Merge branch 'Features/Set_Machining'

-aggiunto tooltip

AboutBox/AboutBoxWD.xaml

@@ -23,7 +23,8 @@
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.25*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.25*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.25*"/>
          </Grid.RowDefinitions>
@@ -35,7 +36,7 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
             <Border Name="LogoBrd" Grid.Column="1">
-               <Image Source="../Resources/AboutBoxImage.png" Stretch="Uniform"/>
+                    <Image Source="../Resources/NewIcons/Logo-Egalware (3).png" Stretch="Uniform"/>
             </Border>
          </Grid>
          <TextBlock Name="DescriptionLbl" Grid.Column="1" Grid.Row="3" HorizontalAlignment="Center"
@@ -44,13 +45,17 @@
             VerticalAlignment="Center" FontSize="18"/>
          <TextBlock Name="KeyLbl" Grid.Column="1" Grid.Row="5" HorizontalAlignment="Center"
             VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="MachineLbl" Grid.Column="1" Grid.Row="6" HorizontalAlignment="Center"
+
+            <TextBlock Name="AssStatusLbl" Grid.Column="1" Grid.Row="6" HorizontalAlignment="Center"
             VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="ProjectLbl" Grid.Column="1" Grid.Row="7" HorizontalAlignment="Center"
+
+            <TextBlock Name="MachineLbl" Grid.Column="1" Grid.Row="7" HorizontalAlignment="Center"
             VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="CopyrightLbl" Grid.Column="1" Grid.Row="8" HorizontalAlignment="Center"
+         <TextBlock Name="ProjectLbl" Grid.Column="1" Grid.Row="8" HorizontalAlignment="Center"
+            VerticalAlignment="Center" FontSize="18"/>
+         <TextBlock Name="CopyrightLbl" Grid.Column="1" Grid.Row="9" HorizontalAlignment="Center"
             VerticalAlignment="Center" FontSize="15" />
-         <Button Name="ExitBtn" Grid.Column="1" Grid.Row="10" IsCancel="True"
+         <Button Name="ExitBtn" Grid.Column="1" Grid.Row="11" IsCancel="True"
             Style="{DynamicResource OmagCut_WindowGrayTextButton}" Margin="1,0"/>
 
       </Grid>

AboutBox/AboutBoxWD.xaml.vb

@@ -33,6 +33,19 @@ Public Class AboutBoxWD
 #Else
       KeyLbl.Text = sKey & " - " & sOpts
 #End If
+      ' COPIATO da codice CAM5
+      Dim sAssStatus As String = " discontinued"
+      Dim nAssLeftDays As Integer
+      If EgtGetKeyAssLeftDays(nAssLeftDays) And nAssLeftDays >= 0 Then
+         If nAssLeftDays > 30 Then
+            sAssStatus = "expires within " & nAssLeftDays.ToString() & " days"
+         ElseIf nAssLeftDays > 0 Then
+            sAssStatus = "to be renewed within " & nAssLeftDays.ToString() & " days"
+         Else
+            sAssStatus = "to be renewed by today"
+         End If
+      End If
+      AssStatusLbl.Text = sAssStatus
       CopyrightLbl.Text = My.Application.Info.Copyright.ToString()
       MachineLbl.Text = "Machine : " & m_MainWindow.m_CurrentMachine.sMachineName
       ProjectLbl.Text = "Project : " & m_MainWindow.m_CurrentProjectPageUC.GetCurrentProjectName()

CAM/CamAuto.vb

@@ -1,4 +1,6 @@
-Imports EgtUILib
+Imports System.Windows.Forms.Integration
+Imports EgtUILib
+Imports EgtWPFLib5
 
 Friend Module CamAuto
 
@@ -21,15 +23,55 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.Add")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
+         m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage(EgtMsg(91017))
       End If
       m_MainWindow.m_CurrentProjectPageUC.ResetOrderMachiningFlag()
       Return bOk
    End Function
 
-   Friend Function AddWaterJetMachining( nOperId As Integer, ByRef nWarn As Integer) As Boolean
+   Friend Function AddSawMachining(nOperId As Integer, ByRef nNewOperation As Integer) As Boolean
+      EgtLuaCreateGlobTable("CAM")
+      SetLuaStandardCamParams()
+      EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
+      Dim nErr As Integer = 999
+      Dim bOk As Boolean = EgtLuaExecFile(m_MainWindow.GetCamAutoDir() & "\CamAuto.lua")
+      bOk = bOk AndAlso EgtLuaGetGlobIntVar("CAM.ERR", nErr) AndAlso nErr = 0
+      bOk = bOk AndAlso EgtLuaCallFunction("CAM.UpdateSawing")
+      EgtLuaGetGlobIntVar("CAM.ERR", nErr)
+      EgtLuaGetGlobIntVar("CAM.NEW_OPERATION", nNewOperation)
+      EgtLuaResetGlobVar("CAM")
+      If nErr <> 0 Then
+         bOk = False
+         EgtOutLog("Error in CamAuto : " & nErr.ToString())
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      End If
+      Return bOk
+   End Function
+
+   Friend Function ChangePvColor(nOperId As Integer, colCut As Color3d)
+      EgtLuaCreateGlobTable("CAM")
+      SetLuaStandardCamParams()
+      EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
+      Dim nErr As Integer = 999
+      Dim bOk As Boolean = EgtLuaExecFile(m_MainWindow.GetCamAutoDir() & "\CamAuto.lua")
+      bOk = bOk AndAlso EgtLuaGetGlobIntVar("CAM.ERR", nErr) AndAlso nErr = 0
+      bOk = bOk AndAlso EgtLuaExecLine("CAM.ChangePvColor( " & nOperId.ToString & ",Color3d(" & colCut.R.ToString & "," & colCut.G.ToString & "," & colCut.B.ToString & "))")
+      EgtLuaGetGlobIntVar("CAM.ERR", nErr)
+      EgtLuaResetGlobVar("CAM")
+      If nErr <> 0 Then
+         bOk = False
+         EgtOutLog("Error in CamAuto : " & nErr.ToString())
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      End If
+      Return bOk
+   End Function
+
+   Friend Function AddWaterJetMachining(nOperId As Integer, ByRef nWarn As Integer) As Boolean
       EgtLuaCreateGlobTable("CAM")
       SetLuaStandardCamParams()
       EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
@@ -39,9 +81,34 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.AddWaterJet")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
+      End If
+      Return bOk
+   End Function
+
+   ' versione CamAuto 2.6l1: gestione tagli con ridotto affondamento
+   Friend Function AddWaterJetMachining(LocaList As List(Of Integer), ByRef nWarn As Integer) As Boolean
+      EgtLuaCreateGlobTable("CAM")
+      SetLuaStandardCamParams()
+      For i As Integer = 0 To LocaList.Count - 1
+         EgtLuaSetGlobIntVar("CAM.TAB_OPERID." & (i + 1).ToString, LocaList(i))
+      Next
+      Dim nErr As Integer = 999
+      Dim bOk As Boolean = EgtLuaExecFile(m_MainWindow.GetCamAutoDir() & "\CamAuto.lua")
+      bOk = bOk AndAlso EgtLuaGetGlobIntVar("CAM.ERR", nErr) AndAlso nErr = 0
+      bOk = bOk AndAlso EgtLuaCallFunction("CAM.AddWaterJets")
+      EgtLuaGetGlobIntVar("CAM.ERR", nErr)
+      EgtLuaResetGlobVar("CAM")
+      If nErr > 0 Then
+         bOk = False
+         EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -55,9 +122,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.Erase")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       m_MainWindow.m_CurrentProjectPageUC.ResetOrderMachiningFlag()
       m_MainWindow.m_CurrentProjectPageUC.ResetProjectNcRestart()
@@ -73,9 +142,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.InvertVerticalCut")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -101,6 +172,63 @@ Friend Module CamAuto
       Return True
    End Function
 
+   Friend Function RestoreDef_Machinig(Optional bOnlySideAng As Boolean = True)
+      Dim sSawingTilted As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
+      Dim bApplySawingTilted As Boolean = m_MainWindow.m_CurrentMachine.bApplySawingTilted
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop dei pezzi nel grezzo
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nEntId As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         SetResetDef_Machining(nEntId, sSawingTilted, bApplySawingTilted, bOnlySideAng)
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop dei pezzi in parcheggio
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nEntId As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         SetResetDef_Machining(nEntId, sSawingTilted, bApplySawingTilted, bOnlySideAng)
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   ' ripristina la lavorazone indicata di default per i tagli inclinati
+   Private Sub SetResetDef_Machining(nEntId As Integer, sSawingTilted As String, bApplySawingTilted As Boolean, bOnlySideAng As Boolean)
+      While nEntId <> GDB_ID.NULL
+         Dim sInfoSIdeAng As String = String.Empty
+         EgtGetInfo(nEntId, INFO_SIDE_ANGLE, sInfoSIdeAng)
+         ' Se è un'entità associata ad una lavorazione inclinata
+         If Not String.IsNullOrEmpty(sInfoSIdeAng) Then
+            If bApplySawingTilted Then
+               ' forzo la lavorazione inclinata
+               If String.IsNullOrEmpty(sSawingTilted) Then
+                  ' ma se non esiste nessuna lavorezione specifica applico qualla standard
+                  EgtRemoveInfo(nEntId, DEF_MACHINING)
+               Else
+                  ' Applico quella specificata
+                  EgtSetInfo(nEntId, DEF_MACHINING, sSawingTilted)
+               End If
+            Else
+               ' Rimuovo la lavorazione e applico quella standard
+               EgtRemoveInfo(nEntId, DEF_MACHINING)
+            End If
+
+         ElseIf Not bOnlySideAng Then
+            Dim sInfo As String = String.Empty
+            EgtGetInfo(nEntId, DEF_MACHINING, sInfo)
+            If Not String.IsNullOrEmpty(sInfo) Then
+               ' se esiste una lavorazione specificata allora la rimuovo
+               EgtRemoveInfo(nEntId, DEF_MACHINING)
+            End If
+         End If
+         nEntId = EgtGetNext(nEntId)
+      End While
+   End Sub
+
    Friend Function ResetAllSplitCurv() As Boolean
       Dim bOk As Boolean = True
       Dim nIdPart As Integer = EgtGetFirstPart()
@@ -163,6 +291,61 @@ Friend Module CamAuto
       Return bOk
    End Function
 
+   Friend Function ResetAllSplitCut() As Boolean
+      Dim PartList As New List(Of Integer)
+      ' Ricerca nei grezzi dei pezzi (devono essere ricercati tra quelli presenti nei grezzi)
+      Dim bOk As Boolean = True
+      ' Recupero il numero di fasi presenti nel progetto
+      Dim nPhaseCount As Integer = EgtGetPhaseCount()
+      For nPhase As Integer = 1 To nPhaseCount
+         EgtSetCurrPhase(nPhase)
+         Dim nRawId As Integer = EgtGetFirstRawPart()
+         While nRawId <> GDB_ID.NULL
+            Dim nParId As Integer = EgtGetFirstPartInRawPart(nRawId)
+            If EgtVerifyRawPartPhase(nRawId, nPhase) Then
+               While nParId <> GDB_ID.NULL
+                  Dim nNextParId As Integer = EgtGetNextPartInRawPart(nParId)
+                  ' verifico se il pezzo passato è un taglio di sepatazione (il nome deve contenere "SpliCut")
+                  Dim sName As String = String.Empty
+                  If EgtGetName(nParId, sName) AndAlso sName.Contains(SPLIT_CUT) Then
+                     ' Rimuovo il pezzo dal grezzo
+                     If EgtRemovePartFromRawPart(nParId) Then
+                        ' Salvo l'indice del pezzo se non è stato già inserito
+                        Dim nIndex As Integer = PartList.FirstOrDefault(Function(nId) nId = nParId)
+                        If nIndex = 0 Then PartList.Add(nParId)
+                     End If
+                  End If
+                  nParId = nNextParId
+               End While
+            End If
+            nRawId = EgtGetNextRawPart(nRawId)
+         End While
+      Next
+      ' Reimposto la prima fase del progetto
+      EgtSetCurrPhase(1)
+      ' Procedo ad eliminare il pezzo
+      For Each Item As Integer In PartList
+         bOk = bOk And EgtErase(Item)
+      Next
+      Return bOk
+   End Function
+
+   Friend Function ResetAllRawPart() As Boolean
+      Dim nPhase As Integer = 1
+      Dim nOtherRaw As Integer = EgtGetFirstRawPart()
+      While nOtherRaw <> GDB_ID.NULL
+         ' se il pezzo non appartiene alla prima fase allora viene eliminato
+         If Not EgtVerifyRawPartPhase(nOtherRaw, nPhase) Then
+            Dim NextRaw As Integer = EgtGetNextRawPart(nOtherRaw)
+            EgtRemoveRawPart(nOtherRaw)
+            nOtherRaw = NextRaw
+         Else
+            nOtherRaw = EgtGetNextRawPart(nOtherRaw)
+         End If
+      End While
+      Return True
+   End Function
+
    ' verifico che il contorno passato non sia stato separato
    Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer)
       Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
@@ -215,9 +398,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.UpdateAllTp")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -231,9 +416,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.Sort")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -248,9 +435,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.SpecApplyDisp")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       If ResetOrderMachiningFlag Then
          m_MainWindow.m_CurrentProjectPageUC.ResetOrderMachiningFlag()
@@ -266,7 +455,7 @@ Friend Module CamAuto
             EgtGetGroupObjs(EgtGetFirstNameInGroup(nPartId, NAME_UNDERDRILL)) = 0 Then
             Return True
          End If
-      ' Se tutti i pezzi
+         ' Se tutti i pezzi
       Else
          ' Salvo fase attualmente corrente
          Dim nOriPhase As Integer = EgtGetCurrPhase()
@@ -393,6 +582,7 @@ Friend Module CamAuto
       Return EgtRemoveOperationHome(nId)
    End Function
 
+   ' Verifico che per tutte le lavorazioni sia attrezzato l'utensile
    Friend Function VerifySetup(ByRef sMissingTools As String) As Boolean
       Dim bOk As Boolean = True
       Dim bIsMultiCut = (EgtGetHeadId("H101") <> GDB_ID.NULL)
@@ -407,9 +597,9 @@ Friend Module CamAuto
             Dim sTool2 As String = String.Empty
             EgtGetMachiningParam(MCH_MP.TUUID, sTuuid)
             EgtTdbGetToolFromUUID(sTuuid, sTool)
-            If String.IsNullOrWhiteSpace( sTool) Then
+            If String.IsNullOrWhiteSpace(sTool) Then
                Dim sMchTool As String = ""
-               EgtGetMachiningParam( MCH_MP.TOOL, sMchTool)
+               EgtGetMachiningParam(MCH_MP.TOOL, sMchTool)
                bOk = False
                If sMissingTools.IndexOf(sMchTool) = -1 Then
                   sMissingTools = sMissingTools & sMchTool & ", "
@@ -422,8 +612,24 @@ Friend Module CamAuto
                   End If
                   sTool2 = sTool & "-2"
                End If
-               If String.Compare(sTool, m_MainWindow.m_CurrentMachine.sCurrSaw) <> 0 AndAlso
-                  ( String.IsNullOrWhiteSpace( sTool2) OrElse String.Compare(sTool2, m_MainWindow.m_CurrentMachine.sCurrSaw) <> 0) AndAlso
+               If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+                  Dim bOnHolder As Boolean = False
+                  For Each ToolPosition As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+                     If ToolPosition.sTool <> String.Empty Then
+                        If sTool = ToolPosition.sTool Then
+                           bOnHolder = True
+                           Exit For
+                        End If
+                     End If
+                  Next
+                  If Not bOnHolder Then
+                     bOk = False
+                     If sMissingTools.IndexOf(sTool) = -1 Then
+                        sMissingTools = sMissingTools & sTool & ", "
+                     End If
+                  End If
+               ElseIf String.Compare(sTool, m_MainWindow.m_CurrentMachine.sCurrSaw) <> 0 AndAlso
+                  (String.IsNullOrWhiteSpace(sTool2) OrElse String.Compare(sTool2, m_MainWindow.m_CurrentMachine.sCurrSaw) <> 0) AndAlso
                   String.Compare(sTool, m_MainWindow.m_CurrentMachine.sCurrDripSaw) <> 0 Then
                   bOk = False
                   If sMissingTools.IndexOf(sTool) = -1 Then
@@ -461,6 +667,8 @@ Friend Module CamAuto
          End If
          nId = EgtGetNextOperation(nId)
       End While
+      Dim index As Integer = sMissingTools.LastIndexOf(","c)
+      sMissingTools = If(index >= 0, sMissingTools.Remove(index, 1), sMissingTools)
       Return bOk
    End Function
 
@@ -487,9 +695,10 @@ Friend Module CamAuto
       Dim dReducedDepth As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_REDUCEDDEPTH, 1, m_MainWindow.GetMachIniFile())
       ' Ciclo sulle lavorazioni
       Dim nOperId As Integer = EgtGetFirstOperation()
+      Dim LocalListOperId As New List(Of Integer)
       While nOperId <> GDB_ID.NULL
          ' verifico sia una lavorazione valida di taglio con lama
-         If IsValidMachining( nOperId) And EgtGetOperationType( nOperId) = MCH_OY.SAWING Then
+         If IsValidMachining(nOperId) And EgtGetOperationType(nOperId) = MCH_OY.SAWING Then
             ' verifica interferenza
             Dim nFlag As Integer = FMI_TYPE.NONE
             If Not VerifyComposedMachining(nOperId, nFlag) Then
@@ -501,12 +710,14 @@ Friend Module CamAuto
                ' se abilitato e attivo waterjet, lo aggiungo per completare il taglio
                If m_MainWindow.m_CurrentMachine.WaterJettingActive Then
                   Dim nWarn As Integer = 0
-                  AddWaterJetMachining(nOperId, nWarn)
+                  LocalListOperId.Add(nOperId)
+                  'AddWaterJetMachining(nOperId, nWarn)
                End If
             End If
          End If
          nOperId = EgtGetNextOperation(nOperId)
       End While
+      If LocalListOperId.Count > 0 Then AddWaterJetMachining(LocalListOperId, 0)
       Return bModified
    End Function
 
@@ -610,8 +821,8 @@ Friend Module CamAuto
          If nOriLeadIn <> MCH_SAW_LI.STRICT Then
             EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.STRICT)
             Dim dUserAddLen As Double = 0
-            EgtGetInfo( nMchId, INFO_MCH_USER_SAL, dUserAddLen)
-            EgtRemoveInfo( nMchId, INFO_MCH_USER_SAL)
+            EgtGetInfo(nMchId, INFO_MCH_USER_SAL, dUserAddLen)
+            EgtRemoveInfo(nMchId, INFO_MCH_USER_SAL)
             Dim dAddLen As Double = 0
             EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
             EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen - dUserAddLen - dSafeLen)
@@ -630,8 +841,8 @@ Friend Module CamAuto
          If nOriLeadOut <> MCH_SAW_LO.STRICT Then
             EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.STRICT)
             Dim dUserAddLen As Double = 0
-            EgtGetInfo( nMchId, INFO_MCH_USER_EAL, dUserAddLen)
-            EgtRemoveInfo( nMchId, INFO_MCH_USER_EAL)
+            EgtGetInfo(nMchId, INFO_MCH_USER_EAL, dUserAddLen)
+            EgtRemoveInfo(nMchId, INFO_MCH_USER_EAL)
             Dim dAddLen As Double = 0
             EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
             EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen - dUserAddLen - dSafeLen)
@@ -788,9 +999,9 @@ Friend Module CamAuto
    Friend Function RemoveAllExitPreCuts() As Boolean
       Dim nOperId As Integer = EgtGetFirstOperation()
       While nOperId <> GDB_ID.NULL
-         Dim nNextOperId As Integer = EgtGetNextOperation( nOperId)
-         If EgtGetType( nOperId) <> MCH_OY.DISP AndAlso EgtExistsInfo(nOperId, INFO_MCH_EPC) Then
-            EgtRemoveOperation( nOperId)
+         Dim nNextOperId As Integer = EgtGetNextOperation(nOperId)
+         If EgtGetType(nOperId) <> MCH_OY.DISP AndAlso EgtExistsInfo(nOperId, INFO_MCH_EPC) Then
+            EgtRemoveOperation(nOperId)
          End If
          nOperId = nNextOperId
       End While
@@ -800,6 +1011,7 @@ Friend Module CamAuto
    Private Function SetLuaStandardCamParams(Optional bDripOk As Boolean = True) As Boolean
       Dim sMaterial As String = m_MainWindow.m_CurrentMachine.CurrMat.sName
       Dim sSawMch As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sSawTiltedMch As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
       Dim sMillMch As String = m_MainWindow.m_CurrentMachine.sCurrMilling
       Dim sDrillMch As String = m_MainWindow.m_CurrentMachine.sCurrDrilling
       Dim sWaterJetMch As String = m_MainWindow.m_CurrentMachine.sCurrWaterJetting
@@ -818,6 +1030,7 @@ Friend Module CamAuto
       Dim dMillingShort As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
       EgtLuaSetGlobStringVar("CAM.MATERIAL", sMaterial)
       EgtLuaSetGlobStringVar("CAM.SAWMCH", sSawMch)
+      EgtLuaSetGlobStringVar("CAM.SAWTILTEDMCH", sSawTiltedMch)
       EgtLuaSetGlobStringVar("CAM.MILLMCH", sMillMch)
       EgtLuaSetGlobStringVar("CAM.DRILLMCH", sDrillMch)
       EgtLuaSetGlobStringVar("CAM.POCKETMCH", sPocketMch)
@@ -977,13 +1190,13 @@ Friend Module CamAuto
       Dim nRawId As Integer = GetCurrentRaw()
       If nRawId = GDB_ID.NULL Then Return False
       ' Se non ci sono pezzi, esco
-      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart( nRawId)
+      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart(nRawId)
       If nPart1Id = GDB_ID.NULL Then Return True
       ' Verifico se cornice curva
       Dim nDir As Integer = 0
       EgtGetInfo(nPart1Id, INFO_FRAME_DIR, nDir)
-      Dim bSwap As Boolean = ( nDir = 0)
-      Dim bCurved As Boolean = ( nDir >= 2)
+      Dim bSwap As Boolean = (nDir = 0)
+      Dim bCurved As Boolean = (nDir >= 2)
       ' Recupero la lavorazione corrente di sgrossatura con lama
       Dim sCurrSawRoughing = m_MainWindow.m_CurrentMachine.sCurrSawRoughing
       If String.IsNullOrEmpty(sCurrSawRoughing) Then Return True
@@ -1010,8 +1223,8 @@ Friend Module CamAuto
       ' Imposto la geometria
       EgtSetMachiningGeometry(vId)
       ' Imposto trim iniziale e finale
-      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If( bSwap, -dTrimEnd, -dTrimStart))
-      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If( bSwap, -dTrimStart, -dTrimEnd))
+      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If(bSwap, -dTrimEnd, -dTrimStart))
+      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If(bSwap, -dTrimStart, -dTrimEnd))
       ' Se cornice curva, imposto SCC
       If bCurved Then EgtSetMachiningParam(MCH_MP.SOLCHOICETYPE, MCH_SCC.ADIR_NEAR)
       ' Applico la lavorazione
@@ -1026,13 +1239,13 @@ Friend Module CamAuto
       Dim nRawId As Integer = GetCurrentRaw()
       If nRawId = GDB_ID.NULL Then Return False
       ' Se non ci sono pezzi, esco
-      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart( nRawId)
+      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart(nRawId)
       If nPart1Id = GDB_ID.NULL Then Return True
       ' Verifico se cornice curva
       Dim nDir As Integer = 0
-      EgtGetInfo( nPart1Id, INFO_FRAME_DIR, nDir)
-      Dim bSwap As Boolean = ( nDir = 0)
-      Dim bCurved As Boolean = ( nDir >= 2)
+      EgtGetInfo(nPart1Id, INFO_FRAME_DIR, nDir)
+      Dim bSwap As Boolean = (nDir = 0)
+      Dim bCurved As Boolean = (nDir >= 2)
       ' Recupero la lavorazione corrente di finitura con lama
       Dim sCurrSawFinishing = m_MainWindow.m_CurrentMachine.sCurrSawFinishing
       If String.IsNullOrEmpty(sCurrSawFinishing) Then Return True
@@ -1069,8 +1282,8 @@ Friend Module CamAuto
       ' Imposto la geometria
       EgtSetMachiningGeometry(vId)
       ' Imposto trim iniziale e finale
-      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If( bSwap, -dTrimEnd, -dTrimStart))
-      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If( bSwap, -dTrimStart, -dTrimEnd))
+      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If(bSwap, -dTrimEnd, -dTrimStart))
+      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If(bSwap, -dTrimStart, -dTrimEnd))
       ' Se cornice curva, imposto SCC
       If bCurved Then EgtSetMachiningParam(MCH_MP.SOLCHOICETYPE, MCH_SCC.ADIR_NEAR)
       ' Applico la lavorazione
@@ -1085,13 +1298,13 @@ Friend Module CamAuto
       Dim nRawId As Integer = GetCurrentRaw()
       If nRawId = GDB_ID.NULL Then Return False
       ' Se non ci sono pezzi, esco
-      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart( nRawId)
+      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart(nRawId)
       If nPart1Id = GDB_ID.NULL Then Return True
       ' Verifico se cornice curva
       Dim nDir As Integer = 0
       EgtGetInfo(nPart1Id, INFO_FRAME_DIR, nDir)
-      Dim bSwap As Boolean = ( nDir = 0)
-      Dim bCurved As Boolean = ( nDir >= 2)
+      Dim bSwap As Boolean = (nDir = 0)
+      Dim bCurved As Boolean = (nDir >= 2)
       ' Recupero la lavorazione corrente di spatolatura con lama
       Dim sCurrSawSideFinishing = m_MainWindow.m_CurrentMachine.sCurrSawSideFinishing
       If String.IsNullOrEmpty(sCurrSawSideFinishing) Then Return True
@@ -1112,8 +1325,8 @@ Friend Module CamAuto
       ' Imposto la geometria
       EgtSetMachiningGeometry(vId)
       ' Imposto trim iniziale e finale
-      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If( bSwap, -dTrimEnd, -dTrimStart))
-      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If( bSwap, -dTrimStart, -dTrimEnd))
+      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If(bSwap, -dTrimEnd, -dTrimStart))
+      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If(bSwap, -dTrimStart, -dTrimEnd))
       ' Se cornice curva, imposto SCC
       If bCurved Then EgtSetMachiningParam(MCH_MP.SOLCHOICETYPE, MCH_SCC.ADIR_NEAR)
       ' Applico la lavorazione
@@ -1252,14 +1465,14 @@ Friend Module CamAuto
             dStartDist = dEndDist
             dEndDist = dTemp
          End If
-      ' altrimenti
+         ' altrimenti
       Else
          Dim vtSide As Vector3d
          ' Se faccia non limitata da altre o sopra la limitante
          If bFree Then
             EgtSetMachiningParam(MCH_MP.FACEUSE, MCH_MIL_FU.ORTUP_DOWN)
             vtSide = Vector3d.Z_AX()
-         ' altrimenti è stata trovata una faccia adiacente limitante
+            ' altrimenti è stata trovata una faccia adiacente limitante
          Else
             If vtAdjN.x > 10 * EPS_SMALL Then
                EgtSetMachiningParam(MCH_MP.FACEUSE, MCH_MIL_FU.ORTUP_LEFT)

CadCuts/CSVPage.xaml

@@ -27,7 +27,7 @@
          </Grid.ColumnDefinitions>
 
          <!--Griglia per oscurare i bottoni della pagina sottostante-->
-            <Grid Background="{DynamicResource OmagCut_Gray}">
+         <Grid Background="{DynamicResource OmagCut_Gray}">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
@@ -49,7 +49,7 @@
 
          <Label Name="CsvPathTxBl" Grid.Row="1" Background="White" FontSize="16" VerticalAlignment="Center" Padding="2,5,0,5"/>
 
-            <TreeView Name="PartsTreeView" Grid.Row="2" Background="{DynamicResource OmagCut_TreeViewBackGroundColor}">
+         <TreeView Name="PartsTreeView" Grid.Row="2" Background="{StaticResource OmagCut_TreeViewGradientGray}">
             <TreeView.Resources>
                <!--Modifico HierarchicalDataTemplate del CathegoryItem per poter inserire immagine e testo e per -->
                <!--renderlo apribile con un solo click -->
@@ -62,7 +62,7 @@
                      </Grid.ColumnDefinitions>
 
                      <Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Width="32" Margin="0,8,6,4" />
-                     <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="10" />
+                     <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="10" Foreground="Black" />
 
                   </Grid>
 
@@ -123,7 +123,10 @@
                         </Setter>
                         <Style.Triggers>
                            <DataTrigger Binding="{Binding bIsActive}" Value="False">
-                              <Setter Property="Foreground" Value="{StaticResource OmagCut_LightGray}"/>
+                              <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                           </DataTrigger>
+                           <DataTrigger Binding="{Binding bIsActive}" Value="True">
+                              <Setter Property="Foreground" Value="Black"/>
                            </DataTrigger>
                         </Style.Triggers>
                      </Style>
@@ -131,18 +134,25 @@
                </HierarchicalDataTemplate>
                <!--Modifico DataTemplate del ToolItem per poter inserire immagine e testo-->
                <DataTemplate DataType="{x:Type self:PartCustomItem}">
-                  <Grid Width="246" Margin="0,5,0,5" HorizontalAlignment="Right">
+                  <Grid Width="234.8" Margin="0,5,0,5" HorizontalAlignment="Right">
                      <Grid.ColumnDefinitions>
                         <ColumnDefinition Width="1*"/>
                         <ColumnDefinition Width="60"/>
                         <ColumnDefinition Width="1*"/>
                      </Grid.ColumnDefinitions>
 
-                     <TextBlock Grid.Column="0" Text="{Binding Name}" Height="18" FontSize="14" HorizontalAlignment="Right"/>
-                     <TextBlock Grid.Column="1" Text="{Binding sText1}" Height="18" FontSize="14" HorizontalAlignment="Center"/>
-                     <TextBlock Grid.Column="2" Text="{Binding sText2}" Height="18" FontSize="14" HorizontalAlignment="Left"/>
+                     <TextBlock x:Name="TbName"  Grid.Column="0" Text="{Binding Name}" Height="18" FontSize="14" HorizontalAlignment="Right"/>
+                     <TextBlock x:Name="TbText1" Grid.Column="1" Text="{Binding sText1}" Height="18" FontSize="14" HorizontalAlignment="Center"/>
+                     <TextBlock x:Name="TbText2" Grid.Column="2" Text="{Binding sText2}" Height="18" FontSize="14" HorizontalAlignment="Left"/>
 
                   </Grid>
+                  <DataTemplate.Triggers>
+                     <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                        <Setter TargetName="TbName" Property="TextDecorations" Value="Strikethrough" />
+                        <Setter TargetName="TbText1" Property="TextDecorations" Value="Strikethrough" />
+                        <Setter TargetName="TbText2" Property="TextDecorations" Value="Strikethrough" />
+                     </DataTrigger>
+                  </DataTemplate.Triggers>
                </DataTemplate>
             </TreeView.Resources>
 

CadCuts/CadCutPageUC.xaml

@@ -30,7 +30,7 @@
          </Grid.ColumnDefinitions>
 
          <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-                <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                <Image Name="PhotoIMG" Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
          </Button>
             <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
             <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>

CadCuts/CadCutPageUC.xaml.vb

@@ -2,6 +2,7 @@
 Imports EgtWPFLib
 Imports System.Reflection
 Imports System.Globalization
+Imports EgtWPFLib5
 
 Public Class CadCutPageUC
 

CadCuts/ChangeToolWD.xaml

@@ -0,0 +1,92 @@
+<Window x:Class="ChangeToolWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="ChooseTool" Height="382.6" Width="426.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
+
+   <Border Style="{DynamicResource OmagCut_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.5*"/>
+            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="0.5*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+         </Grid.RowDefinitions>
+
+         <TextBlock Name="FilePathTxBl" Grid.Column="1" Grid.Row="0" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+         <!--TextAlignment="Center"
+              FontSize="20"
+              VerticalAlignment="Center"-->
+
+         <Grid Grid.Column="1" Grid.Row="1">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.8*"/>
+               <ColumnDefinition Width="0.7*"/>
+               <ColumnDefinition Width="0.7*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Grid.Column="0" Text="MACHINING" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <TextBlock Grid.Column="1" Text="TOOL" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <TextBlock Grid.Column="2" Text="TC" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+         </Grid>
+
+         <ListBox Name="SetUpToolListBox" Grid.Column="1" Grid.Row="2"
+                  ItemsSource="{Binding ItemList}">
+            <ListBox.ItemTemplate>
+               <DataTemplate>
+                  <Grid Width="{Binding ActualWidth, ElementName=SetUpToolListBox}" Margin="0,0,-40,0">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="0.6*"/>
+                        <ColumnDefinition Width="0.7*"/>
+                        <ColumnDefinition Width="0.3*"/>
+                        <ColumnDefinition Width="0.005*"/>
+                     </Grid.ColumnDefinitions>
+                     <TextBlock Grid.Column="0" Text="{Binding Machining}" Style="{StaticResource OmagCut_ListBoxTextBlock}"/>
+                     <TextBlock Grid.Column="1" Text="{Binding ToolName}" Style="{StaticResource OmagCut_ListBoxTextBlock}" />
+                     <TextBlock Grid.Column="2" Text="{Binding ToolPos}" Style="{StaticResource OmagCut_ListBoxTextBlock}"/>
+                     <Rectangle Grid.Column="2" Style="{DynamicResource Rect_SplitPage}"/>
+                     <Grid.ToolTip>
+                        <StackPanel>
+                           <TextBlock Text="{Binding Machining}" Style="{StaticResource OmagCut_ListBoxTextBlock}"/>
+                           <TextBlock Text="{Binding ToolName}" Style="{StaticResource OmagCut_ListBoxTextBlock}" />
+                           <TextBlock Text="{Binding ToolPos}" Style="{StaticResource OmagCut_ListBoxTextBlock}"/>
+                        </StackPanel>
+                     </Grid.ToolTip>
+                  </Grid>
+               </DataTemplate>
+            </ListBox.ItemTemplate>
+         </ListBox>
+
+         <TextBlock Name="ErrorTxBl" Grid.Column="1" Grid.Row="3" 
+                    Style="{DynamicResource OmagCut_ErrorTextBlock}"/>
+
+         <Grid Grid.Column="1" Grid.Row="5">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
+
+      </Grid>
+
+   </Border>
+</Window>

CadCuts/ChangeToolWD.xaml.vb

@@ -0,0 +1,376 @@
+Imports System.Collections.ObjectModel
+Imports EgtUILib
+
+Public Class ChangeToolWD
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_SetUpMachiningList As New ObservableCollection(Of ItemMachining)
+
+   Sub New(Owner As Window)
+      Me.Owner = Owner
+      InitializeComponent()
+   End Sub
+
+   ' Parametri della lama impostata correntemente in macchina
+   Private m_DefaultSaw_Name As String = String.Empty
+   Private m_DefaultSaw_Diam As Double = 0
+   Private m_DefaultSaw_Thick As Double = 0
+   Private m_DefaultSaw_Exists As Boolean = False
+
+   ' Il nome della lavorazione restituito dalla selezione
+   Private m_NewSawing As String = String.Empty
+   Public ReadOnly Property NewSawing As String
+      Get
+         Return m_NewSawing
+      End Get
+   End Property
+
+   ' Il colore della lavorazione
+   Private m_EgtColor As New Color3d
+   Public ReadOnly Property EgtColor As Color3d
+      Get
+         Return m_EgtColor
+      End Get
+   End Property
+
+   ' Il nome della posizione sulla rulliera
+   Private m_TCPos As String = String.Empty
+   Public ReadOnly Property TCPos As String
+      Get
+         Return m_TCPos
+      End Get
+   End Property
+
+   ' Nome della lavorazione corrente
+   Private m_CurrSawing As String = String.Empty
+   Public Property CurrSawing As String
+      Get
+         Return m_CurrSawing
+      End Get
+      Set(value As String)
+         m_CurrSawing = value
+      End Set
+   End Property
+
+   Private Sub GetDiamAndThickDefaultSaw()
+      m_DefaultSaw_Name = m_MainWindow.m_CurrentMachine.sCurrSaw
+      If EgtTdbSetCurrTool(m_DefaultSaw_Name) Then
+         ' Diametro lama lavorazione
+         EgtTdbGetCurrToolParam(MCH_TP.DIAM, m_DefaultSaw_Diam)
+         ' Spessore lama corrente
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, m_DefaultSaw_Thick)
+         m_DefaultSaw_Exists = True
+      End If
+   End Sub
+
+   Private Sub OpenFile_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' Posizione finestra
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+      ' Definizione del collegamento tra ItemList e ListBox1
+      SetUpToolListBox.ItemsSource = m_SetUpMachiningList
+      ' 90378=Seleziona lavorazione
+      FilePathTxBl.Text = EgtMsg(90378)
+   End Sub
+
+   Private Sub OpenFile_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
+      If String.IsNullOrEmpty(m_CurrSawing) Then
+         m_CurrSawing = m_MainWindow.m_CurrentMachine.sCurrSawing
+      End If
+      ' carico elenco degli utensili impostati attualmente in macchina (anche il laser!)
+      LoadSetUpMachining()
+      ' ricerco la lavorazione corrente
+      Dim Item As ItemMachining = m_SetUpMachiningList.FirstOrDefault(Function(x) x.Machining = m_CurrSawing)
+      Dim Index As Integer = m_SetUpMachiningList.IndexOf(Item)
+      If Index < 0 Then
+         ' Imposto lavorazione di default  
+         EgtMdbSetCurrMachining(m_CurrSawing)
+         Dim sTool As String = String.Empty
+         EgtMdbGetCurrMachiningParam(MCH_MP.TOOL, sTool)
+         ' ⚠️ Utensile {0} non attrezzato
+         ErrorTxBl.Text = String.Format(EgtMsg(90377), sTool)
+         Index = 0
+      End If
+      ' se presente seleziono il primo elemento
+      If m_SetUpMachiningList.Count > 0 Then
+         SetUpToolListBox.SelectedItem = m_SetUpMachiningList(Index)
+         OkBtn.IsEnabled = True
+      Else
+         OkBtn.IsEnabled = False
+      End If
+   End Sub
+
+#Region "SET UP MACHINING"
+
+   ' Creo le liste da mostrare nella lista
+   Private Function LoadSetUpMachining() As Boolean
+      Dim sNameTool As String = String.Empty
+      Dim nType As Integer = 0
+      Dim sHeadTool As String = String.Empty
+      Dim nExitTool As Integer = 0
+      ' Imposto il contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' Recupero la lista di tutte le lavorazioni di lama
+      Dim local_Sawing As TreeViewItem.CathegoryItem = GetAllSwaing()
+      ' Se non ci sono lavorazioni di lama allora esco
+      If IsNothing(local_Sawing) Then Return False
+
+      ' Ripulisco la lista degli utensili
+      m_SetUpMachiningList.Clear()
+      CreateSawingList(local_Sawing)
+
+      Return True
+   End Function
+
+   ' Creo la lista delle delle lavorazioni di lama da proporre
+   Private Sub CreateSawingList(SawingFam As TreeViewItem.CathegoryItem)
+      ' Recupero le info della lama montata di default
+      GetDiamAndThickDefaultSaw()
+      ' recupero la prima lavorazione
+      For Each Item As TreeViewItem.CustomItem In SawingFam.Items
+         Dim sNameTool As String = String.Empty
+         ' Imposto la lavorazione corrente
+         EgtMdbSetCurrMachining(Item.Name)
+         ' Recupero il nome dell'utensile della lavorazione
+         EgtMdbGetCurrMachiningParam(MCH_MP.TOOL, sNameTool)
+         If Not String.IsNullOrEmpty(sNameTool) And VerifyCurrSawTollerance(sNameTool) Then
+            ' Verifico che sia montata su un portautensile
+            EgtTdbSetCurrTool(sNameTool)
+            Dim sTCPos As String = String.Empty
+            EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sTCPos)
+            If Not String.IsNullOrEmpty(sTCPos) Then
+               ' Cerco nel porta utensili automaitico 
+               For Each ToolPosition As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+                  If ToolPosition.sTool <> String.Empty Then
+                     If sNameTool = ToolPosition.sTool Then
+                        ' Verifico che il materiale e lo spessore
+                        If VerifyCurrMachiningMaterial() Then
+                           m_SetUpMachiningList.Add(New ItemMachining(Item.Name, sNameTool, sTCPos, Utility.GetColorPV()))
+                        End If
+                        Exit For
+                     End If
+                  End If
+               Next
+            End If
+         End If
+      Next
+      ' reimposto la lavorazione di lama e la lama impostate in macchina
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw)
+      EgtMdbSetCurrMachining(m_MainWindow.m_CurrentMachine.sCurrSawing)
+   End Sub
+
+   ' verifico l'utensile corrente (impostato nella funzione chiamante) se può lavorare il grezzo corrente
+   Private Function VerifyCurrMachiningMaterial() As Boolean
+      Dim m_MaterialsList As New ObservableCollection(Of MachiningMaterial)
+      For Each Material As Material In m_MainWindow.m_CurrentMachine.Materials
+         If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+            m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName, Material.SubId))
+         Else
+            m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName))
+         End If
+      Next
+
+      Dim ToolString As String = String.Empty
+      EgtMdbGetCurrMachiningParam(MCH_MP.SYSNOTES, ToolString)
+      If ToolString <> String.Empty Then
+         Dim sItems() = ToolString.Split(";".ToCharArray)
+         Dim Index As Integer = 0
+         For Each Material As MachiningMaterial In m_MaterialsList
+            Dim Param() As String = sItems(Index).Split(",".ToCharArray)
+            Dim SubParam() As String = Param(0).Split(".".ToCharArray)
+            Dim nParId As Integer = 0
+            Dim nSubParId As Integer = 0
+            If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+               If StringToInt(SubParam(0), nParId) AndAlso nParId = m_MainWindow.m_CurrentMachine.CurrMat.nId AndAlso SubParam.Count > 1 AndAlso
+                  StringToInt(SubParam(1), nSubParId) AndAlso nSubParId = Material.nSubId Then
+                  StringToDouble(Param(1), Material.dMinThickness)
+                  StringToDouble(Param(2), Material.dMaxThickness)
+                  Material.VerifyIfActive()
+               Else
+                  Material.VerifyIfActive()
+               End If
+            Else
+               If StringToInt(Param(0), nParId) AndAlso nParId = m_MainWindow.m_CurrentMachine.CurrMat.nId Then
+                  StringToDouble(Param(1), Material.dMinThickness)
+                  StringToDouble(Param(2), Material.dMaxThickness)
+                  Material.VerifyIfActive()
+                  If m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight > Material.dMinThickness And m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight < Material.dMaxThickness Then
+                     Return True
+                  End If
+               End If
+            End If
+            Index += 1
+         Next
+      End If
+      Return False
+   End Function
+
+   ' verifico l'utensile corrente (impostato nella funzione chiamante) se ha le stesse dimensioni della lama di default
+   Private Function VerifyCurrSawTollerance(sNameTool As String) As Boolean
+      If m_DefaultSaw_Exists Then
+         If EgtTdbSetCurrTool(sNameTool) Then
+            ' Diametro nuova lama
+            Dim NewDiam As Double = 0
+            EgtTdbGetCurrToolParam(MCH_TP.DIAM, NewDiam)
+            ' Spessore lama
+            Dim NewThick As Double = 0
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, NewThick)
+            ' Verifico che la nuova lama possa essere applicata: diametro minore, uguale spessore
+            Dim Delta_Diam As Double = NewDiam - m_DefaultSaw_Diam
+            Dim Delta_Thick As Double = Math.Abs(NewThick - m_DefaultSaw_Thick)
+            If Delta_Diam < EPS_SMALL And Delta_Thick < EPS_SMALL Then
+               Return True
+            Else
+               EgtOutLog(String.Format("New saw {0} can not repalce the current {1}; Delta_Diam={2}, |Delta_Thick|={3} ", sNameTool, m_DefaultSaw_Name, Delta_Diam, Delta_Thick))
+            End If
+         Else
+            EgtOutLog("Impossible to find in tooldb SAW: " & sNameTool)
+         End If
+      Else
+         If String.IsNullOrEmpty(m_DefaultSaw_Name) Then
+            EgtOutLog("There is no currsaw setted in machine!")
+         Else
+            EgtOutLog("Impossible to find in tooldb currsaw setted in machine: " & m_DefaultSaw_Name)
+         End If
+      End If
+      Return False
+   End Function
+
+   ' Restituisce tutto l'elenco delle lavorazioni disponibili in macchina
+   Private Function GetAllSwaing() As TreeViewItem.CathegoryItem
+      Dim sFName As String = EgtMsg(MSG_MACHININGSDBPAGEUC + 31)
+      Dim nFType As Integer = MCH_MY.SAWING
+      If Not m_MainWindow.m_CurrentMachine.bSawing Then Return Nothing
+      ' Inserisco categoria ed eventuali elementi
+      Dim MachiningCathegory As New TreeViewItem.CathegoryItem(sFName, nFType)
+      Dim MachiningName As String = String.Empty
+      If EgtMdbGetFirstMachining(nFType, MachiningName) Then
+         MachiningCathegory.Items.Add(New TreeViewItem.CustomItem(MachiningName, nFType))
+         While EgtMdbGetNextMachining(nFType, MachiningName)
+            MachiningCathegory.Items.Add(New TreeViewItem.CustomItem(MachiningName, nFType))
+         End While
+      End If
+      Return MachiningCathegory
+   End Function
+
+#End Region    ' Set up machinining
+
+   Private Sub SetUpToolListBox_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles SetUpToolListBox.PreviewMouseUp
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      End If
+      m_NewSawing = m_SetUpMachiningList(SetUpToolListBox.SelectedIndex).Machining
+      m_EgtColor = m_SetUpMachiningList(SetUpToolListBox.SelectedIndex).PrintFootToolColor
+      m_TCPos = m_SetUpMachiningList(SetUpToolListBox.SelectedIndex).ToolPos
+      ' A seconda del tipo
+      OkBtn.IsEnabled = True
+   End Sub
+
+   Private Sub SetUpToolListBox_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles SetUpToolListBox.SelectionChanged
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      Else
+         m_NewSawing = m_SetUpMachiningList(SetUpToolListBox.SelectedIndex).Machining
+         m_EgtColor = m_SetUpMachiningList(SetUpToolListBox.SelectedIndex).PrintFootToolColor
+         m_TCPos = m_SetUpMachiningList(SetUpToolListBox.SelectedIndex).ToolPos
+         OkBtn.IsEnabled = True
+      End If
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      DialogResult = True
+   End Sub
+
+End Class
+
+Public Class ItemMachining
+
+   Private m_ToolPos As String = String.Empty
+   Private m_ToolName As String = String.Empty
+   Private m_Machining As String = String.Empty
+   Private m_ToolExit As Integer = 1
+   Private m_ToolType As Integer = -1
+   Private m_PrintFootToolColor As New Color3d(0, 255, 0, 100)
+   Private m_cSawColor As SolidColorBrush
+
+   ' Posizione porta utensile
+   Public Property ToolPos As String
+      Get
+         Return m_ToolPos
+      End Get
+      Set(value As String)
+         m_ToolPos = value
+      End Set
+   End Property
+
+   ' Nome utensile
+   Public Property ToolName As String
+      Get
+         Return m_ToolName
+      End Get
+      Set(value As String)
+         m_ToolName = value
+      End Set
+   End Property
+
+   ' Nome della lavorazione
+   Public Property Machining As String
+      Get
+         Return m_Machining
+      End Get
+      Set(value As String)
+         m_Machining = value
+      End Set
+   End Property
+
+   Public Property ToolExit As Integer
+      Get
+         Return m_ToolExit
+      End Get
+      Set(value As Integer)
+         m_ToolExit = value
+      End Set
+   End Property
+
+   Public Property ToolType As Integer
+      Get
+         Return m_ToolType
+      End Get
+      Set(value As Integer)
+         m_ToolType = value
+      End Set
+   End Property
+
+   Public Property PrintFootToolColor As Color3d
+      Get
+         Return m_PrintFootToolColor
+      End Get
+      Set(value As Color3d)
+         m_PrintFootToolColor = value
+      End Set
+   End Property
+
+   Public Property SawColor As SolidColorBrush
+      Get
+         Return m_cSawColor
+      End Get
+      Set(value As SolidColorBrush)
+         m_cSawColor = value
+      End Set
+   End Property
+
+   Sub New(sMachining As String, sToolName As String, sToolPos As String, cColor As Color3d)
+      m_Machining = sMachining
+      m_ToolPos = sToolPos
+      m_ToolName = sToolName
+      m_PrintFootToolColor = cColor
+      m_cSawColor = New SolidColorBrush(Color.FromRgb(m_PrintFootToolColor.R, m_PrintFootToolColor.G, m_PrintFootToolColor.B))
+   End Sub
+
+End Class

CadCuts/ChooseTestToolWD.xaml

@@ -0,0 +1,61 @@
+<Window x:Class="ChooseTestToolWD"
+    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+    xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+    FontFamily="{DynamicResource OmagCut_Font}"
+    Title="OpenFile" Height="382.6" Width="426.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
+
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <TextBlock Name="FilePathTxBl" Grid.Column="1" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <!--TextAlignment="Center"
+                  FontSize="20"
+                  VerticalAlignment="Center"-->
+            <ListBox Name="SetUpToolListBox" Grid.Column="1" Grid.Row="2"
+               ItemsSource="{Binding ItemList}">
+                <ListBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding ToolAlias}" Style="{StaticResource OmagCut_ListBoxTextBlock}" />
+                    </DataTemplate>
+                </ListBox.ItemTemplate>
+            </ListBox>
+
+            <Grid Grid.Column="1" Grid.Row="4">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</Window>

CadCuts/ChooseTestToolWD.xaml.vb

@@ -0,0 +1,311 @@
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+
+Public Class ChooseTestToolWD
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_SetUpToolList As New ObservableCollection(Of TestTool)
+
+   Sub New(Owner As Window)
+      Me.Owner = Owner
+      InitializeComponent()
+   End Sub
+
+   Private Sub OpenFile_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' Posizione finestra
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+      ' Definizione del collegamento tra ItemList e ListBox1
+      SetUpToolListBox.ItemsSource = m_SetUpToolList
+      FilePathTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 45)              ' Selezionare l'utensile da tastare
+   End Sub
+
+   Private Sub OpenFile_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
+      ' carico elenco degli utensili impostati attualmente in macchina (anche il laser!)
+      LoadSetUpTool()
+      ' ricerco l'utensile della lavorazione indicata
+      Dim Item As TestTool = m_SetUpToolList.FirstOrDefault(Function(x) x.ToolName = m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrToolFromSelectedSawCurv)
+      Dim Index As Integer = m_SetUpToolList.IndexOf(Item)
+      If Index < 0 Then
+         Index = 0
+      End If
+      ' se presente seleziono il primo elemento
+      If m_SetUpToolList.Count > 0 Then
+         SetUpToolListBox.SelectedItem = m_SetUpToolList(Index)
+         OkBtn.IsEnabled = True
+      Else
+         OkBtn.IsEnabled = False
+      End If
+   End Sub
+
+   Private Function LoadSetUpTool() As Boolean
+      Dim sNameTool As String = String.Empty
+      Dim sHeadTool As String = String.Empty
+      Dim nExitTool As Integer = 0
+
+      'sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+      'If Not String.IsNullOrEmpty(sNameTool) Then
+      '   ' Imposto la lama
+      '   m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool, True))
+      'End If
+      'sNameTool = m_MainWindow.m_CurrentMachine.sCurrMill
+      'If Not String.IsNullOrEmpty(sNameTool) Then
+      '   ' Imposto la fresa
+      '   m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool, False))
+      'End If
+      'sNameTool = m_MainWindow.m_CurrentMachine.sCurrDrill
+      'If Not String.IsNullOrEmpty(sNameTool) Then
+      '   ' Imposto il foretto
+      '   m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool, False))
+      'End If
+
+      sNameTool = "Laser point"
+      If Not String.IsNullOrEmpty(sNameTool) Then
+         ' Imposto laser di puntamento
+         m_SetUpToolList.Add(New TestTool(sNameTool, ""))
+      End If
+
+      sNameTool = m_MainWindow.m_CurrentMachine.sCurrWaterJet
+      If Not String.IsNullOrEmpty(sNameTool) Then
+         ' Imposto WJ
+         m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+      End If
+
+      Select Case m_MainWindow.m_CurrentMachine.MountedToolConfig
+         Case CurrentMachine.MountedToolConfigs.SAW
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+         Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrMill
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la fresa
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrDrill
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto il foretto
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+
+         Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            ' Recupero tutti gli utensili attrezzati (nel ToolChanger e nel ManualToolChanger)
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+               'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+               sNameTool = ToolChangerPos.sTool
+               If Not String.IsNullOrEmpty(sNameTool) Then
+                  ' Imposto la lama
+                  m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+               End If
+            Next
+            Return True
+
+         Case CurrentMachine.MountedToolConfigs.TOOLCHANGER
+            ' Recupero tutti gli utensili attrezzati (nel ToolChanger e nel ManualToolChanger)
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            Return True
+
+         Case CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            Return True
+
+         Case Else
+            Return False
+      End Select
+
+
+      Return True
+   End Function
+
+   Private Sub SetUpToolListBox_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles SetUpToolListBox.PreviewMouseUp
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      End If
+      ' A seconda del tipo
+      OkBtn.IsEnabled = True
+   End Sub
+
+   Private Sub SetUpToolListBox_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles SetUpToolListBox.SelectionChanged
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      Else
+         OkBtn.IsEnabled = True
+      End If
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      DialogResult = True
+   End Sub
+
+   ' restituisce l'oggetto selezionato in elenco e lo imposta come attivo
+   Friend Function GetSelectedTool() As TestTool
+      Dim SelTestTool As TestTool = DirectCast(SetUpToolListBox.SelectedItem, TestTool)
+      If SelTestTool.ToolAlias = "Laser point" Then
+         SelTestTool.ToolHead = "H3"
+         SelTestTool.ToolExit = 1
+         SelTestTool.ToolIsSaw = False
+         SelTestTool.ToolIsLaser = True
+      Else
+         EgtTdbSetCurrTool(SelTestTool.ToolName)
+         Dim sHeadTool As String = String.Empty
+         Dim nExitTool As Integer = 0
+         Dim sTypeTool As String = String.Empty
+         Dim nTypeTool As Integer
+         EgtTdbGetCurrToolParam(MCH_TP.TYPE, nTypeTool)
+         EgtTdbGetCurrToolParam(MCH_TP.HEAD, sHeadTool)
+         EgtTdbGetCurrToolParam(MCH_TP.EXIT_, nExitTool)
+         EgtTdbGetCurrToolParam(MCH_TP.TYPE, sTypeTool)
+         SelTestTool.ToolHead = sHeadTool
+         SelTestTool.ToolExit = nExitTool
+         SelTestTool.ToolType = nTypeTool
+         SelTestTool.ToolIsSaw = (nTypeTool = MCH_TY.SAW_STD)
+         SelTestTool.ToolIsLaser = False
+      End If
+
+      Return SelTestTool
+   End Function
+
+End Class
+
+Public Class TestTool
+
+   Private m_ToolAlias As String = String.Empty
+   Private m_ToolName As String = String.Empty
+   Private m_ToolHead As String = "H1"
+   Private m_ToolExit As Integer = 1
+   Private m_ToolIsSaw As Boolean = False
+   Private m_ToolIsLaser As Boolean = False
+   Private m_ToolType As Integer = -1
+
+   Public Property ToolAlias As String
+      Get
+         Return m_ToolAlias
+      End Get
+      Set(value As String)
+         m_ToolAlias = value
+      End Set
+   End Property
+
+   Public Property ToolName As String
+      Get
+         Return m_ToolName
+      End Get
+      Set(value As String)
+         m_ToolName = value
+      End Set
+   End Property
+
+   Public Property ToolHead As String
+      Get
+         Return m_ToolHead
+      End Get
+      Set(value As String)
+         m_ToolHead = value
+      End Set
+   End Property
+
+   Public Property ToolExit As Integer
+      Get
+         Return m_ToolExit
+      End Get
+      Set(value As Integer)
+         m_ToolExit = value
+      End Set
+   End Property
+
+   Public Property ToolType As Integer
+      Get
+         Return m_ToolType
+      End Get
+      Set(value As Integer)
+         m_ToolType = value
+      End Set
+   End Property
+
+   Public Property ToolIsSaw As Boolean
+      Get
+         Return m_ToolIsSaw
+      End Get
+      Set(value As Boolean)
+         m_ToolIsSaw = value
+      End Set
+   End Property
+
+   Public Property ToolIsLaser As Boolean
+      Get
+         Return m_ToolIsLaser
+      End Get
+      Set(value As Boolean)
+         m_ToolIsLaser = value
+      End Set
+   End Property
+
+   Sub New(sToolAlias As String, sToolName As String)
+      m_ToolAlias = sToolAlias
+      m_ToolName = sToolName
+   End Sub
+
+End Class

CadCuts/MoveRawPartPage.xaml

@@ -7,164 +7,167 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
 
-   <!-- Definizione della SplitPage -->
-   <Grid Name="SplitPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
+    <!-- Definizione della SplitPage -->
+    <Grid Name="SplitPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-      <!--Upper button grid-->
-      <Grid Grid.Column="1">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="4*"/>
-            <ColumnDefinition Width="8*"/>
-         </Grid.ColumnDefinitions>
-
-         <!--Griglia per oscurare i bottoni della pagina sottostante-->
-         <Grid Background="{DynamicResource OmagCut_Gray}">
+        <!--Upper button grid-->
+        <Grid Grid.Column="1">
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="8*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            <!--Griglia per oscurare i bottoni della pagina sottostante-->
+            <Grid Background="{DynamicResource OmagCut_Gray}">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
+                        <Image.RenderTransform>
+                            <TransformGroup>
+                                <RotateTransform Angle="180"/>
+                            </TransformGroup>
+                        </Image.RenderTransform>
+                    </Image>
+                </Button>
+                <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+            </Grid>
+        </Grid>
+
+        <!--Left Button Grid-->
+        <Grid Grid.RowSpan="3">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <Button Name="TopLBtn" Grid.Column="0" Grid.Row="1"
+         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+                <Image Source="{DynamicResource TopLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
-                  <Image.RenderTransform>
-                     <TransformGroup>
-                        <RotateTransform Angle="180"/>
-                     </TransformGroup>
-                  </Image.RenderTransform>
-               </Image>
+            <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
+         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+                <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-         </Grid>
-      </Grid>
-
-      <!--Left Button Grid-->
-      <Grid Grid.RowSpan="3">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="2*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
-
-         <Button Name="TopLBtn" Grid.Column="0" Grid.Row="1"
+            <Button Name="TopRBtn" Grid.Column="2" Grid.Row="1"
          Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource TopLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="TopRBtn" Grid.Column="2" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource TopRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
+                <Image Source="{DynamicResource TopRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
          Style="{DynamicResource OmagCut_LeftGrayGradientYellowButton}">
-            <Image Source="{DynamicResource LeftArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="1" Grid.Row="2" Width="50"
+                <Image Source="{DynamicResource LeftArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="1" Grid.Row="2" Width="50"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-         <Button Name="ResetBtn" Grid.Column="1" Grid.Row="2"
+            <Button Name="ResetBtn" Grid.Column="1" Grid.Row="2"
             Style="{DynamicResource OmagCut_YellowTextButton}">
-         </Button>
-         <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
+            </Button>
+            <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
          Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RightArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="BottomLBtn" Grid.Column="0" Grid.Row="3"
+                <Image Source="{DynamicResource RightArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="BottomLBtn" Grid.Column="0" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource BottomLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
+                <Image Source="{DynamicResource BottomLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="BottomRBtn" Grid.Column="2" Grid.Row="3"
+                <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="BottomRBtn" Grid.Column="2" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource BottomRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
+                <Image Source="{DynamicResource BottomRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
-         <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
+            <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
             Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                 <Image Source="{DynamicResource CounterClockwiseRotateImg}" Width="64" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
-         </Button>
+            </Button>
 
-         <Grid Name="RotationAngle" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center" VerticalAlignment="Center">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="Auto"/>
-               <ColumnDefinition Width="Auto"/>
-            </Grid.ColumnDefinitions>
-            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
+            <Grid Name="RotationAngle" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center" VerticalAlignment="Center">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="Auto"/>
+                    <ColumnDefinition Width="Auto"/>
+                </Grid.ColumnDefinitions>
+                <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
+                <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
             Text="°"/>
-         </Grid>
+            </Grid>
 
-         <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
+            <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
             Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
+                <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
-         </Button>
+            </Button>
 
-
-         <Button Name="RemovePartBtn" Grid.ColumnSpan="2" Grid.Row="6"
+            <!--Gestione sfridi-->
+            <Button Name="RemovePartBtn" Grid.ColumnSpan="2" Grid.Row="6"
                  Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-         <Button Name="ScrapsBtn" Grid.Column="3" Grid.Row="6"
+            <Button Name="ScrapsBtn" Grid.Column="3" Grid.Row="6"
                  Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
+            <!--Gestione scarico pezzi-->
+            <Button Name="UnloadPartsBtn" Grid.ColumnSpan="2" Grid.Row="7"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
             <Grid Grid.Row="7" Grid.ColumnSpan="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+            </Grid>
+
+        </Grid>
+
+        <!--Lower button grid, sfondo grigio per coprire i bottoni della pagina sottostante-->
+        <Grid Grid.Column="1" Grid.Row="2" Background="{DynamicResource OmagCut_Gray}">
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="10*"/>
             </Grid.ColumnDefinitions>
-
-         </Grid>
-
-      </Grid>
-
-      <!--Lower button grid, sfondo grigio per coprire i bottoni della pagina sottostante-->
-      <Grid Grid.Column="1" Grid.Row="2" Background="{DynamicResource OmagCut_Gray}">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="10*"/>
-         </Grid.ColumnDefinitions>
             <!-- Inserimento della pausa durante il movimento sulla tavola di scarico-->
             <Button Name="PauseBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
                 <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
         </Grid>
 
-   </Grid>
+    </Grid>
 
 </UserControl>

CadCuts/MoveRawPartPage.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Forms.Integration
+Imports EgtUILib
 
 Public Class MoveRawPartPage
    ' Riferimento alla MainWindow
@@ -35,12 +36,16 @@ Public Class MoveRawPartPage
    Private m_ScrapsVisibility As Visibility = Visibility.Visible
    Private m_CurrRawOnVacuum As Integer = GDB_ID.NULL
 
+   ' definisce se è stata inserito uno scarico 
+   Private m_IsCurrPhaseUnloaded As Boolean = False
+
    Private Sub MoveRawPartPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno testi
       RemovePartBtn.Content = EgtMsg(MSG_MOVERAWPAGEUC + 1)  'Rimuovi
       ModifyBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 17)       'Modifica
       ResetBtn.Content = EgtMsg(MSG_NESTPAGEUC + 6)          'Reset
       ScrapsBtn.Content = "Add Scraps"
+      UnloadPartsBtn.Content = "Move part"
    End Sub
 
    Private Sub MoveRawPartPage_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
@@ -60,7 +65,12 @@ Public Class MoveRawPartPage
       End If
       ' Deseleziono tutto
       EgtDeselectAll()
-      ' Recupero i tagli allungati prima definiti
+      ' resetto variabili di navigazione nelle fasi
+      m_bPrev = False
+      m_bToNext = False
+
+      '---------------------------- CREATE NEW PHASE ----------------------------
+      ' Recupero i tagli ABILITATI prima definiti
       Dim Cuts(0) As Integer
       m_SplitPage.GetEnabledCuts(Cuts)
       ' Fase precedente
@@ -69,11 +79,19 @@ Public Class MoveRawPartPage
       Dim vNewRaws As New List(Of Integer)
       If Not m_SplitPage.m_bShow Then
          SplitRawParts(nPrevPhase, Cuts, vNewRaws)
+         m_IsCurrPhaseUnloaded = False
       Else
-         EgtSetCurrPhase(nPrevPhase + 1)
+         nPrevPhase = nPrevPhase + 1
+         EgtSetCurrPhase(nPrevPhase)
          HideAllMachinings()
+         ' verifico se la fase corrente è di tipo scarico frontale
+         m_nCurrDisposition = EgtGetPhaseDisposition(nPrevPhase)
+         If IsDispUnloadOnAuxTab(m_nCurrDisposition) Then
+            m_SplitPage.m_bOnAuxTab = True
+         End If
       End If
       m_nCurrPhase = EgtGetCurrPhase()
+      '---------------------------- CREATE NEW PHASE ----------------------------
 
       '---------------------------- SCRAPS ----------------------------
       ' gestione visualizzazione del comando "Scraps"
@@ -101,19 +119,31 @@ Public Class MoveRawPartPage
       End If
       '---------------------------- SCRAPS ----------------------------
 
+      '---------------------------- AUX TABLE ---------------------------- 
       ' Se movimento pezzi finale, sistemazioni per tavolo ausiliario
-      If m_SplitPage.m_bOnAuxTab Then
-         ' assegnazione delle info tavola ausiliaria alla dispozione corrente
+      If m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
+         ' assegnazione delle info tavola ausiliaria alla dispozione corrente (Spostato nella funzione Refresh)
          SetAuxTabInCurrDisposition()
+         UnloadPartsBtn.Content = "Go to MOVE part"
          ' altrimenti, aggiorno visualizzazione
-      Else
-         EgtDraw()
+      ElseIf Not m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
+         UnloadPartsBtn.Content = "Go to UNLOAD part"
       End If
+      '---------------------------- AUX TABLE ---------------------------- 
+      EgtDraw()
       ' Carico i parametri di movimento
       m_dStep = GetPrivateProfileDouble(S_RAWMOVE, K_RAWSTEP, 50, m_MainWindow.GetIniFile())
+      ' Carico il valore ci 
+      Dim ExtraStep As Double = GetPrivateProfileDouble(S_RAWMOVE, K_EXTRASTEP, 1, m_MainWindow.GetIniFile())
       ' Ricavo la lunghezza del baffo di taglio 
       m_dStep = SplitAuto.MaxCuttingMustache(m_dStep)
-      StepMoveTxBx.Text = LenToString(m_dStep, 1) & "+1"
+      If ExtraStep < EPS_SMALL Then
+         StepMoveTxBx.Text = LenToString(m_dStep, 1)
+      Else
+         StepMoveTxBx.Text = LenToString(m_dStep, 1) & "+" & LenToString(ExtraStep, 1)
+         ' Aggiorno il valore sommando l'extra
+         m_dStep = m_dStep + ExtraStep
+      End If
       m_dRotation = GetPrivateProfileDouble(S_RAWMOVE, K_RAWROTATION, 30, m_MainWindow.GetIniFile())
       RotationAngleTxBx.Text = DoubleToString(m_dRotation, 3)
       ' Se movimento manuale perpendicolare
@@ -167,6 +197,30 @@ Public Class MoveRawPartPage
 
       ' aggiorno il messaggio del comando per gestire gli sfridi
       VerifyIsNewScrap(m_CurrRawOnVacuum)
+      ' aggiorno la visibilità dei comandi
+      RefreshVisibility()
+      ' salvo l'idice della fase corrente
+      m_nCurrDisposition = EgtGetPhaseDisposition(m_nCurrPhase)
+      ' Abilitazione bottone modifica
+      ModifyBtn.IsEnabled = m_SplitPage.m_bShow
+      ' gestione abilitazione altri bottoni
+      EnableButtons()
+   End Sub
+
+   ' Gestione di visualizzazione dei comandi per il movimento dei pezzi
+   Private Sub RefreshVisibility()
+      ' Aggiorno visulizzazione comando per passare alla pagina di scarico
+      If Not m_SplitPage.m_bEnableOnAuxTab Then
+         UnloadPartsBtn.Visibility = Visibility.Hidden
+      Else
+         UnloadPartsBtn.Visibility = Visibility.Visible
+         If m_SplitPage.m_bOnAuxTab Then
+            UnloadPartsBtn.Content = "Go to MOVE part"
+            ' altrimenti, aggiorno visualizzazione
+         Else
+            UnloadPartsBtn.Content = "Go to UNLOAD part"
+         End If
+      End If
       ' Aggiorno interfaccia per taglio perpendicolare
       If m_bByHand Then
          UpBtn.Visibility = Windows.Visibility.Visible
@@ -222,12 +276,6 @@ Public Class MoveRawPartPage
          ResetBtn.Visibility = Windows.Visibility.Visible
          ScrapsBtn.Visibility = Windows.Visibility.Hidden
       End If
-      ' salvo l'idice della fase corrente
-      m_nCurrDisposition = EgtGetPhaseDisposition(m_nCurrPhase)
-      ' Abilitazione bottone modifica
-      ModifyBtn.IsEnabled = m_SplitPage.m_bShow
-      ' gestione abilitazione altri bottoni
-      EnableButtons()
    End Sub
 
    Private Sub SetAuxTabInCurrDisposition()
@@ -292,15 +340,14 @@ Public Class MoveRawPartPage
                EgtSetStatus(nId, GDB_ST.ON_)
                ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola (evito il controllo se ultima fase)
                If VerifyCollisionWithOtherRawPart(nId) Then
-                     ' mantengo la selezione del pezzo
-                     EgtSetStatus(nId, GDB_ST.SEL)
-                     m_CurrProjPage.SetErrorMessage("Collisione pezzi")
-                  Else
-                     ' Se con ventose, le nascondo
-                     If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(nId, GDB_ST.SEL)
+                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+               Else
+                  ' Se con ventose, le nascondo
+                  If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
                End If
             Else
-
                ' verifico che il pezzo precedente possa essere depositato correttamente
                If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
                   ' mantengo la selezione del pezzo
@@ -310,6 +357,15 @@ Public Class MoveRawPartPage
                   ' esco dal ciclo, prima devo depositare correttamente il pezzo
                   Exit While
                End If
+               ' Verifico che il pezzo corrente sia prelevabile - versione 2.6c3 -
+               If VerifyCollisionWithOtherRawPart(nId, True) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  EgtDraw()
+                  ' esco dal ciclo, prima devo depositare correttamente il pezzo
+                  Exit While
+               End If
                ' salvo l'indice del pezzo correntemente attaccato alle ventose
                m_CurrRawOnVacuum = nId
 
@@ -329,9 +385,15 @@ Public Class MoveRawPartPage
                   VacuumCups.SetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
                   VacuumCups.SetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
                   VacuumCups.SetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
-                  ' se su scarico frontale allora devo modificare la scelta delle ventose
-                  VacuumCups.bUnloadingOnAuxTab = m_SplitPage.m_bOnAuxTab
-                  If PutVacuumCupsOnRaw(nId, rmData) Then
+
+                  VacuumCups.ResetHeadName()
+                  Dim bPutVacuum As Boolean = PutVacuumCupsOnRaw(nId, rmData)
+                  If Not bPutVacuum Then
+                     Dim bTwoHeadVac As Boolean = (EgtGetHeadId(VACUUM_HEAD_2) <> GDB_ID.NULL)
+                     If bTwoHeadVac Then bPutVacuum = PutVacuumCupsOnRaw(nId, rmData)
+                  End If
+
+                  If bPutVacuum Then
                      ' Visualizzo le ventose
                      EgtSetStatus(GetVacuumId(), GDB_ST.ON_)
                      ' Aggiorno i dati
@@ -353,6 +415,8 @@ Public Class MoveRawPartPage
                         m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
                      End If
                   End If
+
+
                End If
             End If
             EgtDraw()
@@ -372,7 +436,7 @@ Public Class MoveRawPartPage
    End Sub
 
    ' Veririfica che il grezzo non entri in colliosione con altri pezzi 
-   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer) As Boolean
+   Private Function VerifyCollisionWithOtherRawPart_0(nIdOnVacumm As Integer) As Boolean
       ' se movimento su tavola di scarico non eseguo il controllo (evito di segnalre errori per pezzi ricavati interni al grezzo...)
       If m_SplitPage.m_bOnAuxTab Then Return False
       If nIdOnVacumm = GDB_ID.NULL Then Return False
@@ -406,6 +470,69 @@ Public Class MoveRawPartPage
       Return False
    End Function
 
