Avvio lo scatto automatico per OmagPHOTO

- in VerifyOutOfStrokes prima di controllare il valore dell'asse C si cerca di riportarlo nel range ammesso (modulo 360 gradi).

CAM/CamAuto.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Forms.Integration
+Imports EgtUILib
 
 Friend Module CamAuto
 
@@ -29,7 +30,7 @@ Friend Module CamAuto
       Return bOk
    End Function
 
-   Friend Function AddWaterJetMachining( nOperId As Integer, ByRef nWarn As Integer) As Boolean
+   Friend Function AddWaterJetMachining(nOperId As Integer, ByRef nWarn As Integer) As Boolean
       EgtLuaCreateGlobTable("CAM")
       SetLuaStandardCamParams()
       EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
@@ -93,7 +94,7 @@ Friend Module CamAuto
       If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS Then
          ' Reinserisco tutte le lavorazioni piane
          AddMachinings(GDB_ID.NULL, nWarn)
-      ' Se altrimenti progetto con cornici
+         ' Se altrimenti progetto con cornici
       ElseIf nPrjType = CurrentProjectPageUC.PRJ_TYPE.FRAMES Then
          ' Reinserisco tutte le lavorazioni delle cornici
          AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
@@ -101,6 +102,98 @@ Friend Module CamAuto
       Return True
    End Function
 
+   Friend Function ResetAllSplitCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllStartCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllBRidges() As Boolean
+      Dim bOk As Boolean = True
+      Dim nMachGroup As Integer = EgtGetCurrMachGroup()
+      Dim nBridgesGroup As Integer = EgtGetFirstNameInGroup(nMachGroup, "Bridges")
+      bOk = EgtErase(nBridgesGroup)
+      Return bOk
+   End Function
+
+   Friend Function ResetAllRawPart() As Boolean
+      Dim nPhase As Integer = 1
+      Dim nOtherRaw As Integer = EgtGetFirstRawPart()
+      While nOtherRaw <> GDB_ID.NULL
+         ' se il pezzo non appartiene alla prima fase allora viene eliminato
+         If Not EgtVerifyRawPartPhase(nOtherRaw, nPhase) Then
+            Dim NextRaw As Integer = EgtGetNextRawPart(nOtherRaw)
+            EgtRemoveRawPart(nOtherRaw)
+            nOtherRaw = NextRaw
+         Else
+            nOtherRaw = EgtGetNextRawPart(nOtherRaw)
+         End If
+      End While
+      Return True
+   End Function
+
+   ' verifico che il contorno passato non sia stato separato
+   Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer)
+      Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+      While nIdMy <> GDB_ID.NULL
+         Dim nValInfo As Integer = 1
+         If EgtGetInfo(nIdMy, INFO_JOINENTITY, nValInfo) Then
+            If nValInfo = 0 Then Return False
+         End If
+         EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return True
+   End Function
+
    Friend Function RemoveFinalEmptyPhases() As Boolean
       Dim nOpeId As Integer = EgtGetLastOperation()
       While nOpeId <> GDB_ID.NULL

CadCuts/CadCutPageUC.xaml.vb

@@ -108,6 +108,8 @@ Public Class CadCutPageUC
    Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
       m_MainWindow.TestOff()
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Se macchina fotografica collegata, faccio una foto
@@ -142,6 +144,8 @@ Public Class CadCutPageUC
    Private Sub RawPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RawPartBtn.Click
       m_MainWindow.TestOff()
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_RawPartPage)
@@ -168,6 +172,8 @@ Public Class CadCutPageUC
    Private Sub DrawBtn_Click(sender As Object, e As RoutedEventArgs) Handles DrawBtn.Click
       m_MainWindow.TestOff()
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
@@ -176,6 +182,8 @@ Public Class CadCutPageUC
    Private Sub ImportBtn_Click(sender As Object, e As RoutedEventArgs) Handles ImportBtn.Click
       m_MainWindow.TestOff()
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_ImportPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Import
@@ -198,6 +206,8 @@ Public Class CadCutPageUC
 
    Private Sub SplitBtn_Click(sender As Object, e As RoutedEventArgs) Handles SplitBtn.Click
       m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtDeselectObj(m_NestPage.m_CurrSelectedCurv)
       m_ProjectMgr.TestBtn.IsChecked = False

CadCuts/EditValueWD.xaml

@@ -27,6 +27,14 @@
          <EgtWPFLib:EgtTextBox Name="ValueTxBx" Grid.Column="1" Grid.Row="1"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
+         <ComboBox Name="ValueCmBx" Grid.Column="1" Grid.Row="1">
+            <ComboBox.ItemTemplate>
+               <DataTemplate>
+                  <TextBlock Text="{Binding}" FontSize="20" />
+               </DataTemplate>
+            </ComboBox.ItemTemplate>
+         </ComboBox>
+
          <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="0.5*"/>

CadCuts/EditValueWD.xaml.vb

@@ -1,6 +1,7 @@
 Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib
+Imports System.Collections.ObjectModel
 
 Public Class EditValueWD
 
@@ -8,29 +9,77 @@ Public Class EditValueWD
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private m_sMsg As String = "Value"
    Private m_sValue As String = ""
+   Private m_sList As ObservableCollection(Of String)
+   Private m_IsText As Boolean = True
 
+   ' avvia la visualizzazione della textbox
    Sub New(Owner As Window, Optional sMsg As String = "")
       Me.Owner = Owner
       m_sMsg = sMsg
+      m_IsText = True
       InitializeComponent()
    End Sub
 
-   Friend Function SetVal( dVal As Double) As Boolean
-      m_sValue = DoubleToString( dVal, 3)
+   Friend Function SetVal(dVal As Double, Optional ByVal bLen As Boolean = False) As Boolean
+      If bLen Then
+         m_sValue = LenToString(dVal, 3)
+      Else
+         m_sValue = DoubleToString(dVal, 3)
+      End If
       ValueTxBx.Text = m_sValue
-      Return true
+      Return True
    End Function
 
-   Friend Function GetVal() As Double
+   ' avvia la visualizzazione della combobox
+   Sub New(Owner As Window, sList As ObservableCollection(Of String), Optional sMsg As String = "")
+      Me.Owner = Owner
+      m_sMsg = sMsg
+      m_IsText = False
+      InitializeComponent()
+      m_sList = sList
+      SetComboBox(m_sList)
+   End Sub
+
+   Friend Function GetVal(Optional ByVal bLen As Boolean = False) As Double
       Dim dVal As Double = 0
-      StringToDouble( m_sValue, dVal)
+      If bLen Then
+         StringToLen(m_sValue, dVal)
+      Else
+         StringToDouble(m_sValue, dVal)
+      End If
       Return dVal
    End Function
 
+   Friend Function SetComboBox(sList As ObservableCollection(Of String)) As Boolean
+      ValueCmBx.ItemsSource = sList
+      Return True
+   End Function
+
+   Friend Function SetItemComboBox(sItem As String) As Boolean
+      For Each MyItem As String In ValueCmBx.ItemsSource
+         If MyItem = sItem Then
+            ValueCmBx.SelectedItem = MyItem
+         End If
+      Next
+      Return True
+   End Function
+
+   Friend Function GetItemComboBox() As String
+      Dim sVal As String = ValueCmBx.SelectedItem
+      Return sVal
+   End Function
+
    Private Sub EditValueWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
       ValueTxbl.Text = m_sMsg
+      If m_IsText Then
+         ValueCmBx.Visibility = Visibility.Collapsed
+         ValueTxBx.Visibility = Visibility.Visible
+      Else
+         ValueCmBx.Visibility = Visibility.Visible
+         ValueTxBx.Visibility = Visibility.Collapsed
+      End If
    End Sub
 
    Private Sub EditValueWD_Rendered(sender As Object, e As EventArgs) Handles Me.ContentRendered

CadCuts/MoveRawPartPage.xaml

@@ -7,158 +7,167 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
 
-   <!-- Definizione della SplitPage -->
-   <Grid Name="SplitPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
+    <!-- Definizione della SplitPage -->
+    <Grid Name="SplitPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-      <!--Upper button grid-->
-      <Grid Grid.Column="1">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="4*"/>
-            <ColumnDefinition Width="8*"/>
-         </Grid.ColumnDefinitions>
-
-         <!--Griglia per oscurare i bottoni della pagina sottostante-->
-         <Grid Background="{DynamicResource OmagCut_Gray}">
+        <!--Upper button grid-->
+        <Grid Grid.Column="1">
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="8*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            <!--Griglia per oscurare i bottoni della pagina sottostante-->
+            <Grid Background="{DynamicResource OmagCut_Gray}">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
+                        <Image.RenderTransform>
+                            <TransformGroup>
+                                <RotateTransform Angle="180"/>
+                            </TransformGroup>
+                        </Image.RenderTransform>
+                    </Image>
+                </Button>
+                <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+            </Grid>
+        </Grid>
+
+        <!--Left Button Grid-->
+        <Grid Grid.RowSpan="3">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <Button Name="TopLBtn" Grid.Column="0" Grid.Row="1"
+         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+                <Image Source="{DynamicResource TopLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
-                  <Image.RenderTransform>
-                     <TransformGroup>
-                        <RotateTransform Angle="180"/>
-                     </TransformGroup>
-                  </Image.RenderTransform>
-               </Image>
+            <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
+         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+                <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-         </Grid>
-      </Grid>
-
-      <!--Left Button Grid-->
-      <Grid Grid.RowSpan="3">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="2*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
-
-         <Button Name="TopLBtn" Grid.Column="0" Grid.Row="1"
+            <Button Name="TopRBtn" Grid.Column="2" Grid.Row="1"
          Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource TopLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="TopRBtn" Grid.Column="2" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource TopRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
+                <Image Source="{DynamicResource TopRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
          Style="{DynamicResource OmagCut_LeftGrayGradientYellowButton}">
-            <Image Source="{DynamicResource LeftArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="1" Grid.Row="2" Width="50"
+                <Image Source="{DynamicResource LeftArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="1" Grid.Row="2" Width="50"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-         <Button Name="ResetBtn" Grid.Column="1" Grid.Row="2"
+            <Button Name="ResetBtn" Grid.Column="1" Grid.Row="2"
             Style="{DynamicResource OmagCut_YellowTextButton}">
-         </Button>
-         <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
+            </Button>
+            <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
          Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RightArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="BottomLBtn" Grid.Column="0" Grid.Row="3"
+                <Image Source="{DynamicResource RightArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="BottomLBtn" Grid.Column="0" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource BottomLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
+                <Image Source="{DynamicResource BottomLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="BottomRBtn" Grid.Column="2" Grid.Row="3"
+                <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="BottomRBtn" Grid.Column="2" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource BottomRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
+                <Image Source="{DynamicResource BottomRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
-         <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
+            <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
             Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                 <Image Source="{DynamicResource CounterClockwiseRotateImg}" Width="64" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
-         </Button>
+            </Button>
 
-         <Grid Name="RotationAngle" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center" VerticalAlignment="Center">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="Auto"/>
-               <ColumnDefinition Width="Auto"/>
-            </Grid.ColumnDefinitions>
-            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50"
+            <Grid Name="RotationAngle" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center" VerticalAlignment="Center">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="Auto"/>
+                    <ColumnDefinition Width="Auto"/>
+                </Grid.ColumnDefinitions>
+                <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
+                <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
             Text="°"/>
-         </Grid>
+            </Grid>
 
-         <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
+            <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
             Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
+                <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
-         </Button>
+            </Button>
 
+            <!--Gestione sfridi-->
+            <Button Name="RemovePartBtn" Grid.ColumnSpan="2" Grid.Row="6"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-         <Button Name="RemovePartBtn" Grid.ColumnSpan="3" Grid.Row="6"
-         Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            <Button Name="ScrapsBtn" Grid.Column="3" Grid.Row="6"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-         <Grid Grid.Row="7" Grid.ColumnSpan="3">
+            <!--Gestione scarico pezzi-->
+            <Button Name="UnloadPartsBtn" Grid.ColumnSpan="2" Grid.Row="7"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+            <Grid Grid.Row="7" Grid.ColumnSpan="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+            </Grid>
+
+        </Grid>
+
+        <!--Lower button grid, sfondo grigio per coprire i bottoni della pagina sottostante-->
+        <Grid Grid.Column="1" Grid.Row="2" Background="{DynamicResource OmagCut_Gray}">
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="10*"/>
             </Grid.ColumnDefinitions>
+            <!-- Inserimento della pausa durante il movimento sulla tavola di scarico-->
+            <Button Name="PauseBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+        </Grid>
 
-         </Grid>
-
-      </Grid>
-
-      <!--Lower button grid, sfondo grigio per coprire i bottoni della pagina sottostante-->
-      <Grid Grid.Column="1" Grid.Row="2" Background="{DynamicResource OmagCut_Gray}">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="10*"/>
-         </Grid.ColumnDefinitions>
-
-
-      </Grid>
-
-   </Grid>
+    </Grid>
 
 </UserControl>

CadCuts/NestPageUC.xaml

@@ -8,7 +8,7 @@
    d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="NestPage_Initialized" Loaded="NestPage_Loaded" Unloaded="NestPage_Unloaded">
       
    <!-- Definizione della NestPage -->
-   <Grid Name="NestPageGrid" >
+   <Grid Name="NestPageGrid">
       <Grid.ColumnDefinitions>
          <ColumnDefinition Width="3*"/>
          <ColumnDefinition Width="12*"/>
@@ -78,7 +78,7 @@
                <ColumnDefinition Width="Auto"/>
                <ColumnDefinition Width="Auto"/>
             </Grid.ColumnDefinitions>
-            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50"
+            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
                Text="°"/>
@@ -99,23 +99,29 @@
             <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
          </Button>
-         
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
+
+            <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3" >
                 <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Inserisci-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
                 <Button Name="StorePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Parcheggia-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
+                <ToggleButton Name="StartCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource StartWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
             </UniformGrid>
-
-            <UniformGrid Name ="UG1"  Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="2" >
+          
+            <UniformGrid Name ="UG1"  Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="3" >
                 <Button Name="RemovePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Elimina-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
                 <ToggleButton Name="DragRettanleBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
                     <Image Source="{DynamicResource Drag_RettangleImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </ToggleButton>
+                <ToggleButton Name="SplitCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource SplitWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
             </UniformGrid>
 
             <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >

CadCuts/NestPageUC.xaml.vb

@@ -16,12 +16,18 @@ Public Class NestPageUC
    ' dati per DragRettangoli (estensio/accorciamento dei rettangoli trascinando un lato)
    Private m_bIsVisibleDragRettangle As Boolean = False
    Friend m_bIsCheckedDragRettangle As Boolean = False
+   ' dati per attivare disattivare le lavorazioni WaterJet
+   Private m_bIsVisibleSliptCurveWJ As Boolean = False
+   Friend m_bIsCheckedSplitCurveWJ As Boolean = False
+   ' dati per attivare disattivare la selezione del pubnto di inizio
+   Private m_bIsVisibleStarCurvetWJ As Boolean = False
+   Friend m_bIsCheckedStartCurveWJ As Boolean = False
 
    ' Id della curva e del taglio selezionati per eseguire il test
    Friend m_CurrSelectedCurv As Integer = GDB_ID.NULL
    Friend m_CurrSelectedSawCurv As Integer = GDB_ID.NULL
 
-   ' Id del rettangolo, del traglio e della curva da modificare tramite Drag
+   ' Id del rettangolo, del taglio e della curva da modificare tramite Drag
    Private m_nIdSelectedOutLoopRettangle As Integer = GDB_ID.NULL
    Private m_nIdSelectedRegionRettangle As Integer = GDB_ID.NULL
    Private m_nIdSelectedSawRettangle As Integer = GDB_ID.NULL
@@ -33,6 +39,10 @@ Public Class NestPageUC
    Private m_sTextContent As String = String.Empty
    Private m_dRettangleIsModified As Boolean = False
 
+   ' Id dei lato WJ da separare tramite comando ON_OFF
+   Private m_nIdSelectedSideWJ As Integer = GDB_ID.NULL
+   Private m_nIdSelectedWaterJet As Integer = GDB_ID.NULL
+
    Enum PART_POS As Integer
       IN_TABLE = -1
       NONE_TABLE = 0
@@ -52,6 +62,14 @@ Public Class NestPageUC
    Private m_bMaximizeMove As Boolean = False
    Private m_dAngStep As Double = 0
    Private m_bReducedCut As Boolean = False
+
+   Private m_bKeyCtrlPressed As Boolean = False
+   Private m_bKeyLeftShiftPressed As Boolean = False
+   Private m_dAngTotal As Double = 0
+   Private m_dStartAng As Double = 0
+   Private m_bStartRot As Boolean = False
+   Private m_bStartMove As Boolean = False
+
    ' Dati per tolleranza spessore Trf
    Private m_dTrfThickTolerance As Double = 0
    ' Dati movimento registrazione grezzo
@@ -84,14 +102,38 @@ Public Class NestPageUC
       RemovePartBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 3)            'Remove part - Elimina pezzo
       SelectAllBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 4)             'Select All - Seleziona Tutto
       DeselectAllBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 5)           'Deselect All - Deseleziona Tutto
+      DragRettanleBtn.ToolTip = "Strech"
 
+      Dim nColumsIn_UG1 As Integer = 2
       ' gestisco la visualizzazione del comando PAN (per il drag dei rettangoli)
       m_bIsVisibleDragRettangle = (GetPrivateProfileInt(S_NEST, K_DRAG_RETTANGLE, 0, m_MainWindow.GetIniFile()) <> 0)
       If Not m_bIsVisibleDragRettangle Then
-         UG1.Columns = 1
+         nColumsIn_UG1 = 1
          DragRettanleBtn.Visibility = Visibility.Collapsed
       End If
 
+      ' gestisco la visualizzazione del comando Splt (per i tagli waterjet)
+      If m_MainWindow.m_CurrentMachine.WaterJettingActive Then
+         nColumsIn_UG1 += 1
+         SplitCurveWJBtn.Visibility = Visibility.Visible
+         '91133=Separa
+         SplitCurveWJBtn.ToolTip = EgtMsg(91133)
+      Else
+         SplitCurveWJBtn.Visibility = Visibility.Collapsed
+      End If
+      UG1.Columns = nColumsIn_UG1
+
+      Dim nColumnIn_UG0 As Integer = 2
+      ' gestisco la visualizzazione del comando Punto_Inizio (per i tagli waterjet)
+      If m_MainWindow.m_CurrentMachine.WaterJettingActive Then
+         nColumnIn_UG0 += 1
+         StartCurveWJBtn.Visibility = Visibility.Visible
+         ' 91132=Start
+         StartCurveWJBtn.ToolTip = EgtMsg(91132)
+      Else
+         StartCurveWJBtn.Visibility = Visibility.Collapsed
+      End If
+      UG0.Columns = nColumnIn_UG0
    End Sub
 
    Private Sub NestPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -191,7 +233,7 @@ Public Class NestPageUC
                End If
                ' recupero il gruppo della lavorazione associata
                Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
-               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, "PV")
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
                Dim nIdSaw As Integer = EgtGetFirstNameInGroup(nIdPV, "Saw" & nIdMy.ToString)
                If Not EgtGetGroupObjs(nIdSaw) Then
                   m_CurrSelectedSawCurv = nIdSaw
@@ -209,6 +251,161 @@ Public Class NestPageUC
       Return
    End Sub
 
+   ' funzione per la selezione dei lati su cui operare la separazione del tagli waterjet
+   Private Sub OnMyMouseDownSceneSplitCurv(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Verifico di essere il gestore attivo e non in modalità registrazione
+      If Not m_bActive Or m_bRegister Then Return
+      ' Si può selezionare solo con il tasto sinistro e se il bottone TEST Attivo
+      If e.Button <> Windows.Forms.MouseButtons.Left Or
+         Not m_bIsCheckedSplitCurveWJ Then
+         Return
+      End If
+      ' Se esiste un elemento selezionato
+      EgtResetMark(m_nIdSelectedWaterJet)
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sLayer As String = String.Empty
+         ' layer di origine
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del Layer
+         EgtGetName(nIdParent, sLayer)
+         ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
+         If sLayer = NAME_OUTLOOP Then
+            If EgtGetType(nIdMy) = GDB_TY.CRV_ARC OrElse EgtGetType(nIdMy) = GDB_TY.CRV_COMPO OrElse EgtGetType(nIdMy) = GDB_TY.CRV_LINE Then
+               If m_nIdSelectedSideWJ <> GDB_ID.NULL Or m_nIdSelectedSideWJ = nIdMy Then
+                  EgtDeselectObj(m_nIdSelectedSideWJ)
+               End If
+               ' recupero il gruppo della lavorazione associata
+               Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
+               ' VERIFICA: recupero l'elenco delle Preview di Tipo WaterJet associate a questo Part
+               Dim ListGroup As List(Of Integer) = ResearchGropuWJ(nIdParent, nIdPV)
+               ' VERIFICA: se esistono delle lavorazioni associate al percorso OutLoop di tipo Saw allora non procedo
+               Dim ListGroupSaw As List(Of Integer) = ResearchGropuSaw(nIdParent, nIdPV)
+               ' se non esiste almeno 1 Preview di tipo WaterJet
+               If ListGroup.Count > 0 Then
+                  m_nIdSelectedSideWJ = nIdMy
+                  Dim nValInfo As String = 1
+                  Dim nNewValInfo As Integer = nValInfo
+                  If EgtGetInfo(nIdMy, INFO_JOINENTITY, nValInfo) Then
+                     If nValInfo = 1 Then
+                        nNewValInfo = 0
+                     Else
+                        nNewValInfo = 1
+                     End If
+                  Else
+                     ' se manca l'info allora il taglio sValInfo = "1" quindi separo il taglio
+                     nNewValInfo = 0
+                  End If
+                  EgtSetInfo(nIdMy, INFO_JOINENTITY, nNewValInfo)
+                  ' Ricalcolo tutte le lavorazioni
+                  Dim nWarn As Integer = 0
+                  ResetAllMachinings(nWarn)
+                  ' recupero l'indice del PreView che deve essere acceso per indicare la selezione
+                  ListGroup = ResearchGropuWJ(nIdParent, nIdPV)
+                  Dim nIdWJ As Integer = GetPVIdFromIdSide(ListGroup, nIdMy)
+                  GetCurrentPVFromIdSide(ListGroup, nIdMy, nIdWJ, nIdParent)
+                  ' assegno un identificativo grafico per inidcare che è un taglio separato
+                  If nNewValInfo = 0 Then
+                     AssignFlagOnGraphic(nIdMy, nIdParentPart)
+                  Else
+                     EraseFlagOnGraphic(nIdMy, nIdParentPart)
+                  End If
+                  m_nIdSelectedWaterJet = nIdWJ
+                  ' salvo il valore del PreView evidenziato
+                  EgtSetMark(nIdWJ)
+                  EgtSelectObj(nIdMy)
+                  EgtDraw()
+                  Exit While
+               End If
+
+            End If
+         End If
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+      Return
+   End Sub
+
+   ' funzione per la selezione del punto di inizio tagli waterjet (percorso chiuso)
+   Private Sub OnMyMouseDownSceneStartCurv(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Verifico di essere il gestore attivo e non in modalità registrazione
+      If Not m_bActive Or m_bRegister Then Return
+      ' Si può selezionare solo con il tasto sinistro e se il bottone TEST Attivo
+      If e.Button <> Windows.Forms.MouseButtons.Left Or
+         Not m_bIsCheckedStartCurveWJ Then
+         Return
+      End If
+
+      ' Acquisisco punto da disegno
+      Dim ptStartCurv As New Point3d
+      EgtUnProjectPoint(e.Location, ptStartCurv)
+      ' Aggiusto Z punto acquisito (è in globale)
+      Dim ptRawMax As New Point3d
+      Dim ptRawMin As New Point3d
+      If GetRawBox(ptRawMin, ptRawMax) Then
+         ptStartCurv.z = ptRawMax.z
+      End If
+
+      ' Se esiste un elemento selezionato
+      EgtResetMark(m_nIdSelectedWaterJet)
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sLayer As String = String.Empty
+         ' layer di origine
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del Layer
+         EgtGetName(nIdParent, sLayer)
+         ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
+         If sLayer = NAME_OUTLOOP Or sLayer = NAME_INLOOP Then
+            If EgtGetType(nIdMy) = GDB_TY.CRV_ARC OrElse EgtGetType(nIdMy) = GDB_TY.CRV_COMPO OrElse EgtGetType(nIdMy) = GDB_TY.CRV_LINE Then
+               ' verifico che il contorno sia chiuso, altrimenti esco
+               If Not VerifyOutLoopIsClosed(nIdParent) Then
+                  ' 91131=Il contorno non è chiuso
+                  m_CurrProjPage.SetWarningMessage(EgtMsg(91131))
+                  Exit While
+               End If
+               ' recupero il gruppo della lavorazione associata
+               Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
+               ' VERIFICA: recupero l'elenco delle Preview di Tipo WaterJet_n_S associate a questo Part
+               Dim ListGroup As List(Of Integer) = ResearchGropuWJ(nIdParent, nIdPV)
+               ' VERIFICA: se esistono delle lavorazioni associate al percorso OutLoop di tipo Saw allora non procedo
+               Dim ListGroupSaw As List(Of Integer) = ResearchGropuSaw(nIdParent, nIdPV)
+               ' se non esiste almeno 1 Preview di tipo WaterJet
+               If ListGroup.Count = 1 And ListGroupSaw.Count = 0 Then
+                  EgtSetInfo(nIdParent, INFO_START, ptStartCurv)
+                  ' Ricalcolo tutte le lavorazioni
+                  Dim nWarn As Integer = 0
+                  ResetAllMachinings(nWarn)
+                  ' recupero l'indice del PreView che deve essere acceso per indicare la selezione
+                  ListGroup = ResearchGropuWJ(nIdParent, nIdPV)
+                  Dim nIdWJ As Integer = GetPVIdFromIdSide(ListGroup, nIdMy)
+                  GetCurrentPVFromIdSide(ListGroup, nIdMy, nIdWJ, nIdParent)
+                  m_nIdSelectedWaterJet = nIdWJ
+                  EgtSetMark(nIdWJ)
+                  EgtDraw()
+                  Exit While
+               Else
+                  ' 91131=Il contorno non è chiuso
+                  m_CurrProjPage.SetWarningMessage(EgtMsg(91131))
+                  Exit While
+               End If
+
+            End If
+         End If
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+      Return
+   End Sub
+
 #Region "DRAG RETTANGLE"
 
    ' funzione chiamata da OnMyMouseMoveScene: verifica che la selezione sia corretta (deve essere il lato di una figura rettangolare)
@@ -216,7 +413,7 @@ Public Class NestPageUC
       ' Verifico di essere il gestore attivo e non in modalità registrazione
       If Not m_bActive Or m_bRegister Then Return
       ' Si può selezionare solo con il tasto sinistro e se il bottone TEST Attivo
-      If e.Button <> Windows.Forms.MouseButtons.Left then
+      If e.Button <> Windows.Forms.MouseButtons.Left Then
          Return
       End If
       ' Verifico se selezionato indicativo di pezzo
@@ -511,6 +708,186 @@ Public Class NestPageUC
 
 #End Region    ' Drag Rettangolo
 
+#Region "SPLIT/START CURVE"
+
+   ' restituisce l'elenco dei Gruppi Waterjet associati al contorno indicato
+   Public Function ResearchGropuWJ(nIdOutLoop As Integer, nIdPV As Integer) As List(Of Integer)
+      Dim ListOfGroupPV As New List(Of Integer)
+      Dim nIdGroup As Integer = GDB_ID.NULL
+      Dim nIdMy As Integer = GDB_ID.NULL
+      ' recupero il primo lato dall'elenco dei lati della figura
+      nIdMy = EgtGetFirstInGroup(nIdOutLoop)
+      ' altrimenti cerco all'interno del layer OutLoop per ogni lato la lavorazione associata
+      While nIdMy <> GDB_ID.NULL
+         ' verifico se esiste una Preview associata al lato
+         nIdGroup = EgtGetFirstNameInGroup(nIdPV, "Waterjet" & nIdMy.ToString & "S")
+         If nIdGroup <> GDB_ID.NULL Then
+            ListOfGroupPV.Add(nIdGroup)
+         End If
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return ListOfGroupPV
+   End Function
+
+   ' restituisce l'elenco dei Gruppi Saw associati al contorno indicato
+   Public Function ResearchGropuSaw(nIdOutLoop As Integer, nIdPV As Integer) As List(Of Integer)
+      Dim ListOfGroupPV As New List(Of Integer)
+      Dim nIdGroup As Integer = GDB_ID.NULL
+      Dim nIdMy As Integer = GDB_ID.NULL
+      ' recupero il primo lato dall'elenco dei lati della figura
+      nIdMy = EgtGetFirstInGroup(nIdOutLoop)
+      ' altrimenti cerco all'interno del layer OutLoop per ogni lato la lavorazione associata
+      While nIdMy <> GDB_ID.NULL
+         ' verifico se esiste una Preview associata al lato
+         nIdGroup = EgtGetFirstNameInGroup(nIdPV, "Saw" & nIdMy.ToString)
+         If nIdGroup <> GDB_ID.NULL Then
+            ListOfGroupPV.Add(nIdGroup)
+         End If
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return ListOfGroupPV
+   End Function
+
+   Public Function GetPVIdFromIdSide(ListGroup As List(Of Integer), nIdMy As Integer) As Integer
+      Dim IdWaterjetPV As Integer = GDB_ID.NULL
+      For Each nIdItem As Integer In ListGroup
+         Dim sName As String = String.Empty
+         If EgtGetName(nIdItem, sName) Then
+            If sName.Contains(nIdMy.ToString) Then
+               IdWaterjetPV = nIdItem
+               Exit For
+            End If
+         End If
+      Next
+      Return IdWaterjetPV
+   End Function
+
+   Public Sub GetCurrentPVFromIdSide(ListGroup As List(Of Integer), nIdMy As Integer, ByRef nIdWj As Integer, nIdParent As Integer)
+      Dim nObjInGroup As Integer = EgtGetGroupObjs(nIdParent)
+      Dim nCount As Integer = 0
+      GetNextSideJoint(ListGroup, nIdMy, nIdWj, nCount, nObjInGroup)
+      If nIdWj <> GDB_ID.NULL Then Return
+      GetPrevSideJoint(ListGroup, nIdMy, nIdWj, nCount, nObjInGroup)
+   End Sub
+
+   ' funzione ricorsiva per la ricerca del lato al quale è associata la PreView
+   Private Sub GetNextSideJoint(ListGroup As List(Of Integer), nIdMy As Integer, ByRef nIdWj As Integer, ByRef nCount As Integer, nObjInGroup As Integer)
+      Dim nValInfo As Integer = 1
+      ' espressione di controllo per evitare di generare Loop infinito
+      If nCount > nObjInGroup Then Return
+      If nIdWj = GDB_ID.NULL Then
+         Dim nIdWJNext As Integer = EgtGetNext(nIdMy)
+         If nIdWJNext = GDB_ID.NULL Then nIdWJNext = EgtGetFirstInGroup(EgtGetParent(nIdMy))
+         nCount += 1
+         EgtGetInfo(nIdWJNext, INFO_JOINENTITY, nValInfo)
+         If nValInfo = 1 Then
+            nIdWj = GetPVIdFromIdSide(ListGroup, nIdWJNext)
+            If nIdWj <> GDB_ID.NULL Then Return
+         Else
+            Return
+         End If
+         'nIdWJNext = EgtGetNext(nIdWJNext)
+         GetNextSideJoint(ListGroup, nIdWJNext, nIdWj, nCount, nObjInGroup)
+         If nIdWj <> GDB_ID.NULL Then Return
+      End If
+   End Sub
+
+   ' funzione ricorsiva per la ricerca del lato al quale è associata la PreView
+   Private Sub GetPrevSideJoint(ListGroup As List(Of Integer), nIdMy As Integer, ByRef nIdWj As Integer, ByRef nCount As Integer, nObjInGroup As Integer)
+      Dim nValInfo As Integer = 1
+      ' espressione di controllo per evitare di generare Loop infinito
+      If nCount > nObjInGroup Then Return
+      If nIdWj = GDB_ID.NULL Then
+         Dim nIdWJPrev As Integer = EgtGetPrev(nIdMy)
+         ' se arrivato al primo valore allora continuo la ricerca dall'ultimo
+         If nIdWJPrev = GDB_ID.NULL Then nIdWJPrev = EgtGetLastInGroup(EgtGetParent(nIdMy))
+         nCount += 1
+         EgtGetInfo(nIdWJPrev, INFO_JOINENTITY, nValInfo)
+         If nValInfo = 1 Then
+            nIdWj = GetPVIdFromIdSide(ListGroup, nIdWJPrev)
+            If nIdWj <> GDB_ID.NULL Then Return
+         Else
+            Return
+         End If
+         'nIdWJPrev = EgtGetPrev(nIdWJPrev)
+         GetPrevSideJoint(ListGroup, nIdWJPrev, nIdWj, nCount, nObjInGroup)
+         If nIdWj <> GDB_ID.NULL Then Return
+
+      End If
+   End Sub
+
+   Public Sub ResetSplitCurvWJParam()
+      EgtDeselectObj(m_nIdSelectedSideWJ)
+      EgtResetMark(m_nIdSelectedWaterJet)
+      m_nIdSelectedSideWJ = GDB_ID.NULL
+      m_nIdSelectedWaterJet = GDB_ID.NULL
+      EgtDraw()
+   End Sub
+
+   ' ricevo l'ID del percorso di lavorazione WJ al quale associo una etichetta grafica con scritto "S"
+   Private Sub AssignFlagOnGraphic(nIdMy As Integer, IdParentPart As Integer)
+      ' cerco se esiste già un layer nominato "AUX_SPLIT_WJ", altrimenti lo creo
+      Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(IdParentPart, INFO_AUX_SPLIT_WJ)
+      If IdAuxLayer = GDB_ID.NULL Then
+         IdAuxLayer = EgtCreateGroup(IdParentPart)
+         EgtSetName(IdAuxLayer, INFO_AUX_SPLIT_WJ)
+      End If
+      ' recupero il punto medio del segmento selezionato
+      Dim MidPoint As Point3d
+      EgtMidPoint(nIdMy, GDB_RT.GLOB, MidPoint)
+      'Dim nIdTextFlag As Integer = EgtCreateText(IdAuxLayer, MidPoint, "*", 20, GDB_RT.GLOB)
+      Dim nIdTextFlag As Integer = GetCreateFlagText(nIdMy, IdAuxLayer)
+      EgtSetColor(nIdTextFlag, New Color3d(255, 0, 0))
+      EgtSetName(nIdTextFlag, "RefSide_" & nIdMy.ToString)
+   End Sub
+
+   Private Function GetCreateFlagText(nId As Integer, nIdLayer As Integer, Optional sText As String = "*") As Integer
+      ' recupero il punto medio
+      Dim MidPoint As Point3d
+      EgtMidPoint(nId, GDB_RT.GLOB, MidPoint)
+      ' recupero la direzione del vettore nel punto medio
+      Dim vVers As Vector3d
+      EgtMidVector(nId, GDB_RT.GLOB, vVers)
+      vVers.Normalize()
+      vVers.Rotate(Vector3d.Z_AX, 90)
+      ' Ingombro complessivo della lavorazione
+      Dim ptMin, ptMax As Point3d
+      EgtStartPoint(nId, GDB_RT.GLOB, ptMin)
+      EgtEndPoint(nId, GDB_RT.GLOB, ptMax)
+      ' Metto il numero nel centro
+      Dim dRadXY = Point3d.DistXY(ptMin, ptMax)
+      Dim dHtxt As Double = 50
+      Dim dRat As Double = 0.75
+      If dRadXY < 200 Then
+         dHtxt = 40
+         dRat = 0.6
+      ElseIf dRadXY < 25 Then
+         dHtxt = 25
+         dRat = 0.5
+      End If
+      ' determino la posizione del flag
+      MidPoint.x += vVers.x * dHtxt / 2
+      MidPoint.y += vVers.y * dHtxt / 2
+
+      Return EgtCreateTextAdv(nIdLayer, MidPoint, 0, sText, "", 300, False, dHtxt, dRat, 0, INS_POS.MC, GDB_RT.GLOB)
+   End Function
+
+   Private Sub EraseFlagOnGraphic(nIdMy As Integer, IdParentPart As Integer)
+      ' cerco se esiste già un layer nominato "AUX_SPLIT_WJ", altrimenti lo creo
+      Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(IdParentPart, INFO_AUX_SPLIT_WJ)
+      If IdAuxLayer = GDB_ID.NULL Then Return
+      Dim nIdTextFlag As Integer = EgtGetFirstNameInGroup(IdAuxLayer, "RefSide_" & nIdMy.ToString)
+      EgtErase(nIdTextFlag)
+   End Sub
+
+   Public Sub ResetStartCurvWJParam()
+      EgtResetMark(m_nIdSelectedWaterJet)
+      m_nIdSelectedWaterJet = GDB_ID.NULL
+      EgtDraw()
+   End Sub
+
+#End Region    ' Split/Start Curve
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo e non in modalità registrazione
       If Not m_bActive Or m_bRegister Then Return
@@ -539,6 +916,18 @@ Public Class NestPageUC
          Return
       End If
 
+      ' se in modalità SplitCurveWJ (separazione dei tagli WaterJet)
+      If m_bIsCheckedSplitCurveWJ Then
+         OnMyMouseDownSceneSplitCurv(sender, e)
+         Return
+      End If
+
+      ' se in modalità StartCurveWJ (punto di inzio taglio waterjet)
+      If m_bIsCheckedStartCurveWJ Then
+         OnMyMouseDownSceneStartCurv(sender, e)
+         Return
+      End If
+
       ' Per default no drag
       m_bDrag = False
       ' Verifico se selezionato indicativo di pezzo
@@ -588,10 +977,10 @@ Public Class NestPageUC
 
             ' Drag possibile
             m_bDrag = True
-               Exit While
-            Else
-               ' verifico se l'elemento selezionato è il nome della tavola
-               If EgtGetType(nId) = GDB_TY.EXT_TEXT AndAlso (sNamePartId = MAIN_TAB Or sNamePartId = SECOND_TAB) Then
+            Exit While
+         Else
+            ' verifico se l'elemento selezionato è il nome della tavola
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT AndAlso (sNamePartId = MAIN_TAB Or sNamePartId = SECOND_TAB) Then
                Dim nRes As Integer = m_MainWindow.m_CadCutPageUC.m_ProjectMgr.ChangeTable()
                ' se non è stata eseguita nessuna scelta esco dal ciclo 
                If nRes = 0 Then Exit While
@@ -673,7 +1062,9 @@ Public Class NestPageUC
       m_locPrev = e.Location
       m_bDrag = m_bDrag AndAlso EgtUnProjectPoint(e.Location, m_ptPrev)
       m_bDragToStart = m_bDrag
+      ' attivo la modalità di traslazione e rotazione senza cltrollo collisioni (solo in fase di Drag)
       m_bVerify = m_bDrag AndAlso (Keyboard.Modifiers And ModifierKeys.Shift) > 0
+      m_bKeyLeftShiftPressed = m_bVerify
       m_vtTotMove = Vector3d.NULL()
    End Sub
 
@@ -736,51 +1127,114 @@ Public Class NestPageUC
          m_bVerify = True
          m_bFromParking = True
       End If
+
       ' Inizio esecuzione di drag
       m_bDragging = True
       ' Ricavo il punto corrente in coordinate mondo
       Dim ptCurr As Point3d
       EgtUnProjectPoint(e.Location, ptCurr)
-      ' Ricavo il vettore di movimento
-      Dim vtMove As Vector3d = ptCurr - m_ptPrev
-      ' Muovo i pezzi selezionati di quanto possibile
-      If vtMove.SqLen() > EPS_SMALL * EPS_SMALL Then
-         ' Se movimento con sola verifica finale
-         If m_bVerify Then
-            EgtMove(nMoveId, vtMove)
-            m_vtTotMove += vtMove
-            ' altrimenti caso con verifica durante il movimento
-         Else
-            ' Aggiorno regioni per nesting
-            UpdateNestRegions()
-            EnableReferenceRegion(False)
-            ' muovo il pezzo
-            EgtMovePart(nMoveId, m_bReducedCut, vtMove)
-            EgtSaveCollInfo()
-            ' se movimento risultante nullo, provo con movimento tangente
-            Dim bTgMoved As Boolean = False
-            If vtMove.IsSmall() Then
-               ' riprovo con movimento tangente
-               Dim vtTgMove As Vector3d = ptCurr - m_ptPrev
-               EgtTgMovePartOnCollision(nMoveId, m_bReducedCut, vtTgMove)
-               bTgMoved = (Not vtTgMove.IsSmall())
-            End If
-            ' se abilitato magnetico (allineamento + snap), lo provo
-            Dim bAlignMoved As Boolean = False
-            Dim bSnapMoved As Boolean = False
-            If m_bMagnetic Then
-               If Not GetLockOnRotation(nMoveId) Then
-                  EgtAlignPartOnCollision(nMoveId, m_bReducedCut, bAlignMoved)
-               End If
-               If m_dSnapDist > EPS_SMALL Then
-                  EgtRestoreCollInfo()
-                  EgtMovePartToSnapPointOnCollision(nMoveId, m_bReducedCut, m_dSnapDist, bSnapMoved)
-               End If
-            End If
-            m_CurrProjPage.ResetOrderMachiningFlag()
+
+      ' la rotazione è attivabile solo se premuto il tasto Ctrl (e non sono in parheggio)
+      m_bKeyCtrlPressed = m_bDrag AndAlso (Keyboard.Modifiers And ModifierKeys.Control) > 0
+
+      '-------------Inizio ROTAZIONE ----------------
+      If m_bKeyCtrlPressed AndAlso (Not m_bFromParking OrElse m_bKeyLeftShiftPressed) Then
+         ' Calcolo il centro di rotazione come centro del cluster
+         Dim ptCen As Point3d
+         If Not EgtGetPartPartClusterCenterGlob(nMoveId, ptCen) Then Return
+         ' definisco il vettore dal centro del pezzo alla posizione del cursore
+         Dim vtCurr As Vector3d = ptCurr - ptCen
+         Dim dLen, dHAng, dVAng As Double
+         ' recupero l'angolo orizzontale del vettore
+         vtCurr.ToSpherical(dLen, dHAng, dVAng)
+         If Not m_bStartRot Then
+            m_dAngTotal = 0
+            ' notifico una rotazione
+            m_bStartRot = True
+            m_dStartAng = dVAng
          End If
-         EgtDraw()
-         ' Eventuale notifica al VeinMatching
+         Dim dDeltaAng As Double = dVAng - m_dStartAng
+         ' gestione del passaggio da 0° → 360° evitando mantenendo la visualizzazione fluida       
+         If Math.Abs(dDeltaAng) > 90 Then
+            If m_dStartAng < 180 And dVAng > 180 Then
+               dDeltaAng = dVAng - 360 - m_dStartAng
+            ElseIf m_dStartAng > 180 And dVAng < 180 Then
+               dDeltaAng = dVAng - m_dStartAng + 360
+            End If
+         End If
+         ' Rotazione del pezzo attorno al suo centro
+         If Math.Abs(dDeltaAng) > EPS_ANG_SMALL Then
+            ' se il tasto Shift è premuto (disabilitato il controllo collisioni durante il Drag) 
+            If m_bKeyLeftShiftPressed Then
+               EgtRotate(nMoveId, ptCen, Vector3d.Z_AX(), dDeltaAng, GDB_RT.GLOB)
+               m_dAngTotal += dDeltaAng
+            Else
+               ' esegue la rotazione fino ad incontrare un altro pezzo
+               RotatePartInsideBond(dDeltaAng, nMoveId)
+               m_CurrProjPage.ResetOrderMachiningFlag()
+               ' Eventuale notifica al VeinMatching
+               Dim nId As Integer = EgtGetFirstSelectedObj()
+               While nId <> GDB_ID.NULL
+                  VeinMatching.OnMovePartInRaw(nId)
+                  nId = EgtGetNextSelectedObj()
+               End While
+            End If
+            m_dStartAng = dVAng
+         End If
+         '-------------Fine ROTAZIONE ----------------
+
+      Else
+         ' -------------Inizio TRASLAZIONE ---------------
+         ' Ricavo il vettore di movimento
+         Dim vtMove As Vector3d = ptCurr - m_ptPrev
+         ' Muovo i pezzi selezionati di quanto possibile
+         If vtMove.SqLen() > EPS_SMALL * EPS_SMALL Then
+            ' notifico una traslazione
+            If Not m_bStartMove Then
+               m_bStartMove = True
+            End If
+
+            ' Se movimento con sola verifica finale (disabilitato il controllo collisioni durante il Drag)
+            If m_bVerify Then
+               EgtMove(nMoveId, vtMove)
+               m_vtTotMove += vtMove
+               ' altrimenti caso con verifica durante il movimento
+            Else
+               ' Aggiorno regioni per nesting
+               UpdateNestRegions()
+               EnableReferenceRegion(False)
+               ' muovo il pezzo
+               EgtMovePart(nMoveId, m_bReducedCut, vtMove)
+               EgtSaveCollInfo()
+               ' se movimento risultante nullo, provo con movimento tangente
+               Dim bTgMoved As Boolean = False
+               If vtMove.IsSmall() Then
+                  ' riprovo con movimento tangente
+                  Dim vtTgMove As Vector3d = ptCurr - m_ptPrev
+                  EgtTgMovePartOnCollision(nMoveId, m_bReducedCut, vtTgMove)
+                  bTgMoved = (Not vtTgMove.IsSmall())
+               End If
+               ' se abilitato magnetico (allineamento + snap), lo provo
+               Dim bAlignMoved As Boolean = False
+               Dim bSnapMoved As Boolean = False
+               If m_bMagnetic Then
+                  If Not GetLockOnRotation(nMoveId) Then
+                     EgtAlignPartOnCollision(nMoveId, m_bReducedCut, bAlignMoved)
+                  End If
+                  If m_dSnapDist > EPS_SMALL Then
+                     EgtRestoreCollInfo()
+                     EgtMovePartToSnapPointOnCollision(nMoveId, m_bReducedCut, m_dSnapDist, bSnapMoved)
+                  End If
+               End If
+               m_CurrProjPage.ResetOrderMachiningFlag()
+            End If
+            ' -------------Fine TRASLAZIONE ---------------
+         End If
+      End If
+
+      EgtDraw()
+      ' Eventuale notifica al VeinMatching
+      If m_bStartMove OrElse m_bStartRot Then
          If nMoveId = GDB_ID.SEL Then
             Dim nId As Integer = EgtGetFirstSelectedObj()
             While nId <> GDB_ID.NULL
@@ -791,10 +1245,15 @@ Public Class NestPageUC
             VeinMatching.OnMovePartInRaw(nMoveId)
          End If
       End If
+
       ' Aggiorno il punto precedente
       m_ptPrev = ptCurr
       ' Terminata esecuzione di drag
       m_bDragging = False
+      '' elimino il ponticello associato: nella vilualizzazione il percorso di lavorazioni non si muove! in attesa di gestione
+      'DeleteBridgeAssociated(nMoveId)
+      ' Resetto i ponticelli (per ora non sono in grado di muoverli assieme ai pezzi)
+      ResetAllBRidges()
    End Sub
 
    Private Sub OnMyMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseUpScene
@@ -802,56 +1261,47 @@ Public Class NestPageUC
       If Not m_bActive Then Return
       ' verifico che non sia attivo il comando Test
       If m_bSelectCurv Then Return
-      ' verifico che non sia attivo il comando di Drag dei rettangoli
+      ' verifico che sia attivo il comando di Drag dei rettangoli
       If m_bIsCheckedDragRettangle Then
          ' deseleziono gli oggeti, resetto le variabili usate, aggiorno il disegno
          ResetDragRettangleParam()
          Return
       End If
+      ' verifico che sia attivo il comando di modifica tagli waterjet
+      If m_bIsCheckedSplitCurveWJ Then
+         Return
+      End If
+      If m_bIsCheckedStartCurveWJ Then
+         Return
+      End If
 
       ' Se eseguito drag
       If Not m_bDragToStart Then
-         ' Se movimento con sola verifica finale
-         If m_bVerify Then
-            ' Determino cosa verificare
-            Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
-            ' Aggiorno regioni per nesting
-            UpdateNestRegions()
-            EnableReferenceRegion(False)
-            ' Eseguo verifica
-            If VerifyTrfData(nMoveId) And EgtVerifyPart(nMoveId, m_bReducedCut) Then
-               m_CurrProjPage.ResetOrderMachiningFlag()
-               ' Non superata riporto alla posizione iniziale
+         ' Se movimento con sola verifica finale ----- TRASLAZIONE
+         If Not m_bStartRot And m_bStartMove Then
+            VerifyMove()
+            ' Se movimento con sola verifica finale ----- TRASLAZIONE + ROTAZIONE
+         ElseIf m_bStartRot And m_bStartMove Then
+            If Not m_bFromParking Then
+               VerifyRot()
             Else
-               If m_bFromParking Then
-                  m_CurrProjPage.ClearMessage()
-                  PreRemoveOnePart(nMoveId)
-                  VeinMatching.OnRemovePartFromRaw(nMoveId)
-               Else
-                  EgtMove(nMoveId, -m_vtTotMove)
-                  ' Eventuale notifica al VeinMatching
-                  If nMoveId = GDB_ID.SEL Then
-                     Dim nId As Integer = EgtGetFirstSelectedObj()
-                     While nId <> GDB_ID.NULL
-                        VeinMatching.OnMovePartInRaw(nId)
-                        nId = EgtGetNextSelectedObj()
-                     End While
-                  Else
-                     VeinMatching.OnMovePartInRaw(nMoveId)
-                  End If
-               End If
-               '---------------------- COUNTER PART ----------------------
-               Dim sRefGroup As String = String.Empty
-               If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
-                  ' accendo il layer che contiene il contatore (spento in fase di Drag)
-                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
-                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
-                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
-                  CountPartInFamily(sRefGroup)
-               End If
-               '---------------------- COUNTER PART ----------------------
+               ' forzo il reset delle info di rotazione
+               m_dStartAng = 0
+               m_dAngTotal = 0
+               m_bStartRot = False
+            End If
+            VerifyMove()
+            ' verifico se la posizione finale della rotazione è corretta ----- ROTAZIONE
+         ElseIf m_bStartRot And Not m_bStartMove Then
+            If m_bFromParking Then
+               VerifyMove()
+               ' forzo il reset delle info di rotazione
+               m_dStartAng = 0
+               m_dAngTotal = 0
+               m_bStartRot = False
+            Else
+               VerifyRot()
             End If
-            m_bFromParking = False
             ' altrimenti caso con verifica durante il movimento
          Else
             ' Basta reset alla fine
@@ -903,8 +1353,8 @@ Public Class NestPageUC
          VeinMatching.OnDeselectPart(m_nIdToDesel)
       End If
 
-
       ' Reset
+      GetFamilyGroupInPark()
       m_bDrag = False
       m_nIdToSel = GDB_ID.NULL
       m_nIdToDesel = GDB_ID.NULL
@@ -915,6 +1365,70 @@ Public Class NestPageUC
       EgtDraw()
    End Sub
 
+   Private Sub VerifyMove()
+      If m_bVerify Then
+         ' Determino cosa verificare
+         Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
+         ' Aggiorno regioni per nesting
+         UpdateNestRegions()
+         EnableReferenceRegion(False)
+         ' Eseguo verifica
+         If VerifyTrfData(nMoveId) And EgtVerifyPart(nMoveId, m_bReducedCut) Then
+            m_CurrProjPage.ResetOrderMachiningFlag()
+            ' Non superata riporto alla posizione iniziale
+         Else
+            If m_bFromParking Then
+               m_CurrProjPage.ClearMessage()
+               PreRemoveOnePart(nMoveId)
+               VeinMatching.OnRemovePartFromRaw(nMoveId)
+            Else
+               EgtMove(nMoveId, -m_vtTotMove)
+               ' Eventuale notifica al VeinMatching
+               If nMoveId = GDB_ID.SEL Then
+                  Dim nId As Integer = EgtGetFirstSelectedObj()
+                  While nId <> GDB_ID.NULL
+                     VeinMatching.OnMovePartInRaw(nId)
+                     nId = EgtGetNextSelectedObj()
+                  End While
+               Else
+                  VeinMatching.OnMovePartInRaw(nMoveId)
+               End If
+            End If
+            '---------------------- COUNTER PART ----------------------
+            ' solo se pezzo disposto in tavola
+            If m_bFromParking Then
+               Dim sRefGroup As String = String.Empty
+               If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
+                  ' accendo il layer che contiene il contatore (spento in fase di Drag)
+                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
+                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
+                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
+                  CountPartInFamily(sRefGroup)
+               End If
+            End If
+            '---------------------- COUNTER PART ----------------------
+         End If
+         m_bFromParking = False
+      End If
+   End Sub
+
+   Private Sub VerifyRot()
+      ' se comando Shift è stato attivato
+      If m_bKeyLeftShiftPressed Then
+         ' Determino cosa verificare
+         Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
+         If Not EgtVerifyPart(nMoveId, m_bReducedCut) Then
+            Dim ptCen As Point3d
+            If Not EgtGetPartPartClusterCenterGlob(nMoveId, ptCen) Then Return
+            EgtRotate(nMoveId, ptCen, Vector3d.Z_AX(), -m_dAngTotal, GDB_RT.GLOB)
+         End If
+      End If
+      ' resetto i valori 
+      m_dStartAng = 0
+      m_dAngTotal = 0
+      m_bStartRot = False
+   End Sub
+
    Friend Function SelectPart(nPartId As Integer, bNotifyVM As Boolean) As Boolean
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Determino se pezzo in tavola o in parcheggio
@@ -1186,7 +1700,7 @@ Public Class NestPageUC
       If m_nPartPos <> PART_POS.IN_TABLE Then
          Dim nId As Integer = EgtGetFirstSelectedObj()
          While nId <> GDB_ID.NULL
-            ' Se pezzo con rotazione libera
+            ' Se pezzo con rotazione libera (in parcheggio)
             If Not EgtExistsInfo(nId, INFO_PARTROT) Then
                ' Calcolo il centro di rotazione come centro del pezzo
                Dim ptCen As Point3d
@@ -1222,25 +1736,30 @@ Public Class NestPageUC
          Return True
          ' Altrimenti li ruoto tenendo conto delle collisioni
       Else
-         ' Verifico se ci sono dei pezzi bloccati in rotazione
-         Dim bLockedRot As Boolean = GetLockOnRotation(GDB_ID.SEL)
-         ' Se tutti i pezzi possono ruotare
-         If Not bLockedRot Then
-            ' Calcolo il centro di rotazione come centro del cluster
-            Dim ptCen As Point3d
-            If Not EgtGetPartPartClusterCenterGlob(GDB_ID.SEL, ptCen) Then Return False
-            ' Aggiorno regioni per nesting
-            UpdateNestRegions()
-            EnableReferenceRegion(False)
-            ' Verifico rotazione complessiva
-            EgtRotate(GDB_ID.SEL, ptCen, Vector3d.Z_AX(), dAngRotDeg, GDB_RT.GLOB)
-            If EgtVerifyPart(GDB_ID.SEL, m_bReducedCut) Then Return True
-            ' Provo rotazione parziale (dopo aver annullato la complessiva)
-            EgtRotate(GDB_ID.SEL, ptCen, Vector3d.Z_AX(), -dAngRotDeg, GDB_RT.GLOB)
-            Return EgtRotatePart(GDB_ID.SEL, m_bReducedCut, ptCen, dAngRotDeg)
-         Else
-            Return False
-         End If
+         Return RotatePartInsideBond(dAngRotDeg, GDB_ID.SEL)
+      End If
+   End Function
+
+   ' verifica che la rotazione sia ammessa
+   Private Function RotatePartInsideBond(dAngRotDeg As Double, nIdMove As Integer) As Boolean
+      ' Verifico se ci sono dei pezzi bloccati in rotazione
+      Dim bLockedRot As Boolean = GetLockOnRotation(nIdMove)
+      ' Se tutti i pezzi possono ruotare
+      If Not bLockedRot Then
+         ' Calcolo il centro di rotazione come centro del cluster
+         Dim ptCen As Point3d
+         If Not EgtGetPartPartClusterCenterGlob(nIdMove, ptCen) Then Return False
+         ' Aggiorno regioni per nesting
+         UpdateNestRegions()
+         EnableReferenceRegion(False)
+         ' Verifico rotazione complessiva
+         EgtRotate(nIdMove, ptCen, Vector3d.Z_AX(), dAngRotDeg, GDB_RT.GLOB)
+         If EgtVerifyPart(nIdMove, m_bReducedCut) Then Return True
+         ' Provo rotazione parziale (dopo aver annullato la complessiva)
+         EgtRotate(nIdMove, ptCen, Vector3d.Z_AX(), -dAngRotDeg, GDB_RT.GLOB)
+         Return EgtRotatePart(nIdMove, m_bReducedCut, ptCen, dAngRotDeg)
+      Else
+         Return False
       End If
    End Function
 
@@ -1850,6 +2369,12 @@ Public Class NestPageUC
    Private Sub DragRettangle_Click() Handles DragRettanleBtn.Click
       If DragRettanleBtn.IsChecked Then
          m_bIsCheckedDragRettangle = True
+         SplitCurveWJBtn.IsChecked = False
+         ResetSplitCurvWJParam()
+         m_bIsCheckedSplitCurveWJ = False
+         StartCurveWJBtn.IsChecked = False
+         ResetStartCurvWJParam()
+         m_bIsCheckedStartCurveWJ = False
       Else
          m_bIsCheckedDragRettangle = False
          ResetDragRettangleParam()
@@ -1859,6 +2384,42 @@ Public Class NestPageUC
       EgtDraw()
    End Sub
 
+   Private Sub SplitCurveWJBtn_Click() Handles SplitCurveWJBtn.Click
+      If SplitCurveWJBtn.IsChecked Then
+         m_bIsCheckedSplitCurveWJ = True
+         DragRettanleBtn.IsChecked = False
+         m_bIsCheckedDragRettangle = False
+         StartCurveWJBtn.IsChecked = False
+         ResetStartCurvWJParam()
+         m_bIsCheckedStartCurveWJ = False
+      Else
+         m_bIsCheckedSplitCurveWJ = False
+         ' resetto i parametri di selezione dei lati
+         ResetSplitCurvWJParam()
+         m_CurrProjPage.ClearMessage()
+         ShowParkedParts()
+      End If
+      EgtDraw()
+   End Sub
+
+   Private Sub StartCurveWJBtn_Click() Handles StartCurveWJBtn.Click
+      If StartCurveWJBtn.IsChecked Then
+         m_bIsCheckedStartCurveWJ = True
+         DragRettanleBtn.IsChecked = False
+         m_bIsCheckedDragRettangle = False
+         ResetSplitCurvWJParam()
+         SplitCurveWJBtn.IsChecked = False
+         m_bIsCheckedSplitCurveWJ = False
+      Else
+         m_bIsCheckedStartCurveWJ = False
+         ' resetto i parametri di selezione dei lati
+         ResetStartCurvWJParam()
+         m_CurrProjPage.ClearMessage()
+         ShowParkedParts()
+      End If
+      EgtDraw()
+   End Sub
+
    Private Sub StorePartBtn_Click(sender As Object, e As RoutedEventArgs) Handles StorePartBtn.Click
       ' creo la lista delle famiglie di pezzi presenti in parcheggio
       GetFamilyGroupInPark()
@@ -1881,6 +2442,11 @@ Public Class NestPageUC
       EgtZoom(ZM.ALL)
    End Sub
 
