -41,6 +41,7 @@ Public Class MainComponentPageUC
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.m_bBackFromInternalCompo = False
    End Sub
 
    Private Function GetButton(ByVal nInd As Integer) As Button
@@ -167,7 +168,7 @@ Public Class MainComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = DirectCast(e.Source, Button)
-      Dim CompoName As String = S_COMPO & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = If(m_MainWindow.FrameCutBtn.IsChecked, S_FRAMECOMPO, S_COMPO) & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       m_SecondaryComponentPage.m_sCurrCompo = String.Empty
       Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
@@ -251,13 +252,18 @@ Public Class MainComponentPageUC
    End Sub
 
    Private Sub LoadPage()
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         LoadFramePage()
+         Return
+      End If
+
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
       Dim nCompoNumber As Integer = GetPrivateProfileInt(S_COMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)
-      nDeltaSecondPage = 0
+         nDeltaSecondPage = 0
       Else
          ClearButton(nCompoNumber)
          nDeltaSecondPage = 8
@@ -325,16 +331,86 @@ Public Class MainComponentPageUC
 
    End Sub
 
+   Private Sub LoadFramePage()
+      Dim nDeltaSecondPage As Integer = 8
+      ' Leggo numero di componenti presenti
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
+      ' Calcolo indici a seconda della pagina in cui sono
+      If m_bIsFirstPage Then
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 0
+      Else
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 8
+      End If
+
+      ' Creazione converter da String a ImageSource
+      Dim ImageConverter As New ImageSourceConverter
+      Dim ThicknessConverter As New ThicknessConverter
+
+      'Assegnazione immagine e testo ai Button
+      For index As Integer = 1 To 8
+         Dim CustomThickness As New Thickness(0)
+         Dim nCompoName As Integer = GetPrivateProfileInt(S_FRAMECOMPO & index + nDeltaSecondPage, "Name", 0, m_MainWindow.GetIniFile())
+         Dim sCompoImage As String = ""
+         Dim sCompoImageSource As ImageSource
+
+         'verifico presenza immagine e la aggiungo
+         If GetPrivateProfileString(S_FRAMECOMPO & index + nDeltaSecondPage, "Image", "", sCompoImage, m_MainWindow.GetIniFile()) <> 0 Then
+            Try
+               sCompoImageSource = ImageConverter.ConvertFromString(m_MainWindow.GetResourcesDir() & "\" & sCompoImage)
+               GetImage(index).Height = 65
+               GetImage(index).Width = 65
+               GetImage(index).Source = sCompoImageSource
+            Catch ex As Exception
+               EgtOutLog("Error loading image " & sCompoImage)
+               sCompoImage = String.Empty
+               GetImage(index).Height = 0
+               GetImage(index).Width = 0
+               CustomThickness.Right = 0
+               GetImage(index).Margin = CustomThickness
+            End Try
+         Else
+            'Se non c'è l'immagine azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+         'verifico presenza testo
+         If nCompoName > 0 Then
+            Dim sCompoName As String = EgtMsg(MSG_COMPONENTPAGEUC + nCompoName)
+            'verifico presenza immagine
+            If sCompoImage.Length > 0 Then
+               'se la lunghezza del testo è maggiore di 15 lo taglio
+               If sCompoName.Length > 15 Then
+                  sCompoName = sCompoName.Substring(0, 15)
+               End If
+               GetLabel(index).Text = sCompoName
+               'Se ci sono sia testo che immagine imposto un margine di 10
+               CustomThickness.Right = 10
+               GetImage(index).Margin = CustomThickness
+            Else
+               'se l'immagine non c'è e il testo è maggiore di 20 lo taglio
+               If sCompoName.Length > 20 Then
+                  sCompoName = sCompoName.Substring(0, 20)
+               End If
+               GetLabel(index).Text = sCompoName
+            End If
+         Else
+            'Se non c'è testo azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+      Next
+
+   End Sub
+
    ' Gestione bottone altri componenti
    Private Sub Compo9_Click(sender As Object, e As RoutedEventArgs) Handles Compo9.Click
       If m_bIsFirstPage Then
          m_bIsFirstPage = False
          LoadPage()
-         'Compo9.SetValue(Grid.ColumnProperty, 1)
-         'Compo9.SetValue(Grid.ColumnSpanProperty, 1)
-         'ImageCompo9.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NumericKeyboardArrow.png", UriKind.Relative))
-         'ImageCompo9.Visibility = Windows.Visibility.Visible
-         'LabelCompo9.Visibility = Windows.Visibility.Hidden
          Compo9.SetValue(Grid.ColumnProperty, 0)
          Compo9.SetValue(Grid.ColumnSpanProperty, 2)
          ImageCompo9.Visibility = Windows.Visibility.Hidden

Frames/FrameCutPageUC.xaml

@@ -7,124 +7,146 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
 
-   <!-- Definizione della FrameCutPage -->
-   <Grid Name="FrameCutPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
-      
-      <!-- Definizione della Grid superiore -->
-      <Grid Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
-         </Grid.ColumnDefinitions>
-         
-         <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
-            <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </ToggleButton>
-
-      </Grid>
-
-      <Grid Name="LeftGrid" Grid.Row="1">
-         <Grid.RowDefinitions>
+    <!-- Definizione della FrameCutPage -->
+    <Grid Name="FrameCutPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
             <RowDefinition Height="1*"/>
-            <RowDefinition Height="7*"/>
-         </Grid.RowDefinitions>
-      
-      <Grid Grid.Row="1">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="0.6*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="2.5*"/>
-         </Grid.RowDefinitions>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
-               Width="200" MaxDropDownHeight="300">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+        <!-- Definizione della Grid superiore -->
+        <Grid Grid.Column="1" Grid.Row="0" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+            </Grid.ColumnDefinitions>
 
-         <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="SelSectionBtn" 
-                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+            <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="CompoBtn" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="SelSectionBtn" Grid.Column="3" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                 <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
-             
-            <Grid>
-               <Button Name="SelGuideBtn" 
-                       Style="{DynamicResource OmagCut_YellowTextButton}"/>
-               <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-                  <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
-                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-                  <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
-                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               </UniformGrid>
-            </Grid>  
-         </UniformGrid>
 
-         <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+            <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
+                <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
+        </Grid>
+
+        <Grid Name="LeftGrid" Grid.Row="1">
+            <Grid.RowDefinitions>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="7*"/>
+            </Grid.RowDefinitions>
+
+            <Grid Grid.Row="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.6*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="1.7*"/>
+                </Grid.RowDefinitions>
+
+                <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
+               Width="200" MaxDropDownHeight="300">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                    <!--<Button Name="SelSectionBtn" 
+                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                        <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>-->
+
+                    <Grid>
+                        <Button Name="SelGuideBtn" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                        <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                            <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                            <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                            <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                        </UniformGrid>
+                    </Grid>
+                </UniformGrid>
+
+                <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
-            Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
-            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
+               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
+               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="MirrorPartBtn" 
+                <TextBlock Name="OffsXInteryTxBl"  Grid.Row="5" Grid.ColumnSpan="2"
+               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsXInteryTxBx" Grid.Column="2" Grid.Row="5" Width="50"
+               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+                <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="MirrorPartBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource SpecchiaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-            </Button>
-            <Button Name="RemovePartBtn" 
+                    </Button>
+                    <Button Name="RemovePartBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource Rimuovi_eliminaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </UniformGrid>
+                    </Button>
+                </UniformGrid>
 
-         <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
+                <!--<UniformGrid Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="CompoBtn" 
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                        <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                </UniformGrid>-->
+
+                <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
             Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
 
          <ComboBox Name="SawRoughingCmBx" Grid.Row="5" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}"
@@ -182,10 +204,10 @@
             </ComboBox.ItemTemplate>
          </ComboBox>-->
 
-      </Grid>
-         
-      </Grid>
+            </Grid>
 
-   </Grid>
+        </Grid>
+
+    </Grid>
 
 </UserControl>

Frames/FrameCutPageUC.xaml.vb

@@ -52,6 +52,8 @@ Public Class FrameCutPageUC
       OffsXyTxBx.Text = LenToString(dOffsXY, 3)
       Dim dOffsYY As Double = GetPrivateProfileDouble(S_FRAME, K_OFFSYY, 5, m_MainWindow.GetIniFile())
       OffsYyTxBx.Text = LenToString(dOffsYY, 3)
+      Dim dOffsXInterY As Double = GetPrivateProfileDouble(S_FRAME, K_OFFSXINTERY, 5, m_MainWindow.GetIniFile())
+      OffsXInteryTxBx.Text = LenToString(dOffsXInterY, 3)
 
       ' Imposto i messaggi letti dal file dei messaggi
       m_AlongAx.Add(EgtMsg(MSG_FRAMECUTPAGEUC + 1))            'Lungo X
@@ -70,6 +72,7 @@ Public Class FrameCutPageUC
       OffsZTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 8)           'Distanza sopra
       OffsXyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 9)          'Distanza inizio
       OffsYyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 22)         'Distanza Y
+      OffsXInteryTxBl.Text = EgtMsg(90645)                      'Interasse
    End Sub
 
    Private Sub FrameCutPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -81,6 +84,12 @@ Public Class FrameCutPageUC
       m_ProjectMgr.CSVBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.VeinMatchingBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.RegisterBtn.Visibility = Windows.Visibility.Hidden
+      ' Visualizzo il bottone per l'importazione dei compo frame
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.COMPOFRAME) AndAlso GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile()) > 0 Then
+         CompoBtn.Visibility = Visibility.Visible
+      Else
+         CompoBtn.Visibility = Visibility.Hidden
+      End If
       ' Recupero dimensioni e kerf del grezzo
       m_nRawId = EgtGetFirstRawPart()
       GetRawBox(m_RawBox)
@@ -271,7 +280,7 @@ Public Class FrameCutPageUC
       End If
    End Sub
 
-   Private Sub OffsXXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsZTxBx.EgtClosed, OffsXyTxBx.EgtClosed, OffsYyTxBx.EgtClosed
+   Private Sub OffsXXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsZTxBx.EgtClosed, OffsXyTxBx.EgtClosed, OffsYyTxBx.EgtClosed, OffsXInteryTxBx.EgtClosed
       ' Forzo aggiornamento grezzo nella pagina di Nesting
       m_MainWindow.m_CadCutPageUC.m_NestPage.CalcRawPart()
       ' Parcheggio pezzi presenti nel grezzo
@@ -296,9 +305,13 @@ Public Class FrameCutPageUC
          WritePrivateProfileString(S_FRAME, K_OFFSXY, DoubleToString(dOffsXy, 3), m_MainWindow.GetIniFile())
       End If
       Dim dOffsYy As Double = 0
-      If StringToLen(OffsYyTxBx.Text, dOffsYY) Then
+      If StringToLen(OffsYyTxBx.Text, dOffsYy) Then
          WritePrivateProfileString(S_FRAME, K_OFFSYY, DoubleToString(dOffsYy, 3), m_MainWindow.GetIniFile())
       End If
+      Dim dOffsXIntery As Double = 0
+      If StringToLen(OffsXInteryTxBx.Text, dOffsXIntery) Then
+         WritePrivateProfileString(S_FRAME, K_OFFSXINTERY, DoubleToString(dOffsXIntery, 3), m_MainWindow.GetIniFile())
+      End If
    End Sub
 
    Private Sub MirrorPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles MirrorPartBtn.Click
@@ -436,6 +449,16 @@ Public Class FrameCutPageUC
       End If
    End Sub
 
+   Private Sub CompoBtn_Click(sender As Object, e As RoutedEventArgs) Handles CompoBtn.Click
+      m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
+      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
+      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
+   End Sub
+
    Friend Function CreateFrame(nPartId As Integer) As Boolean
       If Not MyCreateFrame( nPartId) Then
          EgtErase( nPartId)
@@ -936,12 +959,18 @@ Public Class FrameCutPageUC
       ' Determino distanza da spessore lama
       Dim dMinDist As Double = 0
       Dim dSawThick As Double = 0
+      Dim dOffsXIntery As Double = 0
+      StringToLen(OffsXInteryTxBx.Text, dOffsXIntery)
       If EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw) AndAlso
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dSawThick) Then
-         dMinDist = dSawThick + 5 * EPS_SMALL
+         If dOffsXIntery <= dSawThick Then
+            dMinDist = dSawThick + 5 * EPS_SMALL
+         Else
+            dMinDist = dOffsXIntery + 5 * EPS_SMALL
+         End If
       Else
          EgtOutLog("Not found current saw for frames mindist")
-         dMinDist = 0
+         dMinDist = dOffsXIntery
       End If
       ' Inserisco il pezzo nel grezzo
       Dim ptIns As Point3d

Machine/AlarmsPageUC.xaml

@@ -184,6 +184,31 @@
 
                </GroupBox>
 
+               <!--Parametri rettifica tagli sottosquadra: 1 Parametro -->
+               <GroupBox Name="RectificationWJParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="2" >
+                   <Grid Grid.Column="3" Grid.Row="2">
+                       <Grid.ColumnDefinitions>
+                           <ColumnDefinition Width="2*"/>
+                           <ColumnDefinition Width="2*"/>
+                       </Grid.ColumnDefinitions>
+                       <Grid.RowDefinitions>
+                           <RowDefinition Height="*"/>
+                       </Grid.RowDefinitions>
+
+                       <TextBlock Name="EnableRectificationTxBl" Grid.Row="0" Grid.ColumnSpan="2"
+                                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                       <CheckBox Name="EnableRectificationChBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                                 HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+                       <!--<TextBlock Name="OffsetRectificationTxBl" Grid.Row="1" Grid.Column="0" 
+                                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                       <EgtWPFLib:EgtTextBox Name="OffsetRectificationTxBx" Grid.Row="1" Grid.Column="1" Margin="10,0,10,0"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>-->
+
+                   </Grid>
+
+               </GroupBox>
+
                <!--Parametri WaterJet: 5 Parametro (se questo GroupBox attivo allora nascondo Fori/Fresatura)-->
                <GroupBox Name="WjsParamGpBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="4" 
                               Style="{DynamicResource OmagCut_GroupBox}">

Machine/AlarmsPageUC.xaml.vb

@@ -97,7 +97,10 @@ Public Class AlarmsPageUC
       HolesOffsetWJTxBl.Text = "Offset"
       MinRadiusWJTxBl.Text = "Min Radius"
       OneHoleInCornerWJTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 26)
-      '--  FINE  -- nuovi parametri per preforo lavello
+      '-- INIZIO -- nuovi parametro Rettifica tagli sottosquadra WJ
+      REctificationWJParamGpBx.Header = "Rectification"
+      EnableRectificationTxBl.Text = "Enable (on subsquare angle)"
+      '--  FINE  -- nuovi parametro Rettifica tagli sottosquadra WJ
       NestingParamGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 31)            ' Nesting
       AlignTxBl.Text = EgtMsg(90932)                                     ' Allineato
       GhigliottinaTxBl.Text = EgtMsg(91066)                              ' Ghigliottina
@@ -175,6 +178,7 @@ Public Class AlarmsPageUC
          ' Se non previsti tagli waterjet, disabilito relativo box
          If Not m_CurrentMachine.bWaterJetting Then
             WjsParamGpBx.Visibility = Visibility.Hidden
+            RectificationWJParamGpBx.Visibility = Visibility.Hidden
          End If
 