+   ' Veririfica che il grezzo non entri in colliosione con altri pezzi - versione 2.6c3 -
+   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer, Optional IsTaking As Boolean = False) As Boolean
+      ' se movimento su tavola di scarico non eseguo il controllo (evito di segnalre errori per pezzi ricavati interni al grezzo...)
+      If m_SplitPage.m_bOnAuxTab Then Return False
+      If nIdOnVacumm = GDB_ID.NULL Then Return False
+      ' Creo gruppo temporaneo in cui generare le superfici per la veririfica di collisione
+      Dim m_nTempId As Integer = EgtCreateGroup(GDB_ID.ROOT)
+      If m_nTempId = GDB_ID.NULL Then Return False
+      EgtSetName(m_nTempId, "RawTemp")
+      ' recupero il contorno del'ID attaccato alle ventose e da questo genero una superificie
+      Dim nIdUpRegionOnVac As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawUpReg")
+      Dim nIdDwnRegionOnVac As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawDwnReg")
+      ' recupero gli ID di tutti i grezzi della fase corrente
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      Dim nRawGroupId = EgtGetParent(EgtGetFirstRawPart())
+      Dim nIdRaw As Integer = EgtGetFirstRawPart()
+      ' ciclo su tutti i grezzi per veririficare eventuali collisioni
+      While nIdRaw <> GDB_ID.NULL
+         ' verifico la fase del grezzo
+         If EgtVerifyRawPartCurrPhase(nIdRaw) And nIdOnVacumm <> nIdRaw Then
+            ' recupero il contorno del pezzo e genero la sua sueperificie
+            Dim nIdUpRegion As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawUpReg")
+            Dim nIdDwnRegion As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawDwnReg")
+            ' creo la copia delle superifici
+            Dim nCopy_IdDwnRegionOnVac As Integer = EgtCopyGlob(nIdDwnRegionOnVac, m_nTempId)
+            Dim nCopy_nIdUpRegion As Integer = EgtCopyGlob(nIdUpRegion, m_nTempId)
+            ' PRELIEVO
+            If EgtSurfFrIntersect(nCopy_IdDwnRegionOnVac, nCopy_nIdUpRegion) Then
+               ' se esite una superficie allora esiste un'intersezione
+               If EgtExistsObj(nCopy_IdDwnRegionOnVac) Then
+                  EgtErase(m_nTempId)
+                  ' Esco: Intersezione TROVATA → true
+                  Return True
+               End If
+            End If
+            If Not IsTaking Then
+               ' DEPOSITO : devono essere esguiti due controlli ulteririori
+               Dim nCopy_IdUpRegionOnVac As Integer = EgtCopyGlob(nIdUpRegionOnVac, m_nTempId)
+               Dim nCopy_nIdDwnRegion As Integer = EgtCopyGlob(nIdDwnRegion, m_nTempId)
+               If EgtSurfFrIntersect(nCopy_IdDwnRegionOnVac, nCopy_nIdDwnRegion) Then
+                  ' se esite una superficie allora esiste un'intersezione
+                  If EgtExistsObj(nCopy_IdDwnRegionOnVac) Then
+                     EgtErase(m_nTempId)
+                     ' Esco: Intersezione TROVATA → true
+                     Return True
+                  End If
+               End If
+               If EgtSurfFrIntersect(nCopy_IdUpRegionOnVac, nCopy_nIdUpRegion) Then
+                  ' se esite una superficie allora esiste un'intersezione
+                  If EgtExistsObj(nCopy_IdUpRegionOnVac) Then
+                     EgtErase(m_nTempId)
+                     ' Esco: Intersezione TROVATA → true
+                     Return True
+                  End If
+               End If
+            End If
+         End If
+         nIdRaw = EgtGetNextRawPart(nIdRaw)
+      End While
+      EgtErase(m_nTempId)
+      Return False
+   End Function
+
    Private Function VerifyIsNewScrap(nMyId As Integer) As Boolean
       Dim nVal As Integer = 0
       If EgtGetInfo(nMyId, K_ISNEWSCRAPS, nVal) Then
@@ -447,7 +574,7 @@ Public Class MoveRawPartPage
             If EgtMoveRawPart(nRawId, dMove * m_vtDir) Then
                m_dCurrDist += Math.Abs(dMove)
             End If
-         ' Altrimenti movimento Y +
+            ' Altrimenti movimento Y +
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, m_dStep, 0)
@@ -490,7 +617,7 @@ Public Class MoveRawPartPage
             If EgtMoveRawPart(nRawId, dMove * m_vtDir) Then
                m_dCurrDist -= Math.Abs(dMove)
             End If
-         ' Altrimenti movimento Y -
+            ' Altrimenti movimento Y -
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, -m_dStep, 0)
@@ -740,6 +867,12 @@ Public Class MoveRawPartPage
       Return bOk
    End Function
 
+   Private Sub RemovePart_KeyCancel(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles m_CurrProjPage.OnKeyCancelDownScene
+      If e.KeyCode = System.Windows.Forms.Keys.Delete Then
+         RemovePartBtn_Click(Nothing, Nothing)
+      End If
+   End Sub
+
    Private Sub RemovePartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemovePartBtn.Click
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
       While nRawId <> GDB_ID.NULL
@@ -782,6 +915,34 @@ Public Class MoveRawPartPage
       End While
    End Sub
 
+   ' Passo dalla pagina di movimento dei pezzi alla pagina di scarico
+   Private Sub UnloadPartBtn_Click() Handles UnloadPartsBtn.Click
+      ' forzo lo stato di scarico frontale oppure di movimento
+      m_SplitPage.m_bOnAuxTab = Not m_SplitPage.m_bOnAuxTab
+
+      ' se rientro nella fase di spostamenti allora nascondo la tavola di scarico
+      If Not m_SplitPage.m_bOnAuxTab Then
+         ' se ci sono pezzi sulla tavola di scarico non posso nasconderla
+         Dim LclLstOfUnldPart As New List(Of Integer)
+         If Not PartOnAuxTab(LclLstOfUnldPart, m_nCurrPhase) Then
+            EgtDisableModified()
+            ' nascondo la tavola di scarico
+            EgtSetStatus(m_nAuxTabId, GDB_ST.OFF)
+            ' Nascondo eventuali pezzi in parcheggio
+            HideParkedParts()
+            EgtEnableModified()
+         End If
+      Else
+         ' Assegnazione delle info tavola ausiliaria alla dispozione corrente
+         SetAuxTabInCurrDisposition()
+      End If
+
+      ' Mantengo la fase che è stata creata e passo a gestire solo la visualizzazione dei bottoni
+      RefreshVisibility()
+      EgtZoom(ZM.ALL, True)
+
+   End Sub
+
    Private Sub StepMoveTxBx_EgtClosed(sender As Object, e As EventArgs) Handles StepMoveTxBx.EgtClosed
       Dim dStep As Double
       If StringToLen(StepMoveTxBx.Text, dStep) Then
@@ -823,16 +984,16 @@ Public Class MoveRawPartPage
       Dim ptRef As Point3d
       If Not EgtGetInfo(nRefId, "Pos", ptRef) Then Return
       Dim sCorn As String = ""
-      EgtGetInfo( nRefId, "COR", sCorn)
-      Select sCorn
-      Case "TL"
-         nCorn = MCH_CR.TL
-      Case "TR"
-         nCorn = MCH_CR.TR
-      Case "BL"
-         nCorn = MCH_CR.BL
-      Case "BR"
-         nCorn = MCH_CR.BR
+      EgtGetInfo(nRefId, "COR", sCorn)
+      Select Case sCorn
+         Case "TL"
+            nCorn = MCH_CR.TL
+         Case "TR"
+            nCorn = MCH_CR.TR
+         Case "BL"
+            nCorn = MCH_CR.BL
+         Case "BR"
+            nCorn = MCH_CR.BR
       End Select
       ' Recupero il centro del grezzo
       Dim ptRawCen As Point3d
@@ -1009,8 +1170,44 @@ Public Class MoveRawPartPage
    End Function
 
    Private Sub PauseBtn_Click(sender As Object, e As RoutedEventArgs) Handles PauseBtn.Click
+      ' verifico la presenza di eventuali pezzi sulla tavola di scarico
+      Dim LclLstOfUnldPart As New List(Of Integer)
+      PartOnAuxTab(LclLstOfUnldPart, m_nCurrPhase)
+      If Not InsertPauseInCurrPhase() Then Return
+      AddNewPhase()
+   End Sub
+
+   ' restituisce la lista dei pezzi che sono sulla tavola di scarico nella fase indicata
+   Private Function PartOnAuxTab(ByRef ListOfUnloadedPatr As List(Of Integer), nPhase As Integer) As Boolean
+      m_IsCurrPhaseUnloaded = False
+      ' Area tavolo ausiliario
+      Dim b3AuxTab As New BBox3d
+      EgtGetBBoxGlob(EgtGetFirstNameInGroup(m_nAuxTabId, "A1"), GDB_BB.STANDARD, b3AuxTab)
+      ' Area pezzi 
+      Dim nOtherRaw As Integer = EgtGetFirstRawPart()
+      While nOtherRaw <> GDB_ID.NULL
+         If EgtVerifyRawPartPhase(nOtherRaw, nPhase) Then
+            Dim b3OtherRaw As New BBox3d
+            ' EgtGetRawPartBBox(nOtherRaw, b3OtherRaw)
+            EgtGetBBoxGlob(nOtherRaw, GDB_BB.STANDARD, b3OtherRaw)
+            ' se il centro del pezzo è sulla tavola di scarico
+            If b3OtherRaw.Center.y < b3AuxTab.Max().y Then
+               m_IsCurrPhaseUnloaded = True
+               ListOfUnloadedPatr.Add(nOtherRaw)
+               ' salvo l'info che indica che il pezzo deve essere scaricato
+               EgtSetInfo(nOtherRaw, "Unloaded", 1)
+               'Exit While
+            End If
+         End If
+         nOtherRaw = EgtGetNextRawPart(nOtherRaw)
+      End While
+      Return m_IsCurrPhaseUnloaded
+   End Function
+
+   ' inserisce una pausa nella fase corrente
+   Private Function InsertPauseInCurrPhase() As Boolean
       ' verifico che ci sia almeno un elemto selezionato (dati di aggancio pezzo)
-      If m_RawMoveDataList.Count = 0 Then Return
+      If m_RawMoveDataList.Count = 0 Then Return False
       ' verifico che sia stato inseito almeno uno spostamento, altrimenti lo rimuovo
       Dim Index As Integer = 0
       For Index = m_RawMoveDataList.Count - 1 To 0 Step -1
@@ -1019,8 +1216,9 @@ Public Class MoveRawPartPage
          End If
       Next
       ' verifico che la lista non sia vuota
-      If m_RawMoveDataList.Count = 0 Then Return
-
+      If m_RawMoveDataList.Count = 0 Then
+         Return False
+      End If
       ' recupero disposizione fase corrente
       Dim nDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
       ' imposto la pausa nella disposizione corrente
@@ -1028,30 +1226,22 @@ Public Class MoveRawPartPage
       ' aggiungo al gruppo disposizione dei sottogruppi con i dati di movimento dei grezzi spostati
       SaveMoveInfoInDisposition(nDispId, m_RawMoveDataList)
       ' imposto eventuale movimento pezzi su tavola ausiliaria
-      SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
+      SaveMovePartsOnAuxTable(nDispId, m_IsCurrPhaseUnloaded)
+      ' SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
       '' Eseguo calcolo speciale dei movimenti: per tavola multicut
       'SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
+      SaveRemoveByHandInDisposition(nDispId, False)
+      Return True
+   End Function
 
+   ' crea una nuvoa fase/disposizione, la rende corrente, ricalcolo i grezzi e le lavorazioni della nuova fase
+   Private Function AddNewPhase() As Boolean
       ' Creo nuova fase
       Dim nNewPhase As Integer = EgtAddPhase()
-
-      ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
-      Dim nRawId As Integer = EgtGetFirstRawPart()
-      While nRawId <> GDB_ID.NULL
-         ' se il grezzo è presente nella fase precedente e non è quello selezionato allora procedo a creare una copia nella nuova fase
-         If EgtVerifyRawPartPhase(nRawId, nNewPhase - 1) Then
-            Dim bKeepRawPart As Boolean = True
-            For Each RawOnAuxTabData As RawMoveData In m_RawMoveDataList
-               If nRawId = RawOnAuxTabData.m_nId Then
-                  bKeepRawPart = False
-                  Exit For
-               End If
-            Next
-            If bKeepRawPart Then EgtKeepRawPart(nRawId, nNewPhase - 1)
-         End If
-         ' passo al successivo grezzo
-         nRawId = EgtGetNextRawPart(nRawId)
-      End While
+      ' Carico i grezzi rimasti sulla tavola nella nuova fase
+      ChangePhaseRawPart(nNewPhase)
+      ' Sposto le lavorazioni rimaste nella nuova fase
+      ChangeOperationPhase(nNewPhase)
 
       Dim nCurrDisposition As Integer = EgtGetPhaseDisposition(nNewPhase)
       'SetPause(nCurrDisposition)
@@ -1062,8 +1252,43 @@ Public Class MoveRawPartPage
       SetAuxTabInCurrDisposition()
       ' ripulisco la lista degli spostamenti
       m_RawMoveDataList.Clear()
+      m_IsCurrPhaseUnloaded = False
       ' aggiorno la fase corrente
       m_nCurrPhase = EgtGetCurrPhase()
+      Return True
+   End Function
+
+   ' Copio i grezzi rimasti sulla tavola nella fase successiva
+   Private Sub ChangePhaseRawPart(ByVal nNewPhase As Integer)
+      ' recupero l'elenco dei pezzi che sono stati scaricati sulla tavola
+      Dim LocalLstOfUnldPart As New List(Of Integer)
+      PartOnAuxTab(LocalLstOfUnldPart, nNewPhase - 1)
+      ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
+      Dim nRawId As Integer = EgtGetFirstRawPart()
+      While nRawId <> GDB_ID.NULL
+         ' se il grezzo è presente nella fase precedente e non è quello selezionato allora procedo a creare una copia nella nuova fase
+         If EgtVerifyRawPartPhase(nRawId, nNewPhase - 1) Then
+            Dim bKeepRawPart As Boolean = True
+            For Each RawOnAuxTabData As RawMoveData In m_RawMoveDataList
+               If nRawId = RawOnAuxTabData.m_nId Then
+                  ' se il pezzo è stato scaricato allora non deve essere riportato nella fase successiva
+                  For Each UnloadPart As Integer In LocalLstOfUnldPart
+                     If nRawId = UnloadPart Then
+                        ' salvo l'info che indica che il pezzo deve essere scaricato
+                        EgtSetInfo(nRawId, "Unloaded", 1)
+                        bKeepRawPart = False
+                        Exit For
+                     End If
+                  Next
+                  'bKeepRawPart = False
+                  Exit For
+               End If
+            Next
+            If bKeepRawPart Then EgtKeepRawPart(nRawId, nNewPhase - 1)
+         End If
+         ' passo al successivo grezzo
+         nRawId = EgtGetNextRawPart(nRawId)
+      End While
    End Sub
 
    Private Sub ResetBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetBtn.Click
@@ -1079,6 +1304,8 @@ Public Class MoveRawPartPage
       EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAngRaw)
       AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
       RemoveRawMoveData(nRawId, m_RawMoveDataList)
+      ' elimino l'info che indica che il pezzo è scaricato sulla tavola
+      EgtRemoveInfo(nRawId, "Unloaded")
       ' Disabilito pezzo e nascondo le ventose
       EgtSetStatus(nRawId, GDB_ST.ON_)
       EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
@@ -1111,6 +1338,14 @@ Public Class MoveRawPartPage
          m_nCurrPhase -= 1
          m_bPrev = False
          m_SplitPage.m_bShow = True
+         m_SplitPage.m_bOnAuxTab = True
+         ' imposto la visibilità della tavola ausiliaria
+         SetAuxTabInCurrDisposition()
+         ' carico le info di disposizione dei pezzi
+         m_RawMoveDataList.Clear()
+         m_bRemovedRaw = GetRemoveByHandInDisposition(m_nCurrDisposition)
+         GetMoveInfoInDisposition(m_nCurrDisposition, m_RawMoveDataList)
+         RefreshVisibility()
          EgtDraw()
          Return
       End If
@@ -1141,18 +1376,53 @@ Public Class MoveRawPartPage
          Return
       End If
 
-      ' se la disposizione corrente è sulla tavola ausiliaria allora lo sarà anche quella successiva
-      If IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 Then
-         EgtSetCurrPhase(m_nCurrPhase + 1)
-         m_nCurrDisposition = EgtGetNextOperation(m_nCurrDisposition)
-         m_nCurrPhase += 1
-         m_bToNext = False
-         m_SplitPage.m_bShow = True
-         EgtDraw()
-         EnableButtons()
-         Return
+      ' ------- VISUALIZZAZIONE (navigazione tra le fasi) -------
+      If m_SplitPage.m_bShow Then
+         ' verifico se la fase successiva è uno scarico frontale
+         If NextOperationIsUnloading(m_nCurrDisposition) Then
+            ' imposto la nuova fase (che è stata modificata all'interno della funzione di controllo)
+            EgtSetCurrPhase(m_nCurrPhase)
+            ' carico i dati di movimento dei pezzi nella fase corrente
+            m_RawMoveDataList.Clear()
+            m_bRemovedRaw = GetRemoveByHandInDisposition(m_nCurrDisposition)
+            GetMoveInfoInDisposition(m_nCurrDisposition, m_RawMoveDataList)
+            EgtDraw()
+            EnableButtons()
+            Return
+         ElseIf IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 AndAlso Not NextOperationIsUnloading(m_nCurrDisposition) Then
+            ' imposto la nuova fase, al termine della Sub verrà caricata la pagina Split nella fase indicata ora
+            m_bToNext = True
+            m_nCurrPhase += 1
+            EgtSetCurrPhase(m_nCurrPhase)
+            EgtDraw()
+         End If
       End If
 
+      ' -------     MODIFICA    -------
+      If Not m_SplitPage.m_bShow Then
+         ' se la tavola di scarico presente oppure ci sono pezzi sulla tavola di scarico
+         Dim LclLstOfUnldPart As New List(Of Integer)
+         If m_SplitPage.m_bOnAuxTab Or PartOnAuxTab(LclLstOfUnldPart, m_nCurrPhase) Then
+            ' se ci sono pezzi sulla tavola di scarico prima di procedere inserisco una pausa e creo una nuoava fase
+            If m_IsCurrPhaseUnloaded AndAlso InsertPauseInCurrPhase() Then AddNewPhase()
+            ' nascondo la tavola di scarico
+            EgtDisableModified()
+            EgtSetStatus(m_nAuxTabId, GDB_ST.OFF)
+            EgtEnableModified()
+         End If
+         m_bToNext = True
+         '' se la disposizione corrente è sulla tavola ausiliaria allora lo sarà anche quella successiva
+         'If IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 Then
+         '   EgtSetCurrPhase(m_nCurrPhase + 1)
+         '   m_nCurrDisposition = EgtGetNextOperation(m_nCurrDisposition)
+         '   m_nCurrPhase += 1
+         '   m_bToNext = False
+         '   m_SplitPage.m_bShow = True
+         '   EgtDraw()
+         '   EnableButtons()
+         '   Return
+         'End If
+      End If
       ' resetto l'inidice del pezzo da mnovimentare
       m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
@@ -1195,7 +1465,7 @@ Public Class MoveRawPartPage
       ' disabilito bottone
       ModifyBtn.IsEnabled = False
       ' gestione abilitazione altri bottoni
-      EnableButtons()
+      EnableButtons(MachiningList.Count > 0)
    End Sub
 
    ' verifica se la disposizione indicata è uno scarico sulla tavola ausiliaria
@@ -1206,6 +1476,20 @@ Public Class MoveRawPartPage
       Return bVal
    End Function
 
+   ' restituisce e attiva la successiva disposizione se è uno scarico frontale
+   Public Function NextOperationIsUnloading(nCurrDispId As Integer) As Boolean
+      ' recupero la primo operazione successiva
+      Dim nNextIdOperation As Integer = EgtGetNextOperation(nCurrDispId)
+      ' a partire da questa cerco la prima disposizione disponibile
+      Dim nNextIdDips As Integer = GetNextDisposition(nNextIdOperation)
+      If nNextIdDips = nNextIdOperation And IsDispUnloadOnAuxTab(nNextIdOperation) Then
+         m_nCurrPhase += 1
+         m_nCurrDisposition = nNextIdOperation
+         Return True
+      End If
+      Return False
+   End Function
+
    ' recupero la prima disposizione disponibile tra l'elenco delle operazioni presenti
    Public Function GetNextDisposition(nCurrDisposId As Integer) As Integer
       Dim nDispId As Integer = nCurrDisposId
@@ -1218,7 +1502,7 @@ Public Class MoveRawPartPage
       Return GDB_ID.NULL
    End Function
 
-   Private Sub EnableButtons()
+   Private Sub EnableButtons(Optional bExistsMachining As Boolean = False)
       UpBtn.IsEnabled = Not m_SplitPage.m_bShow
       LeftBtn.IsEnabled = Not m_SplitPage.m_bShow
       RightBtn.IsEnabled = Not m_SplitPage.m_bShow
@@ -1234,19 +1518,39 @@ Public Class MoveRawPartPage
       BottomRBtn.IsEnabled = Not m_SplitPage.m_bShow
       PauseBtn.IsEnabled = Not m_SplitPage.m_bShow
       ResetBtn.IsEnabled = Not m_SplitPage.m_bShow
+      UnloadPartsBtn.IsEnabled = Not m_SplitPage.m_bShow
       If m_SplitPage.m_bShow Then
-         NextBtn.IsEnabled = (m_nCurrPhase < EgtGetPhaseCount())
+         ' se ultima fase (e non sacrico su tavola)
+         If m_nCurrPhase = EgtGetPhaseCount() And m_SplitPage.m_bOnAuxTab Then
+            NextBtn.IsEnabled = (m_nCurrPhase < EgtGetPhaseCount())
+         Else
+            NextBtn.IsEnabled = (m_nCurrPhase <= EgtGetPhaseCount())
+         End If
       Else
-         NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
+         ' Se esistono delle lavorazioni allora abilito il pulsante per procedere
+         If Not bExistsMachining Then
+            NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
+         Else
+            NextBtn.IsEnabled = True
+         End If
       End If
    End Sub
 
+   ' esco dalla pagina di scarico
    Private Sub MoveRawPartPage_Unloaded(sender As Object, e As EventArgs) Handles Me.Unloaded
       ' verifico che la fase corrente non sia vuota
       Dim nLastDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
-      If EgtIsOperationEmpty(nLastDispId) And m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
-         EgtErase(nLastDispId)
-      End If
+
+      '' se sono in visualizzazione allora non elimino essuna operazione
+      'If Not m_SplitPage.m_bShow Then
+      '   If EgtIsOperationEmpty(nLastDispId) And Not m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
+      '      EgtErase(nLastDispId)
+      '   ElseIf EgtIsOperationEmpty(nLastDispId) And m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
+      '      ' Dichiaro pagina non attiva
+      '      m_bActive = False
+      '      Return
+      '   End If
+      'End If
 
       ' Se movimento con ventose
       If Not m_bByHand Then
@@ -1262,8 +1566,9 @@ Public Class MoveRawPartPage
             SaveMoveInfoInDisposition(nDispId, m_RawMoveDataList)
             ' imposto eventuale presenza rimozioni manuali
             SaveRemoveByHandInDisposition(nDispId, m_bRemovedRaw)
-            ' imposto eventuale movimento pezzi su tavola ausiliaria
-            SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
+            ' imposto eventuale movimento pezzi su tavola ausiliaria (se è realmente avvenuto)
+            'SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)            
+            SaveMovePartsOnAuxTable(nDispId, m_IsCurrPhaseUnloaded)
             ' Eseguo calcolo speciale dei movimenti
             SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
          End If
@@ -1279,13 +1584,18 @@ Public Class MoveRawPartPage
             SpecialApplyDisposition(nDispId, True)
          End If
       End If
+
       ' Nascondo eventuale tavola ausiliaria
       If m_SplitPage.m_bOnAuxTab Then
          EgtDisableModified()
          EgtSetStatus(m_nAuxTabId, GDB_ST.OFF)
          EgtEnableModified()
-         EgtZoom(ZM.ALL, False)
-         If Not m_bPrev Then
+         ' se sto uscendo dalla pagina delle spezzature
+         If Not m_bPrev And Not m_bToNext Then
+            Dim nDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+            ' se sto uscendo dalla pagina split (senza passare dal comando next) 
+            Dim lclLstUnlPart As New List(Of Integer)
+            SaveMovePartsOnAuxTable(nDispId, PartOnAuxTab(lclLstUnlPart, m_nCurrPhase))
             ' Cancello eventuale manipolatore pezzi
             EgtDisableModified()
             RemoveVacuumCups()
@@ -1302,10 +1612,30 @@ Public Class MoveRawPartPage
          m_bPrev = False
          m_SplitPage.m_bShow = True
       End If
+
+      Dim Ph As Integer = EgtGetCurrPhase()
+      ' aggiorno il disegno
+      EgtZoom(ZM.ALL, False)
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
 
+   ' ----------------- TEST funzione per debug operazioni  -----------------
+   Private Sub SaveMyFileTest(sFilename As String)
+      LoadCurrPhaseMachining()
+      ' salvo il file corrente per poterlo studiare e capire cosa è successo nella rappresentazione dei grezzi
+      EgtSaveFile("C:\EgtData\OmagCUT\MyProjects\" & sFilename & ".nge", NGE.BIN)
+   End Sub
+
+   Private Sub LoadCurrPhaseMachining()
+      Dim m_MachiningList As New List(Of SplitMach)
+      'm_SplitPage.ShowMachiningList()
+      'm_SplitPage.SaveOrderMachinig(m_nCurrPhase)
+      ' Preparo la lista delle lavorazioni
+      CalculateSplitMachList(m_nCurrPhase, m_MachiningList)
+      Dim b As Boolean = False
+   End Sub
+
 End Class
 
 

CadCuts/NestPageUC.xaml

@@ -12,7 +12,7 @@
       <Grid.ColumnDefinitions>
          <ColumnDefinition Width="3*"/>
          <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
+        </Grid.ColumnDefinitions>
       <Grid.RowDefinitions>
          <RowDefinition Height="1*"/>
          <RowDefinition Height="8*"/>
@@ -100,7 +100,32 @@
                VerticalAlignment="Center" />
          </Button>
 
-            <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3" >
+          <!--Comandi attivi solo in madalità REG-->
+            <UniformGrid Name ="UG0_Reg" Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="3" Visibility="Hidden">
+                <ToggleButton Name="AddPointRegBtn" Visibility="Hidden"
+                              Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource RefTabImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="ModPointRegBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Move-Spot-RegImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="RemovePointRegBtn" Visibility="Hidden"
+                              Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource RefTabImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
+
+            <!--Comandi attivi solo in madalità REG-->
+            <UniformGrid Name ="UG1_Reg" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" Visibility="Hidden">
+                <Button Name="AdjustPointRegBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Muovi-grezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <ToggleButton Name="ActivatePointRegBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource ON_OFF-REGImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
+
+            <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3">
                 <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Inserisci-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
@@ -124,29 +149,31 @@
                 </ToggleButton>
             </UniformGrid>
 
-            <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
+            <UniformGrid Name ="UG2" Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="3" >
                 <Button Name="SelectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Seleziona-tuttoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
                 <Button Name="DeselectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Deseleziona-tuttoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
-         </UniformGrid>
+                <ToggleButton Name="ParkIndBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Name="ParkIndImg" Source="{DynamicResource ParkingImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
 
       </Grid>
 
       <!--LowerButtonGrid-->
-      <Grid Grid.Column="2" Grid.Row="2">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="5*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
-         </Grid.ColumnDefinitions>
+        <Grid Grid.Column="2" Grid.Row="2">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+            </Grid.ColumnDefinitions>
 
-      </Grid>
-
-   </Grid>
+        </Grid>
+    </Grid>
    
 </UserControl>

CadCuts/SelParkIndWD.xaml

@@ -0,0 +1,97 @@
+<UserControl x:Class="SelParkIndWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Background="Transparent">
+
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.1*"/>
+                <ColumnDefinition Width="10*"/>
+                <ColumnDefinition Width="0.1*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.0*"/>
+                <RowDefinition Height="0.1*"/>
+                <RowDefinition Height="10*"/>
+                <RowDefinition Height="0.1*"/>
+                <RowDefinition Height="0.0*"/>
+            </Grid.RowDefinitions>
+
+            <TextBlock Name="FilePathTxBl" Grid.Column="1" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" 
+                       Visibility="Collapsed"/>
+            <!--TextAlignment="Center"
+               FontSize="20"
+               VerticalAlignment="Center"-->
+            <ListBox Name="ParkIndListBox" Grid.Column="1" Grid.Row="2"
+                     ItemsSource="{Binding ItemList}" ScrollViewer.CanContentScroll="False" ScrollViewer.HorizontalScrollBarVisibility="Hidden">
+                <ListBox.ItemTemplate>
+                    <DataTemplate>
+                        <StackPanel Orientation="Vertical" >
+                            <UniformGrid Columns="2"  Visibility="{Binding TitleVisibility}">
+                                <StackPanel Orientation="Horizontal">
+                                    <Image Source="{Binding ImgTab}" Height="20" Stretch="Uniform"/>
+                                    <TextBlock Text="{Binding CountInTab}" Height="20" Width="30">
+                                        <TextBlock.Style>
+                                            <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_ListBoxTextBlock}">
+                                                <Style.Triggers>
+                                                    <DataTrigger Binding="{Binding IsStatusON}" Value="False">
+                                                        <Setter Property="FontStyle" Value="Oblique"/>
+                                                        <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                                                    </DataTrigger>
+                                                    <DataTrigger Binding="{Binding IsStatusON}" Value="True">
+                                                        <Setter Property="Foreground" Value="black"/>
+                                                    </DataTrigger>
+                                                </Style.Triggers>
+                                            </Style>
+                                        </TextBlock.Style>
+                                    </TextBlock>
+                                </StackPanel>
+                                <StackPanel Orientation="Horizontal">
+                                    <Image Source="{Binding ImgPark}" Height="20" Stretch="Uniform"/>
+                                    <TextBlock Text="{Binding CountInPark}" Height="20" Width="30">
+                                        <TextBlock.Style>
+                                            <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_ListBoxTextBlock}">
+                                                <Style.Triggers>
+                                                    <DataTrigger Binding="{Binding IsStatusON}" Value="False">
+                                                        <Setter Property="FontStyle" Value="Oblique"/>
+                                                        <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                                                    </DataTrigger>
+                                                    <DataTrigger Binding="{Binding IsStatusON}" Value="True">
+                                                        <Setter Property="Foreground" Value="black"/>
+                                                    </DataTrigger>
+                                                </Style.Triggers>
+                                            </Style>
+                                        </TextBlock.Style>
+                                    </TextBlock>
+                                </StackPanel>
+                            </UniformGrid>
+                            <Image Source="{Binding Img}" Width="120" Stretch="Uniform" Visibility="{Binding MyVisibilityImg}"/>
+                                <Viewbox Name="ViewBoxPark" Visibility="{Binding MyVisibilitySvg}">
+                                <ContentPresenter Content="{Binding LocalMyCanvas.CurrCanvas}"/>
+                            </Viewbox>
+                        </StackPanel>
+                    </DataTemplate>
+                </ListBox.ItemTemplate>
+            </ListBox>
+
+            <Grid Grid.Column="1" Grid.Row="4" Visibility="Collapsed">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+</UserControl>

CadCuts/SelParkIndWD.xaml.vb

@@ -0,0 +1,920 @@
+Imports System.ComponentModel
+Imports System.Globalization
+Imports System.Windows.Ink
+Imports System.Xml
+Imports EgtUILib
+Imports OmagCUT.NestPageUC
+
+Public Class SelParkIndWD
+
+   Private Shared m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_nCtx As Integer = -1
+   Public Const nIndAllOff As Integer = 999
+
+   Public Shared sActualProj As String = String.Empty
+
+   Private m_ParkIndList As New List(Of ParkInd)
+   Public Property ParkIndList As List(Of ParkInd)
+      Get
+         Return m_ParkIndList
+      End Get
+      Set(value As List(Of ParkInd))
+         m_ParkIndList = value
+      End Set
+   End Property
+
+   Sub New(Owner As Window, Optional nCtx As Integer = -1)
+      'Me.Owner = Owner
+      InitializeComponent()
+      If nCtx > -1 Then m_nCtx = nCtx
+   End Sub
+
+   Public Sub Me_Laoded() Handles Me.Loaded
+      ' Aggiorno la lista
+      UpdateList()
+      ' Imposto la selezione del primo parcheggio disponibile
+      UpdateDefaultSelection()
+   End Sub
+
+   Public Sub UpdateList()
+      ' Carico lista dei pezzi
+      LoadParkInd(m_ParkIndList, m_nCtx)
+      ParkIndListBox.ItemsSource = m_ParkIndList
+      UpdateDefaultSelection()
+      ' Forzo l'aggiornamento della grafica
+      ParkIndListBox.Items.Refresh()
+   End Sub
+
+   Public Sub UpdateDefaultSelection()
+      ' Procedo a selezionare il primo (E FORSE ANCHE L'UNICO?) parcheggio attivo
+      Dim bFound As Boolean = False
+      For Each ItemPark As ParkInd In m_ParkIndList
+         If ItemPark.IsStatusON Then
+            ParkIndListBox.SelectedItem = ItemPark
+            bFound = True
+            Exit For
+         End If
+      Next
+      If Not bFound And m_ParkIndList.Count > 0 Then
+         m_ParkIndList(0).Status = GDB_ST.ON_
+         ParkIndListBox.SelectedItem = m_ParkIndList(0)
+      End If
+      '' Provedo a spegnere tutti gli altri parcheggi
+      'For Each ItemParkInd As ParkInd In m_ParkIndList
+      '   If ParkIndListBox.SelectedItem.Ind <> ItemParkInd.Ind Then
+      '      ItemParkInd.Status = GDB_ST.OFF
+      '      SetStatusPartInParkInd(ItemParkInd)
+      '   End If
+      'Next
+   End Sub
+
+   Private Sub ParkIndListBox_SelectionChanged() Handles ParkIndListBox.MouseLeftButtonUp
+      ' Non so se il click sta accendeno o spegnendo quinid faccio una verifica dello stato attuale del parcheggio
+      Dim localParkInd As ParkInd = ParkIndListBox.SelectedItem
+      ' Se l'elemento selezionato è attivo allora esco (perchè altrimenti lo spegnerei)
+      If localParkInd.IsStatusON Then Return
+      Dim bFound As Boolean = False
+      If localParkInd.Ind = nIndAllOff Then
+         localParkInd.Status = GDB_ST.ON_
+         bFound = True
+      End If
+      Dim nPartId As Integer = EgtGetFirstPart()
+      ' Cerco il primo pezzo del parcheggio indicato
+      While nPartId <> GDB_ID.NULL And Not bFound
+         Dim sInfoParkInd As String = String.Empty
+         ' Se i pezzi non hanno un indice di parcheggio di default vale "0"
+         If Not EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then sInfoParkInd = "0"
+         If localParkInd.Ind.ToString = sInfoParkInd Then
+            ' Determino lo stato da assegnare al parcheggio (prendo il primo pezzo del parcheggio come riferimento)
+            Dim OppositStat As Integer = If(localParkInd.Status = GDB_ST.ON_, GDB_ST.OFF, GDB_ST.ON_)
+            localParkInd.Status = OppositStat
+            bFound = True
+            ' termino la ricerca
+            Exit While
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      ' Assegno lo stato del parcheggio a tutti i pezzi i parcheggio
+      If bFound Then
+         SetStatusPartInParkInd(localParkInd, True, m_nCtx)
+      Else
+         ' Significa che i pezzi sono tutti in macchina: quindi i pezzi sono (SICURAMENTE?) accesi
+         Dim OppositStat As Integer = If(localParkInd.Status = GDB_ST.ON_, GDB_ST.OFF, GDB_ST.ON_)
+         localParkInd.Status = OppositStat
+         SetStatusPartInParkInd(localParkInd, True, m_nCtx)
+      End If
+      ' Se accendo un parcheggio procedo a spegnere tutto gli atri
+      If localParkInd.Status = GDB_ST.ON_ Then
+         For Each ItemParkInd As ParkInd In m_ParkIndList
+            If localParkInd.Ind <> ItemParkInd.Ind Then
+               ItemParkInd.Status = GDB_ST.OFF
+               SetStatusPartInParkInd(ItemParkInd, True, m_nCtx)
+            End If
+         Next
+      End If
+      EgtZoom(ZM.ALL)
+   End Sub
+
+#Region "METODI SHARED per gestione della lista parcheggi"
+
+   ' Restituisce il primo indice di parcheggio libero
+   Public Shared Function NewParkInd(Optional nCtx As Integer = -1) As Integer
+      ' recupero il contesto corrente
+      Dim CurrCtx As Integer = EgtGetCurrentContext()
+      ' recupero il contesto del progetto
+      Dim ProjCtx As Integer = m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx()
+      If nCtx > -1 Then ProjCtx = nCtx
+      EgtSetCurrentContext(ProjCtx)
+      Dim LastParkInd As Integer = 0
+      Dim nRawId As Integer = GetCurrentRaw()
+      ' Leggo l'indice di parcheggio dei pezzi in tavola
+      Dim nPartId As Integer = EgtGetFirstGroupInGroup(nRawId)
+      While nPartId <> GDB_ID.NULL
+         ' Se i pezzi non hanno un indice di parcheggio
+         Dim sInfoParkInd As String = String.Empty
+         If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+            If IsNumeric(sInfoParkInd) Then
+               Dim nInfoParkIndn As Integer = CInt(sInfoParkInd)
+               LastParkInd = Math.Max(LastParkInd, nInfoParkIndn)
+            End If
+         End If
+         nPartId = EgtGetNextGroup(nPartId)
+      End While
+      ' Leggo l'indice di parcheggio dei pezzi in parcheggio
+      nPartId = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         ' Se i pezzi non hanno un indice di parcheggio (COPIA della funzione sopra)
+         Dim sInfoParkInd As String = String.Empty
+         If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+            If IsNumeric(sInfoParkInd) Then
+               Dim nInfoParkIndn As Integer = CInt(sInfoParkInd)
+               LastParkInd = Math.Max(LastParkInd, nInfoParkIndn)
+            End If
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      ' Ripristino il contesto corrente
+      EgtSetCurrentContext(CurrCtx)
+      Return LastParkInd + 1
+   End Function
+
+   ' Gestisce lo stato dei pezzi associati al parcheggio indicato
+   Public Shared Sub SetStatusPartInParkInd(localParkInd As ParkInd, Optional bDraw As Boolean = True, Optional nCtx As Integer = -1)
+      If IsNothing(localParkInd) Then Return
+      ' recupero il contesto corrente
+      Dim CurrCtx As Integer = EgtGetCurrentContext()
+      ' recupero il contesto del progetto
+      Dim ProjCtx As Integer = m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx()
+      If nCtx > -1 Then ProjCtx = nCtx
+      EgtSetCurrentContext(ProjCtx)
+      Dim nRawId As Integer = GetCurrentRaw()
+      ' Pezzi in tavola
+      Dim nPartId As Integer = EgtGetFirstGroupInGroup(nRawId)
+      While nPartId <> GDB_ID.NULL
+         Dim sInfoParkInd As String = String.Empty
+         If Not EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then sInfoParkInd = "0"
+         If localParkInd.Ind.ToString = sInfoParkInd Then
+            ' Salvo lo stato del parcheggio (per gestire la navigazione) ANCHE SE I PEZZI SONO ACCESI
+            EgtSetInfo(nPartId, INFO_PARKSTATUS, localParkInd.Status)
+         End If
+         nPartId = EgtGetNextGroup(nPartId)
+      End While
+      ' Pezzi in parcheggio
+      nPartId = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim sInfoParkInd As String = String.Empty
+         If Not EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then sInfoParkInd = "0"
+         If localParkInd.Ind.ToString = sInfoParkInd Then
+            ' Setto lo stato
+            EgtSetStatus(nPartId, localParkInd.Status)
+            ' Salvo lo stato (per gestire la navigazione)
+            EgtSetInfo(nPartId, INFO_PARKSTATUS, localParkInd.Status)
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      If bDraw Then EgtDraw()
+      ' Ripristino il contesto corrente
+      EgtSetCurrentContext(CurrCtx)
+   End Sub
+
+   ' Restituuisce la lista dei parcheggi del progetto corrente
+   Public Shared Sub LoadParkInd(P_List As List(Of ParkInd), Optional nCtx As Integer = -1)
+      If IsNothing(P_List) Then Return
+      P_List.Clear()
+      P_List.Add(New ParkInd(nIndAllOff, "All off", 0))
+      ' recupero il contesto corrente
+      Dim CurrCtx As Integer = EgtGetCurrentContext()
+      ' recupero il contesto del progetto
+      Dim ProjCtx As Integer = m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx()
+      If nCtx > -1 Then ProjCtx = nCtx
+      EgtSetCurrentContext(ProjCtx)
+      Dim nRawId As Integer = GetCurrentRaw()
+      ' Pezzi in tavola
+      Dim nPartId As Integer = EgtGetFirstGroupInGroup(nRawId)
+      While nPartId <> GDB_ID.NULL
+         Dim sInfoParkInd As String = String.Empty
+         Dim nInfoParkInd As Integer = -1
+         ' Recupero l'indice del parcheggio
+         If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+            nInfoParkInd = If(IsNumeric(sInfoParkInd), CInt(sInfoParkInd), -1)
+         Else
+            nInfoParkInd = 0
+         End If
+         ' Se l'indice di parcheggio restituito è valido (Maggiore di -1)
+         If nInfoParkInd > -1 Then
+            ' Verifico se nella lista dei parcheggi è già presente l'indice indicato
+            Dim localParkInd As ParkInd = P_List.Find(Function(x) x.Ind = nInfoParkInd)
+            ' Se non trovo nessun parcheggio con questo indice allora lo aggiungo
+            If IsNothing(localParkInd) Then
+               Dim nStatus As Integer
+               If Not EgtGetInfo(nPartId, INFO_PARKSTATUS, nStatus) Then nStatus = GDB_ST.ON_
+               ' EgtGetStatus(nPartId, nStatus)
+               P_List.Add(New ParkInd(nInfoParkInd, "Park_" & nInfoParkInd.ToString, nStatus))
+            End If
+         End If
+         nPartId = EgtGetNextGroup(nPartId)
+      End While
+      ' Pezzi in parcheggio
+      nPartId = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim sInfoParkInd As String = String.Empty
+         Dim nInfoParkInd As Integer = -1
+         ' Recupero l'indice del parcheggio
+         If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+            nInfoParkInd = If(IsNumeric(sInfoParkInd), CInt(sInfoParkInd), -1)
+         Else
+            nInfoParkInd = 0
+         End If
+         ' Se l'indice di parcheggio restituito è valido (Maggiore di -1)
+         If nInfoParkInd > -1 Then
+            ' Verifico se nella lista dei parcheggi è già presente l'indice indicato
+            Dim localParkInd As ParkInd = P_List.Find(Function(x) x.Ind = nInfoParkInd)
+            ' Se non trovo nessun parcheggio con questo indice allora lo aggiungo
+            If IsNothing(localParkInd) Then
+               Dim nStatus As Integer
+               If Not EgtGetInfo(nPartId, INFO_PARKSTATUS, nStatus) Then nStatus = GDB_ST.ON_
+               ' EgtGetStatus(nPartId, nStatus)
+               P_List.Add(New ParkInd(nInfoParkInd, "Park_" & nInfoParkInd.ToString, nStatus))
+            End If
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtSetCurrentContext(CurrCtx)
+   End Sub
+
+   ' Aggiorna la lista dei parcheggi, se "bDraw=true" aggiorno la scena
+   Public Shared Sub UpdateViewOnParkInd(Optional bDraw As Boolean = True)
+      ' Ricarico la lista dei parcheggi
+      Dim ListParkInd As New List(Of ParkInd)
+      SelParkIndWD.LoadParkInd(ListParkInd)
+      ' Aggiorna la vista dei parcheggi
+      For Each Item As ParkInd In ListParkInd
+         SelParkIndWD.SetStatusPartInParkInd(Item, bDraw)
+      Next
+   End Sub
+
+   ' Restituisce il primo parcheggio attivo (
+   Public Shared Function GetCurrentParkIndSelected() As ParkInd
+      Dim ListParkInd As New List(Of ParkInd)
+      SelParkIndWD.LoadParkInd(ListParkInd)
+      ' Procedo a selezionare il primo (E ANCHE UNICO?..a volte no..) parcheggio attivo -> guarda funzione UpdateList <-
+      For Each ItemPark As ParkInd In ListParkInd
+         If ItemPark.IsStatusON Then
+            Return ItemPark
+         End If
+      Next
+      Return Nothing
+   End Function
+
+   ' Restitusice il nome del file immagine del parcheggio (manance solo dell'Indice di parcheggio e dell'esetensione png)
+   Public Shared Function GetPathCurrProj() As String
+      Dim nProj As Integer = m_MainWindow.m_CurrentProjectPageUC.GetCurrentProject()
+      Dim sParkPath As String = m_MainWindow.GetSaveDir() & "\" & Math.Abs(nProj).ToString("D4") & "_ParkInd_"
+      If Not String.IsNullOrEmpty(sActualProj) Then
+         Dim sDir As String = System.IO.Path.GetDirectoryName(sActualProj)
+         Dim sFile As String = System.IO.Path.GetFileNameWithoutExtension(sActualProj)
+         sParkPath = sDir & "\" & sFile & "_ParkInd_"
+      End If
+      Return sParkPath
+   End Function
+
+   Public Shared Sub CopyImgSvg(sNewFileName As String, Optional nCtx As Integer = -1)
+      If sNewFileName.EndsWith(".nge") Then
+         sNewFileName = sNewFileName.Remove(sNewFileName.Length - 4, 4) & "_ParkInd_"
+      End If
+      Dim Extension As String = ".svg"
+      If Not MainWindow.m_bShowSVGParkInd Then Extension = ".png"
+      Dim ListParkInd As New List(Of ParkInd)
+      ' ricarico la lista
+      SelParkIndWD.LoadParkInd(ListParkInd, nCtx)
+      'SelParkIndWD.sActualProj = Path.GetFileNameWithoutExtension(sPath)
+      For Each ItemParkInd As ParkInd In ListParkInd
+         If ItemParkInd.Ind <> 0 And ItemParkInd.Ind <> 999 And ItemParkInd.nPartInPark > 0 Then
+            Try
+               Dim sNewFile As String = sNewFileName & ItemParkInd.Ind.ToString & Extension
+               If MainWindow.m_bShowSVGParkInd Then
+                  WriteMyXML(sNewFile, ItemParkInd.LocalMyCanvas)
+               Else
+                  If System.IO.File.Exists(sNewFile) Then
+                     System.IO.File.Delete(sNewFile)
+                  End If
+                  System.IO.File.Copy(If(Extension = ".svg", ItemParkInd.Svg, ItemParkInd.Img), sNewFile)
+               End If
+            Catch ex As Exception
+               EgtOutLog("Copia immagine " & If(Extension = ".svg", ItemParkInd.Svg, ItemParkInd.Img) & " di ParkInd non roiscita")
+            End Try
+         End If
+      Next
+   End Sub
+
+#End Region    ' Metodi Shared
+
+End Class
+
+Public Class ParkInd
+   Implements INotifyPropertyChanged
+
+   Private m_VisbilityAllOff As Visibility = Visibility.Hidden
+
+   Private m_Ind As Integer
+   Public Property Ind As Integer
+      Get
+         Return m_Ind
+      End Get
+      Set(value As Integer)
+         m_Ind = value
+      End Set
+   End Property
+
+   Private m_Name As String
+   Public Property Name As String
+      Get
+         Return m_Name
+      End Get
+      Set(value As String)
+         m_Name = value
+      End Set
+   End Property
+
+   Private m_Img As String = String.Empty
+   Public Property Img As String
+      Get
+         Return m_Img
+      End Get
+      Set(value As String)
+         m_Img = value
+         NotifyPropertyChanged("MyVisibilityImg")
+      End Set
+   End Property
+
+   Private m_Svg As String = String.Empty
+   Public Property Svg As String
+      Get
+         Return m_Svg
+      End Get
+      Set(value As String)
+         m_Svg = value
+         NotifyPropertyChanged("MyVisibilitySvg")
+      End Set
+   End Property
+
+   Private m_nPartInTable As Integer = 0
+   Public Property nPartInTable As Integer
+      Get
+         Return m_nPartInTable
+      End Get
+      Set(value As Integer)
+         m_nPartInTable = value
+         NotifyPropertyChanged(NameOf(nPartInTable))
+      End Set
+   End Property
+
+   Private m_nPartInPark As Integer = GDB_ST.ON_
+   Public Property nPartInPark As Integer
+      Get
+         Return m_nPartInPark
+      End Get
+      Set(value As Integer)
+         m_nPartInPark = value
+         NotifyPropertyChanged(NameOf(nPartInPark))
+      End Set
+   End Property
+
+   Public ReadOnly Property CountInTab As String
+      Get
+         Return m_nPartInTable.ToString
+      End Get
+   End Property
+
+   Public ReadOnly Property ImgTab As String
+      Get
+         Return DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\table.png"
+      End Get
+   End Property
+
+   Public ReadOnly Property CountInPark As String
+      Get
+         Return m_nPartInPark.ToString
+      End Get
+   End Property
+
+   Public ReadOnly Property ImgPark As String
+      Get
+         Return DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park.png"
+      End Get
+   End Property
+
+   Private m_Status As Integer
+
+   Public Property Status As Integer
+      Get
+         Return m_Status
+      End Get
+      Set(value As Integer)
+         m_Status = value
+         NotifyPropertyChanged(NameOf(IsStatusON))
+      End Set
+   End Property
+
+   Public ReadOnly Property IsStatusON As Boolean
+      Get
+         Return (m_Status = GDB_ST.ON_)
+      End Get
+   End Property
+
+   Public ReadOnly Property MyVisibilityTmg As Visibility
+      Get
+         Return If(Not System.IO.File.Exists(m_Img), Visibility.Collapsed, Visibility.Visible)
+      End Get
+   End Property
+
+   Public ReadOnly Property MyVisibilitySvg As Visibility
+      Get
+         Return If(Not System.IO.File.Exists(m_Svg), Visibility.Collapsed, Visibility.Visible)
+      End Get
+   End Property
+
+   Public ReadOnly Property TitleVisibility As Visibility
+      Get
+         Return If(m_Ind = 999, m_VisbilityAllOff, Visibility.Visible)
+      End Get
+   End Property
+
+   Private m_LocalMyCanvas As MyCanvas
+   Public ReadOnly Property LocalMyCanvas As MyCanvas
+      Get
+         Return m_LocalMyCanvas
+      End Get
+   End Property
+
+   Sub New(Ind As Integer, Name As String, Stat As Integer)
+      m_Ind = Ind
+      m_Name = Name
+      m_Status = Stat
+      ' Costruisco il percorso immagine 
+      If m_Ind = 0 Then
+         ' Se Ind=0 allora applico il default: C:\EgtData\OmagCUT\Resources\MachineButtonsImage\NewIcons
+         m_Img = DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park_On.png"
+         m_Svg = DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park_On.svg"
+      ElseIf m_Ind = 999 Then
+         ' Se Ind=0 allora applico il default: C:\EgtData\OmagCUT\Resources\MachineButtonsImage\NewIcons
+         m_Img = DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park_Off.png"
+         m_Svg = DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park_Off.svg"
+      Else
+         m_Img = SelParkIndWD.GetPathCurrProj() & m_Ind.ToString & ".png"
+         m_Svg = SelParkIndWD.GetPathCurrProj() & m_Ind.ToString & ".svg"
+      End If
+
+      If MainWindow.m_bShowSVGParkInd Then
+         Dim CanvWidth As Integer = 145
+         Dim CanvHeight As Integer = CInt(CanvWidth / 1.4)
+         m_LocalMyCanvas = New MyCanvas(CanvWidth, CanvHeight)
+         If System.IO.File.Exists(m_Svg) Then
+            ReadMyXML(m_Svg, m_LocalMyCanvas)
+            m_Img = ""
+         End If
+      Else
+         m_Svg = ""
+      End If
+
+      ' Conto il numero di pezzi in Tavola
+      CountPartInTable()
+      ' Conto il numero di pezzi in parcheggio
+      CountPartInPark()
+
+   End Sub
+
+   ' Conta in numero di pezzi di questo parcheggio in Tavola
+   Private Sub CountPartInTable()
+      Dim nCount As Integer = 0
+      Dim nRawId As Integer = GetCurrentRaw()
+      ' Leggo l'indice di parcheggio dei pezzi in tavola
+      Dim nPartId As Integer = EgtGetFirstGroupInGroup(nRawId)
+      While nPartId <> GDB_ID.NULL
+         ' Aggiorno il valore del contatore
+         If IncreaseCounterPart(nPartId, nCount) Then
+            UpdateEntInCanvas(nPartId, 0.2)
+         End If
+         nPartId = EgtGetNextGroup(nPartId)
+      End While
+      m_nPartInTable = nCount
+   End Sub
+
+   ' Conta il numero di pezzi di questo parcheggio in Parcheggio
+   Private Sub CountPartInPark()
+      Dim nCount As Integer = 0
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         ' Aggiorno il valore del contatore 
+         If IncreaseCounterPart(nPartId, nCount) Then
+            UpdateEntInCanvas(nPartId, 1)
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      m_nPartInPark = nCount
+   End Sub
+
+   Private Sub UpdateEntInCanvas(nPartId, dOpacity)
+      If Not IsNothing(m_LocalMyCanvas) Then
+         ' modifico il colore del pezzo nel SVG
+         Dim nIdRegion As Integer = EgtGetFirstNameInGroup(nPartId, "Region")
+         If nIdRegion <> GDB_ID.NULL Then
+            Dim nIdEnt As Integer = EgtGetFirstInGroup(nIdRegion)
+            While nIdEnt <> GDB_ID.NULL
+               If EgtGetType(nIdEnt) = GDB_TY.SRF_FRGN Then
+                  Exit While
+               End If
+            End While
+            If nIdEnt <> GDB_ID.NULL Then
+               Dim sName As String = ""
+               EgtGetName(nIdEnt, sName)
+               Dim Idpath As MyPath = m_LocalMyCanvas.ListPath.Find(Function(x) x.id = sName)
+               If Not IsNothing(Idpath) Then
+                  Idpath.fill_opacity = dOpacity
+                  m_LocalMyCanvas.UpdateMyPath(Idpath)
+                  Idpath.LoadPath()
+                  NotifyPropertyChanged(NameOf(LocalMyCanvas))
+               End If
+            End If
+         End If
+      End If
+   End Sub
+
+   ' Verifica se il pezzo passato (da parcheggio o tavola) appartiene al ParkInd corrente e quindi aggiorna il valore di nCount+=1
+   Private Function IncreaseCounterPart(nPartId As Integer, ByRef nCount As Integer) As Boolean
+      Dim bOk As Boolean = False
+      ' Se i pezzi non hanno un indice di parcheggio
+      Dim sInfoParkInd As String = String.Empty
+      Dim nInfoParkInd As Integer = -1
+      ' Recupero l'indice del parcheggio
+      If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+         nInfoParkInd = If(IsNumeric(sInfoParkInd), CInt(sInfoParkInd), -1)
+      Else
+         nInfoParkInd = 0
+      End If
+      ' Se l'indice di parcheggio restituito è valido (Maggiore di -1)
+      If nInfoParkInd > -1 Then
+         ' e uguale a quallo del parcheggio correntemente selezionato
+         If nInfoParkInd = m_Ind Then
+            nCount = nCount + 1
+            bOk = True
+         End If
+      End If
+
+      Return bOk
+   End Function
+
+   Public Event PropertyChanged As PropertyChangedEventHandler Implements INotifyPropertyChanged.PropertyChanged
+
+   Public Sub NotifyPropertyChanged(propName As String)
+      RaiseEvent PropertyChanged(Me, New PropertyChangedEventArgs(propName))
+   End Sub
+
+End Class
+
+#Region "ELEMENTI PER LA GESTIONE SVG"
+
+Public Class MyCanvas
+
+   Private m_CurrCanvas As New Canvas
+   Public Property CurrCanvas As Canvas
+      Get
+         Return m_CurrCanvas
+      End Get
+      Set(value As Canvas)
+         m_CurrCanvas = value
+      End Set
+   End Property
+
+   Private m_ListPath As New List(Of MyPath)
+   Public Property ListPath As List(Of MyPath)
+      Get
+         Return m_ListPath
+      End Get
+      Set(value As List(Of MyPath))
+         m_ListPath = value
+      End Set
+   End Property
+
+   Private m_ViewBoxDim As String
+   Public Property ViewBoxDim As String
+      Get
+         Return m_ViewBoxDim
+      End Get
+      Set(value As String)
+         m_ViewBoxDim = value
+      End Set
+   End Property
+
+   Sub New(Width As Integer, Height As Integer)
+      m_CurrCanvas.Width = Width
+      m_CurrCanvas.Height = Height
+      m_CurrCanvas.ClipToBounds = True
+   End Sub
+
+   Public Sub LoadCanvas()
+      For Each ItemPath As MyPath In m_ListPath
+         m_CurrCanvas.Children.Add(ItemPath.CurrPath)
+      Next
+   End Sub
+
+   Public Sub UpdateMyPath(CurrPath As MyPath)
+      m_CurrCanvas.Children.Remove(CurrPath.CurrPath)
+      m_CurrCanvas.Children.Add(CurrPath.CurrPath)
+   End Sub
+
+End Class
+
+Public Class MyPath
+
+   Private m_CurrPath As New System.Windows.Shapes.Path
+   Public Property CurrPath As System.Windows.Shapes.Path
+      Get
+         Return m_CurrPath
+      End Get
+      Set(value As System.Windows.Shapes.Path)
+         m_CurrPath = value
+      End Set
+   End Property
+
+   Private m_CanvX As Double
+   Public ReadOnly Property CanvX As Double
+      Get
+         Return m_CanvX
+      End Get
+   End Property
+
+   Private m_CanvY As Double
+   Public ReadOnly Property CanvY As Double
+      Get
+         Return m_CanvY
+      End Get
+   End Property
+
+   Private m_DimX As Double
+   Public ReadOnly Property DimX As Double
+      Get
+         Return m_DimX
+      End Get
+   End Property
+
+   Private m_DimY As Double
+   Public ReadOnly Property DimY As Double
+      Get
+         Return m_DimY
+      End Get
+   End Property
+
+   Private m_id As String
+   Public ReadOnly Property id As String
+      Get
+         Return m_id
+      End Get
+   End Property
+
+   Private m_d As String
+   Public ReadOnly Property d As String
+      Get
+         Return m_d
+      End Get
+   End Property
+
+   Private m_fill As String
+   Public Property fill As String
+      Get
+         Return m_fill
+      End Get
+      Set(value As String)
+         m_fill = value
+      End Set
+   End Property
+
+   Private m_fill_opacity As Double
+   Public Property fill_opacity As Double
+      Get
+         Return m_fill_opacity
+      End Get
+      Set(value As Double)
+         m_fill_opacity = value
+      End Set
+   End Property
+
+   Private m_stroke As String
+   Public Property stroke As String
+      Get
+         Return m_stroke
+      End Get
+      Set(value As String)
+         m_stroke = value
+      End Set
+   End Property
+
+   Private m_stroke_opacity As Double
+   Public Property stroke_opacity As Double
+      Get
+         Return m_stroke_opacity
+      End Get
+      Set(value As Double)
+         m_stroke_opacity = value
+      End Set
+   End Property
+
+   Private m_stroke_width As Double
+   Public Property stroke_width As Double
+      Get
+         Return m_stroke_width
+      End Get
+      Set(value As Double)
+         m_stroke_width = value
+      End Set
+   End Property
+
+   Sub New(Id As String, D As String, CanvX As Double, CanvY As Double, DimX As Double, DimY As Double, Fill As String, FillOpacity As Double, Stroke As String, StrokeOpacity As Double)
+      m_id = Id
+      m_d = D
+      m_CanvX = CanvX
+      m_CanvY = CanvY
+      m_DimX = DimX
+      m_DimY = DimY
+      m_fill = Fill
+      m_fill_opacity = FillOpacity
+      m_stroke = Stroke
+      m_stroke_opacity = StrokeOpacity
+      LoadPath()
+   End Sub
+
+   Public Sub LoadPath()
+      ' Carico la geometria
+      m_CurrPath.Data = Geometry.Parse(d)
+      ' Carico il colore di sfondo
+      SetBrushFromRGBString(m_fill, m_CurrPath.Fill)
+      ' Applico l'opacità della superificie
+      m_CurrPath.Opacity = m_fill_opacity
+      ' Calcolo e applico la traslazione e la scalatura
+      Dim myTransformGroup As New TransformGroup()
+      Dim ScaleX As Double = m_CanvX / DimX
+      Dim ScaleY As Double = m_CanvY / DimY
+      Dim OffX As Double = (m_CanvX - Math.Min(ScaleX, ScaleY) * DimX) / 2
+      Dim OffY As Double = (m_CanvY - Math.Min(ScaleX, ScaleY) * DimY) / 2
+      myTransformGroup.Children.Add(New ScaleTransform(Math.Min(ScaleX, ScaleY), Math.Min(ScaleX, ScaleY)))
+      myTransformGroup.Children.Add(New TranslateTransform(OffX, OffY))
+      m_CurrPath.RenderTransform = myTransformGroup
+   End Sub
+
+   Private Sub SetBrushFromRGBString(sFill As String, ByRef brFill As Brush)
+      If String.IsNullOrEmpty(sFill) Then
+         brFill = Brushes.DarkRed
+         Return
+      End If
+      Dim s1 As String = sFill
+      If s1.Contains("rgb") Then
+         s1 = s1.Replace("rgb(", "")
+         s1 = s1.Replace(")", "")
+         Dim s2 As String = ""
+         For Each s As String In s1.Split(",")
+            s2 &= CInt(s).ToString("x2")
+         Next
+         brFill = New BrushConverter().ConvertFrom("#" & s2)
+      End If
+   End Sub
+
+End Class
+
+Public Module XMLReader
+
+   Public Sub ReadMyXML(FilePath As String, Canv As MyCanvas)
+      'Create the XML Reader
+      Dim m_xmlr As XmlTextReader = New XmlTextReader(FilePath)
+      'Disable whitespace so that you don't have to read over whitespaces
+      m_xmlr.WhitespaceHandling = WhitespaceHandling.None
+      ' Leggo la prima riga: '?xml' tag
+      m_xmlr.Read()
+      ' Passo a leggere la successiva: 'svg' tag
+      m_xmlr.Read()
+      ' Leggo gli attributi di questo tag (dimensioni)
+      Dim ViewBoxDim = m_xmlr.GetAttribute("viewBox")
+      Canv.ViewBoxDim = ViewBoxDim
+      ' Elaboro i dati per avere la scalatura del disegno
+      Dim DimViewBox As String() = ViewBoxDim.ToString.Split(" ")
+      Dim DimX As Integer = Math.Abs(CInt(DimViewBox(2))) + Math.Abs(CInt(DimViewBox(0)))
+      Dim DimY As Integer = Math.Abs(CInt(DimViewBox(3))) + Math.Abs(CInt(DimViewBox(1)))
+
+      ' Leggo in loop i tag: 'path'
+      While Not m_xmlr.EOF
+         m_xmlr.Read()
+         If Not m_xmlr.IsStartElement() Then
+            Continue While
+         End If
+         ' recupero il valore dell'attributo 'id'
+         Dim idAttribute = m_xmlr.GetAttribute("id")
+         ' recupero il valore dell'attributo 'd'
+         Dim dAttribute = m_xmlr.GetAttribute("d")
+         ' recupero il valore dell'attributo 'fill'
+         Dim fillAttribute = m_xmlr.GetAttribute("fill")
+         ' recupero il valore dell'attributo 'fill-opacity'
+         Dim fillOpacityAttribute = m_xmlr.GetAttribute("fill-opacity")
+         ' recupero il valore dell'attributo 'stroke'
+         Dim strokeAttribute = m_xmlr.GetAttribute("stroke")
+         ' recupero il valore dell'attributo 'stroke-opacity'
+         Dim strokeOpacityAttribute = m_xmlr.GetAttribute("stroke-opacity")
+         ' recupero il valore dell'attributo 'stroke - Width'
+         Dim strokeWidthAttribute = m_xmlr.GetAttribute("stroke-width")
+         ' carico l'elemento in lista solo se esiste un'immagine
+         If Not String.IsNullOrEmpty(idAttribute) And Not String.IsNullOrEmpty(dAttribute) Then
+            Dim fillOpacity As Double = 1 ' CDbl(fillOpacityAttribute)
+            StringToDouble(fillOpacityAttribute, fillOpacity)
+            Dim strokeOpacity As Double = 1 ' CDbl(strokeOpacityAttribute)
+            StringToDouble(strokeOpacityAttribute, strokeOpacity)
+            Canv.ListPath.Add(New MyPath(idAttribute, dAttribute, Canv.CurrCanvas.Width, Canv.CurrCanvas.Height, DimX, DimY, fillAttribute, fillOpacity, strokeAttribute, strokeOpacity))
+         End If
+
+      End While
+      ' Libero il file dalla lettura
+      m_xmlr.Close()
+      ' popolo la canvas con le Ptah che ho caricato
+      Canv.LoadCanvas()
+   End Sub
+
+   Public Sub WriteMyXML(FilePath As String, Canv As MyCanvas)
+
+      Dim _namespaceDefault As String = "http://www.w3.org/2000/svg"
+
+      Dim doc As New Xml.XmlDocument
+
+      Dim elm As System.Xml.XmlNode
+      Dim elmSub As System.Xml.XmlNode
+      Dim elmMain As Xml.XmlNode
+
+      doc = New Xml.XmlDocument
+
+      elmMain = doc.CreateElement("svg")
+      elmSub = elmMain.Attributes.Append(doc.CreateAttribute("viewBox"))
+      elmSub.Value = Canv.ViewBoxDim
+      elmSub = elmMain.Attributes.Append(doc.CreateAttribute("xmlns"))
+      elmSub.Value = _namespaceDefault
+
+      For Each itemPath As MyPath In Canv.ListPath
+         elm = elmMain.AppendChild(doc.CreateElement("path"))
+
+         elmSub = elm.Attributes.Append(doc.CreateAttribute("id"))
+         elmSub.Value = itemPath.id
+
+         elmSub = elm.Attributes.Append(doc.CreateAttribute("d"))
+         elmSub.Value = itemPath.d
+
+         If Not String.IsNullOrEmpty(itemPath.fill) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("fill"))
+            elmSub.Value = itemPath.fill
+         End If
+
+         If Not String.IsNullOrEmpty(itemPath.fill_opacity) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("fill-opacity"))
+            elmSub.Value = itemPath.fill_opacity.ToString(CultureInfo.InvariantCulture)
+         End If
+
+         If Not String.IsNullOrEmpty(itemPath.stroke) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("stroke"))
+            elmSub.Value = itemPath.stroke
+         End If
+
+         If Not String.IsNullOrEmpty(itemPath.stroke_opacity) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("stroke-opacity"))
+            elmSub.Value = itemPath.stroke_opacity.ToString(CultureInfo.InvariantCulture)
+         End If
+
+         If Not String.IsNullOrEmpty(itemPath.stroke_width) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("stroke-width"))
+            elmSub.Value = itemPath.stroke_width.ToString(CultureInfo.InvariantCulture)
+         End If
+
+      Next
+
+      doc.AppendChild(doc.CreateXmlDeclaration("1.0", "UTF-8", ""))
+      doc.AppendChild(elmMain)
+      doc.Save(FilePath)
+
+   End Sub
+
+End Module
+
+#End Region    ' Elementi per la gestione SVG

CadCuts/SplitAuto.vb

@@ -36,6 +36,8 @@ Public Module SplitAuto
       Public m_dStartFreeLen As Double
       Public m_dEndFreeLen As Double
       Public m_vtDir As Vector3d
+      ' ver 2.6f4: tagli corti gestiti con LeadIn.OUT/LeadOut.OUT
+      Public m_bMngLeadInOnIntCorner As Boolean
    End Class
 
    '-----------------------------------------------------------------------------------------------
@@ -47,125 +49,316 @@ Public Module SplitAuto
       While nOperId <> GDB_ID.NULL
          ' verifico sia una lavorazione valida della fase corrente
          If IsValidMachining(nOperId) And EgtGetOperationPhase(nOperId) = nCurrPhase Then
-            ' se appartiene ad un grezzo attivo la inserisco in lista
-            If IsMachiningInActiveRaw(nOperId) Then
-               Dim Mach As New SplitMach
-               Mach.m_nEntId = GDB_ID.NULL
-               ' identificativo
-               Mach.m_nId = nOperId
-               ' eventuali lavorazioni inglobate
-               Dim sInfo As String = String.Empty
-               If EgtGetInfo(nOperId, INFO_MCH_OTHMID, sInfo) Then
-                  Dim sItems() As String = sInfo.Split(",".ToCharArray)
-                  For Each sId As String In sItems
-                     Dim nId As Integer = 0
-                     StringToInt(sId, nId)
-                     If nId > 0 Then Mach.m_vOthId.Add(nId)
-                  Next
-               End If
-               ' tipo
-               Mach.m_nType = EgtGetOperationType(nOperId)
-               ' layer di origine
-               EgtGetInfo(nOperId, INFO_MCH_LAYER, Mach.m_sLay)
-               ' se taglio con lama
-               If Mach.m_nType = MCH_OY.SAWING Then
-                  ' verifica interferenza
-                  If Mach.m_sLay = NAME_OUTLOOP Then
-                     EgtVerifyMachining(nOperId, Mach.m_nInterf)
-                     For Each nId As Integer In Mach.m_vOthId
-                        Dim nRes As Integer = FMI_TYPE.LI Or FMI_TYPE.RM Or FMI_TYPE.LO
-                        EgtVerifyMachining(nId, nRes)
-                        Mach.m_nInterf = Mach.m_nInterf Or nRes
-                     Next
-                  Else
-                     Mach.m_nInterf = FMI_TYPE.NONE
-                  End If
-                  ' la imposto come lavorazione corrente
-                  EgtSetCurrMachining(nOperId)
-                  ' inversione
-                  EgtGetMachiningParam(MCH_MP.INVERT, Mach.m_bInvert)
-                  ' recupero l'angolo di fianco
-                  EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
-                  ' recupero allungamento iniziale e finale (negativi vicino ad angoli interni)
-                  Dim dStartAddLen As Double = -10
-                  EgtGetMachiningParam(MCH_MP.STARTADDLEN, dStartAddLen)
-                  Dim dEndAddLen As Double = -10
-                  EgtGetMachiningParam(MCH_MP.ENDADDLEN, dEndAddLen)
-                  ' recupero tipo entità, angolo con entità precedente e successiva, lunghezze libere iniziale e finale
-                  Mach.m_bIsLine = True
-                  Mach.m_dPrevAng = 0
-                  Mach.m_dNextAng = 0
-                  Mach.m_dStartFreeLen = FREELEN_INF + 1
-                  Mach.m_dEndFreeLen = FREELEN_INF + 1
-                  Dim nEntId, nSub As Integer
-                  If EgtGetMachiningGeometry(0, nEntId, nSub) Then
-                     ' EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse
-                     If EgtGetType(nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
-                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
-                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
-                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
-                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
-                     Mach.m_bEnableInvert = GetEnableInvert(nEntId)
-                     EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
-                     If Mach.m_bInvert Then Mach.m_vtDir = -Mach.m_vtDir
-                     Mach.m_nEntId = nEntId
-                  End If
-                  ' verifico se trasformabile in un taglio di separazione (almeno da un lato)
-                  If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL) And
-                     Mach.m_sLay = NAME_OUTLOOP And Mach.m_nInterf = FMI_TYPE.NONE Then
-                     Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
-                     Mach.m_bCanStartAll = (dStartAddLen > -EPS_SMALL And (nRes And CAR_RES.LI_OK) <> 0) And
-                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine
-                     Mach.m_bCanEndAll = (dEndAddLen > -EPS_SMALL And (nRes And CAR_RES.LO_OK) <> 0) And
-                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine
-                  End If
-                  ' se trasformabile in taglio di separazione, verifico se lo è
-                  If Mach.m_bCanStartAll Or Mach.m_bCanEndAll Then
-                     EgtSetCurrMachining(nOperId)
-                     Dim nLiType As Integer
-                     EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiType)
-                     Dim nLoType As Integer
-                     EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoType)
-                     Mach.m_bStartAll = (nLiType = MCH_SAW_LI.EXT_CENT Or nLiType = MCH_SAW_LI.EXT_OUT)
-                     Mach.m_bEndAll = (nLoType = MCH_SAW_LO.EXT_CENT Or nLoType = MCH_SAW_LO.EXT_OUT)
-                  Else
-                     Mach.m_bStartAll = False
-                     Mach.m_bEndAll = False
-                  End If
-               ' Waterjet
-               ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then
-                  Mach.m_nInterf = FMI_TYPE.NONE
-                  ' recupero l'angolo di fianco
-                  EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
-                  Mach.m_bCanStartAll = False
-                  Mach.m_bCanEndAll = False
-                  Mach.m_bStartAll = False
-                  Mach.m_bEndAll = False
-               ' Forature e fresature
-               Else
-                  Mach.m_nInterf = FMI_TYPE.NONE
-                  Mach.m_dSideAng = 0
-                  Mach.m_bCanStartAll = False
-                  Mach.m_bCanEndAll = False
-                  Mach.m_bStartAll = False
-                  Mach.m_bEndAll = False
-               End If
-               ' abilitazione
-               Mach.m_bEnabled = Not EgtExistsInfo(nOperId, INFO_MCH_USER_OFF)
-               ' pausa
-               Mach.m_bPause = GetPause(nOperId)
-               ' inserisco in lista
-               MachSplitList.Add(Mach)
-            ' altrimenti la disattivo
-            Else
-               EgtSetOperationMode(nOperId, False)
-            End If
+            Dim Mach As New SplitMach
+            If CreateMach(Mach, nOperId) Then MachSplitList.Add(Mach)
+            '' se appartiene ad un grezzo attivo la inserisco in lista
+            'If IsMachiningInActiveRaw(nOperId) Then
+            '   Dim Mach As New SplitMach
+            '   Mach.m_nEntId = GDB_ID.NULL
+            '   ' identificativo
+            '   Mach.m_nId = nOperId
+            '   ' eventuali lavorazioni inglobate
+            '   Dim sInfo As String = String.Empty
+            '   If EgtGetInfo(nOperId, INFO_MCH_OTHMID, sInfo) Then
+            '      Dim sItems() As String = sInfo.Split(",".ToCharArray)
+            '      For Each sId As String In sItems
+            '         Dim nId As Integer = 0
+            '         StringToInt(sId, nId)
+            '         If nId > 0 Then Mach.m_vOthId.Add(nId)
+            '      Next
+            '   End If
+            '   ' tipo
+            '   Mach.m_nType = EgtGetOperationType(nOperId)
+            '   ' layer di origine
+            '   EgtGetInfo(nOperId, INFO_MCH_LAYER, Mach.m_sLay)
+            '   ' se taglio con lama
+            '   If Mach.m_nType = MCH_OY.SAWING Then
+            '      ' verifica interferenza
+            '      If Mach.m_sLay = NAME_OUTLOOP Then
+            '         EgtVerifyMachining(nOperId, Mach.m_nInterf)
+            '         For Each nId As Integer In Mach.m_vOthId
+            '            Dim nRes As Integer = FMI_TYPE.LI Or FMI_TYPE.RM Or FMI_TYPE.LO
+            '            EgtVerifyMachining(nId, nRes)
+            '            Mach.m_nInterf = Mach.m_nInterf Or nRes
+            '         Next
+            '      Else
+            '         Mach.m_nInterf = FMI_TYPE.NONE
+            '      End If
+            '      ' la imposto come lavorazione corrente
+            '      EgtSetCurrMachining(nOperId)
+            '      ' inversione
+            '      EgtGetMachiningParam(MCH_MP.INVERT, Mach.m_bInvert)
+            '      ' recupero l'angolo di fianco
+            '      EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
+            '      ' recupero allungamento iniziale e finale (negativi vicino ad angoli interni)
+            '      Dim dStartAddLen As Double = -10
+            '      EgtGetMachiningParam(MCH_MP.STARTADDLEN, dStartAddLen)
+            '      Dim dEndAddLen As Double = -10
+            '      EgtGetMachiningParam(MCH_MP.ENDADDLEN, dEndAddLen)
+            '      ' recupero tipo entità, angolo con entità precedente e successiva, lunghezze libere iniziale e finale
+            '      Mach.m_bIsLine = True
+            '      Mach.m_dPrevAng = 0
+            '      Mach.m_dNextAng = 0
+            '      Mach.m_dStartFreeLen = FREELEN_INF + 1
+            '      Mach.m_dEndFreeLen = FREELEN_INF + 1
+            '      Dim nEntId, nSub As Integer
+            '      If EgtGetMachiningGeometry(0, nEntId, nSub) Then
+            '         ' EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse
+            '         If EgtGetType(nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
+            '         EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
+            '         EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
+            '         EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
+            '         EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
+            '         Mach.m_bEnableInvert = GetEnableInvert(nEntId)
+            '         EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
+            '         If Mach.m_bInvert Then Mach.m_vtDir = -Mach.m_vtDir
+            '         Mach.m_nEntId = nEntId
+            '         EgtGetInfo(nOperId, "ManageLeadInOnIntCorner", Mach.m_bMngLeadInOnIntCorner)
+            '      End If
+            '      ' verifico se trasformabile in un taglio di separazione (almeno da un lato)
+            '      If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+            '         Mach.m_sLay = NAME_OUTLOOP And ( Mach.m_nInterf And FMI_TYPE.RM) = 0 Then
+            '         Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
+            '         Dim bIn As Boolean = False
+            '         Dim bOut As Boolean = False
+            '         CanExtendSides(Mach, bIn, bOut)
+            '         Mach.m_bCanStartAll = ((dStartAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LI_OK) <> 0) And
+            '                               Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine And bIn
+            '         Mach.m_bCanEndAll = ((dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LO_OK) <> 0) And
+            '                             Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine And bOut
+            '         If nRes = 0 Then
+            '            EgtOutLog("Operation ID " & nOperId.ToString & " isn't split cut! verify depth machining.")
+            '         End If
+
+            '      ElseIf (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+            '         Mach.m_sLay = NAME_OUTLOOP And
+            '         (Mach.m_nInterf = FMI_TYPE.LI Or Mach.m_nInterf = FMI_TYPE.LO Or Mach.m_nInterf = FMI_TYPE.RM) Then
+            '         Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
+            '         Dim bIn As Boolean = False
+            '         Dim bOut As Boolean = False
+            '         CanExtendSides(Mach, bIn, bOut)
+            '         ' And (nRes And CAR_RES.LI_OK) <> 0 : da aggiungere
+            '         Mach.m_bCanStartAll = (dStartAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+            '                               Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine And bIn And
+            '                               Mach.m_nInterf <> FMI_TYPE.LI
+            '         ' And (nRes And CAR_RES.LO_OK) <> 0 : da aggiungere come sopra
+            '         Mach.m_bCanEndAll = (dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+            '                             Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine And bOut And
+            '                             Mach.m_nInterf <> FMI_TYPE.LO
+            '         If nRes = 0 Then
+            '            EgtOutLog("Operation ID " & nOperId.ToString & " isn't split cut! verify depth machining.")
+            '         End If
+            '      End If
+            '      ' se trasformabile in taglio di separazione, verifico se lo è
+            '      If Mach.m_bCanStartAll Or Mach.m_bCanEndAll Then
+            '         EgtSetCurrMachining(nOperId)
+            '         Dim nLiType As Integer
+            '         EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiType)
+            '         Dim nLoType As Integer
+            '         EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoType)
+            '         Mach.m_bStartAll = (nLiType = MCH_SAW_LI.EXT_CENT Or nLiType = MCH_SAW_LI.EXT_OUT)
+            '         Mach.m_bEndAll = (nLoType = MCH_SAW_LO.EXT_CENT Or nLoType = MCH_SAW_LO.EXT_OUT)
+            '      Else
+            '         Mach.m_bStartAll = False
+            '         Mach.m_bEndAll = False
+            '      End If
+            '      ' Waterjet
+            '   ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then
+            '      Mach.m_nInterf = FMI_TYPE.NONE
+            '      ' recupero l'angolo di fianco
+            '      EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
+            '      Mach.m_bCanStartAll = False
+            '      Mach.m_bCanEndAll = False
+            '      Mach.m_bStartAll = False
+            '      Mach.m_bEndAll = False
+            '      ' Forature e fresature
+            '   Else
+            '      Mach.m_nInterf = FMI_TYPE.NONE
+            '      Mach.m_dSideAng = 0
+            '      Mach.m_bCanStartAll = False
+            '      Mach.m_bCanEndAll = False
+            '      Mach.m_bStartAll = False
+            '      Mach.m_bEndAll = False
+            '   End If
+            '   ' abilitazione
+            '   Mach.m_bEnabled = Not EgtExistsInfo(nOperId, INFO_MCH_USER_OFF)
+            '   ' pausa
+            '   Mach.m_bPause = GetPause(nOperId)
+            '   ' inserisco in lista
+            '   MachSplitList.Add(Mach)
+            '   ' altrimenti la disattivo
+            'Else
+            '   EgtSetOperationMode(nOperId, False)
+            'End If
+
          End If
          nOperId = EgtGetNextOperation(nOperId)
       End While
       Return True
    End Function
 
