OmagCUT 3.1e2 :

- correzioni al polishing (oar si notifica che è un taglio diretto e si controlla meglio l'utensile)
- varie migliorie nei tagli diretti.

AboutBox/AboutBoxWD.xaml

@@ -1,9 +1,9 @@
 <Window x:Class="AboutBoxWD"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   FontFamily="{DynamicResource OmagCut_Font}"
-   Title="AboutBoxWD" Height="469.15" Width="511.8" WindowStyle="None" ResizeMode="NoResize"
-   AllowsTransparency="True" Background="Transparent" ShowInTaskbar="False">
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="AboutBoxWD" Height="469.15" Width="511.8" WindowStyle="None" ResizeMode="NoResize"
+        AllowsTransparency="True" Background="Transparent" ShowInTaskbar="False">
 
    <!-- Definizione dell'AboutBox -->
    <Border Style="{DynamicResource OmagCut_WindowBorder}">
@@ -23,6 +23,7 @@
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.25*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.25*"/>
@@ -35,23 +36,27 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
             <Border Name="LogoBrd" Grid.Column="1">
-               <Image Source="../Resources/AboutBoxImage.png" Stretch="Uniform"/>
+               <Image Source="../Resources/NewIcons/Logo-Egalware.png" Stretch="Uniform"/>
             </Border>
          </Grid>
          <TextBlock Name="DescriptionLbl" Grid.Column="1" Grid.Row="3" HorizontalAlignment="Center"
-            VerticalAlignment="Center" FontSize="18" />
+                    VerticalAlignment="Center" FontSize="18" />
          <TextBlock Name="VersionLbl" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center"
-            VerticalAlignment="Center" FontSize="18"/>
+                    VerticalAlignment="Center" FontSize="18"/>
          <TextBlock Name="KeyLbl" Grid.Column="1" Grid.Row="5" HorizontalAlignment="Center"
-            VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="MachineLbl" Grid.Column="1" Grid.Row="6" HorizontalAlignment="Center"
-            VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="ProjectLbl" Grid.Column="1" Grid.Row="7" HorizontalAlignment="Center"
-            VerticalAlignment="Center" FontSize="18"/>
-         <TextBlock Name="CopyrightLbl" Grid.Column="1" Grid.Row="8" HorizontalAlignment="Center"
-            VerticalAlignment="Center" FontSize="15" />
-         <Button Name="ExitBtn" Grid.Column="1" Grid.Row="10" IsCancel="True"
-            Style="{DynamicResource OmagCut_WindowGrayTextButton}" Margin="1,0"/>
+                    VerticalAlignment="Center" FontSize="18"/>
+
+         <TextBlock Name="AssStatusLbl" Grid.Column="1" Grid.Row="6" HorizontalAlignment="Center"
+                    VerticalAlignment="Center" FontSize="18"/>
+
+         <TextBlock Name="MachineLbl" Grid.Column="1" Grid.Row="7" HorizontalAlignment="Center"
+                    VerticalAlignment="Center" FontSize="18"/>
+         <TextBlock Name="ProjectLbl" Grid.Column="1" Grid.Row="8" HorizontalAlignment="Center"
+                    VerticalAlignment="Center" FontSize="18"/>
+         <TextBlock Name="CopyrightLbl" Grid.Column="1" Grid.Row="9" HorizontalAlignment="Center"
+                    VerticalAlignment="Center" FontSize="15" />
+         <Button Name="ExitBtn" Grid.Column="1" Grid.Row="11" IsCancel="True"
+                 Style="{DynamicResource OmagCut_WindowGrayTextButton}" Margin="1,0"/>
 
       </Grid>
 

AboutBox/AboutBoxWD.xaml.vb

@@ -33,10 +33,23 @@ Public Class AboutBoxWD
 #Else
       KeyLbl.Text = sKey & " - " & sOpts
 #End If
+      ' COPIATO da codice CAM5
+      Dim sAssStatus As String = " discontinued"
+      Dim nAssLeftDays As Integer
+      If EgtGetKeyAssLeftDays(nAssLeftDays) And nAssLeftDays >= 0 Then
+         If nAssLeftDays > 30 Then
+            sAssStatus = "expires within " & nAssLeftDays.ToString() & " days"
+         ElseIf nAssLeftDays > 0 Then
+            sAssStatus = "to be renewed within " & nAssLeftDays.ToString() & " days"
+         Else
+            sAssStatus = "to be renewed by today"
+         End If
+      End If
+      AssStatusLbl.Text = sAssStatus
       CopyrightLbl.Text = My.Application.Info.Copyright.ToString()
       MachineLbl.Text = "Machine : " & m_MainWindow.m_CurrentMachine.sMachineName
       ProjectLbl.Text = "Project : " & m_MainWindow.m_CurrentProjectPageUC.GetCurrentProjectName()
-      ExitBtn.Content = EgtMsg(MSG_MISSINGKEYWD + 4)          'Ok
+      ExitBtn.Content = EgtMsg(10104)          'Ok
    End Sub
 
 End Class

CAM/CamAuto.vb

@@ -21,15 +21,55 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.Add")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
+         m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage(EgtMsg(91017))
       End If
       m_MainWindow.m_CurrentProjectPageUC.ResetOrderMachiningFlag()
       Return bOk
    End Function
 
-   Friend Function AddWaterJetMachining( nOperId As Integer, ByRef nWarn As Integer) As Boolean
+   Friend Function UpdateSawing(nOperId As Integer, ByRef nNewOperation As Integer) As Boolean
+      EgtLuaCreateGlobTable("CAM")
+      SetLuaStandardCamParams()
+      EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
+      Dim nErr As Integer = 999
+      Dim bOk As Boolean = EgtLuaExecFile(m_MainWindow.GetCamAutoDir() & "\CamAuto.lua")
+      bOk = bOk AndAlso EgtLuaGetGlobIntVar("CAM.ERR", nErr) AndAlso nErr = 0
+      bOk = bOk AndAlso EgtLuaCallFunction("CAM.UpdateSawing")
+      EgtLuaGetGlobIntVar("CAM.ERR", nErr)
+      EgtLuaGetGlobIntVar("CAM.NEW_OPERATION", nNewOperation)
+      EgtLuaResetGlobVar("CAM")
+      If nErr <> 0 Then
+         bOk = False
+         EgtOutLog("Error in CamAuto : " & nErr.ToString())
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      End If
+      Return bOk
+   End Function
+
+   Friend Function ChangePvColor(nOperId As Integer, colCut As Color3d)
+      EgtLuaCreateGlobTable("CAM")
+      SetLuaStandardCamParams()
+      EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
+      Dim nErr As Integer = 999
+      Dim bOk As Boolean = EgtLuaExecFile(m_MainWindow.GetCamAutoDir() & "\CamAuto.lua")
+      bOk = bOk AndAlso EgtLuaGetGlobIntVar("CAM.ERR", nErr) AndAlso nErr = 0
+      bOk = bOk AndAlso EgtLuaExecLine("CAM.ChangePvColor( " & nOperId.ToString & ",Color3d(" & colCut.R.ToString & "," & colCut.G.ToString & "," & colCut.B.ToString & "))")
+      EgtLuaGetGlobIntVar("CAM.ERR", nErr)
+      EgtLuaResetGlobVar("CAM")
+      If nErr <> 0 Then
+         bOk = False
+         EgtOutLog("Error in CamAuto : " & nErr.ToString())
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      End If
+      Return bOk
+   End Function
+
+   Friend Function AddWaterJetMachining(nOperId As Integer, ByRef nWarn As Integer) As Boolean
       EgtLuaCreateGlobTable("CAM")
       SetLuaStandardCamParams()
       EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
@@ -39,9 +79,33 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.AddWaterJet")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+         m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
+      End If
+      Return bOk
+   End Function
+
+   Friend Function AddWaterJetMachining(LocaList As List(Of Integer), ByRef nWarn As Integer) As Boolean
+      EgtLuaCreateGlobTable("CAM")
+      SetLuaStandardCamParams()
+      For i As Integer = 0 To LocaList.Count - 1
+         EgtLuaSetGlobIntVar("CAM.TAB_OPERID." & (i + 1).ToString, LocaList(i))
+      Next
+      Dim nErr As Integer = 999
+      Dim bOk As Boolean = EgtLuaExecFile(m_MainWindow.GetCamAutoDir() & "\CamAuto.lua")
+      bOk = bOk AndAlso EgtLuaGetGlobIntVar("CAM.ERR", nErr) AndAlso nErr = 0
+      bOk = bOk AndAlso EgtLuaCallFunction("CAM.AddWaterJets")
+      EgtLuaGetGlobIntVar("CAM.ERR", nErr)
+      EgtLuaResetGlobVar("CAM")
+      If nErr > 0 Then
+         bOk = False
+         EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -55,9 +119,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.Erase")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       m_MainWindow.m_CurrentProjectPageUC.ResetOrderMachiningFlag()
       m_MainWindow.m_CurrentProjectPageUC.ResetProjectNcRestart()
@@ -73,9 +139,29 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.InvertVerticalCut")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
+      End If
+      Return bOk
+   End Function
+
+   Friend Function InvertWaterjet(nOperId As Integer) As Boolean
+      EgtLuaCreateGlobTable("CAM")
+      EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
+      Dim nErr As Integer = 999
+      Dim bOk As Boolean = EgtLuaExecFile(m_MainWindow.GetCamAutoDir() & "\CamAuto.lua")
+      bOk = bOk AndAlso EgtLuaGetGlobIntVar("CAM.ERR", nErr) AndAlso nErr = 0
+      bOk = bOk AndAlso EgtLuaCallFunction("CAM.InvertWaterjet")
+      EgtLuaGetGlobIntVar("CAM.ERR", nErr)
+      EgtLuaResetGlobVar("CAM")
+      If nErr > 0 Then
+         bOk = False
+         EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -85,6 +171,7 @@ Friend Module CamAuto
       Return ResetAllMachinings(nWarn)
    End Function
 
+   ' Ricalcola tutte le lavorazioni
    Friend Function ResetAllMachinings(ByRef nWarn As Integer) As Boolean
       ' Cancello tutte le lavorazioni
       EraseMachinings(GDB_ID.NULL)
@@ -101,6 +188,196 @@ Friend Module CamAuto
       Return True
    End Function
 
+   ' Elimina da ogni entità il nome della lavorazione asseganta
+   Friend Function RestoreDef_Machinig(Optional bOnlySideAng As Boolean = True)
+      Dim sSawingTilted As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
+      Dim bApplySawingTilted As Boolean = m_MainWindow.m_CurrentMachine.bApplySawingTilted
+      ' Controllo le geometrie dei pezzi in parcheggio
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nEntId As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         RestoreDefaultTiltedSawing(nEntId, sSawingTilted, bApplySawingTilted, bOnlySideAng)
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      ' Controllo le geometrie dei pezzi inseriti nei grezzi
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nEntId As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         RestoreDefaultTiltedSawing(nEntId, sSawingTilted, bApplySawingTilted, bOnlySideAng)
+         nIdLayerOutLoop = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP & ".orig")
+         If nIdLayerOutLoop <> GDB_ID.NULL Then
+            nEntId = EgtGetFirstInGroup(nIdLayerOutLoop)
+            RestoreDefaultTiltedSawing(nEntId, sSawingTilted, bApplySawingTilted, bOnlySideAng)
+         End If
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return True
+   End Function
+
+   ' ripristina la lavorazone indicata di default per i tagli inclinati
+   Private Sub RestoreDefaultTiltedSawing(nEntId As Integer, sSawingTilted As String, bApply As Boolean, bOnlySideAng As Boolean)
+      While nEntId <> GDB_ID.NULL
+         Dim dOrigSideAng As Double = 0
+         EgtGetInfo(nEntId, INFO_ORIG_SIDE_ANGLE, dOrigSideAng)
+         ' Se è un'entità con lavorazione inclinata
+         If Math.Abs( dOrigSideAng) > EPS_ANG_SMALL Then
+            ' Se richiesta applicazione
+            If bApply Then
+               ' Se non definita lavorazione specifica applico qualla standard
+               If String.IsNullOrEmpty(sSawingTilted) Then
+                  EgtRemoveInfo(nEntId, DEF_MACHINING_TILTED)
+               ' altrimenti applico quella specifica
+               Else
+                  EgtSetInfo(nEntId, DEF_MACHINING_TILTED, sSawingTilted)
+               End If
+           ' altrimenti rimuovo la lavorazione specifica (verrà poi applicata quella standard)
+            Else
+               EgtRemoveInfo(nEntId, DEF_MACHINING_TILTED)
+            End If
+         ' altrimenti se richiesta modifica anche delle altre
+         ElseIf Not bOnlySideAng Then
+            Dim sInfo As String = String.Empty
+            EgtGetInfo(nEntId, DEF_MACHINING, sInfo)
+            ' se esiste una lavorazione specificata allora la rimuovo
+            If Not String.IsNullOrEmpty(sInfo) Then
+               EgtRemoveInfo(nEntId, DEF_MACHINING)
+            End If
+         End If
+         nEntId = EgtGetNext(nEntId)
+      End While
+   End Sub
+
+   Friend Function ResetAllSplitCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, LAY_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, LAY_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllStartCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllBridges() As Boolean
+      Dim nBridgesGroupId As Integer = EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Bridges")
+      Return EgtErase(nBridgesGroupId)
+   End Function
+
+   Friend Function ResetAllSplitCut() As Boolean
+      Dim PartList As New List(Of Integer)
+      ' Ricerca nei grezzi dei pezzi (devono essere ricercati tra quelli presenti nei grezzi)
+      Dim bOk As Boolean = True
+      ' Recupero il numero di fasi presenti nel progetto
+      Dim nPhaseCount As Integer = EgtGetPhaseCount()
+      For nPhase As Integer = 1 To nPhaseCount
+         EgtSetCurrPhase(nPhase)
+         Dim nRawId As Integer = EgtGetFirstRawPart()
+         While nRawId <> GDB_ID.NULL
+            Dim nParId As Integer = EgtGetFirstPartInRawPart(nRawId)
+            If EgtVerifyRawPartPhase(nRawId, nPhase) Then
+               While nParId <> GDB_ID.NULL
+                  Dim nNextParId As Integer = EgtGetNextPartInRawPart(nParId)
+                  ' verifico se il pezzo passato è un taglio di sepatazione (il nome deve contenere "SpliCut")
+                  Dim sName As String = String.Empty
+                  If EgtGetName(nParId, sName) AndAlso sName.Contains(NAME_SPLIT_CUT) Then
+                     ' Rimuovo il pezzo dal grezzo
+                     If EgtRemovePartFromRawPart(nParId) Then
+                        ' Salvo l'indice del pezzo se non è stato già inserito
+                        Dim nIndex As Integer = PartList.FirstOrDefault(Function(nId) nId = nParId)
+                        If nIndex = 0 Then PartList.Add(nParId)
+                     End If
+                  End If
+                  nParId = nNextParId
+               End While
+            End If
+            nRawId = EgtGetNextRawPart(nRawId)
+         End While
+      Next
+      ' Reimposto la prima fase del progetto
+      EgtSetCurrPhase(1)
+      ' Procedo ad eliminare il pezzo
+      For Each Item As Integer In PartList
+         bOk = bOk And EgtErase(Item)
+      Next
+      Return bOk
+   End Function
+
+   Friend Function ResetAllRawPart() As Boolean
+      Dim nPhase As Integer = 1
+      Dim nOtherRaw As Integer = EgtGetFirstRawPart()
+      While nOtherRaw <> GDB_ID.NULL
+         ' se il pezzo non appartiene alla prima fase allora viene eliminato
+         If Not EgtVerifyRawPartPhase(nOtherRaw, nPhase) Then
+            Dim NextRaw As Integer = EgtGetNextRawPart(nOtherRaw)
+            EgtRemoveRawPart(nOtherRaw)
+            nOtherRaw = NextRaw
+         Else
+            nOtherRaw = EgtGetNextRawPart(nOtherRaw)
+         End If
+      End While
+      Return True
+   End Function
+
+   ' verifico che il contorno passato non sia stato separato
+   Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer)
+      Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+      While nIdMy <> GDB_ID.NULL
+         Dim nValInfo As Integer = 1
+         If EgtGetInfo(nIdMy, INFO_JOINENTITY, nValInfo) Then
+            If nValInfo = 0 Then Return False
+         End If
+         EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return True
+   End Function
+
    Friend Function RemoveFinalEmptyPhases() As Boolean
       Dim nOpeId As Integer = EgtGetLastOperation()
       While nOpeId <> GDB_ID.NULL
@@ -139,9 +416,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.UpdateAllTp")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -155,9 +434,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.Sort")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -172,9 +453,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.SpecApplyDisp")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       If ResetOrderMachiningFlag Then
          m_MainWindow.m_CurrentProjectPageUC.ResetOrderMachiningFlag()
@@ -190,7 +473,7 @@ Friend Module CamAuto
             EgtGetGroupObjs(EgtGetFirstNameInGroup(nPartId, NAME_UNDERDRILL)) = 0 Then
             Return True
          End If
-      ' Se tutti i pezzi
+         ' Se tutti i pezzi
       Else
          ' Salvo fase attualmente corrente
          Dim nOriPhase As Integer = EgtGetCurrPhase()
@@ -317,28 +600,32 @@ Friend Module CamAuto
       Return EgtRemoveOperationHome(nId)
    End Function
 
+   ' Verifico che per tutte le lavorazioni sia attrezzato l'utensile
    Friend Function VerifySetup(ByRef sMissingTools As String) As Boolean
       Dim bOk As Boolean = True
+      Dim CurrMachine As CurrentMachine = m_MainWindow.m_CurrentMachine
+      sMissingTools = ""
       Dim bIsMultiCut = (EgtGetHeadId("H101") <> GDB_ID.NULL)
-      sMissingTools = String.Empty
       Dim nId As Integer = EgtGetFirstOperation()
       While nId <> GDB_ID.NULL
          If IsValidMachining(nId) Then
             Dim nType As Integer = MCH_OY.NONE
             EgtGetMachiningParam(MCH_MP.TYPE, nType)
             Dim sTuuid As String = String.Empty
-            Dim sTool As String = String.Empty
-            Dim sTool2 As String = String.Empty
             EgtGetMachiningParam(MCH_MP.TUUID, sTuuid)
+            Dim sTool As String = String.Empty
             EgtTdbGetToolFromUUID(sTuuid, sTool)
-            If String.IsNullOrWhiteSpace( sTool) Then
+            Dim nToolType As Integer = MCH_TY.NONE
+            if EgtTdbSetCurrTool( sTool) Then EgtTdbGetCurrToolParam( MCH_TP.TYPE, nToolType)
+            If String.IsNullOrWhiteSpace(sTool) Then
                Dim sMchTool As String = ""
-               EgtGetMachiningParam( MCH_MP.TOOL, sMchTool)
+               EgtGetMachiningParam(MCH_MP.TOOL, sMchTool)
                bOk = False
                If sMissingTools.IndexOf(sMchTool) = -1 Then
                   sMissingTools = sMissingTools & sMchTool & ", "
                End If
             ElseIf nType = MCH_OY.SAWING Or nType = MCH_OY.SAWROUGHING Or nType = MCH_OY.SAWFINISHING Then
+               Dim sTool2 As String = String.Empty
                If bIsMultiCut Then
                   ' L'utensile sulla seconda testa ha lo stesso nome di quello sulla prima con suffisso "-2"
                   If sTool.Substring(sTool.Length() - 2) = "-2" Then
@@ -346,17 +633,25 @@ Friend Module CamAuto
                   End If
                   sTool2 = sTool & "-2"
                End If
-               If String.Compare(sTool, m_MainWindow.m_CurrentMachine.sCurrSaw) <> 0 AndAlso
-                  ( String.IsNullOrWhiteSpace( sTool2) OrElse String.Compare(sTool2, m_MainWindow.m_CurrentMachine.sCurrSaw) <> 0) AndAlso
-                  String.Compare(sTool, m_MainWindow.m_CurrentMachine.sCurrDripSaw) <> 0 Then
+               If CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+                  Dim bOnTC As Boolean = FindToolOnChanger( sTool)
+                  If Not bOnTC Then
+                     bOk = False
+                     If sMissingTools.IndexOf(sTool) = -1 Then
+                        sMissingTools = sMissingTools & sTool & ", "
+                     End If
+                  End If
+               ElseIf String.Compare(sTool, CurrMachine.sCurrSaw) <> 0 AndAlso
+                  (String.IsNullOrWhiteSpace(sTool2) OrElse String.Compare(sTool2, CurrMachine.sCurrSaw) <> 0) AndAlso
+                  String.Compare(sTool, CurrMachine.sCurrDripSaw) <> 0 Then
                   bOk = False
                   If sMissingTools.IndexOf(sTool) = -1 Then
                      sMissingTools = sMissingTools & sTool & ", "
                   End If
                End If
             ElseIf nType = MCH_OY.DRILLING Then
-               If String.Compare(sTool, m_MainWindow.m_CurrentMachine.sCurrDrill) <> 0 And
-                  String.Compare(sTool, m_MainWindow.m_CurrentMachine.sCurrDripDrill) <> 0 And
+               If String.Compare(sTool, CurrMachine.sCurrDrill) <> 0 And
+                  String.Compare(sTool, CurrMachine.sCurrDripDrill) <> 0 And
                   Not FindToolOnChanger(sTool) Then
                   bOk = False
                   If sMissingTools.IndexOf(sTool) = -1 Then
@@ -364,17 +659,56 @@ Friend Module CamAuto
                   End If
                End If
             ElseIf nType = MCH_OY.MILLING Then
-               ' Verifico anche le lame perchè il taglio di lama singolo sulle cornici è una lavorazione di fresatura
-               If String.Compare(sTool, m_MainWindow.m_CurrentMachine.sCurrMill) <> 0 And
-                  Not FindToolOnChanger(sTool) And
-                  String.Compare(sTool, m_MainWindow.m_CurrentMachine.sCurrSaw) <> 0 Then
+               ' Se lucidatura e frese manuali, non deve essere attrezzato l'utensile ausiliario
+               If nToolType = MCH_TY.MILL_POLISHING AndAlso
+                  ( CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL Or
+                    CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER) Then
+                  If Not String.IsNullOrWhiteSpace(CurrMachine.sCurrDrill) OrElse
+                     Not String.IsNullOrWhiteSpace(CurrMachine.sCurrMill) OrElse
+                     Not String.IsNullOrWhiteSpace(CurrMachine.sCurrMillNoTip) Then
+                     bOk = False
+                     If sMissingTools.IndexOf(sTool) = -1 Then
+                        sMissingTools = sMissingTools & sTool & ", "
+                        EgtOutLog("-->Remove Auxiliary Tool (Polishing needs None)")
+                     End If
+                  End If
+               ' Verifico sia la fresa corrente, oppure sia attrezzato oppure la lama corrente
+               ' Accetto comunque le mole per lucidatura (al momento non vengono attrezzate)
+               ElseIf String.Compare(sTool, CurrMachine.sCurrMill) <> 0 AndAlso
+                  Not FindToolOnChanger(sTool) AndAlso
+                  String.Compare(sTool, CurrMachine.sCurrSaw) <> 0 AndAlso
+                  nToolType <> MCH_TY.MILL_POLISHING Then
+                  bOk = False
+                  If sMissingTools.IndexOf(sTool) = -1 Then
+                     sMissingTools = sMissingTools & sTool & ", "
+                  End If
+               End If
+            ElseIf nType = MCH_OY.POCKETING Then
+               ' Se lucidatura e frese manuali, non deve essere attrezzato l'utensile ausiliario
+               If nToolType = MCH_TY.MILL_POLISHING AndAlso
+                  ( CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL Or
+                    CurrMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER) Then
+                  If Not String.IsNullOrWhiteSpace(CurrMachine.sCurrDrill) OrElse
+                     Not String.IsNullOrWhiteSpace(CurrMachine.sCurrMill) OrElse
+                     Not String.IsNullOrWhiteSpace(CurrMachine.sCurrMillNoTip) Then
+                     bOk = False
+                     If sMissingTools.IndexOf(sTool) = -1 Then
+                        sMissingTools = sMissingTools & sTool & ", "
+                        EgtOutLog("-->Remove Auxiliary Tool (Polishing needs None)")
+                     End If
+                  End If
+               ' Verifico sia la mola da scasso corrente, oppure sia attrezzato
+               ' Accetto comunque le mole per lucidatura (al momento non vengono attrezzate)
+               ElseIf String.Compare(sTool, CurrMachine.sCurrMillNoTip) <> 0 AndAlso
+                  Not FindToolOnChanger(sTool) AndAlso
+                  nToolType <> MCH_TY.MILL_POLISHING Then
                   bOk = False
                   If sMissingTools.IndexOf(sTool) = -1 Then
                      sMissingTools = sMissingTools & sTool & ", "
                   End If
                End If
             ElseIf nType = MCH_OY.WATERJETTING Then
-               If String.Compare(sTool, m_MainWindow.m_CurrentMachine.sCurrWaterJet) <> 0 And
+               If String.Compare(sTool, CurrMachine.sCurrWaterJet) <> 0 And
                   Not FindToolOnChanger(sTool) Then
                   bOk = False
                   If sMissingTools.IndexOf(sTool) = -1 Then
@@ -385,6 +719,8 @@ Friend Module CamAuto
          End If
          nId = EgtGetNextOperation(nId)
       End While
+      Dim index As Integer = sMissingTools.LastIndexOf(","c)
+      sMissingTools = If(index >= 0, sMissingTools.Remove(index, 1), sMissingTools)
       Return bOk
    End Function
 
@@ -405,15 +741,44 @@ Friend Module CamAuto
       Return False
    End Function
 
+   Friend Function CanChangeSaw() As Boolean
+      ' Se non è TC anche per lama, non è possibile
+      If m_MainWindow.m_CurrentMachine.MountedToolConfig <> CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+         Return False
+      End If
+      ' Se è nei TC manuali con posizione T0, non è possibile
+      For Each ToolPosition As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+         If m_MainWindow.m_CurrentMachine.sCurrSaw = ToolPosition.sTool And ToolPosition.sName = "T0" Then
+            Return False
+         End If
+      Next
+      ' Si può cambiare
+      Return True
+   End Function
+
+   Friend Function CanChangeTool() As Boolean
+      ' Se solo lama, non è possibile
+      If m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.SAW Then
+         Return False
+      End If
+      ' Se non è TC anche per lama, sempre possibile
+      If m_MainWindow.m_CurrentMachine.MountedToolConfig <> CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW Then
+         Return True
+      End If
+      ' Altrimenti possibile solo se si può cambiare lama
+      Return CanChangeSaw()
+   End Function
+
    Friend Function TestAllMachiningsForStrict() As Boolean
       Dim bModified As Boolean = False
       ' Affondamento ridotto
       Dim dReducedDepth As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_REDUCEDDEPTH, 1, m_MainWindow.GetMachIniFile())
       ' Ciclo sulle lavorazioni
       Dim nOperId As Integer = EgtGetFirstOperation()
+      Dim LocalListOperId As New List(Of Integer)
       While nOperId <> GDB_ID.NULL
          ' verifico sia una lavorazione valida di taglio con lama
-         If IsValidMachining( nOperId) And EgtGetOperationType( nOperId) = MCH_OY.SAWING Then
+         If IsValidMachining(nOperId) And EgtGetOperationType(nOperId) = MCH_OY.SAWING Then
             ' verifica interferenza
             Dim nFlag As Integer = FMI_TYPE.NONE
             If Not VerifyComposedMachining(nOperId, nFlag) Then
@@ -425,12 +790,14 @@ Friend Module CamAuto
                ' se abilitato e attivo waterjet, lo aggiungo per completare il taglio
                If m_MainWindow.m_CurrentMachine.WaterJettingActive Then
                   Dim nWarn As Integer = 0
-                  AddWaterJetMachining(nOperId, nWarn)
+                  LocalListOperId.Add(nOperId)
+                  'AddWaterJetMachining(nOperId, nWarn)
                End If
             End If
          End If
          nOperId = EgtGetNextOperation(nOperId)
       End While
+      If LocalListOperId.Count > 0 Then AddWaterJetMachining(LocalListOperId, 0)
       Return bModified
    End Function
 
@@ -534,8 +901,8 @@ Friend Module CamAuto
          If nOriLeadIn <> MCH_SAW_LI.STRICT Then
             EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.STRICT)
             Dim dUserAddLen As Double = 0
-            EgtGetInfo( nMchId, INFO_MCH_USER_SAL, dUserAddLen)
-            EgtRemoveInfo( nMchId, INFO_MCH_USER_SAL)
+            EgtGetInfo(nMchId, INFO_MCH_USER_SAL, dUserAddLen)
+            EgtRemoveInfo(nMchId, INFO_MCH_USER_SAL)
             Dim dAddLen As Double = 0
             EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
             EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen - dUserAddLen - dSafeLen)
@@ -554,8 +921,8 @@ Friend Module CamAuto
          If nOriLeadOut <> MCH_SAW_LO.STRICT Then
             EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.STRICT)
             Dim dUserAddLen As Double = 0
-            EgtGetInfo( nMchId, INFO_MCH_USER_EAL, dUserAddLen)
-            EgtRemoveInfo( nMchId, INFO_MCH_USER_EAL)
+            EgtGetInfo(nMchId, INFO_MCH_USER_EAL, dUserAddLen)
+            EgtRemoveInfo(nMchId, INFO_MCH_USER_EAL)
             Dim dAddLen As Double = 0
             EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
             EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen - dUserAddLen - dSafeLen)
@@ -674,6 +1041,9 @@ Friend Module CamAuto
       End If
       ' Lo sposto dalla lavorazione al pezzo
       Dim nId As Integer = EgtGetFirstInGroup(nMchPvId)
+
+      If nId = GDB_ID.NULL Then Return False
+
       While nId <> GDB_ID.NULL
          EgtRelocateGlob(nId, nPartPvId)
          nId = EgtGetFirstInGroup(nMchPvId)
@@ -709,9 +1079,9 @@ Friend Module CamAuto
    Friend Function RemoveAllExitPreCuts() As Boolean
       Dim nOperId As Integer = EgtGetFirstOperation()
       While nOperId <> GDB_ID.NULL
-         Dim nNextOperId As Integer = EgtGetNextOperation( nOperId)
-         If EgtGetType( nOperId) <> MCH_OY.DISP AndAlso EgtExistsInfo(nOperId, INFO_MCH_EPC) Then
-            EgtRemoveOperation( nOperId)
+         Dim nNextOperId As Integer = EgtGetNextOperation(nOperId)
+         If EgtGetType(nOperId) <> MCH_OY.DISP AndAlso EgtExistsInfo(nOperId, INFO_MCH_EPC) Then
+            EgtRemoveOperation(nOperId)
          End If
          nOperId = nNextOperId
       End While
@@ -719,10 +1089,13 @@ Friend Module CamAuto
    End Function
 
    Private Function SetLuaStandardCamParams(Optional bDripOk As Boolean = True) As Boolean
+      Dim sMaterial As String = m_MainWindow.m_CurrentMachine.CurrMat.sName
       Dim sSawMch As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sSawTiltedMch As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
       Dim sMillMch As String = m_MainWindow.m_CurrentMachine.sCurrMilling
       Dim sDrillMch As String = m_MainWindow.m_CurrentMachine.sCurrDrilling
       Dim sWaterJetMch As String = m_MainWindow.m_CurrentMachine.sCurrWaterJetting
+      Dim sWaterJetQual As String = m_MainWindow.m_CurrentMachine.sCurrWaterJettingQuality
       Dim sPocketMch As String = m_MainWindow.m_CurrentMachine.sCurrPocketing
       Dim sDripSawMch As String = If(bDripOk, m_MainWindow.m_CurrentMachine.sCurrDripSawing, "")
       Dim sDripDrillMch As String = If(bDripOk, m_MainWindow.m_CurrentMachine.sCurrDripDrilling, "")
@@ -735,11 +1108,16 @@ Friend Module CamAuto
       Dim bMillingOnCorners As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
       Dim bMillingOnSinks As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
       Dim dMillingShort As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
+      Dim bWaterjetOptimize As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_WATERJET_OPTIMIZE, 0, m_MainWindow.GetMachIniFile()) <> 0)
+      Dim bWaterjetOnSinks As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_WATERJET_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
+      EgtLuaSetGlobStringVar("CAM.MATERIAL", sMaterial)
       EgtLuaSetGlobStringVar("CAM.SAWMCH", sSawMch)
+      EgtLuaSetGlobStringVar("CAM.SAWTILTEDMCH", sSawTiltedMch)
       EgtLuaSetGlobStringVar("CAM.MILLMCH", sMillMch)
       EgtLuaSetGlobStringVar("CAM.DRILLMCH", sDrillMch)
       EgtLuaSetGlobStringVar("CAM.POCKETMCH", sPocketMch)
       EgtLuaSetGlobStringVar("CAM.WATERJETMCH", sWaterJetMch)
+      EgtLuaSetGlobStringVar("CAM.WATERJETQLTY", sWaterJetQual)
       EgtLuaSetGlobStringVar("CAM.DRIPSAWMCH", sDripSawMch)
       EgtLuaSetGlobStringVar("CAM.DRIPDRILLMCH", sDripDrillMch)
       EgtLuaSetGlobNumVar("CAM.REDUCEDDEPTH", dReducedDepth)
@@ -751,6 +1129,8 @@ Friend Module CamAuto
       EgtLuaSetGlobBoolVar("CAM.MILLINGONCORNERS", bMillingOnCorners)
       EgtLuaSetGlobBoolVar("CAM.MILLINGONSINKS", bMillingOnSinks)
       EgtLuaSetGlobNumVar("CAM.MILLINGSHORT", dMillingShort)
+      EgtLuaSetGlobBoolVar("CAM.WATERJETOPTIMIZE", bWaterjetOptimize)
+      EgtLuaSetGlobBoolVar("CAM.WATERJETONSINKS", bWaterjetOnSinks)
       EgtLuaSetGlobNumVar("CAM.RAWHEIGHT", GetRawHeight())
       EgtLuaSetGlobNumVar("CAM.REGROT", GetRegistrationRotation())
       Return True
@@ -760,20 +1140,24 @@ Friend Module CamAuto
       If EgtGetTableId(MAIN_TAB) = GDB_ID.NULL Then Return 0
       If EgtGetTableId(SECOND_TAB) = GDB_ID.NULL Then Return 1
       If EgtGetTableId(THIRD_TAB) = GDB_ID.NULL Then Return 2
-      Return 3
+      If EgtGetTableId(FORTH_TAB) = GDB_ID.NULL Then Return 3
+      Return 4
    End Function
 
    Friend Function GetTableName(nInd As Integer) As String
       If nInd = 1 Then Return MAIN_TAB
       If nInd = 2 Then Return SECOND_TAB
       If nInd = 3 Then Return THIRD_TAB
+      If nInd = 4 Then Return FORTH_TAB
       Return ""
    End Function
 
    Friend Function GetCurrentTable() As Integer
       Dim sTabName As String = MAIN_TAB
       EgtGetTableName(sTabName)
-      If sTabName = THIRD_TAB Then
+      If sTabName = FORTH_TAB Then
+         Return 4
+      ElseIf sTabName = THIRD_TAB Then
          Return 3
       ElseIf sTabName = SECOND_TAB Then
          Return 2
@@ -894,13 +1278,13 @@ Friend Module CamAuto
       Dim nRawId As Integer = GetCurrentRaw()
       If nRawId = GDB_ID.NULL Then Return False
       ' Se non ci sono pezzi, esco
-      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart( nRawId)
+      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart(nRawId)
       If nPart1Id = GDB_ID.NULL Then Return True
       ' Verifico se cornice curva
       Dim nDir As Integer = 0
       EgtGetInfo(nPart1Id, INFO_FRAME_DIR, nDir)
-      Dim bSwap As Boolean = ( nDir = 0)
-      Dim bCurved As Boolean = ( nDir >= 2)
+      Dim bSwap As Boolean = (nDir = 0)
+      Dim bCurved As Boolean = (nDir >= 2)
       ' Recupero la lavorazione corrente di sgrossatura con lama
       Dim sCurrSawRoughing = m_MainWindow.m_CurrentMachine.sCurrSawRoughing
       If String.IsNullOrEmpty(sCurrSawRoughing) Then Return True
@@ -927,8 +1311,8 @@ Friend Module CamAuto
       ' Imposto la geometria
       EgtSetMachiningGeometry(vId)
       ' Imposto trim iniziale e finale
-      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If( bSwap, -dTrimEnd, -dTrimStart))
-      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If( bSwap, -dTrimStart, -dTrimEnd))
+      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If(bSwap, -dTrimEnd, -dTrimStart))
+      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If(bSwap, -dTrimStart, -dTrimEnd))
       ' Se cornice curva, imposto SCC
       If bCurved Then EgtSetMachiningParam(MCH_MP.SOLCHOICETYPE, MCH_SCC.ADIR_NEAR)
       ' Applico la lavorazione
@@ -943,13 +1327,13 @@ Friend Module CamAuto
       Dim nRawId As Integer = GetCurrentRaw()
       If nRawId = GDB_ID.NULL Then Return False
       ' Se non ci sono pezzi, esco
-      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart( nRawId)
+      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart(nRawId)
       If nPart1Id = GDB_ID.NULL Then Return True
       ' Verifico se cornice curva
       Dim nDir As Integer = 0
-      EgtGetInfo( nPart1Id, INFO_FRAME_DIR, nDir)
-      Dim bSwap As Boolean = ( nDir = 0)
-      Dim bCurved As Boolean = ( nDir >= 2)
+      EgtGetInfo(nPart1Id, INFO_FRAME_DIR, nDir)
+      Dim bSwap As Boolean = (nDir = 0)
+      Dim bCurved As Boolean = (nDir >= 2)
       ' Recupero la lavorazione corrente di finitura con lama
       Dim sCurrSawFinishing = m_MainWindow.m_CurrentMachine.sCurrSawFinishing
       If String.IsNullOrEmpty(sCurrSawFinishing) Then Return True
@@ -986,8 +1370,8 @@ Friend Module CamAuto
       ' Imposto la geometria
       EgtSetMachiningGeometry(vId)
       ' Imposto trim iniziale e finale
-      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If( bSwap, -dTrimEnd, -dTrimStart))
-      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If( bSwap, -dTrimStart, -dTrimEnd))
+      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If(bSwap, -dTrimEnd, -dTrimStart))
+      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If(bSwap, -dTrimStart, -dTrimEnd))
       ' Se cornice curva, imposto SCC
       If bCurved Then EgtSetMachiningParam(MCH_MP.SOLCHOICETYPE, MCH_SCC.ADIR_NEAR)
       ' Applico la lavorazione
@@ -1002,13 +1386,13 @@ Friend Module CamAuto
       Dim nRawId As Integer = GetCurrentRaw()
       If nRawId = GDB_ID.NULL Then Return False
       ' Se non ci sono pezzi, esco
-      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart( nRawId)
+      Dim nPart1Id As Integer = EgtGetFirstPartInRawPart(nRawId)
       If nPart1Id = GDB_ID.NULL Then Return True
       ' Verifico se cornice curva
       Dim nDir As Integer = 0
       EgtGetInfo(nPart1Id, INFO_FRAME_DIR, nDir)
-      Dim bSwap As Boolean = ( nDir = 0)
-      Dim bCurved As Boolean = ( nDir >= 2)
+      Dim bSwap As Boolean = (nDir = 0)
+      Dim bCurved As Boolean = (nDir >= 2)
       ' Recupero la lavorazione corrente di spatolatura con lama
       Dim sCurrSawSideFinishing = m_MainWindow.m_CurrentMachine.sCurrSawSideFinishing
       If String.IsNullOrEmpty(sCurrSawSideFinishing) Then Return True
@@ -1029,8 +1413,8 @@ Friend Module CamAuto
       ' Imposto la geometria
       EgtSetMachiningGeometry(vId)
       ' Imposto trim iniziale e finale
-      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If( bSwap, -dTrimEnd, -dTrimStart))
-      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If( bSwap, -dTrimStart, -dTrimEnd))
+      EgtSetMachiningParam(MCH_MP.STARTADDLEN, If(bSwap, -dTrimEnd, -dTrimStart))
+      EgtSetMachiningParam(MCH_MP.ENDADDLEN, If(bSwap, -dTrimStart, -dTrimEnd))
       ' Se cornice curva, imposto SCC
       If bCurved Then EgtSetMachiningParam(MCH_MP.SOLCHOICETYPE, MCH_SCC.ADIR_NEAR)
       ' Applico la lavorazione
@@ -1239,7 +1623,7 @@ Friend Module CamAuto
       EgtSetMachiningParam(MCH_MP.STEPTYPE, If(nStepType = MCH_SAW_ST.ONEWAY, MCH_MIL_ST.ONEWAY, MCH_MIL_ST.ZIGZAG))
       If dStep >= EPS_SMALL And dStep < dElev Then
          EgtSetMachiningParam(MCH_MP.STEP_, dStep)
-         EgtSetMachiningParam(MCH_MP.USERNOTES, "SideElev=" & dElev.ToString() & ";")
+         EgtSetMachiningParam(MCH_MP.USERNOTES, "SideElev=" & DoubleToString( dElev, 1) & ";")
       End If
       ' Recupero la distanza di sicurezza
       Dim dSafeZ As Double = m_MainWindow.m_CurrentMachine.dSafeZ()

CadCuts/CSVFile.vb

@@ -1,5 +1,5 @@
 Imports EgtUILib
-
+Imports System.IO
 
 Friend Module CSVFile
 
@@ -7,6 +7,7 @@ Friend Module CSVFile
 
    '-----------------------------------------------------------------------------------------------
    Friend Class CsvPart
+      Public m_sPath As String = String.Empty
       Public m_sName As String = String.Empty
       Public m_sOrd As String = String.Empty
       Public m_sDist As String = String.Empty
@@ -19,8 +20,20 @@ Friend Module CSVFile
       Public m_dDimX As Double = 0
       Public m_dDimY As Double = 0
       Public m_dTh As Double = 0
+      Public m_dAng1 As Double = 0
+      Public m_dHeel1 As Double = 0
+      Public m_dAng2 As Double = 0
+      Public m_dHeel2 As Double = 0
+      Public m_dAng3 As Double = 0
+      Public m_dHeel3 As Double = 0
+      Public m_dAng4 As Double = 0
+      Public m_dHeel4 As Double = 0
       Public m_nOriInd As Integer = 0
       Public m_nId As Integer = GDB_ID.NULL
+      ' definsco il riferimento al gruppo
+      Public m_sRefGuid As String = System.Guid.NewGuid.ToString
+      ' definisco il colore del gruppo che sto inserendo
+      Public m_cColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
    End Class
 
    '-----------------------------------------------------------------------------------------------
@@ -51,6 +64,7 @@ Friend Module CSVFile
       For i As Integer = 1 To nNbr
          Dim OnePart As New CsvPart
          Dim sN As String = i.ToString()
+         OnePart.m_sPath = sFile
          EgtLuaGetGlobStringVar("CSV.NAME" & sN, OnePart.m_sName)
          OnePart.m_bActive = True
          EgtLuaGetGlobStringVar("CSV.ORD" & sN, OnePart.m_sOrd)
@@ -62,7 +76,18 @@ Friend Module CSVFile
          EgtLuaGetGlobNumVar("CSV.DIMX" & sN, OnePart.m_dDimX)
          EgtLuaGetGlobNumVar("CSV.DIMY" & sN, OnePart.m_dDimY)
          EgtLuaGetGlobNumVar("CSV.TH" & sN, OnePart.m_dTh)
+         EgtLuaGetGlobNumVar("CSV.A1_" & sN, OnePart.m_dAng1)
+         EgtLuaGetGlobNumVar("CSV.H1_" & sN, OnePart.m_dHeel1)
+         EgtLuaGetGlobNumVar("CSV.A2_" & sN, OnePart.m_dAng2)
+         EgtLuaGetGlobNumVar("CSV.H2_" & sN, OnePart.m_dHeel2)
+         EgtLuaGetGlobNumVar("CSV.A3_" & sN, OnePart.m_dAng3)
+         EgtLuaGetGlobNumVar("CSV.H3_" & sN, OnePart.m_dHeel3)
+         EgtLuaGetGlobNumVar("CSV.A4_" & sN, OnePart.m_dAng4)
+         EgtLuaGetGlobNumVar("CSV.H4_" & sN, OnePart.m_dHeel4)
          OnePart.m_nOriInd = i
+         If OnePart.m_nCount > 1 Then
+            OnePart.m_sRefGuid = System.Guid.NewGuid.ToString
+         End If
          ' inserisco in lista
          CsvPartList.Add(OnePart)
       Next
@@ -123,7 +148,9 @@ Friend Module CSVFile
             Else
                Dim sItems() As String = sLine.Split("=".ToCharArray)
                If sItems.Count() >= 2 Then
-                  If sItems(0) = "Nam" Then
+                  If sItems(0) = "Path" Then
+                     OnePart.m_sPath = sItems(1)
+                  ElseIf sItems(0) = "Nam" Then
                      OnePart.m_sName = sItems(1)
                   ElseIf sItems(0) = "Ord" Then
                      OnePart.m_sOrd = sItems(1)
@@ -147,8 +174,26 @@ Friend Module CSVFile
                      StringToDouble(sItems(1), OnePart.m_dDimY)
                   ElseIf sItems(0) = "Th" Then
                      StringToDouble(sItems(1), OnePart.m_dTh)
+                  ElseIf sItems(0) = "A1" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng1)
+                  ElseIf sItems(0) = "H1" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel1)
+                  ElseIf sItems(0) = "A2" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng2)
+                  ElseIf sItems(0) = "H2" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel2)
+                  ElseIf sItems(0) = "A3" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng3)
+                  ElseIf sItems(0) = "H3" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel3)
+                  ElseIf sItems(0) = "A4" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng4)
+                  ElseIf sItems(0) = "H4" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel4)
                   ElseIf sItems(0) = "OIn" Then
                      StringToInt(sItems(1), OnePart.m_nOriInd)
+                  ElseIf sItems(0) = "Guid" Then
+                     OnePart.m_sRefGuid = sItems(1).Trim
                   End If
                End If
             End If
@@ -176,6 +221,7 @@ Friend Module CSVFile
          For i As Integer = 1 To CsvPartList.Count()
             Dim CurrPart As CsvPart = CsvPartList(i - 1)
             Writer.WriteLine("[P" & i.ToString() & "]")
+            Writer.WriteLine("Path=" & CurrPart.m_sPath)
             Writer.WriteLine("Nam=" & CurrPart.m_sName)
             Writer.WriteLine("Ord=" & CurrPart.m_sOrd)
             Writer.WriteLine("Dist=" & CurrPart.m_sDist)
@@ -188,20 +234,53 @@ Friend Module CSVFile
             Writer.WriteLine("DX=" & DoubleToString(CurrPart.m_dDimX, 4))
             Writer.WriteLine("DY=" & DoubleToString(CurrPart.m_dDimY, 4))
             Writer.WriteLine("Th=" & DoubleToString(CurrPart.m_dTh, 4))
+            Writer.WriteLine("A1=" & DoubleToString(CurrPart.m_dAng1, 4))
+            Writer.WriteLine("H1=" & DoubleToString(CurrPart.m_dHeel1, 4))
+            Writer.WriteLine("A2=" & DoubleToString(CurrPart.m_dAng2, 4))
+            Writer.WriteLine("H2=" & DoubleToString(CurrPart.m_dHeel2, 4))
+            Writer.WriteLine("A3=" & DoubleToString(CurrPart.m_dAng3, 4))
+            Writer.WriteLine("H3=" & DoubleToString(CurrPart.m_dHeel3, 4))
+            Writer.WriteLine("A4=" & DoubleToString(CurrPart.m_dAng4, 4))
+            Writer.WriteLine("H4=" & DoubleToString(CurrPart.m_dHeel4, 4))
             Writer.WriteLine("OIn=" & CurrPart.m_nOriInd.ToString())
+            Writer.WriteLine("Guid=" & CurrPart.m_sRefGuid)
          Next
          ' Terminatore
          Writer.WriteLine("[END]")
          ' Chiudo file
          Writer.Close()
          Return True
-      ' Errore
+         ' Errore
       Catch ex As Exception
          EgtOutLog("CSV List error writing " & sFile)
          Return False
       End Try
    End Function
 
+   ' dato l'elenco completo dei file salvo ogni singolo epl 
+   Friend Function WriteCsvMergePartList(CsvPartList As List(Of CsvPart)) As Boolean
+      Dim bOk As Boolean = True
+      Dim LocalPartList As New List(Of CsvPart)
+      Dim Index As Integer = 0
+      ' devo dividere la lista in tante parti quanti sono i file che lo costituiscono
+      While Index < CsvPartList.Count
+         Dim CurrFile As String = CsvPartList(Index).m_sPath
+         Dim sFile As String = Path.ChangeExtension(CurrFile, ".epl")
+         LocalPartList.Clear()
+         While CurrFile = CsvPartList(Index).m_sPath
+            LocalPartList.Add(CsvPartList(Index))
+            Index += 1
+            ' se terminata la lista
+            If Index = CsvPartList.Count Then
+               Exit While
+            End If
+         End While
+         ' salvo l'elenco corrente
+         bOk = WriteCsvPartList(sFile, CurrFile, LocalPartList) And bOk
+      End While
+      Return bOk
+   End Function
+
    Friend Function RemoveNotToNestParts(ByRef CsvPartList As List(Of CsvPart)) As Boolean
       For i As Integer = CsvPartList.Count() - 1 To 0 Step -1
          If CsvPartList(i).m_nToNest = 0 Then

CadCuts/CSVPage.xaml

@@ -1,11 +1,11 @@
 <UserControl x:Class="CSVPage"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   xmlns:self="clr-namespace:OmagCUT.TreeViewItem"
-   mc:Ignorable="d" 
-   d:DesignHeight="853.3" d:DesignWidth="1280">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:self="clr-namespace:OmagCUT.TreeViewItem"
+             mc:Ignorable="d" 
+             d:DesignHeight="853.3" d:DesignWidth="1280">
 
    <!-- Definizione della SplitPage -->
    <Grid Name="SplitPageGrid" >
@@ -27,7 +27,7 @@
          </Grid.ColumnDefinitions>
 
          <!--Griglia per oscurare i bottoni della pagina sottostante-->
-            <Grid Background="{DynamicResource OmagCut_Gray}">
+         <Grid Background="{DynamicResource OmagCut_Gray}">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
@@ -49,7 +49,7 @@
 
          <Label Name="CsvPathTxBl" Grid.Row="1" Background="White" FontSize="16" VerticalAlignment="Center" Padding="2,5,0,5"/>
 
-            <TreeView Name="PartsTreeView" Grid.Row="2" Background="{DynamicResource OmagCut_TreeViewBackGroundColor}">
+         <TreeView Name="PartsTreeView" Grid.Row="2" Background="{StaticResource OmagCut_TreeViewGradientGray}">
             <TreeView.Resources>
                <!--Modifico HierarchicalDataTemplate del CathegoryItem per poter inserire immagine e testo e per -->
                <!--renderlo apribile con un solo click -->
@@ -62,7 +62,7 @@
                      </Grid.ColumnDefinitions>
 
                      <Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Width="32" Margin="0,8,6,4" />
-                     <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="10" />
+                     <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="10" Foreground="Black" />
 
                   </Grid>
 
@@ -123,7 +123,10 @@
                         </Setter>
                         <Style.Triggers>
                            <DataTrigger Binding="{Binding bIsActive}" Value="False">
-                              <Setter Property="Foreground" Value="{StaticResource OmagCut_LightGray}"/>
+                              <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                           </DataTrigger>
+                           <DataTrigger Binding="{Binding bIsActive}" Value="True">
+                              <Setter Property="Foreground" Value="Black"/>
                            </DataTrigger>
                         </Style.Triggers>
                      </Style>
@@ -131,18 +134,25 @@
                </HierarchicalDataTemplate>
                <!--Modifico DataTemplate del ToolItem per poter inserire immagine e testo-->
                <DataTemplate DataType="{x:Type self:PartCustomItem}">
-                  <Grid Width="246" Margin="0,5,0,5" HorizontalAlignment="Right">
+                  <Grid Width="234.8" Margin="0,5,0,5" HorizontalAlignment="Right">
                      <Grid.ColumnDefinitions>
                         <ColumnDefinition Width="1*"/>
                         <ColumnDefinition Width="60"/>
                         <ColumnDefinition Width="1*"/>
                      </Grid.ColumnDefinitions>
 
-                     <TextBlock Grid.Column="0" Text="{Binding Name}" Height="18" FontSize="14" HorizontalAlignment="Right"/>
-                     <TextBlock Grid.Column="1" Text="{Binding sText1}" Height="18" FontSize="14" HorizontalAlignment="Center"/>
-                     <TextBlock Grid.Column="2" Text="{Binding sText2}" Height="18" FontSize="14" HorizontalAlignment="Left"/>
+                     <TextBlock x:Name="TbName"  Grid.Column="0" Text="{Binding Name}" Height="18" FontSize="14" HorizontalAlignment="Right"/>
+                     <TextBlock x:Name="TbText1" Grid.Column="1" Text="{Binding sText1}" Height="18" FontSize="14" HorizontalAlignment="Center"/>
+                     <TextBlock x:Name="TbText2" Grid.Column="2" Text="{Binding sText2}" Height="18" FontSize="14" HorizontalAlignment="Left"/>
 
                   </Grid>
+                  <DataTemplate.Triggers>
+                     <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                        <Setter TargetName="TbName" Property="TextDecorations" Value="Strikethrough" />
+                        <Setter TargetName="TbText1" Property="TextDecorations" Value="Strikethrough" />
+                        <Setter TargetName="TbText2" Property="TextDecorations" Value="Strikethrough" />
+                     </DataTrigger>
+                  </DataTemplate.Triggers>
                </DataTemplate>
             </TreeView.Resources>
 
@@ -218,15 +228,15 @@
             </Grid.ColumnDefinitions>
 
             <Button Name="NewBtn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowIconButton}">
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
                <Image Source="{DynamicResource CsvNewImg}" Width="65" Height="65" HorizontalAlignment="Center" VerticalAlignment="Center" />
             </Button>
             <Button Name="OpenBtn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowIconButton}">
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
                <Image Source="{DynamicResource CsvOpenImg}" Width="65" Height="65" HorizontalAlignment="Center" VerticalAlignment="Center" />
             </Button>
             <Button Name="RuinedPartsBtn" Grid.Column="2"
-               Style="{DynamicResource OmagCut_YellowIconButton}">
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
                <Image Source="{DynamicResource CsvRuinedPartsImg}" Width="65" Height="65" HorizontalAlignment="Center" VerticalAlignment="Center" />
             </Button>
 
@@ -247,22 +257,19 @@
          </Grid.ColumnDefinitions>
 
          <ToggleButton Name="PlusBtn" Grid.Column="0"
-            Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                       Style="{DynamicResource OmagCut_YellowIconToggleButton}">
             <Image Source="{DynamicResource CsvPlusImg}" Width="65" Height="65" HorizontalAlignment="Center" VerticalAlignment="Center" />
          </ToggleButton>
          <ToggleButton Name="MinusBtn" Grid.Column="1"
-            Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                       Style="{DynamicResource OmagCut_YellowIconToggleButton}">
             <Image Source="{DynamicResource CsvMinusImg}" Width="65" Height="65" HorizontalAlignment="Center" VerticalAlignment="Center" />
          </ToggleButton>
          <Button Name="InsertBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}" />
          <Button Name="RemoveBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowTextButton}" />
 
          <Button Name="OkBtn" Grid.Column="6" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-            <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}" />
+            <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}" />
          </Button>
-
-
-
       </Grid>
 
    </Grid>

CadCuts/CSVPage.xaml.vb

@@ -11,7 +11,7 @@ Public Class CSVPage
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
-   ' Flag tipologia
+   ' Flag tipologia (False -> Cvs semplificato)
    Private m_bFull As Boolean = False
    ' Flag inserimento diretto
    Private m_bDirect As Boolean = True
@@ -28,12 +28,16 @@ Public Class CSVPage
    Private m_ptRawMin As Point3d
    Private m_ptRawMax As Point3d
 
+   Dim m_bIsCounterLy As Boolean = False
+   Dim m_nCurrNubrOfParts As Integer = 0
+   Dim m_nIdToSel As Integer = GDB_ID.NULL
+
    Private Sub CSVPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno la lista dei pezzi Csv come sorgente del treeview
       PartsTreeView.ItemsSource = m_ItemsList
       ' Messaggi
-      InsertBtn.Content = EgtMsg(MSG_CSVPAGEUC + 2)    ' Inserisci
-      RemoveBtn.Content = EgtMsg(MSG_CSVPAGEUC + 4)    ' Rimuovi
+      InsertBtn.Content = EgtMsg(91202)    ' Inserisci
+      RemoveBtn.Content = EgtMsg(91204)    ' Rimuovi
       ' Determino se versione semplificata
       m_bFull = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CSV_AUTO) And
                 (GetPrivateProfileInt(S_CSV, K_FULL, 1, m_MainWindow.GetIniFile()) <> 0)
@@ -101,13 +105,36 @@ Public Class CSVPage
          If EgtIsPart(nPartId) Or bPartInTable Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nPartId, nStat)
-            ' Se già selezionato, lo deselezione
-            If nStat = GDB_ST.SEL Then
-               EgtDeselectObj(nPartId)
-            ' Altrimenti lo seleziono
-            Else
-               EgtSelectObj(nPartId)
+
+            ' verifico se l'lemento selezionato è il numero di pezzi
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT Then
+               Dim NameLayer As String = String.Empty
+               EgtGetName(EgtGetParent(nId), NameLayer)
+               If NameLayer = INFO_COUNTERLY Then
+                  Dim sText As String = String.Empty
+                  If EgtTextGetContent(nId, sText) Then
+                     Dim sItems() As String = sText.Split("#")
+                     If sItems.Count > 1 Then
+                        m_nCurrNubrOfParts = 0
+                        If StringToInt(sItems(1), m_nCurrNubrOfParts) And m_nCurrNubrOfParts > 0 Then
+                           m_bIsCounterLy = True
+                           m_nIdToSel = nPartId
+                        End If
+                     End If
+                  End If
+               End If
             End If
+
+            If Not m_bIsCounterLy Then
+               ' Se già selezionato, lo deselezione
+               If nStat = GDB_ST.SEL Then
+                  EgtDeselectObj(nPartId)
+                  ' Altrimenti lo seleziono
+               Else
+                  EgtSelectObj(nPartId)
+               End If
+            End If
+
             Exit While
          End If
          nId = EgtGetNextObjInSelWin()
@@ -115,6 +142,28 @@ Public Class CSVPage
       EgtDraw()
    End Sub
 
+   Private Sub OnMyMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseUpScene
+      If m_bIsCounterLy Then
+         ' apro una finestra di dialogo per chiedere se inserire tutti i pezzi della famiglia
+         Dim SelectWD As New SelectPartFromFamilyWD(m_MainWindow, m_nCurrNubrOfParts)
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(m_nIdToSel, INFO_REFGROUP, sRefGroup)
+         ' deseleziono il pezzo corrente
+         m_MainWindow.m_CadCutPageUC.m_NestPage.DeselectPartInFamily(sRefGroup)
+         Select Case SelectWD.NumberOfSelection
+            Case 0    ' Annulla
+               ' continuo senza eseguire niente
+            Case Else
+               ' seleziono il numero di pezzi indicati
+               m_MainWindow.m_CadCutPageUC.m_NestPage.SelectPartInFamily(sRefGroup, SelectWD.NumberOfSelection)
+         End Select
+         m_bIsCounterLy = False
+         ' disassegno il riferimento all'oggetto appena creato
+         SelectWD = Nothing
+         EgtDraw()
+      End If
+   End Sub
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(Me)
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC.m_NestPage)
@@ -133,15 +182,48 @@ Public Class CSVPage
       WritePrivateProfileString(S_CSV, K_CSVLASTFILE, "", m_MainWindow.GetIniFile())
    End Sub
 
+   Private Function CreateListOfDeniedFiles() As List(Of String)
+      Dim LocalList As New List(Of String)
+      LocalList.Add("MERGE")
+      Dim Index1 As Integer = 0
+      Dim Index2 As Integer = 0
+      For Index1 = 0 To m_CsvPartList.Count - 1
+         Dim sFileName As String = m_CsvPartList(Index1).m_sPath
+         sFileName = Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim()
+         Dim bNewFile As Boolean = True
+         For Index2 = 0 To LocalList.Count - 1
+            If sFileName = LocalList(Index2) Then
+               bNewFile = False
+               Exit For
+            End If
+         Next
+         If bNewFile Then
+            LocalList.Add(Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim)
+         End If
+      Next
+      Return LocalList
+   End Function
+
    Private Sub OpenBtn_Click(sender As Object, e As RoutedEventArgs) Handles OpenBtn.Click
-      ' Salvo lista dei pezzi attuale
-      SaveCsvPartList()
+      '' Salvo lista dei pezzi attuale
+      'SaveCsvPartList()
       ' Leggo direttorio corrente dei file CSV
       Dim sCurrDir As String = ""
       GetPrivateProfileString(S_CSV, K_CSVCURRDIR, "C:\", sCurrDir, m_MainWindow.GetIniFile())
       ' Apro dialogo scelta file
-      Dim OpenFileWnd As New OpenFileWD(m_MainWindow, sCurrDir, ".CSV", ".EPL")
+      Dim OpenFileWnd As OpenFileWD
+      Dim sDeniedFiles As List(Of String) = CreateListOfDeniedFiles()
+      ' imposto il filtro
+      If m_bFull Then
+         OpenFileWnd = New OpenFileWD(m_MainWindow, sCurrDir, ".CSV", ".EPL", sDeniedFiles)
+      Else
+         OpenFileWnd = New OpenFileWD(m_MainWindow, sCurrDir, ".CSV")
+      End If
       If Not OpenFileWnd.ShowDialog() Then Return
+      ' verifico che il file inserito non appartenga al Merge attuale
+
+      ' Salvo lista dei pezzi attuale
+      SaveCsvPartList()
       ' Salvo direttorio corrente
       WritePrivateProfileString(S_CSV, K_CSVCURRDIR, OpenFileWnd.GetFileDir(), m_MainWindow.GetIniFile())
       ' Apertura file
@@ -173,17 +255,28 @@ Public Class CSVPage
       ' Pulisco path e lista dei pezzi Csv
       m_sFilePath = String.Empty
       m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
+
+      ' mantengo la lista attuale dei pezzi
+      'm_CsvPartList.Clear()
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
       ' Eseguo la lettura del file Csv
-      If Not ReadCsvFile(sCsvPath, m_bFull, m_sCsvPath, m_CsvPartList) Then
+      If Not ReadCsvFile(sCsvPath, m_bFull, m_sCsvPath, LocalPartList) Then
          m_CurrProjPage.SetErrorMessage(EgtMsg(91206))    'Errore nella lettura del file CSV
          Return False
       End If
+
+      ' Creo un nuovo file che ospitarà il merge de
+      Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+      m_sCsvPath = sNewMergeFile
       m_sFilePath = m_sCsvPath
+
       ' Elimino pezzi nulli
-      RemoveWrongParts(m_CsvPartList)
+      RemoveWrongParts(LocalPartList)
       ' Aggiorno
       If m_bFull Then
+         MySaveCsvPartList(LocalPartList)
          ' Salvo come epl
          SaveCsvPartList()
          ' Rinomino file originale
@@ -196,9 +289,40 @@ Public Class CSVPage
          ' eseguo rinomina
          My.Computer.FileSystem.RenameFile(sCsvPath, sBakName)
       End If
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
       Return True
    End Function
 
+   Private Sub LoadCsvPartList(sFile As String)
+      ' Se Csv semplificato non va letta
+      If Not m_bFull Then Return
+      ' Pulisco path e lista dei pezzi Csv
+      m_sCsvPath = String.Empty
+
+      ' mantengo la lista attuale dei pezzi
+      'm_CsvPartList.Clear()
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
+
+      ' Lettura del file
+      If ReadCsvPartList(sFile, m_sCsvPath, LocalPartList) Then
+         ' Creo un nuovo file che ospitarà il merge de
+         Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+         m_sCsvPath = sNewMergeFile
+         m_sFilePath = m_sCsvPath
+      End If
+      ' Elimino pezzi nulli
+      RemoveWrongParts(LocalPartList)
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
+   End Sub
+
    Private Sub ShowTreeView()
       ' Path del file Csv
       Dim TempPath As New Text.StringBuilder(260)
@@ -208,6 +332,7 @@ Public Class CSVPage
       m_ItemsList.Clear()
       Dim sCurrMat As String = String.Empty
       Dim dCurrTh As Double = 0
+      Dim sCurrPath As String = String.Empty
       Dim nCatToNest As Integer = 0
       Dim nCatCount As Integer = 0
       Dim PartCathegory As New PartCathegoryItem("", 0)
@@ -218,19 +343,28 @@ Public Class CSVPage
          If i = 1 Then
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
          ElseIf String.Compare(sCurrMat, CurrPart.m_sMaterial, True) <> 0 Or
+                String.Compare(sCurrPath, CurrPart.m_sPath, True) <> 0 Or
                 Math.Abs(dCurrTh - CurrPart.m_dTh) > 10 * EPS_SMALL Then
             If m_bFull Then
                PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                                     " - " & LenToString(dCurrTh, 2) &
                                     " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
             Else
                PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
             End If
             PartCathegory.IsExpanded = True
             m_ItemsList.Add(PartCathegory)
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
             PartCathegory = New PartCathegoryItem("", 0)
             nCatToNest = 0
             nCatCount = 0
@@ -248,8 +382,14 @@ Public Class CSVPage
          PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                               " - " & LenToString(dCurrTh, 2) &
                               " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
       Else
          PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
       End If
       PartCathegory.IsExpanded = True
       m_ItemsList.Add(PartCathegory)
@@ -259,6 +399,7 @@ Public Class CSVPage
       For Each CatItem As PartCathegoryItem In m_ItemsList
          Dim sCurrMat As String = String.Empty
          Dim dCurrTh As Double = 0
+         Dim sCurrPath As String = String.Empty
          Dim nCatToNest As Integer = 0
          Dim nCatCount As Integer = 0
          For Each PrtItem As PartCustomItem In CatItem.Items
@@ -268,6 +409,7 @@ Public Class CSVPage
             PrtItem.sText1 = sCount
             sCurrMat = PartData.m_sMaterial
             dCurrTh = PartData.m_dTh
+            sCurrPath = PartData.m_sPath
             nCatToNest += PartData.m_nToNest
             nCatCount += PartData.m_nCount
          Next
@@ -275,8 +417,14 @@ Public Class CSVPage
             CatItem.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                            " - " & LenToString(dCurrTh, 2) &
                            " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
          Else
             CatItem.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
          End If
       Next
    End Sub
@@ -345,6 +493,7 @@ Public Class CSVPage
    End Function
 
    Private Sub InsertBtn_Click(sender As Object, e As RoutedEventArgs) Handles InsertBtn.Click
+      'm_CurrProjPage.ClearMessage()
       ' Recupero lo spessore della lastra corrente
       Dim dRawHeight As Double = GetRawHeight()
       If dRawHeight < EPS_SMALL Then Return
@@ -355,20 +504,17 @@ Public Class CSVPage
       End If
       ' Recupero la tolleranza sullo spessore
       Dim dToler As Double = GetPrivateProfileDouble(S_CSV, K_THICKTOLERANCE, 100 * EPS_SMALL, m_MainWindow.GetIniFile())
-      dToler = Math.Max( dToler, 100 * EPS_SMALL)
+      dToler = Math.Max(dToler, 100 * EPS_SMALL)
       ' Creo la lista dei pezzi inseribili nella lastra corrente
       Dim InsPartList As New List(Of CsvPart)
       For i As Integer = 1 To m_CsvPartList.Count()
          Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
          If CurrPart.m_bActive And
-            (Math.Abs(CurrPart.m_dTh - dRawHeight) < dToler Or
-              CurrPart.m_dTh < EPS_SMALL) And
-            (String.IsNullOrWhiteSpace(CurrPart.m_sMaterial) Or
-             String.IsNullOrWhiteSpace(sCurrMat) Or
-             CurrPart.m_sMaterial = "***" Or
-             sCurrMat = "***" Or
-             String.Compare(CurrPart.m_sMaterial, sCurrMat, True) = 0) Then
+            (Math.Abs(CurrPart.m_dTh - dRawHeight) < dToler Or CurrPart.m_dTh < EPS_SMALL) And
+            (String.IsNullOrWhiteSpace(CurrPart.m_sMaterial) Or String.IsNullOrWhiteSpace(sCurrMat) Or CurrPart.m_sMaterial = "***" Or sCurrMat = "***" Or String.Compare(CurrPart.m_sMaterial, sCurrMat, True) = 0) Then
             InsPartList.Add(CurrPart)
+            'ElseIf CurrPart.m_bActive Then
+            '   m_CurrProjPage.SetWarningMessage("Grezzo non compatibile")
          End If
       Next
       ' Lancio l'inserimento dei pezzi
@@ -424,10 +570,14 @@ Public Class CSVPage
          ' Definizione variabili
          Dim dDimX = CurrPart.m_dDimX
          Dim dDimY = CurrPart.m_dDimY
+         Dim dAng = New Double() {CurrPart.m_dAng1,CurrPart.m_dAng2,CurrPart.m_dAng3,CurrPart.m_dAng4}
+         Dim dHeel = New Double() {CurrPart.m_dHeel1,CurrPart.m_dHeel2,CurrPart.m_dHeel3,CurrPart.m_dHeel4}
          If bMaxDimOnX And dDimY > dDimX Then
             Dim dTemp As Double = dDimX
             dDimX = dDimY
             dDimY = dTemp
+            dAng = New Double() {CurrPart.m_dAng2,CurrPart.m_dAng3,CurrPart.m_dAng4,CurrPart.m_dAng1}
+            dHeel = New Double() {CurrPart.m_dHeel2,CurrPart.m_dHeel3,CurrPart.m_dHeel4,CurrPart.m_dHeel1}
          End If
          EgtLuaSetGlobNumVar("CMP.V1", dDimX)
          EgtLuaSetGlobNumVar("CMP.V2", dDimY)
@@ -439,7 +589,7 @@ Public Class CSVPage
          If nId = GDB_ID.NULL Then Continue For
          CurrPart.m_nId = nId
          ' Muovo la regione in Z per evitare problemi in visualizzazione
-         Dim nRegId = EgtGetFirstNameInGroup(nId, NAME_REGION)
+         Dim nRegId As Integer = EgtGetFirstNameInGroup(nId, NAME_REGION)
          EgtMove(nRegId, New Vector3d(0, 0, DELTAZ_REG), GDB_RT.GLOB)
          ' Eventuale testo per indicare il sopra
          If Not bMaxDimOnX Then
@@ -447,11 +597,36 @@ Public Class CSVPage
             Dim nText As Integer = EgtCreateTextAdv(nRegId, New Point3d(dDimX / 2, dDimY - 0.6 * dH, 0), 0, "*TOP*", "", 500, False, dH, 1, 0, INS_POS.MC)
             EgtSetColor(nText, New Color3d( 0, 0, 0))
          End If
+         ' Inserisco eventuali angoli di fianco
+         Dim bSideAngs As Boolean = False
+         Dim nOutLoopId As Integer = EgtGetFirstNameInGroup( nId, NAME_OUTLOOP)
+         For nSide As Integer = 1 To 4
+            Dim dSideAng As Double = dAng( nSide - 1)
+            Dim dSideHeel As Double = dHeel( nSide - 1)
+            If Math.Abs( dSideAng) > EPS_ANG_SMALL Then
+               Dim nEntId As Integer = EgtGetFirstNameInGroup( nOutLoopId, "A" & nSide.ToString())
+               If nEntId <> GDB_ID.NULL Then
+                  bSideAngs = True
+                  ' Assegno valori
+                  EgtSetInfo(nEntId, INFO_SIDE_ANGLE, dSideAng)
+                  EgtSetInfo(nEntId, INFO_ORIG_SIDE_ANGLE, dSideAng)
+                  EgtSetInfo(nEntId, INFO_HEEL, dSideHeel)
+               End If
+            End If
+         Next
+         ' Creo layer per testi nesting
+         If bSideAngs Then
+            Dim TextLayId As Integer = EgtCreateGroup(nId)
+            EgtSetName(TextLayId, SIDE_ANGLE_LAYER)
+            EgtSetColor(TextLayId, New Color3d(0, 0, 128))
+            ' Opero su geometria esterna pezzo
+            SideAngle.WriteSideAngleOnLoop(nOutLoopId, TextLayId)
+         End If
          ' Aggiusto per lavorazioni
          EgtAdjustFlatPart(nId)
          ' Se Csv completo, aggiungo info su CSV di origine
          If m_bFull Then
-            EgtSetInfo(nId, INFO_CSV_PATH, m_sCsvPath)
+            EgtSetInfo(nId, INFO_CSV_PATH, CurrPart.m_sPath)
             EgtSetInfo(nId, INFO_CSV_PART, CurrPart.m_sName)
             EgtSetInfo(nId, INFO_CSV_ORD, CurrPart.m_sOrd)
             EgtSetInfo(nId, INFO_CSV_DIST, CurrPart.m_sDist)
@@ -461,14 +636,36 @@ Public Class CSVPage
          Utility.SetTextColor( nRegId)
          ' Lo sposto nel gruppo speciale
          EgtRelocate(nId, nIpGrp)
+
+
+         ' assegno l'identificatico del pezzo, se esiste
+         If Not String.IsNullOrEmpty(CurrPart.m_sRefGuid) Then
+            ' GuidCode dovrebbe contenere 36 caratteri, il precode 5: tot = 41
+            If CurrPart.m_sRefGuid.Count <= 36 Then
+               Dim sPreGuid As String = CreatePreGuidCode(CurrPart.m_nId)
+               CurrPart.m_sRefGuid = sPreGuid & CurrPart.m_sRefGuid
+            End If
+            EgtSetInfo(CurrPart.m_nId, INFO_REFGROUP, CurrPart.m_sRefGuid)
+         End If
+         Dim nRegLayId As Integer = EgtGetFirstNameInGroup(CurrPart.m_nId, NAME_REGION)
+         ' Imposto il colore del pezzo inserito nel progetto
+         EgtSetColor(nRegLayId, CurrPart.m_cColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, CurrPart.m_cColor)
+            EntId = EgtGetNext(EntId)
+         End While
+
       Next
       EgtLuaResetGlobVar("CMP")
       EgtLuaResetGlobVar("CMP_Draw")
+
       ' Provo ad inserire i pezzi
       Dim dNewArea As Double = 0
       For i As Integer = 1 To InsPartList.Count()
          Dim CurrPart As CsvPart = InsPartList(i - 1)
          While CurrPart.m_nToNest > 0
+
             If m_bDirect Then
                If NestOnePart(CurrPart.m_nId) Then
                   dNewArea += GeomCalc.GetPartArea(CurrPart.m_nId)
@@ -490,6 +687,7 @@ Public Class CSVPage
       m_CurrProjPage.UpdateTotalArea( dNewArea)
       m_CurrProjPage.UpdateToProduceArea()
       m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
+
       Return True
    End Function
 
@@ -550,10 +748,10 @@ Public Class CSVPage
       ' Eventuale messaggi di pezzi liberi o da altre liste
       If bOther Then
          ' Pezzi non rimossi perché liberi
-         Dim sOut As String = EgtMsg(MSG_EGTMSGBOX + 13)
+         Dim sOut As String = EgtMsg(91113)
          If Not String.IsNullOrWhiteSpace(sOtherCsv) Then
             ' o di altre liste Csv
-            sOut &= EgtMsg(MSG_EGTMSGBOX + 14) & " (" & sOtherCsv.TrimEnd(", ".ToCharArray()) & ")"
+            sOut &= EgtMsg(91114) & " (" & sOtherCsv.TrimEnd(", ".ToCharArray()) & ")"
          End If
          Dim WarnMsg As New EgtMsgBox(m_MainWindow, "", sOut, EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL, 0, 1)
       End If
@@ -566,11 +764,11 @@ Public Class CSVPage
       Dim sName As String = String.Empty
       EgtGetInfo(nId, INFO_CSV_PART, sName)
       ' Verifico che il pezzo appartenga a questo Csv
-      If String.Compare(sCsvPath, m_sCsvPath, True) = 0 Then
+      If SearchCurrCSV(sCsvPath) Then
          ' Cerco il pezzo nella lista dei pezzi
          For i As Integer = 1 To m_CsvPartList.Count()
             Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
-            If String.Compare(sName, CurrPart.m_sName, True) = 0 Then
+            If String.Compare(sName, CurrPart.m_sName, True) = 0 And String.Compare(sCsvPath, CurrPart.m_sPath, True) = 0 Then
                ' Se nel grezzo
                If EgtGetParent(nId) = m_nRawId Then
                   ' Rimuovo le lavorazioni
@@ -578,19 +776,38 @@ Public Class CSVPage
                   ' Rimuovo dal grezzo
                   EgtRemovePartFromRawPart(nId)
                End If
+               ' recupero il Guid del pezzo corrente (potrebbe essere stato modificato a causa di rotazioni quando il pezzo è passato in parcheggio)
+               Dim sCurrRefGuid As String = String.Empty
+               EgtGetInfo(nId, INFO_REFGROUP, sCurrRefGuid)
                ' Cancello il pezzo
                EgtErase(nId)
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio (se sRefGroup<>"")
+               m_MainWindow.m_CadCutPageUC.m_NestPage.CountPartInFamily(sCurrRefGuid)
                ' Aggiorno il contatore
                CurrPart.m_nToNest += 1
+               ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+               m_MainWindow.m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
                ' Esco
                Return True
             End If
          Next
       End If
+      ' creo la lista delle famiglie di pezzi presenti in parcheggio
+      m_MainWindow.m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
       ' Pezzo non appartenente al Csv corrente
       Return False
    End Function
 
+   Private Function SearchCurrCSV(ByVal sCSVFile As String) As Boolean
+      For i As Integer = 1 To m_CsvPartList.Count()
+         Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
+         If String.Compare(sCSVFile, CurrPart.m_sPath, True) = 0 Then
+            Return True
+         End If
+      Next
+      Return False
+   End Function
+
    Friend Sub SaveCsvPartList()
       ' Se Csv semplificato non va salvata
       If Not m_bFull Then Return
@@ -601,24 +818,33 @@ Public Class CSVPage
       End If
       ' Path del file
       Dim sFile As String = Path.ChangeExtension(m_sFilePath, ".epl")
-      ' Scrittura del file
-      If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
-         ' Registro in ini path
-         WritePrivateProfileString(S_CSV, K_CSVLASTFILE, sFile, m_MainWindow.GetIniFile())
+      ' Scrittura dei file
+      If WriteCsvMergePartList(m_CsvPartList) Then
+         ' Scrittura dei file Merge
+         If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
+            WritePrivateProfileString(S_CSV, K_CSVLASTFILE, sFile, m_MainWindow.GetIniFile())
+         End If
       End If
    End Sub
 
-   Private Sub LoadCsvPartList(sFile As String)
-      ' Se Csv semplificato non va letta
+   ' salvo il sottoelenco dei pezzi
+   Friend Sub MySaveCsvPartList(ByVal CurrPartList As List(Of CsvPart))
+      ' Se Csv semplificato non va salvata
       If Not m_bFull Then Return
-      ' Pulisco path e lista dei pezzi Csv
-      m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
-      ' Lettura del file
-      ReadCsvPartList(sFile, m_sCsvPath, m_CsvPartList)
-      m_sFilePath = sFile
-      ' Elimino pezzi nulli
-      RemoveWrongParts(m_CsvPartList)
+      Dim sCurrPath As String = String.Empty
+      ' recupero dalla lista il nome del file corrente
+      For Each Item As CsvPart In CurrPartList
+         sCurrPath = Item.m_sPath
+      Next
+      ' se non trov il nome del file assocciato all'elenco di pezzi esco
+      If String.IsNullOrEmpty(sCurrPath) Then
+         EgtOutLog("CSV Curr list missing")
+         Return
+      End If
+      ' Path del file
+      Dim sFile As String = Path.ChangeExtension(sCurrPath, ".epl")
+      ' Scrittura del file
+      WriteCsvPartList(sFile, sCurrPath, CurrPartList)
    End Sub
 
    Friend Sub UpdateCsvPartList()

CadCuts/CadCutPageUC.xaml

@@ -7,7 +7,7 @@
              d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="CadCutPage_Initialized" Loaded="CadCutPage_Loaded" Unloaded="CadCutPage_Unloaded">
 
    <!-- Definizione della CadCutPage -->
-    <Grid Name="CadCutPageGrid" >
+   <Grid Name="CadCutPageGrid" >
       <Grid.ColumnDefinitions>
          <ColumnDefinition Width="3*"/>
          <ColumnDefinition Width="12*"/>
@@ -30,24 +30,25 @@
          </Grid.ColumnDefinitions>
 
          <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-                <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            <Image Name="PhotoIMG" Source="{DynamicResource PhotoImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
-            <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+         <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+            <Image Source="{DynamicResource RawPartImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
-            <Button Name="DrawBtn" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource DrawImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+         <Button Name="DrawBtn" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+            <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
-            <Button Name="ImportBtn" Grid.Column="3" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource ImportImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+         <Button Name="ImportBtn" Grid.Column="3" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+            <Image Source="{DynamicResource ImportImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
          <Button Name="SplitBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Name="SplitImage" Width="65" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            <Image Name="SplitImage" Width="65" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
 
       </Grid>
 
-      <!-- Definizione della Grid inferiore --><!--
+      <!-- Definizione della Grid inferiore -->
+      <!--
       <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="2" >
          <Grid.ColumnDefinitions>
             <ColumnDefinition Width="1*"/>

CadCuts/CadCutPageUC.xaml.vb

@@ -2,6 +2,8 @@
 Imports EgtWPFLib
 Imports System.Reflection
 Imports System.Globalization
+Imports EgtWPFLib5
+Imports System.Windows.Forms
 
 Public Class CadCutPageUC
 
@@ -107,6 +109,9 @@ Public Class CadCutPageUC
 
    Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRectangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Se macchina fotografica collegata, faccio una foto
@@ -140,6 +145,9 @@ Public Class CadCutPageUC
 
    Private Sub RawPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RawPartBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRectangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_RawPartPage)
@@ -148,9 +156,9 @@ Public Class CadCutPageUC
       ' Se modalità fast grid, elimino tutti i pezzi
       If m_CadCutMode = CadCutModes.FastGrid Then
          Dim nRawId As Integer = CamAuto.GetCurrentRaw()
-         Dim nPartId As Integer = EgtGetFirstPartInRawPart( nRawId)
+         Dim nPartId As Integer = EgtGetFirstPartInRawPart(nRawId)
          While nPartId <> GDB_ID.NULL
-            Dim nNextPartId = EgtGetNextPartInRawPart( nPartId)
+            Dim nNextPartId = EgtGetNextPartInRawPart(nPartId)
             ' Rimuovo dal grezzo
             EgtRemovePartFromRawPart(nPartId)
             ' Rimuovo le lavorazioni
@@ -165,6 +173,9 @@ Public Class CadCutPageUC
 
    Private Sub DrawBtn_Click(sender As Object, e As RoutedEventArgs) Handles DrawBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRectangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
@@ -172,6 +183,9 @@ Public Class CadCutPageUC
 
    Private Sub ImportBtn_Click(sender As Object, e As RoutedEventArgs) Handles ImportBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRectangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_ImportPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Import
@@ -193,10 +207,13 @@ Public Class CadCutPageUC
    End Sub
 
    Private Sub SplitBtn_Click(sender As Object, e As RoutedEventArgs) Handles SplitBtn.Click
+      m_MainWindow.DragRectangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtDeselectObj(m_NestPage.m_CurrSelectedCurv)
       m_ProjectMgr.TestBtn.IsChecked = False
-      m_CurrProjPage.m_bSelectCurv = False
+      m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
       Select Case m_CadCutMode
          Case CadCutModes.Nest, CadCutModes.FastGrid
             ' Passo alla pagina Split
@@ -206,9 +223,9 @@ Public Class CadCutPageUC
                SplitImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/Nest.png", UriKind.Relative))
             End If
             If m_CadCutMode = CadCutModes.Nest Then
-                  CadCutPageGrid.Children.Remove(m_NestPage)
-               Else
-                  CadCutPageGrid.Children.Remove(m_FastGridSlabManager)
+               CadCutPageGrid.Children.Remove(m_NestPage)
+            Else
+               CadCutPageGrid.Children.Remove(m_FastGridSlabManager)
             End If
             CadCutPageGrid.Children.Add(m_SplitPage)
             m_CadCutMode = CadCutModes.Split
@@ -227,7 +244,7 @@ Public Class CadCutPageUC
                ' Reinserisco tutte le lavorazioni
                Dim nWarn As Integer = 0
                AddMachinings(GDB_ID.NULL, nWarn)
-               If nWarn = 1 Then m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SPLITPAGEUC + 11)) ' Lama troppo grande per utilizzo ventosa
+               If nWarn = 1 Then m_CurrProjPage.SetWarningMessage(EgtMsg(90351)) ' Lama troppo grande per utilizzo ventosa
                ' Imposto flag di modifica
                m_SplitPage.m_bShow = False
             End If

CadCuts/ChangeToolWD.xaml

@@ -0,0 +1,92 @@
+<Window x:Class="ChangeToolWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="ChooseTool" Height="382.6" Width="426.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
+
+   <Border Style="{DynamicResource OmagCut_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.15*"/>
+            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="0.15*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+         </Grid.RowDefinitions>
+
+         <TextBlock Name="FilePathTxBl" Grid.Column="1" Grid.Row="0" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+         <!--TextAlignment="Center"
+              FontSize="20"
+              VerticalAlignment="Center"-->
+
+         <Grid Grid.Column="1" Grid.Row="1">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.8*"/>
+               <ColumnDefinition Width="0.7*"/>
+               <ColumnDefinition Width="0.7*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Grid.Column="0" Text="MACHINING" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <TextBlock Grid.Column="1" Text="TOOL" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <TextBlock Grid.Column="2" Text="TC" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" Margin="10,0,0,0"/>
+         </Grid>
+
+         <ListBox Name="SetUpToolListBox" Grid.Column="1" Grid.Row="2"
+                  ItemsSource="{Binding ItemList}">
+            <ListBox.ItemTemplate>
+               <DataTemplate>
+                  <Grid Width="{Binding ActualWidth, ElementName=SetUpToolListBox}" Margin="0,0,-40,0">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="0.8*"/>
+                        <ColumnDefinition Width="0.7*"/>
+                        <ColumnDefinition Width="0.4*"/>
+                        <ColumnDefinition Width="0.0*"/>
+                     </Grid.ColumnDefinitions>
+                     <TextBlock Grid.Column="0" Text="{Binding Machining}" Style="{DynamicResource OmagCut_ListBoxTextBlock}"/>
+                     <TextBlock Grid.Column="1" Text="{Binding ToolName}" Style="{DynamicResource OmagCut_ListBoxTextBlock}"/>
+                     <TextBlock Grid.Column="2" Text="{Binding ToolPos}" Style="{DynamicResource OmagCut_ListBoxTextBlock}"/>
+                     <Rectangle Grid.Column="2" Style="{DynamicResource Rect_SplitPage}" Margin="15,0,0,0"/>
+                     <Grid.ToolTip>
+                        <StackPanel>
+                           <TextBlock Text="{Binding Machining}" Style="{DynamicResource OmagCut_ListBoxTextBlock}"/>
+                           <TextBlock Text="{Binding ToolName}" Style="{DynamicResource OmagCut_ListBoxTextBlock}" />
+                           <TextBlock Text="{Binding ToolPos}" Style="{DynamicResource OmagCut_ListBoxTextBlock}"/>
+                        </StackPanel>
+                     </Grid.ToolTip>
+                  </Grid>
+               </DataTemplate>
+            </ListBox.ItemTemplate>
+         </ListBox>
+
+         <TextBlock Name="ErrorTxBl" Grid.Column="1" Grid.Row="3" 
+                    Style="{DynamicResource OmagCut_ErrorTextBlock}"/>
+
+         <Grid Grid.Column="1" Grid.Row="5">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+               <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
+
+      </Grid>
+
+   </Border>
+</Window>

CadCuts/ChangeToolWD.xaml.vb

@@ -0,0 +1,371 @@
+Imports System.Collections.ObjectModel
+Imports EgtUILib
+
+Public Class ChangeToolWD
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_MachiningList As New ObservableCollection(Of ItemMachining)
+
+   Sub New(Owner As Window)
+      Me.Owner = Owner
+      InitializeComponent()
+   End Sub
+
+   ' Parametri della lama impostata correntemente in macchina
+   Private m_DefaultSaw_Name As String = String.Empty
+   Private m_DefaultSaw_Diam As Double = 0
+   Private m_DefaultSaw_Thick As Double = 0
+   Private m_DefaultSaw_Exists As Boolean = False
+
+   ' Il nome della lavorazione restituito dalla selezione
+   Private m_NewSawing As String = String.Empty
+   Public ReadOnly Property NewSawing As String
+      Get
+         Return m_NewSawing
+      End Get
+   End Property
+
+   ' Il colore della lavorazione
+   Private m_EgtColor As New Color3d
+   Public ReadOnly Property EgtColor As Color3d
+      Get
+         Return m_EgtColor
+      End Get
+   End Property
+
+   ' Il nome della posizione sulla rulliera
+   Private m_TCPos As String = String.Empty
+   Public ReadOnly Property TCPos As String
+      Get
+         Return m_TCPos
+      End Get
+   End Property
+
+   ' Nome della lavorazione corrente
+   Private m_CurrSawing As String = String.Empty
+   Public Property CurrSawing As String
+      Get
+         Return m_CurrSawing
+      End Get
+      Set(value As String)
+         m_CurrSawing = value
+      End Set
+   End Property
+
+   Private Sub GetDiamAndThickDefaultSaw()
+      m_DefaultSaw_Name = m_MainWindow.m_CurrentMachine.sCurrSaw
+      ' Dalla lavorazione corrente recupero il nome della lama
+      If EgtMdbSetCurrMachining(m_CurrSawing) Then
+         Dim sNameTool As String = String.Empty
+         If EgtMdbGetCurrMachiningParam(MCH_MP.TOOL, sNameTool) Then m_DefaultSaw_Name = sNameTool
+      End If
+      If EgtTdbSetCurrTool(m_DefaultSaw_Name) Then
+         ' Diametro lama lavorazione
+         EgtTdbGetCurrToolParam(MCH_TP.DIAM, m_DefaultSaw_Diam)
+         ' Spessore lama corrente
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, m_DefaultSaw_Thick)
+         m_DefaultSaw_Exists = True
+      End If
+   End Sub
+
+   Private Sub ChangeToolWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' Posizione finestra
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+      ' Definizione del collegamento tra ItemList e ListBox1
+      SetUpToolListBox.ItemsSource = m_MachiningList
+      ' Seleziona lavorazione
+      FilePathTxBl.Text = EgtMsg(90378)
+   End Sub
+
+   Private Sub ChangeToolWD_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
+      If String.IsNullOrEmpty(m_CurrSawing) Then
+         m_CurrSawing = m_MainWindow.m_CurrentMachine.sCurrSawing
+      End If
+      ' carico elenco degli utensili impostati attualmente in macchina (anche il laser!)
+      LoadSetUpMachining()
+      ' ricerco la lavorazione corrente
+      Dim Item As ItemMachining = m_MachiningList.FirstOrDefault(Function(x) x.Machining = m_CurrSawing)
+      Dim Index As Integer = m_MachiningList.IndexOf(Item)
+      If Index < 0 Then
+         ' Imposto lavorazione di default  
+         EgtMdbSetCurrMachining(m_CurrSawing)
+         Dim sTool As String = String.Empty
+         EgtMdbGetCurrMachiningParam(MCH_MP.TOOL, sTool)
+         ' ⚠️ Utensile {0} non attrezzato
+         ErrorTxBl.Text = String.Format(EgtMsg(90377), sTool)
+         Index = 0
+      End If
+      ' se presente seleziono il primo elemento
+      If m_MachiningList.Count > 0 Then
+         SetUpToolListBox.SelectedItem = m_MachiningList(Index)
+         OkBtn.IsEnabled = True
+      Else
+         OkBtn.IsEnabled = False
+      End If
+   End Sub
+
+#Region "SET UP MACHINING"
+
+   ' Creo le liste da mostrare nella lista
+   Private Function LoadSetUpMachining() As Boolean
+      ' Pulisco la lista delle lavorazioni di lama
+      m_MachiningList.Clear()
+      ' Imposto il contesto corrente
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' Recupero la lista di tutte le lavorazioni di lama
+      Dim SawingList As List(Of String) = GetAllSawing()
+      ' Se non ci sono lavorazioni di lama allora esco
+      If SawingList.Count() = 0 Then Return False
+      ' Carico le lavorazioni di lama compatibili
+      CreateSawingList(SawingList)
+      Return True
+   End Function
+
+   ' Creo la lista delle delle lavorazioni di lama da proporre
+   Private Sub CreateSawingList(SawingList As List(Of String))
+      ' Recupero le info della lama montata di default
+      GetDiamAndThickDefaultSaw()
+      ' Verifico se lama fissa
+      Dim bFixedSaw As Boolean = Not CamAuto.CanChangeSaw()
+      ' recupero la prima lavorazione
+      For Each sSawingName As String In SawingList
+         Dim sToolName As String = ""
+         ' Imposto la lavorazione corrente
+         EgtMdbSetCurrMachining(sSawingName)
+         ' Recupero il nome dell'utensile della lavorazione
+         EgtMdbGetCurrMachiningParam(MCH_MP.TOOL, sToolName)
+         If String.IsNullOrWhiteSpace( sToolName) Then Continue For
+         ' Se lama fissa
+         If bFixedSaw Then
+            ' Sono ammesse solo altre lavorazioni con la stessa lama
+            If sToolName = m_DefaultSaw_Name AndAlso VerifyCurrMachiningMaterial() Then
+               ' recupero eventuale posizione
+               EgtTdbSetCurrTool(sToolName)
+               Dim sTCPos As String = ""
+               EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sTCPos)
+               ' inserisco in lista
+               m_MachiningList.Add(New ItemMachining(sSawingName, sToolName, sTCPos, New Color3d(0, 0, 0, 100)))
+            End If
+         ' altrimenti (ammessa solo se da TC)
+         Else
+            ' Verifico compatibilità nelle dimensioni lama e nei materiali ammessi dalla lavorazione
+            If Not( VerifyCurrSawTolerance(sToolName) AndAlso VerifyCurrMachiningMaterial()) Then Continue For
+            ' Cerco la lama nel TC
+            For Each ToolPosition As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+               If sToolName = ToolPosition.sTool Then
+                  m_MachiningList.Add(New ItemMachining(sSawingName, sToolName, ToolPosition.sName, Utility.GetColorPV()))
+                  Exit For
+               End If
+            Next
+         End If
+      Next
+      ' reimposto la lavorazione di lama e la lama impostate in macchina
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw)
+      EgtMdbSetCurrMachining(m_MainWindow.m_CurrentMachine.sCurrSawing)
+   End Sub
+
+   ' Verifico se la lavorazione impostata nella chiamante e quindi corrente può lavorare il grezzo corrente
+   Private Function VerifyCurrMachiningMaterial() As Boolean
+      ' Stringa identificativa del materiale corrente
+      Dim sCurrMatId As String = m_MainWindow.m_CurrentMachine.CurrMat.nId.ToString()
+      If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+         sCurrMatId &= "." & m_MainWindow.m_CurrentMachine.CurrMat.SubId.ToString()
+      End If
+      ' Recupero elenco materiali della lavorazione
+      Dim sSysNotes As String = ""
+      EgtMdbGetCurrMachiningParam(MCH_MP.SYSNOTES, sSysNotes)
+      If String.IsNullOrWhiteSpace( sSysNotes) Then Return False
+      ' Cerco un materiale compatibile con il corrente
+      Dim sItems() As String = sSysNotes.Split(";".ToCharArray)
+      For Ind As Integer = 0 To sItems.Count() - 1
+         ' Divido il materiale nei suoi parametri
+         Dim sParams() = sItems(Ind).Split(",".ToCharArray)
+         ' Se è il materiale del grezzo corrente
+         If sParams.Count() >= 3 AndAlso Trim(sParams(0)) = sCurrMatId Then
+            ' Verifico rientri nello spessore ammesso
+            Dim dMinTh As Double = 0
+            Dim dMaxTh As Double = 0
+            StringToDouble(sParams(1), dMinTh)
+            StringToDouble(sParams(2), dMaxTh)
+            If dMinTh < dMaxTh - 10 * EPS_SMALL And
+               m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight >= dMinTh And
+               m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight <= dMaxTh Then
+               Return True
+            Else
+               Return False
+            End If
+         End If
+      Next
+      ' Non ho trovato niente
+      Return False
+   End Function
+
+   ' verifico l'utensile corrente (impostato nella funzione chiamante) se ha le stesse dimensioni della lama di default
+   Private Function VerifyCurrSawTolerance(sNameTool As String) As Boolean
+      If m_DefaultSaw_Exists Then
+         If EgtTdbSetCurrTool(sNameTool) Then
+            ' Diametro nuova lama
+            Dim NewDiam As Double = 0
+            EgtTdbGetCurrToolParam(MCH_TP.DIAM, NewDiam)
+            ' Spessore lama
+            Dim NewThick As Double = 0
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, NewThick)
+            ' Verifico che la nuova lama possa essere applicata: diametro max 1.25*prec, uguale spessore
+            Dim Delta_Diam As Double = NewDiam - m_DefaultSaw_Diam
+            Dim Delta_Thick As Double = Math.Abs(NewThick - m_DefaultSaw_Thick)
+            If Delta_Diam < 0.25 * m_DefaultSaw_Diam And Delta_Thick < EPS_SMALL Then
+               Return True
+            Else
+               EgtOutLog(String.Format("New saw {0} can not replace the current {1}; Delta_Diam={2}, |Delta_Thick|={3} ", sNameTool, m_DefaultSaw_Name, Delta_Diam, Delta_Thick))
+            End If
+         Else
+            EgtOutLog("Impossible to find in toolDB saw: " & sNameTool)
+         End If
+      Else
+         If String.IsNullOrEmpty(m_DefaultSaw_Name) Then
+            EgtOutLog("There is no machine CurrSaw!")
+         Else
+            EgtOutLog("Impossible to find in toolDB machine CurrSaw: " & m_DefaultSaw_Name)
+         End If
+      End If
+      Return False
+   End Function
+
+   ' Restituisce tutto l'elenco delle lavorazioni di taglio di lama disponibili in macchina
+   Private Function GetAllSawing() As List(Of String)
+      Dim sFName As String = EgtMsg(90771)   ' Uscita
+      If Not m_MainWindow.m_CurrentMachine.bSawing Then Return Nothing
+      ' Inserisco categoria ed eventuali elementi
+      Dim SawingList As New List(Of String)
+      Dim nFType As Integer = MCH_MY.SAWING
+      Dim MachiningName As String = String.Empty
+      Dim bFound As Boolean = EgtMdbGetFirstMachining(nFType, MachiningName)
+      While bFound
+         SawingList.Add( MachiningName)
+         bFound = EgtMdbGetNextMachining(nFType, MachiningName)
+      End While
+      Return SawingList
+   End Function
+
+#End Region    ' Set up machinining
+
+   Private Sub SetUpToolListBox_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles SetUpToolListBox.PreviewMouseUp
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      Else
+         m_NewSawing = m_MachiningList(SetUpToolListBox.SelectedIndex).Machining
+         m_EgtColor = m_MachiningList(SetUpToolListBox.SelectedIndex).FootprintToolColor
+         m_TCPos = m_MachiningList(SetUpToolListBox.SelectedIndex).ToolPos
+         OkBtn.IsEnabled = True
+      End If
+   End Sub
+
+   Private Sub SetUpToolListBox_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles SetUpToolListBox.SelectionChanged
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      Else
+         m_NewSawing = m_MachiningList(SetUpToolListBox.SelectedIndex).Machining
+         m_EgtColor = m_MachiningList(SetUpToolListBox.SelectedIndex).FootprintToolColor
+         m_TCPos = m_MachiningList(SetUpToolListBox.SelectedIndex).ToolPos
+         OkBtn.IsEnabled = True
+      End If
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      DialogResult = True
+   End Sub
+
+End Class
+
+Public Class ItemMachining
+
+   Private m_ToolPos As String = String.Empty
+   Private m_ToolName As String = String.Empty
+   Private m_Machining As String = String.Empty
+   Private m_ToolExit As Integer = 1
+   Private m_ToolType As Integer = -1
+   Private m_FootprintToolColor As New Color3d(0, 255, 0, 100)
+   Private m_cSawColor As SolidColorBrush
+
+   ' Posizione porta utensile
+   Public Property ToolPos As String
+      Get
+         Return m_ToolPos
+      End Get
+      Set(value As String)
+         m_ToolPos = value
+      End Set
+   End Property
+
+   ' Nome utensile
+   Public Property ToolName As String
+      Get
+         Return m_ToolName
+      End Get
+      Set(value As String)
+         m_ToolName = value
+      End Set
+   End Property
+
+   ' Nome della lavorazione
+   Public Property Machining As String
+      Get
+         Return m_Machining
+      End Get
+      Set(value As String)
+         m_Machining = value
+      End Set
+   End Property
+
+   Public Property ToolExit As Integer
+      Get
+         Return m_ToolExit
+      End Get
+      Set(value As Integer)
+         m_ToolExit = value
+      End Set
+   End Property
+
+   Public Property ToolType As Integer
+      Get
+         Return m_ToolType
+      End Get
+      Set(value As Integer)
+         m_ToolType = value
+      End Set
+   End Property
+
+   Public Property FootprintToolColor As Color3d
+      Get
+         Return m_FootprintToolColor
+      End Get
+      Set(value As Color3d)
+         m_FootprintToolColor = value
+      End Set
+   End Property
+
+   Public Property SawColor As SolidColorBrush
+      Get
+         Return m_cSawColor
+      End Get
+      Set(value As SolidColorBrush)
+         m_cSawColor = value
+      End Set
+   End Property
+
+   Sub New(sMachining As String, sToolName As String, sToolPos As String, cColor As Color3d)
+      m_Machining = sMachining
+      m_ToolPos = sToolPos
+      m_ToolName = sToolName
+      m_FootprintToolColor = cColor
+      m_cSawColor = New SolidColorBrush(Color.FromRgb(m_FootprintToolColor.R, m_FootprintToolColor.G, m_FootprintToolColor.B))
+   End Sub
+
+End Class