+   ' ripulisco la lista dei pezzi in parcheggio
+   Friend Sub ResetListOfGruopInPark()
+      m_ListOfGroupInPark.Clear()
+   End Sub
+
    Friend Function StoreOnePart(nId As Integer, Optional ByVal bForced As Boolean = False) As Boolean
       ' Se pezzo in grezzo, metto in parcheggio (sempre possibile)
       If bForced OrElse
@@ -1958,6 +2524,10 @@ Public Class NestPageUC
       Dim dEraseArea As Double = 0
       nId = EgtGetFirstSelectedObj()
       While nId <> GDB_ID.NULL
+         '' elimino eventuali ponticelli associati al pezzo: nella vilualizzazione il percorso di lavorazioni non si muove! in attesa di gestione
+         'DeleteBridgeAssociated(nId)
+         ' Resetto i ponticelli (per ora non sono in grado di muoverli assieme ai pezzi)
+         ResetAllBRidges()
          ' Recupero indice del successivo
          Dim nNextId = EgtGetNextSelectedObj()
          ' Se abilitata cancellazione in ogni caso o pezzo non da Csv
@@ -2003,6 +2573,47 @@ Public Class NestPageUC
       EgtZoom(ZM.ALL)
    End Sub
 
+   Private Sub DeleteBridgeAssociated(nMyId As Integer)
+      ' verifico se esistono dei ponticelli associati al pezzo indicato
+      ' recuoero il gruppo di lavorazione corrente
+      Dim nIdCurrMachGroup As Integer = EgtGetCurrMachGroup()
+      ' creo il gruppo per i ponticelli
+      Dim sNameGroup As String = BRIDGES
+      Dim nIdBridgesGroup As Integer = EgtGetFirstNameInGroup(nIdCurrMachGroup, sNameGroup)
+      If nIdBridgesGroup <> GDB_ID.NULL Then
+         ' carico la prima entità del gruppo BRIDGES
+         Dim nIdBridgeLine As Integer = GDB_ID.NULL
+         nIdBridgeLine = EgtGetFirstNameInGroup(nIdBridgesGroup, BRIDGELINE)
+         ' ciclo su tutte le entità
+         While nIdBridgeLine <> GDB_ID.NULL
+            Dim nNextBridgeLine As Integer = GDB_ID.NULL
+            Dim nIdPart As Integer = GDB_ID.NULL
+            If EgtGetInfo(nIdBridgeLine, "PartStart", nIdPart) Then
+               If nIdPart = nMyId Then
+                  nNextBridgeLine = EgtGetNext(nIdBridgeLine)
+                  ' il ponticello deve essere eliminato
+                  EgtErase(nIdBridgeLine)
+                  nIdBridgeLine = nNextBridgeLine
+                  ' riparto dall'inizio del ciclo
+                  Continue While
+               End If
+            End If
+            If EgtGetInfo(nIdBridgeLine, "PartEnd", nIdPart) Then
+               If nIdPart = nMyId Then
+                  nNextBridgeLine = EgtGetNext(nIdBridgeLine)
+                  ' il ponticello deve essere eliminato
+                  EgtErase(nIdBridgeLine)
+                  nIdBridgeLine = nNextBridgeLine
+                  ' riparto dall'inizio del ciclo
+                  Continue While
+               End If
+            End If
+            ' il BridgeLine corrente non contiene riferimeti al pezzo da eliminare
+            nIdBridgeLine = EgtGetNext(nIdBridgeLine)
+         End While
+      End If
+   End Sub
+
    Private Sub SelectAllBtn_Click(sender As Object, e As RoutedEventArgs) Handles SelectAllBtn.Click
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Numero dei pezzi in tavola

CadCuts/SplitAuto.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Forms.Integration
+Imports EgtUILib
 
 Public Module SplitAuto
 
@@ -98,14 +99,15 @@ Public Module SplitAuto
                   Mach.m_dStartFreeLen = FREELEN_INF + 1
                   Mach.m_dEndFreeLen = FREELEN_INF + 1
                   Dim nEntId, nSub As Integer
-                  If EgtGetMachiningGeometry( 0, nEntId, nSub) Then
-                     If EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse EgtGetType( nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
-                     Mach.m_bEnableInvert = GetEnableInvert( nEntId)
-                     EgtMidVector( nEntId, GDB_ID.ROOT, Mach.m_vtDir)
+                  If EgtGetMachiningGeometry(0, nEntId, nSub) Then
+                     ' EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse
+                     If EgtGetType(nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
+                     Mach.m_bEnableInvert = GetEnableInvert(nEntId)
+                     EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
                      If Mach.m_bInvert Then Mach.m_vtDir = -Mach.m_vtDir
                      Mach.m_nEntId = nEntId
                   End If
@@ -131,7 +133,7 @@ Public Module SplitAuto
                      Mach.m_bStartAll = False
                      Mach.m_bEndAll = False
                   End If
-               ' Waterjet
+                  ' Waterjet
                ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then
                   Mach.m_nInterf = FMI_TYPE.NONE
                   ' recupero l'angolo di fianco
@@ -140,7 +142,7 @@ Public Module SplitAuto
                   Mach.m_bCanEndAll = False
                   Mach.m_bStartAll = False
                   Mach.m_bEndAll = False
-               ' Forature e fresature
+                  ' Forature e fresature
                Else
                   Mach.m_nInterf = FMI_TYPE.NONE
                   Mach.m_dSideAng = 0
@@ -155,7 +157,7 @@ Public Module SplitAuto
                Mach.m_bPause = GetPause(nOperId)
                ' inserisco in lista
                MachSplitList.Add(Mach)
-            ' altrimenti la disattivo
+               ' altrimenti la disattivo
             Else
                EgtSetOperationMode(nOperId, False)
             End If
@@ -193,7 +195,7 @@ Public Module SplitAuto
 
    Private Sub ColorSingleMachining(nOperId As Integer, sLay As String, dSideAng As Double, bEnabled As Boolean, nInterf As Integer)
       ' Verifico se è un taglio da sopra o da sotto
-      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or ( sLay = NAME_INLOOP AndAlso EgtExistsInfo( nOperId, INFO_FILOTOP)))
+      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or (sLay = NAME_INLOOP AndAlso EgtExistsInfo(nOperId, INFO_FILOTOP)))
       Dim bDrip As Boolean = (sLay = NAME_DRIPCUT Or sLay = NAME_UNDERDRILL)
       ' Recupero il preview della lavorazione
       Dim nPvId As Integer = GDB_ID.NULL
@@ -218,11 +220,11 @@ Public Module SplitAuto
             Next
             EgtSetColor(nDwnCutId, COL_MCH_DISABLED)
             Dim bFreeStart As Boolean = (nInterf And FMI_TYPE.LI) <> FMI_TYPE.LI
-            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
-            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
             Dim bFreeEnd As Boolean = (nInterf And FMI_TYPE.LO) <> FMI_TYPE.LO
-            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
-            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
          Else
             Dim colCut As Color3d
             If bOnMach Then
@@ -341,6 +343,7 @@ Public Module SplitAuto
       Dim ptOri As Point3d
       EgtGetTableRef(1, ptOri)
       Dim vtOri As New Vector3d(ptOri.x, ptOri.y, ptOri.z)
+      ' ---------------------------------- GREZZI ----------------------------------
       ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
       Dim nRawId As Integer = EgtGetFirstRawPart()
       While nRawId <> GDB_ID.NULL
@@ -363,6 +366,13 @@ Public Module SplitAuto
                   vNewRaws.Add(nNewRawId)
                   nNewRawId = EgtGetNextRawPart(nNewRawId)
                End While
+            Else
+               ' verifico che nella fase precedente è stato definito come sfrido, allora lo riassegno
+               Dim nVal As Integer = 0
+               EgtGetInfo(nRawId, K_ISNEWSCRAPS, nVal)
+               If nVal = 1 Or nVal = 2 Or nVal = 3 Then
+                  EgtSetInfo(nRaw1Id, K_ISNEWSCRAPS, "3")
+               End If
             End If
             ' Assegno ai nuovi grezzi eventuale texture del grezzo originale
             Dim nSolidId = EgtGetFirstNameInGroup(nRawId, NAME_RAW_SOLID)
@@ -385,10 +395,19 @@ Public Module SplitAuto
          ' passo al successivo grezzo
          nRawId = EgtGetNextRawPart(nRawId)
       End While
+      ' ---------------------------------- GREZZI ----------------------------------
       ' Cancello preview dei tagli allungati dalla lavorazione
       For Each nCut As Integer In vCuts
          RemoveMachiningPreview(nCut)
       Next
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      ChangeOperationPhase(nNewPhase)
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      Return True
+   End Function
+
+   ' Sposta le lavorzioni della fase precedente a quella indicata
+   Friend Sub ChangeOperationPhase_ERR(nNewPhase As Integer)
       ' Sposto tutte le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
       Dim nId = EgtGetFirstOperation()
       While nId <> GDB_ID.NULL
@@ -409,9 +428,50 @@ Public Module SplitAuto
          End If
          nId = nNextId
       End While
-      Return True
-   End Function
+   End Sub
 
+   ' Miglioramento della gestione delle lavorazioni
+   Friend Sub ChangeOperationPhase(nNewPhase As Integer)
+      ' creo l'elenco delle lavorazioni che devono essere sposate
+      Dim MchList As New List(Of Integer)
+      ' Recupero le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
+      Dim nId = EgtGetFirstOperation()
+      While nId <> GDB_ID.NULL
+         Dim nNextId = EgtGetNextOperation(nId)
+         If IsValidMachining(nId) And EgtGetOperationPhase(nId) = nNewPhase - 1 And EgtExistsInfo(nId, INFO_MCH_USER_OFF) Then
+            ' Provo ad inserire la lavorazione nell'elenco
+            AddMach(MchList, nId)
+            ' sposto le inglobate
+            Dim sInfo As String = String.Empty
+            If EgtGetInfo(nId, INFO_MCH_OTHMID, sInfo) Then
+               Dim sItems() As String = sInfo.Split(",".ToCharArray)
+               For Each sId2 As String In sItems
+                  Dim nId2 As Integer = 0
+                  StringToInt(sId2, nId2)
+                  If nId2 > 0 Then
+                     ' Provo ad inserire la lavorazione nell'elenco
+                     AddMach(MchList, nId2)
+                  End If
+               Next
+            End If
+         End If
+         nId = nNextId
+      End While
+      ' Procedo ora a spostare le lavorazioni nella nuova disposizione
+      For Each ItemMchId As Integer In MchList
+         EgtChangeOperationPhase(ItemMchId, nNewPhase)
+      Next
+   End Sub
+
+   ' Inserisce gli inidici delle lavorazioni evitando di inserire dei doppioni
+   Private Sub AddMach(MchList As List(Of Integer), IdMch As Integer)
+      For Each Item As Integer In MchList
+         If IdMch = Item Then
+            Return
+         End If
+      Next
+      MchList.Add(IdMch)
+   End Sub
    '-----------------------------------------------------------------------------------------------
    Friend Function CalculateSplitAuto() As Boolean
       ' Fase iniziale

CadCuts/SplitPageUC.xaml

@@ -38,7 +38,7 @@
                <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
             </Button>
             <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
+               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
                   <Image.RenderTransform>
                      <TransformGroup>
                         <RotateTransform Angle="180"/>
@@ -63,17 +63,27 @@
             <RowDefinition Height="1*"/>
          </Grid.RowDefinitions>
 
-         <ListBox Name="MachiningLsBx" Grid.Row="1" ItemTemplate="{DynamicResource NameIdLsBxItem}"
+         <ListBox Name="MachiningLsBx" Grid.Row="1"
             SelectionMode="Extended">
-            <ListBox.ItemContainerStyle>
-               <Style TargetType="ListBoxItem">
-                  <Style.Triggers>
-                     <DataTrigger Binding="{Binding bIsActive}" Value="False">
-                        <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
-                     </DataTrigger>
-                  </Style.Triggers>
-               </Style>
-            </ListBox.ItemContainerStyle>
+            <ListBox.ItemTemplate>
+               <DataTemplate>
+                  <TextBlock Text="{Binding Name}">
+                     <TextBlock.Style>
+                        <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_CurrProjSummeryTextBlock}">
+                           <Style.Triggers>
+                              <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                                 <Setter Property="TextDecorations" Value="Strikethrough"/>
+                                 <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                              </DataTrigger>
+                              <DataTrigger Binding="{Binding bIsActive}" Value="True">
+                                 <Setter Property="Foreground" Value="Black"/>
+                              </DataTrigger>
+                           </Style.Triggers>
+                        </Style>
+                     </TextBlock.Style>
+                  </TextBlock>
+               </DataTemplate>
+            </ListBox.ItemTemplate>
          </ListBox>
 
          <Grid Grid.Row="2">
@@ -101,13 +111,13 @@
             </Grid.ColumnDefinitions>
 
             <Button Name="OnOffBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource ON_OFF-singolo-taglioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+               <Image Source="{DynamicResource ON_OFF-singolo-taglioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
             <Button Name="AllOnBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Tutti-ONImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+               <Image Source="{DynamicResource Tutti-ONImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
             <Button Name="AllOffBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Tutti-OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+               <Image Source="{DynamicResource Tutti-OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
 
          </Grid>
@@ -119,17 +129,36 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-                <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-                </Button>
-                <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource Inizio-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-                </Button>
-                <Button Name="CutEndBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource Fine-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-                </Button>
+            <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            
+            <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Inizio-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
-            </Grid>
+            <Button Name="CutEndBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Fine-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+
+            <!-- solo per macchine con lavorazioni Waterjet -->
+            <ToggleButton Name="BridgesWJBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource PonticelliWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
+
+             <!--solo per macchine con lavorazioni Waterjet--> 
+            <Button Name="QualityWJBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource QualityWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            
+            <!-- solo per macchine con lavorazioni Waterjet -->
+            <ToggleButton Name="BridgesDeleteWJBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource PonticelliDeleteWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
+
+           
+
+         </Grid>
 
       </Grid>
 
@@ -152,41 +181,41 @@
 
 
          <Button Name="OutCenStartBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Inizio-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            <Image Source="{DynamicResource Inizio-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="OutCenEndBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Fine-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="ModifStartBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Modifica-InizioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="ModifEndBtn" Grid.Column="3"  Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Modifica-FineImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="InvertBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource InvertiImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="PauseBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllOutStartBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Inizio-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllCenStartBtn" Grid.Column="7" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Inizio-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllOutEndBtn" Grid.Column="8" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Fine-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllCenEndBtn" Grid.Column="9" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Fine-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllExtendBtn" Grid.Column="10" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Tutti-allungaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllReduceBtn" Grid.Column="11" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Tutti-accorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
          </Button>
-            <Button Name="OutCenEndBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Fine-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="ModifStartBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Modifica-InizioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="ModifEndBtn" Grid.Column="3"  Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Modifica-FineImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="InvertBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource InvertiImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="PauseBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="AllOutStartBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Inizio-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="AllCenStartBtn" Grid.Column="7" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Inizio-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="AllOutEndBtn" Grid.Column="8" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Fine-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="AllCenEndBtn" Grid.Column="9" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Fine-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="AllExtendBtn" Grid.Column="10" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Tutti-allungaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="AllReduceBtn" Grid.Column="11" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Tutti-accorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
 
       </Grid>
 

CadCuts/VacuumCups.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports System.Text.RegularExpressions
 
 Module VacuumCups
    ' Tipo manipolatore con ventosa (0=assente, 1=dietro, 2=laterale)
@@ -22,6 +23,10 @@ Module VacuumCups
    ' dati per rotazione ventose vicono al fine corsa Y e X
    Private bRotateVacuumNearExtraStrokeY As Boolean = False
    Private bRotateVacuumNearExtraStrokeX As Boolean = False
+   ' dati stroke
+   Public bExtraStroke As Boolean = False
+   Public ptStartPointLift As Point3d
+   Public dDegRotStartAng As Double
 
    ' Nome del gruppo temporaneo per le ventose
    Private Const VACTMP_GRP As String = "VacTmp"
@@ -62,17 +67,17 @@ Module VacuumCups
    End Function
 
    ' carico i dati macchina relativi al peso massimo movimentabile
-   Friend Sub GetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
+   Friend Sub SetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
       m_RawDensity = Density
       m_MaxWeightSinglePlugger = MaxSingle
       m_MaxWeightDoublePlugger = MaxDouble
    End Sub
 
-   Friend Sub GetRotationForExtraStrokeY(Rotate As Boolean)
+   Friend Sub SetRotationForExtraStrokeY(Rotate As Boolean)
       bRotateVacuumNearExtraStrokeY = Rotate
    End Sub
 
-   Friend Sub GetRotationForExtraStrokeX(Rotate As Boolean)
+   Friend Sub SetRotationForExtraStrokeX(Rotate As Boolean)
       bRotateVacuumNearExtraStrokeX = Rotate
    End Sub
    Friend Function GetVacuumId() As Integer
@@ -91,6 +96,8 @@ Module VacuumCups
       ' Identificativo riferimento della testa nella macchina
       Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT)
       If nT1Id = GDB_ID.NULL Then Return False
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", "H4", 1)
       ' Creo gruppo temporaneo in cui copiarli
       m_nTempId = EgtCreateGroup(GDB_ID.ROOT)
       If m_nTempId = GDB_ID.NULL Then Return False
@@ -306,6 +313,7 @@ Module VacuumCups
          Dim sCups() As String = Nothing
          Dim sCups2() As String = Nothing
          If Not GetVacuumCupSelection(nI, sCups, sCups2) Then Return False
+         bExtraStroke = False
          ' Determino validità soluzioni della configurazione
          Dim vtMove As New Vector3d
          Dim ptRotCen As New Point3d
@@ -334,6 +342,7 @@ Module VacuumCups
          Dim frCurrRef As New Frame3d
          EgtFrame(m_nRefId, GDB_ID.ROOT, frCurrRef)
          Dim vtDelta As Vector3d = frCurrRef.Orig() - ptRawCen
+
          ' Assegno dati noti al movimento del grezzo
          rmData.m_nId = nRawId
          rmData.m_vtRawMove = Vector3d.NULL()
@@ -440,24 +449,26 @@ Module VacuumCups
          dRotAngDeg = dAngOrizzDeg
          If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
          Dim dPreferredRot As Double = m_dPreferredRot
+         ' -------------------- INIZIO GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
          ' verifico l'orientamento del pezzo
-         If bRotateVacuumNearExtraStrokeX And (Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45) Then
+         If bRotateVacuumNearExtraStrokeX And Not IsHorizontal(dAngOrizzDeg) Then
             ' se l'orientamento è verticale
             If frMinRect.Orig().x < b3Tab.Center().x Then
                dPreferredRot = m_dPrefVertRotXMinus
             Else
                dPreferredRot = m_dPrefVertRotXPlus
             End If
-         ElseIf bRotateVacuumNearExtraStrokeY And (Math.Abs(dRotAngDeg - 90) > 45 Or Math.Abs(dRotAngDeg - 270) > 45) Then
+         ElseIf bRotateVacuumNearExtraStrokeY And IsHorizontal(dAngOrizzDeg) Then
             ' se l'orientemanto è orizzontale e la macchina è stata abilitata
             If frMinRect.Orig().y < b3Tab.Center().y Then
                dPreferredRot = m_dPrefVertRotYPlus
             Else
                dPreferredRot = m_dPrefVertRotYMinus
             End If
-         End If 
-         Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
-         While dRotAngDeg - dPreferredRot >= dAngDelta / 2 
+         End If
+         ' -------------------- FINE GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
+         Dim dAngDelta As Double = If(Math.Abs(b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
+         While dRotAngDeg - dPreferredRot >= dAngDelta / 2
             dRotAngDeg -= dAngDelta
          End While
          While dRotAngDeg - dPreferredRot <= -dAngDelta / 2
@@ -512,11 +523,73 @@ Module VacuumCups
       ' Applico movimento e rotazione al punto
       ptRef.Move(vtMove)
       ptRef.Rotate(ptRotCen, Vector3d.Z_AX(), dRotAngDeg)
+
+      ' -------------- INIZIO verifica di essere nel limite delle corse macchina --------------
+      If VerifyOutOfStrokes(ptRef, dRotAngDeg) <> 0 Then
+         bExtraStroke = True
+         Return INFINITO
+      End If
+      ' se la posizione è accettbaile allora salvo i dati
+      ptStartPointLift = ptRef
+      dDegRotStartAng = dRotAngDeg
+      ' -------------- FINE verifica di essere nel limite delle corse macchina --------------
+
       ' Ne calcolo la distanza dal centro della tavola
       Dim dDist As Double = Point3d.DistXY(ptRef, b3Tab.Center())
       Return dDist
    End Function
 
+   Private Function IsHorizontal(dDegAng As Double) As Boolean
+      If (Math.Abs(dDegAng) > 45 And Math.Abs(dDegAng) < 135) Or (Math.Abs(dDegAng) > 225 And Math.Abs(dDegAng) < 315) Then
+         Return False
+      End If
+      Return True
+   End Function
+
+   ' assegnate le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
+      ' Posizione Home dell'asse rotante
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      ' Corse dell'asse
+      Dim dCMin As Double
+      EgtGetAxisMin("C", dCMin)
+      Dim dCMax As Double
+      EgtGetAxisMax("C", dCMax)
+      ' Porto l'angolo nel range
+      Dim dRotAngMachDeg As Double = dRotAngDeg + dCHome
+      AdjustAngleInRange(dRotAngMachDeg, dCMin, dCMax)
+      ' Imposto la ventosa come fosse un utensile
+      EgtSetCalcTool("", "H4", 1)
+      ' Calcolo gli assi macchina
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      EgtGetCalcPositions(ptRef, dRotAngMachDeg, 0, nStat, dX, dY, dZ)
+      ' Verifico le corse
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngMachDeg, 0, nStat)
+      Return nStat
+   End Function
+
+   ' dall'informazione di extra corsa recupera il valore indicato
+   Public Function GetExtraStrokeValue(sInfo As String) As Double
+      Dim dExtraStroke As Double = 0
+      Dim sItems As String() = sInfo.Split("="c)
+      If sItems.Count = 2 Then
+         Dim nStartIndex As Integer = 0
+         For Each ItemChar As Char In sItems(1)
+            If ItemChar = "("c Then
+               Exit For
+            End If
+            nStartIndex += 1
+         Next
+         If nStartIndex > 0 Then
+            Dim sValue As String = sItems(1).Remove(nStartIndex, sItems(1).Count - nStartIndex)
+            StringToLen(sValue, dExtraStroke)
+         End If
+      End If
+      Return dExtraStroke
+   End Function
+
    Private Function TestVacuumCups(nCups() As Integer, nRawRegId As Integer,
                                    vtMove As Vector3d, ptRotCen As Point3d, dRotAngDeg As Double) As Boolean
       ' Eseguo verifica delle ventose rispetto al grezzo
@@ -537,7 +610,8 @@ Module VacuumCups
       Return bVacOk
    End Function
 
-   Private Function GetPluggerFromCameras(sCups) As Integer
+   ' dato il vettore delle camere restituisco il quali attuatori sono coinvolti
+   Private Function GetPluggerFromCameras(sCups() As String) As Integer
       Dim nCountPlunger As Integer = 1
       Dim bPlugger1 As Boolean = False
       Dim bPlugger2 As Boolean = False

Constants/ConstGen.vb

@@ -187,6 +187,10 @@ Module ConstGen
    Public Const INFO_TOTAREA As String = "TotArea"
    ' Info per area da produrre dei pezzi del progetto
    Public Const INFO_TOPRODAREA As String = "ToProdArea"
+   ' Info per nome progetti
+   Public Const INFO_PROJNAME As String = "ProjName"
+   ' Info per parcheggio asse C
+   Public Const INFO_CAXESHOME As String = "CAxesHome"
 
    ' Nome layer delle regioni
    Public Const NAME_REGION As String = "Region"
@@ -212,7 +216,8 @@ Module ConstGen
    Public Const INFO_DEPTH As String = "Depth"
    Public Const INFO_WIDTH As String = "Width"
    Public Const INFO_DEPTH2 As String = "Depth2"
-   Public CONST INFO_AGG2 As String = "Agg2"
+   Public Const INFO_AGG2 As String = "Agg2"
+   Public Const INFO_ROUNDOFF As String = "RoundOff"
    ' Info in entità da tagliare per taglio ristretto
    Public Const INFO_STRICT As String = "Strict"
    ' Info in entità da tagliare per angolo di lato e tallone
@@ -302,6 +307,12 @@ Module ConstGen
    Public Const INFO_PARTOK As String = "POK"
    ' Info in pezzo per stato rotazione
    Public Const INFO_PARTROT As String = "ROT"
+   ' Info in entità in OutLoop per indicare se è separata WaterJet
+   Public Const INFO_JOINENTITY As String = "JoinEntity"
+   ' Nome layer per "*" inidcanti un lato separato nel taglio WaterJet
+   Public Const INFO_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
+   ' Info in OutLoop per punto inzio lavorazione WaterJet
+   Public Const INFO_START As String = "Start"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"
@@ -334,6 +345,11 @@ Module ConstGen
    ' Info in pezzo per facet di ultima superficie selezionata
    Public Const INFO_FRAME_FACET As String = "Facet"
 
+   ' Nome del groppo dei ponticelli per lavorazioni Water
+   Public Const BRIDGES As String = "Bridges"
+   ' Nome dell'entità ponticello contenuta nel gruppo BRIDGES
+   Public Const BRIDGELINE As String = "BridgeLine"
+
    ' utensile per le lavorazioni manuali
    Public Const DUMMY_SAW As String = "DummySAW"
    ' lavorazione manuale
@@ -377,6 +393,9 @@ Module ConstGen
    Public Function COL_MCH_DRIPCUT() As Color3d
       Return New Color3d(255, 0, 165)
    End Function
+   Public Function COL_MCH_ONENGRAVE_ANG() As Color3d
+      Return New Color3d(255, 255, 100)
+   End Function
    Public Function COL_MCH_DRIPFREE() As Color3d
       Return New Color3d(192, 0, 128)
    End Function

Constants/ConstIni.vb

@@ -18,6 +18,7 @@ Module ConstIni
    Public Const S_GENERAL As String = "General"
    Public Const K_DEBUG As String = "Debug"
    Public Const K_LICENCE As String = "Licence"
+   Public Const K_NETKEY As String = "NetKey"
    Public Const K_MESSAGESDIR As String = "MessagesDir"
    Public Const K_MESSAGES As String = "Messages"
    Public Const K_SUPPORT As String = "Support"
@@ -46,6 +47,12 @@ Module ConstIni
    Public Const K_THEME As String = "Theme"
    Public Const K_MANUAL_CUT As String = "ManualCut"
    Public Const K_TEST As String = "Test"
+   Public Const K_SMARTMACHININGPAGE As String = "SmartMachiningPage"
+   Public Const K_STARTPROGRAM As String = "StartProgram"
+   Public Const K_GENERATECN As String = "GenerateCN"
+   Public Const K_FRACTIONPATTERN As String = "FractionPattern"
+   Public Const K_PRECISION As String = "Precision"
+
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"
@@ -109,6 +116,8 @@ Module ConstIni
    Public Const K_LASTCOLOR As String = "LastColor"
    Public Const K_COLOR As String = "Color"
 
+   Public Const S_FRAMECOMPO As String = "FrameCompo"
+
    Public Const S_EXTCOMPO As String = "Compo"
 
    Public Const S_INTCOMPO As String = "InternalCompo"
@@ -129,7 +138,9 @@ Module ConstIni
    Public Const K_ENGRAVENUMBER2 As String = "EngraveNumber2"
    Public Const K_ENGRAVEOFFSET2 As String = "EngraveOffset2"
    Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
+   Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
    Public Const K_ENGRAVESHORT As String = "EngraveShort"
+   Public Const K_ENGRAVEANGLE As String = "EngraveAngle"
    Public Const K_DRIPOFFSET As String = "DripOffset"
    Public Const K_DRIPOFFSET2 As String = "DripOffset2"
    Public Const K_DRIPDEPTH As String = "DripDepth"
@@ -137,6 +148,7 @@ Module ConstIni
    Public Const K_UNDERDRILLDEPTH As String = "UnderDrillDepth"
    Public Const K_FILOTOPOFFSET As String = "FiloTopOffset"
    Public Const K_FILOTOPDEPTH As String = "FiloTopDepth"
+   Public Const K_ROUNDOFF As String = "RoundOff"
 
    Public Const S_NEST As String = "Nest"
    Public Const K_DIRECT As String = "Direct"
@@ -149,6 +161,7 @@ Module ConstIni
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
    Public Const K_DRAG_RETTANGLE As String = "DragRectangle"
+   Public Const K_STARTENDMODIFYONINTCORNER As String = "StartEndModifyOnIntCorner"
 
    Public Const S_SPLIT As String = "Split"
    Public Const K_MOVE_LEV As String = "MoveLevel"
@@ -164,6 +177,14 @@ Module ConstIni
    Public Const K_CSVCURRDIR As String = "CurrDir"
    Public Const K_CSVLASTFILE As String = "LastFile"
 
+   Public Const S_TRF As String = "TRF"
+   Public Const K_ORDCODE As String = "OrdCode"
+   Public Const K_ORDDESC As String = "OrdDesc"
+   Public Const K_PARTCODE As String = "PartCode"
+   Public Const K_MATCODE As String = "MatCode"
+   Public Const K_SURFCODE As String = "SurfCode"
+   Public Const K_TRFTHICKNESS As String = "TrfThickness"
+
    Public Const S_SLABDXF As String = "SlabDxf"
    Public Const K_IMPORTSLABDXF As String = "ImportSlabDxf"
    Public Const K_SLABLAYER As String = "SlabLayer"
@@ -185,6 +206,7 @@ Module ConstIni
    Public Const K_OFFSZ As String = "OffsZ"
    Public Const K_OFFSXY As String = "OffsXY"
    Public Const K_OFFSYY As String = "OffsYY"
+   Public Const K_OFFSXINTERY As String = "OffsYInterY"
    Public Const K_STARTTRIM As String = "StartTrim"
    Public Const K_ENDTRIM As String = "EndTrim"
    Public Const K_OTHERSIDE As String = "OtherSide"
@@ -204,12 +226,27 @@ Module ConstIni
    Public Const K_RAWOFFSX As String = "OffsX"
    Public Const K_RAWOFFSY As String = "OffsY"
    Public Const K_RAWKERF As String = "Kerf"
+   Public Const K_ENABLEOTHERREFTAB As String = "EnableOtherRefTab"
+   Public Const K_OTHERREFTAB As String = "OtherRefTab"
+   Public Const K_OTHERREFTABX As String = "OtherRefTabX"
+   Public Const K_OTHERREFTABY As String = "OtherRefTabY"
+   Public Const K_OTHERREFTABPOS As String = "OtherRefTabPos"
+
 
    Public Const S_RAWMOVE As String = "RawMove"
    Public Const K_RAWSTEP As String = "Step"
    Public Const K_RAWROTATION As String = "Rotation"
    Public Const K_PERPENDICULAR As String = "Perpendicular"
 
+   Public Const S_SCRAPS As String = "Scraps"
+   Public Const K_ENABLESCRAPS As String = "EnableScraps"
+   Public Const K_PHOTODIR As String = "PhotoDir"
+   Public Const K_LASTBLOCK As String = "LastBlock"
+   Public Const K_TEMPLATE As String = "Template"
+   Public Const K_DAT As String = "Dat"
+   Public Const K_ZEBRAUTILITIES As String = "ZebraUtilities"
+   Public Const K_ENABLE_PRINTER As String = "EnablePrinter"
+
    Public Const S_REG As String = "Reg"
    Public Const K_REGSTEP As String = "Step"
    Public Const K_REGANGSTEP As String = "AngStep"
@@ -302,6 +339,9 @@ Module ConstIni
    Public Const K_DC_TEST_LENGTH As String = "TestLength"
    Public Const K_DC_TEST_ANGH As String = "TestAngH"
    Public Const K_DC_TEST_OFFSET As String = "TestOffset"
+   Public Const K_DC_OFFSET_SQUARING As String = "OffsetSquaring"
+   Public Const K_DC_EXTRA_LEN_SQUARING As String = "ExtraLenSquaring"
+   Public Const K_ENABLEINVERT As String = "EnableInvert"
 
    Public Const S_STATDATA As String = "StatData"
    Public Const K_SD_DAY As String = "Day"

Constants/ConstMachIni.vb

@@ -46,6 +46,16 @@
    Public Const K_THREADSLEEP As String = "ThreadSleep"
    Public Const K_PHOTODELEY As String = "PhotoDeley"
 
+   Public Const S_NCFANUC As String = "NcFanuc"
+   Public Const K_SETNCMODE As String = "SetNcMode"
+   Public Const K_BASEADDRINT As String = "BaseAddrInt"
+   Public Const K_BASEADDRBIT As String = "BaseAddrBit"
+   Public Const K_NUMVARINT As String = "NumVarInt"
+   Public Const K_NUMVARBIT As String = "NumVarBit"
+
+   Public Const S_EXECLUA As String = "ExecLua"
+   Public Const K_FILESCRIPT_LUA As String = "FileScript"
+
    Public Const S_NCDATA As String = "NcData"
    Public Const K_NEWVARIABLE As String = "NewVariable"
    Public Const K_NEWCONSOLE As String = "NewConsole"
@@ -75,6 +85,7 @@
    Public Const K_TABLEDOWN As String = "TableDown"
    Public Const K_MANUAL As String = "Manual"
    Public Const K_DOORCLOSED As String = "DoorClosed"
+   Public Const K_DOOROPENDED As String = "DoorOpened"
    Public Const K_LIMITZ As String = "LimitZ"
    Public Const K_POWEROVR As String = "PowerOvr"
    Public Const K_PARKING As String = "Parking"
@@ -109,6 +120,7 @@
    Public Const K_FEEDHOLD As String = "FeedHold"
    Public Const K_SPOTLIGHT1 As String = "SpotLight1"
    Public Const K_SPOTLIGHT2 As String = "SpotLight2"
+   Public Const K_NAXES As String = "nAxes"
    ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
    Public Const K_XYJOG As String = "XYJog"
@@ -139,6 +151,10 @@
    Public Const K_PRODLIPROBINGTCPOS2VAR As String = "ProbingTcPos2Var"
    Public Const K_PRODLISAWDIAMETER2VAR As String = "SawDiameter2Var"
 
+   Public Const S_POLISHLINE As String = "PolishLine"
+   Public Const K_CLICKSTATE As String = "ClickState"
+   Public Const k_CLICKDIR As String = "ClickDir"
+
    Public Const S_STATISTICS As String = "Stats"
    Public Const K_DATADIR As String = "DataDir"
    Public Const K_SHOWAREAS As String = "ShowAreas"
@@ -216,6 +232,11 @@
    Public Const K_MACH_CUTFSEVLEN As String = "CutFsevLen"
    Public Const K_MACH_CUTFSEVPERC As String = "CutFsevPerc"
    Public Const K_USELASERORIGIN As String = "UseLaserOrigin"
+   Public Const K_HOLES_DIAMITERWJ As String = "HolesDiameterWJ"
+   Public Const K_HOLES_OFFSETWJ As String = "HolesOffsetWJ"
+   Public Const K_MIN_RADIUSWJ As String = "MinRadiusWJ"
+   Public Const K_MACH_DRILLINGWJ_ON_CORNERS As String = "DrillingWJOnCorners"
+   Public Const K_MACH_RECTIFICATION_ON_SUBSQUARE As String = "RectificationSubSqWJ"
    ' DrillMillC90
    ' CutLongDxSx
    ' AngRotMultiCut
@@ -233,6 +254,9 @@
    Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEY As String = "RotateVacuumForExtraStrokeY"
    Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEX As String = "RotateVacuumForExtraStrokeX"
 
+   Public Const K_ISNEWSCRAPS As String = "IsNewScraps"
+   Public Const K_DATABASEID As String = "DatabaseID"
+
    Public Const S_MACH_REG As String = "Reg"
    Public Const K_MACH_MAX_ROT_ANG As String = "MaxRotAng"
 
@@ -260,6 +284,7 @@
    Public Const S_MACH_PROBING As String = "Probing"
    Public Const K_PROBINGSTATEVAR As String = "ProbingStateVar"
    Public Const K_SAWDIAMETER As String = "SawDiameter"
+   Public Const K_TOOLLENGTH As String = "ToolLength"
    Public Const K_RAWTHICKNESS As String = "RawThickness"
    Public Const K_ENABLERAWPROBE As String = "EnableRawProbe"
 

DirectCuts/ControlsDirectCutUC.xaml

@@ -0,0 +1,177 @@
+<UserControl x:Class="ControlsDirectCutUC"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             DataContext="Self"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:OmagCUT="clr-namespace:OmagCUT"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
+
+   <Grid Name="LeftButtonGrid" Grid.Row="1" >
+      <Grid.RowDefinitions>
+         <!--<RowDefinition Height="1*"/>
+            <RowDefinition Height="7*"/>-->
+         <RowDefinition Height="9*"/>
+      </Grid.RowDefinitions>
+      <!-- Definizione della Grid laterale -->
+      <Grid Name="CutTypeGrid" Grid.Row="1" >
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <!--<RowDefinition Height="1*"/>-->
+         </Grid.RowDefinitions>
+         <Button Name="ManualBtn" Grid.Column="2" Grid.Row="0"                    
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Movimento-manualeImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="ManualTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="SingleCutBtn" Grid.Row="1"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-singoloImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SingleCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="MultipleCutBtn" Grid.Row="2"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-multiploImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="MultipleCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="GridCutBtn" Grid.Row="3"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-grigliaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="GridCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+
+         <Button Name="SingleDrillBtn" Grid.Row="4"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Foro-singoloImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SingleDrillTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="FlatteningCutBtn" Grid.Row="5"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource SpianaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="FlatteningCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <!--<Button Name="PolishingBtn" Grid.Row="6"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="PolishingTxt" Grid.Column="1"
+                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>-->
+
+         <!--<Button Name="CopyTemplateBtn" Grid.Row="7"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>-->
+
+         <Button Name="SquaringBtn" Grid.Row="6"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SquaringTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <!--<Button Name="SawTestBtn" Grid.Row="6"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="80"/>
+                        <ColumnDefinition Width="140"/>
+                    </Grid.ColumnDefinitions>
+                    <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                    <TextBlock Name="SawTestTxt" Grid.Column="1"
+                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                </Grid>
+            </Button>-->
+
+         <Grid Name="ChangeUCGrid" Grid.Row="7">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="ChangeUCBtn" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Grid>
+                  <!--<Image Name="ImageCompo9" Source="{DynamicResource NumericKeyboardArrowImg}" />-->
+                  <TextBlock Name="ChangeUCTxBl" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+               </Grid>
+            </Button>
+         </Grid>
+
+      </Grid>
+   </Grid>
+</UserControl>

DirectCuts/ControlsDirectCutUC.xaml.vb

@@ -0,0 +1,265 @@
+Imports EgtUILib
+Public Class ControlsDirectCutUC
+
+   ' Dichiarazione delle Page UserControl
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   ' ---- MAI USATA ---- nuova finestra per i comandi per il taglio manuale nuovo
+   Friend m_SingleCutAuto As SingleCutAuto
+   ' ---- MAI USATA ----
+   Friend m_MachineButtons As MachineButtonsUC
+   Friend m_ManualAxesMove As ManualAxesMoveUC
+   Friend m_SingleCut As SingleCutUC
+   Friend m_SingleDrill As SingleDrillUC
+   Friend m_MultipleCut As MultipleCut
+   Friend m_GridCut As GridCut
+   Friend m_FlatteningCut As FlatteningCut
+   Friend m_Squaring As SquaringUC
+   Friend m_ControlsMachineButton As ControlsMachineButtonUC
+   Friend m_VacuumMachineButton As VacuumMachineButtonUC
+
+   Friend m_ControlDirectCutPage1 As ControlsDirectCutUC1
+
+   ' Stato di visualizzazione della macchina
+   Friend m_bShowMachine As Boolean = False
+   Friend m_nMachLook As Integer = MCH_LOOK.ALL
+   ' Dati generali CN
+   Friend m_CN As CN_generico
+   Private m_bFirst As Boolean = True
+   ' Riferimento alla pagina correntemente attiva
+   Friend m_ActiveDirectCutPage As DirectCutPages = DirectCutPages.DirectCut
+   ' Variabili che indicano attivazione paginette con bottoni macchina
+   Private m_ControlsBtn_IsActive As Boolean
+
+   Public Shared m_dZSafe As Double = 52
+
+   ' Variabile che indica se sono attivi i bottoni macchina nuovi o vecchi
+   Friend m_NewMachineButtonsType As Boolean
+   ' Indica che la finestra del talio Singolo deve essere di tipo manuale
+   Friend m_bManulaCut As Boolean = False
+
+   ' elenco dei nuovi bottoni
+   Private m_ButtonJogList As New List(Of MachineButton)
+
+   Enum DirectCutPages
+      ' pagina principale di tagli diretti
+      DirectCut
+      ' nuova pagina di tagli diretti
+      DirectCut1
+      ' elenco dei comandi associati
+      ManualAxesMove
+      SingleCut
+      MultipleCut
+      GridCut
+      FlatteningCut
+      Polishing
+      CopyTemplate
+      SawTest
+      SingleCutAuto
+      SingleDrill
+      Squaring
+   End Enum
+
+   Private Sub ControlsDirectCutUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' leggo la configurazione del programma per i nuovi tagli manuali
+      m_bManulaCut = GetPrivateProfileInt(S_GENERAL, K_MANUAL_CUT, 0, m_MainWindow.GetIniFile()) <> 0
+
+      'Creazione delle Page UserControl
+      m_MachineButtons = New MachineButtonsUC
+      m_ManualAxesMove = New ManualAxesMoveUC
+      m_SingleCut = New SingleCutUC
+      m_SingleDrill = New SingleDrillUC
+      m_MultipleCut = New MultipleCut
+      m_GridCut = New GridCut
+      m_FlatteningCut = New FlatteningCut
+      m_Squaring = New SquaringUC
+      m_ControlsMachineButton = New ControlsMachineButtonUC
+      m_VacuumMachineButton = New VacuumMachineButtonUC
+      ' reiferimento alla pagina succesiva
+      m_ControlDirectCutPage1 = New ControlsDirectCutUC1
+      ' Costruisco la finestra per il nuovo tipo di taglio manuale
+      m_SingleCutAuto = New SingleCutAuto
+
+      'Posizionemento nella griglia delle Page UserControl DirectCutPageUC
+      m_MachineButtons.SetValue(Grid.RowProperty, 2)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 7)
+      m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
+      If m_bManulaCut Then
+         m_SingleCutAuto.SetValue(Grid.RowProperty, 1)
+      Else
+         m_SingleCut.SetValue(Grid.RowProperty, 1)
+      End If
+      m_SingleDrill.SetValue(Grid.RowProperty, 1)
+      m_MultipleCut.SetValue(Grid.RowProperty, 1)
+      m_GridCut.SetValue(Grid.RowProperty, 1)
+      m_FlatteningCut.SetValue(Grid.RowProperty, 1)
+      m_Squaring.SetValue(Grid.RowProperty, 1)
+      m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
+      m_VacuumMachineButton.SetValue(Grid.RowProperty, 1)
+
+      ' ManualBtn.Content = EgtMsg(90201)
+      ManualTxt.Text = EgtMsg(90201)
+      'SingleCutBtn.Content = EgtMsg(90202)
+      SingleCutTxt.Text = EgtMsg(90202)
+      'SingleDrillBtn.Content = "Foro singolo"
+      SingleDrillTxt.Text = EgtMsg(90258)
+      'MultipleCutBtn.Content = EgtMsg(90203)
+      MultipleCutTxt.Text = EgtMsg(90203)
+      'GridCutBtn.Content = EgtMsg(90204)
+      GridCutTxt.Text = EgtMsg(90204)
+      'FlatteningCutBtn.Content = EgtMsg(90206)
+      FlatteningCutTxt.Text = EgtMsg(90206)
+      ' 90261=Squaring
+      SquaringTxt.Text = EgtMsg(90261)
+      ' 90409=Others
+      ChangeUCTxBl.Text = EgtMsg(90409)
+
+   End Sub
+
+   Private Sub ControlsDirectCutUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      ' Se rientro da simulazione
+      If m_ActiveDirectCutPage = DirectCutPages.SingleCut Then
+         LeftButtonGrid.Children.Add(m_SingleCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto Then
+         LeftButtonGrid.Children.Add(m_SingleCutAuto)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.MultipleCut Then
+         LeftButtonGrid.Children.Add(m_MultipleCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.GridCut Then
+         LeftButtonGrid.Children.Add(m_GridCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.FlatteningCut Then
+         LeftButtonGrid.Children.Add(m_FlatteningCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleDrill Then
+         LeftButtonGrid.Children.Add(m_SingleDrill)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.Squaring Then
+         LeftButtonGrid.Children.Add(m_Squaring)
+         Return
+      End If
+
+      If m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.MachineButtonUC Or
+         m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.VacuumButtonUC Then
+         ' Caso standard
+         m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      End If
+
+      ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
+      Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
+      Dim bH1Exists As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+
+      ManualBtn.IsEnabled = bH1Exists
+      ' sviluppo rimasto in sospeso
+      If m_bManulaCut Then
+         ' anche se non è presente un grezzo mantengo abilitato il bottone
+         SingleCutBtn.IsEnabled = True
+      Else
+         SingleCutBtn.IsEnabled = bRawOk
+      End If
+      MultipleCutBtn.IsEnabled = bRawOk
+      GridCutBtn.IsEnabled = bRawOk
+      SingleDrillBtn.IsEnabled = (bRawOk And bH1Exists)
+      FlatteningCutBtn.IsEnabled = (bRawOk And bH1Exists)
+      SquaringBtn.IsEnabled = bRawOk
+
+      ' aggiorno la visualizzazione dei parametri
+      ReloadParam()
+
+      ' Nascondo i pezzi in parcheggio
+      HideParkedParts()
+      EgtZoom(ZM.ALL)
+
+   End Sub
+
+   ' ricarico i parametri utensili per definizione 
+   Public Sub ReloadParam()
+      Dim sCurrSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sCurrSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim bSaw As Boolean = False
+
+      ' se esiste una lavorazione di lama corrente vuol dire che deve essere preferita
+      If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
+         bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
+      End If
+      m_SingleCut.SetEnableParam(bSaw)
+      m_MultipleCut.SetEnableParam(bSaw)
+      m_GridCut.SetEnableParam(bSaw)
+   End Sub
+
+#Region "COMMAND CLICK BTN"
+
+   Private Sub ManualBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualBtn.Click
+      LeftButtonGrid.Children.Add(m_ManualAxesMove)
+      m_ActiveDirectCutPage = DirectCutPages.ManualAxesMove
+   End Sub
+
+   Private Sub SingleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleCutBtn.Click
+      If m_bManulaCut Then
+         LeftButtonGrid.Children.Add(m_SingleCutAuto)
+         m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto
+      Else
+         LeftButtonGrid.Children.Add(m_SingleCut)
+         m_ActiveDirectCutPage = DirectCutPages.SingleCut
+      End If
+
+   End Sub
+
+   Private Sub MultipleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles MultipleCutBtn.Click
+      LeftButtonGrid.Children.Add(m_MultipleCut)
+      m_ActiveDirectCutPage = DirectCutPages.MultipleCut
+   End Sub
+
+   Private Sub GridCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles GridCutBtn.Click
+      LeftButtonGrid.Children.Add(m_GridCut)
+      m_ActiveDirectCutPage = DirectCutPages.GridCut
+   End Sub
+
+   Private Sub FlatteningCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles FlatteningCutBtn.Click
+      LeftButtonGrid.Children.Add(m_FlatteningCut)
+      m_ActiveDirectCutPage = DirectCutPages.FlatteningCut
+   End Sub
+
+   Private Sub SquaringBtn_Click(sender As Object, e As RoutedEventArgs) Handles SquaringBtn.Click
+      LeftButtonGrid.Children.Add(m_Squaring)
+      m_ActiveDirectCutPage = DirectCutPages.Squaring
+   End Sub
+
+   Private Sub SingleDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleDrillBtn.Click
+      LeftButtonGrid.Children.Add(m_SingleDrill)
+      m_ActiveDirectCutPage = DirectCutPages.SingleDrill
+   End Sub
+
+   ' cambio pagina
+   Private Sub ChangeUCBtn_Click(sender As Object, e As RoutedEventArgs) Handles ChangeUCBtn.Click
+      DirectCutPage_Unloaded(Nothing, Nothing)
+      m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      m_MainWindow.m_DirectCutPageUC.LoadDirectCutUC1()
+   End Sub
+
+#End Region    ' Command Click Btn
+
+
+   Friend Sub DirectCutPage_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      Select Case m_ActiveDirectCutPage
+         Case DirectCutPages.DirectCut Or DirectCutPages.ManualAxesMove
+            ' Non è necessario fare alcunché
+         Case DirectCutPages.SingleCut
+            LeftButtonGrid.Children.Remove(m_SingleCut)
+         Case DirectCutPages.SingleCutAuto
+            LeftButtonGrid.Children.Remove(m_SingleCutAuto)
+         Case DirectCutPages.MultipleCut
+            LeftButtonGrid.Children.Remove(m_MultipleCut)
+         Case DirectCutPages.GridCut
+            LeftButtonGrid.Children.Remove(m_GridCut)
+         Case DirectCutPages.FlatteningCut
+            LeftButtonGrid.Children.Remove(m_FlatteningCut)
+         Case DirectCutPages.SingleDrill
+            LeftButtonGrid.Children.Remove(m_SingleDrill)
+         Case DirectCutPages.Squaring
+            LeftButtonGrid.Children.Remove(m_Squaring)
+      End Select
+   End Sub
+
+End Class

DirectCuts/ControlsDirectCutUC1.xaml

@@ -0,0 +1,86 @@
+<UserControl x:Class="ControlsDirectCutUC1"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             DataContext="Self"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:OmagCUT="clr-namespace:OmagCUT"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
+
+   <Grid Name="LeftButtonGrid" Grid.Row="1" >
+      <Grid.RowDefinitions>
+         <!--<RowDefinition Height="1*"/>
+            <RowDefinition Height="7*"/>-->
+         <RowDefinition Height="9*"/>
+      </Grid.RowDefinitions>
+      <!-- Definizione della Grid laterale -->
+      <Grid Name="CutTypeGrid" Grid.Row="1" >
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <!--<RowDefinition Height="1*"/>-->
+         </Grid.RowDefinitions>
+
+         <Button Name="SawTestBtn" Grid.Row="0"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SawTestTxt" Grid.Column="1"
+                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="PolishingBtn" Grid.Row="1"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="PolishingTxt" Grid.Column="1"
+                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="CopyTemplateBtn" Grid.Row="2"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Grid Name="ChangeUC1Grid" Grid.Row="7">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="ChangeUC1Btn" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Grid>
+                  <Image Name="ImageCompo9" Source="{DynamicResource NumericKeyboardArrowImg}" />
+                  <!--<TextBlock Name="LabelCompo9" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>-->
+               </Grid>
+            </Button>
+         </Grid>
+
+      </Grid>
+   </Grid>
+</UserControl>

DirectCuts/ControlsDirectCutUC1.xaml.vb

@@ -0,0 +1,142 @@
+Imports EgtUILib
+Public Class ControlsDirectCutUC1
+
+   ' Dichiarazione delle Page UserControl
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Friend m_Polishing As Polishing
+   Friend m_CopyTemplate As CopyTemplateUC
+   Friend m_SawTest As SawTestUC
+
+   ' Stato di visualizzazione della macchina
+   Friend m_bShowMachine As Boolean = False
+   Friend m_nMachLook As Integer = MCH_LOOK.ALL
+   ' Dati generali CN
+   Friend m_CN As CN_generico
+   Private m_bFirst As Boolean = True
+   ' Riferimento alla pagina correntemente attiva
+   Friend m_ActiveDirectCutPage As DirectCutPages = DirectCutPages.DirectCut
+   ' Variabili che indicano attivazione paginette con bottoni macchina
+   Private m_ControlsBtn_IsActive As Boolean
+
+   Public Shared m_dZSafe As Double = 52
+
+   ' Variabile che indica se sono attivi i bottoni macchina nuovi o vecchi
+   Friend m_NewMachineButtonsType As Boolean
+   ' Indica che la finestra del talio Singolo deve essere di tipo manuale
+   Friend m_bManulaCut As Boolean = False
+
+   Enum DirectCutPages
+      DirectCut
+      DirectCut1
+      Polishing
+      CopyTemplate
+      SawTest
+   End Enum
+
+   Private Sub ControlsDirectCutUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' leggo la configurazione del programma per i nuovi tagli manuali
+      m_bManulaCut = GetPrivateProfileInt(S_GENERAL, K_MANUAL_CUT, 0, m_MainWindow.GetIniFile()) <> 0
+
+      'Creazione delle Page UserControl
+      m_SawTest = New SawTestUC
+      m_Polishing = New Polishing
+      m_CopyTemplate = New CopyTemplateUC
+
+      'Posizionemento nella griglia delle Page UserControl
+      m_SawTest.SetValue(Grid.RowProperty, 1)
+      m_Polishing.SetValue(Grid.RowProperty, 1)
+      m_CopyTemplate.SetValue(Grid.RowProperty, 1)
+
+      ' assegno i nomi ai pulsanti
+      SawTestTxt.Text = EgtMsg(90207)
+      PolishingTxt.Text = EgtMsg(90231)
+      'CopyTemplateBtn.Content = EgtMsg(90209)
+      CopyTemplateTxt.Text = EgtMsg(90209)
+      'SquaringTxt.Text = "Squaring"
+
+   End Sub
+
+   Private Sub ControlsDirectCutUC1_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      ' Se rientro da simulazione
+      If m_ActiveDirectCutPage = DirectCutPages.SawTest Then
+         LeftButtonGrid.Children.Add(m_SawTest)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.CopyTemplate Then
+         Me.LeftButtonGrid.Children.Add(m_CopyTemplate)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.Polishing Then
+         Me.LeftButtonGrid.Children.Add(m_Polishing)
+         Return
+      End If
+
+      ' Caso standard
+      m_ActiveDirectCutPage = DirectCutPages.DirectCut1
+
+      ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
+      Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
+      Dim bH1Exists As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+
+      PolishingBtn.IsEnabled = (bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
+      SawTestBtn.IsEnabled = (bRawOk And bH1Exists)
+      CopyTemplateBtn.IsEnabled = bH1Exists
+
+      ' aggiorno la visualizzazione dei parametri
+      ReloadParam()
+
+      ' Nascondo i pezzi in parcheggio
+      HideParkedParts()
+      EgtZoom(ZM.ALL)
+
+   End Sub
+
+   ' ricarica i dati utensili
+   Public Sub ReloadParam()
+      Dim sCurrSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sCurrSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim bSaw As Boolean = False
+
+      ' se esiste una lavorazione di lama corrente vuol dire che deve essere preferita
+      If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
+         bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
+      End If
+      'm_SingleCut.SetEnableParam(bSaw)
+      'm_MultipleCut.SetEnableParam(bSaw)
+      'm_GridCut.SetEnableParam(bSaw)
+   End Sub
+
+#Region "COMMAND CLICK BTN"
+   Private Sub SawTestBtn_Click(sender As Object, e As RoutedEventArgs) Handles SawTestBtn.Click
+      LeftButtonGrid.Children.Add(m_SawTest)
+      m_ActiveDirectCutPage = DirectCutPages.SawTest
+   End Sub
+
+   Private Sub PolishingBtn_Click(sender As Object, e As RoutedEventArgs) Handles PolishingBtn.Click
+      LeftButtonGrid.Children.Add(m_Polishing)
+      m_ActiveDirectCutPage = DirectCutPages.Polishing
+   End Sub
+
+   Private Sub CopyTemplateBtn_Click(sender As Object, e As RoutedEventArgs) Handles CopyTemplateBtn.Click
+      LeftButtonGrid.Children.Add(m_CopyTemplate)
+      m_ActiveDirectCutPage = DirectCutPages.CopyTemplate
+   End Sub
+
+   Private Sub ChangeUC1Btn_Click(sender As Object, e As RoutedEventArgs) Handles ChangeUC1Btn.Click
+      DirectCutPage_Unloaded(Nothing, Nothing)
+      m_ActiveDirectCutPage = DirectCutPages.DirectCut1
+      m_MainWindow.m_DirectCutPageUC.LoadDirectCutUC()
+   End Sub
+
+#End Region    ' Command Click Btn
+
+   Friend Sub DirectCutPage_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      Select Case m_ActiveDirectCutPage
+         Case DirectCutPages.SawTest
+            LeftButtonGrid.Children.Remove(m_SawTest)
+         Case DirectCutPages.Polishing
+            LeftButtonGrid.Children.Remove(m_Polishing)
+         Case DirectCutPages.CopyTemplate
+            LeftButtonGrid.Children.Remove(m_CopyTemplate)
+      End Select
+   End Sub
+
+End Class

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -76,6 +76,11 @@ Public Class ControlsMachineButtonUC
       End If
    End Sub
 
+#Region "STATE CHANGED"
+   ' ------------------------------------------------------------------------------
+   ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
+   '-------------------------------------------------------------------------------
+
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim SpindleButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
@@ -255,38 +260,34 @@ Public Class ControlsMachineButtonUC
       Dim DoorOpenedButton As ThreeStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_DOORCLOSED Then
-            'If TypeOf MachineButton Is NoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, NoStateButton)
-            'ElseIf TypeOf MachineButton Is TwoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, TwoStateButton)
-            'ElseIf TypeOf MachineButton Is ThreeStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, ThreeStateButton)
-            'ElseIf TypeOf MachineButton Is DoubleCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, DoubleCommandButton)
-            'ElseIf TypeOf MachineButton Is PressedCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, PressedCommandButton)
-            'End If
             DoorClosedButton = MachineButton
          End If
-         If MachineButton.StateFlag = "DoorOpened" Then
+         If MachineButton.StateFlag = K_DOOROPENDED Then
             DoorOpenedButton = MachineButton
          End If
       Next
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorClosedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_Red")
             Case 1, 2
+               ' porta in movimento/aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
          End Select
       End If
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorOpenedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
             Case 1
+               ' porta in movimento 
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Yellow")
             Case 2
+               ' porta chiusa
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Green")
          End Select
       End If
@@ -372,6 +373,7 @@ Public Class ControlsMachineButtonUC
       'End If
    End Sub
 