+   Friend Function CreateMach(ByRef Mach As SplitMach, nOperId As Integer) As Boolean
+      Dim bOk As Boolean = True
+      ' se appartiene ad un grezzo attivo la inserisco in lista
+      If IsMachiningInActiveRaw(nOperId) Then
+         Mach.m_nEntId = GDB_ID.NULL
+         ' identificativo
+         Mach.m_nId = nOperId
+         ' eventuali lavorazioni inglobate
+         Dim sInfo As String = String.Empty
+         If EgtGetInfo(nOperId, INFO_MCH_OTHMID, sInfo) Then
+            Dim sItems() As String = sInfo.Split(",".ToCharArray)
+            For Each sId As String In sItems
+               Dim nId As Integer = 0
+               StringToInt(sId, nId)
+               If nId > 0 Then Mach.m_vOthId.Add(nId)
+            Next
+         End If
+         ' tipo
+         Mach.m_nType = EgtGetOperationType(nOperId)
+         ' layer di origine
+         EgtGetInfo(nOperId, INFO_MCH_LAYER, Mach.m_sLay)
+         ' se taglio con lama
+         If Mach.m_nType = MCH_OY.SAWING Then
+            ' verifica interferenza
+            If Mach.m_sLay = NAME_OUTLOOP Then
+               EgtVerifyMachining(nOperId, Mach.m_nInterf)
+               For Each nId As Integer In Mach.m_vOthId
+                  Dim nRes As Integer = FMI_TYPE.LI Or FMI_TYPE.RM Or FMI_TYPE.LO
+                  EgtVerifyMachining(nId, nRes)
+                  Mach.m_nInterf = Mach.m_nInterf Or nRes
+               Next
+            Else
+               Mach.m_nInterf = FMI_TYPE.NONE
+            End If
+            ' la imposto come lavorazione corrente
+            EgtSetCurrMachining(nOperId)
+            ' inversione
+            EgtGetMachiningParam(MCH_MP.INVERT, Mach.m_bInvert)
+            ' recupero l'angolo di fianco
+            EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
+            ' recupero allungamento iniziale e finale (negativi vicino ad angoli interni)
+            Dim dStartAddLen As Double = -10
+            EgtGetMachiningParam(MCH_MP.STARTADDLEN, dStartAddLen)
+            Dim dEndAddLen As Double = -10
+            EgtGetMachiningParam(MCH_MP.ENDADDLEN, dEndAddLen)
+            ' recupero tipo entità, angolo con entità precedente e successiva, lunghezze libere iniziale e finale
+            Mach.m_bIsLine = True
+            Mach.m_dPrevAng = 0
+            Mach.m_dNextAng = 0
+            Mach.m_dStartFreeLen = FREELEN_INF + 1
+            Mach.m_dEndFreeLen = FREELEN_INF + 1
+            Dim nEntId, nSub As Integer
+            If EgtGetMachiningGeometry(0, nEntId, nSub) Then
+               ' EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse
+               If EgtGetType(nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
+               EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
+               EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
+               EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
+               EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
+               Mach.m_bEnableInvert = GetEnableInvert(nEntId)
+               EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
+               If Mach.m_bInvert Then Mach.m_vtDir = -Mach.m_vtDir
+               Mach.m_nEntId = nEntId
+               EgtGetInfo(nOperId, "ManageLeadInOnIntCorner", Mach.m_bMngLeadInOnIntCorner)
+            End If
+            ' verifico se trasformabile in un taglio di separazione (almeno da un lato)
+            If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+                     Mach.m_sLay = NAME_OUTLOOP And (Mach.m_nInterf And FMI_TYPE.RM) = 0 Then
+               Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
+               Dim bIn As Boolean = False
+               Dim bOut As Boolean = False
+               CanExtendSides(Mach, bIn, bOut)
+               Mach.m_bCanStartAll = ((dStartAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LI_OK) <> 0) And
+                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine And bIn
+               Mach.m_bCanEndAll = ((dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LO_OK) <> 0) And
+                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine And bOut
+               If nRes = 0 Then
+                  EgtOutLog("Operation ID " & nOperId.ToString & " isn't split cut! verify depth machining.")
+               End If
+
+            ElseIf (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+                     Mach.m_sLay = NAME_OUTLOOP And
+                     (Mach.m_nInterf = FMI_TYPE.LI Or Mach.m_nInterf = FMI_TYPE.LO Or Mach.m_nInterf = FMI_TYPE.RM) Then
+               Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
+               Dim bIn As Boolean = False
+               Dim bOut As Boolean = False
+               CanExtendSides(Mach, bIn, bOut)
+               ' And (nRes And CAR_RES.LI_OK) <> 0 : da aggiungere
+               Mach.m_bCanStartAll = (dStartAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine And bIn And
+                                           Mach.m_nInterf <> FMI_TYPE.LI
+               ' And (nRes And CAR_RES.LO_OK) <> 0 : da aggiungere come sopra
+               Mach.m_bCanEndAll = (dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine And bOut And
+                                         Mach.m_nInterf <> FMI_TYPE.LO
+               If nRes = 0 Then
+                  EgtOutLog("Operation ID " & nOperId.ToString & " isn't split cut! verify depth machining.")
+               End If
+            End If
+            ' se trasformabile in taglio di separazione, verifico se lo è
+            If Mach.m_bCanStartAll Or Mach.m_bCanEndAll Then
+               EgtSetCurrMachining(nOperId)
+               Dim nLiType As Integer
+               EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiType)
+               Dim nLoType As Integer
+               EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoType)
+               Mach.m_bStartAll = (nLiType = MCH_SAW_LI.EXT_CENT Or nLiType = MCH_SAW_LI.EXT_OUT)
+               Mach.m_bEndAll = (nLoType = MCH_SAW_LO.EXT_CENT Or nLoType = MCH_SAW_LO.EXT_OUT)
+            Else
+               Mach.m_bStartAll = False
+               Mach.m_bEndAll = False
+            End If
+            ' Waterjet
+         ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then
+            Mach.m_nInterf = FMI_TYPE.NONE
+            ' recupero l'angolo di fianco
+            EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
+            Mach.m_bCanStartAll = False
+            Mach.m_bCanEndAll = False
+            Mach.m_bStartAll = False
+            Mach.m_bEndAll = False
+            ' Forature e fresature
+         Else
+            Mach.m_nInterf = FMI_TYPE.NONE
+            Mach.m_dSideAng = 0
+            Mach.m_bCanStartAll = False
+            Mach.m_bCanEndAll = False
+            Mach.m_bStartAll = False
+            Mach.m_bEndAll = False
+         End If
+         ' abilitazione
+         Mach.m_bEnabled = Not EgtExistsInfo(nOperId, INFO_MCH_USER_OFF)
+         ' pausa
+         Mach.m_bPause = GetPause(nOperId)
+      Else
+         ' altrimenti la disattivo
+         EgtSetOperationMode(nOperId, False)
+         bOk = False
+      End If
+      Return bOk
+   End Function
+
+   Private Function CanExtendSides(CurrMach As SplitMach, ByRef bIn As Boolean, ByRef bOut As Boolean) As Boolean
+      If CurrMach.m_dPrevAng < -EPS_ANG_SMALL And CurrMach.m_dNextAng > EPS_ANG_SMALL Then
+         ' Posso estendere SOLO l'uscita
+         bOut = True
+         bIn = False
+      ElseIf CurrMach.m_dPrevAng > EPS_ANG_SMALL And CurrMach.m_dNextAng < -EPS_ANG_SMALL Then
+         ' Posso estendere SOLO l'ingresso
+         bIn = True
+         bOut = False
+      ElseIf CurrMach.m_dPrevAng < -EPS_ANG_SMALL And CurrMach.m_dNextAng < -EPS_ANG_SMALL Then
+         ' NON Posso estendere
+         bIn = False
+         bOut = False
+      Else
+         bIn = True
+         bOut = True
+      End If
+      Return True
+   End Function
+
    '-----------------------------------------------------------------------------------------------
    ' calcolo il numero di tipi di lavorazioni
    Friend Sub CountMachiningType(MachSplit As SplitMach, ByRef nCountSawing As Integer, ByRef nCountWaterjetting As Integer, ByRef nCountOtherMachining As Integer)
@@ -194,7 +387,7 @@ Public Module SplitAuto
 
    Private Sub ColorSingleMachining(nOperId As Integer, sLay As String, dSideAng As Double, bEnabled As Boolean, nInterf As Integer)
       ' Verifico se è un taglio da sopra o da sotto
-      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or ( sLay = NAME_INLOOP AndAlso EgtExistsInfo( nOperId, INFO_FILOTOP)))
+      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or (sLay = NAME_INLOOP AndAlso EgtExistsInfo(nOperId, INFO_FILOTOP)))
       Dim bDrip As Boolean = (sLay = NAME_DRIPCUT Or sLay = NAME_UNDERDRILL)
       ' Recupero il preview della lavorazione
       Dim nPvId As Integer = GDB_ID.NULL
@@ -219,11 +412,11 @@ Public Module SplitAuto
             Next
             EgtSetColor(nDwnCutId, COL_MCH_DISABLED)
             Dim bFreeStart As Boolean = (nInterf And FMI_TYPE.LI) <> FMI_TYPE.LI
-            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
-            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
             Dim bFreeEnd As Boolean = (nInterf And FMI_TYPE.LO) <> FMI_TYPE.LO
-            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
-            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
          Else
             Dim colCut As Color3d
             If bOnMach Then
@@ -233,8 +426,19 @@ Public Module SplitAuto
             ElseIf Math.Abs(dSideAng) > EPS_ANG_SMALL Then
                colCut = COL_MCH_CUT_ANG()
             Else
-               colCut = COL_MCH_CUT()
+               ' Se macchina con cambio utensile di lama
+               If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+                  Dim sSawing As String = String.Empty, sSaw As String = String.Empty
+                  m_MainWindow.m_CadCutPageUC.m_SplitPage.GetCurrSawingandSaw(nOperId, sSawing, sSaw)
+                  ' Setto l'utensile corrente
+                  EgtTdbSetCurrTool(sSaw)
+                  ' recupero il colore della lavorazione direttamente dall'utensile
+                  colCut = Utility.GetColorPV()
+               Else
+                  colCut = COL_MCH_CUT()
+               End If
             End If
+
             For Each nId In vCutId
                EgtSetColor(nId, colCut)
             Next
@@ -342,6 +546,7 @@ Public Module SplitAuto
       Dim ptOri As Point3d
       EgtGetTableRef(1, ptOri)
       Dim vtOri As New Vector3d(ptOri.x, ptOri.y, ptOri.z)
+      ' ---------------------------------- GREZZI ----------------------------------
       ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
       Dim nRawId As Integer = EgtGetFirstRawPart()
       While nRawId <> GDB_ID.NULL
@@ -393,10 +598,19 @@ Public Module SplitAuto
          ' passo al successivo grezzo
          nRawId = EgtGetNextRawPart(nRawId)
       End While
+      ' ---------------------------------- GREZZI ----------------------------------
       ' Cancello preview dei tagli allungati dalla lavorazione
       For Each nCut As Integer In vCuts
          RemoveMachiningPreview(nCut)
       Next
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      ChangeOperationPhase(nNewPhase)
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      Return True
+   End Function
+
+   ' Sposta le lavorzioni della fase precedente a quella indicata
+   Friend Sub ChangeOperationPhase_ERR(nNewPhase As Integer)
       ' Sposto tutte le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
       Dim nId = EgtGetFirstOperation()
       While nId <> GDB_ID.NULL
@@ -417,9 +631,50 @@ Public Module SplitAuto
          End If
          nId = nNextId
       End While
-      Return True
-   End Function
+   End Sub
 
+   ' Miglioramento della gestione delle lavorazioni
+   Friend Sub ChangeOperationPhase(nNewPhase As Integer)
+      ' creo l'elenco delle lavorazioni che devono essere sposate
+      Dim MchList As New List(Of Integer)
+      ' Recupero le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
+      Dim nId = EgtGetFirstOperation()
+      While nId <> GDB_ID.NULL
+         Dim nNextId = EgtGetNextOperation(nId)
+         If IsValidMachining(nId) And EgtGetOperationPhase(nId) = nNewPhase - 1 And EgtExistsInfo(nId, INFO_MCH_USER_OFF) Then
+            ' Provo ad inserire la lavorazione nell'elenco
+            AddMach(MchList, nId)
+            ' sposto le inglobate
+            Dim sInfo As String = String.Empty
+            If EgtGetInfo(nId, INFO_MCH_OTHMID, sInfo) Then
+               Dim sItems() As String = sInfo.Split(",".ToCharArray)
+               For Each sId2 As String In sItems
+                  Dim nId2 As Integer = 0
+                  StringToInt(sId2, nId2)
+                  If nId2 > 0 Then
+                     ' Provo ad inserire la lavorazione nell'elenco
+                     AddMach(MchList, nId2)
+                  End If
+               Next
+            End If
+         End If
+         nId = nNextId
+      End While
+      ' Procedo ora a spostare le lavorazioni nella nuova disposizione
+      For Each ItemMchId As Integer In MchList
+         EgtChangeOperationPhase(ItemMchId, nNewPhase)
+      Next
+   End Sub
+
+   ' Inserisce gli inidici delle lavorazioni evitando di inserire dei doppioni
+   Private Sub AddMach(MchList As List(Of Integer), IdMch As Integer)
+      For Each Item As Integer In MchList
+         If IdMch = Item Then
+            Return
+         End If
+      Next
+      MchList.Add(IdMch)
+   End Sub
    '-----------------------------------------------------------------------------------------------
    Friend Function CalculateSplitAuto() As Boolean
       ' Fase iniziale
@@ -743,28 +998,36 @@ Public Module SplitAuto
 
    Private Function ExecMove(nDispId As Integer, vNewRaws As List(Of Integer),
                              vtMove As Vector3d, dMinMove As Double) As Boolean
-      Dim vtMove2 As Vector3d = -vtMove
+      Dim bTwoHeadVac As Boolean = (EgtGetHeadId(VACUUM_HEAD_2) <> GDB_ID.NULL)
       Dim rmData As New RawMoveData
-      If PutVacuumCupsOnRaw(vNewRaws(1), rmData) AndAlso
-                        SafeMoveRawPart(vNewRaws(1), vtMove, dMinMove) Then
+      Dim vtMove2 As Vector3d = -vtMove
+
+      VacuumCups.ResetHeadName()
+      Dim bPutVacuum As Boolean = PutVacuumCupsOnRaw(vNewRaws(1), rmData)
+      If Not bPutVacuum And bTwoHeadVac Then bPutVacuum = PutVacuumCupsOnRaw(vNewRaws(1), rmData)
+      If bPutVacuum AndAlso SafeMoveRawPart(vNewRaws(1), vtMove, dMinMove) Then
          rmData.m_vtRawMove = vtMove
          SaveOneMoveInfoInDisposition(nDispId, rmData)
          Return True
-      ElseIf PutVacuumCupsOnRaw(vNewRaws(0), rmData) AndAlso
-                        SafeMoveRawPart(vNewRaws(0), vtMove2, dMinMove) Then
+      End If
+
+      VacuumCups.ResetHeadName()
+      Dim bPut2Vacuum As Boolean = PutVacuumCupsOnRaw(vNewRaws(0), rmData)
+      If Not bPut2Vacuum And bTwoHeadVac Then bPutVacuum = PutVacuumCupsOnRaw(vNewRaws(0), rmData)
+      If bPut2Vacuum AndAlso SafeMoveRawPart(vNewRaws(0), vtMove2, dMinMove) Then
          rmData.m_vtRawMove = vtMove2
          SaveOneMoveInfoInDisposition(nDispId, rmData)
          Return True
-      Else
-         Return False
       End If
+
+      Return False
    End Function
 
    Private Function SafeMoveRawPart(nRawId As Integer, ByRef vtMove As Vector3d, dMindist As Double) As Boolean
       ' Spostamento originale
-      Dim vtOriMove As New Vector3d( vtMove)
+      Dim vtOriMove As New Vector3d(vtMove)
       ' Livello di movimento
-      Dim nMoveLevel As Integer = GetPrivateProfileInt( S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
+      Dim nMoveLevel As Integer = GetPrivateProfileInt(S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
       Dim nMove As Integer = 1
       ' Se esce dalla tavola, movimento già annullato ed esco con errore
       If Not EgtMoveRawPart(nRawId, vtOriMove) Then Return False
@@ -799,7 +1062,7 @@ Public Module SplitAuto
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
             vtMove += 0.5 * vtOriMove
             nMove += 1
-            If nMoveLevel = nMove Then return True
+            If nMoveLevel = nMove Then Return True
          Else
             EgtMoveRawPart(nRawId, -0.5 * vtOriMove)
          End If

CadCuts/SplitPageUC.xaml

@@ -1,10 +1,10 @@
 <UserControl x:Class="SplitPageUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="SplitPageUC_Initialized">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="SplitPageUC_Initialized">
 
    <!-- Definizione della SplitPage -->
    <Grid Name="SplitPageGrid" >
@@ -64,24 +64,49 @@
          </Grid.RowDefinitions>
 
          <ListBox Name="MachiningLsBx" Grid.Row="1"
-            SelectionMode="Extended">
+                  SelectionMode="Extended">
             <ListBox.ItemTemplate>
                <DataTemplate>
-                  <TextBlock Text="{Binding Name}">
-                     <TextBlock.Style>
-                        <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_CurrProjSummeryTextBlock}">
-                           <Style.Triggers>
-                              <DataTrigger Binding="{Binding bIsActive}" Value="False">
-                                 <Setter Property="TextDecorations" Value="Strikethrough"/>
-                                 <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
-                              </DataTrigger>
-                              <DataTrigger Binding="{Binding bIsActive}" Value="True">
-                                 <Setter Property="Foreground" Value="Black"/>
-                              </DataTrigger>
-                           </Style.Triggers>
-                        </Style>
-                     </TextBlock.Style>
-                  </TextBlock>
+                  <Grid Width="210">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2.8*"/>
+                        <ColumnDefinition Width="1.2*"/>
+                        <ColumnDefinition Width="Auto"/>
+                     </Grid.ColumnDefinitions>
+                     <TextBlock Text="{Binding Name}">
+                        <TextBlock.Style>
+                           <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_CurrProjSummeryTextBlock}">
+                              <Style.Triggers>
+                                 <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                                    <Setter Property="TextDecorations" Value="Strikethrough"/>
+                                    <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                                 </DataTrigger>
+                                 <DataTrigger Binding="{Binding bIsActive}" Value="True">
+                                    <Setter Property="Foreground" Value="Black"/>
+                                 </DataTrigger>
+                              </Style.Triggers>
+                           </Style>
+                        </TextBlock.Style>
+                     </TextBlock>
+                     <TextBlock Grid.Column="1" Text="{Binding TCPos}">
+                        <TextBlock.Style>
+                           <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_CurrProjSummeryTextBlock}">
+                              <Style.Triggers>
+                                 <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                                    <Setter Property="TextDecorations" Value="Strikethrough"/>
+                                    <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                                 </DataTrigger>
+                                 <DataTrigger Binding="{Binding bIsActive}" Value="True">
+                                    <Setter Property="Foreground" Value="Black"/>
+                                 </DataTrigger>
+                              </Style.Triggers>
+                           </Style>
+                        </TextBlock.Style>
+                     </TextBlock>
+                     <Rectangle Grid.Column="2"
+                                Visibility="{Binding MachiningTCPosVisibility}"
+                                Style="{DynamicResource Rect_SplitPage}"/>
+                  </Grid>
                </DataTemplate>
             </ListBox.ItemTemplate>
          </ListBox>
@@ -100,6 +125,12 @@
             <Button Name="MoveDownBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
                <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
+            <ToggleButton Name="LayNbArrTgBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowIconToggleButton}"
+                          Height="25" Width="25">
+               <Image Name="LayNbArrImg" 
+                      HorizontalAlignment="Center"
+                      VerticalAlignment="Center" Stretch="Uniform"/>
+            </ToggleButton>
 
          </Grid>
 
@@ -132,7 +163,7 @@
             <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
                <Image Source="{DynamicResource Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            
+
             <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
                <Image Source="{DynamicResource Inizio-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
@@ -146,17 +177,17 @@
                <Image Source="{DynamicResource PonticelliWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </ToggleButton>
 
-             <!--solo per macchine con lavorazioni Waterjet--> 
+            <!--solo per macchine con lavorazioni Waterjet-->
             <Button Name="QualityWJBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
                <Image Source="{DynamicResource QualityWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            
+
             <!-- solo per macchine con lavorazioni Waterjet -->
             <ToggleButton Name="BridgesDeleteWJBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
                <Image Source="{DynamicResource PonticelliDeleteWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </ToggleButton>
 
-           
+
 
          </Grid>
 

CadCuts/VacuumCups.vb

@@ -1,5 +1,6 @@
 Imports EgtUILib
 Imports System.Text.RegularExpressions
+Imports System.Threading
 
 Module VacuumCups
    ' Tipo manipolatore con ventosa (0=assente, 1=dietro, 2=laterale)
@@ -31,6 +32,19 @@ Module VacuumCups
    ' Nome del gruppo temporaneo per le ventose
    Private Const VACTMP_GRP As String = "VacTmp"
 
+   Private m_sHeadName As String = VACUUM_HEAD
+   Public Sub ResetHeadName()
+      Dim bReload As Boolean = (m_sHeadName <> VACUUM_HEAD)
+      m_sHeadName = VACUUM_HEAD
+      If bReload Then LoadVacuumCups()
+   End Sub
+   Public Function ChangeHeadName() As Boolean
+      If EgtGetHeadId( VACUUM_HEAD_2) = GDB_ID.NULL Then Return False
+      m_sHeadName = If( m_sHeadName = VACUUM_HEAD, VACUUM_HEAD_2, VACUUM_HEAD) 
+      LoadVacuumCups()
+      Return True
+   End Function
+
    '-----------------------------------------------------------------------------------------------
    Friend Class RawMoveData
 
@@ -87,17 +101,17 @@ Module VacuumCups
    Friend Function LoadVacuumCups() As Boolean
       ' Leggo tipo manipolatore con ventosa
       m_nVacType = 0
-      EgtGetInfo(EgtGetHeadId(VACUUM_HEAD), KEY_VAC_TYPE, m_nVacType)
+      EgtGetInfo(EgtGetHeadId(m_sHeadName), KEY_VAC_TYPE, m_nVacType)
       ' Cancello eventuali vecchie ventose
       RemoveVacuumCups()
       ' Identificativo ventose nella macchina
-      Dim nLayId As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), VACUUM_HEAD_LAYOUT)
+      Dim nLayId As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(m_sHeadName), VACUUM_HEAD_LAYOUT)
       If nLayId = GDB_ID.NULL Then Return False
       ' Identificativo riferimento della testa nella macchina
-      Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT)
+      Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(m_sHeadName), HEAD_FIRST_EXIT)
       If nT1Id = GDB_ID.NULL Then Return False
       ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
-      EgtSetCalcTool("", "H4", 1)
+      EgtSetCalcTool("", m_sHeadName, 1)
       ' Creo gruppo temporaneo in cui copiarli
       m_nTempId = EgtCreateGroup(GDB_ID.ROOT)
       If m_nTempId = GDB_ID.NULL Then Return False
@@ -107,23 +121,23 @@ Module VacuumCups
       m_nVacId = EgtCopyGlob(nLayId, m_nTempId)
       If m_nVacId = GDB_ID.NULL Then Return False
       ' Angolo di rotazione preferito
-      EgtGetInfo( m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
       ' Angoli di rotazione preferiti per ventosa in verticale (lungo Y) a sinistra e a destra del centro tavola
-      EgtGetInfo( m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
       EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
       EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYMINUS, m_dPrefVertRotYMinus)
       EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYPLUS, m_dPrefVertRotYPlus)
       ' Direzione di riferimento per tagli Drip
-      EgtGetInfo( m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
       ' Nascondo il gruppo ma rendo visibili le curve di contorno delle ventose
       EgtSetStatus(m_nVacId, GDB_ST.OFF)
       Dim nId As Integer = EgtGetFirstInGroup(m_nVacId)
       While nId <> GDB_ID.NULL
          Select Case EgtGetType(nId)
-         Case GDB_TY.CRV_LINE, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO
-            EgtSetStatus(nId, GDB_ST.ON_)
-         Case Else
-            EgtSetStatus(nId, GDB_ST.OFF)
+            Case GDB_TY.CRV_LINE, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO
+               EgtSetStatus(nId, GDB_ST.ON_)
+            Case Else
+               EgtSetStatus(nId, GDB_ST.OFF)
          End Select
          nId = EgtGetNext(nId)
       End While
@@ -152,7 +166,7 @@ Module VacuumCups
    Friend Function ResetVacuumCups() As Boolean
       ' Ripristino posizione e rotazione originali
       Dim frOriRef As New Frame3d
-      EgtFrame(EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT), GDB_ID.ROOT, frOriRef)
+      EgtFrame(EgtGetFirstNameInGroup(EgtGetHeadId(m_sHeadName), HEAD_FIRST_EXIT), GDB_ID.ROOT, frOriRef)
       Dim frCurrRef As New Frame3d
       EgtFrame(m_nRefId, GDB_ID.ROOT, frCurrRef)
       EgtMove(m_nVacId, frOriRef.Orig() - frCurrRef.Orig(), GDB_RT.GLOB)
@@ -164,10 +178,10 @@ Module VacuumCups
       Dim nId As Integer = EgtGetFirstInGroup(m_nVacId)
       While nId <> GDB_ID.NULL
          Select Case EgtGetType(nId)
-         Case GDB_TY.CRV_LINE, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO
-            EgtSetStatus(nId, GDB_ST.ON_)
-         Case Else
-            EgtSetStatus(nId, GDB_ST.OFF)
+            Case GDB_TY.CRV_LINE, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO
+               EgtSetStatus(nId, GDB_ST.ON_)
+            Case Else
+               EgtSetStatus(nId, GDB_ST.OFF)
          End Select
          nId = EgtGetNext(nId)
       End While
@@ -207,14 +221,17 @@ Module VacuumCups
       EgtSurfFrGrossArea(nRKerfId, RawArea)
       ' volume calcolato in mmc
       Dim RawVolume As Double = RawArea * b3Raw.DimZ()
-      ' peso calolato in kg
+      ' peso calcolato in kg
       m_RawWeight = RawVolume * m_RawDensity / Math.Pow(10, 9)
       '-------------------- FINE CALCOLO PESO --------------------
 
       ' Eseguo ricerca
       If FindVacuumCupsOnRaw(nRawId, ptRawCen, b3Kerf, ptKerfCen, nKerfId, nRKerfId, rmData) Then
          Return True
+      Else
+         If ChangeHeadName() Then Return False
       End If
+
       ' In caso di fallimento, provo riducendo con offset la regione di kerf
       ' (così si simula la proiezione del centro sul MAT - medial axis transform)
       Dim bOkFind As Boolean = False
@@ -241,20 +258,20 @@ Module VacuumCups
       ' Verifico sia veramente un pezzo
       If EgtGetRawPartFromPart(nPartId) = GDB_ID.NULL Then Return False
       ' Cerco la direzione del primo taglio attivo da sotto
-      Dim nDripLayId As Integer = EgtGetFirstNameInGroup( nPartId, NAME_DRIPCUT)
-      Dim nDripLineId As Integer = EgtGetFirstInGroup( nDripLayId)
+      Dim nDripLayId As Integer = EgtGetFirstNameInGroup(nPartId, NAME_DRIPCUT)
+      Dim nDripLineId As Integer = EgtGetFirstInGroup(nDripLayId)
       While nDripLineId <> GDB_ID.NULL
-         Dim nMchId As Integer = EgtGetOperationId( "DripSaw" & nDripLineId.ToString())
+         Dim nMchId As Integer = EgtGetOperationId("DripSaw" & nDripLineId.ToString())
          Dim nMode As Integer
-         If EgtGetMode( nMchId, nMode) AndAlso nMode = GDB_MD.STD Then Exit While
-         nDripLineId = EgtGetNext( nDripLineId)
+         If EgtGetMode(nMchId, nMode) AndAlso nMode = GDB_MD.STD Then Exit While
+         nDripLineId = EgtGetNext(nDripLineId)
       End While
       Dim vtDir As New Vector3d
-      if EgtStartVector( nDripLineId, GDB_ID.ROOT, vtDir) Then
+      If EgtStartVector(nDripLineId, GDB_ID.ROOT, vtDir) Then
          Dim dLen, dAngV, dAngH As Double
-         vtDir.ToSpherical( dLen, dAngV, dAngH)
+         vtDir.ToSpherical(dLen, dAngV, dAngH)
          Dim dOffsAng = dAngH - m_dDripRefAng
-         While dOffsAng - m_dPreferredRot >= 90 
+         While dOffsAng - m_dPreferredRot >= 90
             dOffsAng -= 180
          End While
          While dOffsAng - m_dPreferredRot <= -90
@@ -388,7 +405,7 @@ Module VacuumCups
 
    Private Function GetVacRotAxisSteps(ByRef vAngRot As List(Of Double)) As Boolean
       ' Recupero l'asse rotante della testa ventosa
-      Dim nRotAxId As Integer = EgtGetParent(EgtGetHeadId(VACUUM_HEAD))
+      Dim nRotAxId As Integer = EgtGetParent(EgtGetHeadId(m_sHeadName))
       ' Verifico se contiene info con STEPS
       Dim sSteps As String = ""
       If Not EgtGetInfo(nRotAxId, KEY_ROTVAC_STEPS, sSteps) Then Return False
@@ -493,15 +510,15 @@ Module VacuumCups
          ' Ordino secondo distanza angolare crescente da direzione di allineamento (modulo 180 deg)
          Dim dRotRefDeg As Double = dRotAngDeg
          vAngRot.Sort(Function(P, Q)
-                         Dim dDiffP = Math.Abs( P - dRotRefDeg)
-                         If Math.Abs( dDiffP - 180) < 10 * EPS_ANG_SMALL Then dDiffP = 1
-                         Dim dDiffQ = Math.Abs( Q - dRotRefDeg)
-                         If Math.Abs( dDiffQ - 180) < 10 * EPS_ANG_SMALL Then dDiffQ = 1
-                         Return ( dDiffP - dDiffQ)
+                         Dim dDiffP = Math.Abs(P - dRotRefDeg)
+                         If Math.Abs(dDiffP - 180) < 10 * EPS_ANG_SMALL Then dDiffP = 1
+                         Dim dDiffQ = Math.Abs(Q - dRotRefDeg)
+                         If Math.Abs(dDiffQ - 180) < 10 * EPS_ANG_SMALL Then dDiffQ = 1
+                         Return (dDiffP - dDiffQ)
                       End Function)
          ' Annullo la rotazione di allineamento
          dRotAngDeg = 0
-      ' altrimenti in continuo
+         ' altrimenti in continuo
       Else
          ' Assegno più valori di ricerca e conservo angolo di allineamento
          vAngRot.AddRange({0, +5, -5, +12.5, -12.5, +25, -25, +45, -45})
@@ -546,16 +563,45 @@ Module VacuumCups
       Return True
    End Function
 
-   ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   ' assegnate le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
    Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
+      Dim sAxisName As String = "C"
+      ' verifico che il nome dell'asse impostato sia corretto
+      If EgtGetAxisId(sAxisName) = GDB_ID.NULL Then
+         If m_sHeadName = VACUUM_HEAD Then
+            sAxisName = "C1"
+         Else
+            sAxisName = "C2"
+         End If
+      End If
+      ' Posizione Home dell'asse rotante
+      Dim dCHome As Double
+      EgtGetAxisHomePos(sAxisName, dCHome)
+      ' Corse dell'asse
+      Dim dCMin As Double
+      EgtGetAxisMin(sAxisName, dCMin)
+      Dim dCMax As Double
+      EgtGetAxisMax(sAxisName, dCMax)
+      ' Porto l'angolo nel range
+      Dim dRotAngMachDeg As Double = dRotAngDeg + dCHome
+      AdjustAngleInRange(dRotAngMachDeg, dCMin, dCMax)
+      ' Imposto la ventosa come fosse un utensile
+      EgtSetCalcTool("", m_sHeadName, 1)
+      ' Calcolo gli assi macchina
       Dim dX, dY, dZ As Double
       Dim nStat As Integer
-      Dim dCHome As Double
-      EgtGetAxisHomePos("C", dCHome)
-      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
-      EgtSetCalcTool("", "H4", 1)
-      EgtGetCalcPositions(ptRef, dRotAngDeg + dCHome, 0, nStat, dX, dY, dZ)
-      EgtVerifyOutstroke(dX, dY, dZ, dRotAngDeg + dCHome, 0, nStat)
+      If EgtGetAxisId("A") <> GDB_ID.NULL Then
+         ' Asse tavola rotante (movimenti solo con A0)
+         EgtGetCalcPositions(ptRef, 0, dRotAngMachDeg, nStat, dX, dY, dZ)
+         ' Verifico le corse
+         EgtVerifyOutstroke(dX, dY, dZ, 0, dRotAngMachDeg, nStat)
+      Else
+         EgtGetCalcPositions(ptRef, dRotAngMachDeg, 0, nStat, dX, dY, dZ)
+         ' Verifico le corse
+         EgtVerifyOutstroke(dX, dY, dZ, dRotAngMachDeg, 0, nStat)
+      End If
+
+
       Return nStat
    End Function
 
@@ -721,7 +767,7 @@ Module VacuumCups
             rmList.RemoveAt(nInd)
             nInd = rmList.Count() - 1
          End If
-      ' Se non trovato, lo accodo
+         ' Se non trovato, lo accodo
       Else
          rmList.Add(New RawMoveData(nRawId))
          nInd = rmList.Count() - 1

Constants/ConstGen.vb

@@ -84,6 +84,11 @@ Module ConstGen
 
    ' Nome testa con ventose per spostamento pezzi
    Public Const VACUUM_HEAD As String = "H4"
+   Public Const VACUUM_HEAD_2 As String = "H104"
+   ' Nome teste laser
+   Public Const LASER_HEAD As String = "H3"
+   Public Const LASER_HEAD_2 As String = "H103"
+
    ' Info tipo ventosa
    Public Const KEY_VAC_TYPE As String = "VacType"
    ' Nome gruppo layout in testa con ventose
@@ -152,6 +157,8 @@ Module ConstGen
    ' Info per identificazione gruppo pezzi
    Public Const INFO_REFGROUP As String = "RefGroup"
    Public Const INFO_COUNTERLY As String = "CounterPz"
+   Public Const INFO_PARKIND As String = "ParkInd"
+   Public Const INFO_PARKSTATUS As String = "ParkStatus"
 
    ' Contrassegno di progetto OmagCut
    Public Const NAME_PROJMARK As String = "OmagCut"
@@ -189,6 +196,8 @@ Module ConstGen
    Public Const INFO_TOPRODAREA As String = "ToProdArea"
    ' Info per nome progetti
    Public Const INFO_PROJNAME As String = "ProjName"
+   ' Info per parcheggio asse C
+   Public Const INFO_CAXESHOME As String = "CAxesHome"
 
    ' Nome layer delle regioni
    Public Const NAME_REGION As String = "Region"
@@ -216,6 +225,8 @@ Module ConstGen
    Public Const INFO_DEPTH2 As String = "Depth2"
    Public Const INFO_AGG2 As String = "Agg2"
    Public Const INFO_ROUNDOFF As String = "RoundOff"
+   Public Const INFO_DIRECTCUT As String = "DirectCut"
+   Public Const INFO_STEP_TYPE As String = "StepType"
    ' Info in entità da tagliare per taglio ristretto
    Public Const INFO_STRICT As String = "Strict"
    ' Info in entità da tagliare per angolo di lato e tallone
@@ -311,6 +322,10 @@ Module ConstGen
    Public Const INFO_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
    ' Info in OutLoop per punto inzio lavorazione WaterJet
    Public Const INFO_START As String = "Start"
+   ' Nome dei tagli diretti inseriti in fase di Splitting
+   Public Const SPLIT_CUT As String = "SplitCut"
+   ' Forzo specifica lavorazione
+   Public Const DEF_MACHINING As String = "Def_Machining"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"

Constants/ConstIni.vb

@@ -19,6 +19,7 @@ Module ConstIni
    Public Const K_DEBUG As String = "Debug"
    Public Const K_LICENCE As String = "Licence"
    Public Const K_NETKEY As String = "NetKey"
+   Public Const K_LOCKID As String = "LockId"
    Public Const K_MESSAGESDIR As String = "MessagesDir"
    Public Const K_MESSAGES As String = "Messages"
    Public Const K_SUPPORT As String = "Support"
@@ -52,7 +53,10 @@ Module ConstIni
    Public Const K_GENERATECN As String = "GenerateCN"
    Public Const K_FRACTIONPATTERN As String = "FractionPattern"
    Public Const K_PRECISION As String = "Precision"
-
+   Public Const K_QUITDRAWPAGE As String = "QuitDrawPage"
+   Public Const K_SHOWNBARROW As String = "ShowNbArrow"
+   Public Const K_SHOWEXPIREASSITANCE As String = "ShowExpireAssistance"
+   Public Const K_ENABLEDXFPARK As String = "EnableDXFPark"
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"
@@ -86,6 +90,7 @@ Module ConstIni
    Public Const K_TEXMAXLINPIX As String = "TextureMaxLinPixels"
    Public Const K_ZOOMWIN As String = "ZoomWin"
    Public Const K_DISTLINE As String = "DistLine"
+   Public Const K_ORTOGRAPHIC As String = "OrtoGraphic"
 
    Public Const S_ALZFRONT As String = "Alz&Front"
    Public Const K_ALZFRONT As String = "Alz&Front"
@@ -116,6 +121,8 @@ Module ConstIni
    Public Const K_LASTCOLOR As String = "LastColor"
    Public Const K_COLOR As String = "Color"
 
+   Public Const S_FRAMECOMPO As String = "FrameCompo"
+
    Public Const S_EXTCOMPO As String = "Compo"
 
    Public Const S_INTCOMPO As String = "InternalCompo"
@@ -204,6 +211,8 @@ Module ConstIni
    Public Const K_OFFSZ As String = "OffsZ"
    Public Const K_OFFSXY As String = "OffsXY"
    Public Const K_OFFSYY As String = "OffsYY"
+   Public Const K_OFFSXINTERY As String = "OffsYInterY"
+   Public Const K_OFFSXINTERYSAWTH As String = "OffsYInterYSawTh"
    Public Const K_STARTTRIM As String = "StartTrim"
    Public Const K_ENDTRIM As String = "EndTrim"
    Public Const K_OTHERSIDE As String = "OtherSide"
@@ -223,9 +232,18 @@ Module ConstIni
    Public Const K_RAWOFFSX As String = "OffsX"
    Public Const K_RAWOFFSY As String = "OffsY"
    Public Const K_RAWKERF As String = "Kerf"
+   Public Const K_ENABLEOTHERREFTAB As String = "EnableOtherRefTab"
+   Public Const K_OTHERREFTAB As String = "OtherRefTab"
+   Public Const K_OTHERREFTABX As String = "OtherRefTabX"
+   Public Const K_OTHERREFTABY As String = "OtherRefTabY"
+   Public Const K_OTHERREFTABPOS As String = "OtherRefTabPos"
+   Public Const K_REFTAB As String = "RefTab"
+   Public Const K_CURRENTREFTAB As String = "CurrRefTab"
+
 
    Public Const S_RAWMOVE As String = "RawMove"
    Public Const K_RAWSTEP As String = "Step"
+   Public Const K_EXTRASTEP As String = "ExtraStep"
    Public Const K_RAWROTATION As String = "Rotation"
    Public Const K_PERPENDICULAR As String = "Perpendicular"
 
@@ -277,6 +295,8 @@ Module ConstIni
    Public Const S_VEINMATCHING As String = "VeinMatching"
    Public Const K_VEINMA_ENABLE As String = "Enable"
    Public Const K_VEINMA_PLACE As String = "WinPlace"
+   Public Const K_VEINMA_WIDTH As String = "Width"
+   Public Const K_VEINMA_HEIGHT As String = "Height"
 
    Public Const S_FASTGRID As String = "FastGrid"
    Public Const K_FG_ENABLE As String = "FGEnable"
@@ -323,6 +343,7 @@ Module ConstIni
    Public Const K_DC_FLATT_HEADSIDE As String = "FlattHeadSide"
    Public Const K_DC_FLATT_MACHTYPE As String = "FlattMachType"
    Public Const K_DC_FLATT_ROTLOCK As String = "FlattRotLock"
+   Public Const K_DC_FLAT_CHAINEDPATH As String = "ChainedPath"
    Public Const K_DC_FLATT_POSX As String = "FlattPosX"
    Public Const K_DC_FLATT_POSY As String = "FlattPosY"
    Public Const K_DC_POLISH_NAME As String = "PolishName"
@@ -332,6 +353,7 @@ Module ConstIni
    Public Const K_DC_TEST_OFFSET As String = "TestOffset"
    Public Const K_DC_OFFSET_SQUARING As String = "OffsetSquaring"
    Public Const K_DC_EXTRA_LEN_SQUARING As String = "ExtraLenSquaring"
+   Public Const K_ENABLEINVERT As String = "EnableInvert"
 
    Public Const S_STATDATA As String = "StatData"
    Public Const K_SD_DAY As String = "Day"

Constants/ConstMachIni.vb

@@ -5,6 +5,7 @@
 
    Public Const S_PARTPROGRAM As String = "PartProgram"
    Public Const K_EXTENSION As String = "Extension"
+   Public Const K_EXTFILECN As String = "ExtFileCN"
 
    Public Const S_AXES As String = "Axes"
    Public Const K_AXESNUM As String = "AxesNum"
@@ -31,6 +32,7 @@
    Public Const K_A10ID As String = "A10Id"
    Public Const K_DELTA_C As String = "DeltaC"
    Public Const K_ININCHES As String = "InInches"
+   Public Const K_CPOS As String = "CPos"
 
    Public Const S_NCSIEMENS As String = "NcSiemens"
    Public Const K_COMM_NAME As String = "CommName"
@@ -46,9 +48,20 @@
    Public Const K_THREADSLEEP As String = "ThreadSleep"
    Public Const K_PHOTODELEY As String = "PhotoDeley"
 
+   Public Const S_NCFANUC As String = "NcFanuc"
+   Public Const K_SETNCMODE As String = "SetNcMode"
+   Public Const K_BASEADDRINT As String = "BaseAddrInt"
+   Public Const K_BASEADDRBIT As String = "BaseAddrBit"
+   Public Const K_NUMVARINT As String = "NumVarInt"
+   Public Const K_NUMVARBIT As String = "NumVarBit"
+
    Public Const S_EXECLUA As String = "ExecLua"
    Public Const K_FILESCRIPT_LUA As String = "FileScript"
 
+   Public Const S_CAMERAHQ As String = "CameraHQ"
+   Public Const K_CAMERAHQ_ENABLE As String = "EnableHQ"
+   Public Const K_CAMERAHQ_ACTIVATE As String = "ActivateHQ"
+
    Public Const S_NCDATA As String = "NcData"
    Public Const K_NEWVARIABLE As String = "NewVariable"
    Public Const K_NEWCONSOLE As String = "NewConsole"
@@ -78,12 +91,16 @@
    Public Const K_TABLEDOWN As String = "TableDown"
    Public Const K_MANUAL As String = "Manual"
    Public Const K_DOORCLOSED As String = "DoorClosed"
+   Public Const K_DOOROPENDED As String = "DoorOpened"
    Public Const K_LIMITZ As String = "LimitZ"
    Public Const K_POWEROVR As String = "PowerOvr"
    Public Const K_PARKING As String = "Parking"
    Public Const K_ENABLEZONE As String = "EnableZone"
    Public Const K_ENABLEPC As String = "EnablePC"
    Public Const K_HSM As String = "Hsm"
+   Public Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Public Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
+   Public Const BTN_ENABLE_PC As String = "EnablePC"
    Public Const K_VACUUMUP As String = "VacuumUp"
    Public Const K_VACUUMDOWN As String = "VacuumDown"
    Public Const K_VACUUM2UP As String = "Vacuum2Up"
@@ -112,6 +129,8 @@
    Public Const K_FEEDHOLD As String = "FeedHold"
    Public Const K_SPOTLIGHT1 As String = "SpotLight1"
    Public Const K_SPOTLIGHT2 As String = "SpotLight2"
+   Public Const K_NAXES As String = "nAxes"
+   Public Const K_RESETSTATUS As String = "ResetStatus"
    ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
    Public Const K_XYJOG As String = "XYJog"
@@ -142,6 +161,10 @@
    Public Const K_PRODLIPROBINGTCPOS2VAR As String = "ProbingTcPos2Var"
    Public Const K_PRODLISAWDIAMETER2VAR As String = "SawDiameter2Var"
 
+   Public Const S_POLISHLINE As String = "PolishLine"
+   Public Const K_CLICKSTATE As String = "ClickState"
+   Public Const k_CLICKDIR As String = "ClickDir"
+
    Public Const S_STATISTICS As String = "Stats"
    Public Const K_DATADIR As String = "DataDir"
    Public Const K_SHOWAREAS As String = "ShowAreas"
@@ -158,6 +181,12 @@
    Public Const K_PHOTO_OFFSETY As String = "OffsetY"
    Public Const K_PHOTO_TAB2_OFFSETX As String = "Tab2OffsetX"
    Public Const K_PHOTO_TAB2_OFFSETY As String = "Tab2OffsetY"
+   Public Const K_PHOTO_HQ_OFFSETX As String = "HQOffsetX"
+   Public Const K_PHOTO_HQ_OFFSETY As String = "HQOffsetY"
+   Public Const K_CAMERA_DIRECT_CMD As String = "CameraDirectCmd"
+   Public Const K_CAMERA_STATE_VAR As String = "CameraStateVar"
+   Public Const K_ENABELE_GOHOME_FOR_PHOTO As String = "EnableGoHomeForPhoto"
+   Public Const K_PENDIG_TIME_FOR_PHOTO As String = "PendigTimeForPhoto"
 
    Public Const S_TOOLS As String = "Tools"
    Public Const K_DRILLBIT As String = "Drillbit"
@@ -207,6 +236,7 @@
    Public Const K_MACH_MILLING_ON_SINKS As String = "MillingOnSinks"
    Public Const K_MACH_MILLING_SHORTENING As String = "MillingShortening"
    Public Const K_MACH_ENGRAVING_WITHMILL As String = "EngravingWithMill"
+   Public Const K_MACH_STARTCENERTOOLPATH As String = "StartCenterToolPath"
    Public Const K_MACH_ENGRAVING_DEPTH As String = "EngravingDepth"
    Public Const K_MACH_ENGRAVING_WIDTH As String = "EngravingWidth"
    Public Const K_MACH_NEST_ALIGNED As String = "Aligned"
@@ -223,7 +253,8 @@
    Public Const K_HOLES_OFFSETWJ As String = "HolesOffsetWJ"
    Public Const K_MIN_RADIUSWJ As String = "MinRadiusWJ"
    Public Const K_MACH_DRILLINGWJ_ON_CORNERS As String = "DrillingWJOnCorners"
-   ' DrillMillC90
+   Public Const K_MACH_RECTIFICATION_ON_SUBSQUARE As String = "RectificationSubSqWJ"
+   Public Const K_MACH_DRILL_MILL_C90 As String = "DrillMillC90"
    ' CutLongDxSx
    ' AngRotMultiCut
    ' MinDistHeadsMultiCut
@@ -270,6 +301,7 @@
    Public Const S_MACH_PROBING As String = "Probing"
    Public Const K_PROBINGSTATEVAR As String = "ProbingStateVar"
    Public Const K_SAWDIAMETER As String = "SawDiameter"
+   Public Const K_TOOLLENGTH As String = "ToolLength"
    Public Const K_RAWTHICKNESS As String = "RawThickness"
    Public Const K_ENABLERAWPROBE As String = "EnableRawProbe"
 
@@ -281,6 +313,7 @@
 
    Public Const S_MACH_MACH As String = "Mach"
    Public Const K_CURRSAW As String = "CurrSaw"
+   Public Const K_CURRSAWTILTED As String = "CurrSawTilted"
    Public Const K_CURRDRILL As String = "CurrDrill"
    Public Const K_CURRMILL As String = "CurrMill"
    Public Const K_CURRMILLNOTIP As String = "CurrMillNoTip"
@@ -288,6 +321,8 @@
    Public Const K_CURRDRIPDRILL As String = "CurrDripDrill"
    Public Const K_CURRWATERJET As String = "CurrWaterJet"
    Public Const K_CURRSAWING As String = "CurrSawing"
+   Public Const K_CURRSAWINGTILTED As String = "CurrSawingTilted"
+   Public Const K_APPLYSAWINGTILTED As String = "ApplySawingTilted"
    Public Const K_CURRDRILLING As String = "CurrDrilling"
    Public Const K_CURRMILLING As String = "CurrMilling"
    Public Const K_CURRPOCKETING As String = "CurrPocketing"

DirectCuts/ControlsDirectCutUC.xaml.vb

@@ -53,7 +53,6 @@ Public Class ControlsDirectCutUC
       FlatteningCut
       Polishing
       CopyTemplate
-      SawTest
       SingleCutAuto
       SingleDrill
       Squaring
@@ -140,8 +139,11 @@ Public Class ControlsDirectCutUC
          Return
       End If
 
-      ' Caso standard
-      m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      If m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.MachineButtonUC Or
+         m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.VacuumButtonUC Then
+         ' Caso standard
+         m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      End If
 
       ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
       Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
@@ -180,6 +182,9 @@ Public Class ControlsDirectCutUC
       If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
          bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
       End If
+      If Not bSaw Then
+         EgtOutLog(" WARNING! Impossible to get point from SAW, there isn't SAW or SAWING! It's available only by DRAW")
+      End If
       m_SingleCut.SetEnableParam(bSaw)
       m_MultipleCut.SetEnableParam(bSaw)
       m_GridCut.SetEnableParam(bSaw)

DirectCuts/ControlsDirectCutUC1.xaml.vb

@@ -99,6 +99,9 @@ Public Class ControlsDirectCutUC1
       If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
          bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
       End If
+      If Not bSaw Then
+         EgtOutLog(" WARNING! Impossible to get point from SAW, there isn't SAW or SAWING! It's available only by DRAW")
+      End If
       'm_SingleCut.SetEnableParam(bSaw)
       'm_MultipleCut.SetEnableParam(bSaw)
       'm_GridCut.SetEnableParam(bSaw)

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -23,6 +23,9 @@ Public Class ControlsMachineButtonUC
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
 
+   ' visualizzo l'elenco degli elementi della pagina sono al primo avvio
+   Friend Shared m_OutLogTypeButton As Boolean = True
+
    ' Creazione converter da String a ImageSource
    Dim ImageConverter As New ImageSourceConverter
 
@@ -72,10 +75,37 @@ Public Class ControlsMachineButtonUC
                If Not IsNothing(ButtonToAdd) Then m_ButtonList.Add(ButtonToAdd)
             End If
          End While
+
+         For Each MachineButton As MachineButton In m_ButtonList
+            GetTypeButton(MachineButton)
+         Next
+         m_OutLogTypeButton = False
+
          NotifyPropertyChanged("ButtonList")
       End If
    End Sub
 
+#Region "STATE CHANGED"
+   ' ------------------------------------------------------------------------------
+   ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
+   '-------------------------------------------------------------------------------
+
+   Friend Sub GetTypeButton(CurrMachineButton As MachineButton)
+      If Not m_OutLogTypeButton Then Return
+      Dim BtnType As Type = CurrMachineButton.GetType
+      If BtnType Is GetType(NoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(0) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(TwoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(1) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(ThreeStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(2) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(DoubleCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(3) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(PressedCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(4) ") & " , " & CurrMachineButton.StateFlag)
+      End If
+   End Sub
+
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim SpindleButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
@@ -255,38 +285,34 @@ Public Class ControlsMachineButtonUC
       Dim DoorOpenedButton As ThreeStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_DOORCLOSED Then
-            'If TypeOf MachineButton Is NoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, NoStateButton)
-            'ElseIf TypeOf MachineButton Is TwoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, TwoStateButton)
-            'ElseIf TypeOf MachineButton Is ThreeStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, ThreeStateButton)
-            'ElseIf TypeOf MachineButton Is DoubleCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, DoubleCommandButton)
-            'ElseIf TypeOf MachineButton Is PressedCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, PressedCommandButton)
-            'End If
             DoorClosedButton = MachineButton
          End If
-         If MachineButton.StateFlag = "DoorOpened" Then
+         If MachineButton.StateFlag = K_DOOROPENDED Then
             DoorOpenedButton = MachineButton
          End If
       Next
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorClosedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_Red")
             Case 1, 2
+               ' porta in movimento/aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
          End Select
       End If
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorOpenedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
             Case 1
+               ' porta in movimento 
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Yellow")
             Case 2
+               ' porta chiusa
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Green")
          End Select
       End If
@@ -343,35 +369,64 @@ Public Class ControlsMachineButtonUC
    End Sub
 
    Friend Sub ZoneStateChanged(ZoneState As Integer)
-      'Dim sFlag As String = String.Empty
-      'If ZoneState = 1 Then
-      '   sFlag = BTN_ENABLE_ZONE_1
-      'ElseIf ZoneState = 2 Then
-      '   sFlag = BTN_ENABLE_ZONE_2
-      'End If
-      'Dim EnableZoneButton As TwoStateButton = Nothing
-      'For Each MachineButton As MachineButton In m_ButtonList
-      '   If MachineButton.StateFlag = K_ENABLEZONE Then
-      '      EnableZoneButton = MachineButton
-      '   End If
-      'Next
-      'If Not IsNothing(EnableZoneButton) Then
-      '   EnableZoneButton.SetIsChecked(EnableZone)
-      'End If
+      Dim bEnableZone1 As Boolean = False
+      If ZoneState = 1 Then
+         bEnableZone1 = True
+      ElseIf ZoneState = 2 Then
+         bEnableZone1 = False
+      End If
+      ' attivo il comando associato
+      Dim EnableZoneButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = BTN_ENABLE_ZONE_1 Then
+            EnableZoneButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnableZoneButton) Then
+         EnableZoneButton.SetIsChecked(bEnableZone1)
+      End If
+      ' disattivo l'altro per esclusione
+      EnableZoneButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = BTN_ENABLE_ZONE_2 Then
+            EnableZoneButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnableZoneButton) Then
+         EnableZoneButton.SetIsChecked(Not bEnableZone1)
+      End If
    End Sub
 
-   Friend Sub PcStateChanged(EnablePC As Boolean)
-      'Dim EnablePCButton As TwoStateButton = Nothing
-      'For Each MachineButton As MachineButton In m_ButtonList
-      '   If MachineButton.StateFlag = K_ENABLEPC Then
-      '      EnablePCButton = MachineButton
-      '   End If
-      'Next
-      'If Not IsNothing(EnablePCButton) Then
-      '   EnablePCButton.SetIsChecked(EnablePC)
-      'End If
+   Friend Sub PcStateChanged(EnablePC As Integer)
+      Dim bEnablePC1 As Boolean = False
+      If EnablePC = 1 Then
+         bEnablePC1 = True
+      ElseIf EnablePC = 2 Then
+         bEnablePC1 = False
+      End If
+      ' attivo/disattivo il comando associato
+      Dim EnablePCButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = K_ENABLEPC & "_1" Then
+            EnablePCButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnablePCButton) Then
+         EnablePCButton.SetIsChecked(bEnablePC1)
+      End If
+      ' disattivo/attivo l'altro per esclusione
+      EnablePCButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = BTN_ENABLE_ZONE_2 Then
+            EnablePCButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnablePCButton) Then
+         EnablePCButton.SetIsChecked(Not bEnablePC1)
+      End If
    End Sub
 
+#End Region    ' State Range
 
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
@@ -569,13 +624,64 @@ Public MustInherit Class MachineButton
                   EgtOutLog("dopo scrittura seconda variabile")
                End If
                Return
+            Case 4
+               ' ------------------------------------ FANUC ------------------------------------
+               ' eventuale scrittura di linea di comando MDI
+               If Not String.IsNullOrEmpty(CmdString) Then
+                  ' attivo mpdalità MDI
+                  m_CN.DGeneralFunctions_WriteCncMode(2)
+                  System.Threading.Thread.Sleep(100)
+                  ' salvo la stringa di comando ricevuta dal file lua
+                  m_CN.sz_ManualDataInput = CmdString
+                  ' esguo la funzione che ha il compito di scrivere il comando MDI
+                  m_CN.MDI_command()
+               End If
+               ' attivo modalità AUTO
+               m_CN.DGeneralFunctions_WriteCncMode(7)
+               System.Threading.Thread.Sleep(100)
+               If String.IsNullOrEmpty(EValue) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue As Boolean
+                     If EValue.Trim = "1" Then bEValue = True
+                     m_CN.NC_write_var_bit(ENumber, CBool(EValue))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber, CShort(EValue))
+                  End If
+                  EgtOutLog("Fanuc_DNumber= " & ENumber & " DValue= " & EValue)
+               End If
+               ' eventale caricamento seconda variabile
+               If String.IsNullOrEmpty(EValue2) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber2)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber2)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber2.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue2 As Boolean
+                     If EValue2.Trim = "1" Then bEValue2 = True
+                     m_CN.NC_write_var_bit(ENumber2, CBool(EValue2))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber2, CShort(EValue2))
+                  End If
+                  EgtOutLog("Fanuc_DNumber2= " & ENumber2 & " DValue2= " & EValue2)
+               End If
+               Return
          End Select
       End If
       '--------------------------------------------------------- MDI ---------------------------------------------------------
       Dim nResult As Short
       ' assegno la modalità di funzionamento
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
-         Case 1, 2
+         Case 1, 2, 4
             nResult = m_CN.DGeneralFunctions_WriteCncMode(2)     ' Modalità MDI per controlli num
          Case 3
             'Per il siemens non devo fare nulla
@@ -599,7 +705,7 @@ Public MustInherit Class MachineButton
          m_CN.DGeneralFunctions_CycleStart()
       End If
       System.Threading.Thread.Sleep(300)
-      ' riprostino la modalità manuale
+      ' ripristino la modalità manuale..?? siucuri ??
       nResult = m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
    End Sub
 
@@ -620,6 +726,7 @@ Public MustInherit Class MachineButton
          EgtTdbGetCurrToolParam(MCH_TP.FEED, dFeed)
       End If
       EgtLuaSetGlobNumVar("CMD.F", dFeed)
+
       Dim dSpeed As Double = 0
       If Not String.IsNullOrWhiteSpace(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text) Then
          StringToDouble(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text, dSpeed)
@@ -628,6 +735,18 @@ Public MustInherit Class MachineButton
          EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)
@@ -636,8 +755,17 @@ Public MustInherit Class MachineButton
       EgtLuaSetGlobNumVar("CMD.R1", dR1)
       EgtLuaSetGlobNumVar("CMD.R2", dR2)
       EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
+
+      ' versione 2.6h1
+      Dim sCurrTable As String = String.Empty
+      Dim nCuttTable As Integer = 1
+      EgtGetTableName(sCurrTable)
+      If sCurrTable <> "MainTab" Then nCuttTable = 2
+      EgtLuaSetGlobIntVar("CMD.TABLE", nCuttTable)
+
       EgtLuaCallFunction("CmdString")
-      ' Leggo variabili
+
+      ' Leggo variabili da file Lua
       CmdString = String.Empty
       EgtLuaGetGlobStringVar("CMD.CMDSTRING", CmdString)
       b2Start = False
@@ -694,11 +822,26 @@ Public Class TwoStateButton
       Set(value As Boolean)
          ' accendo il comando, anche se dovrei aspettare di leggere lo stato da PLC
          m_IsChecked = value
+         Dim sLuaScriptFile As String = m_MainWindow.m_CurrentMachine.sMachDir & "\DirectCmd\"
          If value Then
+            sLuaScriptFile &= TLuaScriptName
             ExecuteMDICommand(TLuaScriptName)
          Else
+            sLuaScriptFile &= FLuaScriptName
             ExecuteMDICommand(FLuaScriptName)
          End If
+
+         Dim IsPressedShiftKey As Boolean = False
+         If Keyboard.Modifiers And ModifierKeys.Shift And
+            GetPrivateProfileInt(S_GENERAL, K_DEBUG, 0, m_MainWindow.GetIniFile()) > 4 Then IsPressedShiftKey = True
+         ' procedo all'apertura del file CadCut1 appena generato (solo se generazione corretta)
+         If IsPressedShiftKey Then
+            Try
+               Process.Start("Notepad.exe", sLuaScriptFile)
+            Catch ex As Exception
+               EgtOutLog(ex.ToString)
+            End Try
+         End If
       End Set
    End Property
    Friend Sub SetIsChecked(value As Boolean)
@@ -789,6 +932,7 @@ Public Class NoStateButton
             ExecuteMDICommand(TLuaScriptName)
          End If
       Else
+         ' FANUC, SIEMENS
          ExecuteMDICommand(TLuaScriptName)
       End If
    End Sub

DirectCuts/CopyTemplateUC.xaml.vb

@@ -166,6 +166,15 @@ Public Class CopyTemplateUC
    Private Sub Point1Btn_Click(sender As Object, e As RoutedEventArgs) Handles Point1Btn.Click
       ' Verifico configurazione tavola e grezzo
       If Not m_bTabOk Then Return
+
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      If bIsMultiCut Then
+         EgtSetCalcTool(sSaw, "H1", 1)
+      End If
+
       ' Se acquisizione lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
@@ -173,14 +182,19 @@ Public Class CopyTemplateUC
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then
             Return
          End If
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
          ' Altrimenti da lama
@@ -188,7 +202,7 @@ Public Class CopyTemplateUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
@@ -196,8 +210,6 @@ Public Class CopyTemplateUC
       Else
          ' Verifico presenza punto da mouse
          If Not m_bMouseOk Then Return
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Imposto la lama corrente
          If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
          ' Assegno punto selezionato nel disegno a m_ptTipP1

DirectCuts/DirectCutPageUC.xaml

@@ -219,7 +219,10 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
             <!--<ColumnDefinition Width="1*"/>-->
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
@@ -263,9 +266,11 @@
               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
             <Image Source="{DynamicResource ParkingImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
+          
+          
 
          <!--Comando Manula/MDI-->
-         <Button Name="ManualModeBtn" Grid.Column="8"
+         <Button Name="ManualModeBtn" Grid.Column="11"
                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
             <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </Button>

DirectCuts/DirectCutPageUC.xaml.vb

@@ -53,7 +53,7 @@ Public Class DirectCutPageUC
 
       'Posizionemento nella griglia delle Page UserControl
       m_MachineButtons.SetValue(Grid.RowProperty, 2)
-      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 7)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, m_MachineButtons.nCountButton)
       m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
 
       m_ControlsDirectCutUC.SetValue(Grid.RowProperty, 1)
@@ -64,12 +64,18 @@ Public Class DirectCutPageUC
       ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [ControlMachButtons])
       Dim bCollapsedNewBottonsConsole As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons("JogButtons", "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
+      ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [VacuumMachButtons])
+      Dim bCollapsedVacuumButton As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_VACUUMMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       If Not m_NewMachineButtonsType Then
          'Assegno MachineButtons alla pagina
          LowerButtonGrid.Children.Add(m_MachineButtons)
          ControlsMachineBtn.Visibility = Windows.Visibility.Collapsed
          VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
       End If
+      ' se non sono configurate le ventose allora nascondo il comando
+      If m_NewMachineButtonsType AndAlso bCollapsedVacuumButton Then
+         VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
+      End If
 
       ' nuovi bottoni 20/05/2021 - modifica specifiche 04/08/2021
       ' leggo il numero di assi attivi nella macchina
@@ -140,6 +146,9 @@ Public Class DirectCutPageUC
       If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
          bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
       End If
+      If Not bSaw Then
+         EgtOutLog(" WARNING! Impossible to get point from SAW, there isn't SAW or SAWING! It's available only by DRAW")
+      End If
       m_ControlsDirectCutUC.m_SingleCut.SetEnableParam(bSaw)
       m_ControlsDirectCutUC.m_MultipleCut.SetEnableParam(bSaw)
       m_ControlsDirectCutUC.m_GridCut.SetEnableParam(bSaw)
@@ -209,6 +218,7 @@ Public Class DirectCutPageUC
          m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
          m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
          MachineButtonGrid.Children.Add(m_ControlsMachineButton)
+         m_ActiveControl = Controls.MachineButtonUC
          If VacuumMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
             VacuumMachineBtn.IsChecked = False
@@ -221,6 +231,7 @@ Public Class DirectCutPageUC
    Private Sub VacuumMachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles VacuumMachineBtn.Click
       If VacuumMachineBtn.IsChecked Then
          MachineButtonGrid.Children.Add(m_VacuumMachineButton)
+         m_ActiveControl = Controls.VacuumButtonUC
          If ControlsMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
             ControlsMachineBtn.IsChecked = False
@@ -417,12 +428,14 @@ Public Class DirectCutPageUC
       If m_bShowMachine Then
          ' aggiorno lo stato
          Select Case m_nMachLook
-         Case MCH_LOOK.ALL
-            m_nMachLook = MCH_LOOK.TAB_HEAD
-         Case MCH_LOOK.TAB_HEAD
-            m_nMachLook = MCH_LOOK.TAB_TOOL
-         Case Else
-            m_nMachLook = MCH_LOOK.ALL
+            Case MCH_LOOK.ALL
+               m_nMachLook = MCH_LOOK.TAB_HEAD
+            Case MCH_LOOK.TAB_HEAD
+               m_nMachLook = MCH_LOOK.TAB_TOOL
+            Case MCH_LOOK.TAB_TOOL
+               m_nMachLook = MCH_LOOK.TAB
+            Case Else
+               m_nMachLook = MCH_LOOK.ALL
          End Select
          ' aggiorno lo stato della macchina e la sua visualizzazione
          EgtSetMachineLook(m_nMachLook)
@@ -444,8 +457,12 @@ Public Class DirectCutPageUC
             m_ControlsDirectCutUC1.DirectCutPage_Unloaded(Nothing, Nothing)
          Case Controls.MachineButtonUC
             MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC1)
             ControlsMachineBtn.IsChecked = False
          Case Controls.VacuumButtonUC
+            MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
             MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
             VacuumMachineBtn.IsChecked = False
       End Select
@@ -465,7 +482,7 @@ Public Class DirectCutPageUC
 
    Private Sub ManualModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualModeBtn.Click
       ' Imposto modalità manuale della macchina
-      Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
+      Dim nResult As Short = m_MainWindow.m_DirectCutPageUC.m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
 
    End Sub
 

DirectCuts/FlatteningCut.xaml

@@ -7,142 +7,185 @@
    mc:Ignorable="d" 
    d:DesignHeight="597.3" d:DesignWidth="256">
 
-   <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
-   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
+    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
+    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
 
-      <!-- Definizione della Grid FlatteningCut -->
-      <Grid Name="FlatteningCutGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="2*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/> 
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
+            <!-- Definizione della Grid FlatteningCut -->
+            <Grid Name="FlatteningCutGrid" >
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="2*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
 
-         <Grid Grid.Row="0" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+                <Grid Grid.Row="0" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
 
-                <ToggleButton Name="Point1Btn" Grid.Column="0"
+                    <ToggleButton Name="Point1Btn" Grid.Column="0"
                Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
+                        <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </ToggleButton>
 
-                <ToggleButton Name="Point2Btn" Grid.Column="1"
+                    <ToggleButton Name="Point2Btn" Grid.Column="1"
                Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
+                        <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </ToggleButton>
 
-            </Grid>
+                </Grid>
 
-         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
 
-         <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
+            <ScrollViewer VerticalScrollBarVisibility="Visible" Visibility="Visible"
+                          Grid.Row="1" Grid.RowSpan="11" Grid.ColumnSpan="2">
+
+                <Grid Name="DatiTaglioGrid" >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.1"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="0.1"/>
+                    </Grid.RowDefinitions>
+
+                    <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
+                <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
+                <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"
+                <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="WidthTxBl" Grid.Column="0" Grid.Row="5"
+                <TextBlock Name="WidthTxBl" Grid.Column="0" Grid.Row="5"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OverlapTxBl" Grid.Column="0" Grid.Row="6"
+                <TextBlock Name="OverlapTxBl" Grid.Column="0" Grid.Row="6"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OverlapTxBx" Grid.Column="1" Grid.Row="6" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="OverlapTxBx" Grid.Column="1" Grid.Row="6" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-            <TextBlock Name="ZReleasedTxBl" Grid.Column="0" Grid.Row="7"
+                <TextBlock Name="ZReleasedTxBl" Grid.Column="0" Grid.Row="7"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="ZReleasedTxBx" Grid.Column="1" Grid.Row="7" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>          
+                <EgtWPFLib:EgtTextBox Name="ZReleasedTxBx" Grid.Column="1" Grid.Row="7" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="SideTxBl" Grid.Row="8" Grid.ColumnSpan="2"
+                <TextBlock Name="SideTxBl" Grid.Row="8" Grid.ColumnSpan="2"
              Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="SideChBx" Grid.Row="8" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                <CheckBox Name="SideChBx" Grid.Row="8" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
              HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
-         <ComboBox Name="TypeCmBx" Grid.Row="9" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+                <ComboBox Name="TypeCmBx" Grid.Row="9" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
 