          ' Abilitazione box per contorni grezzo da foto
@@ -354,7 +358,9 @@ Public Class AlarmsPageUC
       MinRadiusWJTxBx.Text = LenToString(dVal, 2)
       OneHoleInCornerWJChBx.IsChecked =
          (GetPrivateProfileInt(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
-
+      ' leggo se attiva la rettifica degli angoli per WaterJet
+      EnableRectificationChBx.IsChecked =
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, 0, m_MainWindow.GetMachIniFile()) <> 0)
       ' Leggo accorciamento angoli con fresa
       dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
       ShortTxBx.Text = LenToString(dVal, 2)
@@ -970,9 +976,18 @@ Public Class AlarmsPageUC
          WritePrivateProfileString(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, "0", m_MainWindow.GetMachIniFile())
       End If
    End Sub
-
    ' --   FINE   -- nuovi parametri per prefori WaterJet
 
+   ' -- INIZIO -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+   Private Sub EnableRectificationChBx_Click(sender As Object, e As EventArgs) Handles EnableRectificationChBx.Click
+      If EnableRectificationChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "1", m_MainWindow.GetMachIniFile)
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "0", m_MainWindow.GetMachIniFile)
+      End If
+   End Sub
+   ' --   FINE   -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+
    Private Sub TmEnableChBx_Click(sender As Object, e As RoutedEventArgs) Handles TmEnableChBx.Click
       If TmEnableChBx.IsChecked() Then
          WritePrivateProfileString(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, "1", m_MainWindow.GetMachIniFile())
@@ -1163,6 +1178,10 @@ Public Class AlarmsPageUC
          Case 3
             Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(0)
             EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+         Case 4
+            ' FANUC - Manual:7, Edit:1
+            Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(7)
+            EgtOutLog("Impostata modalità manuale: esito " & nResult.ToString)
       End Select
       ' Recupero file LUA
       EgtLuaExecFile(m_CurrentMachine.sMachDir() & "\DirectCmd\SawProbing.lua")
@@ -1185,6 +1204,12 @@ Public Class AlarmsPageUC
       EgtLuaSetGlobNumVar("CMD.THICK", dToolThick * 1000)
       EgtTdbGetCurrToolParam(MCH_TP.LEN, dToolLen)
       EgtLuaSetGlobNumVar("CMD.LENGTH", dToolLen * 1000)
+      ' Nuova varibile per gestione tastatura utensili Frankfurt (Polishing)
+      Dim nType As Integer
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      If m_CurrentMachine.bPolishingWheel AndAlso nType = MCH_TY.MILL_POLISHING Then
+         EgtLuaSetGlobStringVar("CMD.POLISHING", "1")
+      End If
       EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
       EgtLuaCallFunction("CMD.CmdString")
       ' Leggo variabili
@@ -1228,6 +1253,11 @@ Public Class AlarmsPageUC
          Return
       End If
       m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      ' Se fanuc passo in modalità AUTO e attivo
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(0)
+         EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+      End If
       ' Aspetto e lo avvio
       System.Threading.Thread.Sleep(300)
       m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
@@ -1277,6 +1307,10 @@ Public Class AlarmsPageUC
          Dim bRead As Boolean = False
          Dim SawDiameterNameVar As String = String.Empty
          GetPrivateProfileString(S_MACH_PROBING, K_SAWDIAMETER, "", SawDiameterNameVar, m_MainWindow.GetMachIniFile())
+         ' Se utensile non lama, allora la variabile in cui leggo il dato potrebbe essere differente
+         If Not ToolForProbing.m_IsSaw Then
+            GetPrivateProfileString(S_MACH_PROBING, K_TOOLLENGTH, SawDiameterNameVar, SawDiameterNameVar, m_MainWindow.GetMachIniFile())
+         End If
          m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
          For I As Integer = 0 To 20
             ' Devo rileggere la variabile ad ogni ciclo
@@ -1285,7 +1319,10 @@ Public Class AlarmsPageUC
             If m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
                bRead = True
                Dim dVal As Double = m_MainWindow.m_CNCommunication.m_CN.d_DReadELS_value
-               dVal = dVal / 1000
+               ' Se fanuc il dato è in mm (NON MICRON)
+               If m_MainWindow.m_CNCommunication.m_nNCType <> 4 Then
+                  dVal = dVal / 1000
+               End If
                MsgBoxStateInfo.LoadingPrBr_Value = 100
                ' Tastatura conclusa con successo
                Dim sOut As String = EgtMsg(MSG_DIRECTCUTPAGEUC + 43) & " : " & DoubleToString(dVal, 1)

Machine/CurrentMachine.vb

@@ -1,6 +1,7 @@
 Imports System.Collections.ObjectModel
 Imports EgtWPFLib5
 Imports EgtUILib
+Imports System.IO
 
 Public Class CurrentMachine
 
@@ -51,6 +52,8 @@ Public Class CurrentMachine
    Private m_sProdLiProbingState2Var As String = ""
    Private m_sProdLiProbingTcPos2Var As String = ""
    Private m_sProdLiSawDiameter2Var As String = ""
+   Private m_sClickState As String = "E80028"
+   Private m_sClickDir As String = ""
 
    ' Numero e tipo di utensili correntemente disponibili sulla macchina
    Private m_MountedToolConfig As MountedToolConfigs = MountedToolConfigs.SAW
@@ -77,6 +80,9 @@ Public Class CurrentMachine
    Private m_bPolishingWheel As Boolean = False
    Private m_bWaterJet As Boolean = False
 
+   ' Flag che indica se gesire l'inversione del taglio nei tagli singoli
+   Private m_bEnableInvetrt As Boolean = True
+
    ' Abilitazione DB WaterJet
    Private m_bFromDBWaterJet As Boolean = False
 
@@ -313,7 +319,7 @@ Public Class CurrentMachine
          Return m_bAskNewOnResend
       End Get
    End Property
-   
+
 
    Friend ReadOnly Property nProdLiSawProbe As Integer
       Get
@@ -321,6 +327,18 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property sClickState As String
+      Get
+         Return m_sClickState
+      End Get
+   End Property
+
+   Friend ReadOnly Property sClickDir As String
+      Get
+         Return m_sClickDir
+      End Get
+   End Property
+
    Friend Function sProdLiProbingStateVar(nI As Integer) As String
       If nI = 1 Then Return m_sProdLiProbingStateVar
       If nI = 2 Then Return m_sProdLiProbingState2Var
@@ -752,6 +770,12 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property bEnableInvert As Boolean
+      Get
+         Return m_bEnableInvetrt
+      End Get
+   End Property
+
    Friend Property dAdditionalTable As Double
       Get
          Select Case GetCurrentTable()
@@ -779,7 +803,7 @@ Public Class CurrentMachine
                      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, value)
                   End If
                End If
-                  Case 2
+            Case 2
                If Math.Abs(value - m_dTab2AdditionalTable) > EPS_SMALL And
                WritePrivateProfileString(S_TABLE, K_TAB2_ADDITIONALTABLE, DoubleToString(value, 3), sMachIniFile) Then
                   ' Aggiorno il valore corrente
@@ -1144,6 +1168,13 @@ Public Class CurrentMachine
       GetPrivateProfileString(S_PRODUCTIONLINE, K_PRODLIPROBINGTCPOS2VAR, "0", m_sProdLiProbingTcPos2Var, sMachIniFile)
       GetPrivateProfileString(S_PRODUCTIONLINE, K_PRODLISAWDIAMETER2VAR, "", m_sProdLiSawDiameter2Var, sMachIniFile)
 
+      GetPrivateProfileString(S_POLISHLINE, K_CLICKSTATE, "", m_sClickState, sMachIniFile)
+      GetPrivateProfileString(S_POLISHLINE, k_CLICKDIR, "", m_sClickDir, sMachIniFile)
+      If Not Directory.Exists(m_sClickDir) Then
+         m_sClickState = ""
+         EgtOutLog("Directory " & m_sClickDir & " does not exist")
+      End If
+
       ' Leggo configurazione degli utensili in macchina
       m_MountedToolConfig = GetPrivateProfileInt(S_TOOLS, K_MOUNTEDTOOLCONFIG, 0, sMachIniFile)
       ' Leggo flag presenza tipologie utensili
@@ -1200,6 +1231,8 @@ Public Class CurrentMachine
                         m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.ENABLE_WJ)
       ' possibilità di definire attacco speciale per materiali ceramici
       m_bSawingSpecialLeadIn = (GetPrivateProfileInt(S_MACHININGS, K_SAWINGSPECIALLEADIN, 0, sMachIniFile) > 0)
+      ' mantengo la direzione del taglio definita nel taglio diretto
+      m_bEnableInvetrt = (GetPrivateProfileInt(S_DIRECTCUTS, K_ENABLEINVERT, 1, sMachIniFile) <> 0)
 
       ' Leggo utensili correnti
       ' lama
@@ -1351,6 +1384,29 @@ Public Class CurrentMachine
       m_nEnableBarCodeReader = GetPrivateProfileInt(S_MACH_BARCODEREADER, K_ENABLEBCR, 0, sMachIniFile)
    End Sub
 
+   ' Per il controllo FANUC al momento dell'inizializzazione del CN devono essere lette alcune variabili
+   Public Sub InitFANUC(CN_Generic As CN_generico)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nResetSendDelay = GetPrivateProfileInt(S_NCFANUC, K_RESETSENDDELAY, 1000, sMachIniFile)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nThreadSleep = GetPrivateProfileInt(S_NCFANUC, K_THREADSLEEP, 150, sMachIniFile)
+      ' Leggo i dati strettamente correlati alla comunicazione NC-PC
+      Dim CN As CN_generico = CN_Generic
+      ' Leggo l'indirizzo in cui scrivere lo stato macchina
+      Dim dAddNcMode As String = CN.s_addr_set_nc_mode
+      GetPrivateProfileString(S_NCFANUC, K_SETNCMODE, CN.s_addr_set_nc_mode, CN.s_addr_set_nc_mode, sMachIniFile)
+      ' Leggo primo indirizzo libero delle variabili di tipo intero
+      CN.n_Base_addr_int_vars = GetPrivateProfileInt(S_NCFANUC, K_BASEADDRINT, CN.n_Base_addr_int_vars, sMachIniFile)
+      ' Leggo primo indirizzo libero delle variabili di tipo bit
+      CN.n_Base_addr_byte_for_bits_vars = GetPrivateProfileInt(S_NCFANUC, K_BASEADDRBIT, CN.n_Base_addr_byte_for_bits_vars, sMachIniFile)
+      ' Leggo numero di variabili di tipo intero
+      CN.n_num_var_int_to_read = CShort(GetPrivateProfileInt(S_NCFANUC, K_NUMVARINT, CInt(CN.n_num_var_int_to_read), sMachIniFile))
+      ' Leggo numero di varibili di tipo bit
+      CN.n_num_var_byte_for_bits_to_read = CShort(GetPrivateProfileInt(S_NCFANUC, K_NUMVARBIT, CInt(CN.n_num_var_byte_for_bits_to_read), sMachIniFile))
+      ' Leggo variabile abilitata alla gestione di FeedHold
+      GetPrivateProfileString(S_NCFANUC, K_SETNCMODE, CN.s_addr_feedhold, CN.s_addr_feedhold, sMachIniFile)
+   End Sub
+
    Public Sub LoadWJMaterial(Optional bIsStart As Boolean = False)
       Dim TempCurrMat As Material = CurrMat
       ' Svuoto l'attuale lista di materiali

Machine/MachineCNPageUC.xaml

@@ -62,7 +62,7 @@
                   <ColumnDefinition Width="2*"/>
                </Grid.ColumnDefinitions>
 
-                    <Button Name="StartBtn" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="StartBtn" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
                <Button Name="StopBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
                <Button Name="ResetBtn" Grid.Column="2"

Machine/MachineStatusUC.xaml.vb

@@ -248,16 +248,16 @@ Public Class MachineStatusUC
          dL3 = ptTip.z
       End If
       ' Visualizzazione
-      Axis1TxBx.Text = LenToString(dL1, -3)
-      Axis2TxBx.Text = LenToString(dL2, -3)
-      Axis3TxBx.Text = LenToString(dL3, -3)
+      Axis1TxBx.Text = LenToString(dL1, -3, True)
+      Axis2TxBx.Text = LenToString(dL2, -3, True)
+      Axis3TxBx.Text = LenToString(dL3, -3, True)
       Axis4TxBx.Text = DoubleToString(dR1, -3)
       Axis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then Axis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayPositionDelta()
@@ -265,22 +265,28 @@ Public Class MachineStatusUC
       Dim dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10 As Double
       m_MainWindow.m_CNCommunication.GetAxesDeltas(dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10)
       ' Visualizzazione
-      DeltaAxis1TxBx.Text = LenToString(dL1, -3)
-      DeltaAxis2TxBx.Text = LenToString(dL2, -3)
-      DeltaAxis3TxBx.Text = LenToString(dL3, -3)
+      DeltaAxis1TxBx.Text = LenToString(dL1, -3, True)
+      DeltaAxis2TxBx.Text = LenToString(dL2, -3, True)
+      DeltaAxis3TxBx.Text = LenToString(dL3, -3, True)
       DeltaAxis4TxBx.Text = DoubleToString(dR1, -3)
       DeltaAxis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then DeltaAxis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayFeed()
       Dim dRealFeed As Double = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+      ' modifica richiesta 26/05/2023 da Rosario per cliente Lanzetta
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         dRealFeed = m_CN.d_DInterpo_Prog_Feed
+      Else
+         dRealFeed = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+      End If
       'Feed = DoubleToString(dRealFeed, 0)
-      FeedTxBx.Text = LenToString(dRealFeed, 0)
+      FeedTxBx.Text = LenToString(dRealFeed, 0, True)
       'FeedOverride = DoubleToString(m_CN.d_DInterpo_Feed_override, 0) & "%"
       Dim dFeedOverride As Double = m_CN.d_DInterpo_Feed_override
       FeedOverrideTxBx.Text = DoubleToString(dFeedOverride, 0) & "%"
@@ -304,6 +310,8 @@ Public Class MachineStatusUC
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          dSpindlePower = m_CN.d_data(0)
          dSpindleOvr = m_CN.d_data(1)
+      ElseIf m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         dSpindlePower = m_CN.d_spindle_power / 1000
       Else
          dSpindlePower = m_CN.d_spindle_power
          dSpindleOvr = If(m_CN.bPowerOvr > 0, m_CN.d_spindle_power / m_CN.bPowerOvr * 100, 0)

