Inserita gestione Flag per Rettificata tagli inclinati

- in VerifyOutOfStrokes prima di controllare il valore dell'asse C si cerca di riportarlo nel range ammesso (modulo 360 gradi).

CAM/CamAuto.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Forms.Integration
+Imports EgtUILib
 
 Friend Module CamAuto
 
@@ -29,7 +30,7 @@ Friend Module CamAuto
       Return bOk
    End Function
 
-   Friend Function AddWaterJetMachining( nOperId As Integer, ByRef nWarn As Integer) As Boolean
+   Friend Function AddWaterJetMachining(nOperId As Integer, ByRef nWarn As Integer) As Boolean
       EgtLuaCreateGlobTable("CAM")
       SetLuaStandardCamParams()
       EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
@@ -93,7 +94,7 @@ Friend Module CamAuto
       If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS Then
          ' Reinserisco tutte le lavorazioni piane
          AddMachinings(GDB_ID.NULL, nWarn)
-      ' Se altrimenti progetto con cornici
+         ' Se altrimenti progetto con cornici
       ElseIf nPrjType = CurrentProjectPageUC.PRJ_TYPE.FRAMES Then
          ' Reinserisco tutte le lavorazioni delle cornici
          AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
@@ -101,6 +102,98 @@ Friend Module CamAuto
       Return True
    End Function
 
+   Friend Function ResetAllSplitCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllStartCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllBRidges() As Boolean
+      Dim bOk As Boolean = True
+      Dim nMachGroup As Integer = EgtGetCurrMachGroup()
+      Dim nBridgesGroup As Integer = EgtGetFirstNameInGroup(nMachGroup, "Bridges")
+      bOk = EgtErase(nBridgesGroup)
+      Return bOk
+   End Function
+
+   Friend Function ResetAllRawPart() As Boolean
+      Dim nPhase As Integer = 1
+      Dim nOtherRaw As Integer = EgtGetFirstRawPart()
+      While nOtherRaw <> GDB_ID.NULL
+         ' se il pezzo non appartiene alla prima fase allora viene eliminato
+         If Not EgtVerifyRawPartPhase(nOtherRaw, nPhase) Then
+            Dim NextRaw As Integer = EgtGetNextRawPart(nOtherRaw)
+            EgtRemoveRawPart(nOtherRaw)
+            nOtherRaw = NextRaw
+         Else
+            nOtherRaw = EgtGetNextRawPart(nOtherRaw)
+         End If
+      End While
+      Return True
+   End Function
+
+   ' verifico che il contorno passato non sia stato separato
+   Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer)
+      Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+      While nIdMy <> GDB_ID.NULL
+         Dim nValInfo As Integer = 1
+         If EgtGetInfo(nIdMy, INFO_JOINENTITY, nValInfo) Then
+            If nValInfo = 0 Then Return False
+         End If
+         EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return True
+   End Function
+
    Friend Function RemoveFinalEmptyPhases() As Boolean
       Dim nOpeId As Integer = EgtGetLastOperation()
       While nOpeId <> GDB_ID.NULL
@@ -674,6 +767,9 @@ Friend Module CamAuto
       End If
       ' Lo sposto dalla lavorazione al pezzo
       Dim nId As Integer = EgtGetFirstInGroup(nMchPvId)
+
+      If nId = GDB_ID.NULL Then Return False
+
       While nId <> GDB_ID.NULL
          EgtRelocateGlob(nId, nPartPvId)
          nId = EgtGetFirstInGroup(nMchPvId)
@@ -719,10 +815,12 @@ Friend Module CamAuto
    End Function
 
    Private Function SetLuaStandardCamParams(Optional bDripOk As Boolean = True) As Boolean
+      Dim sMaterial As String = m_MainWindow.m_CurrentMachine.CurrMat.sName
       Dim sSawMch As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       Dim sMillMch As String = m_MainWindow.m_CurrentMachine.sCurrMilling
       Dim sDrillMch As String = m_MainWindow.m_CurrentMachine.sCurrDrilling
       Dim sWaterJetMch As String = m_MainWindow.m_CurrentMachine.sCurrWaterJetting
+      Dim sWaterJetQual As String = m_MainWindow.m_CurrentMachine.sCurrWaterJettingQuality
       Dim sPocketMch As String = m_MainWindow.m_CurrentMachine.sCurrPocketing
       Dim sDripSawMch As String = If(bDripOk, m_MainWindow.m_CurrentMachine.sCurrDripSawing, "")
       Dim sDripDrillMch As String = If(bDripOk, m_MainWindow.m_CurrentMachine.sCurrDripDrilling, "")
@@ -735,11 +833,13 @@ Friend Module CamAuto
       Dim bMillingOnCorners As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
       Dim bMillingOnSinks As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
       Dim dMillingShort As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
+      EgtLuaSetGlobStringVar("CAM.MATERIAL", sMaterial)
       EgtLuaSetGlobStringVar("CAM.SAWMCH", sSawMch)
       EgtLuaSetGlobStringVar("CAM.MILLMCH", sMillMch)
       EgtLuaSetGlobStringVar("CAM.DRILLMCH", sDrillMch)
       EgtLuaSetGlobStringVar("CAM.POCKETMCH", sPocketMch)
       EgtLuaSetGlobStringVar("CAM.WATERJETMCH", sWaterJetMch)
+      EgtLuaSetGlobStringVar("CAM.WATERJETQLTY", sWaterJetQual)
       EgtLuaSetGlobStringVar("CAM.DRIPSAWMCH", sDripSawMch)
       EgtLuaSetGlobStringVar("CAM.DRIPDRILLMCH", sDripDrillMch)
       EgtLuaSetGlobNumVar("CAM.REDUCEDDEPTH", dReducedDepth)

CadCuts/CSVFile.vb

@@ -1,5 +1,5 @@
 Imports EgtUILib
-
+Imports System.IO
 
 Friend Module CSVFile
 
@@ -7,6 +7,7 @@ Friend Module CSVFile
 
    '-----------------------------------------------------------------------------------------------
    Friend Class CsvPart
+      Public m_sPath As String = String.Empty
       Public m_sName As String = String.Empty
       Public m_sOrd As String = String.Empty
       Public m_sDist As String = String.Empty
@@ -19,8 +20,20 @@ Friend Module CSVFile
       Public m_dDimX As Double = 0
       Public m_dDimY As Double = 0
       Public m_dTh As Double = 0
+      Public m_dAng1 As Double = 0
+      Public m_dHeel1 As Double = 0
+      Public m_dAng2 As Double = 0
+      Public m_dHeel2 As Double = 0
+      Public m_dAng3 As Double = 0
+      Public m_dHeel3 As Double = 0
+      Public m_dAng4 As Double = 0
+      Public m_dHeel4 As Double = 0
       Public m_nOriInd As Integer = 0
       Public m_nId As Integer = GDB_ID.NULL
+      ' definsco il riferimento al gruppo
+      Public m_sRefGuid As String = System.Guid.NewGuid.ToString
+      ' definisco il colore del gruppo che sto inserendo
+      Public m_cColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
    End Class
 
    '-----------------------------------------------------------------------------------------------
@@ -51,6 +64,7 @@ Friend Module CSVFile
       For i As Integer = 1 To nNbr
          Dim OnePart As New CsvPart
          Dim sN As String = i.ToString()
+         OnePart.m_sPath = sFile
          EgtLuaGetGlobStringVar("CSV.NAME" & sN, OnePart.m_sName)
          OnePart.m_bActive = True
          EgtLuaGetGlobStringVar("CSV.ORD" & sN, OnePart.m_sOrd)
@@ -62,7 +76,18 @@ Friend Module CSVFile
          EgtLuaGetGlobNumVar("CSV.DIMX" & sN, OnePart.m_dDimX)
          EgtLuaGetGlobNumVar("CSV.DIMY" & sN, OnePart.m_dDimY)
          EgtLuaGetGlobNumVar("CSV.TH" & sN, OnePart.m_dTh)
+         EgtLuaGetGlobNumVar("CSV.A1_" & sN, OnePart.m_dAng1)
+         EgtLuaGetGlobNumVar("CSV.H1_" & sN, OnePart.m_dHeel1)
+         EgtLuaGetGlobNumVar("CSV.A2_" & sN, OnePart.m_dAng2)
+         EgtLuaGetGlobNumVar("CSV.H2_" & sN, OnePart.m_dHeel2)
+         EgtLuaGetGlobNumVar("CSV.A3_" & sN, OnePart.m_dAng3)
+         EgtLuaGetGlobNumVar("CSV.H3_" & sN, OnePart.m_dHeel3)
+         EgtLuaGetGlobNumVar("CSV.A4_" & sN, OnePart.m_dAng4)
+         EgtLuaGetGlobNumVar("CSV.H4_" & sN, OnePart.m_dHeel4)
          OnePart.m_nOriInd = i
+         If OnePart.m_nCount > 1 Then
+            OnePart.m_sRefGuid = System.Guid.NewGuid.ToString
+         End If
          ' inserisco in lista
          CsvPartList.Add(OnePart)
       Next
@@ -123,7 +148,9 @@ Friend Module CSVFile
             Else
                Dim sItems() As String = sLine.Split("=".ToCharArray)
                If sItems.Count() >= 2 Then
-                  If sItems(0) = "Nam" Then
+                  If sItems(0) = "Path" Then
+                     OnePart.m_sPath = sItems(1)
+                  ElseIf sItems(0) = "Nam" Then
                      OnePart.m_sName = sItems(1)
                   ElseIf sItems(0) = "Ord" Then
                      OnePart.m_sOrd = sItems(1)
@@ -147,8 +174,26 @@ Friend Module CSVFile
                      StringToDouble(sItems(1), OnePart.m_dDimY)
                   ElseIf sItems(0) = "Th" Then
                      StringToDouble(sItems(1), OnePart.m_dTh)
+                  ElseIf sItems(0) = "A1" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng1)
+                  ElseIf sItems(0) = "H1" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel1)
+                  ElseIf sItems(0) = "A2" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng2)
+                  ElseIf sItems(0) = "H2" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel2)
+                  ElseIf sItems(0) = "A3" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng3)
+                  ElseIf sItems(0) = "H3" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel3)
+                  ElseIf sItems(0) = "A4" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng4)
+                  ElseIf sItems(0) = "H4" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel4)
                   ElseIf sItems(0) = "OIn" Then
                      StringToInt(sItems(1), OnePart.m_nOriInd)
+                  ElseIf sItems(0) = "Guid" Then
+                     OnePart.m_sRefGuid = sItems(1).Trim
                   End If
                End If
             End If
@@ -176,6 +221,7 @@ Friend Module CSVFile
          For i As Integer = 1 To CsvPartList.Count()
             Dim CurrPart As CsvPart = CsvPartList(i - 1)
             Writer.WriteLine("[P" & i.ToString() & "]")
+            Writer.WriteLine("Path=" & CurrPart.m_sPath)
             Writer.WriteLine("Nam=" & CurrPart.m_sName)
             Writer.WriteLine("Ord=" & CurrPart.m_sOrd)
             Writer.WriteLine("Dist=" & CurrPart.m_sDist)
@@ -188,20 +234,53 @@ Friend Module CSVFile
             Writer.WriteLine("DX=" & DoubleToString(CurrPart.m_dDimX, 4))
             Writer.WriteLine("DY=" & DoubleToString(CurrPart.m_dDimY, 4))
             Writer.WriteLine("Th=" & DoubleToString(CurrPart.m_dTh, 4))
+            Writer.WriteLine("A1=" & DoubleToString(CurrPart.m_dAng1, 4))
+            Writer.WriteLine("H1=" & DoubleToString(CurrPart.m_dHeel1, 4))
+            Writer.WriteLine("A2=" & DoubleToString(CurrPart.m_dAng2, 4))
+            Writer.WriteLine("H2=" & DoubleToString(CurrPart.m_dHeel2, 4))
+            Writer.WriteLine("A3=" & DoubleToString(CurrPart.m_dAng3, 4))
+            Writer.WriteLine("H3=" & DoubleToString(CurrPart.m_dHeel3, 4))
+            Writer.WriteLine("A4=" & DoubleToString(CurrPart.m_dAng4, 4))
+            Writer.WriteLine("H4=" & DoubleToString(CurrPart.m_dHeel4, 4))
             Writer.WriteLine("OIn=" & CurrPart.m_nOriInd.ToString())
+            Writer.WriteLine("Guid=" & CurrPart.m_sRefGuid)
          Next
          ' Terminatore
          Writer.WriteLine("[END]")
          ' Chiudo file
          Writer.Close()
          Return True
-      ' Errore
+         ' Errore
       Catch ex As Exception
          EgtOutLog("CSV List error writing " & sFile)
          Return False
       End Try
    End Function
 
+   ' dato l'elenco completo dei file salvo ogni singolo epl 
+   Friend Function WriteCsvMergePartList(CsvPartList As List(Of CsvPart)) As Boolean
+      Dim bOk As Boolean = True
+      Dim LocalPartList As New List(Of CsvPart)
+      Dim Index As Integer = 0
+      ' devo dividere la lista in tante parti quanti sono i file che lo costituiscono
+      While Index < CsvPartList.Count
+         Dim CurrFile As String = CsvPartList(Index).m_sPath
+         Dim sFile As String = Path.ChangeExtension(CurrFile, ".epl")
+         LocalPartList.Clear()
+         While CurrFile = CsvPartList(Index).m_sPath
+            LocalPartList.Add(CsvPartList(Index))
+            Index += 1
+            ' se terminata la lista
+            If Index = CsvPartList.Count Then
+               Exit While
+            End If
+         End While
+         ' salvo l'elenco corrente
+         bOk = WriteCsvPartList(sFile, CurrFile, LocalPartList) And bOk
+      End While
+      Return bOk
+   End Function
+
    Friend Function RemoveNotToNestParts(ByRef CsvPartList As List(Of CsvPart)) As Boolean
       For i As Integer = CsvPartList.Count() - 1 To 0 Step -1
          If CsvPartList(i).m_nToNest = 0 Then

CadCuts/CSVPage.xaml.vb

@@ -11,7 +11,7 @@ Public Class CSVPage
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
-   ' Flag tipologia
+   ' Flag tipologia (False -> Cvs semplificato)
    Private m_bFull As Boolean = False
    ' Flag inserimento diretto
    Private m_bDirect As Boolean = True
@@ -28,6 +28,10 @@ Public Class CSVPage
    Private m_ptRawMin As Point3d
    Private m_ptRawMax As Point3d
 
+   Dim m_bIsCounterLy As Boolean = False
+   Dim m_nCurrNubrOfParts As Integer = 0
+   Dim m_nIdToSel As Integer = GDB_ID.NULL
+
    Private Sub CSVPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno la lista dei pezzi Csv come sorgente del treeview
       PartsTreeView.ItemsSource = m_ItemsList
@@ -101,13 +105,36 @@ Public Class CSVPage
          If EgtIsPart(nPartId) Or bPartInTable Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nPartId, nStat)
-            ' Se già selezionato, lo deselezione
-            If nStat = GDB_ST.SEL Then
-               EgtDeselectObj(nPartId)
-            ' Altrimenti lo seleziono
-            Else
-               EgtSelectObj(nPartId)
+
+            ' verifico se l'lemento selezionato è il numero di pezzi
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT Then
+               Dim NameLayer As String = String.Empty
+               EgtGetName(EgtGetParent(nId), NameLayer)
+               If NameLayer = INFO_COUNTERLY Then
+                  Dim sText As String = String.Empty
+                  If EgtTextGetContent(nId, sText) Then
+                     Dim sItems() As String = sText.Split("#")
+                     If sItems.Count > 1 Then
+                        m_nCurrNubrOfParts = 0
+                        If StringToInt(sItems(1), m_nCurrNubrOfParts) And m_nCurrNubrOfParts > 0 Then
+                           m_bIsCounterLy = True
+                           m_nIdToSel = nPartId
+                        End If
+                     End If
+                  End If
+               End If
             End If
+
+            If Not m_bIsCounterLy Then
+               ' Se già selezionato, lo deselezione
+               If nStat = GDB_ST.SEL Then
+                  EgtDeselectObj(nPartId)
+                  ' Altrimenti lo seleziono
+               Else
+                  EgtSelectObj(nPartId)
+               End If
+            End If
+
             Exit While
          End If
          nId = EgtGetNextObjInSelWin()
@@ -115,6 +142,28 @@ Public Class CSVPage
       EgtDraw()
    End Sub
 
+   Private Sub OnMyMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseUpScene
+      If m_bIsCounterLy Then
+         ' apro una finestra di dialogo per chiedere se inserire tutti i pezzi della famiglia
+         Dim SelectWD As New SelectPartFromFamilyWD(m_MainWindow, m_nCurrNubrOfParts)
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(m_nIdToSel, INFO_REFGROUP, sRefGroup)
+         ' deseleziono il pezzo corrente
+         m_MainWindow.m_CadCutPageUC.m_NestPage.DeselectPartInFaimily(sRefGroup)
+         Select Case SelectWD.NumberOfSelection
+            Case 0    ' Annulla
+               ' continuo senza eseguire niente
+            Case Else
+               ' seleziono il numero di pezzi indicati
+               m_MainWindow.m_CadCutPageUC.m_NestPage.SelectPartInFaimily(sRefGroup, SelectWD.NumberOfSelection)
+         End Select
+         m_bIsCounterLy = False
+         ' disassegno il riferimento all'oggetto appena creato
+         SelectWD = Nothing
+         EgtDraw()
+      End If
+   End Sub
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(Me)
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC.m_NestPage)
@@ -133,15 +182,48 @@ Public Class CSVPage
       WritePrivateProfileString(S_CSV, K_CSVLASTFILE, "", m_MainWindow.GetIniFile())
    End Sub
 
+   Private Function CreateListOfDeniedFiles() As List(Of String)
+      Dim LocalList As New List(Of String)
+      LocalList.Add("MERGE")
+      Dim Index1 As Integer = 0
+      Dim Index2 As Integer = 0
+      For Index1 = 0 To m_CsvPartList.Count - 1
+         Dim sFileName As String = m_CsvPartList(Index1).m_sPath
+         sFileName = Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim()
+         Dim bNewFile As Boolean = True
+         For Index2 = 0 To LocalList.Count - 1
+            If sFileName = LocalList(Index2) Then
+               bNewFile = False
+               Exit For
+            End If
+         Next
+         If bNewFile Then
+            LocalList.Add(Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim)
+         End If
+      Next
+      Return LocalList
+   End Function
+
    Private Sub OpenBtn_Click(sender As Object, e As RoutedEventArgs) Handles OpenBtn.Click
-      ' Salvo lista dei pezzi attuale
-      SaveCsvPartList()
+      '' Salvo lista dei pezzi attuale
+      'SaveCsvPartList()
       ' Leggo direttorio corrente dei file CSV
       Dim sCurrDir As String = ""
       GetPrivateProfileString(S_CSV, K_CSVCURRDIR, "C:\", sCurrDir, m_MainWindow.GetIniFile())
       ' Apro dialogo scelta file
-      Dim OpenFileWnd As New OpenFileWD(m_MainWindow, sCurrDir, ".CSV", ".EPL")
+      Dim OpenFileWnd As OpenFileWD
+      Dim sDeniedFiles As List(Of String) = CreateListOfDeniedFiles()
+      ' imposto il filtro
+      If m_bFull Then
+         OpenFileWnd = New OpenFileWD(m_MainWindow, sCurrDir, ".CSV", ".EPL", sDeniedFiles)
+      Else
+         OpenFileWnd = New OpenFileWD(m_MainWindow, sCurrDir, ".CSV")
+      End If
       If Not OpenFileWnd.ShowDialog() Then Return
+      ' verifico che il file inserito non appartenga al Merge attuale
+
+      ' Salvo lista dei pezzi attuale
+      SaveCsvPartList()
       ' Salvo direttorio corrente
       WritePrivateProfileString(S_CSV, K_CSVCURRDIR, OpenFileWnd.GetFileDir(), m_MainWindow.GetIniFile())
       ' Apertura file
@@ -173,17 +255,28 @@ Public Class CSVPage
       ' Pulisco path e lista dei pezzi Csv
       m_sFilePath = String.Empty
       m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
+
+      ' mantengo la lista attuale dei pezzi
+      'm_CsvPartList.Clear()
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
       ' Eseguo la lettura del file Csv
-      If Not ReadCsvFile(sCsvPath, m_bFull, m_sCsvPath, m_CsvPartList) Then
+      If Not ReadCsvFile(sCsvPath, m_bFull, m_sCsvPath, LocalPartList) Then
          m_CurrProjPage.SetErrorMessage(EgtMsg(91206))    'Errore nella lettura del file CSV
          Return False
       End If
+
+      ' Creo un nuovo file che ospitarà il merge de
+      Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+      m_sCsvPath = sNewMergeFile
       m_sFilePath = m_sCsvPath
+
       ' Elimino pezzi nulli
-      RemoveWrongParts(m_CsvPartList)
+      RemoveWrongParts(LocalPartList)
       ' Aggiorno
       If m_bFull Then
+         MySaveCsvPartList(LocalPartList)
          ' Salvo come epl
          SaveCsvPartList()
          ' Rinomino file originale
@@ -196,9 +289,40 @@ Public Class CSVPage
          ' eseguo rinomina
          My.Computer.FileSystem.RenameFile(sCsvPath, sBakName)
       End If
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
       Return True
    End Function
 
+   Private Sub LoadCsvPartList(sFile As String)
+      ' Se Csv semplificato non va letta
+      If Not m_bFull Then Return
+      ' Pulisco path e lista dei pezzi Csv
+      m_sCsvPath = String.Empty
+
+      ' mantengo la lista attuale dei pezzi
+      'm_CsvPartList.Clear()
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
+
+      ' Lettura del file
+      If ReadCsvPartList(sFile, m_sCsvPath, LocalPartList) Then
+         ' Creo un nuovo file che ospitarà il merge de
+         Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+         m_sCsvPath = sNewMergeFile
+         m_sFilePath = m_sCsvPath
+      End If
+      ' Elimino pezzi nulli
+      RemoveWrongParts(LocalPartList)
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
+   End Sub
+
    Private Sub ShowTreeView()
       ' Path del file Csv
       Dim TempPath As New Text.StringBuilder(260)
@@ -208,6 +332,7 @@ Public Class CSVPage
       m_ItemsList.Clear()
       Dim sCurrMat As String = String.Empty
       Dim dCurrTh As Double = 0
+      Dim sCurrPath As String = String.Empty
       Dim nCatToNest As Integer = 0
       Dim nCatCount As Integer = 0
       Dim PartCathegory As New PartCathegoryItem("", 0)
@@ -218,19 +343,28 @@ Public Class CSVPage
          If i = 1 Then
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
          ElseIf String.Compare(sCurrMat, CurrPart.m_sMaterial, True) <> 0 Or
+                String.Compare(sCurrPath, CurrPart.m_sPath, True) <> 0 Or
                 Math.Abs(dCurrTh - CurrPart.m_dTh) > 10 * EPS_SMALL Then
             If m_bFull Then
                PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                                     " - " & LenToString(dCurrTh, 2) &
                                     " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
             Else
                PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
             End If
             PartCathegory.IsExpanded = True
             m_ItemsList.Add(PartCathegory)
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
             PartCathegory = New PartCathegoryItem("", 0)
             nCatToNest = 0
             nCatCount = 0
@@ -248,8 +382,14 @@ Public Class CSVPage
          PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                               " - " & LenToString(dCurrTh, 2) &
                               " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
       Else
          PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
       End If
       PartCathegory.IsExpanded = True
       m_ItemsList.Add(PartCathegory)
@@ -259,6 +399,7 @@ Public Class CSVPage
       For Each CatItem As PartCathegoryItem In m_ItemsList
          Dim sCurrMat As String = String.Empty
          Dim dCurrTh As Double = 0
+         Dim sCurrPath As String = String.Empty
          Dim nCatToNest As Integer = 0
          Dim nCatCount As Integer = 0
          For Each PrtItem As PartCustomItem In CatItem.Items
@@ -268,6 +409,7 @@ Public Class CSVPage
             PrtItem.sText1 = sCount
             sCurrMat = PartData.m_sMaterial
             dCurrTh = PartData.m_dTh
+            sCurrPath = PartData.m_sPath
             nCatToNest += PartData.m_nToNest
             nCatCount += PartData.m_nCount
          Next
@@ -275,8 +417,14 @@ Public Class CSVPage
             CatItem.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                            " - " & LenToString(dCurrTh, 2) &
                            " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
          Else
             CatItem.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
          End If
       Next
    End Sub
@@ -345,6 +493,7 @@ Public Class CSVPage
    End Function
 
    Private Sub InsertBtn_Click(sender As Object, e As RoutedEventArgs) Handles InsertBtn.Click
+      'm_CurrProjPage.ClearMessage()
       ' Recupero lo spessore della lastra corrente
       Dim dRawHeight As Double = GetRawHeight()
       If dRawHeight < EPS_SMALL Then Return
@@ -355,20 +504,17 @@ Public Class CSVPage
       End If
       ' Recupero la tolleranza sullo spessore
       Dim dToler As Double = GetPrivateProfileDouble(S_CSV, K_THICKTOLERANCE, 100 * EPS_SMALL, m_MainWindow.GetIniFile())
-      dToler = Math.Max( dToler, 100 * EPS_SMALL)
+      dToler = Math.Max(dToler, 100 * EPS_SMALL)
       ' Creo la lista dei pezzi inseribili nella lastra corrente
       Dim InsPartList As New List(Of CsvPart)
       For i As Integer = 1 To m_CsvPartList.Count()
          Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
          If CurrPart.m_bActive And
-            (Math.Abs(CurrPart.m_dTh - dRawHeight) < dToler Or
-              CurrPart.m_dTh < EPS_SMALL) And
-            (String.IsNullOrWhiteSpace(CurrPart.m_sMaterial) Or
-             String.IsNullOrWhiteSpace(sCurrMat) Or
-             CurrPart.m_sMaterial = "***" Or
-             sCurrMat = "***" Or
-             String.Compare(CurrPart.m_sMaterial, sCurrMat, True) = 0) Then
+            (Math.Abs(CurrPart.m_dTh - dRawHeight) < dToler Or CurrPart.m_dTh < EPS_SMALL) And
+            (String.IsNullOrWhiteSpace(CurrPart.m_sMaterial) Or String.IsNullOrWhiteSpace(sCurrMat) Or CurrPart.m_sMaterial = "***" Or sCurrMat = "***" Or String.Compare(CurrPart.m_sMaterial, sCurrMat, True) = 0) Then
             InsPartList.Add(CurrPart)
+            'ElseIf CurrPart.m_bActive Then
+            '   m_CurrProjPage.SetWarningMessage("Grezzo non compatibile")
          End If
       Next
       ' Lancio l'inserimento dei pezzi
@@ -424,10 +570,14 @@ Public Class CSVPage
          ' Definizione variabili
          Dim dDimX = CurrPart.m_dDimX
          Dim dDimY = CurrPart.m_dDimY
+         Dim dAng = New Double() {CurrPart.m_dAng1,CurrPart.m_dAng2,CurrPart.m_dAng3,CurrPart.m_dAng4}
+         Dim dHeel = New Double() {CurrPart.m_dHeel1,CurrPart.m_dHeel2,CurrPart.m_dHeel3,CurrPart.m_dHeel4}
          If bMaxDimOnX And dDimY > dDimX Then
             Dim dTemp As Double = dDimX
             dDimX = dDimY
             dDimY = dTemp
+            dAng = New Double() {CurrPart.m_dAng2,CurrPart.m_dAng3,CurrPart.m_dAng4,CurrPart.m_dAng1}
+            dHeel = New Double() {CurrPart.m_dHeel2,CurrPart.m_dHeel3,CurrPart.m_dHeel4,CurrPart.m_dHeel1}
          End If
          EgtLuaSetGlobNumVar("CMP.V1", dDimX)
          EgtLuaSetGlobNumVar("CMP.V2", dDimY)
@@ -439,7 +589,7 @@ Public Class CSVPage
          If nId = GDB_ID.NULL Then Continue For
          CurrPart.m_nId = nId
          ' Muovo la regione in Z per evitare problemi in visualizzazione
-         Dim nRegId = EgtGetFirstNameInGroup(nId, NAME_REGION)
+         Dim nRegId As Integer = EgtGetFirstNameInGroup(nId, NAME_REGION)
          EgtMove(nRegId, New Vector3d(0, 0, DELTAZ_REG), GDB_RT.GLOB)
          ' Eventuale testo per indicare il sopra
          If Not bMaxDimOnX Then
@@ -447,11 +597,36 @@ Public Class CSVPage
             Dim nText As Integer = EgtCreateTextAdv(nRegId, New Point3d(dDimX / 2, dDimY - 0.6 * dH, 0), 0, "*TOP*", "", 500, False, dH, 1, 0, INS_POS.MC)
             EgtSetColor(nText, New Color3d( 0, 0, 0))
          End If
+         ' Inserisco eventuali angoli di fianco
+         Dim bSideAngs As Boolean = False
+         Dim nOutLoopId As Integer = EgtGetFirstNameInGroup( nId, NAME_OUTLOOP)
+         For nSide As Integer = 1 To 4
+            Dim dSideAng As Double = dAng( nSide - 1)
+            Dim dSideHeel As Double = dHeel( nSide - 1)
+            If Math.Abs( dSideAng) > EPS_ANG_SMALL Then
+               Dim nEntId As Integer = EgtGetFirstNameInGroup( nOutLoopId, "A" & nSide.ToString())
+               If nEntId <> GDB_ID.NULL Then
+                  bSideAngs = True
+                  ' Assegno valori
+                  EgtSetInfo(nEntId, INFO_SIDE_ANGLE, dSideAng)
+                  EgtSetInfo(nEntId, INFO_ORIG_SIDE_ANGLE, dSideAng)
+                  EgtSetInfo(nEntId, INFO_HEEL, dSideHeel)
+               End If
+            End If
+         Next
+         ' Creo layer per testi nesting
+         If bSideAngs Then
+            Dim TextLayId As Integer = EgtCreateGroup(nId)
+            EgtSetName(TextLayId, SIDE_ANGLE_LAYER)
+            EgtSetColor(TextLayId, New Color3d(0, 0, 128))
+            ' Opero su geometria esterna pezzo
+            SideAngle.WriteSideAngleOnLoop(nOutLoopId, TextLayId)
+         End If
          ' Aggiusto per lavorazioni
          EgtAdjustFlatPart(nId)
          ' Se Csv completo, aggiungo info su CSV di origine
          If m_bFull Then
-            EgtSetInfo(nId, INFO_CSV_PATH, m_sCsvPath)
+            EgtSetInfo(nId, INFO_CSV_PATH, CurrPart.m_sPath)
             EgtSetInfo(nId, INFO_CSV_PART, CurrPart.m_sName)
             EgtSetInfo(nId, INFO_CSV_ORD, CurrPart.m_sOrd)
             EgtSetInfo(nId, INFO_CSV_DIST, CurrPart.m_sDist)
@@ -461,14 +636,36 @@ Public Class CSVPage
          Utility.SetTextColor( nRegId)
          ' Lo sposto nel gruppo speciale
          EgtRelocate(nId, nIpGrp)
+
+
+         ' assegno l'identificatico del pezzo, se esiste
+         If Not String.IsNullOrEmpty(CurrPart.m_sRefGuid) Then
+            ' GuidCode dovrebbe contenere 36 caratteri, il precode 5: tot = 41
+            If CurrPart.m_sRefGuid.Count <= 36 Then
+               Dim sPreGuid As String = CreatePreGuidCode(CurrPart.m_nId)
+               CurrPart.m_sRefGuid = sPreGuid & CurrPart.m_sRefGuid
+            End If
+            EgtSetInfo(CurrPart.m_nId, INFO_REFGROUP, CurrPart.m_sRefGuid)
+         End If
+         Dim nRegLayId As Integer = EgtGetFirstNameInGroup(CurrPart.m_nId, NAME_REGION)
+         ' Imposto il colore del pezzo inserito nel progetto
+         EgtSetColor(nRegLayId, CurrPart.m_cColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, CurrPart.m_cColor)
+            EntId = EgtGetNext(EntId)
+         End While
+
       Next
       EgtLuaResetGlobVar("CMP")
       EgtLuaResetGlobVar("CMP_Draw")
+
       ' Provo ad inserire i pezzi
       Dim dNewArea As Double = 0
       For i As Integer = 1 To InsPartList.Count()
          Dim CurrPart As CsvPart = InsPartList(i - 1)
          While CurrPart.m_nToNest > 0
+
             If m_bDirect Then
                If NestOnePart(CurrPart.m_nId) Then
                   dNewArea += GeomCalc.GetPartArea(CurrPart.m_nId)
@@ -490,6 +687,7 @@ Public Class CSVPage
       m_CurrProjPage.UpdateTotalArea( dNewArea)
       m_CurrProjPage.UpdateToProduceArea()
       m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
+
       Return True
    End Function
 
@@ -566,11 +764,11 @@ Public Class CSVPage
       Dim sName As String = String.Empty
       EgtGetInfo(nId, INFO_CSV_PART, sName)
       ' Verifico che il pezzo appartenga a questo Csv
-      If String.Compare(sCsvPath, m_sCsvPath, True) = 0 Then
+      If SearchCurrCSV(sCsvPath) Then
          ' Cerco il pezzo nella lista dei pezzi
          For i As Integer = 1 To m_CsvPartList.Count()
             Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
-            If String.Compare(sName, CurrPart.m_sName, True) = 0 Then
+            If String.Compare(sName, CurrPart.m_sName, True) = 0 And String.Compare(sCsvPath, CurrPart.m_sPath, True) = 0 Then
                ' Se nel grezzo
                If EgtGetParent(nId) = m_nRawId Then
                   ' Rimuovo le lavorazioni
@@ -578,19 +776,38 @@ Public Class CSVPage
                   ' Rimuovo dal grezzo
                   EgtRemovePartFromRawPart(nId)
                End If
+               ' recupero il Guid del pezzo corrente (potrebbe essere stato modificato a causa di rotazioni quando il pezzo è passato in parcheggio)
+               Dim sCurrRefGuid As String = String.Empty
+               EgtGetInfo(nId, INFO_REFGROUP, sCurrRefGuid)
                ' Cancello il pezzo
                EgtErase(nId)
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio (se sRefGroup<>"")
+               m_MainWindow.m_CadCutPageUC.m_NestPage.CountPartInFamily(sCurrRefGuid)
                ' Aggiorno il contatore
                CurrPart.m_nToNest += 1
+               ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+               m_MainWindow.m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
                ' Esco
                Return True
             End If
          Next
       End If
+      ' creo la lista delle famiglie di pezzi presenti in parcheggio
+      m_MainWindow.m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
       ' Pezzo non appartenente al Csv corrente
       Return False
    End Function
 
+   Private Function SearchCurrCSV(ByVal sCSVFile As String) As Boolean
+      For i As Integer = 1 To m_CsvPartList.Count()
+         Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
+         If String.Compare(sCSVFile, CurrPart.m_sPath, True) = 0 Then
+            Return True
+         End If
+      Next
+      Return False
+   End Function
+
    Friend Sub SaveCsvPartList()
       ' Se Csv semplificato non va salvata
       If Not m_bFull Then Return
@@ -601,24 +818,33 @@ Public Class CSVPage
       End If
       ' Path del file
       Dim sFile As String = Path.ChangeExtension(m_sFilePath, ".epl")
-      ' Scrittura del file
-      If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
-         ' Registro in ini path
-         WritePrivateProfileString(S_CSV, K_CSVLASTFILE, sFile, m_MainWindow.GetIniFile())
+      ' Scrittura dei file
+      If WriteCsvMergePartList(m_CsvPartList) Then
+         ' Scrittura dei file Merge
+         If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
+            WritePrivateProfileString(S_CSV, K_CSVLASTFILE, sFile, m_MainWindow.GetIniFile())
+         End If
       End If
    End Sub
 
-   Private Sub LoadCsvPartList(sFile As String)
-      ' Se Csv semplificato non va letta
+   ' salvo il sottoelenco dei pezzi
+   Friend Sub MySaveCsvPartList(ByVal CurrPartList As List(Of CsvPart))
+      ' Se Csv semplificato non va salvata
       If Not m_bFull Then Return
-      ' Pulisco path e lista dei pezzi Csv
-      m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
-      ' Lettura del file
-      ReadCsvPartList(sFile, m_sCsvPath, m_CsvPartList)
-      m_sFilePath = sFile
-      ' Elimino pezzi nulli
-      RemoveWrongParts(m_CsvPartList)
+      Dim sCurrPath As String = String.Empty
+      ' recupero dalla lista il nome del file corrente
+      For Each Item As CsvPart In CurrPartList
+         sCurrPath = Item.m_sPath
+      Next
+      ' se non trov il nome del file assocciato all'elenco di pezzi esco
+      If String.IsNullOrEmpty(sCurrPath) Then
+         EgtOutLog("CSV Curr list missing")
+         Return
+      End If
+      ' Path del file
+      Dim sFile As String = Path.ChangeExtension(sCurrPath, ".epl")
+      ' Scrittura del file
+      WriteCsvPartList(sFile, sCurrPath, CurrPartList)
    End Sub
 
    Friend Sub UpdateCsvPartList()

CadCuts/CadCutPageUC.xaml.vb

@@ -107,6 +107,9 @@ Public Class CadCutPageUC
 
    Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Se macchina fotografica collegata, faccio una foto
@@ -140,6 +143,9 @@ Public Class CadCutPageUC
 
    Private Sub RawPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RawPartBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_RawPartPage)
@@ -165,6 +171,9 @@ Public Class CadCutPageUC
 
    Private Sub DrawBtn_Click(sender As Object, e As RoutedEventArgs) Handles DrawBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
@@ -172,6 +181,9 @@ Public Class CadCutPageUC
 
    Private Sub ImportBtn_Click(sender As Object, e As RoutedEventArgs) Handles ImportBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_ImportPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Import
@@ -193,10 +205,13 @@ Public Class CadCutPageUC
    End Sub
 
    Private Sub SplitBtn_Click(sender As Object, e As RoutedEventArgs) Handles SplitBtn.Click
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtDeselectObj(m_NestPage.m_CurrSelectedCurv)
       m_ProjectMgr.TestBtn.IsChecked = False
-      m_CurrProjPage.m_bSelectCurv = False
+      m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
       Select Case m_CadCutMode
          Case CadCutModes.Nest, CadCutModes.FastGrid
             ' Passo alla pagina Split
@@ -206,9 +221,9 @@ Public Class CadCutPageUC
                SplitImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/Nest.png", UriKind.Relative))
             End If
             If m_CadCutMode = CadCutModes.Nest Then
-                  CadCutPageGrid.Children.Remove(m_NestPage)
-               Else
-                  CadCutPageGrid.Children.Remove(m_FastGridSlabManager)
+               CadCutPageGrid.Children.Remove(m_NestPage)
+            Else
+               CadCutPageGrid.Children.Remove(m_FastGridSlabManager)
             End If
             CadCutPageGrid.Children.Add(m_SplitPage)
             m_CadCutMode = CadCutModes.Split

CadCuts/EditValueWD.xaml

@@ -27,6 +27,14 @@
          <EgtWPFLib:EgtTextBox Name="ValueTxBx" Grid.Column="1" Grid.Row="1"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
+         <ComboBox Name="ValueCmBx" Grid.Column="1" Grid.Row="1">
+            <ComboBox.ItemTemplate>
+               <DataTemplate>
+                  <TextBlock Text="{Binding}" FontSize="20" />
+               </DataTemplate>
+            </ComboBox.ItemTemplate>
+         </ComboBox>
+
          <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="0.5*"/>

CadCuts/EditValueWD.xaml.vb

@@ -1,6 +1,7 @@
 Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib
+Imports System.Collections.ObjectModel
 
 Public Class EditValueWD
 
@@ -8,29 +9,77 @@ Public Class EditValueWD
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private m_sMsg As String = "Value"
    Private m_sValue As String = ""
+   Private m_sList As ObservableCollection(Of String)
+   Private m_IsText As Boolean = True
 
+   ' avvia la visualizzazione della textbox
    Sub New(Owner As Window, Optional sMsg As String = "")
       Me.Owner = Owner
       m_sMsg = sMsg
+      m_IsText = True
       InitializeComponent()
    End Sub
 
-   Friend Function SetVal( dVal As Double) As Boolean
-      m_sValue = DoubleToString( dVal, 3)
+   Friend Function SetVal(dVal As Double, Optional ByVal bLen As Boolean = False) As Boolean
+      If bLen Then
+         m_sValue = LenToString(dVal, 3)
+      Else
+         m_sValue = DoubleToString(dVal, 3)
+      End If
       ValueTxBx.Text = m_sValue
-      Return true
+      Return True
    End Function
 
-   Friend Function GetVal() As Double
+   ' avvia la visualizzazione della combobox
+   Sub New(Owner As Window, sList As ObservableCollection(Of String), Optional sMsg As String = "")
+      Me.Owner = Owner
+      m_sMsg = sMsg
+      m_IsText = False
+      InitializeComponent()
+      m_sList = sList
+      SetComboBox(m_sList)
+   End Sub
+
+   Friend Function GetVal(Optional ByVal bLen As Boolean = False) As Double
       Dim dVal As Double = 0
-      StringToDouble( m_sValue, dVal)
+      If bLen Then
+         StringToLen(m_sValue, dVal)
+      Else
+         StringToDouble(m_sValue, dVal)
+      End If
       Return dVal
    End Function
 
+   Friend Function SetComboBox(sList As ObservableCollection(Of String)) As Boolean
+      ValueCmBx.ItemsSource = sList
+      Return True
+   End Function
+
+   Friend Function SetItemComboBox(sItem As String) As Boolean
+      For Each MyItem As String In ValueCmBx.ItemsSource
+         If MyItem = sItem Then
+            ValueCmBx.SelectedItem = MyItem
+         End If
+      Next
+      Return True
+   End Function
+
+   Friend Function GetItemComboBox() As String
+      Dim sVal As String = ValueCmBx.SelectedItem
+      Return sVal
+   End Function
+
    Private Sub EditValueWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
       ValueTxbl.Text = m_sMsg
+      If m_IsText Then
+         ValueCmBx.Visibility = Visibility.Collapsed
+         ValueTxBx.Visibility = Visibility.Visible
+      Else
+         ValueCmBx.Visibility = Visibility.Visible
+         ValueTxBx.Visibility = Visibility.Collapsed
+      End If
    End Sub
 
    Private Sub EditValueWD_Rendered(sender As Object, e As EventArgs) Handles Me.ContentRendered

CadCuts/MoveRawPartPage.xaml

@@ -7,158 +7,167 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
 
-   <!-- Definizione della SplitPage -->
-   <Grid Name="SplitPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
+    <!-- Definizione della SplitPage -->
+    <Grid Name="SplitPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-      <!--Upper button grid-->
-      <Grid Grid.Column="1">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="4*"/>
-            <ColumnDefinition Width="8*"/>
-         </Grid.ColumnDefinitions>
-
-         <!--Griglia per oscurare i bottoni della pagina sottostante-->
-         <Grid Background="{DynamicResource OmagCut_Gray}">
+        <!--Upper button grid-->
+        <Grid Grid.Column="1">
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="8*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            <!--Griglia per oscurare i bottoni della pagina sottostante-->
+            <Grid Background="{DynamicResource OmagCut_Gray}">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
+                        <Image.RenderTransform>
+                            <TransformGroup>
+                                <RotateTransform Angle="180"/>
+                            </TransformGroup>
+                        </Image.RenderTransform>
+                    </Image>
+                </Button>
+                <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+            </Grid>
+        </Grid>
+
+        <!--Left Button Grid-->
+        <Grid Grid.RowSpan="3">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <Button Name="TopLBtn" Grid.Column="0" Grid.Row="1"
+         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+                <Image Source="{DynamicResource TopLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
-                  <Image.RenderTransform>
-                     <TransformGroup>
-                        <RotateTransform Angle="180"/>
-                     </TransformGroup>
-                  </Image.RenderTransform>
-               </Image>
+            <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
+         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+                <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-         </Grid>
-      </Grid>
-
-      <!--Left Button Grid-->
-      <Grid Grid.RowSpan="3">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="2*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
-
-         <Button Name="TopLBtn" Grid.Column="0" Grid.Row="1"
+            <Button Name="TopRBtn" Grid.Column="2" Grid.Row="1"
          Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource TopLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="TopRBtn" Grid.Column="2" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource TopRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
+                <Image Source="{DynamicResource TopRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
          Style="{DynamicResource OmagCut_LeftGrayGradientYellowButton}">
-            <Image Source="{DynamicResource LeftArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="1" Grid.Row="2" Width="50"
+                <Image Source="{DynamicResource LeftArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="1" Grid.Row="2" Width="50"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-         <Button Name="ResetBtn" Grid.Column="1" Grid.Row="2"
+            <Button Name="ResetBtn" Grid.Column="1" Grid.Row="2"
             Style="{DynamicResource OmagCut_YellowTextButton}">
-         </Button>
-         <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
+            </Button>
+            <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
          Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RightArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="BottomLBtn" Grid.Column="0" Grid.Row="3"
+                <Image Source="{DynamicResource RightArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="BottomLBtn" Grid.Column="0" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource BottomLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
+                <Image Source="{DynamicResource BottomLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="BottomRBtn" Grid.Column="2" Grid.Row="3"
+                <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="BottomRBtn" Grid.Column="2" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource BottomRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
+                <Image Source="{DynamicResource BottomRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
-         <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
+            <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
             Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                 <Image Source="{DynamicResource CounterClockwiseRotateImg}" Width="64" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
-         </Button>
+            </Button>
 
-         <Grid Name="RotationAngle" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center" VerticalAlignment="Center">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="Auto"/>
-               <ColumnDefinition Width="Auto"/>
-            </Grid.ColumnDefinitions>
-            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50"
+            <Grid Name="RotationAngle" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center" VerticalAlignment="Center">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="Auto"/>
+                    <ColumnDefinition Width="Auto"/>
+                </Grid.ColumnDefinitions>
+                <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
+                <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
             Text="°"/>
-         </Grid>
+            </Grid>
 
-         <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
+            <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
             Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
+                <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
-         </Button>
+            </Button>
 
+            <!--Gestione sfridi-->
+            <Button Name="RemovePartBtn" Grid.ColumnSpan="2" Grid.Row="6"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-         <Button Name="RemovePartBtn" Grid.ColumnSpan="3" Grid.Row="6"
-         Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            <Button Name="ScrapsBtn" Grid.Column="3" Grid.Row="6"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-         <Grid Grid.Row="7" Grid.ColumnSpan="3">
+            <!--Gestione scarico pezzi-->
+            <Button Name="UnloadPartsBtn" Grid.ColumnSpan="2" Grid.Row="7"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+            <Grid Grid.Row="7" Grid.ColumnSpan="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+            </Grid>
+
+        </Grid>
+
+        <!--Lower button grid, sfondo grigio per coprire i bottoni della pagina sottostante-->
+        <Grid Grid.Column="1" Grid.Row="2" Background="{DynamicResource OmagCut_Gray}">
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="10*"/>
             </Grid.ColumnDefinitions>
+            <!-- Inserimento della pausa durante il movimento sulla tavola di scarico-->
+            <Button Name="PauseBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+        </Grid>
 
-         </Grid>
-
-      </Grid>
-
-      <!--Lower button grid, sfondo grigio per coprire i bottoni della pagina sottostante-->
-      <Grid Grid.Column="1" Grid.Row="2" Background="{DynamicResource OmagCut_Gray}">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="10*"/>
-         </Grid.ColumnDefinitions>
-
-
-      </Grid>
-
-   </Grid>
+    </Grid>
 
 </UserControl>

CadCuts/NestPageUC.xaml

@@ -8,7 +8,7 @@
    d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="NestPage_Initialized" Loaded="NestPage_Loaded" Unloaded="NestPage_Unloaded">
       
    <!-- Definizione della NestPage -->
-   <Grid Name="NestPageGrid" >
+   <Grid Name="NestPageGrid">
       <Grid.ColumnDefinitions>
          <ColumnDefinition Width="3*"/>
          <ColumnDefinition Width="12*"/>
@@ -78,7 +78,7 @@
                <ColumnDefinition Width="Auto"/>
                <ColumnDefinition Width="Auto"/>
             </Grid.ColumnDefinitions>
-            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50"
+            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
                Text="°"/>
@@ -99,18 +99,38 @@
             <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
          </Button>
-         
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
-            <Button Name="StorePartBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
-         </UniformGrid>
 
-         <Button Name="RemovePartBtn" Grid.ColumnSpan="3" Grid.Row="6"
-            Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
+            <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3" >
+                <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Inserisci-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <Button Name="StorePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Parcheggia-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <ToggleButton Name="StartCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource StartWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
+          
+            <UniformGrid Name ="UG1"  Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="3" >
+                <Button Name="RemovePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Elimina-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <ToggleButton Name="DragRettanleBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Drag_RettangleImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="SplitCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource SplitWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
 
-         <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="SelectAllBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
-            <Button Name="DeselectAllBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
+            <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
+                <Button Name="SelectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Seleziona-tuttoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <Button Name="DeselectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Deseleziona-tuttoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
          </UniformGrid>
 
       </Grid>

CadCuts/OpenFileWD.xaml.vb

@@ -9,6 +9,7 @@ Public Class OpenFileWD
    Private m_sCurrFile As String = String.Empty
    Private m_sExt As String = String.Empty
    Private m_sExt2 As String = String.Empty
+   Private n_sDeniedFiles As New List(Of String)
 
    Private m_OpenItemList As New ObservableCollection(Of IconListBoxItem)
 
@@ -27,6 +28,15 @@ Public Class OpenFileWD
       InitializeComponent()
    End Sub
 
+   Sub New(Owner As Window, sDir As String, sExt As String, sExt2 As String, DeniedFiles As List(Of String))
+      Me.Owner = Owner
+      m_sCurrDir = sDir
+      m_sExt = sExt
+      m_sExt2 = sExt2
+      n_sDeniedFiles = DeniedFiles
+      InitializeComponent()
+   End Sub
+
    Private Sub OpenFile_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Posizione finestra
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
@@ -71,13 +81,20 @@ Public Class OpenFileWD
       Dim FileI As FileInfo
       For Each FileI In vFileI
          Dim sExt As String = Path.GetExtension(FileI.Name).ToUpper()
-         If String.Compare(sExt, m_sExt, True) = 0 Or
-            String.Compare(sExt, m_sExt2, True) = 0 Then
+         Dim sFileName As String = Path.GetFileNameWithoutExtension(FileI.Name).ToUpper.Trim
+         Dim bDenied As Boolean = False
+         For Each ItemFile As String In n_sDeniedFiles
+            If ItemFile.ToUpper.Trim = sFileName Then
+               bDenied = True
+               Exit For
+            End If
+         Next
+         If (String.Compare(sExt, m_sExt, True) = 0 Or String.Compare(sExt, m_sExt2, True) = 0) And Not bDenied Then
             m_OpenItemList.Add(New IconListBoxItem(FileI.Name, 3))
          End If
       Next
-      ' riporto visualizzazione in cima alla lista (esiste sempre almeno un elemento)
-      FileListBox.ScrollIntoView(m_OpenItemList(0))
+         ' riporto visualizzazione in cima alla lista (esiste sempre almeno un elemento)
+         FileListBox.ScrollIntoView(m_OpenItemList(0))
       Return True
    End Function
 

CadCuts/SelectPartFromFamilyWD.xaml

@@ -0,0 +1,72 @@
+<Window x:Class="SelectPartFromFamilyWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+        Title="SaveNameWD" Height="200" Width="400" ShowInTaskbar="False">
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid x:Name="SaveNameGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.1*"/>
+                <RowDefinition Height="0.3*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+
+            </Grid.RowDefinitions>
+
+            <!--Messaggio: Seleziona il numero di pezzi-->
+            <TextBlock Name="TitleWDTxbl" Grid.Column="1" Grid.Row="1"
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+
+            <UniformGrid Grid.Column="1" Grid.Row="3" VerticalAlignment="Center" Columns="2">
+                <TextBlock Name="NbrOfPartsMsg"
+                           Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="NbrOfParts"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            </UniformGrid>
+
+            <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="5" Grid.RowSpan="1">
+                <Grid.ColumnDefinitions>
+
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+
+                </Grid.ColumnDefinitions>
+
+                <!--ultimo progetto-->
+                <Button Name="ConfirmSelection" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Confirm">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <!--nuovo progetto-->
+                <Button Name="SelectAllPart" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Select all" Visibility="Collapsed">
+                    <Image Source="{DynamicResource NuovoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <!--apri folder progetti-->
+                <Button Name="CancelSelection" Grid.Column="5" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Cancel">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+</Window>

CadCuts/SelectPartFromFamilyWD.xaml.vb

@@ -0,0 +1,66 @@
+Public Class SelectPartFromFamilyWD
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_NumberOfParts As Integer = 1
+   Public Property NumberOfParts As Integer
+      Get
+         Return m_NumberOfParts
+      End Get
+      Set(value As Integer)
+         m_NumberOfParts = value
+      End Set
+   End Property
+
+   Private m_NumberOfSelection As Integer = 1
+   Public Property NumberOfSelection As Integer
+      Get
+         Return m_NumberOfSelection
+      End Get
+      Set(value As Integer)
+         m_NumberOfSelection = value
+      End Set
+   End Property
+   Public Sub New(Owner As Window, NbrParts As Integer)
+      Me.Owner = Owner
+      m_NumberOfParts = NbrParts
+      InitializeComponent()
+      Me.ShowDialog()
+   End Sub
+
+   ' inizializzo la finestra
+   Private Sub SelectPartFromFamilyWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' posiziono la fistra in centro alla pagina
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+
+      TitleWDTxbl.Text = "Selection parts"
+      NbrOfPartsMsg.Text = "Number of parts"
+      NbrOfParts.Text = m_NumberOfParts.ToString
+   End Sub
+
+   ' seleziono il numero di elementi indicati
+   Private Sub ConfirmSelection_Click(sender As Object, e As RoutedEventArgs) Handles ConfirmSelection.Click
+      Dim nVal As Integer = 0
+      StringToInt(NbrOfParts.Text, nVal)
+      If nVal >= 0 Then
+         m_NumberOfSelection = nVal
+      Else
+         ' indice non valido per la selezione
+         m_NumberOfSelection = 0
+      End If
+      Me.Close()
+   End Sub
+
+   '' seleziona tutti
+   'Private Sub SelectAllPart_Click(sender As Object, e As RoutedEventArgs) Handles SelectAllPart.Click
+   '   m_NumberOfSelection = m_NumberOfParts
+   '   Me.Close()
+   'End Sub
+
+   ' Deseleziomo tutto
+   Private Sub CancelSelection_Click(sender As Object, e As RoutedEventArgs) Handles CancelSelection.Click
+      m_NumberOfSelection = 0
+      Me.Close()
+   End Sub
+
+End Class

CadCuts/SplitAuto.vb

@@ -1,10 +1,16 @@
-Imports EgtUILib
+Imports System.Windows.Forms.Integration
+Imports EgtUILib
 
 Public Module SplitAuto
 
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
 
    Private m_dLastDT As Double = 0
+   Public ReadOnly Property dLastDT As Double
+      Get
+         Return m_dLastDT
+      End Get
+   End Property
 
    '-----------------------------------------------------------------------------------------------
    Friend Class SplitMach
@@ -93,14 +99,15 @@ Public Module SplitAuto
                   Mach.m_dStartFreeLen = FREELEN_INF + 1
                   Mach.m_dEndFreeLen = FREELEN_INF + 1
                   Dim nEntId, nSub As Integer
-                  If EgtGetMachiningGeometry( 0, nEntId, nSub) Then
-                     If EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse EgtGetType( nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
-                     Mach.m_bEnableInvert = GetEnableInvert( nEntId)
-                     EgtMidVector( nEntId, GDB_ID.ROOT, Mach.m_vtDir)
+                  If EgtGetMachiningGeometry(0, nEntId, nSub) Then
+                     ' EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse
+                     If EgtGetType(nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
+                     Mach.m_bEnableInvert = GetEnableInvert(nEntId)
+                     EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
                      If Mach.m_bInvert Then Mach.m_vtDir = -Mach.m_vtDir
                      Mach.m_nEntId = nEntId
                   End If
@@ -126,7 +133,7 @@ Public Module SplitAuto
                      Mach.m_bStartAll = False
                      Mach.m_bEndAll = False
                   End If
-               ' Waterjet
+                  ' Waterjet
                ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then
                   Mach.m_nInterf = FMI_TYPE.NONE
                   ' recupero l'angolo di fianco
@@ -135,7 +142,7 @@ Public Module SplitAuto
                   Mach.m_bCanEndAll = False
                   Mach.m_bStartAll = False
                   Mach.m_bEndAll = False
-               ' Forature e fresature
+                  ' Forature e fresature
                Else
                   Mach.m_nInterf = FMI_TYPE.NONE
                   Mach.m_dSideAng = 0
@@ -150,7 +157,7 @@ Public Module SplitAuto
                Mach.m_bPause = GetPause(nOperId)
                ' inserisco in lista
                MachSplitList.Add(Mach)
-            ' altrimenti la disattivo
+               ' altrimenti la disattivo
             Else
                EgtSetOperationMode(nOperId, False)
             End If
@@ -161,6 +168,17 @@ Public Module SplitAuto
    End Function
 
    '-----------------------------------------------------------------------------------------------
+   ' calcolo il numero di tipi di lavorazioni
+   Friend Sub CountMachiningType(MachSplit As SplitMach, ByRef nCountSawing As Integer, ByRef nCountWaterjetting As Integer, ByRef nCountOtherMachining As Integer)
+      If MachSplit.m_nType = MCH_OY.SAWING Then
+         nCountSawing += 1
+      ElseIf MachSplit.m_nType = MCH_OY.WATERJETTING Then
+         nCountWaterjetting += 1
+      Else
+         nCountOtherMachining += 1
+      End If
+   End Sub
+
    Friend Sub ColorMachining(MachSplit As SplitMach, Optional bReset As Boolean = False)
       EgtDisableModified()
       ' Assegno stato
@@ -177,7 +195,7 @@ Public Module SplitAuto
 
    Private Sub ColorSingleMachining(nOperId As Integer, sLay As String, dSideAng As Double, bEnabled As Boolean, nInterf As Integer)
       ' Verifico se è un taglio da sopra o da sotto
-      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or ( sLay = NAME_INLOOP AndAlso EgtExistsInfo( nOperId, INFO_FILOTOP)))
+      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or (sLay = NAME_INLOOP AndAlso EgtExistsInfo(nOperId, INFO_FILOTOP)))
       Dim bDrip As Boolean = (sLay = NAME_DRIPCUT Or sLay = NAME_UNDERDRILL)
       ' Recupero il preview della lavorazione
       Dim nPvId As Integer = GDB_ID.NULL
@@ -202,11 +220,11 @@ Public Module SplitAuto
             Next
             EgtSetColor(nDwnCutId, COL_MCH_DISABLED)
             Dim bFreeStart As Boolean = (nInterf And FMI_TYPE.LI) <> FMI_TYPE.LI
-            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
-            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
             Dim bFreeEnd As Boolean = (nInterf And FMI_TYPE.LO) <> FMI_TYPE.LO
-            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
-            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
          Else
             Dim colCut As Color3d
             If bOnMach Then
@@ -325,6 +343,7 @@ Public Module SplitAuto
       Dim ptOri As Point3d
       EgtGetTableRef(1, ptOri)
       Dim vtOri As New Vector3d(ptOri.x, ptOri.y, ptOri.z)
+      ' ---------------------------------- GREZZI ----------------------------------
       ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
       Dim nRawId As Integer = EgtGetFirstRawPart()
       While nRawId <> GDB_ID.NULL
@@ -347,6 +366,13 @@ Public Module SplitAuto
                   vNewRaws.Add(nNewRawId)
                   nNewRawId = EgtGetNextRawPart(nNewRawId)
                End While
+            Else
+               ' verifico che nella fase precedente è stato definito come sfrido, allora lo riassegno
+               Dim nVal As Integer = 0
+               EgtGetInfo(nRawId, K_ISNEWSCRAPS, nVal)
+               If nVal = 1 Or nVal = 2 Or nVal = 3 Then
+                  EgtSetInfo(nRaw1Id, K_ISNEWSCRAPS, "3")
+               End If
             End If
             ' Assegno ai nuovi grezzi eventuale texture del grezzo originale
             Dim nSolidId = EgtGetFirstNameInGroup(nRawId, NAME_RAW_SOLID)
@@ -369,10 +395,19 @@ Public Module SplitAuto
          ' passo al successivo grezzo
          nRawId = EgtGetNextRawPart(nRawId)
       End While
+      ' ---------------------------------- GREZZI ----------------------------------
       ' Cancello preview dei tagli allungati dalla lavorazione
       For Each nCut As Integer In vCuts
          RemoveMachiningPreview(nCut)
       Next
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      ChangeOperationPhase(nNewPhase)
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      Return True
+   End Function
+
+   ' Sposta le lavorzioni della fase precedente a quella indicata
+   Friend Sub ChangeOperationPhase_ERR(nNewPhase As Integer)
       ' Sposto tutte le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
       Dim nId = EgtGetFirstOperation()
       While nId <> GDB_ID.NULL
@@ -393,9 +428,50 @@ Public Module SplitAuto
          End If
          nId = nNextId
       End While
-      Return True
-   End Function
+   End Sub
 
+   ' Miglioramento della gestione delle lavorazioni
+   Friend Sub ChangeOperationPhase(nNewPhase As Integer)
+      ' creo l'elenco delle lavorazioni che devono essere sposate
+      Dim MchList As New List(Of Integer)
+      ' Recupero le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
+      Dim nId = EgtGetFirstOperation()
+      While nId <> GDB_ID.NULL
+         Dim nNextId = EgtGetNextOperation(nId)
+         If IsValidMachining(nId) And EgtGetOperationPhase(nId) = nNewPhase - 1 And EgtExistsInfo(nId, INFO_MCH_USER_OFF) Then
+            ' Provo ad inserire la lavorazione nell'elenco
+            AddMach(MchList, nId)
+            ' sposto le inglobate
+            Dim sInfo As String = String.Empty
+            If EgtGetInfo(nId, INFO_MCH_OTHMID, sInfo) Then
+               Dim sItems() As String = sInfo.Split(",".ToCharArray)
+               For Each sId2 As String In sItems
+                  Dim nId2 As Integer = 0
+                  StringToInt(sId2, nId2)
+                  If nId2 > 0 Then
+                     ' Provo ad inserire la lavorazione nell'elenco
+                     AddMach(MchList, nId2)
+                  End If
+               Next
+            End If
+         End If
+         nId = nNextId
+      End While
+      ' Procedo ora a spostare le lavorazioni nella nuova disposizione
+      For Each ItemMchId As Integer In MchList
+         EgtChangeOperationPhase(ItemMchId, nNewPhase)
+      Next
+   End Sub
+
+   ' Inserisce gli inidici delle lavorazioni evitando di inserire dei doppioni
+   Private Sub AddMach(MchList As List(Of Integer), IdMch As Integer)
+      For Each Item As Integer In MchList
+         If IdMch = Item Then
+            Return
+         End If
+      Next
+      MchList.Add(IdMch)
+   End Sub
    '-----------------------------------------------------------------------------------------------
    Friend Function CalculateSplitAuto() As Boolean
       ' Fase iniziale
@@ -737,35 +813,55 @@ Public Module SplitAuto
    End Function
 
    Private Function SafeMoveRawPart(nRawId As Integer, ByRef vtMove As Vector3d, dMindist As Double) As Boolean
+      ' Spostamento originale
+      Dim vtOriMove As New Vector3d( vtMove)
+      ' Livello di movimento
+      Dim nMoveLevel As Integer = GetPrivateProfileInt( S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
+      Dim nMove As Integer = 1
       ' Se esce dalla tavola, movimento già annullato ed esco con errore
-      If Not EgtMoveRawPart(nRawId, vtMove) Then Return False
+      If Not EgtMoveRawPart(nRawId, vtOriMove) Then Return False
       ' Se interferisce con altri grezzi, annullo movimento ed esco con errore
       If Not VerifyRawWithOtherRaws(nRawId, dMindist) Then
-         EgtMoveRawPart(nRawId, -vtMove)
+         EgtMoveRawPart(nRawId, -vtOriMove)
          Return False
       End If
+      If nMoveLevel < 2 Then Return True
       ' Provo ad aggiungere un altro movimento
-      If EgtMoveRawPart(nRawId, vtMove) Then
+      If EgtMoveRawPart(nRawId, vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += vtMove
+            vtMove += vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then Return True
          Else
-            EgtMoveRawPart(nRawId, -vtMove)
+            EgtMoveRawPart(nRawId, -vtOriMove)
+         End If
+      End If
+      ' Provo ad aggiungere un altro movimento
+      If EgtMoveRawPart(nRawId, vtOriMove) Then
+         If VerifyRawWithOtherRaws(nRawId, dMindist) Then
+            vtMove += vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then Return True
+         Else
+            EgtMoveRawPart(nRawId, -vtOriMove)
          End If
       End If
       ' Provo ad aggiungere un movimento dimezzato
-      If EgtMoveRawPart(nRawId, 0.5 * vtMove) Then
+      If EgtMoveRawPart(nRawId, 0.5 * vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += 0.5 * vtMove
+            vtMove += 0.5 * vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then return True
          Else
-            EgtMoveRawPart(nRawId, -0.5 * vtMove)
+            EgtMoveRawPart(nRawId, -0.5 * vtOriMove)
          End If
       End If
-      ' Provo ad aggiunger un movimento 1/4
-      If EgtMoveRawPart(nRawId, 0.25 * vtMove) Then
+      ' Provo ad aggiungere un movimento 1/4
+      If EgtMoveRawPart(nRawId, 0.25 * vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += 0.25 * vtMove
+            vtMove += 0.25 * vtOriMove
          Else
-            EgtMoveRawPart(nRawId, -0.25 * vtMove)
+            EgtMoveRawPart(nRawId, -0.25 * vtOriMove)
          End If
       End If
       Return True
@@ -817,4 +913,30 @@ Public Module SplitAuto
       Return (Not bInterf)
    End Function
 
+   Public Function MaxCuttingMustache(dMustache As Double) As Double
+      Dim MachSplitList As New List(Of SplitMach)
+      ' Recupero l'indice della fase corrente
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      ' se non è stata creata nessuna lista allora restituisco il valore di Default
+      If Not CalculateSplitMachList(nCurrPhase, MachSplitList) Then Return dMustache
+      Dim NewMustache As Double = 0
+      Dim ItemMachSplit As SplitMach
+      For Each ItemMachSplit In MachSplitList
+         ' Recupero lunghezza baffo secondo taglio
+         Dim nPvId As Integer = GDB_ID.NULL
+         EgtGetInfo(EgtGetFirstNameInGroup(ItemMachSplit.m_nId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+         Dim dDT As Double
+         If EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT) Then
+            If NewMustache < dDT Then NewMustache = dDT
+         End If
+      Next
+      Dim dExtraL As Double = 0
+      EgtMdbGetGeneralParam(MCH_GP.EXTRALONCUTREG, dExtraL)
+      ' se esiste il valore di un baffo allora sovrascrivo il valore di default
+      If NewMustache > 0 Then
+         dMustache = Math.Ceiling(NewMustache)
+      End If
+      Return dMustache + dExtraL
+   End Function
+
 End Module

CadCuts/SplitPageUC.xaml

@@ -38,7 +38,7 @@
                <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
             </Button>
             <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
+               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
                   <Image.RenderTransform>
                      <TransformGroup>
                         <RotateTransform Angle="180"/>
@@ -63,17 +63,27 @@
             <RowDefinition Height="1*"/>
          </Grid.RowDefinitions>
 
-         <ListBox Name="MachiningLsBx" Grid.Row="1" ItemTemplate="{DynamicResource NameIdLsBxItem}"
+         <ListBox Name="MachiningLsBx" Grid.Row="1"
             SelectionMode="Extended">
-            <ListBox.ItemContainerStyle>
-               <Style TargetType="ListBoxItem">
-                  <Style.Triggers>
-                     <DataTrigger Binding="{Binding bIsActive}" Value="False">
-                        <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
-                     </DataTrigger>
-                  </Style.Triggers>
-               </Style>
-            </ListBox.ItemContainerStyle>
+            <ListBox.ItemTemplate>
+               <DataTemplate>
+                  <TextBlock Text="{Binding Name}">
+                     <TextBlock.Style>
+                        <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_CurrProjSummeryTextBlock}">
+                           <Style.Triggers>
+                              <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                                 <Setter Property="TextDecorations" Value="Strikethrough"/>
+                                 <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                              </DataTrigger>
+                              <DataTrigger Binding="{Binding bIsActive}" Value="True">
+                                 <Setter Property="Foreground" Value="Black"/>
+                              </DataTrigger>
+                           </Style.Triggers>
+                        </Style>
+                     </TextBlock.Style>
+                  </TextBlock>
+               </DataTemplate>
+            </ListBox.ItemTemplate>
          </ListBox>
 
          <Grid Grid.Row="2">
@@ -100,9 +110,15 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="OnOffBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="AllOnBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="AllOffBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
+            <Button Name="OnOffBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource ON_OFF-singolo-taglioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllOnBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Tutti-ONImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllOffBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Tutti-OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
          </Grid>
 
@@ -113,9 +129,34 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="CutEndBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
+            <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            
+            <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Inizio-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+
+            <Button Name="CutEndBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Fine-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+
+            <!-- solo per macchine con lavorazioni Waterjet -->
+            <ToggleButton Name="BridgesWJBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource PonticelliWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
+
+             <!--solo per macchine con lavorazioni Waterjet--> 
+            <Button Name="QualityWJBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource QualityWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            
+            <!-- solo per macchine con lavorazioni Waterjet -->
+            <ToggleButton Name="BridgesDeleteWJBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource PonticelliDeleteWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
+
+           
 
          </Grid>
 
@@ -139,18 +180,42 @@
          </Grid.ColumnDefinitions>
 
 
-         <Button Name="OutCenStartBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="OutCenEndBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="ModifStartBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="ModifEndBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="InvertBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="PauseBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllOutStartBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllCenStartBtn" Grid.Column="7" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllOutEndBtn" Grid.Column="8" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllCenEndBtn" Grid.Column="9" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllExtendBtn" Grid.Column="10" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllReduceBtn" Grid.Column="11" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
+         <Button Name="OutCenStartBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Inizio-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="OutCenEndBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Fine-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="ModifStartBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Modifica-InizioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="ModifEndBtn" Grid.Column="3"  Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Modifica-FineImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="InvertBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource InvertiImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="PauseBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllOutStartBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Inizio-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllCenStartBtn" Grid.Column="7" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Inizio-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllOutEndBtn" Grid.Column="8" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Fine-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllCenEndBtn" Grid.Column="9" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Fine-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllExtendBtn" Grid.Column="10" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Tutti-allungaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllReduceBtn" Grid.Column="11" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Tutti-accorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
 
       </Grid>
 

CadCuts/VacuumCups.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports System.Text.RegularExpressions
 
 Module VacuumCups
    ' Tipo manipolatore con ventosa (0=assente, 1=dietro, 2=laterale)
@@ -8,7 +9,24 @@ Module VacuumCups
    Private m_nVacId As Integer = GDB_ID.NULL
    Private m_nRefId As Integer = GDB_ID.NULL
    Private m_dPreferredRot As Double = 0
+   Private m_dPrefVertRotXMinus As Double = 0
+   Private m_dPrefVertRotXPlus As Double = 0
+   Private m_dPrefVertRotYMinus As Double = 0
+   Private m_dPrefVertRotYPlus As Double = 0
    Private m_dDripRefAng As Double = 0
+   ' dati carico massimo manipolatore
+   Private m_RawDensity As Double = 2500
+   Private m_RawWeight As Double = 0
+   Private m_MaxWeightSinglePlugger As Double = 250
+   Private m_MaxWeightDoublePlugger As Double = 750
+   Public bOverWeight As Boolean = False
+   ' dati per rotazione ventose vicono al fine corsa Y e X
+   Private bRotateVacuumNearExtraStrokeY As Boolean = False
+   Private bRotateVacuumNearExtraStrokeX As Boolean = False
+   ' dati stroke
+   Public bExtraStroke As Boolean = False
+   Public ptStartPointLift As Point3d
+   Public dDegRotStartAng As Double
 
    ' Nome del gruppo temporaneo per le ventose
    Private Const VACTMP_GRP As String = "VacTmp"
@@ -48,6 +66,20 @@ Module VacuumCups
       Return m_nVacType
    End Function
 
+   ' carico i dati macchina relativi al peso massimo movimentabile
+   Friend Sub SetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
+      m_RawDensity = Density
+      m_MaxWeightSinglePlugger = MaxSingle
+      m_MaxWeightDoublePlugger = MaxDouble
+   End Sub
+
+   Friend Sub SetRotationForExtraStrokeY(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeY = Rotate
+   End Sub
+
+   Friend Sub SetRotationForExtraStrokeX(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeX = Rotate
+   End Sub
    Friend Function GetVacuumId() As Integer
       Return m_nVacId
    End Function
@@ -64,6 +96,8 @@ Module VacuumCups
       ' Identificativo riferimento della testa nella macchina
       Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT)
       If nT1Id = GDB_ID.NULL Then Return False
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", "H4", 1)
       ' Creo gruppo temporaneo in cui copiarli
       m_nTempId = EgtCreateGroup(GDB_ID.ROOT)
       If m_nTempId = GDB_ID.NULL Then Return False
@@ -74,6 +108,11 @@ Module VacuumCups
       If m_nVacId = GDB_ID.NULL Then Return False
       ' Angolo di rotazione preferito
       EgtGetInfo( m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
+      ' Angoli di rotazione preferiti per ventosa in verticale (lungo Y) a sinistra e a destra del centro tavola
+      EgtGetInfo( m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYMINUS, m_dPrefVertRotYMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYPLUS, m_dPrefVertRotYPlus)
       ' Direzione di riferimento per tagli Drip
       EgtGetInfo( m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
       ' Nascondo il gruppo ma rendo visibili le curve di contorno delle ventose
@@ -160,6 +199,18 @@ Module VacuumCups
       EgtGetBBoxGlob(nRKerfId, GDB_BB.STANDARD, b3Kerf)
       Dim ptKerfCen As Point3d
       EgtCentroid(nRKerfId, GDB_ID.ROOT, ptKerfCen)
+
+      '-------------------- INIZIO CALCOLO PESO --------------------
+      ' recupero l'area del grezzo da muovere
+      Dim RawArea As Double = 0
+      ' superficie del grezzo senza considerare eventuali fori
+      EgtSurfFrGrossArea(nRKerfId, RawArea)
+      ' volume calcolato in mmc
+      Dim RawVolume As Double = RawArea * b3Raw.DimZ()
+      ' peso calolato in kg
+      m_RawWeight = RawVolume * m_RawDensity / Math.Pow(10, 9)
+      '-------------------- FINE CALCOLO PESO --------------------
+
       ' Eseguo ricerca
       If FindVacuumCupsOnRaw(nRawId, ptRawCen, b3Kerf, ptKerfCen, nKerfId, nRKerfId, rmData) Then
          Return True
@@ -182,6 +233,7 @@ Module VacuumCups
       Return False
    End Function
 
+   ' utilizzata per gestire la movimentazione dei pezzi per eseguire i drip
    Friend Function PutVacuumCupsOnPart(nPartId As Integer,
                                        ByRef rmData As RawMoveData, ByRef b3Part As BBox3d) As Boolean
       ' Ripristino posizione originale ventose
@@ -261,6 +313,7 @@ Module VacuumCups
          Dim sCups() As String = Nothing
          Dim sCups2() As String = Nothing
          If Not GetVacuumCupSelection(nI, sCups, sCups2) Then Return False
+         bExtraStroke = False
          ' Determino validità soluzioni della configurazione
          Dim vtMove As New Vector3d
          Dim ptRotCen As New Point3d
@@ -289,6 +342,7 @@ Module VacuumCups
          Dim frCurrRef As New Frame3d
          EgtFrame(m_nRefId, GDB_ID.ROOT, frCurrRef)
          Dim vtDelta As Vector3d = frCurrRef.Orig() - ptRawCen
+
          ' Assegno dati noti al movimento del grezzo
          rmData.m_nId = nRawId
          rmData.m_vtRawMove = Vector3d.NULL()
@@ -363,6 +417,26 @@ Module VacuumCups
       If b3Vac.IsEmpty() Then Return INFINITO
       ' Se box maggiore di quello del pezzo, scarto soluzione
       If b3Vac.Radius() > b3Raw.Radius() Then Return INFINITO
+      '-------------------- INIZIO VERIFICA PESO --------------------
+      bOverWeight = False
+      Select Case GetPluggerFromCameras(sCups)
+         Case 2
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightDoublePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+         Case 1
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightSinglePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+      End Select
+      '-------------------- FINE VERIFICA PESO --------------------
+      ' Recupero l'area della tavola
+      Dim b3Tab As New BBox3d
+      EgtGetTableArea(1, b3Tab)
       ' Determino il movimento
       vtMove = ptRawCen - b3Vac.Center()
       b3Vac.Move(vtMove)
@@ -374,11 +448,30 @@ Module VacuumCups
          frMinRect.VersX().ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
          dRotAngDeg = dAngOrizzDeg
          If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
-         Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
-         While dRotAngDeg - m_dPreferredRot >= dAngDelta / 2 
+         Dim dPreferredRot As Double = m_dPreferredRot
+         ' -------------------- INIZIO GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
+         ' verifico l'orientamento del pezzo
+         If bRotateVacuumNearExtraStrokeX And Not IsHorizontal(dAngOrizzDeg) Then
+            ' se l'orientamento è verticale
+            If frMinRect.Orig().x < b3Tab.Center().x Then
+               dPreferredRot = m_dPrefVertRotXMinus
+            Else
+               dPreferredRot = m_dPrefVertRotXPlus
+            End If
+         ElseIf bRotateVacuumNearExtraStrokeY And IsHorizontal(dAngOrizzDeg) Then
+            ' se l'orientemanto è orizzontale e la macchina è stata abilitata
+            If frMinRect.Orig().y < b3Tab.Center().y Then
+               dPreferredRot = m_dPrefVertRotYPlus
+            Else
+               dPreferredRot = m_dPrefVertRotYMinus
+            End If
+         End If
+         ' -------------------- FINE GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
+         Dim dAngDelta As Double = If(Math.Abs(b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
+         While dRotAngDeg - dPreferredRot >= dAngDelta / 2
             dRotAngDeg -= dAngDelta
          End While
-         While dRotAngDeg - m_dPreferredRot <= -dAngDelta / 2
+         While dRotAngDeg - dPreferredRot <= -dAngDelta / 2
             dRotAngDeg += dAngDelta
          End While
       Else
@@ -430,13 +523,73 @@ Module VacuumCups
       ' Applico movimento e rotazione al punto
       ptRef.Move(vtMove)
       ptRef.Rotate(ptRotCen, Vector3d.Z_AX(), dRotAngDeg)
+
+      ' -------------- INIZIO verifica di essere nel limite delle corse macchina --------------
+      If VerifyOutOfStrokes(ptRef, dRotAngDeg) <> 0 Then
+         bExtraStroke = True
+         Return INFINITO
+      End If
+      ' se la posizione è accettbaile allora salvo i dati
+      ptStartPointLift = ptRef
+      dDegRotStartAng = dRotAngDeg
+      ' -------------- FINE verifica di essere nel limite delle corse macchina --------------
+
       ' Ne calcolo la distanza dal centro della tavola
-      Dim b3Tab As New BBox3d
-      EgtGetTableArea(1, b3Tab)
       Dim dDist As Double = Point3d.DistXY(ptRef, b3Tab.Center())
       Return dDist
    End Function
 
