Inserita gestione Flag per Rettificata tagli inclinati

- in VerifyOutOfStrokes prima di controllare il valore dell'asse C si cerca di riportarlo nel range ammesso (modulo 360 gradi).

CAM/CamAuto.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Forms.Integration
+Imports EgtUILib
 
 Friend Module CamAuto
 
@@ -29,7 +30,7 @@ Friend Module CamAuto
       Return bOk
    End Function
 
-   Friend Function AddWaterJetMachining( nOperId As Integer, ByRef nWarn As Integer) As Boolean
+   Friend Function AddWaterJetMachining(nOperId As Integer, ByRef nWarn As Integer) As Boolean
       EgtLuaCreateGlobTable("CAM")
       SetLuaStandardCamParams()
       EgtLuaSetGlobIntVar("CAM.OPERID", nOperId)
@@ -93,7 +94,7 @@ Friend Module CamAuto
       If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS Then
          ' Reinserisco tutte le lavorazioni piane
          AddMachinings(GDB_ID.NULL, nWarn)
-      ' Se altrimenti progetto con cornici
+         ' Se altrimenti progetto con cornici
       ElseIf nPrjType = CurrentProjectPageUC.PRJ_TYPE.FRAMES Then
          ' Reinserisco tutte le lavorazioni delle cornici
          AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
@@ -155,6 +156,30 @@ Friend Module CamAuto
       Return bOk
    End Function
 
+   Friend Function ResetAllBRidges() As Boolean
+      Dim bOk As Boolean = True
+      Dim nMachGroup As Integer = EgtGetCurrMachGroup()
+      Dim nBridgesGroup As Integer = EgtGetFirstNameInGroup(nMachGroup, "Bridges")
+      bOk = EgtErase(nBridgesGroup)
+      Return bOk
+   End Function
+
+   Friend Function ResetAllRawPart() As Boolean
+      Dim nPhase As Integer = 1
+      Dim nOtherRaw As Integer = EgtGetFirstRawPart()
+      While nOtherRaw <> GDB_ID.NULL
+         ' se il pezzo non appartiene alla prima fase allora viene eliminato
+         If Not EgtVerifyRawPartPhase(nOtherRaw, nPhase) Then
+            Dim NextRaw As Integer = EgtGetNextRawPart(nOtherRaw)
+            EgtRemoveRawPart(nOtherRaw)
+            nOtherRaw = NextRaw
+         Else
+            nOtherRaw = EgtGetNextRawPart(nOtherRaw)
+         End If
+      End While
+      Return True
+   End Function
+
    ' verifico che il contorno passato non sia stato separato
    Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer)
       Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)

CadCuts/EditValueWD.xaml

@@ -27,6 +27,14 @@
          <EgtWPFLib:EgtTextBox Name="ValueTxBx" Grid.Column="1" Grid.Row="1"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
+         <ComboBox Name="ValueCmBx" Grid.Column="1" Grid.Row="1">
+            <ComboBox.ItemTemplate>
+               <DataTemplate>
+                  <TextBlock Text="{Binding}" FontSize="20" />
+               </DataTemplate>
+            </ComboBox.ItemTemplate>
+         </ComboBox>
+
          <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="0.5*"/>

CadCuts/EditValueWD.xaml.vb

@@ -1,6 +1,7 @@
 Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib
+Imports System.Collections.ObjectModel
 
 Public Class EditValueWD
 
@@ -8,29 +9,77 @@ Public Class EditValueWD
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private m_sMsg As String = "Value"
    Private m_sValue As String = ""
+   Private m_sList As ObservableCollection(Of String)
+   Private m_IsText As Boolean = True
 
+   ' avvia la visualizzazione della textbox
    Sub New(Owner As Window, Optional sMsg As String = "")
       Me.Owner = Owner
       m_sMsg = sMsg
+      m_IsText = True
       InitializeComponent()
    End Sub
 
-   Friend Function SetVal( dVal As Double) As Boolean
-      m_sValue = DoubleToString( dVal, 3)
+   Friend Function SetVal(dVal As Double, Optional ByVal bLen As Boolean = False) As Boolean
+      If bLen Then
+         m_sValue = LenToString(dVal, 3)
+      Else
+         m_sValue = DoubleToString(dVal, 3)
+      End If
       ValueTxBx.Text = m_sValue
-      Return true
+      Return True
    End Function
 
-   Friend Function GetVal() As Double
+   ' avvia la visualizzazione della combobox
+   Sub New(Owner As Window, sList As ObservableCollection(Of String), Optional sMsg As String = "")
+      Me.Owner = Owner
+      m_sMsg = sMsg
+      m_IsText = False
+      InitializeComponent()
+      m_sList = sList
+      SetComboBox(m_sList)
+   End Sub
+
+   Friend Function GetVal(Optional ByVal bLen As Boolean = False) As Double
       Dim dVal As Double = 0
-      StringToDouble( m_sValue, dVal)
+      If bLen Then
+         StringToLen(m_sValue, dVal)
+      Else
+         StringToDouble(m_sValue, dVal)
+      End If
       Return dVal
    End Function
 
+   Friend Function SetComboBox(sList As ObservableCollection(Of String)) As Boolean
+      ValueCmBx.ItemsSource = sList
+      Return True
+   End Function
+
+   Friend Function SetItemComboBox(sItem As String) As Boolean
+      For Each MyItem As String In ValueCmBx.ItemsSource
+         If MyItem = sItem Then
+            ValueCmBx.SelectedItem = MyItem
+         End If
+      Next
+      Return True
+   End Function
+
+   Friend Function GetItemComboBox() As String
+      Dim sVal As String = ValueCmBx.SelectedItem
+      Return sVal
+   End Function
+
    Private Sub EditValueWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
       ValueTxbl.Text = m_sMsg
+      If m_IsText Then
+         ValueCmBx.Visibility = Visibility.Collapsed
+         ValueTxBx.Visibility = Visibility.Visible
+      Else
+         ValueCmBx.Visibility = Visibility.Visible
+         ValueTxBx.Visibility = Visibility.Collapsed
+      End If
    End Sub
 
    Private Sub EditValueWD_Rendered(sender As Object, e As EventArgs) Handles Me.ContentRendered

CadCuts/MoveRawPartPage.xaml

@@ -7,162 +7,167 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
 
-   <!-- Definizione della SplitPage -->
-   <Grid Name="SplitPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
+    <!-- Definizione della SplitPage -->
+    <Grid Name="SplitPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-      <!--Upper button grid-->
-      <Grid Grid.Column="1">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="4*"/>
-            <ColumnDefinition Width="8*"/>
-         </Grid.ColumnDefinitions>
-
-         <!--Griglia per oscurare i bottoni della pagina sottostante-->
-         <Grid Background="{DynamicResource OmagCut_Gray}">
+        <!--Upper button grid-->
+        <Grid Grid.Column="1">
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="8*"/>
             </Grid.ColumnDefinitions>
 
-            <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            <!--Griglia per oscurare i bottoni della pagina sottostante-->
+            <Grid Background="{DynamicResource OmagCut_Gray}">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="PrevBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
+                        <Image.RenderTransform>
+                            <TransformGroup>
+                                <RotateTransform Angle="180"/>
+                            </TransformGroup>
+                        </Image.RenderTransform>
+                    </Image>
+                </Button>
+                <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+            </Grid>
+        </Grid>
+
+        <!--Left Button Grid-->
+        <Grid Grid.RowSpan="3">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
+
+            <Button Name="TopLBtn" Grid.Column="0" Grid.Row="1"
+         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+                <Image Source="{DynamicResource TopLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
-                  <Image.RenderTransform>
-                     <TransformGroup>
-                        <RotateTransform Angle="180"/>
-                     </TransformGroup>
-                  </Image.RenderTransform>
-               </Image>
+            <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
+         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
+                <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
-            <Button Name="ModifyBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-         </Grid>
-      </Grid>
-
-      <!--Left Button Grid-->
-      <Grid Grid.RowSpan="3">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="2*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
-
-         <Button Name="TopLBtn" Grid.Column="0" Grid.Row="1"
+            <Button Name="TopRBtn" Grid.Column="2" Grid.Row="1"
          Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource TopLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="UpBtn" Grid.Column="1" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource UpArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="TopRBtn" Grid.Column="2" Grid.Row="1"
-         Style="{DynamicResource OmagCut_TopGrayGradientYellowButton}">
-            <Image Source="{DynamicResource TopRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
+                <Image Source="{DynamicResource TopRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="LeftBtn" Grid.Column="0" Grid.Row="2"
          Style="{DynamicResource OmagCut_LeftGrayGradientYellowButton}">
-            <Image Source="{DynamicResource LeftArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="1" Grid.Row="2" Width="50"
+                <Image Source="{DynamicResource LeftArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <EgtWPFLib:EgtTextBox Name="StepMoveTxBx" Grid.Column="1" Grid.Row="2" Width="50"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-         <Button Name="ResetBtn" Grid.Column="1" Grid.Row="2"
+            <Button Name="ResetBtn" Grid.Column="1" Grid.Row="2"
             Style="{DynamicResource OmagCut_YellowTextButton}">
-         </Button>
-         <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
+            </Button>
+            <Button Name="RightBtn" Grid.Column="2" Grid.Row="2"
          Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RightArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="BottomLBtn" Grid.Column="0" Grid.Row="3"
+                <Image Source="{DynamicResource RightArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="BottomLBtn" Grid.Column="0" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource BottomLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
+                <Image Source="{DynamicResource BottomLeftImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="DownBtn" Grid.Column="1" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
-         <Button Name="BottomRBtn" Grid.Column="2" Grid.Row="3"
+                <Image Source="{DynamicResource DownArrowImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            <Button Name="BottomRBtn" Grid.Column="2" Grid.Row="3"
          Style="{DynamicResource OmagCut_BottomGrayGradientYellowButton}">
-            <Image Source="{DynamicResource BottomRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-         </Button>
+                <Image Source="{DynamicResource BottomRightImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
-         <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
+            <Button Name="RotateCounterClockwiseBtn" Grid.Column="0" Grid.Row="4"
             Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                 <Image Source="{DynamicResource CounterClockwiseRotateImg}" Width="64" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
-         </Button>
+            </Button>
 
-         <Grid Name="RotationAngle" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center" VerticalAlignment="Center">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="Auto"/>
-               <ColumnDefinition Width="Auto"/>
-            </Grid.ColumnDefinitions>
-            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50"
+            <Grid Name="RotationAngle" Grid.Column="1" Grid.Row="4" HorizontalAlignment="Center" VerticalAlignment="Center">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="Auto"/>
+                    <ColumnDefinition Width="Auto"/>
+                </Grid.ColumnDefinitions>
+                <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
+                <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
             Text="°"/>
-         </Grid>
+            </Grid>
 
-         <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
+            <Button Name="RotateClockwiseBtn" Grid.Column="2" Grid.Row="4"
             Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
+                <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
-         </Button>
+            </Button>
 
-
-         <Button Name="RemovePartBtn" Grid.ColumnSpan="2" Grid.Row="6"
+            <!--Gestione sfridi-->
+            <Button Name="RemovePartBtn" Grid.ColumnSpan="2" Grid.Row="6"
                  Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-         <Button Name="ScrapsBtn" Grid.Column="3" Grid.Row="6"
+            <Button Name="ScrapsBtn" Grid.Column="3" Grid.Row="6"
                  Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
+            <!--Gestione scarico pezzi-->
+            <Button Name="UnloadPartsBtn" Grid.ColumnSpan="2" Grid.Row="7"
+                 Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
             <Grid Grid.Row="7" Grid.ColumnSpan="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+            </Grid>
+
+        </Grid>
+
+        <!--Lower button grid, sfondo grigio per coprire i bottoni della pagina sottostante-->
+        <Grid Grid.Column="1" Grid.Row="2" Background="{DynamicResource OmagCut_Gray}">
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="10*"/>
             </Grid.ColumnDefinitions>
+            <!-- Inserimento della pausa durante il movimento sulla tavola di scarico-->
+            <Button Name="PauseBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+        </Grid>
 
-         </Grid>
-
-      </Grid>
-
-      <!--Lower button grid, sfondo grigio per coprire i bottoni della pagina sottostante-->
-      <Grid Grid.Column="1" Grid.Row="2" Background="{DynamicResource OmagCut_Gray}">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="10*"/>
-         </Grid.ColumnDefinitions>
-
-
-      </Grid>
-
-   </Grid>
+    </Grid>
 
 </UserControl>

CadCuts/MoveRawPartPage.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Forms.Integration
+Imports EgtUILib
 
 Public Class MoveRawPartPage
    ' Riferimento alla MainWindow
@@ -11,8 +12,12 @@ Public Class MoveRawPartPage
    Private m_nAuxTabId As Integer = GDB_ID.NULL
    ' Fase corrente
    Private m_nCurrPhase As Integer = 0
+   ' Disposizione corrente
+   Private m_nCurrDisposition As Integer = GDB_ID.NULL
    ' Premuto Prev
    Private m_bPrev As Boolean = False
+   ' Pemuto Next
+   Private m_bToNext As Boolean = False
    ' Dati movimento
    Private m_dStep As Double = 0
    Private m_dRotation As Double = 0
@@ -27,21 +32,28 @@ Public Class MoveRawPartPage
    Private m_bRemovedRaw As Boolean = False                 ' flag per rimozione manuale pezzi
    Private m_RawMoveDataList As New List(Of RawMoveData)    ' dati di movimento
    Private m_bRawWithCups As Boolean = False                ' flag per pezzo corrente con ventose
-
+   ' Visibilità comando Scrap
+   Private m_ScrapsVisibility As Visibility = Visibility.Visible
    Private m_CurrRawOnVacuum As Integer = GDB_ID.NULL
 
+   ' definisce se è stata inserito uno scarico 
+   Private m_IsCurrPhaseUnloaded As Boolean = False
+
    Private Sub MoveRawPartPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno testi
       RemovePartBtn.Content = EgtMsg(MSG_MOVERAWPAGEUC + 1)  'Rimuovi
       ModifyBtn.Content = EgtMsg(MSG_SPLITPAGEUC + 17)       'Modifica
       ResetBtn.Content = EgtMsg(MSG_NESTPAGEUC + 6)          'Reset
       ScrapsBtn.Content = "Add Scraps"
+      UnloadPartsBtn.Content = "Move part"
    End Sub
 
    Private Sub MoveRawPartPage_Loaded(sender As Object, e As EventArgs) Handles Me.Loaded
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
       m_SplitPage = m_MainWindow.m_CadCutPageUC.m_SplitPage
       m_bActive = True
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Leggo tipo movimento grezzi
       m_bByHand = (GetVacuumType() = 0 Or
                    Not m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.AUTO_MANIP) Or
@@ -53,7 +65,12 @@ Public Class MoveRawPartPage
       End If
       ' Deseleziono tutto
       EgtDeselectAll()
-      ' Recupero i tagli allungati prima definiti
+      ' resetto variabili di navigazione nelle fasi
+      m_bPrev = False
+      m_bToNext = False
+
+      '---------------------------- CREATE NEW PHASE ----------------------------
+      ' Recupero i tagli ABILITATI prima definiti
       Dim Cuts(0) As Integer
       m_SplitPage.GetEnabledCuts(Cuts)
       ' Fase precedente
@@ -62,11 +79,19 @@ Public Class MoveRawPartPage
       Dim vNewRaws As New List(Of Integer)
       If Not m_SplitPage.m_bShow Then
          SplitRawParts(nPrevPhase, Cuts, vNewRaws)
+         m_IsCurrPhaseUnloaded = False
       Else
-         EgtSetCurrPhase(nPrevPhase + 1)
+         nPrevPhase = nPrevPhase + 1
+         EgtSetCurrPhase(nPrevPhase)
          HideAllMachinings()
+         ' verifico se la fase corrente è di tipo scarico frontale
+         m_nCurrDisposition = EgtGetPhaseDisposition(nPrevPhase)
+         If IsDispUnloadOnAuxTab(m_nCurrDisposition) Then
+            m_SplitPage.m_bOnAuxTab = True
+         End If
       End If
       m_nCurrPhase = EgtGetCurrPhase()
+      '---------------------------- CREATE NEW PHASE ----------------------------
 
       '---------------------------- SCRAPS ----------------------------
       ' gestione visualizzazione del comando "Scraps"
@@ -86,37 +111,27 @@ Public Class MoveRawPartPage
          ScrapsVisibility = Visibility.Collapsed
       End If
       ' aggiorno la grafica
-      ScrapsBtn.Visibility = ScrapsVisibility
+      m_ScrapsVisibility = ScrapsVisibility
+      If m_ScrapsVisibility <> Visibility.Visible Then
+         Grid.SetColumnSpan(RemovePartBtn, 3)
+      Else
+         Grid.SetColumnSpan(RemovePartBtn, 2)
+      End If
       '---------------------------- SCRAPS ----------------------------
 
+      '---------------------------- AUX TABLE ---------------------------- 
       ' Se movimento pezzi finale, sistemazioni per tavolo ausiliario
-      If m_SplitPage.m_bOnAuxTab Then
-         m_nAuxTabId = EgtGetTableId(AUX_TAB)
-         ' Visualizzo tavolo ausiliario
-         Dim bOldEnMod As Boolean = EgtGetEnableModified()
-         If bOldEnMod Then EgtDisableModified()
-         EgtSetStatus(m_nAuxTabId, GDB_ST.ON_)
-         If bOldEnMod Then EgtEnableModified()
-         ' Se definizione movimenti
-         If Not m_SplitPage.m_bShow Then
-            ' Area tavolo ausiliario
-            Dim b3AuxTab As New BBox3d
-            EgtGetBBoxGlob(EgtGetFirstNameInGroup(m_nAuxTabId, "A1"), GDB_BB.STANDARD, b3AuxTab)
-            ' Area tavolo principale
-            Dim b3Tab As New BBox3d
-            EgtGetTableArea(1, b3Tab)
-            ' Imposto offset su tavolo principale per includere anche il secondario
-            Dim dOffsXP As Double = Math.Max(b3AuxTab.Max().x - b3Tab.Max().x, 0)
-            Dim dOffsYP As Double = Math.Max(b3AuxTab.Max().y - b3Tab.Max().y, 0)
-            Dim dOffsXM As Double = Math.Max(b3Tab.Min().x - b3AuxTab.Min().x, 0)
-            Dim dOffsYM As Double = Math.Max(b3Tab.Min().y - b3AuxTab.Min().y, 0)
-            EgtSetTableAreaOffset(dOffsXP, dOffsYP, dOffsXM, dOffsYM)
-         End If
-         EgtZoom(ZM.ALL)
-      ' altrimenti, aggiorno visualizzazione
-      Else
+      If m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
+         ' assegnazione delle info tavola ausiliaria alla dispozione corrente (Spostato nella funzione Refresh)
+         SetAuxTabInCurrDisposition()
+         UnloadPartsBtn.Content = "Go to MOVE part"
+         ' altrimenti, aggiorno visualizzazione
+      ElseIf Not m_SplitPage.m_bOnAuxTab And m_SplitPage.m_bEnableOnAuxTab Then
          EgtDraw()
+         UnloadPartsBtn.Content = "Go to UNLOAD part"
       End If
+      '---------------------------- AUX TABLE ---------------------------- 
+
       ' Carico i parametri di movimento
       m_dStep = GetPrivateProfileDouble(S_RAWMOVE, K_RAWSTEP, 50, m_MainWindow.GetIniFile())
       ' Ricavo la lunghezza del baffo di taglio 
@@ -175,6 +190,30 @@ Public Class MoveRawPartPage
 
       ' aggiorno il messaggio del comando per gestire gli sfridi
       VerifyIsNewScrap(m_CurrRawOnVacuum)
+      ' aggiorno la visibilità dei comandi
+      RefreshVisibility()
+      ' salvo l'idice della fase corrente
+      m_nCurrDisposition = EgtGetPhaseDisposition(m_nCurrPhase)
+      ' Abilitazione bottone modifica
+      ModifyBtn.IsEnabled = m_SplitPage.m_bShow
+      ' gestione abilitazione altri bottoni
+      EnableButtons()
+   End Sub
+
+   ' Gestione di visualizzazione dei comandi per il movimento dei pezzi
+   Private Sub RefreshVisibility()
+      ' Aggiorno visulizzazione comando per passare alla pagina di scarico
+      If Not m_SplitPage.m_bEnableOnAuxTab Then
+         UnloadPartsBtn.Visibility = Visibility.Hidden
+      Else
+         UnloadPartsBtn.Visibility = Visibility.Visible
+         If m_SplitPage.m_bOnAuxTab Then
+            UnloadPartsBtn.Content = "Go to MOVE part"
+            ' altrimenti, aggiorno visualizzazione
+         Else
+            UnloadPartsBtn.Content = "Go to UNLOAD part"
+         End If
+      End If
       ' Aggiorno interfaccia per taglio perpendicolare
       If m_bByHand Then
          UpBtn.Visibility = Windows.Visibility.Visible
@@ -190,8 +229,9 @@ Public Class MoveRawPartPage
          TopRBtn.Visibility = Windows.Visibility.Hidden
          BottomLBtn.Visibility = Windows.Visibility.Hidden
          BottomRBtn.Visibility = Windows.Visibility.Hidden
+         PauseBtn.Visibility = Windows.Visibility.Hidden
          ResetBtn.Visibility = Windows.Visibility.Hidden
-         ScrapsBtn.Visibility = Windows.Visibility.Visible
+         ScrapsBtn.Visibility = m_ScrapsVisibility
          ' altrimenti per movimento con ventose
       ElseIf Not m_SplitPage.m_bOnAuxTab Then
          UpBtn.Visibility = Windows.Visibility.Visible
@@ -207,8 +247,9 @@ Public Class MoveRawPartPage
          TopRBtn.Visibility = Windows.Visibility.Hidden
          BottomLBtn.Visibility = Windows.Visibility.Hidden
          BottomRBtn.Visibility = Windows.Visibility.Hidden
+         PauseBtn.Visibility = Windows.Visibility.Hidden
          ResetBtn.Visibility = Windows.Visibility.Hidden
-         ScrapsBtn.Visibility = Windows.Visibility.Visible
+         ScrapsBtn.Visibility = m_ScrapsVisibility
          ' altrimenti per movimento finale dei pezzi
       Else
          UpBtn.Visibility = Windows.Visibility.Hidden
@@ -224,13 +265,37 @@ Public Class MoveRawPartPage
          TopRBtn.Visibility = Windows.Visibility.Visible
          BottomLBtn.Visibility = Windows.Visibility.Visible
          BottomRBtn.Visibility = Windows.Visibility.Visible
+         PauseBtn.Visibility = Windows.Visibility.Visible
          ResetBtn.Visibility = Windows.Visibility.Visible
          ScrapsBtn.Visibility = Windows.Visibility.Hidden
       End If
-      ' Abilitazione bottone modifica
-      ModifyBtn.IsEnabled = m_SplitPage.m_bShow
-      ' gestione abilitazione altri bottoni
-      EnableButtons()
+   End Sub
+
+   Private Sub SetAuxTabInCurrDisposition()
+      ' Se movimento pezzi finale, sistemazioni per tavolo ausiliario
+      m_nAuxTabId = EgtGetTableId(AUX_TAB)
+      ' Visualizzo tavolo ausiliario
+      Dim bOldEnMod As Boolean = EgtGetEnableModified()
+      If bOldEnMod Then EgtDisableModified()
+      EgtSetStatus(m_nAuxTabId, GDB_ST.ON_)
+      If bOldEnMod Then EgtEnableModified()
+      ' Se definizione movimenti
+      If Not m_SplitPage.m_bShow Then
+         ' Area tavolo ausiliario
+         Dim b3AuxTab As New BBox3d
+         EgtGetBBoxGlob(EgtGetFirstNameInGroup(m_nAuxTabId, "A1"), GDB_BB.STANDARD, b3AuxTab)
+         ' Area tavolo principale
+         Dim b3Tab As New BBox3d
+         EgtGetTableArea(1, b3Tab)
+         ' Imposto offset su tavolo principale per includere anche il secondario
+         Dim dOffsXP As Double = Math.Max(b3AuxTab.Max().x - b3Tab.Max().x, 0)
+         Dim dOffsYP As Double = Math.Max(b3AuxTab.Max().y - b3Tab.Max().y, 0)
+         Dim dOffsXM As Double = Math.Max(b3Tab.Min().x - b3AuxTab.Min().x, 0)
+         Dim dOffsYM As Double = Math.Max(b3Tab.Min().y - b3AuxTab.Min().y, 0)
+         EgtSetTableAreaOffset(dOffsXP, dOffsYP, dOffsXM, dOffsYM)
+      End If
+      EgtZoom(ZM.ALL)
+
    End Sub
 
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
@@ -266,7 +331,7 @@ Public Class MoveRawPartPage
             ' Se il pezzo corrente è selezionato allora lo disattivo -> deposito del pezzo
             If nStat = GDB_ST.SEL Then
                EgtSetStatus(nId, GDB_ST.ON_)
-               ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola
+               ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola (evito il controllo se ultima fase)
                If VerifyCollisionWithOtherRawPart(nId) Then
                   ' mantengo la selezione del pezzo
                   EgtSetStatus(nId, GDB_ST.SEL)
@@ -302,9 +367,9 @@ Public Class MoveRawPartPage
                   MaxDoublePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_DOUBLEPLUGGER, MaxDoublePlugger, m_MainWindow.GetMachIniFile())
                   Dim AverageDensity As Double = 2700
                   AverageDensity = GetPrivateProfileDouble(S_MATERIALS, K_AVERAGEDENSITY, AverageDensity, m_MainWindow.GetMachIniFile())
-                  VacuumCups.GetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
-                  VacuumCups.GetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
-                  VacuumCups.GetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
+                  VacuumCups.SetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
+                  VacuumCups.SetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
+                  VacuumCups.SetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
                   If PutVacuumCupsOnRaw(nId, rmData) Then
                      ' Visualizzo le ventose
                      EgtSetStatus(GetVacuumId(), GDB_ST.ON_)
@@ -347,6 +412,8 @@ Public Class MoveRawPartPage
 
    ' Veririfica che il grezzo non entri in colliosione con altri pezzi 
    Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer) As Boolean
+      ' se movimento su tavola di scarico non eseguo il controllo (evito di segnalre errori per pezzi ricavati interni al grezzo...)
+      If m_SplitPage.m_bOnAuxTab Then Return False
       If nIdOnVacumm = GDB_ID.NULL Then Return False
       ' Creo gruppo temporaneo in cui generare le superfici per la veririfica di collisione
       Dim m_nTempId As Integer = EgtCreateGroup(GDB_ID.ROOT)
@@ -419,7 +486,7 @@ Public Class MoveRawPartPage
             If EgtMoveRawPart(nRawId, dMove * m_vtDir) Then
                m_dCurrDist += Math.Abs(dMove)
             End If
-         ' Altrimenti movimento Y +
+            ' Altrimenti movimento Y +
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, m_dStep, 0)
@@ -462,7 +529,7 @@ Public Class MoveRawPartPage
             If EgtMoveRawPart(nRawId, dMove * m_vtDir) Then
                m_dCurrDist -= Math.Abs(dMove)
             End If
-         ' Altrimenti movimento Y -
+            ' Altrimenti movimento Y -
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, -m_dStep, 0)
@@ -754,6 +821,33 @@ Public Class MoveRawPartPage
       End While
    End Sub
 
+   ' Passo dalla pagina di movimento dei pezzi alla pagina di scarico
+   Private Sub UnloadPartBtn_Click() Handles UnloadPartsBtn.Click
+      ' forzo lo stato di scarico frontale oppure di movimento
+      m_SplitPage.m_bOnAuxTab = Not m_SplitPage.m_bOnAuxTab
+
+      ' se rientro nella fase di spostamenti allora nascondo la tavola di scarico
+      If Not m_SplitPage.m_bOnAuxTab Then
+         ' se ci sono pezzi sulla tavola di scarico non posso nasconderla
+         Dim LclLstOfUnldPart As New List(Of Integer)
+         If Not PartOnAuxTab(LclLstOfUnldPart, m_nCurrPhase) Then
+            EgtDisableModified()
+            ' nascondo la tavola di scarico
+            EgtSetStatus(m_nAuxTabId, GDB_ST.OFF)
+            ' Nascondo eventuali pezzi in parcheggio
+            HideParkedParts()
+            EgtEnableModified()
+         End If
+      Else
+         ' Assegnazione delle info tavola ausiliaria alla dispozione corrente
+         SetAuxTabInCurrDisposition()
+      End If
+
+      ' Mantengo la fase che è stata creata e passo a gestire solo la visualizzazione dei bottoni
+      RefreshVisibility()
+      EgtZoom(ZM.ALL, True)
+   End Sub
+
    Private Sub StepMoveTxBx_EgtClosed(sender As Object, e As EventArgs) Handles StepMoveTxBx.EgtClosed
       Dim dStep As Double
       If StringToLen(StepMoveTxBx.Text, dStep) Then
@@ -795,30 +889,34 @@ Public Class MoveRawPartPage
       Dim ptRef As Point3d
       If Not EgtGetInfo(nRefId, "Pos", ptRef) Then Return
       Dim sCorn As String = ""
-      EgtGetInfo( nRefId, "COR", sCorn)
-      Select sCorn
-      Case "TL"
-         nCorn = MCH_CR.TL
-      Case "TR"
-         nCorn = MCH_CR.TR
-      Case "BL"
-         nCorn = MCH_CR.BL
-      Case "BR"
-         nCorn = MCH_CR.BR
+      EgtGetInfo(nRefId, "COR", sCorn)
+      Select Case sCorn
+         Case "TL"
+            nCorn = MCH_CR.TL
+         Case "TR"
+            nCorn = MCH_CR.TR
+         Case "BL"
+            nCorn = MCH_CR.BL
+         Case "BR"
+            nCorn = MCH_CR.BR
       End Select
       ' Recupero il centro del grezzo
       Dim ptRawCen As Point3d
       EgtGetRawPartCenter(nRawId, ptRawCen)
       ' Sposto il grezzo in battuta sul corner
       Dim dAngRaw As Double = 0
+      Dim dNewAngRot As Double = 0
 
       Dim AngRotList As New List(Of Double)
 
       ' ricavo l'angolo di posizionamento del grezzo/pezzo sulla tavola
       If Not DispositionRawOnTable(nRawId, dAngRaw, AngRotList) Then Return
+      Dim bb3dRaw As New BBox3d
+      EgtGetRawPartBBox(nRawId, bb3dRaw)
+      Dim ForceToRotate As Boolean = bb3dRaw.DimX < bb3dRaw.DimY
 
       ' provo a verificare di poter depositare il pezzo (senza applicare delle rotazioni)
-      If Not EgtMoveToCornerRawPart(nRawId, ptRef, nCorn) Then
+      If Not EgtMoveToCornerRawPart(nRawId, ptRef, nCorn) Or ForceToRotate Then
          ' se sono impostati degli step di rotazione
          If AngRotList.Count > 0 Then
             Dim bOkRotate As Boolean = False
@@ -838,12 +936,26 @@ Public Class MoveRawPartPage
             Next
             If Not bOkRotate Then Return
          Else
-            If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), -dAngRaw) Then
+            ' sposto il pezzo in centro tavola → perchè tutti i movimenti sono fatti ruotando il pezzo in centro tavola!
+            Dim b3Area As New BBox3d
+            EgtGetTableArea(1, b3Area)
+            Dim b3RawTemp As New BBox3d
+            EgtGetRawPartBBox(nRawId, b3RawTemp)
+            ' ricavo il riferimento dell'angolo in basso a sinstra del grezzo rispetto alla tavola
+            Dim ptCorner As Point3d = New Point3d(b3Area.DimX / 2, b3Area.DimY / 2, 0) - New Vector3d(b3RawTemp.DimX / 2, b3RawTemp.DimY / 2, 0)
+            ' sposto il pezzo in questa posizione
+            EgtMoveToCornerRawPart(nRawId, ptCorner, MCH_CR.BL)
+            ' riprovo il movimento
+            dNewAngRot = GetPrefRotAng(dAngRaw)
+            'dNewAngRot = DeltaAngC
+            If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dNewAngRot) Then
                If Not EgtMoveToCornerRawPart(nRawId, ptRef, nCorn) Then
                   ' riposiziono il pezzo come era prima
-                  EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAngRaw)
+                  EgtRotateRawPart(nRawId, Vector3d.Z_AX(), -dAngRaw)
+                  EgtDraw()
                   Return
                End If
+               dAngRaw = dNewAngRot
             Else
                Return
             End If
@@ -869,17 +981,18 @@ Public Class MoveRawPartPage
          End If
          nOtherRaw = EgtGetNextRawPart(nOtherRaw)
       End While
+
       ' Determino il movimento effettuato
       Dim ptNewRawCen As Point3d
       EgtGetRawPartCenter(nRawId, ptNewRawCen)
       ' Se tutto bene, aggiorno lista movimenti
       If bRawOk Then
          AddRawMoveData(nRawId, ptNewRawCen - ptRawCen, m_RawMoveDataList)
-         If dAngRaw <> 0 Then AddRawMoveData(nRawId, -dAngRaw, m_RawMoveDataList)
+         If dAngRaw <> 0 Then AddRawMoveData(nRawId, dAngRaw, m_RawMoveDataList)
          ' altrimenti annullo il movimento
       Else
          EgtMoveRawPart(nRawId, ptRawCen - ptNewRawCen)
-         EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAngRaw)
+         EgtRotateRawPart(nRawId, Vector3d.Z_AX(), -dAngRaw)
          m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 3))    ' Posizione scelta già occupata
       End If
       ' Disabilito pezzo e nascondo le ventose
@@ -952,6 +1065,137 @@ Public Class MoveRawPartPage
       Return True
    End Function
 
