Gestione scrittura valore FeedHold letto da configurazione

- in VerifyOutOfStrokes prima di controllare il valore dell'asse C si cerca di riportarlo nel range ammesso (modulo 360 gradi).

CadCuts/MoveRawPartPage.xaml.vb

@@ -329,8 +329,6 @@ Public Class MoveRawPartPage
                   VacuumCups.SetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
                   VacuumCups.SetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
                   VacuumCups.SetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
-                  ' se su scarico frontale allora devo modificare la scelta delle ventose
-                  VacuumCups.bUnloadingOnAuxTab = m_SplitPage.m_bOnAuxTab
                   If PutVacuumCupsOnRaw(nId, rmData) Then
                      ' Visualizzo le ventose
                      EgtSetStatus(GetVacuumId(), GDB_ST.ON_)

CadCuts/NestPageUC.xaml.vb

@@ -1353,8 +1353,8 @@ Public Class NestPageUC
          VeinMatching.OnDeselectPart(m_nIdToDesel)
       End If
 
-
       ' Reset
+      GetFamilyGroupInPark()
       m_bDrag = False
       m_nIdToSel = GDB_ID.NULL
       m_nIdToDesel = GDB_ID.NULL

CadCuts/VacuumCups.vb

@@ -546,16 +546,27 @@ Module VacuumCups
       Return True
    End Function
 
-   ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   ' assegnate le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
    Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
-      Dim dX, dY, dZ As Double
-      Dim nStat As Integer
+      ' Posizione Home dell'asse rotante
       Dim dCHome As Double
       EgtGetAxisHomePos("C", dCHome)
-      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      ' Corse dell'asse
+      Dim dCMin As Double
+      EgtGetAxisMin("C", dCMin)
+      Dim dCMax As Double
+      EgtGetAxisMax("C", dCMax)
+      ' Porto l'angolo nel range
+      Dim dRotAngMachDeg As Double = dRotAngDeg + dCHome
+      AdjustAngleInRange(dRotAngMachDeg, dCMin, dCMax)
+      ' Imposto la ventosa come fosse un utensile
       EgtSetCalcTool("", "H4", 1)
-      EgtGetCalcPositions(ptRef, dRotAngDeg + dCHome, 0, nStat, dX, dY, dZ)
-      EgtVerifyOutstroke(dX, dY, dZ, dRotAngDeg + dCHome, 0, nStat)
+      ' Calcolo gli assi macchina
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      EgtGetCalcPositions(ptRef, dRotAngMachDeg, 0, nStat, dX, dY, dZ)
+      ' Verifico le corse
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngMachDeg, 0, nStat)
       Return nStat
    End Function
 

Constants/ConstMachIni.vb

@@ -46,6 +46,13 @@
    Public Const K_THREADSLEEP As String = "ThreadSleep"
    Public Const K_PHOTODELEY As String = "PhotoDeley"
 
+   Public Const S_NCFANUC As String = "NcFanuc"
+   Public Const K_SETNCMODE As String = "SetNcMode"
+   Public Const K_BASEADDRINT As String = "BaseAddrInt"
+   Public Const K_BASEADDRBIT As String = "BaseAddrBit"
+   Public Const K_NUMVARINT As String = "NumVarInt"
+   Public Const K_NUMVARBIT As String = "NumVarBit"
+
    Public Const S_EXECLUA As String = "ExecLua"
    Public Const K_FILESCRIPT_LUA As String = "FileScript"
 
@@ -78,6 +85,7 @@
    Public Const K_TABLEDOWN As String = "TableDown"
    Public Const K_MANUAL As String = "Manual"
    Public Const K_DOORCLOSED As String = "DoorClosed"
+   Public Const K_DOOROPENDED As String = "DoorOpened"
    Public Const K_LIMITZ As String = "LimitZ"
    Public Const K_POWEROVR As String = "PowerOvr"
    Public Const K_PARKING As String = "Parking"
@@ -112,6 +120,7 @@
    Public Const K_FEEDHOLD As String = "FeedHold"
    Public Const K_SPOTLIGHT1 As String = "SpotLight1"
    Public Const K_SPOTLIGHT2 As String = "SpotLight2"
+   Public Const K_NAXES As String = "nAxes"
    ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
    Public Const K_XYJOG As String = "XYJog"
@@ -270,6 +279,7 @@
    Public Const S_MACH_PROBING As String = "Probing"
    Public Const K_PROBINGSTATEVAR As String = "ProbingStateVar"
    Public Const K_SAWDIAMETER As String = "SawDiameter"
+   Public Const K_TOOLLENGTH As String = "ToolLength"
    Public Const K_RAWTHICKNESS As String = "RawThickness"
    Public Const K_ENABLERAWPROBE As String = "EnableRawProbe"
 

DirectCuts/ControlsDirectCutUC.xaml.vb

@@ -140,8 +140,11 @@ Public Class ControlsDirectCutUC
          Return
       End If
 
-      ' Caso standard
-      m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      If m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.MachineButtonUC Or
+         m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.VacuumButtonUC Then
+         ' Caso standard
+         m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      End If
 
       ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
       Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -76,6 +76,11 @@ Public Class ControlsMachineButtonUC
       End If
    End Sub
 
+#Region "STATE CHANGED"
+   ' ------------------------------------------------------------------------------
+   ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
+   '-------------------------------------------------------------------------------
+
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim SpindleButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
@@ -255,38 +260,34 @@ Public Class ControlsMachineButtonUC
       Dim DoorOpenedButton As ThreeStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_DOORCLOSED Then
-            'If TypeOf MachineButton Is NoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, NoStateButton)
-            'ElseIf TypeOf MachineButton Is TwoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, TwoStateButton)
-            'ElseIf TypeOf MachineButton Is ThreeStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, ThreeStateButton)
-            'ElseIf TypeOf MachineButton Is DoubleCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, DoubleCommandButton)
-            'ElseIf TypeOf MachineButton Is PressedCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, PressedCommandButton)
-            'End If
             DoorClosedButton = MachineButton
          End If
-         If MachineButton.StateFlag = "DoorOpened" Then
+         If MachineButton.StateFlag = K_DOOROPENDED Then
             DoorOpenedButton = MachineButton
          End If
       Next
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorClosedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_Red")
             Case 1, 2
+               ' porta in movimento/aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
          End Select
       End If
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorOpenedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
             Case 1
+               ' porta in movimento 
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Yellow")
             Case 2
+               ' porta chiusa
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Green")
          End Select
       End If
@@ -372,6 +373,7 @@ Public Class ControlsMachineButtonUC
       'End If
    End Sub
 