+#End Region    ' State Range
 
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
@@ -569,13 +571,64 @@ Public MustInherit Class MachineButton
                   EgtOutLog("dopo scrittura seconda variabile")
                End If
                Return
+            Case 4
+               ' ------------------------------------ FANUC ------------------------------------
+               ' eventuale scrittura di linea di comando MDI
+               If Not String.IsNullOrEmpty(CmdString) Then
+                  ' attivo mpdalità MDI
+                  m_CN.DGeneralFunctions_WriteCncMode(2)
+                  System.Threading.Thread.Sleep(100)
+                  ' salvo la stringa di comando ricevuta dal file lua
+                  m_CN.sz_ManualDataInput = CmdString
+                  ' esguo la funzione che ha il compito di scrivere il comando MDI
+                  m_CN.MDI_command()
+               End If
+               ' attivo modalità AUTO
+               m_CN.DGeneralFunctions_WriteCncMode(7)
+               System.Threading.Thread.Sleep(100)
+               If String.IsNullOrEmpty(EValue) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue As Boolean
+                     If EValue.Trim = "1" Then bEValue = True
+                     m_CN.NC_write_var_bit(ENumber, CBool(EValue))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber, CShort(EValue))
+                  End If
+                  EgtOutLog("Fanuc_DNumber= " & ENumber & " DValue= " & EValue)
+               End If
+               ' eventale caricamento seconda variabile
+               If String.IsNullOrEmpty(EValue2) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber2)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber2)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber2.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue2 As Boolean
+                     If EValue2.Trim = "1" Then bEValue2 = True
+                     m_CN.NC_write_var_bit(ENumber2, CBool(EValue2))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber2, CShort(EValue2))
+                  End If
+                  EgtOutLog("Fanuc_DNumber2= " & ENumber2 & " DValue2= " & EValue2)
+               End If
+               Return
          End Select
       End If
       '--------------------------------------------------------- MDI ---------------------------------------------------------
       Dim nResult As Short
       ' assegno la modalità di funzionamento
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
-         Case 1, 2
+         Case 1, 2, 4
             nResult = m_CN.DGeneralFunctions_WriteCncMode(2)     ' Modalità MDI per controlli num
          Case 3
             'Per il siemens non devo fare nulla
@@ -599,7 +652,7 @@ Public MustInherit Class MachineButton
          m_CN.DGeneralFunctions_CycleStart()
       End If
       System.Threading.Thread.Sleep(300)
-      ' riprostino la modalità manuale
+      ' ripristino la modalità manuale..?? siucuri ??
       nResult = m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
    End Sub
 
@@ -620,6 +673,7 @@ Public MustInherit Class MachineButton
          EgtTdbGetCurrToolParam(MCH_TP.FEED, dFeed)
       End If
       EgtLuaSetGlobNumVar("CMD.F", dFeed)
+
       Dim dSpeed As Double = 0
       If Not String.IsNullOrWhiteSpace(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text) Then
          StringToDouble(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text, dSpeed)
@@ -628,6 +682,18 @@ Public MustInherit Class MachineButton
          EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)
@@ -789,6 +855,7 @@ Public Class NoStateButton
             ExecuteMDICommand(TLuaScriptName)
          End If
       Else
+         ' FANUC, SIEMENS
          ExecuteMDICommand(TLuaScriptName)
       End If
    End Sub

DirectCuts/CopyTemplateUC.xaml.vb

@@ -5,6 +5,8 @@ Public Class CopyTemplateUC
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   Private m_refControlDirectCutUC As ControlsDirectCutUC1
+
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Array stringhe modalità di acquisizione dei punti
@@ -59,6 +61,7 @@ Public Class CopyTemplateUC
 
    Private Sub CopyTemplate_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_refControlDirectCutUC = m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC1
       m_bActive = True
       SaveBtn.IsEnabled = False
       LineBtn.IsChecked = True
@@ -254,8 +257,7 @@ Public Class CopyTemplateUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
-      m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function EraseCopyTemplatePart() As Boolean

DirectCuts/DirectCutPageUC.xaml

@@ -28,10 +28,10 @@
             <ColumnDefinition Width="7*"/>
          </Grid.ColumnDefinitions>
 
-          <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+         <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
             <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
          </Button>
-            <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+         <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
             <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
          </Button>
 
@@ -42,25 +42,27 @@
 
       </Grid>
 
-         <!-- Definizione della Grid laterale -->
-      <Grid Name="LeftButtonGrid" Grid.Row="1" >
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="7*"/>
-         </Grid.RowDefinitions>
-
-         <!-- Definizione della Grid laterale -->
-         <Grid Name="CutTypeGrid" Grid.Row="1" >
+      <!-- Definizione della Grid laterale -->
+      <!--
+        <Grid Name="LeftButtonGrid" Grid.Row="1" >
             <Grid.RowDefinitions>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="7*"/>
+            </Grid.RowDefinitions>
+
+            -->
+      <!-- Definizione della Grid laterale -->
+      <!--<Grid Name="CutTypeGrid" Grid.Row="1" >
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
                 </Grid.RowDefinitions>
                 <Button Name="ManualBtn" Grid.Column="2" Grid.Row="0"                    
                         Style="{DynamicResource OmagCut_YellowIconButton}">
@@ -140,7 +142,7 @@
                                    Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
                     </Grid>
                 </Button>
-             
+
                 <Button Name="PolishingBtn" Grid.Row="6"
                         Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Grid>
@@ -154,36 +156,51 @@
                     </Grid>
                 </Button>
 
-                <Button Name="CopyTemplateBtn" Grid.Row="7"
-                    Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Grid>
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="80"/>
-                        <ColumnDefinition Width="140"/>
-                    </Grid.ColumnDefinitions>
-                    <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
-                    <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
-                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                </Grid>
-            </Button>
-             
-            <Button Name="SawTestBtn" Grid.Row="8"
-                    Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Grid>
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="80"/>
-                        <ColumnDefinition Width="140"/>
-                    </Grid.ColumnDefinitions>
-                    <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
-                        <TextBlock Name="SawTestTxt" Grid.Column="1"
-                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            </Grid>
-            </Button>
+                -->
+      <!--<Button Name="CopyTemplateBtn" Grid.Row="7"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>-->
+      <!--
+                <Button Name="SquaringBtn" Grid.Row="7"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SquaringTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="SawTestBtn" Grid.Row="8"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SawTestTxt" Grid.Column="1"
+                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+            </Grid>-->
+      <!--
+
+        </Grid>-->
 
-        </Grid>
-      
-      </Grid>
-      
       <!-- Definizione della Grid laterale per bottoni macchina -->
       <Grid Name="MachineButtonGrid" Grid.Row="1">
          <Grid.RowDefinitions>
@@ -201,7 +218,11 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="5*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
             <!--<ColumnDefinition Width="1*"/>-->
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
@@ -215,23 +236,23 @@
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
             <Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
-          
-          <!--Comando asse X-Y-->
-          <ToggleButton Name="XYBtn" Grid.Column="2"
+
+         <!--Comando asse X-Y-->
+         <ToggleButton Name="XYBtn" Grid.Column="2"
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-                <Image Source="{DynamicResource XYJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+            <Image Source="{DynamicResource XYJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
-          
-          <!--Comando asse Z-C-->
-          <ToggleButton Name="ZCBtn" Grid.Column="3"   
+
+         <!--Comando asse Z-C-->
+         <ToggleButton Name="ZCBtn" Grid.Column="3"   
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-              <Image Source="{DynamicResource ZCJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
-          </ToggleButton>
+            <Image Source="{DynamicResource ZCJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
 
          <!--Comando asse Z-B-->
          <ToggleButton Name="ZBBtn" Grid.Column="4"
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-                <Image Source="{DynamicResource ZBJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+            <Image Source="{DynamicResource ZBJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
 
          <!--Comando Remote-->
@@ -240,10 +261,18 @@
             <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
          </ToggleButton>
 
+         <!--Parking-->
+         <ToggleButton Name="ParkingBtn" Grid.Column="6"
+              Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+            <Image Source="{DynamicResource ParkingImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
+          
+          
+
          <!--Comando Manula/MDI-->
-         <Button Name="ManualModeBtn" Grid.Column="7"
+         <Button Name="ManualModeBtn" Grid.Column="11"
                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-             <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+            <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </Button>
 
       </Grid>

DirectCuts/DirectCutPageUC.xaml.vb

@@ -7,18 +7,20 @@ Public Class DirectCutPageUC
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Friend m_MachineButtons As MachineButtonsUC
    Friend m_ManualAxesMove As ManualAxesMoveUC
-   Friend m_SingleCut As SingleCutUC
-   Friend m_SingleDrill As SingleDrillUC
-   ' nuova finestra per i comandi per il taglio manuale nuovo
-   Friend m_SingleCutAuto As SingleCutAuto
-   Friend m_MultipleCut As MultipleCut
-   Friend m_GridCut As GridCut
-   Friend m_FlatteningCut As FlatteningCut
-   Friend m_Polishing As Polishing
-   Friend m_CopyTemplate As CopyTemplateUC
-   Friend m_SawTest As SawTestUC
+
    Friend m_ControlsMachineButton As ControlsMachineButtonUC
    Friend m_VacuumMachineButton As VacuumMachineButtonUC
+   Friend m_ControlsDirectCutUC As ControlsDirectCutUC
+   Friend m_ControlsDirectCutUC1 As ControlsDirectCutUC1
+
+   Friend m_ActiveControl As Controls
+   Enum Controls
+      DirectCutUC
+      DirectCutUC1
+      MachineButtonUC
+      VacuumButtonUC
+   End Enum
+
 
    ' Stato di visualizzazione della macchina
    Friend m_bShowMachine As Boolean = False
@@ -26,8 +28,6 @@ Public Class DirectCutPageUC
    ' Dati generali CN
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
-   ' Riferimento alla pagina correntemente attiva
-   Friend m_ActiveDirectCutPage As DirectCutPages = DirectCutPages.DirectCut
    ' Variabili che indicano attivazione paginette con bottoni macchina
    Private m_ControlsBtn_IsActive As Boolean
 
@@ -41,94 +41,42 @@ Public Class DirectCutPageUC
    ' elenco dei nuovi bottoni
    Private m_ButtonJogList As New List(Of MachineButton)
 
-   Enum DirectCutPages
-      DirectCut
-      ManualAxesMove
-      SingleCut
-      MultipleCut
-      GridCut
-      FlatteningCut
-      Polishing
-      CopyTemplate
-      SawTest
-      SingleCutAuto
-      SingleDrill
-   End Enum
 
    Private Sub DirectCutPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
-      ' leggo la configurazione del programma per i nuovi tagli manuali
-      m_bManulaCut = GetPrivateProfileInt(S_GENERAL, K_MANUAL_CUT, 0, m_MainWindow.GetIniFile()) <> 0
-
       'Creazione delle Page UserControl
       m_MachineButtons = New MachineButtonsUC
       m_ManualAxesMove = New ManualAxesMoveUC
-      m_SingleCut = New SingleCutUC
-      m_SingleDrill = New SingleDrillUC
-      m_MultipleCut = New MultipleCut
-      m_GridCut = New GridCut
-      m_FlatteningCut = New FlatteningCut
-      m_Polishing = New Polishing
-      m_CopyTemplate = New CopyTemplateUC
-      m_SawTest = New SawTestUC
       m_ControlsMachineButton = New ControlsMachineButtonUC
       m_VacuumMachineButton = New VacuumMachineButtonUC
-      ' Costruisco la finestra per il nuovo tipo di taglio manuale
-      m_SingleCutAuto = New SingleCutAuto
+      m_ControlsDirectCutUC = New ControlsDirectCutUC
+      m_ControlsDirectCutUC1 = New ControlsDirectCutUC1
 
       'Posizionemento nella griglia delle Page UserControl
       m_MachineButtons.SetValue(Grid.RowProperty, 2)
-      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 7)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, m_MachineButtons.nCountButton)
       m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
-      If m_bManulaCut Then
-         m_SingleCutAuto.SetValue(Grid.RowProperty, 1)
-      Else
-         m_SingleCut.SetValue(Grid.RowProperty, 1)
-      End If
-      m_SingleDrill.SetValue(Grid.RowProperty, 1)
-      m_MultipleCut.SetValue(Grid.RowProperty, 1)
-      m_GridCut.SetValue(Grid.RowProperty, 1)
-      m_FlatteningCut.SetValue(Grid.RowProperty, 1)
-      m_Polishing.SetValue(Grid.RowProperty, 1)
-      m_CopyTemplate.SetValue(Grid.RowProperty, 1)
-      m_SawTest.SetValue(Grid.RowProperty, 1)
+
+      m_ControlsDirectCutUC.SetValue(Grid.RowProperty, 1)
+      m_ControlsDirectCutUC1.SetValue(Grid.RowProperty, 1)
       m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
       m_VacuumMachineButton.SetValue(Grid.RowProperty, 1)
 
       ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [ControlMachButtons])
       Dim bCollapsedNewBottonsConsole As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons("JogButtons", "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
+      ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [VacuumMachButtons])
+      Dim bCollapsedVacuumButton As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_VACUUMMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       If Not m_NewMachineButtonsType Then
          'Assegno MachineButtons alla pagina
          LowerButtonGrid.Children.Add(m_MachineButtons)
          ControlsMachineBtn.Visibility = Windows.Visibility.Collapsed
          VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
       End If
-
-      If GetPrivateProfileInt(S_NUMERICALCONTROL, K_TYPE, 0, m_MainWindow.GetMachIniFile()) = 0 Then
-         ManualBtn.IsEnabled = False
-         ManualModeBtn.Visibility = Windows.Visibility.Hidden
+      ' se non sono configurate le ventose allora nascondo il comando
+      If m_NewMachineButtonsType AndAlso bCollapsedVacuumButton Then
+         VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
       End If
 
-      ' ManualBtn.Content = EgtMsg(90201)
-      ManualTxt.Text = EgtMsg(90201)
-      'SingleCutBtn.Content = EgtMsg(90202)
-      SingleCutTxt.Text = EgtMsg(90202)
-      'SingleDrillBtn.Content = "Foro singolo"
-      SingleDrillTxt.Text = EgtMsg(90258)
-      'MultipleCutBtn.Content = EgtMsg(90203)
-      MultipleCutTxt.Text = EgtMsg(90203)
-      'GridCutBtn.Content = EgtMsg(90204)
-      GridCutTxt.Text = EgtMsg(90204)
-      'FlatteningCutBtn.Content = EgtMsg(90206)
-      FlatteningCutTxt.Text = EgtMsg(90206)
-      'PolishingBtn.Content = EgtMsg(90231)
-      PolishingTxt.Text = EgtMsg(90231)
-      'CopyTemplateBtn.Content = EgtMsg(90209)
-      CopyTemplateTxt.Text = EgtMsg(90209)
-      'SawTestBtn.Content = EgtMsg(90207)
-      SawTestTxt.text = EgtMsg(90207)
-
-
       ' nuovi bottoni 20/05/2021 - modifica specifiche 04/08/2021
       ' leggo il numero di assi attivi nella macchina
       Dim AxesNumber = GetPrivateProfileInt(S_AXES, K_AXESNUM, 5, m_MainWindow.GetMachIniFile())
@@ -176,59 +124,10 @@ Public Class DirectCutPageUC
       ' lo stato di questi comandi vieni carico dalla lettura del PLC (refresh)
       '----------- FINE NUOVI BOTTONI------------
 
-      ' Se rientro da simulazione
-      If m_ActiveDirectCutPage = DirectCutPages.SingleCut Then
-         LeftButtonGrid.Children.Add(m_SingleCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto Then
-         LeftButtonGrid.Children.Add(m_SingleCutAuto)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.MultipleCut Then
-         LeftButtonGrid.Children.Add(m_MultipleCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.GridCut Then
-         LeftButtonGrid.Children.Add(m_GridCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.FlatteningCut Then
-         LeftButtonGrid.Children.Add(m_FlatteningCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.Polishing Then
-         LeftButtonGrid.Children.Add(m_Polishing)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.SawTest Then
-         LeftButtonGrid.Children.Add(m_SawTest)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleDrill Then
-         LeftButtonGrid.Children.Add(m_SingleDrill)
-         Return
-      End If
-
-      ' Caso standard
-      m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      LoadLastDirectCutControls()
 
       ' Se macchina fotografica abilitata
       PhotoBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO)
-
-      ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
-      Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
-      Dim bH1Exists As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
-
-      ManualBtn.IsEnabled = bH1Exists
-      ' sviluppo rimasto in sospeso
-      If m_bManulaCut Then
-         ' anche se non è presente un grezzo mantengo abilitato il bottone
-         SingleCutBtn.IsEnabled = True
-      Else
-         SingleCutBtn.IsEnabled = bRawOk
-      End If
-      MultipleCutBtn.IsEnabled = bRawOk
-      GridCutBtn.IsEnabled = bRawOk
-      SingleDrillBtn.IsEnabled = (bRawOk And bH1Exists)
-      FlatteningCutBtn.IsEnabled = (bRawOk And bH1Exists)
-      PolishingBtn.IsEnabled = (bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
-      SawTestBtn.IsEnabled = (bRawOk And bH1Exists)
-      CopyTemplateBtn.IsEnabled = bH1Exists
-
       ' aggiorno la visualizzazione dei parametri
       ReloadParam()
 
@@ -247,9 +146,9 @@ Public Class DirectCutPageUC
       If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
          bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
       End If
-      m_SingleCut.SetEnableParam(bSaw)
-      m_MultipleCut.SetEnableParam(bSaw)
-      m_GridCut.SetEnableParam(bSaw)
+      m_ControlsDirectCutUC.m_SingleCut.SetEnableParam(bSaw)
+      m_ControlsDirectCutUC.m_MultipleCut.SetEnableParam(bSaw)
+      m_ControlsDirectCutUC.m_GridCut.SetEnableParam(bSaw)
    End Sub
 
    Private Sub SetVisibilityJogButtuns()
@@ -257,6 +156,7 @@ Public Class DirectCutPageUC
       ZCBtn.Visibility = Visibility.Collapsed
       ZBBtn.Visibility = Visibility.Collapsed
       RemoteBtn.Visibility = Visibility.Collapsed
+      ParkingBtn.Visibility = Visibility.Collapsed
 
       Dim Item As MachineButton = Nothing
       For Each Item In m_ButtonJogList
@@ -277,6 +177,10 @@ Public Class DirectCutPageUC
                RemoteBtn.Visibility = Visibility.Visible
                RemoteBtn.Foreground = Brushes.White
                RemoteBtn.Content = "Remote"
+            Case K_PARKING
+               ParkingBtn.Visibility = Visibility.Visible
+               ParkingBtn.Foreground = Brushes.White
+               ParkingBtn.ToolTip = "Parking"
          End Select
       Next
    End Sub
@@ -305,63 +209,13 @@ Public Class DirectCutPageUC
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
    End Sub
 
-   Private Sub ManualBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualBtn.Click
-      LeftButtonGrid.Children.Add(m_ManualAxesMove)
-      m_ActiveDirectCutPage = DirectCutPages.ManualAxesMove
-   End Sub
-
-   Private Sub SingleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleCutBtn.Click
-      If m_bManulaCut Then
-         LeftButtonGrid.Children.Add(m_SingleCutAuto)
-         m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto
-      Else
-         LeftButtonGrid.Children.Add(m_SingleCut)
-         m_ActiveDirectCutPage = DirectCutPages.SingleCut
-      End If
-
-   End Sub
-
-   Private Sub MultipleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles MultipleCutBtn.Click
-      LeftButtonGrid.Children.Add(m_MultipleCut)
-      m_ActiveDirectCutPage = DirectCutPages.MultipleCut
-   End Sub
-
-   Private Sub GridCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles GridCutBtn.Click
-      LeftButtonGrid.Children.Add(m_GridCut)
-      m_ActiveDirectCutPage = DirectCutPages.GridCut
-   End Sub
-
-   Private Sub FlatteningCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles FlatteningCutBtn.Click
-      LeftButtonGrid.Children.Add(m_FlatteningCut)
-      m_ActiveDirectCutPage = DirectCutPages.FlatteningCut
-   End Sub
-
-   Private Sub PolishingBtn_Click(sender As Object, e As RoutedEventArgs) Handles PolishingBtn.Click
-      LeftButtonGrid.Children.Add(m_Polishing)
-      m_ActiveDirectCutPage = DirectCutPages.Polishing
-   End Sub
-
-   Private Sub CopyTemplateBtn_Click(sender As Object, e As RoutedEventArgs) Handles CopyTemplateBtn.Click
-      LeftButtonGrid.Children.Add(m_CopyTemplate)
-      m_ActiveDirectCutPage = DirectCutPages.CopyTemplate
-   End Sub
-
-   Private Sub SawTestBtn_Click(sender As Object, e As RoutedEventArgs) Handles SawTestBtn.Click
-      LeftButtonGrid.Children.Add(m_SawTest)
-      m_ActiveDirectCutPage = DirectCutPages.SawTest
-   End Sub
-
-   Private Sub SingleDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleDrillBtn.Click
-      LeftButtonGrid.Children.Add(m_SingleDrill)
-      m_ActiveDirectCutPage = DirectCutPages.SingleDrill
-   End Sub
-
    Private Sub ControlsMachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles ControlsMachineBtn.Click
       If ControlsMachineBtn.IsChecked Then
          m_ControlsMachineButton = New ControlsMachineButtonUC
          m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
          m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
          MachineButtonGrid.Children.Add(m_ControlsMachineButton)
+         m_ActiveControl = Controls.MachineButtonUC
          If VacuumMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
             VacuumMachineBtn.IsChecked = False
@@ -374,6 +228,7 @@ Public Class DirectCutPageUC
    Private Sub VacuumMachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles VacuumMachineBtn.Click
       If VacuumMachineBtn.IsChecked Then
          MachineButtonGrid.Children.Add(m_VacuumMachineButton)
+         m_ActiveControl = Controls.VacuumButtonUC
          If ControlsMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
             ControlsMachineBtn.IsChecked = False
@@ -383,7 +238,21 @@ Public Class DirectCutPageUC
       End If
    End Sub
 
-   '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
+   Friend Sub LoadDirectCutUC()
+      ManageControls()
+      m_ActiveControl = Controls.DirectCutUC
+      MachineButtonGrid.Children.Add(m_ControlsDirectCutUC)
+   End Sub
+
+   Friend Sub LoadDirectCutUC1()
+      ManageControls()
+      m_ActiveControl = Controls.DirectCutUC1
+      MachineButtonGrid.Children.Add(m_ControlsDirectCutUC1)
+   End Sub
+
+
+#Region "[JogButtons]"
+
    Private Sub XYBtn_Click(sender As Object, e As RoutedEventArgs) Handles XYBtn.Click
       ' riverco in elenco il bottone XYJog
       Dim XYJogButton As MachineButton = Nothing
@@ -513,17 +382,57 @@ Public Class DirectCutPageUC
       End If
    End Sub
 
-   '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
+   Private Sub ParkingBtn_Click(sender As Object, e As RoutedEventArgs) Handles ParkingBtn.Click
+      Dim ParkingButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_PARKING Then
+            ParkingButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(ParkingButton) Then Return
+      ' eseguo lo script lua associato
+      Dim CurrentBtn As Primitives.ToggleButton = e.Source
+      Dim sLuaFileName As String = String.Empty
+      ' verifico lo stato del bottone per avviare il giusto script
+      If CurrentBtn.IsChecked() Then
+         sLuaFileName = ParkingButton.TLuaScriptName
+      Else
+         sLuaFileName = ParkingButton.FLuaScriptName
+      End If
+      ParkingButton.ExecuteMDICommand(sLuaFileName)
+   End Sub
+
+   Friend Sub ParkingStateChanged(bParkingState As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim ParkingButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonJogList
+         If MachineButton.StateFlag.Trim = K_PARKING Then
+            ParkingButton = MachineButton
+            Exit For
+         End If
+      Next
+      If Not IsNothing(ParkingButton) Then
+         ParkingButton.SetIsChecked(bParkingState)
+         ParkingButton.IsChecked = bParkingState
+      End If
+   End Sub
+
+#End Region    '[JogButtons]
+
    Private Sub MachViewModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachViewModeBtn.Click
       If m_bShowMachine Then
          ' aggiorno lo stato
          Select Case m_nMachLook
-         Case MCH_LOOK.ALL
-            m_nMachLook = MCH_LOOK.TAB_HEAD
-         Case MCH_LOOK.TAB_HEAD
-            m_nMachLook = MCH_LOOK.TAB_TOOL
-         Case Else
-            m_nMachLook = MCH_LOOK.ALL
+            Case MCH_LOOK.ALL
+               m_nMachLook = MCH_LOOK.TAB_HEAD
+            Case MCH_LOOK.TAB_HEAD
+               m_nMachLook = MCH_LOOK.TAB_TOOL
+            Case MCH_LOOK.TAB_TOOL
+               m_nMachLook = MCH_LOOK.TAB
+            Case Else
+               m_nMachLook = MCH_LOOK.ALL
          End Select
          ' aggiorno lo stato della macchina e la sua visualizzazione
          EgtSetMachineLook(m_nMachLook)
@@ -532,36 +441,40 @@ Public Class DirectCutPageUC
    End Sub
 
    Friend Sub DirectCutPage_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
-      Select Case m_ActiveDirectCutPage
-         Case DirectCutPages.DirectCut Or DirectCutPages.ManualAxesMove
-            ' Non è necessario fare alcunché
-         Case DirectCutPages.SingleCut
-            LeftButtonGrid.Children.Remove(m_SingleCut)
-         Case DirectCutPages.SingleCutAuto
-            LeftButtonGrid.Children.Remove(m_SingleCutAuto)
-         Case DirectCutPages.MultipleCut
-            LeftButtonGrid.Children.Remove(m_MultipleCut)
-         Case DirectCutPages.GridCut
-            LeftButtonGrid.Children.Remove(m_GridCut)
-         Case DirectCutPages.FlatteningCut
-            LeftButtonGrid.Children.Remove(m_FlatteningCut)
-         Case DirectCutPages.Polishing
-            LeftButtonGrid.Children.Remove(m_Polishing)
-         Case DirectCutPages.CopyTemplate
-            LeftButtonGrid.Children.Remove(m_CopyTemplate)
-         Case DirectCutPages.SawTest
-            LeftButtonGrid.Children.Remove(m_SawTest)
-         Case DirectCutPages.SingleDrill
-            LeftButtonGrid.Children.Remove(m_SingleDrill)
+      ManageControls()
+   End Sub
+
+   Friend Sub ManageControls()
+      Select Case m_ActiveControl
+         Case Controls.DirectCutUC
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            m_ControlsDirectCutUC.DirectCutPage_Unloaded(Nothing, Nothing)
+         Case Controls.DirectCutUC1
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC1)
+            m_ControlsDirectCutUC1.DirectCutPage_Unloaded(Nothing, Nothing)
+         Case Controls.MachineButtonUC
+            MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC1)
+            ControlsMachineBtn.IsChecked = False
+         Case Controls.VacuumButtonUC
+            MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
+            VacuumMachineBtn.IsChecked = False
+      End Select
+   End Sub
+
+   Friend Sub LoadLastDirectCutControls()
+      Select Case m_ActiveControl
+         Case Controls.DirectCutUC
+            MachineButtonGrid.Children.Add(m_ControlsDirectCutUC)
+         Case Controls.DirectCutUC1
+            MachineButtonGrid.Children.Add(m_ControlsDirectCutUC1)
+         Case Else
+            m_ActiveControl = Controls.DirectCutUC
+            MachineButtonGrid.Children.Add(m_ControlsDirectCutUC)
       End Select
-      If ControlsMachineBtn.IsChecked Then
-         MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
-         ControlsMachineBtn.IsChecked = False
-      End If
-      If VacuumMachineBtn.IsChecked Then
-         MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
-         VacuumMachineBtn.IsChecked = False
-      End If
    End Sub
 
    Private Sub ManualModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualModeBtn.Click

DirectCuts/FlatteningCut.xaml

@@ -65,7 +65,7 @@
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"

DirectCuts/FlatteningCut.xaml.vb

@@ -66,6 +66,7 @@ Public Class FlatteningCut
       Right
    End Enum
 
+   ' Per abilitare la spianatura con la FRESA deve essere imposatato a TRUE il flag "Usa Fresa" nella pagina MACCHINA (campo INCISIONI)
    Private Sub FlatteningCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
       m_PointsModeArray(PT_MODE.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
@@ -185,11 +186,14 @@ Public Class FlatteningCut
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If( m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString( m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      ' imposto la Z di sicurezza corretta
+      EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
+      EgtMdbSave()
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -567,6 +571,7 @@ Public Class FlatteningCut
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -609,18 +614,21 @@ Public Class FlatteningCut
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
       EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
       EgtMdbSave()
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    ' ricavo l'ingombro di lavorazione in funzione dell'utensile selezionato
    Private Function GetFootPrintTool() As Double
+      ' vedere nella pagina Allarm il capito "Incisioni"
+      Dim bForceUseMill As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0)
       Dim dFootPrint As Double = 0
       ' verifico quale lavorazione è attiva
-      If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) Then
+      If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) AndAlso Not bForceUseMill Then
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dFootPrint)
       ElseIf Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrMilling) Then
          Dim sCurrMill = m_MainWindow.m_CurrentMachine.sCurrMill
-         GetDrillFromDrilling(sCurrMill, m_MainWindow.m_CurrentMachine.sCurrMilling)
+         'GetDrillFromDrilling(sCurrMill, m_MainWindow.m_CurrentMachine.sCurrMilling)
+         GetMillFromMilling(sCurrMill, m_MainWindow.m_CurrentMachine.sCurrMilling)
          ' recupero informazioni della fresa in uso
          EgtTdbSetCurrTool(sCurrMill)
          EgtTdbGetCurrToolParam(MCH_TP.DIAM, dFootPrint)
@@ -652,6 +660,9 @@ Public Class FlatteningCut
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
+      If (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0) Then
+         EgtSetInfo(nCutId, INFO_WIDTH, GetFootPrintTool)
+      End If
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, 0)
       ' Imposto prima direzione
       EgtSetInfo(nCutId, INFO_DIR, 1)

DirectCuts/GridCut.xaml

@@ -61,12 +61,12 @@
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <Grid Grid.Row="5" Grid.ColumnSpan="2">
@@ -89,7 +89,7 @@
             <TextBlock Name="DimPzXTxBl" Grid.Column="2" Grid.Row="0"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
 
-            <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75"
+            <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             <EgtWPFLib:EgtTextBox Name="DimPzXTxBx" Grid.Column="2" Grid.Row="1" Width="75"
             Style="{StaticResource OmagCut_CalculatorTextBox}" />
@@ -99,7 +99,7 @@
             <TextBlock Name="DimPzYTxBl" Grid.Column="2" Grid.Row="2"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
 
-            <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75"
+            <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             <EgtWPFLib:EgtTextBox Name="DimPzYTxBx" Grid.Column="2" Grid.Row="3" Width="75"
             Style="{StaticResource OmagCut_CalculatorTextBox}" />

DirectCuts/GridCut.xaml.vb

@@ -168,7 +168,7 @@ Public Class GridCut
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -494,6 +494,7 @@ Public Class GridCut
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -534,7 +535,7 @@ Public Class GridCut
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateGridCut() As Boolean

DirectCuts/MachineButtonsUC.xaml.vb

@@ -7,6 +7,8 @@ Public Class MachineButtonsUC
    Private m_DirectCutPage As DirectCutPageUC
    Friend m_CN As CN_generico
 
+   Public nCountButton As Integer = 11
+
    Private m_bOnlyLaser As Boolean = False
    Private m_bFirst As Boolean = True
 
@@ -33,6 +35,7 @@ Public Class MachineButtonsUC
    Private Const BTN_STATE_DOOR_OPENED As String = "DoorOpened"
    Private Const BTN_STATE_DOOR_CLOSED As String = "DoorClosed"
    Private Const BTN_STATE_PARKING As String = "Parking"
+   Private Const BTN_STATE_HOME As String = "Home"
    Private Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
    Private Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
    Private Const BTN_ENABLE_PC As String = "EnablePC"
@@ -76,6 +79,9 @@ Public Class MachineButtonsUC
          GetToggleButton(nIndex + 1).Visibility = Windows.Visibility.Hidden
       Next
 
+      ' notifico nella variabile pubblica il numero di pulsanti inseriti nella barra
+      nCountButton = m_nCount
+
       ' Se variabile di stato "Nothing"/"DoorOpened"/"DoorClosed" imposto immagine fissa
       For nIndex As Integer = 0 To m_nCount - 1
          If StateFlagArray(nIndex) = BTN_STATE_NOTHING OrElse
@@ -267,9 +273,62 @@ Public Class MachineButtonsUC
                   End If
                   Return
                End If
+               ' CONTROLLO FANUC
+            Case 4
+               ' ------------------------------------ FANUC ------------------------------------
+               ' eventuale scrittura di linea di comando MDI
+               If Not String.IsNullOrEmpty(CmdString) Then
+                  ' attivo mpdalità MDI
+                  m_CN.DGeneralFunctions_WriteCncMode(2)
+                  System.Threading.Thread.Sleep(100)
+                  ' salvo la stringa di comando ricevuta dal file lua
+                  m_CN.sz_ManualDataInput = CmdString
+                  ' esguo la funzione che ha il compito di scrivere il comando MDI
+                  m_CN.MDI_command()
+               End If
+               ' attivo modalità AUTO
+               m_CN.DGeneralFunctions_WriteCncMode(7)
+               System.Threading.Thread.Sleep(100)
+               If String.IsNullOrEmpty(EValue) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue As Boolean
+                     If EValue.Trim = "1" Then bEValue = True
+                     m_CN.NC_write_var_bit(ENumber, CBool(EValue))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber, CShort(EValue))
+                  End If
+                  EgtOutLog("Fanuc_DNumber= " & ENumber & " DValue= " & EValue)
+               End If
+               ' eventale caricamento seconda variabile
+               If String.IsNullOrEmpty(EValue2) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber2)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber2)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber2.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue2 As Boolean
+                     If EValue2.Trim = "1" Then bEValue2 = True
+                     m_CN.NC_write_var_bit(ENumber2, CBool(EValue2))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber2, CShort(EValue2))
+                  End If
+                  EgtOutLog("Fanuc_DNumber2= " & ENumber2 & " DValue2= " & EValue2)
+               End If
+               Return
          End Select
       End If
 
+
       Dim nResult As Short
       ' Imposto modalità MDI per controlli num
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
@@ -286,6 +345,8 @@ Public Class MachineButtonsUC
             m_CN.DGeneralFunctions_CycleStart()
          Case 3
             'Per il siemens non devo fare nulla
+         Case 4
+            ' Nicola: 27/03/2023 attivazione della funzione M# indicata?
       End Select
 
       If b2Start Then
@@ -320,6 +381,17 @@ Public Class MachineButtonsUC
          EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)
@@ -640,6 +712,40 @@ Public Class MachineButtonsUC
       End If
    End Sub
 
+   Friend Sub HomeStateChanged(HomeState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_HOME)
+      If nIndex = -1 Then Return
+      If HomeState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
    Friend Sub EnableZoneStateChanged(ZoneState As Integer)
       Dim sFlag As String = String.Empty
       If ZoneState = 1 Then

DirectCuts/ManualAxesMoveUC.xaml

@@ -69,10 +69,10 @@
          <EgtWPFLib:EgtTextBox x:Name="L3TxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
          <Button x:Name="R1Btn" Grid.Row="4" Height="60" Width="60" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-         <EgtWPFLib:EgtTextBox x:Name="R1TxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox x:Name="R1TxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
          <Button x:Name="R2Btn" Grid.Row="5" Height="60" Width="60" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-         <EgtWPFLib:EgtTextBox x:Name="R2TxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox x:Name="R2TxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
    
          <Grid Grid.Row="7" Grid.ColumnSpan="2">

DirectCuts/ManualAxesMoveUC.xaml.vb

@@ -21,10 +21,12 @@ Public Class ManualAxesMoveUC
       ' Messaggi
       L1SawThChBx.Content = EgtMsg(90232)   ' Spessore lama
       L2SawThChBx.Content = EgtMsg(90232)   ' Spessore lama
+
       AddHandler m_Timer.Tick, AddressOf Timer_tick
    End Sub
 
    Private Sub ManualAxesMove_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      m_CN = m_MainWindow.m_DirectCutPageUC.m_CN
       ' Valori feed e speed da lama corrente
       Dim dTemp As Double = 0
       EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
@@ -207,7 +209,7 @@ Public Class ManualAxesMoveUC
       System.Threading.Thread.Sleep(150)
       m_CN.DGeneralFunctions_CycleStart()
       System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
-      m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
+      ' m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
       m_MoveClicked = False
    End Sub
 
@@ -338,7 +340,7 @@ Public Class ManualAxesMoveUC
    End Function
 
    Private Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Sub G0Btn_Checked(sender As Object, e As RoutedEventArgs) Handles G0Btn.Checked

DirectCuts/MultipleCut.xaml

@@ -68,12 +68,12 @@
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="5"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <Grid Grid.Row="6" Grid.ColumnSpan="2" Visibility="Visible">
@@ -124,70 +124,70 @@
 
                      <TextBlock Name="Num1TxBl" Grid.Column="0" Grid.Row="0"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz1TxBx" Grid.Column="1" Grid.Row="0" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz1TxBx" Grid.Column="1" Grid.Row="0" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz1TxBx" Grid.Column="3" Grid.Row="0" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num2TxBl" Grid.Column="0" Grid.Row="1"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz2TxBx" Grid.Column="1" Grid.Row="1" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz2TxBx" Grid.Column="1" Grid.Row="1" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz2TxBx" Grid.Column="3" Grid.Row="1" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num3TxBl" Grid.Column="0" Grid.Row="2"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz3TxBx" Grid.Column="1" Grid.Row="2" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz3TxBx" Grid.Column="1" Grid.Row="2" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz3TxBx" Grid.Column="3" Grid.Row="2" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num4TxBl" Grid.Column="0" Grid.Row="3"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz4TxBx" Grid.Column="1" Grid.Row="3" Width="75"
+                     <EgtWPFLib:EgtTextBox Name="NumPz4TxBx" Grid.Column="1" Grid.Row="3" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz4TxBx" Grid.Column="3" Grid.Row="3" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num5TxBl" Grid.Column="0" Grid.Row="4"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz5TxBx" Grid.Column="1" Grid.Row="4" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz5TxBx" Grid.Column="1" Grid.Row="4" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz5TxBx" Grid.Column="3" Grid.Row="4" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num6TxBl" Grid.Column="0" Grid.Row="5"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz6TxBx" Grid.Column="1" Grid.Row="5" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz6TxBx" Grid.Column="1" Grid.Row="5" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz6TxBx" Grid.Column="3" Grid.Row="5" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num7TxBl" Grid.Column="0" Grid.Row="6"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz7TxBx" Grid.Column="1" Grid.Row="6" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz7TxBx" Grid.Column="1" Grid.Row="6" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz7TxBx" Grid.Column="3" Grid.Row="6" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num8TxBl" Grid.Column="0" Grid.Row="7"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz8TxBx" Grid.Column="1" Grid.Row="7" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz8TxBx" Grid.Column="1" Grid.Row="7" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz8TxBx" Grid.Column="3" Grid.Row="7" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num9TxBl" Grid.Column="0" Grid.Row="8"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz9TxBx" Grid.Column="1" Grid.Row="8" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz9TxBx" Grid.Column="1" Grid.Row="8" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz9TxBx" Grid.Column="3" Grid.Row="8" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num10TxBl" Grid.Column="0" Grid.Row="9"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz10TxBx" Grid.Column="1" Grid.Row="9" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz10TxBx" Grid.Column="1" Grid.Row="9" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz10TxBx" Grid.Column="3" Grid.Row="9" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>

DirectCuts/MultipleCut.xaml.vb

@@ -195,7 +195,7 @@ Public Class MultipleCut
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -540,6 +540,7 @@ Public Class MultipleCut
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -580,7 +581,7 @@ Public Class MultipleCut
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateMultipleCut() As Boolean

DirectCuts/Polishing.xaml.vb

@@ -6,6 +6,8 @@ Public Class Polishing
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   Private m_refControlDirectCutUC As ControlsDirectCutUC1
+
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Flag di simulazione in corso
@@ -30,6 +32,7 @@ Public Class Polishing
    Private Sub Polishing_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Attivo la pagina
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_refControlDirectCutUC = m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC1
       m_bActive = True
       ' Se rientro da simulazione
       If m_bSimul Then
@@ -60,7 +63,7 @@ Public Class Polishing
       If PolishingCmBx.SelectedIndex < 0 Then
          m_bPoliOk = False
          UpdateSimulOkBtn()
-      End If 
+      End If
       ' Rendo semitrasparente il grezzo
       Dim nRawSolidId = EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_RAW_SOLID)
       EgtSetAlpha( nRawSolidId, 60)
@@ -72,7 +75,7 @@ Public Class Polishing
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_refControlDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC1.DirectCutPages.DirectCut
          ' Cancello eventuali lucidature
          RemovePolishings()
          ' Riattivo eventuali lavorazioni presenti
@@ -148,6 +151,7 @@ Public Class Polishing
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -188,7 +192,7 @@ Public Class Polishing
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreatePolishing( sKitName As String) As Boolean

DirectCuts/SawTestUC.xaml

@@ -70,7 +70,7 @@
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="OffsetTxBl" Grid.Column="0" Grid.Row="5"

DirectCuts/SawTestUC.xaml.vb

@@ -5,6 +5,7 @@ Public Class SawTestUC
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   Private m_refControlDirectCutUC As ControlsDirectCutUC1
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Flag di simulazione in corso
@@ -76,6 +77,7 @@ Public Class SawTestUC
    Private Sub SawTest_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Attivo la pagina
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_refControlDirectCutUC = m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC1
       m_bActive = True
       ' Se rientro da simulazione
       If m_bSimul Then
@@ -139,7 +141,7 @@ Public Class SawTestUC
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_TEST_OFFSET, DoubleToString( m_dOffset, 2), m_MainWindow.GetIniFile())
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_refControlDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC1.DirectCutPages.DirectCut1
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -419,6 +421,7 @@ Public Class SawTestUC
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -459,7 +462,7 @@ Public Class SawTestUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleCut() As Boolean

DirectCuts/SingleCutAuto.xaml.vb

@@ -363,7 +363,7 @@ Public Class SingleCutAuto
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -715,6 +715,7 @@ Public Class SingleCutAuto
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -758,7 +759,7 @@ Public Class SingleCutAuto
       ' reimposto il precedetne utensile e lavorazione
       m_MainWindow.m_CurrentMachine.sCurrSaw = m_PrecSaw
       m_MainWindow.m_CurrentMachine.sCurrSawing = m_PrecSawing
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleCut() As Boolean

DirectCuts/SingleCutUC.xaml

@@ -69,12 +69,12 @@
    
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
    
          <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="5"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="OffsetTxBl" Grid.Column="0" Grid.Row="6"

DirectCuts/SingleCutUC.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Threading
+Imports EgtUILib
 
 Public Class SingleCutUC
 
@@ -43,6 +44,10 @@ Public Class SingleCutUC
    Private Const MIN_CUT_LEN As Double = 10.0
    Private Const MAX_SIDE_ANG As Double = 60.0
    ' Costanti che indicano la modalità di acquisizione dei punti
+
+   ' Utilizzato per aggiornare la posizione della macchina
+   Private m_RefreshTimer As New DispatcherTimer
+
    Private Enum PT_MODE As Integer
       SAW = 0
       LASER = 1
@@ -68,14 +73,14 @@ Public Class SingleCutUC
       SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
       OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dAngV = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dLen = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_ANGV, m_dAngV, m_MainWindow.GetIniFile())
       m_dOffset = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_OFFSET, m_dOffset, m_MainWindow.GetIniFile())
       m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
-      m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
    End Sub
 
    Private Sub SingleCut_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -92,6 +97,10 @@ Public Class SingleCutUC
          m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
          EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
          EgtDraw()
+         ' riavvio il timer per visualizzare la poszione della macchina
+         If Not IsNothing(m_RefreshTimer) Then
+            m_RefreshTimer.Start()
+         End If
          Return
       End If
       ' Disabilito registrazione progetto modificato
@@ -114,7 +123,7 @@ Public Class SingleCutUC
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -138,26 +147,45 @@ Public Class SingleCutUC
       ' Deseleziono bottone primo punto
       Point1Btn.IsChecked = False
 
-      ' la visualizzazione dei comandi è gestira dalla DirectCutPageUC richiamando la funzione ReloadParam
+      ' la visualizzazione dei comandi è gestita dalla DirectCutPageUC richiamando la funzione ReloadParam
+
+      ' forzo la macchina ad essere visibile fin da subito
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
+      m_MainWindow.m_DirectCutPageUC.m_nMachLook = MCH_LOOK.TAB
+      ' Creo il timer il timer per aggiornare il posizionamento della macchina
+      AddHandler m_RefreshTimer.Tick, AddressOf RefreshTimer_tick
+      m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(1000)
 
       ' Aggiorno visualizzazione
       EgtDraw()
+
+      ' Avvi il timer
+      m_RefreshTimer.Start()
+   End Sub
+
+   Private Sub RefreshTimer_tick()
+      ' se è impostata la visualizzazione della sola tavola allora non aggiorno il disegno
+      If m_MainWindow.m_DirectCutPageUC.m_nMachLook = MCH_LOOK.TAB Then Return
+      ' Aggiorno visualizzazione
+      SetMachineInCurrPos()
+      ' Aggiorno il disegno
+      EgtDraw()
    End Sub
 
    Friend Sub SingleCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_LENGTH, DoubleToString( m_dLen, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_ANGV, DoubleToString( m_dAngV, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_LENGTH, DoubleToString(m_dLen, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_ANGV, DoubleToString(m_dAngV, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_OFFSET, DoubleToString(m_dOffset, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_SAWTH, If(m_bSawTh, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -171,6 +199,8 @@ Public Class SingleCutUC
          EgtSetMachineLook(MCH_LOOK.TAB)
          EgtDraw()
       End If
+      ' interrompo il Timer per aggiornare la visualizzazione del posizionamento macchina 
+      m_RefreshTimer.Stop()
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
@@ -279,7 +309,7 @@ Public Class SingleCutUC
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP1
          m_ptTipP1 = m_ptPrev
@@ -298,6 +328,7 @@ Public Class SingleCutUC
       m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
       EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
       EgtDraw()
+
       ' Seleziono il bottone per indicare che il primo punto è stato acquisito
       Point1Btn.IsChecked = True
       ' Abilito e deseleziono secondo punto
@@ -358,7 +389,7 @@ Public Class SingleCutUC
          m_dAngV = 90 - dTAngV
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
@@ -476,7 +507,7 @@ Public Class SingleCutUC
       EgtDraw()
    End Sub
 
-   Private Sub SawThick_Click( sender As Object, e As RoutedEventArgs) Handles SawThChBx.Click
+   Private Sub SawThick_Click(sender As Object, e As RoutedEventArgs) Handles SawThChBx.Click
       ' Recupero lo stato di check
       m_bSawTh = SawThChBx.IsChecked()
       ' Disegno il taglio
@@ -524,6 +555,7 @@ Public Class SingleCutUC
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -535,9 +567,9 @@ Public Class SingleCutUC
       m_CurrProjPage.SetWarningMessage( "Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -564,7 +596,7 @@ Public Class SingleCutUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleCut() As Boolean
@@ -582,7 +614,7 @@ Public Class SingleCutUC
       Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       EgtTdbSetCurrTool(sSaw)
       Dim dThick As Double = 0
-      ' se è impostata una lavorazione di lama
+      ' Se è impostata una lavorazione di lama
       If Not String.IsNullOrEmpty(sSawing) Then
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       End If
@@ -598,14 +630,19 @@ Public Class SingleCutUC
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
-      If Math.Abs(m_dOffset) > 10 * EPS_SMALL Then
-         Dim dTotOffset = m_dOffset
-         If m_bSawTh Then dTotOffset += If( m_dOffset > 0, dThick, -dThick)
+      ' Applico la correzione di spessore lama -> anche se Offset=0! ver_2.5b1
+      Dim dTotOffset = m_dOffset
+      If m_bSawTh Then
+         dTotOffset += If(m_dOffset > 0, dThick, -dThick)
+         EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
+      Else
          EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
       End If
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, m_dAngV)
+      ' Imposto se disabilitare l'inversine di direzione del taglio
+      If Not m_MainWindow.m_CurrentMachine.bEnableInvert Then EgtSetInfo(nCutId, INFO_ENABLE_INVERT, 0)
       ' Creo layer per crocetta di riferimento
       Dim nCrossLayerId = EgtCreateGroup(nPartId)
       ' Aggiungo crocetta/e

DirectCuts/SingleDrillUC.xaml.vb

@@ -136,7 +136,7 @@ Public Class SingleDrillUC
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -342,6 +342,7 @@ Public Class SingleDrillUC
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -382,7 +383,7 @@ Public Class SingleDrillUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleDrill() As Boolean

DirectCuts/SquaringUC.xaml

@@ -0,0 +1,162 @@
+<UserControl x:Class="SquaringUC"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   mc:Ignorable="d" 
+   d:DesignHeight="597.3" d:DesignWidth="256">
+
+   <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{StaticResource OmagCut_LightGray}">-->
+   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
+
+      <!-- Definizione della Grid MultipleCut -->
+      <Grid Name="SingleCutGrid" >
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="2*"/>
+            <ColumnDefinition Width="1*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="2*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1*"/>
+         </Grid.RowDefinitions>
+
+         <!--<Grid Grid.Row="0" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+            </Grid>-->
+
+         <!--<ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
+            Margin="6,0,6,0">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>-->
+
+         <!--<TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+         <TextBlock Name="OffsetTxBl" Grid.Column="0" Grid.Row="3"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="OffsetTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
+         <TextBlock Name="ExtraLenTxBl" Grid.Column="0" Grid.Row="4"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="ExtraLenTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
+         <!--<TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
+            <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="4"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+         <!--<Grid Grid.Row="5" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1.5*"/>
+                    <ColumnDefinition Width="2"/>
+                    <ColumnDefinition Width="1.5*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                </Grid.RowDefinitions>
+
+                <Border Grid.Column="1" Grid.Row="0" Grid.RowSpan="4" Background="Black" />
+
+                <TextBlock Name="NumPzXTxBl" Grid.Column="0" Grid.Row="0"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <TextBlock Name="DimPzXTxBl" Grid.Column="2" Grid.Row="0"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+
+                <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                <EgtWPFLib:EgtTextBox Name="DimPzXTxBx" Grid.Column="2" Grid.Row="1" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}" />
+
+                <TextBlock Name="NumPzYTxBl" Grid.Column="0" Grid.Row="2"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <TextBlock Name="DimPzYTxBl" Grid.Column="2" Grid.Row="2"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+
+                <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                <EgtWPFLib:EgtTextBox Name="DimPzYTxBx" Grid.Column="2" Grid.Row="3" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}" />
+
+            </Grid>
+
+            <TextBlock Name="SideTxBl" Grid.Row="6" Grid.ColumnSpan="2"
+             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <CheckBox Name="SideChBx" Grid.Row="6" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Right" Margin="0,0,6,0"/>-->
+
+         <Grid Grid.Row="7" Grid.ColumnSpan="2">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+            <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+            <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+         </Grid>
+
+         <Grid Grid.Row="11" Grid.ColumnSpan="2">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
+
+      </Grid>
+
+   </Border>
+</UserControl>