+   Private Function IsHorizontal(dDegAng As Double) As Boolean
+      If (Math.Abs(dDegAng) > 45 And Math.Abs(dDegAng) < 135) Or (Math.Abs(dDegAng) > 225 And Math.Abs(dDegAng) < 315) Then
+         Return False
+      End If
+      Return True
+   End Function
+
+   ' assegnate le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
+      ' Posizione Home dell'asse rotante
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      ' Corse dell'asse
+      Dim dCMin As Double
+      EgtGetAxisMin("C", dCMin)
+      Dim dCMax As Double
+      EgtGetAxisMax("C", dCMax)
+      ' Porto l'angolo nel range
+      Dim dRotAngMachDeg As Double = dRotAngDeg + dCHome
+      AdjustAngleInRange(dRotAngMachDeg, dCMin, dCMax)
+      ' Imposto la ventosa come fosse un utensile
+      EgtSetCalcTool("", "H4", 1)
+      ' Calcolo gli assi macchina
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      EgtGetCalcPositions(ptRef, dRotAngMachDeg, 0, nStat, dX, dY, dZ)
+      ' Verifico le corse
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngMachDeg, 0, nStat)
+      Return nStat
+   End Function
+
+   ' dall'informazione di extra corsa recupera il valore indicato
+   Public Function GetExtraStrokeValue(sInfo As String) As Double
+      Dim dExtraStroke As Double = 0
+      Dim sItems As String() = sInfo.Split("="c)
+      If sItems.Count = 2 Then
+         Dim nStartIndex As Integer = 0
+         For Each ItemChar As Char In sItems(1)
+            If ItemChar = "("c Then
+               Exit For
+            End If
+            nStartIndex += 1
+         Next
+         If nStartIndex > 0 Then
+            Dim sValue As String = sItems(1).Remove(nStartIndex, sItems(1).Count - nStartIndex)
+            StringToLen(sValue, dExtraStroke)
+         End If
+      End If
+      Return dExtraStroke
+   End Function
+
    Private Function TestVacuumCups(nCups() As Integer, nRawRegId As Integer,
                                    vtMove As Vector3d, ptRotCen As Point3d, dRotAngDeg As Double) As Boolean
       ' Eseguo verifica delle ventose rispetto al grezzo
@@ -457,6 +610,28 @@ Module VacuumCups
       Return bVacOk
    End Function
 
+   ' dato il vettore delle camere restituisco il quali attuatori sono coinvolti
+   Private Function GetPluggerFromCameras(sCups() As String) As Integer
+      Dim nCountPlunger As Integer = 1
+      Dim bPlugger1 As Boolean = False
+      Dim bPlugger2 As Boolean = False
+      For Each Camera As String In sCups
+         If (Camera.Contains("1") Or Camera.Contains("2") Or Camera.Contains("3")) Then
+            bPlugger1 = True
+         Else
+            bPlugger2 = True
+         End If
+      Next
+      ' verifico quali sono le camere attive
+      If bPlugger1 And bPlugger2 Then
+         nCountPlunger = 2
+      ElseIf Not bPlugger1 And Not bPlugger2 Then
+         nCountPlunger = 0
+      End If
+      ' restituisco il numero di Plugger in uso
+      Return nCountPlunger
+   End Function
+
    Friend Function SaveOneMoveInfo(nId As Integer, rmData As RawMoveData) As Boolean
       ' Assegno le informazioni
       EgtSetInfo(nId, "Id", rmData.m_nId)

Constants/ConstGen.vb

@@ -67,6 +67,8 @@ Module ConstGen
    Public Const MACHININGS_DIR As String = "Machinings"
    ' Nome file Dati delle lucidature
    Public Const KITS_FILE As String = "Kits.data"
+   ' Nome file Dati per waterJet
+   Public Const WATERJETDB_FILE As String = "WaterjetDB.data"
 
    ' File dei pezzi rovinati
    Public Const CURR_RUINED_EPL As String = "RuinedParts.epl"
@@ -90,6 +92,10 @@ Module ConstGen
    Public Const KEY_VACLAY_SEL As String = "Sel"
    ' Info in gruppo layout per angolo di rotazione preferito
    Public Const KEY_VACLAY_PREFROT As String = "PreferredRot"
+   Public Const KEY_VACLAY_PREFVROTXMINUS As String = "PrefVertRotXMinus"
+   Public Const KEY_VACLAY_PREFVROTXPLUS As String = "PrefVertRotXPlus"
+   Public Const KEY_VACLAY_PREFVROTYMINUS As String = "PrefVertRotYMinus"
+   Public Const KEY_VACLAY_PREFVROTYPLUS As String = "PrefVertRotYPlus"
    ' Info in gruppo layout per direzione di riferimento ventose per tagli da sotto
    Public Const KEY_VACLAY_DRIPREFDIR As String = "DripRefDir"
    ' Info in asse rotante ventosa per step discreti
@@ -143,6 +149,9 @@ Module ConstGen
    Public Const INFO_RAW_BLOCK = "Block"
    ' Info per numero lastra nel blocco
    Public Const INFO_RAW_SLABNBR = "SlabNbr"
+   ' Info per identificazione gruppo pezzi
+   Public Const INFO_REFGROUP As String = "RefGroup"
+   Public Const INFO_COUNTERLY As String = "CounterPz"
 
    ' Contrassegno di progetto OmagCut
    Public Const NAME_PROJMARK As String = "OmagCut"
@@ -178,6 +187,10 @@ Module ConstGen
    Public Const INFO_TOTAREA As String = "TotArea"
    ' Info per area da produrre dei pezzi del progetto
    Public Const INFO_TOPRODAREA As String = "ToProdArea"
+   ' Info per nome progetti
+   Public Const INFO_PROJNAME As String = "ProjName"
+   ' Info per parcheggio asse C
+   Public Const INFO_CAXESHOME As String = "CAxesHome"
 
    ' Nome layer delle regioni
    Public Const NAME_REGION As String = "Region"
@@ -203,6 +216,8 @@ Module ConstGen
    Public Const INFO_DEPTH As String = "Depth"
    Public Const INFO_WIDTH As String = "Width"
    Public Const INFO_DEPTH2 As String = "Depth2"
+   Public Const INFO_AGG2 As String = "Agg2"
+   Public Const INFO_ROUNDOFF As String = "RoundOff"
    ' Info in entità da tagliare per taglio ristretto
    Public Const INFO_STRICT As String = "Strict"
    ' Info in entità da tagliare per angolo di lato e tallone
@@ -292,6 +307,12 @@ Module ConstGen
    Public Const INFO_PARTOK As String = "POK"
    ' Info in pezzo per stato rotazione
    Public Const INFO_PARTROT As String = "ROT"
+   ' Info in entità in OutLoop per indicare se è separata WaterJet
+   Public Const INFO_JOINENTITY As String = "JoinEntity"
+   ' Nome layer per "*" inidcanti un lato separato nel taglio WaterJet
+   Public Const INFO_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
+   ' Info in OutLoop per punto inzio lavorazione WaterJet
+   Public Const INFO_START As String = "Start"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"
@@ -324,6 +345,11 @@ Module ConstGen
    ' Info in pezzo per facet di ultima superficie selezionata
    Public Const INFO_FRAME_FACET As String = "Facet"
 
+   ' Nome del groppo dei ponticelli per lavorazioni Water
+   Public Const BRIDGES As String = "Bridges"
+   ' Nome dell'entità ponticello contenuta nel gruppo BRIDGES
+   Public Const BRIDGELINE As String = "BridgeLine"
+
    ' utensile per le lavorazioni manuali
    Public Const DUMMY_SAW As String = "DummySAW"
    ' lavorazione manuale
@@ -334,6 +360,8 @@ Module ConstGen
    ' Nome di pezzo temporaneo che serve per copia dime
    Public Const NAME_COPYTEMPLATE As String = "CopyTemplate"
 
+   ' Nome layer solidi per VM
+   Public Const NAME_VM_SOLID As String = "Solid"
    ' Chiave per Id originale del pezzo per VeinMatch
    Public Const KEY_ORI_ID As String = "OriId"
 
@@ -343,6 +371,9 @@ Module ConstGen
    ' Lunghezza libera infinita
    Public Const FREELEN_INF = 9999
 
+   ' Costante per lunghezza gambo di lama
+   Public Const STEM = 131072
+
    ' Colori per lavorazioni
    Public Function COL_MCH_CUT() As Color3d
       Return New Color3d(0, 255, 0)
@@ -362,6 +393,9 @@ Module ConstGen
    Public Function COL_MCH_DRIPCUT() As Color3d
       Return New Color3d(255, 0, 165)
    End Function
+   Public Function COL_MCH_ONENGRAVE_ANG() As Color3d
+      Return New Color3d(255, 255, 100)
+   End Function
    Public Function COL_MCH_DRIPFREE() As Color3d
       Return New Color3d(192, 0, 128)
    End Function

Constants/ConstIni.vb

@@ -18,6 +18,7 @@ Module ConstIni
    Public Const S_GENERAL As String = "General"
    Public Const K_DEBUG As String = "Debug"
    Public Const K_LICENCE As String = "Licence"
+   Public Const K_NETKEY As String = "NetKey"
    Public Const K_MESSAGESDIR As String = "MessagesDir"
    Public Const K_MESSAGES As String = "Messages"
    Public Const K_SUPPORT As String = "Support"
@@ -46,6 +47,12 @@ Module ConstIni
    Public Const K_THEME As String = "Theme"
    Public Const K_MANUAL_CUT As String = "ManualCut"
    Public Const K_TEST As String = "Test"
+   Public Const K_SMARTMACHININGPAGE As String = "SmartMachiningPage"
+   Public Const K_STARTPROGRAM As String = "StartProgram"
+   Public Const K_GENERATECN As String = "GenerateCN"
+   Public Const K_FRACTIONPATTERN As String = "FractionPattern"
+   Public Const K_PRECISION As String = "Precision"
+
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"
@@ -105,6 +112,17 @@ Module ConstIni
    Public Const K_TRFDATA As String = "TrfData"
    Public Const K_CSVDATA As String = "CsvData"
    Public Const K_COMPODIR As String = "CompoDir"
+   Public Const K_CMP_COUNT As String = "Count"
+   Public Const K_LASTCOLOR As String = "LastColor"
+   Public Const K_COLOR As String = "Color"
+
+   Public Const S_FRAMECOMPO As String = "FrameCompo"
+
+   Public Const S_EXTCOMPO As String = "Compo"
+
+   Public Const S_INTCOMPO As String = "InternalCompo"
+   Public Const K_INT_COMPODIR As String = "CompoDir"
+   Public Const K_INT_COUNT As String = "Count"
 
    Public Const S_FLATPARTS As String = "FlatParts"
    Public Const K_FLPCURRDIR As String = "CurrDir"
@@ -120,7 +138,9 @@ Module ConstIni
    Public Const K_ENGRAVENUMBER2 As String = "EngraveNumber2"
    Public Const K_ENGRAVEOFFSET2 As String = "EngraveOffset2"
    Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
+   Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
    Public Const K_ENGRAVESHORT As String = "EngraveShort"
+   Public Const K_ENGRAVEANGLE As String = "EngraveAngle"
    Public Const K_DRIPOFFSET As String = "DripOffset"
    Public Const K_DRIPOFFSET2 As String = "DripOffset2"
    Public Const K_DRIPDEPTH As String = "DripDepth"
@@ -128,6 +148,7 @@ Module ConstIni
    Public Const K_UNDERDRILLDEPTH As String = "UnderDrillDepth"
    Public Const K_FILOTOPOFFSET As String = "FiloTopOffset"
    Public Const K_FILOTOPDEPTH As String = "FiloTopDepth"
+   Public Const K_ROUNDOFF As String = "RoundOff"
 
    Public Const S_NEST As String = "Nest"
    Public Const K_DIRECT As String = "Direct"
@@ -139,6 +160,11 @@ Module ConstIni
    Public Const K_TEXTCOLOR As String = "TextColor"
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
+   Public Const K_DRAG_RETTANGLE As String = "DragRectangle"
+   Public Const K_STARTENDMODIFYONINTCORNER As String = "StartEndModifyOnIntCorner"
+
+   Public Const S_SPLIT As String = "Split"
+   Public Const K_MOVE_LEV As String = "MoveLevel"
 
    Public Const S_CSV As String = "Csv"
    Public Const K_FULL As String = "Full"
@@ -151,6 +177,14 @@ Module ConstIni
    Public Const K_CSVCURRDIR As String = "CurrDir"
    Public Const K_CSVLASTFILE As String = "LastFile"
 
+   Public Const S_TRF As String = "TRF"
+   Public Const K_ORDCODE As String = "OrdCode"
+   Public Const K_ORDDESC As String = "OrdDesc"
+   Public Const K_PARTCODE As String = "PartCode"
+   Public Const K_MATCODE As String = "MatCode"
+   Public Const K_SURFCODE As String = "SurfCode"
+   Public Const K_TRFTHICKNESS As String = "TrfThickness"
+
    Public Const S_SLABDXF As String = "SlabDxf"
    Public Const K_IMPORTSLABDXF As String = "ImportSlabDxf"
    Public Const K_SLABLAYER As String = "SlabLayer"
@@ -191,12 +225,27 @@ Module ConstIni
    Public Const K_RAWOFFSX As String = "OffsX"
    Public Const K_RAWOFFSY As String = "OffsY"
    Public Const K_RAWKERF As String = "Kerf"
+   Public Const K_ENABLEOTHERREFTAB As String = "EnableOtherRefTab"
+   Public Const K_OTHERREFTAB As String = "OtherRefTab"
+   Public Const K_OTHERREFTABX As String = "OtherRefTabX"
+   Public Const K_OTHERREFTABY As String = "OtherRefTabY"
+   Public Const K_OTHERREFTABPOS As String = "OtherRefTabPos"
+
 
    Public Const S_RAWMOVE As String = "RawMove"
    Public Const K_RAWSTEP As String = "Step"
    Public Const K_RAWROTATION As String = "Rotation"
    Public Const K_PERPENDICULAR As String = "Perpendicular"
 
+   Public Const S_SCRAPS As String = "Scraps"
+   Public Const K_ENABLESCRAPS As String = "EnableScraps"
+   Public Const K_PHOTODIR As String = "PhotoDir"
+   Public Const K_LASTBLOCK As String = "LastBlock"
+   Public Const K_TEMPLATE As String = "Template"
+   Public Const K_DAT As String = "Dat"
+   Public Const K_ZEBRAUTILITIES As String = "ZebraUtilities"
+   Public Const K_ENABLE_PRINTER As String = "EnablePrinter"
+
    Public Const S_REG As String = "Reg"
    Public Const K_REGSTEP As String = "Step"
    Public Const K_REGANGSTEP As String = "AngStep"
@@ -289,6 +338,9 @@ Module ConstIni
    Public Const K_DC_TEST_LENGTH As String = "TestLength"
    Public Const K_DC_TEST_ANGH As String = "TestAngH"
    Public Const K_DC_TEST_OFFSET As String = "TestOffset"
+   Public Const K_DC_OFFSET_SQUARING As String = "OffsetSquaring"
+   Public Const K_DC_EXTRA_LEN_SQUARING As String = "ExtraLenSquaring"
+   Public Const K_ENABLEINVERT As String = "EnableInvert"
 
    Public Const S_STATDATA As String = "StatData"
    Public Const K_SD_DAY As String = "Day"

Constants/ConstKitData.vb

@@ -11,9 +11,18 @@
    Public Const K_ZIGZAGX As String = "ZigZagX"
    Public Const K_OFFZIGZAGX As String = "OffZigZagX"
    Public Const K_STEPX As String = "StepX"
+   Public Const K_RADIUSX As String = "RadiusX"
+   Public Const K_DISTANCEX As String = "DistanceX"
    Public Const K_ZIGZAGY As String = "ZigZagY"
    Public Const K_OFFZIGZAGY As String = "OffZigZagY"
    Public Const K_STEPY As String = "StepY"
+   Public Const K_RADIUSY As String = "RadiusY"
+   Public Const K_DISTANCEY As String = "DistanceY"
+   Public Const K_SPIRAL As String = "Spiral"
+   Public Const K_OFFSPIRAL As String = "OffSpiral"
+   Public Const K_STEPSPIRAL As String = "StepSpiral"
+   Public Const K_RADIUSSPIRAL As String = "RadiusSpiral"
+   Public Const K_DISTANCESPIRAL As String = "DistanceSpiral"
    Public Const K_LILEN As String = "LiLen"
    Public Const K_LIHEIGHT As String = "LiHeight"
    Public Const K_LILOAD As String = "LiLoad"

Constants/ConstMachIni.vb

@@ -37,15 +37,29 @@
    Public Const K_PATH_HMI As String = "PathHmi"
    Public Const K_USENEWMDI As String = "UseNewMDI"
    Public Const K_ISSIEMENSONE As String = "IsSiemensOne"
+   Public Const K_ISACTIVEMODESUBSCR As String = "IsActiveModeSubscr"
    Public Const K_DBVARPATH As String = "DBVarPath"
+   Public Const K_NEWWRITECNCMODE As String = "NewWriteCNCMode"
 
    Public Const S_NCNUM As String = "NcNUM"
    Public Const K_RESETSENDDELAY As String = "ResetSendDelay"
    Public Const K_THREADSLEEP As String = "ThreadSleep"
+   Public Const K_PHOTODELEY As String = "PhotoDeley"
+
+   Public Const S_NCFANUC As String = "NcFanuc"
+   Public Const K_SETNCMODE As String = "SetNcMode"
+   Public Const K_BASEADDRINT As String = "BaseAddrInt"
+   Public Const K_BASEADDRBIT As String = "BaseAddrBit"
+   Public Const K_NUMVARINT As String = "NumVarInt"
+   Public Const K_NUMVARBIT As String = "NumVarBit"
+
+   Public Const S_EXECLUA As String = "ExecLua"
+   Public Const K_FILESCRIPT_LUA As String = "FileScript"
 
    Public Const S_NCDATA As String = "NcData"
    Public Const K_NEWVARIABLE As String = "NewVariable"
    Public Const K_NEWCONSOLE As String = "NewConsole"
+   Public Const K_WRITECNCMODEVAR As String = "WriteCNCModeVar"
    Public Const K_COMM As String = "Comm"
    Public Const K_REFRESH As String = "Refresh"
    Public Const K_MODE As String = "Mode"
@@ -71,8 +85,12 @@
    Public Const K_TABLEDOWN As String = "TableDown"
    Public Const K_MANUAL As String = "Manual"
    Public Const K_DOORCLOSED As String = "DoorClosed"
+   Public Const K_DOOROPENDED As String = "DoorOpened"
    Public Const K_LIMITZ As String = "LimitZ"
    Public Const K_POWEROVR As String = "PowerOvr"
+   Public Const K_PARKING As String = "Parking"
+   Public Const K_ENABLEZONE As String = "EnableZone"
+   Public Const K_ENABLEPC As String = "EnablePC"
    Public Const K_HSM As String = "Hsm"
    Public Const K_VACUUMUP As String = "VacuumUp"
    Public Const K_VACUUMDOWN As String = "VacuumDown"
@@ -100,6 +118,9 @@
    Public Const K_VACUUMOFF As String = "VacuumOff"
    Public Const K_BYPASSTATE As String = "BypassState"
    Public Const K_FEEDHOLD As String = "FeedHold"
+   Public Const K_SPOTLIGHT1 As String = "SpotLight1"
+   Public Const K_SPOTLIGHT2 As String = "SpotLight2"
+   Public Const K_NAXES As String = "nAxes"
    ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
    Public Const K_XYJOG As String = "XYJog"
@@ -107,6 +128,7 @@
    Public Const K_ZBJOG As String = "ZBJog"
    Public Const K_POWERON As String = "PowerON"
    Public Const K_POWEROFF As String = "PowerOFF"
+   Public Const K_REMOTE As String = "Remote"
 
    Public Const S_PRODUCTIONLINE As String = "ProductionLine"
    Public Const K_ACTIVE As String = "Active"
@@ -205,6 +227,12 @@
    Public Const K_MACH_CUTFSEVENABLE As String = "CutFsevEnable"
    Public Const K_MACH_CUTFSEVLEN As String = "CutFsevLen"
    Public Const K_MACH_CUTFSEVPERC As String = "CutFsevPerc"
+   Public Const K_USELASERORIGIN As String = "UseLaserOrigin"
+   Public Const K_HOLES_DIAMITERWJ As String = "HolesDiameterWJ"
+   Public Const K_HOLES_OFFSETWJ As String = "HolesOffsetWJ"
+   Public Const K_MIN_RADIUSWJ As String = "MinRadiusWJ"
+   Public Const K_MACH_DRILLINGWJ_ON_CORNERS As String = "DrillingWJOnCorners"
+   Public Const K_MACH_RECTIFICATION_ON_SUBSQUARE As String = "RectificationSubSqWJ"
    ' DrillMillC90
    ' CutLongDxSx
    ' AngRotMultiCut
@@ -217,6 +245,13 @@
    Public Const S_MACH_RAWMOVE As String = "RawMove"
    Public Const K_MACH_RM_ROTATE As String = "Rotate"
    Public Const K_MACH_RM_FINALMOVE As String = "FinalMove"
+   Public Const K_MACH_WEIGHT_SINGLEPLUGGER As String = "MaxWeightSinglePlugger"
+   Public Const K_MACH_WEIGHT_DOUBLEPLUGGER As String = "MaxWeightDoublePlugger"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEY As String = "RotateVacuumForExtraStrokeY"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEX As String = "RotateVacuumForExtraStrokeX"
+
+   Public Const K_ISNEWSCRAPS As String = "IsNewScraps"
+   Public Const K_DATABASEID As String = "DatabaseID"
 
    Public Const S_MACH_REG As String = "Reg"
    Public Const K_MACH_MAX_ROT_ANG As String = "MaxRotAng"
@@ -240,10 +275,12 @@
 
    Public Const S_MACH_INPROGRESS As String = "InProgress"
    Public Const K_PHASEVAR As String = "PhaseVar"
+   Public Const K_WP_STEPTIME As String = "WPStepTime"
 
    Public Const S_MACH_PROBING As String = "Probing"
    Public Const K_PROBINGSTATEVAR As String = "ProbingStateVar"
    Public Const K_SAWDIAMETER As String = "SawDiameter"
+   Public Const K_TOOLLENGTH As String = "ToolLength"
    Public Const K_RAWTHICKNESS As String = "RawThickness"
    Public Const K_ENABLERAWPROBE As String = "EnableRawProbe"
 
@@ -272,9 +309,12 @@
    Public Const K_CURRDRIPSAWING As String = "CurrDripSawing"
    Public Const K_CURRDRIPDRILLING As String = "CurrDripDrilling"
    Public Const K_CURRWATERJETTING As String = "CurrWaterJetting"
+   Public Const K_CURRWATERJETTINGQUALITY As String = "CurrWaterJettingQualilty"
 
    Public Const S_MATERIALS As String = "Materials"
    Public Const K_CURRMATERIAL As String = "CurrMaterial"
    Public Const K_MATERIAL As String = "Material"
+   Public Const K_FROMDBWATERJET As String = "FromDBWaterJet"
+   Public Const K_AVERAGEDENSITY As String = "AverageDensity"
 
 End Module

DirectCuts/ControlsDirectCutUC.xaml

@@ -0,0 +1,177 @@
+<UserControl x:Class="ControlsDirectCutUC"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             DataContext="Self"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:OmagCUT="clr-namespace:OmagCUT"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
+
+   <Grid Name="LeftButtonGrid" Grid.Row="1" >
+      <Grid.RowDefinitions>
+         <!--<RowDefinition Height="1*"/>
+            <RowDefinition Height="7*"/>-->
+         <RowDefinition Height="9*"/>
+      </Grid.RowDefinitions>
+      <!-- Definizione della Grid laterale -->
+      <Grid Name="CutTypeGrid" Grid.Row="1" >
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <!--<RowDefinition Height="1*"/>-->
+         </Grid.RowDefinitions>
+         <Button Name="ManualBtn" Grid.Column="2" Grid.Row="0"                    
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Movimento-manualeImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="ManualTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="SingleCutBtn" Grid.Row="1"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-singoloImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SingleCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="MultipleCutBtn" Grid.Row="2"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-multiploImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="MultipleCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="GridCutBtn" Grid.Row="3"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-grigliaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="GridCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+
+         <Button Name="SingleDrillBtn" Grid.Row="4"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Foro-singoloImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SingleDrillTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="FlatteningCutBtn" Grid.Row="5"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource SpianaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="FlatteningCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <!--<Button Name="PolishingBtn" Grid.Row="6"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="PolishingTxt" Grid.Column="1"
+                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>-->
+
+         <!--<Button Name="CopyTemplateBtn" Grid.Row="7"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>-->
+
+         <Button Name="SquaringBtn" Grid.Row="6"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SquaringTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <!--<Button Name="SawTestBtn" Grid.Row="6"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="80"/>
+                        <ColumnDefinition Width="140"/>
+                    </Grid.ColumnDefinitions>
+                    <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                    <TextBlock Name="SawTestTxt" Grid.Column="1"
+                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                </Grid>
+            </Button>-->
+
+         <Grid Name="ChangeUCGrid" Grid.Row="7">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="ChangeUCBtn" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Grid>
+                  <!--<Image Name="ImageCompo9" Source="{DynamicResource NumericKeyboardArrowImg}" />-->
+                  <TextBlock Name="ChangeUCTxBl" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+               </Grid>
+            </Button>
+         </Grid>
+
+      </Grid>
+   </Grid>
+</UserControl>

DirectCuts/ControlsDirectCutUC.xaml.vb

@@ -0,0 +1,265 @@
+Imports EgtUILib
+Public Class ControlsDirectCutUC
+
+   ' Dichiarazione delle Page UserControl
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   ' ---- MAI USATA ---- nuova finestra per i comandi per il taglio manuale nuovo
+   Friend m_SingleCutAuto As SingleCutAuto
+   ' ---- MAI USATA ----
+   Friend m_MachineButtons As MachineButtonsUC
+   Friend m_ManualAxesMove As ManualAxesMoveUC
+   Friend m_SingleCut As SingleCutUC
+   Friend m_SingleDrill As SingleDrillUC
+   Friend m_MultipleCut As MultipleCut
+   Friend m_GridCut As GridCut
+   Friend m_FlatteningCut As FlatteningCut
+   Friend m_Squaring As SquaringUC
+   Friend m_ControlsMachineButton As ControlsMachineButtonUC
+   Friend m_VacuumMachineButton As VacuumMachineButtonUC
+
+   Friend m_ControlDirectCutPage1 As ControlsDirectCutUC1
+
+   ' Stato di visualizzazione della macchina
+   Friend m_bShowMachine As Boolean = False
+   Friend m_nMachLook As Integer = MCH_LOOK.ALL
+   ' Dati generali CN
+   Friend m_CN As CN_generico
+   Private m_bFirst As Boolean = True
+   ' Riferimento alla pagina correntemente attiva
+   Friend m_ActiveDirectCutPage As DirectCutPages = DirectCutPages.DirectCut
+   ' Variabili che indicano attivazione paginette con bottoni macchina
+   Private m_ControlsBtn_IsActive As Boolean
+
+   Public Shared m_dZSafe As Double = 52
+
+   ' Variabile che indica se sono attivi i bottoni macchina nuovi o vecchi
+   Friend m_NewMachineButtonsType As Boolean
+   ' Indica che la finestra del talio Singolo deve essere di tipo manuale
+   Friend m_bManulaCut As Boolean = False
+
+   ' elenco dei nuovi bottoni
+   Private m_ButtonJogList As New List(Of MachineButton)
+
+   Enum DirectCutPages
+      ' pagina principale di tagli diretti
+      DirectCut
+      ' nuova pagina di tagli diretti
+      DirectCut1
+      ' elenco dei comandi associati
+      ManualAxesMove
+      SingleCut
+      MultipleCut
+      GridCut
+      FlatteningCut
+      Polishing
+      CopyTemplate
+      SawTest
+      SingleCutAuto
+      SingleDrill
+      Squaring
+   End Enum
+
+   Private Sub ControlsDirectCutUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' leggo la configurazione del programma per i nuovi tagli manuali
+      m_bManulaCut = GetPrivateProfileInt(S_GENERAL, K_MANUAL_CUT, 0, m_MainWindow.GetIniFile()) <> 0
+
+      'Creazione delle Page UserControl
+      m_MachineButtons = New MachineButtonsUC
+      m_ManualAxesMove = New ManualAxesMoveUC
+      m_SingleCut = New SingleCutUC
+      m_SingleDrill = New SingleDrillUC
+      m_MultipleCut = New MultipleCut
+      m_GridCut = New GridCut
+      m_FlatteningCut = New FlatteningCut
+      m_Squaring = New SquaringUC
+      m_ControlsMachineButton = New ControlsMachineButtonUC
+      m_VacuumMachineButton = New VacuumMachineButtonUC
+      ' reiferimento alla pagina succesiva
+      m_ControlDirectCutPage1 = New ControlsDirectCutUC1
+      ' Costruisco la finestra per il nuovo tipo di taglio manuale
+      m_SingleCutAuto = New SingleCutAuto
+
+      'Posizionemento nella griglia delle Page UserControl DirectCutPageUC
+      m_MachineButtons.SetValue(Grid.RowProperty, 2)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 7)
+      m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
+      If m_bManulaCut Then
+         m_SingleCutAuto.SetValue(Grid.RowProperty, 1)
+      Else
+         m_SingleCut.SetValue(Grid.RowProperty, 1)
+      End If
+      m_SingleDrill.SetValue(Grid.RowProperty, 1)
+      m_MultipleCut.SetValue(Grid.RowProperty, 1)
+      m_GridCut.SetValue(Grid.RowProperty, 1)
+      m_FlatteningCut.SetValue(Grid.RowProperty, 1)
+      m_Squaring.SetValue(Grid.RowProperty, 1)
+      m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
+      m_VacuumMachineButton.SetValue(Grid.RowProperty, 1)
+
+      ' ManualBtn.Content = EgtMsg(90201)
+      ManualTxt.Text = EgtMsg(90201)
+      'SingleCutBtn.Content = EgtMsg(90202)
+      SingleCutTxt.Text = EgtMsg(90202)
+      'SingleDrillBtn.Content = "Foro singolo"
+      SingleDrillTxt.Text = EgtMsg(90258)
+      'MultipleCutBtn.Content = EgtMsg(90203)
+      MultipleCutTxt.Text = EgtMsg(90203)
+      'GridCutBtn.Content = EgtMsg(90204)
+      GridCutTxt.Text = EgtMsg(90204)
+      'FlatteningCutBtn.Content = EgtMsg(90206)
+      FlatteningCutTxt.Text = EgtMsg(90206)
+      ' 90261=Squaring
+      SquaringTxt.Text = EgtMsg(90261)
+      ' 90409=Others
+      ChangeUCTxBl.Text = EgtMsg(90409)
+
+   End Sub
+
+   Private Sub ControlsDirectCutUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      ' Se rientro da simulazione
+      If m_ActiveDirectCutPage = DirectCutPages.SingleCut Then
+         LeftButtonGrid.Children.Add(m_SingleCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto Then
+         LeftButtonGrid.Children.Add(m_SingleCutAuto)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.MultipleCut Then
+         LeftButtonGrid.Children.Add(m_MultipleCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.GridCut Then
+         LeftButtonGrid.Children.Add(m_GridCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.FlatteningCut Then
+         LeftButtonGrid.Children.Add(m_FlatteningCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleDrill Then
+         LeftButtonGrid.Children.Add(m_SingleDrill)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.Squaring Then
+         LeftButtonGrid.Children.Add(m_Squaring)
+         Return
+      End If
+
+      If m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.MachineButtonUC Or
+         m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.VacuumButtonUC Then
+         ' Caso standard
+         m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      End If
+
+      ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
+      Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
+      Dim bH1Exists As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+
+      ManualBtn.IsEnabled = bH1Exists
+      ' sviluppo rimasto in sospeso
+      If m_bManulaCut Then
+         ' anche se non è presente un grezzo mantengo abilitato il bottone
+         SingleCutBtn.IsEnabled = True
+      Else
+         SingleCutBtn.IsEnabled = bRawOk
+      End If
+      MultipleCutBtn.IsEnabled = bRawOk
+      GridCutBtn.IsEnabled = bRawOk
+      SingleDrillBtn.IsEnabled = (bRawOk And bH1Exists)
+      FlatteningCutBtn.IsEnabled = (bRawOk And bH1Exists)
+      SquaringBtn.IsEnabled = bRawOk
+
+      ' aggiorno la visualizzazione dei parametri
+      ReloadParam()
+
+      ' Nascondo i pezzi in parcheggio
+      HideParkedParts()
+      EgtZoom(ZM.ALL)
+
+   End Sub
+
+   ' ricarico i parametri utensili per definizione 
+   Public Sub ReloadParam()
+      Dim sCurrSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sCurrSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim bSaw As Boolean = False
+
+      ' se esiste una lavorazione di lama corrente vuol dire che deve essere preferita
+      If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
+         bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
+      End If
+      m_SingleCut.SetEnableParam(bSaw)
+      m_MultipleCut.SetEnableParam(bSaw)
+      m_GridCut.SetEnableParam(bSaw)
+   End Sub
+
+#Region "COMMAND CLICK BTN"
+
+   Private Sub ManualBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualBtn.Click
+      LeftButtonGrid.Children.Add(m_ManualAxesMove)
+      m_ActiveDirectCutPage = DirectCutPages.ManualAxesMove
+   End Sub
+
+   Private Sub SingleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleCutBtn.Click
+      If m_bManulaCut Then
+         LeftButtonGrid.Children.Add(m_SingleCutAuto)
+         m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto
+      Else
+         LeftButtonGrid.Children.Add(m_SingleCut)
+         m_ActiveDirectCutPage = DirectCutPages.SingleCut
+      End If
+
+   End Sub
+
+   Private Sub MultipleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles MultipleCutBtn.Click
+      LeftButtonGrid.Children.Add(m_MultipleCut)
+      m_ActiveDirectCutPage = DirectCutPages.MultipleCut
+   End Sub
+
+   Private Sub GridCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles GridCutBtn.Click
+      LeftButtonGrid.Children.Add(m_GridCut)
+      m_ActiveDirectCutPage = DirectCutPages.GridCut
+   End Sub
+
+   Private Sub FlatteningCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles FlatteningCutBtn.Click
+      LeftButtonGrid.Children.Add(m_FlatteningCut)
+      m_ActiveDirectCutPage = DirectCutPages.FlatteningCut
+   End Sub
+
+   Private Sub SquaringBtn_Click(sender As Object, e As RoutedEventArgs) Handles SquaringBtn.Click
+      LeftButtonGrid.Children.Add(m_Squaring)
+      m_ActiveDirectCutPage = DirectCutPages.Squaring
+   End Sub
+
+   Private Sub SingleDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleDrillBtn.Click
+      LeftButtonGrid.Children.Add(m_SingleDrill)
+      m_ActiveDirectCutPage = DirectCutPages.SingleDrill
+   End Sub
+
+   ' cambio pagina
+   Private Sub ChangeUCBtn_Click(sender As Object, e As RoutedEventArgs) Handles ChangeUCBtn.Click
+      DirectCutPage_Unloaded(Nothing, Nothing)
+      m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      m_MainWindow.m_DirectCutPageUC.LoadDirectCutUC1()
+   End Sub
+
+#End Region    ' Command Click Btn
+
+
+   Friend Sub DirectCutPage_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      Select Case m_ActiveDirectCutPage
+         Case DirectCutPages.DirectCut Or DirectCutPages.ManualAxesMove
+            ' Non è necessario fare alcunché
+         Case DirectCutPages.SingleCut
+            LeftButtonGrid.Children.Remove(m_SingleCut)
+         Case DirectCutPages.SingleCutAuto
+            LeftButtonGrid.Children.Remove(m_SingleCutAuto)
+         Case DirectCutPages.MultipleCut
+            LeftButtonGrid.Children.Remove(m_MultipleCut)
+         Case DirectCutPages.GridCut
+            LeftButtonGrid.Children.Remove(m_GridCut)
+         Case DirectCutPages.FlatteningCut
+            LeftButtonGrid.Children.Remove(m_FlatteningCut)
+         Case DirectCutPages.SingleDrill
+            LeftButtonGrid.Children.Remove(m_SingleDrill)
+         Case DirectCutPages.Squaring
+            LeftButtonGrid.Children.Remove(m_Squaring)
+      End Select
+   End Sub
+
+End Class

DirectCuts/ControlsDirectCutUC1.xaml

@@ -0,0 +1,86 @@
+<UserControl x:Class="ControlsDirectCutUC1"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             DataContext="Self"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:OmagCUT="clr-namespace:OmagCUT"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
+
+   <Grid Name="LeftButtonGrid" Grid.Row="1" >
+      <Grid.RowDefinitions>
+         <!--<RowDefinition Height="1*"/>
+            <RowDefinition Height="7*"/>-->
+         <RowDefinition Height="9*"/>
+      </Grid.RowDefinitions>
+      <!-- Definizione della Grid laterale -->
+      <Grid Name="CutTypeGrid" Grid.Row="1" >
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <!--<RowDefinition Height="1*"/>-->
+         </Grid.RowDefinitions>
+
+         <Button Name="SawTestBtn" Grid.Row="0"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SawTestTxt" Grid.Column="1"
+                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="PolishingBtn" Grid.Row="1"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="PolishingTxt" Grid.Column="1"
+                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="CopyTemplateBtn" Grid.Row="2"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Grid Name="ChangeUC1Grid" Grid.Row="7">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="ChangeUC1Btn" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Grid>
+                  <Image Name="ImageCompo9" Source="{DynamicResource NumericKeyboardArrowImg}" />
+                  <!--<TextBlock Name="LabelCompo9" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>-->
+               </Grid>
+            </Button>
+         </Grid>
+
+      </Grid>
+   </Grid>
+</UserControl>

DirectCuts/ControlsDirectCutUC1.xaml.vb

@@ -0,0 +1,142 @@
+Imports EgtUILib
+Public Class ControlsDirectCutUC1
+
+   ' Dichiarazione delle Page UserControl
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Friend m_Polishing As Polishing
+   Friend m_CopyTemplate As CopyTemplateUC
+   Friend m_SawTest As SawTestUC
+
+   ' Stato di visualizzazione della macchina
+   Friend m_bShowMachine As Boolean = False
+   Friend m_nMachLook As Integer = MCH_LOOK.ALL
+   ' Dati generali CN
+   Friend m_CN As CN_generico
+   Private m_bFirst As Boolean = True
+   ' Riferimento alla pagina correntemente attiva
+   Friend m_ActiveDirectCutPage As DirectCutPages = DirectCutPages.DirectCut
+   ' Variabili che indicano attivazione paginette con bottoni macchina
+   Private m_ControlsBtn_IsActive As Boolean
+
+   Public Shared m_dZSafe As Double = 52
+
+   ' Variabile che indica se sono attivi i bottoni macchina nuovi o vecchi
+   Friend m_NewMachineButtonsType As Boolean
+   ' Indica che la finestra del talio Singolo deve essere di tipo manuale
+   Friend m_bManulaCut As Boolean = False
+
+   Enum DirectCutPages
+      DirectCut
+      DirectCut1
+      Polishing
+      CopyTemplate
+      SawTest
+   End Enum
+
+   Private Sub ControlsDirectCutUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' leggo la configurazione del programma per i nuovi tagli manuali
+      m_bManulaCut = GetPrivateProfileInt(S_GENERAL, K_MANUAL_CUT, 0, m_MainWindow.GetIniFile()) <> 0
+
+      'Creazione delle Page UserControl
+      m_SawTest = New SawTestUC
+      m_Polishing = New Polishing
+      m_CopyTemplate = New CopyTemplateUC
+
+      'Posizionemento nella griglia delle Page UserControl
+      m_SawTest.SetValue(Grid.RowProperty, 1)
+      m_Polishing.SetValue(Grid.RowProperty, 1)
+      m_CopyTemplate.SetValue(Grid.RowProperty, 1)
+
+      ' assegno i nomi ai pulsanti
+      SawTestTxt.Text = EgtMsg(90207)
+      PolishingTxt.Text = EgtMsg(90231)
+      'CopyTemplateBtn.Content = EgtMsg(90209)
+      CopyTemplateTxt.Text = EgtMsg(90209)
+      'SquaringTxt.Text = "Squaring"
+
+   End Sub
+
+   Private Sub ControlsDirectCutUC1_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      ' Se rientro da simulazione
+      If m_ActiveDirectCutPage = DirectCutPages.SawTest Then
+         LeftButtonGrid.Children.Add(m_SawTest)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.CopyTemplate Then
+         Me.LeftButtonGrid.Children.Add(m_CopyTemplate)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.Polishing Then
+         Me.LeftButtonGrid.Children.Add(m_Polishing)
+         Return
+      End If
+
+      ' Caso standard
+      m_ActiveDirectCutPage = DirectCutPages.DirectCut1
+
+      ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
+      Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
+      Dim bH1Exists As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+
+      PolishingBtn.IsEnabled = (bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
+      SawTestBtn.IsEnabled = (bRawOk And bH1Exists)
+      CopyTemplateBtn.IsEnabled = bH1Exists
+
+      ' aggiorno la visualizzazione dei parametri
+      ReloadParam()
+
+      ' Nascondo i pezzi in parcheggio
+      HideParkedParts()
+      EgtZoom(ZM.ALL)
+
+   End Sub
+
+   ' ricarica i dati utensili
+   Public Sub ReloadParam()
+      Dim sCurrSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sCurrSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim bSaw As Boolean = False
+
+      ' se esiste una lavorazione di lama corrente vuol dire che deve essere preferita
+      If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
+         bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
+      End If
+      'm_SingleCut.SetEnableParam(bSaw)
+      'm_MultipleCut.SetEnableParam(bSaw)
+      'm_GridCut.SetEnableParam(bSaw)
+   End Sub
+
+#Region "COMMAND CLICK BTN"
+   Private Sub SawTestBtn_Click(sender As Object, e As RoutedEventArgs) Handles SawTestBtn.Click
+      LeftButtonGrid.Children.Add(m_SawTest)
+      m_ActiveDirectCutPage = DirectCutPages.SawTest
+   End Sub
+
+   Private Sub PolishingBtn_Click(sender As Object, e As RoutedEventArgs) Handles PolishingBtn.Click
+      LeftButtonGrid.Children.Add(m_Polishing)
+      m_ActiveDirectCutPage = DirectCutPages.Polishing
+   End Sub
+
+   Private Sub CopyTemplateBtn_Click(sender As Object, e As RoutedEventArgs) Handles CopyTemplateBtn.Click
+      LeftButtonGrid.Children.Add(m_CopyTemplate)
+      m_ActiveDirectCutPage = DirectCutPages.CopyTemplate
+   End Sub
+
+   Private Sub ChangeUC1Btn_Click(sender As Object, e As RoutedEventArgs) Handles ChangeUC1Btn.Click
+      DirectCutPage_Unloaded(Nothing, Nothing)
+      m_ActiveDirectCutPage = DirectCutPages.DirectCut1
+      m_MainWindow.m_DirectCutPageUC.LoadDirectCutUC()
+   End Sub
+
+#End Region    ' Command Click Btn
+
+   Friend Sub DirectCutPage_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      Select Case m_ActiveDirectCutPage
+         Case DirectCutPages.SawTest
+            LeftButtonGrid.Children.Remove(m_SawTest)
+         Case DirectCutPages.Polishing
+            LeftButtonGrid.Children.Remove(m_Polishing)
+         Case DirectCutPages.CopyTemplate
+            LeftButtonGrid.Children.Remove(m_CopyTemplate)
+      End Select
+   End Sub
+
+End Class

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -76,6 +76,11 @@ Public Class ControlsMachineButtonUC
       End If
    End Sub
 
+#Region "STATE CHANGED"
+   ' ------------------------------------------------------------------------------
+   ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
+   '-------------------------------------------------------------------------------
+
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim SpindleButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
@@ -255,38 +260,34 @@ Public Class ControlsMachineButtonUC
       Dim DoorOpenedButton As ThreeStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_DOORCLOSED Then
-            'If TypeOf MachineButton Is NoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, NoStateButton)
-            'ElseIf TypeOf MachineButton Is TwoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, TwoStateButton)
-            'ElseIf TypeOf MachineButton Is ThreeStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, ThreeStateButton)
-            'ElseIf TypeOf MachineButton Is DoubleCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, DoubleCommandButton)
-            'ElseIf TypeOf MachineButton Is PressedCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, PressedCommandButton)
-            'End If
             DoorClosedButton = MachineButton
          End If
-         If MachineButton.StateFlag = "DoorOpened" Then
+         If MachineButton.StateFlag = K_DOOROPENDED Then
             DoorOpenedButton = MachineButton
          End If
       Next
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorClosedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_Red")
             Case 1, 2
+               ' porta in movimento/aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
          End Select
       End If
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorOpenedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
             Case 1
+               ' porta in movimento 
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Yellow")
             Case 2
+               ' porta chiusa
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Green")
          End Select
       End If
@@ -330,6 +331,50 @@ Public Class ControlsMachineButtonUC
       End If
    End Sub
 
+   Friend Sub ParkingStateChanged(ParkingState As Boolean)
+      Dim ParkingButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = K_PARKING Then
+            ParkingButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(ParkingButton) Then
+         ParkingButton.SetIsChecked(ParkingState)
+      End If
+   End Sub
+
+   Friend Sub ZoneStateChanged(ZoneState As Integer)
+      'Dim sFlag As String = String.Empty
+      'If ZoneState = 1 Then
+      '   sFlag = BTN_ENABLE_ZONE_1
+      'ElseIf ZoneState = 2 Then
+      '   sFlag = BTN_ENABLE_ZONE_2
+      'End If
+      'Dim EnableZoneButton As TwoStateButton = Nothing
+      'For Each MachineButton As MachineButton In m_ButtonList
+      '   If MachineButton.StateFlag = K_ENABLEZONE Then
+      '      EnableZoneButton = MachineButton
+      '   End If
+      'Next
+      'If Not IsNothing(EnableZoneButton) Then
+      '   EnableZoneButton.SetIsChecked(EnableZone)
+      'End If
+   End Sub
+
+   Friend Sub PcStateChanged(EnablePC As Boolean)
+      'Dim EnablePCButton As TwoStateButton = Nothing
+      'For Each MachineButton As MachineButton In m_ButtonList
+      '   If MachineButton.StateFlag = K_ENABLEPC Then
+      '      EnablePCButton = MachineButton
+      '   End If
+      'Next
+      'If Not IsNothing(EnablePCButton) Then
+      '   EnablePCButton.SetIsChecked(EnablePC)
+      'End If
+   End Sub
+
+#End Region    ' State Range
+
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
                          ByVal lpKeyName As String,
@@ -402,6 +447,8 @@ Public MustInherit Class MachineButton
    Friend Const BTN_STATE_THREEAXIS As String = "ThreeAxis"
    Friend Const BTN_STATE_FIVEAXIS As String = "FiveAxis"
    Friend Const BTN_STATE_NOTHING As String = "Nothing"
+   Friend Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Friend Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
 
    ' Dichiarazione delle Page UserControl
    Friend Shared m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
@@ -475,7 +522,7 @@ Public MustInherit Class MachineButton
                If m_CN.m_NewVariable And m_MainWindow.m_CNCommunication.m_nNCType = 2 Then
                   ' solo per Flexium
                   m_CN.DPlcVariables_WriteVariables(ENumber, EValue)
-                  If Not IsNothing(ENumber2) And Not IsNothing(EValue2) Then
+                  If Not String.IsNullOrEmpty(ENumber2) And Not String.IsNullOrEmpty(EValue2) Then
                      m_CN.DPlcVariables_WriteVariables(ENumber2, EValue2)
                   End If
                   ' altrimenti scrittura delle variabili E
@@ -524,13 +571,64 @@ Public MustInherit Class MachineButton
                   EgtOutLog("dopo scrittura seconda variabile")
                End If
                Return
+            Case 4
+               ' ------------------------------------ FANUC ------------------------------------
+               ' eventuale scrittura di linea di comando MDI
+               If Not String.IsNullOrEmpty(CmdString) Then
+                  ' attivo mpdalità MDI
+                  m_CN.DGeneralFunctions_WriteCncMode(2)
+                  System.Threading.Thread.Sleep(100)
+                  ' salvo la stringa di comando ricevuta dal file lua
+                  m_CN.sz_ManualDataInput = CmdString
+                  ' esguo la funzione che ha il compito di scrivere il comando MDI
+                  m_CN.MDI_command()
+               End If
+               ' attivo modalità AUTO
+               m_CN.DGeneralFunctions_WriteCncMode(7)
+               System.Threading.Thread.Sleep(100)
+               If String.IsNullOrEmpty(EValue) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue As Boolean
+                     If EValue.Trim = "1" Then bEValue = True
+                     m_CN.NC_write_var_bit(ENumber, CBool(EValue))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber, CShort(EValue))
+                  End If
+                  EgtOutLog("Fanuc_DNumber= " & ENumber & " DValue= " & EValue)
+               End If
+               ' eventale caricamento seconda variabile
+               If String.IsNullOrEmpty(EValue2) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber2)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber2)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber2.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue2 As Boolean
+                     If EValue2.Trim = "1" Then bEValue2 = True
+                     m_CN.NC_write_var_bit(ENumber2, CBool(EValue2))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber2, CShort(EValue2))
+                  End If
+                  EgtOutLog("Fanuc_DNumber2= " & ENumber2 & " DValue2= " & EValue2)
+               End If
+               Return
          End Select
       End If
       '--------------------------------------------------------- MDI ---------------------------------------------------------
       Dim nResult As Short
       ' assegno la modalità di funzionamento
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
-         Case 1, 2
+         Case 1, 2, 4
             nResult = m_CN.DGeneralFunctions_WriteCncMode(2)     ' Modalità MDI per controlli num
          Case 3
             'Per il siemens non devo fare nulla
@@ -554,7 +652,7 @@ Public MustInherit Class MachineButton
          m_CN.DGeneralFunctions_CycleStart()
       End If
       System.Threading.Thread.Sleep(300)
-      ' riprostino la modalità manuale
+      ' ripristino la modalità manuale..?? siucuri ??
       nResult = m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
    End Sub
 
@@ -575,6 +673,7 @@ Public MustInherit Class MachineButton
          EgtTdbGetCurrToolParam(MCH_TP.FEED, dFeed)
       End If
       EgtLuaSetGlobNumVar("CMD.F", dFeed)
+
       Dim dSpeed As Double = 0
       If Not String.IsNullOrWhiteSpace(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text) Then
          StringToDouble(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text, dSpeed)
@@ -583,6 +682,18 @@ Public MustInherit Class MachineButton
          EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)
@@ -647,6 +758,7 @@ Public Class TwoStateButton
          Return m_IsChecked
       End Get
       Set(value As Boolean)
+         ' accendo il comando, anche se dovrei aspettare di leggere lo stato da PLC
          m_IsChecked = value
          If value Then
             ExecuteMDICommand(TLuaScriptName)
@@ -743,6 +855,7 @@ Public Class NoStateButton
             ExecuteMDICommand(TLuaScriptName)
          End If
       Else
+         ' FANUC, SIEMENS
          ExecuteMDICommand(TLuaScriptName)
       End If
    End Sub

DirectCuts/CopyTemplateUC.xaml

@@ -35,10 +35,11 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="Point1Btn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Acquisisci-PImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
 
-         </Grid>
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
             Margin="6,0,6,0">
@@ -55,10 +56,12 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="LineBtn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="ArcBtn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="LineBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource LineaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="ArcBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource ArcoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
 
          </Grid>
 
@@ -69,14 +72,18 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="RemoveBtn" Grid.Column="0" Grid.Row="3" Grid.RowSpan="2"
-            Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="CloseBtn" Grid.Column="1" Grid.Row="3" Grid.RowSpan="2"
-            Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+                <Button Name="RemoveBtn" Grid.Column="0" Grid.Row="3" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource Rimuovi-segmentoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <Button Name="CloseBtn" Grid.Column="1" Grid.Row="3" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource ChiudiImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
 
-         </Grid>
+            </Grid>
 
-            <Button Name="SaveBtn" Grid.Column="0" Grid.Row="10" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+            <Button Name="SaveBtn" Grid.Column="0" Grid.Row="10"  Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                <Image Source="{DynamicResource Salva-taglioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
             <Button Name="ExitBtn" Grid.Column="2" Grid.Row="10" Style="{DynamicResource OmagCut_YellowIconButton}">
                 <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>

DirectCuts/CopyTemplateUC.xaml.vb

@@ -5,6 +5,8 @@ Public Class CopyTemplateUC
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   Private m_refControlDirectCutUC As ControlsDirectCutUC1
+
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Array stringhe modalità di acquisizione dei punti
@@ -49,16 +51,17 @@ Public Class CopyTemplateUC
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
 
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      LineBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 50)
-      ArcBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 51)
-      RemoveBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 52)
-      CloseBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 53)
-      SaveBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 54)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      LineBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 50)
+      ArcBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 51)
+      RemoveBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 52)
+      CloseBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 53)
+      SaveBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 54)
    End Sub
 
    Private Sub CopyTemplate_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_refControlDirectCutUC = m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC1
       m_bActive = True
       SaveBtn.IsEnabled = False
       LineBtn.IsChecked = True
@@ -254,8 +257,7 @@ Public Class CopyTemplateUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
-      m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function EraseCopyTemplatePart() As Boolean

DirectCuts/DirectCutPageUC.xaml

@@ -28,10 +28,10 @@
             <ColumnDefinition Width="7*"/>
          </Grid.ColumnDefinitions>
 
-          <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+         <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
             <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
          </Button>
-            <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+         <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
             <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
          </Button>
 
@@ -42,25 +42,27 @@
 
       </Grid>
 
-         <!-- Definizione della Grid laterale -->
-      <Grid Name="LeftButtonGrid" Grid.Row="1" >
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="7*"/>
-         </Grid.RowDefinitions>
-
-         <!-- Definizione della Grid laterale -->
-         <Grid Name="CutTypeGrid" Grid.Row="1" >
+      <!-- Definizione della Grid laterale -->
+      <!--
+        <Grid Name="LeftButtonGrid" Grid.Row="1" >
             <Grid.RowDefinitions>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="7*"/>
+            </Grid.RowDefinitions>
+
+            -->
+      <!-- Definizione della Grid laterale -->
+      <!--<Grid Name="CutTypeGrid" Grid.Row="1" >
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
                 </Grid.RowDefinitions>
                 <Button Name="ManualBtn" Grid.Column="2" Grid.Row="0"                    
                         Style="{DynamicResource OmagCut_YellowIconButton}">
@@ -140,30 +142,65 @@
                                    Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
                     </Grid>
                 </Button>
-             
-            <Button Name="PolishingBtn" Grid.Row="6"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-            <Button Name="CopyTemplateBtn" Grid.Row="7"
-                    Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Grid>
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="80"/>
-                        <ColumnDefinition Width="140"/>
-                    </Grid.ColumnDefinitions>
-                    <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
-                    <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                <Button Name="PolishingBtn" Grid.Row="6"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="PolishingTxt" Grid.Column="1"
                                Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                </Grid>
-            </Button>
-             
-            <Button Name="SawTestBtn" Grid.Row="8"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                    </Grid>
+                </Button>
+
+                -->
+      <!--<Button Name="CopyTemplateBtn" Grid.Row="7"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>-->
+      <!--
+                <Button Name="SquaringBtn" Grid.Row="7"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SquaringTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="SawTestBtn" Grid.Row="8"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SawTestTxt" Grid.Column="1"
+                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+            </Grid>-->
+      <!--
+
+        </Grid>-->
 
-            </Grid>
-      
-      </Grid>
-      
       <!-- Definizione della Grid laterale per bottoni macchina -->
       <Grid Name="MachineButtonGrid" Grid.Row="1">
          <Grid.RowDefinitions>
@@ -180,9 +217,14 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="5*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <!--<ColumnDefinition Width="1*"/>-->
+            <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
 
          <ToggleButton Name="ControlsMachineBtn" Grid.Column="0"
@@ -194,27 +236,42 @@
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
             <Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
-          
-          <!--Comando asse X-Y-->
-          <ToggleButton Name="XYBtn" Grid.Column="2"
+
+         <!--Comando asse X-Y-->
+         <ToggleButton Name="XYBtn" Grid.Column="2"
+               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+            <Image Source="{DynamicResource XYJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
+
+         <!--Comando asse Z-C-->
+         <ToggleButton Name="ZCBtn" Grid.Column="3"   
+               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+            <Image Source="{DynamicResource ZCJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
+
+         <!--Comando asse Z-B-->
+         <ToggleButton Name="ZBBtn" Grid.Column="4"
+               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+            <Image Source="{DynamicResource ZBJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
+
+         <!--Comando Remote-->
+         <ToggleButton Name="RemoteBtn" Grid.Column="5"
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
             <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
          </ToggleButton>
+
+         <!--Parking-->
+         <ToggleButton Name="ParkingBtn" Grid.Column="6"
+              Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+            <Image Source="{DynamicResource ParkingImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
+          
           
-          <!--Comando asse Z-C-->
-          <ToggleButton Name="ZCBtn" Grid.Column="3"   
-               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-              <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
-          </ToggleButton>
 
-          <!--Comando asse Z-B-->
-          <ToggleButton Name="ZBBtn" Grid.Column="4"
-               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-              <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
-          </ToggleButton>
-
-            <Button Name="ManualModeBtn" Grid.Column="7"
-               Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+         <!--Comando Manula/MDI-->
+         <Button Name="ManualModeBtn" Grid.Column="11"
+                Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
             <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </Button>
 

DirectCuts/DirectCutPageUC.xaml.vb

@@ -7,18 +7,20 @@ Public Class DirectCutPageUC
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Friend m_MachineButtons As MachineButtonsUC
    Friend m_ManualAxesMove As ManualAxesMoveUC
-   Friend m_SingleCut As SingleCutUC
-   Friend m_SingleDrill As SingleDrillUC
-   ' nuova finestra per i comandi per il taglio manuale nuovo
-   Friend m_SingleCutAuto As SingleCutAuto
-   Friend m_MultipleCut As MultipleCut
-   Friend m_GridCut As GridCut
-   Friend m_FlatteningCut As FlatteningCut
-   Friend m_Polishing As Polishing
-   Friend m_CopyTemplate As CopyTemplateUC
-   Friend m_SawTest As SawTestUC
+
    Friend m_ControlsMachineButton As ControlsMachineButtonUC
    Friend m_VacuumMachineButton As VacuumMachineButtonUC
+   Friend m_ControlsDirectCutUC As ControlsDirectCutUC
+   Friend m_ControlsDirectCutUC1 As ControlsDirectCutUC1
+
+   Friend m_ActiveControl As Controls
+   Enum Controls
+      DirectCutUC
+      DirectCutUC1
+      MachineButtonUC
+      VacuumButtonUC
+   End Enum
+
 
    ' Stato di visualizzazione della macchina
    Friend m_bShowMachine As Boolean = False
@@ -26,8 +28,6 @@ Public Class DirectCutPageUC
    ' Dati generali CN
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
-   ' Riferimento alla pagina correntemente attiva
-   Friend m_ActiveDirectCutPage As DirectCutPages = DirectCutPages.DirectCut
    ' Variabili che indicano attivazione paginette con bottoni macchina
    Private m_ControlsBtn_IsActive As Boolean
 
@@ -41,108 +41,45 @@ Public Class DirectCutPageUC
    ' elenco dei nuovi bottoni
    Private m_ButtonJogList As New List(Of MachineButton)
 
-   Enum DirectCutPages
-      DirectCut
-      ManualAxesMove
-      SingleCut
-      MultipleCut
-      GridCut
-      FlatteningCut
-      Polishing
-      CopyTemplate
-      SawTest
-      SingleCutAuto
-      SingleDrill
-   End Enum
 
    Private Sub DirectCutPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
-      ' leggo la configurazione del programma per i nuovi tagli manuali
-      m_bManulaCut = GetPrivateProfileInt(S_GENERAL, K_MANUAL_CUT, 0, m_MainWindow.GetIniFile()) <> 0
-
       'Creazione delle Page UserControl
       m_MachineButtons = New MachineButtonsUC
       m_ManualAxesMove = New ManualAxesMoveUC
-      m_SingleCut = New SingleCutUC
-      m_SingleDrill = New SingleDrillUC
-      m_MultipleCut = New MultipleCut
-      m_GridCut = New GridCut
-      m_FlatteningCut = New FlatteningCut
-      m_Polishing = New Polishing
-      m_CopyTemplate = New CopyTemplateUC
-      m_SawTest = New SawTestUC
       m_ControlsMachineButton = New ControlsMachineButtonUC
       m_VacuumMachineButton = New VacuumMachineButtonUC
-      ' Costruisco la finestra per il nuovo tipo di taglio manuale
-      m_SingleCutAuto = New SingleCutAuto
+      m_ControlsDirectCutUC = New ControlsDirectCutUC
+      m_ControlsDirectCutUC1 = New ControlsDirectCutUC1
 
       'Posizionemento nella griglia delle Page UserControl
       m_MachineButtons.SetValue(Grid.RowProperty, 2)
-      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 6)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, m_MachineButtons.nCountButton)
       m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
-      If m_bManulaCut Then
-         m_SingleCutAuto.SetValue(Grid.RowProperty, 1)
-      Else
-         m_SingleCut.SetValue(Grid.RowProperty, 1)
-      End If
-      m_SingleDrill.SetValue(Grid.RowProperty, 1)
-      m_MultipleCut.SetValue(Grid.RowProperty, 1)
-      m_GridCut.SetValue(Grid.RowProperty, 1)
-      m_FlatteningCut.SetValue(Grid.RowProperty, 1)
-      m_Polishing.SetValue(Grid.RowProperty, 1)
-      m_CopyTemplate.SetValue(Grid.RowProperty, 1)
-      m_SawTest.SetValue(Grid.RowProperty, 1)
+
+      m_ControlsDirectCutUC.SetValue(Grid.RowProperty, 1)
+      m_ControlsDirectCutUC1.SetValue(Grid.RowProperty, 1)
       m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
       m_VacuumMachineButton.SetValue(Grid.RowProperty, 1)
 
-      Dim bCollapsedNewBottonsConsole As Boolean = False
+      ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [ControlMachButtons])
+      Dim bCollapsedNewBottonsConsole As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons("JogButtons", "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
+      ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [VacuumMachButtons])
+      Dim bCollapsedVacuumButton As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_VACUUMMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       If Not m_NewMachineButtonsType Then
          'Assegno MachineButtons alla pagina
          LowerButtonGrid.Children.Add(m_MachineButtons)
          ControlsMachineBtn.Visibility = Windows.Visibility.Collapsed
          VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
-         ' per le configurazioni diverse dalla Digitale5
-         bCollapsedNewBottonsConsole = True
       End If
-
-      If GetPrivateProfileInt(S_NUMERICALCONTROL, K_TYPE, 0, m_MainWindow.GetMachIniFile()) = 0 Then
-         ManualBtn.IsEnabled = False
-         ManualModeBtn.Visibility = Windows.Visibility.Hidden
+      ' se non sono configurate le ventose allora nascondo il comando
+      If m_NewMachineButtonsType AndAlso bCollapsedVacuumButton Then
+         VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
       End If
 
-      ' ManualBtn.Content = EgtMsg(90201)
-      ManualTxt.Text = EgtMsg(90201)
-      'SingleCutBtn.Content = EgtMsg(90202)
-      SingleCutTxt.Text = EgtMsg(90202)
-      'SingleDrillBtn.Content = "Foro singolo"
-      SingleDrillTxt.Text = EgtMsg(90258)
-      'MultipleCutBtn.Content = EgtMsg(90203)
-      MultipleCutTxt.Text = EgtMsg(90203)
-      'GridCutBtn.Content = EgtMsg(90204)
-      GridCutTxt.Text = EgtMsg(90204)
-      'FlatteningCutBtn.Content = EgtMsg(90206)
-      FlatteningCutTxt.Text = EgtMsg(90206)
-      PolishingBtn.Content = EgtMsg(90231)
-      'CopyTemplateBtn.Content = EgtMsg(90209)
-      CopyTemplateTxt.Text = EgtMsg(90209)
-      SawTestBtn.Content = EgtMsg(90207)
-
-
       ' nuovi bottoni 20/05/2021 - modifica specifiche 04/08/2021
+      ' leggo il numero di assi attivi nella macchina
       Dim AxesNumber = GetPrivateProfileInt(S_AXES, K_AXESNUM, 5, m_MainWindow.GetMachIniFile())
-      Dim x As Integer = GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile())
-      If GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile()) = 1 And Not bCollapsedNewBottonsConsole Then
-         XYBtn.Content = "X - Y"
-         ZCBtn.Content = "Z - C"
-         If AxesNumber < 5 Then
-            ZBBtn.Visibility = Windows.Visibility.Collapsed
-         End If
-         ZBBtn.Content = "Z - B"
-      Else
-         XYBtn.Visibility = Windows.Visibility.Collapsed
-         ZCBtn.Visibility = Windows.Visibility.Collapsed
-         ZBBtn.Visibility = Windows.Visibility.Collapsed
-      End If
 
    End Sub
 
@@ -182,55 +119,17 @@ Public Class DirectCutPageUC
             End If
          End If
       End While
+      ' attivo la visualizzazione dei comandi
+      SetVisibilityJogButtuns()
       ' lo stato di questi comandi vieni carico dalla lettura del PLC (refresh)
       '----------- FINE NUOVI BOTTONI------------
 
-      ' Se rientro da simulazione
-      If m_ActiveDirectCutPage = DirectCutPages.SingleCut Then
-         LeftButtonGrid.Children.Add(m_SingleCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto Then
-         LeftButtonGrid.Children.Add(m_SingleCutAuto)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.MultipleCut Then
-         LeftButtonGrid.Children.Add(m_MultipleCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.GridCut Then
-         LeftButtonGrid.Children.Add(m_GridCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.FlatteningCut Then
-         LeftButtonGrid.Children.Add(m_FlatteningCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.Polishing Then
-         LeftButtonGrid.Children.Add(m_Polishing)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.SawTest Then
-         LeftButtonGrid.Children.Add(m_SawTest)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleDrill Then
-         LeftButtonGrid.Children.Add(m_SingleDrill)
-         Return
-      End If
-
-      ' Caso standard
-      m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      LoadLastDirectCutControls()
 
       ' Se macchina fotografica abilitata
       PhotoBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO)
-
-      ' Attivo le lavorazioni solo se esiste il grezzo
-      Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
-      If m_bManulaCut Then
-         ' anche se non è presente un grezzo mantengo abilitato il bottone
-         SingleCutBtn.IsEnabled = True
-      Else
-         SingleCutBtn.IsEnabled = bRawOk
-      End If
-      MultipleCutBtn.IsEnabled = bRawOk
-      GridCutBtn.IsEnabled = bRawOk
-      FlatteningCutBtn.IsEnabled = bRawOk
-      PolishingBtn.IsEnabled = (bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
-      SawTestBtn.IsEnabled = bRawOk
+      ' aggiorno la visualizzazione dei parametri
+      ReloadParam()
 
       ' Nascondo i pezzi in parcheggio
       HideParkedParts()
@@ -238,6 +137,54 @@ Public Class DirectCutPageUC
 
    End Sub
 
+   Public Sub ReloadParam()
+      Dim sCurrSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sCurrSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim bSaw As Boolean = False
+
+      ' se esiste una lavorazione di lama corrente vuol dire che deve essere preferita
+      If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
+         bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
+      End If
+      m_ControlsDirectCutUC.m_SingleCut.SetEnableParam(bSaw)
+      m_ControlsDirectCutUC.m_MultipleCut.SetEnableParam(bSaw)
+      m_ControlsDirectCutUC.m_GridCut.SetEnableParam(bSaw)
+   End Sub
+
+   Private Sub SetVisibilityJogButtuns()
+      XYBtn.Visibility = Visibility.Collapsed
+      ZCBtn.Visibility = Visibility.Collapsed
+      ZBBtn.Visibility = Visibility.Collapsed
+      RemoteBtn.Visibility = Visibility.Collapsed
+      ParkingBtn.Visibility = Visibility.Collapsed
+
+      Dim Item As MachineButton = Nothing
+      For Each Item In m_ButtonJogList
+         Select Case Item.StateFlag.Trim
+            Case K_XYJOG
+               XYBtn.Visibility = Visibility.Visible
+               XYBtn.Foreground = Brushes.White
+               XYBtn.ToolTip = "X - Y"
+            Case K_ZCJOG
+               ZCBtn.Visibility = Visibility.Visible
+               ZCBtn.Foreground = Brushes.White
+               ZCBtn.ToolTip = "Z - C"
+            Case K_ZBJOG
+               ZBBtn.Visibility = Visibility.Visible
+               ZBBtn.Foreground = Brushes.White
+               ZBBtn.ToolTip = "Z - B"
+            Case K_REMOTE
+               RemoteBtn.Visibility = Visibility.Visible
+               RemoteBtn.Foreground = Brushes.White
+               RemoteBtn.Content = "Remote"
+            Case K_PARKING
+               ParkingBtn.Visibility = Visibility.Visible
+               ParkingBtn.Foreground = Brushes.White
+               ParkingBtn.ToolTip = "Parking"
+         End Select
+      Next
+   End Sub
+
    Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Se macchina fotografica collegata, faccio una foto
@@ -262,63 +209,13 @@ Public Class DirectCutPageUC
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
    End Sub
 
-   Private Sub ManualBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualBtn.Click
-      LeftButtonGrid.Children.Add(m_ManualAxesMove)
-      m_ActiveDirectCutPage = DirectCutPages.ManualAxesMove
-   End Sub
-
-   Private Sub SingleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleCutBtn.Click
-      If m_bManulaCut Then
-         LeftButtonGrid.Children.Add(m_SingleCutAuto)
-         m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto
-      Else
-         LeftButtonGrid.Children.Add(m_SingleCut)
-         m_ActiveDirectCutPage = DirectCutPages.SingleCut
-      End If
-
-   End Sub
-
-   Private Sub MultipleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles MultipleCutBtn.Click
-      LeftButtonGrid.Children.Add(m_MultipleCut)
-      m_ActiveDirectCutPage = DirectCutPages.MultipleCut
-   End Sub
-
-   Private Sub GridCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles GridCutBtn.Click
-      LeftButtonGrid.Children.Add(m_GridCut)
-      m_ActiveDirectCutPage = DirectCutPages.GridCut
-   End Sub
-
-   Private Sub FlatteningCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles FlatteningCutBtn.Click
-      LeftButtonGrid.Children.Add(m_FlatteningCut)
-      m_ActiveDirectCutPage = DirectCutPages.FlatteningCut
-   End Sub
-
-   Private Sub PolishingBtn_Click(sender As Object, e As RoutedEventArgs) Handles PolishingBtn.Click
-      LeftButtonGrid.Children.Add(m_Polishing)
-      m_ActiveDirectCutPage = DirectCutPages.Polishing
-   End Sub
-
-   Private Sub CopyTemplateBtn_Click(sender As Object, e As RoutedEventArgs) Handles CopyTemplateBtn.Click
-      LeftButtonGrid.Children.Add(m_CopyTemplate)
-      m_ActiveDirectCutPage = DirectCutPages.CopyTemplate
-   End Sub
-
-   Private Sub SawTestBtn_Click(sender As Object, e As RoutedEventArgs) Handles SawTestBtn.Click
-      LeftButtonGrid.Children.Add(m_SawTest)
-      m_ActiveDirectCutPage = DirectCutPages.SawTest
-   End Sub
-
-   Private Sub SingleDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleDrillBtn.Click
-      LeftButtonGrid.Children.Add(m_SingleDrill)
-      m_ActiveDirectCutPage = DirectCutPages.SingleDrill
-   End Sub
-
    Private Sub ControlsMachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles ControlsMachineBtn.Click
       If ControlsMachineBtn.IsChecked Then
          m_ControlsMachineButton = New ControlsMachineButtonUC
          m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
          m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
          MachineButtonGrid.Children.Add(m_ControlsMachineButton)
+         m_ActiveControl = Controls.MachineButtonUC
          If VacuumMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
             VacuumMachineBtn.IsChecked = False
@@ -331,6 +228,7 @@ Public Class DirectCutPageUC
    Private Sub VacuumMachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles VacuumMachineBtn.Click
       If VacuumMachineBtn.IsChecked Then
          MachineButtonGrid.Children.Add(m_VacuumMachineButton)
+         m_ActiveControl = Controls.VacuumButtonUC
          If ControlsMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
             ControlsMachineBtn.IsChecked = False
@@ -340,9 +238,32 @@ Public Class DirectCutPageUC
       End If
    End Sub
 
-   '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
+   Friend Sub LoadDirectCutUC()
+      ManageControls()
+      m_ActiveControl = Controls.DirectCutUC
+      MachineButtonGrid.Children.Add(m_ControlsDirectCutUC)
+   End Sub
+
+   Friend Sub LoadDirectCutUC1()
+      ManageControls()
+      m_ActiveControl = Controls.DirectCutUC1
+      MachineButtonGrid.Children.Add(m_ControlsDirectCutUC1)
+   End Sub
+
+
+#Region "[JogButtons]"
+
    Private Sub XYBtn_Click(sender As Object, e As RoutedEventArgs) Handles XYBtn.Click
-      Dim XYJogButton As MachineButton = m_ButtonJogList(0)
+      ' riverco in elenco il bottone XYJog
+      Dim XYJogButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_XYJOG Then
+            XYJogButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(XYJogButton) Then Return
       ' eseguo lo script lua associato
       XYJogButton.ExecuteMDICommand(XYJogButton.TLuaScriptName)
       ' che comunica al PLC di cambiare lo stato, la modifica dello stato è intercettata dalla funzione Refresh che avvia il metodo Changed
@@ -365,7 +286,16 @@ Public Class DirectCutPageUC
    End Sub
 
    Private Sub ZCBtn_Click(sender As Object, e As RoutedEventArgs) Handles ZCBtn.Click
-      Dim ZJogButton As MachineButton = m_ButtonJogList(1)
+      ' riverco in elenco il bottone ZCYJog
+      Dim ZJogButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_ZCJOG Then
+            ZJogButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(ZJogButton) Then Return
       ' eseguo lo script lua associato
       ZJogButton.ExecuteMDICommand(ZJogButton.TLuaScriptName)
    End Sub
@@ -386,9 +316,18 @@ Public Class DirectCutPageUC
    End Sub
 
    Private Sub ZBBtn_Click(sender As Object, e As RoutedEventArgs) Handles ZBBtn.Click
-      Dim BCJogButton As MachineButton = m_ButtonJogList(2)
+      ' riverco in elenco il bottone ZCYJog
+      Dim ZBJogButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_ZBJOG Then
+            ZBJogButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(ZBJogButton) Then Return
       ' eseguo lo script lua associato
-      BCJogButton.ExecuteMDICommand(BCJogButton.TLuaScriptName)
+      ZBJogButton.ExecuteMDICommand(ZBJogButton.TLuaScriptName)
    End Sub
 