Machine/PolishingsPageUC.xaml.vb

@@ -61,8 +61,8 @@ Public Class PolishingsPageUC
       RepeatTxBl.Text = EgtMsg(91093)             ' Ripetizioni
       StepTxBl.Text = EgtMsg(90787)               ' Passo
       OffSetTxBl.Text = EgtMsg(91089)             ' Offset
-      RadiusTxBl.Text = "Raggio"
-      DistanceTxBl.Text = "Distanza"
+      RadiusTxBl.Text = EgtMsg(91139)             ' Raggio
+      DistanceTxBl.Text = EgtMsg(91140)           ' Distanza
       LiLoGpBx.Header = EgtMsg(91094)             ' Attacco/Uscita
       LiLenTxBl.Text = EgtMsg(91097)              ' Lunghezza
       LiHeightTxBl.Text = EgtMsg(91095)           ' Altezza

Machine/ToolChangerPosUC.xaml

@@ -9,7 +9,7 @@
    <!-- Definizione del ToolHolderUc -->
    <Grid>
       <Image Source="/Resources/ToolChangerPos.png"/>
-      <ToggleButton Name="Tool" Width="50" Height="50" Margin="22,40,26,8" Background="#7FB4B4B4">
+      <ToggleButton Name="Tool" Width="50" Height="50" Margin="62,10,16,10" Background="#7FB4B4B4">
          <ToggleButton.Template>
             <ControlTemplate TargetType="{x:Type ToggleButton}">
                <Grid>
@@ -25,7 +25,7 @@
 
          </ToggleButton.Template>
       </ToggleButton>
-      <TextBlock Name="PositionNameTxBl" Height="22" Width="68" FontSize="16" Margin="12,16,41,61"/>
+      <TextBlock Name="PositionNameTxBl" Height="22" Width="50" FontSize="16" Margin="20,40,70,53"/>
 
    </Grid>
 </UserControl>

MainWindow.xaml

@@ -53,7 +53,7 @@
             </ToggleButton>
          </Grid>
 
-         <Button Grid.Column="2" Style="{DynamicResource OmagCut_BlueIconButton}" Click="ExitBtn_Click">
+         <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_BlueIconButton}" Click="ExitBtn_Click">
             <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
    

MainWindow.xaml.vb

@@ -38,6 +38,8 @@ Class MainWindow
    Friend m_MachinePageUC As MachinePageUC
    Friend m_OptionsPageUC As OptionsPageUC
 
+   Friend m_IsClosingApplication As Integer = 0
+
    ' Dichiarazione variabili direttori
    Private m_sExeRoot As String = String.Empty
    Private m_sDataRoot As String = String.Empty
@@ -98,6 +100,7 @@ Class MainWindow
       OFFICE_TYPE = 2 ^ 19                '  524288
       REGISTRATION = 2 ^ 20               ' 1048576
       SIMPLESTATISTICS = 2 ^ 21           ' 2097152
+      COMPOFRAME = 2 ^ 22                 ' 4194304
    End Enum
    ' Opzione nesting automatico
    Private m_bAutoNest As Boolean = False
@@ -326,8 +329,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2501, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2501, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2506, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2506, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -558,7 +561,7 @@ Class MainWindow
             End If
       End If
       ' --------------------------------- SLAB DB -------------------------------------------------------
-
+      ExitBtn.ToolTip = "Exit" & vbCrLf & "Minimize (Shift)"
    End Sub
 
    Private Sub ManageSingleIstance()
@@ -1085,6 +1088,19 @@ Class MainWindow
          m_CurrentProjectPageUC.SaveNamedProject()
          m_CurrentProjectPageUC.SaveProject()
       End If
+      ' Inizio la chiusura del programma (verifico di aver terminato il processo DripFeed)
+      EgtOutLog("Iniziato processo di chiusura programma")
+      m_IsClosingApplication = 1
+      Dim nCount As Integer = 0
+      While m_IsClosingApplication <> 2
+         If nCount > 5 Then
+            Exit While
+         End If
+         ' verifico che il processo DripFeed sia terminato
+         EgtOutLog("Stato chiusura programma: " & m_IsClosingApplication.ToString)
+         Thread.Sleep(100)
+         nCount += 1
+      End While
       ' Uscita
       MainWindowExit()
    End Sub
@@ -1211,7 +1227,8 @@ Class MainWindow
          m_ProdLineTimer.Interval = TimeSpan.FromMilliseconds(2000)
          m_ProdLineTimer.Start()
       End If
-
+      ' di default attivo la pagina CadCut
+      m_ActivePage = MainWindow.Pages.CadCut
       ' seleziono il tipo di avvio
       m_CurrentProjectPageUC.StartProgram()
       ' aggiorno la grafica

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.5.1.2")>
-<Assembly: AssemblyFileVersion("2.5.1.2")>
+<Assembly: AssemblyVersion("2.5.6.2")>
+<Assembly: AssemblyFileVersion("2.5.6.2")>

NcComm/CNCommunication.vb

@@ -2,6 +2,8 @@
 Imports System.Globalization
 Imports System.Collections.ObjectModel
 Imports EgtUILib
+Imports System.IO
+Imports System.Text
 
 Public Class CNCommunication
 
@@ -31,6 +33,7 @@ Public Class CNCommunication
    Private m_bNewDeltaData As Boolean = True
    Private m_bNewVarData As Boolean = False
    Private m_bTimerBusy As Boolean = False
+   Private m_bTimerAxesBusy As Boolean = False
 
    Private m_IsNewConsole As Boolean = False
 
@@ -39,6 +42,7 @@ Public Class CNCommunication
 
    ' Timer
    Private m_RefreshTimer As New DispatcherTimer
+   Private m_RefreshAxesFanuc As New DispatcherTimer
 
    ' Nomi e indici degli assi macchina
    Private m_bAxesOk As Boolean = False
@@ -101,6 +105,12 @@ Public Class CNCommunication
          m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(100)
          m_RefreshTimer.Start()
       End If
+      ' solo per controllo FANUC creo un timer apposito solo per la lettura degli assi
+      If m_nNCType = 4 Then
+         AddHandler m_RefreshAxesFanuc.Tick, AddressOf RefreshAxesFanucTimer_tick
+         m_RefreshAxesFanuc.Interval = TimeSpan.FromMilliseconds(50)
+         m_RefreshAxesFanuc.Start()
+      End If
 
       ' Leggo dati sugli assi della macchina
       ReadAxesData()
@@ -117,10 +127,16 @@ Public Class CNCommunication
 
          If m_nNCType = 3 Then
             RefreshNoEvents()
+         ElseIf m_nNCType = 4 Then
+            RefreshFANUC()
          Else
             Refresh()
          End If
 
+         If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sClickState) Then
+            ClickOnPolishLine()
+         End If
+
          m_bTimerBusy = False
          m_RefreshTimer.Start()
       Else
@@ -129,8 +145,22 @@ Public Class CNCommunication
 
    End Sub
 
+   Private Sub RefreshAxesFanucTimer_tick()
+      If Not m_bTimerAxesBusy Then
+         m_bTimerAxesBusy = True
+         m_RefreshAxesFanuc.Stop()
+
+         RefreshAxesFANUC()
+
+         m_bTimerAxesBusy = False
+         m_RefreshAxesFanuc.Start()
+      Else
+         Dim nDummy As Integer = 10
+      End If
+   End Sub
+
    Private Sub ReadAxesData()
-      ' Nomi e indici degli assi macchina
+      ' Nomi e indici degli assi macchina: definisco il nome degli assi da satampare nella pagina MachineStatusUC
       m_bAxesOk = True
       GetPrivateProfileString(S_AXES, K_L1NAME, "X", m_sA1, m_MainWindow.GetMachIniFile())
       m_nA1 = GetPrivateProfileInt(S_AXES, K_L1ID, 0, m_MainWindow.GetMachIniFile())
@@ -222,6 +252,11 @@ Public Class CNCommunication
                m_CN = New Num.NumNC
             Case 3
                m_CN = New CN_Siemens
+            Case 4
+               ' Fanuc
+               m_CN = New Fanuc.Fanuc
+               ' proveddo a sovrscrivere i datti di comunicazione PC-NC settati di default nella classe CN_Generico
+               m_MainWindow.m_CurrentMachine.InitFANUC(m_CN)
          End Select
          ' Recupero la stringa di inizializzazione della comunicazione
 
@@ -354,8 +389,13 @@ Public Class CNCommunication
             If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.Remote, sVal)
          End If
 
-            ' Inizializzo la comunicazione
-            m_CN.Init()
+         ' Solo per controllo FANUNC
+         GetPrivateProfileString(S_NCDATA, K_NAXES, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.nAxes, sVal)
+
+
+         ' Inizializzo la comunicazione
+         m_CN.Init()
 
       Catch ex As Exception
          ' set status to statusbar
@@ -418,6 +458,17 @@ Public Class CNCommunication
                   m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Red")
                End Try
             End If
+         Case 4
+            If IsNothing(m_CN) OrElse m_CN.n_state < 2 Then
+               ' Per evitare crash con azioni verso il controllo, avvio quello di debug
+               m_nNCType = 0
+               Me.m_CN = New CN_Debug
+               m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Red")
+            Else
+               ' ATTENZIONE: durante l'inizializzazione della classe il vettore che contiene tutti gli indirizzi di memoria non è caricato
+               m_CN.b_axis_events_enable = True
+               m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_DarkGray")
+            End If
       End Select
 
       ' Assegno riferimento al CN alle diverse pagine
@@ -452,6 +503,31 @@ Public Class CNCommunication
 
    End Sub
 
+   Private Sub ClickOnPolishLine()
+      ' Se richiesto di scattare foto sulla linea di lucidatura
+      m_CN.n_DReadELS_handle = 0
+      m_CN.ReadEls_Add_Parameter(m_MainWindow.m_CurrentMachine.sClickState, 1)
+      Dim nClickState As Integer = 0
+      For I As Integer = 0 To 10
+         System.Threading.Thread.Sleep(50)
+         If m_CN.n_DReadELS_handle = 1 Then
+            nClickState = CInt(m_CN.d_DReadELS_value)
+            If nClickState = 1 Then
+               ' procedo a costruire un nuovo file nella cartella indicata in configurazione
+               Try
+                  File.Create(m_MainWindow.m_CurrentMachine.sClickDir & "\NewClick.txt")
+                  ' Dichiaro di aver provveduto a comunicare di scattare la foto
+                  m_CN.DVariables_WriteVariables2(m_MainWindow.m_CurrentMachine.sClickState, "0")
+               Catch ex As Exception
+                  EgtOutLog("Error on PolishLine comunication: " & ex.ToString)
+               End Try
+            End If
+            Exit For
+         End If
+      Next
+
+   End Sub
+
    Private Sub Refresh()
 
       If m_bNewPosData Then
@@ -464,6 +540,7 @@ Public Class CNCommunication
          m_MachineStatus.DisplayPositionDelta()
       End If
 
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
       If m_CN.b_feed_changed Then
          m_CN.b_feed_changed = False
          m_MachineStatus.DisplayFeed()
@@ -490,12 +567,14 @@ Public Class CNCommunication
          'FrmMain.LblToolRad.Text = cn.Tools(0).radius.ToString
          'FrmMain.LblToolComp.Text = cn.Tools(0).comp_num.ToString
       End If
+      ' ----- FINE : lettura diretta di specifiche vaiabili -----
 
       Select Case m_nNCType
          Case 1
             If m_CN.read_active_mode() <> m_nCurrMode Then
                m_nCurrMode = m_CN.read_active_mode()
                m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+               m_CN.nMachineMode = m_nCurrMode
             End If
          Case 2
             If m_CN.nMachineMode <> m_nCurrMode Then
@@ -530,6 +609,7 @@ Public Class CNCommunication
          'End If
       End If
 