-         <TextBlock Name="RotLockTxBl" Grid.Row="10" Grid.ColumnSpan="2"
+                <TextBlock Name="RotLockTxBl" Grid.Row="10" Grid.ColumnSpan="2"
              Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="RotLockChBx" Grid.Row="10" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                <CheckBox Name="RotLockChBx" Grid.Row="10" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
              HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
-         <Grid Grid.Row="11" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-            <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-         </Grid>
+                    <TextBlock Name="ChainedPathTxBl" Grid.Row="11" Grid.ColumnSpan="2"
+             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    <CheckBox Name="ChainedPathChBx" Grid.Row="11" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
-         <Grid Grid.Row="12" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+                    <ComboBox Name="SelToolCmBx" Grid.Row="12" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                        <ComboBox.ItemTemplate>
+                            <DataTemplate>
+                                <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                            </DataTemplate>
+                        </ComboBox.ItemTemplate>
+                    </ComboBox>
+
+                    <Grid Grid.Row="13" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="0.5*"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="0.5*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                    <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                    <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                    <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                </Grid>
+
+                </Grid>    
+            </ScrollViewer>
+
+            <Grid Grid.Row="12" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+
+                    <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                    <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                    <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                </Grid>
 
-                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
             </Grid>
-
-      </Grid>
-
-   </Border>
+        
+    </Border>
 
 </UserControl>

DirectCuts/FlatteningCut.xaml.vb

@@ -1,4 +1,6 @@
-Imports EgtUILib
+Imports System.Reflection
+Imports EgtUILib
+Imports EgtUILib.EgtInterface
 
 Public Class FlatteningCut
 
@@ -35,14 +37,18 @@ Public Class FlatteningCut
    Private m_bHeadSide As Boolean = False
    Private m_nMachType As Integer = 1
    Private m_bRotLock As Boolean = False
+   Private m_bChainedPath As Boolean = True
+   Private m_nTool As Integer = 0
    ' Array delle modalità di acquisizione dei punti
    Private m_PointsModeArray(2) As String
    ' Array delle tipologia di lavorazione della spianatura
-   Private m_TypeArray(1) As String
+   Private m_TypeArray(2) As String
    ' Punto selezionato nel disegno
    Private m_ptPrev As Point3d
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
+   ' Array degliutensili disponibili (lama e fresa)
+   Private m_ToolsArray(1) As String
 
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
@@ -57,8 +63,9 @@ Public Class FlatteningCut
    End Enum
    ' Costanti che indicano la tipologia di lavorazione della spianatura
    Private Enum MACH_TYPE As Integer
-      ONEWAY = 0
-      ZIGZAG = 1
+      ZIGZAG = 0
+      ONEWAY = 1
+      SPIRAL = 2
    End Enum
    'Costante che indica il lato in cui posizionare i tagli
    Private Enum CutSide As Integer
@@ -66,6 +73,11 @@ Public Class FlatteningCut
       Right
    End Enum
 
+   Private Enum TOOL As Integer
+      SAW = 0
+      MILL = 1
+   End Enum
+
    ' Per abilitare la spianatura con la FRESA deve essere imposatato a TRUE il flag "Usa Fresa" nella pagina MACCHINA (campo INCISIONI)
    Private Sub FlatteningCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
@@ -75,8 +87,9 @@ Public Class FlatteningCut
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' Creo lista tipo lavorazione
-      m_TypeArray(MACH_TYPE.ONEWAY) = EgtMsg(MSG_COMBOBOXPARAM + 39)
       m_TypeArray(MACH_TYPE.ZIGZAG) = EgtMsg(MSG_COMBOBOXPARAM + 38)
+      m_TypeArray(MACH_TYPE.ONEWAY) = EgtMsg(MSG_COMBOBOXPARAM + 39)
+      m_TypeArray(MACH_TYPE.SPIRAL) = EgtMsg(MSG_COMBOBOXPARAM + 51)
       ' la associo alla combobox
       TypeCmBx.ItemsSource = m_TypeArray
       ' assegno messaggi
@@ -90,19 +103,26 @@ Public Class FlatteningCut
       ZReleasedTxBl.Text = "Z Svincolo"
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
       RotLockTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 29)
+      ChainedPathTxBl.Text = "Chained path"
       SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
       OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      ' tipo di utensile in uso per la lavorazione
+      m_ToolsArray(TOOL.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
+      m_ToolsArray(TOOL.MILL) = "Mill"
+      SelToolCmBx.ItemsSource = m_ToolsArray
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_LENGTH, m_dLen, m_MainWindow.GetIniFile())
-      m_dWid = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_WIDTH, m_dWid, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dLen = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_LENGTH, m_dLen, m_MainWindow.GetIniFile())
+      m_dWid = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_WIDTH, m_dWid, m_MainWindow.GetIniFile())
       m_dOverlap = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_OVERLAP, m_dOverlap, m_MainWindow.GetIniFile())
       m_dZReleased = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, m_dZReleased, m_MainWindow.GetIniFile())
       m_bHeadSide = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_nMachType = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType, m_MainWindow.GetIniFile())
-      m_bRotLock = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_nMachType = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType, m_MainWindow.GetIniFile())
+      m_bRotLock = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_bChainedPath = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLAT_CHAINEDPATH, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_nTool = GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile())
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
       m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
    End Sub
 
@@ -125,16 +145,16 @@ Public Class FlatteningCut
       ' Disabilito registrazione progetto modificato
       EgtDisableModified()
       ' Creo layer temporaneo per crocette
-      m_nTempLay = EgtCreateGroup( GDB_ID.ROOT)
-      EgtSetLevel( m_nTempLay, GDB_LV.TEMP)
+      m_nTempLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
       ' Origine tavola
       m_bRawOk = True
-      If Not EgtGetTableRef( 1, m_ptTabOri) Then
+      If Not EgtGetTableRef(1, m_ptTabOri) Then
          m_bRawOk = False
          EgtOutLog("Error on TableRef1")
       End If
       ' Dati del grezzo
-      If Not GetRawBox( m_ptRawMin, m_ptRawMax) Then
+      If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then
          m_bRawOk = False
          EgtOutLog("Error on RawBox")
       End If
@@ -142,7 +162,7 @@ Public Class FlatteningCut
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -151,10 +171,10 @@ Public Class FlatteningCut
       SetCoordVisibility(True)
       ShowCoord()
       ' Assegno parametri di lavorazione già definiti
-      DepthTxBx.Text = LenToString( m_dDepth, 1)
-      DirectionTxBx.Text = DoubleToString( m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
-      LenghtTxBx.Text = LenToString( m_dLen, 1)
-      WidthTxBx.Text = LenToString( m_dWid, 2)
+      DepthTxBx.Text = LenToString(m_dDepth, 1)
+      DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+      LenghtTxBx.Text = LenToString(m_dLen, 1)
+      WidthTxBx.Text = LenToString(m_dWid, 2)
       OverlapTxBx.Text = LenToString(m_dOverlap, 2)
       ZReleasedTxBx.Text = LenToString(m_dZReleased, 2)
       ' carico la quota di svincolo per la spianatura
@@ -163,6 +183,9 @@ Public Class FlatteningCut
       SideChBx.IsChecked = m_bHeadSide
       TypeCmBx.SelectedIndex = m_nMachType
       RotLockChBx.IsChecked = m_bRotLock
+      ChainedPathChBx.IsChecked = m_bChainedPath
+      ' Assegno l'utensile in definito in macchina per la fresatura
+      SelToolCmBx.SelectedIndex = m_nTool
       ' Reset taglio e disabilito bottone esecuzione
       m_bCutOk = False
       UpdateSimulOkBtn()
@@ -176,19 +199,22 @@ Public Class FlatteningCut
 
    Friend Sub FlatteningCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_LENGTH, DoubleToString( m_dLen, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_WIDTH, DoubleToString( m_dWid, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_OVERLAP, DoubleToString(m_dOverlap, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, DoubleToString(m_dZReleased, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, If( m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If( m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString( m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_LENGTH, DoubleToString(m_dLen, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_WIDTH, DoubleToString(m_dWid, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_OVERLAP, DoubleToString(m_dOverlap, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, DoubleToString(m_dZReleased, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, If(m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If(m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
       ' Se non vado in simulazione
       If Not m_bSimul Then
+         ' imposto la Z di sicurezza corretta
+         EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
+         EgtMdbSave()
          ' Dichiaro sottopagina da non riattivare
          m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
@@ -265,30 +291,43 @@ Public Class FlatteningCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      If bIsMultiCut Then
+         EgtSetCalcTool(sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Altrimenti da lama
          Else
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -298,15 +337,13 @@ Public Class FlatteningCut
          m_dAngO = dTAngO + 90
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
 
-      ' Altrimenti da disegno
+         ' Altrimenti da disegno
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP1
          m_ptTipP1 = m_ptPrev
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Imposto la lama corrente
          If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
       End If
@@ -336,27 +373,40 @@ Public Class FlatteningCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      If bIsMultiCut Then
+         EgtSetCalcTool(sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Altrimenti da lama
          Else
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
          If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
@@ -364,15 +414,13 @@ Public Class FlatteningCut
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
 
-      ' Altrimenti da disegno
+         ' Altrimenti da disegno
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Imposto la lama corrente
          If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
       End If
@@ -406,7 +454,7 @@ Public Class FlatteningCut
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -521,6 +569,16 @@ Public Class FlatteningCut
       EgtDraw()
    End Sub
 
+   Private Sub SelToolCmBx_SelectionChanged(sender As Object, e As EventArgs) Handles SelToolCmBx.SelectionChanged
+      m_nTool = SelToolCmBx.SelectedIndex
+      ' Disabilito il concatenamento
+      ChainedPathChBx.IsEnabled = (m_nTool = TOOL.MILL)
+      ' Disegno il taglio
+      CreateFlatteningCut()
+      SetMachineInCurrPos()
+      EgtDraw()
+   End Sub
+
    Private Sub RotLockChBx_Click(sender As Object, e As EventArgs) Handles RotLockChBx.Click
       m_bRotLock = RotLockChBx.IsChecked
       ' Disegno il taglio
@@ -529,6 +587,14 @@ Public Class FlatteningCut
       EgtDraw()
    End Sub
 
+   Private Sub ChainedPathChBx_Click(sender As Object, e As EventArgs) Handles ChainedPathChBx.Click
+      m_bChainedPath = ChainedPathChBx.IsChecked
+      ' Disegno il taglio
+      CreateFlatteningCut()
+      SetMachineInCurrPos()
+      EgtDraw()
+   End Sub
+
    Private Sub XcoordTxBx_EgtClosed(sender As Object, e As EventArgs) Handles XcoordTxBx.EgtClosed
       ' Recupero il valore della coordinata (in 0 Tab)
       Dim dXcoord As Double = 0
@@ -580,9 +646,9 @@ Public Class FlatteningCut
       m_CurrProjPage.SetWarningMessage("Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -597,13 +663,15 @@ Public Class FlatteningCut
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -617,10 +685,12 @@ Public Class FlatteningCut
    ' ricavo l'ingombro di lavorazione in funzione dell'utensile selezionato
    Private Function GetFootPrintTool() As Double
       ' vedere nella pagina Allarm il capito "Incisioni"
-      Dim bForceUseMill As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0)
+      Dim bForceUseMill As Boolean = (m_nTool = TOOL.MILL)
       Dim dFootPrint As Double = 0
       ' verifico quale lavorazione è attiva
       If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) AndAlso Not bForceUseMill Then
+         Dim bSetTool As Boolean = EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw)
+         If Not bSetTool Then EgtOutLog("Erro nel settaggio utensile lama " & m_MainWindow.m_CurrentMachine.sCurrSaw)
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dFootPrint)
       ElseIf Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrMilling) Then
          Dim sCurrMill = m_MainWindow.m_CurrentMachine.sCurrMill
@@ -655,18 +725,24 @@ Public Class FlatteningCut
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
+      EgtSetInfo(nCutId, INFO_DIRECTCUT, 1)
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
-      If (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0) Then
+      If (m_nTool = TOOL.MILL) Then
          EgtSetInfo(nCutId, INFO_WIDTH, GetFootPrintTool)
       End If
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, 0)
       ' Imposto prima direzione
       EgtSetInfo(nCutId, INFO_DIR, 1)
+      ' Imposto se iniziare la fresatura dal punto indicato
+      Dim bReducePath As Boolean = Not GetPrivateProfileInt(S_MACH_NEST, K_MACH_STARTCENERTOOLPATH, 0, m_MainWindow.GetMachIniFile()) <> 0
+      If Not bReducePath Then EgtSetInfo(nCutId, INFO_STRICT, 0)
+
       ' Eventuale bloccaggio rotazione asse C tra le passate
       If RotLockChBx.IsChecked Then
          EgtSetInfo(nCutId, INFO_ENABLE_INVERT, False)
       End If
+      EgtSetInfo(nCutId, INFO_STEP_TYPE, m_nMachType)
       ' Funzione che crea i tagli successivi al primo
       MultiplyCut(nLayerId, nCutId)
       ' Creo layer per crocetta di riferimento
@@ -699,10 +775,17 @@ Public Class FlatteningCut
    End Function
 
    Private Function MultiplyCut(nLayerId As Integer, nCutId As Integer) As Boolean
+      Dim bEngWithMill As Boolean = (m_nTool = TOOL.MILL)
+      Dim bReducePath As Boolean = Not GetPrivateProfileInt(S_MACH_NEST, K_MACH_STARTCENERTOOLPATH, 0, m_MainWindow.GetMachIniFile()) <> 0
+
       ' Recupero spessore della lama (utensile) correntemente attiva
       Dim dThick As Double = GetFootPrintTool()
       If dThick = 0 Then Return False
 
+      ' Salvo la prima curva nella lista dei percorsi da concatenare
+      Dim CutsList As New List(Of Integer)
+      CutsList.Add(nCutId)
+
       ' Imposto angolo di rotazione a seconda del lato dei tagli
       Dim dRotAngO As Double = If(SideChBx.IsChecked(), -90, 90)
       ' Definisco vettore di spostamento
@@ -720,6 +803,10 @@ Public Class FlatteningCut
       If nStepNum > 1 Then
          dDelta = dWidth / (nStepNum - 1)
       End If
+      ' definisco la larghezza dell'utensile (solo per la fresa)
+      EgtSetInfo(nCutId, INFO_WIDTH, dThick)
+      ' definisco il tipo di utensile da utilizzare
+      EgtSetInfo(nCutId, "EngravingWithMill", m_nTool)
       ' Creo vettore delta
       vtDelta *= dDelta
       ' Creo indice per impostare info che indica tipologia di spianatura
@@ -728,6 +815,8 @@ Public Class FlatteningCut
          Dim vtPerpMove As Vector3d = Index * vtDelta
          ' Creo copie
          Dim nCut2Id = EgtCopyGlob(nCutId, nLayerId)
+         EgtSetInfo(nCut2Id, INFO_WIDTH, dThick)
+         EgtSetInfo(nCutId, "EngravingWithMill", m_nTool)
          ' Assegno info direzione a seconda del tipo di spianatura
          If TypeCmBx.SelectedIndex = MACH_TYPE.ZIGZAG Then
             If nTypeIndex = 1 Then
@@ -741,10 +830,77 @@ Public Class FlatteningCut
             EgtSetInfo(nCut2Id, INFO_DIR, 1)
          End If
          EgtMove(nCut2Id, vtPerpMove, GDB_RT.GLOB)
+
+         ' ----------------------- CREO SEGMENTI PER CONCATENAMENTO CURVE -----------------------
+         If m_bChainedPath And bEngWithMill Then
+            If bReducePath Then
+               If Index < nStepNum - 1 Then
+                  ExtendLenghtMillPath(nCut2Id, -dThick / 2)
+               ElseIf Index = nStepNum - 1 Then
+                  If nStepNum Mod 2 = 0 Then
+                     ExtendLenghtMillPath(nCut2Id, -dThick / 2, False, True)
+                  Else
+                     ExtendLenghtMillPath(nCut2Id, -dThick / 2, True, False)
+                  End If
+               End If
+            End If
+               CutsList.Add(nCut2Id)
+            End If
+         ' ----------------------- CREO SEGMENTI PER CONCATENAMENTO CURVE -----------------------
+
       Next
+
+      ' ----------------------- CREO UN UNICO PERCORSO CONCATENATO -----------------------
+      If m_bChainedPath And bEngWithMill Then
+         ' Decidere se accorciare i tagli del valore del raggio utensile!
+         If bReducePath Then
+            ExtendLenghtMillPath(CutsList(0), -dThick / 2, False, True)
+         End If
+         For Index As Integer = 0 To CutsList.Count - 2
+            If Index Mod 2 <> 0 Then
+               ' Costruisco la linea di collegamento tra due curve adiacenti
+               Dim PtStart_1 As Point3d
+               EgtStartPoint(CutsList(Index), GDB_RT.GLOB, PtStart_1)
+               Dim PtStart_2 As Point3d
+               EgtStartPoint(CutsList(Index + 1), GDB_RT.GLOB, PtStart_2)
+               CutsList.Add(EgtCreateLine(nLayerId, PtStart_1, PtStart_2))
+            Else
+               ' Costruisco la linea di collegamento tra due curve adiacenti
+               Dim PtStart_1 As Point3d
+               EgtEndPoint(CutsList(Index), GDB_RT.GLOB, PtStart_1)
+               Dim PtStart_2 As Point3d
+               EgtEndPoint(CutsList(Index + 1), GDB_RT.GLOB, PtStart_2)
+               CutsList.Add(EgtCreateLine(nLayerId, PtStart_1, PtStart_2))
+            End If
+         Next
+         Dim ptNear As Point3d
+         EgtStartPoint(CutsList(0), ptNear)
+         Dim IdJointCurv As Integer = EgtCreateCurveCompoByChain(nLayerId, CutsList.ToArray, ptNear, True)
+         EgtSetInfo(IdJointCurv, INFO_DIRECTCUT, 1)
+         EgtSetInfo(IdJointCurv, INFO_STEP_TYPE, m_nMachType)
+         EgtSetInfo(IdJointCurv, INFO_WIDTH, dThick)
+         ' Se unisco il percorso devo per forza usare la fresa!
+         EgtSetInfo(IdJointCurv, "EngravingWithMill", 1)
+         If Not bReducePath Then EgtSetInfo(IdJointCurv, INFO_STRICT, 0)
+      End If
+      ' ----------------------- CREO UN UNICO PERCORSO CONCATENATO -----------------------
+
       Return True
    End Function
 
+   Private Sub ExtendLenghtMillPath(ByVal IdCurv As Integer, ByVal ReduceVal As Double,
+                                    ByVal Optional bStart As Boolean = True, ByVal Optional bEnd As Boolean = True)
+      Dim PtStart As Point3d
+      EgtStartPoint(IdCurv, GDB_RT.GLOB, PtStart)
+      Dim PtEnd As Point3d
+      EgtEndPoint(IdCurv, GDB_RT.GLOB, PtEnd)
+      If bStart Then EgtTrimExtendCurveByLen(IdCurv, ReduceVal, PtStart, GDB_RT.GLOB)
+      If bEnd Then EgtTrimExtendCurveByLen(IdCurv, ReduceVal, PtEnd, GDB_RT.GLOB)
+      Dim dLenLine As Double
+      EgtCurveLength(IdCurv, dLenLine)
+      EgtOutLog("Lunghezza segmento ridotto: " & dLenLine.ToString)
+   End Sub
+
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
       ' Aggiungo crocette
       Dim vtCrossX As New Vector3d(20, 0, 0)

DirectCuts/GridCut.xaml.vb

@@ -38,6 +38,8 @@ Public Class GridCut
    Private m_ptPrev As Point3d
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
+   ' Gestione spessore lama
+   Private m_bSawTh As Boolean = False
 
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
@@ -82,7 +84,12 @@ Public Class GridCut
       m_nNumX = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX, m_MainWindow.GetIniFile())
       m_dDimX = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
       m_nNumY = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY, m_MainWindow.GetIniFile())
-      m_dDimY = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DIMY, m_dDimY, m_MainWindow.GetIniFile())
+      m_dDimY = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMY, m_dDimY, m_MainWindow.GetIniFile())
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       m_bHeadSide = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
       m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
       m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
@@ -141,6 +148,11 @@ Public Class GridCut
       NumPzYTxBx.Text = m_nNumY.ToString()
       DimPzYTxBx.Text = LenToString( m_dDimY, 1)
       SideChBx.IsChecked = m_bHeadSide
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       ' Reset taglio e disabilito bottone esecuzione
       m_bCutOk = False
       UpdateSimulOkBtn()
@@ -248,6 +260,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -260,6 +278,13 @@ Public Class GridCut
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -267,7 +292,7 @@ Public Class GridCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
@@ -275,10 +300,10 @@ Public Class GridCut
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -327,6 +352,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -339,6 +370,13 @@ Public Class GridCut
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -346,7 +384,7 @@ Public Class GridCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
@@ -354,10 +392,10 @@ Public Class GridCut
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -405,7 +443,7 @@ Public Class GridCut
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -523,13 +561,15 @@ Public Class GridCut
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -616,6 +656,15 @@ Public Class GridCut
       If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
          Dim dLenX As Double = dThick + (dDimPzX + dThick) * nNumPzX
          Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
+
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         ' Recupero spessore lama corrente
+         Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutParaId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
          ' Imposto affondamento e angolo di fianco sul taglio
          EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
          EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
@@ -634,6 +683,13 @@ Public Class GridCut
          ' Arretro il punto di partenza di uno spessore lama
          Dim vtDeltaPos As Vector3d = Vector3d.FromPolar(dThick + 0.1, m_dAngO - 90)
          Dim nCutPerpId = EgtCreateLinePDL(nLayerId, ptStart + vtDeltaPos, m_dAngO + 90, dLenY + 0.2)
+
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutPerpId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
          ' Specchio se è attivo il flag che cambia lato di disegno
          If SideChBx.IsChecked() Then
             Dim vtRot As Vector3d = Vector3d.FromPolar(1, m_dAngO + 90)
@@ -656,6 +712,7 @@ Public Class GridCut
    End Function
 
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
+      ptP += New Vector3d(0, 0, 0.15)
       ' Aggiungo crocette
       Dim vtCrossX As New Vector3d(20, 0, 0)
       Dim vtCrossY As New Vector3d(0, 20, 0)

DirectCuts/MachineButtonsUC.xaml.vb

@@ -7,6 +7,8 @@ Public Class MachineButtonsUC
    Private m_DirectCutPage As DirectCutPageUC
    Friend m_CN As CN_generico
 
+   Public nCountButton As Integer = 11
+
    Private m_bOnlyLaser As Boolean = False
    Private m_bFirst As Boolean = True
 
@@ -33,6 +35,7 @@ Public Class MachineButtonsUC
    Private Const BTN_STATE_DOOR_OPENED As String = "DoorOpened"
    Private Const BTN_STATE_DOOR_CLOSED As String = "DoorClosed"
    Private Const BTN_STATE_PARKING As String = "Parking"
+   Private Const BTN_STATE_HOME As String = "Home"
    Private Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
    Private Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
    Private Const BTN_ENABLE_PC As String = "EnablePC"
@@ -76,6 +79,9 @@ Public Class MachineButtonsUC
          GetToggleButton(nIndex + 1).Visibility = Windows.Visibility.Hidden
       Next
 
+      ' notifico nella variabile pubblica il numero di pulsanti inseriti nella barra
+      nCountButton = m_nCount
+
       ' Se variabile di stato "Nothing"/"DoorOpened"/"DoorClosed" imposto immagine fissa
       For nIndex As Integer = 0 To m_nCount - 1
          If StateFlagArray(nIndex) = BTN_STATE_NOTHING OrElse
@@ -267,9 +273,62 @@ Public Class MachineButtonsUC
                   End If
                   Return
                End If
+               ' CONTROLLO FANUC
+            Case 4
+               ' ------------------------------------ FANUC ------------------------------------
+               ' eventuale scrittura di linea di comando MDI
+               If Not String.IsNullOrEmpty(CmdString) Then
+                  ' attivo mpdalità MDI
+                  m_CN.DGeneralFunctions_WriteCncMode(2)
+                  System.Threading.Thread.Sleep(100)
+                  ' salvo la stringa di comando ricevuta dal file lua
+                  m_CN.sz_ManualDataInput = CmdString
+                  ' esguo la funzione che ha il compito di scrivere il comando MDI
+                  m_CN.MDI_command()
+               End If
+               ' attivo modalità AUTO
+               m_CN.DGeneralFunctions_WriteCncMode(7)
+               System.Threading.Thread.Sleep(100)
+               If String.IsNullOrEmpty(EValue) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue As Boolean
+                     If EValue.Trim = "1" Then bEValue = True
+                     m_CN.NC_write_var_bit(ENumber, CBool(EValue))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber, CShort(EValue))
+                  End If
+                  EgtOutLog("Fanuc_DNumber= " & ENumber & " DValue= " & EValue)
+               End If
+               ' eventale caricamento seconda variabile
+               If String.IsNullOrEmpty(EValue2) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber2)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber2)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber2.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue2 As Boolean
+                     If EValue2.Trim = "1" Then bEValue2 = True
+                     m_CN.NC_write_var_bit(ENumber2, CBool(EValue2))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber2, CShort(EValue2))
+                  End If
+                  EgtOutLog("Fanuc_DNumber2= " & ENumber2 & " DValue2= " & EValue2)
+               End If
+               Return
          End Select
       End If
 
+
       Dim nResult As Short
       ' Imposto modalità MDI per controlli num
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
@@ -286,6 +345,8 @@ Public Class MachineButtonsUC
             m_CN.DGeneralFunctions_CycleStart()
          Case 3
             'Per il siemens non devo fare nulla
+         Case 4
+            ' Nicola: 27/03/2023 attivazione della funzione M# indicata?
       End Select
 
       If b2Start Then
@@ -320,6 +381,17 @@ Public Class MachineButtonsUC
          EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)
@@ -640,6 +712,40 @@ Public Class MachineButtonsUC
       End If
    End Sub
 
+   Friend Sub HomeStateChanged(HomeState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_HOME)
+      If nIndex = -1 Then Return
+      If HomeState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
    Friend Sub EnableZoneStateChanged(ZoneState As Integer)
       Dim sFlag As String = String.Empty
       If ZoneState = 1 Then

DirectCuts/ManualAxesMoveUC.xaml.vb

@@ -53,14 +53,43 @@ Public Class ManualAxesMoveUC
       ' Imposto check per considerare spessore lama
       L1SawThChBx.IsChecked = m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove
       L2SawThChBx.IsChecked = m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove
+
+      ' Aggiorno visualizzazione
+      SetMachineInCurrPos()
+      EgtDraw()
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
    End Sub
 
    Private Sub ManualAxesMove_UnLoaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       m_Timer.Stop()
       m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove = (L1SawThChBx.IsEnabled And L1SawThChBx.IsChecked) Or
                                                          (L2SawThChBx.IsEnabled And L2SawThChBx.IsChecked)
+      ' Nascondo la macchina
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+      EgtSetMachineLook(MCH_LOOK.TAB)
+      EgtDraw()
    End Sub
 
+   Private Function SetMachineInCurrPos() As Boolean
+      ' Recupero la posizione macchina
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return False
+      ' Recupero il nome degli assi macchina
+      Dim sL1 As String = String.Empty
+      Dim sL2 As String = String.Empty
+      Dim sL3 As String = String.Empty
+      Dim sR1 As String = String.Empty
+      Dim sR2 As String = String.Empty
+      If Not m_MainWindow.m_CNCommunication.GetAxesNames(sL1, sL2, sL3, sR1, sR2) Then Return False
+      ' Visualizzo macchina in posizione
+      EgtSetAxisPos(sL1, dL1)
+      EgtSetAxisPos(sL2, dL2)
+      EgtSetAxisPos(sL3, dL3)
+      EgtSetAxisPos(sR1, dR1)
+      EgtSetAxisPos(sR2, dR2)
+      Return True
+   End Function
+
    Private Sub UpdateAxesNames()
       Dim sL1 As String = String.Empty
       Dim sL2 As String = String.Empty
@@ -125,11 +154,16 @@ Public Class ManualAxesMoveUC
    Private Sub Timer_tick()
       UpdateAxesNames()
       UpdateUseSawThickness()
+      ' Aggiorno posizione macchina in disegno
+      SetMachineInCurrPos()
+      ' Aggiorno il disegno
+      EgtDraw()
    End Sub
 
    Private m_MoveClicked As Boolean = False
    Private Sub XXBtn_Click(sender As Object, e As MouseButtonEventArgs) Handles L1Btn.PreviewMouseDown, L2Btn.PreviewMouseDown, L3Btn.PreviewMouseDown, R1Btn.PreviewMouseDown, R2Btn.PreviewMouseDown
       If e.ClickCount > 1 OrElse m_MoveClicked Then
+         EgtOutLog(" → Hold on! Do not click compulsively.")
          Return
       End If
       m_MoveClicked = True
@@ -209,13 +243,14 @@ Public Class ManualAxesMoveUC
       System.Threading.Thread.Sleep(150)
       m_CN.DGeneralFunctions_CycleStart()
       System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
-      m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
+      ' m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
       m_MoveClicked = False
    End Sub
 
    Private Sub SiemensMoveAxis(CurrentBtn As Button)
       ' leggo se stato reset
       If Not m_CN.bResetState Then
+         EgtOutLog("Reset status is 'False', is denied to execute file '\DirectCmd\AxesMove.lua'.")
          m_MoveClicked = False
          Return
       End If

DirectCuts/MultipleCut.xaml.vb

@@ -38,7 +38,8 @@ Public Class MultipleCut
    Private m_ptPrev As Point3d
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
-
+   ' Gestione spessore lama
+   Private m_bSawTh As Boolean = False
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
    Private Const MIN_CUT_LEN As Double = 10.0
@@ -90,9 +91,14 @@ Public Class MultipleCut
       m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
       m_dAngV = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_ANGV, m_dAngV, m_MainWindow.GetIniFile())
       For nI As Integer = 0 To 9
-         m_nNum( nI) = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_MULT_NUM & (nI+1).ToString(), 0, m_MainWindow.GetIniFile())
-         m_dDim( nI) = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_DIM & (nI+1).ToString(), 0, m_MainWindow.GetIniFile())
+         m_nNum(nI) = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_MULT_NUM & (nI + 1).ToString(), 0, m_MainWindow.GetIniFile())
+         m_dDim(nI) = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_MULT_DIM & (nI + 1).ToString(), 0, m_MainWindow.GetIniFile())
       Next
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       m_bHeadSide = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_MULT_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
       m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
       m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
@@ -168,6 +174,11 @@ Public Class MultipleCut
       NumPz10TxBx.Text = m_nNum(9).ToString()
       DimPz10TxBx.Text = LenToString( m_dDim(9), 1)
       SideChBx.IsChecked = m_bHeadSide
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       ' Reset taglio e disabilito bottone esecuzione
       m_bCutOk = False
       UpdateSimulOkBtn()
@@ -274,6 +285,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -286,6 +303,13 @@ Public Class MultipleCut
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -293,7 +317,7 @@ Public Class MultipleCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
 
@@ -303,10 +327,10 @@ Public Class MultipleCut
             EgtSetCalcTool(sTool, sHead, nExit)
 
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -354,6 +378,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -366,6 +396,13 @@ Public Class MultipleCut
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -373,7 +410,7 @@ Public Class MultipleCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
@@ -381,10 +418,10 @@ Public Class MultipleCut
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -435,7 +472,7 @@ Public Class MultipleCut
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -569,13 +606,15 @@ Public Class MultipleCut
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -606,6 +645,22 @@ Public Class MultipleCut
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      ' Recupero spessore lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      EgtTdbSetCurrTool(sSaw)
+      Dim dThick As Double = 0
+      ' Se è impostata una lavorazione di lama
+      If Not String.IsNullOrEmpty(sSawing) Then
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      End If
+      If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+         EgtOffsetCurve(nCutId, -dThick, OFF_TYPE.EXTEND)
+      End If
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, m_dAngV)
@@ -698,6 +753,7 @@ Public Class MultipleCut
    End Function
 
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
+      ptP += New Vector3d(0, 0, 0.15)
       ' Aggiungo crocette
       Dim vtCrossX As New Vector3d(20, 0, 0)
       Dim vtCrossY As New Vector3d(0, 20, 0)

DirectCuts/Polishing.xaml.vb

@@ -180,13 +180,15 @@ Public Class Polishing
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub

DirectCuts/SawTestUC.xaml.vb

@@ -210,17 +210,30 @@ Public Class SawTestUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         EgtSetCalcTool(m_sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
          ' Altrimenti da lama
@@ -228,10 +241,10 @@ Public Class SawTestUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -280,17 +293,30 @@ Public Class SawTestUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         EgtSetCalcTool(m_sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
          ' Altrimenti da lama
@@ -298,10 +324,10 @@ Public Class SawTestUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -351,7 +377,7 @@ Public Class SawTestUC
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -450,13 +476,15 @@ Public Class SawTestUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -502,6 +530,10 @@ Public Class SawTestUC
       ElseIf nWSide = MCH_SAW_WS.LEFT Then
          vtPerp = vtDir
          vtPerp.Rotate(Vector3d.Z_AX, +90)
+      Else
+         m_CurrProjPage.ClearMessage()
+         ' 91143 = Set machining side: right or left.
+         m_CurrProjPage.SetInfoMessage(EgtMsg(91143))
       End If
       Dim ptEnd As Point3d = ptStart + vtDir * m_dLen + vtPerp * dThick
       Dim dLen2 As Double = m_dLen / 2

DirectCuts/SingleCutUC.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Threading
+Imports EgtUILib
 
 Public Class SingleCutUC
 
@@ -39,10 +40,14 @@ Public Class SingleCutUC
    Private m_nTempLay As Integer = GDB_ID.NULL
 
    ' Costanti
-   Private Const MAX_TAB_DEPTH As Double = 10.0
+   Private Const MAX_TAB_DEPTH As Double = 10.0  ' sostituita da un m_MaxTabDepth letto da file ini macchina
    Private Const MIN_CUT_LEN As Double = 10.0
    Private Const MAX_SIDE_ANG As Double = 60.0
    ' Costanti che indicano la modalità di acquisizione dei punti
+
+   ' Utilizzato per aggiornare la posizione della macchina
+   Private m_RefreshTimer As New DispatcherTimer
+
    Private Enum PT_MODE As Integer
       SAW = 0
       LASER = 1
@@ -68,14 +73,14 @@ Public Class SingleCutUC
       SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
       OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dAngV = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dLen = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_ANGV, m_dAngV, m_MainWindow.GetIniFile())
       m_dOffset = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_OFFSET, m_dOffset, m_MainWindow.GetIniFile())
       m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
-      m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
    End Sub
 
    Private Sub SingleCut_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -92,6 +97,10 @@ Public Class SingleCutUC
          m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
          EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
          EgtDraw()
+         ' riavvio il timer per visualizzare la poszione della macchina
+         If Not IsNothing(m_RefreshTimer) Then
+            m_RefreshTimer.Start()
+         End If
          Return
       End If
       ' Disabilito registrazione progetto modificato
@@ -114,7 +123,7 @@ Public Class SingleCutUC
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -138,21 +147,40 @@ Public Class SingleCutUC
       ' Deseleziono bottone primo punto
       Point1Btn.IsChecked = False
 
-      ' la visualizzazione dei comandi è gestira dalla DirectCutPageUC richiamando la funzione ReloadParam
+      ' la visualizzazione dei comandi è gestita dalla DirectCutPageUC richiamando la funzione ReloadParam
+
+      ' forzo la macchina ad essere visibile fin da subito
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
+      m_MainWindow.m_DirectCutPageUC.m_nMachLook = MCH_LOOK.TAB
+      ' Creo il timer il timer per aggiornare il posizionamento della macchina
+      AddHandler m_RefreshTimer.Tick, AddressOf RefreshTimer_tick
+      m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(1000)
 
       ' Aggiorno visualizzazione
       EgtDraw()
+
+      ' Avvi il timer
+      m_RefreshTimer.Start()
+   End Sub
+
+   Private Sub RefreshTimer_tick()
+      ' se è impostata la visualizzazione della sola tavola allora non aggiorno il disegno
+      If m_MainWindow.m_DirectCutPageUC.m_nMachLook = MCH_LOOK.TAB Then Return
+      ' Aggiorno visualizzazione
+      SetMachineInCurrPos()
+      ' Aggiorno il disegno
+      EgtDraw()
    End Sub
 
    Friend Sub SingleCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_LENGTH, DoubleToString( m_dLen, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_ANGV, DoubleToString( m_dAngV, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_LENGTH, DoubleToString(m_dLen, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_ANGV, DoubleToString(m_dAngV, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_OFFSET, DoubleToString(m_dOffset, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_SAWTH, If(m_bSawTh, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
       ' Se non vado in simulazione
       If Not m_bSimul Then
@@ -171,6 +199,8 @@ Public Class SingleCutUC
          EgtSetMachineLook(MCH_LOOK.TAB)
          EgtDraw()
       End If
+      ' interrompo il Timer per aggiornare la visualizzazione del posizionamento macchina 
+      m_RefreshTimer.Stop()
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
@@ -238,6 +268,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -249,6 +285,13 @@ Public Class SingleCutUC
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -256,7 +299,8 @@ Public Class SingleCutUC
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
+            EgtOutLog("Coordinate punto 1 da H3: " & m_ptTipP1.x.ToString & " ," & m_ptTipP1.y.ToString)
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
@@ -264,10 +308,11 @@ Public Class SingleCutUC
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
+            EgtOutLog("Coordinate punto 1 da H1: " & m_ptTipP1.x.ToString & " ," & m_ptTipP1.y.ToString)
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -279,7 +324,7 @@ Public Class SingleCutUC
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP1
          m_ptTipP1 = m_ptPrev
@@ -288,7 +333,6 @@ Public Class SingleCutUC
          m_bPointP1Ok = True
          ' Reimposto eventuale precedente utensile
          EgtSetCalcTool(sTool, sHead, nExit)
-
       End If
 
       ' Disegno il taglio
@@ -298,6 +342,7 @@ Public Class SingleCutUC
       m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
       EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
       EgtDraw()
+
       ' Seleziono il bottone per indicare che il primo punto è stato acquisito
       Point1Btn.IsChecked = True
       ' Abilito e deseleziono secondo punto
@@ -317,6 +362,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
       ' Recupero dati utensile e testa corrente
       Dim sTool As String = ""
       Dim sHead As String = ""
@@ -328,6 +379,13 @@ Public Class SingleCutUC
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -335,20 +393,20 @@ Public Class SingleCutUC
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
+            EgtOutLog("Coordinate punto 2 da H3: " & m_ptTipP2.x.ToString & " ," & m_ptTipP2.y.ToString)
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
-
             ' Altrimenti da lama
          Else
             ' Reimposto eventuale precedente utensile
             EgtSetCalcTool(sTool, sHead, nExit)
 
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -358,7 +416,7 @@ Public Class SingleCutUC
          m_dAngV = 90 - dTAngV
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
@@ -381,6 +439,7 @@ Public Class SingleCutUC
          m_dAngO = dAngOrizzDeg
          LenghtTxBx.Text = LenToString(m_dLen, 1)
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+         EgtOutLog("Lunghezza taglio: " & dLen.ToString & "Angolo: " & dAngOrizzDeg.ToString)
          CreateSingleCut()
          ' Disegno la macchina nella sua posizione reale
          SetMachineInCurrPos()
@@ -398,7 +457,7 @@ Public Class SingleCutUC
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -476,7 +535,7 @@ Public Class SingleCutUC
       EgtDraw()
    End Sub
 
-   Private Sub SawThick_Click( sender As Object, e As RoutedEventArgs) Handles SawThChBx.Click
+   Private Sub SawThick_Click(sender As Object, e As RoutedEventArgs) Handles SawThChBx.Click
       ' Recupero lo stato di check
       m_bSawTh = SawThChBx.IsChecked()
       ' Disegno il taglio
@@ -536,9 +595,9 @@ Public Class SingleCutUC
       m_CurrProjPage.SetWarningMessage( "Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -553,13 +612,15 @@ Public Class SingleCutUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -571,6 +632,7 @@ Public Class SingleCutUC
    Private Function CreateSingleCut() As Boolean
       ' Verifico sia definito il punto iniziale e il grezzo
       If Not m_bPointP1Ok Or Not m_bRawOk Then
+         EgtOutLog("Primo punto non valido")
          m_bCutOk = False
          Return False
       End If
@@ -583,7 +645,7 @@ Public Class SingleCutUC
       Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       EgtTdbSetCurrTool(sSaw)
       Dim dThick As Double = 0
-      ' se è impostata una lavorazione di lama
+      ' Se è impostata una lavorazione di lama
       If Not String.IsNullOrEmpty(sSawing) Then
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       End If
@@ -599,14 +661,19 @@ Public Class SingleCutUC
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
-      If Math.Abs(m_dOffset) > 10 * EPS_SMALL Then
-         Dim dTotOffset = m_dOffset
-         If m_bSawTh Then dTotOffset += If( m_dOffset > 0, dThick, -dThick)
+      ' Applico la correzione di spessore lama -> anche se Offset=0! ver_2.5b1
+      Dim dTotOffset = m_dOffset
+      If m_bSawTh Then
+         dTotOffset += If(m_dOffset > 0, dThick, -dThick)
+         EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
+      Else
          EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
       End If
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, m_dAngV)
+      ' Imposto se disabilitare l'inversine di direzione del taglio
+      If Not m_MainWindow.m_CurrentMachine.bEnableInvert Then EgtSetInfo(nCutId, INFO_ENABLE_INVERT, 0)
       ' Creo layer per crocetta di riferimento
       Dim nCrossLayerId = EgtCreateGroup(nPartId)
       ' Aggiungo crocetta/e

DirectCuts/SingleDrillUC.xaml.vb

@@ -72,7 +72,10 @@ Public Class SingleDrillUC
    Private Sub SingleDrill_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       m_sCurrDrill = m_CurrentMachine.sCurrDrill
       GetDrillFromDrilling(m_sCurrDrill, m_CurrentMachine.sCurrDrilling)
-
+      ' rimuovo utensile su uscite 1
+      EgtSetCalcTool("", "H1", 1)
+      ' imposto utensile su uscita 2
+      EgtSetCalcTool(m_sCurrDrill, "H1", 2)
       ' recupero informazioni del foretto usato
       EgtTdbSetCurrTool(m_sCurrDrill)
       EgtTdbGetCurrToolParam(MCH_TP.DIAM, m_dDiameter)
@@ -213,21 +216,33 @@ Public Class SingleDrillUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sDrill As String = m_sCurrDrill
+      If bIsMultiCut Then
+         EgtSetCalcTool(sDrill, "H1", 2)
+      End If
+
       ' Se acquisizione lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.DRILL Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-
-         ' Ricavo dati Foretto corrente
-         Dim sDrill As String = m_sCurrDrill
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
             ' Altrimenti da lama
@@ -235,10 +250,10 @@ Public Class SingleDrillUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -250,10 +265,8 @@ Public Class SingleDrillUC
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sDrill As String = m_sCurrDrill
          ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sDrill, "H1", 1) Then Return
+         If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
       End If
 
       ' Disegno il taglio
@@ -371,8 +384,10 @@ Public Class SingleDrillUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
@@ -431,9 +446,9 @@ Public Class SingleDrillUC
       ptIns.z = dRawHeight
       ' Inserisco il pezzo nel grezzo
       EgtAddPartToRawPart(nPartId, ptIns, m_MainWindow.m_CurrentProjectPageUC.m_nRawId)
+      EgtSetCurrPhase(1)
       ' Inserisco la lavorazione
       m_bCutOk = AddMachinings(nPartId) AndAlso UpdateAllMachiningsToolpaths()
-      EgtSetCurrPhase(1)
       ' Eventuale eliminazione Home finale
       If Not m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome Then
          RemoveFinalHome()

DirectCuts/SquaringUC.xaml.vb

@@ -287,8 +287,10 @@ Public Class SquaringUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
@@ -348,6 +350,7 @@ Public Class SquaringUC
       EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
       Dim dThick As Double = 0
       EgtTdbGetCurrToolParam(If(nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
+      EgtOutLog("Curr tool type in use for squaring: " & If(nType = MCH_TY.SAW_STD, "SAW_STD", "NOT 'SAW_STD'"))
       ' Ricalcolo lo spessore in base all'inclinazione
       dThick = dThick / Math.Cos(m_dAngV * Math.PI / 180)
       ' Imposto angolo di rotazione a seconda del lato dei tagli paralleli
@@ -365,9 +368,12 @@ Public Class SquaringUC
       If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
          Dim dLenX As Double = dThick + (dDimPzX + dThick) * nNumPzX
          Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
-         ' Imposto affondamento e angolo di fianco sul taglio
-         EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
-         EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
+         ' Imposto affondamento e angolo di fianco sul taglio (solo se non lama STD)
+         If Not nType = MCH_TY.SAW_STD Then
+            EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
+            EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
+            EgtOutLog("Curr tool in use is not of type SAW_STD: Depth is limited to raw thickness")
+         End If
          ' Allungo la geometria
          EgtExtendCurveStartByLen(nCutParaId, m_dOffsetSquaring + m_dExtraLength)
          EgtExtendCurveEndByLen(nCutParaId, m_dOffsetSquaring + +m_dExtraLength)

DirectCuts/VacuumMachineButtonUC.xaml.vb

@@ -22,6 +22,9 @@ Public Class VacuumMachineButtonUC
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
 
+   ' visualizzo l'elenco degli elementi della pagina sono al primo avvio
+   Friend m_OutLogTypeButton As Boolean = True
+
    ' Creazione converter da String a ImageSource
    Dim ImageConverter As New ImageSourceConverter
 
@@ -71,10 +74,37 @@ Public Class VacuumMachineButtonUC
                If Not IsNothing(ButtonToAdd) Then m_ButtonList.Add(ButtonToAdd)
             End If
          End While
+
+         For Each MachineButton As MachineButton In m_ButtonList
+            OutLogTypeButton(MachineButton)
+         Next
+         m_OutLogTypeButton = False
+
          NotifyPropertyChanged("ButtonList")
       End If
    End Sub
 
+#Region "STATE CHANGED"
+   ' ------------------------------------------------------------------------------
+   ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
+   '-------------------------------------------------------------------------------
+
+   Friend Sub OutLogTypeButton(CurrMachineButton As MachineButton)
+      If Not m_OutLogTypeButton Then Return
+      Dim BtnType As Type = CurrMachineButton.GetType
+      If BtnType Is GetType(NoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(0) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(TwoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(1) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(ThreeStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(2) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(DoubleCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(3) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(PressedCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(4) ") & " , " & CurrMachineButton.StateFlag)
+      End If
+   End Sub
+
    Friend Sub VacuumUpChanged(VacuumUpState As Boolean)
       Dim VacuumUpButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
@@ -371,6 +401,8 @@ Public Class VacuumMachineButtonUC
       Next
    End Sub
 
+#End Region    ' State Range
+
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
                          ByVal lpKeyName As String,

DrawImport/CompoDimensionUC.xaml.vb

@@ -37,7 +37,7 @@ Public Class CompoDimensionUC
       InternComponentBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 47)     ' Componenti interni
       If Not String.IsNullOrEmpty(sCompoDir) Then
          bEnableAlzFront = True
-         AlzFrontBtn.Content = "Alzatine & Frontalini"
+         AlzFrontBtn.Content = EgtMsg(91137)
       Else
          AlzFrontBtn.Visibility = Visibility.Collapsed
       End If
@@ -107,8 +107,10 @@ Public Class CompoDimensionUC
    Friend Sub ShowAlzFrontBtn(ByVal value As Boolean)
       If value Then
          AlzFrontBtn.Visibility = Visibility.Visible
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Hidden
       Else
          AlzFrontBtn.Visibility = Visibility.Hidden
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Visible
       End If
    End Sub
 

DrawImport/DrawPageUC.xaml.vb

@@ -283,6 +283,19 @@ Public Class DrawPageUC
       m_sCsvOrder = ""
       m_sCsvList = ""
       m_sCsvName = ""
+
+      ' Visuliazzazione dei bottoni per modifica dei componenti
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         SideAngleBtn.Visibility = Visibility.Hidden
+         FiloTopBtn.Visibility = Visibility.Hidden
+         EngraveBtn.Visibility = Visibility.Hidden
+         DripCutBtn.Visibility = Visibility.Hidden
+      Else
+         SideAngleBtn.Visibility = Visibility.Visible
+         FiloTopBtn.Visibility = Visibility.Visible
+         EngraveBtn.Visibility = Visibility.Visible
+         DripCutBtn.Visibility = Visibility.Visible
+      End If
    End Sub
 
    ' recupero il click sulla scena ed assegno il metodo a secondo della pagina aperta
@@ -553,6 +566,7 @@ Public Class DrawPageUC
       OkBtn.IsEnabled = True
    End Sub
 
+   ' Navigazione nelle due pagine per la selezione dei componenti da disegnare
    Friend Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       DrawPage_Unloaded(sender, e)
@@ -1124,6 +1138,33 @@ Public Class DrawPageUC
       Return True
    End Function
 
+   Private Function MakeSectionFrameInsert(ByVal nNbr As Integer) As Boolean
+      ' m_MainWindow.m_ImportPageUC.LoadFrame()
+      ' recupero il primo layer del primo pezzo
+      Dim nLayerId As Integer = EgtGetFirstLayer(EgtGetFirstPart())
+      If nLayerId = GDB_ID.NULL Then Return False
+      ' percorso in cui salvare tempora
+      Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\Frame.Nge"
+      If Not EgtSaveObjToFile(nLayerId, sTmpFile, NGE.BIN) Then Return False
+      ' Passo al contesto principale
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' Inserisco il pezzo
+      If Not My.Computer.FileSystem.FileExists(sTmpFile) Then Return False
+      ' eseguo inserimento
+      For i As Integer = 1 To nNbr
+         EgtInsertFile(sTmpFile)
+         ' Ne recupero l'Id
+         Dim nPartId As Integer = EgtGetLastPart()
+         ' Creo la cornice
+         m_MainWindow.m_FrameCutPageUC.CreateFrame(nPartId)
+         ' Ricalcolo lavorazioni
+         AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
+      Next
+      ' Cancello il file
+      My.Computer.FileSystem.DeleteFile(sTmpFile)
+      Return True
+   End Function
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_bBackFromInternalCompo = False
       m_bInternalCompo = False
@@ -1139,22 +1180,47 @@ Public Class DrawPageUC
       Dim InsNbr As Integer = Int32.Parse(PartNumTxBx.Text)
       ' Passo al contesto principale
       'MakeInsert(InsNbr, sPartName)
-      MakeMultipleInsert(InsNbr, sPartName)
-      ' Aggiorno ambiente principale
-      EgtZoom(ZM.ALL)
-      ' Elimino nome del componente precedente
-      m_sCompoName = String.Empty
-      ' Reset inclinazioni
-      m_SideAngleUC.DeleteSideAngle()
-      ' Chiudo compo interni nel caso siano aperti
-      LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
-      LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
-      LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
-      ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
-      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
-      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         MakeSectionFrameInsert(InsNbr)
+      Else
+         MakeMultipleInsert(InsNbr, sPartName)
+      End If
+      ' Attivo il parcheggio dei pezzi Draw (per il corretto posizionamento nella scena)
+      ActivateParkIndZero()
+      Dim bExitPage As Boolean = GetPrivateProfileInt(S_GENERAL, K_QUITDRAWPAGE, 1, m_MainWindow.GetIniFile) <> 0
+      ' Se Shift premuto eseguo il contrario
+      If Keyboard.Modifiers And ModifierKeys.Shift Then
+         bExitPage = Not bExitPage
+      End If
+      If bExitPage Then
+         ' Aggiorno ambiente principale
+         EgtZoom(ZM.ALL)
+         ' Elimino nome del componente precedente
+         m_sCompoName = String.Empty
+         ' Reset inclinazioni
+         m_SideAngleUC.DeleteSideAngle()
+         ' Chiudo compo interni nel caso siano aperti
+         LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
+         LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
+         LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
+         ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
+         m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
+      Else
+         m_SceneButtons.MeasureBtn.IsChecked = False
+         DrawPage_Unloaded(sender, e)
+         ' Elimino nome del componente precedente
+         m_sCompoName = String.Empty
+         ' Reset inclinazioni
+         m_SideAngleUC.DeleteSideAngle()
+         If String.IsNullOrEmpty(m_MainComponentPage.m_SecondaryComponentPage.m_sCurrCompo) Then
+            DrawPage_Loaded(sender, e)
+         Else
+            LoadSecondaryPage()
+         End If
 
+      End If
    End Sub
 
    ' esco dalla pagina corrente
@@ -1174,7 +1240,25 @@ Public Class DrawPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
+
+   End Sub
+
+   Private Sub ActivateParkIndZero()
+      ' Aggiorno la gestione dei parcheggi: spengo tutti i parcheggi tranne quello dei pezzi disegnati "0"
+      Dim ListParkInd As New List(Of ParkInd)
+      SelParkIndWD.LoadParkInd(ListParkInd)
+      For Each ItemParkInd As ParkInd In ListParkInd
+         If ItemParkInd.Ind = 0 Then
+            ItemParkInd.Status = GDB_ST.ON_
+         Else
+            ItemParkInd.Status = GDB_ST.OFF
+         End If
+      Next
+      ' Aggiorno lo stato dei pezzi 
+      For Each Item As ParkInd In ListParkInd
+         SelParkIndWD.SetStatusPartInParkInd(Item, False)
+      Next
    End Sub
 
    Private Sub TrfDataBtn_Click(sender As Object, e As RoutedEventArgs) Handles TrfDataBtn.Click
@@ -1446,17 +1530,39 @@ Public Class DrawPageUC
       ' Seleziono la Tab e la Page di apertura
       Select Case m_ActiveComponentPage
          Case Pages.MainComponent
-            LeftButtonGrd.Children.Remove( m_MainComponentPage)
+            LeftButtonGrd.Children.Remove(m_MainComponentPage)
+
          Case Pages.SecondaryComponent
-            LeftButtonGrd.Children.Remove( m_MainComponentPage.m_SecondaryComponentPage)
+            LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
+
          Case Pages.InternalComponent
-            LeftButtonGrd.Children.Remove( m_MainWindow.m_DrawPageUC.m_CompoDimension.m_InternalCompoPage)
+            LeftButtonGrd.Children.Remove(m_MainWindow.m_DrawPageUC.m_CompoDimension.m_InternalCompoPage)
+
          Case Pages.CompoDimension
-            VariablesGrd.Children.Remove( m_CompoDimension)
+            VariablesGrd.Children.Remove(m_CompoDimension)
+
          Case Pages.SideAngle
-            VariablesGrd.Children.Remove( m_SideAngleUC)
+            Select Case m_SideAngleUC.m_Mode
+               Case SideAngleUC.ModeOpt.SIDEANGLE
+                  SideAngleBtn.IsChecked = False
+                  SideAngleBtn_Click(Nothing, Nothing)
+               Case SideAngleUC.ModeOpt.ENGRAVE
+                  EngraveBtn.IsChecked = False
+                  EngraveBtn_Click(Nothing, Nothing)
+               Case SideAngleUC.ModeOpt.DRIP
+                  DripCutBtn.IsChecked = False
+                  DripCutBtn_Click(Nothing, Nothing)
+            End Select
+            VariablesGrd.Children.Remove(m_SideAngleUC)
+
          Case Pages.FiloTop
+            FiloTopBtn.IsChecked = False
+            FiloTopBtn_Click(Nothing, Nothing)
             VariablesGrd.Children.Remove(m_FiloTopUC)
+
+         Case Pages.AlzFront
+            LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
+
       End Select
 
       ' Pulisco l'ambiente lua

DrawImport/FiloTopUC.xaml.vb

@@ -38,17 +38,18 @@ Public Class FiloTopUC
       m_CallingPage = m_MainWindow.m_ActivePage
 
       ' Imposto messaggi
-      ParameterTxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 10)       ' Offset
-      Parameter2TxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      ParameterTxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 10)       ' Offset
+      Parameter2TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter3TxBl.Text = EgtMsg(91138)
 
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Imposto questa come pagina correntemente visualizzata nella drawpage
          m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.FiloTop
          ' Imposto contesto corrente
-         EgtSetCurrentContext( m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
+         EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
       ElseIf m_CallingPage = MainWindow.Pages.Import Then
          ' Imposto contesto corrente
-         EgtSetCurrentContext( m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
+         EgtSetCurrentContext(m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
       End If
 
       ' Gestisco visualizzazione dei parametri
@@ -57,9 +58,9 @@ Public Class FiloTopUC
       Parameter3TxBl.Visibility = Windows.Visibility.Visible
 
       ' Aggiorno valori
-      m_dFiloTopOffset = GetPrivateProfileDouble( S_SIDES, K_FILOTOPOFFSET, 5, m_MainWindow.GetIniFile())
-      ParameterTxBx.Text = LenToString( m_dFiloTopOffset, 3)
-      m_dFiloTopDepth = GetPrivateProfileDouble( S_SIDES, K_FILOTOPDEPTH, 5, m_MainWindow.GetIniFile())
+      m_dFiloTopOffset = GetPrivateProfileDouble(S_SIDES, K_FILOTOPOFFSET, 5, m_MainWindow.GetIniFile())
+      ParameterTxBx.Text = LenToString(m_dFiloTopOffset, 3)
+      m_dFiloTopDepth = GetPrivateProfileDouble(S_SIDES, K_FILOTOPDEPTH, 5, m_MainWindow.GetIniFile())
       Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
       m_bCornerradius = GetPrivateProfileInt(S_SIDES, K_ROUNDOFF, 0, m_MainWindow.GetIniFile()) <> 0
       Parameter3ChBx.IsChecked = m_bCornerradius
@@ -80,8 +81,8 @@ Public Class FiloTopUC
          Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
          While nLayId <> GDB_ID.NULL
             Dim sLayName As String = ""
-            If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-               EgtSetInfo( nLayId, INFO_OFFSET, m_dFiloTopOffset)
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_OFFSET, m_dFiloTopOffset)
             End If
             nLayId = EgtGetNextLayer(nLayId)
          End While
@@ -101,8 +102,8 @@ Public Class FiloTopUC
          Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
          While nLayId <> GDB_ID.NULL
             Dim sLayName As String = ""
-            If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-               EgtSetInfo( nLayId, INFO_DEPTH, m_dFiloTopDepth)
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_DEPTH, m_dFiloTopDepth)
             End If
             nLayId = EgtGetNextLayer(nLayId)
          End While
@@ -214,10 +215,13 @@ Public Class FiloTopUC
                   EgtErase(nLayFiloTop)
                   EgtRemoveInfo(nLayId, "FiloTopRef")
                   EgtOutLog("Error in generation OffsetPreView in TopEgde ")
+               Else
+                  m_MainWindow.m_DrawPageUC.MessageTxBx.Text = ""
+                  m_MainWindow.m_DrawPageUC.MessageBrd.Background = Brushes.Transparent
                End If
                ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
             End If
-               nLayId = EgtGetNextLayer(nLayId)
+            nLayId = EgtGetNextLayer(nLayId)
          End While
          nPartId = EgtGetNextPart(nPartId)
       End While

DrawImport/ImportPageUC.xaml

@@ -7,58 +7,60 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="ImportPage_Initialized" Loaded="ImportPage_Loaded" Unloaded="ImportPage_Unloaded">
 
-   <!-- Definizione della ImportPage -->
-   <Border>
-      <Grid Name="ImportPageGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="3*"/>
-            <ColumnDefinition Width="12*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="8*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
-
-         
-         <!-- Definizione della Grid superiore per Button -->
-         <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
+    <!-- Definizione della ImportPage -->
+    <Border>
+        <Grid Name="ImportPageGrid" >
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="7*"/>
+                <ColumnDefinition Width="3*"/>
+                <ColumnDefinition Width="12*"/>
             </Grid.ColumnDefinitions>
-
-            <ToggleButton Name="SideAngleBtn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="FiloTopBtn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="DripCutBtn" Grid.Column="2" Padding="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="DripDrillBtn" Grid.Column="3" Padding="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <Button Name="Cad2dBtn" Grid.Column="4" Padding="0"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-         </Grid>
-
-         <!-- Definizione della Grid laterale -->
-         <Grid Name="LeftGrid" Grid.RowSpan="3">
             <Grid.RowDefinitions>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="7.25*"/>
-               <RowDefinition Height="0.75*"/>
-               <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="8*"/>
+                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
-            <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
+
+            <!-- Definizione della Grid superiore per Button -->
+            <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="7*"/>
+                </Grid.ColumnDefinitions>
+
+                <ToggleButton Name="SideAngleBtn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="FiloTopBtn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="DripCutBtn" Grid.Column="2" Padding="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="EngraveBtn" Grid.Column="2"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="DripDrillBtn" Grid.Column="3" Padding="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <Button Name="Cad2dBtn" Grid.Column="4" Padding="0"
+               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            </Grid>
+
+            <!-- Definizione della Grid laterale -->
+            <Grid Name="LeftGrid" Grid.RowSpan="3">
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="7.25*"/>
+                    <RowDefinition Height="0.75*"/>
+                    <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
+
+                <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
                      ItemsSource="{Binding ItemList}"/>
 
-                <Grid Grid.Row="3" Margin="0,0,8,0">
+                <Grid Name="FinderGrd"  Grid.Row="3" Margin="0,0,8,0">
                     <Grid.ColumnDefinitions>
                         <ColumnDefinition Width="4*"/>
                         <ColumnDefinition Width="1*"/>
@@ -68,68 +70,68 @@
                     <Button Name="ClearFindBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Margin="0,6,2,6">
                         <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}" Width="30" />
                     </Button>
-                </Grid> 
-            
-            <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
-               <TextBlock Name="MessageTxBx" TextAlignment="Center"
+                </Grid>
+
+                <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
+                    <TextBlock Name="MessageTxBx" TextAlignment="Center"
                    Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            </Border>
+                </Border>
 
-         </Grid>
-
-         <!-- Definizione della Grid inferiore per Button -->
-         <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-
-            <Button Name="UseLayerBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="UseClosedCurveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="UseRegionBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="ResetBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-            <RadioButton Name="mmBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
-            <RadioButton Name="inchBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-
-            <Button Name="OrderListBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-            <ToggleButton Name="TopBtn" Grid.Column="7" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
-
-            <Grid Name="PartNumberGrd" Grid.Column="8" Grid.ColumnSpan="2">
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
-
-               <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
-                  TextAlignment="Right"/>
-               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
-                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             </Grid>
 
-            <Button Name="OkBtn" Grid.Column="10" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
+            <!-- Definizione della Grid inferiore per Button -->
+            <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="UseLayerBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="UseClosedCurveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="UseRegionBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="ResetBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+                <RadioButton Name="mmBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
+                <RadioButton Name="inchBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+
+                <Button Name="OrderListBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+                <ToggleButton Name="TopBtn" Grid.Column="7" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
+
+                <Grid Name="PartNumberGrd" Grid.Column="8" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+
+                    <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
+                  TextAlignment="Right"/>
+                    <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
+                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                </Grid>
+
+                <Button Name="OkBtn" Grid.Column="10" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+                <Button Name="ExitBtn" Grid.Column="11" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
 
-            <Button Name="ExitBtn" Grid.Column="11" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-            
-         </Grid>
-         
-      </Grid>
-      
-   </Border>
-   
 </UserControl>

DrawImport/ImportPageUC.xaml.vb

@@ -19,6 +19,9 @@ Public Class ImportPageUC
    Friend WithEvents ImportScene As New Scene
    Private ImportSceneHost As New System.Windows.Forms.Integration.WindowsFormsHost
 
+   Private m_SelListHole As New List(Of Integer)
+   Private m_DeselectListHole As New List(Of Integer)
+
    ' Properties
    Private m_sCurrDir As String = String.Empty
    Private m_sCurrFile As String = String.Empty
@@ -35,6 +38,8 @@ Public Class ImportPageUC
    Private Const FT_TRF As Integer = 51
    ' Costante per formato CUT
    Private Const FT_CUT As Integer = 52
+   ' Indice del parcheggio corrente
+   Private NewParkInd As Integer = 0
 
    ' Indentificativo del pezzo selezionato
    Private m_nSelectedPart As Integer = GDB_ID.NULL
@@ -79,12 +84,13 @@ Public Class ImportPageUC
       ResetBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 3)                 'Reset
       mmBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 4)                    'mm
       inchBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 5)                  'inch
-      OrderListBtn.Content = EgtMsg( 90398)                           'Dati Csv
-      TopBtn.Content = EgtMsg( 90384)                                 'Indica Lato Sopra
+      OrderListBtn.Content = EgtMsg(90398)                           'Dati Csv
+      TopBtn.Content = EgtMsg(90384)                                 'Indica Lato Sopra
       PartNumTxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 15)                'Numero
       SideAngleBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 7)             'Inclina lati
-      FiloTopBtn.Content = EgtMsg( 90400)                             'Filo Top
+      FiloTopBtn.Content = EgtMsg(90400)                             'Filo Top
       DripCutBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 8)               'Incidi da sotto
+      EngraveBtn.Content = "Engrave"
       DripDrillBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 14)            'Foro da sotto
       Cad2dBtn.Content = "Cad 2d"
 
@@ -94,13 +100,14 @@ Public Class ImportPageUC
    End Sub
 
    Private Sub ImportPage_Loaded(sender As Object, e As RoutedEventArgs)
-
       ' abilitazione importazione TRF
       m_bEnableTrf = (m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut And
                       m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.TRF_IMPORT))
       ' abilitazione Ordine e Distinta per importazione DXF
       m_bEnableOrderList = (m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut And
                             GetPrivateProfileInt(S_COMPO, K_CSVDATA, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' rendo visibilie il pulsante di ricerca file
+      FinderGrd.Visibility = Visibility.Visible
 
       If m_bFirst Then
          ' imposto colore di default
@@ -154,10 +161,14 @@ Public Class ImportPageUC
       ' Verifico esistenza Cad 2d
       GetPrivateProfileString(S_CAD2D, K_CAD2D_NAME, "", m_sCad2dName, m_MainWindow.GetIniFile())
       GetPrivateProfileString(S_CAD2D, K_CAD2D_EXEPATH, "", m_sCad2dPath, m_MainWindow.GetIniFile())
-      Cad2dBtn.IsEnabled = My.Computer.FileSystem.FileExists( m_sCad2dPath)
+      Cad2dBtn.IsEnabled = My.Computer.FileSystem.FileExists(m_sCad2dPath)
 
       ' Pulisco tutto
       ClearView()
+      ' Definizione di quale comando deve essere visualizzato
+      DripCutBtn.Visibility = If(String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw), Visibility.Hidden, Visibility.Visible)
+      EngraveBtn.Visibility = If(DripCutBtn.Visibility <> Visibility.Visible, Visibility.Visible, Visibility.Hidden)
+
       FileListBox.UnselectAll()
       ' inibisco selezione diretta da Scene
       ImportScene.SetStatusNull()
@@ -169,7 +180,7 @@ Public Class ImportPageUC
          UseClosedCurveBtn.Visibility = Windows.Visibility.Visible
          ResetBtn.Visibility = Windows.Visibility.Visible
          SideAngleBtn.Visibility = Windows.Visibility.Visible
-         OrderListBtn.Visibility = If( m_bEnableOrderList, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+         OrderListBtn.Visibility = If(m_bEnableOrderList, Windows.Visibility.Visible, Windows.Visibility.Hidden)
          TopBtn.Visibility = Windows.Visibility.Visible
          PartNumberGrd.Visibility = Windows.Visibility.Visible
       Else
@@ -179,7 +190,7 @@ Public Class ImportPageUC
          ResetBtn.Visibility = Windows.Visibility.Hidden
          SideAngleBtn.Visibility = Windows.Visibility.Hidden
          OrderListBtn.Visibility = Windows.Visibility.Hidden
-         TopBtn.Visibility = Windows.Visibility.Hidden 
+         TopBtn.Visibility = Windows.Visibility.Hidden
          PartNumberGrd.Visibility = Windows.Visibility.Hidden
       End If
       mmBtn.IsEnabled = True
@@ -196,7 +207,8 @@ Public Class ImportPageUC
       PartNumTxBx.Text = "1"
       ' disabilito ok
       OkBtn.IsEnabled = False
-
+      ' Azzero l'idice di parcheggio
+      NewParkInd = 0
    End Sub
 
    Private Sub LoadGridData()
@@ -339,13 +351,18 @@ Public Class ImportPageUC
       ResetBtn.IsEnabled = False
       SideAngleBtn.IsEnabled = False
       FiloTopBtn.IsEnabled = False
-      DripCutBtn.IsEnabled = False
+      ' Evito di settare le proprietà di oggeti che sono con visibilità Hidden
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = False
+      Else
+         EngraveBtn.IsEnabled = False
+      End If
       DripDrillBtn.IsEnabled = False
       Return True
    End Function
 
    Private Function LoadCurrFile() As Boolean
-      ' Pulisco il DB geometrico locale
+      ' Pulisco il DB geometrico locale      
       Dim bOk As Boolean = EgtNewFile()
       ' Costruisco path completa del file
       Dim sPath = IO.Path.Combine(m_sCurrDir, m_sCurrFile)
@@ -357,6 +374,10 @@ Public Class ImportPageUC
          Dim dScale As Double = If(m_bMM, ONEMM, ONEINCH)
          ' Importo file DXF
          bOk = bOk AndAlso EgtImportDxf(sPath, dScale)
+         ' riporto al piano tutte le superifici
+         EgtSelectAll()
+         EgtScale(GDB_ID.SEL, Frame3d.GLOB, 1, 1, 0)
+         EgtDeselectAll()
       ElseIf m_nFileType = FT.NGE Then
          ' Carico Nge
          bOk = bOk AndAlso EgtOpenFile(sPath)
@@ -396,7 +417,11 @@ Public Class ImportPageUC
             OkBtn.IsEnabled = False
             SideAngleBtn.IsEnabled = False
             FiloTopBtn.IsEnabled = False
-            DripCutBtn.IsEnabled = False
+            If DripCutBtn.Visibility = Visibility.Visible Then
+               DripCutBtn.IsEnabled = False
+            Else
+               EngraveBtn.IsEnabled = False
+            End If
             DripDrillBtn.IsEnabled = False
          ElseIf m_nFileType = FT_TRF Or m_nFileType = FT_CUT Then
             ' abilito bottone Insert, disabilito bottoni UseLayer, UseClosedCurve, UseRegion e Reset
@@ -412,10 +437,14 @@ Public Class ImportPageUC
             OkBtn.IsEnabled = True
             SideAngleBtn.IsEnabled = False
             FiloTopBtn.IsEnabled = False
-            DripCutBtn.IsEnabled = False
+            If DripCutBtn.Visibility = Visibility.Visible Then
+               DripCutBtn.IsEnabled = False
+            Else
+               EngraveBtn.IsEnabled = False
+            End If
             DripDrillBtn.IsEnabled = False
          End If
-      ' altrimenti import per cornici
+         ' altrimenti import per cornici
       Else
          mmBtn.IsEnabled = (m_nFileType = FT.DXF)
          inchBtn.IsEnabled = (m_nFileType = FT.DXF)
@@ -425,12 +454,12 @@ Public Class ImportPageUC
    End Function
 
    Private Sub OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles ImportScene.OnMouseDownScene
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
-         OnMouseDownSceneSideAngle( e)
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked Then
+         OnMouseDownSceneSideAngle(e)
       ElseIf DripDrillBtn.IsChecked() Then
-         OnMouseDownSceneUnderDrill( e)
+         OnMouseDownSceneUnderDrill(e)
       ElseIf FiloTopBtn.IsChecked() Then
-         OnMouseDownSceneFiloTop( e)
+         OnMouseDownSceneFiloTop(e)
       End If
    End Sub
 
@@ -560,31 +589,35 @@ Public Class ImportPageUC
                   EgtDeselectObj(nId)
                   EgtDeselectObj(nLayId)
                   Dim sLayName As String = ""
-                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-                     EgtRemoveInfo( nLayId, INFO_FILOTOP)
-                     EgtRemoveInfo( nLayId, INFO_OFFSET)
-                     EgtRemoveInfo( nLayId, INFO_DEPTH)
-                     Dim nEntId As Integer = EgtGetFirstInGroup( nLayId)
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+                     EgtRemoveInfo(nLayId, INFO_FILOTOP)
+                     EgtRemoveInfo(nLayId, INFO_OFFSET)
+                     EgtRemoveInfo(nLayId, INFO_DEPTH)
+                     Dim nEntId As Integer = EgtGetFirstInGroup(nLayId)
                      While nEntId <> GDB_ID.NULL
                         EgtSetColor(nEntId, New Color3d(127, 63, 0))
-                        nEntId = EgtGetNext( nEntId)
+                        nEntId = EgtGetNext(nEntId)
                      End While
+                     m_DeselectListHole.Add(nLayId)
+                     m_SelListHole.Remove(nLayId)
                   End If
                Else
                   Dim nLayId As Integer = GDB_ID.NULL
                   EgtGetInfo(nId, "ID", nLayId)
                   Dim sLayName As String = ""
-                  If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
-                     EgtSelectObj( nId)
-                     EgtSelectObj( nLayId)
-                     EgtSetInfo( nLayId, INFO_FILOTOP, 1)
-                     EgtSetInfo( nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
-                     EgtSetInfo( nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
-                     Dim nEntId As Integer = EgtGetFirstInGroup( nLayId)
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
+                     EgtSelectObj(nId)
+                     EgtSelectObj(nLayId)
+                     EgtSetInfo(nLayId, INFO_FILOTOP, 1)
+                     EgtSetInfo(nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
+                     EgtSetInfo(nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
+                     Dim nEntId As Integer = EgtGetFirstInGroup(nLayId)
                      While nEntId <> GDB_ID.NULL
                         EgtSetColor(nEntId, New Color3d(255, 255, 255))
-                        nEntId = EgtGetNext( nEntId)
+                        nEntId = EgtGetNext(nEntId)
                      End While
+                     m_SelListHole.Add(nLayId)
+                     m_DeselectListHole.Remove(nLayId)
                   End If
                End If
                EgtDraw()
@@ -592,6 +625,12 @@ Public Class ImportPageUC
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      m_FiloTopUC.CreateFiloTopPreView(m_SelListHole)
+      m_FiloTopUC.EraseFiloTopPreview(m_DeselectListHole)
+      If m_SelListHole.Count > 0 Then
+         MessageTxBx.Text = ""
+         MessageBrd.Background = Brushes.Transparent
+      End If
    End Sub
 
    Private Sub OnShowDistanceVector(sender As Object, vtDist As Vector3d) Handles ImportScene.OnShowDistanceVector
@@ -601,7 +640,7 @@ Public Class ImportPageUC
 