DirectCuts/SquaringUC.xaml.vb

@@ -0,0 +1,442 @@
+Imports EgtUILib
+
+Public Class SquaringUC
+
+   ' Riferimenti a pagine
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   ' Flag di pagina attiva
+   Private m_bActive As Boolean = False
+   ' Flag di simulazione in corso
+   Private m_bSimul As Boolean = False
+
+   ' Origine tavola e dati grezzo
+   Private m_bRawOk As Boolean = False
+   Private m_ptTabOri As Point3d
+   Private m_ptRawMin As Point3d
+   Private m_ptRawMax As Point3d
+   ' Parametri P1 acquisito
+   Private m_ptTipP1 As Point3d
+   Private m_vtToolP1 As Vector3d
+   ' Parametri P2 acquisito
+   Private m_ptTipP2 As Point3d
+   Private m_vtToolP2 As Vector3d
+   ' Parametri della lavorazione
+   Private m_bCutOk As Boolean = False
+   Private m_dDepth As Double = 0
+   Private m_dOffsetSquaring As Double = 150
+   Private m_dExtraLength As Double = 0
+   Private m_dAngO As Double = 180
+   Private m_dAngV As Double = 0
+   Private m_nNumX As Integer = 0
+   Private m_dDimX As Double = 0
+   Private m_nNumY As Integer = 0
+   Private m_dDimY As Double = 0
+   Private m_bHeadSide As Boolean = False
+
+   ' Punto selezionato nel disegno
+   Private m_ptPrev As Point3d
+   ' Layer per crocette temporanee
+   Private m_nTempLay As Integer = GDB_ID.NULL
+
+   ' Costanti
+   Private Const MAX_TAB_DEPTH As Double = 10.0
+   Private Const MIN_CUT_LEN As Double = 10.0
+   Private Const MAX_SIDE_ANG As Double = 60.0
+
+   'Costante che indica il lato in cui posizionare i tagli
+   Private Enum CutSide As Integer
+      Left
+      Right
+   End Enum
+
+   Private Sub GridCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      OffsetTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 28)
+      ' 90260=Extra length
+      ExtraLenTxBl.Text = EgtMsg(90260)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+
+      ' Carico i dati dell'ultimo taglio
+      m_dOffsetSquaring = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_OFFSET_SQUARING, m_dOffsetSquaring, m_MainWindow.GetIniFile())
+      m_dExtraLength = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_EXTRA_LEN_SQUARING, m_dExtraLength, m_MainWindow.GetIniFile())
+      m_dDepth = 0
+      m_dAngO = 90
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_nNumX = 1
+      m_dDimX = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
+      m_nNumY = 1
+      m_dDimY = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMY, m_dDimY, m_MainWindow.GetIniFile())
+      m_bHeadSide = False
+   End Sub
+
+   Private Sub Squaring_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      ' Attivo la pagina
+      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_bActive = True
+      ' Se rientro da simulazione
+      If m_bSimul Then
+         m_bSimul = False
+         ' Disabilito registrazione progetto modificato
+         EgtDisableModified()
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+         Return
+      End If
+      ' Disabilito registrazione progetto modificato
+      EgtDisableModified()
+      ' Creo layer temporaneo per crocette
+      m_nTempLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
+      ' Origine tavola
+      m_bRawOk = True
+      If Not EgtGetTableRef(1, m_ptTabOri) Then
+         m_bRawOk = False
+         EgtOutLog("Error on TableRef1")
+      End If
+
+      ' Dati del grezzo
+      If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then
+         m_bRawOk = False
+         EgtOutLog("Error on RawBox")
+      End If
+      ' calcolo lalavorazione di squadratura
+      RefreshSquaring()
+   End Sub
+
+   Private Sub RefreshSquaring()
+      If Not m_bRawOk Then Return
+
+      Dim m_ThickSaw As Double
+      EgtTdbGetCurrToolParam(MCH_TP.THICK, m_ThickSaw)
+
+      m_dDepth = CamAuto.GetRawHeight()
+      m_dDimX = Math.Abs(m_ptRawMax.x - m_ptRawMin.x) - 2 * (m_dOffsetSquaring)
+      m_dDimY = Math.Abs(m_ptRawMax.y - m_ptRawMin.y) - 2 * (m_dOffsetSquaring)
+
+      Dim ptStart As New Point3d(m_ptRawMin.x + m_dOffsetSquaring - m_ThickSaw, m_ptRawMin.y + m_dOffsetSquaring, m_ptRawMin.z)
+      Dim ptEnd As New Point3d(ptStart.x + m_dDimX, ptStart.y, m_ptRawMin.z)
+
+      SetCoordVisibility(True)
+      ShowCoord()
+
+      OffsetTxBx.Text = LenToString(m_dOffsetSquaring, 1)
+      ExtraLenTxBx.Text = LenToString(m_dExtraLength, 1)
+      m_bCutOk = False
+      UpdateSimulOkBtn()
+
+      SquaringPoint(ptStart, ptEnd)
+      m_ptPrev = ptStart
+   End Sub
+
+   Friend Sub Squaring_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      ' Salvo i dati correnti
+      ' Salvo i dati correnti
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_OFFSET_SQUARING, DoubleToString(m_dOffsetSquaring, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_EXTRA_LEN_SQUARING, DoubleToString(m_dExtraLength, 2), m_MainWindow.GetIniFile())
+      ' Se non vado in simulazione
+      If Not m_bSimul Then
+         ' Dichiaro sottopagina da non riattivare
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
+         ' Rimuovo layer temporaneo per crocette
+         EgtErase(m_nTempLay)
+         ' Rimuovo eventuale pezzo per taglio diretto
+         EraseDirectCutPart()
+         ' Riattivo eventuali lavorazioni presenti
+         ActivateAllMachinings()
+         ' Abilito registrazione progetto modificato
+         EgtEnableModified()
+         ' Nascondo la macchina
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+      End If
+      ' Dichiaro pagina non attiva
+      m_bActive = False
+   End Sub
+
+   Private Sub UpdateSimulOkBtn()
+      If m_bCutOk Then
+         SimulBtn.IsEnabled = True
+         SimulBtn.Foreground = Brushes.Black
+         OkBtn.IsEnabled = True
+         OkBtn.Foreground = Brushes.Black
+      Else
+         SimulBtn.IsEnabled = False
+         SimulBtn.Foreground = Brushes.DarkGray
+         OkBtn.IsEnabled = False
+         OkBtn.Foreground = Brushes.DarkGray
+      End If
+   End Sub
+
+   Private Sub SquaringPoint(ptMin As Point3d, ptMax As Point3d)
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Verifico configurazione tavola e grezzo
+      If Not m_bRawOk Then Return
+
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+      '------------- BOTTOM LEFT -------------------
+      ' Assegno punto selezionato nel disegno a m_ptTipP1
+      m_ptTipP1 = ptMin
+      ' Porto il tip nell'origine tavola
+      m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
+      ' Reimposto eventuale precedente utensile
+      EgtSetCalcTool(sTool, sHead, nExit)
+      '-------------  TOP RIGHT   -------------------
+      ' Assegno punto selezionato nel disegno a m_ptTipP2
+      m_ptTipP2 = ptMax
+      ' Porto il tip nell'origine tavola
+      m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
+      ' Reimposto eventuale precedente utensile
+      EgtSetCalcTool(sTool, sHead, nExit)
+
+      ' Se il secondo punto non coincide con il primo, disegno il taglio
+      Dim vtDiff As Vector3d = m_ptTipP2 - m_ptTipP1
+      vtDiff.z = 0
+      Dim dLen As Double
+      Dim dAngVertDeg As Double
+      Dim dAngOrizzDeg As Double
+      vtDiff.ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
+      If dLen > EPS_SMALL Then
+         m_dAngO = dAngOrizzDeg
+         CreateGridCut()
+         ' visuliazzo tavola 
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+      End If
+   End Sub
+
+   Private Sub OffsetTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsetTxBx.EgtClosed
+      ' Verifico che l'offset impostato non sia superiore a quello massimo
+      Dim dMaxOffset As Double = Math.Min(m_dDimX, m_dDimY) / 2 - 15
+      Dim dOffset As Double = 0
+      StringToLen(OffsetTxBx.Text, dOffset)
+      If dOffset < 0 Then
+         dOffset = 0
+      ElseIf dOffset > dMaxOffset Then
+         dOffset = dMaxOffset
+      End If
+      m_dOffsetSquaring = dOffset
+      OffsetTxBx.Text = LenToString(m_dOffsetSquaring, 2)
+      ' Disegno il taglio
+      RefreshSquaring()
+      EgtDraw()
+   End Sub
+
+   Private Sub ExtraLength_EgtClosed(sender As Object, e As EventArgs) Handles ExtraLenTxBx.EgtClosed
+      ' Verifico che il valore indicato sia almeno maggiore dell'offset indicato
+      Dim dOffset As Double = 0
+      StringToLen(OffsetTxBx.Text, dOffset)
+      Dim MadExtraLeng As Double = Math.Abs(dOffset)
+      Dim dExtraLen As Double
+      StringToLen(ExtraLenTxBx.Text, dExtraLen)
+      If dExtraLen < 0 AndAlso dExtraLen < -MadExtraLeng Then
+         dExtraLen = 0
+      End If
+      m_dExtraLength = dExtraLen
+      ExtraLenTxBx.Text = LenToString(m_dExtraLength, 2)
+      ' Disegno il taglio
+      RefreshSquaring()
+      EgtDraw()
+   End Sub
+
+   Private Sub SimulBtn_Click(sender As Object, e As RoutedEventArgs) Handles SimulBtn.Click
+      ' Verifico ci sia un taglio valido
+      If Not m_bCutOk Then Return
+      ' Salvo il progetto con le lavorazioni
+      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\" & "DirectProj.nge"
+      m_MainWindow.m_CurrentProjectPageUC.SaveFile(sMchPath, False)
+      ' Predispongo passaggio a simulazione
+      m_bSimul = True
+      m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
+      m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
+      m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
+      m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
+      m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.Simulation
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+#If TRIAL Then
+      m_CurrProjPage.SetWarningMessage("Trial Version")
+#Else
+      ' Verifico non sia versione Ufficio
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
+      End If
+      ' Verifico ci sia un taglio valido
+      If Not m_bCutOk Then Return
+      ' Salvo il progetto con le lavorazioni
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\" & "DirectProj.nge"
+      m_MainWindow.m_CurrentProjectPageUC.SaveFile(sMchPath, False)
+      ' Genero file CNC (lancio anche se errore in precedenza)
+      Dim sCncPath As String = m_MainWindow.GetCncDir() & "\DirectCut" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+      Dim bOk As Boolean = EgtGenerate(sCncPath, "OmagCut ver." & m_MainWindow.GetVersion())
+      ' Se errore in generazione, segnalo l'errore ed esco
+      If Not bOk Then
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
+         Return
+      End If
+      ' Download programma (eventuali errori sono segnalati dalla funzione)
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+         ' copio il progetto corrente come progetto in lavorazione
+         Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
+         My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
+         ' lancio eventuale lua post-trasmissione
+         m_MainWindow.ExecSentProgScript(True)
+      End If
+#End If
+   End Sub
+
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
+   End Sub
+
+   Private Function CreateGridCut() As Boolean
+      ' Verifico sia definito il punto iniziale e il grezzo
+      If Not m_bRawOk Then
+         m_bCutOk = False
+         Return False
+      End If
+      ' Spessore grezzo
+      Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
+      ' Rimuovo eventuale vecchio pezzo per taglio diretto
+      EraseDirectCutPart()
+      ' Disattivo eventuali lavorazioni presenti
+      DeactivateAllMachinings()
+      ' Creo nuovo pezzo per il taglio diretto
+      Dim nPartId = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetName(nPartId, NAME_DIRECTCUT)
+      Dim nLayerId = EgtCreateGroup(nPartId)
+      EgtSetName(nLayerId, NAME_OUTLOOP)
+      ' Creo il taglio parallelo alla lama
+      Dim ptStart As Point3d = m_ptTipP1
+      ptStart.z = 0
+      ' Funzione che crea i tagli successivi al primo
+      MultiplyCut(nLayerId)
+      ' Calcolo punto di inserimento nel grezzo
+      Dim ptMin, ptMax As Point3d
+      EgtGetBBoxGlob(nPartId, GDB_BB.STANDARD, ptMin, ptMax)
+      Dim ptIns As Point3d = ptMin + (m_ptTabOri - m_ptRawMin)
+      ptIns.z = dRawHeight
+      ' Inserisco il pezzo nel grezzo
+      EgtAddPartToRawPart(nPartId, ptIns, m_MainWindow.m_CurrentProjectPageUC.m_nRawId)
+      ' Inserisco la lavorazione
+      m_bCutOk = AddMachinings(nPartId) AndAlso UpdateAllMachiningsToolpaths()
+      EgtSetCurrPhase(1)
+      ' Eventuale eliminazione Home finale
+      If Not m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome Then
+         RemoveFinalHome()
+      End If
+      UpdateSimulOkBtn()
+      Return m_bCutOk
+   End Function
+
+   Private Function MultiplyCut(nLayerId As Integer) As Boolean
+      ' Recupero lo spessore del taglio della lama o del waterjet correntemente attiva
+      Dim nType As Integer = 0
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      Dim dThick As Double = 0
+      EgtTdbGetCurrToolParam(If(nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
+      ' Ricalcolo lo spessore in base all'inclinazione
+      dThick = dThick / Math.Cos(m_dAngV * Math.PI / 180)
+      ' Imposto angolo di rotazione a seconda del lato dei tagli paralleli
+      Dim dRotAngOX As Double = 90
+      ' Recupero dati da interfaccia
+      Dim dDimPzX As Double = m_dDimX
+      Dim nNumPzX As Integer = m_nNumX
+      Dim dDimPzY As Double = m_dDimY
+      Dim nNumPzY As Integer = m_nNumY
+      ' Definisco vettore di spostamento
+      Dim vtDelta As Vector3d
+      ' Calcolo primo taglio parallelo
+      Dim ptStart As Point3d = m_ptTipP1
+      ptStart.z = 0
+      If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
+         Dim dLenX As Double = dThick + (dDimPzX + dThick) * nNumPzX
+         Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
+         ' Imposto affondamento e angolo di fianco sul taglio
+         EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
+         EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
+         ' Allungo la geometria
+         EgtExtendCurveStartByLen(nCutParaId, m_dOffsetSquaring + m_dExtraLength)
+         EgtExtendCurveEndByLen(nCutParaId, m_dOffsetSquaring + +m_dExtraLength)
+         ' Calcolo vettore di spostamento
+         vtDelta = Vector3d.FromPolar((dDimPzY + dThick), m_dAngO)
+         ' Ruoto il vettore di traslazione 
+         vtDelta.Rotate(Vector3d.Z_AX, dRotAngOX)
+         For Index As Integer = 1 To nNumPzY
+            Dim vtPerpMove As Vector3d = Index * vtDelta
+            ' Creo copie
+            Dim nCut2Id = EgtCopyGlob(nCutParaId, nLayerId)
+            EgtMove(nCut2Id, vtPerpMove, GDB_RT.GLOB)
+         Next
+         ' Calcolo primo taglio perpendicolare
+         Dim dLenY As Double = dThick + (dDimPzY + dThick) * nNumPzY
+         ' Arretro il punto di partenza di uno spessore lama
+         Dim vtDeltaPos As Vector3d = Vector3d.FromPolar(dThick + 0.1, m_dAngO - 90)
+         Dim nCutPerpId = EgtCreateLinePDL(nLayerId, ptStart + vtDeltaPos, m_dAngO + 90, dLenY + 0.2)
+         ' Imposto affondamento e angolo di fianco sul taglio
+         EgtSetInfo(nCutPerpId, INFO_DEPTH, m_dDepth)
+         EgtSetInfo(nCutPerpId, INFO_SIDE_ANGLE, m_dAngV)
+         ' Allungo la geometria
+         EgtExtendCurveStartByLen(nCutPerpId, m_dOffsetSquaring + m_dExtraLength)
+         EgtExtendCurveEndByLen(nCutPerpId, m_dOffsetSquaring + +m_dExtraLength)
+         ' Calcolo secondo vettore di spostamento
+         vtDelta = Vector3d.FromPolar((dDimPzX + dThick), m_dAngO)
+         For Index As Integer = 1 To nNumPzX
+            Dim vtPerpMove As Vector3d = vtDelta * Index
+            ' Creo copie
+            Dim nCut3Id = EgtCopyGlob(nCutPerpId, nLayerId)
+            EgtMove(nCut3Id, vtPerpMove, GDB_RT.GLOB)
+         Next
+      End If
+      Return True
+   End Function
+
+   Private Sub SetCoordVisibility(bShow As Boolean)
+      XcoordTxBl.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      XcoordTxBx.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      YcoordTxBl.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      YcoordTxBx.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+   End Sub
+
+   Private Sub ShowCoord()
+      Dim ptText As Point3d = m_ptPrev
+      ptText.ToLoc(New Frame3d(m_ptTabOri))
+      XcoordTxBx.Text = LenToString(ptText.x, 2)
+      YcoordTxBx.Text = LenToString(ptText.y, 2)
+   End Sub
+
+   Private Function SetMachineInCurrPos() As Boolean
+      ' Recupero la posizione macchina
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return False
+      ' Recupero il nome degli assi macchina
+      Dim sL1 As String = String.Empty
+      Dim sL2 As String = String.Empty
+      Dim sL3 As String = String.Empty
+      Dim sR1 As String = String.Empty
+      Dim sR2 As String = String.Empty
+      If Not m_MainWindow.m_CNCommunication.GetAxesNames(sL1, sL2, sL3, sR1, sR2) Then Return False
+      ' Visualizzo macchina in posizione
+      EgtSetAxisPos(sL1, dL1)
+      EgtSetAxisPos(sL2, dL2)
+      EgtSetAxisPos(sL3, dL3)
+      EgtSetAxisPos(sR1, dR1)
+      EgtSetAxisPos(sR2, dR2)
+      Return True
+   End Function
+
+End Class
+

DrawImport/AlzFrontUC.xaml

@@ -199,12 +199,12 @@
                                   Visibility="Collapsed"
                                   Grid.Column="2" Grid.Row="1"
                                   HorizontalAlignment="Right"
-                                  Width="60" Height="30" Margin="0,0,0,0"
+                                  Width="60" Height="30" Margin="0,0,0,0" IsLength="False"
                                   Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             <EgtWPFLib:EgtTextBox Name="Parameter2FTxBx" 
                                   Grid.Column="3" Grid.Row="1" 
                                   HorizontalAlignment="Right"
-                                  Width="60" Height="30" Margin="0,0,0,0"
+                                  Width="60" Height="30" Margin="0,0,0,0" IsLength="False"
                                   Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
             <!-- Spessore aletta -->

DrawImport/AlzFrontUC.xaml.vb

@@ -76,9 +76,9 @@ Public Class AlzFrontUC
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
 
       ' nome dei parametri condivisi
-      Parameter1TxBl.Text = "Altezza"
-      Parameter2TxBl.Text = "Delta angolo"
-      Parameter5TxBl.Text = "Spessore"
+      Parameter1TxBl.Text = EgtMsg(91134)
+      Parameter2TxBl.Text = EgtMsg(91135)
+      Parameter5TxBl.Text = EgtMsg(91136)
 
       EgtZoom(ZM.ALL)
    End Sub
@@ -96,8 +96,14 @@ Public Class AlzFrontUC
       Dim LabelId As Integer = GDB_ID.NULL
 
       ' definisco i valori delle altezza e degli angoli di spoglia per le alzatine e i frontalini (letti da file ini del programma)
-      GetPrivateProfileString(S_ALZFRONT, K_ALZ_HEIGHT, "0", Parameter1ATxBx.Text, m_MainWindow.GetIniFile)
-      GetPrivateProfileString(S_ALZFRONT, K_FRONT_HEIGHT, "0", Parameter1FTxBx.Text, m_MainWindow.GetIniFile)
+      Dim sVal As String = String.Empty
+      Dim dVal As Double = 0
+      GetPrivateProfileString(S_ALZFRONT, K_ALZ_HEIGHT, "0", sVal, m_MainWindow.GetIniFile)
+      Utility.StringToDouble(sVal, dVal)
+      Parameter1ATxBx.Text = Utility.LenToString(dVal, 4)
+      GetPrivateProfileString(S_ALZFRONT, K_FRONT_HEIGHT, "0", sVal, m_MainWindow.GetIniFile)
+      Utility.StringToDouble(sVal, dVal)
+      Parameter1FTxBx.Text = Utility.LenToString(dVal, 4)
       GetPrivateProfileString(S_ALZFRONT, K_ALZ_DELTA_ANG, "0", Parameter2ATxBx.Text, m_MainWindow.GetIniFile)
       GetPrivateProfileString(S_ALZFRONT, K_FRONT_DELTA_ANG, "0", Parameter2FTxBx.Text, m_MainWindow.GetIniFile)
       Parameter5TxBx.Text = Utility.LenToString(m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight, 2)
@@ -607,9 +613,9 @@ Public Class AlzFrontUC
    Private Sub ParameterA1TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter1ATxBx.EgtClosed
       ' Nuovo angolo di inclinazione
       Dim dValue As Double
-      StringToDouble(Parameter1ATxBx.Text, dValue)
+      StringToLen(Parameter1ATxBx.Text, dValue)
       ' salvo il valore nel file ini e inserisco il valore nel file lua
-      WritePrivateProfileString("Alz&Front", "A_Height", Parameter1ATxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString("Alz&Front", "A_Height", DoubleToString(dValue, 3), m_MainWindow.GetIniFile())
       ' aggiorno il disegno
       LoadCurrentCompo()
    End Sub
@@ -618,9 +624,9 @@ Public Class AlzFrontUC
    Private Sub Parameter1FTxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter1FTxBx.EgtClosed
       ' Nuovo angolo di inclinazione
       Dim dValue As Double
-      StringToDouble(Parameter1FTxBx.Text, dValue)
+      StringToLen(Parameter1FTxBx.Text, dValue)
       ' salvo il valore nel file ini e inserisco il valore nel file lua
-      WritePrivateProfileString("Alz&Front", "F_Height", Parameter1FTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString("Alz&Front", "F_Height", DoubleToString(dValue, 3), m_MainWindow.GetIniFile())
       ' aggiorno il disegno
       LoadCurrentCompo()
    End Sub

DrawImport/CompoDimensionUC.xaml.vb

@@ -37,7 +37,7 @@ Public Class CompoDimensionUC
       InternComponentBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 47)     ' Componenti interni
       If Not String.IsNullOrEmpty(sCompoDir) Then
          bEnableAlzFront = True
-         AlzFrontBtn.Content = "Alzatine & Frontalini"
+         AlzFrontBtn.Content = EgtMsg(91137)
       Else
          AlzFrontBtn.Visibility = Visibility.Collapsed
       End If
@@ -75,6 +75,7 @@ Public Class CompoDimensionUC
          m_DrawPage.sCompoName.StartsWith("PBagno") Then
          ShowInternalBtn(True)
          ShowAlzFrontBtn(bEnableAlzFront)
+         m_DrawPage.MessageGrid.Visibility = Visibility.Hidden
       Else
          ShowInternalBtn(False)
          ShowAlzFrontBtn(False)
@@ -106,8 +107,10 @@ Public Class CompoDimensionUC
    Friend Sub ShowAlzFrontBtn(ByVal value As Boolean)
       If value Then
          AlzFrontBtn.Visibility = Visibility.Visible
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Hidden
       Else
          AlzFrontBtn.Visibility = Visibility.Hidden
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Visible
       End If
    End Sub
 
@@ -336,6 +339,7 @@ Public Class CompoDimensionUC
             Dim nCmpInfo As Integer = 0
             If EgtGetInfo(nId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
                EgtSetStatus(nId, GDB_ST.OFF)
+               UpdateInLoopReference(nCmp)
                Exit While
             End If
             nId = EgtGetNextName(nId, "HoleLabels")
@@ -379,5 +383,42 @@ Public Class CompoDimensionUC
       EgtDraw()
    End Sub
 
+   Private Sub UpdateInLoopReference(nCmp As Integer)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               Dim LocalList As New List(Of Integer) From {nIdInLoop}
+               m_DrawPage.m_FiloTopUC.CreateFiloTopPreView(LocalList)
+               EgtSetStatus(nLayFiloTop, GDB_ST.ON_)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
+   ' riceve la info "ID" della componente
+   Public Sub SetStatusVisibilityInLoopReference(nCmp As Integer, Status As GDB_ST)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               EgtSetStatus(nLayFiloTop, Status)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
 #End Region    ' METHODS for InternalCompo
 End Class

DrawImport/CompoTrfData.xaml.vb

@@ -24,6 +24,7 @@ Public Class CompoTrfData
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       DialogResult = True
+      SaveData()
       Close()
    End Sub
 
@@ -32,7 +33,30 @@ Public Class CompoTrfData
       Close()
    End Sub
 
+   Private Sub SaveData()
+      WritePrivateProfileString(S_TRF, K_ORDCODE, OrdCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_ORDDESC, OrdDescTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_PARTCODE, PartCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_MATCODE, MatCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_SURFCODE, SurfCodeTxBx.Text, m_MainWindow.GetIniFile())
+      ' prima di salvare lo spessore converto in mm e poi di nuovo in stringa
+      Dim dVal As Double = 0
+      StringToLen(ThicknessTxBx.Text, dVal)
+      WritePrivateProfileString(S_TRF, K_TRFTHICKNESS, DoubleToString(dVal, 4), m_MainWindow.GetIniFile())
+   End Sub
+
    Friend Sub SetData(sOrdCode As String, sOrdDesc As String, sPartCode As String, sMatCode As String, sSurfCode As String, dTh As Double)
+      ' se verifico che non sono stati iniziliazzti i campi allora provvedo a leggere il file ini del programma
+      If sOrdCode = "" And sOrdDesc = "" And sPartCode = "" And sMatCode = "" And sSurfCode = "" Then
+         GetPrivateProfileString(S_TRF, K_ORDCODE, sOrdCode, sOrdCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_ORDDESC, sOrdDesc, sOrdDesc, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_PARTCODE, sPartCode, sPartCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_MATCODE, sMatCode, sMatCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_SURFCODE, sSurfCode, sSurfCode, m_MainWindow.GetIniFile())
+         ' recupero il dato dello spessore che deve essere in mm
+         dTh = GetPrivateProfileDouble(S_TRF, K_TRFTHICKNESS, dTh, m_MainWindow.GetIniFile())
+      End If
+      ' inizializzo i campi della finestra
       OrdCodeTxBx.Text = sOrdCode
       OrdDescTxBx.Text = sOrdDesc
       PartCodeTxBx.Text = sPartCode

DrawImport/DrawPageUC.xaml

@@ -64,7 +64,7 @@
                <ToggleButton Name="DimensionBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowToggleButton}" Visibility="Collapsed"/>
             </Grid>
 
-            <Grid Name="VariablesGrd" Grid.Row="1" Grid.ColumnSpan="2"/>
+            <Grid Name="VariablesGrd" Grid.Row="1" Grid.RowSpan="2" Grid.ColumnSpan="2"/>
             
             <Grid Name="MessageGrid" Grid.Row="2" Grid.ColumnSpan="2">
                <TextBlock Name="MessageTxBl" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
@@ -124,7 +124,7 @@
 
             <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"
                TextAlignment="Right"/>
-            <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60"
+            <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
             </Grid>

DrawImport/DrawPageUC.xaml.vb

@@ -41,6 +41,9 @@ Public Class DrawPageUC
    Friend m_bDrawOk As Boolean = False
    Private m_bFirst As Boolean = True
 
+   Private m_SelListHole As New List(Of Integer)
+   Private m_DeselectListHole As New List(Of Integer)
+
    ' questa variabile serve per risalire al nome della componente che ospita i componenti interni att
    Friend m_sMainCompo As String = String.Empty
 
@@ -280,6 +283,19 @@ Public Class DrawPageUC
       m_sCsvOrder = ""
       m_sCsvList = ""
       m_sCsvName = ""
+
+      ' Visuliazzazione dei bottoni per modifica dei componenti
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         SideAngleBtn.Visibility = Visibility.Hidden
+         FiloTopBtn.Visibility = Visibility.Hidden
+         EngraveBtn.Visibility = Visibility.Hidden
+         DripCutBtn.Visibility = Visibility.Hidden
+      Else
+         SideAngleBtn.Visibility = Visibility.Visible
+         FiloTopBtn.Visibility = Visibility.Visible
+         EngraveBtn.Visibility = Visibility.Visible
+         DripCutBtn.Visibility = Visibility.Visible
+      End If
    End Sub
 
    ' recupero il click sulla scena ed assegno il metodo a secondo della pagina aperta
@@ -360,6 +376,8 @@ Public Class DrawPageUC
          Dim nCmpInfo As Integer = 0
          If EgtGetInfo(nHLId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
             EgtSetStatus(nHLId, GDB_ST.ON_)
+            ' nascondo eventuali FiloTop
+            m_CompoDimension.SetStatusVisibilityInLoopReference(nCmp, GDB_ST.OFF)
             Exit While
          End If
          nHLId = EgtGetNextName(nHLId, "HoleLabels")
@@ -462,21 +480,25 @@ Public Class DrawPageUC
                   EgtDeselectObj(nId)
                   EgtDeselectObj(nLayId)
                   Dim sLayName As String = ""
-                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-                     EgtRemoveInfo( nLayId, INFO_FILOTOP)
-                     EgtRemoveInfo( nLayId, INFO_OFFSET)
-                     EgtRemoveInfo( nLayId, INFO_DEPTH)
-                     EgtResetColor( nLayId)
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+                     EgtRemoveInfo(nLayId, INFO_FILOTOP)
+                     EgtRemoveInfo(nLayId, INFO_OFFSET)
+                     EgtRemoveInfo(nLayId, INFO_DEPTH)
+                     EgtResetColor(nLayId)
                   End If
+                  m_DeselectListHole.Add(nLayId)
+                  m_SelListHole.Remove(nLayId)
                Else
                   Dim sLayName As String = ""
-                  If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
-                     EgtSelectObj( nId)
-                     EgtSelectObj( nLayId)
-                     EgtSetInfo( nLayId, INFO_FILOTOP, 1)
-                     EgtSetInfo( nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
-                     EgtSetInfo( nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
-                     EgtSetColor( nLayId, New Color3d(255, 255, 255))
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
+                     EgtSelectObj(nId)
+                     EgtSelectObj(nLayId)
+                     EgtSetInfo(nLayId, INFO_FILOTOP, 1)
+                     EgtSetInfo(nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
+                     EgtSetInfo(nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
+                     EgtSetColor(nLayId, New Color3d(255, 255, 255))
+                     m_SelListHole.Add(nLayId)
+                     m_DeselectListHole.Remove(nLayId)
                   End If
                End If
                EgtDraw()
@@ -484,6 +506,8 @@ Public Class DrawPageUC
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      m_FiloTopUC.CreateFiloTopPreView(m_SelListHole)
+      m_FiloTopUC.EraseFiloTopPreview(m_DeselectListHole)
    End Sub
 
    Private Sub OnShowDistanceVector(sender As Object, vtDist As Vector3d) Handles DrawScene.OnShowDistanceVector
@@ -542,6 +566,7 @@ Public Class DrawPageUC
       OkBtn.IsEnabled = True
    End Sub
 
+   ' Navigazione nelle due pagine per la selezione dei componenti da disegnare
    Friend Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       DrawPage_Unloaded(sender, e)
@@ -633,10 +658,17 @@ Public Class DrawPageUC
          m_CompoDimension.GetNameEdit(j).Text = m_CVars(i - 1).m_sName
          m_CompoDimension.GetNameEdit(j).Visibility = Windows.Visibility.Visible
          m_CompoDimension.GetValueEdit(j).Text = m_CVars(i - 1).ToString()
+         'Dim dVal As Double
+         'StringToLen(m_CVars(i - 1).ToString(), dVal)
+         'm_CompoDimension.GetValueEdit(j).Text = LenToString(dVal, 3)
          m_CompoDimension.GetValueEdit(j).Visibility = Windows.Visibility.Visible
          If m_CVars(i - 1).m_nType = 5 Then
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).Keyboard = EgtTextBox.KeyboardType.Alphanumeric
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).KeyboardDimension = 600
+         ElseIf m_CVars(i - 1).m_nType = 4 Then
+            TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).Keyboard = EgtTextBox.KeyboardType.Calculator
+            TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).IsLength = False
+            TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).KeyboardDimension = 300
          Else
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).Keyboard = EgtTextBox.KeyboardType.Calculator
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).KeyboardDimension = 300
@@ -1106,6 +1138,33 @@ Public Class DrawPageUC
       Return True
    End Function
 
+   Private Function MakeSectionFrameInsert(ByVal nNbr As Integer) As Boolean
+      ' m_MainWindow.m_ImportPageUC.LoadFrame()
+      ' recupero il primo layer del primo pezzo
+      Dim nLayerId As Integer = EgtGetFirstLayer(EgtGetFirstPart())
+      If nLayerId = GDB_ID.NULL Then Return False
+      ' percorso in cui salvare tempora
+      Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\Frame.Nge"
+      If Not EgtSaveObjToFile(nLayerId, sTmpFile, NGE.BIN) Then Return False
+      ' Passo al contesto principale
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' Inserisco il pezzo
+      If Not My.Computer.FileSystem.FileExists(sTmpFile) Then Return False
+      ' eseguo inserimento
+      For i As Integer = 1 To nNbr
+         EgtInsertFile(sTmpFile)
+         ' Ne recupero l'Id
+         Dim nPartId As Integer = EgtGetLastPart()
+         ' Creo la cornice
+         m_MainWindow.m_FrameCutPageUC.CreateFrame(nPartId)
+         ' Ricalcolo lavorazioni
+         AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
+      Next
+      ' Cancello il file
+      My.Computer.FileSystem.DeleteFile(sTmpFile)
+      Return True
+   End Function
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_bBackFromInternalCompo = False
       m_bInternalCompo = False
@@ -1121,7 +1180,12 @@ Public Class DrawPageUC
       Dim InsNbr As Integer = Int32.Parse(PartNumTxBx.Text)
       ' Passo al contesto principale
       'MakeInsert(InsNbr, sPartName)
-      MakeMultipleInsert(InsNbr, sPartName)
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         MakeSectionFrameInsert(InsNbr)
+      Else
+         MakeMultipleInsert(InsNbr, sPartName)
+      End If
+
       ' Aggiorno ambiente principale
       EgtZoom(ZM.ALL)
       ' Elimino nome del componente precedente
@@ -1135,7 +1199,7 @@ Public Class DrawPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
 
    End Sub
 
@@ -1156,14 +1220,16 @@ Public Class DrawPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
    End Sub
 
    Private Sub TrfDataBtn_Click(sender As Object, e As RoutedEventArgs) Handles TrfDataBtn.Click
       If m_bTrfData Then
          Dim DlgTrfData As New CompoTrfData(m_MainWindow)
+         ' carico i dati appena salvati nella pagina
          DlgTrfData.SetData(m_TrfOrderCode, m_TrfOrderDesc, m_TrfPartCode, m_TrfMatCode, m_TrfSurfCode, m_TrfThickness)
          If DlgTrfData.ShowDialog() Then
+            ' recupero i dati salvati nella pagina
             DlgTrfData.GetData(m_TrfOrderCode, m_TrfOrderDesc, m_TrfPartCode, m_TrfMatCode, m_TrfSurfCode, m_TrfThickness)
          End If
       ElseIf m_bCsvData Then
@@ -1242,6 +1308,8 @@ Public Class DrawPageUC
    Private Sub EngraveBtn_Click(sender As Object, e As RoutedEventArgs) Handles EngraveBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       If EngraveBtn.IsChecked Then
+         ' Aumento lo spazio disponibile per inserirei i parametri (tolgo spazio ad eventuali messaggi)
+         Grid.SetRowSpan(VariablesGrd, 2)
          ' Imposto modalità
          m_SideAngleUC.m_Mode = SideAngleUC.ModeOpt.ENGRAVE
          If m_ActiveComponentPage = Pages.CompoDimension Then
@@ -1273,6 +1341,7 @@ Public Class DrawPageUC
          EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
          EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
       Else
+         Grid.SetRowSpan(VariablesGrd, 2)
          VariablesGrd.Children.Remove(m_SideAngleUC)
          If m_PrevSideAnglePage = Pages.CompoDimension Then
             VariablesGrd.Children.Add(m_CompoDimension)
@@ -1362,6 +1431,8 @@ Public Class DrawPageUC
    End Sub
 
    Private Sub FiloTopBtn_Click(sender As Object, e As RoutedEventArgs) Handles FiloTopBtn.Click
+      m_SelListHole.Clear()
+      m_DeselectListHole.Clear()
       m_SceneButtons.MeasureBtn.IsChecked = False
       If FiloTopBtn.IsChecked Then
          ' Imposto modalità
@@ -1375,25 +1446,25 @@ Public Class DrawPageUC
             m_PrevSideAnglePage = Pages.AlzFront
             LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
          End If
-         VariablesGrd.Children.Add( m_FiloTopUC)
+         VariablesGrd.Children.Add(m_FiloTopUC)
          SideAngleBtn.IsEnabled = False
          EngraveBtn.IsEnabled = False
          DripCutBtn.IsEnabled = False
          MessageGrid.Visibility = Windows.Visibility.Hidden
          BackBtn.Visibility = Windows.Visibility.Hidden
-         MessageTxBx.Text = EgtMsg( MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+         MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
          ' In ogni caso, nascondo layer delle misure
-         Dim PartId As Integer = EgtGetFirstInGroup( GDB_ID.ROOT)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_AUX), GDB_ST.OFF)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
+         Dim PartId As Integer = EgtGetFirstInGroup(GDB_ID.ROOT)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_AUX), GDB_ST.OFF)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
       Else
-         VariablesGrd.Children.Remove( m_FiloTopUC)
+         VariablesGrd.Children.Remove(m_FiloTopUC)
          If m_PrevSideAnglePage = Pages.CompoDimension Then
-            VariablesGrd.Children.Add( m_CompoDimension)
+            VariablesGrd.Children.Add(m_CompoDimension)
          ElseIf m_PrevSideAnglePage = Pages.InternalComponent Then
-            LeftButtonGrd.Children.Add( m_CompoDimension.m_InternalCompoPage)
+            LeftButtonGrd.Children.Add(m_CompoDimension.m_InternalCompoPage)
          End If
          SideAngleBtn.IsEnabled = m_bEnableSideAngle
          EngraveBtn.IsEnabled = True
@@ -1467,7 +1538,10 @@ Public Class DrawPageUC
             Case 2        ' intero
                Return m_nVal.ToString()
             Case 3        ' lunghezza
-               Return DoubleToString(EgtToUiUnits(m_dVal), 4)
+               'Dim dVal As Double
+               'StringToLen(m_sVal, dVal)
+               Return LenToString(m_dVal, 4)
+               'Return DoubleToString(EgtToUiUnits(m_dVal), 4)
             Case 4        ' double
                Return DoubleToString(m_dVal, 4)
             Case 5        ' stringa
@@ -1492,12 +1566,13 @@ Public Class DrawPageUC
                End If
             Case 3        ' lunghezza
                Dim dVal As Double
-               If StringToDouble(sVal, dVal) Then
-                  If bConvertUnits Then
-                     m_dVal = EgtFromUiUnits(dVal)
-                  Else
-                     m_dVal = dVal
-                  End If
+               If bConvertUnits Then
+                  StringToLen(sVal, dVal)
+                  m_dVal = dVal
+                  Return True
+               Else
+                  StringToDouble(sVal, dVal)
+                  m_dVal = dVal
                   Return True
                End If
             Case 4        ' double

DrawImport/FiloTopUC.xaml

@@ -41,7 +41,11 @@
                FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
       <EgtWPFLib:EgtTextBox Name="Parameter2TxBx" Grid.Column="1" Grid.Row="11" Width="90"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-
-   </Grid>
+      <TextBlock Name="Parameter3TxBl" Grid.Row="12" Text="Arrotonda"
+               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+      <CheckBox Name="Parameter3ChBx" Grid.Row="12" Grid.Column="1" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Center" Margin="0,0,6,0"/>
+    </Grid>
 
 </UserControl>

DrawImport/FiloTopUC.xaml.vb

@@ -7,6 +7,8 @@ Public Class FiloTopUC
    ' Riferimento alla pagina che ha aperto SideAngleUC
    Private m_CallingPage As MainWindow.Pages
 
+   Private m_SelList As New List(Of Integer)
+
    ' Offset della sfilettatura
    Private m_dFiloTopOffset As Double = 0
    Friend ReadOnly Property FiloTopOffset As Double
@@ -23,6 +25,13 @@ Public Class FiloTopUC
       End Get
    End Property
 
+   ' esegue l'arrotindamento sugli angoli del percorso utensile
+   Private m_bCornerradius As Boolean = False
+   Friend ReadOnly Property bCornerRadius As Boolean
+      Get
+         Return m_bCornerradius
+      End Get
+   End Property
 
    Private Sub FiloTopUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Imposto riferimenti ad altre pagine
@@ -30,7 +39,8 @@ Public Class FiloTopUC
 
       ' Imposto messaggi
       ParameterTxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 10)       ' Offset
-      Parameter2TxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter2TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter3TxBl.Text = EgtMsg(91138)
 
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Imposto questa come pagina correntemente visualizzata nella drawpage
@@ -43,14 +53,18 @@ Public Class FiloTopUC
       End If
 
       ' Gestisco visualizzazione dei parametri
-      Parameter2TxBl.Visibility = Windows.Visibility.Visible
+      ParameterTxBl.Visibility = Windows.Visibility.Visible
       Parameter2TxBx.Visibility = Windows.Visibility.Visible
+      Parameter3TxBl.Visibility = Windows.Visibility.Visible
 
       ' Aggiorno valori
       m_dFiloTopOffset = GetPrivateProfileDouble( S_SIDES, K_FILOTOPOFFSET, 5, m_MainWindow.GetIniFile())
       ParameterTxBx.Text = LenToString( m_dFiloTopOffset, 3)
       m_dFiloTopDepth = GetPrivateProfileDouble( S_SIDES, K_FILOTOPDEPTH, 5, m_MainWindow.GetIniFile())
-      Parameter2TxBx.Text = LenToString( m_dFiloTopDepth, 3)
+      Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
+      m_bCornerradius = GetPrivateProfileInt(S_SIDES, K_ROUNDOFF, 0, m_MainWindow.GetIniFile()) <> 0
+      Parameter3ChBx.IsChecked = m_bCornerradius
+      m_SelList.Clear()
    End Sub
 
    Private Sub FiloTopUC_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
@@ -74,6 +88,8 @@ Public Class FiloTopUC
          End While
          nPartId = EgtGetNextPart(nPartId)
       End While
+      ' aggiorno la preview
+      CreateFiloTopPreView(m_SelList, False)
    End Sub
 
    Private Sub Parameter2TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter2TxBx.EgtClosed
@@ -95,4 +111,161 @@ Public Class FiloTopUC
       End While
    End Sub
 
+   Private Sub Parameter3ChBx_Checked() Handles Parameter3ChBx.Click
+      ' Assegno il valore
+      m_bCornerradius = Parameter3ChBx.IsChecked
+      WritePrivateProfileString(S_SIDES, K_ROUNDOFF, If(m_bCornerradius, "1", "0"), m_MainWindow.GetIniFile())
+      ' Aggiorno le info del profilo
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_ROUNDOFF, If(m_bCornerradius, 1, 0))
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      ' aggiorno la preview (False = blocco la lettura dei dati della componente)
+      CreateFiloTopPreView(m_SelList, False)
+   End Sub
+
+   Public Sub CreateFiloTopPreView(SelList As List(Of Integer), Optional bReadInfo As Boolean = True)
+      m_SelList = SelList
+      If m_SelList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            ' verifico che lemento corrente appartenga all'elenco degli elementi selezionati
+            Dim bIsSelected As Boolean = m_SelList.Find(Function(value As Integer)
+                                                           Return value = nLayId
+                                                        End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' verifico il Layer "FiloTop" sia associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer "FiloTop"
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' lo creo
+                  nLayFiloTop = EgtCreateGroup(nPartId)
+                  EgtSetName(nLayFiloTop, "FiloTop")
+                  EgtSetInfo(nLayFiloTop, "InLoopRef", nLayId)
+                  EgtSetInfo(nLayId, "FiloTopRef", nLayFiloTop)
+               End If
+
+               ' carico i dati del filo top selezionato
+               If bReadInfo Then
+                  EgtGetInfo(nLayFiloTop, INFO_OFFSET, m_dFiloTopOffset)
+                  ParameterTxBx.Text = LenToString(m_dFiloTopOffset, 3)
+                  EgtGetInfo(nLayFiloTop, INFO_DEPTH, m_dFiloTopDepth)
+                  Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
+                  Dim nVal As Integer = If(m_bCornerradius, 1, 0)
+                  EgtGetInfo(nLayFiloTop, INFO_ROUNDOFF, nVal)
+                  Parameter3ChBx.IsChecked = If(nVal = 1, True, False)
+                  m_bCornerradius = Parameter3ChBx.IsChecked
+               End If
+
+               ' procedo alla creazione della curva
+               Dim nIdCompoCurve As Integer = GDB_ID.NULL
+               ' cancello un eventuale curva composita creata in precedenza
+               nIdCompoCurve = EgtGetFirstNameInGroup(nLayFiloTop, "OffsetPreView")
+               If nIdCompoCurve <> GDB_ID.NULL Then
+                  EgtErase(nIdCompoCurve)
+               End If
+               Dim nCompoCurve As New List(Of Integer)
+               ' costruisco il percorso chiuso dati i lati di contorno 
+               Dim nLine As Integer = EgtGetFirstInGroup(nLayId)
+               While nLine <> GDB_ID.NULL
+                  nCompoCurve.Add(nLine)
+                  nLine = EgtGetNext(nLine)
+               End While
+               Dim PtNearStart As Point3d
+               Dim nInfoRoundOff As Integer = If(m_bCornerradius, 1, 0)
+
+               nIdCompoCurve = EgtCreateCurveCompoByChain(nLayFiloTop, nCompoCurve.ToArray, PtNearStart, False)
+               EgtSetName(nIdCompoCurve, "OffsetPreView")
+
+               ' salvo i dati nel layer FiloTop
+               EgtSetInfo(nLayFiloTop, INFO_OFFSET, m_dFiloTopOffset)
+               EgtSetInfo(nLayFiloTop, INFO_DEPTH, m_dFiloTopDepth)
+               EgtSetInfo(nLayFiloTop, INFO_ROUNDOFF, nInfoRoundOff)
+
+               Dim bOk As Boolean = False
+               ' leggo che tipo di offset applicare (Round, Extend)
+               If nInfoRoundOff <> 1 Then
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dFiloTopOffset, OFF_TYPE.EXTEND)
+               Else
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dFiloTopOffset, OFF_TYPE.FILLET)
+               End If
+
+               ' se la generazione della curva non va a buon fine
+               If Not bOk Then
+                  EgtErase(nLayFiloTop)
+                  EgtRemoveInfo(nLayId, "FiloTopRef")
+                  EgtOutLog("Error in generation OffsetPreView in TopEgde ")
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+               nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+   ' riceve la lista dei LayerFiloTop che devono essere eliminati
+   Public Sub EraseFiloTopPreview(EraseList As List(Of Integer))
+      Dim m_EraseList As List(Of Integer) = EraseList
+      If m_EraseList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            Dim bIsSelected As Boolean = m_EraseList.Find(Function(value As Integer)
+                                                             Return value = nLayId
+                                                          End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' cerco il Layer associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' esco 
+                  Return
+               Else
+                  ' lo elimino
+                  EgtErase(nLayFiloTop)
+                  EraseList.Remove(nLayId)
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+
 End Class

DrawImport/ImportPageUC.xaml

@@ -49,15 +49,28 @@
             <Grid.RowDefinitions>
                <RowDefinition Height="0.5*"/>
                <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="8*"/>
+               <RowDefinition Height="7.25*"/>
+               <RowDefinition Height="0.75*"/>
                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
             <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
             <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
-                ItemsSource="{Binding ItemList}"/>
+                     ItemsSource="{Binding ItemList}"/>
 
-            <Border Name="MessageBrd" Grid.Row="4" BorderThickness="0,1,0,0" BorderBrush="Gray">
+                <Grid Name="FinderGrd"  Grid.Row="3" Margin="0,0,8,0">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="4*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <EgtWPFLib:EgtTextBox Name="FindTxBx" Grid.Column="0"
+                               Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}"/>
+                    <Button Name="ClearFindBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Margin="0,6,2,6">
+                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}" Width="30" />
+                    </Button>
+                </Grid> 
+            
+            <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
                <TextBlock Name="MessageTxBx" TextAlignment="Center"
                    Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
             </Border>
@@ -101,7 +114,7 @@
 
                <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
                   TextAlignment="Right"/>
-               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60"
+               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             </Grid>
 

DrawImport/ImportPageUC.xaml.vb

@@ -19,6 +19,9 @@ Public Class ImportPageUC
    Friend WithEvents ImportScene As New Scene
    Private ImportSceneHost As New System.Windows.Forms.Integration.WindowsFormsHost
 
+   Private m_SelListHole As New List(Of Integer)
+   Private m_DeselectListHole As New List(Of Integer)
+
    ' Properties
    Private m_sCurrDir As String = String.Empty
    Private m_sCurrFile As String = String.Empty
@@ -101,6 +104,8 @@ Public Class ImportPageUC
       ' abilitazione Ordine e Distinta per importazione DXF
       m_bEnableOrderList = (m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut And
                             GetPrivateProfileInt(S_COMPO, K_CSVDATA, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' rendo visibilie il pulsante di ricerca file
+      FinderGrd.Visibility = Visibility.Visible
 
       If m_bFirst Then
          ' imposto colore di default
@@ -196,7 +201,6 @@ Public Class ImportPageUC
       PartNumTxBx.Text = "1"
       ' disabilito ok
       OkBtn.IsEnabled = False
-
    End Sub
 
    Private Sub LoadGridData()
@@ -297,6 +301,36 @@ Public Class ImportPageUC
       End Select
    End Sub
 
+   Private Sub FindTxBx_EgtClosed(sender As Object, e As EventArgs) Handles FindTxBx.EgtClosed
+      ' Elimino spazi iniziali e finali
+      FindTxBx.Text = FindTxBx.Text.Trim()
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      Dim UpdateListFile As New List(Of IconListBoxItem)
+      ' Se esiste un nome
+      If Not String.IsNullOrWhiteSpace(FindTxBx.Text) Then
+         For Each Item As IconListBoxItem In FileListBox.ItemsSource
+            If Item.Name.ToLower.Contains(FindTxBx.Text.ToLower) Then
+               UpdateListFile.Add(Item)
+            End If
+         Next
+      End If
+      If UpdateListFile.Count > 0 Then
+         FileListBox.ItemsSource = UpdateListFile
+      Else
+         FileListBox.ItemsSource = m_MainWindow.m_ImportItemList
+      End If
+   End Sub
+
+   Private Sub ClearFindBtn_Click() Handles ClearFindBtn.Click
+      ' svuoto la text
+      FindTxBx.Text = ""
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      ' e aggiorno la lista dei file
+      FileListBox.ItemsSource = m_MainWindow.m_ImportItemList
+   End Sub
+
    Private Function ClearView() As Boolean
       ' Pulisco il DB geometrico locale
       EgtNewFile()
@@ -315,7 +349,7 @@ Public Class ImportPageUC
    End Function
 
    Private Function LoadCurrFile() As Boolean
-      ' Pulisco il DB geometrico locale
+      ' Pulisco il DB geometrico locale      
       Dim bOk As Boolean = EgtNewFile()
       ' Costruisco path completa del file
       Dim sPath = IO.Path.Combine(m_sCurrDir, m_sCurrFile)
@@ -385,7 +419,7 @@ Public Class ImportPageUC
             DripCutBtn.IsEnabled = False
             DripDrillBtn.IsEnabled = False
          End If
-      ' altrimenti import per cornici
+         ' altrimenti import per cornici
       Else
          mmBtn.IsEnabled = (m_nFileType = FT.DXF)
          inchBtn.IsEnabled = (m_nFileType = FT.DXF)
@@ -539,6 +573,8 @@ Public Class ImportPageUC
                         EgtSetColor(nEntId, New Color3d(127, 63, 0))
                         nEntId = EgtGetNext( nEntId)
                      End While
+                     m_DeselectListHole.Add(nLayId)
+                     m_SelListHole.Remove(nLayId)
                   End If
                Else
                   Dim nLayId As Integer = GDB_ID.NULL
@@ -555,6 +591,8 @@ Public Class ImportPageUC
                         EgtSetColor(nEntId, New Color3d(255, 255, 255))
                         nEntId = EgtGetNext( nEntId)
                      End While
+                     m_SelListHole.Add(nLayId)
+                     m_DeselectListHole.Remove(nLayId)
                   End If
                End If
                EgtDraw()
@@ -562,6 +600,12 @@ Public Class ImportPageUC
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      m_FiloTopUC.CreateFiloTopPreView(m_SelListHole)
+      m_FiloTopUC.EraseFiloTopPreview(m_DeselectListHole)
+      If m_SelListHole.Count > 0 Then
+         MessageTxBx.Text = ""
+         MessageBrd.Background = Brushes.Transparent
+      End If
    End Sub
 
    Private Sub OnShowDistanceVector(sender As Object, vtDist As Vector3d) Handles ImportScene.OnShowDistanceVector
@@ -809,7 +853,7 @@ Public Class ImportPageUC
          PartId = EgtGetNextPart(PartId)
       End While
 
-      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      ' identificativo univoico del gruppo di pezzi, se più di un "Repeat"
       Dim sGUICode As New List(Of String)
 
       ' Scrivo testi per nesting
@@ -851,6 +895,7 @@ Public Class ImportPageUC
          EgtInsertFile(sTmpFile)
 
          Dim FirstOfImport As Integer = EgtGetNextPart(nFirst2Id)
+         If FirstOfImport = GDB_ID.NULL Then FirstOfImport = EgtGetFirstPart()
          Dim Index As Integer = 1
          While FirstOfImport <> GDB_ID.NULL And Index <= sGUICode.Count
             If Not String.IsNullOrEmpty(sGUICode(Index - 1)) Then
@@ -887,6 +932,7 @@ Public Class ImportPageUC
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
+
       ' Ciclo sui pezzi inseriti
       nId = nFirstId
       While nId <> GDB_ID.NULL
@@ -1008,6 +1054,7 @@ Public Class ImportPageUC
 
    Private Sub SideAngleBtn_Click(sender As Object, e As RoutedEventArgs) Handles SideAngleBtn.Click
       If SideAngleBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni per percorsi interni
          AdjustSelectRegions()
          ' Dichiaro nessuna selezione
@@ -1030,6 +1077,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1060,6 +1108,7 @@ Public Class ImportPageUC
 
    Private Sub DripCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles DripCutBtn.Click
       If DripCutBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Dichiaro nessuna selezione
          m_nSelectedPart = GDB_ID.NULL
          m_nSelectedLayer = GDB_ID.NULL
@@ -1080,6 +1129,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_SideAngleUC)
@@ -1110,6 +1160,7 @@ Public Class ImportPageUC
 
    Private Sub DripDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles DripDrillBtn.Click
       If DripDrillBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni di selezione per percorsi interni
          AdjustSelectRegions()
          ' Imposto modalità fori da sotto
@@ -1128,6 +1179,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 15)   ' Selezionare uno o più fori
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1155,6 +1207,7 @@ Public Class ImportPageUC
 
    Private Sub FiloTopBtn_Click(sender As Object, e As RoutedEventArgs) Handles FiloTopBtn.Click
       If FiloTopBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni per percorsi interni
          AdjustSelectRegions()
          ' Dichiaro nessuna selezione
@@ -1176,6 +1229,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno interno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible

DrawImport/MainComponentPageUC.xaml.vb

@@ -41,6 +41,7 @@ Public Class MainComponentPageUC
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.m_bBackFromInternalCompo = False
    End Sub
 
    Private Function GetButton(ByVal nInd As Integer) As Button
@@ -167,7 +168,7 @@ Public Class MainComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = DirectCast(e.Source, Button)
-      Dim CompoName As String = S_COMPO & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = If(m_MainWindow.FrameCutBtn.IsChecked, S_FRAMECOMPO, S_COMPO) & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       m_SecondaryComponentPage.m_sCurrCompo = String.Empty
       Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
@@ -251,13 +252,18 @@ Public Class MainComponentPageUC
    End Sub
 
    Private Sub LoadPage()
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         LoadFramePage()
+         Return
+      End If
+
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
       Dim nCompoNumber As Integer = GetPrivateProfileInt(S_COMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)
-      nDeltaSecondPage = 0
+         nDeltaSecondPage = 0
       Else
          ClearButton(nCompoNumber)
          nDeltaSecondPage = 8
@@ -325,16 +331,86 @@ Public Class MainComponentPageUC
 
    End Sub
 
+   Private Sub LoadFramePage()
+      Dim nDeltaSecondPage As Integer = 8
+      ' Leggo numero di componenti presenti
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
+      ' Calcolo indici a seconda della pagina in cui sono
+      If m_bIsFirstPage Then
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 0
+      Else
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 8
+      End If
+
+      ' Creazione converter da String a ImageSource
+      Dim ImageConverter As New ImageSourceConverter
+      Dim ThicknessConverter As New ThicknessConverter
+
+      'Assegnazione immagine e testo ai Button
+      For index As Integer = 1 To 8
+         Dim CustomThickness As New Thickness(0)
+         Dim nCompoName As Integer = GetPrivateProfileInt(S_FRAMECOMPO & index + nDeltaSecondPage, "Name", 0, m_MainWindow.GetIniFile())
+         Dim sCompoImage As String = ""
+         Dim sCompoImageSource As ImageSource
+
+         'verifico presenza immagine e la aggiungo
+         If GetPrivateProfileString(S_FRAMECOMPO & index + nDeltaSecondPage, "Image", "", sCompoImage, m_MainWindow.GetIniFile()) <> 0 Then
+            Try
+               sCompoImageSource = ImageConverter.ConvertFromString(m_MainWindow.GetResourcesDir() & "\" & sCompoImage)
+               GetImage(index).Height = 65
+               GetImage(index).Width = 65
+               GetImage(index).Source = sCompoImageSource
+            Catch ex As Exception
+               EgtOutLog("Error loading image " & sCompoImage)
+               sCompoImage = String.Empty
+               GetImage(index).Height = 0
+               GetImage(index).Width = 0
+               CustomThickness.Right = 0
+               GetImage(index).Margin = CustomThickness
+            End Try
+         Else
+            'Se non c'è l'immagine azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+         'verifico presenza testo
+         If nCompoName > 0 Then
+            Dim sCompoName As String = EgtMsg(MSG_COMPONENTPAGEUC + nCompoName)
+            'verifico presenza immagine
+            If sCompoImage.Length > 0 Then
+               'se la lunghezza del testo è maggiore di 15 lo taglio
+               If sCompoName.Length > 15 Then
+                  sCompoName = sCompoName.Substring(0, 15)
+               End If
+               GetLabel(index).Text = sCompoName
+               'Se ci sono sia testo che immagine imposto un margine di 10
+               CustomThickness.Right = 10
+               GetImage(index).Margin = CustomThickness
+            Else
+               'se l'immagine non c'è e il testo è maggiore di 20 lo taglio
+               If sCompoName.Length > 20 Then
+                  sCompoName = sCompoName.Substring(0, 20)
+               End If
+               GetLabel(index).Text = sCompoName
+            End If
+         Else
+            'Se non c'è testo azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+      Next
+
+   End Sub
+
    ' Gestione bottone altri componenti
    Private Sub Compo9_Click(sender As Object, e As RoutedEventArgs) Handles Compo9.Click
       If m_bIsFirstPage Then
          m_bIsFirstPage = False
          LoadPage()
-         'Compo9.SetValue(Grid.ColumnProperty, 1)
-         'Compo9.SetValue(Grid.ColumnSpanProperty, 1)
-         'ImageCompo9.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NumericKeyboardArrow.png", UriKind.Relative))
-         'ImageCompo9.Visibility = Windows.Visibility.Visible
-         'LabelCompo9.Visibility = Windows.Visibility.Hidden
          Compo9.SetValue(Grid.ColumnProperty, 0)
          Compo9.SetValue(Grid.ColumnSpanProperty, 2)
          ImageCompo9.Visibility = Windows.Visibility.Hidden

DrawImport/SideAngleUc.xaml

@@ -5,7 +5,7 @@
    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
    mc:Ignorable="d" 
-   d:DesignHeight="597.1" d:DesignWidth="255.9">
+   d:DesignHeight="636.9" d:DesignWidth="255.9">
 
    <!-- Definizione della Grid Laterale -->
    <Grid Name="VariablesCompoGrid"  Grid.RowSpan="2">
@@ -28,7 +28,7 @@
          <RowDefinition Height="1*"/>
          <RowDefinition Height="1*"/>
          <RowDefinition Height="0.2*"/>
-         <RowDefinition Height="4*"/>
+         <RowDefinition Height="5*"/>
          <!--<RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>-->
@@ -56,7 +56,7 @@
       <TextBlock Name="Entity1" Grid.Row="1" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A1" Grid.Column="1" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A1TxBx" Grid.Column="2" Grid.Row="1" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A1TxBx" Grid.Column="2" Grid.Row="1" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H1TxBx" Grid.Column="3" Grid.Row="1" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -64,7 +64,7 @@
       <TextBlock Name="Entity2" Grid.Row="2" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A2" Grid.Column="1" Grid.Row="2" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A2TxBx" Grid.Column="2" Grid.Row="2" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A2TxBx" Grid.Column="2" Grid.Row="2" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H2TxBx" Grid.Column="3" Grid.Row="2" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -72,7 +72,7 @@
       <TextBlock Name="Entity3" Grid.Row="3" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A3" Grid.Column="1" Grid.Row="3" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A3TxBx" Grid.Column="2" Grid.Row="3" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A3TxBx" Grid.Column="2" Grid.Row="3" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H3TxBx" Grid.Column="3" Grid.Row="3" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -80,7 +80,7 @@
       <TextBlock Name="Entity4" Grid.Row="4" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A4" Grid.Column="1" Grid.Row="4" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A4TxBx" Grid.Column="2" Grid.Row="4" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A4TxBx" Grid.Column="2" Grid.Row="4" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H4TxBx" Grid.Column="3" Grid.Row="4" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -88,7 +88,7 @@
       <TextBlock Name="Entity5" Grid.Row="5" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A5" Grid.Column="1" Grid.Row="5" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A5TxBx" Grid.Column="2" Grid.Row="5" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A5TxBx" Grid.Column="2" Grid.Row="5" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H5TxBx" Grid.Column="3" Grid.Row="5" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -96,7 +96,7 @@
       <TextBlock Name="Entity6" Grid.Row="6" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A6" Grid.Column="1" Grid.Row="6" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A6TxBx" Grid.Column="2" Grid.Row="6" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A6TxBx" Grid.Column="2" Grid.Row="6" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H6TxBx" Grid.Column="3" Grid.Row="6" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -104,7 +104,7 @@
       <TextBlock Name="Entity7" Grid.Row="7" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A7" Grid.Column="1" Grid.Row="7" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A7TxBx" Grid.Column="2" Grid.Row="7" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A7TxBx" Grid.Column="2" Grid.Row="7" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H7TxBx" Grid.Column="3" Grid.Row="7" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -112,7 +112,7 @@
       <TextBlock Name="Entity8" Grid.Row="8" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A8" Grid.Column="1" Grid.Row="8" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A8TxBx" Grid.Column="2" Grid.Row="8" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A8TxBx" Grid.Column="2" Grid.Row="8" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H8TxBx" Grid.Column="3" Grid.Row="8" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -120,7 +120,7 @@
       <TextBlock Name="Entity9" Grid.Row="9" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A9" Grid.Column="1" Grid.Row="9" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A9TxBx" Grid.Column="2" Grid.Row="9" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A9TxBx" Grid.Column="2" Grid.Row="9" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H9TxBx" Grid.Column="3" Grid.Row="9" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -128,14 +128,14 @@
       <TextBlock Name="Entity10" Grid.Row="10" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A10" Grid.Column="1" Grid.Row="10" Height="30" Width="40" HorizontalAlignment="Right"
           Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A10TxBx" Grid.Column="2" Grid.Row="10" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A10TxBx" Grid.Column="2" Grid.Row="10" Width="60" IsLength="False"
                             Margin="0,0,0,-2"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H10TxBx" Grid.Column="3" Grid.Row="10" Width="60"
                             Margin="0,0,0,-2"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-      <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4">
+      <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4" >
           <Grid.ColumnDefinitions>
                 <ColumnDefinition Width="1.5*"/>
                 <ColumnDefinition Width="0.3*"/>
@@ -143,10 +143,11 @@
                 <ColumnDefinition Width="0.6*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
             </Grid.RowDefinitions>
 
             <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
@@ -168,7 +169,7 @@
             <UniformGrid Rows="1" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Width="90" >
                 <EgtWPFLib:EgtTextBox Name="Parameter2aTxBx" 
                                       Grid.Column="2" Grid.Row="12"
-                                      Width="40" Height="30"
+                                      Width="40" Height="30" IsLength="False"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                 <EgtWPFLib:EgtTextBox Name="Parameter2bTxBx" 
                                       Grid.Column="3" Grid.Row="12" 
@@ -196,6 +197,16 @@
                                   Margin="0,0,0,-2"
                                   Width="85" Height="30"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            <TextBlock Name="Parameter5TxBl" Grid.Row="4" Grid.ColumnSpan="2"
+               Text="Angolo"
+               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
+                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="4" 
+                                  Margin="0,0,0,-2"
+                                  Width="85" Height="30" IsLength="False"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
         </Grid>
 
         <!--<TextBlock Name="Parameter1TxBl" Grid.Row="11" Text="Offset"

DrawImport/SideAngleUc.xaml.vb

@@ -34,7 +34,9 @@ Public Class SideAngleUC
    Friend m_dDripOffset2 As Double = 0
    Friend m_nEngrNbr2 As Integer = 1
    Friend m_dDripDepth As Double = 10
+   Friend m_dEngraveDepth2 As Double = 15
    Friend m_dDripShort As Double = 0
+   Friend m_dEngraveAngle As Double = 0
 
    Private CurrEntityDrip As DripEntity
 
@@ -105,6 +107,9 @@ Public Class SideAngleUC
          ' Accorciamento
          Parameter4TxBl.Visibility = Windows.Visibility.Hidden
          Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         ' Angolo 
+         Parameter5TxBl.Visibility = Windows.Visibility.Hidden
+         Parameter5TxBx.Visibility = Windows.Visibility.Hidden
       Else
          ' se aggiungo gli ENGRAVE e i DRIP
 