CadCuts/ChooseTestToolWD.xaml

@@ -0,0 +1,61 @@
+<Window x:Class="ChooseTestToolWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="OpenFile" Height="382.6" Width="426.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
+
+   <Border Style="{DynamicResource OmagCut_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.5*"/>
+            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="0.5*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+         </Grid.RowDefinitions>
+
+         <TextBlock Name="FilePathTxBl" Grid.Column="1" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+         <!--TextAlignment="Center"
+                  FontSize="20"
+                  VerticalAlignment="Center"-->
+         <ListBox Name="SetUpToolListBox" Grid.Column="1" Grid.Row="2"
+                  ItemsSource="{Binding ItemList}">
+            <ListBox.ItemTemplate>
+               <DataTemplate>
+                  <TextBlock Text="{Binding ToolAlias}" Style="{DynamicResource OmagCut_ListBoxTextBlock}" />
+               </DataTemplate>
+            </ListBox.ItemTemplate>
+         </ListBox>
+
+         <Grid Grid.Column="1" Grid.Row="4">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+               <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+         </Grid>
+
+      </Grid>
+
+   </Border>
+
+</Window>

CadCuts/ChooseTestToolWD.xaml.vb

@@ -0,0 +1,289 @@
+Imports System.Collections.ObjectModel
+Imports EgtUILib
+
+Public Class ChooseTestToolWD
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_SetUpToolList As New ObservableCollection(Of TestTool)
+
+   Sub New(Owner As Window)
+      Me.Owner = Owner
+      InitializeComponent()
+   End Sub
+
+   Private Sub OpenFile_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' Posizione finestra
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+      ' Definizione del collegamento tra ItemList e ListBox1
+      SetUpToolListBox.ItemsSource = m_SetUpToolList
+      FilePathTxBl.Text = EgtMsg(90945)              ' Selezionare l'utensile da tastare
+   End Sub
+
+   Private Sub OpenFile_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
+      ' carico elenco degli utensili impostati attualmente in macchina (anche il laser!)
+      LoadSetUpTool()
+      ' ricerco l'utensile della lavorazione indicata
+      Dim Item As TestTool = m_SetUpToolList.FirstOrDefault(Function(x) x.ToolName = m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrToolFromSelectedSawCurv)
+      Dim Index As Integer = m_SetUpToolList.IndexOf(Item)
+      If Index < 0 Then
+         Index = 0
+      End If
+      ' se presente seleziono il primo elemento
+      If m_SetUpToolList.Count > 0 Then
+         SetUpToolListBox.SelectedItem = m_SetUpToolList(Index)
+         OkBtn.IsEnabled = True
+      Else
+         OkBtn.IsEnabled = False
+      End If
+   End Sub
+
+   Private Function LoadSetUpTool() As Boolean
+
+      Dim sNameTool As String = String.Empty
+
+      sNameTool = "Laser point"
+      If Not String.IsNullOrEmpty(sNameTool) Then
+         ' Imposto laser di puntamento
+         m_SetUpToolList.Add(New TestTool(sNameTool, ""))
+      End If
+
+      sNameTool = m_MainWindow.m_CurrentMachine.sCurrWaterJet
+      If Not String.IsNullOrEmpty(sNameTool) Then
+         ' Imposto WJ
+         m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+      End If
+
+      Select Case m_MainWindow.m_CurrentMachine.MountedToolConfig
+         Case CurrentMachine.MountedToolConfigs.SAW
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            Return True
+         Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrMill
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la fresa
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrDrill
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto il foretto
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            Return True
+         Case CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            ' Recupero tutti gli utensili attrezzati (nel ToolChanger e nel ManualToolChanger)
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+               'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+               sNameTool = ToolChangerPos.sTool
+               If Not String.IsNullOrEmpty(sNameTool) Then
+                  ' Imposto la lama
+                  m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+               End If
+            Next
+            Return True
+         Case CurrentMachine.MountedToolConfigs.TOOLCHANGER
+            ' Recupero tutti gli utensili attrezzati (nel ToolChanger e nel ManualToolChanger)
+            sNameTool = m_MainWindow.m_CurrentMachine.sCurrSaw
+            If Not String.IsNullOrEmpty(sNameTool) Then
+               ' Imposto la lama
+               m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+            End If
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            Return True
+         Case CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            For Each ToolChangerPos As ToolChangerPos In m_MainWindow.m_CurrentMachine.ManualToolChanger
+               If Not String.IsNullOrWhiteSpace(ToolChangerPos.sTool) Then
+                  'm_SetUpToolList.Add(New ToolPos(ToolChangerPos.sTool, ToolChangerPos.sName, False))
+                  sNameTool = ToolChangerPos.sTool
+                  If Not String.IsNullOrEmpty(sNameTool) Then
+                     ' Imposto la lama
+                     m_SetUpToolList.Add(New TestTool(sNameTool, sNameTool))
+                  End If
+               End If
+            Next
+            Return True
+         Case Else
+            Return False
+      End Select
+      Return True
+   End Function
+
+   Private Sub SetUpToolListBox_PreviewMouseUp(sender As Object, e As MouseButtonEventArgs) Handles SetUpToolListBox.PreviewMouseUp
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      End If
+      ' A seconda del tipo
+      OkBtn.IsEnabled = True
+   End Sub
+
+   Private Sub SetUpToolListBox_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles SetUpToolListBox.SelectionChanged
+      ' Disabilito Ok
+      OkBtn.IsEnabled = False
+      ' Recupero item selezionato
+      If SetUpToolListBox.SelectedItems.Count() = 0 Then
+         Return
+      Else
+         OkBtn.IsEnabled = True
+      End If
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      DialogResult = True
+   End Sub
+
+   ' restituisce l'oggetto selezionato in elenco e lo imposta come attivo
+   Friend Function GetSelectedTool() As TestTool
+      Dim SelTestTool As TestTool = DirectCast(SetUpToolListBox.SelectedItem, TestTool)
+      If SelTestTool.ToolAlias = "Laser point" Then
+         SelTestTool.ToolHead = "H3"
+         SelTestTool.ToolExit = 1
+         SelTestTool.ToolIsSaw = False
+         SelTestTool.ToolIsLaser = True
+      Else
+         EgtTdbSetCurrTool(SelTestTool.ToolName)
+         Dim sHeadTool As String = String.Empty
+         Dim nExitTool As Integer = 0
+         Dim sTypeTool As String = String.Empty
+         Dim nTypeTool As Integer
+         EgtTdbGetCurrToolParam(MCH_TP.TYPE, nTypeTool)
+         EgtTdbGetCurrToolParam(MCH_TP.HEAD, sHeadTool)
+         EgtTdbGetCurrToolParam(MCH_TP.EXIT_, nExitTool)
+         EgtTdbGetCurrToolParam(MCH_TP.TYPE, sTypeTool)
+         SelTestTool.ToolHead = sHeadTool
+         SelTestTool.ToolExit = nExitTool
+         SelTestTool.ToolType = nTypeTool
+         SelTestTool.ToolIsSaw = (nTypeTool = MCH_TY.SAW_STD)
+         SelTestTool.ToolIsLaser = False
+      End If
+
+      Return SelTestTool
+   End Function
+
+End Class
+
+Public Class TestTool
+
+   Private m_ToolAlias As String = String.Empty
+   Private m_ToolName As String = String.Empty
+   Private m_ToolHead As String = "H1"
+   Private m_ToolExit As Integer = 1
+   Private m_ToolIsSaw As Boolean = False
+   Private m_ToolIsLaser As Boolean = False
+   Private m_ToolType As Integer = -1
+
+   Public Property ToolAlias As String
+      Get
+         Return m_ToolAlias
+      End Get
+      Set(value As String)
+         m_ToolAlias = value
+      End Set
+   End Property
+
+   Public Property ToolName As String
+      Get
+         Return m_ToolName
+      End Get
+      Set(value As String)
+         m_ToolName = value
+      End Set
+   End Property
+
+   Public Property ToolHead As String
+      Get
+         Return m_ToolHead
+      End Get
+      Set(value As String)
+         m_ToolHead = value
+      End Set
+   End Property
+
+   Public Property ToolExit As Integer
+      Get
+         Return m_ToolExit
+      End Get
+      Set(value As Integer)
+         m_ToolExit = value
+      End Set
+   End Property
+
+   Public Property ToolType As Integer
+      Get
+         Return m_ToolType
+      End Get
+      Set(value As Integer)
+         m_ToolType = value
+      End Set
+   End Property
+
+   Public Property ToolIsSaw As Boolean
+      Get
+         Return m_ToolIsSaw
+      End Get
+      Set(value As Boolean)
+         m_ToolIsSaw = value
+      End Set
+   End Property
+
+   Public Property ToolIsLaser As Boolean
+      Get
+         Return m_ToolIsLaser
+      End Get
+      Set(value As Boolean)
+         m_ToolIsLaser = value
+      End Set
+   End Property
+
+   Sub New(sToolAlias As String, sToolName As String)
+      m_ToolAlias = sToolAlias
+      m_ToolName = sToolName
+   End Sub
+
+End Class

CadCuts/EditValueWD.xaml

@@ -1,10 +1,10 @@
 <Window x:Class="EditValueWD"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   FontFamily="{DynamicResource OmagCut_Font}"
-   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
-   Title="EditValueWD" Height="255.9" Width="426.5" ShowInTaskbar="False">
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+        Title="EditValueWD" Height="255.9" Width="426.5" ShowInTaskbar="False">
 
    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
    <Border Style="{DynamicResource OmagCut_Border}">
@@ -23,9 +23,17 @@
          </Grid.RowDefinitions>
 
          <TextBlock Name="ValueTxbl" Grid.Column="1" Grid.Row="0"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="ValueTxBx" Grid.Column="1" Grid.Row="1"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+         <ComboBox Name="ValueCmBx" Grid.Column="1" Grid.Row="1">
+            <ComboBox.ItemTemplate>
+               <DataTemplate>
+                  <TextBlock Text="{Binding}" FontSize="20" />
+               </DataTemplate>
+            </ComboBox.ItemTemplate>
+         </ComboBox>
 
          <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1">
             <Grid.ColumnDefinitions>
@@ -39,12 +47,12 @@
             <Button Name="OkBtn" Grid.Column="1"
                     IsDefault="True"
                     Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
             <Button Name="ExitBtn" Grid.Column="3"
                     IsCancel="True"
                     Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
 
          </Grid>

CadCuts/EditValueWD.xaml.vb

@@ -1,6 +1,4 @@
-Imports System.IO
-Imports EgtUILib
-Imports EgtWPFLib
+Imports System.Collections.ObjectModel
 
 Public Class EditValueWD
 
@@ -8,29 +6,77 @@ Public Class EditValueWD
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private m_sMsg As String = "Value"
    Private m_sValue As String = ""
+   Private m_sList As ObservableCollection(Of String)
+   Private m_IsText As Boolean = True
 
+   ' avvia la visualizzazione della textbox
    Sub New(Owner As Window, Optional sMsg As String = "")
       Me.Owner = Owner
       m_sMsg = sMsg
+      m_IsText = True
       InitializeComponent()
    End Sub
 
-   Friend Function SetVal( dVal As Double) As Boolean
-      m_sValue = DoubleToString( dVal, 3)
+   Friend Function SetVal(dVal As Double, Optional ByVal bLen As Boolean = False) As Boolean
+      If bLen Then
+         m_sValue = LenToString(dVal, 3)
+      Else
+         m_sValue = DoubleToString(dVal, 3)
+      End If
       ValueTxBx.Text = m_sValue
-      Return true
+      Return True
    End Function
 
-   Friend Function GetVal() As Double
+   ' avvia la visualizzazione della combobox
+   Sub New(Owner As Window, sList As ObservableCollection(Of String), Optional sMsg As String = "")
+      Me.Owner = Owner
+      m_sMsg = sMsg
+      m_IsText = False
+      InitializeComponent()
+      m_sList = sList
+      SetComboBox(m_sList)
+   End Sub
+
+   Friend Function GetVal(Optional ByVal bLen As Boolean = False) As Double
       Dim dVal As Double = 0
-      StringToDouble( m_sValue, dVal)
+      If bLen Then
+         StringToLen(m_sValue, dVal)
+      Else
+         StringToDouble(m_sValue, dVal)
+      End If
       Return dVal
    End Function
 
+   Friend Function SetComboBox(sList As ObservableCollection(Of String)) As Boolean
+      ValueCmBx.ItemsSource = sList
+      Return True
+   End Function
+
+   Friend Function SetItemComboBox(sItem As String) As Boolean
+      For Each MyItem As String In ValueCmBx.ItemsSource
+         If MyItem = sItem Then
+            ValueCmBx.SelectedItem = MyItem
+         End If
+      Next
+      Return True
+   End Function
+
+   Friend Function GetItemComboBox() As String
+      Dim sVal As String = ValueCmBx.SelectedItem
+      Return sVal
+   End Function
+
    Private Sub EditValueWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
       ValueTxbl.Text = m_sMsg
+      If m_IsText Then
+         ValueCmBx.Visibility = Visibility.Collapsed
+         ValueTxBx.Visibility = Visibility.Visible
+      Else
+         ValueCmBx.Visibility = Visibility.Visible
+         ValueTxBx.Visibility = Visibility.Collapsed
+      End If
    End Sub
 
    Private Sub EditValueWD_Rendered(sender As Object, e As EventArgs) Handles Me.ContentRendered

CadCuts/FastGridSlabManager.xaml

@@ -7,7 +7,6 @@
              mc:Ignorable="d" 
              d:DesignHeight="853.3" d:DesignWidth="1280">
 
-
    <!-- Definizione della NestPage -->
    <Grid Name="FastGridSlabGrid" >
       <Grid.ColumnDefinitions>
@@ -46,7 +45,7 @@
                        Grid.Row="0" Grid.Column="0"
                        Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
             <EgtWPFLib:EgtTextBox Name="OrderTxBx"
-                                 Grid.Row="0" Grid.Column="1"
+                                  Grid.Row="0" Grid.Column="1"
                                   Margin="13,0,6,0"
                                   Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
 
@@ -67,11 +66,11 @@
 
                <UniformGrid Columns="3" >
                   <ToggleButton Name="Type1Btn"
-                          Style="{StaticResource OmagCut_DisabledYellowToggleButton}"/>
+                                Style="{DynamicResource OmagCut_DisabledYellowToggleButton}"/>
                   <ToggleButton Name="Type2Btn"
-                          Style="{StaticResource OmagCut_DisabledYellowToggleButton}" />
+                                Style="{DynamicResource OmagCut_DisabledYellowToggleButton}" />
                   <ToggleButton Name="Type3Btn"
-                          Style="{StaticResource OmagCut_DisabledYellowToggleButton}" />
+                                Style="{DynamicResource OmagCut_DisabledYellowToggleButton}" />
                </UniformGrid>
 
                <Grid>
@@ -82,11 +81,11 @@
                      <ColumnDefinition Width="0.5*"/>
                   </Grid.ColumnDefinitions>
                   <ToggleButton Name="Type4Btn"
-                          Grid.Column="1"
-                          Style="{StaticResource OmagCut_DisabledYellowToggleButton}"/>
+                                Grid.Column="1"
+                                Style="{DynamicResource OmagCut_DisabledYellowToggleButton}"/>
                   <ToggleButton Name="Type5Btn"
-                          Grid.Column="2"
-                          Style="{StaticResource OmagCut_DisabledYellowToggleButton}"/>
+                                Grid.Column="2"
+                                Style="{DynamicResource OmagCut_DisabledYellowToggleButton}"/>
                </Grid>
 
             </UniformGrid>
@@ -94,13 +93,13 @@
 
          <Button Name="ConfirmOrderBtn"
                  Grid.Row="3"
-                 Style="{StaticResource OmagCut_YellowTextButton}" />
+                 Style="{DynamicResource OmagCut_YellowTextButton}" />
 
          <UniformGrid Grid.Row="4" Columns="2" >
             <Button Name="InsertPiecesBtn"
-                    Style="{StaticResource OmagCut_YellowTextButton}" />
+                    Style="{DynamicResource OmagCut_YellowTextButton}" />
             <ToggleButton Name="LastSlabBtn"
-                          Style="{StaticResource OmagCut_YellowToggleButton}" />
+                          Style="{DynamicResource OmagCut_YellowToggleButton}" />
          </UniformGrid>
 
       </Grid>

CadCuts/FastGridSlabManager.xaml.vb

@@ -19,12 +19,12 @@ Public Class FastGridSlabManager
 
    Private Sub FastGridSlabManager_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Imposto i messaggi letti dal file dei messaggi
-      OrderTxBl.Text = EgtMsg(MSG_FASTGRIDPAGEUC)                    'Order name - Nome ordine
-      CurrSlabTxBl.Text = EgtMsg(MSG_FASTGRIDPAGEUC + 1)             'Curr slab - Lastra corrente
-      PieceTypeGpBx.Header = EgtMsg(MSG_FASTGRIDPAGEUC + 3)          'Piece type - Tipo pezzo
-      ConfirmOrderBtn.Content = EgtMsg(MSG_FASTGRIDPAGEUC + 5)       'Confirm order - Conferma ordine
-      InsertPiecesBtn.Content = EgtMsg(MSG_FASTGRIDPAGEUC + 4)       'Insert pieces - Inserisci pezzi
-      LastSlabBtn.Content = EgtMsg(MSG_FASTGRIDPAGEUC + 2)           'Last slab - Ultima lastra
+      OrderTxBl.Text = EgtMsg(90480)                ' Order name - Nome ordine
+      CurrSlabTxBl.Text = EgtMsg(90481)             ' Curr slab - Lastra corrente
+      PieceTypeGpBx.Header = EgtMsg(90483)          ' Piece type - Tipo pezzo
+      ConfirmOrderBtn.Content = EgtMsg(90485)       ' Confirm order - Conferma ordine
+      InsertPiecesBtn.Content = EgtMsg(90484)       ' Insert pieces - Inserisci pezzi
+      LastSlabBtn.Content = EgtMsg(90482)           ' Last slab - Ultima lastra
       ' Leggo dati da ini
       GetPrivateProfileString(S_FASTGRID, K_FG_ORDER, "", OrderTxBx.Text, m_MainWindow.GetIniFile())
       m_nCurrSlab = GetPrivateProfileInt(S_FASTGRID, K_FG_CURRSLAB, 0, m_MainWindow.GetIniFile())

CadCuts/ModifStartEndWD.xaml

@@ -1,100 +1,100 @@
 <Window x:Class="ModifStartEndWD"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   FontFamily="{DynamicResource OmagCut_Font}"
-   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
-   Title="ModifStartEndWD" Height="405.9" Width="426.5" ShowInTaskbar="False">
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+        Title="ModifStartEndWD" Height="405.9" Width="426.5" ShowInTaskbar="False">
 
-        <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
-        <Border Style="{DynamicResource OmagCut_Border}">
-            <Grid x:Name="SaveNameGrid">
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="0.5*"/>
-                    <ColumnDefinition Width="2*"/>
-                    <ColumnDefinition Width="2*"/>
-                    <ColumnDefinition Width="0.5*"/>
-                </Grid.ColumnDefinitions>
-                <Grid.RowDefinitions>
-                    <!--<RowDefinition Height="0.5*"/>
+   <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+   <Border Style="{DynamicResource OmagCut_Border}">
+      <Grid x:Name="SaveNameGrid">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.5*"/>
+            <ColumnDefinition Width="2*"/>
+            <ColumnDefinition Width="2*"/>
+            <ColumnDefinition Width="0.5*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <!--<RowDefinition Height="0.5*"/>
                     <RowDefinition Height="0.5*"/>
                     <RowDefinition Height="0.5*"/>
                     <RowDefinition Height="1*"/>
                     <RowDefinition Height="0.5*"/>-->
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="1*"/>
-                    <RowDefinition Height="0.5*"/>
-            </Grid.RowDefinitions>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+         </Grid.RowDefinitions>
 
-            <TextBlock Name="TitleTxbl" Grid.Column="1" Grid.ColumnSpan="2" Grid.Row="0"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+         <TextBlock Name="TitleTxbl" Grid.Column="1" Grid.ColumnSpan="2" Grid.Row="0"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
 
-            <TextBlock Name="HoleTxbl" Grid.Column="1" Grid.Row="1"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-            <CheckBox Name="HoleChBx" Grid.Column="2" Grid.Row="1" HorizontalAlignment="Center"
-            Style="{DynamicResource OmagCut_CheckBox}"/>
+         <TextBlock Name="HoleTxbl" Grid.Column="1" Grid.Row="1"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+         <CheckBox Name="HoleChBx" Grid.Column="2" Grid.Row="1" HorizontalAlignment="Center"
+                   Style="{DynamicResource OmagCut_CheckBox}"/>
 
-            <TextBlock Name="ElongationTxbl" Grid.Column="1" Grid.Row="2"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="ElongationTxBx" Grid.Column="2" Grid.Row="2"
-            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="ElongationTxbl" Grid.Column="1" Grid.Row="2"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="ElongationTxBx" Grid.Column="2" Grid.Row="2"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-            <TextBlock Name="LeadInTxbl" Grid.Column="1" Grid.Row="3"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-            <ComboBox Name="LeadInCmBx" Grid.Column="2" Grid.Row="3"
-            Style="{DynamicResource OmagCut_ComboBox}"/>
+         <TextBlock Name="LeadInTxbl" Grid.Column="1" Grid.Row="3"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+         <ComboBox Name="LeadInCmBx" Grid.Column="2" Grid.Row="3"
+                   Style="{DynamicResource OmagCut_ComboBox}"/>
 
-            <TextBlock Name="LeadOutTxbl" Grid.Column="1" Grid.Row="3"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-            <ComboBox Name="LeadOutCmBx" Grid.Column="2" Grid.Row="3"
-            Style="{DynamicResource OmagCut_ComboBox}"/>
+         <TextBlock Name="LeadOutTxbl" Grid.Column="1" Grid.Row="3"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+         <ComboBox Name="LeadOutCmBx" Grid.Column="2" Grid.Row="3"
+                   Style="{DynamicResource OmagCut_ComboBox}"/>
 
-            <TextBlock Name="TangDistTxbl" Grid.Column="1" Grid.Row="4"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="LiTangDistTxBx" Grid.Column="2" Grid.Row="4"
-            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="TangDistTxbl" Grid.Column="1" Grid.Row="4"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="LiTangDistTxBx" Grid.Column="2" Grid.Row="4"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-            <TextBlock Name="PerpDistTxbl" Grid.Column="1" Grid.Row="5"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="LiPerpDistTxBx" Grid.Column="2" Grid.Row="5"
-            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="PerpDistTxbl" Grid.Column="1" Grid.Row="5"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="LiPerpDistTxBx" Grid.Column="2" Grid.Row="5"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-            <EgtWPFLib:EgtTextBox Name="LoTangDistTxBx" Grid.Column="2" Grid.Row="4"
-            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <EgtWPFLib:EgtTextBox Name="LoTangDistTxBx" Grid.Column="2" Grid.Row="4"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-            <EgtWPFLib:EgtTextBox Name="LoPerpDistTxBx" Grid.Column="2" Grid.Row="5"
-            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <EgtWPFLib:EgtTextBox Name="LoPerpDistTxBx" Grid.Column="2" Grid.Row="5"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-            <Grid Name="ButtonsGrid" Grid.Column="1" Grid.ColumnSpan="2" Grid.Row="7" Grid.RowSpan="1">
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="0.5*"/>
-                        <ColumnDefinition Width="1*"/>
-                        <ColumnDefinition Width="1*"/>
-                        <ColumnDefinition Width="1*"/>
-                        <ColumnDefinition Width="0.5*"/>
-                    </Grid.ColumnDefinitions>
+         <Grid Name="ButtonsGrid" Grid.Column="1" Grid.ColumnSpan="2" Grid.Row="7" Grid.RowSpan="1">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
 
-                    <Button Name="OkBtn" Grid.Column="1"
+            <Button Name="OkBtn" Grid.Column="1"
                     Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-                        <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                    </Button>
-                    <Button Name="ExitBtn" Grid.Column="3"
+               <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="3"
                     IsCancel="True"
                     Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                    </Button>
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
 
-                </Grid>
+         </Grid>
 
-            </Grid>
+      </Grid>
 
-        </Border>
+   </Border>
 
-    </Window>
+</Window>
 

CadCuts/ModifStartEndWD.xaml.vb

@@ -1,7 +1,5 @@
-Imports System.IO
-Imports System.Collections.ObjectModel
+Imports System.Collections.ObjectModel
 Imports EgtUILib
-Imports EgtWPFLib
 
 Public Class ModifStartEndWD
 
@@ -47,16 +45,16 @@ Public Class ModifStartEndWD
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
 
       ' Imposto i messaggi letti dal file dei messaggi
-      ElongationTxbl.Text = EgtMsg(MSG_SPLITPAGEUC + 35)
-      HoleTxbl.Text = EgtMsg(90875)
-      LeadInTxbl.Text = EgtMsg(90769)
-      LeadOutTxbl.Text = EgtMsg(90771)
-      TangDistTxbl.Text = EgtMsg(90890)
-      PerpDistTxbl.Text = EgtMsg(90891)
+      ElongationTxbl.Text = EgtMsg(90375)    ' Allungamento
+      HoleTxbl.Text = EgtMsg(90875)          ' Foro di attacco
+      LeadInTxbl.Text = EgtMsg(90769)        ' Attacco
+      LeadOutTxbl.Text = EgtMsg(90771)       ' Uscita
+      TangDistTxbl.Text = EgtMsg(90890)      ' Dist. tang.
+      PerpDistTxbl.Text = EgtMsg(90891)      ' Dist. perp.
 
       ' Mostro/Nascondo elementi in base a Inizio/Fine Modif.
       If bIsLeadIn Then
-         TitleTxbl.Text = EgtMsg(MSG_SPLITPAGEUC + 33)
+         TitleTxbl.Text = EgtMsg(90373)      ' Inizio Modif.
          HoleTxbl.Visibility = Windows.Visibility.Visible
          HoleChBx.Visibility = Windows.Visibility.Visible
          LeadInTxbl.Visibility = Windows.Visibility.Visible
@@ -64,16 +62,16 @@ Public Class ModifStartEndWD
          LeadOutTxbl.Visibility = Windows.Visibility.Hidden
          LeadOutCmBx.Visibility = Windows.Visibility.Hidden
          LeadInType = New ObservableCollection(Of IdNameStruct)(
-                                          {New IdNameStruct(MCH_MIL_LI.NONE, EgtMsg(MSG_COMBOBOXPARAM + 42)),
-                                           New IdNameStruct(MCH_MIL_LI.LINEAR, EgtMsg(MSG_COMBOBOXPARAM + 46)),
-                                           New IdNameStruct(MCH_MIL_LI.TANGENT, EgtMsg(MSG_COMBOBOXPARAM + 47))})
+                                          {New IdNameStruct(MCH_MIL_LI.NONE, EgtMsg(90842)),       ' Nessuno
+                                           New IdNameStruct(MCH_MIL_LI.LINEAR, EgtMsg(90846)),     ' Lineare
+                                           New IdNameStruct(MCH_MIL_LI.TANGENT, EgtMsg(90847))})   ' Tangente
          LeadInCmBx.ItemsSource = LeadInType
          LiTangDistTxBx.Visibility = Windows.Visibility.Visible
          LiPerpDistTxBx.Visibility = Windows.Visibility.Visible
          LoTangDistTxBx.Visibility = Windows.Visibility.Hidden
          LoPerpDistTxBx.Visibility = Windows.Visibility.Hidden
       Else
-         TitleTxbl.Text = EgtMsg(MSG_SPLITPAGEUC + 34)
+         TitleTxbl.Text = EgtMsg(90374)      ' Fine Modif.
          HoleTxbl.Visibility = Windows.Visibility.Hidden
          HoleChBx.Visibility = Windows.Visibility.Hidden
          LeadInTxbl.Visibility = Windows.Visibility.Hidden
@@ -81,10 +79,10 @@ Public Class ModifStartEndWD
          LeadOutTxbl.Visibility = Windows.Visibility.Visible
          LeadOutCmBx.Visibility = Windows.Visibility.Visible
          LeadOutType = New ObservableCollection(Of IdNameStruct)(
-                                         {New IdNameStruct(MCH_MIL_LO.NONE, EgtMsg(MSG_COMBOBOXPARAM + 42)),
-                                          New IdNameStruct(MCH_MIL_LO.LINEAR, EgtMsg(MSG_COMBOBOXPARAM + 46)),
-                                          New IdNameStruct(MCH_MIL_LO.TANGENT, EgtMsg(MSG_COMBOBOXPARAM + 47)),
-                                          New IdNameStruct(MCH_MIL_LO.AS_LI, EgtMsg(MSG_COMBOBOXPARAM + 50))})
+                                         {New IdNameStruct(MCH_MIL_LO.NONE, EgtMsg(90842)),     ' Nessuno
+                                          New IdNameStruct(MCH_MIL_LO.LINEAR, EgtMsg(90846)),   ' Lineare
+                                          New IdNameStruct(MCH_MIL_LO.TANGENT, EgtMsg(90847)),  ' Tangente
+                                          New IdNameStruct(MCH_MIL_LO.AS_LI, EgtMsg(90850))})   ' Come attacco
          LeadOutCmBx.ItemsSource = LeadOutType
          LiTangDistTxBx.Visibility = Windows.Visibility.Hidden
          LiPerpDistTxBx.Visibility = Windows.Visibility.Hidden

CadCuts/MoveRawPartPage.xaml

@@ -1,11 +1,11 @@
 <UserControl x:Class="MoveRawPartPage"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="853.3" d:DesignWidth="1280">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="853.3" d:DesignWidth="1280">
 
    <!-- Definizione della SplitPage -->
    <Grid Name="SplitPageGrid" >
@@ -36,10 +36,10 @@
             </Grid.ColumnDefinitions>
 
             <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
             <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
+               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{DynamicResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
                   <Image.RenderTransform>
                      <TransformGroup>
                         <RotateTransform Angle="180"/>
@@ -72,47 +72,47 @@
          </Grid.RowDefinitions>
 
          <Button Name="TopLBtn" Grid.Column="0" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource TopLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                 Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+            <Image Source="{DynamicResource TopLeftImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
          </Button>
          <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                 Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+            <Image Source="{DynamicResource UpArrowImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
          </Button>
          <Button Name="TopRBtn" Grid.Column="2" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource TopRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                 Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+            <Image Source="{DynamicResource TopRightImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
          </Button>
          <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
-         Style="{DynamicResource OmagCut_LeftGrayGradientYellowButton}">
-            <Image Source="{DynamicResource LeftArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                 Style="{DynamicResource OmagCut_LeftGrayGradientYellowButton}">
+            <Image Source="{DynamicResource LeftArrowImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
          </Button>
          <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="1" Grid.Row="2" Width="50"
-            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
          <Button Name="ResetBtn" Grid.Column="1" Grid.Row="2"
-            Style="{DynamicResource OmagCut_YellowTextButton}">
+                 Style="{DynamicResource OmagCut_YellowTextButton}">
          </Button>
          <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
-         Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RightArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                 Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+            <Image Source="{DynamicResource RightArrowImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
          </Button>
          <Button Name="BottomLBtn" Grid.Column="0" Grid.Row="3"
-         Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource BottomLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                 Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
+            <Image Source="{DynamicResource BottomLeftImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
          </Button>
          <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
-         Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                 Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
+            <Image Source="{DynamicResource DownArrowImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
          </Button>
          <Button Name="BottomRBtn" Grid.Column="2" Grid.Row="3"
-         Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
+                 Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
             <Image Source="{DynamicResource BottomRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
          </Button>
 
          <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
-            Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-                <Image Source="{DynamicResource CounterClockwiseRotateImg}" Width="64" Height="65" HorizontalAlignment="Center"
-               VerticalAlignment="Center" />
+                 Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+            <Image Source="{DynamicResource CounterClockwiseRotateImg}" Width="64" Height="65" HorizontalAlignment="Center"
+                   VerticalAlignment="Center" />
          </Button>
 
          <Grid Name="RotationAngle" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center" VerticalAlignment="Center">
@@ -120,21 +120,28 @@
                <ColumnDefinition Width="Auto"/>
                <ColumnDefinition Width="Auto"/>
             </Grid.ColumnDefinitions>
-            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50"
-            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
-            Text="°"/>
+                       Text="°"/>
          </Grid>
 
          <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
-            Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                 Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
             <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
-               VerticalAlignment="Center" />
+                   VerticalAlignment="Center" />
          </Button>
 
+         <!--Gestione sfridi-->
+         <Button Name="RemovePartBtn" Grid.ColumnSpan="2" Grid.Row="6"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-         <Button Name="RemovePartBtn" Grid.ColumnSpan="3" Grid.Row="6"
-         Style="{DynamicResource OmagCut_YellowTextButton}"/>
+         <Button Name="ScrapsBtn" Grid.Column="3" Grid.Row="6"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+         <!--Gestione scarico pezzi-->
+         <Button Name="UnloadPartsBtn" Grid.ColumnSpan="2" Grid.Row="7"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
          <Grid Grid.Row="7" Grid.ColumnSpan="3">
             <Grid.ColumnDefinitions>
@@ -155,8 +162,10 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="10*"/>
          </Grid.ColumnDefinitions>
-
-
+         <!-- Inserimento della pausa durante il movimento sulla tavola di scarico-->
+         <Button Name="PauseBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
       </Grid>
 
    </Grid>

CadCuts/NestPageUC.xaml

@@ -1,14 +1,14 @@
 <UserControl x:Class="NestPageUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="NestPage_Initialized" Loaded="NestPage_Loaded" Unloaded="NestPage_Unloaded">
-      
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="NestPage_Initialized" Loaded="NestPage_Loaded" Unloaded="NestPage_Unloaded">
+
    <!-- Definizione della NestPage -->
-   <Grid Name="NestPageGrid" >
+   <Grid Name="NestPageGrid">
       <Grid.ColumnDefinitions>
          <ColumnDefinition Width="3*"/>
          <ColumnDefinition Width="12*"/>
@@ -38,39 +38,39 @@
          </Grid.RowDefinitions>
 
          <Button Name="PartRotOnBtn" Grid.Column="0" Grid.Row="1"
-            Style="{DynamicResource OmagCut_YellowIconButton}" Width="48" Height="48">
+                 Style="{DynamicResource OmagCut_YellowIconButton}" Width="48" Height="48">
             <Image Source="{DynamicResource PartRotOnImg}" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
          </Button>
          <Button Name="PartRotOffBtn" Grid.Column="2" Grid.Row="1"
-            Style="{DynamicResource OmagCut_YellowIconButton}" Width="48" Height="48">
+                 Style="{DynamicResource OmagCut_YellowIconButton}" Width="48" Height="48">
             <Image Source="{DynamicResource PartRotOffImg}" HorizontalAlignment="Center"
-               VerticalAlignment="Center" />
+                   VerticalAlignment="Center" />
          </Button>
 
          <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
-            Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+                 Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
             <Image Source="{DynamicResource UpArrowImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
          </Button>
          <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
-            Style="{DynamicResource OmagCut_LeftGrayGradientYellowButton}">
+                 Style="{DynamicResource OmagCut_LeftGrayGradientYellowButton}">
             <Image Source="{DynamicResource LeftArrowImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
          </Button>
          <ToggleButton Name="MaximizeMoveBtn" Grid.Column="1" Grid.Row="2"
-            Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                       Style="{DynamicResource OmagCut_YellowIconToggleButton}">
             <Image Source="../Resources/MaxMove.png" Style="{DynamicResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
          <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
-            Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                 Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
             <Image Source="{DynamicResource RightArrowImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
          </Button>
 
          <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="0" Grid.Row="3" Width="50"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
-            Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-                <Image Source="{DynamicResource DownArrowImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+                 Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
+            <Image Source="{DynamicResource DownArrowImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
          </Button>
 
          <Grid Grid.Column="2" Grid.Row="3" HorizontalAlignment="Center" VerticalAlignment="Center">
@@ -78,39 +78,81 @@
                <ColumnDefinition Width="Auto"/>
                <ColumnDefinition Width="Auto"/>
             </Grid.ColumnDefinitions>
-            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
-               Text="°"/>
+                       Text="°"/>
          </Grid>
 
          <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
-            Style="{DynamicResource OmagCut_LeftGrayGradientYellowButton}">
+                 Style="{DynamicResource OmagCut_LeftGrayGradientYellowButton}">
             <Image Source="{DynamicResource CounterClockwiseRotateImg}" Width="64" Height="65" HorizontalAlignment="Center"
-               VerticalAlignment="Center" />
+                   VerticalAlignment="Center" />
          </Button>
          <ToggleButton Name="MagneticPiecesBtn" Grid.Column="1" Grid.Row="4"
-            Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                      Style="{DynamicResource OmagCut_YellowIconToggleButton}">
             <Image Source="{DynamicResource AlignPiecesImg}" Width="65" Height="65" HorizontalAlignment="Center"
-               VerticalAlignment="Center" />
+                   VerticalAlignment="Center" />
          </ToggleButton>
          <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
-            Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                 Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
             <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
-               VerticalAlignment="Center" />
+                   VerticalAlignment="Center" />
          </Button>
-         
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
-            <Button Name="StorePartBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
+
+         <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3">
+            <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Inserisci-pezzoImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="StorePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Parcheggia-pezzoImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <ToggleButton Name="StartCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource StartWJImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
          </UniformGrid>
 
-         <Button Name="RemovePartBtn" Grid.ColumnSpan="3" Grid.Row="6"
-            Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
+         <!--Comandi attivi solo in madalità REG-->
+         <UniformGrid Name ="UG0_Reg" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" Visibility="Hidden">
+            <Button Name="AdjustPointRegBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Muovi-grezzoImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <ToggleButton Name="ActivatePointRegBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource ON_OFF-REGImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
+         </UniformGrid>
 
-         <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="SelectAllBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
-            <Button Name="DeselectAllBtn" Style="{DynamicResource OmagCut_YellowTextButton}" Padding="1"/>
+         <UniformGrid Name ="UG1"  Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="3" >
+            <Button Name="RemovePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Elimina-pezzoImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <ToggleButton Name="DragRectangleBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Drag_RectangleImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
+            <ToggleButton Name="SplitCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource SplitWJImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
+         </UniformGrid>
+
+         <!--Comandi attivi solo in madalità REG-->
+         <UniformGrid Name ="UG1_Reg" Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="3" Visibility="Hidden">
+            <Button Visibility="Hidden"/>
+            <ToggleButton Name="ModPointRegBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Move-Spot-RegImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
+            <Button Visibility="Hidden"/>
+         </UniformGrid>
+
+         <UniformGrid Name ="UG2" Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="3" >
+            <Button Name="SelectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Seleziona-tuttoImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="DeselectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Deseleziona-tuttoImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <ToggleButton Name="ParkIndBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Name="ParkIndImg" Source="{DynamicResource ParkingImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
          </UniformGrid>
 
       </Grid>
@@ -126,7 +168,6 @@
          </Grid.ColumnDefinitions>
 
       </Grid>
-
    </Grid>
-   
+
 </UserControl>

CadCuts/OpenFileWD.xaml

@@ -1,9 +1,9 @@
 <Window x:Class="OpenFileWD"
-    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-    xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-    FontFamily="{DynamicResource OmagCut_Font}"
-    Title="OpenFile" Height="682.6" Width="426.6" WindowStyle="None" ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" Background="Transparent">
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="OpenFile" Height="682.6" Width="426.6" WindowStyle="None" ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" Background="Transparent">
 
    <Border Style="{DynamicResource OmagCut_Border}">
       <Grid>
@@ -23,7 +23,7 @@
 
          <Label Name="FilePathTxBl" Grid.Column="1" Grid.Row="1" Foreground="White" FontSize="20" VerticalAlignment="Center"/>
          <ListBox Name="FileListBox" Grid.Column="1" Grid.Row="2" ItemTemplate="{DynamicResource DataTemplateItem}"
-               ItemsSource="{Binding ItemList}"/>
+                  ItemsSource="{Binding ItemList}"/>
 
          <Grid Grid.Column="1" Grid.Row="4">
             <Grid.ColumnDefinitions>
@@ -35,10 +35,10 @@
             </Grid.ColumnDefinitions>
 
             <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
-               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
             <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
 
          </Grid>

CadCuts/OpenFileWD.xaml.vb

@@ -9,6 +9,7 @@ Public Class OpenFileWD
    Private m_sCurrFile As String = String.Empty
    Private m_sExt As String = String.Empty
    Private m_sExt2 As String = String.Empty
+   Private n_sDeniedFiles As New List(Of String)
 
    Private m_OpenItemList As New ObservableCollection(Of IconListBoxItem)
 
@@ -27,6 +28,15 @@ Public Class OpenFileWD
       InitializeComponent()
    End Sub
 
+   Sub New(Owner As Window, sDir As String, sExt As String, sExt2 As String, DeniedFiles As List(Of String))
+      Me.Owner = Owner
+      m_sCurrDir = sDir
+      m_sExt = sExt
+      m_sExt2 = sExt2
+      n_sDeniedFiles = DeniedFiles
+      InitializeComponent()
+   End Sub
+
    Private Sub OpenFile_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Posizione finestra
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
@@ -71,13 +81,20 @@ Public Class OpenFileWD
       Dim FileI As FileInfo
       For Each FileI In vFileI
          Dim sExt As String = Path.GetExtension(FileI.Name).ToUpper()
-         If String.Compare(sExt, m_sExt, True) = 0 Or
-            String.Compare(sExt, m_sExt2, True) = 0 Then
+         Dim sFileName As String = Path.GetFileNameWithoutExtension(FileI.Name).ToUpper.Trim
+         Dim bDenied As Boolean = False
+         For Each ItemFile As String In n_sDeniedFiles
+            If ItemFile.ToUpper.Trim = sFileName Then
+               bDenied = True
+               Exit For
+            End If
+         Next
+         If (String.Compare(sExt, m_sExt, True) = 0 Or String.Compare(sExt, m_sExt2, True) = 0) And Not bDenied Then
             m_OpenItemList.Add(New IconListBoxItem(FileI.Name, 3))
          End If
       Next
-      ' riporto visualizzazione in cima alla lista (esiste sempre almeno un elemento)
-      FileListBox.ScrollIntoView(m_OpenItemList(0))
+         ' riporto visualizzazione in cima alla lista (esiste sempre almeno un elemento)
+         FileListBox.ScrollIntoView(m_OpenItemList(0))
       Return True
    End Function
 

CadCuts/SelParkIndWD.xaml

@@ -0,0 +1,95 @@
+<UserControl x:Class="SelParkIndWD"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             FontFamily="{DynamicResource OmagCut_Font}"
+             Background="Transparent">
+
+   <Border Style="{DynamicResource OmagCut_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.1*"/>
+            <ColumnDefinition Width="10*"/>
+            <ColumnDefinition Width="0.1*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.0*"/>
+            <RowDefinition Height="0.1*"/>
+            <RowDefinition Height="10*"/>
+            <RowDefinition Height="0.1*"/>
+            <RowDefinition Height="0.0*"/>
+         </Grid.RowDefinitions>
+
+         <TextBlock Name="FilePathTxBl" Grid.Column="1" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" 
+                    Visibility="Collapsed"/>
+         <!--TextAlignment="Center"
+               FontSize="20"
+               VerticalAlignment="Center"-->
+         <ListBox Name="ParkIndListBox" Grid.Column="1" Grid.Row="2"
+                  ItemsSource="{Binding ItemList}" ScrollViewer.CanContentScroll="False" ScrollViewer.HorizontalScrollBarVisibility="Hidden">
+            <ListBox.ItemTemplate>
+               <DataTemplate>
+                  <StackPanel Orientation="Vertical" >
+                     <UniformGrid Columns="2"  Visibility="{Binding TitleVisibility}">
+                        <StackPanel Orientation="Horizontal">
+                           <Image Source="{Binding ImgTab}" Height="20" Stretch="Uniform"/>
+                           <TextBlock Text="{Binding CountInTab}" Height="20" Width="30">
+                              <TextBlock.Style>
+                                 <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_ListBoxTextBlock}">
+                                    <Style.Triggers>
+                                       <DataTrigger Binding="{Binding IsStatusON}" Value="False">
+                                          <Setter Property="FontStyle" Value="Oblique"/>
+                                          <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                                       </DataTrigger>
+                                       <DataTrigger Binding="{Binding IsStatusON}" Value="True">
+                                          <Setter Property="Foreground" Value="black"/>
+                                       </DataTrigger>
+                                    </Style.Triggers>
+                                 </Style>
+                              </TextBlock.Style>
+                           </TextBlock>
+                        </StackPanel>
+                        <StackPanel Orientation="Horizontal">
+                           <Image Source="{Binding ImgPark}" Height="20" Stretch="Uniform"/>
+                           <TextBlock Text="{Binding CountInPark}" Height="20" Width="30">
+                              <TextBlock.Style>
+                                 <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_ListBoxTextBlock}">
+                                    <Style.Triggers>
+                                       <DataTrigger Binding="{Binding IsStatusON}" Value="False">
+                                          <Setter Property="FontStyle" Value="Oblique"/>
+                                          <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                                       </DataTrigger>
+                                       <DataTrigger Binding="{Binding IsStatusON}" Value="True">
+                                          <Setter Property="Foreground" Value="black"/>
+                                       </DataTrigger>
+                                    </Style.Triggers>
+                                 </Style>
+                              </TextBlock.Style>
+                           </TextBlock>
+                        </StackPanel>
+                     </UniformGrid>
+                     <Image Source="{Binding Img}" Width="120" Stretch="Uniform" Visibility="{Binding MyVisibilityImg}"/>
+                     <Viewbox Name="ViewBoxPark" Visibility="{Binding MyVisibilitySvg}">
+                        <ContentPresenter Content="{Binding LocalMyCanvas.CurrCanvas}"/>
+                     </Viewbox>
+                  </StackPanel>
+               </DataTemplate>
+            </ListBox.ItemTemplate>
+         </ListBox>
+
+         <Grid Grid.Column="1" Grid.Row="4" Visibility="Collapsed">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+               <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
+
+      </Grid>
+
+   </Border>
+</UserControl>

CadCuts/SelParkIndWD.xaml.vb

@@ -0,0 +1,918 @@
+Imports System.ComponentModel
+Imports System.Globalization
+Imports System.Xml
+Imports EgtUILib
+Imports OmagCUT.NestPageUC
+
+Public Class SelParkIndWD
+
+   Private Shared m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private m_nCtx As Integer = -1
+   Public Const nIndAllOff As Integer = 999
+
+   Public Shared sActualProj As String = String.Empty
+
+   Private m_ParkIndList As New List(Of ParkInd)
+   Public Property ParkIndList As List(Of ParkInd)
+      Get
+         Return m_ParkIndList
+      End Get
+      Set(value As List(Of ParkInd))
+         m_ParkIndList = value
+      End Set
+   End Property
+
+   Sub New(Owner As Window, Optional nCtx As Integer = -1)
+      'Me.Owner = Owner
+      InitializeComponent()
+      If nCtx > -1 Then m_nCtx = nCtx
+   End Sub
+
+   Public Sub Me_Laoded() Handles Me.Loaded
+      ' Aggiorno la lista
+      UpdateList()
+      ' Imposto la selezione del primo parcheggio disponibile
+      UpdateDefaultSelection()
+   End Sub
+
+   Public Sub UpdateList()
+      ' Carico lista dei pezzi
+      LoadParkInd(m_ParkIndList, m_nCtx)
+      ParkIndListBox.ItemsSource = m_ParkIndList
+      UpdateDefaultSelection()
+      ' Forzo l'aggiornamento della grafica
+      ParkIndListBox.Items.Refresh()
+   End Sub
+
+   Public Sub UpdateDefaultSelection()
+      ' Procedo a selezionare il primo (E FORSE ANCHE L'UNICO?) parcheggio attivo
+      Dim bFound As Boolean = False
+      For Each ItemPark As ParkInd In m_ParkIndList
+         If ItemPark.IsStatusON Then
+            ParkIndListBox.SelectedItem = ItemPark
+            bFound = True
+            Exit For
+         End If
+      Next
+      If Not bFound And m_ParkIndList.Count > 0 Then
+         m_ParkIndList(0).Status = GDB_ST.ON_
+         ParkIndListBox.SelectedItem = m_ParkIndList(0)
+      End If
+      '' Provedo a spegnere tutti gli altri parcheggi
+      'For Each ItemParkInd As ParkInd In m_ParkIndList
+      '   If ParkIndListBox.SelectedItem.Ind <> ItemParkInd.Ind Then
+      '      ItemParkInd.Status = GDB_ST.OFF
+      '      SetStatusPartInParkInd(ItemParkInd)
+      '   End If
+      'Next
+   End Sub
+
+   Private Sub ParkIndListBox_SelectionChanged() Handles ParkIndListBox.MouseLeftButtonUp
+      ' Non so se il click sta accendeno o spegnendo quinid faccio una verifica dello stato attuale del parcheggio
+      Dim localParkInd As ParkInd = ParkIndListBox.SelectedItem
+      ' Se l'elemento selezionato è attivo allora esco (perchè altrimenti lo spegnerei)
+      If localParkInd.IsStatusON Then Return
+      Dim bFound As Boolean = False
+      If localParkInd.Ind = nIndAllOff Then
+         localParkInd.Status = GDB_ST.ON_
+         bFound = True
+      End If
+      Dim nPartId As Integer = EgtGetFirstPart()
+      ' Cerco il primo pezzo del parcheggio indicato
+      While nPartId <> GDB_ID.NULL And Not bFound
+         Dim sInfoParkInd As String = String.Empty
+         ' Se i pezzi non hanno un indice di parcheggio di default vale "0"
+         If Not EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then sInfoParkInd = "0"
+         If localParkInd.Ind.ToString = sInfoParkInd Then
+            ' Determino lo stato da assegnare al parcheggio (prendo il primo pezzo del parcheggio come riferimento)
+            Dim OppositStat As Integer = If(localParkInd.Status = GDB_ST.ON_, GDB_ST.OFF, GDB_ST.ON_)
+            localParkInd.Status = OppositStat
+            bFound = True
+            ' termino la ricerca
+            Exit While
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      ' Assegno lo stato del parcheggio a tutti i pezzi i parcheggio
+      If bFound Then
+         SetStatusPartInParkInd(localParkInd, True, m_nCtx)
+      Else
+         ' Significa che i pezzi sono tutti in macchina: quindi i pezzi sono (SICURAMENTE?) accesi
+         Dim OppositStat As Integer = If(localParkInd.Status = GDB_ST.ON_, GDB_ST.OFF, GDB_ST.ON_)
+         localParkInd.Status = OppositStat
+         SetStatusPartInParkInd(localParkInd, True, m_nCtx)
+      End If
+      ' Se accendo un parcheggio procedo a spegnere tutto gli atri
+      If localParkInd.Status = GDB_ST.ON_ Then
+         For Each ItemParkInd As ParkInd In m_ParkIndList
+            If localParkInd.Ind <> ItemParkInd.Ind Then
+               ItemParkInd.Status = GDB_ST.OFF
+               SetStatusPartInParkInd(ItemParkInd, True, m_nCtx)
+            End If
+         Next
+      End If
+      EgtZoom(ZM.ALL)
+   End Sub
+
+#Region "METODI SHARED per gestione della lista parcheggi"
+
+   ' Restituisce il primo indice di parcheggio libero
+   Public Shared Function NewParkInd(Optional nCtx As Integer = -1) As Integer
+      ' recupero il contesto corrente
+      Dim CurrCtx As Integer = EgtGetCurrentContext()
+      ' recupero il contesto del progetto
+      Dim ProjCtx As Integer = m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx()
+      If nCtx > -1 Then ProjCtx = nCtx
+      EgtSetCurrentContext(ProjCtx)
+      Dim LastParkInd As Integer = 0
+      Dim nRawId As Integer = GetCurrentRaw()
+      ' Leggo l'indice di parcheggio dei pezzi in tavola
+      Dim nPartId As Integer = EgtGetFirstGroupInGroup(nRawId)
+      While nPartId <> GDB_ID.NULL
+         ' Se i pezzi non hanno un indice di parcheggio
+         Dim sInfoParkInd As String = String.Empty
+         If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+            If IsNumeric(sInfoParkInd) Then
+               Dim nInfoParkIndn As Integer = CInt(sInfoParkInd)
+               LastParkInd = Math.Max(LastParkInd, nInfoParkIndn)
+            End If
+         End If
+         nPartId = EgtGetNextGroup(nPartId)
+      End While
+      ' Leggo l'indice di parcheggio dei pezzi in parcheggio
+      nPartId = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         ' Se i pezzi non hanno un indice di parcheggio (COPIA della funzione sopra)
+         Dim sInfoParkInd As String = String.Empty
+         If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+            If IsNumeric(sInfoParkInd) Then
+               Dim nInfoParkIndn As Integer = CInt(sInfoParkInd)
+               LastParkInd = Math.Max(LastParkInd, nInfoParkIndn)
+            End If
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      ' Ripristino il contesto corrente
+      EgtSetCurrentContext(CurrCtx)
+      Return LastParkInd + 1
+   End Function
+
+   ' Gestisce lo stato dei pezzi associati al parcheggio indicato
+   Public Shared Sub SetStatusPartInParkInd(localParkInd As ParkInd, Optional bDraw As Boolean = True, Optional nCtx As Integer = -1)
+      If IsNothing(localParkInd) Then Return
+      ' recupero il contesto corrente
+      Dim CurrCtx As Integer = EgtGetCurrentContext()
+      ' recupero il contesto del progetto
+      Dim ProjCtx As Integer = m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx()
+      If nCtx > -1 Then ProjCtx = nCtx
+      EgtSetCurrentContext(ProjCtx)
+      Dim nRawId As Integer = GetCurrentRaw()
+      ' Pezzi in tavola
+      Dim nPartId As Integer = EgtGetFirstGroupInGroup(nRawId)
+      While nPartId <> GDB_ID.NULL
+         Dim sInfoParkInd As String = String.Empty
+         If Not EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then sInfoParkInd = "0"
+         If localParkInd.Ind.ToString = sInfoParkInd Then
+            ' Salvo lo stato del parcheggio (per gestire la navigazione) ANCHE SE I PEZZI SONO ACCESI
+            EgtSetInfo(nPartId, INFO_PARKSTATUS, localParkInd.Status)
+         End If
+         nPartId = EgtGetNextGroup(nPartId)
+      End While
+      ' Pezzi in parcheggio
+      nPartId = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim sInfoParkInd As String = String.Empty
+         If Not EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then sInfoParkInd = "0"
+         If localParkInd.Ind.ToString = sInfoParkInd Then
+            ' Setto lo stato
+            EgtSetStatus(nPartId, localParkInd.Status)
+            ' Salvo lo stato (per gestire la navigazione)
+            EgtSetInfo(nPartId, INFO_PARKSTATUS, localParkInd.Status)
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      If bDraw Then EgtDraw()
+      ' Ripristino il contesto corrente
+      EgtSetCurrentContext(CurrCtx)
+   End Sub
+
+   ' Restituuisce la lista dei parcheggi del progetto corrente
+   Public Shared Sub LoadParkInd(P_List As List(Of ParkInd), Optional nCtx As Integer = -1)
+      If IsNothing(P_List) Then Return
+      P_List.Clear()
+      P_List.Add(New ParkInd(nIndAllOff, "All off", 0))
+      ' recupero il contesto corrente
+      Dim CurrCtx As Integer = EgtGetCurrentContext()
+      ' recupero il contesto del progetto
+      Dim ProjCtx As Integer = m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx()
+      If nCtx > -1 Then ProjCtx = nCtx
+      EgtSetCurrentContext(ProjCtx)
+      Dim nRawId As Integer = GetCurrentRaw()
+      ' Pezzi in tavola
+      Dim nPartId As Integer = EgtGetFirstGroupInGroup(nRawId)
+      While nPartId <> GDB_ID.NULL
+         Dim sInfoParkInd As String = String.Empty
+         Dim nInfoParkInd As Integer = -1
+         ' Recupero l'indice del parcheggio
+         If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+            nInfoParkInd = If(IsNumeric(sInfoParkInd), CInt(sInfoParkInd), -1)
+         Else
+            nInfoParkInd = 0
+         End If
+         ' Se l'indice di parcheggio restituito è valido (Maggiore di -1)
+         If nInfoParkInd > -1 Then
+            ' Verifico se nella lista dei parcheggi è già presente l'indice indicato
+            Dim localParkInd As ParkInd = P_List.Find(Function(x) x.Ind = nInfoParkInd)
+            ' Se non trovo nessun parcheggio con questo indice allora lo aggiungo
+            If IsNothing(localParkInd) Then
+               Dim nStatus As Integer
+               If Not EgtGetInfo(nPartId, INFO_PARKSTATUS, nStatus) Then nStatus = GDB_ST.ON_
+               ' EgtGetStatus(nPartId, nStatus)
+               P_List.Add(New ParkInd(nInfoParkInd, "Park_" & nInfoParkInd.ToString, nStatus))
+            End If
+         End If
+         nPartId = EgtGetNextGroup(nPartId)
+      End While
+      ' Pezzi in parcheggio
+      nPartId = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim sInfoParkInd As String = String.Empty
+         Dim nInfoParkInd As Integer = -1
+         ' Recupero l'indice del parcheggio
+         If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+            nInfoParkInd = If(IsNumeric(sInfoParkInd), CInt(sInfoParkInd), -1)
+         Else
+            nInfoParkInd = 0
+         End If
+         ' Se l'indice di parcheggio restituito è valido (Maggiore di -1)
+         If nInfoParkInd > -1 Then
+            ' Verifico se nella lista dei parcheggi è già presente l'indice indicato
+            Dim localParkInd As ParkInd = P_List.Find(Function(x) x.Ind = nInfoParkInd)
+            ' Se non trovo nessun parcheggio con questo indice allora lo aggiungo
+            If IsNothing(localParkInd) Then
+               Dim nStatus As Integer
+               If Not EgtGetInfo(nPartId, INFO_PARKSTATUS, nStatus) Then nStatus = GDB_ST.ON_
+               ' EgtGetStatus(nPartId, nStatus)
+               P_List.Add(New ParkInd(nInfoParkInd, "Park_" & nInfoParkInd.ToString, nStatus))
+            End If
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtSetCurrentContext(CurrCtx)
+   End Sub
+
+   ' Aggiorna la lista dei parcheggi, se "bDraw=true" aggiorno la scena
+   Public Shared Sub UpdateViewOnParkInd(Optional bDraw As Boolean = True)
+      ' Ricarico la lista dei parcheggi
+      Dim ListParkInd As New List(Of ParkInd)
+      SelParkIndWD.LoadParkInd(ListParkInd)
+      ' Aggiorna la vista dei parcheggi
+      For Each Item As ParkInd In ListParkInd
+         SelParkIndWD.SetStatusPartInParkInd(Item, bDraw)
+      Next
+   End Sub
+
+   ' Restituisce il primo parcheggio attivo (
+   Public Shared Function GetCurrentParkIndSelected() As ParkInd
+      Dim ListParkInd As New List(Of ParkInd)
+      SelParkIndWD.LoadParkInd(ListParkInd)
+      ' Procedo a selezionare il primo (E ANCHE UNICO?..a volte no..) parcheggio attivo -> guarda funzione UpdateList <-
+      For Each ItemPark As ParkInd In ListParkInd
+         If ItemPark.IsStatusON Then
+            Return ItemPark
+         End If
+      Next
+      Return Nothing
+   End Function
+
+   ' Restitusice il nome del file immagine del parcheggio (manance solo dell'Indice di parcheggio e dell'esetensione png)
+   Public Shared Function GetPathCurrProj() As String
+      Dim nProj As Integer = m_MainWindow.m_CurrentProjectPageUC.GetCurrentProject()
+      Dim sParkPath As String = m_MainWindow.GetSaveDir() & "\" & Math.Abs(nProj).ToString("D4") & "_ParkInd_"
+      If Not String.IsNullOrEmpty(sActualProj) Then
+         Dim sDir As String = System.IO.Path.GetDirectoryName(sActualProj)
+         Dim sFile As String = System.IO.Path.GetFileNameWithoutExtension(sActualProj)
+         sParkPath = sDir & "\" & sFile & "_ParkInd_"
+      End If
+      Return sParkPath
+   End Function
+
+   Public Shared Sub CopyImgSvg(sNewFileName As String, Optional nCtx As Integer = -1)
+      If sNewFileName.EndsWith(".nge") Then
+         sNewFileName = sNewFileName.Remove(sNewFileName.Length - 4, 4) & "_ParkInd_"
+      End If
+      Dim Extension As String = ".svg"
+      If Not MainWindow.m_bShowSVGParkInd Then Extension = ".png"
+      Dim ListParkInd As New List(Of ParkInd)
+      ' ricarico la lista
+      SelParkIndWD.LoadParkInd(ListParkInd, nCtx)
+      'SelParkIndWD.sActualProj = Path.GetFileNameWithoutExtension(sPath)
+      For Each ItemParkInd As ParkInd In ListParkInd
+         If ItemParkInd.Ind <> 0 And ItemParkInd.Ind <> 999 And ItemParkInd.nPartInPark > 0 Then
+            Try
+               Dim sNewFile As String = sNewFileName & ItemParkInd.Ind.ToString & Extension
+               If MainWindow.m_bShowSVGParkInd Then
+                  WriteMyXML(sNewFile, ItemParkInd.LocalMyCanvas)
+               Else
+                  If System.IO.File.Exists(sNewFile) Then
+                     System.IO.File.Delete(sNewFile)
+                  End If
+                  System.IO.File.Copy(If(Extension = ".svg", ItemParkInd.Svg, ItemParkInd.Img), sNewFile)
+               End If
+            Catch ex As Exception
+               EgtOutLog("Copia immagine " & If(Extension = ".svg", ItemParkInd.Svg, ItemParkInd.Img) & " di ParkInd non riuscita")
+            End Try
+         End If
+      Next
+   End Sub
+
+#End Region    ' Metodi Shared
+
+End Class
+
+Public Class ParkInd
+   Implements INotifyPropertyChanged
+
+   Private m_VisbilityAllOff As Visibility = Visibility.Hidden
+
+   Private m_Ind As Integer
+   Public Property Ind As Integer
+      Get
+         Return m_Ind
+      End Get
+      Set(value As Integer)
+         m_Ind = value
+      End Set
+   End Property
+
+   Private m_Name As String
+   Public Property Name As String
+      Get
+         Return m_Name
+      End Get
+      Set(value As String)
+         m_Name = value
+      End Set
+   End Property
+
+   Private m_Img As String = String.Empty
+   Public Property Img As String
+      Get
+         Return m_Img
+      End Get
+      Set(value As String)
+         m_Img = value
+         NotifyPropertyChanged("MyVisibilityImg")
+      End Set
+   End Property
+
+   Private m_Svg As String = String.Empty
+   Public Property Svg As String
+      Get
+         Return m_Svg
+      End Get
+      Set(value As String)
+         m_Svg = value
+         NotifyPropertyChanged("MyVisibilitySvg")
+      End Set
+   End Property
+
+   Private m_nPartInTable As Integer = 0
+   Public Property nPartInTable As Integer
+      Get
+         Return m_nPartInTable
+      End Get
+      Set(value As Integer)
+         m_nPartInTable = value
+         NotifyPropertyChanged(NameOf(nPartInTable))
+      End Set
+   End Property
+
+   Private m_nPartInPark As Integer = GDB_ST.ON_
+   Public Property nPartInPark As Integer
+      Get
+         Return m_nPartInPark
+      End Get
+      Set(value As Integer)
+         m_nPartInPark = value
+         NotifyPropertyChanged(NameOf(nPartInPark))
+      End Set
+   End Property
+
+   Public ReadOnly Property CountInTab As String
+      Get
+         Return m_nPartInTable.ToString
+      End Get
+   End Property
+
+   Public ReadOnly Property ImgTab As String
+      Get
+         Return DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\table.png"
+      End Get
+   End Property
+
+   Public ReadOnly Property CountInPark As String
+      Get
+         Return m_nPartInPark.ToString
+      End Get
+   End Property
+
+   Public ReadOnly Property ImgPark As String
+      Get
+         Return DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park.png"
+      End Get
+   End Property
+
+   Private m_Status As Integer
+
+   Public Property Status As Integer
+      Get
+         Return m_Status
+      End Get
+      Set(value As Integer)
+         m_Status = value
+         NotifyPropertyChanged(NameOf(IsStatusON))
+      End Set
+   End Property
+
+   Public ReadOnly Property IsStatusON As Boolean
+      Get
+         Return (m_Status = GDB_ST.ON_)
+      End Get
+   End Property
+
+   Public ReadOnly Property MyVisibilityTmg As Visibility
+      Get
+         Return If(Not System.IO.File.Exists(m_Img), Visibility.Collapsed, Visibility.Visible)
+      End Get
+   End Property
+
+   Public ReadOnly Property MyVisibilitySvg As Visibility
+      Get
+         Return If(Not System.IO.File.Exists(m_Svg), Visibility.Collapsed, Visibility.Visible)
+      End Get
+   End Property
+
+   Public ReadOnly Property TitleVisibility As Visibility
+      Get
+         Return If(m_Ind = 999, m_VisbilityAllOff, Visibility.Visible)
+      End Get
+   End Property
+
+   Private m_LocalMyCanvas As MyCanvas
+   Public ReadOnly Property LocalMyCanvas As MyCanvas
+      Get
+         Return m_LocalMyCanvas
+      End Get
+   End Property
+
+   Sub New(Ind As Integer, Name As String, Stat As Integer)
+      m_Ind = Ind
+      m_Name = Name
+      m_Status = Stat
+      Dim MyMainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+      ' Costruisco il percorso immagine 
+      If m_Ind = 0 Then
+         m_Img = MyMainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park_On.png"
+         m_Svg = MyMainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park_On.svg"
+      ElseIf m_Ind = 999 Then
+         m_Img = MyMainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park_Off.png"
+         m_Svg = MyMainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\Park_Off.svg"
+      Else
+         m_Img = SelParkIndWD.GetPathCurrProj() & m_Ind.ToString & ".png"
+         m_Svg = SelParkIndWD.GetPathCurrProj() & m_Ind.ToString & ".svg"
+      End If
+
+      If MainWindow.m_bShowSVGParkInd Then
+         Dim CanvWidth As Integer = 145
+         Dim CanvHeight As Integer = CInt(CanvWidth / 1.4)
+         m_LocalMyCanvas = New MyCanvas(CanvWidth, CanvHeight)
+         If System.IO.File.Exists(m_Svg) Then
+            ReadMyXML(m_Svg, m_LocalMyCanvas)
+            m_Img = ""
+         End If
+      Else
+         m_Svg = ""
+      End If
+
+      ' Conto il numero di pezzi in Tavola
+      CountPartInTable()
+      ' Conto il numero di pezzi in parcheggio
+      CountPartInPark()
+
+   End Sub
+
+   ' Conta in numero di pezzi di questo parcheggio in Tavola
+   Private Sub CountPartInTable()
+      Dim nCount As Integer = 0
+      Dim nRawId As Integer = GetCurrentRaw()
+      ' Leggo l'indice di parcheggio dei pezzi in tavola
+      Dim nPartId As Integer = EgtGetFirstGroupInGroup(nRawId)
+      While nPartId <> GDB_ID.NULL
+         ' Aggiorno il valore del contatore
+         If IncreaseCounterPart(nPartId, nCount) Then
+            UpdateEntInCanvas(nPartId, 0.2)
+         End If
+         nPartId = EgtGetNextGroup(nPartId)
+      End While
+      m_nPartInTable = nCount
+   End Sub
+
+   ' Conta il numero di pezzi di questo parcheggio in Parcheggio
+   Private Sub CountPartInPark()
+      Dim nCount As Integer = 0
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         ' Aggiorno il valore del contatore 
+         If IncreaseCounterPart(nPartId, nCount) Then
+            UpdateEntInCanvas(nPartId, 1)
+         End If
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      m_nPartInPark = nCount
+   End Sub
+
+   Private Sub UpdateEntInCanvas(nPartId, dOpacity)
+      If Not IsNothing(m_LocalMyCanvas) Then
+         ' modifico il colore del pezzo nel SVG
+         Dim nIdRegion As Integer = EgtGetFirstNameInGroup(nPartId, "Region")
+         If nIdRegion <> GDB_ID.NULL Then
+            Dim nIdEnt As Integer = EgtGetFirstInGroup(nIdRegion)
+            While nIdEnt <> GDB_ID.NULL
+               If EgtGetType(nIdEnt) = GDB_TY.SRF_FRGN Then
+                  Exit While
+               End If
+            End While
+            If nIdEnt <> GDB_ID.NULL Then
+               Dim sName As String = ""
+               EgtGetName(nIdEnt, sName)
+               Dim Idpath As MyPath = m_LocalMyCanvas.ListPath.Find(Function(x) x.id = sName)
+               If Not IsNothing(Idpath) Then
+                  Idpath.fill_opacity = dOpacity
+                  m_LocalMyCanvas.UpdateMyPath(Idpath)
+                  Idpath.LoadPath()
+                  NotifyPropertyChanged(NameOf(LocalMyCanvas))
+               End If
+            End If
+         End If
+      End If
+   End Sub
+
+   ' Verifica se il pezzo passato (da parcheggio o tavola) appartiene al ParkInd corrente e quindi aggiorna il valore di nCount+=1
+   Private Function IncreaseCounterPart(nPartId As Integer, ByRef nCount As Integer) As Boolean
+      Dim bOk As Boolean = False
+      ' Se i pezzi non hanno un indice di parcheggio
+      Dim sInfoParkInd As String = String.Empty
+      Dim nInfoParkInd As Integer = -1
+      ' Recupero l'indice del parcheggio
+      If EgtGetInfo(nPartId, INFO_PARKIND, sInfoParkInd) Then
+         nInfoParkInd = If(IsNumeric(sInfoParkInd), CInt(sInfoParkInd), -1)
+      Else
+         nInfoParkInd = 0
+      End If
+      ' Se l'indice di parcheggio restituito è valido (Maggiore di -1)
+      If nInfoParkInd > -1 Then
+         ' e uguale a quallo del parcheggio correntemente selezionato
+         If nInfoParkInd = m_Ind Then
+            nCount = nCount + 1
+            bOk = True
+         End If
+      End If
+
+      Return bOk
+   End Function
+
+   Public Event PropertyChanged As PropertyChangedEventHandler Implements INotifyPropertyChanged.PropertyChanged
+
+   Public Sub NotifyPropertyChanged(propName As String)
+      RaiseEvent PropertyChanged(Me, New PropertyChangedEventArgs(propName))
+   End Sub
+
+End Class
+
+#Region "ELEMENTI PER LA GESTIONE SVG"
+
+Public Class MyCanvas
+
+   Private m_CurrCanvas As New Canvas
+   Public Property CurrCanvas As Canvas
+      Get
+         Return m_CurrCanvas
+      End Get
+      Set(value As Canvas)
+         m_CurrCanvas = value
+      End Set
+   End Property
+
+   Private m_ListPath As New List(Of MyPath)
+   Public Property ListPath As List(Of MyPath)
+      Get
+         Return m_ListPath
+      End Get
+      Set(value As List(Of MyPath))
+         m_ListPath = value
+      End Set
+   End Property
+
+   Private m_ViewBoxDim As String
+   Public Property ViewBoxDim As String
+      Get
+         Return m_ViewBoxDim
+      End Get
+      Set(value As String)
+         m_ViewBoxDim = value
+      End Set
+   End Property
+
+   Sub New(Width As Integer, Height As Integer)
+      m_CurrCanvas.Width = Width
+      m_CurrCanvas.Height = Height
+      m_CurrCanvas.ClipToBounds = True
+   End Sub
+
+   Public Sub LoadCanvas()
+      For Each ItemPath As MyPath In m_ListPath
+         m_CurrCanvas.Children.Add(ItemPath.CurrPath)
+      Next
+   End Sub
+
+   Public Sub UpdateMyPath(CurrPath As MyPath)
+      m_CurrCanvas.Children.Remove(CurrPath.CurrPath)
+      m_CurrCanvas.Children.Add(CurrPath.CurrPath)
+   End Sub
+
+End Class
+
+Public Class MyPath
+
+   Private m_CurrPath As New System.Windows.Shapes.Path
+   Public Property CurrPath As System.Windows.Shapes.Path
+      Get
+         Return m_CurrPath
+      End Get
+      Set(value As System.Windows.Shapes.Path)
+         m_CurrPath = value
+      End Set
+   End Property
+
+   Private m_CanvX As Double
+   Public ReadOnly Property CanvX As Double
+      Get
+         Return m_CanvX
+      End Get
+   End Property
+
+   Private m_CanvY As Double
+   Public ReadOnly Property CanvY As Double
+      Get
+         Return m_CanvY
+      End Get
+   End Property
+
+   Private m_DimX As Double
+   Public ReadOnly Property DimX As Double
+      Get
+         Return m_DimX
+      End Get
+   End Property
+
+   Private m_DimY As Double
+   Public ReadOnly Property DimY As Double
+      Get
+         Return m_DimY
+      End Get
+   End Property
+
+   Private m_id As String
+   Public ReadOnly Property id As String
+      Get
+         Return m_id
+      End Get
+   End Property
+
+   Private m_d As String
+   Public ReadOnly Property d As String
+      Get
+         Return m_d
+      End Get
+   End Property
+
+   Private m_fill As String
+   Public Property fill As String
+      Get
+         Return m_fill
+      End Get
+      Set(value As String)
+         m_fill = value
+      End Set
+   End Property
+
+   Private m_fill_opacity As Double
+   Public Property fill_opacity As Double
+      Get
+         Return m_fill_opacity
+      End Get
+      Set(value As Double)
+         m_fill_opacity = value
+      End Set
+   End Property
+
+   Private m_stroke As String
+   Public Property stroke As String
+      Get
+         Return m_stroke
+      End Get
+      Set(value As String)
+         m_stroke = value
+      End Set
+   End Property
+
+   Private m_stroke_opacity As Double
+   Public Property stroke_opacity As Double
+      Get
+         Return m_stroke_opacity
+      End Get
+      Set(value As Double)
+         m_stroke_opacity = value
+      End Set
+   End Property
+
+   Private m_stroke_width As Double
+   Public Property stroke_width As Double
+      Get
+         Return m_stroke_width
+      End Get
+      Set(value As Double)
+         m_stroke_width = value
+      End Set
+   End Property
+
+   Sub New(Id As String, D As String, CanvX As Double, CanvY As Double, DimX As Double, DimY As Double, Fill As String, FillOpacity As Double, Stroke As String, StrokeOpacity As Double)
+      m_id = Id
+      m_d = D
+      m_CanvX = CanvX
+      m_CanvY = CanvY
+      m_DimX = DimX
+      m_DimY = DimY
+      m_fill = Fill
+      m_fill_opacity = FillOpacity
+      m_stroke = Stroke
+      m_stroke_opacity = StrokeOpacity
+      LoadPath()
+   End Sub
+
+   Public Sub LoadPath()
+      ' Carico la geometria
+      m_CurrPath.Data = Geometry.Parse(d)
+      ' Carico il colore di sfondo
+      SetBrushFromRGBString(m_fill, m_CurrPath.Fill)
+      ' Applico l'opacità della superificie
+      m_CurrPath.Opacity = m_fill_opacity
+      ' Calcolo e applico la traslazione e la scalatura
+      Dim myTransformGroup As New TransformGroup()
+      Dim ScaleX As Double = m_CanvX / DimX
+      Dim ScaleY As Double = m_CanvY / DimY
+      Dim OffX As Double = (m_CanvX - Math.Min(ScaleX, ScaleY) * DimX) / 2
+      Dim OffY As Double = (m_CanvY - Math.Min(ScaleX, ScaleY) * DimY) / 2
+      myTransformGroup.Children.Add(New ScaleTransform(Math.Min(ScaleX, ScaleY), Math.Min(ScaleX, ScaleY)))
+      myTransformGroup.Children.Add(New TranslateTransform(OffX, OffY))
+      m_CurrPath.RenderTransform = myTransformGroup
+   End Sub
+
+   Private Sub SetBrushFromRGBString(sFill As String, ByRef brFill As Brush)
+      If String.IsNullOrEmpty(sFill) Then
+         brFill = Brushes.DarkRed
+         Return
+      End If
+      Dim s1 As String = sFill
+      If s1.Contains("rgb") Then
+         s1 = s1.Replace("rgb(", "")
+         s1 = s1.Replace(")", "")
+         Dim s2 As String = ""
+         For Each s As String In s1.Split(",")
+            s2 &= CInt(s).ToString("x2")
+         Next
+         brFill = New BrushConverter().ConvertFrom("#" & s2)
+      End If
+   End Sub
+
+End Class
+
+Public Module XMLReader
+
+   Public Sub ReadMyXML(FilePath As String, Canv As MyCanvas)
+      'Create the XML Reader
+      Dim m_xmlr As XmlTextReader = New XmlTextReader(FilePath)
+      'Disable whitespace so that you don't have to read over whitespaces
+      m_xmlr.WhitespaceHandling = WhitespaceHandling.None
+      ' Leggo la prima riga: '?xml' tag
+      m_xmlr.Read()
+      ' Passo a leggere la successiva: 'svg' tag
+      m_xmlr.Read()
+      ' Leggo gli attributi di questo tag (dimensioni)
+      Dim ViewBoxDim = m_xmlr.GetAttribute("viewBox")
+      Canv.ViewBoxDim = ViewBoxDim
+      ' Elaboro i dati per avere la scalatura del disegno
+      Dim DimViewBox As String() = ViewBoxDim.ToString.Split(" ")
+      Dim DimX As Integer = Math.Abs(CInt(DimViewBox(2))) + Math.Abs(CInt(DimViewBox(0)))
+      Dim DimY As Integer = Math.Abs(CInt(DimViewBox(3))) + Math.Abs(CInt(DimViewBox(1)))
+
+      ' Leggo in loop i tag: 'path'
+      While Not m_xmlr.EOF
+         m_xmlr.Read()
+         If Not m_xmlr.IsStartElement() Then
+            Continue While
+         End If
+         ' recupero il valore dell'attributo 'id'
+         Dim idAttribute = m_xmlr.GetAttribute("id")
+         ' recupero il valore dell'attributo 'd'
+         Dim dAttribute = m_xmlr.GetAttribute("d")
+         ' recupero il valore dell'attributo 'fill'
+         Dim fillAttribute = m_xmlr.GetAttribute("fill")
+         ' recupero il valore dell'attributo 'fill-opacity'
+         Dim fillOpacityAttribute = m_xmlr.GetAttribute("fill-opacity")
+         ' recupero il valore dell'attributo 'stroke'
+         Dim strokeAttribute = m_xmlr.GetAttribute("stroke")
+         ' recupero il valore dell'attributo 'stroke-opacity'
+         Dim strokeOpacityAttribute = m_xmlr.GetAttribute("stroke-opacity")
+         ' recupero il valore dell'attributo 'stroke - Width'
+         Dim strokeWidthAttribute = m_xmlr.GetAttribute("stroke-width")
+         ' carico l'elemento in lista solo se esiste un'immagine
+         If Not String.IsNullOrEmpty(idAttribute) And Not String.IsNullOrEmpty(dAttribute) Then
+            Dim fillOpacity As Double = 1 ' CDbl(fillOpacityAttribute)
+            StringToDouble(fillOpacityAttribute, fillOpacity)
+            Dim strokeOpacity As Double = 1 ' CDbl(strokeOpacityAttribute)
+            StringToDouble(strokeOpacityAttribute, strokeOpacity)
+            Canv.ListPath.Add(New MyPath(idAttribute, dAttribute, Canv.CurrCanvas.Width, Canv.CurrCanvas.Height, DimX, DimY, fillAttribute, fillOpacity, strokeAttribute, strokeOpacity))
+         End If
+
+      End While
+      ' Libero il file dalla lettura
+      m_xmlr.Close()
+      ' popolo la canvas con le Path che ho caricato
+      Canv.LoadCanvas()
+   End Sub
+
+   Public Sub WriteMyXML(FilePath As String, Canv As MyCanvas)
+
+      Dim _namespaceDefault As String = "http://www.w3.org/2000/svg"
+
+      Dim doc As New Xml.XmlDocument
+
+      Dim elm As System.Xml.XmlNode
+      Dim elmSub As System.Xml.XmlNode
+      Dim elmMain As Xml.XmlNode
+
+      doc = New Xml.XmlDocument
+
+      elmMain = doc.CreateElement("svg")
+      elmSub = elmMain.Attributes.Append(doc.CreateAttribute("viewBox"))
+      elmSub.Value = Canv.ViewBoxDim
+      elmSub = elmMain.Attributes.Append(doc.CreateAttribute("xmlns"))
+      elmSub.Value = _namespaceDefault
+
+      For Each itemPath As MyPath In Canv.ListPath
+         elm = elmMain.AppendChild(doc.CreateElement("path"))
+
+         elmSub = elm.Attributes.Append(doc.CreateAttribute("id"))
+         elmSub.Value = itemPath.id
+
+         elmSub = elm.Attributes.Append(doc.CreateAttribute("d"))
+         elmSub.Value = itemPath.d
+
+         If Not String.IsNullOrEmpty(itemPath.fill) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("fill"))
+            elmSub.Value = itemPath.fill
+         End If
+
+         If Not String.IsNullOrEmpty(itemPath.fill_opacity) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("fill-opacity"))
+            elmSub.Value = itemPath.fill_opacity.ToString(CultureInfo.InvariantCulture)
+         End If
+
+         If Not String.IsNullOrEmpty(itemPath.stroke) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("stroke"))
+            elmSub.Value = itemPath.stroke
+         End If
+
+         If Not String.IsNullOrEmpty(itemPath.stroke_opacity) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("stroke-opacity"))
+            elmSub.Value = itemPath.stroke_opacity.ToString(CultureInfo.InvariantCulture)
+         End If
+
+         If Not String.IsNullOrEmpty(itemPath.stroke_width) Then
+            elmSub = elm.Attributes.Append(doc.CreateAttribute("stroke-width"))
+            elmSub.Value = itemPath.stroke_width.ToString(CultureInfo.InvariantCulture)
+         End If
+
+      Next
+
+      doc.AppendChild(doc.CreateXmlDeclaration("1.0", "UTF-8", ""))
+      doc.AppendChild(elmMain)
+      doc.Save(FilePath)
+
+   End Sub
+
+End Module
+
+#End Region    ' Elementi per la gestione SVG

CadCuts/SelectPartFromFamilyWD.xaml

@@ -0,0 +1,73 @@
+<Window x:Class="SelectPartFromFamilyWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+        Title="SaveNameWD" Height="200" Width="400" ShowInTaskbar="False">
+
+   <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+   <Border Style="{DynamicResource OmagCut_Border}">
+      <Grid x:Name="SaveNameGrid">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.5*"/>
+            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="0.5*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.1*"/>
+            <RowDefinition Height="0.3*"/>
+            <RowDefinition Height="0.2*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.2*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.2*"/>
+
+         </Grid.RowDefinitions>
+
+         <!--Messaggio: Seleziona il numero di pezzi-->
+         <TextBlock Name="TitleWDTxbl" Grid.Column="1" Grid.Row="1"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+
+         <UniformGrid Grid.Column="1" Grid.Row="3" VerticalAlignment="Center" Columns="2">
+            <TextBlock Name="NbrOfPartsMsg"
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="NbrOfParts"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+         </UniformGrid>
+
+         <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="5" Grid.RowSpan="1">
+            <Grid.ColumnDefinitions>
+
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+
+            </Grid.ColumnDefinitions>
+
+            <!--ultimo progetto-->
+            <Button Name="ConfirmSelection" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Confirm">
+               <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <!--nuovo progetto-->
+            <Button Name="SelectAllPart" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                    ToolTip="Select all" Visibility="Collapsed">
+               <Image Source="{DynamicResource NuovoImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <!--apri folder progetti-->
+            <Button Name="CancelSelection" Grid.Column="5" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                    ToolTip="Cancel">
+               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+         </Grid>
+
+      </Grid>
+
+   </Border>
+</Window>

CadCuts/SelectPartFromFamilyWD.xaml.vb

@@ -0,0 +1,66 @@
+Public Class SelectPartFromFamilyWD
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_NumberOfParts As Integer = 1
+   Public Property NumberOfParts As Integer
+      Get
+         Return m_NumberOfParts
+      End Get
+      Set(value As Integer)
+         m_NumberOfParts = value
+      End Set
+   End Property
+
+   Private m_NumberOfSelection As Integer = 1
+   Public Property NumberOfSelection As Integer
+      Get
+         Return m_NumberOfSelection
+      End Get
+      Set(value As Integer)
+         m_NumberOfSelection = value
+      End Set
+   End Property
+   Public Sub New(Owner As Window, NbrParts As Integer)
+      Me.Owner = Owner
+      m_NumberOfParts = NbrParts
+      InitializeComponent()
+      Me.ShowDialog()
+   End Sub
+
+   ' inizializzo la finestra
+   Private Sub SelectPartFromFamilyWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' posiziono la fistra in centro alla pagina
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+
+      TitleWDTxbl.Text = EgtUILib.EgtMsg(91232)      ' Selection parts
+      NbrOfPartsMsg.Text = EgtUILib.EgtMsg(91233)    ' Number of parts
+      NbrOfParts.Text = m_NumberOfParts.ToString
+   End Sub
+
+   ' seleziono il numero di elementi indicati
+   Private Sub ConfirmSelection_Click(sender As Object, e As RoutedEventArgs) Handles ConfirmSelection.Click
+      Dim nVal As Integer = 0
+      StringToInt(NbrOfParts.Text, nVal)
+      If nVal >= 0 Then
+         m_NumberOfSelection = nVal
+      Else
+         ' indice non valido per la selezione
+         m_NumberOfSelection = 0
+      End If
+      Me.Close()
+   End Sub
+
+   '' seleziona tutti
+   'Private Sub SelectAllPart_Click(sender As Object, e As RoutedEventArgs) Handles SelectAllPart.Click
+   '   m_NumberOfSelection = m_NumberOfParts
+   '   Me.Close()
+   'End Sub
+
+   ' Deseleziomo tutto
+   Private Sub CancelSelection_Click(sender As Object, e As RoutedEventArgs) Handles CancelSelection.Click
+      m_NumberOfSelection = 0
+      Me.Close()
+   End Sub
+
+End Class

CadCuts/SelectTableWD.xaml

@@ -0,0 +1,82 @@
+<Window x:Class="SelectTableWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="ChooseTool" Height="282.6" Width="326.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True" 
+        Background="Transparent">
+
+   <Border Style="{DynamicResource OmagCut_Border}">
+
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.5*"/>
+            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="0.5*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1.5*"/>
+            <RowDefinition Height="0.1*"/>
+            <RowDefinition Height="1.0*"/>
+            <RowDefinition Height="0.5*"/>
+         </Grid.RowDefinitions>
+
+         <TextBlock Name="TableListMsg" Grid.Row="1" Grid.Column="1" 
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+
+         <ItemsControl Name="TableList"
+                       Grid.Row="2" Grid.Column="1">
+            <ItemsControl.ItemsPanel>
+               <ItemsPanelTemplate>
+                  <StackPanel Orientation="Horizontal" 
+                              HorizontalAlignment="Center"/>
+               </ItemsPanelTemplate>
+            </ItemsControl.ItemsPanel>
+            <ItemsControl.ItemTemplate>
+               <DataTemplate>
+                  <RadioButton GroupName="TabGrp" 
+                               IsChecked="{Binding IsActive}"
+                               Width="60" Height="60">
+
+                     <RadioButton.Style>
+                        <Style TargetType="ToggleButton" BasedOn="{StaticResource OmagCut_ToggleButton}">
+                           <Style.Triggers>
+                              <Trigger Property="IsChecked" Value="True">
+                                 <Setter Property="Foreground" Value="white"/>
+                                 <Setter Property="Background" Value="{StaticResource OmagCut_Blue}"/>
+                              </Trigger>
+                           </Style.Triggers>
+                        </Style>
+                     </RadioButton.Style>
+                     <Grid>
+                        <TextBlock Text="{Binding sName}" Background="Transparent"/>
+                        <Image Source="{Binding ImgTab}" Margin="0,10,0,0"
+                               Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                     </Grid>
+
+                  </RadioButton>
+               </DataTemplate>
+            </ItemsControl.ItemTemplate>
+         </ItemsControl>
+
+         <Grid Grid.Column="1" Grid.Row="4">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" >
+               <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" IsCancel="True">
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
+      </Grid>
+   </Border>
+</Window>

CadCuts/SelectTableWD.xaml.vb

@@ -0,0 +1,96 @@
+Imports System.ComponentModel
+
+Public Class SelectTableWD
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_nSelectedTable As Integer = 0
+   Public ReadOnly Property nSelectedTable As Integer
+      Get
+         Return m_nSelectedTable
+      End Get
+   End Property
+
+   Sub New(Owner As Window)
+      Me.Owner = Owner
+      Me.WindowStartupLocation = WindowStartupLocation.CenterOwner
+      InitializeComponent()
+   End Sub
+
+   Public CurrTableList As New List(Of TableToChange)
+
+   Private Sub ChangeTable_Initialized() Handles Me.Initialized
+
+      TableListMsg.Text = EgtUILib.EgtMsg(91234)      ' Seleziona la tavola da usare
+      ' recuepero l'inidce della tavola corrente
+      Dim nIndeXCurrTab As Integer = GetCurrentTable()
+      ' creo la lista delle tavole disponibili (attivo il bottone della tavola attualmente in uso)
+      For nInd As Integer = 0 To GetTableCount() - 1
+         CurrTableList.Add(New TableToChange("Tab", (nInd + 1).ToString, ((nInd + 1) = nIndeXCurrTab)))
+      Next
+   End Sub
+
+   Private Sub ChangeTable_Loaded() Handles Me.Loaded
+      TableList.ItemsSource = CurrTableList
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      ' recupero l'indice della tavola impostata
+      For Each ItemTab As TableToChange In CurrTableList
+         If ItemTab.IsActive Then
+            m_nSelectedTable = ItemTab.nIndex
+            Exit For
+         End If
+      Next
+      DialogResult = True
+   End Sub
+
+End Class
+
+Public Class TableToChange
+   Implements INotifyPropertyChanged
+
+   Private Property m_sName As String = "Tab"
+   Public ReadOnly Property sName As String
+      Get
+         Return m_sName
+      End Get
+   End Property
+
+   Public ReadOnly Property ImgTab As String
+      Get
+         Return DirectCast(Application.Current.MainWindow, MainWindow).GetResourcesDir() & "\MachineButtonsImage\table.png"
+      End Get
+   End Property
+
+   Private Property m_nIndex As Integer = 3
+   Public ReadOnly Property nIndex As Integer
+      Get
+         Return m_nIndex
+      End Get
+   End Property
+
+   Private m_bIsActive As Boolean = False
+   Public Property IsActive As Boolean
+      Get
+         Return m_bIsActive
+      End Get
+      Set(value As Boolean)
+         m_bIsActive = value
+         NotifyPropertyChanged("IsActive")
+      End Set
+   End Property
+
+   Public Sub New(Name As String, Ind As Integer, IsCurrent As Boolean)
+      m_sName = Name & " " & Ind.ToString
+      m_nIndex = Ind
+      m_bIsActive = IsCurrent
+      NotifyPropertyChanged("IsActive")
+   End Sub
+
+   Public Event PropertyChanged(sender As Object, e As PropertyChangedEventArgs) Implements INotifyPropertyChanged.PropertyChanged
+
+   Public Sub NotifyPropertyChanged(propName As String)
+      RaiseEvent PropertyChanged(Me, New PropertyChangedEventArgs(propName))
+   End Sub
+
+End Class