+   ' determino la migliore rotazione per portare il pezzo in orizzontale
+   Private Function GetPrefRotAng(ByVal dAngDeg As Double) As Double
+      Dim dNewAngDeg As Double = -dAngDeg
+      If dAngDeg > 90 And dAngDeg < 270 Then
+         dNewAngDeg = 180 - dAngDeg
+      End If
+      Return dNewAngDeg
+   End Function
+
+   Private Sub PauseBtn_Click(sender As Object, e As RoutedEventArgs) Handles PauseBtn.Click
+      ' verifico la presenza di eventuali pezzi sulla tavola di scarico
+      Dim LclLstOfUnldPart As New List(Of Integer)
+      PartOnAuxTab(LclLstOfUnldPart, m_nCurrPhase)
+      If Not InsertPauseInCurrPhase() Then Return
+      AddNewPhase()
+   End Sub
+
+   ' restituisce la lista dei pezzi che sono sulla tavola di scarico nella fase indicata
+   Private Function PartOnAuxTab(ByRef ListOfUnloadedPatr As List(Of Integer), nPhase As Integer) As Boolean
+      m_IsCurrPhaseUnloaded = False
+      ' Area tavolo ausiliario
+      Dim b3AuxTab As New BBox3d
+      EgtGetBBoxGlob(EgtGetFirstNameInGroup(m_nAuxTabId, "A1"), GDB_BB.STANDARD, b3AuxTab)
+      ' Area pezzi 
+      Dim nOtherRaw As Integer = EgtGetFirstRawPart()
+      While nOtherRaw <> GDB_ID.NULL
+         If EgtVerifyRawPartPhase(nOtherRaw, nPhase) Then
+            Dim b3OtherRaw As New BBox3d
+            ' EgtGetRawPartBBox(nOtherRaw, b3OtherRaw)
+            EgtGetBBoxGlob(nOtherRaw, GDB_BB.STANDARD, b3OtherRaw)
+            ' se il centro del pezzo è sulla tavola di scarico
+            If b3OtherRaw.Center.y < b3AuxTab.Max().y Then
+               m_IsCurrPhaseUnloaded = True
+               ListOfUnloadedPatr.Add(nOtherRaw)
+               ' salvo l'info che indica che il pezzo deve essere scaricato
+               EgtSetInfo(nOtherRaw, "Unloaded", 1)
+               'Exit While
+            End If
+         End If
+         nOtherRaw = EgtGetNextRawPart(nOtherRaw)
+      End While
+      Return m_IsCurrPhaseUnloaded
+   End Function
+
+   ' inserisce una pausa nella fase corrente
+   Private Function InsertPauseInCurrPhase() As Boolean
+      ' verifico che ci sia almeno un elemto selezionato (dati di aggancio pezzo)
+      If m_RawMoveDataList.Count = 0 Then Return False
+      ' verifico che sia stato inseito almeno uno spostamento, altrimenti lo rimuovo
+      Dim Index As Integer = 0
+      For Index = m_RawMoveDataList.Count - 1 To 0 Step -1
+         If Math.Abs(m_RawMoveDataList(Index).m_vtRawMove.x) < EPS_SMALL AndAlso Math.Abs(m_RawMoveDataList(Index).m_vtRawMove.y) < EPS_SMALL Then
+            m_RawMoveDataList.RemoveAt(Index)
+         End If
+      Next
+      ' verifico che la lista non sia vuota
+      If m_RawMoveDataList.Count = 0 Then
+         Return False
+      End If
+      ' recupero disposizione fase corrente
+      Dim nDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+      ' imposto la pausa nella disposizione corrente
+      SetPause(nDispId)
+      ' aggiungo al gruppo disposizione dei sottogruppi con i dati di movimento dei grezzi spostati
+      SaveMoveInfoInDisposition(nDispId, m_RawMoveDataList)
+      ' imposto eventuale movimento pezzi su tavola ausiliaria
+      SaveMovePartsOnAuxTable(nDispId, m_IsCurrPhaseUnloaded)
+      ' SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)
+      '' Eseguo calcolo speciale dei movimenti: per tavola multicut
+      'SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
+      SaveRemoveByHandInDisposition(nDispId, False)
+      Return True
+   End Function
+
+   ' crea una nuvoa fase/disposizione, la rende corrente, ricalcolo i grezzi e le lavorazioni della nuova fase
+   Private Function AddNewPhase() As Boolean
+      ' Creo nuova fase
+      Dim nNewPhase As Integer = EgtAddPhase()
+      ' Carico i grezzi rimasti sulla tavola nella nuova fase
+      ChangePhaseRawPart(nNewPhase)
+      ' Sposto le lavorazioni rimaste nella nuova fase
+      ChangeOperationPhase(nNewPhase)
+
+      Dim nCurrDisposition As Integer = EgtGetPhaseDisposition(nNewPhase)
+      'SetPause(nCurrDisposition)
+      m_nCurrDisposition = nCurrDisposition
+      ' EgtSetStatus(nRawIdSlected, GDB_ST.OFF)
+      EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+      EgtSetCurrPhase(nNewPhase)
+      SetAuxTabInCurrDisposition()
+      ' ripulisco la lista degli spostamenti
+      m_RawMoveDataList.Clear()
+      m_IsCurrPhaseUnloaded = False
+      ' aggiorno la fase corrente
+      m_nCurrPhase = EgtGetCurrPhase()
+      Return True
+   End Function
+
+   ' Copio i grezzi rimasti sulla tavola nella fase successiva
+   Private Sub ChangePhaseRawPart(ByVal nNewPhase As Integer)
+      ' recupero l'elenco dei pezzi che sono stati scaricati sulla tavola
+      Dim LocalLstOfUnldPart As New List(Of Integer)
+      PartOnAuxTab(LocalLstOfUnldPart, nNewPhase - 1)
+      ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
+      Dim nRawId As Integer = EgtGetFirstRawPart()
+      While nRawId <> GDB_ID.NULL
+         ' se il grezzo è presente nella fase precedente e non è quello selezionato allora procedo a creare una copia nella nuova fase
+         If EgtVerifyRawPartPhase(nRawId, nNewPhase - 1) Then
+            Dim bKeepRawPart As Boolean = True
+            For Each RawOnAuxTabData As RawMoveData In m_RawMoveDataList
+               If nRawId = RawOnAuxTabData.m_nId Then
+                  ' se il pezzo è stato scaricato allora non deve essere riportato nella fase successiva
+                  For Each UnloadPart As Integer In LocalLstOfUnldPart
+                     If nRawId = UnloadPart Then
+                        ' salvo l'info che indica che il pezzo deve essere scaricato
+                        EgtSetInfo(nRawId, "Unloaded", 1)
+                        bKeepRawPart = False
+                        Exit For
+                     End If
+                  Next
+                  'bKeepRawPart = False
+                  Exit For
+               End If
+            Next
+            If bKeepRawPart Then EgtKeepRawPart(nRawId, nNewPhase - 1)
+         End If
+         ' passo al successivo grezzo
+         nRawId = EgtGetNextRawPart(nRawId)
+      End While
+   End Sub
+
    Private Sub ResetBtn_Click(sender As Object, e As RoutedEventArgs) Handles ResetBtn.Click
       ' Recupero il primo grezzo selezionato
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
@@ -965,6 +1209,8 @@ Public Class MoveRawPartPage
       EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAngRaw)
       AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
       RemoveRawMoveData(nRawId, m_RawMoveDataList)
+      ' elimino l'info che indica che il pezzo è scaricato sulla tavola
+      EgtRemoveInfo(nRawId, "Unloaded")
       ' Disabilito pezzo e nascondo le ventose
       EgtSetStatus(nRawId, GDB_ST.ON_)
       EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
@@ -987,7 +1233,38 @@ Public Class MoveRawPartPage
       EgtDeselectAll()
       ' Torno alla fase precedente
       m_bPrev = True
-      ' Passo alla pagina delle spezzature
+      ' Passo alla pagina delle spezzature solo se non esiste prima una fased di deposito sulla tavola di scarico
+
+      Dim nPrevDispId As Integer = EgtGetPrevOperation(m_nCurrDisposition)
+      ' verifico se la fasa precedente è di tipo scarico
+      If IsDispUnloadOnAuxTab(nPrevDispId) <> 0 Then
+         EgtSetCurrPhase(m_nCurrPhase - 1)
+         m_nCurrDisposition = nPrevDispId
+         m_nCurrPhase -= 1
+         m_bPrev = False
+         m_SplitPage.m_bShow = True
+         m_SplitPage.m_bOnAuxTab = True
+         ' imposto la visibilità della tavola ausiliaria
+         SetAuxTabInCurrDisposition()
+         ' carico le info di disposizione dei pezzi
+         m_RawMoveDataList.Clear()
+         m_bRemovedRaw = GetRemoveByHandInDisposition(m_nCurrDisposition)
+         GetMoveInfoInDisposition(m_nCurrDisposition, m_RawMoveDataList)
+         RefreshVisibility()
+         EgtDraw()
+         Return
+      End If
+
+      'If EgtGetOperationType(EgtGetPrevOperation(m_nCurrDisposition)) = MCH_OY.DISP AndAlso m_SplitPage.m_bOnAuxTab Then
+      '   EgtSetCurrPhase(m_nCurrPhase - 1)
+      '   m_nCurrDisposition = EgtGetPrevOperation(m_nCurrDisposition)
+      '   m_nCurrPhase -= 1
+      '   m_bPrev = False
+      '   m_SplitPage.m_bShow = True
+      '   EgtDraw()
+      '   Return
+      'End If
+
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(Me)
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_SplitPage)
       m_MainWindow.m_CadCutPageUC.m_CadCutMode = CadCutPageUC.CadCutModes.Split
@@ -1003,6 +1280,54 @@ Public Class MoveRawPartPage
          ' non cambio pagina
          Return
       End If
+
+      ' ------- VISUALIZZAZIONE -------
+      If m_SplitPage.m_bShow Then
+         ' verifico se la fase successiva è uno scarico frontale
+         If NextOperationIsUnloading(m_nCurrDisposition) Then
+            ' imposto la nuova fase (che è stata modificata all'interno della funzione di controllo)
+            EgtSetCurrPhase(m_nCurrPhase)
+            ' carico i dati di movimento dei pezzi nella fase corrente
+            m_RawMoveDataList.Clear()
+            m_bRemovedRaw = GetRemoveByHandInDisposition(m_nCurrDisposition)
+            GetMoveInfoInDisposition(m_nCurrDisposition, m_RawMoveDataList)
+            EgtDraw()
+            EnableButtons()
+            Return
+         ElseIf IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 AndAlso Not NextOperationIsUnloading(m_nCurrDisposition) Then
+            ' imposto la nuova fase, al termine della Sub verrà caricata la pagina Split nella fase indicata ora
+            m_bToNext = True
+            m_nCurrPhase += 1
+            EgtSetCurrPhase(m_nCurrPhase)
+            EgtDraw()
+         End If
+      End If
+
+      ' -------     MODIFICA    -------
+      If Not m_SplitPage.m_bShow Then
+         ' se la tavola di scarico presente oppure ci sono pezzi sulla tavola di scarico
+         Dim LclLstOfUnldPart As New List(Of Integer)
+         If m_SplitPage.m_bOnAuxTab Or PartOnAuxTab(LclLstOfUnldPart, m_nCurrPhase) Then
+            ' se ci sono pezzi sulla tavola di scarico prima di procedere inserisco una pausa e creo una nuoava fase
+            If m_IsCurrPhaseUnloaded AndAlso InsertPauseInCurrPhase() Then AddNewPhase()
+            ' nascondo la tavola di scarico
+            EgtDisableModified()
+            EgtSetStatus(m_nAuxTabId, GDB_ST.OFF)
+            EgtEnableModified()
+         End If
+         m_bToNext = True
+         '' se la disposizione corrente è sulla tavola ausiliaria allora lo sarà anche quella successiva
+         'If IsDispUnloadOnAuxTab(m_nCurrDisposition) <> 0 Then
+         '   EgtSetCurrPhase(m_nCurrPhase + 1)
+         '   m_nCurrDisposition = EgtGetNextOperation(m_nCurrDisposition)
+         '   m_nCurrPhase += 1
+         '   m_bToNext = False
+         '   m_SplitPage.m_bShow = True
+         '   EgtDraw()
+         '   EnableButtons()
+         '   Return
+         'End If
+      End If
       ' resetto l'inidice del pezzo da mnovimentare
       m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
@@ -1045,10 +1370,44 @@ Public Class MoveRawPartPage
       ' disabilito bottone
       ModifyBtn.IsEnabled = False
       ' gestione abilitazione altri bottoni
-      EnableButtons()
+      EnableButtons(MachiningList.Count > 0)
    End Sub
 
-   Private Sub EnableButtons()
+   ' verifica se la disposizione indicata è uno scarico sulla tavola ausiliaria
+   Public Function IsDispUnloadOnAuxTab(nCurrDispId As Integer) As Integer
+      ' verifico se la fase precedente è uno scarico su tavola ausiliaria
+      Dim bVal As Integer = 0
+      EgtGetInfo(nCurrDispId, "Pat", bVal)
+      Return bVal
+   End Function
+
+   ' restituisce e attiva la successiva disposizione se è uno scarico frontale
+   Public Function NextOperationIsUnloading(nCurrDispId As Integer) As Boolean
+      ' recupero la primo operazione successiva
+      Dim nNextIdOperation As Integer = EgtGetNextOperation(nCurrDispId)
+      ' a partire da questa cerco la prima disposizione disponibile
+      Dim nNextIdDips As Integer = GetNextDisposition(nNextIdOperation)
+      If nNextIdDips = nNextIdOperation And IsDispUnloadOnAuxTab(nNextIdOperation) Then
+         m_nCurrPhase += 1
+         m_nCurrDisposition = nNextIdOperation
+         Return True
+      End If
+      Return False
+   End Function
+
+   ' recupero la prima disposizione disponibile tra l'elenco delle operazioni presenti
+   Public Function GetNextDisposition(nCurrDisposId As Integer) As Integer
+      Dim nDispId As Integer = nCurrDisposId
+      While nDispId <> GDB_ID.NULL
+         If EgtGetOperationType(nDispId) = MCH_OY.DISP Then
+            Return nDispId
+         End If
+         nDispId = EgtGetNextOperation(nDispId)
+      End While
+      Return GDB_ID.NULL
+   End Function
+
+   Private Sub EnableButtons(Optional bExistsMachining As Boolean = False)
       UpBtn.IsEnabled = Not m_SplitPage.m_bShow
       LeftBtn.IsEnabled = Not m_SplitPage.m_bShow
       RightBtn.IsEnabled = Not m_SplitPage.m_bShow
@@ -1062,12 +1421,38 @@ Public Class MoveRawPartPage
       TopRBtn.IsEnabled = Not m_SplitPage.m_bShow
       BottomLBtn.IsEnabled = Not m_SplitPage.m_bShow
       BottomRBtn.IsEnabled = Not m_SplitPage.m_bShow
+      PauseBtn.IsEnabled = Not m_SplitPage.m_bShow
       ResetBtn.IsEnabled = Not m_SplitPage.m_bShow
-      NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
-      ScrapsBtn.IsEnabled = Not m_SplitPage.m_bShow
+      UnloadPartsBtn.IsEnabled = Not m_SplitPage.m_bShow
+      If m_SplitPage.m_bShow Then
+         NextBtn.IsEnabled = (m_nCurrPhase < EgtGetPhaseCount())
+      Else
+         ' Se esistono delle lavorazioni allora abilito il pulsante per procedere
+         If Not bExistsMachining Then
+            NextBtn.IsEnabled = Not m_SplitPage.m_bOnAuxTab
+         Else
+            NextBtn.IsEnabled = True
+         End If
+
+      End If
    End Sub
 
+   ' esco dalla pagina di scarico
    Private Sub MoveRawPartPage_Unloaded(sender As Object, e As EventArgs) Handles Me.Unloaded
+      ' verifico che la fase corrente non sia vuota
+      Dim nLastDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+
+      '' se sono in visualizzazione allora non elimino essuna operazione
+      'If Not m_SplitPage.m_bShow Then
+      '   If EgtIsOperationEmpty(nLastDispId) And Not m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
+      '      EgtErase(nLastDispId)
+      '   ElseIf EgtIsOperationEmpty(nLastDispId) And m_SplitPage.m_bOnAuxTab And m_RawMoveDataList.Count = 0 Then
+      '      ' Dichiaro pagina non attiva
+      '      m_bActive = False
+      '      Return
+      '   End If
+      'End If
+
       ' Se movimento con ventose
       If Not m_bByHand Then
          ' nascondo le ventose
@@ -1082,12 +1467,13 @@ Public Class MoveRawPartPage
             SaveMoveInfoInDisposition(nDispId, m_RawMoveDataList)
             ' imposto eventuale presenza rimozioni manuali
             SaveRemoveByHandInDisposition(nDispId, m_bRemovedRaw)
-            ' imposto eventuale movimento pezzi su tavola ausiliaria
-            SaveMovePartsOnAuxTable( nDispId, m_SplitPage.m_bOnAuxTab)
+            ' imposto eventuale movimento pezzi su tavola ausiliaria (se è realmente avvenuto)
+            'SaveMovePartsOnAuxTable(nDispId, m_SplitPage.m_bOnAuxTab)            
+            SaveMovePartsOnAuxTable(nDispId, m_IsCurrPhaseUnloaded)
             ' Eseguo calcolo speciale dei movimenti
             SpecialApplyDisposition(nDispId, True, Not m_SplitPage.m_bOnAuxTab)
          End If
-      ' se altrimenti movimento senza ventose perchè lama troppo grande
+         ' se altrimenti movimento senza ventose perchè lama troppo grande
       ElseIf GetVacuumType() > 0 Then
          ' se non solo visualizzazione
          If Not m_SplitPage.m_bShow Then
@@ -1099,13 +1485,18 @@ Public Class MoveRawPartPage
             SpecialApplyDisposition(nDispId, True)
          End If
       End If
+
       ' Nascondo eventuale tavola ausiliaria
       If m_SplitPage.m_bOnAuxTab Then
          EgtDisableModified()
          EgtSetStatus(m_nAuxTabId, GDB_ST.OFF)
          EgtEnableModified()
-         EgtZoom(ZM.ALL, False)
-         If Not m_bPrev Then
+         ' se sto uscendo dalla pagina delle spezzature
+         If Not m_bPrev And Not m_bToNext Then
+            Dim nDispId As Integer = EgtGetPhaseDisposition(m_nCurrPhase)
+            ' se sto uscendo dalla pagina split (senza passare dal comando next) 
+            Dim lclLstUnlPart As New List(Of Integer)
+            SaveMovePartsOnAuxTable(nDispId, PartOnAuxTab(lclLstUnlPart, m_nCurrPhase))
             ' Cancello eventuale manipolatore pezzi
             EgtDisableModified()
             RemoveVacuumCups()
@@ -1122,10 +1513,30 @@ Public Class MoveRawPartPage
          m_bPrev = False
          m_SplitPage.m_bShow = True
       End If
+
+      Dim Ph As Integer = EgtGetCurrPhase()
+      ' aggiorno il disegno
+      EgtZoom(ZM.ALL, False)
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
 
+   ' ----------------- TEST funzione per debug operazioni  -----------------
+   Private Sub SaveMyFileTest(sFilename As String)
+      LoadCurrPhaseMachining()
+      ' salvo il file corrente per poterlo studiare e capire cosa è successo nella rappresentazione dei grezzi
+      EgtSaveFile("C:\EgtData\OmagCUT\MyProjects\" & sFilename & ".nge", NGE.BIN)
+   End Sub
+
+   Private Sub LoadCurrPhaseMachining()
+      Dim m_MachiningList As New List(Of SplitMach)
+      'm_SplitPage.ShowMachiningList()
+      'm_SplitPage.SaveOrderMachinig(m_nCurrPhase)
+      ' Preparo la lista delle lavorazioni
+      CalculateSplitMachList(m_nCurrPhase, m_MachiningList)
+      Dim b As Boolean = False
+   End Sub
+
 End Class
 
 

CadCuts/NestPageUC.xaml

@@ -8,7 +8,7 @@
    d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="NestPage_Initialized" Loaded="NestPage_Loaded" Unloaded="NestPage_Unloaded">
       
    <!-- Definizione della NestPage -->
-   <Grid Name="NestPageGrid" >
+   <Grid Name="NestPageGrid">
       <Grid.ColumnDefinitions>
          <ColumnDefinition Width="3*"/>
          <ColumnDefinition Width="12*"/>
@@ -78,7 +78,7 @@
                <ColumnDefinition Width="Auto"/>
                <ColumnDefinition Width="Auto"/>
             </Grid.ColumnDefinitions>
-            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50"
+            <EgtWPFLib:EgtTextBox Name="RotationAngleTxBx"  Width="50" IsLength="False"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             <TextBlock Grid.Column="1" FontSize="30" Margin="2,-5,0,0"
                Text="°"/>

CadCuts/NestPageUC.xaml.vb

@@ -62,6 +62,14 @@ Public Class NestPageUC
    Private m_bMaximizeMove As Boolean = False
    Private m_dAngStep As Double = 0
    Private m_bReducedCut As Boolean = False
+
+   Private m_bKeyCtrlPressed As Boolean = False
+   Private m_bKeyLeftShiftPressed As Boolean = False
+   Private m_dAngTotal As Double = 0
+   Private m_dStartAng As Double = 0
+   Private m_bStartRot As Boolean = False
+   Private m_bStartMove As Boolean = False
+
    ' Dati per tolleranza spessore Trf
    Private m_dTrfThickTolerance As Double = 0
    ' Dati movimento registrazione grezzo
@@ -94,6 +102,7 @@ Public Class NestPageUC
       RemovePartBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 3)            'Remove part - Elimina pezzo
       SelectAllBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 4)             'Select All - Seleziona Tutto
       DeselectAllBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 5)           'Deselect All - Deseleziona Tutto
+      DragRettanleBtn.ToolTip = "Strech"
 
       Dim nColumsIn_UG1 As Integer = 2
       ' gestisco la visualizzazione del comando PAN (per il drag dei rettangoli)
@@ -1053,7 +1062,9 @@ Public Class NestPageUC
       m_locPrev = e.Location
       m_bDrag = m_bDrag AndAlso EgtUnProjectPoint(e.Location, m_ptPrev)
       m_bDragToStart = m_bDrag
+      ' attivo la modalità di traslazione e rotazione senza cltrollo collisioni (solo in fase di Drag)
       m_bVerify = m_bDrag AndAlso (Keyboard.Modifiers And ModifierKeys.Shift) > 0
+      m_bKeyLeftShiftPressed = m_bVerify
       m_vtTotMove = Vector3d.NULL()
    End Sub
 
@@ -1116,51 +1127,114 @@ Public Class NestPageUC
          m_bVerify = True
          m_bFromParking = True
       End If
+
       ' Inizio esecuzione di drag
       m_bDragging = True
       ' Ricavo il punto corrente in coordinate mondo
       Dim ptCurr As Point3d
       EgtUnProjectPoint(e.Location, ptCurr)
-      ' Ricavo il vettore di movimento
-      Dim vtMove As Vector3d = ptCurr - m_ptPrev
-      ' Muovo i pezzi selezionati di quanto possibile
-      If vtMove.SqLen() > EPS_SMALL * EPS_SMALL Then
-         ' Se movimento con sola verifica finale
-         If m_bVerify Then
-            EgtMove(nMoveId, vtMove)
-            m_vtTotMove += vtMove
-            ' altrimenti caso con verifica durante il movimento
-         Else
-            ' Aggiorno regioni per nesting
-            UpdateNestRegions()
-            EnableReferenceRegion(False)
-            ' muovo il pezzo
-            EgtMovePart(nMoveId, m_bReducedCut, vtMove)
-            EgtSaveCollInfo()
-            ' se movimento risultante nullo, provo con movimento tangente
-            Dim bTgMoved As Boolean = False
-            If vtMove.IsSmall() Then
-               ' riprovo con movimento tangente
-               Dim vtTgMove As Vector3d = ptCurr - m_ptPrev
-               EgtTgMovePartOnCollision(nMoveId, m_bReducedCut, vtTgMove)
-               bTgMoved = (Not vtTgMove.IsSmall())
-            End If
-            ' se abilitato magnetico (allineamento + snap), lo provo
-            Dim bAlignMoved As Boolean = False
-            Dim bSnapMoved As Boolean = False
-            If m_bMagnetic Then
-               If Not GetLockOnRotation(nMoveId) Then
-                  EgtAlignPartOnCollision(nMoveId, m_bReducedCut, bAlignMoved)
-               End If
-               If m_dSnapDist > EPS_SMALL Then
-                  EgtRestoreCollInfo()
-                  EgtMovePartToSnapPointOnCollision(nMoveId, m_bReducedCut, m_dSnapDist, bSnapMoved)
-               End If
-            End If
-            m_CurrProjPage.ResetOrderMachiningFlag()
+
+      ' la rotazione è attivabile solo se premuto il tasto Ctrl (e non sono in parheggio)
+      m_bKeyCtrlPressed = m_bDrag AndAlso (Keyboard.Modifiers And ModifierKeys.Control) > 0
+
+      '-------------Inizio ROTAZIONE ----------------
+      If m_bKeyCtrlPressed AndAlso (Not m_bFromParking OrElse m_bKeyLeftShiftPressed) Then
+         ' Calcolo il centro di rotazione come centro del cluster
+         Dim ptCen As Point3d
+         If Not EgtGetPartPartClusterCenterGlob(nMoveId, ptCen) Then Return
+         ' definisco il vettore dal centro del pezzo alla posizione del cursore
+         Dim vtCurr As Vector3d = ptCurr - ptCen
+         Dim dLen, dHAng, dVAng As Double
+         ' recupero l'angolo orizzontale del vettore
+         vtCurr.ToSpherical(dLen, dHAng, dVAng)
+         If Not m_bStartRot Then
+            m_dAngTotal = 0
+            ' notifico una rotazione
+            m_bStartRot = True
+            m_dStartAng = dVAng
          End If
-         EgtDraw()
-         ' Eventuale notifica al VeinMatching
+         Dim dDeltaAng As Double = dVAng - m_dStartAng
+         ' gestione del passaggio da 0° → 360° evitando mantenendo la visualizzazione fluida       
+         If Math.Abs(dDeltaAng) > 90 Then
+            If m_dStartAng < 180 And dVAng > 180 Then
+               dDeltaAng = dVAng - 360 - m_dStartAng
+            ElseIf m_dStartAng > 180 And dVAng < 180 Then
+               dDeltaAng = dVAng - m_dStartAng + 360
+            End If
+         End If
+         ' Rotazione del pezzo attorno al suo centro
+         If Math.Abs(dDeltaAng) > EPS_ANG_SMALL Then
+            ' se il tasto Shift è premuto (disabilitato il controllo collisioni durante il Drag) 
+            If m_bKeyLeftShiftPressed Then
+               EgtRotate(nMoveId, ptCen, Vector3d.Z_AX(), dDeltaAng, GDB_RT.GLOB)
+               m_dAngTotal += dDeltaAng
+            Else
+               ' esegue la rotazione fino ad incontrare un altro pezzo
+               RotatePartInsideBond(dDeltaAng, nMoveId)
+               m_CurrProjPage.ResetOrderMachiningFlag()
+               ' Eventuale notifica al VeinMatching
+               Dim nId As Integer = EgtGetFirstSelectedObj()
+               While nId <> GDB_ID.NULL
+                  VeinMatching.OnMovePartInRaw(nId)
+                  nId = EgtGetNextSelectedObj()
+               End While
+            End If
+            m_dStartAng = dVAng
+         End If
+         '-------------Fine ROTAZIONE ----------------
+
+      Else
+         ' -------------Inizio TRASLAZIONE ---------------
+         ' Ricavo il vettore di movimento
+         Dim vtMove As Vector3d = ptCurr - m_ptPrev
+         ' Muovo i pezzi selezionati di quanto possibile
+         If vtMove.SqLen() > EPS_SMALL * EPS_SMALL Then
+            ' notifico una traslazione
+            If Not m_bStartMove Then
+               m_bStartMove = True
+            End If
+
+            ' Se movimento con sola verifica finale (disabilitato il controllo collisioni durante il Drag)
+            If m_bVerify Then
+               EgtMove(nMoveId, vtMove)
+               m_vtTotMove += vtMove
+               ' altrimenti caso con verifica durante il movimento
+            Else
+               ' Aggiorno regioni per nesting
+               UpdateNestRegions()
+               EnableReferenceRegion(False)
+               ' muovo il pezzo
+               EgtMovePart(nMoveId, m_bReducedCut, vtMove)
+               EgtSaveCollInfo()
+               ' se movimento risultante nullo, provo con movimento tangente
+               Dim bTgMoved As Boolean = False
+               If vtMove.IsSmall() Then
+                  ' riprovo con movimento tangente
+                  Dim vtTgMove As Vector3d = ptCurr - m_ptPrev
+                  EgtTgMovePartOnCollision(nMoveId, m_bReducedCut, vtTgMove)
+                  bTgMoved = (Not vtTgMove.IsSmall())
+               End If
+               ' se abilitato magnetico (allineamento + snap), lo provo
+               Dim bAlignMoved As Boolean = False
+               Dim bSnapMoved As Boolean = False
+               If m_bMagnetic Then
+                  If Not GetLockOnRotation(nMoveId) Then
+                     EgtAlignPartOnCollision(nMoveId, m_bReducedCut, bAlignMoved)
+                  End If
+                  If m_dSnapDist > EPS_SMALL Then
+                     EgtRestoreCollInfo()
+                     EgtMovePartToSnapPointOnCollision(nMoveId, m_bReducedCut, m_dSnapDist, bSnapMoved)
+                  End If
+               End If
+               m_CurrProjPage.ResetOrderMachiningFlag()
+            End If
+            ' -------------Fine TRASLAZIONE ---------------
+         End If
+      End If
+
+      EgtDraw()
+      ' Eventuale notifica al VeinMatching
+      If m_bStartMove OrElse m_bStartRot Then
          If nMoveId = GDB_ID.SEL Then
             Dim nId As Integer = EgtGetFirstSelectedObj()
             While nId <> GDB_ID.NULL
@@ -1171,10 +1245,15 @@ Public Class NestPageUC
             VeinMatching.OnMovePartInRaw(nMoveId)
          End If
       End If
+
       ' Aggiorno il punto precedente
       m_ptPrev = ptCurr
       ' Terminata esecuzione di drag
       m_bDragging = False
+      '' elimino il ponticello associato: nella vilualizzazione il percorso di lavorazioni non si muove! in attesa di gestione
+      'DeleteBridgeAssociated(nMoveId)
+      ' Resetto i ponticelli (per ora non sono in grado di muoverli assieme ai pezzi)
+      ResetAllBRidges()
    End Sub
 
    Private Sub OnMyMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseUpScene
@@ -1198,47 +1277,31 @@ Public Class NestPageUC
 
       ' Se eseguito drag
       If Not m_bDragToStart Then
-         ' Se movimento con sola verifica finale
-         If m_bVerify Then
-            ' Determino cosa verificare
-            Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
-            ' Aggiorno regioni per nesting
-            UpdateNestRegions()
-            EnableReferenceRegion(False)
-            ' Eseguo verifica
-            If VerifyTrfData(nMoveId) And EgtVerifyPart(nMoveId, m_bReducedCut) Then
-               m_CurrProjPage.ResetOrderMachiningFlag()
-               ' Non superata riporto alla posizione iniziale
+         ' Se movimento con sola verifica finale ----- TRASLAZIONE
+         If Not m_bStartRot And m_bStartMove Then
+            VerifyMove()
+            ' Se movimento con sola verifica finale ----- TRASLAZIONE + ROTAZIONE
+         ElseIf m_bStartRot And m_bStartMove Then
+            If Not m_bFromParking Then
+               VerifyRot()
             Else
-               If m_bFromParking Then
-                  m_CurrProjPage.ClearMessage()
-                  PreRemoveOnePart(nMoveId)
-                  VeinMatching.OnRemovePartFromRaw(nMoveId)
-               Else
-                  EgtMove(nMoveId, -m_vtTotMove)
-                  ' Eventuale notifica al VeinMatching
-                  If nMoveId = GDB_ID.SEL Then
-                     Dim nId As Integer = EgtGetFirstSelectedObj()
-                     While nId <> GDB_ID.NULL
-                        VeinMatching.OnMovePartInRaw(nId)
-                        nId = EgtGetNextSelectedObj()
-                     End While
-                  Else
-                     VeinMatching.OnMovePartInRaw(nMoveId)
-                  End If
-               End If
-               '---------------------- COUNTER PART ----------------------
-               Dim sRefGroup As String = String.Empty
-               If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
-                  ' accendo il layer che contiene il contatore (spento in fase di Drag)
-                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
-                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
-                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
-                  CountPartInFamily(sRefGroup)
-               End If
-               '---------------------- COUNTER PART ----------------------
+               ' forzo il reset delle info di rotazione
+               m_dStartAng = 0
+               m_dAngTotal = 0
+               m_bStartRot = False
+            End If
+            VerifyMove()
+            ' verifico se la posizione finale della rotazione è corretta ----- ROTAZIONE
+         ElseIf m_bStartRot And Not m_bStartMove Then
+            If m_bFromParking Then
+               VerifyMove()
+               ' forzo il reset delle info di rotazione
+               m_dStartAng = 0
+               m_dAngTotal = 0
+               m_bStartRot = False
+            Else
+               VerifyRot()
             End If
-            m_bFromParking = False
             ' altrimenti caso con verifica durante il movimento
          Else
             ' Basta reset alla fine
@@ -1290,8 +1353,8 @@ Public Class NestPageUC
          VeinMatching.OnDeselectPart(m_nIdToDesel)
       End If
 
-
       ' Reset
+      GetFamilyGroupInPark()
       m_bDrag = False
       m_nIdToSel = GDB_ID.NULL
       m_nIdToDesel = GDB_ID.NULL
@@ -1302,6 +1365,70 @@ Public Class NestPageUC
       EgtDraw()
    End Sub
 
+   Private Sub VerifyMove()
+      If m_bVerify Then
+         ' Determino cosa verificare
+         Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
+         ' Aggiorno regioni per nesting
+         UpdateNestRegions()
+         EnableReferenceRegion(False)
+         ' Eseguo verifica
+         If VerifyTrfData(nMoveId) And EgtVerifyPart(nMoveId, m_bReducedCut) Then
+            m_CurrProjPage.ResetOrderMachiningFlag()
+            ' Non superata riporto alla posizione iniziale
+         Else
+            If m_bFromParking Then
+               m_CurrProjPage.ClearMessage()
+               PreRemoveOnePart(nMoveId)
+               VeinMatching.OnRemovePartFromRaw(nMoveId)
+            Else
+               EgtMove(nMoveId, -m_vtTotMove)
+               ' Eventuale notifica al VeinMatching
+               If nMoveId = GDB_ID.SEL Then
+                  Dim nId As Integer = EgtGetFirstSelectedObj()
+                  While nId <> GDB_ID.NULL
+                     VeinMatching.OnMovePartInRaw(nId)
+                     nId = EgtGetNextSelectedObj()
+                  End While
+               Else
+                  VeinMatching.OnMovePartInRaw(nMoveId)
+               End If
+            End If
+            '---------------------- COUNTER PART ----------------------
+            ' solo se pezzo disposto in tavola
+            If m_bFromParking Then
+               Dim sRefGroup As String = String.Empty
+               If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
+                  ' accendo il layer che contiene il contatore (spento in fase di Drag)
+                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
+                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
+                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
+                  CountPartInFamily(sRefGroup)
+               End If
+            End If
+            '---------------------- COUNTER PART ----------------------
+         End If
+         m_bFromParking = False
+      End If
+   End Sub
+
+   Private Sub VerifyRot()
+      ' se comando Shift è stato attivato
+      If m_bKeyLeftShiftPressed Then
+         ' Determino cosa verificare
+         Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
+         If Not EgtVerifyPart(nMoveId, m_bReducedCut) Then
+            Dim ptCen As Point3d
+            If Not EgtGetPartPartClusterCenterGlob(nMoveId, ptCen) Then Return
+            EgtRotate(nMoveId, ptCen, Vector3d.Z_AX(), -m_dAngTotal, GDB_RT.GLOB)
+         End If
+      End If
+      ' resetto i valori 
+      m_dStartAng = 0
+      m_dAngTotal = 0
+      m_bStartRot = False
+   End Sub
+
    Friend Function SelectPart(nPartId As Integer, bNotifyVM As Boolean) As Boolean
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Determino se pezzo in tavola o in parcheggio
@@ -1573,7 +1700,7 @@ Public Class NestPageUC
       If m_nPartPos <> PART_POS.IN_TABLE Then
          Dim nId As Integer = EgtGetFirstSelectedObj()
          While nId <> GDB_ID.NULL
-            ' Se pezzo con rotazione libera
+            ' Se pezzo con rotazione libera (in parcheggio)
             If Not EgtExistsInfo(nId, INFO_PARTROT) Then
                ' Calcolo il centro di rotazione come centro del pezzo
                Dim ptCen As Point3d
@@ -1609,25 +1736,30 @@ Public Class NestPageUC
          Return True
          ' Altrimenti li ruoto tenendo conto delle collisioni
       Else
-         ' Verifico se ci sono dei pezzi bloccati in rotazione
-         Dim bLockedRot As Boolean = GetLockOnRotation(GDB_ID.SEL)
-         ' Se tutti i pezzi possono ruotare
-         If Not bLockedRot Then
-            ' Calcolo il centro di rotazione come centro del cluster
-            Dim ptCen As Point3d
-            If Not EgtGetPartPartClusterCenterGlob(GDB_ID.SEL, ptCen) Then Return False
-            ' Aggiorno regioni per nesting
-            UpdateNestRegions()
-            EnableReferenceRegion(False)
-            ' Verifico rotazione complessiva
-            EgtRotate(GDB_ID.SEL, ptCen, Vector3d.Z_AX(), dAngRotDeg, GDB_RT.GLOB)
-            If EgtVerifyPart(GDB_ID.SEL, m_bReducedCut) Then Return True
-            ' Provo rotazione parziale (dopo aver annullato la complessiva)
-            EgtRotate(GDB_ID.SEL, ptCen, Vector3d.Z_AX(), -dAngRotDeg, GDB_RT.GLOB)
-            Return EgtRotatePart(GDB_ID.SEL, m_bReducedCut, ptCen, dAngRotDeg)
-         Else
-            Return False
-         End If
+         Return RotatePartInsideBond(dAngRotDeg, GDB_ID.SEL)
+      End If
+   End Function
+
+   ' verifica che la rotazione sia ammessa
+   Private Function RotatePartInsideBond(dAngRotDeg As Double, nIdMove As Integer) As Boolean
+      ' Verifico se ci sono dei pezzi bloccati in rotazione
+      Dim bLockedRot As Boolean = GetLockOnRotation(nIdMove)
+      ' Se tutti i pezzi possono ruotare
+      If Not bLockedRot Then
+         ' Calcolo il centro di rotazione come centro del cluster
+         Dim ptCen As Point3d
+         If Not EgtGetPartPartClusterCenterGlob(nIdMove, ptCen) Then Return False
+         ' Aggiorno regioni per nesting
+         UpdateNestRegions()
+         EnableReferenceRegion(False)
+         ' Verifico rotazione complessiva
+         EgtRotate(nIdMove, ptCen, Vector3d.Z_AX(), dAngRotDeg, GDB_RT.GLOB)
+         If EgtVerifyPart(nIdMove, m_bReducedCut) Then Return True
+         ' Provo rotazione parziale (dopo aver annullato la complessiva)
+         EgtRotate(nIdMove, ptCen, Vector3d.Z_AX(), -dAngRotDeg, GDB_RT.GLOB)
+         Return EgtRotatePart(nIdMove, m_bReducedCut, ptCen, dAngRotDeg)
+      Else
+         Return False
       End If
    End Function
 
@@ -2310,6 +2442,11 @@ Public Class NestPageUC
       EgtZoom(ZM.ALL)
    End Sub
 
+   ' ripulisco la lista dei pezzi in parcheggio
+   Friend Sub ResetListOfGruopInPark()
+      m_ListOfGroupInPark.Clear()
+   End Sub
+
    Friend Function StoreOnePart(nId As Integer, Optional ByVal bForced As Boolean = False) As Boolean
       ' Se pezzo in grezzo, metto in parcheggio (sempre possibile)
       If bForced OrElse
@@ -2387,6 +2524,10 @@ Public Class NestPageUC
       Dim dEraseArea As Double = 0
       nId = EgtGetFirstSelectedObj()
       While nId <> GDB_ID.NULL
+         '' elimino eventuali ponticelli associati al pezzo: nella vilualizzazione il percorso di lavorazioni non si muove! in attesa di gestione
+         'DeleteBridgeAssociated(nId)
+         ' Resetto i ponticelli (per ora non sono in grado di muoverli assieme ai pezzi)
+         ResetAllBRidges()
          ' Recupero indice del successivo
          Dim nNextId = EgtGetNextSelectedObj()
          ' Se abilitata cancellazione in ogni caso o pezzo non da Csv
@@ -2432,6 +2573,47 @@ Public Class NestPageUC
       EgtZoom(ZM.ALL)
    End Sub
 
+   Private Sub DeleteBridgeAssociated(nMyId As Integer)
+      ' verifico se esistono dei ponticelli associati al pezzo indicato
+      ' recuoero il gruppo di lavorazione corrente
+      Dim nIdCurrMachGroup As Integer = EgtGetCurrMachGroup()
+      ' creo il gruppo per i ponticelli
+      Dim sNameGroup As String = BRIDGES
+      Dim nIdBridgesGroup As Integer = EgtGetFirstNameInGroup(nIdCurrMachGroup, sNameGroup)
+      If nIdBridgesGroup <> GDB_ID.NULL Then
+         ' carico la prima entità del gruppo BRIDGES
+         Dim nIdBridgeLine As Integer = GDB_ID.NULL
+         nIdBridgeLine = EgtGetFirstNameInGroup(nIdBridgesGroup, BRIDGELINE)
+         ' ciclo su tutte le entità
+         While nIdBridgeLine <> GDB_ID.NULL
+            Dim nNextBridgeLine As Integer = GDB_ID.NULL
+            Dim nIdPart As Integer = GDB_ID.NULL
+            If EgtGetInfo(nIdBridgeLine, "PartStart", nIdPart) Then
+               If nIdPart = nMyId Then
+                  nNextBridgeLine = EgtGetNext(nIdBridgeLine)
+                  ' il ponticello deve essere eliminato
+                  EgtErase(nIdBridgeLine)
+                  nIdBridgeLine = nNextBridgeLine
+                  ' riparto dall'inizio del ciclo
+                  Continue While
+               End If
+            End If
+            If EgtGetInfo(nIdBridgeLine, "PartEnd", nIdPart) Then
+               If nIdPart = nMyId Then
+                  nNextBridgeLine = EgtGetNext(nIdBridgeLine)
+                  ' il ponticello deve essere eliminato
+                  EgtErase(nIdBridgeLine)
+                  nIdBridgeLine = nNextBridgeLine
+                  ' riparto dall'inizio del ciclo
+                  Continue While
+               End If
+            End If
+            ' il BridgeLine corrente non contiene riferimeti al pezzo da eliminare
+            nIdBridgeLine = EgtGetNext(nIdBridgeLine)
+         End While
+      End If
+   End Sub
+
    Private Sub SelectAllBtn_Click(sender As Object, e As RoutedEventArgs) Handles SelectAllBtn.Click
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Numero dei pezzi in tavola

CadCuts/SplitAuto.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Forms.Integration
+Imports EgtUILib
 