+      ' QUESTE VARIABILI NON SONO LETTE IN QUANTO NON SONO STATE CARICATE → vedere come esempio il NUM che assegna queste variabili
       ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
       If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
          If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
@@ -568,8 +648,187 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.CloseAllChanged(m_CN.bCloseAllState)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open123Changed(m_CN.bOpen123State)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open456Changed(m_CN.bOpen456State)
-            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
-            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            ' in assenza della configurazione delle variabili Close123 e Close456
+            If Not String.IsNullOrEmpty(m_CN.m_szCnDataVar(CN_generico.CnData.Close123State)) Then
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(Not m_CN.bOpen123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(Not m_CN.bOpen456State)
+            End If
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BlowChanged(m_CN.bBlowState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOnChanged(m_CN.bVacuumOn)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOffChanged(m_CN.bVacuumOff)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BypassChanged(m_CN.bBypassState)
+
+            ' Nuovi bottoni (uso joystick)
+            If m_IsNewConsole Then
+               m_MainWindow.m_DirectCutPageUC.XYJogChanged(m_CN.bXYJog)
+               m_MainWindow.m_DirectCutPageUC.ZCJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.ZBJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
+            End If
+         Else
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserTracStateChanged(m_CN.bLaserTracState)
+            If m_CN.Is_G24_active() Then
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(False)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(True)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(False)
+            End If
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.HomeStateChanged(m_CN.bHomeState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
+
+            ' Nuovi bottoni (uso joystick) per Area4
+            If m_IsNewConsole Then
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.XYJogChanged(m_CN.bXYJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
+            End If
+
+         End If
+      End If
+
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.RawPart Then
+         m_MainWindow.m_RawPartPage.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+      End If
+
+      ' Nuove bottoni (Power Macchina)
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         If m_IsNewConsole Then
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+         End If
+         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+      End If
+
+
+
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.WorkInProgress Then
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.LaserTracStateChanged(m_CN.bLaserTracState)
+         If m_CN.Is_G24_active() Then
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ThreeAxisStateChanged(False)
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.FiveAxisStateChanged(True)
+         Else
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.FiveAxisStateChanged(False)
+         End If
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
+      End If
+
+   End Sub
+
+   Private Sub RefreshAxesFANUC()
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
+      ' avvio lettura variabili da CN
+      m_CN.Geppo()
+      ' notifico valori all'interfaccia
+      m_MachineStatus.DisplayPosition()
+      m_MachineStatus.DisplayPositionDelta()
+      m_MachineStatus.DisplayFeed()
+      m_MachineStatus.DisplaySpeed()
+      m_MachineStatus.DisplayPower()
+   End Sub
+
+   Private Sub RefreshFANUC()
+      ' Copia della funzione Refresh
+
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
+      '' avvio lettura variabili da CN
+      'm_CN.Geppo()
+      '' notifico valori all'interfaccia
+      'm_MachineStatus.DisplayPosition()
+      'm_MachineStatus.DisplayPositionDelta()
+      'm_MachineStatus.DisplayFeed()
+      'm_MachineStatus.DisplaySpeed()
+      'm_MachineStatus.DisplayPower()
+      ' eventualmente carico messaggi di errore
+      ErrorList.Clear()
+      If m_CN.b_NC_error Then
+         ErrorList.Clear()
+         SyncLock m_CN
+            For Each Item As String In m_CN.sz_NC_error_messages
+               ErrorList.Add(Item)
+            Next
+         End SyncLock
+      End If
+      m_AlarmsPage.NcError()
+      ' ----- FINE  : lettura diretta di specifiche vaiabili -----
+
+      If m_CN.read_active_mode() <> CShort(m_nCurrMode) Then
+         m_nCurrMode = CInt(m_CN.read_active_mode())
+         m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+         m_CN.nMachineMode = m_nCurrMode
+      End If
+
+      ' QUESTE VARIABILI NON SONO LETTE IN QUANTO NON SONO STATE CARICATE → vedere come esempio il NUM che assegna queste variabili
+      ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
+         If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.SpindleStateChanged(m_CN.bSpindleState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LaserStateChanged(m_CN.bLaserState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LaserTracStateChanged(m_CN.bLaserTracState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.CoolantStateChanged(m_CN.bCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.InternalCoolantStateChanged(m_CN.bInternalCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ExternCoolantStateChanged(m_CN.bExternCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.CBAxesStateChanged(m_CN.bCBAxesState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.AirBlowStateChanged(m_CN.bAirBlowState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.HomeStateChanged(m_CN.bHomeState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.TableDownChanged(m_CN.bTableDownState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.DoorClosedChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LimitZChanged(m_CN.bLimitZState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.FiveAxisStateChanged(m_CN.Is_G24_active())
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ParkingStateChanged(m_CN.bParkingState)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ZoneStateChanged(m_CN.nEnableZone)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.PcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumUpChanged(m_CN.bVacuumUp)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumDownChanged(m_CN.bVacuumDown)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2UpChanged(m_CN.bVacuum2Up)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2DownChanged(m_CN.bVacuum2Down)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum0Changed(m_CN.bVacuum0)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum90Changed(m_CN.bVacuum90)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum1Changed(m_CN.bVacuum1State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2Changed(m_CN.bVacuum2State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum3Changed(m_CN.bVacuum3State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum4Changed(m_CN.bVacuum4State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum5Changed(m_CN.bVacuum5State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum6Changed(m_CN.bVacuum6State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum135Changed(m_CN.bVacuum135State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum246Changed(m_CN.bVacuum246State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.OpenAllChanged(m_CN.bOpenAllState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.CloseAllChanged(m_CN.bCloseAllState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open123Changed(m_CN.bOpen123State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open456Changed(m_CN.bOpen456State)
+            ' in assenza della configurazione delle variabili Close123 e Close456
+            If Not String.IsNullOrEmpty(m_CN.m_szCnDataVar(CN_generico.CnData.Close123State)) Then
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(Not m_CN.bOpen123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(Not m_CN.bOpen456State)
+            End If
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BlowChanged(m_CN.bBlowState)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOnChanged(m_CN.bVacuumOn)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOffChanged(m_CN.bVacuumOff)
@@ -619,12 +878,17 @@ Public Class CNCommunication
       End If
 
       ' Nuove bottoni (Power Macchina)
-      If m_IsNewConsole AndAlso m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
-         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
-         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         If m_IsNewConsole Then
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+         End If
          m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
       End If
 
+
+
       If m_MainWindow.m_ActivePage = MainWindow.Pages.WorkInProgress Then
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
@@ -907,28 +1171,84 @@ Public Class CNCommunication
          End If
          ' Se richiesta successiva attivazione, faccio reset
          If bActivate Then
+            EgtOutLog("Call function: DGeneralFunctions_Reset")
+            TimeSpanInit()
             m_CN.DGeneralFunctions_Reset()
+            EgtOutLog(TimeSpanEnd())
          End If
          ' Attesa opportuna
          System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nResetSendDelay)
          If m_nNCType = 1 Then
             ' Cancellazione eventuale file già presente con lo stesso nome (ignoro eventuale errore)
+            EgtOutLog("Delete_NC_prog(sNumProg)")
+            TimeSpanInit()
             m_CN.Delete_NC_prog(sNumProg)
+            EgtOutLog(TimeSpanEnd())
             ' Attesa opportuna
             System.Threading.Thread.Sleep(100)
+         ElseIf m_nNCType = 4 Then
+            ' FANUC: imposto modalità EDIT 
+            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(1) = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
          End If
+         EgtOutLog("Download_NC_prog(sCncPath, sNumProg)")
+         ' -------------- START DOWNLOAD -------------- 
+         TimeSpanInit()
          bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
          ' Attesa opportuna
          System.Threading.Thread.Sleep(100)
+         ' FANUC: genero un file 901 vuoto da aspedire, attivare; poi rispedisco il file 900
+         If m_nNCType = 4 And Not bOk Then
+            bOk = True
+            Dim sCncPath1 As String = m_MainWindow.GetCncDir() & "\PlaceHolder" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+            Dim fs As FileStream = File.Create(sCncPath1)
+            ' Add text to the file.
+            Dim info As Byte() = New UTF8Encoding(True).GetBytes(vbLf & "(PlaceHolder)")
+            fs.Write(info, 0, info.Length)
+            fs.Close()
+            bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath1, "901") = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+            If bActivate Then
+               bOk = bOk AndAlso (m_CN.ActivateProgram("901") = 0)
+               ' Attesa opportuna
+               System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+            End If
+            ' riprovo ad eseguire il programma 900
+            bOk = True
+            bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+         End If
+         EgtOutLog("Nc Type : " & m_nNCType.ToString)
+         ' AXIUM (NUM OLD): se DripFeed non esegluo attivazione programma)
+         If m_nNCType = 1 AndAlso m_CN.bIsDripFeed Then
+            ' eventauli cambi di stato sono trattati all'interno della funzione DownLoad_NC_prog
+            Return True
+         End If
+         EgtOutLog(TimeSpanEnd())
+         ' --------------  END  DOWNLOAD -------------- 
+         ' -------------- START ACTIVATE -------------- 
          ' Se richiesta attivazione
          If bActivate Then
             ' Attivazione programma
+            EgtOutLog("ActivateProgram(nNumProg)")
+            TimeSpanInit()
             bOk = bOk AndAlso (m_CN.ActivateProgram(nNumProg) = 0)
+            EgtOutLog(TimeSpanEnd())
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(100)
+            ' Attivo la modalità AUTO prima per preparar il cyclo start
+            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(0) = 0)
             ' Attesa opportuna
             System.Threading.Thread.Sleep(100)
             ' Modalità automatica
-            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(0) = 0)
+            EgtOutLog("DGeneralFunctions_WriteCncMode(0)")
+            TimeSpanInit()
+            EgtOutLog(TimeSpanEnd())
          End If
+         ' --------------  END  ACTIVATE -------------- 
          ' Messaggio con risultato
          If bOk Then
             m_CurrProjPage.SetInfoMessage(EgtMsg(90317))        'Programma CN trasmesso con successo

NcComm/CN_generico.vb

@@ -8,7 +8,7 @@ Public MustInherit Class CN_generico
    Public Const MAX_VAR As Short = 100
    Public Const MAX_VALUES As Short = 9           ' Max. index to read the data from the FXServer array
    Public Const MAX_TOOLS As Short = 100
-   Public Const NUM_DATA = 55                     ' Numero di dati del CN (Speed,Feed,...)
+   Public Const NUM_DATA = 56                     ' Numero di dati del CN (Speed,Feed,...)
 
    Public m_NewVariable As Boolean = False        ' per scrittura delle vairbaili Apllication del PLC
 
@@ -70,8 +70,18 @@ Public MustInherit Class CN_generico
       Parking = 52
       EnableZone = 53
       EnablePC = 54
+
+      nAxes = 55
    End Enum
 
+   Public Enum Type As Short
+      TBoolean = 0
+      TInteger = 1
+      TLong = 2
+      TDouble = 3
+      TString = 4
+
+   End Enum
 #End Region
 
 #Region " Struct"
@@ -218,10 +228,27 @@ Public MustInherit Class CN_generico
    Public bRemote As Boolean
    ' Nuovi di bottoni -------------------------------------------
 
+   ' solo per NumOld
+   Public bIsDripFeed As Boolean = False
+
+   ' usato nel FANUC per leggere lo stato macchina se 5 assi attivo
+   Public b5AxesActive As Boolean
+
    Public nMachineMode As Integer
 
    Public m_szCnDataVar(NUM_DATA - 1) As String
-
+   '
+   ' nuovi dal 29-III-2023 per Fanuc
+   '
+   Public n_Base_addr_int_vars As Integer = 59800
+   Public n_Base_addr_byte_for_bits_vars As Integer = 59820
+   Public n_num_var_int_to_read As Short = 10
+   Public n_num_var_byte_for_bits_to_read As Short = 30
+   Public s_addr_set_nc_mode As String = "D59825"
+   Public s_addr_feedhold As String = "D59850.6"
+   '
+   ' Eventi
+   '
    Public Event NewPositionData(ByVal sender As Object)
    Public Event NewPosDeltaData(ByVal sender As Object)
    Public Event NewVarChanged(ByVal sender As Object)
@@ -294,8 +321,8 @@ Public MustInherit Class CN_generico
 
    Public MustOverride Function DTool_set_read_range(n_start As Short, n_stop As Short) As Short
 
-   Public MustOverride Function DTool_write_tool(n_tool_number As Short, Length_X As Double, Radius As Double, TipRadius_Z As Double, _
-                                    DLength_X As Double, DTipRadius_Z As Double, _
+   Public MustOverride Function DTool_write_tool(n_tool_number As Short, Length_X As Double, Radius As Double, TipRadius_Z As Double,
+                                    DLength_X As Double, DTipRadius_Z As Double,
                                     nDirection As Short, nType As Short, nH As Integer) As Short
 
    Public Overridable Function SetProgramMainOrSub(bMain As Boolean) As Boolean
@@ -341,4 +368,36 @@ Public MustInherit Class CN_generico
 
 #End Region
 
+#Region " Nuovi metodi pubblici"
+
+   Public Overridable Function NC_read_var_short(VarAddr As String, ByRef value As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_read_var_short_range(VarStartAddr As String, VarEndAddr As String, ByRef values() As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_write_var_short(VarAddr As String, ByRef value As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_read_var_bit(VarAddr As String, ByRef value As Boolean) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_write_var_bit(VarAddr As String, ByRef value As Boolean) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_pulse_bit(VarAddr As String) As Boolean
+      Return False
+   End Function
+   Public Overridable Function Geppo() As Boolean
+      Return False
+   End Function
+
+#End Region
+
+
 End Class

OmagCUT.vbproj

@@ -122,11 +122,13 @@
       <SpecificVersion>False</SpecificVersion>
       <HintPath>..\..\EgtProg\DllD32\EgtUILib.dll</HintPath>
     </Reference>
-    <Reference Include="EgtWPFLib">
-      <HintPath>..\..\EgtProg\DllD32\EgtWPFLib.dll</HintPath>
+    <Reference Include="EgtWPFLib, Version=2.5.2.2, Culture=neutral, processorArchitecture=MSIL">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\EgtProg\Dll32\EgtWPFLib.dll</HintPath>
     </Reference>
-    <Reference Include="EgtWPFLib5">
-      <HintPath>..\..\EgtProg\OmagCUT\EgtWPFLib5.dll</HintPath>
+    <Reference Include="EgtWPFLib5, Version=2.5.2.2, Culture=neutral, processorArchitecture=MSIL">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\EgtProg\Dll32\EgtWPFLib5.dll</HintPath>
     </Reference>
     <Reference Include="Interop.FXLib">
       <HintPath>..\..\EgtProg\OmagCUT\Interop.FXLib.dll</HintPath>
@@ -225,6 +227,9 @@
     <Compile Include="Machine\WaterJetPageUC.xaml.vb">
       <DependentUpon>WaterJetPageUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="NcComm\fwlib32.vb" />
+    <Compile Include="NcComm\M_Fanuc.vb" />
+    <Compile Include="NcComm\M_Fanuc_hi.vb" />
     <Compile Include="Project\AddToDataBaseUC.xaml.vb">
       <DependentUpon>AddToDataBaseUC.xaml</DependentUpon>
     </Compile>
@@ -240,6 +245,9 @@
     <Compile Include="Project\CicloStartWD.xaml.vb">
       <DependentUpon>CicloStartWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="RawPhoto\OtherRefTabWD.xaml.vb">
+      <DependentUpon>OtherRefTabWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="RawPhoto\SlabIdWD.xaml.vb">
       <DependentUpon>SlabIdWD.xaml</DependentUpon>
     </Compile>
@@ -514,6 +522,10 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="RawPhoto\OtherRefTabWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="RawPhoto\SlabIdWD.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -896,7 +908,7 @@
     <Resource Include="Resources\MachineStatusImage\Single.png" />
   </ItemGroup>
   <ItemGroup>
-    <Resource Include="Resources\ToolChangerPos.png" />
+    <Resource Include="Resources\ToolChangerPos_OLD.png" />
   </ItemGroup>
   <ItemGroup>
     <Resource Include="Resources\Manual.png" />
@@ -1322,6 +1334,12 @@
   <ItemGroup>
     <Resource Include="Resources\NewIcons\Quality.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\ToolChangerPos.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\RefTab.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDarkDictionary.xaml

@@ -32,6 +32,7 @@
     <BitmapImage x:Key="AlignPiecesImg" UriSource="Resources/NewIcons/ruota-oggetto-inclinato.png"></BitmapImage>
     <BitmapImage x:Key="BarCodeImg" UriSource="Resources/NewIcons/BarCode.png"></BitmapImage>
     <BitmapImage x:Key="SlabIdImg" UriSource="Resources/NewIcons/SlabId.png"></BitmapImage>
+    <BitmapImage x:Key="RefTabImg" UriSource="Resources/NewIcons/RefTab.png"></BitmapImage>
     <BitmapImage x:Key="BottomLeftImg" UriSource="Resources/NewIcons/1-BottomLeft.png"></BitmapImage>
     <BitmapImage x:Key="BottomRightImg" UriSource="Resources/NewIcons/2-BottomRight.png"></BitmapImage>
     <BitmapImage x:Key="PartRotOnImg" UriSource="Resources/NewIcons/PartRotOn.png"></BitmapImage>