CadCuts/SplitAuto.vb

@@ -5,6 +5,11 @@ Public Module SplitAuto
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
 
    Private m_dLastDT As Double = 0
+   Public ReadOnly Property dLastDT As Double
+      Get
+         Return m_dLastDT
+      End Get
+   End Property
 
    '-----------------------------------------------------------------------------------------------
    Friend Class SplitMach
@@ -31,6 +36,10 @@ Public Module SplitAuto
       Public m_dStartFreeLen As Double
       Public m_dEndFreeLen As Double
       Public m_vtDir As Vector3d
+      ' ver 2.6f4: tagli corti gestiti con LeadIn.OUT/LeadOut.OUT
+      Public m_bMngLeadInOnIntCorner As Boolean
+      ' ver 2.7e1: tagli finali 
+      Public m_bFinalCut As Boolean
    End Class
 
    '-----------------------------------------------------------------------------------------------
@@ -42,143 +51,210 @@ Public Module SplitAuto
       While nOperId <> GDB_ID.NULL
          ' verifico sia una lavorazione valida della fase corrente
          If IsValidMachining(nOperId) And EgtGetOperationPhase(nOperId) = nCurrPhase Then
-            ' se appartiene ad un grezzo attivo la inserisco in lista
-            If IsMachiningInActiveRaw(nOperId) Then
-               Dim Mach As New SplitMach
-               Mach.m_nEntId = GDB_ID.NULL
-               ' identificativo
-               Mach.m_nId = nOperId
-               ' eventuali lavorazioni inglobate
-               Dim sInfo As String = String.Empty
-               If EgtGetInfo(nOperId, INFO_MCH_OTHMID, sInfo) Then
-                  Dim sItems() As String = sInfo.Split(",".ToCharArray)
-                  For Each sId As String In sItems
-                     Dim nId As Integer = 0
-                     StringToInt(sId, nId)
-                     If nId > 0 Then Mach.m_vOthId.Add(nId)
-                  Next
-               End If
-               ' tipo
-               Mach.m_nType = EgtGetOperationType(nOperId)
-               ' layer di origine
-               EgtGetInfo(nOperId, INFO_MCH_LAYER, Mach.m_sLay)
-               ' se taglio con lama
-               If Mach.m_nType = MCH_OY.SAWING Then
-                  ' verifica interferenza
-                  If Mach.m_sLay = NAME_OUTLOOP Then
-                     EgtVerifyMachining(nOperId, Mach.m_nInterf)
-                     For Each nId As Integer In Mach.m_vOthId
-                        Dim nRes As Integer = FMI_TYPE.LI Or FMI_TYPE.RM Or FMI_TYPE.LO
-                        EgtVerifyMachining(nId, nRes)
-                        Mach.m_nInterf = Mach.m_nInterf Or nRes
-                     Next
-                  Else
-                     Mach.m_nInterf = FMI_TYPE.NONE
-                  End If
-                  ' la imposto come lavorazione corrente
-                  EgtSetCurrMachining(nOperId)
-                  ' inversione
-                  EgtGetMachiningParam(MCH_MP.INVERT, Mach.m_bInvert)
-                  ' recupero l'angolo di fianco
-                  EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
-                  ' recupero allungamento iniziale e finale (negativi vicino ad angoli interni)
-                  Dim dStartAddLen As Double = -10
-                  EgtGetMachiningParam(MCH_MP.STARTADDLEN, dStartAddLen)
-                  Dim dEndAddLen As Double = -10
-                  EgtGetMachiningParam(MCH_MP.ENDADDLEN, dEndAddLen)
-                  ' recupero tipo entità, angolo con entità precedente e successiva, lunghezze libere iniziale e finale
-                  Mach.m_bIsLine = True
-                  Mach.m_dPrevAng = 0
-                  Mach.m_dNextAng = 0
-                  Mach.m_dStartFreeLen = FREELEN_INF + 1
-                  Mach.m_dEndFreeLen = FREELEN_INF + 1
-                  Dim nEntId, nSub As Integer
-                  If EgtGetMachiningGeometry( 0, nEntId, nSub) Then
-                     If EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse EgtGetType( nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
-                     Mach.m_bEnableInvert = GetEnableInvert( nEntId)
-                     EgtMidVector( nEntId, GDB_ID.ROOT, Mach.m_vtDir)
-                     If Mach.m_bInvert Then Mach.m_vtDir = -Mach.m_vtDir
-                     Mach.m_nEntId = nEntId
-                  End If
-                  ' verifico se trasformabile in un taglio di separazione (almeno da un lato)
-                  If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL) And
-                     Mach.m_sLay = NAME_OUTLOOP And Mach.m_nInterf = FMI_TYPE.NONE Then
-                     Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
-                     Mach.m_bCanStartAll = (dStartAddLen > -EPS_SMALL And (nRes And CAR_RES.LI_OK) <> 0) And
-                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine
-                     Mach.m_bCanEndAll = (dEndAddLen > -EPS_SMALL And (nRes And CAR_RES.LO_OK) <> 0) And
-                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine
-                  End If
-                  ' se trasformabile in taglio di separazione, verifico se lo è
-                  If Mach.m_bCanStartAll Or Mach.m_bCanEndAll Then
-                     EgtSetCurrMachining(nOperId)
-                     Dim nLiType As Integer
-                     EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiType)
-                     Dim nLoType As Integer
-                     EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoType)
-                     Mach.m_bStartAll = (nLiType = MCH_SAW_LI.EXT_CENT Or nLiType = MCH_SAW_LI.EXT_OUT)
-                     Mach.m_bEndAll = (nLoType = MCH_SAW_LO.EXT_CENT Or nLoType = MCH_SAW_LO.EXT_OUT)
-                  Else
-                     Mach.m_bStartAll = False
-                     Mach.m_bEndAll = False
-                  End If
-               ' Waterjet
-               ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then
-                  Mach.m_nInterf = FMI_TYPE.NONE
-                  ' recupero l'angolo di fianco
-                  EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
-                  Mach.m_bCanStartAll = False
-                  Mach.m_bCanEndAll = False
-                  Mach.m_bStartAll = False
-                  Mach.m_bEndAll = False
-               ' Forature e fresature
-               Else
-                  Mach.m_nInterf = FMI_TYPE.NONE
-                  Mach.m_dSideAng = 0
-                  Mach.m_bCanStartAll = False
-                  Mach.m_bCanEndAll = False
-                  Mach.m_bStartAll = False
-                  Mach.m_bEndAll = False
-               End If
-               ' abilitazione
-               Mach.m_bEnabled = Not EgtExistsInfo(nOperId, INFO_MCH_USER_OFF)
-               ' pausa
-               Mach.m_bPause = GetPause(nOperId)
-               ' inserisco in lista
-               MachSplitList.Add(Mach)
-            ' altrimenti la disattivo
-            Else
-               EgtSetOperationMode(nOperId, False)
-            End If
+            Dim Mach As New SplitMach
+            If CreateMach(nOperId, Mach) Then MachSplitList.Add(Mach)
          End If
          nOperId = EgtGetNextOperation(nOperId)
       End While
       Return True
    End Function
 
+   Friend Function CreateMach(nOperId As Integer, ByRef Mach As SplitMach) As Boolean
+      Dim bOk As Boolean = True
+      ' se appartiene ad un grezzo attivo la inserisco in lista
+      If IsMachiningInActiveRaw(nOperId) Then
+         Mach.m_nEntId = GDB_ID.NULL
+         ' identificativo
+         Mach.m_nId = nOperId
+         ' eventuali lavorazioni inglobate
+         Dim sInfo As String = String.Empty
+         If EgtGetInfo(nOperId, INFO_MCH_OTHMID, sInfo) Then
+            Dim sItems() As String = sInfo.Split(",".ToCharArray)
+            For Each sId As String In sItems
+               Dim nId As Integer = 0
+               StringToInt(sId, nId)
+               If nId > 0 Then Mach.m_vOthId.Add(nId)
+            Next
+         End If
+         ' tipo
+         Mach.m_nType = EgtGetOperationType(nOperId)
+         ' layer di origine
+         EgtGetInfo(nOperId, INFO_MCH_LAYER, Mach.m_sLay)
+         ' se taglio con lama
+         If Mach.m_nType = MCH_OY.SAWING Then
+            ' verifica interferenza
+            If Mach.m_sLay = NAME_OUTLOOP Then
+               EgtVerifyMachining(nOperId, Mach.m_nInterf)
+               For Each nId As Integer In Mach.m_vOthId
+                  Dim nRes As Integer = FMI_TYPE.LI Or FMI_TYPE.RM Or FMI_TYPE.LO
+                  EgtVerifyMachining(nId, nRes)
+                  Mach.m_nInterf = Mach.m_nInterf Or nRes
+               Next
+            Else
+               Mach.m_nInterf = FMI_TYPE.NONE
+            End If
+            ' la imposto come lavorazione corrente
+            EgtSetCurrMachining(nOperId)
+            ' inversione
+            EgtGetMachiningParam(MCH_MP.INVERT, Mach.m_bInvert)
+            ' recupero l'angolo di fianco
+            EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
+            ' recupero allungamento iniziale e finale (negativi vicino ad angoli interni)
+            Dim dStartAddLen As Double = -10
+            EgtGetMachiningParam(MCH_MP.STARTADDLEN, dStartAddLen)
+            Dim dEndAddLen As Double = -10
+            EgtGetMachiningParam(MCH_MP.ENDADDLEN, dEndAddLen)
+            ' recupero tipo entità, angolo con entità precedente e successiva, lunghezze libere iniziale e finale
+            Mach.m_bIsLine = True
+            Mach.m_dPrevAng = 0
+            Mach.m_dNextAng = 0
+            Mach.m_dStartFreeLen = FREELEN_INF + 1
+            Mach.m_dEndFreeLen = FREELEN_INF + 1
+            Dim nEntId, nSub As Integer
+            If EgtGetMachiningGeometry(0, nEntId, nSub) Then
+               ' EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse
+               If EgtGetType(nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
+               EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
+               EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
+               EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
+               EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
+               Mach.m_bEnableInvert = GetEnableInvert(nEntId)
+               EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
+               If Mach.m_bInvert Then Mach.m_vtDir = -Mach.m_vtDir
+               Mach.m_nEntId = nEntId
+               EgtGetInfo(nOperId, "ManageLeadInOnIntCorner", Mach.m_bMngLeadInOnIntCorner)
+            End If
+            Mach.m_bFinalCut = False
+            EgtGetInfo(nOperId, "FinalCut", Mach.m_bFinalCut)
+            ' verifico se trasformabile in un taglio di separazione (almeno da un lato)
+            If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+                     Mach.m_sLay = NAME_OUTLOOP And (Mach.m_nInterf And FMI_TYPE.RM) = 0 Then
+               Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
+               Dim bIn As Boolean = False
+               Dim bOut As Boolean = False
+               CanExtendSides(Mach, bIn, bOut)
+               Mach.m_bCanStartAll = ((dStartAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LI_OK) <> 0) And
+                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine And bIn
+               Mach.m_bCanEndAll = ((dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LO_OK) <> 0) And
+                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine And bOut
+               If nRes = 0 Then
+                  EgtOutLog("Operation ID " & nOperId.ToString & " isn't split cut! verify depth machining.")
+               End If
+
+            ElseIf (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+                     Mach.m_sLay = NAME_OUTLOOP And
+                     (Mach.m_nInterf = FMI_TYPE.LI Or Mach.m_nInterf = FMI_TYPE.LO Or Mach.m_nInterf = FMI_TYPE.RM) Then
+               Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
+               Dim bIn As Boolean = False
+               Dim bOut As Boolean = False
+               CanExtendSides(Mach, bIn, bOut)
+               ' And (nRes And CAR_RES.LI_OK) <> 0 : da aggiungere
+               Mach.m_bCanStartAll = (dStartAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine And bIn And
+                                           Mach.m_nInterf <> FMI_TYPE.LI
+               ' And (nRes And CAR_RES.LO_OK) <> 0 : da aggiungere come sopra
+               Mach.m_bCanEndAll = (dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
+                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine And bOut And
+                                         Mach.m_nInterf <> FMI_TYPE.LO
+               If nRes = 0 Then
+                  EgtOutLog("Operation ID " & nOperId.ToString & " isn't split cut! verify depth machining.")
+               End If
+            End If
+            ' se trasformabile in taglio di separazione, verifico se lo è
+            If Mach.m_bCanStartAll Or Mach.m_bCanEndAll Then
+               EgtSetCurrMachining(nOperId)
+               Dim nLiType As Integer
+               EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiType)
+               Dim nLoType As Integer
+               EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoType)
+               Mach.m_bStartAll = (nLiType = MCH_SAW_LI.EXT_CENT Or nLiType = MCH_SAW_LI.EXT_OUT)
+               Mach.m_bEndAll = (nLoType = MCH_SAW_LO.EXT_CENT Or nLoType = MCH_SAW_LO.EXT_OUT)
+            Else
+               Mach.m_bStartAll = False
+               Mach.m_bEndAll = False
+            End If
+         ' Waterjet
+         ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then
+            Mach.m_nInterf = FMI_TYPE.NONE
+            ' recupero l'angolo di fianco
+            EgtGetMachiningParam(MCH_MP.SIDEANGLE, Mach.m_dSideAng)
+            Mach.m_bCanStartAll = False
+            Mach.m_bCanEndAll = False
+            Mach.m_bStartAll = False
+            Mach.m_bEndAll = False
+         ' Forature e fresature
+         Else
+            Mach.m_nInterf = FMI_TYPE.NONE
+            Mach.m_dSideAng = 0
+            Mach.m_bCanStartAll = False
+            Mach.m_bCanEndAll = False
+            Mach.m_bStartAll = False
+            Mach.m_bEndAll = False
+         End If
+         ' abilitazione
+         Mach.m_bEnabled = Not EgtExistsInfo(nOperId, INFO_MCH_USER_OFF)
+         ' pausa
+         Mach.m_bPause = GetPause(nOperId)
+      Else
+         ' altrimenti la disattivo
+         EgtSetOperationMode(nOperId, False)
+         bOk = False
+      End If
+      Return bOk
+   End Function
+
+   Private Function CanExtendSides(CurrMach As SplitMach, ByRef bIn As Boolean, ByRef bOut As Boolean) As Boolean
+      If CurrMach.m_dPrevAng < -EPS_ANG_SMALL And CurrMach.m_dNextAng > EPS_ANG_SMALL Then
+         ' Posso estendere SOLO l'uscita
+         bOut = True
+         bIn = False
+      ElseIf CurrMach.m_dPrevAng > EPS_ANG_SMALL And CurrMach.m_dNextAng < -EPS_ANG_SMALL Then
+         ' Posso estendere SOLO l'ingresso
+         bIn = True
+         bOut = False
+      ElseIf CurrMach.m_dPrevAng < -EPS_ANG_SMALL And CurrMach.m_dNextAng < -EPS_ANG_SMALL Then
+         ' NON Posso estendere
+         bIn = False
+         bOut = False
+      Else
+         bIn = True
+         bOut = True
+      End If
+      Return True
+   End Function
+
    '-----------------------------------------------------------------------------------------------
+   ' calcolo il numero di tipi di lavorazioni
+   Friend Sub CountMachiningType(MachSplit As SplitMach, ByRef nCountSawing As Integer, ByRef nCountWaterjetting As Integer, ByRef nCountOtherMachining As Integer)
+      If MachSplit.m_nType = MCH_OY.SAWING Then
+         nCountSawing += 1
+      ElseIf MachSplit.m_nType = MCH_OY.WATERJETTING Then
+         nCountWaterjetting += 1
+      Else
+         nCountOtherMachining += 1
+      End If
+   End Sub
+
    Friend Sub ColorMachining(MachSplit As SplitMach, Optional bReset As Boolean = False)
       EgtDisableModified()
       ' Assegno stato
       Dim bEnabled As Boolean = MachSplit.m_bEnabled
       Dim nInterf As Integer = If(bReset, FMI_TYPE.NONE, MachSplit.m_nInterf)
       ' Colore della lavorazione principale
-      ColorSingleMachining(MachSplit.m_nId, MachSplit.m_sLay, MachSplit.m_dSideAng, bEnabled, nInterf)
+      ColorSingleMachining(MachSplit.m_nId, MachSplit.m_nType, MachSplit.m_sLay, MachSplit.m_dSideAng, bEnabled, nInterf)
       ' Colore delle lavorazioni inglobate
       For Each nId As Integer In MachSplit.m_vOthId
-         ColorSingleMachining(nId, MachSplit.m_sLay, MachSplit.m_dSideAng, bEnabled, nInterf)
+         ColorSingleMachining(nId, MachSplit.m_nType, MachSplit.m_sLay, MachSplit.m_dSideAng, bEnabled, nInterf)
       Next
       EgtEnableModified()
    End Sub
 
-   Private Sub ColorSingleMachining(nOperId As Integer, sLay As String, dSideAng As Double, bEnabled As Boolean, nInterf As Integer)
+   Private Sub ColorSingleMachining(nOperId As Integer, nOperType As Integer, sLay As String, dSideAng As Double, bEnabled As Boolean, nInterf As Integer)
       ' Verifico se è un taglio da sopra o da sotto
-      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or ( sLay = NAME_INLOOP AndAlso EgtExistsInfo( nOperId, INFO_FILOTOP)))
+      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or (sLay = NAME_INLOOP AndAlso EgtExistsInfo(nOperId, INFO_FILOTOP)))
       Dim bDrip As Boolean = (sLay = NAME_DRIPCUT Or sLay = NAME_UNDERDRILL)
+      ' Verifico se macchina con cambio utensile per lama
+      Dim bSawTc As Boolean = ( m_MainWindow.m_CurrentMachine.MountedToolConfig = CurrentMachine.MountedToolConfigs.TOOLCHANGERWITHSAW)
       ' Recupero il preview della lavorazione
       Dim nPvId As Integer = GDB_ID.NULL
       EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
@@ -202,22 +278,36 @@ Public Module SplitAuto
             Next
             EgtSetColor(nDwnCutId, COL_MCH_DISABLED)
             Dim bFreeStart As Boolean = (nInterf And FMI_TYPE.LI) <> FMI_TYPE.LI
-            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
-            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
             Dim bFreeEnd As Boolean = (nInterf And FMI_TYPE.LO) <> FMI_TYPE.LO
-            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
-            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
          Else
             Dim colCut As Color3d
             If bOnMach Then
                colCut = COL_MCH_ONCUT()
             ElseIf bDrip Then
                colCut = COL_MCH_DRIPCUT()
-            ElseIf Math.Abs(dSideAng) > EPS_ANG_SMALL Then
+            ElseIf nOperType = MCH_OY.WATERJETTING Then
+               If Math.Abs(dSideAng) > EPS_ANG_SMALL then
+                  colCut = COL_MCH_WJ_ANG()
+               Else   
+                  colCut = COL_MCH_WJ()
+               End If
+            ElseIf nOperType = MCH_OY.SAWING AndAlso bSawTc Then
+               Dim sSawing As String = String.Empty, sSaw As String = String.Empty
+               m_MainWindow.m_CadCutPageUC.m_SplitPage.GetMachiningAndTool(nOperId, sSawing, sSaw)
+               ' Setto l'utensile corrente
+               EgtTdbSetCurrTool(sSaw)
+               ' recupero il colore della lavorazione direttamente dall'utensile
+               colCut = Utility.GetColorPV()
+            ElseIf nOperType = MCH_OY.SAWING AndAlso Math.Abs(dSideAng) > EPS_ANG_SMALL Then
                colCut = COL_MCH_CUT_ANG()
             Else
                colCut = COL_MCH_CUT()
             End If
+
             For Each nId In vCutId
                EgtSetColor(nId, colCut)
             Next
@@ -325,6 +415,7 @@ Public Module SplitAuto
       Dim ptOri As Point3d
       EgtGetTableRef(1, ptOri)
       Dim vtOri As New Vector3d(ptOri.x, ptOri.y, ptOri.z)
+      ' ---------------------------------- GREZZI ----------------------------------
       ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
       Dim nRawId As Integer = EgtGetFirstRawPart()
       While nRawId <> GDB_ID.NULL
@@ -347,6 +438,13 @@ Public Module SplitAuto
                   vNewRaws.Add(nNewRawId)
                   nNewRawId = EgtGetNextRawPart(nNewRawId)
                End While
+            Else
+               ' verifico che nella fase precedente è stato definito come sfrido, allora lo riassegno
+               Dim nVal As Integer = 0
+               EgtGetInfo(nRawId, K_ISNEWSCRAPS, nVal)
+               If nVal = 1 Or nVal = 2 Or nVal = 3 Then
+                  EgtSetInfo(nRaw1Id, K_ISNEWSCRAPS, "3")
+               End If
             End If
             ' Assegno ai nuovi grezzi eventuale texture del grezzo originale
             Dim nSolidId = EgtGetFirstNameInGroup(nRawId, NAME_RAW_SOLID)
@@ -369,10 +467,19 @@ Public Module SplitAuto
          ' passo al successivo grezzo
          nRawId = EgtGetNextRawPart(nRawId)
       End While
+      ' ---------------------------------- GREZZI ----------------------------------
       ' Cancello preview dei tagli allungati dalla lavorazione
       For Each nCut As Integer In vCuts
          RemoveMachiningPreview(nCut)
       Next
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      ChangeOperationPhase(nNewPhase)
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      Return True
+   End Function
+
+   ' Sposta le lavorzioni della fase precedente a quella indicata
+   Friend Sub ChangeOperationPhase_ERR(nNewPhase As Integer)
       ' Sposto tutte le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
       Dim nId = EgtGetFirstOperation()
       While nId <> GDB_ID.NULL
@@ -393,9 +500,50 @@ Public Module SplitAuto
          End If
          nId = nNextId
       End While
-      Return True
-   End Function
+   End Sub
 
+   ' Miglioramento della gestione delle lavorazioni
+   Friend Sub ChangeOperationPhase(nNewPhase As Integer)
+      ' creo l'elenco delle lavorazioni che devono essere sposate
+      Dim MchList As New List(Of Integer)
+      ' Recupero le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
+      Dim nId = EgtGetFirstOperation()
+      While nId <> GDB_ID.NULL
+         Dim nNextId = EgtGetNextOperation(nId)
+         If IsValidMachining(nId) And EgtGetOperationPhase(nId) = nNewPhase - 1 And EgtExistsInfo(nId, INFO_MCH_USER_OFF) Then
+            ' Provo ad inserire la lavorazione nell'elenco
+            AddMach(MchList, nId)
+            ' sposto le inglobate
+            Dim sInfo As String = String.Empty
+            If EgtGetInfo(nId, INFO_MCH_OTHMID, sInfo) Then
+               Dim sItems() As String = sInfo.Split(",".ToCharArray)
+               For Each sId2 As String In sItems
+                  Dim nId2 As Integer = 0
+                  StringToInt(sId2, nId2)
+                  If nId2 > 0 Then
+                     ' Provo ad inserire la lavorazione nell'elenco
+                     AddMach(MchList, nId2)
+                  End If
+               Next
+            End If
+         End If
+         nId = nNextId
+      End While
+      ' Procedo ora a spostare le lavorazioni nella nuova disposizione
+      For Each ItemMchId As Integer In MchList
+         EgtChangeOperationPhase(ItemMchId, nNewPhase)
+      Next
+   End Sub
+
+   ' Inserisce gli inidici delle lavorazioni evitando di inserire dei doppioni
+   Private Sub AddMach(MchList As List(Of Integer), IdMch As Integer)
+      For Each Item As Integer In MchList
+         If IdMch = Item Then
+            Return
+         End If
+      Next
+      MchList.Add(IdMch)
+   End Sub
    '-----------------------------------------------------------------------------------------------
    Friend Function CalculateSplitAuto() As Boolean
       ' Fase iniziale
@@ -405,7 +553,7 @@ Public Module SplitAuto
       ' Reinserisco tutte le lavorazioni
       Dim nWarn As Integer = 0
       AddMachinings(GDB_ID.NULL, nWarn)
-      If nWarn = 1 Then m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage(EgtMsg(MSG_SPLITPAGEUC + 11)) ' Lama troppo grande per utilizzo ventosa
+      If nWarn = 1 Then m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage(EgtMsg(90351)) ' Lama troppo grande per utilizzo ventosa
       ' Carico ventose
       LoadVacuumCups()
       ' Lancio calcolo separazione
@@ -719,53 +867,81 @@ Public Module SplitAuto
 
    Private Function ExecMove(nDispId As Integer, vNewRaws As List(Of Integer),
                              vtMove As Vector3d, dMinMove As Double) As Boolean
-      Dim vtMove2 As Vector3d = -vtMove
+      Dim bTwoHeadVac As Boolean = (EgtGetHeadId(VACUUM_HEAD_2) <> GDB_ID.NULL)
       Dim rmData As New RawMoveData
-      If PutVacuumCupsOnRaw(vNewRaws(1), rmData) AndAlso
-                        SafeMoveRawPart(vNewRaws(1), vtMove, dMinMove) Then
+      Dim vtMove2 As Vector3d = -vtMove
+
+      VacuumCups.ResetHeadName()
+      Dim bPutVacuum As Boolean = PutVacuumCupsOnRaw(vNewRaws(1), rmData)
+      If Not bPutVacuum And bTwoHeadVac Then bPutVacuum = PutVacuumCupsOnRaw(vNewRaws(1), rmData)
+      If bPutVacuum AndAlso SafeMoveRawPart(vNewRaws(1), vtMove, dMinMove) Then
          rmData.m_vtRawMove = vtMove
          SaveOneMoveInfoInDisposition(nDispId, rmData)
          Return True
-      ElseIf PutVacuumCupsOnRaw(vNewRaws(0), rmData) AndAlso
-                        SafeMoveRawPart(vNewRaws(0), vtMove2, dMinMove) Then
+      End If
+
+      VacuumCups.ResetHeadName()
+      Dim bPut2Vacuum As Boolean = PutVacuumCupsOnRaw(vNewRaws(0), rmData)
+      If Not bPut2Vacuum And bTwoHeadVac Then bPutVacuum = PutVacuumCupsOnRaw(vNewRaws(0), rmData)
+      If bPut2Vacuum AndAlso SafeMoveRawPart(vNewRaws(0), vtMove2, dMinMove) Then
          rmData.m_vtRawMove = vtMove2
          SaveOneMoveInfoInDisposition(nDispId, rmData)
          Return True
-      Else
-         Return False
       End If
+
+      Return False
    End Function
 
    Private Function SafeMoveRawPart(nRawId As Integer, ByRef vtMove As Vector3d, dMindist As Double) As Boolean
+      ' Spostamento originale
+      Dim vtOriMove As New Vector3d(vtMove)
+      ' Livello di movimento
+      Dim nMoveLevel As Integer = GetPrivateProfileInt(S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
+      Dim nMove As Integer = 1
       ' Se esce dalla tavola, movimento già annullato ed esco con errore
-      If Not EgtMoveRawPart(nRawId, vtMove) Then Return False
+      If Not EgtMoveRawPart(nRawId, vtOriMove) Then Return False
       ' Se interferisce con altri grezzi, annullo movimento ed esco con errore
       If Not VerifyRawWithOtherRaws(nRawId, dMindist) Then
-         EgtMoveRawPart(nRawId, -vtMove)
+         EgtMoveRawPart(nRawId, -vtOriMove)
          Return False
       End If
+      If nMoveLevel < 2 Then Return True
       ' Provo ad aggiungere un altro movimento
-      If EgtMoveRawPart(nRawId, vtMove) Then
+      If EgtMoveRawPart(nRawId, vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += vtMove
+            vtMove += vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then Return True
          Else
-            EgtMoveRawPart(nRawId, -vtMove)
+            EgtMoveRawPart(nRawId, -vtOriMove)
+         End If
+      End If
+      ' Provo ad aggiungere un altro movimento
+      If EgtMoveRawPart(nRawId, vtOriMove) Then
+         If VerifyRawWithOtherRaws(nRawId, dMindist) Then
+            vtMove += vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then Return True
+         Else
+            EgtMoveRawPart(nRawId, -vtOriMove)
          End If
       End If
       ' Provo ad aggiungere un movimento dimezzato
-      If EgtMoveRawPart(nRawId, 0.5 * vtMove) Then
+      If EgtMoveRawPart(nRawId, 0.5 * vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += 0.5 * vtMove
+            vtMove += 0.5 * vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then Return True
          Else
-            EgtMoveRawPart(nRawId, -0.5 * vtMove)
+            EgtMoveRawPart(nRawId, -0.5 * vtOriMove)
          End If
       End If
-      ' Provo ad aggiunger un movimento 1/4
-      If EgtMoveRawPart(nRawId, 0.25 * vtMove) Then
+      ' Provo ad aggiungere un movimento 1/4
+      If EgtMoveRawPart(nRawId, 0.25 * vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += 0.25 * vtMove
+            vtMove += 0.25 * vtOriMove
          Else
-            EgtMoveRawPart(nRawId, -0.25 * vtMove)
+            EgtMoveRawPart(nRawId, -0.25 * vtOriMove)
          End If
       End If
       Return True
@@ -817,4 +993,30 @@ Public Module SplitAuto
       Return (Not bInterf)
    End Function
 
+   Public Function MaxCuttingMustache(dMustache As Double) As Double
+      Dim MachSplitList As New List(Of SplitMach)
+      ' Recupero l'indice della fase corrente
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      ' se non è stata creata nessuna lista allora restituisco il valore di Default
+      If Not CalculateSplitMachList(nCurrPhase, MachSplitList) Then Return dMustache
+      Dim NewMustache As Double = 0
+      Dim ItemMachSplit As SplitMach
+      For Each ItemMachSplit In MachSplitList
+         ' Recupero lunghezza baffo secondo taglio
+         Dim nPvId As Integer = GDB_ID.NULL
+         EgtGetInfo(EgtGetFirstNameInGroup(ItemMachSplit.m_nId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+         Dim dDT As Double
+         If EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT) Then
+            If NewMustache < dDT Then NewMustache = dDT
+         End If
+      Next
+      Dim dExtraL As Double = 0
+      EgtMdbGetGeneralParam(MCH_GP.EXTRALONCUTREG, dExtraL)
+      ' se esiste il valore di un baffo allora sovrascrivo il valore di default
+      If NewMustache > 0 Then
+         dMustache = Math.Ceiling(NewMustache)
+      End If
+      Return dMustache + dExtraL
+   End Function
+
 End Module

CadCuts/SplitPageUC.xaml

@@ -1,10 +1,10 @@
 <UserControl x:Class="SplitPageUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="SplitPageUC_Initialized">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="SplitPageUC_Initialized">
 
    <!-- Definizione della SplitPage -->
    <Grid Name="SplitPageGrid" >
@@ -35,10 +35,10 @@
             </Grid.ColumnDefinitions>
 
             <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
             <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
+               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{DynamicResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
                   <Image.RenderTransform>
                      <TransformGroup>
                         <RotateTransform Angle="180"/>
@@ -63,17 +63,52 @@
             <RowDefinition Height="1*"/>
          </Grid.RowDefinitions>
 
-         <ListBox Name="MachiningLsBx" Grid.Row="1" ItemTemplate="{DynamicResource NameIdLsBxItem}"
-            SelectionMode="Extended">
-            <ListBox.ItemContainerStyle>
-               <Style TargetType="ListBoxItem">
-                  <Style.Triggers>
-                     <DataTrigger Binding="{Binding bIsActive}" Value="False">
-                        <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
-                     </DataTrigger>
-                  </Style.Triggers>
-               </Style>
-            </ListBox.ItemContainerStyle>
+         <ListBox Name="MachiningLsBx" Grid.Row="1"
+                  SelectionMode="Extended">
+            <ListBox.ItemTemplate>
+               <DataTemplate>
+                  <Grid Width="210">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2.8*"/>
+                        <ColumnDefinition Width="1.2*"/>
+                        <ColumnDefinition Width="Auto"/>
+                     </Grid.ColumnDefinitions>
+                     <TextBlock Text="{Binding Name}">
+                        <TextBlock.Style>
+                           <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_CurrProjSummeryTextBlock}">
+                              <Style.Triggers>
+                                 <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                                    <Setter Property="TextDecorations" Value="Strikethrough"/>
+                                    <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                                 </DataTrigger>
+                                 <DataTrigger Binding="{Binding bIsActive}" Value="True">
+                                    <Setter Property="Foreground" Value="Black"/>
+                                 </DataTrigger>
+                              </Style.Triggers>
+                           </Style>
+                        </TextBlock.Style>
+                     </TextBlock>
+                     <TextBlock Grid.Column="1" Text="{Binding TCPos}">
+                        <TextBlock.Style>
+                           <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_CurrProjSummeryTextBlock}">
+                              <Style.Triggers>
+                                 <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                                    <Setter Property="TextDecorations" Value="Strikethrough"/>
+                                    <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                                 </DataTrigger>
+                                 <DataTrigger Binding="{Binding bIsActive}" Value="True">
+                                    <Setter Property="Foreground" Value="Black"/>
+                                 </DataTrigger>
+                              </Style.Triggers>
+                           </Style>
+                        </TextBlock.Style>
+                     </TextBlock>
+                     <Rectangle Grid.Column="2"
+                                Visibility="{Binding MachiningTCPosVisibility}"
+                                Style="{DynamicResource Rect_SplitPage}"/>
+                  </Grid>
+               </DataTemplate>
+            </ListBox.ItemTemplate>
          </ListBox>
 
          <Grid Grid.Row="2">
@@ -85,11 +120,17 @@
             </Grid.ColumnDefinitions>
 
             <Button Name="MoveUpBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+               <Image Source="{DynamicResource UpArrowImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
             </Button>
             <Button Name="MoveDownBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+               <Image Source="{DynamicResource DownArrowImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
             </Button>
+            <ToggleButton Name="LayNbArrTgBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowIconToggleButton}"
+                          Height="25" Width="25">
+               <Image Name="LayNbArrImg" 
+                      HorizontalAlignment="Center"
+                      VerticalAlignment="Center" Stretch="Uniform"/>
+            </ToggleButton>
 
          </Grid>
 
@@ -100,9 +141,15 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="OnOffBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="AllOnBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="AllOffBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
+            <Button Name="OnOffBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource ON_OFF-singolo-taglioImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllOnBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Tutti-ONImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="AllOffBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Tutti-OFFImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
          </Grid>
 
@@ -113,9 +160,34 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-            <Button Name="CutEndBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
+            <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Allunga-AccorciaImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+
+            <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Inizio-Allunga-AccorciaImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+
+            <Button Name="CutEndBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Fine-Allunga-AccorciaImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+
+            <!-- solo per macchine con lavorazioni Waterjet -->
+            <ToggleButton Name="BridgesWJBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource PonticelliWJImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
+
+            <!--solo per macchine con lavorazioni Waterjet-->
+            <Button Name="QualityWJBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource QualityWJImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+
+            <!-- solo per macchine con lavorazioni Waterjet -->
+            <ToggleButton Name="BridgesDeleteWJBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource PonticelliDeleteWJImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
+
+
 
          </Grid>
 
@@ -139,18 +211,42 @@
          </Grid.ColumnDefinitions>
 
 
-         <Button Name="OutCenStartBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="OutCenEndBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="ModifStartBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="ModifEndBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="InvertBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="PauseBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllOutStartBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllCenStartBtn" Grid.Column="7" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllOutEndBtn" Grid.Column="8" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllCenEndBtn" Grid.Column="9" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllExtendBtn" Grid.Column="10" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
-         <Button Name="AllReduceBtn" Grid.Column="11" Style="{DynamicResource OmagCut_YellowTextButton}" FontSize="{DynamicResource SplitPageBtn_FontSize}"/>
+         <Button Name="OutCenStartBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Inizio-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="OutCenEndBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Fine-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="ModifStartBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Modifica-InizioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="ModifEndBtn" Grid.Column="3"  Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Modifica-FineImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="InvertBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource InvertiImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="PauseBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllOutStartBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Inizio-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllCenStartBtn" Grid.Column="7" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Inizio-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllOutEndBtn" Grid.Column="8" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Fine-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllCenEndBtn" Grid.Column="9" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Fine-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllExtendBtn" Grid.Column="10" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Tutti-allungaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllReduceBtn" Grid.Column="11" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Tutti-accorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
 
       </Grid>
 

CadCuts/VacuumCups.vb

@@ -8,11 +8,41 @@ Module VacuumCups
    Private m_nVacId As Integer = GDB_ID.NULL
    Private m_nRefId As Integer = GDB_ID.NULL
    Private m_dPreferredRot As Double = 0
+   Private m_dPrefVertRotXMinus As Double = 0
+   Private m_dPrefVertRotXPlus As Double = 0
+   Private m_dPrefVertRotYMinus As Double = 0
+   Private m_dPrefVertRotYPlus As Double = 0
    Private m_dDripRefAng As Double = 0
+   ' dati carico massimo manipolatore
+   Private m_RawDensity As Double = 2500
+   Private m_RawWeight As Double = 0
+   Private m_MaxWeightSinglePlugger As Double = 250
+   Private m_MaxWeightDoublePlugger As Double = 750
+   Public  m_bOverWeight As Boolean = False
+   ' dati per rotazione ventose vicino al fine corsa Y e X
+   Private m_bRotateVacuumNearExtraStrokeY As Boolean = False
+   Private m_bRotateVacuumNearExtraStrokeX As Boolean = False
+   ' dati stroke
+   Public  m_bExtraStroke As Boolean = False
+   Public  m_ptStartPointLift As Point3d
+   Public  m_dDegRotStartAng As Double
 
    ' Nome del gruppo temporaneo per le ventose
    Private Const VACTMP_GRP As String = "VacTmp"
 
+   Private m_sHeadName As String = VACUUM_HEAD
+   Public Sub ResetHeadName()
+      Dim bReload As Boolean = (m_sHeadName <> VACUUM_HEAD)
+      m_sHeadName = VACUUM_HEAD
+      If bReload Then LoadVacuumCups()
+   End Sub
+   Public Function ChangeHeadName() As Boolean
+      If EgtGetHeadId( VACUUM_HEAD_2) = GDB_ID.NULL Then Return False
+      m_sHeadName = If( m_sHeadName = VACUUM_HEAD, VACUUM_HEAD_2, VACUUM_HEAD) 
+      LoadVacuumCups()
+      Return True
+   End Function
+
    '-----------------------------------------------------------------------------------------------
    Friend Class RawMoveData
 
@@ -48,6 +78,20 @@ Module VacuumCups
       Return m_nVacType
    End Function
 
+   ' carico i dati macchina relativi al peso massimo movimentabile
+   Friend Sub SetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
+      m_RawDensity = Density
+      m_MaxWeightSinglePlugger = MaxSingle
+      m_MaxWeightDoublePlugger = MaxDouble
+   End Sub
+
+   Friend Sub SetRotationForExtraStrokeY(bRotate As Boolean)
+      m_bRotateVacuumNearExtraStrokeY = bRotate
+   End Sub
+
+   Friend Sub SetRotationForExtraStrokeX(bRotate As Boolean)
+      m_bRotateVacuumNearExtraStrokeX = bRotate
+   End Sub
    Friend Function GetVacuumId() As Integer
       Return m_nVacId
    End Function
@@ -55,15 +99,17 @@ Module VacuumCups
    Friend Function LoadVacuumCups() As Boolean
       ' Leggo tipo manipolatore con ventosa
       m_nVacType = 0
-      EgtGetInfo(EgtGetHeadId(VACUUM_HEAD), KEY_VAC_TYPE, m_nVacType)
+      EgtGetInfo(EgtGetHeadId(m_sHeadName), KEY_VAC_TYPE, m_nVacType)
       ' Cancello eventuali vecchie ventose
       RemoveVacuumCups()
       ' Identificativo ventose nella macchina
-      Dim nLayId As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), VACUUM_HEAD_LAYOUT)
+      Dim nLayId As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(m_sHeadName), VACUUM_HEAD_LAYOUT)
       If nLayId = GDB_ID.NULL Then Return False
       ' Identificativo riferimento della testa nella macchina
-      Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT)
+      Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(m_sHeadName), HEAD_FIRST_EXIT)
       If nT1Id = GDB_ID.NULL Then Return False
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", m_sHeadName, 1)
       ' Creo gruppo temporaneo in cui copiarli
       m_nTempId = EgtCreateGroup(GDB_ID.ROOT)
       If m_nTempId = GDB_ID.NULL Then Return False
@@ -73,18 +119,23 @@ Module VacuumCups
       m_nVacId = EgtCopyGlob(nLayId, m_nTempId)
       If m_nVacId = GDB_ID.NULL Then Return False
       ' Angolo di rotazione preferito
-      EgtGetInfo( m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
+      ' Angoli di rotazione preferiti per ventosa in verticale (lungo Y) a sinistra e a destra del centro tavola
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYMINUS, m_dPrefVertRotYMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYPLUS, m_dPrefVertRotYPlus)
       ' Direzione di riferimento per tagli Drip
-      EgtGetInfo( m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
       ' Nascondo il gruppo ma rendo visibili le curve di contorno delle ventose
       EgtSetStatus(m_nVacId, GDB_ST.OFF)
       Dim nId As Integer = EgtGetFirstInGroup(m_nVacId)
       While nId <> GDB_ID.NULL
          Select Case EgtGetType(nId)
-         Case GDB_TY.CRV_LINE, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO
-            EgtSetStatus(nId, GDB_ST.ON_)
-         Case Else
-            EgtSetStatus(nId, GDB_ST.OFF)
+            Case GDB_TY.CRV_LINE, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO
+               EgtSetStatus(nId, GDB_ST.ON_)
+            Case Else
+               EgtSetStatus(nId, GDB_ST.OFF)
          End Select
          nId = EgtGetNext(nId)
       End While
@@ -113,7 +164,7 @@ Module VacuumCups
    Friend Function ResetVacuumCups() As Boolean
       ' Ripristino posizione e rotazione originali
       Dim frOriRef As New Frame3d
-      EgtFrame(EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT), GDB_ID.ROOT, frOriRef)
+      EgtFrame(EgtGetFirstNameInGroup(EgtGetHeadId(m_sHeadName), HEAD_FIRST_EXIT), GDB_ID.ROOT, frOriRef)
       Dim frCurrRef As New Frame3d
       EgtFrame(m_nRefId, GDB_ID.ROOT, frCurrRef)
       EgtMove(m_nVacId, frOriRef.Orig() - frCurrRef.Orig(), GDB_RT.GLOB)
@@ -125,10 +176,10 @@ Module VacuumCups
       Dim nId As Integer = EgtGetFirstInGroup(m_nVacId)
       While nId <> GDB_ID.NULL
          Select Case EgtGetType(nId)
-         Case GDB_TY.CRV_LINE, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO
-            EgtSetStatus(nId, GDB_ST.ON_)
-         Case Else
-            EgtSetStatus(nId, GDB_ST.OFF)
+            Case GDB_TY.CRV_LINE, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO
+               EgtSetStatus(nId, GDB_ST.ON_)
+            Case Else
+               EgtSetStatus(nId, GDB_ST.OFF)
          End Select
          nId = EgtGetNext(nId)
       End While
@@ -160,10 +211,25 @@ Module VacuumCups
       EgtGetBBoxGlob(nRKerfId, GDB_BB.STANDARD, b3Kerf)
       Dim ptKerfCen As Point3d
       EgtCentroid(nRKerfId, GDB_ID.ROOT, ptKerfCen)
+
+      '-------------------- INIZIO CALCOLO PESO --------------------
+      ' recupero l'area del grezzo da muovere
+      Dim RawArea As Double = 0
+      ' superficie del grezzo senza considerare eventuali fori
+      EgtSurfFrGrossArea(nRKerfId, RawArea)
+      ' volume calcolato in mmc
+      Dim RawVolume As Double = RawArea * b3Raw.DimZ()
+      ' peso calcolato in kg
+      m_RawWeight = RawVolume * m_RawDensity / Math.Pow(10, 9)
+      '-------------------- FINE CALCOLO PESO --------------------
+
       ' Eseguo ricerca
       If FindVacuumCupsOnRaw(nRawId, ptRawCen, b3Kerf, ptKerfCen, nKerfId, nRKerfId, rmData) Then
          Return True
+      Else
+         If ChangeHeadName() Then Return False
       End If
+
       ' In caso di fallimento, provo riducendo con offset la regione di kerf
       ' (così si simula la proiezione del centro sul MAT - medial axis transform)
       Dim bOkFind As Boolean = False
@@ -182,6 +248,7 @@ Module VacuumCups
       Return False
    End Function
 
+   ' utilizzata per gestire la movimentazione dei pezzi per eseguire i drip
    Friend Function PutVacuumCupsOnPart(nPartId As Integer,
                                        ByRef rmData As RawMoveData, ByRef b3Part As BBox3d) As Boolean
       ' Ripristino posizione originale ventose
@@ -189,20 +256,20 @@ Module VacuumCups
       ' Verifico sia veramente un pezzo
       If EgtGetRawPartFromPart(nPartId) = GDB_ID.NULL Then Return False
       ' Cerco la direzione del primo taglio attivo da sotto
-      Dim nDripLayId As Integer = EgtGetFirstNameInGroup( nPartId, NAME_DRIPCUT)
-      Dim nDripLineId As Integer = EgtGetFirstInGroup( nDripLayId)
+      Dim nDripLayId As Integer = EgtGetFirstNameInGroup(nPartId, NAME_DRIPCUT)
+      Dim nDripLineId As Integer = EgtGetFirstInGroup(nDripLayId)
       While nDripLineId <> GDB_ID.NULL
-         Dim nMchId As Integer = EgtGetOperationId( "DripSaw" & nDripLineId.ToString())
+         Dim nMchId As Integer = EgtGetOperationId("DripSaw" & nDripLineId.ToString())
          Dim nMode As Integer
-         If EgtGetMode( nMchId, nMode) AndAlso nMode = GDB_MD.STD Then Exit While
-         nDripLineId = EgtGetNext( nDripLineId)
+         If EgtGetMode(nMchId, nMode) AndAlso nMode = GDB_MD.STD Then Exit While
+         nDripLineId = EgtGetNext(nDripLineId)
       End While
       Dim vtDir As New Vector3d
-      if EgtStartVector( nDripLineId, GDB_ID.ROOT, vtDir) Then
+      If EgtStartVector(nDripLineId, GDB_ID.ROOT, vtDir) Then
          Dim dLen, dAngV, dAngH As Double
-         vtDir.ToSpherical( dLen, dAngV, dAngH)
+         vtDir.ToSpherical(dLen, dAngV, dAngH)
          Dim dOffsAng = dAngH - m_dDripRefAng
-         While dOffsAng - m_dPreferredRot >= 90 
+         While dOffsAng - m_dPreferredRot >= 90
             dOffsAng -= 180
          End While
          While dOffsAng - m_dPreferredRot <= -90
@@ -261,6 +328,7 @@ Module VacuumCups
          Dim sCups() As String = Nothing
          Dim sCups2() As String = Nothing
          If Not GetVacuumCupSelection(nI, sCups, sCups2) Then Return False
+         m_bExtraStroke = False
          ' Determino validità soluzioni della configurazione
          Dim vtMove As New Vector3d
          Dim ptRotCen As New Point3d
@@ -269,6 +337,8 @@ Module VacuumCups
          Dim ptRotCen2 As New Point3d
          Dim dRotAngDeg2 As Double = 0
          Dim dDist = TestVacuumCupSelection(sCups, b3Kerf, ptKerfCen, nOutlineId, nRKerfId, vtMove, ptRotCen, dRotAngDeg)
+         Dim ptStartPointLift_1 As New Point3d( m_ptStartPointLift)
+         Dim dDegRotStartAng_1 As Double = m_dDegRotStartAng
          Dim dDist2 = TestVacuumCupSelection(sCups2, b3Kerf, ptKerfCen, nOutlineId, nRKerfId, vtMove2, ptRotCen2, dRotAngDeg2)
          If dDist > INFINITO - 1 And dDist2 > INFINITO - 1 Then Continue For
          If dDist2 < dDist Then
@@ -276,6 +346,9 @@ Module VacuumCups
             vtMove = vtMove2
             ptRotCen = ptRotCen2
             dRotAngDeg = dRotAngDeg2
+         Else
+            m_ptStartPointLift = ptStartPointLift_1
+            m_dDegRotStartAng = dDegRotStartAng_1
          End If
          ' Eseguo il movimento
          EgtMove(m_nVacId, vtMove, GDB_RT.GLOB)
@@ -289,6 +362,7 @@ Module VacuumCups
          Dim frCurrRef As New Frame3d
          EgtFrame(m_nRefId, GDB_ID.ROOT, frCurrRef)
          Dim vtDelta As Vector3d = frCurrRef.Orig() - ptRawCen
+
          ' Assegno dati noti al movimento del grezzo
          rmData.m_nId = nRawId
          rmData.m_vtRawMove = Vector3d.NULL()
@@ -334,7 +408,7 @@ Module VacuumCups
 
    Private Function GetVacRotAxisSteps(ByRef vAngRot As List(Of Double)) As Boolean
       ' Recupero l'asse rotante della testa ventosa
-      Dim nRotAxId As Integer = EgtGetParent(EgtGetHeadId(VACUUM_HEAD))
+      Dim nRotAxId As Integer = EgtGetParent(EgtGetHeadId(m_sHeadName))
       ' Verifico se contiene info con STEPS
       Dim sSteps As String = ""
       If Not EgtGetInfo(nRotAxId, KEY_ROTVAC_STEPS, sSteps) Then Return False
@@ -363,6 +437,26 @@ Module VacuumCups
       If b3Vac.IsEmpty() Then Return INFINITO
       ' Se box maggiore di quello del pezzo, scarto soluzione
       If b3Vac.Radius() > b3Raw.Radius() Then Return INFINITO
+      '-------------------- INIZIO VERIFICA PESO --------------------
+      m_bOverWeight = False
+      Select Case GetPluggerFromCameras(sCups)
+         Case 2
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightDoublePlugger Then
+               m_bOverWeight = True
+               Return INFINITO
+            End If
+         Case 1
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightSinglePlugger Then
+               m_bOverWeight = True
+               Return INFINITO
+            End If
+      End Select
+      '-------------------- FINE VERIFICA PESO --------------------
+      ' Recupero l'area della tavola
+      Dim b3Tab As New BBox3d
+      EgtGetTableArea(1, b3Tab)
       ' Determino il movimento
       vtMove = ptRawCen - b3Vac.Center()
       b3Vac.Move(vtMove)
@@ -374,11 +468,30 @@ Module VacuumCups
          frMinRect.VersX().ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
          dRotAngDeg = dAngOrizzDeg
          If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
-         Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
-         While dRotAngDeg - m_dPreferredRot >= dAngDelta / 2 
+         Dim dPreferredRot As Double = m_dPreferredRot
+         ' -------------------- INIZIO GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
+         ' verifico l'orientamento del pezzo
+         If m_bRotateVacuumNearExtraStrokeX And Not IsHorizontal(dAngOrizzDeg) Then
+            ' se l'orientamento è verticale
+            If frMinRect.Orig().x < b3Tab.Center().x Then
+               dPreferredRot = m_dPrefVertRotXMinus
+            Else
+               dPreferredRot = m_dPrefVertRotXPlus
+            End If
+         ElseIf m_bRotateVacuumNearExtraStrokeY And IsHorizontal(dAngOrizzDeg) Then
+            ' se l'orientemanto è orizzontale e la macchina è stata abilitata
+            If frMinRect.Orig().y < b3Tab.Center().y Then
+               dPreferredRot = m_dPrefVertRotYPlus
+            Else
+               dPreferredRot = m_dPrefVertRotYMinus
+            End If
+         End If
+         ' -------------------- FINE GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
+         Dim dAngDelta As Double = If(Math.Abs(b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
+         While dRotAngDeg - dPreferredRot >= dAngDelta / 2
             dRotAngDeg -= dAngDelta
          End While
-         While dRotAngDeg - m_dPreferredRot <= -dAngDelta / 2
+         While dRotAngDeg - dPreferredRot <= -dAngDelta / 2
             dRotAngDeg += dAngDelta
          End While
       Else
@@ -400,15 +513,15 @@ Module VacuumCups
          ' Ordino secondo distanza angolare crescente da direzione di allineamento (modulo 180 deg)
          Dim dRotRefDeg As Double = dRotAngDeg
          vAngRot.Sort(Function(P, Q)
-                         Dim dDiffP = Math.Abs( P - dRotRefDeg)
-                         If Math.Abs( dDiffP - 180) < 10 * EPS_ANG_SMALL Then dDiffP = 1
-                         Dim dDiffQ = Math.Abs( Q - dRotRefDeg)
-                         If Math.Abs( dDiffQ - 180) < 10 * EPS_ANG_SMALL Then dDiffQ = 1
-                         Return ( dDiffP - dDiffQ)
+                         Dim dDiffP = Math.Abs(P - dRotRefDeg)
+                         If Math.Abs(dDiffP - 180) < 10 * EPS_ANG_SMALL Then dDiffP = 1
+                         Dim dDiffQ = Math.Abs(Q - dRotRefDeg)
+                         If Math.Abs(dDiffQ - 180) < 10 * EPS_ANG_SMALL Then dDiffQ = 1
+                         Return (dDiffP - dDiffQ)
                       End Function)
          ' Annullo la rotazione di allineamento
          dRotAngDeg = 0
-      ' altrimenti in continuo
+         ' altrimenti in continuo
       Else
          ' Assegno più valori di ricerca e conservo angolo di allineamento
          vAngRot.AddRange({0, +5, -5, +12.5, -12.5, +25, -25, +45, -45})
@@ -430,13 +543,94 @@ Module VacuumCups
       ' Applico movimento e rotazione al punto
       ptRef.Move(vtMove)
       ptRef.Rotate(ptRotCen, Vector3d.Z_AX(), dRotAngDeg)
+
+      ' -------------- INIZIO verifica di essere nel limite delle corse macchina --------------
+      If VerifyOutOfStrokes(ptRef, dRotAngDeg) <> 0 Then
+         m_bExtraStroke = True
+         Return INFINITO
+      End If
+      ' se la posizione è accettbaile allora salvo i dati
+      m_ptStartPointLift = ptRef
+      m_dDegRotStartAng = dRotAngDeg
+      ' -------------- FINE verifica di essere nel limite delle corse macchina --------------
+
       ' Ne calcolo la distanza dal centro della tavola
-      Dim b3Tab As New BBox3d
-      EgtGetTableArea(1, b3Tab)
       Dim dDist As Double = Point3d.DistXY(ptRef, b3Tab.Center())
       Return dDist
    End Function
 
+   Private Function IsHorizontal(dDegAng As Double) As Boolean
+      If (Math.Abs(dDegAng) > 45 And Math.Abs(dDegAng) < 135) Or (Math.Abs(dDegAng) > 225 And Math.Abs(dDegAng) < 315) Then
+         Return False
+      End If
+      Return True
+   End Function
+
+   ' assegnate le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
+      ' Se macchina con ventosa dietro (VacType=1) non eseguo nessun controllo
+      If GetVacuumType() = 1 Then Return 0
+      ' Verifico se usare l'asse W per la gestione delle ventose
+      Dim sAxisName As String = "C"
+      ' verifico che il nome dell'asse impostato sia corretto
+      If EgtGetAxisId(sAxisName) = GDB_ID.NULL Then
+         If m_sHeadName = VACUUM_HEAD Then
+            sAxisName = "C1"
+         Else
+            sAxisName = "C2"
+         End If
+      End If
+      ' Posizione Home dell'asse rotante
+      Dim dCHome As Double
+      EgtGetAxisHomePos(sAxisName, dCHome)
+      ' Corse dell'asse
+      Dim dCMin As Double
+      EgtGetAxisMin(sAxisName, dCMin)
+      Dim dCMax As Double
+      EgtGetAxisMax(sAxisName, dCMax)
+      ' Porto l'angolo nel range
+      Dim dRotAngMachDeg As Double = dRotAngDeg + dCHome
+      AdjustAngleInRange(dRotAngMachDeg, dCMin, dCMax)
+      ' Imposto la ventosa come fosse un utensile
+      EgtSetCalcTool("", m_sHeadName, 1)
+      ' Calcolo gli assi macchina
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      If EgtGetAxisId("A") <> GDB_ID.NULL Then
+         ' Asse tavola rotante (movimenti solo con A0)
+         EgtGetCalcPositions(ptRef, 0, dRotAngMachDeg, nStat, dX, dY, dZ)
+         ' Verifico le corse
+         EgtVerifyOutstroke(dX, dY, dZ, 0, dRotAngMachDeg, nStat)
+      Else
+         EgtGetCalcPositions(ptRef, dRotAngMachDeg, 0, nStat, dX, dY, dZ)
+         ' Verifico le corse
+         EgtVerifyOutstroke(dX, dY, dZ, dRotAngMachDeg, 0, nStat)
+      End If
+
+
+      Return nStat
+   End Function
+
+   ' dall'informazione di extra corsa recupera il valore indicato
+   Public Function GetExtraStrokeValue(sInfo As String) As Double
+      Dim dExtraStroke As Double = 0
+      Dim sItems As String() = sInfo.Split("="c)
+      If sItems.Count = 2 Then
+         Dim nStartIndex As Integer = 0
+         For Each ItemChar As Char In sItems(1)
+            If ItemChar = "("c Then
+               Exit For
+            End If
+            nStartIndex += 1
+         Next
+         If nStartIndex > 0 Then
+            Dim sValue As String = sItems(1).Remove(nStartIndex, sItems(1).Count - nStartIndex)
+            StringToLen(sValue, dExtraStroke)
+         End If
+      End If
+      Return dExtraStroke
+   End Function
+
    Private Function TestVacuumCups(nCups() As Integer, nRawRegId As Integer,
                                    vtMove As Vector3d, ptRotCen As Point3d, dRotAngDeg As Double) As Boolean
       ' Eseguo verifica delle ventose rispetto al grezzo
@@ -457,6 +651,28 @@ Module VacuumCups
       Return bVacOk
    End Function
 
+   ' dato il vettore delle camere restituisco il quali attuatori sono coinvolti
+   Private Function GetPluggerFromCameras(sCups() As String) As Integer
+      Dim nCountPlunger As Integer = 1
+      Dim bPlugger1 As Boolean = False
+      Dim bPlugger2 As Boolean = False
+      For Each Camera As String In sCups
+         If (Camera.Contains("1") Or Camera.Contains("2") Or Camera.Contains("3")) Then
+            bPlugger1 = True
+         Else
+            bPlugger2 = True
+         End If
+      Next
+      ' verifico quali sono le camere attive
+      If bPlugger1 And bPlugger2 Then
+         nCountPlunger = 2
+      ElseIf Not bPlugger1 And Not bPlugger2 Then
+         nCountPlunger = 0
+      End If
+      ' restituisco il numero di Plugger in uso
+      Return nCountPlunger
+   End Function
+
    Friend Function SaveOneMoveInfo(nId As Integer, rmData As RawMoveData) As Boolean
       ' Assegno le informazioni
       EgtSetInfo(nId, "Id", rmData.m_nId)
@@ -557,7 +773,7 @@ Module VacuumCups
             rmList.RemoveAt(nInd)
             nInd = rmList.Count() - 1
          End If
-      ' Se non trovato, lo accodo
+         ' Se non trovato, lo accodo
       Else
          rmList.Add(New RawMoveData(nRawId))
          nInd = rmList.Count() - 1

Constants/ConstGen.vb

@@ -67,6 +67,8 @@ Module ConstGen
    Public Const MACHININGS_DIR As String = "Machinings"
    ' Nome file Dati delle lucidature
    Public Const KITS_FILE As String = "Kits.data"
+   ' Nome file Dati per waterJet
+   Public Const WATERJETDB_FILE As String = "WaterjetDB.data"
 
    ' File dei pezzi rovinati
    Public Const CURR_RUINED_EPL As String = "RuinedParts.epl"
@@ -82,6 +84,11 @@ Module ConstGen
 
    ' Nome testa con ventose per spostamento pezzi
    Public Const VACUUM_HEAD As String = "H4"
+   Public Const VACUUM_HEAD_2 As String = "H104"
+   ' Nome teste laser
+   Public Const LASER_HEAD As String = "H3"
+   Public Const LASER_HEAD_2 As String = "H103"
+
    ' Info tipo ventosa
    Public Const KEY_VAC_TYPE As String = "VacType"
    ' Nome gruppo layout in testa con ventose
@@ -90,6 +97,10 @@ Module ConstGen
    Public Const KEY_VACLAY_SEL As String = "Sel"
    ' Info in gruppo layout per angolo di rotazione preferito
    Public Const KEY_VACLAY_PREFROT As String = "PreferredRot"
+   Public Const KEY_VACLAY_PREFVROTXMINUS As String = "PrefVertRotXMinus"
+   Public Const KEY_VACLAY_PREFVROTXPLUS As String = "PrefVertRotXPlus"
+   Public Const KEY_VACLAY_PREFVROTYMINUS As String = "PrefVertRotYMinus"
+   Public Const KEY_VACLAY_PREFVROTYPLUS As String = "PrefVertRotYPlus"
    ' Info in gruppo layout per direzione di riferimento ventose per tagli da sotto
    Public Const KEY_VACLAY_DRIPREFDIR As String = "DripRefDir"
    ' Info in asse rotante ventosa per step discreti
@@ -101,6 +112,7 @@ Module ConstGen
    Public Const MAIN_TAB As String = "MainTab"
    Public Const SECOND_TAB As String = "2ndTab"
    Public Const THIRD_TAB As String = "3rdTab"
+   Public Const FORTH_TAB As String = "4thTab"
    ' Nome tavola ausiliaria per spostamento finale pezzi
    Public Const AUX_TAB As String = "AuxTab"
 
@@ -143,6 +155,11 @@ Module ConstGen
    Public Const INFO_RAW_BLOCK = "Block"
    ' Info per numero lastra nel blocco
    Public Const INFO_RAW_SLABNBR = "SlabNbr"
+   ' Info per identificazione gruppo pezzi
+   Public Const INFO_REFGROUP As String = "RefGroup"
+   Public Const INFO_COUNTERLY As String = "CounterPz"
+   Public Const INFO_PARKIND As String = "ParkInd"
+   Public Const INFO_PARKSTATUS As String = "ParkStatus"
 
    ' Contrassegno di progetto OmagCut
    Public Const NAME_PROJMARK As String = "OmagCut"
@@ -178,6 +195,10 @@ Module ConstGen
    Public Const INFO_TOTAREA As String = "TotArea"
    ' Info per area da produrre dei pezzi del progetto
    Public Const INFO_TOPRODAREA As String = "ToProdArea"
+   ' Info per nome progetti
+   Public Const INFO_PROJNAME As String = "ProjName"
+   ' Info per parcheggio asse C
+   Public Const INFO_CAXESHOME As String = "CAxesHome"
 
    ' Nome layer delle regioni
    Public Const NAME_REGION As String = "Region"
@@ -203,6 +224,11 @@ Module ConstGen
    Public Const INFO_DEPTH As String = "Depth"
    Public Const INFO_WIDTH As String = "Width"
    Public Const INFO_DEPTH2 As String = "Depth2"
+   Public Const INFO_AGG2 As String = "Agg2"
+   Public Const INFO_ROUNDOFF As String = "RoundOff"
+   Public Const INFO_DIRECTCUT As String = "DirectCut"
+   Public Const INFO_STEP_TYPE As String = "StepType"
+   Public Const INFO_ENGR_MILL As String = "EngravingWithMill"
    ' Info in entità da tagliare per taglio ristretto
    Public Const INFO_STRICT As String = "Strict"
    ' Info in entità da tagliare per angolo di lato e tallone
@@ -292,6 +318,18 @@ Module ConstGen
    Public Const INFO_PARTOK As String = "POK"
    ' Info in pezzo per stato rotazione
    Public Const INFO_PARTROT As String = "ROT"
+   ' Info in entità in OutLoop per indicare se è separata WaterJet
+   Public Const INFO_JOINENTITY As String = "JoinEntity"
+   ' Nome layer per "*" indicanti un lato separato nel taglio WaterJet
+   Public Const LAY_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
+   ' Info in OutLoop per punto inizio lavorazione WaterJet
+   Public Const INFO_START As String = "Start"
+   ' Nome dei tagli diretti inseriti in fase di Splitting
+   Public Const NAME_SPLIT_CUT As String = "SplitCut"
+   ' Forzo specifica lavorazione
+   Public Const DEF_MACHINING As String = "Def_Machining"
+   ' Forzo specifica lavorazione solo per tagli con inclinazione
+   Public Const DEF_MACHINING_TILTED As String = "Def_Machining_Tilted"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"
@@ -324,6 +362,21 @@ Module ConstGen
    ' Info in pezzo per facet di ultima superficie selezionata
    Public Const INFO_FRAME_FACET As String = "Facet"
 
+   ' Nome del groppo dei ponticelli per lavorazioni Water
+   Public Const BRIDGES As String = "Bridges"
+   ' Nome dell'entità ponticello contenuta nel gruppo BRIDGES
+   Public Const BRIDGELINE As String = "BridgeLine"
+   ' Info dell'Id pezzo di partenza del ponticello
+   Public Const INFO_BRIDGE_PARTSTART As String = "PartStart"
+   ' Info dell'Id entita' di partenza del ponticello
+   Public Const INFO_BRIDGE_ENTSTART As String = "EntStart"
+   ' Info dell'Id pezzo di arrivo del ponticello
+   Public Const INFO_BRIDGE_PARTEND As String = "PartEnd"
+   ' Info dell'Id entita' di arrivo del ponticello
+   Public Const INFO_BRIDGE_ENTEND As String = "EntEnd"
+   ' Info con la fase di appartenenza del ponticello
+   Public Const INFO_BRIDGE_PHASE As String = "Ph"
+
    ' utensile per le lavorazioni manuali
    Public Const DUMMY_SAW As String = "DummySAW"
    ' lavorazione manuale
@@ -334,6 +387,8 @@ Module ConstGen
    ' Nome di pezzo temporaneo che serve per copia dime
    Public Const NAME_COPYTEMPLATE As String = "CopyTemplate"
 
+   ' Nome layer solidi per VM
+   Public Const NAME_VM_SOLID As String = "Solid"
    ' Chiave per Id originale del pezzo per VeinMatch
    Public Const KEY_ORI_ID As String = "OriId"
 
@@ -343,6 +398,9 @@ Module ConstGen
    ' Lunghezza libera infinita
    Public Const FREELEN_INF = 9999
 
+   ' Costante per lunghezza gambo di lama
+   Public Const STEM = 131072
+
    ' Colori per lavorazioni
    Public Function COL_MCH_CUT() As Color3d
       Return New Color3d(0, 255, 0)
@@ -359,9 +417,18 @@ Module ConstGen
    Public Function COL_MCH_ONFREE() As Color3d
       Return New Color3d(192, 128, 0)
    End Function
+   Public Function COL_MCH_WJ() As Color3d
+      Return New Color3d(0, 128, 128)
+   End Function
+   Public Function COL_MCH_WJ_ANG() As Color3d
+      Return New Color3d(255, 0, 255)
+   End Function
    Public Function COL_MCH_DRIPCUT() As Color3d
       Return New Color3d(255, 0, 165)
    End Function
+   Public Function COL_MCH_ONENGRAVE_ANG() As Color3d
+      Return New Color3d(255, 255, 100)
+   End Function
    Public Function COL_MCH_DRIPFREE() As Color3d
       Return New Color3d(192, 0, 128)
    End Function

Constants/ConstIni.vb

@@ -18,6 +18,8 @@ Module ConstIni
    Public Const S_GENERAL As String = "General"
    Public Const K_DEBUG As String = "Debug"
    Public Const K_LICENCE As String = "Licence"
+   Public Const K_NETKEY As String = "NetKey"
+   Public Const K_LOCKID As String = "LockId"
    Public Const K_MESSAGESDIR As String = "MessagesDir"
    Public Const K_MESSAGES As String = "Messages"
    Public Const K_SUPPORT As String = "Support"
@@ -33,6 +35,7 @@ Module ConstIni
    Public Const K_IMAGEDIR As String = "ImageDir"
    Public Const K_CAMERALINK As String = "CameraLink"
    Public Const K_CNLINK As String = "CNLink"
+   Public Const K_STEPBYSTEPSEND As String = "StepByStepSend"
    Public Const K_TESTINGPAGE As String = "TestingPage"
    Public Const K_SHOWTIPAXES As String = "ShowTipAxes"
    Public Const K_LASTPROJFINISHED As String = "LastProjFinished"
@@ -46,6 +49,16 @@ Module ConstIni
    Public Const K_THEME As String = "Theme"
    Public Const K_MANUAL_CUT As String = "ManualCut"
    Public Const K_TEST As String = "Test"
+   Public Const K_ADD_TAB_BY_PROJ As String = "AdditionalTableByProj"
+   Public Const K_SMARTMACHININGPAGE As String = "SmartMachiningPage"
+   Public Const K_STARTPROGRAM As String = "StartProgram"
+   Public Const K_GENERATECN As String = "GenerateCN"
+   Public Const K_FRACTIONPATTERN As String = "FractionPattern"
+   Public Const K_PRECISION As String = "Precision"
+   Public Const K_QUITDRAWPAGE As String = "QuitDrawPage"
+   Public Const K_SHOWNBARROW As String = "ShowNbArrow"
+   Public Const K_SHOWEXPIREASSITANCE As String = "ShowExpireAssistance"
+   Public Const K_ENABLEDXFPARK As String = "EnableDXFPark"
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"
@@ -79,6 +92,7 @@ Module ConstIni
    Public Const K_TEXMAXLINPIX As String = "TextureMaxLinPixels"
    Public Const K_ZOOMWIN As String = "ZoomWin"
    Public Const K_DISTLINE As String = "DistLine"
+   Public Const K_ORTOGRAPHIC As String = "OrtoGraphic"
 
    Public Const S_ALZFRONT As String = "Alz&Front"
    Public Const K_ALZFRONT As String = "Alz&Front"
@@ -105,6 +119,17 @@ Module ConstIni
    Public Const K_TRFDATA As String = "TrfData"
    Public Const K_CSVDATA As String = "CsvData"
    Public Const K_COMPODIR As String = "CompoDir"
+   Public Const K_CMP_COUNT As String = "Count"
+   Public Const K_LASTCOLOR As String = "LastColor"
+   Public Const K_COLOR As String = "Color"
+
+   Public Const S_FRAMECOMPO As String = "FrameCompo"
+
+   Public Const S_EXTCOMPO As String = "Compo"
+
+   Public Const S_INTCOMPO As String = "InternalCompo"
+   Public Const K_INT_COMPODIR As String = "CompoDir"
+   Public Const K_INT_COUNT As String = "Count"
 
    Public Const S_FLATPARTS As String = "FlatParts"
    Public Const K_FLPCURRDIR As String = "CurrDir"
@@ -120,7 +145,9 @@ Module ConstIni
    Public Const K_ENGRAVENUMBER2 As String = "EngraveNumber2"
    Public Const K_ENGRAVEOFFSET2 As String = "EngraveOffset2"
    Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
+   Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
    Public Const K_ENGRAVESHORT As String = "EngraveShort"
+   Public Const K_ENGRAVEANGLE As String = "EngraveAngle"
    Public Const K_DRIPOFFSET As String = "DripOffset"
    Public Const K_DRIPOFFSET2 As String = "DripOffset2"
    Public Const K_DRIPDEPTH As String = "DripDepth"
@@ -128,6 +155,7 @@ Module ConstIni
    Public Const K_UNDERDRILLDEPTH As String = "UnderDrillDepth"
    Public Const K_FILOTOPOFFSET As String = "FiloTopOffset"
    Public Const K_FILOTOPDEPTH As String = "FiloTopDepth"
+   Public Const K_ROUNDOFF As String = "RoundOff"
 
    Public Const S_NEST As String = "Nest"
    Public Const K_DIRECT As String = "Direct"
@@ -139,6 +167,11 @@ Module ConstIni
    Public Const K_TEXTCOLOR As String = "TextColor"
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
+   Public Const K_DRAG_RECTANGLE As String = "DragRectangle"
+   Public Const K_STARTENDMODIFYONINTCORNER As String = "StartEndModifyOnIntCorner"
+
+   Public Const S_SPLIT As String = "Split"
+   Public Const K_MOVE_LEV As String = "MoveLevel"
 
    Public Const S_CSV As String = "Csv"
    Public Const K_FULL As String = "Full"
@@ -151,6 +184,14 @@ Module ConstIni
    Public Const K_CSVCURRDIR As String = "CurrDir"
    Public Const K_CSVLASTFILE As String = "LastFile"
 
+   Public Const S_TRF As String = "TRF"
+   Public Const K_ORDCODE As String = "OrdCode"
+   Public Const K_ORDDESC As String = "OrdDesc"
+   Public Const K_PARTCODE As String = "PartCode"
+   Public Const K_MATCODE As String = "MatCode"
+   Public Const K_SURFCODE As String = "SurfCode"
+   Public Const K_TRFTHICKNESS As String = "TrfThickness"
+
    Public Const S_SLABDXF As String = "SlabDxf"
    Public Const K_IMPORTSLABDXF As String = "ImportSlabDxf"
    Public Const K_SLABLAYER As String = "SlabLayer"
@@ -172,6 +213,8 @@ Module ConstIni
    Public Const K_OFFSZ As String = "OffsZ"
    Public Const K_OFFSXY As String = "OffsXY"
    Public Const K_OFFSYY As String = "OffsYY"
+   Public Const K_OFFSXINTERY As String = "OffsYInterY"
+   Public Const K_OFFSXINTERYSAWTH As String = "OffsYInterYSawTh"
    Public Const K_STARTTRIM As String = "StartTrim"
    Public Const K_ENDTRIM As String = "EndTrim"
    Public Const K_OTHERSIDE As String = "OtherSide"
@@ -191,28 +234,39 @@ Module ConstIni
    Public Const K_RAWOFFSX As String = "OffsX"
    Public Const K_RAWOFFSY As String = "OffsY"
    Public Const K_RAWKERF As String = "Kerf"
+   Public Const K_ENABLEOTHERREFTAB As String = "EnableOtherRefTab"
+   Public Const K_OTHERREFTAB As String = "OtherRefTab"
+   Public Const K_OTHERREFTABX As String = "OtherRefTabX"
+   Public Const K_OTHERREFTABY As String = "OtherRefTabY"
+   Public Const K_OTHERREFTABPOS As String = "OtherRefTabPos"
+   Public Const K_REFTAB As String = "RefTab"
+   Public Const K_CURRENTREFTAB As String = "CurrRefTab"
 
    Public Const S_RAWMOVE As String = "RawMove"
    Public Const K_RAWSTEP As String = "Step"
+   Public Const K_EXTRASTEP As String = "ExtraStep"
    Public Const K_RAWROTATION As String = "Rotation"
    Public Const K_PERPENDICULAR As String = "Perpendicular"
 
+   Public Const S_SCRAPS As String = "Scraps"
+   Public Const K_ENABLESCRAPS As String = "EnableScraps"
+   Public Const K_PHOTODIR As String = "PhotoDir"
+   Public Const K_LASTBLOCK As String = "LastBlock"
+   Public Const K_TEMPLATE As String = "Template"
+   Public Const K_DAT As String = "Dat"
+   Public Const K_ZEBRAUTILITIES As String = "ZebraUtilities"
+   Public Const K_ENABLE_PRINTER As String = "EnablePrinter"
+
    Public Const S_REG As String = "Reg"
    Public Const K_REGSTEP As String = "Step"
    Public Const K_REGANGSTEP As String = "AngStep"
 
    Public Const S_CAMERA As String = "Camera"
-   Public Const K_CAM_COUNT As String = "Count"
    Public Const K_CAM_EXEPATH As String = "ExePath"
    Public Const K_CAM_IMAGE As String = "Image"
    Public Const K_CAM_INFO As String = "Info"
    Public Const K_CAM_RESULT As String = "Result"
    Public Const K_CAM_CONTOUR As String = "Contour"
-   Public Const K_CAM_EXEPATH2 As String = "ExePath2"
-   Public Const K_CAM_IMAGE2 As String = "Image2"
-   Public Const K_CAM_INFO2 As String = "Info2"
-   Public Const K_CAM_RESULT2 As String = "Result2"
-   Public Const K_CAM_CONTOUR2 As String = "Contour2"
    Public Const K_CAM_THRESHOLD As String = "Threshold"
    Public Const K_CAM_TOLERANCE As String = "Tolerance"
    Public Const K_CAM_TIMEOUT As String = "Timeout"
@@ -225,6 +279,7 @@ Module ConstIni
    Public Const K_MACHINESDIR As String = "MachinesDir"
    Public Const K_TOOLMAKERSDIR As String = "ToolMakersDir"
    Public Const K_CURRMACH As String = "CurrMach"
+   Public Const K_ENABLEFINALSAWCUT As String = "EnableFinalSawCut"
 
    Public Const S_SIMUL As String = "Simul"
    Public Const K_SLIDERX As String = "SliderX"
@@ -236,6 +291,8 @@ Module ConstIni
    Public Const S_VEINMATCHING As String = "VeinMatching"
    Public Const K_VEINMA_ENABLE As String = "Enable"
    Public Const K_VEINMA_PLACE As String = "WinPlace"
+   Public Const K_VEINMA_WIDTH As String = "Width"
+   Public Const K_VEINMA_HEIGHT As String = "Height"
 
    Public Const S_FASTGRID As String = "FastGrid"
    Public Const K_FG_ENABLE As String = "FGEnable"
@@ -282,6 +339,7 @@ Module ConstIni
    Public Const K_DC_FLATT_HEADSIDE As String = "FlattHeadSide"
    Public Const K_DC_FLATT_MACHTYPE As String = "FlattMachType"
    Public Const K_DC_FLATT_ROTLOCK As String = "FlattRotLock"
+   Public Const K_DC_FLAT_CHAINEDPATH As String = "ChainedPath"
    Public Const K_DC_FLATT_POSX As String = "FlattPosX"
    Public Const K_DC_FLATT_POSY As String = "FlattPosY"
    Public Const K_DC_POLISH_NAME As String = "PolishName"
@@ -289,6 +347,12 @@ Module ConstIni
    Public Const K_DC_TEST_LENGTH As String = "TestLength"
    Public Const K_DC_TEST_ANGH As String = "TestAngH"
    Public Const K_DC_TEST_OFFSET As String = "TestOffset"
+   Public Const K_DC_OFFSET_SQUARING As String = "OffsetSquaring"
+   Public Const K_DC_EXTRA_LEN_SQUARING As String = "ExtraLenSquaring"
+   Public Const K_ENABLEINVERT As String = "EnableInvert"
+   Public Const K_ENABLECUSTOMGRID As String = "EnableCustomGrid"
+   Public Const K_GRIDNUMDIMXCUSTOM As String = "GridNumDimXCustom"
+   Public Const K_GRIDNUMDIMYCUSTOM As String = "GridNumDimYCustom"
 
    Public Const S_STATDATA As String = "StatData"
    Public Const K_SD_DAY As String = "Day"

Constants/ConstKitData.vb

@@ -11,9 +11,18 @@
    Public Const K_ZIGZAGX As String = "ZigZagX"
    Public Const K_OFFZIGZAGX As String = "OffZigZagX"
    Public Const K_STEPX As String = "StepX"
+   Public Const K_RADIUSX As String = "RadiusX"
+   Public Const K_DISTANCEX As String = "DistanceX"
    Public Const K_ZIGZAGY As String = "ZigZagY"
    Public Const K_OFFZIGZAGY As String = "OffZigZagY"
    Public Const K_STEPY As String = "StepY"
+   Public Const K_RADIUSY As String = "RadiusY"
+   Public Const K_DISTANCEY As String = "DistanceY"
+   Public Const K_SPIRAL As String = "Spiral"
+   Public Const K_OFFSPIRAL As String = "OffSpiral"
+   Public Const K_STEPSPIRAL As String = "StepSpiral"
+   Public Const K_RADIUSSPIRAL As String = "RadiusSpiral"
+   Public Const K_DISTANCESPIRAL As String = "DistanceSpiral"
    Public Const K_LILEN As String = "LiLen"
    Public Const K_LIHEIGHT As String = "LiHeight"
    Public Const K_LILOAD As String = "LiLoad"

Constants/ConstMachIni.vb

@@ -2,50 +2,84 @@
 
    Public Const S_NUMERICALCONTROL As String = "NumericalControl"
    Public Const K_TYPE As String = "Type"
+   Public Const K_SPECIALSEND As String = "SpecialSend"
+   Public Const K_SPECIALAREAS As String = "SpecialAreas"
+   Public Const K_SPECIALDEST As String = "SpecialDest"
+   Public Const K_SPECIALEXEC As String = "SpecialExec"
 
    Public Const S_PARTPROGRAM As String = "PartProgram"
    Public Const K_EXTENSION As String = "Extension"
+   Public Const K_EXTFILECN As String = "ExtFileCN"
 
    Public Const S_AXES As String = "Axes"
    Public Const K_AXESNUM As String = "AxesNum"
    Public Const K_SIMULATIONAXESNUM As String = "SimulationAxesNum"
    Public Const K_L1NAME As String = "L1Name"
    Public Const K_L1ID As String = "L1Id"
+   Public Const K_L1TYPE As String = "L1Type"
    Public Const K_L2NAME As String = "L2Name"
    Public Const K_L2ID As String = "L2Id"
+   Public Const K_L2TYPE As String = "L2Type"
    Public Const K_L3NAME As String = "L3Name"
    Public Const K_L3ID As String = "L3Id"
+   Public Const K_L3TYPE As String = "L3Type"
    Public Const K_R1NAME As String = "R1Name"
    Public Const K_R1ID As String = "R1Id"
+   Public Const K_R1TYPE As String = "R1Type"
    Public Const K_R2NAME As String = "R2Name"
    Public Const K_R2ID As String = "R2Id"
+   Public Const K_R2TYPE As String = "R2Type"
    Public Const K_A6NAME As String = "A6Name"
    Public Const K_A6ID As String = "A6Id"
+   Public Const K_A6TYPE As String = "A6Type"
    Public Const K_A7NAME As String = "A7Name"
    Public Const K_A7ID As String = "A7Id"
+   Public Const K_A7TYPE As String = "A7Type"
    Public Const K_A8NAME As String = "A8Name"
    Public Const K_A8ID As String = "A8Id"
+   Public Const K_A8TYPE As String = "A8Type"
    Public Const K_A9NAME As String = "A9Name"
    Public Const K_A9ID As String = "A9Id"
+   Public Const K_A9TYPE As String = "A9Type"
    Public Const K_A10NAME As String = "A10Name"
    Public Const K_A10ID As String = "A10Id"
+   Public Const K_A10TYPE As String = "A10Type"
    Public Const K_DELTA_C As String = "DeltaC"
    Public Const K_ININCHES As String = "InInches"
+   Public Const K_CPOS As String = "CPos"
 
    Public Const S_NCSIEMENS As String = "NcSiemens"
    Public Const K_COMM_NAME As String = "CommName"
    Public Const K_PATH_HMI As String = "PathHmi"
    Public Const K_USENEWMDI As String = "UseNewMDI"
    Public Const K_ISSIEMENSONE As String = "IsSiemensOne"
+   Public Const K_ISACTIVEMODESUBSCR As String = "IsActiveModeSubscr"
    Public Const K_DBVARPATH As String = "DBVarPath"
+   Public Const K_NEWWRITECNCMODE As String = "NewWriteCNCMode"
 
    Public Const S_NCNUM As String = "NcNUM"
    Public Const K_RESETSENDDELAY As String = "ResetSendDelay"
    Public Const K_THREADSLEEP As String = "ThreadSleep"
+   Public Const K_PHOTODELEY As String = "PhotoDeley"
+
+   Public Const S_NCFANUC As String = "NcFanuc"
+   Public Const K_SETNCMODE As String = "SetNcMode"
+   Public Const K_BASEADDRINT As String = "BaseAddrInt"
+   Public Const K_BASEADDRBIT As String = "BaseAddrBit"
+   Public Const K_NUMVARINT As String = "NumVarInt"
+   Public Const K_NUMVARBIT As String = "NumVarBit"
+
+   Public Const S_EXECLUA As String = "ExecLua"
+   Public Const K_FILESCRIPT_LUA As String = "FileScript"
+
+   Public Const S_CAMERAHQ As String = "CameraHQ"
+   Public Const K_CAMERAHQ_ENABLE As String = "EnableHQ"
+   Public Const K_CAMERAHQ_ACTIVATE As String = "ActivateHQ"
 
    Public Const S_NCDATA As String = "NcData"
    Public Const K_NEWVARIABLE As String = "NewVariable"
    Public Const K_NEWCONSOLE As String = "NewConsole"
+   Public Const K_WRITECNCMODEVAR As String = "WriteCNCModeVar"
    Public Const K_COMM As String = "Comm"
    Public Const K_REFRESH As String = "Refresh"
    Public Const K_MODE As String = "Mode"
@@ -71,9 +105,16 @@
    Public Const K_TABLEDOWN As String = "TableDown"
    Public Const K_MANUAL As String = "Manual"
    Public Const K_DOORCLOSED As String = "DoorClosed"
+   Public Const K_DOOROPENDED As String = "DoorOpened"
    Public Const K_LIMITZ As String = "LimitZ"
    Public Const K_POWEROVR As String = "PowerOvr"
+   Public Const K_PARKING As String = "Parking"
+   Public Const K_ENABLEZONE As String = "EnableZone"
+   Public Const K_ENABLEPC As String = "EnablePC"
    Public Const K_HSM As String = "Hsm"
+   Public Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Public Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
+   Public Const BTN_ENABLE_PC As String = "EnablePC"
    Public Const K_VACUUMUP As String = "VacuumUp"
    Public Const K_VACUUMDOWN As String = "VacuumDown"
    Public Const K_VACUUM2UP As String = "Vacuum2Up"
@@ -100,6 +141,11 @@
    Public Const K_VACUUMOFF As String = "VacuumOff"
    Public Const K_BYPASSTATE As String = "BypassState"
    Public Const K_FEEDHOLD As String = "FeedHold"
+   Public Const K_SPOTLIGHT As String = "SpotLight"
+   Public Const K_SPOTLIGHT1 As String = "SpotLight1"
+   Public Const K_SPOTLIGHT2 As String = "SpotLight2"
+   Public Const K_NAXES As String = "nAxes"
+   Public Const K_RESETSTATUS As String = "ResetStatus"
    ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
    Public Const K_XYJOG As String = "XYJog"
@@ -107,6 +153,7 @@
    Public Const K_ZBJOG As String = "ZBJog"
    Public Const K_POWERON As String = "PowerON"
    Public Const K_POWEROFF As String = "PowerOFF"
+   Public Const K_REMOTE As String = "Remote"
 
    Public Const S_PRODUCTIONLINE As String = "ProductionLine"
    Public Const K_ACTIVE As String = "Active"
@@ -129,6 +176,10 @@
    Public Const K_PRODLIPROBINGTCPOS2VAR As String = "ProbingTcPos2Var"
    Public Const K_PRODLISAWDIAMETER2VAR As String = "SawDiameter2Var"
 
+   Public Const S_POLISHLINE As String = "PolishLine"
+   Public Const K_CLICKSTATE As String = "ClickState"
+   Public Const k_CLICKDIR As String = "ClickDir"
+
    Public Const S_STATISTICS As String = "Stats"
    Public Const K_DATADIR As String = "DataDir"
    Public Const K_SHOWAREAS As String = "ShowAreas"
@@ -137,14 +188,30 @@
    Public Const K_ADDITIONALTABLE As String = "AdditionalTable"
    Public Const K_TAB2_ADDITIONALTABLE As String = "Tab2AdditionalTable"
    Public Const K_TAB3_ADDITIONALTABLE As String = "Tab3AdditionalTable"
+   Public Const K_TAB4_ADDITIONALTABLE As String = "Tab4AdditionalTable"
    Public Const K_CENTER_RAW_ONX As String = "CenterRawOnX"
    Public Const K_CHANGETABWD As String = "ChangeTabWD"
+   Public Const K_ALLTABORIGTAB1 As String = "AllTabOrigTab1"
+   Public Const K_TABX As String = "TabX"
+   Public Const K_TABY As String = "TabY"
+   Public Const K_USELASERORIGIN As String = "UseLaserOrigin"
 
    Public Const S_PHOTO As String = "Photo"
+   Public Const K_PHOTO_CAMERACOUNTER As String = "CameraCounter"
    Public Const K_PHOTO_OFFSETX As String = "OffsetX"
    Public Const K_PHOTO_OFFSETY As String = "OffsetY"
    Public Const K_PHOTO_TAB2_OFFSETX As String = "Tab2OffsetX"
    Public Const K_PHOTO_TAB2_OFFSETY As String = "Tab2OffsetY"
+   Public Const K_PHOTO_TAB3_OFFSETX As String = "Tab3OffsetX"
+   Public Const K_PHOTO_TAB3_OFFSETY As String = "Tab3OffsetY"
+   Public Const K_PHOTO_TAB4_OFFSETX As String = "Tab4OffsetX"
+   Public Const K_PHOTO_TAB4_OFFSETY As String = "Tab4OffsetY"
+   Public Const K_PHOTO_HQ_OFFSETX As String = "HQOffsetX"
+   Public Const K_PHOTO_HQ_OFFSETY As String = "HQOffsetY"
+   Public Const K_CAMERA_DIRECT_CMD As String = "CameraDirectCmd"
+   Public Const K_CAMERA_STATE_VAR As String = "CameraStateVar"
+   Public Const K_ENABLE_GOHOME_FOR_PHOTO As String = "EnableGoHomeForPhoto"
+   Public Const K_PENDIG_TIME_FOR_PHOTO As String = "PendigTimeForPhoto"
 
    Public Const S_TOOLS As String = "Tools"
    Public Const K_DRILLBIT As String = "Drillbit"
@@ -194,8 +261,11 @@
    Public Const K_MACH_MILLING_ON_SINKS As String = "MillingOnSinks"
    Public Const K_MACH_MILLING_SHORTENING As String = "MillingShortening"
    Public Const K_MACH_ENGRAVING_WITHMILL As String = "EngravingWithMill"
+   Public Const K_MACH_STARTCENTERTOOLPATH As String = "StartCenterToolPath"
    Public Const K_MACH_ENGRAVING_DEPTH As String = "EngravingDepth"
    Public Const K_MACH_ENGRAVING_WIDTH As String = "EngravingWidth"
+   Public Const K_MACH_WATERJET_OPTIMIZE As String = "WjOptimize"
+   Public Const K_MACH_WATERJET_ON_SINKS As String = "WjOnSinks"
    Public Const K_MACH_NEST_ALIGNED As String = "Aligned"
    Public Const K_MACH_NEST_GHIGLIOTTINA As String = "Guillotine"
    Public Const K_MACH_WASHING As String = "Washing"
@@ -205,11 +275,8 @@
    Public Const K_MACH_CUTFSEVENABLE As String = "CutFsevEnable"
    Public Const K_MACH_CUTFSEVLEN As String = "CutFsevLen"
    Public Const K_MACH_CUTFSEVPERC As String = "CutFsevPerc"
-   ' DrillMillC90
-   ' CutLongDxSx
-   ' AngRotMultiCut
-   ' MinDistHeadsMultiCut
-   ' MinSawRbHeight
+   Public Const K_MACH_DRILL_MILL_C90 As String = "DrillMillC90"
+   Public Const K_USEBAXISLOCK As String = "UseBAxisLock"
 
    Public Const S_MACH_FRAME As String = "Frame"
    Public Const K_MACH_PAUSE As String = "Pause"
@@ -217,6 +284,13 @@
    Public Const S_MACH_RAWMOVE As String = "RawMove"
    Public Const K_MACH_RM_ROTATE As String = "Rotate"
    Public Const K_MACH_RM_FINALMOVE As String = "FinalMove"
+   Public Const K_MACH_WEIGHT_SINGLEPLUGGER As String = "MaxWeightSinglePlugger"
+   Public Const K_MACH_WEIGHT_DOUBLEPLUGGER As String = "MaxWeightDoublePlugger"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEY As String = "RotateVacuumForExtraStrokeY"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEX As String = "RotateVacuumForExtraStrokeX"
+
+   Public Const K_ISNEWSCRAPS As String = "IsNewScraps"
+   Public Const K_DATABASEID As String = "DatabaseID"
 
    Public Const S_MACH_REG As String = "Reg"
    Public Const K_MACH_MAX_ROT_ANG As String = "MaxRotAng"
@@ -240,10 +314,12 @@
 
    Public Const S_MACH_INPROGRESS As String = "InProgress"
    Public Const K_PHASEVAR As String = "PhaseVar"
+   Public Const K_WP_STEPTIME As String = "WPStepTime"
 
    Public Const S_MACH_PROBING As String = "Probing"
    Public Const K_PROBINGSTATEVAR As String = "ProbingStateVar"
    Public Const K_SAWDIAMETER As String = "SawDiameter"
+   Public Const K_TOOLLENGTH As String = "ToolLength"
    Public Const K_RAWTHICKNESS As String = "RawThickness"
    Public Const K_ENABLERAWPROBE As String = "EnableRawProbe"
 
@@ -255,6 +331,7 @@
 
    Public Const S_MACH_MACH As String = "Mach"
    Public Const K_CURRSAW As String = "CurrSaw"
+   Public Const K_CURRSAWTILTED As String = "CurrSawTilted"
    Public Const K_CURRDRILL As String = "CurrDrill"
    Public Const K_CURRMILL As String = "CurrMill"
    Public Const K_CURRMILLNOTIP As String = "CurrMillNoTip"
@@ -262,6 +339,8 @@
    Public Const K_CURRDRIPDRILL As String = "CurrDripDrill"
    Public Const K_CURRWATERJET As String = "CurrWaterJet"
    Public Const K_CURRSAWING As String = "CurrSawing"
+   Public Const K_CURRSAWINGTILTED As String = "CurrSawingTilted"
+   Public Const K_APPLYSAWINGTILTED As String = "ApplySawingTilted"
    Public Const K_CURRDRILLING As String = "CurrDrilling"
    Public Const K_CURRMILLING As String = "CurrMilling"
    Public Const K_CURRPOCKETING As String = "CurrPocketing"
@@ -272,9 +351,12 @@
    Public Const K_CURRDRIPSAWING As String = "CurrDripSawing"
    Public Const K_CURRDRIPDRILLING As String = "CurrDripDrilling"
    Public Const K_CURRWATERJETTING As String = "CurrWaterJetting"
+   Public Const K_CURRWATERJETTINGQUALITY As String = "CurrWaterJettingQualilty"
 
    Public Const S_MATERIALS As String = "Materials"
    Public Const K_CURRMATERIAL As String = "CurrMaterial"
    Public Const K_MATERIAL As String = "Material"
+   Public Const K_FROMDBWATERJET As String = "FromDBWaterJet"
+   Public Const K_AVERAGEDENSITY As String = "AverageDensity"
 