+#End Region    ' State Range
 
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
@@ -569,13 +571,64 @@ Public MustInherit Class MachineButton
                   EgtOutLog("dopo scrittura seconda variabile")
                End If
                Return
+            Case 4
+               ' ------------------------------------ FANUC ------------------------------------
+               ' eventuale scrittura di linea di comando MDI
+               If Not String.IsNullOrEmpty(CmdString) Then
+                  ' attivo mpdalità MDI
+                  m_CN.DGeneralFunctions_WriteCncMode(2)
+                  System.Threading.Thread.Sleep(100)
+                  ' salvo la stringa di comando ricevuta dal file lua
+                  m_CN.sz_ManualDataInput = CmdString
+                  ' esguo la funzione che ha il compito di scrivere il comando MDI
+                  m_CN.MDI_command()
+               End If
+               ' attivo modalità AUTO
+               m_CN.DGeneralFunctions_WriteCncMode(7)
+               System.Threading.Thread.Sleep(100)
+               If String.IsNullOrEmpty(EValue) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue As Boolean
+                     If EValue.Trim = "1" Then bEValue = True
+                     m_CN.NC_write_var_bit(ENumber, CBool(EValue))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber, CShort(EValue))
+                  End If
+                  EgtOutLog("Fanuc_DNumber= " & ENumber & " DValue= " & EValue)
+               End If
+               ' eventale caricamento seconda variabile
+               If String.IsNullOrEmpty(EValue2) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber2)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber2)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber2.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue2 As Boolean
+                     If EValue2.Trim = "1" Then bEValue2 = True
+                     m_CN.NC_write_var_bit(ENumber2, CBool(EValue2))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber2, CShort(EValue2))
+                  End If
+                  EgtOutLog("Fanuc_DNumber2= " & ENumber2 & " DValue2= " & EValue2)
+               End If
+               Return
          End Select
       End If
       '--------------------------------------------------------- MDI ---------------------------------------------------------
       Dim nResult As Short
       ' assegno la modalità di funzionamento
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
-         Case 1, 2
+         Case 1, 2, 4
             nResult = m_CN.DGeneralFunctions_WriteCncMode(2)     ' Modalità MDI per controlli num
          Case 3
             'Per il siemens non devo fare nulla
@@ -599,7 +652,7 @@ Public MustInherit Class MachineButton
          m_CN.DGeneralFunctions_CycleStart()
       End If
       System.Threading.Thread.Sleep(300)
-      ' riprostino la modalità manuale
+      ' ripristino la modalità manuale..?? siucuri ??
       nResult = m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
    End Sub
 
@@ -620,6 +673,7 @@ Public MustInherit Class MachineButton
          EgtTdbGetCurrToolParam(MCH_TP.FEED, dFeed)
       End If
       EgtLuaSetGlobNumVar("CMD.F", dFeed)
+
       Dim dSpeed As Double = 0
       If Not String.IsNullOrWhiteSpace(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text) Then
          StringToDouble(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text, dSpeed)
@@ -628,6 +682,7 @@ Public MustInherit Class MachineButton
          EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)
@@ -789,6 +844,7 @@ Public Class NoStateButton
             ExecuteMDICommand(TLuaScriptName)
          End If
       Else
+         ' FANUC, SIEMENS
          ExecuteMDICommand(TLuaScriptName)
       End If
    End Sub

DirectCuts/DirectCutPageUC.xaml

@@ -219,7 +219,10 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
             <!--<ColumnDefinition Width="1*"/>-->
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
@@ -263,9 +266,11 @@
               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
             <Image Source="{DynamicResource ParkingImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
+          
+          
 
          <!--Comando Manula/MDI-->
-         <Button Name="ManualModeBtn" Grid.Column="8"
+         <Button Name="ManualModeBtn" Grid.Column="11"
                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
             <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </Button>

DirectCuts/DirectCutPageUC.xaml.vb

@@ -53,7 +53,7 @@ Public Class DirectCutPageUC
 
       'Posizionemento nella griglia delle Page UserControl
       m_MachineButtons.SetValue(Grid.RowProperty, 2)
-      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 7)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, m_MachineButtons.nCountButton)
       m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
 
       m_ControlsDirectCutUC.SetValue(Grid.RowProperty, 1)
@@ -64,12 +64,18 @@ Public Class DirectCutPageUC
       ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [ControlMachButtons])
       Dim bCollapsedNewBottonsConsole As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons("JogButtons", "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
+      ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [VacuumMachButtons])
+      Dim bCollapsedVacuumButton As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_VACUUMMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       If Not m_NewMachineButtonsType Then
          'Assegno MachineButtons alla pagina
          LowerButtonGrid.Children.Add(m_MachineButtons)
          ControlsMachineBtn.Visibility = Windows.Visibility.Collapsed
          VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
       End If
+      ' se non sono configurate le ventose allora nascondo il comando
+      If m_NewMachineButtonsType AndAlso bCollapsedVacuumButton Then
+         VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
+      End If
 
       ' nuovi bottoni 20/05/2021 - modifica specifiche 04/08/2021
       ' leggo il numero di assi attivi nella macchina
@@ -209,6 +215,7 @@ Public Class DirectCutPageUC
          m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
          m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
          MachineButtonGrid.Children.Add(m_ControlsMachineButton)
+         m_ActiveControl = Controls.MachineButtonUC
          If VacuumMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
             VacuumMachineBtn.IsChecked = False
@@ -221,6 +228,7 @@ Public Class DirectCutPageUC
    Private Sub VacuumMachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles VacuumMachineBtn.Click
       If VacuumMachineBtn.IsChecked Then
          MachineButtonGrid.Children.Add(m_VacuumMachineButton)
+         m_ActiveControl = Controls.VacuumButtonUC
          If ControlsMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
             ControlsMachineBtn.IsChecked = False
@@ -444,8 +452,12 @@ Public Class DirectCutPageUC
             m_ControlsDirectCutUC1.DirectCutPage_Unloaded(Nothing, Nothing)
          Case Controls.MachineButtonUC
             MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC1)
             ControlsMachineBtn.IsChecked = False
          Case Controls.VacuumButtonUC
+            MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
             MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
             VacuumMachineBtn.IsChecked = False
       End Select

DirectCuts/MachineButtonsUC.xaml.vb

@@ -7,6 +7,8 @@ Public Class MachineButtonsUC
    Private m_DirectCutPage As DirectCutPageUC
    Friend m_CN As CN_generico
 
+   Public nCountButton As Integer = 11
+
    Private m_bOnlyLaser As Boolean = False
    Private m_bFirst As Boolean = True
 
@@ -76,6 +78,9 @@ Public Class MachineButtonsUC
          GetToggleButton(nIndex + 1).Visibility = Windows.Visibility.Hidden
       Next
 