@@ -116,10 +121,12 @@ Public Class SideAngleUC
             GetAngleTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
             GetHeelTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
          Next
+
          ' Offset
          Parameter1TxBl.Visibility = Windows.Visibility.Visible
          Parameter1TxBx.Visibility = Windows.Visibility.Visible
          Parameter2TxBl.Visibility = Windows.Visibility.Visible
+
          ' Offset2
          If m_Mode <> ModeOpt.ENGRAVE Then
             Parameter2TxBx.Visibility = Windows.Visibility.Visible
@@ -130,12 +137,33 @@ Public Class SideAngleUC
             Parameter2aTxBx.Visibility = Windows.Visibility.Visible
             Parameter2bTxBx.Visibility = Windows.Visibility.Visible
          End If
+
          ' Affondamento
          Parameter3TxBl.Visibility = Windows.Visibility.Visible
          Parameter3TxBx.Visibility = Windows.Visibility.Visible
+
          ' Accorciamento
-         Parameter4TxBl.Visibility = Windows.Visibility.Hidden
-         Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         If m_Mode = ModeOpt.ENGRAVE Then
+            ' modifico il nome del messaggio 
+            Parameter4TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11) & "2"     ' Affondamento2
+            Parameter4TxBl.Visibility = Windows.Visibility.Visible
+            Parameter4TxBx.Visibility = Windows.Visibility.Visible
+         Else
+            Parameter4TxBl.Visibility = Windows.Visibility.Hidden
+            Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         End If
+
+         ' Angolo
+         If m_Mode = ModeOpt.ENGRAVE Then
+            ' modifico il nome del messaggio 
+            Parameter5TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 9)            ' Angolo
+            Parameter5TxBl.Visibility = Windows.Visibility.Visible
+            Parameter5TxBx.Visibility = Windows.Visibility.Visible
+         Else
+            Parameter5TxBl.Visibility = Windows.Visibility.Hidden
+            Parameter5TxBx.Visibility = Windows.Visibility.Hidden
+         End If
+
       End If
 
       ' Gestisco Checkbox e nomi in base al numero di lati inclinabili
@@ -156,12 +184,14 @@ Public Class SideAngleUC
          m_nEngrNbr2 = GetPrivateProfileInt( S_SIDES, K_ENGRAVENUMBER2, 1, m_MainWindow.GetIniFile())
          m_dDripOffset2 = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEOFFSET2, 0, m_MainWindow.GetIniFile())
          m_dDripDepth = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEDEPTH, 10, m_MainWindow.GetIniFile())
-         m_dDripShort = GetPrivateProfileDouble( S_SIDES, K_ENGRAVESHORT, 0, m_MainWindow.GetIniFile())
-         Parameter1TxBx.Text = LenToString( m_dDripOffset, 3)
+         m_dEngraveDepth2 = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0, m_MainWindow.GetIniFile())
+         m_dEngraveAngle = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEANGLE, 0, m_MainWindow.GetIniFile())
+         Parameter1TxBx.Text = LenToString(m_dDripOffset, 3)
          Parameter2aTxBx.Text = m_nEngrNbr2.ToString()
          Parameter2bTxBx.Text = LenToString( m_dDripOffset2, 3)
          Parameter3TxBx.Text = LenToString( m_dDripDepth, 3)
-         Parameter4TxBx.Text = LenToString( m_dDripShort, 3)
+         Parameter4TxBx.Text = LenToString(m_dEngraveDepth2, 3)
+         Parameter5TxBx.Text = DoubleToString(m_dEngraveAngle, 3)
       End If
 
       ' Aggiorno visualizzazione
@@ -489,7 +519,9 @@ Public Class SideAngleUC
          WritePrivateProfileString( S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString(), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, LenToString(m_dDripOffset2, 3), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3), m_MainWindow.GetIniFile())
          'WritePrivateProfileString( S_SIDES, K_ENGRAVESHORT, DoubleToString( m_dDripShort, 3), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVEANGLE, LenToString(m_dEngraveAngle, 3), m_MainWindow.GetIniFile())
       End If
 
       EgtDraw()
@@ -635,7 +667,7 @@ Public Class SideAngleUC
       SideAngle.AddTextToLine(sEntityName, TextLayer, CurrLine, 20, dBBoxRad, True)
    End Sub
 
-   ' Funzione che crea le geometrie dei gocciolatoi
+   ' Funzione che crea le geometrie dei gocciolatoi (NON UTILIZZATA)
    Friend Sub CreateDripGeomOLD(nPartId As Integer)
       ' Recupero Id layer di contorno esterno
       Dim nOutLoopId = EgtGetFirstNameInGroup(nPartId, NAME_OUTLOOP)
@@ -830,6 +862,9 @@ Public Class SideAngleUC
       Dim nCrvId = EgtGetFirstInGroup(DripLayer)
       While nCrvId <> GDB_ID.NULL
          EgtOffsetCurve(nCrvId, -m_dDripOffset, OFF_TYPE.EXTEND)
+         If m_Mode = ModeOpt.ENGRAVE Then
+            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+         End If
          nCrvId = EgtGetNext(nCrvId)
       End While
       ' Eventuali curve aggiuntive con offset2
@@ -840,10 +875,16 @@ Public Class SideAngleUC
             For i As Integer = 1 To m_nEngrNbr2
                Dim nNewId As Integer = EgtCopy(nCrvId, nCrvId, GDB_POS.AFTER)
                EgtOffsetCurve(nNewId, -i * m_dDripOffset2, OFF_TYPE.EXTEND)
+               If m_Mode = ModeOpt.ENGRAVE Then
+                  EgtSetInfo(nNewId, INFO_DEPTH, m_dEngraveDepth2)
+               End If
             Next
             nCrvId = nNextCrvId
          End While
       End If
+
+      Dim ListEngraveSideAng As New List(Of Integer)
+
       If m_Mode = ModeOpt.DRIP Then
          ' Esplodo nelle curve componenti
          nCrvId = EgtGetFirstInGroup(DripLayer)
@@ -863,14 +904,70 @@ Public Class SideAngleUC
          End While
       Else
          ' Assegno colore e attributi
+         Dim nInd As Integer = 0
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
             EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
-            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+            'EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
             EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
+            If nInd = 0 Then
+               ' solo se m_dEngraveAngle > 0
+               If Math.Abs(m_dEngraveAngle) > EPS_ANG_SMALL Then
+                  ' salvo l'Id della curva che deve essere manipolato separatamente
+                  ListEngraveSideAng.Add(nCrvId)
+               Else
+                  EgtRemoveInfo(nCrvId, INFO_SIDE_ANGLE)
+                  EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+               End If
+            Else
+               If nInd = m_nEngrNbr2 Then
+                  nInd = -1
+               End If
+               EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+            End If
+            nInd = nInd + 1
+            If nInd > m_nEngrNbr2 Then nInd = 0
             nCrvId = EgtGetNext(nCrvId)
          End While
       End If
+      SplitJointedSideEngrave(ListEngraveSideAng)
+   End Sub
+
+   Private Sub SplitJointedSideEngrave(ListEngraveSideAngId As List(Of Integer))
+      For Each nCrvId As Integer In ListEngraveSideAngId
+         ' eventualmente separo il taglio inclinato
+         Dim dUs, dUe As Double
+         EgtCurveDomain(nCrvId, dUs, dUe)
+         Dim dU As Double = dUs
+         While dU < dUe ' + EPS_ZERO
+            Dim ptCurr As Point3d
+            EgtAtParamPoint(nCrvId, dU + 1, nCrvId, ptCurr)
+            ' separa la curva in questo punto
+            Dim nNewCurvId As Integer = GDB_ID.NULL
+            If dUe > 1 Then
+               nNewCurvId = EgtSplitCurveAtPoint(nCrvId, ptCurr, GDB_RT.LOC)
+            Else
+               nNewCurvId = nCrvId
+            End If
+            EgtSetColor(nCrvId, COL_MCH_ONENGRAVE_ANG())
+            EgtSetInfo(nCrvId, INFO_SIDE_ANGLE, m_dEngraveAngle)
+            ' recupero il vettore di estrusione della curva e la direzione della curva
+            Dim vtAux As Vector3d
+            EgtStartVector(nCrvId, vtAux)
+            Dim vtExtrusion As Vector3d
+            EgtCurveExtrusion(nCrvId, vtExtrusion)
+            ' ruoto il vetottore nella nuova direzione
+            vtExtrusion.Rotate(vtAux, -m_dEngraveAngle)
+            ' assegno il vettore di estrusione nella nuova direzione indicata (segno negativo perchè dentro il pezzo)
+            EgtModifyCurveExtrusion(nCrvId, vtExtrusion)
+            Dim ExtendFactor As Double = New Vector3d(0, 0, 1) * vtExtrusion
+            EgtModifyCurveThickness(nCrvId, -m_dDripDepth / ExtendFactor)
+            If dUe = 1 Then Exit While
+            nCrvId = nNewCurvId
+            ' aggiorno i valori del dominio della curva che rimane
+            EgtCurveDomain(nCrvId, dUs, dUe)
+         End While
+      Next
    End Sub
 
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
@@ -1304,11 +1401,25 @@ Public Class SideAngleUC
    End Sub
 
    Private Sub Parameter4TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter4TxBx.EgtClosed
-      If m_Mode = ModeOpt.DRIP Or m_Mode = ModeOpt.ENGRAVE Then
+      If m_Mode = ModeOpt.DRIP Then
          ' Recupero il valore
          StringToLen(Parameter4TxBx.Text, m_dDripShort)
          ' Creo le geometrie dei gocciolatoi
          RefreshSideAngleText()
+      ElseIf m_Mode = ModeOpt.ENGRAVE Then
+         ' Recupero il valore
+         StringToLen(Parameter4TxBx.Text, m_dEngraveDepth2)
+         ' Creo le geometrie dei gocciolatoi
+         RefreshSideAngleText()
+      End If
+   End Sub
+
+   Private Sub Parameter5TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter5TxBx.EgtClosed
+      If m_Mode = ModeOpt.ENGRAVE Then
+         ' Recupero il valore
+         StringToDouble(Parameter5TxBx.Text, m_dEngraveAngle)
+         ' Creo le geometrie dei gocciolatoi
+         RefreshSideAngleText()
       End If
    End Sub
 

EgtDictionary.xaml

@@ -1,16 +1,48 @@
-<ResourceDictionary
-   x:Class="EgtDictionary"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:Project="clr-namespace:OmagCUT"
-   xmlns:ControlExtensions="clr-namespace:OmagCUT.ControlExtensions">
+<ResourceDictionary x:Class="EgtDictionary"
+                    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+                    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+                    xmlns:Project="clr-namespace:OmagCUT"
+                    xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+                    xmlns:EgtPHOTOLib="clr-namespace:EgtPHOTOLib;assembly=EgtPHOTOLib"
+                    xmlns:EgtFloating="clr-namespace:EgtWPFLib5.EgtFloating;assembly=EgtWPFLib5"
+                    xmlns:ControlExtensions="clr-namespace:OmagCUT.ControlExtensions">
 
-   <!--Template che permette di andare a capo-->
+    <EgtWPFLib5:StatusBarVM x:Key="StatusBarVM"/>
+    <EgtWPFLib5:ShowPanelVM x:Key="ShowPanelVM"/>
+    <EgtWPFLib5:ViewPanelVM x:Key="ViewPanelVM"/>
+    <EgtWPFLib5:InstrumentPanelVM x:Key="InstrumentPanelVM"/>
+
+    <EgtPHOTOLib:ProjectSlabVM x:Key="ProjectSlabVM"/>
+    <EgtPHOTOLib:OptionPanelSlabVM x:Key="OptionPanelSlabVM"/>
+    <EgtPHOTOLib:ListPageSlabVM x:Key="ListPageSlabVM"/>
+    <EgtPHOTOLib:DetailPageSlabVM x:Key="DetailPageSlabVM"/>
+    <EgtPHOTOLib:SearchPanelSlabVM x:Key="SearchPanelSlabVM"/>
+    <EgtPHOTOLib:MyInstrumentPanelSlabVM x:Key="MyInstrumentPanelSlabVM"/>
+
+    <!--Colori predefiniti-->
+    <SolidColorBrush x:Key="Omag_Blue" Color="#FF095CA8" />
+    <SolidColorBrush x:Key="Omag_Yellow" Color="#FFFFCE5B" />
+    <SolidColorBrush x:Key="Omag_Red" Color="Red" />
+    <SolidColorBrush x:Key="Omag_Green" Color="LawnGreen" />
+    <SolidColorBrush x:Key="Omag_VeryLightGray" Color="#FFF2F2F2" />
+    <SolidColorBrush x:Key="Omag_LightGray" Color="LightGray" />
+    <SolidColorBrush x:Key="Omag_Gray" Color="#FF9E9E9E" />
+    <SolidColorBrush x:Key="Omag_DarkGray" Color="#FF444444" />
+    <SolidColorBrush x:Key="Omag_White" Color="#FFFFFFFF" />
+    <SolidColorBrush x:Key="Omag_Black" Color="#FF000000" />
+
+    <SolidColorBrush x:Key="EgaltechBlue1" Color="#FF095CA8" />
+    <SolidColorBrush x:Key="EgaltechWhite" Color="#FFFFFFFF" />
+
+    <!--Template che permette di andare a capo-->
    <DataTemplate x:Key="Button_DataTemplate_Wrap">
       <TextBlock TextWrapping="Wrap" Text="{Binding}"/>
    </DataTemplate>
 
-   <!--ButtonBase-->
+    <!-- ______________________________________________________________________________________________________________________________________________ -->
+
+    <!-- Button Style -->
+
    <Style TargetType="{x:Type Button}">
       <Setter Property="FocusVisualStyle">
          <Setter.Value>
@@ -71,7 +103,44 @@
       </Setter>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <!--Template che permette di andare a capo-->
+    <DataTemplate x:Key="WrapButton_DataTemplate">
+        <TextBlock TextWrapping="WrapWithOverflow" Text="{Binding}"/>
+    </DataTemplate>
+
+    <Style x:Key="ToolBar_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="30"/>
+    </Style>
+    <Style x:Key="ToolBar_TextButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="80"/>
+    </Style>
+    <Style x:Key="OptionPanel_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="60"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+    <Style x:Key="OptionPanel_TextButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+    </Style>
+    <Style x:Key="OptionPanel_TextWrapButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="ContentTemplate" Value="{StaticResource WrapButton_DataTemplate}" />
+        <Setter Property="TextBlock.TextAlignment" Value="Center"/>
+        <Setter Property="Height" Value="45"/>
+    </Style>
+    <Style x:Key="OptionPanel_NestingButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="60"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+    <Style x:Key="CompoWindow_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="40"/>
+    </Style>
+    <Style x:Key="EgtWPFLib5_InputButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!--Template che permette di andare a capo-->
    <DataTemplate x:Key="CheckBox_DataTemplate_Wrap">
@@ -375,7 +444,59 @@
       </Setter>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <Style x:Key="ToolBar_ToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="30"/>
+    </Style>
+
+    <Style x:Key="ToolBar_TextToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="70"/>
+    </Style>
+
+    <Style x:Key="OptionPanel_ToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="30"/>
+    </Style>
+
+    <Style x:Key="OptionPanel_NestingToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="60"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+
+    <Style x:Key="CompoWindow_ToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="40"/>
+    </Style>
+
+    <Style x:Key="CompoWindow_WrapToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="ContentTemplate" Value="{StaticResource WrapButton_DataTemplate}" />
+        <Setter Property="TextBlock.TextAlignment" Value="Center" />
+        <Setter Property="Height" Value="40"/>
+    </Style>
+
+    <Style x:Key="Option_ColorButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Padding" Value="5"/>
+        <Setter Property="HorizontalContentAlignment" Value="Center"/>
+        <Setter Property="VerticalContentAlignment" Value="Center"/>
+        <Setter Property="TextBlock.TextAlignment" Value="Center"/>
+        <Style.Triggers>
+            <Trigger Property="IsMouseOver" Value="True">
+                <Setter Property="Background" Value="#FFB8C3CD"/>
+            </Trigger>
+            <Trigger Property="IsPressed" Value="True">
+                <Setter Property="OpacityMask" Value="#33FF0000"/>
+            </Trigger>
+            <Trigger Property="ToggleButton.IsChecked" Value="True">
+                <Setter Property="Background" Value="Transparent"/>
+            </Trigger>
+            <Trigger Property="IsEnabled" Value="False">
+                <Setter Property="Background" Value="#FFF4F4F4"/>
+                <Setter Property="BorderBrush" Value="#FFADB2B5"/>
+                <Setter Property="TextElement.Foreground"  Value="#FF838383"/>
+            </Trigger>
+        </Style.Triggers>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!--TreeViewBase-->
    <!--Style e colori della freccia di espansione, necessari per modificare il ContainerItemStyle perchè contiene riferimenti ad essi-->
@@ -431,6 +552,32 @@
       </Setter>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <!-- ______________________________________________________________________________________________________________________________________________ -->
+
+    <!-- EgtCustomWindow -->
+
+    <Style TargetType="{x:Type EgtWPFLib5:EgtCustomWindow}" BasedOn="{StaticResource {x:Type EgtWPFLib5:EgtCustomWindow}}">
+        <Setter Property="TitleBarHeight" Value="32"/>
+        <Setter Property="TitleBarBrush" Value="{StaticResource Omag_LightGray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource Omag_Gray}"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________________________________ -->
+
+    <!-- EgtFloatingPanel -->
+
+    <Style x:Key="ToolBar_EgtFloatingPanel" TargetType="{x:Type EgtFloating:EgtFloatingPanel}" BasedOn="{StaticResource {x:Type EgtFloating:EgtFloatingPanel}}">
+        <Setter Property="Background" Value="{StaticResource Omag_Gray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource Omag_Gray}"/>
+    </Style>
+
+    <Style x:Key="Option_EgtFloatingPanel" TargetType="{x:Type EgtFloating:EgtFloatingPanel}" BasedOn="{StaticResource {x:Type EgtFloating:EgtFloatingPanel}}">
+        <Setter Property="IsToolBar" Value="False"/>
+        <Setter Property="TitleBarOrientation" Value="Vertical"/>
+        <Setter Property="Background" Value="{StaticResource Omag_Gray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource Omag_Gray}"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
 </ResourceDictionary>

Frames/FrameCutPageUC.xaml

@@ -7,124 +7,146 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
 
-   <!-- Definizione della FrameCutPage -->
-   <Grid Name="FrameCutPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
-      
-      <!-- Definizione della Grid superiore -->
-      <Grid Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
-         </Grid.ColumnDefinitions>
-         
-         <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
-            <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </ToggleButton>
-
-      </Grid>
-
-      <Grid Name="LeftGrid" Grid.Row="1">
-         <Grid.RowDefinitions>
+    <!-- Definizione della FrameCutPage -->
+    <Grid Name="FrameCutPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
             <RowDefinition Height="1*"/>
-            <RowDefinition Height="7*"/>
-         </Grid.RowDefinitions>
-      
-      <Grid Grid.Row="1">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="0.6*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="2.5*"/>
-         </Grid.RowDefinitions>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
-               Width="200" MaxDropDownHeight="300">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+        <!-- Definizione della Grid superiore -->
+        <Grid Grid.Column="1" Grid.Row="0" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+            </Grid.ColumnDefinitions>
 
-         <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="SelSectionBtn" 
-                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+            <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="CompoBtn" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="SelSectionBtn" Grid.Column="3" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                 <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
-             
-            <Grid>
-               <Button Name="SelGuideBtn" 
-                       Style="{DynamicResource OmagCut_YellowTextButton}"/>
-               <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-                  <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
-                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-                  <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
-                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               </UniformGrid>
-            </Grid>  
-         </UniformGrid>
 
-         <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+            <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
+                <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
+        </Grid>
+
+        <Grid Name="LeftGrid" Grid.Row="1">
+            <Grid.RowDefinitions>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="7*"/>
+            </Grid.RowDefinitions>
+
+            <Grid Grid.Row="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.6*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="1.7*"/>
+                </Grid.RowDefinitions>
+
+                <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
+               Width="200" MaxDropDownHeight="300">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                    <!--<Button Name="SelSectionBtn" 
+                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                        <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>-->
+
+                    <Grid>
+                        <Button Name="SelGuideBtn" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                        <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                            <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                            <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                            <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                        </UniformGrid>
+                    </Grid>
+                </UniformGrid>
+
+                <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
-            Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
-            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
+               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
+               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="MirrorPartBtn" 
+                <TextBlock Name="OffsXInteryTxBl"  Grid.Row="5" Grid.ColumnSpan="2"
+               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsXInteryTxBx" Grid.Column="2" Grid.Row="5" Width="50"
+               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+                <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="MirrorPartBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource SpecchiaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-            </Button>
-            <Button Name="RemovePartBtn" 
+                    </Button>
+                    <Button Name="RemovePartBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource Rimuovi_eliminaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </UniformGrid>
+                    </Button>
+                </UniformGrid>
 
-         <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
+                <!--<UniformGrid Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="CompoBtn" 
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                        <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                </UniformGrid>-->
+
+                <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
             Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
 
          <ComboBox Name="SawRoughingCmBx" Grid.Row="5" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}"
@@ -182,10 +204,10 @@
             </ComboBox.ItemTemplate>
          </ComboBox>-->
 
-      </Grid>
-         
-      </Grid>
+            </Grid>
 
-   </Grid>
+        </Grid>
+
+    </Grid>
 
 </UserControl>

Frames/FrameCutPageUC.xaml.vb

@@ -52,6 +52,8 @@ Public Class FrameCutPageUC
       OffsXyTxBx.Text = LenToString(dOffsXY, 3)
       Dim dOffsYY As Double = GetPrivateProfileDouble(S_FRAME, K_OFFSYY, 5, m_MainWindow.GetIniFile())
       OffsYyTxBx.Text = LenToString(dOffsYY, 3)
+      Dim dOffsXInterY As Double = GetPrivateProfileDouble(S_FRAME, K_OFFSXINTERY, 5, m_MainWindow.GetIniFile())
+      OffsXInteryTxBx.Text = LenToString(dOffsXInterY, 3)
 
       ' Imposto i messaggi letti dal file dei messaggi
       m_AlongAx.Add(EgtMsg(MSG_FRAMECUTPAGEUC + 1))            'Lungo X
@@ -70,6 +72,7 @@ Public Class FrameCutPageUC
       OffsZTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 8)           'Distanza sopra
       OffsXyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 9)          'Distanza inizio
       OffsYyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 22)         'Distanza Y
+      OffsXInteryTxBl.Text = EgtMsg(90645)                      'Interasse
    End Sub
 
    Private Sub FrameCutPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -81,6 +84,12 @@ Public Class FrameCutPageUC
       m_ProjectMgr.CSVBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.VeinMatchingBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.RegisterBtn.Visibility = Windows.Visibility.Hidden
+      ' Visualizzo il bottone per l'importazione dei compo frame
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.COMPOFRAME) AndAlso GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile()) > 0 Then
+         CompoBtn.Visibility = Visibility.Visible
+      Else
+         CompoBtn.Visibility = Visibility.Hidden
+      End If
       ' Recupero dimensioni e kerf del grezzo
       m_nRawId = EgtGetFirstRawPart()
       GetRawBox(m_RawBox)
@@ -271,7 +280,7 @@ Public Class FrameCutPageUC
       End If
    End Sub
 
-   Private Sub OffsXXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsZTxBx.EgtClosed, OffsXyTxBx.EgtClosed, OffsYyTxBx.EgtClosed
+   Private Sub OffsXXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsZTxBx.EgtClosed, OffsXyTxBx.EgtClosed, OffsYyTxBx.EgtClosed, OffsXInteryTxBx.EgtClosed
       ' Forzo aggiornamento grezzo nella pagina di Nesting
       m_MainWindow.m_CadCutPageUC.m_NestPage.CalcRawPart()
       ' Parcheggio pezzi presenti nel grezzo
@@ -296,9 +305,13 @@ Public Class FrameCutPageUC
          WritePrivateProfileString(S_FRAME, K_OFFSXY, DoubleToString(dOffsXy, 3), m_MainWindow.GetIniFile())
       End If
       Dim dOffsYy As Double = 0
-      If StringToLen(OffsYyTxBx.Text, dOffsYY) Then
+      If StringToLen(OffsYyTxBx.Text, dOffsYy) Then
          WritePrivateProfileString(S_FRAME, K_OFFSYY, DoubleToString(dOffsYy, 3), m_MainWindow.GetIniFile())
       End If
+      Dim dOffsXIntery As Double = 0
+      If StringToLen(OffsXInteryTxBx.Text, dOffsXIntery) Then
+         WritePrivateProfileString(S_FRAME, K_OFFSXINTERY, DoubleToString(dOffsXIntery, 3), m_MainWindow.GetIniFile())
+      End If
    End Sub
 
    Private Sub MirrorPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles MirrorPartBtn.Click
@@ -436,6 +449,16 @@ Public Class FrameCutPageUC
       End If
    End Sub
 
+   Private Sub CompoBtn_Click(sender As Object, e As RoutedEventArgs) Handles CompoBtn.Click
+      m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
+      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
+      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
+   End Sub
+
    Friend Function CreateFrame(nPartId As Integer) As Boolean
       If Not MyCreateFrame( nPartId) Then
          EgtErase( nPartId)
@@ -936,12 +959,18 @@ Public Class FrameCutPageUC
       ' Determino distanza da spessore lama
       Dim dMinDist As Double = 0
       Dim dSawThick As Double = 0
+      Dim dOffsXIntery As Double = 0
+      StringToLen(OffsXInteryTxBx.Text, dOffsXIntery)
       If EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw) AndAlso
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dSawThick) Then
-         dMinDist = dSawThick + 5 * EPS_SMALL
+         If dOffsXIntery <= dSawThick Then
+            dMinDist = dSawThick + 5 * EPS_SMALL
+         Else
+            dMinDist = dOffsXIntery + 5 * EPS_SMALL
+         End If
       Else
          EgtOutLog("Not found current saw for frames mindist")
-         dMinDist = 0
+         dMinDist = dOffsXIntery
       End If
       ' Inserisco il pezzo nel grezzo
       Dim ptIns As Point3d

Machine/AlarmsPageUC.xaml.vb

@@ -29,7 +29,7 @@ Public Class AlarmsPageUC
 
    Private Sub AlarmsPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
 
-      'Assegno liste a combobox
+      ' Assegno liste a combobox
       CurrSawCmBx.ItemsSource = m_SawList
       CurrDrillCmBx.ItemsSource = m_DrillList
       CurrMillCmBx.ItemsSource = m_MillList
@@ -37,14 +37,24 @@ Public Class AlarmsPageUC
       CurrWJetCmBx.ItemsSource = m_WaterJetList
       AuxiliaryToolCmBx.ItemsSource = m_AuxToolTypeList
 
+      ' Variabile che accorcia il riferimento alla macchina corrente
+      m_CurrentMachine = m_MainWindow.m_CurrentMachine
+
       ' Assegno lista ad elenco materiali
-      MaterialsLstBx.ItemsSource = m_MainWindow.m_CurrentMachine.Materials
+      MaterialsLstBx.ItemsSource = m_CurrentMachine.Materials
 
       ' Se non è impostato il controllo numerico, nascondo il bottone di tastatura lama
       If GetPrivateProfileInt(S_NUMERICALCONTROL, K_TYPE, 0, m_MainWindow.GetMachIniFile()) = 0 Then
          SawProbingBtn.Visibility = Windows.Visibility.Hidden
       End If
 
+      ' Se esiste un file lua valido allora mostro il pulsante per l'esecuzione dello script
+      If Not String.IsNullOrEmpty(GetExecLuaFile()) And
+         ExecLuaBtn.Visibility = Visibility.Visible Then
+      Else
+         ExecLuaBtn.Visibility = Visibility.Hidden
+      End If
+
       ' Imposto i messaggi letti dal file dei messaggi
       CurrSawTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 1)
       AuxiliaryToolTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 2)
@@ -81,7 +91,16 @@ Public Class AlarmsPageUC
       TmDepthTxBl.Text = EgtMsg( 91063)                                  ' Profondità
       TmWidthTxBl.Text = EgtMsg( 91064)                                  ' Larghezza
       WJsParamGpBx.Header = EgtMsg( 91058)                               ' Parametri waterjet
-      WjIntCutsTxBl.Text = EgtMsg( 90930)                                ' Sempre sugli interni
+      WjIntCutsTxBl.Text = EgtMsg(90930)                                 ' Sempre sugli interni
+      '-- INIZIO -- nuovi parametri per preforo lavello
+      HolesDiameterWJTxBl.Text = "Diameter"
+      HolesOffsetWJTxBl.Text = "Offset"
+      MinRadiusWJTxBl.Text = "Min Radius"
+      OneHoleInCornerWJTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 26)
+      '-- INIZIO -- nuovi parametro Rettifica tagli sottosquadra WJ
+      REctificationWJParamGpBx.Header = "Rectification"
+      EnableRectificationTxBl.Text = "Enable (on subsquare angle)"
+      '--  FINE  -- nuovi parametro Rettifica tagli sottosquadra WJ
       NestingParamGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 31)            ' Nesting
       AlignTxBl.Text = EgtMsg(90932)                                     ' Allineato
       GhigliottinaTxBl.Text = EgtMsg(91066)                              ' Ghigliottina
@@ -116,8 +135,6 @@ Public Class AlarmsPageUC
    Private Sub AlarmsPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
 
       If m_bFirst Then
-         ' Variabile che accorcia il riferimento alla macchina corrente
-         m_CurrentMachine = m_MainWindow.m_CurrentMachine
 
          ' in assenza dell'uscita H1 nascondo i parametri lama
          If EgtGetHeadId("H1") = GDB_ID.NULL Then
@@ -161,6 +178,7 @@ Public Class AlarmsPageUC
          ' Se non previsti tagli waterjet, disabilito relativo box
          If Not m_CurrentMachine.bWaterJetting Then
             WjsParamGpBx.Visibility = Visibility.Hidden
+            RectificationWJParamGpBx.Visibility = Visibility.Hidden
          End If
 
          ' Abilitazione box per contorni grezzo da foto
@@ -188,8 +206,8 @@ Public Class AlarmsPageUC
          m_bFirst = False
       End If
 
-         ' Aggiorno lista delle lame per pagina macchina in cui scegliere quella corrente
-         CreateToolList(MCH_TF.SAWBLADE, m_SawList)
+      ' Aggiorno lista delle lame per pagina macchina in cui scegliere quella corrente
+      CreateToolList(MCH_TF.SAWBLADE, m_SawList)
       ' Seleziono lama corrente
       CurrSawCmBx.SelectedItem = m_CurrentMachine.sCurrSaw
 
@@ -325,12 +343,24 @@ Public Class AlarmsPageUC
       EgtMdbSave()
       ' Leggo lavorazione angoli con fresa
       CornerCutsChBx.IsChecked =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
       ' Leggo lavorazione interni con fresa
       InternalCutsChBx.IsChecked =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
       WjIntCutsChBx.IsChecked =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
+      ' Lavorazione preforo lavello con WaterJet
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_HOLES_DIAMITERWJ, 0, m_MainWindow.GetMachIniFile())
+      HolesDiameterWJTxBx.Text = LenToString(dVal, 2)
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_HOLES_OFFSETWJ, 0, m_MainWindow.GetMachIniFile())
+      HolesOffsetWJTxBx.Text = LenToString(dVal, 2)
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MIN_RADIUSWJ, 0, m_MainWindow.GetMachIniFile())
+      MinRadiusWJTxBx.Text = LenToString(dVal, 2)
+      OneHoleInCornerWJChBx.IsChecked =
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
+      ' leggo se attiva la rettifica degli angoli per WaterJet
+      EnableRectificationChBx.IsChecked =
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, 0, m_MainWindow.GetMachIniFile()) <> 0)
       ' Leggo accorciamento angoli con fresa
       dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
       ShortTxBx.Text = LenToString(dVal, 2)
@@ -343,7 +373,7 @@ Public Class AlarmsPageUC
       dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_ENGRAVING_WIDTH, 0, m_MainWindow.GetMachIniFile())
       TmWidthTxBx.Text = LenToString(dVal, 2)
       ' Flag per movimento in home alla fine dei tagli diretti
-      FinalHomeChBx.IsChecked = m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome
+      FinalHomeChBx.IsChecked = m_CurrentMachine.bDirectCutsFinalHome
       ' Leggo tagli ridotti per interferenza in nesting
       CompleteCutsChBx.IsChecked =
              (GetPrivateProfileInt(S_MACH_NEST, K_MACH_REDUCEDCUT, 0, m_MainWindow.GetMachIniFile()) = 0)
@@ -365,7 +395,7 @@ Public Class AlarmsPageUC
          AdditionalTableTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 36) & " " & GetCurrentTable().ToString()
       End If
       ' Leggo altezza sovratavola
-      dVal = m_MainWindow.m_CurrentMachine.dAdditionalTable
+      dVal = m_CurrentMachine.dAdditionalTable
       AdditionalTableTxBx.Text = LenToString(dVal, 2)
       ' Leggo soglia e tolleranza per contorno grezzo da foto
       ThresholdTxBx.Text = m_MainWindow.m_Camera.Threshold.ToString()
@@ -383,7 +413,7 @@ Public Class AlarmsPageUC
       If nWashing = -1 Then
          WashingGpBx.Visibility = Visibility.Hidden
       Else
-         WashingChBx.IsChecked = ( nWashing <> 0)
+         WashingChBx.IsChecked = (nWashing <> 0)
       End If
       ' Leggo parametri per variazione feed in tagli
       CfrLenTxBx.Text = LenToString(m_CurrentMachine.dFsevLength, 3)
@@ -439,7 +469,7 @@ Public Class AlarmsPageUC
          CurrWaterJettingTxBx.Text = m_CurrentMachine.sCurrWaterJetting
          CurrWaterJettingTxBl.Visibility = Windows.Visibility.Visible
          CurrWaterJettingTxBx.Visibility = Windows.Visibility.Visible
-         If m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+         If m_CurrentMachine.bFromDBWaterJet Then
             CurrWaterJettingTxBx.SetValue(Grid.ColumnSpanProperty, 1)
             CurrWaterJettingTxBx.SetValue(MarginProperty, New Thickness(CurrWaterJettingTxBx.Margin.Left,
                                                                         CurrWaterJettingTxBx.Margin.Top,
@@ -578,6 +608,33 @@ Public Class AlarmsPageUC
          String.Compare(sMchTool, m_CurrentMachine.sCurrSaw, True) <> 0 Then
          m_CurrentMachine.sCurrSawing = String.Empty
       End If
+
+      'Dim sVal As String = String.Empty
+      'Dim dVal As Double = 0
+      'If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSawing, false) Then
+      '   StringToDouble(sVal, dVal)
+      '   m_CurrentMachine.SetFsevLength(dVal)
+      'End If
+      'If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSawing, false) Then
+      '   StringToDouble(sVal, dVal)
+      '   m_CurrentMachine.SetFsevPerc(dVal)
+      'End If
+
+      Dim sVal As String = String.Empty
+      Dim dVal As Double = 0
+      If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, dVal)
+         m_CurrentMachine.SetFsevLength(dVal)
+      End If
+      If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, dVal)
+         m_CurrentMachine.SetFsevPerc(dVal)
+      End If
+
+      ' Leggo parametri per variazione feed in tagli aggiornati in funzione della lama
+      CfrLenTxBx.Text = LenToString(m_CurrentMachine.dFsevLength, 3)
+      CfrPercTxBx.Text = DoubleToString(m_CurrentMachine.dFsevPerc, 0)
+
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
       ' aggiorno la lista delle lavorazioni
@@ -893,6 +950,44 @@ Public Class AlarmsPageUC
       End If
    End Sub
 
+   ' -- INIZIO -- nuovi parametri per prefori WaterJet
+   Private Sub HolesDiameterWJTxBx_Click(sender As Object, e As EventArgs) Handles HolesDiameterWJTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(HolesDiameterWJTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_HOLES_DIAMITERWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub HolesOffsetWJTxBx_Click(sender As Object, e As EventArgs) Handles HolesOffsetWJTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(HolesOffsetWJTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_HOLES_OFFSETWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub MinRadiusWJTxBx_Click(sender As Object, e As EventArgs) Handles MinRadiusWJTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(MinRadiusWJTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_MIN_RADIUSWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub OneHoleInCornerWJChBx_Click(sender As Object, e As EventArgs) Handles OneHoleInCornerWJChBx.Click
+      If OneHoleInCornerWJChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+   ' --   FINE   -- nuovi parametri per prefori WaterJet
+
+   ' -- INIZIO -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+   Private Sub EnableRectificationChBx_Click(sender As Object, e As EventArgs) Handles EnableRectificationChBx.Click
+      If EnableRectificationChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "1", m_MainWindow.GetMachIniFile)
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "0", m_MainWindow.GetMachIniFile)
+      End If
+   End Sub
+   ' --   FINE   -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+
    Private Sub TmEnableChBx_Click(sender As Object, e As RoutedEventArgs) Handles TmEnableChBx.Click
       If TmEnableChBx.IsChecked() Then
          WritePrivateProfileString(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, "1", m_MainWindow.GetMachIniFile())
@@ -915,9 +1010,9 @@ Public Class AlarmsPageUC
 
    Private Sub FinalHomeChBx_Click(sender As Object, e As RoutedEventArgs) Handles FinalHomeChBx.Click
       If FinalHomeChBx.IsChecked() Then
-         m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome = True
+         m_CurrentMachine.bDirectCutsFinalHome = True
       Else
-         m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome = False
+         m_CurrentMachine.bDirectCutsFinalHome = False
       End If
    End Sub
 
@@ -959,7 +1054,7 @@ Public Class AlarmsPageUC
    Private Sub AdditionalTableTxBx_EgtClosed(sender As Object, e As EventArgs) Handles AdditionalTableTxBx.EgtClosed
       Dim dVal As Double = 0
       StringToLen(AdditionalTableTxBx.Text, dVal)
-      m_MainWindow.m_CurrentMachine.dAdditionalTable = dVal
+      m_CurrentMachine.dAdditionalTable = dVal
    End Sub
 
    Private Sub NewMatBtn_Click(sender As Object, e As RoutedEventArgs) Handles NewMatBtn.Click
@@ -1083,9 +1178,13 @@ Public Class AlarmsPageUC
          Case 3
             Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(0)
             EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+         Case 4
+            ' FANUC - Manual:7, Edit:1
+            Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(7)
+            EgtOutLog("Impostata modalità manuale: esito " & nResult.ToString)
       End Select
       ' Recupero file LUA
-      EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\SawProbing.lua")
+      EgtLuaExecFile(m_CurrentMachine.sMachDir() & "\DirectCmd\SawProbing.lua")
       ' Recupero utensile da tastare
       Dim ToolForProbing As ToolPos = ChooseToolForProbing()
       If IsNothing(ToolForProbing) OrElse String.IsNullOrWhiteSpace(ToolForProbing.m_ToolName) Then Return
@@ -1105,6 +1204,12 @@ Public Class AlarmsPageUC
       EgtLuaSetGlobNumVar("CMD.THICK", dToolThick * 1000)
       EgtTdbGetCurrToolParam(MCH_TP.LEN, dToolLen)
       EgtLuaSetGlobNumVar("CMD.LENGTH", dToolLen * 1000)
+      ' Nuova varibile per gestione tastatura utensili Frankfurt (Polishing)
+      Dim nType As Integer
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      If m_CurrentMachine.bPolishingWheel AndAlso nType = MCH_TY.MILL_POLISHING Then
+         EgtLuaSetGlobStringVar("CMD.POLISHING", "1")
+      End If
       EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
       EgtLuaCallFunction("CMD.CmdString")
       ' Leggo variabili
@@ -1124,7 +1229,7 @@ Public Class AlarmsPageUC
       ' Modifico stringa per inserire i newline
       CmdString = CmdString.Replace("<br/>", Environment.NewLine)
       ' Creo file...
-      Dim FilePath As String = m_MainWindow.GetCncDir() & "\SawProbing" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+      Dim FilePath As String = m_MainWindow.GetCncDir() & "\SawProbing" & m_CurrentMachine.sIsoFileExt
       ' ...e ci scrivo
       Dim Writer As New IO.StreamWriter(FilePath, False)
       Writer.Write(CmdString)
@@ -1148,6 +1253,11 @@ Public Class AlarmsPageUC
          Return
       End If
       m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      ' Se fanuc passo in modalità AUTO e attivo
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(0)
+         EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+      End If
       ' Aspetto e lo avvio
       System.Threading.Thread.Sleep(300)
       m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
@@ -1197,6 +1307,10 @@ Public Class AlarmsPageUC
          Dim bRead As Boolean = False
          Dim SawDiameterNameVar As String = String.Empty
          GetPrivateProfileString(S_MACH_PROBING, K_SAWDIAMETER, "", SawDiameterNameVar, m_MainWindow.GetMachIniFile())
+         ' Se utensile non lama, allora la variabile in cui leggo il dato potrebbe essere differente
+         If Not ToolForProbing.m_IsSaw Then
+            GetPrivateProfileString(S_MACH_PROBING, K_TOOLLENGTH, SawDiameterNameVar, SawDiameterNameVar, m_MainWindow.GetMachIniFile())
+         End If
          m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
          For I As Integer = 0 To 20
             ' Devo rileggere la variabile ad ogni ciclo
@@ -1205,7 +1319,10 @@ Public Class AlarmsPageUC
             If m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
                bRead = True
                Dim dVal As Double = m_MainWindow.m_CNCommunication.m_CN.d_DReadELS_value
-               dVal = dVal / 1000
+               ' Se fanuc il dato è in mm (NON MICRON)
+               If m_MainWindow.m_CNCommunication.m_nNCType <> 4 Then
+                  dVal = dVal / 1000
+               End If
                MsgBoxStateInfo.LoadingPrBr_Value = 100
                ' Tastatura conclusa con successo
                Dim sOut As String = EgtMsg(MSG_DIRECTCUTPAGEUC + 43) & " : " & DoubleToString(dVal, 1)
@@ -1252,9 +1369,9 @@ Public Class AlarmsPageUC
    End Sub
 
    Private Function ChooseToolForProbing() As ToolPos
-      Select Case m_MainWindow.m_CurrentMachine.MountedToolConfig
+      Select Case m_CurrentMachine.MountedToolConfig
          Case CurrentMachine.MountedToolConfigs.SAW
-            Return New ToolPos(m_MainWindow.m_CurrentMachine.sCurrSaw, "T100", True)
+            Return New ToolPos(m_CurrentMachine.sCurrSaw, "T100", True)
          Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL, CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER
             Dim ChooseTool As New ChooseToolWD(m_MainWindow)
             If ChooseTool.ShowDialog Then
@@ -1300,4 +1417,36 @@ Public Class AlarmsPageUC
 
    End Sub
 
+   Private Sub ExecLuaBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExecLuaBtn.Click
+      Dim sExecFile As String = GetExecLuaFile()
+      ' Eseguo file LUA e recupero risultato
+      Dim nErr As Integer = 999
+      EgtLuaExecFile(sExecFile)
+      EgtLuaGetGlobIntVar("ELS.ERR", nErr)
+      ' Reset lua
+      EgtLuaResetGlobVar("ELS")
+      ' Verifico condizioni di errore
+      If nErr Then
+         ' Errore...
+         EgtOutLog("Error executing file: " & sExecFile & ", ELS.ERR=" & nErr.ToString)
+         ' Error executing script
+         Dim MsgBoxError As New EgtMsgBox(m_MainWindow, "", EgtMsg(90259), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+         Return
+      End If
+   End Sub
+
+   ' Recupero il percorso del file lua da eseguire
+   Private Function GetExecLuaFile() As String
+      Dim sFile As String = String.Empty
+      If GetPrivateProfileString(S_EXECLUA, K_FILESCRIPT_LUA, "", sFile, m_MainWindow.GetMachIniFile()) <> 0 Then
+         ' Sistemo nome file
+         sFile = sFile.Trim()
+         If Not sFile.EndsWith(".lua") Then sFile = sFile & ".lua"
+         ' Creo path
+         Dim sPath As String = m_CurrentMachine.sMachDir() & "\Scripts\" & sFile
+         If File.Exists(sPath) Then Return sPath
+      End If
+      Return String.Empty
+   End Function
+
 End Class

Machine/CurrentMachine.vb

@@ -1,6 +1,7 @@
 Imports System.Collections.ObjectModel
 Imports EgtWPFLib5
 Imports EgtUILib
+Imports System.IO
 
 Public Class CurrentMachine
 
@@ -51,6 +52,8 @@ Public Class CurrentMachine
    Private m_sProdLiProbingState2Var As String = ""
    Private m_sProdLiProbingTcPos2Var As String = ""
    Private m_sProdLiSawDiameter2Var As String = ""
+   Private m_sClickState As String = "E80028"
+   Private m_sClickDir As String = ""
 
    ' Numero e tipo di utensili correntemente disponibili sulla macchina
    Private m_MountedToolConfig As MountedToolConfigs = MountedToolConfigs.SAW
@@ -77,6 +80,9 @@ Public Class CurrentMachine
    Private m_bPolishingWheel As Boolean = False
    Private m_bWaterJet As Boolean = False
 
+   ' Flag che indica se gesire l'inversione del taglio nei tagli singoli
+   Private m_bEnableInvetrt As Boolean = True
+
    ' Abilitazione DB WaterJet
    Private m_bFromDBWaterJet As Boolean = False
 
@@ -313,7 +319,7 @@ Public Class CurrentMachine
          Return m_bAskNewOnResend
       End Get
    End Property
-   
+
 
    Friend ReadOnly Property nProdLiSawProbe As Integer
       Get
@@ -321,6 +327,18 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property sClickState As String
+      Get
+         Return m_sClickState
+      End Get
+   End Property
+
+   Friend ReadOnly Property sClickDir As String
+      Get
+         Return m_sClickDir
+      End Get
+   End Property
+
    Friend Function sProdLiProbingStateVar(nI As Integer) As String
       If nI = 1 Then Return m_sProdLiProbingStateVar
       If nI = 2 Then Return m_sProdLiProbingState2Var
@@ -609,6 +627,18 @@ Public Class CurrentMachine
          If WritePrivateProfileString(S_MACH_MACH, K_CURRSAWING, value, sMachIniFile) Then
             m_sCurrSawing = value
             m_MainWindow.m_CurrentProjectPageUC.MachiningTxBx.Text = value
+            '' aggiorno il file ini della macchina con i valori correnti della lavorazione
+            'Dim sVal As String = String.Empty
+            'Dim dVal As Double = m_dFsevLength
+            'If GetUserNote("FsevLength", sVal, m_sCurrSawing, False) Then
+            '   StringToDouble(sVal, dVal)
+            '   SetFsevLength(dVal)
+            'End If
+            'dVal = m_dFsevPerc
+            'If GetUserNote("FsevPerc", sVal, m_sCurrSawing, False) Then
+            '   StringToDouble(sVal, m_dFsevPerc)
+            '   SetFsevPerc(dVal)
+            'End If
          End If
       End Set
    End Property
@@ -740,6 +770,12 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property bEnableInvert As Boolean
+      Get
+         Return m_bEnableInvetrt
+      End Get
+   End Property
+
    Friend Property dAdditionalTable As Double
       Get
          Select Case GetCurrentTable()
@@ -752,6 +788,7 @@ Public Class CurrentMachine
          End Select
       End Get
       Set(value As Double)
+         Dim dValue As Double = 0
          Select Case GetCurrentTable()
             Case 3
                If Math.Abs(value - m_dTab3AdditionalTable) > EPS_SMALL And
@@ -760,6 +797,11 @@ Public Class CurrentMachine
                   m_dTab3AdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, value)
+                  End If
                End If
             Case 2
                If Math.Abs(value - m_dTab2AdditionalTable) > EPS_SMALL And
@@ -768,6 +810,11 @@ Public Class CurrentMachine
                   m_dTab2AdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, value)
+                  End If
                End If
             Case Else
                If Math.Abs(value - m_dAdditionalTable) > EPS_SMALL And
@@ -776,6 +823,11 @@ Public Class CurrentMachine
                   m_dAdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, value)
+                  End If
                End If
          End Select
       End Set
@@ -845,9 +897,18 @@ Public Class CurrentMachine
       Set(value As Double)
          If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVLEN, DoubleToString(value, 3), sMachIniFile) Then
             m_dFsevLength = value
+            ' salvo il dato nelle UserNote della lavorazione
+            'MdbSetCurrMachiningUserNote("FsevLength", m_dFsevLength.ToString, sCurrSawing, false)
+            ' salvo il dato nelle UserNote dell'utensile
+            TdbSetCurrToolUserNote("FsevLength", m_dFsevLength.ToString, sCurrSaw)
          End If
       End Set
    End Property
+   Friend Sub SetFsevLength(value As Double)
+      If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVLEN, DoubleToString(value, 3), sMachIniFile) Then
+         m_dFsevLength = value
+      End If
+   End Sub
 
    Friend Property dFsevPerc As Double
       Get
@@ -856,9 +917,18 @@ Public Class CurrentMachine
       Set(value As Double)
          If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVPERC, DoubleToString(value, 3), sMachIniFile) Then
             m_dFsevPerc = value
+            '' salvo il dato nelle UserNote della lavorazione
+            'MdbSetCurrMachiningUserNote("FsevPerc", m_dFsevPerc.ToString, sCurrSawing)
+            ' salvo il dato nelle UserNote dell'utensile
+            TdbSetCurrToolUserNote("FsevPerc", m_dFsevPerc.ToString, sCurrSaw)
          End If
       End Set
    End Property
+   Friend Sub SetFsevPerc(value As Double)
+      If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVPERC, DoubleToString(value, 3), sMachIniFile) Then
+         m_dFsevPerc = value
+      End If
+   End Sub
 
    Friend ReadOnly Property ToolChangerNbr As Integer
       Get
@@ -1098,6 +1168,13 @@ Public Class CurrentMachine
       GetPrivateProfileString(S_PRODUCTIONLINE, K_PRODLIPROBINGTCPOS2VAR, "0", m_sProdLiProbingTcPos2Var, sMachIniFile)
       GetPrivateProfileString(S_PRODUCTIONLINE, K_PRODLISAWDIAMETER2VAR, "", m_sProdLiSawDiameter2Var, sMachIniFile)
 
+      GetPrivateProfileString(S_POLISHLINE, K_CLICKSTATE, "", m_sClickState, sMachIniFile)
+      GetPrivateProfileString(S_POLISHLINE, k_CLICKDIR, "", m_sClickDir, sMachIniFile)
+      If Not Directory.Exists(m_sClickDir) Then
+         m_sClickState = ""
+         EgtOutLog("Directory " & m_sClickDir & " does not exist")
+      End If
+
       ' Leggo configurazione degli utensili in macchina
       m_MountedToolConfig = GetPrivateProfileInt(S_TOOLS, K_MOUNTEDTOOLCONFIG, 0, sMachIniFile)
       ' Leggo flag presenza tipologie utensili
@@ -1154,6 +1231,8 @@ Public Class CurrentMachine
                         m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.ENABLE_WJ)
       ' possibilità di definire attacco speciale per materiali ceramici
       m_bSawingSpecialLeadIn = (GetPrivateProfileInt(S_MACHININGS, K_SAWINGSPECIALLEADIN, 0, sMachIniFile) > 0)
+      ' mantengo la direzione del taglio definita nel taglio diretto
+      m_bEnableInvetrt = (GetPrivateProfileInt(S_DIRECTCUTS, K_ENABLEINVERT, 1, sMachIniFile) <> 0)
 
       ' Leggo utensili correnti
       ' lama
@@ -1249,6 +1328,7 @@ Public Class CurrentMachine
 
       ' Leggo dati per feed ridotta all'inizio/fine dei tagli
       m_bFsevEnable = (GetPrivateProfileInt(S_NEST, K_MACH_CUTFSEVENABLE, 0, sMachIniFile) <> 0)
+      ' sposto la lettura nel DB delle lavorazioni della lama corrente!
       m_dFsevLength = GetPrivateProfileDouble(S_NEST, K_MACH_CUTFSEVLEN, 0, sMachIniFile)
       m_dFsevPerc = GetPrivateProfileDouble(S_NEST, K_MACH_CUTFSEVPERC, 0, sMachIniFile)
 
@@ -1304,6 +1384,29 @@ Public Class CurrentMachine
       m_nEnableBarCodeReader = GetPrivateProfileInt(S_MACH_BARCODEREADER, K_ENABLEBCR, 0, sMachIniFile)
    End Sub
 
+   ' Per il controllo FANUC al momento dell'inizializzazione del CN devono essere lette alcune variabili
+   Public Sub InitFANUC(CN_Generic As CN_generico)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nResetSendDelay = GetPrivateProfileInt(S_NCFANUC, K_RESETSENDDELAY, 1000, sMachIniFile)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nThreadSleep = GetPrivateProfileInt(S_NCFANUC, K_THREADSLEEP, 150, sMachIniFile)
+      ' Leggo i dati strettamente correlati alla comunicazione NC-PC
+      Dim CN As CN_generico = CN_Generic
+      ' Leggo l'indirizzo in cui scrivere lo stato macchina
+      Dim dAddNcMode As String = CN.s_addr_set_nc_mode
+      GetPrivateProfileString(S_NCFANUC, K_SETNCMODE, CN.s_addr_set_nc_mode, CN.s_addr_set_nc_mode, sMachIniFile)
+      ' Leggo primo indirizzo libero delle variabili di tipo intero
+      CN.n_Base_addr_int_vars = GetPrivateProfileInt(S_NCFANUC, K_BASEADDRINT, CN.n_Base_addr_int_vars, sMachIniFile)
+      ' Leggo primo indirizzo libero delle variabili di tipo bit
+      CN.n_Base_addr_byte_for_bits_vars = GetPrivateProfileInt(S_NCFANUC, K_BASEADDRBIT, CN.n_Base_addr_byte_for_bits_vars, sMachIniFile)
+      ' Leggo numero di variabili di tipo intero
+      CN.n_num_var_int_to_read = CShort(GetPrivateProfileInt(S_NCFANUC, K_NUMVARINT, CInt(CN.n_num_var_int_to_read), sMachIniFile))
+      ' Leggo numero di varibili di tipo bit
+      CN.n_num_var_byte_for_bits_to_read = CShort(GetPrivateProfileInt(S_NCFANUC, K_NUMVARBIT, CInt(CN.n_num_var_byte_for_bits_to_read), sMachIniFile))
+      ' Leggo variabile abilitata alla gestione di FeedHold
+      GetPrivateProfileString(S_NCFANUC, K_SETNCMODE, CN.s_addr_feedhold, CN.s_addr_feedhold, sMachIniFile)
+   End Sub
+
    Public Sub LoadWJMaterial(Optional bIsStart As Boolean = False)
       Dim TempCurrMat As Material = CurrMat
       ' Svuoto l'attuale lista di materiali
@@ -1311,7 +1414,7 @@ Public Class CurrentMachine
       ' Leggo valori da file Data e li carico nelle proprietà
       Dim sFilePath As String = sMachDir & "\" &  MACHININGS_DIR & "\" & WATERJETDB_FILE
       Dim Local_MaterialList = New ObservableCollection(Of EgtWPFLib5.WjMaterial)
-      Local_MaterialList = EgtWPFLib5.WaterjetDbWindowVM.LoadWjMaterials(sFilePath)
+      Local_MaterialList = WaterjetDbWindowVM_OmagCUT.LoadWjMaterials(sFilePath)
       ' definisco la lista delle qualità (solo se è vuota)
       If m_Qualities.Count < 1 Then
          m_Qualities.Add("Q1")
@@ -1342,7 +1445,7 @@ Public Class CurrentMachine
       ' Leggo valori da file Data e li carico nelle proprietà
       Dim sFilePath As String = sMachDir & "\" & MACHININGS_DIR & "\" & WATERJETDB_FILE
       Dim Local_MaterialList = New ObservableCollection(Of EgtWPFLib5.WjMaterial)
-      Local_MaterialList = EgtWPFLib5.WaterjetDbWindowVM.LoadWjMaterials(sFilePath)
+      Local_MaterialList = WaterjetDbWindowVM_OmagCUT.LoadWjMaterials(sFilePath)
       Dim sItems() As String = sCurMat.Split("."c)
       If sItems.Count > 1 Then
          Dim sMat As String = sItems(0)
@@ -1367,9 +1470,148 @@ Public Class CurrentMachine
             If bFound Then Exit For
          Next
       End If
-      Return dMaxThick
+      ' il valore resituito è già nell'unità corrente del programma -> converto il dato in mm
+      Dim dValmm As Double = 0
+      StringToLen(DoubleToString(dMaxThick, 3), dValmm)
+      Return dValmm
    End Function
 