 Public Module SplitAuto
 
@@ -98,14 +99,15 @@ Public Module SplitAuto
                   Mach.m_dStartFreeLen = FREELEN_INF + 1
                   Mach.m_dEndFreeLen = FREELEN_INF + 1
                   Dim nEntId, nSub As Integer
-                  If EgtGetMachiningGeometry( 0, nEntId, nSub) Then
-                     If EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse EgtGetType( nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
-                     Mach.m_bEnableInvert = GetEnableInvert( nEntId)
-                     EgtMidVector( nEntId, GDB_ID.ROOT, Mach.m_vtDir)
+                  If EgtGetMachiningGeometry(0, nEntId, nSub) Then
+                     ' EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse
+                     If EgtGetType(nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
+                     Mach.m_bEnableInvert = GetEnableInvert(nEntId)
+                     EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
                      If Mach.m_bInvert Then Mach.m_vtDir = -Mach.m_vtDir
                      Mach.m_nEntId = nEntId
                   End If
@@ -131,7 +133,7 @@ Public Module SplitAuto
                      Mach.m_bStartAll = False
                      Mach.m_bEndAll = False
                   End If
-               ' Waterjet
+                  ' Waterjet
                ElseIf Mach.m_nType = MCH_OY.WATERJETTING Then
                   Mach.m_nInterf = FMI_TYPE.NONE
                   ' recupero l'angolo di fianco
@@ -140,7 +142,7 @@ Public Module SplitAuto
                   Mach.m_bCanEndAll = False
                   Mach.m_bStartAll = False
                   Mach.m_bEndAll = False
-               ' Forature e fresature
+                  ' Forature e fresature
                Else
                   Mach.m_nInterf = FMI_TYPE.NONE
                   Mach.m_dSideAng = 0
@@ -155,7 +157,7 @@ Public Module SplitAuto
                Mach.m_bPause = GetPause(nOperId)
                ' inserisco in lista
                MachSplitList.Add(Mach)
-            ' altrimenti la disattivo
+               ' altrimenti la disattivo
             Else
                EgtSetOperationMode(nOperId, False)
             End If
@@ -193,7 +195,7 @@ Public Module SplitAuto
 
    Private Sub ColorSingleMachining(nOperId As Integer, sLay As String, dSideAng As Double, bEnabled As Boolean, nInterf As Integer)
       ' Verifico se è un taglio da sopra o da sotto
-      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or ( sLay = NAME_INLOOP AndAlso EgtExistsInfo( nOperId, INFO_FILOTOP)))
+      Dim bOnMach As Boolean = (sLay = NAME_ONPATH Or (sLay = NAME_INLOOP AndAlso EgtExistsInfo(nOperId, INFO_FILOTOP)))
       Dim bDrip As Boolean = (sLay = NAME_DRIPCUT Or sLay = NAME_UNDERDRILL)
       ' Recupero il preview della lavorazione
       Dim nPvId As Integer = GDB_ID.NULL
@@ -218,11 +220,11 @@ Public Module SplitAuto
             Next
             EgtSetColor(nDwnCutId, COL_MCH_DISABLED)
             Dim bFreeStart As Boolean = (nInterf And FMI_TYPE.LI) <> FMI_TYPE.LI
-            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
-            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nDwnPrcId, If(bFreeStart, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
             Dim bFreeEnd As Boolean = (nInterf And FMI_TYPE.LO) <> FMI_TYPE.LO
-            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
-            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED, COL_MCH_DIS_INTERF))
+            EgtSetColor(nPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
+            EgtSetColor(nDwnPocId, If(bFreeEnd, COL_MCH_DISABLED(), COL_MCH_DIS_INTERF()))
          Else
             Dim colCut As Color3d
             If bOnMach Then
@@ -341,6 +343,7 @@ Public Module SplitAuto
       Dim ptOri As Point3d
       EgtGetTableRef(1, ptOri)
       Dim vtOri As New Vector3d(ptOri.x, ptOri.y, ptOri.z)
+      ' ---------------------------------- GREZZI ----------------------------------
       ' Eseguo eventuali spezzature dei grezzi e vi sposto i pezzi (i grezzi devono essere sempre copiati per Registrazione con rotazione)
       Dim nRawId As Integer = EgtGetFirstRawPart()
       While nRawId <> GDB_ID.NULL
@@ -392,10 +395,19 @@ Public Module SplitAuto
          ' passo al successivo grezzo
          nRawId = EgtGetNextRawPart(nRawId)
       End While
+      ' ---------------------------------- GREZZI ----------------------------------
       ' Cancello preview dei tagli allungati dalla lavorazione
       For Each nCut As Integer In vCuts
          RemoveMachiningPreview(nCut)
       Next
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      ChangeOperationPhase(nNewPhase)
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      Return True
+   End Function
+
+   ' Sposta le lavorzioni della fase precedente a quella indicata
+   Friend Sub ChangeOperationPhase_ERR(nNewPhase As Integer)
       ' Sposto tutte le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
       Dim nId = EgtGetFirstOperation()
       While nId <> GDB_ID.NULL
@@ -416,9 +428,50 @@ Public Module SplitAuto
          End If
          nId = nNextId
       End While
-      Return True
-   End Function
+   End Sub
 
+   ' Miglioramento della gestione delle lavorazioni
+   Friend Sub ChangeOperationPhase(nNewPhase As Integer)
+      ' creo l'elenco delle lavorazioni che devono essere sposate
+      Dim MchList As New List(Of Integer)
+      ' Recupero le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
+      Dim nId = EgtGetFirstOperation()
+      While nId <> GDB_ID.NULL
+         Dim nNextId = EgtGetNextOperation(nId)
+         If IsValidMachining(nId) And EgtGetOperationPhase(nId) = nNewPhase - 1 And EgtExistsInfo(nId, INFO_MCH_USER_OFF) Then
+            ' Provo ad inserire la lavorazione nell'elenco
+            AddMach(MchList, nId)
+            ' sposto le inglobate
+            Dim sInfo As String = String.Empty
+            If EgtGetInfo(nId, INFO_MCH_OTHMID, sInfo) Then
+               Dim sItems() As String = sInfo.Split(",".ToCharArray)
+               For Each sId2 As String In sItems
+                  Dim nId2 As Integer = 0
+                  StringToInt(sId2, nId2)
+                  If nId2 > 0 Then
+                     ' Provo ad inserire la lavorazione nell'elenco
+                     AddMach(MchList, nId2)
+                  End If
+               Next
+            End If
+         End If
+         nId = nNextId
+      End While
+      ' Procedo ora a spostare le lavorazioni nella nuova disposizione
+      For Each ItemMchId As Integer In MchList
+         EgtChangeOperationPhase(ItemMchId, nNewPhase)
+      Next
+   End Sub
+
+   ' Inserisce gli inidici delle lavorazioni evitando di inserire dei doppioni
+   Private Sub AddMach(MchList As List(Of Integer), IdMch As Integer)
+      For Each Item As Integer In MchList
+         If IdMch = Item Then
+            Return
+         End If
+      Next
+      MchList.Add(IdMch)
+   End Sub
    '-----------------------------------------------------------------------------------------------
    Friend Function CalculateSplitAuto() As Boolean
       ' Fase iniziale

CadCuts/SplitPageUC.xaml

@@ -38,7 +38,7 @@
                <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
             </Button>
             <Button Name="NextBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
+               <Image Source="{DynamicResource NumericKeyboardArrowImg}" Style="{StaticResource OmagCut_ButtonIcon}" RenderTransformOrigin="0.5,0.5">
                   <Image.RenderTransform>
                      <TransformGroup>
                         <RotateTransform Angle="180"/>
@@ -63,17 +63,27 @@
             <RowDefinition Height="1*"/>
          </Grid.RowDefinitions>
 
-         <ListBox Name="MachiningLsBx" Grid.Row="1" ItemTemplate="{DynamicResource NameIdLsBxItem}"
+         <ListBox Name="MachiningLsBx" Grid.Row="1"
             SelectionMode="Extended">
-            <ListBox.ItemContainerStyle>
-               <Style TargetType="ListBoxItem">
-                  <Style.Triggers>
-                     <DataTrigger Binding="{Binding bIsActive}" Value="False">
-                        <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
-                     </DataTrigger>
-                  </Style.Triggers>
-               </Style>
-            </ListBox.ItemContainerStyle>
+            <ListBox.ItemTemplate>
+               <DataTemplate>
+                  <TextBlock Text="{Binding Name}">
+                     <TextBlock.Style>
+                        <Style TargetType="TextBlock" BasedOn="{StaticResource OmagCut_CurrProjSummeryTextBlock}">
+                           <Style.Triggers>
+                              <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                                 <Setter Property="TextDecorations" Value="Strikethrough"/>
+                                 <Setter Property="Foreground" Value="{StaticResource OmagCut_White}"/>
+                              </DataTrigger>
+                              <DataTrigger Binding="{Binding bIsActive}" Value="True">
+                                 <Setter Property="Foreground" Value="Black"/>
+                              </DataTrigger>
+                           </Style.Triggers>
+                        </Style>
+                     </TextBlock.Style>
+                  </TextBlock>
+               </DataTemplate>
+            </ListBox.ItemTemplate>
          </ListBox>
 
          <Grid Grid.Row="2">
@@ -101,13 +111,13 @@
             </Grid.ColumnDefinitions>
 
             <Button Name="OnOffBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource ON_OFF-singolo-taglioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+               <Image Source="{DynamicResource ON_OFF-singolo-taglioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
             <Button Name="AllOnBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Tutti-ONImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+               <Image Source="{DynamicResource Tutti-ONImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
             <Button Name="AllOffBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Tutti-OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+               <Image Source="{DynamicResource Tutti-OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
             </Button>
 
          </Grid>
@@ -119,17 +129,36 @@
                <ColumnDefinition Width="1*"/>
             </Grid.ColumnDefinitions>
 
-                <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-                </Button>
-                <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource Inizio-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-                </Button>
-                <Button Name="CutEndBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource Fine-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-                </Button>
+            <Button Name="CutBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            
+            <Button Name="CutStartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Inizio-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
 
-            </Grid>
+            <Button Name="CutEndBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource Fine-Allunga-AccorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+
+            <!-- solo per macchine con lavorazioni Waterjet -->
+            <ToggleButton Name="BridgesWJBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource PonticelliWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
+
+             <!--solo per macchine con lavorazioni Waterjet--> 
+            <Button Name="QualityWJBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource QualityWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+            
+            <!-- solo per macchine con lavorazioni Waterjet -->
+            <ToggleButton Name="BridgesDeleteWJBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+               <Image Source="{DynamicResource PonticelliDeleteWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </ToggleButton>
+
+           
+
+         </Grid>
 
       </Grid>
 
@@ -152,41 +181,41 @@
 
 
          <Button Name="OutCenStartBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Inizio-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            <Image Source="{DynamicResource Inizio-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="OutCenEndBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Fine-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="ModifStartBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Modifica-InizioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="ModifEndBtn" Grid.Column="3"  Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Modifica-FineImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="InvertBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource InvertiImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="PauseBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllOutStartBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Inizio-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllCenStartBtn" Grid.Column="7" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Inizio-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllOutEndBtn" Grid.Column="8" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Fine-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllCenEndBtn" Grid.Column="9" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Fine-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllExtendBtn" Grid.Column="10" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Tutti-allungaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+         </Button>
+         <Button Name="AllReduceBtn" Grid.Column="11" Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Image Source="{DynamicResource Tutti-accorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
          </Button>
-            <Button Name="OutCenEndBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Fine-Centro-FuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="ModifStartBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Modifica-InizioImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="ModifEndBtn" Grid.Column="3"  Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Modifica-FineImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="InvertBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource InvertiImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="PauseBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Pausa-ON_OFFImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="AllOutStartBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Inizio-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="AllCenStartBtn" Grid.Column="7" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Inizio-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="AllOutEndBtn" Grid.Column="8" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Fine-tutti-fuoriImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="AllCenEndBtn" Grid.Column="9" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Fine-tutti-centroImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="AllExtendBtn" Grid.Column="10" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Tutti-allungaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
-            <Button Name="AllReduceBtn" Grid.Column="11" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Tutti-accorciaImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
 
       </Grid>
 

CadCuts/VacuumCups.vb

@@ -67,17 +67,17 @@ Module VacuumCups
    End Function
 
    ' carico i dati macchina relativi al peso massimo movimentabile
-   Friend Sub GetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
+   Friend Sub SetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
       m_RawDensity = Density
       m_MaxWeightSinglePlugger = MaxSingle
       m_MaxWeightDoublePlugger = MaxDouble
    End Sub
 
-   Friend Sub GetRotationForExtraStrokeY(Rotate As Boolean)
+   Friend Sub SetRotationForExtraStrokeY(Rotate As Boolean)
       bRotateVacuumNearExtraStrokeY = Rotate
    End Sub
 
-   Friend Sub GetRotationForExtraStrokeX(Rotate As Boolean)
+   Friend Sub SetRotationForExtraStrokeX(Rotate As Boolean)
       bRotateVacuumNearExtraStrokeX = Rotate
    End Sub
    Friend Function GetVacuumId() As Integer
@@ -451,14 +451,14 @@ Module VacuumCups
          Dim dPreferredRot As Double = m_dPreferredRot
          ' -------------------- INIZIO GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
          ' verifico l'orientamento del pezzo
-         If bRotateVacuumNearExtraStrokeX And (Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45) Then
+         If bRotateVacuumNearExtraStrokeX And Not IsHorizontal(dAngOrizzDeg) Then
             ' se l'orientamento è verticale
             If frMinRect.Orig().x < b3Tab.Center().x Then
                dPreferredRot = m_dPrefVertRotXMinus
             Else
                dPreferredRot = m_dPrefVertRotXPlus
             End If
-         ElseIf bRotateVacuumNearExtraStrokeY And (Math.Abs(dRotAngDeg - 90) > 45 Or Math.Abs(dRotAngDeg - 270) > 45) Then
+         ElseIf bRotateVacuumNearExtraStrokeY And IsHorizontal(dAngOrizzDeg) Then
             ' se l'orientemanto è orizzontale e la macchina è stata abilitata
             If frMinRect.Orig().y < b3Tab.Center().y Then
                dPreferredRot = m_dPrefVertRotYPlus
@@ -467,8 +467,8 @@ Module VacuumCups
             End If
          End If
          ' -------------------- FINE GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
-         Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
-         While dRotAngDeg - dPreferredRot >= dAngDelta / 2 
+         Dim dAngDelta As Double = If(Math.Abs(b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
+         While dRotAngDeg - dPreferredRot >= dAngDelta / 2
             dRotAngDeg -= dAngDelta
          End While
          While dRotAngDeg - dPreferredRot <= -dAngDelta / 2
@@ -539,16 +539,34 @@ Module VacuumCups
       Return dDist
    End Function
 
-   ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   Private Function IsHorizontal(dDegAng As Double) As Boolean
+      If (Math.Abs(dDegAng) > 45 And Math.Abs(dDegAng) < 135) Or (Math.Abs(dDegAng) > 225 And Math.Abs(dDegAng) < 315) Then
+         Return False
+      End If
+      Return True
+   End Function
+
+   ' assegnate le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
    Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
-      Dim dX, dY, dZ As Double
-      Dim nStat As Integer
+      ' Posizione Home dell'asse rotante
       Dim dCHome As Double
       EgtGetAxisHomePos("C", dCHome)
-      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      ' Corse dell'asse
+      Dim dCMin As Double
+      EgtGetAxisMin("C", dCMin)
+      Dim dCMax As Double
+      EgtGetAxisMax("C", dCMax)
+      ' Porto l'angolo nel range
+      Dim dRotAngMachDeg As Double = dRotAngDeg + dCHome
+      AdjustAngleInRange(dRotAngMachDeg, dCMin, dCMax)
+      ' Imposto la ventosa come fosse un utensile
       EgtSetCalcTool("", "H4", 1)
-      EgtGetCalcPositions(ptRef, dRotAngDeg + dCHome, 0, nStat, dX, dY, dZ)
-      EgtVerifyOutstroke(dX, dY, dZ, dRotAngDeg + dCHome, 0, nStat)
+      ' Calcolo gli assi macchina
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      EgtGetCalcPositions(ptRef, dRotAngMachDeg, 0, nStat, dX, dY, dZ)
+      ' Verifico le corse
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngMachDeg, 0, nStat)
       Return nStat
    End Function
 

Constants/ConstGen.vb

@@ -189,6 +189,8 @@ Module ConstGen
    Public Const INFO_TOPRODAREA As String = "ToProdArea"
    ' Info per nome progetti
    Public Const INFO_PROJNAME As String = "ProjName"
+   ' Info per parcheggio asse C
+   Public Const INFO_CAXESHOME As String = "CAxesHome"
 
    ' Nome layer delle regioni
    Public Const NAME_REGION As String = "Region"
@@ -343,6 +345,11 @@ Module ConstGen
    ' Info in pezzo per facet di ultima superficie selezionata
    Public Const INFO_FRAME_FACET As String = "Facet"
 
+   ' Nome del groppo dei ponticelli per lavorazioni Water
+   Public Const BRIDGES As String = "Bridges"
+   ' Nome dell'entità ponticello contenuta nel gruppo BRIDGES
+   Public Const BRIDGELINE As String = "BridgeLine"
+
    ' utensile per le lavorazioni manuali
    Public Const DUMMY_SAW As String = "DummySAW"
    ' lavorazione manuale
@@ -386,6 +393,9 @@ Module ConstGen
    Public Function COL_MCH_DRIPCUT() As Color3d
       Return New Color3d(255, 0, 165)
    End Function
+   Public Function COL_MCH_ONENGRAVE_ANG() As Color3d
+      Return New Color3d(255, 255, 100)
+   End Function
    Public Function COL_MCH_DRIPFREE() As Color3d
       Return New Color3d(192, 0, 128)
    End Function

Constants/ConstIni.vb

@@ -18,6 +18,7 @@ Module ConstIni
    Public Const S_GENERAL As String = "General"
    Public Const K_DEBUG As String = "Debug"
    Public Const K_LICENCE As String = "Licence"
+   Public Const K_NETKEY As String = "NetKey"
    Public Const K_MESSAGESDIR As String = "MessagesDir"
    Public Const K_MESSAGES As String = "Messages"
    Public Const K_SUPPORT As String = "Support"
@@ -49,6 +50,8 @@ Module ConstIni
    Public Const K_SMARTMACHININGPAGE As String = "SmartMachiningPage"
    Public Const K_STARTPROGRAM As String = "StartProgram"
    Public Const K_GENERATECN As String = "GenerateCN"
+   Public Const K_FRACTIONPATTERN As String = "FractionPattern"
+   Public Const K_PRECISION As String = "Precision"
 
 
    Public Const S_LANGUAGES As String = "Languages"
@@ -113,6 +116,8 @@ Module ConstIni
    Public Const K_LASTCOLOR As String = "LastColor"
    Public Const K_COLOR As String = "Color"
 
+   Public Const S_FRAMECOMPO As String = "FrameCompo"
+
    Public Const S_EXTCOMPO As String = "Compo"
 
    Public Const S_INTCOMPO As String = "InternalCompo"
@@ -135,6 +140,7 @@ Module ConstIni
    Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
    Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
    Public Const K_ENGRAVESHORT As String = "EngraveShort"
+   Public Const K_ENGRAVEANGLE As String = "EngraveAngle"
    Public Const K_DRIPOFFSET As String = "DripOffset"
    Public Const K_DRIPOFFSET2 As String = "DripOffset2"
    Public Const K_DRIPDEPTH As String = "DripDepth"
@@ -155,6 +161,7 @@ Module ConstIni
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
    Public Const K_DRAG_RETTANGLE As String = "DragRectangle"
+   Public Const K_STARTENDMODIFYONINTCORNER As String = "StartEndModifyOnIntCorner"
 
    Public Const S_SPLIT As String = "Split"
    Public Const K_MOVE_LEV As String = "MoveLevel"
@@ -170,6 +177,14 @@ Module ConstIni
    Public Const K_CSVCURRDIR As String = "CurrDir"
    Public Const K_CSVLASTFILE As String = "LastFile"
 
+   Public Const S_TRF As String = "TRF"
+   Public Const K_ORDCODE As String = "OrdCode"
+   Public Const K_ORDDESC As String = "OrdDesc"
+   Public Const K_PARTCODE As String = "PartCode"
+   Public Const K_MATCODE As String = "MatCode"
+   Public Const K_SURFCODE As String = "SurfCode"
+   Public Const K_TRFTHICKNESS As String = "TrfThickness"
+
    Public Const S_SLABDXF As String = "SlabDxf"
    Public Const K_IMPORTSLABDXF As String = "ImportSlabDxf"
    Public Const K_SLABLAYER As String = "SlabLayer"
@@ -210,6 +225,12 @@ Module ConstIni
    Public Const K_RAWOFFSX As String = "OffsX"
    Public Const K_RAWOFFSY As String = "OffsY"
    Public Const K_RAWKERF As String = "Kerf"
+   Public Const K_ENABLEOTHERREFTAB As String = "EnableOtherRefTab"
+   Public Const K_OTHERREFTAB As String = "OtherRefTab"
+   Public Const K_OTHERREFTABX As String = "OtherRefTabX"
+   Public Const K_OTHERREFTABY As String = "OtherRefTabY"
+   Public Const K_OTHERREFTABPOS As String = "OtherRefTabPos"
+
 
    Public Const S_RAWMOVE As String = "RawMove"
    Public Const K_RAWSTEP As String = "Step"
@@ -317,6 +338,9 @@ Module ConstIni
    Public Const K_DC_TEST_LENGTH As String = "TestLength"
    Public Const K_DC_TEST_ANGH As String = "TestAngH"
    Public Const K_DC_TEST_OFFSET As String = "TestOffset"
+   Public Const K_DC_OFFSET_SQUARING As String = "OffsetSquaring"
+   Public Const K_DC_EXTRA_LEN_SQUARING As String = "ExtraLenSquaring"
+   Public Const K_ENABLEINVERT As String = "EnableInvert"
 
    Public Const S_STATDATA As String = "StatData"
    Public Const K_SD_DAY As String = "Day"

Constants/ConstMachIni.vb

@@ -46,6 +46,16 @@
    Public Const K_THREADSLEEP As String = "ThreadSleep"
    Public Const K_PHOTODELEY As String = "PhotoDeley"
 
+   Public Const S_NCFANUC As String = "NcFanuc"
+   Public Const K_SETNCMODE As String = "SetNcMode"
+   Public Const K_BASEADDRINT As String = "BaseAddrInt"
+   Public Const K_BASEADDRBIT As String = "BaseAddrBit"
+   Public Const K_NUMVARINT As String = "NumVarInt"
+   Public Const K_NUMVARBIT As String = "NumVarBit"
+
+   Public Const S_EXECLUA As String = "ExecLua"
+   Public Const K_FILESCRIPT_LUA As String = "FileScript"
+
    Public Const S_NCDATA As String = "NcData"
    Public Const K_NEWVARIABLE As String = "NewVariable"
    Public Const K_NEWCONSOLE As String = "NewConsole"
@@ -75,6 +85,7 @@
    Public Const K_TABLEDOWN As String = "TableDown"
    Public Const K_MANUAL As String = "Manual"
    Public Const K_DOORCLOSED As String = "DoorClosed"
+   Public Const K_DOOROPENDED As String = "DoorOpened"
    Public Const K_LIMITZ As String = "LimitZ"
    Public Const K_POWEROVR As String = "PowerOvr"
    Public Const K_PARKING As String = "Parking"
@@ -109,6 +120,7 @@
    Public Const K_FEEDHOLD As String = "FeedHold"
    Public Const K_SPOTLIGHT1 As String = "SpotLight1"
    Public Const K_SPOTLIGHT2 As String = "SpotLight2"
+   Public Const K_NAXES As String = "nAxes"
    ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
    Public Const K_XYJOG As String = "XYJog"
@@ -216,6 +228,11 @@
    Public Const K_MACH_CUTFSEVLEN As String = "CutFsevLen"
    Public Const K_MACH_CUTFSEVPERC As String = "CutFsevPerc"
    Public Const K_USELASERORIGIN As String = "UseLaserOrigin"
+   Public Const K_HOLES_DIAMITERWJ As String = "HolesDiameterWJ"
+   Public Const K_HOLES_OFFSETWJ As String = "HolesOffsetWJ"
+   Public Const K_MIN_RADIUSWJ As String = "MinRadiusWJ"
+   Public Const K_MACH_DRILLINGWJ_ON_CORNERS As String = "DrillingWJOnCorners"
+   Public Const K_MACH_RECTIFICATION_ON_SUBSQUARE As String = "RectificationSubSqWJ"
    ' DrillMillC90
    ' CutLongDxSx
    ' AngRotMultiCut
@@ -263,6 +280,7 @@
    Public Const S_MACH_PROBING As String = "Probing"
    Public Const K_PROBINGSTATEVAR As String = "ProbingStateVar"
    Public Const K_SAWDIAMETER As String = "SawDiameter"
+   Public Const K_TOOLLENGTH As String = "ToolLength"
    Public Const K_RAWTHICKNESS As String = "RawThickness"
    Public Const K_ENABLERAWPROBE As String = "EnableRawProbe"
 

DirectCuts/ControlsDirectCutUC.xaml

@@ -0,0 +1,177 @@
+<UserControl x:Class="ControlsDirectCutUC"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             DataContext="Self"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:OmagCUT="clr-namespace:OmagCUT"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
+
+   <Grid Name="LeftButtonGrid" Grid.Row="1" >
+      <Grid.RowDefinitions>
+         <!--<RowDefinition Height="1*"/>
+            <RowDefinition Height="7*"/>-->
+         <RowDefinition Height="9*"/>
+      </Grid.RowDefinitions>
+      <!-- Definizione della Grid laterale -->
+      <Grid Name="CutTypeGrid" Grid.Row="1" >
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <!--<RowDefinition Height="1*"/>-->
+         </Grid.RowDefinitions>
+         <Button Name="ManualBtn" Grid.Column="2" Grid.Row="0"                    
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Movimento-manualeImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="ManualTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="SingleCutBtn" Grid.Row="1"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-singoloImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SingleCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="MultipleCutBtn" Grid.Row="2"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-multiploImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="MultipleCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="GridCutBtn" Grid.Row="3"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Taglio-grigliaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="GridCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+
+         <Button Name="SingleDrillBtn" Grid.Row="4"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Foro-singoloImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SingleDrillTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="FlatteningCutBtn" Grid.Row="5"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource SpianaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="FlatteningCutTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <!--<Button Name="PolishingBtn" Grid.Row="6"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="PolishingTxt" Grid.Column="1"
+                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>-->
+
+         <!--<Button Name="CopyTemplateBtn" Grid.Row="7"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>-->
+
+         <Button Name="SquaringBtn" Grid.Row="6"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SquaringTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <!--<Button Name="SawTestBtn" Grid.Row="6"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="80"/>
+                        <ColumnDefinition Width="140"/>
+                    </Grid.ColumnDefinitions>
+                    <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                    <TextBlock Name="SawTestTxt" Grid.Column="1"
+                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                </Grid>
+            </Button>-->
+
+         <Grid Name="ChangeUCGrid" Grid.Row="7">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="ChangeUCBtn" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Grid>
+                  <!--<Image Name="ImageCompo9" Source="{DynamicResource NumericKeyboardArrowImg}" />-->
+                  <TextBlock Name="ChangeUCTxBl" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+               </Grid>
+            </Button>
+         </Grid>
+
+      </Grid>
+   </Grid>
+</UserControl>

DirectCuts/ControlsDirectCutUC.xaml.vb

@@ -0,0 +1,265 @@
+Imports EgtUILib
+Public Class ControlsDirectCutUC
+
+   ' Dichiarazione delle Page UserControl
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   ' ---- MAI USATA ---- nuova finestra per i comandi per il taglio manuale nuovo
+   Friend m_SingleCutAuto As SingleCutAuto
+   ' ---- MAI USATA ----
+   Friend m_MachineButtons As MachineButtonsUC
+   Friend m_ManualAxesMove As ManualAxesMoveUC
+   Friend m_SingleCut As SingleCutUC
+   Friend m_SingleDrill As SingleDrillUC
+   Friend m_MultipleCut As MultipleCut
+   Friend m_GridCut As GridCut
+   Friend m_FlatteningCut As FlatteningCut
+   Friend m_Squaring As SquaringUC
+   Friend m_ControlsMachineButton As ControlsMachineButtonUC
+   Friend m_VacuumMachineButton As VacuumMachineButtonUC
+
+   Friend m_ControlDirectCutPage1 As ControlsDirectCutUC1
+
+   ' Stato di visualizzazione della macchina
+   Friend m_bShowMachine As Boolean = False
+   Friend m_nMachLook As Integer = MCH_LOOK.ALL
+   ' Dati generali CN
+   Friend m_CN As CN_generico
+   Private m_bFirst As Boolean = True
+   ' Riferimento alla pagina correntemente attiva
+   Friend m_ActiveDirectCutPage As DirectCutPages = DirectCutPages.DirectCut
+   ' Variabili che indicano attivazione paginette con bottoni macchina
+   Private m_ControlsBtn_IsActive As Boolean
+
+   Public Shared m_dZSafe As Double = 52
+
+   ' Variabile che indica se sono attivi i bottoni macchina nuovi o vecchi
+   Friend m_NewMachineButtonsType As Boolean
+   ' Indica che la finestra del talio Singolo deve essere di tipo manuale
+   Friend m_bManulaCut As Boolean = False
+
+   ' elenco dei nuovi bottoni
+   Private m_ButtonJogList As New List(Of MachineButton)
+
+   Enum DirectCutPages
+      ' pagina principale di tagli diretti
+      DirectCut
+      ' nuova pagina di tagli diretti
+      DirectCut1
+      ' elenco dei comandi associati
+      ManualAxesMove
+      SingleCut
+      MultipleCut
+      GridCut
+      FlatteningCut
+      Polishing
+      CopyTemplate
+      SawTest
+      SingleCutAuto
+      SingleDrill
+      Squaring
+   End Enum
+
+   Private Sub ControlsDirectCutUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' leggo la configurazione del programma per i nuovi tagli manuali
+      m_bManulaCut = GetPrivateProfileInt(S_GENERAL, K_MANUAL_CUT, 0, m_MainWindow.GetIniFile()) <> 0
+
+      'Creazione delle Page UserControl
+      m_MachineButtons = New MachineButtonsUC
+      m_ManualAxesMove = New ManualAxesMoveUC
+      m_SingleCut = New SingleCutUC
+      m_SingleDrill = New SingleDrillUC
+      m_MultipleCut = New MultipleCut
+      m_GridCut = New GridCut
+      m_FlatteningCut = New FlatteningCut
+      m_Squaring = New SquaringUC
+      m_ControlsMachineButton = New ControlsMachineButtonUC
+      m_VacuumMachineButton = New VacuumMachineButtonUC
+      ' reiferimento alla pagina succesiva
+      m_ControlDirectCutPage1 = New ControlsDirectCutUC1
+      ' Costruisco la finestra per il nuovo tipo di taglio manuale
+      m_SingleCutAuto = New SingleCutAuto
+
+      'Posizionemento nella griglia delle Page UserControl DirectCutPageUC
+      m_MachineButtons.SetValue(Grid.RowProperty, 2)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 7)
+      m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
+      If m_bManulaCut Then
+         m_SingleCutAuto.SetValue(Grid.RowProperty, 1)
+      Else
+         m_SingleCut.SetValue(Grid.RowProperty, 1)
+      End If
+      m_SingleDrill.SetValue(Grid.RowProperty, 1)
+      m_MultipleCut.SetValue(Grid.RowProperty, 1)
+      m_GridCut.SetValue(Grid.RowProperty, 1)
+      m_FlatteningCut.SetValue(Grid.RowProperty, 1)
+      m_Squaring.SetValue(Grid.RowProperty, 1)
+      m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
+      m_VacuumMachineButton.SetValue(Grid.RowProperty, 1)
+
+      ' ManualBtn.Content = EgtMsg(90201)
+      ManualTxt.Text = EgtMsg(90201)
+      'SingleCutBtn.Content = EgtMsg(90202)
+      SingleCutTxt.Text = EgtMsg(90202)
+      'SingleDrillBtn.Content = "Foro singolo"
+      SingleDrillTxt.Text = EgtMsg(90258)
+      'MultipleCutBtn.Content = EgtMsg(90203)
+      MultipleCutTxt.Text = EgtMsg(90203)
+      'GridCutBtn.Content = EgtMsg(90204)
+      GridCutTxt.Text = EgtMsg(90204)
+      'FlatteningCutBtn.Content = EgtMsg(90206)
+      FlatteningCutTxt.Text = EgtMsg(90206)
+      ' 90261=Squaring
+      SquaringTxt.Text = EgtMsg(90261)
+      ' 90409=Others
+      ChangeUCTxBl.Text = EgtMsg(90409)
+
+   End Sub
+
+   Private Sub ControlsDirectCutUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      ' Se rientro da simulazione
+      If m_ActiveDirectCutPage = DirectCutPages.SingleCut Then
+         LeftButtonGrid.Children.Add(m_SingleCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto Then
+         LeftButtonGrid.Children.Add(m_SingleCutAuto)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.MultipleCut Then
+         LeftButtonGrid.Children.Add(m_MultipleCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.GridCut Then
+         LeftButtonGrid.Children.Add(m_GridCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.FlatteningCut Then
+         LeftButtonGrid.Children.Add(m_FlatteningCut)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleDrill Then
+         LeftButtonGrid.Children.Add(m_SingleDrill)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.Squaring Then
+         LeftButtonGrid.Children.Add(m_Squaring)
+         Return
+      End If
+
+      If m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.MachineButtonUC Or
+         m_MainWindow.m_DirectCutPageUC.m_ActiveControl <> DirectCutPageUC.Controls.VacuumButtonUC Then
+         ' Caso standard
+         m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      End If
+
+      ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
+      Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
+      Dim bH1Exists As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+
+      ManualBtn.IsEnabled = bH1Exists
+      ' sviluppo rimasto in sospeso
+      If m_bManulaCut Then
+         ' anche se non è presente un grezzo mantengo abilitato il bottone
+         SingleCutBtn.IsEnabled = True
+      Else
+         SingleCutBtn.IsEnabled = bRawOk
+      End If
+      MultipleCutBtn.IsEnabled = bRawOk
+      GridCutBtn.IsEnabled = bRawOk
+      SingleDrillBtn.IsEnabled = (bRawOk And bH1Exists)
+      FlatteningCutBtn.IsEnabled = (bRawOk And bH1Exists)
+      SquaringBtn.IsEnabled = bRawOk
+
+      ' aggiorno la visualizzazione dei parametri
+      ReloadParam()
+
+      ' Nascondo i pezzi in parcheggio
+      HideParkedParts()
+      EgtZoom(ZM.ALL)
+
+   End Sub
+
+   ' ricarico i parametri utensili per definizione 
+   Public Sub ReloadParam()
+      Dim sCurrSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sCurrSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim bSaw As Boolean = False
+
+      ' se esiste una lavorazione di lama corrente vuol dire che deve essere preferita
+      If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
+         bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
+      End If
+      m_SingleCut.SetEnableParam(bSaw)
+      m_MultipleCut.SetEnableParam(bSaw)
+      m_GridCut.SetEnableParam(bSaw)
+   End Sub
+
+#Region "COMMAND CLICK BTN"
+
+   Private Sub ManualBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualBtn.Click
+      LeftButtonGrid.Children.Add(m_ManualAxesMove)
+      m_ActiveDirectCutPage = DirectCutPages.ManualAxesMove
+   End Sub
+
+   Private Sub SingleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleCutBtn.Click
+      If m_bManulaCut Then
+         LeftButtonGrid.Children.Add(m_SingleCutAuto)
+         m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto
+      Else
+         LeftButtonGrid.Children.Add(m_SingleCut)
+         m_ActiveDirectCutPage = DirectCutPages.SingleCut
+      End If
+
+   End Sub
+
+   Private Sub MultipleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles MultipleCutBtn.Click
+      LeftButtonGrid.Children.Add(m_MultipleCut)
+      m_ActiveDirectCutPage = DirectCutPages.MultipleCut
+   End Sub
+
+   Private Sub GridCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles GridCutBtn.Click
+      LeftButtonGrid.Children.Add(m_GridCut)
+      m_ActiveDirectCutPage = DirectCutPages.GridCut
+   End Sub
+
+   Private Sub FlatteningCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles FlatteningCutBtn.Click
+      LeftButtonGrid.Children.Add(m_FlatteningCut)
+      m_ActiveDirectCutPage = DirectCutPages.FlatteningCut
+   End Sub
+
+   Private Sub SquaringBtn_Click(sender As Object, e As RoutedEventArgs) Handles SquaringBtn.Click
+      LeftButtonGrid.Children.Add(m_Squaring)
+      m_ActiveDirectCutPage = DirectCutPages.Squaring
+   End Sub
+
+   Private Sub SingleDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleDrillBtn.Click
+      LeftButtonGrid.Children.Add(m_SingleDrill)
+      m_ActiveDirectCutPage = DirectCutPages.SingleDrill
+   End Sub
+
+   ' cambio pagina
+   Private Sub ChangeUCBtn_Click(sender As Object, e As RoutedEventArgs) Handles ChangeUCBtn.Click
+      DirectCutPage_Unloaded(Nothing, Nothing)
+      m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      m_MainWindow.m_DirectCutPageUC.LoadDirectCutUC1()
+   End Sub
+
+#End Region    ' Command Click Btn
+
+
+   Friend Sub DirectCutPage_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      Select Case m_ActiveDirectCutPage
+         Case DirectCutPages.DirectCut Or DirectCutPages.ManualAxesMove
+            ' Non è necessario fare alcunché
+         Case DirectCutPages.SingleCut
+            LeftButtonGrid.Children.Remove(m_SingleCut)
+         Case DirectCutPages.SingleCutAuto
+            LeftButtonGrid.Children.Remove(m_SingleCutAuto)
+         Case DirectCutPages.MultipleCut
+            LeftButtonGrid.Children.Remove(m_MultipleCut)
+         Case DirectCutPages.GridCut
+            LeftButtonGrid.Children.Remove(m_GridCut)
+         Case DirectCutPages.FlatteningCut
+            LeftButtonGrid.Children.Remove(m_FlatteningCut)
+         Case DirectCutPages.SingleDrill
+            LeftButtonGrid.Children.Remove(m_SingleDrill)
+         Case DirectCutPages.Squaring
+            LeftButtonGrid.Children.Remove(m_Squaring)
+      End Select
+   End Sub
+
+End Class