    Friend Sub ZBJogChanged(bBCAxes As Boolean)
@@ -405,17 +344,95 @@ Public Class DirectCutPageUC
          ZBBtn.IsChecked = bBCAxes
       End If
    End Sub
-   '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
+
+   Private Sub RemoteBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemoteBtn.Click
+      Dim RemoteButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_REMOTE Then
+            RemoteButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(RemoteButton) Then Return
+      ' eseguo lo script lua associato
+      Dim CurrentBtn As Primitives.ToggleButton = e.Source
+      Dim sLuaFileName As String = String.Empty
+      ' verifico lo stato del bottone per avviare il giusto script
+      If CurrentBtn.IsChecked() Then
+         sLuaFileName = RemoteButton.TLuaScriptName
+      Else
+         sLuaFileName = RemoteButton.FLuaScriptName
+      End If
+      RemoteButton.ExecuteMDICommand(sLuaFileName)
+   End Sub
+
+   Friend Sub RemoteChanged(bRemote As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim RemoteButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonJogList
+         If MachineButton.StateFlag.Trim = K_REMOTE Then
+            RemoteButton = MachineButton
+            Exit For
+         End If
+      Next
+      If Not IsNothing(RemoteButton) Then
+         RemoteButton.SetIsChecked(bRemote)
+         RemoteBtn.IsChecked = bRemote
+      End If
+   End Sub
+
+   Private Sub ParkingBtn_Click(sender As Object, e As RoutedEventArgs) Handles ParkingBtn.Click
+      Dim ParkingButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_PARKING Then
+            ParkingButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(ParkingButton) Then Return
+      ' eseguo lo script lua associato
+      Dim CurrentBtn As Primitives.ToggleButton = e.Source
+      Dim sLuaFileName As String = String.Empty
+      ' verifico lo stato del bottone per avviare il giusto script
+      If CurrentBtn.IsChecked() Then
+         sLuaFileName = ParkingButton.TLuaScriptName
+      Else
+         sLuaFileName = ParkingButton.FLuaScriptName
+      End If
+      ParkingButton.ExecuteMDICommand(sLuaFileName)
+   End Sub
+
+   Friend Sub ParkingStateChanged(bParkingState As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim ParkingButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonJogList
+         If MachineButton.StateFlag.Trim = K_PARKING Then
+            ParkingButton = MachineButton
+            Exit For
+         End If
+      Next
+      If Not IsNothing(ParkingButton) Then
+         ParkingButton.SetIsChecked(bParkingState)
+         ParkingButton.IsChecked = bParkingState
+      End If
+   End Sub
+
+#End Region    '[JogButtons]
+
    Private Sub MachViewModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachViewModeBtn.Click
       If m_bShowMachine Then
          ' aggiorno lo stato
          Select Case m_nMachLook
-         Case MCH_LOOK.ALL
-            m_nMachLook = MCH_LOOK.TAB_HEAD
-         Case MCH_LOOK.TAB_HEAD
-            m_nMachLook = MCH_LOOK.TAB_TOOL
-         Case Else
-            m_nMachLook = MCH_LOOK.ALL
+            Case MCH_LOOK.ALL
+               m_nMachLook = MCH_LOOK.TAB_HEAD
+            Case MCH_LOOK.TAB_HEAD
+               m_nMachLook = MCH_LOOK.TAB_TOOL
+            Case MCH_LOOK.TAB_TOOL
+               m_nMachLook = MCH_LOOK.TAB
+            Case Else
+               m_nMachLook = MCH_LOOK.ALL
          End Select
          ' aggiorno lo stato della macchina e la sua visualizzazione
          EgtSetMachineLook(m_nMachLook)
@@ -424,36 +441,40 @@ Public Class DirectCutPageUC
    End Sub
 
    Friend Sub DirectCutPage_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
-      Select Case m_ActiveDirectCutPage
-         Case DirectCutPages.DirectCut Or DirectCutPages.ManualAxesMove
-            ' Non è necessario fare alcunché
-         Case DirectCutPages.SingleCut
-            LeftButtonGrid.Children.Remove(m_SingleCut)
-         Case DirectCutPages.SingleCutAuto
-            LeftButtonGrid.Children.Remove(m_SingleCutAuto)
-         Case DirectCutPages.MultipleCut
-            LeftButtonGrid.Children.Remove(m_MultipleCut)
-         Case DirectCutPages.GridCut
-            LeftButtonGrid.Children.Remove(m_GridCut)
-         Case DirectCutPages.FlatteningCut
-            LeftButtonGrid.Children.Remove(m_FlatteningCut)
-         Case DirectCutPages.Polishing
-            LeftButtonGrid.Children.Remove(m_Polishing)
-         Case DirectCutPages.CopyTemplate
-            LeftButtonGrid.Children.Remove(m_CopyTemplate)
-         Case DirectCutPages.SawTest
-            LeftButtonGrid.Children.Remove(m_SawTest)
-         Case DirectCutPages.SingleDrill
-            LeftButtonGrid.Children.Remove(m_SingleDrill)
+      ManageControls()
+   End Sub
+
+   Friend Sub ManageControls()
+      Select Case m_ActiveControl
+         Case Controls.DirectCutUC
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            m_ControlsDirectCutUC.DirectCutPage_Unloaded(Nothing, Nothing)
+         Case Controls.DirectCutUC1
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC1)
+            m_ControlsDirectCutUC1.DirectCutPage_Unloaded(Nothing, Nothing)
+         Case Controls.MachineButtonUC
+            MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC1)
+            ControlsMachineBtn.IsChecked = False
+         Case Controls.VacuumButtonUC
+            MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
+            VacuumMachineBtn.IsChecked = False
+      End Select
+   End Sub
+
+   Friend Sub LoadLastDirectCutControls()
+      Select Case m_ActiveControl
+         Case Controls.DirectCutUC
+            MachineButtonGrid.Children.Add(m_ControlsDirectCutUC)
+         Case Controls.DirectCutUC1
+            MachineButtonGrid.Children.Add(m_ControlsDirectCutUC1)
+         Case Else
+            m_ActiveControl = Controls.DirectCutUC
+            MachineButtonGrid.Children.Add(m_ControlsDirectCutUC)
       End Select
-      If ControlsMachineBtn.IsChecked Then
-         MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
-         ControlsMachineBtn.IsChecked = False
-      End If
-      If VacuumMachineBtn.IsChecked Then
-         MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
-         VacuumMachineBtn.IsChecked = False
-      End If
    End Sub
 
    Private Sub ManualModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualModeBtn.Click
@@ -462,124 +483,4 @@ Public Class DirectCutPageUC
 
    End Sub
 
-   '' ------------------------ GESTIONE SECONDA PAGINA ------------------------
-   'Private Sub ClearButton(nCount As Integer)
-   '   Dim nEndIndex As Integer
-   '   If m_bIsFirstPage Then
-   '      nEndIndex = If(nCount < 8, nCount, 8)
-   '   Else
-   '      nEndIndex = If(nCount < 16, nCount - 8, 8)
-   '   End If
-   '   For index As Integer = 1 To nEndIndex
-   '      GetLabel(index).Text = String.Empty
-   '      GetImage(index).Source = Nothing
-   '      GetButton(index).Visibility = Windows.Visibility.Visible
-   '   Next
-   '   For index As Integer = nEndIndex + 1 To 8
-   '      GetLabel(index).Text = String.Empty
-   '      GetImage(index).Source = Nothing
-   '      GetButton(index).Visibility = Windows.Visibility.Hidden
-   '   Next
-   'End Sub
-
-   'Private Sub LoadPage()
-   '   Dim nDeltaSecondPage As Integer = 8
-   '   ' Leggo numero di componenti presenti
-   '   Dim nCompoNumber As Integer = GetPrivateProfileInt("Compo", "Count", 0, m_MainWindow.GetIniFile())
-   '   ' Calcolo indici a seconda della pagina in cui sono
-   '   If m_bIsFirstPage Then
-   '      ClearButton(nCompoNumber)
-   '      nDeltaSecondPage = 0
-   '   Else
-   '      ClearButton(nCompoNumber)
-   '      nDeltaSecondPage = 8
-   '   End If
-
-   '   ' Creazione converter da String a ImageSource
-   '   Dim ImageConverter As New ImageSourceConverter
-   '   Dim ThicknessConverter As New ThicknessConverter
-
-   '   'Assegnazione immagine e testo ai Button
-   '   For index As Integer = 1 To 8
-   '      Dim CustomThickness As New Thickness(0)
-   '      Dim nCompoName As Integer = GetPrivateProfileInt("Compo" & index + nDeltaSecondPage, "Name", 0, m_MainWindow.GetIniFile())
-   '      Dim sCompoImage As String = ""
-   '      Dim sCompoImageSource As ImageSource
-
-   '      'verifico presenza immagine e la aggiungo
-   '      If GetPrivateProfileString("Compo" & index + nDeltaSecondPage, "Image", "", sCompoImage, m_MainWindow.GetIniFile()) <> 0 Then
-   '         Try
-   '            sCompoImageSource = ImageConverter.ConvertFromString(m_MainWindow.GetResourcesDir() & "\" & sCompoImage)
-   '            GetImage(index).Height = 65
-   '            GetImage(index).Width = 65
-   '            GetImage(index).Source = sCompoImageSource
-   '         Catch ex As Exception
-   '            EgtOutLog("Error loading image " & sCompoImage)
-   '            sCompoImage = String.Empty
-   '            GetImage(index).Height = 0
-   '            GetImage(index).Width = 0
-   '            CustomThickness.Right = 0
-   '            GetImage(index).Margin = CustomThickness
-   '         End Try
-   '      Else
-   '         'Se non c'è l'immagine azzero la distanza tra testo e immagine
-   '         CustomThickness.Right = 0
-   '         GetImage(index).Margin = CustomThickness
-   '      End If
-
-   '      'verifico presenza testo
-   '      If nCompoName > 0 Then
-   '         Dim sCompoName As String = EgtMsg(MSG_COMPONENTPAGEUC + nCompoName)
-   '         'verifico presenza immagine
-   '         If sCompoImage.Length > 0 Then
-   '            'se la lunghezza del testo è maggiore di 15 lo taglio
-   '            If sCompoName.Length > 15 Then
-   '               sCompoName = sCompoName.Substring(0, 15)
-   '            End If
-   '            GetLabel(index).Text = sCompoName
-   '            'Se ci sono sia testo che immagine imposto un margine di 10
-   '            CustomThickness.Right = 10
-   '            GetImage(index).Margin = CustomThickness
-   '         Else
-   '            'se l'immagine non c'è e il testo è maggiore di 20 lo taglio
-   '            If sCompoName.Length > 20 Then
-   '               sCompoName = sCompoName.Substring(0, 20)
-   '            End If
-   '            GetLabel(index).Text = sCompoName
-   '         End If
-   '      Else
-   '         'Se non c'è testo azzero la distanza tra testo e immagine
-   '         CustomThickness.Right = 0
-   '         GetImage(index).Margin = CustomThickness
-   '      End If
-
-   '   Next
-
-   'End Sub
-
-   '' Gestione bottone altri componenti
-   'Private Sub Compo9_Click(sender As Object, e As RoutedEventArgs) Handles Compo9.Click
-   '   If m_bIsFirstPage Then
-   '      m_bIsFirstPage = False
-   '      LoadPage()
-   '      'Compo9.SetValue(Grid.ColumnProperty, 1)
-   '      'Compo9.SetValue(Grid.ColumnSpanProperty, 1)
-   '      'ImageCompo9.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NumericKeyboardArrow.png", UriKind.Relative))
-   '      'ImageCompo9.Visibility = Windows.Visibility.Visible
-   '      'LabelCompo9.Visibility = Windows.Visibility.Hidden
-   '      Compo9.SetValue(Grid.ColumnProperty, 0)
-   '      Compo9.SetValue(Grid.ColumnSpanProperty, 2)
-   '      ImageCompo9.Visibility = Windows.Visibility.Hidden
-   '      LabelCompo9.Visibility = Windows.Visibility.Visible
-   '   Else
-   '      m_bIsFirstPage = True
-   '      LoadPage()
-   '      Compo9.SetValue(Grid.ColumnProperty, 0)
-   '      Compo9.SetValue(Grid.ColumnSpanProperty, 2)
-   '      ImageCompo9.Visibility = Windows.Visibility.Hidden
-   '      LabelCompo9.Visibility = Windows.Visibility.Visible
-   '   End If
-   'End Sub
-
-
 End Class

DirectCuts/FlatteningCut.xaml

@@ -38,12 +38,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="Point1Btn" Grid.Column="0"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
 
-         </Grid>
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
             <ComboBox.ItemTemplate>
@@ -60,7 +65,7 @@
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"
@@ -125,12 +130,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </Grid>
 

DirectCuts/FlatteningCut.xaml.vb

@@ -66,6 +66,7 @@ Public Class FlatteningCut
       Right
    End Enum
 
+   ' Per abilitare la spianatura con la FRESA deve essere imposatato a TRUE il flag "Usa Fresa" nella pagina MACCHINA (campo INCISIONI)
    Private Sub FlatteningCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
       m_PointsModeArray(PT_MODE.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
@@ -79,8 +80,8 @@ Public Class FlatteningCut
       ' la associo alla combobox
       TypeCmBx.ItemsSource = m_TypeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
@@ -89,8 +90,8 @@ Public Class FlatteningCut
       ZReleasedTxBl.Text = "Z Svincolo"
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
       RotLockTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 29)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
       m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
       m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
@@ -185,11 +186,14 @@ Public Class FlatteningCut
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If( m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString( m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      ' imposto la Z di sicurezza corretta
+      EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
+      EgtMdbSave()
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -444,8 +448,8 @@ Public Class FlatteningCut
       StringToLen(WidthTxBx.Text, dWidth)
       ' Recupero lo spessore della lama corrente
       EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw)
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      Dim dThick As Double = GetFootPrintTool()
+      'EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       ' La larghezza della spianatura nono può essere inferiore allo spessore della lama
       m_dWid = Math.Max(dWidth, dThick)
       WidthTxBx.Text = LenToString(m_dWid, 2)
@@ -472,8 +476,8 @@ Public Class FlatteningCut
 
    Private Sub OverlapTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OverlapTxBx.EgtClosed
       ' Recupero spessore della lama correntemente attiva
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      Dim dThick As Double = GetFootPrintTool()
+      'EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       '  Verifico che la sovrapposizione non sia superiore allo spessore della lama (meno 1mm di offset)
       Dim dOverlap As Double = 0
       Const MIN_OFFSET As Double = 1.0
@@ -567,6 +571,7 @@ Public Class FlatteningCut
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -609,9 +614,28 @@ Public Class FlatteningCut
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
       EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
       EgtMdbSave()
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
+   ' ricavo l'ingombro di lavorazione in funzione dell'utensile selezionato
+   Private Function GetFootPrintTool() As Double
+      ' vedere nella pagina Allarm il capito "Incisioni"
+      Dim bForceUseMill As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0)
+      Dim dFootPrint As Double = 0
+      ' verifico quale lavorazione è attiva
+      If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) AndAlso Not bForceUseMill Then
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, dFootPrint)
+      ElseIf Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrMilling) Then
+         Dim sCurrMill = m_MainWindow.m_CurrentMachine.sCurrMill
+         'GetDrillFromDrilling(sCurrMill, m_MainWindow.m_CurrentMachine.sCurrMilling)
+         GetMillFromMilling(sCurrMill, m_MainWindow.m_CurrentMachine.sCurrMilling)
+         ' recupero informazioni della fresa in uso
+         EgtTdbSetCurrTool(sCurrMill)
+         EgtTdbGetCurrToolParam(MCH_TP.DIAM, dFootPrint)
+      End If
+      Return dFootPrint
+   End Function
+
    Private Function CreateFlatteningCut() As Boolean
       ' Verifico sia definito il punto iniziale e il grezzo
       If Not m_bPointP1Ok Or Not m_bRawOk Then
@@ -628,13 +652,17 @@ Public Class FlatteningCut
       Dim nPartId = EgtCreateGroup(GDB_ID.ROOT)
       EgtSetName(nPartId, NAME_DIRECTCUT)
       Dim nLayerId = EgtCreateGroup(nPartId)
-      EgtSetName(nLayerId, NAME_OUTLOOP)
+      ' EgtSetName(nLayerId, NAME_OUTLOOP)
+      EgtSetName(nLayerId, NAME_ONPATH)
       ' Creo il taglio
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
+      If (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0) Then
+         EgtSetInfo(nCutId, INFO_WIDTH, GetFootPrintTool)
+      End If
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, 0)
       ' Imposto prima direzione
       EgtSetInfo(nCutId, INFO_DIR, 1)
@@ -670,22 +698,21 @@ Public Class FlatteningCut
          RemoveFinalHome()
       End If
       UpdateSimulOkBtn()
-
-
-
       Return m_bCutOk
    End Function
 
    Private Function MultiplyCut(nLayerId As Integer, nCutId As Integer) As Boolean
-      ' Recupero spessore della lama correntemente attiva
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      ' Recupero spessore della lama (utensile) correntemente attiva
+      Dim dThick As Double = GetFootPrintTool()
+      If dThick = 0 Then Return False
+
       ' Imposto angolo di rotazione a seconda del lato dei tagli
       Dim dRotAngO As Double = If(SideChBx.IsChecked(), -90, 90)
       ' Definisco vettore di spostamento
       Dim vtDelta As Vector3d
       vtDelta = Vector3d.FromPolar(1, m_dAngO)
       vtDelta.Rotate(Vector3d.Z_AX, dRotAngO)
+
       ' Calcolo numero di iterazioni necessarie a coprire l'area impostata e lunghezza vettore delta
       Dim nStepNum As Integer
       Dim dDelta As Double

DirectCuts/GridCut.xaml

@@ -34,12 +34,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="Point1Btn" Grid.Column="0"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
 
-         </Grid>
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
             Margin="6,0,6,0">
@@ -57,12 +61,12 @@
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <Grid Grid.Row="5" Grid.ColumnSpan="2">
@@ -85,7 +89,7 @@
             <TextBlock Name="DimPzXTxBl" Grid.Column="2" Grid.Row="0"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
 
-            <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75"
+            <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             <EgtWPFLib:EgtTextBox Name="DimPzXTxBx" Grid.Column="2" Grid.Row="1" Width="75"
             Style="{StaticResource OmagCut_CalculatorTextBox}" />
@@ -95,7 +99,7 @@
             <TextBlock Name="DimPzYTxBl" Grid.Column="2" Grid.Row="2"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
 
-            <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75"
+            <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             <EgtWPFLib:EgtTextBox Name="DimPzYTxBx" Grid.Column="2" Grid.Row="3" Width="75"
             Style="{StaticResource OmagCut_CalculatorTextBox}" />
@@ -131,12 +135,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </Grid>
 

DirectCuts/GridCut.xaml.vb

@@ -63,8 +63,8 @@ Public Class GridCut
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
       SideAngleTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 16)
@@ -73,8 +73,8 @@ Public Class GridCut
       NumPzYTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 21)
       DimPzYTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 22)
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
       m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
       m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_ANGH, m_dAngO, m_MainWindow.GetIniFile())
@@ -152,6 +152,7 @@ Public Class GridCut
       EgtDraw()
    End Sub
 
+
    Friend Sub GridCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
@@ -167,7 +168,7 @@ Public Class GridCut
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -185,6 +186,11 @@ Public Class GridCut
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      ' se macchina solo WaterJet Disabilito/Nascondo parametri della lama
+      DepthTxBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -242,6 +248,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -256,12 +268,12 @@ Public Class GridCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
          End If
@@ -285,10 +297,8 @@ Public Class GridCut
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Disegno il taglio
@@ -317,6 +327,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -331,12 +347,12 @@ Public Class GridCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
          End If
@@ -358,10 +374,8 @@ Public Class GridCut
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio
@@ -480,6 +494,7 @@ Public Class GridCut
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -520,7 +535,7 @@ Public Class GridCut
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateGridCut() As Boolean

DirectCuts/MachineButtonsUC.xaml

@@ -19,7 +19,8 @@
          <ColumnDefinition Width="1*"/>
          <ColumnDefinition Width="1*"/>
          <ColumnDefinition Width="1*"/>
-      </Grid.ColumnDefinitions>
+         <ColumnDefinition Width="1*"/>
+        </Grid.ColumnDefinitions>
 
       <ToggleButton Name="MachineButton1" Grid.Column="0" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
          <Image Name="ImageButton1" Style="{StaticResource OmagCut_ButtonIcon}"/>
@@ -61,6 +62,10 @@
          <Image Name="ImageButton10" Style="{StaticResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
-   </Grid>
+        <ToggleButton Name="MachineButton11" Grid.Column="10" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+            <Image Name="ImageButton11" Style="{StaticResource OmagCut_ButtonIcon}"/>
+        </ToggleButton>
+
+    </Grid>
 
 </UserControl>

DirectCuts/MachineButtonsUC.xaml.vb

@@ -7,10 +7,13 @@ Public Class MachineButtonsUC
    Private m_DirectCutPage As DirectCutPageUC
    Friend m_CN As CN_generico
 
+   Public nCountButton As Integer = 11
+
    Private m_bOnlyLaser As Boolean = False
    Private m_bFirst As Boolean = True
 
-   Private Const MAX_BUTTONS As Integer = 10
+   ' 9/2 aggiunto spazio per un nuovo bottone
+   Private Const MAX_BUTTONS As Integer = 11
    Private m_nCount As Integer = 0
    Private ImageArrayY(MAX_BUTTONS - 1) As String
    Private ImageArrayN(MAX_BUTTONS - 1) As String
@@ -31,6 +34,11 @@ Public Class MachineButtonsUC
    Private Const BTN_STATE_NOTHING As String = "Nothing"
    Private Const BTN_STATE_DOOR_OPENED As String = "DoorOpened"
    Private Const BTN_STATE_DOOR_CLOSED As String = "DoorClosed"
+   Private Const BTN_STATE_PARKING As String = "Parking"
+   Private Const BTN_STATE_HOME As String = "Home"
+   Private Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Private Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
+   Private Const BTN_ENABLE_PC As String = "EnablePC"
 
    Public Sub New(Optional bOnlyLaser As Boolean = False)
       ' This call is required by the designer.
@@ -71,11 +79,17 @@ Public Class MachineButtonsUC
          GetToggleButton(nIndex + 1).Visibility = Windows.Visibility.Hidden
       Next
 
+      ' notifico nella variabile pubblica il numero di pulsanti inseriti nella barra
+      nCountButton = m_nCount
+
       ' Se variabile di stato "Nothing"/"DoorOpened"/"DoorClosed" imposto immagine fissa
       For nIndex As Integer = 0 To m_nCount - 1
          If StateFlagArray(nIndex) = BTN_STATE_NOTHING OrElse
             StateFlagArray(nIndex) = BTN_STATE_DOOR_OPENED OrElse
-            StateFlagArray(nIndex) = BTN_STATE_DOOR_CLOSED Then
+            StateFlagArray(nIndex) = BTN_STATE_DOOR_CLOSED OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_PC OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_ZONE_1 OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_ZONE_2 Then
             ' mostra immagine fissa
             Try
                Dim s As String
@@ -121,6 +135,8 @@ Public Class MachineButtonsUC
                      CurrToggleBtn.Content = "Z - C"
                   ElseIf StateFlagArray(nIndex) = K_ZBJOG Then
                      CurrToggleBtn.Content = "Z - B"
+                  ElseIf StateFlagArray(nIndex) = K_REMOTE Then
+                     CurrToggleBtn.Content = "Remote"
                   End If
                Catch ex As Exception
                   EgtOutLog("Error loading content " & StateFlagArray(nIndex))
@@ -132,7 +148,8 @@ Public Class MachineButtonsUC
    End Sub
 
    Private Sub MachineButton_Click(sender As Object, e As RoutedEventArgs) Handles MachineButton1.Click, MachineButton2.Click, MachineButton3.Click, MachineButton4.Click, MachineButton5.Click,
-                                                                                   MachineButton6.Click, MachineButton7.Click, MachineButton8.Click, MachineButton9.Click, MachineButton10.Click
+                                                                                   MachineButton6.Click, MachineButton7.Click, MachineButton8.Click, MachineButton9.Click, MachineButton10.Click,
+                                                                                   MachineButton11.Click
       Dim CurrentBtn As Primitives.ToggleButton = e.Source
       ' recupero l'inidce del bottone selezionato
       Dim nIndex As Integer = GetToggleButtonIndex(CurrentBtn) - 1
@@ -151,6 +168,18 @@ Public Class MachineButtonsUC
          Return
       End If
 
+      ' Se il bottone chiamantè quello per la selezione del pannello di controllo
+      If nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_PC) Then
+         Dim sTLuaFile As String = sBaseDir & CommandArrayY(nIndex)
+         Dim sFLuaFile As String = sBaseDir & CommandArrayN(nIndex)
+         If m_CN.nEnablePc = 1 Then
+            ExecuteMDICommand(CurrentBtn, sTLuaFile)
+         ElseIf m_CN.nEnablePc = 2 Then
+            ExecuteMDICommand(CurrentBtn, sFLuaFile)
+         End If
+         Return
+      End If
+
       If CurrentBtn.IsChecked() Then
          'EgtLuaExecFile(sBaseDir & CommandArrayY(nIndex))
          sLuaFileName = sBaseDir & CommandArrayY(nIndex)
@@ -244,9 +273,62 @@ Public Class MachineButtonsUC
                   End If
                   Return
                End If
+               ' CONTROLLO FANUC
+            Case 4
+               ' ------------------------------------ FANUC ------------------------------------
+               ' eventuale scrittura di linea di comando MDI
+               If Not String.IsNullOrEmpty(CmdString) Then
+                  ' attivo mpdalità MDI
+                  m_CN.DGeneralFunctions_WriteCncMode(2)
+                  System.Threading.Thread.Sleep(100)
+                  ' salvo la stringa di comando ricevuta dal file lua
+                  m_CN.sz_ManualDataInput = CmdString
+                  ' esguo la funzione che ha il compito di scrivere il comando MDI
+                  m_CN.MDI_command()
+               End If
+               ' attivo modalità AUTO
+               m_CN.DGeneralFunctions_WriteCncMode(7)
+               System.Threading.Thread.Sleep(100)
+               If String.IsNullOrEmpty(EValue) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue As Boolean
+                     If EValue.Trim = "1" Then bEValue = True
+                     m_CN.NC_write_var_bit(ENumber, CBool(EValue))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber, CShort(EValue))
+                  End If
+                  EgtOutLog("Fanuc_DNumber= " & ENumber & " DValue= " & EValue)
+               End If
+               ' eventale caricamento seconda variabile
+               If String.IsNullOrEmpty(EValue2) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber2)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber2)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber2.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue2 As Boolean
+                     If EValue2.Trim = "1" Then bEValue2 = True
+                     m_CN.NC_write_var_bit(ENumber2, CBool(EValue2))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber2, CShort(EValue2))
+                  End If
+                  EgtOutLog("Fanuc_DNumber2= " & ENumber2 & " DValue2= " & EValue2)
+               End If
+               Return
          End Select
       End If
 
+
       Dim nResult As Short
       ' Imposto modalità MDI per controlli num
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
@@ -263,6 +345,8 @@ Public Class MachineButtonsUC
             m_CN.DGeneralFunctions_CycleStart()
          Case 3
             'Per il siemens non devo fare nulla
+         Case 4
+            ' Nicola: 27/03/2023 attivazione della funzione M# indicata?
       End Select
 
       If b2Start Then
@@ -297,6 +381,17 @@ Public Class MachineButtonsUC
          EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)
@@ -342,6 +437,7 @@ Public Class MachineButtonsUC
                 " EType2=" & If(Not String.IsNullOrEmpty(EType2), CInt(EType2).ToString, ""))
    End Sub
 
+#Region "STATE CHANGED"
 
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_SPINDLE)
@@ -548,7 +644,11 @@ Public Class MachineButtonsUC
    End Sub
 
    Friend Sub DoorStateChanged(DoorState As Integer)
-      ' recupero le asscociazioni con i bottoni
+      If IsNothing(DoorState) Then
+         EgtOutLog("Error: door state null!")
+         Return
+      End If
+      ' recupero le associazioni con i bottoni
       Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_DOOR_OPENED)
       If nIndex = -1 Then Return
       ' bottone di apertura porte
@@ -558,7 +658,7 @@ Public Class MachineButtonsUC
       ' bottone di chiusura porte
       Dim DoorClosedButton As Primitives.ToggleButton = GetToggleButton(nIndex + 1)
       ' modifico il colore dei bottoni
-      If Not IsNothing(DoorState) Then
+      If Not IsNothing(DoorState) AndAlso Not IsNothing(DoorClosedButton) Then
          Select Case DoorState
             Case 0
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_Red")
@@ -566,7 +666,7 @@ Public Class MachineButtonsUC
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
          End Select
       End If
-      If Not IsNothing(DoorState) Then
+      If Not IsNothing(DoorState) AndAlso Not IsNothing(DoorOpenedButton) Then
          Select Case DoorState
             Case 0
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
@@ -578,6 +678,237 @@ Public Class MachineButtonsUC
       End If
    End Sub
 
+   Friend Sub ParkingStateChanged(ParkingState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_PARKING)
+      If nIndex = -1 Then Return
+      If ParkingState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
+   Friend Sub HomeStateChanged(HomeState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_HOME)
+      If nIndex = -1 Then Return
+      If HomeState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
+   Friend Sub EnableZoneStateChanged(ZoneState As Integer)
+      Dim sFlag As String = String.Empty
+      If ZoneState = 1 Then
+         sFlag = BTN_ENABLE_ZONE_1
+      ElseIf ZoneState = 2 Then
+         sFlag = BTN_ENABLE_ZONE_2
+      End If
+      ' recupero il bottone che deve essere acceso (quindi spengo l'altro)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, sFlag)
+
+      ' se non trovo nessun riferimento allora spengo entrambi i comandi
+      If nIndex = -1 Then
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_1)
+         GetToggleButton(nIndex + 1).IsChecked = False
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_2)
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Return
+      End If
+
+      If ZoneState = 1 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+         ' spengo l'altro bottone (lo stato dei due bottoni sono gestiti da una sola variabile)
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_2)
+         GetToggleButton(nIndex + 1).IsChecked = False
+
+      ElseIf ZoneState = 2 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+         ' spengo l'altro bottone (lo stato dei due bottoni sono gestiti da una sola variabile)
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_1)
+         GetToggleButton(nIndex + 1).IsChecked = False
+      End If
+   End Sub
+
+   Friend Sub EnablePcStateChanged(PcState As Integer)
+      ' il comando ButtonY accendo il Pannello_1, il comando ButtonN accendo il Pannello_2 (uno è la negazione dell'altro)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_ENABLE_PC)
+      If nIndex = -1 Then Return
+      If PcState = 1 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      ElseIf PcState = 2 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      Else
+         ' nessuno dei due pannelli attivo
+         GetToggleButton(nIndex + 1).IsChecked = False
+      End If
+   End Sub
+
+   Friend Sub TableUpChanged(TableUpState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_TABLEUP)
+      If nIndex = -1 Then Return
+      If TableUpState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
+   Friend Sub TableDownChanged(TableDownState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_TABLEDOWN)
+      If nIndex = -1 Then Return
+      If TableDownState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
    '----------------- Queste funzioni determina lo stato del bottone direttamente dalla lettura delle variabili CN
    Friend Sub XYJogChanged(ByVal bXYAxes As Boolean)
       ' recupero le asscociazioni con i bottoni
@@ -602,80 +933,97 @@ Public Class MachineButtonsUC
       ' selezoiono lo stato del bottone
       GetToggleButton(nIndex + 1).IsChecked = bBCAxes
    End Sub
+
+   Friend Sub RemoteChanged(ByVal bRemote As Boolean)
+      ' recupero le asscociazioni con i bottoni
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_REMOTE)
+      If nIndex = -1 Then Return
+      ' selezoiono lo stato del bottone
+      GetToggleButton(nIndex + 1).IsChecked = bRemote
+   End Sub
+
    '-----------------------------------------------------------------------------------------------------------------
 
+#End Region    ' State changed
+
    Private Function GetToggleButton(ByVal nIndex As Integer) As Primitives.ToggleButton
       Select Case nIndex
-      Case 1
-         Return MachineButton1
-      Case 2
-         Return MachineButton2
-      Case 3
-         Return MachineButton3
-      Case 4
-         Return MachineButton4
-      Case 5
-         Return MachineButton5
-      Case 6
-         Return MachineButton6
-      Case 7
-         Return MachineButton7
-      Case 8
-         Return MachineButton8
-      Case 9
-         Return MachineButton9
-      Case Else
-         Return MachineButton10
+         Case 1
+            Return MachineButton1
+         Case 2
+            Return MachineButton2
+         Case 3
+            Return MachineButton3
+         Case 4
+            Return MachineButton4
+         Case 5
+            Return MachineButton5
+         Case 6
+            Return MachineButton6
+         Case 7
+            Return MachineButton7
+         Case 8
+            Return MachineButton8
+         Case 9
+            Return MachineButton9
+         Case 10
+            Return MachineButton10
+         Case Else
+            Return MachineButton11
       End Select
    End Function
 
    Private Function GetToggleButtonIndex(ByVal nBtnName As Primitives.ToggleButton) As Integer
       Select Case nBtnName.Name
-      Case MachineButton1.Name
-         Return 1
-      Case MachineButton2.Name
-         Return 2
-      Case MachineButton3.Name
-         Return 3
-      Case MachineButton4.Name
-         Return 4
-      Case MachineButton5.Name
-         Return 5
-      Case MachineButton6.Name
-         Return 6
-      Case MachineButton7.Name
-         Return 7
-      Case MachineButton8.Name
-         Return 8
-      Case MachineButton9.Name
-         Return 9
-      Case Else
-         Return 10
+         Case MachineButton1.Name
+            Return 1
+         Case MachineButton2.Name
+            Return 2
+         Case MachineButton3.Name
+            Return 3
+         Case MachineButton4.Name
+            Return 4
+         Case MachineButton5.Name
+            Return 5
+         Case MachineButton6.Name
+            Return 6
+         Case MachineButton7.Name
+            Return 7
+         Case MachineButton8.Name
+            Return 8
+         Case MachineButton9.Name
+            Return 9
+         Case MachineButton10.Name
+            Return 10
+         Case Else
+            Return 11
       End Select
    End Function
 
    Private Function GetImage(ByVal nInd As Integer) As Image
       Select Case nInd
-      Case 1
-         Return ImageButton1
-      Case 2
-         Return ImageButton2
-      Case 3
-         Return ImageButton3
-      Case 4
-         Return ImageButton4
-      Case 5
-         Return ImageButton5
-      Case 6
-         Return ImageButton6
-      Case 7
-         Return ImageButton7
-      Case 8
-         Return ImageButton8
-      Case 9
-         Return ImageButton9
-      Case Else
-         Return ImageButton10
+         Case 1
+            Return ImageButton1
+         Case 2
+            Return ImageButton2
+         Case 3
+            Return ImageButton3
+         Case 4
+            Return ImageButton4
+         Case 5
+            Return ImageButton5
+         Case 6
+            Return ImageButton6
+         Case 7
+            Return ImageButton7
+         Case 8
+            Return ImageButton8
+         Case 9
+            Return ImageButton9
+         Case 10
+            Return ImageButton10
+         Case Else
+            Return ImageButton11
       End Select
    End Function
 

DirectCuts/ManualAxesMoveUC.xaml

@@ -69,10 +69,10 @@
          <EgtWPFLib:EgtTextBox x:Name="L3TxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
          <Button x:Name="R1Btn" Grid.Row="4" Height="60" Width="60" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-         <EgtWPFLib:EgtTextBox x:Name="R1TxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox x:Name="R1TxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
          <Button x:Name="R2Btn" Grid.Row="5" Height="60" Width="60" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-         <EgtWPFLib:EgtTextBox x:Name="R2TxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox x:Name="R2TxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
    
          <Grid Grid.Row="7" Grid.ColumnSpan="2">

DirectCuts/ManualAxesMoveUC.xaml.vb

@@ -21,10 +21,12 @@ Public Class ManualAxesMoveUC
       ' Messaggi
       L1SawThChBx.Content = EgtMsg(90232)   ' Spessore lama
       L2SawThChBx.Content = EgtMsg(90232)   ' Spessore lama
+
       AddHandler m_Timer.Tick, AddressOf Timer_tick
    End Sub
 
    Private Sub ManualAxesMove_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      m_CN = m_MainWindow.m_DirectCutPageUC.m_CN
       ' Valori feed e speed da lama corrente
       Dim dTemp As Double = 0
       EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
@@ -201,12 +203,13 @@ Public Class ManualAxesMoveUC
       EgtOutLog("CmdString=" & CmdString)
       ' Eseguo in MDI
       m_CN.DGeneralFunctions_WriteCncMode(2)     ' Modalità MDI
-      System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+      System.Threading.Thread.Sleep(150)
       m_CN.sz_ManualDataInput = CmdString
       m_CN.MDI_command()
-      System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+      System.Threading.Thread.Sleep(150)
       m_CN.DGeneralFunctions_CycleStart()
-      m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
+      System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+      ' m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
       m_MoveClicked = False
    End Sub
 
@@ -337,7 +340,7 @@ Public Class ManualAxesMoveUC
    End Function
 
    Private Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Sub G0Btn_Checked(sender As Object, e As RoutedEventArgs) Handles G0Btn.Checked

DirectCuts/MultipleCut.xaml

@@ -35,12 +35,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="Point1Btn" Grid.Column="0"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
 
-         </Grid>
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
             Margin="6,0,6,0">
@@ -63,12 +68,12 @@
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="5"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <Grid Grid.Row="6" Grid.ColumnSpan="2" Visibility="Visible">
@@ -119,70 +124,70 @@
 
                      <TextBlock Name="Num1TxBl" Grid.Column="0" Grid.Row="0"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz1TxBx" Grid.Column="1" Grid.Row="0" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz1TxBx" Grid.Column="1" Grid.Row="0" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz1TxBx" Grid.Column="3" Grid.Row="0" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num2TxBl" Grid.Column="0" Grid.Row="1"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz2TxBx" Grid.Column="1" Grid.Row="1" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz2TxBx" Grid.Column="1" Grid.Row="1" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz2TxBx" Grid.Column="3" Grid.Row="1" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num3TxBl" Grid.Column="0" Grid.Row="2"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz3TxBx" Grid.Column="1" Grid.Row="2" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz3TxBx" Grid.Column="1" Grid.Row="2" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz3TxBx" Grid.Column="3" Grid.Row="2" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num4TxBl" Grid.Column="0" Grid.Row="3"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz4TxBx" Grid.Column="1" Grid.Row="3" Width="75"
+                     <EgtWPFLib:EgtTextBox Name="NumPz4TxBx" Grid.Column="1" Grid.Row="3" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz4TxBx" Grid.Column="3" Grid.Row="3" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num5TxBl" Grid.Column="0" Grid.Row="4"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz5TxBx" Grid.Column="1" Grid.Row="4" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz5TxBx" Grid.Column="1" Grid.Row="4" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz5TxBx" Grid.Column="3" Grid.Row="4" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num6TxBl" Grid.Column="0" Grid.Row="5"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz6TxBx" Grid.Column="1" Grid.Row="5" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz6TxBx" Grid.Column="1" Grid.Row="5" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz6TxBx" Grid.Column="3" Grid.Row="5" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num7TxBl" Grid.Column="0" Grid.Row="6"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz7TxBx" Grid.Column="1" Grid.Row="6" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz7TxBx" Grid.Column="1" Grid.Row="6" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz7TxBx" Grid.Column="3" Grid.Row="6" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num8TxBl" Grid.Column="0" Grid.Row="7"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz8TxBx" Grid.Column="1" Grid.Row="7" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz8TxBx" Grid.Column="1" Grid.Row="7" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz8TxBx" Grid.Column="3" Grid.Row="7" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num9TxBl" Grid.Column="0" Grid.Row="8"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz9TxBx" Grid.Column="1" Grid.Row="8" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz9TxBx" Grid.Column="1" Grid.Row="8" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz9TxBx" Grid.Column="3" Grid.Row="8" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num10TxBl" Grid.Column="0" Grid.Row="9"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz10TxBx" Grid.Column="1" Grid.Row="9" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz10TxBx" Grid.Column="1" Grid.Row="9" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz10TxBx" Grid.Column="3" Grid.Row="9" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -256,12 +261,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </Grid>
 

DirectCuts/MultipleCut.xaml.vb

@@ -63,8 +63,8 @@ Public Class MultipleCut
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
@@ -72,8 +72,8 @@ Public Class MultipleCut
       NumPzTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 17)
       DimPzTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 18)
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       Num1TxBl.Text = "1"
       Num2TxBl.Text = "2"
       Num3TxBl.Text = "3"
@@ -195,7 +195,7 @@ Public Class MultipleCut
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -213,6 +213,10 @@ Public Class MultipleCut
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      DepthTxBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -270,6 +274,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -284,12 +294,14 @@ Public Class MultipleCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
          End If
@@ -312,10 +324,9 @@ Public Class MultipleCut
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
       ' Disegno il taglio
       CreateMultipleCut()
@@ -343,6 +354,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -357,12 +374,12 @@ Public Class MultipleCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
          End If
@@ -383,10 +400,9 @@ Public Class MultipleCut
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio
@@ -524,6 +540,7 @@ Public Class MultipleCut
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -564,7 +581,7 @@ Public Class MultipleCut
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateMultipleCut() As Boolean

DirectCuts/Polishing.xaml

@@ -63,12 +63,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
 
       </Grid>
 

DirectCuts/Polishing.xaml.vb

@@ -6,6 +6,8 @@ Public Class Polishing
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   Private m_refControlDirectCutUC As ControlsDirectCutUC1
+
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Flag di simulazione in corso
@@ -23,13 +25,14 @@ Public Class Polishing
 
    Private Sub Polishing_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' assegno messaggi
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
    End Sub
 
    Private Sub Polishing_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Attivo la pagina
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_refControlDirectCutUC = m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC1
       m_bActive = True
       ' Se rientro da simulazione
       If m_bSimul Then
@@ -60,7 +63,7 @@ Public Class Polishing
       If PolishingCmBx.SelectedIndex < 0 Then
          m_bPoliOk = False
          UpdateSimulOkBtn()
-      End If 
+      End If
       ' Rendo semitrasparente il grezzo
       Dim nRawSolidId = EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_RAW_SOLID)
       EgtSetAlpha( nRawSolidId, 60)
@@ -72,7 +75,7 @@ Public Class Polishing
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_refControlDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC1.DirectCutPages.DirectCut
          ' Cancello eventuali lucidature
          RemovePolishings()
          ' Riattivo eventuali lavorazioni presenti
@@ -148,6 +151,7 @@ Public Class Polishing
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -188,7 +192,7 @@ Public Class Polishing
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreatePolishing( sKitName As String) As Boolean

DirectCuts/SawTestUC.xaml

@@ -37,12 +37,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
 
-         </Grid>
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
             Margin="6,0,6,0">
@@ -65,7 +70,7 @@
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="OffsetTxBl" Grid.Column="0" Grid.Row="5"
@@ -80,12 +85,16 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </Grid>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
    
       </Grid>
 

DirectCuts/SawTestUC.xaml.vb

@@ -5,6 +5,7 @@ Public Class SawTestUC
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   Private m_refControlDirectCutUC As ControlsDirectCutUC1
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Flag di simulazione in corso
@@ -58,14 +59,14 @@ Public Class SawTestUC
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
       OffsetTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 28)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo test
       m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_TEST_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
       m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_TEST_LENGTH, m_dLen, m_MainWindow.GetIniFile())
@@ -76,6 +77,7 @@ Public Class SawTestUC
    Private Sub SawTest_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Attivo la pagina
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_refControlDirectCutUC = m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC1
       m_bActive = True
       ' Se rientro da simulazione
       If m_bSimul Then
@@ -139,7 +141,7 @@ Public Class SawTestUC
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_TEST_OFFSET, DoubleToString( m_dOffset, 2), m_MainWindow.GetIniFile())
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_refControlDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC1.DirectCutPages.DirectCut1
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -419,6 +421,7 @@ Public Class SawTestUC
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -459,7 +462,7 @@ Public Class SawTestUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleCut() As Boolean

DirectCuts/SingleCutAuto.xaml.vb

@@ -363,7 +363,7 @@ Public Class SingleCutAuto
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -715,6 +715,7 @@ Public Class SingleCutAuto
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -758,7 +759,7 @@ Public Class SingleCutAuto
       ' reimposto il precedetne utensile e lavorazione
       m_MainWindow.m_CurrentMachine.sCurrSaw = m_PrecSaw
       m_MainWindow.m_CurrentMachine.sCurrSawing = m_PrecSawing
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleCut() As Boolean

DirectCuts/SingleCutUC.xaml

@@ -38,11 +38,16 @@
             </Grid.ColumnDefinitions>
 
             <ToggleButton Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
 
-         </Grid>
+            <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
+            </Grid>
 
          <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
             <ComboBox.ItemTemplate>
@@ -64,12 +69,12 @@
    
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
    
          <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="5"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="OffsetTxBl" Grid.Column="0" Grid.Row="6"
@@ -106,10 +111,14 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
             <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
             </Button>
          </Grid>
 

DirectCuts/SingleCutUC.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Threading
+Imports EgtUILib
 
 Public Class SingleCutUC
 
@@ -43,6 +44,10 @@ Public Class SingleCutUC
    Private Const MIN_CUT_LEN As Double = 10.0
    Private Const MAX_SIDE_ANG As Double = 60.0
    ' Costanti che indicano la modalità di acquisizione dei punti
+
+   ' Utilizzato per aggiornare la posizione della macchina
+   Private m_RefreshTimer As New DispatcherTimer
+
    Private Enum PT_MODE As Integer
       SAW = 0
       LASER = 1
@@ -57,25 +62,25 @@ Public Class SingleCutUC
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' Assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      Point2Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
       DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
       LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
       DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
       SideAngleTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 16)
       OffsetTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 28)
       SawThChBl.Text = EgtMsg(90232)   ' Spessore lama
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dAngV = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dLen = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_ANGV, m_dAngV, m_MainWindow.GetIniFile())
       m_dOffset = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_OFFSET, m_dOffset, m_MainWindow.GetIniFile())
       m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
-      m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
    End Sub
 
    Private Sub SingleCut_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -92,6 +97,10 @@ Public Class SingleCutUC
          m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
          EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
          EgtDraw()
+         ' riavvio il timer per visualizzare la poszione della macchina
+         If Not IsNothing(m_RefreshTimer) Then
+            m_RefreshTimer.Start()
+         End If
          Return
       End If
       ' Disabilito registrazione progetto modificato
@@ -114,7 +123,7 @@ Public Class SingleCutUC
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -137,24 +146,46 @@ Public Class SingleCutUC
       Point2Btn.IsEnabled = False
       ' Deseleziono bottone primo punto
       Point1Btn.IsChecked = False
+
+      ' la visualizzazione dei comandi è gestita dalla DirectCutPageUC richiamando la funzione ReloadParam
+
+      ' forzo la macchina ad essere visibile fin da subito
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
+      m_MainWindow.m_DirectCutPageUC.m_nMachLook = MCH_LOOK.TAB
+      ' Creo il timer il timer per aggiornare il posizionamento della macchina
+      AddHandler m_RefreshTimer.Tick, AddressOf RefreshTimer_tick
+      m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(1000)
+
       ' Aggiorno visualizzazione
       EgtDraw()
+
+      ' Avvi il timer
+      m_RefreshTimer.Start()
+   End Sub
+
+   Private Sub RefreshTimer_tick()
+      ' se è impostata la visualizzazione della sola tavola allora non aggiorno il disegno
+      If m_MainWindow.m_DirectCutPageUC.m_nMachLook = MCH_LOOK.TAB Then Return
+      ' Aggiorno visualizzazione
+      SetMachineInCurrPos()
+      ' Aggiorno il disegno
+      EgtDraw()
    End Sub
 
    Friend Sub SingleCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_LENGTH, DoubleToString( m_dLen, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_ANGV, DoubleToString( m_dAngV, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_LENGTH, DoubleToString(m_dLen, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_ANGV, DoubleToString(m_dAngV, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_OFFSET, DoubleToString(m_dOffset, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_SAWTH, If(m_bSawTh, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -168,10 +199,18 @@ Public Class SingleCutUC
          EgtSetMachineLook(MCH_LOOK.TAB)
          EgtDraw()
       End If
+      ' interrompo il Timer per aggiornare la visualizzazione del posizionamento macchina 
+      m_RefreshTimer.Stop()
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      ' se macchina solo WaterJet Disabilito/Nascondo parametri della lama
+      DepthTxBx.IsEnabled = bIsSaw
+      SawThChBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -229,6 +268,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizione lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
@@ -242,12 +287,12 @@ Public Class SingleCutUC
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
          End If
@@ -264,17 +309,16 @@ Public Class SingleCutUC
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP1
          m_ptTipP1 = m_ptPrev
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
 
       ' Disegno il taglio
@@ -284,6 +328,7 @@ Public Class SingleCutUC
       m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
       EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
       EgtDraw()
+
       ' Seleziono il bottone per indicare che il primo punto è stato acquisito
       Point1Btn.IsChecked = True
       ' Abilito e deseleziono secondo punto
@@ -303,6 +348,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
@@ -316,12 +367,14 @@ Public Class SingleCutUC
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
          End If
@@ -336,17 +389,15 @@ Public Class SingleCutUC
          m_dAngV = 90 - dTAngV
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio
@@ -456,7 +507,7 @@ Public Class SingleCutUC
       EgtDraw()
    End Sub
 
-   Private Sub SawThick_Click( sender As Object, e As RoutedEventArgs) Handles SawThChBx.Click
+   Private Sub SawThick_Click(sender As Object, e As RoutedEventArgs) Handles SawThChBx.Click
       ' Recupero lo stato di check
       m_bSawTh = SawThChBx.IsChecked()
       ' Disegno il taglio
@@ -504,6 +555,7 @@ Public Class SingleCutUC
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -515,9 +567,9 @@ Public Class SingleCutUC
       m_CurrProjPage.SetWarningMessage( "Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -544,7 +596,7 @@ Public Class SingleCutUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleCut() As Boolean
@@ -559,9 +611,13 @@ Public Class SingleCutUC
       Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
       ' Recupero spessore lama corrente
       Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       EgtTdbSetCurrTool(sSaw)
       Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      ' Se è impostata una lavorazione di lama
+      If Not String.IsNullOrEmpty(sSawing) Then
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      End If
       ' Rimuovo eventuale vecchio pezzo per taglio diretto
       EraseDirectCutPart()
       ' Disattivo eventuali lavorazioni presenti
@@ -574,14 +630,19 @@ Public Class SingleCutUC
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
-      If Math.Abs(m_dOffset) > 10 * EPS_SMALL Then
-         Dim dTotOffset = m_dOffset
-         If m_bSawTh Then dTotOffset += If( m_dOffset > 0, dThick, -dThick)
+      ' Applico la correzione di spessore lama -> anche se Offset=0! ver_2.5b1
+      Dim dTotOffset = m_dOffset
+      If m_bSawTh Then
+         dTotOffset += If(m_dOffset > 0, dThick, -dThick)
+         EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
+      Else
          EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
       End If
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, m_dAngV)
+      ' Imposto se disabilitare l'inversine di direzione del taglio
+      If Not m_MainWindow.m_CurrentMachine.bEnableInvert Then EgtSetInfo(nCutId, INFO_ENABLE_INVERT, 0)
       ' Creo layer per crocetta di riferimento
       Dim nCrossLayerId = EgtCreateGroup(nPartId)
       ' Aggiungo crocetta/e

DirectCuts/SingleDrillUC.xaml

@@ -38,8 +38,10 @@
                 </Grid.ColumnDefinitions>
 
                 <ToggleButton Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-      
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-PImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
 
             </Grid>
 
@@ -77,8 +79,12 @@
                     <ColumnDefinition Width="1*"/>
                 </Grid.ColumnDefinitions>
 
-                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
                 <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
                 </Button>

DirectCuts/SingleDrillUC.xaml.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports System.Collections.ObjectModel
 Public Class SingleDrillUC
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
@@ -37,6 +38,8 @@ Public Class SingleDrillUC
 
    Private m_dDiameter As Double = 0
 
+   Private m_sCurrDrill As String = String.Empty
+
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
    Private Const MIN_CUT_LEN As Double = 10.0
@@ -61,14 +64,17 @@ Public Class SingleDrillUC
       PointModeCmBx.ItemsSource = m_PointsModeArray
 
       ' Assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      Point1Btn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
    End Sub
 
    Private Sub SingleDrill_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      m_sCurrDrill = m_CurrentMachine.sCurrDrill
+      GetDrillFromDrilling(m_sCurrDrill, m_CurrentMachine.sCurrDrilling)
+
       ' recupero informazioni del foretto usato
-      EgtTdbSetCurrTool(m_CurrentMachine.sCurrDrill)
+      EgtTdbSetCurrTool(m_sCurrDrill)
       EgtTdbGetCurrToolParam(MCH_TP.DIAM, m_dDiameter)
 
       ' Attivo la pagina
@@ -130,7 +136,7 @@ Public Class SingleDrillUC
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -215,7 +221,7 @@ Public Class SingleDrillUC
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
 
          ' Ricavo dati Foretto corrente
-         Dim sDrill As String = m_MainWindow.m_CurrentMachine.sCurrDrill
+         Dim sDrill As String = m_sCurrDrill
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
@@ -245,9 +251,9 @@ Public Class SingleDrillUC
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
          ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrDrill
+         Dim sDrill As String = m_sCurrDrill
          ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         If Not EgtSetCalcTool(sDrill, "H1", 1) Then Return
       End If
 
       ' Disegno il taglio
@@ -261,6 +267,42 @@ Public Class SingleDrillUC
       Point1Btn.IsChecked = True
    End Sub
 
+   'Private Sub GetDrillFromDrilling(ByRef sCurrDrill As String)
+   '   If String.IsNullOrEmpty(sCurrDrill) Or String.IsNullOrWhiteSpace(sCurrDrill) Then
+   '      ' creo l'elenco degli utensili di foratura
+   '      Dim sToolName As String = String.Empty
+   '      Dim nType As Integer = MCH_TY.NONE
+   '      Dim DrillToolList As New ObservableCollection(Of String)
+   '      DrillToolList.Clear()
+   '      If EgtTdbGetFirstTool(MCH_TF.DRILLBIT, sToolName, nType) Then
+   '         DrillToolList.Add(sToolName)
+   '         While EgtTdbGetNextTool(MCH_TF.DRILLBIT, sToolName, nType)
+   '            DrillToolList.Add(sToolName)
+   '         End While
+   '      End If
+   '      ' recupero l'utensile associato alla lavorazione
+   '      Dim sCurrDrilling As String = m_MainWindow.m_CurrentMachine.sCurrDrilling
+   '      Dim ToolString As String = String.Empty
+   '      EgtMdbSetCurrMachining(sCurrDrilling)
+   '      ' Recupero nome utensile tramite TUUID
+   '      Dim sTuuid As String = String.Empty
+   '      EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sTuuid)
+   '      EgtTdbGetToolFromUUID(sTuuid, ToolString)
+   '      Dim bToolExist As Boolean = False
+   '      For Each CurrTool As IEnumerable In DrillToolList
+   '         If CurrTool.ToString() = ToolString Then
+   '            bToolExist = True
+   '            Exit For
+   '         End If
+   '      Next
+   '      If bToolExist Then
+   '         sCurrDrill = ToolString
+   '      Else
+   '         sCurrDrill = String.Empty
+   '      End If
+   '   End If
+   'End Sub
+
    Private Sub XcoordTxBx_EgtClosed(sender As Object, e As EventArgs) Handles XcoordTxBx.EgtClosed
       ' Recupero il valore della coordinata (in 0 Tab)
       Dim dXcoord As Double = 0
@@ -300,6 +342,7 @@ Public Class SingleDrillUC
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -340,7 +383,7 @@ Public Class SingleDrillUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleDrill() As Boolean
@@ -354,10 +397,11 @@ Public Class SingleDrillUC
       ' Spessore grezzo
       Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
       ' Recupero spessore lama corrente
-      Dim sDrill As String = m_MainWindow.m_CurrentMachine.sCurrDrill
+      Dim sDrill As String = m_sCurrDrill
+      GetDrillFromDrilling(sDrill, m_MainWindow.m_CurrentMachine.sCurrDrilling)
       EgtTdbSetCurrTool(sDrill)
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      Dim dDiam As Double = 0
+      EgtTdbGetCurrToolParam(MCH_TP.DIAM, dDiam)
       ' Rimuovo eventuale vecchio pezzo per taglio diretto
       EraseDirectCutPart()
       ' Disattivo eventuali lavorazioni presenti

DirectCuts/SquaringUC.xaml

@@ -0,0 +1,162 @@
+<UserControl x:Class="SquaringUC"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   mc:Ignorable="d" 
+   d:DesignHeight="597.3" d:DesignWidth="256">
+
+   <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{StaticResource OmagCut_LightGray}">-->
+   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
+
+      <!-- Definizione della Grid MultipleCut -->
+      <Grid Name="SingleCutGrid" >
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="2*"/>
+            <ColumnDefinition Width="1*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="2*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1*"/>
+         </Grid.RowDefinitions>
+
+         <!--<Grid Grid.Row="0" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+            </Grid>-->
+
+         <!--<ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
+            Margin="6,0,6,0">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>-->
+
+         <!--<TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+         <TextBlock Name="OffsetTxBl" Grid.Column="0" Grid.Row="3"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="OffsetTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
+         <TextBlock Name="ExtraLenTxBl" Grid.Column="0" Grid.Row="4"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="ExtraLenTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
+         <!--<TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
+            <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="4"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+         <!--<Grid Grid.Row="5" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1.5*"/>
+                    <ColumnDefinition Width="2"/>
+                    <ColumnDefinition Width="1.5*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                </Grid.RowDefinitions>
+
+                <Border Grid.Column="1" Grid.Row="0" Grid.RowSpan="4" Background="Black" />
+
+                <TextBlock Name="NumPzXTxBl" Grid.Column="0" Grid.Row="0"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <TextBlock Name="DimPzXTxBl" Grid.Column="2" Grid.Row="0"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+
+                <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                <EgtWPFLib:EgtTextBox Name="DimPzXTxBx" Grid.Column="2" Grid.Row="1" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}" />
+
+                <TextBlock Name="NumPzYTxBl" Grid.Column="0" Grid.Row="2"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <TextBlock Name="DimPzYTxBl" Grid.Column="2" Grid.Row="2"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+
+                <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                <EgtWPFLib:EgtTextBox Name="DimPzYTxBx" Grid.Column="2" Grid.Row="3" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}" />
+
+            </Grid>
+
+            <TextBlock Name="SideTxBl" Grid.Row="6" Grid.ColumnSpan="2"
+             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <CheckBox Name="SideChBx" Grid.Row="6" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Right" Margin="0,0,6,0"/>-->
+
+         <Grid Grid.Row="7" Grid.ColumnSpan="2">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+            <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+            <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+         </Grid>
+
+         <Grid Grid.Row="11" Grid.ColumnSpan="2">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
+
+      </Grid>
+
+   </Border>
+</UserControl>

DirectCuts/SquaringUC.xaml.vb

@@ -0,0 +1,442 @@
+Imports EgtUILib
+
+Public Class SquaringUC
+
+   ' Riferimenti a pagine
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   ' Flag di pagina attiva
+   Private m_bActive As Boolean = False
+   ' Flag di simulazione in corso
+   Private m_bSimul As Boolean = False
+
+   ' Origine tavola e dati grezzo
+   Private m_bRawOk As Boolean = False
+   Private m_ptTabOri As Point3d
+   Private m_ptRawMin As Point3d
+   Private m_ptRawMax As Point3d
+   ' Parametri P1 acquisito
+   Private m_ptTipP1 As Point3d
+   Private m_vtToolP1 As Vector3d
+   ' Parametri P2 acquisito
+   Private m_ptTipP2 As Point3d
+   Private m_vtToolP2 As Vector3d
+   ' Parametri della lavorazione
+   Private m_bCutOk As Boolean = False
+   Private m_dDepth As Double = 0
+   Private m_dOffsetSquaring As Double = 150
+   Private m_dExtraLength As Double = 0
+   Private m_dAngO As Double = 180
+   Private m_dAngV As Double = 0
+   Private m_nNumX As Integer = 0
+   Private m_dDimX As Double = 0
+   Private m_nNumY As Integer = 0
+   Private m_dDimY As Double = 0
+   Private m_bHeadSide As Boolean = False
+
+   ' Punto selezionato nel disegno
+   Private m_ptPrev As Point3d
+   ' Layer per crocette temporanee
+   Private m_nTempLay As Integer = GDB_ID.NULL
+
+   ' Costanti
+   Private Const MAX_TAB_DEPTH As Double = 10.0
+   Private Const MIN_CUT_LEN As Double = 10.0
+   Private Const MAX_SIDE_ANG As Double = 60.0
+
+   'Costante che indica il lato in cui posizionare i tagli
+   Private Enum CutSide As Integer
+      Left
+      Right
+   End Enum
+
+   Private Sub GridCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      OffsetTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 28)
+      ' 90260=Extra length
+      ExtraLenTxBl.Text = EgtMsg(90260)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+
+      ' Carico i dati dell'ultimo taglio
+      m_dOffsetSquaring = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_OFFSET_SQUARING, m_dOffsetSquaring, m_MainWindow.GetIniFile())
+      m_dExtraLength = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_EXTRA_LEN_SQUARING, m_dExtraLength, m_MainWindow.GetIniFile())
+      m_dDepth = 0
+      m_dAngO = 90
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_nNumX = 1
+      m_dDimX = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
+      m_nNumY = 1
+      m_dDimY = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMY, m_dDimY, m_MainWindow.GetIniFile())
+      m_bHeadSide = False
+   End Sub
+
+   Private Sub Squaring_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      ' Attivo la pagina
+      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_bActive = True
+      ' Se rientro da simulazione
+      If m_bSimul Then
+         m_bSimul = False
+         ' Disabilito registrazione progetto modificato
+         EgtDisableModified()
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+         Return
+      End If
+      ' Disabilito registrazione progetto modificato
+      EgtDisableModified()
+      ' Creo layer temporaneo per crocette
+      m_nTempLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
+      ' Origine tavola
+      m_bRawOk = True
+      If Not EgtGetTableRef(1, m_ptTabOri) Then
+         m_bRawOk = False
+         EgtOutLog("Error on TableRef1")
+      End If
+
+      ' Dati del grezzo
+      If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then
+         m_bRawOk = False
+         EgtOutLog("Error on RawBox")
+      End If
+      ' calcolo lalavorazione di squadratura
+      RefreshSquaring()
+   End Sub
+
+   Private Sub RefreshSquaring()
+      If Not m_bRawOk Then Return
+
+      Dim m_ThickSaw As Double
+      EgtTdbGetCurrToolParam(MCH_TP.THICK, m_ThickSaw)
+
+      m_dDepth = CamAuto.GetRawHeight()
+      m_dDimX = Math.Abs(m_ptRawMax.x - m_ptRawMin.x) - 2 * (m_dOffsetSquaring)
+      m_dDimY = Math.Abs(m_ptRawMax.y - m_ptRawMin.y) - 2 * (m_dOffsetSquaring)
+
+      Dim ptStart As New Point3d(m_ptRawMin.x + m_dOffsetSquaring - m_ThickSaw, m_ptRawMin.y + m_dOffsetSquaring, m_ptRawMin.z)
+      Dim ptEnd As New Point3d(ptStart.x + m_dDimX, ptStart.y, m_ptRawMin.z)
+
+      SetCoordVisibility(True)
+      ShowCoord()
+
+      OffsetTxBx.Text = LenToString(m_dOffsetSquaring, 1)
+      ExtraLenTxBx.Text = LenToString(m_dExtraLength, 1)
+      m_bCutOk = False
+      UpdateSimulOkBtn()
+
+      SquaringPoint(ptStart, ptEnd)
+      m_ptPrev = ptStart
+   End Sub
+
+   Friend Sub Squaring_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      ' Salvo i dati correnti
+      ' Salvo i dati correnti
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_OFFSET_SQUARING, DoubleToString(m_dOffsetSquaring, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_EXTRA_LEN_SQUARING, DoubleToString(m_dExtraLength, 2), m_MainWindow.GetIniFile())
+      ' Se non vado in simulazione
+      If Not m_bSimul Then
+         ' Dichiaro sottopagina da non riattivare
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
+         ' Rimuovo layer temporaneo per crocette
+         EgtErase(m_nTempLay)
+         ' Rimuovo eventuale pezzo per taglio diretto
+         EraseDirectCutPart()
+         ' Riattivo eventuali lavorazioni presenti
+         ActivateAllMachinings()
+         ' Abilito registrazione progetto modificato
+         EgtEnableModified()
+         ' Nascondo la macchina
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+      End If
+      ' Dichiaro pagina non attiva
+      m_bActive = False
+   End Sub
+
+   Private Sub UpdateSimulOkBtn()
+      If m_bCutOk Then
+         SimulBtn.IsEnabled = True
+         SimulBtn.Foreground = Brushes.Black
+         OkBtn.IsEnabled = True
+         OkBtn.Foreground = Brushes.Black
+      Else
+         SimulBtn.IsEnabled = False
+         SimulBtn.Foreground = Brushes.DarkGray
+         OkBtn.IsEnabled = False
+         OkBtn.Foreground = Brushes.DarkGray
+      End If
+   End Sub
+
+   Private Sub SquaringPoint(ptMin As Point3d, ptMax As Point3d)
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Verifico configurazione tavola e grezzo
+      If Not m_bRawOk Then Return
+
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+      '------------- BOTTOM LEFT -------------------
+      ' Assegno punto selezionato nel disegno a m_ptTipP1
+      m_ptTipP1 = ptMin
+      ' Porto il tip nell'origine tavola
+      m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
+      ' Reimposto eventuale precedente utensile
+      EgtSetCalcTool(sTool, sHead, nExit)
+      '-------------  TOP RIGHT   -------------------
+      ' Assegno punto selezionato nel disegno a m_ptTipP2
+      m_ptTipP2 = ptMax
+      ' Porto il tip nell'origine tavola
+      m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
+      ' Reimposto eventuale precedente utensile
+      EgtSetCalcTool(sTool, sHead, nExit)
+
+      ' Se il secondo punto non coincide con il primo, disegno il taglio
+      Dim vtDiff As Vector3d = m_ptTipP2 - m_ptTipP1
+      vtDiff.z = 0
+      Dim dLen As Double
+      Dim dAngVertDeg As Double
+      Dim dAngOrizzDeg As Double
+      vtDiff.ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
+      If dLen > EPS_SMALL Then
+         m_dAngO = dAngOrizzDeg
+         CreateGridCut()
+         ' visuliazzo tavola 
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+      End If
+   End Sub
+
+   Private Sub OffsetTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsetTxBx.EgtClosed
+      ' Verifico che l'offset impostato non sia superiore a quello massimo
+      Dim dMaxOffset As Double = Math.Min(m_dDimX, m_dDimY) / 2 - 15
+      Dim dOffset As Double = 0
+      StringToLen(OffsetTxBx.Text, dOffset)
+      If dOffset < 0 Then
+         dOffset = 0
+      ElseIf dOffset > dMaxOffset Then
+         dOffset = dMaxOffset
+      End If
+      m_dOffsetSquaring = dOffset
+      OffsetTxBx.Text = LenToString(m_dOffsetSquaring, 2)
+      ' Disegno il taglio
+      RefreshSquaring()
+      EgtDraw()
+   End Sub
+
+   Private Sub ExtraLength_EgtClosed(sender As Object, e As EventArgs) Handles ExtraLenTxBx.EgtClosed
+      ' Verifico che il valore indicato sia almeno maggiore dell'offset indicato
+      Dim dOffset As Double = 0
+      StringToLen(OffsetTxBx.Text, dOffset)
+      Dim MadExtraLeng As Double = Math.Abs(dOffset)
+      Dim dExtraLen As Double
+      StringToLen(ExtraLenTxBx.Text, dExtraLen)
+      If dExtraLen < 0 AndAlso dExtraLen < -MadExtraLeng Then
+         dExtraLen = 0
+      End If
+      m_dExtraLength = dExtraLen
+      ExtraLenTxBx.Text = LenToString(m_dExtraLength, 2)
+      ' Disegno il taglio
+      RefreshSquaring()
+      EgtDraw()
+   End Sub
+
+   Private Sub SimulBtn_Click(sender As Object, e As RoutedEventArgs) Handles SimulBtn.Click
+      ' Verifico ci sia un taglio valido
+      If Not m_bCutOk Then Return
+      ' Salvo il progetto con le lavorazioni
+      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\" & "DirectProj.nge"
+      m_MainWindow.m_CurrentProjectPageUC.SaveFile(sMchPath, False)
+      ' Predispongo passaggio a simulazione
+      m_bSimul = True
+      m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
+      m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
+      m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
+      m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
+      m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.Simulation
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+#If TRIAL Then
+      m_CurrProjPage.SetWarningMessage("Trial Version")
+#Else
+      ' Verifico non sia versione Ufficio
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
+      End If
+      ' Verifico ci sia un taglio valido
+      If Not m_bCutOk Then Return
+      ' Salvo il progetto con le lavorazioni
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\" & "DirectProj.nge"
+      m_MainWindow.m_CurrentProjectPageUC.SaveFile(sMchPath, False)
+      ' Genero file CNC (lancio anche se errore in precedenza)
+      Dim sCncPath As String = m_MainWindow.GetCncDir() & "\DirectCut" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+      Dim bOk As Boolean = EgtGenerate(sCncPath, "OmagCut ver." & m_MainWindow.GetVersion())
+      ' Se errore in generazione, segnalo l'errore ed esco
+      If Not bOk Then
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
+         Return
+      End If
+      ' Download programma (eventuali errori sono segnalati dalla funzione)
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+         ' copio il progetto corrente come progetto in lavorazione
+         Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
+         My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
+         ' lancio eventuale lua post-trasmissione
+         m_MainWindow.ExecSentProgScript(True)
+      End If
+#End If
+   End Sub
+
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
+   End Sub
+
+   Private Function CreateGridCut() As Boolean
+      ' Verifico sia definito il punto iniziale e il grezzo
+      If Not m_bRawOk Then
+         m_bCutOk = False
+         Return False
+      End If
+      ' Spessore grezzo
+      Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
+      ' Rimuovo eventuale vecchio pezzo per taglio diretto
+      EraseDirectCutPart()
+      ' Disattivo eventuali lavorazioni presenti
+      DeactivateAllMachinings()
+      ' Creo nuovo pezzo per il taglio diretto
+      Dim nPartId = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetName(nPartId, NAME_DIRECTCUT)
+      Dim nLayerId = EgtCreateGroup(nPartId)
+      EgtSetName(nLayerId, NAME_OUTLOOP)
+      ' Creo il taglio parallelo alla lama
+      Dim ptStart As Point3d = m_ptTipP1
+      ptStart.z = 0
+      ' Funzione che crea i tagli successivi al primo
+      MultiplyCut(nLayerId)
+      ' Calcolo punto di inserimento nel grezzo
+      Dim ptMin, ptMax As Point3d
+      EgtGetBBoxGlob(nPartId, GDB_BB.STANDARD, ptMin, ptMax)
+      Dim ptIns As Point3d = ptMin + (m_ptTabOri - m_ptRawMin)
+      ptIns.z = dRawHeight
+      ' Inserisco il pezzo nel grezzo
+      EgtAddPartToRawPart(nPartId, ptIns, m_MainWindow.m_CurrentProjectPageUC.m_nRawId)
+      ' Inserisco la lavorazione
+      m_bCutOk = AddMachinings(nPartId) AndAlso UpdateAllMachiningsToolpaths()
+      EgtSetCurrPhase(1)
+      ' Eventuale eliminazione Home finale
+      If Not m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome Then
+         RemoveFinalHome()
+      End If
+      UpdateSimulOkBtn()
+      Return m_bCutOk
+   End Function
+
+   Private Function MultiplyCut(nLayerId As Integer) As Boolean
+      ' Recupero lo spessore del taglio della lama o del waterjet correntemente attiva
+      Dim nType As Integer = 0
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      Dim dThick As Double = 0
+      EgtTdbGetCurrToolParam(If(nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
+      ' Ricalcolo lo spessore in base all'inclinazione
+      dThick = dThick / Math.Cos(m_dAngV * Math.PI / 180)
+      ' Imposto angolo di rotazione a seconda del lato dei tagli paralleli
+      Dim dRotAngOX As Double = 90
+      ' Recupero dati da interfaccia
+      Dim dDimPzX As Double = m_dDimX
+      Dim nNumPzX As Integer = m_nNumX
+      Dim dDimPzY As Double = m_dDimY
+      Dim nNumPzY As Integer = m_nNumY
+      ' Definisco vettore di spostamento
+      Dim vtDelta As Vector3d
+      ' Calcolo primo taglio parallelo
+      Dim ptStart As Point3d = m_ptTipP1
+      ptStart.z = 0
+      If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
+         Dim dLenX As Double = dThick + (dDimPzX + dThick) * nNumPzX
+         Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
+         ' Imposto affondamento e angolo di fianco sul taglio
+         EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
+         EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
+         ' Allungo la geometria
+         EgtExtendCurveStartByLen(nCutParaId, m_dOffsetSquaring + m_dExtraLength)
+         EgtExtendCurveEndByLen(nCutParaId, m_dOffsetSquaring + +m_dExtraLength)
+         ' Calcolo vettore di spostamento
+         vtDelta = Vector3d.FromPolar((dDimPzY + dThick), m_dAngO)
+         ' Ruoto il vettore di traslazione 
+         vtDelta.Rotate(Vector3d.Z_AX, dRotAngOX)
+         For Index As Integer = 1 To nNumPzY
+            Dim vtPerpMove As Vector3d = Index * vtDelta
+            ' Creo copie
+            Dim nCut2Id = EgtCopyGlob(nCutParaId, nLayerId)
+            EgtMove(nCut2Id, vtPerpMove, GDB_RT.GLOB)
+         Next
+         ' Calcolo primo taglio perpendicolare
+         Dim dLenY As Double = dThick + (dDimPzY + dThick) * nNumPzY
+         ' Arretro il punto di partenza di uno spessore lama
+         Dim vtDeltaPos As Vector3d = Vector3d.FromPolar(dThick + 0.1, m_dAngO - 90)
+         Dim nCutPerpId = EgtCreateLinePDL(nLayerId, ptStart + vtDeltaPos, m_dAngO + 90, dLenY + 0.2)
+         ' Imposto affondamento e angolo di fianco sul taglio
+         EgtSetInfo(nCutPerpId, INFO_DEPTH, m_dDepth)
+         EgtSetInfo(nCutPerpId, INFO_SIDE_ANGLE, m_dAngV)
+         ' Allungo la geometria
+         EgtExtendCurveStartByLen(nCutPerpId, m_dOffsetSquaring + m_dExtraLength)
+         EgtExtendCurveEndByLen(nCutPerpId, m_dOffsetSquaring + +m_dExtraLength)
+         ' Calcolo secondo vettore di spostamento
+         vtDelta = Vector3d.FromPolar((dDimPzX + dThick), m_dAngO)
+         For Index As Integer = 1 To nNumPzX
+            Dim vtPerpMove As Vector3d = vtDelta * Index
+            ' Creo copie
+            Dim nCut3Id = EgtCopyGlob(nCutPerpId, nLayerId)
+            EgtMove(nCut3Id, vtPerpMove, GDB_RT.GLOB)
+         Next
+      End If
+      Return True
+   End Function
+
+   Private Sub SetCoordVisibility(bShow As Boolean)
+      XcoordTxBl.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      XcoordTxBx.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      YcoordTxBl.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      YcoordTxBx.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+   End Sub
+
+   Private Sub ShowCoord()
+      Dim ptText As Point3d = m_ptPrev
+      ptText.ToLoc(New Frame3d(m_ptTabOri))
+      XcoordTxBx.Text = LenToString(ptText.x, 2)
+      YcoordTxBx.Text = LenToString(ptText.y, 2)
+   End Sub
+
+   Private Function SetMachineInCurrPos() As Boolean
+      ' Recupero la posizione macchina
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return False
+      ' Recupero il nome degli assi macchina
+      Dim sL1 As String = String.Empty
+      Dim sL2 As String = String.Empty
+      Dim sL3 As String = String.Empty
+      Dim sR1 As String = String.Empty
+      Dim sR2 As String = String.Empty
+      If Not m_MainWindow.m_CNCommunication.GetAxesNames(sL1, sL2, sL3, sR1, sR2) Then Return False
+      ' Visualizzo macchina in posizione
+      EgtSetAxisPos(sL1, dL1)
+      EgtSetAxisPos(sL2, dL2)
+      EgtSetAxisPos(sL3, dL3)
+      EgtSetAxisPos(sR1, dR1)
+      EgtSetAxisPos(sR2, dR2)
+      Return True
+   End Function
+
+End Class
+

DrawImport/AlzFrontUC.xaml

@@ -165,12 +165,13 @@
                 <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
+                <RowDefinition Height="0.55*"/>
+                <RowDefinition Height="0.55*"/>
+                <RowDefinition Height="0.55*"/>
                 <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <!--<RowDefinition Height="1*"/>-->
             </Grid.RowDefinitions>
 
+            <!-- Altezza delle alette --> 
             <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
                            Text="Offset"
                            Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
@@ -187,22 +188,36 @@
                                   Width="60" Height="30" Margin="0,0,0,0"
                                   Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             
-
+            <!-- Delta angolo (abilitato solo per i frontalini) -->
             <TextBlock Name="Parameter2TxBl" Grid.Row="1" Grid.ColumnSpan="2"
                        Text="Offset2"
                        Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                        FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <!-- temporaneamente disabilito la definizione delta angolo per alzatine  -->
             <EgtWPFLib:EgtTextBox Name="Parameter2ATxBx" 
+                                  IsEnabled="False"
+                                  Visibility="Collapsed"
                                   Grid.Column="2" Grid.Row="1"
                                   HorizontalAlignment="Right"
-                                  Width="60" Height="30" Margin="0,0,0,0"
+                                  Width="60" Height="30" Margin="0,0,0,0" IsLength="False"
                                   Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             <EgtWPFLib:EgtTextBox Name="Parameter2FTxBx" 
                                   Grid.Column="3" Grid.Row="1" 
                                   HorizontalAlignment="Right"
+                                  Width="60" Height="30" Margin="0,0,0,0" IsLength="False"
+                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
+            <!-- Spessore aletta -->
+            <TextBlock Name="Parameter5TxBl" Grid.Row="2" Grid.ColumnSpan="2"
+                       Text="Offset2"
+                       Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                       FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
+                                  Grid.Column="2" Grid.Row="2" 
+                                  HorizontalAlignment="Right"
                                   Width="60" Height="30" Margin="0,0,0,0"
                                   Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            
+
             <!--Gestisco nello spazio di una TextBox due TextBoxs--><!--
             <UniformGrid Rows="1" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Width="90" >
                 <EgtWPFLib:EgtTextBox Name="Parameter2aTxBx" 
@@ -236,7 +251,7 @@
                                   Width="85" Height="30"
                                   Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
             
-            <UniformGrid Columns="2" Grid.ColumnSpan="4" Grid.Row="2">
+            <UniformGrid Columns="2" Grid.ColumnSpan="4" Grid.Row="3">
                 <!--questo bottone è stato creato solo per garantire il corretto allinaemento-->
                 <Button Name="Vuoto" Visibility="Hidden"/>
                 <!--Bottone per tornare indietro alla selezione di CompoInterni e Alz&Front-->