    Private Sub SelectedPartChanged()
       ' Se sono in modalità inclinazioni o gocciolatoio calcolo lati inclinabili e creo testi
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked() Then
          m_SideAngleUC.ReLoadSideAnglePage()
       End If
    End Sub
@@ -624,7 +663,7 @@ Public Class ImportPageUC
             ' Ciclo sulle regioni
             Dim EntId As Integer = EgtGetFirstInGroup(RegionId)
             While EntId <> GDB_ID.NULL
-               If EgtGetType( EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
+               If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
                EntId = EgtGetNext(EntId)
             End While
             RegionId = EgtGetNextName(PartId, NAME_REGION)
@@ -662,8 +701,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -694,8 +737,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -726,8 +773,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -808,20 +859,38 @@ Public Class ImportPageUC
    End Sub
 
    Private Sub OrderListBtn_Click(sender As Object, e As RoutedEventArgs) Handles OrderListBtn.Click
-      Dim DlgOrderList As New CompoCsvData( m_MainWindow)
-      DlgOrderList.SetData( m_sOrder, m_sList)
+      Dim DlgOrderList As New CompoCsvData(m_MainWindow)
+      DlgOrderList.SetData(m_sOrder, m_sList)
       If DlgOrderList.ShowDialog() Then
-         DlgOrderList.GetData( m_sOrder, m_sList)
+         DlgOrderList.GetData(m_sOrder, m_sList)
       End If
    End Sub
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
+      ' Genero l'immagine solo se è abilitata la modalità
+      If GetPrivateProfileInt(S_GENERAL, K_ENABLEDXFPARK, 0, m_MainWindow.GetIniFile) <> 0 Then Print()
       ' Se import per pezzi piatti
       If m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut Then
          ' Eseguo importazione pezzi piatti
          LoadFlatParts()
-      ' altrimenti import per cornici
+
+         ' Aggiorno la gestione dei parcheggi: spengo tutti i parcheggi tranne quello indicato
+         Dim ListParkInd As New List(Of ParkInd)
+         SelParkIndWD.LoadParkInd(ListParkInd)
+         For Each ItemParkInd As ParkInd In ListParkInd
+            If ItemParkInd.Ind = NewParkInd Then
+               ItemParkInd.Status = GDB_ST.ON_
+            Else
+               ItemParkInd.Status = GDB_ST.OFF
+            End If
+         Next
+         ' Aggiorno lo stato dei pezzi 
+         For Each Item As ParkInd In ListParkInd
+            SelParkIndWD.SetStatusPartInParkInd(Item, False)
+         Next
+
+         ' altrimenti import per cornici
       Else
          LoadFrame()
       End If
@@ -831,6 +900,80 @@ Public Class ImportPageUC
       m_MainWindow.m_ActivePage = m_MainWindow.m_PrevActivePage
    End Sub
 
+   ' Creo una immagine del progetto da importare salvato nel percorso di progetto "..\(#ProjInd)_ParkInd_(#ParkInd).png"
+   Public Sub Print()
+      ' recupero la lista degli indici di parcheggio
+      NewParkInd = SelParkIndWD.NewParkInd()
+
+      Dim SM_Select As SM = SM.SHADING
+      ' SM_Select = SM.HIDDENLINE
+      ' SM_Select = SM.WIREFRAME
+      Dim nProj As Integer = m_MainWindow.m_CurrentProjectPageUC.GetCurrentProject()
+      Dim sPath As String = SelParkIndWD.GetPathCurrProj() & NewParkInd.ToString & ".png"
+      ' Recupero le dimensioni dell'area di stampa
+      Dim dW As Integer = 120
+      Dim dH As Integer = 120
+
+      If Not MainWindow.m_bShowSVGParkInd Then
+         Try
+            ' Prendo l'immagine corrente per la stampa
+            Dim colBackTopColor As Color3d = GetBackTopColor()
+            Dim colBackBottomColor As Color3d = GetBackBottomColor()
+            ' Recupero le dimensioni correnti della pagina di disegno
+            Dim nImgW As Integer = m_MainWindow.m_CurrentProjectPageUC.ActualWidth()
+            Dim nImgH As Integer = m_MainWindow.m_CurrentProjectPageUC.ActualHeight()
+            If Not EgtGetImage(SM_Select, colBackTopColor, colBackBottomColor, nImgW, nImgH, sPath) Then
+               ' Error in creating the print image
+               EgtOutLog(EgtMsg(50181))
+               EgtSetLineAttribs(1)
+               Return
+            End If
+            EgtSetLineAttribs(1)
+            'Metodo complesso di stampa che permette di rilasciare il file :
+            'carico la bitmap e la metto in uno stream in memoria
+            Dim stream As System.IO.Stream = New System.IO.MemoryStream()
+            Dim bitmap As System.Drawing.Bitmap = New System.Drawing.Bitmap(sPath)
+            bitmap.Save(stream, System.Drawing.Imaging.ImageFormat.Png)
+            bitmap.Dispose()
+            ' la sposto in una BitmapImage
+            Dim bitImage As New System.Windows.Media.Imaging.BitmapImage()
+            bitImage.BeginInit()
+            bitImage.StreamSource = stream
+            bitImage.EndInit()
+            ' la sposto in un Visual Control
+            Dim tmpImg As New Image
+            tmpImg.BeginInit()
+            tmpImg.Source = bitImage
+            tmpImg.Stretch = Stretch.Uniform
+            tmpImg.EndInit()
+            ' eseguo la stampa
+         Catch
+            ' Rrror in executing print
+            EgtOutLog(EgtMsg(50182))
+         End Try
+      Else
+         ' Assegno dei nomi ai pezzi (Da controllare bene se funzione sempre)...riassegno i nomi dopo?
+         Dim nIdPart As Integer = EgtGetFirstPart()
+         Dim nIndex As Integer = 0
+         While nIdPart <> GDB_ID.NULL
+            ' recupero il primo layer del part 
+            Dim nIdLay As Integer = EgtGetFirstLayer(nIdPart)
+            While nIdLay <> GDB_ID.NULL
+               Dim nIdEnt As Integer = EgtGetFirstInGroup(nIdLay)
+               While nIdEnt <> GDB_ID.NULL
+                  EgtSetName(nIdEnt, nIndex.ToString)
+                  nIdEnt = EgtGetNext(nIdEnt)
+                  nIndex = nIndex + 1
+               End While
+               nIdLay = EgtGetNextLayer(nIdLay)
+            End While
+            nIdPart = EgtGetNextPart(nIdPart)
+         End While
+         EgtExportSvg(GDB_ID.ROOT, SelParkIndWD.GetPathCurrProj() & NewParkInd.ToString & ".svg")
+      End If
+
+   End Sub
+
    Private Sub LoadFlatParts()
       ' Cancello regioni di selezione dai pezzi
       Dim PartId As Integer = EgtGetFirstPart()
@@ -903,21 +1046,37 @@ Public Class ImportPageUC
       If My.Computer.FileSystem.FileExists(sTmpFile) Then
          My.Computer.FileSystem.DeleteFile(sTmpFile)
       End If
+
       ' Calcolo l'area dei pezzi inseriti
       Dim dNewArea As Double = 0
       Dim nId As Integer = nFirstId
       While nId <> GDB_ID.NULL
+         ' Definisco l'indice di parcheggio asssganto al pezzo
+         If GetPrivateProfileInt(S_GENERAL, K_ENABLEDXFPARK, 0, m_MainWindow.GetIniFile) <> 0 Then
+            EgtSetInfo(nId, INFO_PARKIND, NewParkInd.ToString)
+            ' Imposto lo stato
+            EgtSetStatus(nId, GDB_ST.ON_)
+            ' Salvo lo stato (per gestire la navigazione)
+            EgtSetInfo(nId, INFO_PARKSTATUS, GDB_ST.ON_)
+         End If
          dNewArea += GeomCalc.GetPartArea(nId)
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
       ' Nascondo tutti i pezzi inseriti (per evitare interferenze con pezzi in fase di parcheggio)
       nId = nFirstId
+      Dim GlobBBox As New BBox3d
       While nId <> GDB_ID.NULL
+         Dim bboxTemp As New BBox3d
+         EgtGetBBox(nId, 0, bboxTemp)
+         GlobBBox.Add(bboxTemp)
          EgtSetStatus(nId, GDB_ST.OFF)
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
+      Dim DimX As Double = GlobBBox.DimX
+      Dim DimY As Double = GlobBBox.DimY
+      Dim BBoxMaxPt As Point3d = GlobBBox.Max
 
       ' Ciclo sui pezzi inseriti
       nId = nFirstId
@@ -954,7 +1113,12 @@ Public Class ImportPageUC
          ' Imposto path di provenienza
          EgtSetInfo(nId, INFO_SOU_PATH, IO.Path.Combine(m_sCurrDir, m_sCurrFile))
          ' Inserisco in parcheggio
-         m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId, True)
+         If GetPrivateProfileInt(S_GENERAL, K_ENABLEDXFPARK, 0, m_MainWindow.GetIniFile) <> 0 Then
+            ' Mantengo la posizione relativa tra i pezzi
+            m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePartDXF(nId, DimX, DimY, BBoxMaxPt)
+         Else
+            m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId, True)
+         End If
          ' Recupero Id di pezzo successivo
          Dim nNextId As Integer = EgtGetNextPart(nId)
          ' Se richiesto posizionamento diretto, lo eseguo
@@ -1011,22 +1175,24 @@ Public Class ImportPageUC
       ' Salvo direttorio corrente
       WritePrivateProfileString(S_FLATPARTS, K_FLPCURRDIR, m_sCurrDir, m_MainWindow.GetIniFile())
       ' Tolgo pagina inclinazioni/gocciolatoi se attiva
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_SideAngleUC)
          If SideAngleBtn.IsChecked() Then
             SideAngleBtn.IsChecked = False
+         ElseIf EngraveBtn.IsChecked() Then
+            EngraveBtn.IsChecked = False
          Else
             DripCutBtn.IsChecked() = False
          End If
-      ' Tolgo pagina fori da sotto se attiva
+         ' Tolgo pagina fori da sotto se attiva
       ElseIf DripDrillBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_UnderDrillUC)
          DripDrillBtn.IsChecked() = False
-      ' Tolgo pagina Filo Top se attiva
+         ' Tolgo pagina Filo Top se attiva
       ElseIf FiloTopBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
@@ -1040,6 +1206,7 @@ Public Class ImportPageUC
 
    Private Sub SideAngleBtn_Click(sender As Object, e As RoutedEventArgs) Handles SideAngleBtn.Click
       If SideAngleBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni per percorsi interni
          AdjustSelectRegions()
          ' Dichiaro nessuna selezione
@@ -1052,7 +1219,11 @@ Public Class ImportPageUC
          FileListBox.Visibility = Windows.Visibility.Hidden
          ' Disabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
          FiloTopBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1062,6 +1233,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1073,8 +1245,72 @@ Public Class ImportPageUC
          EgtDeselectAll()
          ' Riabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
+         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
+         mmBtn.IsEnabled = True
+         inchBtn.IsEnabled = True
+         ' Elimino scritte angoli per input e inserisco quelle definitive
+         SideAngle.WriteSideAngleForNest(ImportScene.GetCtx())
+         ' Riabilito bottone reset
+         ResetBtn.IsEnabled = True
+         ' Pulisco area messaggi
+         MessageTxBx.Text = ""
+         MessageBrd.Background = Brushes.Transparent
+      End If
+      EgtZoom(ZM.ALL)
+   End Sub
+
+   Private Sub EngraveBtn_Click(sender As Object, e As RoutedEventArgs) Handles EngraveBtn.Click
+      If EngraveBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
+         ' Aggiungo regioni per percorsi interni
+         AdjustSelectRegions()
+         ' Dichiaro nessuna selezione
+         m_nSelectedPart = GDB_ID.NULL
+         m_nSelectedLayer = GDB_ID.NULL
+         ' Imposto modalità sideangle
+         m_SideAngleUC.m_Mode = SideAngleUC.ModeOpt.ENGRAVE
+         LeftGrid.Children.Add(m_SideAngleUC)
+         FilePathTxBl.Visibility = Windows.Visibility.Hidden
+         FileListBox.Visibility = Windows.Visibility.Hidden
+         ' Disabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
+         SideAngleBtn.IsEnabled = False
+         FiloTopBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         End If
+         DripDrillBtn.IsEnabled = False
+         mmBtn.IsEnabled = False
+         inchBtn.IsEnabled = False
+         ' Disabilito bottone reset
+         ResetBtn.IsEnabled = False
+         ' Messaggio di selezione da effettuare
+         MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+         MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
+      Else
+         FinderGrd.Visibility = Visibility.Visible
+         ' Rimuovo regioni per percorsi interni
+         RemoveSelectRegions()
+         FilePathTxBl.Visibility = Windows.Visibility.Visible
+         FileListBox.Visibility = Windows.Visibility.Visible
+         LeftGrid.Children.Remove(m_SideAngleUC)
+         ' Deseleziono eventuali pezzi rimasti selezionati
+         m_nSelectedPart = GDB_ID.NULL
+         m_nSelectedLayer = GDB_ID.NULL
+         EgtDeselectAll()
+         ' Riabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
+         FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
+         SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         End If
          DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                   Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
          mmBtn.IsEnabled = True
@@ -1092,6 +1328,7 @@ Public Class ImportPageUC
 
    Private Sub DripCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles DripCutBtn.Click
       If DripCutBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Dichiaro nessuna selezione
          m_nSelectedPart = GDB_ID.NULL
          m_nSelectedLayer = GDB_ID.NULL
@@ -1103,6 +1340,9 @@ Public Class ImportPageUC
          ' Disabilito SideAngleBtn,FiloTop,  DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = False
          FiloTopBtn.IsEnabled = False
+         If DripCutBtn.Visibility <> Visibility.Visible Then
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1112,6 +1352,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_SideAngleUC)
@@ -1122,8 +1363,9 @@ Public Class ImportPageUC
          ' Riabilito SideAngleBtn, FiloTop, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
-                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
+         If DripCutBtn.Visibility <> Visibility.Visible Then
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          mmBtn.IsEnabled = True
          inchBtn.IsEnabled = True
          ' Elimino scritte angoli per input e inserisco quelle definitive
@@ -1142,6 +1384,7 @@ Public Class ImportPageUC
 
    Private Sub DripDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles DripDrillBtn.Click
       If DripDrillBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni di selezione per percorsi interni
          AdjustSelectRegions()
          ' Imposto modalità fori da sotto
@@ -1151,7 +1394,11 @@ Public Class ImportPageUC
          ' Disabilito SideAngleBtn, FiloTop, DripCutBtn e unità di misura
          SideAngleBtn.IsEnabled = False
          FiloTopBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
          ' Disabilito bottone reset
@@ -1160,6 +1407,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 15)   ' Selezionare uno o più fori
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1172,8 +1420,12 @@ Public Class ImportPageUC
          ' Riabilito SideAngleBtn, FiloTop, DripCutBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          mmBtn.IsEnabled = True
          inchBtn.IsEnabled = True
          ' Riabilito bottone reset
@@ -1187,6 +1439,7 @@ Public Class ImportPageUC
 
    Private Sub FiloTopBtn_Click(sender As Object, e As RoutedEventArgs) Handles FiloTopBtn.Click
       If FiloTopBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni per percorsi interni
          AdjustSelectRegions()
          ' Dichiaro nessuna selezione
@@ -1198,7 +1451,11 @@ Public Class ImportPageUC
          FileListBox.Visibility = Windows.Visibility.Hidden
          ' Disabilito SideAngleBtn, DripCutBtn, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1208,6 +1465,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno interno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1219,8 +1477,12 @@ Public Class ImportPageUC
          EgtDeselectAll()
          ' Riabilito SideAngleBtn, DripCutBtn, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                   Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
          mmBtn.IsEnabled = True
@@ -1279,8 +1541,9 @@ Public Class ImportPageUC
                If nType = GDB_TY.CRV_LINE Or nType = GDB_TY.CRV_ARC Or nType = GDB_TY.CRV_COMPO Then
                   vCrvId.Add(nCrvId)
                End If
-            ElseIf DripDrillBtn.IsChecked
-               if nType = GDB_TY.CRV_ARC
+            ElseIf DripDrillBtn.IsChecked Then
+
+               If nType = GDB_TY.CRV_ARC Then
                   vCrvId.Add(nCrvId)
                End If
             End If
@@ -1306,11 +1569,11 @@ Public Class ImportPageUC
 
    Private Sub Cad2dBtn_Click(sender As Object, e As RoutedEventArgs) Handles Cad2dBtn.Click
 
-      Dim ProcsCad2d As Process() = Process.GetProcessesByName( m_sCad2dName)
+      Dim ProcsCad2d As Process() = Process.GetProcessesByName(m_sCad2dName)
       If ProcsCad2d.Length() > 0 Then
-         ShowWindow( ProcsCad2d(0).MainWindowHandle, 3)
+         ShowWindow(ProcsCad2d(0).MainWindowHandle, 3)
       Else
-         Process.Start( m_sCad2dPath)
+         Process.Start(m_sCad2dPath)
       End If
 
    End Sub
@@ -1319,42 +1582,42 @@ End Class
 
 Public Class IconListBoxItem
 
-    Private m_iPictureID As Integer
-    Private m_sName As String
+   Private m_iPictureID As Integer
+   Private m_sName As String
 
-    Public Property PictureID() As Integer
-        Get
-            Return m_iPictureID
-        End Get
-        Set(value As Integer)
-            m_iPictureID = value
-        End Set
-    End Property
+   Public Property PictureID() As Integer
+      Get
+         Return m_iPictureID
+      End Get
+      Set(value As Integer)
+         m_iPictureID = value
+      End Set
+   End Property
 
-    Public Property Name() As String
-        Get
-            Return m_sName
-        End Get
-        Set(value As String)
-            m_sName = value
-        End Set
-    End Property
+   Public Property Name() As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+      End Set
+   End Property
 
-    Public ReadOnly Property PictureString() As String
-        Get
-            Return "/Resources/ImportPageListBoxImages/" + PictureID.ToString() + ".png"
-        End Get
-    End Property
+   Public ReadOnly Property PictureString() As String
+      Get
+         Return "/Resources/ImportPageListBoxImages/" + PictureID.ToString() + ".png"
+      End Get
+   End Property
 
-    Sub New()
-        Me.Name = String.Empty
-        Me.PictureID = 0
-    End Sub
+   Sub New()
+      Me.Name = String.Empty
+      Me.PictureID = 0
+   End Sub
 
-    Sub New(Name As String, PictureID As Integer)
-        Me.Name = Name
-        Me.PictureID = PictureID
-    End Sub
+   Sub New(Name As String, PictureID As Integer)
+      Me.Name = Name
+      Me.PictureID = PictureID
+   End Sub
 
 
 End Class

DrawImport/MainComponentPageUC.xaml.vb

@@ -33,14 +33,31 @@ Public Class MainComponentPageUC
       m_bIsFirstPage = True
       LoadPage()
       CurrentBtn = Nothing
-      Compo9.SetValue(Grid.ColumnProperty, 0)
-      Compo9.SetValue(Grid.ColumnSpanProperty, 2)
-      ImageCompo9.Visibility = Windows.Visibility.Hidden
-      LabelCompo9.Visibility = Windows.Visibility.Visible
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         ' se il numero delle componenti è superiore a 8 allora inserisco la seconda pagina
+         If GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile()) > 8 Then
+            OthersBackGr.Visibility = Visibility.Visible
+            Compo9.SetValue(Grid.ColumnProperty, 0)
+            Compo9.SetValue(Grid.ColumnSpanProperty, 2)
+            ImageCompo9.Visibility = Windows.Visibility.Hidden
+            LabelCompo9.Visibility = Windows.Visibility.Visible
+         Else
+            OthersBackGr.Visibility = Visibility.Hidden
+         End If
+      Else
+         OthersBackGr.Visibility = Visibility.Visible
+         Compo9.SetValue(Grid.ColumnProperty, 0)
+         Compo9.SetValue(Grid.ColumnSpanProperty, 2)
+         ImageCompo9.Visibility = Windows.Visibility.Hidden
+         LabelCompo9.Visibility = Windows.Visibility.Visible
+      End If
+
+
       m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.m_bBackFromInternalCompo = False
    End Sub
 
    Private Function GetButton(ByVal nInd As Integer) As Button
@@ -167,7 +184,7 @@ Public Class MainComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = DirectCast(e.Source, Button)
-      Dim CompoName As String = S_COMPO & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = If(m_MainWindow.FrameCutBtn.IsChecked, S_FRAMECOMPO, S_COMPO) & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       m_SecondaryComponentPage.m_sCurrCompo = String.Empty
       Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
@@ -251,13 +268,18 @@ Public Class MainComponentPageUC
    End Sub
 
    Private Sub LoadPage()
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         LoadFramePage()
+         Return
+      End If
+
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
       Dim nCompoNumber As Integer = GetPrivateProfileInt(S_COMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)
-      nDeltaSecondPage = 0
+         nDeltaSecondPage = 0
       Else
          ClearButton(nCompoNumber)
          nDeltaSecondPage = 8
@@ -325,16 +347,86 @@ Public Class MainComponentPageUC
 
    End Sub
 
+   Private Sub LoadFramePage()
+      Dim nDeltaSecondPage As Integer = 8
+      ' Leggo numero di componenti presenti
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
+      ' Calcolo indici a seconda della pagina in cui sono
+      If m_bIsFirstPage Then
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 0
+      Else
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 8
+      End If
+
+      ' Creazione converter da String a ImageSource
+      Dim ImageConverter As New ImageSourceConverter
+      Dim ThicknessConverter As New ThicknessConverter
+
+      'Assegnazione immagine e testo ai Button
+      For index As Integer = 1 To 8
+         Dim CustomThickness As New Thickness(0)
+         Dim nCompoName As Integer = GetPrivateProfileInt(S_FRAMECOMPO & index + nDeltaSecondPage, "Name", 0, m_MainWindow.GetIniFile())
+         Dim sCompoImage As String = ""
+         Dim sCompoImageSource As ImageSource
+
+         'verifico presenza immagine e la aggiungo
+         If GetPrivateProfileString(S_FRAMECOMPO & index + nDeltaSecondPage, "Image", "", sCompoImage, m_MainWindow.GetIniFile()) <> 0 Then
+            Try
+               sCompoImageSource = ImageConverter.ConvertFromString(m_MainWindow.GetResourcesDir() & "\" & sCompoImage)
+               GetImage(index).Height = 65
+               GetImage(index).Width = 65
+               GetImage(index).Source = sCompoImageSource
+            Catch ex As Exception
+               EgtOutLog("Error loading image " & sCompoImage)
+               sCompoImage = String.Empty
+               GetImage(index).Height = 0
+               GetImage(index).Width = 0
+               CustomThickness.Right = 0
+               GetImage(index).Margin = CustomThickness
+            End Try
+         Else
+            'Se non c'è l'immagine azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+         'verifico presenza testo
+         If nCompoName > 0 Then
+            Dim sCompoName As String = EgtMsg(MSG_COMPONENTPAGEUC + nCompoName)
+            'verifico presenza immagine
+            If sCompoImage.Length > 0 Then
+               'se la lunghezza del testo è maggiore di 15 lo taglio
+               If sCompoName.Length > 15 Then
+                  sCompoName = sCompoName.Substring(0, 15)
+               End If
+               GetLabel(index).Text = sCompoName
+               'Se ci sono sia testo che immagine imposto un margine di 10
+               CustomThickness.Right = 10
+               GetImage(index).Margin = CustomThickness
+            Else
+               'se l'immagine non c'è e il testo è maggiore di 20 lo taglio
+               If sCompoName.Length > 20 Then
+                  sCompoName = sCompoName.Substring(0, 20)
+               End If
+               GetLabel(index).Text = sCompoName
+            End If
+         Else
+            'Se non c'è testo azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+      Next
+
+   End Sub
+
    ' Gestione bottone altri componenti
    Private Sub Compo9_Click(sender As Object, e As RoutedEventArgs) Handles Compo9.Click
       If m_bIsFirstPage Then
          m_bIsFirstPage = False
          LoadPage()
-         'Compo9.SetValue(Grid.ColumnProperty, 1)
-         'Compo9.SetValue(Grid.ColumnSpanProperty, 1)
-         'ImageCompo9.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NumericKeyboardArrow.png", UriKind.Relative))
-         'ImageCompo9.Visibility = Windows.Visibility.Visible
-         'LabelCompo9.Visibility = Windows.Visibility.Hidden
          Compo9.SetValue(Grid.ColumnProperty, 0)
          Compo9.SetValue(Grid.ColumnSpanProperty, 2)
          ImageCompo9.Visibility = Windows.Visibility.Hidden

DrawImport/SideAngle.vb

@@ -226,6 +226,10 @@ Module SideAngle
                         EgtSetInfo(EntId, INFO_SIDE_ANGLE, dAng)
                         EgtSetInfo(EntId, INFO_ORIG_SIDE_ANGLE, dAng)
                         EgtSetInfo(EntId, INFO_HEEL, dHeel)
+                        Dim sSawingTilted As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
+                        If Not String.IsNullOrEmpty(sSawingTilted) Then
+                           EgtSetInfo(EntId, DEF_MACHINING, sSawingTilted)
+                        End If
                      End If
                   End If
                End If

DrawImport/SideAngleUc.xaml.vb

@@ -1303,10 +1303,15 @@ Public Class SideAngleUC
       If dSideAngle <> 0 Then
          EgtSetInfo(CurrEntity.nGeomId, INFO_SIDE_ANGLE, dSideAngle)
          EgtSetInfo(CurrEntity.nGeomId, INFO_ORIG_SIDE_ANGLE, dSideAngle)
-      ' Cancello inclinazione nell'apposito campo info
+         Dim sSawingTilted As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
+         If Not String.IsNullOrEmpty(sSawingTilted) Then
+            EgtSetInfo(CurrEntity.nGeomId, DEF_MACHINING, sSawingTilted)
+         End If
+         ' Cancello inclinazione nell'apposito campo info
       Else
          EgtRemoveInfo(CurrEntity.nGeomId, INFO_SIDE_ANGLE)
          EgtRemoveInfo(CurrEntity.nGeomId, INFO_ORIG_SIDE_ANGLE)
+         EgtRemoveInfo(CurrEntity.nGeomId, DEF_MACHINING)
       End If
       ' Aggiorno lista entità con nuova inclinazione
       CurrEntity.dSideAngle = dSideAngle

Frames/FrameCutPageUC.xaml

@@ -7,124 +7,155 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
 
-   <!-- Definizione della FrameCutPage -->
-   <Grid Name="FrameCutPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
-      
-      <!-- Definizione della Grid superiore -->
-      <Grid Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
-         </Grid.ColumnDefinitions>
-         
-         <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
-            <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </ToggleButton>
-
-      </Grid>
-
-      <Grid Name="LeftGrid" Grid.Row="1">
-         <Grid.RowDefinitions>
+    <!-- Definizione della FrameCutPage -->
+    <Grid Name="FrameCutPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
             <RowDefinition Height="1*"/>
-            <RowDefinition Height="7*"/>
-         </Grid.RowDefinitions>
-      
-      <Grid Grid.Row="1">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="0.6*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="2.5*"/>
-         </Grid.RowDefinitions>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
-               Width="200" MaxDropDownHeight="300">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+        <!-- Definizione della Grid superiore -->
+        <Grid Grid.Column="1" Grid.Row="0" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+            </Grid.ColumnDefinitions>
 
-         <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="SelSectionBtn" 
-                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+            <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="CompoBtn" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="SelSectionBtn" Grid.Column="3" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                 <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
-             
-            <Grid>
-               <Button Name="SelGuideBtn" 
-                       Style="{DynamicResource OmagCut_YellowTextButton}"/>
-               <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-                  <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
-                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-                  <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
-                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
-                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               </UniformGrid>
-            </Grid>  
-         </UniformGrid>
 
-         <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+            <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
+                <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
+        </Grid>
+
+        <Grid Name="LeftGrid" Grid.Row="1">
+            <Grid.RowDefinitions>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="7*"/>
+            </Grid.RowDefinitions>
+
+            <Grid Grid.Row="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.6*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="1.7*"/>
+                </Grid.RowDefinitions>
+
+                <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
+               Width="200" MaxDropDownHeight="300">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                    <!--<Button Name="SelSectionBtn" 
+                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                        <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>-->
+
+                    <Grid>
+                        <Button Name="SelGuideBtn" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                        <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                            <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                            <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                            <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                        </UniformGrid>
+                    </Grid>
+                </UniformGrid>
+
+                <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
-            Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
-            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
+               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
+               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="MirrorPartBtn" 
+                <Grid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1.5*"/>
+                        <ColumnDefinition Width="0.5*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <TextBlock Name="OffsXInteryTxBl" Grid.Column="0"
+                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                    <CheckBox Name="UseInteraxisChBx" Grid.Row="7" Grid.Column="1" Height="30" Width="40" HorizontalAlignment="Right"
+                      Margin="-20,0,0,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffsXInteryTxBx" Grid.Column="2" Width="50"
+                      Style="{DynamicResource OmagCut_CalculatorTextBox}" IsEnabled="{Binding ElementName=UseInteraxisChBx, Path=IsChecked}"/>
+                </Grid>
+
+                <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="MirrorPartBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource SpecchiaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-            </Button>
-            <Button Name="RemovePartBtn" 
+                    </Button>
+                    <Button Name="RemovePartBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource Rimuovi_eliminaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </UniformGrid>
+                    </Button>
+                </UniformGrid>
 
-         <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
+                <!--<UniformGrid Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="CompoBtn" 
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                        <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                </UniformGrid>-->
+
+                <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
             Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
 
          <ComboBox Name="SawRoughingCmBx" Grid.Row="5" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}"
@@ -182,10 +213,10 @@
             </ComboBox.ItemTemplate>
          </ComboBox>-->
 
-      </Grid>
-         
-      </Grid>
+            </Grid>
 
-   </Grid>
+        </Grid>
+
+    </Grid>
 
 </UserControl>

Frames/FrameCutPageUC.xaml.vb

@@ -52,6 +52,10 @@ Public Class FrameCutPageUC
       OffsXyTxBx.Text = LenToString(dOffsXY, 3)
       Dim dOffsYY As Double = GetPrivateProfileDouble(S_FRAME, K_OFFSYY, 5, m_MainWindow.GetIniFile())
       OffsYyTxBx.Text = LenToString(dOffsYY, 3)
+      Dim dOffsXInterY As Double = GetPrivateProfileDouble(S_FRAME, K_OFFSXINTERY, 5, m_MainWindow.GetIniFile())
+      OffsXInteryTxBx.Text = LenToString(dOffsXInterY, 3)
+      Dim bOffsYInterYSawTh As Boolean = False
+      UseInteraxisChBx.IsChecked = (GetPrivateProfileInt(S_FRAME, K_OFFSXINTERYSAWTH, 0, m_MainWindow.GetIniFile()) <> 1)
 
       ' Imposto i messaggi letti dal file dei messaggi
       m_AlongAx.Add(EgtMsg(MSG_FRAMECUTPAGEUC + 1))            'Lungo X
@@ -70,6 +74,18 @@ Public Class FrameCutPageUC
       OffsZTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 8)           'Distanza sopra
       OffsXyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 9)          'Distanza inizio
       OffsYyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 22)         'Distanza Y
+      OffsXInteryTxBl.Text = EgtMsg(90645)                      'Interasse
+      Dim sChBxToolTip As String = EgtMsg(90646)                  'Applica valore indicato\n altrienti spessore lama
+      sChBxToolTip = sChBxToolTip.Replace("/n", "£")
+      Dim sItems As String() = sChBxToolTip.Split("£")
+      For Index As Integer = 0 To sItems.Count - 1
+         If Index = 0 Then
+            sChBxToolTip = sItems(Index).Trim
+         Else
+            sChBxToolTip &= vbCrLf & sItems(Index).Trim
+         End If
+      Next
+      UseInteraxisChBx.ToolTip = sChBxToolTip
    End Sub
 
    Private Sub FrameCutPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -81,6 +97,12 @@ Public Class FrameCutPageUC
       m_ProjectMgr.CSVBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.VeinMatchingBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.RegisterBtn.Visibility = Windows.Visibility.Hidden
+      ' Visualizzo il bottone per l'importazione dei compo frame
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.COMPOFRAME) AndAlso GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile()) > 0 Then
+         CompoBtn.Visibility = Visibility.Visible
+      Else
+         CompoBtn.Visibility = Visibility.Hidden
+      End If
       ' Recupero dimensioni e kerf del grezzo
       m_nRawId = EgtGetFirstRawPart()
       GetRawBox(m_RawBox)
@@ -271,7 +293,7 @@ Public Class FrameCutPageUC
       End If
    End Sub
 
-   Private Sub OffsXXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsZTxBx.EgtClosed, OffsXyTxBx.EgtClosed, OffsYyTxBx.EgtClosed
+   Private Sub OffsXXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsZTxBx.EgtClosed, OffsXyTxBx.EgtClosed, OffsYyTxBx.EgtClosed, OffsXInteryTxBx.EgtClosed, UseInteraxisChBx.Click
       ' Forzo aggiornamento grezzo nella pagina di Nesting
       m_MainWindow.m_CadCutPageUC.m_NestPage.CalcRawPart()
       ' Parcheggio pezzi presenti nel grezzo
@@ -296,9 +318,18 @@ Public Class FrameCutPageUC
          WritePrivateProfileString(S_FRAME, K_OFFSXY, DoubleToString(dOffsXy, 3), m_MainWindow.GetIniFile())
       End If
       Dim dOffsYy As Double = 0
-      If StringToLen(OffsYyTxBx.Text, dOffsYY) Then
+      If StringToLen(OffsYyTxBx.Text, dOffsYy) Then
          WritePrivateProfileString(S_FRAME, K_OFFSYY, DoubleToString(dOffsYy, 3), m_MainWindow.GetIniFile())
       End If
+      Dim dOffsXIntery As Double = 0
+      If StringToLen(OffsXInteryTxBx.Text, dOffsXIntery) Then
+         WritePrivateProfileString(S_FRAME, K_OFFSXINTERY, DoubleToString(dOffsXIntery, 3), m_MainWindow.GetIniFile())
+      End If
+      Dim sUseInteraxis As String = "1"
+      If UseInteraxisChBx.IsChecked Then
+         sUseInteraxis = "0"
+      End If
+      WritePrivateProfileString(S_FRAME, K_OFFSXINTERYSAWTH, sUseInteraxis, m_MainWindow.GetIniFile())
    End Sub
 
    Private Sub MirrorPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles MirrorPartBtn.Click
@@ -436,6 +467,16 @@ Public Class FrameCutPageUC
       End If
    End Sub
 
+   Private Sub CompoBtn_Click(sender As Object, e As RoutedEventArgs) Handles CompoBtn.Click
+      m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
+      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
+      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
+   End Sub
+
    Friend Function CreateFrame(nPartId As Integer) As Boolean
       If Not MyCreateFrame( nPartId) Then
          EgtErase( nPartId)
@@ -936,12 +977,29 @@ Public Class FrameCutPageUC
       ' Determino distanza da spessore lama
       Dim dMinDist As Double = 0
       Dim dSawThick As Double = 0
+      Dim dOffsXIntery As Double = 0
+      StringToLen(OffsXInteryTxBx.Text, dOffsXIntery)
       If EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw) AndAlso
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dSawThick) Then
-         dMinDist = dSawThick + 5 * EPS_SMALL
+         If UseInteraxisChBx.IsChecked Then
+            If dOffsXIntery < 0 Then
+               dMinDist = 5 * EPS_SMALL
+               OffsXInteryTxBx.Text = "0"
+            Else
+               dMinDist = dOffsXIntery + 5 * EPS_SMALL
+            End If
+         Else
+            dMinDist = dSawThick + 5 * EPS_SMALL
+         End If
+         'If dOffsXIntery <= dSawThick Then
+         '   dMinDist = dSawThick + 5 * EPS_SMALL
+         '   EgtOutLog("WARNINGS: Saw tickness is more width then interaxis")
+         'Else
+         '   dMinDist = dOffsXIntery + 5 * EPS_SMALL
+         'End If
       Else
          EgtOutLog("Not found current saw for frames mindist")
-         dMinDist = 0
+         dMinDist = dOffsXIntery
       End If
       ' Inserisco il pezzo nel grezzo
       Dim ptIns As Point3d

LicenseWindow.xaml

@@ -0,0 +1,63 @@
+<Window x:Class="LicenseWindow"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="OpenFile" Height="587.4" Width="500.6" WindowStyle="None"         
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid>
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.2*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="5.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <StackPanel Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3"
+                        Orientation="Horizontal"
+                        HorizontalAlignment="Center">
+                <TextBlock Name="IconTxBl" Foreground="White" FontSize="32" 
+                           VerticalAlignment="Center" HorizontalAlignment="Center"/>
+                <TextBlock Name="LicenseTxBl"  
+                   Foreground="White" FontSize="20" 
+                   VerticalAlignment="Center" HorizontalAlignment="Left"
+                   TextWrapping="Wrap"/>
+            </StackPanel>
+
+            <StackPanel Grid.Column="1" Grid.Row="2"  Orientation="Horizontal"
+                        HorizontalAlignment="Center">
+                <ScrollViewer Name="MyScrollViewer" VerticalScrollBarVisibility="Auto">
+                <TextBlock Name="LicenseMsgTxBl" MaxWidth="425"
+                       HorizontalAlignment="Center"
+                       Foreground="{DynamicResource Omag_White}" FontSize="20" VerticalAlignment="Center"
+                       TextWrapping="Wrap"/>
+                </ScrollViewer>
+            </StackPanel>
+            <Grid Grid.Column="1" Grid.Row="4">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+</Window>

LicenseWindow.xaml.vb

@@ -0,0 +1,37 @@
+Public Class LicenseWindow
+
+   Private m_sMessage As String = String.Empty
+   Private m_sTitle As String = String.Empty
+
+   Public Sub New(Owner As Window, sMsg As String, sTitle As String)
+      Me.Owner = Owner
+      m_sMessage = sMsg
+      m_sTitle = sTitle
+
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+
+   End Sub
+
+   Public Sub Init() Handles Me.Initialized
+      IconTxBl.Text = "⚠️"
+      LicenseTxBl.Text = m_sTitle
+      m_sMessage = m_sMessage.Replace("/n", "£")
+      Dim sItems As String() = m_sMessage.Split("£")
+      For Index As Integer = 0 To sItems.Count - 1
+         If Index = 0 Then
+            m_sMessage = sItems(Index)
+         Else
+            m_sMessage &= vbCrLf & sItems(Index)
+         End If
+      Next
+      LicenseMsgTxBl.Text = m_sMessage
+   End Sub
+
+   Public Sub Exit_Click() Handles ExitBtn.Click
+      Me.Close()
+   End Sub
+
+End Class

Machine/AlarmsPageUC.xaml.vb

@@ -57,6 +57,7 @@ Public Class AlarmsPageUC
 
       ' Imposto i messaggi letti dal file dei messaggi
       CurrSawTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 1)
+      CurrSawTiltedTxBl.Text = EgtMsg(91049)                             ' Current saw tilted
       AuxiliaryToolTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 2)
       CurrDrillTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 3)
       CurrCupWheelTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 20)
@@ -97,7 +98,10 @@ Public Class AlarmsPageUC
       HolesOffsetWJTxBl.Text = "Offset"
       MinRadiusWJTxBl.Text = "Min Radius"
       OneHoleInCornerWJTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 26)
-      '--  FINE  -- nuovi parametri per preforo lavello
+      '-- INIZIO -- nuovi parametro Rettifica tagli sottosquadra WJ
+      REctificationWJParamGpBx.Header = "Rectification"
+      EnableRectificationTxBl.Text = "Enable (on subsquare angle)"
+      '--  FINE  -- nuovi parametro Rettifica tagli sottosquadra WJ
       NestingParamGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 31)            ' Nesting
       AlignTxBl.Text = EgtMsg(90932)                                     ' Allineato
       GhigliottinaTxBl.Text = EgtMsg(91066)                              ' Ghigliottina
@@ -117,6 +121,7 @@ Public Class AlarmsPageUC
       CfrPercTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 48)                   ' Riduzione %
       MachiningsGpBx.Header = EgtMsg(MSG_ALARMS2PAGEUC + 1)              ' Lavorazioni
       CurrSawingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 2)                ' Taglio lama
+      CurrSawingTiltedTxBl.Text = EgtMsg(91050)                          ' Taglio inclinato
       CurrDrillingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 3)              ' Foratura
       CurrMillingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 4)               ' Fresatura
       CurrPocketingTxBl.Text = EgtMsg(91069)                             ' Svuotatura
@@ -156,7 +161,7 @@ Public Class AlarmsPageUC
                HolesGpBx.Visibility = Windows.Visibility.Hidden
             Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL
             'Non faccio alcunchè
-            Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER
+            Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
                'Da implementare
          End Select
 
@@ -175,6 +180,7 @@ Public Class AlarmsPageUC
          ' Se non previsti tagli waterjet, disabilito relativo box
          If Not m_CurrentMachine.bWaterJetting Then
             WjsParamGpBx.Visibility = Visibility.Hidden
+            RectificationWJParamGpBx.Visibility = Visibility.Hidden
          End If
 
          ' Abilitazione box per contorni grezzo da foto
@@ -288,6 +294,59 @@ Public Class AlarmsPageUC
             ' attivo il bottone per l'apertura della pagina che mostra la configurazione degli utensili in parcheggio
             SetUpBtn.Visibility = Windows.Visibility.Visible
 
+         Case CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
+            ' Aggiorno la lista delle lame con quelle montate sul portautensile automatico
+            Dim m_SawOnHolderList As New ObservableCollection(Of String)
+            Dim bOnHolder As Boolean = False
+            For Each sNameTool As String In m_SawList
+               If Not String.IsNullOrEmpty(sNameTool) Then
+                  ' Verifico che sia montata su un portautensile
+                  EgtTdbSetCurrTool(sNameTool)
+                  Dim sTCPos As String = String.Empty
+                  EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sTCPos)
+                  If Not String.IsNullOrEmpty(sTCPos) Then
+                     ' Cerco nel porta utensili automaitico 
+                     For Each ToolPosition As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+                        If ToolPosition.sTool <> String.Empty Then
+                           If sNameTool = ToolPosition.sTool Then
+                              m_SawOnHolderList.Add(sNameTool)
+                              ' Se il nome dell'utensile è lo stesso di quello impostato nella combo allora lo setto
+                              If sNameTool = m_CurrentMachine.sCurrSaw Then
+                                 bOnHolder = True
+                              End If
+                              Exit For
+                           End If
+                        End If
+                     Next
+                  End If
+               End If
+            Next
+            m_SawList = m_SawOnHolderList
+            CurrSawCmBx.ItemsSource = m_SawList
+            If bOnHolder Then
+               ' reimposto la lavorazione di lama e la lama impostate in macchina
+               EgtTdbSetCurrTool(m_CurrentMachine.sCurrSaw)
+               ' Seleziono lama corrente
+               CurrSawCmBx.SelectedItem = m_CurrentMachine.sCurrSaw
+            Else
+               m_CurrentMachine.sCurrSawing = ""
+            End If
+
+            CurrSawTiltedCmBx.ItemsSource = m_SawList
+            If m_SawList.IndexOf(m_CurrentMachine.sCurrSawTilted) > -1 Then
+               ' Seleziono lama corrente
+               CurrSawTiltedCmBx.SelectedItem = m_CurrentMachine.sCurrSawTilted
+            Else
+               m_CurrentMachine.sCurrSawingTilted = ""
+            End If
+
+            ' attivo la selezione della lama per il taglio in inlinato
+            CurrSawTiltedTxBl.Visibility = Visibility.Visible
+            CurrSawTiltedCmBx.Visibility = Visibility.Visible
+
+            ' attivo il bottone per l'apertura della pagina che mostra la configurazione degli utensili in parcheggio
+            SetUpBtn.Visibility = Windows.Visibility.Visible
+
       End Select
 
       ' aggiorno le TextBlock con le lavorazioni correnti
@@ -354,7 +413,9 @@ Public Class AlarmsPageUC
       MinRadiusWJTxBx.Text = LenToString(dVal, 2)
       OneHoleInCornerWJChBx.IsChecked =
          (GetPrivateProfileInt(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
-
+      ' leggo se attiva la rettifica degli angoli per WaterJet
+      EnableRectificationChBx.IsChecked =
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, 0, m_MainWindow.GetMachIniFile()) <> 0)
       ' Leggo accorciamento angoli con fresa
       dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
       ShortTxBx.Text = LenToString(dVal, 2)
@@ -435,6 +496,21 @@ Public Class AlarmsPageUC
          CurrSawingTxBl.Visibility = Windows.Visibility.Hidden
          CurrSawingTxBx.Visibility = Windows.Visibility.Hidden
       End If
+      If m_CurrentMachine.sCurrSawingTilted <> String.Empty Then
+         If Not m_CurrentMachine.bApplySawingTilted Then
+            CurrSawingTiltedTxBx.Foreground = Brushes.Gray
+            CurrSawingTiltedTxBx.TextDecorations = TextDecorations.Strikethrough
+         Else
+            CurrSawingTiltedTxBx.Foreground = Brushes.White
+            CurrSawingTiltedTxBx.TextDecorations = Nothing
+         End If
+         CurrSawingTiltedTxBx.Text = m_CurrentMachine.sCurrSawingTilted
+         CurrSawingTiltedTxBl.Visibility = Windows.Visibility.Visible
+         CurrSawingTiltedTxBx.Visibility = Windows.Visibility.Visible
+      Else
+         CurrSawingTiltedTxBl.Visibility = Windows.Visibility.Hidden
+         CurrSawingTiltedTxBx.Visibility = Windows.Visibility.Hidden
+      End If
       If m_CurrentMachine.sCurrDrilling <> String.Empty Then
          CurrDrillingTxBx.Text = m_CurrentMachine.sCurrDrilling
          CurrDrillingTxBl.Visibility = Windows.Visibility.Visible
@@ -635,6 +711,42 @@ Public Class AlarmsPageUC
       RefreschMachining()
    End Sub
 
+   ' -- SAW TILTED --
+   Private Sub CurrSawTiltedCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles CurrSawTiltedCmBx.SelectionChanged
+      If IsNothing(CurrSawTiltedCmBx.SelectedItem) Then Return
+      ' Assegno
+      m_CurrentMachine.sCurrSawTilted = CurrSawTiltedCmBx.SelectedItem.ToString()
+      ' Se nuova lama incompatibile con lavorazione di taglio corrente, resetto quest'ultima
+      Dim sMchTuuid As String = String.Empty
+      Dim sMchTool As String = String.Empty
+      If Not EgtMdbSetCurrMachining(m_CurrentMachine.sCurrSawingTilted) Or
+         Not EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sMchTuuid) Or
+         Not EgtTdbGetToolFromUUID(sMchTuuid, sMchTool) Or
+         String.Compare(sMchTool, m_CurrentMachine.sCurrSawTilted, True) <> 0 Then
+         m_CurrentMachine.sCurrSawingTilted = String.Empty
+      End If
+
+      ' Dim sVal As String = String.Empty
+      ' Dim dVal As Double = 0
+      ' If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSaw) Then
+      '    StringToDouble(sVal, dVal)
+      '    m_CurrentMachine.SetFsevLength(dVal)
+      ' End If
+      ' If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSaw) Then
+      '    StringToDouble(sVal, dVal)
+      '    m_CurrentMachine.SetFsevPerc(dVal)
+      ' End If
+      ' 
+      ' ' Leggo parametri per variazione feed in tagli aggiornati in funzione della lama
+      ' CfrLenTxBx.Text = LenToString(m_CurrentMachine.dFsevLength, 3)
+      ' CfrPercTxBx.Text = DoubleToString(m_CurrentMachine.dFsevPerc, 0)
+
+      ' Aggiorno utensili per lavoro in corso
+      m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
+      ' aggiorno la lista delle lavorazioni
+      RefreschMachining()
+   End Sub
+
    ' -- DRILL --
    Private Sub CurrDrillCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles CurrDrillCmBx.SelectionChanged
       If IsNothing(CurrDrillCmBx.SelectedItem) Then Return
@@ -970,9 +1082,18 @@ Public Class AlarmsPageUC
          WritePrivateProfileString(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, "0", m_MainWindow.GetMachIniFile())
       End If
    End Sub
-
    ' --   FINE   -- nuovi parametri per prefori WaterJet
 
+   ' -- INIZIO -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+   Private Sub EnableRectificationChBx_Click(sender As Object, e As EventArgs) Handles EnableRectificationChBx.Click
+      If EnableRectificationChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "1", m_MainWindow.GetMachIniFile)
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "0", m_MainWindow.GetMachIniFile)
+      End If
+   End Sub
+   ' --   FINE   -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+
    Private Sub TmEnableChBx_Click(sender As Object, e As RoutedEventArgs) Handles TmEnableChBx.Click
       If TmEnableChBx.IsChecked() Then
          WritePrivateProfileString(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, "1", m_MainWindow.GetMachIniFile())
@@ -1163,6 +1284,10 @@ Public Class AlarmsPageUC
          Case 3
             Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(0)
             EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+         Case 4
+            ' FANUC - Manual:7, Edit:1
+            Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(7)
+            EgtOutLog("Impostata modalità manuale: esito " & nResult.ToString)
       End Select
       ' Recupero file LUA
       EgtLuaExecFile(m_CurrentMachine.sMachDir() & "\DirectCmd\SawProbing.lua")
@@ -1174,6 +1299,7 @@ Public Class AlarmsPageUC
       Dim dToolDiam As Double = 0
       Dim dToolThick As Double = 0
       Dim dToolLen As Double = 0
+      Dim dCore As Double = 0
       Dim sToolParam As String = String.Empty
       EgtTdbGetCurrToolParam(MCH_TP.HEAD, sToolParam)
       EgtLuaSetGlobStringVar("CMD.HEAD", sToolParam)
@@ -1185,6 +1311,14 @@ Public Class AlarmsPageUC
       EgtLuaSetGlobNumVar("CMD.THICK", dToolThick * 1000)
       EgtTdbGetCurrToolParam(MCH_TP.LEN, dToolLen)
       EgtLuaSetGlobNumVar("CMD.LENGTH", dToolLen * 1000)
+      EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore)
+      EgtLuaSetGlobNumVar("CMD.CORE", dCore * 1000)
+      ' Nuova varibile per gestione tastatura utensili Frankfurt (Polishing)
+      Dim nType As Integer
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      If m_CurrentMachine.bPolishingWheel AndAlso nType = MCH_TY.MILL_POLISHING Then
+         EgtLuaSetGlobStringVar("CMD.POLISHING", "1")
+      End If
       EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
       EgtLuaCallFunction("CMD.CmdString")
       ' Leggo variabili
@@ -1228,11 +1362,16 @@ Public Class AlarmsPageUC
          Return
       End If
       m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      ' Se fanuc passo in modalità AUTO e attivo
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(0)
+         EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+      End If
       ' Aspetto e lo avvio
       System.Threading.Thread.Sleep(300)
       m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
       ' Creo MsgBox di attesa
-      Dim MsgBoxStateInfo As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_DIRECTCUTPAGEUC + 41), EgtMsg(MSG_DIRECTCUTPAGEUC + 42), True, EgtMsgBox.Buttons.CANCEL, EgtMsgBox.Icons.NULL)
+      Dim MsgBoxStateInfo As New EgtMsgBox(m_MainWindow, String.Format(EgtMsg(MSG_DIRECTCUTPAGEUC + 41), ToolForProbing.m_ToolName), EgtMsg(MSG_DIRECTCUTPAGEUC + 42), True, EgtMsgBox.Buttons.CANCEL, EgtMsgBox.Icons.NULL)
       m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
       ' Definisco flag tastatura
       Dim bProbingOk As Boolean = False
@@ -1277,6 +1416,10 @@ Public Class AlarmsPageUC
          Dim bRead As Boolean = False
          Dim SawDiameterNameVar As String = String.Empty
          GetPrivateProfileString(S_MACH_PROBING, K_SAWDIAMETER, "", SawDiameterNameVar, m_MainWindow.GetMachIniFile())
+         ' Se utensile non lama, allora la variabile in cui leggo il dato potrebbe essere differente
+         If Not ToolForProbing.m_IsSaw Then
+            GetPrivateProfileString(S_MACH_PROBING, K_TOOLLENGTH, SawDiameterNameVar, SawDiameterNameVar, m_MainWindow.GetMachIniFile())
+         End If
          m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
          For I As Integer = 0 To 20
             ' Devo rileggere la variabile ad ogni ciclo
@@ -1285,7 +1428,10 @@ Public Class AlarmsPageUC
             If m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
                bRead = True
                Dim dVal As Double = m_MainWindow.m_CNCommunication.m_CN.d_DReadELS_value
-               dVal = dVal / 1000
+               ' Se fanuc il dato è in mm (NON MICRON)
+               If m_MainWindow.m_CNCommunication.m_nNCType <> 4 Then
+                  dVal = dVal / 1000
+               End If
                MsgBoxStateInfo.LoadingPrBr_Value = 100
                ' Tastatura conclusa con successo
                Dim sOut As String = EgtMsg(MSG_DIRECTCUTPAGEUC + 43) & " : " & DoubleToString(dVal, 1)
@@ -1335,7 +1481,7 @@ Public Class AlarmsPageUC
       Select Case m_CurrentMachine.MountedToolConfig
          Case CurrentMachine.MountedToolConfigs.SAW
             Return New ToolPos(m_CurrentMachine.sCurrSaw, "T100", True)
-         Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL, CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER
+         Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL, CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
             Dim ChooseTool As New ChooseToolWD(m_MainWindow)
             If ChooseTool.ShowDialog Then
                Return ChooseTool.GetSelectedTool

Machine/ChooseToolWD.xaml.vb

@@ -76,6 +76,18 @@ Public Class ChooseToolWD
                End If
             Next
             Return True
+         Case CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  m_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+               End If
+            Next
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  m_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+               End If
+            Next
+            Return True
          Case Else
             Return False
       End Select

Machine/CurrentMachine.vb

@@ -1,6 +1,7 @@
 Imports System.Collections.ObjectModel
 Imports EgtWPFLib5
 Imports EgtUILib
+Imports System.IO
 
 Public Class CurrentMachine
 
@@ -51,6 +52,10 @@ Public Class CurrentMachine
    Private m_sProdLiProbingState2Var As String = ""
    Private m_sProdLiProbingTcPos2Var As String = ""
    Private m_sProdLiSawDiameter2Var As String = ""
+   Private m_sClickState As String = "E80028"
+   Private m_sClickDir As String = ""
+   ' Gestione speciale per canali CN
+   Private m_sExtFileCN As String = ".0"
 
    ' Numero e tipo di utensili correntemente disponibili sulla macchina
    Private m_MountedToolConfig As MountedToolConfigs = MountedToolConfigs.SAW
@@ -77,6 +82,9 @@ Public Class CurrentMachine
    Private m_bPolishingWheel As Boolean = False
    Private m_bWaterJet As Boolean = False
 
+   ' Flag che indica se gesire l'inversione del taglio nei tagli singoli
+   Private m_bEnableInvetrt As Boolean = True
+
    ' Abilitazione DB WaterJet
    Private m_bFromDBWaterJet As Boolean = False
 
@@ -99,6 +107,7 @@ Public Class CurrentMachine
 
    ' Variabili che contengono il nome degli utensili disponibili per tipo
    Private m_sCurrSaw As String = String.Empty
+   Private m_sCurrSawTilted As String = String.Empty
    Private m_sCurrDrill As String = String.Empty
    Private m_sCurrMill As String = String.Empty
    Private m_sCurrMillNoTip As String = String.Empty
@@ -108,6 +117,8 @@ Public Class CurrentMachine
 
    ' Variabili che contengono le lavorazioni correntemente attive (utilizzate per definire lavorazioni nel programma)
    Private m_sCurrSawing As String = String.Empty
+   Private m_sCurrSawingTilted As String = String.Empty
+   Private m_bApplySawingTilted As Boolean = False
    Private m_sCurrDrilling As String = String.Empty
    Private m_sCurrMilling As String = String.Empty
    Private m_sCurrPocketing As String = String.Empty
@@ -131,6 +142,8 @@ Public Class CurrentMachine
    Private m_dPhotoOffsetY As Double = 0
    Private m_dTab2PhotoOffsetX As Double = 0
    Private m_dTab2PhotoOffsetY As Double = 0
+   Private m_dHQPhotoOffsetX As Double = 0
+   Private m_dHQPhotoOffsetY As Double = 0
 
    ' Abilitazione scelta restart
    Private m_bEnableRestart As Boolean = False
@@ -183,6 +196,7 @@ Public Class CurrentMachine
       SAWANDAUXTOOL = 1
       MANUALTOOLCHANGER = 2
       TOOLCHANGER = 3
+      TOOLCHANGERWITHSAW = 4
    End Enum
 
    ' Massimo numero di utensili su Tc
@@ -191,8 +205,18 @@ Public Class CurrentMachine
    ' Massimo numero di utensili su Tc manuale
    Friend MAX_TCMAN_TOOLS As Integer = 60
 
+   ' Massima profondità lavorabile nei tagli diretti
+   Private m_MaxTabDepth As Double = 10.0
+
+   ' Massima altezza lavorabile con lama grande
+   Private m_dHighPieceZ As Double = 200.0
 
 #Region "Proprietà che leggono e scrivono i valori anche da o su file ini"
+   Friend ReadOnly Property MaxTabDepth As Double
+      Get
+         Return m_MaxTabDepth
+      End Get
+   End Property
 
    Friend ReadOnly Property sMachineName As String
       Get
@@ -313,7 +337,7 @@ Public Class CurrentMachine
          Return m_bAskNewOnResend
       End Get
    End Property
-   
+
 
    Friend ReadOnly Property nProdLiSawProbe As Integer
       Get
@@ -321,6 +345,24 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property sClickState As String
+      Get
+         Return m_sClickState
+      End Get
+   End Property
+
+   Friend ReadOnly Property sClickDir As String
+      Get
+         Return m_sClickDir
+      End Get
+   End Property
+
+   Friend ReadOnly Property sExtFileCN As String
+      Get
+         Return m_sExtFileCN
+      End Get
+   End Property
+
    Friend Function sProdLiProbingStateVar(nI As Integer) As String
       If nI = 1 Then Return m_sProdLiProbingStateVar
       If nI = 2 Then Return m_sProdLiProbingState2Var
@@ -535,6 +577,18 @@ Public Class CurrentMachine
       End Set
    End Property
 
+   Friend Property sCurrSawTilted As String
+      Get
+         Return m_sCurrSawTilted
+      End Get
+      Set(value As String)
+         If WritePrivateProfileString(S_MACH_MACH, K_CURRSAWTILTED, value, sMachIniFile) Then
+            m_sCurrSawTilted = value
+            ' m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text = value
+         End If
+      End Set
+   End Property
+
    Friend Property sCurrDrill As String
       Get
          Return m_sCurrDrill
@@ -609,18 +663,32 @@ Public Class CurrentMachine
          If WritePrivateProfileString(S_MACH_MACH, K_CURRSAWING, value, sMachIniFile) Then
             m_sCurrSawing = value
             m_MainWindow.m_CurrentProjectPageUC.MachiningTxBx.Text = value
-            '' aggiorno il file ini della macchina con i valori correnti della lavorazione
-            'Dim sVal As String = String.Empty
-            'Dim dVal As Double = m_dFsevLength
-            'If GetUserNote("FsevLength", sVal, m_sCurrSawing, False) Then
-            '   StringToDouble(sVal, dVal)
-            '   SetFsevLength(dVal)
-            'End If
-            'dVal = m_dFsevPerc
-            'If GetUserNote("FsevPerc", sVal, m_sCurrSawing, False) Then
-            '   StringToDouble(sVal, m_dFsevPerc)
-            '   SetFsevPerc(dVal)
-            'End If
+         End If
+      End Set
+   End Property
+
+   Friend Property sCurrSawingTilted As String
+      Get
+         Return m_sCurrSawingTilted
+      End Get
+      Set(value As String)
+         If WritePrivateProfileString(S_MACH_MACH, K_CURRSAWINGTILTED, value, sMachIniFile) Then
+            m_sCurrSawingTilted = value
+            'm_MainWindow.m_CurrentProjectPageUC.MachiningTxBx.Text = value
+         End If
+      End Set
+   End Property
+
+   Friend Property bApplySawingTilted As Boolean
+      Get
+         Return m_bApplySawingTilted
+      End Get
+      Set(value As Boolean)
+         m_bApplySawingTilted = value
+         If m_bApplySawingTilted Then
+            WritePrivateProfileString(S_MACH_MACH, K_APPLYSAWINGTILTED, "1", sMachIniFile)
+         Else
+            WritePrivateProfileString(S_MACH_MACH, K_APPLYSAWINGTILTED, "0", sMachIniFile)
          End If
       End Set
    End Property
@@ -731,6 +799,10 @@ Public Class CurrentMachine
       Set(value As String)
          If WritePrivateProfileString(S_MACH_MACH, K_CURRWATERJETTING, value, sMachIniFile) Then
             m_sCurrWaterJetting = value
+            If m_MainWindow.m_CurrentMachine.bWaterJet And EgtGetHeadId("H1") = GDB_ID.NULL Then
+               m_MainWindow.m_CurrentProjectPageUC.MachiningTxBx.Text = value
+            End If
+
          End If
       End Set
    End Property
@@ -752,6 +824,12 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property bEnableInvert As Boolean
+      Get
+         Return m_bEnableInvetrt
+      End Get
+   End Property
+
    Friend Property dAdditionalTable As Double
       Get
          Select Case GetCurrentTable()
@@ -779,7 +857,7 @@ Public Class CurrentMachine
                      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, value)
                   End If
                End If
-                  Case 2
+            Case 2
                If Math.Abs(value - m_dTab2AdditionalTable) > EPS_SMALL And
                WritePrivateProfileString(S_TABLE, K_TAB2_ADDITIONALTABLE, DoubleToString(value, 3), sMachIniFile) Then
                   ' Aggiorno il valore corrente
@@ -821,6 +899,10 @@ Public Class CurrentMachine
             Case 2
                Return New Vector3d(m_dTab2PhotoOffsetX, m_dTab2PhotoOffsetY, 0)
             Case Else
+               ' verifico quale delle due fotocamere è attualmente attiva
+               If GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ACTIVATE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
+                  Return New Vector3d(m_dHQPhotoOffsetX, m_dHQPhotoOffsetY, 0)
+               End If
                Return New Vector3d(m_dPhotoOffsetX, m_dPhotoOffsetY, 0)
          End Select
       End Get
@@ -1100,6 +1182,12 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property dHighPieceZ As Double
+      Get
+         Return m_dHighPieceZ
+      End Get
+   End Property
+
 #End Region
 
    Sub New()
@@ -1111,6 +1199,8 @@ Public Class CurrentMachine
       m_sMachIniFile = m_MainWindow.GetMachinesRootDir & "\" & sMachineName & "\" & sMachineName & ".ini"
       ' Leggo estensione del file programma pezzo
       GetPrivateProfileString(S_PARTPROGRAM, K_EXTENSION, "xpi", m_sIsoFileExt, sMachIniFile)
+      ' per gestione canali separati (macchina NUM con più di 5 Assi) ver. 2.5g1
+      GetPrivateProfileString(S_PARTPROGRAM, K_EXTFILECN, ".0", m_sExtFileCN, sMachIniFile)
       If m_sIsoFileExt(0) <> "." Then m_sIsoFileExt = "." & m_sIsoFileExt
       ' Leggo flag incremento asse C
       m_dDeltaC = GetPrivateProfileDouble(S_AXES, K_DELTA_C, 0.0, sMachIniFile)
@@ -1144,6 +1234,13 @@ Public Class CurrentMachine
       GetPrivateProfileString(S_PRODUCTIONLINE, K_PRODLIPROBINGTCPOS2VAR, "0", m_sProdLiProbingTcPos2Var, sMachIniFile)
       GetPrivateProfileString(S_PRODUCTIONLINE, K_PRODLISAWDIAMETER2VAR, "", m_sProdLiSawDiameter2Var, sMachIniFile)
 
+      GetPrivateProfileString(S_POLISHLINE, K_CLICKSTATE, "", m_sClickState, sMachIniFile)
+      GetPrivateProfileString(S_POLISHLINE, k_CLICKDIR, "", m_sClickDir, sMachIniFile)
+      If Not Directory.Exists(m_sClickDir) Then
+         m_sClickState = ""
+         EgtOutLog("Directory " & m_sClickDir & " does not exist")
+      End If
+
       ' Leggo configurazione degli utensili in macchina
       m_MountedToolConfig = GetPrivateProfileInt(S_TOOLS, K_MOUNTEDTOOLCONFIG, 0, sMachIniFile)
       ' Leggo flag presenza tipologie utensili
@@ -1200,10 +1297,20 @@ Public Class CurrentMachine
                         m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.ENABLE_WJ)
       ' possibilità di definire attacco speciale per materiali ceramici
       m_bSawingSpecialLeadIn = (GetPrivateProfileInt(S_MACHININGS, K_SAWINGSPECIALLEADIN, 0, sMachIniFile) > 0)
+      ' mantengo la direzione del taglio definita nel taglio diretto
+      m_bEnableInvetrt = (GetPrivateProfileInt(S_DIRECTCUTS, K_ENABLEINVERT, 1, sMachIniFile) <> 0)
 
       ' Leggo utensili correnti
       ' lama
       GetPrivateProfileString(S_MACH_MACH, K_CURRSAW, Nothing, m_sCurrSaw, sMachIniFile)
+      ' lama inclinata
+      If m_nShowToolChanger = 4 Then
+         GetPrivateProfileString(S_MACH_MACH, K_CURRSAWTILTED, Nothing, m_sCurrSawTilted, sMachIniFile)
+      Else
+         ' se non è configurato il cambio utensile e allora imposto l'unica lama disponibile per i tagli inclinati
+         m_sCurrSawTilted = m_sCurrSaw
+      End If
+
       ' foretto
       GetPrivateProfileString(S_MACH_MACH, K_CURRDRILL, Nothing, m_sCurrDrill, sMachIniFile)
       ' fresa
@@ -1220,6 +1327,10 @@ Public Class CurrentMachine
       ' Leggo lavorazioni correnti
       ' lama
       GetPrivateProfileString(S_MACH_MACH, K_CURRSAWING, Nothing, m_sCurrSawing, sMachIniFile)
+      ' lama inlicnata
+      GetPrivateProfileString(S_MACH_MACH, K_CURRSAWINGTILTED, Nothing, m_sCurrSawingTilted, sMachIniFile)
+      ' applica lavorazione di lama inclinata
+      m_bApplySawingTilted = (GetPrivateProfileInt(S_MACH_MACH, K_APPLYSAWINGTILTED, 0, sMachIniFile) <> 0)
       ' foretto
       GetPrivateProfileString(S_MACH_MACH, K_CURRDRILLING, Nothing, m_sCurrDrilling, sMachIniFile)
       ' fresa
@@ -1282,6 +1393,8 @@ Public Class CurrentMachine
       m_dPhotoOffsetY = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_OFFSETY, 0, sMachIniFile)
       m_dTab2PhotoOffsetX = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_TAB2_OFFSETX, 0, sMachIniFile)
       m_dTab2PhotoOffsetY = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_TAB2_OFFSETY, 0, sMachIniFile)
+      m_dHQPhotoOffsetX = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_HQ_OFFSETX, 0, sMachIniFile)
+      m_dHQPhotoOffsetY = GetPrivateProfileDouble(S_PHOTO, K_PHOTO_HQ_OFFSETY, 0, sMachIniFile)
 
       ' Leggo abilitazione per restart
       m_bEnableRestart = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENABLERESTART, 0, sMachIniFile) <> 0)
@@ -1349,6 +1462,38 @@ Public Class CurrentMachine
       m_HasRawProbe = (GetPrivateProfileInt(S_MACH_PROBING, K_ENABLERAWPROBE, 1, sMachIniFile) <> 0)
       ' leggo se la macchina ha il lettore di codice a barre della lastra
       m_nEnableBarCodeReader = GetPrivateProfileInt(S_MACH_BARCODEREADER, K_ENABLEBCR, 0, sMachIniFile)
+
+      ' affonadamento massimo oltre la tavola (inidicata in positivo!)
+      m_MaxTabDepth = GetPrivateProfileDouble(S_MACH_NEST, "MaxTabDepth", 10.0, m_MainWindow.GetMachIniFile())
+      If m_MaxTabDepth < 0 Then
+         m_MaxTabDepth = 10.0
+      End If
+
+      ' Massimo spessore lavorabile con lama grande
+      m_dHighPieceZ = GetPrivateProfileDouble(S_RAWMOVE, "MaxHeightPiece", 800.0, m_MainWindow.GetMachIniFile())
+   End Sub
+
+   ' Per il controllo FANUC al momento dell'inizializzazione del CN devono essere lette alcune variabili
+   Public Sub InitFANUC(CN_Generic As CN_generico)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nResetSendDelay = GetPrivateProfileInt(S_NCFANUC, K_RESETSENDDELAY, 1000, sMachIniFile)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nThreadSleep = GetPrivateProfileInt(S_NCFANUC, K_THREADSLEEP, 150, sMachIniFile)
+      ' Leggo i dati strettamente correlati alla comunicazione NC-PC
+      Dim CN As CN_generico = CN_Generic
+      ' Leggo l'indirizzo in cui scrivere lo stato macchina
+      Dim dAddNcMode As String = CN.s_addr_set_nc_mode
+      GetPrivateProfileString(S_NCFANUC, K_SETNCMODE, CN.s_addr_set_nc_mode, CN.s_addr_set_nc_mode, sMachIniFile)
+      ' Leggo primo indirizzo libero delle variabili di tipo intero
+      CN.n_Base_addr_int_vars = GetPrivateProfileInt(S_NCFANUC, K_BASEADDRINT, CN.n_Base_addr_int_vars, sMachIniFile)
+      ' Leggo primo indirizzo libero delle variabili di tipo bit
+      CN.n_Base_addr_byte_for_bits_vars = GetPrivateProfileInt(S_NCFANUC, K_BASEADDRBIT, CN.n_Base_addr_byte_for_bits_vars, sMachIniFile)
+      ' Leggo numero di variabili di tipo intero
+      CN.n_num_var_int_to_read = CShort(GetPrivateProfileInt(S_NCFANUC, K_NUMVARINT, CInt(CN.n_num_var_int_to_read), sMachIniFile))
+      ' Leggo numero di varibili di tipo bit
+      CN.n_num_var_byte_for_bits_to_read = CShort(GetPrivateProfileInt(S_NCFANUC, K_NUMVARBIT, CInt(CN.n_num_var_byte_for_bits_to_read), sMachIniFile))
+      ' Leggo variabile abilitata alla gestione di FeedHold
+      GetPrivateProfileString(S_NCFANUC, K_SETNCMODE, CN.s_addr_feedhold, CN.s_addr_feedhold, sMachIniFile)
    End Sub
 
    Public Sub LoadWJMaterial(Optional bIsStart As Boolean = False)
@@ -1571,7 +1716,9 @@ Public Class CurrentMachine
       Dim dToolDiam As Double = 0
       EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam)
       ' Confronto con massimo ammesso
-      Return (dToolDiam <= dMaxSawDiamForProbe)
+      Dim bOk As Boolean = dToolDiam <= dMaxSawDiamForProbe
+      If Not bOk Then EgtOutLog("WARNING: Saw diameter to big for probing")
+      Return bOk
    End Function
 
    Friend Function GetPrivateProfileMaterial(

Machine/MachineCNPageUC.xaml

@@ -7,110 +7,123 @@
    mc:Ignorable="d" 
    d:DesignHeight="768" d:DesignWidth="1280">
 
-   <!-- Definizione della ImportPage -->
-   <Border Background="{DynamicResource OmagCut_Gray}" >
+    <!-- Definizione della ImportPage -->
+    <Border Background="{DynamicResource OmagCut_Gray}" >
 
-      <Grid Name="ImportPageGrid">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="7.5*"/>
-            <ColumnDefinition Width="1.5*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="5*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="4.5*"/>
-         </Grid.RowDefinitions>
+        <Grid Name="ImportPageGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="7.5*"/>
+                <ColumnDefinition Width="1.5*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="4.5*"/>
+            </Grid.RowDefinitions>
 
-         <GroupBox Name="CNModeGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.ColumnSpan="2" Margin="0,0,4,0">
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="1.5*"/>
-                  <ColumnDefinition Width="1.5*"/>
-               </Grid.ColumnDefinitions>
+            <GroupBox Name="CNModeGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.ColumnSpan="2" Margin="0,0,4,0">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="1.5*"/>
+                        <ColumnDefinition Width="1.5*"/>
+                    </Grid.ColumnDefinitions>
 
-               <ToggleButton Name="AutoBtn" Grid.Column="0"
+                    <ToggleButton Name="AutoBtn" Grid.Column="0"
                   Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
                   Foreground="White"/>
-               <ToggleButton Name="ManualBtn" Grid.Column="1"
+                    <ToggleButton Name="ManualBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
                   Foreground="White"/>
-               <ToggleButton Name="MDIBtn" Grid.Column="2"
+                    <ToggleButton Name="MDIBtn" Grid.Column="2"
                   Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
                   Foreground="White"/>
-               <ToggleButton Name="SingleBtn" Grid.Column="3"
+                    <ToggleButton Name="SingleBtn" Grid.Column="3"
                   Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
                   Foreground="White"/>
-               <ToggleButton Name="HomeBtn" Grid.Column="4"
+                    <ToggleButton Name="HomeBtn" Grid.Column="4"
                   Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
                   Foreground="White"/>
 
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-         <GroupBox Name="CommandsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.ColumnSpan="2">
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="2*"/>
-               </Grid.ColumnDefinitions>
+            <GroupBox Name="CommandsGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.ColumnSpan="2">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
 
                     <Button Name="StartBtn" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="StopBtn" Grid.Column="1"
+                    <Button Name="StopBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="ResetBtn" Grid.Column="2"
+                    <Button Name="ResetBtn" Grid.Column="2"
                   Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
 
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
             <GroupBox Name="MDICommandGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="1">
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="6*"/>
-                  <ColumnDefinition Width="1.5*"/>
-               </Grid.ColumnDefinitions>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="6*"/>
+                        <ColumnDefinition Width="1.5*"/>
+                    </Grid.ColumnDefinitions>
 
                     <EgtWPFLib:EgtTextBox Name="MDITxBx" Margin="10,0,10,0" Style="{DynamicResource OmagCut_MDIKeyboardTextBox}"/>
-               <Button Name="MDIConfirmBtn" Grid.Column="1" 
+                    <Button Name="MDIConfirmBtn" Grid.Column="1" 
                Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
 