DirectCuts/ControlsDirectCutUC1.xaml

@@ -0,0 +1,86 @@
+<UserControl x:Class="ControlsDirectCutUC1"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             DataContext="Self"
+             xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+             xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+             xmlns:OmagCUT="clr-namespace:OmagCUT"
+             xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib" 
+             mc:Ignorable="d" 
+             d:DesignHeight="597.3" d:DesignWidth="256">
+
+   <Grid Name="LeftButtonGrid" Grid.Row="1" >
+      <Grid.RowDefinitions>
+         <!--<RowDefinition Height="1*"/>
+            <RowDefinition Height="7*"/>-->
+         <RowDefinition Height="9*"/>
+      </Grid.RowDefinitions>
+      <!-- Definizione della Grid laterale -->
+      <Grid Name="CutTypeGrid" Grid.Row="1" >
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="1*"/>
+            <!--<RowDefinition Height="1*"/>-->
+         </Grid.RowDefinitions>
+
+         <Button Name="SawTestBtn" Grid.Row="0"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="SawTestTxt" Grid.Column="1"
+                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="PolishingBtn" Grid.Row="1"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource LucidaturaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="PolishingTxt" Grid.Column="1"
+                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Button Name="CopyTemplateBtn" Grid.Row="2"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="80"/>
+                  <ColumnDefinition Width="140"/>
+               </Grid.ColumnDefinitions>
+               <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+               <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            </Grid>
+         </Button>
+
+         <Grid Name="ChangeUC1Grid" Grid.Row="7">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <Button Name="ChangeUC1Btn" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Grid>
+                  <Image Name="ImageCompo9" Source="{DynamicResource NumericKeyboardArrowImg}" />
+                  <!--<TextBlock Name="LabelCompo9" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>-->
+               </Grid>
+            </Button>
+         </Grid>
+
+      </Grid>
+   </Grid>
+</UserControl>

DirectCuts/ControlsDirectCutUC1.xaml.vb

@@ -0,0 +1,142 @@
+Imports EgtUILib
+Public Class ControlsDirectCutUC1
+
+   ' Dichiarazione delle Page UserControl
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Friend m_Polishing As Polishing
+   Friend m_CopyTemplate As CopyTemplateUC
+   Friend m_SawTest As SawTestUC
+
+   ' Stato di visualizzazione della macchina
+   Friend m_bShowMachine As Boolean = False
+   Friend m_nMachLook As Integer = MCH_LOOK.ALL
+   ' Dati generali CN
+   Friend m_CN As CN_generico
+   Private m_bFirst As Boolean = True
+   ' Riferimento alla pagina correntemente attiva
+   Friend m_ActiveDirectCutPage As DirectCutPages = DirectCutPages.DirectCut
+   ' Variabili che indicano attivazione paginette con bottoni macchina
+   Private m_ControlsBtn_IsActive As Boolean
+
+   Public Shared m_dZSafe As Double = 52
+
+   ' Variabile che indica se sono attivi i bottoni macchina nuovi o vecchi
+   Friend m_NewMachineButtonsType As Boolean
+   ' Indica che la finestra del talio Singolo deve essere di tipo manuale
+   Friend m_bManulaCut As Boolean = False
+
+   Enum DirectCutPages
+      DirectCut
+      DirectCut1
+      Polishing
+      CopyTemplate
+      SawTest
+   End Enum
+
+   Private Sub ControlsDirectCutUC_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' leggo la configurazione del programma per i nuovi tagli manuali
+      m_bManulaCut = GetPrivateProfileInt(S_GENERAL, K_MANUAL_CUT, 0, m_MainWindow.GetIniFile()) <> 0
+
+      'Creazione delle Page UserControl
+      m_SawTest = New SawTestUC
+      m_Polishing = New Polishing
+      m_CopyTemplate = New CopyTemplateUC
+
+      'Posizionemento nella griglia delle Page UserControl
+      m_SawTest.SetValue(Grid.RowProperty, 1)
+      m_Polishing.SetValue(Grid.RowProperty, 1)
+      m_CopyTemplate.SetValue(Grid.RowProperty, 1)
+
+      ' assegno i nomi ai pulsanti
+      SawTestTxt.Text = EgtMsg(90207)
+      PolishingTxt.Text = EgtMsg(90231)
+      'CopyTemplateBtn.Content = EgtMsg(90209)
+      CopyTemplateTxt.Text = EgtMsg(90209)
+      'SquaringTxt.Text = "Squaring"
+
+   End Sub
+
+   Private Sub ControlsDirectCutUC1_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      ' Se rientro da simulazione
+      If m_ActiveDirectCutPage = DirectCutPages.SawTest Then
+         LeftButtonGrid.Children.Add(m_SawTest)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.CopyTemplate Then
+         Me.LeftButtonGrid.Children.Add(m_CopyTemplate)
+         Return
+      ElseIf m_ActiveDirectCutPage = DirectCutPages.Polishing Then
+         Me.LeftButtonGrid.Children.Add(m_Polishing)
+         Return
+      End If
+
+      ' Caso standard
+      m_ActiveDirectCutPage = DirectCutPages.DirectCut1
+
+      ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
+      Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
+      Dim bH1Exists As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+
+      PolishingBtn.IsEnabled = (bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
+      SawTestBtn.IsEnabled = (bRawOk And bH1Exists)
+      CopyTemplateBtn.IsEnabled = bH1Exists
+
+      ' aggiorno la visualizzazione dei parametri
+      ReloadParam()
+
+      ' Nascondo i pezzi in parcheggio
+      HideParkedParts()
+      EgtZoom(ZM.ALL)
+
+   End Sub
+
+   ' ricarica i dati utensili
+   Public Sub ReloadParam()
+      Dim sCurrSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sCurrSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim bSaw As Boolean = False
+
+      ' se esiste una lavorazione di lama corrente vuol dire che deve essere preferita
+      If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
+         bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
+      End If
+      'm_SingleCut.SetEnableParam(bSaw)
+      'm_MultipleCut.SetEnableParam(bSaw)
+      'm_GridCut.SetEnableParam(bSaw)
+   End Sub
+
+#Region "COMMAND CLICK BTN"
+   Private Sub SawTestBtn_Click(sender As Object, e As RoutedEventArgs) Handles SawTestBtn.Click
+      LeftButtonGrid.Children.Add(m_SawTest)
+      m_ActiveDirectCutPage = DirectCutPages.SawTest
+   End Sub
+
+   Private Sub PolishingBtn_Click(sender As Object, e As RoutedEventArgs) Handles PolishingBtn.Click
+      LeftButtonGrid.Children.Add(m_Polishing)
+      m_ActiveDirectCutPage = DirectCutPages.Polishing
+   End Sub
+
+   Private Sub CopyTemplateBtn_Click(sender As Object, e As RoutedEventArgs) Handles CopyTemplateBtn.Click
+      LeftButtonGrid.Children.Add(m_CopyTemplate)
+      m_ActiveDirectCutPage = DirectCutPages.CopyTemplate
+   End Sub
+
+   Private Sub ChangeUC1Btn_Click(sender As Object, e As RoutedEventArgs) Handles ChangeUC1Btn.Click
+      DirectCutPage_Unloaded(Nothing, Nothing)
+      m_ActiveDirectCutPage = DirectCutPages.DirectCut1
+      m_MainWindow.m_DirectCutPageUC.LoadDirectCutUC()
+   End Sub
+
+#End Region    ' Command Click Btn
+
+   Friend Sub DirectCutPage_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      Select Case m_ActiveDirectCutPage
+         Case DirectCutPages.SawTest
+            LeftButtonGrid.Children.Remove(m_SawTest)
+         Case DirectCutPages.Polishing
+            LeftButtonGrid.Children.Remove(m_Polishing)
+         Case DirectCutPages.CopyTemplate
+            LeftButtonGrid.Children.Remove(m_CopyTemplate)
+      End Select
+   End Sub
+
+End Class

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -76,6 +76,11 @@ Public Class ControlsMachineButtonUC
       End If
    End Sub
 
+#Region "STATE CHANGED"
+   ' ------------------------------------------------------------------------------
+   ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
+   '-------------------------------------------------------------------------------
+
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim SpindleButton As TwoStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
@@ -255,38 +260,34 @@ Public Class ControlsMachineButtonUC
       Dim DoorOpenedButton As ThreeStateButton = Nothing
       For Each MachineButton As MachineButton In m_ButtonList
          If MachineButton.StateFlag = K_DOORCLOSED Then
-            'If TypeOf MachineButton Is NoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, NoStateButton)
-            'ElseIf TypeOf MachineButton Is TwoStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, TwoStateButton)
-            'ElseIf TypeOf MachineButton Is ThreeStateButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, ThreeStateButton)
-            'ElseIf TypeOf MachineButton Is DoubleCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, DoubleCommandButton)
-            'ElseIf TypeOf MachineButton Is PressedCommandButton Then
-            '   DoorClosedButton = DirectCast(MachineButton, PressedCommandButton)
-            'End If
             DoorClosedButton = MachineButton
          End If
-         If MachineButton.StateFlag = "DoorOpened" Then
+         If MachineButton.StateFlag = K_DOOROPENDED Then
             DoorOpenedButton = MachineButton
          End If
       Next
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorClosedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_Red")
             Case 1, 2
+               ' porta in movimento/aperta
                DoorClosedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
          End Select
       End If
+      ' Chiusura porte (gesrtione comando Three/Two state
       If Not IsNothing(DoorOpenedButton) Then
          Select Case DoorClosedState
             Case 0
+               ' porta aperta
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_LightGray")
             Case 1
+               ' porta in movimento 
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Yellow")
             Case 2
+               ' porta chiusa
                DoorOpenedButton.Background = Application.Current.FindResource("OmagCut_Green")
          End Select
       End If
@@ -372,6 +373,7 @@ Public Class ControlsMachineButtonUC
       'End If
    End Sub
 
+#End Region    ' State Range
 
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
@@ -569,13 +571,64 @@ Public MustInherit Class MachineButton
                   EgtOutLog("dopo scrittura seconda variabile")
                End If
                Return
+            Case 4
+               ' ------------------------------------ FANUC ------------------------------------
+               ' eventuale scrittura di linea di comando MDI
+               If Not String.IsNullOrEmpty(CmdString) Then
+                  ' attivo mpdalità MDI
+                  m_CN.DGeneralFunctions_WriteCncMode(2)
+                  System.Threading.Thread.Sleep(100)
+                  ' salvo la stringa di comando ricevuta dal file lua
+                  m_CN.sz_ManualDataInput = CmdString
+                  ' esguo la funzione che ha il compito di scrivere il comando MDI
+                  m_CN.MDI_command()
+               End If
+               ' attivo modalità AUTO
+               m_CN.DGeneralFunctions_WriteCncMode(7)
+               System.Threading.Thread.Sleep(100)
+               If String.IsNullOrEmpty(EValue) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue As Boolean
+                     If EValue.Trim = "1" Then bEValue = True
+                     m_CN.NC_write_var_bit(ENumber, CBool(EValue))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber, CShort(EValue))
+                  End If
+                  EgtOutLog("Fanuc_DNumber= " & ENumber & " DValue= " & EValue)
+               End If
+               ' eventale caricamento seconda variabile
+               If String.IsNullOrEmpty(EValue2) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber2)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber2)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber2.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue2 As Boolean
+                     If EValue2.Trim = "1" Then bEValue2 = True
+                     m_CN.NC_write_var_bit(ENumber2, CBool(EValue2))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber2, CShort(EValue2))
+                  End If
+                  EgtOutLog("Fanuc_DNumber2= " & ENumber2 & " DValue2= " & EValue2)
+               End If
+               Return
          End Select
       End If
       '--------------------------------------------------------- MDI ---------------------------------------------------------
       Dim nResult As Short
       ' assegno la modalità di funzionamento
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
-         Case 1, 2
+         Case 1, 2, 4
             nResult = m_CN.DGeneralFunctions_WriteCncMode(2)     ' Modalità MDI per controlli num
          Case 3
             'Per il siemens non devo fare nulla
@@ -599,7 +652,7 @@ Public MustInherit Class MachineButton
          m_CN.DGeneralFunctions_CycleStart()
       End If
       System.Threading.Thread.Sleep(300)
-      ' riprostino la modalità manuale
+      ' ripristino la modalità manuale..?? siucuri ??
       nResult = m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
    End Sub
 
@@ -620,6 +673,7 @@ Public MustInherit Class MachineButton
          EgtTdbGetCurrToolParam(MCH_TP.FEED, dFeed)
       End If
       EgtLuaSetGlobNumVar("CMD.F", dFeed)
+
       Dim dSpeed As Double = 0
       If Not String.IsNullOrWhiteSpace(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text) Then
          StringToDouble(m_DirectCutPage.m_ManualAxesMove.SpeedTxBx.Text, dSpeed)
@@ -628,6 +682,18 @@ Public MustInherit Class MachineButton
          EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)
@@ -789,6 +855,7 @@ Public Class NoStateButton
             ExecuteMDICommand(TLuaScriptName)
          End If
       Else
+         ' FANUC, SIEMENS
          ExecuteMDICommand(TLuaScriptName)
       End If
    End Sub

DirectCuts/CopyTemplateUC.xaml.vb

@@ -5,6 +5,8 @@ Public Class CopyTemplateUC
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   Private m_refControlDirectCutUC As ControlsDirectCutUC1
+
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Array stringhe modalità di acquisizione dei punti
@@ -59,6 +61,7 @@ Public Class CopyTemplateUC
 
    Private Sub CopyTemplate_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_refControlDirectCutUC = m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC1
       m_bActive = True
       SaveBtn.IsEnabled = False
       LineBtn.IsChecked = True
@@ -254,8 +257,7 @@ Public Class CopyTemplateUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
-      m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function EraseCopyTemplatePart() As Boolean

DirectCuts/DirectCutPageUC.xaml

@@ -28,10 +28,10 @@
             <ColumnDefinition Width="7*"/>
          </Grid.ColumnDefinitions>
 
-          <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+         <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
             <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
          </Button>
-            <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+         <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
             <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
          </Button>
 
@@ -42,25 +42,27 @@
 
       </Grid>
 
-         <!-- Definizione della Grid laterale -->
-      <Grid Name="LeftButtonGrid" Grid.Row="1" >
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="7*"/>
-         </Grid.RowDefinitions>
-
-         <!-- Definizione della Grid laterale -->
-         <Grid Name="CutTypeGrid" Grid.Row="1" >
+      <!-- Definizione della Grid laterale -->
+      <!--
+        <Grid Name="LeftButtonGrid" Grid.Row="1" >
             <Grid.RowDefinitions>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="7*"/>
+            </Grid.RowDefinitions>
+
+            -->
+      <!-- Definizione della Grid laterale -->
+      <!--<Grid Name="CutTypeGrid" Grid.Row="1" >
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="1*"/>
                 </Grid.RowDefinitions>
                 <Button Name="ManualBtn" Grid.Column="2" Grid.Row="0"                    
                         Style="{DynamicResource OmagCut_YellowIconButton}">
@@ -140,7 +142,7 @@
                                    Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
                     </Grid>
                 </Button>
-             
+
                 <Button Name="PolishingBtn" Grid.Row="6"
                         Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Grid>
@@ -154,36 +156,51 @@
                     </Grid>
                 </Button>
 
-                <Button Name="CopyTemplateBtn" Grid.Row="7"
-                    Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Grid>
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="80"/>
-                        <ColumnDefinition Width="140"/>
-                    </Grid.ColumnDefinitions>
-                    <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
-                    <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
-                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                </Grid>
-            </Button>
-             
-            <Button Name="SawTestBtn" Grid.Row="8"
-                    Style="{DynamicResource OmagCut_YellowIconButton}">
-               <Grid>
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="80"/>
-                        <ColumnDefinition Width="140"/>
-                    </Grid.ColumnDefinitions>
-                    <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
-                        <TextBlock Name="SawTestTxt" Grid.Column="1"
-                               Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            </Grid>
-            </Button>
+                -->
+      <!--<Button Name="CopyTemplateBtn" Grid.Row="7"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="CopyTemplateTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>-->
+      <!--
+                <Button Name="SquaringBtn" Grid.Row="7"
+                        Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Copia-dimaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SquaringTxt" Grid.Column="1"
+                                   Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+                <Button Name="SawTestBtn" Grid.Row="8"
+                    Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Grid>
+                        <Grid.ColumnDefinitions>
+                            <ColumnDefinition Width="80"/>
+                            <ColumnDefinition Width="140"/>
+                        </Grid.ColumnDefinitions>
+                        <Image Source="{DynamicResource Test-lamaImg}" Style="{DynamicResource OmagCut_ButtonIcon}" Grid.Column="0" />
+                        <TextBlock Name="SawTestTxt" Grid.Column="1"
+                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </Grid>
+                </Button>
+
+            </Grid>-->
+      <!--
+
+        </Grid>-->
 
-        </Grid>
-      
-      </Grid>
-      
       <!-- Definizione della Grid laterale per bottoni macchina -->
       <Grid Name="MachineButtonGrid" Grid.Row="1">
          <Grid.RowDefinitions>
@@ -201,7 +218,11 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="5*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
             <!--<ColumnDefinition Width="1*"/>-->
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
@@ -215,23 +236,23 @@
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
             <Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
-          
-          <!--Comando asse X-Y-->
-          <ToggleButton Name="XYBtn" Grid.Column="2"
+
+         <!--Comando asse X-Y-->
+         <ToggleButton Name="XYBtn" Grid.Column="2"
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-                <Image Source="{DynamicResource XYJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+            <Image Source="{DynamicResource XYJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
-          
-          <!--Comando asse Z-C-->
-          <ToggleButton Name="ZCBtn" Grid.Column="3"   
+
+         <!--Comando asse Z-C-->
+         <ToggleButton Name="ZCBtn" Grid.Column="3"   
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-              <Image Source="{DynamicResource ZCJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
-          </ToggleButton>
+            <Image Source="{DynamicResource ZCJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
 
          <!--Comando asse Z-B-->
          <ToggleButton Name="ZBBtn" Grid.Column="4"
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
-                <Image Source="{DynamicResource ZBJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+            <Image Source="{DynamicResource ZBJogImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </ToggleButton>
 
          <!--Comando Remote-->
@@ -240,10 +261,18 @@
             <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
          </ToggleButton>
 
+         <!--Parking-->
+         <ToggleButton Name="ParkingBtn" Grid.Column="6"
+              Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
+            <Image Source="{DynamicResource ParkingImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+         </ToggleButton>
+          
+          
+
          <!--Comando Manula/MDI-->
-         <Button Name="ManualModeBtn" Grid.Column="7"
+         <Button Name="ManualModeBtn" Grid.Column="11"
                 Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-             <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+            <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </Button>
 
       </Grid>

DirectCuts/DirectCutPageUC.xaml.vb

@@ -7,18 +7,20 @@ Public Class DirectCutPageUC
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Friend m_MachineButtons As MachineButtonsUC
    Friend m_ManualAxesMove As ManualAxesMoveUC
-   Friend m_SingleCut As SingleCutUC
-   Friend m_SingleDrill As SingleDrillUC
-   ' nuova finestra per i comandi per il taglio manuale nuovo
-   Friend m_SingleCutAuto As SingleCutAuto
-   Friend m_MultipleCut As MultipleCut
-   Friend m_GridCut As GridCut
-   Friend m_FlatteningCut As FlatteningCut
-   Friend m_Polishing As Polishing
-   Friend m_CopyTemplate As CopyTemplateUC
-   Friend m_SawTest As SawTestUC
+
    Friend m_ControlsMachineButton As ControlsMachineButtonUC
    Friend m_VacuumMachineButton As VacuumMachineButtonUC
+   Friend m_ControlsDirectCutUC As ControlsDirectCutUC
+   Friend m_ControlsDirectCutUC1 As ControlsDirectCutUC1
+
+   Friend m_ActiveControl As Controls
+   Enum Controls
+      DirectCutUC
+      DirectCutUC1
+      MachineButtonUC
+      VacuumButtonUC
+   End Enum
+
 
    ' Stato di visualizzazione della macchina
    Friend m_bShowMachine As Boolean = False
@@ -26,8 +28,6 @@ Public Class DirectCutPageUC
    ' Dati generali CN
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
-   ' Riferimento alla pagina correntemente attiva
-   Friend m_ActiveDirectCutPage As DirectCutPages = DirectCutPages.DirectCut
    ' Variabili che indicano attivazione paginette con bottoni macchina
    Private m_ControlsBtn_IsActive As Boolean
 
@@ -41,94 +41,42 @@ Public Class DirectCutPageUC
    ' elenco dei nuovi bottoni
    Private m_ButtonJogList As New List(Of MachineButton)
 
-   Enum DirectCutPages
-      DirectCut
-      ManualAxesMove
-      SingleCut
-      MultipleCut
-      GridCut
-      FlatteningCut
-      Polishing
-      CopyTemplate
-      SawTest
-      SingleCutAuto
-      SingleDrill
-   End Enum
 
    Private Sub DirectCutPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
-      ' leggo la configurazione del programma per i nuovi tagli manuali
-      m_bManulaCut = GetPrivateProfileInt(S_GENERAL, K_MANUAL_CUT, 0, m_MainWindow.GetIniFile()) <> 0
-
       'Creazione delle Page UserControl
       m_MachineButtons = New MachineButtonsUC
       m_ManualAxesMove = New ManualAxesMoveUC
-      m_SingleCut = New SingleCutUC
-      m_SingleDrill = New SingleDrillUC
-      m_MultipleCut = New MultipleCut
-      m_GridCut = New GridCut
-      m_FlatteningCut = New FlatteningCut
-      m_Polishing = New Polishing
-      m_CopyTemplate = New CopyTemplateUC
-      m_SawTest = New SawTestUC
       m_ControlsMachineButton = New ControlsMachineButtonUC
       m_VacuumMachineButton = New VacuumMachineButtonUC
-      ' Costruisco la finestra per il nuovo tipo di taglio manuale
-      m_SingleCutAuto = New SingleCutAuto
+      m_ControlsDirectCutUC = New ControlsDirectCutUC
+      m_ControlsDirectCutUC1 = New ControlsDirectCutUC1
 
       'Posizionemento nella griglia delle Page UserControl
       m_MachineButtons.SetValue(Grid.RowProperty, 2)
-      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, 7)
+      m_MachineButtons.SetValue(Grid.ColumnSpanProperty, m_MachineButtons.nCountButton)
       m_ManualAxesMove.SetValue(Grid.RowProperty, 1)
-      If m_bManulaCut Then
-         m_SingleCutAuto.SetValue(Grid.RowProperty, 1)
-      Else
-         m_SingleCut.SetValue(Grid.RowProperty, 1)
-      End If
-      m_SingleDrill.SetValue(Grid.RowProperty, 1)
-      m_MultipleCut.SetValue(Grid.RowProperty, 1)
-      m_GridCut.SetValue(Grid.RowProperty, 1)
-      m_FlatteningCut.SetValue(Grid.RowProperty, 1)
-      m_Polishing.SetValue(Grid.RowProperty, 1)
-      m_CopyTemplate.SetValue(Grid.RowProperty, 1)
-      m_SawTest.SetValue(Grid.RowProperty, 1)
+
+      m_ControlsDirectCutUC.SetValue(Grid.RowProperty, 1)
+      m_ControlsDirectCutUC1.SetValue(Grid.RowProperty, 1)
       m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
       m_VacuumMachineButton.SetValue(Grid.RowProperty, 1)
 
       ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [ControlMachButtons])
       Dim bCollapsedNewBottonsConsole As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons("JogButtons", "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
+      ' verifico che sia presente almeno uno dei bottoni della nuova console (SOLO PER MACCHINA CON paragrafo [VacuumMachButtons])
+      Dim bCollapsedVacuumButton As Boolean = Not m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_VACUUMMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
       If Not m_NewMachineButtonsType Then
          'Assegno MachineButtons alla pagina
          LowerButtonGrid.Children.Add(m_MachineButtons)
          ControlsMachineBtn.Visibility = Windows.Visibility.Collapsed
          VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
       End If
-
-      If GetPrivateProfileInt(S_NUMERICALCONTROL, K_TYPE, 0, m_MainWindow.GetMachIniFile()) = 0 Then
-         ManualBtn.IsEnabled = False
-         ManualModeBtn.Visibility = Windows.Visibility.Hidden
+      ' se non sono configurate le ventose allora nascondo il comando
+      If m_NewMachineButtonsType AndAlso bCollapsedVacuumButton Then
+         VacuumMachineBtn.Visibility = Windows.Visibility.Collapsed
       End If
 
-      ' ManualBtn.Content = EgtMsg(90201)
-      ManualTxt.Text = EgtMsg(90201)
-      'SingleCutBtn.Content = EgtMsg(90202)
-      SingleCutTxt.Text = EgtMsg(90202)
-      'SingleDrillBtn.Content = "Foro singolo"
-      SingleDrillTxt.Text = EgtMsg(90258)
-      'MultipleCutBtn.Content = EgtMsg(90203)
-      MultipleCutTxt.Text = EgtMsg(90203)
-      'GridCutBtn.Content = EgtMsg(90204)
-      GridCutTxt.Text = EgtMsg(90204)
-      'FlatteningCutBtn.Content = EgtMsg(90206)
-      FlatteningCutTxt.Text = EgtMsg(90206)
-      'PolishingBtn.Content = EgtMsg(90231)
-      PolishingTxt.Text = EgtMsg(90231)
-      'CopyTemplateBtn.Content = EgtMsg(90209)
-      CopyTemplateTxt.Text = EgtMsg(90209)
-      'SawTestBtn.Content = EgtMsg(90207)
-      SawTestTxt.text = EgtMsg(90207)
-
-
       ' nuovi bottoni 20/05/2021 - modifica specifiche 04/08/2021
       ' leggo il numero di assi attivi nella macchina
       Dim AxesNumber = GetPrivateProfileInt(S_AXES, K_AXESNUM, 5, m_MainWindow.GetMachIniFile())
@@ -176,59 +124,10 @@ Public Class DirectCutPageUC
       ' lo stato di questi comandi vieni carico dalla lettura del PLC (refresh)
       '----------- FINE NUOVI BOTTONI------------
 
-      ' Se rientro da simulazione
-      If m_ActiveDirectCutPage = DirectCutPages.SingleCut Then
-         LeftButtonGrid.Children.Add(m_SingleCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto Then
-         LeftButtonGrid.Children.Add(m_SingleCutAuto)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.MultipleCut Then
-         LeftButtonGrid.Children.Add(m_MultipleCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.GridCut Then
-         LeftButtonGrid.Children.Add(m_GridCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.FlatteningCut Then
-         LeftButtonGrid.Children.Add(m_FlatteningCut)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.Polishing Then
-         LeftButtonGrid.Children.Add(m_Polishing)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.SawTest Then
-         LeftButtonGrid.Children.Add(m_SawTest)
-         Return
-      ElseIf m_ActiveDirectCutPage = DirectCutPages.SingleDrill Then
-         LeftButtonGrid.Children.Add(m_SingleDrill)
-         Return
-      End If
-
-      ' Caso standard
-      m_ActiveDirectCutPage = DirectCutPages.DirectCut
+      LoadLastDirectCutControls()
 
       ' Se macchina fotografica abilitata
       PhotoBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO)
-
-      ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
-      Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
-      Dim bH1Exists As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
-
-      ManualBtn.IsEnabled = bH1Exists
-      ' sviluppo rimasto in sospeso
-      If m_bManulaCut Then
-         ' anche se non è presente un grezzo mantengo abilitato il bottone
-         SingleCutBtn.IsEnabled = True
-      Else
-         SingleCutBtn.IsEnabled = bRawOk
-      End If
-      MultipleCutBtn.IsEnabled = bRawOk
-      GridCutBtn.IsEnabled = bRawOk
-      SingleDrillBtn.IsEnabled = (bRawOk And bH1Exists)
-      FlatteningCutBtn.IsEnabled = (bRawOk And bH1Exists)
-      PolishingBtn.IsEnabled = (bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
-      SawTestBtn.IsEnabled = (bRawOk And bH1Exists)
-      CopyTemplateBtn.IsEnabled = bH1Exists
-
       ' aggiorno la visualizzazione dei parametri
       ReloadParam()
 
@@ -247,9 +146,9 @@ Public Class DirectCutPageUC
       If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
          bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
       End If
-      m_SingleCut.SetEnableParam(bSaw)
-      m_MultipleCut.SetEnableParam(bSaw)
-      m_GridCut.SetEnableParam(bSaw)
+      m_ControlsDirectCutUC.m_SingleCut.SetEnableParam(bSaw)
+      m_ControlsDirectCutUC.m_MultipleCut.SetEnableParam(bSaw)
+      m_ControlsDirectCutUC.m_GridCut.SetEnableParam(bSaw)
    End Sub
 
    Private Sub SetVisibilityJogButtuns()
@@ -257,6 +156,7 @@ Public Class DirectCutPageUC
       ZCBtn.Visibility = Visibility.Collapsed
       ZBBtn.Visibility = Visibility.Collapsed
       RemoteBtn.Visibility = Visibility.Collapsed
+      ParkingBtn.Visibility = Visibility.Collapsed
 
       Dim Item As MachineButton = Nothing
       For Each Item In m_ButtonJogList
@@ -277,6 +177,10 @@ Public Class DirectCutPageUC
                RemoteBtn.Visibility = Visibility.Visible
                RemoteBtn.Foreground = Brushes.White
                RemoteBtn.Content = "Remote"
+            Case K_PARKING
+               ParkingBtn.Visibility = Visibility.Visible
+               ParkingBtn.Foreground = Brushes.White
+               ParkingBtn.ToolTip = "Parking"
          End Select
       Next
    End Sub
@@ -305,63 +209,13 @@ Public Class DirectCutPageUC
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
    End Sub
 
-   Private Sub ManualBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualBtn.Click
-      LeftButtonGrid.Children.Add(m_ManualAxesMove)
-      m_ActiveDirectCutPage = DirectCutPages.ManualAxesMove
-   End Sub
-
-   Private Sub SingleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleCutBtn.Click
-      If m_bManulaCut Then
-         LeftButtonGrid.Children.Add(m_SingleCutAuto)
-         m_ActiveDirectCutPage = DirectCutPages.SingleCutAuto
-      Else
-         LeftButtonGrid.Children.Add(m_SingleCut)
-         m_ActiveDirectCutPage = DirectCutPages.SingleCut
-      End If
-
-   End Sub
-
-   Private Sub MultipleCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles MultipleCutBtn.Click
-      LeftButtonGrid.Children.Add(m_MultipleCut)
-      m_ActiveDirectCutPage = DirectCutPages.MultipleCut
-   End Sub
-
-   Private Sub GridCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles GridCutBtn.Click
-      LeftButtonGrid.Children.Add(m_GridCut)
-      m_ActiveDirectCutPage = DirectCutPages.GridCut
-   End Sub
-
-   Private Sub FlatteningCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles FlatteningCutBtn.Click
-      LeftButtonGrid.Children.Add(m_FlatteningCut)
-      m_ActiveDirectCutPage = DirectCutPages.FlatteningCut
-   End Sub
-
-   Private Sub PolishingBtn_Click(sender As Object, e As RoutedEventArgs) Handles PolishingBtn.Click
-      LeftButtonGrid.Children.Add(m_Polishing)
-      m_ActiveDirectCutPage = DirectCutPages.Polishing
-   End Sub
-
-   Private Sub CopyTemplateBtn_Click(sender As Object, e As RoutedEventArgs) Handles CopyTemplateBtn.Click
-      LeftButtonGrid.Children.Add(m_CopyTemplate)
-      m_ActiveDirectCutPage = DirectCutPages.CopyTemplate
-   End Sub
-
-   Private Sub SawTestBtn_Click(sender As Object, e As RoutedEventArgs) Handles SawTestBtn.Click
-      LeftButtonGrid.Children.Add(m_SawTest)
-      m_ActiveDirectCutPage = DirectCutPages.SawTest
-   End Sub
-
-   Private Sub SingleDrillBtn_Click(sender As Object, e As RoutedEventArgs) Handles SingleDrillBtn.Click
-      LeftButtonGrid.Children.Add(m_SingleDrill)
-      m_ActiveDirectCutPage = DirectCutPages.SingleDrill
-   End Sub
-
    Private Sub ControlsMachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles ControlsMachineBtn.Click
       If ControlsMachineBtn.IsChecked Then
          m_ControlsMachineButton = New ControlsMachineButtonUC
          m_ControlsMachineButton.SetValue(Grid.RowProperty, 1)
          m_NewMachineButtonsType = m_ControlsMachineButton.GetPrivateProfileMachineButtons(S_CONTROLMACHBUTTONS, "Button1", Nothing, Nothing, Nothing, Nothing, Nothing, Nothing, m_MainWindow.GetMachIniFile())
          MachineButtonGrid.Children.Add(m_ControlsMachineButton)
+         m_ActiveControl = Controls.MachineButtonUC
          If VacuumMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
             VacuumMachineBtn.IsChecked = False
@@ -374,6 +228,7 @@ Public Class DirectCutPageUC
    Private Sub VacuumMachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles VacuumMachineBtn.Click
       If VacuumMachineBtn.IsChecked Then
          MachineButtonGrid.Children.Add(m_VacuumMachineButton)
+         m_ActiveControl = Controls.VacuumButtonUC
          If ControlsMachineBtn.IsChecked Then
             MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
             ControlsMachineBtn.IsChecked = False
@@ -383,7 +238,21 @@ Public Class DirectCutPageUC
       End If
    End Sub
 
-   '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
+   Friend Sub LoadDirectCutUC()
+      ManageControls()
+      m_ActiveControl = Controls.DirectCutUC
+      MachineButtonGrid.Children.Add(m_ControlsDirectCutUC)
+   End Sub
+
+   Friend Sub LoadDirectCutUC1()
+      ManageControls()
+      m_ActiveControl = Controls.DirectCutUC1
+      MachineButtonGrid.Children.Add(m_ControlsDirectCutUC1)
+   End Sub
+
+
+#Region "[JogButtons]"
+
    Private Sub XYBtn_Click(sender As Object, e As RoutedEventArgs) Handles XYBtn.Click
       ' riverco in elenco il bottone XYJog
       Dim XYJogButton As MachineButton = Nothing
@@ -513,17 +382,57 @@ Public Class DirectCutPageUC
       End If
    End Sub
 
-   '------------------NUOVI BOTTONI PER GESTIONE JOYSTICK-------------------------------------------------
+   Private Sub ParkingBtn_Click(sender As Object, e As RoutedEventArgs) Handles ParkingBtn.Click
+      Dim ParkingButton As MachineButton = Nothing
+      Dim ItemButton As MachineButton = Nothing
+      For Each ItemButton In m_ButtonJogList
+         If ItemButton.StateFlag = K_PARKING Then
+            ParkingButton = ItemButton
+            Exit For
+         End If
+      Next
+      If IsNothing(ParkingButton) Then Return
+      ' eseguo lo script lua associato
+      Dim CurrentBtn As Primitives.ToggleButton = e.Source
+      Dim sLuaFileName As String = String.Empty
+      ' verifico lo stato del bottone per avviare il giusto script
+      If CurrentBtn.IsChecked() Then
+         sLuaFileName = ParkingButton.TLuaScriptName
+      Else
+         sLuaFileName = ParkingButton.FLuaScriptName
+      End If
+      ParkingButton.ExecuteMDICommand(sLuaFileName)
+   End Sub
+
+   Friend Sub ParkingStateChanged(bParkingState As Boolean)
+      ' devo decodificare il tipo di pulsante, quindi eseguire la conversione...
+      Dim ParkingButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonJogList
+         If MachineButton.StateFlag.Trim = K_PARKING Then
+            ParkingButton = MachineButton
+            Exit For
+         End If
+      Next
+      If Not IsNothing(ParkingButton) Then
+         ParkingButton.SetIsChecked(bParkingState)
+         ParkingButton.IsChecked = bParkingState
+      End If
+   End Sub
+
+#End Region    '[JogButtons]
+
    Private Sub MachViewModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachViewModeBtn.Click
       If m_bShowMachine Then
          ' aggiorno lo stato
          Select Case m_nMachLook
-         Case MCH_LOOK.ALL
-            m_nMachLook = MCH_LOOK.TAB_HEAD
-         Case MCH_LOOK.TAB_HEAD
-            m_nMachLook = MCH_LOOK.TAB_TOOL
-         Case Else
-            m_nMachLook = MCH_LOOK.ALL
+            Case MCH_LOOK.ALL
+               m_nMachLook = MCH_LOOK.TAB_HEAD
+            Case MCH_LOOK.TAB_HEAD
+               m_nMachLook = MCH_LOOK.TAB_TOOL
+            Case MCH_LOOK.TAB_TOOL
+               m_nMachLook = MCH_LOOK.TAB
+            Case Else
+               m_nMachLook = MCH_LOOK.ALL
          End Select
          ' aggiorno lo stato della macchina e la sua visualizzazione
          EgtSetMachineLook(m_nMachLook)
@@ -532,36 +441,40 @@ Public Class DirectCutPageUC
    End Sub
 
    Friend Sub DirectCutPage_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
-      Select Case m_ActiveDirectCutPage
-         Case DirectCutPages.DirectCut Or DirectCutPages.ManualAxesMove
-            ' Non è necessario fare alcunché
-         Case DirectCutPages.SingleCut
-            LeftButtonGrid.Children.Remove(m_SingleCut)
-         Case DirectCutPages.SingleCutAuto
-            LeftButtonGrid.Children.Remove(m_SingleCutAuto)
-         Case DirectCutPages.MultipleCut
-            LeftButtonGrid.Children.Remove(m_MultipleCut)
-         Case DirectCutPages.GridCut
-            LeftButtonGrid.Children.Remove(m_GridCut)
-         Case DirectCutPages.FlatteningCut
-            LeftButtonGrid.Children.Remove(m_FlatteningCut)
-         Case DirectCutPages.Polishing
-            LeftButtonGrid.Children.Remove(m_Polishing)
-         Case DirectCutPages.CopyTemplate
-            LeftButtonGrid.Children.Remove(m_CopyTemplate)
-         Case DirectCutPages.SawTest
-            LeftButtonGrid.Children.Remove(m_SawTest)
-         Case DirectCutPages.SingleDrill
-            LeftButtonGrid.Children.Remove(m_SingleDrill)
+      ManageControls()
+   End Sub
+
+   Friend Sub ManageControls()
+      Select Case m_ActiveControl
+         Case Controls.DirectCutUC
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            m_ControlsDirectCutUC.DirectCutPage_Unloaded(Nothing, Nothing)
+         Case Controls.DirectCutUC1
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC1)
+            m_ControlsDirectCutUC1.DirectCutPage_Unloaded(Nothing, Nothing)
+         Case Controls.MachineButtonUC
+            MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC1)
+            ControlsMachineBtn.IsChecked = False
+         Case Controls.VacuumButtonUC
+            MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
+            MachineButtonGrid.Children.Remove(m_ControlsDirectCutUC)
+            MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
+            VacuumMachineBtn.IsChecked = False
+      End Select
+   End Sub
+
+   Friend Sub LoadLastDirectCutControls()
+      Select Case m_ActiveControl
+         Case Controls.DirectCutUC
+            MachineButtonGrid.Children.Add(m_ControlsDirectCutUC)
+         Case Controls.DirectCutUC1
+            MachineButtonGrid.Children.Add(m_ControlsDirectCutUC1)
+         Case Else
+            m_ActiveControl = Controls.DirectCutUC
+            MachineButtonGrid.Children.Add(m_ControlsDirectCutUC)
       End Select
-      If ControlsMachineBtn.IsChecked Then
-         MachineButtonGrid.Children.Remove(m_ControlsMachineButton)
-         ControlsMachineBtn.IsChecked = False
-      End If
-      If VacuumMachineBtn.IsChecked Then
-         MachineButtonGrid.Children.Remove(m_VacuumMachineButton)
-         VacuumMachineBtn.IsChecked = False
-      End If
    End Sub
 