DrawImport/AlzFrontUC.xaml.vb

@@ -20,6 +20,7 @@ Public Class AlzFrontUC
 
    ' nome della info riferita alle alzatine e ai frontalini (1=Alz, 2=Front, 0=niente)
    Private Const INFO_ALZFRONT As String = "AF"
+   Private Const INFO_ENABLE As String = "EnableAF"
 
    ' Properties 
    Private m_sCompoDir As String = String.Empty
@@ -75,8 +76,9 @@ Public Class AlzFrontUC
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
 
       ' nome dei parametri condivisi
-      Parameter1TxBl.Text = "Altezza"
-      Parameter2TxBl.Text = "Delta angolo"
+      Parameter1TxBl.Text = EgtMsg(91134)
+      Parameter2TxBl.Text = EgtMsg(91135)
+      Parameter5TxBl.Text = EgtMsg(91136)
 
       EgtZoom(ZM.ALL)
    End Sub
@@ -94,10 +96,17 @@ Public Class AlzFrontUC
       Dim LabelId As Integer = GDB_ID.NULL
 
       ' definisco i valori delle altezza e degli angoli di spoglia per le alzatine e i frontalini (letti da file ini del programma)
-      GetPrivateProfileString(S_ALZFRONT, K_ALZ_HEIGHT, "0", Parameter1ATxBx.Text, m_MainWindow.GetIniFile)
-      GetPrivateProfileString(S_ALZFRONT, K_FRONT_HEIGHT, "0", Parameter1FTxBx.Text, m_MainWindow.GetIniFile)
+      Dim sVal As String = String.Empty
+      Dim dVal As Double = 0
+      GetPrivateProfileString(S_ALZFRONT, K_ALZ_HEIGHT, "0", sVal, m_MainWindow.GetIniFile)
+      Utility.StringToDouble(sVal, dVal)
+      Parameter1ATxBx.Text = Utility.LenToString(dVal, 4)
+      GetPrivateProfileString(S_ALZFRONT, K_FRONT_HEIGHT, "0", sVal, m_MainWindow.GetIniFile)
+      Utility.StringToDouble(sVal, dVal)
+      Parameter1FTxBx.Text = Utility.LenToString(dVal, 4)
       GetPrivateProfileString(S_ALZFRONT, K_ALZ_DELTA_ANG, "0", Parameter2ATxBx.Text, m_MainWindow.GetIniFile)
       GetPrivateProfileString(S_ALZFRONT, K_FRONT_DELTA_ANG, "0", Parameter2FTxBx.Text, m_MainWindow.GetIniFile)
+      Parameter5TxBx.Text = Utility.LenToString(m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight, 2)
 
       ' Imposto contesto corrente
       EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
@@ -138,31 +147,41 @@ Public Class AlzFrontUC
 
       ' inserisco il lato nella lista 
       While CurrLine <> GDB_ID.NULL
-         ' escludo tutte le forme che non sono delle linee
-         If EgtGetType(CurrLine) = GDB_TY.CRV_LINE Then
-            ' Aggiungo il lato alla lista di quelli su cui è possibile mettere una alzatina o un frontalino
-            Dim sNameCurrLine As String = String.Empty
-            Dim nInfo As Integer = 0
-            Dim dSideAng As Integer = 0
-            EgtSetName(CurrLine, "A" & nEntityIndex.ToString)
-            EgtGetName(CurrLine, sNameCurrLine)
-            ' inserisco la numerazione dei lati della figura
-            AddTextToLine(sNameCurrLine, LabelId, CurrLine, 20, m_dBBoxRad, True)
-            ' recupero l'informazione 
-            EgtGetInfo(CurrLine, INFO_ALZFRONT, nInfo)
-            If nInfo = 1 Then
-               AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.ALZATINA))
-            ElseIf nInfo = 2 Then
-               AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.FRONTALINO))
-            Else
-               AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine))
-            End If
-            nEntityIndex += 1
-         Else
-            EgtSetName(CurrLine, "B" & nOtherIndex.ToString)
-            nOtherIndex = nOtherIndex + 1
-         End If
+         Dim NextId As Integer = EgtGetNext(CurrLine)
+         If NextId = GDB_ID.NULL Then NextId = EgtGetFirstInGroup(LoopId)
+         If VerifySideAnglePossible(PrevLine, CurrLine, NextId, bOutLoop) Then
 
+            If ApprovedSideToAlzFront(CurrLine) Then
+               ' Aggiungo il lato alla lista di quelli su cui è possibile mettere una alzatina o un frontalino
+               Dim sNameCurrLine As String = String.Empty
+               Dim nInfo As Integer = 0
+               Dim dSideAng As Integer = 0
+               EgtSetName(CurrLine, "A" & nEntityIndex.ToString)
+               EgtGetName(CurrLine, sNameCurrLine)
+               ' inserisco la numerazione dei lati della figura
+               AddTextToLine(sNameCurrLine, LabelId, CurrLine, 20, m_dBBoxRad, True)
+               ' recupero l'informazione 
+               EgtGetInfo(CurrLine, INFO_ALZFRONT, nInfo)
+               If nInfo = 1 Then
+                  AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.ALZATINA))
+               ElseIf nInfo = 2 Then
+                  AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.FRONTALINO))
+               Else
+                  AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine))
+               End If
+               ' inserisco riferimento univoco al lato (solo se non esiste)
+               Dim sInfoRef As String = String.Empty
+               EgtGetInfo(CurrLine, "RefAF", sInfoRef)
+               If String.IsNullOrEmpty(sInfoRef) Then
+                  Dim sRefGUID As String = System.Guid.NewGuid().ToString()
+                  EgtSetInfo(CurrLine, "RefAF", sRefGUID)
+               End If
+               nEntityIndex += 1
+            Else
+               EgtSetName(CurrLine, "B" & nOtherIndex.ToString)
+               nOtherIndex = nOtherIndex + 1
+            End If
+         End If
          PrevLine = CurrLine
          CurrLine = EgtGetNext(CurrLine)
       End While
@@ -266,6 +285,26 @@ Public Class AlzFrontUC
       bInternalSelection = False
    End Sub
 
+   ' restituisce vero se il lato possiede delle info legate al sideangle
+   Private Function VerifyIsThereSideAngle(nCurrLine As Integer) As Boolean
+      Dim dSideAngle As Double
+      return EgtGetInfo(nCurrLine, INFO_SIDE_ANGLE, dSideAngle)
+   End Function
+
+   ' restituisce vero se il lato possiede delle info legate alle alette
+   Private Function VerifyIsThereAlzFront(nCurrLine As Integer) As Boolean
+      Dim nAlzFront As Integer
+      return EgtGetInfo(nCurrLine, INFO_ALZFRONT, nAlzFront) AndAlso nAlzFront <> 0
+   End Function
+
+   ' approvo la costruzione dell'aletta sul lato indicato
+   Private Function ApprovedSideToAlzFront(nCurrLine As Integer) As Boolean
+      If VerifyIsThereSideAngle(nCurrLine) And Not VerifyIsThereAlzFront(nCurrLine) Then
+         ' se esiste SideAngle e un'aletta allora NON approvo
+         Return False
+      End If
+      Return True
+   End Function
 
    ' Permette di aggiugere accanto alla linea passata
    Friend Function AddTextToLine(sText As String, TextLayer As Integer, CurrLine As Integer, dDistance As Double,
@@ -574,9 +613,9 @@ Public Class AlzFrontUC
    Private Sub ParameterA1TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter1ATxBx.EgtClosed
       ' Nuovo angolo di inclinazione
       Dim dValue As Double
-      StringToDouble(Parameter1ATxBx.Text, dValue)
+      StringToLen(Parameter1ATxBx.Text, dValue)
       ' salvo il valore nel file ini e inserisco il valore nel file lua
-      WritePrivateProfileString("Alz&Front", "A_Height", Parameter1ATxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString("Alz&Front", "A_Height", DoubleToString(dValue, 3), m_MainWindow.GetIniFile())
       ' aggiorno il disegno
       LoadCurrentCompo()
    End Sub
@@ -585,9 +624,9 @@ Public Class AlzFrontUC
    Private Sub Parameter1FTxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter1FTxBx.EgtClosed
       ' Nuovo angolo di inclinazione
       Dim dValue As Double
-      StringToDouble(Parameter1FTxBx.Text, dValue)
+      StringToLen(Parameter1FTxBx.Text, dValue)
       ' salvo il valore nel file ini e inserisco il valore nel file lua
-      WritePrivateProfileString("Alz&Front", "F_Height", Parameter1FTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString("Alz&Front", "F_Height", DoubleToString(dValue, 3), m_MainWindow.GetIniFile())
       ' aggiorno il disegno
       LoadCurrentCompo()
    End Sub
@@ -614,6 +653,13 @@ Public Class AlzFrontUC
       LoadCurrentCompo()
    End Sub
 
+   Private Sub Parameter5TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter5TxBx.EgtClosed
+      Dim dValue As Double
+      StringToDouble(Parameter5TxBx.Text, dValue)
+      ' aggiorno il disegno
+      LoadCurrentCompo()
+   End Sub
+
 #End Region    ' Altezza, delta angolo di spoglia
 
 #Region "METHODS"
@@ -749,6 +795,9 @@ Public Class AlzFrontUC
       If StringToLen(Parameter2FTxBx.Text, dVal) Then
          EgtLuaSetGlobNumVar("CMP.F_DeltaAng", dVal)
       End If
+      If StringToLen(Parameter5TxBx.Text, dVal) Then
+         EgtLuaSetGlobNumVar("CMP.ThicknessRaw", dVal)
+      End If
       ' parametri per la scrittura dei caratteri
       EgtLuaSetGlobNumVar("CMP.BBoxRad", m_dBBoxRad)
       EgtLuaSetGlobNumVar("CMP.HeightText", m_dH)

DrawImport/CompoDimensionUC.xaml.vb

@@ -37,7 +37,7 @@ Public Class CompoDimensionUC
       InternComponentBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 47)     ' Componenti interni
       If Not String.IsNullOrEmpty(sCompoDir) Then
          bEnableAlzFront = True
-         AlzFrontBtn.Content = "Alzatine & Frontalini"
+         AlzFrontBtn.Content = EgtMsg(91137)
       Else
          AlzFrontBtn.Visibility = Visibility.Collapsed
       End If
@@ -75,6 +75,7 @@ Public Class CompoDimensionUC
          m_DrawPage.sCompoName.StartsWith("PBagno") Then
          ShowInternalBtn(True)
          ShowAlzFrontBtn(bEnableAlzFront)
+         m_DrawPage.MessageGrid.Visibility = Visibility.Hidden
       Else
          ShowInternalBtn(False)
          ShowAlzFrontBtn(False)
@@ -106,8 +107,10 @@ Public Class CompoDimensionUC
    Friend Sub ShowAlzFrontBtn(ByVal value As Boolean)
       If value Then
          AlzFrontBtn.Visibility = Visibility.Visible
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Hidden
       Else
          AlzFrontBtn.Visibility = Visibility.Hidden
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Visible
       End If
    End Sub
 
@@ -336,6 +339,7 @@ Public Class CompoDimensionUC
             Dim nCmpInfo As Integer = 0
             If EgtGetInfo(nId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
                EgtSetStatus(nId, GDB_ST.OFF)
+               UpdateInLoopReference(nCmp)
                Exit While
             End If
             nId = EgtGetNextName(nId, "HoleLabels")
@@ -379,5 +383,42 @@ Public Class CompoDimensionUC
       EgtDraw()
    End Sub
 
+   Private Sub UpdateInLoopReference(nCmp As Integer)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               Dim LocalList As New List(Of Integer) From {nIdInLoop}
+               m_DrawPage.m_FiloTopUC.CreateFiloTopPreView(LocalList)
+               EgtSetStatus(nLayFiloTop, GDB_ST.ON_)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
+   ' riceve la info "ID" della componente
+   Public Sub SetStatusVisibilityInLoopReference(nCmp As Integer, Status As GDB_ST)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               EgtSetStatus(nLayFiloTop, Status)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
 #End Region    ' METHODS for InternalCompo
 End Class

DrawImport/CompoTrfData.xaml.vb

@@ -24,6 +24,7 @@ Public Class CompoTrfData
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       DialogResult = True
+      SaveData()
       Close()
    End Sub
 
@@ -32,7 +33,30 @@ Public Class CompoTrfData
       Close()
    End Sub
 
+   Private Sub SaveData()
+      WritePrivateProfileString(S_TRF, K_ORDCODE, OrdCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_ORDDESC, OrdDescTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_PARTCODE, PartCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_MATCODE, MatCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_SURFCODE, SurfCodeTxBx.Text, m_MainWindow.GetIniFile())
+      ' prima di salvare lo spessore converto in mm e poi di nuovo in stringa
+      Dim dVal As Double = 0
+      StringToLen(ThicknessTxBx.Text, dVal)
+      WritePrivateProfileString(S_TRF, K_TRFTHICKNESS, DoubleToString(dVal, 4), m_MainWindow.GetIniFile())
+   End Sub
+
    Friend Sub SetData(sOrdCode As String, sOrdDesc As String, sPartCode As String, sMatCode As String, sSurfCode As String, dTh As Double)
+      ' se verifico che non sono stati iniziliazzti i campi allora provvedo a leggere il file ini del programma
+      If sOrdCode = "" And sOrdDesc = "" And sPartCode = "" And sMatCode = "" And sSurfCode = "" Then
+         GetPrivateProfileString(S_TRF, K_ORDCODE, sOrdCode, sOrdCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_ORDDESC, sOrdDesc, sOrdDesc, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_PARTCODE, sPartCode, sPartCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_MATCODE, sMatCode, sMatCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_SURFCODE, sSurfCode, sSurfCode, m_MainWindow.GetIniFile())
+         ' recupero il dato dello spessore che deve essere in mm
+         dTh = GetPrivateProfileDouble(S_TRF, K_TRFTHICKNESS, dTh, m_MainWindow.GetIniFile())
+      End If
+      ' inizializzo i campi della finestra
       OrdCodeTxBx.Text = sOrdCode
       OrdDescTxBx.Text = sOrdDesc
       PartCodeTxBx.Text = sPartCode

DrawImport/DrawPageUC.xaml

@@ -64,7 +64,7 @@
                <ToggleButton Name="DimensionBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowToggleButton}" Visibility="Collapsed"/>
             </Grid>
 
-            <Grid Name="VariablesGrd" Grid.Row="1" Grid.ColumnSpan="2"/>
+            <Grid Name="VariablesGrd" Grid.Row="1" Grid.RowSpan="2" Grid.ColumnSpan="2"/>
             
             <Grid Name="MessageGrid" Grid.Row="2" Grid.ColumnSpan="2">
                <TextBlock Name="MessageTxBl" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
@@ -124,7 +124,7 @@
 
             <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"
                TextAlignment="Right"/>
-            <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60"
+            <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
             </Grid>

DrawImport/DrawPageUC.xaml.vb

@@ -41,6 +41,9 @@ Public Class DrawPageUC
    Friend m_bDrawOk As Boolean = False
    Private m_bFirst As Boolean = True
 
+   Private m_SelListHole As New List(Of Integer)
+   Private m_DeselectListHole As New List(Of Integer)
+
    ' questa variabile serve per risalire al nome della componente che ospita i componenti interni att
    Friend m_sMainCompo As String = String.Empty
 
@@ -105,6 +108,9 @@ Public Class DrawPageUC
          Return m_nSelectedLayer
       End Get
    End Property
+   Public Sub SetCurrLayer(ByVal nCurrLayer As Integer)
+      m_nSelectedLayer = nCurrLayer
+   End Sub
 
    Enum Pages
       MainComponent
@@ -277,6 +283,19 @@ Public Class DrawPageUC
       m_sCsvOrder = ""
       m_sCsvList = ""
       m_sCsvName = ""
+
+      ' Visuliazzazione dei bottoni per modifica dei componenti
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         SideAngleBtn.Visibility = Visibility.Hidden
+         FiloTopBtn.Visibility = Visibility.Hidden
+         EngraveBtn.Visibility = Visibility.Hidden
+         DripCutBtn.Visibility = Visibility.Hidden
+      Else
+         SideAngleBtn.Visibility = Visibility.Visible
+         FiloTopBtn.Visibility = Visibility.Visible
+         EngraveBtn.Visibility = Visibility.Visible
+         DripCutBtn.Visibility = Visibility.Visible
+      End If
    End Sub
 
    ' recupero il click sulla scena ed assegno il metodo a secondo della pagina aperta
@@ -357,6 +376,8 @@ Public Class DrawPageUC
          Dim nCmpInfo As Integer = 0
          If EgtGetInfo(nHLId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
             EgtSetStatus(nHLId, GDB_ST.ON_)
+            ' nascondo eventuali FiloTop
+            m_CompoDimension.SetStatusVisibilityInLoopReference(nCmp, GDB_ST.OFF)
             Exit While
          End If
          nHLId = EgtGetNextName(nHLId, "HoleLabels")
@@ -459,21 +480,25 @@ Public Class DrawPageUC
                   EgtDeselectObj(nId)
                   EgtDeselectObj(nLayId)
                   Dim sLayName As String = ""
-                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-                     EgtRemoveInfo( nLayId, INFO_FILOTOP)
-                     EgtRemoveInfo( nLayId, INFO_OFFSET)
-                     EgtRemoveInfo( nLayId, INFO_DEPTH)
-                     EgtResetColor( nLayId)
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+                     EgtRemoveInfo(nLayId, INFO_FILOTOP)
+                     EgtRemoveInfo(nLayId, INFO_OFFSET)
+                     EgtRemoveInfo(nLayId, INFO_DEPTH)
+                     EgtResetColor(nLayId)
                   End If
+                  m_DeselectListHole.Add(nLayId)
+                  m_SelListHole.Remove(nLayId)
                Else
                   Dim sLayName As String = ""
-                  If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
-                     EgtSelectObj( nId)
-                     EgtSelectObj( nLayId)
-                     EgtSetInfo( nLayId, INFO_FILOTOP, 1)
-                     EgtSetInfo( nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
-                     EgtSetInfo( nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
-                     EgtSetColor( nLayId, New Color3d(255, 255, 255))
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
+                     EgtSelectObj(nId)
+                     EgtSelectObj(nLayId)
+                     EgtSetInfo(nLayId, INFO_FILOTOP, 1)
+                     EgtSetInfo(nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
+                     EgtSetInfo(nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
+                     EgtSetColor(nLayId, New Color3d(255, 255, 255))
+                     m_SelListHole.Add(nLayId)
+                     m_DeselectListHole.Remove(nLayId)
                   End If
                End If
                EgtDraw()
@@ -481,6 +506,8 @@ Public Class DrawPageUC
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      m_FiloTopUC.CreateFiloTopPreView(m_SelListHole)
+      m_FiloTopUC.EraseFiloTopPreview(m_DeselectListHole)
    End Sub
 
    Private Sub OnShowDistanceVector(sender As Object, vtDist As Vector3d) Handles DrawScene.OnShowDistanceVector
@@ -539,6 +566,7 @@ Public Class DrawPageUC
       OkBtn.IsEnabled = True
    End Sub
 
+   ' Navigazione nelle due pagine per la selezione dei componenti da disegnare
    Friend Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       DrawPage_Unloaded(sender, e)
@@ -630,10 +658,17 @@ Public Class DrawPageUC
          m_CompoDimension.GetNameEdit(j).Text = m_CVars(i - 1).m_sName
          m_CompoDimension.GetNameEdit(j).Visibility = Windows.Visibility.Visible
          m_CompoDimension.GetValueEdit(j).Text = m_CVars(i - 1).ToString()
+         'Dim dVal As Double
+         'StringToLen(m_CVars(i - 1).ToString(), dVal)
+         'm_CompoDimension.GetValueEdit(j).Text = LenToString(dVal, 3)
          m_CompoDimension.GetValueEdit(j).Visibility = Windows.Visibility.Visible
          If m_CVars(i - 1).m_nType = 5 Then
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).Keyboard = EgtTextBox.KeyboardType.Alphanumeric
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).KeyboardDimension = 600
+         ElseIf m_CVars(i - 1).m_nType = 4 Then
+            TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).Keyboard = EgtTextBox.KeyboardType.Calculator
+            TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).IsLength = False
+            TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).KeyboardDimension = 300
          Else
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).Keyboard = EgtTextBox.KeyboardType.Calculator
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).KeyboardDimension = 300
@@ -879,6 +914,9 @@ Public Class DrawPageUC
 
    ' permette di inserire più di un part
    Private Function MakeMultipleInsert(ByVal nNbr As Integer, sName As String) As Boolean
+
+      Dim InsertColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
+
       ' Imposto il contesto corrente
       EgtSetCurrentContext(DrawScene.GetCtx())
       Dim Pz As Integer = -1
@@ -887,11 +925,12 @@ Public Class DrawPageUC
       ' Cancello layer regioni per selezione buchi
       Pz = EgtGetFirstGroupInGroup(GDB_ID.ROOT)
 
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As String = String.Empty
+
       While Pz <> -1
          ' imposto il contesto corrente
          EgtSetCurrentContext(DrawScene.GetCtx())
-         ' salvo il file temporaneo per studio delle alzatine
-         EgtSaveFile("c:\EgtData\OmagCUT\Temp\TempAlzatine.nge", NGE.CMPTEXT)
          ' cerco un altro pezzo nell'elenco
          NxtPz = EgtGetNextPart(Pz)
 
@@ -1014,11 +1053,20 @@ Public Class DrawPageUC
          SideAngle.WriteSideAngleForNest(DrawScene.GetCtx())
          ' Imposto colore testi
          Utility.SetTextColor(nRegLayId)
+         ' Imposto il colore del pezzo inserito nel progetto
+         EgtSetColor(nRegLayId, InsertColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType( EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
+            EntId = EgtGetNext(EntId)
+         End While
+
          ' Esporto il pezzo in un file temporaneo
          Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\FlatPartCompo.Nge"
          If Not EgtSaveObjToFile(Pz, sTmpFile, NGE.BIN) Then
             Return False
          End If
+
          ' Passo al contesto principale
          EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
          ' Recupero flag per inserimento diretto in grezzo (altrimenti in parcheggio)
@@ -1027,6 +1075,11 @@ Public Class DrawPageUC
          EgtEraseEmptyParts()
          ' Area dei nuovi pezzi
          Dim dNewArea As Double = 0
+
+         If nNbr > 1 Then
+            sGUICode = System.Guid.NewGuid.ToString
+         End If
+
          ' Se esiste il file del pezzo
          If My.Computer.FileSystem.FileExists(sTmpFile) Then
             ' eseguo inserimento
@@ -1041,15 +1094,33 @@ Public Class DrawPageUC
                If m_bTrfData Then EgtSetInfo(nId2, "CsvPart", m_TrfOrderCode & "-" & nId2.ToString())
                ' Aggiorno l'area dei nuovi pezzi
                dNewArea += GeomCalc.GetPartArea(nId2)
-               ' Inserisco in parcheggio
+
+               ' assegno l'identificatico del pezzo, se esiste
+               If Not String.IsNullOrEmpty(sGUICode) Then
+                  Dim sPreGuid As String = CreatePreGuidCode(nId2)
+                  EgtSetInfo(nId2, INFO_REFGROUP, sPreGuid & sGUICode)
+               End If
+               ' muovo il pezzo nella prima posizione di parcheggio libera
                m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId2, True)
-               ' Se richiesto posizionamento diretto, lo eseguo
-               If bDirect Then
-                  If m_MainWindow.m_CadCutPageUC.m_NestPage.InsertOnePart(nId2) Then
-                     ' Eventuale notifica al VeinMatching
-                     VeinMatching.OnInsertPartInRaw(nId2)
+
+               ' ------------------------ AGGIUNGO PEZZO NEL VEINMATCH ----------------------------------
+               ' verifico che il pezzo sia un Piano Cucina o un Piano Bagno o un'Aletta
+               Dim sCMP As String = String.Empty
+               EgtGetInfo(nId2, "CMP", sCMP)
+               If sCMP.StartsWith("PCucina") Or sCMP.StartsWith("PBagno") Or sCMP.StartsWith("AlzFront") Then
+                  ' Aggiungo riferimento e lo inserisco in VeinMatching
+                  VeinMatching.SetRefOnPart(nId2)
+                  VeinMatching.AddPartFromDraw(nId2)
+                  ' Se richiesto posizionamento diretto, lo eseguo
+                  If bDirect Then
+                     If m_MainWindow.m_CadCutPageUC.m_NestPage.InsertOnePart(nId2) Then
+                        ' Eventuale notifica al VeinMatching
+                        VeinMatching.OnInsertPartInRaw(nId2)
+                     End If
                   End If
                End If
+               ' ------------------------ AGGIUNGO PEZZO NEL VEINMATCH ----------------------------------
+
             Next
             ' Cancello il file
             My.Computer.FileSystem.DeleteFile(sTmpFile)
@@ -1067,6 +1138,30 @@ Public Class DrawPageUC
       Return True
    End Function
 
+   Private Function MakeSectionFrameInsert() As Boolean
+      ' m_MainWindow.m_ImportPageUC.LoadFrame()
+      ' recupero il primo layer del primo pezzo
+      Dim nLayerId As Integer = EgtGetFirstLayer(EgtGetFirstPart())
+      If nLayerId = GDB_ID.NULL Then Return False
+      ' percorso in cui salvare tempora
+      Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\Frame.Nge"
+      If Not EgtSaveObjToFile(nLayerId, sTmpFile, NGE.BIN) Then Return False
+      ' Passo al contesto principale
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' Inserisco il pezzo
+      If Not My.Computer.FileSystem.FileExists(sTmpFile) Then Return False
+      EgtInsertFile(sTmpFile)
+      ' Ne recupero l'Id
+      Dim nPartId As Integer = EgtGetLastPart()
+      ' Creo la cornice
+      m_MainWindow.m_FrameCutPageUC.CreateFrame(nPartId)
+      ' Ricalcolo lavorazioni
+      AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
+      ' Cancello il file
+      My.Computer.FileSystem.DeleteFile(sTmpFile)
+      Return True
+   End Function
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_bBackFromInternalCompo = False
       m_bInternalCompo = False
@@ -1082,7 +1177,12 @@ Public Class DrawPageUC
       Dim InsNbr As Integer = Int32.Parse(PartNumTxBx.Text)
       ' Passo al contesto principale
       'MakeInsert(InsNbr, sPartName)
-      MakeMultipleInsert(InsNbr, sPartName)
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         MakeSectionFrameInsert()
+      Else
+         MakeMultipleInsert(InsNbr, sPartName)
+      End If
+
       ' Aggiorno ambiente principale
       EgtZoom(ZM.ALL)
       ' Elimino nome del componente precedente
@@ -1096,7 +1196,7 @@ Public Class DrawPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
 
    End Sub
 
@@ -1117,14 +1217,16 @@ Public Class DrawPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
    End Sub
 
    Private Sub TrfDataBtn_Click(sender As Object, e As RoutedEventArgs) Handles TrfDataBtn.Click
       If m_bTrfData Then
          Dim DlgTrfData As New CompoTrfData(m_MainWindow)
+         ' carico i dati appena salvati nella pagina
          DlgTrfData.SetData(m_TrfOrderCode, m_TrfOrderDesc, m_TrfPartCode, m_TrfMatCode, m_TrfSurfCode, m_TrfThickness)
          If DlgTrfData.ShowDialog() Then
+            ' recupero i dati salvati nella pagina
             DlgTrfData.GetData(m_TrfOrderCode, m_TrfOrderDesc, m_TrfPartCode, m_TrfMatCode, m_TrfSurfCode, m_TrfThickness)
          End If
       ElseIf m_bCsvData Then
@@ -1203,6 +1305,8 @@ Public Class DrawPageUC
    Private Sub EngraveBtn_Click(sender As Object, e As RoutedEventArgs) Handles EngraveBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       If EngraveBtn.IsChecked Then
+         ' Aumento lo spazio disponibile per inserirei i parametri (tolgo spazio ad eventuali messaggi)
+         Grid.SetRowSpan(VariablesGrd, 2)
          ' Imposto modalità
          m_SideAngleUC.m_Mode = SideAngleUC.ModeOpt.ENGRAVE
          If m_ActiveComponentPage = Pages.CompoDimension Then
@@ -1234,6 +1338,7 @@ Public Class DrawPageUC
          EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
          EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
       Else
+         Grid.SetRowSpan(VariablesGrd, 2)
          VariablesGrd.Children.Remove(m_SideAngleUC)
          If m_PrevSideAnglePage = Pages.CompoDimension Then
             VariablesGrd.Children.Add(m_CompoDimension)
@@ -1323,6 +1428,8 @@ Public Class DrawPageUC
    End Sub
 
    Private Sub FiloTopBtn_Click(sender As Object, e As RoutedEventArgs) Handles FiloTopBtn.Click
+      m_SelListHole.Clear()
+      m_DeselectListHole.Clear()
       m_SceneButtons.MeasureBtn.IsChecked = False
       If FiloTopBtn.IsChecked Then
          ' Imposto modalità
@@ -1336,25 +1443,25 @@ Public Class DrawPageUC
             m_PrevSideAnglePage = Pages.AlzFront
             LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
          End If
-         VariablesGrd.Children.Add( m_FiloTopUC)
+         VariablesGrd.Children.Add(m_FiloTopUC)
          SideAngleBtn.IsEnabled = False
          EngraveBtn.IsEnabled = False
          DripCutBtn.IsEnabled = False
          MessageGrid.Visibility = Windows.Visibility.Hidden
          BackBtn.Visibility = Windows.Visibility.Hidden
-         MessageTxBx.Text = EgtMsg( MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+         MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
          ' In ogni caso, nascondo layer delle misure
-         Dim PartId As Integer = EgtGetFirstInGroup( GDB_ID.ROOT)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_AUX), GDB_ST.OFF)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
+         Dim PartId As Integer = EgtGetFirstInGroup(GDB_ID.ROOT)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_AUX), GDB_ST.OFF)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
       Else
-         VariablesGrd.Children.Remove( m_FiloTopUC)
+         VariablesGrd.Children.Remove(m_FiloTopUC)
          If m_PrevSideAnglePage = Pages.CompoDimension Then
-            VariablesGrd.Children.Add( m_CompoDimension)
+            VariablesGrd.Children.Add(m_CompoDimension)
          ElseIf m_PrevSideAnglePage = Pages.InternalComponent Then
-            LeftButtonGrd.Children.Add( m_CompoDimension.m_InternalCompoPage)
+            LeftButtonGrd.Children.Add(m_CompoDimension.m_InternalCompoPage)
          End If
          SideAngleBtn.IsEnabled = m_bEnableSideAngle
          EngraveBtn.IsEnabled = True
@@ -1428,7 +1535,10 @@ Public Class DrawPageUC
             Case 2        ' intero
                Return m_nVal.ToString()
             Case 3        ' lunghezza
-               Return DoubleToString(EgtToUiUnits(m_dVal), 4)
+               'Dim dVal As Double
+               'StringToLen(m_sVal, dVal)
+               Return LenToString(m_dVal, 4)
+               'Return DoubleToString(EgtToUiUnits(m_dVal), 4)
             Case 4        ' double
                Return DoubleToString(m_dVal, 4)
             Case 5        ' stringa
@@ -1453,12 +1563,13 @@ Public Class DrawPageUC
                End If
             Case 3        ' lunghezza
                Dim dVal As Double
-               If StringToDouble(sVal, dVal) Then
-                  If bConvertUnits Then
-                     m_dVal = EgtFromUiUnits(dVal)
-                  Else
-                     m_dVal = dVal
-                  End If
+               If bConvertUnits Then
+                  StringToLen(sVal, dVal)
+                  m_dVal = dVal
+                  Return True
+               Else
+                  StringToDouble(sVal, dVal)
+                  m_dVal = dVal
                   Return True
                End If
             Case 4        ' double

DrawImport/FiloTopUC.xaml

@@ -41,7 +41,11 @@
                FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
       <EgtWPFLib:EgtTextBox Name="Parameter2TxBx" Grid.Column="1" Grid.Row="11" Width="90"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-
-   </Grid>
+      <TextBlock Name="Parameter3TxBl" Grid.Row="12" Text="Arrotonda"
+               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+      <CheckBox Name="Parameter3ChBx" Grid.Row="12" Grid.Column="1" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Center" Margin="0,0,6,0"/>
+    </Grid>
 
 </UserControl>

DrawImport/FiloTopUC.xaml.vb

@@ -7,6 +7,8 @@ Public Class FiloTopUC
    ' Riferimento alla pagina che ha aperto SideAngleUC
    Private m_CallingPage As MainWindow.Pages
 
+   Private m_SelList As New List(Of Integer)
+
    ' Offset della sfilettatura
    Private m_dFiloTopOffset As Double = 0
    Friend ReadOnly Property FiloTopOffset As Double
@@ -23,6 +25,13 @@ Public Class FiloTopUC
       End Get
    End Property
 
+   ' esegue l'arrotindamento sugli angoli del percorso utensile
+   Private m_bCornerradius As Boolean = False
+   Friend ReadOnly Property bCornerRadius As Boolean
+      Get
+         Return m_bCornerradius
+      End Get
+   End Property
 
    Private Sub FiloTopUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Imposto riferimenti ad altre pagine
@@ -30,7 +39,8 @@ Public Class FiloTopUC
 
       ' Imposto messaggi
       ParameterTxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 10)       ' Offset
-      Parameter2TxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter2TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter3TxBl.Text = EgtMsg(91138)
 
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Imposto questa come pagina correntemente visualizzata nella drawpage
@@ -43,14 +53,18 @@ Public Class FiloTopUC
       End If
 
       ' Gestisco visualizzazione dei parametri
-      Parameter2TxBl.Visibility = Windows.Visibility.Visible
+      ParameterTxBl.Visibility = Windows.Visibility.Visible
       Parameter2TxBx.Visibility = Windows.Visibility.Visible
+      Parameter3TxBl.Visibility = Windows.Visibility.Visible
 
       ' Aggiorno valori
       m_dFiloTopOffset = GetPrivateProfileDouble( S_SIDES, K_FILOTOPOFFSET, 5, m_MainWindow.GetIniFile())
       ParameterTxBx.Text = LenToString( m_dFiloTopOffset, 3)
       m_dFiloTopDepth = GetPrivateProfileDouble( S_SIDES, K_FILOTOPDEPTH, 5, m_MainWindow.GetIniFile())
-      Parameter2TxBx.Text = LenToString( m_dFiloTopDepth, 3)
+      Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
+      m_bCornerradius = GetPrivateProfileInt(S_SIDES, K_ROUNDOFF, 0, m_MainWindow.GetIniFile()) <> 0
+      Parameter3ChBx.IsChecked = m_bCornerradius
+      m_SelList.Clear()
    End Sub
 
    Private Sub FiloTopUC_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
@@ -74,6 +88,8 @@ Public Class FiloTopUC
          End While
          nPartId = EgtGetNextPart(nPartId)
       End While
+      ' aggiorno la preview
+      CreateFiloTopPreView(m_SelList, False)
    End Sub
 
    Private Sub Parameter2TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter2TxBx.EgtClosed
@@ -95,4 +111,161 @@ Public Class FiloTopUC
       End While
    End Sub
 
+   Private Sub Parameter3ChBx_Checked() Handles Parameter3ChBx.Click
+      ' Assegno il valore
+      m_bCornerradius = Parameter3ChBx.IsChecked
+      WritePrivateProfileString(S_SIDES, K_ROUNDOFF, If(m_bCornerradius, "1", "0"), m_MainWindow.GetIniFile())
+      ' Aggiorno le info del profilo
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_ROUNDOFF, If(m_bCornerradius, 1, 0))
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      ' aggiorno la preview (False = blocco la lettura dei dati della componente)
+      CreateFiloTopPreView(m_SelList, False)
+   End Sub
+
+   Public Sub CreateFiloTopPreView(SelList As List(Of Integer), Optional bReadInfo As Boolean = True)
+      m_SelList = SelList
+      If m_SelList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            ' verifico che lemento corrente appartenga all'elenco degli elementi selezionati
+            Dim bIsSelected As Boolean = m_SelList.Find(Function(value As Integer)
+                                                           Return value = nLayId
+                                                        End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' verifico il Layer "FiloTop" sia associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer "FiloTop"
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' lo creo
+                  nLayFiloTop = EgtCreateGroup(nPartId)
+                  EgtSetName(nLayFiloTop, "FiloTop")
+                  EgtSetInfo(nLayFiloTop, "InLoopRef", nLayId)
+                  EgtSetInfo(nLayId, "FiloTopRef", nLayFiloTop)
+               End If
+
+               ' carico i dati del filo top selezionato
+               If bReadInfo Then
+                  EgtGetInfo(nLayFiloTop, INFO_OFFSET, m_dFiloTopOffset)
+                  ParameterTxBx.Text = LenToString(m_dFiloTopOffset, 3)
+                  EgtGetInfo(nLayFiloTop, INFO_DEPTH, m_dFiloTopDepth)
+                  Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
+                  Dim nVal As Integer = If(m_bCornerradius, 1, 0)
+                  EgtGetInfo(nLayFiloTop, INFO_ROUNDOFF, nVal)
+                  Parameter3ChBx.IsChecked = If(nVal = 1, True, False)
+                  m_bCornerradius = Parameter3ChBx.IsChecked
+               End If
+
+               ' procedo alla creazione della curva
+               Dim nIdCompoCurve As Integer = GDB_ID.NULL
+               ' cancello un eventuale curva composita creata in precedenza
+               nIdCompoCurve = EgtGetFirstNameInGroup(nLayFiloTop, "OffsetPreView")
+               If nIdCompoCurve <> GDB_ID.NULL Then
+                  EgtErase(nIdCompoCurve)
+               End If
+               Dim nCompoCurve As New List(Of Integer)
+               ' costruisco il percorso chiuso dati i lati di contorno 
+               Dim nLine As Integer = EgtGetFirstInGroup(nLayId)
+               While nLine <> GDB_ID.NULL
+                  nCompoCurve.Add(nLine)
+                  nLine = EgtGetNext(nLine)
+               End While
+               Dim PtNearStart As Point3d
+               Dim nInfoRoundOff As Integer = If(m_bCornerradius, 1, 0)
+
+               nIdCompoCurve = EgtCreateCurveCompoByChain(nLayFiloTop, nCompoCurve.ToArray, PtNearStart, False)
+               EgtSetName(nIdCompoCurve, "OffsetPreView")
+
+               ' salvo i dati nel layer FiloTop
+               EgtSetInfo(nLayFiloTop, INFO_OFFSET, m_dFiloTopOffset)
+               EgtSetInfo(nLayFiloTop, INFO_DEPTH, m_dFiloTopDepth)
+               EgtSetInfo(nLayFiloTop, INFO_ROUNDOFF, nInfoRoundOff)
+
+               Dim bOk As Boolean = False
+               ' leggo che tipo di offset applicare (Round, Extend)
+               If nInfoRoundOff <> 1 Then
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dFiloTopOffset, OFF_TYPE.EXTEND)
+               Else
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dFiloTopOffset, OFF_TYPE.FILLET)
+               End If
+
+               ' se la generazione della curva non va a buon fine
+               If Not bOk Then
+                  EgtErase(nLayFiloTop)
+                  EgtRemoveInfo(nLayId, "FiloTopRef")
+                  EgtOutLog("Error in generation OffsetPreView in TopEgde ")
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+               nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+   ' riceve la lista dei LayerFiloTop che devono essere eliminati
+   Public Sub EraseFiloTopPreview(EraseList As List(Of Integer))
+      Dim m_EraseList As List(Of Integer) = EraseList
+      If m_EraseList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            Dim bIsSelected As Boolean = m_EraseList.Find(Function(value As Integer)
+                                                             Return value = nLayId
+                                                          End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' cerco il Layer associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' esco 
+                  Return
+               Else
+                  ' lo elimino
+                  EgtErase(nLayFiloTop)
+                  EraseList.Remove(nLayId)
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+
 End Class

DrawImport/ImportPageUC.xaml

@@ -49,15 +49,28 @@
             <Grid.RowDefinitions>
                <RowDefinition Height="0.5*"/>
                <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="8*"/>
+               <RowDefinition Height="7.25*"/>
+               <RowDefinition Height="0.75*"/>
                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
             <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
             <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
-                ItemsSource="{Binding ItemList}"/>
+                     ItemsSource="{Binding ItemList}"/>
 
-            <Border Name="MessageBrd" Grid.Row="4" BorderThickness="0,1,0,0" BorderBrush="Gray">
+                <Grid Grid.Row="3" Margin="0,0,8,0">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="4*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <EgtWPFLib:EgtTextBox Name="FindTxBx" Grid.Column="0"
+                               Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}"/>
+                    <Button Name="ClearFindBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Margin="0,6,2,6">
+                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}" Width="30" />
+                    </Button>
+                </Grid> 
+            
+            <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
                <TextBlock Name="MessageTxBx" TextAlignment="Center"
                    Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
             </Border>
@@ -101,7 +114,7 @@
 
                <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
                   TextAlignment="Right"/>
-               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60"
+               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             </Grid>
 

DrawImport/ImportPageUC.xaml.vb

@@ -297,6 +297,36 @@ Public Class ImportPageUC
       End Select
    End Sub
 
+   Private Sub FindTxBx_EgtClosed(sender As Object, e As EventArgs) Handles FindTxBx.EgtClosed
+      ' Elimino spazi iniziali e finali
+      FindTxBx.Text = FindTxBx.Text.Trim()
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      Dim UpdateListFile As New List(Of IconListBoxItem)
+      ' Se esiste un nome
+      If Not String.IsNullOrWhiteSpace(FindTxBx.Text) Then
+         For Each Item As IconListBoxItem In FileListBox.ItemsSource
+            If Item.Name.ToLower.Contains(FindTxBx.Text.ToLower) Then
+               UpdateListFile.Add(Item)
+            End If
+         Next
+      End If
+      If UpdateListFile.Count > 0 Then
+         FileListBox.ItemsSource = UpdateListFile
+      Else
+         FileListBox.ItemsSource = m_MainWindow.m_ImportItemList
+      End If
+   End Sub
+
+   Private Sub ClearFindBtn_Click() Handles ClearFindBtn.Click
+      ' svuoto la text
+      FindTxBx.Text = ""
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      ' e aggiorno la lista dei file
+      FileListBox.ItemsSource = m_MainWindow.m_ImportItemList
+   End Sub
+
    Private Function ClearView() As Boolean
       ' Pulisco il DB geometrico locale
       EgtNewFile()
@@ -576,6 +606,36 @@ Public Class ImportPageUC
       End If
    End Sub
 
+   ' metodo utilizzato per definire il colore dei pezzi DXF importati
+   Private Sub ColorRegion(nCtx As Integer)
+
+      ' Leggo dati corrispondenza colore
+      Dim InsertColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
+
+      ' Imposto contesto corrente
+      EgtSetCurrentContext(nCtx)
+      ' Ciclo sui pezzi
+      Dim PartId As Integer = EgtGetFirstPart()
+      While PartId <> GDB_ID.NULL
+         ' Ciclo sui layer delle regioni
+         Dim RegionId As Integer = EgtGetFirstNameInGroup(PartId, NAME_REGION)
+         While RegionId <> GDB_ID.NULL
+            EgtSetColor(RegionId, InsertColor)
+            ' Ciclo sulle regioni
+            Dim EntId As Integer = EgtGetFirstInGroup(RegionId)
+            While EntId <> GDB_ID.NULL
+               If EgtGetType( EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
+               EntId = EgtGetNext(EntId)
+            End While
+            RegionId = EgtGetNextName(PartId, NAME_REGION)
+         End While
+         ' passo al pezzo successico
+         PartId = EgtGetNextPart(PartId)
+      End While
+      ' Aggiorno scritte per angoli sui lati
+      WriteSideAngleForNest(nCtx)
+   End Sub
+
    Private Sub UseLayerBtn_Click(sender As Object, e As RoutedEventArgs) Handles UseLayerBtn.Click
       ' Creo i pezzi
       Dim nType As Integer = If(m_nFileType = FT.NGE, FPC_TYPE.NGE, FPC_TYPE.LAYER)
@@ -589,6 +649,8 @@ Public Class ImportPageUC
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, m_MainWindow.GetIniFile()) <> 0 Then
          Engrave.ColorToEngrave(ImportScene.GetCtx())
       End If
+      ' gestico il colore degli elementi da importare (devono avere una regione definita!
+      ColorRegion(ImportScene.GetCtx())
       ' Eseguo zoom
       ImportScene.ZoomAll()
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert
@@ -619,6 +681,8 @@ Public Class ImportPageUC
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, m_MainWindow.GetIniFile()) <> 0 Then
          Engrave.ColorToEngrave(ImportScene.GetCtx())
       End If
+      ' gestico il colore degli elementi da importare (devono avere una regione definita!
+      ColorRegion(ImportScene.GetCtx())
       ' Eseguo zoom
       ImportScene.ZoomAll()
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert
@@ -649,6 +713,8 @@ Public Class ImportPageUC
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, m_MainWindow.GetIniFile()) <> 0 Then
          Engrave.ColorToEngrave(ImportScene.GetCtx())
       End If
+      ' gestico il colore degli elementi da importare (devono avere una regione definita!
+      ColorRegion(ImportScene.GetCtx())
       ' Eseguo zoom
       ImportScene.ZoomAll()
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert
@@ -772,6 +838,10 @@ Public Class ImportPageUC
          EgtErase(EgtGetFirstNameInGroup(PartId, SELECT_REGION_LAYER))
          PartId = EgtGetNextPart(PartId)
       End While
+
+      ' identificativo univoico del gruppo di pezzi, se più di un "Repeat"
+      Dim sGUICode As New List(Of String)
+
       ' Scrivo testi per nesting
       SideAngle.WriteSideAngleForNest(ImportScene.GetCtx())
       ' Imposto riferimento sul centro geometrico di ogni pezzo
@@ -781,26 +851,54 @@ Public Class ImportPageUC
       ' Salvo tutti i pezzi in un file temporaneo
       Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\FlatPart" & ".Nge"
       If Not EgtSaveFile(sTmpFile, NGE.BIN) Then Return
+
+      ' Determino numero ripetizioni
+      Dim nRepeat = 1
+      StringToInt(PartNumTxBx.Text, nRepeat)
+      nRepeat = Math.Min(Math.Max(1, nRepeat), 50)
+      ' creo il riferimento
+      If nRepeat > 1 Then
+         ' per ogni pezze del file DXF creo un gruppo
+         Dim nIdTemp As Integer = EgtGetFirstPart()
+         While nIdTemp <> GDB_ID.NULL
+            Dim sPreGuid As String = CreatePreGuidCode(nIdTemp)
+            sGUICode.Add(sPreGuid & System.Guid.NewGuid.ToString)
+            nIdTemp = EgtGetNextPart(nIdTemp)
+         End While
+      End If
+
       ' Passo al contesto principale
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Recupero flag per inserimento diretto in grezzo (altrimenti in parcheggio)
       Dim bDirect As Boolean = (GetPrivateProfileInt(S_NEST, K_DIRECT, 0, m_MainWindow.GetIniFile()) <> 0)
       ' Elimino eventuali precedenti pezzi vuoti
       EgtEraseEmptyParts()
-      ' Determino numero ripetizioni
-      Dim nRepeat = 1
-      StringToInt(PartNumTxBx.Text, nRepeat)
-      nRepeat = Math.Min(Math.Max(1, nRepeat), 50)
+
       ' Inserisco i pezzi nell'ambiente principale e recupero Id primo pezzo inserito
       Dim nFirstId As Integer = EgtGetLastPart()
       For nInd As Integer = 1 To nRepeat
          Dim nFirst2Id As Integer = EgtGetLastPart()
          EgtInsertFile(sTmpFile)
+
+         Dim FirstOfImport As Integer = EgtGetNextPart(nFirst2Id)
+         If FirstOfImport = GDB_ID.NULL Then FirstOfImport = EgtGetFirstPart()
+         Dim Index As Integer = 1
+         While FirstOfImport <> GDB_ID.NULL And Index <= sGUICode.Count
+            If Not String.IsNullOrEmpty(sGUICode(Index - 1)) Then
+               EgtSetInfo(FirstOfImport, INFO_REFGROUP, sGUICode(Index - 1))
+               Index += 1
+            Else
+               Exit While
+            End If
+            FirstOfImport = EgtGetNextPart(FirstOfImport)
+         End While
+
          nFirst2Id = If(nFirst2Id <> GDB_ID.NULL, EgtGetNextPart(nFirst2Id), EgtGetFirstPart())
          ' Eventuale inserimento pezzi in VeinMatching
          VeinMatching.AddParts(sTmpFile, nFirst2Id)
       Next
       nFirstId = If(nFirstId <> GDB_ID.NULL, EgtGetNextPart(nFirstId), EgtGetFirstPart())
+
       ' Cancello il file
       If My.Computer.FileSystem.FileExists(sTmpFile) Then
          My.Computer.FileSystem.DeleteFile(sTmpFile)
@@ -809,7 +907,7 @@ Public Class ImportPageUC
       Dim dNewArea As Double = 0
       Dim nId As Integer = nFirstId
       While nId <> GDB_ID.NULL
-         dNewArea += GeomCalc.GetPartArea( nId)
+         dNewArea += GeomCalc.GetPartArea(nId)
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
@@ -820,6 +918,7 @@ Public Class ImportPageUC
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
+
       ' Ciclo sui pezzi inseriti
       nId = nFirstId
       While nId <> GDB_ID.NULL
@@ -832,26 +931,26 @@ Public Class ImportPageUC
          If m_nFileType = FT.DXF Or m_nFileType = FT.NGE Then
             ' Eventuale testo per indicare il sopra
             If TopBtn.IsChecked() Then
-               Utility.AddTopToPartRegion( nRegId)
+               Utility.AddTopToPartRegion(nRegId)
             End If
             ' Se richiesti, inserisco dati Ordine, Distinta, Nome, Origine
             If m_bEnableOrderList Then
                ' Cerco il nome del pezzo
                Dim sName As String = ""
-               EgtGetName( nId, sName)
+               EgtGetName(nId, sName)
                ' Recupero il box del pezzo
-               Dim b3Reg As New BBox3d : EgtGetBBox( nRegId, GDB_BB.IGNORE_TEXT + GDB_BB.IGNORE_DIM, b3Reg)
+               Dim b3Reg As New BBox3d : EgtGetBBox(nRegId, GDB_BB.IGNORE_TEXT + GDB_BB.IGNORE_DIM, b3Reg)
                ' Aggiungo info equivalenti a CSV
                EgtSetInfo(nId, INFO_CSV_PART, sName)
                EgtSetInfo(nId, INFO_CSV_ORD, m_sOrder)
                EgtSetInfo(nId, INFO_CSV_DIST, m_sList)
                EgtSetInfo(nId, INFO_CSV_MAT, m_MainWindow.m_CurrentMachine.CurrMat.sName)
-               EgtSetInfo(nId, INFO_CSV_V1, DoubleToString( b3Reg.DimX(), 1))
-               EgtSetInfo(nId, INFO_CSV_V2, DoubleToString( b3Reg.DimY(), 1))
+               EgtSetInfo(nId, INFO_CSV_V1, DoubleToString(b3Reg.DimX(), 1))
+               EgtSetInfo(nId, INFO_CSV_V2, DoubleToString(b3Reg.DimY(), 1))
             End If
          End If
          ' Imposto colore testi
-         Utility.SetTextColor( nRegId)
+         Utility.SetTextColor(nRegId)
          ' Imposto path di provenienza
          EgtSetInfo(nId, INFO_SOU_PATH, IO.Path.Combine(m_sCurrDir, m_sCurrFile))
          ' Inserisco in parcheggio
@@ -871,7 +970,7 @@ Public Class ImportPageUC
       ' Eventuale aggiornamento VeinMatching
       VeinMatching.ZoomAll()
       ' Aggiorno Aree totale e da lavorare dei pezzi
-      m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea( dNewArea)
+      m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea(dNewArea)
       m_MainWindow.m_CurrentProjectPageUC.UpdateToProduceArea()
       m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
       ' Aggiorno ambiente principale

DrawImport/InternalComponentPageUC.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.IO
+Imports EgtUILib
 
 Public Class InternalComponentPageUC
 
@@ -24,7 +25,7 @@ Public Class InternalComponentPageUC
       ImageCompo9.Visibility = Windows.Visibility.Hidden
       LabelCompo9.Visibility = Windows.Visibility.Visible
       ' Se i componenti interni sono più di 8 viene visualizzato il bottone "Altri" altrimenti no
-      Dim nCount As Integer = GetPrivateProfileInt("InternalCompo", "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(S_INTCOMPO, K_INT_COUNT, 0, m_MainWindow.GetIniFile())
       If nCount > 8 Then
          Compo9.Visibility = Windows.Visibility.Visible
       Else
@@ -163,10 +164,10 @@ Public Class InternalComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = e.Source
-      Dim CompoName As String = "InternalCompo" & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = S_INTCOMPO & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       ' m_SecondaryComponentPage.m_sCurrCompo = String.Empty
-      Dim nCount As Integer = GetPrivateProfileInt(CompoName, "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       If nCount > 1 Then
          m_MainWindow.m_DrawPageUC.LeftButtonGrd.Children.Remove(Me)
          m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.SecondaryComponent
@@ -252,7 +253,7 @@ Public Class InternalComponentPageUC
    Private Sub LoadPage()
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
-      Dim nCompoNumber As Integer = GetPrivateProfileInt("InternalCompo", "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_INTCOMPO, K_INT_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)
@@ -286,12 +287,22 @@ Public Class InternalComponentPageUC
          If sCompoImage.Length <> 0 Then
             Try
                Dim sPath As String = m_MainWindow.GetResourcesDir() & "\" & sCompoImage
-               sCompoImageSource = ImageConverter.ConvertFromString(sPath)
-               GetImage(index).Height = 65
-               GetImage(index).Width = 65
-               GetImage(index).Source = sCompoImageSource
-               GetLabel(index).SetValue(Grid.ColumnProperty, 1)
-               GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               If File.Exists(sPath) Then
+                  sCompoImageSource = ImageConverter.ConvertFromString(sPath)
+                  GetImage(index).Height = 65
+                  GetImage(index).Width = 65
+                  GetImage(index).Source = sCompoImageSource
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 1)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               Else
+                  sCompoImage = String.Empty
+                  GetImage(index).Height = 0
+                  GetImage(index).Width = 0
+                  CustomThickness.Right = 0
+                  GetImage(index).Margin = CustomThickness
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 0)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 2)
+               End If
             Catch ex As Exception
                EgtOutLog("Error loading image " & sCompoImage)
                sCompoImage = String.Empty

DrawImport/MainComponentPageUC.xaml.vb

@@ -41,6 +41,7 @@ Public Class MainComponentPageUC
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.m_bBackFromInternalCompo = False
    End Sub
 
    Private Function GetButton(ByVal nInd As Integer) As Button
@@ -167,10 +168,10 @@ Public Class MainComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = DirectCast(e.Source, Button)
-      Dim CompoName As String = "Compo" & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = If(m_MainWindow.FrameCutBtn.IsChecked, S_FRAMECOMPO, S_COMPO) & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       m_SecondaryComponentPage.m_sCurrCompo = String.Empty
-      Dim nCount As Integer = GetPrivateProfileInt(CompoName, "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       If nCount > 1 Then
          m_MainWindow.m_DrawPageUC.LeftButtonGrd.Children.Remove(Me)
          m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.SecondaryComponent
@@ -251,13 +252,18 @@ Public Class MainComponentPageUC
    End Sub
 
    Private Sub LoadPage()
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         LoadFramePage()
+         Return
+      End If
+
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
-      Dim nCompoNumber As Integer = GetPrivateProfileInt("Compo", "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_COMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)
-      nDeltaSecondPage = 0
+         nDeltaSecondPage = 0
       Else
          ClearButton(nCompoNumber)
          nDeltaSecondPage = 8
@@ -325,16 +331,86 @@ Public Class MainComponentPageUC
 
    End Sub
 
+   Private Sub LoadFramePage()
+      Dim nDeltaSecondPage As Integer = 8
+      ' Leggo numero di componenti presenti
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
+      ' Calcolo indici a seconda della pagina in cui sono
+      If m_bIsFirstPage Then
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 0
+      Else
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 8
+      End If
+
+      ' Creazione converter da String a ImageSource
+      Dim ImageConverter As New ImageSourceConverter
+      Dim ThicknessConverter As New ThicknessConverter
+
+      'Assegnazione immagine e testo ai Button
+      For index As Integer = 1 To 8
+         Dim CustomThickness As New Thickness(0)
+         Dim nCompoName As Integer = GetPrivateProfileInt(S_FRAMECOMPO & index + nDeltaSecondPage, "Name", 0, m_MainWindow.GetIniFile())
+         Dim sCompoImage As String = ""
+         Dim sCompoImageSource As ImageSource
+
+         'verifico presenza immagine e la aggiungo
+         If GetPrivateProfileString(S_FRAMECOMPO & index + nDeltaSecondPage, "Image", "", sCompoImage, m_MainWindow.GetIniFile()) <> 0 Then
+            Try
+               sCompoImageSource = ImageConverter.ConvertFromString(m_MainWindow.GetResourcesDir() & "\" & sCompoImage)
+               GetImage(index).Height = 65
+               GetImage(index).Width = 65
+               GetImage(index).Source = sCompoImageSource
+            Catch ex As Exception
+               EgtOutLog("Error loading image " & sCompoImage)
+               sCompoImage = String.Empty
+               GetImage(index).Height = 0
+               GetImage(index).Width = 0
+               CustomThickness.Right = 0
+               GetImage(index).Margin = CustomThickness
+            End Try
+         Else
+            'Se non c'è l'immagine azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+         'verifico presenza testo
+         If nCompoName > 0 Then
+            Dim sCompoName As String = EgtMsg(MSG_COMPONENTPAGEUC + nCompoName)
+            'verifico presenza immagine
+            If sCompoImage.Length > 0 Then
+               'se la lunghezza del testo è maggiore di 15 lo taglio
+               If sCompoName.Length > 15 Then
+                  sCompoName = sCompoName.Substring(0, 15)
+               End If
+               GetLabel(index).Text = sCompoName
+               'Se ci sono sia testo che immagine imposto un margine di 10
+               CustomThickness.Right = 10
+               GetImage(index).Margin = CustomThickness
+            Else
+               'se l'immagine non c'è e il testo è maggiore di 20 lo taglio
+               If sCompoName.Length > 20 Then
+                  sCompoName = sCompoName.Substring(0, 20)
+               End If
+               GetLabel(index).Text = sCompoName
+            End If
+         Else
+            'Se non c'è testo azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+      Next
+
+   End Sub
+
    ' Gestione bottone altri componenti
    Private Sub Compo9_Click(sender As Object, e As RoutedEventArgs) Handles Compo9.Click
       If m_bIsFirstPage Then
          m_bIsFirstPage = False
          LoadPage()
-         'Compo9.SetValue(Grid.ColumnProperty, 1)
-         'Compo9.SetValue(Grid.ColumnSpanProperty, 1)
-         'ImageCompo9.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NumericKeyboardArrow.png", UriKind.Relative))
-         'ImageCompo9.Visibility = Windows.Visibility.Visible
-         'LabelCompo9.Visibility = Windows.Visibility.Hidden
          Compo9.SetValue(Grid.ColumnProperty, 0)
          Compo9.SetValue(Grid.ColumnSpanProperty, 2)
          ImageCompo9.Visibility = Windows.Visibility.Hidden

DrawImport/SecondaryComponentPageUC.xaml.vb

@@ -26,17 +26,17 @@ Public Class SecondaryComponentPageUC
       Dim ImageConverter As New ImageSourceConverter
       Dim ThicknessConverter As New ThicknessConverter
 
-      m_sMainCompoName = m_MainComponentPage.m_sCurrCompoFam  '"Compo" & m_MainComponentPage.GetIndexFromButton(CurrentMainBtn)
+      m_sMainCompoName = m_MainComponentPage.m_sCurrCompoFam
 
       'Assegnazione immagine e testo ai Button
-      Dim nCount As Integer = GetPrivateProfileInt(m_sMainCompoName, "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(m_sMainCompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ClearButton(nCount)
       For index As Integer = 1 To nCount
          Dim CustomThickness As Thickness = ThicknessConverter.ConvertFromString("0")
-         Dim nCompoName As Integer = GetPrivateProfileInt(m_sMainCompoName, "Compo" & index, 0, m_MainWindow.GetIniFile())
+         Dim nCompoName As Integer = GetPrivateProfileInt(m_sMainCompoName, S_EXTCOMPO & index, 0, m_MainWindow.GetIniFile())
          Dim sCompo As String = ""
          Dim sCompoImage As String = ""
-         m_MainComponentPage.GetPrivateProfileCompo(m_sMainCompoName, "Compo" & index, nCompoName, sCompo, sCompoImage, m_MainWindow.GetIniFile())
+         m_MainComponentPage.GetPrivateProfileCompo(m_sMainCompoName, S_EXTCOMPO & index, nCompoName, sCompo, sCompoImage, m_MainWindow.GetIniFile())
          Dim sCompoImageSource As ImageSource
 
          'verifico presenza immagine e la aggiungo

DrawImport/SideAngle.vb

@@ -159,7 +159,7 @@ Module SideAngle
       Return True
    End Function
 
-   Private Function WriteSideAngleOnLoop(LoopId As Integer, TextLayId As Integer) As Boolean
+   Friend Function WriteSideAngleOnLoop(LoopId As Integer, TextLayId As Integer) As Boolean
       ' Verifiche
       If LoopId = GDB_ID.NULL Or TextLayId = GDB_ID.NULL Then Return False
       ' Calcolo dimensione ingombro Loop
@@ -201,7 +201,7 @@ Module SideAngle
    Friend Sub ColorToSideAngle(nCtx As Integer)
       ' Leggo dati corrispondenza colore-angolo
       Dim CurrCSA As New ColorSideAngs
-      CurrCSA.Read( m_MainWindow.GetIniFile)
+      CurrCSA.Read(m_MainWindow.GetIniFile)
       ' Imposto contesto corrente
       EgtSetCurrentContext(nCtx)
       ' Ciclo sui pezzi
@@ -212,27 +212,27 @@ Module SideAngle
          Dim LoopId As Integer = EgtGetFirstNameInGroup(PartId, NAME_OUTLOOP)
          While LoopId <> GDB_ID.NULL
             ' Ciclo sulle curve
-            Dim PrevId As Integer = EgtGetLastInGroup( LoopId)
-            Dim EntId As Integer = EgtGetFirstInGroup( LoopId)
+            Dim PrevId As Integer = EgtGetLastInGroup(LoopId)
+            Dim EntId As Integer = EgtGetFirstInGroup(LoopId)
             While EntId <> GDB_ID.NULL
-               Dim NextId As Integer = EgtGetNext( EntId)
-               If  NextId = GDB_ID.NULL Then NextId = EgtGetFirstInGroup( LoopId)
-               If VerifySideAnglePossible( PrevId, EntId, NextId, bOutLoop) Then
+               Dim NextId As Integer = EgtGetNext(EntId)
+               If NextId = GDB_ID.NULL Then NextId = EgtGetFirstInGroup(LoopId)
+               If VerifySideAnglePossible(PrevId, EntId, NextId, bOutLoop) Then
                   Dim colEnt As Color3d
-                  If EgtGetColor( EntId, colEnt) Then
+                  If EgtGetColor(EntId, colEnt) Then
                      Dim dAng As Double
                      Dim dHeel As Double
-                     If CurrCSA.GetSideAngHeel( colEnt, dAng, dHeel) Then
-                        EgtSetInfo( EntId, INFO_SIDE_ANGLE, dAng)
-                        EgtSetInfo( EntId, INFO_ORIG_SIDE_ANGLE, dAng)
-                        EgtSetInfo( EntId, INFO_HEEL, dHeel)
+                     If CurrCSA.GetSideAngHeel(colEnt, dAng, dHeel) Then
+                        EgtSetInfo(EntId, INFO_SIDE_ANGLE, dAng)
+                        EgtSetInfo(EntId, INFO_ORIG_SIDE_ANGLE, dAng)
+                        EgtSetInfo(EntId, INFO_HEEL, dHeel)
                      End If
                   End If
                End If
                PrevId = EntId
-               EntId = EgtGetNext( EntId)
+               EntId = EgtGetNext(EntId)
             End While
-            If bOutLoop then
+            If bOutLoop Then
                bOutLoop = False
                LoopId = EgtGetFirstNameInGroup(PartId, NAME_INLOOP)
             Else

DrawImport/SideAngleUc.xaml

@@ -5,7 +5,7 @@
    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
    mc:Ignorable="d" 
-   d:DesignHeight="597.1" d:DesignWidth="255.9">
+   d:DesignHeight="636.9" d:DesignWidth="255.9">
 
    <!-- Definizione della Grid Laterale -->
    <Grid Name="VariablesCompoGrid"  Grid.RowSpan="2">
@@ -28,7 +28,7 @@
          <RowDefinition Height="1*"/>
          <RowDefinition Height="1*"/>
          <RowDefinition Height="0.2*"/>
-         <RowDefinition Height="4*"/>
+         <RowDefinition Height="5*"/>
          <!--<RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>-->
@@ -56,7 +56,7 @@
       <TextBlock Name="Entity1" Grid.Row="1" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A1" Grid.Column="1" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A1TxBx" Grid.Column="2" Grid.Row="1" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A1TxBx" Grid.Column="2" Grid.Row="1" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H1TxBx" Grid.Column="3" Grid.Row="1" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -64,7 +64,7 @@
       <TextBlock Name="Entity2" Grid.Row="2" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A2" Grid.Column="1" Grid.Row="2" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A2TxBx" Grid.Column="2" Grid.Row="2" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A2TxBx" Grid.Column="2" Grid.Row="2" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H2TxBx" Grid.Column="3" Grid.Row="2" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -72,7 +72,7 @@
       <TextBlock Name="Entity3" Grid.Row="3" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A3" Grid.Column="1" Grid.Row="3" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A3TxBx" Grid.Column="2" Grid.Row="3" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A3TxBx" Grid.Column="2" Grid.Row="3" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H3TxBx" Grid.Column="3" Grid.Row="3" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -80,7 +80,7 @@
       <TextBlock Name="Entity4" Grid.Row="4" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A4" Grid.Column="1" Grid.Row="4" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A4TxBx" Grid.Column="2" Grid.Row="4" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A4TxBx" Grid.Column="2" Grid.Row="4" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H4TxBx" Grid.Column="3" Grid.Row="4" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -88,7 +88,7 @@
       <TextBlock Name="Entity5" Grid.Row="5" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A5" Grid.Column="1" Grid.Row="5" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A5TxBx" Grid.Column="2" Grid.Row="5" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A5TxBx" Grid.Column="2" Grid.Row="5" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H5TxBx" Grid.Column="3" Grid.Row="5" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -96,7 +96,7 @@
       <TextBlock Name="Entity6" Grid.Row="6" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A6" Grid.Column="1" Grid.Row="6" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A6TxBx" Grid.Column="2" Grid.Row="6" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A6TxBx" Grid.Column="2" Grid.Row="6" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H6TxBx" Grid.Column="3" Grid.Row="6" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -104,7 +104,7 @@
       <TextBlock Name="Entity7" Grid.Row="7" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A7" Grid.Column="1" Grid.Row="7" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A7TxBx" Grid.Column="2" Grid.Row="7" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A7TxBx" Grid.Column="2" Grid.Row="7" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H7TxBx" Grid.Column="3" Grid.Row="7" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -112,7 +112,7 @@
       <TextBlock Name="Entity8" Grid.Row="8" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A8" Grid.Column="1" Grid.Row="8" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A8TxBx" Grid.Column="2" Grid.Row="8" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A8TxBx" Grid.Column="2" Grid.Row="8" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H8TxBx" Grid.Column="3" Grid.Row="8" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -120,7 +120,7 @@
       <TextBlock Name="Entity9" Grid.Row="9" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A9" Grid.Column="1" Grid.Row="9" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A9TxBx" Grid.Column="2" Grid.Row="9" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A9TxBx" Grid.Column="2" Grid.Row="9" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H9TxBx" Grid.Column="3" Grid.Row="9" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -128,14 +128,14 @@
       <TextBlock Name="Entity10" Grid.Row="10" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A10" Grid.Column="1" Grid.Row="10" Height="30" Width="40" HorizontalAlignment="Right"
           Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A10TxBx" Grid.Column="2" Grid.Row="10" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A10TxBx" Grid.Column="2" Grid.Row="10" Width="60" IsLength="False"
                             Margin="0,0,0,-2"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H10TxBx" Grid.Column="3" Grid.Row="10" Width="60"
                             Margin="0,0,0,-2"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-      <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4">
+      <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4" >
           <Grid.ColumnDefinitions>
                 <ColumnDefinition Width="1.5*"/>
                 <ColumnDefinition Width="0.3*"/>
@@ -143,10 +143,11 @@
                 <ColumnDefinition Width="0.6*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
             </Grid.RowDefinitions>
 
             <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
@@ -168,7 +169,7 @@
             <UniformGrid Rows="1" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Width="90" >
                 <EgtWPFLib:EgtTextBox Name="Parameter2aTxBx" 
                                       Grid.Column="2" Grid.Row="12"
-                                      Width="40" Height="30"
+                                      Width="40" Height="30" IsLength="False"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                 <EgtWPFLib:EgtTextBox Name="Parameter2bTxBx" 
                                       Grid.Column="3" Grid.Row="12" 
@@ -196,6 +197,16 @@
                                   Margin="0,0,0,-2"
                                   Width="85" Height="30"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            <TextBlock Name="Parameter5TxBl" Grid.Row="4" Grid.ColumnSpan="2"
+               Text="Angolo"
+               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
+                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="4" 
+                                  Margin="0,0,0,-2"
+                                  Width="85" Height="30" IsLength="False"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
         </Grid>
 
         <!--<TextBlock Name="Parameter1TxBl" Grid.Row="11" Text="Offset"

DrawImport/SideAngleUc.xaml.vb

@@ -34,7 +34,9 @@ Public Class SideAngleUC
    Friend m_dDripOffset2 As Double = 0
    Friend m_nEngrNbr2 As Integer = 1
    Friend m_dDripDepth As Double = 10
+   Friend m_dEngraveDepth2 As Double = 15
    Friend m_dDripShort As Double = 0
+   Friend m_dEngraveAngle As Double = 0
 
    Private CurrEntityDrip As DripEntity
 
@@ -75,10 +77,12 @@ Public Class SideAngleUC
 
       ' Inizializzo lati per angoli e per gocciolatoi (ne compilo la lista e aggiungo la scritta nel disegno)
       InitSides()
-      ' Aggiorno testi nel disegno e creo i gocciolatoi
-      RefreshSideAngleText()
+      '' Aggiorno testi nel disegno e creo i gocciolatoi
+      'RefreshSideAngleText()
       ' Aggiorno check e valori
       RefreshCheckAndValue()
+      ' Aggiorno testi nel disegno e creo i gocciolatoi
+      RefreshSideAngleText()
 
       ' Gestisco visualizzazione di tutti i parametri
       If m_Mode = ModeOpt.SIDEANGLE Then
@@ -103,6 +107,9 @@ Public Class SideAngleUC
          ' Accorciamento
          Parameter4TxBl.Visibility = Windows.Visibility.Hidden
          Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         ' Angolo 
+         Parameter5TxBl.Visibility = Windows.Visibility.Hidden
+         Parameter5TxBx.Visibility = Windows.Visibility.Hidden
       Else
          ' se aggiungo gli ENGRAVE e i DRIP
 
@@ -114,10 +121,12 @@ Public Class SideAngleUC
             GetAngleTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
             GetHeelTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
          Next
+
          ' Offset
          Parameter1TxBl.Visibility = Windows.Visibility.Visible
          Parameter1TxBx.Visibility = Windows.Visibility.Visible
          Parameter2TxBl.Visibility = Windows.Visibility.Visible
+
          ' Offset2
          If m_Mode <> ModeOpt.ENGRAVE Then
             Parameter2TxBx.Visibility = Windows.Visibility.Visible
@@ -128,12 +137,33 @@ Public Class SideAngleUC
             Parameter2aTxBx.Visibility = Windows.Visibility.Visible
             Parameter2bTxBx.Visibility = Windows.Visibility.Visible
          End If
+
          ' Affondamento
          Parameter3TxBl.Visibility = Windows.Visibility.Visible
          Parameter3TxBx.Visibility = Windows.Visibility.Visible
+
          ' Accorciamento
-         Parameter4TxBl.Visibility = Windows.Visibility.Hidden
-         Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         If m_Mode = ModeOpt.ENGRAVE Then
+            ' modifico il nome del messaggio 
+            Parameter4TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11) & "2"     ' Affondamento2
+            Parameter4TxBl.Visibility = Windows.Visibility.Visible
+            Parameter4TxBx.Visibility = Windows.Visibility.Visible
+         Else
+            Parameter4TxBl.Visibility = Windows.Visibility.Hidden
+            Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         End If
+
+         ' Angolo
+         If m_Mode = ModeOpt.ENGRAVE Then
+            ' modifico il nome del messaggio 
+            Parameter5TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 9)            ' Angolo
+            Parameter5TxBl.Visibility = Windows.Visibility.Visible
+            Parameter5TxBx.Visibility = Windows.Visibility.Visible
+         Else
+            Parameter5TxBl.Visibility = Windows.Visibility.Hidden
+            Parameter5TxBx.Visibility = Windows.Visibility.Hidden
+         End If
+
       End If
 
       ' Gestisco Checkbox e nomi in base al numero di lati inclinabili
@@ -154,12 +184,14 @@ Public Class SideAngleUC
          m_nEngrNbr2 = GetPrivateProfileInt( S_SIDES, K_ENGRAVENUMBER2, 1, m_MainWindow.GetIniFile())
          m_dDripOffset2 = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEOFFSET2, 0, m_MainWindow.GetIniFile())
          m_dDripDepth = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEDEPTH, 10, m_MainWindow.GetIniFile())
-         m_dDripShort = GetPrivateProfileDouble( S_SIDES, K_ENGRAVESHORT, 0, m_MainWindow.GetIniFile())
-         Parameter1TxBx.Text = LenToString( m_dDripOffset, 3)
+         m_dEngraveDepth2 = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0, m_MainWindow.GetIniFile())
+         m_dEngraveAngle = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEANGLE, 0, m_MainWindow.GetIniFile())
+         Parameter1TxBx.Text = LenToString(m_dDripOffset, 3)
          Parameter2aTxBx.Text = m_nEngrNbr2.ToString()
          Parameter2bTxBx.Text = LenToString( m_dDripOffset2, 3)
          Parameter3TxBx.Text = LenToString( m_dDripDepth, 3)
-         Parameter4TxBx.Text = LenToString( m_dDripShort, 3)
+         Parameter4TxBx.Text = LenToString(m_dEngraveDepth2, 3)
+         Parameter5TxBx.Text = DoubleToString(m_dEngraveAngle, 3)
       End If
 
       ' Aggiorno visualizzazione
@@ -179,6 +211,10 @@ Public Class SideAngleUC
          ' Imposto contesto corrente
          EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
          ' Ricavo nome primo pezzo e lo sistemo
+         If m_Mode = ModeOpt.ENGRAVE And m_MainWindow.m_DrawPageUC.SelectedLayer = GDB_ID.NULL Then
+            PartId = EgtGetFirstPart()
+            m_MainWindow.m_DrawPageUC.SetCurrLayer(EgtGetFirstNameInGroup(PartId, NAME_OUTLOOP))
+         End If
          PartId = If(m_MainWindow.m_DrawPageUC.SelectedLayer <> GDB_ID.NULL, EgtGetFirstPart(), GDB_ID.NULL)
          ' Recupero nome layer con geometria di contorno (esterno o interno) del pezzo
          LoopId = m_MainWindow.m_DrawPageUC.SelectedLayer
@@ -275,8 +311,8 @@ Public Class SideAngleUC
       ' Attualmente il vaore m_nCount è inizializzato ad "1"..
       ' Bottoni Prev Next
       If m_nCount <= MAX_LINES Then
-         PrevBtn.Visibility = Windows.Visibility.Hidden
-         NextBtn.Visibility = Windows.Visibility.Hidden
+         PrevBtn.Visibility= Windows.Visibility.Hidden
+         NextBtn.Visibility= Windows.Visibility.Hidden
       Else
          Grid.SetRow(PrevBtn, MAX_LINES - m_nShow)
          PrevBtn.Visibility = Windows.Visibility.Visible
@@ -483,7 +519,9 @@ Public Class SideAngleUC
          WritePrivateProfileString( S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString(), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, LenToString(m_dDripOffset2, 3), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3), m_MainWindow.GetIniFile())
          'WritePrivateProfileString( S_SIDES, K_ENGRAVESHORT, DoubleToString( m_dDripShort, 3), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVEANGLE, LenToString(m_dEngraveAngle, 3), m_MainWindow.GetIniFile())
       End If
 