 End Module

DirectCuts/ControlsDirectCutUC.xaml

@@ -0,0 +1,177 @@
+<UserControl x:Class="ControlsDirectCutUC"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             DataContext="Self"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:OmagCUT="clr-namespace:OmagCUT"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
+
+   <Grid Name="LeftButtonGrid" Grid.Row="1" >
+      <Grid.RowDefinitions>
+         <!--<RowDefinition Height="1*"/>
+            <RowDefinition Height="7*"/>-->
+         <RowDefinition Height="9*"/>
+      </Grid.RowDefinitions>
+      <!-- Definizione della Grid laterale -->
+      <Grid Name="CutTypeGrid" Grid.Row="1" >
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <!--<RowDefinition Height="1*"/>-->
+         </Grid.RowDefinitions>
+         <Button Name="ManualBtn" Grid.Column="2" Grid.Row="0"                    
+                 Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Movimento-manualeImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="ManualTxt" Grid.Column="1"
+                          Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="SingleCutBtn" Grid.Row="1"
+                 Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-singoloImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SingleCutTxt" Grid.Column="1"
+                          Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="MultipleCutBtn" Grid.Row="2"
+                 Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-multiploImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="MultipleCutTxt" Grid.Column="1"
+                          Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="GridCutBtn" Grid.Row="3"
+                 Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-grigliaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="GridCutTxt" Grid.Column="1"
+                          Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+
+         <Button Name="SingleDrillBtn" Grid.Row="4"
+                 Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Foro-singoloImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SingleDrillTxt" Grid.Column="1"
+                          Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="FlatteningCutBtn" Grid.Row="5"
+                 Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource SpianaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="FlatteningCutTxt" Grid.Column="1"
+                          Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <!--<Button Name="PolishingBtn" Grid.Row="6"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="PolishingTxt" Grid.Column="1"
+                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>-->
+
+         <!--<Button Name="CopyTemplateBtn" Grid.Row="7"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>-->
+
+         <Button Name="SquaringBtn" Grid.Row="6"
+                 Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SquaringTxt" Grid.Column="1"
+                          Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <!--<Button Name="SawTestBtn" Grid.Row="6"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="80"/>
+                        <ColumnDefinition Width="140"/>
+                    </Grid.ColumnDefinitions>
+                    <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                    <TextBlock Name="SawTestTxt" Grid.Column="1"
+                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                </Grid>
+            </Button>-->
+
+         <Grid Name="ChangeUCGrid" Grid.Row="7">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="ChangeUCBtn" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Grid>
+                  <!--<Image Name="ImageCompo9" Source="{DynamicResource NumericKeyboardArrowImg}" />-->
+                  <TextBlock Name="ChangeUCTxBl" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+               </Grid>
+            </Button>
+         </Grid>
+
+      </Grid>
+   </Grid>
+</UserControl>

DirectCuts/ControlsDirectCutUC.xaml.vb

@@ -0,0 +1,258 @@
+Imports EgtUILib
+
+Public Class ControlsDirectCutUC
+
+   ' Dichiarazione delle Page UserControl
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Friend m_MachineButtons As MachineButtonsUC
+   Friend m_ManualAxesMove As ManualAxesMoveUC
+   Friend m_SingleCutAuto As SingleCutAuto
+   Friend m_SingleCut As SingleCutUC
+   Friend m_SingleDrill As SingleDrillUC
+   Friend m_MultipleCut As MultipleCut
+   Friend m_GridCut As GridCut
+   Friend m_FlatteningCut As FlatteningCut
+   Friend m_Squaring As SquaringUC
+   Friend m_ControlsMachineButton As ControlsMachineButtonUC
+   Friend m_VacuumMachineButton As VacuumMachineButtonUC
+
+   Friend m_ControlDirectCutPage1 As ControlsDirectCutUC1
+
+   ' Stato di visualizzazione della macchina
+   Friend m_bShowMachine As Boolean = False
+   Friend m_nMachLook As Integer = MCH_LOOK.ALL
+   ' Dati generali CN
+   Friend m_CN As CN_generico
+   Private m_bFirst As Boolean = True
+   ' Riferimento alla pagina correntemente attiva
+   Friend m_ActiveDirectCutPage As DirectCutPages = DirectCutPages.DirectCut
+   ' Variabili che indicano attivazione paginette con bottoni macchina
+   Private m_ControlsBtn_IsActive As Boolean
+
+   Public Shared m_dZSafe As Double = 52
+
+   ' Variabile che indica se sono attivi i bottoni macchina nuovi o vecchi
+   Friend m_NewMachineButtonsType As Boolean
+   ' Indica che la finestra del talio Singolo deve essere di tipo manuale
+   Friend m_bManualCut As Boolean = False
+
+   ' elenco dei nuovi bottoni
+   Private m_ButtonJogList As New List(Of MachineButton)
+
+   Enum DirectCutPages
+      ' pagina principale di tagli diretti
+      DirectCut
+      ' nuova pagina di tagli diretti
+      DirectCut1
+      ' elenco dei comandi associati
+      ManualAxesMove
+      SingleCut
+      MultipleCut
+      GridCut
+      FlatteningCut
+      Polishing
+      CopyTemplate
+      SingleCutAuto
+      SingleDrill
+      Squaring
+   End Enum
+
+   Private Sub ControlsDirectCutUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+
+      ' leggo la configurazione del programma per i nuovi tagli manuali
+      m_bManualCut = ( GetPrivateProfileInt(S_GENERAL, K_MANUAL_CUT, 0, m_MainWindow.GetIniFile()) <> 0)
+
+      ' Creazione delle Page UserControl
+      m_MachineButtons = New MachineButtonsUC
+      m_ManualAxesMove = New ManualAxesMoveUC
+      m_SingleCut = New SingleCutUC
+      m_SingleCutAuto = New SingleCutAuto
+      m_SingleDrill = New SingleDrillUC
+      m_MultipleCut = New MultipleCut
+      m_GridCut = New GridCut
+      m_FlatteningCut = New FlatteningCut
+      m_Squaring = New SquaringUC
+      m_ControlsMachineButton = New ControlsMachineButtonUC
+      m_VacuumMachineButton = New VacuumMachineButtonUC
+      ' Riferimento alla pagina succesiva
+      m_ControlDirectCutPage1 = New ControlsDirectCutUC1
+
+      ' Posizionemento nella griglia delle Page UserControl DirectCutPageUC
+      m_MachineButtons.SetValue(Grid.RowProperty, 2)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 7)
+      m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
+      If m_bManualCut Then
+         m_SingleCutAuto.SetValue(Grid.RowProperty, 1)
+      Else
+         m_SingleCut.SetValue(Grid.RowProperty, 1)
+      End If
+      m_SingleDrill.SetValue(Grid.RowProperty, 1)
+      m_MultipleCut.SetValue(Grid.RowProperty, 1)
+      m_GridCut.SetValue(Grid.RowProperty, 1)
+      m_FlatteningCut.SetValue(Grid.RowProperty, 1)
+      m_Squaring.SetValue(Grid.RowProperty, 1)
+      m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
+      m_VacuumMachineButton.SetValue(Grid.RowProperty, 1)
+
+      ManualTxt.Text = EgtMsg(90201)         ' Movimento manuale
+      SingleCutTxt.Text = EgtMsg(90202)      ' Taglio singolo
+      SingleDrillTxt.Text = EgtMsg(90258)    ' Foro singolo
+      MultipleCutTxt.Text = EgtMsg(90203)    ' Taglio multiplo
+      GridCutTxt.Text = EgtMsg(90204)        ' Taglio griglia
+      FlatteningCutTxt.Text = EgtMsg(90206)  ' Spianatura
+      SquaringTxt.Text = EgtMsg(90261)       ' Squadratura
+      ChangeUCTxBl.Text = EgtMsg(90409)      ' Altri
+
+   End Sub
+
+   Private Sub ControlsDirectCutUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      ' Se rientro da simulazione
+      If m_ActiveDirectCutPage = DirectCutPages.SingleCut Then
+         LeftButtonGrid.Children.Add(m_SingleCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto Then
+         LeftButtonGrid.Children.Add(m_SingleCutAuto)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.MultipleCut Then
+         LeftButtonGrid.Children.Add(m_MultipleCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.GridCut Then
+         LeftButtonGrid.Children.Add(m_GridCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.FlatteningCut Then
+         LeftButtonGrid.Children.Add(m_FlatteningCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleDrill Then
+         LeftButtonGrid.Children.Add(m_SingleDrill)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.Squaring Then
+         LeftButtonGrid.Children.Add(m_Squaring)
+         Return
+      End If
+
+      If m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.MachineButtonUC Or
+         m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.VacuumButtonUC Then
+         ' Caso standard
+         m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      End If
+
+      ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
+      Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
+      Dim bH1Exists As Boolean = m_MainWindow.m_CurrentMachine.ExistsSawHead()
+
+      ManualBtn.IsEnabled = bH1Exists
+      ' sviluppo rimasto in sospeso
+      If m_bManualCut Then
+         ' anche se non è presente un grezzo mantengo abilitato il bottone
+         SingleCutBtn.IsEnabled = True
+      Else
+         SingleCutBtn.IsEnabled = bRawOk
+      End If
+      MultipleCutBtn.IsEnabled = bRawOk
+      GridCutBtn.IsEnabled = bRawOk
+      SingleDrillBtn.IsEnabled = (bRawOk And bH1Exists)
+      FlatteningCutBtn.IsEnabled = (bRawOk And bH1Exists)
+      SquaringBtn.IsEnabled = bRawOk
+
+      ' aggiorno la visualizzazione dei parametri
+      ReloadParam()
+
+      ' Nascondo i pezzi in parcheggio
+      HideParkedParts()
+      EgtZoom(ZM.ALL)
+
+   End Sub
+
+   ' ricarico i parametri utensili per definizione 
+   Public Sub ReloadParam()
+      Dim sCurrSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sCurrSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim bSaw As Boolean = False
+
+      ' se esiste una lavorazione di lama corrente vuol dire che deve essere preferita
+      If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
+         bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
+      End If
+      If Not bSaw Then
+         EgtOutLog(" WARNING! Impossible to get point from SAW, there isn't SAW or SAWING! It's available only by DRAW")
+      End If
+      m_SingleCut.SetEnableParam(bSaw)
+      m_MultipleCut.SetEnableParam(bSaw)
+      m_GridCut.SetEnableParam(bSaw)
+   End Sub
+
+#Region "COMMAND CLICK BTN"
+
+   Private Sub ManualBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualBtn.Click
+      LeftButtonGrid.Children.Add(m_ManualAxesMove)
+      m_ActiveDirectCutPage = DirectCutPages.ManualAxesMove
+   End Sub
+
+   Private Sub SingleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleCutBtn.Click
+      If m_bManualCut Then
+         LeftButtonGrid.Children.Add(m_SingleCutAuto)
+         m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto
+      Else
+         LeftButtonGrid.Children.Add(m_SingleCut)
+         m_ActiveDirectCutPage = DirectCutPages.SingleCut
+      End If
+
+   End Sub
+
+   Private Sub MultipleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles MultipleCutBtn.Click
+      LeftButtonGrid.Children.Add(m_MultipleCut)
+      m_ActiveDirectCutPage = DirectCutPages.MultipleCut
+   End Sub
+
+   Private Sub GridCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles GridCutBtn.Click
+      LeftButtonGrid.Children.Add(m_GridCut)
+      m_ActiveDirectCutPage = DirectCutPages.GridCut
+   End Sub
+
+   Private Sub FlatteningCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles FlatteningCutBtn.Click
+      LeftButtonGrid.Children.Add(m_FlatteningCut)
+      m_ActiveDirectCutPage = DirectCutPages.FlatteningCut
+   End Sub
+
+   Private Sub SquaringBtn_Click(sender As Object, e As RoutedEventArgs) Handles SquaringBtn.Click
+      LeftButtonGrid.Children.Add(m_Squaring)
+      m_ActiveDirectCutPage = DirectCutPages.Squaring
+   End Sub
+
+   Private Sub SingleDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleDrillBtn.Click
+      LeftButtonGrid.Children.Add(m_SingleDrill)
+      m_ActiveDirectCutPage = DirectCutPages.SingleDrill
+   End Sub
+
+   ' cambio pagina
+   Private Sub ChangeUCBtn_Click(sender As Object, e As RoutedEventArgs) Handles ChangeUCBtn.Click
+      DirectCutPage_Unloaded(Nothing, Nothing)
+      m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      m_MainWindow.m_DirectCutPageUC.LoadDirectCutUC1()
+   End Sub
+
+#End Region    ' Command Click Btn
+
+
+   Friend Sub DirectCutPage_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      Select Case m_ActiveDirectCutPage
+         Case DirectCutPages.DirectCut Or DirectCutPages.ManualAxesMove
+            ' Non è necessario fare alcunché
+         Case DirectCutPages.SingleCut
+            LeftButtonGrid.Children.Remove(m_SingleCut)
+         Case DirectCutPages.SingleCutAuto
+            LeftButtonGrid.Children.Remove(m_SingleCutAuto)
+         Case DirectCutPages.MultipleCut
+            LeftButtonGrid.Children.Remove(m_MultipleCut)
+         Case DirectCutPages.GridCut
+            LeftButtonGrid.Children.Remove(m_GridCut)
+         Case DirectCutPages.FlatteningCut
+            LeftButtonGrid.Children.Remove(m_FlatteningCut)
+         Case DirectCutPages.SingleDrill
+            LeftButtonGrid.Children.Remove(m_SingleDrill)
+         Case DirectCutPages.Squaring
+            LeftButtonGrid.Children.Remove(m_Squaring)
+      End Select
+   End Sub
+
+End Class

DirectCuts/ControlsDirectCutUC1.xaml

@@ -0,0 +1,86 @@
+<UserControl x:Class="ControlsDirectCutUC1"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             DataContext="Self"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:OmagCUT="clr-namespace:OmagCUT"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
+
+   <Grid Name="LeftButtonGrid" Grid.Row="1" >
+      <Grid.RowDefinitions>
+         <!--<RowDefinition Height="1*"/>
+            <RowDefinition Height="7*"/>-->
+         <RowDefinition Height="9*"/>
+      </Grid.RowDefinitions>
+      <!-- Definizione della Grid laterale -->
+      <Grid Name="CutTypeGrid" Grid.Row="1" >
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <!--<RowDefinition Height="1*"/>-->
+         </Grid.RowDefinitions>
+
+         <Button Name="SawTestBtn" Grid.Row="0"
+                 Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SawTestTxt" Grid.Column="1"
+                          Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="PolishingBtn" Grid.Row="1"
+                 Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="PolishingTxt" Grid.Column="1"
+                          Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="CopyTemplateBtn" Grid.Row="2"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                          Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Grid Name="ChangeUC1Grid" Grid.Row="7">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="ChangeUC1Btn" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Grid>
+                  <Image Name="ImageCompo9" Source="{DynamicResource NumericKeyboardArrowImg}" />
+                  <!--<TextBlock Name="LabelCompo9" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>-->
+               </Grid>
+            </Button>
+         </Grid>
+
+      </Grid>
+   </Grid>
+</UserControl>

DirectCuts/ControlsDirectCutUC1.xaml.vb

@@ -0,0 +1,146 @@
+Imports EgtUILib
+
+Public Class ControlsDirectCutUC1
+
+   ' Dichiarazione delle Page UserControl
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Friend m_Polishing As Polishing
+   Friend m_CopyTemplate As CopyTemplateUC
+   Friend m_SawTest As SawTestUC
+
+   ' Stato di visualizzazione della macchina
+   Friend m_bShowMachine As Boolean = False
+   Friend m_nMachLook As Integer = MCH_LOOK.ALL
+   ' Dati generali CN
+   Friend m_CN As CN_generico
+   Private m_bFirst As Boolean = True
+   ' Riferimento alla pagina correntemente attiva
+   Friend m_ActiveDirectCutPage As DirectCutPages = DirectCutPages.DirectCut
+   ' Variabili che indicano attivazione paginette con bottoni macchina
+   Private m_ControlsBtn_IsActive As Boolean
+
+   Public Shared m_dZSafe As Double = 52
+
+   ' Variabile che indica se sono attivi i bottoni macchina nuovi o vecchi
+   Friend m_NewMachineButtonsType As Boolean
+   ' Indica che la finestra del talio Singolo deve essere di tipo manuale
+   Friend m_bManulaCut As Boolean = False
+
+   Enum DirectCutPages
+      DirectCut
+      DirectCut1
+      Polishing
+      CopyTemplate
+      SawTest
+   End Enum
+
+   Private Sub ControlsDirectCutUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' leggo la configurazione del programma per i nuovi tagli manuali
+      m_bManulaCut = GetPrivateProfileInt(S_GENERAL, K_MANUAL_CUT, 0, m_MainWindow.GetIniFile()) <> 0
+
+      'Creazione delle Page UserControl
+      m_SawTest = New SawTestUC
+      m_Polishing = New Polishing
+      m_CopyTemplate = New CopyTemplateUC
+
+      'Posizionemento nella griglia delle Page UserControl
+      m_SawTest.SetValue(Grid.RowProperty, 1)
+      m_Polishing.SetValue(Grid.RowProperty, 1)
+      m_CopyTemplate.SetValue(Grid.RowProperty, 1)
+
+      ' assegno i nomi ai pulsanti
+      SawTestTxt.Text = EgtMsg(90207)
+      PolishingTxt.Text = EgtMsg(90231)
+      'CopyTemplateBtn.Content = EgtMsg(90209)
+      CopyTemplateTxt.Text = EgtMsg(90209)
+      'SquaringTxt.Text = "Squaring"
+
+   End Sub
+
+   Private Sub ControlsDirectCutUC1_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      ' Se rientro da simulazione
+      If m_ActiveDirectCutPage = DirectCutPages.SawTest Then
+         LeftButtonGrid.Children.Add(m_SawTest)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.CopyTemplate Then
+         Me.LeftButtonGrid.Children.Add(m_CopyTemplate)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.Polishing Then
+         Me.LeftButtonGrid.Children.Add(m_Polishing)
+         Return
+      End If
+
+      ' Caso standard
+      m_ActiveDirectCutPage = DirectCutPages.DirectCut1
+
+      ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa per lama (H1)
+      Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
+      Dim bSawHeadOk As Boolean = m_MainWindow.m_CurrentMachine.ExistsSawHead()
+
+      PolishingBtn.IsEnabled = (bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
+      SawTestBtn.IsEnabled = (bRawOk And bSawHeadOk)
+      CopyTemplateBtn.IsEnabled = bSawHeadOk
+
+      ' aggiorno la visualizzazione dei parametri
+      ReloadParam()
+
+      ' Nascondo i pezzi in parcheggio
+      HideParkedParts()
+      EgtZoom(ZM.ALL)
+
+   End Sub
+
+   ' ricarica i dati utensili
+   Public Sub ReloadParam()
+      Dim sCurrSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sCurrSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim bSaw As Boolean = False
+
+      ' se esiste una lavorazione di lama corrente vuol dire che deve essere preferita
+      If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
+         bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
+      End If
+      If Not bSaw Then
+         EgtOutLog(" WARNING! Impossible to get point from SAW, there isn't SAW or SAWING! It's available only by DRAW")
+      End If
+      'm_SingleCut.SetEnableParam(bSaw)
+      'm_MultipleCut.SetEnableParam(bSaw)
+      'm_GridCut.SetEnableParam(bSaw)
+   End Sub
+
+#Region "COMMAND CLICK BTN"
+   Private Sub SawTestBtn_Click(sender As Object, e As RoutedEventArgs) Handles SawTestBtn.Click
+      LeftButtonGrid.Children.Add(m_SawTest)
+      m_ActiveDirectCutPage = DirectCutPages.SawTest
+   End Sub
+
+   Private Sub PolishingBtn_Click(sender As Object, e As RoutedEventArgs) Handles PolishingBtn.Click
+      LeftButtonGrid.Children.Add(m_Polishing)
+      m_ActiveDirectCutPage = DirectCutPages.Polishing
+   End Sub
+
+   Private Sub CopyTemplateBtn_Click(sender As Object, e As RoutedEventArgs) Handles CopyTemplateBtn.Click
+      LeftButtonGrid.Children.Add(m_CopyTemplate)
+      m_ActiveDirectCutPage = DirectCutPages.CopyTemplate
+   End Sub
+
+   Private Sub ChangeUC1Btn_Click(sender As Object, e As RoutedEventArgs) Handles ChangeUC1Btn.Click
+      DirectCutPage_Unloaded(Nothing, Nothing)
+      m_ActiveDirectCutPage = DirectCutPages.DirectCut1
+      m_MainWindow.m_DirectCutPageUC.LoadDirectCutUC()
+   End Sub
+
+#End Region    ' Command Click Btn
+
+   Friend Sub DirectCutPage_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      Select Case m_ActiveDirectCutPage
+         Case DirectCutPages.SawTest
+            LeftButtonGrid.Children.Remove(m_SawTest)
+         Case DirectCutPages.Polishing
+            LeftButtonGrid.Children.Remove(m_Polishing)
+         Case DirectCutPages.CopyTemplate
+            LeftButtonGrid.Children.Remove(m_CopyTemplate)
+      End Select
+   End Sub
+
+End Class

DirectCuts/ControlsMachineButtonUC.xaml

@@ -1,13 +1,13 @@
 <UserControl x:Class="ControlsMachineButtonUC" 
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   DataContext="Self"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   xmlns:OmagCUT="clr-namespace:OmagCUT"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
-   mc:Ignorable="d" 
-   d:DesignHeight="597.3" d:DesignWidth="256">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             DataContext="Self"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:OmagCUT="clr-namespace:OmagCUT"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
 
    <Border Style="{DynamicResource OmagCut_Page2Border}">
 
@@ -16,33 +16,33 @@
             <DataTemplate DataType="{x:Type OmagCUT:TwoStateButton}">
                <ToggleButton IsChecked="{Binding IsChecked}"
                              Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-                  <Image Source="{Binding ImageSource}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                  <Image Source="{Binding ImageSource}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
                </ToggleButton>
             </DataTemplate>
             <DataTemplate DataType="{x:Type OmagCUT:NoStateButton}">
                <Button Command="{Binding ExecuteCommand}"
                        Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-                  <Image Source="{Binding ImageSource}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                  <Image Source="{Binding ImageSource}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
                </Button>
             </DataTemplate>
             <DataTemplate DataType="{x:Type OmagCUT:ThreeStateButton}">
                <Button Command="{Binding ExecuteCommand}"
                        Background="{Binding Background}"
                        Style="{DynamicResource OmagCut_MachineCommandsYellowGradientYellowIconButton}">
-                  <Image Source="{Binding ImageSource}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                  <Image Source="{Binding ImageSource}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
                </Button>
             </DataTemplate>
             <DataTemplate DataType="{x:Type OmagCUT:DoubleCommandButton}">
                <ToggleButton IsChecked="{Binding IsChecked}"
                              Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-                  <Image Source="{Binding ImageSource}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                  <Image Source="{Binding ImageSource}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
                </ToggleButton>
             </DataTemplate>
             <DataTemplate DataType="{x:Type OmagCUT:PressedCommandButton}">
                <Button Style="{DynamicResource OmagCut_MachineCommandsYellowGradientYellowIconButton}"
                        PreviewMouseUp="PressedCommandButton_PreviewMouseUp"
                        PreviewMouseDown="PressedCommandButton_PreviewMouseDown">
-                  <Image Source="{Binding ImageSource}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                  <Image Source="{Binding ImageSource}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
                </Button>
             </DataTemplate>
          </ItemsControl.Resources>
@@ -60,7 +60,7 @@
             </ItemsPanelTemplate>
          </ItemsControl.ItemsPanel>
       </ItemsControl>
-      
+
    </Border>
 
 </UserControl>

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -1,7 +1,6 @@
 Imports System.Collections.ObjectModel
 Imports System.ComponentModel
 Imports EgtUILib
-Imports EgtWPFLib
 
 Public Class ControlsMachineButtonUC
    Implements INotifyPropertyChanged
@@ -23,6 +22,9 @@ Public Class ControlsMachineButtonUC
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
 
+   ' visualizzo l'elenco degli elementi della pagina sono al primo avvio
+   Friend Shared m_OutLogTypeButton As Boolean = True
+
    ' Creazione converter da String a ImageSource
    Dim ImageConverter As New ImageSourceConverter
 
@@ -72,10 +74,37 @@ Public Class ControlsMachineButtonUC
                If Not IsNothing(ButtonToAdd) Then m_ButtonList.Add(ButtonToAdd)
             End If
          End While
+
+         For Each MachineButton As MachineButton In m_ButtonList
+            GetTypeButton(MachineButton)
+         Next
+         m_OutLogTypeButton = False
+
          NotifyPropertyChanged("ButtonList")
       End If
    End Sub
 
+#Region "STATE CHANGED"
+   ' ------------------------------------------------------------------------------
+   ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
+   '-------------------------------------------------------------------------------
+
+   Friend Sub GetTypeButton(CurrMachineButton As MachineButton)
+      If Not m_OutLogTypeButton Then Return
+      Dim BtnType As Type = CurrMachineButton.GetType
+      If BtnType Is GetType(NoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(0) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(TwoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(1) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(ThreeStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(2) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(DoubleCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(3) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(PressedCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(4) ") & " , " & CurrMachineButton.StateFlag)
+      End If
+   End Sub
+
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim SpindleButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
@@ -255,38 +284,34 @@ Public Class ControlsMachineButtonUC
       Dim DoorOpenedButton As ThreeStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_DOORCLOSED Then
-            'If TypeOf MachineButton Is NoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, NoStateButton)
-            'ElseIf TypeOf MachineButton Is TwoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, TwoStateButton)
-            'ElseIf TypeOf MachineButton Is ThreeStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, ThreeStateButton)
-            'ElseIf TypeOf MachineButton Is DoubleCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, DoubleCommandButton)
-            'ElseIf TypeOf MachineButton Is PressedCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, PressedCommandButton)
-            'End If
             DoorClosedButton = MachineButton
          End If
-         If MachineButton.StateFlag = "DoorOpened" Then
+         If MachineButton.StateFlag = K_DOOROPENDED Then
             DoorOpenedButton = MachineButton
          End If
       Next
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorClosedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_Red")
             Case 1, 2
+               ' porta in movimento/aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
          End Select
       End If
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorOpenedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
             Case 1
+               ' porta in movimento 
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Yellow")
             Case 2
+               ' porta chiusa
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Green")
          End Select
       End If
@@ -330,6 +355,78 @@ Public Class ControlsMachineButtonUC
       End If
    End Sub
 
+   Friend Sub ParkingStateChanged(ParkingState As Boolean)
+      Dim ParkingButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = K_PARKING Then
+            ParkingButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(ParkingButton) Then
+         ParkingButton.SetIsChecked(ParkingState)
+      End If
+   End Sub
+
+   Friend Sub ZoneStateChanged(ZoneState As Integer)
+      Dim bEnableZone1 As Boolean = False
+      If ZoneState = 1 Then
+         bEnableZone1 = True
+      ElseIf ZoneState = 2 Then
+         bEnableZone1 = False
+      End If
+      ' attivo il comando associato
+      Dim EnableZoneButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = BTN_ENABLE_ZONE_1 Then
+            EnableZoneButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnableZoneButton) Then
+         EnableZoneButton.SetIsChecked(bEnableZone1)
+      End If
+      ' disattivo l'altro per esclusione
+      EnableZoneButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = BTN_ENABLE_ZONE_2 Then
+            EnableZoneButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnableZoneButton) Then
+         EnableZoneButton.SetIsChecked(Not bEnableZone1)
+      End If
+   End Sub
+
+   Friend Sub PcStateChanged(EnablePC As Integer)
+      Dim bEnablePC1 As Boolean = False
+      If EnablePC = 1 Then
+         bEnablePC1 = True
+      ElseIf EnablePC = 2 Then
+         bEnablePC1 = False
+      End If
+      ' attivo/disattivo il comando associato
+      Dim EnablePCButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = K_ENABLEPC & "_1" Then
+            EnablePCButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnablePCButton) Then
+         EnablePCButton.SetIsChecked(bEnablePC1)
+      End If
+      ' disattivo/attivo l'altro per esclusione
+      EnablePCButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = BTN_ENABLE_ZONE_2 Then
+            EnablePCButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(EnablePCButton) Then
+         EnablePCButton.SetIsChecked(Not bEnablePC1)
+      End If
+   End Sub
+
+#End Region    ' State Range
+
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
                          ByVal lpKeyName As String,
@@ -402,6 +499,8 @@ Public MustInherit Class MachineButton
    Friend Const BTN_STATE_THREEAXIS As String = "ThreeAxis"
    Friend Const BTN_STATE_FIVEAXIS As String = "FiveAxis"
    Friend Const BTN_STATE_NOTHING As String = "Nothing"
+   Friend Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Friend Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
 
    ' Dichiarazione delle Page UserControl
    Friend Shared m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
@@ -452,183 +551,6 @@ Public MustInherit Class MachineButton
       m_StateFlag = StateFlag
    End Sub
 
-#Region "METHODS"
-
-   Friend Sub ExecuteMDICommand(sLuaFileName As String)
-      If String.IsNullOrWhiteSpace(sLuaFileName) Then Return
-      Dim CmdString As String = String.Empty
-      Dim b2Start As Boolean = False
-      Dim EActive As Boolean = False
-      Dim ENumber As String = String.Empty
-      Dim EValue As String = String.Empty
-      Dim EType As String = 0
-      Dim ENumber2 As String = String.Empty
-      Dim EValue2 As String = String.Empty
-      Dim EType2 As String = 0
-      ' eseguo la lettura del file .lua associato al comando
-      ExecuteDirectCmdLua(sLuaFileName, CmdString, b2Start, EActive, ENumber, EValue, EType, ENumber2, EValue2, EType2)
-      '--------------------------------------------------------- PLC ---------------------------------------------------------
-      If EActive Then
-         Select Case m_MainWindow.m_CNCommunication.m_nNCType
-            Case 1, 2
-               ' se scrittura delle varibili PLC
-               If m_CN.m_NewVariable And m_MainWindow.m_CNCommunication.m_nNCType = 2 Then
-                  ' solo per Flexium
-                  m_CN.DPlcVariables_WriteVariables(ENumber, EValue)
-                  If Not IsNothing(ENumber2) And Not IsNothing(EValue2) Then
-                     m_CN.DPlcVariables_WriteVariables(ENumber2, EValue2)
-                  End If
-                  ' altrimenti scrittura delle variabili E
-               Else
-                  m_CN.DVariables_WriteVariables2(ENumber, EValue)
-               End If
-               Return
-            Case 3
-               ' scrivo prima variabile
-               Select Case CShort(EType)
-                  Case 1
-                     m_CN.DVariables_WriteVariables3(ENumber, CShort(EType), CInt(EValue), 0, 0, "")
-                     EgtOutLog("ENumber= " & ENumber & "EType= " & CShort(EType) & "EValue= " & CInt(EValue))
-                  Case 2
-                     m_CN.DVariables_WriteVariables3(ENumber, CShort(EType), 0, CLng(EValue), 0, "")
-                     EgtOutLog("ENumber= " & ENumber & "EType= " & CShort(EType) & "EValue= " & CLng(EValue))
-                  Case 3
-                     Dim d As Double = 0
-                     StringToDouble(EValue, d)
-                     m_CN.DVariables_WriteVariables3(ENumber, CShort(EType), 0, 0, d, "")
-                     EgtOutLog("ENumber= " & ENumber & "EType= " & CShort(EType) & "EValue= " & d)
-                  Case 4
-                     m_CN.DVariables_WriteVariables3(ENumber, CShort(EType), 0, 0, 0, EValue)
-                     EgtOutLog("ENumber= " & ENumber & "EType= " & CShort(EType) & "EValue= " & EValue)
-               End Select
-               EgtOutLog("dopo scrittura prima variabile")
-               If Not IsNothing(EType2) AndAlso CShort(EType) > 0 Then
-                  System.Threading.Thread.Sleep(100)
-                  ' scrivo seconda variabile
-                  Select Case CShort(EType2)
-                     Case 1
-                        m_CN.DVariables_WriteVariables3(ENumber2, CShort(EType2), CInt(EValue2), 0, 0, "")
-                        EgtOutLog("ENumber2= " & ENumber2 & "EType2= " & CShort(EType2) & "EValue2= " & CInt(EValue2))
-                     Case 2
-                        m_CN.DVariables_WriteVariables3(ENumber2, CShort(EType2), 0, CLng(EValue2), 0, "")
-                        EgtOutLog("ENumber2= " & ENumber2 & "EType2= " & CShort(EType2) & "EValue2= " & CLng(EValue2))
-                     Case 3
-                        Dim d As Double = 0
-                        StringToDouble(EValue2, d)
-                        m_CN.DVariables_WriteVariables3(ENumber2, CShort(EType2), 0, 0, d, "")
-                        EgtOutLog("ENumber2= " & ENumber2 & "EType2= " & CShort(EType2) & "EValue2= " & d)
-                     Case 4
-                        m_CN.DVariables_WriteVariables3(ENumber2, CShort(EType2), 0, 0, 0, EValue2)
-                        EgtOutLog("ENumber2= " & ENumber2 & "EType2= " & CShort(EType2) & "EValue2= " & EValue2)
-                  End Select
-                  EgtOutLog("dopo scrittura seconda variabile")
-               End If
-               Return
-         End Select
-      End If
-      '--------------------------------------------------------- MDI ---------------------------------------------------------
-      Dim nResult As Short
-      ' assegno la modalità di funzionamento
-      Select Case m_MainWindow.m_CNCommunication.m_nNCType
-         Case 1, 2
-            nResult = m_CN.DGeneralFunctions_WriteCncMode(2)     ' Modalità MDI per controlli num
-         Case 3
-            'Per il siemens non devo fare nulla
-      End Select
-      ' salvo la stringa di comando ricevuta dal file lua
-      m_CN.sz_ManualDataInput = CmdString
-      ' esguo la funzione che ha il compito di scrivere il comando MDI
-      m_CN.MDI_command()
-      ' avvio l'esecuzione del comando
-      Select Case m_MainWindow.m_CNCommunication.m_nNCType
-         Case 1, 2
-            System.Threading.Thread.Sleep(500)
-            m_CN.DGeneralFunctions_CycleStart()
-         Case 3
-            'Per il siemens non devo fare nulla
-      End Select
-      ' se richiesto ripeto l'operazione 
-      If b2Start Then
-         EgtOutLog("Avvio secondo cliclo start")
-         System.Threading.Thread.Sleep(800)
-         m_CN.DGeneralFunctions_CycleStart()
-      End If
-      System.Threading.Thread.Sleep(300)
-      ' riprostino la modalità manuale
-      nResult = m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
-   End Sub
-
-   ' lettura delle variavili scritte nel file Lua
-   Friend Sub ExecuteDirectCmdLua(LuaFileName As String, ByRef CmdString As String, ByRef b2Start As Boolean, ByRef EActive As Boolean, ByRef ENumber As String, ByRef EValue As String, ByRef EType As String, ByRef ENumber2 As String, ByRef EValue2 As String, ByRef EType2 As String)
-      Dim sBaseDir As String = m_MainWindow.m_CurrentMachine.sMachDir & "\DirectCmd\"
-      If EgtLuaExecFile(sBaseDir & LuaFileName) Then
-         EgtOutLog("Lua " & sBaseDir & LuaFileName & " eseguito")
-      Else
-         EgtOutLog("Lua " & sBaseDir & LuaFileName & " non eseguito")
-      End If
-
-      Dim dFeed As Double = 0
-      If Not String.IsNullOrWhiteSpace(m_DirectCutPage.m_ManualAxesMove.FeedTxBx.Text) Then
-         StringToLen(m_DirectCutPage.m_ManualAxesMove.FeedTxBx.Text, dFeed)
-      Else
-         EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
-         EgtTdbGetCurrToolParam(MCH_TP.FEED, dFeed)
-      End If
-      EgtLuaSetGlobNumVar("CMD.F", dFeed)
-      Dim dSpeed As Double = 0
-      If Not String.IsNullOrWhiteSpace(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text) Then
-         StringToDouble(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text, dSpeed)
-      Else
-         EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
-         EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
-      End If
-      EgtLuaSetGlobNumVar("CMD.S", dSpeed)
-      Dim dL1, dL2, dL3, dR1, dR2 As Double
-      m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
-      EgtLuaSetGlobNumVar("CMD.L1", dL1)
-      EgtLuaSetGlobNumVar("CMD.L2", dL2)
-      EgtLuaSetGlobNumVar("CMD.L3", dL3)
-      EgtLuaSetGlobNumVar("CMD.R1", dR1)
-      EgtLuaSetGlobNumVar("CMD.R2", dR2)
-      EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
-      EgtLuaCallFunction("CmdString")
-      ' Leggo variabili
-      CmdString = String.Empty
-      EgtLuaGetGlobStringVar("CMD.CMDSTRING", CmdString)
-      b2Start = False
-      EgtLuaGetGlobBoolVar("CMD.DOUBLESTART", b2Start)
-      EActive = False
-      EgtLuaGetGlobBoolVar("CMD.EACTIVE", EActive)
-      ENumber = String.Empty
-      EgtLuaGetGlobStringVar("CMD.ENUMBER", ENumber)
-      EValue = String.Empty
-      EgtLuaGetGlobStringVar("CMD.EVALUE", EValue)
-      EType = String.Empty
-      EgtLuaGetGlobStringVar("CMD.ETYPE", EType)
-      EgtOutLog("ENUMBER: " & ENumber & " EVALUE: " & EValue & " ETYPE: " & EType)
-      ENumber2 = String.Empty
-      EgtLuaGetGlobStringVar("CMD.ENUMBER2", ENumber2)
-      EValue2 = String.Empty
-      EgtLuaGetGlobStringVar("CMD.EVALUE2", EValue2)
-      EType2 = String.Empty
-      EgtLuaGetGlobStringVar("CMD.ETYPE2", EType2)
-      EgtOutLog("ENUMBER2: " & ENumber2 & " EVALUE2: " & EValue2 & " ETYPE2: " & EType2)
-      ' Reset lua
-      EgtLuaResetGlobVar("CmdString")
-      EgtLuaResetGlobVar("CMD")
-      ' Log del comando
-      EgtOutLog("CmdString=" & If(Not String.IsNullOrEmpty(CmdString), CmdString, "") &
-                " b2Start=" & b2Start.ToString() &
-                " EActive=" & EActive.ToString &
-                " ENumber=" & If(Not String.IsNullOrEmpty(ENumber), ENumber, "") &
-                " EValue=" & If(Not String.IsNullOrEmpty(EValue), EValue, "") &
-                " EType=" & If(Not String.IsNullOrEmpty(EType), CInt(EType).ToString, "") &
-                " ENumber2=" & If(Not String.IsNullOrEmpty(ENumber2), ENumber2, "") &
-                " EValue2=" & If(Not String.IsNullOrEmpty(EValue2), EValue2, "") &
-                " EType2=" & If(Not String.IsNullOrEmpty(EType2), CInt(EType2).ToString, ""))
-   End Sub
-
-#End Region    ' METHODS
 
    Public Event PropertyChanged(sender As Object, e As PropertyChangedEventArgs) Implements INotifyPropertyChanged.PropertyChanged
 
@@ -647,12 +569,27 @@ Public Class TwoStateButton
          Return m_IsChecked
       End Get
       Set(value As Boolean)
+         ' accendo il comando, anche se dovrei aspettare di leggere lo stato da PLC
          m_IsChecked = value
+         Dim sLuaScriptFile As String = m_MainWindow.m_CurrentMachine.sMachDir & "\DirectCmd\"
          If value Then
+            sLuaScriptFile &= TLuaScriptName
             ExecuteMDICommand(TLuaScriptName)
          Else
+            sLuaScriptFile &= FLuaScriptName
             ExecuteMDICommand(FLuaScriptName)
          End If
+
+         Dim IsPressedShiftKey As Boolean = False
+         If (Keyboard.Modifiers And ModifierKeys.Shift) > 0 AndAlso m_MainWindow.GetDebug() > 4 Then IsPressedShiftKey = True
+         ' procedo all'apertura del file CadCut1 appena generato (solo se generazione corretta)
+         If IsPressedShiftKey Then
+            Try
+               Process.Start("Notepad.exe", sLuaScriptFile)
+            Catch ex As Exception
+               EgtOutLog(ex.ToString)
+            End Try
+         End If
       End Set
    End Property
    Friend Sub SetIsChecked(value As Boolean)
@@ -743,6 +680,7 @@ Public Class NoStateButton
             ExecuteMDICommand(TLuaScriptName)
          End If
       Else
+         ' FANUC, SIEMENS
          ExecuteMDICommand(TLuaScriptName)
       End If
    End Sub

DirectCuts/CopyTemplateUC.xaml

@@ -1,14 +1,14 @@
 <UserControl x:Class="CopyTemplateUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="597.3" d:DesignWidth="256">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
+
+   <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
+   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
 
-    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
-    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
-            
       <!-- Definizione della Grid SingleCut -->
       <Grid Name="SingleCutGrid" >
          <Grid.ColumnDefinitions>
@@ -35,16 +35,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            <Button Name="Point1Btn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Acquisisci-PImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
          </Grid>
 
-         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
-            Margin="6,0,6,0">
+         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_ComboBox}"
+                   Margin="6,0,6,0">
             <ComboBox.ItemTemplate>
                <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
                </DataTemplate>
             </ComboBox.ItemTemplate>
          </ComboBox>
@@ -55,10 +56,12 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <ToggleButton Name="LineBtn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="ArcBtn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+            <ToggleButton Name="LineBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource LineaImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
+            <ToggleButton Name="ArcBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource ArcoImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
 
          </Grid>
 
@@ -69,17 +72,21 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="RemoveBtn" Grid.Column="0" Grid.Row="3" Grid.RowSpan="2"
-            Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="CloseBtn" Grid.Column="1" Grid.Row="3" Grid.RowSpan="2"
-            Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+            <Button Name="RemoveBtn" Grid.Column="0" Grid.Row="3" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+               <Image Source="{DynamicResource Rimuovi-segmentoImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="CloseBtn" Grid.Column="1" Grid.Row="3" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+               <Image Source="{DynamicResource ChiudiImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
          </Grid>
 
-            <Button Name="SaveBtn" Grid.Column="0" Grid.Row="10" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+         <Button Name="SaveBtn" Grid.Column="0" Grid.Row="10"  Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+            <Image Source="{DynamicResource Salva-taglioImg}" Style="{DynamicResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
 
-            <Button Name="ExitBtn" Grid.Column="2" Grid.Row="10" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+         <Button Name="ExitBtn" Grid.Column="2" Grid.Row="10" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
 
       </Grid>

DirectCuts/CopyTemplateUC.xaml.vb

@@ -5,6 +5,8 @@ Public Class CopyTemplateUC
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   Private m_refControlDirectCutUC As ControlsDirectCutUC1
+
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Array stringhe modalità di acquisizione dei punti
@@ -43,22 +45,23 @@ Public Class CopyTemplateUC
 
    Private Sub CopyTemplate_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
-      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
-      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(MSG_DIRECTCUTPAGEUC + 12)
-      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 25)
+      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(90224)     ' Lama
+      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(90212)   ' Laser
+      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(90225)    ' Disegno
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
 
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      LineBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 50)
-      ArcBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 51)
-      RemoveBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 52)
-      CloseBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 53)
-      SaveBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 54)
+      Point1Btn.ToolTip = EgtMsg(90210)      ' Acquisisci P1
+      LineBtn.ToolTip = EgtMsg(90250)        ' Linea
+      ArcBtn.ToolTip = EgtMsg(90251)         ' Arco
+      RemoveBtn.ToolTip = EgtMsg(90252)      ' Rimuovi
+      CloseBtn.ToolTip = EgtMsg(90253)       ' Chiudi
+      SaveBtn.ToolTip = EgtMsg(90254)        ' Salva
    End Sub
 
    Private Sub CopyTemplate_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_refControlDirectCutUC = m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC1
       m_bActive = True
       SaveBtn.IsEnabled = False
       LineBtn.IsChecked = True
@@ -163,6 +166,15 @@ Public Class CopyTemplateUC
    Private Sub Point1Btn_Click(sender As Object, e As RoutedEventArgs) Handles Point1Btn.Click
       ' Verifico configurazione tavola e grezzo
       If Not m_bTabOk Then Return
+
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      If bIsMultiCut Then
+         EgtSetCalcTool(sSaw, "H1", 1)
+      End If
+
       ' Se acquisizione lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
@@ -170,14 +182,19 @@ Public Class CopyTemplateUC
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then
             Return
          End If
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
          ' Altrimenti da lama
@@ -185,7 +202,7 @@ Public Class CopyTemplateUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
@@ -193,8 +210,6 @@ Public Class CopyTemplateUC
       Else
          ' Verifico presenza punto da mouse
          If Not m_bMouseOk Then Return
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Imposto la lama corrente
          If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
          ' Assegno punto selezionato nel disegno a m_ptTipP1
@@ -254,8 +269,7 @@ Public Class CopyTemplateUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
-      m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function EraseCopyTemplatePart() As Boolean

DirectCuts/CustomGridUC.xaml

@@ -0,0 +1,80 @@
+<UserControl x:Class="CustomGridUC"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             FontFamily="{DynamicResource OmagCut_Font}"
+             Background="#636974">
+
+   <Grid Name ="CustomGrid" Grid.Row="5" Grid.ColumnSpan="2">
+      <Grid.RowDefinitions>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="2.5*"/>
+         <RowDefinition Height="Auto"/>
+      </Grid.RowDefinitions>
+      <Grid.ColumnDefinitions>
+         <ColumnDefinition Width="1*"/>
+         <ColumnDefinition Width="1*"/>
+      </Grid.ColumnDefinitions>
+
+      <UniformGrid Grid.Row="0"
+                   Grid.ColumnSpan="2"
+                   Columns="4"
+                   Margin="2,2,0,2">
+         <Button Name="AddCutBtn" Content="+" 
+                 Style="{DynamicResource OmagCut_YellowTextButton}"
+                 Width="40" Height="40" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+         <Button Name="RemoveCutBtn" Content="-" 
+                 Style="{DynamicResource OmagCut_YellowTextButton}"
+                 Width="40" Height="40" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+         <ToggleButton Name="Cut_XTgBtn" Content="X"
+                       Style="{DynamicResource OmagCut_YellowToggleButton}"
+                       Width="40" Height="40" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+         <ToggleButton Name="Cut_YTgBtn" Content="Y"
+                       Style="{DynamicResource OmagCut_YellowToggleButton}"
+                       Width="40" Height="40" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+      </UniformGrid>
+
+      <TextBlock Name="NumPzXTxBl" Grid.Column="0" Grid.Row="1" HorizontalAlignment="Center"
+                 Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+      <TextBlock Name="DimPzXTxBl" Grid.Column="1" Grid.Row="1" HorizontalAlignment="Center"
+                 Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+
+      <ScrollViewer Background="Transparent" Grid.Row="2"  
+                    Grid.ColumnSpan="2"
+                    VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Hidden">
+         <ListBox Name="CustomGridLstBx" ScrollViewer.CanContentScroll="False">
+            <ItemsControl.ItemsPanel>
+               <ItemsPanelTemplate>
+                  <StackPanel Orientation="Vertical"/>
+               </ItemsPanelTemplate>
+            </ItemsControl.ItemsPanel>
+            <ItemsControl.ItemTemplate>
+               <DataTemplate>
+                  <Grid Width="210">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="5*"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="5*"/>
+                     </Grid.ColumnDefinitions>
+                     <EgtWPFLib:EgtTextBox Text="{Binding sNumber}" Grid.Column="0"
+                                           Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                     <EgtWPFLib:EgtTextBox Text="{Binding sInteraxis}" Grid.Column="2"
+                                           Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                  </Grid>
+               </DataTemplate>
+            </ItemsControl.ItemTemplate>
+         </ListBox>
+      </ScrollViewer>
+      <UniformGrid Grid.Row="3"
+                   Grid.ColumnSpan="2"
+                   Columns="2"
+                   Margin="0,2,0,2">
+         <Button Name="UpdateBtn" 
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
+         <Button Name="ExitBtn" Grid.Row="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+         </Button>
+      </UniformGrid>
+   </Grid>
+</UserControl>

DirectCuts/CustomGridUC.xaml.vb

@@ -0,0 +1,81 @@
+Imports EgtUILib
+
+Public Class CustomGridUC
+
+#Region "FIELDS & PROPERTIES"
+
+   ' Riferimento a GridCut
+   Private m_refGridCut As GridCut
+
+#End Region    ' Fields & Properties
+
+#Region "CONSTRUCTOR"
+
+   Sub New(GC As GridCut)
+      InitializeComponent()
+      m_refGridCut = GC
+      CustomGridLstBx.ItemsSource = m_refGridCut.m_ListOfCut_X
+      Cut_XTgBtn.IsChecked = True
+      NumPzXTxBl.Text = EgtMsg(90217)     ' Numero
+      DimPzXTxBl.Text = EgtMsg(90218)     ' Dimensione
+      UpdateBtn.Content = EgtMsg(90265)   ' Aggiorna
+   End Sub
+
+#End Region    ' Constructor
+
+#Region "EVENTS"
+
+   Private Sub CutX_Selected() Handles Cut_XTgBtn.Click
+      If Cut_XTgBtn.IsChecked Then
+         Cut_YTgBtn.IsChecked = False
+         CustomGridLstBx.ItemsSource = m_refGridCut.m_ListOfCut_X
+         CustomGridLstBx.UpdateLayout()
+      End If
+   End Sub
+
+   Private Sub CutY_Selected() Handles Cut_YTgBtn.Click
+      If Cut_YTgBtn.IsChecked Then
+         Cut_XTgBtn.IsChecked = False
+         CustomGridLstBx.ItemsSource = m_refGridCut.m_ListOfCut_Y
+         CustomGridLstBx.UpdateLayout()
+      End If
+   End Sub
+
+   Private Sub AddCut_Click(sender As Object, e As EventArgs) Handles AddCutBtn.Click
+      If Cut_XTgBtn.IsChecked Then
+         m_refGridCut.m_ListOfCut_X.Add(New Cut_Axis(0, 0))
+      ElseIf Cut_YTgBtn.IsChecked Then
+         m_refGridCut.m_ListOfCut_Y.Add(New Cut_Axis(0, 0))
+      End If
+      CustomGridLstBx.UpdateLayout()
+   End Sub
+
+   Private Sub RemoveCut_Click(sender As Object, e As EventArgs) Handles RemoveCutBtn.Click
+      Dim CurrIndexListSelected As Integer = -1
+      CurrIndexListSelected = CustomGridLstBx.SelectedIndex
+      If Cut_XTgBtn.IsChecked Then
+         If CurrIndexListSelected < 0 Or CurrIndexListSelected > m_refGridCut.m_ListOfCut_X.Count - 1 Then
+            CurrIndexListSelected = m_refGridCut.m_ListOfCut_X.Count - 1
+         End If
+         m_refGridCut.m_ListOfCut_X.RemoveAt(CurrIndexListSelected)
+      ElseIf Cut_YTgBtn.IsChecked Then
+         If CurrIndexListSelected < 0 Or CurrIndexListSelected > m_refGridCut.m_ListOfCut_Y.Count - 1 Then
+            CurrIndexListSelected = m_refGridCut.m_ListOfCut_Y.Count - 1
+         End If
+         m_refGridCut.m_ListOfCut_Y.RemoveAt(CurrIndexListSelected)
+      End If
+      CustomGridLstBx.UpdateLayout()
+   End Sub
+
+   Public Sub Update_Click() Handles UpdateBtn.Click
+      m_refGridCut.CreateGridCut()
+      EgtDraw()
+   End Sub
+
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      m_refGridCut.SingleCutGrid.Children.Remove(Me)
+   End Sub
+
+#End Region    ' Events
+
+End Class

DirectCuts/DirectCut.vb

@@ -4,6 +4,9 @@ Module DirectCut
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
 
+   ' Polishing attivo
+   Friend m_bPolishingOn As Boolean = False
+
    Friend Function CreateDirectCutPart() As Integer
       Dim nPartId = EgtCreateGroup(GDB_ID.ROOT)
       EgtSetName(nPartId, NAME_DIRECTCUT)
@@ -27,4 +30,8 @@ Module DirectCut
       Return EgtGetFirstNameInGroup(m_MainWindow.m_CurrentProjectPageUC.m_nRawId, NAME_DIRECTCUT)
    End Function
 
+   Friend Function IsDirectCutOn() As Boolean
+      Return ( GetDirectCutPart() <> GDB_ID.NULL OrElse m_bPolishingOn)
+   End Function
+
 End Module

DirectCuts/DirectCutPageUC.xaml

@@ -1,10 +1,9 @@
 <UserControl x:Class="DirectCutPageUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="853.3" d:DesignWidth="1280">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" d:DesignHeight="853.3" d:DesignWidth="1280">
 
    <!-- Definizione della DirectCutPage -->
    <Grid Name="DirectCutPageGrid" >
@@ -28,39 +27,41 @@
             <ColumnDefinition Width="7*"/>
          </Grid.ColumnDefinitions>
 
-          <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+         <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+            <Image Source="{DynamicResource PhotoImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
-            <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+         <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+            <Image Source="{DynamicResource RawPartImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
 
          <Button Name="MachViewModeBtn" Grid.Column="3"
             Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource MHTImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+            <Image Source="{DynamicResource MHTImg}" Style="{DynamicResource OmagCut_ScaleButtonIcon}"/>
          </Button>
 
       </Grid>
 
-         <!-- Definizione della Grid laterale -->
-      <Grid Name="LeftButtonGrid" Grid.Row="1" >
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="7*"/>
-         </Grid.RowDefinitions>
-
-         <!-- Definizione della Grid laterale -->
-         <Grid Name="CutTypeGrid" Grid.Row="1" >
+      <!-- Definizione della Grid laterale -->
+      <!--
+        <Grid Name="LeftButtonGrid" Grid.Row="1" >
             <Grid.RowDefinitions>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="7*"/>
+            </Grid.RowDefinitions>
+
+            -->
+      <!-- Definizione della Grid laterale -->
+      <!--<Grid Name="CutTypeGrid" Grid.Row="1" >
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
                 </Grid.RowDefinitions>
                 <Button Name="ManualBtn" Grid.Column="2" Grid.Row="0"                    
                         Style="{DynamicResource OmagCut_YellowIconButton}">
@@ -140,30 +141,65 @@
                                    Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
                     </Grid>
                 </Button>
-             
-            <Button Name="PolishingBtn" Grid.Row="6"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-            <Button Name="CopyTemplateBtn" Grid.Row="7"
-                    Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Grid>
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="80"/>
-                        <ColumnDefinition Width="140"/>
-                    </Grid.ColumnDefinitions>
-                    <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
-                    <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                <Button Name="PolishingBtn" Grid.Row="6"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="PolishingTxt" Grid.Column="1"
                                Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                </Grid>
-            </Button>
-             
-            <Button Name="SawTestBtn" Grid.Row="8"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                    </Grid>
+                </Button>
+
+                -->
+      <!--<Button Name="CopyTemplateBtn" Grid.Row="7"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>-->
+      <!--
+                <Button Name="SquaringBtn" Grid.Row="7"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SquaringTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="SawTestBtn" Grid.Row="8"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SawTestTxt" Grid.Column="1"
+                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+            </Grid>-->
+      <!--
+
+        </Grid>-->
 
-            </Grid>
-      
-      </Grid>
-      
       <!-- Definizione della Grid laterale per bottoni macchina -->
       <Grid Name="MachineButtonGrid" Grid.Row="1">
          <Grid.RowDefinitions>
@@ -180,42 +216,62 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="5*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <!--<ColumnDefinition Width="1*"/>-->
+            <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
 
          <ToggleButton Name="ControlsMachineBtn" Grid.Column="0"
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-            <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+            <Image Source="{DynamicResource ManualImg}" Style="{DynamicResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
 
          <ToggleButton Name="VacuumMachineBtn" Grid.Column="1"
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-            <Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+            <Image Source="{DynamicResource VacuumImg}" Style="{DynamicResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
-          
-          <!--Comando asse X-Y-->
-          <ToggleButton Name="XYBtn" Grid.Column="2"
+
+         <!--Comando asse X-Y-->
+         <ToggleButton Name="XYBtn" Grid.Column="2"
+               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+            <Image Source="{DynamicResource XYJogImg}" Style="{DynamicResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
+
+         <!--Comando asse Z-C-->
+         <ToggleButton Name="ZCBtn" Grid.Column="3"   
+               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+            <Image Source="{DynamicResource ZCJogImg}" Style="{DynamicResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
+
+         <!--Comando asse Z-B-->
+         <ToggleButton Name="ZBBtn" Grid.Column="4"
+               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+            <Image Source="{DynamicResource ZBJogImg}" Style="{DynamicResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
+
+         <!--Comando Remote-->
+         <ToggleButton Name="RemoteBtn" Grid.Column="5"
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
             <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
          </ToggleButton>
-          
-          <!--Comando asse Z-C-->
-          <ToggleButton Name="ZCBtn" Grid.Column="3"   
-               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-              <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
-          </ToggleButton>
 
-          <!--Comando asse Z-B-->
-          <ToggleButton Name="ZBBtn" Grid.Column="4"
-               Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-              <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
-          </ToggleButton>
+         <!--Parking-->
+         <ToggleButton Name="ParkingBtn" Grid.Column="6"
+              Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+            <Image Source="{DynamicResource ParkingImg}" Style="{DynamicResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
 
-            <Button Name="ManualModeBtn" Grid.Column="7"
-               Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+
+
+         <!--Comando Manula/MDI-->
+         <Button Name="ManualModeBtn" Grid.Column="11"
+                Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+            <Image Source="{DynamicResource ManualImg}" Style="{DynamicResource OmagCut_ScaleButtonIcon}"/>
          </Button>
 
       </Grid>

DirectCuts/DirectCutPageUC.xaml.vb

@@ -1,5 +1,4 @@
 Imports EgtUILib
-Imports EgtWPFLib
 
 Public Class DirectCutPageUC
 
@@ -7,18 +6,20 @@ Public Class DirectCutPageUC
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Friend m_MachineButtons As MachineButtonsUC
    Friend m_ManualAxesMove As ManualAxesMoveUC
-   Friend m_SingleCut As SingleCutUC
-   Friend m_SingleDrill As SingleDrillUC
-   ' nuova finestra per i comandi per il taglio manuale nuovo
-   Friend m_SingleCutAuto As SingleCutAuto
-   Friend m_MultipleCut As MultipleCut
-   Friend m_GridCut As GridCut
-   Friend m_FlatteningCut As FlatteningCut
-   Friend m_Polishing As Polishing
-   Friend m_CopyTemplate As CopyTemplateUC
-   Friend m_SawTest As SawTestUC
+
    Friend m_ControlsMachineButton As ControlsMachineButtonUC
    Friend m_VacuumMachineButton As VacuumMachineButtonUC
+   Friend m_ControlsDirectCutUC As ControlsDirectCutUC
+   Friend m_ControlsDirectCutUC1 As ControlsDirectCutUC1
+
+   Friend m_ActiveControl As Controls
+   Enum Controls
+      DirectCutUC
+      DirectCutUC1
+      MachineButtonUC
+      VacuumButtonUC
+   End Enum
+
 
    ' Stato di visualizzazione della macchina
    Friend m_bShowMachine As Boolean = False
@@ -26,8 +27,6 @@ Public Class DirectCutPageUC
    ' Dati generali CN
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
-   ' Riferimento alla pagina correntemente attiva
-   Friend m_ActiveDirectCutPage As DirectCutPages = DirectCutPages.DirectCut
    ' Variabili che indicano attivazione paginette con bottoni macchina
    Private m_ControlsBtn_IsActive As Boolean
 
@@ -41,108 +40,45 @@ Public Class DirectCutPageUC
    ' elenco dei nuovi bottoni
    Private m_ButtonJogList As New List(Of MachineButton)
 
-   Enum DirectCutPages
-      DirectCut
-      ManualAxesMove
-      SingleCut
-      MultipleCut
-      GridCut
-      FlatteningCut
-      Polishing
-      CopyTemplate
-      SawTest
-      SingleCutAuto
-      SingleDrill
-   End Enum
 
    Private Sub DirectCutPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
-      ' leggo la configurazione del programma per i nuovi tagli manuali
-      m_bManulaCut = GetPrivateProfileInt(S_GENERAL, K_MANUAL_CUT, 0, m_MainWindow.GetIniFile()) <> 0
-
       'Creazione delle Page UserControl
       m_MachineButtons = New MachineButtonsUC
       m_ManualAxesMove = New ManualAxesMoveUC
-      m_SingleCut = New SingleCutUC
-      m_SingleDrill = New SingleDrillUC
-      m_MultipleCut = New MultipleCut
-      m_GridCut = New GridCut
-      m_FlatteningCut = New FlatteningCut
-      m_Polishing = New Polishing
-      m_CopyTemplate = New CopyTemplateUC
-      m_SawTest = New SawTestUC
       m_ControlsMachineButton = New ControlsMachineButtonUC
       m_VacuumMachineButton = New VacuumMachineButtonUC
-      ' Costruisco la finestra per il nuovo tipo di taglio manuale
-      m_SingleCutAuto = New SingleCutAuto
+      m_ControlsDirectCutUC = New ControlsDirectCutUC
+      m_ControlsDirectCutUC1 = New ControlsDirectCutUC1
 
       'Posizionemento nella griglia delle Page UserControl
       m_MachineButtons.SetValue(Grid.RowProperty, 2)
-      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 6)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, m_MachineButtons.nCountButton)
       m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
-      If m_bManulaCut Then
-         m_SingleCutAuto.SetValue(Grid.RowProperty, 1)
-      Else
-         m_SingleCut.SetValue(Grid.RowProperty, 1)
-      End If
-      m_SingleDrill.SetValue(Grid.RowProperty, 1)
-      m_MultipleCut.SetValue(Grid.RowProperty, 1)
-      m_GridCut.SetValue(Grid.RowProperty, 1)
-      m_FlatteningCut.SetValue(Grid.RowProperty, 1)
-      m_Polishing.SetValue(Grid.RowProperty, 1)
-      m_CopyTemplate.SetValue(Grid.RowProperty, 1)
-      m_SawTest.SetValue(Grid.RowProperty, 1)
+
+      m_ControlsDirectCutUC.SetValue(Grid.RowProperty, 1)
+      m_ControlsDirectCutUC1.SetValue(Grid.RowProperty, 1)
       m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
       m_VacuumMachineButton.SetValue(Grid.RowProperty, 1)
 
-      Dim bCollapsedNewBottonsConsole As Boolean = False
+      ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [ControlMachButtons])
+      Dim bCollapsedNewBottonsConsole As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons("JogButtons", "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
+      ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [VacuumMachButtons])
+      Dim bCollapsedVacuumButton As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_VACUUMMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       If Not m_NewMachineButtonsType Then
          'Assegno MachineButtons alla pagina
          LowerButtonGrid.Children.Add(m_MachineButtons)
          ControlsMachineBtn.Visibility = Windows.Visibility.Collapsed
          VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
-         ' per le configurazioni diverse dalla Digitale5
-         bCollapsedNewBottonsConsole = True
       End If
-
-      If GetPrivateProfileInt(S_NUMERICALCONTROL, K_TYPE, 0, m_MainWindow.GetMachIniFile()) = 0 Then
-         ManualBtn.IsEnabled = False
-         ManualModeBtn.Visibility = Windows.Visibility.Hidden
+      ' se non sono configurate le ventose allora nascondo il comando
+      If m_NewMachineButtonsType AndAlso bCollapsedVacuumButton Then
+         VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
       End If
 
-      ' ManualBtn.Content = EgtMsg(90201)
-      ManualTxt.Text = EgtMsg(90201)
-      'SingleCutBtn.Content = EgtMsg(90202)
-      SingleCutTxt.Text = EgtMsg(90202)
-      'SingleDrillBtn.Content = "Foro singolo"
-      SingleDrillTxt.Text = EgtMsg(90258)
-      'MultipleCutBtn.Content = EgtMsg(90203)
-      MultipleCutTxt.Text = EgtMsg(90203)
-      'GridCutBtn.Content = EgtMsg(90204)
-      GridCutTxt.Text = EgtMsg(90204)
-      'FlatteningCutBtn.Content = EgtMsg(90206)
-      FlatteningCutTxt.Text = EgtMsg(90206)
-      PolishingBtn.Content = EgtMsg(90231)
-      'CopyTemplateBtn.Content = EgtMsg(90209)
-      CopyTemplateTxt.Text = EgtMsg(90209)
-      SawTestBtn.Content = EgtMsg(90207)
-
-
       ' nuovi bottoni 20/05/2021 - modifica specifiche 04/08/2021
+      ' leggo il numero di assi attivi nella macchina
       Dim AxesNumber = GetPrivateProfileInt(S_AXES, K_AXESNUM, 5, m_MainWindow.GetMachIniFile())
-      Dim x As Integer = GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile())
-      If GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile()) = 1 And Not bCollapsedNewBottonsConsole Then
-         XYBtn.Content = "X - Y"
-         ZCBtn.Content = "Z - C"
-         If AxesNumber < 5 Then
-            ZBBtn.Visibility = Windows.Visibility.Collapsed
-         End If
-         ZBBtn.Content = "Z - B"
-      Else
-         XYBtn.Visibility = Windows.Visibility.Collapsed
-         ZCBtn.Visibility = Windows.Visibility.Collapsed
-         ZBBtn.Visibility = Windows.Visibility.Collapsed
-      End If
 
    End Sub
 
@@ -182,55 +118,17 @@ Public Class DirectCutPageUC
             End If
          End If
       End While
+      ' attivo la visualizzazione dei comandi
+      SetVisibilityJogButtuns()
       ' lo stato di questi comandi vieni carico dalla lettura del PLC (refresh)
       '----------- FINE NUOVI BOTTONI------------
 
-      ' Se rientro da simulazione
-      If m_ActiveDirectCutPage = DirectCutPages.SingleCut Then
-         LeftButtonGrid.Children.Add(m_SingleCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto Then
-         LeftButtonGrid.Children.Add(m_SingleCutAuto)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.MultipleCut Then
-         LeftButtonGrid.Children.Add(m_MultipleCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.GridCut Then
-         LeftButtonGrid.Children.Add(m_GridCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.FlatteningCut Then
-         LeftButtonGrid.Children.Add(m_FlatteningCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.Polishing Then
-         LeftButtonGrid.Children.Add(m_Polishing)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.SawTest Then
-         LeftButtonGrid.Children.Add(m_SawTest)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleDrill Then
-         LeftButtonGrid.Children.Add(m_SingleDrill)
-         Return
-      End If
-
-      ' Caso standard
-      m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      LoadLastDirectCutControls()
 
       ' Se macchina fotografica abilitata
       PhotoBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO)
-
-      ' Attivo le lavorazioni solo se esiste il grezzo
-      Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
-      If m_bManulaCut Then
-         ' anche se non è presente un grezzo mantengo abilitato il bottone
-         SingleCutBtn.IsEnabled = True
-      Else
-         SingleCutBtn.IsEnabled = bRawOk
-      End If
-      MultipleCutBtn.IsEnabled = bRawOk
-      GridCutBtn.IsEnabled = bRawOk
-      FlatteningCutBtn.IsEnabled = bRawOk
-      PolishingBtn.IsEnabled = (bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
-      SawTestBtn.IsEnabled = bRawOk
+      ' aggiorno la visualizzazione dei parametri
+      ReloadParam()
 
       ' Nascondo i pezzi in parcheggio
       HideParkedParts()
@@ -238,6 +136,57 @@ Public Class DirectCutPageUC
 
    End Sub
 
+   Public Sub ReloadParam()
+      Dim sCurrSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sCurrSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim bSaw As Boolean = False
+
+      ' se esiste una lavorazione di lama corrente vuol dire che deve essere preferita
+      If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
+         bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
+      End If
+      If Not bSaw Then
+         EgtOutLog(" WARNING! Impossible to get point from SAW, there isn't SAW or SAWING! It's available only by DRAW")
+      End If
+      m_ControlsDirectCutUC.m_SingleCut.SetEnableParam(bSaw)
+      m_ControlsDirectCutUC.m_MultipleCut.SetEnableParam(bSaw)
+      m_ControlsDirectCutUC.m_GridCut.SetEnableParam(bSaw)
+   End Sub
+
+   Private Sub SetVisibilityJogButtuns()
+      XYBtn.Visibility = Visibility.Collapsed
+      ZCBtn.Visibility = Visibility.Collapsed
+      ZBBtn.Visibility = Visibility.Collapsed
+      RemoteBtn.Visibility = Visibility.Collapsed
+      ParkingBtn.Visibility = Visibility.Collapsed
+
+      Dim Item As MachineButton = Nothing
+      For Each Item In m_ButtonJogList
+         Select Case Item.StateFlag.Trim
+            Case K_XYJOG
+               XYBtn.Visibility = Visibility.Visible
+               XYBtn.Foreground = Brushes.White
+               XYBtn.ToolTip = "X - Y"
+            Case K_ZCJOG
+               ZCBtn.Visibility = Visibility.Visible
+               ZCBtn.Foreground = Brushes.White
+               ZCBtn.ToolTip = "Z - C"
+            Case K_ZBJOG
+               ZBBtn.Visibility = Visibility.Visible
+               ZBBtn.Foreground = Brushes.White
+               ZBBtn.ToolTip = "Z - B"
+            Case K_REMOTE
+               RemoteBtn.Visibility = Visibility.Visible
+               RemoteBtn.Foreground = Brushes.White
+               RemoteBtn.Content = EgtMsg(90262)      'Remote
+            Case K_PARKING
+               ParkingBtn.Visibility = Visibility.Visible
+               ParkingBtn.Foreground = Brushes.White
+               ParkingBtn.ToolTip = EgtMsg(90263)     'Parking
+         End Select
+      Next
+   End Sub
+
    Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Se macchina fotografica collegata, faccio una foto
@@ -262,63 +211,13 @@ Public Class DirectCutPageUC
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
    End Sub
 
-   Private Sub ManualBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualBtn.Click
-      LeftButtonGrid.Children.Add(m_ManualAxesMove)
-      m_ActiveDirectCutPage = DirectCutPages.ManualAxesMove
-   End Sub
-
-   Private Sub SingleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleCutBtn.Click
-      If m_bManulaCut Then
-         LeftButtonGrid.Children.Add(m_SingleCutAuto)
-         m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto
-      Else
-         LeftButtonGrid.Children.Add(m_SingleCut)
-         m_ActiveDirectCutPage = DirectCutPages.SingleCut
-      End If
-
-   End Sub
-
-   Private Sub MultipleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles MultipleCutBtn.Click
-      LeftButtonGrid.Children.Add(m_MultipleCut)
-      m_ActiveDirectCutPage = DirectCutPages.MultipleCut
-   End Sub
-
-   Private Sub GridCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles GridCutBtn.Click
-      LeftButtonGrid.Children.Add(m_GridCut)
-      m_ActiveDirectCutPage = DirectCutPages.GridCut
-   End Sub
-
-   Private Sub FlatteningCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles FlatteningCutBtn.Click
-      LeftButtonGrid.Children.Add(m_FlatteningCut)
-      m_ActiveDirectCutPage = DirectCutPages.FlatteningCut
-   End Sub
-
-   Private Sub PolishingBtn_Click(sender As Object, e As RoutedEventArgs) Handles PolishingBtn.Click
-      LeftButtonGrid.Children.Add(m_Polishing)
-      m_ActiveDirectCutPage = DirectCutPages.Polishing
-   End Sub
-
-   Private Sub CopyTemplateBtn_Click(sender As Object, e As RoutedEventArgs) Handles CopyTemplateBtn.Click
-      LeftButtonGrid.Children.Add(m_CopyTemplate)
-      m_ActiveDirectCutPage = DirectCutPages.CopyTemplate
-   End Sub
-
-   Private Sub SawTestBtn_Click(sender As Object, e As RoutedEventArgs) Handles SawTestBtn.Click
-      LeftButtonGrid.Children.Add(m_SawTest)
-      m_ActiveDirectCutPage = DirectCutPages.SawTest
-   End Sub
-
-   Private Sub SingleDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleDrillBtn.Click
-      LeftButtonGrid.Children.Add(m_SingleDrill)
-      m_ActiveDirectCutPage = DirectCutPages.SingleDrill
-   End Sub
-
    Private Sub ControlsMachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles ControlsMachineBtn.Click
       If ControlsMachineBtn.IsChecked Then
          m_ControlsMachineButton = New ControlsMachineButtonUC
          m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
          m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
          MachineButtonGrid.Children.Add(m_ControlsMachineButton)
+         m_ActiveControl = Controls.MachineButtonUC
          If VacuumMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
             VacuumMachineBtn.IsChecked = False
@@ -331,6 +230,7 @@ Public Class DirectCutPageUC
    Private Sub VacuumMachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles VacuumMachineBtn.Click
       If VacuumMachineBtn.IsChecked Then
          MachineButtonGrid.Children.Add(m_VacuumMachineButton)
+         m_ActiveControl = Controls.VacuumButtonUC
          If ControlsMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
             ControlsMachineBtn.IsChecked = False
@@ -340,11 +240,34 @@ Public Class DirectCutPageUC
       End If
    End Sub
 
-   '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
+   Friend Sub LoadDirectCutUC()
+      ManageControls()
+      m_ActiveControl = Controls.DirectCutUC
+      MachineButtonGrid.Children.Add(m_ControlsDirectCutUC)
+   End Sub
+
+   Friend Sub LoadDirectCutUC1()
+      ManageControls()
+      m_ActiveControl = Controls.DirectCutUC1
+      MachineButtonGrid.Children.Add(m_ControlsDirectCutUC1)
+   End Sub
+
+
+#Region "[JogButtons]"
+
    Private Sub XYBtn_Click(sender As Object, e As RoutedEventArgs) Handles XYBtn.Click
-      Dim XYJogButton As MachineButton = m_ButtonJogList(0)
+      ' riverco in elenco il bottone XYJog
+      Dim XYJogButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_XYJOG Then
+            XYJogButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(XYJogButton) Then Return
       ' eseguo lo script lua associato
-      XYJogButton.ExecuteMDICommand(XYJogButton.TLuaScriptName)
+      VarMdiCommand.ExecuteMDICommand(XYJogButton.TLuaScriptName)
       ' che comunica al PLC di cambiare lo stato, la modifica dello stato è intercettata dalla funzione Refresh che avvia il metodo Changed
    End Sub
 
@@ -365,9 +288,18 @@ Public Class DirectCutPageUC
    End Sub
 
    Private Sub ZCBtn_Click(sender As Object, e As RoutedEventArgs) Handles ZCBtn.Click
-      Dim ZJogButton As MachineButton = m_ButtonJogList(1)
+      ' riverco in elenco il bottone ZCYJog
+      Dim ZJogButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_ZCJOG Then
+            ZJogButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(ZJogButton) Then Return
       ' eseguo lo script lua associato
-      ZJogButton.ExecuteMDICommand(ZJogButton.TLuaScriptName)
+      VarMdiCommand.ExecuteMDICommand(ZJogButton.TLuaScriptName)
    End Sub
 
    Friend Sub ZCJogChanged(bZAxes As Boolean)
@@ -386,9 +318,18 @@ Public Class DirectCutPageUC
    End Sub
 
    Private Sub ZBBtn_Click(sender As Object, e As RoutedEventArgs) Handles ZBBtn.Click
-      Dim BCJogButton As MachineButton = m_ButtonJogList(2)
+      ' riverco in elenco il bottone ZCYJog
+      Dim ZBJogButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_ZBJOG Then
+            ZBJogButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(ZBJogButton) Then Return
       ' eseguo lo script lua associato
-      BCJogButton.ExecuteMDICommand(BCJogButton.TLuaScriptName)
+      VarMdiCommand.ExecuteMDICommand(ZBJogButton.TLuaScriptName)
    End Sub
 
    Friend Sub ZBJogChanged(bBCAxes As Boolean)
@@ -405,17 +346,95 @@ Public Class DirectCutPageUC
          ZBBtn.IsChecked = bBCAxes
       End If
    End Sub
-   '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
+
+   Private Sub RemoteBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemoteBtn.Click
+      Dim RemoteButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_REMOTE Then
+            RemoteButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(RemoteButton) Then Return
+      ' eseguo lo script lua associato
+      Dim CurrentBtn As Primitives.ToggleButton = e.Source
+      Dim sLuaFileName As String = String.Empty
+      ' verifico lo stato del bottone per avviare il giusto script
+      If CurrentBtn.IsChecked() Then
+         sLuaFileName = RemoteButton.TLuaScriptName
+      Else
+         sLuaFileName = RemoteButton.FLuaScriptName
+      End If
+      VarMdiCommand.ExecuteMDICommand(sLuaFileName)
+   End Sub
+
+   Friend Sub RemoteChanged(bRemote As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim RemoteButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonJogList
+         If MachineButton.StateFlag.Trim = K_REMOTE Then
+            RemoteButton = MachineButton
+            Exit For
+         End If
+      Next
+      If Not IsNothing(RemoteButton) Then
+         RemoteButton.SetIsChecked(bRemote)
+         RemoteBtn.IsChecked = bRemote
+      End If
+   End Sub
+
+   Private Sub ParkingBtn_Click(sender As Object, e As RoutedEventArgs) Handles ParkingBtn.Click
+      Dim ParkingButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_PARKING Then
+            ParkingButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(ParkingButton) Then Return
+      ' eseguo lo script lua associato
+      Dim CurrentBtn As Primitives.ToggleButton = e.Source
+      Dim sLuaFileName As String = String.Empty
+      ' verifico lo stato del bottone per avviare il giusto script
+      If CurrentBtn.IsChecked() Then
+         sLuaFileName = ParkingButton.TLuaScriptName
+      Else
+         sLuaFileName = ParkingButton.FLuaScriptName
+      End If
+      VarMdiCommand.ExecuteMDICommand(sLuaFileName)
+   End Sub
+
+   Friend Sub ParkingStateChanged(bParkingState As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim ParkingButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonJogList
+         If MachineButton.StateFlag.Trim = K_PARKING Then
+            ParkingButton = MachineButton
+            Exit For
+         End If
+      Next
+      If Not IsNothing(ParkingButton) Then
+         ParkingButton.SetIsChecked(bParkingState)
+         ParkingButton.IsChecked = bParkingState
+      End If
+   End Sub
+
+#End Region    '[JogButtons]
+
    Private Sub MachViewModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachViewModeBtn.Click
       If m_bShowMachine Then
          ' aggiorno lo stato
          Select Case m_nMachLook
-         Case MCH_LOOK.ALL
-            m_nMachLook = MCH_LOOK.TAB_HEAD
-         Case MCH_LOOK.TAB_HEAD
-            m_nMachLook = MCH_LOOK.TAB_TOOL
-         Case Else
-            m_nMachLook = MCH_LOOK.ALL
+            Case MCH_LOOK.ALL
+               m_nMachLook = MCH_LOOK.TAB_HEAD
+            Case MCH_LOOK.TAB_HEAD
+               m_nMachLook = MCH_LOOK.TAB_TOOL
+            Case MCH_LOOK.TAB_TOOL
+               m_nMachLook = MCH_LOOK.TAB
+            Case Else
+               m_nMachLook = MCH_LOOK.ALL
          End Select
          ' aggiorno lo stato della macchina e la sua visualizzazione
          EgtSetMachineLook(m_nMachLook)
@@ -424,162 +443,46 @@ Public Class DirectCutPageUC
    End Sub
 
    Friend Sub DirectCutPage_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
-      Select Case m_ActiveDirectCutPage
-         Case DirectCutPages.DirectCut Or DirectCutPages.ManualAxesMove
-            ' Non è necessario fare alcunché
-         Case DirectCutPages.SingleCut
-            LeftButtonGrid.Children.Remove(m_SingleCut)
-         Case DirectCutPages.SingleCutAuto
-            LeftButtonGrid.Children.Remove(m_SingleCutAuto)
-         Case DirectCutPages.MultipleCut
-            LeftButtonGrid.Children.Remove(m_MultipleCut)
-         Case DirectCutPages.GridCut
-            LeftButtonGrid.Children.Remove(m_GridCut)
-         Case DirectCutPages.FlatteningCut
-            LeftButtonGrid.Children.Remove(m_FlatteningCut)
-         Case DirectCutPages.Polishing
-            LeftButtonGrid.Children.Remove(m_Polishing)
-         Case DirectCutPages.CopyTemplate
-            LeftButtonGrid.Children.Remove(m_CopyTemplate)
-         Case DirectCutPages.SawTest
-            LeftButtonGrid.Children.Remove(m_SawTest)
-         Case DirectCutPages.SingleDrill
-            LeftButtonGrid.Children.Remove(m_SingleDrill)
+      ManageControls()
+   End Sub
+
+   Friend Sub ManageControls()
+      Select Case m_ActiveControl
+         Case Controls.DirectCutUC
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            m_ControlsDirectCutUC.DirectCutPage_Unloaded(Nothing, Nothing)
+         Case Controls.DirectCutUC1
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC1)
+            m_ControlsDirectCutUC1.DirectCutPage_Unloaded(Nothing, Nothing)
+         Case Controls.MachineButtonUC
+            MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC1)
+            ControlsMachineBtn.IsChecked = False
+         Case Controls.VacuumButtonUC
+            MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
+            VacuumMachineBtn.IsChecked = False
+      End Select
+   End Sub
+
+   Friend Sub LoadLastDirectCutControls()
+      Select Case m_ActiveControl
+         Case Controls.DirectCutUC
+            MachineButtonGrid.Children.Add(m_ControlsDirectCutUC)
+         Case Controls.DirectCutUC1
+            MachineButtonGrid.Children.Add(m_ControlsDirectCutUC1)
+         Case Else
+            m_ActiveControl = Controls.DirectCutUC
+            MachineButtonGrid.Children.Add(m_ControlsDirectCutUC)
       End Select
-      If ControlsMachineBtn.IsChecked Then
-         MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
-         ControlsMachineBtn.IsChecked = False
-      End If
-      If VacuumMachineBtn.IsChecked Then
-         MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
-         VacuumMachineBtn.IsChecked = False
-      End If
    End Sub
 
    Private Sub ManualModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualModeBtn.Click
       ' Imposto modalità manuale della macchina
-      Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
+      Dim nResult As Short = m_MainWindow.m_DirectCutPageUC.m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
 
    End Sub
 
-   '' ------------------------ GESTIONE SECONDA PAGINA ------------------------
-   'Private Sub ClearButton(nCount As Integer)
-   '   Dim nEndIndex As Integer
-   '   If m_bIsFirstPage Then
-   '      nEndIndex = If(nCount < 8, nCount, 8)
-   '   Else
-   '      nEndIndex = If(nCount < 16, nCount - 8, 8)
-   '   End If
-   '   For index As Integer = 1 To nEndIndex
-   '      GetLabel(index).Text = String.Empty
-   '      GetImage(index).Source = Nothing
-   '      GetButton(index).Visibility = Windows.Visibility.Visible
-   '   Next
-   '   For index As Integer = nEndIndex + 1 To 8
-   '      GetLabel(index).Text = String.Empty
-   '      GetImage(index).Source = Nothing
-   '      GetButton(index).Visibility = Windows.Visibility.Hidden
-   '   Next
-   'End Sub
-
-   'Private Sub LoadPage()
-   '   Dim nDeltaSecondPage As Integer = 8
-   '   ' Leggo numero di componenti presenti
-   '   Dim nCompoNumber As Integer = GetPrivateProfileInt("Compo", "Count", 0, m_MainWindow.GetIniFile())
-   '   ' Calcolo indici a seconda della pagina in cui sono
-   '   If m_bIsFirstPage Then
-   '      ClearButton(nCompoNumber)
-   '      nDeltaSecondPage = 0
-   '   Else
-   '      ClearButton(nCompoNumber)
-   '      nDeltaSecondPage = 8
-   '   End If
-
-   '   ' Creazione converter da String a ImageSource
-   '   Dim ImageConverter As New ImageSourceConverter
-   '   Dim ThicknessConverter As New ThicknessConverter
-
-   '   'Assegnazione immagine e testo ai Button
-   '   For index As Integer = 1 To 8
-   '      Dim CustomThickness As New Thickness(0)
-   '      Dim nCompoName As Integer = GetPrivateProfileInt("Compo" & index + nDeltaSecondPage, "Name", 0, m_MainWindow.GetIniFile())
-   '      Dim sCompoImage As String = ""
-   '      Dim sCompoImageSource As ImageSource
-
-   '      'verifico presenza immagine e la aggiungo
-   '      If GetPrivateProfileString("Compo" & index + nDeltaSecondPage, "Image", "", sCompoImage, m_MainWindow.GetIniFile()) <> 0 Then
-   '         Try
-   '            sCompoImageSource = ImageConverter.ConvertFromString(m_MainWindow.GetResourcesDir() & "\" & sCompoImage)
-   '            GetImage(index).Height = 65
-   '            GetImage(index).Width = 65
-   '            GetImage(index).Source = sCompoImageSource
-   '         Catch ex As Exception
-   '            EgtOutLog("Error loading image " & sCompoImage)
-   '            sCompoImage = String.Empty
-   '            GetImage(index).Height = 0
-   '            GetImage(index).Width = 0
-   '            CustomThickness.Right = 0
-   '            GetImage(index).Margin = CustomThickness
-   '         End Try
-   '      Else
-   '         'Se non c'è l'immagine azzero la distanza tra testo e immagine
-   '         CustomThickness.Right = 0
-   '         GetImage(index).Margin = CustomThickness
-   '      End If
-
-   '      'verifico presenza testo
-   '      If nCompoName > 0 Then
-   '         Dim sCompoName As String = EgtMsg(MSG_COMPONENTPAGEUC + nCompoName)
-   '         'verifico presenza immagine
-   '         If sCompoImage.Length > 0 Then
-   '            'se la lunghezza del testo è maggiore di 15 lo taglio
-   '            If sCompoName.Length > 15 Then
-   '               sCompoName = sCompoName.Substring(0, 15)
-   '            End If
-   '            GetLabel(index).Text = sCompoName
-   '            'Se ci sono sia testo che immagine imposto un margine di 10
-   '            CustomThickness.Right = 10
-   '            GetImage(index).Margin = CustomThickness
-   '         Else
-   '            'se l'immagine non c'è e il testo è maggiore di 20 lo taglio
-   '            If sCompoName.Length > 20 Then
-   '               sCompoName = sCompoName.Substring(0, 20)
-   '            End If
-   '            GetLabel(index).Text = sCompoName
-   '         End If
-   '      Else
-   '         'Se non c'è testo azzero la distanza tra testo e immagine
-   '         CustomThickness.Right = 0
-   '         GetImage(index).Margin = CustomThickness
-   '      End If
-
-   '   Next
-
-   'End Sub
-
-   '' Gestione bottone altri componenti
-   'Private Sub Compo9_Click(sender As Object, e As RoutedEventArgs) Handles Compo9.Click
-   '   If m_bIsFirstPage Then
-   '      m_bIsFirstPage = False
-   '      LoadPage()
-   '      'Compo9.SetValue(Grid.ColumnProperty, 1)
-   '      'Compo9.SetValue(Grid.ColumnSpanProperty, 1)
-   '      'ImageCompo9.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NumericKeyboardArrow.png", UriKind.Relative))
-   '      'ImageCompo9.Visibility = Windows.Visibility.Visible
-   '      'LabelCompo9.Visibility = Windows.Visibility.Hidden
-   '      Compo9.SetValue(Grid.ColumnProperty, 0)
-   '      Compo9.SetValue(Grid.ColumnSpanProperty, 2)
-   '      ImageCompo9.Visibility = Windows.Visibility.Hidden
-   '      LabelCompo9.Visibility = Windows.Visibility.Visible
-   '   Else
-   '      m_bIsFirstPage = True
-   '      LoadPage()
-   '      Compo9.SetValue(Grid.ColumnProperty, 0)
-   '      Compo9.SetValue(Grid.ColumnSpanProperty, 2)
-   '      ImageCompo9.Visibility = Windows.Visibility.Hidden
-   '      LabelCompo9.Visibility = Windows.Visibility.Visible
-   '   End If
-   'End Sub
-
-
 End Class

DirectCuts/FlatteningCut.xaml

@@ -1,11 +1,10 @@
 <UserControl x:Class="FlatteningCut"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   mc:Ignorable="d" 
-   d:DesignHeight="597.3" d:DesignWidth="256">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             mc:Ignorable="d" d:DesignHeight="597.3" d:DesignWidth="256">
 
    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
@@ -28,7 +27,7 @@
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/> 
+            <RowDefinition Height="0.5*"/>
             <RowDefinition Height="1*"/>
          </Grid.RowDefinitions>
 
@@ -39,84 +38,135 @@
             </Grid.ColumnDefinitions>
 
             <ToggleButton Name="Point1Btn" Grid.Column="0"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                          Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
             <ToggleButton Name="Point2Btn" Grid.Column="1"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                          Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
 
          </Grid>
 
-         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
 
-         <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+         <ScrollViewer VerticalScrollBarVisibility="Visible" Visibility="Visible"
+                       Grid.Row="1" Grid.RowSpan="11" Grid.ColumnSpan="2">
 
-         <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            <Grid Name="DatiTaglioGrid" >
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="1*"/>
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="0.1"/>
+                  <RowDefinition Height="40"/>
+                  <RowDefinition Height="40"/>
+                  <RowDefinition Height="40"/>
+                  <RowDefinition Height="40"/>
+                  <RowDefinition Height="40"/>
+                  <RowDefinition Height="40"/>
+                  <RowDefinition Height="40"/>
+                  <RowDefinition Height="40"/>
+                  <RowDefinition Height="40"/>
+                  <RowDefinition Height="40"/>
+                  <RowDefinition Height="40"/>
+                  <RowDefinition Height="40"/>
+                  <RowDefinition Height="40"/>
+                  <RowDefinition Height="0.1"/>
+               </Grid.RowDefinitions>
 
-         <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+               <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                  <ComboBox.ItemTemplate>
+                     <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                     </DataTemplate>
+                  </ComboBox.ItemTemplate>
+               </ComboBox>
 
-         <TextBlock Name="WidthTxBl" Grid.Column="0" Grid.Row="5"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+               <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
+                          Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+               <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OverlapTxBl" Grid.Column="0" Grid.Row="6"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OverlapTxBx" Grid.Column="1" Grid.Row="6" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+               <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
+                          Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+               <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-            <TextBlock Name="ZReleasedTxBl" Grid.Column="0" Grid.Row="7"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="ZReleasedTxBx" Grid.Column="1" Grid.Row="7" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>          
+               <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"
+                          Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+               <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="SideTxBl" Grid.Row="8" Grid.ColumnSpan="2"
-             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="SideChBx" Grid.Row="8" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
-             HorizontalAlignment="Right" Margin="0,0,6,0"/>
+               <TextBlock Name="WidthTxBl" Grid.Column="0" Grid.Row="5"
+                          Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+               <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <ComboBox Name="TypeCmBx" Grid.Row="9" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+               <TextBlock Name="OverlapTxBl" Grid.Column="0" Grid.Row="6"
+                          Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+               <EgtWPFLib:EgtTextBox Name="OverlapTxBx" Grid.Column="1" Grid.Row="6" Margin="0,0,6,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="RotLockTxBl" Grid.Row="10" Grid.ColumnSpan="2"
-             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="RotLockChBx" Grid.Row="10" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
-             HorizontalAlignment="Right" Margin="0,0,6,0"/>
+               <TextBlock Name="ZReleasedTxBl" Grid.Column="0" Grid.Row="7"
+                          Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+               <EgtWPFLib:EgtTextBox Name="ZReleasedTxBx" Grid.Column="1" Grid.Row="7" Margin="0,0,6,0"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <Grid Grid.Row="11" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-            <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-         </Grid>
+               <TextBlock Name="SideTxBl" Grid.Row="8" Grid.ColumnSpan="2"
+                          Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+               <CheckBox Name="SideChBx" Grid.Row="8" Grid.ColumnSpan="2" 
+                         Style="{DynamicResource OmagCut_CheckBox_Single}"
+                         HorizontalAlignment="Right" Margin="0,0,6,0"/>
+
+               <ComboBox Name="TypeCmBx" Grid.Row="9" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                  <ComboBox.ItemTemplate>
+                     <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                     </DataTemplate>
+                  </ComboBox.ItemTemplate>
+               </ComboBox>
+
+               <TextBlock Name="RotLockTxBl" Grid.Row="10" Grid.ColumnSpan="2"
+                          Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+               <CheckBox Name="RotLockChBx" Grid.Row="10" Grid.ColumnSpan="2" 
+                         Style="{DynamicResource OmagCut_CheckBox_Single}"
+                         HorizontalAlignment="Right" Margin="0,0,6,0"/>
+
+               <TextBlock Name="ChainedPathTxBl" Grid.Row="11" Grid.ColumnSpan="2"
+                          Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+               <CheckBox Name="ChainedPathChBx" Grid.Row="11" Grid.ColumnSpan="2" 
+                         Style="{DynamicResource OmagCut_CheckBox_Single}"
+                         HorizontalAlignment="Right" Margin="0,0,6,0"/>
+
+               <ComboBox Name="SelToolCmBx" Grid.Row="12" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                  <ComboBox.ItemTemplate>
+                     <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                     </DataTemplate>
+                  </ComboBox.ItemTemplate>
+               </ComboBox>
+
+               <Grid Grid.Row="13" Grid.ColumnSpan="2">
+                  <Grid.ColumnDefinitions>
+                     <ColumnDefinition Width="0.5*"/>
+                     <ColumnDefinition Width="1*"/>
+                     <ColumnDefinition Width="0.5*"/>
+                     <ColumnDefinition Width="1*"/>
+                  </Grid.ColumnDefinitions>
+                  <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+                             Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                  <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                  <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+                             Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                  <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+               </Grid>
+
+            </Grid>
+         </ScrollViewer>
 
          <Grid Grid.Row="12" Grid.ColumnSpan="2">
             <Grid.ColumnDefinitions>
@@ -125,10 +175,14 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource SimulaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource EseguiImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
             <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
          </Grid>
 

DirectCuts/FlatteningCut.xaml.vb

@@ -1,4 +1,6 @@
 Imports EgtUILib
+Imports EgtUILib.EgtInterface
+Imports OmagCUT.MainWindow
 
 Public Class FlatteningCut
 
@@ -9,6 +11,8 @@ Public Class FlatteningCut
    Private m_bActive As Boolean = False
    ' Flag di simulazione in corso
    Private m_bSimul As Boolean = False
+   ' Definizione del taglio diretto di questa pagina
+   Private Const FLATTENING As String = "Flattening"
 
    ' Origine tavola e dati grezzo
    Private m_bRawOk As Boolean = False
@@ -35,14 +39,18 @@ Public Class FlatteningCut
    Private m_bHeadSide As Boolean = False
    Private m_nMachType As Integer = 1
    Private m_bRotLock As Boolean = False
+   Private m_bChainedPath As Boolean = True
+   Private m_nTool As Integer = 0
    ' Array delle modalità di acquisizione dei punti
    Private m_PointsModeArray(2) As String
    ' Array delle tipologia di lavorazione della spianatura
-   Private m_TypeArray(1) As String
+   Private m_TypeArray(2) As String
    ' Punto selezionato nel disegno
    Private m_ptPrev As Point3d
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
+   ' Array degliutensili disponibili (lama e fresa)
+   Private m_ToolsArray(1) As String
 
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
@@ -57,8 +65,9 @@ Public Class FlatteningCut
    End Enum
    ' Costanti che indicano la tipologia di lavorazione della spianatura
    Private Enum MACH_TYPE As Integer
-      ONEWAY = 0
-      ZIGZAG = 1
+      ZIGZAG = 0
+      ONEWAY = 1
+      SPIRAL = 2
    End Enum
    'Costante che indica il lato in cui posizionare i tagli
    Private Enum CutSide As Integer
@@ -66,42 +75,56 @@ Public Class FlatteningCut
       Right
    End Enum
 