+      ' notifico nella variabile pubblica il numero di pulsanti inseriti nella barra
+      nCountButton = m_nCount
+
       ' Se variabile di stato "Nothing"/"DoorOpened"/"DoorClosed" imposto immagine fissa
       For nIndex As Integer = 0 To m_nCount - 1
          If StateFlagArray(nIndex) = BTN_STATE_NOTHING OrElse
@@ -267,9 +272,62 @@ Public Class MachineButtonsUC
                   End If
                   Return
                End If
+               ' CONTROLLO FANUC
+            Case 4
+               ' ------------------------------------ FANUC ------------------------------------
+               ' eventuale scrittura di linea di comando MDI
+               If Not String.IsNullOrEmpty(CmdString) Then
+                  ' attivo mpdalità MDI
+                  m_CN.DGeneralFunctions_WriteCncMode(2)
+                  System.Threading.Thread.Sleep(100)
+                  ' salvo la stringa di comando ricevuta dal file lua
+                  m_CN.sz_ManualDataInput = CmdString
+                  ' esguo la funzione che ha il compito di scrivere il comando MDI
+                  m_CN.MDI_command()
+               End If
+               ' attivo modalità AUTO
+               m_CN.DGeneralFunctions_WriteCncMode(7)
+               System.Threading.Thread.Sleep(100)
+               If String.IsNullOrEmpty(EValue) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue As Boolean
+                     If EValue.Trim = "1" Then bEValue = True
+                     m_CN.NC_write_var_bit(ENumber, CBool(EValue))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber, CShort(EValue))
+                  End If
+                  EgtOutLog("Fanuc_DNumber= " & ENumber & " DValue= " & EValue)
+               End If
+               ' eventale caricamento seconda variabile
+               If String.IsNullOrEmpty(EValue2) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber2)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber2)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber2.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue2 As Boolean
+                     If EValue2.Trim = "1" Then bEValue2 = True
+                     m_CN.NC_write_var_bit(ENumber2, CBool(EValue2))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber2, CShort(EValue2))
+                  End If
+                  EgtOutLog("Fanuc_DNumber2= " & ENumber2 & " DValue2= " & EValue2)
+               End If
+               Return
          End Select
       End If
 
+
       Dim nResult As Short
       ' Imposto modalità MDI per controlli num
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
@@ -286,6 +344,8 @@ Public Class MachineButtonsUC
             m_CN.DGeneralFunctions_CycleStart()
          Case 3
             'Per il siemens non devo fare nulla
+         Case 4
+            ' Nicola: 27/03/2023 attivazione della funzione M# indicata?
       End Select
 
       If b2Start Then

DirectCuts/ManualAxesMoveUC.xaml.vb

@@ -209,7 +209,7 @@ Public Class ManualAxesMoveUC
       System.Threading.Thread.Sleep(150)
       m_CN.DGeneralFunctions_CycleStart()
       System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
-      m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
+      ' m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
       m_MoveClicked = False
    End Sub
 

DirectCuts/SingleCutUC.xaml.vb

@@ -583,7 +583,7 @@ Public Class SingleCutUC
       Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       EgtTdbSetCurrTool(sSaw)
       Dim dThick As Double = 0
-      ' se è impostata una lavorazione di lama
+      ' Se è impostata una lavorazione di lama
       If Not String.IsNullOrEmpty(sSawing) Then
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       End If
@@ -599,9 +599,12 @@ Public Class SingleCutUC
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
-      If Math.Abs(m_dOffset) > 10 * EPS_SMALL Then
-         Dim dTotOffset = m_dOffset
-         If m_bSawTh Then dTotOffset += If( m_dOffset > 0, dThick, -dThick)
+      ' Applico la correzione di spessore lama -> anche se Offset=0! ver_2.5b1
+      Dim dTotOffset = m_dOffset
+      If m_bSawTh Then
+         dTotOffset += If(m_dOffset > 0, dThick, -dThick)
+         EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
+      Else
          EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
       End If
       ' Imposto affondamento e angolo di fianco sul taglio

Machine/AlarmsPageUC.xaml.vb

@@ -1163,6 +1163,10 @@ Public Class AlarmsPageUC
          Case 3
             Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(0)
             EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+         Case 4
+            ' FANUC - Manual:7, Edit:1
+            Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(7)
+            EgtOutLog("Impostata modalità manuale: esito " & nResult.ToString)
       End Select
       ' Recupero file LUA
       EgtLuaExecFile(m_CurrentMachine.sMachDir() & "\DirectCmd\SawProbing.lua")
@@ -1228,6 +1232,11 @@ Public Class AlarmsPageUC
          Return
       End If
       m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      ' Se fanuc passo in modalità AUTO e attivo
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(0)
+         EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+      End If
       ' Aspetto e lo avvio
       System.Threading.Thread.Sleep(300)
       m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
@@ -1277,6 +1286,10 @@ Public Class AlarmsPageUC
          Dim bRead As Boolean = False
          Dim SawDiameterNameVar As String = String.Empty
          GetPrivateProfileString(S_MACH_PROBING, K_SAWDIAMETER, "", SawDiameterNameVar, m_MainWindow.GetMachIniFile())
+         ' Se utensile non lama, allora la variabile in cui leggo il dato potrebbe essere differente
+         If Not ToolForProbing.m_IsSaw Then
+            GetPrivateProfileString(S_MACH_PROBING, K_TOOLLENGTH, SawDiameterNameVar, SawDiameterNameVar, m_MainWindow.GetMachIniFile())
+         End If
          m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
          For I As Integer = 0 To 20
             ' Devo rileggere la variabile ad ogni ciclo
@@ -1285,7 +1298,10 @@ Public Class AlarmsPageUC
             If m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
                bRead = True
                Dim dVal As Double = m_MainWindow.m_CNCommunication.m_CN.d_DReadELS_value
-               dVal = dVal / 1000
+               ' Se fanuc il dato è in mm (NON MICRON)
+               If m_MainWindow.m_CNCommunication.m_nNCType <> 4 Then
+                  dVal = dVal / 1000
+               End If
                MsgBoxStateInfo.LoadingPrBr_Value = 100
                ' Tastatura conclusa con successo
                Dim sOut As String = EgtMsg(MSG_DIRECTCUTPAGEUC + 43) & " : " & DoubleToString(dVal, 1)

Machine/CurrentMachine.vb

@@ -1351,6 +1351,29 @@ Public Class CurrentMachine
       m_nEnableBarCodeReader = GetPrivateProfileInt(S_MACH_BARCODEREADER, K_ENABLEBCR, 0, sMachIniFile)
    End Sub
 