OmagCUTDictionary.xaml

@@ -102,6 +102,7 @@
     <BitmapImage x:Key="AlignPiecesImg" UriSource="Resources/AlignPieces.png"></BitmapImage>
     <BitmapImage x:Key="BarCodeImg" UriSource="Resources/BarCode.png"></BitmapImage>
     <BitmapImage x:Key="SlabIdImg" UriSource="Resources/SlabId.png"></BitmapImage>
+    <BitmapImage x:Key="RefTabImg" UriSource="Resources/NewIcons/RefTab.png"></BitmapImage>
     <BitmapImage x:Key="BottomLeftImg" UriSource="Resources/BottomLeft.png"></BitmapImage>
     <BitmapImage x:Key="BottomRightImg" UriSource="Resources/BottomRight.png"></BitmapImage>
     <BitmapImage x:Key="PartRotOnImg" UriSource="Resources/PartRotOn.png"></BitmapImage>

Project/CurrentProjectPageUC.xaml.vb

@@ -412,6 +412,11 @@ Public Class CurrentProjectPageUC
       SetTotalArea(dTotArea)
       UpdateToProduceArea()
       ShowAreas()
+      ' Salvo info di C home
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHome, 0))
+      EgtZoom(ZM.ALL)
       ' Dichiaro progetto non modificato
       EgtResetModified()
       Return True
@@ -522,7 +527,21 @@ Public Class CurrentProjectPageUC
          m_MainWindow.m_CurrentMachine.dAdditionalTable = dValue
       End If
       ' forzo visualizzazione eventuali dati su aree
-      SetAreasStatus( True)
+      SetAreasStatus(True)
+      ' Recupero info C Home
+      Dim dCHomeCurrMach As Double
+      Dim dCHomeCurrproj As Double
+      EgtGetAxisHomePos("C", dCHomeCurrMach)
+      ' Verifico che esista l'info del progetto
+      If EgtExistsInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME) Then
+         EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, dCHomeCurrproj)
+         ' Se la macchina indicata ha C Home differente allora comunico un errore del progetto
+         If Math.Abs(dCHomeCurrproj - dCHomeCurrMach) > EPS_ANG_SMALL Then
+            EgtOutLog(" WARNING -> C axes home project is different from current machine, delta ang C home:" & DoubleToString(dCHomeCurrproj - dCHomeCurrMach, 2))
+         End If
+      Else
+         EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHomeCurrMach, 0))
+      End If
       ' Dichiaro progetto non modificato
       EgtResetModified()
       Return True

Project/OpenPageUC.xaml.vb

@@ -491,7 +491,19 @@ Public Class OpenPageUC
       m_SceneButtons.MeasureBtn.IsChecked = False
       ' Istruzioni per chiudere OpenPageUC e aprire currentproject e cadcut page
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_OpenPage)
-      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+      If m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.CadCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
+            m_MainWindow.CadCutBtn.IsChecked = True
+         End If
+      ElseIf m_MainWindow.m_PrevActivePage = MainWindow.Pages.FrameCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.FrameCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
+            m_MainWindow.FrameCutBtn.IsChecked = True
+         End If
+      End If
       ' Non modifico progetto corrente
       m_MainWindow.m_ActivePage = m_MainWindow.m_PrevActivePage
    End Sub

Project/ProjectMgrUC.xaml.vb

@@ -1,4 +1,7 @@
-Imports System.IO
+Imports System.ComponentModel
+Imports System.Drawing
+Imports System.IO
+Imports System.Windows.Forms.Integration
 Imports EgtUILib
 Imports EgtWPFLib
 
@@ -30,6 +33,7 @@ Public Class ProjectMgrUC
          WorkBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 2)        'Work - Lavora
       End If
       TestBtn.ToolTip = EgtMsg(90255)                          'Test
+      ResetCutBtn.ToolTip = "Reset Cuts" & vbCrLf & "Reset Feed (Shift)"
    End Sub
 
    Private Sub ProjectMgrUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -99,7 +103,6 @@ Public Class ProjectMgrUC
       m_CurrProjPage.NewProject(nTabInd, bRetainParkedParts)
       ' Gestione stato FastGrid
       m_MainWindow.m_CadCutPageUC.m_FastGridSlabManager.OnPostNewProject()
-      EgtZoom(ZM.ALL)
    End Sub
 
    Friend Function ChooseTable() As Integer
@@ -249,6 +252,11 @@ Public Class ProjectMgrUC
    End Sub
 
    Private Sub ResetCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCutBtn.Click
+      If (Keyboard.Modifiers And ModifierKeys.Shift) Then
+         ' eseguo il ricalcolo delle sole FEED di lavorazione
+         UpdateFeedAllMachining()
+         Return
+      End If
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Cancello eventuali messaggi
       m_CurrProjPage.ClearMessage()
@@ -262,6 +270,12 @@ Public Class ProjectMgrUC
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
       If nWarn = 1 Then m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SPLITPAGEUC + 11)) ' Lama troppo grande per utilizzo ventosa
+      ' Se eistono elimino i grezzi delle fasi che non contengono lavorazioni
+      ResetAllRawPart()
+      ' Aggiorno Info C Home
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHome, 0))
       ' Aggiorno visualizzazione
       EgtDraw()
    End Sub
@@ -478,7 +492,6 @@ Public Class ProjectMgrUC
       If Not (m_CurrMachine.bProdLine Or m_CurrMachine.bDemo) Then
          ' Download programma (eventuali errori sono segnalati dalla funzione)
          If m_CurrNcComm.SendProgram(sCncPath, 900) Then
-            ' copio il progetto corrente come progetto in lavorazione
             Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
             My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
             ' se abilitato e non è restart, lancio eventuale lua post-trasmissione
@@ -705,6 +718,112 @@ Public Class ProjectMgrUC
       End While
    End Sub
 
+   Public Sub UpdateFeedAllMachining()
+      ' recupero il valore di Feed della lavorazione corrente
+      Dim sMachiningName As String = String.Empty
+      If Not EgtMdbGetCurrMachiningParam(MCH_MP.NAME, sMachiningName) Then
+         ' errore: lavorazione non trovata
+         EgtOutLog(" - Prima di 'Reset Feed' accedere alla pagina MACCHINA!")
+         'm_MainWindow.m_CurrentProjectPageUC.SetErrorMessage("Salvare la lavorazione corrente")
+         Return
+      End If
+      Dim dFeed As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.FEED, dFeed)
+      Dim dFeedStarted As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.STARTFEED, dFeedStarted)
+      Dim dFeedEnded As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.ENDFEED, dFeedEnded)
+      Dim dFeedTipped As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.TIPFEED, dFeedTipped)
+      Dim dFeedBack As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.BACKFEED, dFeedBack)
+      Dim dFeedSideAng As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.SIDEANGFEED, dFeedSideAng)
+      Dim MachiningList As New List(Of SplitMach)
+
+      ' Recupero l'indice della fase corrente
+      Dim nCurrPhase As Integer = 1
+      ' recupero in numero di fasi presenti nel progetto
+      Dim nCountPhase As Integer = EgtGetPhaseCount()
+      ' ciclo su tutte le fasi di lavorazione
+      Dim nMach As Integer = 0
+      Dim nMachUpdated As Integer = 0
+      For IndexPhase As Integer = 1 To nCountPhase
+         ' imposto la fase corrente
+         nCurrPhase = IndexPhase
+         ' Preparo la lista delle lavorazioni
+         CalculateSplitMachList(nCurrPhase, MachiningList)
+         ' per ogni lavorazione corrente procedo ad aggiornare la feed
+         For IndexMachining As Integer = 0 To MachiningList.Count - 1
+            nMach += 1
+            Dim nOperId As Integer = MachiningList(IndexMachining).m_nId
+            ' setto la lavorazione come corrente
+            If EgtSetCurrMachining(nOperId) Then
+               Dim bUpdate As Boolean = False
+               ' STANDARD
+               Dim dOrigFeed As Double
+               EgtGetMachiningParam(MCH_MP.FEED, dOrigFeed)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeed - dFeed) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.FEED, dFeed)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' STARTED
+               Dim dOrigFeedStarted As Double
+               EgtGetMachiningParam(MCH_MP.STARTFEED, dOrigFeedStarted)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedStarted - dFeedStarted) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.STARTFEED, dFeedStarted)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' ENDED
+               Dim dOrigFeedEnded As Double
+               EgtGetMachiningParam(MCH_MP.ENDFEED, dOrigFeedEnded)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedEnded - dFeedEnded) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.ENDFEED, dFeedEnded)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' TIPPED
+               Dim dOrigFeedTipped As Double
+               EgtGetMachiningParam(MCH_MP.TIPFEED, dOrigFeedTipped)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedTipped - dFeedTipped) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.TIPFEED, dFeedTipped)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' BACK
+               Dim dOrigFeedBack As Double
+               EgtGetMachiningParam(MCH_MP.BACKFEED, dOrigFeedBack)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedBack - dFeedBack) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.BACKFEED, dFeedBack)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' SIDEANG
+               Dim dOrigFeedSideAng As Double
+               EgtMdbGetCurrMachiningParam(MCH_MP.SIDEANGFEED, dOrigFeedSideAng)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedBack - dFeedSideAng) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.SIDEANGFEED, dFeedSideAng)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' conto il numero di lavorazioni aggiornate
+               If bUpdate Then
+                  nMachUpdated += 1
+               End If
+            End If
+         Next
+      Next
+      m_MainWindow.m_CurrentProjectPageUC.SetInfoMessage("Lavorazione aggiornate: " & nMachUpdated & "/ " & nMach)
+   End Sub
+
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------
    Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double)
 

RawPhoto/Camera.vb

@@ -315,6 +315,16 @@ Public Class Camera
       GetPrivateProfileString(S_NCDATA, K_SPOTLIGHT2, "", sPLCVarSpotLight2, m_MainWindow.GetMachIniFile())
       Dim nPhotoDeley As Integer = GetPrivateProfileInt(S_NCNUM, K_PHOTODELEY, "100", m_MainWindow.GetMachIniFile())
 
+      ' eventualmente rimuovo inizio stringa: "PLC, ___"
+      Dim sItemString1() As String = Split(sPLCVarSpotLight1, ","c)
+      If sItemString1.Count > 1 Then
+         sPLCVarSpotLight1 = sItemString1(1).Trim
+      End If
+      Dim sItemString2() As String = Split(sPLCVarSpotLight2, ","c)
+      If sItemString2.Count > 1 Then
+         sPLCVarSpotLight2 = sItemString2(1).Trim
+      End If
+
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
          Case 1, 2
             If m_MainWindow.m_CNCommunication.m_nNCType = 2 Then

RawPhoto/OtherRefTabWD.xaml

@@ -0,0 +1,82 @@
+<Window x:Class="OtherRefTabWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   FontFamily="{DynamicResource OmagCut_Font}"
+   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+   Title="ModifStartEndWD" Height="250" Width="320" ShowInTaskbar="False">
+
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid x:Name="SaveNameGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.2*"/>
+                <ColumnDefinition Width="2*"/>
+                <ColumnDefinition Width="2*"/>
+                <ColumnDefinition Width="0.2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <!--<RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>-->
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.2*"/>
+            </Grid.RowDefinitions>
+
+            <TextBlock Name="RefRawTxbl" Grid.Column="1" Grid.Row="1"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            
+            <ComboBox Name="RefTabModeCmBx" Grid.Column="2" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}" 
+               MaxDropDownHeight="300" Margin="0,0,0,0">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>
+
+            <TextBlock Name="RefTabXTxbl" Grid.Column="1" Grid.Row="3"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="RefTabXTxBx" Grid.Column="2" Grid.Row="3"
+            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+            <TextBlock Name="RefTabYTxbl" Grid.Column="1" Grid.Row="5"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="RefTabYTxBx" Grid.Column="2" Grid.Row="5"
+            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+            <Grid Name="ButtonsGrid" Grid.Column="1" Grid.ColumnSpan="2" Grid.Row="7" Grid.RowSpan="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1"
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3"
+                    IsCancel="True"
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</Window>

RawPhoto/OtherRefTabWD.xaml.vb

@@ -0,0 +1,108 @@
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib
+
+Public Class OtherRefTabWD
+   Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Dim m_RawPartPage As RawPartPageUC
+
+   Private m_sPosX As String = "0"
+   Private m_sPosY As String = "0"
+
+   Private m_dPrevOffsetX As Double = 0
+   Private m_dPrevOffsetY As Double = 0
+
+   Private m_SelIndex As Integer = 0
+
+   Sub New(Owner As Window, PosX As String, PosY As String, OffsetX As Double, OffsetY As Double, OtherRefMode As Integer)
+      Me.Owner = Owner
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+      m_sPosX = PosX
+      m_sPosY = PosY
+      m_dPrevOffsetX = OffsetX
+      m_dPrevOffsetY = OffsetY
+      m_SelIndex = OtherRefMode
+   End Sub
+
+   Private Sub OtherRrefTabWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' costruisco il riferimento alla pagina Raw
+      m_RawPartPage = m_MainWindow.m_RawPartPage
+      ' posiziono la finestra
+      Me.Top = Owner.Top + Owner.Height / 4 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 6 - Me.Width / 2
+      RefRawTxbl.Text = "Raw reference"
+      RefTabXTxbl.Text = "Position X"
+      RefTabYTxbl.Text = "Position Y"
+      RefTabModeCmBx.ItemsSource = m_RawPartPage.m_OtherRefTabList
+      RefTabModeCmBx.SelectedIndex = m_RawPartPage.m_OtherRefTabPos
+   End Sub
+
+   Private Sub OtherRrefTabWD_Load(sender As Object, e As EventArgs) Handles Me.Loaded
+      RefTabXTxBx.Text = m_sPosX
+      RefTabYTxBx.Text = m_sPosY
+   End Sub
+
+   Private Sub RefTabModeCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles RefTabModeCmBx.SelectionChanged
+      m_RawPartPage.m_OtherRefTabPos = RefTabModeCmBx.SelectedIndex
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABPOS, m_RawPartPage.m_OtherRefTabPos.ToString, m_MainWindow.GetIniFile())
+      m_RawPartPage.RefTabModeChange()
+   End Sub
+
+   Private Sub RefTabXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RefTabXTxBx.EgtClosed
+      Dim ptMin, ptMax As Point3d
+      If EgtGetTableArea(1, ptMin, ptMax) Then
+         Dim dX As Double = 0
+         StringToLen(RefTabXTxBx.Text, dX)
+         If Not (dX > 0 And dX < ptMax.x - ptMin.x) Then
+            If dX > 0 Then
+               dX = ptMax.x - ptMin.x
+            Else
+               dX = 0
+            End If
+            RefTabXTxBx.Text = LenToString(dX, 2)
+            ' errore, posizione fuori dalla tavola
+         End If
+         m_RawPartPage.m_OtherRefTabX = dX
+         m_RawPartPage.RefTabModeChange()
+      End If
+   End Sub
+
+   Private Sub RefTabYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RefTabYTxBx.EgtClosed
+      Dim ptMin, ptMax As Point3d
+      If EgtGetTableArea(1, ptMin, ptMax) Then
+         Dim dY As Double = 0
+         StringToLen(RefTabYTxBx.Text, dY)
+         If Not (dY > 0 And dY < ptMax.y - ptMin.y) Then
+            If dY > 0 Then
+               dY = ptMax.y - ptMin.y
+            Else
+               dY = 0
+            End If
+            RefTabYTxBx.Text = LenToString(dY, 2)
+            ' errore, posizione fuori dalla tavola
+         End If
+         m_RawPartPage.m_OtherRefTabY = dY
+         m_RawPartPage.RefTabModeChange()
+      End If
+   End Sub
+
+   Private Sub OkBtn_Click() Handles OkBtn.Click
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABX, DoubleToString(RefTabXTxBx.Text, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABY, DoubleToString(RefTabYTxBx.Text, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABPOS, m_RawPartPage.m_OtherRefTabPos.ToString, m_MainWindow.GetIniFile())
+      Me.Close()
+   End Sub
+
+   Private Sub ExitBtn_Click() Handles ExitBtn.Click
+      ' riposiziono l'origine
+      m_RawPartPage.m_OtherRefTabX = m_sPosX
+      m_RawPartPage.m_OtherRefTabY = m_sPosY
+      ' ripristino il valore della combobox
+      m_RawPartPage.m_OtherRefTabPos = m_SelIndex
+      m_RawPartPage.RefTabModeChange()
+   End Sub
+
+End Class