+   Private Enum TOOL As Integer
+      SAW = 0
+      MILL = 1
+   End Enum
+
+   ' Per abilitare la spianatura con la FRESA deve essere imposatato a TRUE il flag "Usa Fresa" nella pagina MACCHINA (campo INCISIONI)
    Private Sub FlatteningCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
-      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
-      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(MSG_DIRECTCUTPAGEUC + 12)
-      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 25)
+      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(90224)     ' Lama
+      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(90212)   ' Laser
+      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(90225)    ' Disegno
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' Creo lista tipo lavorazione
-      m_TypeArray(MACH_TYPE.ONEWAY) = EgtMsg(MSG_COMBOBOXPARAM + 39)
-      m_TypeArray(MACH_TYPE.ZIGZAG) = EgtMsg(MSG_COMBOBOXPARAM + 38)
+      m_TypeArray(MACH_TYPE.ZIGZAG) = EgtMsg(90838)      ' ZigZag
+      m_TypeArray(MACH_TYPE.ONEWAY) = EgtMsg(90839)      ' OneWay
+      m_TypeArray(MACH_TYPE.SPIRAL) = EgtMsg(90851)      ' Spirale
       ' la associo alla combobox
       TypeCmBx.ItemsSource = m_TypeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
-      DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
-      LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
-      DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
-      WidthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 26)
-      OverlapTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 27)
-      ZReleasedTxBl.Text = "Z Svincolo"
-      SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
-      RotLockTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 29)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      Point1Btn.ToolTip = EgtMsg(90210)                  ' Acquisisci P1
+      Point2Btn.ToolTip = EgtMsg(90211)                  ' Acquisisci P2
+      DepthTxBl.Text = EgtMsg(90213)                     ' Affondamento
+      LenghtTxBl.Text = EgtMsg(90214)                    ' Lunghezza
+      DirectionTxBl.Text = EgtMsg(90215)                 ' Direzione
+      WidthTxBl.Text = EgtMsg(90226)                     ' Larghezza
+      OverlapTxBl.Text = EgtMsg(90227)                   ' Sovrapposizione
+      ZReleasedTxBl.Text = EgtMsg(91235)                 ' Z Svincolo
+      SideTxBl.Text = EgtMsg(90223)                      ' Tagli lato motore
+      RotLockTxBl.Text = EgtMsg(90229)                   ' Blocca Asse C
+      ChainedPathTxBl.Text = EgtMsg(91236)               ' Chained path
+      SimulBtn.ToolTip = EgtMsg(90301)                   ' Simula
+      OkBtn.ToolTip = EgtMsg(90230)                      ' Esegui
+      ' tipo di utensile in uso per la lavorazione
+      m_ToolsArray(TOOL.SAW) = EgtMsg(90224)             ' Lama
+      m_ToolsArray(TOOL.MILL) = EgtMsg(91237)            ' Fresa
+      SelToolCmBx.ItemsSource = m_ToolsArray
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_LENGTH, m_dLen, m_MainWindow.GetIniFile())
-      m_dWid = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_WIDTH, m_dWid, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dLen = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_LENGTH, m_dLen, m_MainWindow.GetIniFile())
+      m_dWid = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_WIDTH, m_dWid, m_MainWindow.GetIniFile())
       m_dOverlap = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_OVERLAP, m_dOverlap, m_MainWindow.GetIniFile())
       m_dZReleased = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, m_dZReleased, m_MainWindow.GetIniFile())
       m_bHeadSide = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_nMachType = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType, m_MainWindow.GetIniFile())
-      m_bRotLock = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_nMachType = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType, m_MainWindow.GetIniFile())
+      m_bRotLock = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_bChainedPath = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLAT_CHAINEDPATH, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_nTool = GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile())
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
       m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
    End Sub
 
@@ -124,16 +147,16 @@ Public Class FlatteningCut
       ' Disabilito registrazione progetto modificato
       EgtDisableModified()
       ' Creo layer temporaneo per crocette
-      m_nTempLay = EgtCreateGroup( GDB_ID.ROOT)
-      EgtSetLevel( m_nTempLay, GDB_LV.TEMP)
+      m_nTempLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
       ' Origine tavola
       m_bRawOk = True
-      If Not EgtGetTableRef( 1, m_ptTabOri) Then
+      If Not EgtGetTableRef(1, m_ptTabOri) Then
          m_bRawOk = False
          EgtOutLog("Error on TableRef1")
       End If
       ' Dati del grezzo
-      If Not GetRawBox( m_ptRawMin, m_ptRawMax) Then
+      If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then
          m_bRawOk = False
          EgtOutLog("Error on RawBox")
       End If
@@ -141,7 +164,7 @@ Public Class FlatteningCut
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -150,10 +173,10 @@ Public Class FlatteningCut
       SetCoordVisibility(True)
       ShowCoord()
       ' Assegno parametri di lavorazione già definiti
-      DepthTxBx.Text = LenToString( m_dDepth, 1)
-      DirectionTxBx.Text = DoubleToString( m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
-      LenghtTxBx.Text = LenToString( m_dLen, 1)
-      WidthTxBx.Text = LenToString( m_dWid, 2)
+      DepthTxBx.Text = LenToString(m_dDepth, 1)
+      DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+      LenghtTxBx.Text = LenToString(m_dLen, 1)
+      WidthTxBx.Text = LenToString(m_dWid, 2)
       OverlapTxBx.Text = LenToString(m_dOverlap, 2)
       ZReleasedTxBx.Text = LenToString(m_dZReleased, 2)
       ' carico la quota di svincolo per la spianatura
@@ -162,6 +185,9 @@ Public Class FlatteningCut
       SideChBx.IsChecked = m_bHeadSide
       TypeCmBx.SelectedIndex = m_nMachType
       RotLockChBx.IsChecked = m_bRotLock
+      ChainedPathChBx.IsChecked = m_bChainedPath
+      ' Assegno l'utensile definito in macchina per la fresatura
+      SelToolCmBx.SelectedIndex = m_nTool
       ' Reset taglio e disabilito bottone esecuzione
       m_bCutOk = False
       UpdateSimulOkBtn()
@@ -175,21 +201,24 @@ Public Class FlatteningCut
 
    Friend Sub FlatteningCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_LENGTH, DoubleToString( m_dLen, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_WIDTH, DoubleToString( m_dWid, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_OVERLAP, DoubleToString(m_dOverlap, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, DoubleToString(m_dZReleased, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, If( m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If( m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString( m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_LENGTH, DoubleToString(m_dLen, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_WIDTH, DoubleToString(m_dWid, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_OVERLAP, DoubleToString(m_dOverlap, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, DoubleToString(m_dZReleased, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, If(m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If(m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
       ' Se non vado in simulazione
       If Not m_bSimul Then
+         ' imposto la Z di sicurezza corretta
+         EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
+         EgtMdbSave()
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -264,30 +293,43 @@ Public Class FlatteningCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      If bIsMultiCut Then
+         EgtSetCalcTool(sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Altrimenti da lama
          Else
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -304,8 +346,6 @@ Public Class FlatteningCut
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Imposto la lama corrente
          If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
       End If
@@ -335,27 +375,40 @@ Public Class FlatteningCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      If bIsMultiCut Then
+         EgtSetCalcTool(sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Altrimenti da lama
          Else
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
          If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
@@ -363,15 +416,13 @@ Public Class FlatteningCut
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
 
-      ' Altrimenti da disegno
+         ' Altrimenti da disegno
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Imposto la lama corrente
          If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
       End If
@@ -405,7 +456,7 @@ Public Class FlatteningCut
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -442,11 +493,9 @@ Public Class FlatteningCut
       ' Recupero il valore di larghezza impostato
       Dim dWidth As Double = 0
       StringToLen(WidthTxBx.Text, dWidth)
-      ' Recupero lo spessore della lama corrente
-      EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw)
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
-      ' La larghezza della spianatura nono può essere inferiore allo spessore della lama
+      ' Recupero l'impronta dell'utensile corrente
+      Dim dThick As Double = GetToolFootprint()
+      ' La larghezza della spianatura non può essere inferiore all'impronta dell'utensile (spessore per lama, diametro per fresa)
       m_dWid = Math.Max(dWidth, dThick)
       WidthTxBx.Text = LenToString(m_dWid, 2)
       ' Disegno il taglio
@@ -472,8 +521,7 @@ Public Class FlatteningCut
 
    Private Sub OverlapTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OverlapTxBx.EgtClosed
       ' Recupero spessore della lama correntemente attiva
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      Dim dThick As Double = GetToolFootprint()
       '  Verifico che la sovrapposizione non sia superiore allo spessore della lama (meno 1mm di offset)
       Dim dOverlap As Double = 0
       Const MIN_OFFSET As Double = 1.0
@@ -520,6 +568,16 @@ Public Class FlatteningCut
       EgtDraw()
    End Sub
 
+   Private Sub SelToolCmBx_SelectionChanged(sender As Object, e As EventArgs) Handles SelToolCmBx.SelectionChanged
+      m_nTool = SelToolCmBx.SelectedIndex
+      ' Disabilito il concatenamento
+      ChainedPathChBx.IsEnabled = (m_nTool = TOOL.MILL)
+      ' Disegno il taglio
+      CreateFlatteningCut()
+      SetMachineInCurrPos()
+      EgtDraw()
+   End Sub
+
    Private Sub RotLockChBx_Click(sender As Object, e As EventArgs) Handles RotLockChBx.Click
       m_bRotLock = RotLockChBx.IsChecked
       ' Disegno il taglio
@@ -528,6 +586,14 @@ Public Class FlatteningCut
       EgtDraw()
    End Sub
 
+   Private Sub ChainedPathChBx_Click(sender As Object, e As EventArgs) Handles ChainedPathChBx.Click
+      m_bChainedPath = ChainedPathChBx.IsChecked
+      ' Disegno il taglio
+      CreateFlatteningCut()
+      SetMachineInCurrPos()
+      EgtDraw()
+   End Sub
+
    Private Sub XcoordTxBx_EgtClosed(sender As Object, e As EventArgs) Handles XcoordTxBx.EgtClosed
       ' Recupero il valore della coordinata (in 0 Tab)
       Dim dXcoord As Double = 0
@@ -567,6 +633,7 @@ Public Class FlatteningCut
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -578,9 +645,9 @@ Public Class FlatteningCut
       m_CurrProjPage.SetWarningMessage("Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -595,13 +662,15 @@ Public Class FlatteningCut
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
@@ -609,9 +678,33 @@ Public Class FlatteningCut
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
       EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
       EgtMdbSave()
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
+   ' ricavo impronta di lavorazione (in larghezza) in funzione dell'utensile selezionato
+   Private Function GetToolFootprint() As Double
+      Dim dFootPrint As Double = 0
+      ' se richiesta lama
+      If m_nTool <> TOOL.MILL Then
+         If EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw) Then
+            EgtTdbGetCurrToolParam(MCH_TP.THICK, dFootPrint)
+         Else
+            EgtOutLog("In ToolDB missing saw " & m_MainWindow.m_CurrentMachine.sCurrSaw)
+         End If
+      ' altrimenti è richiesta fresa
+      Else
+         Dim sCurrMill = m_MainWindow.m_CurrentMachine.sCurrMill
+         If String.IsNullOrWhiteSpace( sCurrMill) Then sCurrMill = GetMillFromMilling(m_MainWindow.m_CurrentMachine.sCurrMilling)
+         ' recupero informazioni della fresa in uso
+         If EgtTdbSetCurrTool(sCurrMill) Then
+            EgtTdbGetCurrToolParam(MCH_TP.DIAM, dFootPrint)
+         Else
+            EgtOutLog("In ToolDB missing mill " & m_MainWindow.m_CurrentMachine.sCurrSaw)
+         End If
+      End If
+      Return dFootPrint
+   End Function
+
    Private Function CreateFlatteningCut() As Boolean
       ' Verifico sia definito il punto iniziale e il grezzo
       If Not m_bPointP1Ok Or Not m_bRawOk Then
@@ -625,24 +718,39 @@ Public Class FlatteningCut
       ' Disattivo eventuali lavorazioni presenti
       DeactivateAllMachinings()
       ' Creo nuovo pezzo per il taglio diretto
-      Dim nPartId = EgtCreateGroup(GDB_ID.ROOT)
-      EgtSetName(nPartId, NAME_DIRECTCUT)
-      Dim nLayerId = EgtCreateGroup(nPartId)
-      EgtSetName(nLayerId, NAME_OUTLOOP)
+      Dim nPartId As Integer = CreateDirectCutPart()
+      Dim nLayerId As Integer = EgtCreateGroup(nPartId)
+      EgtSetName(nLayerId, NAME_ONPATH)
       ' Creo il taglio
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
-      Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
+      Dim nCutId As Integer = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
+      ' Indico che è un taglio Diretto di tipo Flattening
+      EgtSetInfo(nCutId, INFO_DIRECTCUT, FlagDirectCuts.Flattening)
+      EgtSetInfo(nCutId, INFO_ENGR_MILL, m_nTool)
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
+      Dim dThick As Double = GetToolFootprint()
+      EgtSetInfo(nCutId, INFO_WIDTH, dThick)
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, 0)
       ' Imposto prima direzione
       EgtSetInfo(nCutId, INFO_DIR, 1)
+      ' Eventuale riduzione lavorazione
+      Dim bReducePath As Boolean = ( GetPrivateProfileInt(S_MACH_NEST, K_MACH_STARTCENTERTOOLPATH, 0, m_MainWindow.GetMachIniFile()) = 0)
+      ' Per fresatura eventuale riduzione della geometria
+      If m_nTool = TOOL.MILL Then
+         If bReducePath Then ExtendLenghtMillPath(nCutId, -dThick / 2)
+         EgtSetInfo(nCutId, INFO_STRICT, 0)
+      ' per tagli con lama eventuale riduzione della lavorazione
+      Else
+         EgtSetInfo(nCutId, INFO_STRICT, If( bReducePath, 3, 0))
+      End If
       ' Eventuale bloccaggio rotazione asse C tra le passate
       If RotLockChBx.IsChecked Then
          EgtSetInfo(nCutId, INFO_ENABLE_INVERT, False)
       End If
-      ' Funzione che crea i tagli successivi al primo
+      EgtSetInfo(nCutId, INFO_STEP_TYPE, m_nMachType)
+      ' Funzione che crea eventuali tagli successivi al primo
       MultiplyCut(nLayerId, nCutId)
       ' Creo layer per crocetta di riferimento
       Dim nCrossLayerId = EgtCreateGroup(nPartId)
@@ -670,57 +778,84 @@ Public Class FlatteningCut
          RemoveFinalHome()
       End If
       UpdateSimulOkBtn()
-
-
-
       Return m_bCutOk
    End Function
 
    Private Function MultiplyCut(nLayerId As Integer, nCutId As Integer) As Boolean
-      ' Recupero spessore della lama correntemente attiva
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+
+      ' Recupero impronta della lama o fresa utilizzata
+      Dim dThick As Double = GetToolFootprint()
+      If dThick = 0 Then Return False
+
+      ' Salvo la curva originale nella lista dei percorsi da concatenare
+      Dim CutsList As New List(Of Integer)
+      CutsList.Add(nCutId)
+
       ' Imposto angolo di rotazione a seconda del lato dei tagli
       Dim dRotAngO As Double = If(SideChBx.IsChecked(), -90, 90)
+
+      ' Calcolo numero di passate necessarie a coprire l'area impostata e lunghezza vettore delta
+      Dim dDelta As Double = dThick - m_dOverlap
+      Dim dWidth As Double = m_dWid - dThick
+      Dim nStepNum As Integer = CInt(Math.Ceiling(dWidth / dDelta)) + 1
+      If nStepNum > 1 Then dDelta = dWidth / (nStepNum - 1)
       ' Definisco vettore di spostamento
-      Dim vtDelta As Vector3d
-      vtDelta = Vector3d.FromPolar(1, m_dAngO)
+      Dim vtDelta As Vector3d = Vector3d.FromPolar(dDelta, m_dAngO)
       vtDelta.Rotate(Vector3d.Z_AX, dRotAngO)
-      ' Calcolo numero di iterazioni necessarie a coprire l'area impostata e lunghezza vettore delta
-      Dim nStepNum As Integer
-      Dim dDelta As Double
-      Dim dWidth As Double = m_dWid
-      dDelta = dThick - m_dOverlap
-      dWidth -= dThick
-      nStepNum = CInt(Math.Ceiling(dWidth / dDelta)) + 1
-      If nStepNum > 1 Then
-         dDelta = dWidth / (nStepNum - 1)
-      End If
-      ' Creo vettore delta
-      vtDelta *= dDelta
-      ' Creo indice per impostare info che indica tipologia di spianatura
-      Dim nTypeIndex As Integer = 1
+      ' Creo le ripetizioni
       For Index As Integer = 1 To nStepNum - 1
          Dim vtPerpMove As Vector3d = Index * vtDelta
          ' Creo copie
          Dim nCut2Id = EgtCopyGlob(nCutId, nLayerId)
-         ' Assegno info direzione a seconda del tipo di spianatura
-         If TypeCmBx.SelectedIndex = MACH_TYPE.ZIGZAG Then
-            If nTypeIndex = 1 Then
-               EgtSetInfo(nCut2Id, INFO_DIR, 2)
-               nTypeIndex = 2
-            Else
-               EgtSetInfo(nCut2Id, INFO_DIR, 1)
-               nTypeIndex = 1
-            End If
-         Else
-            EgtSetInfo(nCut2Id, INFO_DIR, 1)
-         End If
          EgtMove(nCut2Id, vtPerpMove, GDB_RT.GLOB)
+         ' Assegno info direzione a seconda del tipo di spianatura
+         Dim nDir As Integer = 1
+         If TypeCmBx.SelectedIndex = MACH_TYPE.ZIGZAG And Index Mod 2 <> 0 Then nDir = 2
+         EgtSetInfo(nCut2Id, INFO_DIR, nDir)
+         ' Inserisco nell'elenco delle curve eventualmente da concatenare
+         CutsList.Add(nCut2Id)
       Next
+
+      ' Se fresatura e richiesto percorso concatenato
+      If m_nTool = TOOL.MILL And m_bChainedPath Then
+         ' Trasformo la prima curva in composita (copiando tutte le info)
+         Dim vsInfo As String() = Nothing
+         EgtGetAllInfo( CutsList(0), vsInfo)
+         Dim nCompoCrv As Integer = EgtCreateCurveCompo(nLayerId, CutsList(0), True)
+         For Each sInfo As String In vsInfo
+            Dim KeyAndVal As String() = sInfo.Split( "=".ToCharArray)
+            If KeyAndVal.Count() >= 2 Then EgtSetInfo( nCompoCrv, KeyAndVal(0), KeyAndVal(1))
+         Next
+         ' Accodo opportunamente le curve successive
+         For Index As Integer = 1 To CutsList.Count - 1
+            ' Inverto le curve di ritorno (di indice dispari in lista)
+            If Index Mod 2 <> 0 Then EgtInvertCurve( CutsList(Index))
+            ' Aggiungo il collegamento
+            Dim ptStart As Point3d
+            EgtStartPoint(CutsList(Index), CutsList(Index), ptStart)
+            EgtAddCurveCompoLine( nCompoCrv, ptStart)
+            ' Aggiungo la curva
+            EgtAddCurveCompoCurve( nCompoCrv, CutsList(Index), true)
+         Next
+      End If
+
       Return True
    End Function
 
+   Private Sub ExtendLenghtMillPath(IdCurv As Integer, dExtend As Double,
+                                    Optional bStart As Boolean = True, Optional bEnd As Boolean = True)
+      If bStart Then
+         Dim ptStart As Point3d
+         EgtStartPoint(IdCurv, IdCurv, ptStart)
+         EgtTrimExtendCurveByLen(IdCurv, dExtend, ptStart)
+      End If
+      If bEnd Then
+         Dim ptEnd As Point3d
+         EgtEndPoint(IdCurv, IdCurv, ptEnd)
+         EgtTrimExtendCurveByLen(IdCurv, dExtend, ptEnd)
+      End If
+   End Sub
+
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
       ' Aggiungo crocette
       Dim vtCrossX As New Vector3d(20, 0, 0)

DirectCuts/GridCut.xaml

@@ -1,11 +1,11 @@
 <UserControl x:Class="GridCut"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   mc:Ignorable="d" 
-   d:DesignHeight="597.3" d:DesignWidth="256">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
 
    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{StaticResource OmagCut_LightGray}">-->
    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
@@ -35,37 +35,42 @@
             </Grid.ColumnDefinitions>
 
             <ToggleButton Name="Point1Btn" Grid.Column="0"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            <ToggleButton Name="Point2Btn" Grid.Column="1"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                          Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
 
+            <ToggleButton Name="Point2Btn" Grid.Column="1"
+                          Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
          </Grid>
 
-         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
-            Margin="6,0,6,0">
+         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_ComboBox}"
+                   Margin="6,0,6,0">
             <ComboBox.ItemTemplate>
                <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
                </DataTemplate>
             </ComboBox.ItemTemplate>
          </ComboBox>
 
          <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="4"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <Grid Grid.Row="5" Grid.ColumnSpan="2">
+         <!-- STANDARD -->
+         <Grid Name ="StandardGrid" Grid.Row="5" Grid.ColumnSpan="2">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="1.5*"/>
                <ColumnDefinition Width="2"/>
@@ -81,31 +86,98 @@
             <Border Grid.Column="1" Grid.Row="0" Grid.RowSpan="4" Background="Black" />
 
             <TextBlock Name="NumPzXTxBl" Grid.Column="0" Grid.Row="0"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
             <TextBlock Name="DimPzXTxBl" Grid.Column="2" Grid.Row="0"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
 
-            <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75" IsLength="False"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             <EgtWPFLib:EgtTextBox Name="DimPzXTxBx" Grid.Column="2" Grid.Row="1" Width="75"
-            Style="{StaticResource OmagCut_CalculatorTextBox}" />
-
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+   
             <TextBlock Name="NumPzYTxBl" Grid.Column="0" Grid.Row="2"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
             <TextBlock Name="DimPzYTxBl" Grid.Column="2" Grid.Row="2"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
 
-            <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75" IsLength="False"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             <EgtWPFLib:EgtTextBox Name="DimPzYTxBx" Grid.Column="2" Grid.Row="3" Width="75"
-            Style="{StaticResource OmagCut_CalculatorTextBox}" />
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
          </Grid>
 
+         <Button Name="CustomGridBtn" Grid.Row="5" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}" 
+                 Margin="10,30,10,30">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-grigliaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" Height="90" Width="90" />
+               <TextBlock Name="GridCutTxt" Grid.Column="1"
+                          HorizontalAlignment="Left"
+                          Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <!-- SPECIALE -->
+         <!--<Grid Name ="CustomGrid" Grid.Row="5" Grid.ColumnSpan="2">
+            <Grid.RowDefinitions>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="2.5*"/>
+            </Grid.RowDefinitions>
+
+            <StackPanel Orientation="Horizontal" Grid.Row="0">
+               <Button Name="AddCutBtn" Content="+" 
+                       Style="{DynamicResource OmagCut_YellowTextButton}"
+                       Width="35" Height="35" HorizontalAlignment="Left"/>
+               <Button Name="RemoveCutBtn" Content="-" 
+                       Style="{DynamicResource OmagCut_YellowTextButton}"
+                       Width="35" Height="35" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+               <ToggleButton Name="Cut_XTgBtn" Content="X"
+                             Style="{DynamicResource OmagCut_YellowToggleButton}"
+                             Width="35" Height="35" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+               <ToggleButton Name="Cut_YTgBtn" Content="Y"
+                             Style="{DynamicResource OmagCut_YellowToggleButton}"
+                             Width="35" Height="35" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+               <Button Name="UpdateBtn" Content="Update" 
+                       Style="{DynamicResource OmagCut_YellowTextButton}"
+                       Width="85" Height="35" HorizontalAlignment="Left" Margin="2,0,0,0"/>
+            </StackPanel>
+
+            <ScrollViewer Background="Transparent" Grid.Row="1"
+                          Margin="0,5,0,0"
+                          VerticalScrollBarVisibility="Auto" HorizontalScrollBarVisibility="Hidden">
+               <ListBox Name="CustomGridLstBx" ScrollViewer.CanContentScroll="False">
+                  <ItemsControl.ItemsPanel>
+                     <ItemsPanelTemplate>
+                        <StackPanel Orientation="Vertical"/>
+                     </ItemsPanelTemplate>
+                  </ItemsControl.ItemsPanel>
+                  <ItemsControl.ItemTemplate>
+                     <DataTemplate>
+                        <Grid Width="210">
+                           <Grid.ColumnDefinitions>
+                              <ColumnDefinition Width="5*"/>
+                              <ColumnDefinition Width="1*"/>
+                              <ColumnDefinition Width="5*"/>
+                           </Grid.ColumnDefinitions>
+                           <EgtWPFLib:EgtTextBox Text="{Binding sNumber}" Grid.Column="0"
+                                                 Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                           <EgtWPFLib:EgtTextBox Text="{Binding sInteraxis}" Grid.Column="2"
+                                                 Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                        </Grid>
+                     </DataTemplate>
+                  </ItemsControl.ItemTemplate>
+               </ListBox>
+            </ScrollViewer>
+         </Grid>-->
+
          <TextBlock Name="SideTxBl" Grid.Row="6" Grid.ColumnSpan="2"
-             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="SideChBx" Grid.Row="6" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
-             HorizontalAlignment="Right" Margin="0,0,6,0"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <CheckBox Name="SideChBx" Grid.Row="6" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_CheckBox_Single}"
+                   HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
          <Grid Grid.Row="7" Grid.ColumnSpan="2">
             <Grid.ColumnDefinitions>
@@ -115,13 +187,13 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
             <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
             <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
             <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
          </Grid>
 
          <Grid Grid.Row="11" Grid.ColumnSpan="2">
@@ -131,15 +203,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource SimulaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource EseguiImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
             <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
          </Grid>
 
       </Grid>
-
    </Border>
-
 </UserControl>

DirectCuts/GridCut.xaml.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports System.Collections.ObjectModel
 
 Public Class GridCut
    ' Riferimenti a pagine
@@ -38,6 +39,14 @@ Public Class GridCut
    Private m_ptPrev As Point3d
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
+   ' Gestione spessore lama
+   Private m_bSawTh As Boolean = False
+
+   ' Gestione griglia Custom
+   Dim m_bCustomGrid As Boolean = False
+   Public m_ListOfCut_X As New ObservableCollection(Of Cut_Axis)
+   Public m_ListOfCut_Y As New ObservableCollection(Of Cut_Axis)
+   Friend m_CustomGrid As CustomGridUC
 
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
@@ -57,35 +66,77 @@ Public Class GridCut
 
    Private Sub GridCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
-      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
-      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(MSG_DIRECTCUTPAGEUC + 12)
-      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 25)
+      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(90224)     ' Lama
+      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(90212)   ' Laser
+      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(90225)    ' Disegno
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
-      DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
-      DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
-      SideAngleTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 16)
-      NumPzXTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 19)
-      DimPzXTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 20)
-      NumPzYTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 21)
-      DimPzYTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 22)
-      SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      Point1Btn.ToolTip = EgtMsg(90210)                  ' Acquisisci P1
+      Point2Btn.ToolTip = EgtMsg(90211)                  ' Acquisisci P2
+      DepthTxBl.Text = EgtMsg(90213)                     ' Affondamento
+      DirectionTxBl.Text = EgtMsg(90215)                 ' Direzione
+      SideAngleTxBl.Text = EgtMsg(90216)                 ' Inclinazione
+      NumPzXTxBl.Text = EgtMsg(90219)                    ' Numero X
+      DimPzXTxBl.Text = EgtMsg(90220)                    ' Dimensioni X
+      NumPzYTxBl.Text = EgtMsg(90221)                    ' Numero Y
+      DimPzYTxBl.Text = EgtMsg(90222)                    ' Dimensioni Y
+      SideTxBl.Text = EgtMsg(90223)                      ' Taglia lato motore
+      SimulBtn.ToolTip = EgtMsg(90301)                   ' Simula
+      OkBtn.ToolTip = EgtMsg(90230)                      ' Esegui
+      GridCutTxt.Text = EgtMsg(90264)                    ' Custom Grid
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dAngV = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_ANGV, m_dAngV, m_MainWindow.GetIniFile())
-      m_nNumX = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX, m_MainWindow.GetIniFile())
-      m_dDimX = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
-      m_nNumY = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY, m_MainWindow.GetIniFile())
-      m_dDimY = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_DIMY, m_dDimY, m_MainWindow.GetIniFile())
-      m_bHeadSide = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_GRID_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
-      m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_GRID_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_nNumX = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX, m_MainWindow.GetIniFile())
+      m_dDimX = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
+      m_nNumY = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_nNumX = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX, m_MainWindow.GetIniFile())
+      m_dDimX = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
+      m_nNumY = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY, m_MainWindow.GetIniFile())
+      m_dDimY = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMY, m_dDimY, m_MainWindow.GetIniFile())
+
+      ' Carico i dati per i tagli di griglia Custom
+      m_bCustomGrid = (GetPrivateProfileInt(S_DIRECTCUTS, K_ENABLECUSTOMGRID, 0, m_MainWindow.GetIniFile()) <> 0)
+      If m_bCustomGrid Then
+         LoadCustomData(K_GRIDNUMDIMXCUSTOM, m_ListOfCut_X)
+         LoadCustomData(K_GRIDNUMDIMYCUSTOM, m_ListOfCut_Y)
+      End If
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
+      m_bHeadSide = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_GRID_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
+
+   End Sub
+
+   ' Lettura dei dati della griglia Custom
+   Private Sub LoadCustomData(sIpKeyName As String, LocalList As ObservableCollection(Of Cut_Axis))
+      Dim dVal As Double = 0
+      Dim nVal As Integer = 0
+      Dim sVal As String = String.Empty
+      GetPrivateProfileString(S_DIRECTCUTS, sIpKeyName, sVal, sVal, m_MainWindow.GetIniFile())
+      Dim sItems As String() = sVal.Split(";"c)
+      If sItems.Count > 0 Then
+         For Each Item As String In sItems
+            Dim sSubItems As String() = Item.Split(",")
+            If sSubItems.Count = 2 Then
+               If IsNumeric(sSubItems(0)) And IsNumeric(sSubItems(1)) Then
+                  nVal = CInt(sSubItems(0))
+                  StringToDouble(sSubItems(1), dVal)
+                  LocalList.Add(New Cut_Axis(nVal, dVal))
+               End If
+
+            End If
+         Next
+      End If
    End Sub
 
    Private Sub GridCut_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -124,7 +175,8 @@ Public Class GridCut
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -133,14 +185,24 @@ Public Class GridCut
       SetCoordVisibility(True)
       ShowCoord()
       ' Assegno parametri di lavorazione
-      DepthTxBx.Text = LenToString( m_dDepth, 1)
-      DirectionTxBx.Text = DoubleToString( m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
-      SideAngleTxBx.Text = DoubleToString( m_dAngV, 2)
+      DepthTxBx.Text = LenToString(m_dDepth, 1)
+      DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+      SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
+      DepthTxBx.Text = LenToString(m_dDepth, 1)
+      DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+      SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
       NumPzXTxBx.Text = m_nNumX.ToString()
-      DimPzXTxBx.Text = LenToString( m_dDimX, 1)
+      DimPzXTxBx.Text = LenToString(m_dDimX, 1)
+      DimPzXTxBx.Text = LenToString(m_dDimX, 1)
       NumPzYTxBx.Text = m_nNumY.ToString()
-      DimPzYTxBx.Text = LenToString( m_dDimY, 1)
+      DimPzYTxBx.Text = LenToString(m_dDimY, 1)
+      DimPzYTxBx.Text = LenToString(m_dDimY, 1)
       SideChBx.IsChecked = m_bHeadSide
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       ' Reset taglio e disabilito bottone esecuzione
       m_bCutOk = False
       UpdateSimulOkBtn()
@@ -150,30 +212,62 @@ Public Class GridCut
       Point1Btn.IsChecked = False
       ' Aggiorno visualizzazione
       EgtDraw()
+
+      If m_bCustomGrid Then
+         StandardGrid.Visibility = Visibility.Hidden
+         CustomGridBtn.Visibility = Visibility.Visible
+         m_CustomGrid = New CustomGridUC(Me)
+         'CustomGrid.Visibility = Visibility.Visible
+         'Cut_XTgBtn.IsChecked = True
+         'CustomGridLstBx.ItemsSource = m_ListOfCut_X
+      Else
+         StandardGrid.Visibility = Visibility.Visible
+         CustomGridBtn.Visibility = Visibility.Hidden
+         'CustomGrid.Visibility = Visibility.Hidden
+      End If
+
    End Sub
 
+
    Friend Sub GridCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_ANGV, DoubleToString( m_dAngV, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX.ToString(), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_DIMX, DoubleToString( m_dDimX, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY.ToString(), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_DIMY, DoubleToString( m_dDimY, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_HEADSIDE, If( m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_POSY, DoubleToString( m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_ANGV, DoubleToString(m_dAngV, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_NUMX, m_nNumX.ToString(), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_DIMX, DoubleToString(m_dDimX, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_NUMY, m_nNumY.ToString(), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_DIMY, DoubleToString(m_dDimY, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_HEADSIDE, If(m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_GRID_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+
+      If m_bCustomGrid Then
+         Dim sGridNumDimXCustom As String = ""
+         For Index_X As Integer = 0 To m_ListOfCut_X.Count - 1
+            sGridNumDimXCustom &= m_ListOfCut_X(Index_X).sNumber & "," & DoubleToString(m_ListOfCut_X(Index_X).dInteraxis, 2) & ";"
+         Next
+         If sGridNumDimXCustom <> "" Then sGridNumDimXCustom = sGridNumDimXCustom.Remove(sGridNumDimXCustom.Count - 1)
+         WritePrivateProfileString(S_DIRECTCUTS, "GridNumDimXCustom", sGridNumDimXCustom, m_MainWindow.GetIniFile())
+         Dim sGridNumDimYCustom As String = ""
+         For Index_Y As Integer = 0 To m_ListOfCut_Y.Count - 1
+            sGridNumDimYCustom &= m_ListOfCut_Y(Index_Y).sNumber & "," & DoubleToString(m_ListOfCut_Y(Index_Y).dInteraxis, 2) & ";"
+         Next
+         If sGridNumDimYCustom <> "" Then sGridNumDimYCustom = sGridNumDimYCustom.Remove(sGridNumDimYCustom.Count - 1)
+         WritePrivateProfileString(S_DIRECTCUTS, "GridNumDimYCustom", sGridNumDimYCustom, m_MainWindow.GetIniFile())
+      End If
+
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
          EraseDirectCutPart()
          ' Riattivo eventuali lavorazioni presenti
          ActivateAllMachinings()
+         EgtSetCurrPhase(1)
          ' Abilito registrazione progetto modificato
          EgtEnableModified()
          ' Nascondo la macchina
@@ -185,6 +279,11 @@ Public Class GridCut
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      ' se macchina solo WaterJet Disabilito/Nascondo parametri della lama
+      DepthTxBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -242,12 +341,31 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -255,18 +373,18 @@ Public Class GridCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -278,17 +396,15 @@ Public Class GridCut
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP1
          m_ptTipP1 = m_ptPrev
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Disegno il taglio
@@ -317,12 +433,31 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -330,18 +465,18 @@ Public Class GridCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -351,17 +486,15 @@ Public Class GridCut
          m_dAngV = 90 - dTAngV
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio
@@ -391,7 +524,7 @@ Public Class GridCut
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -469,6 +602,64 @@ Public Class GridCut
       EgtDraw()
    End Sub
 
+   Private Sub CustomGridBtn_Click(sender As Object, e As RoutedEventArgs) Handles CustomGridBtn.Click
+      m_CustomGrid.SetValue(Grid.RowProperty, 1)
+      m_CustomGrid.SetValue(Grid.RowSpanProperty, 6)
+      m_CustomGrid.SetValue(Grid.ColumnSpanProperty, 2)
+      SingleCutGrid.Children.Add(m_CustomGrid)
+   End Sub
+
+   '#Region "CUSTOM LIST GRID"
+
+   '   Private Sub CutX_Selected() Handles Cut_XTgBtn.Click
+   '      If Cut_XTgBtn.IsChecked Then
+   '         Cut_YTgBtn.IsChecked = False
+   '         CustomGridLstBx.ItemsSource = m_ListOfCut_X
+   '         CustomGridLstBx.UpdateLayout()
+   '      End If
+   '   End Sub
+
+   '   Private Sub CutY_Selected() Handles Cut_YTgBtn.Click
+   '      If Cut_YTgBtn.IsChecked Then
+   '         Cut_XTgBtn.IsChecked = False
+   '         CustomGridLstBx.ItemsSource = m_ListOfCut_Y
+   '         CustomGridLstBx.UpdateLayout()
+   '      End If
+   '   End Sub
+
+   '   Private Sub AddCut_Click(sender As Object, e As EventArgs) Handles AddCutBtn.Click
+   '      If Cut_XTgBtn.IsChecked Then
+   '         m_ListOfCut_X.Add(New Cut_Axis(0, 0))
+   '      ElseIf Cut_YTgBtn.IsChecked Then
+   '         m_ListOfCut_Y.Add(New Cut_Axis(0, 0))
+   '      End If
+   '      CustomGridLstBx.UpdateLayout()
+   '   End Sub
+
+   '   Private Sub RemoveCut_Click(sender As Object, e As EventArgs) Handles RemoveCutBtn.Click
+   '      Dim CurrIndexListSelected As Integer = -1
+   '      CurrIndexListSelected = CustomGridLstBx.SelectedIndex
+   '      If Cut_XTgBtn.IsChecked Then
+   '         If CurrIndexListSelected < 0 Or CurrIndexListSelected > m_ListOfCut_X.Count - 1 Then
+   '            CurrIndexListSelected = m_ListOfCut_X.Count - 1
+   '         End If
+   '         m_ListOfCut_X.RemoveAt(CurrIndexListSelected)
+   '      ElseIf Cut_YTgBtn.IsChecked Then
+   '         If CurrIndexListSelected < 0 Or CurrIndexListSelected > m_ListOfCut_Y.Count - 1 Then
+   '            CurrIndexListSelected = m_ListOfCut_Y.Count - 1
+   '         End If
+   '         m_ListOfCut_Y.RemoveAt(CurrIndexListSelected)
+   '      End If
+   '      CustomGridLstBx.UpdateLayout()
+   '   End Sub
+
+   '   Public Sub Update_Click() Handles UpdateBtn.Click
+   '      CreateGridCut()
+   '      EgtDraw()
+   '   End Sub
+
+   '#End Region    ' Custom Grid
+
    Private Sub SimulBtn_Click(sender As Object, e As RoutedEventArgs) Handles SimulBtn.Click
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -480,6 +671,7 @@ Public Class GridCut
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -491,9 +683,9 @@ Public Class GridCut
       m_CurrProjPage.SetWarningMessage("Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -508,22 +700,24 @@ Public Class GridCut
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
-   Private Function CreateGridCut() As Boolean
+   Friend Function CreateGridCut() As Boolean
       ' Verifico sia definito il punto iniziale e il grezzo
       If Not m_bPointP1Ok Or Not m_bRawOk Then
          m_bCutOk = False
@@ -536,9 +730,8 @@ Public Class GridCut
       ' Disattivo eventuali lavorazioni presenti
       DeactivateAllMachinings()
       ' Creo nuovo pezzo per il taglio diretto
-      Dim nPartId = EgtCreateGroup(GDB_ID.ROOT)
-      EgtSetName(nPartId, NAME_DIRECTCUT)
-      Dim nLayerId = EgtCreateGroup(nPartId)
+      Dim nPartId As Integer = CreateDirectCutPart()
+      Dim nLayerId As Integer = EgtCreateGroup(nPartId)
       EgtSetName(nLayerId, NAME_OUTLOOP)
       ' Creo il taglio parallelo alla lama
       Dim ptStart As Point3d = m_ptTipP1
@@ -570,16 +763,50 @@ Public Class GridCut
       If Not m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome Then
          RemoveFinalHome()
       End If
+      ' Se richiesta gestione tagli finali
+      OrderFinalSawCuts()
+      ' Aggiorno stato bottoni
       UpdateSimulOkBtn()
       Return m_bCutOk
    End Function
 
+   Private Function OrderFinalSawCuts() As Boolean
+      ' Se gestione tagli finali non richiesta, esco
+      If Not m_MainWindow.m_CurrentMachine.bEnableFinalSawCut Then Return False
+      ' Sposto i tagli finali alla fine, conservando l'ordine relativo
+      Dim nFirstMovedId As Integer = GDB_ID.NULL
+      Dim nRefId As Integer = EgtGetLastActiveOperation()
+      Dim nOpeId As Integer = EgtGetFirstActiveOperation()
+      While nOpeId <> GDB_ID.NULL
+         If nOpeId = nFirstMovedId Then Exit While
+         Dim nNextOpeId As Integer = EgtGetNextActiveOperation( nOpeId) 
+         If EgtGetOperationType( nOpeId) = MCH_OY.SAWING Then
+            Dim bFinalCut As Boolean = False
+            IF EgtGetInfo( nOpeId, "FinalCut", bFinalCut) AndAlso bFinalCut Then
+               EgtRelocateGlob( nOpeId, nRefId, GDB_POS.AFTER)
+               nRefId = nOpeId
+               If nFirstMovedId = GDB_ID.NULL Then nFirstMovedId = nOpeId
+            End If
+         End If
+         nOpeId = nNextOpeId
+      End While
+      ' Esco
+      Return True
+   End Function
+
    Private Function MultiplyCut(nLayerId As Integer) As Boolean
+      If m_bCustomGrid Then
+         Return MultiplyCut_1(nLayerId)
+      End If
+      Return MultiplyCut_0(nLayerId)
+   End Function
+
+   Private Function MultiplyCut_0(nLayerId As Integer) As Boolean
       ' Recupero lo spessore del taglio della lama o del waterjet correntemente attiva
       Dim nType As Integer = 0
-      EgtTdbGetCurrToolParam( MCH_TP.TYPE, nType)
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
       Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam( If( nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
+      EgtTdbGetCurrToolParam(If(nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
       ' Ricalcolo lo spessore in base all'inclinazione
       dThick = dThick / Math.Cos(m_dAngV * Math.PI / 180)
       ' Imposto angolo di rotazione a seconda del lato dei tagli paralleli
@@ -601,6 +828,16 @@ Public Class GridCut
       If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
          Dim dLenX As Double = dThick + (dDimPzX + dThick) * nNumPzX
          Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
+         ' Inidico che è un taglio Diretto di tipo GridCut
+         EgtSetInfo(nCutParaId, INFO_DIRECTCUT, MainWindow.FlagDirectCuts.GridCut)
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         ' Recupero spessore lama corrente
+         Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutParaId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
          ' Imposto affondamento e angolo di fianco sul taglio
          EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
          EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
@@ -619,6 +856,14 @@ Public Class GridCut
          ' Arretro il punto di partenza di uno spessore lama
          Dim vtDeltaPos As Vector3d = Vector3d.FromPolar(dThick + 0.1, m_dAngO - 90)
          Dim nCutPerpId = EgtCreateLinePDL(nLayerId, ptStart + vtDeltaPos, m_dAngO + 90, dLenY + 0.2)
+         ' Inidico che è un taglio Diretto di tipo GridCut
+         EgtSetInfo(nCutPerpId, INFO_DIRECTCUT, MainWindow.FlagDirectCuts.GridCut)
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutPerpId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
          ' Specchio se è attivo il flag che cambia lato di disegno
          If SideChBx.IsChecked() Then
             Dim vtRot As Vector3d = Vector3d.FromPolar(1, m_dAngO + 90)
@@ -640,7 +885,118 @@ Public Class GridCut
       Return True
    End Function
 
+   Private Function MultiplyCut_1(nLayerId As Integer) As Boolean
+      ' Recupero lo spessore del taglio della lama o del waterjet correntemente attiva
+      Dim nType As Integer = 0
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      Dim dThick As Double = 0
+      EgtTdbGetCurrToolParam(If(nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
+      ' Ricalcolo lo spessore in base all'inclinazione
+      dThick = dThick / Math.Cos(m_dAngV * Math.PI / 180)
+      ' Imposto angolo di rotazione a seconda del lato dei tagli paralleli
+      Dim dRotAngOX As Double = If(SideChBx.IsChecked(), -90, 90)
+
+      ' Recupero dati da interfaccia
+      Dim dDimPzX As Double = If(m_ListOfCut_X.Count = 0, 0.0, m_ListOfCut_X(0).dInteraxis)
+      Dim nNumPzX As Integer = If(m_ListOfCut_X.Count = 0, 0, m_ListOfCut_X(0).nNumber)
+
+      Dim dDimPzY As Double = If(m_ListOfCut_Y.Count = 0, 0.0, m_ListOfCut_Y(0).dInteraxis)
+      Dim nNumPzY As Integer = If(m_ListOfCut_Y.Count = 0, 0, m_ListOfCut_Y(0).nNumber)
+
+      Dim TotLenX As Double = 0
+      For Ind_X As Integer = 0 To m_ListOfCut_X.Count - 1
+         TotLenX = TotLenX + (m_ListOfCut_X(Ind_X).dInteraxis + dThick) * m_ListOfCut_X(Ind_X).nNumber
+      Next
+
+      Dim TotLenY As Double = 0
+      For Ind_Y As Integer = 0 To m_ListOfCut_Y.Count - 1
+         TotLenY = TotLenY + (m_ListOfCut_Y(Ind_Y).dInteraxis + dThick) * m_ListOfCut_Y(Ind_Y).nNumber
+      Next
+
+      ' Definisco vettore di spostamento
+      Dim vtDelta As Vector3d
+      ' Calcolo primo taglio parallelo
+      Dim ptStart As Point3d = m_ptTipP1
+      ptStart.z = 0
+      If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
+         ' -------------- TAGLI PARALLELI ASSE Y --------------
+         Dim dLenX As Double = dThick + TotLenX
+         Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
+
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         ' Recupero spessore lama corrente
+         Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutParaId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
+         ' Imposto affondamento e angolo di fianco sul taglio
+         EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
+         EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
+
+         For IndexList_Y As Integer = 0 To m_ListOfCut_Y.Count - 1
+            Dim nCut2Id As Integer = GDB_ID.NULL
+            dDimPzY = m_ListOfCut_Y(IndexList_Y).dInteraxis
+            nNumPzY = m_ListOfCut_Y(IndexList_Y).nNumber
+            ' Calcolo vettore di spostamento
+            vtDelta = Vector3d.FromPolar((dDimPzY + dThick), m_dAngO)
+            ' Ruoto il vettore di traslazione 
+            vtDelta.Rotate(Vector3d.Z_AX, dRotAngOX)
+            For Index As Integer = 1 To nNumPzY
+               Dim vtPerpMove As Vector3d = Index * vtDelta
+               ' Creo copie
+               nCut2Id = EgtCopyGlob(nCutParaId, nLayerId)
+               EgtMove(nCut2Id, vtPerpMove, GDB_RT.GLOB)
+            Next
+            nCutParaId = nCut2Id
+         Next
+
+         ' -------------- TAGLI PARALLELI ASSE X --------------
+         ' Calcolo primo taglio perpendicolare
+         Dim dLenY As Double = dThick + TotLenY
+         ' Arretro il punto di partenza di uno spessore lama
+         Dim vtDeltaPos As Vector3d = Vector3d.FromPolar(dThick + 0.1, m_dAngO - 90)
+         Dim nCutPerpId = EgtCreateLinePDL(nLayerId, ptStart + vtDeltaPos, m_dAngO + 90, dLenY + 0.2)
+
+         ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+         If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+            EgtOffsetCurve(nCutPerpId, -dThick, OFF_TYPE.EXTEND)
+         End If
+         ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
+         ' Specchio se è attivo il flag che cambia lato di disegno
+         If SideChBx.IsChecked() Then
+            Dim vtRot As Vector3d = Vector3d.FromPolar(1, m_dAngO + 90)
+            EgtMirror(nCutPerpId, ptStart + Vector3d.FromPolar(dThick / 2, m_dAngO - 90), vtRot, GDB_RT.GLOB)
+            EgtInvertCurve(nCutPerpId)
+         End If
+
+         ' Imposto affondamento e angolo di fianco sul taglio
+         EgtSetInfo(nCutPerpId, INFO_DEPTH, m_dDepth)
+         EgtSetInfo(nCutPerpId, INFO_SIDE_ANGLE, m_dAngV)
+
+         For IndexList_X As Integer = 0 To m_ListOfCut_X.Count - 1
+            Dim nCut3Id As Integer = GDB_ID.NULL
+            dDimPzX = m_ListOfCut_X(IndexList_X).dInteraxis
+            nNumPzX = m_ListOfCut_X(IndexList_X).nNumber
+            ' Calcolo secondo vettore di spostamento
+            vtDelta = Vector3d.FromPolar((dDimPzX + dThick), m_dAngO)
+            For Index As Integer = 1 To nNumPzX
+               Dim vtPerpMove As Vector3d = vtDelta * Index
+               ' Creo copie
+               nCut3Id = EgtCopyGlob(nCutPerpId, nLayerId)
+               EgtMove(nCut3Id, vtPerpMove, GDB_RT.GLOB)
+            Next
+            nCutPerpId = nCut3Id
+         Next
+
+      End If
+      Return True
+   End Function
+
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
+      ptP += New Vector3d(0, 0, 0.15)
       ' Aggiungo crocette
       Dim vtCrossX As New Vector3d(20, 0, 0)
       Dim vtCrossY As New Vector3d(0, 20, 0)
@@ -653,10 +1009,10 @@ Public Class GridCut
 
    Private Sub NumPzsTxBx_EgtClosed(sender As Object, e As EventArgs) Handles NumPzXTxBx.EgtClosed, NumPzYTxBx.EgtClosed,
                                                                               DimPzXTxBx.EgtClosed, DimPzYTxBx.EgtClosed, SideChBx.Click
-      StringToInt( NumPzXTxBx.Text, m_nNumX)
-      StringToLen( DimPzXTxBx.Text, m_dDimX)
-      StringToInt( NumPzYTxBx.Text, m_nNumY)
-      StringToLen( DimPzYTxBx.Text, m_dDimY)
+      StringToInt(NumPzXTxBx.Text, m_nNumX)
+      StringToLen(DimPzXTxBx.Text, m_dDimX)
+      StringToInt(NumPzYTxBx.Text, m_nNumY)
+      StringToLen(DimPzYTxBx.Text, m_dDimY)
       m_bHeadSide = SideChBx.IsChecked
       ' Disegno il taglio
       CreateGridCut()
@@ -698,4 +1054,56 @@ Public Class GridCut
       Return True
    End Function
 
+End Class
+
+Public Class Cut_Axis
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   ' Numero di tagli con questo interasse
+   Private m_nNumber As Integer = 0
+   Public Property sNumber As String
+      Get
+         Return m_nNumber.ToString
+      End Get
+      Set(value As String)
+         If IsNumeric(value) Then
+            m_nNumber = CInt(value)
+         End If
+      End Set
+   End Property
+   Public ReadOnly Property nNumber As Double
+      Get
+         Return m_nNumber
+      End Get
+   End Property
+
+   ' Distanza dal taglio precedente
+   Private m_dInteraxis As Double = 0.0
+   Public Property sInteraxis As String
+      Get
+         Return LenToString(m_dInteraxis, 2)
+      End Get
+      Set(value As String)
+         Dim PrevValue As Double = m_dInteraxis
+         If Not StringToLen(value, m_dInteraxis) Then m_dInteraxis = PrevValue
+      End Set
+   End Property
+   Public ReadOnly Property dInteraxis As Double
+      Get
+         Return m_dInteraxis
+      End Get
+   End Property
+
+   'Public ReadOnly Property UpdateSub As Boolean
+   '   Get
+   '      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_CustomGrid.Update_Click()
+   '      Return True
+   '   End Get
+   'End Property
+
+   Sub New(nNumb As Integer, dInter As Double)
+      m_nNumber = nNumb
+      m_dInteraxis = dInter
+   End Sub
+
 End Class

DirectCuts/MachineButtonsUC.xaml

@@ -1,10 +1,10 @@
 <UserControl x:Class="MachineButtonsUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="85.3" d:DesignWidth="853" Loaded="MachineButtons_Loaded">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="85.3" d:DesignWidth="853" Loaded="MachineButtons_Loaded">
 
    <!-- Definizione del controllo MachineButton -->
    <Grid Name="MachineButtonsGrid">
@@ -19,46 +19,51 @@
          <ColumnDefinition Width="1*"/>
          <ColumnDefinition Width="1*"/>
          <ColumnDefinition Width="1*"/>
+         <ColumnDefinition Width="1*"/>
       </Grid.ColumnDefinitions>
 
       <ToggleButton Name="MachineButton1" Grid.Column="0" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
-         <Image Name="ImageButton1" Style="{StaticResource OmagCut_ButtonIcon}"/>
+         <Image Name="ImageButton1" Style="{DynamicResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
-        <ToggleButton Name="MachineButton2" Grid.Column="1" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
-         <Image Name="ImageButton2" Style="{StaticResource OmagCut_ButtonIcon}"/>
+      <ToggleButton Name="MachineButton2" Grid.Column="1" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+         <Image Name="ImageButton2" Style="{DynamicResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
-        <ToggleButton Name="MachineButton3" Grid.Column="2" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
-         <Image Name="ImageButton3" Style="{StaticResource OmagCut_ButtonIcon}"/>
+      <ToggleButton Name="MachineButton3" Grid.Column="2" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+         <Image Name="ImageButton3" Style="{DynamicResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
-        <ToggleButton Name="MachineButton4" Grid.Column="3" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
-         <Image Name="ImageButton4" Style="{StaticResource OmagCut_ButtonIcon}"/>
+      <ToggleButton Name="MachineButton4" Grid.Column="3" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+         <Image Name="ImageButton4" Style="{DynamicResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
-        <ToggleButton Name="MachineButton5" Grid.Column="4" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
-         <Image Name="ImageButton5" Style="{StaticResource OmagCut_ButtonIcon}"/>
+      <ToggleButton Name="MachineButton5" Grid.Column="4" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+         <Image Name="ImageButton5" Style="{DynamicResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
-        <ToggleButton Name="MachineButton6" Grid.Column="5" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
-         <Image Name="ImageButton6" Style="{StaticResource OmagCut_ButtonIcon}"/>
+      <ToggleButton Name="MachineButton6" Grid.Column="5" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+         <Image Name="ImageButton6" Style="{DynamicResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
-        <ToggleButton Name="MachineButton7" Grid.Column="6" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
-         <Image Name="ImageButton7" Style="{StaticResource OmagCut_ButtonIcon}"/>
+      <ToggleButton Name="MachineButton7" Grid.Column="6" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+         <Image Name="ImageButton7" Style="{DynamicResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
-        <ToggleButton Name="MachineButton8" Grid.Column="7" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
-         <Image Name="ImageButton8" Style="{StaticResource OmagCut_ButtonIcon}"/>
+      <ToggleButton Name="MachineButton8" Grid.Column="7" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+         <Image Name="ImageButton8" Style="{DynamicResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
-        <ToggleButton Name="MachineButton9" Grid.Column="8" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
-         <Image Name="ImageButton9" Style="{StaticResource OmagCut_ButtonIcon}"/>
+      <ToggleButton Name="MachineButton9" Grid.Column="8" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+         <Image Name="ImageButton9" Style="{DynamicResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
-        <ToggleButton Name="MachineButton10" Grid.Column="9" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
-         <Image Name="ImageButton10" Style="{StaticResource OmagCut_ButtonIcon}"/>
+      <ToggleButton Name="MachineButton10" Grid.Column="9" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+         <Image Name="ImageButton10" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+      </ToggleButton>
+
+      <ToggleButton Name="MachineButton11" Grid.Column="10" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+         <Image Name="ImageButton11" Style="{DynamicResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
    </Grid>

DirectCuts/MachineButtonsUC.xaml.vb

@@ -7,10 +7,13 @@ Public Class MachineButtonsUC
    Private m_DirectCutPage As DirectCutPageUC
    Friend m_CN As CN_generico
 
+   Public nCountButton As Integer = 11
+
    Private m_bOnlyLaser As Boolean = False
    Private m_bFirst As Boolean = True
 
-   Private Const MAX_BUTTONS As Integer = 10
+   ' 9/2 aggiunto spazio per un nuovo bottone
+   Private Const MAX_BUTTONS As Integer = 11
    Private m_nCount As Integer = 0
    Private ImageArrayY(MAX_BUTTONS - 1) As String
    Private ImageArrayN(MAX_BUTTONS - 1) As String
@@ -31,6 +34,11 @@ Public Class MachineButtonsUC
    Private Const BTN_STATE_NOTHING As String = "Nothing"
    Private Const BTN_STATE_DOOR_OPENED As String = "DoorOpened"
    Private Const BTN_STATE_DOOR_CLOSED As String = "DoorClosed"
+   Private Const BTN_STATE_PARKING As String = "Parking"
+   Private Const BTN_STATE_HOME As String = "Home"
+   Private Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Private Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
+   Private Const BTN_ENABLE_PC As String = "EnablePC"
 
    Public Sub New(Optional bOnlyLaser As Boolean = False)
       ' This call is required by the designer.
@@ -71,11 +79,17 @@ Public Class MachineButtonsUC
          GetToggleButton(nIndex + 1).Visibility = Windows.Visibility.Hidden
       Next
 
+      ' notifico nella variabile pubblica il numero di pulsanti inseriti nella barra
+      nCountButton = m_nCount
+
       ' Se variabile di stato "Nothing"/"DoorOpened"/"DoorClosed" imposto immagine fissa
       For nIndex As Integer = 0 To m_nCount - 1
          If StateFlagArray(nIndex) = BTN_STATE_NOTHING OrElse
             StateFlagArray(nIndex) = BTN_STATE_DOOR_OPENED OrElse
-            StateFlagArray(nIndex) = BTN_STATE_DOOR_CLOSED Then
+            StateFlagArray(nIndex) = BTN_STATE_DOOR_CLOSED OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_PC OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_ZONE_1 OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_ZONE_2 Then
             ' mostra immagine fissa
             Try
                Dim s As String
@@ -121,6 +135,8 @@ Public Class MachineButtonsUC
                      CurrToggleBtn.Content = "Z - C"
                   ElseIf StateFlagArray(nIndex) = K_ZBJOG Then
                      CurrToggleBtn.Content = "Z - B"
+                  ElseIf StateFlagArray(nIndex) = K_REMOTE Then
+                     CurrToggleBtn.Content = EgtMsg(90262)     'Remote
                   End If
                Catch ex As Exception
                   EgtOutLog("Error loading content " & StateFlagArray(nIndex))
@@ -132,39 +148,45 @@ Public Class MachineButtonsUC
    End Sub
 
    Private Sub MachineButton_Click(sender As Object, e As RoutedEventArgs) Handles MachineButton1.Click, MachineButton2.Click, MachineButton3.Click, MachineButton4.Click, MachineButton5.Click,
-                                                                                   MachineButton6.Click, MachineButton7.Click, MachineButton8.Click, MachineButton9.Click, MachineButton10.Click
+                                                                                   MachineButton6.Click, MachineButton7.Click, MachineButton8.Click, MachineButton9.Click, MachineButton10.Click,
+                                                                                   MachineButton11.Click
       Dim CurrentBtn As Primitives.ToggleButton = e.Source
       ' recupero l'inidce del bottone selezionato
       Dim nIndex As Integer = GetToggleButtonIndex(CurrentBtn) - 1
 
-      Dim sBaseDir As String = m_MainWindow.m_CurrentMachine.sMachDir & "\DirectCmd\"
-      Dim sLuaFileName As String = String.Empty
 
-      ' Se il bottone chiamantè quello delle porte allora devo eseguire due comandi MDI
+      ' Se il bottone chiamante è quello delle porte allora devo eseguire due comandi MDI
       If nIndex = Array.IndexOf(StateFlagArray, BTN_STATE_DOOR_OPENED) OrElse
          nIndex = Array.IndexOf(StateFlagArray, BTN_STATE_DOOR_CLOSED) Then
-         Dim sTLuaFile As String = sBaseDir & CommandArrayY(nIndex)
-         Dim sFLuaFile As String = sBaseDir & CommandArrayN(nIndex)
-         ExecuteMDICommand(CurrentBtn, sTLuaFile)
-         ExecuteMDICommand(CurrentBtn, sFLuaFile)
+         VarMdiCommand.ExecuteMDICommand(CommandArrayY(nIndex))
+         VarMdiCommand.ExecuteMDICommand(CommandArrayN(nIndex))
          CurrentBtn.IsChecked = False
          Return
       End If
 
+      ' Se il bottone chiamante è quello per la selezione del pannello di controllo
+      If nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_PC) Then
+         If m_CN.nEnablePc = 1 Then
+            VarMdiCommand.ExecuteMDICommand(CommandArrayY(nIndex))
+         ElseIf m_CN.nEnablePc = 2 Then
+            VarMdiCommand.ExecuteMDICommand(CommandArrayN(nIndex))
+         End If
+         Return
+      End If
+
+      Dim sLuaFileName As String = ""
       If CurrentBtn.IsChecked() Then
-         'EgtLuaExecFile(sBaseDir & CommandArrayY(nIndex))
-         sLuaFileName = sBaseDir & CommandArrayY(nIndex)
+         sLuaFileName = CommandArrayY(nIndex)
       Else
          If Not (StateFlagArray(nIndex) = BTN_STATE_THREEAXIS Or
                  StateFlagArray(nIndex) = BTN_STATE_FIVEAXIS) Then
-            'EgtLuaExecFile(sBaseDir & CommandArrayN(nIndex))
-            sLuaFileName = sBaseDir & CommandArrayN(nIndex)
+            sLuaFileName = CommandArrayN(nIndex)
          Else
             Return
          End If
       End If
 
-      ExecuteMDICommand(CurrentBtn, sLuaFileName)
+      VarMdiCommand.ExecuteMDICommand(sLuaFileName)
 
       ' se non ha stato e quindi è un bottone normale, tolgo il check
       If StateFlagArray(nIndex) = BTN_STATE_NOTHING Then
@@ -173,175 +195,7 @@ Public Class MachineButtonsUC
 
    End Sub
 
-   Friend Sub ExecuteMDICommand(CurrentBtn As Primitives.ToggleButton, sLuaFileName As String)
-      If String.IsNullOrWhiteSpace(sLuaFileName) Then Return
-      Dim CmdString As String = String.Empty
-      Dim b2Start As Boolean = False
-      Dim EActive As Boolean = False
-      Dim ENumber As String = String.Empty
-      Dim EValue As String = String.Empty
-      Dim EType As String = 0
-      Dim ENumber2 As String = String.Empty
-      Dim EValue2 As String = String.Empty
-      Dim EType2 As String = 0
-      ' eseguo la lettura del file .lua associato al comando
-      ExecuteDirectCmdLua(sLuaFileName, CmdString, b2Start, EActive, ENumber, EValue, EType, ENumber2, EValue2, EType2)
-      ' comunico i dati calcolati al PLC (quidni ignoro eventuali comandi MDI), scrivo messaggio MDI
-      If EActive Then
-         Select Case m_MainWindow.m_CNCommunication.m_nNCType
-            Case 1, 2
-               If m_CN.m_NewVariable And m_MainWindow.m_CNCommunication.m_nNCType = 2 Then
-                  ' solo per Flexium
-                  m_CN.DPlcVariables_WriteVariables(ENumber, EValue)
-                  If Not IsNothing(ENumber2) And Not IsNothing(EValue2) Then
-                     m_CN.DPlcVariables_WriteVariables(ENumber2, EValue2)
-                  End If
-                  ' altrimenti scrittura delle variabili E
-               Else
-                  m_CN.DVariables_WriteVariables2(ENumber, EValue)
-               End If
-               Return
-            Case 3
-               If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
-                  ' scrivo prima variabile
-                  Select Case CShort(EType)
-                     Case 1
-                        m_CN.DVariables_WriteVariables3(ENumber, CShort(EType), CInt(EValue), 0, 0, "")
-                        EgtOutLog("ENumber= " & ENumber & "EType= " & CShort(EType) & "EValue= " & CInt(EValue))
-                     Case 2
-                        m_CN.DVariables_WriteVariables3(ENumber, CShort(EType), 0, CLng(EValue), 0, "")
-                        EgtOutLog("ENumber= " & ENumber & "EType= " & CShort(EType) & "EValue= " & CLng(EValue))
-                     Case 3
-                        Dim d As Double = 0
-                        StringToDouble(EValue, d)
-                        m_CN.DVariables_WriteVariables3(ENumber, CShort(EType), 0, 0, d, "")
-                        EgtOutLog("ENumber= " & ENumber & "EType= " & CShort(EType) & "EValue= " & d)
-                     Case 4
-                        m_CN.DVariables_WriteVariables3(ENumber, CShort(EType), 0, 0, 0, EValue)
-                        EgtOutLog("ENumber= " & ENumber & "EType= " & CShort(EType) & "EValue= " & EValue)
-                  End Select
-                  EgtOutLog("dopo scrittura prima variabile")
-                  If Not IsNothing(EType2) AndAlso CShort(EType) > 0 Then
-                     System.Threading.Thread.Sleep(100)
-                     ' scrivo seconda variabile
-                     Select Case CShort(EType2)
-                        Case 1
-                           m_CN.DVariables_WriteVariables3(ENumber2, CShort(EType2), CInt(EValue2), 0, 0, "")
-                           EgtOutLog("ENumber2= " & ENumber2 & "EType2= " & CShort(EType2) & "EValue2= " & CInt(EValue2))
-                        Case 2
-                           m_CN.DVariables_WriteVariables3(ENumber2, CShort(EType2), 0, CLng(EValue2), 0, "")
-                           EgtOutLog("ENumber2= " & ENumber2 & "EType2= " & CShort(EType2) & "EValue2= " & CLng(EValue2))
-                        Case 3
-                           Dim d As Double = 0
-                           StringToDouble(EValue2, d)
-                           m_CN.DVariables_WriteVariables3(ENumber2, CShort(EType2), 0, 0, d, "")
-                           EgtOutLog("ENumber2= " & ENumber2 & "EType2= " & CShort(EType2) & "EValue2= " & d)
-                        Case 4
-                           m_CN.DVariables_WriteVariables3(ENumber2, CShort(EType2), 0, 0, 0, EValue2)
-                           EgtOutLog("ENumber2= " & ENumber2 & "EType2= " & CShort(EType2) & "EValue2= " & EValue2)
-                     End Select
-                     EgtOutLog("dopo scrittura seconda variabile")
-                  End If
-                  Return
-               End If
-         End Select
-      End If
-
-      Dim nResult As Short
-      ' Imposto modalità MDI per controlli num
-      Select Case m_MainWindow.m_CNCommunication.m_nNCType
-         Case 1, 2
-            nResult = m_CN.DGeneralFunctions_WriteCncMode(2)
-         Case 3
-            'Per il siemens non devo fare nulla
-      End Select
-      m_CN.sz_ManualDataInput = CmdString
-      m_CN.MDI_command()
-      Select Case m_MainWindow.m_CNCommunication.m_nNCType
-         Case 1, 2
-            System.Threading.Thread.Sleep(300)
-            m_CN.DGeneralFunctions_CycleStart()
-         Case 3
-            'Per il siemens non devo fare nulla
-      End Select
-
-      If b2Start Then
-         System.Threading.Thread.Sleep(800)
-         m_CN.DGeneralFunctions_CycleStart()
-      End If
-      System.Threading.Thread.Sleep(300)
-      nResult = m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
-   End Sub
-
-   ' questa è una copia della funzione presente nel codice ControlsMachineButtonUC.xaml.vb
-   Friend Sub ExecuteDirectCmdLua(LuaFileName As String, ByRef CmdString As String, ByRef b2Start As Boolean, ByRef EActive As Boolean, ByRef ENumber As String, ByRef EValue As String, ByRef EType As String, ByRef ENumber2 As String, ByRef EValue2 As String, ByRef EType2 As String)
-      'Dim sBaseDir As String = m_MainWindow.m_CurrentMachine.sMachDir & "\DirectCmd\"
-      If EgtLuaExecFile(LuaFileName) Then
-         EgtOutLog("Lua " & LuaFileName & " eseguito")
-      Else
-         EgtOutLog("Lua " & LuaFileName & " non eseguito")
-      End If
-      Dim dFeed As Double = 0
-      If Not String.IsNullOrWhiteSpace(m_DirectCutPage.m_ManualAxesMove.FeedTxBx.Text) Then
-         StringToLen(m_DirectCutPage.m_ManualAxesMove.FeedTxBx.Text, dFeed)
-      Else
-         EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
-         EgtTdbGetCurrToolParam(MCH_TP.FEED, dFeed)
-      End If
-      EgtLuaSetGlobNumVar("CMD.F", dFeed)
-      Dim dSpeed As Double = 0
-      If Not String.IsNullOrWhiteSpace(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text) Then
-         StringToDouble(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text, dSpeed)
-      Else
-         EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
-         EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
-      End If
-      EgtLuaSetGlobNumVar("CMD.S", dSpeed)
-      Dim dL1, dL2, dL3, dR1, dR2 As Double
-      m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
-      EgtLuaSetGlobNumVar("CMD.L1", dL1)
-      EgtLuaSetGlobNumVar("CMD.L2", dL2)
-      EgtLuaSetGlobNumVar("CMD.L3", dL3)
-      EgtLuaSetGlobNumVar("CMD.R1", dR1)
-      EgtLuaSetGlobNumVar("CMD.R2", dR2)
-      EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
-      EgtLuaCallFunction("CmdString")
-      ' Leggo variabili
-      CmdString = String.Empty
-      EgtLuaGetGlobStringVar("CMD.CMDSTRING", CmdString)
-      b2Start = False
-      EgtLuaGetGlobBoolVar("CMD.DOUBLESTART", b2Start)
-      EActive = False
-      EgtLuaGetGlobBoolVar("CMD.EACTIVE", EActive)
-      ENumber = String.Empty
-      EgtLuaGetGlobStringVar("CMD.ENUMBER", ENumber)
-      EValue = String.Empty
-      EgtLuaGetGlobStringVar("CMD.EVALUE", EValue)
-      EType = String.Empty
-      EgtLuaGetGlobStringVar("CMD.ETYPE", EType)
-      EgtOutLog("ENUMBER: " & ENumber & " EVALUE: " & EValue & " ETYPE: " & EType)
-      ENumber2 = String.Empty
-      EgtLuaGetGlobStringVar("CMD.ENUMBER2", ENumber2)
-      EValue2 = String.Empty
-      EgtLuaGetGlobStringVar("CMD.EVALUE2", EValue2)
-      EType2 = String.Empty
-      EgtLuaGetGlobStringVar("CMD.ETYPE2", EType2)
-      EgtOutLog("ENUMBER2: " & ENumber2 & " EVALUE2: " & EValue2 & " ETYPE2: " & EType2)
-      ' Reset lua
-      EgtLuaResetGlobVar("CmdString")
-      EgtLuaResetGlobVar("CMD")
-      ' Log del comando
-      EgtOutLog("CmdString=" & If(Not String.IsNullOrEmpty(CmdString), CmdString, "") &
-                " b2Start=" & b2Start.ToString() &
-                " EActive=" & EActive.ToString &
-                " ENumber=" & If(Not String.IsNullOrEmpty(ENumber), ENumber, "") &
-                " EValue=" & If(Not String.IsNullOrEmpty(EValue), EValue, "") &
-                " EType=" & If(Not String.IsNullOrEmpty(EType), CInt(EType).ToString, "") &
-                " ENumber2=" & If(Not String.IsNullOrEmpty(ENumber2), ENumber2, "") &
-                " EValue2=" & If(Not String.IsNullOrEmpty(EValue2), EValue2, "") &
-                " EType2=" & If(Not String.IsNullOrEmpty(EType2), CInt(EType2).ToString, ""))
-   End Sub
-
+#Region "STATE CHANGED"
 
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_SPINDLE)
@@ -548,7 +402,11 @@ Public Class MachineButtonsUC
    End Sub
 
    Friend Sub DoorStateChanged(DoorState As Integer)
-      ' recupero le asscociazioni con i bottoni
+      If IsNothing(DoorState) Then
+         EgtOutLog("Error: door state null!")
+         Return
+      End If
+      ' recupero le associazioni con i bottoni
       Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_DOOR_OPENED)
       If nIndex = -1 Then Return
       ' bottone di apertura porte
@@ -558,7 +416,7 @@ Public Class MachineButtonsUC
       ' bottone di chiusura porte
       Dim DoorClosedButton As Primitives.ToggleButton = GetToggleButton(nIndex + 1)
       ' modifico il colore dei bottoni
-      If Not IsNothing(DoorState) Then
+      If Not IsNothing(DoorState) AndAlso Not IsNothing(DoorClosedButton) Then
          Select Case DoorState
             Case 0
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_Red")
@@ -566,7 +424,7 @@ Public Class MachineButtonsUC
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
          End Select
       End If
-      If Not IsNothing(DoorState) Then
+      If Not IsNothing(DoorState) AndAlso Not IsNothing(DoorOpenedButton) Then
          Select Case DoorState
             Case 0
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
@@ -578,6 +436,237 @@ Public Class MachineButtonsUC
       End If
    End Sub
 
+   Friend Sub ParkingStateChanged(ParkingState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_PARKING)
+      If nIndex = -1 Then Return
+      If ParkingState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
+   Friend Sub HomeStateChanged(HomeState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_HOME)
+      If nIndex = -1 Then Return
+      If HomeState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
+   Friend Sub EnableZoneStateChanged(ZoneState As Integer)
+      Dim sFlag As String = String.Empty
+      If ZoneState = 1 Then
+         sFlag = BTN_ENABLE_ZONE_1
+      ElseIf ZoneState = 2 Then
+         sFlag = BTN_ENABLE_ZONE_2
+      End If
+      ' recupero il bottone che deve essere acceso (quindi spengo l'altro)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, sFlag)
+
+      ' se non trovo nessun riferimento allora spengo entrambi i comandi
+      If nIndex = -1 Then
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_1)
+         GetToggleButton(nIndex + 1).IsChecked = False
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_2)
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Return
+      End If
+
+      If ZoneState = 1 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+         ' spengo l'altro bottone (lo stato dei due bottoni sono gestiti da una sola variabile)
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_2)
+         GetToggleButton(nIndex + 1).IsChecked = False
+
+      ElseIf ZoneState = 2 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+         ' spengo l'altro bottone (lo stato dei due bottoni sono gestiti da una sola variabile)
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_1)
+         GetToggleButton(nIndex + 1).IsChecked = False
+      End If
+   End Sub
+
+   Friend Sub EnablePcStateChanged(PcState As Integer)
+      ' il comando ButtonY accendo il Pannello_1, il comando ButtonN accendo il Pannello_2 (uno è la negazione dell'altro)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_ENABLE_PC)
+      If nIndex = -1 Then Return
+      If PcState = 1 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      ElseIf PcState = 2 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      Else
+         ' nessuno dei due pannelli attivo
+         GetToggleButton(nIndex + 1).IsChecked = False
+      End If
+   End Sub
+
+   Friend Sub TableUpChanged(TableUpState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_TABLEUP)
+      If nIndex = -1 Then Return
+      If TableUpState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
+   Friend Sub TableDownChanged(TableDownState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_TABLEDOWN)
+      If nIndex = -1 Then Return
+      If TableDownState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
    '----------------- Queste funzioni determina lo stato del bottone direttamente dalla lettura delle variabili CN
    Friend Sub XYJogChanged(ByVal bXYAxes As Boolean)
       ' recupero le asscociazioni con i bottoni
@@ -602,80 +691,97 @@ Public Class MachineButtonsUC
       ' selezoiono lo stato del bottone
       GetToggleButton(nIndex + 1).IsChecked = bBCAxes
    End Sub
+
+   Friend Sub RemoteChanged(ByVal bRemote As Boolean)
+      ' recupero le asscociazioni con i bottoni
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_REMOTE)
+      If nIndex = -1 Then Return
+      ' selezoiono lo stato del bottone
+      GetToggleButton(nIndex + 1).IsChecked = bRemote
+   End Sub
+
    '-----------------------------------------------------------------------------------------------------------------
 
+#End Region    ' State changed
+
    Private Function GetToggleButton(ByVal nIndex As Integer) As Primitives.ToggleButton
       Select Case nIndex
-      Case 1
-         Return MachineButton1
-      Case 2
-         Return MachineButton2
-      Case 3
-         Return MachineButton3
-      Case 4
-         Return MachineButton4
-      Case 5
-         Return MachineButton5
-      Case 6
-         Return MachineButton6
-      Case 7
-         Return MachineButton7
-      Case 8
-         Return MachineButton8
-      Case 9
-         Return MachineButton9
-      Case Else
-         Return MachineButton10
+         Case 1
+            Return MachineButton1
+         Case 2
+            Return MachineButton2
+         Case 3
+            Return MachineButton3
+         Case 4
+            Return MachineButton4
+         Case 5
+            Return MachineButton5
+         Case 6
+            Return MachineButton6
+         Case 7
+            Return MachineButton7
+         Case 8
+            Return MachineButton8
+         Case 9
+            Return MachineButton9
+         Case 10
+            Return MachineButton10
+         Case Else
+            Return MachineButton11
       End Select
    End Function
 
    Private Function GetToggleButtonIndex(ByVal nBtnName As Primitives.ToggleButton) As Integer
       Select Case nBtnName.Name
-      Case MachineButton1.Name
-         Return 1
-      Case MachineButton2.Name
-         Return 2
-      Case MachineButton3.Name
-         Return 3
-      Case MachineButton4.Name
-         Return 4
-      Case MachineButton5.Name
-         Return 5
-      Case MachineButton6.Name
-         Return 6
-      Case MachineButton7.Name
-         Return 7
-      Case MachineButton8.Name
-         Return 8
-      Case MachineButton9.Name
-         Return 9
-      Case Else
-         Return 10
+         Case MachineButton1.Name
+            Return 1
+         Case MachineButton2.Name
+            Return 2
+         Case MachineButton3.Name
+            Return 3
+         Case MachineButton4.Name
+            Return 4
+         Case MachineButton5.Name
+            Return 5
+         Case MachineButton6.Name
+            Return 6
+         Case MachineButton7.Name
+            Return 7
+         Case MachineButton8.Name
+            Return 8
+         Case MachineButton9.Name
+            Return 9
+         Case MachineButton10.Name
+            Return 10
+         Case Else
+            Return 11
       End Select
    End Function
 
    Private Function GetImage(ByVal nInd As Integer) As Image
       Select Case nInd
-      Case 1
-         Return ImageButton1
-      Case 2
-         Return ImageButton2
-      Case 3
-         Return ImageButton3
-      Case 4
-         Return ImageButton4
-      Case 5
-         Return ImageButton5
-      Case 6
-         Return ImageButton6
-      Case 7
-         Return ImageButton7
-      Case 8
-         Return ImageButton8
-      Case 9
-         Return ImageButton9
-      Case Else
-         Return ImageButton10
+         Case 1
+            Return ImageButton1
+         Case 2
+            Return ImageButton2
+         Case 3
+            Return ImageButton3
+         Case 4
+            Return ImageButton4
+         Case 5
+            Return ImageButton5
+         Case 6
+            Return ImageButton6
+         Case 7
+            Return ImageButton7
+         Case 8
+            Return ImageButton8
+         Case 9
+            Return ImageButton9
+         Case 10
+            Return ImageButton10
+         Case Else
+            Return ImageButton11
       End Select
    End Function
 

DirectCuts/ManualAxesMoveUC.xaml

@@ -1,11 +1,11 @@
 <UserControl x:Class="ManualAxesMoveUC" 
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
-   mc:Ignorable="d" 
-   d:DesignHeight="597.3" d:DesignWidth="256">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
 
    <Border Style="{DynamicResource OmagCut_Page2Border}">
 
@@ -26,7 +26,7 @@
          </Grid.RowDefinitions>
 
          <ToggleButton x:Name="G0Btn" Grid.Row="0" Height="60" Width="60"
-            Style="{StaticResource OmagCut_BlueIconToggleButton}">
+                       Style="{DynamicResource OmagCut_BlueIconToggleButton}">
             <TextBlock Name="G0TxBl" Text="G0" FontSize="29"/>
          </ToggleButton>
 
@@ -41,52 +41,60 @@
             </Grid.RowDefinitions>
 
             <TextBlock x:Name="FeedTxBl" Grid.Column="0" Grid.Row="0"
-   			Style="{StaticResource OmagCut_SingleUpperCaseCharacterTextBlock}" />
+   			           Style="{DynamicResource OmagCut_SingleUpperCaseCharacterTextBlock}" />
             <EgtWPFLib:EgtTextBox Name="FeedTxBx" Grid.Column="1" Margin="6,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             <TextBlock x:Name="SpeedTxBl" Grid.Column="0" Grid.Row="1"
-   			Style="{StaticResource OmagCut_SingleUpperCaseCharacterTextBlock}" />
+   			           Style="{DynamicResource OmagCut_SingleUpperCaseCharacterTextBlock}" />
             <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1" Grid.Row="1" Margin="6,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          </Grid>
 
-         <Button x:Name="L1Btn" Grid.Row="1" Height="60" Width="60" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+         <Button x:Name="L1Btn" Grid.Row="1" Height="60" Width="60" 
+                 Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
          <UniformGrid Rows="2" Grid.Column="1" Grid.Row="1">
             <EgtWPFLib:EgtTextBox Name="L1TxBx" Margin="0,4,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <CheckBox Name="L1SawThChBx" Height="20" Width="142" Style="{StaticResource OmagCut_CheckBox_Single}"
-             HorizontalAlignment="Right" Margin="0,0,6,0"/>
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+            <CheckBox Name="L1SawThChBx" Height="20" Width="142" 
+                      Style="{DynamicResource OmagCut_CheckBox_Single}"
+                      HorizontalAlignment="Right" Margin="0,0,6,0"/>
          </UniformGrid>
-         <Button x:Name="L2Btn" Grid.Row="2" Height="60" Width="60" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+         <Button x:Name="L2Btn" Grid.Row="2" Height="60" Width="60" 
+                 Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
          <UniformGrid Rows="2" Grid.Column="1" Grid.Row="2">
             <EgtWPFLib:EgtTextBox x:Name="L2TxBx" Margin="0,4,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <CheckBox Name="L2SawThChBx" Height="20" Width="142" Style="{StaticResource OmagCut_CheckBox_Single}"
-                HorizontalAlignment="Right" Margin="0,0,6,0"/>
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+            <CheckBox Name="L2SawThChBx" Height="20" Width="142" 
+                      Style="{DynamicResource OmagCut_CheckBox_Single}"
+                      HorizontalAlignment="Right" Margin="0,0,6,0"/>
          </UniformGrid>
-         <Button x:Name="L3Btn" Grid.Row="3" Height="60" Width="60" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+         <Button x:Name="L3Btn" Grid.Row="3" Height="60" Width="60" 
+                 Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
          <EgtWPFLib:EgtTextBox x:Name="L3TxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-         <Button x:Name="R1Btn" Grid.Row="4" Height="60" Width="60" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-         <EgtWPFLib:EgtTextBox x:Name="R1TxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-         <Button x:Name="R2Btn" Grid.Row="5" Height="60" Width="60" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-         <EgtWPFLib:EgtTextBox x:Name="R2TxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-   
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <Button x:Name="R1Btn" Grid.Row="4" Height="60" Width="60" 
+                 Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+         <EgtWPFLib:EgtTextBox x:Name="R1TxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <Button x:Name="R2Btn" Grid.Row="5" Height="60" Width="60" 
+                 Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+         <EgtWPFLib:EgtTextBox x:Name="R2TxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
          <Grid Grid.Row="7" Grid.ColumnSpan="2">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
-   
-            <Button Name="BackBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+
+            <Button Name="BackBtn" Grid.Column="1" 
+                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
-   
+
          </Grid>
-   
+
       </Grid>
 
    </Border>

DirectCuts/ManualAxesMoveUC.xaml.vb

@@ -21,10 +21,12 @@ Public Class ManualAxesMoveUC
       ' Messaggi
       L1SawThChBx.Content = EgtMsg(90232)   ' Spessore lama
       L2SawThChBx.Content = EgtMsg(90232)   ' Spessore lama
+
       AddHandler m_Timer.Tick, AddressOf Timer_tick
    End Sub
 
    Private Sub ManualAxesMove_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      m_CN = m_MainWindow.m_DirectCutPageUC.m_CN
       ' Valori feed e speed da lama corrente
       Dim dTemp As Double = 0
       EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
@@ -51,14 +53,43 @@ Public Class ManualAxesMoveUC
       ' Imposto check per considerare spessore lama
       L1SawThChBx.IsChecked = m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove
       L2SawThChBx.IsChecked = m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove
+
+      ' Aggiorno visualizzazione
+      SetMachineInCurrPos()
+      EgtDraw()
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
    End Sub
 
    Private Sub ManualAxesMove_UnLoaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       m_Timer.Stop()
       m_MainWindow.m_CurrentMachine.bAddSawThTo5AxMove = (L1SawThChBx.IsEnabled And L1SawThChBx.IsChecked) Or
                                                          (L2SawThChBx.IsEnabled And L2SawThChBx.IsChecked)
+      ' Nascondo la macchina
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+      EgtSetMachineLook(MCH_LOOK.TAB)
+      EgtDraw()
    End Sub
 
+   Private Function SetMachineInCurrPos() As Boolean
+      ' Recupero la posizione macchina
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return False
+      ' Recupero il nome degli assi macchina
+      Dim sL1 As String = String.Empty
+      Dim sL2 As String = String.Empty
+      Dim sL3 As String = String.Empty
+      Dim sR1 As String = String.Empty
+      Dim sR2 As String = String.Empty
+      If Not m_MainWindow.m_CNCommunication.GetAxesNames(sL1, sL2, sL3, sR1, sR2) Then Return False
+      ' Visualizzo macchina in posizione
+      EgtSetAxisPos(sL1, dL1)
+      EgtSetAxisPos(sL2, dL2)
+      EgtSetAxisPos(sL3, dL3)
+      EgtSetAxisPos(sR1, dR1)
+      EgtSetAxisPos(sR2, dR2)
+      Return True
+   End Function
+
    Private Sub UpdateAxesNames()
       Dim sL1 As String = String.Empty
       Dim sL2 As String = String.Empty
@@ -123,11 +154,16 @@ Public Class ManualAxesMoveUC
    Private Sub Timer_tick()
       UpdateAxesNames()
       UpdateUseSawThickness()
+      ' Aggiorno posizione macchina in disegno
+      SetMachineInCurrPos()
+      ' Aggiorno il disegno
+      EgtDraw()
    End Sub
 
    Private m_MoveClicked As Boolean = False
    Private Sub XXBtn_Click(sender As Object, e As MouseButtonEventArgs) Handles L1Btn.PreviewMouseDown, L2Btn.PreviewMouseDown, L3Btn.PreviewMouseDown, R1Btn.PreviewMouseDown, R2Btn.PreviewMouseDown
       If e.ClickCount > 1 OrElse m_MoveClicked Then
+         EgtOutLog(" -> Hold on! Do not click compulsively.")
          Return
       End If
       m_MoveClicked = True
@@ -201,18 +237,20 @@ Public Class ManualAxesMoveUC
       EgtOutLog("CmdString=" & CmdString)
       ' Eseguo in MDI
       m_CN.DGeneralFunctions_WriteCncMode(2)     ' Modalità MDI
-      System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+      System.Threading.Thread.Sleep(150)
       m_CN.sz_ManualDataInput = CmdString
       m_CN.MDI_command()
-      System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+      System.Threading.Thread.Sleep(150)
       m_CN.DGeneralFunctions_CycleStart()
-      m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
+      System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+      ' m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
       m_MoveClicked = False
    End Sub
 
    Private Sub SiemensMoveAxis(CurrentBtn As Button)
       ' leggo se stato reset
       If Not m_CN.bResetState Then
+         EgtOutLog("Reset status is 'False', is denied to execute file '\DirectCmd\AxesMove.lua'.")
          m_MoveClicked = False
          Return
       End If
@@ -337,7 +375,7 @@ Public Class ManualAxesMoveUC
    End Function
 
    Private Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Sub G0Btn_Checked(sender As Object, e As RoutedEventArgs) Handles G0Btn.Checked

DirectCuts/MultipleCut.xaml

@@ -1,11 +1,10 @@
 <UserControl x:Class="MultipleCut"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-             mc:Ignorable="d" 
-   d:DesignHeight="597.3" d:DesignWidth="256">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             mc:Ignorable="d" d:DesignHeight="597.3" d:DesignWidth="256">
 
    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
@@ -36,158 +35,163 @@
             </Grid.ColumnDefinitions>
 
             <ToggleButton Name="Point1Btn" Grid.Column="0"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                          Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
             <ToggleButton Name="Point2Btn" Grid.Column="1"
-            Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                          Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
 
          </Grid>
 
-         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
-            Margin="6,0,6,0">
+         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_ComboBox}"
+                   Margin="6,0,6,0">
             <ComboBox.ItemTemplate>
                <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
                </DataTemplate>
             </ComboBox.ItemTemplate>
          </ComboBox>
 
          <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="3"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="4"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="5"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          <Grid Grid.Row="6" Grid.ColumnSpan="2" Visibility="Visible">
-             <Grid.ColumnDefinitions>
-                 <ColumnDefinition Width="0.5*"/>
-                 <ColumnDefinition Width="1"/>
-                 <ColumnDefinition Width="1.5*"/>
-                 <ColumnDefinition Width="1"/>
-                 <ColumnDefinition Width="1.5*"/>
-                 <ColumnDefinition Width="0.2*"/>
-             </Grid.ColumnDefinitions>
-             <Grid.RowDefinitions>
-                 <RowDefinition Height="0.5*"/>
-                 <RowDefinition Height="2*"/>
-             </Grid.RowDefinitions>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1"/>
+               <ColumnDefinition Width="1.5*"/>
+               <ColumnDefinition Width="1"/>
+               <ColumnDefinition Width="1.5*"/>
+               <ColumnDefinition Width="0.2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="2*"/>
+            </Grid.RowDefinitions>
 
-             <Border Grid.Column="1" Grid.Row="0" Grid.RowSpan="10" Background="Black" />
+            <Border Grid.Column="1" Grid.Row="0" Grid.RowSpan="10" Background="Black" />
 
-             <TextBlock Name="NumPzTxBl" Grid.Column="2" Grid.Row="0"
-             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-             <TextBlock Name="DimPzTxBl" Grid.Column="4" Grid.Row="0"
-             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <TextBlock Name="NumPzTxBl" Grid.Column="2" Grid.Row="0"
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <TextBlock Name="DimPzTxBl" Grid.Column="4" Grid.Row="0"
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
 
-                <Border Grid.Column="3" Grid.Row="0" Grid.RowSpan="10" Background="Black" />
+            <Border Grid.Column="3" Grid.Row="0" Grid.RowSpan="10" Background="Black" />
 
-                <ScrollViewer VerticalScrollBarVisibility="Visible" Grid.Row="6" Grid.ColumnSpan="6" Visibility="Visible">
-                 <Grid>
-                     <Grid.ColumnDefinitions>
-                         <ColumnDefinition Width="0.5*"/>
-                         <ColumnDefinition Width="1.5*"/>
-                         <ColumnDefinition Width="2"/>
-                         <ColumnDefinition Width="1.5*"/>
-                     </Grid.ColumnDefinitions>
-                     <Grid.RowDefinitions>
-                         <RowDefinition Height="35"/>
-                         <RowDefinition Height="35"/>
-                         <RowDefinition Height="35"/>
-                         <RowDefinition Height="35"/>
-                         <RowDefinition Height="35"/>
-                         <RowDefinition Height="35"/>
-                         <RowDefinition Height="35"/>
-                         <RowDefinition Height="35"/>
-                         <RowDefinition Height="35"/>
-                         <RowDefinition Height="35"/>
-                     </Grid.RowDefinitions>
+            <ScrollViewer VerticalScrollBarVisibility="Visible" Grid.Row="6" Grid.ColumnSpan="6" Visibility="Visible">
+               <Grid>
+                  <Grid.ColumnDefinitions>
+                     <ColumnDefinition Width="0.5*"/>
+                     <ColumnDefinition Width="1.5*"/>
+                     <ColumnDefinition Width="2"/>
+                     <ColumnDefinition Width="1.5*"/>
+                  </Grid.ColumnDefinitions>
+                  <Grid.RowDefinitions>
+                     <RowDefinition Height="35"/>
+                     <RowDefinition Height="35"/>
+                     <RowDefinition Height="35"/>
+                     <RowDefinition Height="35"/>
+                     <RowDefinition Height="35"/>
+                     <RowDefinition Height="35"/>
+                     <RowDefinition Height="35"/>
+                     <RowDefinition Height="35"/>
+                     <RowDefinition Height="35"/>
+                     <RowDefinition Height="35"/>
+                  </Grid.RowDefinitions>
 
-                     <Border Grid.Column="2" Grid.Row="0" Grid.RowSpan="10" Background="Black" Visibility="Hidden"/>
+                  <Border Grid.Column="2" Grid.Row="0" Grid.RowSpan="10" Background="Black" Visibility="Hidden"/>
 
-                     <TextBlock Name="Num1TxBl" Grid.Column="0" Grid.Row="0"
-                     Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz1TxBx" Grid.Column="1" Grid.Row="0" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                     <EgtWPFLib:EgtTextBox Name="DimPz1TxBx" Grid.Column="3" Grid.Row="0" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                  <TextBlock Name="Num1TxBl" Grid.Column="0" Grid.Row="0"
+                             Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                  <EgtWPFLib:EgtTextBox Name="NumPz1TxBx" Grid.Column="1" Grid.Row="0" Width="75" IsLength="False"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                  <EgtWPFLib:EgtTextBox Name="DimPz1TxBx" Grid.Column="3" Grid.Row="0" Width="75"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                     <TextBlock Name="Num2TxBl" Grid.Column="0" Grid.Row="1"
-                     Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz2TxBx" Grid.Column="1" Grid.Row="1" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                     <EgtWPFLib:EgtTextBox Name="DimPz2TxBx" Grid.Column="3" Grid.Row="1" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                  <TextBlock Name="Num2TxBl" Grid.Column="0" Grid.Row="1"
+                             Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                  <EgtWPFLib:EgtTextBox Name="NumPz2TxBx" Grid.Column="1" Grid.Row="1" Width="75" IsLength="False"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                  <EgtWPFLib:EgtTextBox Name="DimPz2TxBx" Grid.Column="3" Grid.Row="1" Width="75"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                     <TextBlock Name="Num3TxBl" Grid.Column="0" Grid.Row="2"
-                     Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz3TxBx" Grid.Column="1" Grid.Row="2" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                     <EgtWPFLib:EgtTextBox Name="DimPz3TxBx" Grid.Column="3" Grid.Row="2" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                  <TextBlock Name="Num3TxBl" Grid.Column="0" Grid.Row="2"
+                             Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                  <EgtWPFLib:EgtTextBox Name="NumPz3TxBx" Grid.Column="1" Grid.Row="2" Width="75" IsLength="False"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                  <EgtWPFLib:EgtTextBox Name="DimPz3TxBx" Grid.Column="3" Grid.Row="2" Width="75"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                     <TextBlock Name="Num4TxBl" Grid.Column="0" Grid.Row="3"
-                     Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz4TxBx" Grid.Column="1" Grid.Row="3" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                     <EgtWPFLib:EgtTextBox Name="DimPz4TxBx" Grid.Column="3" Grid.Row="3" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                  <TextBlock Name="Num4TxBl" Grid.Column="0" Grid.Row="3"
+                             Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                  <EgtWPFLib:EgtTextBox Name="NumPz4TxBx" Grid.Column="1" Grid.Row="3" Width="75" IsLength="False"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                  <EgtWPFLib:EgtTextBox Name="DimPz4TxBx" Grid.Column="3" Grid.Row="3" Width="75"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                     <TextBlock Name="Num5TxBl" Grid.Column="0" Grid.Row="4"
-                     Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz5TxBx" Grid.Column="1" Grid.Row="4" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                     <EgtWPFLib:EgtTextBox Name="DimPz5TxBx" Grid.Column="3" Grid.Row="4" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                  <TextBlock Name="Num5TxBl" Grid.Column="0" Grid.Row="4"
+                             Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                  <EgtWPFLib:EgtTextBox Name="NumPz5TxBx" Grid.Column="1" Grid.Row="4" Width="75" IsLength="False"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                  <EgtWPFLib:EgtTextBox Name="DimPz5TxBx" Grid.Column="3" Grid.Row="4" Width="75"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                     <TextBlock Name="Num6TxBl" Grid.Column="0" Grid.Row="5"
-                     Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz6TxBx" Grid.Column="1" Grid.Row="5" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                     <EgtWPFLib:EgtTextBox Name="DimPz6TxBx" Grid.Column="3" Grid.Row="5" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                  <TextBlock Name="Num6TxBl" Grid.Column="0" Grid.Row="5"
+                             Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                  <EgtWPFLib:EgtTextBox Name="NumPz6TxBx" Grid.Column="1" Grid.Row="5" Width="75" IsLength="False"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                  <EgtWPFLib:EgtTextBox Name="DimPz6TxBx" Grid.Column="3" Grid.Row="5" Width="75"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                     <TextBlock Name="Num7TxBl" Grid.Column="0" Grid.Row="6"
-                     Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz7TxBx" Grid.Column="1" Grid.Row="6" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                     <EgtWPFLib:EgtTextBox Name="DimPz7TxBx" Grid.Column="3" Grid.Row="6" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                  <TextBlock Name="Num7TxBl" Grid.Column="0" Grid.Row="6"
+                             Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                  <EgtWPFLib:EgtTextBox Name="NumPz7TxBx" Grid.Column="1" Grid.Row="6" Width="75" IsLength="False"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                  <EgtWPFLib:EgtTextBox Name="DimPz7TxBx" Grid.Column="3" Grid.Row="6" Width="75"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                     <TextBlock Name="Num8TxBl" Grid.Column="0" Grid.Row="7"
-                     Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz8TxBx" Grid.Column="1" Grid.Row="7" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                     <EgtWPFLib:EgtTextBox Name="DimPz8TxBx" Grid.Column="3" Grid.Row="7" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                  <TextBlock Name="Num8TxBl" Grid.Column="0" Grid.Row="7"
+                             Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                  <EgtWPFLib:EgtTextBox Name="NumPz8TxBx" Grid.Column="1" Grid.Row="7" Width="75" IsLength="False"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                  <EgtWPFLib:EgtTextBox Name="DimPz8TxBx" Grid.Column="3" Grid.Row="7" Width="75"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                     <TextBlock Name="Num9TxBl" Grid.Column="0" Grid.Row="8"
-                     Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz9TxBx" Grid.Column="1" Grid.Row="8" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                     <EgtWPFLib:EgtTextBox Name="DimPz9TxBx" Grid.Column="3" Grid.Row="8" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                  <TextBlock Name="Num9TxBl" Grid.Column="0" Grid.Row="8"
+                             Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                  <EgtWPFLib:EgtTextBox Name="NumPz9TxBx" Grid.Column="1" Grid.Row="8" Width="75" IsLength="False"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                  <EgtWPFLib:EgtTextBox Name="DimPz9TxBx" Grid.Column="3" Grid.Row="8" Width="75"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-                     <TextBlock Name="Num10TxBl" Grid.Column="0" Grid.Row="9"
-                     Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz10TxBx" Grid.Column="1" Grid.Row="9" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                     <EgtWPFLib:EgtTextBox Name="DimPz10TxBx" Grid.Column="3" Grid.Row="9" Width="75"
-                     Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                 </Grid>
-             </ScrollViewer>
+                  <TextBlock Name="Num10TxBl" Grid.Column="0" Grid.Row="9"
+                             Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                  <EgtWPFLib:EgtTextBox Name="NumPz10TxBx" Grid.Column="1" Grid.Row="9" Width="75" IsLength="False"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                  <EgtWPFLib:EgtTextBox Name="DimPz10TxBx" Grid.Column="3" Grid.Row="9" Width="75"
+                                        Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+               </Grid>
+            </ScrollViewer>
          </Grid>
 