+   ' Per il controllo FANUC al momento dell'inizializzazione del CN devono essere lette alcune variabili
+   Public Sub InitFANUC(CN_Generic As CN_generico)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nResetSendDelay = GetPrivateProfileInt(S_NCFANUC, K_RESETSENDDELAY, 1000, sMachIniFile)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nThreadSleep = GetPrivateProfileInt(S_NCFANUC, K_THREADSLEEP, 150, sMachIniFile)
+      ' Leggo i dati strettamente correlati alla comunicazione NC-PC
+      Dim CN As CN_generico = CN_Generic
+      ' Leggo l'indirizzo in cui scrivere lo stato macchina
+      Dim dAddNcMode As String = CN.s_addr_set_nc_mode
+      GetPrivateProfileString(S_NCFANUC, K_SETNCMODE, CN.s_addr_set_nc_mode, CN.s_addr_set_nc_mode, sMachIniFile)
+      ' Leggo primo indirizzo libero delle variabili di tipo intero
+      CN.n_Base_addr_int_vars = GetPrivateProfileInt(S_NCFANUC, K_BASEADDRINT, CN.n_Base_addr_int_vars, sMachIniFile)
+      ' Leggo primo indirizzo libero delle variabili di tipo bit
+      CN.n_Base_addr_byte_for_bits_vars = GetPrivateProfileInt(S_NCFANUC, K_BASEADDRBIT, CN.n_Base_addr_byte_for_bits_vars, sMachIniFile)
+      ' Leggo numero di variabili di tipo intero
+      CN.n_num_var_int_to_read = CShort(GetPrivateProfileInt(S_NCFANUC, K_NUMVARINT, CInt(CN.n_num_var_int_to_read), sMachIniFile))
+      ' Leggo numero di varibili di tipo bit
+      CN.n_num_var_byte_for_bits_to_read = CShort(GetPrivateProfileInt(S_NCFANUC, K_NUMVARBIT, CInt(CN.n_num_var_byte_for_bits_to_read), sMachIniFile))
+      ' Leggo variabile abilitata alla gestione di FeedHold
+      GetPrivateProfileString(S_NCFANUC, K_SETNCMODE, CN.s_addr_feedhold, CN.s_addr_feedhold, sMachIniFile)
+   End Sub
+
    Public Sub LoadWJMaterial(Optional bIsStart As Boolean = False)
       Dim TempCurrMat As Material = CurrMat
       ' Svuoto l'attuale lista di materiali

Machine/MachineCNPageUC.xaml

@@ -62,7 +62,7 @@
                   <ColumnDefinition Width="2*"/>
                </Grid.ColumnDefinitions>
 
-                    <Button Name="StartBtn" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="StartBtn" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
                <Button Name="StopBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
                <Button Name="ResetBtn" Grid.Column="2"

Machine/MachineStatusUC.xaml.vb

@@ -248,16 +248,16 @@ Public Class MachineStatusUC
          dL3 = ptTip.z
       End If
       ' Visualizzazione
-      Axis1TxBx.Text = LenToString(dL1, -3)
-      Axis2TxBx.Text = LenToString(dL2, -3)
-      Axis3TxBx.Text = LenToString(dL3, -3)
+      Axis1TxBx.Text = LenToString(dL1, -3, True)
+      Axis2TxBx.Text = LenToString(dL2, -3, True)
+      Axis3TxBx.Text = LenToString(dL3, -3, True)
       Axis4TxBx.Text = DoubleToString(dR1, -3)
       Axis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then Axis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayPositionDelta()
@@ -265,22 +265,22 @@ Public Class MachineStatusUC
       Dim dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10 As Double
       m_MainWindow.m_CNCommunication.GetAxesDeltas(dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10)
       ' Visualizzazione
-      DeltaAxis1TxBx.Text = LenToString(dL1, -3)
-      DeltaAxis2TxBx.Text = LenToString(dL2, -3)
-      DeltaAxis3TxBx.Text = LenToString(dL3, -3)
+      DeltaAxis1TxBx.Text = LenToString(dL1, -3, True)
+      DeltaAxis2TxBx.Text = LenToString(dL2, -3, True)
+      DeltaAxis3TxBx.Text = LenToString(dL3, -3, True)
       DeltaAxis4TxBx.Text = DoubleToString(dR1, -3)
       DeltaAxis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then DeltaAxis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayFeed()
       Dim dRealFeed As Double = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
       'Feed = DoubleToString(dRealFeed, 0)
-      FeedTxBx.Text = LenToString(dRealFeed, 0)
+      FeedTxBx.Text = LenToString(dRealFeed, 0, True)
       'FeedOverride = DoubleToString(m_CN.d_DInterpo_Feed_override, 0) & "%"
       Dim dFeedOverride As Double = m_CN.d_DInterpo_Feed_override
       FeedOverrideTxBx.Text = DoubleToString(dFeedOverride, 0) & "%"
@@ -304,6 +304,8 @@ Public Class MachineStatusUC
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          dSpindlePower = m_CN.d_data(0)
          dSpindleOvr = m_CN.d_data(1)
+      ElseIf m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         dSpindlePower = m_CN.d_spindle_power / 1000
       Else
          dSpindlePower = m_CN.d_spindle_power
          dSpindleOvr = If(m_CN.bPowerOvr > 0, m_CN.d_spindle_power / m_CN.bPowerOvr * 100, 0)

MainWindow.xaml.vb

@@ -38,6 +38,8 @@ Class MainWindow
    Friend m_MachinePageUC As MachinePageUC
    Friend m_OptionsPageUC As OptionsPageUC
 
+   Friend m_IsClosingApplication As Integer = 0
+
    ' Dichiarazione variabili direttori
    Private m_sExeRoot As String = String.Empty
    Private m_sDataRoot As String = String.Empty
@@ -326,8 +328,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2501, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2501, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2503, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2503, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -1085,6 +1087,19 @@ Class MainWindow
          m_CurrentProjectPageUC.SaveNamedProject()
          m_CurrentProjectPageUC.SaveProject()
       End If
+      ' Inizio la chiusura del programma (verifico di aver terminato il processo DripFeed)
+      EgtOutLog("Iniziato processo di chiusura programma")
+      m_IsClosingApplication = 1
+      Dim nCount As Integer = 0
+      While m_IsClosingApplication <> 2
+         If nCount > 5 Then
+            Exit While
+         End If
+         ' verifico che il processo DripFeed sia terminato
+         EgtOutLog("Stato chiusura programma: " & m_IsClosingApplication.ToString)
+         Thread.Sleep(100)
+         nCount += 1
+      End While
       ' Uscita
       MainWindowExit()
    End Sub

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.5.1.2")>
-<Assembly: AssemblyFileVersion("2.5.1.2")>
+<Assembly: AssemblyVersion("2.5.3.1")>
+<Assembly: AssemblyFileVersion("2.5.3.1")>

NcComm/CNCommunication.vb

@@ -2,6 +2,9 @@
 Imports System.Globalization
 Imports System.Collections.ObjectModel
 Imports EgtUILib
+Imports OmagCUT.Num
+Imports System.IO
+Imports System.Text
 