    Private Sub ManualModeBtn_Click(sender As Object, e As RoutedEventArgs) Handles ManualModeBtn.Click

DirectCuts/FlatteningCut.xaml

@@ -65,7 +65,7 @@
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"

DirectCuts/FlatteningCut.xaml.vb

@@ -186,11 +186,14 @@ Public Class FlatteningCut
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If( m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString( m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
+      ' imposto la Z di sicurezza corretta
+      EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
+      EgtMdbSave()
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -568,6 +571,7 @@ Public Class FlatteningCut
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -610,7 +614,7 @@ Public Class FlatteningCut
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
       EgtMdbSetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
       EgtMdbSave()
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    ' ricavo l'ingombro di lavorazione in funzione dell'utensile selezionato
@@ -623,7 +627,8 @@ Public Class FlatteningCut
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dFootPrint)
       ElseIf Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrMilling) Then
          Dim sCurrMill = m_MainWindow.m_CurrentMachine.sCurrMill
-         GetDrillFromDrilling(sCurrMill, m_MainWindow.m_CurrentMachine.sCurrMilling)
+         'GetDrillFromDrilling(sCurrMill, m_MainWindow.m_CurrentMachine.sCurrMilling)
+         GetMillFromMilling(sCurrMill, m_MainWindow.m_CurrentMachine.sCurrMilling)
          ' recupero informazioni della fresa in uso
          EgtTdbSetCurrTool(sCurrMill)
          EgtTdbGetCurrToolParam(MCH_TP.DIAM, dFootPrint)

DirectCuts/GridCut.xaml

@@ -61,12 +61,12 @@
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <Grid Grid.Row="5" Grid.ColumnSpan="2">
@@ -89,7 +89,7 @@
             <TextBlock Name="DimPzXTxBl" Grid.Column="2" Grid.Row="0"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
 
-            <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75"
+            <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             <EgtWPFLib:EgtTextBox Name="DimPzXTxBx" Grid.Column="2" Grid.Row="1" Width="75"
             Style="{StaticResource OmagCut_CalculatorTextBox}" />
@@ -99,7 +99,7 @@
             <TextBlock Name="DimPzYTxBl" Grid.Column="2" Grid.Row="2"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
 
-            <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75"
+            <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             <EgtWPFLib:EgtTextBox Name="DimPzYTxBx" Grid.Column="2" Grid.Row="3" Width="75"
             Style="{StaticResource OmagCut_CalculatorTextBox}" />

DirectCuts/GridCut.xaml.vb

@@ -168,7 +168,7 @@ Public Class GridCut
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -494,6 +494,7 @@ Public Class GridCut
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -534,7 +535,7 @@ Public Class GridCut
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateGridCut() As Boolean

DirectCuts/MachineButtonsUC.xaml.vb

@@ -7,6 +7,8 @@ Public Class MachineButtonsUC
    Private m_DirectCutPage As DirectCutPageUC
    Friend m_CN As CN_generico
 
+   Public nCountButton As Integer = 11
+
    Private m_bOnlyLaser As Boolean = False
    Private m_bFirst As Boolean = True
 
@@ -33,6 +35,7 @@ Public Class MachineButtonsUC
    Private Const BTN_STATE_DOOR_OPENED As String = "DoorOpened"
    Private Const BTN_STATE_DOOR_CLOSED As String = "DoorClosed"
    Private Const BTN_STATE_PARKING As String = "Parking"
+   Private Const BTN_STATE_HOME As String = "Home"
    Private Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
    Private Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
    Private Const BTN_ENABLE_PC As String = "EnablePC"
@@ -76,6 +79,9 @@ Public Class MachineButtonsUC
          GetToggleButton(nIndex + 1).Visibility = Windows.Visibility.Hidden
       Next
 
+      ' notifico nella variabile pubblica il numero di pulsanti inseriti nella barra
+      nCountButton = m_nCount
+
       ' Se variabile di stato "Nothing"/"DoorOpened"/"DoorClosed" imposto immagine fissa
       For nIndex As Integer = 0 To m_nCount - 1
          If StateFlagArray(nIndex) = BTN_STATE_NOTHING OrElse
@@ -267,9 +273,62 @@ Public Class MachineButtonsUC
                   End If
                   Return
                End If
+               ' CONTROLLO FANUC
+            Case 4
+               ' ------------------------------------ FANUC ------------------------------------
+               ' eventuale scrittura di linea di comando MDI
+               If Not String.IsNullOrEmpty(CmdString) Then
+                  ' attivo mpdalità MDI
+                  m_CN.DGeneralFunctions_WriteCncMode(2)
+                  System.Threading.Thread.Sleep(100)
+                  ' salvo la stringa di comando ricevuta dal file lua
+                  m_CN.sz_ManualDataInput = CmdString
+                  ' esguo la funzione che ha il compito di scrivere il comando MDI
+                  m_CN.MDI_command()
+               End If
+               ' attivo modalità AUTO
+               m_CN.DGeneralFunctions_WriteCncMode(7)
+               System.Threading.Thread.Sleep(100)
+               If String.IsNullOrEmpty(EValue) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue As Boolean
+                     If EValue.Trim = "1" Then bEValue = True
+                     m_CN.NC_write_var_bit(ENumber, CBool(EValue))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber, CShort(EValue))
+                  End If
+                  EgtOutLog("Fanuc_DNumber= " & ENumber & " DValue= " & EValue)
+               End If
+               ' eventale caricamento seconda variabile
+               If String.IsNullOrEmpty(EValue2) Then
+                  ' EActive: impulsivo "D#####"
+                  m_CN.NC_pulse_bit(ENumber2)
+                  EgtOutLog("Fanuc_DNumber= " & ENumber2)
+               Else
+                  ' EActive + EValue: scrittura comando invariabile Short oppure Bit
+                  If ENumber2.Contains(".") Then
+                     ' D#####.#
+                     Dim bEValue2 As Boolean
+                     If EValue2.Trim = "1" Then bEValue2 = True
+                     m_CN.NC_write_var_bit(ENumber2, CBool(EValue2))
+                  Else
+                     ' D#####
+                     m_CN.NC_write_var_short(ENumber2, CShort(EValue2))
+                  End If
+                  EgtOutLog("Fanuc_DNumber2= " & ENumber2 & " DValue2= " & EValue2)
+               End If
+               Return
          End Select
       End If
 
+
       Dim nResult As Short
       ' Imposto modalità MDI per controlli num
       Select Case m_MainWindow.m_CNCommunication.m_nNCType
@@ -286,6 +345,8 @@ Public Class MachineButtonsUC
             m_CN.DGeneralFunctions_CycleStart()
          Case 3
             'Per il siemens non devo fare nulla
+         Case 4
+            ' Nicola: 27/03/2023 attivazione della funzione M# indicata?
       End Select
 
       If b2Start Then
@@ -320,6 +381,17 @@ Public Class MachineButtonsUC
          EgtTdbGetCurrToolParam(MCH_TP.SPEED, dSpeed)
       End If
       EgtLuaSetGlobNumVar("CMD.S", dSpeed)
+      ' versione 2.5e1
+      EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
+      Dim sToolPos As String = String.Empty
+      If EgtTdbGetCurrToolParam(MCH_TP.TCPOS, sToolPos) Then
+         EgtLuaGetGlobStringVar("CMD.TCPOS", sToolPos)
+      End If
+      Dim dToolDiam As Double = 0
+      If EgtTdbGetCurrToolParam(MCH_TP.DIAM, dToolDiam) Then
+         EgtLuaSetGlobNumVar("CMD.DIAM", dToolDiam * 1000)
+      End If
+
       Dim dL1, dL2, dL3, dR1, dR2 As Double
       m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2)
       EgtLuaSetGlobNumVar("CMD.L1", dL1)
@@ -640,6 +712,40 @@ Public Class MachineButtonsUC
       End If
    End Sub
 
+   Friend Sub HomeStateChanged(HomeState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_HOME)
+      If nIndex = -1 Then Return
+      If HomeState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
    Friend Sub EnableZoneStateChanged(ZoneState As Integer)
       Dim sFlag As String = String.Empty
       If ZoneState = 1 Then

DirectCuts/ManualAxesMoveUC.xaml

@@ -69,10 +69,10 @@
          <EgtWPFLib:EgtTextBox x:Name="L3TxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
          <Button x:Name="R1Btn" Grid.Row="4" Height="60" Width="60" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-         <EgtWPFLib:EgtTextBox x:Name="R1TxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox x:Name="R1TxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
          <Button x:Name="R2Btn" Grid.Row="5" Height="60" Width="60" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-         <EgtWPFLib:EgtTextBox x:Name="R2TxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox x:Name="R2TxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
    
          <Grid Grid.Row="7" Grid.ColumnSpan="2">

DirectCuts/ManualAxesMoveUC.xaml.vb

@@ -21,10 +21,12 @@ Public Class ManualAxesMoveUC
       ' Messaggi
       L1SawThChBx.Content = EgtMsg(90232)   ' Spessore lama
       L2SawThChBx.Content = EgtMsg(90232)   ' Spessore lama
+
       AddHandler m_Timer.Tick, AddressOf Timer_tick
    End Sub
 
    Private Sub ManualAxesMove_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      m_CN = m_MainWindow.m_DirectCutPageUC.m_CN
       ' Valori feed e speed da lama corrente
       Dim dTemp As Double = 0
       EgtTdbSetCurrTool(m_MainWindow.m_CurrentProjectPageUC.ToolTxBx.Text)
@@ -207,7 +209,7 @@ Public Class ManualAxesMoveUC
       System.Threading.Thread.Sleep(150)
       m_CN.DGeneralFunctions_CycleStart()
       System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
-      m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
+      ' m_CN.DGeneralFunctions_WriteCncMode(7)     ' Modalità manuale
       m_MoveClicked = False
    End Sub
 
@@ -338,7 +340,7 @@ Public Class ManualAxesMoveUC
    End Function
 
    Private Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Sub G0Btn_Checked(sender As Object, e As RoutedEventArgs) Handles G0Btn.Checked

DirectCuts/MultipleCut.xaml

@@ -68,12 +68,12 @@
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="5"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <Grid Grid.Row="6" Grid.ColumnSpan="2" Visibility="Visible">
@@ -124,70 +124,70 @@
 
                      <TextBlock Name="Num1TxBl" Grid.Column="0" Grid.Row="0"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz1TxBx" Grid.Column="1" Grid.Row="0" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz1TxBx" Grid.Column="1" Grid.Row="0" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz1TxBx" Grid.Column="3" Grid.Row="0" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num2TxBl" Grid.Column="0" Grid.Row="1"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz2TxBx" Grid.Column="1" Grid.Row="1" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz2TxBx" Grid.Column="1" Grid.Row="1" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz2TxBx" Grid.Column="3" Grid.Row="1" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num3TxBl" Grid.Column="0" Grid.Row="2"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz3TxBx" Grid.Column="1" Grid.Row="2" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz3TxBx" Grid.Column="1" Grid.Row="2" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz3TxBx" Grid.Column="3" Grid.Row="2" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num4TxBl" Grid.Column="0" Grid.Row="3"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz4TxBx" Grid.Column="1" Grid.Row="3" Width="75"
+                     <EgtWPFLib:EgtTextBox Name="NumPz4TxBx" Grid.Column="1" Grid.Row="3" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz4TxBx" Grid.Column="3" Grid.Row="3" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num5TxBl" Grid.Column="0" Grid.Row="4"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz5TxBx" Grid.Column="1" Grid.Row="4" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz5TxBx" Grid.Column="1" Grid.Row="4" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz5TxBx" Grid.Column="3" Grid.Row="4" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num6TxBl" Grid.Column="0" Grid.Row="5"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz6TxBx" Grid.Column="1" Grid.Row="5" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz6TxBx" Grid.Column="1" Grid.Row="5" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz6TxBx" Grid.Column="3" Grid.Row="5" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num7TxBl" Grid.Column="0" Grid.Row="6"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz7TxBx" Grid.Column="1" Grid.Row="6" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz7TxBx" Grid.Column="1" Grid.Row="6" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz7TxBx" Grid.Column="3" Grid.Row="6" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num8TxBl" Grid.Column="0" Grid.Row="7"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz8TxBx" Grid.Column="1" Grid.Row="7" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz8TxBx" Grid.Column="1" Grid.Row="7" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz8TxBx" Grid.Column="3" Grid.Row="7" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num9TxBl" Grid.Column="0" Grid.Row="8"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz9TxBx" Grid.Column="1" Grid.Row="8" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz9TxBx" Grid.Column="1" Grid.Row="8" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz9TxBx" Grid.Column="3" Grid.Row="8" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
                      <TextBlock Name="Num10TxBl" Grid.Column="0" Grid.Row="9"
                      Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-                     <EgtWPFLib:EgtTextBox Name="NumPz10TxBx" Grid.Column="1" Grid.Row="9" Width="75"
+                  <EgtWPFLib:EgtTextBox Name="NumPz10TxBx" Grid.Column="1" Grid.Row="9" Width="75" IsLength="False"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                      <EgtWPFLib:EgtTextBox Name="DimPz10TxBx" Grid.Column="3" Grid.Row="9" Width="75"
                      Style="{StaticResource OmagCut_CalculatorTextBox}"/>

DirectCuts/MultipleCut.xaml.vb

@@ -195,7 +195,7 @@ Public Class MultipleCut
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -540,6 +540,7 @@ Public Class MultipleCut
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -580,7 +581,7 @@ Public Class MultipleCut
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateMultipleCut() As Boolean

DirectCuts/Polishing.xaml.vb

@@ -6,6 +6,8 @@ Public Class Polishing
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   Private m_refControlDirectCutUC As ControlsDirectCutUC1
+
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Flag di simulazione in corso
@@ -30,6 +32,7 @@ Public Class Polishing
    Private Sub Polishing_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Attivo la pagina
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_refControlDirectCutUC = m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC1
       m_bActive = True
       ' Se rientro da simulazione
       If m_bSimul Then
@@ -60,7 +63,7 @@ Public Class Polishing
       If PolishingCmBx.SelectedIndex < 0 Then
          m_bPoliOk = False
          UpdateSimulOkBtn()
-      End If 
+      End If
       ' Rendo semitrasparente il grezzo
       Dim nRawSolidId = EgtGetFirstNameInGroup(m_CurrProjPage.m_nRawId, NAME_RAW_SOLID)
       EgtSetAlpha( nRawSolidId, 60)
@@ -72,7 +75,7 @@ Public Class Polishing
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_refControlDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC1.DirectCutPages.DirectCut
          ' Cancello eventuali lucidature
          RemovePolishings()
          ' Riattivo eventuali lavorazioni presenti
@@ -148,6 +151,7 @@ Public Class Polishing
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -188,7 +192,7 @@ Public Class Polishing
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreatePolishing( sKitName As String) As Boolean

DirectCuts/SawTestUC.xaml

@@ -70,7 +70,7 @@
 
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="OffsetTxBl" Grid.Column="0" Grid.Row="5"

DirectCuts/SawTestUC.xaml.vb

@@ -5,6 +5,7 @@ Public Class SawTestUC
    ' Riferimenti a pagine
    Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   Private m_refControlDirectCutUC As ControlsDirectCutUC1
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Flag di simulazione in corso
@@ -76,6 +77,7 @@ Public Class SawTestUC
    Private Sub SawTest_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Attivo la pagina
       m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_refControlDirectCutUC = m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC1
       m_bActive = True
       ' Se rientro da simulazione
       If m_bSimul Then
@@ -139,7 +141,7 @@ Public Class SawTestUC
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_TEST_OFFSET, DoubleToString( m_dOffset, 2), m_MainWindow.GetIniFile())
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_refControlDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC1.DirectCutPages.DirectCut1
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -419,6 +421,7 @@ Public Class SawTestUC
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -459,7 +462,7 @@ Public Class SawTestUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_refControlDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleCut() As Boolean

DirectCuts/SingleCutAuto.xaml.vb

@@ -363,7 +363,7 @@ Public Class SingleCutAuto
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -715,6 +715,7 @@ Public Class SingleCutAuto
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -758,7 +759,7 @@ Public Class SingleCutAuto
       ' reimposto il precedetne utensile e lavorazione
       m_MainWindow.m_CurrentMachine.sCurrSaw = m_PrecSaw
       m_MainWindow.m_CurrentMachine.sCurrSawing = m_PrecSawing
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleCut() As Boolean

DirectCuts/SingleCutUC.xaml

@@ -69,12 +69,12 @@
    
          <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
    
          <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="5"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+         <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
          <TextBlock Name="OffsetTxBl" Grid.Column="0" Grid.Row="6"

DirectCuts/SingleCutUC.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Windows.Threading
+Imports EgtUILib
 
 Public Class SingleCutUC
 
@@ -43,6 +44,10 @@ Public Class SingleCutUC
    Private Const MIN_CUT_LEN As Double = 10.0
    Private Const MAX_SIDE_ANG As Double = 60.0
    ' Costanti che indicano la modalità di acquisizione dei punti
+
+   ' Utilizzato per aggiornare la posizione della macchina
+   Private m_RefreshTimer As New DispatcherTimer
+
    Private Enum PT_MODE As Integer
       SAW = 0
       LASER = 1
@@ -68,14 +73,14 @@ Public Class SingleCutUC
       SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
       OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dAngV = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dLen = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_LENGTH, m_dLen, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_ANGV, m_dAngV, m_MainWindow.GetIniFile())
       m_dOffset = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_OFFSET, m_dOffset, m_MainWindow.GetIniFile())
       m_bSawTh = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_SING_SAWTH, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
-      m_ptTipP1.y = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_SING_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_SING_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
    End Sub
 
    Private Sub SingleCut_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -92,6 +97,10 @@ Public Class SingleCutUC
          m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
          EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
          EgtDraw()
+         ' riavvio il timer per visualizzare la poszione della macchina
+         If Not IsNothing(m_RefreshTimer) Then
+            m_RefreshTimer.Start()
+         End If
          Return
       End If
       ' Disabilito registrazione progetto modificato
@@ -114,7 +123,7 @@ Public Class SingleCutUC
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -138,26 +147,45 @@ Public Class SingleCutUC
       ' Deseleziono bottone primo punto
       Point1Btn.IsChecked = False
 
-      ' la visualizzazione dei comandi è gestira dalla DirectCutPageUC richiamando la funzione ReloadParam
+      ' la visualizzazione dei comandi è gestita dalla DirectCutPageUC richiamando la funzione ReloadParam
+
+      ' forzo la macchina ad essere visibile fin da subito
+      m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
+      m_MainWindow.m_DirectCutPageUC.m_nMachLook = MCH_LOOK.TAB
+      ' Creo il timer il timer per aggiornare il posizionamento della macchina
+      AddHandler m_RefreshTimer.Tick, AddressOf RefreshTimer_tick
+      m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(1000)
 
       ' Aggiorno visualizzazione
       EgtDraw()
+
+      ' Avvi il timer
+      m_RefreshTimer.Start()
+   End Sub
+
+   Private Sub RefreshTimer_tick()
+      ' se è impostata la visualizzazione della sola tavola allora non aggiorno il disegno
+      If m_MainWindow.m_DirectCutPageUC.m_nMachLook = MCH_LOOK.TAB Then Return
+      ' Aggiorno visualizzazione
+      SetMachineInCurrPos()
+      ' Aggiorno il disegno
+      EgtDraw()
    End Sub
 
    Friend Sub SingleCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_LENGTH, DoubleToString( m_dLen, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_ANGV, DoubleToString( m_dAngV, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_LENGTH, DoubleToString(m_dLen, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_ANGV, DoubleToString(m_dAngV, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_OFFSET, DoubleToString(m_dOffset, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_SAWTH, If(m_bSawTh, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_SING_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -171,6 +199,8 @@ Public Class SingleCutUC
          EgtSetMachineLook(MCH_LOOK.TAB)
          EgtDraw()
       End If
+      ' interrompo il Timer per aggiornare la visualizzazione del posizionamento macchina 
+      m_RefreshTimer.Stop()
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
@@ -279,7 +309,7 @@ Public Class SingleCutUC
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP1
          m_ptTipP1 = m_ptPrev
@@ -298,6 +328,7 @@ Public Class SingleCutUC
       m_MainWindow.m_DirectCutPageUC.m_bShowMachine = True
       EgtSetMachineLook(m_MainWindow.m_DirectCutPageUC.m_nMachLook)
       EgtDraw()
+
       ' Seleziono il bottone per indicare che il primo punto è stato acquisito
       Point1Btn.IsChecked = True
       ' Abilito e deseleziono secondo punto
@@ -358,7 +389,7 @@ Public Class SingleCutUC
          m_dAngV = 90 - dTAngV
          SideAngleTxBx.Text = DoubleToString(m_dAngV, 2)
 
-      ' Altrimenti punto da click di mouse
+         ' Altrimenti punto da click di mouse
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
@@ -476,7 +507,7 @@ Public Class SingleCutUC
       EgtDraw()
    End Sub
 
-   Private Sub SawThick_Click( sender As Object, e As RoutedEventArgs) Handles SawThChBx.Click
+   Private Sub SawThick_Click(sender As Object, e As RoutedEventArgs) Handles SawThChBx.Click
       ' Recupero lo stato di check
       m_bSawTh = SawThChBx.IsChecked()
       ' Disegno il taglio
@@ -524,6 +555,7 @@ Public Class SingleCutUC
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -535,9 +567,9 @@ Public Class SingleCutUC
       m_CurrProjPage.SetWarningMessage( "Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -564,7 +596,7 @@ Public Class SingleCutUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleCut() As Boolean
@@ -582,7 +614,7 @@ Public Class SingleCutUC
       Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       EgtTdbSetCurrTool(sSaw)
       Dim dThick As Double = 0
-      ' se è impostata una lavorazione di lama
+      ' Se è impostata una lavorazione di lama
       If Not String.IsNullOrEmpty(sSawing) Then
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
       End If
@@ -598,14 +630,19 @@ Public Class SingleCutUC
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
-      If Math.Abs(m_dOffset) > 10 * EPS_SMALL Then
-         Dim dTotOffset = m_dOffset
-         If m_bSawTh Then dTotOffset += If( m_dOffset > 0, dThick, -dThick)
+      ' Applico la correzione di spessore lama -> anche se Offset=0! ver_2.5b1
+      Dim dTotOffset = m_dOffset
+      If m_bSawTh Then
+         dTotOffset += If(m_dOffset > 0, dThick, -dThick)
+         EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
+      Else
          EgtOffsetCurve(nCutId, dTotOffset, OFF_TYPE.EXTEND)
       End If
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, m_dAngV)
+      ' Imposto se disabilitare l'inversine di direzione del taglio
+      If Not m_MainWindow.m_CurrentMachine.bEnableInvert Then EgtSetInfo(nCutId, INFO_ENABLE_INVERT, 0)
       ' Creo layer per crocetta di riferimento
       Dim nCrossLayerId = EgtCreateGroup(nPartId)
       ' Aggiungo crocetta/e

DirectCuts/SingleDrillUC.xaml.vb

@@ -136,7 +136,7 @@ Public Class SingleDrillUC
       ' Se non vado in simulazione
       If Not m_bSimul Then
          ' Dichiaro sottopagina da non riattivare
-         m_MainWindow.m_DirectCutPageUC.m_ActiveDirectCutPage = DirectCutPageUC.DirectCutPages.DirectCut
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
          ' Rimuovo layer temporaneo per crocette
          EgtErase(m_nTempLay)
          ' Rimuovo eventuale pezzo per taglio diretto
@@ -342,6 +342,7 @@ Public Class SingleDrillUC
       m_bSimul = True
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
       m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
@@ -382,7 +383,7 @@ Public Class SingleDrillUC
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
-      m_MainWindow.m_DirectCutPageUC.LeftButtonGrid.Children.Remove(Me)
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
    End Sub
 
    Private Function CreateSingleDrill() As Boolean

DirectCuts/SquaringUC.xaml

@@ -0,0 +1,162 @@
+<UserControl x:Class="SquaringUC"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
+   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   mc:Ignorable="d" 
+   d:DesignHeight="597.3" d:DesignWidth="256">
+
+   <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{StaticResource OmagCut_LightGray}">-->
+   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
+
+      <!-- Definizione della Grid MultipleCut -->
+      <Grid Name="SingleCutGrid" >
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="2*"/>
+            <ColumnDefinition Width="1*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="2*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="0.5*"/>
+            <RowDefinition Height="1*"/>
+         </Grid.RowDefinitions>
+
+         <!--<Grid Grid.Row="0" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <ToggleButton Name="Point1Btn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+
+                <ToggleButton Name="Point2Btn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </ToggleButton>
+            </Grid>-->
+
+         <!--<ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}"
+            Margin="6,0,6,0">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>-->
+
+         <!--<TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+         <TextBlock Name="OffsetTxBl" Grid.Column="0" Grid.Row="3"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="OffsetTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
+         <TextBlock Name="ExtraLenTxBl" Grid.Column="0" Grid.Row="4"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+         <EgtWPFLib:EgtTextBox Name="ExtraLenTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
+         <!--<TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
+            <TextBlock Name="SideAngleTxBl" Grid.Column="0" Grid.Row="4"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>-->
+
+         <!--<Grid Grid.Row="5" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1.5*"/>
+                    <ColumnDefinition Width="2"/>
+                    <ColumnDefinition Width="1.5*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                </Grid.RowDefinitions>
+
+                <Border Grid.Column="1" Grid.Row="0" Grid.RowSpan="4" Background="Black" />
+
+                <TextBlock Name="NumPzXTxBl" Grid.Column="0" Grid.Row="0"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <TextBlock Name="DimPzXTxBl" Grid.Column="2" Grid.Row="0"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+
+                <EgtWPFLib:EgtTextBox Name="NumPzXTxBx" Grid.Column="0" Grid.Row="1" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                <EgtWPFLib:EgtTextBox Name="DimPzXTxBx" Grid.Column="2" Grid.Row="1" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}" />
+
+                <TextBlock Name="NumPzYTxBl" Grid.Column="0" Grid.Row="2"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <TextBlock Name="DimPzYTxBl" Grid.Column="2" Grid.Row="2"
+            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+
+                <EgtWPFLib:EgtTextBox Name="NumPzYTxBx" Grid.Column="0" Grid.Row="3" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                <EgtWPFLib:EgtTextBox Name="DimPzYTxBx" Grid.Column="2" Grid.Row="3" Width="75"
+            Style="{StaticResource OmagCut_CalculatorTextBox}" />
+
+            </Grid>
+
+            <TextBlock Name="SideTxBl" Grid.Row="6" Grid.ColumnSpan="2"
+             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <CheckBox Name="SideChBx" Grid.Row="6" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Right" Margin="0,0,6,0"/>-->
+
+         <Grid Grid.Row="7" Grid.ColumnSpan="2">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+            <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+            <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+         </Grid>
+
+         <Grid Grid.Row="11" Grid.ColumnSpan="2">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+
+            <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+         </Grid>
+
+      </Grid>
+
+   </Border>
+</UserControl>

DirectCuts/SquaringUC.xaml.vb

@@ -0,0 +1,442 @@
+Imports EgtUILib
+
+Public Class SquaringUC
+
+   ' Riferimenti a pagine
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Private WithEvents m_CurrProjPage As CurrentProjectPageUC
+   ' Flag di pagina attiva
+   Private m_bActive As Boolean = False
+   ' Flag di simulazione in corso
+   Private m_bSimul As Boolean = False
+
+   ' Origine tavola e dati grezzo
+   Private m_bRawOk As Boolean = False
+   Private m_ptTabOri As Point3d
+   Private m_ptRawMin As Point3d
+   Private m_ptRawMax As Point3d
+   ' Parametri P1 acquisito
+   Private m_ptTipP1 As Point3d
+   Private m_vtToolP1 As Vector3d
+   ' Parametri P2 acquisito
+   Private m_ptTipP2 As Point3d
+   Private m_vtToolP2 As Vector3d
+   ' Parametri della lavorazione
+   Private m_bCutOk As Boolean = False
+   Private m_dDepth As Double = 0
+   Private m_dOffsetSquaring As Double = 150
+   Private m_dExtraLength As Double = 0
+   Private m_dAngO As Double = 180
+   Private m_dAngV As Double = 0
+   Private m_nNumX As Integer = 0
+   Private m_dDimX As Double = 0
+   Private m_nNumY As Integer = 0
+   Private m_dDimY As Double = 0
+   Private m_bHeadSide As Boolean = False
+
+   ' Punto selezionato nel disegno
+   Private m_ptPrev As Point3d
+   ' Layer per crocette temporanee
+   Private m_nTempLay As Integer = GDB_ID.NULL
+
+   ' Costanti
+   Private Const MAX_TAB_DEPTH As Double = 10.0
+   Private Const MIN_CUT_LEN As Double = 10.0
+   Private Const MAX_SIDE_ANG As Double = 60.0
+
+   'Costante che indica il lato in cui posizionare i tagli
+   Private Enum CutSide As Integer
+      Left
+      Right
+   End Enum
+
+   Private Sub GridCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      OffsetTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 28)
+      ' 90260=Extra length
+      ExtraLenTxBl.Text = EgtMsg(90260)
+      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
+      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+
+      ' Carico i dati dell'ultimo taglio
+      m_dOffsetSquaring = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_OFFSET_SQUARING, m_dOffsetSquaring, m_MainWindow.GetIniFile())
+      m_dExtraLength = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_EXTRA_LEN_SQUARING, m_dExtraLength, m_MainWindow.GetIniFile())
+      m_dDepth = 0
+      m_dAngO = 90
+      m_dAngV = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_ANGV, m_dAngV, m_MainWindow.GetIniFile())
+      m_nNumX = 1
+      m_dDimX = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMX, m_dDimX, m_MainWindow.GetIniFile())
+      m_nNumY = 1
+      m_dDimY = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_GRID_DIMY, m_dDimY, m_MainWindow.GetIniFile())
+      m_bHeadSide = False
+   End Sub
+
+   Private Sub Squaring_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
+      ' Attivo la pagina
+      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_bActive = True
+      ' Se rientro da simulazione
+      If m_bSimul Then
+         m_bSimul = False
+         ' Disabilito registrazione progetto modificato
+         EgtDisableModified()
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+         Return
+      End If
+      ' Disabilito registrazione progetto modificato
+      EgtDisableModified()
+      ' Creo layer temporaneo per crocette
+      m_nTempLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
+      ' Origine tavola
+      m_bRawOk = True
+      If Not EgtGetTableRef(1, m_ptTabOri) Then
+         m_bRawOk = False
+         EgtOutLog("Error on TableRef1")
+      End If
+
+      ' Dati del grezzo
+      If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then
+         m_bRawOk = False
+         EgtOutLog("Error on RawBox")
+      End If
+      ' calcolo lalavorazione di squadratura
+      RefreshSquaring()
+   End Sub
+
+   Private Sub RefreshSquaring()
+      If Not m_bRawOk Then Return
+
+      Dim m_ThickSaw As Double
+      EgtTdbGetCurrToolParam(MCH_TP.THICK, m_ThickSaw)
+
+      m_dDepth = CamAuto.GetRawHeight()
+      m_dDimX = Math.Abs(m_ptRawMax.x - m_ptRawMin.x) - 2 * (m_dOffsetSquaring)
+      m_dDimY = Math.Abs(m_ptRawMax.y - m_ptRawMin.y) - 2 * (m_dOffsetSquaring)
+
+      Dim ptStart As New Point3d(m_ptRawMin.x + m_dOffsetSquaring - m_ThickSaw, m_ptRawMin.y + m_dOffsetSquaring, m_ptRawMin.z)
+      Dim ptEnd As New Point3d(ptStart.x + m_dDimX, ptStart.y, m_ptRawMin.z)
+
+      SetCoordVisibility(True)
+      ShowCoord()
+
+      OffsetTxBx.Text = LenToString(m_dOffsetSquaring, 1)
+      ExtraLenTxBx.Text = LenToString(m_dExtraLength, 1)
+      m_bCutOk = False
+      UpdateSimulOkBtn()
+
+      SquaringPoint(ptStart, ptEnd)
+      m_ptPrev = ptStart
+   End Sub
+
+   Friend Sub Squaring_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
+      ' Salvo i dati correnti
+      ' Salvo i dati correnti
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_OFFSET_SQUARING, DoubleToString(m_dOffsetSquaring, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_EXTRA_LEN_SQUARING, DoubleToString(m_dExtraLength, 2), m_MainWindow.GetIniFile())
+      ' Se non vado in simulazione
+      If Not m_bSimul Then
+         ' Dichiaro sottopagina da non riattivare
+         m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage = ControlsDirectCutUC.DirectCutPages.DirectCut
+         ' Rimuovo layer temporaneo per crocette
+         EgtErase(m_nTempLay)
+         ' Rimuovo eventuale pezzo per taglio diretto
+         EraseDirectCutPart()
+         ' Riattivo eventuali lavorazioni presenti
+         ActivateAllMachinings()
+         ' Abilito registrazione progetto modificato
+         EgtEnableModified()
+         ' Nascondo la macchina
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+      End If
+      ' Dichiaro pagina non attiva
+      m_bActive = False
+   End Sub
+
+   Private Sub UpdateSimulOkBtn()
+      If m_bCutOk Then
+         SimulBtn.IsEnabled = True
+         SimulBtn.Foreground = Brushes.Black
+         OkBtn.IsEnabled = True
+         OkBtn.Foreground = Brushes.Black
+      Else
+         SimulBtn.IsEnabled = False
+         SimulBtn.Foreground = Brushes.DarkGray
+         OkBtn.IsEnabled = False
+         OkBtn.Foreground = Brushes.DarkGray
+      End If
+   End Sub
+
+   Private Sub SquaringPoint(ptMin As Point3d, ptMax As Point3d)
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+      ' Verifico configurazione tavola e grezzo
+      If Not m_bRawOk Then Return
+
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+      '------------- BOTTOM LEFT -------------------
+      ' Assegno punto selezionato nel disegno a m_ptTipP1
+      m_ptTipP1 = ptMin
+      ' Porto il tip nell'origine tavola
+      m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
+      ' Reimposto eventuale precedente utensile
+      EgtSetCalcTool(sTool, sHead, nExit)
+      '-------------  TOP RIGHT   -------------------
+      ' Assegno punto selezionato nel disegno a m_ptTipP2
+      m_ptTipP2 = ptMax
+      ' Porto il tip nell'origine tavola
+      m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
+      ' Reimposto eventuale precedente utensile
+      EgtSetCalcTool(sTool, sHead, nExit)
+
+      ' Se il secondo punto non coincide con il primo, disegno il taglio
+      Dim vtDiff As Vector3d = m_ptTipP2 - m_ptTipP1
+      vtDiff.z = 0
+      Dim dLen As Double
+      Dim dAngVertDeg As Double
+      Dim dAngOrizzDeg As Double
+      vtDiff.ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
+      If dLen > EPS_SMALL Then
+         m_dAngO = dAngOrizzDeg
+         CreateGridCut()
+         ' visuliazzo tavola 
+         m_MainWindow.m_DirectCutPageUC.m_bShowMachine = False
+         EgtSetMachineLook(MCH_LOOK.TAB)
+         EgtDraw()
+      End If
+   End Sub
+
+   Private Sub OffsetTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsetTxBx.EgtClosed
+      ' Verifico che l'offset impostato non sia superiore a quello massimo
+      Dim dMaxOffset As Double = Math.Min(m_dDimX, m_dDimY) / 2 - 15
+      Dim dOffset As Double = 0
+      StringToLen(OffsetTxBx.Text, dOffset)
+      If dOffset < 0 Then
+         dOffset = 0
+      ElseIf dOffset > dMaxOffset Then
+         dOffset = dMaxOffset
+      End If
+      m_dOffsetSquaring = dOffset
+      OffsetTxBx.Text = LenToString(m_dOffsetSquaring, 2)
+      ' Disegno il taglio
+      RefreshSquaring()
+      EgtDraw()
+   End Sub
+
+   Private Sub ExtraLength_EgtClosed(sender As Object, e As EventArgs) Handles ExtraLenTxBx.EgtClosed
+      ' Verifico che il valore indicato sia almeno maggiore dell'offset indicato
+      Dim dOffset As Double = 0
+      StringToLen(OffsetTxBx.Text, dOffset)
+      Dim MadExtraLeng As Double = Math.Abs(dOffset)
+      Dim dExtraLen As Double
+      StringToLen(ExtraLenTxBx.Text, dExtraLen)
+      If dExtraLen < 0 AndAlso dExtraLen < -MadExtraLeng Then
+         dExtraLen = 0
+      End If
+      m_dExtraLength = dExtraLen
+      ExtraLenTxBx.Text = LenToString(m_dExtraLength, 2)
+      ' Disegno il taglio
+      RefreshSquaring()
+      EgtDraw()
+   End Sub
+
+   Private Sub SimulBtn_Click(sender As Object, e As RoutedEventArgs) Handles SimulBtn.Click
+      ' Verifico ci sia un taglio valido
+      If Not m_bCutOk Then Return
+      ' Salvo il progetto con le lavorazioni
+      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\" & "DirectProj.nge"
+      m_MainWindow.m_CurrentProjectPageUC.SaveFile(sMchPath, False)
+      ' Predispongo passaggio a simulazione
+      m_bSimul = True
+      m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
+      m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
+      m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(m_MainWindow.m_DirectCutPageUC)
+      m_MainWindow.m_PrevActivePage = MainWindow.Pages.DirectCut
+      m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_SimulationPage)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.Simulation
+   End Sub
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+#If TRIAL Then
+      m_CurrProjPage.SetWarningMessage("Trial Version")
+#Else
+      ' Verifico non sia versione Ufficio
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
+      End If
+      ' Verifico ci sia un taglio valido
+      If Not m_bCutOk Then Return
+      ' Salvo il progetto con le lavorazioni
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\" & "DirectProj.nge"
+      m_MainWindow.m_CurrentProjectPageUC.SaveFile(sMchPath, False)
+      ' Genero file CNC (lancio anche se errore in precedenza)
+      Dim sCncPath As String = m_MainWindow.GetCncDir() & "\DirectCut" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+      Dim bOk As Boolean = EgtGenerate(sCncPath, "OmagCut ver." & m_MainWindow.GetVersion())
+      ' Se errore in generazione, segnalo l'errore ed esco
+      If Not bOk Then
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
+         Return
+      End If
+      ' Download programma (eventuali errori sono segnalati dalla funzione)
+      If m_MainWindow.m_CNCommunication.SendProgram(sCncPath, 900) Then
+         ' copio il progetto corrente come progetto in lavorazione
+         Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
+         My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
+         ' lancio eventuale lua post-trasmissione
+         m_MainWindow.ExecSentProgScript(True)
+      End If
+#End If
+   End Sub
+
+   Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
+      m_MainWindow.m_DirectCutPageUC.m_ControlsDirectCutUC.LeftButtonGrid.Children.Remove(Me)
+   End Sub
+
+   Private Function CreateGridCut() As Boolean
+      ' Verifico sia definito il punto iniziale e il grezzo
+      If Not m_bRawOk Then
+         m_bCutOk = False
+         Return False
+      End If
+      ' Spessore grezzo
+      Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
+      ' Rimuovo eventuale vecchio pezzo per taglio diretto
+      EraseDirectCutPart()
+      ' Disattivo eventuali lavorazioni presenti
+      DeactivateAllMachinings()
+      ' Creo nuovo pezzo per il taglio diretto
+      Dim nPartId = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetName(nPartId, NAME_DIRECTCUT)
+      Dim nLayerId = EgtCreateGroup(nPartId)
+      EgtSetName(nLayerId, NAME_OUTLOOP)
+      ' Creo il taglio parallelo alla lama
+      Dim ptStart As Point3d = m_ptTipP1
+      ptStart.z = 0
+      ' Funzione che crea i tagli successivi al primo
+      MultiplyCut(nLayerId)
+      ' Calcolo punto di inserimento nel grezzo
+      Dim ptMin, ptMax As Point3d
+      EgtGetBBoxGlob(nPartId, GDB_BB.STANDARD, ptMin, ptMax)
+      Dim ptIns As Point3d = ptMin + (m_ptTabOri - m_ptRawMin)
+      ptIns.z = dRawHeight
+      ' Inserisco il pezzo nel grezzo
+      EgtAddPartToRawPart(nPartId, ptIns, m_MainWindow.m_CurrentProjectPageUC.m_nRawId)
+      ' Inserisco la lavorazione
+      m_bCutOk = AddMachinings(nPartId) AndAlso UpdateAllMachiningsToolpaths()
+      EgtSetCurrPhase(1)
+      ' Eventuale eliminazione Home finale
+      If Not m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome Then
+         RemoveFinalHome()
+      End If
+      UpdateSimulOkBtn()
+      Return m_bCutOk
+   End Function
+
+   Private Function MultiplyCut(nLayerId As Integer) As Boolean
+      ' Recupero lo spessore del taglio della lama o del waterjet correntemente attiva
+      Dim nType As Integer = 0
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      Dim dThick As Double = 0
+      EgtTdbGetCurrToolParam(If(nType = MCH_TY.SAW_STD, MCH_TP.THICK, MCH_TP.DIAM), dThick)
+      ' Ricalcolo lo spessore in base all'inclinazione
+      dThick = dThick / Math.Cos(m_dAngV * Math.PI / 180)
+      ' Imposto angolo di rotazione a seconda del lato dei tagli paralleli
+      Dim dRotAngOX As Double = 90
+      ' Recupero dati da interfaccia
+      Dim dDimPzX As Double = m_dDimX
+      Dim nNumPzX As Integer = m_nNumX
+      Dim dDimPzY As Double = m_dDimY
+      Dim nNumPzY As Integer = m_nNumY
+      ' Definisco vettore di spostamento
+      Dim vtDelta As Vector3d
+      ' Calcolo primo taglio parallelo
+      Dim ptStart As Point3d = m_ptTipP1
+      ptStart.z = 0
+      If dDimPzY <> 0 And nNumPzY > 0 And dDimPzX <> 0 And nNumPzX > 0 Then
+         Dim dLenX As Double = dThick + (dDimPzX + dThick) * nNumPzX
+         Dim nCutParaId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, dLenX + 0.1)
+         ' Imposto affondamento e angolo di fianco sul taglio
+         EgtSetInfo(nCutParaId, INFO_DEPTH, m_dDepth)
+         EgtSetInfo(nCutParaId, INFO_SIDE_ANGLE, m_dAngV)
+         ' Allungo la geometria
+         EgtExtendCurveStartByLen(nCutParaId, m_dOffsetSquaring + m_dExtraLength)
+         EgtExtendCurveEndByLen(nCutParaId, m_dOffsetSquaring + +m_dExtraLength)
+         ' Calcolo vettore di spostamento
+         vtDelta = Vector3d.FromPolar((dDimPzY + dThick), m_dAngO)
+         ' Ruoto il vettore di traslazione 
+         vtDelta.Rotate(Vector3d.Z_AX, dRotAngOX)
+         For Index As Integer = 1 To nNumPzY
+            Dim vtPerpMove As Vector3d = Index * vtDelta
+            ' Creo copie
+            Dim nCut2Id = EgtCopyGlob(nCutParaId, nLayerId)
+            EgtMove(nCut2Id, vtPerpMove, GDB_RT.GLOB)
+         Next
+         ' Calcolo primo taglio perpendicolare
+         Dim dLenY As Double = dThick + (dDimPzY + dThick) * nNumPzY
+         ' Arretro il punto di partenza di uno spessore lama
+         Dim vtDeltaPos As Vector3d = Vector3d.FromPolar(dThick + 0.1, m_dAngO - 90)
+         Dim nCutPerpId = EgtCreateLinePDL(nLayerId, ptStart + vtDeltaPos, m_dAngO + 90, dLenY + 0.2)
+         ' Imposto affondamento e angolo di fianco sul taglio
+         EgtSetInfo(nCutPerpId, INFO_DEPTH, m_dDepth)
+         EgtSetInfo(nCutPerpId, INFO_SIDE_ANGLE, m_dAngV)
+         ' Allungo la geometria
+         EgtExtendCurveStartByLen(nCutPerpId, m_dOffsetSquaring + m_dExtraLength)
+         EgtExtendCurveEndByLen(nCutPerpId, m_dOffsetSquaring + +m_dExtraLength)
+         ' Calcolo secondo vettore di spostamento
+         vtDelta = Vector3d.FromPolar((dDimPzX + dThick), m_dAngO)
+         For Index As Integer = 1 To nNumPzX
+            Dim vtPerpMove As Vector3d = vtDelta * Index
+            ' Creo copie
+            Dim nCut3Id = EgtCopyGlob(nCutPerpId, nLayerId)
+            EgtMove(nCut3Id, vtPerpMove, GDB_RT.GLOB)
+         Next
+      End If
+      Return True
+   End Function
+
+   Private Sub SetCoordVisibility(bShow As Boolean)
+      XcoordTxBl.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      XcoordTxBx.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      YcoordTxBl.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      YcoordTxBx.Visibility = If(bShow, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+   End Sub
+
+   Private Sub ShowCoord()
+      Dim ptText As Point3d = m_ptPrev
+      ptText.ToLoc(New Frame3d(m_ptTabOri))
+      XcoordTxBx.Text = LenToString(ptText.x, 2)
+      YcoordTxBx.Text = LenToString(ptText.y, 2)
+   End Sub
+
+   Private Function SetMachineInCurrPos() As Boolean
+      ' Recupero la posizione macchina
+      Dim dL1, dL2, dL3, dR1, dR2 As Double
+      If Not m_MainWindow.m_CNCommunication.GetAxesPositions(dL1, dL2, dL3, dR1, dR2) Then Return False
+      ' Recupero il nome degli assi macchina
+      Dim sL1 As String = String.Empty
+      Dim sL2 As String = String.Empty
+      Dim sL3 As String = String.Empty
+      Dim sR1 As String = String.Empty
+      Dim sR2 As String = String.Empty
+      If Not m_MainWindow.m_CNCommunication.GetAxesNames(sL1, sL2, sL3, sR1, sR2) Then Return False
+      ' Visualizzo macchina in posizione
+      EgtSetAxisPos(sL1, dL1)
+      EgtSetAxisPos(sL2, dL2)
+      EgtSetAxisPos(sL3, dL3)
+      EgtSetAxisPos(sR1, dR1)
+      EgtSetAxisPos(sR2, dR2)
+      Return True
+   End Function
+
+End Class
+