-            </Grid>
+                </Grid>
 
-         </GroupBox>
+            </GroupBox>
 
-         <GroupBox Name="PartProgTransferGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="2"
+            <GroupBox Name="CameraHQ" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="1" Grid.Column="2" Grid.ColumnSpan="2">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
+                    <ToggleButton Name="CameraHQBtn" Grid.Column="2"
+                                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                                  Foreground="White"/>
+                </Grid>
+            </GroupBox>
+
+            <GroupBox Name="PartProgTransferGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="2"
             Grid.ColumnSpan="3">
-            <Grid>
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="2*"/>
-               <ColumnDefinition Width="2*"/>
-               <ColumnDefinition Width="2*"/>
-               <ColumnDefinition Width="2*"/>
-               <ColumnDefinition Width="2*"/>
-            </Grid.ColumnDefinitions>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                    </Grid.ColumnDefinitions>
 
-               <Button Name="DownloadBtn" Grid.Column="0"
+                    <Button Name="DownloadBtn" Grid.Column="0"
                Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="UploadBtn" Grid.Column="1"
+                    <Button Name="UploadBtn" Grid.Column="1"
                Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="ActivateBtn" Grid.Column="2"
+                    <Button Name="ActivateBtn" Grid.Column="2"
                Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="DeleteBtn" Grid.Column="3"
+                    <Button Name="DeleteBtn" Grid.Column="3"
                Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <EgtWPFLib:EgtTextBox Name="DULoadTxBx" Grid.Column="4" Width="100" Text="900.0"
+                    <EgtWPFLib:EgtTextBox Name="DULoadTxBx" Grid.Column="4" Width="100" Text="900.0"
                   Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
 
-            </Grid>
-         </GroupBox>
+                </Grid>
+            </GroupBox>
 
             <GroupBox Name="PowerGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="2"
             Grid.Column="3" Grid.ColumnSpan="3" Margin="5,0,0,0">
@@ -131,18 +144,18 @@
             </GroupBox>
 
             <GroupBox Name="ErrorLstGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Row="3" Grid.ColumnSpan="4">
-            <ListBox Name="ErrorLstBx">
-               <ListBox.ItemTemplate>
-                  <DataTemplate>
-                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                  </DataTemplate>
-               </ListBox.ItemTemplate>
-            </ListBox>
+                <ListBox Name="ErrorLstBx">
+                    <ListBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ListBox.ItemTemplate>
+                </ListBox>
 
-         </GroupBox>
+            </GroupBox>
 
-      </Grid>
+        </Grid>
 
-   </Border>
+    </Border>
 
 </UserControl>

Machine/MachineCNPageUC.xaml.vb

@@ -29,6 +29,7 @@ Public Class MachineCNPageUC
       MDICommandGpBx.Header = EgtMsg(MSG_MACHINECNPAGEUC + 16)
       PartProgTransferGpBx.Header = EgtMsg(MSG_MACHINECNPAGEUC + 17)
       ErrorLstGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 12)
+
       ' Attivo gruppo PartProgTransferGpBx leggendo la variabile nel file ini
       If GetPrivateProfileInt(S_GENERAL, K_TESTINGPAGE, 0, m_MainWindow.GetIniFile()) = 1 Then
          PartProgTransferGpBx.Visibility = Windows.Visibility.Visible
@@ -44,6 +45,28 @@ Public Class MachineCNPageUC
       Else
          PowerGpBx.Visibility = Visibility.Collapsed
       End If
+
+      ' verifico che sia attiva la modalità per l'uso di due fotocamere
+      If GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ENABLE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
+         CameraHQ.Visibility = Visibility.Visible
+         CameraHQ.Header = "Photo on table"
+         CameraHQBtn.Content = "HQ"
+         ' verifico quale camera è impostata
+         If GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ACTIVATE, 0, m_MainWindow.GetMachIniFile()) = 1 Then
+            CameraHQBtn.IsChecked = True
+            If Not IsNothing(m_MainWindow.m_CadCutPageUC.PhotoIMG) Then
+               m_MainWindow.m_CadCutPageUC.PhotoIMG.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/icone-tagli-1HQ.png", UriKind.Relative))
+            End If
+         Else
+            CameraHQBtn.IsChecked = False
+            If Not IsNothing(m_MainWindow.m_CadCutPageUC.PhotoIMG) Then
+               m_MainWindow.m_CadCutPageUC.PhotoIMG.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/icone-tagli-1.png", UriKind.Relative))
+            End If
+         End If
+      Else
+         CameraHQ.Visibility = Visibility.Collapsed
+      End If
+
    End Sub
 
    Private Sub TestingPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -203,6 +226,20 @@ Public Class MachineCNPageUC
       m_CN.DGeneralFunctions_WriteCncMode(8)
    End Sub
 
+   Private Sub CameraHQBtn_Click(sender As Object, e As RoutedEventArgs) Handles CameraHQBtn.Click
+      Dim sEnableHQ As String = If(CameraHQBtn.IsChecked, "1", "0")
+      WritePrivateProfileString(S_CAMERAHQ, K_CAMERAHQ_ACTIVATE, sEnableHQ, m_MainWindow.GetMachIniFile())
+      If CameraHQBtn.IsChecked Then
+         If Not IsNothing(m_MainWindow.m_CadCutPageUC.PhotoIMG) Then
+            m_MainWindow.m_CadCutPageUC.PhotoIMG.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/icone-tagli-1HQ.png", UriKind.Relative))
+         End If
+      Else
+         If Not IsNothing(m_MainWindow.m_CadCutPageUC.PhotoIMG) Then
+            m_MainWindow.m_CadCutPageUC.PhotoIMG.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/icone-tagli-1.png", UriKind.Relative))
+         End If
+      End If
+   End Sub
+
    Private Sub MDITxBx_KeyDown(sender As Object, e As KeyEventArgs) Handles MDITxBx.KeyDown
       If e.Key = Key.Return Then
          ' leggo se stato reset

Machine/MachinePageUC.xaml.vb

@@ -298,6 +298,8 @@ Public Class MachinePageUC
             WaterJetBtn.IsChecked = False
             MachinePageGrid.Children.Remove(m_WaterJetPageUC)
             MachinePageGrid.Children.Add(m_MachiningDbPageUC)
+            ' Aggiorno lista materiali
+            m_MainWindow.m_CurrentMachine.LoadWJMaterial()
             m_ActiveMachinePage = MachinePages.MachiningDb
          Case MachinePages.MachineCN
             MachiningDBBtn.IsChecked = True

Machine/MachineStatusUC.xaml.vb

@@ -248,16 +248,16 @@ Public Class MachineStatusUC
          dL3 = ptTip.z
       End If
       ' Visualizzazione
-      Axis1TxBx.Text = LenToString(dL1, -3)
-      Axis2TxBx.Text = LenToString(dL2, -3)
-      Axis3TxBx.Text = LenToString(dL3, -3)
+      Axis1TxBx.Text = LenToString(dL1, -3, True)
+      Axis2TxBx.Text = LenToString(dL2, -3, True)
+      Axis3TxBx.Text = LenToString(dL3, -3, True)
       Axis4TxBx.Text = DoubleToString(dR1, -3)
       Axis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then Axis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayPositionDelta()
@@ -265,22 +265,32 @@ Public Class MachineStatusUC
       Dim dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10 As Double
       m_MainWindow.m_CNCommunication.GetAxesDeltas(dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10)
       ' Visualizzazione
-      DeltaAxis1TxBx.Text = LenToString(dL1, -3)
-      DeltaAxis2TxBx.Text = LenToString(dL2, -3)
-      DeltaAxis3TxBx.Text = LenToString(dL3, -3)
+      DeltaAxis1TxBx.Text = LenToString(dL1, -3, True)
+      DeltaAxis2TxBx.Text = LenToString(dL2, -3, True)
+      DeltaAxis3TxBx.Text = LenToString(dL3, -3, True)
       DeltaAxis4TxBx.Text = DoubleToString(dR1, -3)
       DeltaAxis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then DeltaAxis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayFeed()
       Dim dRealFeed As Double = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+      '' modifica richiesta 26/05/2023 da Rosario per cliente Lanzetta (lettura feed per CN Fanuc)
+      'If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+      '   dRealFeed = m_CN.d_DInterpo_Prog_Feed
+      'Else
+      '   dRealFeed = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+      'End If
+
+      ' modifica richiesta 24/03/2025 da Fabio per cliente Frigerio
+      dRealFeed = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+
       'Feed = DoubleToString(dRealFeed, 0)
-      FeedTxBx.Text = LenToString(dRealFeed, 0)
+      FeedTxBx.Text = LenToString(dRealFeed, 0, True)
       'FeedOverride = DoubleToString(m_CN.d_DInterpo_Feed_override, 0) & "%"
       Dim dFeedOverride As Double = m_CN.d_DInterpo_Feed_override
       FeedOverrideTxBx.Text = DoubleToString(dFeedOverride, 0) & "%"
@@ -302,8 +312,18 @@ Public Class MachineStatusUC
       Dim dSpindleOvr As Double
       ' se attivi nuovi comandi MDI su siemens
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
-         dSpindlePower = m_CN.d_data(0)
-         dSpindleOvr = m_CN.d_data(1)
+
+         If m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
+            dSpindlePower = m_CN.d_spindle_power
+            'dSpindleOvr = If(m_CN.bPowerOvr > 0, m_CN.d_spindle_power / m_CN.bPowerOvr * 100, 0)
+            dSpindleOvr = m_CN.bPowerOvr
+         Else
+            ' questo sistema è deprecabile dalla versione 2.6d2 (nuova gestione dei vettori)
+            dSpindlePower = m_CN.d_data(0)
+            dSpindleOvr = m_CN.d_data(1)
+         End If
+      ElseIf m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         dSpindlePower = m_CN.d_spindle_power / 1000
       Else
          dSpindlePower = m_CN.d_spindle_power
          dSpindleOvr = If(m_CN.bPowerOvr > 0, m_CN.d_spindle_power / m_CN.bPowerOvr * 100, 0)

Machine/MachiningDbPageUC.xaml.vb

@@ -61,7 +61,7 @@ Public Class MachiningDbPageUC
       StepType = {EgtMsg(MSG_COMBOBOXPARAM + 38), EgtMsg(MSG_COMBOBOXPARAM + 39), EgtMsg(MSG_COMBOBOXPARAM + 40)}
       RouFinStepType = {EgtMsg(MSG_COMBOBOXPARAM + 38), EgtMsg(MSG_COMBOBOXPARAM + 39)}
       ExtCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44), EgtMsg(MSG_COMBOBOXPARAM + 45)}
-      IntCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44)}
+      IntCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44), EgtMsg(90852)}
 
       ' Assegno array a combobox
       WorkSideCmBx.ItemsSource = WorkSide
@@ -208,7 +208,7 @@ Public Class MachiningDbPageUC
       MillTool.Clear()
       bFound = EgtTdbGetFirstTool(MCH_TF.MILL, sToolName, nType)
       While bFound
-         If nType = MCH_TY.MILL_STD Then MillTool.Add( sToolName)
+         If nType = MCH_TY.MILL_STD And sToolName.Trim.ToLower <> "probe" Then MillTool.Add(sToolName)
          bFound = EgtTdbGetNextTool(MCH_TF.MILL, sToolName, nType)
       End While
       PocketTool.Clear()

Machine/PolishingsPageUC.xaml.vb

@@ -61,8 +61,8 @@ Public Class PolishingsPageUC
       RepeatTxBl.Text = EgtMsg(91093)             ' Ripetizioni
       StepTxBl.Text = EgtMsg(90787)               ' Passo
       OffSetTxBl.Text = EgtMsg(91089)             ' Offset
-      RadiusTxBl.Text = "Raggio"
-      DistanceTxBl.Text = "Distanza"
+      RadiusTxBl.Text = EgtMsg(91139)             ' Raggio
+      DistanceTxBl.Text = EgtMsg(91140)           ' Distanza
       LiLoGpBx.Header = EgtMsg(91094)             ' Attacco/Uscita
       LiLenTxBl.Text = EgtMsg(91097)              ' Lunghezza
       LiHeightTxBl.Text = EgtMsg(91095)           ' Altezza

Machine/SetUpPage.xaml.vb

@@ -3,6 +3,8 @@ Imports System.ComponentModel
 Imports OmagCUT.TreeViewItem
 Imports EgtUILib
 Imports EgtWPFLib
+Imports EgtWPFLib5
+Imports FXServer
 
 Public Class SetUpPage
 
@@ -13,6 +15,7 @@ Public Class SetUpPage
    Private m_CurrMachine As CurrentMachine = m_MainWindow.m_CurrentMachine
 
    Private m_ToolTreeList As New ObservableCollection(Of CathegoryItem)
+   Private m_SawsList As CathegoryItem
    Private m_DrillbitsList As CathegoryItem
    Private m_MillsList As CathegoryItem
    Private m_CupsList As CathegoryItem
@@ -26,10 +29,10 @@ Public Class SetUpPage
       ' Assegno la lista utensili come sorgente dell'albero
       ToolTree.ItemsSource = m_ToolTreeList
 
-      If m_CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGER Then
+      If m_CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGER Or m_CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
          '' Cambio utensile macchina
          ' Modifico numero colonne della griglia in base al numero di porta utensili disponibili sulla macchina
-         Dim ColNum As Integer = CInt( Math.Ceiling( m_CurrMachine.ToolChangerNbr / 5.0))
+         Dim ColNum As Integer = CInt(Math.Ceiling(m_CurrMachine.ToolChangerNbr / 5.0))
          If ColNum > 12 Then
             EgtOutLog("TC warning : too many tools (max 12 * 5)")
             ColNum = 12
@@ -59,11 +62,11 @@ Public Class SetUpPage
 
       '' Cambio utensile manuale
       ' Modifico numero colonne della griglia in base al numero di porta utensili disponibili sulla macchina
-      Dim ManColNum As Integer = CInt( Math.Ceiling( m_CurrMachine.ManualToolChangerNbr / 5.0))
-         If ManColNum > 12 Then
-            EgtOutLog("ManTC warning : too many tools (max 12 * 5)")
-            ManColNum = 12
-         End If
+      Dim ManColNum As Integer = CInt(Math.Ceiling(m_CurrMachine.ManualToolChangerNbr / 5.0))
+      If ManColNum > 12 Then
+         EgtOutLog("ManTC warning : too many tools (max 12 * 5)")
+         ManColNum = 12
+      End If
       For Index As Integer = 12 To ManColNum + 1 Step -1
          For Index2 As Integer = Index * 5 To (Index - 1) * 5 + 1 Step -1
             ManTlChGrid.Children.Remove(GetManTlChPosFromIndex(Index2))
@@ -85,7 +88,7 @@ Public Class SetUpPage
       Next
 
       ' Se portautensili della macchina presente
-      If m_CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGER Then
+      If m_CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGER Or m_CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
          ' Apro quello
          TlChScVw.Visibility = Windows.Visibility.Visible
          ToolChangerBtn.IsChecked = True
@@ -106,15 +109,25 @@ Public Class SetUpPage
    Private Sub SetUpPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Inizializzo le famiglie di utensili nell'albero
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
-      InitializeToolGroup( m_CurrMachine.bDrill, MCH_TY.DRILL_STD, EgtMsg( 90752), m_DrillbitsList)
-      InitializeToolGroup( m_CurrMachine.bMill, MCH_TY.MILL_STD, EgtMsg( 90753), m_MillsList)
-      InitializeToolGroup( m_CurrMachine.bCupWheel, MCH_TY.MILL_NOTIP, EgtMsg( 90754), m_CupsList)
-      InitializeToolGroup( m_CurrMachine.bPolishingWheel, MCH_TY.MILL_POLISHING, EgtMsg( 90756), m_PolishingsList)
+      If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then InitializeToolGroup(m_CurrMachine.bSaw, MCH_TY.SAW_STD, EgtMsg(90751), m_SawsList)
+      InitializeToolGroup(m_CurrMachine.bDrill, MCH_TY.DRILL_STD, EgtMsg(90752), m_DrillbitsList)
+      InitializeToolGroup(m_CurrMachine.bMill, MCH_TY.MILL_STD, EgtMsg(90753), m_MillsList)
+      InitializeToolGroup(m_CurrMachine.bCupWheel, MCH_TY.MILL_NOTIP, EgtMsg(90754), m_CupsList)
+      InitializeToolGroup(m_CurrMachine.bPolishingWheel, MCH_TY.MILL_POLISHING, EgtMsg(90756), m_PolishingsList)
 
       ' Posiziono utensili già posizionati sul portautensili
       For Each ToolPosition As ToolChangerPos In m_CurrMachine.ToolChanger
          If ToolPosition.sTool <> String.Empty Then
-            If Not IsNothing( m_DrillbitsList) Then
+            If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW AndAlso Not IsNothing(m_SawsList) Then
+               For Each Item As CustomItem In m_SawsList.Items
+                  If Item.Name = ToolPosition.sTool Then
+                     m_SetUpToolsList.Items.Add(Item)
+                     m_SawsList.Items.Remove(Item)
+                     Exit For
+                  End If
+               Next
+            End If
+            If Not IsNothing(m_DrillbitsList) Then
                For Each Item As CustomItem In m_DrillbitsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -123,7 +136,7 @@ Public Class SetUpPage
                   End If
                Next
             End If
-            If Not IsNothing( m_MillsList) Then
+            If Not IsNothing(m_MillsList) Then
                For Each Item As CustomItem In m_MillsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -132,7 +145,7 @@ Public Class SetUpPage
                   End If
                Next
             End If
-            If Not IsNothing( m_CupsList) Then
+            If Not IsNothing(m_CupsList) Then
                For Each Item As CustomItem In m_CupsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -141,7 +154,7 @@ Public Class SetUpPage
                   End If
                Next
             End If
-            If Not IsNothing( m_PolishingsList) Then
+            If Not IsNothing(m_PolishingsList) Then
                For Each Item As CustomItem In m_PolishingsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -158,7 +171,7 @@ Public Class SetUpPage
       ' Posiziono utensili già posizionati sul portautensili manuale
       For Each ToolPosition As ToolChangerPos In m_CurrMachine.ManualToolChanger
          If ToolPosition.sTool <> String.Empty Then
-            If Not IsNothing( m_DrillbitsList) Then
+            If Not IsNothing(m_DrillbitsList) Then
                For Each Item As CustomItem In m_DrillbitsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -167,7 +180,7 @@ Public Class SetUpPage
                   End If
                Next
             End If
-            If Not IsNothing( m_MillsList) Then
+            If Not IsNothing(m_MillsList) Then
                For Each Item As CustomItem In m_MillsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -176,7 +189,7 @@ Public Class SetUpPage
                   End If
                Next
             End If
-            If Not IsNothing( m_CupsList) Then
+            If Not IsNothing(m_CupsList) Then
                For Each Item As CustomItem In m_CupsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -185,7 +198,7 @@ Public Class SetUpPage
                   End If
                Next
             End If
-            If Not IsNothing( m_PolishingsList) Then
+            If Not IsNothing(m_PolishingsList) Then
                For Each Item As CustomItem In m_PolishingsList.Items
                   If Item.Name = ToolPosition.sTool Then
                      m_SetUpToolsList.Items.Add(Item)
@@ -710,16 +723,16 @@ Public Class SetUpPage
    End Function
 
    ' Funzione che carica gli utensili del Db nell'albero
-   Friend Sub InitializeToolGroup( bEnabled As Boolean, nTType As Integer, sFName As String, ByRef ToolCathegory As CathegoryItem)
+   Friend Sub InitializeToolGroup(bEnabled As Boolean, nTType As Integer, sFName As String, ByRef ToolCathegory As CathegoryItem)
       If Not bEnabled Then Return
       ' Inserisco categoria ed eventuali elementi
-      ToolCathegory = New CathegoryItem( sFName, nTType)
+      ToolCathegory = New CathegoryItem(sFName, nTType)
       Dim nType As Integer = 0
       Dim ToolName As String = String.Empty
-      Dim bFound As Boolean = EgtTdbGetFirstTool( nTType, ToolName, nType)
+      Dim bFound As Boolean = EgtTdbGetFirstTool(nTType, ToolName, nType)
       While bFound
-         If nType = nTType Then ToolCathegory.Items.Add( New CustomItem( ToolName, nType))
-         bFound = EgtTdbGetNextTool( nTType, ToolName, nType)
+         If nType = nTType Then ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+         bFound = EgtTdbGetNextTool(nTType, ToolName, nType)
       End While
       m_ToolTreeList.Add(ToolCathegory)
    End Sub
@@ -761,7 +774,7 @@ Public Class SetUpPage
             ToolHolderClicked.Tool.IsChecked = False
             GetTxBxFromTlChPos(ToolHolderClicked.Name).Text = String.Empty
          End If
-      ' altrimenti da levare
+         ' altrimenti da levare
       Else
          RestoreToolInList(GetTxBxFromTlChPos(ToolHolderClicked.Name).Text)
          GetTxBxFromTlChPos(ToolHolderClicked.Name).Text = String.Empty
@@ -771,14 +784,17 @@ Public Class SetUpPage
 
    ' Funzione che rimuove l'utensile selezionato dall'albero
    Private Sub RemoveToolFromList()
-      If Not IsNothing( m_DrillbitsList) AndAlso m_DrillbitsList.Items.Contains( ToolTree.SelectedItem) Then
-         m_DrillbitsList.Items.Remove( ToolTree.SelectedItem)
-      ElseIf Not IsNothing( m_MillsList) AndAlso  m_MillsList.Items.Contains( ToolTree.SelectedItem) Then
-         m_MillsList.Items.Remove( ToolTree.SelectedItem)
-      ElseIf Not IsNothing( m_CupsList) AndAlso  m_CupsList.Items.Contains( ToolTree.SelectedItem) Then
-         m_CupsList.Items.Remove( ToolTree.SelectedItem)
-      ElseIf Not IsNothing( m_PolishingsList) AndAlso  m_PolishingsList.Items.Contains( ToolTree.SelectedItem) Then
-         m_PolishingsList.Items.Remove( ToolTree.SelectedItem)
+      If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW AndAlso
+         Not IsNothing(m_SawsList) AndAlso m_SawsList.Items.Contains(ToolTree.SelectedItem) Then
+         m_SawsList.Items.Remove(ToolTree.SelectedItem)
+      ElseIf Not IsNothing(m_DrillbitsList) AndAlso m_DrillbitsList.Items.Contains(ToolTree.SelectedItem) Then
+         m_DrillbitsList.Items.Remove(ToolTree.SelectedItem)
+      ElseIf Not IsNothing(m_MillsList) AndAlso m_MillsList.Items.Contains(ToolTree.SelectedItem) Then
+         m_MillsList.Items.Remove(ToolTree.SelectedItem)
+      ElseIf Not IsNothing(m_CupsList) AndAlso m_CupsList.Items.Contains(ToolTree.SelectedItem) Then
+         m_CupsList.Items.Remove(ToolTree.SelectedItem)
+      ElseIf Not IsNothing(m_PolishingsList) AndAlso m_PolishingsList.Items.Contains(ToolTree.SelectedItem) Then
+         m_PolishingsList.Items.Remove(ToolTree.SelectedItem)
       End If
    End Sub
 
@@ -786,7 +802,9 @@ Public Class SetUpPage
    Private Sub RestoreToolInList(sToolName As String)
       For Each Tool As CustomItem In m_SetUpToolsList.Items
          If Tool.Name = sToolName Then
-            If Tool.nType = MCH_TY.DRILL_STD Then
+            If Tool.nType = MCH_TY.SAW_STD Then
+               m_SawsList.Items.Add(Tool)
+            ElseIf Tool.nType = MCH_TY.DRILL_STD Then
                m_DrillbitsList.Items.Add(Tool)
             ElseIf Tool.nType = MCH_TY.MILL_STD Then
                m_MillsList.Items.Add(Tool)
@@ -1084,6 +1102,39 @@ Public Class SetUpPage
       EgtTdbSave()
    End Sub
 
+   ' Funzione che genera il file di setup corrente (per Cam5 e Office)
+   Private Sub SaveSetUpFile()
+      If m_CurrMachine.MountedToolConfig <> CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then Return
+      Dim sContentFile As String = "; this file has been created by program OmagCUT by current setup" & vbCrLf
+      sContentFile &= "[General]" & vbCrLf
+      For Each ToolPosition As ToolChangerPos In m_CurrMachine.ToolChanger
+         Dim sToolName As String = ToolPosition.sTool
+         Dim sPositionName As String = ToolPosition.sName
+         Dim sPosition As Integer = ToolPosition.nPosition
+         If Not String.IsNullOrEmpty(sToolName) Then
+            EgtTdbSetCurrTool(sToolName)
+            ' Recupero l'uscita
+            Dim nExit As Integer = 1
+            EgtTdbGetCurrToolParam(MCH_TP.EXIT_, nExit)
+            ' Recupero la testa
+            Dim sHead As String = ""
+            EgtTdbGetCurrToolParam(MCH_TP.HEAD, sHead)
+            ' Recupero nome file nge dell'utensile
+            Dim sUUID As String = ""
+            EgtTdbGetCurrToolParam(MCH_TP.UUID, sUUID)
+            'local sRaw='Pos'..tostring(Index)..'='..TcPos..';'..EgtTdbGetCurrToolParam( MCH_TP.HEAD)..';'..EgtTdbGetCurrToolParam( MCH_TP.EXIT)..'/'..EgtTdbGetCurrToolParam( MCH_TP.UUID)..'/'..ToolName
+            sContentFile &= "Pos" & sPosition.ToString & "=" & sPositionName & ";" & sHead & ";" & nExit.ToString & "/" & sUUID & "/" & sToolName & vbCrLf
+         End If
+      Next
+      ' Apro il file e lo sovrascrivo
+      Dim sFileOmagCutSetUp As String = m_CurrMachine.sMachDir & "\SetUp\CurrOmagCUT.stu"
+      Try
+         My.Computer.FileSystem.WriteAllText(sFileOmagCutSetUp, sContentFile, False)
+      Catch ex As Exception
+         EgtOutLog("Error in creatinf file CurrOmagCUT.stu: " & ex.ToString)
+      End Try
+   End Sub
+
    ' Evento che permette di aprire le cartelle degli utensili con un click singolo
    Private Sub ToolTree_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles ToolTree.PreviewMouseUp
       If TypeOf ToolTree.SelectedItem Is CathegoryItem Then
@@ -1095,6 +1146,8 @@ Public Class SetUpPage
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       ' Eseguo salvataggio (DB utensili + attrezzaggio)
       SaveToolChangerStatus()
+      ' Salvo nel file di setup l'attuale configurazione
+      SaveSetUpFile()
       ' Esco
       m_MainWindow.m_MachinePageUC.MachinePageGrid.Children.Add(m_MainWindow.m_MachinePageUC.m_AlarmsPageUC)
       m_MainWindow.m_MachinePageUC.MachinePageGrid.Children.Remove(Me)
@@ -1131,7 +1184,7 @@ Public Class SetUpPage
                   RemoveToolFromList()
                Else
                   ' Altrimenti segnalo che la posizione è già occupata
-                  Dim InfoMsgBox As New EgtMsgBox(m_MainWindow, "", EgtMsg( 90759), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.ESCLAMATION)
+                  Dim InfoMsgBox As New EgtMsgBox(m_MainWindow, "", EgtMsg(90759), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.ESCLAMATION)
                End If
                Return
             End If
@@ -1149,7 +1202,7 @@ Public Class SetUpPage
                   RemoveToolFromList()
                Else
                   ' Altrimenti segnalo che la posizione è già occupata
-                  Dim InfoMsgBox As New EgtMsgBox(m_MainWindow, "", EgtMsg( 90759), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.ESCLAMATION)
+                  Dim InfoMsgBox As New EgtMsgBox(m_MainWindow, "", EgtMsg(90759), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.ESCLAMATION)
                End If
                Return
             End If

Machine/ToolChangerPosUC.xaml

@@ -9,7 +9,7 @@
    <!-- Definizione del ToolHolderUc -->
    <Grid>
       <Image Source="/Resources/ToolChangerPos.png"/>
-      <ToggleButton Name="Tool" Width="50" Height="50" Margin="22,40,26,8" Background="#7FB4B4B4">
+      <ToggleButton Name="Tool" Width="50" Height="50" Margin="62,10,16,10" Background="#7FB4B4B4">
          <ToggleButton.Template>
             <ControlTemplate TargetType="{x:Type ToggleButton}">
                <Grid>
@@ -18,14 +18,14 @@
                </Grid>
                <ControlTemplate.Triggers>
                   <Trigger Property="IsChecked" Value="True">
-                     <Setter Property="Fill" TargetName="Ellipse" Value="#FFB4B4B4"/>
+                     <Setter Property="Fill" TargetName="Ellipse" Value="#414141"/>
                   </Trigger>
                </ControlTemplate.Triggers>
             </ControlTemplate>
 
          </ToggleButton.Template>
       </ToggleButton>
-      <TextBlock Name="PositionNameTxBl" Height="22" Width="68" FontSize="16" Margin="12,16,41,61"/>
+      <TextBlock Name="PositionNameTxBl" Height="22" Width="50" FontSize="16" Margin="20,40,70,53"/>
 
    </Grid>
 </UserControl>

Machine/ToolsDbPageUC.xaml

@@ -1,12 +1,12 @@
 <UserControl x:Class="ToolsDbPageUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
-   xmlns:self="clr-namespace:OmagCUT.TreeViewItem"
-   mc:Ignorable="d" 
-   d:DesignHeight="768" d:DesignWidth="1280" Initialized="ToolsDbPage_Initialized" Loaded="ToolsDbPage_Loaded">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+             xmlns:self="clr-namespace:OmagCUT.TreeViewItem"
+             mc:Ignorable="d" 
+             d:DesignHeight="768" d:DesignWidth="1280" Initialized="ToolsDbPage_Initialized" Loaded="ToolsDbPage_Loaded">
 
    <!-- Definizione della ImportPage -->
    <Border Style="{DynamicResource OmagCut_PageBorder}">
@@ -24,7 +24,7 @@
 
          <TreeView Name="ToolTreeView" Background="{DynamicResource OmagCut_TreeViewBackGroundColor}" >
             <TreeView.Resources>
-                    <!--Modifico HierarchicalDataTemplate del CathegoryItem per poter inserire immagine e testo e per -->
+               <!--Modifico HierarchicalDataTemplate del CathegoryItem per poter inserire immagine e testo e per -->
                <!--renderlo apribile con un solo click -->
                <HierarchicalDataTemplate DataType="{x:Type self:CathegoryItem}" ItemsSource="{Binding Items}">
 
@@ -224,12 +224,12 @@
             </Grid.RowDefinitions>
 
             <TextBlock Name="NameTxBl" Grid.Column="0" Grid.Row="0" Grid.RowSpan="3"
-               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
             <EgtWPFLib:EgtTextBox Name="NameTxBx" Grid.Column="1" Grid.Row="0" Grid.RowSpan="3"
-               Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}"/>
+                                  Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}"/>
 
             <Border Name="TCPosBrd" Grid.Column="2" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="3"
-               BorderThickness="0" BorderBrush="Black" CornerRadius="3">
+                    BorderThickness="0" BorderBrush="Black" CornerRadius="3">
 
                <Grid>
                   <Grid.ColumnDefinitions>
@@ -237,17 +237,27 @@
                      <ColumnDefinition Width="2*"/>
                   </Grid.ColumnDefinitions>
 
-                  <TextBlock Name="TCPosTxBl" Grid.Column="0"
-                     Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                  <TextBlock Name="TCPosTxBl" Grid.Column="0">
+                     <TextBlock.Style>
+                        <Style TargetType="{x:Type TextBlock}" BasedOn="{StaticResource OmagCut_LowerCaseCharacterTextBlock}">
+                           <Setter Property="Margin" Value="10,0,0,0"/>
+                           <Style.Triggers>
+                              <Trigger Property="ToolTip" Value="">
+                                 <Setter Property="ToolTipService.IsEnabled" Value="False" />
+                              </Trigger>
+                           </Style.Triggers>
+                        </Style>
+                     </TextBlock.Style>
+                  </TextBlock>
                   <EgtWPFLib:EgtTextBox Name="TCPosTxBx" Grid.Column="1" Grid.Row="0" Margin="0,0,15,0"
-                     Style="{DynamicResource OmagCut_KeyboardTextBox}" />
+                                        Style="{DynamicResource OmagCut_KeyboardTextBox}" />
 
                </Grid>
 
             </Border>
 
             <Border Name="HeadExitBrd" Grid.Column="0" Grid.Row="3" Grid.ColumnSpan="4" Grid.RowSpan="3"
-               Style="{DynamicResource OmagCut_NoNameGroupBorder}">
+                    Style="{DynamicResource OmagCut_NoNameGroupBorder}">
 
                <Grid>
                   <Grid.ColumnDefinitions>
@@ -259,18 +269,18 @@
 
                   <TextBlock Name="HeadTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="HeadTxBx" Grid.Column="1"
-                     Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}" />
+                                        Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}" />
 
                   <TextBlock Name="ExitTxBl" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="ExitTxBx" Grid.Column="3"
-                     Style="{DynamicResource OmagCut_RightCalculatorTextBoxInBorder}" />
+                                        Style="{DynamicResource OmagCut_RightCalculatorTextBoxInBorder}" />
 
                </Grid>
 
             </Border>
 
             <GroupBox Name="SpeedGpBx" Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="4" Grid.RowSpan="4"
-               Style="{DynamicResource OmagCut_GroupBox}">
+                      Style="{DynamicResource OmagCut_GroupBox}">
 
                <Grid>
                   <Grid.ColumnDefinitions>
@@ -282,19 +292,19 @@
 
                   <TextBlock Name="SpeedTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1" IsLength="False"
-                     Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
+                                        Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                   <TextBlock Name="MaxSpeedTxBl" Grid.Column="2"
-                     Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="MaxSpeedTxBx" Grid.Column="3" IsLength="False"
-                     Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
+                                        Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                </Grid>
 
             </GroupBox>
 
             <GroupBox Name="FeedGpBx" Grid.Column="0" Grid.Row="10" Grid.ColumnSpan="4" Grid.RowSpan="6"
-               Style="{DynamicResource OmagCut_GroupBox}">
+                      Style="{DynamicResource OmagCut_GroupBox}">
 
                <Grid>
                   <Grid.ColumnDefinitions>
@@ -309,23 +319,23 @@
                   </Grid.RowDefinitions>
 
                   <TextBlock Name="FeedTxBl" Grid.Column="0" Grid.Row="0"
-                     Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="FeedTxBx" Grid.Column="1" Grid.Row="0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
+                                        Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                   <TextBlock Name="TipFeedTxBl" Grid.Column="2" Grid.Row="0"
-                     Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="TipFeedTxBx" Grid.Column="3" Grid.Row="0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
+                                        Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                   <TextBlock Name="StartFeedTxBl" Grid.Column="0" Grid.Row="1"
-                     Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="StartFeedTxBx" Grid.Column="1" Grid.Row="1"
-                     Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
+                                        Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
                   <TextBlock Name="EndFeedTxBl" Grid.Column="2" Grid.Row="1"
-                     Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                   <EgtWPFLib:EgtTextBox Name="EndFeedTxBx" Grid.Column="3" Grid.Row="1"
-                     Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
+                                        Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                </Grid>
 
@@ -336,7 +346,7 @@
             <ComboBox Name="CoolantCmBx" Grid.Column="1" Grid.Row="16" Grid.RowSpan="3" Style="{StaticResource OmagCut_LeftComboBoxNoBorder}">
                <ComboBox.ItemTemplate>
                   <DataTemplate>
-                            <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                     <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
                   </DataTemplate>
                </ComboBox.ItemTemplate>
             </ComboBox>
@@ -420,11 +430,32 @@
             <CheckBox Name="EndLifeChBx" Grid.Column="3" Grid.Row="31" Grid.RowSpan="3"
                 Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,8,0,0"/>
 
-            <TextBlock Name="UserNotesTxBl" Grid.Column="0" Grid.Row="33" Grid.RowSpan="3"
-               Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="UserNotesTxBx" Grid.Column="1" Grid.Row="33"
-               Grid.RowSpan="3"  Grid.ColumnSpan="3" Margin="0,0,15,0" 
-               Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+            <Grid Grid.Column="0" Grid.Row="33" Grid.RowSpan="3" Grid.ColumnSpan="4">
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="1*"/>
+               </Grid.RowDefinitions>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="Auto"/>
+               </Grid.ColumnDefinitions>
+                    <StackPanel Orientation="Horizontal" HorizontalAlignment="Left">
+                  <TextBlock Name="UserNotesTxBl"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                  <EgtWPFLib:EgtTextBox Name="UserNotesTxBx"
+                                        Grid.RowSpan="3"  Grid.ColumnSpan="3" Margin="0,0,15,0" 
+                                        Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
+               </StackPanel>
+               <StackPanel Grid.Column="1" Orientation="Horizontal" HorizontalAlignment="Right" Margin="0,0,12,0">
+                  <TextBlock Name="ColorTxBl" Margin="0,0,15,0"
+                             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+
+                  <Button Name="ColorBtn"
+                          Style="{StaticResource Color_Button}" />
+
+               </StackPanel>
+            </Grid>
+
+
 
          </Grid>
 
@@ -445,7 +476,7 @@
             <Button Name="ExportBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
             <Button Name="ImportBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
 
-            </Grid>
+         </Grid>
 
       </Grid>
 

Machine/ToolsDbPageUC.xaml.vb

@@ -1,6 +1,5 @@
 Imports System.Collections.ObjectModel
 Imports OmagCUT.TreeViewItem
-Imports System.ComponentModel
 Imports EgtUILib
 Imports EgtWPFLib
 Imports EgtWPFLib5
@@ -84,6 +83,7 @@ Public Class ToolsDbPageUC
       CodeTxBl.Text = EgtMsg(MSG_TOOLSDBPAGEUC + 27)         ' Code
       SupplierTxBl.Text = EgtMsg(MSG_TOOLSDBPAGEUC + 28)     ' Supplier 
       EndLifeTxBl.Text = EgtMsg(MSG_TOOLSDBPAGEUC + 29)      ' End Life
+      ColorTxBl.Text = EgtMsg(91018)                         ' Colore lavorazione
 
       ' Associo TextBox e Label
       Dim TempLabel1 As New Label
@@ -122,7 +122,6 @@ Public Class ToolsDbPageUC
       Dim TempLabel12 As New Label
       TempLabel12.Content = MaxMatTxBl.Text
       MaxMatTxBx.Tag = TempLabel12
-
    End Sub
 
    Private Sub ToolsDbPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -568,6 +567,15 @@ Public Class ToolsDbPageUC
       End If
    End Sub
 
+   Private Sub ColorBtn_Click(sender As Object, e As RoutedEventArgs) Handles ColorBtn.Click
+      ' Il click sul bottone aprirà la finestra ChooseColor che permetterà la scelta del colore
+      m_MainWindow.m_brCurrentColor = ColorBtn.Background
+      Dim ChooseColor As New ChooseColor(m_MainWindow)
+      If ChooseColor.ShowDialog() Then
+         ColorBtn.Background = m_MainWindow.m_brCurrentColor
+      End If
+   End Sub
+
    Private Function AlreadyExist(ToolName As String) As Boolean
       Dim ToolFamily As CathegoryItem
       For Each ToolFamily In ToolsList
@@ -695,7 +703,16 @@ Public Class ToolsDbPageUC
       Dim ToolName As String = String.Empty
       Dim bFound As Boolean = EgtTdbGetFirstTool(nTType, ToolName, nType)
       While bFound
-         If nType = nTType Then ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+         Dim nDebug As Integer = GetPrivateProfileInt(S_GENERAL, K_DEBUG, 0, m_sIniFile)
+         If nType = nTType Then
+            If nTType <> MCH_TY.MILL_STD Then
+               ' se utensile diverso da MILL
+               ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+            ElseIf nTType = MCH_TY.MILL_STD And (ToolName.Trim.ToLower <> "probe" Or nDebug > 4) Then
+               ' Se utensile MILL con nome "probe" aggiungo solo se livello debug maggiore di 4
+               ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+            End If
+         End If
          bFound = EgtTdbGetNextTool(nTType, ToolName, nType)
       End While
       ToolsList.Add(ToolCathegory)
@@ -757,6 +774,50 @@ Public Class ToolsDbPageUC
          EgtTdbGetCurrToolParam(MCH_TP.USERNOTES, ToolString)
          UserNotesTxBx.Text = ToolString
       End If
+      ' Inizializzo colore di default
+      Dim EgtCol As Color3d = Utility.GetColorPV()
+      ColorBtn.Background = New SolidColorBrush(Color.FromRgb(EgtCol.R, EgtCol.G, EgtCol.B))
+      ' Eventualmente verifico se inserito nel setup
+      VerifyToolInSetUp(m_sToolName, TCPosTxBx.Text)
+   End Sub
+
+   Private Sub VerifyToolInSetUp(sNameTool As String, sTCPos As String)
+      ' Se configurato cambio utensile lama 
+      If m_MainWindow.m_CurrentMachine.MountedToolConfig <> CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then Return
+      Dim bFound As Boolean = False
+      Dim sCurrTCPos As String = String.Empty
+      For Each ToolPosition As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+         If ToolPosition.sTool <> String.Empty Then
+            If sNameTool = ToolPosition.sTool Then
+               sCurrTCPos = ToolPosition.sName
+               bFound = True
+               Exit For
+            End If
+         End If
+      Next
+
+      If Not bFound Then
+         TCPosTxBl.Foreground = Brushes.Red
+         If String.IsNullOrEmpty(sTCPos) Then
+            TCPosTxBl.ToolTip = EgtMsg(91019)
+         Else
+            TCPosTxBl.ToolTip = EgtMsg(91020)
+         End If
+      Else
+         If String.IsNullOrEmpty(sTCPos) Then
+            TCPosTxBl.Foreground = Brushes.Gold
+            TCPosTxBl.ToolTip = EgtMsg(91021) & " " & sCurrTCPos
+         Else
+            If sTCPos <> sCurrTCPos Then
+               TCPosTxBl.Foreground = Brushes.Gold
+               TCPosTxBl.ToolTip = EgtMsg(91022) & " " & sCurrTCPos
+            Else
+               TCPosTxBl.Foreground = Brushes.White
+               TCPosTxBl.ToolTip = ""
+            End If
+         End If
+      End If
+
    End Sub
 
    Private Sub SetToolParams()
@@ -812,8 +873,40 @@ Public Class ToolsDbPageUC
       If Not SetSpecials() Then
          EgtTdbSetCurrToolParam(MCH_TP.USERNOTES, UserNotesTxBx.Text)
       End If
+      EgtTdbSetCurrToolValInNotes(MCH_TP.SYSNOTES, "COLOR", ColorToString(ColorBtn.Background.ToString()))
    End Sub
 
+   Private Function ColorToString(color As String) As String
+      Dim colorCut As Color = HexToRbgNew(color)
+      Return colorCut.R & "," & colorCut.G & "," & colorCut.B
+   End Function
+
+   Public Function HexToRbgNew(ByVal Hex As String) As Color
+      If Hex.StartsWith("#") Then
+         Hex = Hex.Remove(0, 3)
+      End If
+      Dim red As Byte = CByte(HexadecimalToDecimal(Hex.Substring(0, 2)))
+      Dim green As Byte = CByte(HexadecimalToDecimal(Hex.Substring(2, 2)))
+      Dim blue As Byte = CByte(HexadecimalToDecimal(Hex.Substring(4, 2)))
+      Return Color.FromArgb(255, red, green, blue)
+   End Function
+
+   Private Shared Function HexadecimalToDecimal(hex As String) As Integer
+      hex = hex.ToUpper()
+      Dim hexLength As Integer = hex.Length
+      Dim dec As Double = 0
+      For i As Integer = 0 To hexLength - 1
+         Dim b As Byte = CByte(AscW(hex(i)))
+         If b >= 48 AndAlso b <= 57 Then
+            b -= 48
+         ElseIf b >= 65 AndAlso b <= 70 Then
+            b -= 55
+         End If
+         dec += b * Math.Pow(16, ((hexLength - i) - 1))
+      Next
+      Return CInt(Math.Truncate(dec))
+   End Function
+
    Private Sub ViewToolParams()
       NameTxBl.Visibility = Windows.Visibility.Visible
       NameTxBx.Visibility = Windows.Visibility.Visible
@@ -854,6 +947,9 @@ Public Class ToolsDbPageUC
       SupplierTxBx.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       EndLifeTxBl.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       EndLifeChBx.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+
+      ColorTxBl.Visibility = If(m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW, Visibility.Visible, Visibility.Hidden)
+      ColorBtn.Visibility = If(m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW, Visibility.Visible, Visibility.Hidden)
    End Sub
 
    Private Sub HideToolParams()
@@ -881,6 +977,9 @@ Public Class ToolsDbPageUC
       SupplierTxBx.Visibility = Windows.Visibility.Hidden
       EndLifeTxBl.Visibility = Windows.Visibility.Hidden
       EndLifeChBx.Visibility = Windows.Visibility.Hidden
+
+      ColorTxBl.Visibility = Visibility.Hidden
+      ColorBtn.Visibility = Visibility.Hidden
    End Sub
 
    Private Sub ToolTreeView_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles ToolTreeView.PreviewMouseUp
@@ -1329,4 +1428,8 @@ Public Class ToolsDbPageUC
       End If
    End Sub
 
+   Private Sub TCPosTxBx_EgtClosed(sender As Object, e As EventArgs) Handles TCPosTxBx.EgtClosed
+      VerifyToolInSetUp(m_sToolName, TCPosTxBx.Text)
+   End Sub
+
 End Class

MainWindow.xaml

@@ -27,7 +27,7 @@
          </Grid.ColumnDefinitions>
 
          <Border Name="LogoBrd" Background="Transparent">
-                <Image Source="{DynamicResource LogoOmagImg}" Stretch="Uniform" Margin="1"/>
+                <Image Source="../Resources/NewIcons/logo-OmCut.png" Stretch="Uniform" Margin="1"/>
          </Border>
 
          <!-- ** Definizione della Grid delle tab ** -->
@@ -53,7 +53,7 @@
             </ToggleButton>
          </Grid>
 
-         <Button Grid.Column="2" Style="{DynamicResource OmagCut_BlueIconButton}" Click="ExitBtn_Click">
+         <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_BlueIconButton}" Click="ExitBtn_Click">
             <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
    

MainWindow.xaml.vb

@@ -23,6 +23,11 @@ Class MainWindow
    ' Coefficiente di scalatura della finestra rispetto a standard
    Friend m_dMWinScale As Double = 1
 
+   ' Variabile che definisce l'avvio forzato in modalità FRAME
+   Friend m_OnlyFrame As Boolean = False
+
+   Public Shared m_bShowSVGParkInd As Boolean = False
+
    ' Dichiarazione delle Page UserControl
    Friend m_WorkInProgressPageUC As WorkInProgressPageUC
    Friend m_CurrentProjectPageUC As CurrentProjectPageUC
@@ -38,6 +43,8 @@ Class MainWindow
    Friend m_MachinePageUC As MachinePageUC
    Friend m_OptionsPageUC As OptionsPageUC
 
+   Friend m_IsClosingApplication As Integer = 0
+
    ' Dichiarazione variabili direttori
    Private m_sExeRoot As String = String.Empty
    Private m_sDataRoot As String = String.Empty
@@ -98,6 +105,8 @@ Class MainWindow
       OFFICE_TYPE = 2 ^ 19                '  524288
       REGISTRATION = 2 ^ 20               ' 1048576
       SIMPLESTATISTICS = 2 ^ 21           ' 2097152
+      COMPOFRAME = 2 ^ 22                 ' 4194304
+      CUT_LIGHT = 2 ^ 23                  ' 8388608
    End Enum
    ' Opzione nesting automatico
    Private m_bAutoNest As Boolean = False
@@ -321,15 +330,30 @@ Class MainWindow
       Dim sNestKey As String = ""
       EgtUILib.GetPrivateProfileString(S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
       EgtSetNestKey(sNestKey)
-      Dim bNetHwKey As Boolean = ( GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
-      EgtSetNetHwKey( bNetHwKey)
+      Dim bNetHwKey As Boolean = (GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
+      EgtSetNetHwKey(bNetHwKey)
+
+      ' Impostazioni per chiave di rete
+      Dim bNetKey As Boolean = (GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
+      EgtSetNetHwKey(bNetKey)
+      Dim sLockId As String = ""
+      EgtUILib.GetPrivateProfileString(S_LICENCE, K_LOCKID, "", sLockId, sLicFile)
+      If Not String.IsNullOrEmpty(sLockId) Then
+         EgtSetLockId(sLockId)
+      End If
+
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2501, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2501, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2705, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2705, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
+      ' Impostazione per programma OnlyFrame: solo se CUT_BASE non attivo
+      If Not bProd Then
+         m_OnlyFrame = GetKeyOption(KEY_OPT.CUT_LIGHT)
+      End If
+
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetPrivateProfileInt(S_GENERAL, K_DEBUG, 0, m_sIniFile)
       m_sVersion = My.Application.Info.Version.Major.ToString() & "." &
@@ -437,8 +461,9 @@ Class MainWindow
 
       ' abilito il bottone per la gestione del comando di Check-Up-Start (posziona lama prelavorazione)
       If GetPrivateProfileInt(S_GENERAL, "Test", "0", m_sIniFile) = 0 OrElse
-         Not File.Exists( m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
+         Not File.Exists(m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
          m_CadCutPageUC.m_ProjectMgr.TestBtn.Visibility = Visibility.Collapsed
+         EgtOutLog("Warning: Missing file 'TestWork.lua' in folder 'DirectCmd', buttun 'TEST' collapsed!")
       Else
          m_CadCutPageUC.m_ProjectMgr.TestBtn.Visibility = Visibility.Visible
       End If
@@ -551,14 +576,14 @@ Class MainWindow
 
                ' è permessa una sola istanza alla volta del programma OmagCUT -> "(1)" : "(" & nIstance.ToString & ")"
                EgtPHOTOLib.MainData.SetUser(Environment.MachineName & "\" & Environment.UserName & " (1)")
-                  Dim sIdKey As String = String.Empty
-                  EgtGetKeyInfo(sIdKey)
-                  EgtPHOTOLib.MainData.SetKey(sIdKey)
-               End If
+               Dim sIdKey As String = String.Empty
+               EgtGetKeyInfo(sIdKey)
+               EgtPHOTOLib.MainData.SetKey(sIdKey)
             End If
+         End If
       End If
       ' --------------------------------- SLAB DB -------------------------------------------------------
-
+      ExitBtn.ToolTip = "Exit" & vbCrLf & "Minimize (Shift)"
    End Sub
 
    Private Sub ManageSingleIstance()
@@ -631,6 +656,41 @@ Class MainWindow
       m_IdleTimer.Interval = TimeSpan.FromMilliseconds(100)
       m_IdleTimer.Start()
 
+      Dim sAssStatus As String = " discontinued"
+      Dim nAssLeftDays As Integer
+      ' MESSAGGIO...
+      If EgtGetKeyAssLeftDays(nAssLeftDays) And nAssLeftDays >= 0 Then
+         If nAssLeftDays > 0 Then
+            sAssStatus = "expires within " & nAssLeftDays.ToString() & " days"
+            'sAssStatus = "to be renewed within " & nAssLeftDays.ToString() & " days"
+         Else
+            sAssStatus = "Expired"
+         End If
+      End If
+
+      Dim bShowInfoAssistance As Boolean = True
+      bShowInfoAssistance = (GetPrivateProfileInt(S_GENERAL, K_SHOWEXPIREASSITANCE, "1", GetIniFile) <> 0)
+      ' Or nAssLeftDays = 358
+      If bShowInfoAssistance And ((nAssLeftDays <= 7 And nAssLeftDays >= 0) Or nAssLeftDays = 14 Or nAssLeftDays = 21 Or nAssLeftDays = 28) Then
+         ' 91145=Avviso importante
+         Dim sMsg_Title As String = EgtMsg(91145)
+         ' 91146=Il contratto di aggiornamento della licenza in uso scadrà tra {0} giorni./n
+         Dim sMsg_AssStatus As String = String.Format(EgtMsg(91146), nAssLeftDays.ToString())
+         ' 91147=Se desiderate rimanere aggiornati e continuare ad usufruire dei benefici del servizio, vi invitiamo a contattare la nostra assistenza al seguente indirizzo:/n
+         Dim sMsg_RefAssistance As String = EgtMsg(91147)
+         Dim sAssistance As String = String.Empty
+         GetPrivateProfileString(S_GENERAL, "Assistances", "", sAssistance, GetIniFile)
+         Dim sItems As String() = sAssistance.Split(","c)
+         For Each Item As String In sItems
+            sMsg_RefAssistance &= " → " & Item.Trim & " /n"
+         Next
+         ' 91148=Grazie per la vostra collaborazione.
+         Dim sMsg_ThankYou As String = EgtMsg(91148)
+         Dim MyLicWn As New LicenseWindow(Me, sMsg_AssStatus & sMsg_RefAssistance & sMsg_ThankYou, sMsg_Title)
+         MyLicWn.WindowStartupLocation = WindowStartupLocation.CenterOwner
+         MyLicWn.Show()
+      End If
+
       ' inizilizzo
    End Sub
 
@@ -995,6 +1055,16 @@ Class MainWindow
       ' Se già visualizzato errore, lo nascondo
       If m_CurrentProjectPageUC.OutMessageBrd.IsMouseOver Then
          m_CurrentProjectPageUC.ClearMessage()
+         ' se è premuto il pulsante Shift allora provvedo ad aprire il file di Log
+         If Keyboard.Modifiers And ModifierKeys.Shift Then
+            ' Genero file CNC (lancio anche se errore in precedenza)
+            Dim sTemoDirect As String = GetTempDir() & "\OmagCUTLog.txt"
+            Try
+               Process.Start("Notepad.exe", sTemoDirect)
+            Catch ex As Exception
+               EgtOutLog(ex.ToString)
+            End Try
+         End If
       End If
       ' Condizioni che impediscono di clickare fuori dalla calcolatrice o tastiera quando una di queste è aperta
       If EgtWPFLib.EgtCalculator.GetbIsActive Then
@@ -1085,6 +1155,19 @@ Class MainWindow
          m_CurrentProjectPageUC.SaveNamedProject()
          m_CurrentProjectPageUC.SaveProject()
       End If
+      ' Inizio la chiusura del programma (se NUM_OLD verifico di aver terminato il processo DripFeed)
+      EgtOutLog("Iniziato processo di chiusura programma")
+      m_IsClosingApplication = If(m_CNCommunication.m_nNCType = 1, 1, 2)
+      Dim nCount As Integer = 0
+      While m_IsClosingApplication <> 2
+         If nCount > 5 Then
+            Exit While
+         End If
+         ' verifico che il processo DripFeed sia terminato
+         EgtOutLog("Stato chiusura programma: " & m_IsClosingApplication.ToString)
+         Thread.Sleep(100)
+         nCount += 1
+      End While
       ' Uscita
       MainWindowExit()
    End Sub
@@ -1135,13 +1218,17 @@ Class MainWindow
             m_DirectCutPageUC.m_ControlsDirectCutUC.m_GridCut.GridCut_Unloaded(sender, e)
          Case ControlsDirectCutUC.DirectCutPages.FlatteningCut
             m_DirectCutPageUC.m_ControlsDirectCutUC.m_FlatteningCut.FlatteningCut_Unloaded(sender, e)
+      End Select
+
+      Select Case m_DirectCutPageUC.m_ControlsDirectCutUC1.m_ActiveDirectCutPage
          Case ControlsDirectCutUC.DirectCutPages.CopyTemplate
             m_DirectCutPageUC.m_ControlsDirectCutUC1.m_CopyTemplate.CopyTemplate_Unloaded(sender, e)
          Case ControlsDirectCutUC.DirectCutPages.Polishing
             m_DirectCutPageUC.m_ControlsDirectCutUC1.m_Polishing.Polishing_Unloaded(sender, e)
-         Case ControlsDirectCutUC.DirectCutPages.SawTest
+         Case ControlsDirectCutUC1.DirectCutPages.SawTest
             m_DirectCutPageUC.m_ControlsDirectCutUC1.m_SawTest.SawTest_Unloaded(sender, e)
       End Select
+
       Return True
    End Function
 
@@ -1201,7 +1288,7 @@ Class MainWindow
    Private Sub MainWindow_ContentRendered(sender As Object, e As EventArgs) Handles Me.ContentRendered
       ' Verifico presenza del collegamento al CN
       m_bNCLink = (GetPrivateProfileInt(S_GENERAL, K_CNLINK, 0, m_sIniFile) <> 0) And
-                  Not GetKeyOption( KEY_OPT.OFFICE_TYPE)
+                  Not GetKeyOption(KEY_OPT.OFFICE_TYPE)
       m_CNCommunication.CNCommunication_Initialization()
       ' Se linea di produzione abilitata e collegata, lancio relativo timer
       If m_bNCLink And m_CurrentMachine.bProdLine Then
@@ -1211,11 +1298,17 @@ Class MainWindow
          m_ProdLineTimer.Interval = TimeSpan.FromMilliseconds(2000)
          m_ProdLineTimer.Start()
       End If
-
+      ' di default attivo la pagina CadCut
+      If m_OnlyFrame Then
+         m_ActivePage = MainWindow.Pages.FrameCut
+      Else
+         m_ActivePage = MainWindow.Pages.CadCut
+      End If
       ' seleziono il tipo di avvio
       m_CurrentProjectPageUC.StartProgram()
       ' aggiorno la grafica
       EgtZoom(ZM.ALL, True)
+
    End Sub
 
    Friend Sub EgtWPFInit()
@@ -1247,8 +1340,34 @@ Class MainWindow
       Dim bHeadH1 As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
       EgtSetCurrentContext(nCurrCtx)
       ' Aggiorno interfaccia
-      CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
-      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      If m_OnlyFrame Then
+         If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS And
+            m_ActivePage <> Pages.RawPart And m_ActivePage <> Pages.DirectCut And m_ActivePage <> Pages.Simulation Then
+            Dim FrameWnd As New EgtMsgBox(Me, EgtMsg(91141), EgtMsg(91142), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+            '' Gestione stato FastGrid
+            'm_CadCutPageUC.m_FastGridSlabManager.OnPreNewProject()
+            ' Cancello progetto salvato con nome da file ini
+            WritePrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, "", GetIniFile())
+            ' Scelta tavola della macchina
+            Dim nTabInd As Integer = m_CadCutPageUC.m_ProjectMgr.ChooseTable()
+            ' Creo nuovo progetto
+            m_CurrentProjectPageUC.NewProject(nTabInd, False)
+            '' Gestione stato FastGrid
+            'm_CadCutPageUC.m_FastGridSlabManager.OnPostNewProject()
+            FrameCutBtn_Click(Nothing, Nothing)
+            CadCutBtn.IsEnabled = False
+         Else
+            FrameCutBtn.IsEnabled = True
+            CadCutBtn.IsEnabled = False
+            ' Attivo il pulsante FRAME
+            'FrameCutBtn.IsChecked = True
+            'CadCutBtn.IsChecked = False
+         End If
+      Else
+         CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
+         FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      End If
+
       ' DirectCutBtn.IsEnabled = bHeadH1
    End Sub
 
@@ -1277,7 +1396,9 @@ Class MainWindow
          m_CNCommunication.m_CN.ReadEls_Add_Parameter(m_CurrentMachine.sVarProjFinished, 1)
          Dim nVarFin As Integer = 0
          For I As Integer = 1 To 4
-            System.Threading.Thread.Sleep(50)
+            If Not m_CurrentMachine.bDemo Then
+               System.Threading.Thread.Sleep(50)
+            End If
             If m_CNCommunication.m_CN.n_DReadELS_handle = 1 Then
                nVarFin = CInt(m_CNCommunication.m_CN.d_DReadELS_value)
                Exit For
@@ -1290,11 +1411,11 @@ Class MainWindow
             ' Salvo in INI indice del progetto terminato
             WritePrivateProfileString(S_GENERAL, K_LASTPROJFINISHED, nVarFin.ToString("D4"), GetIniFile())
             ' Salvo in INI data e ora attuali di termine lavorazione del progetto (solo gli ultimi 10 tramite modulo)
-            Dim sKey As String = K_DATETIMEFINISHED & "." & ( nVarFin Mod 10).ToString() 
+            Dim sKey As String = K_DATETIMEFINISHED & "." & (nVarFin Mod 10).ToString()
             Dim sDateTime As String = My.Computer.Clock.LocalTime.ToString("dd.MM.yyyy HH\:mm\:ss")
             WritePrivateProfileString(S_GENERAL, sKey, sDateTime, GetIniFile())
             ' Eseguo script
-            ExecFinishedProgScript( nVarFin, sDateTime)
+            ExecFinishedProgScript(nVarFin, sDateTime)
          End If
       End If
       ' Se OmagVIEW blocca, esco (riproverò al prossimo giro)
@@ -1330,16 +1451,18 @@ Class MainWindow
       ' Se richieste modalità standard o speciali
       If m_CurrentMachine.nSaveProduced <> 3 Then
          StandardAndSpecialViewFileManagement()
-      ' altrimenti modalità custom
+         ' altrimenti modalità custom
       Else
-         CustomViewFileManagement( nProjInd)
+         CustomViewFileManagement(nProjInd)
       End If
       ' Leggo variabile con indice progetto da copiare per OmagVIEW (standard E80025)
       m_CNCommunication.m_CN.n_DReadELS_handle = 0
       m_CNCommunication.m_CN.ReadEls_Add_Parameter(m_CurrentMachine.sVarProjCopy, 1)
       Dim nVarCopy As Integer = 0
       For I As Integer = 1 To 10
-         System.Threading.Thread.Sleep(50)
+         If Not m_CurrentMachine.bDemo Then
+            System.Threading.Thread.Sleep(50)
+         End If
          If m_CNCommunication.m_CN.n_DReadELS_handle = 1 Then
             nVarCopy = CInt(m_CNCommunication.m_CN.d_DReadELS_value)
             Exit For
@@ -1540,7 +1663,7 @@ Class MainWindow
                nNewProjInd -= 1
             End While
          End If
-      ' se altrimenti richiesto progetto successivo
+         ' se altrimenti richiesto progetto successivo
       ElseIf nMove > 0 Then
          nNewProjInd = nProjInd + 1
          If nProjInd > nLastProj Then
@@ -1641,7 +1764,7 @@ Class MainWindow
             Catch ex As Exception
                EgtOutLog("Error erasing " & sDestEplFile)
             End Try
-         ' altrimenti, ogni commessa ha il suo file dei pezzi rovinati
+            ' altrimenti, ogni commessa ha il suo file dei pezzi rovinati
          Else
             ' Sposto nel direttorio temporaneo
             Dim sDestEplFile = m_sTempDir & "\" & CURR_PROJ_EPL
@@ -1751,7 +1874,7 @@ Class MainWindow
       Return True
    End Function
 
-   Private Function CustomViewFileManagement( nProjInd As Integer) As Boolean
+   Private Function CustomViewFileManagement(nProjInd As Integer) As Boolean
       ' Se non esiste file EPL, esco
       Dim sSouEplFile As String = m_CurrentMachine.sLineDataDir & "\" & CURR_PROJ_EPL
       If Not My.Computer.FileSystem.FileExists(sSouEplFile) Then Return True
@@ -1790,7 +1913,7 @@ Class MainWindow
       ' Verifico progetto restituito da View
       If nProjInd = 0 Then nProjInd = nLastCopy
       ' Leggo variabile con data termine lavorazione
-      Dim sKey As String = K_DATETIMEFINISHED & "." & ( nProjInd Mod 10).ToString() 
+      Dim sKey As String = K_DATETIMEFINISHED & "." & (nProjInd Mod 10).ToString()
       GetPrivateProfileString(S_GENERAL, sKey, sDateTime, sDateTime, GetIniFile())
       ' Recupero direttorio per pezzi rovinati
       Dim sRuPartsDir As String = GetRuinedPartsDir()
@@ -1817,7 +1940,7 @@ Class MainWindow
       Return True
    End Function
 
-   Friend Function ExecSentProgScript( bDirectCut As Boolean, Optional bAlreadySent As Boolean = False) As Boolean
+   Friend Function ExecSentProgScript(bDirectCut As Boolean, Optional bAlreadySent As Boolean = False) As Boolean
       ' Verifico esistenza script
       Dim sLuaPath As String = m_CurrentMachine.sMachDir() & "\Scripts\SentProg.lua"
       If Not My.Computer.FileSystem.FileExists(sLuaPath) Then Return True
@@ -1836,8 +1959,8 @@ Class MainWindow
       End If
       EgtLuaResetGlobVar("SPS")
       If nErr <> 0 Then
-          EgtOutLog("Error in SentProg : " & nErr.ToString())
-          m_CurrentProjectPageUC.SetErrorMessage(EgtMsg(90325))       'Errore nel salvataggio delle statistiche
+         EgtOutLog("Error in SentProg : " & nErr.ToString())
+         m_CurrentProjectPageUC.SetErrorMessage(EgtMsg(90325))       'Errore nel salvataggio delle statistiche
       End If
       Return (nErr = 0)
    End Function
@@ -1919,15 +2042,15 @@ Class MainWindow
       End If
       ' Dichiaro progetto passato da View
       If nProjInd = m_CurrentProjectPageUC.GetCurrentProject() Then
-         EgtSetInfo( EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_UNLOADSAVED, 1)
+         EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_UNLOADSAVED, 1)
       Else
          Dim nTmpCtx As Integer = EgtInitContext()
          If nTmpCtx <> 0 Then
             Dim sNgeFile As String = GetSaveDir() & "\" & nProjInd.ToString("D4") & ".nge"
-            EgtOpenFile( sNgeFile)
-            EgtSetInfo( EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_UNLOADSAVED, 1)
-            EgtSaveFile( sNgeFile, NGE.CMPTEXT)
-            EgtDeleteContext( nTmpCtx)
+            EgtOpenFile(sNgeFile)
+            EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_UNLOADSAVED, 1)
+            EgtSaveFile(sNgeFile, NGE.CMPTEXT)
+            EgtDeleteContext(nTmpCtx)
             EgtSetCurrentContext(m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
          End If
       End If
@@ -1961,21 +2084,21 @@ Class MainWindow
    ' Evento che apre AboutBox quando viene clickato il logo
    Private Sub LogoBrd_MouseDown(sender As Object, e As MouseButtonEventArgs) Handles LogoBrd.MouseDown
       ' Se non premuto Shift -> AboutBox
-      If ( Keyboard.Modifiers And ModifierKeys.Shift) = 0 Then  
-         Dim AboutBox As New AboutBoxWD( Me)
-      ' Altrimenti lancio cambio macchina (solo uso interno)
+      If (Keyboard.Modifiers And ModifierKeys.Shift) = 0 Then
+         Dim AboutBox As New AboutBoxWD(Me)
+         ' Altrimenti lancio cambio macchina (solo uso interno)
       Else
          If m_ActivePage = Pages.CadCut Or m_ActivePage = Pages.FrameCut Then
             ' Cambio macchina
-            EgtLuaCreateGlobTable( "CHM")
-            EgtLuaExecFile( GetConfigDir() & "\ChangeMachine.lua")
+            EgtLuaCreateGlobTable("CHM")
+            EgtLuaExecFile(GetConfigDir() & "\ChangeMachine.lua")
             Dim nRestart As Integer = 0
-            EgtLuaGetGlobIntVar( "CHM.RESTART", nRestart)
-            EgtLuaResetGlobVar( "CHM")
+            EgtLuaGetGlobIntVar("CHM.RESTART", nRestart)
+            EgtLuaResetGlobVar("CHM")
             ' Riavvio
             If nRestart = 1 Then
                Close()
-               Process.Start( Application.ResourceAssembly.Location)
+               Process.Start(Application.ResourceAssembly.Location)
             End If
          End If
       End If
@@ -1997,6 +2120,7 @@ Class MainWindow
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       EgtResetMark(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+      m_CadCutPageUC.m_NestPage.m_CurrToolFromSelectedSawCurv = String.Empty
       m_CadCutPageUC.m_ProjectMgr.TestBtn.IsChecked = False
       Me.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
    End Sub

My Project/AssemblyInfo.vb

@@ -22,7 +22,7 @@ Imports System.Windows
 #End If
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("OmagCUT")>
-<Assembly: AssemblyCopyright("Copyright ©  2015-2023 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2015-2025 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(False)>
 
@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.5.1.2")>
-<Assembly: AssemblyFileVersion("2.5.1.2")>
+<Assembly: AssemblyVersion("2.7.5.1")>
+<Assembly: AssemblyFileVersion("2.7.5.1")>

NcComm/CN_Siemens.vb

@@ -87,6 +87,7 @@ Public Class CN_Siemens
             Case 8   ' Modalita Ref Point
                sDBVarPath &= "REF_POINT"
          End Select
+         ' /plc/"OmagCUT_DB".CTRL.AUTO
          DVariables_WriteVariables3(sDBVarPath, 1, 1, 0, 0, "")
          Return 0
       Else
@@ -132,7 +133,7 @@ Public Class CN_Siemens
    Public Overrides Function read_active_mode() As Short
       'EgtOutLog("Modo attivo: " & M_MMFiles.SiemensRet.n_param2)
       If m_IsSiemensOne Or m_IsActiveModeSubscription Then
-         Select Case n_data(3)
+         Select Case n_data(n_index_mode)
             Case 1
                Return 0
             Case 2
@@ -144,7 +145,7 @@ Public Class CN_Siemens
          End Select
       Else
          ' per verificare che la comunicazione funzioni correttamente
-         EgtOutLog("Modo -read_active_mode-: " & M_MMFiles.SiemensRet.n_param2.ToString)
+         ' EgtOutLog("Modo -read_active_mode-: " & M_MMFiles.SiemensRet.n_param2.ToString)
          Return M_MMFiles.read_active_mode()
          'Return CShort(M_MMFiles.SiemensRet.n_param2)
       End If
@@ -152,7 +153,12 @@ Public Class CN_Siemens
 
    Public Overrides Function Is_G24_active() As Boolean
 
-      Return M_MMFiles.SiemensRet.b_interf_G24
+      If m_IsSiemensOne Or m_IsActiveModeSubscription Then
+         Return b_data(n_index_is_G24_active)
+
+      Else
+         Return M_MMFiles.SiemensRet.b_interf_G24
+      End If
 
    End Function
 
@@ -217,12 +223,12 @@ Public Class CN_Siemens
    Public Overrides Sub DVariables_WriteVariables3(VarAddr As String, ParType As Short, nVarValue As Integer, lVarValue As Long, dVarValue As Double, sVarValue As String)
       Dim n_ret As Short = Write_var(VarAddr, ParType, nVarValue, lVarValue, dVarValue, sVarValue)
       'EgtOutLog("CN SIEMENS Dopo scrittura variabile")
-
    End Sub
 
    Public Overrides Sub DVariables_Read_Subscription(VarAddr As String, ParType As Short, Index As Integer)
+      ' Ricevo il percorso della varibile, il tipo 
       Dim n_ret As Short = Read_subscription(VarAddr, ParType, Index)
-      'EgtOutLog("CN SIEMENS Dopo lettura abbonamento")
+      EgtOutLog(" ABBONAMENTO (Esito: " & n_ret.ToString & ") -> Address: " & VarAddr & ", Type: " & ParType.ToString & ", Index: " & Index.ToString)
    End Sub
 
    '

NcComm/CN_generico.vb

@@ -8,7 +8,7 @@ Public MustInherit Class CN_generico
    Public Const MAX_VAR As Short = 100
    Public Const MAX_VALUES As Short = 9           ' Max. index to read the data from the FXServer array
    Public Const MAX_TOOLS As Short = 100
-   Public Const NUM_DATA = 55                     ' Numero di dati del CN (Speed,Feed,...)
+   Public Const NUM_DATA = 58                     ' Numero di dati del CN (Speed,Feed,...)
 