RawPhoto/RawPartPageUC.xaml

@@ -6,76 +6,76 @@
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Loaded="RawPartPage_Loaded" Initialized="RawPartPage_Initialized" Unloaded="RawPartPage_Unloaded">
-      
-   <!-- Definizione della RowPartPage -->
-   <Grid Name="RowPartPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
-      
-      <!-- Definizione della Grid superiore -->
-      <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="5*"/>
-            <ColumnDefinition Width="7*"/>
-         </Grid.ColumnDefinitions>
-         
-      </Grid>
-      
-      <!-- Definizione della Grid Laterale -->
-      <Grid Name="LeftButtonGrid" Grid.RowSpan="3">
-      
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1.5*"/>
-            <ColumnDefinition Width="1.5*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="4*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="1.*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
 
-         <RadioButton Name="OutlineBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
-               GroupName="DefinitionMethod_GrezzoUC"/>
-         <RadioButton Name="DamagedBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
-               Grid.Column="1" GroupName="DefinitionMethod_GrezzoUC"/>
+    <!-- Definizione della RowPartPage -->
+    <Grid Name="RowPartPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <!-- Definizione della Grid per definizione grezzo -->
-         <Grid Name="RawMeasureGrd" Grid.Row="1" Grid.ColumnSpan="2">
+        <!-- Definizione della Grid superiore -->
+        <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="7*"/>
+            </Grid.ColumnDefinitions>
+
+        </Grid>
+
+        <!-- Definizione della Grid Laterale -->
+        <Grid Name="LeftButtonGrid" Grid.RowSpan="3">
+
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1.5*"/>
+                <ColumnDefinition Width="1.5*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="4*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="1.*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
-            <ComboBox Name="RawModeCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
-               MaxDropDownHeight="300" Margin="6,0,6,0">
-               <ComboBox.ItemTemplate>
-                  <DataTemplate>
-                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                  </DataTemplate>
-               </ComboBox.ItemTemplate>
-            </ComboBox>
+            <RadioButton Name="OutlineBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
+               GroupName="DefinitionMethod_GrezzoUC"/>
+            <RadioButton Name="DamagedBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
+               Grid.Column="1" GroupName="DefinitionMethod_GrezzoUC"/>
 
-            <ComboBox Name="RawModeDamagedCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
+            <!-- Definizione della Grid per definizione grezzo -->
+            <Grid Name="RawMeasureGrd" Grid.Row="1" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                </Grid.RowDefinitions>
+
+                <ComboBox Name="RawModeCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
+               MaxDropDownHeight="300" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <ComboBox Name="RawModeDamagedCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
                MaxDropDownHeight="300" Margin="6,0,6,0">
                     <ComboBox.ItemTemplate>
                         <DataTemplate>
@@ -85,114 +85,123 @@
                 </ComboBox>
 
                 <TextBlock Name="LengthTxBl" Grid.Row="1" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="LengthTxBx" Grid.Column="1" Grid.Row="1" Margin="13,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="LengthTxBx" Grid.Column="1" Grid.Row="1" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="WidthTxBl" Grid.Row="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="2" Margin="13,0,6,0"
+                <TextBlock Name="WidthTxBl" Grid.Row="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="2" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="HeightTxBl" Grid.Row="3" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="3" Margin="13,0,6,0"
+                <TextBlock Name="HeightTxBl" Grid.Row="3" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="3" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="OffsetXTxBl" Grid.Row="4" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="OffsetXTxBx" Grid.Column="1" Grid.Row="4" Margin="13,0,6,0"
+                <TextBlock Name="OffsetXTxBl" Grid.Row="4" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsetXTxBx" Grid.Column="1" Grid.Row="4" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="OffsetYTxBl" Grid.Row="5" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="OffsetYTxBx" Grid.Column="1" Grid.Row="5" Margin="13,0,6,0"
+                <TextBlock Name="OffsetYTxBl" Grid.Row="5" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsetYTxBx" Grid.Column="1" Grid.Row="5" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="KerfTxBl" Grid.Row="6" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="KerfTxBx" Grid.Column="1" Grid.Row="6" Margin="13,0,6,0"
+                <TextBlock Name="KerfTxBl" Grid.Row="6" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="KerfTxBx" Grid.Column="1" Grid.Row="6" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         </Grid>
-                  
-         <!-- Definizione della Grid per il materiale -->
-         <GroupBox Name="MaterialGpBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+            </Grid>
 
-            <ComboBox Name="MaterialsCmbx" Style="{StaticResource OmagCut_ComboBox}"
+            <!-- Definizione della Grid per il materiale -->
+            <GroupBox Name="MaterialGpBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+
+                <ComboBox Name="MaterialsCmbx" Style="{StaticResource OmagCut_ComboBox}"
                MaxDropDownHeight="600">
-               <ComboBox.ItemTemplate>
-                  <DataTemplate>
-                     <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                  </DataTemplate>
-               </ComboBox.ItemTemplate>
-            </ComboBox>
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
 
-         </GroupBox>
+            </GroupBox>
 
-         <!-- Definizione della Grid per Punti -->
-         <GroupBox Name="PointsGpBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}" >
+            <!-- Definizione della Grid per Punti -->
+            <GroupBox Name="PointsGpBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}" >
 
-            <Grid >
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1.5*"/>
-                  <ColumnDefinition Width="1.5*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="1*"/>
-               </Grid.RowDefinitions>
+                <Grid >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1.5*"/>
+                        <ColumnDefinition Width="1.5*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                    </Grid.RowDefinitions>
 
-               <ToggleButton Name="AddBtn"
+                    <ToggleButton Name="AddBtn"
                   Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <ToggleButton Name="RemoveBtn" Grid.Column="1"
+                    <ToggleButton Name="RemoveBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <Button Name="CloseBtn" Grid.Row="1" Grid.ColumnSpan="2" 
+                    <Button Name="CloseBtn" Grid.Row="1" Grid.ColumnSpan="2" 
                   Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            </Grid>
-            
-         </GroupBox>
+                </Grid>
 
-         <!-- Definizione della Grid per Zona rovinata -->
-         <GroupBox Name="DamagedAreaGpBx" Grid.Row="4" Grid.ColumnSpan="2" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+            </GroupBox>
 
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
+            <!-- Definizione della Grid per Zona rovinata -->
+            <GroupBox Name="DamagedAreaGpBx" Grid.Row="4" Grid.ColumnSpan="2" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
 
-               <ToggleButton Name="NewBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <ToggleButton Name="DeleteBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            </Grid>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
 
-         </GroupBox>
+                    <ToggleButton Name="NewBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                    <ToggleButton Name="DeleteBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                </Grid>
 
-         <Button Name="ConfirmPhotoBtn" Grid.Row="4" Grid.ColumnSpan="2" Visibility="Hidden" 
+            </GroupBox>
+
+            <TextBlock Name="OtherRefTabTxBl" Grid.Row="5" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <CheckBox Name="OtherRefTabChBx" Grid.Row="5" Grid.Column="1" Style="{StaticResource OmagCut_CheckBox}"
+                    HorizontalAlignment="Right" Margin="0,0,6,0"/>
+
+            <Button Name="ConfirmPhotoBtn" Grid.Row="4" Grid.ColumnSpan="2" Visibility="Hidden" 
             Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-      </Grid>
-      
-      <!-- Definizione della Grid Inferiore per i Button V e X -->
-      <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="6*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
+        </Grid>
 
-         <Button Name="RawProbingBtn" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource RawProbeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+        <!-- Definizione della Grid Inferiore per i Button V e X -->
+        <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
 
-         <Button Name="BarCodeBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource BarCodeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+            <Button Name="RawProbingBtn" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource RawProbeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
 
-         <Button Name="SlabIdBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource SlabIdImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+            <Button Name="BarCodeBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource BarCodeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
 
-         <Button Name="OkBtn" Grid.Column="5" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-            <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
+            <Button Name="SlabIdBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource SlabIdImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="OtherRefTabBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource RefTabImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="OkBtn" Grid.Column="6" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
             VerticalAlignment="Center" />
-         </Button>
-         
-      </Grid>
-      
-   </Grid>
-   
+            </Button>
+
+        </Grid>
+
+    </Grid>
+
 </UserControl>

RawPhoto/RawPartPageUC.xaml.vb

@@ -1,6 +1,9 @@
 Imports System.Globalization
+Imports System.IO
+Imports System.Windows.Media.Animation
 Imports EgtUILib
 Imports EgtWPFLib
+Imports Microsoft.VisualBasic.Devices
 
 Public Class RawPartPageUC
 
@@ -78,6 +81,16 @@ Public Class RawPartPageUC
    ' Costante raggio cerchietto
    Private Const RAD_CIRCLE As Double = 30
 
+   ' Riferimento grezzo
+   Private m_bEnableOtherRefTab As Boolean = False
+   Private m_bOtherRefTab As Boolean
+   Public m_OtherRefTabX As Double = 0
+   Public m_OtherRefTabY As Double = 0
+   Public m_OtherRefTabList(3) As String
+   Public m_OtherRefTabPos As Integer = 0
+   Private m_nOtherRefTabLay As Integer = GDB_ID.NULL
+   Private m_OtherRefTabPoint As Point3d
+
    ' mostra la pagina delle lavorazioni
    Private m_SmartMachiningPage As Boolean = False
 
@@ -105,6 +118,13 @@ Public Class RawPartPageUC
       FROM_SAW = 7
    End Enum
 
+   Private Enum OTHERREFMODE As Integer
+      BL = 0
+      BR = 1
+      TR = 2
+      TL = 3
+   End Enum
+
    Private Sub RawPartPage_Initialized(sender As Object, e As EventArgs)
 
       'Creazione della Page UserControl e relative impostazioni
@@ -145,6 +165,13 @@ Public Class RawPartPageUC
          ReDim Preserve m_RawModeListEx(3)
       End If
       RawModeCmBx.ItemsSource = m_RawModeList
+
+      ' Creo la lista dei riferimenti tavola 
+      m_OtherRefTabList(OTHERREFMODE.BL) = "Bottom left"
+      m_OtherRefTabList(OTHERREFMODE.BR) = "Bottom right"
+      m_OtherRefTabList(OTHERREFMODE.TR) = "Top right"
+      m_OtherRefTabList(OTHERREFMODE.TL) = "Top left"
+
       ' lista per selezione RawModeDamaged
       m_RawModeDamagedList(0) = EgtMsg(MSG_RAWPARTPAGEUC + 2)    'Per Punti
       m_RawModeDamagedList(1) = EgtMsg(MSG_RAWPARTPAGEUC + 30)   'Da Laser
@@ -184,6 +211,8 @@ Public Class RawPartPageUC
       RemoveBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 15)        'Remove - Rimuovi
       CloseBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 31)         'Close - Chiudi
       ConfirmPhotoBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 24)  'Conferma
+
+      OtherRefTabTxBl.Text = "New Ref On Tab"
    End Sub
 
    Private Sub RawPartPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -277,6 +306,12 @@ Public Class RawPartPageUC
             Utility.SetBlockAndSlabNbr(sBlock, sSlabNbr)
          End If
       End If
+
+      ' Carico le info del riferimento alternativo della tavola
+      m_nOtherRefTabLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
+      LoadOtherRefTab()
+
       ' Assegno dati grezzo rettangolare ai textbox
       LengthTxBx.Text = LenToString(m_RawLength, 2)
       WidthTxBx.Text = LenToString(m_RawWidth, 2)
@@ -320,6 +355,36 @@ Public Class RawPartPageUC
       Next
    End Sub
 