DrawImport/AlzFrontUC.xaml

@@ -199,12 +199,12 @@
                                   Visibility="Collapsed"
                                   Grid.Column="2" Grid.Row="1"
                                   HorizontalAlignment="Right"
-                                  Width="60" Height="30" Margin="0,0,0,0"
+                                  Width="60" Height="30" Margin="0,0,0,0" IsLength="False"
                                   Style="{StaticResource OmagCut_CalculatorTextBox}"/>
             <EgtWPFLib:EgtTextBox Name="Parameter2FTxBx" 
                                   Grid.Column="3" Grid.Row="1" 
                                   HorizontalAlignment="Right"
-                                  Width="60" Height="30" Margin="0,0,0,0"
+                                  Width="60" Height="30" Margin="0,0,0,0" IsLength="False"
                                   Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
             <!-- Spessore aletta -->

DrawImport/AlzFrontUC.xaml.vb

@@ -96,8 +96,14 @@ Public Class AlzFrontUC
       Dim LabelId As Integer = GDB_ID.NULL
 
       ' definisco i valori delle altezza e degli angoli di spoglia per le alzatine e i frontalini (letti da file ini del programma)
-      GetPrivateProfileString(S_ALZFRONT, K_ALZ_HEIGHT, "0", Parameter1ATxBx.Text, m_MainWindow.GetIniFile)
-      GetPrivateProfileString(S_ALZFRONT, K_FRONT_HEIGHT, "0", Parameter1FTxBx.Text, m_MainWindow.GetIniFile)
+      Dim sVal As String = String.Empty
+      Dim dVal As Double = 0
+      GetPrivateProfileString(S_ALZFRONT, K_ALZ_HEIGHT, "0", sVal, m_MainWindow.GetIniFile)
+      Utility.StringToDouble(sVal, dVal)
+      Parameter1ATxBx.Text = Utility.LenToString(dVal, 4)
+      GetPrivateProfileString(S_ALZFRONT, K_FRONT_HEIGHT, "0", sVal, m_MainWindow.GetIniFile)
+      Utility.StringToDouble(sVal, dVal)
+      Parameter1FTxBx.Text = Utility.LenToString(dVal, 4)
       GetPrivateProfileString(S_ALZFRONT, K_ALZ_DELTA_ANG, "0", Parameter2ATxBx.Text, m_MainWindow.GetIniFile)
       GetPrivateProfileString(S_ALZFRONT, K_FRONT_DELTA_ANG, "0", Parameter2FTxBx.Text, m_MainWindow.GetIniFile)
       Parameter5TxBx.Text = Utility.LenToString(m_MainWindow.m_CurrentProjectPageUC.m_dRawHeight, 2)
@@ -607,9 +613,9 @@ Public Class AlzFrontUC
    Private Sub ParameterA1TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter1ATxBx.EgtClosed
       ' Nuovo angolo di inclinazione
       Dim dValue As Double
-      StringToDouble(Parameter1ATxBx.Text, dValue)
+      StringToLen(Parameter1ATxBx.Text, dValue)
       ' salvo il valore nel file ini e inserisco il valore nel file lua
-      WritePrivateProfileString("Alz&Front", "A_Height", Parameter1ATxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString("Alz&Front", "A_Height", DoubleToString(dValue, 3), m_MainWindow.GetIniFile())
       ' aggiorno il disegno
       LoadCurrentCompo()
    End Sub
@@ -618,9 +624,9 @@ Public Class AlzFrontUC
    Private Sub Parameter1FTxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter1FTxBx.EgtClosed
       ' Nuovo angolo di inclinazione
       Dim dValue As Double
-      StringToDouble(Parameter1FTxBx.Text, dValue)
+      StringToLen(Parameter1FTxBx.Text, dValue)
       ' salvo il valore nel file ini e inserisco il valore nel file lua
-      WritePrivateProfileString("Alz&Front", "F_Height", Parameter1FTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString("Alz&Front", "F_Height", DoubleToString(dValue, 3), m_MainWindow.GetIniFile())
       ' aggiorno il disegno
       LoadCurrentCompo()
    End Sub

DrawImport/CompoDimensionUC.xaml.vb

@@ -37,7 +37,7 @@ Public Class CompoDimensionUC
       InternComponentBtn.Content = EgtMsg(MSG_COMPONENTPAGEUC + 47)     ' Componenti interni
       If Not String.IsNullOrEmpty(sCompoDir) Then
          bEnableAlzFront = True
-         AlzFrontBtn.Content = "Alzatine & Frontalini"
+         AlzFrontBtn.Content = EgtMsg(91137)
       Else
          AlzFrontBtn.Visibility = Visibility.Collapsed
       End If
@@ -75,6 +75,7 @@ Public Class CompoDimensionUC
          m_DrawPage.sCompoName.StartsWith("PBagno") Then
          ShowInternalBtn(True)
          ShowAlzFrontBtn(bEnableAlzFront)
+         m_DrawPage.MessageGrid.Visibility = Visibility.Hidden
       Else
          ShowInternalBtn(False)
          ShowAlzFrontBtn(False)
@@ -106,8 +107,10 @@ Public Class CompoDimensionUC
    Friend Sub ShowAlzFrontBtn(ByVal value As Boolean)
       If value Then
          AlzFrontBtn.Visibility = Visibility.Visible
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Hidden
       Else
          AlzFrontBtn.Visibility = Visibility.Hidden
+         m_MainWindow.m_DrawPageUC.MessageGrid.Visibility = Visibility.Visible
       End If
    End Sub
 

DrawImport/CompoTrfData.xaml.vb

@@ -24,6 +24,7 @@ Public Class CompoTrfData
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       DialogResult = True
+      SaveData()
       Close()
    End Sub
 
@@ -32,7 +33,30 @@ Public Class CompoTrfData
       Close()
    End Sub
 
+   Private Sub SaveData()
+      WritePrivateProfileString(S_TRF, K_ORDCODE, OrdCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_ORDDESC, OrdDescTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_PARTCODE, PartCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_MATCODE, MatCodeTxBx.Text, m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_TRF, K_SURFCODE, SurfCodeTxBx.Text, m_MainWindow.GetIniFile())
+      ' prima di salvare lo spessore converto in mm e poi di nuovo in stringa
+      Dim dVal As Double = 0
+      StringToLen(ThicknessTxBx.Text, dVal)
+      WritePrivateProfileString(S_TRF, K_TRFTHICKNESS, DoubleToString(dVal, 4), m_MainWindow.GetIniFile())
+   End Sub
+
    Friend Sub SetData(sOrdCode As String, sOrdDesc As String, sPartCode As String, sMatCode As String, sSurfCode As String, dTh As Double)
+      ' se verifico che non sono stati iniziliazzti i campi allora provvedo a leggere il file ini del programma
+      If sOrdCode = "" And sOrdDesc = "" And sPartCode = "" And sMatCode = "" And sSurfCode = "" Then
+         GetPrivateProfileString(S_TRF, K_ORDCODE, sOrdCode, sOrdCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_ORDDESC, sOrdDesc, sOrdDesc, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_PARTCODE, sPartCode, sPartCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_MATCODE, sMatCode, sMatCode, m_MainWindow.GetIniFile())
+         GetPrivateProfileString(S_TRF, K_SURFCODE, sSurfCode, sSurfCode, m_MainWindow.GetIniFile())
+         ' recupero il dato dello spessore che deve essere in mm
+         dTh = GetPrivateProfileDouble(S_TRF, K_TRFTHICKNESS, dTh, m_MainWindow.GetIniFile())
+      End If
+      ' inizializzo i campi della finestra
       OrdCodeTxBx.Text = sOrdCode
       OrdDescTxBx.Text = sOrdDesc
       PartCodeTxBx.Text = sPartCode

DrawImport/DrawPageUC.xaml

@@ -64,7 +64,7 @@
                <ToggleButton Name="DimensionBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowToggleButton}" Visibility="Collapsed"/>
             </Grid>
 
-            <Grid Name="VariablesGrd" Grid.Row="1" Grid.ColumnSpan="2"/>
+            <Grid Name="VariablesGrd" Grid.Row="1" Grid.RowSpan="2" Grid.ColumnSpan="2"/>
             
             <Grid Name="MessageGrid" Grid.Row="2" Grid.ColumnSpan="2">
                <TextBlock Name="MessageTxBl" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
@@ -124,7 +124,7 @@
 
             <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"
                TextAlignment="Right"/>
-            <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60"
+            <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
             </Grid>

DrawImport/DrawPageUC.xaml.vb

@@ -283,6 +283,19 @@ Public Class DrawPageUC
       m_sCsvOrder = ""
       m_sCsvList = ""
       m_sCsvName = ""
+
+      ' Visuliazzazione dei bottoni per modifica dei componenti
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         SideAngleBtn.Visibility = Visibility.Hidden
+         FiloTopBtn.Visibility = Visibility.Hidden
+         EngraveBtn.Visibility = Visibility.Hidden
+         DripCutBtn.Visibility = Visibility.Hidden
+      Else
+         SideAngleBtn.Visibility = Visibility.Visible
+         FiloTopBtn.Visibility = Visibility.Visible
+         EngraveBtn.Visibility = Visibility.Visible
+         DripCutBtn.Visibility = Visibility.Visible
+      End If
    End Sub
 
    ' recupero il click sulla scena ed assegno il metodo a secondo della pagina aperta
@@ -553,6 +566,7 @@ Public Class DrawPageUC
       OkBtn.IsEnabled = True
    End Sub
 
+   ' Navigazione nelle due pagine per la selezione dei componenti da disegnare
    Friend Sub BackBtn_Click(sender As Object, e As RoutedEventArgs) Handles BackBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       DrawPage_Unloaded(sender, e)
@@ -644,10 +658,17 @@ Public Class DrawPageUC
          m_CompoDimension.GetNameEdit(j).Text = m_CVars(i - 1).m_sName
          m_CompoDimension.GetNameEdit(j).Visibility = Windows.Visibility.Visible
          m_CompoDimension.GetValueEdit(j).Text = m_CVars(i - 1).ToString()
+         'Dim dVal As Double
+         'StringToLen(m_CVars(i - 1).ToString(), dVal)
+         'm_CompoDimension.GetValueEdit(j).Text = LenToString(dVal, 3)
          m_CompoDimension.GetValueEdit(j).Visibility = Windows.Visibility.Visible
          If m_CVars(i - 1).m_nType = 5 Then
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).Keyboard = EgtTextBox.KeyboardType.Alphanumeric
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).KeyboardDimension = 600
+         ElseIf m_CVars(i - 1).m_nType = 4 Then
+            TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).Keyboard = EgtTextBox.KeyboardType.Calculator
+            TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).IsLength = False
+            TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).KeyboardDimension = 300
          Else
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).Keyboard = EgtTextBox.KeyboardType.Calculator
             TryCast(m_CompoDimension.GetValueEdit(j), EgtTextBox).KeyboardDimension = 300
@@ -1117,6 +1138,30 @@ Public Class DrawPageUC
       Return True
    End Function
 
+   Private Function MakeSectionFrameInsert() As Boolean
+      ' m_MainWindow.m_ImportPageUC.LoadFrame()
+      ' recupero il primo layer del primo pezzo
+      Dim nLayerId As Integer = EgtGetFirstLayer(EgtGetFirstPart())
+      If nLayerId = GDB_ID.NULL Then Return False
+      ' percorso in cui salvare tempora
+      Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\Frame.Nge"
+      If Not EgtSaveObjToFile(nLayerId, sTmpFile, NGE.BIN) Then Return False
+      ' Passo al contesto principale
+      EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      ' Inserisco il pezzo
+      If Not My.Computer.FileSystem.FileExists(sTmpFile) Then Return False
+      EgtInsertFile(sTmpFile)
+      ' Ne recupero l'Id
+      Dim nPartId As Integer = EgtGetLastPart()
+      ' Creo la cornice
+      m_MainWindow.m_FrameCutPageUC.CreateFrame(nPartId)
+      ' Ricalcolo lavorazioni
+      AddFrameMachinings(m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dStartTrim, m_MainWindow.m_FrameCutPageUC.m_FrameMachiningUC.m_dEndTrim)
+      ' Cancello il file
+      My.Computer.FileSystem.DeleteFile(sTmpFile)
+      Return True
+   End Function
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_bBackFromInternalCompo = False
       m_bInternalCompo = False
@@ -1132,7 +1177,12 @@ Public Class DrawPageUC
       Dim InsNbr As Integer = Int32.Parse(PartNumTxBx.Text)
       ' Passo al contesto principale
       'MakeInsert(InsNbr, sPartName)
-      MakeMultipleInsert(InsNbr, sPartName)
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         MakeSectionFrameInsert()
+      Else
+         MakeMultipleInsert(InsNbr, sPartName)
+      End If
+
       ' Aggiorno ambiente principale
       EgtZoom(ZM.ALL)
       ' Elimino nome del componente precedente
@@ -1146,7 +1196,7 @@ Public Class DrawPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
 
    End Sub
 
@@ -1167,14 +1217,16 @@ Public Class DrawPageUC
       ' Istruzioni per chiudere ImportPageUC e aprire CadCutPageUC
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_DrawPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
-      m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+      m_MainWindow.m_ActivePage = If(m_MainWindow.FrameCutBtn.IsChecked, MainWindow.Pages.FrameCut, MainWindow.Pages.CadCut)
    End Sub
 
    Private Sub TrfDataBtn_Click(sender As Object, e As RoutedEventArgs) Handles TrfDataBtn.Click
       If m_bTrfData Then
          Dim DlgTrfData As New CompoTrfData(m_MainWindow)
+         ' carico i dati appena salvati nella pagina
          DlgTrfData.SetData(m_TrfOrderCode, m_TrfOrderDesc, m_TrfPartCode, m_TrfMatCode, m_TrfSurfCode, m_TrfThickness)
          If DlgTrfData.ShowDialog() Then
+            ' recupero i dati salvati nella pagina
             DlgTrfData.GetData(m_TrfOrderCode, m_TrfOrderDesc, m_TrfPartCode, m_TrfMatCode, m_TrfSurfCode, m_TrfThickness)
          End If
       ElseIf m_bCsvData Then
@@ -1253,6 +1305,8 @@ Public Class DrawPageUC
    Private Sub EngraveBtn_Click(sender As Object, e As RoutedEventArgs) Handles EngraveBtn.Click
       m_SceneButtons.MeasureBtn.IsChecked = False
       If EngraveBtn.IsChecked Then
+         ' Aumento lo spazio disponibile per inserirei i parametri (tolgo spazio ad eventuali messaggi)
+         Grid.SetRowSpan(VariablesGrd, 2)
          ' Imposto modalità
          m_SideAngleUC.m_Mode = SideAngleUC.ModeOpt.ENGRAVE
          If m_ActiveComponentPage = Pages.CompoDimension Then
@@ -1284,6 +1338,7 @@ Public Class DrawPageUC
          EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_QUOTATURE), GDB_ST.OFF)
          EgtSetStatus(EgtGetFirstNameInGroup(PartId, COMPO_LAYER_ETICHETTE), GDB_ST.OFF)
       Else
+         Grid.SetRowSpan(VariablesGrd, 2)
          VariablesGrd.Children.Remove(m_SideAngleUC)
          If m_PrevSideAnglePage = Pages.CompoDimension Then
             VariablesGrd.Children.Add(m_CompoDimension)
@@ -1480,7 +1535,10 @@ Public Class DrawPageUC
             Case 2        ' intero
                Return m_nVal.ToString()
             Case 3        ' lunghezza
-               Return DoubleToString(EgtToUiUnits(m_dVal), 4)
+               'Dim dVal As Double
+               'StringToLen(m_sVal, dVal)
+               Return LenToString(m_dVal, 4)
+               'Return DoubleToString(EgtToUiUnits(m_dVal), 4)
             Case 4        ' double
                Return DoubleToString(m_dVal, 4)
             Case 5        ' stringa
@@ -1505,12 +1563,13 @@ Public Class DrawPageUC
                End If
             Case 3        ' lunghezza
                Dim dVal As Double
-               If StringToDouble(sVal, dVal) Then
-                  If bConvertUnits Then
-                     m_dVal = EgtFromUiUnits(dVal)
-                  Else
-                     m_dVal = dVal
-                  End If
+               If bConvertUnits Then
+                  StringToLen(sVal, dVal)
+                  m_dVal = dVal
+                  Return True
+               Else
+                  StringToDouble(sVal, dVal)
+                  m_dVal = dVal
                   Return True
                End If
             Case 4        ' double

DrawImport/FiloTopUC.xaml.vb

@@ -39,7 +39,8 @@ Public Class FiloTopUC
 
       ' Imposto messaggi
       ParameterTxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 10)       ' Offset
-      Parameter2TxBl.Text = EgtMsg( MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter2TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 11)      ' Affondamento
+      Parameter3TxBl.Text = EgtMsg(91138)
 
       If m_CallingPage = MainWindow.Pages.Draw Then
          ' Imposto questa come pagina correntemente visualizzata nella drawpage

DrawImport/ImportPageUC.xaml

@@ -49,15 +49,28 @@
             <Grid.RowDefinitions>
                <RowDefinition Height="0.5*"/>
                <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="8*"/>
+               <RowDefinition Height="7.25*"/>
+               <RowDefinition Height="0.75*"/>
                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
             <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
             <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
-                ItemsSource="{Binding ItemList}"/>
+                     ItemsSource="{Binding ItemList}"/>
 
-            <Border Name="MessageBrd" Grid.Row="4" BorderThickness="0,1,0,0" BorderBrush="Gray">
+                <Grid Grid.Row="3" Margin="0,0,8,0">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="4*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <EgtWPFLib:EgtTextBox Name="FindTxBx" Grid.Column="0"
+                               Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}"/>
+                    <Button Name="ClearFindBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Margin="0,6,2,6">
+                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}" Width="30" />
+                    </Button>
+                </Grid> 
+            
+            <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
                <TextBlock Name="MessageTxBx" TextAlignment="Center"
                    Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
             </Border>
@@ -101,7 +114,7 @@
 
                <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
                   TextAlignment="Right"/>
-               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60"
+               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
                   Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             </Grid>
 

DrawImport/ImportPageUC.xaml.vb

@@ -297,6 +297,36 @@ Public Class ImportPageUC
       End Select
    End Sub
 
+   Private Sub FindTxBx_EgtClosed(sender As Object, e As EventArgs) Handles FindTxBx.EgtClosed
+      ' Elimino spazi iniziali e finali
+      FindTxBx.Text = FindTxBx.Text.Trim()
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      Dim UpdateListFile As New List(Of IconListBoxItem)
+      ' Se esiste un nome
+      If Not String.IsNullOrWhiteSpace(FindTxBx.Text) Then
+         For Each Item As IconListBoxItem In FileListBox.ItemsSource
+            If Item.Name.ToLower.Contains(FindTxBx.Text.ToLower) Then
+               UpdateListFile.Add(Item)
+            End If
+         Next
+      End If
+      If UpdateListFile.Count > 0 Then
+         FileListBox.ItemsSource = UpdateListFile
+      Else
+         FileListBox.ItemsSource = m_MainWindow.m_ImportItemList
+      End If
+   End Sub
+
+   Private Sub ClearFindBtn_Click() Handles ClearFindBtn.Click
+      ' svuoto la text
+      FindTxBx.Text = ""
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      ' e aggiorno la lista dei file
+      FileListBox.ItemsSource = m_MainWindow.m_ImportItemList
+   End Sub
+
    Private Function ClearView() As Boolean
       ' Pulisco il DB geometrico locale
       EgtNewFile()
@@ -809,7 +839,7 @@ Public Class ImportPageUC
          PartId = EgtGetNextPart(PartId)
       End While
 
-      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      ' identificativo univoico del gruppo di pezzi, se più di un "Repeat"
       Dim sGUICode As New List(Of String)
 
       ' Scrivo testi per nesting
@@ -851,6 +881,7 @@ Public Class ImportPageUC
          EgtInsertFile(sTmpFile)
 
          Dim FirstOfImport As Integer = EgtGetNextPart(nFirst2Id)
+         If FirstOfImport = GDB_ID.NULL Then FirstOfImport = EgtGetFirstPart()
          Dim Index As Integer = 1
          While FirstOfImport <> GDB_ID.NULL And Index <= sGUICode.Count
             If Not String.IsNullOrEmpty(sGUICode(Index - 1)) Then
@@ -887,6 +918,7 @@ Public Class ImportPageUC
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
+
       ' Ciclo sui pezzi inseriti
       nId = nFirstId
       While nId <> GDB_ID.NULL

DrawImport/MainComponentPageUC.xaml.vb

@@ -41,6 +41,7 @@ Public Class MainComponentPageUC
       m_MainWindow.m_DrawPageUC.FiloTopBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.EngraveBtn.IsEnabled = False
       m_MainWindow.m_DrawPageUC.DripCutBtn.IsEnabled = False
+      m_MainWindow.m_DrawPageUC.m_bBackFromInternalCompo = False
    End Sub
 
    Private Function GetButton(ByVal nInd As Integer) As Button
@@ -167,7 +168,7 @@ Public Class MainComponentPageUC
 
    Private Sub Compo_Click(sender As Object, e As RoutedEventArgs) Handles Compo1.Click, Compo2.Click, Compo3.Click, Compo4.Click, Compo5.Click, Compo6.Click, Compo7.Click, Compo8.Click
       CurrentBtn = DirectCast(e.Source, Button)
-      Dim CompoName As String = S_COMPO & GetIndexFromButton(CurrentBtn).ToString
+      Dim CompoName As String = If(m_MainWindow.FrameCutBtn.IsChecked, S_FRAMECOMPO, S_COMPO) & GetIndexFromButton(CurrentBtn).ToString
       m_sCurrCompoFam = CompoName
       m_SecondaryComponentPage.m_sCurrCompo = String.Empty
       Dim nCount As Integer = GetPrivateProfileInt(CompoName, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
@@ -251,13 +252,18 @@ Public Class MainComponentPageUC
    End Sub
 
    Private Sub LoadPage()
+      If m_MainWindow.FrameCutBtn.IsChecked Then
+         LoadFramePage()
+         Return
+      End If
+
       Dim nDeltaSecondPage As Integer = 8
       ' Leggo numero di componenti presenti
       Dim nCompoNumber As Integer = GetPrivateProfileInt(S_COMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
       ' Calcolo indici a seconda della pagina in cui sono
       If m_bIsFirstPage Then
          ClearButton(nCompoNumber)
-      nDeltaSecondPage = 0
+         nDeltaSecondPage = 0
       Else
          ClearButton(nCompoNumber)
          nDeltaSecondPage = 8
@@ -325,16 +331,86 @@ Public Class MainComponentPageUC
 
    End Sub
 
+   Private Sub LoadFramePage()
+      Dim nDeltaSecondPage As Integer = 8
+      ' Leggo numero di componenti presenti
+      Dim nCompoNumber As Integer = GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile())
+      ' Calcolo indici a seconda della pagina in cui sono
+      If m_bIsFirstPage Then
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 0
+      Else
+         ClearButton(nCompoNumber)
+         nDeltaSecondPage = 8
+      End If
+
+      ' Creazione converter da String a ImageSource
+      Dim ImageConverter As New ImageSourceConverter
+      Dim ThicknessConverter As New ThicknessConverter
+
+      'Assegnazione immagine e testo ai Button
+      For index As Integer = 1 To 8
+         Dim CustomThickness As New Thickness(0)
+         Dim nCompoName As Integer = GetPrivateProfileInt(S_FRAMECOMPO & index + nDeltaSecondPage, "Name", 0, m_MainWindow.GetIniFile())
+         Dim sCompoImage As String = ""
+         Dim sCompoImageSource As ImageSource
+
+         'verifico presenza immagine e la aggiungo
+         If GetPrivateProfileString(S_FRAMECOMPO & index + nDeltaSecondPage, "Image", "", sCompoImage, m_MainWindow.GetIniFile()) <> 0 Then
+            Try
+               sCompoImageSource = ImageConverter.ConvertFromString(m_MainWindow.GetResourcesDir() & "\" & sCompoImage)
+               GetImage(index).Height = 65
+               GetImage(index).Width = 65
+               GetImage(index).Source = sCompoImageSource
+            Catch ex As Exception
+               EgtOutLog("Error loading image " & sCompoImage)
+               sCompoImage = String.Empty
+               GetImage(index).Height = 0
+               GetImage(index).Width = 0
+               CustomThickness.Right = 0
+               GetImage(index).Margin = CustomThickness
+            End Try
+         Else
+            'Se non c'è l'immagine azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+         'verifico presenza testo
+         If nCompoName > 0 Then
+            Dim sCompoName As String = EgtMsg(MSG_COMPONENTPAGEUC + nCompoName)
+            'verifico presenza immagine
+            If sCompoImage.Length > 0 Then
+               'se la lunghezza del testo è maggiore di 15 lo taglio
+               If sCompoName.Length > 15 Then
+                  sCompoName = sCompoName.Substring(0, 15)
+               End If
+               GetLabel(index).Text = sCompoName
+               'Se ci sono sia testo che immagine imposto un margine di 10
+               CustomThickness.Right = 10
+               GetImage(index).Margin = CustomThickness
+            Else
+               'se l'immagine non c'è e il testo è maggiore di 20 lo taglio
+               If sCompoName.Length > 20 Then
+                  sCompoName = sCompoName.Substring(0, 20)
+               End If
+               GetLabel(index).Text = sCompoName
+            End If
+         Else
+            'Se non c'è testo azzero la distanza tra testo e immagine
+            CustomThickness.Right = 0
+            GetImage(index).Margin = CustomThickness
+         End If
+
+      Next
+
+   End Sub
+
    ' Gestione bottone altri componenti
    Private Sub Compo9_Click(sender As Object, e As RoutedEventArgs) Handles Compo9.Click
       If m_bIsFirstPage Then
          m_bIsFirstPage = False
          LoadPage()
-         'Compo9.SetValue(Grid.ColumnProperty, 1)
-         'Compo9.SetValue(Grid.ColumnSpanProperty, 1)
-         'ImageCompo9.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NumericKeyboardArrow.png", UriKind.Relative))
-         'ImageCompo9.Visibility = Windows.Visibility.Visible
-         'LabelCompo9.Visibility = Windows.Visibility.Hidden
          Compo9.SetValue(Grid.ColumnProperty, 0)
          Compo9.SetValue(Grid.ColumnSpanProperty, 2)
          ImageCompo9.Visibility = Windows.Visibility.Hidden

DrawImport/SideAngleUc.xaml

@@ -5,7 +5,7 @@
    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
    mc:Ignorable="d" 
-   d:DesignHeight="597.1" d:DesignWidth="255.9">
+   d:DesignHeight="636.9" d:DesignWidth="255.9">
 
    <!-- Definizione della Grid Laterale -->
    <Grid Name="VariablesCompoGrid"  Grid.RowSpan="2">
@@ -28,7 +28,7 @@
          <RowDefinition Height="1*"/>
          <RowDefinition Height="1*"/>
          <RowDefinition Height="0.2*"/>
-         <RowDefinition Height="4*"/>
+         <RowDefinition Height="5*"/>
          <!--<RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>
          <RowDefinition Height="0.5*"/>-->
@@ -56,7 +56,7 @@
       <TextBlock Name="Entity1" Grid.Row="1" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A1" Grid.Column="1" Grid.Row="1" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A1TxBx" Grid.Column="2" Grid.Row="1" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A1TxBx" Grid.Column="2" Grid.Row="1" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H1TxBx" Grid.Column="3" Grid.Row="1" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -64,7 +64,7 @@
       <TextBlock Name="Entity2" Grid.Row="2" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A2" Grid.Column="1" Grid.Row="2" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A2TxBx" Grid.Column="2" Grid.Row="2" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A2TxBx" Grid.Column="2" Grid.Row="2" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H2TxBx" Grid.Column="3" Grid.Row="2" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -72,7 +72,7 @@
       <TextBlock Name="Entity3" Grid.Row="3" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A3" Grid.Column="1" Grid.Row="3" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A3TxBx" Grid.Column="2" Grid.Row="3" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A3TxBx" Grid.Column="2" Grid.Row="3" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H3TxBx" Grid.Column="3" Grid.Row="3" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -80,7 +80,7 @@
       <TextBlock Name="Entity4" Grid.Row="4" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A4" Grid.Column="1" Grid.Row="4" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A4TxBx" Grid.Column="2" Grid.Row="4" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A4TxBx" Grid.Column="2" Grid.Row="4" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H4TxBx" Grid.Column="3" Grid.Row="4" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -88,7 +88,7 @@
       <TextBlock Name="Entity5" Grid.Row="5" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A5" Grid.Column="1" Grid.Row="5" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A5TxBx" Grid.Column="2" Grid.Row="5" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A5TxBx" Grid.Column="2" Grid.Row="5" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H5TxBx" Grid.Column="3" Grid.Row="5" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -96,7 +96,7 @@
       <TextBlock Name="Entity6" Grid.Row="6" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A6" Grid.Column="1" Grid.Row="6" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A6TxBx" Grid.Column="2" Grid.Row="6" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A6TxBx" Grid.Column="2" Grid.Row="6" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H6TxBx" Grid.Column="3" Grid.Row="6" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -104,7 +104,7 @@
       <TextBlock Name="Entity7" Grid.Row="7" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A7" Grid.Column="1" Grid.Row="7" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A7TxBx" Grid.Column="2" Grid.Row="7" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A7TxBx" Grid.Column="2" Grid.Row="7" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H7TxBx" Grid.Column="3" Grid.Row="7" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -112,7 +112,7 @@
       <TextBlock Name="Entity8" Grid.Row="8" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A8" Grid.Column="1" Grid.Row="8" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A8TxBx" Grid.Column="2" Grid.Row="8" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A8TxBx" Grid.Column="2" Grid.Row="8" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H8TxBx" Grid.Column="3" Grid.Row="8" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -120,7 +120,7 @@
       <TextBlock Name="Entity9" Grid.Row="9" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A9" Grid.Column="1" Grid.Row="9" Height="30" Width="40" HorizontalAlignment="Right"
          Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A9TxBx" Grid.Column="2" Grid.Row="9" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A9TxBx" Grid.Column="2" Grid.Row="9" Width="60" IsLength="False"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H9TxBx" Grid.Column="3" Grid.Row="9" Width="60"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
@@ -128,14 +128,14 @@
       <TextBlock Name="Entity10" Grid.Row="10" Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
       <CheckBox Name="A10" Grid.Column="1" Grid.Row="10" Height="30" Width="40" HorizontalAlignment="Right"
           Margin="-20,0,0,0"/>
-      <EgtWPFLib:EgtTextBox Name="A10TxBx" Grid.Column="2" Grid.Row="10" Width="60"
+      <EgtWPFLib:EgtTextBox Name="A10TxBx" Grid.Column="2" Grid.Row="10" Width="60" IsLength="False"
                             Margin="0,0,0,-2"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
       <EgtWPFLib:EgtTextBox Name="H10TxBx" Grid.Column="3" Grid.Row="10" Width="60"
                             Margin="0,0,0,-2"
                             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-      <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4">
+      <Grid Grid.Column="0" Grid.Row="12" Grid.ColumnSpan="4" >
           <Grid.ColumnDefinitions>
                 <ColumnDefinition Width="1.5*"/>
                 <ColumnDefinition Width="0.3*"/>
@@ -143,10 +143,11 @@
                 <ColumnDefinition Width="0.6*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
-                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
+                <RowDefinition Height="0.9*"/>
             </Grid.RowDefinitions>
 