          <!--<Grid Grid.Row="6" Grid.ColumnSpan="2" Visibility="Visible">
@@ -228,9 +232,10 @@
          </Grid>-->
 
          <TextBlock Name="SideTxBl" Grid.Row="7" Grid.ColumnSpan="2"
-             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="SideChBx" Grid.Row="7" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
-             HorizontalAlignment="Right" Margin="0,0,6,0"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <CheckBox Name="SideChBx" Grid.Row="7" Grid.ColumnSpan="2" 
+                   Style="{DynamicResource OmagCut_CheckBox_Single}"
+                   HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
          <Grid Grid.Row="8" Grid.ColumnSpan="2">
             <Grid.ColumnDefinitions>
@@ -240,13 +245,13 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
             <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
             <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
             <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
          </Grid>
 
          <Grid Grid.Row="9" Grid.ColumnSpan="2">
@@ -256,10 +261,14 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource SimulaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource EseguiImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
             <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
          </Grid>
 

DirectCuts/MultipleCut.xaml.vb

@@ -38,7 +38,8 @@ Public Class MultipleCut
    Private m_ptPrev As Point3d
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
-
+   ' Gestione spessore lama
+   Private m_bSawTh As Boolean = False
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
    Private Const MIN_CUT_LEN As Double = 10.0
@@ -57,23 +58,23 @@ Public Class MultipleCut
 
    Private Sub MultipleCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
-      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
-      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(MSG_DIRECTCUTPAGEUC + 12)
-      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 25)
+      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(90224)     ' Lama
+      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(90212)   ' Laser
+      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(90225)    ' Disegno
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
-      DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
-      LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
-      DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
-      SideAngleTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 16)
-      NumPzTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 17)
-      DimPzTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 18)
-      SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      Point1Btn.ToolTip = EgtMsg(90210)                  ' Acquisisci P1
+      Point2Btn.ToolTip = EgtMsg(90211)                  ' Acquisisci P2
+      DepthTxBl.Text = EgtMsg(90213)                     ' Affondamento
+      LenghtTxBl.Text = EgtMsg(90214)                    ' Lunghezza
+      DirectionTxBl.Text = EgtMsg(90215)                 ' Direzione
+      SideAngleTxBl.Text = EgtMsg(90216)                 ' Inclinazione
+      NumPzTxBl.Text = EgtMsg(90217)                     ' Numero
+      DimPzTxBl.Text = EgtMsg(90218)                     ' Dimensioni
+      SideTxBl.Text = EgtMsg(90223)                      ' Tagli lato motore
+      SimulBtn.ToolTip = EgtMsg(90301)                   ' Simula
+      OkBtn.ToolTip = EgtMsg(90230)                      ' Esegui
       Num1TxBl.Text = "1"
       Num2TxBl.Text = "2"
       Num3TxBl.Text = "3"
@@ -90,9 +91,14 @@ Public Class MultipleCut
       m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
       m_dAngV = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_ANGV, m_dAngV, m_MainWindow.GetIniFile())
       For nI As Integer = 0 To 9
-         m_nNum( nI) = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_MULT_NUM & (nI+1).ToString(), 0, m_MainWindow.GetIniFile())
-         m_dDim( nI) = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_DIM & (nI+1).ToString(), 0, m_MainWindow.GetIniFile())
+         m_nNum(nI) = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_MULT_NUM & (nI + 1).ToString(), 0, m_MainWindow.GetIniFile())
+         m_dDim(nI) = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_MULT_DIM & (nI + 1).ToString(), 0, m_MainWindow.GetIniFile())
       Next
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       m_bHeadSide = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_MULT_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
       m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
       m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_MULT_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
@@ -168,6 +174,11 @@ Public Class MultipleCut
       NumPz10TxBx.Text = m_nNum(9).ToString()
       DimPz10TxBx.Text = LenToString( m_dDim(9), 1)
       SideChBx.IsChecked = m_bHeadSide
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       ' Reset taglio e disabilito bottone esecuzione
       m_bCutOk = False
       UpdateSimulOkBtn()
@@ -195,7 +206,7 @@ Public Class MultipleCut
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -213,6 +224,10 @@ Public Class MultipleCut
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      DepthTxBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -270,12 +285,31 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -283,18 +317,20 @@ Public Class MultipleCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -312,10 +348,9 @@ Public Class MultipleCut
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
       ' Disegno il taglio
       CreateMultipleCut()
@@ -343,12 +378,31 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -356,18 +410,18 @@ Public Class MultipleCut
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -383,10 +437,9 @@ Public Class MultipleCut
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio
@@ -419,7 +472,7 @@ Public Class MultipleCut
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -524,6 +577,7 @@ Public Class MultipleCut
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -552,19 +606,21 @@ Public Class MultipleCut
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateMultipleCut() As Boolean
@@ -580,15 +636,29 @@ Public Class MultipleCut
       ' Disattivo eventuali lavorazioni presenti
       DeactivateAllMachinings()
       ' Creo nuovo pezzo per il taglio diretto
-      Dim nPartId = EgtCreateGroup(GDB_ID.ROOT)
-      EgtSetName(nPartId, NAME_DIRECTCUT)
-      ' Creo layer di taglio
-      Dim nLayerId = EgtCreateGroup(nPartId)
+      Dim nPartId As Integer = CreateDirectCutPart()
+      Dim nLayerId As Integer = EgtCreateGroup(nPartId)
       EgtSetName(nLayerId, NAME_OUTLOOP)
       ' Creo il taglio
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
+
+      ' --- INIZIO GESTIONE SPECIALE --- per macchina sinistrorsa
+      ' Recupero spessore lama corrente
+      Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      EgtTdbSetCurrTool(sSaw)
+      Dim dThick As Double = 0
+      ' Se è impostata una lavorazione di lama
+      If Not String.IsNullOrEmpty(sSawing) Then
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      End If
+      If m_bSawTh And Not String.IsNullOrEmpty(sSawing) Then
+         EgtOffsetCurve(nCutId, -dThick, OFF_TYPE.EXTEND)
+      End If
+      ' ---  FINE  GESTIONE SPECIALE --- per macchina sinistrorsa
+
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, m_dAngV)
@@ -681,6 +751,7 @@ Public Class MultipleCut
    End Function
 
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
+      ptP += New Vector3d(0, 0, 0.15)
       ' Aggiungo crocette
       Dim vtCrossX As New Vector3d(20, 0, 0)
       Dim vtCrossY As New Vector3d(0, 20, 0)

DirectCuts/Polishing.xaml

@@ -1,11 +1,10 @@
 <UserControl x:Class="Polishing"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   mc:Ignorable="d" 
-   d:DesignHeight="597.3" d:DesignWidth="256">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             mc:Ignorable="d" d:DesignHeight="597.3" d:DesignWidth="256">
 
    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
@@ -36,13 +35,12 @@
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
-
          </Grid>
 
-         <ComboBox Name="PolishingCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+         <ComboBox Name="PolishingCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_ComboBox}" Margin="6,0,6,0">
             <ComboBox.ItemTemplate>
                <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
                </DataTemplate>
             </ComboBox.ItemTemplate>
          </ComboBox>
@@ -63,10 +61,14 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource SimulaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource EseguiImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
             <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
          </Grid>
 

DirectCuts/Polishing.xaml.vb

@@ -6,6 +6,8 @@ Public Class Polishing
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   Private m_refControlDirectCutUC As ControlsDirectCutUC1
+
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Flag di simulazione in corso
@@ -23,13 +25,14 @@ Public Class Polishing
 
    Private Sub Polishing_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' assegno messaggi
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      SimulBtn.ToolTip = EgtMsg(90301)    ' Simula
+      OkBtn.ToolTip = EgtMsg(90230)       ' Esegui
    End Sub
 
    Private Sub Polishing_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Attivo la pagina
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_refControlDirectCutUC = m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC1
       m_bActive = True
       ' Se rientro da simulazione
       If m_bSimul Then
@@ -60,7 +63,7 @@ Public Class Polishing
       If PolishingCmBx.SelectedIndex < 0 Then
          m_bPoliOk = False
          UpdateSimulOkBtn()
-      End If 
+      End If
       ' Rendo semitrasparente il grezzo
       Dim nRawSolidId = EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_RAW_SOLID)
       EgtSetAlpha( nRawSolidId, 60)
@@ -72,19 +75,21 @@ Public Class Polishing
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_refControlDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC1.DirectCutPages.DirectCut
          ' Cancello eventuali lucidature
          RemovePolishings()
+         ' Dichiaro polishing non più attivo
+         DirectCut.m_bPolishingOn = False
          ' Riattivo eventuali lavorazioni presenti
          ActivateAllMachinings()
-         ' Abilito registrazione progetto modificato
-         EgtEnableModified()
          ' Nascondo la macchina
          m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
          EgtSetMachineLook(MCH_LOOK.TAB)
          ' Ripristino opacità del grezzo
          Dim nRawSolidId = EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_RAW_SOLID)
          EgtSetAlpha( nRawSolidId, 100)
+         ' Abilito registrazione progetto modificato
+         EgtEnableModified()
          ' Aggiorno visualizzazione
          EgtDraw()
       End If
@@ -148,6 +153,7 @@ Public Class Polishing
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -176,19 +182,21 @@ Public Class Polishing
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreatePolishing( sKitName As String) As Boolean
@@ -205,6 +213,8 @@ Public Class Polishing
       Dim nKerfId As Integer = EgtGetFirstNameInGroup( m_CurrProjPage.m_nRawId, NAME_KERF)
       m_bPoliOk = AddPolishings( sKitName, nKerfId)
       EgtSetCurrPhase( 1)
+      ' Dichiaro polishing attivo
+      DirectCut.m_bPolishingOn = True
       Return m_bPoliOk
    End Function
 

DirectCuts/SawTestUC.xaml

@@ -1,12 +1,11 @@
 <UserControl x:Class="SawTestUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   mc:Ignorable="d" 
-   d:DesignHeight="597.3" d:DesignWidth="256">
-   
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             mc:Ignorable="d" d:DesignHeight="597.3" d:DesignWidth="256">
+
    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
 
@@ -38,40 +37,45 @@
             </Grid.ColumnDefinitions>
 
             <ToggleButton Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                          Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
             <ToggleButton Name="Point2Btn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                          Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
 
          </Grid>
 
-         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
-            Margin="6,0,6,0">
+         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_ComboBox}"
+                   Margin="6,0,6,0">
             <ComboBox.ItemTemplate>
                <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
                </DataTemplate>
             </ComboBox.ItemTemplate>
          </ComboBox>
 
          <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-   
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
          <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="3"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="4"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="OffsetTxBl" Grid.Column="0" Grid.Row="5"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="OffsetTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          <Grid Grid.Row="11" Grid.ColumnSpan="2">
             <Grid.ColumnDefinitions>
@@ -80,13 +84,17 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource SimulaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource EseguiImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
             <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
          </Grid>
-   
+
       </Grid>
 
    </Border>

DirectCuts/SawTestUC.xaml.vb

@@ -5,6 +5,7 @@ Public Class SawTestUC
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   Private m_refControlDirectCutUC As ControlsDirectCutUC1
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Flag di simulazione in corso
@@ -52,20 +53,20 @@ Public Class SawTestUC
 
    Private Sub SawTest_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
-      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
-      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(MSG_DIRECTCUTPAGEUC + 12)
-      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 25)
+      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(90224)     ' Lama
+      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(90212)   ' Laser
+      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(90225)    ' Disegno
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
-      DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
-      LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
-      DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
-      OffsetTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 28)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      Point1Btn.ToolTip = EgtMsg(90210)                  ' Acquisci P1
+      Point2Btn.ToolTip = EgtMsg(90211)                  ' Acquisici P2
+      DepthTxBl.Text = EgtMsg(90213)                     ' Affondamento
+      LenghtTxBl.Text = EgtMsg(90214)                    ' Lunghezza
+      DirectionTxBl.Text = EgtMsg(90215)                 ' Direzione
+      OffsetTxBl.Text = EgtMsg(90228)                    ' Offset
+      SimulBtn.ToolTip = EgtMsg(90301)                   ' Simula
+      OkBtn.ToolTip = EgtMsg(90230)                      ' Esegui
       ' Carico i dati dell'ultimo test
       m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_TEST_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
       m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_TEST_LENGTH, m_dLen, m_MainWindow.GetIniFile())
@@ -76,6 +77,7 @@ Public Class SawTestUC
    Private Sub SawTest_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Attivo la pagina
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_refControlDirectCutUC = m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC1
       m_bActive = True
       ' Se rientro da simulazione
       If m_bSimul Then
@@ -139,7 +141,7 @@ Public Class SawTestUC
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_TEST_OFFSET, DoubleToString( m_dOffset, 2), m_MainWindow.GetIniFile())
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_refControlDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC1.DirectCutPages.DirectCut1
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -208,17 +210,30 @@ Public Class SawTestUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         EgtSetCalcTool(m_sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
          ' Altrimenti da lama
@@ -226,10 +241,10 @@ Public Class SawTestUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -278,17 +293,30 @@ Public Class SawTestUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         EgtSetCalcTool(m_sSaw, "H1", 1)
+      End If
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
          ' Altrimenti da lama
@@ -296,10 +324,10 @@ Public Class SawTestUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(m_sSaw, "H1", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -349,7 +377,7 @@ Public Class SawTestUC
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -419,6 +447,7 @@ Public Class SawTestUC
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -447,19 +476,21 @@ Public Class SawTestUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleCut() As Boolean
@@ -483,9 +514,8 @@ Public Class SawTestUC
       ' Disattivo eventuali lavorazioni presenti
       DeactivateAllMachinings()
       ' Creo nuovo pezzo per il taglio diretto
-      Dim nPartId = EgtCreateGroup(GDB_ID.ROOT)
-      EgtSetName(nPartId, NAME_DIRECTCUT)
-      Dim nLayerId = EgtCreateGroup(nPartId)
+      Dim nPartId As Integer = CreateDirectCutPart()
+      Dim nLayerId As Integer = EgtCreateGroup(nPartId)
       EgtSetName(nLayerId, NAME_OUTLOOP)
       ' Creo il taglio
       Dim ptStart As Point3d = m_ptTipP1
@@ -499,6 +529,10 @@ Public Class SawTestUC
       ElseIf nWSide = MCH_SAW_WS.LEFT Then
          vtPerp = vtDir
          vtPerp.Rotate(Vector3d.Z_AX, +90)
+      Else
+         m_CurrProjPage.ClearMessage()
+         ' 91143 = Set machining side: right or left.
+         m_CurrProjPage.SetInfoMessage(EgtMsg(91143))
       End If
       Dim ptEnd As Point3d = ptStart + vtDir * m_dLen + vtPerp * dThick
       Dim dLen2 As Double = m_dLen / 2

DirectCuts/SingleCutAuto.xaml.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+
 Public Class SingleCutAuto
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
@@ -86,19 +87,19 @@ Public Class SingleCutAuto
 
    Private Sub SingleCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
-      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
-      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(MSG_DIRECTCUTPAGEUC + 12)
-      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 25)
+      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(90224)     ' Lama
+      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(90212)   ' Laser
+      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(90225)    ' Disegno
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' Assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
-      DiamLamaTxBl.Text = "Diamtero lama"
-      ThickLamaTxBl.Text = "Spessore lama"
-      ThickMatTxBl.Text = "Spessore materiale"
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      Point1Btn.Content = EgtMsg(90210)                  ' Acquisci P1
+      Point2Btn.Content = EgtMsg(90211)                  ' Acquisci P2
+      DiamLamaTxBl.Text = EgtMsg(90266)                  ' Diamtero lama
+      ThickLamaTxBl.Text = EgtMsg(90267)                 ' Spessore lama
+      ThickMatTxBl.Text = EgtMsg(90268)                  ' Spessore materiale
+      SimulBtn.Content = EgtMsg(90301)                   ' Simula
+      OkBtn.Content = EgtMsg(90230)                      ' Esegui
 
       m_RawHeight = GetPrivateProfileDouble(S_RAWPART, K_RAWHEIGHT, 30, m_MainWindow.GetIniFile())
       ThickMatTxBx.Text = LenToString(m_RawHeight, 2)
@@ -345,7 +346,7 @@ Public Class SingleCutAuto
          m_CurrProjPage.ClearMessage()
       Else
          OkBtn.IsEnabled = False
-         m_CurrProjPage.SetErrorMessage(EgtMsg(MSG_RAWPARTPAGEUC + 47))      ' Errore nella posizione o dimensione del grezzo
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90547))      ' Errore nella posizione o dimensione del grezzo
       End If
       Return True
    End Function
@@ -363,7 +364,7 @@ Public Class SingleCutAuto
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -715,6 +716,7 @@ Public Class SingleCutAuto
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -740,7 +742,7 @@ Public Class SingleCutAuto
       Dim bOk As Boolean = EgtGenerate(sCncPath, "OmagCut ver." & m_MainWindow.GetVersion())
       ' Se errore in generazione, segnalo l'errore ed esco
       If Not bOk Then
-         m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       ' Errore nella generazione del programma CN
          Return
       End If
       ' Download programma (eventuali errori sono segnalati dalla funzione)
@@ -758,7 +760,7 @@ Public Class SingleCutAuto
       ' reimposto il precedetne utensile e lavorazione
       m_MainWindow.m_CurrentMachine.sCurrSaw = m_PrecSaw
       m_MainWindow.m_CurrentMachine.sCurrSawing = m_PrecSawing
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleCut() As Boolean
@@ -781,8 +783,8 @@ Public Class SingleCutAuto
       ' Disattivo eventuali lavorazioni presenti
       DeactivateAllMachinings()
       ' Creo nuovo pezzo per il taglio diretto
-      Dim nPartId = CreateDirectCutPart()
-      Dim nLayerId = EgtCreateGroup(nPartId)
+      Dim nPartId As Integer = CreateDirectCutPart()
+      Dim nLayerId As Integer = EgtCreateGroup(nPartId)
       EgtSetName(nLayerId, NAME_OUTLOOP)
       ' Creo il taglio
       Dim ptStart As Point3d = m_ptTipP1

DirectCuts/SingleCutUC.xaml

@@ -1,14 +1,14 @@
 <UserControl x:Class="SingleCutUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   mc:Ignorable="d" 
-   d:DesignHeight="597.3" d:DesignWidth="256">
-   
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
+
    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
-   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">    
+   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
 
       <!-- Definizione della Grid SingleCut -->
       <Grid Name="SingleCutGrid" >
@@ -38,49 +38,56 @@
             </Grid.ColumnDefinitions>
 
             <ToggleButton Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                          Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Acquisisci-P1Img}" 
+                      Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
             <ToggleButton Name="Point2Btn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
 
          </Grid>
 
-         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_ComboBox}" Margin="6,0,6,0">
             <ComboBox.ItemTemplate>
                <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
                </DataTemplate>
             </ComboBox.ItemTemplate>
          </ComboBox>
 
          <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-   
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
          <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="3"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-   
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="4"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-   
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
          <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="5"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="OffsetTxBl" Grid.Column="0" Grid.Row="6"
-            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
          <EgtWPFLib:EgtTextBox Name="OffsetTxBx" Grid.Column="1" Grid.Row="6" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="SawThChBl" Grid.Row="7" Grid.ColumnSpan="2"
-             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="SawThChBx" Grid.Row="7" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
-             HorizontalAlignment="Right" Margin="0,0,6,0"/>
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <CheckBox Name="SawThChBx" Grid.Row="7" Grid.ColumnSpan="2" 
+                   Style="{DynamicResource OmagCut_CheckBox_Single}"
+                   HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
          <Grid Grid.Row="9" Grid.ColumnSpan="2">
             <Grid.ColumnDefinitions>
@@ -90,13 +97,13 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
             <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
             <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
             <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
          </Grid>
 
          <Grid Grid.Row="11" Grid.ColumnSpan="2">
@@ -106,10 +113,14 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource SimulaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource EseguiImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
             <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
          </Grid>
 

DirectCuts/SingleCutUC.xaml.vb

@@ -1,4 +1,6 @@
-Imports EgtUILib
+Imports System.Windows.Threading
+Imports EgtUILib
+Imports OmagCUT.MainWindow
 
 Public Class SingleCutUC
 
@@ -39,10 +41,14 @@ Public Class SingleCutUC
    Private m_nTempLay As Integer = GDB_ID.NULL
 
    ' Costanti
-   Private Const MAX_TAB_DEPTH As Double = 10.0
+   Private Const MAX_TAB_DEPTH As Double = 10.0  ' sostituita da un m_MaxTabDepth letto da file ini macchina
    Private Const MIN_CUT_LEN As Double = 10.0
    Private Const MAX_SIDE_ANG As Double = 60.0
    ' Costanti che indicano la modalità di acquisizione dei punti
+
+   ' Utilizzato per aggiornare la posizione della macchina
+   Private m_RefreshTimer As New DispatcherTimer
+
    Private Enum PT_MODE As Integer
       SAW = 0
       LASER = 1
@@ -51,31 +57,31 @@ Public Class SingleCutUC
 
    Private Sub SingleCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
-      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
-      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(MSG_DIRECTCUTPAGEUC + 12)
-      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 25)
+      m_PointsModeArray(PT_MODE.SAW) = EgtMsg(90224)     ' Lama
+      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(90212)   ' Laser
+      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(90225)    ' Disegno
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' Assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      Point2Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 11)
-      DepthTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 13)
-      LenghtTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 14)
-      DirectionTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 15)
-      SideAngleTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 16)
-      OffsetTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 28)
-      SawThChBl.Text = EgtMsg(90232)   ' Spessore lama
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      Point1Btn.ToolTip = EgtMsg(90210)                  ' Acquisci P1
+      Point2Btn.ToolTip = EgtMsg(90211)                  ' Acquisci P2
+      DepthTxBl.Text = EgtMsg(90213)                     ' Affondamento
+      LenghtTxBl.Text = EgtMsg(90214)                    ' Lunghezza
+      DirectionTxBl.Text = EgtMsg(90215)                 ' Direzione
+      SideAngleTxBl.Text = EgtMsg(90216)                 ' Inclinazione
+      OffsetTxBl.Text = EgtMsg(90228)                    ' Offset
+      SawThChBl.Text = EgtMsg(90232)                     ' Spessore lama
+      SimulBtn.ToolTip = EgtMsg(90301)                   ' Simula
+      OkBtn.ToolTip = EgtMsg(90230)                      ' Esegui
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dAngV = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dLen = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_ANGV, m_dAngV, m_MainWindow.GetIniFile())
       m_dOffset = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_OFFSET, m_dOffset, m_MainWindow.GetIniFile())
       m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
-      m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
    End Sub
 
    Private Sub SingleCut_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -92,6 +98,10 @@ Public Class SingleCutUC
          m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
          EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
          EgtDraw()
+         ' riavvio il timer per visualizzare la poszione della macchina
+         If Not IsNothing(m_RefreshTimer) Then
+            m_RefreshTimer.Start()
+         End If
          Return
       End If
       ' Disabilito registrazione progetto modificato
@@ -114,7 +124,7 @@ Public Class SingleCutUC
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -137,24 +147,48 @@ Public Class SingleCutUC
       Point2Btn.IsEnabled = False
       ' Deseleziono bottone primo punto
       Point1Btn.IsChecked = False
+
+      ' forzo la verifica dell'affondamento in relazione allo spessore del pezzo
+      DepthTxBx_EgtClosed(Nothing, Nothing)
+      ' la visualizzazione dei comandi è gestita dalla DirectCutPageUC richiamando la funzione ReloadParam
+
+      ' forzo la macchina ad essere visibile fin da subito
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
+      m_MainWindow.m_DirectCutPageUC.m_nMachLook = MCH_LOOK.TAB
+      ' Creo il timer il timer per aggiornare il posizionamento della macchina
+      AddHandler m_RefreshTimer.Tick, AddressOf RefreshTimer_tick
+      m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(1000)
+
       ' Aggiorno visualizzazione
       EgtDraw()
+
+      ' Avvio il timer
+      m_RefreshTimer.Start()
+   End Sub
+
+   Private Sub RefreshTimer_tick()
+      ' se è impostata la visualizzazione della sola tavola allora non aggiorno il disegno
+      If m_MainWindow.m_DirectCutPageUC.m_nMachLook = MCH_LOOK.TAB Then Return
+      ' Aggiorno visualizzazione
+      SetMachineInCurrPos()
+      ' Aggiorno il disegno
+      EgtDraw()
    End Sub
 
    Friend Sub SingleCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_LENGTH, DoubleToString( m_dLen, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_ANGV, DoubleToString( m_dAngV, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_LENGTH, DoubleToString(m_dLen, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_ANGV, DoubleToString(m_dAngV, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_OFFSET, DoubleToString(m_dOffset, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_SAWTH, If(m_bSawTh, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -168,10 +202,18 @@ Public Class SingleCutUC
          EgtSetMachineLook(MCH_LOOK.TAB)
          EgtDraw()
       End If
+      ' interrompo il Timer per aggiornare la visualizzazione del posizionamento macchina 
+      m_RefreshTimer.Stop()
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      ' se macchina solo WaterJet Disabilito/Nascondo parametri della lama
+      DepthTxBx.IsEnabled = bIsSaw
+      SawThChBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -229,11 +271,30 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizione lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -241,18 +302,20 @@ Public Class SingleCutUC
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
+            EgtOutLog("Coordinate punto 1 da H3: " & m_ptTipP1.x.ToString & " ," & m_ptTipP1.y.ToString)
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
+            EgtOutLog("Coordinate punto 1 da H1: " & m_ptTipP1.x.ToString & " ," & m_ptTipP1.y.ToString)
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -264,17 +327,15 @@ Public Class SingleCutUC
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP1
          m_ptTipP1 = m_ptPrev
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Disegno il taglio
@@ -284,6 +345,7 @@ Public Class SingleCutUC
       m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
       EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
       EgtDraw()
+
       ' Seleziono il bottone per indicare che il primo punto è stato acquisito
       Point1Btn.IsChecked = True
       ' Abilito e deseleziono secondo punto
@@ -303,11 +365,30 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      If bIsMultiCut Then
+         m_MainWindow.m_DirectCutPageUC.ReloadParam()
+      End If
+
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Ricavo dati lama corrente
          Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
          ' Se punto da laser
@@ -315,18 +396,20 @@ Public Class SingleCutUC
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
+            EgtOutLog("Coordinate punto 2 da H3: " & m_ptTipP2.x.ToString & " ," & m_ptTipP2.y.ToString)
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP2) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP2) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
@@ -336,17 +419,15 @@ Public Class SingleCutUC
          m_dAngV = 90 - dTAngV
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio
@@ -361,6 +442,7 @@ Public Class SingleCutUC
          m_dAngO = dAngOrizzDeg
          LenghtTxBx.Text = LenToString(m_dLen, 1)
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+         EgtOutLog("Lunghezza taglio: " & dLen.ToString & "Angolo: " & dAngOrizzDeg.ToString)
          CreateSingleCut()
          ' Disegno la macchina nella sua posizione reale
          SetMachineInCurrPos()
@@ -378,7 +460,7 @@ Public Class SingleCutUC
 
    Private Sub DepthTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DepthTxBx.EgtClosed
       ' Verifico che l'affondamento impostato non sia superiore a quello massimo
-      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + MAX_TAB_DEPTH
+      Dim dMaxDepth = m_ptRawMax.z - m_ptRawMin.z + m_MainWindow.m_CurrentMachine.MaxTabDepth
       Dim dDepth As Double = 0
       StringToLen(DepthTxBx.Text, dDepth)
       If dDepth < 0 Then
@@ -456,7 +538,7 @@ Public Class SingleCutUC
       EgtDraw()
    End Sub
 
-   Private Sub SawThick_Click( sender As Object, e As RoutedEventArgs) Handles SawThChBx.Click
+   Private Sub SawThick_Click(sender As Object, e As RoutedEventArgs) Handles SawThChBx.Click
       ' Recupero lo stato di check
       m_bSawTh = SawThChBx.IsChecked()
       ' Disegno il taglio
@@ -504,6 +586,7 @@ Public Class SingleCutUC
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -515,9 +598,9 @@ Public Class SingleCutUC
       m_CurrProjPage.SetWarningMessage( "Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -532,24 +615,27 @@ Public Class SingleCutUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
          ' lancio eventuale lua post-trasmissione
-         m_MainWindow.ExecSentProgScript( True)
+         m_MainWindow.ExecSentProgScript(True)
       End If
 #End If
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleCut() As Boolean
       ' Verifico sia definito il punto iniziale e il grezzo
       If Not m_bPointP1Ok Or Not m_bRawOk Then
+         EgtOutLog("Primo punto non valido")
          m_bCutOk = False
          Return False
       End If
@@ -559,29 +645,40 @@ Public Class SingleCutUC
       Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
       ' Recupero spessore lama corrente
       Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       EgtTdbSetCurrTool(sSaw)
       Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      ' Se è impostata una lavorazione di lama
+      If Not String.IsNullOrEmpty(sSawing) Then
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      End If
       ' Rimuovo eventuale vecchio pezzo per taglio diretto
       EraseDirectCutPart()
       ' Disattivo eventuali lavorazioni presenti
       DeactivateAllMachinings()
       ' Creo nuovo pezzo per il taglio diretto
-      Dim nPartId = CreateDirectCutPart()
-      Dim nLayerId = EgtCreateGroup(nPartId)
+      Dim nPartId As Integer = CreateDirectCutPart()
+      Dim nLayerId As Integer = EgtCreateGroup(nPartId)
       EgtSetName(nLayerId, NAME_OUTLOOP)
       ' Creo il taglio
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
-      If Math.Abs(m_dOffset) > 10 * EPS_SMALL Then
-         Dim dTotOffset = m_dOffset
-         If m_bSawTh Then dTotOffset += If( m_dOffset > 0, dThick, -dThick)
+      ' Applico la correzione di spessore lama -> anche se Offset=0! ver_2.5b1
+      Dim dTotOffset = m_dOffset
+      If m_bSawTh Then
+         dTotOffset += If(m_dOffset > 0, dThick, -dThick)
+         EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
+      Else
          EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
       End If
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, m_dAngV)
+      ' Inidico che è un taglio Diretto di tipo SingleCut
+      EgtSetInfo(nCutId, INFO_DIRECTCUT, FlagDirectCuts.SingleCut)
+      ' Imposto se disabilitare l'inversine di direzione del taglio
+      If Not m_MainWindow.m_CurrentMachine.bEnableInvert Then EgtSetInfo(nCutId, INFO_ENABLE_INVERT, 0)
       ' Creo layer per crocetta di riferimento
       Dim nCrossLayerId = EgtCreateGroup(nPartId)
       ' Aggiungo crocetta/e

DirectCuts/SingleDrillUC.xaml

@@ -1,91 +1,96 @@
 <UserControl x:Class="SingleDrillUC"
              xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   mc:Ignorable="d" 
-   d:DesignHeight="597.3" d:DesignWidth="256">
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             mc:Ignorable="d" d:DesignHeight="597.3" d:DesignWidth="256">
 
-    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
-    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
+   <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
+   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
 
-        <!-- Definizione della Grid SingleCut -->
-        <Grid Name="SingleCutGrid" >
+      <!-- Definizione della Grid SingleCut -->
+      <Grid Name="SingleCutGrid" >
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="2*"/>
+            <ColumnDefinition Width="1*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1*"/>
+         </Grid.RowDefinitions>
+
+         <Grid Grid.Row="0" Grid.ColumnSpan="2">
             <Grid.ColumnDefinitions>
-                <ColumnDefinition Width="2*"/>
-                <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
-            <Grid.RowDefinitions>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="0.5*"/>
-                <RowDefinition Height="0.5*"/>
-                <RowDefinition Height="0.5*"/>
-                <RowDefinition Height="0.5*"/>
-                <RowDefinition Height="0.5*"/>
-                <RowDefinition Height="0.5*"/>
-                <RowDefinition Height="0.5*"/>
-                <RowDefinition Height="0.5*"/>
-                <RowDefinition Height="0.5*"/>
-                <RowDefinition Height="0.5*"/>
-                <RowDefinition Height="1*"/>
-            </Grid.RowDefinitions>
 
-            <Grid Grid.Row="0" Grid.ColumnSpan="2">
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="1*"/>
-                </Grid.ColumnDefinitions>
+            <ToggleButton Name="Point1Btn" Grid.Column="0"
+                          Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource Acquisisci-PImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
 
-                <ToggleButton Name="Point1Btn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-      
 
-            </Grid>
+         </Grid>
 
-            <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
-                <ComboBox.ItemTemplate>
-                    <DataTemplate>
-                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                    </DataTemplate>
-                </ComboBox.ItemTemplate>
-            </ComboBox>
+         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_ComboBox}" Margin="6,0,6,0">
+            <ComboBox.ItemTemplate>
+               <DataTemplate>
+                  <TextBlock Text="{Binding}" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+               </DataTemplate>
+            </ComboBox.ItemTemplate>
+         </ComboBox>
 
- 
 
-            <Grid Grid.Row="9" Grid.ColumnSpan="2">
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="0.5*"/>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="0.5*"/>
-                    <ColumnDefinition Width="1*"/>
-                </Grid.ColumnDefinitions>
-                <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            </Grid>
 
-            <Grid Grid.Row="11" Grid.ColumnSpan="2">
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="1*"/>
-                </Grid.ColumnDefinitions>
+         <Grid Grid.Row="9" Grid.ColumnSpan="2">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+            <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+            <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+            <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         </Grid>
 
-                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueTextButton}"/>
-                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-            </Grid>
+         <Grid Grid.Row="11" Grid.ColumnSpan="2">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
 
-        </Grid>
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource SimulaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource EseguiImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
 
-    </Border>
+      </Grid>
+
+   </Border>
 
 </UserControl>

DirectCuts/SingleDrillUC.xaml.vb

@@ -1,4 +1,6 @@
 Imports EgtUILib
+Imports OmagCUT.MainWindow
+
 Public Class SingleDrillUC
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
@@ -37,6 +39,8 @@ Public Class SingleDrillUC
 
    Private m_dDiameter As Double = 0
 
+   Private m_sCurrDrill As String = String.Empty
+
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
    Private Const MIN_CUT_LEN As Double = 10.0
@@ -54,21 +58,28 @@ Public Class SingleDrillUC
       m_CurrentMachine = m_MainWindow.m_CurrentMachine
 
       ' Creo lista modalità di acquisizione punto 
-      m_PointsModeArray(PT_MODE.DRILL) = EgtMsg(90752)
-      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(MSG_DIRECTCUTPAGEUC + 12)
-      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 25)
+      m_PointsModeArray(PT_MODE.DRILL) = EgtMsg(90752)      ' Foretto
+      m_PointsModeArray(PT_MODE.LASER) = EgtMsg(90212)      ' Laser
+      m_PointsModeArray(PT_MODE.DRAW) = EgtMsg(90225)       ' Disegno
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
 
       ' Assegno messaggi
-      Point1Btn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 10)
-      SimulBtn.Content = EgtMsg(MSG_CADCUTPAGEUC + 1)
-      OkBtn.Content = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      Point1Btn.ToolTip = EgtMsg(90210)                     ' Acquisici P1
+      SimulBtn.ToolTip = EgtMsg(90301)                      ' Simula
+      OkBtn.ToolTip = EgtMsg(90230)                         ' Esegui
    End Sub
 
    Private Sub SingleDrill_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      m_sCurrDrill = m_CurrentMachine.sCurrDrill
+      If String.IsNullOrWhiteSpace(m_sCurrDrill) Then m_sCurrDrill = GetDrillFromDrilling(m_CurrentMachine.sCurrDrilling)
+      ' rimuovo utensile su uscite 1
+      EgtSetCalcTool("", "H1", 1)
+      ' imposto utensile su uscita 2
+      EgtSetCalcTool(m_sCurrDrill, "H1", 2)
       ' recupero informazioni del foretto usato
-      EgtTdbSetCurrTool(m_CurrentMachine.sCurrDrill)
+      EgtTdbSetCurrTool(m_sCurrDrill)
+      m_dDiameter = 0
       EgtTdbGetCurrToolParam(MCH_TP.DIAM, m_dDiameter)
 
       ' Attivo la pagina
@@ -130,7 +141,7 @@ Public Class SingleDrillUC
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -207,21 +218,33 @@ Public Class SingleDrillUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' forzo utilizzo testa H1 solo per macchina con 2 teste
+      Dim bIsMultiCut As Boolean = (EgtGetHeadId("H101") <> GDB_ID.NULL)
+      ' Ricavo dati lama corrente
+      Dim sDrill As String = m_sCurrDrill
+      If bIsMultiCut Then
+         EgtSetCalcTool(sDrill, "H1", 2)
+      End If
+
       ' Se acquisizione lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.DRILL Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
          ' Recupero la posizione macchina
          Dim dL1, dL2, dL3, dR1, dR2 As Double
          If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return
-
-         ' Ricavo dati Foretto corrente
-         Dim sDrill As String = m_MainWindow.m_CurrentMachine.sCurrDrill
+         ' Se macchina multicut il primo asse rotante restituito è quello della tavola 
+         Dim vAng() As Double = {dR1, dR2, 0}
+         If bIsMultiCut Then
+            vAng(0) = 0
+            vAng(1) = dR1
+            vAng(2) = dR2
+         End If
          ' Se punto da laser
          If PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
             ' Imposto come testa corrente il laser (senza utensile ovviamente)
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
             ' Altrimenti da lama
@@ -229,10 +252,10 @@ Public Class SingleDrillUC
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
             ' Trasformo in posizione punta utensile in basso
-            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
+            If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
          End If
          ' Calcolo direzione asse lama
-         If Not EgtGetCalcToolDirFromAngles(dR1, dR2, m_vtToolP1) Then Return
+         If Not EgtGetCalcToolDirFromAngles(vAng, m_vtToolP1) Then Return
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
@@ -244,10 +267,8 @@ Public Class SingleDrillUC
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrDrill
          ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
       End If
 
       ' Disegno il taglio
@@ -261,6 +282,42 @@ Public Class SingleDrillUC
       Point1Btn.IsChecked = True
    End Sub
 
+   'Private Sub GetDrillFromDrilling(ByRef sCurrDrill As String)
+   '   If String.IsNullOrEmpty(sCurrDrill) Or String.IsNullOrWhiteSpace(sCurrDrill) Then
+   '      ' creo l'elenco degli utensili di foratura
+   '      Dim sToolName As String = String.Empty
+   '      Dim nType As Integer = MCH_TY.NONE
+   '      Dim DrillToolList As New ObservableCollection(Of String)
+   '      DrillToolList.Clear()
+   '      If EgtTdbGetFirstTool(MCH_TF.DRILLBIT, sToolName, nType) Then
+   '         DrillToolList.Add(sToolName)
+   '         While EgtTdbGetNextTool(MCH_TF.DRILLBIT, sToolName, nType)
+   '            DrillToolList.Add(sToolName)
+   '         End While
+   '      End If
+   '      ' recupero l'utensile associato alla lavorazione
+   '      Dim sCurrDrilling As String = m_MainWindow.m_CurrentMachine.sCurrDrilling
+   '      Dim ToolString As String = String.Empty
+   '      EgtMdbSetCurrMachining(sCurrDrilling)
+   '      ' Recupero nome utensile tramite TUUID
+   '      Dim sTuuid As String = String.Empty
+   '      EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sTuuid)
+   '      EgtTdbGetToolFromUUID(sTuuid, ToolString)
+   '      Dim bToolExist As Boolean = False
+   '      For Each CurrTool As IEnumerable In DrillToolList
+   '         If CurrTool.ToString() = ToolString Then
+   '            bToolExist = True
+   '            Exit For
+   '         End If
+   '      Next
+   '      If bToolExist Then
+   '         sCurrDrill = ToolString
+   '      Else
+   '         sCurrDrill = String.Empty
+   '      End If
+   '   End If
+   'End Sub
+
    Private Sub XcoordTxBx_EgtClosed(sender As Object, e As EventArgs) Handles XcoordTxBx.EgtClosed
       ' Recupero il valore della coordinata (in 0 Tab)
       Dim dXcoord As Double = 0
@@ -300,6 +357,7 @@ Public Class SingleDrillUC
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -328,8 +386,10 @@ Public Class SingleDrillUC
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
          Return
       End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
       ' Download programma (eventuali errori sono segnalati dalla funzione)
-      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
          ' copio il progetto corrente come progetto in lavorazione
          Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
          My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
@@ -340,7 +400,7 @@ Public Class SingleDrillUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleDrill() As Boolean
@@ -353,33 +413,35 @@ Public Class SingleDrillUC
       EgtEmptyGroup(m_nTempLay)
       ' Spessore grezzo
       Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
-      ' Recupero spessore lama corrente
-      Dim sDrill As String = m_MainWindow.m_CurrentMachine.sCurrDrill
+      ' Recupero diametro foretto corrente
+      Dim sDrill As String = m_sCurrDrill
+      If String.IsNullOrWhiteSpace( sDrill) Then sDrill = GetDrillFromDrilling(m_MainWindow.m_CurrentMachine.sCurrDrilling)
       EgtTdbSetCurrTool(sDrill)
-      Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      m_dDiameter = 0
+      EgtTdbGetCurrToolParam(MCH_TP.DIAM, m_dDiameter)
       ' Rimuovo eventuale vecchio pezzo per taglio diretto
       EraseDirectCutPart()
       ' Disattivo eventuali lavorazioni presenti
       DeactivateAllMachinings()
 
       ' Creo nuovo pezzo per il taglio diretto
-      Dim nPartId = CreateDirectCutPart()
-      Dim nLayerId = EgtCreateGroup(nPartId)
+      Dim nPartId As Integer = CreateDirectCutPart()
+      Dim nLayerId As Integer = EgtCreateGroup(nPartId)
       EgtSetName(nLayerId, NAME_INLOOP)
       ' Creo il Drill
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
 
       ' Creo layer per crocetta di riferimento
-      Dim nCrossLayerId = EgtCreateGroup(nPartId)
+      Dim nCrossLayerId As Integer = EgtCreateGroup(nPartId)
       ' Aggiungo crocetta/e
       If m_bPointP1Ok Then
          CreateCross(nCrossLayerId, ptStart)
       End If
 
       Dim nCutId = EgtCreateCircle(nLayerId, ptStart, m_dDiameter / 2)
-
+      ' Indico che è un taglio Diretto di tipo SingleDrill
+      EgtSetInfo(nCutId, INFO_DIRECTCUT, FlagDirectCuts.SingleDrill)
       ' Calcolo punto di inserimento nel grezzo
       Dim ptMin, ptMax As Point3d
       EgtGetBBoxGlob(nPartId, GDB_BB.STANDARD, ptMin, ptMax)
@@ -387,9 +449,9 @@ Public Class SingleDrillUC
       ptIns.z = dRawHeight
       ' Inserisco il pezzo nel grezzo
       EgtAddPartToRawPart(nPartId, ptIns, m_MainWindow.m_CurrentProjectPageUC.m_nRawId)
+      EgtSetCurrPhase(1)
       ' Inserisco la lavorazione
       m_bCutOk = AddMachinings(nPartId) AndAlso UpdateAllMachiningsToolpaths()
-      EgtSetCurrPhase(1)
       ' Eventuale eliminazione Home finale
       If Not m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome Then
          RemoveFinalHome()

DirectCuts/SquaringUC.xaml

@@ -0,0 +1,161 @@
+<UserControl x:Class="SquaringUC"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             mc:Ignorable="d" d:DesignHeight="597.3" d:DesignWidth="256">
+
+   <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{StaticResource OmagCut_LightGray}">-->
+   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
+
+      <!-- Definizione della Grid MultipleCut -->
+      <Grid Name="SingleCutGrid" >
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="2*"/>
+            <ColumnDefinition Width="1*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="2*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1*"/>
+         </Grid.RowDefinitions>
+
+         <!--<Grid Grid.Row="0" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+            </Grid>-->
+
+         <!--<ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
+            Margin="6,0,6,0">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>-->
+
+         <!--<TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+         <TextBlock Name="OffsetTxBl" Grid.Column="0" Grid.Row="3"
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="OffsetTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+         <TextBlock Name="ExtraLenTxBl" Grid.Column="0" Grid.Row="4"
+                    Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="ExtraLenTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+         <!--<TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
+            <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="4"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+         <!--<Grid Grid.Row="5" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1.5*"/>
+                    <ColumnDefinition Width="2"/>
+                    <ColumnDefinition Width="1.5*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                </Grid.RowDefinitions>
+
+                <Border Grid.Column="1" Grid.Row="0" Grid.RowSpan="4" Background="Black" />
+
+                <TextBlock Name="NumPzXTxBl" Grid.Column="0" Grid.Row="0"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <TextBlock Name="DimPzXTxBl" Grid.Column="2" Grid.Row="0"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+
+                <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                <EgtWPFLib:EgtTextBox Name="DimPzXTxBx" Grid.Column="2" Grid.Row="1" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}" />
+
+                <TextBlock Name="NumPzYTxBl" Grid.Column="0" Grid.Row="2"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <TextBlock Name="DimPzYTxBl" Grid.Column="2" Grid.Row="2"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+
+                <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                <EgtWPFLib:EgtTextBox Name="DimPzYTxBx" Grid.Column="2" Grid.Row="3" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}" />
+
+            </Grid>
+
+            <TextBlock Name="SideTxBl" Grid.Row="6" Grid.ColumnSpan="2"
+             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <CheckBox Name="SideChBx" Grid.Row="6" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Right" Margin="0,0,6,0"/>-->
+
+         <Grid Grid.Row="7" Grid.ColumnSpan="2">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+            <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+            <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+                       Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+            <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         </Grid>
+
+         <Grid Grid.Row="11" Grid.ColumnSpan="2">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource SimulaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource EseguiImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
+
+      </Grid>
+
+   </Border>
+</UserControl>

DirectCuts/SquaringUC.xaml.vb

@@ -0,0 +1,449 @@
+Imports EgtUILib
+Imports OmagCUT.MainWindow
+
+Public Class SquaringUC
+
+   ' Riferimenti a pagine
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   ' Flag di pagina attiva
+   Private m_bActive As Boolean = False
+   ' Flag di simulazione in corso
+   Private m_bSimul As Boolean = False
+
+   ' Origine tavola e dati grezzo
+   Private m_bRawOk As Boolean = False
+   Private m_ptTabOri As Point3d
+   Private m_ptRawMin As Point3d
+   Private m_ptRawMax As Point3d
+   ' Parametri P1 acquisito
+   Private m_ptTipP1 As Point3d
+   Private m_vtToolP1 As Vector3d
+   ' Parametri P2 acquisito
+   Private m_ptTipP2 As Point3d
+   Private m_vtToolP2 As Vector3d
+   ' Parametri della lavorazione
+   Private m_bCutOk As Boolean = False
+   Private m_dDepth As Double = 0
+   Private m_dOffsetSquaring As Double = 150
+   Private m_dExtraLength As Double = 0
+   Private m_dAngO As Double = 180
+   Private m_dAngV As Double = 0
+   Private m_nNumX As Integer = 0
+   Private m_dDimX As Double = 0
+   Private m_nNumY As Integer = 0
+   Private m_dDimY As Double = 0
+   Private m_bHeadSide As Boolean = False
+
+   ' Punto selezionato nel disegno
+   Private m_ptPrev As Point3d
+   ' Layer per crocette temporanee
+   Private m_nTempLay As Integer = GDB_ID.NULL
+
+   ' Costanti
+   Private Const MAX_TAB_DEPTH As Double = 10.0
+   Private Const MIN_CUT_LEN As Double = 10.0
+   Private Const MAX_SIDE_ANG As Double = 60.0
+
+   'Costante che indica il lato in cui posizionare i tagli
+   Private Enum CutSide As Integer
+      Left
+      Right
+   End Enum
+
+   Private Sub GridCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      OffsetTxBl.Text = EgtMsg(90228)        ' Offset
+      ExtraLenTxBl.Text = EgtMsg(90260)      ' Extra length
+      SimulBtn.ToolTip = EgtMsg(90301)       ' Simula
+      OkBtn.ToolTip = EgtMsg(90230)          ' Esegui
+
+      ' Carico i dati dell'ultimo taglio
+      m_dOffsetSquaring = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_OFFSET_SQUARING, m_dOffsetSquaring, m_MainWindow.GetIniFile())
+      m_dExtraLength = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_EXTRA_LEN_SQUARING, m_dExtraLength, m_MainWindow.GetIniFile())
+      m_dDepth = 0
+      m_dAngO = 90
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_nNumX = 1
+      m_dDimX = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
+      m_nNumY = 1
+      m_dDimY = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMY, m_dDimY, m_MainWindow.GetIniFile())
+      m_bHeadSide = False
+   End Sub
+
+   Private Sub Squaring_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      ' Attivo la pagina
+      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_bActive = True
+      ' Se rientro da simulazione
+      If m_bSimul Then
+         m_bSimul = False
+         ' Disabilito registrazione progetto modificato
+         EgtDisableModified()
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+         Return
+      End If
+      ' Disabilito registrazione progetto modificato
+      EgtDisableModified()
+      ' Creo layer temporaneo per crocette
+      m_nTempLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
+      ' Origine tavola
+      m_bRawOk = True
+      If Not EgtGetTableRef(1, m_ptTabOri) Then
+         m_bRawOk = False
+         EgtOutLog("Error on TableRef1")
+      End If
+
+      ' Dati del grezzo
+      If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then
+         m_bRawOk = False
+         EgtOutLog("Error on RawBox")
+      End If
+      ' calcolo lalavorazione di squadratura
+      RefreshSquaring()
+   End Sub
+
+   Private Sub RefreshSquaring()
+      If Not m_bRawOk Then Return
+
+      Dim m_ThickSaw As Double
+      EgtTdbGetCurrToolParam(MCH_TP.THICK, m_ThickSaw)
+
+      m_dDepth = CamAuto.GetRawHeight()
+      m_dDimX = Math.Abs(m_ptRawMax.x - m_ptRawMin.x) - 2 * (m_dOffsetSquaring)
+      m_dDimY = Math.Abs(m_ptRawMax.y - m_ptRawMin.y) - 2 * (m_dOffsetSquaring)
+
+      Dim ptStart As New Point3d(m_ptRawMin.x + m_dOffsetSquaring - m_ThickSaw, m_ptRawMin.y + m_dOffsetSquaring, m_ptRawMin.z)
+      Dim ptEnd As New Point3d(ptStart.x + m_dDimX, ptStart.y, m_ptRawMin.z)
+
+      SetCoordVisibility(True)
+      ShowCoord()
+
+      OffsetTxBx.Text = LenToString(m_dOffsetSquaring, 1)
+      ExtraLenTxBx.Text = LenToString(m_dExtraLength, 1)
+      m_bCutOk = False
+      UpdateSimulOkBtn()
+
+      SquaringPoint(ptStart, ptEnd)
+      m_ptPrev = ptStart
+   End Sub
+
+   Friend Sub Squaring_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      ' Salvo i dati correnti
+      ' Salvo i dati correnti
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_OFFSET_SQUARING, DoubleToString(m_dOffsetSquaring, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_EXTRA_LEN_SQUARING, DoubleToString(m_dExtraLength, 2), m_MainWindow.GetIniFile())
+      ' Se non vado in simulazione
+      If Not m_bSimul Then
+         ' Dichiaro sottopagina da non riattivare
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
+         ' Rimuovo layer temporaneo per crocette
+         EgtErase(m_nTempLay)
+         ' Rimuovo eventuale pezzo per taglio diretto
+         EraseDirectCutPart()
+         ' Riattivo eventuali lavorazioni presenti
+         ActivateAllMachinings()
+         ' Abilito registrazione progetto modificato
+         EgtEnableModified()
+         ' Nascondo la macchina
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+      End If
+      ' Dichiaro pagina non attiva
+      m_bActive = False
+   End Sub
+
+   Private Sub UpdateSimulOkBtn()
+      If m_bCutOk Then
+         SimulBtn.IsEnabled = True
+         SimulBtn.Foreground = Brushes.Black
+         OkBtn.IsEnabled = True
+         OkBtn.Foreground = Brushes.Black
+      Else
+         SimulBtn.IsEnabled = False
+         SimulBtn.Foreground = Brushes.DarkGray
+         OkBtn.IsEnabled = False
+         OkBtn.Foreground = Brushes.DarkGray
+      End If
+   End Sub
+
+   Private Sub SquaringPoint(ptMin As Point3d, ptMax As Point3d)
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Verifico configurazione tavola e grezzo
+      If Not m_bRawOk Then Return
+
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+      '------------- BOTTOM LEFT -------------------
+      ' Assegno punto selezionato nel disegno a m_ptTipP1
+      m_ptTipP1 = ptMin
+      ' Porto il tip nell'origine tavola
+      m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
+      ' Reimposto eventuale precedente utensile
+      EgtSetCalcTool(sTool, sHead, nExit)
+      '-------------  TOP RIGHT   -------------------
+      ' Assegno punto selezionato nel disegno a m_ptTipP2
+      m_ptTipP2 = ptMax
+      ' Porto il tip nell'origine tavola
+      m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
+      ' Reimposto eventuale precedente utensile
+      EgtSetCalcTool(sTool, sHead, nExit)
+
+      ' Se il secondo punto non coincide con il primo, disegno il taglio
+      Dim vtDiff As Vector3d = m_ptTipP2 - m_ptTipP1
+      vtDiff.z = 0
+      Dim dLen As Double
+      Dim dAngVertDeg As Double
+      Dim dAngOrizzDeg As Double
+      vtDiff.ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
+      If dLen > EPS_SMALL Then
+         m_dAngO = dAngOrizzDeg
+         CreateGridCut()
+         ' visuliazzo tavola 
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+      End If
+   End Sub
+
+   Private Sub OffsetTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsetTxBx.EgtClosed
+      ' Verifico che l'offset impostato non sia superiore a quello massimo
+      Dim dMaxOffset As Double = Math.Min(m_dDimX, m_dDimY) / 2 - 15
+      Dim dOffset As Double = 0
+      StringToLen(OffsetTxBx.Text, dOffset)
+      If dOffset < 0 Then
+         dOffset = 0
+      ElseIf dOffset > dMaxOffset Then
+         dOffset = dMaxOffset
+      End If
+      m_dOffsetSquaring = dOffset
+      OffsetTxBx.Text = LenToString(m_dOffsetSquaring, 2)
+      ' Disegno il taglio
+      RefreshSquaring()
+      EgtDraw()
+   End Sub
+
+   Private Sub ExtraLength_EgtClosed(sender As Object, e As EventArgs) Handles ExtraLenTxBx.EgtClosed
+      ' Verifico che il valore indicato sia almeno maggiore dell'offset indicato
+      Dim dOffset As Double = 0
+      StringToLen(OffsetTxBx.Text, dOffset)
+      Dim MadExtraLeng As Double = Math.Abs(dOffset)
+      Dim dExtraLen As Double
+      StringToLen(ExtraLenTxBx.Text, dExtraLen)
+      If dExtraLen < 0 AndAlso dExtraLen < -MadExtraLeng Then
+         dExtraLen = 0
+      End If
+      m_dExtraLength = dExtraLen
+      ExtraLenTxBx.Text = LenToString(m_dExtraLength, 2)
+      ' Disegno il taglio
+      RefreshSquaring()
+      EgtDraw()
+   End Sub
+
+   Private Sub SimulBtn_Click(sender As Object, e As RoutedEventArgs) Handles SimulBtn.Click
+      ' Verifico ci sia un taglio valido
+      If Not m_bCutOk Then Return
+      ' Salvo il progetto con le lavorazioni
+      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\" & "DirectProj.nge"
+      m_MainWindow.m_CurrentProjectPageUC.SaveFile(sMchPath, False)
+      ' Predispongo passaggio a simulazione
+      m_bSimul = True
+      m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
+      m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
+      m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
+      m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
+      m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.Simulation
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+#If TRIAL Then
+      m_CurrProjPage.SetWarningMessage("Trial Version")
+#Else
+      ' Verifico non sia versione Ufficio
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
+      End If
+      ' Verifico ci sia un taglio valido
+      If Not m_bCutOk Then Return
+      ' Salvo il progetto con le lavorazioni
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\" & "DirectProj.nge"
+      m_MainWindow.m_CurrentProjectPageUC.SaveFile(sMchPath, False)
+      ' Genero file CNC (lancio anche se errore in precedenza)
+      Dim sCncPath As String = m_MainWindow.GetCncDir() & "\DirectCut" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+      Dim bOk As Boolean = EgtGenerate(sCncPath, "OmagCut ver." & m_MainWindow.GetVersion())
+      ' Se errore in generazione, segnalo l'errore ed esco
+      If Not bOk Then
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
+         Return
+      End If
+      Dim sNameProg As Integer = 900
+      sNameProg = GetPrivateProfileInt(S_PARTPROGRAM, "NameProg", sNameProg, m_MainWindow.GetMachIniFile)
+      ' Download programma (eventuali errori sono segnalati dalla funzione)
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, sNameProg) Then
+         ' copio il progetto corrente come progetto in lavorazione
+         Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
+         My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
+         ' lancio eventuale lua post-trasmissione
+         m_MainWindow.ExecSentProgScript(True)
+      End If
+#End If
+   End Sub
+
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
+   End Sub
+
+   Private Function CreateGridCut() As Boolean
+      ' Verifico sia definito il punto iniziale e il grezzo
+      If Not m_bRawOk Then
+         m_bCutOk = False
+         Return False
+      End If
+      ' Spessore grezzo
+      Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
+      ' Rimuovo eventuale vecchio pezzo per taglio diretto
+      EraseDirectCutPart()
+      ' Disattivo eventuali lavorazioni presenti
+      DeactivateAllMachinings()
+      ' Creo nuovo pezzo per il taglio diretto
+      Dim nPartId As Integer = CreateDirectCutPart()
+      Dim nLayerId As Integer = EgtCreateGroup(nPartId)
+      EgtSetName(nLayerId, NAME_OUTLOOP)
+      ' Creo il taglio parallelo alla lama
+      Dim ptStart As Point3d = m_ptTipP1
+      ptStart.z = 0
+      ' Funzione che crea i tagli successivi al primo
+      MultiplyCut(nLayerId)
+      ' Calcolo punto di inserimento nel grezzo
+      Dim ptMin, ptMax As Point3d
+      EgtGetBBoxGlob(nPartId, GDB_BB.STANDARD, ptMin, ptMax)
+      Dim ptIns As Point3d = ptMin + (m_ptTabOri - m_ptRawMin)
+      ptIns.z = dRawHeight
+      ' Inserisco il pezzo nel grezzo
+      EgtAddPartToRawPart(nPartId, ptIns, m_MainWindow.m_CurrentProjectPageUC.m_nRawId)
+      ' Inserisco la lavorazione
+      m_bCutOk = AddMachinings(nPartId) AndAlso UpdateAllMachiningsToolpaths()
+      EgtSetCurrPhase(1)
+      ' Eventuale eliminazione Home finale
+      If Not m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome Then
+         RemoveFinalHome()
+      End If
+      UpdateSimulOkBtn()
+      Return m_bCutOk
+   End Function
+
+   Private Function MultiplyCut(nLayerId As Integer) As Boolean
+      ' Recupero lo spessore del taglio della lama o del waterjet correntemente attiva
+      Dim nType As Integer = 0
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      Dim dThick As Double = 0
+      EgtTdbGetCurrToolParam(If(nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
+      EgtOutLog("Curr tool type in use for squaring: " & If(nType = MCH_TY.SAW_STD, "SAW_STD", "NOT 'SAW_STD'"))
+      ' Ricalcolo lo spessore in base all'inclinazione
+      dThick = dThick / Math.Cos(m_dAngV * Math.PI / 180)
+      ' Imposto angolo di rotazione a seconda del lato dei tagli paralleli
+      Dim dRotAngOX As Double = 90
+      ' Recupero dati da interfaccia
+      Dim dDimPzX As Double = m_dDimX
+      Dim nNumPzX As Integer = m_nNumX
+      Dim dDimPzY As Double = m_dDimY
+      Dim nNumPzY As Integer = m_nNumY
+      ' Definisco vettore di spostamento
+      Dim vtDelta As Vector3d
+      ' Calcolo primo taglio parallelo
+      Dim ptStart As Point3d = m_ptTipP1
+      ptStart.z = 0
+      If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
+         Dim dLenX As Double = dThick + (dDimPzX + dThick) * nNumPzX
+         Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
+         ' Inidico che è un taglio Diretto di tipo Squaring
+         EgtSetInfo(nCutParaId, INFO_DIRECTCUT, FlagDirectCuts.Squaring)
+         ' Imposto affondamento e angolo di fianco sul taglio (solo se non lama STD)
+         If Not nType = MCH_TY.SAW_STD Then
+            EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
+            EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
+            EgtOutLog("Curr tool in use is not of type SAW_STD: Depth is limited to raw thickness")
+         End If
+         ' Allungo la geometria
+         EgtExtendCurveStartByLen(nCutParaId, m_dOffsetSquaring + m_dExtraLength)
+         EgtExtendCurveEndByLen(nCutParaId, m_dOffsetSquaring + +m_dExtraLength)
+         ' Calcolo vettore di spostamento
+         vtDelta = Vector3d.FromPolar((dDimPzY + dThick), m_dAngO)
+         ' Ruoto il vettore di traslazione 
+         vtDelta.Rotate(Vector3d.Z_AX, dRotAngOX)
+         For Index As Integer = 1 To nNumPzY
+            Dim vtPerpMove As Vector3d = Index * vtDelta
+            ' Creo copie
+            Dim nCut2Id = EgtCopyGlob(nCutParaId, nLayerId)
+            EgtMove(nCut2Id, vtPerpMove, GDB_RT.GLOB)
+         Next
+         ' Calcolo primo taglio perpendicolare
+         Dim dLenY As Double = dThick + (dDimPzY + dThick) * nNumPzY
+         ' Arretro il punto di partenza di uno spessore lama
+         Dim vtDeltaPos As Vector3d = Vector3d.FromPolar(dThick + 0.1, m_dAngO - 90)
+         Dim nCutPerpId = EgtCreateLinePDL(nLayerId, ptStart + vtDeltaPos, m_dAngO + 90, dLenY + 0.2)
+         ' Imposto affondamento e angolo di fianco sul taglio
+         EgtSetInfo(nCutPerpId, INFO_DEPTH, m_dDepth)
+         EgtSetInfo(nCutPerpId, INFO_SIDE_ANGLE, m_dAngV)
+         ' Allungo la geometria
+         EgtExtendCurveStartByLen(nCutPerpId, m_dOffsetSquaring + m_dExtraLength)
+         EgtExtendCurveEndByLen(nCutPerpId, m_dOffsetSquaring + +m_dExtraLength)
+         ' Calcolo secondo vettore di spostamento
+         vtDelta = Vector3d.FromPolar((dDimPzX + dThick), m_dAngO)
+         For Index As Integer = 1 To nNumPzX
+            Dim vtPerpMove As Vector3d = vtDelta * Index
+            ' Creo copie
+            Dim nCut3Id = EgtCopyGlob(nCutPerpId, nLayerId)
+            EgtMove(nCut3Id, vtPerpMove, GDB_RT.GLOB)
+         Next
+      End If
+      Return True
+   End Function
+
+   Private Sub SetCoordVisibility(bShow As Boolean)
+      XcoordTxBl.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      XcoordTxBx.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      YcoordTxBl.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      YcoordTxBx.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+   End Sub
+
+   Private Sub ShowCoord()
+      Dim ptText As Point3d = m_ptPrev
+      ptText.ToLoc(New Frame3d(m_ptTabOri))
+      XcoordTxBx.Text = LenToString(ptText.x, 2)
+      YcoordTxBx.Text = LenToString(ptText.y, 2)
+   End Sub
+
+   Private Function SetMachineInCurrPos() As Boolean
+      ' Recupero la posizione macchina
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return False
+      ' Recupero il nome degli assi macchina
+      Dim sL1 As String = String.Empty
+      Dim sL2 As String = String.Empty
+      Dim sL3 As String = String.Empty
+      Dim sR1 As String = String.Empty
+      Dim sR2 As String = String.Empty
+      If Not m_MainWindow.m_CNCommunication.GetAxesNames(sL1, sL2, sL3, sR1, sR2) Then Return False
+      ' Visualizzo macchina in posizione
+      EgtSetAxisPos(sL1, dL1)
+      EgtSetAxisPos(sL2, dL2)
+      EgtSetAxisPos(sL3, dL3)
+      EgtSetAxisPos(sR1, dR1)
+      EgtSetAxisPos(sR2, dR2)
+      Return True
+   End Function
+
+End Class
+

DirectCuts/VacuumMachineButtonUC.xaml

@@ -1,13 +1,13 @@
 <UserControl x:Class="VacuumMachineButtonUC" 
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   DataContext="Self"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   xmlns:OmagCUT="clr-namespace:OmagCUT"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
-   mc:Ignorable="d" 
-   d:DesignHeight="597.3" d:DesignWidth="256">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             DataContext="Self"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:OmagCUT="clr-namespace:OmagCUT"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
 
    <Border Style="{DynamicResource OmagCut_Page2Border}">
 
@@ -15,28 +15,28 @@
          <ItemsControl.Resources>
             <DataTemplate DataType="{x:Type OmagCUT:TwoStateButton}">
                <ToggleButton IsChecked="{Binding IsChecked}"
-                             Style="{StaticResource OmagCut_GradientYellowIconToggleButton}">
-                  <Image Source="{Binding ImageSource}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                             Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+                  <Image Source="{Binding ImageSource}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
                </ToggleButton>
             </DataTemplate>
             <DataTemplate DataType="{x:Type OmagCUT:ThreeStateButton}">
                <Button Command="{Binding ExecuteCommand}"
                        Background="{Binding Background}"
-                       Style="{StaticResource OmagCut_MachineCommandsYellowGradientYellowIconButton}">
-                  <Image Source="{Binding ImageSource}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                       Style="{DynamicResource OmagCut_MachineCommandsYellowGradientYellowIconButton}">
+                  <Image Source="{Binding ImageSource}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
                </Button>
             </DataTemplate>
             <DataTemplate DataType="{x:Type OmagCUT:DoubleCommandButton}">
                <ToggleButton IsChecked="{Binding IsChecked}"
-                             Style="{StaticResource OmagCut_GradientYellowIconToggleButton}">
-                  <Image Source="{Binding ImageSource}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                             Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+                  <Image Source="{Binding ImageSource}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
                </ToggleButton>
             </DataTemplate>
             <DataTemplate DataType="{x:Type OmagCUT:PressedCommandButton}">
-               <Button Style="{StaticResource OmagCut_MachineCommandsYellowGradientYellowIconButton}"
+               <Button Style="{DynamicResource OmagCut_MachineCommandsYellowGradientYellowIconButton}"
                        PreviewMouseUp="PressedCommandButton_PreviewMouseUp"
                        PreviewMouseDown="PressedCommandButton_PreviewMouseDown">
-                  <Image Source="{Binding ImageSource}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                  <Image Source="{Binding ImageSource}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
                </Button>
             </DataTemplate>
          </ItemsControl.Resources>
@@ -54,7 +54,7 @@
             </ItemsPanelTemplate>
          </ItemsControl.ItemsPanel>
       </ItemsControl>
-      
+
    </Border>
 
 </UserControl>

DirectCuts/VacuumMachineButtonUC.xaml.vb

@@ -22,6 +22,9 @@ Public Class VacuumMachineButtonUC
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
 
+   ' visualizzo l'elenco degli elementi della pagina sono al primo avvio
+   Friend m_OutLogTypeButton As Boolean = True
+
    ' Creazione converter da String a ImageSource
    Dim ImageConverter As New ImageSourceConverter
 
@@ -71,10 +74,37 @@ Public Class VacuumMachineButtonUC
                If Not IsNothing(ButtonToAdd) Then m_ButtonList.Add(ButtonToAdd)
             End If
          End While
+
+         For Each MachineButton As MachineButton In m_ButtonList
+            OutLogTypeButton(MachineButton)
+         Next
+         m_OutLogTypeButton = False
+
          NotifyPropertyChanged("ButtonList")
       End If
    End Sub
 
+#Region "STATE CHANGED"
+   ' ------------------------------------------------------------------------------
+   ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
+   '-------------------------------------------------------------------------------
+
+   Friend Sub OutLogTypeButton(CurrMachineButton As MachineButton)
+      If Not m_OutLogTypeButton Then Return
+      Dim BtnType As Type = CurrMachineButton.GetType
+      If BtnType Is GetType(NoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(0) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(TwoStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(1) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(ThreeStateButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(2) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(DoubleCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(3) ") & " , " & CurrMachineButton.StateFlag)
+      ElseIf BtnType Is GetType(PressedCommandButton) Then
+         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(4) ") & " , " & CurrMachineButton.StateFlag)
+      End If
+   End Sub
+
    Friend Sub VacuumUpChanged(VacuumUpState As Boolean)
       Dim VacuumUpButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
@@ -371,6 +401,8 @@ Public Class VacuumMachineButtonUC
       Next
    End Sub
 
+#End Region    ' State Range
+
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
                          ByVal lpKeyName As String,

DirectCuts/VarMdiCommand.vb

@@ -0,0 +1,294 @@
+Imports EgtUILib.EgtInterface
+
+Module VarMdiCommand
+
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Public Sub ExecuteMDICommand(sLuaFileName As String)
+
+      ' Verifica esistenza pagina DirectCut e ne recupero CN corrente
+      If IsNothing( m_MainWindow.m_DirectCutPageUC) Then Return
+      Dim CurrCN As CN_generico = m_MainWindow.m_DirectCutPageUC.m_CN
+
+      ' Verifico esistenza nome script lua
+      If String.IsNullOrWhiteSpace(sLuaFileName) Then Return
+
+      ' Eseguo script
+      Dim CmdString As String = String.Empty
+      Dim b2Start As Boolean = False
+      Dim bEActive As Boolean = False
+      Dim sENumber As String = String.Empty
+      Dim sEValue As String = String.Empty
+      Dim sEType As String = 0
+      Dim sENumber2 As String = String.Empty
+      Dim sEValue2 As String = String.Empty
+      Dim sEType2 As String = 0
+      If Not ExecDirectCmdLua(sLuaFileName, CmdString, b2Start, bEActive, sENumber, sEValue, sEType, sENumber2, sEValue2, sEType2) Then
+         Return
+      End If
+
+      ' Se richiesta scrittura variabili
+      If bEActive Then
+         Select Case m_MainWindow.m_CNCommunication.m_nNCType
+            Case 1, 2             ' Num Axium e Flexium
+               ' se Flexium e abilitata scrittura variabili PLC
+               If m_MainWindow.m_CNCommunication.m_nNCType = 2 And CurrCN.m_NewVariable Then
+                  CurrCN.DPlcVariables_WriteVariables(sENumber, sEValue)
+                  If Not String.IsNullOrWhiteSpace(sENumber2) AndAlso Not String.IsNullOrWhiteSpace(sEValue2) Then
+                     CurrCN.DPlcVariables_WriteVariables(sENumber2, sEValue2)
+                  End If
+               ' altrimenti scrittura della variabile E
+               Else
+                  CurrCN.DVariables_WriteVariables2(sENumber, sEValue)
+               End If
+               Return
+            Case 3                ' Siemens
+               ' Scrivo prima variabile
+               Dim nEType As Integer = 0
+               StringToInt( sEType, nEType)
+               Select Case nEType
+                  Case 1
+                     Dim nEvalue As Integer = 0
+                     StringToInt( sEvalue, nEvalue)
+                     CurrCN.DVariables_WriteVariables3(sENumber, 1, nEValue, 0, 0, "")
+                     EgtOutLog("ENumber=" & sENumber & " EType=1 " & " EValue=" & nEValue.ToString())
+                  Case 2
+                     Dim lEvalue As Long = 0
+                     Long.TryParse(sEValue, lEvalue)
+                     CurrCN.DVariables_WriteVariables3(sENumber, 2, 0, lEvalue, 0, "")
+                     EgtOutLog("ENumber=" & sENumber & " EType=2 " & " EValue=" & lEvalue.ToString())
+                  Case 3
+                     Dim dEValue As Double = 0
+                     StringToDouble(sEValue, dEValue)
+                     CurrCN.DVariables_WriteVariables3(sENumber, 3, 0, 0, dEValue, "")
+                     EgtOutLog("ENumber=" & sENumber & " EType=3 " & " EValue=" & dEValue.ToString())
+                  Case 4
+                     CurrCN.DVariables_WriteVariables3(sENumber, 4, 0, 0, 0, sEValue)
+                     EgtOutLog("ENumber=" & sENumber & " EType=4 " & " EValue=" & sEValue)
+                  Case Else
+                     EgtOutLog("EType wrong : ENumber=" & sENumber & " EType=" & sEType & " EValue= " & sEValue)
+               End Select
+               If Not String.IsNullOrWhiteSpace(sEType2) AndAlso sEType2 <> "0" Then
+                  ' Pausa
+                  System.Threading.Thread.Sleep(100)
+                  ' Scrivo seconda variabile
+                  Dim nEType2 As Integer = 0
+                  StringToInt( sEType2, nEType2)
+                  Select Case nEType2
+                     Case 1
+                        Dim nEvalue2 As Integer = 0
+                        StringToInt( sEvalue2, nEvalue2)
+                        CurrCN.DVariables_WriteVariables3(sENumber2, 1, nEValue2, 0, 0, "")
+                        EgtOutLog("ENumber2=" & sENumber2 & " EType2=1" & " EValue2=" & nEValue2.ToString())
+                     Case 2
+                        Dim lEvalue2 As Long = 0
+                        Long.TryParse(sEValue2, lEvalue2)
+                        CurrCN.DVariables_WriteVariables3(sENumber2, 2, 0, lEValue2, 0, "")
+                        EgtOutLog("ENumber2=" & sENumber2 & " EType2=2" & " EValue2=" & lEValue2.ToString())
+                     Case 3
+                        Dim dEValue2 As Double = 0
+                        StringToDouble(sEValue2, dEValue2)
+                        CurrCN.DVariables_WriteVariables3(sENumber2, 3, 0, 0, dEValue2, "")
+                        EgtOutLog("ENumber2=" & sENumber2 & " EType2=3" & " EValue2=" & dEValue2.ToString())
+                     Case 4
+                        CurrCN.DVariables_WriteVariables3(sENumber2, 4, 0, 0, 0, sEValue2)
+                        EgtOutLog("ENumber2=" & sENumber2 & " EType2=4" & " EValue2=" & sEValue2)
+                     Case Else
+                        EgtOutLog("EType2 wrong : ENumber2=" & sENumber2 & " EType2=" & sEType2 & " EValue2=" & sEValue2)
+                  End Select
+               End If
+               Return
+            Case 4                ' Fanuc
+               ' eventuale scrittura di linea di comando MDI
+               If Not String.IsNullOrWhiteSpace(CmdString) Then
+                  ' attivo mpdalità MDI
+                  CurrCN.DGeneralFunctions_WriteCncMode(2)
+                  System.Threading.Thread.Sleep(100)
+                  ' salvo la stringa di comando ricevuta dal file lua
+                  CurrCN.sz_ManualDataInput = CmdString
+                  ' eseguo la funzione che ha il compito di scrivere il comando MDI
+                  CurrCN.MDI_command()
+               End If
+               ' attivo modalità Manuale
+               CurrCN.DGeneralFunctions_WriteCncMode(7)
+               System.Threading.Thread.Sleep(100)
+               ' eventuale caricamento prima variabile
+               If Not String.IsNullOrEmpty(sENumber) Then
+                  If String.IsNullOrWhiteSpace(sEValue) Then
+                     ' EActive: impulsivo "D#####"
+                     CurrCN.NC_pulse_bit(sENumber)
+                     EgtOutLog("Fanuc : DNumber=" & sENumber)
+                  Else
+                     ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                     If sENumber.Contains(".") Then
+                        ' D#####.#
+                        Dim bEValue As Boolean = ( sEValue.Trim <> "0")
+                        CurrCN.NC_write_var_bit(sENumber, bEValue)
+                     Else
+                        ' D#####
+                        CurrCN.NC_write_var_short(sENumber, CShort(sEValue))
+                     End If
+                     EgtOutLog("Fanuc : DNumber=" & sENumber & " DValue=" & sEValue)
+                  End If
+               Else
+                  EgtOutLog("Fanuc : DNumber=NullOrEmpty")
+               End If
+               ' eventale caricamento seconda variabile
+               If Not String.IsNullOrEmpty(sENumber2) Then
+                  If String.IsNullOrWhiteSpace(sEValue2) Then
+                     ' EActive: impulsivo "D#####"
+                     CurrCN.NC_pulse_bit(sENumber2)
+                     EgtOutLog("Fanuc : DNumber2=" & sENumber2)
+                  Else
+                     ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                     If sENumber2.Contains(".") Then
+                        ' D#####.#
+                        Dim bEValue2 As Boolean = ( sEValue2.Trim <> "0")
+                        CurrCN.NC_write_var_bit(sENumber2, bEValue2)
+                     Else
+                        ' D#####
+                        CurrCN.NC_write_var_short(sENumber2, CShort(sEValue2))
+                     End If
+                     EgtOutLog("Fanuc : DNumber2=" & sENumber2 & " DValue2=" & sEValue2)
+                  End If
+               Else
+                  EgtOutLog("Fanuc : DNumber2=NullOrEmpty")
+               End If
+               Return
+            Case Else             ' Demo
+               EgtOutLog("Demo : ENumber=" & sENumber & " EType=" & sEType & " EValue=" & sEValue)
+               EgtOutLog("Demo : ENumber2=" & sENumber2 & " EType2=" & sEType2 & " EValue2=" & sEValue2)
+               Return
+         End Select
+      End If
+
+      ' Esecuzione comando MDI
+      Dim nResult As Short
+      ' assegno la modalità di funzionamento
+      Select Case m_MainWindow.m_CNCommunication.m_nNCType
+         Case 1, 2, 4
+            nResult = CurrCN.DGeneralFunctions_WriteCncMode(2)     ' Modalità MDI per controlli num
+         Case 3
+            'Per Siemens non devo fare nulla
+      End Select
+      ' salvo la stringa di comando ricevuta dal file lua
+      CurrCN.sz_ManualDataInput = CmdString
+      ' esguo la funzione che ha il compito di scrivere il comando MDI
+      CurrCN.MDI_command()
+      ' avvio l'esecuzione del comando
+      Select Case m_MainWindow.m_CNCommunication.m_nNCType
+         Case 1, 2
+            System.Threading.Thread.Sleep(500)
+            CurrCN.DGeneralFunctions_CycleStart()
+         Case 3, 4
+            'Per Siemens e Fanuc non devo fare nulla
+      End Select
+      ' se richiesto ripeto l'operazione 
+      If b2Start Then
+         EgtOutLog("Avvio secondo cliclo start")
+         System.Threading.Thread.Sleep(800)
+         CurrCN.DGeneralFunctions_CycleStart()
+      End If
+      System.Threading.Thread.Sleep(300)
+      ' ripristino la modalità Manuale
+      nResult = CurrCN.DGeneralFunctions_WriteCncMode(7)
+   End Sub
+
+   ' Esecuzione dello script lua per impostazione dati del comando diretto
+   Private Function ExecDirectCmdLua(sLuaFileName As String,
+                                     ByRef CmdString As String, ByRef b2Start As Boolean, ByRef bEActive As Boolean,
+                                     ByRef sENumber As String, ByRef sEValue As String, ByRef sEType As String,
+                                     ByRef sENumber2 As String, ByRef sEValue2 As String, ByRef sEType2 As String) As Boolean
+      ' Esecuzione script
+      Dim sLuaPath As String = m_MainWindow.m_CurrentMachine.sMachDir & "\DirectCmd\" & sLuaFileName
+      Dim bOk As Boolean = EgtLuaExecFile(sLuaPath)
+      EgtOutLog("DirectCmd Script " & sLuaPath & If(bOk, " completed", " stopped with errors"))
+      If Not bOk Then Return False
+
+      ' Assegnazione valori a variabili lua
+      Dim ManualAxesMove As ManualAxesMoveUC = m_MainWindow.m_DirectCutPageUC.m_ManualAxesMove
+
+      Dim dFeed As Double = 0
+      If Not String.IsNullOrWhiteSpace(ManualAxesMove.FeedTxBx.Text) Then
+         StringToLen(ManualAxesMove.FeedTxBx.Text, dFeed)
+      Else
+         EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+         EgtTdbGetCurrToolParam(MCH_TP.FEED, dFeed)
+      End If
+      EgtLuaSetGlobNumVar("CMD.F", dFeed)
+
+      Dim dSpeed As Double = 0
+      If Not String.IsNullOrWhiteSpace(ManualAxesMove.SpeedTxBx.Text) Then
+         StringToDouble(ManualAxesMove.SpeedTxBx.Text, dSpeed)
+      Else
+         EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+         EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
+      End If
+      EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
+      EgtLuaSetGlobNumVar("CMD.L1", dL1)
+      EgtLuaSetGlobNumVar("CMD.L2", dL2)
+      EgtLuaSetGlobNumVar("CMD.L3", dL3)
+      EgtLuaSetGlobNumVar("CMD.R1", dR1)
+      EgtLuaSetGlobNumVar("CMD.R2", dR2)
+      EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
+
+      Dim sCurrTable As String = String.Empty
+      Dim nCurrTable As Integer = 1
+      EgtGetTableName(sCurrTable)
+      If sCurrTable <> "MainTab" Then nCurrTable = 2
+      EgtLuaSetGlobIntVar("CMD.TABLE", nCurrTable)
+
+      ' Esecuzione funzione
+      bOk = EgtLuaCallFunction("CmdString")
+      EgtOutLog(" CmdString function" & If(bOk, " completed", " stopped with errors"))
+      If Not bOk Then Return False
+
+      ' Leggo variabili da file Lua
+      CmdString = String.Empty
+      EgtLuaGetGlobStringVar("CMD.CMDSTRING", CmdString)
+      b2Start = False
+      EgtLuaGetGlobBoolVar("CMD.DOUBLESTART", b2Start)
+      bEActive = False
+      EgtLuaGetGlobBoolVar("CMD.EACTIVE", bEActive)
+      sENumber = String.Empty
+      EgtLuaGetGlobStringVar("CMD.ENUMBER", sENumber)
+      sEValue = String.Empty
+      EgtLuaGetGlobStringVar("CMD.EVALUE", sEValue)
+      sEType = String.Empty
+      EgtLuaGetGlobStringVar("CMD.ETYPE", sEType)
+      sENumber2 = String.Empty
+      EgtLuaGetGlobStringVar("CMD.ENUMBER2", sENumber2)
+      sEValue2 = String.Empty
+      EgtLuaGetGlobStringVar("CMD.EVALUE2", sEValue2)
+      sEType2 = String.Empty
+      EgtLuaGetGlobStringVar("CMD.ETYPE2", sEType2)
+      ' Reset variabili lua
+      EgtLuaResetGlobVar("CmdString")
+      EgtLuaResetGlobVar("CMD")
+      ' Log del comando
+      EgtOutLog("  CmdString=" & If(Not String.IsNullOrEmpty(CmdString), CmdString, "") &
+                " DOUBLESTART=" & b2Start.ToString() &
+                " EActive=" & bEActive.ToString() &
+                " ENumber=" & If(Not String.IsNullOrEmpty(sENumber), sENumber, "") &
+                " EValue=" & If(Not String.IsNullOrEmpty(sEValue), sEValue, "") &
+                " EType=" & If(Not String.IsNullOrEmpty(sEType), sEType, "") &
+                " ENumber2=" & If(Not String.IsNullOrEmpty(sENumber2), sENumber2, "") &
+                " EValue2=" & If(Not String.IsNullOrEmpty(sEValue2), sEValue2, "") &
+                " EType2=" & If(Not String.IsNullOrEmpty(sEType2), sEType2, ""))
+      Return True
+   End Function
+
+End Module

DrawImport/AlzFrontUC.xaml

@@ -1,209 +1,225 @@
 <UserControl x:Class="AlzFrontUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="768" d:DesignWidth="256">
-    <!-- Definizione della Grid Laterale -->
-    <Grid Name="VariablesCompoGrid"  Grid.RowSpan="2">
-        <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="0.3*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-        </Grid.ColumnDefinitions>
-        <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="0.2*"/>
-            <RowDefinition Height="4*"/>
-            <!--<RowDefinition Height="0.5*"/>
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="768" d:DesignWidth="256">
+
+   <!-- Definizione della Grid Laterale -->
+   <Grid Name="VariablesCompoGrid"  Grid.RowSpan="2">
+      <Grid.ColumnDefinitions>
+         <ColumnDefinition Width="1*"/>
+         <ColumnDefinition Width="0.3*"/>
+         <ColumnDefinition Width="1*"/>
+         <ColumnDefinition Width="1*"/>
+      </Grid.ColumnDefinitions>
+      <Grid.RowDefinitions>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="0.2*"/>
+         <RowDefinition Height="4*"/>
+         <!--<RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>-->
-        </Grid.RowDefinitions>
+      </Grid.RowDefinitions>
 
-        <!--Titolo della colonna della ALZATINE-->
-        <TextBlock Name="SideAngleBl" Grid.Row="0" Grid.Column="2" Text="Alz."
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+      <!--Titolo della colonna della ALZATINE-->
+      <TextBlock Name="SideAngleBl" Grid.Row="0" Grid.Column="2" Text="Alz."
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                 FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
 
-        <!--Titolo della colonna dei FRONTALINI-->
-        <TextBlock Name="HeelBl" Grid.Row="0" Grid.Column="3" Text="Front."
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+      <!--Titolo della colonna dei FRONTALINI-->
+      <TextBlock Name="HeelBl" Grid.Row="0" Grid.Column="3" Text="Front."
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                 FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
 
-        <TextBlock Name="Entity1" Grid.Row="1" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-        <CheckBox Name="A1" Grid.Column="2" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-10,0,0,0"/>
-        <CheckBox Name="F1" Grid.Column="3" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-10,0,0,0"/>
+      <TextBlock Name="Entity1" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <CheckBox Name="A1" Grid.Column="2" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-10,0,0,0"/>
+      <CheckBox Name="F1" Grid.Column="3" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-10,0,0,0"/>
 
-        <!--<EgtWPFLib:EgtTextBox Name="A1TxBx" Grid.Column="2" Grid.Row="1" Width="60"
+      <!--<EgtWPFLib:EgtTextBox Name="A1TxBx" Grid.Column="2" Grid.Row="1" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
         <EgtWPFLib:EgtTextBox Name="H1TxBx" Grid.Column="3" Grid.Row="1" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
 
-        <TextBlock Name="Entity2" Grid.Row="2" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-        <CheckBox Name="A2" Grid.Column="2" Grid.Row="2" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        <CheckBox Name="F2" Grid.Column="3" Grid.Row="2" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        
-        <!--<EgtWPFLib:EgtTextBox Name="A2TxBx" Grid.Column="2" Grid.Row="2" Width="60"
+      <TextBlock Name="Entity2" Grid.Row="2" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <CheckBox Name="A2" Grid.Column="2" Grid.Row="2" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+      <CheckBox Name="F2" Grid.Column="3" Grid.Row="2" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+
+      <!--<EgtWPFLib:EgtTextBox Name="A2TxBx" Grid.Column="2" Grid.Row="2" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
         <EgtWPFLib:EgtTextBox Name="H2TxBx" Grid.Column="3" Grid.Row="2" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
 
-        <TextBlock Name="Entity3" Grid.Row="3" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-        <CheckBox Name="A3" Grid.Column="2" Grid.Row="3" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        <CheckBox Name="F3" Grid.Column="3" Grid.Row="3" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        
-        <!--<EgtWPFLib:EgtTextBox Name="A3TxBx" Grid.Column="2" Grid.Row="3" Width="60"
+      <TextBlock Name="Entity3" Grid.Row="3" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <CheckBox Name="A3" Grid.Column="2" Grid.Row="3" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+      <CheckBox Name="F3" Grid.Column="3" Grid.Row="3" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+
+      <!--<EgtWPFLib:EgtTextBox Name="A3TxBx" Grid.Column="2" Grid.Row="3" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
         <EgtWPFLib:EgtTextBox Name="H3TxBx" Grid.Column="3" Grid.Row="3" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
 
-        <TextBlock Name="Entity4" Grid.Row="4" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-        <CheckBox Name="A4" Grid.Column="2" Grid.Row="4" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        <CheckBox Name="F4" Grid.Column="3" Grid.Row="4" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        
-        <!--<EgtWPFLib:EgtTextBox Name="A4TxBx" Grid.Column="2" Grid.Row="4" Width="60"
+      <TextBlock Name="Entity4" Grid.Row="4" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <CheckBox Name="A4" Grid.Column="2" Grid.Row="4" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+      <CheckBox Name="F4" Grid.Column="3" Grid.Row="4" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+
+      <!--<EgtWPFLib:EgtTextBox Name="A4TxBx" Grid.Column="2" Grid.Row="4" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
         <EgtWPFLib:EgtTextBox Name="H4TxBx" Grid.Column="3" Grid.Row="4" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
 
-        <TextBlock Name="Entity5" Grid.Row="5" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-        <CheckBox Name="A5" Grid.Column="2" Grid.Row="5" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        <CheckBox Name="F5" Grid.Column="3" Grid.Row="5" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        
-        <!--<EgtWPFLib:EgtTextBox Name="A5TxBx" Grid.Column="2" Grid.Row="5" Width="60"
+      <TextBlock Name="Entity5" Grid.Row="5" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <CheckBox Name="A5" Grid.Column="2" Grid.Row="5" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+      <CheckBox Name="F5" Grid.Column="3" Grid.Row="5" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+
+      <!--<EgtWPFLib:EgtTextBox Name="A5TxBx" Grid.Column="2" Grid.Row="5" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
         <EgtWPFLib:EgtTextBox Name="H5TxBx" Grid.Column="3" Grid.Row="5" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
 
-        <TextBlock Name="Entity6" Grid.Row="6" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-        <CheckBox Name="A6" Grid.Column="2" Grid.Row="6" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        <CheckBox Name="F6" Grid.Column="3" Grid.Row="6" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        
-        <!--<EgtWPFLib:EgtTextBox Name="A6TxBx" Grid.Column="2" Grid.Row="6" Width="60"
+      <TextBlock Name="Entity6" Grid.Row="6" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <CheckBox Name="A6" Grid.Column="2" Grid.Row="6" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+      <CheckBox Name="F6" Grid.Column="3" Grid.Row="6" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+
+      <!--<EgtWPFLib:EgtTextBox Name="A6TxBx" Grid.Column="2" Grid.Row="6" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
         <EgtWPFLib:EgtTextBox Name="H6TxBx" Grid.Column="3" Grid.Row="6" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
 
-        <TextBlock Name="Entity7" Grid.Row="7" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-        <CheckBox Name="A7" Grid.Column="2" Grid.Row="7" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        <CheckBox Name="F7" Grid.Column="3" Grid.Row="7" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        
-        
-        <!--<EgtWPFLib:EgtTextBox Name="A7TxBx" Grid.Column="2" Grid.Row="7" Width="60"
+      <TextBlock Name="Entity7" Grid.Row="7" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <CheckBox Name="A7" Grid.Column="2" Grid.Row="7" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+      <CheckBox Name="F7" Grid.Column="3" Grid.Row="7" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+
+
+      <!--<EgtWPFLib:EgtTextBox Name="A7TxBx" Grid.Column="2" Grid.Row="7" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
         <EgtWPFLib:EgtTextBox Name="H7TxBx" Grid.Column="3" Grid.Row="7" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
 
-        <TextBlock Name="Entity8" Grid.Row="8" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-        <CheckBox Name="A8" Grid.Column="2" Grid.Row="8" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        <CheckBox Name="F8" Grid.Column="3" Grid.Row="8" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        
-        <!--<EgtWPFLib:EgtTextBox Name="A8TxBx" Grid.Column="2" Grid.Row="8" Width="60"
+      <TextBlock Name="Entity8" Grid.Row="8" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <CheckBox Name="A8" Grid.Column="2" Grid.Row="8" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+      <CheckBox Name="F8" Grid.Column="3" Grid.Row="8" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+
+      <!--<EgtWPFLib:EgtTextBox Name="A8TxBx" Grid.Column="2" Grid.Row="8" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
         <EgtWPFLib:EgtTextBox Name="H8TxBx" Grid.Column="3" Grid.Row="8" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
 
-        <TextBlock Name="Entity9" Grid.Row="9" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-        <CheckBox Name="A9" Grid.Column="2" Grid.Row="9" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        <CheckBox Name="F9" Grid.Column="3" Grid.Row="9" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-        
-        <!--<EgtWPFLib:EgtTextBox Name="A9TxBx" Grid.Column="2" Grid.Row="9" Width="60"
+      <TextBlock Name="Entity9" Grid.Row="9" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <CheckBox Name="A9" Grid.Column="2" Grid.Row="9" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+      <CheckBox Name="F9" Grid.Column="3" Grid.Row="9" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+
+      <!--<EgtWPFLib:EgtTextBox Name="A9TxBx" Grid.Column="2" Grid.Row="9" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
         <EgtWPFLib:EgtTextBox Name="H9TxBx" Grid.Column="3" Grid.Row="9" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
 
-        <TextBlock Name="Entity10" Grid.Row="10" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
-        <CheckBox Name="A10" Grid.Column="2" Grid.Row="10" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
+      <TextBlock Name="Entity10" Grid.Row="10" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <CheckBox Name="A10" Grid.Column="2" Grid.Row="10" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+      <CheckBox Name="F10" Grid.Column="3" Grid.Row="10" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
 
-        <CheckBox Name="F10" Grid.Column="3" Grid.Row="10" Height="30" Width="40" HorizontalAlignment="Right"
-                  Margin="-20,0,0,0"/>
-
-        <!--<EgtWPFLib:EgtTextBox Name="A10TxBx" Grid.Column="2" Grid.Row="10" Width="60"
+      <!--<EgtWPFLib:EgtTextBox Name="A10TxBx" Grid.Column="2" Grid.Row="10" Width="60"
                             Margin="0,0,0,-2"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
         <EgtWPFLib:EgtTextBox Name="H10TxBx" Grid.Column="3" Grid.Row="10" Width="60"
                             Margin="0,0,0,-2"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
 