+#Region "USERNOTE"
+
+   ' recupero le note UserNote associate alla LAVORAZIONE Machining
+   Friend Function MdbGetCurrMachiningUserNote(Machining As String) As String
+      Dim UserNotes As String = String.Empty
+      ' lavorazione corrente
+      Dim CurrMach As String = String.Empty
+      EgtMdbGetCurrMachiningParam(MCH_MP.NAME, CurrMach)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Machining) AndAlso EgtMdbSetCurrMachining(Machining) Then
+         ' leggo nel db corrente della lavorazione questa info
+         EgtMdbGetCurrMachiningParam(MCH_MP.USERNOTES, UserNotes)
+         ' reimposto lavorazione corrente
+         EgtMdbSetCurrMachining(CurrMach)
+      End If
+      Return UserNotes
+   End Function
+
+   ' recupero le note UserNote associate all'UTENSILE Tool
+   Friend Function TdbGetCurrToolUserNote(Tool As String) As String
+      Dim UserNotes As String = String.Empty
+      ' lavorazione corrente
+      Dim CurrTool As String = String.Empty
+      EgtTdbGetCurrToolParam(MCH_TP.NAME, CurrTool)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Tool) AndAlso EgtTdbSetCurrTool(Tool) Then
+         ' leggo nel db corrente della lavorazione questa info
+         EgtTdbGetCurrToolParam(MCH_TP.USERNOTES, UserNotes)
+         ' reimposto lavorazione corrente
+         EgtTdbSetCurrTool(CurrTool)
+      End If
+      Return UserNotes
+   End Function
+
+   ' imposta il nuovo valore in UserNote della LAVORAZIONE Machining
+   Friend Sub MdbSetCurrMachiningUserNote(sKeyUserNote As String, sValUserNote As String, Machining As String)
+      ' lavorazione corrente
+      Dim CurrMach As String = String.Empty
+      EgtMdbGetCurrMachiningParam(MCH_MP.NAME, CurrMach)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Machining) AndAlso EgtMdbSetCurrMachining(Machining) Then
+         Dim UserNotes As String = String.Empty
+         ' salvo nel db corrente della lavorazione questa info → devo gestire l'inserimento: sovrascrivo NON ESEGUE un APPEND delle info
+         EgtMdbSetCurrMachiningParam(MCH_MP.USERNOTES, AssembUserNote(sKeyUserNote, sValUserNote, Machining))
+         EgtMdbSaveCurrMachining()
+         EgtMdbSave()
+         ' reimposto lavorazione corrente
+         EgtMdbSetCurrMachining(CurrMach)
+      End If
+   End Sub
+
+   ' imposta il nuovo valore in UserNote dell'UTENSILE Tool
+   Friend Sub TdbSetCurrToolUserNote(sKeyUserNote As String, sValUserNote As String, Tool As String)
+      ' lavorazione corrente
+      Dim CurrTool As String = String.Empty
+      EgtTdbGetCurrToolParam(MCH_TP.NAME, CurrTool)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Tool) AndAlso EgtTdbSetCurrTool(Tool) Then
+         Dim UserNotes As String = String.Empty
+         ' salvo nel db corrente della lavorazione questa info → devo gestire l'inserimento: sovrascrivo NON ESEGUE un APPEND delle info
+         EgtTdbSetCurrToolParam(MCH_TP.USERNOTES, AssembUserNote(sKeyUserNote, sValUserNote, Tool))
+         EgtTdbSaveCurrTool()
+         EgtTdbSave()
+         ' reimposto lavorazione corrente
+         EgtTdbSetCurrTool(Tool)
+      End If
+   End Sub
+
+   ' separa la le note UserNote della LAVORAZIONE
+   Private Function SplitUserNoteMachinig(Machining As String) As String()
+      Dim sUserNotes As String = MdbGetCurrMachiningUserNote(Machining)
+      If String.IsNullOrEmpty(sUserNotes) Then Return Nothing
+      Dim sItems As String() = sUserNotes.Split(";"c)
+      Return sItems
+   End Function
+
+   ' separa la le note UserNote della LAVORAZIONE
+   Private Function SplitUserNoteTool(Tool As String) As String()
+      Dim sUserNotes As String = TdbGetCurrToolUserNote(Tool)
+      If String.IsNullOrEmpty(sUserNotes) Then Return Nothing
+      Dim sItems As String() = sUserNotes.Split(";"c)
+      Return sItems
+   End Function
+
+   ' recupera il valore della associato alla chiave per la lavorazione oppure utensile (bIsToolNote)
+   Friend Function GetUserNote(sKeyUserNote As String, ByRef sValUserNote As String, sName As String, Optional bIsToolNote As Boolean = True) As Boolean
+      Dim sUserNotesList As String() = Nothing
+      If bIsToolNote Then
+         sUserNotesList = SplitUserNoteTool(sName)
+      Else
+         sUserNotesList = SplitUserNoteMachinig(sName)
+      End If
+      If IsNothing(sUserNotesList) Then Return False
+      For Index As Integer = 0 To sUserNotesList.Count - 1
+         Dim sNote As String() = sUserNotesList(Index).Split("="c)
+         If sNote.Count = 2 AndAlso sNote(0).Trim = sKeyUserNote Then
+            sValUserNote = sNote(1).Trim
+         End If
+      Next
+      Return True
+   End Function
+
+   ' ricostruisce la stringa UserNote da salvare
+   Friend Function AssembUserNote(sKeyUserNote As String, sValUserNote As String, sName As String, Optional bIsToolNote As Boolean = True) As String
+      Dim sUserNotes As String = String.Empty
+      Dim sUserNotesList As String() = Nothing
+      If bIsToolNote Then
+         sUserNotesList = SplitUserNoteTool(sName)
+      Else
+         sUserNotesList = SplitUserNoteMachinig(sName)
+      End If
+      Dim bExists As Boolean = False
+      If Not IsNothing(sUserNotesList) Then
+         For Index As Integer = 0 To sUserNotesList.Count - 1
+            Dim sNote As String() = sUserNotesList(Index).Split("="c)
+            If sNote.Count = 2 AndAlso sNote(0).Trim = sKeyUserNote Then
+               sUserNotesList(Index) = sKeyUserNote & "=" & sValUserNote
+               bExists = True
+               Exit For
+            End If
+         Next
+         ' riassemblo la stringa
+         For Each Item As String In sUserNotesList
+            If Not String.IsNullOrWhiteSpace(Item) Then
+               sUserNotes &= Item & ";"
+            End If
+         Next
+      End If
+      If Not bExists Then
+         sUserNotes &= sKeyUserNote & "=" & sValUserNote & ";"
+      End If
+      Return sUserNotes
+   End Function
+
+#End Region    ' USERNOTE
+
    Friend Function IsVacuumMovePossible() As Boolean
       ' Recupero diametro lama corrente
       EgtTdbSetCurrTool(sCurrSaw)

Machine/MachineCNPageUC.xaml

@@ -34,16 +34,21 @@
                   <ColumnDefinition Width="1.5*"/>
                </Grid.ColumnDefinitions>
 
-               <Button Name="AutoBtn" Grid.Column="0"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="ManualBtn" Grid.Column="1"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="MDIBtn" Grid.Column="2"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="SingleBtn" Grid.Column="3"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="HomeBtn" Grid.Column="4"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <ToggleButton Name="AutoBtn" Grid.Column="0"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
+               <ToggleButton Name="ManualBtn" Grid.Column="1"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
+               <ToggleButton Name="MDIBtn" Grid.Column="2"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
+               <ToggleButton Name="SingleBtn" Grid.Column="3"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
+               <ToggleButton Name="HomeBtn" Grid.Column="4"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
 
             </Grid>
 
@@ -57,7 +62,7 @@
                   <ColumnDefinition Width="2*"/>
                </Grid.ColumnDefinitions>
 
-                    <Button Name="StartBtn" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="StartBtn" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
                <Button Name="StopBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
                <Button Name="ResetBtn" Grid.Column="2"

Machine/MachineCNPageUC.xaml.vb

@@ -8,6 +8,8 @@ Public Class MachineCNPageUC
    Private m_bFirst As Boolean = True
    Private m_ButtonPower As New List(Of MachineButton)
 
+   Private m_nCurrMode As Integer = 0
+
    Private Sub TestingPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       StartBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 1)
       StopBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 2)
@@ -51,6 +53,9 @@ Public Class MachineCNPageUC
          PartProgTransferGpBx.Visibility = Windows.Visibility.Hidden
       End If
 
+      ' gestione visuliazzazione ToggleButton Auto/Sinlge/Mdi/Manula/Home
+      SetCncMode()
+
       '------ NUOVI BOTTONI ----------
       ' Lettura configurazione bottoni (per impostare l'uso del Joystick) da Ini di macchina
       m_ButtonPower.Clear()
@@ -98,6 +103,53 @@ Public Class MachineCNPageUC
 
    End Sub
 
+   Private Sub SetCncMode()
+      Dim Mode As Integer = m_nCurrMode
+      Select Case Mode
+         Case 0
+            ' Auoto
+            MDIConfirmBtn.IsEnabled = False
+            AutoBtn.IsChecked = True
+            SingleBtn.IsChecked = False
+            MDIBtn.IsChecked = False
+            ManualBtn.IsChecked = False
+            HomeBtn.IsChecked = False
+         Case 1
+            ' Single
+            MDIConfirmBtn.IsEnabled = False
+            AutoBtn.IsChecked = False
+            SingleBtn.IsChecked = True
+            MDIBtn.IsChecked = False
+            ManualBtn.IsChecked = False
+            HomeBtn.IsChecked = False
+         Case 2
+            ' Mdi
+            MDIConfirmBtn.IsEnabled = True
+            AutoBtn.IsChecked = False
+            SingleBtn.IsChecked = False
+            MDIBtn.IsChecked = True
+            ManualBtn.IsChecked = False
+            HomeBtn.IsChecked = False
+         Case 7
+            ' Manual
+            MDIConfirmBtn.IsEnabled = False
+            AutoBtn.IsChecked = False
+            SingleBtn.IsChecked = False
+            MDIBtn.IsChecked = False
+            ManualBtn.IsChecked = True
+            HomeBtn.IsChecked = False
+         Case 8
+            ' Home
+            MDIConfirmBtn.IsEnabled = False
+            AutoBtn.IsChecked = False
+            SingleBtn.IsChecked = False
+            MDIBtn.IsChecked = False
+            ManualBtn.IsChecked = False
+            HomeBtn.IsChecked = True
+      End Select
+
+   End Sub
+
    Private Sub StartBtn_Click(sender As Object, e As RoutedEventArgs) Handles StartBtn.Click
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          Dim sDBVarPath As String = ""
@@ -278,4 +330,9 @@ Public Class MachineCNPageUC
       End If
    End Sub
 
+   Friend Sub CncModeChange(nMode As Integer)
+      m_nCurrMode = nMode
+      SetCncMode()
+   End Sub
+
 End Class

Machine/MachinePageUC.xaml.vb

@@ -145,12 +145,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.Alarms
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                AlarmsBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -215,12 +215,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.ToolsDb
          Case MachinePages.WaterJet
             'Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                ToolsDBBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -285,12 +285,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.MachiningDb
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                MachiningDBBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -358,12 +358,12 @@ Public Class MachinePageUC
             PolishingsBtn.IsChecked = True
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                PolishingsBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -513,12 +513,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.MachineCN
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                TestingPageBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina
@@ -593,12 +593,12 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.Statistics
          Case MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
-            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                StatisticsBtn.IsChecked = False
                WaterJetBtn.IsChecked = True
                Return
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
             ' passo alla pagina Dati Macchina

Machine/MachineStatusUC.xaml.vb

@@ -248,16 +248,16 @@ Public Class MachineStatusUC
          dL3 = ptTip.z
       End If
       ' Visualizzazione
-      Axis1TxBx.Text = LenToString(dL1, -3)
-      Axis2TxBx.Text = LenToString(dL2, -3)
-      Axis3TxBx.Text = LenToString(dL3, -3)
+      Axis1TxBx.Text = LenToString(dL1, -3, True)
+      Axis2TxBx.Text = LenToString(dL2, -3, True)
+      Axis3TxBx.Text = LenToString(dL3, -3, True)
       Axis4TxBx.Text = DoubleToString(dR1, -3)
       Axis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then Axis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayPositionDelta()
@@ -265,22 +265,28 @@ Public Class MachineStatusUC
       Dim dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10 As Double
       m_MainWindow.m_CNCommunication.GetAxesDeltas(dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10)
       ' Visualizzazione
-      DeltaAxis1TxBx.Text = LenToString(dL1, -3)
-      DeltaAxis2TxBx.Text = LenToString(dL2, -3)
-      DeltaAxis3TxBx.Text = LenToString(dL3, -3)
+      DeltaAxis1TxBx.Text = LenToString(dL1, -3, True)
+      DeltaAxis2TxBx.Text = LenToString(dL2, -3, True)
+      DeltaAxis3TxBx.Text = LenToString(dL3, -3, True)
       DeltaAxis4TxBx.Text = DoubleToString(dR1, -3)
       DeltaAxis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then DeltaAxis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayFeed()
       Dim dRealFeed As Double = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+      ' modifica richiesta 26/05/2023 da Rosario per cliente Lanzetta
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         dRealFeed = m_CN.d_DInterpo_Prog_Feed
+      Else
+         dRealFeed = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+      End If
       'Feed = DoubleToString(dRealFeed, 0)
-      FeedTxBx.Text = LenToString(dRealFeed, 0)
+      FeedTxBx.Text = LenToString(dRealFeed, 0, True)
       'FeedOverride = DoubleToString(m_CN.d_DInterpo_Feed_override, 0) & "%"
       Dim dFeedOverride As Double = m_CN.d_DInterpo_Feed_override
       FeedOverrideTxBx.Text = DoubleToString(dFeedOverride, 0) & "%"
@@ -304,6 +310,8 @@ Public Class MachineStatusUC
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          dSpindlePower = m_CN.d_data(0)
          dSpindleOvr = m_CN.d_data(1)
+      ElseIf m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         dSpindlePower = m_CN.d_spindle_power / 1000
       Else
          dSpindlePower = m_CN.d_spindle_power
          dSpindleOvr = If(m_CN.bPowerOvr > 0, m_CN.d_spindle_power / m_CN.bPowerOvr * 100, 0)

Machine/MachiningDbPageUC.xaml

@@ -246,7 +246,7 @@
 
             <TextBlock Name="SideAngleTxBl" Grid.Column="2" Grid.Row="3" Grid.RowSpan="3"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="3" Grid.Row="3" Grid.RowSpan="3" Margin="0,0,15,0"
+            <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="3" Grid.Row="3" Grid.RowSpan="3" Margin="0,0,15,0" IsLength="False"
                Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
             <TextBlock Name="StepTypeTxBl" Grid.Column="0" Grid.Row="6" Grid.RowSpan="3"
@@ -576,7 +576,7 @@
 
                 <TextBlock Name="ForwardAngleTxBl" Grid.Column="0" Grid.Row="6" Grid.RowSpan="3"
                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                <EgtWPFLib:EgtTextBox Name="ForwardAngleTxBx" Grid.Column="1" Grid.Row="6" Grid.RowSpan="3"
+                <EgtWPFLib:EgtTextBox Name="ForwardAngleTxBx" Grid.Column="1" Grid.Row="6" Grid.RowSpan="3" IsLength="False"
                      Style="{DynamicResource OmagCut_MachLeftCalculatorTextBoxInBorder}" />
 
                 <Border Name="LiHoleBrd" Grid.Column="0" Grid.Row="9" Grid.ColumnSpan="4" Grid.RowSpan="6"
@@ -605,12 +605,12 @@
 
                         <TextBlock Name="LpTurnsTxBl" Grid.Column="0" Grid.Row="1" Grid.RowSpan="2" 
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                        <EgtWPFLib:EgtTextBox Name="LpTurnsTxBx" Grid.Column="1" Grid.Row="1"
+                        <EgtWPFLib:EgtTextBox Name="LpTurnsTxBx" Grid.Column="1" Grid.Row="1" IsLength="False"
                              Style="{DynamicResource OmagCut_MachLeftCalculatorTextBoxInBorder}" />
 
                         <TextBlock Name="HpTurnsTxBl" Grid.Column="2" Grid.Row="1"
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                        <EgtWPFLib:EgtTextBox Name="HpTurnsTxBx" Grid.Column="3" Grid.Row="1"
+                        <EgtWPFLib:EgtTextBox Name="HpTurnsTxBx" Grid.Column="3" Grid.Row="1" IsLength="False"
                              Style="{DynamicResource OmagCut_MachLeftCalculatorTextBoxInBorder}" />
 
                     </Grid>
@@ -725,7 +725,7 @@
 
                <TextBlock Name="SpeedTxBl" Grid.Column="0"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1"
+               <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1" IsLength="False"
                   Style="{DynamicResource OmagCut_MachToolCalculatorTextBox}" />
 
             </Grid>

Machine/MachiningDbPageUC.xaml.vb

@@ -899,11 +899,11 @@ Public Class MachiningDbPageUC
       For Each Material As MachiningMaterial In m_MaterialsList
          If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
             If Material.bIsActive Then
-               sMaterialString += Material.nId.ToString & "." & Material.nSubId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
+               sMaterialString += Material.nId.ToString & "." & Material.nSubId.ToString & "," & DoubleToString(Material.dMinThickness, 3) & "," & DoubleToString(Material.dMaxThickness, 3) & ";"
             End If
          Else
             If Material.bIsActive Then
-               sMaterialString += Material.nId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
+               sMaterialString += Material.nId.ToString & "," & DoubleToString(Material.dMinThickness, 3) & "," & DoubleToString(Material.dMaxThickness, 3) & ";"
             End If
          End If
       Next

Machine/PolishingsPageUC.xaml.vb

@@ -61,8 +61,8 @@ Public Class PolishingsPageUC
       RepeatTxBl.Text = EgtMsg(91093)             ' Ripetizioni
       StepTxBl.Text = EgtMsg(90787)               ' Passo
       OffSetTxBl.Text = EgtMsg(91089)             ' Offset
-      RadiusTxBl.Text = "Raggio"
-      DistanceTxBl.Text = "Distanza"
+      RadiusTxBl.Text = EgtMsg(91139)             ' Raggio
+      DistanceTxBl.Text = EgtMsg(91140)           ' Distanza
       LiLoGpBx.Header = EgtMsg(91094)             ' Attacco/Uscita
       LiLenTxBl.Text = EgtMsg(91097)              ' Lunghezza
       LiHeightTxBl.Text = EgtMsg(91095)           ' Altezza

Machine/StatisticsPageUC.xaml.vb

@@ -36,7 +36,7 @@ Public Class StatisticsPageUC
       DayTxBl.Text = sDay
       ' Leggo il numero della settimana
       Dim nWeek As Integer = GetPrivateProfileInt(S_STATDATA, K_SD_WEEK, -1, m_MainWindow.GetIniFile())
-      WeekTxBl.Text = ( nWeek + 1).ToString()
+      WeekTxBl.Text = (nWeek).ToString()
 
       ' Leggo area pezzi del giorno
       Dim dDayParts As Double = GetPrivateProfileDouble(S_STATDATA, K_SD_DAYPARTS, 0, m_MainWindow.GetIniFile())

Machine/ToolChangerPosUC.xaml

@@ -9,7 +9,7 @@
    <!-- Definizione del ToolHolderUc -->
    <Grid>
       <Image Source="/Resources/ToolChangerPos.png"/>
-      <ToggleButton Name="Tool" Width="50" Height="50" Margin="22,40,26,8" Background="#7FB4B4B4">
+      <ToggleButton Name="Tool" Width="50" Height="50" Margin="62,10,16,10" Background="#7FB4B4B4">
          <ToggleButton.Template>
             <ControlTemplate TargetType="{x:Type ToggleButton}">
                <Grid>
@@ -25,7 +25,7 @@
 
          </ToggleButton.Template>
       </ToggleButton>
-      <TextBlock Name="PositionNameTxBl" Height="22" Width="68" FontSize="16" Margin="12,16,41,61"/>
+      <TextBlock Name="PositionNameTxBl" Height="22" Width="50" FontSize="16" Margin="20,40,70,53"/>
 
    </Grid>
 </UserControl>

Machine/ToolsDbPageUC.xaml

@@ -281,12 +281,12 @@
                   </Grid.ColumnDefinitions>
 
                   <TextBlock Name="SpeedTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1"
+                  <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1" IsLength="False"
                      Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                   <TextBlock Name="MaxSpeedTxBl" Grid.Column="2"
                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="MaxSpeedTxBx" Grid.Column="3"
+                  <EgtWPFLib:EgtTextBox Name="MaxSpeedTxBx" Grid.Column="3" IsLength="False"
                      Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                </Grid>
@@ -384,7 +384,7 @@
 
                   <TextBlock Name="MaxAbsorptionTxBl" Grid.Column="0"
                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="1" ScrollViewer.VerticalScrollBarVisibility="Disabled" TextWrapping="Wrap"/>
-                  <EgtWPFLib:EgtTextBox Name="MaxAbsorptionTxBx" Grid.Column="1" 
+                  <EgtWPFLib:EgtTextBox Name="MaxAbsorptionTxBx" Grid.Column="1" IsLength="False"
                      Style="{DynamicResource OmagCut_LeftCalculatorTextBoxInBorder}" />
 
                   <TextBlock Name="MinFeedTxBl" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />

Machine/WaterJetPageUC.xaml

@@ -8,256 +8,266 @@
    mc:Ignorable="d" 
    d:DesignHeight="768" d:DesignWidth="1280" Initialized="WaterJetPage_Initialized">
 
-    <!-- Definizione della PolishingsPage -->
-    <Border Style="{DynamicResource OmagCut_PageBorder}">
+   <!-- Definizione della PolishingsPage -->
+   <Border Style="{DynamicResource OmagCut_PageBorder}">
 
-        <Grid Name="WaterJetPageGrid" >
-            <Grid.ColumnDefinitions>
-                <ColumnDefinition Width="3*"/>
-                <ColumnDefinition Width="8*"/>
-                <ColumnDefinition Width="4*"/>
-            </Grid.ColumnDefinitions>
-            <Grid.RowDefinitions>
-                <RowDefinition Height="8*"/>
-                <RowDefinition Height="1*"/>
-            </Grid.RowDefinitions>
+      <Grid Name="WaterJetPageGrid" >
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="8*"/>
+            <ColumnDefinition Width="4*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+         </Grid.RowDefinitions>
 
-            <!--Lista dei materiali-->
-            <GroupBox Name="MaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
+         <!--Lista dei materiali-->
+         <GroupBox Name="MaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
                       Header="{Binding Material_Msg}"
                       Grid.Row="0" BorderThickness="0">
 
-                <Grid>
-                    <Grid.RowDefinitions>
-                        <RowDefinition Height="7*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                    </Grid.RowDefinitions>
+            <Grid>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="7*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+               </Grid.RowDefinitions>
 
-                    <!--Lista dei materiali-->
-                    <ListBox Name="MaterialsLstBx" 
+               <!--Lista dei materiali-->
+               <ListBox Name="MaterialsLstBx" 
                              ItemsSource="{Binding MaterialList}" SelectedItem="{Binding SelMaterial}"
                              Grid.RowSpan="2">
-                        <ListBox.ItemTemplate>
-                            <DataTemplate>
-                                <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                            </DataTemplate>
-                        </ListBox.ItemTemplate>
-                    </ListBox>
-                    <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
-                    <EgtWPFLib:EgtTextBox Name="NewMaterialNameTxBx" Grid.Row="1" 
+                  <ListBox.ItemTemplate>
+                     <DataTemplate>
+                        <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                     </DataTemplate>
+                  </ListBox.ItemTemplate>
+               </ListBox>
+               <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
+               <EgtWPFLib:EgtTextBox Name="NewMaterialNameTxBx" Grid.Row="1" 
                                           Width="220"
                                           Text="{Binding sNewMaterial}"
                                           Visibility="{Binding NewMaterial_Visibility}"
                                           Style="{DynamicResource OmagCut_KeyboardTextBox}" 
                                           KeyboardPosition="Top"/>
-                    <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
-                    <UniformGrid Grid.Row="2" Columns="3">
-                        <Button Name="NewMaterialBtn" Grid.Column="0"
+               <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
+               <UniformGrid Grid.Row="2" Columns="3">
+                  <Button Name="NewMaterialBtn" Grid.Column="0"
                                 Content="{Binding New_Msg}"
                                 Command="{Binding NewMaterialCommand}"
                                 Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                        <Button Name="DeleteMaterialBtn" Grid.Column="1"
+                  <Button Name="DeleteMaterialBtn" Grid.Column="1"
                                 Content="{Binding Delete_Msg}"
                                 Command="{Binding DeleteMaterialCommand}"
                                 Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                        <Button Name="ModifyMaterialBtn" Grid.Column="1"
+                  <Button Name="ModifyMaterialBtn" Grid.Column="1"
                                 Content="{Binding Modify_Msg}"
                                 Command="{Binding ModifyMaterialCommand}"
                                 Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                    </UniformGrid>
+               </UniformGrid>
 
-                </Grid>
+            </Grid>
 
-            </GroupBox>
+         </GroupBox>
 
-            <!--Raggruppo all'interno della stessa cornice le sottocatogorie e i parametri-->
-            <Border Style="{DynamicResource OmagCut_Border}" 
+         <!--Raggruppo all'interno della stessa cornice le sottocatogorie e i parametri-->
+         <Border Style="{DynamicResource OmagCut_Border}" 
                     Grid.Column="1" Grid.Row="0" 
                     Grid.ColumnSpan="2" Grid.RowSpan="1">
 
-                <Grid Name="SubMaterialGrd" Grid.Column="1">
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="2*"/>
-                    </Grid.ColumnDefinitions>
-                    <Grid.RowDefinitions>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                    </Grid.RowDefinitions>
+            <Grid Name="SubMaterialGrd" Grid.Column="1">
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+               </Grid.RowDefinitions>
 
-                    <!--Sottocategoria dei materiali associata alla lista precedente-->
-                    <GroupBox Name="SubMaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" 
+               <!--Sottocategoria dei materiali associata alla lista precedente-->
+               <GroupBox Name="SubMaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" 
                               Header="{Binding SubMaterial_Msg}"
                               Grid.Column="0" Grid.Row="0" 
                               Grid.ColumnSpan="1" Grid.RowSpan="8" BorderThickness="0">
 
-                        <Grid Grid.Column="1">
-                            <Grid.RowDefinitions>
-                                <RowDefinition Height="7*"/>
-                                <RowDefinition Height="1*"/>
-                                <RowDefinition Height="1*"/>
-                            </Grid.RowDefinitions>
+                  <Grid Grid.Column="1">
+                     <Grid.RowDefinitions>
+                        <RowDefinition Height="7*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                     </Grid.RowDefinitions>
 
-                            <!--Lista dei materiali-->
-                            <ListBox Name="SubMaterialsLstBx" ItemsSource="{Binding Path=SelectedItem.SubMaterialList, ElementName=MaterialsLstBx}"
+                     <!--Lista dei materiali-->
+                     <ListBox Name="SubMaterialsLstBx" ItemsSource="{Binding Path=SelectedItem.SubMaterialList, ElementName=MaterialsLstBx}"
                                      SelectedItem="{Binding Path=SelectedItem.SelSubMaterial, ElementName=MaterialsLstBx}"
                                      Grid.RowSpan="2">
-                                <ListBox.ItemTemplate>
-                                    <DataTemplate>
-                                        <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                                    </DataTemplate>
-                                </ListBox.ItemTemplate>
-                            </ListBox>
+                        <ListBox.ItemTemplate>
+                           <DataTemplate>
+                              <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                           </DataTemplate>
+                        </ListBox.ItemTemplate>
+                     </ListBox>
 
-                            <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
-                            <EgtWPFLib:EgtTextBox Name="NewSubMaterialNameTxBx" Grid.Row="1" 
+                     <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
+                     <EgtWPFLib:EgtTextBox Name="NewSubMaterialNameTxBx" Grid.Row="1" 
                                                   Width="220"
                                                   Text="{Binding sNewSubMaterial}"
                                                   Visibility="{Binding NewSubMaterial_Visibility}"
                                                   Style="{DynamicResource OmagCut_KeyboardTextBox}" 
                                                   KeyboardPosition="Top"/>
 
-                            <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
-                            <UniformGrid Grid.Row="2" Columns="3">
-                                <Button Name="NewSubMaterialBtn" Grid.Column="0"
+                     <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
+                     <UniformGrid Grid.Row="2" Columns="3">
+                        <Button Name="NewSubMaterialBtn" Grid.Column="0"
                                         Content="{Binding New_Msg}"
                                         Command="{Binding NewSubMaterialCommand}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                                <Button Name="RemoveSubMaterialBtn" Grid.Column="1"
+                        <Button Name="RemoveSubMaterialBtn" Grid.Column="1"
                                         Content="{Binding Delete_Msg}"
                                         Command="{Binding DeleteSubMaterialCommand}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                                <Button Name="ModifySubMaterialBtn" Grid.Column="1"
+                        <Button Name="ModifySubMaterialBtn" Grid.Column="1"
                                         Content="{Binding Modify_Msg}"
                                         Command="{Binding ModifySubMaterialCommand}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                            </UniformGrid>
+                     </UniformGrid>
 
-                        </Grid>
+                  </Grid>
 
-                    </GroupBox>
+               </GroupBox>
 
-                    <!--Lista dei parametri associata alla sottovcategoria dei materiali-->
-                    <GroupBox Name="ParamsGpBx" 
+               <!--Lista dei parametri associata alla sottovcategoria dei materiali-->
+               <GroupBox Name="ParamsGpBx" 
                               Grid.Column="1" Grid.Row="0" Margin="0,0,0,3"
                               Grid.ColumnSpan="3" Grid.RowSpan="8" BorderThickness="0">
-                        
-                        <!--Titolazione delle colonne della tabella-->
-                        <GroupBox.Header >
-                            <Grid Width="700">
-                                <Grid.ColumnDefinitions>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                </Grid.ColumnDefinitions>
 
-                                <TextBlock Text="{Binding Thickness_Msg}" Grid.Column="0" HorizontalAlignment="Center"
+                  <!--Titolazione delle colonne della tabella-->
+                  <GroupBox.Header >
+                     <Grid Width="700">
+                        <Grid.ColumnDefinitions>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                        </Grid.ColumnDefinitions>
+
+                        <TextBlock Text="{Binding Thickness_Msg}" Grid.Column="0" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                                <TextBlock Text="{Binding Q1_Msg}" Grid.Column="1" HorizontalAlignment="Center"
+                        <TextBlock Text="{Binding Q1_Msg}" Grid.Column="1" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                                <TextBlock Text="{Binding Q2_Msg}" Grid.Column="2" HorizontalAlignment="Center"
+                        <TextBlock Text="{Binding Q2_Msg}" Grid.Column="2" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                                <TextBlock Text="{Binding Q3_Msg}" Grid.Column="3" HorizontalAlignment="Center"
+                        <TextBlock Text="{Binding Q3_Msg}" Grid.Column="3" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                                <TextBlock Text="{Binding Q4_Msg}" Grid.Column="4" HorizontalAlignment="Center"
+                        <TextBlock Text="{Binding Q4_Msg}" Grid.Column="4" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                                <TextBlock Text="{Binding Q5_Msg}" Grid.Column="5" HorizontalAlignment="Center"
+                        <TextBlock Text="{Binding Q5_Msg}" Grid.Column="5" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                                <TextBlock Text="{Binding QExtra_Msg}" Grid.Column="6" HorizontalAlignment="Center"
+                        <TextBlock Text="{Binding QExtra_Msg}" Grid.Column="6" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                            </Grid>
-                            
-                        </GroupBox.Header>
-                        
-                        <!--Definizione della Grid dei parametri delle lavorazioni-->
-                        <Grid Grid.Column="2">
-                            <Grid.RowDefinitions>
-                                <RowDefinition Height="7*"/>
-                                <RowDefinition Height="1*"/>
-                                <RowDefinition Height="1*"/>
-                            </Grid.RowDefinitions>
+                        <TextBlock Text="{Binding AngComp_Msg}" Grid.Column="7" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                     </Grid>
 
-                            <ListBox Name="ParamLstBx"
+                  </GroupBox.Header>
+
+                  <!--Definizione della Grid dei parametri delle lavorazioni-->
+                  <Grid Grid.Column="2">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="308*"/>
+                        <ColumnDefinition Width="73*"/>
+                     </Grid.ColumnDefinitions>
+                     <Grid.RowDefinitions>
+                        <RowDefinition Height="7*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                     </Grid.RowDefinitions>
+
+                     <ListBox Name="ParamLstBx"
                                      ItemsSource="{Binding Path=SelectedItem.ParamList , ElementName=SubMaterialsLstBx}"
                                      SelectedItem="{Binding Path=SelectedItem.SelWjParam , ElementName=SubMaterialsLstBx}"
                                      Margin="0,0,0,0"
-                                     Grid.RowSpan="2">
-                                <ListBox.ItemTemplate>
-                                    <DataTemplate>
-                                        <Grid Width="700">
-                                            <Grid.ColumnDefinitions>
-                                                <ColumnDefinition Width="1*"/>
-                                                <ColumnDefinition Width="1*"/>
-                                                <ColumnDefinition Width="1*"/>
-                                                <ColumnDefinition Width="1*"/>
-                                                <ColumnDefinition Width="1*"/>
-                                                <ColumnDefinition Width="1*"/>
-                                                <ColumnDefinition Width="1*"/>
-                                            </Grid.ColumnDefinitions>
+                                     Grid.RowSpan="2" Grid.ColumnSpan="2">
+                        <ListBox.ItemTemplate>
+                           <DataTemplate>
+                              <Grid Width="700">
+                                 <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                 </Grid.ColumnDefinitions>
 
-                                            <EgtWPFLib:EgtTextBox Text="{Binding Thickness}" Grid.Column="0"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Thickness}" Grid.Column="0"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                            <EgtWPFLib:EgtTextBox Text="{Binding Q1}" Grid.Column="1"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q1}" Grid.Column="1"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                            <EgtWPFLib:EgtTextBox Text="{Binding Q2}" Grid.Column="2"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q2}" Grid.Column="2"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                            <EgtWPFLib:EgtTextBox Text="{Binding Q3}" Grid.Column="3"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q3}" Grid.Column="3"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                            <EgtWPFLib:EgtTextBox Text="{Binding Q4}" Grid.Column="4"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q4}" Grid.Column="4"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                            <EgtWPFLib:EgtTextBox Text="{Binding Q5}" Grid.Column="5"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q5}" Grid.Column="5"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                            <EgtWPFLib:EgtTextBox Text="{Binding QExtra}" Grid.Column="6"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding QExtra}" Grid.Column="6"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                 <EgtWPFLib:EgtTextBox Text="{Binding dAngComp}" Grid.Column="7" IsLength="False"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                              </Grid>
+                           </DataTemplate>
+                        </ListBox.ItemTemplate>
+                     </ListBox>
 
-                                        </Grid>
-                                    </DataTemplate>
-                                </ListBox.ItemTemplate>
-                            </ListBox>
-
-                            <UniformGrid Grid.Row="2" Columns="9" Grid.ColumnSpan="3">
-                                <Button Name="NewParamBtn" Grid.Column="0"
+                     <UniformGrid Grid.Row="2" Columns="9" Grid.ColumnSpan="2">
+                        <Button Name="NewParamBtn" Grid.Column="0"
                                         Command="{Binding NewWjParamCommand}"
                                         Content="{Binding New_Msg}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                                <Button Name="RemoveParamBtn" Grid.Column="1"
+                        <Button Name="RemoveParamBtn" Grid.Column="1"
                                         Command="{Binding DeleteWjParamCommand}"
                                         Content="{Binding Delete_Msg}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                            </UniformGrid>
+                     </UniformGrid>
 
-                        </Grid>
+                  </Grid>
 
-                    </GroupBox>
+               </GroupBox>
 
-                </Grid>
-            </Border>
-            <Button Name="SaveKitBtn" Grid.Row="2" Grid.Column="2"
+            </Grid>
+         </Border>
+         <Button Name="SaveKitBtn" Grid.Row="2" Grid.Column="2"
                     Command="{Binding SaveCommand}"
                     Content="{Binding Save_Msg}"
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-        </Grid>
+      </Grid>
 
-    </Border>
+   </Border>
 
 </UserControl>

Machine/WaterJetPageUC.xaml.vb

@@ -8,18 +8,26 @@ Public Class WaterJetPageUC
 
    ' Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
-   Private m_refWaterjetDbWindowVM As EgtWPFLib5.WaterjetDbWindowVM
+   Private m_refWaterjetDbWindowVM As WaterjetDbWindowVM_OmagCUT
    Private m_sOrigNewMaterial As String = String.Empty
    Private m_sOrigNewSubMaterial As String = String.Empty
 
    Private Sub WaterJetPage_Initialized(sender As Object, e As EventArgs)
-      m_refWaterjetDbWindowVM = New EgtWPFLib5.WaterjetDbWindowVM(m_MainWindow.m_CurrentMachine.sMachDir)
+      m_refWaterjetDbWindowVM = New WaterjetDbWindowVM_OmagCUT(m_MainWindow.m_CurrentMachine.sMachDir)
+      '----------------------------------------------------------------------------------------
+      ' TEMPORANEO - se dati in INCH e richiesta di frazioni eseguo la conversione in frazione!
+      ConvertParamListValueToFracrion()
+      '----------------------------------------------------------------------------------------
       Me.DataContext = m_refWaterjetDbWindowVM
       EgtWPFLib.Utility.MainWindow = m_MainWindow
    End Sub
 
    Public Sub WaterJetPage_Reinitialize()
-      m_refWaterjetDbWindowVM = New EgtWPFLib5.WaterjetDbWindowVM(m_MainWindow.m_CurrentMachine.sMachDir)
+      m_refWaterjetDbWindowVM = New WaterjetDbWindowVM_OmagCUT(m_MainWindow.m_CurrentMachine.sMachDir)
+      '----------------------------------------------------------------------------------------
+      ' TEMPORANEO - se dati in INCH e richiesta di frazioni eseguo la conversione in frazione!
+      ConvertParamListValueToFracrion()
+      '----------------------------------------------------------------------------------------
       Me.DataContext = m_refWaterjetDbWindowVM
    End Sub
 
@@ -51,5 +59,48 @@ Public Class WaterJetPageUC
       End If
    End Sub
 
+   Private Sub ConvertParamListValueToFracrion()
+      ' TEMPORANEO - se dati in INCH e richiesta di frazioni eseguo la conversione in frazione!
+      Dim Index1 As Integer = 0
+      For Index1 = 0 To m_refWaterjetDbWindowVM.MaterialList.Count - 1
+         Dim Index2 As Integer = 0
+         For Index2 = 0 To m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList.Count - 1
+            Dim Index3 As Integer = 0
+            For Index3 = 0 To m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList.Count - 1
+               Dim dThickness As Double
+               Dim dQ1 As Double
+               Dim dQ2 As Double
+               Dim dQ3 As Double
+               Dim dQ4 As Double
+               Dim dQ5 As Double
+               Dim dQExtra As Double
+               Dim dAngComp As Double
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Thickness, dThickness)
+               Dim sVal As String = LenToString(dThickness, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetThickness(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q1, dQ1)
+               sVal = LenToString(dQ1, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ1(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q2, dQ2)
+               sVal = LenToString(dQ2, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ2(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q3, dQ3)
+               sVal = LenToString(dQ3, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ3(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q4, dQ4)
+               sVal = LenToString(dQ4, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ4(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q5, dQ5)
+               sVal = LenToString(dQ5, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ5(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).QExtra, dQExtra)
+               sVal = LenToString(dQExtra, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQExtra(sVal)
+               StringToDouble(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).dAngComp, dAngComp)
+            Next
+         Next
+      Next
+   End Sub
+
 End Class
 

Machine/WaterJetPageVM.vb

@@ -445,6 +445,12 @@ Public Class WaterjetDbWindowVM
       End Get
    End Property
 
+   Public ReadOnly Property AngComp_Msg As String
+      Get
+         Return "Ang"
+      End Get
+   End Property
+
    Public ReadOnly Property New_Msg As String
       Get
          Return "Nuovo"
@@ -516,7 +522,14 @@ Public Class WaterjetDbWindowVM
                         StringToDouble(sParams(4), dQ4)
                         StringToDouble(sParams(5), dQ5)
                         StringToDouble(sParams(6), dQExtra)
-                        QParamList.Add(New WjParam(QInd, dThickness, dQ1, dQ2, dQ3, dQ4, dQ5, dQExtra, m_refWaterPageV))
+                        Dim LocalWjParam As New WjParam(QInd, dThickness, dQ1, dQ2, dQ3, dQ4, dQ5, dQExtra, m_refWaterPageV)
+                        QParamList.Add(LocalWjParam)
+                        ' leggo il nuovo parametro di correzione conicità (di default il parametro è 0)
+                        If sParams.Length() >= 8 Then
+                           Dim dAngCompo As Double
+                           StringToDouble(sParams(7), dAngCompo)
+                           LocalWjParam.dAngComp = dAngCompo
+                        End If
                      End If
                      QInd += 1
                   End While
@@ -868,6 +881,17 @@ Public Class WjParam
       End Set
    End Property
 
+   ' angolo di compensazione conicità getto: 01/02/2023 ver 2.5b1
+   Private m_dAngComp As Double = 0
+   Public Property dAngComp As Double
+      Get
+         Return m_dAngComp
+      End Get
+      Set(value As Double)
+         m_dAngComp = value
+      End Set
+   End Property
+
    Public ReadOnly Property ParamLstBx_Width As Double
       Get
          Return m_refWaterPageV.ParamsGpBx.ActualWidth - 20

Machine/WaterjetDbWindowVM.vb

@@ -0,0 +1,61 @@
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib5
+Imports EgtWPFLib
+
+' nuova libreria EgtWPFLib5 ver 2.4g1
+Public Class WaterjetDbWindowVM_OmagCUT
+   Inherits EgtWPFLib5.WaterjetDbWindowVM
+
+   Public Function CloseWaterjetDb_OmagCut(MainWindow As Window) As SaveWndBtnEnum
+      If bIsModified Then
+         Dim SaveWjDbWnd As New EgtMsgBox(MainWindow, "", EgtMsg(31759), EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL)
+         Select Case SaveWjDbWnd.m_nPressedBtn
+            Case 1   ' Yes
+               WriteWaterjetDb()
+               bIsModified = False
+               Return SaveWndBtnEnum.YES
+            Case 2   ' No
+               Return SaveWndBtnEnum.NO
+            Case Else   ' Cancel
+               Return SaveWndBtnEnum.CANCEL
+         End Select
+      Else
+         Dim bExitFor As Boolean = False
+         For Each Material As EgtWPFLib5.WjMaterial In MaterialList
+            If Not IsNothing(Material.SubMaterialList) Then
+               For Each SubMaterial As EgtWPFLib5.WjSubMaterial In Material.SubMaterialList
+                  If Not IsNothing(SubMaterial.ParamList) Then
+                     For Each QParam As EgtWPFLib5.WjParam In SubMaterial.ParamList
+                        bExitFor = QParam.IsModified()
+                        If bExitFor Then Exit For
+                     Next
+                  End If
+                  If bExitFor Then Exit For
+               Next
+            End If
+            If bExitFor Then Exit For
+         Next
+         If bExitFor Then
+            Dim SaveWjDbWnd As New EgtMsgBox(MainWindow, "", EgtMsg(31759), EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL)
+            Select Case SaveWjDbWnd.m_nPressedBtn
+               Case 1   ' Yes
+                  WriteWaterjetDb()
+                  bIsModified = False
+                  Return SaveWndBtnEnum.YES
+               Case 2   ' No
+                  Return SaveWndBtnEnum.NO
+               Case Else   ' Cancel
+                  Return SaveWndBtnEnum.CANCEL
+            End Select
+         End If
+      End If
+      Return SaveWndBtnEnum.YES
+   End Function
+
+   Sub New(sMachDir As String)
+      MyBase.New(sMachDir)
+   End Sub
+
+End Class

MainWindow.xaml

@@ -53,7 +53,7 @@
             </ToggleButton>
          </Grid>
 
-         <Button Grid.Column="2" Style="{DynamicResource OmagCut_BlueIconButton}" Click="ExitBtn_Click">
+         <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_BlueIconButton}" Click="ExitBtn_Click">
             <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
    

MainWindow.xaml.vb

@@ -2,6 +2,7 @@
 Imports System.Collections.ObjectModel
 Imports EgtUILib
 Imports EgtWPFLib
+Imports EgtPHOTOLib
 Imports System.ComponentModel
 Imports System.Threading
 Imports System.Windows.Threading
@@ -37,6 +38,8 @@ Class MainWindow
    Friend m_MachinePageUC As MachinePageUC
    Friend m_OptionsPageUC As OptionsPageUC
 
+   Friend m_IsClosingApplication As Integer = 0
+
    ' Dichiarazione variabili direttori
    Private m_sExeRoot As String = String.Empty
    Private m_sDataRoot As String = String.Empty
@@ -97,6 +100,7 @@ Class MainWindow
       OFFICE_TYPE = 2 ^ 19                '  524288
       REGISTRATION = 2 ^ 20               ' 1048576
       SIMPLESTATISTICS = 2 ^ 21           ' 2097152
+      COMPOFRAME = 2 ^ 22                 ' 4194304
    End Enum
    ' Opzione nesting automatico
    Private m_bAutoNest As Boolean = False
@@ -302,7 +306,7 @@ Class MainWindow
       GetPrivateProfileString(S_MACH, K_CURRMACH, "", m_sCurrMachine, m_sIniFile)
       ' Impostazione path MachIni file
       m_sMachIniFile = m_sMachinesRoot & "\" & m_sCurrMachine & "\" & m_sCurrMachine & ".ini"
-      ' Impostazione path KitIni file
+      ' Impostazione path Kit file
       m_sKitsFile = m_sMachinesRoot & "\" & m_sCurrMachine & "\" & MACHININGS_DIR & "\" & KITS_FILE
       ' Imposto tipo di chiave
 #If TRIAL Then
@@ -320,11 +324,13 @@ Class MainWindow
       Dim sNestKey As String = ""
       EgtUILib.GetPrivateProfileString(S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
       EgtSetNestKey(sNestKey)
+      Dim bNetHwKey As Boolean = ( GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
+      EgtSetNetHwKey( bNetHwKey)
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2404, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2404, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2506, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2506, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -498,6 +504,64 @@ Class MainWindow
       AddHandler m_ProdLineTimer.Tick, AddressOf OnProdLine
       ' Imposto riferimento a funzione delle textbox che disattiva scene in libreria
       EgtWPFLib.EgtTextBox.m_refScenesIsEnabled = AddressOf IsEnabledScenes
+
+      ' --------------------------------- SLAB DB -------------------------------------------------------
+      If GetPrivateProfileInt(S_SCRAPS, K_ENABLESCRAPS, 0, GetIniFile()) <> 0 Then
+         ' leggo il direttorio in cui cercare il database delle lastre
+         Dim PhotDir As String = String.Empty
+         GetPrivateProfileString(S_SCRAPS, K_PHOTODIR, "", PhotDir, GetIniFile())
+         ' verifico che esista il file "OmagPHOTOVb.sqlite" nel direttorio inidicato
+         If System.IO.File.Exists(PhotDir.Trim & "\" & DB_FILENAME) Then
+
+            If Not ManageDb.ConnectToDb(PhotDir.Trim & "\" & DB_FILENAME) Then
+               EgtOutLog("Error connecting to DB: " & PhotDir.Trim & "\" & DB_FILENAME)
+               ' coumico che il grezzo contiene un pezzo e quindi non può essere definito come grezzo
+               m_CurrentProjectPageUC.ClearMessage()
+               m_CurrentProjectPageUC.SetErrorMessage("Denied connection SlabDB")
+            Else
+               ' Impostazione direttorio per backup
+               Dim BackUpDir As String = m_sDataRoot & "\BackUp"
+               Directory.CreateDirectory(BackUpDir)
+               EgtPHOTOLib.MainData.SetConfigDir(m_sConfigDir)
+               EgtPHOTOLib.MainData.SetKeyLevel(m_nKeyLevel)
+               EgtPHOTOLib.MainData.SetKeyOptions(CInt(m_nKeyOptions))
+               EgtPHOTOLib.MainData.SetPhotoDir(PhotDir)
+               EgtPHOTOLib.MainData.SetBackUpDir(BackUpDir)
+               EgtPHOTOLib.MainData.SetIsOMagCUT(True)
+               Dim sLastBlock As String = String.Empty
+               GetPrivateProfileString(S_SCRAPS, K_LASTBLOCK, "", sLastBlock, GetIniFile())
+               If Not String.IsNullOrEmpty(sLastBlock) Then
+                  EgtPHOTOLib.MainData.SetLastBlock(sLastBlock)
+               End If
+
+               If GetPrivateProfileInt(S_SCRAPS, K_ENABLE_PRINTER, 0, GetIniFile()) = 1 Then
+                  ' leggo nome file prn (per stampante zebra)
+                  Dim m_TemplateFilePrinter As String = String.Empty
+                  GetPrivateProfileString(S_SCRAPS, K_TEMPLATE, m_sDataRoot & "\Label\Default.prn", m_TemplateFilePrinter, GetIniFile())
+                  ' leggo nome del direttorio in cui scrivere il file ini (per stampante zebra) -- solo se si desidera scrivere il file in un direttorio diverso
+                  Dim m_DatFilePrinter As String = String.Empty
+                  GetPrivateProfileString(S_SCRAPS, K_DAT, m_sDataRoot & "\Temp", m_DatFilePrinter, GetIniFile())
+                  ' leggo nome file exe (per stampante zebra)
+                  Dim m_ZebraUtilitiesExe As String = String.Empty
+                  GetPrivateProfileString(S_SCRAPS, K_ZEBRAUTILITIES, System.AppDomain.CurrentDomain.BaseDirectory & "ZebraPrinterUtilitiesR32.exe", m_ZebraUtilitiesExe, GetIniFile())
+                  EgtPHOTOLib.MainData.SetTemplateFilePrinter(m_TemplateFilePrinter)
+                  EgtPHOTOLib.MainData.SetDataFilePrinter(m_DatFilePrinter)
+                  EgtPHOTOLib.MainData.SetZebraPrinterExe(m_ZebraUtilitiesExe)
+                  EgtPHOTOLib.MainData.SetPrinterVisibility(True)
+               Else
+                  EgtPHOTOLib.MainData.SetPrinterVisibility(False)
+               End If
+
+               ' è permessa una sola istanza alla volta del programma OmagCUT -> "(1)" : "(" & nIstance.ToString & ")"
+               EgtPHOTOLib.MainData.SetUser(Environment.MachineName & "\" & Environment.UserName & " (1)")
+                  Dim sIdKey As String = String.Empty
+                  EgtGetKeyInfo(sIdKey)
+                  EgtPHOTOLib.MainData.SetKey(sIdKey)
+               End If
+            End If
+      End If
+      ' --------------------------------- SLAB DB -------------------------------------------------------
+      ExitBtn.ToolTip = "Exit" & vbCrLf & "Minimize (Shift)"
    End Sub
 
    Private Sub ManageSingleIstance()
@@ -546,6 +610,16 @@ Class MainWindow
       m_WorkInProgressPageUC.Prepare()
       m_WorkInProgressPageUC.UpdateTools()
 
+      Dim sVal As String = String.Empty
+      If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, m_CurrentMachine.dFsevLength)
+         m_CurrentMachine.SetFsevLength(m_CurrentMachine.dFsevLength)
+      End If
+      If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, m_CurrentMachine.dFsevPerc)
+         m_CurrentMachine.SetFsevPerc(m_CurrentMachine.dFsevPerc)
+      End If
+
       ' Se macchina fotografica abilitata, ne inizializzo il gestore
 #If Not TRIAL Then
       If GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO) Then
@@ -571,6 +645,10 @@ Class MainWindow
       TestOff()
       ' disabilito DragRettangle
       DragRettangleOff()
+      ' disabilito SplitCurv
+      SplitCurvWJOff()
+      ' disattivo StartCurv
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = True
@@ -619,6 +697,8 @@ Class MainWindow
             MainWindowGrid.Children.Remove(m_OptionsPageUC)
             MainWindowGrid.Children.Add(m_WorkInProgressPageUC)
             m_ActivePage = Pages.WorkInProgress
+         Case Else
+            WorkInProgressBtn.IsChecked = False
       End Select
    End Sub
 
@@ -628,6 +708,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -675,6 +757,8 @@ Class MainWindow
             MainWindowGrid.Children.Add(m_CurrentProjectPageUC)
             m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_DirectCutPageUC)
             m_ActivePage = Pages.DirectCut
+         Case Else
+            WorkInProgressBtn.IsChecked = False
       End Select
    End Sub
 
@@ -682,6 +766,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -728,6 +814,8 @@ Class MainWindow
             MainWindowGrid.Children.Add(m_CurrentProjectPageUC)
             m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_CadCutPageUC)
             m_ActivePage = Pages.CadCut
+         Case Else
+            CadCutBtn.IsChecked = False
       End Select
    End Sub
 
@@ -735,6 +823,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -782,6 +872,8 @@ Class MainWindow
             MainWindowGrid.Children.Add(m_CurrentProjectPageUC)
             m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_FrameCutPageUC)
             m_ActivePage = Pages.FrameCut
+         Case Else
+            If FrameCutBtn.IsEnabled Then FrameCutBtn.IsChecked = False
       End Select
    End Sub
 
@@ -789,6 +881,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -831,6 +925,8 @@ Class MainWindow
             MainWindowGrid.Children.Remove(m_OptionsPageUC)
             MainWindowGrid.Children.Add(m_MachinePageUC)
             m_ActivePage = Pages.Machine
+         Case Else
+            MachineBtn.IsChecked = False
       End Select
    End Sub
 
@@ -838,6 +934,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
       DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -885,7 +983,7 @@ Class MainWindow
             MainWindowGrid.Children.Add(m_OptionsPageUC)
             m_ActivePage = Pages.Options
          Case Pages.Options
-            OptionsBtn.IsChecked = True
+            OptionsBtn.IsChecked = False
       End Select
    End Sub
 
@@ -990,6 +1088,19 @@ Class MainWindow
          m_CurrentProjectPageUC.SaveNamedProject()
          m_CurrentProjectPageUC.SaveProject()
       End If
+      ' Inizio la chiusura del programma (verifico di aver terminato il processo DripFeed)
+      EgtOutLog("Iniziato processo di chiusura programma")
+      m_IsClosingApplication = 1
+      Dim nCount As Integer = 0
+      While m_IsClosingApplication <> 2
+         If nCount > 5 Then
+            Exit While
+         End If
+         ' verifico che il processo DripFeed sia terminato
+         EgtOutLog("Stato chiusura programma: " & m_IsClosingApplication.ToString)
+         Thread.Sleep(100)
+         nCount += 1
+      End While
       ' Uscita
       MainWindowExit()
    End Sub
@@ -1031,19 +1142,21 @@ Class MainWindow
       ' Se non sono in tagli diretti tutto ok
       If m_ActivePage <> Pages.DirectCut Then Return True
       ' Concludo le attività in corso
-      Select Case m_DirectCutPageUC.m_ActiveDirectCutPage
-         Case DirectCutPageUC.DirectCutPages.SingleCut
-            m_DirectCutPageUC.m_SingleCut.SingleCut_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.MultipleCut
-            m_DirectCutPageUC.m_MultipleCut.MultipleCut_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.GridCut
-            m_DirectCutPageUC.m_GridCut.GridCut_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.CopyTemplate
-            m_DirectCutPageUC.m_CopyTemplate.CopyTemplate_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.FlatteningCut
-            m_DirectCutPageUC.m_FlatteningCut.FlatteningCut_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.SawTest
-            m_DirectCutPageUC.m_SawTest.SawTest_Unloaded(sender, e)
+      Select Case m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage
+         Case ControlsDirectCutUC.DirectCutPages.SingleCut
+            m_DirectCutPageUC.m_ControlsDirectCutUC.m_SingleCut.SingleCut_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.MultipleCut
+            m_DirectCutPageUC.m_ControlsDirectCutUC.m_MultipleCut.MultipleCut_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.GridCut
+            m_DirectCutPageUC.m_ControlsDirectCutUC.m_GridCut.GridCut_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.FlatteningCut
+            m_DirectCutPageUC.m_ControlsDirectCutUC.m_FlatteningCut.FlatteningCut_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.CopyTemplate
+            m_DirectCutPageUC.m_ControlsDirectCutUC1.m_CopyTemplate.CopyTemplate_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.Polishing
+            m_DirectCutPageUC.m_ControlsDirectCutUC1.m_Polishing.Polishing_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.SawTest
+            m_DirectCutPageUC.m_ControlsDirectCutUC1.m_SawTest.SawTest_Unloaded(sender, e)
       End Select
       Return True
    End Function
@@ -1078,10 +1191,10 @@ Class MainWindow
          Case MachinePageUC.MachinePages.WaterJet
             ' Verifica ed eventuale salvataggio Db Waterjet
             Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
-            Dim nPressedBtn As Integer = DirectCast(m_MachinePageUC.m_WaterJetPageUC.DataContext, EgtWPFLib5.WaterjetDbWindowVM).CloseWaterjetDb_OmagCut(m_MainWindow)
-            If nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.CANCEL Then
+            Dim nPressedBtn As Integer = DirectCast(m_MachinePageUC.m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
                Return False
-            ElseIf nPressedBtn = EgtWPFLib5.WaterjetDbWindowVM.SaveWndBtnEnum.NO Then
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
                m_MachinePageUC.m_WaterJetPageUC.WaterJetPage_Reinitialize()
             End If
       End Select
@@ -1114,7 +1227,8 @@ Class MainWindow
          m_ProdLineTimer.Interval = TimeSpan.FromMilliseconds(2000)
          m_ProdLineTimer.Start()
       End If
-
+      ' di default attivo la pagina CadCut
+      m_ActivePage = MainWindow.Pages.CadCut
       ' seleziono il tipo di avvio
       m_CurrentProjectPageUC.StartProgram()
       ' aggiorno la grafica
@@ -1144,10 +1258,15 @@ Class MainWindow
    Private Sub OnIdle()
       ' Recupero il tipo di progetto
       Dim nPrjType As Integer = m_CurrentProjectPageUC.GetCurrentProjectType()
+      ' Verifico presenza testa H1 per lama/fresa (nel contesto principale)
+      Dim nCurrCtx As Integer = EgtGetCurrentContext()
+      EgtSetCurrentContext(m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      Dim bHeadH1 As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      EgtSetCurrentContext(nCurrCtx)
       ' Aggiorno interfaccia
       CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
-      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso (EgtGetHeadId("H1") <> GDB_ID.NULL)
-      ' DirectCutBtn.IsEnabled = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      ' DirectCutBtn.IsEnabled = bHeadH1
    End Sub
 
    ' Nomi dei file per OmagVIEW
@@ -1806,7 +1925,9 @@ Class MainWindow
          m_CurrentProjectPageUC.SetInfoMessage(EgtMsg(90327))        'Inseriti Nuovi Pezzi Rovinati
          Dim nPartId As Integer = EgtGetLastPart()
          For nI As Integer = 1 To nRuPartsCnt
-            EgtRemoveInfo( nPartId, INFO_PARTOK)
+            EgtRemoveInfo(nPartId, INFO_PARTOK)
+            ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+            m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
             m_CadCutPageUC.m_NestPage.StoreOnePart(nPartId, True)
             nPartId = EgtGetPrevPart(nPartId)
          Next
@@ -1905,4 +2026,17 @@ Class MainWindow
 
    End Sub
 
+   Public Sub SplitCurvWJOff()
+      m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedSplitCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetSplitCurvWJParam()
+
+   End Sub
+
+   Public Sub StartCurvWJOff()
+      m_CadCutPageUC.m_NestPage.StartCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedStartCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetStartCurvWJParam()
+   End Sub
+
 End Class

My Project/AssemblyInfo.vb

@@ -20,9 +20,9 @@ Imports System.Windows
 <Assembly: AssemblyTitle("OmagCUTR32.exe")>
 <Assembly: AssemblyDescription("OmagCUT 32 bit")>
 #End If
-<Assembly: AssemblyCompany("EgalTech s.r.l.")>
+<Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("OmagCUT")>
-<Assembly: AssemblyCopyright("Copyright ©  2015-2022 by EgalTech s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2015-2023 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(False)>
 
@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.4.1")>
-<Assembly: AssemblyFileVersion("2.4.4.1")>
+<Assembly: AssemblyVersion("2.5.6.2")>
+<Assembly: AssemblyFileVersion("2.5.6.2")>

NcComm/CNCommunication.vb

@@ -2,6 +2,8 @@
 Imports System.Globalization
 Imports System.Collections.ObjectModel
 Imports EgtUILib
+Imports System.IO
+Imports System.Text
 
 Public Class CNCommunication
 
@@ -31,6 +33,7 @@ Public Class CNCommunication
    Private m_bNewDeltaData As Boolean = True
    Private m_bNewVarData As Boolean = False
    Private m_bTimerBusy As Boolean = False
+   Private m_bTimerAxesBusy As Boolean = False
 
    Private m_IsNewConsole As Boolean = False
 
@@ -39,6 +42,7 @@ Public Class CNCommunication
 
    ' Timer
    Private m_RefreshTimer As New DispatcherTimer
+   Private m_RefreshAxesFanuc As New DispatcherTimer
 
    ' Nomi e indici degli assi macchina
    Private m_bAxesOk As Boolean = False
@@ -101,6 +105,12 @@ Public Class CNCommunication
          m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(100)
          m_RefreshTimer.Start()
       End If
+      ' solo per controllo FANUC creo un timer apposito solo per la lettura degli assi
+      If m_nNCType = 4 Then
+         AddHandler m_RefreshAxesFanuc.Tick, AddressOf RefreshAxesFanucTimer_tick
+         m_RefreshAxesFanuc.Interval = TimeSpan.FromMilliseconds(50)
+         m_RefreshAxesFanuc.Start()
+      End If
 