             <TextBlock Name="Parameter1TxBl" Grid.Row="0" Grid.ColumnSpan="2"
@@ -168,7 +169,7 @@
             <UniformGrid Rows="1" Grid.Column="2" Grid.Row="1" Grid.ColumnSpan="2" Width="90" >
                 <EgtWPFLib:EgtTextBox Name="Parameter2aTxBx" 
                                       Grid.Column="2" Grid.Row="12"
-                                      Width="40" Height="30"
+                                      Width="40" Height="30" IsLength="False"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
                 <EgtWPFLib:EgtTextBox Name="Parameter2bTxBx" 
                                       Grid.Column="3" Grid.Row="12" 
@@ -196,6 +197,16 @@
                                   Margin="0,0,0,-2"
                                   Width="85" Height="30"
                Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+            <TextBlock Name="Parameter5TxBl" Grid.Row="4" Grid.ColumnSpan="2"
+               Text="Angolo"
+               Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"
+               FontSize="{DynamicResource FontSize_LowerCaseCharacter}"/>
+            <EgtWPFLib:EgtTextBox Name="Parameter5TxBx" 
+                                  Grid.Column="2" Grid.ColumnSpan="2" Grid.Row="4" 
+                                  Margin="0,0,0,-2"
+                                  Width="85" Height="30" IsLength="False"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+
         </Grid>
 
         <!--<TextBlock Name="Parameter1TxBl" Grid.Row="11" Text="Offset"

DrawImport/SideAngleUc.xaml.vb

@@ -36,6 +36,7 @@ Public Class SideAngleUC
    Friend m_dDripDepth As Double = 10
    Friend m_dEngraveDepth2 As Double = 15
    Friend m_dDripShort As Double = 0
+   Friend m_dEngraveAngle As Double = 0
 
    Private CurrEntityDrip As DripEntity
 
@@ -106,6 +107,9 @@ Public Class SideAngleUC
          ' Accorciamento
          Parameter4TxBl.Visibility = Windows.Visibility.Hidden
          Parameter4TxBx.Visibility = Windows.Visibility.Hidden
+         ' Angolo 
+         Parameter5TxBl.Visibility = Windows.Visibility.Hidden
+         Parameter5TxBx.Visibility = Windows.Visibility.Hidden
       Else
          ' se aggiungo gli ENGRAVE e i DRIP
 
@@ -117,10 +121,12 @@ Public Class SideAngleUC
             GetAngleTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
             GetHeelTxBxFromIndex(Index).Visibility = Windows.Visibility.Visible
          Next
+
          ' Offset
          Parameter1TxBl.Visibility = Windows.Visibility.Visible
          Parameter1TxBx.Visibility = Windows.Visibility.Visible
          Parameter2TxBl.Visibility = Windows.Visibility.Visible
+
          ' Offset2
          If m_Mode <> ModeOpt.ENGRAVE Then
             Parameter2TxBx.Visibility = Windows.Visibility.Visible
@@ -131,6 +137,7 @@ Public Class SideAngleUC
             Parameter2aTxBx.Visibility = Windows.Visibility.Visible
             Parameter2bTxBx.Visibility = Windows.Visibility.Visible
          End If
+
          ' Affondamento
          Parameter3TxBl.Visibility = Windows.Visibility.Visible
          Parameter3TxBx.Visibility = Windows.Visibility.Visible
@@ -146,6 +153,17 @@ Public Class SideAngleUC
             Parameter4TxBx.Visibility = Windows.Visibility.Hidden
          End If
 
+         ' Angolo
+         If m_Mode = ModeOpt.ENGRAVE Then
+            ' modifico il nome del messaggio 
+            Parameter5TxBl.Text = EgtMsg(MSG_IMPORTPAGEUC + 9)            ' Angolo
+            Parameter5TxBl.Visibility = Windows.Visibility.Visible
+            Parameter5TxBx.Visibility = Windows.Visibility.Visible
+         Else
+            Parameter5TxBl.Visibility = Windows.Visibility.Hidden
+            Parameter5TxBx.Visibility = Windows.Visibility.Hidden
+         End If
+
       End If
 
       ' Gestisco Checkbox e nomi in base al numero di lati inclinabili
@@ -167,11 +185,13 @@ Public Class SideAngleUC
          m_dDripOffset2 = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEOFFSET2, 0, m_MainWindow.GetIniFile())
          m_dDripDepth = GetPrivateProfileDouble( S_SIDES, K_ENGRAVEDEPTH, 10, m_MainWindow.GetIniFile())
          m_dEngraveDepth2 = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0, m_MainWindow.GetIniFile())
-         Parameter1TxBx.Text = LenToString( m_dDripOffset, 3)
+         m_dEngraveAngle = GetPrivateProfileDouble(S_SIDES, K_ENGRAVEANGLE, 0, m_MainWindow.GetIniFile())
+         Parameter1TxBx.Text = LenToString(m_dDripOffset, 3)
          Parameter2aTxBx.Text = m_nEngrNbr2.ToString()
          Parameter2bTxBx.Text = LenToString( m_dDripOffset2, 3)
          Parameter3TxBx.Text = LenToString( m_dDripDepth, 3)
          Parameter4TxBx.Text = LenToString(m_dEngraveDepth2, 3)
+         Parameter5TxBx.Text = DoubleToString(m_dEngraveAngle, 3)
       End If
 
       ' Aggiorno visualizzazione
@@ -501,6 +521,7 @@ Public Class SideAngleUC
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3), m_MainWindow.GetIniFile())
          WritePrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3), m_MainWindow.GetIniFile())
          'WritePrivateProfileString( S_SIDES, K_ENGRAVESHORT, DoubleToString( m_dDripShort, 3), m_MainWindow.GetIniFile())
+         WritePrivateProfileString(S_SIDES, K_ENGRAVEANGLE, LenToString(m_dEngraveAngle, 3), m_MainWindow.GetIniFile())
       End If
 
       EgtDraw()
@@ -862,6 +883,8 @@ Public Class SideAngleUC
          End While
       End If
 
+      Dim ListEngraveSideAng As New List(Of Integer)
+
       If m_Mode = ModeOpt.DRIP Then
          ' Esplodo nelle curve componenti
          nCrvId = EgtGetFirstInGroup(DripLayer)
@@ -881,15 +904,70 @@ Public Class SideAngleUC
          End While
       Else
          ' Assegno colore e attributi
+         Dim nInd As Integer = 0
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
             EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
             'EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
             EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
+            If nInd = 0 Then
+               ' solo se m_dEngraveAngle > 0
+               If Math.Abs(m_dEngraveAngle) > EPS_ANG_SMALL Then
+                  ' salvo l'Id della curva che deve essere manipolato separatamente
+                  ListEngraveSideAng.Add(nCrvId)
+               Else
+                  EgtRemoveInfo(nCrvId, INFO_SIDE_ANGLE)
+                  EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+               End If
+            Else
+               If nInd = m_nEngrNbr2 Then
+                  nInd = -1
+               End If
+               EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+            End If
+            nInd = nInd + 1
+            If nInd > m_nEngrNbr2 Then nInd = 0
             nCrvId = EgtGetNext(nCrvId)
          End While
       End If
+      SplitJointedSideEngrave(ListEngraveSideAng)
+   End Sub
 
+   Private Sub SplitJointedSideEngrave(ListEngraveSideAngId As List(Of Integer))
+      For Each nCrvId As Integer In ListEngraveSideAngId
+         ' eventualmente separo il taglio inclinato
+         Dim dUs, dUe As Double
+         EgtCurveDomain(nCrvId, dUs, dUe)
+         Dim dU As Double = dUs
+         While dU < dUe ' + EPS_ZERO
+            Dim ptCurr As Point3d
+            EgtAtParamPoint(nCrvId, dU + 1, nCrvId, ptCurr)
+            ' separa la curva in questo punto
+            Dim nNewCurvId As Integer = GDB_ID.NULL
+            If dUe > 1 Then
+               nNewCurvId = EgtSplitCurveAtPoint(nCrvId, ptCurr, GDB_RT.LOC)
+            Else
+               nNewCurvId = nCrvId
+            End If
+            EgtSetColor(nCrvId, COL_MCH_ONENGRAVE_ANG())
+            EgtSetInfo(nCrvId, INFO_SIDE_ANGLE, m_dEngraveAngle)
+            ' recupero il vettore di estrusione della curva e la direzione della curva
+            Dim vtAux As Vector3d
+            EgtStartVector(nCrvId, vtAux)
+            Dim vtExtrusion As Vector3d
+            EgtCurveExtrusion(nCrvId, vtExtrusion)
+            ' ruoto il vetottore nella nuova direzione
+            vtExtrusion.Rotate(vtAux, -m_dEngraveAngle)
+            ' assegno il vettore di estrusione nella nuova direzione indicata (segno negativo perchè dentro il pezzo)
+            EgtModifyCurveExtrusion(nCrvId, vtExtrusion)
+            Dim ExtendFactor As Double = New Vector3d(0, 0, 1) * vtExtrusion
+            EgtModifyCurveThickness(nCrvId, -m_dDripDepth / ExtendFactor)
+            If dUe = 1 Then Exit While
+            nCrvId = nNewCurvId
+            ' aggiorno i valori del dominio della curva che rimane
+            EgtCurveDomain(nCrvId, dUs, dUe)
+         End While
+      Next
    End Sub
 
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
@@ -1336,6 +1414,15 @@ Public Class SideAngleUC
       End If
    End Sub
 
+   Private Sub Parameter5TxBx_EgtClosed(sender As Object, e As EventArgs) Handles Parameter5TxBx.EgtClosed
+      If m_Mode = ModeOpt.ENGRAVE Then
+         ' Recupero il valore
+         StringToDouble(Parameter5TxBx.Text, m_dEngraveAngle)
+         ' Creo le geometrie dei gocciolatoi
+         RefreshSideAngleText()
+      End If
+   End Sub
+
    Friend Sub ReLoadSideAnglePage()
       SideAngleUC_Loaded(Me, New RoutedEventArgs)
    End Sub

Frames/FrameCutPageUC.xaml

@@ -7,124 +7,132 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280">
 
-   <!-- Definizione della FrameCutPage -->
-   <Grid Name="FrameCutPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
-      
-      <!-- Definizione della Grid superiore -->
-      <Grid Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
-         </Grid.ColumnDefinitions>
-         
-         <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
-            <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
-         <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
-            <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </ToggleButton>
-
-      </Grid>
-
-      <Grid Name="LeftGrid" Grid.Row="1">
-         <Grid.RowDefinitions>
+    <!-- Definizione della FrameCutPage -->
+    <Grid Name="FrameCutPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
             <RowDefinition Height="1*"/>
-            <RowDefinition Height="7*"/>
-         </Grid.RowDefinitions>
-      
-      <Grid Grid.Row="1">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="0.6*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.8*"/>
-            <RowDefinition Height="2.5*"/>
-         </Grid.RowDefinitions>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
-               Width="200" MaxDropDownHeight="300">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+        <!-- Definizione della Grid superiore -->
+        <Grid Grid.Column="1" Grid.Row="0" >
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="4*"/>
+            </Grid.ColumnDefinitions>
 
-         <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="SelSectionBtn" 
-                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-                <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+            <Button Name="PhotoBtn" Grid.Column="0" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource PhotoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
             </Button>
-             
-            <Grid>
-               <Button Name="SelGuideBtn" 
+            <Button Name="RawPartBtn" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                <Image Source="{DynamicResource RawPartImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+            <ToggleButton Name="MachiningBtn" Grid.Column="4" Style="{DynamicResource OmagCut_RightGrayYellowIconToggleButton}">
+                <Image Source="{DynamicResource FrameMachiningImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </ToggleButton>
+
+        </Grid>
+
+        <Grid Name="LeftGrid" Grid.Row="1">
+            <Grid.RowDefinitions>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="7*"/>
+            </Grid.RowDefinitions>
+
+            <Grid Grid.Row="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.6*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="0.8*"/>
+                    <RowDefinition Height="1.7*"/>
+                </Grid.RowDefinitions>
+
+                <ComboBox Name="AlongAxCmBx" Grid.Row="0" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}" 
+               Width="200" MaxDropDownHeight="300">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <UniformGrid Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="SelSectionBtn" 
+                    Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                        <Image Source="{DynamicResource Sezione-corniceImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>
+
+                    <Grid>
+                        <Button Name="SelGuideBtn" 
                        Style="{DynamicResource OmagCut_YellowTextButton}"/>
-               <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
-                  <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+                        <UniformGrid Name="ArcGrid" Grid.Column="0" Grid.Row="1" Grid.ColumnSpan="3" Columns="2" >
+                            <TextBlock Name="ArcRadTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                            <EgtWPFLib:EgtTextBox Name="ArcRadTxBx" Grid.Column="2" Grid.Row="2" Width="50"
                              Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-                  <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                            <TextBlock Name="ArcAngTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                            <EgtWPFLib:EgtTextBox Name="ArcAngTxBx" Grid.Column="2" Grid.Row="3" Width="50"
                              Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-               </UniformGrid>
-            </Grid>  
-         </UniformGrid>
+                        </UniformGrid>
+                    </Grid>
+                </UniformGrid>
 
-         <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
+                <TextBlock Name="OffsZTxBl"  Grid.Row="2" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsZTxBx" Grid.Column="2" Grid.Row="2" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
+                <TextBlock Name="OffsXyTxBl"  Grid.Row="3" Grid.ColumnSpan="2"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsXyTxBx" Grid.Column="2" Grid.Row="3" Width="50"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
+                <TextBlock Name="OffsYyTxBl"  Grid.Row="4" Grid.ColumnSpan="2"
             Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
+                <EgtWPFLib:EgtTextBox Name="OffsYyTxBx" Grid.Column="2" Grid.Row="4" Width="50"
             Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
-            <Button Name="MirrorPartBtn" 
+                <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="MirrorPartBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource SpecchiaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-            </Button>
-            <Button Name="RemovePartBtn" 
+                    </Button>
+                    <Button Name="RemovePartBtn" 
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
                         <Image Source="{DynamicResource Rimuovi_eliminaImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
-            </Button>
-         </UniformGrid>
+                    </Button>
+                </UniformGrid>
 
-         <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
+                <UniformGrid Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="2" >
+                    <Button Name="CompoBtn" 
+                    Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}">
+                        <Image Source="{DynamicResource DrawImg}" Style="{DynamicResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                </UniformGrid>
+
+                <!--<TextBlock Name="SawRoughingTxBl" Grid.Row="4" Grid.ColumnSpan="3"
             Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
 
          <ComboBox Name="SawRoughingCmBx" Grid.Row="5" Grid.ColumnSpan="3" Style="{StaticResource OmagCut_ComboBox}"
@@ -182,10 +190,10 @@
             </ComboBox.ItemTemplate>
          </ComboBox>-->
 
-      </Grid>
-         
-      </Grid>
+            </Grid>
 
-   </Grid>
+        </Grid>
+
+    </Grid>
 
 </UserControl>

Frames/FrameCutPageUC.xaml.vb

@@ -81,6 +81,8 @@ Public Class FrameCutPageUC
       m_ProjectMgr.CSVBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.VeinMatchingBtn.Visibility = Windows.Visibility.Hidden
       m_ProjectMgr.RegisterBtn.Visibility = Windows.Visibility.Hidden
+      ' Visualizzo il bottone per l'importazione dei compo frame
+      CompoBtn.Visibility = If(GetPrivateProfileInt(S_FRAMECOMPO, K_CMP_COUNT, 0, m_MainWindow.GetIniFile()) > 0, Visibility.Visible, Visibility.Hidden)
       ' Recupero dimensioni e kerf del grezzo
       m_nRawId = EgtGetFirstRawPart()
       GetRawBox(m_RawBox)
@@ -436,6 +438,16 @@ Public Class FrameCutPageUC
       End If
    End Sub
 
+   Private Sub CompoBtn_Click(sender As Object, e As RoutedEventArgs) Handles CompoBtn.Click
+      m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
+      m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
+      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
+      m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
+   End Sub
+
    Friend Function CreateFrame(nPartId As Integer) As Boolean
       If Not MyCreateFrame( nPartId) Then
          EgtErase( nPartId)

Machine/AlarmsPageUC.xaml.vb

@@ -29,7 +29,7 @@ Public Class AlarmsPageUC
 
    Private Sub AlarmsPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
 
-      'Assegno liste a combobox
+      ' Assegno liste a combobox
       CurrSawCmBx.ItemsSource = m_SawList
       CurrDrillCmBx.ItemsSource = m_DrillList
       CurrMillCmBx.ItemsSource = m_MillList
@@ -37,14 +37,24 @@ Public Class AlarmsPageUC
       CurrWJetCmBx.ItemsSource = m_WaterJetList
       AuxiliaryToolCmBx.ItemsSource = m_AuxToolTypeList
 
+      ' Variabile che accorcia il riferimento alla macchina corrente
+      m_CurrentMachine = m_MainWindow.m_CurrentMachine
+
       ' Assegno lista ad elenco materiali
-      MaterialsLstBx.ItemsSource = m_MainWindow.m_CurrentMachine.Materials
+      MaterialsLstBx.ItemsSource = m_CurrentMachine.Materials
 
       ' Se non è impostato il controllo numerico, nascondo il bottone di tastatura lama
       If GetPrivateProfileInt(S_NUMERICALCONTROL, K_TYPE, 0, m_MainWindow.GetMachIniFile()) = 0 Then
          SawProbingBtn.Visibility = Windows.Visibility.Hidden
       End If
 
+      ' Se esiste un file lua valido allora mostro il pulsante per l'esecuzione dello script
+      If Not String.IsNullOrEmpty(GetExecLuaFile()) And
+         ExecLuaBtn.Visibility = Visibility.Visible Then
+      Else
+         ExecLuaBtn.Visibility = Visibility.Hidden
+      End If
+
       ' Imposto i messaggi letti dal file dei messaggi
       CurrSawTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 1)
       AuxiliaryToolTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 2)
@@ -81,7 +91,16 @@ Public Class AlarmsPageUC
       TmDepthTxBl.Text = EgtMsg( 91063)                                  ' Profondità
       TmWidthTxBl.Text = EgtMsg( 91064)                                  ' Larghezza
       WJsParamGpBx.Header = EgtMsg( 91058)                               ' Parametri waterjet
-      WjIntCutsTxBl.Text = EgtMsg( 90930)                                ' Sempre sugli interni
+      WjIntCutsTxBl.Text = EgtMsg(90930)                                 ' Sempre sugli interni
+      '-- INIZIO -- nuovi parametri per preforo lavello
+      HolesDiameterWJTxBl.Text = "Diameter"
+      HolesOffsetWJTxBl.Text = "Offset"
+      MinRadiusWJTxBl.Text = "Min Radius"
+      OneHoleInCornerWJTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 26)
+      '-- INIZIO -- nuovi parametro Rettifica tagli sottosquadra WJ
+      REctificationWJParamGpBx.Header = "Rectification"
+      EnableRectificationTxBl.Text = "Enable (on subsquare angle)"
+      '--  FINE  -- nuovi parametro Rettifica tagli sottosquadra WJ
       NestingParamGpBx.Header = EgtMsg(MSG_ALARMSPAGEUC + 31)            ' Nesting
       AlignTxBl.Text = EgtMsg(90932)                                     ' Allineato
       GhigliottinaTxBl.Text = EgtMsg(91066)                              ' Ghigliottina
@@ -116,8 +135,6 @@ Public Class AlarmsPageUC
    Private Sub AlarmsPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
 
       If m_bFirst Then
-         ' Variabile che accorcia il riferimento alla macchina corrente
-         m_CurrentMachine = m_MainWindow.m_CurrentMachine
 
          ' in assenza dell'uscita H1 nascondo i parametri lama
          If EgtGetHeadId("H1") = GDB_ID.NULL Then
@@ -161,6 +178,7 @@ Public Class AlarmsPageUC
          ' Se non previsti tagli waterjet, disabilito relativo box
          If Not m_CurrentMachine.bWaterJetting Then
             WjsParamGpBx.Visibility = Visibility.Hidden
+            RectificationWJParamGpBx.Visibility = Visibility.Hidden
          End If
 
          ' Abilitazione box per contorni grezzo da foto
@@ -188,8 +206,8 @@ Public Class AlarmsPageUC
          m_bFirst = False
       End If
 
-         ' Aggiorno lista delle lame per pagina macchina in cui scegliere quella corrente
-         CreateToolList(MCH_TF.SAWBLADE, m_SawList)
+      ' Aggiorno lista delle lame per pagina macchina in cui scegliere quella corrente
+      CreateToolList(MCH_TF.SAWBLADE, m_SawList)
       ' Seleziono lama corrente
       CurrSawCmBx.SelectedItem = m_CurrentMachine.sCurrSaw
 
@@ -325,12 +343,24 @@ Public Class AlarmsPageUC
       EgtMdbSave()
       ' Leggo lavorazione angoli con fresa
       CornerCutsChBx.IsChecked =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
       ' Leggo lavorazione interni con fresa
       InternalCutsChBx.IsChecked =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
       WjIntCutsChBx.IsChecked =
-             (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, m_MainWindow.GetMachIniFile()) <> 0)
+      ' Lavorazione preforo lavello con WaterJet
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_HOLES_DIAMITERWJ, 0, m_MainWindow.GetMachIniFile())
+      HolesDiameterWJTxBx.Text = LenToString(dVal, 2)
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_HOLES_OFFSETWJ, 0, m_MainWindow.GetMachIniFile())
+      HolesOffsetWJTxBx.Text = LenToString(dVal, 2)
+      dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MIN_RADIUSWJ, 0, m_MainWindow.GetMachIniFile())
+      MinRadiusWJTxBx.Text = LenToString(dVal, 2)
+      OneHoleInCornerWJChBx.IsChecked =
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, 1, m_MainWindow.GetMachIniFile()) <> 0)
+      ' leggo se attiva la rettifica degli angoli per WaterJet
+      EnableRectificationChBx.IsChecked =
+         (GetPrivateProfileInt(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, 0, m_MainWindow.GetMachIniFile()) <> 0)
       ' Leggo accorciamento angoli con fresa
       dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, m_MainWindow.GetMachIniFile())
       ShortTxBx.Text = LenToString(dVal, 2)
@@ -343,7 +373,7 @@ Public Class AlarmsPageUC
       dVal = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_ENGRAVING_WIDTH, 0, m_MainWindow.GetMachIniFile())
       TmWidthTxBx.Text = LenToString(dVal, 2)
       ' Flag per movimento in home alla fine dei tagli diretti
-      FinalHomeChBx.IsChecked = m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome
+      FinalHomeChBx.IsChecked = m_CurrentMachine.bDirectCutsFinalHome
       ' Leggo tagli ridotti per interferenza in nesting
       CompleteCutsChBx.IsChecked =
              (GetPrivateProfileInt(S_MACH_NEST, K_MACH_REDUCEDCUT, 0, m_MainWindow.GetMachIniFile()) = 0)
@@ -365,7 +395,7 @@ Public Class AlarmsPageUC
          AdditionalTableTxBl.Text = EgtMsg(MSG_ALARMSPAGEUC + 36) & " " & GetCurrentTable().ToString()
       End If
       ' Leggo altezza sovratavola
-      dVal = m_MainWindow.m_CurrentMachine.dAdditionalTable
+      dVal = m_CurrentMachine.dAdditionalTable
       AdditionalTableTxBx.Text = LenToString(dVal, 2)
       ' Leggo soglia e tolleranza per contorno grezzo da foto
       ThresholdTxBx.Text = m_MainWindow.m_Camera.Threshold.ToString()
@@ -383,7 +413,7 @@ Public Class AlarmsPageUC
       If nWashing = -1 Then
          WashingGpBx.Visibility = Visibility.Hidden
       Else
-         WashingChBx.IsChecked = ( nWashing <> 0)
+         WashingChBx.IsChecked = (nWashing <> 0)
       End If
       ' Leggo parametri per variazione feed in tagli
       CfrLenTxBx.Text = LenToString(m_CurrentMachine.dFsevLength, 3)
@@ -439,7 +469,7 @@ Public Class AlarmsPageUC
          CurrWaterJettingTxBx.Text = m_CurrentMachine.sCurrWaterJetting
          CurrWaterJettingTxBl.Visibility = Windows.Visibility.Visible
          CurrWaterJettingTxBx.Visibility = Windows.Visibility.Visible
-         If m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+         If m_CurrentMachine.bFromDBWaterJet Then
             CurrWaterJettingTxBx.SetValue(Grid.ColumnSpanProperty, 1)
             CurrWaterJettingTxBx.SetValue(MarginProperty, New Thickness(CurrWaterJettingTxBx.Margin.Left,
                                                                         CurrWaterJettingTxBx.Margin.Top,
@@ -578,6 +608,33 @@ Public Class AlarmsPageUC
          String.Compare(sMchTool, m_CurrentMachine.sCurrSaw, True) <> 0 Then
          m_CurrentMachine.sCurrSawing = String.Empty
       End If
+
+      'Dim sVal As String = String.Empty
+      'Dim dVal As Double = 0
+      'If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSawing, false) Then
+      '   StringToDouble(sVal, dVal)
+      '   m_CurrentMachine.SetFsevLength(dVal)
+      'End If
+      'If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSawing, false) Then
+      '   StringToDouble(sVal, dVal)
+      '   m_CurrentMachine.SetFsevPerc(dVal)
+      'End If
+
+      Dim sVal As String = String.Empty
+      Dim dVal As Double = 0
+      If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, dVal)
+         m_CurrentMachine.SetFsevLength(dVal)
+      End If
+      If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, dVal)
+         m_CurrentMachine.SetFsevPerc(dVal)
+      End If
+
+      ' Leggo parametri per variazione feed in tagli aggiornati in funzione della lama
+      CfrLenTxBx.Text = LenToString(m_CurrentMachine.dFsevLength, 3)
+      CfrPercTxBx.Text = DoubleToString(m_CurrentMachine.dFsevPerc, 0)
+
       ' Aggiorno utensili per lavoro in corso
       m_MainWindow.m_WorkInProgressPageUC.UpdateTools()
       ' aggiorno la lista delle lavorazioni
@@ -893,6 +950,44 @@ Public Class AlarmsPageUC
       End If
    End Sub
 
+   ' -- INIZIO -- nuovi parametri per prefori WaterJet
+   Private Sub HolesDiameterWJTxBx_Click(sender As Object, e As EventArgs) Handles HolesDiameterWJTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(HolesDiameterWJTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_HOLES_DIAMITERWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub HolesOffsetWJTxBx_Click(sender As Object, e As EventArgs) Handles HolesOffsetWJTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(HolesOffsetWJTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_HOLES_OFFSETWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub MinRadiusWJTxBx_Click(sender As Object, e As EventArgs) Handles MinRadiusWJTxBx.EgtClosed
+      Dim dVal As Double = 0
+      StringToLen(MinRadiusWJTxBx.Text, dVal)
+      WritePrivateProfileString(S_MACH_NEST, K_MIN_RADIUSWJ, DoubleToString(dVal, 2), m_MainWindow.GetMachIniFile())
+   End Sub
+
+   Private Sub OneHoleInCornerWJChBx_Click(sender As Object, e As EventArgs) Handles OneHoleInCornerWJChBx.Click
+      If OneHoleInCornerWJChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, "1", m_MainWindow.GetMachIniFile())
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_DRILLINGWJ_ON_CORNERS, "0", m_MainWindow.GetMachIniFile())
+      End If
+   End Sub
+   ' --   FINE   -- nuovi parametri per prefori WaterJet
+
+   ' -- INIZIO -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+   Private Sub EnableRectificationChBx_Click(sender As Object, e As EventArgs) Handles EnableRectificationChBx.Click
+      If EnableRectificationChBx.IsChecked() Then
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "1", m_MainWindow.GetMachIniFile)
+      Else
+         WritePrivateProfileString(S_MACH_NEST, K_MACH_RECTIFICATION_ON_SUBSQUARE, "0", m_MainWindow.GetMachIniFile)
+      End If
+   End Sub
+   ' --   FINE   -- nuovi parametri per Rettifica angoli in sottosquadra WaterJet
+
    Private Sub TmEnableChBx_Click(sender As Object, e As RoutedEventArgs) Handles TmEnableChBx.Click
       If TmEnableChBx.IsChecked() Then
          WritePrivateProfileString(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, "1", m_MainWindow.GetMachIniFile())
@@ -915,9 +1010,9 @@ Public Class AlarmsPageUC
 
    Private Sub FinalHomeChBx_Click(sender As Object, e As RoutedEventArgs) Handles FinalHomeChBx.Click
       If FinalHomeChBx.IsChecked() Then
-         m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome = True
+         m_CurrentMachine.bDirectCutsFinalHome = True
       Else
-         m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome = False
+         m_CurrentMachine.bDirectCutsFinalHome = False
       End If
    End Sub
 
@@ -959,7 +1054,7 @@ Public Class AlarmsPageUC
    Private Sub AdditionalTableTxBx_EgtClosed(sender As Object, e As EventArgs) Handles AdditionalTableTxBx.EgtClosed
       Dim dVal As Double = 0
       StringToLen(AdditionalTableTxBx.Text, dVal)
-      m_MainWindow.m_CurrentMachine.dAdditionalTable = dVal
+      m_CurrentMachine.dAdditionalTable = dVal
    End Sub
 
    Private Sub NewMatBtn_Click(sender As Object, e As RoutedEventArgs) Handles NewMatBtn.Click
@@ -1083,9 +1178,13 @@ Public Class AlarmsPageUC
          Case 3
             Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(0)
             EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+         Case 4
+            ' FANUC - Manual:7, Edit:1
+            Dim nResult As Short = m_CN.DGeneralFunctions_WriteCncMode(7)
+            EgtOutLog("Impostata modalità manuale: esito " & nResult.ToString)
       End Select
       ' Recupero file LUA
-      EgtLuaExecFile(m_MainWindow.m_CurrentMachine.sMachDir() & "\DirectCmd\SawProbing.lua")
+      EgtLuaExecFile(m_CurrentMachine.sMachDir() & "\DirectCmd\SawProbing.lua")
       ' Recupero utensile da tastare
       Dim ToolForProbing As ToolPos = ChooseToolForProbing()
       If IsNothing(ToolForProbing) OrElse String.IsNullOrWhiteSpace(ToolForProbing.m_ToolName) Then Return
@@ -1105,6 +1204,12 @@ Public Class AlarmsPageUC
       EgtLuaSetGlobNumVar("CMD.THICK", dToolThick * 1000)
       EgtTdbGetCurrToolParam(MCH_TP.LEN, dToolLen)
       EgtLuaSetGlobNumVar("CMD.LENGTH", dToolLen * 1000)
+      ' Nuova varibile per gestione tastatura utensili Frankfurt (Polishing)
+      Dim nType As Integer
+      EgtTdbGetCurrToolParam(MCH_TP.TYPE, nType)
+      If m_CurrentMachine.bPolishingWheel AndAlso nType = MCH_TY.MILL_POLISHING Then
+         EgtLuaSetGlobStringVar("CMD.POLISHING", "1")
+      End If
       EgtLuaSetGlobBoolVar("CMD.INCHES", m_MainWindow.m_CNCommunication.GetMachineInInches())
       EgtLuaCallFunction("CMD.CmdString")
       ' Leggo variabili
@@ -1124,7 +1229,7 @@ Public Class AlarmsPageUC
       ' Modifico stringa per inserire i newline
       CmdString = CmdString.Replace("<br/>", Environment.NewLine)
       ' Creo file...
-      Dim FilePath As String = m_MainWindow.GetCncDir() & "\SawProbing" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+      Dim FilePath As String = m_MainWindow.GetCncDir() & "\SawProbing" & m_CurrentMachine.sIsoFileExt
       ' ...e ci scrivo
       Dim Writer As New IO.StreamWriter(FilePath, False)
       Writer.Write(CmdString)
@@ -1148,6 +1253,11 @@ Public Class AlarmsPageUC
          Return
       End If
       m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      ' Se fanuc passo in modalità AUTO e attivo
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(0)
+         EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+      End If
       ' Aspetto e lo avvio
       System.Threading.Thread.Sleep(300)
       m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
@@ -1197,6 +1307,10 @@ Public Class AlarmsPageUC
          Dim bRead As Boolean = False
          Dim SawDiameterNameVar As String = String.Empty
          GetPrivateProfileString(S_MACH_PROBING, K_SAWDIAMETER, "", SawDiameterNameVar, m_MainWindow.GetMachIniFile())
+         ' Se utensile non lama, allora la variabile in cui leggo il dato potrebbe essere differente
+         If Not ToolForProbing.m_IsSaw Then
+            GetPrivateProfileString(S_MACH_PROBING, K_TOOLLENGTH, SawDiameterNameVar, SawDiameterNameVar, m_MainWindow.GetMachIniFile())
+         End If
          m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0
          For I As Integer = 0 To 20
             ' Devo rileggere la variabile ad ogni ciclo
@@ -1205,7 +1319,10 @@ Public Class AlarmsPageUC
             If m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
                bRead = True
                Dim dVal As Double = m_MainWindow.m_CNCommunication.m_CN.d_DReadELS_value
-               dVal = dVal / 1000
+               ' Se fanuc il dato è in mm (NON MICRON)
+               If m_MainWindow.m_CNCommunication.m_nNCType <> 4 Then
+                  dVal = dVal / 1000
+               End If
                MsgBoxStateInfo.LoadingPrBr_Value = 100
                ' Tastatura conclusa con successo
                Dim sOut As String = EgtMsg(MSG_DIRECTCUTPAGEUC + 43) & " : " & DoubleToString(dVal, 1)
@@ -1252,9 +1369,9 @@ Public Class AlarmsPageUC
    End Sub
 
    Private Function ChooseToolForProbing() As ToolPos
-      Select Case m_MainWindow.m_CurrentMachine.MountedToolConfig
+      Select Case m_CurrentMachine.MountedToolConfig
          Case CurrentMachine.MountedToolConfigs.SAW
-            Return New ToolPos(m_MainWindow.m_CurrentMachine.sCurrSaw, "T100", True)
+            Return New ToolPos(m_CurrentMachine.sCurrSaw, "T100", True)
          Case CurrentMachine.MountedToolConfigs.SAWANDAUXTOOL, CurrentMachine.MountedToolConfigs.MANUALTOOLCHANGER, CurrentMachine.MountedToolConfigs.TOOLCHANGER
             Dim ChooseTool As New ChooseToolWD(m_MainWindow)
             If ChooseTool.ShowDialog Then
@@ -1300,4 +1417,36 @@ Public Class AlarmsPageUC
 
    End Sub
 
+   Private Sub ExecLuaBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExecLuaBtn.Click
+      Dim sExecFile As String = GetExecLuaFile()
+      ' Eseguo file LUA e recupero risultato
+      Dim nErr As Integer = 999
+      EgtLuaExecFile(sExecFile)
+      EgtLuaGetGlobIntVar("ELS.ERR", nErr)
+      ' Reset lua
+      EgtLuaResetGlobVar("ELS")
+      ' Verifico condizioni di errore
+      If nErr Then
+         ' Errore...
+         EgtOutLog("Error executing file: " & sExecFile & ", ELS.ERR=" & nErr.ToString)
+         ' Error executing script
+         Dim MsgBoxError As New EgtMsgBox(m_MainWindow, "", EgtMsg(90259), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL)
+         Return
+      End If
+   End Sub
+
+   ' Recupero il percorso del file lua da eseguire
+   Private Function GetExecLuaFile() As String
+      Dim sFile As String = String.Empty
+      If GetPrivateProfileString(S_EXECLUA, K_FILESCRIPT_LUA, "", sFile, m_MainWindow.GetMachIniFile()) <> 0 Then
+         ' Sistemo nome file
+         sFile = sFile.Trim()
+         If Not sFile.EndsWith(".lua") Then sFile = sFile & ".lua"
+         ' Creo path
+         Dim sPath As String = m_CurrentMachine.sMachDir() & "\Scripts\" & sFile
+         If File.Exists(sPath) Then Return sPath
+      End If
+      Return String.Empty
+   End Function
+
 End Class

Machine/CurrentMachine.vb

@@ -77,6 +77,9 @@ Public Class CurrentMachine
    Private m_bPolishingWheel As Boolean = False
    Private m_bWaterJet As Boolean = False
 
+   ' Flag che indica se gesire l'inversione del taglio nei tagli singoli
+   Private m_bEnableInvetrt As Boolean = True
+
    ' Abilitazione DB WaterJet
    Private m_bFromDBWaterJet As Boolean = False
 
@@ -609,6 +612,18 @@ Public Class CurrentMachine
          If WritePrivateProfileString(S_MACH_MACH, K_CURRSAWING, value, sMachIniFile) Then
             m_sCurrSawing = value
             m_MainWindow.m_CurrentProjectPageUC.MachiningTxBx.Text = value
+            '' aggiorno il file ini della macchina con i valori correnti della lavorazione
+            'Dim sVal As String = String.Empty
+            'Dim dVal As Double = m_dFsevLength
+            'If GetUserNote("FsevLength", sVal, m_sCurrSawing, False) Then
+            '   StringToDouble(sVal, dVal)
+            '   SetFsevLength(dVal)
+            'End If
+            'dVal = m_dFsevPerc
+            'If GetUserNote("FsevPerc", sVal, m_sCurrSawing, False) Then
+            '   StringToDouble(sVal, m_dFsevPerc)
+            '   SetFsevPerc(dVal)
+            'End If
          End If
       End Set
    End Property
@@ -740,6 +755,12 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property bEnableInvert As Boolean
+      Get
+         Return m_bEnableInvetrt
+      End Get
+   End Property
+
    Friend Property dAdditionalTable As Double
       Get
          Select Case GetCurrentTable()
@@ -861,9 +882,18 @@ Public Class CurrentMachine
       Set(value As Double)
          If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVLEN, DoubleToString(value, 3), sMachIniFile) Then
             m_dFsevLength = value
+            ' salvo il dato nelle UserNote della lavorazione
+            'MdbSetCurrMachiningUserNote("FsevLength", m_dFsevLength.ToString, sCurrSawing, false)
+            ' salvo il dato nelle UserNote dell'utensile
+            TdbSetCurrToolUserNote("FsevLength", m_dFsevLength.ToString, sCurrSaw)
          End If
       End Set
    End Property
+   Friend Sub SetFsevLength(value As Double)
+      If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVLEN, DoubleToString(value, 3), sMachIniFile) Then
+         m_dFsevLength = value
+      End If
+   End Sub
 
    Friend Property dFsevPerc As Double
       Get
@@ -872,9 +902,18 @@ Public Class CurrentMachine
       Set(value As Double)
          If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVPERC, DoubleToString(value, 3), sMachIniFile) Then
             m_dFsevPerc = value
+            '' salvo il dato nelle UserNote della lavorazione
+            'MdbSetCurrMachiningUserNote("FsevPerc", m_dFsevPerc.ToString, sCurrSawing)
+            ' salvo il dato nelle UserNote dell'utensile
+            TdbSetCurrToolUserNote("FsevPerc", m_dFsevPerc.ToString, sCurrSaw)
          End If
       End Set
    End Property
+   Friend Sub SetFsevPerc(value As Double)
+      If WritePrivateProfileString(S_NEST, K_MACH_CUTFSEVPERC, DoubleToString(value, 3), sMachIniFile) Then
+         m_dFsevPerc = value
+      End If
+   End Sub
 