 Public Class CNCommunication
 
@@ -31,6 +34,7 @@ Public Class CNCommunication
    Private m_bNewDeltaData As Boolean = True
    Private m_bNewVarData As Boolean = False
    Private m_bTimerBusy As Boolean = False
+   Private m_bTimerAxesBusy As Boolean = False
 
    Private m_IsNewConsole As Boolean = False
 
@@ -39,6 +43,7 @@ Public Class CNCommunication
 
    ' Timer
    Private m_RefreshTimer As New DispatcherTimer
+   Private m_RefreshAxesFanuc As New DispatcherTimer
 
    ' Nomi e indici degli assi macchina
    Private m_bAxesOk As Boolean = False
@@ -101,6 +106,12 @@ Public Class CNCommunication
          m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(100)
          m_RefreshTimer.Start()
       End If
+      ' solo per controllo FANUC creo un timer apposito solo per la lettura degli assi
+      If m_nNCType = 4 Then
+         AddHandler m_RefreshAxesFanuc.Tick, AddressOf RefreshAxesFanucTimer_tick
+         m_RefreshAxesFanuc.Interval = TimeSpan.FromMilliseconds(50)
+         m_RefreshAxesFanuc.Start()
+      End If
 
       ' Leggo dati sugli assi della macchina
       ReadAxesData()
@@ -117,6 +128,8 @@ Public Class CNCommunication
 
          If m_nNCType = 3 Then
             RefreshNoEvents()
+         ElseIf m_nNCType = 4 Then
+            RefreshFANUC()
          Else
             Refresh()
          End If
@@ -129,8 +142,22 @@ Public Class CNCommunication
 
    End Sub
 
+   Private Sub RefreshAxesFanucTimer_tick()
+      If Not m_bTimerAxesBusy Then
+         m_bTimerAxesBusy = True
+         m_RefreshAxesFanuc.Stop()
+
+         RefreshAxesFANUC()
+
+         m_bTimerAxesBusy = False
+         m_RefreshAxesFanuc.Start()
+      Else
+         Dim nDummy As Integer = 10
+      End If
+   End Sub
+
    Private Sub ReadAxesData()
-      ' Nomi e indici degli assi macchina
+      ' Nomi e indici degli assi macchina: definisco il nome degli assi da satampare nella pagina MachineStatusUC
       m_bAxesOk = True
       GetPrivateProfileString(S_AXES, K_L1NAME, "X", m_sA1, m_MainWindow.GetMachIniFile())
       m_nA1 = GetPrivateProfileInt(S_AXES, K_L1ID, 0, m_MainWindow.GetMachIniFile())
@@ -222,6 +249,11 @@ Public Class CNCommunication
                m_CN = New Num.NumNC
             Case 3
                m_CN = New CN_Siemens
+            Case 4
+               ' Fanuc
+               m_CN = New Fanuc.Fanuc
+               ' proveddo a sovrscrivere i datti di comunicazione PC-NC settati di default nella classe CN_Generico
+               m_MainWindow.m_CurrentMachine.InitFANUC(m_CN)
          End Select
          ' Recupero la stringa di inizializzazione della comunicazione
 
@@ -354,8 +386,13 @@ Public Class CNCommunication
             If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.Remote, sVal)
          End If
 
-            ' Inizializzo la comunicazione
-            m_CN.Init()
+         ' Solo per controllo FANUNC
+         GetPrivateProfileString(S_NCDATA, K_NAXES, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.nAxes, sVal)
+
+
+         ' Inizializzo la comunicazione
+         m_CN.Init()
 
       Catch ex As Exception
          ' set status to statusbar
@@ -418,6 +455,17 @@ Public Class CNCommunication
                   m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Red")
                End Try
             End If
+         Case 4
+            If IsNothing(m_CN) OrElse m_CN.n_state < 2 Then
+               ' Per evitare crash con azioni verso il controllo, avvio quello di debug
+               m_nNCType = 0
+               Me.m_CN = New CN_Debug
+               m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Red")
+            Else
+               ' ATTENZIONE: durante l'inizializzazione della classe il vettore che contiene tutti gli indirizzi di memoria non è caricato
+               m_CN.b_axis_events_enable = True
+               m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_DarkGray")
+            End If
       End Select
 
       ' Assegno riferimento al CN alle diverse pagine
@@ -464,6 +512,7 @@ Public Class CNCommunication
          m_MachineStatus.DisplayPositionDelta()
       End If
 
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
       If m_CN.b_feed_changed Then
          m_CN.b_feed_changed = False
          m_MachineStatus.DisplayFeed()
@@ -490,12 +539,14 @@ Public Class CNCommunication
          'FrmMain.LblToolRad.Text = cn.Tools(0).radius.ToString
          'FrmMain.LblToolComp.Text = cn.Tools(0).comp_num.ToString
       End If
+      ' ----- FINE : lettura diretta di specifiche vaiabili -----
 
       Select Case m_nNCType
          Case 1
             If m_CN.read_active_mode() <> m_nCurrMode Then
                m_nCurrMode = m_CN.read_active_mode()
                m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+               m_CN.nMachineMode = m_nCurrMode
             End If
          Case 2
             If m_CN.nMachineMode <> m_nCurrMode Then
@@ -530,6 +581,7 @@ Public Class CNCommunication
          'End If
       End If
 
+      ' QUESTE VARIABILI NON SONO LETTE IN QUANTO NON SONO STATE CARICATE → vedere come esempio il NUM che assegna queste variabili
       ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
       If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
          If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
@@ -568,8 +620,14 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.CloseAllChanged(m_CN.bCloseAllState)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open123Changed(m_CN.bOpen123State)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open456Changed(m_CN.bOpen456State)
-            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
-            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            ' in assenza della configurazione delle variabili Close123 e Close456
+            If Not String.IsNullOrEmpty(m_CN.m_szCnDataVar(CN_generico.CnData.Close123State)) Then
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(Not m_CN.bOpen123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(Not m_CN.bOpen456State)
+            End If
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BlowChanged(m_CN.bBlowState)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOnChanged(m_CN.bVacuumOn)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOffChanged(m_CN.bVacuumOff)
@@ -619,12 +677,189 @@ Public Class CNCommunication
       End If
 
       ' Nuove bottoni (Power Macchina)
-      If m_IsNewConsole AndAlso m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
-         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
-         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         If m_IsNewConsole Then
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+         End If
          m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
       End If
 