       ' Leggo dati sugli assi della macchina
       ReadAxesData()
@@ -117,10 +127,16 @@ Public Class CNCommunication
 
          If m_nNCType = 3 Then
             RefreshNoEvents()
+         ElseIf m_nNCType = 4 Then
+            RefreshFANUC()
          Else
             Refresh()
          End If
 
+         If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sClickState) Then
+            ClickOnPolishLine()
+         End If
+
          m_bTimerBusy = False
          m_RefreshTimer.Start()
       Else
@@ -129,8 +145,22 @@ Public Class CNCommunication
 
    End Sub
 
+   Private Sub RefreshAxesFanucTimer_tick()
+      If Not m_bTimerAxesBusy Then
+         m_bTimerAxesBusy = True
+         m_RefreshAxesFanuc.Stop()
+
+         RefreshAxesFANUC()
+
+         m_bTimerAxesBusy = False
+         m_RefreshAxesFanuc.Start()
+      Else
+         Dim nDummy As Integer = 10
+      End If
+   End Sub
+
    Private Sub ReadAxesData()
-      ' Nomi e indici degli assi macchina
+      ' Nomi e indici degli assi macchina: definisco il nome degli assi da satampare nella pagina MachineStatusUC
       m_bAxesOk = True
       GetPrivateProfileString(S_AXES, K_L1NAME, "X", m_sA1, m_MainWindow.GetMachIniFile())
       m_nA1 = GetPrivateProfileInt(S_AXES, K_L1ID, 0, m_MainWindow.GetMachIniFile())
@@ -222,6 +252,11 @@ Public Class CNCommunication
                m_CN = New Num.NumNC
             Case 3
                m_CN = New CN_Siemens
+            Case 4
+               ' Fanuc
+               m_CN = New Fanuc.Fanuc
+               ' proveddo a sovrscrivere i datti di comunicazione PC-NC settati di default nella classe CN_Generico
+               m_MainWindow.m_CurrentMachine.InitFANUC(m_CN)
          End Select
          ' Recupero la stringa di inizializzazione della comunicazione
 
@@ -354,8 +389,13 @@ Public Class CNCommunication
             If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.Remote, sVal)
          End If
 
-            ' Inizializzo la comunicazione
-            m_CN.Init()
+         ' Solo per controllo FANUNC
+         GetPrivateProfileString(S_NCDATA, K_NAXES, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.nAxes, sVal)
+
+
+         ' Inizializzo la comunicazione
+         m_CN.Init()
 
       Catch ex As Exception
          ' set status to statusbar
@@ -418,6 +458,17 @@ Public Class CNCommunication
                   m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Red")
                End Try
             End If
+         Case 4
+            If IsNothing(m_CN) OrElse m_CN.n_state < 2 Then
+               ' Per evitare crash con azioni verso il controllo, avvio quello di debug
+               m_nNCType = 0
+               Me.m_CN = New CN_Debug
+               m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Red")
+            Else
+               ' ATTENZIONE: durante l'inizializzazione della classe il vettore che contiene tutti gli indirizzi di memoria non è caricato
+               m_CN.b_axis_events_enable = True
+               m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_DarkGray")
+            End If
       End Select
 
       ' Assegno riferimento al CN alle diverse pagine
@@ -452,6 +503,31 @@ Public Class CNCommunication
 
    End Sub
 
+   Private Sub ClickOnPolishLine()
+      ' Se richiesto di scattare foto sulla linea di lucidatura
+      m_CN.n_DReadELS_handle = 0
+      m_CN.ReadEls_Add_Parameter(m_MainWindow.m_CurrentMachine.sClickState, 1)
+      Dim nClickState As Integer = 0
+      For I As Integer = 0 To 10
+         System.Threading.Thread.Sleep(50)
+         If m_CN.n_DReadELS_handle = 1 Then
+            nClickState = CInt(m_CN.d_DReadELS_value)
+            If nClickState = 1 Then
+               ' procedo a costruire un nuovo file nella cartella indicata in configurazione
+               Try
+                  File.Create(m_MainWindow.m_CurrentMachine.sClickDir & "\NewClick.txt")
+                  ' Dichiaro di aver provveduto a comunicare di scattare la foto
+                  m_CN.DVariables_WriteVariables2(m_MainWindow.m_CurrentMachine.sClickState, "0")
+               Catch ex As Exception
+                  EgtOutLog("Error on PolishLine comunication: " & ex.ToString)
+               End Try
+            End If
+            Exit For
+         End If
+      Next
+
+   End Sub
+
    Private Sub Refresh()
 
       If m_bNewPosData Then
@@ -464,6 +540,7 @@ Public Class CNCommunication
          m_MachineStatus.DisplayPositionDelta()
       End If
 
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
       If m_CN.b_feed_changed Then
          m_CN.b_feed_changed = False
          m_MachineStatus.DisplayFeed()
@@ -490,12 +567,14 @@ Public Class CNCommunication
          'FrmMain.LblToolRad.Text = cn.Tools(0).radius.ToString
          'FrmMain.LblToolComp.Text = cn.Tools(0).comp_num.ToString
       End If
+      ' ----- FINE : lettura diretta di specifiche vaiabili -----
 
       Select Case m_nNCType
          Case 1
             If m_CN.read_active_mode() <> m_nCurrMode Then
                m_nCurrMode = m_CN.read_active_mode()
                m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+               m_CN.nMachineMode = m_nCurrMode
             End If
          Case 2
             If m_CN.nMachineMode <> m_nCurrMode Then
@@ -530,6 +609,7 @@ Public Class CNCommunication
          'End If
       End If
 
+      ' QUESTE VARIABILI NON SONO LETTE IN QUANTO NON SONO STATE CARICATE → vedere come esempio il NUM che assegna queste variabili
       ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
       If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
          If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
@@ -568,8 +648,14 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.CloseAllChanged(m_CN.bCloseAllState)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open123Changed(m_CN.bOpen123State)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open456Changed(m_CN.bOpen456State)
-            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
-            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            ' in assenza della configurazione delle variabili Close123 e Close456
+            If Not String.IsNullOrEmpty(m_CN.m_szCnDataVar(CN_generico.CnData.Close123State)) Then
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(Not m_CN.bOpen123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(Not m_CN.bOpen456State)
+            End If
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BlowChanged(m_CN.bBlowState)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOnChanged(m_CN.bVacuumOn)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOffChanged(m_CN.bVacuumOff)
@@ -581,6 +667,180 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.ZCJogChanged(m_CN.bZCJog)
                m_MainWindow.m_DirectCutPageUC.ZBJogChanged(m_CN.bZBCJog)
                m_MainWindow.m_DirectCutPageUC.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
+            End If
+         Else
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserTracStateChanged(m_CN.bLaserTracState)
+            If m_CN.Is_G24_active() Then
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(False)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(True)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(False)
+            End If
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.HomeStateChanged(m_CN.bHomeState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
+
+            ' Nuovi bottoni (uso joystick) per Area4
+            If m_IsNewConsole Then
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.XYJogChanged(m_CN.bXYJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
+            End If
+
+         End If
+      End If
+
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.RawPart Then
+         m_MainWindow.m_RawPartPage.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+      End If
+
+      ' Nuove bottoni (Power Macchina)
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         If m_IsNewConsole Then
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+         End If
+         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+      End If
+
+
+
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.WorkInProgress Then
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.LaserTracStateChanged(m_CN.bLaserTracState)
+         If m_CN.Is_G24_active() Then
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ThreeAxisStateChanged(False)
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.FiveAxisStateChanged(True)
+         Else
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.FiveAxisStateChanged(False)
+         End If
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
+      End If
+
+   End Sub
+
+   Private Sub RefreshAxesFANUC()
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
+      ' avvio lettura variabili da CN
+      m_CN.Geppo()
+      ' notifico valori all'interfaccia
+      m_MachineStatus.DisplayPosition()
+      m_MachineStatus.DisplayPositionDelta()
+      m_MachineStatus.DisplayFeed()
+      m_MachineStatus.DisplaySpeed()
+      m_MachineStatus.DisplayPower()
+   End Sub
+
+   Private Sub RefreshFANUC()
+      ' Copia della funzione Refresh
+
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
+      '' avvio lettura variabili da CN
+      'm_CN.Geppo()
+      '' notifico valori all'interfaccia
+      'm_MachineStatus.DisplayPosition()
+      'm_MachineStatus.DisplayPositionDelta()
+      'm_MachineStatus.DisplayFeed()
+      'm_MachineStatus.DisplaySpeed()
+      'm_MachineStatus.DisplayPower()
+      ' eventualmente carico messaggi di errore
+      ErrorList.Clear()
+      If m_CN.b_NC_error Then
+         ErrorList.Clear()
+         SyncLock m_CN
+            For Each Item As String In m_CN.sz_NC_error_messages
+               ErrorList.Add(Item)
+            Next
+         End SyncLock
+      End If
+      m_AlarmsPage.NcError()
+      ' ----- FINE  : lettura diretta di specifiche vaiabili -----
+
+      If m_CN.read_active_mode() <> CShort(m_nCurrMode) Then
+         m_nCurrMode = CInt(m_CN.read_active_mode())
+         m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+         m_CN.nMachineMode = m_nCurrMode
+      End If
+
+      ' QUESTE VARIABILI NON SONO LETTE IN QUANTO NON SONO STATE CARICATE → vedere come esempio il NUM che assegna queste variabili
+      ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
+         If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.SpindleStateChanged(m_CN.bSpindleState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LaserStateChanged(m_CN.bLaserState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LaserTracStateChanged(m_CN.bLaserTracState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.CoolantStateChanged(m_CN.bCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.InternalCoolantStateChanged(m_CN.bInternalCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ExternCoolantStateChanged(m_CN.bExternCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.CBAxesStateChanged(m_CN.bCBAxesState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.AirBlowStateChanged(m_CN.bAirBlowState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.HomeStateChanged(m_CN.bHomeState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.TableDownChanged(m_CN.bTableDownState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.DoorClosedChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LimitZChanged(m_CN.bLimitZState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.FiveAxisStateChanged(m_CN.Is_G24_active())
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ParkingStateChanged(m_CN.bParkingState)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ZoneStateChanged(m_CN.nEnableZone)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.PcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumUpChanged(m_CN.bVacuumUp)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumDownChanged(m_CN.bVacuumDown)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2UpChanged(m_CN.bVacuum2Up)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2DownChanged(m_CN.bVacuum2Down)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum0Changed(m_CN.bVacuum0)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum90Changed(m_CN.bVacuum90)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum1Changed(m_CN.bVacuum1State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2Changed(m_CN.bVacuum2State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum3Changed(m_CN.bVacuum3State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum4Changed(m_CN.bVacuum4State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum5Changed(m_CN.bVacuum5State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum6Changed(m_CN.bVacuum6State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum135Changed(m_CN.bVacuum135State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum246Changed(m_CN.bVacuum246State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.OpenAllChanged(m_CN.bOpenAllState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.CloseAllChanged(m_CN.bCloseAllState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open123Changed(m_CN.bOpen123State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open456Changed(m_CN.bOpen456State)
+            ' in assenza della configurazione delle variabili Close123 e Close456
+            If Not String.IsNullOrEmpty(m_CN.m_szCnDataVar(CN_generico.CnData.Close123State)) Then
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(Not m_CN.bOpen123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(Not m_CN.bOpen456State)
+            End If
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BlowChanged(m_CN.bBlowState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOnChanged(m_CN.bVacuumOn)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOffChanged(m_CN.bVacuumOff)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BypassChanged(m_CN.bBypassState)
+
+            ' Nuovi bottoni (uso joystick)
+            If m_IsNewConsole Then
+               m_MainWindow.m_DirectCutPageUC.XYJogChanged(m_CN.bXYJog)
+               m_MainWindow.m_DirectCutPageUC.ZCJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.ZBJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
             End If
          Else
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
@@ -607,6 +867,7 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZJogChanged(m_CN.bZCJog)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCJogChanged(m_CN.bZBCJog)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
             End If
 
          End If
@@ -617,11 +878,17 @@ Public Class CNCommunication
       End If
 
       ' Nuove bottoni (Power Macchina)
-      If m_IsNewConsole AndAlso m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
-         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
-         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         If m_IsNewConsole Then
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+         End If
+         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
       End If
 
+
+
       If m_MainWindow.m_ActivePage = MainWindow.Pages.WorkInProgress Then
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
@@ -904,28 +1171,84 @@ Public Class CNCommunication
          End If
          ' Se richiesta successiva attivazione, faccio reset
          If bActivate Then
+            EgtOutLog("Call function: DGeneralFunctions_Reset")
+            TimeSpanInit()
             m_CN.DGeneralFunctions_Reset()
+            EgtOutLog(TimeSpanEnd())
          End If
          ' Attesa opportuna
          System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nResetSendDelay)
          If m_nNCType = 1 Then
             ' Cancellazione eventuale file già presente con lo stesso nome (ignoro eventuale errore)
+            EgtOutLog("Delete_NC_prog(sNumProg)")
+            TimeSpanInit()
             m_CN.Delete_NC_prog(sNumProg)
+            EgtOutLog(TimeSpanEnd())
             ' Attesa opportuna
             System.Threading.Thread.Sleep(100)
+         ElseIf m_nNCType = 4 Then
+            ' FANUC: imposto modalità EDIT 
+            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(1) = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
          End If
+         EgtOutLog("Download_NC_prog(sCncPath, sNumProg)")
+         ' -------------- START DOWNLOAD -------------- 
+         TimeSpanInit()
          bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
          ' Attesa opportuna
          System.Threading.Thread.Sleep(100)
+         ' FANUC: genero un file 901 vuoto da aspedire, attivare; poi rispedisco il file 900
+         If m_nNCType = 4 And Not bOk Then
+            bOk = True
+            Dim sCncPath1 As String = m_MainWindow.GetCncDir() & "\PlaceHolder" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+            Dim fs As FileStream = File.Create(sCncPath1)
+            ' Add text to the file.
+            Dim info As Byte() = New UTF8Encoding(True).GetBytes(vbLf & "(PlaceHolder)")
+            fs.Write(info, 0, info.Length)
+            fs.Close()
+            bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath1, "901") = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+            If bActivate Then
+               bOk = bOk AndAlso (m_CN.ActivateProgram("901") = 0)
+               ' Attesa opportuna
+               System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+            End If
+            ' riprovo ad eseguire il programma 900
+            bOk = True
+            bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+         End If
+         EgtOutLog("Nc Type : " & m_nNCType.ToString)
+         ' AXIUM (NUM OLD): se DripFeed non esegluo attivazione programma)
+         If m_nNCType = 1 AndAlso m_CN.bIsDripFeed Then
+            ' eventauli cambi di stato sono trattati all'interno della funzione DownLoad_NC_prog
+            Return True
+         End If
+         EgtOutLog(TimeSpanEnd())
+         ' --------------  END  DOWNLOAD -------------- 
+         ' -------------- START ACTIVATE -------------- 
          ' Se richiesta attivazione
          If bActivate Then
             ' Attivazione programma
+            EgtOutLog("ActivateProgram(nNumProg)")
+            TimeSpanInit()
             bOk = bOk AndAlso (m_CN.ActivateProgram(nNumProg) = 0)
+            EgtOutLog(TimeSpanEnd())
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(100)
+            ' Attivo la modalità AUTO prima per preparar il cyclo start
+            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(0) = 0)
             ' Attesa opportuna
             System.Threading.Thread.Sleep(100)
             ' Modalità automatica
-            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(0) = 0)
+            EgtOutLog("DGeneralFunctions_WriteCncMode(0)")
+            TimeSpanInit()
+            EgtOutLog(TimeSpanEnd())
          End If
+         ' --------------  END  ACTIVATE -------------- 
          ' Messaggio con risultato
          If bOk Then
             m_CurrProjPage.SetInfoMessage(EgtMsg(90317))        'Programma CN trasmesso con successo

NcComm/CN_generico.vb

@@ -8,7 +8,7 @@ Public MustInherit Class CN_generico
    Public Const MAX_VAR As Short = 100
    Public Const MAX_VALUES As Short = 9           ' Max. index to read the data from the FXServer array
    Public Const MAX_TOOLS As Short = 100
-   Public Const NUM_DATA = 55                     ' Numero di dati del CN (Speed,Feed,...)
+   Public Const NUM_DATA = 56                     ' Numero di dati del CN (Speed,Feed,...)
 
    Public m_NewVariable As Boolean = False        ' per scrittura delle vairbaili Apllication del PLC
 
@@ -70,8 +70,18 @@ Public MustInherit Class CN_generico
       Parking = 52
       EnableZone = 53
       EnablePC = 54
+
+      nAxes = 55
    End Enum
 
+   Public Enum Type As Short
+      TBoolean = 0
+      TInteger = 1
+      TLong = 2
+      TDouble = 3
+      TString = 4
+
+   End Enum
 #End Region
 
 #Region " Struct"
@@ -218,10 +228,27 @@ Public MustInherit Class CN_generico
    Public bRemote As Boolean
    ' Nuovi di bottoni -------------------------------------------
 
+   ' solo per NumOld
+   Public bIsDripFeed As Boolean = False
+
+   ' usato nel FANUC per leggere lo stato macchina se 5 assi attivo
+   Public b5AxesActive As Boolean
+
    Public nMachineMode As Integer
 
    Public m_szCnDataVar(NUM_DATA - 1) As String
-
+   '
+   ' nuovi dal 29-III-2023 per Fanuc
+   '
+   Public n_Base_addr_int_vars As Integer = 59800
+   Public n_Base_addr_byte_for_bits_vars As Integer = 59820
+   Public n_num_var_int_to_read As Short = 10
+   Public n_num_var_byte_for_bits_to_read As Short = 30
+   Public s_addr_set_nc_mode As String = "D59825"
+   Public s_addr_feedhold As String = "D59850.6"
+   '
+   ' Eventi
+   '
    Public Event NewPositionData(ByVal sender As Object)
    Public Event NewPosDeltaData(ByVal sender As Object)
    Public Event NewVarChanged(ByVal sender As Object)
@@ -294,8 +321,8 @@ Public MustInherit Class CN_generico
 
    Public MustOverride Function DTool_set_read_range(n_start As Short, n_stop As Short) As Short
 
-   Public MustOverride Function DTool_write_tool(n_tool_number As Short, Length_X As Double, Radius As Double, TipRadius_Z As Double, _
-                                    DLength_X As Double, DTipRadius_Z As Double, _
+   Public MustOverride Function DTool_write_tool(n_tool_number As Short, Length_X As Double, Radius As Double, TipRadius_Z As Double,
+                                    DLength_X As Double, DTipRadius_Z As Double,
                                     nDirection As Short, nType As Short, nH As Integer) As Short
 
    Public Overridable Function SetProgramMainOrSub(bMain As Boolean) As Boolean
@@ -341,4 +368,36 @@ Public MustInherit Class CN_generico
 
 #End Region
 
+#Region " Nuovi metodi pubblici"
+
+   Public Overridable Function NC_read_var_short(VarAddr As String, ByRef value As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_read_var_short_range(VarStartAddr As String, VarEndAddr As String, ByRef values() As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_write_var_short(VarAddr As String, ByRef value As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_read_var_bit(VarAddr As String, ByRef value As Boolean) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_write_var_bit(VarAddr As String, ByRef value As Boolean) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_pulse_bit(VarAddr As String) As Boolean
+      Return False
+   End Function
+   Public Overridable Function Geppo() As Boolean
+      Return False
+   End Function
+
+#End Region
+
+
 End Class

NcComm/M_Num.vb

@@ -92,7 +92,7 @@ Namespace Num
       Private Const TIMEOUT As Short = 99
       Private Const SHORTSLEEPTIME As Short = 10
       Private Const LONGSLEEPTIME As Short = 40
-      Private Const SHORTSLEEPCOUNT As Short = 20
+      Private Const SHORTSLEEPCOUNT As Short = 100
       Private Const LONGSLEEPCOUNT As Short = 200
 
 #End Region

OmagCUT.vbproj

@@ -115,16 +115,20 @@
     <Reference Include="AxInterop.FXLib">
       <HintPath>..\..\EgtProg\OmagCUT\AxInterop.FXLib.dll</HintPath>
     </Reference>
+    <Reference Include="EgtPHOTOLib">
+      <HintPath>..\..\EgtProg\Dll32\EgtPHOTOLib.dll</HintPath>
+    </Reference>
     <Reference Include="EgtUILib, Version=2.3.4.5, Culture=neutral, processorArchitecture=MSIL">
       <SpecificVersion>False</SpecificVersion>
       <HintPath>..\..\EgtProg\DllD32\EgtUILib.dll</HintPath>
     </Reference>
-    <Reference Include="EgtWPFLib, Version=2.1.7.1, Culture=neutral, processorArchitecture=MSIL">
+    <Reference Include="EgtWPFLib, Version=2.5.2.2, Culture=neutral, processorArchitecture=MSIL">
       <SpecificVersion>False</SpecificVersion>
       <HintPath>..\..\EgtProg\Dll32\EgtWPFLib.dll</HintPath>
     </Reference>
-    <Reference Include="EgtWPFLib5">
-      <HintPath>..\..\EgtProg\OmagCUT\EgtWPFLib5.dll</HintPath>
+    <Reference Include="EgtWPFLib5, Version=2.5.2.2, Culture=neutral, processorArchitecture=MSIL">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\EgtProg\Dll32\EgtWPFLib5.dll</HintPath>
     </Reference>
     <Reference Include="Interop.FXLib">
       <HintPath>..\..\EgtProg\OmagCUT\Interop.FXLib.dll</HintPath>
@@ -143,6 +147,10 @@
     </Reference>
     <Reference Include="PresentationFramework.Aero" />
     <Reference Include="System.Core" />
+    <Reference Include="System.Data.SQLite, Version=1.0.112.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139, processorArchitecture=x86">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\EgtProg\Dll32\System.Data.SQLite.dll</HintPath>
+    </Reference>
     <Reference Include="System.Drawing" />
     <Reference Include="System.Windows.Forms" />
     <Reference Include="System.Xml.Linq" />
@@ -170,6 +178,12 @@
       <DependentUpon>SelectPartFromFamilyWD.xaml</DependentUpon>
     </Compile>
     <Compile Include="CAM\CamPolishing.vb" />
+    <Compile Include="DirectCuts\ControlsDirectCutUC.xaml.vb">
+      <DependentUpon>ControlsDirectCutUC.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="DirectCuts\ControlsDirectCutUC1.xaml.vb">
+      <DependentUpon>ControlsDirectCutUC1.xaml</DependentUpon>
+    </Compile>
     <Compile Include="DirectCuts\Polishing.xaml.vb">
       <DependentUpon>Polishing.xaml</DependentUpon>
     </Compile>
@@ -179,6 +193,9 @@
     <Compile Include="DirectCuts\SingleDrillUC.xaml.vb">
       <DependentUpon>SingleDrillUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="DirectCuts\SquaringUC.xaml.vb">
+      <DependentUpon>SquaringUC.xaml</DependentUpon>
+    </Compile>
     <Compile Include="DrawImport\AlzFrontUC.xaml.vb">
       <DependentUpon>AlzFrontUC.xaml</DependentUpon>
     </Compile>
@@ -205,16 +222,32 @@
     <Compile Include="Machine\ImportExportToolWD.xaml.vb">
       <DependentUpon>ImportExportToolWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="Machine\WaterjetDbWindowVM.vb" />
     <Compile Include="Machine\WaterJetPageVM.vb" />
     <Compile Include="Machine\WaterJetPageUC.xaml.vb">
       <DependentUpon>WaterJetPageUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="NcComm\fwlib32.vb" />
+    <Compile Include="NcComm\M_Fanuc.vb" />
+    <Compile Include="NcComm\M_Fanuc_hi.vb" />
+    <Compile Include="Project\AddToDataBaseUC.xaml.vb">
+      <DependentUpon>AddToDataBaseUC.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="Project\OmagPhotoWD.xaml.vb">
+      <DependentUpon>OmagPhotoWD.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="Project\ScrapsWD.xaml.vb">
+      <DependentUpon>ScrapsWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="Project\StartLauncheWD.xaml.vb">
       <DependentUpon>StartLauncheWD.xaml</DependentUpon>
     </Compile>
     <Compile Include="Project\CicloStartWD.xaml.vb">
       <DependentUpon>CicloStartWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="RawPhoto\OtherRefTabWD.xaml.vb">
+      <DependentUpon>OtherRefTabWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="RawPhoto\SlabIdWD.xaml.vb">
       <DependentUpon>SlabIdWD.xaml</DependentUpon>
     </Compile>
@@ -412,6 +445,14 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="DirectCuts\ControlsDirectCutUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="DirectCuts\ControlsDirectCutUC1.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DirectCuts\Polishing.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -424,6 +465,10 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="DirectCuts\SquaringUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DrawImport\AlzFrontUC.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
@@ -459,12 +504,28 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="Project\AddToDataBaseUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="Project\OmagPhotoWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="Project\ScrapsWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="Project\StartLauncheWD.xaml">
     </Page>
     <Page Include="Project\CicloStartWD.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="RawPhoto\OtherRefTabWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="RawPhoto\SlabIdWD.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -847,7 +908,7 @@
     <Resource Include="Resources\MachineStatusImage\Single.png" />
   </ItemGroup>
   <ItemGroup>
-    <Resource Include="Resources\ToolChangerPos.png" />
+    <Resource Include="Resources\ToolChangerPos_OLD.png" />
   </ItemGroup>
   <ItemGroup>
     <Resource Include="Resources\Manual.png" />
@@ -1249,6 +1310,36 @@
     <Resource Include="Resources\Spiral.png" />
     <Resource Include="Resources\NewIcons\Drag_Rettangle.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\GenerateCN.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\GenerateCN.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\SPLIT-WJ.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\START-WJ.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Ponticelli.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Ponticelli_delete.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Parking.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Quality.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\ToolChangerPos.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\RefTab.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDarkDictionary.xaml

@@ -32,6 +32,7 @@
     <BitmapImage x:Key="AlignPiecesImg" UriSource="Resources/NewIcons/ruota-oggetto-inclinato.png"></BitmapImage>
     <BitmapImage x:Key="BarCodeImg" UriSource="Resources/NewIcons/BarCode.png"></BitmapImage>
     <BitmapImage x:Key="SlabIdImg" UriSource="Resources/NewIcons/SlabId.png"></BitmapImage>
+    <BitmapImage x:Key="RefTabImg" UriSource="Resources/NewIcons/RefTab.png"></BitmapImage>
     <BitmapImage x:Key="BottomLeftImg" UriSource="Resources/NewIcons/1-BottomLeft.png"></BitmapImage>
     <BitmapImage x:Key="BottomRightImg" UriSource="Resources/NewIcons/2-BottomRight.png"></BitmapImage>
     <BitmapImage x:Key="PartRotOnImg" UriSource="Resources/NewIcons/PartRotOn.png"></BitmapImage>
@@ -46,6 +47,7 @@
     <BitmapImage x:Key="DownArrowImg" UriSource="Resources/NewIcons/DownArrow.png"></BitmapImage>
     <BitmapImage x:Key="DrawImg" UriSource="Resources/NewIcons/icone-tagli-3.png"></BitmapImage>
     <BitmapImage x:Key="FrameMachiningImg" UriSource="Resources/NewIcons/FrameMachining.png"></BitmapImage>
+    <BitmapImage x:Key="GenerateCNImg" UriSource="Resources/NewIcons/GenerateCN.png"></BitmapImage>
     <BitmapImage x:Key="GenericViewImg" UriSource="Resources/NewIcons/GenericView.png"></BitmapImage>
     <BitmapImage x:Key="HalfTurnRotateImg" UriSource="Resources/Negative/HalfTurnRotate.png"></BitmapImage>
     <BitmapImage x:Key="ImportImg" UriSource="Resources/NewIcons/icone-tagli-6.png"></BitmapImage>
@@ -106,6 +108,8 @@
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
+    <BitmapImage x:Key="StartWJImg" UriSource="Resources/NewIcons/START-WJ.png"></BitmapImage>
+    <BitmapImage x:Key="SplitWJImg" UriSource="Resources/NewIcons/SPLIT-WJ.png"></BitmapImage>
     
     <!--Machine-->
     <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>

OmagCUTDictionary.xaml

@@ -102,6 +102,7 @@
     <BitmapImage x:Key="AlignPiecesImg" UriSource="Resources/AlignPieces.png"></BitmapImage>
     <BitmapImage x:Key="BarCodeImg" UriSource="Resources/BarCode.png"></BitmapImage>
     <BitmapImage x:Key="SlabIdImg" UriSource="Resources/SlabId.png"></BitmapImage>
+    <BitmapImage x:Key="RefTabImg" UriSource="Resources/NewIcons/RefTab.png"></BitmapImage>
     <BitmapImage x:Key="BottomLeftImg" UriSource="Resources/BottomLeft.png"></BitmapImage>
     <BitmapImage x:Key="BottomRightImg" UriSource="Resources/BottomRight.png"></BitmapImage>
     <BitmapImage x:Key="PartRotOnImg" UriSource="Resources/PartRotOn.png"></BitmapImage>
@@ -116,6 +117,7 @@
     <BitmapImage x:Key="DownArrowImg" UriSource="Resources/DownArrow.png"></BitmapImage>
     <BitmapImage x:Key="DrawImg" UriSource="Resources/Draw.png"></BitmapImage>
     <BitmapImage x:Key="FrameMachiningImg" UriSource="Resources/FrameMachining.png"></BitmapImage>
+    <BitmapImage x:Key="GenerateCNImg" UriSource="Resources/GenerateCN.png"></BitmapImage>
     <BitmapImage x:Key="GenericViewImg" UriSource="Resources/GenericView.png"></BitmapImage>
     <BitmapImage x:Key="HalfTurnRotateImg" UriSource="Resources/HalfTurnRotate.png"></BitmapImage>
     <BitmapImage x:Key="ImportImg" UriSource="Resources/Import.png"></BitmapImage>
@@ -174,6 +176,8 @@
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
+    <BitmapImage x:Key="StartWJImg" UriSource="Resources/NewIcons/START-WJ.png"></BitmapImage>
+    <BitmapImage x:Key="SplitWJImg" UriSource="Resources/NewIcons/SPLIT-WJ.png"></BitmapImage>
 
     <!--Machine-->
     <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>
@@ -205,6 +209,7 @@
     <BitmapImage x:Key="XYJogImg" UriSource="Resources/NewIcons/XYJog.png"></BitmapImage>
     <BitmapImage x:Key="ZCJogImg" UriSource="Resources/NewIcons/ZCJog.png"></BitmapImage>
     <BitmapImage x:Key="ZBJogImg" UriSource="Resources/NewIcons/ZBJog.png"></BitmapImage>
+    <BitmapImage x:Key="ParkingImg" UriSource="Resources/NewIcons/Parking.png"></BitmapImage>
 
 
     <!--Frame-->
@@ -215,6 +220,9 @@
     <!--Machinig-->
     <BitmapImage x:Key="Allunga-AccorciaImg" UriSource="Resources/NewIcons/Allunga-o-accorcia.png"></BitmapImage>
     <BitmapImage x:Key="Inizio-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Inizio-allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="PonticelliWJImg" UriSource="Resources/NewIcons/Ponticelli.png"></BitmapImage>
+    <BitmapImage x:Key="PonticelliDeleteWJImg" UriSource="Resources/NewIcons/Ponticelli_delete.png"></BitmapImage>
+    <BitmapImage x:Key="QualityWJImg" UriSource="Resources/NewIcons/Quality.png"></BitmapImage>
     <BitmapImage x:Key="Fine-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Fine-allunga-o-accorcia.png"></BitmapImage>
     <BitmapImage x:Key="ON_OFF-singolo-taglioImg" UriSource="Resources/NewIcons/ON_OFF-singolo-taglio.png"></BitmapImage>
     <BitmapImage x:Key="Tutti-ONImg" UriSource="Resources/NewIcons/Tutti-ON.png"></BitmapImage>
@@ -1203,6 +1211,7 @@
 
    <Style x:Key="OmagCut_CalculatorTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
       <Setter Property="Keyboard" Value="Calculator"/>
+      <Setter Property="IsLength" Value="True"/>
       <Setter Property="KeyboardDimension" Value="300"/>
    </Style>
 

Options/OptionsPageUC.xaml

@@ -55,23 +55,43 @@
 
       </GroupBox>
 
+      <!--UNITA' DI MISURA-->
       <GroupBox Name="UnitsOfMeasureGpBx"
                 Grid.Column="1"
                 Grid.RowSpan="3"
                 Style="{DynamicResource OmagCut_GroupBox}">
-         <Grid >
+         <Grid Name ="UnitGrid">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="4*"/>
+               <ColumnDefinition Width="3.2*"/>
+               <ColumnDefinition Width="1.8*"/>
                <ColumnDefinition Width="0.5*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
                <RowDefinition Height="0.25*"/>
                <RowDefinition Height="0.5*"/>
                <RowDefinition Height="0.25*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.25*"/>
             </Grid.RowDefinitions>
 
-            <ComboBox Name="UnitsOfMeasureCmBx" Grid.Column="1" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}">
+            <ComboBox Name="UnitsOfMeasureCmBx" Grid.Column="1" Grid.Row="1"  Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>
+
+            <ComboBox Name="FractionPatternCmBx" Grid.Column="1" Grid.Row="3" Style="{StaticResource OmagCut_ComboBox}">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>
+
+            <ComboBox Name="PrecisionCmBx" Grid.Column="2" Grid.Row="3" Style="{StaticResource OmagCut_ComboBox}">
                <ComboBox.ItemTemplate>
                   <DataTemplate>
                      <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
@@ -80,32 +100,32 @@
             </ComboBox>
 
          </Grid>
+      </GroupBox>
+
+
+      <GroupBox Name="TextColorGpBx"
+                Grid.Column="2" Grid.RowSpan="3" Grid.ColumnSpan="1"
+                Style="{DynamicResource OmagCut_GroupBox}">
+         <Grid>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.25*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.25*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <Button Name="TextColorBtn"
+                          Grid.Row="1" Grid.Column="1"
+                          Style="{StaticResource OmagCut_Button}" />
+         </Grid>
 
       </GroupBox>
 
-        <GroupBox Name="TextColorGpBx"
-                Grid.Column="2" Grid.RowSpan="3" Grid.ColumnSpan="1"
-                Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid>
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="0.25*"/>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="0.25*"/>
-                </Grid.ColumnDefinitions>
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="1*"/>
-                    <RowDefinition Height="0.5*"/>
-                </Grid.RowDefinitions>
-
-                <Button Name="TextColorBtn"
-                          Grid.Row="1" Grid.Column="1"
-                          Style="{StaticResource OmagCut_Button}" />
-            </Grid>
-
-        </GroupBox>
-
-        <GroupBox Name="FastGridGpBx"
+      <GroupBox Name="FastGridGpBx"
                 Grid.Column="1" Grid.Row="4" Grid.ColumnSpan="2"
                 Style="{DynamicResource OmagCut_GroupBox}">
          <Grid>
@@ -133,458 +153,458 @@
 
       </GroupBox>
 
-       
-       
-        <GroupBox Name="SlabGpBx" Grid.RowSpan="1" 
+
+
+      <GroupBox Name="SlabGpBx" Grid.RowSpan="1" 
                   Grid.Column="1" Grid.Row="3" Grid.ColumnSpan="2"
                   Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid>
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="2*"/>
-                    <ColumnDefinition Width="2*"/>
-                </Grid.ColumnDefinitions>
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                </Grid.RowDefinitions>
+         <Grid>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
 
-                <TextBlock Name="SlabLayerMsgTxBl" Grid.Column="0" Grid.Row="0" 
+            <TextBlock Name="SlabLayerMsgTxBl" Grid.Column="0" Grid.Row="0" 
                Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
 
-                <TextBlock Name="PartsLayerMsgTxBl" Grid.Column="0" Grid.Row="1" 
+            <TextBlock Name="PartsLayerMsgTxBl" Grid.Column="0" Grid.Row="1" 
                Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
 
-                <TextBlock Name="ScrapLayerMsgTxBl" Grid.Column="0" Grid.Row="2" 
+            <TextBlock Name="ScrapLayerMsgTxBl" Grid.Column="0" Grid.Row="2" 
                Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
 
-                <TextBlock Name="StdThickMsgTxBl" Grid.Column="0" Grid.Row="3" 
+            <TextBlock Name="StdThickMsgTxBl" Grid.Column="0" Grid.Row="3" 
                Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
 
-                <EgtWPFLib:EgtTextBox Name="SlabLayerMsgTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
+            <EgtWPFLib:EgtTextBox Name="SlabLayerMsgTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
                      Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}" />
 
-                <EgtWPFLib:EgtTextBox Name="PartsLayerMsgTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+            <EgtWPFLib:EgtTextBox Name="PartsLayerMsgTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                      Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}" />
 
-                <EgtWPFLib:EgtTextBox Name="ScrapLayerMsgTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+            <EgtWPFLib:EgtTextBox Name="ScrapLayerMsgTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
                      Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}" />
 
-                <EgtWPFLib:EgtTextBox Name="StdThickMsgTxBx" Grid.Column="1" Grid.Row="3" Margin="10,0,10,0"
+            <EgtWPFLib:EgtTextBox Name="StdThickMsgTxBx" Grid.Column="1" Grid.Row="3" Margin="10,0,10,0"
                      Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-            </Grid>
+         </Grid>
 
-        </GroupBox>
+      </GroupBox>
 
-        <!--Incilinazione da colore-->
-        <GroupBox Name="ColorToSideAngGpBx" Grid.RowSpan="3" 
+      <!--Incilinazione da colore-->
+      <GroupBox Name="ColorToSideAngGpBx" Grid.RowSpan="3" 
                   Grid.Column="0" Grid.Row="3"
                   Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid>
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="0*"/>
-                    <ColumnDefinition Width="2*"/>
-                    <ColumnDefinition Width="0"/>
-                    <ColumnDefinition Width="2*"/>
-                </Grid.ColumnDefinitions>
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="0.75*"/>
-                    <RowDefinition Height="0.25*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                </Grid.RowDefinitions>
+         <Grid>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0*"/>
+               <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="0"/>
+               <ColumnDefinition Width="2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.75*"/>
+               <RowDefinition Height="0.25*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
 
-                <Grid Grid.Row="0" Grid.ColumnSpan="7">
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="1*"/>
-                        <ColumnDefinition Width="1.5*"/>
-                        <ColumnDefinition Width="0.5*"/>
-                        <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="1.5*" />
-                    </Grid.ColumnDefinitions>
-                    <Grid.RowDefinitions>
-                        <RowDefinition Height="0.75*"/>
-                    </Grid.RowDefinitions>
+            <Grid Grid.Row="0" Grid.ColumnSpan="7">
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="1.5*"/>
+                  <ColumnDefinition Width="0.5*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="1.5*" />
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="0.75*"/>
+               </Grid.RowDefinitions>
 
-                    <CheckBox Name="CTSAboxEnableChBx" Grid.Column="0" Grid.Row="0"
+               <CheckBox Name="CTSAboxEnableChBx" Grid.Column="0" Grid.Row="0"
                         Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                    <TextBlock Name="CTSAboxEnableMsgTxBl" Grid.Column="1" Grid.Row="0"
+               <TextBlock Name="CTSAboxEnableMsgTxBl" Grid.Column="1" Grid.Row="0"
                         Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left" />
 
-                    <TextBlock Name="ToleranceMsgTxBl" Grid.Column="3" Grid.Row="0"
+               <TextBlock Name="ToleranceMsgTxBl" Grid.Column="3" Grid.Row="0"
                         Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                    <EgtWPFLib:EgtTextBox Name="ToleranceMsgTxBx" Grid.Column="4" Grid.Row="0" Margin="10,0,10,0"
+               <EgtWPFLib:EgtTextBox Name="ToleranceMsgTxBx" Grid.Column="4" Grid.Row="0" Margin="10,0,10,0" IsLength="False"
                         Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
-                </Grid>
-                
-                <TextBlock Name="TalloneMsgTxBl" Grid.Column="5" Grid.Row="1" Grid.ColumnSpan="2"
-                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <TextBlock Name="InclinazioneMsgTxBl" Grid.Column="3" Grid.Row="1" 
-                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-              
-                    
-                <CheckBox Name="CTSA1EnableChBx" Grid.Column="0" Grid.Row="2"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA1Btn" Grid.Row="2" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA1TalloneTxBx" Grid.Column="5" Grid.Row="2" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA1InclinazioneTxBx" Grid.Column="3" Grid.Row="2" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA2EnableChBx" Grid.Column="0" Grid.Row="3" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA2Btn" Grid.Row="3" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA2TalloneTxBx" Grid.Column="5" Grid.Row="3" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA2InclinazioneTxBx" Grid.Column="3" Grid.Row="3" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA3EnableChBx" Grid.Column="0" Grid.Row="4" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA3Btn" Grid.Row="4" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA3TalloneTxBx" Grid.Column="5" Grid.Row="4" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA3InclinazioneTxBx" Grid.Column="3" Grid.Row="4" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA4EnableChBx" Grid.Column="0" Grid.Row="5" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA4Btn" Grid.Row="5" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA4TalloneMsgTxBl" Grid.Column="2" Grid.Row="5" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA4TalloneTxBx" Grid.Column="5" Grid.Row="5" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA4InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="5" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA4InclinazioneTxBx" Grid.Column="3" Grid.Row="5" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA5EnableChBx" Grid.Column="0" Grid.Row="6" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA5Btn" Grid.Row="6" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA5TalloneMsgTxBl" Grid.Column="2" Grid.Row="6" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA5TalloneTxBx" Grid.Column="5" Grid.Row="6" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA5InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="6" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA5InclinazioneTxBx" Grid.Column="3" Grid.Row="6" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA6EnableChBx" Grid.Column="0" Grid.Row="7" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA6Btn" Grid.Row="7" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA6TalloneMsgTxBl" Grid.Column="2" Grid.Row="7" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA6TalloneTxBx" Grid.Column="5" Grid.Row="7" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA6InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="7" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA6InclinazioneTxBx" Grid.Column="3" Grid.Row="7" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA7EnableChBx" Grid.Column="0" Grid.Row="8" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA7Btn" Grid.Row="8" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA7TalloneMsgTxBl" Grid.Column="2" Grid.Row="8" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA7TalloneTxBx" Grid.Column="5" Grid.Row="8" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA7InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="8" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA7InclinazioneTxBx" Grid.Column="3" Grid.Row="8" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA8EnableChBx" Grid.Column="0" Grid.Row="9" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA8Btn" Grid.Row="9" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA8TalloneMsgTxBl" Grid.Column="2" Grid.Row="9" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA8TalloneTxBx" Grid.Column="5" Grid.Row="9" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA8InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="9" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA8InclinazioneTxBx" Grid.Column="3" Grid.Row="9" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA9EnableChBx" Grid.Column="0" Grid.Row="10" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA9Btn" Grid.Row="10" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA9TalloneMsgTxBl" Grid.Column="2" Grid.Row="10" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA9TalloneTxBx" Grid.Column="5" Grid.Row="10" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA9InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="10" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA9InclinazioneTxBx" Grid.Column="3" Grid.Row="10" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA10EnableChBx" Grid.Column="0" Grid.Row="11" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA10Btn" Grid.Row="11" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA10TalloneMsgTxBl" Grid.Column="2" Grid.Row="11" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA10TalloneTxBx" Grid.Column="5" Grid.Row="11" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA10InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="11" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA10InclinazioneTxBx" Grid.Column="3" Grid.Row="11" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
             </Grid>
 
-        </GroupBox>
+            <TextBlock Name="TalloneMsgTxBl" Grid.Column="5" Grid.Row="1" Grid.ColumnSpan="2"
+                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <TextBlock Name="InclinazioneMsgTxBl" Grid.Column="3" Grid.Row="1" 
+                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
 
-        <GroupBox Name="ThemesGpBx"
+
+            <CheckBox Name="CTSA1EnableChBx" Grid.Column="0" Grid.Row="2"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA1Btn" Grid.Row="2" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA1TalloneTxBx" Grid.Column="5" Grid.Row="2" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA1InclinazioneTxBx" Grid.Column="3" Grid.Row="2" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA2EnableChBx" Grid.Column="0" Grid.Row="3" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA2Btn" Grid.Row="3" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA2TalloneTxBx" Grid.Column="5" Grid.Row="3" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA2InclinazioneTxBx" Grid.Column="3" Grid.Row="3" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA3EnableChBx" Grid.Column="0" Grid.Row="4" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA3Btn" Grid.Row="4" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA3TalloneTxBx" Grid.Column="5" Grid.Row="4" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA3InclinazioneTxBx" Grid.Column="3" Grid.Row="4" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA4EnableChBx" Grid.Column="0" Grid.Row="5" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA4Btn" Grid.Row="5" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA4TalloneMsgTxBl" Grid.Column="2" Grid.Row="5" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA4TalloneTxBx" Grid.Column="5" Grid.Row="5" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA4InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="5" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA4InclinazioneTxBx" Grid.Column="3" Grid.Row="5" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA5EnableChBx" Grid.Column="0" Grid.Row="6" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA5Btn" Grid.Row="6" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA5TalloneMsgTxBl" Grid.Column="2" Grid.Row="6" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA5TalloneTxBx" Grid.Column="5" Grid.Row="6" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA5InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="6" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA5InclinazioneTxBx" Grid.Column="3" Grid.Row="6" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA6EnableChBx" Grid.Column="0" Grid.Row="7" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA6Btn" Grid.Row="7" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA6TalloneMsgTxBl" Grid.Column="2" Grid.Row="7" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA6TalloneTxBx" Grid.Column="5" Grid.Row="7" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA6InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="7" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA6InclinazioneTxBx" Grid.Column="3" Grid.Row="7" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA7EnableChBx" Grid.Column="0" Grid.Row="8" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA7Btn" Grid.Row="8" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA7TalloneMsgTxBl" Grid.Column="2" Grid.Row="8" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA7TalloneTxBx" Grid.Column="5" Grid.Row="8" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA7InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="8" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA7InclinazioneTxBx" Grid.Column="3" Grid.Row="8" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA8EnableChBx" Grid.Column="0" Grid.Row="9" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA8Btn" Grid.Row="9" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA8TalloneMsgTxBl" Grid.Column="2" Grid.Row="9" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA8TalloneTxBx" Grid.Column="5" Grid.Row="9" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA8InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="9" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA8InclinazioneTxBx" Grid.Column="3" Grid.Row="9" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA9EnableChBx" Grid.Column="0" Grid.Row="10" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA9Btn" Grid.Row="10" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA9TalloneMsgTxBl" Grid.Column="2" Grid.Row="10" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA9TalloneTxBx" Grid.Column="5" Grid.Row="10" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA9InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="10" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA9InclinazioneTxBx" Grid.Column="3" Grid.Row="10" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA10EnableChBx" Grid.Column="0" Grid.Row="11" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA10Btn" Grid.Row="11" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA10TalloneMsgTxBl" Grid.Column="2" Grid.Row="11" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA10TalloneTxBx" Grid.Column="5" Grid.Row="11" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA10InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="11" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA10InclinazioneTxBx" Grid.Column="3" Grid.Row="11" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+         </Grid>
+
+      </GroupBox>
+
+      <GroupBox Name="ThemesGpBx"
                 Grid.Column="1"
                   Grid.Row="5" 
                   Grid.ColumnSpan="2"
                 Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid >
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="0.5*"/>
-                    <ColumnDefinition Width="4*"/>
-                    <ColumnDefinition Width="0.5*"/>
-                </Grid.ColumnDefinitions>
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="0.25*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.25*"/>
-                </Grid.RowDefinitions>
+         <Grid >
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="4*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.25*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.25*"/>
+            </Grid.RowDefinitions>
 
-                <ComboBox Name="ThemesCmBx" Grid.Column="1" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}">
-                    <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                    </ComboBox.ItemTemplate>
-                </ComboBox>
+            <ComboBox Name="ThemesCmBx" Grid.Column="1" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>
 
-            </Grid>
+         </Grid>
 
-        </GroupBox>
+      </GroupBox>
 
-        <!--Affondamneto da Colore-->
-        <GroupBox Name="ColorToEngraveGpBx" Grid.RowSpan="3" 
+      <!--Affondamneto da Colore-->
+      <GroupBox Name="ColorToEngraveGpBx" Grid.RowSpan="3" 
                   Grid.Column="3" Grid.ColumnSpan="2" Grid.Row="3"
                   Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid>
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="0*"/>
-                    <ColumnDefinition Width="2*"/>
-                    <ColumnDefinition Width="0"/>
-                    <ColumnDefinition Width="2*"/>
-                </Grid.ColumnDefinitions>
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="0.75*"/>
-                    <RowDefinition Height="0.25*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                </Grid.RowDefinitions>
+         <Grid>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0*"/>
+               <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="0"/>
+               <ColumnDefinition Width="2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.75*"/>
+               <RowDefinition Height="0.25*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
 
-                <Grid Grid.Row="0" Grid.ColumnSpan="7">
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="1*"/>
-                        <ColumnDefinition Width="1.5*"/>
-                        <ColumnDefinition Width="0.5*"/>
-                        <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="1.5*" />
-                    </Grid.ColumnDefinitions>
-                    <Grid.RowDefinitions>
-                        <RowDefinition Height="0.75*"/>
-                    </Grid.RowDefinitions>
+            <Grid Grid.Row="0" Grid.ColumnSpan="7">
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="1.5*"/>
+                  <ColumnDefinition Width="0.5*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="1.5*" />
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="0.75*"/>
+               </Grid.RowDefinitions>
 
-                    <CheckBox Name="CTEboxEnableChBx" Grid.Column="0" Grid.Row="0"
+               <CheckBox Name="CTEboxEnableChBx" Grid.Column="0" Grid.Row="0"
                         Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                    <TextBlock Name="CTEboxEnableMsgTxBl" Grid.Column="1" Grid.Row="0"
+               <TextBlock Name="CTEboxEnableMsgTxBl" Grid.Column="1" Grid.Row="0"
                         Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left" />
 
-                    <TextBlock Name="ToleranceEMsgTxBl" Grid.Column="3" Grid.Row="0"
+               <TextBlock Name="ToleranceEMsgTxBl" Grid.Column="3" Grid.Row="0"
                         Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                    <EgtWPFLib:EgtTextBox Name="ToleranceEMsgTxBx" Grid.Column="4" Grid.Row="0" Margin="10,0,10,0"
+               <EgtWPFLib:EgtTextBox Name="ToleranceEMsgTxBx" Grid.Column="4" Grid.Row="0" Margin="10,0,10,0" IsLength="False"
                         Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
-                </Grid>
-
-                <TextBlock Name="AffondamentoMsgTxBl" Grid.Column="3" Grid.Row="1" Grid.ColumnSpan="2"
-                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-
-                <TextBlock Name="LarghezzaMsgTxBl" Grid.Column="5" Grid.Row="1" Grid.ColumnSpan="2"
-                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-
-                <CheckBox Name="CTE1EnableChBx" Grid.Column="0" Grid.Row="2"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE1Btn" Grid.Row="2" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE1AffondamentoTxBx" Grid.Column="3" Grid.Row="2" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE1LarghezzaTxBx" Grid.Column="5" Grid.Row="2" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE2EnableChBx" Grid.Column="0" Grid.Row="3"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE2Btn" Grid.Row="3" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE2AffondamentoTxBx" Grid.Column="3" Grid.Row="3" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE2LarghezzaTxBx" Grid.Column="5" Grid.Row="3" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE3EnableChBx" Grid.Column="0" Grid.Row="4"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE3Btn" Grid.Row="4" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE3AffondamentoTxBx" Grid.Column="3" Grid.Row="4" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE3LarghezzaTxBx" Grid.Column="5" Grid.Row="4" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE4EnableChBx" Grid.Column="0" Grid.Row="5"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE4Btn" Grid.Row="5" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE4AffondamentoTxBx" Grid.Column="3" Grid.Row="5" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE4LarghezzaTxBx" Grid.Column="5" Grid.Row="5" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE5EnableChBx" Grid.Column="0" Grid.Row="6"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE5Btn" Grid.Row="6" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE5AffondamentoTxBx" Grid.Column="3" Grid.Row="6" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE5LarghezzaTxBx" Grid.Column="5" Grid.Row="6" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE6EnableChBx" Grid.Column="0" Grid.Row="7"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE6Btn" Grid.Row="7" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE6AffondamentoTxBx" Grid.Column="3" Grid.Row="7" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE6LarghezzaTxBx" Grid.Column="5" Grid.Row="7" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE7EnableChBx" Grid.Column="0" Grid.Row="8"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE7Btn" Grid.Row="8" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE7AffondamentoTxBx" Grid.Column="3" Grid.Row="8" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE7LarghezzaTxBx" Grid.Column="5" Grid.Row="8" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE8EnableChBx" Grid.Column="0" Grid.Row="9"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE8Btn" Grid.Row="9" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE8AffondamentoTxBx" Grid.Column="3" Grid.Row="9" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE8LarghezzaTxBx" Grid.Column="5" Grid.Row="9" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE9EnableChBx" Grid.Column="0" Grid.Row="10"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE9Btn" Grid.Row="10" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE9AffondamentoTxBx" Grid.Column="3" Grid.Row="10" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE9LarghezzaTxBx" Grid.Column="5" Grid.Row="10" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE10EnableChBx" Grid.Column="0" Grid.Row="11"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE10Btn" Grid.Row="11" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE10AffondamentoTxBx" Grid.Column="3" Grid.Row="11" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE10LarghezzaTxBx" Grid.Column="5" Grid.Row="11" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
             </Grid>
 
-        </GroupBox>
+            <TextBlock Name="AffondamentoMsgTxBl" Grid.Column="3" Grid.Row="1" Grid.ColumnSpan="2"
+                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
 
-        <!--Selezione il tipo di avvio del programma-->
-        <GroupBox Name="StartLauncherGpBx"
+            <TextBlock Name="LarghezzaMsgTxBl" Grid.Column="5" Grid.Row="1" Grid.ColumnSpan="2"
+                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+
+            <CheckBox Name="CTE1EnableChBx" Grid.Column="0" Grid.Row="2"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE1Btn" Grid.Row="2" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE1AffondamentoTxBx" Grid.Column="3" Grid.Row="2" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE1LarghezzaTxBx" Grid.Column="5" Grid.Row="2" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE2EnableChBx" Grid.Column="0" Grid.Row="3"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE2Btn" Grid.Row="3" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE2AffondamentoTxBx" Grid.Column="3" Grid.Row="3" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE2LarghezzaTxBx" Grid.Column="5" Grid.Row="3" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE3EnableChBx" Grid.Column="0" Grid.Row="4"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE3Btn" Grid.Row="4" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE3AffondamentoTxBx" Grid.Column="3" Grid.Row="4" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE3LarghezzaTxBx" Grid.Column="5" Grid.Row="4" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE4EnableChBx" Grid.Column="0" Grid.Row="5"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE4Btn" Grid.Row="5" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE4AffondamentoTxBx" Grid.Column="3" Grid.Row="5" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE4LarghezzaTxBx" Grid.Column="5" Grid.Row="5" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE5EnableChBx" Grid.Column="0" Grid.Row="6"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE5Btn" Grid.Row="6" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE5AffondamentoTxBx" Grid.Column="3" Grid.Row="6" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE5LarghezzaTxBx" Grid.Column="5" Grid.Row="6" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE6EnableChBx" Grid.Column="0" Grid.Row="7"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE6Btn" Grid.Row="7" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE6AffondamentoTxBx" Grid.Column="3" Grid.Row="7" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE6LarghezzaTxBx" Grid.Column="5" Grid.Row="7" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE7EnableChBx" Grid.Column="0" Grid.Row="8"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE7Btn" Grid.Row="8" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE7AffondamentoTxBx" Grid.Column="3" Grid.Row="8" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE7LarghezzaTxBx" Grid.Column="5" Grid.Row="8" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE8EnableChBx" Grid.Column="0" Grid.Row="9"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE8Btn" Grid.Row="9" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE8AffondamentoTxBx" Grid.Column="3" Grid.Row="9" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE8LarghezzaTxBx" Grid.Column="5" Grid.Row="9" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE9EnableChBx" Grid.Column="0" Grid.Row="10"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE9Btn" Grid.Row="10" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE9AffondamentoTxBx" Grid.Column="3" Grid.Row="10" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE9LarghezzaTxBx" Grid.Column="5" Grid.Row="10" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE10EnableChBx" Grid.Column="0" Grid.Row="11"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE10Btn" Grid.Row="11" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE10AffondamentoTxBx" Grid.Column="3" Grid.Row="11" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE10LarghezzaTxBx" Grid.Column="5" Grid.Row="11" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+         </Grid>
+
+      </GroupBox>
+
+      <!--Selezione il tipo di avvio del programma-->
+      <GroupBox Name="StartLauncherGpBx"
                 Grid.Column="3" Grid.RowSpan="3" Grid.ColumnSpan="1"
                 Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid >
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="0.5*"/>
-                    <ColumnDefinition Width="4*"/>
-                    <ColumnDefinition Width="0.5*"/>
-                </Grid.ColumnDefinitions>
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="0.25*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.25*"/>
-                </Grid.RowDefinitions>
+         <Grid >
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="4*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.25*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.25*"/>
+            </Grid.RowDefinitions>
 
-                <ComboBox Name="StartLauncherCmBx" Grid.Column="1" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}">
-                    <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                    </ComboBox.ItemTemplate>
-                </ComboBox>
+            <ComboBox Name="StartLauncherCmBx" Grid.Column="1" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>
 
-            </Grid>
-        </GroupBox>
-       
-        <GroupBox Name="FeedbackGpBx"
+         </Grid>
+      </GroupBox>
+
+      <GroupBox Name="FeedbackGpBx"
                 Grid.Column="4" Grid.RowSpan="3" Grid.ColumnSpan="1"
                 Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid>
-                <Grid.ColumnDefinitions>
-                   <ColumnDefinition Width="0.25*"/>
-                   <ColumnDefinition Width="1*"/>
-                   <ColumnDefinition Width="0.25*"/>
-                </Grid.ColumnDefinitions>
-                        <Grid.RowDefinitions>
-                            <RowDefinition Height="0.5*"/>
-                            <RowDefinition Height="1*"/>
-                            <RowDefinition Height="0.5*"/>
-                        </Grid.RowDefinitions>
-                
-                        <Button Name="FeedbackBtn"
+         <Grid>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.25*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.25*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <Button Name="FeedbackBtn"
                               Grid.Row="1" Grid.Column="1"
                               Style="{DynamicResource OmagCut_YellowIconButton}">
-                        <Image Source="{DynamicResource SendImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-                </Button>
-            </Grid>
+               <Image Source="{DynamicResource SendImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+         </Grid>
 
       </GroupBox>
 

Options/OptionsPageUC.xaml.vb

@@ -7,6 +7,8 @@ Public Class OptionsPageUC
    Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
 
    Private UnitsList() As String = {"inch", "mm"}
+   Private FractionPatternList() As String = {"Decimal", "Foot'Inch""", "Only Inch"}
+   Private PrecisionList() As Double = {2, 4, 8, 16, 32, 64, 128}
    Private ThemesList() As String = {"Classic", "Dark"}
 