       EgtDraw()
@@ -497,11 +535,10 @@ Public Class SideAngleUC
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Imposto contesto corrente
          EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
-         ' Ricavo nome primo pezzo
          PartId = If(m_MainWindow.m_DrawPageUC.SelectedLayer <> GDB_ID.NULL, EgtGetFirstPart(), GDB_ID.NULL)
          ' Recupero nome layer con geometria di contorno (esterno o interno) del pezzo
          LoopId = m_MainWindow.m_DrawPageUC.SelectedLayer
-      ElseIf m_CallingPage = MainWindow.Pages.Import Then
+         ElseIf m_CallingPage = MainWindow.Pages.Import Then
          ' Imposto contesto corrente
          EgtSetCurrentContext(m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
          ' Recupero nome pezzo
@@ -568,8 +605,20 @@ Public Class SideAngleUC
             ' verifico se l'entità ha un gocciolatoio
             GetChBxFromIndex(nChIndex).IsChecked = Entity.bHaveDrip
             ' aggiorno i valore delle caselle di testo per le entità caricate (Start/End)
-            GetAngleTxBxFromIndex(nChIndex).Text = DoubleToString(Entity.dShortStart, 1)
-            GetHeelTxBxFromIndex(nChIndex).Text = LenToString(Entity.dShortStart, 1)
+            If m_Mode = ModeOpt.ENGRAVE Then
+               Dim dVal As Double = 0
+               If StringToLen(GetPrivateProfileDouble(S_SIDES, K_ENGRAVESHORT & "A" & nIndex.ToString & "_Start", 0, m_MainWindow.GetIniFile()), dVal) Then
+                  Entity.dShortStart = dVal
+               End If
+               If StringToLen(GetPrivateProfileDouble(S_SIDES, K_ENGRAVESHORT & "A" & nIndex.ToString & "_End", 0, m_MainWindow.GetIniFile()), dVal) Then
+                  Entity.dShortEnd = dVal
+               End If
+            Else
+               'GetAngleTxBxFromIndex(Index).Text = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT & "A" & nI.ToString & "_Start", 0, m_MainWindow.GetIniFile())
+               'GetHeelTxBxFromIndex(Index).Text = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT & "A" & nI.ToString & "_End", 0, m_MainWindow.GetIniFile())
+            End If
+            GetAngleTxBxFromIndex(nChIndex).Text = LenToString(Entity.dShortStart, 1)
+            GetHeelTxBxFromIndex(nChIndex).Text = LenToString(Entity.dShortEnd, 1)
          Next
       End If
    End Sub
@@ -618,7 +667,7 @@ Public Class SideAngleUC
       SideAngle.AddTextToLine(sEntityName, TextLayer, CurrLine, 20, dBBoxRad, True)
    End Sub
 
-   ' Funzione che crea le geometrie dei gocciolatoi
+   ' Funzione che crea le geometrie dei gocciolatoi (NON UTILIZZATA)
    Friend Sub CreateDripGeomOLD(nPartId As Integer)
       ' Recupero Id layer di contorno esterno
       Dim nOutLoopId = EgtGetFirstNameInGroup(nPartId, NAME_OUTLOOP)
@@ -738,6 +787,10 @@ Public Class SideAngleUC
             vJoint.Add(False)
          End If
       Next
+
+      ' se non riesco a generare un elenco allora esco
+      If vJoint.Count < 1 Then Return
+
       If vJoint(0) And vJoint(vJoint.Count - 1) Then
          bJointStart = True
       End If
@@ -809,6 +862,9 @@ Public Class SideAngleUC
       Dim nCrvId = EgtGetFirstInGroup(DripLayer)
       While nCrvId <> GDB_ID.NULL
          EgtOffsetCurve(nCrvId, -m_dDripOffset, OFF_TYPE.EXTEND)
+         If m_Mode = ModeOpt.ENGRAVE Then
+            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+         End If
          nCrvId = EgtGetNext(nCrvId)
       End While
       ' Eventuali curve aggiuntive con offset2
@@ -819,10 +875,16 @@ Public Class SideAngleUC
             For i As Integer = 1 To m_nEngrNbr2
                Dim nNewId As Integer = EgtCopy(nCrvId, nCrvId, GDB_POS.AFTER)
                EgtOffsetCurve(nNewId, -i * m_dDripOffset2, OFF_TYPE.EXTEND)
+               If m_Mode = ModeOpt.ENGRAVE Then
+                  EgtSetInfo(nNewId, INFO_DEPTH, m_dEngraveDepth2)
+               End If
             Next
             nCrvId = nNextCrvId
          End While
       End If
+
+      Dim ListEngraveSideAng As New List(Of Integer)
+
       If m_Mode = ModeOpt.DRIP Then
          ' Esplodo nelle curve componenti
          nCrvId = EgtGetFirstInGroup(DripLayer)
@@ -842,14 +904,70 @@ Public Class SideAngleUC
          End While
       Else
          ' Assegno colore e attributi
+         Dim nInd As Integer = 0
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
             EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
-            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+            'EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
             EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
+            If nInd = 0 Then
+               ' solo se m_dEngraveAngle > 0
+               If Math.Abs(m_dEngraveAngle) > EPS_ANG_SMALL Then
+                  ' salvo l'Id della curva che deve essere manipolato separatamente
+                  ListEngraveSideAng.Add(nCrvId)
+               Else
+                  EgtRemoveInfo(nCrvId, INFO_SIDE_ANGLE)
+                  EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+               End If
+            Else
+               If nInd = m_nEngrNbr2 Then
+                  nInd = -1
+               End If
+               EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+            End If
+            nInd = nInd + 1
+            If nInd > m_nEngrNbr2 Then nInd = 0
             nCrvId = EgtGetNext(nCrvId)
          End While
       End If
+      SplitJointedSideEngrave(ListEngraveSideAng)
+   End Sub
+
+   Private Sub SplitJointedSideEngrave(ListEngraveSideAngId As List(Of Integer))
+      For Each nCrvId As Integer In ListEngraveSideAngId
+         ' eventualmente separo il taglio inclinato
+         Dim dUs, dUe As Double
+         EgtCurveDomain(nCrvId, dUs, dUe)
+         Dim dU As Double = dUs
+         While dU < dUe ' + EPS_ZERO
+            Dim ptCurr As Point3d
+            EgtAtParamPoint(nCrvId, dU + 1, nCrvId, ptCurr)
+            ' separa la curva in questo punto
+            Dim nNewCurvId As Integer = GDB_ID.NULL
+            If dUe > 1 Then
+               nNewCurvId = EgtSplitCurveAtPoint(nCrvId, ptCurr, GDB_RT.LOC)
+            Else
+               nNewCurvId = nCrvId
+            End If
+            EgtSetColor(nCrvId, COL_MCH_ONENGRAVE_ANG())
+            EgtSetInfo(nCrvId, INFO_SIDE_ANGLE, m_dEngraveAngle)
+            ' recupero il vettore di estrusione della curva e la direzione della curva
+            Dim vtAux As Vector3d
+            EgtStartVector(nCrvId, vtAux)
+            Dim vtExtrusion As Vector3d
+            EgtCurveExtrusion(nCrvId, vtExtrusion)
+            ' ruoto il vetottore nella nuova direzione
+            vtExtrusion.Rotate(vtAux, -m_dEngraveAngle)
+            ' assegno il vettore di estrusione nella nuova direzione indicata (segno negativo perchè dentro il pezzo)
+            EgtModifyCurveExtrusion(nCrvId, vtExtrusion)
+            Dim ExtendFactor As Double = New Vector3d(0, 0, 1) * vtExtrusion
+            EgtModifyCurveThickness(nCrvId, -m_dDripDepth / ExtendFactor)
+            If dUe = 1 Then Exit While
+            nCrvId = nNewCurvId
+            ' aggiorno i valori del dominio della curva che rimane
+            EgtCurveDomain(nCrvId, dUs, dUe)
+         End While
+      Next
    End Sub
 
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
@@ -1283,11 +1401,25 @@ Public Class SideAngleUC
    End Sub
 
    Private Sub Parameter4TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter4TxBx.EgtClosed
-      If m_Mode = ModeOpt.DRIP Or m_Mode = ModeOpt.ENGRAVE Then
+      If m_Mode = ModeOpt.DRIP Then
          ' Recupero il valore
          StringToLen(Parameter4TxBx.Text, m_dDripShort)
          ' Creo le geometrie dei gocciolatoi
          RefreshSideAngleText()
+      ElseIf m_Mode = ModeOpt.ENGRAVE Then
+         ' Recupero il valore
+         StringToLen(Parameter4TxBx.Text, m_dEngraveDepth2)
+         ' Creo le geometrie dei gocciolatoi
+         RefreshSideAngleText()
+      End If
+   End Sub
+
+   Private Sub Parameter5TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter5TxBx.EgtClosed
+      If m_Mode = ModeOpt.ENGRAVE Then
+         ' Recupero il valore
+         StringToDouble(Parameter5TxBx.Text, m_dEngraveAngle)
+         ' Creo le geometrie dei gocciolatoi
+         RefreshSideAngleText()
       End If
    End Sub
 

EgtDictionary.xaml

@@ -1,16 +1,48 @@
-<ResourceDictionary
-   x:Class="EgtDictionary"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:Project="clr-namespace:OmagCUT"
-   xmlns:ControlExtensions="clr-namespace:OmagCUT.ControlExtensions">
+<ResourceDictionary x:Class="EgtDictionary"
+                    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+                    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+                    xmlns:Project="clr-namespace:OmagCUT"
+                    xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+                    xmlns:EgtPHOTOLib="clr-namespace:EgtPHOTOLib;assembly=EgtPHOTOLib"
+                    xmlns:EgtFloating="clr-namespace:EgtWPFLib5.EgtFloating;assembly=EgtWPFLib5"
+                    xmlns:ControlExtensions="clr-namespace:OmagCUT.ControlExtensions">
 
-   <!--Template che permette di andare a capo-->
+    <EgtWPFLib5:StatusBarVM x:Key="StatusBarVM"/>
+    <EgtWPFLib5:ShowPanelVM x:Key="ShowPanelVM"/>
+    <EgtWPFLib5:ViewPanelVM x:Key="ViewPanelVM"/>
+    <EgtWPFLib5:InstrumentPanelVM x:Key="InstrumentPanelVM"/>
+
+    <EgtPHOTOLib:ProjectSlabVM x:Key="ProjectSlabVM"/>
+    <EgtPHOTOLib:OptionPanelSlabVM x:Key="OptionPanelSlabVM"/>
+    <EgtPHOTOLib:ListPageSlabVM x:Key="ListPageSlabVM"/>
+    <EgtPHOTOLib:DetailPageSlabVM x:Key="DetailPageSlabVM"/>
+    <EgtPHOTOLib:SearchPanelSlabVM x:Key="SearchPanelSlabVM"/>
+    <EgtPHOTOLib:MyInstrumentPanelSlabVM x:Key="MyInstrumentPanelSlabVM"/>
+
+    <!--Colori predefiniti-->
+    <SolidColorBrush x:Key="Omag_Blue" Color="#FF095CA8" />
+    <SolidColorBrush x:Key="Omag_Yellow" Color="#FFFFCE5B" />
+    <SolidColorBrush x:Key="Omag_Red" Color="Red" />
+    <SolidColorBrush x:Key="Omag_Green" Color="LawnGreen" />
+    <SolidColorBrush x:Key="Omag_VeryLightGray" Color="#FFF2F2F2" />
+    <SolidColorBrush x:Key="Omag_LightGray" Color="LightGray" />
+    <SolidColorBrush x:Key="Omag_Gray" Color="#FF9E9E9E" />
+    <SolidColorBrush x:Key="Omag_DarkGray" Color="#FF444444" />
+    <SolidColorBrush x:Key="Omag_White" Color="#FFFFFFFF" />
+    <SolidColorBrush x:Key="Omag_Black" Color="#FF000000" />
+
+    <SolidColorBrush x:Key="EgaltechBlue1" Color="#FF095CA8" />
+    <SolidColorBrush x:Key="EgaltechWhite" Color="#FFFFFFFF" />
+
+    <!--Template che permette di andare a capo-->
    <DataTemplate x:Key="Button_DataTemplate_Wrap">
       <TextBlock TextWrapping="Wrap" Text="{Binding}"/>
    </DataTemplate>
 
-   <!--ButtonBase-->
+    <!-- ______________________________________________________________________________________________________________________________________________ -->
+
+    <!-- Button Style -->
+
    <Style TargetType="{x:Type Button}">
       <Setter Property="FocusVisualStyle">
          <Setter.Value>
@@ -71,7 +103,44 @@
       </Setter>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <!--Template che permette di andare a capo-->
+    <DataTemplate x:Key="WrapButton_DataTemplate">
+        <TextBlock TextWrapping="WrapWithOverflow" Text="{Binding}"/>
+    </DataTemplate>
+
+    <Style x:Key="ToolBar_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="30"/>
+    </Style>
+    <Style x:Key="ToolBar_TextButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="80"/>
+    </Style>
+    <Style x:Key="OptionPanel_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="60"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+    <Style x:Key="OptionPanel_TextButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+    </Style>
+    <Style x:Key="OptionPanel_TextWrapButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="ContentTemplate" Value="{StaticResource WrapButton_DataTemplate}" />
+        <Setter Property="TextBlock.TextAlignment" Value="Center"/>
+        <Setter Property="Height" Value="45"/>
+    </Style>
+    <Style x:Key="OptionPanel_NestingButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="60"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+    <Style x:Key="CompoWindow_Button" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="40"/>
+    </Style>
+    <Style x:Key="EgtWPFLib5_InputButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!--Template che permette di andare a capo-->
    <DataTemplate x:Key="CheckBox_DataTemplate_Wrap">
@@ -375,7 +444,59 @@
       </Setter>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <Style x:Key="ToolBar_ToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="30"/>
+    </Style>
+
+    <Style x:Key="ToolBar_TextToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="30"/>
+        <Setter Property="Width" Value="70"/>
+    </Style>
+
+    <Style x:Key="OptionPanel_ToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="30"/>
+    </Style>
+
+    <Style x:Key="OptionPanel_NestingToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="60"/>
+        <Setter Property="Width" Value="60"/>
+    </Style>
+
+    <Style x:Key="CompoWindow_ToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="40"/>
+    </Style>
+
+    <Style x:Key="CompoWindow_WrapToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="ContentTemplate" Value="{StaticResource WrapButton_DataTemplate}" />
+        <Setter Property="TextBlock.TextAlignment" Value="Center" />
+        <Setter Property="Height" Value="40"/>
+    </Style>
+
+    <Style x:Key="Option_ColorButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
+        <Setter Property="Padding" Value="5"/>
+        <Setter Property="HorizontalContentAlignment" Value="Center"/>
+        <Setter Property="VerticalContentAlignment" Value="Center"/>
+        <Setter Property="TextBlock.TextAlignment" Value="Center"/>
+        <Style.Triggers>
+            <Trigger Property="IsMouseOver" Value="True">
+                <Setter Property="Background" Value="#FFB8C3CD"/>
+            </Trigger>
+            <Trigger Property="IsPressed" Value="True">
+                <Setter Property="OpacityMask" Value="#33FF0000"/>
+            </Trigger>
+            <Trigger Property="ToggleButton.IsChecked" Value="True">
+                <Setter Property="Background" Value="Transparent"/>
+            </Trigger>
+            <Trigger Property="IsEnabled" Value="False">
+                <Setter Property="Background" Value="#FFF4F4F4"/>
+                <Setter Property="BorderBrush" Value="#FFADB2B5"/>
+                <Setter Property="TextElement.Foreground"  Value="#FF838383"/>
+            </Trigger>
+        </Style.Triggers>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
    <!--TreeViewBase-->
    <!--Style e colori della freccia di espansione, necessari per modificare il ContainerItemStyle perchè contiene riferimenti ad essi-->
@@ -431,6 +552,32 @@
       </Setter>
    </Style>
 
-   <!-- ______________________________________________________________________________________________________________________ -->
+    <!-- ______________________________________________________________________________________________________________________________________________ -->
+
+    <!-- EgtCustomWindow -->
+
+    <Style TargetType="{x:Type EgtWPFLib5:EgtCustomWindow}" BasedOn="{StaticResource {x:Type EgtWPFLib5:EgtCustomWindow}}">
+        <Setter Property="TitleBarHeight" Value="32"/>
+        <Setter Property="TitleBarBrush" Value="{StaticResource Omag_LightGray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource Omag_Gray}"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________________________________ -->
+
+    <!-- EgtFloatingPanel -->
+
+    <Style x:Key="ToolBar_EgtFloatingPanel" TargetType="{x:Type EgtFloating:EgtFloatingPanel}" BasedOn="{StaticResource {x:Type EgtFloating:EgtFloatingPanel}}">
+        <Setter Property="Background" Value="{StaticResource Omag_Gray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource Omag_Gray}"/>
+    </Style>
+
+    <Style x:Key="Option_EgtFloatingPanel" TargetType="{x:Type EgtFloating:EgtFloatingPanel}" BasedOn="{StaticResource {x:Type EgtFloating:EgtFloatingPanel}}">
+        <Setter Property="IsToolBar" Value="False"/>
+        <Setter Property="TitleBarOrientation" Value="Vertical"/>
+        <Setter Property="Background" Value="{StaticResource Omag_Gray}"/>
+        <Setter Property="BorderBrush" Value="{StaticResource Omag_Gray}"/>
+    </Style>
+
+    <!-- ______________________________________________________________________________________________________________________ -->
 
 </ResourceDictionary>

Frames/FrameCutPageUC.xaml

@@ -7,120 +7,132 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
 
-   <!-- Definizione della FrameCutPage -->
-   <Grid Name="FrameCutPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
-      
-      <!-- Definizione della Grid superiore -->
-      <Grid Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
-         </Grid.ColumnDefinitions>
-         
-         <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
-            <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </ToggleButton>
-
-      </Grid>
-
-      <Grid Name="LeftGrid" Grid.Row="1">
-         <Grid.RowDefinitions>
+    <!-- Definizione della FrameCutPage -->
+    <Grid Name="FrameCutPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
             <RowDefinition Height="1*"/>
-            <RowDefinition Height="7*"/>
-         </Grid.RowDefinitions>
-      
-      <Grid Grid.Row="1">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="0.6*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="2.5*"/>
-         </Grid.RowDefinitions>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
-               Width="200" MaxDropDownHeight="300">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+        <!-- Definizione della Grid superiore -->
+        <Grid Grid.Column="1" Grid.Row="0" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+            </Grid.ColumnDefinitions>
 
-         <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="SelSectionBtn" 
-                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-                <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
             </Button>
-             
-            <Grid>
-               <Button Name="SelGuideBtn" 
+            <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
+                <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
+        </Grid>
+
+        <Grid Name="LeftGrid" Grid.Row="1">
+            <Grid.RowDefinitions>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="7*"/>
+            </Grid.RowDefinitions>
+
+            <Grid Grid.Row="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.6*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="1.7*"/>
+                </Grid.RowDefinitions>
+
+                <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
+               Width="200" MaxDropDownHeight="300">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="SelSectionBtn" 
+                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                        <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>
+
+                    <Grid>
+                        <Button Name="SelGuideBtn" 
                        Style="{DynamicResource OmagCut_YellowTextButton}"/>
-               <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-                  <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+                        <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                            <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                            <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
                              Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-                  <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                            <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                            <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
                              Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               </UniformGrid>
-            </Grid>  
-         </UniformGrid>
+                        </UniformGrid>
+                    </Grid>
+                </UniformGrid>
 
-         <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+                <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
+                <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="MirrorPartBtn" 
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="RemovePartBtn" 
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-         </UniformGrid>
+                <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="MirrorPartBtn" 
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                        <Image Source="{DynamicResource SpecchiaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                    <Button Name="RemovePartBtn" 
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                        <Image Source="{DynamicResource Rimuovi_eliminaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                </UniformGrid>
 
-         <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
+                <UniformGrid Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="CompoBtn" 
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                        <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                </UniformGrid>
+
+                <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
             Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
 
          <ComboBox Name="SawRoughingCmBx" Grid.Row="5" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}"
@@ -178,10 +190,10 @@
             </ComboBox.ItemTemplate>
          </ComboBox>-->
 
-      </Grid>
-         
-      </Grid>
+            </Grid>
 
-   </Grid>
+        </Grid>
+
+    </Grid>
 
 </UserControl>

Frames/FrameCutPageUC.xaml.vb

@@ -65,8 +65,8 @@ Public Class FrameCutPageUC
       SelGuideBtn.Content = EgtMsg(MSG_FRAMECUTPAGEUC + 16)     'Guida
       ArcRadTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 17)         'Rad
       ArcAngTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 18)         'Ang
-      MirrorPartBtn.Content = EgtMsg(MSG_FRAMECUTPAGEUC + 7)    'Mirror cornice
-      RemovePartBtn.Content = EgtMsg(MSG_FRAMECUTPAGEUC + 3)    'Rimuovi cornice
+      MirrorPartBtn.ToolTip = EgtMsg(MSG_FRAMECUTPAGEUC + 7)    'Mirror cornice
+      RemovePartBtn.ToolTip = EgtMsg(MSG_FRAMECUTPAGEUC + 3)    'Rimuovi cornice
       OffsZTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 8)           'Distanza sopra
       OffsXyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 9)          'Distanza inizio
       OffsYyTxBl.Text = EgtMsg(MSG_FRAMECUTPAGEUC + 22)         'Distanza Y
@@ -81,6 +81,8 @@ Public Class FrameCutPageUC
       m_ProjectMgr.CSVBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.VeinMatchingBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.RegisterBtn.Visibility = Windows.Visibility.Hidden
+      ' Visualizzo il bottone per l'importazione dei compo frame
+      CompoBtn.Visibility = If(GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile()) > 0, Visibility.Visible, Visibility.Hidden)
       ' Recupero dimensioni e kerf del grezzo
       m_nRawId = EgtGetFirstRawPart()
       GetRawBox(m_RawBox)
@@ -436,6 +438,16 @@ Public Class FrameCutPageUC
       End If
    End Sub
 
+   Private Sub CompoBtn_Click(sender As Object, e As RoutedEventArgs) Handles CompoBtn.Click
+      m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
+      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
+      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
+   End Sub
+
    Friend Function CreateFrame(nPartId As Integer) As Boolean
       If Not MyCreateFrame( nPartId) Then
          EgtErase( nPartId)

Machine/AlarmsPageUC.xaml

@@ -20,7 +20,7 @@
          <Grid.RowDefinitions>
             <RowDefinition Height="2*"/>
             <RowDefinition Height="0.5*"/>
-             
+
             <RowDefinition Height="1.5*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="1*"/>
@@ -30,195 +30,246 @@
             <RowDefinition Height="1*"/>
          </Grid.RowDefinitions>
 
-          <!--Costruisco le riche per la colonna 3-->
-            <Grid Grid.Column="2" Grid.RowSpan="9">
-                <Grid.RowDefinitions>
-                    <!--GruopBox: taglio lama-->
-                    <RowDefinition Height="1*"/>
-                    <RowDefinition Height="1*"/>
-                    <RowDefinition Height="1*"/>
-                    <RowDefinition Height="1*"/>
-                    <RowDefinition Height="1*"/>
-                    <!--GruopBoxs: Fresatura/>Foratura/WaterJet-->
-                    <RowDefinition Height="1*"/>
-                    <RowDefinition Height="1*"/>
-                    <RowDefinition Height="1*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="1*"/>
-                    <RowDefinition Height="1*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <!--GroupBox: vai ad Home-->
-                    <RowDefinition Height="1*"/>
-                    <RowDefinition Height="0.375*"/>
-                </Grid.RowDefinitions>
-                
-                <!--Parametri Taglio Lama: 5 Parametri-->
-                <GroupBox Name="SawGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.RowSpan="4">
-                    <!--definizione della grigli ainterna-->
-                    <Grid>
-                        <Grid.ColumnDefinitions>
-                            <ColumnDefinition Width="2*"/>
-                            <ColumnDefinition Width="2*"/>
-                        </Grid.ColumnDefinitions>
-                        <Grid.RowDefinitions>
-                            <RowDefinition Height="0.5*"/>
-                            <RowDefinition Height="0.5*"/>
-                            <RowDefinition Height="0.5*"/>
-                            <RowDefinition Height="0.5*"/>
-                            <RowDefinition Height="0.5*"/>
-                        </Grid.RowDefinitions>
+         <!--Costruisco le riche per la colonna 3-->
+         <Grid Grid.Column="2" Grid.RowSpan="9">
+            <Grid.RowDefinitions>
+               <!--GruopBox: taglio lama-->
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="1*"/>
+               <!--GruopBoxs: Fresatura/>Foratura/WaterJet-->
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="0.5*"/>
+               <!--GroupBox: vai ad Home-->
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="0.375*"/>
+            </Grid.RowDefinitions>
 
-                        <TextBlock Name="CutExtraLenTxBl" Grid.Column="0" Grid.Row="0"
+            <!--Parametri Taglio Lama: 5 Parametri-->
+            <GroupBox Name="SawGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.RowSpan="4">
+               <!--definizione della grigli ainterna-->
+               <Grid>
+                  <Grid.ColumnDefinitions>
+                     <ColumnDefinition Width="2*"/>
+                     <ColumnDefinition Width="2*"/>
+                  </Grid.ColumnDefinitions>
+                  <Grid.RowDefinitions>
+                     <RowDefinition Height="0.5*"/>
+                     <RowDefinition Height="0.5*"/>
+                     <RowDefinition Height="0.5*"/>
+                     <RowDefinition Height="0.5*"/>
+                     <RowDefinition Height="0.5*"/>
+                  </Grid.RowDefinitions>
+
+                  <TextBlock Name="CutExtraLenTxBl" Grid.Column="0" Grid.Row="0"
                                    Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                        <EgtWPFLib:EgtTextBox Name="CutExtraLenTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
+                  <EgtWPFLib:EgtTextBox Name="CutExtraLenTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
                                    Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
-                        <TextBlock Name="AngleCutExtraLenTxBl" Grid.Column="0" Grid.Row="1"
+                  <TextBlock Name="AngleCutExtraLenTxBl" Grid.Column="0" Grid.Row="1" 
                                    Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                        <EgtWPFLib:EgtTextBox Name="AngleCutExtraLenTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+                  <EgtWPFLib:EgtTextBox Name="AngleCutExtraLenTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0" IsLength="False"
                                    Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
-                        <TextBlock Name="ExtArcMinRadTxBl" Grid.Column="0" Grid.Row="2"
+                  <TextBlock Name="ExtArcMinRadTxBl" Grid.Column="0" Grid.Row="2"
                                    Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                        <EgtWPFLib:EgtTextBox Name="ExtArcMinRadTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+                  <EgtWPFLib:EgtTextBox Name="ExtArcMinRadTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
                                    Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                        <TextBlock Name="IntArcMaxSideAngTxBl" Grid.Column="0" Grid.Row="3"
+                  <TextBlock Name="IntArcMaxSideAngTxBl" Grid.Column="0" Grid.Row="3"
                                    Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                        <EgtWPFLib:EgtTextBox Name="IntArcMaxSideAngTxBx" Grid.Column="1" Grid.Row="3" Margin="10,0,10,0"
+                  <EgtWPFLib:EgtTextBox Name="IntArcMaxSideAngTxBx" Grid.Column="1" Grid.Row="3" Margin="10,0,10,0" IsLength="False"
                                    Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                        <TextBlock Name="PreCutExitTxBl" Grid.Column="0" Grid.Row="4"
+                  <TextBlock Name="PreCutExitTxBl" Grid.Column="0" Grid.Row="4"
                                    Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                        <CheckBox Name="PreCutExitChBx" Grid.Column="1" Grid.Row="4" Margin="10,0,10,0"
+                  <CheckBox Name="PreCutExitChBx" Grid.Column="1" Grid.Row="4" Margin="10,0,10,0"
                                   Style="{StaticResource OmagCut_CheckBox_Single}" 
-                                  HorizontalAlignment="Right"/>                        
-                        
-                    </Grid>
+                                  HorizontalAlignment="Right"/>
 
-                </GroupBox>
+               </Grid>
 
-                <Grid Grid.Column="2" Grid.Row="4" Grid.RowSpan="8">
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition />
-                        <ColumnDefinition />
-                    </Grid.ColumnDefinitions>
-                    <Grid.RowDefinitions>
-                        <RowDefinition Height="*"/>
-                        <RowDefinition Height="*"/>
-                        <RowDefinition Height="0.5*"/>
-                        <RowDefinition Height="*"/>
-                        <RowDefinition Height="*"/>
-                    </Grid.RowDefinitions>
+            </GroupBox>
 
-                    <!--Parametri fori: 4 Parametri-->
-                    <GroupBox Name="HolesGpBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="3" 
+            <Grid Grid.Column="2" Grid.Row="4" Grid.RowSpan="8">
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition />
+                  <ColumnDefinition />
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="*"/>
+                  <RowDefinition Height="*"/>
+                  <RowDefinition Height="0.5*"/>
+                  <RowDefinition Height="*"/>
+                  <RowDefinition Height="*"/>
+               </Grid.RowDefinitions>
+
+               <!--Parametri fori: 4 Parametri-->
+               <GroupBox Name="HolesGpBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="3" 
                               Style="{DynamicResource OmagCut_GroupBox}">
 
-                        <Grid>
-                            <Grid.ColumnDefinitions>
-                                <ColumnDefinition Width="145*"/>
-                                <ColumnDefinition Width="23*"/>
-                                <ColumnDefinition Width="169*"/>
-                            </Grid.ColumnDefinitions>
-                            <Grid.RowDefinitions>
-                                <RowDefinition Height="0.5*"/>
-                                <RowDefinition Height="0.5*"/>
-                                <RowDefinition Height="0.5*"/>
-                                <RowDefinition Height="0.5*"/>
-                            </Grid.RowDefinitions>
+                  <Grid>
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="145*"/>
+                        <ColumnDefinition Width="23*"/>
+                        <ColumnDefinition Width="169*"/>
+                     </Grid.ColumnDefinitions>
+                     <Grid.RowDefinitions>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                     </Grid.RowDefinitions>
 
-                            <TextBlock Name="HolesOffsetTxBl" Grid.Column="0" Grid.Row="0"
+                     <TextBlock Name="HolesOffsetTxBl" Grid.Column="0" Grid.Row="0"
                                        Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
-                            <EgtWPFLib:EgtTextBox Name="HolesOffsetTxBx" Grid.Column="2" Grid.Row="0" Margin="10,0,10,0"
+                     <EgtWPFLib:EgtTextBox Name="HolesOffsetTxBx" Grid.Column="2" Grid.Row="0" Margin="10,0,10,0"
                                        Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
-                            <TextBlock Name="HolesOverlapTxBl" Grid.Column="0" Grid.Row="1"
+                     <TextBlock Name="HolesOverlapTxBl" Grid.Column="0" Grid.Row="1"
                                        Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
-                            <EgtWPFLib:EgtTextBox Name="HolesOverlapTxBx" Grid.Column="2" Grid.Row="1" Margin="10,0,10,0"
+                     <EgtWPFLib:EgtTextBox Name="HolesOverlapTxBx" Grid.Column="2" Grid.Row="1" Margin="10,0,10,0"
                                        Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
-                            <TextBlock Name="HolesToleranceTxBl" Grid.Column="0" Grid.Row="2"
+                     <TextBlock Name="HolesToleranceTxBl" Grid.Column="0" Grid.Row="2"
                                        Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
-                            <EgtWPFLib:EgtTextBox Name="HolesToleranceTxBx" Grid.Column="2" Grid.Row="2" Margin="10,0,10,0"
+                     <EgtWPFLib:EgtTextBox Name="HolesToleranceTxBx" Grid.Column="2" Grid.Row="2" Margin="10,0,10,0"
                                        Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
-                            <TextBlock Name="OneHoleInCornerTxBl" Grid.Column="0" Grid.Row="3" Grid.ColumnSpan="3"
+                     <TextBlock Name="OneHoleInCornerTxBl" Grid.Column="0" Grid.Row="3" Grid.ColumnSpan="3"
                                        Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,10,0" />
-                            <CheckBox Name="OneHoleInCornerChBx" Grid.Column="2" Grid.Row="3" Style="{StaticResource OmagCut_CheckBox_Single}"
+                     <CheckBox Name="OneHoleInCornerChBx" Grid.Column="2" Grid.Row="3" Style="{StaticResource OmagCut_CheckBox_Single}"
                                       HorizontalAlignment="Right" Margin="10,0,10,0"/>
 
-                        </Grid>
+                  </Grid>
 
-                    </GroupBox>
+               </GroupBox>
 
-                    <!--Parametri Fresatura: 3 Parametri-->
-                    <GroupBox Name="MillingsParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="3" Grid.ColumnSpan="2" Grid.RowSpan="2">
-                        <Grid Grid.Column="3" Grid.Row="2">
-                            <Grid.ColumnDefinitions>
-                                <ColumnDefinition Width="2*"/>
-                                <ColumnDefinition Width="2*"/>
-                            </Grid.ColumnDefinitions>
-                            <Grid.RowDefinitions>
-                                <RowDefinition Height="*"/>
-                                <RowDefinition Height="*"/>
-                                <RowDefinition Height="*"/>
-                            </Grid.RowDefinitions>
+               <!--Parametri Fresatura: 3 Parametri-->
+               <GroupBox Name="MillingsParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="3" Grid.ColumnSpan="2" Grid.RowSpan="2">
+                  <Grid Grid.Column="3" Grid.Row="2">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="2*"/>
+                     </Grid.ColumnDefinitions>
+                     <Grid.RowDefinitions>
+                        <RowDefinition Height="*"/>
+                        <RowDefinition Height="*"/>
+                        <RowDefinition Height="*"/>
+                     </Grid.RowDefinitions>
 
-                            <TextBlock Name="CornerCutsTxBl" Grid.Row="0" Grid.ColumnSpan="2"
+                     <TextBlock Name="CornerCutsTxBl" Grid.Row="0" Grid.ColumnSpan="2"
                                        Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-                            <CheckBox Name="CornerCutsChBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                     <CheckBox Name="CornerCutsChBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
                                       HorizontalAlignment="Right" Margin="0,0,10,0"/>
 
-                            <TextBlock Name="InternalCutsTxBl" Grid.Row="1" Grid.ColumnSpan="2"
+                     <TextBlock Name="InternalCutsTxBl" Grid.Row="1" Grid.ColumnSpan="2"
                                        Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,0,10" VerticalAlignment="Bottom" />
-                            <CheckBox Name="InternalCutsChBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                     <CheckBox Name="InternalCutsChBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
                                       HorizontalAlignment="Right" Margin="0,0,10,0"/>
 
-                            <TextBlock Name="ShortTxBl" Grid.Column="0" Grid.Row="2"
+                     <TextBlock Name="ShortTxBl" Grid.Column="0" Grid.Row="2"
                                        Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                            <EgtWPFLib:EgtTextBox Name="ShortTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+                     <EgtWPFLib:EgtTextBox Name="ShortTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                        </Grid>
+                  </Grid>
 
-                    </GroupBox>
+               </GroupBox>
 
-                    <!--Parametri WaterJet: 1 Parametro (se questo GroupBox attivo allora nascondo Fori/Fresatura)-->
-                    <GroupBox Name="WjsParamGpBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="1" 
+               <!--Parametri rettifica tagli sottosquadra: 1 Parametro -->
+               <GroupBox Name="RectificationWJParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="2" >
+                   <Grid Grid.Column="3" Grid.Row="2">
+                       <Grid.ColumnDefinitions>
+                           <ColumnDefinition Width="2*"/>
+                           <ColumnDefinition Width="2*"/>
+                       </Grid.ColumnDefinitions>
+                       <Grid.RowDefinitions>
+                           <RowDefinition Height="*"/>
+                       </Grid.RowDefinitions>
+
+                       <TextBlock Name="EnableRectificationTxBl" Grid.Row="0" Grid.ColumnSpan="2"
+                                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                       <CheckBox Name="EnableRectificationChBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                                 HorizontalAlignment="Right" Margin="0,0,10,0"/>
+
+                       <!--<TextBlock Name="OffsetRectificationTxBl" Grid.Row="1" Grid.Column="0" 
+                                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
+                       <EgtWPFLib:EgtTextBox Name="OffsetRectificationTxBx" Grid.Row="1" Grid.Column="1" Margin="10,0,10,0"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>-->
+
+                   </Grid>
+
+               </GroupBox>
+
+               <!--Parametri WaterJet: 5 Parametro (se questo GroupBox attivo allora nascondo Fori/Fresatura)-->
+               <GroupBox Name="WjsParamGpBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Grid.RowSpan="4" 
                               Style="{DynamicResource OmagCut_GroupBox}">
-                        <Grid Grid.Column="3" Grid.Row="2">
-                            <Grid.ColumnDefinitions>
-                                <ColumnDefinition Width="2*"/>
-                                <ColumnDefinition Width="2*"/>
-                            </Grid.ColumnDefinitions>
-                            <Grid.RowDefinitions>
-                                <RowDefinition Height="*"/>
-                            </Grid.RowDefinitions>
+                  <Grid Grid.Column="3" Grid.Row="2">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="145*"/>
+                        <ColumnDefinition Width="23*"/>
+                        <ColumnDefinition Width="169*"/>
+                     </Grid.ColumnDefinitions>
+                     <Grid.RowDefinitions>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                        <RowDefinition Height="0.5*"/>
+                     </Grid.RowDefinitions>
 
-                            <TextBlock Name="WjIntCutsTxBl" Grid.Row="1" Grid.ColumnSpan="2"
-                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,0,10" VerticalAlignment="Bottom" />
-                            <CheckBox Name="WjIntCutsChBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
-                                      HorizontalAlignment="Right" Margin="0,0,10,0"/>
-                        
-                        </Grid>
-                    </GroupBox>
+                     <TextBlock Name="WjIntCutsTxBl" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="3"
+                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,10,0" />
+                     <CheckBox Name="WjIntCutsChBx" Grid.Column="2" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
+                                      HorizontalAlignment="Right" Margin="10,0,10,0"/>
 
-                </Grid>
+                     <TextBlock Name="HolesDiameterWJTxBl" Grid.Column="0" Grid.Row="1"
+                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
+                     <EgtWPFLib:EgtTextBox Name="HolesDiameterWJTxBx" Grid.Column="2" Grid.Row="1" Margin="10,0,10,0"
+                                       Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
-                <!--Parametri Taglio diretto: 1 Parametro-->
-                <GroupBox Name="DirectCutsParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.Row="12" Grid.RowSpan="2">
-                    <Grid>
-                        <TextBlock Name="FinalHomeTxBl"
-                                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-                        <CheckBox Name="FinalHomeChBx" Style="{StaticResource OmagCut_CheckBox_Single}"
-                                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
-                    </Grid>
+                     <TextBlock Name="HolesOffsetWJTxBl" Grid.Column="0" Grid.Row="2"
+                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
+                     <EgtWPFLib:EgtTextBox Name="HolesOffsetWJTxBx" Grid.Column="2" Grid.Row="2" Margin="10,0,10,0"
+                                       Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
-                </GroupBox>
+                     <TextBlock Name="MinRadiusWJTxBl" Grid.Column="0" Grid.Row="3"
+                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="2" Margin="10,0,10,0"/>
+                     <EgtWPFLib:EgtTextBox Name="MinRadiusWJTxBx" Grid.Column="2" Grid.Row="3" Margin="10,0,10,0"
+                                       Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+                     <TextBlock Name="OneHoleInCornerWJTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
+                                       Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="10,0,10,0" />
+                     <CheckBox Name="OneHoleInCornerWJChBx" Grid.Column="2" Grid.Row="4" Style="{StaticResource OmagCut_CheckBox_Single}"
+                                      HorizontalAlignment="Right" Margin="10,0,10,0"/>
+
+
+                  </Grid>
+               </GroupBox>
 
             </Grid>
-          
+
+            <!--Parametri Taglio diretto: 1 Parametro-->
+            <GroupBox Name="DirectCutsParamGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="2" Grid.Row="12" Grid.RowSpan="2">
+               <Grid>
+                  <TextBlock Name="FinalHomeTxBl"
+                                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+                  <CheckBox Name="FinalHomeChBx" Style="{StaticResource OmagCut_CheckBox_Single}"
+                                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
+               </Grid>
+
+            </GroupBox>
+
+         </Grid>
+
          <Grid Grid.RowSpan="3">
             <Grid.RowDefinitions>
                <RowDefinition Height="1.75*"/>
@@ -292,15 +343,15 @@
                   <TextBlock Name="CurrCupWheelTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
                      Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                      Visibility="Hidden"/>
-                        <ComboBox Name="CurrCupWheelCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
-                            <ComboBox.ItemTemplate>
-                                <DataTemplate>
-                                    <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                                </DataTemplate>
-                            </ComboBox.ItemTemplate>
-                        </ComboBox>
+                  <ComboBox Name="CurrCupWheelCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
+                     <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                           <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                     </ComboBox.ItemTemplate>
+                  </ComboBox>
 
-                        <TextBlock Name="CurrWJetTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
+                  <TextBlock Name="CurrWJetTxBl" Grid.Column="0" Grid.Row="4" Grid.ColumnSpan="3"
                      Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                      Visibility="Hidden"/>
                   <ComboBox Name="CurrWJetCmBx" Grid.Column="1" Grid.Row="5" Style="{StaticResource OmagCut_ComboBox}" Visibility="Hidden">
@@ -479,9 +530,9 @@
                <EgtWPFLib:EgtTextBox Name="CurrSawingTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_FixedTextBox}" />
 
-                  <TextBlock Name="CurrDrillingTxBl" Grid.Column="0" Grid.Row="1"
+               <TextBlock Name="CurrDrillingTxBl" Grid.Column="0" Grid.Row="1"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="CurrDrillingTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+               <EgtWPFLib:EgtTextBox Name="CurrDrillingTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                Style="{DynamicResource OmagCut_FixedTextBox}" />
 
                <TextBlock Name="CurrMillingTxBl" Grid.Column="0" Grid.Row="2"
@@ -496,8 +547,18 @@
 
                <TextBlock Name="CurrWaterJettingTxBl" Grid.Column="0" Grid.Row="4"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CurrWaterJettingTxBx" Grid.Column="1" Grid.Row="4" Margin="10,0,10,0"
-                  Style="{DynamicResource OmagCut_FixedTextBox}" />
+
+               <Grid Grid.Column="1" Grid.Row="4">
+                  <Grid.ColumnDefinitions>
+                     <ColumnDefinition Width="5*"/>
+                     <ColumnDefinition Width="1.5*"/>
+                  </Grid.ColumnDefinitions>
+                  <EgtWPFLib:EgtTextBox Name="CurrWaterJettingTxBx" Grid.Column="0" Margin="10,0,5,0"
+                                         Style="{DynamicResource OmagCut_FixedTextBox}" />
+                  <EgtWPFLib:EgtTextBox Name="CurrWaterJettingQualityTxBx" Grid.Column="1" Margin="0,0,10,0"
+                                         Style="{DynamicResource OmagCut_FixedTextBox}" />
+               </Grid>
+
 
                <TextBlock Name="CurrDripSawingTxBl" Grid.Column="0" Grid.Row="5"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
@@ -614,7 +675,7 @@
                <Grid.RowDefinitions>
                   <RowDefinition Height="0.5*"/>
                   <RowDefinition Height="0.5*"/>
-                  <RowDefinition Height="0.5*"/> 
+                  <RowDefinition Height="0.5*"/>
                   <RowDefinition Height="0.5*"/>
                </Grid.RowDefinitions>
 
@@ -623,27 +684,27 @@
                <CheckBox Name="CompleteCutsChBx" Grid.Column="0" Grid.Row="0" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_CheckBox_Single}"
                   HorizontalAlignment="Right" Margin="0,0,10,0"/>
 
-                <!--Allineato-->
+               <!--Allineato-->
                <TextBlock Name="AlignTxBl" Grid.Row="1" Grid.ColumnSpan="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
                <CheckBox Name="AlignChBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
                   HorizontalAlignment="Right" Margin="0,0,10,0"/>
 
-                <!--Ghigliottina-->
-                <TextBlock Name="GhigliottinaTxBl" Grid.Row="2" Grid.ColumnSpan="2"
+               <!--Ghigliottina-->
+               <TextBlock Name="GhigliottinaTxBl" Grid.Row="2" Grid.ColumnSpan="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
                <CheckBox Name="GhigliottinaChBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
                   HorizontalAlignment="Right" Margin="0,0,10,0"/>
-                
-                <!--Automatico-->
+
+               <!--Automatico-->
                <TextBlock Name="AutomaticTxBl" Grid.Row="3" Grid.ColumnSpan="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
                <CheckBox Name="AutomaticChBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
                   HorizontalAlignment="Right" Margin="0,0,10,0"/>
 
-               
 
-                </Grid>
+
+            </Grid>
 
          </GroupBox>
 
@@ -661,9 +722,9 @@
 
                <Grid Grid.ColumnSpan="2">
                   <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="0.5*"/>
-                        <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="0.5*"/>
+                     <ColumnDefinition Width="0.5*"/>
+                     <ColumnDefinition Width="2*"/>
+                     <ColumnDefinition Width="0.5*"/>
                   </Grid.ColumnDefinitions>
 
                   <Button Name="BackImageBtn" Grid.Column="1"
@@ -702,13 +763,13 @@
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
                <TextBlock Name="CfrPercTxBl" Grid.Column="0" Grid.Row="1"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="CfrPercTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+               <EgtWPFLib:EgtTextBox Name="CfrPercTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0" IsLength="False"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             </Grid>
 
          </GroupBox>
 
-          <!--Incisioni--> 
+         <!--Incisioni-->
          <GroupBox Name="TopMillGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3"
             Grid.Row="3" Grid.RowSpan="3">
             <Grid>
@@ -722,17 +783,17 @@
                   <RowDefinition Height="0.5*"/>
                </Grid.RowDefinitions>
 
-                <!--Utilizza fresa-->
+               <!--Utilizza fresa-->
                <TextBlock Name="TmEnableTxBl" Grid.Column="0" Grid.Row="0"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
                <CheckBox Name="TmEnableChBx" Grid.Column="1" Grid.Row="0" Style="{DynamicResource OmagCut_CheckBox_Single}"
                   HorizontalAlignment="Right" Margin="10,0,10,0"/>
-                <!--Affondamento-->
+               <!--Affondamento-->
                <TextBlock Name="TmDepthTxBl" Grid.Column="0" Grid.Row="1"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                <EgtWPFLib:EgtTextBox Name="TmDepthTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-                <!--Larghezza-->
+               <!--Larghezza-->
                <TextBlock Name="TmWidthTxBl" Grid.Column="0" Grid.Row="2"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
                <EgtWPFLib:EgtTextBox Name="TmWidthTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
@@ -774,30 +835,43 @@
 
          <!--Cornici-->
          <GroupBox Name="FrameGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="3" Grid.Row="8">
-                <Grid >
-                 <Grid.ColumnDefinitions>
-                     <ColumnDefinition Width="2*"/>
-                     <ColumnDefinition Width="1*"/>
-                 </Grid.ColumnDefinitions>
+            <Grid >
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="1*"/>
+               </Grid.ColumnDefinitions>
 
-                 <TextBlock Name="FramePauseTxBl" Grid.Column="0" Grid.Row="0"
+               <TextBlock Name="FramePauseTxBl" Grid.Column="0" Grid.Row="0"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
-                 <CheckBox Name="FramePauseChBx" Grid.Column="1" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
+               <CheckBox Name="FramePauseChBx" Grid.Column="1" Grid.Row="0" Style="{StaticResource OmagCut_CheckBox_Single}"
                HorizontalAlignment="Right" Margin="0,0,10,0"/>
-             </Grid>
+            </Grid>
 
          </GroupBox>
 
-            <UniformGrid Columns="4" Grid.Row="8">
+         <Grid Grid.Column="0" Grid.Row="8">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="2.5*"/>
+               <ColumnDefinition Width="2.5*"/>
+               <ColumnDefinition Width="4.5*"/>
+               <ColumnDefinition Width="1.8*"/>
+            </Grid.ColumnDefinitions>
             <Button x:Name="SawProbingBtn"
-         	   Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+         	         Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
                <Image Source="{DynamicResource SawProbeImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
             </Button>
+            <Button x:Name="ExecLuaBtn" Grid.Column="1"
+         	         Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+               <Image Source="{DynamicResource PlayImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+            </Button>
 
-         </UniformGrid>
+            <TextBlock Name="UseLaserOriginTxBl" Grid.Column="2"
+                  Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+            <CheckBox Name="UseLaserOriginChBx" Style="{DynamicResource OmagCut_CheckBox_Single}" Grid.Column="3"
+                  HorizontalAlignment="Right" Margin="0,0,10,0"/>
+         </Grid>
 
       </Grid>
-
    </Border>
 
 </UserControl>

Machine/AlarmsPageUC.xaml.vb

@@ -29,7 +29,7 @@ Public Class AlarmsPageUC
 
    Private Sub AlarmsPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
 
-      'Assegno liste a combobox
+      ' Assegno liste a combobox
       CurrSawCmBx.ItemsSource = m_SawList
       CurrDrillCmBx.ItemsSource = m_DrillList
       CurrMillCmBx.ItemsSource = m_MillList
@@ -37,14 +37,24 @@ Public Class AlarmsPageUC
       CurrWJetCmBx.ItemsSource = m_WaterJetList
       AuxiliaryToolCmBx.ItemsSource = m_AuxToolTypeList
 
+      ' Variabile che accorcia il riferimento alla macchina corrente
+      m_CurrentMachine = m_MainWindow.m_CurrentMachine
+
       ' Assegno lista ad elenco materiali
-      MaterialsLstBx.ItemsSource = m_MainWindow.m_CurrentMachine.Materials
+      MaterialsLstBx.ItemsSource = m_CurrentMachine.Materials
 
       ' Se non è impostato il controllo numerico, nascondo il bottone di tastatura lama
       If GetPrivateProfileInt(S_NUMERICALCONTROL, K_TYPE, 0, m_MainWindow.GetMachIniFile()) = 0 Then
          SawProbingBtn.Visibility = Windows.Visibility.Hidden
       End If
 
+      ' Se esiste un file lua valido allora mostro il pulsante per l'esecuzione dello script
+      If Not String.IsNullOrEmpty(GetExecLuaFile()) And
+         ExecLuaBtn.Visibility = Visibility.Visible Then
+      Else
+         ExecLuaBtn.Visibility = Visibility.Hidden
+      End If
+
       ' Imposto i messaggi letti dal file dei messaggi
       CurrSawTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 1)
       AuxiliaryToolTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 2)
@@ -81,7 +91,16 @@ Public Class AlarmsPageUC
       TmDepthTxBl.Text = EgtMsg( 91063)                                  ' Profondità
       TmWidthTxBl.Text = EgtMsg( 91064)                                  ' Larghezza
       WJsParamGpBx.Header = EgtMsg( 91058)                               ' Parametri waterjet
-      WjIntCutsTxBl.Text = EgtMsg( 90930)                                ' Sempre sugli interni
+      WjIntCutsTxBl.Text = EgtMsg(90930)                                 ' Sempre sugli interni
+      '-- INIZIO -- nuovi parametri per preforo lavello
+      HolesDiameterWJTxBl.Text = "Diameter"
+      HolesOffsetWJTxBl.Text = "Offset"
+      MinRadiusWJTxBl.Text = "Min Radius"
+      OneHoleInCornerWJTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 26)
+      '-- INIZIO -- nuovi parametro Rettifica tagli sottosquadra WJ
+      REctificationWJParamGpBx.Header = "Rectification"
+      EnableRectificationTxBl.Text = "Enable (on subsquare angle)"
+      '--  FINE  -- nuovi parametro Rettifica tagli sottosquadra WJ
       NestingParamGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 31)            ' Nesting
       AlignTxBl.Text = EgtMsg(90932)                                     ' Allineato
       GhigliottinaTxBl.Text = EgtMsg(91066)                              ' Ghigliottina
@@ -109,14 +128,21 @@ Public Class AlarmsPageUC
       CurrDripDrillingTxBl.Text = EgtMsg(MSG_ALARMS2PAGEUC + 6)          ' DripDrilling
       FrameGpBx.Header = EgtMsg(91068)                                   ' Cornici
       FramePauseTxBl.Text = EgtMsg(91067)                                ' Inserisci pausa
+      UseLaserOriginTxBl.Text = EgtMsg(91129)                            ' Usa laser per origine
       AutoRawImageParamGpBx.Visibility = Windows.Visibility.Hidden
    End Sub
 
    Private Sub AlarmsPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
 
       If m_bFirst Then
-         ' Variabile che accorcia il riferimento alla macchina corrente
-         m_CurrentMachine = m_MainWindow.m_CurrentMachine
+
+         ' in assenza dell'uscita H1 nascondo i parametri lama
+         If EgtGetHeadId("H1") = GDB_ID.NULL Then
+            SawGpBx.Visibility = Visibility.Hidden
+            TopMillGpBx.Visibility = Visibility.Hidden
+            CurrSawTxBl.Visibility = Visibility.Hidden
+            CurrSawCmBx.Visibility = Visibility.Hidden
+         End If
 
          ' Verifico la configurazione della macchina per creare i combobox
          Select Case m_CurrentMachine.MountedToolConfig
@@ -132,7 +158,7 @@ Public Class AlarmsPageUC
                ' Disattivo il gruppo dei parametri fori
                HolesGpBx.Visibility = Windows.Visibility.Hidden
             Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL
-               'Non faccio alcunchè
+            'Non faccio alcunchè
             Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER
                'Da implementare
          End Select
@@ -151,7 +177,8 @@ Public Class AlarmsPageUC
 
          ' Se non previsti tagli waterjet, disabilito relativo box
          If Not m_CurrentMachine.bWaterJetting Then
-            WJsParamGpBx.Visibility = Visibility.Hidden
+            WjsParamGpBx.Visibility = Visibility.Hidden
+            RectificationWJParamGpBx.Visibility = Visibility.Hidden
          End If
 
          ' Abilitazione box per contorni grezzo da foto
@@ -164,7 +191,7 @@ Public Class AlarmsPageUC
          End If
 
          ' Abilitazione Feed ridotta su inizio/fine tagli
-         If m_CurrentMachine.bFsevEnable Then
+         If m_CurrentMachine.bFsevEnable And EgtGetHeadId("H1") <> GDB_ID.NULL Then
             CutFredGpBx.Visibility = Windows.Visibility.Visible
          Else
             CutFredGpBx.Visibility = Windows.Visibility.Hidden
@@ -184,6 +211,11 @@ Public Class AlarmsPageUC
       ' Seleziono lama corrente
       CurrSawCmBx.SelectedItem = m_CurrentMachine.sCurrSaw
 
+      ' nascondo la lista dei materiali solo se macchina WaterJet
+      If m_CurrentMachine.bWaterJet Then
+         MaterialsGpBx.Visibility = Visibility.Hidden
+      End If
+
       ' Verifico la configurazione della macchina per creare i combobox
       Select Case m_CurrentMachine.MountedToolConfig
          Case CurrentMachine.MountedToolConfigs.SAW
@@ -311,12 +343,24 @@ Public Class AlarmsPageUC
       EgtMdbSave()
       ' Leggo lavorazione angoli con fresa
       CornerCutsChBx.IsChecked =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
       ' Leggo lavorazione interni con fresa
       InternalCutsChBx.IsChecked =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
       WjIntCutsChBx.IsChecked =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
+      ' Lavorazione preforo lavello con WaterJet
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_HOLES_DIAMITERWJ, 0, m_MainWindow.GetMachIniFile())
+      HolesDiameterWJTxBx.Text = LenToString(dVal, 2)
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_HOLES_OFFSETWJ, 0, m_MainWindow.GetMachIniFile())
+      HolesOffsetWJTxBx.Text = LenToString(dVal, 2)
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MIN_RADIUSWJ, 0, m_MainWindow.GetMachIniFile())
+      MinRadiusWJTxBx.Text = LenToString(dVal, 2)
+      OneHoleInCornerWJChBx.IsChecked =
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
+      ' leggo se attiva la rettifica degli angoli per WaterJet
+      EnableRectificationChBx.IsChecked =
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, 0, m_MainWindow.GetMachIniFile()) <> 0)
       ' Leggo accorciamento angoli con fresa
       dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
       ShortTxBx.Text = LenToString(dVal, 2)
@@ -329,7 +373,7 @@ Public Class AlarmsPageUC
       dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_ENGRAVING_WIDTH, 0, m_MainWindow.GetMachIniFile())
       TmWidthTxBx.Text = LenToString(dVal, 2)
       ' Flag per movimento in home alla fine dei tagli diretti
-      FinalHomeChBx.IsChecked = m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome
+      FinalHomeChBx.IsChecked = m_CurrentMachine.bDirectCutsFinalHome
       ' Leggo tagli ridotti per interferenza in nesting
       CompleteCutsChBx.IsChecked =
              (GetPrivateProfileInt(S_MACH_NEST, K_MACH_REDUCEDCUT, 0, m_MainWindow.GetMachIniFile()) = 0)
@@ -351,7 +395,7 @@ Public Class AlarmsPageUC
          AdditionalTableTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 36) & " " & GetCurrentTable().ToString()
       End If
       ' Leggo altezza sovratavola
-      dVal = m_MainWindow.m_CurrentMachine.dAdditionalTable
+      dVal = m_CurrentMachine.dAdditionalTable
       AdditionalTableTxBx.Text = LenToString(dVal, 2)
       ' Leggo soglia e tolleranza per contorno grezzo da foto
       ThresholdTxBx.Text = m_MainWindow.m_Camera.Threshold.ToString()
@@ -369,11 +413,22 @@ Public Class AlarmsPageUC
       If nWashing = -1 Then
          WashingGpBx.Visibility = Visibility.Hidden
       Else
-         WashingChBx.IsChecked = ( nWashing <> 0)
+         WashingChBx.IsChecked = (nWashing <> 0)
       End If
       ' Leggo parametri per variazione feed in tagli
       CfrLenTxBx.Text = LenToString(m_CurrentMachine.dFsevLength, 3)
       CfrPercTxBx.Text = DoubleToString(m_CurrentMachine.dFsevPerc, 0)
+
+      ' leggo flag per tavola definita da laser
+      Dim nUseLaserOrigin As Integer = GetPrivateProfileInt(S_TABLE, K_USELASERORIGIN, -1, m_MainWindow.GetMachIniFile())
+      If nUseLaserOrigin = -1 Then
+         UseLaserOriginTxBl.Visibility = Visibility.Hidden
+         UseLaserOriginChBx.Visibility = Visibility.Hidden
+      Else
+         UseLaserOriginTxBl.Visibility = Visibility.Visible
+         UseLaserOriginChBx.IsChecked = (nUseLaserOrigin <> 0)
+      End If
+
    End Sub
 
    ' aggiorna le text delle lavorazioni (la selezione avviene nella pagina del grezzo o dalla pagina del progetto corrente)
@@ -414,9 +469,26 @@ Public Class AlarmsPageUC
          CurrWaterJettingTxBx.Text = m_CurrentMachine.sCurrWaterJetting
          CurrWaterJettingTxBl.Visibility = Windows.Visibility.Visible
          CurrWaterJettingTxBx.Visibility = Windows.Visibility.Visible
+         If m_CurrentMachine.bFromDBWaterJet Then
+            CurrWaterJettingTxBx.SetValue(Grid.ColumnSpanProperty, 1)
+            CurrWaterJettingTxBx.SetValue(MarginProperty, New Thickness(CurrWaterJettingTxBx.Margin.Left,
+                                                                        CurrWaterJettingTxBx.Margin.Top,
+                                                                        5,
+                                                                        CurrWaterJettingTxBx.Margin.Bottom))
+            CurrWaterJettingQualityTxBx.Text = m_CurrentMachine.sCurrWaterJettingQuality
+            CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Visible
+         Else
+            CurrWaterJettingTxBx.SetValue(Grid.ColumnSpanProperty, 2)
+            CurrWaterJettingTxBx.SetValue(MarginProperty, New Thickness(CurrWaterJettingTxBx.Margin.Left,
+                                                                        CurrWaterJettingTxBx.Margin.Top,
+                                                                        10,
+                                                                        CurrWaterJettingTxBx.Margin.Bottom))
+            CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Collapsed
+         End If
       Else
          CurrWaterJettingTxBl.Visibility = Windows.Visibility.Hidden
          CurrWaterJettingTxBx.Visibility = Windows.Visibility.Hidden
+         CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Hidden
       End If
       If m_CurrentMachine.sCurrDripSawing <> String.Empty Then
          CurrDripSawingTxBx.Text = m_CurrentMachine.sCurrDripSawing
@@ -536,6 +608,33 @@ Public Class AlarmsPageUC
          String.Compare(sMchTool, m_CurrentMachine.sCurrSaw, True) <> 0 Then
          m_CurrentMachine.sCurrSawing = String.Empty
       End If
+
+      'Dim sVal As String = String.Empty
+      'Dim dVal As Double = 0
+      'If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSawing, false) Then
+      '   StringToDouble(sVal, dVal)
+      '   m_CurrentMachine.SetFsevLength(dVal)
+      'End If
+      'If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSawing, false) Then
+      '   StringToDouble(sVal, dVal)
+      '   m_CurrentMachine.SetFsevPerc(dVal)
+      'End If
+
+      Dim sVal As String = String.Empty
+      Dim dVal As Double = 0
+      If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, dVal)
+         m_CurrentMachine.SetFsevLength(dVal)
+      End If
+      If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, dVal)
+         m_CurrentMachine.SetFsevPerc(dVal)
+      End If
+
+      ' Leggo parametri per variazione feed in tagli aggiornati in funzione della lama
+      CfrLenTxBx.Text = LenToString(m_CurrentMachine.dFsevLength, 3)
+      CfrPercTxBx.Text = DoubleToString(m_CurrentMachine.dFsevPerc, 0)
+
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
       ' aggiorno la lista delle lavorazioni
@@ -549,7 +648,7 @@ Public Class AlarmsPageUC
       If CurrDrillCmBx.SelectedItem.ToString() = NO_TOOL Then
          m_CurrentMachine.sCurrDrill = String.Empty
          m_CurrentMachine.sCurrDrilling = String.Empty
-      ' Assegno foretto
+         ' Assegno foretto
       Else
          m_CurrentMachine.sCurrDrill = CurrDrillCmBx.SelectedItem.ToString()
          ' Reset fresa, waterjet e relative lavorazioni
@@ -584,7 +683,7 @@ Public Class AlarmsPageUC
       If CurrMillCmBx.SelectedItem.ToString() = NO_TOOL Then
          m_CurrentMachine.sCurrMill = String.Empty
          m_CurrentMachine.sCurrMilling = String.Empty
-      ' Assegno fresa
+         ' Assegno fresa
       Else
          m_CurrentMachine.sCurrMill = CurrMillCmBx.SelectedItem.ToString()
          ' Reset foretto, waterjet e relative lavorazioni
@@ -654,7 +753,7 @@ Public Class AlarmsPageUC
       If CurrWJetCmBx.SelectedItem.ToString() = NO_TOOL Then
          m_CurrentMachine.sCurrWaterJet = String.Empty
          m_CurrentMachine.sCurrWaterJetting = String.Empty
-      ' Assegno Waterjet
+         ' Assegno Waterjet
       Else
          m_CurrentMachine.sCurrWaterJet = CurrWJetCmBx.SelectedItem.ToString()
          ' Reset foretto, fresa e relative lavorazioni
@@ -851,13 +950,51 @@ Public Class AlarmsPageUC
       End If
    End Sub
 
+   ' -- INIZIO -- nuovi parametri per prefori WaterJet
+   Private Sub HolesDiameterWJTxBx_Click(sender As Object, e As EventArgs) Handles HolesDiameterWJTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(HolesDiameterWJTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_HOLES_DIAMITERWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub HolesOffsetWJTxBx_Click(sender As Object, e As EventArgs) Handles HolesOffsetWJTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(HolesOffsetWJTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_HOLES_OFFSETWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub MinRadiusWJTxBx_Click(sender As Object, e As EventArgs) Handles MinRadiusWJTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(MinRadiusWJTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_MIN_RADIUSWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub OneHoleInCornerWJChBx_Click(sender As Object, e As EventArgs) Handles OneHoleInCornerWJChBx.Click
+      If OneHoleInCornerWJChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+   ' --   FINE   -- nuovi parametri per prefori WaterJet
+
+   ' -- INIZIO -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+   Private Sub EnableRectificationChBx_Click(sender As Object, e As EventArgs) Handles EnableRectificationChBx.Click
+      If EnableRectificationChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "1", m_MainWindow.GetMachIniFile)
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "0", m_MainWindow.GetMachIniFile)
+      End If
+   End Sub
+   ' --   FINE   -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+
    Private Sub TmEnableChBx_Click(sender As Object, e As RoutedEventArgs) Handles TmEnableChBx.Click
       If TmEnableChBx.IsChecked() Then
          WritePrivateProfileString(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, "1", m_MainWindow.GetMachIniFile())
       Else
          WritePrivateProfileString(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, "0", m_MainWindow.GetMachIniFile())
       End If
-   End Sub 
+   End Sub
 
    Private Sub TmDepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles TmDepthTxBx.EgtClosed
       Dim dVal As Double = 0
@@ -873,9 +1010,9 @@ Public Class AlarmsPageUC
 
    Private Sub FinalHomeChBx_Click(sender As Object, e As RoutedEventArgs) Handles FinalHomeChBx.Click
       If FinalHomeChBx.IsChecked() Then
-         m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome = True
+         m_CurrentMachine.bDirectCutsFinalHome = True
       Else
-         m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome = False
+         m_CurrentMachine.bDirectCutsFinalHome = False
       End If
    End Sub
 
@@ -917,7 +1054,7 @@ Public Class AlarmsPageUC
    Private Sub AdditionalTableTxBx_EgtClosed(sender As Object, e As EventArgs) Handles AdditionalTableTxBx.EgtClosed
       Dim dVal As Double = 0
       StringToLen(AdditionalTableTxBx.Text, dVal)
-      m_MainWindow.m_CurrentMachine.dAdditionalTable = dVal
+      m_CurrentMachine.dAdditionalTable = dVal
    End Sub
 
    Private Sub NewMatBtn_Click(sender As Object, e As RoutedEventArgs) Handles NewMatBtn.Click
@@ -993,6 +1130,14 @@ Public Class AlarmsPageUC
       End If
    End Sub
 
+   Private Sub UseLaserOriginChBx_Click() Handles UseLaserOriginChBx.Click
+      If UseLaserOriginChBx.IsChecked() Then
+         WritePrivateProfileString(S_TABLE, K_USELASERORIGIN, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_TABLE, K_USELASERORIGIN, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+
    Private Sub WashingChBx_Click(sender As Object, e As RoutedEventArgs) Handles WashingChBx.Click
       If WashingChBx.IsChecked() Then
          WritePrivateProfileString(S_MACH_NEST, K_MACH_WASHING, "1", m_MainWindow.GetMachIniFile())
@@ -1026,8 +1171,20 @@ Public Class AlarmsPageUC
    End Sub
 
    Private Sub SawProbingBtn_Click(sender As Object, e As RoutedEventArgs) Handles SawProbingBtn.Click
+      ' imposto modo automatico
+      Select Case m_MainWindow.m_CNCommunication.m_nNCType
+         Case 1, 2
+            ' in attesa di verifica 
+         Case 3
+            Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(0)
+            EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+         Case 4
+            ' FANUC - Manual:7, Edit:1
+            Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(7)
+            EgtOutLog("Impostata modalità manuale: esito " & nResult.ToString)
+      End Select
       ' Recupero file LUA
-      EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\SawProbing.lua")
+      EgtLuaExecFile(m_CurrentMachine.sMachDir() & "\DirectCmd\SawProbing.lua")
       ' Recupero utensile da tastare
       Dim ToolForProbing As ToolPos = ChooseToolForProbing()
       If IsNothing(ToolForProbing) OrElse String.IsNullOrWhiteSpace(ToolForProbing.m_ToolName) Then Return
@@ -1047,6 +1204,12 @@ Public Class AlarmsPageUC
       EgtLuaSetGlobNumVar("CMD.THICK", dToolThick * 1000)
       EgtTdbGetCurrToolParam(MCH_TP.LEN, dToolLen)
       EgtLuaSetGlobNumVar("CMD.LENGTH", dToolLen * 1000)
+      ' Nuova varibile per gestione tastatura utensili Frankfurt (Polishing)
+      Dim nType As Integer
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      If m_CurrentMachine.bPolishingWheel AndAlso nType = MCH_TY.MILL_POLISHING Then
+         EgtLuaSetGlobStringVar("CMD.POLISHING", "1")
+      End If
       EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
       EgtLuaCallFunction("CMD.CmdString")
       ' Leggo variabili
@@ -1066,7 +1229,7 @@ Public Class AlarmsPageUC
       ' Modifico stringa per inserire i newline
       CmdString = CmdString.Replace("<br/>", Environment.NewLine)
       ' Creo file...
-      Dim FilePath As String = m_MainWindow.GetCncDir() & "\SawProbing" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+      Dim FilePath As String = m_MainWindow.GetCncDir() & "\SawProbing" & m_CurrentMachine.sIsoFileExt
       ' ...e ci scrivo
       Dim Writer As New IO.StreamWriter(FilePath, False)
       Writer.Write(CmdString)
@@ -1090,6 +1253,11 @@ Public Class AlarmsPageUC
          Return
       End If
       m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      ' Se fanuc passo in modalità AUTO e attivo
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(0)
+         EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+      End If
       ' Aspetto e lo avvio
       System.Threading.Thread.Sleep(300)
       m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
@@ -1139,6 +1307,10 @@ Public Class AlarmsPageUC
          Dim bRead As Boolean = False
          Dim SawDiameterNameVar As String = String.Empty
          GetPrivateProfileString(S_MACH_PROBING, K_SAWDIAMETER, "", SawDiameterNameVar, m_MainWindow.GetMachIniFile())
+         ' Se utensile non lama, allora la variabile in cui leggo il dato potrebbe essere differente
+         If Not ToolForProbing.m_IsSaw Then
+            GetPrivateProfileString(S_MACH_PROBING, K_TOOLLENGTH, SawDiameterNameVar, SawDiameterNameVar, m_MainWindow.GetMachIniFile())
+         End If
          m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
          For I As Integer = 0 To 20
             ' Devo rileggere la variabile ad ogni ciclo
@@ -1147,7 +1319,10 @@ Public Class AlarmsPageUC
             If m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
                bRead = True
                Dim dVal As Double = m_MainWindow.m_CNCommunication.m_CN.d_DReadELS_value
-               dVal = dVal / 1000
+               ' Se fanuc il dato è in mm (NON MICRON)
+               If m_MainWindow.m_CNCommunication.m_nNCType <> 4 Then
+                  dVal = dVal / 1000
+               End If
                MsgBoxStateInfo.LoadingPrBr_Value = 100
                ' Tastatura conclusa con successo
                Dim sOut As String = EgtMsg(MSG_DIRECTCUTPAGEUC + 43) & " : " & DoubleToString(dVal, 1)
@@ -1194,9 +1369,9 @@ Public Class AlarmsPageUC
    End Sub
 
    Private Function ChooseToolForProbing() As ToolPos
-      Select Case m_MainWindow.m_CurrentMachine.MountedToolConfig
+      Select Case m_CurrentMachine.MountedToolConfig
          Case CurrentMachine.MountedToolConfigs.SAW
-            Return New ToolPos(m_MainWindow.m_CurrentMachine.sCurrSaw, "T100", True)
+            Return New ToolPos(m_CurrentMachine.sCurrSaw, "T100", True)
          Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL, CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER
             Dim ChooseTool As New ChooseToolWD(m_MainWindow)
             If ChooseTool.ShowDialog Then
@@ -1242,4 +1417,36 @@ Public Class AlarmsPageUC
 
    End Sub
 
+   Private Sub ExecLuaBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExecLuaBtn.Click
+      Dim sExecFile As String = GetExecLuaFile()
+      ' Eseguo file LUA e recupero risultato
+      Dim nErr As Integer = 999
+      EgtLuaExecFile(sExecFile)
+      EgtLuaGetGlobIntVar("ELS.ERR", nErr)
+      ' Reset lua
+      EgtLuaResetGlobVar("ELS")
+      ' Verifico condizioni di errore
+      If nErr Then
+         ' Errore...
+         EgtOutLog("Error executing file: " & sExecFile & ", ELS.ERR=" & nErr.ToString)
+         ' Error executing script
+         Dim MsgBoxError As New EgtMsgBox(m_MainWindow, "", EgtMsg(90259), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+         Return
+      End If
+   End Sub
+
+   ' Recupero il percorso del file lua da eseguire
+   Private Function GetExecLuaFile() As String
+      Dim sFile As String = String.Empty
+      If GetPrivateProfileString(S_EXECLUA, K_FILESCRIPT_LUA, "", sFile, m_MainWindow.GetMachIniFile()) <> 0 Then
+         ' Sistemo nome file
+         sFile = sFile.Trim()
+         If Not sFile.EndsWith(".lua") Then sFile = sFile & ".lua"
+         ' Creo path
+         Dim sPath As String = m_CurrentMachine.sMachDir() & "\Scripts\" & sFile
+         If File.Exists(sPath) Then Return sPath
+      End If
+      Return String.Empty
+   End Function
+
 End Class

Machine/ChooseToolWD.xaml

@@ -3,9 +3,11 @@
     xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
     xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
     FontFamily="{DynamicResource OmagCut_Font}"
-    Title="OpenFile" Height="682.6" Width="426.6" WindowStyle="None" ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" Background="Transparent">
+    Title="OpenFile" Height="682.6" Width="426.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
 
-   <Border Style="{DynamicResource OmagCut_Border}">
+    <Border Style="{DynamicResource OmagCut_Border}">
       <Grid>
          <Grid.ColumnDefinitions>
             <ColumnDefinition Width="0.5*"/>

Machine/CurrentMachine.vb

@@ -1,4 +1,5 @@
 Imports System.Collections.ObjectModel
+Imports EgtWPFLib5
 Imports EgtUILib
 
 Public Class CurrentMachine
@@ -28,6 +29,9 @@ Public Class CurrentMachine
    Private m_nThreadSleep As Integer = 150
 
    ' Dati su linea di produzione
+   Private m_bDemo As Boolean = False
+   Public nLastProjSentToViewDEMO As Integer = 0
+
    Private m_bProdLine As Boolean = False
    Private m_sVarProg1 As String = "E80021"
    Private m_nProg1 As Integer = 901
@@ -73,6 +77,12 @@ Public Class CurrentMachine
    Private m_bPolishingWheel As Boolean = False
    Private m_bWaterJet As Boolean = False
 
+   ' Flag che indica se gesire l'inversione del taglio nei tagli singoli
+   Private m_bEnableInvetrt As Boolean = True
+
+   ' Abilitazione DB WaterJet
+   Private m_bFromDBWaterJet As Boolean = False
+
    ' Flag per visualizzazione TcPos, Testa/uscita e Note utente
    Private m_nShowToolChanger As Integer = 0                 ' 0=no, 1=tutti utensili, 2=solo lame
    Private m_bShowHeadExit As Boolean = False
@@ -111,6 +121,7 @@ Public Class CurrentMachine
    Private m_sCurrDripSawing As String = String.Empty
    Private m_sCurrDripDrilling As String = String.Empty
    Private m_sCurrWaterJetting As String = String.Empty
+   Private m_sCurrWaterJettingQuality As String = String.Empty
 
    ' Spessore sottopezzo
    Private m_dAdditionalTable As Double = 0
@@ -154,6 +165,9 @@ Public Class CurrentMachine
    ' Lista dei materiali
    Private m_Materials As New ObservableCollection(Of Material)
 
+   ' Lista delle qualità di lavorazioni disponibili nel WaterJet
+   Private m_Qualities As New ObservableCollection(Of String)
+
    ' Massimo id della lista materiali nel file ini
    Private m_MaxIdMat As Integer = 0
 
@@ -225,6 +239,12 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property bDemo As Boolean
+      Get
+         Return m_bDemo
+      End Get
+   End Property
+
    Friend ReadOnly Property bProdLine As Boolean
       Get
          Return m_bProdLine
@@ -422,6 +442,12 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property bFromDBWaterJet As Boolean
+      Get
+         Return m_bFromDBWaterJet
+      End Get
+   End Property
+
    Friend ReadOnly Property ShowToolChanger As Integer
       Get
          Return m_nShowToolChanger
@@ -586,6 +612,18 @@ Public Class CurrentMachine
          If WritePrivateProfileString(S_MACH_MACH, K_CURRSAWING, value, sMachIniFile) Then
             m_sCurrSawing = value
             m_MainWindow.m_CurrentProjectPageUC.MachiningTxBx.Text = value
+            '' aggiorno il file ini della macchina con i valori correnti della lavorazione
+            'Dim sVal As String = String.Empty
+            'Dim dVal As Double = m_dFsevLength
+            'If GetUserNote("FsevLength", sVal, m_sCurrSawing, False) Then
+            '   StringToDouble(sVal, dVal)
+            '   SetFsevLength(dVal)
+            'End If
+            'dVal = m_dFsevPerc
+            'If GetUserNote("FsevPerc", sVal, m_sCurrSawing, False) Then
+            '   StringToDouble(sVal, m_dFsevPerc)
+            '   SetFsevPerc(dVal)
+            'End If
          End If
       End Set
    End Property
@@ -700,12 +738,29 @@ Public Class CurrentMachine
       End Set
    End Property
 
+   Friend Property sCurrWaterJettingQuality As String
+      Get
+         Return m_sCurrWaterJettingQuality
+      End Get
+      Set(value As String)
+         If WritePrivateProfileString(S_MACH_MACH, K_CURRWATERJETTINGQUALITY, value, sMachIniFile) Then
+            m_sCurrWaterJettingQuality = value
+         End If
+      End Set
+   End Property
+
    Friend ReadOnly Property WaterJettingActive As Double
       Get
          Return m_bWaterJetting AndAlso Not String.IsNullOrWhiteSpace(m_sCurrWaterJetting)
       End Get
    End Property
 
+   Friend ReadOnly Property bEnableInvert As Boolean
+      Get
+         Return m_bEnableInvetrt
+      End Get
+   End Property
+
    Friend Property dAdditionalTable As Double
       Get
          Select Case GetCurrentTable()
@@ -718,6 +773,7 @@ Public Class CurrentMachine
          End Select
       End Get
       Set(value As Double)
+         Dim dValue As Double = 0
          Select Case GetCurrentTable()
             Case 3
                If Math.Abs(value - m_dTab3AdditionalTable) > EPS_SMALL And
@@ -726,14 +782,24 @@ Public Class CurrentMachine
                   m_dTab3AdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB3_ADDITIONALTABLE, value)
+                  End If
                End If
-            Case 2
+                  Case 2
                If Math.Abs(value - m_dTab2AdditionalTable) > EPS_SMALL And
                WritePrivateProfileString(S_TABLE, K_TAB2_ADDITIONALTABLE, DoubleToString(value, 3), sMachIniFile) Then
                   ' Aggiorno il valore corrente
                   m_dTab2AdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_TAB2_ADDITIONALTABLE, value)
+                  End If
                End If
             Case Else
                If Math.Abs(value - m_dAdditionalTable) > EPS_SMALL And
@@ -742,6 +808,11 @@ Public Class CurrentMachine
                   m_dAdditionalTable = value
                   ' Aggiorno il progetto corrente
                   m_MainWindow.m_CurrentProjectPageUC.AdjustAdditionalTable()
+                  ' salvo il valore della sovratavola nel progetto
+                  EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, dValue)
+                  If Math.Abs(dValue - value) > EPS_SMALL Then
+                     EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), K_ADDITIONALTABLE, value)
+                  End If
                End If
          End Select
       End Set
@@ -811,9 +882,18 @@ Public Class CurrentMachine
       Set(value As Double)
          If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVLEN, DoubleToString(value, 3), sMachIniFile) Then
             m_dFsevLength = value
+            ' salvo il dato nelle UserNote della lavorazione
+            'MdbSetCurrMachiningUserNote("FsevLength", m_dFsevLength.ToString, sCurrSawing, false)
+            ' salvo il dato nelle UserNote dell'utensile
+            TdbSetCurrToolUserNote("FsevLength", m_dFsevLength.ToString, sCurrSaw)
          End If
       End Set
    End Property
+   Friend Sub SetFsevLength(value As Double)
+      If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVLEN, DoubleToString(value, 3), sMachIniFile) Then
+         m_dFsevLength = value
+      End If
+   End Sub
 