    Public m_NewVariable As Boolean = False        ' per scrittura delle vairbaili Apllication del PLC
 
@@ -70,8 +70,22 @@ Public MustInherit Class CN_generico
       Parking = 52
       EnableZone = 53
       EnablePC = 54
+
+      nAxes = 55
+
+      ResetStatus = 56
+
+      CPos = 57
    End Enum
 
+   Public Enum Type As Short
+      TBoolean = 0
+      TInteger = 1
+      TLong = 2
+      TDouble = 3
+      TString = 4
+
+   End Enum
 #End Region
 
 #Region " Struct"
@@ -128,6 +142,9 @@ Public MustInherit Class CN_generico
    Public d_param1 As Double
    Public sz_string As String                 ' ( MAX 200 caratteri )
 
+   ' Indice del vettore n_data associato alla lettura nMode
+   Public n_index_mode As Integer = 0
+   Public n_index_is_G24_active As Integer = 0
    Public b_data(14) As Boolean
    Public n_data(14) As Int16
    Public l_data(14) As Long
@@ -218,10 +235,31 @@ Public MustInherit Class CN_generico
    Public bRemote As Boolean
    ' Nuovi di bottoni -------------------------------------------
 
+   ' gestione speciale asse C
+   Public bCPos As Boolean = False
+   Public dCPos As Double
+
+   ' solo per NumOld
+   Public bIsDripFeed As Boolean = False
+
+   ' usato nel FANUC per leggere lo stato macchina se 5 assi attivo
+   Public b5AxesActive As Boolean
+
    Public nMachineMode As Integer
 
    Public m_szCnDataVar(NUM_DATA - 1) As String
-
+   '
+   ' nuovi dal 29-III-2023 per Fanuc
+   '
+   Public n_Base_addr_int_vars As Integer = 59800
+   Public n_Base_addr_byte_for_bits_vars As Integer = 59820
+   Public n_num_var_int_to_read As Short = 10
+   Public n_num_var_byte_for_bits_to_read As Short = 30
+   Public s_addr_set_nc_mode As String = "D59825"
+   Public s_addr_feedhold As String = "D59850.6"
+   '
+   ' Eventi
+   '
    Public Event NewPositionData(ByVal sender As Object)
    Public Event NewPosDeltaData(ByVal sender As Object)
    Public Event NewVarChanged(ByVal sender As Object)
@@ -294,8 +332,8 @@ Public MustInherit Class CN_generico
 
    Public MustOverride Function DTool_set_read_range(n_start As Short, n_stop As Short) As Short
 
-   Public MustOverride Function DTool_write_tool(n_tool_number As Short, Length_X As Double, Radius As Double, TipRadius_Z As Double, _
-                                    DLength_X As Double, DTipRadius_Z As Double, _
+   Public MustOverride Function DTool_write_tool(n_tool_number As Short, Length_X As Double, Radius As Double, TipRadius_Z As Double,
+                                    DLength_X As Double, DTipRadius_Z As Double,
                                     nDirection As Short, nType As Short, nH As Integer) As Short
 
    Public Overridable Function SetProgramMainOrSub(bMain As Boolean) As Boolean
@@ -341,4 +379,36 @@ Public MustInherit Class CN_generico
 
 #End Region
 
+#Region " Nuovi metodi pubblici"
+
+   Public Overridable Function NC_read_var_short(VarAddr As String, ByRef value As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_read_var_short_range(VarStartAddr As String, VarEndAddr As String, ByRef values() As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_write_var_short(VarAddr As String, ByRef value As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_read_var_bit(VarAddr As String, ByRef value As Boolean) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_write_var_bit(VarAddr As String, ByRef value As Boolean) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_pulse_bit(VarAddr As String) As Boolean
+      Return False
+   End Function
+   Public Overridable Function Geppo() As Boolean
+      Return False
+   End Function
+
+#End Region
+
+
 End Class

NcComm/M_MMFiles.vb

@@ -19,8 +19,8 @@ Module M_MMFiles
 
 #Region " Structures"
 
-
-   <StructLayout(LayoutKind.Sequential)> _
+   ' Struttura per spedire un "comando" al Siemens
+   <StructLayout(LayoutKind.Sequential)>
    Structure SiemensSendStruct
 
       Public n_Flag As Integer
@@ -46,7 +46,7 @@ Module M_MMFiles
 
    Private SiemensSend As SiemensSendStruct
 
-
+   ' Struttura per leggere l'esito di un "comando" al Siemens
    <StructLayout(LayoutKind.Sequential)> _
    Structure SiemensRetStruct
 
@@ -75,6 +75,7 @@ Module M_MMFiles
       Public b_is_laser_ON As Boolean
       Public b_is_spindle_ON As Boolean
 
+      ' Vettore assi macchina (file SiemensComm: axes_0_M, axes_0_P)
       <MarshalAs(UnmanagedType.ByValArray, ArraySubType:=UnmanagedType.R8, SizeConst:=16)> _
       Public d_interf_axis_position() As Double
 
@@ -176,7 +177,7 @@ Module M_MMFiles
 #End Region
 
 #Region " Commands constants"
-
+   ' Elenco codici comandi per spedire programma a SiemensComm.exe
    Enum CMD As Short
 
       CMD_Download_NC_prog = 1
@@ -205,6 +206,7 @@ Module M_MMFiles
    End Enum
 
    Friend Enum VarType As Short
+      TBoolean = 0
       TInteger = 1
       TLong = 2
       TDouble = 3
@@ -343,6 +345,9 @@ Module M_MMFiles
    Function ActivateProgram(ByVal sz_part_program As String) As Short
       'EgtOutLog("ActivateProgram start dell'm_mmFiles")
 
+      EgtOutLog("Flag di comando: " & CMD.CMD_ActivateProgram.ToString)
+      EgtOutLog("Stringa di comando: " & sz_part_program.ToString)
+
       SiemensSend.n_Command = CMD.CMD_ActivateProgram
       SiemensSend.sz_string = sz_part_program
 
@@ -370,7 +375,8 @@ Module M_MMFiles
       SiemensSend.n_Command = CMD.CMD_CycleStart
 
       execute_command()
-      'EgtOutLog("CycleStart end dell'm_mmFiles")
+      ' Rimango in attesa
+      EgtOutLog(" → CycleStart")
       Return SiemensRet.n_result
 
    End Function
@@ -597,16 +603,15 @@ Module M_MMFiles
       'EgtOutLog("Write_Nc_var start dell'm_mmFiles")
       SiemensSend.n_Command = CMD.CMD_Read_NC_subscription
       SiemensSend.sz_string_2 = VarAddr ' indirizzo su CN dell' oggetto da scrivere 
-
+      EgtOutLog(" → Sottoscrivo lettura di '" & VarAddr & "'")
       SiemensSend.n_param1 = Index   ' tipo di dato da scrivere
-
+      EgtOutLog("   Indice del vettore associato '" & Index & "'")
       SiemensSend.n_param2 = ParType   ' tipo di dato da scrivere
-
+      EgtOutLog("   Indice tipo di variabile '" & ParType & "'")
       execute_command()
       m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message = SiemensRet.sz_interf_error_message
-
-      EgtOutLog("sz_interf_error_message: " & m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message)
-      EgtOutLog("n_result: " & SiemensRet.n_result)
+      EgtOutLog("   sz_interf_error_message: " & m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message)
+      EgtOutLog("   n_result: " & SiemensRet.n_result)
       Return SiemensRet.n_result
    End Function
 
@@ -765,7 +770,7 @@ Module M_MMFiles
          End If
 
          ' copio variabili in abbonamento
-         For Index As Integer = 0 To 5
+         For Index As Integer = 0 To 14
             CurrCN.b_data(Index) = SiemensRet.b_data(Index)
             CurrCN.n_data(Index) = SiemensRet.n_data(Index)
             CurrCN.l_data(Index) = SiemensRet.l_data(Index)

NcComm/M_Num.vb

@@ -53,14 +53,14 @@ Namespace Num
       Dim WithEvents objDRunTimeSystem As FXServer.DRunTimeSystem
       Dim WithEvents objDGroupManager As FXServer.DGroupManager
       Dim WithEvents objDReadELS As FXServer.DReadELS
-      ' questa è classe che serve a scrivere i dati nel PLC
+      ' questa � classe che serve a scrivere i dati nel PLC
       Dim WithEvents objDPlcVariables As FXServer.DPlcVariables
-      ' questa è la classe che serve a scrivere i dati nelle variabili E
+      ' questa � la classe che serve a scrivere i dati nelle variabili E
       Dim WithEvents objDVariables As FXServer.DVariables
       Dim WithEvents objDReadTestExectime As FXServer.DReadTestExectime
       Dim WithEvents objDPosition As FXServer.DPosition
       Dim WithEvents objDNCKParameter As FXServer.DNCKParameter
-      ' questa è la classe che serve a scrivere i comandi MDI (come ad esempio le funzioni M)
+      ' questa � la classe che serve a scrivere i comandi MDI (come ad esempio le funzioni M)
       Dim WithEvents objDMdiCommand As FXServer.DMdiCommand
       Dim WithEvents objDMainCncData As FXServer.DMainCncData
 
@@ -458,7 +458,7 @@ Namespace Num
          'sz_var_names.Add("Application.IOCONFIG_GLOBALS.Flexium_NCK.WCNC.Spindle[2].Override")     ' segnaposto per la speed override 
          'sz_var_names.Add("Application.GVL_HMI_OMAG.HMI_Vel_prog")                                 ' FEED
          'sz_var_names.Add("Application.GVL_HMI_OMAG.HMI_LabRPM")                                   ' Speed
-         'sz_var_names.Add("Application.GVL_HMI_OMAG.HMI_LabAmper")                                 ' Ampère = *0.01
+         'sz_var_names.Add("Application.GVL_HMI_OMAG.HMI_LabAmper")                                 ' Amp�re = *0.01
 
          ' Creo lista nomi variabili PLC da leggere
          m_nCnDataVarNum = 0
@@ -823,7 +823,7 @@ Namespace Num
 
 
         ' Only for FX Server >= 3.9.0.0 
-        ' poi in realtà ritorna sempre tipo = -1 per cui è eguale alle altre.....
+        ' poi in realt� ritorna sempre tipo = -1 per cui � eguale alle altre.....
         Private Sub objDReadELS_ValueChanged3(nHandle As Integer, value As Object, DataType As Short, Writable As Short, nerrorCode As Short) Handles objDReadELS.ValueChanged3
 
             Dim edata_type As eDatatype
@@ -996,7 +996,7 @@ Namespace Num
                   d_spindle_eff(0) = CDbl(values(n))
                Case CnData.SpeedOvr   ' (5) Potenziom. speed  = ...
                   n_spindle_override(0) = CShort(Math.Round((CDbl(values(n)) * 50 / 255) + 50))
-               Case CnData.Power      ' (6) Ampère = * 0.01
+               Case CnData.Power      ' (6) Amp�re = * 0.01
                   d_spindle_power = CDbl(CLng(values(n))) * 0.01
                   b_spindle_power_changed = True
                Case CnData.Spindle     ' (7) Stato rotazione mandrino
@@ -1095,6 +1095,9 @@ Namespace Num
                Case CnData.EnablePC     ' (54)
                   nEnablePc = CInt(values(n))
 
+               Case CnData.CPos     ' (57)
+                  dCPos = CDbl(values(n))
+
             End Select
          Next
 
@@ -1701,11 +1704,11 @@ Namespace Num
             nTimeOut += 1
          End While
          If Not bSetModeDone Then
-            EgtOutLog("Errore cambio modalità in MDI: " & TIMEOUT)
+            EgtOutLog("Errore cambio modalit� in MDI: " & TIMEOUT)
             Return TIMEOUT   'Errore di timeout
          End If
          If nSetModeResult <> 0 Then
-            EgtOutLog("Errore 2 cambio modalità in MDI: " & nSetModeResult)
+            EgtOutLog("Errore 2 cambio modalit� in MDI: " & nSetModeResult)
          End If
          Return nSetModeResult
 

OmagCUT.vbproj

@@ -115,6 +115,9 @@
     <Reference Include="AxInterop.FXLib">
       <HintPath>..\..\EgtProg\OmagCUT\AxInterop.FXLib.dll</HintPath>
     </Reference>
+    <Reference Include="DotNetZip">
+      <HintPath>..\..\EgtProg\OmagCUT\DotNetZip.dll</HintPath>
+    </Reference>
     <Reference Include="EgtPHOTOLib">
       <HintPath>..\..\EgtProg\Dll32\EgtPHOTOLib.dll</HintPath>
     </Reference>
@@ -122,11 +125,13 @@
       <SpecificVersion>False</SpecificVersion>
       <HintPath>..\..\EgtProg\DllD32\EgtUILib.dll</HintPath>
     </Reference>
-    <Reference Include="EgtWPFLib">
-      <HintPath>..\..\EgtProg\DllD32\EgtWPFLib.dll</HintPath>
+    <Reference Include="EgtWPFLib, Version=2.5.2.2, Culture=neutral, processorArchitecture=MSIL">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\EgtProg\Dll32\EgtWPFLib.dll</HintPath>
     </Reference>
-    <Reference Include="EgtWPFLib5">
-      <HintPath>..\..\EgtProg\OmagCUT\EgtWPFLib5.dll</HintPath>
+    <Reference Include="EgtWPFLib5, Version=2.5.2.2, Culture=neutral, processorArchitecture=MSIL">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\EgtProg\Dll32\EgtWPFLib5.dll</HintPath>
     </Reference>
     <Reference Include="Interop.FXLib">
       <HintPath>..\..\EgtProg\OmagCUT\Interop.FXLib.dll</HintPath>
@@ -140,9 +145,6 @@
       <HintPath>..\..\EgtProg\OmagCUT\Interop.FXServer.dll</HintPath>
       <EmbedInteropTypes>True</EmbedInteropTypes>
     </Reference>
-    <Reference Include="Ionic.Zip">
-      <HintPath>..\..\EgtProg\OmagCUT\Ionic.Zip.dll</HintPath>
-    </Reference>
     <Reference Include="PresentationFramework.Aero" />
     <Reference Include="System.Core" />
     <Reference Include="System.Data.SQLite, Version=1.0.112.0, Culture=neutral, PublicKeyToken=db937bc2d44ff139, processorArchitecture=x86">
@@ -172,9 +174,18 @@
     <Compile Include="AboutBox\AboutBoxWD.xaml.vb">
       <DependentUpon>AboutBoxWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="CadCuts\ChooseTestToolWD.xaml.vb">
+      <DependentUpon>ChooseTestToolWD.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="CadCuts\ChangeToolWD.xaml.vb">
+      <DependentUpon>ChangeToolWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="CadCuts\SelectPartFromFamilyWD.xaml.vb">
       <DependentUpon>SelectPartFromFamilyWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="CadCuts\SelParkIndWD.xaml.vb">
+      <DependentUpon>SelParkIndWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="CAM\CamPolishing.vb" />
     <Compile Include="DirectCuts\ControlsDirectCutUC.xaml.vb">
       <DependentUpon>ControlsDirectCutUC.xaml</DependentUpon>
@@ -207,6 +218,9 @@
     <Compile Include="DrawImport\UnderDrillUC.xaml.vb">
       <DependentUpon>UnderDrillUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="LicenseWindow.xaml.vb">
+      <DependentUpon>LicenseWindow.xaml</DependentUpon>
+    </Compile>
     <Compile Include="Machine\AlarmsPageUC.xaml.vb">
       <DependentUpon>AlarmsPageUC.xaml</DependentUpon>
     </Compile>
@@ -225,6 +239,9 @@
     <Compile Include="Machine\WaterJetPageUC.xaml.vb">
       <DependentUpon>WaterJetPageUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="NcComm\fwlib32.vb" />
+    <Compile Include="NcComm\M_Fanuc.vb" />
+    <Compile Include="NcComm\M_Fanuc_hi.vb" />
     <Compile Include="Project\AddToDataBaseUC.xaml.vb">
       <DependentUpon>AddToDataBaseUC.xaml</DependentUpon>
     </Compile>
@@ -240,6 +257,9 @@
     <Compile Include="Project\CicloStartWD.xaml.vb">
       <DependentUpon>CicloStartWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="RawPhoto\OtherRefTabWD.xaml.vb">
+      <DependentUpon>OtherRefTabWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="RawPhoto\SlabIdWD.xaml.vb">
       <DependentUpon>SlabIdWD.xaml</DependentUpon>
     </Compile>
@@ -433,10 +453,22 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="CadCuts\ChooseTestToolWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="CadCuts\ChangeToolWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="CadCuts\SelectPartFromFamilyWD.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="CadCuts\SelParkIndWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DirectCuts\ControlsDirectCutUC.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
@@ -477,6 +509,10 @@
       <SubType>Designer</SubType>
       <Generator>XamlIntelliSenseFileGenerator</Generator>
     </Page>
+    <Page Include="LicenseWindow.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="Machine\AlarmsPageUC.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
@@ -514,6 +550,10 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="RawPhoto\OtherRefTabWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="RawPhoto\SlabIdWD.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -896,7 +936,7 @@
     <Resource Include="Resources\MachineStatusImage\Single.png" />
   </ItemGroup>
   <ItemGroup>
-    <Resource Include="Resources\ToolChangerPos.png" />
+    <Resource Include="Resources\ToolChangerPos_OLD.png" />
   </ItemGroup>
   <ItemGroup>
     <Resource Include="Resources\Manual.png" />
@@ -1322,6 +1362,63 @@
   <ItemGroup>
     <Resource Include="Resources\NewIcons\Quality.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\ToolChangerPos.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\RefTab.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\PhotoHQ.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\icone-tagli-1HQ.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\ImportPageListBoxImages\4.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\ImportPageListBoxImages\5.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Muovi-grezzo.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\ON_OFF-REG.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Move-Spot-Reg.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Logo-Egalware.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Logo-Egalware %282%29.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Logo-Egalware %283%29.png" />
+    <Resource Include="Resources\NewIcons\RawHeight.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\LightArrowOff.png" />
+    <Resource Include="Resources\NewIcons\LightArrowOn.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Park_Busy.png" />
+    <Resource Include="Resources\NewIcons\icoRight-3D.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\icoLeft-3D.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\icoBack-3D.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\icoFront-3D.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\icoBottom-3D.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDictionary.xaml

@@ -102,6 +102,7 @@
     <BitmapImage x:Key="AlignPiecesImg" UriSource="Resources/AlignPieces.png"></BitmapImage>
     <BitmapImage x:Key="BarCodeImg" UriSource="Resources/BarCode.png"></BitmapImage>
     <BitmapImage x:Key="SlabIdImg" UriSource="Resources/SlabId.png"></BitmapImage>
+    <BitmapImage x:Key="RefTabImg" UriSource="Resources/NewIcons/RefTab.png"></BitmapImage>
     <BitmapImage x:Key="BottomLeftImg" UriSource="Resources/BottomLeft.png"></BitmapImage>
     <BitmapImage x:Key="BottomRightImg" UriSource="Resources/BottomRight.png"></BitmapImage>
     <BitmapImage x:Key="PartRotOnImg" UriSource="Resources/PartRotOn.png"></BitmapImage>
@@ -132,6 +133,7 @@
     <BitmapImage x:Key="PhotoImg" UriSource="Resources/Photo.png"></BitmapImage>
     <BitmapImage x:Key="RawPartImg" UriSource="Resources/RawPart.png"></BitmapImage>
     <BitmapImage x:Key="RawProbeImg" UriSource="Resources/RawProbe.png"></BitmapImage>
+    <BitmapImage x:Key="RawHeightImg" UriSource="Resources/NewIcons/RawHeight.png"></BitmapImage>
     <BitmapImage x:Key="RightArrowImg" UriSource="Resources/RightArrow.png"></BitmapImage>
     <BitmapImage x:Key="SawProbeImg" UriSource="Resources/SawProbe.png"></BitmapImage>
     <BitmapImage x:Key="SendImg" UriSource="Resources/Send.png"></BitmapImage>
@@ -170,6 +172,7 @@
     <BitmapImage x:Key="Vein-matchImg" UriSource="Resources/NewIcons/Vein-match.png"></BitmapImage>
     <BitmapImage x:Key="Test-lamaImg" UriSource="Resources/NewIcons/Test-lama.png"></BitmapImage>
     <BitmapImage x:Key="Parcheggia-pezzoImg" UriSource="Resources/NewIcons/Parcheggia-pezzo.png"></BitmapImage>
+    <BitmapImage x:Key="Muovi-grezzoImg" UriSource="Resources/NewIcons/Muovi-grezzo.png"></BitmapImage>
     <BitmapImage x:Key="Inserisci-pezzoImg" UriSource="Resources/NewIcons/Inserisci-pezzo.png"></BitmapImage>
     <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
@@ -224,6 +227,7 @@
     <BitmapImage x:Key="QualityWJImg" UriSource="Resources/NewIcons/Quality.png"></BitmapImage>
     <BitmapImage x:Key="Fine-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Fine-allunga-o-accorcia.png"></BitmapImage>
     <BitmapImage x:Key="ON_OFF-singolo-taglioImg" UriSource="Resources/NewIcons/ON_OFF-singolo-taglio.png"></BitmapImage>
+    <BitmapImage x:Key="ON_OFF-REGImg" UriSource="Resources/NewIcons/ON_OFF-REG.png"></BitmapImage>
     <BitmapImage x:Key="Tutti-ONImg" UriSource="Resources/NewIcons/Tutti-ON.png"></BitmapImage>
     <BitmapImage x:Key="Tutti-OFFImg" UriSource="Resources/NewIcons/Tutti-OFF.png"></BitmapImage>
     <BitmapImage x:Key="Inizio-Centro-FuoriImg" UriSource="Resources/NewIcons/Inizio-centro-fuori.png"></BitmapImage>
@@ -239,6 +243,7 @@
     <BitmapImage x:Key="Tutti-allungaImg" UriSource="Resources/NewIcons/Tutti-allunga.png"></BitmapImage>
     <BitmapImage x:Key="Tutti-accorciaImg" UriSource="Resources/NewIcons/Tutti-accorcia.png"></BitmapImage>
     <BitmapImage x:Key="LastProjImg" UriSource="Resources/NewIcons/PlayStep.png"></BitmapImage>
+    <BitmapImage x:Key="Move-Spot-RegImg" UriSource="Resources/NewIcons/Move-Spot-Reg.png"></BitmapImage>
 
     <FontFamily x:Key="OmagCut_Font">./Resources/Fonts/#Century Gothic</FontFamily>
 
@@ -333,7 +338,36 @@
       </Style.Triggers>
    </Style>
 
-    <Style x:Key="OmagCut_Button_Wrap" TargetType="{x:Type Button}" BasedOn="{StaticResource OmagCut_Button}">
+   <Style x:Key="Color_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+      <Setter Property="BorderThickness" Value="{StaticResource BorderThickness}"/>
+      <Setter Property="project:ButtonExtensions.CornerRadius" Value="{StaticResource Button_CornerRadius}"/>
+      <Setter Property="Margin" Value="{StaticResource Button_MarginThickness}"/>
+      <Setter Property="Padding" Value="5"/>
+      <Setter Property="Width" Value="60"/>
+      <Setter Property="Height" Value="35"/>
+      <Setter Property="HorizontalContentAlignment" Value="Center"/>
+      <Setter Property="VerticalContentAlignment" Value="Center"/>
+      <Setter Property="TextBlock.TextAlignment" Value="Center"/>
+      <Style.Triggers>
+         <Trigger Property="IsMouseOver" Value="True">
+            <Setter Property="Background" Value="#FFB8C3CD"/>
+         </Trigger>
+         <Trigger Property="IsPressed" Value="True">
+            <Setter Property="OpacityMask" Value="#33FF0000"/>
+         </Trigger>
+         <Trigger Property="ToggleButton.IsChecked" Value="True">
+            <Setter Property="Background" Value="Transparent"/>
+         </Trigger>
+         <Trigger Property="IsEnabled" Value="False">
+            <Setter Property="Background" Value="#FFF4F4F4"/>
+            <Setter Property="BorderBrush" Value="#FFADB2B5"/>
+            <Setter Property="TextElement.Foreground"  Value="#FF838383"/>
+         </Trigger>
+      </Style.Triggers>
+   </Style>
+
+
+   <Style x:Key="OmagCut_Button_Wrap" TargetType="{x:Type Button}" BasedOn="{StaticResource OmagCut_Button}">
         <Setter Property="ContentTemplate" Value="{StaticResource Button_DataTemplate_Wrap}" />
         <Setter Property="FontSize" Value="{DynamicResource FontSize_LowerCaseCharacter}" />
     </Style>
@@ -790,7 +824,13 @@
       <Setter Property="Margin" Value="0,8,6,4"/>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <!--Style di un immagine in al posto di una text-->
+    <Style x:Key="OmagCut_TextIcon" TargetType="{x:Type Image}" >
+        <Setter Property="Width" Value="30"/>
+        <Setter Property="Height" Value="30"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!-- ScrollBar & it's component (RepeatButton, Thumb) -->
 
@@ -1187,6 +1227,13 @@
       <Setter Property="HorizontalAlignment" Value="Center"/>
    </Style>
 
+   <Style x:Key="OmagCut_ErrorTextBlock" TargetType="{x:Type TextBlock}" BasedOn="{StaticResource OmagCut_UpperCaseCharacterTextBlock}">
+      <Setter Property="Foreground" Value="White"/>
+      <Setter Property="FontStyle" Value="Italic"/>
+      <Setter Property="VerticalAlignment" Value="Center"/>
+      <Setter Property="HorizontalAlignment" Value="Center"/>
+   </Style>
+
    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!--TextBox-->
@@ -1262,11 +1309,14 @@
 
     <Style x:Key="OmagCut_FixedTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
       <Setter Property="BorderBrush" Value="{StaticResource OmagCut_Gray}"/>
-        <Setter Property="Background" Value="White"/>
+      <Setter Property="Background" Value="White"/>
       <Setter Property="IsReadOnly" Value="True"/>
       <Setter Property="IsEnabled" Value="False"/>
+      <Setter Property="TextAlignment" Value="Center"/>
       <Setter Property="Template" Value="{StaticResource FixedTextBoxTemplate}" />
-   </Style>
+      <Setter Property="ToolTipService.ShowOnDisabled" Value="True"/>
+      <Setter Property="ToolTip"  Value="{Binding RelativeSource={RelativeSource Self}, Path=Text}"/>
+    </Style>
 
    <!-- ______________________________________________________________________________________________________________________ -->
 
@@ -2732,5 +2782,16 @@
    </Style>
 
    <!-- *************************************************************************** -->
+   
+   <!--Stile Rettangolo in SplitPaceUC-->
+   <Style x:Key="Rect_SplitPage" TargetType="{x:Type Rectangle}">
+      <Setter Property="Fill" Value="{Binding SawColor}"/>
+      <Setter Property="Stroke" Value="Black"/>
+      <Setter Property="HorizontalAlignment" Value="Center"/>
+      <Setter Property="VerticalAlignment" Value="Center"/>
+      <Setter Property="Height" Value="20"/>
+      <Setter Property="Width" Value="5"/>
+      <Setter Property="StrokeThickness" Value="0.5"/>
+   </Style>
 
 </ResourceDictionary>

Options/OptionsPageUC.xaml.vb

@@ -1304,6 +1304,8 @@ Public Class OptionsPageUC
       End If
       Try
          Using zip As New Ionic.Zip.ZipFile(sZipToCreate, Console.Out)
+            zip.AlternateEncodingUsage = Ionic.Zip.ZipOption.Always
+            zip.AlternateEncoding = Text.Encoding.UTF8
             ' aggiungo file macchine
             For Each sMachineName As String In Machines
                Dim sMachineDir As String = m_MainWindow.GetMachinesRootDir() & "\" & sMachineName

Project/CurrentProjectPageUC.xaml

@@ -7,79 +7,87 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280"
    Initialized="CurrentProjectPage_Initialized" Loaded="CurrentProjectPage_Loaded">
- 
-   <!-- Definizione della CurrentProjectPage -->
-   <Grid Name="CurrentProjectPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
 
-      <!-- Definizione della Grid superiore -->
-      <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="5*"/>
-            <ColumnDefinition Width="7*"/>
-         </Grid.ColumnDefinitions>
-
-      </Grid>
-
-      <!-- Definizione della Grid laterale -->
-        <Grid Grid.RowSpan="3">
-         <Grid.RowDefinitions>
-            <RowDefinition Height="2*"/>
-            <RowDefinition Height="7*"/>
+    <!-- Definizione della CurrentProjectPage -->
+    <Grid Name="CurrentProjectPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
             <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <!-- Definizione della Grid con le caratteristiche del progetto -->
+        <!-- Definizione della Grid superiore -->
+        <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="7*"/>
+            </Grid.ColumnDefinitions>
+        </Grid>
+
+        <!-- Definizione della Grid laterale -->
+        <Grid Grid.RowSpan="3">
+            <Grid.RowDefinitions>
+                <RowDefinition Height="2*"/>
+                <RowDefinition Height="7*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <!-- Definizione della Grid con le caratteristiche del progetto -->
             <Border Name="CurrProjGrid" Style="{DynamicResource OmagCut_MachiningBorder}" Grid.Row="0" >
                 <Grid >
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/>
-               </Grid.RowDefinitions>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="0.2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                    </Grid.RowDefinitions>
 
-               <TextBlock Name="MaterialTxBl" Grid.Row="0"
-                  Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="MaterialTxBx" Grid.Column="1" Grid.Row="0" Width="100"
-                  Style="{DynamicResource OmagCut_FixedTextBox}"/>
-               <TextBlock Name="HeightTxBl" Grid.Row="1"
-                  Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="1" Width="100"
+                    <Image Name="MaterialTxBl" 
+                           Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_TextIcon}"/>
+                    <EgtWPFLib:EgtTextBox Name="MaterialTxBx" Grid.Column="1" Grid.Row="0" Margin="0,0,10,0"
+                   TextAlignment="Right" Style="{DynamicResource OmagCut_FixedTextBox}"/>
+                    <Image Name="HeightTxBl" Grid.Row="1"
+                       Source="{DynamicResource RawHeightImg}" Style="{StaticResource OmagCut_TextIcon}"/>
+                    <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="1" Margin="0,0,10,0"
+                  Style="{DynamicResource OmagCut_FixedTextBox}" TextAlignment="Right"/>
+                   <Image Name="ToolTxBl" Grid.Row="2"
+                       Source="{DynamicResource DB-utensiliImg}" Style="{StaticResource OmagCut_TextIcon}"/>
+                    <EgtWPFLib:EgtTextBox Name="ToolTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,10,0"
+                  Style="{DynamicResource OmagCut_FixedTextBox}" TextAlignment="Right"/>
+                    <Image Name="MachiningTxBl" Grid.Row="3"
+                       Source="{DynamicResource DB-lavorazioniImg}" Style="{StaticResource OmagCut_TextIcon}"/>
+                    <EgtWPFLib:EgtTextBox Name="MachiningTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" TextAlignment="Right"/>
-               <TextBlock Name="ToolTxBl" Grid.Row="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="ToolTxBx" Grid.Column="1" Grid.Row="2" Width="100"
-                  Style="{DynamicResource OmagCut_FixedTextBox}"/>
-               <TextBlock Name="MachiningTxBl" Grid.Row="3"
-                  Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="MachiningTxBx" Grid.Column="1" Grid.Row="3" Width="100"
-                  Style="{DynamicResource OmagCut_FixedTextBox}"/>
 
-            </Grid>
+                </Grid>
 
-         </Border>
+            </Border>
 
-         <ProgressBar Name="PhotoProgress" Grid.Row="2" Height="50" Margin="10,0,10,0" Minimum="0" Maximum="100"/>
+           
+                <ProgressBar Name="PhotoProgress" Grid.Row="2" Height="50" Margin="10,0,10,0" Minimum="0" Maximum="100"/>
 
-         <Border Name="OutMessageBrd" Grid.Row="2" >
-            <TextBlock Name="OutMessageTxBl" TextAlignment="Center"
+            <Border Name="OutMessageBrd" Grid.Row="2" >
+                <TextBlock Name="OutMessageTxBl" TextAlignment="Center"
                Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-         </Border>
+            </Border>
 
-      </Grid>
+        </Grid>
 
-   </Grid>
+        <Grid Name="SceneHostGrid" Grid.Row="1" Grid.Column="1">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="6*"/>
+                <ColumnDefinition Width="1.2*"/>
+            </Grid.ColumnDefinitions>
+        </Grid>
+
+    </Grid>
 
 </UserControl>

Project/CurrentProjectPageUC.xaml.vb

@@ -1,4 +1,5 @@
 Imports System.IO
+Imports System.Security.Cryptography
 Imports System.Windows.Interop
 Imports EgtUILib
 Imports EgtWPFLib
@@ -7,8 +8,10 @@ Imports EgtWPFLib5
 Public Class CurrentProjectPageUC
    ' Dichiarazione eventi
    Friend Event OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+   Friend Event OnMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+   Friend Event OnKeyCancelDownScene(sender As Object, e As System.Windows.Forms.KeyEventArgs)
    ' Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    ' Dichiarazione delle Page UserControl
@@ -17,7 +20,8 @@ Public Class CurrentProjectPageUC
    Private m_bFirst As Boolean = True
    ' Dichiarazione Scene
    Friend WithEvents CurrentProjectScene As New Scene
-   Private CurrentProjectSceneHost As New System.Windows.Forms.Integration.WindowsFormsHost
+   ' Nella pagina Nest gestisco la dimensione della scena per visualizzare la lista dei parcheggi
+   Public CurrentProjectSceneHost As New System.Windows.Forms.Integration.WindowsFormsHost
    ' Identificativo progetto corrente
    Private m_nCurrProj As Integer = 0
    ' Dati del grezzo
@@ -53,15 +57,17 @@ Public Class CurrentProjectPageUC
 
       'Assegnazione scena all'host e posizionamento nella PlacePageGrid
       CurrentProjectSceneHost.Child = CurrentProjectScene
-      CurrentProjectSceneHost.SetValue(Grid.ColumnProperty, 1)
-      CurrentProjectSceneHost.SetValue(Grid.RowProperty, 1)
-      Me.CurrentProjectPageGrid.Children.Add(CurrentProjectSceneHost)
+      CurrentProjectSceneHost.SetValue(Grid.ColumnProperty, 0)
+      CurrentProjectSceneHost.SetValue(Grid.ColumnSpanProperty, 2)
+      ' CurrentProjectSceneHost.SetValue(Grid.RowProperty, 1)
+      'Me.CurrentProjectPageGrid.Children.Add(CurrentProjectSceneHost)
+      Me.SceneHostGrid.Children.Add(CurrentProjectSceneHost)
 
-      'Imposto i messaggi letti dal file dei messaggi
-      MaterialTxBl.Text = EgtMsg(MSG_RAWPARTPAGEUC + 9)       'Material - Materiale
-      HeightTxBl.Text = EgtMsg(MSG_RAWPARTPAGEUC + 5)         'Height - Spessore
-      ToolTxBl.Text = EgtMsg(MSG_CADCUTPAGEUC + 11)           'Tool - Utensile
-      MachiningTxBl.Text = EgtMsg(MSG_CADCUTPAGEUC + 12)      'Machining - Lavorazione
+      'Imposto i messaggi letti dal file dei messaggi      
+      MaterialTxBl.ToolTip = EgtMsg(MSG_RAWPARTPAGEUC + 9)     'Material - Materiale
+      HeightTxBl.ToolTip = EgtMsg(MSG_RAWPARTPAGEUC + 5)       'Height - Spessore
+      ToolTxBl.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 11)           'Tool - Utensile
+      MachiningTxBl.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 12)      'Machining - Lavorazione
 
    End Sub
 
@@ -107,7 +113,7 @@ Public Class CurrentProjectPageUC
          Dim nDepthBits As Integer = GetPrivateProfileInt(S_OPENGL, K_DEPTHBITS, 32, m_MainWindow.GetIniFile())
          CurrentProjectScene.SetViewAttributes(nDriver, b2Buff, nColorBits, nDepthBits)
          ' inizializzo la scena (DB geometrico + visualizzazione) e verifico presenza chiave
-         Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE)
+         Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE) Or m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_LIGHT)
          If Not CurrentProjectScene.Init() Or Not bProd Then
             ' Rimuovo l'host della scena perchè altrimenti rimarrebbe il buco!!
             Me.CurrentProjectPageGrid.Children.Remove(CurrentProjectSceneHost)
@@ -118,11 +124,25 @@ Public Class CurrentProjectPageUC
 #Else
             ' Se manca la chiave
             If m_MainWindow.GetKeyLevel() = -1 Or m_MainWindow.GetKeyLevel() = -2 Then
-               EgtOutLog("Missing Dongle")
-               ' Box di avviso chiave mancante : "Chiave non presente. \n Inserirla e riavviare il programma."  "Errore"
-               Dim sText As String = EgtMsg(MSG_MISSINGKEYWD + 2) & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 3)
-               Dim sTitle As String = EgtMsg(MSG_MISSINGKEYWD + 1)
-               Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_MISSINGKEYWD + 1), EgtMsg(MSG_MISSINGKEYWD + 2) & " " & EgtMsg(MSG_MISSINGKEYWD + 3), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+               If Not EgtGetNetHwKey() Then
+                  EgtOutLog("Missing Dongle")
+                  ' Box di avviso chiave mancante : "Chiave non presente. \n Inserirla e riavviare il programma."  "Errore"
+                  Dim sText As String = EgtMsg(MSG_MISSINGKEYWD + 2) & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 3)
+                  Dim sTitle As String = EgtMsg(MSG_MISSINGKEYWD + 1)
+                  Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_MISSINGKEYWD + 1), EgtMsg(MSG_MISSINGKEYWD + 2) & " " & EgtMsg(MSG_MISSINGKEYWD + 3), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+               Else
+                  EgtOutLog("NetDongle is full")
+                  ' Box di avviso slot chiave di rete occupato : "Chiave di Rete completamente occupata. \n Uscire dal programma su un altro PC." "Errore"
+                  Dim sText As String = EgtMsg(10110) & vbCrLf & EgtMsg(10111)
+                  Dim sTitle As String = EgtMsg(10101)
+                  Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, sTitle, sText, EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+               End If
+            ElseIf m_MainWindow.GetKeyLevel() = -9 Then
+               EgtOutLog("Missing Link with Net Dongle")
+               ' Box di avviso chiave mancante : "Collegamento con la Chiave di rete non riuscito. \n Verificare la connessione." "Errore"
+               Dim sText As String = EgtMsg(10108) & vbCrLf & EgtMsg(10109)
+               Dim sTitle As String = EgtMsg(10101)
+               Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, sTitle, sText, EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
                ' Altrimenti manca la licenza
             Else
                EgtOutLog("Problems with Licence")
@@ -176,7 +196,8 @@ Public Class CurrentProjectPageUC
          ' Inizializzo gestore lavorazioni
          EgtInitMachMgr(m_MainWindow.GetMachinesRootDir(), m_MainWindow.GetToolMakersDir())
          m_bFirst = False
-
+         Dim bOrtoGraphic As Boolean = (GetPrivateProfileInt(S_SCENE, K_ORTOGRAPHIC, 1, m_MainWindow.GetIniFile()) <> 0)
+         EgtSetCameraType(bOrtoGraphic, True)
          ' creo nuovo progetto
          m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
          'NewProject()
@@ -196,9 +217,17 @@ Public Class CurrentProjectPageUC
       Else
          MaterialTxBx.Text = "-----"
       End If
-      ' Visualizzo lama e lavorazione correnti
-      ToolTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSaw
-      MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSawing
+
+      ' se macchina waterjet e senza una lama corrente impostata allora visualizzo info WJ
+      If m_MainWindow.m_CurrentMachine.bWaterJet And String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSaw) Then
+         ToolTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrWaterJet
+         MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrWaterJetting
+         '& "-" & m_MainWindow.m_CurrentMachine.sCurrWaterJettingQuality
+      Else
+         ToolTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSaw
+         MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSawing
+      End If
+
    End Sub
 
    Public Sub StartProgram()
@@ -276,7 +305,7 @@ Public Class CurrentProjectPageUC
       ' se apro la finestra "OpenFolder" l'assegnazione dei Children è fatta direttamente nella classe ProjectMgrUC
       If MyStartLancherWD.CurrSelection <> MODE_LAUNCHER.OpenFolder Then
          ' Carico sottopagina opportuna
-         If GetProjectType() <> PRJ_TYPE.FRAMES Then
+         If GetProjectType() <> PRJ_TYPE.FRAMES And Not m_MainWindow.m_OnlyFrame Then
             CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
             m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
             m_MainWindow.CadCutBtn.IsChecked = True
@@ -314,6 +343,10 @@ Public Class CurrentProjectPageUC
       RaiseEvent OnMouseDownScene(sender, e)
    End Sub
 
+   Private Sub OnMyMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.MouseDoubleClick
+      RaiseEvent OnMouseDownScene_DoubleClick(sender, e)
+   End Sub
+
    Private Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.OnMouseMoveScene
       RaiseEvent OnMouseMoveScene(sender, e)
    End Sub
@@ -326,6 +359,10 @@ Public Class CurrentProjectPageUC
       SetInfoMessage(DistToString(vtDist))
    End Sub
 
+   Private Sub OnMyKeyCancelDownScene(sender As Object, e As System.Windows.Forms.KeyEventArgs) Handles CurrentProjectScene.KeyDown
+      RaiseEvent OnKeyCancelDownScene(sender, e)
+   End Sub
+
    ' Gestione progetto
 
    Friend Sub SetNextProjectIndex()
@@ -399,25 +436,44 @@ Public Class CurrentProjectPageUC
       ' prima di parcheggiare svuoto dei pezzi in parcheggio sia vuota
       m_MainWindow.m_CadCutPageUC.m_NestPage.ResetListOfGruopInPark()
       ' Parcheggio correttamente i pezzi precedentemente salvati
+      Dim nIdList As New List(Of Integer)
+      Dim nStatList As New List(Of Integer)
       Dim nId2 As Integer = EgtGetFirstPart()
       While nId2 <> GDB_ID.NULL
+         ' Forzo lo stato per avere il giusto calcolo delle posizioni per evitare sovrapposizioni
+         EgtSetStatus(nId2, GDB_ST.ON_)
          ' Inserisco correttamente in parcheggio
          m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId2, True)
+         ' Aggiorno lo stato di visualizzazione
+         Dim nInfoStatus As Integer = 1
+         ' Salvo lo stato (per gestire la navigazione)
+         EgtGetInfo(nId2, INFO_PARKSTATUS, nInfoStatus)
+         ' Salvo l'Id e lo stato da impostare successivamente al posizionamento
+         nIdList.Add(nId2)
+         nStatList.Add(nInfoStatus)
          ' Notifica a WeinMatching per modifica Id
          VeinMatching.UpdatePart(nId2)
          ' Passo al pezzo successivo
          nId2 = EgtGetNextPart(nId2)
       End While
+      For IndIndex As Integer = 0 To nIdList.Count - 1
+         EgtSetStatus(nIdList(IndIndex), nStatList(IndIndex))
+      Next
       ' Aggiorno Aree totale e da lavorare dei pezzi
       SetTotalArea(dTotArea)
       UpdateToProduceArea()
       ShowAreas()
+      ' Salvo info di C home
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHome, 0))
+      EgtZoom(ZM.ALL)
       ' Dichiaro progetto non modificato
       EgtResetModified()
       Return True
    End Function
 
-   Friend Function AdjustAdditionalTable( Optional bForced As Boolean = False) As Boolean
+   Friend Function AdjustAdditionalTable(Optional bForced As Boolean = False) As Boolean
       ' Recupero altezza sottotavola corrente
       Dim nFixtId As Integer = EgtGetFirstNameInGroup(EgtGetFirstMachGroup(), MACH_FIXT_GROUP)
       Dim nAddTabId As Integer = EgtGetFirstNameInGroup(nFixtId, MACH_ADD_TABLE)
@@ -429,7 +485,10 @@ Public Class CurrentProjectPageUC
       End If
       ' Se valore cambiato, aggiorno...
       Dim dDeltaZ As Double = m_MainWindow.m_CurrentMachine.dAdditionalTable - dCurrAddTab
-      If Math.Abs(dDeltaZ) > EPS_SMALL Or bForced Then
+      Dim bChanged As Boolean = (Math.Abs(dDeltaZ) > EPS_SMALL)
+      If bChanged Or bForced Then
+         Dim bOldEnMod As Boolean = EgtGetEnableModified()
+         If Not bChanged AndAlso bOldEnMod Then EgtDisableModified()
          AddAdditionalTable()
          UpdateAllRawsZ(dDeltaZ)
          If GetPhoto() <> GDB_ID.NULL Then
@@ -439,12 +498,13 @@ Public Class CurrentProjectPageUC
                ShowPhoto(False)
                Dim nRawGrpId As Integer = EgtGetFirstRawPart()
                While nRawGrpId <> GDB_ID.NULL
-                  Dim nRawSolidId As Integer = EgtGetFirstNameInGroup( nRawGrpId, NAME_RAW_SOLID)
-                  If nRawSolidId <> GDB_ID.NULL Then EgtSetTextureName( nRawSolidId, PHOTO_NAME)
-                  nRawGrpId = EgtGetNextRawPart( nRawGrpId)
+                  Dim nRawSolidId As Integer = EgtGetFirstNameInGroup(nRawGrpId, NAME_RAW_SOLID)
+                  If nRawSolidId <> GDB_ID.NULL Then EgtSetTextureName(nRawSolidId, PHOTO_NAME)
+                  nRawGrpId = EgtGetNextRawPart(nRawGrpId)
                End While
             End If
          End If
+         If Not bChanged AndAlso bOldEnMod Then EgtEnableModified()
       End If
       Return True
    End Function
@@ -464,12 +524,14 @@ Public Class CurrentProjectPageUC
       ' Nuova geometria
       Dim nAddTabId As Integer = GDB_ID.NULL
       ' Se esiste geometria di riferimento
-      Dim nRefAddTabId = EgtGetFirstNameInGroup( EgtGetFirstNameInGroup( EgtGetTableId( MAIN_TAB), "SOLID"), MACH_ADD_TABLE)
+      Dim sNameTable As String = MAIN_TAB
+      EgtGetTableName(sNameTable)
+      Dim nRefAddTabId = EgtGetFirstNameInGroup(EgtGetFirstNameInGroup(EgtGetTableId(sNameTable), "SOLID"), MACH_ADD_TABLE)
       If nRefAddTabId <> GDB_ID.NULL Then
-         nAddTabId = EgtCopyGlob( nRefAddTabId, nFixtId)
-         EgtSetStatus( nAddTabId, GDB_ST.ON_)
-         EgtScale( nAddTabId, new Frame3d( ptMin), 1, 1, dAddTable / 10)
-      ' altrimenti la creo
+         nAddTabId = EgtCopyGlob(nRefAddTabId, nFixtId)
+         EgtSetStatus(nAddTabId, GDB_ST.ON_)
+         EgtScale(nAddTabId, New Frame3d(ptMin), 1, 1, dAddTable / 10)
+         ' altrimenti la creo
       Else
          ' Aggiungo sovratavola nel gruppo dei bloccaggi
          ptMax.z -= DELTAZ_ADDTAB
@@ -480,7 +542,7 @@ Public Class CurrentProjectPageUC
       ' Sistemazioni finali
       If nAddTabId = GDB_ID.NULL Then Return False
       EgtSetName(nAddTabId, MACH_ADD_TABLE)
-      EgtSetColor(nAddTabId, New Color3d(150, 75, 0, 100), True)
+      If nRefAddTabId = GDB_ID.NULL Then EgtSetColor(nAddTabId, New Color3d(150, 75, 0, 100), True)
       EgtSetInfo(nAddTabId, KEY_ADD_TABLE, dAddTable)
       Return True
    End Function
@@ -522,7 +584,24 @@ Public Class CurrentProjectPageUC
          m_MainWindow.m_CurrentMachine.dAdditionalTable = dValue
       End If
       ' forzo visualizzazione eventuali dati su aree
-      SetAreasStatus( True)
+      SetAreasStatus(True)
+      ' Recupero info C Home
+      Dim dCHomeCurrMach As Double
+      Dim dCHomeCurrproj As Double
+      EgtGetAxisHomePos("C", dCHomeCurrMach)
+      ' Verifico che esista l'info del progetto
+      If EgtExistsInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME) Then
+         EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, dCHomeCurrproj)
+         ' Se la macchina indicata ha C Home differente allora comunico un errore del progetto
+         If Math.Abs(dCHomeCurrproj - dCHomeCurrMach) > EPS_ANG_SMALL Then
+            EgtOutLog(" WARNING -> C axes home project is different from current machine, delta ang C home:" & DoubleToString(dCHomeCurrproj - dCHomeCurrMach, 2))
+         End If
+      Else
+         EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHomeCurrMach, 0))
+      End If
+
+      'SelParkIndWD.UpdateViewOnParkInd(False)
+
       ' Dichiaro progetto non modificato
       EgtResetModified()
       Return True
@@ -547,8 +626,8 @@ Public Class CurrentProjectPageUC
       End If
       ' Se la macchina del file è quella impostata
       If String.Compare(sFileMachine, m_MainWindow.GetCurrMachine(), True) = 0 Then
-         AdjustAdditionalTable( True)
-      ' altrimenti avverto, porto i pezzi in parcheggio e cancello il grezzo
+         AdjustAdditionalTable(True)
+         ' altrimenti avverto, porto i pezzi in parcheggio e cancello il grezzo
       Else
          ' Emetto messaggio
          Dim sOut As String = EgtMsg(90320) & " (" & sFileMachine & ")"        ' Macchina diversa
@@ -698,6 +777,17 @@ Public Class CurrentProjectPageUC
          ' Notifico a foto il cambio di path
          EgtChangePhotoPath(nPhotoId, sNewPhoto)
       End If
+
+      '--------------------------------------------------------------------------------
+      If GetPrivateProfileInt(S_GENERAL, K_ENABLEDXFPARK, 0, m_MainWindow.GetIniFile) <> 0 Then
+         ' Gestione visulizzazione lista pezzi in parcheggio
+         Dim sNewFileName As String = SelParkIndWD.GetPathCurrProj()
+         SelParkIndWD.CopyImgSvg(sPath)
+         SelParkIndWD.sActualProj = String.Empty
+         SelParkIndWD.CopyImgSvg(sNewFileName)
+      End If
+      '--------------------------------------------------------------------------------
+
       ' Se assente, inserisco contrassegno di progetto OmagCut valido
       AddProjectMark()
       ' Eseguo
@@ -711,15 +801,15 @@ Public Class CurrentProjectPageUC
       Return True
    End Function
 
-   Friend Function ExportProject( sPath As String) As Boolean
+   Friend Function ExportProject(sPath As String) As Boolean
       ' Copio eventuale fotografia
       Dim nPhotoId As Integer = GetPhoto()
       If nPhotoId <> GDB_ID.NULL Then
          ' Path originale
          Dim sPhoto As String = String.Empty
-         EgtGetPhotoPath( nPhotoId, sPhoto)
+         EgtGetPhotoPath(nPhotoId, sPhoto)
          ' Nuova path
-         Dim sNewPhoto As String = Path.ChangeExtension( sPath, Path.GetExtension( sPhoto))
+         Dim sNewPhoto As String = Path.ChangeExtension(sPath, Path.GetExtension(sPhoto))
          ' Se diverse, eseguo copia
          If Not String.Equals(sPhoto, sNewPhoto, StringComparison.InvariantCultureIgnoreCase) Then
             Try
@@ -734,7 +824,7 @@ Public Class CurrentProjectPageUC
       ' Se assente, inserisco contrassegno di progetto OmagCut valido
       AddProjectMark()
       ' Eseguo copia
-      Return SaveFile( sPath)
+      Return SaveFile(sPath)
    End Function
 
    Friend Function GetCurrentProject() As Integer
@@ -821,7 +911,7 @@ Public Class CurrentProjectPageUC
          EgtSetName(nMarkId, NAME_PROJMARK)
          EgtSetLevel(nMarkId, GDB_LV.SYSTEM)
          EgtSetInfo(nMarkId, INFO_REDUCEDCUT, nReducedCut)
-      ' altrimenti, aggiorno il flag dei tagli ridotti
+         ' altrimenti, aggiorno il flag dei tagli ridotti
       Else
          Dim nMarkReducedCut As Integer = 0
          If Not EgtGetInfo(nMarkId, INFO_REDUCEDCUT, nMarkReducedCut) OrElse nMarkReducedCut <> nReducedCut Then
@@ -977,10 +1067,16 @@ Public Class CurrentProjectPageUC
    End Sub
 
    Friend Sub UpdateMachiningTxBx()
-      MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSawing
+      ' se macchina waterjet e senza uscita lama allora visualizzo info WJ
+      If m_MainWindow.m_CurrentMachine.bWaterJet And EgtGetHeadId("H1") = GDB_ID.NULL Then
+         MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrWaterJetting
+         '& "-" & m_MainWindow.m_CurrentMachine.sCurrWaterJettingQuality
+      Else
+         MachiningTxBx.Text = m_MainWindow.m_CurrentMachine.sCurrSawing
+      End If
    End Sub
 
-  ' Gestione fotografia della lastra (compreso riconoscimento contorno)
+   ' Gestione fotografia della lastra (compreso riconoscimento contorno)
 
    Friend Function LoadPhoto(sPath As String) As Boolean
       ' Verifico esistenza file immagine
@@ -1274,23 +1370,23 @@ Public Class CurrentProjectPageUC
 
    ' Gestione area pezzi totale e area pezzi da produrre
 
-   Friend Function SetTotalArea( dTotArea As Double) As Boolean
+   Friend Function SetTotalArea(dTotArea As Double) As Boolean
       Dim nMarkId As Integer = AddProjectMark()
       Return EgtSetInfo(nMarkId, INFO_TOTAREA, dTotArea)
    End Function
 
-   Friend Function UpdateTotalArea( dNewArea As Double) As Boolean
+   Friend Function UpdateTotalArea(dNewArea As Double) As Boolean
       Dim nMarkId As Integer = AddProjectMark()
       Dim dTotArea As Double = 0
-      EgtGetInfo( nMarkId, INFO_TOTAREA, dTotArea)
-      dTotArea = Math.Max( dTotArea + dNewArea, 0)
+      EgtGetInfo(nMarkId, INFO_TOTAREA, dTotArea)
+      dTotArea = Math.Max(dTotArea + dNewArea, 0)
       Return EgtSetInfo(nMarkId, INFO_TOTAREA, dTotArea)
    End Function
 
    Friend Function GetTotalArea() As Double
       Dim nMarkId As Integer = AddProjectMark()
       Dim dTotArea As Double = 0
-      EgtGetInfo( nMarkId, INFO_TOTAREA, dTotArea)
+      EgtGetInfo(nMarkId, INFO_TOTAREA, dTotArea)
       Return dTotArea
    End Function
 
@@ -1298,17 +1394,17 @@ Public Class CurrentProjectPageUC
       Dim dToProdArea As Double = 0
       ' Se programma non ancora inviato al CN, ciclo sui pezzi nella lastra
       If GetProjectNcProgSent() = 0 Then
-         Dim nPartInRawId As Integer = EgtGetFirstPartInRawPart( CamAuto.GetCurrentRaw())
+         Dim nPartInRawId As Integer = EgtGetFirstPartInRawPart(CamAuto.GetCurrentRaw())
          While nPartInRawId <> GDB_ID.NULL
-            dToProdArea += GeomCalc.GetPartArea( nPartInRawId)
-            nPartInRawId = EgtGetNextPartInRawPart( nPartInRawId)
+            dToProdArea += GeomCalc.GetPartArea(nPartInRawId)
+            nPartInRawId = EgtGetNextPartInRawPart(nPartInRawId)
          End While
       End If
       ' Ciclo sui pezzi in parcheggio
       Dim nPartId As Integer = EgtGetFirstPart()
       While nPartId <> GDB_ID.NULL
-         dToProdArea += GeomCalc.GetPartArea( nPartId)
-         nPartId = EgtGetNextPart( nPartId)
+         dToProdArea += GeomCalc.GetPartArea(nPartId)
+         nPartId = EgtGetNextPart(nPartId)
       End While
       Dim nMarkId As Integer = AddProjectMark()
       Return EgtSetInfo(nMarkId, INFO_TOPRODAREA, dToProdArea)
@@ -1317,16 +1413,16 @@ Public Class CurrentProjectPageUC
    Friend Function GetToProduceArea() As Double
       Dim nMarkId As Integer = AddProjectMark()
       Dim dToProdArea As Double = 0
-      EgtGetInfo( nMarkId, INFO_TOPRODAREA, dToProdArea)
+      EgtGetInfo(nMarkId, INFO_TOPRODAREA, dToProdArea)
       Return dToProdArea
    End Function
 
    Friend Sub ShowAreas()
       ' Recupero il gruppo di Mark e lo svuoto
       Dim nMarkId As Integer = AddProjectMark()
-      EgtEmptyGroup( nMarkId)
+      EgtEmptyGroup(nMarkId)
       ' Se non sono da visualizzare esco
-      if GetPrivateProfileInt( S_STATISTICS, K_SHOWAREAS, 0, m_MainWindow.GetMachIniFile()) = 0 Then Return
+      If GetPrivateProfileInt(S_STATISTICS, K_SHOWAREAS, 0, m_MainWindow.GetMachIniFile()) = 0 Then Return
       ' Recupero dati
       Dim dTotArea As Double = GetTotalArea()
       Dim dToProdArea As Double = GetToProduceArea()
@@ -1338,23 +1434,29 @@ Public Class CurrentProjectPageUC
       End If
       ' Scritte
       Const TEXT_DIST As Double = 100
-      Dim ptIns As New Point3d( b3Tab.Center().x, b3Tab.Max().y + TEXT_DIST, b3Tab.Max().z)
+      Dim ptIns As New Point3d(b3Tab.Center().x, b3Tab.Max().y + TEXT_DIST, b3Tab.Max().z)
       Dim dCoeff As Double = 1.0 / 1000000.0
       Dim sUnit As String = " m²"
       If Not EgtUiUnitsAreMM() Then
-         dCoeff = 1.0 / ( 12 * ONEINCH * 12 * ONEINCH)
+         dCoeff = 1.0 / (12 * ONEINCH * 12 * ONEINCH)
          sUnit = " ft²"
       End If
-      Dim sText As String = EgtMsg( 90328) & " " & DoubleToString( dTotArea * dCoeff, 3) & sUnit &  "   " &
-                            EgtMsg( 90329) & " " & DoubleToString( dToProdArea * dCoeff, 3) & sUnit
-      Dim nText As Integer = EgtCreateTextAdv( nMarkId, ptIns, 0, sText, "", 500, False, 100, 1, 0, INS_POS.MC)
-      EgtSetColor( nText, New Color3d( 0, 0, 0))
+      Dim sText As String = EgtMsg(90328) & " " & DoubleToString(dTotArea * dCoeff, 3) & sUnit & "   " &
+                            EgtMsg(90329) & " " & DoubleToString(dToProdArea * dCoeff, 3) & sUnit
+      Dim nText As Integer = EgtCreateTextAdv(nMarkId, ptIns, 0, sText, "", 500, False, 100, 1, 0, INS_POS.MC)
+      EgtSetColor(nText, New Color3d(0, 0, 0))
    End Sub
-
-   Friend Sub SetAreasStatus( bShow As Boolean)
+   Friend Sub SetAreasStatus(bShow As Boolean)
       Dim nMarkId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK)
       If nMarkId = GDB_ID.NULL Then Return
-      EgtSetStatus( nMarkId, If( bShow, GDB_ST.ON_, GDB_ST.OFF))
+
+      ' Disabilito impostazione modificato
+      Dim bOldEnMod As Boolean = EgtGetEnableModified()
+      If bOldEnMod Then EgtDisableModified()
+      ' Cambio stato visualizzazione
+      EgtSetStatus(nMarkId, If(bShow, GDB_ST.ON_, GDB_ST.OFF))
+      ' Se necessario riabilito impostazione modificato
+      If bOldEnMod Then EgtEnableModified()
    End Sub
 
    ' Gestione messaggi in interfaccia
@@ -1381,7 +1483,8 @@ Public Class CurrentProjectPageUC
 
    Friend Sub ClearMessage()
       OutMessageBrd.Background = Brushes.Transparent
-      OutMessageBrd.Visibility = Windows.Visibility.Hidden
+      OutMessageTxBl.Text = ""
+      'OutMessageBrd.Visibility = Windows.Visibility.Hidden
    End Sub
 
 End Class

Project/OpenPageUC.xaml

@@ -6,33 +6,40 @@
    xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"          
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="OpenPage_Initialized" Loaded="OpenPage_Loaded" Unloaded="OpenPage_Unloaded">
-      
-   <!-- Definizione della OpenPage -->
-   <Border>
-      <Grid Name="OpenPageGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="3*"/>
-            <ColumnDefinition Width="12*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="8*"/>
+
+    <!-- Definizione della OpenPage -->
+    <Border>
+        <Grid Name="OpenPageGrid" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="3*"/>
+                <ColumnDefinition Width="12*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="8*"/>
                 <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
-         
-         <!-- Definizione della Grid Superiore -->
-         <Grid Name="UpperButtonsGrid" Grid.Column="1" Grid.RowSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="5*"/>
-               <ColumnDefinition Width="7*"/>
-            </Grid.ColumnDefinitions>
-       
-         </Grid>
 
-         <TextBlock Name="FilePathTxBl" Grid.Row="0" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            
-          <Grid Grid.Row="1" Grid.RowSpan="2">
+            <!-- Definizione della Grid Superiore -->
+            <Grid Name="UpperButtonsGrid" Grid.Column="1" Grid.RowSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="5*"/>
+                    <ColumnDefinition Width="7*"/>
+                </Grid.ColumnDefinitions>
+
+            </Grid>
+
+            <Grid Name="SceneHostGrid" Grid.Row="2" Grid.Column="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="6*"/>
+                    <ColumnDefinition Width="1.2*"/>
+                </Grid.ColumnDefinitions>
+            </Grid>
+
+            <TextBlock Name="FilePathTxBl" Grid.Row="0" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+
+            <Grid Grid.Row="1" Grid.RowSpan="2">
                 <Grid.RowDefinitions>
                     <RowDefinition Height="6.5*"/>
                     <RowDefinition Height="0.65*"/>
@@ -53,39 +60,39 @@
                 </Grid>
 
             </Grid>
-          
-         <Border Name="MessageBrd" Grid.Row="3" BorderThickness="0,1,0,0" BorderBrush="Gray">
-            <TextBlock Name="MessageTxBx"  TextAlignment="Center"
+
+            <Border Name="MessageBrd" Grid.Row="3" BorderThickness="0,1,0,0" BorderBrush="Gray">
+                <TextBlock Name="MessageTxBx"  TextAlignment="Center"
                    Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-         </Border>
-         
-         <!-- Definizione della Grid Inferiore per i Button V e X -->
-         <Grid Name="BottomButtonsGrid" Grid.Column="1" Grid.Row="3">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="6*"/>
-               <ColumnDefinition Width="3*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+            </Border>
 
-            <Button Name="BarCodeBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+            <!-- Definizione della Grid Inferiore per i Button V e X -->
+            <Grid Name="BottomButtonsGrid" Grid.Column="1" Grid.Row="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="6*"/>
+                    <ColumnDefinition Width="3*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="BarCodeBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
                     <Image Source="{DynamicResource BarCodeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
+                </Button>
 
-            <Button Name="OkBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
+                <Button Name="OkBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
             VerticalAlignment="Center" />
-            </Button>
-            <Button Name="ExitBtn" Grid.Column="4" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource XImg}" Width="65" Height="65" HorizontalAlignment="Center"
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="4" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Width="65" Height="65" HorizontalAlignment="Center"
             VerticalAlignment="Center" />
-            </Button>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
 
-         </Grid>
-         
-      </Grid>
-      
-   </Border>
-   
 </UserControl>

Project/OpenPageUC.xaml.vb

@@ -5,6 +5,7 @@ Public Class OpenPageUC
 
    'Riferimento alla MainWindow
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_SelParkInd As SelParkIndWD
 
    'Dichiarazione dello UserControl SceneButtons
    Private m_SceneButtons As SceneButtonsUC
@@ -35,11 +36,12 @@ Public Class OpenPageUC
 
       ' Assegnazione scena all'host e posizionamento nella OpenPageGrid
       OpenSceneHost.Child = OpenScene
-      OpenSceneHost.SetValue(Grid.ColumnProperty, 1)
-      OpenSceneHost.SetValue(Grid.RowProperty, 2)
+      OpenSceneHost.SetValue(Grid.ColumnProperty, 0) '1
+      OpenSceneHost.SetValue(Grid.RowProperty, 0) ' 2
       ' OpenSceneHost.SetValue(Grid.RowSpanProperty, 1)
       OpenSceneHost.SetValue(Grid.ColumnSpanProperty, 2)
-      Me.OpenPageGrid.Children.Add(OpenSceneHost)
+      'Me.OpenPageGrid.Children.Add(OpenSceneHost)
+      SceneHostGrid.Children.Add(OpenSceneHost)
 
       ' Definizione del collegamento tra ItemList e ListBox1
       FileListBox.ItemsSource = m_MainWindow.m_OpenItemList
@@ -100,6 +102,10 @@ Public Class OpenPageUC
          LoadCurrDir()
          m_bFirst = False
       Else
+         GetPrivateProfileString(S_SLABDXF, K_SLABLAYER, "SlabBoundary", m_sSlabLayer, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_SLABDXF, K_PARTSLAYER, "Counters", m_sPartsLayer, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_SLABDXF, K_SCRAPLAYER, "ReservedAreaBoundary", m_sScrapLayer, m_MainWindow.GetIniFile())
+         m_dSlabThick = GetPrivateProfileDouble(S_SLABDXF, K_STDTHICK, 20, m_MainWindow.GetIniFile())
          EgtSetCurrentContext(OpenScene.GetCtx())
       End If
       ' Pulisco tutto
@@ -237,6 +243,14 @@ Public Class OpenPageUC
    Private Function ClearView() As Boolean
       ' Pulisco il DB geometrico locale
       EgtNewFile()
+      ' Elimino elenco dei parcheggi
+      If Not IsNothing(m_SelParkInd) Then
+         OpenSceneHost.SetValue(Grid.ColumnSpanProperty, 2)
+         SceneHostGrid.Children.Remove(m_SelParkInd)
+         m_SelParkInd = Nothing
+      End If
+      ' Pulisco la selezione dei dati
+      SelParkIndWD.sActualProj = String.Empty
       ' Eseguo zoom
       OpenScene.ZoomAll()
       ' Cancello messaggio
@@ -298,6 +312,24 @@ Public Class OpenPageUC
          MessageBrd.Background = Brushes.Tomato
          OkBtn.IsEnabled = False
       End If
+
+      ' Recupero il percorso del progetto per caricare le immagini 
+      SelParkIndWD.sActualProj = sPath
+      Dim ListParkInd As New List(Of ParkInd)
+      SelParkIndWD.LoadParkInd(ListParkInd, OpenScene.GetCtx)
+      If ListParkInd.Count > 2 And GetPrivateProfileInt(S_GENERAL, K_ENABLEDXFPARK, 0, m_MainWindow.GetIniFile) <> 0 Then
+         m_SelParkInd = New SelParkIndWD(m_MainWindow, OpenScene.GetCtx)
+         OpenSceneHost.SetValue(Grid.ColumnSpanProperty, 1)
+         m_SelParkInd.SetValue(Grid.ColumnProperty, 1)
+         SceneHostGrid.Children.Add(m_SelParkInd)
+      Else
+         OpenSceneHost.SetValue(Grid.ColumnSpanProperty, 2)
+         If Not IsNothing(m_SelParkInd) Then
+            SceneHostGrid.Children.Remove(m_SelParkInd)
+            m_SelParkInd = Nothing
+         End If
+      End If
+
       ' Eseguo zoom
       OpenScene.ZoomAll()
       Return bOk
@@ -471,11 +503,21 @@ Public Class OpenPageUC
       ' Se file dxf devo processarlo opportunamente
       Dim bFileDxf As Boolean = (EgtGetFileType(m_sCurrFile) = FT.DXF)
       If bFileDxf Then AdjustSlabDxf()
+
       ' Istruzioni per chiudere OpenPageUC e aprire currentproject
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_OpenPage)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
       ' Lancio caricamento nuovo progetto corrente
       m_MainWindow.m_CadCutPageUC.m_ProjectMgr.PostLoad(m_sCurrDir, m_sCurrFile)
+
+      '--------------------------------------------------------------------------------
+      ' Gestione visulizzazione lista pezzi in parcheggio
+      Dim nProj As Integer = m_MainWindow.m_CurrentProjectPageUC.GetCurrentProject()
+      Dim sNewFileName As String = m_MainWindow.GetSaveDir() & "\" & Math.Abs(nProj).ToString("D4") & "_ParkInd_"
+      SelParkIndWD.CopyImgSvg(sNewFileName, OpenScene.GetCtx)
+      SelParkIndWD.sActualProj = String.Empty
+      '--------------------------------------------------------------------------------
+
       ' Se file dxf 
       If bFileDxf Then
          ' Applico le lavorazioni
@@ -491,12 +533,30 @@ Public Class OpenPageUC
       m_SceneButtons.MeasureBtn.IsChecked = False
       ' Istruzioni per chiudere OpenPageUC e aprire currentproject e cadcut page
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_OpenPage)
-      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+      If m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.CadCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
+            m_MainWindow.CadCutBtn.IsChecked = True
+         End If
+      ElseIf m_MainWindow.m_PrevActivePage = MainWindow.Pages.FrameCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.FrameCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
+            m_MainWindow.FrameCutBtn.IsChecked = True
+         End If
+      End If
       ' Non modifico progetto corrente
       m_MainWindow.m_ActivePage = m_MainWindow.m_PrevActivePage
    End Sub
 
    Private Sub OpenPage_Unloaded(sender As Object, e As RoutedEventArgs)
+      If Not IsNothing(m_SelParkInd) Then
+         SceneHostGrid.Children.Remove(m_SelParkInd)
+         m_SelParkInd = Nothing
+      End If
+      ' resetto il nome del progetto corrente
+      SelParkIndWD.sActualProj = String.Empty
    End Sub
 
 End Class

Project/ProjectMgrUC.xaml

@@ -43,9 +43,30 @@
             
             <ToggleButton Name="RegisterBtn"
                  Style="{DynamicResource OmagCut_YellowToggleButton}"></ToggleButton>
-           <Button Name="ResetCutBtn"
+
+            <Button Name="ResetCutBtn"
                  Style="{DynamicResource OmagCut_YellowTextButton}"></Button>
-           <!--Abilito la selezione delle linee da disegno-->
+
+            <Popup Name="ResetCutPopUp"
+                   IsOpen="False"
+                   AllowsTransparency="False"
+                   PopupAnimation="Scroll"
+                   StaysOpen="False"  
+                   Placement="Top"
+                   PlacementTarget="{Binding ElementName=ResetCutBtn}">
+                <WrapPanel Orientation="Vertical" 
+                           Background="{DynamicResource OmagCut_Gray}">
+                    <Button x:Name="ResetCut1Btn"
+                            Width ="78" Height="78"
+                            Style="{DynamicResource OmagCut_YellowTextButton}"></Button>
+                    <Button x:Name="ResetCut2Btn"
+                            Width ="78" Height="78"
+                            Style="{DynamicResource OmagCut_YellowTextButton}"></Button>
+                </WrapPanel>
+            </Popup>
+
+
+            <!--Abilito la selezione delle linee da disegno-->
             <ToggleButton Name="TestBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
                 <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </ToggleButton>

Project/ProjectMgrUC.xaml.vb

@@ -1,4 +1,7 @@
-Imports System.IO
+Imports System.ComponentModel
+Imports System.Drawing
+Imports System.IO
+Imports System.Windows.Forms.Integration
 Imports EgtUILib
 Imports EgtWPFLib
 
@@ -23,6 +26,8 @@ Public Class ProjectMgrUC
 
       RegisterBtn.Content = "REG"                              'Shape Registration
       ResetCutBtn.Content = EgtMsg(MSG_NESTPAGEUC + 6)         'Reset
+      ResetCut2Btn.Content = EgtMsg(91024)                     'Reset lavorazioni
+      ResetCut1Btn.Content = EgtMsg(91025)                     'Aggiorna feed/speed
       SimulateBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)       'Simulate - Simula
       If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
          WorkBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 10)       'Export - Esporta
@@ -30,6 +35,7 @@ Public Class ProjectMgrUC
          WorkBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 2)        'Work - Lavora
       End If
       TestBtn.ToolTip = EgtMsg(90255)                          'Test
+      ResetCutBtn.ToolTip = "Reset Cuts" & vbCrLf & "Other Reset (Shift)"
    End Sub
 
    Private Sub ProjectMgrUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -95,11 +101,42 @@ Public Class ProjectMgrUC
       End If
       ' Scelta tavola della macchina
       Dim nTabInd As Integer = ChooseTable()
+
+      ' Creo una copia di tutte le immagini usata nella lista dei parcheggi
+      Dim ListParkInd As New List(Of ParkInd)
+      SelParkIndWD.LoadParkInd(ListParkInd)
       ' Creo nuovo progetto
       m_CurrProjPage.NewProject(nTabInd, bRetainParkedParts)
+
+
+      ' Gestione visulizzazione lista pezzi in parcheggio
+      m_MainWindow.m_CadCutPageUC.m_NestPage.ReloadListParkInd()
+      Dim sNewFileName As String = SelParkIndWD.GetPathCurrProj()
+      SelParkIndWD.CopyImgSvg(sNewFileName)
+      'Dim Extension As String = ".svg"
+      'If Not MainWindow.m_bShowSVGParkInd Then Extension = ".png"
+      'For Each ItemParkInd As ParkInd In ListParkInd
+      '   If ItemParkInd.Ind <> 0 And ItemParkInd.Ind <> 999 And ItemParkInd.nPartInPark > 0 Then
+      '      Try
+      '         Dim sNewFile As String = sNewFileName & ItemParkInd.Ind.ToString & Extension
+      '         If MainWindow.m_bShowSVGParkInd Then
+      '            WriteMyXML(sNewFile, ItemParkInd.LocalMyCanvas)
+      '         Else
+      '            If File.Exists(sNewFile) Then
+      '               File.Delete(sNewFile)
+      '            End If
+      '            File.Copy(If(Extension = ".svg", ItemParkInd.Svg, ItemParkInd.Img), sNewFile)
+      '         End If
+      '      Catch ex As Exception
+      '         EgtOutLog("Copia immagine " & If(Extension = ".svg", ItemParkInd.Svg, ItemParkInd.Img) & " di ParkInd non roiscita")
+      '      End Try
+      '   End If
+      'Next
+      m_MainWindow.m_CadCutPageUC.m_NestPage.ReloadListParkInd()
+
+
       ' Gestione stato FastGrid
       m_MainWindow.m_CadCutPageUC.m_FastGridSlabManager.OnPostNewProject()
-      EgtZoom(ZM.ALL)
    End Sub
 
    Friend Function ChooseTable() As Integer
@@ -230,6 +267,9 @@ Public Class ProjectMgrUC
       If m_MainWindow.m_ActivePage = MainWindow.Pages.FrameCut Then
          ShowAllCurrPhaseMachinings()
       End If
+
+      'SelParkIndWD.UpdateViewOnParkInd(False)
+
       EgtDraw()
    End Sub
 