    ' "Last Project", "New Project", "Open Folder", "Show Window"
@@ -18,6 +20,10 @@ Public Class OptionsPageUC
       LanguageCmBx.ItemsSource = m_MainWindow.m_LanguagesList
       ' Associazione della lista unità di misura alla combobox
       UnitsOfMeasureCmBx.ItemsSource = UnitsList
+      ' Associazione della lista dei Pattern
+      FractionPatternCmBx.ItemsSource = FractionPatternList
+      ' Associazione della lista della precisione
+      PrecisionCmBx.ItemsSource = PrecisionList
       ' Associazione della lista temi alla combobox
       ThemesCmBx.ItemsSource = ThemesList
 
@@ -27,6 +33,16 @@ Public Class OptionsPageUC
       ' Imposto l'unità di misura corrente
       UnitsOfMeasureCmBx.SelectedIndex = If(EgtUiUnitsAreMM(), 1, 0)
 
+      ' Imposto il pattern della per la rappresentazione frazionaria
+      nCurrFractionPattern = GetPrivateProfileInt(S_GENERAL, K_FRACTIONPATTERN, 0, m_MainWindow.GetIniFile())
+      FractionPatternCmBx.SelectedIndex = nCurrFractionPattern
+      EgtWPFLib.FractionStringConverter.SetCurrFractionPattern(nCurrFractionPattern)
+
+      ' Imposto la preciosne della rappresentazione frazionaria
+      dPrecision = CDbl(GetPrivateProfileInt(S_GENERAL, K_PRECISION, 64, m_MainWindow.GetIniFile()))
+      Dim Index As Integer = PrecisionCmBx.Items.IndexOf(dPrecision)
+      PrecisionCmBx.SelectedIndex = Index
+
       ' Imposto il tema corrente
       ThemesCmBx.SelectedIndex = GetPrivateProfileInt(S_GENERAL, K_THEME, 0, m_MainWindow.GetIniFile())
       Themes_StartUp()
@@ -322,9 +338,60 @@ Public Class OptionsPageUC
       EgtSetUiUnits(bMM)
       m_MainWindow.m_CurrentProjectPageUC.UpdateHeightTxBx()
       WritePrivateProfileString(S_GENERAL, K_MMUNITS, If(bMM, "1", "0"), m_MainWindow.GetIniFile())
+
+      If bMM Then
+         ' se selezione MILLIMETRI nascondo la combobox che permette di inserie il tipo di pattern per la definizione delle frazioni
+         FractionPatternCmBx.Visibility = Visibility.Hidden
+         PrecisionCmBx.Visibility = Visibility.Hidden
+         Dim RowNum As Integer = UnitGrid.RowDefinitions.Count
+         If RowNum > 3 Then
+            UnitsOfMeasureCmBx.SetValue(Grid.RowSpanProperty, 3)
+         End If
+      Else
+         ' se selezione POLLICI mostro la combobox che permette di inserie il tipo di pattern per la definizione delle frazioni
+         FractionPatternCmBx.Visibility = Visibility.Visible
+         PrecisionCmBx.Visibility = Visibility.Visible
+         UnitsOfMeasureCmBx.SetValue(Grid.RowSpanProperty, 1)
+      End If
+
       ' Aggiorno dati nella pagina dipendenti da unità di misura
       UpdateSlabDxf()
       UpdateAllCSTA()
+      If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+         m_MainWindow.m_CurrentMachine.LoadWJMaterial()
+         If Not IsNothing(m_MainWindow.m_MachinePageUC.m_WaterJetPageUC) Then
+            m_MainWindow.m_MachinePageUC.m_WaterJetPageUC.WaterJetPage_Reinitialize()
+         End If
+      End If
+   End Sub
+
+   Private Sub FractionPatternCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles FractionPatternCmBx.SelectionChanged
+      nCurrFractionPattern = FractionPatternCmBx.SelectedIndex
+      EgtWPFLib.FractionStringConverter.SetCurrFractionPattern(nCurrFractionPattern)
+      WritePrivateProfileString(S_GENERAL, K_FRACTIONPATTERN, nCurrFractionPattern, m_MainWindow.GetIniFile())
+      ' Aggiorno dati nella pagina dipendenti da unità di misura
+      UpdateSlabDxf()
+      UpdateAllCSTA()
+      If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+         m_MainWindow.m_CurrentMachine.LoadWJMaterial()
+         If Not IsNothing(m_MainWindow.m_MachinePageUC.m_WaterJetPageUC) Then
+            m_MainWindow.m_MachinePageUC.m_WaterJetPageUC.WaterJetPage_Reinitialize()
+         End If
+      End If
+   End Sub
+
+   Private Sub PrecisionCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles PrecisionCmBx.SelectionChanged
+      dPrecision = PrecisionCmBx.SelectedValue
+      WritePrivateProfileString(S_GENERAL, K_PRECISION, dPrecision, m_MainWindow.GetIniFile())
+      ' Aggiorno dati nella pagina dipendenti da unità di misura
+      UpdateSlabDxf()
+      UpdateAllCSTA()
+      If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+         m_MainWindow.m_CurrentMachine.LoadWJMaterial()
+         If Not IsNothing(m_MainWindow.m_MachinePageUC.m_WaterJetPageUC) Then
+            m_MainWindow.m_MachinePageUC.m_WaterJetPageUC.WaterJetPage_Reinitialize()
+         End If
+      End If
    End Sub
 
    Private Sub ThemesCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles ThemesCmBx.SelectionChanged
@@ -648,70 +715,70 @@ Public Class OptionsPageUC
 
    Private Sub CTSA1InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA1InclinazioneTxBx.TextChanged
       If CTSA1InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA1InclinazioneTxBx.Text, dAng) Then CTSA1InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA1InclinazioneTxBx.Text, dAng) Then CTSA1InclinazioneTxBx.Text = ""
       End If
       CTSA1EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA2InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA2InclinazioneTxBx.TextChanged
       If CTSA2InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA2InclinazioneTxBx.Text, dAng) Then CTSA2InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA2InclinazioneTxBx.Text, dAng) Then CTSA2InclinazioneTxBx.Text = ""
       End If
       CTSA2EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA3InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA3InclinazioneTxBx.TextChanged
       If CTSA3InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA3InclinazioneTxBx.Text, dAng) Then CTSA3InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA3InclinazioneTxBx.Text, dAng) Then CTSA3InclinazioneTxBx.Text = ""
       End If
       CTSA3EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA4InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA4InclinazioneTxBx.TextChanged
       If CTSA4InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA4InclinazioneTxBx.Text, dAng) Then CTSA4InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA4InclinazioneTxBx.Text, dAng) Then CTSA4InclinazioneTxBx.Text = ""
       End If
       CTSA4EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA5InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA5InclinazioneTxBx.TextChanged
       If CTSA5InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA5InclinazioneTxBx.Text, dAng) Then CTSA5InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA5InclinazioneTxBx.Text, dAng) Then CTSA5InclinazioneTxBx.Text = ""
       End If
       CTSA5EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA6InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA6InclinazioneTxBx.TextChanged
       If CTSA6InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA6InclinazioneTxBx.Text, dAng) Then CTSA6InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA6InclinazioneTxBx.Text, dAng) Then CTSA6InclinazioneTxBx.Text = ""
       End If
       CTSA6EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA7InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA7InclinazioneTxBx.TextChanged
       If CTSA7InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA7InclinazioneTxBx.Text, dAng) Then CTSA7InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA7InclinazioneTxBx.Text, dAng) Then CTSA7InclinazioneTxBx.Text = ""
       End If
       CTSA7EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA8InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA8InclinazioneTxBx.TextChanged
       If CTSA8InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA8InclinazioneTxBx.Text, dAng) Then CTSA8InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA8InclinazioneTxBx.Text, dAng) Then CTSA8InclinazioneTxBx.Text = ""
       End If
       CTSA8EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA9InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA9InclinazioneTxBx.TextChanged
       If CTSA9InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA9InclinazioneTxBx.Text, dAng) Then CTSA9InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA9InclinazioneTxBx.Text, dAng) Then CTSA9InclinazioneTxBx.Text = ""
       End If
       CTSA9EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA10InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA10InclinazioneTxBx.TextChanged
       If CTSA10InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA10InclinazioneTxBx.Text, dAng) Then CTSA10InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA10InclinazioneTxBx.Text, dAng) Then CTSA10InclinazioneTxBx.Text = ""
       End If
       CTSA10EnableChBx_Click(sender, e)
    End Sub

Project/AddToDataBaseUC.xaml

@@ -0,0 +1,95 @@
+<UserControl x:Class="AddToDataBaseUC"
+            xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+            xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+            xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+            xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+            xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+            mc:Ignorable="d" 
+            d:DesignHeight="853.3" d:DesignWidth="1280">
+
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="2.5*"/>
+                <ColumnDefinition Width="0.25*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+            <!--Nome BLOCCO-->
+            <TextBlock Name="BlockTxBl" Grid.Column="1" Grid.Row="1" Text="Name block"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="BlockTxBx" Grid.Column="3" Grid.Row="1"
+                  Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+            <!--Numero ID-->
+            <TextBlock Name="NbrIdTxBl" Grid.Column="1" Grid.Row="3" Text="ID"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="NbrIdTxBx" Grid.Column="3" Grid.Row="3"
+                  Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+            <!--STATE-->
+            <TextBlock Name="StateTxBl" Grid.Column="1" Grid.Row="5" Text="State"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <ComboBox Name="StateCmBx" Grid.Column="3" Grid.Row="5" Style="{StaticResource OmagCut_LeftComboBoxInBorder}">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>
+            <!--PROJECT-->
+            <TextBlock Name="ProjectNameTxBl" Grid.Column="1" Grid.Row="7" Text="Project"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="ProjectTxBx" Grid.Column="3" Grid.Row="7" 
+                             Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+            <!--MATERIAL-->
+            <TextBlock Name="MatTxBl" Grid.Column="1" Grid.Row="9" Text="Mat"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="MatTxBx" Grid.Column="3" Grid.Row="9" 
+                             Style="{DynamicResource OmagCut_KeyboardTextBox}" IsEnabled="False"/>
+            <!--THICKNESS-->
+            <TextBlock Name="ThicknessTxBl" Grid.Column="1" Grid.Row="11" Text="Thickness"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="ThicknessTxBx" Grid.Column="3" Grid.Row="11"
+                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+            <!--WAREHOUSE-->
+            <TextBlock Name="WarehouseTxBl" Grid.Column="1" Grid.Row="13" Text="Warehouse position"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="WarehouseTxBx" Grid.Column="3" Grid.Row="13"
+                             Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+
+            <!--CANCEL-->
+            <Button Name="CacelBtn" Grid.Column="1" Grid.Row="15" Content="Delete"
+                    Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            <!--ADD-->            
+            <Button Name="AddBtn" Grid.Column="3" Grid.Row="15" Content="Add"
+                    Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            <!--PRINT-->
+            <Button Name="PrintBtn" Grid.Column="1" Grid.Row="17" Content="Print"
+                    Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            
+        </Grid>
+
+    </Border>
+
+</UserControl>

Project/AddToDataBaseUC.xaml.vb

@@ -0,0 +1,121 @@
+Imports EgtUILib
+Imports EgtPHOTOLib
+Imports System.IO
+
+Public Class AddToDataBaseUC
+
+   Private m_OmagPhotoWD As OmagPhotoWD
+
+#Region "PROPERTY"
+   Private Sub BlockTxBx_EgtClosed(sender As Object, e As EventArgs) Handles BlockTxBx.EgtClosed
+      ' assegno il dato alla classe inizializzata nella libreria
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock = BlockTxBx.Text
+      ' devo riasseganre il valore dell'indice
+      NbrIdTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNbrID
+      EnableButtons()
+   End Sub
+
+   Private Sub NbrIdTxBx_EgtClosed(sender As Object, e As EventArgs) Handles NbrIdTxBx.EgtClosed
+      ' assegno il dato alla classe inizializzata nella libreria
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNbrID = NbrIdTxBx.Text
+      EnableButtons()
+   End Sub
+
+   Private Sub StateCmBx_Changed() Handles StateCmBx.SelectionChanged
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.State = StateCmBx.SelectedIndex
+      EnableButtons()
+   End Sub
+
+   Private Sub ProjectTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ProjectTxBx.EgtClosed
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.ProjectAssignedTo = ProjectTxBx.Text
+      EnableButtons()
+   End Sub
+
+   Private Sub ThicknessTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ThicknessTxBx.EgtClosed
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Thickness = ThicknessTxBx.Text
+      EnableButtons()
+   End Sub
+
+   Private Sub WarehouseTxBx_EgtClosed(sender As Object, e As EventArgs) Handles WarehouseTxBx.EgtClosed
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.WarehousePosition = WarehouseTxBl.Text
+      EnableButtons()
+   End Sub
+#End Region    ' Property
+
+   Sub New(LocalOmagPhotoWD As OmagPhotoWD)
+
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+      m_OmagPhotoWD = LocalOmagPhotoWD
+   End Sub
+
+   ' dopo la crezione della pagina imposto lo stato dei pulsanti
+   Private Sub PostLoaded() Handles Me.Loaded
+      If EgtPHOTOLib.MainData.bEnableTextId Then
+         BlockTxBx.Visibility = Visibility.Collapsed
+         BlockTxBl.Visibility = Visibility.Collapsed
+      Else
+         NbrIdTxBx.IsEnabled = False
+      End If
+      PrintBtn.IsEnabled = EgtPHOTOLib.MainData.bEnablePrinter
+      EnableButtons()
+   End Sub
+
+#Region "COMMAND"
+   Private Sub CancelBtn_Click() Handles CacelBtn.Click
+      ' se è stata inserita nel DB allora devo rimuoverla ed esco dalla pagina
+      EgtPHOTOLib.refOptionPanelVM.Delete()
+      ' notifico che il grezzo è stato rimosso 
+      OmagPhotoWD.m_IsDeleted = True
+      ' notifico che il grezzo non è stato aggiunto al DB delle lastre
+      OmagPhotoWD.m_IsAdded = False
+      ' elimino l'identificativo usato nel database del grezzo appena inserito
+      OmagPhotoWD.m_sDtBsId = ""
+      ' esco dalla pagina
+      m_OmagPhotoWD.Close()
+   End Sub
+
+   Private Sub AddBtn_Click() Handles AddBtn.Click
+      ' se non sono validi i campi allora attendo
+      If Not EgtPHOTOLib.PhotoMap.refOptionPanelVM.Ok_IsEnabled Then Return
+      ' modalità di funzionamento della libreria: ProjectSlabVM.ProjectModeOpt.NEWSLAB
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.Save()
+      ' notifico che il grezzo è stato aggiunto al DB delle lastre
+      OmagPhotoWD.m_IsAdded = True
+      ' salvo l'identificativo usato nel database del grezzo appena inserito
+      OmagPhotoWD.m_sDtBsId = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Id
+      ' salvo il nome del blocco che è stato utilizzato
+      If Not EgtPHOTOLib.MainData.bEnableTextId Then
+         WritePrivateProfileString(S_SCRAPS, K_LASTBLOCK, EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock, m_OmagPhotoWD.m_MainWindow.GetIniFile())
+      End If
+      ' aggiorno il testo del messaggio "Add" → "Save"
+      AddBtn.Content = "Save"
+
+      ' notifico che da ora la lastra inserita è in modalità di modifica (non salvo la lastra come nuova, ma la sovrascrivo come in modifica)
+      EgtPHOTOLib.PhotoMap.refProjectVM.SetSelProjectMode(ProjectSlabVM.ProjectModeOpt.DETAIL)
+      EgtPHOTOLib.PhotoMap.refProjectVM.SelSlab.SetOrigValues()
+
+      ' notifico che la lastra è in modifica da questo programma
+      EgtPHOTOLib.PhotoMap.refProjectVM.SelSlab.IsSelected = EgtPHOTOLib.MainData.nKey
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.IsSelected()
+   End Sub
+
+   Private Sub PrintBtn_Click() Handles PrintBtn.Click
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.PrintLabel()
+   End Sub
+#End Region    ' Command
+
+#Region "METHODS"
+   Private Sub EnableButtons()
+      AddBtn.IsEnabled = EgtPHOTOLib.PhotoMap.refOptionPanelVM.Ok_IsEnabled
+      ' se la stampante non è abilitata allora non permetto assolutamente di abilitare il comando
+      If EgtPHOTOLib.MainData.bEnablePrinter Then
+         PrintBtn.IsEnabled = EgtPHOTOLib.PhotoMap.refOptionPanelVM.Ok_IsEnabled
+      End If
+
+   End Sub
+#End Region    ' Methods
+
+End Class

Project/CurrentProjectPageUC.xaml.vb

@@ -107,7 +107,8 @@ Public Class CurrentProjectPageUC
          Dim nDepthBits As Integer = GetPrivateProfileInt(S_OPENGL, K_DEPTHBITS, 32, m_MainWindow.GetIniFile())
          CurrentProjectScene.SetViewAttributes(nDriver, b2Buff, nColorBits, nDepthBits)
          ' inizializzo la scena (DB geometrico + visualizzazione) e verifico presenza chiave
-         If Not CurrentProjectScene.Init() Then
+         Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE)
+         If Not CurrentProjectScene.Init() Or Not bProd Then
             ' Rimuovo l'host della scena perchè altrimenti rimarrebbe il buco!!
             Me.CurrentProjectPageGrid.Children.Remove(CurrentProjectSceneHost)
             ' Flag per riavvio programma
@@ -158,6 +159,7 @@ Public Class CurrentProjectPageUC
 #End If
             m_MainWindow.Close()
             If bRestart Then Process.Start(Application.ResourceAssembly.Location)
+            Return
          End If
          ' visualizzazione avanzata dei triangoli costituenti le superfici
          Dim bShowTriaAdv As Boolean = (GetPrivateProfileInt(S_SCENE, K_SHOWTRIAADV, 1, m_MainWindow.GetIniFile()) <> 0)
@@ -168,11 +170,6 @@ Public Class CurrentProjectPageUC
          ' dimensione lineare max in pixel delle textures
          Dim nTxrMaxLinPix As Integer = GetPrivateProfileInt(S_SCENE, K_TEXMAXLINPIX, 4096, m_MainWindow.GetIniFile())
          EgtSetTextureMaxLinPixels(nTxrMaxLinPix)
-         ' Verifico abilitazione prodotto
-         If Not m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE) Then
-            Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_MISSINGKEYWD + 1), EgtMsg(MSG_MISSINGKEYWD + 5), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL, 1)
-            m_MainWindow.Close()
-         End If
          ' Recupero e imposto handle finestra principale
          Dim hMainWnd As IntPtr = New WindowInteropHelper(Application.Current.MainWindow).Handle
          EgtSetMainWindowHandle(hMainWnd)
@@ -399,6 +396,8 @@ Public Class CurrentProjectPageUC
       m_MainWindow.m_CadCutPageUC.m_NestPage.CalcRawPart()
       m_dRawHeight = 0
       UpdateHeightTxBx()
+      ' prima di parcheggiare svuoto dei pezzi in parcheggio sia vuota
+      m_MainWindow.m_CadCutPageUC.m_NestPage.ResetListOfGruopInPark()
       ' Parcheggio correttamente i pezzi precedentemente salvati
       Dim nId2 As Integer = EgtGetFirstPart()
       While nId2 <> GDB_ID.NULL
@@ -410,9 +409,14 @@ Public Class CurrentProjectPageUC
          nId2 = EgtGetNextPart(nId2)
       End While
       ' Aggiorno Aree totale e da lavorare dei pezzi
-      SetTotalArea( dTotArea)
+      SetTotalArea(dTotArea)
       UpdateToProduceArea()
       ShowAreas()
+      ' Salvo info di C home
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHome, 0))
+      EgtZoom(ZM.ALL)
       ' Dichiaro progetto non modificato
       EgtResetModified()
       Return True
@@ -508,8 +512,36 @@ Public Class CurrentProjectPageUC
       UpdateHeightTxBx()
       ' aggiorno materiale
       m_MainWindow.m_CurrentMachine.SetCurrMatByName(GetProjectMaterial())
+      ' aggiorno altezza sovaratavola
+      If GetPrivateProfileInt(S_GENERAL, "AdditionalTableByProj", 0, m_sIniFile) = 1 Then
+         ' leggo il valore OrigiAdditionalTable
+         Dim dValue As Double = m_MainWindow.m_CurrentMachine.dAdditionalTable
+         Select Case GetCurrentTable()
+            Case 3
+               EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, dValue)
+            Case 2
+               EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, dValue)
+            Case Else
+               EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, dValue)
+         End Select
+         m_MainWindow.m_CurrentMachine.dAdditionalTable = dValue
+      End If
       ' forzo visualizzazione eventuali dati su aree
-      SetAreasStatus( True)
+      SetAreasStatus(True)
+      ' Recupero info C Home
+      Dim dCHomeCurrMach As Double
+      Dim dCHomeCurrproj As Double
+      EgtGetAxisHomePos("C", dCHomeCurrMach)
+      ' Verifico che esista l'info del progetto
+      If EgtExistsInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME) Then
+         EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, dCHomeCurrproj)
+         ' Se la macchina indicata ha C Home differente allora comunico un errore del progetto
+         If Math.Abs(dCHomeCurrproj - dCHomeCurrMach) > EPS_ANG_SMALL Then
+            EgtOutLog(" WARNING -> C axes home project is different from current machine, delta ang C home:" & DoubleToString(dCHomeCurrproj - dCHomeCurrMach, 2))
+         End If
+      Else
+         EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHomeCurrMach, 0))
+      End If
       ' Dichiaro progetto non modificato
       EgtResetModified()
       Return True
@@ -856,7 +888,7 @@ Public Class CurrentProjectPageUC
 
    Friend Function UpdateSideAngCutProbeFlag() As Boolean
       Dim bCurrSacProbe As Boolean =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_SACPROBE, 0, m_MainWindow.GetMachIniFile()) <> 0)
+             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_SACPROBE, 0, m_MainWindow.GetMachIniFile()) <> 0) AndAlso m_MainWindow.m_CurrentMachine.IsRawProbingPossible()
       Dim bProjSacProbe As Boolean = GetSideAngCutProbeFlag()
       If bCurrSacProbe <> bProjSacProbe Then Return SetSideAngCutProbeFlag(bCurrSacProbe)
       Return True

Project/OmagPhotoWD.xaml

@@ -0,0 +1,40 @@
+<Window x:Class="OmagPhotoWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+        xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"
+        xmlns:OmagCUT="clr-namespace:OmagCUT"
+        xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"               
+        xmlns:EgtPHOTOLib="clr-namespace:EgtPHOTOLib;assembly=EgtPHOTOLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="OmagPHOTO" Height="700" Width="1250" WindowStyle="None" ResizeMode="NoResize" ShowInTaskbar="False" >
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid Name="OptionSLabGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="10*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="0.25*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.25*"/>
+                <RowDefinition Height="10*"/>
+                <RowDefinition Height="0.25*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.25*"/>
+            </Grid.RowDefinitions>
+            
+            <!-- nel codice mi occupo di riempire la griglia con gli UserControl -->
+            
+            <Button Name="ExitBtn" Grid.Column="2" Grid.Row="3"
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+                <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <DockPanel Grid.Column="1" Grid.Row="1" Visibility="Hidden">
+                <!--StatusBar-->
+                <EgtWPFLib5:StatusBarV DataContext="{StaticResource StatusBarVM}" DockPanel.Dock="Bottom"/>
+            </DockPanel>
+        </Grid>
+    </Border>
+</Window>

Project/OmagPhotoWD.xaml.vb

@@ -0,0 +1,172 @@
+Imports EgtUILib
+Imports EgtWPFLib5
+Imports EgtPHOTOLib
+Imports System.IO
+
+Public Class OmagPhotoWD
+   ' Riferimento alla MainWindow
+   Friend m_MainWindow As MainWindow
+
+   Private m_AddToDataBaseUC As AddToDataBaseUC
+   Private m_StateList As New List(Of EgtWPFLib5.IdNameStruct)
+
+   ' il contorno dell sfrido è definito a partire dai punti che rappresentano i vertici dello stesso
+   Private m_ContornScrap As New List(Of Point3d)
+   ' se lo stato della lastra è "2" significa che è già stata inserita nel DB (non devo generare una nuova foto!)
+   Private m_nState As Integer = 1
+   ' salvo il nome del file *.jpg 
+   Private m_sFileImage As String = String.Empty
+
+   ' definsce se il slavataggio è andato a buon fine (questa variabile deve esistere anche dopo la chiusura della finestra!)
+   Public Shared m_IsAdded As Boolean = False
+   Public Shared m_sDtBsId As String = ""
+   Public Shared m_bSlabIsSelected As Boolean = False
+
+   ' definisce se il grezzo è stato eliminato dal DB
+   Public Shared m_IsDeleted As Boolean = False
+
+   Public Sub New(sImage As String, ContornScrap As List(Of Point3d), MnWindow As MainWindow, nState As Integer, DatabaseID As String)
+
+      InitializeComponent()
+
+      ' salvo il riferimento della finestra principale
+      m_MainWindow = MnWindow
+      ' leggo lo stato dello sfrido per decidere quale modalità di apertuta usare
+      m_nState = nState
+
+      '--------------- CARCICO lastra esistente ---------------
+      If m_nState = 2 Then
+         m_bSlabIsSelected = False
+         ' ricerco l'elemento già inserito nel DB
+         For Each Item As Slab In EgtPHOTOLib.refProjectVM.SlabList
+            Dim CurrId As String = Item.GetCurrentID.Trim
+            If Item.GetCurrentID.Trim = DatabaseID.Trim Then
+               EgtPHOTOLib.refProjectVM.SelSlab = Item
+               m_bSlabIsSelected = True
+               Exit For
+            End If
+         Next
+         ' se non trovo nessun elemento nel db allora esco
+         If IsNothing(EgtPHOTOLib.refProjectVM.SelSlab) Then
+            EgtOutLog("ID is not found in database: " & DatabaseID)
+            m_bSlabIsSelected = False
+            Return
+         End If
+         ' procedo alla visualizzazione della pagina
+         EgtPHOTOLib.PhotoMap.refProjectVM.SelProjectMode = ProjectSlabVM.ProjectModeOpt.DETAIL
+         ' carico la lista degli stati letta dalla libreria
+         For Each Item As EgtWPFLib5.IdNameStruct In EgtPHOTOLib.PhotoMap.refOptionPanelVM.StateList
+            m_StateList.Add(Item)
+         Next
+
+         ' notifico che la lastra è in modifica da questo programma
+         EgtPHOTOLib.PhotoMap.refProjectVM.SelSlab.IsSelected = EgtPHOTOLib.MainData.nKey
+         EgtPHOTOLib.PhotoMap.refOptionPanelVM.IsSelected()
+
+         ' posiziono la finestra
+         Me.Top = 15
+         Me.Left = 15
+         Return
+      End If
+
+      '--------------- DEFINSCO nuova lastra esistente ---------------
+      ' imposto come prima pagina sempre la lista (per inizializzare gli elementi della libreria) → ACCELERARE il processo di creazione di questo oggetto!
+      EgtPHOTOLib.PhotoMap.refProjectVM.SelProjectMode = ProjectSlabVM.ProjectModeOpt.NEWSLAB
+      ' imposto il percoso della foto appena generato
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.ImagePath = sImage
+      ' carico la foto come texture
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.PostPhoto(sImage, "")
+      ' carico l'elenco dei materiali (non serve...)
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SetMaterialFromDB()
+      ' definisco la lista degli stati
+      For Each Item As EgtWPFLib5.IdNameStruct In EgtPHOTOLib.PhotoMap.refOptionPanelVM.StateList
+         m_StateList.Add(Item)
+      Next
+
+      ' imposto i dati lastra
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Thickness = m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight
+      ' carico la lista degli stati letta dalla libreria
+      EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelState = EgtPHOTOLib.PhotoMap.refOptionPanelVM.StateList(0)
+      ' ricorco il materiale corrente nell'elenco dei materiali presenti nel DB (se non presente nell'elenco?)
+      For Each MaterialItem As String In EgtPHOTOLib.PhotoMap.refOptionPanelVM.MaterialList
+         If MaterialItem.ToLower = m_MainWindow.m_CurrentMachine.CurrMat.sName.ToLower Then
+            EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Material = MaterialItem
+            Exit For
+         End If
+      Next
+
+      ' salvo in locale i punti che arrivano dal progetto
+      m_ContornScrap = ContornScrap
+      ' avvio la finestra di modifica
+      Dim m_refImagePrevieV As New EgtPHOTOLib.ImagePreviewV()
+      ' modifico l'immagine e salvo
+      m_refImagePrevieV.SetContourScraps(m_ContornScrap)
+      m_refImagePrevieV.Hide()
+      m_refImagePrevieV.Show()
+      m_refImagePrevieV.SaveImage()
+      m_refImagePrevieV.Close()
+      m_bSlabIsSelected = True
+
+      ' posiziono la finestra
+      Me.Top = 15
+      Me.Left = 15
+   End Sub
+
+   ' posizionamento degli UserControl all'interno della griglia
+   Private Sub OmagPhotoWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' definisco nella pagina la posizione dello UserControl e inizializzo le liste
+      m_AddToDataBaseUC = New AddToDataBaseUC(Me)
+      m_AddToDataBaseUC.SetValue(Grid.ColumnProperty, 0)
+      m_AddToDataBaseUC.SetValue(Grid.RowProperty, 1)
+      m_AddToDataBaseUC.SetValue(Grid.RowSpanProperty, 2)
+      Me.OptionSLabGrid.Children.Add(m_AddToDataBaseUC)
+      m_AddToDataBaseUC.StateCmBx.ItemsSource = m_StateList
+      ' recupero la scena dalla libreria e la carico nel finestra
+      Dim MyScene As New EgtPHOTOLib.SceneHostSlabV(EgtPHOTOLib.PhotoMap.refSceneHostVM)
+      MyScene.SetValue(Grid.ColumnProperty, 1)
+      MyScene.SetValue(Grid.ColumnSpanProperty, 2)
+      MyScene.SetValue(Grid.RowProperty, 1)
+      Me.OptionSLabGrid.Children.Add(MyScene)
+   End Sub
+
+   ' carcio i dati della lastra
+   Private Sub PostLoaded() Handles Me.Loaded
+      If Not m_bSlabIsSelected Then
+         Return
+      End If
+      ' carico i campi con i dati letti da database
+      If m_nState = 2 Then
+         ' provo ad eseguire la separazione dei campi 
+         m_sDtBsId = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Id
+         m_AddToDataBaseUC.BlockTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock
+         m_AddToDataBaseUC.NbrIdTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNbrID
+         m_AddToDataBaseUC.StateCmBx.SelectedIndex = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.State
+         m_AddToDataBaseUC.MatTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Material
+         m_AddToDataBaseUC.ThicknessTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Thickness
+         m_AddToDataBaseUC.ProjectTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.ProjectAssignedTo
+         ' aggiorno il testo del messaggio "Add" → "Save"
+         m_AddToDataBaseUC.AddBtn.Content = "Save"
+         Return
+      End If
+      ' inizializzo i campi
+      'm_AddToDataBaseUC.IdTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.Id
+      m_AddToDataBaseUC.BlockTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNameBlock
+      m_AddToDataBaseUC.NbrIdTxBx.Text = EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.sNbrID
+      m_AddToDataBaseUC.StateCmBx.SelectedIndex = 0
+      m_AddToDataBaseUC.MatTxBx.Text = m_MainWindow.m_CurrentMachine.CurrMat.sName
+      m_AddToDataBaseUC.ThicknessTxBx.Text = LenToString(m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight, 4)
+      m_AddToDataBaseUC.ProjectTxBx.Text = m_MainWindow.m_CurrentProjectPageUC.GetCurrentProjectName()
+      ' rendo in primo piano la finestra
+      Me.Activate()
+   End Sub
+
+   Private Sub ExitBtn_Click() Handles ExitBtn.Click
+      ' se esista una lastra corrente, notifico che deve essere deselezionata
+      If Not IsNothing(EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab) Then
+         EgtPHOTOLib.PhotoMap.refOptionPanelVM.SelSlab.IsSelected = 0
+         EgtPHOTOLib.PhotoMap.refOptionPanelVM.IsSelected()
+      End If
+      Me.Close()
+   End Sub
+
+End Class

Project/OpenPageUC.xaml

@@ -2,7 +2,8 @@
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+   xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"          
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="OpenPage_Initialized" Loaded="OpenPage_Loaded" Unloaded="OpenPage_Unloaded">
       
@@ -17,22 +18,42 @@
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="8*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
          
-         <!-- Definizione della Grid Inferiore per i Button V e X -->
+         <!-- Definizione della Grid Superiore -->
          <Grid Name="UpperButtonsGrid" Grid.Column="1" Grid.RowSpan="2">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="5*"/>
                <ColumnDefinition Width="7*"/>
             </Grid.ColumnDefinitions>
-            
+       
          </Grid>
 
-         <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-         <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
-            ItemsSource="{Binding ItemList}"/>
-         
+         <TextBlock Name="FilePathTxBl" Grid.Row="0" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            
+          <Grid Grid.Row="1" Grid.RowSpan="2">
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="6.5*"/>
+                    <RowDefinition Height="0.65*"/>
+                </Grid.RowDefinitions>
+                <ListBox Name="FileListBox"  ItemTemplate="{DynamicResource DataTemplateItem}"
+                  ItemsSource="{Binding ItemList}"/>
+
+                <Grid Grid.Row="1" Margin="0,0,8,0">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="4*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <EgtWPFLib:EgtTextBox Name="FindTxBx" Grid.Column="0"
+                               Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}"/>
+                    <Button Name="ClearFindBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Margin="0,6,2,6">
+                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}" Width="30" />
+                    </Button>
+                </Grid>
+
+            </Grid>
+          
          <Border Name="MessageBrd" Grid.Row="3" BorderThickness="0,1,0,0" BorderBrush="Gray">
             <TextBlock Name="MessageTxBx"  TextAlignment="Center"
                    Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>

Project/OpenPageUC.xaml.vb

@@ -38,6 +38,7 @@ Public Class OpenPageUC
       OpenSceneHost.SetValue(Grid.ColumnProperty, 1)
       OpenSceneHost.SetValue(Grid.RowProperty, 2)
       ' OpenSceneHost.SetValue(Grid.RowSpanProperty, 1)
+      OpenSceneHost.SetValue(Grid.ColumnSpanProperty, 2)
       Me.OpenPageGrid.Children.Add(OpenSceneHost)
 
       ' Definizione del collegamento tra ItemList e ListBox1
@@ -203,6 +204,36 @@ Public Class OpenPageUC
       End If
    End Sub
 
+   Private Sub FindTxBx_EgtClosed(sender As Object, e As EventArgs) Handles FindTxBx.EgtClosed
+      ' Elimino spazi iniziali e finali
+      FindTxBx.Text = FindTxBx.Text.Trim()
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      Dim UpdateListFile As New List(Of IconListBoxItem)
+      ' Se esiste un nome
+      If Not String.IsNullOrWhiteSpace(FindTxBx.Text) Then
+         For Each Item As IconListBoxItem In FileListBox.ItemsSource
+            If Item.Name.ToLower.Contains(FindTxBx.Text.ToLower) Then
+               UpdateListFile.Add(Item)
+            End If
+         Next
+      End If
+      If UpdateListFile.Count > 0 Then
+         FileListBox.ItemsSource = UpdateListFile
+      Else
+         FileListBox.ItemsSource = m_MainWindow.m_OpenItemList
+      End If
+   End Sub
+
+   Private Sub ClearFindBtn_Click() Handles ClearFindBtn.Click
+      ' svuoto la text
+      FindTxBx.Text = ""
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      ' e aggiorno la lista dei file
+      FileListBox.ItemsSource = m_MainWindow.m_OpenItemList
+   End Sub
+
    Private Function ClearView() As Boolean
       ' Pulisco il DB geometrico locale
       EgtNewFile()
@@ -460,7 +491,19 @@ Public Class OpenPageUC
       m_SceneButtons.MeasureBtn.IsChecked = False
       ' Istruzioni per chiudere OpenPageUC e aprire currentproject e cadcut page
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_OpenPage)
-      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+      If m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.CadCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
+            m_MainWindow.CadCutBtn.IsChecked = True
+         End If
+      ElseIf m_MainWindow.m_PrevActivePage = MainWindow.Pages.FrameCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.FrameCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
+            m_MainWindow.FrameCutBtn.IsChecked = True
+         End If
+      End If
       ' Non modifico progetto corrente
       m_MainWindow.m_ActivePage = m_MainWindow.m_PrevActivePage
    End Sub

Project/ProjectMgrUC.xaml.vb

@@ -1,4 +1,7 @@
-Imports System.IO
+Imports System.ComponentModel
+Imports System.Drawing
+Imports System.IO
+Imports System.Windows.Forms.Integration
 Imports EgtUILib
 Imports EgtWPFLib
 
@@ -30,6 +33,7 @@ Public Class ProjectMgrUC
          WorkBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 2)        'Work - Lavora
       End If
       TestBtn.ToolTip = EgtMsg(90255)                          'Test
+      ResetCutBtn.ToolTip = "Reset Cuts" & vbCrLf & "Reset Feed (Shift)"
    End Sub
 
    Private Sub ProjectMgrUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -99,7 +103,6 @@ Public Class ProjectMgrUC
       m_CurrProjPage.NewProject(nTabInd, bRetainParkedParts)
       ' Gestione stato FastGrid
       m_MainWindow.m_CadCutPageUC.m_FastGridSlabManager.OnPostNewProject()
-      EgtZoom(ZM.ALL)
    End Sub
 
    Friend Function ChooseTable() As Integer
@@ -249,13 +252,30 @@ Public Class ProjectMgrUC
    End Sub
 
    Private Sub ResetCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCutBtn.Click
+      If (Keyboard.Modifiers And ModifierKeys.Shift) Then
+         ' eseguo il ricalcolo delle sole FEED di lavorazione
+         UpdateFeedAllMachining()
+         Return
+      End If
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Cancello eventuali messaggi
       m_CurrProjPage.ClearMessage()
+      ' cancello tutti i tagli di separazione (Waterjet)
+      ResetAllSplitCurv()
+      ' cancello tutti i punti di inizio (Waterjet)
+      ResetAllStartCurv()
+      ' cancello tutti i ponticelli disegnati
+      ResetAllBRidges()
       ' Ricalcolo tutte le lavorazioni
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
       If nWarn = 1 Then m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SPLITPAGEUC + 11)) ' Lama troppo grande per utilizzo ventosa
+      ' Se eistono elimino i grezzi delle fasi che non contengono lavorazioni
+      ResetAllRawPart()
+      ' Aggiorno Info C Home
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHome, 0))
       ' Aggiorno visualizzazione
       EgtDraw()
    End Sub
@@ -353,6 +373,14 @@ Public Class ProjectMgrUC
          Return
       End If
       ' ---------------------------- Fine modalità test --------------------------------------------
+      ' se esiste salvo il nome del progetto
+      Dim sCurrProjName As String = String.Empty
+      GetPrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, "", sCurrProjName, m_MainWindow.GetIniFile())
+      If Not String.IsNullOrEmpty(sCurrProjName) Then
+         EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_PROJNAME, sCurrProjName)
+      Else
+         EgtRemoveInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_PROJNAME)
+      End If
 
       Dim bOk As Boolean = True
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
@@ -464,26 +492,34 @@ Public Class ProjectMgrUC
       If Not (m_CurrMachine.bProdLine Or m_CurrMachine.bDemo) Then
          ' Download programma (eventuali errori sono segnalati dalla funzione)
          If m_CurrNcComm.SendProgram(sCncPath, 900) Then
-            ' copio il progetto corrente come progetto in lavorazione
             Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
             My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
             ' se abilitato e non è restart, lancio eventuale lua post-trasmissione
             If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.SIMPLESTATISTICS) And nPhaseRestart = 0 Then
                m_MainWindow.ExecSentProgScript(False)
-               ''-------------------Avvio il Ciclo-Start-------------------------
-               'Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
-               'MyCicloStartWD.ShowDialog()
-               ''-------------------Avvio il Ciclo-Start-------------------------
             End If
          End If
 
-         '-------------------Avvio il Ciclo-Start-------------------------
-         If GetPrivateProfileInt(S_GENERAL, "StartProgram", 0, m_MainWindow.GetIniFile()) <> 0 Then
+         '------------------- INIZIO Avvio il Ciclo-Start-------------------------
+         If GetPrivateProfileInt(S_GENERAL, K_STARTPROGRAM, 0, m_MainWindow.GetIniFile()) <> 0 Then
             Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
             MyCicloStartWD.ShowDialog()
          End If
+         '------------------- FINE Avvio il Ciclo-Start-------------------------
 
-         '-------------------Avvio il Ciclo-Start-------------------------
+         ' ------------------ INIZIO gestione SCRAPS ---------------------------
+         Dim NewScrapsList As New List(Of Scrap)
+         ' procedo all'aggiornamento della lista degli sfridi
+         UpDateScrapList(NewScrapsList)
+
+         ' se esiste almeno uno sfrido da inserire come nuovo grezzo
+         If NewScrapsList.Count > 0 Then
+            ' apro la finestra con l'elenco degli sfridi
+            Dim MyScrapsWD As New ScrapsWD(m_MainWindow, Me, NewScrapsList)
+            MyScrapsWD.ShowDialog()
+
+         End If
+         ' ------------------ FINE gestione SCRAPS -----------------------------
 
          ' Altrimenti linea di produzione
       Else
@@ -656,6 +692,138 @@ Public Class ProjectMgrUC
 #End If
    End Sub
 
+   ' aggiorno la lista dei grezzi/sfridi
+   Public Sub UpDateScrapList(ByRef NewScrapsList As List(Of Scrap))
+      If IsNothing(NewScrapsList) Then
+         NewScrapsList = New List(Of Scrap)
+      Else
+         NewScrapsList.Clear()
+      End If
+      ' procedo all'aggiornamento della lista degli sfridi
+      Dim CurrRawId As Integer = EgtGetFirstRawPart()
+      Dim IsNewScraps As Integer = 0
+      Dim nCountScrap As Integer = 1
+      While CurrRawId <> GDB_ID.NULL
+         If EgtGetInfo(CurrRawId, K_ISNEWSCRAPS, IsNewScraps) Then
+            If IsNewScraps = 1 Or IsNewScraps = 2 Then
+               ' deve essere aggiunto nel DB delle lastre come nuovo grezzo (l'indice è utilizzato per definire il nome della lastra)
+               NewScrapsList.Add(New Scrap(CurrRawId, "Scrap_" & nCountScrap.ToString, IsNewScraps))
+               nCountScrap += 1
+               ' è già stato aggiunto al DB delle lastre come nuovo grezzo
+            Else
+               ' non  è stato definito come nuovo grezzo
+            End If
+         End If
+         CurrRawId = EgtGetNextRawPart(CurrRawId)
+      End While
+   End Sub
+
+   Public Sub UpdateFeedAllMachining()
+      ' recupero il valore di Feed della lavorazione corrente
+      Dim sMachiningName As String = String.Empty
+      If Not EgtMdbGetCurrMachiningParam(MCH_MP.NAME, sMachiningName) Then
+         ' errore: lavorazione non trovata
+         EgtOutLog(" - Prima di 'Reset Feed' accedere alla pagina MACCHINA!")
+         'm_MainWindow.m_CurrentProjectPageUC.SetErrorMessage("Salvare la lavorazione corrente")
+         Return
+      End If
+      Dim dFeed As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.FEED, dFeed)
+      Dim dFeedStarted As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.STARTFEED, dFeedStarted)
+      Dim dFeedEnded As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.ENDFEED, dFeedEnded)
+      Dim dFeedTipped As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.TIPFEED, dFeedTipped)
+      Dim dFeedBack As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.BACKFEED, dFeedBack)
+      Dim dFeedSideAng As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.SIDEANGFEED, dFeedSideAng)
+      Dim MachiningList As New List(Of SplitMach)
+
+      ' Recupero l'indice della fase corrente
+      Dim nCurrPhase As Integer = 1
+      ' recupero in numero di fasi presenti nel progetto
+      Dim nCountPhase As Integer = EgtGetPhaseCount()
+      ' ciclo su tutte le fasi di lavorazione
+      Dim nMach As Integer = 0
+      Dim nMachUpdated As Integer = 0
+      For IndexPhase As Integer = 1 To nCountPhase
+         ' imposto la fase corrente
+         nCurrPhase = IndexPhase
+         ' Preparo la lista delle lavorazioni
+         CalculateSplitMachList(nCurrPhase, MachiningList)
+         ' per ogni lavorazione corrente procedo ad aggiornare la feed
+         For IndexMachining As Integer = 0 To MachiningList.Count - 1
+            nMach += 1
+            Dim nOperId As Integer = MachiningList(IndexMachining).m_nId
+            ' setto la lavorazione come corrente
+            If EgtSetCurrMachining(nOperId) Then
+               Dim bUpdate As Boolean = False
+               ' STANDARD
+               Dim dOrigFeed As Double
+               EgtGetMachiningParam(MCH_MP.FEED, dOrigFeed)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeed - dFeed) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.FEED, dFeed)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' STARTED
+               Dim dOrigFeedStarted As Double
+               EgtGetMachiningParam(MCH_MP.STARTFEED, dOrigFeedStarted)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedStarted - dFeedStarted) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.STARTFEED, dFeedStarted)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' ENDED
+               Dim dOrigFeedEnded As Double
+               EgtGetMachiningParam(MCH_MP.ENDFEED, dOrigFeedEnded)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedEnded - dFeedEnded) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.ENDFEED, dFeedEnded)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' TIPPED
+               Dim dOrigFeedTipped As Double
+               EgtGetMachiningParam(MCH_MP.TIPFEED, dOrigFeedTipped)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedTipped - dFeedTipped) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.TIPFEED, dFeedTipped)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' BACK
+               Dim dOrigFeedBack As Double
+               EgtGetMachiningParam(MCH_MP.BACKFEED, dOrigFeedBack)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedBack - dFeedBack) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.BACKFEED, dFeedBack)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' SIDEANG
+               Dim dOrigFeedSideAng As Double
+               EgtMdbGetCurrMachiningParam(MCH_MP.SIDEANGFEED, dOrigFeedSideAng)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedBack - dFeedSideAng) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.SIDEANGFEED, dFeedSideAng)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' conto il numero di lavorazioni aggiornate
+               If bUpdate Then
+                  nMachUpdated += 1
+               End If
+            End If
+         Next
+      Next
+      m_MainWindow.m_CurrentProjectPageUC.SetInfoMessage("Lavorazione aggiornate: " & nMachUpdated & "/ " & nMach)
+   End Sub
+
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------
    Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double)
 
@@ -746,7 +914,7 @@ Public Class ProjectMgrUC
       Else
          m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
          EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
-         EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+         EgtResetMark(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       End If
       ' aggiorno il disegno
       EgtDraw()
@@ -929,3 +1097,60 @@ Public Class ProjectMgrUC
    End Sub
 
 End Class
+
+Public Class Scrap
+
+   Private m_iPictureID As Integer
+   Private m_sName As String
+   Private m_IdRaw As Integer
+   Private m_nState As Integer
+
+   Public Property PictureID() As Integer
+      Get
+         Return m_iPictureID
+      End Get
+      Set(value As Integer)
+         m_iPictureID = value
+      End Set
+   End Property
+
+   Public Property Name() As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+      End Set
+   End Property
+
+   Public ReadOnly Property IdRaw() As Integer
+      Get
+         Return m_IdRaw
+      End Get
+   End Property
+
+   Public ReadOnly Property nState As Integer
+      Get
+         Return m_nState
+      End Get
+   End Property
+
+   Public ReadOnly Property PictureString() As String
+      Get
+         Return "/Resources/ImportPageListBoxImages/" + PictureID.ToString() + ".png"
+      End Get
+   End Property
+
+   Sub New(IdScrap As Integer, NameScrap As String, State As Integer)
+      m_IdRaw = IdScrap
+      m_sName = NameScrap
+      m_nState = State
+      ' immagine del grezzo
+      If m_nState = 2 Then
+         m_iPictureID = 5
+      Else
+         m_iPictureID = 4
+      End If
+   End Sub
+
+End Class

Project/ScrapsWD.xaml

@@ -0,0 +1,50 @@
+<Window x:Class="ScrapsWD"
+    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+    xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+    FontFamily="{DynamicResource OmagCut_Font}"
+    Title="Scraps" Height="482.6" Width="226.6" WindowStyle="None" ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" Background="Transparent">
+
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="3*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <Label Name="TitleTxBl" Grid.Column="1" Grid.Row="1" Foreground="White" FontSize="20" VerticalAlignment="Center"/>
+            <ListBox Name="ScrapsListBox" Grid.Column="1" Grid.Row="2" ItemTemplate="{DynamicResource DataTemplateItem}"
+               ItemsSource="{Binding ItemList, NotifyOnSourceUpdated=True}"/>
+
+            <Grid Grid.Column="1" Grid.Row="4">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</Window>

Project/ScrapsWD.xaml.vb

@@ -0,0 +1,186 @@
+Imports EgtUILib
+Imports EgtPHOTOLib
+Imports System.IO
+
+Public Class ScrapsWD
+   ' Riferimento alla MainWindow
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_refProjectMgrUC As ProjectMgrUC
+
+   Private m_ScrapList As New List(Of Scrap)
+   Private m_CurrScrapId As Integer = GDB_ID.NULL
+   Private m_CurrScrapState As Integer = 2
+   Private m_sDatabaseId As String = ""
+
+   Private Sub Initalized()
+      ' resetto eventuali errori mostrati nella pagina
+      m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+
+      ' inserisco il titolo della pagina aperta
+      TitleTxBl.Content = "Scraps List"
+      ScrapsListBox.ItemsSource = m_ScrapList
+      ' definzione posizione finetra
+      Me.Left = 25
+      Me.Top = 25
+   End Sub
+
+   Public Sub New(Owner As Window, LocalProjectMgrUC As ProjectMgrUC, MyScrapList As List(Of Scrap))
+      Me.Owner = Owner
+      InitializeComponent()
+      m_ScrapList = MyScrapList
+      m_refProjectMgrUC = LocalProjectMgrUC
+      Initalized()
+   End Sub
+
+
+   ' visualizzo la fase del pezzo selezionato
+   Private Sub ScrapListBox_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles ScrapsListBox.PreviewMouseUp
+      Dim vItems As Scrap = ScrapsListBox.SelectedItems(0)
+      ' elimino l'utimo selzione
+      EgtResetMark(m_CurrScrapId)
+      EgtDeselectObj(m_CurrScrapId)
+      ' ricerco il grezzo associato a questo Id
+      Dim nRawId As Integer = EgtGetFirstRawPart()
+      While nRawId <> GDB_ID.NULL
+         If nRawId = vItems.IdRaw Then
+            m_CurrScrapId = nRawId
+            m_CurrScrapState = vItems.nState
+            If m_CurrScrapState = 2 Then
+               EgtGetInfo(nRawId, K_DATABASEID, m_sDatabaseId)
+            Else
+               m_sDatabaseId = String.Empty
+            End If
+            Dim nCurrRawPhase As Integer = 0
+            ' recupero la fase del grezzo corrente
+            EgtGetInfo(nRawId, "Ph", nCurrRawPhase)
+            If nCurrRawPhase <> 0 Then
+               ' evidenzio lo sfrido selezionato all'interno della fase
+               EgtSetCurrPhase(nCurrRawPhase)
+               EgtSetMark(m_CurrScrapId)
+               EgtSelectObj(m_CurrScrapId)
+               EgtDraw()
+               Return
+            End If
+         End If
+         nRawId = EgtGetNextRawPart(nRawId)
+      End While
+
+   End Sub
+
+   Private Sub OkBtn_Click() Handles OkBtn.Click
+      If m_CurrScrapId = GDB_ID.NULL Then Return
+      ' creo una copia dell'immagine attuale (fotocamera 1)
+      Dim sImage As String = String.Empty
+      Dim sInfo As String = String.Empty
+      GetPrivateProfileString(S_CAMERA, K_CAM_IMAGE, "", sImage, m_MainWindow.GetIniFile())
+      GetPrivateProfileString(S_CAMERA, K_CAM_INFO, "", sInfo, m_MainWindow.GetIniFile())
+      ' recupero dalla libreria il percoso del database
+      Dim sPhotoDir As String = String.Empty
+      EgtPHOTOLib.GetPhotoDir(sPhotoDir)
+      ' recupero l'ora corrente
+      Dim sDate As String = Date.Now.ToString
+      sDate = sDate.Replace("/", "_")
+      sDate = sDate.Replace(" ", "_")
+      sDate = sDate.Replace(":", "_")
+      Dim sNewPath As String = sPhotoDir & "\Scrap_" & sDate
+      Try
+         File.Copy(sImage, sNewPath & ".jpg", False)
+         File.Copy(sInfo, sNewPath & ".txt", False)
+      Catch ex As Exception
+         EgtOutLog(ex.Message.ToString)
+      End Try
+
+      ' se non esiste la classe StatusBar allora provo ad inizializzarla...
+      If IsNothing(EgtWPFLib5.LibMap.refStatusBarVM) Then
+         Dim objStatusBarVM As New EgtWPFLib5.StatusBarVM
+      End If
+      ' salvo il contesto corrente del programma
+      Dim nCurrentContetxt As Integer = EgtGetCurrentContext()
+      ' costruisco l'elenco ordinato dei punti che reppresentano il contorno del grezzo da salvare
+      Dim ContornScrapList As New List(Of Point3d)
+
+      Dim RefId As New Frame3d
+      Dim nRawSolidId As Integer = EgtGetFirstNameInGroup(m_CurrScrapId, "RawSolid")
+      EgtGetTextureFrame(nRawSolidId, nRawSolidId, RefId)
+      Dim nCurveCompoId As Integer = EgtGetFirstNameInGroup(m_CurrScrapId, "RawOutline")
+      Dim dStart As Double = 0
+      Dim dEnd As Double = 0
+      EgtCurveDomain(nCurveCompoId, dStart, dEnd)
+      Dim ptCurrPoint As Point3d
+      For dU As Integer = dStart To dEnd - 1
+         EgtAtParamPoint(nCurveCompoId, dU, m_CurrScrapId, ptCurrPoint)
+         ptCurrPoint.z = 0
+         ptCurrPoint.ToLoc(RefId)
+         ContornScrapList.Add(ptCurrPoint)
+      Next
+
+      MainData.SetPreviousContext(nCurrentContetxt)
+
+      'If Not IsNothing(MainData.ContextSTONELib) Or MainData.ContextSTONELib <> 0 Then
+      'If MainData.ContextSTONELib <> 0 Then
+      '   EgtSetCurrentContext(MainData.ContextSTONELib)
+      'End If
+
+      ' inizializzo PojectSlabV pechè si occupa di inizializzare le pagine Detail e Option 
+      Dim MyProjectSlab As New EgtPHOTOLib.ProjectSlabV
+      ' ACCELERARE il processo di creazione di questo oggetto!
+      MyProjectSlab.DataContext = New EgtPHOTOLib.ProjectSlabVM
+      ' per ogni creazione della nuova pagina viene creata una nuova scena, ma non viene eliminata
+      Dim refProjectVMSceneContext As Integer = EgtGetCurrentContext()
+
+      ' apro la finestra OmagPHOTO (passo il nome del file come copia dell'originale)
+      If ContornScrapList.Count > 2 Then
+         Dim MyOmagPhotoWD As New OmagPhotoWD(sNewPath & ".jpg", ContornScrapList, m_MainWindow, m_CurrScrapState, m_sDatabaseId)
+         OmagPhotoWD.m_IsAdded = False
+         OmagPhotoWD.m_sDtBsId = String.Empty
+         OmagPhotoWD.m_IsDeleted = False
+         MyOmagPhotoWD.ShowDialog()
+      Else
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+         m_MainWindow.m_CurrentProjectPageUC.SetErrorMessage("Error loading contour scrap")
+      End If
+
+      ' ripristino il contesto corrente dell'immagine
+      EgtSetCurrentContext(EgtPHOTOLib.MainData.PreviousContext)
+      ' se l'inserimento è andatoa buon fine allora procedo a notificarlo
+      If OmagPhotoWD.m_IsAdded AndAlso Not String.IsNullOrEmpty(OmagPhotoWD.m_sDtBsId) Then
+         EgtSetInfo(m_CurrScrapId, K_ISNEWSCRAPS, 2)
+         EgtSetInfo(m_CurrScrapId, K_DATABASEID, OmagPhotoWD.m_sDtBsId)
+      Else
+         ' se è stato eliminato dal DB allora aggiorno la lista dei grezzi
+         If OmagPhotoWD.m_IsDeleted Then
+            EgtSetInfo(m_CurrScrapId, K_ISNEWSCRAPS, 1)
+            EgtRemoveInfo(m_CurrScrapId, K_DATABASEID)
+         End If
+         Try
+            File.Delete(sNewPath & ".jpg")
+            File.Delete(sNewPath & ".txt")
+         Catch ex As Exception
+            EgtOutLog(ex.Message.ToString)
+         End Try
+      End If
+
+      '----------------INIZIO ELIMINAZIONE contesti generati da OmagPHOTOLib per la visualizzazione delle Texture
+      EgtDeleteContext(EgtPHOTOLib.MainData.ContextSTONELib)
+      EgtDeleteContext(refProjectVMSceneContext)
+      '----------------  FINE ELIMINAZIONE contesti
+
+      ' aggiorno la lista degli scrap
+      m_refProjectMgrUC.UpDateScrapList(m_ScrapList)
+      ScrapsListBox.ItemsSource = m_ScrapList
+      ScrapsListBox.Items.Refresh()
+   End Sub
+
+   Private Sub ExitBtn_Click() Handles ExitBtn.Click
+      ' resetto eventuali errori mostrati nella pagina
+      m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      ' deseleziono l'oggetto corrente
+      EgtResetMark(m_CurrScrapId)
+      EgtDeselectObj(m_CurrScrapId)
+      ' reimposto la fase iniziale
+      EgtSetCurrPhase(1)
+      EgtDraw()
+      Me.Close()
+   End Sub
+
+End Class

RawPhoto/Camera.vb

@@ -315,6 +315,16 @@ Public Class Camera
       GetPrivateProfileString(S_NCDATA, K_SPOTLIGHT2, "", sPLCVarSpotLight2, m_MainWindow.GetMachIniFile())
       Dim nPhotoDeley As Integer = GetPrivateProfileInt(S_NCNUM, K_PHOTODELEY, "100", m_MainWindow.GetMachIniFile())
 
+      ' eventualmente rimuovo inizio stringa: "PLC, ___"
+      Dim sItemString1() As String = Split(sPLCVarSpotLight1, ","c)
+      If sItemString1.Count > 1 Then
+         sPLCVarSpotLight1 = sItemString1(1).Trim
+      End If
+      Dim sItemString2() As String = Split(sPLCVarSpotLight2, ","c)
+      If sItemString2.Count > 1 Then
+         sPLCVarSpotLight2 = sItemString2(1).Trim
+      End If
+
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
          Case 1, 2
             If m_MainWindow.m_CNCommunication.m_nNCType = 2 Then