    Friend Property dFsevPerc As Double
       Get
@@ -822,9 +902,18 @@ Public Class CurrentMachine
       Set(value As Double)
          If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVPERC, DoubleToString(value, 3), sMachIniFile) Then
             m_dFsevPerc = value
+            '' salvo il dato nelle UserNote della lavorazione
+            'MdbSetCurrMachiningUserNote("FsevPerc", m_dFsevPerc.ToString, sCurrSawing)
+            ' salvo il dato nelle UserNote dell'utensile
+            TdbSetCurrToolUserNote("FsevPerc", m_dFsevPerc.ToString, sCurrSaw)
          End If
       End Set
    End Property
+   Friend Sub SetFsevPerc(value As Double)
+      If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVPERC, DoubleToString(value, 3), sMachIniFile) Then
+         m_dFsevPerc = value
+      End If
+   End Sub
 
    Friend ReadOnly Property ToolChangerNbr As Integer
       Get
@@ -894,6 +983,12 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property Qualities As ObservableCollection(Of String)
+      Get
+         Return m_Qualities
+      End Get
+   End Property
+
    Friend Sub AddMaterial(value As Material)
       For Each Material As Material In Materials
          If Material.nId = value.nId Then
@@ -975,7 +1070,11 @@ Public Class CurrentMachine
       End Get
       Set(value As Material)
          Dim CurrMatId As String = If(Not IsNothing(value), value.nId.ToString, "")
-         WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId, sMachIniFile)
+         If bWaterJet And bFromDBWaterJet Then
+            WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId & If(Not IsNothing(value), "." & value.SubId, ""), sMachIniFile)
+         Else
+            WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId, sMachIniFile)
+         End If
          m_CurrMat = value
       End Set
    End Property
@@ -1034,6 +1133,7 @@ Public Class CurrentMachine
          m_bProdLine = False
          EgtOutLog("Error - Production line requested but not key enabled")
       End If
+      m_bDemo = (GetPrivateProfileInt(S_PRODUCTIONLINE, "Demo", 0, sMachIniFile) <> 0)
       GetPrivateProfileString(S_PRODUCTIONLINE, K_VARPROG1, "", m_sVarProg1, sMachIniFile)
       m_nProg1 = GetPrivateProfileInt(S_PRODUCTIONLINE, K_NAMEPROG1, 0, m_MainWindow.GetMachIniFile())
       GetPrivateProfileString(S_PRODUCTIONLINE, K_VARPROG2, "", m_sVarProg2, sMachIniFile)
@@ -1072,6 +1172,8 @@ Public Class CurrentMachine
       ' waterjet
       m_bWaterJet = (GetPrivateProfileInt(S_TOOLS, K_WATERJET, 0, sMachIniFile) > 0) And
                     m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.ENABLE_WJ)
+      ' Leggo abilitazione DB WaterJet
+      m_bFromDBWaterJet = (GetPrivateProfileInt(S_MATERIALS, K_FROMDBWATERJET, 0, sMachIniFile) > 0)
       ' Leggo abilitazione visualizzazione TcPos, Head/exit e Note utente
       m_nShowToolChanger = GetPrivateProfileInt(S_TOOLS, K_SHOWTOOLCHANGER, 0, sMachIniFile)
       m_bShowHeadExit = (GetPrivateProfileInt(S_TOOLS, K_SHOWHEADEXIT, 0, sMachIniFile) > 0)
@@ -1107,6 +1209,8 @@ Public Class CurrentMachine
                         m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.ENABLE_WJ)
       ' possibilità di definire attacco speciale per materiali ceramici
       m_bSawingSpecialLeadIn = (GetPrivateProfileInt(S_MACHININGS, K_SAWINGSPECIALLEADIN, 0, sMachIniFile) > 0)
+      ' mantengo la direzione del taglio definita nel taglio diretto
+      m_bEnableInvetrt = (GetPrivateProfileInt(S_DIRECTCUTS, K_ENABLEINVERT, 1, sMachIniFile) <> 0)
 
       ' Leggo utensili correnti
       ' lama
@@ -1147,6 +1251,8 @@ Public Class CurrentMachine
       GetPrivateProfileString(S_MACH_MACH, K_CURRDRIPDRILLING, Nothing, m_sCurrDripDrilling, sMachIniFile)
       ' waterjetting
       GetPrivateProfileString(S_MACH_MACH, K_CURRWATERJETTING, Nothing, m_sCurrWaterJetting, sMachIniFile)
+      ' waterjettingquality
+      GetPrivateProfileString(S_MACH_MACH, K_CURRWATERJETTINGQUALITY, Nothing, m_sCurrWaterJettingQuality, sMachIniFile)
 
       ' Leggo numero di portautensili
       m_ToolChangerNbr = GetPrivateProfileInt(S_TOOLCHANGER, K_NUMBER, 0, sMachIniFile)
@@ -1200,6 +1306,7 @@ Public Class CurrentMachine
 
       ' Leggo dati per feed ridotta all'inizio/fine dei tagli
       m_bFsevEnable = (GetPrivateProfileInt(S_NEST, K_MACH_CUTFSEVENABLE, 0, sMachIniFile) <> 0)
+      ' sposto la lettura nel DB delle lavorazioni della lama corrente!
       m_dFsevLength = GetPrivateProfileDouble(S_NEST, K_MACH_CUTFSEVLEN, 0, sMachIniFile)
       m_dFsevPerc = GetPrivateProfileDouble(S_NEST, K_MACH_CUTFSEVPERC, 0, sMachIniFile)
 
@@ -1208,27 +1315,281 @@ Public Class CurrentMachine
       ' Leggo la lista dei materiali
       Dim Material As Material = Nothing
       Dim nIndex As Integer = 1
-      While (GetPrivateProfileMaterial(S_MATERIALS, K_MATERIAL & nIndex, Material, sMachIniFile))
-         m_Materials.Add(Material)
-         nIndex += 1
-      End While
+
+      If m_bWaterJet And m_bFromDBWaterJet Then
+         LoadWJMaterial(True)
+      Else
+         While (GetPrivateProfileMaterial(S_MATERIALS, K_MATERIAL & nIndex, Material, sMachIniFile))
+            m_Materials.Add(Material)
+            nIndex += 1
+         End While
+      End If
+
       ' Salvo massimo indice a cui sono arrivato per usarlo quando devo aggiungere nuovi elementi alla lista
       m_MaxIdMat = nIndex - 1
 
       ' Leggo materiale correntemente attivo
-      Dim CurrMatId As Integer = GetPrivateProfileInt(S_MATERIALS, K_CURRMATERIAL, 0, sMachIniFile)
-      For Each Material In Materials
-         If Material.nId = CurrMatId Then
-            m_CurrMat = Material
-            Exit For
+      Dim sCurrMatId As String = String.Empty
+      EgtUILib.GetPrivateProfileString(S_MATERIALS, K_CURRMATERIAL, "0", sCurrMatId, sMachIniFile)
+      If bWaterJet And bFromDBWaterJet Then
+         Dim sCurrMatIds As String()
+         sCurrMatIds = sCurrMatId.Split("."c)
+         If sCurrMatIds.Length > 1 Then
+            Dim nCurrMatId As Integer
+            Dim nCurrSubMatId As Integer
+            If Not Integer.TryParse(sCurrMatIds(0), nCurrMatId) Then nCurrMatId = 0
+            If Not Integer.TryParse(sCurrMatIds(1), nCurrSubMatId) Then nCurrSubMatId = 0
+            For Each Material In Materials
+               If Material.nId = nCurrMatId AndAlso Material.SubId = nCurrSubMatId Then
+                  m_CurrMat = Material
+                  Exit For
+               End If
+            Next
          End If
-      Next
+      Else
+         Dim nCurrMatId As Integer
+         If Not Integer.TryParse(sCurrMatId, nCurrMatId) Then nCurrMatId = 0
+         For Each Material In Materials
+            If Material.nId = nCurrMatId Then
+               m_CurrMat = Material
+               Exit For
+            End If
+         Next
+      End If
       ' leggo se la macchina ha il tastatore dello spessore tavola
       m_HasRawProbe = (GetPrivateProfileInt(S_MACH_PROBING, K_ENABLERAWPROBE, 1, sMachIniFile) <> 0)
       ' leggo se la macchina ha il lettore di codice a barre della lastra
       m_nEnableBarCodeReader = GetPrivateProfileInt(S_MACH_BARCODEREADER, K_ENABLEBCR, 0, sMachIniFile)
    End Sub
 
+   ' Per il controllo FANUC al momento dell'inizializzazione del CN devono essere lette alcune variabili
+   Public Sub InitFANUC(CN_Generic As CN_generico)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nResetSendDelay = GetPrivateProfileInt(S_NCFANUC, K_RESETSENDDELAY, 1000, sMachIniFile)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nThreadSleep = GetPrivateProfileInt(S_NCFANUC, K_THREADSLEEP, 150, sMachIniFile)
+      ' Leggo i dati strettamente correlati alla comunicazione NC-PC
+      Dim CN As CN_generico = CN_Generic
+      ' Leggo l'indirizzo in cui scrivere lo stato macchina
+      Dim dAddNcMode As String = CN.s_addr_set_nc_mode
+      GetPrivateProfileString(S_NCFANUC, K_SETNCMODE, CN.s_addr_set_nc_mode, CN.s_addr_set_nc_mode, sMachIniFile)
+      ' Leggo primo indirizzo libero delle variabili di tipo intero
+      CN.n_Base_addr_int_vars = GetPrivateProfileInt(S_NCFANUC, K_BASEADDRINT, CN.n_Base_addr_int_vars, sMachIniFile)
+      ' Leggo primo indirizzo libero delle variabili di tipo bit
+      CN.n_Base_addr_byte_for_bits_vars = GetPrivateProfileInt(S_NCFANUC, K_BASEADDRBIT, CN.n_Base_addr_byte_for_bits_vars, sMachIniFile)
+      ' Leggo numero di variabili di tipo intero
+      CN.n_num_var_int_to_read = CShort(GetPrivateProfileInt(S_NCFANUC, K_NUMVARINT, CInt(CN.n_num_var_int_to_read), sMachIniFile))
+      ' Leggo numero di varibili di tipo bit
+      CN.n_num_var_byte_for_bits_to_read = CShort(GetPrivateProfileInt(S_NCFANUC, K_NUMVARBIT, CInt(CN.n_num_var_byte_for_bits_to_read), sMachIniFile))
+      ' Leggo variabile abilitata alla gestione di FeedHold
+      GetPrivateProfileString(S_NCFANUC, K_SETNCMODE, CN.s_addr_feedhold, CN.s_addr_feedhold, sMachIniFile)
+   End Sub
+
+   Public Sub LoadWJMaterial(Optional bIsStart As Boolean = False)
+      Dim TempCurrMat As Material = CurrMat
+      ' Svuoto l'attuale lista di materiali
+      m_Materials.Clear()
+      ' Leggo valori da file Data e li carico nelle proprietà
+      Dim sFilePath As String = sMachDir & "\" &  MACHININGS_DIR & "\" & WATERJETDB_FILE
+      Dim Local_MaterialList = New ObservableCollection(Of EgtWPFLib5.WjMaterial)
+      Local_MaterialList = WaterjetDbWindowVM_OmagCUT.LoadWjMaterials(sFilePath)
+      ' definisco la lista delle qualità (solo se è vuota)
+      If m_Qualities.Count < 1 Then
+         m_Qualities.Add("Q1")
+         m_Qualities.Add("Q2")
+         m_Qualities.Add("Q3")
+         m_Qualities.Add("Q4")
+         m_Qualities.Add("Q5")
+         m_Qualities.Add("QExtra")
+      End If
+      ' inserisco il materiale generico di default -- IN SOSPESO
+      'm_Materials.Add(New Material(0, "***", 0))
+      ' costruiscoi la lista 
+      Dim i As Integer = 0
+      Dim sName As String = String.Empty
+      For i = 0 To Local_MaterialList.Count - 1
+         sName = Local_MaterialList(i).Name
+         Dim j As Integer = 0
+         For j = 0 To Local_MaterialList(i).SubMaterialList.Count - 1
+            m_Materials.Add(New Material(i + 1, sName & "." & Local_MaterialList(i).SubMaterialList(j).Name, j + 1))
+         Next
+      Next
+      If Not bIsStart Then CurrMat = TempCurrMat
+   End Sub
+
+   Public Function GetMaxThicknessCurrMaterial(sCurMat As String) As Double
+      Dim bFound As Boolean = False
+      Dim dMaxThick As Double = 0
+      ' Leggo valori da file Data e li carico nelle proprietà
+      Dim sFilePath As String = sMachDir & "\" & MACHININGS_DIR & "\" & WATERJETDB_FILE
+      Dim Local_MaterialList = New ObservableCollection(Of EgtWPFLib5.WjMaterial)
+      Local_MaterialList = WaterjetDbWindowVM_OmagCUT.LoadWjMaterials(sFilePath)
+      Dim sItems() As String = sCurMat.Split("."c)
+      If sItems.Count > 1 Then
+         Dim sMat As String = sItems(0)
+         Dim sSubMat As String = sItems(1)
+         For Each ItemMat As EgtWPFLib5.WjMaterial In Local_MaterialList
+            If ItemMat.Name = sMat Then
+               For Each ItemSubMat As EgtWPFLib5.WjSubMaterial In ItemMat.SubMaterialList
+                  If ItemSubMat.Name = sSubMat Then
+                     For Each ItemParam As EgtWPFLib5.WjParam In ItemSubMat.ParamList
+                        Dim dParamThick As Double
+                        StringToDouble(ItemParam.Thickness, dParamThick)
+                        If dParamThick > dMaxThick Then
+                           dMaxThick = dParamThick
+                        End If
+                     Next
+                     bFound = True
+                     Exit For
+                  End If
+                  If bFound Then Exit For
+               Next
+            End If
+            If bFound Then Exit For
+         Next
+      End If
+      ' il valore resituito è già nell'unità corrente del programma -> converto il dato in mm
+      Dim dValmm As Double = 0
+      StringToLen(DoubleToString(dMaxThick, 3), dValmm)
+      Return dValmm
+   End Function
+
+#Region "USERNOTE"
+
+   ' recupero le note UserNote associate alla LAVORAZIONE Machining
+   Friend Function MdbGetCurrMachiningUserNote(Machining As String) As String
+      Dim UserNotes As String = String.Empty
+      ' lavorazione corrente
+      Dim CurrMach As String = String.Empty
+      EgtMdbGetCurrMachiningParam(MCH_MP.NAME, CurrMach)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Machining) AndAlso EgtMdbSetCurrMachining(Machining) Then
+         ' leggo nel db corrente della lavorazione questa info
+         EgtMdbGetCurrMachiningParam(MCH_MP.USERNOTES, UserNotes)
+         ' reimposto lavorazione corrente
+         EgtMdbSetCurrMachining(CurrMach)
+      End If
+      Return UserNotes
+   End Function
+
+   ' recupero le note UserNote associate all'UTENSILE Tool
+   Friend Function TdbGetCurrToolUserNote(Tool As String) As String
+      Dim UserNotes As String = String.Empty
+      ' lavorazione corrente
+      Dim CurrTool As String = String.Empty
+      EgtTdbGetCurrToolParam(MCH_TP.NAME, CurrTool)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Tool) AndAlso EgtTdbSetCurrTool(Tool) Then
+         ' leggo nel db corrente della lavorazione questa info
+         EgtTdbGetCurrToolParam(MCH_TP.USERNOTES, UserNotes)
+         ' reimposto lavorazione corrente
+         EgtTdbSetCurrTool(CurrTool)
+      End If
+      Return UserNotes
+   End Function
+
+   ' imposta il nuovo valore in UserNote della LAVORAZIONE Machining
+   Friend Sub MdbSetCurrMachiningUserNote(sKeyUserNote As String, sValUserNote As String, Machining As String)
+      ' lavorazione corrente
+      Dim CurrMach As String = String.Empty
+      EgtMdbGetCurrMachiningParam(MCH_MP.NAME, CurrMach)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Machining) AndAlso EgtMdbSetCurrMachining(Machining) Then
+         Dim UserNotes As String = String.Empty
+         ' salvo nel db corrente della lavorazione questa info → devo gestire l'inserimento: sovrascrivo NON ESEGUE un APPEND delle info
+         EgtMdbSetCurrMachiningParam(MCH_MP.USERNOTES, AssembUserNote(sKeyUserNote, sValUserNote, Machining))
+         EgtMdbSaveCurrMachining()
+         EgtMdbSave()
+         ' reimposto lavorazione corrente
+         EgtMdbSetCurrMachining(CurrMach)
+      End If
+   End Sub
+
+   ' imposta il nuovo valore in UserNote dell'UTENSILE Tool
+   Friend Sub TdbSetCurrToolUserNote(sKeyUserNote As String, sValUserNote As String, Tool As String)
+      ' lavorazione corrente
+      Dim CurrTool As String = String.Empty
+      EgtTdbGetCurrToolParam(MCH_TP.NAME, CurrTool)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Tool) AndAlso EgtTdbSetCurrTool(Tool) Then
+         Dim UserNotes As String = String.Empty
+         ' salvo nel db corrente della lavorazione questa info → devo gestire l'inserimento: sovrascrivo NON ESEGUE un APPEND delle info
+         EgtTdbSetCurrToolParam(MCH_TP.USERNOTES, AssembUserNote(sKeyUserNote, sValUserNote, Tool))
+         EgtTdbSaveCurrTool()
+         EgtTdbSave()
+         ' reimposto lavorazione corrente
+         EgtTdbSetCurrTool(Tool)
+      End If
+   End Sub
+
+   ' separa la le note UserNote della LAVORAZIONE
+   Private Function SplitUserNoteMachinig(Machining As String) As String()
+      Dim sUserNotes As String = MdbGetCurrMachiningUserNote(Machining)
+      If String.IsNullOrEmpty(sUserNotes) Then Return Nothing
+      Dim sItems As String() = sUserNotes.Split(";"c)
+      Return sItems
+   End Function
+
+   ' separa la le note UserNote della LAVORAZIONE
+   Private Function SplitUserNoteTool(Tool As String) As String()
+      Dim sUserNotes As String = TdbGetCurrToolUserNote(Tool)
+      If String.IsNullOrEmpty(sUserNotes) Then Return Nothing
+      Dim sItems As String() = sUserNotes.Split(";"c)
+      Return sItems
+   End Function
+
+   ' recupera il valore della associato alla chiave per la lavorazione oppure utensile (bIsToolNote)
+   Friend Function GetUserNote(sKeyUserNote As String, ByRef sValUserNote As String, sName As String, Optional bIsToolNote As Boolean = True) As Boolean
+      Dim sUserNotesList As String() = Nothing
+      If bIsToolNote Then
+         sUserNotesList = SplitUserNoteTool(sName)
+      Else
+         sUserNotesList = SplitUserNoteMachinig(sName)
+      End If
+      If IsNothing(sUserNotesList) Then Return False
+      For Index As Integer = 0 To sUserNotesList.Count - 1
+         Dim sNote As String() = sUserNotesList(Index).Split("="c)
+         If sNote.Count = 2 AndAlso sNote(0).Trim = sKeyUserNote Then
+            sValUserNote = sNote(1).Trim
+         End If
+      Next
+      Return True
+   End Function
+
+   ' ricostruisce la stringa UserNote da salvare
+   Friend Function AssembUserNote(sKeyUserNote As String, sValUserNote As String, sName As String, Optional bIsToolNote As Boolean = True) As String
+      Dim sUserNotes As String = String.Empty
+      Dim sUserNotesList As String() = Nothing
+      If bIsToolNote Then
+         sUserNotesList = SplitUserNoteTool(sName)
+      Else
+         sUserNotesList = SplitUserNoteMachinig(sName)
+      End If
+      Dim bExists As Boolean = False
+      If Not IsNothing(sUserNotesList) Then
+         For Index As Integer = 0 To sUserNotesList.Count - 1
+            Dim sNote As String() = sUserNotesList(Index).Split("="c)
+            If sNote.Count = 2 AndAlso sNote(0).Trim = sKeyUserNote Then
+               sUserNotesList(Index) = sKeyUserNote & "=" & sValUserNote
+               bExists = True
+               Exit For
+            End If
+         Next
+         ' riassemblo la stringa
+         For Each Item As String In sUserNotesList
+            If Not String.IsNullOrWhiteSpace(Item) Then
+               sUserNotes &= Item & ";"
+            End If
+         Next
+      End If
+      If Not bExists Then
+         sUserNotes &= sKeyUserNote & "=" & sValUserNote & ";"
+      End If
+      Return sUserNotes
+   End Function
+
+#End Region    ' USERNOTE
+
    Friend Function IsVacuumMovePossible() As Boolean
       ' Recupero diametro lama corrente
       EgtTdbSetCurrTool(sCurrSaw)
@@ -1323,6 +1684,7 @@ Friend Class Material
 
    Private m_nId As Integer
    Private m_sName As String
+   Private m_SubId As Integer = 0
 
    Public ReadOnly Property nId As Integer
       Get
@@ -1339,6 +1701,15 @@ Friend Class Material
       End Set
    End Property
 
+   Public Property SubId As Integer
+      Get
+         Return m_SubId
+      End Get
+      Set(value As Integer)
+         m_SubId = value
+      End Set
+   End Property
+
    Sub New(sName As String, MaterialList As ObservableCollection(Of Material))
       Dim nMaxId As Integer = 0
       For Each Material As Material In MaterialList
@@ -1355,4 +1726,11 @@ Friend Class Material
       m_sName = sName
    End Sub
 
+   Sub New(nId As Integer, sName As String, nSubId As Integer)
+      m_nId = nId
+      m_sName = sName
+      m_SubId = nSubId
+   End Sub
+
 End Class
+

Machine/ImportExportMachiningWindowWD.xaml

@@ -0,0 +1,139 @@
+<Window  x:Class="ImportExportMachiningWindowWD"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+   FontFamily="{DynamicResource OmagCut_Font}"
+   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+   Title="SaveNameWD" Height="350" Width="426.5" ShowInTaskbar="False">
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+
+        <Grid>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="7*"/>
+                <RowDefinition Height="2*"/>
+            </Grid.RowDefinitions>
+            
+            <ScrollViewer Grid.Row="0"  Margin="20">
+                <TreeView ItemsSource="{Binding FamilyList}" Background="{DynamicResource OmagCut_TreeViewBackGroundColor}">
+                    <TreeView.Resources>
+                        <HierarchicalDataTemplate DataType="{x:Type EgtWPFLib5:ImpExpMachiningFamily}" ItemsSource="{Binding MachiningList}">
+            
+                            <Grid Height="20">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="Auto"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+            
+                                <Image Grid.Column="0" Source="{Binding PictureString}" Height="20" Width="20" Margin="0,0,5,0" />
+                                <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="0,-2,5,0" VerticalAlignment="Center" />
+            
+                            </Grid>
+            
+                            <!-- multibinding quando sono attivi.-->
+                            <HierarchicalDataTemplate.ItemContainerStyle>
+                                <Style TargetType="{x:Type TreeViewItem}" >
+                                    <Setter Property="Foreground" Value="{DynamicResource OmagCut_TreeViewTextColor}" />
+                                    <Setter Property="IsSelected" Value="{Binding IsSelected}" />
+                                    <Setter Property="IsExpanded" Value="{Binding IsExpanded}" />
+                                    <Setter Property="Template">
+                                        <Setter.Value>
+                                            <ControlTemplate TargetType="{x:Type TreeViewItem}">
+                                                <Grid>
+                                                    <Grid.ColumnDefinitions>
+                                                        <ColumnDefinition MinWidth="19" Width="Auto"/>
+                                                        <ColumnDefinition Width="Auto"/>
+                                                        <ColumnDefinition Width="*"/>
+                                                    </Grid.ColumnDefinitions>
+                                                    <Grid.RowDefinitions>
+                                                        <RowDefinition Height="Auto"/>
+                                                        <RowDefinition/>
+                                                    </Grid.RowDefinitions>
+                                                    <ToggleButton x:Name="Expander" ClickMode="Press" IsChecked="{Binding IsExpanded, RelativeSource={RelativeSource TemplatedParent}}" Style="{StaticResource ExpandCollapseToggleStyle}"/>
+                                                    <Border x:Name="Bd" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Background="{TemplateBinding Background}" Grid.Column="1" Padding="{TemplateBinding Padding}" SnapsToDevicePixels="true">
+                                                        <ContentPresenter x:Name="PART_Header" ContentSource="Header" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}"/>
+                                                    </Border>
+                                                    <ItemsPresenter x:Name="ItemsHost" Grid.ColumnSpan="2" Grid.Column="1" Grid.Row="1"/>
+                                                    <Rectangle Grid.Row="0" Grid.Column="0" Grid.ColumnSpan="4" HorizontalAlignment="Stretch" VerticalAlignment="Top" Fill="{DynamicResource OmagCut_TreeViewDelimiterColor}" Height="1" />
+                                                </Grid>
+                                                <ControlTemplate.Triggers>
+                                                    <Trigger Property="IsExpanded" Value="false">
+                                                        <Setter Property="Visibility" TargetName="ItemsHost" Value="Collapsed"/>
+                                                    </Trigger>
+                                                    <Trigger Property="HasItems" Value="false">
+                                                        <Setter Property="Visibility" TargetName="Expander" Value="Hidden"/>
+                                                    </Trigger>
+                                                    <Trigger Property="IsSelected" Value="true">
+                                                        <Setter Property="Background" TargetName="Bd" Value="{DynamicResource OmagCut_TreeViewSelectedItemBackground}" />
+                                                        <Setter Property="BorderBrush" TargetName="Bd" Value="{DynamicResource OmagCut_TreeViewSelectedItemBorder}"/>
+                                                        <Setter Property="BorderThickness" TargetName="Bd" Value="1"/>
+                                                        <!--<Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.HighlightTextBrushKey}}"/>-->
+                                                    </Trigger>
+                                                    <!--<MultiTrigger>
+                                           <MultiTrigger.Conditions>
+                                              <Condition Property="IsSelected" Value="true"/>
+                                              <Condition Property="IsSelectionActive" Value="false"/>
+                                           </MultiTrigger.Conditions>
+                                           <Setter Property="Background" TargetName="Bd" Value="{DynamicResource {x:Static SystemColors.ControlBrushKey}}"/>
+                                           <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
+                                        </MultiTrigger>-->
+                                                    <Trigger Property="IsEnabled" Value="false">
+                                                        <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.GrayTextBrushKey}}"/>
+                                                    </Trigger>
+                                                </ControlTemplate.Triggers>
+                                            </ControlTemplate>
+                                        </Setter.Value>
+                                    </Setter>
+                                </Style>
+                            </HierarchicalDataTemplate.ItemContainerStyle>
+                        </HierarchicalDataTemplate>
+            
+                        <DataTemplate DataType="{x:Type EgtWPFLib5:ImpExpMachiningItem}">
+                            <Grid Height="20">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="Auto"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+            
+                                <!--<Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Margin="0,8,6,4" />-->
+                                <CheckBox Name="ActiveTxBx" Grid.Column="0" Height="15" Width="15" 
+                                          Margin="-15,0,5,0" VerticalContentAlignment="Center"
+                                          IsChecked="{Binding Active}"
+                                          Visibility="{Binding Path=DataContext.Active_Visibility,
+                                                       RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtCustomWindow}}}"/>
+                                <TextBlock Grid.Column="1" Text="{Binding Name}" 
+                                           Style="{StaticResource OmagCut_ListBoxTextBlock}"   />
+            
+                            </Grid>
+                        </DataTemplate>
+            
+                    </TreeView.Resources>
+                </TreeView>
+            </ScrollViewer>
+            
+            <Grid Grid.Column="1" Grid.Row="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+            
+                <Button Name="OkBtn" Grid.Row="0"  Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                            Margin="5,-10,5,15"
+                            Command="{Binding OkCommand}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                            Margin="5,-10,5,15"
+                            IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
+    </Grid>
+
+    </Border>
+
+</Window>

Machine/ImportExportMachiningWindowWD.xaml.vb

@@ -0,0 +1,33 @@
+Imports EgtWPFLib5
+Public Class ImportExportMachiningWindowWD
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private WithEvents m_ImportExportMachiningWindowVM As ImportExportMachiningWindowVM
+
+   Private m_OkResult As Boolean = False
+   Public ReadOnly Property OkResult As Boolean
+      Get
+         Return m_OkResult
+      End Get
+   End Property
+
+   Sub New(Owner As Window, ImportExportToolWindowVM As ImportExportMachiningWindowVM)
+      Me.Owner = Owner
+      ' This call is required by the designer.
+      InitializeComponent()
+      Me.DataContext = ImportExportToolWindowVM
+      ' Assegno al riferimento locale al VM il VM preso dal DataContext
+      m_ImportExportMachiningWindowVM = ImportExportToolWindowVM
+   End Sub
+   Private Sub OkCloseDialogWD() Handles OkBtn.Click
+      m_OkResult = True
+      Me.Close()
+   End Sub
+
+   Private Sub CancelCloseDialogWD() Handles ExitBtn.Click
+      m_OkResult = False
+      Me.Close()
+   End Sub
+
+End Class

Machine/ImportExportToolWD.xaml

@@ -0,0 +1,138 @@
+<Window x:Class="ImportExportToolWD"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+   FontFamily="{DynamicResource OmagCut_Font}"
+   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+   Title="SaveNameWD" Height="350" Width="426.5" ShowInTaskbar="False">
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+
+        <Grid>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="7*"/>
+                <RowDefinition Height="2*"/>
+            </Grid.RowDefinitions>
+
+            <ScrollViewer Grid.Row="0" Margin="20">
+                <TreeView ItemsSource="{Binding FamilyList}" Background="{DynamicResource OmagCut_TreeViewBackGroundColor}">
+                    <TreeView.Resources>
+                        <HierarchicalDataTemplate DataType="{x:Type EgtWPFLib5:ImpExpToolFamily}" ItemsSource="{Binding ToolList}">
+
+                            <Grid Height="20">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="Auto"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+
+                                <Image Grid.Column="0" Source="{Binding PictureString}" Height="20" Width="20" Margin="0,0,5,0" />
+                                <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="0,-2,5,0" VerticalAlignment="Center" />
+
+                            </Grid>
+                            <!-- multibinding quando sono attivi.-->
+                            <HierarchicalDataTemplate.ItemContainerStyle>
+                                <Style TargetType="{x:Type TreeViewItem}" >
+                                    <Setter Property="Foreground" Value="{DynamicResource OmagCut_TreeViewTextColor}" />
+                                    <Setter Property="IsSelected" Value="{Binding IsSelected}" />
+                                    <Setter Property="IsExpanded" Value="{Binding IsExpanded}" />
+                                    <Setter Property="Template">
+                                        <Setter.Value>
+                                            <ControlTemplate TargetType="{x:Type TreeViewItem}">
+                                                <Grid>
+                                                    <Grid.ColumnDefinitions>
+                                                        <ColumnDefinition MinWidth="19" Width="Auto"/>
+                                                        <ColumnDefinition Width="Auto"/>
+                                                        <ColumnDefinition Width="*"/>
+                                                    </Grid.ColumnDefinitions>
+                                                    <Grid.RowDefinitions>
+                                                        <RowDefinition Height="Auto"/>
+                                                        <RowDefinition/>
+                                                    </Grid.RowDefinitions>
+                                                    <ToggleButton x:Name="Expander" ClickMode="Press" IsChecked="{Binding IsExpanded, RelativeSource={RelativeSource TemplatedParent}}" Style="{StaticResource ExpandCollapseToggleStyle}"/>
+                                                    <Border x:Name="Bd" BorderBrush="{TemplateBinding BorderBrush}" BorderThickness="{TemplateBinding BorderThickness}" Background="{TemplateBinding Background}" Grid.Column="1" Padding="{TemplateBinding Padding}" SnapsToDevicePixels="true">
+                                                        <ContentPresenter x:Name="PART_Header" ContentSource="Header" HorizontalAlignment="{TemplateBinding HorizontalContentAlignment}" SnapsToDevicePixels="{TemplateBinding SnapsToDevicePixels}"/>
+                                                    </Border>
+                                                    <ItemsPresenter x:Name="ItemsHost" Grid.ColumnSpan="2" Grid.Column="1" Grid.Row="1"/>
+                                                    <Rectangle Grid.Row="0" Grid.Column="0" Grid.ColumnSpan="4" HorizontalAlignment="Stretch" VerticalAlignment="Top" Fill="{DynamicResource OmagCut_TreeViewDelimiterColor}" Height="1" />
+                                                </Grid>
+                                                <ControlTemplate.Triggers>
+                                                    <Trigger Property="IsExpanded" Value="false">
+                                                        <Setter Property="Visibility" TargetName="ItemsHost" Value="Collapsed"/>
+                                                    </Trigger>
+                                                    <Trigger Property="HasItems" Value="false">
+                                                        <Setter Property="Visibility" TargetName="Expander" Value="Hidden"/>
+                                                    </Trigger>
+                                                    <Trigger Property="IsSelected" Value="true">
+                                                        <Setter Property="Background" TargetName="Bd" Value="{DynamicResource OmagCut_TreeViewSelectedItemBackground}" />
+                                                        <Setter Property="BorderBrush" TargetName="Bd" Value="{DynamicResource OmagCut_TreeViewSelectedItemBorder}"/>
+                                                        <Setter Property="BorderThickness" TargetName="Bd" Value="1"/>
+                                                        <!--<Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.HighlightTextBrushKey}}"/>-->
+                                                    </Trigger>
+                                                    <!--<MultiTrigger>
+                                       <MultiTrigger.Conditions>
+                                          <Condition Property="IsSelected" Value="true"/>
+                                          <Condition Property="IsSelectionActive" Value="false"/>
+                                       </MultiTrigger.Conditions>
+                                       <Setter Property="Background" TargetName="Bd" Value="{DynamicResource {x:Static SystemColors.ControlBrushKey}}"/>
+                                       <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.ControlTextBrushKey}}"/>
+                                    </MultiTrigger>-->
+                                                    <Trigger Property="IsEnabled" Value="false">
+                                                        <Setter Property="Foreground" Value="{DynamicResource {x:Static SystemColors.GrayTextBrushKey}}"/>
+                                                    </Trigger>
+                                                </ControlTemplate.Triggers>
+                                            </ControlTemplate>
+                                        </Setter.Value>
+                                    </Setter>
+                                </Style>
+                            </HierarchicalDataTemplate.ItemContainerStyle>
+                        </HierarchicalDataTemplate>
+
+                        <DataTemplate DataType="{x:Type EgtWPFLib5:ImpExpToolItem}">
+                            <Grid Height="20">
+                                <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="Auto"/>
+                                    <ColumnDefinition Width="1*"/>
+                                </Grid.ColumnDefinitions>
+                                <!--<Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Margin="0,8,6,4" />-->
+                                <CheckBox Name="ActiveTxBx" Grid.Column="0" Height="15" Width="15" 
+                                          Margin="-15,0,5,0" VerticalContentAlignment="Center"
+                                          IsChecked="{Binding Active}"
+                                          Visibility="{Binding Path=DataContext.Active_Visibility,
+                                          RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtCustomWindow}}}"/>
+                                <TextBlock Grid.Column="1" Text="{Binding Name}" 
+                                           Style="{StaticResource OmagCut_ListBoxTextBlock}"  />
+
+                            </Grid>
+                        </DataTemplate>
+
+                    </TreeView.Resources>
+                </TreeView>
+            </ScrollViewer>
+
+            <Grid Grid.Column="1" Grid.Row="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Row="0"  Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                        Margin="5,-10,5,15"
+                        Command="{Binding OkCommand}">
+                <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                        Margin="5,-10,5,15"
+                        IsCancel="True">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+            </Grid>
+                
+        </Grid>
+
+    </Border>
+
+</Window>

Machine/ImportExportToolWD.xaml.vb

@@ -0,0 +1,38 @@
+Imports EgtWPFLib5
+Public Class ImportExportToolWD
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private WithEvents m_ImportExportToolWindowVM As ImportExportToolWindowVM
+
+   Private m_OkResult As Boolean = False
+   Public ReadOnly Property OkResult As Boolean
+      Get
+         Return m_OkResult
+      End Get
+   End Property
+
+   Sub New(Owner As Window, ImportExportToolWindowVM As ImportExportToolWindowVM)
+      Me.Owner = Owner
+      ' This call is required by the designer.
+      InitializeComponent()
+      Me.DataContext = ImportExportToolWindowVM
+      ' Assegno al riferimento locale al VM il VM preso dal DataContext
+      m_ImportExportToolWindowVM = ImportExportToolWindowVM
+   End Sub
+
+   'Private Sub CloseWindow(bDialogResult As Boolean) Handles m_ImportExportToolWindowVM.m_CloseWindow
+   '   Me.DialogResult = bDialogResult
+   'End Sub
+
+   Private Sub OkCloseDialogWD() Handles OkBtn.Click
+      m_OkResult = True
+      Me.Close()
+   End Sub
+
+   Private Sub CancelCloseDialogWD() Handles ExitBtn.Click
+      m_OkResult = False
+      Me.Close()
+   End Sub
+
+End Class

Machine/MachineCNPageUC.xaml

@@ -34,16 +34,21 @@
                   <ColumnDefinition Width="1.5*"/>
                </Grid.ColumnDefinitions>
 
-               <Button Name="AutoBtn" Grid.Column="0"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="ManualBtn" Grid.Column="1"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="MDIBtn" Grid.Column="2"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="SingleBtn" Grid.Column="3"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="HomeBtn" Grid.Column="4"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <ToggleButton Name="AutoBtn" Grid.Column="0"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
+               <ToggleButton Name="ManualBtn" Grid.Column="1"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
+               <ToggleButton Name="MDIBtn" Grid.Column="2"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
+               <ToggleButton Name="SingleBtn" Grid.Column="3"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
+               <ToggleButton Name="HomeBtn" Grid.Column="4"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
 
             </Grid>
 
@@ -57,7 +62,7 @@
                   <ColumnDefinition Width="2*"/>
                </Grid.ColumnDefinitions>
 
-                    <Button Name="StartBtn" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="StartBtn" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
                <Button Name="StopBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
                <Button Name="ResetBtn" Grid.Column="2"

Machine/MachineCNPageUC.xaml.vb

@@ -8,6 +8,8 @@ Public Class MachineCNPageUC
    Private m_bFirst As Boolean = True
    Private m_ButtonPower As New List(Of MachineButton)
 
+   Private m_nCurrMode As Integer = 0
+
    Private Sub TestingPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       StartBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 1)
       StopBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 2)
@@ -51,6 +53,9 @@ Public Class MachineCNPageUC
          PartProgTransferGpBx.Visibility = Windows.Visibility.Hidden
       End If
 
+      ' gestione visuliazzazione ToggleButton Auto/Sinlge/Mdi/Manula/Home
+      SetCncMode()
+
       '------ NUOVI BOTTONI ----------
       ' Lettura configurazione bottoni (per impostare l'uso del Joystick) da Ini di macchina
       m_ButtonPower.Clear()
@@ -98,6 +103,53 @@ Public Class MachineCNPageUC
 
    End Sub
 
+   Private Sub SetCncMode()
+      Dim Mode As Integer = m_nCurrMode
+      Select Case Mode
+         Case 0
+            ' Auoto
+            MDIConfirmBtn.IsEnabled = False
+            AutoBtn.IsChecked = True
+            SingleBtn.IsChecked = False
+            MDIBtn.IsChecked = False
+            ManualBtn.IsChecked = False
+            HomeBtn.IsChecked = False
+         Case 1
+            ' Single
+            MDIConfirmBtn.IsEnabled = False
+            AutoBtn.IsChecked = False
+            SingleBtn.IsChecked = True
+            MDIBtn.IsChecked = False
+            ManualBtn.IsChecked = False
+            HomeBtn.IsChecked = False
+         Case 2
+            ' Mdi
+            MDIConfirmBtn.IsEnabled = True
+            AutoBtn.IsChecked = False
+            SingleBtn.IsChecked = False
+            MDIBtn.IsChecked = True
+            ManualBtn.IsChecked = False
+            HomeBtn.IsChecked = False
+         Case 7
+            ' Manual
+            MDIConfirmBtn.IsEnabled = False
+            AutoBtn.IsChecked = False
+            SingleBtn.IsChecked = False
+            MDIBtn.IsChecked = False
+            ManualBtn.IsChecked = True
+            HomeBtn.IsChecked = False
+         Case 8
+            ' Home
+            MDIConfirmBtn.IsEnabled = False
+            AutoBtn.IsChecked = False
+            SingleBtn.IsChecked = False
+            MDIBtn.IsChecked = False
+            ManualBtn.IsChecked = False
+            HomeBtn.IsChecked = True
+      End Select
+
+   End Sub
+
    Private Sub StartBtn_Click(sender As Object, e As RoutedEventArgs) Handles StartBtn.Click
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          Dim sDBVarPath As String = ""
@@ -278,4 +330,9 @@ Public Class MachineCNPageUC
       End If
    End Sub
 
+   Friend Sub CncModeChange(nMode As Integer)
+      m_nCurrMode = nMode
+      SetCncMode()
+   End Sub
+
 End Class

Machine/MachinePageUC.xaml

@@ -24,9 +24,10 @@
                <ColumnDefinition Width="2*"/>
                <ColumnDefinition Width="2*"/>
                <ColumnDefinition Width="2*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
                 <ToggleButton Name="AlarmsBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
@@ -38,11 +39,16 @@
                 <ToggleButton Name="MachiningDBBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
                     <Image Source="{DynamicResource DB-utensiliImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
                 </ToggleButton>
-                <ToggleButton Name="PolishingsBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowToggleButton}"></ToggleButton>
-                <ToggleButton Name="TestingPageBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                <ToggleButton Name="PolishingsBtn" Grid.Column="3" Style="{DynamicResource  OmagCut_BlueIconToggleButton}">
+                    <!--<Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>-->
+                </ToggleButton>
+                <ToggleButton Name="WaterJetBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_BlueIconToggleButton}">
+                    <!--<Image Source="{DynamicResource WaterJetImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>-->
+                </ToggleButton>
+                <ToggleButton Name="TestingPageBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
                     <Image Source="{DynamicResource MacchinaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
                 </ToggleButton>
-                <ToggleButton Name="StatisticsBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowToggleButton}">
+                <ToggleButton Name="StatisticsBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowToggleButton}">
                     
                 </ToggleButton>
 

Machine/MachinePageUC.xaml.vb

@@ -10,6 +10,7 @@ Public Class MachinePageUC
    Friend m_ToolsDbPageUC As ToolsDbPageUC
    Friend m_MachiningDbPageUC As MachiningDbPageUC
    Friend m_PolishingsPageUC As PolishingsPageUC
+   Friend m_WaterJetPageUC As WaterJetPageUC
    Friend m_MachineCNPageUC As MachineCNPageUC
    Friend m_StatisticsPageUC As StatisticsPageUC
 
@@ -21,6 +22,7 @@ Public Class MachinePageUC
       ToolsDb
       MachiningDb
       Polishings
+      WaterJet
       MachineCN
       Statistics
    End Enum
@@ -32,6 +34,7 @@ Public Class MachinePageUC
       m_ToolsDbPageUC = New ToolsDbPageUC
       m_MachiningDbPageUC = New MachiningDbPageUC
       m_PolishingsPageUC = New PolishingsPageUC
+      m_WaterJetPageUC = New WaterJetPageUC
       m_MachineCNPageUC = New MachineCNPageUC
       m_StatisticsPageUC = New StatisticsPageUC
 
@@ -40,6 +43,7 @@ Public Class MachinePageUC
       m_ToolsDbPageUC.SetValue(Grid.RowProperty, 1)
       m_MachiningDbPageUC.SetValue(Grid.RowProperty, 1)
       m_PolishingsPageUC.SetValue(Grid.RowProperty, 1)
+      m_WaterJetPageUC.SetValue(Grid.RowProperty, 1)
       m_MachineCNPageUC.SetValue(Grid.RowProperty, 1)
       m_StatisticsPageUC.SetValue(Grid.RowProperty, 1)
 
@@ -47,6 +51,7 @@ Public Class MachinePageUC
       ToolsDBBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 6)
       MachiningDBBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 7)
       PolishingsBtn.Content = EgtMsg(91090)
+      WaterJetBtn.Content = EgtMsg(91128)
       TestingPageBtn.ToolTip = EgtMsg(MSG_MACHINEPAGEUC + 8)
       StatisticsBtn.Content = EgtMsg(90709)
 
@@ -55,10 +60,14 @@ Public Class MachinePageUC
       m_ActiveMachinePage = MachinePages.Alarms
 
       ' Se lucidature non abilitate, disattivo la pagina DB lucidature
-      If Not m_MainWindow.m_CurrentMachine.bPolishing  Then
+      If Not m_MainWindow.m_CurrentMachine.bPolishing Then
          PolishingsBtn.IsEnabled = False
       End If
 
+      If Not m_MainWindow.m_CurrentMachine.bWaterJet Or Not m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+         WaterJetBtn.IsEnabled = False
+      End If
+
       ' Se controllo numerico 0, disattivo la pagina macchina
       If GetPrivateProfileInt(S_NUMERICALCONTROL, K_TYPE, 0, m_MainWindow.GetMachIniFile()) = 0 Then
          TestingPageBtn.IsEnabled = False
@@ -134,6 +143,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_AlarmsPageUC)
             m_ActiveMachinePage = MachinePages.Alarms
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               AlarmsBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            AlarmsBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_AlarmsPageUC)
+            m_ActiveMachinePage = MachinePages.Alarms
          Case MachinePages.MachineCN
             AlarmsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -188,6 +213,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_ToolsDbPageUC)
             m_ActiveMachinePage = MachinePages.ToolsDb
+         Case MachinePages.WaterJet
+            'Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               ToolsDBBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            ToolsDBBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_ToolsDbPageUC)
+            m_ActiveMachinePage = MachinePages.ToolsDb
          Case MachinePages.MachineCN
             ToolsDBBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -242,6 +283,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_MachiningDbPageUC)
             m_ActiveMachinePage = MachinePages.MachiningDb
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               MachiningDBBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            MachiningDBBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_MachiningDbPageUC)
+            m_ActiveMachinePage = MachinePages.MachiningDb
          Case MachinePages.MachineCN
             MachiningDBBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -299,6 +356,22 @@ Public Class MachinePageUC
             m_ActiveMachinePage = MachinePages.Polishings
          Case MachinePages.Polishings
             PolishingsBtn.IsChecked = True
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               PolishingsBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            PolishingsBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_PolishingsPageUC)
+            m_ActiveMachinePage = MachinePages.Polishings
          Case MachinePages.MachineCN
             PolishingsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -314,6 +387,77 @@ Public Class MachinePageUC
       End Select
    End Sub
 
+   Private Sub WaterJetBtn_Click(sender As Object, e As RoutedEventArgs) Handles WaterJetBtn.Click
+      Select Case m_ActiveMachinePage
+         Case MachinePages.Alarms
+            AlarmsBtn.IsChecked = False
+            WaterJetBtn.IsChecked = True
+            MachinePageGrid.Children.Remove(m_AlarmsPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+            'DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM).RefreshDImensionPage()
+         Case MachinePages.ToolsDb
+            ' Verifica ed eventuale salvataggio utensile corrente
+            If Not m_ToolsDbPageUC.SaveCurrTool() Then
+               PolishingsBtn.IsChecked = False
+               ToolsDBBtn.IsChecked = True
+               Return
+            End If
+            ' salvo il DB utensili
+            EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+            EgtTdbSave()
+            ' passo alla pagina WaterJet
+            WaterJetBtn.IsChecked = True
+            ToolsDBBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_ToolsDbPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+         Case MachinePages.MachiningDb
+            ' Verifica ed eventuale salvataggio lavorazione corrente
+            If Not m_MachiningDbPageUC.SaveCurrMachining() Then
+               WaterJetBtn.IsChecked = False
+               MachiningDBBtn.IsChecked = True
+               Return
+            End If
+            ' salvo il DB lavorazioni
+            EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+            EgtMdbSave()
+            ' passo alla pagina WaterJet
+            WaterJetBtn.IsChecked = True
+            MachiningDBBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_MachiningDbPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+         Case MachinePages.Polishings
+            ' Verifica ed eventuale salvataggio Lucidatura corrente
+            If Not m_PolishingsPageUC.SaveKit() Then
+               WaterJetBtn.IsChecked = False
+               PolishingsBtn.IsChecked = True
+               Return
+            End If
+            ' passo alla pagina WaterJet
+            WaterJetBtn.IsChecked = True
+            PolishingsBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_PolishingsPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+         Case MachinePages.WaterJet
+            WaterJetBtn.IsChecked = True
+         Case MachinePages.MachineCN
+            WaterJetBtn.IsChecked = True
+            TestingPageBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_MachineCNPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+         Case MachinePages.Statistics
+            WaterJetBtn.IsChecked = True
+            StatisticsBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_StatisticsPageUC)
+            MachinePageGrid.Children.Add(m_WaterJetPageUC)
+            m_ActiveMachinePage = MachinePages.WaterJet
+      End Select
+   End Sub
+
    Private Sub TestingPageBtn_Checked(sender As Object, e As RoutedEventArgs) Handles TestingPageBtn.Checked
       Select Case m_ActiveMachinePage
          Case MachinePages.Alarms
@@ -367,6 +511,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_MachineCNPageUC)
             m_ActiveMachinePage = MachinePages.MachineCN
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               TestingPageBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            TestingPageBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_MachineCNPageUC)
+            m_ActiveMachinePage = MachinePages.MachineCN
          Case MachinePages.MachineCN
             TestingPageBtn.IsChecked = True
          Case MachinePages.Statistics
@@ -431,6 +591,22 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_StatisticsPageUC)
             m_ActiveMachinePage = MachinePages.Statistics
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim nPressedBtn As Integer = DirectCast(m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               StatisticsBtn.IsChecked = False
+               WaterJetBtn.IsChecked = True
+               Return
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
+            ' passo alla pagina Dati Macchina
+            TestingPageBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_StatisticsPageUC)
+            m_ActiveMachinePage = MachinePages.Statistics
          Case MachinePages.MachineCN
             StatisticsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False
@@ -467,6 +643,19 @@ Public Class MachinePageUC
             MachinePageGrid.Children.Remove(m_PolishingsPageUC)
             MachinePageGrid.Children.Add(m_AlarmsPageUC)
             m_ActiveMachinePage = MachinePages.Alarms
+         Case MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Lucidatura corrente
+            'If Not m_PolishingsPageUC.SaveKit() Then
+            '   AlarmsBtn.IsChecked = False
+            '   PolishingsBtn.IsChecked = True
+            '   Return
+            'End If
+            ' passo alla pagina Dati Macchina
+            AlarmsBtn.IsChecked = True
+            WaterJetBtn.IsChecked = False
+            MachinePageGrid.Children.Remove(m_WaterJetPageUC)
+            MachinePageGrid.Children.Add(m_AlarmsPageUC)
+            m_ActiveMachinePage = MachinePages.Alarms
          Case MachinePages.MachineCN
             AlarmsBtn.IsChecked = True
             TestingPageBtn.IsChecked = False

Machine/MachineStatusUC.xaml

@@ -423,8 +423,8 @@
 
                   <TextBlock Grid.Column="0" Name="ConsumptionNameTxBx" Text="A"
             Style="{StaticResource OmagCut_LowerBarTitleTextBlock}"/>
-                  <TextBlock Grid.Column="1" Name="ConsumptionTxBx" Text="25"
-            Style="{StaticResource OmagCut_LowerBarValueTextBlock}"/>
+                  <TextBlock Grid.Column="1" Name="ConsumptionTxBx" Text="25.00"
+            Style="{StaticResource OmagCut_LowerBarValueTextBlock}" FontSize="22"/>
 
                </Grid>
 

Machine/MachineStatusUC.xaml.vb

@@ -248,16 +248,16 @@ Public Class MachineStatusUC
          dL3 = ptTip.z
       End If
       ' Visualizzazione
-      Axis1TxBx.Text = LenToString(dL1, -3)
-      Axis2TxBx.Text = LenToString(dL2, -3)
-      Axis3TxBx.Text = LenToString(dL3, -3)
+      Axis1TxBx.Text = LenToString(dL1, -3, True)
+      Axis2TxBx.Text = LenToString(dL2, -3, True)
+      Axis3TxBx.Text = LenToString(dL3, -3, True)
       Axis4TxBx.Text = DoubleToString(dR1, -3)
       Axis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then Axis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayPositionDelta()
@@ -265,22 +265,28 @@ Public Class MachineStatusUC
       Dim dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10 As Double
       m_MainWindow.m_CNCommunication.GetAxesDeltas(dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10)
       ' Visualizzazione
-      DeltaAxis1TxBx.Text = LenToString(dL1, -3)
-      DeltaAxis2TxBx.Text = LenToString(dL2, -3)
-      DeltaAxis3TxBx.Text = LenToString(dL3, -3)
+      DeltaAxis1TxBx.Text = LenToString(dL1, -3, True)
+      DeltaAxis2TxBx.Text = LenToString(dL2, -3, True)
+      DeltaAxis3TxBx.Text = LenToString(dL3, -3, True)
       DeltaAxis4TxBx.Text = DoubleToString(dR1, -3)
       DeltaAxis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then DeltaAxis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayFeed()
       Dim dRealFeed As Double = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+      ' modifica richiesta 26/05/2023 da Rosario per cliente Lanzetta
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         dRealFeed = m_CN.d_DInterpo_Prog_Feed
+      Else
+         dRealFeed = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+      End If
       'Feed = DoubleToString(dRealFeed, 0)
-      FeedTxBx.Text = LenToString(dRealFeed, 0)
+      FeedTxBx.Text = LenToString(dRealFeed, 0, True)
       'FeedOverride = DoubleToString(m_CN.d_DInterpo_Feed_override, 0) & "%"
       Dim dFeedOverride As Double = m_CN.d_DInterpo_Feed_override
       FeedOverrideTxBx.Text = DoubleToString(dFeedOverride, 0) & "%"
@@ -304,6 +310,8 @@ Public Class MachineStatusUC
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          dSpindlePower = m_CN.d_data(0)
          dSpindleOvr = m_CN.d_data(1)
+      ElseIf m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         dSpindlePower = m_CN.d_spindle_power / 1000
       Else
          dSpindlePower = m_CN.d_spindle_power
          dSpindleOvr = If(m_CN.bPowerOvr > 0, m_CN.d_spindle_power / m_CN.bPowerOvr * 100, 0)

Machine/MachiningDbPageUC.xaml

@@ -246,7 +246,7 @@
 
             <TextBlock Name="SideAngleTxBl" Grid.Column="2" Grid.Row="3" Grid.RowSpan="3"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="3" Grid.Row="3" Grid.RowSpan="3" Margin="0,0,15,0"
+            <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="3" Grid.Row="3" Grid.RowSpan="3" Margin="0,0,15,0" IsLength="False"
                Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
             <TextBlock Name="StepTypeTxBl" Grid.Column="0" Grid.Row="6" Grid.RowSpan="3"
@@ -576,7 +576,7 @@
 
                 <TextBlock Name="ForwardAngleTxBl" Grid.Column="0" Grid.Row="6" Grid.RowSpan="3"
                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                <EgtWPFLib:EgtTextBox Name="ForwardAngleTxBx" Grid.Column="1" Grid.Row="6" Grid.RowSpan="3"
+                <EgtWPFLib:EgtTextBox Name="ForwardAngleTxBx" Grid.Column="1" Grid.Row="6" Grid.RowSpan="3" IsLength="False"
                      Style="{DynamicResource OmagCut_MachLeftCalculatorTextBoxInBorder}" />
 
                 <Border Name="LiHoleBrd" Grid.Column="0" Grid.Row="9" Grid.ColumnSpan="4" Grid.RowSpan="6"
@@ -605,12 +605,12 @@
 
                         <TextBlock Name="LpTurnsTxBl" Grid.Column="0" Grid.Row="1" Grid.RowSpan="2" 
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                        <EgtWPFLib:EgtTextBox Name="LpTurnsTxBx" Grid.Column="1" Grid.Row="1"
+                        <EgtWPFLib:EgtTextBox Name="LpTurnsTxBx" Grid.Column="1" Grid.Row="1" IsLength="False"
                              Style="{DynamicResource OmagCut_MachLeftCalculatorTextBoxInBorder}" />
 
                         <TextBlock Name="HpTurnsTxBl" Grid.Column="2" Grid.Row="1"
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                        <EgtWPFLib:EgtTextBox Name="HpTurnsTxBx" Grid.Column="3" Grid.Row="1"
+                        <EgtWPFLib:EgtTextBox Name="HpTurnsTxBx" Grid.Column="3" Grid.Row="1" IsLength="False"
                              Style="{DynamicResource OmagCut_MachLeftCalculatorTextBoxInBorder}" />
 
                     </Grid>
@@ -725,7 +725,7 @@
 
                <TextBlock Name="SpeedTxBl" Grid.Column="0"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1"
+               <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1" IsLength="False"
                   Style="{DynamicResource OmagCut_MachToolCalculatorTextBox}" />
 
             </Grid>
@@ -931,14 +931,16 @@
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="11*"/>
+               <ColumnDefinition Width="10*"/>
+               <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
                 <Button Name="NewBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
                 <Button Name="SaveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
                 <Button Name="RemoveBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
-
+                <Button Name="ExportBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
+                <Button Name="ImportBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
             </Grid>
 
       </Grid>

Machine/MachiningDbPageUC.xaml.vb

@@ -3,6 +3,7 @@ Imports System.ComponentModel
 Imports OmagCUT.TreeViewItem
 Imports EgtUILib
 Imports EgtWPFLib
+Imports EgtWPFLib5
 
 Public Class MachiningDbPageUC
 
@@ -78,6 +79,8 @@ Public Class MachiningDbPageUC
       NewBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 16)
       SaveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 17)
       RemoveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 18)
+      ExportBtn.Content = "Export"
+      ImportBtn.Content = "Import"
 
       NameTxBl.Text = EgtMsg(MSG_MACHININGSDBPAGEUC + 1)
       DepthTxBl.Text = EgtMsg(MSG_MACHININGSDBPAGEUC + 2)
@@ -321,6 +324,193 @@ Public Class MachiningDbPageUC
       End If
    End Sub
 
+   Private Sub ExportBtn_Click(Sender As Object, e As RoutedEventArgs) Handles ExportBtn.Click
+      ' contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+
+      ' creo lista lavorazioni per esportazione
+      Dim MachiningToExportList As New ObservableCollection(Of ImpExpMachiningFamily)
+      Dim Family As CathegoryItem
+      Dim Machining As CustomItem
+      For Each Family In MachiningsList
+         Dim ImpExpMachiningFamily As New ImpExpMachiningFamily(Family.Name, Family.nTType)
+         For Each Machining In Family.Items
+            ImpExpMachiningFamily.MachiningList.Add(New ImpExpMachiningItem(Machining.Name, False))
+         Next
+         MachiningToExportList.Add(ImpExpMachiningFamily)
+      Next
+      Dim ExportWndVM As New ImportExportMachiningWindowVM(MachiningToExportList, true)
+      Dim ExportWnd As New ImportExportMachiningWindowWD(Application.Current.MainWindow, ExportWndVM)
+
+      ExportWnd.ShowDialog()
+   End Sub
+
+   Private Sub ImoportBtn_Click() Handles ImportBtn.Click
+      ' contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' apro dialogo di scelta file
+      Dim ImportFileDlg As New Microsoft.Win32.OpenFileDialog() With {
+         .Title = EgtMsg(31161) & " " & EgtMsg(31163),
+         .DefaultExt = ".data",
+         .Filter = "Machinings (.data)|*.data",
+         .CheckFileExists = True,
+         .ValidateNames = True
+      }
+      If ImportFileDlg.ShowDialog() <> True Then Return
+      Dim ImportFilePath As String = ImportFileDlg.FileName
+      ' recupero liste utensili da importare
+      Dim ImportFileMachiningNameList As String() = Nothing
+      Dim ImportFileMachiningFamilyList As Integer() = Nothing
+      If Not EgtMdbToBeImported(ImportFilePath, ImportFileMachiningNameList, ImportFileMachiningFamilyList) Then Return
+      ' li inserisco in lista per finestra di scelta
+      Dim MachinigToImportList As New ObservableCollection(Of ImpExpMachiningFamily)
+      ' creo famiglie di utensili in base a quelle trovate in lista importata
+      For MachiningIndex As Integer = 0 To ImportFileMachiningNameList.Count - 1
+         Dim MachiningName As String = ImportFileMachiningNameList(MachiningIndex)
+         Dim MachiningFamily As Integer = ImportFileMachiningFamilyList(MachiningIndex)
+         MachiningFamily = MachiningFamily And
+            (MCH_MY.DRILLING Or
+            MCH_MY.SAWING Or
+            MCH_MY.MILLING Or
+            MCH_MY.POCKETING Or
+            MCH_MY.MORTISING Or
+            MCH_MY.SAWROUGHING Or
+            MCH_MY.SAWFINISHING Or
+            MCH_MY.GENMACHINING Or
+            MCH_MY.CHISELING Or
+            MCH_MY.SURFROUGHING Or
+            MCH_MY.SURFFINISHING Or
+            MCH_MY.WATERJETTING)
+         Dim bFounded As Boolean = False
+         Dim MachinigToImportFamily As ImpExpMachiningFamily
+         For Each MachinigToImportFamily In MachinigToImportList
+            If (MachiningFamily = MachinigToImportFamily.FamilyType) Then
+               MachinigToImportFamily.MachiningList.Add(New ImpExpMachiningItem(MachiningName, AlreadyExist(MachiningName)))
+               bFounded = True
+               Exit For
+            End If
+         Next
+         If Not bFounded Then
+            Dim NewFamily As New ImpExpMachiningFamily(GetMachiningFamilyName(MachiningFamily), MachiningFamily)
+            NewFamily.MachiningList.Add(New ImpExpMachiningItem(MachiningName, AlreadyExist(MachiningName)))
+            MachinigToImportList.Add(NewFamily)
+         End If
+      Next
+      Dim ImportWndVM As New ImportExportMachiningWindowVM(MachinigToImportList, False, ImportFilePath, ImportFileMachiningNameList)
+      Dim ImportWnd As New ImportExportMachiningWindowWD(Application.Current.MainWindow, ImportWndVM)
+
+      ImportWnd.ShowDialog()
+      ' Aggiungo all'albero visualizzato gli utensili appena importati
+      If ImportWnd.OkResult Then
+         LoadImportedMachineMachinings(ImportWndVM.vsImported)
+      End If
+   End Sub
+
+   Private Function AlreadyExist(MachiningName As String) As Boolean
+      Dim MachiningFamily As CathegoryItem
+      For Each MachiningFamily In MachiningsList
+         Dim MachiningItem As CustomItem
+         For Each MachiningItem In MachiningFamily.Items
+            If MachiningName = MachiningItem.Name Then
+               Return True
+            End If
+         Next
+      Next
+      Return False
+   End Function
+
+   Private Function GetMachiningFamilyName(NewMachinigFamily As Integer) As String
+      Dim MachiningFamily As CathegoryItem
+      For Each MachiningFamily In MachiningsList
+         If NewMachinigFamily = MachiningFamily.nTType Then
+            Return MachiningFamily.Name
+         End If
+      Next
+      Return ""
+   End Function
+
+   Private Sub LoadImportedMachineMachinings(vsImportedMachinings As String())
+      ' Leggo tutte le lavorazioni presenti nella Macchina (quindi anche quelli appena importati). 
+      Dim ActiveMachiningsFamilies() As MachiningsType = MyReadMachiningFamilies(m_MainWindow.m_CurrentMachine.sMachIniFile)
+      Dim MachiningsFamilyIndex As Integer = 0
+      Dim MachiningsFamilyItem As MachiningsType
+      For Each MachiningsFamilyItem In ActiveMachiningsFamilies
+         Dim FamilyTreeView As New CathegoryItem(MachiningsFamilyItem.Name, MachiningsFamilyItem.Id)
+         Dim MachiningFamilyItem = MachiningsList.FirstOrDefault(Function(MachiningFamily) MachiningsFamilyItem.Id = MachiningFamily.nTType)
+         If IsNothing(MachiningFamilyItem) Then
+            MachiningsList.Insert(MachiningsFamilyIndex, FamilyTreeView)
+         End If
+         Dim nType As Integer = 0
+         Dim MachiningName As String = String.Empty
+         Dim MachiningIndex As Integer = 0
+         EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+         Dim bFound As Boolean = EgtMdbGetFirstMachining(MachiningsFamilyItem.Id, MachiningName)
+         While bFound
+            Dim MachiningItem = MachiningsList(MachiningsFamilyIndex).Items.FirstOrDefault(Function(Machining) Machining.Name = MachiningName)
+            Dim bInList As Boolean = vsImportedMachinings.Contains(MachiningName)
+            If bInList Then
+               ' Se una lavorazione è presente nella MachiningsList visualizzata ma nel contempo è nell'array vsImported 
+               ' vuol dire che è stata sovrascritta perciò la rimuovo
+               MachiningsList(MachiningsFamilyIndex).Items.Remove(MachiningsList(MachiningsFamilyIndex).Items.FirstOrDefault(Function(Machining) Machining.Name = MachiningName))
+            End If
+            If bInList OrElse IsNothing(MachiningItem) Then
+               ' recupero tuuid
+               EgtMdbSetCurrMachining(MachiningName)
+               Dim sCurrMachTUUID As String = String.Empty
+               EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sCurrMachTUUID)
+               ' aggiungo la lavorazione importata
+               MachiningsList(MachiningsFamilyIndex).Items.Insert(MachiningIndex, New CustomItem(MachiningName, MachiningsFamilyItem.Id, ToolDbUtility.IsToolInDb(sCurrMachTUUID)))
+               ' eventualmente evidezio l'ultimo elemento inserito (ERRORE: non espando l'albero)
+               'MachiningsList(MachiningsFamilyIndex).Items(MachiningIndex).IsSelected = True
+            End If
+            MachiningIndex += 1
+            bFound = EgtMdbGetNextMachining(MachiningsFamilyItem.Id, MachiningName)
+         End While
+         MachiningsFamilyIndex += 1
+      Next
+   End Sub
+
+   Public Function MyReadMachiningFamilies(sMachineIniPath As String) As MachiningsType()
+      Dim ActiveMachiningsFamiliesList As New List(Of MachiningsType)
+      ' Se il materiale lavorato è Marmo l'ordine di lettura e inserimento di Foratura e Taglio di lama nelle famiglie di lavorazioni attive è invertito 
+
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_SAWING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.SAWING, .Name = EgtMsg(31200 + 2)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_DRILLING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.DRILLING, .Name = EgtMsg(31200 + 1)})
+      End If
+
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_MILLING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.MILLING, .Name = EgtMsg(31200 + 3)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_POCKETING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.POCKETING, .Name = EgtMsg(31200 + 4)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_MORTISING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.MORTISING, .Name = EgtMsg(31200 + 5)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_SAWROUGHING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.SAWROUGHING, .Name = EgtMsg(31200 + 6)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_SAWFINISHING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.SAWFINISHING, .Name = EgtMsg(31200 + 7)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_GENMACHINING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.GENMACHINING, .Name = EgtMsg(31200 + 8)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_CHISELING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.CHISELING, .Name = EgtMsg(31200 + 9)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_SURFFINISHING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.SURFFINISHING, .Name = EgtMsg(31211)})
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_MACHININGS, K_WATERJETTING, 0, sMachineIniPath) <> 0 Then
+         ActiveMachiningsFamiliesList.Add(New MachiningsType With {.Id = MCH_MY.WATERJETTING, .Name = EgtMsg(31210)})
+      End If
+      Return ActiveMachiningsFamiliesList.ToArray
+   End Function
+
    Private Sub InitializeMachiningFamily(bEnabled As Boolean, nFType As Integer, sFName As String)
       If Not bEnabled Then Return
       ' Inserisco categoria ed eventuali elementi
@@ -362,12 +552,15 @@ Public Class MachiningDbPageUC
       HeadSideCmBx.SelectedIndex = ToolInt - 1
       EgtMdbGetCurrMachiningParam(MCH_MP.LEADINTYPE, ToolInt)
       If LeadInTypeCmBx.Items.Count > 0 Then
-         LeadInTypeCmBx.SelectedItem =  LeadInTypeCmBx.Items(0)
+         LeadInTypeCmBx.SelectedItem = LeadInTypeCmBx.Items(0)
       Else
          LeadInTypeCmBx.SelectedItem = Nothing
       End If
       For Each LInType As IdNameStruct In LeadInTypeCmBx.Items
-         If ToolInt = LInType.Id Then LeadInTypeCmBx.SelectedItem = LInType
+         If ToolInt = LInType.Id Then
+            LeadInTypeCmBx.SelectedItem = LInType
+            Exit For
+         End If
       Next
       EgtMdbGetCurrMachiningParam(MCH_MP.EXTLINKTYPE, ToolInt)
       ExtLinkTypeCmBx.SelectedIndex = ToolInt
@@ -515,7 +708,11 @@ Public Class MachiningDbPageUC
       ' Lista materiali
       m_MaterialsList.Clear()
       For Each Material As Material In m_MainWindow.m_CurrentMachine.Materials
-         m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName))
+         If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+            m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName, Material.SubId))
+         Else
+            m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName))
+         End If
       Next
       EgtMdbGetCurrMachiningParam(MCH_MP.SYSNOTES, ToolString)
       If ToolString <> String.Empty Then
@@ -523,14 +720,30 @@ Public Class MachiningDbPageUC
          Dim Index As Integer = 0
          For Each Material As MachiningMaterial In m_MaterialsList
             Dim Param() As String = sItems(Index).Split(",".ToCharArray)
+            Dim SubParam() As String = Param(0).Split(".".ToCharArray)
             Dim nParId As Integer = 0
-            If StringToInt(Param(0), nParId) AndAlso nParId = Material.nId Then
-               StringToDouble(Param(1), Material.dMinThickness)
-               StringToDouble(Param(2), Material.dMaxThickness)
-               Material.VerifyIfActive()
-               Index += 1
+            Dim nSubParId As Integer = 0
+            If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+               If StringToInt(SubParam(0), nParId) AndAlso nParId = Material.nId AndAlso SubParam.Count > 1 AndAlso
+                  StringToInt(SubParam(1), nSubParId) AndAlso nSubParId = Material.nSubId Then
+
+                  StringToDouble(Param(1), Material.dMinThickness)
+                  StringToDouble(Param(2), Material.dMaxThickness)
+                  Material.VerifyIfActive()
+                  Index += 1
+               Else
+                  Material.VerifyIfActive()
+               End If
             Else
-               Material.VerifyIfActive()
+               If StringToInt(Param(0), nParId) AndAlso nParId = Material.nId Then
+
+                  StringToDouble(Param(1), Material.dMinThickness)
+                  StringToDouble(Param(2), Material.dMaxThickness)
+                  Material.VerifyIfActive()
+                  Index += 1
+               Else
+                  Material.VerifyIfActive()
+               End If
             End If
          Next
       End If
@@ -609,13 +822,13 @@ Public Class MachiningDbPageUC
       ' Parmetri nascosti di svuotatura
       If nMachiningType = MCH_MY.POCKETING Then
          EgtMdbSetCurrMachiningParam(MCH_MP.SUBTYPE, MCH_POCK_SUB.SPIRALOUT)
-         EgtMdbSetCurrMachiningParam( MCH_MP.LEADINTYPE, MCH_POCK_LI.HELIX)
+         ' EgtMdbSetCurrMachiningParam( MCH_MP.LEADINTYPE, MCH_POCK_LI.HELIX)
          Dim dToolDiam As Double = 100
          If Not IsNothing(ToolCmBx.SelectedItem) Then
             EgtTdbSetCurrTool( ToolCmBx.SelectedItem.ToString())
             EgtTdbGetCurrToolParam( MCH_TP.DIAM, dToolDiam)
          End If
-         EgtMdbSetCurrMachiningParam( MCH_MP.LITANG, 0.495 * dToolDiam)
+         EgtMdbSetCurrMachiningParam(MCH_MP.LITANG, 0.99 * dToolDiam)
          EgtMdbSetCurrMachiningParam( MCH_MP.LIELEV, 2.0)
       End If
       ' Parametri WaterJetting
@@ -684,8 +897,14 @@ Public Class MachiningDbPageUC
       ' Scrivo stringa materiali da lista
       Dim sMaterialString As String = String.Empty
       For Each Material As MachiningMaterial In m_MaterialsList
-         If Material.bIsActive Then
-            sMaterialString += Material.nId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
+         If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+            If Material.bIsActive Then
+               sMaterialString += Material.nId.ToString & "." & Material.nSubId.ToString & "," & DoubleToString(Material.dMinThickness, 3) & "," & DoubleToString(Material.dMaxThickness, 3) & ";"
+            End If
+         Else
+            If Material.bIsActive Then
+               sMaterialString += Material.nId.ToString & "," & DoubleToString(Material.dMinThickness, 3) & "," & DoubleToString(Material.dMaxThickness, 3) & ";"
+            End If
          End If
       Next
       EgtMdbSetCurrMachiningParam(MCH_MP.SYSNOTES, sMaterialString)
@@ -922,30 +1141,26 @@ Public Class MachiningDbPageUC
             ' Definizione della grid TypeGrd con la giusta altezza e numero di righe
             Dim RowNum As Integer = TypeGrd.RowDefinitions.Count
             If RowNum > 2 Then
+               ' elimino eventuali righe in eccesso
                For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
             ElseIf RowNum < 2 Then
                ' costruiso una riga in più da inserire
                Dim Row As New RowDefinition
                TypeGrd.RowDefinitions.Add(Row)
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
             End If
+            LeadInTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 0)
+            LeadInTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
+            LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
+            TypeBrd.SetValue(Grid.RowProperty, 12)
+            TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+
             LeadInTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadInTypeCmBx.Visibility = Windows.Visibility.Visible
             ExtLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
@@ -1563,7 +1778,7 @@ Public Class MachiningDbPageUC
             StepTypeTxBl.Visibility = Windows.Visibility.Hidden
             StepTypeCmBx.Visibility = Windows.Visibility.Hidden
             SideBrd.SetValue(Grid.RowProperty, 9)
-            SideBrd.Visibility = Windows.Visibility.Visible
+            SideBrd.Visibility = Windows.Visibility.Hidden
             WorkSideTxBl.Visibility = Windows.Visibility.Hidden
             WorkSideCmBx.Visibility = Windows.Visibility.Hidden
             HeadSideTxBl.Visibility = Windows.Visibility.Hidden
@@ -1575,15 +1790,22 @@ Public Class MachiningDbPageUC
                For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+            ElseIf RowNum < 2 Then
+               ' costruiso una riga in più da inserire
+               Dim Row As New RowDefinition
+               TypeGrd.RowDefinitions.Add(Row)
             End If
+            LeadInTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 0)
+            LeadInTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
+            LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
+            TypeBrd.SetValue(Grid.RowProperty, 12)
+            TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+
             LeadInTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadInTypeCmBx.Visibility = Windows.Visibility.Visible
             ExtLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
@@ -2068,6 +2290,16 @@ Public Class MachiningDbPageUC
 
    Private Sub MaxThicknessTxBx_EgtClosed(sender As Object, e As EventArgs) Handles MaxThicknessTxBx.EgtClosed
       Dim SelectedMaterial As MachiningMaterial = MaterialsList.SelectedItem
+      Dim dMaxThick As Double = 0
+      If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+         ' solo per water jet controllo lo spessore massimo ammissibile
+         dMaxThick = m_MainWindow.m_CurrentMachine.GetMaxThicknessCurrMaterial(SelectedMaterial.Name)
+         Dim dVal As Double
+         StringToLen(MaxThicknessTxBx.Text, dVal)
+         If dVal > dMaxThick Then
+            MaxThicknessTxBx.Text = LenToString(dMaxThick, 3)
+         End If
+      End If
       StringToLen(MaxThicknessTxBx.Text, SelectedMaterial.dMaxThickness)
       SelectedMaterial.VerifyIfActive()
    End Sub
@@ -2143,7 +2375,6 @@ Public Class MachiningDbPageUC
          Case MCH_MY.POCKETING
             LeadInTypeCmBx.ItemsSource = New ObservableCollection(Of IdNameStruct)(
                                           {New IdNameStruct(MCH_POCK_LI.NONE, EgtMsg(MSG_COMBOBOXPARAM + 42)),
-                                           New IdNameStruct(MCH_POCK_LI.GLIDE, EgtMsg(MSG_COMBOBOXPARAM + 48)),
                                            New IdNameStruct(MCH_POCK_LI.ZIGZAG, EgtMsg(MSG_COMBOBOXPARAM + 38)),
                                            New IdNameStruct(MCH_POCK_LI.HELIX, EgtMsg(MSG_COMBOBOXPARAM + 49))})
             LeadOutTypeCmBx.ItemsSource = New ObservableCollection(Of IdNameStruct)(
@@ -2215,6 +2446,7 @@ Class MachiningMaterial
    Implements INotifyPropertyChanged
 
    Private m_nId As Integer
+   Private m_nSubId As Integer
    Private m_sName As String
    Private m_dMinThickness As Double
    Private m_dMaxThickness As Double
@@ -2226,6 +2458,12 @@ Class MachiningMaterial
       End Get
    End Property
 