+   Private Sub LoadOtherRefTab()
+      m_bEnableOtherRefTab = (GetPrivateProfileInt(S_RAWPART, K_ENABLEOTHERREFTAB, 0, m_MainWindow.GetIniFile()) <> 0)
+      If Not m_bEnableOtherRefTab Then
+         OtherRefTabBtn.Visibility = Visibility.Collapsed
+         OtherRefTabChBx.Visibility = Visibility.Collapsed
+         OtherRefTabTxBl.Visibility = Visibility.Collapsed
+         Return
+      End If
+      m_bOtherRefTab = (GetPrivateProfileInt(S_RAWPART, K_OTHERREFTAB, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_OtherRefTabX = GetPrivateProfileDouble(S_RAWPART, K_OTHERREFTABX, 0, m_MainWindow.GetIniFile())
+      m_OtherRefTabY = GetPrivateProfileDouble(S_RAWPART, K_OTHERREFTABY, 0, m_MainWindow.GetIniFile())
+      m_OtherRefTabPos = GetPrivateProfileInt(S_RAWPART, K_OTHERREFTABPOS, 0, m_MainWindow.GetIniFile())
+      ' RefTabPosCmbx.SelectedIndex = m_OtherRefTabPos
+      OtherRefTabChBx.IsChecked = m_bOtherRefTab
+      ' se riferimento tavola differente da quello atteso
+      If m_bOtherRefTab Then
+         ' dasibilito la modifica dei parametri di Offset
+         OffsetXTxBx.IsEnabled = False
+         OffsetYTxBx.IsEnabled = False
+         UpdateOffsetText()
+      End If
+
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nOtherRefTabLay)
+      ' Acquisisco punto da disegno
+      m_OtherRefTabPoint = New Point3d(m_ptTableMin.x + m_OtherRefTabX, m_ptTableMin.y + m_OtherRefTabY, m_ptTableMin.z + 0.15 + m_CurrentMachine.dAdditionalTable)
+      CreateOtherRefTab(m_nOtherRefTabLay, m_OtherRefTabPoint)
+      ' EgtDraw()
+   End Sub
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo
       If Not m_bActive Then Return
@@ -930,6 +995,13 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = True
+               OtherRefTabBtn.IsEnabled = True
+               ' disegno il riferimento
+               m_OtherRefTabPoint = New Point3d(m_ptTableMin.x + m_OtherRefTabX, m_ptTableMin.y + m_OtherRefTabY, m_ptTableMin.z + 0.15 + m_CurrentMachine.dAdditionalTable)
+               CreateOtherRefTab(m_nOtherRefTabLay, m_OtherRefTabPoint)
+            End If
          Case RAWMODE.BY_POINTS
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -946,6 +1018,12 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            ' disettivo la possibilità di modificare il riferimento 
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.FROM_LASER
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -962,6 +1040,11 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.DAMAGED
             RawModeCmBx.IsEnabled = False
             RawModeDamagedCmBx.Visibility = Visibility.Visible
@@ -980,6 +1063,11 @@ Public Class RawPartPageUC
             DamagedAreaGpBx.Visibility = Windows.Visibility.Visible
             ' Disattivo bottoni foto
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.FROM_PHOTO
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -992,6 +1080,11 @@ Public Class RawPartPageUC
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ' Visualizzo bottoni foto
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Visible
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.DAMAGED_BY_LASER
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Visible
@@ -1008,6 +1101,11 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.DAMAGED_BY_SAW
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Visible
@@ -1024,6 +1122,11 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.FROM_SAW
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -1040,11 +1143,26 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
       End Select
+      ' se abilitato nuovo riferimento del grezzo disabilito le text per offset
+      If OtherRefTabChBx.IsChecked Then
+         OffsetXTxBx.IsEnabled = False
+         OffsetYTxBx.IsEnabled = False
+      End If
    End Sub
 
    Private Sub OutlineBtn_Click(sender As Object, e As RoutedEventArgs) Handles OutlineBtn.Click
       If m_ActiveRawMode = RAWMODE.DAMAGED Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_SAW Then
+         If m_bEnableOtherRefTab Then
+            OtherRefTabTxBl.Visibility = Visibility.Visible
+            OtherRefTabBtn.Visibility = Visibility.Visible
+            OtherRefTabChBx.Visibility = Visibility.Visible
+         End If
          ' m_ActiveRawMode = RAWMODE.BY_POINTS
          m_ActiveRawMode = m_PrecActiveRawMode
          RawModeCmBx.SelectedIndex = m_ActiveRawMode
@@ -1055,6 +1173,12 @@ Public Class RawPartPageUC
    End Sub
 
    Private Sub DamagedBtn_Click(sender As Object, e As RoutedEventArgs) Handles DamagedBtn.Click
+      If m_bEnableOtherRefTab Then
+         OtherRefTabTxBl.Visibility = Visibility.Hidden
+         OtherRefTabBtn.Visibility = Visibility.Hidden
+         OtherRefTabChBx.Visibility = Visibility.Hidden
+         OtherRefTabBtn.IsEnabled = False
+      End If
       m_PrecActiveRawMode = m_ActiveRawMode
       If m_PrecActiveRawMode = RAWMODE.FROM_LASER Then
          m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER
@@ -1843,6 +1967,7 @@ Public Class RawPartPageUC
          WidthTxBx.Text = LenToString(m_RawWidth, 2)
          m_CurrProjPage.SetErrorMessage(EgtMsg(MSG_RAWPARTPAGEUC + 17) & " " & LenToString(dMaxWidth, 2))   'Massima larghezza =
       End If
+      RefTabModeChange()
    End Sub
 
    Private Sub HeightTxBx_EgtClosed(sender As Object, e As EventArgs) Handles HeightTxBx.EgtClosed
@@ -1872,6 +1997,7 @@ Public Class RawPartPageUC
          HeightTxBx.Text = LenToString(m_RawHeight, 3)
          m_CurrProjPage.SetErrorMessage(EgtMsg(MSG_RAWPARTPAGEUC + 18)) 'Non sono ammessi spessori negativi
       End If
+      RefTabModeChange()
    End Sub
 
    Private Sub OffsetXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsetXTxBx.EgtClosed
@@ -1918,6 +2044,109 @@ Public Class RawPartPageUC
       End If
    End Sub
 
+#Region "OTHERREFTAB"
+
+   Private Sub OtherRefTabChBx_Click(sender As Object, e As EventArgs) Handles OtherRefTabChBx.Click
+      If OtherRefTabChBx.IsChecked Then
+         m_bOtherRefTab = True
+         MoveRawToOtherRefTab()
+      Else
+         m_bOtherRefTab = False
+         'MoveRawToMaiRefTab()
+      End If
+      UpdateOffsetText()
+      RawModeView()
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTAB, If(m_bOtherRefTab, "1", "0"), m_MainWindow.GetIniFile())
+   End Sub
+
+   Public Sub RefTabModeChange()
+      If Not m_bOtherRefTab Then Return
+      MoveRawToMaiRefTab()
+      MoveRawToOtherRefTab()
+      UpdateRefTabDraw()
+      UpdateOffsetText()
+   End Sub
+
+   Public Sub UpdateRefTabDraw()
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nOtherRefTabLay)
+      ' Acquisisco punto da disegno
+      m_OtherRefTabPoint = New Point3d(m_ptTableMin.x + m_OtherRefTabX, m_ptTableMin.y + m_OtherRefTabY, m_ptTableMin.z + 0.15)
+      CreateOtherRefTab(m_nOtherRefTabLay, m_OtherRefTabPoint)
+      EgtDraw()
+   End Sub
+
+   Private Sub UpdateOffsetText()
+      Dim ptRawMin, ptRawMax As Point3d
+      Dim dInvertKerf As Double = 1
+      If GetRawBox(ptRawMin, ptRawMax) Then
+         ' kerf
+         EgtGetInfo(EgtGetFirstRawPart(), KEY_KERF, m_RawKerf)
+         ' verifico se il kerf è negativo
+         EgtGetInfo(EgtGetFirstRawPart(), KEY_INVERT_KERF, dInvertKerf)
+         ' aggiorno dati grezzo
+         If dInvertKerf < 0 Then
+            m_RawOffsX = ptRawMin.x - m_ptTableMin.x
+            m_RawOffsY = ptRawMin.y - m_ptTableMin.y
+         Else
+            m_RawOffsX = ptRawMin.x - m_ptTableMin.x + m_RawKerf * dInvertKerf
+            m_RawOffsY = ptRawMin.y - m_ptTableMin.y + m_RawKerf * dInvertKerf
+         End If
+         OffsetXTxBx.Text = LenToString(m_RawOffsX, 2)
+         OffsetYTxBx.Text = LenToString(m_RawOffsY, 2)
+      End If
+   End Sub
+
+   Private Sub MoveRawToOtherRefTab()
+      Dim dKerf As Double = 0
+      StringToLen(KerfTxBx.Text, dKerf)
+      Select Case m_OtherRefTabPos
+         Case OTHERREFMODE.BL
+            m_RawOffsX = m_OtherRefTabX + If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY + If((dKerf < 0), -dKerf, dKerf)
+         Case OTHERREFMODE.BR
+            m_RawOffsX = m_OtherRefTabX - m_RawLength - If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY + If((dKerf < 0), -dKerf, dKerf)
+         Case OTHERREFMODE.TR
+            m_RawOffsX = m_OtherRefTabX - m_RawLength - If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY - m_RawWidth - If((dKerf < 0), -dKerf, dKerf)
+         Case OTHERREFMODE.TL
+            m_RawOffsX = m_OtherRefTabX + If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY - m_RawWidth - If((dKerf < 0), -dKerf, dKerf)
+         Case Else
+      End Select
+      UpdateRawPart()
+   End Sub
+
+   Private Sub MoveRawToMaiRefTab()
+      Dim dKerf As Double = 0
+      StringToLen(KerfTxBx.Text, dKerf)
+      Select Case m_OtherRefTabPos
+         Case OTHERREFMODE.BR
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case OTHERREFMODE.BL
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case OTHERREFMODE.TL
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case OTHERREFMODE.TR
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case Else
+      End Select
+      UpdateRawPart()
+   End Sub
+
+   Private Sub OtherRefTabBtn_Click(sender As Object, e As EventArgs) Handles OtherRefTabBtn.Click
+      ' apro la finestra per gestire il riferimento
+      Dim OthWD As New OtherRefTabWD(m_MainWindow, LenToString(m_OtherRefTabX, 2), LenToString(m_OtherRefTabY, 2), m_RawOffsX, m_RawOffsY, m_OtherRefTabPos)
+      OthWD.ShowDialog()
+   End Sub
+
+#End Region    ' OtherRefTab
+
    Private Sub KerfTxBx_EgtClosed(sender As Object, e As EventArgs) Handles KerfTxBx.EgtClosed
       Dim dKerf As Double
       If Not StringToLen(KerfTxBx.Text, dKerf) Then
@@ -1960,6 +2189,8 @@ Public Class RawPartPageUC
          Else
             CreateRawFromPhotoContour()
          End If
+         ' Forzo il riposizionamento del grezzo
+         RefTabModeChange()
          ' Ridisegno
          EgtDraw()
       ElseIf dKerf >= dMinKerf And dKerf < 0 Then
@@ -2022,6 +2253,8 @@ Public Class RawPartPageUC
          Else
             CreateRawFromPhotoContour()
          End If
+         ' Forzo il riposizionamento del grezzo
+         RefTabModeChange()
          ' Ridisegno
          EgtDraw()
       ElseIf dKerf < dMinKerf Then
@@ -2052,6 +2285,18 @@ Public Class RawPartPageUC
       ' Recupero origine tavola rispetto allo 0 macchina
       Dim TableRef As Point3d
       EgtGetTableRef(1, TableRef)
+      ' imposto modo automatico
+      Select Case m_MainWindow.m_CNCommunication.m_nNCType
+         Case 1, 2
+            ' in attesa di verifica 
+         Case 3
+            Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(0)
+            EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+         Case 4
+            ' FANUC - Manual:7, Edit:1
+            Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(7)
+            EgtOutLog("Impostata modalità manuale: esito " & nResult.ToString)
+      End Select
       ' Recupero file LUA
       EgtLuaExecFile(m_CurrentMachine.sMachDir() & "\DirectCmd\RawProbing.lua")
       ' Imposto parametri
@@ -2089,6 +2334,11 @@ Public Class RawPartPageUC
       End If
       m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
       EgtOutLog("RawProbing : sent NC program")
+      ' Se fanuc passo in modalità AUTO e attivo
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(0)
+         EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+      End If
       ' Aspetto e lo avvio
       System.Threading.Thread.Sleep(300)
       m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
@@ -2154,6 +2404,10 @@ Public Class RawPartPageUC
                Else
                   RawThickness *= ONEMM / 1000
                End If
+               ' Se fanuc il dato è in mm (NON MICRON)
+               If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+                  RawThickness *= 1000
+               End If
                ' Sottraggo eventuale spessore sovratavola
                RawThickness -= m_CurrentMachine.dAdditionalTable
                ' Imposto spessore misurato come altezza grezzo
@@ -2246,6 +2500,7 @@ Public Class RawPartPageUC
    Private Sub RawPartPage_Unloaded(sender As Object, e As RoutedEventArgs)
       ' Rimuovo layer temporaneo per crocette
       EgtErase(m_nTempLay)
+      EgtErase(m_nOtherRefTabLay)
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
@@ -2561,4 +2816,44 @@ Public Class RawPartPageUC
       Return True
    End Function
 
+   Private Function CreateOtherRefTab(nLayerId As Integer, ptP As Point3d) As Boolean
+      EgtEmptyGroup(m_nOtherRefTabLay)
+      If Not m_bOtherRefTab Or Not OtherRefTabChBx.IsEnabled Then
+         EgtDraw()
+         Return False
+      End If
+
+      If File.Exists(m_MainWindow.GetResourcesDir() & "\" & "RefTabBL.nge") Then
+         ' Aggiungo disegno staffa fermo pezzo
+         EgtInsertFile(m_MainWindow.GetResourcesDir() & "\" & "RefTabBL.nge")
+         Dim nLastPart As Integer = EgtGetLastPart()
+         Dim Lay As Integer = EgtGetFirstInGroup(nLastPart)
+         Dim Ent As Integer = EgtGetFirstInGroup(Lay)
+         While Ent <> -1
+            Dim NextEnt As Integer = EgtGetNext(Ent)
+            EgtRelocate(Ent, nLayerId)
+            EgtMove(Ent, ptP - Point3d.ORIG)
+            EgtRotate(Ent, ptP, Vector3d.Z_AX, 90 * m_OtherRefTabPos)
+            Ent = NextEnt
+         End While
+         EgtErase(nLastPart)
+      Else
+         ' Aggiungo crocette
+         ptP += New Vector3d(0, 0, 0.15)
+         Dim vtCrossX As New Vector3d(100, 0, 0)
+         Dim vtCrossY As New Vector3d(0, 100, 0)
+         Dim vtCrossZ As New Vector3d(0, 0, 100)
+         Dim nCrossId1 = EgtCreateLine(nLayerId, ptP, ptP + vtCrossX)
+         EgtSetColor(nCrossId1, New Color3d(245, 0, 0))
+         Dim nCrossId2 = EgtCreateLine(nLayerId, ptP, ptP + vtCrossY)
+         EgtSetColor(nCrossId2, New Color3d(0, 245, 0))
+         Dim nCrossId3 = EgtCreateLine(nLayerId, ptP, ptP + vtCrossZ)
+         EgtSetColor(nCrossId3, New Color3d(0, 0, 245))
+      End If
+
+      EgtDraw()
+      'EgtSaveFile("C:\EgtData\OmagCUT\Temp\MyTest.nge", NGE.BIN)
+      Return True
+   End Function
+
 End Class