@@ -249,6 +289,25 @@ Public Class ProjectMgrUC
    End Sub
 
    Private Sub ResetCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCutBtn.Click
+      If (Keyboard.Modifiers And ModifierKeys.Shift) > 0 Then
+         If ResetCutPopUp.IsOpen Then
+            ResetCutPopUp.IsOpen = False
+         Else
+            ResetCutPopUp.IsOpen = True
+         End If
+      Else
+         ResetCut3Btn_Click()
+      End If
+   End Sub
+
+   ' Reimposto le feed di tutte le lavorazioni
+   Private Sub ResetCut1Btn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCut1Btn.Click
+      ' eseguo il ricalcolo delle sole FEED di lavorazione
+      UpdateFeedAllMachining()
+   End Sub
+
+   ' Reimposto le lavorazioni di default e ripristino i parametri
+   Private Sub ResetCut2Btn_Click(sender As Object, e As RoutedEventArgs) Handles ResetCut2Btn.Click
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Cancello eventuali messaggi
       m_CurrProjPage.ClearMessage()
@@ -258,10 +317,51 @@ Public Class ProjectMgrUC
       ResetAllStartCurv()
       ' cancello tutti i ponticelli disegnati
       ResetAllBRidges()
+      ' cancella tutti i tagli di separazione inseriti in OFFICE
+      ResetAllSplitCut()
+
+      ' assegno la lavorazione corrente per i tagli di lama inclinati (solo se specificato nella ComboBox della ChooseMachinig)
+      RestoreDef_Machinig(True)
+      ' assegno la lavorazione corrente per i tagli verticali
+      RestoreDef_Machinig(False)
+
       ' Ricalcolo tutte le lavorazioni
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
       If nWarn = 1 Then m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SPLITPAGEUC + 11)) ' Lama troppo grande per utilizzo ventosa
+      ' Se eistono elimino i grezzi delle fasi che non contengono lavorazioni
+      ResetAllRawPart()
+      ' Aggiorno Info C Home
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHome, 0))
+      ' Aggiorno visualizzazione
+      EgtDraw()
+   End Sub
+
+   ' Resetta i valori dei parametri (ma non le lavorazioni)
+   Private Sub ResetCut3Btn_Click()
+      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
+      ' Cancello eventuali messaggi
+      m_CurrProjPage.ClearMessage()
+      ' cancello tutti i tagli di separazione (Waterjet)
+      ResetAllSplitCurv()
+      ' cancello tutti i punti di inizio (Waterjet)
+      ResetAllStartCurv()
+      ' cancello tutti i ponticelli disegnati
+      ResetAllBRidges()
+      ' cancella tutti i tagli di separazione inseriti in OFFICE
+      ResetAllSplitCut()
+      ' Ricalcolo tutte le lavorazioni
+      Dim nWarn As Integer = 0
+      ResetAllMachinings(nWarn)
+      If nWarn = 1 Then m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SPLITPAGEUC + 11)) ' Lama troppo grande per utilizzo ventosa
+      ' Se eistono elimino i grezzi delle fasi che non contengono lavorazioni
+      ResetAllRawPart()
+      ' Aggiorno Info C Home
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHome, 0))
       ' Aggiorno visualizzazione
       EgtDraw()
    End Sub
@@ -298,47 +398,117 @@ Public Class ProjectMgrUC
          Dim m_ptRawMax, m_ptRawMin As Point3d
          If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then Return
          Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
+
          ' Recupero spessore lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         EgtTdbSetCurrTool(sSaw)
+         Dim TestToolWD As New ChooseTestToolWD(m_MainWindow)
+         TestToolWD.ShowDialog()
+         If Not TestToolWD.DialogResult Then Return
+         Dim CurrTestTool As TestTool = TestToolWD.GetSelectedTool
+
+         'Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         'EgtTdbSetCurrTool(sSaw)
+
          Dim dThick As Double = 0
-         EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
-         Dim dDiam As Double = 0
-         EgtTdbGetCurrToolParam(MCH_TP.DIAM, dDiam)
+         Dim dHeight As Double = 0
+         If CurrTestTool.ToolIsSaw Then
+            ' Spessore LAMA
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+            ' Diametro
+            EgtTdbGetCurrToolParam(MCH_TP.DIAM, dHeight)
+            ' Raggio lama
+            dHeight = dHeight / 2
+         ElseIf CurrTestTool.ToolIsLaser Then
+            ' Raggio
+            dThick = 0
+            dHeight = 0
+         Else
+            ' Diametro FRESA/FORETTO (l'altezza non serve: posizione calcolata tiene conto del Tip Tool)
+            EgtTdbGetCurrToolParam(MCH_TP.DIAM, dThick)
+            ' Raggio
+            dThick = dThick / 2
+         End If
+
+
          'recupero il lato selezionato 
          Dim nIdSelected As Integer = m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv
          If nIdSelected = -1 Then Return
-         ' recupero gli estremi del latovda tagliare
-         Dim ptStart As Point3d
-         EgtStartPoint(nIdSelected, GDB_ID.ROOT, ptStart)
-         Dim ptEnd As Point3d
-         EgtEndPoint(nIdSelected, GDB_ID.ROOT, ptEnd)
-         Dim vtDirLine As Vector3d = ptEnd - ptStart
-         ' calcolo il versore perpendicolare alla linea di taglio (diretto verso l'interno del pezzo)
+         ' recupero il vettore nel punto medio dell'entità
+         Dim vtDirLine As Vector3d
+         EgtMidVector(nIdSelected, GDB_ID.ROOT, vtDirLine)
+
+         ' calcolo il versore della linea di taglio
          Dim vtDirT As Vector3d = vtDirLine
          vtDirT.Normalize()
-         vtDirT.Rotate(Vector3d.Z_AX, 90)
+         ' calcolo la direzione di offset da applicare all'utensile
+         Dim vtOffset As New Vector3d(vtDirT.x, vtDirT.y, vtDirT.z)
+         vtOffset.Rotate(Vector3d.Z_AX, 90)
+
+         If CurrTestTool.ToolIsSaw Then
+            ' calcolo il versore perpendicolare alla linea di taglio (diretto verso l'interno del pezzo)
+            vtDirT.Rotate(Vector3d.Z_AX, 90)
+         Else
+            ' calcolo il versore perpendicolare alla linea di taglio (diretto verso l'interno del pezzo)
+            vtDirT.Rotate(Vector3d.Z_AX, 90)
+            ' calcolo il versore perpendicolare al piano di taglio (diretto verso l'interno dell'utensile)
+            vtDirT.Rotate(vtDirLine, 90)
+         End If
 
          ' Calcolo punto di posizionamemto (punto medio)
          Dim ptMid, m_ptTabOri As Point3d
 
          If Not EgtGetTableRef(1, m_ptTabOri) Then Return
-         ptMid.x = (ptEnd.x + ptStart.x) / 2
-         ptMid.y = (ptEnd.y + ptStart.y) / 2
-         ptMid.z = (ptEnd.z + ptStart.z) / 2 + dDiam / 2
-         ptMid -= vtDirT * dThick
+         ' recupero il punto medio della curva
+         EgtMidPoint(nIdSelected, GDB_ID.ROOT, ptMid)
+         ptMid.z = m_ptTabOri.z + CamAuto.GetRawHeight() + dHeight + m_MainWindow.m_CurrentMachine.dAdditionalTable
+         ' Offset dovuto allo spessore Utensile
+         ptMid -= vtOffset * dThick
 
          '--------------------------- Imposto la posizione della macchina ----------------------------
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+
+         ' Imposto la lama corrente, preso dalla scelta precedente
+         'If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         If Not EgtSetCalcTool(CurrTestTool.ToolName, CurrTestTool.ToolHead, CurrTestTool.ToolExit) Then Return
 
          ' calcolo la posizione degli assi rotanti C, B
          Dim nStat As Integer
          Dim dC1, dB1, dC2, dB2 As Double
-         EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
+         If CurrTestTool.ToolIsSaw Then
+            ' Se LAMA
+            EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
+         ElseIf CurrTestTool.ToolIsLaser Then
+            ' Se LASER
+            Dim dHomeC As Double = 90
+            EgtGetAxisHomePos("C", dHomeC)
+            Dim vtPrefAuxDir As Vector3d = -Vector3d.X_AX()
+            vtPrefAuxDir.Rotate(Vector3d.Z_AX, dHomeC)
+            EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+            ' Forzo B90
+            dB1 = 90
+            ' Forzo la pozione in Z alla quota di Home (per evitare l'errore di fine corsa asse Z)
+            Dim dHomeZ As Double = 0
+            EgtGetAxisHomePos("Z", dHomeZ)
+            ptMid.z = dHomeZ
+         Else
+            ' Se utensile speciale
+            If CurrTestTool.ToolType = MCH_TY.MILL_STD Or CurrTestTool.ToolType = MCH_TY.DRILL_STD Then
+               ' Se FRESA/FORETTO
+               Dim nStepRotC As Integer = GetPrivateProfileInt(S_NEST, K_MACH_DRILL_MILL_C90, 1, m_MainWindow.GetMachIniFile())
+               Dim vtPrefAuxDir As Vector3d = -Vector3d.X_AX()
+               vtPrefAuxDir.Rotate(Vector3d.Z_AX, 90 * nStepRotC)
+               EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+            ElseIf CurrTestTool.ToolType = MCH_TY.WATERJET Then
+               ' Se WJ
+               Dim dHomeC As Double = 90
+               EgtGetAxisHomePos("C", dHomeC)
+               Dim vtPrefAuxDir As Vector3d = Vector3d.X_AX()
+               vtPrefAuxDir.Rotate(Vector3d.Z_AX, dHomeC)
+               EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+            End If
+         End If
+
          ' calcolo la posizione degli assi lineari X, Y, Z
          Dim dX, dY, dZ As Double
          EgtGetCalcPositions(ptMid, dC1, dB1, nStat, dX, dY, dZ)
@@ -346,16 +516,49 @@ Public Class ProjectMgrUC
          ' verifica assi lineari
          EgtVerifyOutstroke(dX, dY, dZ, dC1, dB1, nStat)
          If nStat <> 0 Then
+            EgtOutLog("Out of stroke: " & nStat)
             vtDirT = -vtDirT
             ptMid -= vtDirT * dThick
-            EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
+            If CurrTestTool.ToolIsSaw Then
+               EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
+            ElseIf CurrTestTool.ToolIsLaser Then
+               ' Se LASER
+               Dim dHomeC As Double = 90
+               EgtGetAxisHomePos("C", dHomeC)
+               Dim vtPrefAuxDir As Vector3d = -Vector3d.X_AX()
+               vtPrefAuxDir.Rotate(Vector3d.Z_AX, dHomeC)
+               EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+               ' Forzo B90
+               dB1 = 90
+            Else
+               If CurrTestTool.ToolType = MCH_TY.MILL_STD Or CurrTestTool.ToolType = MCH_TY.DRILL_STD Then
+                  ' Se FRESA/FORETTO
+                  Dim nStepRotC As Integer = GetPrivateProfileInt(S_NEST, K_MACH_DRILL_MILL_C90, 1, m_MainWindow.GetMachIniFile())
+                  Dim vtPrefAuxDir As Vector3d = -Vector3d.X_AX()
+                  vtPrefAuxDir.Rotate(Vector3d.Z_AX, 90 * nStepRotC)
+                  EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+               ElseIf CurrTestTool.ToolType = MCH_TY.WATERJET Then
+                  ' Se WJ
+                  Dim dHomeC As Double = 90
+                  EgtGetAxisHomePos("C", dHomeC)
+                  Dim vtPrefAuxDir As Vector3d = Vector3d.X_AX()
+                  vtPrefAuxDir.Rotate(Vector3d.Z_AX, dHomeC)
+                  EgtGetCalcAngles(vtDirT, vtPrefAuxDir, nStat, dC1, dB1, dC2, dB2)
+               End If
+            End If
             ' calcolo la posizione degli assi lineari X, Y, Z ( correggere il punto ptMid.z sommando il raggio utensile)
             EgtGetCalcPositions(ptMid, dC1, dB1, nStat, dX, dY, dZ)
+
+            ' verifica assi lineari
+            EgtVerifyOutstroke(dX, dY, dZ, dC1, dB1, nStat)
+            If nStat <> 0 Then
+               EgtOutLog("2nd attemp out of stroke: " & nStat)
+            End If
          End If
 
          '--------------------------- Comunico i movimenti in origine macchina al CN ----------------------------------------
-         Dim ptMachine As Point3d = New Point3d(dX, dY, dZ)
-         ExecuteCommandCNC(ptMachine, dC1, dB1)
+         Dim ptMachine As Point3d = New Point3d(dX, dY, If(CurrTestTool.ToolIsLaser, 0, dZ))
+         ExecuteCommandCNC(ptMachine, dC1, dB1, CurrTestTool)
          Return
       End If
       ' ---------------------------- Fine modalità test --------------------------------------------
@@ -478,7 +681,6 @@ Public Class ProjectMgrUC
       If Not (m_CurrMachine.bProdLine Or m_CurrMachine.bDemo) Then
          ' Download programma (eventuali errori sono segnalati dalla funzione)
          If m_CurrNcComm.SendProgram(sCncPath, 900) Then
-            ' copio il progetto corrente come progetto in lavorazione
             Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
             My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
             ' se abilitato e non è restart, lancio eventuale lua post-trasmissione
@@ -504,7 +706,6 @@ Public Class ProjectMgrUC
             ' apro la finestra con l'elenco degli sfridi
             Dim MyScrapsWD As New ScrapsWD(m_MainWindow, Me, NewScrapsList)
             MyScrapsWD.ShowDialog()
-
          End If
          ' ------------------ FINE gestione SCRAPS -----------------------------
 
@@ -574,6 +775,13 @@ Public Class ProjectMgrUC
                   EgtDraw()
                   ' Dichiaro che il progetto è nuovo
                   bAlreadySent = False
+                  ' reimposto tutti gli sfridi come nuovi sfridi
+                  Dim CurrScrapsList As New List(Of Scrap)
+                  ' procedo all'aggiornamento della lista degli sfridi
+                  UpDateScrapList(CurrScrapsList)
+                  For Each ItemScrap As Scrap In CurrScrapsList
+                     ItemScrap.ResetState()
+                  Next
                End If
             End If
             If bAlreadySent Then
@@ -584,6 +792,18 @@ Public Class ProjectMgrUC
             End If
          End If
 
+         ' ------------------ INIZIO gestione SCRAPS ---------------------------
+         Dim NewScrapsList As New List(Of Scrap)
+         ' procedo all'aggiornamento della lista degli sfridi
+         UpDateScrapList(NewScrapsList)
+         ' se esiste almeno uno sfrido da inserire come nuovo grezzo
+         If NewScrapsList.Count > 0 Then
+            ' apro la finestra con l'elenco degli sfridi
+            Dim MyScrapsWD As New ScrapsWD(m_MainWindow, Me, NewScrapsList)
+            MyScrapsWD.ShowDialog()
+         End If
+         ' ------------------ FINE gestione SCRAPS -----------------------------
+
          ' Se non collegato alla macchina
          If Not m_MainWindow.m_bNCLink Then
             ' salvo il progetto corrente incrementando il valore del progetto
@@ -623,6 +843,12 @@ Public Class ProjectMgrUC
                Exit For
             End If
          Next
+
+         ' leggo il nome della tavola da cui sto lanciando il progetto 
+         Dim sTabeName As String = String.Empty
+         EgtGetTableName(sTabeName)
+         Dim bDoubleProg As Boolean = (GetPrivateProfileInt(S_PRODUCTIONLINE, "DoubleProg", 0, m_MainWindow.GetMachIniFile()) <> 0)
+
          ' Leggo eventuale variabile per lavorazione con 2 tavole in parallelo (standard E80027)
          Dim nVarProgTwins As Integer = 1
          If Not String.IsNullOrWhiteSpace(m_CurrMachine.sVarProgTwins) Then
@@ -636,8 +862,26 @@ Public Class ProjectMgrUC
                End If
             Next
          End If
+
          ' Verifico se posso scrivere nell'area 1
-         If nVarProg1 = 0 And (nVarProg2 <> 1 Or nVarProgTwins = 2) Then
+         Dim bSendToAre1 As Boolean = (nVarProg1 = 0 And (nVarProg2 <> 1 Or nVarProgTwins = 2))
+         Dim bSendToAre2 As Boolean = (nVarProg2 = 0 And (nVarProg1 <> 1 Or nVarProgTwins = 2))
+
+         If bDoubleProg Then
+            If sTabeName = MAIN_TAB Then
+               ' spedisco il programma da tavola 1 solo se CN ha terminato programma 901
+               bSendToAre1 = (nVarProg1 = 0)
+               bSendToAre2 = False
+               EgtOutLog(" Invio programma da tavola 1")
+            Else
+               ' spedisco il programma da tavola 2 solo se CN ha terminato programma 902
+               bSendToAre1 = False
+               bSendToAre2 = (nVarProg2 = 0)
+               EgtOutLog(" Invio programma da tavola 2")
+            End If
+         End If
+
+         If bSendToAre1 Then
             m_CurrNcComm.SetProgramMainOrSub(False)
             If m_CurrNcComm.SendProgram(sCncPath, m_CurrMachine.nProg1, False) Then
                ' Dichiaro part program inviato
@@ -654,7 +898,7 @@ Public Class ProjectMgrUC
             End If
             m_CurrNcComm.SetProgramMainOrSub(True)
             ' Altrimenti verifico se posso scrivere nell'area 2
-         ElseIf nVarProg2 = 0 And (nVarProg1 <> 1 Or nVarProgTwins = 2) Then
+         ElseIf bSendToAre2 Then
             m_CurrNcComm.SetProgramMainOrSub(False)
             If m_CurrNcComm.SendProgram(sCncPath, m_CurrMachine.nProg2, False) Then
                ' Dichiaro part program inviato
@@ -674,6 +918,12 @@ Public Class ProjectMgrUC
          Else
             m_CurrProjPage.SetErrorMessage(EgtMsg(90318))       'La macchina non accetta il programma CN
          End If
+         ' avvio programma solo se DoubleProg
+         If (GetPrivateProfileInt(S_GENERAL, K_STARTPROGRAM, 0, m_MainWindow.GetIniFile()) <> 0 And bDoubleProg) And
+            (bSendToAre1 Or bSendToAre2) Then
+            Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
+            MyCicloStartWD.ShowDialog()
+         End If
 
       End If
 #End If
@@ -705,8 +955,114 @@ Public Class ProjectMgrUC
       End While
    End Sub
 
+   Public Sub UpdateFeedAllMachining()
+      ' recupero il valore di Feed della lavorazione corrente
+      Dim sMachiningName As String = String.Empty
+      If Not EgtMdbGetCurrMachiningParam(MCH_MP.NAME, sMachiningName) Then
+         ' errore: lavorazione non trovata
+         EgtOutLog(" - Prima di 'Reset Feed' accedere alla pagina MACCHINA!")
+         'm_MainWindow.m_CurrentProjectPageUC.SetErrorMessage("Salvare la lavorazione corrente")
+         Return
+      End If
+      Dim dFeed As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.FEED, dFeed)
+      Dim dFeedStarted As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.STARTFEED, dFeedStarted)
+      Dim dFeedEnded As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.ENDFEED, dFeedEnded)
+      Dim dFeedTipped As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.TIPFEED, dFeedTipped)
+      Dim dFeedBack As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.BACKFEED, dFeedBack)
+      Dim dFeedSideAng As Double = 0
+      EgtMdbGetCurrMachiningParam(MCH_MP.SIDEANGFEED, dFeedSideAng)
+      Dim MachiningList As New List(Of SplitMach)
+
+      ' Recupero l'indice della fase corrente
+      Dim nCurrPhase As Integer = 1
+      ' recupero in numero di fasi presenti nel progetto
+      Dim nCountPhase As Integer = EgtGetPhaseCount()
+      ' ciclo su tutte le fasi di lavorazione
+      Dim nMach As Integer = 0
+      Dim nMachUpdated As Integer = 0
+      For IndexPhase As Integer = 1 To nCountPhase
+         ' imposto la fase corrente
+         nCurrPhase = IndexPhase
+         ' Preparo la lista delle lavorazioni
+         CalculateSplitMachList(nCurrPhase, MachiningList)
+         ' per ogni lavorazione corrente procedo ad aggiornare la feed
+         For IndexMachining As Integer = 0 To MachiningList.Count - 1
+            nMach += 1
+            Dim nOperId As Integer = MachiningList(IndexMachining).m_nId
+            ' setto la lavorazione come corrente
+            If EgtSetCurrMachining(nOperId) Then
+               Dim bUpdate As Boolean = False
+               ' STANDARD
+               Dim dOrigFeed As Double
+               EgtGetMachiningParam(MCH_MP.FEED, dOrigFeed)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeed - dFeed) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.FEED, dFeed)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' STARTED
+               Dim dOrigFeedStarted As Double
+               EgtGetMachiningParam(MCH_MP.STARTFEED, dOrigFeedStarted)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedStarted - dFeedStarted) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.STARTFEED, dFeedStarted)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' ENDED
+               Dim dOrigFeedEnded As Double
+               EgtGetMachiningParam(MCH_MP.ENDFEED, dOrigFeedEnded)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedEnded - dFeedEnded) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.ENDFEED, dFeedEnded)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' TIPPED
+               Dim dOrigFeedTipped As Double
+               EgtGetMachiningParam(MCH_MP.TIPFEED, dOrigFeedTipped)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedTipped - dFeedTipped) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.TIPFEED, dFeedTipped)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' BACK
+               Dim dOrigFeedBack As Double
+               EgtGetMachiningParam(MCH_MP.BACKFEED, dOrigFeedBack)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedBack - dFeedBack) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.BACKFEED, dFeedBack)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' SIDEANG
+               Dim dOrigFeedSideAng As Double
+               EgtMdbGetCurrMachiningParam(MCH_MP.SIDEANGFEED, dOrigFeedSideAng)
+               ' imposto il valore di Feed solo se differente da quello nuovo
+               If Math.Abs(dOrigFeedBack - dFeedSideAng) > 0.1 Then
+                  bUpdate = bUpdate Or EgtSetMachiningParam(MCH_MP.SIDEANGFEED, dFeedSideAng)
+                  ' aggiorno la lavorazione (senza il ricalcolo dell'intera lavorazione)
+                  EgtApplyMachining(True)
+               End If
+               ' conto il numero di lavorazioni aggiornate
+               If bUpdate Then
+                  nMachUpdated += 1
+               End If
+            End If
+         Next
+      Next
+      m_MainWindow.m_CurrentProjectPageUC.SetInfoMessage("Lavorazione aggiornate: " & nMachUpdated & "/ " & nMach)
+   End Sub
+
    ' ------------------------------------------------ GENERA COMANDI CNC MOVIMENTO ------------------------------------------------
-   Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double)
+   Private Sub ExecuteCommandCNC(ptMid As Point3d, dAngC As Double, dAngB As Double, SelTestTool As TestTool)
 
       Dim CmdString As String = String.Empty
       If Not EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\TestWork.lua") Then
@@ -732,12 +1088,23 @@ Public Class ProjectMgrUC
       EgtLuaSetGlobNumVar("CMD.R1", dR1)
       EgtLuaSetGlobNumVar("CMD.R2", dR2)
 
-      ' Recupero spessore lama corrente
-      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-      EgtTdbSetCurrTool(sSaw)
+      '' Recupero spessore lama corrente
+      'Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      'EgtTdbSetCurrTool(sSaw)
+      'Dim dThick As Double = 0
+      'EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      'EgtLuaSetGlobNumVar("CMD.SAWTH", dThick)
+
+      EgtTdbSetCurrTool(SelTestTool.ToolName)
+      EgtLuaSetGlobStringVar("CMD.TLNAME", SelTestTool.ToolName)
+      EgtLuaSetGlobStringVar("CMD.TLALIAS", SelTestTool.ToolAlias)
       Dim dThick As Double = 0
       EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       EgtLuaSetGlobNumVar("CMD.SAWTH", dThick)
+      Dim sTCPos As String = String.Empty
+      EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sTCPos)
+      EgtLuaSetGlobStringVar("CMD.TCPOS", sTCPos)
+
 
       '----------- ASSEGNO POSIZIONE DI ARRIVO MACCHINA -----------
       ' Assegno valore ad ogni asse da muovere (in zero macchina)
@@ -796,6 +1163,7 @@ Public Class ProjectMgrUC
          m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
          EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
          EgtResetMark(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+         m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrToolFromSelectedSawCurv = String.Empty
       End If
       ' aggiorno il disegno
       EgtDraw()
@@ -845,6 +1213,7 @@ Public Class ProjectMgrUC
       ResetCutBtn.Visibility = Windows.Visibility.Hidden
       SimulateBtn.Visibility = Windows.Visibility.Hidden
       WorkBtn.Visibility = Windows.Visibility.Hidden
+      If TestBtn.Visibility = Windows.Visibility.Visible Then TestBtn.Visibility = Windows.Visibility.Hidden
       ' Nascondo bottoni CadCutPageUC
       m_MainWindow.m_CadCutPageUC.PhotoBtn.Visibility = Windows.Visibility.Hidden
       m_MainWindow.m_CadCutPageUC.RawPartBtn.Visibility = Windows.Visibility.Hidden
@@ -860,6 +1229,19 @@ Public Class ProjectMgrUC
       m_MainWindow.m_CadCutPageUC.m_NestPage.RemovePartBtn.Visibility = Windows.Visibility.Hidden
       m_MainWindow.m_CadCutPageUC.m_NestPage.SelectAllBtn.Visibility = Windows.Visibility.Hidden
       m_MainWindow.m_CadCutPageUC.m_NestPage.DeselectAllBtn.Visibility = Windows.Visibility.Hidden
+      ' nuovi bottoni pagina di Nesting
+      m_MainWindow.m_CadCutPageUC.m_NestPage.DragRettanleBtn.Visibility = Windows.Visibility.Hidden
+      If m_MainWindow.m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.Visibility = Windows.Visibility.Visible Then
+         m_MainWindow.m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.Visibility = Windows.Visibility.Hidden
+      End If
+      ' Nascondo bottoni rawpage
+      m_MainWindow.m_RawPartPage.OtherRefTabBtn.Visibility = Windows.Visibility.Hidden
+
+      m_MainWindow.m_CadCutPageUC.m_NestPage.LoadParams()
+      ' Rendo visibili i bottoni per la definizione degli Spotreg
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG0_Reg.Visibility = Visibility.Visible
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG1_Reg.Visibility = Visibility.Visible
+
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Se c'è la foto devo sistemare
@@ -891,8 +1273,15 @@ Public Class ProjectMgrUC
       End If
       ' Visualizzo step adatti alla scelta fatta
       m_MainWindow.m_CadCutPageUC.m_NestPage.UpdateStepsOnUI()
+
       ' Cancello eventuali messaggi di errore/avvertimento
       m_CurrProjPage.ClearMessage()
+
+      ' visualizzo i punti di SpotReg
+      EgtSetStatus(m_MainWindow.m_CadCutPageUC.m_NestPage.m_nRegGroupId, GDB_ST.ON_)
+      ' eventualmente risistemo tutti i punti Spotreg in funzione dell'altezza del grezzo
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UpdateSpotRegistration()
+      EgtDraw()
    End Sub
 
    Private Sub RegisterBtn_Unchecked(sender As Object, e As RoutedEventArgs) Handles RegisterBtn.Unchecked
@@ -920,6 +1309,7 @@ Public Class ProjectMgrUC
       m_MainWindow.m_CadCutPageUC.DrawBtn.Visibility = Windows.Visibility.Visible
       m_MainWindow.m_CadCutPageUC.ImportBtn.Visibility = Windows.Visibility.Visible
       m_MainWindow.m_CadCutPageUC.SplitBtn.Visibility = Windows.Visibility.Visible
+      If TestBtn.Visibility = Windows.Visibility.Hidden Then TestBtn.Visibility = Windows.Visibility.Visible
       ' Visualizzo bottoni nesting
       m_MainWindow.m_CadCutPageUC.m_NestPage.m_bRegister = False
       m_MainWindow.m_CadCutPageUC.m_NestPage.MaximizeMoveBtn.IsEnabled = True
@@ -929,6 +1319,22 @@ Public Class ProjectMgrUC
       m_MainWindow.m_CadCutPageUC.m_NestPage.RemovePartBtn.Visibility = Windows.Visibility.Visible
       m_MainWindow.m_CadCutPageUC.m_NestPage.SelectAllBtn.Visibility = Windows.Visibility.Visible
       m_MainWindow.m_CadCutPageUC.m_NestPage.DeselectAllBtn.Visibility = Windows.Visibility.Visible
+      ' nuovi bottoni pagina di Nesting
+      m_MainWindow.m_CadCutPageUC.m_NestPage.DragRettanleBtn.Visibility = Windows.Visibility.Visible
+      If m_MainWindow.m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.Visibility = Windows.Visibility.Hidden Then
+         m_MainWindow.m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.Visibility = Windows.Visibility.Visible
+      End If
+      ' disabilito i comandi per gestioen SpotReg
+      m_MainWindow.m_CadCutPageUC.m_NestPage.PointRegCheckedOff()
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG0_Reg.Visibility = Visibility.Hidden
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG1_Reg.Visibility = Visibility.Hidden
+
+      ' Nascondo bottoni rawpage
+      m_MainWindow.m_RawPartPage.OtherRefTabBtn.Visibility = Windows.Visibility.Visible
+
+      ' Nascondo i bottoni per la definizione degli Spotreg
+      m_MainWindow.m_CadCutPageUC.m_NestPage.UG0_Reg.Visibility = Visibility.Hidden
+
       ' Se c'è la foto devo sistemare
       If m_CurrProjPage.GetPhoto() <> GDB_ID.NULL Then
          ' Recupero il riferimento originale del primo grezzo
@@ -973,6 +1379,11 @@ Public Class ProjectMgrUC
       End If
       ' Visualizzo step adatti alla scelta fatta
       m_MainWindow.m_CadCutPageUC.m_NestPage.UpdateStepsOnUI()
+
+      ' nascondi i punti di SpotReg
+      EgtSetStatus(m_MainWindow.m_CadCutPageUC.m_NestPage.m_nRegGroupId, GDB_ST.OFF)
+      EgtDraw()
+
       ' Cancello eventuali messaggi di errore/avvertimento
       m_CurrProjPage.ClearMessage()
    End Sub
@@ -984,6 +1395,7 @@ Public Class Scrap
    Private m_iPictureID As Integer
    Private m_sName As String
    Private m_IdRaw As Integer
+   ' nState=1 -> da inserire in DB, nState=2 -> già inserito in DB
    Private m_nState As Integer
 
    Public Property PictureID() As Integer
@@ -1016,9 +1428,16 @@ Public Class Scrap
       End Get
    End Property
 
-   Public ReadOnly Property PictureString() As String
+   Public Sub ResetState(Optional nNewState As Integer = 1)
+      m_nState = nNewState
+      EgtSetInfo(m_IdRaw, K_ISNEWSCRAPS, nNewState)
+      EgtRemoveInfo(m_IdRaw, K_DATABASEID)
+   End Sub
+
+   Public ReadOnly Property PreviewState As System.Windows.Media.Imaging.BitmapImage
       Get
-         Return "/Resources/ImportPageListBoxImages/" + PictureID.ToString() + ".png"
+         Dim sPath As String = "/Resources/ImportPageListBoxImages/" & PictureID.ToString() & ".png"
+         Return New System.Windows.Media.Imaging.BitmapImage(New Uri(sPath, UriKind.Relative))
       End Get
    End Property
 

Project/SceneButtonsUC.xaml

@@ -39,6 +39,43 @@
       <Button Name="TopViewBtn" Grid.Column="6" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
          <Image Source="{DynamicResource LookFromTOPImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
       </Button>
+      <Popup Name="ViewPopUp"
+             IsOpen="False"
+             AllowsTransparency="False"
+             PopupAnimation="Scroll"
+             StaysOpen="False"  
+             Placement="Bottom"
+             PlacementTarget="{Binding ElementName=TopViewBtn}">
+         <WrapPanel Orientation="Vertical" 
+                    Width="78"
+                    Background="{DynamicResource OmagCut_Gray}">
+            <Button x:Name="BottomViewBtn" 
+                    ToolTip="Bottom View"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+               <Image Source="{DynamicResource LookFromBOTTOMImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button x:Name="FrontViewBtn" 
+                    ToolTip="Front View"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+               <Image Source="{DynamicResource LookFromFRONTImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button x:Name="BackViewBtn"
+                    ToolTip="Back View"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+               <Image Source="{DynamicResource LookFromBACKImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button x:Name="LeftViewBtn"
+                    ToolTip="Left View"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+               <Image Source="{DynamicResource LookFromLEFTImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button x:Name="RightViewBtn"
+                    ToolTip="Right View"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+               <Image Source="{DynamicResource LookFromRIGHTImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </WrapPanel>
+      </Popup>
       
    </Grid>
 

Project/SceneButtonsUC.xaml.vb

@@ -5,6 +5,10 @@ Public Class SceneButtonsUC
    'Riferimento alla MainWindow
    Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
 
+   Private Sub Init() Handles Me.Initialized
+      TopViewBtn.ToolTip = "Top View" & vbCrLf & "Select View (Shift)"
+   End Sub
+
    Private Sub MeasureBtn_Checked(sender As Object, e As RoutedEventArgs) Handles MeasureBtn.Checked
       GetCurrScene.SetStatusGetDistance()
       Dim ptRef1 As Point3d
@@ -49,6 +53,12 @@ Public Class SceneButtonsUC
    'End Sub
 
    Private Sub PanBtn_Click(sender As Object, e As RoutedEventArgs) Handles PanBtn.Click
+      If Keyboard.IsKeyDown(Key.LeftShift) Then
+         Dim bOrtoGraphic As Boolean = (GetPrivateProfileInt(S_SCENE, K_ORTOGRAPHIC, 1, m_MainWindow.GetIniFile()) <> 0)
+         EgtSetCameraType(Not bOrtoGraphic, True)
+         WritePrivateProfileString(S_SCENE, K_ORTOGRAPHIC, If(Not bOrtoGraphic, "1", "0"), m_MainWindow.GetIniFile())
+         Return
+      End If
       GetCurrScene.SetStatusPan()
    End Sub
 
@@ -69,7 +79,35 @@ Public Class SceneButtonsUC
    End Sub
 
    Private Sub TopViewBtn_Click(sender As Object, e As RoutedEventArgs) Handles TopViewBtn.Click
-      EgtSetView(VT.TOP)
+      If (Keyboard.Modifiers And ModifierKeys.Shift) > 0 Then
+         If ViewPopUp.IsOpen Then
+            ViewPopUp.IsOpen = False
+         Else
+            ViewPopUp.IsOpen = True
+         End If
+      Else
+         EgtSetView(VT.TOP)
+      End If
+   End Sub
+
+   Private Sub BottomViewBtn_Click(sender As Object, e As RoutedEventArgs) Handles BottomViewBtn.Click
+      EgtSetView(VT.BOTTOM)
+   End Sub
+
+   Private Sub FrontViewBtn_Click(sender As Object, e As RoutedEventArgs) Handles FrontViewBtn.Click
+      EgtSetView(VT.FRONT)
+   End Sub
+
+   Private Sub BackViewBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackViewBtn.Click
+      EgtSetView(VT.BACK)
+   End Sub
+
+   Private Sub LeftViewBtn_Click(sender As Object, e As RoutedEventArgs) Handles LeftViewBtn.Click
+      EgtSetView(VT.LEFT)
+   End Sub
+
+   Private Sub RightViewBtn_Click(sender As Object, e As RoutedEventArgs) Handles RightViewBtn.Click
+      EgtSetView(VT.RIGHT)
    End Sub
 
    Private Function GetCurrScene() As EgtUILib.Scene

Project/ScrapsWD.xaml

@@ -22,10 +22,26 @@
             </Grid.RowDefinitions>
 
             <Label Name="TitleTxBl" Grid.Column="1" Grid.Row="1" Foreground="White" FontSize="20" VerticalAlignment="Center"/>
-            <ListBox Name="ScrapsListBox" Grid.Column="1" Grid.Row="2" ItemTemplate="{DynamicResource DataTemplateItem}"
-               ItemsSource="{Binding ItemList, NotifyOnSourceUpdated=True}"/>
+            <ListBox Name="ScrapsListBox" Grid.Column="1" Grid.Row="2">
+                <ListBox.ItemTemplate>
+                    <DataTemplate>
+                        <Grid Margin="0,2">
+                            <Grid.ColumnDefinitions>
+                                <ColumnDefinition Width="0.5*" />
+                                <ColumnDefinition Width="1*" />
+                            </Grid.ColumnDefinitions>
+                            <Image Source="{Binding PreviewState}" VerticalAlignment="Center"
+                                   MaxWidth="50" MaxHeight="50"
+                                   Stretch="Uniform" Grid.Column="0" />
+                            <TextBlock Text="{Binding Name}" VerticalAlignment="Center"
+                                       Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"
+                                        Grid.Column="1"/>
+                        </Grid>
+                    </DataTemplate>
+                </ListBox.ItemTemplate>
+            </ListBox>
 
-            <Grid Grid.Column="1" Grid.Row="4">
+                <Grid Grid.Column="1" Grid.Row="4">
                 <Grid.ColumnDefinitions>
                     <ColumnDefinition Width="0.1*"/>
                     <ColumnDefinition Width="1*"/>

Project/StartLauncheWD.xaml.vb

@@ -96,16 +96,22 @@ Public Class StartLauncherWD
       Dim ItemFile As String = String.Empty
       'carico la liste dei file recenti
       Dim sFileName As String = String.Empty
+      Dim MruFileListRemove As New List(Of String)
       For Each ItemFile In m_MainWindow.m_CurrentProjectPageUC.m_MruFiles.FileNames
          sFileName = ItemFile.Replace("__", "_")
-         If Not String.IsNullOrEmpty(sFileName) Then
+         If Not String.IsNullOrEmpty(sFileName) AndAlso File.Exists(sFileName) Then
             m_RecentFileList.Add(New FileNameLsBxItem(sFileName, File.GetLastAccessTime(sFileName)))
             m_RecentFileList.Add(New FileNameLsBxItem(sFileName, File.GetLastAccessTime(sFileName)))
          Else
-            m_MainWindow.m_CurrentProjectPageUC.m_MruFiles.Remove(ItemFile)
+            MruFileListRemove.Add(ItemFile)
          End If
       Next
 
+      For Each ItemFileRemove As String In MruFileListRemove
+         m_MainWindow.m_CurrentProjectPageUC.m_MruFiles.Remove(ItemFileRemove)
+         EgtOutLog(" WARNING: File " & ItemFileRemove & " does not exist or is not accessible, it's been removed from MruFiles list")
+      Next
+
       ' posiziono la fistra in centro alla pagina
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2

RawPhoto/Camera.vb

@@ -205,6 +205,12 @@ Public Class Camera
       Dim nInd As Integer = 1
       If m_nCameraCount = 2 Then
          nInd = GetCurrentTable()
+         ' verifico se la macchina è configurata per fotocamera sulla tavola di lavoro
+         If (GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ENABLE, 0, m_MainWindow.GetMachIniFile()) <> 0) AndAlso
+            (GetPrivateProfileInt(S_CAMERAHQ, K_CAMERAHQ_ACTIVATE, 0, m_MainWindow.GetMachIniFile()) <> 0) Then
+            ' forzo l'utilizzo della seconda camera (sopra alla tavola di lavoro)
+            nInd = 2
+         End If
          If nInd <> 1 And nInd <> 2 Then Return 0
       End If
       ' Se gestore macchina non attivo, lo lancio in modo cieco
@@ -315,6 +321,16 @@ Public Class Camera
       GetPrivateProfileString(S_NCDATA, K_SPOTLIGHT2, "", sPLCVarSpotLight2, m_MainWindow.GetMachIniFile())
       Dim nPhotoDeley As Integer = GetPrivateProfileInt(S_NCNUM, K_PHOTODELEY, "100", m_MainWindow.GetMachIniFile())
 
+      ' eventualmente rimuovo inizio stringa: "PLC, ___"
+      Dim sItemString1() As String = Split(sPLCVarSpotLight1, ","c)
+      If sItemString1.Count > 1 Then
+         sPLCVarSpotLight1 = sItemString1(1).Trim
+      End If
+      Dim sItemString2() As String = Split(sPLCVarSpotLight2, ","c)
+      If sItemString2.Count > 1 Then
+         sPLCVarSpotLight2 = sItemString2(1).Trim
+      End If
+
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
          Case 1, 2
             If m_MainWindow.m_CNCommunication.m_nNCType = 2 Then
@@ -331,6 +347,13 @@ Public Class Camera
 
       ' ------------------------------------ accensione riflettori ------------------------------------
 
+      ' ------------------------------------ mando la testa in home ------------------------------------
+      If Not GoHomeForPhoto() Then
+         EgtOutLog("Error in positioning")
+      End If
+
+      ' ------------------------------------ mando la testa in home ------------------------------------
+
       ' Scatto una foto con eventuale riconoscimento del contorno (il programma deve essere già attivo)
       Dim bOk As Boolean = False
       Dim sArgs As String = "2 0"
@@ -348,6 +371,66 @@ Public Class Camera
       Return bOk
    End Function
 
+   Private Function GoHomeForPhoto() As Boolean
+      Dim bGoHome As Boolean = GetPrivateProfileInt(S_PHOTO, K_ENABELE_GOHOME_FOR_PHOTO, 0, m_MainWindow.GetMachIniFile()) <> 0
+      ' Se non configurato esco senza generare errore
+      If Not bGoHome Then Return True
+      ' Costruisco il bottone per potere eseguire il comando MDI
+      Dim GoHome As MachineButton = Nothing
+      Dim sDirectCmdFile As String = String.Empty
+      GetPrivateProfileString(S_PHOTO, K_CAMERA_DIRECT_CMD, "", sDirectCmdFile, m_MainWindow.GetMachIniFile())
+      If String.IsNullOrEmpty(sDirectCmdFile) Then
+         Return False
+      Else
+         EgtOutLog("Direct command for positionig head: " & sDirectCmdFile)
+      End If
+      GoHome = New TwoStateButton("", sDirectCmdFile, "", "", "")
+      ' eseguo lo script lua associato
+      GoHome.ExecuteMDICommand(GoHome.TLuaScriptName)
+      ' Leggo nome variabile posizione home raggiunta
+      Dim CameraStateNameVar As String = String.Empty
+      GetPrivateProfileString(S_PHOTO, K_CAMERA_STATE_VAR, "", CameraStateNameVar, m_MainWindow.GetMachIniFile())
+      Dim nSteps As Integer = 20
+      nSteps = GetPrivateProfileInt(S_PHOTO, K_PENDIG_TIME_FOR_PHOTO, nSteps, m_MainWindow.GetMachIniFile())
+      If String.IsNullOrEmpty(CameraStateNameVar) Then
+         'Return False
+      Else
+         EgtOutLog("Variable for read status of positioning head: " & CameraStateNameVar)
+      End If
+      ' 91144=Going home
+      m_MainWindow.m_CurrentProjectPageUC.SetInfoMessage(EgtMsg(91144))
+      UpdateUI()
+      ' Eseguo reset variabile posizione home raggiunta
+      m_MainWindow.m_CNCommunication.m_CN.DVariables_WriteVariables2(CameraStateNameVar, "0")
+      System.Threading.Thread.Sleep(300)
+      ' Definisco flag posizionamento completato
+      Dim bPositionOk As Boolean = False
+      For I As Integer = 0 To nSteps
+         ' Devo rileggere la variabile ad ogni ciclo
+         m_MainWindow.m_CNCommunication.m_CN.ReadEls_Add_Parameter(CameraStateNameVar, 3)
+         System.Threading.Thread.Sleep(100)
+         If m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
+            Dim CameraStateVal As Integer = CInt(m_MainWindow.m_CNCommunication.m_CN.d_DReadELS_value)
+            Select Case CameraStateVal
+               Case 0
+                  ' Non faccio alcunchè perchè si sta posizionando
+               Case 1
+                  ' Posizionamento completato
+                  bPositionOk = True
+                  Exit For
+               Case 2
+                  ' Errore
+                  bPositionOk = False
+                  Exit For
+            End Select
+         End If
+         System.Threading.Thread.Sleep(900)
+      Next
+      m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      UpdateUI()
+      Return bPositionOk
+   End Function
+
    Private Function WaitPhoto(nInd As Integer) As Boolean
       ' Ciclo di ricerca foto scattata
       Dim nMaxThick = 10 * m_nTimeout

RawPhoto/ChooseMachining.xaml

@@ -35,7 +35,42 @@
             </ComboBox.ItemTemplate>
          </ComboBox>
 
-          <!--LAVORAZIONE SECONDARIA-->
+         <!--TAGLIO TILTED-->
+         <Grid Grid.Column="1" Grid.Row="2">
+             <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="2*"/>
+                    <ColumnDefinition Width="9*"/>
+             </Grid.ColumnDefinitions>
+             <CheckBox Name ="ApplySawingTiltedChBx" Grid.Column="0"
+                       Style="{StaticResource OmagCut_CheckBox_Single}" 
+                       Margin="1.5,0,0,0"/>
+             <TextBlock Name="CurrSawingTiltedTxBl" Grid.Column="1" 
+                 Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+         </Grid>
+         
+         <ComboBox Name="CurrSawingTiltedCmBx" Grid.Column="1" Grid.Row="1">
+             <ComboBox.ItemTemplate>
+                 <DataTemplate>
+                     <TextBlock Text="{Binding}" FontSize="20">
+                         <TextBlock.Style>
+                             <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_CurrProjSummeryTextBlock}">
+                                 <Style.Triggers>
+                                        <DataTrigger Binding="{Binding ElementName=ApplySawingTiltedChBx, Path=IsChecked}" Value="False">
+                                         <Setter Property="TextDecorations" Value="Strikethrough"/>
+                                         <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                                     </DataTrigger>
+                                        <DataTrigger Binding="{Binding ElementName=ApplySawingTiltedChBx, Path=IsChecked}" Value="True">
+                                         <Setter Property="Foreground" Value="Black"/>
+                                     </DataTrigger>
+                                 </Style.Triggers>
+                             </Style>
+                         </TextBlock.Style>
+                     </TextBlock>
+                 </DataTemplate>
+             </ComboBox.ItemTemplate>
+         </ComboBox>
+
+            <!--LAVORAZIONE SECONDARIA-->
          <TextBlock Name="AuxiliaryMachiningTxBl" Grid.Column="1" Grid.Row="2"
             Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" Visibility="Hidden"/>
          <ComboBox Name="AuxiliaryMachiningCmBx" Grid.Column="1" Grid.Row="3" Visibility="Hidden">

RawPhoto/ChooseMachining.xaml.vb

@@ -8,6 +8,7 @@ Public Class ChooseMachining
    Private m_CurrentMachine As CurrentMachine = m_MainWindow.m_CurrentMachine
    ' Liste che contengono gli elementi appartenenti alle ComboBox
    Private m_SawingList As New List(Of String)
+   Private m_SawingTiltedList As New List(Of String)
    Private m_AuxMachTypeList As New List(Of StringIdCmBx)
    Private m_DrillingList As New List(Of String)
    Private m_MillingList As New List(Of String)
@@ -36,6 +37,7 @@ Public Class ChooseMachining
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
       CurrSawingCmBx.ItemsSource = m_SawingList
+      CurrSawingTiltedCmBx.ItemsSource = m_SawingTiltedList
       AuxiliaryMachiningCmBx.ItemsSource = m_AuxMachTypeList
       CurrDrillingCmBx.ItemsSource = m_DrillingList
       CurrMillingCmBx.ItemsSource = m_MillingList
@@ -44,6 +46,7 @@ Public Class ChooseMachining
       CurrWJettingQualityCmBx.ItemsSource = m_CurrentMachine.Qualities
 
       CurrSawingTxBl.Text = EgtMsg(MSG_CHOOSEMACHININGPAGEUC + 1)
+      CurrSawingTiltedTxBl.Text = EgtMsg(91023)                                              ' Lavorazione inclinata
       AuxiliaryMachiningTxBl.Text = EgtMsg(MSG_CHOOSEMACHININGPAGEUC + 2)
       CurrDrillingTxBl.Text = EgtMsg(MSG_CHOOSEMACHININGPAGEUC + 3)
       CurrMillingTxBl.Text = EgtMsg(MSG_CHOOSEMACHININGPAGEUC + 4)
@@ -69,7 +72,13 @@ Public Class ChooseMachining
       ' -- TAGLIO --
       CreateMachiningList(MCH_MY.SAWING, m_CurrentMachine.sCurrSaw, m_SawingList)
       ' aggiungo un campo vuoto
-      m_SawingList.Add( "")
+      m_SawingList.Add("")
+      ' -- TAGLIO TILTED --
+      CurrSawingTiltedCmBx.IsEnabled = m_MainWindow.m_CurrentMachine.bApplySawingTilted
+      ApplySawingTiltedChBx.IsChecked = m_MainWindow.m_CurrentMachine.bApplySawingTilted
+      CreateMachiningList(MCH_MY.SAWING, m_CurrentMachine.sCurrSawTilted, m_SawingTiltedList)
+      ' aggiungo un campo vuoto
+      m_SawingTiltedList.Add("")
 
       ' Verifico la configurazione della macchina per creare i combobox
       Select Case m_CurrentMachine.MountedToolConfig
@@ -78,7 +87,7 @@ Public Class ChooseMachining
             ChooseMachiningGrid.Children.Remove(AuxiliaryMachiningTxBl)
             ChooseMachiningGrid.Children.Remove(AuxiliaryMachiningCmBx)
 
-         Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL, CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER
+         Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL, CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
             ' Creo lista lavorazioni foretto e fresa
             If m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL Then
                CreateMachiningList(MCH_MY.DRILLING, m_CurrentMachine.sCurrDrill, m_DrillingList)
@@ -114,7 +123,10 @@ Public Class ChooseMachining
 
                ' ---- MACCHINA CON CAMBIO UTENSILE ----
             ElseIf m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER Or
-                   m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGER Then
+                   m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGER Or
+                   m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+               ' -- TAGLIO --
+               ' Il taglio è aggiunto sempre (all'inizio di questo metodo)
                ' -- FORATURA -- 
                CreateMachiningList(MCH_MY.DRILLING, m_DrillingList)
                ' Se la lista è vuota cancello la lavorazione corrente di questo tipo
@@ -175,20 +187,24 @@ Public Class ChooseMachining
 
       End Select
 
-      ' verifico che lista delle lavorazioni di lama non sia vuoto
-      If m_SawingList.Count > 0 Then
-         ' provo ad assegnare la lama corrente (se l'associazione fallisce corrispoende ad impostare un campo vuoto)
-         CurrSawingCmBx.SelectedItem = m_MainWindow.m_CurrentMachine.sCurrSawing
+      If m_CurrentMachine.bWaterJet And EgtGetHeadId("H1") = GDB_ID.NULL Then
+
       Else
-         m_MainWindow.m_CurrentMachine.sCurrSawing = String.Empty
-      End If
-      ' se non riesco a fare l'assegnazione della lama allora elimino il nome della lama salvata
-      If String.IsNullOrEmpty(CurrSawingCmBx.SelectedItem) Then
-         ' verifico che il nome della lama esista
-         If CurrSawingCmBx.SelectedItem <> m_MainWindow.m_CurrentMachine.sCurrSawing Then
-            m_MachIsModified = True
+         ' verifico che lista delle lavorazioni di lama non sia vuoto
+         If m_SawingList.Count > 0 Then
+            ' provo ad assegnare la lama corrente (se l'associazione fallisce corrispoende ad impostare un campo vuoto)
+            CurrSawingCmBx.SelectedItem = m_MainWindow.m_CurrentMachine.sCurrSawing
+         Else
+            m_MainWindow.m_CurrentMachine.sCurrSawing = String.Empty
+         End If
+         ' se non riesco a fare l'assegnazione della lama allora elimino il nome della lama salvata
+         If String.IsNullOrEmpty(CurrSawingCmBx.SelectedItem) Then
+            ' verifico che il nome della lama esista
+            If CurrSawingCmBx.SelectedItem <> m_MainWindow.m_CurrentMachine.sCurrSawing Then
+               m_MachIsModified = True
+            End If
+            m_MainWindow.m_CurrentMachine.sCurrSawing = String.Empty
          End If
-         m_MainWindow.m_CurrentMachine.sCurrSawing = String.Empty
       End If
 
       ' definizione della lista delle lavorazioni secondarie -- DA RIMUOVERE COMPLETAMENTE --
@@ -202,7 +218,8 @@ Public Class ChooseMachining
                      m_AuxMachTypeList.Add(New StringIdCmBx(4, EgtMsg(91069)))
                   End If
                   If m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER Or
-                     m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGER Then
+                     m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGER Or
+                     m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
                      m_AuxMachTypeList.Add(New StringIdCmBx(3, EgtMsg(MSG_CHOOSEMACHININGPAGEUC + 8)))
                   End If
                End If
@@ -486,6 +503,8 @@ Public Class ChooseMachining
       Dim nDeltaRow As Integer = 4
       Dim nNewRow As Integer = 2
       ' nascondo tutte le CmBx e TxBl
+      CurrSawingTiltedTxBl.Visibility = Windows.Visibility.Hidden
+      CurrSawingTiltedCmBx.Visibility = Windows.Visibility.Hidden
       CurrDrillingTxBl.Visibility = Windows.Visibility.Hidden
       CurrDrillingCmBx.Visibility = Windows.Visibility.Hidden
       CurrMillingTxBl.Visibility = Windows.Visibility.Hidden
@@ -495,6 +514,33 @@ Public Class ChooseMachining
       CurrWJettingTxBl.Visibility = Windows.Visibility.Hidden
       CurrWJettingCmBx.Visibility = Windows.Visibility.Hidden
 
+      ' -- LAMA TILTED -- se definito il cambio utensile con lama
+      'If m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+      If Not String.IsNullOrEmpty(m_CurrentMachine.sCurrSawTilted) Then
+         ' Definizione di due righe della tabella con la giusta altezza       
+         For Index As Integer = 1 To nNewRow
+            Dim Row As New RowDefinition
+            Row.Height = New GridLength(0.5, GridUnitType.Star)
+            ChooseMachiningGrid.RowDefinitions.Add(Row)
+         Next
+         m_RowNumber = m_RowNumber + nNewRow
+         ' titolo della ComboBox
+         CurrSawingTiltedTxBl.SetValue(Grid.RowProperty, m_RowNumber - nDeltaRow - nNewRow)
+         ' ComboBox (nella riga successiva al titolo)
+         CurrSawingTiltedCmBx.SetValue(Grid.RowProperty, m_RowNumber - nDeltaRow - nNewRow + 1)
+         'ButtonsGrid.SetValue(Grid.RowProperty, 5)
+         If m_CurrentMachine.sCurrSawingTilted <> String.Empty Then
+            CurrSawingTiltedCmBx.SelectedItem = m_CurrentMachine.sCurrSawingTilted
+         End If
+         ' verifico che la selezione sia andata a buon fine, altrimenti comunico l'avvenuta modifica
+         If String.IsNullOrEmpty(CurrSawingTiltedCmBx.SelectedItem) Then
+            ' verifico che sia stato inserito veramente una lavorazione prima di comunicare una modifica
+            If CurrSawingTiltedCmBx.SelectedItem <> m_CurrentMachine.sCurrSawingTilted Then m_MachIsModified = True
+         End If
+         CurrSawingTiltedTxBl.Visibility = Windows.Visibility.Visible
+         CurrSawingTiltedCmBx.Visibility = Windows.Visibility.Visible
+      End If
+
       ' -- FORATURA -- se foretto presente
       If m_CurrentMachine.bDrill And m_DrillingList.Count() > 0 Then
          ' Definizione di due righe della tabella con la giusta altezza       
@@ -617,6 +663,20 @@ Public Class ChooseMachining
       m_MainWindow.m_CurrentMachine.sCurrSawing = CurrSawingCmBx.SelectedItem.ToString()
    End Sub
 
+   Private Sub ApplySawingTiltedChBx_Checked() Handles ApplySawingTiltedChBx.Click
+      If ApplySawingTiltedChBx.IsChecked Then
+         CurrSawingTiltedCmBx.IsEnabled = True
+         m_MainWindow.m_CurrentMachine.bApplySawingTilted = True
+      Else
+         CurrSawingTiltedCmBx.IsEnabled = False
+         m_MainWindow.m_CurrentMachine.bApplySawingTilted = False
+      End If
+   End Sub
+
+   Private Sub CurrSawingTiltedCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles CurrSawingTiltedCmBx.SelectionChanged
+      m_MainWindow.m_CurrentMachine.sCurrSawingTilted = CurrSawingTiltedCmBx.SelectedItem.ToString()
+   End Sub
+
    Private Sub CurrDrillingCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles CurrDrillingCmBx.SelectionChanged
       m_MainWindow.m_CurrentMachine.sCurrDrilling = CurrDrillingCmBx.SelectedItem.ToString()
    End Sub

RawPhoto/OtherRefTabWD.xaml

@@ -0,0 +1,98 @@
+<Window x:Class="OtherRefTabWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   FontFamily="{DynamicResource OmagCut_Font}"
+   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+   Title="ModifStartEndWD" Height="350" Width="320" ShowInTaskbar="False">
+
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid x:Name="SaveNameGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.2*"/>
+                <ColumnDefinition Width="2*"/>
+                <ColumnDefinition Width="2*"/>
+                <ColumnDefinition Width="0.2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <!--<RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>-->
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.2*"/>
+            </Grid.RowDefinitions>
+
+            <TextBlock Name="SelRefTxbl" Grid.Column="1" Grid.Row="1"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+
+            <ComboBox Name="RefTabCmBx" Grid.Column="2" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}" 
+                MaxDropDownHeight="300" Margin="0,0,0,0">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>
+
+
+            <TextBlock Name="RefRawTxbl" Grid.Column="1" Grid.Row="3"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+
+            <ComboBox Name="RefTabOrientationCmBx" Grid.Column="2" Grid.Row="3" Style="{StaticResource OmagCut_ComboBox}" 
+               MaxDropDownHeight="300" Margin="0,0,0,0">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>
+
+            <TextBlock Name="RefTabXTxbl" Grid.Column="1" Grid.Row="5"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="RefTabXTxBx" Grid.Column="2" Grid.Row="5"
+            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+            <TextBlock Name="RefTabYTxbl" Grid.Column="1" Grid.Row="7"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="RefTabYTxBx" Grid.Column="2" Grid.Row="7"
+            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+            <Grid Name="ButtonsGrid" Grid.Column="1" Grid.ColumnSpan="2" Grid.Row="10" Grid.RowSpan="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1"
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3"
+                    IsCancel="True"
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</Window>

RawPhoto/OtherRefTabWD.xaml.vb

@@ -0,0 +1,229 @@
+Imports System.IO
+Imports System.Reflection
+Imports EgtUILib
+Imports EgtWPFLib
+
+Public Class OtherRefTabWD
+   Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Dim m_RawPartPage As RawPartPageUC
+
+   Private m_sPosX As String = "0"
+   Private m_sPosY As String = "0"
+
+   Private m_dPrevOffsetX As Double = 0
+   Private m_dPrevOffsetY As Double = 0
+
+   Private m_bModifX As Boolean = False
+   Private m_bModifY As Boolean = False
+
+   Private m_SelIndex As Integer = 0
+
+   Private m_SelRef As Integer = 0
+
+   Sub New(Owner As Window, PosX As String, PosY As String, OffsetX As Double, OffsetY As Double, OtherRefMode As Integer, SelRef As Integer)
+      Me.Owner = Owner
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+      m_sPosX = PosX
+      m_sPosY = PosY
+      m_dPrevOffsetX = OffsetX
+      m_dPrevOffsetY = OffsetY
+      m_SelIndex = OtherRefMode
+      m_SelRef = SelRef
+   End Sub
+
+   Private Sub OtherRrefTabWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' costruisco il riferimento alla pagina Raw
+      m_RawPartPage = m_MainWindow.m_RawPartPage
+      ' posiziono la finestra
+      Me.Top = Owner.Top + Owner.Height / 4 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 6 - Me.Width / 2
+      RefRawTxbl.Text = "Raw reference"
+      RefTabXTxbl.Text = "Position X"
+      RefTabYTxbl.Text = "Position Y"
+      SelRefTxbl.Text = "Sel reference"
+      RefTabOrientationCmBx.ItemsSource = m_RawPartPage.m_OtherRefTabOrientationList
+      RefTabOrientationCmBx.SelectedIndex = m_RawPartPage.m_OtherRefTabPos
+      RefTabCmBx.ItemsSource = m_RawPartPage.m_OtherRefTabList
+      RefTabCmBx.SelectedIndex = m_RawPartPage.m_CurrRefTab
+   End Sub
+
+   Private Sub OtherRrefTabWD_Load(sender As Object, e As EventArgs) Handles Me.Loaded
+      RefTabXTxBx.Text = m_sPosX
+      RefTabYTxBx.Text = m_sPosY
+   End Sub
+
+   Private Sub RefTabCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles RefTabCmBx.SelectionChanged
+      If m_bModifX Or m_bModifY Then
+         Dim SaveCurrToolWnd = New EgtMsgBox(m_MainWindow, "", EgtMsg(MSG_EGTMSGBOX + 2), EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL)
+         Select Case SaveCurrToolWnd.m_nPressedBtn
+            Case 0    ' Annulla
+               ' annullo l'operazione di cambio indice
+               RefTabCmBx.SelectedIndex = m_RawPartPage.m_CurrRefTab
+               Return
+            Case 1    ' Si
+               ' salvo i valori modificati
+               UpdateCurrOffset()
+               ' recupero l'oggetto precedentemente selezionato e lo aggiorno (per evitare di rileggere il file ini)
+               Dim temp_RefTab As ReferenceTable = m_RawPartPage.m_OtherRefTabList(m_RawPartPage.m_CurrRefTab)
+               temp_RefTab.dOffsetX = m_RawPartPage.m_OtherRefTabX
+               temp_RefTab.dOffsetY = m_RawPartPage.m_OtherRefTabY
+               temp_RefTab.nPos = m_RawPartPage.m_OtherRefTabPos
+            Case 2    ' No
+               ' Non salvo e vado oltre
+               m_bModifX = False
+               m_bModifY = False
+         End Select
+      End If
+      ' recupero l'oggetto selezionato
+      Dim local_RefTab As ReferenceTable = m_RawPartPage.m_OtherRefTabList(RefTabCmBx.SelectedIndex)
+      m_RawPartPage.m_CurrRefTab = RefTabCmBx.SelectedIndex
+      ' Imposto gli Offset del riferimento selezionato
+      RefTabXTxBx.Text = LenToString(local_RefTab.dOffsetX, 2)
+      m_RawPartPage.m_OtherRefTabX = local_RefTab.dOffsetX
+      RefTabYTxBx.Text = LenToString(local_RefTab.dOffsetY, 2)
+      m_RawPartPage.m_OtherRefTabY = local_RefTab.dOffsetY
+      ' Aggiorno la posizine del grezzo
+      m_RawPartPage.RefTabModeChange()
+      m_bModifX = False
+      m_bModifY = False
+   End Sub
+
+   Private Sub RefTabOrientationCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles RefTabOrientationCmBx.SelectionChanged
+      m_RawPartPage.m_OtherRefTabPos = RefTabOrientationCmBx.SelectedIndex
+      m_RawPartPage.RefTabModeChange()
+   End Sub
+
+   Private Sub RefTabXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RefTabXTxBx.EgtClosed
+      Dim ptMin, ptMax As Point3d
+      If EgtGetTableArea(1, ptMin, ptMax) Then
+         Dim dX As Double = 0
+         StringToLen(RefTabXTxBx.Text, dX)
+         If Not (dX > 0 And dX < ptMax.x - ptMin.x) Then
+            If dX > 0 Then
+               dX = ptMax.x - ptMin.x
+            Else
+               dX = 0
+            End If
+            RefTabXTxBx.Text = LenToString(dX, 2)
+            ' errore, posizione fuori dalla tavola
+         End If
+         m_RawPartPage.m_OtherRefTabX = dX
+         m_bModifX = True
+         m_RawPartPage.RefTabModeChange()
+      End If
+   End Sub
+
+   Private Sub RefTabYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RefTabYTxBx.EgtClosed
+      Dim ptMin, ptMax As Point3d
+      If EgtGetTableArea(1, ptMin, ptMax) Then
+         Dim dY As Double = 0
+         StringToLen(RefTabYTxBx.Text, dY)
+         If Not (dY > 0 And dY < ptMax.y - ptMin.y) Then
+            If dY > 0 Then
+               dY = ptMax.y - ptMin.y
+            Else
+               dY = 0
+            End If
+            RefTabYTxBx.Text = LenToString(dY, 2)
+            ' errore, posizione fuori dalla tavola
+         End If
+         m_RawPartPage.m_OtherRefTabY = dY
+         m_bModifY = True
+         m_RawPartPage.RefTabModeChange()
+      End If
+   End Sub
+
+   Private Sub OkBtn_Click() Handles OkBtn.Click
+      WritePrivateProfileString(S_RAWPART, K_CURRENTREFTAB, m_RawPartPage.m_CurrRefTab.ToString, m_MainWindow.GetIniFile())
+      ' Aggiorno il valore del riferimento correntemente modificato
+      UpdateCurrOffset()
+      m_RawPartPage.RefTabModeChange()
+      Me.Close()
+   End Sub
+
+   Private Sub UpdateCurrOffset()
+      Dim sKeyMsg As String = K_REFTAB & m_RawPartPage.m_CurrRefTab.ToString
+      Dim sValMsg As String = DoubleToString(m_RawPartPage.m_OtherRefTabX, 2) & "," & DoubleToString(m_RawPartPage.m_OtherRefTabY, 2) & "," & m_RawPartPage.m_OtherRefTabPos.ToString
+      WritePrivateProfileString(S_RAWPART, sKeyMsg, sValMsg, m_MainWindow.GetIniFile())
+   End Sub
+
+   Private Sub ExitBtn_Click() Handles ExitBtn.Click
+      ' Recupero la prima selezione eseguita
+      m_RawPartPage.m_CurrRefTab = m_SelRef
+      Dim temp_RefTab As ReferenceTable = m_RawPartPage.m_OtherRefTabList(m_RawPartPage.m_CurrRefTab)
+      ' aggiorno i valori
+      m_RawPartPage.m_OtherRefTabX = temp_RefTab.dOffsetX
+      m_RawPartPage.m_OtherRefTabY = temp_RefTab.dOffsetY
+      m_RawPartPage.m_OtherRefTabPos = temp_RefTab.nPos
+      m_RawPartPage.RefTabModeChange()
+   End Sub
+
+End Class
+
+Public Class ReferenceTable
+
+   Private m_dOffsetX As Double
+   Private m_dOffsetY As Double
+   Private m_nPos As RawPartPageUC.OTHERREFMODE = RawPartPageUC.OTHERREFMODE.BL
+   Private m_nIndexRef As Integer = 0
+
+   Public Property dOffsetX As Double
+      Get
+         Return m_dOffsetX
+      End Get
+      Set(value As Double)
+         m_dOffsetX = value
+      End Set
+   End Property
+
+   Public Property dOffsetY As Double
+      Get
+         Return m_dOffsetY
+      End Get
+      Set(value As Double)
+         m_dOffsetY = value
+      End Set
+   End Property
+
+   Public Property nPos As Integer
+      Get
+         Return m_nPos
+      End Get
+      Set(value As Integer)
+         m_nPos = value
+      End Set
+   End Property
+
+   Public Property nIndexRef As Integer
+      Get
+         Return m_nIndexRef
+      End Get
+      Set(value As Integer)
+         m_nIndexRef = value
+      End Set
+   End Property
+
+   Public ReadOnly Property Name As String
+      Get
+         Return "REF_" & m_nIndexRef.ToString()
+      End Get
+   End Property
+
+   Public ReadOnly bOk As Boolean = True
+
+   Sub New(sStringFromIni As String, IndexRef As Integer)
+      Dim sItems() As String = sStringFromIni.Split(","c)
+      If sItems.Count = 3 Then
+         bOk = bOk And StringToLen(sItems(0), m_dOffsetX)
+         bOk = bOk And StringToLen(sItems(1), m_dOffsetY)
+         bOk = bOk And StringToInt(sItems(2), m_nPos)
+         m_nIndexRef = IndexRef
+      Else
+         bOk = False
+      End If
+   End Sub
+
+End Class

RawPhoto/RawPartPageUC.xaml

@@ -6,76 +6,76 @@
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Loaded="RawPartPage_Loaded" Initialized="RawPartPage_Initialized" Unloaded="RawPartPage_Unloaded">
-      
-   <!-- Definizione della RowPartPage -->
-   <Grid Name="RowPartPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
-      
-      <!-- Definizione della Grid superiore -->
-      <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="5*"/>
-            <ColumnDefinition Width="7*"/>
-         </Grid.ColumnDefinitions>
-         
-      </Grid>
-      
-      <!-- Definizione della Grid Laterale -->
-      <Grid Name="LeftButtonGrid" Grid.RowSpan="3">
-      
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1.5*"/>
-            <ColumnDefinition Width="1.5*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="4*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="1.*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
 
-         <RadioButton Name="OutlineBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
-               GroupName="DefinitionMethod_GrezzoUC"/>
-         <RadioButton Name="DamagedBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
-               Grid.Column="1" GroupName="DefinitionMethod_GrezzoUC"/>
+    <!-- Definizione della RowPartPage -->
+    <Grid Name="RowPartPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <!-- Definizione della Grid per definizione grezzo -->
-         <Grid Name="RawMeasureGrd" Grid.Row="1" Grid.ColumnSpan="2">
+        <!-- Definizione della Grid superiore -->
+        <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="7*"/>
+            </Grid.ColumnDefinitions>
+
+        </Grid>
+
+        <!-- Definizione della Grid Laterale -->
+        <Grid Name="LeftButtonGrid" Grid.RowSpan="3">
+
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1.5*"/>
+                <ColumnDefinition Width="1.5*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="4*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="1.*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
-            <ComboBox Name="RawModeCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
-               MaxDropDownHeight="300" Margin="6,0,6,0">
-               <ComboBox.ItemTemplate>
-                  <DataTemplate>
-                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                  </DataTemplate>
-               </ComboBox.ItemTemplate>
-            </ComboBox>
+            <RadioButton Name="OutlineBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
+               GroupName="DefinitionMethod_GrezzoUC"/>
+            <RadioButton Name="DamagedBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
+               Grid.Column="1" GroupName="DefinitionMethod_GrezzoUC"/>
 
-            <ComboBox Name="RawModeDamagedCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
+            <!-- Definizione della Grid per definizione grezzo -->
+            <Grid Name="RawMeasureGrd" Grid.Row="1" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                </Grid.RowDefinitions>
+
+                <ComboBox Name="RawModeCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
+               MaxDropDownHeight="300" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <ComboBox Name="RawModeDamagedCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
                MaxDropDownHeight="300" Margin="6,0,6,0">
                     <ComboBox.ItemTemplate>
                         <DataTemplate>
@@ -85,114 +85,131 @@
                 </ComboBox>
 
                 <TextBlock Name="LengthTxBl" Grid.Row="1" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="LengthTxBx" Grid.Column="1" Grid.Row="1" Margin="13,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="LengthTxBx" Grid.Column="1" Grid.Row="1" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="WidthTxBl" Grid.Row="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="2" Margin="13,0,6,0"
+                <TextBlock Name="WidthTxBl" Grid.Row="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="2" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="HeightTxBl" Grid.Row="3" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="3" Margin="13,0,6,0"
+                <TextBlock Name="HeightTxBl" Grid.Row="3" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="3" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="OffsetXTxBl" Grid.Row="4" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="OffsetXTxBx" Grid.Column="1" Grid.Row="4" Margin="13,0,6,0"
+                <TextBlock Name="OffsetXTxBl" Grid.Row="4" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsetXTxBx" Grid.Column="1" Grid.Row="4" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="OffsetYTxBl" Grid.Row="5" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="OffsetYTxBx" Grid.Column="1" Grid.Row="5" Margin="13,0,6,0"
+                <TextBlock Name="OffsetYTxBl" Grid.Row="5" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsetYTxBx" Grid.Column="1" Grid.Row="5" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="KerfTxBl" Grid.Row="6" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="KerfTxBx" Grid.Column="1" Grid.Row="6" Margin="13,0,6,0"
+                <TextBlock Name="KerfTxBl" Grid.Row="6" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="KerfTxBx" Grid.Column="1" Grid.Row="6" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         </Grid>
-                  
-         <!-- Definizione della Grid per il materiale -->
-         <GroupBox Name="MaterialGpBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+            </Grid>
 
-            <ComboBox Name="MaterialsCmbx" Style="{StaticResource OmagCut_ComboBox}"
+            <!-- Definizione della Grid per il materiale -->
+            <GroupBox Name="MaterialGpBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+
+                <ComboBox Name="MaterialsCmbx" Style="{StaticResource OmagCut_ComboBox}"
                MaxDropDownHeight="600">
-               <ComboBox.ItemTemplate>
-                  <DataTemplate>
-                     <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                  </DataTemplate>
-               </ComboBox.ItemTemplate>
-            </ComboBox>
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
 
-         </GroupBox>
+            </GroupBox>
 
-         <!-- Definizione della Grid per Punti -->
-         <GroupBox Name="PointsGpBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}" >
+            <!-- Definizione della Grid per Punti -->
+            <GroupBox Name="PointsGpBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}" >
 
-            <Grid >
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1.5*"/>
-                  <ColumnDefinition Width="1.5*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="1*"/>
-               </Grid.RowDefinitions>
+                <Grid >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1.5*"/>
+                        <ColumnDefinition Width="1.5*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                    </Grid.RowDefinitions>
 
-               <ToggleButton Name="AddBtn"
+                    <ToggleButton Name="AddBtn"
                   Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <ToggleButton Name="RemoveBtn" Grid.Column="1"
+                    <ToggleButton Name="RemoveBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <Button Name="CloseBtn" Grid.Row="1" Grid.ColumnSpan="2" 
+                    <Button Name="CloseBtn" Grid.Row="1" 
                   Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            </Grid>
-            
-         </GroupBox>
+                    <Button Name="RectangleBtn" Grid.Row="1" Grid.Column="1"
+                  Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                </Grid>
 
-         <!-- Definizione della Grid per Zona rovinata -->
-         <GroupBox Name="DamagedAreaGpBx" Grid.Row="4" Grid.ColumnSpan="2" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+            </GroupBox>
 
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
+            <!-- Definizione della Grid per Zona rovinata -->
+            <GroupBox Name="DamagedAreaGpBx" Grid.Row="4" Grid.ColumnSpan="2" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
 
-               <ToggleButton Name="NewBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <ToggleButton Name="DeleteBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            </Grid>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
 
-         </GroupBox>
+                    <ToggleButton Name="NewBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                    <ToggleButton Name="DeleteBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                </Grid>
 
-         <Button Name="ConfirmPhotoBtn" Grid.Row="4" Grid.ColumnSpan="2" Visibility="Hidden" 
+            </GroupBox>
+
+            <TextBlock Name="OtherRefTabTxBl" Grid.Row="5" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <CheckBox Name="OtherRefTabChBx" Grid.Row="5" Grid.Column="1" Style="{StaticResource OmagCut_CheckBox}"
+                    HorizontalAlignment="Right" Margin="0,0,6,0"/>
+
+            <Button Name="ConfirmPhotoBtn" Grid.Row="4" Grid.ColumnSpan="2" Visibility="Hidden" 
             Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-      </Grid>
-      
-      <!-- Definizione della Grid Inferiore per i Button V e X -->
-      <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="6*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
+        </Grid>
 
-         <Button Name="RawProbingBtn" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource RawProbeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+        <!-- Definizione della Grid Inferiore per i Button V e X -->
+        <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="3*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
 
-         <Button Name="BarCodeBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource BarCodeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+            <Button Name="RawProbingBtn" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource RawProbeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
 
-         <Button Name="SlabIdBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource SlabIdImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+            <Button Name="BarCodeBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource BarCodeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
 
-         <Button Name="OkBtn" Grid.Column="5" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-            <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
+            <Button Name="SlabIdBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource SlabIdImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="OtherRefTabBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource RefTabImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="ManualModeBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="OkBtn" Grid.Column="8" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
             VerticalAlignment="Center" />
-         </Button>
-         
-      </Grid>
-      
-   </Grid>
-   
+            </Button>
+
+        </Grid>
+
+    </Grid>
+
 </UserControl>