+
+
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.WorkInProgress Then
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.LaserTracStateChanged(m_CN.bLaserTracState)
+         If m_CN.Is_G24_active() Then
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ThreeAxisStateChanged(False)
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.FiveAxisStateChanged(True)
+         Else
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.FiveAxisStateChanged(False)
+         End If
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
+      End If
+
+   End Sub
+
+   Private Sub RefreshAxesFANUC()
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
+      ' avvio lettura variabili da CN
+      m_CN.Geppo()
+      ' notifico valori all'interfaccia
+      m_MachineStatus.DisplayPosition()
+      m_MachineStatus.DisplayPositionDelta()
+      m_MachineStatus.DisplayFeed()
+      m_MachineStatus.DisplaySpeed()
+      m_MachineStatus.DisplayPower()
+   End Sub
+
+   Private Sub RefreshFANUC()
+      ' Copia della funzione Refresh
+
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
+      '' avvio lettura variabili da CN
+      'm_CN.Geppo()
+      '' notifico valori all'interfaccia
+      'm_MachineStatus.DisplayPosition()
+      'm_MachineStatus.DisplayPositionDelta()
+      'm_MachineStatus.DisplayFeed()
+      'm_MachineStatus.DisplaySpeed()
+      'm_MachineStatus.DisplayPower()
+      ' eventualmente carico messaggi di errore
+      ErrorList.Clear()
+      If m_CN.b_NC_error Then
+         ErrorList.Clear()
+         SyncLock m_CN
+            For Each Item As String In m_CN.sz_NC_error_messages
+               ErrorList.Add(Item)
+            Next
+         End SyncLock
+      End If
+      m_AlarmsPage.NcError()
+      ' ----- FINE  : lettura diretta di specifiche vaiabili -----
+
+      If m_CN.read_active_mode() <> CShort(m_nCurrMode) Then
+         m_nCurrMode = CInt(m_CN.read_active_mode())
+         m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+         m_CN.nMachineMode = m_nCurrMode
+      End If
+
+      ' QUESTE VARIABILI NON SONO LETTE IN QUANTO NON SONO STATE CARICATE → vedere come esempio il NUM che assegna queste variabili
+      ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
+         If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.SpindleStateChanged(m_CN.bSpindleState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LaserStateChanged(m_CN.bLaserState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LaserTracStateChanged(m_CN.bLaserTracState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.CoolantStateChanged(m_CN.bCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.InternalCoolantStateChanged(m_CN.bInternalCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ExternCoolantStateChanged(m_CN.bExternCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.CBAxesStateChanged(m_CN.bCBAxesState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.AirBlowStateChanged(m_CN.bAirBlowState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.HomeStateChanged(m_CN.bHomeState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.TableDownChanged(m_CN.bTableDownState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.DoorClosedChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LimitZChanged(m_CN.bLimitZState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.FiveAxisStateChanged(m_CN.Is_G24_active())
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ParkingStateChanged(m_CN.bParkingState)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ZoneStateChanged(m_CN.nEnableZone)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.PcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumUpChanged(m_CN.bVacuumUp)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumDownChanged(m_CN.bVacuumDown)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2UpChanged(m_CN.bVacuum2Up)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2DownChanged(m_CN.bVacuum2Down)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum0Changed(m_CN.bVacuum0)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum90Changed(m_CN.bVacuum90)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum1Changed(m_CN.bVacuum1State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2Changed(m_CN.bVacuum2State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum3Changed(m_CN.bVacuum3State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum4Changed(m_CN.bVacuum4State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum5Changed(m_CN.bVacuum5State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum6Changed(m_CN.bVacuum6State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum135Changed(m_CN.bVacuum135State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum246Changed(m_CN.bVacuum246State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.OpenAllChanged(m_CN.bOpenAllState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.CloseAllChanged(m_CN.bCloseAllState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open123Changed(m_CN.bOpen123State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open456Changed(m_CN.bOpen456State)
+            ' in assenza della configurazione delle variabili Close123 e Close456
+            If Not String.IsNullOrEmpty(m_CN.m_szCnDataVar(CN_generico.CnData.Close123State)) Then
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(Not m_CN.bOpen123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(Not m_CN.bOpen456State)
+            End If
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BlowChanged(m_CN.bBlowState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOnChanged(m_CN.bVacuumOn)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOffChanged(m_CN.bVacuumOff)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BypassChanged(m_CN.bBypassState)
+
+            ' Nuovi bottoni (uso joystick)
+            If m_IsNewConsole Then
+               m_MainWindow.m_DirectCutPageUC.XYJogChanged(m_CN.bXYJog)
+               m_MainWindow.m_DirectCutPageUC.ZCJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.ZBJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
+            End If
+         Else
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserTracStateChanged(m_CN.bLaserTracState)
+            If m_CN.Is_G24_active() Then
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(False)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(True)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(False)
+            End If
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
+
+            ' Nuovi bottoni (uso joystick) per Area4
+            If m_IsNewConsole Then
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.XYJogChanged(m_CN.bXYJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
+            End If
+
+         End If
+      End If
+
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.RawPart Then
+         m_MainWindow.m_RawPartPage.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+      End If
+
+      ' Nuove bottoni (Power Macchina)
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         If m_IsNewConsole Then
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+         End If
+         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+      End If
+
+
+
       If m_MainWindow.m_ActivePage = MainWindow.Pages.WorkInProgress Then
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
@@ -907,28 +1142,84 @@ Public Class CNCommunication
          End If
          ' Se richiesta successiva attivazione, faccio reset
          If bActivate Then
+            EgtOutLog("Call function: DGeneralFunctions_Reset")
+            TimeSpanInit()
             m_CN.DGeneralFunctions_Reset()
+            EgtOutLog(TimeSpanEnd())
          End If
          ' Attesa opportuna
          System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nResetSendDelay)
          If m_nNCType = 1 Then
             ' Cancellazione eventuale file già presente con lo stesso nome (ignoro eventuale errore)
+            EgtOutLog("Delete_NC_prog(sNumProg)")
+            TimeSpanInit()
             m_CN.Delete_NC_prog(sNumProg)
+            EgtOutLog(TimeSpanEnd())
             ' Attesa opportuna
             System.Threading.Thread.Sleep(100)
+         ElseIf m_nNCType = 4 Then
+            ' FANUC: imposto modalità EDIT 
+            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(1) = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
          End If
+         EgtOutLog("Download_NC_prog(sCncPath, sNumProg)")
+         ' -------------- START DOWNLOAD -------------- 
+         TimeSpanInit()
          bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
          ' Attesa opportuna
          System.Threading.Thread.Sleep(100)
+         ' FANUC: genero un file 901 vuoto da aspedire, attivare; poi rispedisco il file 900
+         If m_nNCType = 4 And Not bOk Then
+            bOk = True
+            Dim sCncPath1 As String = m_MainWindow.GetCncDir() & "\PlaceHolder" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+            Dim fs As FileStream = File.Create(sCncPath1)
+            ' Add text to the file.
+            Dim info As Byte() = New UTF8Encoding(True).GetBytes(vbLf & "(PlaceHolder)")
+            fs.Write(info, 0, info.Length)
+            fs.Close()
+            bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath1, "901") = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+            If bActivate Then
+               bOk = bOk AndAlso (m_CN.ActivateProgram("901") = 0)
+               ' Attesa opportuna
+               System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+            End If
+            ' riprovo ad eseguire il programma 900
+            bOk = True
+            bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+         End If
+         EgtOutLog("Nc Type : " & m_nNCType.ToString)
+         ' AXIUM (NUM OLD): se DripFeed non esegluo attivazione programma)
+         If m_nNCType = 1 AndAlso TypeOf m_CN Is NumNCOld AndAlso DirectCast(m_CN, NumNCOld).bIsDripFeed Then
+            ' eventauli cambi di stato sono trattati all'interno della funzione DownLoad_NC_prog
+            Return True
+         End If
+         EgtOutLog(TimeSpanEnd())
+         ' --------------  END  DOWNLOAD -------------- 
+         ' -------------- START ACTIVATE -------------- 
          ' Se richiesta attivazione
          If bActivate Then
             ' Attivazione programma
+            EgtOutLog("ActivateProgram(nNumProg)")
+            TimeSpanInit()
             bOk = bOk AndAlso (m_CN.ActivateProgram(nNumProg) = 0)
+            EgtOutLog(TimeSpanEnd())
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(100)
+            ' Attivo la modalità AUTO prima per preparar il cyclo start
+            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(0) = 0)
             ' Attesa opportuna
             System.Threading.Thread.Sleep(100)
             ' Modalità automatica
-            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(0) = 0)
+            EgtOutLog("DGeneralFunctions_WriteCncMode(0)")
+            TimeSpanInit()
+            EgtOutLog(TimeSpanEnd())
          End If
+         ' --------------  END  ACTIVATE -------------- 
          ' Messaggio con risultato
          If bOk Then
             m_CurrProjPage.SetInfoMessage(EgtMsg(90317))        'Programma CN trasmesso con successo