Simulation/SimulationPageUC.xaml.vb

@@ -567,6 +567,56 @@ Public Class SimulationPageUC
    End Sub
 
    Private Sub GenerateXPIUC_Click(sender As Object, e As RoutedEventArgs)
+      ' se il bottone Shift è premuto apro il file CadCut1 nel programma NotePad
+      Dim IsPressedShiftKey As Boolean = False
+      If Keyboard.Modifiers And ModifierKeys.Shift Then
+         IsPressedShiftKey = True
+      End If
+
+      ' eventualmente fermo la simulazione
+      m_nStatus = MCH_SIM_ST.UI_STOP
+      m_bPlay = False
+      PlayPauseBtn_Click(Nothing, Nothing)
+
+      ' Se nella pagina di tagli diretti
+      If m_MainWindow.DirectCutBtn.IsChecked And Not m_MainWindow.CadCutBtn.IsChecked Then
+         ' Genero file CNC (lancio anche se errore in precedenza)
+         Dim sCncPathDirect As String = m_MainWindow.GetCncDir() & "\DirectCut" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+         Dim bOkDirect As Boolean = EgtGenerate(sCncPathDirect, "OmagCut ver." & m_MainWindow.GetVersion())
+
+         ' Costringo ad aggiornare UI
+         UpdateUI()
+         ' Ripristino come fase corrente quella iniziale
+         EgtSetCurrPhase(1)
+         If bOkDirect Then
+            m_CurrProjPage.SetInfoMessage("Genarato file " & "DirectCut" & m_MainWindow.m_CurrentMachine.sIsoFileExt)
+         Else
+            m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
+         End If
+         ' procedo all'apertura del file CadCut1 apenna generato (solo se generazione corretta)
+         If bOkDirect And IsPressedShiftKey Then
+            Try
+               Process.Start("Notepad.exe", sCncPathDirect)
+            Catch ex As Exception
+               EgtOutLog(ex.ToString)
+            End Try
+         End If
+         ' ricarico la pagina di simulazione
+         EgtSetCurrPhase(1)
+         ' nascondo i pezzi in parcheggio
+         HideParkedParts(True)
+         ' Avvio ambiente di simulazione
+         EgtSimInit()
+         EgtSimStart()
+         ' Imposto stato corrente
+         SetStatus(MCH_SIM_ST.UI_STOP)
+         m_bPlay = True
+         ' Costringo ad aggiornare UI
+         UpdateUI()
+         ' esco 
+         Return
+      End If
+
       Dim bOk As Boolean = True
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Elimino eventuale attrezzaggio da OmagOFFICE
@@ -669,6 +719,26 @@ Public Class SimulationPageUC
       Else
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
       End If
+      ' procedo all'apertura del file CadCut1 apenna generato (solo se generazione corretta)
+      If bOk And IsPressedShiftKey Then
+         Try
+            Process.Start("Notepad.exe", sCncPath)
+         Catch ex As Exception
+            EgtOutLog(ex.ToString)
+         End Try
+      End If
+      ' ricarico la pagina di simulazione
+      EgtSetCurrPhase(1)
+      ' nascondo i pezzi in parcheggio
+      HideParkedParts(True)
+      ' Avvio ambiente di simulazione
+      EgtSimInit()
+      EgtSimStart()
+      ' Imposto stato corrente
+      SetStatus(MCH_SIM_ST.UI_STOP)
+      m_bPlay = True
+      ' Costringo ad aggiornare UI
+      UpdateUI()
    End Sub
 
    Private Function ProcessEvents(nProg As Integer, nPause As Integer) As Integer

Utility/Utility.vb

@@ -1,4 +1,5 @@
 Imports System.Globalization
+Imports System.Diagnostics
 Imports System.Collections.ObjectModel
 Imports System.Text.RegularExpressions
 Imports EgtWPFLib
@@ -17,8 +18,25 @@ Module Utility
    End Function
 
 
-   '--------------------------------------------------------------------------------------------------
-   Friend Sub UpdateUI()
+    Friend StopWatch As Stopwatch
+
+   Friend Sub TimeSpanInit()
+      StopWatch = New Stopwatch
+      StopWatch.Start()
+   End Sub
+
+   Friend Function TimeSpanEnd()
+        Dim sTime As String = ""
+        If Not IsNothing(StopWatch) Then
+            StopWatch.Stop()
+            Dim ts As TimeSpan = StopWatch.Elapsed
+            sTime = String.Format("{0:00}:{1:00}:{2:00}.{3:000}", ts.Hours, ts.Minutes, ts.Seconds, ts.Milliseconds)
+        End If
+        Return sTime
+    End Function
+
+    '--------------------------------------------------------------------------------------------------
+    Friend Sub UpdateUI()
       ' Costringo ad aggiornare UI
       Dim nDummy As Integer
       Application.Current.Dispatcher.Invoke(Windows.Threading.DispatcherPriority.Background, _
@@ -187,10 +205,10 @@ Module Utility
    End Function
 
    ' conerte il dato (in mm) in stringa nell'unità corrente
-   Friend Function LenToString(dVal As Double, nNumDec As Integer) As String
+   Friend Function LenToString(dVal As Double, nNumDec As Integer, Optional ByVal bForceToDecimal As Boolean = False) As String
       Dim sVal As String = DoubleToString(EgtToUiUnits(dVal), nNumDec)
       ' se richiesta scrittura in frazione (solo se unità corrente INCHES)
-      If nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM() Then
+      If (nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM()) And Not bForceToDecimal Then
          ' conevrto il dato corrente in decimale
          Dim dCurrVal As Double = dVal
          StringToDouble(sVal, dCurrVal)
@@ -199,10 +217,10 @@ Module Utility
       Return sVal
    End Function
 
-   Friend Function StringToLen(sVal As String, ByRef dVal As Double) As Boolean
+   Friend Function StringToLen(sVal As String, ByRef dVal As Double, Optional ByVal bForceToDecimal As Boolean = False) As Boolean
       If String.IsNullOrEmpty(sVal) Then Return False
 
-      If nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM() Then
+      If (nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM()) And Not bForceToDecimal Then
          Dim sValSource As String = sVal
          ' conevrto la stringa in formato decimale (sempre in stringa)
          StringFractionToStringDecimal(sValSource, sVal)

VeinMatching/VeinMatchingWindow.xaml.vb

@@ -4,6 +4,7 @@ Imports System.Collections.ObjectModel
 Imports System.Runtime.InteropServices
 Imports EgtUILib
 Imports EgtWPFLib
+Imports OmagCUT.VeinMatchingWindow
 
 Public Class VeinMatchingWindow
 
@@ -19,6 +20,11 @@ Public Class VeinMatchingWindow
    Private m_nIdToSel As Integer = GDB_ID.NULL
    Private m_nIdToDesel As Integer = GDB_ID.NULL
 
+   Enum ALETTE
+      F = 2
+      A = 1
+   End Enum
+
    Private Sub Window_Initialized(sender As Object, e As EventArgs)
       ' Assegnazione scena all'host e posizionamento nella PlacePageGrid
       VeinMatchingSceneHost.Child = VeinMatchingScene
@@ -267,7 +273,7 @@ Friend Module VeinMatching
       Dim nRegId As Integer = EgtGetFirstInGroup(nRegLayId)
       While nRegId <> GDB_ID.NULL
          If EgtGetType(nRegId) = GDB_TY.SRF_FRGN Then
-               Exit While
+            Exit While
          End If
          nRegId = EgtGetNext(nRegId)
       End While
@@ -364,19 +370,21 @@ Friend Module VeinMatching
       ' Imposto il contesto del progetto
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Riattivo il gruppo di lavoro
-      EgtSetCurrMachGroup( EgtGetFirstMachGroup())
+      EgtSetCurrMachGroup(EgtGetFirstMachGroup())
       ' Verifico quali pezzi sono nel grezzo, per dichiararlo al VM
-      nId = EgtGetFirstPartInRawPart( CamAuto.GetCurrentRaw())
+      nId = EgtGetFirstPartInRawPart(CamAuto.GetCurrentRaw())
       While nId <> GDB_ID.NULL
          ' Dichiaro pezzo nel grezzo per VM
-         VeinMatching.OnInsertPartInRaw( nId)
+         VeinMatching.OnInsertPartInRaw(nId)
          ' Passo al pezzo successivo
          nId = EgtGetNextPartInRawPart(nId)
       End While
       ' Ripristino visualizzazione di eventuali pezzi in parcheggio
       ShowParkedParts()
       ' Ripristino il contesto corrente
-      EgtSetCurrentContext( nCurrCtx)
+      EgtSetCurrentContext(nCurrCtx)
+
+      ' EgtSaveFile("C:\EgtData\OmagCUT\Temp\MyVeinMatch.nge", NGE.TEXT)
       Return True
    End Function
 
@@ -422,11 +430,11 @@ Friend Module VeinMatching
       nCurrId = EgtGetFirstNameInGroup(nVeinId2, NAME_PREVIEW)
       EgtSetStatus(nCurrId, GDB_ST.OFF)
       ' Se esiste OutLoop.orig OutLoop -> OutLoop.mach e OutLoop.orig -> OutLoop
-      Dim nOutLoopOrig As Integer = EgtGetFirstNameInGroup( nVeinId2, NAME_OUTLOOP & ".orig")
+      Dim nOutLoopOrig As Integer = EgtGetFirstNameInGroup(nVeinId2, NAME_OUTLOOP & ".orig")
       If nOutLoopOrig <> GDB_ID.NULL Then
-         Dim nOutLoop As Integer = EgtGetFirstNameInGroup( nVeinId2, NAME_OUTLOOP)
-         EgtSetName( nOutLoop, NAME_OUTLOOP & ".mach")
-         EgtSetName( nOutLoopOrig, NAME_OUTLOOP)
+         Dim nOutLoop As Integer = EgtGetFirstNameInGroup(nVeinId2, NAME_OUTLOOP)
+         EgtSetName(nOutLoop, NAME_OUTLOOP & ".mach")
+         EgtSetName(nOutLoopOrig, NAME_OUTLOOP)
       End If
       ' Se necessario, ripristino il contesto originale
       If nCurrCtx > 0 Then EgtSetCurrentContext(nCurrCtx)
@@ -555,8 +563,8 @@ Friend Module VeinMatching
 
          ' Se richiesto, eseguo deselezione
          If bDeselect Then EgtDeselectObj(nId)
-         End If
-         EgtDraw()
+      End If
+      EgtDraw()
       EgtSetCurrentContext(nMainCtx)
       Return True
    End Function
@@ -1039,37 +1047,44 @@ Friend Module VeinMatching
    End Function
 
    Friend Function MoveAlettaSolid(ByRef Item As Aletta, ByRef ThicknessRaw As Double) As Boolean
-
+      ' A: alzatina, F: frontalino
       Dim nType As Integer
       If Not EgtGetInfo(Item.IdSideRef, "AF", nType) Then Return False
 
-      Dim ptSRef, ptERef, ptE As Point3d
+      Dim ptSRef, ptERef, ptS, ptE As Point3d
+      ' Piano cucina
       If Not EgtStartPoint(Item.IdSideRef, GDB_ID.ROOT, ptSRef) Then Return False
       If Not EgtEndPoint(Item.IdSideRef, GDB_ID.ROOT, ptERef) Then Return False
+      ' AlzFront
+      If Not EgtStartPoint(Item.SideId, GDB_ID.ROOT, ptS) Then Return False
       If Not EgtEndPoint(Item.SideId, GDB_ID.ROOT, ptE) Then Return False
 
+      ' vettore lato cucina
+      Dim vtRotRef As Vector3d = ptERef - ptSRef
+      ' vettore lato AlzFront
+      Dim vtRot As Vector3d = ptE - ptS
+
       ' ruoto il solido intorno al lato di riferimento
-      Dim vtRot As Vector3d = ptERef - ptSRef
-      If nType = 1 Then
-         EgtRotate(Item.PartId, ptE, vtRot, -90, GDB_RT.GLOB)
-      ElseIf nType = 2 Then
+      If nType = ALETTE.A Then
          EgtRotate(Item.PartId, ptE, vtRot, 90, GDB_RT.GLOB)
+      ElseIf nType = ALETTE.F Then
+         EgtRotate(Item.PartId, ptE, vtRot, -90, GDB_RT.GLOB)
       End If
 
       ' punto di riferimento per la traslazione sul solido
       Dim ptSolid As Point3d
-      If nType = 1 Then
+      If nType = ALETTE.A Then
          ' cerco id della curva che definisce la front face
          Dim nSolidGrp As Integer = EgtGetFirstNameInGroup(Item.PartId, NAME_VM_SOLID)
          Dim nFrontCrvId As Integer = EgtGetFirstInGroup(nSolidGrp)
-         EgtStartPoint(nFrontCrvId, ptSolid)
-      ElseIf nType = 2 Then
-         EgtStartPoint(Item.SideId, ptSolid)
+         EgtStartPoint(nFrontCrvId, GDB_ID.ROOT, ptSolid)
+      ElseIf nType = ALETTE.F Then
+         EgtStartPoint(Item.SideId, GDB_ID.ROOT, ptSolid)
       End If
 
-      Dim ItemFrame As New Frame3d
-      If Not EgtGetGroupGlobFrame(Item.PartId, ItemFrame) Then Return False
-      ptSolid.ToGlob(ItemFrame)
+      ' Dim ItemFrame As New Frame3d
+      ' If Not EgtGetGroupGlobFrame(Item.PartId, ItemFrame) Then Return False
+      ' ptSolid.ToGlob(ItemFrame)
 
       'punto di riferimento per la traslazione sul piano cucina
       Dim ptKitchen As Point3d = ptERef
@@ -1077,6 +1092,16 @@ Friend Module VeinMatching
       Dim vtMove As Vector3d = ptKitchen - ptSolid
       EgtMove(Item.PartId, vtMove, GDB_RT.GLOB)
 
+      ' eventualmente ruoto per allineare l'alzatina al piano cucina
+      Dim dLRef, dAngVRef, dAngHRef As Double
+      vtRotRef.ToSpherical(dLRef, dAngVRef, dAngHRef)
+      Dim dL, dAngV, dAngH As Double
+      vtRot.Rotate(Vector3d.Z_AX, 180)
+      vtRot.ToSpherical(dL, dAngV, dAngH)
+      Dim dDelta As Double = dAngHRef - dAngH
+      If Math.Abs(dDelta) < EPS_ANG_SMALL Then Return True
+      EgtRotate(Item.PartId, ptKitchen, Vector3d.Z_AX, dDelta, GDB_RT.GLOB)
+
       Return True
    End Function
 
@@ -1206,7 +1231,7 @@ Friend Module VeinMatching
       ' Se necessario, cambio contesto
       If m_nVeinCtx <> nCurrCtx Then
          If EgtSetCurrentContext(m_nVeinCtx) Then
-            Return If( nCurrCtx > 0, nCurrCtx, -2)
+            Return If(nCurrCtx > 0, nCurrCtx, -2)
          Else
             Return 0
          End If
@@ -1268,7 +1293,7 @@ Friend Module VeinMatching
       While nId <> GDB_ID.NULL
          Dim nOriId As Integer
          If EgtGetInfo(nId, KEY_ORI_ID, nOriId) AndAlso nOriId = nPartId Then
-               Exit While
+            Exit While
          End If
          nId = EgtGetNextPart(nId)
       End While