+   Public ReadOnly Property nSubId As Integer
+      Get
+         Return m_nSubId
+      End Get
+   End Property
+
    Public ReadOnly Property Name As String
       Get
          Return m_sName
@@ -2264,6 +2502,15 @@ Class MachiningMaterial
       m_bIsActive = False
    End Sub
 
+   Sub New(nId As Integer, sName As String, nSubId As Integer)
+      m_nId = nId
+      m_nSubId = nSubId
+      m_sName = sName
+      m_dMinThickness = 0
+      m_dMaxThickness = 0
+      m_bIsActive = False
+   End Sub
+
    Public Sub VerifyIfActive()
       Dim bIsActive As Boolean = ( m_dMaxThickness > m_dMinThickness + EPS_SMALL)
       If bIsActive <> m_bIsActive Then

Machine/PolishingsPageUC.xaml

@@ -158,6 +158,9 @@
                                 <ColumnDefinition Width="2*"/>
                                 <ColumnDefinition Width="2*"/>
                                 <ColumnDefinition Width="2*"/>
+                                <ColumnDefinition Width="2*"/>
+                                <ColumnDefinition Width="2*"/>
+                                
                             </Grid.ColumnDefinitions>
                             <Grid.RowDefinitions>
                                 <RowDefinition Height="0.5*"/>
@@ -165,10 +168,12 @@
                                 <RowDefinition Height="1*"/>
                                 <RowDefinition Height="1*"/>
                                 <RowDefinition Height="1*"/>
+                                <RowDefinition Height="1*"/>
                                 <RowDefinition Height="0.5*"/>
 
                             </Grid.RowDefinitions>
 
+                    <!--Decrizione immagini-->        
                     <Border Grid.Row="1" Grid.Column="1" Margin="10">
                         <Image Source="../Resources/Contour.png" Stretch="Uniform"/>
                     </Border>
@@ -178,24 +183,45 @@
                     <Border Grid.Row="3" Grid.Column="1" Margin="10">
                         <Image Source="../Resources/ZigZagY.png" Stretch="Uniform"/>
                     </Border>
+                    <Border Grid.Row="4" Grid.Column="1" Margin="10">
+                        <Image Source="../Resources/Spiral.png" Stretch="Uniform"/>
+                    </Border>
 
-                    <TextBlock Name="MotionTxBl" Grid.Row="0" Grid.Column="1" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
-                    <TextBlock Name="RepeatTxBl" Grid.Row="0" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
-                    <TextBlock Name="StepTxBl" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
-                    <TextBlock Name="OffSetTxBl" Grid.Row="0" Grid.Column="4" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
+                            <!--Titolazione colonne-->
+                    <TextBlock Name="MotionTxBl" Grid.Row="0" Grid.Column="1" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="RepeatTxBl" Grid.Row="0" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="StepTxBl" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="OffSetTxBl" Grid.Row="0" Grid.Column="4" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="RadiusTxBl" Grid.Row="0" Grid.Column="5" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="DistanceTxBl" Grid.Row="0" Grid.Column="6" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
 
-                    <EgtWPFLib:EgtTextBox Name="ContourTxBx" Grid.Row="1" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="OffContourTxBx" Grid.Row="1" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                    <!--Contornatura-->
+                    <EgtWPFLib:EgtTextBox Name="ContourTxBx" Grid.Row="1" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffContourTxBx" Grid.Row="1" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
                             
-                    <EgtWPFLib:EgtTextBox Name="ZigZagXTxBx" Grid.Row="2" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="StepXTxBx" Grid.Row="2" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="OffZigZagXTxBx" Grid.Row="2" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-
-                    <EgtWPFLib:EgtTextBox Name="ZigZagYTxBx" Grid.Row="3" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="StepYTxBx" Grid.Row="3" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="OffZigZagYTxBx" Grid.Row="3" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                    <!--Cammino orizzontale X-->
+                    <EgtWPFLib:EgtTextBox Name="ZigZagXTxBx" Grid.Row="2" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="StepXTxBx" Grid.Row="2" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffZigZagXTxBx" Grid.Row="2" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="RadiusXTxBx" Grid.Row="2" Grid.Column="5" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
+                    <EgtWPFLib:EgtTextBox Name="DistanceXTxBx" Grid.Row="2" Grid.Column="6" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
                             
-                    <GroupBox Name="LiLoGpBx" Grid.Row="4" Grid.Column="1" Grid.RowSpan="2" Grid.ColumnSpan="3" Style="{DynamicResource OmagCut_GroupBox}">
+                    <!--Cammino verticale Y-->
+                    <EgtWPFLib:EgtTextBox Name="ZigZagYTxBx" Grid.Row="3" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="StepYTxBx" Grid.Row="3" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffZigZagYTxBx" Grid.Row="3" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="RadiusYTxBx" Grid.Row="3" Grid.Column="5" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
+                    <EgtWPFLib:EgtTextBox Name="DistanceYTxBx" Grid.Row="3" Grid.Column="6" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
+                            
+                    <!--Cammino a spirale-->
+                    <EgtWPFLib:EgtTextBox Name="SpiralTxBx" Grid.Row="4" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="StepSpiralTxBx" Grid.Row="4" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffSpiralTxBx" Grid.Row="4" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="RadiusSpiralTxBx" Grid.Row="4" Grid.Column="5" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="DistanceSpiralTxBx" Grid.Row="4" Grid.Column="6" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+
+                            <!--Parametri di lavoro condivisi-->
+                    <GroupBox Name="LiLoGpBx" Grid.Row="5" Grid.Column="1" Grid.RowSpan="2" Grid.ColumnSpan="5" Style="{DynamicResource OmagCut_GroupBox}">
                         <Grid Name="LiLoGrd">
                             <Grid.ColumnDefinitions>
                                 <ColumnDefinition Width="2*"/>
@@ -212,11 +238,11 @@
                            </Grid.RowDefinitions>
 
                             <TextBlock Name="LiLenTxBl" Grid.Row="1" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                            <EgtWPFLib:EgtTextBox Name="LiLenTxBx" Grid.Row="1" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                            <EgtWPFLib:EgtTextBox Name="LiLenTxBx" Grid.Row="1" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
                             <TextBlock Name="LiHeightTxBl" Grid.Row="1" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                            <EgtWPFLib:EgtTextBox Name="LiHeightTxBx" Grid.Row="1" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                            <EgtWPFLib:EgtTextBox Name="LiHeightTxBx" Grid.Row="1" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
                             <TextBlock Name="LiLoadTxBl" Grid.Row="3" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                            <EgtWPFLib:EgtTextBox Name="LiLoadTxBx" Grid.Row="3" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                            <EgtWPFLib:EgtTextBox Name="LiLoadTxBx" Grid.Row="3" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
 
                         </Grid>
                     </GroupBox>

Machine/PolishingsPageUC.xaml.vb

@@ -61,6 +61,8 @@ Public Class PolishingsPageUC
       RepeatTxBl.Text = EgtMsg(91093)             ' Ripetizioni
       StepTxBl.Text = EgtMsg(90787)               ' Passo
       OffSetTxBl.Text = EgtMsg(91089)             ' Offset
+      RadiusTxBl.Text = EgtMsg(91139)             ' Raggio
+      DistanceTxBl.Text = EgtMsg(91140)           ' Distanza
       LiLoGpBx.Header = EgtMsg(91094)             ' Attacco/Uscita
       LiLenTxBl.Text = EgtMsg(91097)              ' Lunghezza
       LiHeightTxBl.Text = EgtMsg(91095)           ' Altezza
@@ -452,7 +454,9 @@ Public Class PolishingsPageUC
                   If KitMachItem.m_IsModifiedId OrElse KitMachItem.m_IsModifiedToolUUID OrElse KitMachItem.m_IsModifiedToolName OrElse KitMachItem.m_IsModifiedSelTool OrElse
                      KitMachItem.m_IsModifiedActive OrElse KitMachItem.m_IsModifiedContour OrElse KitMachItem.m_IsModifiedOffCnt OrElse KitMachItem.m_IsModifiedZigZagX OrElse
                      KitMachItem.m_IsModifiedOffZigZagX OrElse KitMachItem.m_IsModifiedZigZagY OrElse KitMachItem.m_IsModifiedStepX OrElse KitMachItem.m_IsModifiedStepY OrElse
-                     KitMachItem.m_IsModifiedOffZigZagY OrElse KitMachItem.m_IsModifiedLiLen OrElse KitMachItem.m_IsModifiedLiHeight OrElse KitMachItem.m_IsModifiedLiLoad Then
+                     KitMachItem.m_IsModifiedOffZigZagY OrElse KitMachItem.m_IsModifiedSpiral OrElse KitMachItem.m_IsModifiedOffSpiral OrElse KitMachItem.m_IsModifiedStepSpiral OrElse
+                     KitMachItem.m_IsModifiedRadiusSpiral OrElse KitMachItem.m_IsModifiedDistanceSpiral OrElse KitMachItem.m_IsModifiedLiLen OrElse KitMachItem.m_IsModifiedLiHeight OrElse
+                     KitMachItem.m_IsModifiedLiLoad Then
                      Return True
                   End If
                Next
@@ -476,10 +480,19 @@ Public Class PolishingsPageUC
             KitMachItem.m_IsModifiedOffCnt = False
             KitMachItem.m_IsModifiedZigZagX = False
             KitMachItem.m_IsModifiedOffZigZagX = False
+            KitMachItem.m_IsModifiedRadiusX = False
+            KitMachItem.m_IsModifiedDistanceX = False
             KitMachItem.m_IsModifiedZigZagY = False
             KitMachItem.m_IsModifiedOffZigZagY = False
+            KitMachItem.m_IsModifiedRadiusY = False
+            KitMachItem.m_IsModifiedDistanceY = False
+            KitMachItem.m_IsModifiedSpiral = False
+            KitMachItem.m_IsModifiedOffSpiral = False
+            KitMachItem.m_IsModifiedRadiusSpiral = False
+            KitMachItem.m_IsModifiedDistanceSpiral = False
             KitMachItem.m_IsModifiedStepX = False
             KitMachItem.m_IsModifiedStepY = False
+            KitMachItem.m_IsModifiedStepSpiral = False
             KitMachItem.m_IsModifiedLiLen = False
             KitMachItem.m_IsModifiedLiHeight = False
             KitMachItem.m_IsModifiedLiLoad = False
@@ -493,20 +506,29 @@ Public Class PolishingsPageUC
       OffContourTxBx.Text = LenToString(kmShow.dOffsetCnt, 3)
       ZigZagXTxBx.Text = kmShow.nZigZagX.ToString()
       OffZigZagXTxBx.Text = LenToString(kmShow.dOffZigZagX, 3)
-      StepXTxBx.Text = LenToString( kmShow.dStepX, 3)
+      StepXTxBx.Text = LenToString(kmShow.dStepX, 3)
+      RadiusXTxBx.Text = LenToString(kmShow.dRadiusX, 3)
+      DistanceXTxBx.Text = LenToString(kmShow.dDistanceX, 3)
       ZigZagYTxBx.Text = kmShow.nZigZagY.ToString()
       OffZigZagYTxBx.Text = LenToString(kmShow.dOffZigZagY, 3)
-      StepYTxBx.Text = LenToString( kmShow.dStepY, 3)
-      LiLenTxBx.Text = LenToString( kmShow.dLiLen, 3)
-      LiHeightTxBx.Text = LenToString( kmShow.dLiHeight, 3)
-      LiLoadTxBx.Text = LenToString( kmShow.dLiLoad, 3)
+      StepYTxBx.Text = LenToString(kmShow.dStepY, 3)
+      RadiusYTxBx.Text = LenToString(kmShow.dRadiusY, 3)
+      DistanceYTxBx.Text = LenToString(kmShow.dDistanceY, 3)
+      SpiralTxBx.Text = kmShow.nSpiral.ToString()
+      StepSpiralTxBx.Text = LenToString(kmShow.dStepSpiral, 3)
+      OffSpiralTxBx.Text = LenToString(kmShow.dOffSpiral, 3)
+      RadiusSpiralTxBx.Text = LenToString(kmShow.dRadiusSpiral, 3)
+      DistanceSpiralTxBx.Text = LenToString(kmShow.dDistanceSpiral, 3)
+      LiLenTxBx.Text = LenToString(kmShow.dLiLen, 3)
+      LiHeightTxBx.Text = LenToString(kmShow.dLiHeight, 3)
+      LiLoadTxBx.Text = LenToString(kmShow.dLiLoad, 3)
    End Sub
 
    Private Sub KitMachsLstBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles KitMachsLstBx.SelectionChanged
       Dim SelectedKitMach As KitMach = KitMachsLstBx.SelectedItem
       If Not IsNothing(SelectedKitMach) Then
          ' visualizzo i parametri relativi al KitMach selezionato
-         ShowKitMach( SelectedKitMach)
+         ShowKitMach(SelectedKitMach)
       End If
    End Sub
 
@@ -520,14 +542,16 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub OffContourTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffContourTxBx.EgtClosed
-      Dim nTemp As Integer = 0
+      Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
-         nTemp = OffContourTxBx.Text
-         KitMachsLstBx.SelectedItem.dOffsetCnt = nTemp
-         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffsetCnt = nTemp
+         StringToLen(OffContourTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffsetCnt = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffsetCnt = dTemp
       End If
    End Sub
 
+#Region "ZigZag X"
+
    Private Sub ZigZagXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ZigZagXTxBx.EgtClosed
       Dim nTemp As Integer = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
@@ -538,11 +562,11 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub OffZigZagXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffZigZagXTxBx.EgtClosed
-      Dim nTemp As Integer = 0
+      Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
-         nTemp = OffZigZagXTxBx.Text
-         KitMachsLstBx.SelectedItem.dOffZigZagX = nTemp
-         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagX = nTemp
+         StringToLen(OffZigZagXTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffZigZagX = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagX = dTemp
       End If
    End Sub
 
@@ -555,6 +579,28 @@ Public Class PolishingsPageUC
       End If
    End Sub
 
+   Private Sub RadiusXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RadiusXTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(RadiusXTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dRadiusX = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dRadiusX = dTemp
+      End If
+   End Sub
+
+   Private Sub DistanceXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DistanceXTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(DistanceXTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dDistanceX = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dDistanceX = dTemp
+      End If
+   End Sub
+
+#End Region  ' ZigZag X
+
+#Region "ZizZag Y"
+
    Private Sub ZigZagYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ZigZagYTxBx.EgtClosed
       Dim nTemp As Integer = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
@@ -565,11 +611,11 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub OffZigZagYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffZigZagYTxBx.EgtClosed
-      Dim nTemp As Integer = 0
+      Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
-         nTemp = OffZigZagYTxBx.Text
-         KitMachsLstBx.SelectedItem.dOffZigZagY = nTemp
-         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagY = nTemp
+         StringToLen(OffZigZagYTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffZigZagY = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagY = dTemp
       End If
    End Sub
 
@@ -582,6 +628,75 @@ Public Class PolishingsPageUC
       End If
    End Sub
 
+   Private Sub RadiusYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RadiusYTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(RadiusYTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dRadiusY = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dRadiusY = dTemp
+      End If
+   End Sub
+
+   Private Sub DistanceYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DistanceYTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(DistanceYTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dDistanceY = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dDistanceY = dTemp
+      End If
+   End Sub
+
+#End Region    ' ZigZagY
+
+#Region "Spirale"
+
+   Private Sub SpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles SpiralTxBx.EgtClosed
+      Dim nTemp As Integer = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         nTemp = SpiralTxBx.Text
+         KitMachsLstBx.SelectedItem.nSpiral = nTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).nSpiral = nTemp
+      End If
+   End Sub
+
+   Private Sub OffSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(OffSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffSpiral = dTemp
+      End If
+   End Sub
+
+   Private Sub StepSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles StepSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(StepSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dStepSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dStepSpiral = dTemp
+      End If
+   End Sub
+
+   Private Sub RadiusSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RadiusSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(RadiusSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dRadiusSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dRadiusSpiral = dTemp
+      End If
+   End Sub
+
+   Private Sub DistanceSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DistanceSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(DistanceSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dDistanceSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dDistanceSpiral = dTemp
+      End If
+   End Sub
+
+#End Region  ' Spirale
+
    Private Sub LiLenTxBx_EgtClosed(sender As Object, e As EventArgs) Handles LiLenTxBx.EgtClosed
       Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
@@ -616,11 +731,11 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub ToolCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs)
-      If Not IsNothing( KitMachsLstBx.SelectedItem) Then
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
          m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).SelTool = KitMachsLstBx.SelectedItem.SelTool
-         If KitMachsLstBx.SelectedItem.SelTool >= 0 then
-            KitMachsLstBx.SelectedItem.sToolName = m_ToolList( KitMachsLstBx.SelectedItem.SelTool)
-            KitMachsLstBx.SelectedItem.sToolUUID = m_ToolUuidList( KitMachsLstBx.SelectedItem.SelTool)
+         If KitMachsLstBx.SelectedItem.SelTool >= 0 Then
+            KitMachsLstBx.SelectedItem.sToolName = m_ToolList(KitMachsLstBx.SelectedItem.SelTool)
+            KitMachsLstBx.SelectedItem.sToolUUID = m_ToolUuidList(KitMachsLstBx.SelectedItem.SelTool)
          Else
             KitMachsLstBx.SelectedItem.sToolName = "---"
             KitMachsLstBx.SelectedItem.sToolUUID = "---"
@@ -630,143 +745,176 @@ Public Class PolishingsPageUC
       End If
    End Sub
 
-   Private Function ReadKitName( nKitIndex As Integer) As String
+   Private Function ReadKitName(nKitIndex As Integer) As String
       ' Leggo il nome del kit
       Dim sKey As String = K_KIT & nKitIndex.ToString("D2")
       Dim sName As String = ""
-      GetPrivateProfileString( S_HEADER, sKey, "", sName, m_sKitFile)
+      GetPrivateProfileString(S_HEADER, sKey, "", sName, m_sKitFile)
       Return sName
    End Function
-   
-   Private Function ReadKit( nKitIndex As Integer, removeFlag As Boolean, ByRef Kit As Kit) As Boolean
+
+   Private Function ReadKit(nKitIndex As Integer, removeFlag As Boolean, ByRef Kit As Kit) As Boolean
       ' Leggo il nome del kit
-      Dim sName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sName) Then Return False
+      Dim sName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sName) Then Return False
       ' Creo il kit
-      Kit = New Kit( If( removeFlag, nKitIndex - 1, nKitIndex), sName)
+      Kit = New Kit(If(removeFlag, nKitIndex - 1, nKitIndex), sName)
       ' Leggo le sue lavorazioni
       For nkitMachIndex As Integer = 1 To 100
          Dim kmItem As KitMach = Nothing
-         if ReadKitMach( sName, nkitMachIndex, kmItem) Then
-            Kit.AddKitMach( kmItem)
+         If ReadKitMach(sName, nkitMachIndex, kmItem) Then
+            Kit.AddKitMach(kmItem)
          Else
             Exit For
          End If
       Next
       ' Se non sono state trovate lavorazioni, ne aggiungo una standard
       If Kit.KitMachList.Count() = 0 Then
-         Kit.AddKitMach( New KitMach( 1))
+         Kit.AddKitMach(New KitMach(1))
       End If
       Return True
    End Function
 
-   Private Function ReadKitMach( sKitName As String, nKitMachIndex As Integer, ByRef kmItem As KitMach) As Boolean
+   Private Function ReadKitMach(sKitName As String, nKitMachIndex As Integer, ByRef kmItem As KitMach) As Boolean
       ' Verifico esistenza lavorazione del kit
       Dim sSect As String = S_KIT & "." & sKitName
-      Dim sKeyInd As String = nkitMachIndex.ToString("D2") & "."
+      Dim sKeyInd As String = nKitMachIndex.ToString("D2") & "."
       Dim sName As String = ""
-      If GetPrivateProfileString( sSect, sKeyInd & K_TOOLNAME, "", sName, m_sKitFile) = 0 Then Return False
+      If GetPrivateProfileString(sSect, sKeyInd & K_TOOLNAME, "", sName, m_sKitFile) = 0 Then Return False
       ' Lettura completa
       kmItem = New KitMach
       kmItem.sToolName = sName
-      kmItem.nId = nkitMachIndex
-      GetPrivateProfileString( sSect, sKeyInd & K_TOOL, "", kmItem.sToolUUID, m_sKitFile)
-      kmItem.bActive = ( GetPrivateProfileInt( sSect, sKeyInd & K_ACTIVE, 0, m_sKitFile) = 1)
+      kmItem.nId = nKitMachIndex
+      GetPrivateProfileString(sSect, sKeyInd & K_TOOL, "", kmItem.sToolUUID, m_sKitFile)
+      kmItem.bActive = (GetPrivateProfileInt(sSect, sKeyInd & K_ACTIVE, 0, m_sKitFile) = 1)
       kmItem.nContour = GetPrivateProfileInt(sSect, sKeyInd & K_CONTOUR, 0, m_sKitFile)
-      kmItem.dOffsetCnt = GetPrivateProfileInt(sSect, sKeyInd & K_OFFSETCNT, 0, m_sKitFile)
+      kmItem.dOffsetCnt = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFSETCNT, 0, m_sKitFile)
       kmItem.nZigZagX = GetPrivateProfileInt(sSect, sKeyInd & K_ZIGZAGX, 0, m_sKitFile)
-      kmItem.dOffZigZagX = GetPrivateProfileInt(sSect, sKeyInd & K_OFFZIGZAGX, 0, m_sKitFile)
+      kmItem.dOffZigZagX = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFZIGZAGX, 0, m_sKitFile)
       kmItem.dStepX = GetPrivateProfileDouble(sSect, sKeyInd & K_STEPX, 0, m_sKitFile)
+      kmItem.dRadiusX = GetPrivateProfileDouble(sSect, sKeyInd & K_RADIUSX, 0, m_sKitFile)
+      kmItem.dDistanceX = GetPrivateProfileDouble(sSect, sKeyInd & K_DISTANCEX, 0, m_sKitFile)
       kmItem.nZigZagY = GetPrivateProfileInt(sSect, sKeyInd & K_ZIGZAGY, 0, m_sKitFile)
-      kmItem.dOffZigZagY = GetPrivateProfileInt(sSect, sKeyInd & K_OFFZIGZAGY, 0, m_sKitFile)
-      kmItem.dStepY = GetPrivateProfileDouble( sSect, sKeyInd & K_STEPY, 0, m_sKitFile)
-      kmItem.dLiLen = GetPrivateProfileDouble( sSect, sKeyInd & K_LILEN, 0, m_sKitFile)
-      kmItem.dLiHeight = GetPrivateProfileDouble( sSect, sKeyInd & K_LIHEIGHT, 0, m_sKitFile)
-      kmItem.dLiLoad = GetPrivateProfileDouble( sSect, sKeyInd & K_LILOAD, 0, m_sKitFile)
+      kmItem.dOffZigZagY = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFZIGZAGY, 0, m_sKitFile)
+      kmItem.dStepY = GetPrivateProfileDouble(sSect, sKeyInd & K_STEPY, 0, m_sKitFile)
+      kmItem.dRadiusY = GetPrivateProfileDouble(sSect, sKeyInd & K_RADIUSY, 0, m_sKitFile)
+      kmItem.dDistanceY = GetPrivateProfileDouble(sSect, sKeyInd & K_DISTANCEY, 0, m_sKitFile)
+
+      kmItem.nSpiral = GetPrivateProfileInt(sSect, sKeyInd & K_SPIRAL, 0, m_sKitFile)
+      kmItem.dOffSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFSPIRAL, 0, m_sKitFile)
+      kmItem.dStepSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_STEPSPIRAL, 0, m_sKitFile)
+      kmItem.dRadiusSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_RADIUSSPIRAL, 0, m_sKitFile)
+      kmItem.dDistanceSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_DISTANCESPIRAL, 0, m_sKitFile)
+
+      kmItem.dLiLen = GetPrivateProfileDouble(sSect, sKeyInd & K_LILEN, 0, m_sKitFile)
+      kmItem.dLiHeight = GetPrivateProfileDouble(sSect, sKeyInd & K_LIHEIGHT, 0, m_sKitFile)
+      kmItem.dLiLoad = GetPrivateProfileDouble(sSect, sKeyInd & K_LILOAD, 0, m_sKitFile)
       Return True
    End Function
 
-   Friend Function WriteKitName( nKitIndex As Integer, sKitName As String) As Boolean
+   Friend Function WriteKitName(nKitIndex As Integer, sKitName As String) As Boolean
       Dim sKey As String = K_KIT & nKitIndex.ToString("D2")
-      Return WritePrivateProfileString( S_HEADER, sKey, sKitName, m_sKitFile)
+      Return WritePrivateProfileString(S_HEADER, sKey, sKitName, m_sKitFile)
    End Function
 
-   Private Function WriteKitMach( nKitIndex As Integer, nKitMachIndex As Integer, kmItem As KitMach) As Boolean
+   Private Function WriteKitMach(nKitIndex As Integer, nKitMachIndex As Integer, kmItem As KitMach) As Boolean
       ' Leggo il nome del kit
-      Dim sKitName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sKitName) Then Return False
+      Dim sKitName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sKitName) Then Return False
       ' Sezione
       Dim sSect As String = S_KIT & "." & sKitName
       ' Indice
       Dim sKeyInd As String = nKitMachIndex.ToString("D2") & "."
       ' Scrivo i dati della lavorazione
-      If Not IsNothing( kmItem) Then
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOL, kmItem.sToolUUID, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOLNAME, kmItem.sToolName, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_ACTIVE, If( kmItem.bActive, "1", "0"), m_sKitFile)
+      If Not IsNothing(kmItem) Then
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOL, kmItem.sToolUUID, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOLNAME, kmItem.sToolName, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_ACTIVE, If(kmItem.bActive, "1", "0"), m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_CONTOUR, kmItem.nContour.ToString(), m_sKitFile)
-         WritePrivateProfileString(sSect, sKeyInd & K_OFFSETCNT, kmItem.dOffsetCnt.ToString(), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFSETCNT, DoubleToString(kmItem.dOffsetCnt, 3), m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGX, kmItem.nZigZagX.ToString(), m_sKitFile)
-         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGX, kmItem.dOffZigZagX.ToString(), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPX, DoubleToString( kmItem.dStepX, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGX, DoubleToString(kmItem.dOffZigZagX.ToString, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPX, DoubleToString(kmItem.dStepX, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSX, DoubleToString(kmItem.dRadiusX, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEX, DoubleToString(kmItem.dDistanceX, 3), m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGY, kmItem.nZigZagY.ToString(), m_sKitFile)
-         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGY, kmItem.dOffZigZagY.ToString(), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPY, DoubleToString( kmItem.dStepY, 3), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILEN, DoubleToString( kmItem.dLiLen, 3), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LIHEIGHT, DoubleToString( kmItem.dLiHeight, 3), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILOAD, DoubleToString( kmItem.dLiLoad, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGY, DoubleToString(kmItem.dOffZigZagY, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPY, DoubleToString(kmItem.dStepY, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSY, DoubleToString(kmItem.dRadiusY, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEY, DoubleToString(kmItem.dDistanceY, 3), m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_SPIRAL, kmItem.nSpiral.ToString(), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFSPIRAL, DoubleToString(kmItem.dOffSpiral.ToString, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPSPIRAL, DoubleToString(kmItem.dStepSpiral, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSSPIRAL, DoubleToString(kmItem.dRadiusSpiral, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCESPIRAL, DoubleToString(kmItem.dDistanceSpiral, 3), m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_LILEN, DoubleToString(kmItem.dLiLen, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LIHEIGHT, DoubleToString(kmItem.dLiHeight, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LILOAD, DoubleToString(kmItem.dLiLoad, 3), m_sKitFile)
       Else
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOL, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOLNAME, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_ACTIVE, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOLNAME, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_ACTIVE, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_CONTOUR, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_OFFSETCNT, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGX, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGX, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPX, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPX, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSX, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEX, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGY, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGY, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPY, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILEN, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LIHEIGHT, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILOAD, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPY, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSY, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEY, Nothing, m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_SPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFSPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPSPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSSPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCESPIRAL, Nothing, m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_LILEN, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LIHEIGHT, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LILOAD, Nothing, m_sKitFile)
       End If
       Return True
    End Function
 
-   Private Function EraseKit( nKitIndex As Integer) As Boolean
+   Private Function EraseKit(nKitIndex As Integer) As Boolean
       ' Leggo il nome del kit
-      Dim sKitName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sKitName) Then Return False
+      Dim sKitName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sKitName) Then Return False
       ' Lo elimino dalla lista dei kit scalando tutti di una posizione e eliminando l'ultimo
       Dim nNextKitIndex As Integer = nKitIndex + 1
-      Dim sNextKitName As String = ReadKitName( nNextKitIndex) 
-      while Not String.IsNullOrWhiteSpace( sNextKitName)
-         WriteKitName( nNextKitIndex - 1, sNextKitName)
+      Dim sNextKitName As String = ReadKitName(nNextKitIndex)
+      While Not String.IsNullOrWhiteSpace(sNextKitName)
+         WriteKitName(nNextKitIndex - 1, sNextKitName)
          nNextKitIndex += 1
-         sNextKitName = ReadKitName( nNextKitIndex) 
+         sNextKitName = ReadKitName(nNextKitIndex)
       End While
-      WriteKitName( nNextKitIndex - 1, Nothing)
+      WriteKitName(nNextKitIndex - 1, Nothing)
       ' Sezione
       Dim sSect As String = S_KIT & "." & sKitName
       ' Cancello tutte le lavorazioni del kit
-      WritePrivateProfileString( sSect, Nothing, Nothing, m_sKitFile)
+      WritePrivateProfileString(sSect, Nothing, Nothing, m_sKitFile)
       Return True
    End Function
 
-   Private Function EraseKitMach( nKitIndex As Integer, nKitMachIndex As Integer) As Boolean
+   Private Function EraseKitMach(nKitIndex As Integer, nKitMachIndex As Integer) As Boolean
       ' Leggo il nome del kit
-      Dim sKitName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sKitName) Then Return False
+      Dim sKitName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sKitName) Then Return False
       ' Lo elimino dali KitMach scalando tutti di una posizione e eliminando l'ultimo
       Dim kmCurr As KitMach = Nothing
       Dim nNextKitMachIndex As Integer = nKitMachIndex + 1
-      While ReadKitMach( sKitName, nNextKitMachIndex, kmCurr)
+      While ReadKitMach(sKitName, nNextKitMachIndex, kmCurr)
          kmCurr.nId = nNextKitMachIndex - 1
-         WriteKitMach( nKitIndex, nNextKitMachIndex - 1, kmCurr)
+         WriteKitMach(nKitIndex, nNextKitMachIndex - 1, kmCurr)
          nNextKitMachIndex += 1
       End While
-      WriteKitMach( nKitIndex, nNextKitMachIndex - 1, Nothing)
+      WriteKitMach(nKitIndex, nNextKitMachIndex - 1, Nothing)
       Return True
    End Function
 
@@ -804,7 +952,7 @@ Class Kit
       Get
          Return m_nId
       End Get
-      Set( value As Integer) 
+      Set(value As Integer)
          m_nId = value
       End Set
    End Property
@@ -824,7 +972,7 @@ Class Kit
       End Set
    End Property
 
-   Sub New( nId As Integer, sName As String)
+   Sub New(nId As Integer, sName As String)
       m_nId = nId
       m_sName = sName
 
@@ -832,21 +980,21 @@ Class Kit
 
    End Sub
 
-   Sub New( nId As Integer, sName As String, kitSou As Kit)
+   Sub New(nId As Integer, sName As String, kitSou As Kit)
       m_nId = nId
       m_sName = sName
 
       m_KitMachList = New List(Of KitMach)
 
-      If IsNothing( kitSou) Then Return
+      If IsNothing(kitSou) Then Return
 
       For Each kmItem As KitMach In kitSou.m_KitMachList
-         AddKitMach( kmItem)
+         AddKitMach(kmItem)
       Next
 
    End Sub
 
-   Sub AddKitMach( kitMachItem As KitMach)
+   Sub AddKitMach(kitMachItem As KitMach)
       m_KitMachList.Add(kitMachItem)
    End Sub
 
@@ -862,15 +1010,29 @@ Class KitMach
    Private m_sToolName As String
    Private m_SelTool As Integer
    Friend Shared m_ToolList As List(Of String)
+
    Private m_bActive As Boolean
    Private m_nContour As Integer
    Private m_dOffsetCnt As Double
+
    Private m_nZigZagX As Integer
    Private m_dStepX As Double
    Private m_dOffZigZagX As Double
+   Private m_dRadiusX As Double
+   Private m_dDistanceX As Double
+
    Private m_nZigZagY As Integer
    Private m_dStepY As Double
    Private m_dOffZigZagY As Double
+   Private m_dRadiusY As Double
+   Private m_dDistanceY As Double
+
+   Private m_nSpiral As Integer
+   Private m_dOffSpiral As Double
+   Private m_dStepSpiral As Double
+   Private m_dRadiusSpiral As Double
+   Private m_dDistanceSpiral As Double
+
    Private m_dLiLen As Double
    Private m_dLiHeight As Double
    Private m_dLiLoad As Double
@@ -958,6 +1120,8 @@ Class KitMach
       End Set
    End Property
 
+#Region "Contorno"
+
    Public m_IsModifiedActive As Boolean = False
    Public Property bActive As Boolean
       Get
@@ -985,11 +1149,11 @@ Class KitMach
    End Property
 
    Public m_IsModifiedOffCnt As Boolean = False
-   Public Property dOffsetCnt As Integer
+   Public Property dOffsetCnt As Double
       Get
          Return m_dOffsetCnt
       End Get
-      Set(value As Integer)
+      Set(value As Double)
          If value <> m_dOffsetCnt Then
             m_dOffsetCnt = value
             m_IsModifiedOffCnt = True
@@ -997,6 +1161,10 @@ Class KitMach
       End Set
    End Property
 
+#End Region    ' Contorno
+
+#Region "ZigZag X"
+
    Public m_IsModifiedZigZagX As Boolean = False
    Public Property nZigZagX As Integer
       Get
@@ -1011,11 +1179,11 @@ Class KitMach
    End Property
 
    Public m_IsModifiedOffZigZagX As Boolean = False
-   Public Property dOffZigZagX As Integer
+   Public Property dOffZigZagX As Double
       Get
          Return m_dOffZigZagX
       End Get
-      Set(value As Integer)
+      Set(value As Double)
          If value <> m_dOffZigZagX Then
             m_dOffZigZagX = value
             m_IsModifiedOffZigZagX = True
@@ -1036,6 +1204,36 @@ Class KitMach
       End Set
    End Property
 
+   Public m_IsModifiedRadiusX As Boolean = False
+   Public Property dRadiusX As Double
+      Get
+         Return m_dRadiusX
+      End Get
+      Set(value As Double)
+         If value <> m_dRadiusX Then
+            m_dRadiusX = value
+            m_IsModifiedRadiusX = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedDistanceX As Boolean = False
+   Public Property dDistanceX As Double
+      Get
+         Return m_dDistanceX
+      End Get
+      Set(value As Double)
+         If value <> m_dDistanceX Then
+            m_dDistanceX = value
+            m_IsModifiedDistanceX = True
+         End If
+      End Set
+   End Property
+
+#End Region    ' ZigZag X
+
+#Region "ZigZag Y"
+
    Public m_IsModifiedZigZagY As Boolean = False
    Public Property nZigZagY As Integer
       Get
@@ -1050,11 +1248,11 @@ Class KitMach
    End Property
 
    Public m_IsModifiedOffZigZagY As Boolean = False
-   Public Property dOffZigZagY As Integer
+   Public Property dOffZigZagY As Double
       Get
          Return m_dOffZigZagY
       End Get
-      Set(value As Integer)
+      Set(value As Double)
          If value <> m_dOffZigZagY Then
             m_dOffZigZagY = value
             m_IsModifiedOffZigZagY = True
@@ -1075,6 +1273,105 @@ Class KitMach
       End Set
    End Property
 
+   Public m_IsModifiedRadiusY As Boolean = False
+   Public Property dRadiusY As Double
+      Get
+         Return m_dRadiusY
+      End Get
+      Set(value As Double)
+         If value <> m_dRadiusY Then
+            m_dRadiusY = value
+            m_IsModifiedRadiusY = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedDistanceY As Boolean = False
+   Public Property dDistanceY As Double
+      Get
+         Return m_dDistanceY
+      End Get
+      Set(value As Double)
+         If value <> m_dDistanceY Then
+            m_dDistanceY = value
+            m_IsModifiedDistanceY = True
+         End If
+      End Set
+   End Property
+
+#End Region    ' ZigZag Y
+
+#Region "Spirale"
+
+   Public m_IsModifiedSpiral As Boolean = False
+   Public Property nSpiral As Integer
+      Get
+         Return m_nSpiral
+      End Get
+      Set(value As Integer)
+         If value <> m_nSpiral Then
+            m_nSpiral = value
+            m_IsModifiedSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedOffSpiral As Boolean = False
+   Public Property dOffSpiral As Double
+      Get
+         Return m_dOffSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dOffSpiral Then
+            m_dOffSpiral = value
+            m_IsModifiedOffSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedStepSpiral As Boolean = False
+   Public Property dStepSpiral As Double
+      Get
+         Return m_dStepSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dStepSpiral Then
+            m_dStepSpiral = value
+            m_IsModifiedStepSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedRadiusSpiral As Boolean = False
+   Public Property dRadiusSpiral As Double
+      Get
+         Return m_dRadiusSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dRadiusSpiral Then
+            m_dRadiusSpiral = value
+            m_IsModifiedRadiusSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedDistanceSpiral As Boolean = False
+   Public Property dDistanceSpiral As Double
+      Get
+         Return m_dDistanceSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dDistanceSpiral Then
+            m_dDistanceSpiral = value
+            m_IsModifiedDistanceSpiral = True
+         End If
+      End Set
+   End Property
+
+#End Region    ' Spirale
+
+#Region "Parametri lavorazione"
+
    Public m_IsModifiedLiLen As Boolean = False
    Public Property dLiLen As Double
       Get
@@ -1114,6 +1411,8 @@ Class KitMach
       End Set
    End Property
 
+#End Region    ' Parametri lavorazione
+
    Sub New()
       m_nId = 0
       m_SelTool = 0
@@ -1125,15 +1424,24 @@ Class KitMach
       m_nZigZagX = 0
       m_dOffZigZagX = 0
       m_dStepX = 0
+      m_dRadiusX = 0
+      m_dDistanceX = 0
       m_nZigZagY = 0
       m_dOffZigZagY = 0
       m_dStepY = 0
+      m_dRadiusY = 0
+      m_dDistanceY = 0
+      m_nSpiral = 0
+      m_dOffSpiral = 0
+      m_dStepSpiral = 0
+      m_dRadiusSpiral = 0
+      m_dDistanceSpiral = 0
       m_dLiLen = 0
       m_dLiHeight = 0
       m_dLiLoad = 0
    End Sub
 
-   Sub New( nId As Integer)
+   Sub New(nId As Integer)
       m_nId = nId
       m_SelTool = 0
       m_sToolUUID = "---"
@@ -1144,17 +1452,26 @@ Class KitMach
       m_nZigZagX = 0
       m_dOffZigZagX = 0
       m_dStepX = 0
+      m_dRadiusX = 0
+      m_dDistanceX = 0
       m_nZigZagY = 0
       m_dOffZigZagY = 0
       m_dStepY = 0
+      m_dRadiusY = 0
+      m_dDistanceY = 0
+      m_nSpiral = 0
+      m_dOffSpiral = 0
+      m_dStepSpiral = 0
+      m_dRadiusSpiral = 0
+      m_dDistanceSpiral = 0
       m_dLiLen = 0
       m_dLiHeight = 0
       m_dLiLoad = 0
    End Sub
 
-   Sub New( kmSou As KitMach) 
+   Sub New(kmSou As KitMach)
       m_nId = kmSou.nId
-      m_SelTool = kmSou.selTool
+      m_SelTool = kmSou.SelTool
       m_sToolUUID = kmSou.sToolUUID
       m_sToolName = kmSou.sToolName
       m_bActive = kmSou.bActive
@@ -1163,9 +1480,18 @@ Class KitMach
       m_nZigZagX = kmSou.nZigZagX
       m_dOffZigZagX = kmSou.dOffZigZagX
       m_dStepX = kmSou.dStepX
+      m_dRadiusX = kmSou.dRadiusX
+      m_dDistanceX = kmSou.dDistanceX
       m_nZigZagY = kmSou.nZigZagY
       m_dOffZigZagY = kmSou.dOffZigZagY
       m_dStepY = kmSou.dStepY
+      m_dRadiusY = kmSou.dRadiusY
+      m_dDistanceY = kmSou.dDistanceY
+      m_nSpiral = kmSou.nSpiral
+      m_dOffSpiral = kmSou.dOffSpiral
+      m_dStepSpiral = kmSou.dStepSpiral
+      m_dRadiusSpiral = kmSou.dRadiusSpiral
+      m_dDistanceSpiral = kmSou.dDistanceSpiral
       m_dLiLen = kmSou.dLiLen
       m_dLiHeight = kmSou.dLiHeight
       m_dLiLoad = kmSou.m_dLiLoad

Machine/StatisticsPageUC.xaml.vb

@@ -36,7 +36,7 @@ Public Class StatisticsPageUC
       DayTxBl.Text = sDay
       ' Leggo il numero della settimana
       Dim nWeek As Integer = GetPrivateProfileInt(S_STATDATA, K_SD_WEEK, -1, m_MainWindow.GetIniFile())
-      WeekTxBl.Text = ( nWeek + 1).ToString()
+      WeekTxBl.Text = (nWeek).ToString()
 
       ' Leggo area pezzi del giorno
       Dim dDayParts As Double = GetPrivateProfileDouble(S_STATDATA, K_SD_DAYPARTS, 0, m_MainWindow.GetIniFile())

Machine/ToolChangerPosUC.xaml

@@ -9,7 +9,7 @@
    <!-- Definizione del ToolHolderUc -->
    <Grid>
       <Image Source="/Resources/ToolChangerPos.png"/>
-      <ToggleButton Name="Tool" Width="50" Height="50" Margin="22,40,26,8" Background="#7FB4B4B4">
+      <ToggleButton Name="Tool" Width="50" Height="50" Margin="62,10,16,10" Background="#7FB4B4B4">
          <ToggleButton.Template>
             <ControlTemplate TargetType="{x:Type ToggleButton}">
                <Grid>
@@ -25,7 +25,7 @@
 
          </ToggleButton.Template>
       </ToggleButton>
-      <TextBlock Name="PositionNameTxBl" Height="22" Width="68" FontSize="16" Margin="12,16,41,61"/>
+      <TextBlock Name="PositionNameTxBl" Height="22" Width="50" FontSize="16" Margin="20,40,70,53"/>
 
    </Grid>
 </UserControl>

Machine/ToolsDbPageUC.xaml

@@ -281,12 +281,12 @@
                   </Grid.ColumnDefinitions>
 
                   <TextBlock Name="SpeedTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1"
+                  <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1" IsLength="False"
                      Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                   <TextBlock Name="MaxSpeedTxBl" Grid.Column="2"
                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="MaxSpeedTxBx" Grid.Column="3"
+                  <EgtWPFLib:EgtTextBox Name="MaxSpeedTxBx" Grid.Column="3" IsLength="False"
                      Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                </Grid>
@@ -384,7 +384,7 @@
 
                   <TextBlock Name="MaxAbsorptionTxBl" Grid.Column="0"
                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="1" ScrollViewer.VerticalScrollBarVisibility="Disabled" TextWrapping="Wrap"/>
-                  <EgtWPFLib:EgtTextBox Name="MaxAbsorptionTxBx" Grid.Column="1" 
+                  <EgtWPFLib:EgtTextBox Name="MaxAbsorptionTxBx" Grid.Column="1" IsLength="False"
                      Style="{DynamicResource OmagCut_LeftCalculatorTextBoxInBorder}" />
 
                   <TextBlock Name="MinFeedTxBl" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
@@ -434,13 +434,16 @@
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="11*"/>
+               <ColumnDefinition Width="10*"/>
+               <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
             <Button Name="NewBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
             <Button Name="SaveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}"/>
             <Button Name="RemoveBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
+            <Button Name="ExportBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
+            <Button Name="ImportBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowGradientYellowTextButton}" Padding="0"/>
 
             </Grid>
 

Machine/ToolsDbPageUC.xaml.vb

@@ -3,6 +3,7 @@ Imports OmagCUT.TreeViewItem
 Imports System.ComponentModel
 Imports EgtUILib
 Imports EgtWPFLib
+Imports EgtWPFLib5
 
 Public Class ToolsDbPageUC
 
@@ -16,6 +17,8 @@ Public Class ToolsDbPageUC
    Dim ToolsList As New ObservableCollection(Of CathegoryItem)
    ' Proprietà
    Private m_bFirst As Boolean = True
+   ' Flag nuova gestione parametri lama in disegno
+   Private m_bNewSawbladeMaker As Boolean = False
    ' Stringa identificativa variabile geometrica in modifica
    Private m_sCurrVar As String = String.Empty
    ' Parametri dell'utensile corrente
@@ -53,6 +56,8 @@ Public Class ToolsDbPageUC
       NewBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 15)
       SaveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 17)
       RemoveBtn.Content = EgtMsg(MSG_MACHINEPAGEUC + 18)
+      ExportBtn.Content = EgtMsg(91126)
+      ImportBtn.Content = EgtMsg(91127)
 
       NameTxBl.Text = EgtMsg(MSG_TOOLSDBPAGEUC + 1)
       TCPosTxBl.Text = EgtMsg(MSG_TOOLSDBPAGEUC + 2)
@@ -170,6 +175,10 @@ Public Class ToolsDbPageUC
          If Not m_CurrMachine.bShowHeadExit Then
             MoveParam()
          End If
+         ' Verifico se macchina con nuovo SawbladeMaker
+         Dim sSawBladeMaker As String = ""
+         GetPrivateProfileString(S_TOOLS, K_SAWBLADEMAKER, "", sSawBladeMaker, m_MainWindow.GetIniFile())
+         m_bNewSawbladeMaker = String.Compare(sSawBladeMaker, "MakeStoneSawBlade.lua", True)
          m_bFirst = False
       Else
          EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
@@ -239,17 +248,17 @@ Public Class ToolsDbPageUC
             Next
             ' Determino il tipo di utensile
             Dim nType As Integer
-            EgtTdbGetCurrToolParam( MCH_TP.TYPE, nType)
+            EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
             ' Imposto testa e uscita
             ' Sempre lame su H1.1 e utensili foretto, fresa e mola da scasso su H1.2
-            If ( nType And MCH_TF.WATERJET) = 0 then
+            If (nType And MCH_TF.WATERJET) = 0 Then
                Dim bSaw As Boolean = ((nType And MCH_TF.SAWBLADE) <> 0)
-               EgtTdbSetCurrToolParam( MCH_TP.HEAD, "H1")
-               EgtTdbSetCurrToolParam( MCH_TP.EXIT_, If(bSaw, 1, 2))
-            ' Waterjet sempre su H2.1
+               EgtTdbSetCurrToolParam(MCH_TP.HEAD, "H1")
+               EgtTdbSetCurrToolParam(MCH_TP.EXIT_, If(bSaw, 1, 2))
+               ' Waterjet sempre su H2.1
             Else
-               EgtTdbSetCurrToolParam( MCH_TP.HEAD, "H2")
-               EgtTdbSetCurrToolParam( MCH_TP.EXIT_, 1)
+               EgtTdbSetCurrToolParam(MCH_TP.HEAD, "H2")
+               EgtTdbSetCurrToolParam(MCH_TP.EXIT_, 1)
             End If
             ' Per macchine senza ToolChanger, resetto la posizione su questo
             If m_CurrMachine.ShowToolChanger = 0 Then
@@ -317,8 +326,8 @@ Public Class ToolsDbPageUC
             EgtTdbGetCurrToolParam(MCH_TP.TYPE, CurrType)
             For Each ToolFamily As CathegoryItem In ToolsList
                If ToolFamily.nTType = CurrType Then
-                  Dim NewToolItem As New CustomItem( NewName, CurrType)
-                  ToolFamily.Items.Add( NewToolItem)
+                  Dim NewToolItem As New CustomItem(NewName, CurrType)
+                  ToolFamily.Items.Add(NewToolItem)
                   NewToolItem.IsSelected = True
                   GetToolParams()
                   m_OldItem = ToolTreeView.SelectedItem
@@ -354,15 +363,15 @@ Public Class ToolsDbPageUC
          Dim sItems() As String = sUserNotes.Split(";".ToCharArray)
          For i As Integer = 0 To sItems.Count() - 1
             If sItems(i).Contains("CODE=") Then
-               CodeTxBx.Text = sItems(i).Substring( 5)
+               CodeTxBx.Text = sItems(i).Substring(5)
             ElseIf sItems(i).Contains("SUPPL=") Then
-               SupplierTxBx.Text = sItems(i).Substring( 6)
+               SupplierTxBx.Text = sItems(i).Substring(6)
             ElseIf sItems(i).Contains("S/N=") Then
-               SerNbrTxBx.Text = sItems(i).Substring( 4)
+               SerNbrTxBx.Text = sItems(i).Substring(4)
             ElseIf sItems(i).Contains("END=") Then
                EndLifeChBx.IsChecked = True
-               m_sEndLife = sItems(i).Substring( 4)
-            ElseIf Not String.IsNullOrWhiteSpace(sItems(i))
+               m_sEndLife = sItems(i).Substring(4)
+            ElseIf Not String.IsNullOrWhiteSpace(sItems(i)) Then
                sToShow &= sItems(i) & ";"
             End If
          Next
@@ -383,7 +392,7 @@ Public Class ToolsDbPageUC
       sUserNotes &= "SUPPL=" & SupplierTxBx.Text & ";"
       sUserNotes &= "S/N=" & SerNbrTxBx.Text & ";"
       If EndLifeChBx.IsChecked Then
-         If String.IsNullOrWhiteSpace( m_sEndLife) Then
+         If String.IsNullOrWhiteSpace(m_sEndLife) Then
             m_sEndLife = My.Computer.Clock.LocalTime.ToString("dd.MM.yyyy HH:mm:ss")
          End If
          sUserNotes &= "END=" & m_sEndLife & ";"
@@ -479,18 +488,217 @@ Public Class ToolsDbPageUC
       End If
    End Sub
 
+   Private Sub ExportBtn_Click(Sender As Object, e As RoutedEventArgs) Handles ExportBtn.Click
+      ' contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+
+      ' creo lista utensili per esportazione
+      Dim ToolToExportList = New ObservableCollection(Of ImpExpToolFamily)
+      Dim Family As CathegoryItem
+      Dim Tool As CustomItem
+      For Each Family In ToolsList
+         Dim ImpExpToolFamily As New ImpExpToolFamily(Family.Name, Family.nTType)
+         ImpExpToolFamily.PictureString = "/Resources/ToolsTreeviewImages/Folder.png"
+         For Each Tool In Family.Items
+            Dim CurrTool = New ImpExpToolItem(Tool.Name, False)
+            ImpExpToolFamily.ToolList.Add(CurrTool)
+         Next
+         ToolToExportList.Add(ImpExpToolFamily)
+      Next
+
+      Dim ExportWndVM As New ImportExportToolWindowVM(ToolToExportList, True)
+      Dim ExportWnd As New ImportExportToolWD(Application.Current.MainWindow, ExportWndVM)
+
+      ExportWnd.ShowDialog()
+   End Sub
+
+   Private Sub ImportBtn_Click(Sender As Object, e As RoutedEventArgs) Handles ImportBtn.Click
+      ' contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' apro dialogo di scelta file
+      Dim ImportFileDlg As New Microsoft.Win32.OpenFileDialog() With {
+         .Title = EgtMsg(31161) & " " & EgtMsg(31163),
+         .DefaultExt = ".data",
+         .Filter = "Tools (.data)|*.data",
+         .CheckFileExists = True,
+         .ValidateNames = True
+      }
+      If ImportFileDlg.ShowDialog() <> True Then Return
+      Dim ImportFilePath As String = ImportFileDlg.FileName
+      ' recupero liste utensili da importare
+      Dim ImportFileToolNameList As String() = Nothing
+      Dim ImportFileToolFamilyList As Integer() = Nothing
+      If Not EgtTdbToBeImported(ImportFilePath, ImportFileToolNameList, ImportFileToolFamilyList) Then Return
+      ' li inserisco in lista per finestra di scelta
+      Dim ToolToImportList As New ObservableCollection(Of ImpExpToolFamily)
+      ' creo famiglie di utensili in base a quelle trovate in lista importata
+      For ToolIndex As Integer = 0 To ImportFileToolNameList.Count - 1
+         Dim ToolName As String = ImportFileToolNameList(ToolIndex)
+         Dim ToolFamily As Integer = ImportFileToolFamilyList(ToolIndex)
+         ToolFamily = ToolFamily And
+            (MCH_TF.DRILLBIT Or
+            MCH_TF.SAWBLADE Or
+            MCH_TF.MILL Or
+            MCH_TF.MORTISE Or
+            MCH_TF.CHISEL Or
+            MCH_TF.WATERJET Or
+            MCH_TF.COMPO)
+         Dim bFounded As Boolean = False
+         Dim ToolToImportFamily As ImpExpToolFamily
+         For Each ToolToImportFamily In ToolToImportList
+            If (ToolFamily = ToolToImportFamily.FamilyType) Then
+               ToolToImportFamily.ToolList.Add(New ImpExpToolItem(ToolName, AlreadyExist(ToolName)))
+               bFounded = True
+               Exit For
+            End If
+         Next
+         If Not bFounded Then
+            Dim NewFamily As New ImpExpToolFamily(GetToolFamilyName(ToolFamily), ToolFamily)
+            NewFamily.ToolList.Add(New ImpExpToolItem(ToolName, AlreadyExist(ToolName)))
+            ToolToImportList.Add(NewFamily)
+         End If
+      Next
+      Dim ImportWndVM As New ImportExportToolWindowVM(ToolToImportList, False, ImportFilePath, ImportFileToolNameList)
+      Dim ImportWnd As New ImportExportToolWD(Application.Current.MainWindow, ImportWndVM)
+
+      ImportWnd.ShowDialog()
+      ' Aggiungo all'albero visualizzato gli utensili appena importati
+      If ImportWnd.OkResult Then
+         LoadImportedMachineTools(ImportWndVM.vsImported)
+      End If
+   End Sub
+
+   Private Function AlreadyExist(ToolName As String) As Boolean
+      Dim ToolFamily As CathegoryItem
+      For Each ToolFamily In ToolsList
+         Dim ToolItem As CustomItem
+         For Each ToolItem In ToolFamily.Items
+            If ToolName = ToolItem.Name Then
+               Return True
+            End If
+         Next
+      Next
+      Return False
+   End Function
+
+   Private Function GetToolFamilyName(NewToolFamily As Integer) As String
+      Dim ToolFamily As CathegoryItem
+      For Each ToolFamily In ToolsList
+         If NewToolFamily = ToolFamily.nTType Then
+            Return ToolFamily.Name
+         End If
+      Next
+      Return ""
+   End Function
+
+   Private Sub LoadImportedMachineTools(vsImportedTools As String())
+      ' Leggo tutti gli utensili presenti nella Macchina (quindi anche quelli appena importati). 
+      Dim ActiveToolsFamilies() As ToolsFamily = MyReadToolFamilies(m_CurrMachine.sMachIniFile)
+      Dim ToolsFamilyIndex As Integer = 0
+      Dim ToolsFamilyItem As ToolsFamily
+      For Each ToolsFamilyItem In ActiveToolsFamilies
+         ' dalla lista che ho ricavato dalla libreria recupero gli utensili associati
+         Dim FamilyTreeView As New CathegoryItem(ToolsFamilyItem.Name, ToolsFamilyItem.Id)
+         Dim ToolFamilyItem = ToolsList.FirstOrDefault(Function(ToolFamily) ToolFamily.nTType = ToolsFamilyItem.Id)
+         If IsNothing(ToolFamilyItem) Then
+            ToolsList.Insert(ToolsFamilyIndex, FamilyTreeView)
+         Else
+            ' ricerco l'indice nella lista Tools
+
+         End If
+         Dim nType As Integer = 0
+         Dim ToolName As String = String.Empty
+         Dim ToolIndex As Integer = 0
+         'EgtSetCurrentContext(ToolScene.GetCtx())
+         EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+         If EgtTdbGetFirstTool(ToolsFamilyItem.Id, ToolName, nType) Then
+            Dim ToolItem = ToolsList(ToolsFamilyIndex).Items.FirstOrDefault(Function(Tool) Tool.Name = ToolName)
+            If IsNothing(ToolItem) Then
+               ' Se leggo un utensile non presente nella ToolsList visualizzata lo aggiungo ad essa. 
+               Dim NewToolName As New CustomItem(ToolName, nType)
+               ToolsList(ToolsFamilyIndex).Items.Insert(ToolIndex, NewToolName)
+               'NewToolName.IsSelected = True
+            ElseIf vsImportedTools.Contains(ToolName) Then
+               ' Se un utensile è presente nella ToolsList visualizzata ma nel contempo è nell'array vsImported 
+               ' vuol dire che è stato sovrascritto perciò lo rimuovo e lo riaggiungo alla ToolsList.
+               ToolsList(ToolsFamilyIndex).Items.Remove(ToolsList(ToolsFamilyIndex).Items.FirstOrDefault(Function(Tool) Tool.Name = ToolName))
+               Dim NewToolName As New CustomItem(ToolName, nType)
+               ToolsList(ToolsFamilyIndex).Items.Insert(ToolIndex, NewToolName)
+               'NewToolName.IsSelected = True
+            End If
+            ToolIndex += 1
+            While EgtTdbGetNextTool(ToolsFamilyItem.Id, ToolName, nType)
+               ToolItem = ToolsList(ToolsFamilyIndex).Items.FirstOrDefault(Function(Tool) Tool.Name = ToolName)
+               If IsNothing(ToolItem) Then
+                  ' Se leggo un utensile non presente nella ToolsList visualizzata lo aggiungo ad essa. 
+                  Dim NewToolName As New CustomItem(ToolName, nType)
+                  ToolsList(ToolsFamilyIndex).Items.Insert(ToolIndex, NewToolName)
+                  'NewToolName.IsSelected = True
+               ElseIf vsImportedTools.Contains(ToolName) Then
+                  ' Se un utensile è presente nella ToolsList visualizzata ma nel contempo è nell'array vsImported 
+                  ' vuol dire che è stato sovrascritto perciò lo rimuovo e lo riaggiungo alla ToolsList.
+                  ToolsList(ToolsFamilyIndex).Items.Remove(ToolsList(ToolsFamilyIndex).Items.FirstOrDefault(Function(Tool) Tool.Name = ToolName))
+                  Dim NewToolName As New CustomItem(ToolName, nType)
+                  ToolsList(ToolsFamilyIndex).Items.Insert(ToolIndex, NewToolName)
+                  'NewToolName.IsSelected = True
+               End If
+               ToolIndex += 1
+            End While
+         End If
+         ToolsFamilyIndex += 1
+      Next
+
+   End Sub
+
+   Public Function MyReadToolFamilies(sMachineIniPath As String) As ToolsFamily()
+      Dim ActiveToolsFamiliesList As New List(Of ToolsFamily)
+
+      ' Se il materiale lavorato è Marmo l'ordine di lettura e inserimento di Punta e Lama nelle famiglie di utensili attivi è invertito 
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_SAWBLADE, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.SAWBLADE, EgtMsg(31000 + 2)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_DRILLBIT, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.DRILLBIT, EgtMsg(31000 + 1)))
+      End If
+
+
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_MILL, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.MILL, EgtMsg(31000 + 3)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, "CupWheel", 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.MILL, EgtMsg(90754)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, "PolishingWheel", 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.MILL, EgtMsg(90756)))
+      End If
+
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_MORTISE, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.MORTISE, EgtMsg(31000 + 4)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_CHISEL, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.CHISEL, EgtMsg(31000 + 9)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_COMPO, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.COMPO, EgtMsg(31000 + 5)))
+      End If
+      If EgtUILib.GetPrivateProfileInt(S_TOOLS, K_WATERJET, 0, sMachineIniPath) <> 0 Then
+         ActiveToolsFamiliesList.Add(New ToolsFamily(MCH_TF.WATERJET, EgtMsg(31010)))
+      End If
+      Return ActiveToolsFamiliesList.ToArray
+   End Function
+
    Friend Sub InitializeToolGroup(bEnabled As Boolean, nTType As Integer, sFName As String)
       If Not bEnabled Then Return
       ' Inserisco categoria ed eventuali elementi
-      Dim ToolCathegory As New CathegoryItem( sFName, nTType)
+      Dim ToolCathegory As New CathegoryItem(sFName, nTType)
       Dim nType As Integer = 0
       Dim ToolName As String = String.Empty
-      Dim bFound As Boolean = EgtTdbGetFirstTool( nTType, ToolName, nType)
+      Dim bFound As Boolean = EgtTdbGetFirstTool(nTType, ToolName, nType)
       While bFound
-         If nType = nTType Then ToolCathegory.Items.Add( New CustomItem( ToolName, nType))
-         bFound = EgtTdbGetNextTool( nTType, ToolName, nType)
+         If nType = nTType Then ToolCathegory.Items.Add(New CustomItem(ToolName, nType))
+         bFound = EgtTdbGetNextTool(nTType, ToolName, nType)
       End While
-      ToolsList.Add( ToolCathegory)
+      ToolsList.Add(ToolCathegory)
    End Sub
 
    Private Sub GetToolParams()
@@ -545,7 +753,7 @@ Public Class ToolsDbPageUC
       HeadTxBx.Text = ToolString
       EgtTdbGetCurrToolParam(MCH_TP.EXIT_, ToolInt)
       ExitTxBx.Text = ToolInt.ToString()
-      if Not GetSpecials() Then
+      If Not GetSpecials() Then
          EgtTdbGetCurrToolParam(MCH_TP.USERNOTES, ToolString)
          UserNotesTxBx.Text = ToolString
       End If
@@ -601,7 +809,7 @@ Public Class ToolsDbPageUC
       EgtTdbSetCurrToolParam(MCH_TP.HEAD, HeadTxBx.Text)
       Int32.TryParse(ExitTxBx.Text, nTemp)
       EgtTdbSetCurrToolParam(MCH_TP.EXIT_, nTemp)
-      if Not SetSpecials() Then
+      If Not SetSpecials() Then
          EgtTdbSetCurrToolParam(MCH_TP.USERNOTES, UserNotesTxBx.Text)
       End If
    End Sub
@@ -637,7 +845,7 @@ Public Class ToolsDbPageUC
       Dim bShowUserNotes As Boolean = ((m_nToolType = MCH_TY.SAW_STD And m_CurrMachine.ShowUserNotes <> 0) Or m_CurrMachine.ShowUserNotes = 1)
       UserNotesTxBl.Visibility = If(bShowUserNotes, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       UserNotesTxBx.Visibility = If(bShowUserNotes, Windows.Visibility.Visible, Windows.Visibility.Hidden)
-      Dim bShowSpecials As Boolean = ((m_nToolType = MCH_TY.SAW_STD And m_CurrMachine.ShowSpecials <> 0) Or m_CurrMachine.ShowSpecials = 1) 
+      Dim bShowSpecials As Boolean = ((m_nToolType = MCH_TY.SAW_STD And m_CurrMachine.ShowSpecials <> 0) Or m_CurrMachine.ShowSpecials = 1)
       SerNbrTxBl.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       SerNbrTxBx.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       CodeTxBl.Visibility = If(bShowSpecials, Windows.Visibility.Visible, Windows.Visibility.Hidden)
@@ -759,6 +967,10 @@ Public Class ToolsDbPageUC
             nMsg = MSG_TOOLSDBPAGEUC + 23       ' Spessore
          Case MCH_TP.MAXMAT
             nMsg = MSG_TOOLSDBPAGEUC + 24       ' Tagliente
+         Case MCH_TP.CORE
+            nMsg = 90720                        ' Anima
+         Case STEM
+            nMsg = 90719                        ' Lunghezza portautensile
       End Select
       ' Predispongo calcolatrice (converto sempre in UIUnits perchè tutte lunghezze)
       Dim EgtCalculator As New EgtCalculatorWD(m_MainWindow, EgtToUiUnits(dVal), 300, WidthType.PIXEL, 0, 0, EgtMsg(nMsg))
@@ -776,7 +988,7 @@ Public Class ToolsDbPageUC
    Private Sub RecreateToolDraw(ByVal dVal As Double)
       ' Salvo il vecchio valore
       Dim dOldVal As Double
-      GetVariableValue( dOldVal)
+      GetVariableValue(dOldVal)
       ' Aggiorno dati utensile
       SetVariableValue(dVal)
       ' Creo utensile
@@ -789,7 +1001,20 @@ Public Class ToolsDbPageUC
    Private Function GetVariableValue(ByRef dVal As Double) As Boolean
       ' Recupero valore variabile
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
-      Return EgtTdbGetCurrToolParam(GetVariableType(), dVal)
+      Dim nVarType As Integer = GetVariableType()
+      If m_nToolType <> MCH_TY.SAW_STD OrElse nVarType <> STEM Then
+         Return EgtTdbGetCurrToolParam(nVarType, dVal)
+      Else
+         Dim dL, dCore, dTh As Double
+         If EgtTdbGetCurrToolParam(MCH_TP.LEN, dL) AndAlso
+            EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore) AndAlso
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, dTh) Then
+            dVal = Math.Max(dL - (dCore + dTh) / 2, 0.0)
+            Return True
+         Else
+            Return False
+         End If
+      End If
    End Function
 
    Private Function SetVariableValue(ByVal dVal As Double) As Boolean
@@ -803,6 +1028,30 @@ Public Class ToolsDbPageUC
                EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dVal + 1)
             Case MCH_TP.DIAM
                EgtTdbSetCurrToolParam(MCH_TP.TOTDIAM, dVal)
+            Case MCH_TP.THICK
+               If m_bNewSawbladeMaker Then
+                  Dim dTh, dLen As Double
+                  If EgtTdbGetCurrToolParam(MCH_TP.THICK, dTh) AndAlso
+                     EgtTdbGetCurrToolParam(MCH_TP.LEN, dLen) Then
+                     Dim dNewLen As Double = dLen + ((dVal - dTh) / 2)
+                     EgtTdbSetCurrToolParam(MCH_TP.LEN, dNewLen)
+                     EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dNewLen + 1)
+                  Else
+                     Return False
+                  End If
+               End If
+            Case MCH_TP.CORE
+               If m_bNewSawbladeMaker Then
+                  Dim dCore, dLen As Double
+                  If EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore) AndAlso
+                     EgtTdbGetCurrToolParam(MCH_TP.LEN, dLen) Then
+                     Dim dNewLen As Double = dLen + ((dVal - dCore) / 2)
+                     EgtTdbSetCurrToolParam(MCH_TP.LEN, dNewLen)
+                     EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dNewLen + 1)
+                  Else
+                     Return False
+                  End If
+               End If
          End Select
       ElseIf m_nToolType = MCH_TY.DRILL_STD Then
          Select Case nType
@@ -828,7 +1077,19 @@ Public Class ToolsDbPageUC
                EgtTdbSetCurrToolParam(MCH_TP.TOTDIAM, dVal)
          End Select
       End If
-      Return EgtTdbSetCurrToolParam(nType, dVal)
+      If m_nToolType <> MCH_TY.SAW_STD OrElse nType <> STEM Then
+         Return EgtTdbSetCurrToolParam(nType, dVal)
+      Else
+         Dim dCore, dTh As Double
+         If EgtTdbGetCurrToolParam(MCH_TP.CORE, dCore) AndAlso
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, dTh) Then
+            Dim dL As Double = Math.Max(dVal, 0.0) + ((dCore + dTh) / 2)
+            EgtTdbSetCurrToolParam(MCH_TP.TOTLEN, dL + 1)
+            Return EgtTdbSetCurrToolParam(MCH_TP.LEN, dL)
+         Else
+            Return False
+         End If
+      End If
    End Function
 
    Private Function GetVariableType() As Integer
@@ -841,6 +1102,10 @@ Public Class ToolsDbPageUC
          nType = MCH_TP.THICK
       ElseIf m_sCurrVar = "MAXMAT" Then
          nType = MCH_TP.MAXMAT
+      ElseIf m_sCurrVar = "CORE" Then
+         nType = MCH_TP.CORE
+      ElseIf m_sCurrVar = "STEM" Then
+         nType = STEM
       End If
       Return nType
    End Function
@@ -902,6 +1167,13 @@ Public Class ToolsDbPageUC
                EgtTdbSetCurrToolParam(MCH_TP.THICK, dToolThick)
                EgtOutLog("ToolThick too small ->" & DoubleToString(dToolThick, 1))
             End If
+            Dim dToolCore As Double
+            EgtTdbGetCurrToolParam(MCH_TP.CORE, dToolCore)
+            If dToolCore < EPS_SMALL Then
+               dToolCore = If(dToolLen >= dToolThick, dToolThick - 1, 2 * dToolLen - dToolThick)
+               EgtTdbSetCurrToolParam(MCH_TP.CORE, dToolCore)
+               EgtOutLog("ToolCore too small ->" & DoubleToString(dToolCore, 1))
+            End If
             Dim dToolMaxMat As Double
             EgtTdbGetCurrToolParam(MCH_TP.MAXMAT, dToolMaxMat)
             If dToolMaxMat < EPS_SMALL Then
@@ -1004,7 +1276,7 @@ Public Class ToolsDbPageUC
    End Function
 
    Private Function CreateToolDraw() As Boolean
-      Dim nErr As Integer = EgtTdbCurrToolDraw( m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx(), ToolScene.GetCtx())
+      Dim nErr As Integer = EgtTdbCurrToolDraw(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx(), ToolScene.GetCtx())
       EgtSetCurrentContext(ToolScene.GetCtx())
       Return (nErr = 0)
    End Function
@@ -1057,4 +1329,4 @@ Public Class ToolsDbPageUC
       End If
    End Sub
 
-End Class
+End Class

Machine/WaterJetPageUC.xaml

@@ -0,0 +1,273 @@
+<UserControl x:Class="WaterJetPageUC"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+   xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+   xmlns:self="clr-namespace:OmagCUT.TreeViewItem"
+   mc:Ignorable="d" 
+   d:DesignHeight="768" d:DesignWidth="1280" Initialized="WaterJetPage_Initialized">
+
+   <!-- Definizione della PolishingsPage -->
+   <Border Style="{DynamicResource OmagCut_PageBorder}">
+
+      <Grid Name="WaterJetPageGrid" >
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="8*"/>
+            <ColumnDefinition Width="4*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+         </Grid.RowDefinitions>
+
+         <!--Lista dei materiali-->
+         <GroupBox Name="MaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
+                      Header="{Binding Material_Msg}"
+                      Grid.Row="0" BorderThickness="0">
+
+            <Grid>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="7*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+               </Grid.RowDefinitions>
+
+               <!--Lista dei materiali-->
+               <ListBox Name="MaterialsLstBx" 
+                             ItemsSource="{Binding MaterialList}" SelectedItem="{Binding SelMaterial}"
+                             Grid.RowSpan="2">
+                  <ListBox.ItemTemplate>
+                     <DataTemplate>
+                        <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                     </DataTemplate>
+                  </ListBox.ItemTemplate>
+               </ListBox>
+               <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
+               <EgtWPFLib:EgtTextBox Name="NewMaterialNameTxBx" Grid.Row="1" 
+                                          Width="220"
+                                          Text="{Binding sNewMaterial}"
+                                          Visibility="{Binding NewMaterial_Visibility}"
+                                          Style="{DynamicResource OmagCut_KeyboardTextBox}" 
+                                          KeyboardPosition="Top"/>
+               <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
+               <UniformGrid Grid.Row="2" Columns="3">
+                  <Button Name="NewMaterialBtn" Grid.Column="0"
+                                Content="{Binding New_Msg}"
+                                Command="{Binding NewMaterialCommand}"
+                                Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                  <Button Name="DeleteMaterialBtn" Grid.Column="1"
+                                Content="{Binding Delete_Msg}"
+                                Command="{Binding DeleteMaterialCommand}"
+                                Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                  <Button Name="ModifyMaterialBtn" Grid.Column="1"
+                                Content="{Binding Modify_Msg}"
+                                Command="{Binding ModifyMaterialCommand}"
+                                Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+               </UniformGrid>
+
+            </Grid>
+
+         </GroupBox>
+
+         <!--Raggruppo all'interno della stessa cornice le sottocatogorie e i parametri-->
+         <Border Style="{DynamicResource OmagCut_Border}" 
+                    Grid.Column="1" Grid.Row="0" 
+                    Grid.ColumnSpan="2" Grid.RowSpan="1">
+
+            <Grid Name="SubMaterialGrd" Grid.Column="1">
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+               </Grid.RowDefinitions>
+
+               <!--Sottocategoria dei materiali associata alla lista precedente-->
+               <GroupBox Name="SubMaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" 
+                              Header="{Binding SubMaterial_Msg}"
+                              Grid.Column="0" Grid.Row="0" 
+                              Grid.ColumnSpan="1" Grid.RowSpan="8" BorderThickness="0">
+
+                  <Grid Grid.Column="1">
+                     <Grid.RowDefinitions>
+                        <RowDefinition Height="7*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                     </Grid.RowDefinitions>
+
+                     <!--Lista dei materiali-->
+                     <ListBox Name="SubMaterialsLstBx" ItemsSource="{Binding Path=SelectedItem.SubMaterialList, ElementName=MaterialsLstBx}"
+                                     SelectedItem="{Binding Path=SelectedItem.SelSubMaterial, ElementName=MaterialsLstBx}"
+                                     Grid.RowSpan="2">
+                        <ListBox.ItemTemplate>
+                           <DataTemplate>
+                              <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                           </DataTemplate>
+                        </ListBox.ItemTemplate>
+                     </ListBox>
+
+                     <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
+                     <EgtWPFLib:EgtTextBox Name="NewSubMaterialNameTxBx" Grid.Row="1" 
+                                                  Width="220"
+                                                  Text="{Binding sNewSubMaterial}"
+                                                  Visibility="{Binding NewSubMaterial_Visibility}"
+                                                  Style="{DynamicResource OmagCut_KeyboardTextBox}" 
+                                                  KeyboardPosition="Top"/>
+
+                     <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
+                     <UniformGrid Grid.Row="2" Columns="3">
+                        <Button Name="NewSubMaterialBtn" Grid.Column="0"
+                                        Content="{Binding New_Msg}"
+                                        Command="{Binding NewSubMaterialCommand}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                        <Button Name="RemoveSubMaterialBtn" Grid.Column="1"
+                                        Content="{Binding Delete_Msg}"
+                                        Command="{Binding DeleteSubMaterialCommand}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                        <Button Name="ModifySubMaterialBtn" Grid.Column="1"
+                                        Content="{Binding Modify_Msg}"
+                                        Command="{Binding ModifySubMaterialCommand}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                     </UniformGrid>
+
+                  </Grid>
+
+               </GroupBox>
+
+               <!--Lista dei parametri associata alla sottovcategoria dei materiali-->
+               <GroupBox Name="ParamsGpBx" 
+                              Grid.Column="1" Grid.Row="0" Margin="0,0,0,3"
+                              Grid.ColumnSpan="3" Grid.RowSpan="8" BorderThickness="0">
+
+                  <!--Titolazione delle colonne della tabella-->
+                  <GroupBox.Header >
+                     <Grid Width="700">
+                        <Grid.ColumnDefinitions>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                        </Grid.ColumnDefinitions>
+
+                        <TextBlock Text="{Binding Thickness_Msg}" Grid.Column="0" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                        <TextBlock Text="{Binding Q1_Msg}" Grid.Column="1" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                        <TextBlock Text="{Binding Q2_Msg}" Grid.Column="2" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                        <TextBlock Text="{Binding Q3_Msg}" Grid.Column="3" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                        <TextBlock Text="{Binding Q4_Msg}" Grid.Column="4" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                        <TextBlock Text="{Binding Q5_Msg}" Grid.Column="5" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                        <TextBlock Text="{Binding QExtra_Msg}" Grid.Column="6" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                        <TextBlock Text="{Binding AngComp_Msg}" Grid.Column="7" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                     </Grid>
+
+                  </GroupBox.Header>
+
+                  <!--Definizione della Grid dei parametri delle lavorazioni-->
+                  <Grid Grid.Column="2">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="308*"/>
+                        <ColumnDefinition Width="73*"/>
+                     </Grid.ColumnDefinitions>
+                     <Grid.RowDefinitions>
+                        <RowDefinition Height="7*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                     </Grid.RowDefinitions>
+
+                     <ListBox Name="ParamLstBx"
+                                     ItemsSource="{Binding Path=SelectedItem.ParamList , ElementName=SubMaterialsLstBx}"
+                                     SelectedItem="{Binding Path=SelectedItem.SelWjParam , ElementName=SubMaterialsLstBx}"
+                                     Margin="0,0,0,0"
+                                     Grid.RowSpan="2" Grid.ColumnSpan="2">
+                        <ListBox.ItemTemplate>
+                           <DataTemplate>
+                              <Grid Width="700">
+                                 <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                 </Grid.ColumnDefinitions>
+
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Thickness}" Grid.Column="0"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q1}" Grid.Column="1"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q2}" Grid.Column="2"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q3}" Grid.Column="3"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q4}" Grid.Column="4"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q5}" Grid.Column="5"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                 <EgtWPFLib:EgtTextBox Text="{Binding QExtra}" Grid.Column="6"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                 <EgtWPFLib:EgtTextBox Text="{Binding dAngComp}" Grid.Column="7" IsLength="False"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                              </Grid>
+                           </DataTemplate>
+                        </ListBox.ItemTemplate>
+                     </ListBox>
+
+                     <UniformGrid Grid.Row="2" Columns="9" Grid.ColumnSpan="2">
+                        <Button Name="NewParamBtn" Grid.Column="0"
+                                        Command="{Binding NewWjParamCommand}"
+                                        Content="{Binding New_Msg}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                        <Button Name="RemoveParamBtn" Grid.Column="1"
+                                        Command="{Binding DeleteWjParamCommand}"
+                                        Content="{Binding Delete_Msg}"
+                                        Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
+                     </UniformGrid>
+
+                  </Grid>
+
+               </GroupBox>
+
+            </Grid>
+         </Border>
+         <Button Name="SaveKitBtn" Grid.Row="2" Grid.Column="2"
+                    Command="{Binding SaveCommand}"
+                    Content="{Binding Save_Msg}"
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+      </Grid>
+
+   </Border>
+
+</UserControl>