-        <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4">
-            <Grid.ColumnDefinitions>
-                <ColumnDefinition Width="1*"/>
-                <ColumnDefinition Width="0.3*"/>
-                <ColumnDefinition Width="1*"/>
-                <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-            <Grid.RowDefinitions>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <!--<RowDefinition Height="1*"/>-->
-            </Grid.RowDefinitions>
+      <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="0.3*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.55*"/>
+            <RowDefinition Height="0.55*"/>
+            <RowDefinition Height="0.55*"/>
+            <RowDefinition Height="1*"/>
+         </Grid.RowDefinitions>
 
-            <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
-                           Text="Offset"
-                           Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-                           FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            
-            <EgtWPFLib:EgtTextBox Name="Parameter1ATxBx"                                  
-                                  Grid.Column="2" Grid.Row="0"
-                                  HorizontalAlignment="Right"
-                                  Width="60" Height="30" Margin="0,0,0,0"
-                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter1FTxBx" 
-                                  Grid.Column="3" Grid.Row="0" 
-                                  HorizontalAlignment="Right"
-                                  Width="60" Height="30" Margin="0,0,0,0"
-                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            
+         <!-- Altezza delle alette -->
+         <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
+                    Text="Offset"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
 
-            <TextBlock Name="Parameter2TxBl" Grid.Row="1" Grid.ColumnSpan="2"
-                       Text="Offset2"
-                       Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-                       FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter2ATxBx" 
-                                  Grid.Column="2" Grid.Row="1"
-                                  HorizontalAlignment="Right"
-                                  Width="60" Height="30" Margin="0,0,0,0"
-                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter2FTxBx" 
-                                  Grid.Column="3" Grid.Row="1" 
-                                  HorizontalAlignment="Right"
-                                  Width="60" Height="30" Margin="0,0,0,0"
-                                  Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            
-            <!--Gestisco nello spazio di una TextBox due TextBoxs--><!--
+         <EgtWPFLib:EgtTextBox Name="Parameter1ATxBx"                                  
+                    Grid.Column="2" Grid.Row="0"
+                    HorizontalAlignment="Right"
+                    Width="60" Height="30" Margin="0,0,0,0"
+                    Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter1FTxBx" 
+                               Grid.Column="3" Grid.Row="0" 
+                               HorizontalAlignment="Right"
+                               Width="60" Height="30" Margin="0,0,0,0"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+         <!-- Delta angolo (abilitato solo per i frontalini) -->
+         <TextBlock Name="Parameter2TxBl" Grid.Row="1" Grid.ColumnSpan="2"
+                    Text="Offset2"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <!-- temporaneamente disabilito la definizione delta angolo per alzatine  -->
+         <EgtWPFLib:EgtTextBox Name="Parameter2ATxBx" 
+                               IsEnabled="False"
+                               Visibility="Collapsed"
+                               Grid.Column="2" Grid.Row="1"
+                               HorizontalAlignment="Right"
+                               Width="60" Height="30" Margin="0,0,0,0" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter2FTxBx" 
+                               Grid.Column="3" Grid.Row="1" 
+                               HorizontalAlignment="Right"
+                               Width="60" Height="30" Margin="0,0,0,0" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+         <!-- Spessore aletta -->
+         <TextBlock Name="Parameter5TxBl" Grid.Row="2" Grid.ColumnSpan="2"
+                    Text="Offset2"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
+                               Grid.Column="2" Grid.Row="2" 
+                               HorizontalAlignment="Right"
+                               Width="60" Height="30" Margin="0,0,0,0"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+         <!--Gestisco nello spazio di una TextBox due TextBoxs-->
+         <!--
             <UniformGrid Rows="1" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Width="90" >
                 <EgtWPFLib:EgtTextBox Name="Parameter2aTxBx" 
                                       Grid.Column="2" Grid.Row="12"
@@ -216,7 +232,7 @@
             </UniformGrid>-->
 
 
-            <!--<TextBlock Name="Parameter3TxBl" Grid.Row="2" Grid.ColumnSpan="2"
+         <!--<TextBlock Name="Parameter3TxBl" Grid.Row="2" Grid.ColumnSpan="2"
                Text="Affondamento"
                Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
@@ -226,7 +242,7 @@
                                   Width="85" Height="30"
                                   Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
 
-            <!--<TextBlock Name="Parameter4TxBl" Grid.Row="3" Grid.ColumnSpan="2"
+         <!--<TextBlock Name="Parameter4TxBl" Grid.Row="3" Grid.ColumnSpan="2"
                            Text="Accorciamento"
                            Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                            FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
@@ -235,22 +251,22 @@
                                   Margin="0,0,0,-2"
                                   Width="85" Height="30"
                                   Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
-            
-            <UniformGrid Columns="2" Grid.ColumnSpan="4" Grid.Row="2">
-                <!--questo bottone è stato creato solo per garantire il corretto allinaemento-->
-                <Button Name="Vuoto" Visibility="Hidden"/>
-                <!--Bottone per tornare indietro alla selezione di CompoInterni e Alz&Front-->
-                <Button Name="BackBtn" 
+
+         <UniformGrid Columns="2" Grid.ColumnSpan="4" Grid.Row="3">
+            <!--questo bottone è stato creato solo per garantire il corretto allinaemento-->
+            <Button Name="Vuoto" Visibility="Hidden"/>
+            <!--Bottone per tornare indietro alla selezione di CompoInterni e Alz&Front-->
+            <Button Name="BackBtn" 
                     Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-            </UniformGrid>
-           
-        </Grid>
+               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </UniformGrid>
+
+      </Grid>
 
 
 
-    </Grid>
+   </Grid>
 
 </UserControl>
 

DrawImport/AlzFrontUC.xaml.vb

@@ -1,6 +1,4 @@
-Imports System.Globalization
-Imports EgtUILib
-Imports EgtWPFLib
+Imports EgtUILib
 
 Public Class AlzFrontUC
    Private Const NUM_VAR As Integer = 10
@@ -20,6 +18,7 @@ Public Class AlzFrontUC
 
    ' nome della info riferita alle alzatine e ai frontalini (1=Alz, 2=Front, 0=niente)
    Private Const INFO_ALZFRONT As String = "AF"
+   Private Const INFO_ENABLE As String = "EnableAF"
 
    ' Properties 
    Private m_sCompoDir As String = String.Empty
@@ -75,8 +74,9 @@ Public Class AlzFrontUC
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
 
       ' nome dei parametri condivisi
-      Parameter1TxBl.Text = "Altezza"
-      Parameter2TxBl.Text = "Delta angolo"
+      Parameter1TxBl.Text = EgtMsg(91134)    ' Altezza
+      Parameter2TxBl.Text = EgtMsg(91135)    ' Delta angolo
+      Parameter5TxBl.Text = EgtMsg(91136)    ' Spessore
 
       EgtZoom(ZM.ALL)
    End Sub
@@ -94,10 +94,17 @@ Public Class AlzFrontUC
       Dim LabelId As Integer = GDB_ID.NULL
 
       ' definisco i valori delle altezza e degli angoli di spoglia per le alzatine e i frontalini (letti da file ini del programma)
-      GetPrivateProfileString(S_ALZFRONT, K_ALZ_HEIGHT, "0", Parameter1ATxBx.Text, m_MainWindow.GetIniFile)
-      GetPrivateProfileString(S_ALZFRONT, K_FRONT_HEIGHT, "0", Parameter1FTxBx.Text, m_MainWindow.GetIniFile)
+      Dim sVal As String = String.Empty
+      Dim dVal As Double = 0
+      GetPrivateProfileString(S_ALZFRONT, K_ALZ_HEIGHT, "0", sVal, m_MainWindow.GetIniFile)
+      Utility.StringToDouble(sVal, dVal)
+      Parameter1ATxBx.Text = Utility.LenToString(dVal, 4)
+      GetPrivateProfileString(S_ALZFRONT, K_FRONT_HEIGHT, "0", sVal, m_MainWindow.GetIniFile)
+      Utility.StringToDouble(sVal, dVal)
+      Parameter1FTxBx.Text = Utility.LenToString(dVal, 4)
       GetPrivateProfileString(S_ALZFRONT, K_ALZ_DELTA_ANG, "0", Parameter2ATxBx.Text, m_MainWindow.GetIniFile)
       GetPrivateProfileString(S_ALZFRONT, K_FRONT_DELTA_ANG, "0", Parameter2FTxBx.Text, m_MainWindow.GetIniFile)
+      Parameter5TxBx.Text = Utility.LenToString(m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight, 2)
 
       ' Imposto contesto corrente
       EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
@@ -138,31 +145,41 @@ Public Class AlzFrontUC
 
       ' inserisco il lato nella lista 
       While CurrLine <> GDB_ID.NULL
-         ' escludo tutte le forme che non sono delle linee
-         If EgtGetType(CurrLine) = GDB_TY.CRV_LINE Then
-            ' Aggiungo il lato alla lista di quelli su cui è possibile mettere una alzatina o un frontalino
-            Dim sNameCurrLine As String = String.Empty
-            Dim nInfo As Integer = 0
-            Dim dSideAng As Integer = 0
-            EgtSetName(CurrLine, "A" & nEntityIndex.ToString)
-            EgtGetName(CurrLine, sNameCurrLine)
-            ' inserisco la numerazione dei lati della figura
-            AddTextToLine(sNameCurrLine, LabelId, CurrLine, 20, m_dBBoxRad, True)
-            ' recupero l'informazione 
-            EgtGetInfo(CurrLine, INFO_ALZFRONT, nInfo)
-            If nInfo = 1 Then
-               AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.ALZATINA))
-            ElseIf nInfo = 2 Then
-               AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.FRONTALINO))
-            Else
-               AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine))
-            End If
-            nEntityIndex += 1
-         Else
-            EgtSetName(CurrLine, "B" & nOtherIndex.ToString)
-            nOtherIndex = nOtherIndex + 1
-         End If
+         Dim NextId As Integer = EgtGetNext(CurrLine)
+         If NextId = GDB_ID.NULL Then NextId = EgtGetFirstInGroup(LoopId)
+         If VerifySideAnglePossible(PrevLine, CurrLine, NextId, bOutLoop) Then
 
+            If ApprovedSideToAlzFront(CurrLine) Then
+               ' Aggiungo il lato alla lista di quelli su cui è possibile mettere una alzatina o un frontalino
+               Dim sNameCurrLine As String = String.Empty
+               Dim nInfo As Integer = 0
+               Dim dSideAng As Integer = 0
+               EgtSetName(CurrLine, "A" & nEntityIndex.ToString)
+               EgtGetName(CurrLine, sNameCurrLine)
+               ' inserisco la numerazione dei lati della figura
+               AddTextToLine(sNameCurrLine, LabelId, CurrLine, 20, m_dBBoxRad, True)
+               ' recupero l'informazione 
+               EgtGetInfo(CurrLine, INFO_ALZFRONT, nInfo)
+               If nInfo = 1 Then
+                  AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.ALZATINA))
+               ElseIf nInfo = 2 Then
+                  AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine, AlzFrontEntity.AlzFront.FRONTALINO))
+               Else
+                  AlzFrontEntityList.Add(New AlzFrontEntity(sNameCurrLine, CurrLine))
+               End If
+               ' inserisco riferimento univoco al lato (solo se non esiste)
+               Dim sInfoRef As String = String.Empty
+               EgtGetInfo(CurrLine, "RefAF", sInfoRef)
+               If String.IsNullOrEmpty(sInfoRef) Then
+                  Dim sRefGUID As String = System.Guid.NewGuid().ToString()
+                  EgtSetInfo(CurrLine, "RefAF", sRefGUID)
+               End If
+               nEntityIndex += 1
+            Else
+               EgtSetName(CurrLine, "B" & nOtherIndex.ToString)
+               nOtherIndex = nOtherIndex + 1
+            End If
+         End If
          PrevLine = CurrLine
          CurrLine = EgtGetNext(CurrLine)
       End While
@@ -176,10 +193,10 @@ Public Class AlzFrontUC
       If LoopId <> GDB_ID.NULL Then
          If m_nCount = 0 Then
             If m_CallingPage = MainWindow.Pages.Draw Then
-               m_MainWindow.m_DrawPageUC.MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 7)   ' Non ci sono lati modificabili
+               m_MainWindow.m_DrawPageUC.MessageTxBx.Text = EgtMsg(90387)   ' Non ci sono lati modificabili
                m_MainWindow.m_DrawPageUC.MessageBrd.Background = Application.Current.FindResource("OmagCut_Yellow")
             Else
-               m_MainWindow.m_ImportPageUC.MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 7)   ' Non ci sono lati modificabili
+               m_MainWindow.m_ImportPageUC.MessageTxBx.Text = EgtMsg(90387)   ' Non ci sono lati modificabili
                m_MainWindow.m_ImportPageUC.MessageBrd.Background = Application.Current.FindResource("OmagCut_Yellow")
             End If
          Else
@@ -266,6 +283,26 @@ Public Class AlzFrontUC
       bInternalSelection = False
    End Sub
 
+   ' restituisce vero se il lato possiede delle info legate al sideangle
+   Private Function VerifyIsThereSideAngle(nCurrLine As Integer) As Boolean
+      Dim dSideAngle As Double
+      return EgtGetInfo(nCurrLine, INFO_SIDE_ANGLE, dSideAngle)
+   End Function
+
+   ' restituisce vero se il lato possiede delle info legate alle alette
+   Private Function VerifyIsThereAlzFront(nCurrLine As Integer) As Boolean
+      Dim nAlzFront As Integer
+      return EgtGetInfo(nCurrLine, INFO_ALZFRONT, nAlzFront) AndAlso nAlzFront <> 0
+   End Function
+
+   ' approvo la costruzione dell'aletta sul lato indicato
+   Private Function ApprovedSideToAlzFront(nCurrLine As Integer) As Boolean
+      If VerifyIsThereSideAngle(nCurrLine) And Not VerifyIsThereAlzFront(nCurrLine) Then
+         ' se esiste SideAngle e un'aletta allora NON approvo
+         Return False
+      End If
+      Return True
+   End Function
 
    ' Permette di aggiugere accanto alla linea passata
    Friend Function AddTextToLine(sText As String, TextLayer As Integer, CurrLine As Integer, dDistance As Double,
@@ -574,9 +611,9 @@ Public Class AlzFrontUC
    Private Sub ParameterA1TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter1ATxBx.EgtClosed
       ' Nuovo angolo di inclinazione
       Dim dValue As Double
-      StringToDouble(Parameter1ATxBx.Text, dValue)
+      StringToLen(Parameter1ATxBx.Text, dValue)
       ' salvo il valore nel file ini e inserisco il valore nel file lua
-      WritePrivateProfileString("Alz&Front", "A_Height", Parameter1ATxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString("Alz&Front", "A_Height", DoubleToString(dValue, 3), m_MainWindow.GetIniFile())
       ' aggiorno il disegno
       LoadCurrentCompo()
    End Sub
@@ -585,9 +622,9 @@ Public Class AlzFrontUC
    Private Sub Parameter1FTxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter1FTxBx.EgtClosed
       ' Nuovo angolo di inclinazione
       Dim dValue As Double
-      StringToDouble(Parameter1FTxBx.Text, dValue)
+      StringToLen(Parameter1FTxBx.Text, dValue)
       ' salvo il valore nel file ini e inserisco il valore nel file lua
-      WritePrivateProfileString("Alz&Front", "F_Height", Parameter1FTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString("Alz&Front", "F_Height", DoubleToString(dValue, 3), m_MainWindow.GetIniFile())
       ' aggiorno il disegno
       LoadCurrentCompo()
    End Sub
@@ -614,6 +651,13 @@ Public Class AlzFrontUC
       LoadCurrentCompo()
    End Sub
 
+   Private Sub Parameter5TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter5TxBx.EgtClosed
+      Dim dValue As Double
+      StringToDouble(Parameter5TxBx.Text, dValue)
+      ' aggiorno il disegno
+      LoadCurrentCompo()
+   End Sub
+
 #End Region    ' Altezza, delta angolo di spoglia
 
 #Region "METHODS"
@@ -749,6 +793,9 @@ Public Class AlzFrontUC
       If StringToLen(Parameter2FTxBx.Text, dVal) Then
          EgtLuaSetGlobNumVar("CMP.F_DeltaAng", dVal)
       End If
+      If StringToLen(Parameter5TxBx.Text, dVal) Then
+         EgtLuaSetGlobNumVar("CMP.ThicknessRaw", dVal)
+      End If
       ' parametri per la scrittura dei caratteri
       EgtLuaSetGlobNumVar("CMP.BBoxRad", m_dBBoxRad)
       EgtLuaSetGlobNumVar("CMP.HeightText", m_dH)

DrawImport/CompoCsvData.xaml

@@ -1,13 +1,13 @@
 <Window x:Class="CompoCsvData"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   FontFamily="{DynamicResource OmagCut_Font}"
-   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
-   Title="ChooseMachining" Height="276.5" Width="426.5">
-   
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+        Title="CompoCsvData" Height="276.5" Width="426.5">
+
    <!--Definizione della pagina di impostazione dati Trf su componenti-->
-    <Border Style="{DynamicResource OmagCut_Border}">
+   <Border Style="{DynamicResource OmagCut_Border}">
 
       <Grid Name="CompoCsvDataGrid">
          <Grid.ColumnDefinitions>
@@ -27,19 +27,19 @@
          </Grid.RowDefinitions>
 
          <TextBlock Name="OrderTxBl" Grid.Column="1" Grid.Row="1"
-            Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
          <EgtWPFLib:EgtTextBox Name="OrderTxBx" Grid.Column="2" Grid.Row="1"
-            Style="{StaticResource OmagCut_KeyboardTextBox}"/>
+                               Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
 
          <TextBlock Name="ListTxBl" Grid.Column="1" Grid.Row="2"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
          <EgtWPFLib:EgtTextBox Name="ListTxBx" Grid.Column="2" Grid.Row="2"
-            Style="{StaticResource OmagCut_KeyboardTextBox}"/>
+                               Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
 
          <TextBlock Name="NameTxBl" Grid.Column="1" Grid.Row="3"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
          <EgtWPFLib:EgtTextBox Name="NameTxBx" Grid.Column="2" Grid.Row="3"
-            Style="{StaticResource OmagCut_KeyboardTextBox}"/>
+                               Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
 
          <Grid Name="ButtonsGrid" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="4">
             <Grid.ColumnDefinitions>
@@ -50,13 +50,15 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}"
-               IsCancel="True">
-               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            <Button Name="OkBtn" Grid.Column="1" 
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}"
+                    IsCancel="True">
+               <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
-            <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}"
-               IsCancel="True">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            <Button Name="ExitBtn" Grid.Column="3" 
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}"
+                    IsCancel="True">
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
 
          </Grid>

DrawImport/CompoCsvData.xaml.vb

@@ -1,5 +1,4 @@
-Imports System.Collections.ObjectModel
-Imports EgtUILib
+Imports EgtUILib
 
 Public Class CompoCsvData
 

DrawImport/CompoDimensionUC.xaml

@@ -1,11 +1,11 @@
 <UserControl x:Class="CompoDimensionUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="597.1" d:DesignWidth="255.9">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.1" d:DesignWidth="255.9">
 
    <!-- Definizione della Grid Laterale -->
    <Grid Name="VariablesCompoGrid"  Grid.RowSpan="2">
@@ -26,54 +26,54 @@
          <RowDefinition Height="0.5*"/>
          <RowDefinition Height="1*"/>
          <RowDefinition Height="1*"/>
-        </Grid.RowDefinitions>
+      </Grid.RowDefinitions>
 
       <TextBlock Name="Label1" Grid.Row="0"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox1" Grid.Column="1" Grid.Row="0" Width="90"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label2" Grid.Row="1"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox2" Grid.Column="1" Grid.Row="1" Width="90"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label3" Grid.Row="2"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox3" Grid.Column="1" Grid.Row="2" Width="90"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label4" Grid.Row="3"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox4" Grid.Column="1" Grid.Row="3" Width="90"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label5" Grid.Row="4"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox5" Grid.Column="1" Grid.Row="4" Width="90"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label6" Grid.Row="5"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox6" Grid.Column="1" Grid.Row="5" Width="90"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label7" Grid.Row="6"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox7" Grid.Column="1" Grid.Row="6" Width="90"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label8" Grid.Row="7"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox8" Grid.Column="1" Grid.Row="7" Width="90"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label9" Grid.Row="8"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox9" Grid.Column="1" Grid.Row="8" Width="90"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Label10" Grid.Row="9"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <EgtWPFLib:EgtTextBox Name="TextBox10" Grid.Column="1" Grid.Row="9" Width="90"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-       <!--Per confermare l'inserimento CompoInterno-->
+      <!--Per confermare l'inserimento CompoInterno-->
       <Button Name="AddBtn" Grid.Row="10" Style="{DynamicResource OmagCut_YellowTextButton}"/>
       <Button Name="CancelBtn" Grid.Column="1" Grid.Row="10" Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-       <!--Selezione delle componenti interne-->
+      <!--Selezione delle componenti interne-->
       <Button Name="InternComponentBtn" Grid.Row="10" Grid.ColumnSpan="2"
               Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
@@ -81,6 +81,6 @@
       <Button Name="AlzFrontBtn" Grid.Row="11" Grid.ColumnSpan="2"
               Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-    </Grid>
+   </Grid>
 
 </UserControl>

DrawImport/CompoDimensionUC.xaml.vb

@@ -34,16 +34,16 @@ Public Class CompoDimensionUC
       Dim sCompoDir As String = String.Empty
       GetPrivateProfileString(S_ALZFRONT, K_COMPODIR, "", sCompoDir, m_MainWindow.GetIniFile())
       ' definisco il nome dei comandi presenti nella pagine
-      InternComponentBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 47)     ' Componenti interni
+      InternComponentBtn.Content = EgtMsg(90447)     ' Componenti interni
       If Not String.IsNullOrEmpty(sCompoDir) Then
          bEnableAlzFront = True
-         AlzFrontBtn.Content = "Alzatine & Frontalini"
+         AlzFrontBtn.Content = EgtMsg(91137)
       Else
          AlzFrontBtn.Visibility = Visibility.Collapsed
       End If
 
-      AddBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 48)                 ' Aggiungi
-      CancelBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 49)              ' Rimuovi
+      AddBtn.Content = EgtMsg(90448)                 ' Aggiungi
+      CancelBtn.Content = EgtMsg(90449)              ' Rimuovi
    End Sub
 
    Private Sub CompoDimensionUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -75,6 +75,7 @@ Public Class CompoDimensionUC
          m_DrawPage.sCompoName.StartsWith("PBagno") Then
          ShowInternalBtn(True)
          ShowAlzFrontBtn(bEnableAlzFront)
+         m_DrawPage.MessageGrid.Visibility = Visibility.Hidden
       Else
          ShowInternalBtn(False)
          ShowAlzFrontBtn(False)
@@ -106,8 +107,10 @@ Public Class CompoDimensionUC
    Friend Sub ShowAlzFrontBtn(ByVal value As Boolean)
       If value Then
          AlzFrontBtn.Visibility = Visibility.Visible
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Hidden
       Else
          AlzFrontBtn.Visibility = Visibility.Hidden
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Visible
       End If
    End Sub
 
@@ -336,6 +339,7 @@ Public Class CompoDimensionUC
             Dim nCmpInfo As Integer = 0
             If EgtGetInfo(nId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
                EgtSetStatus(nId, GDB_ST.OFF)
+               UpdateInLoopReference(nCmp)
                Exit While
             End If
             nId = EgtGetNextName(nId, "HoleLabels")
@@ -379,5 +383,42 @@ Public Class CompoDimensionUC
       EgtDraw()
    End Sub
 
+   Private Sub UpdateInLoopReference(nCmp As Integer)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               Dim LocalList As New List(Of Integer) From {nIdInLoop}
+               m_DrawPage.m_FiloTopUC.CreateFiloTopPreView(LocalList)
+               EgtSetStatus(nLayFiloTop, GDB_ST.ON_)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
+   ' riceve la info "ID" della componente
+   Public Sub SetStatusVisibilityInLoopReference(nCmp As Integer, Status As GDB_ST)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               EgtSetStatus(nLayFiloTop, Status)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
 #End Region    ' METHODS for InternalCompo
 End Class

DrawImport/CompoTrfData.xaml

@@ -1,13 +1,13 @@
 <Window x:Class="CompoTrfData"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   FontFamily="{DynamicResource OmagCut_Font}"
-   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
-   Title="ChooseMachining" Height="426.5" Width="426.5">
-   
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+        Title="CompoTrfData" Height="426.5" Width="426.5">
+
    <!--Definizione della pagina di impostazione dati Trf su componenti-->
-    <Border Style="{DynamicResource OmagCut_Border}">
+   <Border Style="{DynamicResource OmagCut_Border}">
 
       <Grid Name="CompoTrfDataGrid">
          <Grid.ColumnDefinitions>
@@ -30,34 +30,34 @@
          </Grid.RowDefinitions>
 
          <TextBlock Name="OrdCodeTxBl" Grid.Column="1" Grid.Row="1"
-            Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
          <EgtWPFLib:EgtTextBox Name="OrdCodeTxBx" Grid.Column="2" Grid.Row="1"
-            Style="{StaticResource OmagCut_KeyboardTextBox}"/>
+                               Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
 
          <TextBlock Name="OrdDescTxBl" Grid.Column="1" Grid.Row="2"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
          <EgtWPFLib:EgtTextBox Name="OrdDescTxBx" Grid.Column="2" Grid.Row="2"
-            Style="{StaticResource OmagCut_KeyboardTextBox}"/>
+                               Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
 
          <TextBlock Name="PartCodeTxBl" Grid.Column="1" Grid.Row="3"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
          <EgtWPFLib:EgtTextBox Name="PartCodeTxBx" Grid.Column="2" Grid.Row="3"
-            Style="{StaticResource OmagCut_KeyboardTextBox}"/>
+                               Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
 
          <TextBlock Name="MatCodeTxBl" Grid.Column="1" Grid.Row="4"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
          <EgtWPFLib:EgtTextBox Name="MatCodeTxBx" Grid.Column="2" Grid.Row="4"
-            Style="{StaticResource OmagCut_KeyboardTextBox}"/>
+                               Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
 
          <TextBlock Name="SurfCodeTxBl" Grid.Column="1" Grid.Row="5"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
          <EgtWPFLib:EgtTextBox Name="SurfCodeTxBx" Grid.Column="2" Grid.Row="5"
-            Style="{StaticResource OmagCut_KeyboardTextBox}"/>
+                               Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
 
          <TextBlock Name="ThicknessTxBl" Grid.Column="1" Grid.Row="6"
-            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left"/>
          <EgtWPFLib:EgtTextBox Name="ThicknessTxBx" Grid.Column="2" Grid.Row="6"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
          <Grid Name="ButtonsGrid" Grid.Column="0" Grid.Row="8" Grid.ColumnSpan="4">
             <Grid.ColumnDefinitions>
@@ -68,13 +68,15 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}"
-               IsCancel="True">
-               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            <Button Name="OkBtn" Grid.Column="1" 
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}"
+                    IsCancel="True">
+               <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
-            <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}"
-               IsCancel="True">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            <Button Name="ExitBtn" Grid.Column="3" 
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}"
+                    IsCancel="True">
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
 
          </Grid>

DrawImport/CompoTrfData.xaml.vb

@@ -1,5 +1,4 @@
-Imports System.Collections.ObjectModel
-Imports EgtUILib
+Imports EgtUILib
 
 Public Class CompoTrfData
 
@@ -14,16 +13,17 @@ Public Class CompoTrfData
    Private Sub CompoTrfData_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
-      OrdCodeTxBl.Text = EgtMsg(MSG_DRAWPAGEUC + 10)    'Order Code
-      OrdDescTxBl.Text = EgtMsg(MSG_DRAWPAGEUC + 11)    'Order Description
-      PartCodeTxBl.Text = EgtMsg(MSG_DRAWPAGEUC + 16)   'Part Code
-      MatCodeTxBl.Text = EgtMsg(MSG_DRAWPAGEUC + 12)    'Material Code
-      SurfCodeTxBl.Text = EgtMsg(MSG_DRAWPAGEUC + 13)   'Surface Code
-      ThicknessTxBl.Text = EgtMsg(MSG_DRAWPAGEUC + 14)  'Thickness
+      OrdCodeTxBl.Text = EgtMsg(90390)    ' Order Code
+      OrdDescTxBl.Text = EgtMsg(90391)    ' Order Description
+      PartCodeTxBl.Text = EgtMsg(90396)   ' Part Code
+      MatCodeTxBl.Text = EgtMsg(90392)    ' Material Code
+      SurfCodeTxBl.Text = EgtMsg(90393)   ' Surface Code
+      ThicknessTxBl.Text = EgtMsg(90394)  ' Thickness
    End Sub
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       DialogResult = True
+      SaveData()
       Close()
    End Sub
 
@@ -32,7 +32,30 @@ Public Class CompoTrfData
       Close()
    End Sub
 
+   Private Sub SaveData()
+      WritePrivateProfileString(S_TRF, K_ORDCODE, OrdCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_ORDDESC, OrdDescTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_PARTCODE, PartCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_MATCODE, MatCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_SURFCODE, SurfCodeTxBx.Text, m_MainWindow.GetIniFile())
+      ' prima di salvare lo spessore converto in mm e poi di nuovo in stringa
+      Dim dVal As Double = 0
+      StringToLen(ThicknessTxBx.Text, dVal)
+      WritePrivateProfileString(S_TRF, K_TRFTHICKNESS, DoubleToString(dVal, 4), m_MainWindow.GetIniFile())
+   End Sub
+
    Friend Sub SetData(sOrdCode As String, sOrdDesc As String, sPartCode As String, sMatCode As String, sSurfCode As String, dTh As Double)
+      ' se verifico che non sono stati iniziliazzti i campi allora provvedo a leggere il file ini del programma
+      If sOrdCode = "" And sOrdDesc = "" And sPartCode = "" And sMatCode = "" And sSurfCode = "" Then
+         GetPrivateProfileString(S_TRF, K_ORDCODE, sOrdCode, sOrdCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_ORDDESC, sOrdDesc, sOrdDesc, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_PARTCODE, sPartCode, sPartCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_MATCODE, sMatCode, sMatCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_SURFCODE, sSurfCode, sSurfCode, m_MainWindow.GetIniFile())
+         ' recupero il dato dello spessore che deve essere in mm
+         dTh = GetPrivateProfileDouble(S_TRF, K_TRFTHICKNESS, dTh, m_MainWindow.GetIniFile())
+      End If
+      ' inizializzo i campi della finestra
       OrdCodeTxBx.Text = sOrdCode
       OrdDescTxBx.Text = sOrdDesc
       PartCodeTxBx.Text = sPartCode

DrawImport/DrawPageUC.xaml

@@ -1,18 +1,18 @@
 <UserControl x:Class="DrawPageUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="DrawPage_Initialized" Loaded="DrawPage_Loaded" Unloaded="DrawPage_Unloaded">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="DrawPage_Initialized" Loaded="DrawPage_Loaded" Unloaded="DrawPage_Unloaded">
 
    <!-- Definizione della DrawPage -->
    <Border >
       <Grid Name="DrawPageGrd" >
          <Grid.ColumnDefinitions>
-             <ColumnDefinition Width="3*"/>
-             <ColumnDefinition Width="12*"/>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
          </Grid.ColumnDefinitions>
          <Grid.RowDefinitions>
             <RowDefinition Height="1*"/>
@@ -32,13 +32,13 @@
             </Grid.ColumnDefinitions>
 
             <ToggleButton Name="SideAngleBtn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                          Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
             <ToggleButton Name="FiloTopBtn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                          Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
             <ToggleButton Name="EngraveBtn" Grid.Column="2"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                          Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
             <ToggleButton Name="DripCutBtn" Grid.Column="3" Padding="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                          Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
 
          </Grid>
 
@@ -64,22 +64,22 @@
                <ToggleButton Name="DimensionBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowToggleButton}" Visibility="Collapsed"/>
             </Grid>
 
-            <Grid Name="VariablesGrd" Grid.Row="1" Grid.ColumnSpan="2"/>
-            
+            <Grid Name="VariablesGrd" Grid.Row="1" Grid.RowSpan="2" Grid.ColumnSpan="2"/>
+
             <Grid Name="MessageGrid" Grid.Row="2" Grid.ColumnSpan="2">
-               <TextBlock Name="MessageTxBl" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+               <TextBlock Name="MessageTxBl" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
             </Grid>
 
             <Button Name="BackBtn" Grid.Column="1" Grid.Row="14"
-               Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
-            
+
          </Grid>
 
          <Border Name="MessageBrd" Grid.Row="4" BorderThickness="0,1,0,0" BorderBrush="Gray">
             <TextBlock Name="MessageTxBx" TextAlignment="Center"
-                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Border>
 
          <!-- Definizione della Grid Inferiore per i Button V e X -->
@@ -95,9 +95,10 @@
             <Grid Name="TopGrd">
 
                <TextBlock Name="TopTxBl"
-                  Style="{StaticResource OmagCut_ToolsDBTextBlock}" />
-               <CheckBox Name="TopChBx" Style="{StaticResource OmagCut_CheckBox}"
-                  HorizontalAlignment="Right" Margin="6,0,6,0"/>
+                          Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />
+               <CheckBox Name="TopChBx" 
+                         Style="{DynamicResource OmagCut_CheckBox}"
+                         HorizontalAlignment="Right" Margin="6,0,6,0"/>
 
             </Grid>
 
@@ -107,12 +108,13 @@
                   <ColumnDefinition Width="2*"/>
                </Grid.ColumnDefinitions>
 
-               <TextBlock Name="PartNameTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
-               TextAlignment="Right"/>
+               <TextBlock Name="PartNameTxBl" Grid.Column="0" 
+                          Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
+                          TextAlignment="Right"/>
                <EgtWPFLib:EgtTextBox Name="PartNameTxBx" Grid.Column="1" Width="130"
-               Style="{StaticResource OmagCut_KeyboardTextBox}"/>
+                                     Style="{DynamicResource OmagCut_KeyboardTextBox}"/>
                <Button Name="TrfDataBtn" Grid.Column="1" 
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                       Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
             </Grid>
 
@@ -122,24 +124,25 @@
                   <ColumnDefinition Width="1*"/>
                </Grid.ColumnDefinitions>
 
-            <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"
-               TextAlignment="Right"/>
-            <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60"
-               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+               <TextBlock Name="PartNumTxBl" Grid.Column="0" 
+                          Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
+                          TextAlignment="Right"/>
+               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
             </Grid>
 
             <Button Name="OkBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
             <Button Name="ExitBtn" Grid.Column="4" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
-            
+
          </Grid>
-         
+
       </Grid>
-      
+
    </Border>
 
 </UserControl>

DrawImport/DrawPageUC.xaml.vb

@@ -1,5 +1,4 @@
-Imports System.Globalization
-Imports EgtUILib
+Imports EgtUILib
 Imports EgtWPFLib
 
 Public Class DrawPageUC
@@ -41,6 +40,9 @@ Public Class DrawPageUC
    Friend m_bDrawOk As Boolean = False
    Private m_bFirst As Boolean = True
 
+   Private m_SelListHole As New List(Of Integer)
+   Private m_DeselectListHole As New List(Of Integer)
+
    ' questa variabile serve per risalire al nome della componente che ospita i componenti interni att
    Friend m_sMainCompo As String = String.Empty
 
@@ -105,6 +107,9 @@ Public Class DrawPageUC
          Return m_nSelectedLayer
       End Get
    End Property
+   Public Sub SetCurrLayer(ByVal nCurrLayer As Integer)
+      m_nSelectedLayer = nCurrLayer
+   End Sub
 
    Enum Pages
       MainComponent
@@ -277,6 +282,19 @@ Public Class DrawPageUC
       m_sCsvOrder = ""
       m_sCsvList = ""
       m_sCsvName = ""
+
+      ' Visuliazzazione dei bottoni per modifica dei componenti
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         SideAngleBtn.Visibility = Visibility.Hidden
+         FiloTopBtn.Visibility = Visibility.Hidden
+         EngraveBtn.Visibility = Visibility.Hidden
+         DripCutBtn.Visibility = Visibility.Hidden
+      Else
+         SideAngleBtn.Visibility = Visibility.Visible
+         FiloTopBtn.Visibility = Visibility.Visible
+         EngraveBtn.Visibility = Visibility.Visible
+         DripCutBtn.Visibility = Visibility.Visible
+      End If
    End Sub
 
    ' recupero il click sulla scena ed assegno il metodo a secondo della pagina aperta
@@ -357,6 +375,8 @@ Public Class DrawPageUC
          Dim nCmpInfo As Integer = 0
          If EgtGetInfo(nHLId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
             EgtSetStatus(nHLId, GDB_ST.ON_)
+            ' nascondo eventuali FiloTop
+            m_CompoDimension.SetStatusVisibilityInLoopReference(nCmp, GDB_ST.OFF)
             Exit While
          End If
          nHLId = EgtGetNextName(nHLId, "HoleLabels")
@@ -390,7 +410,7 @@ Public Class DrawPageUC
                   m_nSelectedLayer = GDB_ID.NULL
                   SideAngle.WriteSideAngleForNest(DrawScene.GetCtx())
                   ' Messaggio di selezione da effettuare
-                  MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+                  MessageTxBx.Text = EgtMsg(90386)   ' Selezionare un contorno
                   MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
                Else
                   Dim nLayId As Integer = EgtGetFirstNameInGroup(nPartId, NAME_OUTLOOP)
@@ -459,21 +479,25 @@ Public Class DrawPageUC
                   EgtDeselectObj(nId)
                   EgtDeselectObj(nLayId)
                   Dim sLayName As String = ""
-                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-                     EgtRemoveInfo( nLayId, INFO_FILOTOP)
-                     EgtRemoveInfo( nLayId, INFO_OFFSET)
-                     EgtRemoveInfo( nLayId, INFO_DEPTH)
-                     EgtResetColor( nLayId)
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+                     EgtRemoveInfo(nLayId, INFO_FILOTOP)
+                     EgtRemoveInfo(nLayId, INFO_OFFSET)
+                     EgtRemoveInfo(nLayId, INFO_DEPTH)
+                     EgtResetColor(nLayId)
                   End If
+                  m_DeselectListHole.Add(nLayId)
+                  m_SelListHole.Remove(nLayId)
                Else
                   Dim sLayName As String = ""
-                  If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
-                     EgtSelectObj( nId)
-                     EgtSelectObj( nLayId)
-                     EgtSetInfo( nLayId, INFO_FILOTOP, 1)
-                     EgtSetInfo( nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
-                     EgtSetInfo( nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
-                     EgtSetColor( nLayId, New Color3d(255, 255, 255))
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
+                     EgtSelectObj(nId)
+                     EgtSelectObj(nLayId)
+                     EgtSetInfo(nLayId, INFO_FILOTOP, 1)
+                     EgtSetInfo(nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
+                     EgtSetInfo(nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
+                     EgtSetColor(nLayId, New Color3d(255, 255, 255))
+                     m_SelListHole.Add(nLayId)
+                     m_DeselectListHole.Remove(nLayId)
                   End If
                End If
                EgtDraw()
@@ -481,6 +505,8 @@ Public Class DrawPageUC
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      m_FiloTopUC.CreateFiloTopPreView(m_SelListHole)
+      m_FiloTopUC.EraseFiloTopPreview(m_DeselectListHole)
    End Sub
 
    Private Sub OnShowDistanceVector(sender As Object, vtDist As Vector3d) Handles DrawScene.OnShowDistanceVector
@@ -539,6 +565,7 @@ Public Class DrawPageUC
       OkBtn.IsEnabled = True
    End Sub
 
+   ' Navigazione nelle due pagine per la selezione dei componenti da disegnare
    Friend Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       DrawPage_Unloaded(sender, e)
@@ -630,10 +657,17 @@ Public Class DrawPageUC
          m_CompoDimension.GetNameEdit(j).Text = m_CVars(i - 1).m_sName
          m_CompoDimension.GetNameEdit(j).Visibility = Windows.Visibility.Visible
          m_CompoDimension.GetValueEdit(j).Text = m_CVars(i - 1).ToString()
+         'Dim dVal As Double
+         'StringToLen(m_CVars(i - 1).ToString(), dVal)
+         'm_CompoDimension.GetValueEdit(j).Text = LenToString(dVal, 3)
          m_CompoDimension.GetValueEdit(j).Visibility = Windows.Visibility.Visible
          If m_CVars(i - 1).m_nType = 5 Then
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).Keyboard = EgtTextBox.KeyboardType.Alphanumeric
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).KeyboardDimension = 600
+         ElseIf m_CVars(i - 1).m_nType = 4 Then
+            TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).Keyboard = EgtTextBox.KeyboardType.Calculator
+            TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).IsLength = False
+            TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).KeyboardDimension = 300
          Else
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).Keyboard = EgtTextBox.KeyboardType.Calculator
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).KeyboardDimension = 300
@@ -879,6 +913,9 @@ Public Class DrawPageUC
 
    ' permette di inserire più di un part
    Private Function MakeMultipleInsert(ByVal nNbr As Integer, sName As String) As Boolean
+
+      Dim InsertColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
+
       ' Imposto il contesto corrente
       EgtSetCurrentContext(DrawScene.GetCtx())
       Dim Pz As Integer = -1
@@ -887,11 +924,12 @@ Public Class DrawPageUC
       ' Cancello layer regioni per selezione buchi
       Pz = EgtGetFirstGroupInGroup(GDB_ID.ROOT)
 
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As String = String.Empty
+
       While Pz <> -1
          ' imposto il contesto corrente
          EgtSetCurrentContext(DrawScene.GetCtx())
-         ' salvo il file temporaneo per studio delle alzatine
-         EgtSaveFile("c:\EgtData\OmagCUT\Temp\TempAlzatine.nge", NGE.CMPTEXT)
          ' cerco un altro pezzo nell'elenco
          NxtPz = EgtGetNextPart(Pz)
 
@@ -1014,11 +1052,20 @@ Public Class DrawPageUC
          SideAngle.WriteSideAngleForNest(DrawScene.GetCtx())
          ' Imposto colore testi
          Utility.SetTextColor(nRegLayId)
+         ' Imposto il colore del pezzo inserito nel progetto
+         EgtSetColor(nRegLayId, InsertColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType( EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
+            EntId = EgtGetNext(EntId)
+         End While
+
          ' Esporto il pezzo in un file temporaneo
          Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\FlatPartCompo.Nge"
          If Not EgtSaveObjToFile(Pz, sTmpFile, NGE.BIN) Then
             Return False
          End If
+
          ' Passo al contesto principale
          EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
          ' Recupero flag per inserimento diretto in grezzo (altrimenti in parcheggio)
@@ -1027,6 +1074,11 @@ Public Class DrawPageUC
          EgtEraseEmptyParts()
          ' Area dei nuovi pezzi
          Dim dNewArea As Double = 0
+
+         If nNbr > 1 Then
+            sGUICode = System.Guid.NewGuid.ToString
+         End If
+
          ' Se esiste il file del pezzo
          If My.Computer.FileSystem.FileExists(sTmpFile) Then
             ' eseguo inserimento
@@ -1041,15 +1093,33 @@ Public Class DrawPageUC
                If m_bTrfData Then EgtSetInfo(nId2, "CsvPart", m_TrfOrderCode & "-" & nId2.ToString())
                ' Aggiorno l'area dei nuovi pezzi
                dNewArea += GeomCalc.GetPartArea(nId2)
-               ' Inserisco in parcheggio
+
+               ' assegno l'identificatico del pezzo, se esiste
+               If Not String.IsNullOrEmpty(sGUICode) Then
+                  Dim sPreGuid As String = CreatePreGuidCode(nId2)
+                  EgtSetInfo(nId2, INFO_REFGROUP, sPreGuid & sGUICode)
+               End If
+               ' muovo il pezzo nella prima posizione di parcheggio libera
                m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId2, True)
-               ' Se richiesto posizionamento diretto, lo eseguo
-               If bDirect Then
-                  If m_MainWindow.m_CadCutPageUC.m_NestPage.InsertOnePart(nId2) Then
-                     ' Eventuale notifica al VeinMatching
-                     VeinMatching.OnInsertPartInRaw(nId2)
+
+               ' ------------------------ AGGIUNGO PEZZO NEL VEINMATCH ----------------------------------
+               ' verifico che il pezzo sia un Piano Cucina o un Piano Bagno o un'Aletta
+               Dim sCMP As String = String.Empty
+               EgtGetInfo(nId2, "CMP", sCMP)
+               If sCMP.StartsWith("PCucina") Or sCMP.StartsWith("PBagno") Or sCMP.StartsWith("AlzFront") Then
+                  ' Aggiungo riferimento e lo inserisco in VeinMatching
+                  VeinMatching.SetRefOnPart(nId2)
+                  VeinMatching.AddPartFromDraw(nId2)
+                  ' Se richiesto posizionamento diretto, lo eseguo
+                  If bDirect Then
+                     If m_MainWindow.m_CadCutPageUC.m_NestPage.InsertOnePart(nId2) Then
+                        ' Eventuale notifica al VeinMatching
+                        VeinMatching.OnInsertPartInRaw(nId2)
+                     End If
                   End If
                End If
+               ' ------------------------ AGGIUNGO PEZZO NEL VEINMATCH ----------------------------------
+
             Next
             ' Cancello il file
             My.Computer.FileSystem.DeleteFile(sTmpFile)
@@ -1067,6 +1137,33 @@ Public Class DrawPageUC
       Return True
    End Function
 
+   Private Function MakeSectionFrameInsert(ByVal nNbr As Integer) As Boolean
+      ' m_MainWindow.m_ImportPageUC.LoadFrame()
+      ' recupero il primo layer del primo pezzo
+      Dim nLayerId As Integer = EgtGetFirstLayer(EgtGetFirstPart())
+      If nLayerId = GDB_ID.NULL Then Return False
+      ' percorso in cui salvare tempora
+      Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\Frame.Nge"
+      If Not EgtSaveObjToFile(nLayerId, sTmpFile, NGE.BIN) Then Return False
+      ' Passo al contesto principale
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' Inserisco il pezzo
+      If Not My.Computer.FileSystem.FileExists(sTmpFile) Then Return False
+      ' eseguo inserimento
+      For i As Integer = 1 To nNbr
+         EgtInsertFile(sTmpFile)
+         ' Ne recupero l'Id
+         Dim nPartId As Integer = EgtGetLastPart()
+         ' Creo la cornice
+         m_MainWindow.m_FrameCutPageUC.CreateFrame(nPartId)
+         ' Ricalcolo lavorazioni
+         AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
+      Next
+      ' Cancello il file
+      My.Computer.FileSystem.DeleteFile(sTmpFile)
+      Return True
+   End Function
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_bBackFromInternalCompo = False
       m_bInternalCompo = False
@@ -1082,22 +1179,47 @@ Public Class DrawPageUC
       Dim InsNbr As Integer = Int32.Parse(PartNumTxBx.Text)
       ' Passo al contesto principale
       'MakeInsert(InsNbr, sPartName)
-      MakeMultipleInsert(InsNbr, sPartName)
-      ' Aggiorno ambiente principale
-      EgtZoom(ZM.ALL)
-      ' Elimino nome del componente precedente
-      m_sCompoName = String.Empty
-      ' Reset inclinazioni
-      m_SideAngleUC.DeleteSideAngle()
-      ' Chiudo compo interni nel caso siano aperti
-      LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
-      LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
-      LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
-      ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
-      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
-      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         MakeSectionFrameInsert(InsNbr)
+      Else
+         MakeMultipleInsert(InsNbr, sPartName)
+      End If
+      ' Attivo il parcheggio dei pezzi Draw (per il corretto posizionamento nella scena)
+      ActivateParkIndZero()
+      Dim bExitPage As Boolean = GetPrivateProfileInt(S_GENERAL, K_QUITDRAWPAGE, 1, m_MainWindow.GetIniFile) <> 0
+      ' Se Shift premuto eseguo il contrario
+      If (Keyboard.Modifiers And ModifierKeys.Shift) > 0 Then
+         bExitPage = Not bExitPage
+      End If
+      If bExitPage Then
+         ' Aggiorno ambiente principale
+         EgtZoom(ZM.ALL)
+         ' Elimino nome del componente precedente
+         m_sCompoName = String.Empty
+         ' Reset inclinazioni
+         m_SideAngleUC.DeleteSideAngle()
+         ' Chiudo compo interni nel caso siano aperti
+         LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
+         LeftButtonGrd.Children.Remove(m_CompoDimension.m_InternalCompoPage)
+         LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
+         ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
+         m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
+      Else
+         m_SceneButtons.MeasureBtn.IsChecked = False
+         DrawPage_Unloaded(sender, e)
+         ' Elimino nome del componente precedente
+         m_sCompoName = String.Empty
+         ' Reset inclinazioni
+         m_SideAngleUC.DeleteSideAngle()
+         If String.IsNullOrEmpty(m_MainComponentPage.m_SecondaryComponentPage.m_sCurrCompo) Then
+            DrawPage_Loaded(sender, e)
+         Else
+            LoadSecondaryPage()
+         End If
 
+      End If
    End Sub
 
    ' esco dalla pagina corrente
@@ -1117,14 +1239,34 @@ Public Class DrawPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
+
+   End Sub
+
+   Private Sub ActivateParkIndZero()
+      ' Aggiorno la gestione dei parcheggi: spengo tutti i parcheggi tranne quello dei pezzi disegnati "0"
+      Dim ListParkInd As New List(Of ParkInd)
+      SelParkIndWD.LoadParkInd(ListParkInd)
+      For Each ItemParkInd As ParkInd In ListParkInd
+         If ItemParkInd.Ind = 0 Then
+            ItemParkInd.Status = GDB_ST.ON_
+         Else
+            ItemParkInd.Status = GDB_ST.OFF
+         End If
+      Next
+      ' Aggiorno lo stato dei pezzi 
+      For Each Item As ParkInd In ListParkInd
+         SelParkIndWD.SetStatusPartInParkInd(Item, False)
+      Next
    End Sub
 
    Private Sub TrfDataBtn_Click(sender As Object, e As RoutedEventArgs) Handles TrfDataBtn.Click
       If m_bTrfData Then
          Dim DlgTrfData As New CompoTrfData(m_MainWindow)
+         ' carico i dati appena salvati nella pagina
          DlgTrfData.SetData(m_TrfOrderCode, m_TrfOrderDesc, m_TrfPartCode, m_TrfMatCode, m_TrfSurfCode, m_TrfThickness)
          If DlgTrfData.ShowDialog() Then
+            ' recupero i dati salvati nella pagina
             DlgTrfData.GetData(m_TrfOrderCode, m_TrfOrderDesc, m_TrfPartCode, m_TrfMatCode, m_TrfSurfCode, m_TrfThickness)
          End If
       ElseIf m_bCsvData Then
@@ -1161,7 +1303,7 @@ Public Class DrawPageUC
          If EgtGetFirstNameInGroup(EgtGetFirstPart(), NAME_INLOOP) = GDB_ID.NULL Then
             m_nSelectedLayer = EgtGetFirstNameInGroup(EgtGetFirstPart(), NAME_OUTLOOP)
          Else
-            MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+            MessageTxBx.Text = EgtMsg(90386)   ' Selezionare un contorno
             MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
             ' Aggiungo testi su lati già inclinati
             SideAngle.WriteSideAngleForNest(DrawScene.GetCtx())
@@ -1203,6 +1345,8 @@ Public Class DrawPageUC
    Private Sub EngraveBtn_Click(sender As Object, e As RoutedEventArgs) Handles EngraveBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       If EngraveBtn.IsChecked Then
+         ' Aumento lo spazio disponibile per inserirei i parametri (tolgo spazio ad eventuali messaggi)
+         Grid.SetRowSpan(VariablesGrd, 2)
          ' Imposto modalità
          m_SideAngleUC.m_Mode = SideAngleUC.ModeOpt.ENGRAVE
          If m_ActiveComponentPage = Pages.CompoDimension Then
@@ -1225,7 +1369,7 @@ Public Class DrawPageUC
          If EgtGetFirstNameInGroup(EgtGetFirstPart(), NAME_INLOOP) = GDB_ID.NULL Then
             m_nSelectedLayer = EgtGetFirstNameInGroup(EgtGetFirstPart(), NAME_OUTLOOP)
          Else
-            MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+            MessageTxBx.Text = EgtMsg(90386)   ' Selezionare un contorno
             MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
          End If
          ' In ogni caso, nascondo layer delle misure
@@ -1234,6 +1378,7 @@ Public Class DrawPageUC
          EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
          EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
       Else
+         Grid.SetRowSpan(VariablesGrd, 2)
          VariablesGrd.Children.Remove(m_SideAngleUC)
          If m_PrevSideAnglePage = Pages.CompoDimension Then
             VariablesGrd.Children.Add(m_CompoDimension)
@@ -1286,7 +1431,7 @@ Public Class DrawPageUC
          If EgtGetFirstNameInGroup(EgtGetFirstPart(), NAME_INLOOP) = GDB_ID.NULL Then
             m_nSelectedLayer = EgtGetFirstNameInGroup(EgtGetFirstPart(), NAME_OUTLOOP)
          Else
-            MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+            MessageTxBx.Text = EgtMsg(90386)   ' Selezionare un contorno
             MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
          End If
          ' In ogni caso, nascondo layer delle misure
@@ -1323,6 +1468,8 @@ Public Class DrawPageUC
    End Sub
 
    Private Sub FiloTopBtn_Click(sender As Object, e As RoutedEventArgs) Handles FiloTopBtn.Click
+      m_SelListHole.Clear()
+      m_DeselectListHole.Clear()
       m_SceneButtons.MeasureBtn.IsChecked = False
       If FiloTopBtn.IsChecked Then
          ' Imposto modalità
@@ -1336,25 +1483,25 @@ Public Class DrawPageUC
             m_PrevSideAnglePage = Pages.AlzFront
             LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
          End If
-         VariablesGrd.Children.Add( m_FiloTopUC)
+         VariablesGrd.Children.Add(m_FiloTopUC)
          SideAngleBtn.IsEnabled = False
          EngraveBtn.IsEnabled = False
          DripCutBtn.IsEnabled = False
          MessageGrid.Visibility = Windows.Visibility.Hidden
          BackBtn.Visibility = Windows.Visibility.Hidden
-         MessageTxBx.Text = EgtMsg( MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+         MessageTxBx.Text = EgtMsg(90386)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
          ' In ogni caso, nascondo layer delle misure
-         Dim PartId As Integer = EgtGetFirstInGroup( GDB_ID.ROOT)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_AUX), GDB_ST.OFF)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
-         EgtSetStatus(EgtGetFirstNameInGroup( PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
+         Dim PartId As Integer = EgtGetFirstInGroup(GDB_ID.ROOT)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_AUX), GDB_ST.OFF)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
+         EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
       Else
-         VariablesGrd.Children.Remove( m_FiloTopUC)
+         VariablesGrd.Children.Remove(m_FiloTopUC)
          If m_PrevSideAnglePage = Pages.CompoDimension Then
-            VariablesGrd.Children.Add( m_CompoDimension)
+            VariablesGrd.Children.Add(m_CompoDimension)
          ElseIf m_PrevSideAnglePage = Pages.InternalComponent Then
-            LeftButtonGrd.Children.Add( m_CompoDimension.m_InternalCompoPage)
+            LeftButtonGrd.Children.Add(m_CompoDimension.m_InternalCompoPage)
          End If
          SideAngleBtn.IsEnabled = m_bEnableSideAngle
          EngraveBtn.IsEnabled = True
@@ -1382,22 +1529,49 @@ Public Class DrawPageUC
       ' Seleziono la Tab e la Page di apertura
       Select Case m_ActiveComponentPage
          Case Pages.MainComponent
-            LeftButtonGrd.Children.Remove( m_MainComponentPage)
-         Case Pages.SecondaryComponent
-            LeftButtonGrd.Children.Remove( m_MainComponentPage.m_SecondaryComponentPage)
-         Case Pages.InternalComponent
-            LeftButtonGrd.Children.Remove( m_MainWindow.m_DrawPageUC.m_CompoDimension.m_InternalCompoPage)
-         Case Pages.CompoDimension
-            VariablesGrd.Children.Remove( m_CompoDimension)
-         Case Pages.SideAngle
-            VariablesGrd.Children.Remove( m_SideAngleUC)
-         Case Pages.FiloTop
-            VariablesGrd.Children.Remove(m_FiloTopUC)
-      End Select
+            LeftButtonGrd.Children.Remove(m_MainComponentPage)
 
+         Case Pages.SecondaryComponent
+            LeftButtonGrd.Children.Remove(m_MainComponentPage.m_SecondaryComponentPage)
+
+         Case Pages.InternalComponent
+            LeftButtonGrd.Children.Remove(m_MainWindow.m_DrawPageUC.m_CompoDimension.m_InternalCompoPage)
+
+         Case Pages.CompoDimension
+            VariablesGrd.Children.Remove(m_CompoDimension)
+
+         Case Pages.SideAngle
+            Select Case m_SideAngleUC.m_Mode
+               Case SideAngleUC.ModeOpt.SIDEANGLE
+                  SideAngleBtn.IsChecked = False
+                  SideAngleBtn_Click(Nothing, Nothing)
+               Case SideAngleUC.ModeOpt.ENGRAVE
+                  EngraveBtn.IsChecked = False
+                  EngraveBtn_Click(Nothing, Nothing)
+               Case SideAngleUC.ModeOpt.DRIP
+                  DripCutBtn.IsChecked = False
+                  DripCutBtn_Click(Nothing, Nothing)
+            End Select
+            VariablesGrd.Children.Remove(m_SideAngleUC)
+
+         Case Pages.FiloTop
+            FiloTopBtn.IsChecked = False
+            FiloTopBtn_Click(Nothing, Nothing)
+            VariablesGrd.Children.Remove(m_FiloTopUC)
+
+         Case Pages.AlzFront
+            LeftButtonGrd.Children.Remove(m_CompoDimension.m_AlzFrontPage)
+
+      End Select
       ' Pulisco l'ambiente lua
       ResetLuaVariables()
 
+      Try
+         VariablesGrd.Children.Remove(m_CompoDimension)
+      Catch ex As Exception
+         Dim x As Boolean = True
+      End Try
+
    End Sub
 
    Private Class CompoVar
@@ -1428,7 +1602,10 @@ Public Class DrawPageUC
             Case 2        ' intero
                Return m_nVal.ToString()
             Case 3        ' lunghezza
-               Return DoubleToString(EgtToUiUnits(m_dVal), 4)
+               'Dim dVal As Double
+               'StringToLen(m_sVal, dVal)
+               Return LenToString(m_dVal, 4)
+               'Return DoubleToString(EgtToUiUnits(m_dVal), 4)
             Case 4        ' double
                Return DoubleToString(m_dVal, 4)
             Case 5        ' stringa
@@ -1453,12 +1630,13 @@ Public Class DrawPageUC
                End If
             Case 3        ' lunghezza
                Dim dVal As Double
-               If StringToDouble(sVal, dVal) Then
-                  If bConvertUnits Then
-                     m_dVal = EgtFromUiUnits(dVal)
-                  Else
-                     m_dVal = dVal
-                  End If
+               If bConvertUnits Then
+                  StringToLen(sVal, dVal)
+                  m_dVal = dVal
+                  Return True
+               Else
+                  StringToDouble(sVal, dVal)
+                  m_dVal = dVal
                   Return True
                End If
             Case 4        ' double

DrawImport/FiloTopUC.xaml

@@ -1,11 +1,11 @@
 <UserControl x:Class="FiloTopUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="597.1" d:DesignWidth="255.9">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.1" d:DesignWidth="255.9">
 
    <!-- Definizione della Grid Laterale -->
    <Grid Name="VariablesCompoGrid"  Grid.RowSpan="2">
@@ -32,16 +32,21 @@
 
 
       <TextBlock Name="ParameterTxBl" Grid.Row="10" Text="Offset"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                 FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
       <EgtWPFLib:EgtTextBox Name="ParameterTxBx" Grid.Column="1" Grid.Row="10" Width="90"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <TextBlock Name="Parameter2TxBl" Grid.Row="11" Text="Affondamento"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                 FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
       <EgtWPFLib:EgtTextBox Name="Parameter2TxBx" Grid.Column="1" Grid.Row="11" Width="90"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+      <TextBlock Name="Parameter3TxBl" Grid.Row="12" Text="Arrotonda"
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                 FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+      <CheckBox Name="Parameter3ChBx" Grid.Row="12" Grid.Column="1" 
+                Style="{DynamicResource OmagCut_CheckBox_Single}"
+                HorizontalAlignment="Center" Margin="0,0,6,0"/>
    </Grid>
 
 </UserControl>

DrawImport/FiloTopUC.xaml.vb

@@ -7,6 +7,8 @@ Public Class FiloTopUC
    ' Riferimento alla pagina che ha aperto SideAngleUC
    Private m_CallingPage As MainWindow.Pages
 
+   Private m_SelList As New List(Of Integer)
+
    ' Offset della sfilettatura
    Private m_dFiloTopOffset As Double = 0
    Friend ReadOnly Property FiloTopOffset As Double
@@ -23,34 +25,46 @@ Public Class FiloTopUC
       End Get
    End Property
 
+   ' esegue l'arrotindamento sugli angoli del percorso utensile
+   Private m_bCornerradius As Boolean = False
+   Friend ReadOnly Property bCornerRadius As Boolean
+      Get
+         Return m_bCornerradius
+      End Get
+   End Property
 
    Private Sub FiloTopUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Imposto riferimenti ad altre pagine
       m_CallingPage = m_MainWindow.m_ActivePage
 
       ' Imposto messaggi
-      ParameterTxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 10)       ' Offset
-      Parameter2TxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      ParameterTxBl.Text = EgtMsg(90460)       ' Offset
+      Parameter2TxBl.Text = EgtMsg(90461)      ' Affondamento
+      Parameter3TxBl.Text = EgtMsg(91138)      ' Arrotonda 
 
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Imposto questa come pagina correntemente visualizzata nella drawpage
          m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.FiloTop
          ' Imposto contesto corrente
-         EgtSetCurrentContext( m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
+         EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
       ElseIf m_CallingPage = MainWindow.Pages.Import Then
          ' Imposto contesto corrente
-         EgtSetCurrentContext( m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
+         EgtSetCurrentContext(m_MainWindow.m_ImportPageUC.ImportScene.GetCtx())
       End If
 
       ' Gestisco visualizzazione dei parametri
-      Parameter2TxBl.Visibility = Windows.Visibility.Visible
+      ParameterTxBl.Visibility = Windows.Visibility.Visible
       Parameter2TxBx.Visibility = Windows.Visibility.Visible
+      Parameter3TxBl.Visibility = Windows.Visibility.Visible
 
       ' Aggiorno valori
-      m_dFiloTopOffset = GetPrivateProfileDouble( S_SIDES, K_FILOTOPOFFSET, 5, m_MainWindow.GetIniFile())
-      ParameterTxBx.Text = LenToString( m_dFiloTopOffset, 3)
-      m_dFiloTopDepth = GetPrivateProfileDouble( S_SIDES, K_FILOTOPDEPTH, 5, m_MainWindow.GetIniFile())
-      Parameter2TxBx.Text = LenToString( m_dFiloTopDepth, 3)
+      m_dFiloTopOffset = GetPrivateProfileDouble(S_SIDES, K_FILOTOPOFFSET, 5, m_MainWindow.GetIniFile())
+      ParameterTxBx.Text = LenToString(m_dFiloTopOffset, 3)
+      m_dFiloTopDepth = GetPrivateProfileDouble(S_SIDES, K_FILOTOPDEPTH, 5, m_MainWindow.GetIniFile())
+      Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
+      m_bCornerradius = GetPrivateProfileInt(S_SIDES, K_ROUNDOFF, 0, m_MainWindow.GetIniFile()) <> 0
+      Parameter3ChBx.IsChecked = m_bCornerradius
+      m_SelList.Clear()
    End Sub
 
    Private Sub FiloTopUC_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
@@ -67,13 +81,15 @@ Public Class FiloTopUC
          Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
          While nLayId <> GDB_ID.NULL
             Dim sLayName As String = ""
-            If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-               EgtSetInfo( nLayId, INFO_OFFSET, m_dFiloTopOffset)
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_OFFSET, m_dFiloTopOffset)
             End If
             nLayId = EgtGetNextLayer(nLayId)
          End While
          nPartId = EgtGetNextPart(nPartId)
       End While
+      ' aggiorno la preview
+      CreateFiloTopPreView(m_SelList, False)
    End Sub
 
    Private Sub Parameter2TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter2TxBx.EgtClosed
@@ -86,8 +102,8 @@ Public Class FiloTopUC
          Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
          While nLayId <> GDB_ID.NULL
             Dim sLayName As String = ""
-            If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-               EgtSetInfo( nLayId, INFO_DEPTH, m_dFiloTopDepth)
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_DEPTH, m_dFiloTopDepth)
             End If
             nLayId = EgtGetNextLayer(nLayId)
          End While
@@ -95,4 +111,164 @@ Public Class FiloTopUC
       End While
    End Sub
 
+   Private Sub Parameter3ChBx_Checked() Handles Parameter3ChBx.Click
+      ' Assegno il valore
+      m_bCornerradius = Parameter3ChBx.IsChecked
+      WritePrivateProfileString(S_SIDES, K_ROUNDOFF, If(m_bCornerradius, "1", "0"), m_MainWindow.GetIniFile())
+      ' Aggiorno le info del profilo
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+               EgtSetInfo(nLayId, INFO_ROUNDOFF, If(m_bCornerradius, 1, 0))
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      ' aggiorno la preview (False = blocco la lettura dei dati della componente)
+      CreateFiloTopPreView(m_SelList, False)
+   End Sub
+
+   Public Sub CreateFiloTopPreView(SelList As List(Of Integer), Optional bReadInfo As Boolean = True)
+      m_SelList = SelList
+      If m_SelList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            ' verifico che lemento corrente appartenga all'elenco degli elementi selezionati
+            Dim bIsSelected As Boolean = m_SelList.Find(Function(value As Integer)
+                                                           Return value = nLayId
+                                                        End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' verifico il Layer "FiloTop" sia associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer "FiloTop"
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' lo creo
+                  nLayFiloTop = EgtCreateGroup(nPartId)
+                  EgtSetName(nLayFiloTop, "FiloTop")
+                  EgtSetInfo(nLayFiloTop, "InLoopRef", nLayId)
+                  EgtSetInfo(nLayId, "FiloTopRef", nLayFiloTop)
+               End If
+
+               ' carico i dati del filo top selezionato
+               If bReadInfo Then
+                  EgtGetInfo(nLayFiloTop, INFO_OFFSET, m_dFiloTopOffset)
+                  ParameterTxBx.Text = LenToString(m_dFiloTopOffset, 3)
+                  EgtGetInfo(nLayFiloTop, INFO_DEPTH, m_dFiloTopDepth)
+                  Parameter2TxBx.Text = LenToString(m_dFiloTopDepth, 3)
+                  Dim nVal As Integer = If(m_bCornerradius, 1, 0)
+                  EgtGetInfo(nLayFiloTop, INFO_ROUNDOFF, nVal)
+                  Parameter3ChBx.IsChecked = If(nVal = 1, True, False)
+                  m_bCornerradius = Parameter3ChBx.IsChecked
+               End If
+
+               ' procedo alla creazione della curva
+               Dim nIdCompoCurve As Integer = GDB_ID.NULL
+               ' cancello un eventuale curva composita creata in precedenza
+               nIdCompoCurve = EgtGetFirstNameInGroup(nLayFiloTop, "OffsetPreView")
+               If nIdCompoCurve <> GDB_ID.NULL Then
+                  EgtErase(nIdCompoCurve)
+               End If
+               Dim nCompoCurve As New List(Of Integer)
+               ' costruisco il percorso chiuso dati i lati di contorno 
+               Dim nLine As Integer = EgtGetFirstInGroup(nLayId)
+               While nLine <> GDB_ID.NULL
+                  nCompoCurve.Add(nLine)
+                  nLine = EgtGetNext(nLine)
+               End While
+               Dim PtNearStart As Point3d
+               Dim nInfoRoundOff As Integer = If(m_bCornerradius, 1, 0)
+
+               nIdCompoCurve = EgtCreateCurveCompoByChain(nLayFiloTop, nCompoCurve.ToArray, PtNearStart, False)
+               EgtSetName(nIdCompoCurve, "OffsetPreView")
+
+               ' salvo i dati nel layer FiloTop
+               EgtSetInfo(nLayFiloTop, INFO_OFFSET, m_dFiloTopOffset)
+               EgtSetInfo(nLayFiloTop, INFO_DEPTH, m_dFiloTopDepth)
+               EgtSetInfo(nLayFiloTop, INFO_ROUNDOFF, nInfoRoundOff)
+
+               Dim bOk As Boolean = False
+               ' leggo che tipo di offset applicare (Round, Extend)
+               If nInfoRoundOff <> 1 Then
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dFiloTopOffset, OFF_TYPE.EXTEND)
+               Else
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dFiloTopOffset, OFF_TYPE.FILLET)
+               End If
+
+               ' se la generazione della curva non va a buon fine
+               If Not bOk Then
+                  EgtErase(nLayFiloTop)
+                  EgtRemoveInfo(nLayId, "FiloTopRef")
+                  EgtOutLog("Error in generation OffsetPreView in TopEgde ")
+               Else
+                  m_MainWindow.m_DrawPageUC.MessageTxBx.Text = ""
+                  m_MainWindow.m_DrawPageUC.MessageBrd.Background = Brushes.Transparent
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+   ' riceve la lista dei LayerFiloTop che devono essere eliminati
+   Public Sub EraseFiloTopPreview(EraseList As List(Of Integer))
+      Dim m_EraseList As List(Of Integer) = EraseList
+      If m_EraseList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            Dim bIsSelected As Boolean = m_EraseList.Find(Function(value As Integer)
+                                                             Return value = nLayId
+                                                          End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' cerco il Layer associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' esco 
+                  Return
+               Else
+                  ' lo elimino
+                  EgtErase(nLayFiloTop)
+                  EraseList.Remove(nLayId)
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+
 End Class

DrawImport/ImportPageUC.xaml

@@ -1,11 +1,11 @@
 <UserControl x:Class="ImportPageUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="ImportPage_Initialized" Loaded="ImportPage_Loaded" Unloaded="ImportPage_Unloaded">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="ImportPage_Initialized" Loaded="ImportPage_Loaded" Unloaded="ImportPage_Unloaded">
 
    <!-- Definizione della ImportPage -->
    <Border>
@@ -20,7 +20,7 @@
             <RowDefinition Height="1*"/>
          </Grid.RowDefinitions>
 
-         
+
          <!-- Definizione della Grid superiore per Button -->
          <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
             <Grid.ColumnDefinitions>
@@ -33,15 +33,17 @@
             </Grid.ColumnDefinitions>
 
             <ToggleButton Name="SideAngleBtn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                          Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
             <ToggleButton Name="FiloTopBtn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                          Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
             <ToggleButton Name="DripCutBtn" Grid.Column="2" Padding="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                          Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+            <ToggleButton Name="EngraveBtn" Grid.Column="2"
+                          Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
             <ToggleButton Name="DripDrillBtn" Grid.Column="3" Padding="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                          Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
             <Button Name="Cad2dBtn" Grid.Column="4" Padding="0"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                    Style="{DynamicResource OmagCut_YellowTextButton}"/>
          </Grid>
 
          <!-- Definizione della Grid laterale -->
@@ -49,17 +51,31 @@
             <Grid.RowDefinitions>
                <RowDefinition Height="0.5*"/>
                <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="8*"/>
+               <RowDefinition Height="7.25*"/>
+               <RowDefinition Height="0.75*"/>
                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
-            <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
-                ItemsSource="{Binding ItemList}"/>
+            <TextBlock Name="FilePathTxBl" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2"
+                     ItemTemplate="{DynamicResource DataTemplateItem}"
+                     ItemsSource="{Binding ItemList}"/>
 
-            <Border Name="MessageBrd" Grid.Row="4" BorderThickness="0,1,0,0" BorderBrush="Gray">
+            <Grid Name="FinderGrd"  Grid.Row="3" Margin="0,0,8,0">
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="4*"/>
+                  <ColumnDefinition Width="1*"/>
+               </Grid.ColumnDefinitions>
+               <EgtWPFLib:EgtTextBox Name="FindTxBx" Grid.Column="0"
+                                     Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}"/>
+               <Button Name="ClearFindBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Margin="0,6,2,6">
+                  <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Width="30" />
+               </Button>
+            </Grid>
+
+            <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
                <TextBlock Name="MessageTxBx" TextAlignment="Center"
-                   Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                          Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
             </Border>
 
          </Grid>
@@ -99,24 +115,25 @@
                   <ColumnDefinition Width="1*"/>
                </Grid.ColumnDefinitions>
 
-               <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
-                  TextAlignment="Right"/>
-               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60"
-                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+               <TextBlock Name="PartNumTxBl" Grid.Column="0" 
+                          Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
+                          TextAlignment="Right"/>
+               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
+                                     Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             </Grid>
 
             <Button Name="OkBtn" Grid.Column="10" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
 
             <Button Name="ExitBtn" Grid.Column="11" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
             </Button>
-            
+
          </Grid>
-         
+
       </Grid>
-      
+
    </Border>
-   
+
 </UserControl>

DrawImport/ImportPageUC.xaml.vb

@@ -1,7 +1,5 @@
-Imports System.Collections.ObjectModel
-Imports System.IO
+Imports System.IO
 Imports EgtUILib
-Imports System.Runtime.InteropServices
 
 Public Class ImportPageUC
 
@@ -19,6 +17,9 @@ Public Class ImportPageUC
    Friend WithEvents ImportScene As New Scene
    Private ImportSceneHost As New System.Windows.Forms.Integration.WindowsFormsHost
 
+   Private m_SelListHole As New List(Of Integer)
+   Private m_DeselectListHole As New List(Of Integer)
+
    ' Properties
    Private m_sCurrDir As String = String.Empty
    Private m_sCurrFile As String = String.Empty
@@ -35,6 +36,8 @@ Public Class ImportPageUC
    Private Const FT_TRF As Integer = 51
    ' Costante per formato CUT
    Private Const FT_CUT As Integer = 52
+   ' Indice del parcheggio corrente
+   Private NewParkInd As Integer = 0
 
    ' Indentificativo del pezzo selezionato
    Private m_nSelectedPart As Integer = GDB_ID.NULL
@@ -73,19 +76,20 @@ Public Class ImportPageUC
       Me.ImportPageGrid.Children.Add(ImportSceneHost)
 
       'Imposto i messaggi letti dal file dei messaggi
-      UseLayerBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 1)              'Usa layer - Use layers
-      UseRegionBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 2)             'Usa regioni - Use regions
-      UseClosedCurveBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 6)        'Usa curve chiuse - Use closed curves
-      ResetBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 3)                 'Reset
-      mmBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 4)                    'mm
-      inchBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 5)                  'inch
-      OrderListBtn.Content = EgtMsg( 90398)                           'Dati Csv
-      TopBtn.Content = EgtMsg( 90384)                                 'Indica Lato Sopra
-      PartNumTxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 15)                'Numero
-      SideAngleBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 7)             'Inclina lati
-      FiloTopBtn.Content = EgtMsg( 90400)                             'Filo Top
-      DripCutBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 8)               'Incidi da sotto
-      DripDrillBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 14)            'Foro da sotto
+      UseLayerBtn.Content = EgtMsg(90451)              ' Usa layer - Use layers
+      UseRegionBtn.Content = EgtMsg(90452)             ' Usa regioni - Use regions
+      UseClosedCurveBtn.Content = EgtMsg(90456)        ' Usa curve chiuse - Use closed curves
+      ResetBtn.Content = EgtMsg(90453)                 ' Reset
+      mmBtn.Content = EgtMsg(90454)                    ' mm
+      inchBtn.Content = EgtMsg(90455)                  ' inch
+      OrderListBtn.Content = EgtMsg(90398)             ' Dati Csv
+      TopBtn.Content = EgtMsg(90384)                   ' Indica Lato Sopra
+      PartNumTxBl.Text = EgtMsg(90465)                 ' Quantità
+      SideAngleBtn.Content = EgtMsg(90457)             ' Inclina lati
+      FiloTopBtn.Content = EgtMsg(90400)               ' Filo Top
+      DripCutBtn.Content = EgtMsg(90458)               ' Incidi da sotto
+      EngraveBtn.Content = EgtMsg(91238)               ' Engrave
+      DripDrillBtn.Content = EgtMsg(90464)             ' Foro da sotto
       Cad2dBtn.Content = "Cad 2d"
 
       'Definizione del collegamento tra ItemList e ListBox1
@@ -94,13 +98,14 @@ Public Class ImportPageUC
    End Sub
 
    Private Sub ImportPage_Loaded(sender As Object, e As RoutedEventArgs)
-
       ' abilitazione importazione TRF
       m_bEnableTrf = (m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut And
                       m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.TRF_IMPORT))
       ' abilitazione Ordine e Distinta per importazione DXF
       m_bEnableOrderList = (m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut And
                             GetPrivateProfileInt(S_COMPO, K_CSVDATA, 0, m_MainWindow.GetIniFile()) <> 0)
+      ' rendo visibilie il pulsante di ricerca file
+      FinderGrd.Visibility = Visibility.Visible
 
       If m_bFirst Then
          ' imposto colore di default
@@ -154,10 +159,14 @@ Public Class ImportPageUC
       ' Verifico esistenza Cad 2d
       GetPrivateProfileString(S_CAD2D, K_CAD2D_NAME, "", m_sCad2dName, m_MainWindow.GetIniFile())
       GetPrivateProfileString(S_CAD2D, K_CAD2D_EXEPATH, "", m_sCad2dPath, m_MainWindow.GetIniFile())
-      Cad2dBtn.IsEnabled = My.Computer.FileSystem.FileExists( m_sCad2dPath)
+      Cad2dBtn.IsEnabled = My.Computer.FileSystem.FileExists(m_sCad2dPath)
 
       ' Pulisco tutto
       ClearView()
+      ' Definizione di quale comando deve essere visualizzato
+      DripCutBtn.Visibility = If(String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw), Visibility.Hidden, Visibility.Visible)
+      EngraveBtn.Visibility = If(DripCutBtn.Visibility <> Visibility.Visible, Visibility.Visible, Visibility.Hidden)
+
       FileListBox.UnselectAll()
       ' inibisco selezione diretta da Scene
       ImportScene.SetStatusNull()
@@ -169,7 +178,7 @@ Public Class ImportPageUC
          UseClosedCurveBtn.Visibility = Windows.Visibility.Visible
          ResetBtn.Visibility = Windows.Visibility.Visible
          SideAngleBtn.Visibility = Windows.Visibility.Visible
-         OrderListBtn.Visibility = If( m_bEnableOrderList, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+         OrderListBtn.Visibility = If(m_bEnableOrderList, Windows.Visibility.Visible, Windows.Visibility.Hidden)
          TopBtn.Visibility = Windows.Visibility.Visible
          PartNumberGrd.Visibility = Windows.Visibility.Visible
       Else
@@ -179,7 +188,7 @@ Public Class ImportPageUC
          ResetBtn.Visibility = Windows.Visibility.Hidden
          SideAngleBtn.Visibility = Windows.Visibility.Hidden
          OrderListBtn.Visibility = Windows.Visibility.Hidden
-         TopBtn.Visibility = Windows.Visibility.Hidden 
+         TopBtn.Visibility = Windows.Visibility.Hidden
          PartNumberGrd.Visibility = Windows.Visibility.Hidden
       End If
       mmBtn.IsEnabled = True
@@ -196,7 +205,8 @@ Public Class ImportPageUC
       PartNumTxBx.Text = "1"
       ' disabilito ok
       OkBtn.IsEnabled = False
-
+      ' Azzero l'idice di parcheggio
+      NewParkInd = 0
    End Sub
 
    Private Sub LoadGridData()
@@ -297,6 +307,36 @@ Public Class ImportPageUC
       End Select
    End Sub
 
+   Private Sub FindTxBx_EgtClosed(sender As Object, e As EventArgs) Handles FindTxBx.EgtClosed
+      ' Elimino spazi iniziali e finali
+      FindTxBx.Text = FindTxBx.Text.Trim()
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      Dim UpdateListFile As New List(Of IconListBoxItem)
+      ' Se esiste un nome
+      If Not String.IsNullOrWhiteSpace(FindTxBx.Text) Then
+         For Each Item As IconListBoxItem In FileListBox.ItemsSource
+            If Item.Name.ToLower.Contains(FindTxBx.Text.ToLower) Then
+               UpdateListFile.Add(Item)
+            End If
+         Next
+      End If
+      If UpdateListFile.Count > 0 Then
+         FileListBox.ItemsSource = UpdateListFile
+      Else
+         FileListBox.ItemsSource = m_MainWindow.m_ImportItemList
+      End If
+   End Sub
+
+   Private Sub ClearFindBtn_Click() Handles ClearFindBtn.Click
+      ' svuoto la text
+      FindTxBx.Text = ""
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      ' e aggiorno la lista dei file
+      FileListBox.ItemsSource = m_MainWindow.m_ImportItemList
+   End Sub
+
    Private Function ClearView() As Boolean
       ' Pulisco il DB geometrico locale
       EgtNewFile()
@@ -309,13 +349,18 @@ Public Class ImportPageUC
       ResetBtn.IsEnabled = False
       SideAngleBtn.IsEnabled = False
       FiloTopBtn.IsEnabled = False
-      DripCutBtn.IsEnabled = False
+      ' Evito di settare le proprietà di oggeti che sono con visibilità Hidden
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = False
+      Else
+         EngraveBtn.IsEnabled = False
+      End If
       DripDrillBtn.IsEnabled = False
       Return True
    End Function
 
    Private Function LoadCurrFile() As Boolean
-      ' Pulisco il DB geometrico locale
+      ' Pulisco il DB geometrico locale      
       Dim bOk As Boolean = EgtNewFile()
       ' Costruisco path completa del file
       Dim sPath = IO.Path.Combine(m_sCurrDir, m_sCurrFile)
@@ -327,6 +372,10 @@ Public Class ImportPageUC
          Dim dScale As Double = If(m_bMM, ONEMM, ONEINCH)
          ' Importo file DXF
          bOk = bOk AndAlso EgtImportDxf(sPath, dScale)
+         ' riporto al piano tutte le superifici
+         EgtSelectAll()
+         EgtScale(GDB_ID.SEL, Frame3d.GLOB, 1, 1, 0)
+         EgtDeselectAll()
       ElseIf m_nFileType = FT.NGE Then
          ' Carico Nge
          bOk = bOk AndAlso EgtOpenFile(sPath)
@@ -366,7 +415,11 @@ Public Class ImportPageUC
             OkBtn.IsEnabled = False
             SideAngleBtn.IsEnabled = False
             FiloTopBtn.IsEnabled = False
-            DripCutBtn.IsEnabled = False
+            If DripCutBtn.Visibility = Visibility.Visible Then
+               DripCutBtn.IsEnabled = False
+            Else
+               EngraveBtn.IsEnabled = False
+            End If
             DripDrillBtn.IsEnabled = False
          ElseIf m_nFileType = FT_TRF Or m_nFileType = FT_CUT Then
             ' abilito bottone Insert, disabilito bottoni UseLayer, UseClosedCurve, UseRegion e Reset
@@ -382,10 +435,14 @@ Public Class ImportPageUC
             OkBtn.IsEnabled = True
             SideAngleBtn.IsEnabled = False
             FiloTopBtn.IsEnabled = False
-            DripCutBtn.IsEnabled = False
+            If DripCutBtn.Visibility = Visibility.Visible Then
+               DripCutBtn.IsEnabled = False
+            Else
+               EngraveBtn.IsEnabled = False
+            End If
             DripDrillBtn.IsEnabled = False
          End If
-      ' altrimenti import per cornici
+         ' altrimenti import per cornici
       Else
          mmBtn.IsEnabled = (m_nFileType = FT.DXF)
          inchBtn.IsEnabled = (m_nFileType = FT.DXF)
@@ -395,12 +452,12 @@ Public Class ImportPageUC
    End Function
 
    Private Sub OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles ImportScene.OnMouseDownScene
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
-         OnMouseDownSceneSideAngle( e)
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked Then
+         OnMouseDownSceneSideAngle(e)
       ElseIf DripDrillBtn.IsChecked() Then
-         OnMouseDownSceneUnderDrill( e)
+         OnMouseDownSceneUnderDrill(e)
       ElseIf FiloTopBtn.IsChecked() Then
-         OnMouseDownSceneFiloTop( e)
+         OnMouseDownSceneFiloTop(e)
       End If
    End Sub
 
@@ -530,31 +587,35 @@ Public Class ImportPageUC
                   EgtDeselectObj(nId)
                   EgtDeselectObj(nLayId)
                   Dim sLayName As String = ""
-                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo( nLayId, INFO_FILOTOP) Then
-                     EgtRemoveInfo( nLayId, INFO_FILOTOP)
-                     EgtRemoveInfo( nLayId, INFO_OFFSET)
-                     EgtRemoveInfo( nLayId, INFO_DEPTH)
-                     Dim nEntId As Integer = EgtGetFirstInGroup( nLayId)
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) Then
+                     EgtRemoveInfo(nLayId, INFO_FILOTOP)
+                     EgtRemoveInfo(nLayId, INFO_OFFSET)
+                     EgtRemoveInfo(nLayId, INFO_DEPTH)
+                     Dim nEntId As Integer = EgtGetFirstInGroup(nLayId)
                      While nEntId <> GDB_ID.NULL
                         EgtSetColor(nEntId, New Color3d(127, 63, 0))
-                        nEntId = EgtGetNext( nEntId)
+                        nEntId = EgtGetNext(nEntId)
                      End While
+                     m_DeselectListHole.Add(nLayId)
+                     m_SelListHole.Remove(nLayId)
                   End If
                Else
                   Dim nLayId As Integer = GDB_ID.NULL
                   EgtGetInfo(nId, "ID", nLayId)
                   Dim sLayName As String = ""
-                  If EgtGetName( nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
-                     EgtSelectObj( nId)
-                     EgtSelectObj( nLayId)
-                     EgtSetInfo( nLayId, INFO_FILOTOP, 1)
-                     EgtSetInfo( nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
-                     EgtSetInfo( nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
-                     Dim nEntId As Integer = EgtGetFirstInGroup( nLayId)
+                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
+                     EgtSelectObj(nId)
+                     EgtSelectObj(nLayId)
+                     EgtSetInfo(nLayId, INFO_FILOTOP, 1)
+                     EgtSetInfo(nLayId, INFO_OFFSET, m_FiloTopUC.FiloTopOffset)
+                     EgtSetInfo(nLayId, INFO_DEPTH, m_FiloTopUC.FiloTopDepth)
+                     Dim nEntId As Integer = EgtGetFirstInGroup(nLayId)
                      While nEntId <> GDB_ID.NULL
                         EgtSetColor(nEntId, New Color3d(255, 255, 255))
-                        nEntId = EgtGetNext( nEntId)
+                        nEntId = EgtGetNext(nEntId)
                      End While
+                     m_SelListHole.Add(nLayId)
+                     m_DeselectListHole.Remove(nLayId)
                   End If
                End If
                EgtDraw()
@@ -562,6 +623,12 @@ Public Class ImportPageUC
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      m_FiloTopUC.CreateFiloTopPreView(m_SelListHole)
+      m_FiloTopUC.EraseFiloTopPreview(m_DeselectListHole)
+      If m_SelListHole.Count > 0 Then
+         MessageTxBx.Text = ""
+         MessageBrd.Background = Brushes.Transparent
+      End If
    End Sub
 
    Private Sub OnShowDistanceVector(sender As Object, vtDist As Vector3d) Handles ImportScene.OnShowDistanceVector
@@ -571,11 +638,41 @@ Public Class ImportPageUC
 
    Private Sub SelectedPartChanged()
       ' Se sono in modalità inclinazioni o gocciolatoio calcolo lati inclinabili e creo testi
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked() Then
          m_SideAngleUC.ReLoadSideAnglePage()
       End If
    End Sub
 
+   ' metodo utilizzato per definire il colore dei pezzi DXF importati
+   Private Sub ColorRegion(nCtx As Integer)
+
+      ' Leggo dati corrispondenza colore
+      Dim InsertColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
+
+      ' Imposto contesto corrente
+      EgtSetCurrentContext(nCtx)
+      ' Ciclo sui pezzi
+      Dim PartId As Integer = EgtGetFirstPart()
+      While PartId <> GDB_ID.NULL
+         ' Ciclo sui layer delle regioni
+         Dim RegionId As Integer = EgtGetFirstNameInGroup(PartId, NAME_REGION)
+         While RegionId <> GDB_ID.NULL
+            EgtSetColor(RegionId, InsertColor)
+            ' Ciclo sulle regioni
+            Dim EntId As Integer = EgtGetFirstInGroup(RegionId)
+            While EntId <> GDB_ID.NULL
+               If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
+               EntId = EgtGetNext(EntId)
+            End While
+            RegionId = EgtGetNextName(PartId, NAME_REGION)
+         End While
+         ' passo al pezzo successico
+         PartId = EgtGetNextPart(PartId)
+      End While
+      ' Aggiorno scritte per angoli sui lati
+      WriteSideAngleForNest(nCtx)
+   End Sub
+
    Private Sub UseLayerBtn_Click(sender As Object, e As RoutedEventArgs) Handles UseLayerBtn.Click
       ' Creo i pezzi
       Dim nType As Integer = If(m_nFileType = FT.NGE, FPC_TYPE.NGE, FPC_TYPE.LAYER)
@@ -589,6 +686,8 @@ Public Class ImportPageUC
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, m_MainWindow.GetIniFile()) <> 0 Then
          Engrave.ColorToEngrave(ImportScene.GetCtx())
       End If
+      ' gestico il colore degli elementi da importare (devono avere una regione definita!
+      ColorRegion(ImportScene.GetCtx())
       ' Eseguo zoom
       ImportScene.ZoomAll()
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert
@@ -600,8 +699,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -619,6 +722,8 @@ Public Class ImportPageUC
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, m_MainWindow.GetIniFile()) <> 0 Then
          Engrave.ColorToEngrave(ImportScene.GetCtx())
       End If
+      ' gestico il colore degli elementi da importare (devono avere una regione definita!
+      ColorRegion(ImportScene.GetCtx())
       ' Eseguo zoom
       ImportScene.ZoomAll()
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert
@@ -630,8 +735,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -649,6 +758,8 @@ Public Class ImportPageUC
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, m_MainWindow.GetIniFile()) <> 0 Then
          Engrave.ColorToEngrave(ImportScene.GetCtx())
       End If
+      ' gestico il colore degli elementi da importare (devono avere una regione definita!
+      ColorRegion(ImportScene.GetCtx())
       ' Eseguo zoom
       ImportScene.ZoomAll()
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert
@@ -660,8 +771,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -742,19 +857,36 @@ Public Class ImportPageUC
    End Sub
 
    Private Sub OrderListBtn_Click(sender As Object, e As RoutedEventArgs) Handles OrderListBtn.Click
-      Dim DlgOrderList As New CompoCsvData( m_MainWindow)
-      DlgOrderList.SetData( m_sOrder, m_sList)
+      Dim DlgOrderList As New CompoCsvData(m_MainWindow)
+      DlgOrderList.SetData(m_sOrder, m_sList)
       If DlgOrderList.ShowDialog() Then
-         DlgOrderList.GetData( m_sOrder, m_sList)
+         DlgOrderList.GetData(m_sOrder, m_sList)
       End If
    End Sub
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
+      ' Genero l'immagine solo se è abilitata la modalità
+      If m_MainWindow.EnabledDxfPark() Then Print()
       ' Se import per pezzi piatti
       If m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut Then
          ' Eseguo importazione pezzi piatti
          LoadFlatParts()
+         ' Aggiorno la gestione dei parcheggi: spengo tutti i parcheggi tranne quello indicato
+         Dim ListParkInd As New List(Of ParkInd)
+         SelParkIndWD.LoadParkInd(ListParkInd)
+         For Each ItemParkInd As ParkInd In ListParkInd
+            If ItemParkInd.Ind = NewParkInd Then
+               ItemParkInd.Status = GDB_ST.ON_
+            Else
+               ItemParkInd.Status = GDB_ST.OFF
+            End If
+         Next
+         ' Aggiorno lo stato dei pezzi 
+         For Each Item As ParkInd In ListParkInd
+            SelParkIndWD.SetStatusPartInParkInd(Item, False)
+         Next
+
       ' altrimenti import per cornici
       Else
          LoadFrame()
@@ -765,6 +897,74 @@ Public Class ImportPageUC
       m_MainWindow.m_ActivePage = m_MainWindow.m_PrevActivePage
    End Sub
 