NcComm/CN_generico.vb

@@ -8,7 +8,7 @@ Public MustInherit Class CN_generico
    Public Const MAX_VAR As Short = 100
    Public Const MAX_VALUES As Short = 9           ' Max. index to read the data from the FXServer array
    Public Const MAX_TOOLS As Short = 100
-   Public Const NUM_DATA = 55                     ' Numero di dati del CN (Speed,Feed,...)
+   Public Const NUM_DATA = 56                     ' Numero di dati del CN (Speed,Feed,...)
 
    Public m_NewVariable As Boolean = False        ' per scrittura delle vairbaili Apllication del PLC
 
@@ -70,8 +70,18 @@ Public MustInherit Class CN_generico
       Parking = 52
       EnableZone = 53
       EnablePC = 54
+
+      nAxes = 55
    End Enum
 
+   Public Enum Type As Short
+      TBoolean = 0
+      TInteger = 1
+      TLong = 2
+      TDouble = 3
+      TString = 4
+
+   End Enum
 #End Region
 
 #Region " Struct"
@@ -218,10 +228,24 @@ Public MustInherit Class CN_generico
    Public bRemote As Boolean
    ' Nuovi di bottoni -------------------------------------------
 
+   ' usato nel FANUC per leggere lo stato macchina se 5 assi attivo
+   Public b5AxesActive As Boolean
+
    Public nMachineMode As Integer
 
    Public m_szCnDataVar(NUM_DATA - 1) As String
-
+   '
+   ' nuovi dal 29-III-2023 per Fanuc
+   '
+   Public n_Base_addr_int_vars As Integer = 59800
+   Public n_Base_addr_byte_for_bits_vars As Integer = 59820
+   Public n_num_var_int_to_read As Short = 10
+   Public n_num_var_byte_for_bits_to_read As Short = 30
+   Public s_addr_set_nc_mode As String = "D59825"
+   Public s_addr_feedhold As String = "D59850.6"
+   '
+   ' Eventi
+   '
    Public Event NewPositionData(ByVal sender As Object)
    Public Event NewPosDeltaData(ByVal sender As Object)
    Public Event NewVarChanged(ByVal sender As Object)
@@ -294,8 +318,8 @@ Public MustInherit Class CN_generico
 
    Public MustOverride Function DTool_set_read_range(n_start As Short, n_stop As Short) As Short
 
-   Public MustOverride Function DTool_write_tool(n_tool_number As Short, Length_X As Double, Radius As Double, TipRadius_Z As Double, _
-                                    DLength_X As Double, DTipRadius_Z As Double, _
+   Public MustOverride Function DTool_write_tool(n_tool_number As Short, Length_X As Double, Radius As Double, TipRadius_Z As Double,
+                                    DLength_X As Double, DTipRadius_Z As Double,
                                     nDirection As Short, nType As Short, nH As Integer) As Short
 
    Public Overridable Function SetProgramMainOrSub(bMain As Boolean) As Boolean
@@ -341,4 +365,36 @@ Public MustInherit Class CN_generico
 
 #End Region
 
+#Region " Nuovi metodi pubblici"
+
+   Public Overridable Function NC_read_var_short(VarAddr As String, ByRef value As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_read_var_short_range(VarStartAddr As String, VarEndAddr As String, ByRef values() As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_write_var_short(VarAddr As String, ByRef value As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_read_var_bit(VarAddr As String, ByRef value As Boolean) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_write_var_bit(VarAddr As String, ByRef value As Boolean) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_pulse_bit(VarAddr As String) As Boolean
+      Return False
+   End Function
+   Public Overridable Function Geppo() As Boolean
+      Return False
+   End Function
+
+#End Region
+
+
 End Class

OmagCUT.vbproj

@@ -122,11 +122,13 @@
       <SpecificVersion>False</SpecificVersion>
       <HintPath>..\..\EgtProg\DllD32\EgtUILib.dll</HintPath>
     </Reference>
-    <Reference Include="EgtWPFLib">
-      <HintPath>..\..\EgtProg\DllD32\EgtWPFLib.dll</HintPath>
+    <Reference Include="EgtWPFLib, Version=2.5.2.2, Culture=neutral, processorArchitecture=MSIL">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\EgtProg\Dll32\EgtWPFLib.dll</HintPath>
     </Reference>
-    <Reference Include="EgtWPFLib5">
-      <HintPath>..\..\EgtProg\OmagCUT\EgtWPFLib5.dll</HintPath>
+    <Reference Include="EgtWPFLib5, Version=2.5.2.2, Culture=neutral, processorArchitecture=MSIL">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\EgtProg\Dll32\EgtWPFLib5.dll</HintPath>
     </Reference>
     <Reference Include="Interop.FXLib">
       <HintPath>..\..\EgtProg\OmagCUT\Interop.FXLib.dll</HintPath>
@@ -225,6 +227,9 @@
     <Compile Include="Machine\WaterJetPageUC.xaml.vb">
       <DependentUpon>WaterJetPageUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="NcComm\fwlib32.vb" />
+    <Compile Include="NcComm\M_Fanuc.vb" />
+    <Compile Include="NcComm\M_Fanuc_hi.vb" />
     <Compile Include="Project\AddToDataBaseUC.xaml.vb">
       <DependentUpon>AddToDataBaseUC.xaml</DependentUpon>
     </Compile>