Machine/WaterJetPageUC.xaml.vb

@@ -0,0 +1,106 @@
+Imports System.Collections.ObjectModel
+Imports System.ComponentModel
+Imports EgtUILib
+Imports EgtWPFLib
+Imports EgtWPFLib5
+
+Public Class WaterJetPageUC
+
+   ' Riferimento alla MainWindow
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_refWaterjetDbWindowVM As WaterjetDbWindowVM_OmagCUT
+   Private m_sOrigNewMaterial As String = String.Empty
+   Private m_sOrigNewSubMaterial As String = String.Empty
+
+   Private Sub WaterJetPage_Initialized(sender As Object, e As EventArgs)
+      m_refWaterjetDbWindowVM = New WaterjetDbWindowVM_OmagCUT(m_MainWindow.m_CurrentMachine.sMachDir)
+      '----------------------------------------------------------------------------------------
+      ' TEMPORANEO - se dati in INCH e richiesta di frazioni eseguo la conversione in frazione!
+      ConvertParamListValueToFracrion()
+      '----------------------------------------------------------------------------------------
+      Me.DataContext = m_refWaterjetDbWindowVM
+      EgtWPFLib.Utility.MainWindow = m_MainWindow
+   End Sub
+
+   Public Sub WaterJetPage_Reinitialize()
+      m_refWaterjetDbWindowVM = New WaterjetDbWindowVM_OmagCUT(m_MainWindow.m_CurrentMachine.sMachDir)
+      '----------------------------------------------------------------------------------------
+      ' TEMPORANEO - se dati in INCH e richiesta di frazioni eseguo la conversione in frazione!
+      ConvertParamListValueToFracrion()
+      '----------------------------------------------------------------------------------------
+      Me.DataContext = m_refWaterjetDbWindowVM
+   End Sub
+
+   Private Sub NewMaterial_EgtOpening(sender As Object, e As EventArgs) Handles NewMaterialNameTxBx.EgtOpening
+      m_sOrigNewMaterial = NewMaterialNameTxBx.Text
+   End Sub
+
+   Private Sub NewSubMaterial_EgtOpening(sender As Object, e As EventArgs) Handles NewSubMaterialNameTxBx.EgtOpening
+      m_sOrigNewSubMaterial = NewSubMaterialNameTxBx.Text
+   End Sub
+
+   Private Sub NewMaterial_EgtClosed(sender As Object, e As EventArgs) Handles NewMaterialNameTxBx.EgtClosed
+      m_refWaterjetDbWindowVM.sNewMaterial = NewMaterialNameTxBx.Text
+      If String.IsNullOrEmpty(m_refWaterjetDbWindowVM.sNewMaterial) OrElse m_refWaterjetDbWindowVM.sNewMaterial = m_sOrigNewMaterial Then
+         m_refWaterjetDbWindowVM.NewMaterial_Visibility = Visibility.Collapsed
+      Else
+         m_refWaterjetDbWindowVM.Done("")
+         NewMaterialNameTxBx.Clear()
+      End If
+   End Sub
+
+   Private Sub NewSubMaterial_EgtClosed(sender As Object, e As EventArgs) Handles NewSubMaterialNameTxBx.EgtClosed
+      m_refWaterjetDbWindowVM.sNewSubMaterial = NewSubMaterialNameTxBx.Text
+      If String.IsNullOrEmpty(m_refWaterjetDbWindowVM.sNewSubMaterial) OrElse m_refWaterjetDbWindowVM.sNewSubMaterial = m_sOrigNewSubMaterial Then
+         m_refWaterjetDbWindowVM.NewSubMaterial_Visibility = Visibility.Collapsed
+      Else
+         m_refWaterjetDbWindowVM.Done("")
+         NewSubMaterialNameTxBx.Clear()
+      End If
+   End Sub
+
+   Private Sub ConvertParamListValueToFracrion()
+      ' TEMPORANEO - se dati in INCH e richiesta di frazioni eseguo la conversione in frazione!
+      Dim Index1 As Integer = 0
+      For Index1 = 0 To m_refWaterjetDbWindowVM.MaterialList.Count - 1
+         Dim Index2 As Integer = 0
+         For Index2 = 0 To m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList.Count - 1
+            Dim Index3 As Integer = 0
+            For Index3 = 0 To m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList.Count - 1
+               Dim dThickness As Double
+               Dim dQ1 As Double
+               Dim dQ2 As Double
+               Dim dQ3 As Double
+               Dim dQ4 As Double
+               Dim dQ5 As Double
+               Dim dQExtra As Double
+               Dim dAngComp As Double
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Thickness, dThickness)
+               Dim sVal As String = LenToString(dThickness, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetThickness(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q1, dQ1)
+               sVal = LenToString(dQ1, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ1(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q2, dQ2)
+               sVal = LenToString(dQ2, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ2(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q3, dQ3)
+               sVal = LenToString(dQ3, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ3(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q4, dQ4)
+               sVal = LenToString(dQ4, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ4(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q5, dQ5)
+               sVal = LenToString(dQ5, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ5(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).QExtra, dQExtra)
+               sVal = LenToString(dQExtra, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQExtra(sVal)
+               StringToDouble(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).dAngComp, dAngComp)
+            Next
+         Next
+      Next
+   End Sub
+
+End Class
+

Machine/WaterJetPageVM.vb

@@ -0,0 +1,915 @@
+'Imports System.Collections.ObjectModel
+'Imports System.ComponentModel
+'Imports EgtUILib
+'Imports EgtWPFLib
+
+'Public Class WaterJetPageVM
+'   Private m_refWaterPageV As WaterJetPageUC
+
+'   ' lista dei materiali
+'   Private m_ListMaterial As New ObservableCollection(Of MaterialWJ)
+'   Public ReadOnly Property ListMaterial As ObservableCollection(Of MaterialWJ)
+'      Get
+'         Return m_ListMaterial
+'      End Get
+'   End Property
+'   ' materiale selezionato
+'   Private m_SelectedMaterial As MaterialWJ
+'   Public Property SelectedMaterial As MaterialWJ
+'      Get
+'         Return m_SelectedMaterial
+'      End Get
+'      Set(value As MaterialWJ)
+'         m_SelectedMaterial = value
+'      End Set
+'   End Property
+'   ' submateriale selezionato
+'   Private m_SelectedSubMaterial As SubMaterialWJ
+'   Public Property SelectedSubMaterial As SubMaterialWJ
+'      Get
+'         Return m_SelectedSubMaterial
+'      End Get
+'      Set(value As SubMaterialWJ)
+'         m_SelectedSubMaterial = value
+'      End Set
+'   End Property
+'   ' lista parametri selezionata
+'   Private m_SelectedParam As ParamWJ
+'   Public Property SelectedParam As ParamWJ
+'      Get
+'         Return m_SelectedParam
+'      End Get
+'      Set(value As ParamWJ)
+'         m_SelectedParam = value
+'      End Set
+'   End Property
+
+'   Private m_sNewMaterial As MaterialWJ
+'   Public Property sNewMaterial As String
+'      Get
+'         Return m_sNewMaterial.sMaterial
+'      End Get
+'      Set(value As String)
+'         m_sNewMaterial = New MaterialWJ(value)
+'      End Set
+'   End Property
+
+'   Private m_NewMaterialVisibility As Visibility = Visibility.Hidden
+'   Public Property NewMaterialVisibility As Visibility
+'      Get
+'         Return m_NewMaterialVisibility
+'      End Get
+'      Set(value As Visibility)
+'         m_NewMaterialVisibility = value
+'      End Set
+'   End Property
+
+'   Sub New(WaterJetPageV As WaterJetPageUC)
+'      m_refWaterPageV = WaterJetPageV
+'      ' Creo una lista di materiali come esempio
+'      ListMaterial.Add(New MaterialWJ("Marmo"))
+'      ListMaterial.Last.ListOfSubMaterial.Add(New SubMaterialWJ("Binaco"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("10", "Bq1", "Bq2", "Bq3", "Bq4", "Bq5"))
+'      ListMaterial.Last.ListOfSubMaterial.Add(New SubMaterialWJ("Nero"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("20", "Nq1", "Nq2", "Nq3", "Nq4", "Nq5"))
+'      ListMaterial.Add(New MaterialWJ("Granito"))
+'      ListMaterial.Last.ListOfSubMaterial.Add(New SubMaterialWJ("GR_Binaco"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("15", "gBq1", "gBq2", "Bq3", "gBq4", "gBq5"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("15.5", "g_Bq1", "g_Bq2", "g_Bq3", "g_Bq4", "g_Bq5"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("15.8", "G_Bq1", "G_Bq2", "G_Bq3", "G_Bq4", "G_Bq5"))
+'      ListMaterial.Last.ListOfSubMaterial.Add(New SubMaterialWJ("GR_Nero"))
+'      ListMaterial.Last.ListOfSubMaterial.Last.ListOfParam.Add(New ParamWJ("18", "gNq1", "gNq2", "gNq3", "gNq4", "gNq5"))
+
+'      SelectedMaterial = m_ListMaterial(0)
+'      SelectedSubMaterial = m_SelectedMaterial.ListOfSubMaterial(0)
+'      SelectedParam = SelectedSubMaterial.ListOfParam(0)
+'   End Sub
+
+'   Private m_cmdOk As ICommand
+'   Public ReadOnly Property OkCommand() As ICommand
+'      Get
+'         If m_cmdOk Is Nothing Then
+'            m_cmdOk = New Command(AddressOf Ok)
+'         End If
+'         Return m_cmdOk
+'      End Get
+'   End Property
+
+'   Private Sub Ok()
+'      ' Mostro textbox per il nome
+'      m_refWaterPageV.KitNameTxBx.Text = String.Empty
+'      m_refWaterPageV.KitNameTxBx.Visibility = Windows.Visibility.Visible
+'      m_refWaterPageV.KitsLstBx.SetValue(Grid.RowSpanProperty, 1)
+'      MessageBox.Show("Prova di Binding", "Prova di Binding", MessageBoxButton.OK, MessageBoxImage.Asterisk, MessageBoxResult.OK)
+'      m_refWaterPageV.KitNameTxBx.Visibility = Windows.Visibility.Hidden
+'      m_refWaterPageV.KitsLstBx.SetValue(Grid.RowSpanProperty, 2)
+'   End Sub
+
+'End Class
+
+
+'Public Class MaterialWJ
+
+'   Private m_sMaterial As String = String.Empty
+'   Public ReadOnly Property sMaterial As String
+'      Get
+'         Return m_sMaterial
+'      End Get
+'   End Property
+
+'   Private m_ListOfSubMaterial As New ObservableCollection(Of SubMaterialWJ)
+'   Public Property ListOfSubMaterial As ObservableCollection(Of SubMaterialWJ)
+'      Get
+'         Return m_ListOfSubMaterial
+'      End Get
+'      Set(value As ObservableCollection(Of SubMaterialWJ))
+'         m_ListOfSubMaterial = value
+'      End Set
+'   End Property
+
+'   Sub New(sMat As String)
+'      m_sMaterial = sMat
+'   End Sub
+
+'End Class
+
+'Public Class SubMaterialWJ
+
+'   Dim m_sSubMaterial As String
+'   Public Property sSubMaterial As String
+'      Get
+'         Return m_sSubMaterial
+'      End Get
+'      Set(value As String)
+'         m_sSubMaterial = value
+'      End Set
+'   End Property
+
+'   Private m_ListOfParam As New ObservableCollection(Of ParamWJ)
+'   Public Property ListOfParam As ObservableCollection(Of ParamWJ)
+'      Get
+'         Return m_ListOfParam
+'      End Get
+'      Set(value As ObservableCollection(Of ParamWJ))
+'         m_ListOfParam = value
+'      End Set
+'   End Property
+
+'   Sub New(sName As String)
+'      m_sSubMaterial = sName
+'   End Sub
+'End Class
+
+'Public Class ParamWJ
+
+'   Private m_Thickness As String
+'   Private m_Q1 As String
+'   Private m_Q2 As String
+'   Private m_Q3 As String
+'   Private m_Q4 As String
+'   Private m_Q5 As String
+
+'   Public Property Q1 As String
+'      Get
+'         Return m_Q1
+'      End Get
+'      Set(value As String)
+'         m_Q1 = value
+'      End Set
+'   End Property
+
+'   Public Property Thickness As String
+'      Get
+'         Return m_Thickness
+'      End Get
+'      Set(value As String)
+'         m_Thickness = value
+'      End Set
+'   End Property
+
+'   Public Property Q2 As String
+'      Get
+'         Return m_Q2
+'      End Get
+'      Set(value As String)
+'         m_Q2 = value
+'      End Set
+'   End Property
+
+'   Public Property Q3 As String
+'      Get
+'         Return m_Q3
+'      End Get
+'      Set(value As String)
+'         m_Q3 = value
+'      End Set
+'   End Property
+
+'   Public Property Q4 As String
+'      Get
+'         Return m_Q4
+'      End Get
+'      Set(value As String)
+'         m_Q4 = value
+'      End Set
+'   End Property
+
+'   Public Property Q5 As String
+'      Get
+'         Return m_Q5
+'      End Get
+'      Set(value As String)
+'         m_Q5 = value
+'      End Set
+'   End Property
+
+'   Sub New(sT As String, sQ1 As String, sQ2 As String, sQ3 As String, sQ4 As String, sQ5 As String)
+'      m_Thickness = sT
+'      m_Q1 = sQ1
+'      m_Q2 = sQ2
+'      m_Q3 = sQ3
+'      m_Q4 = sQ4
+'      m_Q5 = sQ5
+'   End Sub
+
+'End Class
+
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class WaterjetDbWindowVM
+   Inherits VMBase
+   ' Riferimento alla MainWindow
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_refWaterPageV As WaterJetPageUC
+
+#Region "FIELDS & PROPERTIES"
+
+
+#Region "Materiali"
+   Private Property m_MaterialList As ObservableCollection(Of WjMaterial)
+   Public Property MaterialList As ObservableCollection(Of WjMaterial)
+      Get
+         Return m_MaterialList
+      End Get
+      Set(value As ObservableCollection(Of WjMaterial))
+         m_MaterialList = value
+      End Set
+   End Property
+
+   Private Property m_SelMaterial As WjMaterial
+   Public Property SelMaterial As WjMaterial
+      Get
+         Return m_SelMaterial
+      End Get
+      Set(value As WjMaterial)
+         m_SelMaterial = value
+      End Set
+   End Property
+
+   Private Property m_sNewMaterial As String
+   Public Property sNewMaterial As String
+      Get
+         Return m_sNewMaterial
+      End Get
+      Set(value As String)
+         m_sNewMaterial = value
+      End Set
+   End Property
+
+   Private Property m_NewMaterial_Visibility As Visibility = Visibility.Collapsed
+   Public Property NewMaterial_Visibility As Visibility
+      Get
+         Return m_NewMaterial_Visibility
+      End Get
+      Set(value As Visibility)
+         m_NewMaterial_Visibility = value
+         NotifyPropertyChanged(NameOf(NewMaterial_Visibility))
+      End Set
+   End Property
+
+#End Region
+
+#Region "SubMateriali"
+   Private Property m_SubMaterialList As New ObservableCollection(Of WjSubMaterial)
+   Public Property SubMaterialList As ObservableCollection(Of WjSubMaterial)
+      Get
+         Return m_SubMaterialList
+      End Get
+      Set(value As ObservableCollection(Of WjSubMaterial))
+         m_SubMaterialList = value
+      End Set
+   End Property
+
+   'Private Property m_SelSubMaterial As WjSubMaterial
+   'Public Property SelSubMaterial As WjSubMaterial
+   '   Get
+   '      Return m_SelSubMaterial
+   '   End Get
+   '   Set(value As WjSubMaterial)
+   '      m_SelSubMaterial = value
+   '   End Set
+   'End Property
+
+   Private Property m_sNewSubMaterial As String
+   Public Property sNewSubMaterial As String
+      Get
+         Return m_sNewSubMaterial
+      End Get
+      Set(value As String)
+         m_sNewSubMaterial = value
+      End Set
+   End Property
+
+   Private Property m_NewSubMaterial_Visibility As Visibility = Visibility.Collapsed
+   Public Property NewSubMaterial_Visibility As Visibility
+      Get
+         Return m_NewSubMaterial_Visibility
+      End Get
+      Set(value As Visibility)
+         m_NewSubMaterial_Visibility = value
+         NotifyPropertyChanged(NameOf(NewSubMaterial_Visibility))
+      End Set
+   End Property
+
+#End Region
+
+#Region "Parametri"
+   Private Property m_ParamList As ObservableCollection(Of WjParam)
+   Public Property ParamList As ObservableCollection(Of WjParam)
+      Get
+         Return m_ParamList
+      End Get
+      Set(value As ObservableCollection(Of WjParam))
+         m_ParamList = value
+      End Set
+   End Property
+
+   'Private Property m_SelParam As WjParam
+   'Public Property SelParam As WjParam
+   '   Get
+   '      Return m_SelParam
+   '   End Get
+   '   Set(value As WjParam)
+   '      m_SelParam = value
+   '   End Set
+   'End Property
+
+   Private m_HeadParamLstBx_Width As Double
+   Public ReadOnly Property HeadParamLstBx_Width As Double
+      Get
+         If m_HeadParamLstBx_Width < 10 Then
+            Return 700
+         End If
+         Return m_HeadParamLstBx_Width
+      End Get
+   End Property
+
+#End Region
+
+   Const S_MATERIALS As String = "Materials"
+
+   ' Definizione comandi
+   Private m_cmdNewMaterial As ICommand
+   Private m_cmdDeleteMaterial As ICommand
+   Private m_cmdNewSubMaterial As ICommand
+   Private m_cmdDeleteSubMaterial As ICommand
+   Private m_cmdNewWjParam As ICommand
+   Private m_cmdDeleteWjParam As ICommand
+   Private m_cmdSave As ICommand
+   Private m_cmdDone As ICommand
+
+#End Region
+
+#Region "MESSAGES"
+
+   Public ReadOnly Property Material_Msg As String
+      Get
+         Return "Materiale"
+      End Get
+   End Property
+
+   Public ReadOnly Property SubMaterial_Msg As String
+      Get
+         Return "SubMateriale"
+      End Get
+   End Property
+
+   Public ReadOnly Property Id_Msg As String
+      Get
+         Return "Id"
+      End Get
+   End Property
+
+   Public ReadOnly Property Thickness_Msg As String
+      Get
+         Return "Spessore"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q1_Msg As String
+      Get
+         Return "Q1"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q2_Msg As String
+      Get
+         Return "Q2"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q3_Msg As String
+      Get
+         Return "Q3"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q4_Msg As String
+      Get
+         Return "Q4"
+      End Get
+   End Property
+
+   Public ReadOnly Property Q5_Msg As String
+      Get
+         Return "Q5"
+      End Get
+   End Property
+
+   Public ReadOnly Property QExtra_Msg As String
+      Get
+         Return "QExtra"
+      End Get
+   End Property
+
+   Public ReadOnly Property AngComp_Msg As String
+      Get
+         Return "Ang"
+      End Get
+   End Property
+
+   Public ReadOnly Property New_Msg As String
+      Get
+         Return "Nuovo"
+      End Get
+   End Property
+
+   Public ReadOnly Property Delete_Msg As String
+      Get
+         Return "Elimina"
+      End Get
+   End Property
+
+   Public ReadOnly Property Save_Msg As String
+      Get
+         Return "Salva"
+      End Get
+   End Property
+
+   Public ReadOnly Property Modify_Msg As String
+      Get
+         Return "Modifica"
+      End Get
+   End Property
+
+#End Region
+
+#Region "CONSTRUCTOR"
+
+   Sub New(refContext As WaterJetPageUC)
+      ' definisco il riferiento con la pagina xaml
+      m_refWaterPageV = refContext
+      ' Leggo valori da file Data e li carico nelle proprietà
+      Dim sFilePath As String = m_MainWindow.m_CurrentMachine.sMachDir & "\" &  MACHININGS_DIR & "\" & WATERJETDB_FILE
+      MaterialList = New ObservableCollection(Of WjMaterial)
+
+      If File.Exists(sFilePath) Then
+         Dim sMaterial As String = String.Empty
+
+         If EgtUILib.GetPrivateProfileString(S_MATERIALS, "1", "", sMaterial, sFilePath) > 0 Then
+            Dim sMaterials() As String = sMaterial.Split(","c)
+            Dim ind As Integer = 0
+            For ind = 0 To sMaterials.Length() - 1
+
+               'recupero i sottomateriali
+               Dim Index As Integer = 1
+               Dim sSubMat As String = String.Empty
+               Dim SubMatList As New ObservableCollection(Of WjSubMaterial)
+               While EgtUILib.GetPrivateProfileString(sMaterials(ind), Index.ToString(), "", sSubMat, sFilePath) > 0
+
+
+                  ' recupero la lista dei Q
+                  Dim QInd As Integer = 1
+                  Dim sParam As String = String.Empty
+                  Dim QParamList As New ObservableCollection(Of WjParam)
+                  While EgtUILib.GetPrivateProfileString(sMaterials(ind) & "." & sSubMat, QInd.ToString(), "", sParam, sFilePath) > 0
+                     Dim sParams() As String = sParam.Split(","c)
+                     If sParams.Length() >= 7 Then
+                        Dim dThickness As Double
+                        Dim dQ1 As Double
+                        Dim dQ2 As Double
+                        Dim dQ3 As Double
+                        Dim dQ4 As Double
+                        Dim dQ5 As Double
+                        Dim dQExtra As Double
+                        StringToDouble(sParams(0), dThickness)
+                        StringToDouble(sParams(1), dQ1)
+                        StringToDouble(sParams(2), dQ2)
+                        StringToDouble(sParams(3), dQ3)
+                        StringToDouble(sParams(4), dQ4)
+                        StringToDouble(sParams(5), dQ5)
+                        StringToDouble(sParams(6), dQExtra)
+                        Dim LocalWjParam As New WjParam(QInd, dThickness, dQ1, dQ2, dQ3, dQ4, dQ5, dQExtra, m_refWaterPageV)
+                        QParamList.Add(LocalWjParam)
+                        ' leggo il nuovo parametro di correzione conicità (di default il parametro è 0)
+                        If sParams.Length() >= 8 Then
+                           Dim dAngCompo As Double
+                           StringToDouble(sParams(7), dAngCompo)
+                           LocalWjParam.dAngComp = dAngCompo
+                        End If
+                     End If
+                     QInd += 1
+                  End While
+
+                  SubMatList.Add(New WjSubMaterial(sSubMat, QParamList))
+                  Index += 1
+               End While
+
+               MaterialList.Add(New WjMaterial(sMaterials(ind), SubMatList))
+            Next
+
+         End If
+
+      End If
+
+   End Sub
+
+   Public Sub RefreshDImensionPage()
+      m_HeadParamLstBx_Width = m_refWaterPageV.ParamsGpBx.ActualWidth - 20
+      NotifyPropertyChanged(NameOf(HeadParamLstBx_Width))
+   End Sub
+
+#End Region    ' Constructor
+
+#Region "COMMANDS"
+
+#Region "NewMaterialCommand"
+
+   Public ReadOnly Property NewMaterialCommand As ICommand
+      Get
+         If m_cmdNewMaterial Is Nothing Then
+            m_cmdNewMaterial = New Command(AddressOf NewMaterial)
+         End If
+         Return m_cmdNewMaterial
+      End Get
+   End Property
+
+   Public Sub NewMaterial(ByVal param As Object)
+      NewSubMaterial_Visibility = Visibility.Collapsed
+      NewMaterial_Visibility = Visibility.Visible
+   End Sub
+
+#End Region ' NewMaterial
+
+#Region "DeleteMaterialCommand"
+
+   Public ReadOnly Property DeleteMaterialCommand As ICommand
+      Get
+         If m_cmdDeleteMaterial Is Nothing Then
+            m_cmdDeleteMaterial = New Command(AddressOf DeleteMaterial)
+         End If
+         Return m_cmdDeleteMaterial
+      End Get
+   End Property
+
+   Public Sub DeleteMaterial(ByVal param As Object)
+      If Not IsNothing(SelMaterial) Then
+         MaterialList.Remove(SelMaterial)
+         'SelMaterial.NotifyPropertyChanged(NameOf(MaterialList))
+      End If
+   End Sub
+
+#End Region ' DeleteMaterial
+
+#Region "NewSubMaterialCommand"
+
+   Public ReadOnly Property NewSubMaterialCommand As ICommand
+      Get
+         If m_cmdNewSubMaterial Is Nothing Then
+            m_cmdNewSubMaterial = New Command(AddressOf NewSubMaterial)
+         End If
+         Return m_cmdNewSubMaterial
+      End Get
+   End Property
+
+   Public Sub NewSubMaterial(ByVal param As Object)
+      If Not IsNothing(SelMaterial) Then
+         NewMaterial_Visibility = Visibility.Collapsed
+         NewSubMaterial_Visibility = Visibility.Visible
+
+      End If
+   End Sub
+
+#End Region ' NewSubMaterial
+
+#Region "DeleteSubMaterialCommand"
+
+   Public ReadOnly Property DeleteSubMaterialCommand As ICommand
+      Get
+         If m_cmdDeleteSubMaterial Is Nothing Then
+            m_cmdDeleteSubMaterial = New Command(AddressOf DeleteSubMaterial)
+         End If
+         Return m_cmdDeleteSubMaterial
+      End Get
+   End Property
+
+   Public Sub DeleteSubMaterial(ByVal param As Object)
+      If Not IsNothing(SelMaterial.SelSubMaterial) Then
+         SelMaterial.SubMaterialList.Remove(SelMaterial.SelSubMaterial)
+         SelMaterial.NotifyPropertyChanged(NameOf(SubMaterialList))
+      End If
+   End Sub
+
+#End Region ' DeleteSubMaterial
+
+#Region "NewWjParamCommand"
+
+   Public ReadOnly Property NewWjParamCommand As ICommand
+      Get
+         If m_cmdNewWjParam Is Nothing Then
+            m_cmdNewWjParam = New Command(AddressOf NewWjParam)
+         End If
+         Return m_cmdNewWjParam
+      End Get
+   End Property
+
+   Public Sub NewWjParam(ByVal param As Object)
+      If Not IsNothing(SelMaterial.SelSubMaterial) Then
+         Dim nId As Integer = 0
+         If IsNothing(SelMaterial.SelSubMaterial.ParamList) Then
+            nId = 1
+            SelMaterial.SelSubMaterial.ParamList = New ObservableCollection(Of WjParam)
+         Else
+            nId = SelMaterial.SelSubMaterial.ParamList.Count + 1
+         End If
+         SelMaterial.SelSubMaterial.ParamList.Add(New WjParam(nId, 0, 0, 0, 0, 0, 0, 0, m_refWaterPageV))
+         SelMaterial.SelSubMaterial.NotifyPropertyChanged(NameOf(ParamList))
+      End If
+   End Sub
+
+#End Region ' NewWjParam
+
+#Region "DeleteWjParamCommand"
+
+   Public ReadOnly Property DeleteWjParamCommand As ICommand
+      Get
+         If m_cmdDeleteWjParam Is Nothing Then
+            m_cmdDeleteWjParam = New Command(AddressOf DeleteWjParam)
+         End If
+         Return m_cmdDeleteWjParam
+      End Get
+   End Property
+
+   Public Sub DeleteWjParam(ByVal param As Object)
+      If Not IsNothing(SelMaterial.SelSubMaterial.SelWjParam) Then
+         SelMaterial.SelSubMaterial.ParamList.Remove(SelMaterial.SelSubMaterial.SelWjParam)
+         SelMaterial.SelSubMaterial.NotifyPropertyChanged(NameOf(ParamList))
+      End If
+   End Sub
+
+#End Region ' DeleteWjParam
+
+#Region "DoneCommand"
+
+   Public ReadOnly Property DoneCommand As ICommand
+      Get
+         If m_cmdDone Is Nothing Then
+            m_cmdDone = New Command(AddressOf Done)
+         End If
+         Return m_cmdDone
+      End Get
+   End Property
+
+   Public Sub Done(ByVal param As Object)
+      If NewMaterial_Visibility = Visibility.Visible Then
+         MaterialList.Add(New WjMaterial(sNewMaterial))
+         NotifyPropertyChanged(NameOf(MaterialList))
+         NewMaterial_Visibility = Visibility.Collapsed
+      ElseIf NewSubMaterial_Visibility = Visibility.Visible Then
+         SelMaterial.SubMaterialList.Add(New WjSubMaterial(sNewSubMaterial))
+         NotifyPropertyChanged(NameOf(SubMaterialList))
+         NewSubMaterial_Visibility = Visibility.Collapsed
+      End If
+   End Sub
+
+#End Region ' Done
+
+#End Region    ' Commands
+
+End Class
+
+Public Class WjMaterial
+   Inherits VMBase
+
+   Private m_Name As String
+   Public Property Name As String
+      Get
+         Return m_Name
+      End Get
+      Set(value As String)
+         m_Name = value
+      End Set
+   End Property
+
+   Private m_SubMaterialList As ObservableCollection(Of WjSubMaterial)
+   Public Property SubMaterialList As ObservableCollection(Of WjSubMaterial)
+      Get
+         Return m_SubMaterialList
+      End Get
+      Set(value As ObservableCollection(Of WjSubMaterial))
+         m_SubMaterialList = value
+      End Set
+   End Property
+
+   Private Property m_SelSubMaterial As WjSubMaterial
+   Public Property SelSubMaterial As WjSubMaterial
+      Get
+         Return m_SelSubMaterial
+      End Get
+      Set(value As WjSubMaterial)
+         m_SelSubMaterial = value
+      End Set
+   End Property
+
+   Sub New(sName As String, SubMatList As ObservableCollection(Of WjSubMaterial))
+      m_Name = sName
+      m_SubMaterialList = SubMatList
+   End Sub
+
+   Sub New(sName As String)
+      m_Name = sName
+   End Sub
+
+End Class
+
+Public Class WjSubMaterial
+   Inherits VMBase
+
+   Private m_Name As String
+   Public Property Name As String
+      Get
+         Return m_Name
+      End Get
+      Set(value As String)
+         m_Name = value
+      End Set
+   End Property
+
+   Private m_ParamList As ObservableCollection(Of WjParam)
+   Public Property ParamList As ObservableCollection(Of WjParam)
+      Get
+         Return m_ParamList
+      End Get
+      Set(value As ObservableCollection(Of WjParam))
+         m_ParamList = value
+      End Set
+   End Property
+
+   Private Property m_SelWjParam As WjParam
+   Public Property SelWjParam As WjParam
+      Get
+         Return m_SelWjParam
+      End Get
+      Set(value As WjParam)
+         m_SelWjParam = value
+      End Set
+   End Property
+
+   Sub New(sName As String, ParamList As ObservableCollection(Of WjParam))
+      m_Name = sName
+      m_ParamList = ParamList
+   End Sub
+
+   Sub New(sName As String)
+      m_Name = sName
+   End Sub
+
+End Class
+
+Public Class WjParam
+
+   Private m_Id As Integer
+   Public Property Id As Integer
+      Get
+         Return m_Id
+      End Get
+      Set(value As Integer)
+         m_Id = value
+      End Set
+   End Property
+
+   Private m_Thickness As Double
+   Public Property Thickness As Double
+      Get
+         Return m_Thickness
+      End Get
+      Set(value As Double)
+         m_Thickness = value
+      End Set
+   End Property
+
+   Private m_Q1 As Double
+   Public Property Q1 As Double
+      Get
+         Return m_Q1
+      End Get
+      Set(value As Double)
+         m_Q1 = value
+      End Set
+   End Property
+
+   Private m_Q2 As Double
+   Public Property Q2 As Double
+      Get
+         Return m_Q2
+      End Get
+      Set(value As Double)
+         m_Q2 = value
+      End Set
+   End Property
+
+   Private m_Q3 As Double
+   Public Property Q3 As Double
+      Get
+         Return m_Q3
+      End Get
+      Set(value As Double)
+         m_Q3 = value
+      End Set
+   End Property
+
+   Private m_Q4 As Double
+   Public Property Q4 As Double
+      Get
+         Return m_Q4
+      End Get
+      Set(value As Double)
+         m_Q4 = value
+      End Set
+   End Property
+
+   Private m_Q5 As Double
+   Public Property Q5 As Double
+      Get
+         Return m_Q5
+      End Get
+      Set(value As Double)
+         m_Q5 = value
+      End Set
+   End Property
+
+   Private m_QExtra As Double
+   Public Property QExtra As Double
+      Get
+         Return m_QExtra
+      End Get
+      Set(value As Double)
+         m_QExtra = value
+      End Set
+   End Property
+
+   ' angolo di compensazione conicità getto: 01/02/2023 ver 2.5b1
+   Private m_dAngComp As Double = 0
+   Public Property dAngComp As Double
+      Get
+         Return m_dAngComp
+      End Get
+      Set(value As Double)
+         m_dAngComp = value
+      End Set
+   End Property
+
+   Public ReadOnly Property ParamLstBx_Width As Double
+      Get
+         Return m_refWaterPageV.ParamsGpBx.ActualWidth - 20
+      End Get
+   End Property
+
+   Private m_refWaterPageV As WaterJetPageUC
+
+   Sub New(nId As Integer, dThickness As Double, dQ1 As Double, dQ2 As Double, dQ3 As Double, dQ4 As Double, dQ5 As Double, dQExtra As Double, ByRef refWJPage As WaterJetPageUC)
+      m_Id = nId
+      m_Thickness = dThickness
+      m_Q1 = dQ1
+      m_Q2 = dQ2
+      m_Q3 = dQ3
+      m_Q4 = dQ4
+      m_Q5 = dQ5
+      m_QExtra = dQExtra
+      m_refWaterPageV = refWJPage
+   End Sub
+
+End Class

Machine/WaterjetDbWindowVM.vb

@@ -0,0 +1,61 @@
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib5
+Imports EgtWPFLib
+
+' nuova libreria EgtWPFLib5 ver 2.4g1
+Public Class WaterjetDbWindowVM_OmagCUT
+   Inherits EgtWPFLib5.WaterjetDbWindowVM
+
+   Public Function CloseWaterjetDb_OmagCut(MainWindow As Window) As SaveWndBtnEnum
+      If bIsModified Then
+         Dim SaveWjDbWnd As New EgtMsgBox(MainWindow, "", EgtMsg(31759), EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL)
+         Select Case SaveWjDbWnd.m_nPressedBtn
+            Case 1   ' Yes
+               WriteWaterjetDb()
+               bIsModified = False
+               Return SaveWndBtnEnum.YES
+            Case 2   ' No
+               Return SaveWndBtnEnum.NO
+            Case Else   ' Cancel
+               Return SaveWndBtnEnum.CANCEL
+         End Select
+      Else
+         Dim bExitFor As Boolean = False
+         For Each Material As EgtWPFLib5.WjMaterial In MaterialList
+            If Not IsNothing(Material.SubMaterialList) Then
+               For Each SubMaterial As EgtWPFLib5.WjSubMaterial In Material.SubMaterialList
+                  If Not IsNothing(SubMaterial.ParamList) Then
+                     For Each QParam As EgtWPFLib5.WjParam In SubMaterial.ParamList
+                        bExitFor = QParam.IsModified()
+                        If bExitFor Then Exit For
+                     Next
+                  End If
+                  If bExitFor Then Exit For
+               Next
+            End If
+            If bExitFor Then Exit For
+         Next
+         If bExitFor Then
+            Dim SaveWjDbWnd As New EgtMsgBox(MainWindow, "", EgtMsg(31759), EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL)
+            Select Case SaveWjDbWnd.m_nPressedBtn
+               Case 1   ' Yes
+                  WriteWaterjetDb()
+                  bIsModified = False
+                  Return SaveWndBtnEnum.YES
+               Case 2   ' No
+                  Return SaveWndBtnEnum.NO
+               Case Else   ' Cancel
+                  Return SaveWndBtnEnum.CANCEL
+            End Select
+         End If
+      End If
+      Return SaveWndBtnEnum.YES
+   End Function
+
+   Sub New(sMachDir As String)
+      MyBase.New(sMachDir)
+   End Sub
+
+End Class

MainWindow.xaml.vb

@@ -2,6 +2,7 @@
 Imports System.Collections.ObjectModel
 Imports EgtUILib
 Imports EgtWPFLib
+Imports EgtPHOTOLib
 Imports System.ComponentModel
 Imports System.Threading
 Imports System.Windows.Threading
@@ -37,6 +38,8 @@ Class MainWindow
    Friend m_MachinePageUC As MachinePageUC
    Friend m_OptionsPageUC As OptionsPageUC
 
+   Friend m_IsClosingApplication As Integer = 0
+
    ' Dichiarazione variabili direttori
    Private m_sExeRoot As String = String.Empty
    Private m_sDataRoot As String = String.Empty
@@ -302,7 +305,7 @@ Class MainWindow
       GetPrivateProfileString(S_MACH, K_CURRMACH, "", m_sCurrMachine, m_sIniFile)
       ' Impostazione path MachIni file
       m_sMachIniFile = m_sMachinesRoot & "\" & m_sCurrMachine & "\" & m_sCurrMachine & ".ini"
-      ' Impostazione path KitIni file
+      ' Impostazione path Kit file
       m_sKitsFile = m_sMachinesRoot & "\" & m_sCurrMachine & "\" & MACHININGS_DIR & "\" & KITS_FILE
       ' Imposto tipo di chiave
 #If TRIAL Then
@@ -320,11 +323,13 @@ Class MainWindow
       Dim sNestKey As String = ""
       EgtUILib.GetPrivateProfileString(S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
       EgtSetNestKey(sNestKey)
+      Dim bNetHwKey As Boolean = ( GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
+      EgtSetNetHwKey( bNetHwKey)
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2309, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2309, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2505, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2505, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -498,6 +503,64 @@ Class MainWindow
       AddHandler m_ProdLineTimer.Tick, AddressOf OnProdLine
       ' Imposto riferimento a funzione delle textbox che disattiva scene in libreria
       EgtWPFLib.EgtTextBox.m_refScenesIsEnabled = AddressOf IsEnabledScenes
+
+      ' --------------------------------- SLAB DB -------------------------------------------------------
+      If GetPrivateProfileInt(S_SCRAPS, K_ENABLESCRAPS, 0, GetIniFile()) <> 0 Then
+         ' leggo il direttorio in cui cercare il database delle lastre
+         Dim PhotDir As String = String.Empty
+         GetPrivateProfileString(S_SCRAPS, K_PHOTODIR, "", PhotDir, GetIniFile())
+         ' verifico che esista il file "OmagPHOTOVb.sqlite" nel direttorio inidicato
+         If System.IO.File.Exists(PhotDir.Trim & "\" & DB_FILENAME) Then
+
+            If Not ManageDb.ConnectToDb(PhotDir.Trim & "\" & DB_FILENAME) Then
+               EgtOutLog("Error connecting to DB: " & PhotDir.Trim & "\" & DB_FILENAME)
+               ' coumico che il grezzo contiene un pezzo e quindi non può essere definito come grezzo
+               m_CurrentProjectPageUC.ClearMessage()
+               m_CurrentProjectPageUC.SetErrorMessage("Denied connection SlabDB")
+            Else
+               ' Impostazione direttorio per backup
+               Dim BackUpDir As String = m_sDataRoot & "\BackUp"
+               Directory.CreateDirectory(BackUpDir)
+               EgtPHOTOLib.MainData.SetConfigDir(m_sConfigDir)
+               EgtPHOTOLib.MainData.SetKeyLevel(m_nKeyLevel)
+               EgtPHOTOLib.MainData.SetKeyOptions(CInt(m_nKeyOptions))
+               EgtPHOTOLib.MainData.SetPhotoDir(PhotDir)
+               EgtPHOTOLib.MainData.SetBackUpDir(BackUpDir)
+               EgtPHOTOLib.MainData.SetIsOMagCUT(True)
+               Dim sLastBlock As String = String.Empty
+               GetPrivateProfileString(S_SCRAPS, K_LASTBLOCK, "", sLastBlock, GetIniFile())
+               If Not String.IsNullOrEmpty(sLastBlock) Then
+                  EgtPHOTOLib.MainData.SetLastBlock(sLastBlock)
+               End If
+
+               If GetPrivateProfileInt(S_SCRAPS, K_ENABLE_PRINTER, 0, GetIniFile()) = 1 Then
+                  ' leggo nome file prn (per stampante zebra)
+                  Dim m_TemplateFilePrinter As String = String.Empty
+                  GetPrivateProfileString(S_SCRAPS, K_TEMPLATE, m_sDataRoot & "\Label\Default.prn", m_TemplateFilePrinter, GetIniFile())
+                  ' leggo nome del direttorio in cui scrivere il file ini (per stampante zebra) -- solo se si desidera scrivere il file in un direttorio diverso
+                  Dim m_DatFilePrinter As String = String.Empty
+                  GetPrivateProfileString(S_SCRAPS, K_DAT, m_sDataRoot & "\Temp", m_DatFilePrinter, GetIniFile())
+                  ' leggo nome file exe (per stampante zebra)
+                  Dim m_ZebraUtilitiesExe As String = String.Empty
+                  GetPrivateProfileString(S_SCRAPS, K_ZEBRAUTILITIES, System.AppDomain.CurrentDomain.BaseDirectory & "ZebraPrinterUtilitiesR32.exe", m_ZebraUtilitiesExe, GetIniFile())
+                  EgtPHOTOLib.MainData.SetTemplateFilePrinter(m_TemplateFilePrinter)
+                  EgtPHOTOLib.MainData.SetDataFilePrinter(m_DatFilePrinter)
+                  EgtPHOTOLib.MainData.SetZebraPrinterExe(m_ZebraUtilitiesExe)
+                  EgtPHOTOLib.MainData.SetPrinterVisibility(True)
+               Else
+                  EgtPHOTOLib.MainData.SetPrinterVisibility(False)
+               End If
+
+               ' è permessa una sola istanza alla volta del programma OmagCUT -> "(1)" : "(" & nIstance.ToString & ")"
+               EgtPHOTOLib.MainData.SetUser(Environment.MachineName & "\" & Environment.UserName & " (1)")
+                  Dim sIdKey As String = String.Empty
+                  EgtGetKeyInfo(sIdKey)
+                  EgtPHOTOLib.MainData.SetKey(sIdKey)
+               End If
+            End If
+      End If
+      ' --------------------------------- SLAB DB -------------------------------------------------------
+
    End Sub
 
    Private Sub ManageSingleIstance()
@@ -546,6 +609,16 @@ Class MainWindow
       m_WorkInProgressPageUC.Prepare()
       m_WorkInProgressPageUC.UpdateTools()
 
+      Dim sVal As String = String.Empty
+      If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, m_CurrentMachine.dFsevLength)
+         m_CurrentMachine.SetFsevLength(m_CurrentMachine.dFsevLength)
+      End If
+      If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, m_CurrentMachine.dFsevPerc)
+         m_CurrentMachine.SetFsevPerc(m_CurrentMachine.dFsevPerc)
+      End If
+
       ' Se macchina fotografica abilitata, ne inizializzo il gestore
 #If Not TRIAL Then
       If GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO) Then
@@ -569,6 +642,12 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       ' disbilito Test
       TestOff()
+      ' disabilito DragRettangle
+      DragRettangleOff()
+      ' disabilito SplitCurv
+      SplitCurvWJOff()
+      ' disattivo StartCurv
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = True
@@ -617,6 +696,8 @@ Class MainWindow
             MainWindowGrid.Children.Remove(m_OptionsPageUC)
             MainWindowGrid.Children.Add(m_WorkInProgressPageUC)
             m_ActivePage = Pages.WorkInProgress
+         Case Else
+            WorkInProgressBtn.IsChecked = False
       End Select
    End Sub
 
@@ -625,6 +706,9 @@ Class MainWindow
       EgtMdbGetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -672,12 +756,17 @@ Class MainWindow
             MainWindowGrid.Children.Add(m_CurrentProjectPageUC)
             m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_DirectCutPageUC)
             m_ActivePage = Pages.DirectCut
+         Case Else
+            WorkInProgressBtn.IsChecked = False
       End Select
    End Sub
 
    Private Sub CadCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles CadCutBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -724,12 +813,17 @@ Class MainWindow
             MainWindowGrid.Children.Add(m_CurrentProjectPageUC)
             m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_CadCutPageUC)
             m_ActivePage = Pages.CadCut
+         Case Else
+            CadCutBtn.IsChecked = False
       End Select
    End Sub
 
    Private Sub FrameCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles FrameCutBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -753,8 +847,8 @@ Class MainWindow
             m_ActivePage = Pages.FrameCut
          Case Pages.Photo, Pages.RawPart, Pages.Draw, Pages.Import, Pages.CSV
             ' Pages.Simulation: quando sono nella simulazione devo uscire dalla pagina
-            CadCutBtn.IsChecked = True
-            FrameCutBtn.IsChecked = False
+            CadCutBtn.IsChecked = False
+            FrameCutBtn.IsChecked = True
          Case Pages.FrameCut
             FrameCutBtn.IsChecked = True
          Case Pages.Machine
@@ -777,12 +871,17 @@ Class MainWindow
             MainWindowGrid.Children.Add(m_CurrentProjectPageUC)
             m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_FrameCutPageUC)
             m_ActivePage = Pages.FrameCut
+         Case Else
+            If FrameCutBtn.IsEnabled Then FrameCutBtn.IsChecked = False
       End Select
    End Sub
 
    Private Sub MachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachineBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -825,12 +924,17 @@ Class MainWindow
             MainWindowGrid.Children.Remove(m_OptionsPageUC)
             MainWindowGrid.Children.Add(m_MachinePageUC)
             m_ActivePage = Pages.Machine
+         Case Else
+            MachineBtn.IsChecked = False
       End Select
    End Sub
 
    Private Sub OptionsBtn_Click(sender As Object, e As RoutedEventArgs) Handles OptionsBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -878,7 +982,7 @@ Class MainWindow
             MainWindowGrid.Children.Add(m_OptionsPageUC)
             m_ActivePage = Pages.Options
          Case Pages.Options
-            OptionsBtn.IsChecked = True
+            OptionsBtn.IsChecked = False
       End Select
    End Sub
 
@@ -983,6 +1087,19 @@ Class MainWindow
          m_CurrentProjectPageUC.SaveNamedProject()
          m_CurrentProjectPageUC.SaveProject()
       End If
+      ' Inizio la chiusura del programma (verifico di aver terminato il processo DripFeed)
+      EgtOutLog("Iniziato processo di chiusura programma")
+      m_IsClosingApplication = 1
+      Dim nCount As Integer = 0
+      While m_IsClosingApplication <> 2
+         If nCount > 5 Then
+            Exit While
+         End If
+         ' verifico che il processo DripFeed sia terminato
+         EgtOutLog("Stato chiusura programma: " & m_IsClosingApplication.ToString)
+         Thread.Sleep(100)
+         nCount += 1
+      End While
       ' Uscita
       MainWindowExit()
    End Sub
@@ -1024,19 +1141,21 @@ Class MainWindow
       ' Se non sono in tagli diretti tutto ok
       If m_ActivePage <> Pages.DirectCut Then Return True
       ' Concludo le attività in corso
-      Select Case m_DirectCutPageUC.m_ActiveDirectCutPage
-         Case DirectCutPageUC.DirectCutPages.SingleCut
-            m_DirectCutPageUC.m_SingleCut.SingleCut_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.MultipleCut
-            m_DirectCutPageUC.m_MultipleCut.MultipleCut_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.GridCut
-            m_DirectCutPageUC.m_GridCut.GridCut_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.CopyTemplate
-            m_DirectCutPageUC.m_CopyTemplate.CopyTemplate_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.FlatteningCut
-            m_DirectCutPageUC.m_FlatteningCut.FlatteningCut_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.SawTest
-            m_DirectCutPageUC.m_SawTest.SawTest_Unloaded(sender, e)
+      Select Case m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage
+         Case ControlsDirectCutUC.DirectCutPages.SingleCut
+            m_DirectCutPageUC.m_ControlsDirectCutUC.m_SingleCut.SingleCut_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.MultipleCut
+            m_DirectCutPageUC.m_ControlsDirectCutUC.m_MultipleCut.MultipleCut_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.GridCut
+            m_DirectCutPageUC.m_ControlsDirectCutUC.m_GridCut.GridCut_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.FlatteningCut
+            m_DirectCutPageUC.m_ControlsDirectCutUC.m_FlatteningCut.FlatteningCut_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.CopyTemplate
+            m_DirectCutPageUC.m_ControlsDirectCutUC1.m_CopyTemplate.CopyTemplate_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.Polishing
+            m_DirectCutPageUC.m_ControlsDirectCutUC1.m_Polishing.Polishing_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.SawTest
+            m_DirectCutPageUC.m_ControlsDirectCutUC1.m_SawTest.SawTest_Unloaded(sender, e)
       End Select
       Return True
    End Function
@@ -1068,6 +1187,15 @@ Class MainWindow
             If Not m_MachinePageUC.m_PolishingsPageUC.SaveKit() Then
                Return False
             End If
+         Case MachinePageUC.MachinePages.WaterJet
+            ' Verifica ed eventuale salvataggio Db Waterjet
+            Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+            Dim nPressedBtn As Integer = DirectCast(m_MachinePageUC.m_WaterJetPageUC.DataContext, WaterjetDbWindowVM_OmagCUT).CloseWaterjetDb_OmagCut(m_MainWindow)
+            If nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.CANCEL Then
+               Return False
+            ElseIf nPressedBtn = WaterjetDbWindowVM_OmagCUT.SaveWndBtnEnum.NO Then
+               m_MachinePageUC.m_WaterJetPageUC.WaterJetPage_Reinitialize()
+            End If
       End Select
       Return True
    End Function
@@ -1094,8 +1222,12 @@ Class MainWindow
       If m_bNCLink And m_CurrentMachine.bProdLine Then
          m_ProdLineTimer.Interval = TimeSpan.FromMilliseconds(2000)
          m_ProdLineTimer.Start()
+      ElseIf m_CurrentMachine.bDemo Then
+         m_ProdLineTimer.Interval = TimeSpan.FromMilliseconds(2000)
+         m_ProdLineTimer.Start()
       End If
-
+      ' di default attivo la pagina CadCut
+      m_ActivePage = MainWindow.Pages.CadCut
       ' seleziono il tipo di avvio
       m_CurrentProjectPageUC.StartProgram()
       ' aggiorno la grafica
@@ -1125,9 +1257,15 @@ Class MainWindow
    Private Sub OnIdle()
       ' Recupero il tipo di progetto
       Dim nPrjType As Integer = m_CurrentProjectPageUC.GetCurrentProjectType()
+      ' Verifico presenza testa H1 per lama/fresa (nel contesto principale)
+      Dim nCurrCtx As Integer = EgtGetCurrentContext()
+      EgtSetCurrentContext(m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      Dim bHeadH1 As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      EgtSetCurrentContext(nCurrCtx)
       ' Aggiorno interfaccia
       CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
-      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS)
+      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      ' DirectCutBtn.IsEnabled = bHeadH1
    End Sub
 
    ' Nomi dei file per OmagVIEW
@@ -1194,7 +1332,7 @@ Class MainWindow
                nProjInd = If(nLastProj = 1, nMaxProj, nLastProj - 1)
                nMove = 1
             End If
-         ' altrimenti forzo trasmissione ultimo inviato
+            ' altrimenti forzo trasmissione ultimo inviato
          Else
             nProjInd = If(nLastProj = 1, nMaxProj, nLastProj - 1)
             nMove = 1
@@ -1223,6 +1361,10 @@ Class MainWindow
             Exit For
          End If
       Next
+
+      ' forzo la variabile CN - aggiornando il valore dell'indice del progetto in elaborazione
+      If m_CurrentMachine.bDemo Then nVarCopy = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, GetIniFile())
+
       ' Leggo variabile con ultimo progetto mandato a OmagView
       Dim nLastCopy As Integer = GetPrivateProfileInt(S_GENERAL, K_LASTPROJTOVIEW, 0, GetIniFile())
       ' Se non nulla e diversa da ultimo copiato, verifico se eseguire la copia
@@ -1782,7 +1924,9 @@ Class MainWindow
          m_CurrentProjectPageUC.SetInfoMessage(EgtMsg(90327))        'Inseriti Nuovi Pezzi Rovinati
          Dim nPartId As Integer = EgtGetLastPart()
          For nI As Integer = 1 To nRuPartsCnt
-            EgtRemoveInfo( nPartId, INFO_PARTOK)
+            EgtRemoveInfo(nPartId, INFO_PARTOK)
+            ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+            m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
             m_CadCutPageUC.m_NestPage.StoreOnePart(nPartId, True)
             nPartId = EgtGetPrevPart(nPartId)
          Next
@@ -1868,8 +2012,30 @@ Class MainWindow
       ' deseleziono gli oggetti e spengo il bottone
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+      EgtResetMark(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       m_CadCutPageUC.m_ProjectMgr.TestBtn.IsChecked = False
-      m_CurrentProjectPageUC.m_bSelectCurv = False
+      Me.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
+   End Sub
+
+   ' spegne il comando per la mofica dei rettangoli
+   Public Sub DragRettangleOff()
+      m_CadCutPageUC.m_NestPage.DragRettanleBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedDragRettangle = False
+      ShowParkedParts()
+
+   End Sub
+
+   Public Sub SplitCurvWJOff()
+      m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedSplitCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetSplitCurvWJParam()
+
+   End Sub
+
+   Public Sub StartCurvWJOff()
+      m_CadCutPageUC.m_NestPage.StartCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedStartCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetStartCurvWJParam()
    End Sub
 
 End Class

My Project/AssemblyInfo.vb

@@ -20,9 +20,9 @@ Imports System.Windows
 <Assembly: AssemblyTitle("OmagCUTR32.exe")>
 <Assembly: AssemblyDescription("OmagCUT 32 bit")>
 #End If
-<Assembly: AssemblyCompany("EgalTech s.r.l.")>
+<Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("OmagCUT")>
-<Assembly: AssemblyCopyright("Copyright ©  2015-2021 by EgalTech s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2015-2023 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(False)>
 
@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.3.9.1")>
-<Assembly: AssemblyFileVersion("2.3.9.1")>
+<Assembly: AssemblyVersion("2.5.5.2")>
+<Assembly: AssemblyFileVersion("2.5.5.2")>

NcComm/CNCommunication.vb

@@ -2,6 +2,8 @@
 Imports System.Globalization
 Imports System.Collections.ObjectModel
 Imports EgtUILib
+Imports System.IO
+Imports System.Text
 
 Public Class CNCommunication
 
@@ -11,6 +13,8 @@ Public Class CNCommunication
    Private m_AlarmsPage As AlarmsPageUC = m_MainWindow.m_MachinePageUC.m_AlarmsPageUC
    Private m_CurrProjPage As CurrentProjectPageUC = m_MainWindow.m_CurrentProjectPageUC
 
+   Friend m_nCountRefresh As Integer = 0
+
    ' Variabile per tipologia CN
    Friend m_nNCType As Integer
 
@@ -29,6 +33,7 @@ Public Class CNCommunication
    Private m_bNewDeltaData As Boolean = True
    Private m_bNewVarData As Boolean = False
    Private m_bTimerBusy As Boolean = False
+   Private m_bTimerAxesBusy As Boolean = False
 
    Private m_IsNewConsole As Boolean = False
 
@@ -37,6 +42,7 @@ Public Class CNCommunication
 
    ' Timer
    Private m_RefreshTimer As New DispatcherTimer
+   Private m_RefreshAxesFanuc As New DispatcherTimer
 
    ' Nomi e indici degli assi macchina
    Private m_bAxesOk As Boolean = False
@@ -99,6 +105,12 @@ Public Class CNCommunication
          m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(100)
          m_RefreshTimer.Start()
       End If
+      ' solo per controllo FANUC creo un timer apposito solo per la lettura degli assi
+      If m_nNCType = 4 Then
+         AddHandler m_RefreshAxesFanuc.Tick, AddressOf RefreshAxesFanucTimer_tick
+         m_RefreshAxesFanuc.Interval = TimeSpan.FromMilliseconds(50)
+         m_RefreshAxesFanuc.Start()
+      End If
 
       ' Leggo dati sugli assi della macchina
       ReadAxesData()
@@ -115,6 +127,8 @@ Public Class CNCommunication
 
          If m_nNCType = 3 Then
             RefreshNoEvents()
+         ElseIf m_nNCType = 4 Then
+            RefreshFANUC()
          Else
             Refresh()
          End If
@@ -127,8 +141,22 @@ Public Class CNCommunication
 
    End Sub
 
+   Private Sub RefreshAxesFanucTimer_tick()
+      If Not m_bTimerAxesBusy Then
+         m_bTimerAxesBusy = True
+         m_RefreshAxesFanuc.Stop()
+
+         RefreshAxesFANUC()
+
+         m_bTimerAxesBusy = False
+         m_RefreshAxesFanuc.Start()
+      Else
+         Dim nDummy As Integer = 10
+      End If
+   End Sub
+
    Private Sub ReadAxesData()
-      ' Nomi e indici degli assi macchina
+      ' Nomi e indici degli assi macchina: definisco il nome degli assi da satampare nella pagina MachineStatusUC
       m_bAxesOk = True
       GetPrivateProfileString(S_AXES, K_L1NAME, "X", m_sA1, m_MainWindow.GetMachIniFile())
       m_nA1 = GetPrivateProfileInt(S_AXES, K_L1ID, 0, m_MainWindow.GetMachIniFile())
@@ -220,13 +248,21 @@ Public Class CNCommunication
                m_CN = New Num.NumNC
             Case 3
                m_CN = New CN_Siemens
+            Case 4
+               ' Fanuc
+               m_CN = New Fanuc.Fanuc
+               ' proveddo a sovrscrivere i datti di comunicazione PC-NC settati di default nella classe CN_Generico
+               m_MainWindow.m_CurrentMachine.InitFANUC(m_CN)
          End Select
          ' Recupero la stringa di inizializzazione della comunicazione
 
          ' definisco il tipo di varibili che devono essere scritte nl plc
          Dim sVal As String = String.Empty
-         GetPrivateProfileString(S_NCDATA, K_NEWVARIABLE, "0", sVal, m_MainWindow.GetMachIniFile())
-         m_CN.m_NewVariable = sVal <> 0
+         Dim nVal As Integer = 0
+         'GetPrivateProfileString(S_NCDATA, K_NEWVARIABLE, "0", sVal, m_MainWindow.GetMachIniFile())
+         nVal = GetPrivateProfileInt(S_NCDATA, K_NEWVARIABLE, nVal, m_MainWindow.GetMachIniFile())
+         'm_CN.m_NewVariable = sVal <> "0"
+         m_CN.m_NewVariable = (nVal <> 0)
          EgtOutLog("NewVariable=" & If(m_CN.m_NewVariable, "1", "0"))
 
          ' Recupero e imposto le variabili per i dati del CN (feed, speed,...)
@@ -276,6 +312,14 @@ Public Class CNCommunication
          m_CN.SetCnDataVar(CN_generico.CnData.LimitZ, sVal)
          GetPrivateProfileString(S_NCDATA, K_POWEROVR, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.PowerOvr, sVal)
+
+         GetPrivateProfileString(S_NCDATA, K_PARKING, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.Parking, sVal)
+         GetPrivateProfileString(S_NCDATA, K_ENABLEZONE, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.EnableZone, sVal)
+         GetPrivateProfileString(S_NCDATA, K_ENABLEPC, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.EnablePC, sVal)
+
          GetPrivateProfileString(S_NCDATA, K_VACUUMUP, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.VacuumUp, sVal)
          GetPrivateProfileString(S_NCDATA, K_VACUUMDOWN, "", sVal, m_MainWindow.GetMachIniFile())
@@ -326,18 +370,26 @@ Public Class CNCommunication
          m_CN.SetCnDataVar(CN_generico.CnData.BypassState, sVal)
 
          ' nuove variabili: stato dei nuovi pulsanti
-         m_IsNewConsole = GetPrivateProfileString(S_NCDATA, K_NEWCONSOLE, "", sVal, m_MainWindow.GetMachIniFile())
+         nVal = GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile())
+         m_IsNewConsole = (nVal = 1)
          If m_IsNewConsole Then
             GetPrivateProfileString(S_NCDATA, K_XYJOG, "", sVal, m_MainWindow.GetMachIniFile())
-            m_CN.SetCnDataVar(CN_generico.CnData.XYJog, sVal)
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.XYJog, sVal)
             GetPrivateProfileString(S_NCDATA, K_ZCJOG, "", sVal, m_MainWindow.GetMachIniFile())
-            m_CN.SetCnDataVar(CN_generico.CnData.ZCJog, sVal)
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.ZCJog, sVal)
             GetPrivateProfileString(S_NCDATA, K_ZBJOG, "", sVal, m_MainWindow.GetMachIniFile())
-            m_CN.SetCnDataVar(CN_generico.CnData.ZBJog, sVal)
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.ZBJog, sVal)
             GetPrivateProfileString(S_NCDATA, K_POWERON, "", sVal, m_MainWindow.GetMachIniFile())
-            m_CN.SetCnDataVar(CN_generico.CnData.PowerON, sVal)
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.PowerON, sVal)
+            GetPrivateProfileString(S_NCDATA, K_REMOTE, "", sVal, m_MainWindow.GetMachIniFile())
+            If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.Remote, sVal)
          End If
 
+         ' Solo per controllo FANUNC
+         GetPrivateProfileString(S_NCDATA, K_NAXES, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.nAxes, sVal)
+
+
          ' Inizializzo la comunicazione
          m_CN.Init()
 
@@ -373,6 +425,7 @@ Public Class CNCommunication
                   EgtOutLog("ProcessStart : " & """" & m_sCNSiemensHMIPath & """" & " " & sArg)
                   Process.Start(m_sCNSiemensHMIPath, sArg)
                   m_CN.m_IsSiemensOne = GetPrivateProfileInt(S_NCSIEMENS, K_ISSIEMENSONE, 0, m_MainWindow.GetMachIniFile()) > 0
+                  m_CN.m_IsActiveModeSubscription = GetPrivateProfileInt(S_NCSIEMENS, K_ISACTIVEMODESUBSCR, 0, m_MainWindow.GetMachIniFile()) > 0
                   If m_CN.m_IsSiemensOne Then
                      ' stati bottoni parte 1
                      m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.Laser), VarType.TInteger, 0)
@@ -389,6 +442,8 @@ Public Class CNCommunication
                      m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.SpeedOvr), VarType.TDouble, 1)
 
                      GetPrivateProfileString(S_NCSIEMENS, K_DBVARPATH, "", m_CN.m_DbVarPath, m_MainWindow.GetMachIniFile)
+                  ElseIf m_CN.m_IsActiveModeSubscription Then
+                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.BlowState), VarType.TInteger, 3)
                   End If
                Catch ex As Exception
                   EgtOutLog("Error starting Process -> NcLink=True type=0")
@@ -399,6 +454,17 @@ Public Class CNCommunication
                   m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Red")
                End Try
             End If
+         Case 4
+            If IsNothing(m_CN) OrElse m_CN.n_state < 2 Then
+               ' Per evitare crash con azioni verso il controllo, avvio quello di debug
+               m_nNCType = 0
+               Me.m_CN = New CN_Debug
+               m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Red")
+            Else
+               ' ATTENZIONE: durante l'inizializzazione della classe il vettore che contiene tutti gli indirizzi di memoria non è caricato
+               m_CN.b_axis_events_enable = True
+               m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_DarkGray")
+            End If
       End Select
 
       ' Assegno riferimento al CN alle diverse pagine
@@ -445,6 +511,7 @@ Public Class CNCommunication
          m_MachineStatus.DisplayPositionDelta()
       End If
 
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
       If m_CN.b_feed_changed Then
          m_CN.b_feed_changed = False
          m_MachineStatus.DisplayFeed()
@@ -471,12 +538,14 @@ Public Class CNCommunication
          'FrmMain.LblToolRad.Text = cn.Tools(0).radius.ToString
          'FrmMain.LblToolComp.Text = cn.Tools(0).comp_num.ToString
       End If
+      ' ----- FINE : lettura diretta di specifiche vaiabili -----
 
       Select Case m_nNCType
          Case 1
             If m_CN.read_active_mode() <> m_nCurrMode Then
                m_nCurrMode = m_CN.read_active_mode()
                m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+               m_CN.nMachineMode = m_nCurrMode
             End If
          Case 2
             If m_CN.nMachineMode <> m_nCurrMode Then
@@ -511,6 +580,7 @@ Public Class CNCommunication
          'End If
       End If
 
+      ' QUESTE VARIABILI NON SONO LETTE IN QUANTO NON SONO STATE CARICATE → vedere come esempio il NUM che assegna queste variabili
       ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
       If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
          If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
@@ -528,6 +598,9 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.DoorClosedChanged(m_CN.nDoorClosedState)
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LimitZChanged(m_CN.bLimitZState)
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.FiveAxisStateChanged(m_CN.Is_G24_active())
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ParkingStateChanged(m_CN.bParkingState)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ZoneStateChanged(m_CN.nEnableZone)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.PcStateChanged(m_CN.nEnablePc)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumUpChanged(m_CN.bVacuumUp)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumDownChanged(m_CN.bVacuumDown)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2UpChanged(m_CN.bVacuum2Up)
@@ -546,8 +619,14 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.CloseAllChanged(m_CN.bCloseAllState)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open123Changed(m_CN.bOpen123State)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open456Changed(m_CN.bOpen456State)
-            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
-            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            ' in assenza della configurazione delle variabili Close123 e Close456
+            If Not String.IsNullOrEmpty(m_CN.m_szCnDataVar(CN_generico.CnData.Close123State)) Then
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(Not m_CN.bOpen123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(Not m_CN.bOpen456State)
+            End If
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BlowChanged(m_CN.bBlowState)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOnChanged(m_CN.bVacuumOn)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOffChanged(m_CN.bVacuumOff)
@@ -558,6 +637,8 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.XYJogChanged(m_CN.bXYJog)
                m_MainWindow.m_DirectCutPageUC.ZCJogChanged(m_CN.bZCJog)
                m_MainWindow.m_DirectCutPageUC.ZBJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
             End If
          Else
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
@@ -571,13 +652,21 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(False)
             End If
-            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.HomeStateChanged(m_CN.bHomeState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
 
             ' Nuovi bottoni (uso joystick) per Area4
             If m_IsNewConsole Then
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.XYJogChanged(m_CN.bXYJog)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZJogChanged(m_CN.bZCJog)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
             End If
 
          End If
@@ -588,11 +677,17 @@ Public Class CNCommunication
       End If
 
       ' Nuove bottoni (Power Macchina)
-      If m_IsNewConsole AndAlso m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
-         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
-         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         If m_IsNewConsole Then
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+         End If
+         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
       End If
 
+
+
       If m_MainWindow.m_ActivePage = MainWindow.Pages.WorkInProgress Then
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
@@ -606,6 +701,183 @@ Public Class CNCommunication
             m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.FiveAxisStateChanged(False)
          End If
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
+      End If
+
+   End Sub
+
+   Private Sub RefreshAxesFANUC()
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
+      ' avvio lettura variabili da CN
+      m_CN.Geppo()
+      ' notifico valori all'interfaccia
+      m_MachineStatus.DisplayPosition()
+      m_MachineStatus.DisplayPositionDelta()
+      m_MachineStatus.DisplayFeed()
+      m_MachineStatus.DisplaySpeed()
+      m_MachineStatus.DisplayPower()
+   End Sub
+
+   Private Sub RefreshFANUC()
+      ' Copia della funzione Refresh
+
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
+      '' avvio lettura variabili da CN
+      'm_CN.Geppo()
+      '' notifico valori all'interfaccia
+      'm_MachineStatus.DisplayPosition()
+      'm_MachineStatus.DisplayPositionDelta()
+      'm_MachineStatus.DisplayFeed()
+      'm_MachineStatus.DisplaySpeed()
+      'm_MachineStatus.DisplayPower()
+      ' eventualmente carico messaggi di errore
+      ErrorList.Clear()
+      If m_CN.b_NC_error Then
+         ErrorList.Clear()
+         SyncLock m_CN
+            For Each Item As String In m_CN.sz_NC_error_messages
+               ErrorList.Add(Item)
+            Next
+         End SyncLock
+      End If
+      m_AlarmsPage.NcError()
+      ' ----- FINE  : lettura diretta di specifiche vaiabili -----
+
+      If m_CN.read_active_mode() <> CShort(m_nCurrMode) Then
+         m_nCurrMode = CInt(m_CN.read_active_mode())
+         m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+         m_CN.nMachineMode = m_nCurrMode
+      End If
+
+      ' QUESTE VARIABILI NON SONO LETTE IN QUANTO NON SONO STATE CARICATE → vedere come esempio il NUM che assegna queste variabili
+      ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
+         If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.SpindleStateChanged(m_CN.bSpindleState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LaserStateChanged(m_CN.bLaserState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LaserTracStateChanged(m_CN.bLaserTracState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.CoolantStateChanged(m_CN.bCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.InternalCoolantStateChanged(m_CN.bInternalCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ExternCoolantStateChanged(m_CN.bExternCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.CBAxesStateChanged(m_CN.bCBAxesState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.AirBlowStateChanged(m_CN.bAirBlowState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.HomeStateChanged(m_CN.bHomeState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.TableDownChanged(m_CN.bTableDownState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.DoorClosedChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LimitZChanged(m_CN.bLimitZState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.FiveAxisStateChanged(m_CN.Is_G24_active())
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ParkingStateChanged(m_CN.bParkingState)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ZoneStateChanged(m_CN.nEnableZone)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.PcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumUpChanged(m_CN.bVacuumUp)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumDownChanged(m_CN.bVacuumDown)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2UpChanged(m_CN.bVacuum2Up)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2DownChanged(m_CN.bVacuum2Down)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum0Changed(m_CN.bVacuum0)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum90Changed(m_CN.bVacuum90)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum1Changed(m_CN.bVacuum1State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2Changed(m_CN.bVacuum2State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum3Changed(m_CN.bVacuum3State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum4Changed(m_CN.bVacuum4State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum5Changed(m_CN.bVacuum5State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum6Changed(m_CN.bVacuum6State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum135Changed(m_CN.bVacuum135State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum246Changed(m_CN.bVacuum246State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.OpenAllChanged(m_CN.bOpenAllState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.CloseAllChanged(m_CN.bCloseAllState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open123Changed(m_CN.bOpen123State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open456Changed(m_CN.bOpen456State)
+            ' in assenza della configurazione delle variabili Close123 e Close456
+            If Not String.IsNullOrEmpty(m_CN.m_szCnDataVar(CN_generico.CnData.Close123State)) Then
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(Not m_CN.bOpen123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(Not m_CN.bOpen456State)
+            End If
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BlowChanged(m_CN.bBlowState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOnChanged(m_CN.bVacuumOn)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOffChanged(m_CN.bVacuumOff)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BypassChanged(m_CN.bBypassState)
+
+            ' Nuovi bottoni (uso joystick)
+            If m_IsNewConsole Then
+               m_MainWindow.m_DirectCutPageUC.XYJogChanged(m_CN.bXYJog)
+               m_MainWindow.m_DirectCutPageUC.ZCJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.ZBJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
+            End If
+         Else
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserTracStateChanged(m_CN.bLaserTracState)
+            If m_CN.Is_G24_active() Then
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(False)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(True)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(False)
+            End If
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
+
+            ' Nuovi bottoni (uso joystick) per Area4
+            If m_IsNewConsole Then
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.XYJogChanged(m_CN.bXYJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
+            End If
+
+         End If
+      End If
+
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.RawPart Then
+         m_MainWindow.m_RawPartPage.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+      End If
+
+      ' Nuove bottoni (Power Macchina)
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         If m_IsNewConsole Then
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+         End If
+         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+      End If
+
+
+
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.WorkInProgress Then
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.LaserTracStateChanged(m_CN.bLaserTracState)
+         If m_CN.Is_G24_active() Then
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ThreeAxisStateChanged(False)
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.FiveAxisStateChanged(True)
+         Else
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.FiveAxisStateChanged(False)
+         End If
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
       End If
 
    End Sub
@@ -690,12 +962,17 @@ Public Class CNCommunication
       m_MachineStatus.DisplayVar()
       'EgtOutLog("Modo attivato: " & m_CN.read_active_mode & " modo attivo: " & m_nCurrMode)
 
-      Dim TempCurrMode As Short = m_CN.read_active_mode()
-      'EgtOutLog("Machine status: " & TempCurrMode)
-      If TempCurrMode <> m_nCurrMode Then
-         'EgtOutLog("Modo attivo: " & m_CN.read_active_mode)
-         m_nCurrMode = CInt(TempCurrMode)
-         m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+      If m_nCountRefresh > 10 Then
+         Dim TempCurrMode As Short = m_CN.read_active_mode()
+         'EgtOutLog("Machine status: " & TempCurrMode)
+         If TempCurrMode <> m_nCurrMode Then
+            'EgtOutLog("Modo attivo: " & m_CN.read_active_mode)
+            m_nCurrMode = CInt(TempCurrMode)
+            m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+         End If
+         m_nCountRefresh = 0
+      Else
+         m_nCountRefresh = m_nCountRefresh + 1
       End If
 
       If m_CN.b_NC_error Then
@@ -865,28 +1142,84 @@ Public Class CNCommunication
          End If
          ' Se richiesta successiva attivazione, faccio reset
          If bActivate Then
+            EgtOutLog("Call function: DGeneralFunctions_Reset")
+            TimeSpanInit()
             m_CN.DGeneralFunctions_Reset()
+            EgtOutLog(TimeSpanEnd())
          End If
          ' Attesa opportuna
          System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nResetSendDelay)
          If m_nNCType = 1 Then
             ' Cancellazione eventuale file già presente con lo stesso nome (ignoro eventuale errore)
+            EgtOutLog("Delete_NC_prog(sNumProg)")
+            TimeSpanInit()
             m_CN.Delete_NC_prog(sNumProg)
+            EgtOutLog(TimeSpanEnd())
             ' Attesa opportuna
             System.Threading.Thread.Sleep(100)
+         ElseIf m_nNCType = 4 Then
+            ' FANUC: imposto modalità EDIT 
+            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(1) = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
          End If
+         EgtOutLog("Download_NC_prog(sCncPath, sNumProg)")
+         ' -------------- START DOWNLOAD -------------- 
+         TimeSpanInit()
          bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
          ' Attesa opportuna
          System.Threading.Thread.Sleep(100)
+         ' FANUC: genero un file 901 vuoto da aspedire, attivare; poi rispedisco il file 900
+         If m_nNCType = 4 And Not bOk Then
+            bOk = True
+            Dim sCncPath1 As String = m_MainWindow.GetCncDir() & "\PlaceHolder" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+            Dim fs As FileStream = File.Create(sCncPath1)
+            ' Add text to the file.
+            Dim info As Byte() = New UTF8Encoding(True).GetBytes(vbLf & "(PlaceHolder)")
+            fs.Write(info, 0, info.Length)
+            fs.Close()
+            bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath1, "901") = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+            If bActivate Then
+               bOk = bOk AndAlso (m_CN.ActivateProgram("901") = 0)
+               ' Attesa opportuna
+               System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+            End If
+            ' riprovo ad eseguire il programma 900
+            bOk = True
+            bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+         End If
+         EgtOutLog("Nc Type : " & m_nNCType.ToString)
+         ' AXIUM (NUM OLD): se DripFeed non esegluo attivazione programma)
+         If m_nNCType = 1 AndAlso m_CN.bIsDripFeed Then
+            ' eventauli cambi di stato sono trattati all'interno della funzione DownLoad_NC_prog
+            Return True
+         End If
+         EgtOutLog(TimeSpanEnd())
+         ' --------------  END  DOWNLOAD -------------- 
+         ' -------------- START ACTIVATE -------------- 
          ' Se richiesta attivazione
          If bActivate Then
             ' Attivazione programma
+            EgtOutLog("ActivateProgram(nNumProg)")
+            TimeSpanInit()
             bOk = bOk AndAlso (m_CN.ActivateProgram(nNumProg) = 0)
+            EgtOutLog(TimeSpanEnd())
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(100)
+            ' Attivo la modalità AUTO prima per preparar il cyclo start
+            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(0) = 0)
             ' Attesa opportuna
             System.Threading.Thread.Sleep(100)
             ' Modalità automatica
-            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(0) = 0)
+            EgtOutLog("DGeneralFunctions_WriteCncMode(0)")
+            TimeSpanInit()
+            EgtOutLog(TimeSpanEnd())
          End If
+         ' --------------  END  ACTIVATE -------------- 
          ' Messaggio con risultato
          If bOk Then
             m_CurrProjPage.SetInfoMessage(EgtMsg(90317))        'Programma CN trasmesso con successo

NcComm/CN_Siemens.vb

@@ -131,8 +131,7 @@ Public Class CN_Siemens
 
    Public Overrides Function read_active_mode() As Short
       'EgtOutLog("Modo attivo: " & M_MMFiles.SiemensRet.n_param2)
-      'Return M_MMFiles.read_active_mode()
-      If m_IsSiemensOne Then
+      If m_IsSiemensOne Or m_IsActiveModeSubscription Then
          Select Case n_data(3)
             Case 1
                Return 0
@@ -144,7 +143,10 @@ Public Class CN_Siemens
                Return 0
          End Select
       Else
-         Return CShort(M_MMFiles.SiemensRet.n_param2)
+         ' per verificare che la comunicazione funzioni correttamente
+         EgtOutLog("Modo -read_active_mode-: " & M_MMFiles.SiemensRet.n_param2.ToString)
+         Return M_MMFiles.read_active_mode()
+         'Return CShort(M_MMFiles.SiemensRet.n_param2)
       End If
    End Function