+   ' Creo una immagine del progetto da importare salvato nel percorso di progetto "..\(#ProjInd)_ParkInd_(#ParkInd).png"
+   Public Sub Print()
+      ' recupero la lista degli indici di parcheggio
+      NewParkInd = SelParkIndWD.NewParkInd()
+
+      Dim nProj As Integer = m_MainWindow.m_CurrentProjectPageUC.GetCurrentProject()
+      Dim sPath As String = SelParkIndWD.GetPathCurrProj() & NewParkInd.ToString & ".png"
+      ' Recupero le dimensioni dell'area di stampa
+      Dim dW As Integer = 120
+      Dim dH As Integer = 120
+
+      If Not MainWindow.m_bShowSVGParkInd Then
+         Try
+            ' Prendo l'immagine corrente per la stampa
+            Dim colBackTopColor As Color3d = GetBackTopColor()
+            Dim colBackBottomColor As Color3d = GetBackBottomColor()
+            ' Recupero le dimensioni correnti della pagina di disegno
+            Dim nImgW As Integer = m_MainWindow.m_CurrentProjectPageUC.ActualWidth()
+            Dim nImgH As Integer = m_MainWindow.m_CurrentProjectPageUC.ActualHeight()
+            If Not EgtGetImage(SM.SHADING, colBackTopColor, colBackBottomColor, nImgW, nImgH, sPath) Then
+               ' Error in creating the print image
+               EgtOutLog(EgtMsg(50181))
+               Return
+            End If
+            'Metodo complesso di stampa che permette di rilasciare il file :
+            'carico la bitmap e la metto in uno stream in memoria
+            Dim stream As System.IO.Stream = New System.IO.MemoryStream()
+            Dim bitmap As System.Drawing.Bitmap = New System.Drawing.Bitmap(sPath)
+            bitmap.Save(stream, System.Drawing.Imaging.ImageFormat.Png)
+            bitmap.Dispose()
+            ' la sposto in una BitmapImage
+            Dim bitImage As New System.Windows.Media.Imaging.BitmapImage()
+            bitImage.BeginInit()
+            bitImage.StreamSource = stream
+            bitImage.EndInit()
+            ' la sposto in un Visual Control
+            Dim tmpImg As New Image
+            tmpImg.BeginInit()
+            tmpImg.Source = bitImage
+            tmpImg.Stretch = Stretch.Uniform
+            tmpImg.EndInit()
+         Catch
+            ' Error in executing print
+            EgtOutLog(EgtMsg(50182))
+         End Try
+      Else
+         ' Assegno dei nomi ai pezzi (Da controllare bene se funzione sempre)...riassegno i nomi dopo?
+         Dim nIdPart As Integer = EgtGetFirstPart()
+         Dim nIndex As Integer = 0
+         While nIdPart <> GDB_ID.NULL
+            ' recupero il primo layer del part 
+            Dim nIdLay As Integer = EgtGetFirstLayer(nIdPart)
+            While nIdLay <> GDB_ID.NULL
+               Dim nIdEnt As Integer = EgtGetFirstInGroup(nIdLay)
+               While nIdEnt <> GDB_ID.NULL
+                  EgtSetName(nIdEnt, nIndex.ToString)
+                  nIdEnt = EgtGetNext(nIdEnt)
+                  nIndex = nIndex + 1
+               End While
+               nIdLay = EgtGetNextLayer(nIdLay)
+            End While
+            nIdPart = EgtGetNextPart(nIdPart)
+         End While
+         EgtExportSvg(GDB_ID.ROOT, SelParkIndWD.GetPathCurrProj() & NewParkInd.ToString & ".svg")
+      End If
+
+   End Sub
+
    Private Sub LoadFlatParts()
       ' Cancello regioni di selezione dai pezzi
       Dim PartId As Integer = EgtGetFirstPart()
@@ -772,6 +972,10 @@ Public Class ImportPageUC
          EgtErase(EgtGetFirstNameInGroup(PartId, SELECT_REGION_LAYER))
          PartId = EgtGetNextPart(PartId)
       End While
+
+      ' identificativo univoico del gruppo di pezzi, se più di un "Repeat"
+      Dim sGUICode As New List(Of String)
+
       ' Scrivo testi per nesting
       SideAngle.WriteSideAngleForNest(ImportScene.GetCtx())
       ' Imposto riferimento sul centro geometrico di ogni pezzo
@@ -781,45 +985,90 @@ Public Class ImportPageUC
       ' Salvo tutti i pezzi in un file temporaneo
       Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\FlatPart" & ".Nge"
       If Not EgtSaveFile(sTmpFile, NGE.BIN) Then Return
+
+      ' Determino numero ripetizioni
+      Dim nRepeat = 1
+      StringToInt(PartNumTxBx.Text, nRepeat)
+      nRepeat = Math.Min(Math.Max(1, nRepeat), 50)
+      ' creo il riferimento
+      If nRepeat > 1 Then
+         ' per ogni pezze del file DXF creo un gruppo
+         Dim nIdTemp As Integer = EgtGetFirstPart()
+         While nIdTemp <> GDB_ID.NULL
+            Dim sPreGuid As String = CreatePreGuidCode(nIdTemp)
+            sGUICode.Add(sPreGuid & System.Guid.NewGuid.ToString)
+            nIdTemp = EgtGetNextPart(nIdTemp)
+         End While
+      End If
+
       ' Passo al contesto principale
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Recupero flag per inserimento diretto in grezzo (altrimenti in parcheggio)
       Dim bDirect As Boolean = (GetPrivateProfileInt(S_NEST, K_DIRECT, 0, m_MainWindow.GetIniFile()) <> 0)
       ' Elimino eventuali precedenti pezzi vuoti
       EgtEraseEmptyParts()
-      ' Determino numero ripetizioni
-      Dim nRepeat = 1
-      StringToInt(PartNumTxBx.Text, nRepeat)
-      nRepeat = Math.Min(Math.Max(1, nRepeat), 50)
+
       ' Inserisco i pezzi nell'ambiente principale e recupero Id primo pezzo inserito
       Dim nFirstId As Integer = EgtGetLastPart()
       For nInd As Integer = 1 To nRepeat
          Dim nFirst2Id As Integer = EgtGetLastPart()
          EgtInsertFile(sTmpFile)
+
+         Dim FirstOfImport As Integer = EgtGetNextPart(nFirst2Id)
+         If FirstOfImport = GDB_ID.NULL Then FirstOfImport = EgtGetFirstPart()
+         Dim Index As Integer = 1
+         While FirstOfImport <> GDB_ID.NULL And Index <= sGUICode.Count
+            If Not String.IsNullOrEmpty(sGUICode(Index - 1)) Then
+               EgtSetInfo(FirstOfImport, INFO_REFGROUP, sGUICode(Index - 1))
+               Index += 1
+            Else
+               Exit While
+            End If
+            FirstOfImport = EgtGetNextPart(FirstOfImport)
+         End While
+
          nFirst2Id = If(nFirst2Id <> GDB_ID.NULL, EgtGetNextPart(nFirst2Id), EgtGetFirstPart())
          ' Eventuale inserimento pezzi in VeinMatching
          VeinMatching.AddParts(sTmpFile, nFirst2Id)
       Next
       nFirstId = If(nFirstId <> GDB_ID.NULL, EgtGetNextPart(nFirstId), EgtGetFirstPart())
+
       ' Cancello il file
       If My.Computer.FileSystem.FileExists(sTmpFile) Then
          My.Computer.FileSystem.DeleteFile(sTmpFile)
       End If
+
       ' Calcolo l'area dei pezzi inseriti
       Dim dNewArea As Double = 0
       Dim nId As Integer = nFirstId
       While nId <> GDB_ID.NULL
-         dNewArea += GeomCalc.GetPartArea( nId)
+         ' Definisco l'indice di parcheggio assegnato al pezzo
+         If m_MainWindow.EnabledDxfPark() Then
+            EgtSetInfo(nId, INFO_PARKIND, NewParkInd.ToString)
+            ' Imposto lo stato
+            EgtSetStatus(nId, GDB_ST.ON_)
+            ' Salvo lo stato (per gestire la navigazione)
+            EgtSetInfo(nId, INFO_PARKSTATUS, GDB_ST.ON_)
+         End If
+         dNewArea += GeomCalc.GetPartArea(nId)
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
       ' Nascondo tutti i pezzi inseriti (per evitare interferenze con pezzi in fase di parcheggio)
       nId = nFirstId
+      Dim GlobBBox As New BBox3d
       While nId <> GDB_ID.NULL
+         Dim bboxTemp As New BBox3d
+         EgtGetBBox(nId, 0, bboxTemp)
+         GlobBBox.Add(bboxTemp)
          EgtSetStatus(nId, GDB_ST.OFF)
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
+      Dim DimX As Double = GlobBBox.DimX
+      Dim DimY As Double = GlobBBox.DimY
+      Dim BBoxMaxPt As Point3d = GlobBBox.Max
+
       ' Ciclo sui pezzi inseriti
       nId = nFirstId
       While nId <> GDB_ID.NULL
@@ -832,30 +1081,35 @@ Public Class ImportPageUC
          If m_nFileType = FT.DXF Or m_nFileType = FT.NGE Then
             ' Eventuale testo per indicare il sopra
             If TopBtn.IsChecked() Then
-               Utility.AddTopToPartRegion( nRegId)
+               Utility.AddTopToPartRegion(nRegId)
             End If
             ' Se richiesti, inserisco dati Ordine, Distinta, Nome, Origine
             If m_bEnableOrderList Then
                ' Cerco il nome del pezzo
                Dim sName As String = ""
-               EgtGetName( nId, sName)
+               EgtGetName(nId, sName)
                ' Recupero il box del pezzo
-               Dim b3Reg As New BBox3d : EgtGetBBox( nRegId, GDB_BB.IGNORE_TEXT + GDB_BB.IGNORE_DIM, b3Reg)
+               Dim b3Reg As New BBox3d : EgtGetBBox(nRegId, GDB_BB.IGNORE_TEXT + GDB_BB.IGNORE_DIM, b3Reg)
                ' Aggiungo info equivalenti a CSV
                EgtSetInfo(nId, INFO_CSV_PART, sName)
                EgtSetInfo(nId, INFO_CSV_ORD, m_sOrder)
                EgtSetInfo(nId, INFO_CSV_DIST, m_sList)
                EgtSetInfo(nId, INFO_CSV_MAT, m_MainWindow.m_CurrentMachine.CurrMat.sName)
-               EgtSetInfo(nId, INFO_CSV_V1, DoubleToString( b3Reg.DimX(), 1))
-               EgtSetInfo(nId, INFO_CSV_V2, DoubleToString( b3Reg.DimY(), 1))
+               EgtSetInfo(nId, INFO_CSV_V1, DoubleToString(b3Reg.DimX(), 1))
+               EgtSetInfo(nId, INFO_CSV_V2, DoubleToString(b3Reg.DimY(), 1))
             End If
          End If
          ' Imposto colore testi
-         Utility.SetTextColor( nRegId)
+         Utility.SetTextColor(nRegId)
          ' Imposto path di provenienza
          EgtSetInfo(nId, INFO_SOU_PATH, IO.Path.Combine(m_sCurrDir, m_sCurrFile))
          ' Inserisco in parcheggio
-         m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId, True)
+         If m_MainWindow.EnabledDxfPark() Then
+            ' Mantengo la posizione relativa tra i pezzi
+            m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePartDXF(nId, DimX, DimY, BBoxMaxPt)
+         Else
+            m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId, True)
+         End If
          ' Recupero Id di pezzo successivo
          Dim nNextId As Integer = EgtGetNextPart(nId)
          ' Se richiesto posizionamento diretto, lo eseguo
@@ -871,7 +1125,7 @@ Public Class ImportPageUC
       ' Eventuale aggiornamento VeinMatching
       VeinMatching.ZoomAll()
       ' Aggiorno Aree totale e da lavorare dei pezzi
-      m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea( dNewArea)
+      m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea(dNewArea)
       m_MainWindow.m_CurrentProjectPageUC.UpdateToProduceArea()
       m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
       ' Aggiorno ambiente principale
@@ -912,22 +1166,24 @@ Public Class ImportPageUC
       ' Salvo direttorio corrente
       WritePrivateProfileString(S_FLATPARTS, K_FLPCURRDIR, m_sCurrDir, m_MainWindow.GetIniFile())
       ' Tolgo pagina inclinazioni/gocciolatoi se attiva
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_SideAngleUC)
          If SideAngleBtn.IsChecked() Then
             SideAngleBtn.IsChecked = False
+         ElseIf EngraveBtn.IsChecked() Then
+            EngraveBtn.IsChecked = False
          Else
             DripCutBtn.IsChecked() = False
          End If
-      ' Tolgo pagina fori da sotto se attiva
+         ' Tolgo pagina fori da sotto se attiva
       ElseIf DripDrillBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_UnderDrillUC)
          DripDrillBtn.IsChecked() = False
-      ' Tolgo pagina Filo Top se attiva
+         ' Tolgo pagina Filo Top se attiva
       ElseIf FiloTopBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
@@ -941,6 +1197,7 @@ Public Class ImportPageUC
 
    Private Sub SideAngleBtn_Click(sender As Object, e As RoutedEventArgs) Handles SideAngleBtn.Click
       If SideAngleBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni per percorsi interni
          AdjustSelectRegions()
          ' Dichiaro nessuna selezione
@@ -953,7 +1210,11 @@ Public Class ImportPageUC
          FileListBox.Visibility = Windows.Visibility.Hidden
          ' Disabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
          FiloTopBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -963,6 +1224,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -974,8 +1236,72 @@ Public Class ImportPageUC
          EgtDeselectAll()
          ' Riabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
+         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
+         mmBtn.IsEnabled = True
+         inchBtn.IsEnabled = True
+         ' Elimino scritte angoli per input e inserisco quelle definitive
+         SideAngle.WriteSideAngleForNest(ImportScene.GetCtx())
+         ' Riabilito bottone reset
+         ResetBtn.IsEnabled = True
+         ' Pulisco area messaggi
+         MessageTxBx.Text = ""
+         MessageBrd.Background = Brushes.Transparent
+      End If
+      EgtZoom(ZM.ALL)
+   End Sub
+
+   Private Sub EngraveBtn_Click(sender As Object, e As RoutedEventArgs) Handles EngraveBtn.Click
+      If EngraveBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
+         ' Aggiungo regioni per percorsi interni
+         AdjustSelectRegions()
+         ' Dichiaro nessuna selezione
+         m_nSelectedPart = GDB_ID.NULL
+         m_nSelectedLayer = GDB_ID.NULL
+         ' Imposto modalità sideangle
+         m_SideAngleUC.m_Mode = SideAngleUC.ModeOpt.ENGRAVE
+         LeftGrid.Children.Add(m_SideAngleUC)
+         FilePathTxBl.Visibility = Windows.Visibility.Hidden
+         FileListBox.Visibility = Windows.Visibility.Hidden
+         ' Disabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
+         SideAngleBtn.IsEnabled = False
+         FiloTopBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         End If
+         DripDrillBtn.IsEnabled = False
+         mmBtn.IsEnabled = False
+         inchBtn.IsEnabled = False
+         ' Disabilito bottone reset
+         ResetBtn.IsEnabled = False
+         ' Messaggio di selezione da effettuare
+         MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+         MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
+      Else
+         FinderGrd.Visibility = Visibility.Visible
+         ' Rimuovo regioni per percorsi interni
+         RemoveSelectRegions()
+         FilePathTxBl.Visibility = Windows.Visibility.Visible
+         FileListBox.Visibility = Windows.Visibility.Visible
+         LeftGrid.Children.Remove(m_SideAngleUC)
+         ' Deseleziono eventuali pezzi rimasti selezionati
+         m_nSelectedPart = GDB_ID.NULL
+         m_nSelectedLayer = GDB_ID.NULL
+         EgtDeselectAll()
+         ' Riabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
+         FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
+         SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         End If
          DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                   Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
          mmBtn.IsEnabled = True
@@ -993,6 +1319,7 @@ Public Class ImportPageUC
 
    Private Sub DripCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles DripCutBtn.Click
       If DripCutBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Dichiaro nessuna selezione
          m_nSelectedPart = GDB_ID.NULL
          m_nSelectedLayer = GDB_ID.NULL
@@ -1004,6 +1331,9 @@ Public Class ImportPageUC
          ' Disabilito SideAngleBtn,FiloTop,  DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = False
          FiloTopBtn.IsEnabled = False
+         If DripCutBtn.Visibility <> Visibility.Visible Then
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1013,6 +1343,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_SideAngleUC)
@@ -1023,8 +1354,9 @@ Public Class ImportPageUC
          ' Riabilito SideAngleBtn, FiloTop, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
-                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
+         If DripCutBtn.Visibility <> Visibility.Visible Then
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          mmBtn.IsEnabled = True
          inchBtn.IsEnabled = True
          ' Elimino scritte angoli per input e inserisco quelle definitive
@@ -1043,6 +1375,7 @@ Public Class ImportPageUC
 
    Private Sub DripDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles DripDrillBtn.Click
       If DripDrillBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni di selezione per percorsi interni
          AdjustSelectRegions()
          ' Imposto modalità fori da sotto
@@ -1052,7 +1385,11 @@ Public Class ImportPageUC
          ' Disabilito SideAngleBtn, FiloTop, DripCutBtn e unità di misura
          SideAngleBtn.IsEnabled = False
          FiloTopBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
          ' Disabilito bottone reset
@@ -1061,6 +1398,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 15)   ' Selezionare uno o più fori
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1073,8 +1411,12 @@ Public Class ImportPageUC
          ' Riabilito SideAngleBtn, FiloTop, DripCutBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          mmBtn.IsEnabled = True
          inchBtn.IsEnabled = True
          ' Riabilito bottone reset
@@ -1088,6 +1430,7 @@ Public Class ImportPageUC
 
    Private Sub FiloTopBtn_Click(sender As Object, e As RoutedEventArgs) Handles FiloTopBtn.Click
       If FiloTopBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
          ' Aggiungo regioni per percorsi interni
          AdjustSelectRegions()
          ' Dichiaro nessuna selezione
@@ -1099,7 +1442,11 @@ Public Class ImportPageUC
          FileListBox.Visibility = Windows.Visibility.Hidden
          ' Disabilito SideAngleBtn, DripCutBtn, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1109,6 +1456,7 @@ Public Class ImportPageUC
          MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno interno
          MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
       Else
+         FinderGrd.Visibility = Visibility.Visible
          ' Rimuovo regioni per percorsi interni
          RemoveSelectRegions()
          FilePathTxBl.Visibility = Windows.Visibility.Visible
@@ -1120,8 +1468,12 @@ Public Class ImportPageUC
          EgtDeselectAll()
          ' Riabilito SideAngleBtn, DripCutBtn, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                   Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
          mmBtn.IsEnabled = True
@@ -1180,8 +1532,9 @@ Public Class ImportPageUC
                If nType = GDB_TY.CRV_LINE Or nType = GDB_TY.CRV_ARC Or nType = GDB_TY.CRV_COMPO Then
                   vCrvId.Add(nCrvId)
                End If
-            ElseIf DripDrillBtn.IsChecked
-               if nType = GDB_TY.CRV_ARC
+            ElseIf DripDrillBtn.IsChecked Then
+
+               If nType = GDB_TY.CRV_ARC Then
                   vCrvId.Add(nCrvId)
                End If
             End If
@@ -1207,11 +1560,11 @@ Public Class ImportPageUC
 
    Private Sub Cad2dBtn_Click(sender As Object, e As RoutedEventArgs) Handles Cad2dBtn.Click
 
-      Dim ProcsCad2d As Process() = Process.GetProcessesByName( m_sCad2dName)
+      Dim ProcsCad2d As Process() = Process.GetProcessesByName(m_sCad2dName)
       If ProcsCad2d.Length() > 0 Then
-         ShowWindow( ProcsCad2d(0).MainWindowHandle, 3)
+         ShowWindow(ProcsCad2d(0).MainWindowHandle, 3)
       Else
-         Process.Start( m_sCad2dPath)
+         Process.Start(m_sCad2dPath)
       End If
 
    End Sub
@@ -1220,42 +1573,42 @@ End Class
 
 Public Class IconListBoxItem
 
-    Private m_iPictureID As Integer
-    Private m_sName As String
+   Private m_iPictureID As Integer
+   Private m_sName As String
 
-    Public Property PictureID() As Integer
-        Get
-            Return m_iPictureID
-        End Get
-        Set(value As Integer)
-            m_iPictureID = value
-        End Set
-    End Property
+   Public Property PictureID() As Integer
+      Get
+         Return m_iPictureID
+      End Get
+      Set(value As Integer)
+         m_iPictureID = value
+      End Set
+   End Property
 
-    Public Property Name() As String
-        Get
-            Return m_sName
-        End Get
-        Set(value As String)
-            m_sName = value
-        End Set
-    End Property
+   Public Property Name() As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+      End Set
+   End Property
 
-    Public ReadOnly Property PictureString() As String
-        Get
-            Return "/Resources/ImportPageListBoxImages/" + PictureID.ToString() + ".png"
-        End Get
-    End Property
+   Public ReadOnly Property PictureString() As String
+      Get
+         Return "/Resources/ImportPageListBoxImages/" + PictureID.ToString() + ".png"
+      End Get
+   End Property
 
-    Sub New()
-        Me.Name = String.Empty
-        Me.PictureID = 0
-    End Sub
+   Sub New()
+      Me.Name = String.Empty
+      Me.PictureID = 0
+   End Sub
 
-    Sub New(Name As String, PictureID As Integer)
-        Me.Name = Name
-        Me.PictureID = PictureID
-    End Sub
+   Sub New(Name As String, PictureID As Integer)
+      Me.Name = Name
+      Me.PictureID = PictureID
+   End Sub
 
 
 End Class

DrawImport/InternalComponentPageUC.xaml

@@ -1,10 +1,10 @@
 <UserControl x:Class="InternalComponentPageUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="768" d:DesignWidth="256">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="768" d:DesignWidth="256">
 
    <!-- Definizione della MainComponentPage -->
    <Grid Name="MainComponentPageGrid" Background="{DynamicResource OmagCut_Gray}">
@@ -30,7 +30,7 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo1" Grid.Column="0" />
             <TextBlock Name="LabelCompo1" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
@@ -42,11 +42,11 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo2" Grid.Column="0" />
             <TextBlock Name="LabelCompo2" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo3" Grid.Row="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo3" Grid.Row="2" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="80"/>
@@ -54,11 +54,11 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo3" Grid.Column="0" />
             <TextBlock Name="LabelCompo3" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo4" Grid.Row="3" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo4" Grid.Row="3" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="80"/>
@@ -66,11 +66,11 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo4" Grid.Column="0" />
             <TextBlock Name="LabelCompo4" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo5" Grid.Row="4" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo5" Grid.Row="4" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="80"/>
@@ -78,11 +78,11 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo5" Grid.Column="0" />
             <TextBlock Name="LabelCompo5" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo6" Grid.Row="5" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo6" Grid.Row="5" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="80"/>
@@ -90,11 +90,11 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo6" Grid.Column="0" />
             <TextBlock Name="LabelCompo6" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo7" Grid.Row="6" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo7" Grid.Row="6" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="80"/>
@@ -102,11 +102,11 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo7" Grid.Column="0" />
             <TextBlock Name="LabelCompo7" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo8" Grid.Row="7" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo8" Grid.Row="7" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="80"/>
@@ -114,29 +114,30 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo8" Grid.Column="0" />
             <TextBlock Name="LabelCompo8" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo9" Grid.Row="8" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-            <Grid>
-                <Image Name="ImageCompo9" Source="{DynamicResource NumericKeyboardArrowImg}" />
-                <!--"/Resources/NumericKeyboardArrow.png"/>-->
-                <TextBlock Name="LabelCompo9" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            </Grid>
-        </Button>
+      <Button Name="Compo9" Grid.Row="8" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+         <Grid>
+            <Image Name="ImageCompo9" Source="{DynamicResource NumericKeyboardArrowImg}" />
+            <!--"/Resources/NumericKeyboardArrow.png"/>-->
+            <TextBlock Name="LabelCompo9"
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+         </Grid>
+      </Button>
 
-        <Grid Grid.Row="9">
-            <Grid.ColumnDefinitions>
-                <ColumnDefinition Width="1*"/>
-                <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+      <Grid Grid.Row="9">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+         </Grid.ColumnDefinitions>
 
-            <Button Name="BackBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-          
-        </Grid>
+         <Button Name="BackBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+         </Button>
+
+      </Grid>
 
    </Grid>
 

DrawImport/InternalComponentPageUC.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.IO
+Imports EgtUILib
 
 Public Class InternalComponentPageUC
 
@@ -20,11 +21,11 @@ Public Class InternalComponentPageUC
       ' bottone per selezionare la seconda pagina di componenti interni
       Compo9.SetValue(Grid.ColumnProperty, 0)
       Compo9.SetValue(Grid.ColumnSpanProperty, 2)
-      LabelCompo9.Text = EgtMsg(MSG_COMPONENTPAGEUC + 9)                           ' Altri
+      LabelCompo9.Text = EgtMsg(90409)                           ' Altri
       ImageCompo9.Visibility = Windows.Visibility.Hidden
       LabelCompo9.Visibility = Windows.Visibility.Visible
       ' Se i componenti interni sono più di 8 viene visualizzato il bottone "Altri" altrimenti no
-      Dim nCount As Integer = GetPrivateProfileInt("InternalCompo", "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(S_INTCOMPO, K_INT_COUNT, 0, m_MainWindow.GetIniFile())
       If nCount > 8 Then
          Compo9.Visibility = Windows.Visibility.Visible
       Else
@@ -163,10 +164,10 @@ Public Class InternalComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = e.Source
-      Dim CompoName As String = "InternalCompo" & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = S_INTCOMPO & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       ' m_SecondaryComponentPage.m_sCurrCompo = String.Empty
-      Dim nCount As Integer = GetPrivateProfileInt(CompoName, "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       If nCount > 1 Then
          m_MainWindow.m_DrawPageUC.LeftButtonGrd.Children.Remove(Me)
          m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.SecondaryComponent
@@ -252,7 +253,7 @@ Public Class InternalComponentPageUC
    Private Sub LoadPage()
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
-      Dim nCompoNumber As Integer = GetPrivateProfileInt("InternalCompo", "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_INTCOMPO, K_INT_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)
@@ -286,12 +287,22 @@ Public Class InternalComponentPageUC
          If sCompoImage.Length <> 0 Then
             Try
                Dim sPath As String = m_MainWindow.GetResourcesDir() & "\" & sCompoImage
-               sCompoImageSource = ImageConverter.ConvertFromString(sPath)
-               GetImage(index).Height = 65
-               GetImage(index).Width = 65
-               GetImage(index).Source = sCompoImageSource
-               GetLabel(index).SetValue(Grid.ColumnProperty, 1)
-               GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               If File.Exists(sPath) Then
+                  sCompoImageSource = ImageConverter.ConvertFromString(sPath)
+                  GetImage(index).Height = 65
+                  GetImage(index).Width = 65
+                  GetImage(index).Source = sCompoImageSource
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 1)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               Else
+                  sCompoImage = String.Empty
+                  GetImage(index).Height = 0
+                  GetImage(index).Width = 0
+                  CustomThickness.Right = 0
+                  GetImage(index).Margin = CustomThickness
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 0)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 2)
+               End If
             Catch ex As Exception
                EgtOutLog("Error loading image " & sCompoImage)
                sCompoImage = String.Empty

DrawImport/MainComponentPageUC.xaml

@@ -1,11 +1,11 @@
 <UserControl x:Class="MainComponentPageUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="768" d:DesignWidth="256">
-      
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="768" d:DesignWidth="256">
+
    <!-- Definizione della MainComponentPage -->
    <Grid Name="MainComponentPageGrid">
       <Grid.RowDefinitions>
@@ -20,9 +20,9 @@
          <RowDefinition Height="1*"/>
          <RowDefinition Height="1*"/>
       </Grid.RowDefinitions>
-      
+
       <!-- Attenzione! Questi Button devono avere lo stesso nome dei componenti nel file Ini -->
-        <Button Name="Compo1" Grid.Row="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo1" Grid.Row="0" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="80"/>
@@ -30,11 +30,11 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo1" Grid.Column="0" />
             <TextBlock Name="LabelCompo1" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo2" Grid.Row="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo2" Grid.Row="1" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="80"/>
@@ -42,11 +42,11 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo2" Grid.Column="0" />
             <TextBlock Name="LabelCompo2" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo3" Grid.Row="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo3" Grid.Row="2" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="80"/>
@@ -54,23 +54,23 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo3" Grid.Column="0" />
             <TextBlock Name="LabelCompo3" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo4" Grid.Row="3" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo4" Grid.Row="3" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
-                <ColumnDefinition Width="80"/>
-                <ColumnDefinition Width="140"/>
+               <ColumnDefinition Width="80"/>
+               <ColumnDefinition Width="140"/>
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo4" Grid.Column="0" />
             <TextBlock Name="LabelCompo4" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo5" Grid.Row="4" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo5" Grid.Row="4" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="80"/>
@@ -78,11 +78,11 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo5" Grid.Column="0" />
             <TextBlock Name="LabelCompo5" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo6" Grid.Row="5" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo6" Grid.Row="5" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="80"/>
@@ -90,11 +90,11 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo6" Grid.Column="0" />
             <TextBlock Name="LabelCompo6" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo7" Grid.Row="6" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo7" Grid.Row="6" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="80"/>
@@ -102,11 +102,11 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo7" Grid.Column="0" />
             <TextBlock Name="LabelCompo7" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
-        <Button Name="Compo8" Grid.Row="7" Style="{DynamicResource OmagCut_YellowIconButton}">
+      <Button Name="Compo8" Grid.Row="7" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="80"/>
@@ -114,7 +114,7 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo8" Grid.Column="0" />
             <TextBlock Name="LabelCompo8" Grid.Column="1"
-               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
@@ -123,15 +123,16 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
-            <Button Name="Compo9" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+         <Button Name="Compo9" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}">
             <Grid>
-                    <Image Name="ImageCompo9" Source="{DynamicResource NumericKeyboardArrowImg}" />
-                    <!--Source="/Resources/NumericKeyboardArrow.png"/>-->
-               <TextBlock Name="LabelCompo9" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+               <Image Name="ImageCompo9" Source="{DynamicResource NumericKeyboardArrowImg}" />
+               <!--Source="/Resources/NumericKeyboardArrow.png"/>-->
+               <TextBlock Name="LabelCompo9" 
+                          Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
             </Grid>
          </Button>
       </Grid>
-      
+
    </Grid>
-   
+
 </UserControl>

DrawImport/MainComponentPageUC.xaml.vb

@@ -25,7 +25,7 @@ Public Class MainComponentPageUC
       m_SecondaryComponentPage.SetValue(Grid.RowSpanProperty, 4)
 
       ' Leggo messaggi da file ini
-      LabelCompo9.Text = EgtMsg(MSG_COMPONENTPAGEUC + 9)
+      LabelCompo9.Text = EgtMsg(90409)    ' Altri
 
    End Sub
 
@@ -33,14 +33,31 @@ Public Class MainComponentPageUC
       m_bIsFirstPage = True
       LoadPage()
       CurrentBtn = Nothing
-      Compo9.SetValue(Grid.ColumnProperty, 0)
-      Compo9.SetValue(Grid.ColumnSpanProperty, 2)
-      ImageCompo9.Visibility = Windows.Visibility.Hidden
-      LabelCompo9.Visibility = Windows.Visibility.Visible
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         ' se il numero delle componenti è superiore a 8 allora inserisco la seconda pagina
+         If GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile()) > 8 Then
+            OthersBackGr.Visibility = Visibility.Visible
+            Compo9.SetValue(Grid.ColumnProperty, 0)
+            Compo9.SetValue(Grid.ColumnSpanProperty, 2)
+            ImageCompo9.Visibility = Windows.Visibility.Hidden
+            LabelCompo9.Visibility = Windows.Visibility.Visible
+         Else
+            OthersBackGr.Visibility = Visibility.Hidden
+         End If
+      Else
+         OthersBackGr.Visibility = Visibility.Visible
+         Compo9.SetValue(Grid.ColumnProperty, 0)
+         Compo9.SetValue(Grid.ColumnSpanProperty, 2)
+         ImageCompo9.Visibility = Windows.Visibility.Hidden
+         LabelCompo9.Visibility = Windows.Visibility.Visible
+      End If
+
+
       m_MainWindow.m_DrawPageUC.SideAngleBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.m_bBackFromInternalCompo = False
    End Sub
 
    Private Function GetButton(ByVal nInd As Integer) As Button
@@ -167,10 +184,10 @@ Public Class MainComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = DirectCast(e.Source, Button)
-      Dim CompoName As String = "Compo" & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = If(m_MainWindow.FrameCutBtn.IsChecked, S_FRAMECOMPO, S_COMPO) & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       m_SecondaryComponentPage.m_sCurrCompo = String.Empty
-      Dim nCount As Integer = GetPrivateProfileInt(CompoName, "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       If nCount > 1 Then
          m_MainWindow.m_DrawPageUC.LeftButtonGrd.Children.Remove(Me)
          m_MainWindow.m_DrawPageUC.m_ActiveComponentPage = DrawPageUC.Pages.SecondaryComponent
@@ -251,13 +268,18 @@ Public Class MainComponentPageUC
    End Sub
 
    Private Sub LoadPage()
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         LoadFramePage()
+         Return
+      End If
+
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
-      Dim nCompoNumber As Integer = GetPrivateProfileInt("Compo", "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_COMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)
-      nDeltaSecondPage = 0
+         nDeltaSecondPage = 0
       Else
          ClearButton(nCompoNumber)
          nDeltaSecondPage = 8
@@ -297,7 +319,82 @@ Public Class MainComponentPageUC
 
          'verifico presenza testo
          If nCompoName > 0 Then
-            Dim sCompoName As String = EgtMsg(MSG_COMPONENTPAGEUC + nCompoName)
+            Dim sCompoName As String = EgtMsg(90400 + nCompoName)
+            'verifico presenza immagine
+            If sCompoImage.Length > 0 Then
+               'se la lunghezza del testo è maggiore di 15 lo taglio
+               If sCompoName.Length > 15 Then
+                  sCompoName = sCompoName.Substring(0, 15)
+               End If
+               GetLabel(index).Text = sCompoName
+               'Se ci sono sia testo che immagine imposto un margine di 10
+               CustomThickness.Right = 10
+               GetImage(index).Margin = CustomThickness
+            Else
+               'se l'immagine non c'è e il testo è maggiore di 20 lo taglio
+               If sCompoName.Length > 20 Then
+                  sCompoName = sCompoName.Substring(0, 20)
+               End If
+               GetLabel(index).Text = sCompoName
+            End If
+         Else
+            'Se non c'è testo azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+      Next
+
+   End Sub
+
+   Private Sub LoadFramePage()
+      Dim nDeltaSecondPage As Integer = 8
+      ' Leggo numero di componenti presenti
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
+      ' Calcolo indici a seconda della pagina in cui sono
+      If m_bIsFirstPage Then
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 0
+      Else
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 8
+      End If
+
+      ' Creazione converter da String a ImageSource
+      Dim ImageConverter As New ImageSourceConverter
+      Dim ThicknessConverter As New ThicknessConverter
+
+      'Assegnazione immagine e testo ai Button
+      For index As Integer = 1 To 8
+         Dim CustomThickness As New Thickness(0)
+         Dim nCompoName As Integer = GetPrivateProfileInt(S_FRAMECOMPO & index + nDeltaSecondPage, "Name", 0, m_MainWindow.GetIniFile())
+         Dim sCompoImage As String = ""
+         Dim sCompoImageSource As ImageSource
+
+         'verifico presenza immagine e la aggiungo
+         If GetPrivateProfileString(S_FRAMECOMPO & index + nDeltaSecondPage, "Image", "", sCompoImage, m_MainWindow.GetIniFile()) <> 0 Then
+            Try
+               sCompoImageSource = ImageConverter.ConvertFromString(m_MainWindow.GetResourcesDir() & "\" & sCompoImage)
+               GetImage(index).Height = 65
+               GetImage(index).Width = 65
+               GetImage(index).Source = sCompoImageSource
+            Catch ex As Exception
+               EgtOutLog("Error loading image " & sCompoImage)
+               sCompoImage = String.Empty
+               GetImage(index).Height = 0
+               GetImage(index).Width = 0
+               CustomThickness.Right = 0
+               GetImage(index).Margin = CustomThickness
+            End Try
+         Else
+            'Se non c'è l'immagine azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+         'verifico presenza testo
+         If nCompoName > 0 Then
+            Dim sCompoName As String = EgtMsg(90400 + nCompoName)
             'verifico presenza immagine
             If sCompoImage.Length > 0 Then
                'se la lunghezza del testo è maggiore di 15 lo taglio
@@ -330,11 +427,6 @@ Public Class MainComponentPageUC
       If m_bIsFirstPage Then
          m_bIsFirstPage = False
          LoadPage()
-         'Compo9.SetValue(Grid.ColumnProperty, 1)
-         'Compo9.SetValue(Grid.ColumnSpanProperty, 1)
-         'ImageCompo9.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NumericKeyboardArrow.png", UriKind.Relative))
-         'ImageCompo9.Visibility = Windows.Visibility.Visible
-         'LabelCompo9.Visibility = Windows.Visibility.Hidden
          Compo9.SetValue(Grid.ColumnProperty, 0)
          Compo9.SetValue(Grid.ColumnSpanProperty, 2)
          ImageCompo9.Visibility = Windows.Visibility.Hidden

DrawImport/SecondaryComponentPageUC.xaml

@@ -1,11 +1,11 @@
 <UserControl x:Class="SecondaryComponentPageUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="768" d:DesignWidth="256" Loaded="SecondaryComponentPage_Loaded">
-      
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="768" d:DesignWidth="256" Loaded="SecondaryComponentPage_Loaded">
+
    <!-- Definizione della SecondaryComponentPage -->
    <Grid Name="SecondaryComponentPageGrid">
       <Grid.RowDefinitions>
@@ -20,7 +20,7 @@
          <RowDefinition Height="1*"/>
          <RowDefinition Height="1*"/>
       </Grid.RowDefinitions>
-      
+
       <!-- Attenzione! Questi Button devono avere lo stesso nome dei componenti nel file Ini -->
       <Button Name="Compo1" Grid.Row="0" Style="{DynamicResource OmagCut_YellowIconButton}">
          <Grid>
@@ -30,7 +30,7 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo1" Grid.Column="0" />
             <TextBlock Name="LabelCompo1" Grid.Column="1"
-               Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
@@ -43,7 +43,7 @@
 
             <Image Name="ImageCompo2" Grid.Column="0" />
             <TextBlock Name="LabelCompo2" Grid.Column="1"
-               Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
@@ -55,7 +55,7 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo3" Grid.Column="0" />
             <TextBlock Name="LabelCompo3" Grid.Column="1"
-               Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
@@ -67,7 +67,7 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo4" Grid.Column="0" />
             <TextBlock Name="LabelCompo4" Grid.Column="1"
-               Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
@@ -79,7 +79,7 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo5" Grid.Column="0" />
             <TextBlock Name="LabelCompo5" Grid.Column="1"
-               Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
@@ -91,7 +91,7 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo6" Grid.Column="0" />
             <TextBlock Name="LabelCompo6" Grid.Column="1"
-               Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
@@ -103,7 +103,7 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo7" Grid.Column="0" />
             <TextBlock Name="LabelCompo7" Grid.Column="1"
-               Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
@@ -115,7 +115,7 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo8" Grid.Column="0" />
             <TextBlock Name="LabelCompo8" Grid.Column="1"
-               Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
 
@@ -127,10 +127,10 @@
             </Grid.ColumnDefinitions>
             <Image Name="ImageCompo9" Grid.Column="0" />
             <TextBlock Name="LabelCompo9" Grid.Column="1"
-               Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                       Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
          </Grid>
       </Button>
-      
+
       <Grid Grid.Row="9">
          <Grid.ColumnDefinitions>
             <ColumnDefinition Width="1*"/>
@@ -138,11 +138,11 @@
          </Grid.ColumnDefinitions>
 
          <Button Name="BackBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-            <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
          </Button>
-         
+
       </Grid>
-      
+
    </Grid>
-   
+
 </UserControl>

DrawImport/SecondaryComponentPageUC.xaml.vb

@@ -26,17 +26,17 @@ Public Class SecondaryComponentPageUC
       Dim ImageConverter As New ImageSourceConverter
       Dim ThicknessConverter As New ThicknessConverter
 
-      m_sMainCompoName = m_MainComponentPage.m_sCurrCompoFam  '"Compo" & m_MainComponentPage.GetIndexFromButton(CurrentMainBtn)
+      m_sMainCompoName = m_MainComponentPage.m_sCurrCompoFam
 
       'Assegnazione immagine e testo ai Button
-      Dim nCount As Integer = GetPrivateProfileInt(m_sMainCompoName, "Count", 0, m_MainWindow.GetIniFile())
+      Dim nCount As Integer = GetPrivateProfileInt(m_sMainCompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ClearButton(nCount)
       For index As Integer = 1 To nCount
          Dim CustomThickness As Thickness = ThicknessConverter.ConvertFromString("0")
-         Dim nCompoName As Integer = GetPrivateProfileInt(m_sMainCompoName, "Compo" & index, 0, m_MainWindow.GetIniFile())
+         Dim nCompoName As Integer = GetPrivateProfileInt(m_sMainCompoName, S_EXTCOMPO & index, 0, m_MainWindow.GetIniFile())
          Dim sCompo As String = ""
          Dim sCompoImage As String = ""
-         m_MainComponentPage.GetPrivateProfileCompo(m_sMainCompoName, "Compo" & index, nCompoName, sCompo, sCompoImage, m_MainWindow.GetIniFile())
+         m_MainComponentPage.GetPrivateProfileCompo(m_sMainCompoName, S_EXTCOMPO & index, nCompoName, sCompo, sCompoImage, m_MainWindow.GetIniFile())
          Dim sCompoImageSource As ImageSource
 
          'verifico presenza immagine e la aggiungo
@@ -68,7 +68,7 @@ Public Class SecondaryComponentPageUC
 
          'verifico presenza testo
          If nCompoName > 0 Then
-            Dim sCompoName As String = EgtMsg(MSG_COMPONENTPAGEUC + nCompoName)
+            Dim sCompoName As String = EgtMsg(90400 + nCompoName)
             'verifico presenza immagine
             If sCompoImage.Length > 0 Then
                'se la lunghezza del testo è maggiore di 20 lo taglio
@@ -248,5 +248,5 @@ Public Class SecondaryComponentPageUC
       m_MainWindow.m_DrawPageUC.LeftButtonGrd.Children.Add(m_MainComponentPage)
    End Sub
 
-    
+
 End Class

DrawImport/SideAngle.vb

@@ -159,7 +159,7 @@ Module SideAngle
       Return True
    End Function
 
-   Private Function WriteSideAngleOnLoop(LoopId As Integer, TextLayId As Integer) As Boolean
+   Friend Function WriteSideAngleOnLoop(LoopId As Integer, TextLayId As Integer) As Boolean
       ' Verifiche
       If LoopId = GDB_ID.NULL Or TextLayId = GDB_ID.NULL Then Return False
       ' Calcolo dimensione ingombro Loop
@@ -201,7 +201,7 @@ Module SideAngle
    Friend Sub ColorToSideAngle(nCtx As Integer)
       ' Leggo dati corrispondenza colore-angolo
       Dim CurrCSA As New ColorSideAngs
-      CurrCSA.Read( m_MainWindow.GetIniFile)
+      CurrCSA.Read(m_MainWindow.GetIniFile)
       ' Imposto contesto corrente
       EgtSetCurrentContext(nCtx)
       ' Ciclo sui pezzi
@@ -212,27 +212,31 @@ Module SideAngle
          Dim LoopId As Integer = EgtGetFirstNameInGroup(PartId, NAME_OUTLOOP)
          While LoopId <> GDB_ID.NULL
             ' Ciclo sulle curve
-            Dim PrevId As Integer = EgtGetLastInGroup( LoopId)
-            Dim EntId As Integer = EgtGetFirstInGroup( LoopId)
+            Dim PrevId As Integer = EgtGetLastInGroup(LoopId)
+            Dim EntId As Integer = EgtGetFirstInGroup(LoopId)
             While EntId <> GDB_ID.NULL
-               Dim NextId As Integer = EgtGetNext( EntId)
-               If  NextId = GDB_ID.NULL Then NextId = EgtGetFirstInGroup( LoopId)
-               If VerifySideAnglePossible( PrevId, EntId, NextId, bOutLoop) Then
+               Dim NextId As Integer = EgtGetNext(EntId)
+               If NextId = GDB_ID.NULL Then NextId = EgtGetFirstInGroup(LoopId)
+               If VerifySideAnglePossible(PrevId, EntId, NextId, bOutLoop) Then
                   Dim colEnt As Color3d
-                  If EgtGetColor( EntId, colEnt) Then
+                  If EgtGetColor(EntId, colEnt) Then
                      Dim dAng As Double
                      Dim dHeel As Double
-                     If CurrCSA.GetSideAngHeel( colEnt, dAng, dHeel) Then
-                        EgtSetInfo( EntId, INFO_SIDE_ANGLE, dAng)
-                        EgtSetInfo( EntId, INFO_ORIG_SIDE_ANGLE, dAng)
-                        EgtSetInfo( EntId, INFO_HEEL, dHeel)
+                     If CurrCSA.GetSideAngHeel(colEnt, dAng, dHeel) Then
+                        EgtSetInfo(EntId, INFO_SIDE_ANGLE, dAng)
+                        EgtSetInfo(EntId, INFO_ORIG_SIDE_ANGLE, dAng)
+                        EgtSetInfo(EntId, INFO_HEEL, dHeel)
+                        Dim sSawingTilted As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
+                        If Not String.IsNullOrWhiteSpace(sSawingTilted) Then
+                           EgtSetInfo(EntId, DEF_MACHINING_TILTED, sSawingTilted)
+                        End If
                      End If
                   End If
                End If
                PrevId = EntId
-               EntId = EgtGetNext( EntId)
+               EntId = EgtGetNext(EntId)
             End While
-            If bOutLoop then
+            If bOutLoop Then
                bOutLoop = False
                LoopId = EgtGetFirstNameInGroup(PartId, NAME_INLOOP)
             Else

DrawImport/SideAngleOneForAllWindow.xaml

@@ -0,0 +1,83 @@
+<Window x:Class="SideAngleOneForAllWindow"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        Title="ChooseTool" Height="255.9" Width="426.6" WindowStyle="None" 
+        ResizeMode="NoResize" ShowInTaskbar="False" AllowsTransparency="True"
+        Background="Transparent">
+
+   <Border Style="{DynamicResource OmagCut_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.5*"/>
+            <ColumnDefinition Width="4*"/>
+            <ColumnDefinition Width="0.5*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.7*"/>
+            <RowDefinition Height="0.3*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+         </Grid.RowDefinitions>
+         <TextBlock Name="TitleTxBl"
+                    Grid.ColumnSpan="3"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+         <Grid Grid.Row="1"
+               Grid.Column="1">
+            <Grid.RowDefinitions>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="A °"
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                       FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <TextBlock Grid.Column="1" 
+                       Text="T"
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                       FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <ComboBox Grid.Row="1"
+                      Name="SideAngleOneForAllCBx"
+                      Margin="10,0,10,0">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" FontSize="20"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>
+            <ComboBox Grid.Row="1"
+                      Grid.Column="1"
+                      Name="SideHeelOneForAllCBx"
+                      Margin="10,0,10,0">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" FontSize="20"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>
+         </Grid>
+
+         <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+               <Image Source="{DynamicResource VImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="3" Style="{DynamicResource OmagCut_GradientBlueIconButton}" 
+                    IsCancel="True">
+               <Image Source="{DynamicResource XImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
+      </Grid>
+   </Border>
+</Window>

DrawImport/SideAngleOneForAllWindow.xaml.vb

@@ -0,0 +1,20 @@
+Public Class SideAngleOneForAllWindow
+
+   Sub New()
+
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+      TitleTxBl.Text = EgtUILib.EgtMsg(91253)      ' Seleziona Angolo e Tallone
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      DialogResult = True
+   End Sub
+
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      DialogResult = False
+   End Sub
+
+End Class

DrawImport/SideAngleUc.xaml

@@ -1,17 +1,17 @@
 <UserControl x:Class="SideAngleUC"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
-   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
-   mc:Ignorable="d" 
-   d:DesignHeight="597.1" d:DesignWidth="255.9">
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             mc:Ignorable="d" 
+             d:DesignHeight="636.9" d:DesignWidth="255.9">
 
    <!-- Definizione della Grid Laterale -->
    <Grid Name="VariablesCompoGrid"  Grid.RowSpan="2">
       <Grid.ColumnDefinitions>
          <ColumnDefinition Width="1.2*"/>
-         <ColumnDefinition Width="0.3*"/> 
+         <ColumnDefinition Width="0.3*"/>
          <ColumnDefinition Width="1*"/>
          <ColumnDefinition Width="1*"/>
       </Grid.ColumnDefinitions>
@@ -28,177 +28,197 @@
          <RowDefinition Height="1*"/>
          <RowDefinition Height="1*"/>
          <RowDefinition Height="0.2*"/>
-         <RowDefinition Height="4*"/>
+         <RowDefinition Height="5*"/>
          <!--<RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>-->
       </Grid.RowDefinitions>
 
-      <Grid>
+      <Grid Name="SideAngleGrid" Grid.ColumnSpan="2">
          <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="0.4*"/>
-            <ColumnDefinition Width="0.5*"/>
-            <ColumnDefinition Width="0.5*"/>
-            <ColumnDefinition Width="0.4*"/>
+            <!--<ColumnDefinition Width="0.4*"/>-->
+            <ColumnDefinition Width="0.8*"/>
+            <ColumnDefinition Width="0.8*"/>
+            <ColumnDefinition Width="0.8*"/>
          </Grid.ColumnDefinitions>
-         <Button Name="PrevBtn" Grid.Column="1" Margin="4,0,4,0" Padding="0" Content="&lt;" Style="{StaticResource OmagCut_YellowTextButton}"/>
-         <Button Name="NextBtn" Grid.Column="2" Margin="4,0,4,0" Padding="0" Content="&gt;" Style="{StaticResource OmagCut_YellowTextButton}"/>
+         <Button Name="PrevBtn" Grid.Column="0" Margin="2,0,2,0" Padding="0" Content="&lt;" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+         <Button Name="NextBtn" Grid.Column="1" Margin="2,0,2,0" Padding="0" Content="&gt;" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+         <CheckBox Name="SideAngleChBx" Grid.Column="2" Margin="2,0,0,0" Padding="0"/>
       </Grid>
 
       <TextBlock Name="SideAngleBl" Grid.Row="0" Grid.Column="2" Text="A °"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                 FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
 
       <TextBlock Name="HeelBl" Grid.Row="0" Grid.Column="3" Text="T"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+                 Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                 FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
 
-      <TextBlock Name="Entity1" Grid.Row="1" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="NewEntity" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <CheckBox Name="NewA1" Grid.Column="1" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
+                Margin="-20,0,0,0"/>
+      <EgtWPFLib:EgtTextBox Name="NewA1TxBx" Grid.Column="2" Grid.Row="1" Width="60" IsLength="False"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+      <EgtWPFLib:EgtTextBox Name="NewH1TxBx" Grid.Column="3" Grid.Row="1" Width="60"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+      <TextBlock Name="Entity1" Grid.Row="1" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A1" Grid.Column="1" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A1TxBx" Grid.Column="2" Grid.Row="1" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                Margin="-20,0,0,0"/>
+      <EgtWPFLib:EgtTextBox Name="A1TxBx" Grid.Column="2" Grid.Row="1" Width="60" IsLength="False"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H1TxBx" Grid.Column="3" Grid.Row="1" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity2" Grid.Row="2" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity2" Grid.Row="2" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A2" Grid.Column="1" Grid.Row="2" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A2TxBx" Grid.Column="2" Grid.Row="2" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                Margin="-20,0,0,0"/>
+      <EgtWPFLib:EgtTextBox Name="A2TxBx" Grid.Column="2" Grid.Row="2" Width="60" IsLength="False"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H2TxBx" Grid.Column="3" Grid.Row="2" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity3" Grid.Row="3" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity3" Grid.Row="3" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A3" Grid.Column="1" Grid.Row="3" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A3TxBx" Grid.Column="2" Grid.Row="3" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                Margin="-20,0,0,0"/>
+      <EgtWPFLib:EgtTextBox Name="A3TxBx" Grid.Column="2" Grid.Row="3" Width="60" IsLength="False"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H3TxBx" Grid.Column="3" Grid.Row="3" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity4" Grid.Row="4" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity4" Grid.Row="4" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A4" Grid.Column="1" Grid.Row="4" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A4TxBx" Grid.Column="2" Grid.Row="4" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                Margin="-20,0,0,0"/>
+      <EgtWPFLib:EgtTextBox Name="A4TxBx" Grid.Column="2" Grid.Row="4" Width="60" IsLength="False"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H4TxBx" Grid.Column="3" Grid.Row="4" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity5" Grid.Row="5" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity5" Grid.Row="5" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A5" Grid.Column="1" Grid.Row="5" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A5TxBx" Grid.Column="2" Grid.Row="5" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                Margin="-20,0,0,0"/>
+      <EgtWPFLib:EgtTextBox Name="A5TxBx" Grid.Column="2" Grid.Row="5" Width="60" IsLength="False"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H5TxBx" Grid.Column="3" Grid.Row="5" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity6" Grid.Row="6" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity6" Grid.Row="6" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A6" Grid.Column="1" Grid.Row="6" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A6TxBx" Grid.Column="2" Grid.Row="6" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                Margin="-20,0,0,0"/>
+      <EgtWPFLib:EgtTextBox Name="A6TxBx" Grid.Column="2" Grid.Row="6" Width="60" IsLength="False"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H6TxBx" Grid.Column="3" Grid.Row="6" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity7" Grid.Row="7" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity7" Grid.Row="7" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A7" Grid.Column="1" Grid.Row="7" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A7TxBx" Grid.Column="2" Grid.Row="7" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                Margin="-20,0,0,0"/>
+      <EgtWPFLib:EgtTextBox Name="A7TxBx" Grid.Column="2" Grid.Row="7" Width="60" IsLength="False"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H7TxBx" Grid.Column="3" Grid.Row="7" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity8" Grid.Row="8" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity8" Grid.Row="8" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A8" Grid.Column="1" Grid.Row="8" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A8TxBx" Grid.Column="2" Grid.Row="8" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                Margin="-20,0,0,0"/>
+      <EgtWPFLib:EgtTextBox Name="A8TxBx" Grid.Column="2" Grid.Row="8" Width="60" IsLength="False"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H8TxBx" Grid.Column="3" Grid.Row="8" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity9" Grid.Row="9" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity9" Grid.Row="9" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A9" Grid.Column="1" Grid.Row="9" Height="30" Width="40" HorizontalAlignment="Right"
-         Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A9TxBx" Grid.Column="2" Grid.Row="9" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                  Margin="-20,0,0,0"/>
+      <EgtWPFLib:EgtTextBox Name="A9TxBx" Grid.Column="2" Grid.Row="9" Width="60" IsLength="False"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H9TxBx" Grid.Column="3" Grid.Row="9" Width="60"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <TextBlock Name="Entity10" Grid.Row="10" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+      <TextBlock Name="Entity10" Grid.Row="10" Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A10" Grid.Column="1" Grid.Row="10" Height="30" Width="40" HorizontalAlignment="Right"
-          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A10TxBx" Grid.Column="2" Grid.Row="10" Width="60"
+                Margin="-20,0,0,0"/>
+      <EgtWPFLib:EgtTextBox Name="A10TxBx" Grid.Column="2" Grid.Row="10" Width="60" IsLength="False"
                             Margin="0,0,0,-2"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H10TxBx" Grid.Column="3" Grid.Row="10" Width="60"
                             Margin="0,0,0,-2"
-                            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-      <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4">
-          <Grid.ColumnDefinitions>
-                <ColumnDefinition Width="1.5*"/>
-                <ColumnDefinition Width="0.3*"/>
-                <ColumnDefinition Width="0.6*"/>
-                <ColumnDefinition Width="0.6*"/>
-            </Grid.ColumnDefinitions>
-            <Grid.RowDefinitions>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-            </Grid.RowDefinitions>
+      <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4" >
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="1.5*"/>
+            <ColumnDefinition Width="0.3*"/>
+            <ColumnDefinition Width="0.6*"/>
+            <ColumnDefinition Width="0.6*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.9*"/>
+            <RowDefinition Height="0.9*"/>
+            <RowDefinition Height="0.9*"/>
+            <RowDefinition Height="0.9*"/>
+            <RowDefinition Height="0.9*"/>
+         </Grid.RowDefinitions>
 
-            <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
-               Text="Offset"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter1TxBx" 
-               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="0" 
-               Width="85" Height="30"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
+                    Text="Offset"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter1TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="0" 
+                               Width="85" Height="30"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-            <TextBlock Name="Parameter2TxBl" Grid.Row="1" Grid.ColumnSpan="2"
-               Text="Offset2"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter2TxBx" 
-               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="1" Width="85"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <UniformGrid Rows="1" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Width="90" >
-                <EgtWPFLib:EgtTextBox Name="Parameter2aTxBx" 
-                                      Grid.Column="2" Grid.Row="12"
-                                      Width="40" Height="30"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-                <EgtWPFLib:EgtTextBox Name="Parameter2bTxBx" 
-                                      Grid.Column="3" Grid.Row="12" 
-                                      Width="40" Height="30"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            </UniformGrid>
+         <TextBlock Name="Parameter2TxBl" Grid.Row="1" Grid.ColumnSpan="2"
+                    Text="Offset2"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter2TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="1" Width="85"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <UniformGrid Rows="1" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Width="90" >
+            <EgtWPFLib:EgtTextBox Name="Parameter2aTxBx" 
+                                  Grid.Column="2" Grid.Row="12"
+                                  Width="40" Height="30" IsLength="False"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter2bTxBx" 
+                                  Grid.Column="3" Grid.Row="12" 
+                                  Width="40" Height="30"
+                                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         </UniformGrid>
 
 
-            <TextBlock Name="Parameter3TxBl" Grid.Row="2" Grid.ColumnSpan="2"
-               Text="Affondamento"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter3TxBx" 
-                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="2" 
-                                  Margin="0,0,0,-2"
-                                  Width="85" Height="30"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="Parameter3TxBl" Grid.Row="2" Grid.ColumnSpan="2"
+                    Text="Affondamento"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter3TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="2" 
+                               Margin="0,0,0,-2"
+                               Width="85" Height="30"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-            <TextBlock Name="Parameter4TxBl" Grid.Row="3" Grid.ColumnSpan="2"
-               Text="Accorciamento"
-               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
-               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
-            <EgtWPFLib:EgtTextBox Name="Parameter4TxBx" 
-                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="3" 
-                                  Margin="0,0,0,-2"
-                                  Width="85" Height="30"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-        </Grid>
+         <TextBlock Name="Parameter4TxBl" Grid.Row="3" Grid.ColumnSpan="2"
+                    Text="Accorciamento"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter4TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="3" 
+                               Margin="0,0,0,-2"
+                               Width="85" Height="30"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+         <TextBlock Name="Parameter5TxBl" Grid.Row="4" Grid.ColumnSpan="2"
+                    Text="Angolo"
+                    Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+                    FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+         <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
+                               Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="4" 
+                               Margin="0,0,0,-2"
+                               Width="85" Height="30" IsLength="False"
+                               Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-        <!--<TextBlock Name="Parameter1TxBl" Grid.Row="11" Text="Offset"
+      </Grid>
+
+      <!--<TextBlock Name="Parameter1TxBl" Grid.Row="11" Text="Offset"
                Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
                FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
       <EgtWPFLib:EgtTextBox Name="Parameter1TxBx" Grid.Column="1" Grid.ColumnSpan="3" Grid.Row="11" Width="90"

DrawImport/SideAngleUc.xaml.vb

@@ -34,7 +34,9 @@ Public Class SideAngleUC
    Friend m_dDripOffset2 As Double = 0
    Friend m_nEngrNbr2 As Integer = 1
    Friend m_dDripDepth As Double = 10
+   Friend m_dEngraveDepth2 As Double = 15
    Friend m_dDripShort As Double = 0
+   Friend m_dEngraveAngle As Double = 0
 
    Private CurrEntityDrip As DripEntity
 
@@ -49,10 +51,10 @@ Public Class SideAngleUC
 
       ' Imposto messaggi a fondo pagina
       If m_Mode <> ModeOpt.SIDEANGLE Then
-         Parameter1TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 10)         ' Offset
-         Parameter2TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 16)         ' Offset2
-         Parameter3TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11)         ' Affondamento
-         Parameter4TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 12)         ' Accorciamento
+         Parameter1TxBl.Text = EgtMsg(90460)         ' Offset
+         Parameter2TxBl.Text = EgtMsg(90466)         ' Offset2
+         Parameter3TxBl.Text = EgtMsg(90461)         ' Affondamento
+         Parameter4TxBl.Text = EgtMsg(90462)         ' Accorciamento
       End If
 
       If m_CallingPage = MainWindow.Pages.Draw Then
@@ -75,10 +77,12 @@ Public Class SideAngleUC
 
       ' Inizializzo lati per angoli e per gocciolatoi (ne compilo la lista e aggiungo la scritta nel disegno)
       InitSides()
-      ' Aggiorno testi nel disegno e creo i gocciolatoi
-      RefreshSideAngleText()
+      '' Aggiorno testi nel disegno e creo i gocciolatoi
+      'RefreshSideAngleText()
       ' Aggiorno check e valori
       RefreshCheckAndValue()
+      ' Aggiorno testi nel disegno e creo i gocciolatoi
+      RefreshSideAngleText()
 
       ' Gestisco visualizzazione di tutti i parametri
       If m_Mode = ModeOpt.SIDEANGLE Then
@@ -103,6 +107,9 @@ Public Class SideAngleUC
          ' Accorciamento
          Parameter4TxBl.Visibility = Windows.Visibility.Hidden
          Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         ' Angolo 
+         Parameter5TxBl.Visibility = Windows.Visibility.Hidden
+         Parameter5TxBx.Visibility = Windows.Visibility.Hidden
       Else
          ' se aggiungo gli ENGRAVE e i DRIP
 
@@ -114,10 +121,12 @@ Public Class SideAngleUC
             GetAngleTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
             GetHeelTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
          Next
+
          ' Offset
          Parameter1TxBl.Visibility = Windows.Visibility.Visible
          Parameter1TxBx.Visibility = Windows.Visibility.Visible
          Parameter2TxBl.Visibility = Windows.Visibility.Visible
+
          ' Offset2
          If m_Mode <> ModeOpt.ENGRAVE Then
             Parameter2TxBx.Visibility = Windows.Visibility.Visible
@@ -128,38 +137,97 @@ Public Class SideAngleUC
             Parameter2aTxBx.Visibility = Windows.Visibility.Visible
             Parameter2bTxBx.Visibility = Windows.Visibility.Visible
          End If
+
          ' Affondamento
          Parameter3TxBl.Visibility = Windows.Visibility.Visible
          Parameter3TxBx.Visibility = Windows.Visibility.Visible
+
          ' Accorciamento
-         Parameter4TxBl.Visibility = Windows.Visibility.Hidden
-         Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         If m_Mode = ModeOpt.ENGRAVE Then
+            ' modifico il nome del messaggio 
+            Parameter4TxBl.Text = EgtMsg(90461) & "2"     ' Affondamento2
+            Parameter4TxBl.Visibility = Windows.Visibility.Visible
+            Parameter4TxBx.Visibility = Windows.Visibility.Visible
+         Else
+            Parameter4TxBl.Visibility = Windows.Visibility.Hidden
+            Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         End If
+
+         ' Angolo
+         If m_Mode = ModeOpt.ENGRAVE Then
+            ' modifico il nome del messaggio 
+            Parameter5TxBl.Text = EgtMsg(90459)            ' Angolo
+            Parameter5TxBl.Visibility = Windows.Visibility.Visible
+            Parameter5TxBx.Visibility = Windows.Visibility.Visible
+         Else
+            Parameter5TxBl.Visibility = Windows.Visibility.Hidden
+            Parameter5TxBx.Visibility = Windows.Visibility.Hidden
+         End If
+
       End If
 
       ' Gestisco Checkbox e nomi in base al numero di lati inclinabili
-      TxBlChBxView()
+      ' Controllo se la checkbox SideAngle è attiva
+      If SideAngleChBx.IsChecked Then
+         Dim dSideAngle As Double = 0
+         Dim dHell As Double = 0
+         ' Controllo se l'angolo della nuova entità non è nullo
+         If Not String.IsNullOrEmpty(NewA1TxBx.Text) Then
+            StringToDouble(NewA1TxBx.Text, dSideAngle)
+            ' Controllo se l'angolo è diverso da 0
+            If dSideAngle <> 0 Then
+               ' Aggiorno l'angolo delle entità
+               UpdateSideAngleAllEntities()
+            End If
+         End If
+         ' Controllo se il tallone della nuova entità non è nullo
+         If Not String.IsNullOrEmpty(NewH1TxBx.Text) Then
+            StringToDouble(NewH1TxBx.Text, dHell)
+            ' Controllo se il tallone è maggiore di 0
+            If dHell > 0 Then
+               ' Aggiorno il tallone delle entità
+               UpdateHeelAllEntities()
+            End If
+         End If
+         ' Elimino le righe per riposizionarle
+         Dim nMyShow = Math.Max( m_nShow, 1)
+         Grid.SetRow(NewEntity, MAX_LINES - nMyShow + 1)
+         Grid.SetRow(NewA1TxBx, MAX_LINES - nMyShow + 1)
+         Grid.SetRow(NewH1TxBx, MAX_LINES - nMyShow + 1)
+
+         Grid.SetRow(SideAngleBl, MAX_LINES - nMyShow)
+         Grid.SetRow(HeelBl, MAX_LINES - nMyShow)
+         Grid.SetRow(SideAngleGrid, MAX_LINES - nMyShow)
+         ' Rendo visibile solo la nuova entità
+         CollapsedCheckAllTextSideAng()
+      Else
+         ' Altrimenti eseguo impaginazione classica
+         TxBlChBxView()
+      End If
 
       ' Aggiorno valori
       If m_Mode = ModeOpt.DRIP Then
-         m_dDripOffset = GetPrivateProfileDouble( S_SIDES, K_DRIPOFFSET, 20, m_MainWindow.GetIniFile())
-         m_dDripOffset2 = GetPrivateProfileDouble( S_SIDES, K_DRIPOFFSET2, 0, m_MainWindow.GetIniFile())
-         m_dDripDepth = GetPrivateProfileDouble( S_SIDES, K_DRIPDEPTH, 10, m_MainWindow.GetIniFile())
-         m_dDripShort = GetPrivateProfileDouble( S_SIDES, K_DRIPSHORT, 0, m_MainWindow.GetIniFile())
-         Parameter1TxBx.Text = LenToString( m_dDripOffset, 3)
-         Parameter2TxBx.Text = LenToString( m_dDripOffset2, 3)
-         Parameter3TxBx.Text = LenToString( m_dDripDepth, 3)
-         Parameter4TxBx.Text = LenToString( m_dDripShort, 3)
+         m_dDripOffset = GetPrivateProfileDouble(S_SIDES, K_DRIPOFFSET, 20, m_MainWindow.GetIniFile())
+         m_dDripOffset2 = GetPrivateProfileDouble(S_SIDES, K_DRIPOFFSET2, 0, m_MainWindow.GetIniFile())
+         m_dDripDepth = GetPrivateProfileDouble(S_SIDES, K_DRIPDEPTH, 10, m_MainWindow.GetIniFile())
+         m_dDripShort = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT, 0, m_MainWindow.GetIniFile())
+         Parameter1TxBx.Text = LenToString(m_dDripOffset, 3)
+         Parameter2TxBx.Text = LenToString(m_dDripOffset2, 3)
+         Parameter3TxBx.Text = LenToString(m_dDripDepth, 3)
+         Parameter4TxBx.Text = LenToString(m_dDripShort, 3)
       ElseIf m_Mode = ModeOpt.ENGRAVE Then
-         m_dDripOffset = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEOFFSET, 20, m_MainWindow.GetIniFile())
-         m_nEngrNbr2 = GetPrivateProfileInt( S_SIDES, K_ENGRAVENUMBER2, 1, m_MainWindow.GetIniFile())
-         m_dDripOffset2 = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEOFFSET2, 0, m_MainWindow.GetIniFile())
-         m_dDripDepth = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEDEPTH, 10, m_MainWindow.GetIniFile())
-         m_dDripShort = GetPrivateProfileDouble( S_SIDES, K_ENGRAVESHORT, 0, m_MainWindow.GetIniFile())
-         Parameter1TxBx.Text = LenToString( m_dDripOffset, 3)
+         m_dDripOffset = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEOFFSET, 20, m_MainWindow.GetIniFile())
+         m_nEngrNbr2 = GetPrivateProfileInt(S_SIDES, K_ENGRAVENUMBER2, 1, m_MainWindow.GetIniFile())
+         m_dDripOffset2 = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEOFFSET2, 0, m_MainWindow.GetIniFile())
+         m_dDripDepth = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH, 10, m_MainWindow.GetIniFile())
+         m_dEngraveDepth2 = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0, m_MainWindow.GetIniFile())
+         m_dEngraveAngle = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEANGLE, 0, m_MainWindow.GetIniFile())
+         Parameter1TxBx.Text = LenToString(m_dDripOffset, 3)
          Parameter2aTxBx.Text = m_nEngrNbr2.ToString()
-         Parameter2bTxBx.Text = LenToString( m_dDripOffset2, 3)
-         Parameter3TxBx.Text = LenToString( m_dDripDepth, 3)
-         Parameter4TxBx.Text = LenToString( m_dDripShort, 3)
+         Parameter2bTxBx.Text = LenToString(m_dDripOffset2, 3)
+         Parameter3TxBx.Text = LenToString(m_dDripDepth, 3)
+         Parameter4TxBx.Text = LenToString(m_dEngraveDepth2, 3)
+         Parameter5TxBx.Text = DoubleToString(m_dEngraveAngle, 3)
       End If
 
       ' Aggiorno visualizzazione
@@ -179,6 +247,10 @@ Public Class SideAngleUC
          ' Imposto contesto corrente
          EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
          ' Ricavo nome primo pezzo e lo sistemo
+         If m_Mode = ModeOpt.ENGRAVE And m_MainWindow.m_DrawPageUC.SelectedLayer = GDB_ID.NULL Then
+            PartId = EgtGetFirstPart()
+            m_MainWindow.m_DrawPageUC.SetCurrLayer(EgtGetFirstNameInGroup(PartId, NAME_OUTLOOP))
+         End If
          PartId = If(m_MainWindow.m_DrawPageUC.SelectedLayer <> GDB_ID.NULL, EgtGetFirstPart(), GDB_ID.NULL)
          ' Recupero nome layer con geometria di contorno (esterno o interno) del pezzo
          LoopId = m_MainWindow.m_DrawPageUC.SelectedLayer
@@ -252,10 +324,10 @@ Public Class SideAngleUC
       If LoopId <> GDB_ID.NULL Then
          If m_nCount = 0 Then
             If m_CallingPage = MainWindow.Pages.Draw Then
-               m_MainWindow.m_DrawPageUC.MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 7)   ' Non ci sono lati modificabili
+               m_MainWindow.m_DrawPageUC.MessageTxBx.Text = EgtMsg(90387)   ' Non ci sono lati modificabili
                m_MainWindow.m_DrawPageUC.MessageBrd.Background = Application.Current.FindResource("OmagCut_Yellow")
             Else
-               m_MainWindow.m_ImportPageUC.MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 7)   ' Non ci sono lati modificabili
+               m_MainWindow.m_ImportPageUC.MessageTxBx.Text = EgtMsg(90387)   ' Non ci sono lati modificabili
                m_MainWindow.m_ImportPageUC.MessageBrd.Background = Application.Current.FindResource("OmagCut_Yellow")
             End If
          Else
@@ -277,6 +349,12 @@ Public Class SideAngleUC
       If m_nCount <= MAX_LINES Then
          PrevBtn.Visibility = Windows.Visibility.Hidden
          NextBtn.Visibility = Windows.Visibility.Hidden
+         SideAngleChBx.Visibility = Windows.Visibility.Hidden
+
+         NewEntity.Visibility = Windows.Visibility.Hidden
+         NewA1.Visibility = Windows.Visibility.Hidden
+         NewA1TxBx.Visibility = Windows.Visibility.Hidden
+         NewH1TxBx.Visibility = Windows.Visibility.Hidden
       Else
          Grid.SetRow(PrevBtn, MAX_LINES - m_nShow)
          PrevBtn.Visibility = Windows.Visibility.Visible
@@ -284,6 +362,8 @@ Public Class SideAngleUC
          Grid.SetRow(NextBtn, MAX_LINES - m_nShow)
          NextBtn.Visibility = Windows.Visibility.Visible
          NextBtn.IsEnabled = (m_nCount > m_nCurrPage * MAX_LINES)
+         Grid.SetRow(SideAngleGrid, MAX_LINES - m_nShow)
+         SideAngleChBx.Visibility = Windows.Visibility.Visible
       End If
 
       ' Intestazione per angoli di lato
@@ -299,6 +379,8 @@ Public Class SideAngleUC
             Grid.SetRow(HeelBl, MAX_LINES - m_nShow)
             HeelBl.Text = EgtMsg(91654)  ' T
             HeelBl.Visibility = Windows.Visibility.Visible
+            Grid.SetRow(SideAngleGrid, MAX_LINES - m_nShow)
+            SideAngleChBx.Visibility = Windows.Visibility.Visible
          End If
       Else
          If m_nCount = 0 Then
@@ -335,7 +417,7 @@ Public Class SideAngleUC
                GetHeelTxBxFromIndex(Index).Text = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT & "A" & nI.ToString & "_End", 0, m_MainWindow.GetIniFile())
             End If
          End If
-            Dim TxBlIndex As Integer = (m_nCurrPage - 1) * MAX_LINES + nI - 1
+         Dim TxBlIndex As Integer = (m_nCurrPage - 1) * MAX_LINES + nI - 1
          GetTxBlFromIndex(Index).Text = If(m_Mode = ModeOpt.SIDEANGLE,
                                            m_SideAngleEntityList(TxBlIndex).sEntityName,
                                            m_DripEntityList(TxBlIndex).sEntityName)
@@ -355,6 +437,151 @@ Public Class SideAngleUC
       Next
    End Sub
 
+   Private Sub CheckedSideAngle() Handles SideAngleChBx.Checked
+      Grid.SetRow(NewEntity, MAX_LINES - m_nShow + 1)
+      Grid.SetRow(NewA1TxBx, MAX_LINES - m_nShow + 1)
+      Grid.SetRow(NewH1TxBx, MAX_LINES - m_nShow + 1)
+
+      ' Se interrompo la creazione di un unico SideAng
+      If Not GetSideAngleFromAllEntities() Then Return
+
+      CollapsedCheckAllTextSideAng()
+   End Sub
+
+   ' Rende visibile NewEntity quando si attiva la spunta sulla checkbox
+   Private Sub CollapsedCheckAllTextSideAng()
+      NewEntity.Text = "A#"
+
+      PrevBtn.Visibility = Visibility.Collapsed
+      NextBtn.Visibility = Visibility.Collapsed
+
+      NewEntity.Visibility = Visibility.Visible
+      NewA1TxBx.Visibility = Visibility.Visible
+      NewH1TxBx.Visibility = Visibility.Visible
+
+      Entity1.Visibility = Visibility.Collapsed
+      A1TxBx.Visibility = Visibility.Collapsed
+      H1TxBx.Visibility = Visibility.Collapsed
+
+      Entity2.Visibility = Visibility.Collapsed
+      A2TxBx.Visibility = Visibility.Collapsed
+      H2TxBx.Visibility = Visibility.Collapsed
+
+      Entity3.Visibility = Visibility.Collapsed
+      A3TxBx.Visibility = Visibility.Collapsed
+      H3TxBx.Visibility = Visibility.Collapsed
+
+      Entity4.Visibility = Visibility.Collapsed
+      A4TxBx.Visibility = Visibility.Collapsed
+      H4TxBx.Visibility = Visibility.Collapsed
+
+      Entity5.Visibility = Visibility.Collapsed
+      A5TxBx.Visibility = Visibility.Collapsed
+      H5TxBx.Visibility = Visibility.Collapsed
+
+      Entity6.Visibility = Visibility.Collapsed
+      A6TxBx.Visibility = Visibility.Collapsed
+      H6TxBx.Visibility = Visibility.Collapsed
+
+      Entity7.Visibility = Visibility.Collapsed
+      A7TxBx.Visibility = Visibility.Collapsed
+      H7TxBx.Visibility = Visibility.Collapsed
+
+      Entity8.Visibility = Visibility.Collapsed
+      A8TxBx.Visibility = Visibility.Collapsed
+      H8TxBx.Visibility = Visibility.Collapsed
+
+      Entity9.Visibility = Visibility.Collapsed
+      A9TxBx.Visibility = Visibility.Collapsed
+      H9TxBx.Visibility = Visibility.Collapsed
+
+      Entity10.Visibility = Visibility.Collapsed
+      A10TxBx.Visibility = Visibility.Collapsed
+      H10TxBx.Visibility = Visibility.Collapsed
+   End Sub
+
+   Private Sub UnCheckSideAngle() Handles SideAngleChBx.Unchecked
+      NewEntity.Visibility = Visibility.Collapsed
+      NewA1TxBx.Visibility = Visibility.Collapsed
+      NewH1TxBx.Visibility = Visibility.Collapsed
+
+      TxBlChBxView()
+      RefreshCheckAndValue()
+   End Sub
+
+   Private Function GetSideAngleFromAllEntities() As Boolean
+      Dim tmpSideAngleList As New List(Of Double)
+      tmpSideAngleList.Clear()
+      Dim tmpSideHeelList As New List(Of Double)
+      tmpSideHeelList.Clear()
+      Dim m_SideAngleOneForAllWindow As New SideAngleOneForAllWindow
+
+      For i As Integer = 0 To m_SideAngleEntityList.Count - 1
+         If Not tmpSideAngleList.Contains(m_SideAngleEntityList(i).dSideAngle) Then
+            tmpSideAngleList.Add(m_SideAngleEntityList(i).dSideAngle)
+         End If
+         If Not tmpSideHeelList.Contains(m_SideAngleEntityList(i).dSideHeel) Then
+            tmpSideHeelList.Add(m_SideAngleEntityList(i).dSideHeel)
+         End If
+      Next
+      NewA1TxBx.Text = DoubleToString(tmpSideAngleList(0), 2)
+      NewH1TxBx.Text = LenToString(tmpSideHeelList(0), 2)
+
+      If tmpSideAngleList.Count > 1 Or tmpSideHeelList.Count > 1 Then
+         m_SideAngleOneForAllWindow.SideAngleOneForAllCBx.ItemsSource = tmpSideAngleList
+         m_SideAngleOneForAllWindow.SideAngleOneForAllCBx.SelectedIndex = 0
+         m_SideAngleOneForAllWindow.SideHeelOneForAllCBx.ItemsSource = tmpSideHeelList
+         m_SideAngleOneForAllWindow.SideHeelOneForAllCBx.SelectedIndex = 0
+         m_SideAngleOneForAllWindow.ShowDialog()
+         If m_SideAngleOneForAllWindow.DialogResult Then
+            NewA1TxBx.Text = DoubleToString(m_SideAngleOneForAllWindow.SideAngleOneForAllCBx.SelectedItem, 2)
+            NewH1TxBx.Text = LenToString(m_SideAngleOneForAllWindow.SideHeelOneForAllCBx.SelectedItem, 2)
+            UpdateSideAngleAllEntities()
+            UpdateHeelAllEntities()
+         Else
+            SideAngleChBx.IsChecked = False
+            Return False
+         End If
+      End If
+      Return True
+   End Function
+
+   Private Sub UpdateHeelAllEntities()
+      ' Nuovo tallone
+      Dim dSideHeel As Double
+      StringToLen(NewH1TxBx.Text, dSideHeel)
+      ' Verifico stia nei limiti
+      If dSideHeel < 0 Then
+         dSideHeel = 0
+         NewH1TxBx.Text = "0"
+      End If
+      For Each Entity As SideAngleEntity In m_SideAngleEntityList
+         ' Lo modifico nella geometria e nella lista inclinazioni
+         ModifySideHeel(Entity.sEntityName, dSideHeel)
+         ' Aggiorno tutti i testi
+         RefreshSideAngleText()
+      Next
+   End Sub
+
+   Private Sub UpdateSideAngleAllEntities()
+      ' Nuovo angolo di inclinazione
+      Dim dSideAngle As Double
+      StringToDouble(NewA1TxBx.Text, dSideAngle)
+      ' Verifico stia nei limiti
+      If dSideAngle < -m_dMaxSideAng Then
+         dSideAngle = -m_dMaxSideAng
+         NewA1TxBx.Text = DoubleToString(dSideAngle, 2)
+      ElseIf dSideAngle > m_dMaxSideAng Then
+         dSideAngle = m_dMaxSideAng
+         NewA1TxBx.Text = DoubleToString(dSideAngle, 2)
+      End If
+      For Each Entity As SideAngleEntity In m_SideAngleEntityList
+         ' Lo modifico nella geometria e nella lista inclinazioni
+         ModifySideAngle(Entity.sEntityName, dSideAngle)
+         ' Aggiorno tutti i testi
+         RefreshSideAngleText()
+      Next
+   End Sub
 
    '-------------> Restituisce gli oggetto della grafica assegnato l'indice
    Private Function GetChBxFromIndex(Index As Integer) As CheckBox
@@ -459,15 +686,15 @@ Public Class SideAngleUC
    '-------------> Restituisce gli oggetto della grafica assegnato l'indice
 
    ' quando esco salvo nel file l'ultima configurazione per le incisioni
-   Private Sub SideAngleUC_Unloaded( sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+   Private Sub SideAngleUC_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Ricavo nome pezzo
-         Dim PartId As Integer = EgtGetFirstInGroup( GDB_ID.ROOT)
+         Dim PartId As Integer = EgtGetFirstInGroup(GDB_ID.ROOT)
          ' Svuoto layer in cui sono presenti i testi con le inclinazioni dei lati
          If m_Mode = ModeOpt.SIDEANGLE Then
-            EgtEmptyGroup( EgtGetFirstNameInGroup( PartId, SIDE_ANGLE_LAYER))
+            EgtEmptyGroup(EgtGetFirstNameInGroup(PartId, SIDE_ANGLE_LAYER))
          Else
-            EgtEmptyGroup( EgtGetFirstNameInGroup( PartId, SIDE_ANGLE_LAYER))
+            EgtEmptyGroup(EgtGetFirstNameInGroup(PartId, SIDE_ANGLE_LAYER))
          End If
       ElseIf m_CallingPage = MainWindow.Pages.Import Then
          ' Nessuna azione necessaria
@@ -480,16 +707,17 @@ Public Class SideAngleUC
          'WritePrivateProfileString( S_SIDES, K_DRIPSHORT, DoubleToString( m_dDripShort, 3), m_MainWindow.GetIniFile())
       ElseIf m_Mode = ModeOpt.ENGRAVE Then
          WritePrivateProfileString(S_SIDES, K_ENGRAVEOFFSET, LenToString(m_dDripOffset, 3), m_MainWindow.GetIniFile())
-         WritePrivateProfileString( S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString(), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString(), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, LenToString(m_dDripOffset2, 3), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3), m_MainWindow.GetIniFile())
          'WritePrivateProfileString( S_SIDES, K_ENGRAVESHORT, DoubleToString( m_dDripShort, 3), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVEANGLE, LenToString(m_dEngraveAngle, 3), m_MainWindow.GetIniFile())
       End If
 
       EgtDraw()
    End Sub
 
-
    ' aggiunge il messaggio nel disegno, se DripGeom creo la geometria
    Private Sub RefreshSideAngleText()
       Dim PartId As Integer = GDB_ID.NULL
@@ -497,7 +725,6 @@ Public Class SideAngleUC
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Imposto contesto corrente
          EgtSetCurrentContext(m_MainWindow.m_DrawPageUC.DrawScene.GetCtx())
-         ' Ricavo nome primo pezzo
          PartId = If(m_MainWindow.m_DrawPageUC.SelectedLayer <> GDB_ID.NULL, EgtGetFirstPart(), GDB_ID.NULL)
          ' Recupero nome layer con geometria di contorno (esterno o interno) del pezzo
          LoopId = m_MainWindow.m_DrawPageUC.SelectedLayer
@@ -563,13 +790,25 @@ Public Class SideAngleUC
          For nIndex As Integer = 1 To m_nCount
             Dim Entity As DripEntity = m_DripEntityList(nIndex - 1)
             ' Imposto check box (se sono stati definiti il numero corretto di CheckBox
-            If nIndex < ( m_nCurrPage - 1) * MAX_LINES Or nIndex > m_nCurrPage * MAX_LINES Then Continue For
+            If nIndex < (m_nCurrPage - 1) * MAX_LINES Or nIndex > m_nCurrPage * MAX_LINES Then Continue For
             Dim nChIndex As Integer = nIndex - (m_nCurrPage - 1) * MAX_LINES + MAX_LINES - m_nShow
             ' verifico se l'entità ha un gocciolatoio
             GetChBxFromIndex(nChIndex).IsChecked = Entity.bHaveDrip
             ' aggiorno i valore delle caselle di testo per le entità caricate (Start/End)
-            GetAngleTxBxFromIndex(nChIndex).Text = DoubleToString(Entity.dShortStart, 1)
-            GetHeelTxBxFromIndex(nChIndex).Text = LenToString(Entity.dShortStart, 1)
+            If m_Mode = ModeOpt.ENGRAVE Then
+               Dim dVal As Double = 0
+               If StringToLen(GetPrivateProfileDouble(S_SIDES, K_ENGRAVESHORT & "A" & nIndex.ToString & "_Start", 0, m_MainWindow.GetIniFile()), dVal) Then
+                  Entity.dShortStart = dVal
+               End If
+               If StringToLen(GetPrivateProfileDouble(S_SIDES, K_ENGRAVESHORT & "A" & nIndex.ToString & "_End", 0, m_MainWindow.GetIniFile()), dVal) Then
+                  Entity.dShortEnd = dVal
+               End If
+            Else
+               'GetAngleTxBxFromIndex(Index).Text = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT & "A" & nI.ToString & "_Start", 0, m_MainWindow.GetIniFile())
+               'GetHeelTxBxFromIndex(Index).Text = GetPrivateProfileDouble(S_SIDES, K_DRIPSHORT & "A" & nI.ToString & "_End", 0, m_MainWindow.GetIniFile())
+            End If
+            GetAngleTxBxFromIndex(nChIndex).Text = LenToString(Entity.dShortStart, 1)
+            GetHeelTxBxFromIndex(nChIndex).Text = LenToString(Entity.dShortEnd, 1)
          Next
       End If
    End Sub
@@ -618,7 +857,7 @@ Public Class SideAngleUC
       SideAngle.AddTextToLine(sEntityName, TextLayer, CurrLine, 20, dBBoxRad, True)
    End Sub
 
-   ' Funzione che crea le geometrie dei gocciolatoi
+   ' Funzione che crea le geometrie dei gocciolatoi (NON UTILIZZATA)
    Friend Sub CreateDripGeomOLD(nPartId As Integer)
       ' Recupero Id layer di contorno esterno
       Dim nOutLoopId = EgtGetFirstNameInGroup(nPartId, NAME_OUTLOOP)
@@ -710,7 +949,7 @@ Public Class SideAngleUC
       End If
    End Sub
 
-   ' nuova funzione per gestire l'accorcaimento dei segmenti
+   ' nuova funzione per gestire l'accorciamento dei segmenti
    Friend Sub CreateDripGeom(nPartId As Integer)
       ' Recupero Id layer di contorno esterno
       Dim nOutLoopId = EgtGetFirstNameInGroup(nPartId, NAME_OUTLOOP)
@@ -738,6 +977,10 @@ Public Class SideAngleUC
             vJoint.Add(False)
          End If
       Next
+
+      ' se non riesco a generare un elenco allora esco
+      If vJoint.Count < 1 Then Return
+
       If vJoint(0) And vJoint(vJoint.Count - 1) Then
          bJointStart = True
       End If
@@ -809,6 +1052,9 @@ Public Class SideAngleUC
       Dim nCrvId = EgtGetFirstInGroup(DripLayer)
       While nCrvId <> GDB_ID.NULL
          EgtOffsetCurve(nCrvId, -m_dDripOffset, OFF_TYPE.EXTEND)
+         If m_Mode = ModeOpt.ENGRAVE Then
+            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+         End If
          nCrvId = EgtGetNext(nCrvId)
       End While
       ' Eventuali curve aggiuntive con offset2
@@ -819,10 +1065,16 @@ Public Class SideAngleUC
             For i As Integer = 1 To m_nEngrNbr2
                Dim nNewId As Integer = EgtCopy(nCrvId, nCrvId, GDB_POS.AFTER)
                EgtOffsetCurve(nNewId, -i * m_dDripOffset2, OFF_TYPE.EXTEND)
+               If m_Mode = ModeOpt.ENGRAVE Then
+                  EgtSetInfo(nNewId, INFO_DEPTH, m_dEngraveDepth2)
+               End If
             Next
             nCrvId = nNextCrvId
          End While
       End If
+
+      Dim ListEngraveSideAng As New List(Of Integer)
+
       If m_Mode = ModeOpt.DRIP Then
          ' Esplodo nelle curve componenti
          nCrvId = EgtGetFirstInGroup(DripLayer)
@@ -842,28 +1094,84 @@ Public Class SideAngleUC
          End While
       Else
          ' Assegno colore e attributi
+         Dim nInd As Integer = 0
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
             EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
-            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+            'EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
             EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
+            If nInd = 0 Then
+               ' solo se m_dEngraveAngle > 0
+               If Math.Abs(m_dEngraveAngle) > EPS_ANG_SMALL Then
+                  ' salvo l'Id della curva che deve essere manipolato separatamente
+                  ListEngraveSideAng.Add(nCrvId)
+               Else
+                  EgtRemoveInfo(nCrvId, INFO_SIDE_ANGLE)
+                  EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+               End If
+            Else
+               If nInd = m_nEngrNbr2 Then
+                  nInd = -1
+               End If
+               EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+            End If
+            nInd = nInd + 1
+            If nInd > m_nEngrNbr2 Then nInd = 0
             nCrvId = EgtGetNext(nCrvId)
          End While
       End If
+      SplitJointedSideEngrave(ListEngraveSideAng)
+   End Sub
+
+   Private Sub SplitJointedSideEngrave(ListEngraveSideAngId As List(Of Integer))
+      For Each nCrvId As Integer In ListEngraveSideAngId
+         ' eventualmente separo il taglio inclinato
+         Dim dUs, dUe As Double
+         EgtCurveDomain(nCrvId, dUs, dUe)
+         Dim dU As Double = dUs
+         While dU < dUe ' + EPS_ZERO
+            Dim ptCurr As Point3d
+            EgtAtParamPoint(nCrvId, dU + 1, nCrvId, ptCurr)
+            ' separa la curva in questo punto
+            Dim nNewCurvId As Integer = GDB_ID.NULL
+            If dUe > 1 Then
+               nNewCurvId = EgtSplitCurveAtPoint(nCrvId, ptCurr, GDB_RT.LOC)
+            Else
+               nNewCurvId = nCrvId
+            End If
+            EgtSetColor(nCrvId, COL_MCH_ONENGRAVE_ANG())
+            EgtSetInfo(nCrvId, INFO_SIDE_ANGLE, m_dEngraveAngle)
+            ' recupero il vettore di estrusione della curva e la direzione della curva
+            Dim vtAux As Vector3d
+            EgtStartVector(nCrvId, vtAux)
+            Dim vtExtrusion As Vector3d
+            EgtCurveExtrusion(nCrvId, vtExtrusion)
+            ' ruoto il vettore nella nuova direzione
+            vtExtrusion.Rotate(vtAux, -m_dEngraveAngle)
+            ' assegno il vettore di estrusione nella nuova direzione indicata (segno negativo perchè dentro il pezzo)
+            EgtModifyCurveExtrusion(nCrvId, vtExtrusion)
+            Dim ExtendFactor As Double = New Vector3d(0, 0, 1) * vtExtrusion
+            EgtModifyCurveThickness(nCrvId, -m_dDripDepth / ExtendFactor)
+            If dUe = 1 Then Exit While
+            nCrvId = nNewCurvId
+            ' aggiorno i valori del dominio della curva che rimane
+            EgtCurveDomain(nCrvId, dUs, dUe)
+         End While
+      Next
    End Sub
 
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
       If m_nCurrPage = 1 Then Return
       m_nCurrPage -= 1
-      m_nShow = Math.Min( m_nCount - ( m_nCurrPage - 1) * MAX_LINES, MAX_LINES)
+      m_nShow = Math.Min(m_nCount - (m_nCurrPage - 1) * MAX_LINES, MAX_LINES)
       TxBlChBxView()
       RefreshCheckAndValue()
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
-      If m_nCount <= ( m_nCurrPage - 1) * MAX_LINES Then Return
+      If m_nCount <= (m_nCurrPage - 1) * MAX_LINES Then Return
       m_nCurrPage += 1
-      m_nShow = Math.Min( m_nCount - ( m_nCurrPage - 1) * MAX_LINES, MAX_LINES)
+      m_nShow = Math.Min(m_nCount - (m_nCurrPage - 1) * MAX_LINES, MAX_LINES)
       TxBlChBxView()
       RefreshCheckAndValue()
    End Sub
@@ -875,7 +1183,7 @@ Public Class SideAngleUC
          Dim bVal As Boolean = CurrCheckBox.IsChecked()
          Dim SideIndex As Integer = CInt(CurrCheckBox.Name.Substring(1))
          ' Converto nome checkbox in nome elemento tenendo conto della pagina e dello slittamento verso il basso
-         Dim nCurrSide As Integer = ( m_nCurrPage - 1) * MAX_LINES + SideIndex - ( MAX_LINES - m_nShow)
+         Dim nCurrSide As Integer = (m_nCurrPage - 1) * MAX_LINES + SideIndex - (MAX_LINES - m_nShow)
          Dim sCurrSide As String = m_DripEntityList(nCurrSide - 1).sEntityName
          ' aggiorno l'entità con i valori scritti nel campo di testo
          Dim CurrEntity As DripEntity = DripEntity.FindEntity(sCurrSide)
@@ -1061,6 +1369,19 @@ Public Class SideAngleUC
       End If
    End Sub
 
+   '------->   riga nuova
+   Private Sub NewA1TxBx_EgtClosed(sender As Object, e As EventArgs) Handles NewA1TxBx.EgtClosed
+      If m_Mode = ModeOpt.SIDEANGLE Then
+         UpdateSideAngleAllEntities()
+      End If
+   End Sub
+
+   Private Sub NewH1TxBx_EgtClosed(sender As Object, e As EventArgs) Handles NewH1TxBx.EgtClosed
+      If m_Mode = ModeOpt.SIDEANGLE Then
+         UpdateHeelAllEntities()
+      End If
+   End Sub
+
    Private Sub SetSideAngleFromTxBx(SideIndex As Integer, AngleTxBx As EgtWPFLib.EgtTextBox)
       ' Nuovo angolo di inclinazione
       Dim dSideAngle As Double
@@ -1074,7 +1395,7 @@ Public Class SideAngleUC
          AngleTxBx.Text = DoubleToString(dSideAngle, 2)
       End If
       ' Converto nome checkbox in nome elemento tenendo conto della pagina e dello slittamento verso il basso
-      Dim nCurrSide As Integer = ( m_nCurrPage - 1) * MAX_LINES + SideIndex - ( MAX_LINES - m_nShow)
+      Dim nCurrSide As Integer = (m_nCurrPage - 1) * MAX_LINES + SideIndex - (MAX_LINES - m_nShow)
       Dim sCurrSide As String = m_SideAngleEntityList(nCurrSide - 1).sEntityName
       ' Lo modifico nella geometria e nella lista inclinazioni
       ModifySideAngle(sCurrSide, dSideAngle)
@@ -1144,7 +1465,7 @@ Public Class SideAngleUC
          HeelTxBx.Text = "0"
       End If
       ' Converto nome checkbox in nome elemento tenendo conto della pagina e dello slittamento verso il basso
-      Dim nCurrSide As Integer = ( m_nCurrPage - 1) * MAX_LINES + SideIndex - ( MAX_LINES - m_nShow)
+      Dim nCurrSide As Integer = (m_nCurrPage - 1) * MAX_LINES + SideIndex - (MAX_LINES - m_nShow)
       Dim sCurrSide As String = m_SideAngleEntityList(nCurrSide - 1).sEntityName
       ' Lo modifico nella geometria e nella lista inclinazioni
       ModifySideHeel(sCurrSide, dSideHeel)
@@ -1185,10 +1506,15 @@ Public Class SideAngleUC
       If dSideAngle <> 0 Then
          EgtSetInfo(CurrEntity.nGeomId, INFO_SIDE_ANGLE, dSideAngle)
          EgtSetInfo(CurrEntity.nGeomId, INFO_ORIG_SIDE_ANGLE, dSideAngle)
-      ' Cancello inclinazione nell'apposito campo info
+         Dim sSawingTilted As String = m_MainWindow.m_CurrentMachine.sCurrSawingTilted
+         If Not String.IsNullOrEmpty(sSawingTilted) And m_MainWindow.m_CurrentMachine.bApplySawingTilted Then
+            EgtSetInfo(CurrEntity.nGeomId, DEF_MACHINING_TILTED, sSawingTilted)
+         End If
+         ' Cancello inclinazione nell'apposito campo info
       Else
          EgtRemoveInfo(CurrEntity.nGeomId, INFO_SIDE_ANGLE)
          EgtRemoveInfo(CurrEntity.nGeomId, INFO_ORIG_SIDE_ANGLE)
+         EgtRemoveInfo(CurrEntity.nGeomId, DEF_MACHINING_TILTED)
       End If
       ' Aggiorno lista entità con nuova inclinazione
       CurrEntity.dSideAngle = dSideAngle
@@ -1206,7 +1532,7 @@ Public Class SideAngleUC
       ' Scrivo nuovo tallone nelle info
       If dSideHeel > 10 * EPS_SMALL Then
          EgtSetInfo(CurrEntity.nGeomId, INFO_HEEL, dSideHeel)
-      ' Cancello inclinazione nell'apposito campo info
+         ' Cancello inclinazione nell'apposito campo info
       Else
          EgtRemoveInfo(CurrEntity.nGeomId, INFO_HEEL)
       End If
@@ -1283,11 +1609,25 @@ Public Class SideAngleUC
    End Sub
 
    Private Sub Parameter4TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter4TxBx.EgtClosed
-      If m_Mode = ModeOpt.DRIP Or m_Mode = ModeOpt.ENGRAVE Then
+      If m_Mode = ModeOpt.DRIP Then
          ' Recupero il valore
          StringToLen(Parameter4TxBx.Text, m_dDripShort)
          ' Creo le geometrie dei gocciolatoi
          RefreshSideAngleText()
+      ElseIf m_Mode = ModeOpt.ENGRAVE Then
+         ' Recupero il valore
+         StringToLen(Parameter4TxBx.Text, m_dEngraveDepth2)
+         ' Creo le geometrie dei gocciolatoi
+         RefreshSideAngleText()
+      End If
+   End Sub
+
+   Private Sub Parameter5TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter5TxBx.EgtClosed
+      If m_Mode = ModeOpt.ENGRAVE Then
+         ' Recupero il valore
+         StringToDouble(Parameter5TxBx.Text, m_dEngraveAngle)
+         ' Creo le geometrie dei gocciolatoi
+         RefreshSideAngleText()
       End If
    End Sub