Project/ProjectMgrUC.xaml.vb

@@ -1,4 +1,6 @@
-Imports System.IO
+Imports System.ComponentModel
+Imports System.Drawing
+Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib
 
@@ -478,7 +480,6 @@ Public Class ProjectMgrUC
       If Not (m_CurrMachine.bProdLine Or m_CurrMachine.bDemo) Then
          ' Download programma (eventuali errori sono segnalati dalla funzione)
          If m_CurrNcComm.SendProgram(sCncPath, 900) Then
-            ' copio il progetto corrente come progetto in lavorazione
             Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
             My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
             ' se abilitato e non è restart, lancio eventuale lua post-trasmissione

RawPhoto/RawPartPageUC.xaml.vb

@@ -2052,6 +2052,18 @@ Public Class RawPartPageUC
       ' Recupero origine tavola rispetto allo 0 macchina
       Dim TableRef As Point3d
       EgtGetTableRef(1, TableRef)
+      ' imposto modo automatico
+      Select Case m_MainWindow.m_CNCommunication.m_nNCType
+         Case 1, 2
+            ' in attesa di verifica 
+         Case 3
+            Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(0)
+            EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+         Case 4
+            ' FANUC - Manual:7, Edit:1
+            Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(7)
+            EgtOutLog("Impostata modalità manuale: esito " & nResult.ToString)
+      End Select
       ' Recupero file LUA
       EgtLuaExecFile(m_CurrentMachine.sMachDir() & "\DirectCmd\RawProbing.lua")
       ' Imposto parametri
@@ -2089,6 +2101,11 @@ Public Class RawPartPageUC
       End If
       m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
       EgtOutLog("RawProbing : sent NC program")
+      ' Se fanuc passo in modalità AUTO e attivo
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(0)
+         EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+      End If
       ' Aspetto e lo avvio
       System.Threading.Thread.Sleep(300)
       m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
@@ -2154,6 +2171,10 @@ Public Class RawPartPageUC
                Else
                   RawThickness *= ONEMM / 1000
                End If
+               ' Se fanuc il dato è in mm (NON MICRON)
+               If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+                  RawThickness *= 1000
+               End If
                ' Sottraggo eventuale spessore sovratavola
                RawThickness -= m_CurrentMachine.dAdditionalTable
                ' Imposto spessore misurato come altezza grezzo

Simulation/SimulationPageUC.xaml.vb

@@ -567,6 +567,11 @@ Public Class SimulationPageUC
    End Sub
 
    Private Sub GenerateXPIUC_Click(sender As Object, e As RoutedEventArgs)
+      ' se il bottone Shift è premuto apro il file CadCut1 nel programma NotePad
+      Dim IsPressedShiftKey As Boolean = False
+      If Keyboard.Modifiers And ModifierKeys.Shift Then
+         IsPressedShiftKey = True
+      End If
       Dim bOk As Boolean = True
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Elimino eventuale attrezzaggio da OmagOFFICE
@@ -669,6 +674,15 @@ Public Class SimulationPageUC
       Else
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
       End If
+      ' procedo all'apertura del file CadCut1 apenna generato (solo se generazione corretta)
+      If bOk And IsPressedShiftKey Then
+         Try
+            Process.Start("Notepad.exe", sCncPath)
+         Catch ex As Exception
+            EgtOutLog(ex.ToString)
+         End Try
+
+      End If
    End Sub
 
    Private Function ProcessEvents(nProg As Integer, nPause As Integer) As Integer

Utility/Utility.vb

@@ -1,4 +1,5 @@
 Imports System.Globalization
+Imports System.Diagnostics
 Imports System.Collections.ObjectModel
 Imports System.Text.RegularExpressions
 Imports EgtWPFLib
@@ -17,8 +18,25 @@ Module Utility
    End Function
 
 
-   '--------------------------------------------------------------------------------------------------
-   Friend Sub UpdateUI()
+    Friend StopWatch As Stopwatch
+
+    Friend Sub TimeSpanInit()
+        StopWatch = New Stopwatch
+        StopWatch.Start()
+    End Sub
+
+    Friend Function TimeSpanEnd()
+        Dim sTime As String = ""
+        If Not IsNothing(StopWatch) Then
+            StopWatch.Stop()
+            Dim ts As TimeSpan = StopWatch.Elapsed
+            sTime = String.Format("{0:00}:{1:00}:{2:00}.{3:000}", ts.Hours, ts.Minutes, ts.Seconds, ts.Milliseconds)
+        End If
+        Return sTime
+    End Function
+
+    '--------------------------------------------------------------------------------------------------
+    Friend Sub UpdateUI()
       ' Costringo ad aggiornare UI
       Dim nDummy As Integer
       Application.Current.Dispatcher.Invoke(Windows.Threading.DispatcherPriority.Background, _
@@ -187,10 +205,10 @@ Module Utility
    End Function
 
    ' conerte il dato (in mm) in stringa nell'unità corrente
-   Friend Function LenToString(dVal As Double, nNumDec As Integer) As String
+   Friend Function LenToString(dVal As Double, nNumDec As Integer, Optional ByVal bForceToDecimal As Boolean = False) As String
       Dim sVal As String = DoubleToString(EgtToUiUnits(dVal), nNumDec)
       ' se richiesta scrittura in frazione (solo se unità corrente INCHES)
-      If nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM() Then
+      If (nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM()) And Not bForceToDecimal Then
          ' conevrto il dato corrente in decimale
          Dim dCurrVal As Double = dVal
          StringToDouble(sVal, dCurrVal)
@@ -199,10 +217,10 @@ Module Utility
       Return sVal
    End Function
 
-   Friend Function StringToLen(sVal As String, ByRef dVal As Double) As Boolean
+   Friend Function StringToLen(sVal As String, ByRef dVal As Double, Optional ByVal bForceToDecimal As Boolean = False) As Boolean
       If String.IsNullOrEmpty(sVal) Then Return False
 
-      If nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM() Then
+      If (nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM()) And Not bForceToDecimal Then
          Dim sValSource As String = sVal
          ' conevrto la stringa in formato decimale (sempre in stringa)
          StringFractionToStringDecimal(sValSource, sVal)