    Friend ReadOnly Property ToolChangerNbr As Integer
       Get
@@ -1170,6 +1209,8 @@ Public Class CurrentMachine
                         m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.ENABLE_WJ)
       ' possibilità di definire attacco speciale per materiali ceramici
       m_bSawingSpecialLeadIn = (GetPrivateProfileInt(S_MACHININGS, K_SAWINGSPECIALLEADIN, 0, sMachIniFile) > 0)
+      ' mantengo la direzione del taglio definita nel taglio diretto
+      m_bEnableInvetrt = (GetPrivateProfileInt(S_DIRECTCUTS, K_ENABLEINVERT, 1, sMachIniFile) <> 0)
 
       ' Leggo utensili correnti
       ' lama
@@ -1265,6 +1306,7 @@ Public Class CurrentMachine
 
       ' Leggo dati per feed ridotta all'inizio/fine dei tagli
       m_bFsevEnable = (GetPrivateProfileInt(S_NEST, K_MACH_CUTFSEVENABLE, 0, sMachIniFile) <> 0)
+      ' sposto la lettura nel DB delle lavorazioni della lama corrente!
       m_dFsevLength = GetPrivateProfileDouble(S_NEST, K_MACH_CUTFSEVLEN, 0, sMachIniFile)
       m_dFsevPerc = GetPrivateProfileDouble(S_NEST, K_MACH_CUTFSEVPERC, 0, sMachIniFile)
 
@@ -1320,6 +1362,29 @@ Public Class CurrentMachine
       m_nEnableBarCodeReader = GetPrivateProfileInt(S_MACH_BARCODEREADER, K_ENABLEBCR, 0, sMachIniFile)
    End Sub
 
+   ' Per il controllo FANUC al momento dell'inizializzazione del CN devono essere lette alcune variabili
+   Public Sub InitFANUC(CN_Generic As CN_generico)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nResetSendDelay = GetPrivateProfileInt(S_NCFANUC, K_RESETSENDDELAY, 1000, sMachIniFile)
+      ' Leggo ritardo tra reset e send per NUM
+      m_nThreadSleep = GetPrivateProfileInt(S_NCFANUC, K_THREADSLEEP, 150, sMachIniFile)
+      ' Leggo i dati strettamente correlati alla comunicazione NC-PC
+      Dim CN As CN_generico = CN_Generic
+      ' Leggo l'indirizzo in cui scrivere lo stato macchina
+      Dim dAddNcMode As String = CN.s_addr_set_nc_mode
+      GetPrivateProfileString(S_NCFANUC, K_SETNCMODE, CN.s_addr_set_nc_mode, CN.s_addr_set_nc_mode, sMachIniFile)
+      ' Leggo primo indirizzo libero delle variabili di tipo intero
+      CN.n_Base_addr_int_vars = GetPrivateProfileInt(S_NCFANUC, K_BASEADDRINT, CN.n_Base_addr_int_vars, sMachIniFile)
+      ' Leggo primo indirizzo libero delle variabili di tipo bit
+      CN.n_Base_addr_byte_for_bits_vars = GetPrivateProfileInt(S_NCFANUC, K_BASEADDRBIT, CN.n_Base_addr_byte_for_bits_vars, sMachIniFile)
+      ' Leggo numero di variabili di tipo intero
+      CN.n_num_var_int_to_read = CShort(GetPrivateProfileInt(S_NCFANUC, K_NUMVARINT, CInt(CN.n_num_var_int_to_read), sMachIniFile))
+      ' Leggo numero di varibili di tipo bit
+      CN.n_num_var_byte_for_bits_to_read = CShort(GetPrivateProfileInt(S_NCFANUC, K_NUMVARBIT, CInt(CN.n_num_var_byte_for_bits_to_read), sMachIniFile))
+      ' Leggo variabile abilitata alla gestione di FeedHold
+      GetPrivateProfileString(S_NCFANUC, K_SETNCMODE, CN.s_addr_feedhold, CN.s_addr_feedhold, sMachIniFile)
+   End Sub
+
    Public Sub LoadWJMaterial(Optional bIsStart As Boolean = False)
       Dim TempCurrMat As Material = CurrMat
       ' Svuoto l'attuale lista di materiali
@@ -1383,9 +1448,148 @@ Public Class CurrentMachine
             If bFound Then Exit For
          Next
       End If
-      Return dMaxThick
+      ' il valore resituito è già nell'unità corrente del programma -> converto il dato in mm
+      Dim dValmm As Double = 0
+      StringToLen(DoubleToString(dMaxThick, 3), dValmm)
+      Return dValmm
    End Function
 
+#Region "USERNOTE"
+
+   ' recupero le note UserNote associate alla LAVORAZIONE Machining
+   Friend Function MdbGetCurrMachiningUserNote(Machining As String) As String
+      Dim UserNotes As String = String.Empty
+      ' lavorazione corrente
+      Dim CurrMach As String = String.Empty
+      EgtMdbGetCurrMachiningParam(MCH_MP.NAME, CurrMach)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Machining) AndAlso EgtMdbSetCurrMachining(Machining) Then
+         ' leggo nel db corrente della lavorazione questa info
+         EgtMdbGetCurrMachiningParam(MCH_MP.USERNOTES, UserNotes)
+         ' reimposto lavorazione corrente
+         EgtMdbSetCurrMachining(CurrMach)
+      End If
+      Return UserNotes
+   End Function
+
+   ' recupero le note UserNote associate all'UTENSILE Tool
+   Friend Function TdbGetCurrToolUserNote(Tool As String) As String
+      Dim UserNotes As String = String.Empty
+      ' lavorazione corrente
+      Dim CurrTool As String = String.Empty
+      EgtTdbGetCurrToolParam(MCH_TP.NAME, CurrTool)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Tool) AndAlso EgtTdbSetCurrTool(Tool) Then
+         ' leggo nel db corrente della lavorazione questa info
+         EgtTdbGetCurrToolParam(MCH_TP.USERNOTES, UserNotes)
+         ' reimposto lavorazione corrente
+         EgtTdbSetCurrTool(CurrTool)
+      End If
+      Return UserNotes
+   End Function
+
+   ' imposta il nuovo valore in UserNote della LAVORAZIONE Machining
+   Friend Sub MdbSetCurrMachiningUserNote(sKeyUserNote As String, sValUserNote As String, Machining As String)
+      ' lavorazione corrente
+      Dim CurrMach As String = String.Empty
+      EgtMdbGetCurrMachiningParam(MCH_MP.NAME, CurrMach)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Machining) AndAlso EgtMdbSetCurrMachining(Machining) Then
+         Dim UserNotes As String = String.Empty
+         ' salvo nel db corrente della lavorazione questa info → devo gestire l'inserimento: sovrascrivo NON ESEGUE un APPEND delle info
+         EgtMdbSetCurrMachiningParam(MCH_MP.USERNOTES, AssembUserNote(sKeyUserNote, sValUserNote, Machining))
+         EgtMdbSaveCurrMachining()
+         EgtMdbSave()
+         ' reimposto lavorazione corrente
+         EgtMdbSetCurrMachining(CurrMach)
+      End If
+   End Sub
+
+   ' imposta il nuovo valore in UserNote dell'UTENSILE Tool
+   Friend Sub TdbSetCurrToolUserNote(sKeyUserNote As String, sValUserNote As String, Tool As String)
+      ' lavorazione corrente
+      Dim CurrTool As String = String.Empty
+      EgtTdbGetCurrToolParam(MCH_TP.NAME, CurrTool)
+      ' Imposto utensile lama corrente
+      If Not String.IsNullOrWhiteSpace(Tool) AndAlso EgtTdbSetCurrTool(Tool) Then
+         Dim UserNotes As String = String.Empty
+         ' salvo nel db corrente della lavorazione questa info → devo gestire l'inserimento: sovrascrivo NON ESEGUE un APPEND delle info
+         EgtTdbSetCurrToolParam(MCH_TP.USERNOTES, AssembUserNote(sKeyUserNote, sValUserNote, Tool))
+         EgtTdbSaveCurrTool()
+         EgtTdbSave()
+         ' reimposto lavorazione corrente
+         EgtTdbSetCurrTool(Tool)
+      End If
+   End Sub
+
+   ' separa la le note UserNote della LAVORAZIONE
+   Private Function SplitUserNoteMachinig(Machining As String) As String()
+      Dim sUserNotes As String = MdbGetCurrMachiningUserNote(Machining)
+      If String.IsNullOrEmpty(sUserNotes) Then Return Nothing
+      Dim sItems As String() = sUserNotes.Split(";"c)
+      Return sItems
+   End Function
+
+   ' separa la le note UserNote della LAVORAZIONE
+   Private Function SplitUserNoteTool(Tool As String) As String()
+      Dim sUserNotes As String = TdbGetCurrToolUserNote(Tool)
+      If String.IsNullOrEmpty(sUserNotes) Then Return Nothing
+      Dim sItems As String() = sUserNotes.Split(";"c)
+      Return sItems
+   End Function
+
+   ' recupera il valore della associato alla chiave per la lavorazione oppure utensile (bIsToolNote)
+   Friend Function GetUserNote(sKeyUserNote As String, ByRef sValUserNote As String, sName As String, Optional bIsToolNote As Boolean = True) As Boolean
+      Dim sUserNotesList As String() = Nothing
+      If bIsToolNote Then
+         sUserNotesList = SplitUserNoteTool(sName)
+      Else
+         sUserNotesList = SplitUserNoteMachinig(sName)
+      End If
+      If IsNothing(sUserNotesList) Then Return False
+      For Index As Integer = 0 To sUserNotesList.Count - 1
+         Dim sNote As String() = sUserNotesList(Index).Split("="c)
+         If sNote.Count = 2 AndAlso sNote(0).Trim = sKeyUserNote Then
+            sValUserNote = sNote(1).Trim
+         End If
+      Next
+      Return True
+   End Function
+
+   ' ricostruisce la stringa UserNote da salvare
+   Friend Function AssembUserNote(sKeyUserNote As String, sValUserNote As String, sName As String, Optional bIsToolNote As Boolean = True) As String
+      Dim sUserNotes As String = String.Empty
+      Dim sUserNotesList As String() = Nothing
+      If bIsToolNote Then
+         sUserNotesList = SplitUserNoteTool(sName)
+      Else
+         sUserNotesList = SplitUserNoteMachinig(sName)
+      End If
+      Dim bExists As Boolean = False
+      If Not IsNothing(sUserNotesList) Then
+         For Index As Integer = 0 To sUserNotesList.Count - 1
+            Dim sNote As String() = sUserNotesList(Index).Split("="c)
+            If sNote.Count = 2 AndAlso sNote(0).Trim = sKeyUserNote Then
+               sUserNotesList(Index) = sKeyUserNote & "=" & sValUserNote
+               bExists = True
+               Exit For
+            End If
+         Next
+         ' riassemblo la stringa
+         For Each Item As String In sUserNotesList
+            If Not String.IsNullOrWhiteSpace(Item) Then
+               sUserNotes &= Item & ";"
+            End If
+         Next
+      End If
+      If Not bExists Then
+         sUserNotes &= sKeyUserNote & "=" & sValUserNote & ";"
+      End If
+      Return sUserNotes
+   End Function
+
+#End Region    ' USERNOTE
+
    Friend Function IsVacuumMovePossible() As Boolean
       ' Recupero diametro lama corrente
       EgtTdbSetCurrTool(sCurrSaw)

Machine/MachineCNPageUC.xaml

@@ -34,16 +34,21 @@
                   <ColumnDefinition Width="1.5*"/>
                </Grid.ColumnDefinitions>
 
-               <Button Name="AutoBtn" Grid.Column="0"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="ManualBtn" Grid.Column="1"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="MDIBtn" Grid.Column="2"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="SingleBtn" Grid.Column="3"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-               <Button Name="HomeBtn" Grid.Column="4"
-                  Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <ToggleButton Name="AutoBtn" Grid.Column="0"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
+               <ToggleButton Name="ManualBtn" Grid.Column="1"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
+               <ToggleButton Name="MDIBtn" Grid.Column="2"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
+               <ToggleButton Name="SingleBtn" Grid.Column="3"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
+               <ToggleButton Name="HomeBtn" Grid.Column="4"
+                  Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}"
+                  Foreground="White"/>
 
             </Grid>
 
@@ -57,7 +62,7 @@
                   <ColumnDefinition Width="2*"/>
                </Grid.ColumnDefinitions>
 
-                    <Button Name="StartBtn" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
+               <Button Name="StartBtn" Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
                <Button Name="StopBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
                <Button Name="ResetBtn" Grid.Column="2"

Machine/MachineCNPageUC.xaml.vb

@@ -8,6 +8,8 @@ Public Class MachineCNPageUC
    Private m_bFirst As Boolean = True
    Private m_ButtonPower As New List(Of MachineButton)
 
+   Private m_nCurrMode As Integer = 0
+
    Private Sub TestingPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       StartBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 1)
       StopBtn.Content = EgtMsg(MSG_MACHINECNPAGEUC + 2)
@@ -51,6 +53,9 @@ Public Class MachineCNPageUC
          PartProgTransferGpBx.Visibility = Windows.Visibility.Hidden
       End If
 
+      ' gestione visuliazzazione ToggleButton Auto/Sinlge/Mdi/Manula/Home
+      SetCncMode()
+
       '------ NUOVI BOTTONI ----------
       ' Lettura configurazione bottoni (per impostare l'uso del Joystick) da Ini di macchina
       m_ButtonPower.Clear()
@@ -98,6 +103,53 @@ Public Class MachineCNPageUC
 
    End Sub
 
+   Private Sub SetCncMode()
+      Dim Mode As Integer = m_nCurrMode
+      Select Case Mode
+         Case 0
+            ' Auoto
+            MDIConfirmBtn.IsEnabled = False
+            AutoBtn.IsChecked = True
+            SingleBtn.IsChecked = False
+            MDIBtn.IsChecked = False
+            ManualBtn.IsChecked = False
+            HomeBtn.IsChecked = False
+         Case 1
+            ' Single
+            MDIConfirmBtn.IsEnabled = False
+            AutoBtn.IsChecked = False
+            SingleBtn.IsChecked = True
+            MDIBtn.IsChecked = False
+            ManualBtn.IsChecked = False
+            HomeBtn.IsChecked = False
+         Case 2
+            ' Mdi
+            MDIConfirmBtn.IsEnabled = True
+            AutoBtn.IsChecked = False
+            SingleBtn.IsChecked = False
+            MDIBtn.IsChecked = True
+            ManualBtn.IsChecked = False
+            HomeBtn.IsChecked = False
+         Case 7
+            ' Manual
+            MDIConfirmBtn.IsEnabled = False
+            AutoBtn.IsChecked = False
+            SingleBtn.IsChecked = False
+            MDIBtn.IsChecked = False
+            ManualBtn.IsChecked = True
+            HomeBtn.IsChecked = False
+         Case 8
+            ' Home
+            MDIConfirmBtn.IsEnabled = False
+            AutoBtn.IsChecked = False
+            SingleBtn.IsChecked = False
+            MDIBtn.IsChecked = False
+            ManualBtn.IsChecked = False
+            HomeBtn.IsChecked = True
+      End Select
+
+   End Sub
+
    Private Sub StartBtn_Click(sender As Object, e As RoutedEventArgs) Handles StartBtn.Click
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          Dim sDBVarPath As String = ""
@@ -278,4 +330,9 @@ Public Class MachineCNPageUC
       End If
    End Sub
 
+   Friend Sub CncModeChange(nMode As Integer)
+      m_nCurrMode = nMode
+      SetCncMode()
+   End Sub
+
 End Class

Machine/MachineStatusUC.xaml.vb

@@ -248,16 +248,16 @@ Public Class MachineStatusUC
          dL3 = ptTip.z
       End If
       ' Visualizzazione
-      Axis1TxBx.Text = LenToString(dL1, -3)
-      Axis2TxBx.Text = LenToString(dL2, -3)
-      Axis3TxBx.Text = LenToString(dL3, -3)
+      Axis1TxBx.Text = LenToString(dL1, -3, True)
+      Axis2TxBx.Text = LenToString(dL2, -3, True)
+      Axis3TxBx.Text = LenToString(dL3, -3, True)
       Axis4TxBx.Text = DoubleToString(dR1, -3)
       Axis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then Axis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then Axis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then Axis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then Axis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then Axis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayPositionDelta()
@@ -265,22 +265,28 @@ Public Class MachineStatusUC
       Dim dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10 As Double
       m_MainWindow.m_CNCommunication.GetAxesDeltas(dL1, dL2, dL3, dR1, dR2, dA6, dA7, dA8, dA9, dA10)
       ' Visualizzazione
-      DeltaAxis1TxBx.Text = LenToString(dL1, -3)
-      DeltaAxis2TxBx.Text = LenToString(dL2, -3)
-      DeltaAxis3TxBx.Text = LenToString(dL3, -3)
+      DeltaAxis1TxBx.Text = LenToString(dL1, -3, True)
+      DeltaAxis2TxBx.Text = LenToString(dL2, -3, True)
+      DeltaAxis3TxBx.Text = LenToString(dL3, -3, True)
       DeltaAxis4TxBx.Text = DoubleToString(dR1, -3)
       DeltaAxis5TxBx.Text = DoubleToString(dR2, -3)
       If m_AxesNumber >= 6 Then DeltaAxis6TxBx.Text = DoubleToString(dA6, -3)
-      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3)
-      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3)
-      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3)
-      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3)
+      If m_AxesNumber >= 7 Then DeltaAxis7TxBx.Text = LenToString(dA7, -3, True)
+      If m_AxesNumber >= 8 Then DeltaAxis8TxBx.Text = LenToString(dA8, -3, True)
+      If m_AxesNumber >= 9 Then DeltaAxis9TxBx.Text = LenToString(dA9, -3, True)
+      If m_AxesNumber >= 10 Then DeltaAxis10TxBx.Text = LenToString(dA10, -3, True)
    End Sub
 
    Sub DisplayFeed()
       Dim dRealFeed As Double = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+      ' modifica richiesta 26/05/2023 da Rosario per cliente Lanzetta
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         dRealFeed = m_CN.d_DInterpo_Prog_Feed
+      Else
+         dRealFeed = m_CN.d_DInterpo_Prog_Feed * m_CN.d_DInterpo_Feed_override / 100
+      End If
       'Feed = DoubleToString(dRealFeed, 0)
-      FeedTxBx.Text = LenToString(dRealFeed, 0)
+      FeedTxBx.Text = LenToString(dRealFeed, 0, True)
       'FeedOverride = DoubleToString(m_CN.d_DInterpo_Feed_override, 0) & "%"
       Dim dFeedOverride As Double = m_CN.d_DInterpo_Feed_override
       FeedOverrideTxBx.Text = DoubleToString(dFeedOverride, 0) & "%"
@@ -304,6 +310,8 @@ Public Class MachineStatusUC
       If m_MainWindow.m_CNCommunication.m_nNCType = 3 AndAlso m_MainWindow.m_CNCommunication.m_CN.m_IsSiemensOne Then
          dSpindlePower = m_CN.d_data(0)
          dSpindleOvr = m_CN.d_data(1)
+      ElseIf m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         dSpindlePower = m_CN.d_spindle_power / 1000
       Else
          dSpindlePower = m_CN.d_spindle_power
          dSpindleOvr = If(m_CN.bPowerOvr > 0, m_CN.d_spindle_power / m_CN.bPowerOvr * 100, 0)

Machine/MachiningDbPageUC.xaml

@@ -246,7 +246,7 @@
 
             <TextBlock Name="SideAngleTxBl" Grid.Column="2" Grid.Row="3" Grid.RowSpan="3"
                Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="3" Grid.Row="3" Grid.RowSpan="3" Margin="0,0,15,0"
+            <EgtWPFLib:EgtTextBox Name="SideAngleTxBx" Grid.Column="3" Grid.Row="3" Grid.RowSpan="3" Margin="0,0,15,0" IsLength="False"
                Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
             <TextBlock Name="StepTypeTxBl" Grid.Column="0" Grid.Row="6" Grid.RowSpan="3"
@@ -576,7 +576,7 @@
 
                 <TextBlock Name="ForwardAngleTxBl" Grid.Column="0" Grid.Row="6" Grid.RowSpan="3"
                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                <EgtWPFLib:EgtTextBox Name="ForwardAngleTxBx" Grid.Column="1" Grid.Row="6" Grid.RowSpan="3"
+                <EgtWPFLib:EgtTextBox Name="ForwardAngleTxBx" Grid.Column="1" Grid.Row="6" Grid.RowSpan="3" IsLength="False"
                      Style="{DynamicResource OmagCut_MachLeftCalculatorTextBoxInBorder}" />
 
                 <Border Name="LiHoleBrd" Grid.Column="0" Grid.Row="9" Grid.ColumnSpan="4" Grid.RowSpan="6"
@@ -605,12 +605,12 @@
 
                         <TextBlock Name="LpTurnsTxBl" Grid.Column="0" Grid.Row="1" Grid.RowSpan="2" 
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                        <EgtWPFLib:EgtTextBox Name="LpTurnsTxBx" Grid.Column="1" Grid.Row="1"
+                        <EgtWPFLib:EgtTextBox Name="LpTurnsTxBx" Grid.Column="1" Grid.Row="1" IsLength="False"
                              Style="{DynamicResource OmagCut_MachLeftCalculatorTextBoxInBorder}" />
 
                         <TextBlock Name="HpTurnsTxBl" Grid.Column="2" Grid.Row="1"
                              Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                        <EgtWPFLib:EgtTextBox Name="HpTurnsTxBx" Grid.Column="3" Grid.Row="1"
+                        <EgtWPFLib:EgtTextBox Name="HpTurnsTxBx" Grid.Column="3" Grid.Row="1" IsLength="False"
                              Style="{DynamicResource OmagCut_MachLeftCalculatorTextBoxInBorder}" />
 
                     </Grid>
@@ -725,7 +725,7 @@
 
                <TextBlock Name="SpeedTxBl" Grid.Column="0"
                   Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-               <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1"
+               <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1" IsLength="False"
                   Style="{DynamicResource OmagCut_MachToolCalculatorTextBox}" />
 
             </Grid>

Machine/MachiningDbPageUC.xaml.vb

@@ -899,11 +899,11 @@ Public Class MachiningDbPageUC
       For Each Material As MachiningMaterial In m_MaterialsList
          If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
             If Material.bIsActive Then
-               sMaterialString += Material.nId.ToString & "." & Material.nSubId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
+               sMaterialString += Material.nId.ToString & "." & Material.nSubId.ToString & "," & DoubleToString(Material.dMinThickness, 3) & "," & DoubleToString(Material.dMaxThickness, 3) & ";"
             End If
          Else
             If Material.bIsActive Then
-               sMaterialString += Material.nId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
+               sMaterialString += Material.nId.ToString & "," & DoubleToString(Material.dMinThickness, 3) & "," & DoubleToString(Material.dMaxThickness, 3) & ";"
             End If
          End If
       Next

Machine/PolishingsPageUC.xaml.vb

@@ -61,8 +61,8 @@ Public Class PolishingsPageUC
       RepeatTxBl.Text = EgtMsg(91093)             ' Ripetizioni
       StepTxBl.Text = EgtMsg(90787)               ' Passo
       OffSetTxBl.Text = EgtMsg(91089)             ' Offset
-      RadiusTxBl.Text = "Raggio"
-      DistanceTxBl.Text = "Distanza"
+      RadiusTxBl.Text = EgtMsg(91139)             ' Raggio
+      DistanceTxBl.Text = EgtMsg(91140)           ' Distanza
       LiLoGpBx.Header = EgtMsg(91094)             ' Attacco/Uscita
       LiLenTxBl.Text = EgtMsg(91097)              ' Lunghezza
       LiHeightTxBl.Text = EgtMsg(91095)           ' Altezza

Machine/ToolChangerPosUC.xaml

@@ -9,7 +9,7 @@
    <!-- Definizione del ToolHolderUc -->
    <Grid>
       <Image Source="/Resources/ToolChangerPos.png"/>
-      <ToggleButton Name="Tool" Width="50" Height="50" Margin="22,40,26,8" Background="#7FB4B4B4">
+      <ToggleButton Name="Tool" Width="50" Height="50" Margin="62,10,16,10" Background="#7FB4B4B4">
          <ToggleButton.Template>
             <ControlTemplate TargetType="{x:Type ToggleButton}">
                <Grid>
@@ -25,7 +25,7 @@
 
          </ToggleButton.Template>
       </ToggleButton>
-      <TextBlock Name="PositionNameTxBl" Height="22" Width="68" FontSize="16" Margin="12,16,41,61"/>
+      <TextBlock Name="PositionNameTxBl" Height="22" Width="50" FontSize="16" Margin="20,40,70,53"/>
 
    </Grid>
 </UserControl>

Machine/ToolsDbPageUC.xaml

@@ -281,12 +281,12 @@
                   </Grid.ColumnDefinitions>
 
                   <TextBlock Name="SpeedTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1"
+                  <EgtWPFLib:EgtTextBox Name="SpeedTxBx" Grid.Column="1" IsLength="False"
                      Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                   <TextBlock Name="MaxSpeedTxBl" Grid.Column="2"
                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                  <EgtWPFLib:EgtTextBox Name="MaxSpeedTxBx" Grid.Column="3"
+                  <EgtWPFLib:EgtTextBox Name="MaxSpeedTxBx" Grid.Column="3" IsLength="False"
                      Style="{DynamicResource OmagCut_CalculatorTextBoxInGroupBox}" />
 
                </Grid>
@@ -384,7 +384,7 @@
 
                   <TextBlock Name="MaxAbsorptionTxBl" Grid.Column="0"
                      Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Grid.ColumnSpan="1" ScrollViewer.VerticalScrollBarVisibility="Disabled" TextWrapping="Wrap"/>
-                  <EgtWPFLib:EgtTextBox Name="MaxAbsorptionTxBx" Grid.Column="1" 
+                  <EgtWPFLib:EgtTextBox Name="MaxAbsorptionTxBx" Grid.Column="1" IsLength="False"
                      Style="{DynamicResource OmagCut_LeftCalculatorTextBoxInBorder}" />
 
                   <TextBlock Name="MinFeedTxBl" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" />

Machine/WaterJetPageUC.xaml

@@ -8,256 +8,266 @@
    mc:Ignorable="d" 
    d:DesignHeight="768" d:DesignWidth="1280" Initialized="WaterJetPage_Initialized">
 
-    <!-- Definizione della PolishingsPage -->
-    <Border Style="{DynamicResource OmagCut_PageBorder}">
+   <!-- Definizione della PolishingsPage -->
+   <Border Style="{DynamicResource OmagCut_PageBorder}">
 
-        <Grid Name="WaterJetPageGrid" >
-            <Grid.ColumnDefinitions>
-                <ColumnDefinition Width="3*"/>
-                <ColumnDefinition Width="8*"/>
-                <ColumnDefinition Width="4*"/>
-            </Grid.ColumnDefinitions>
-            <Grid.RowDefinitions>
-                <RowDefinition Height="8*"/>
-                <RowDefinition Height="1*"/>
-            </Grid.RowDefinitions>
+      <Grid Name="WaterJetPageGrid" >
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="8*"/>
+            <ColumnDefinition Width="4*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+         </Grid.RowDefinitions>
 
-            <!--Lista dei materiali-->
-            <GroupBox Name="MaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
+         <!--Lista dei materiali-->
+         <GroupBox Name="MaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" Grid.Column="0"
                       Header="{Binding Material_Msg}"
                       Grid.Row="0" BorderThickness="0">
 
-                <Grid>
-                    <Grid.RowDefinitions>
-                        <RowDefinition Height="7*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                    </Grid.RowDefinitions>
+            <Grid>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="7*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+               </Grid.RowDefinitions>
 
-                    <!--Lista dei materiali-->
-                    <ListBox Name="MaterialsLstBx" 
+               <!--Lista dei materiali-->
+               <ListBox Name="MaterialsLstBx" 
                              ItemsSource="{Binding MaterialList}" SelectedItem="{Binding SelMaterial}"
                              Grid.RowSpan="2">
-                        <ListBox.ItemTemplate>
-                            <DataTemplate>
-                                <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                            </DataTemplate>
-                        </ListBox.ItemTemplate>
-                    </ListBox>
-                    <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
-                    <EgtWPFLib:EgtTextBox Name="NewMaterialNameTxBx" Grid.Row="1" 
+                  <ListBox.ItemTemplate>
+                     <DataTemplate>
+                        <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                     </DataTemplate>
+                  </ListBox.ItemTemplate>
+               </ListBox>
+               <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
+               <EgtWPFLib:EgtTextBox Name="NewMaterialNameTxBx" Grid.Row="1" 
                                           Width="220"
                                           Text="{Binding sNewMaterial}"
                                           Visibility="{Binding NewMaterial_Visibility}"
                                           Style="{DynamicResource OmagCut_KeyboardTextBox}" 
                                           KeyboardPosition="Top"/>
-                    <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
-                    <UniformGrid Grid.Row="2" Columns="3">
-                        <Button Name="NewMaterialBtn" Grid.Column="0"
+               <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
+               <UniformGrid Grid.Row="2" Columns="3">
+                  <Button Name="NewMaterialBtn" Grid.Column="0"
                                 Content="{Binding New_Msg}"
                                 Command="{Binding NewMaterialCommand}"
                                 Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                        <Button Name="DeleteMaterialBtn" Grid.Column="1"
+                  <Button Name="DeleteMaterialBtn" Grid.Column="1"
                                 Content="{Binding Delete_Msg}"
                                 Command="{Binding DeleteMaterialCommand}"
                                 Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                        <Button Name="ModifyMaterialBtn" Grid.Column="1"
+                  <Button Name="ModifyMaterialBtn" Grid.Column="1"
                                 Content="{Binding Modify_Msg}"
                                 Command="{Binding ModifyMaterialCommand}"
                                 Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                    </UniformGrid>
+               </UniformGrid>
 
-                </Grid>
+            </Grid>
 
-            </GroupBox>
+         </GroupBox>
 
-            <!--Raggruppo all'interno della stessa cornice le sottocatogorie e i parametri-->
-            <Border Style="{DynamicResource OmagCut_Border}" 
+         <!--Raggruppo all'interno della stessa cornice le sottocatogorie e i parametri-->
+         <Border Style="{DynamicResource OmagCut_Border}" 
                     Grid.Column="1" Grid.Row="0" 
                     Grid.ColumnSpan="2" Grid.RowSpan="1">
 
-                <Grid Name="SubMaterialGrd" Grid.Column="1">
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="2*"/>
-                    </Grid.ColumnDefinitions>
-                    <Grid.RowDefinitions>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                        <RowDefinition Height="1*"/>
-                    </Grid.RowDefinitions>
+            <Grid Name="SubMaterialGrd" Grid.Column="1">
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="2*"/>
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+               </Grid.RowDefinitions>
 
-                    <!--Sottocategoria dei materiali associata alla lista precedente-->
-                    <GroupBox Name="SubMaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" 
+               <!--Sottocategoria dei materiali associata alla lista precedente-->
+               <GroupBox Name="SubMaterialGpBx" Style="{DynamicResource OmagCut_GroupBox}" 
                               Header="{Binding SubMaterial_Msg}"
                               Grid.Column="0" Grid.Row="0" 
                               Grid.ColumnSpan="1" Grid.RowSpan="8" BorderThickness="0">
 
-                        <Grid Grid.Column="1">
-                            <Grid.RowDefinitions>
-                                <RowDefinition Height="7*"/>
-                                <RowDefinition Height="1*"/>
-                                <RowDefinition Height="1*"/>
-                            </Grid.RowDefinitions>
+                  <Grid Grid.Column="1">
+                     <Grid.RowDefinitions>
+                        <RowDefinition Height="7*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                     </Grid.RowDefinitions>
 
-                            <!--Lista dei materiali-->
-                            <ListBox Name="SubMaterialsLstBx" ItemsSource="{Binding Path=SelectedItem.SubMaterialList, ElementName=MaterialsLstBx}"
+                     <!--Lista dei materiali-->
+                     <ListBox Name="SubMaterialsLstBx" ItemsSource="{Binding Path=SelectedItem.SubMaterialList, ElementName=MaterialsLstBx}"
                                      SelectedItem="{Binding Path=SelectedItem.SelSubMaterial, ElementName=MaterialsLstBx}"
                                      Grid.RowSpan="2">
-                                <ListBox.ItemTemplate>
-                                    <DataTemplate>
-                                        <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                                    </DataTemplate>
-                                </ListBox.ItemTemplate>
-                            </ListBox>
+                        <ListBox.ItemTemplate>
+                           <DataTemplate>
+                              <TextBlock Text="{Binding Name}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                           </DataTemplate>
+                        </ListBox.ItemTemplate>
+                     </ListBox>
 
-                            <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
-                            <EgtWPFLib:EgtTextBox Name="NewSubMaterialNameTxBx" Grid.Row="1" 
+                     <!--Campo visualizzato solo per aggiungere un nuovo materiale-->
+                     <EgtWPFLib:EgtTextBox Name="NewSubMaterialNameTxBx" Grid.Row="1" 
                                                   Width="220"
                                                   Text="{Binding sNewSubMaterial}"
                                                   Visibility="{Binding NewSubMaterial_Visibility}"
                                                   Style="{DynamicResource OmagCut_KeyboardTextBox}" 
                                                   KeyboardPosition="Top"/>
 
-                            <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
-                            <UniformGrid Grid.Row="2" Columns="3">
-                                <Button Name="NewSubMaterialBtn" Grid.Column="0"
+                     <!--Pulsanti per aggiungere/rimuovere/salvare la lista-->
+                     <UniformGrid Grid.Row="2" Columns="3">
+                        <Button Name="NewSubMaterialBtn" Grid.Column="0"
                                         Content="{Binding New_Msg}"
                                         Command="{Binding NewSubMaterialCommand}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                                <Button Name="RemoveSubMaterialBtn" Grid.Column="1"
+                        <Button Name="RemoveSubMaterialBtn" Grid.Column="1"
                                         Content="{Binding Delete_Msg}"
                                         Command="{Binding DeleteSubMaterialCommand}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                                <Button Name="ModifySubMaterialBtn" Grid.Column="1"
+                        <Button Name="ModifySubMaterialBtn" Grid.Column="1"
                                         Content="{Binding Modify_Msg}"
                                         Command="{Binding ModifySubMaterialCommand}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                            </UniformGrid>
+                     </UniformGrid>
 
-                        </Grid>
+                  </Grid>
 
-                    </GroupBox>
+               </GroupBox>
 
-                    <!--Lista dei parametri associata alla sottovcategoria dei materiali-->
-                    <GroupBox Name="ParamsGpBx" 
+               <!--Lista dei parametri associata alla sottovcategoria dei materiali-->
+               <GroupBox Name="ParamsGpBx" 
                               Grid.Column="1" Grid.Row="0" Margin="0,0,0,3"
                               Grid.ColumnSpan="3" Grid.RowSpan="8" BorderThickness="0">
-                        
-                        <!--Titolazione delle colonne della tabella-->
-                        <GroupBox.Header >
-                            <Grid Width="700">
-                                <Grid.ColumnDefinitions>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                    <ColumnDefinition Width="1*"/>
-                                </Grid.ColumnDefinitions>
 
-                                <TextBlock Text="{Binding Thickness_Msg}" Grid.Column="0" HorizontalAlignment="Center"
+                  <!--Titolazione delle colonne della tabella-->
+                  <GroupBox.Header >
+                     <Grid Width="700">
+                        <Grid.ColumnDefinitions>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="1*"/>
+                        </Grid.ColumnDefinitions>
+
+                        <TextBlock Text="{Binding Thickness_Msg}" Grid.Column="0" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                                <TextBlock Text="{Binding Q1_Msg}" Grid.Column="1" HorizontalAlignment="Center"
+                        <TextBlock Text="{Binding Q1_Msg}" Grid.Column="1" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                                <TextBlock Text="{Binding Q2_Msg}" Grid.Column="2" HorizontalAlignment="Center"
+                        <TextBlock Text="{Binding Q2_Msg}" Grid.Column="2" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                                <TextBlock Text="{Binding Q3_Msg}" Grid.Column="3" HorizontalAlignment="Center"
+                        <TextBlock Text="{Binding Q3_Msg}" Grid.Column="3" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                                <TextBlock Text="{Binding Q4_Msg}" Grid.Column="4" HorizontalAlignment="Center"
+                        <TextBlock Text="{Binding Q4_Msg}" Grid.Column="4" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                                <TextBlock Text="{Binding Q5_Msg}" Grid.Column="5" HorizontalAlignment="Center"
+                        <TextBlock Text="{Binding Q5_Msg}" Grid.Column="5" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                                <TextBlock Text="{Binding QExtra_Msg}" Grid.Column="6" HorizontalAlignment="Center"
+                        <TextBlock Text="{Binding QExtra_Msg}" Grid.Column="6" HorizontalAlignment="Center"
                                            Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
                                            FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
-                            </Grid>
-                            
-                        </GroupBox.Header>
-                        
-                        <!--Definizione della Grid dei parametri delle lavorazioni-->
-                        <Grid Grid.Column="2">
-                            <Grid.RowDefinitions>
-                                <RowDefinition Height="7*"/>
-                                <RowDefinition Height="1*"/>
-                                <RowDefinition Height="1*"/>
-                            </Grid.RowDefinitions>
+                        <TextBlock Text="{Binding AngComp_Msg}" Grid.Column="7" HorizontalAlignment="Center"
+                                           Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}" 
+                                           FontSize="{DynamicResource FontSize_GroupBoxHeader}"/>
+                     </Grid>
 
-                            <ListBox Name="ParamLstBx"
+                  </GroupBox.Header>
+
+                  <!--Definizione della Grid dei parametri delle lavorazioni-->
+                  <Grid Grid.Column="2">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="308*"/>
+                        <ColumnDefinition Width="73*"/>
+                     </Grid.ColumnDefinitions>
+                     <Grid.RowDefinitions>
+                        <RowDefinition Height="7*"/>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                     </Grid.RowDefinitions>
+
+                     <ListBox Name="ParamLstBx"
                                      ItemsSource="{Binding Path=SelectedItem.ParamList , ElementName=SubMaterialsLstBx}"
                                      SelectedItem="{Binding Path=SelectedItem.SelWjParam , ElementName=SubMaterialsLstBx}"
                                      Margin="0,0,0,0"
-                                     Grid.RowSpan="2">
-                                <ListBox.ItemTemplate>
-                                    <DataTemplate>
-                                        <Grid Width="700">
-                                            <Grid.ColumnDefinitions>
-                                                <ColumnDefinition Width="1*"/>
-                                                <ColumnDefinition Width="1*"/>
-                                                <ColumnDefinition Width="1*"/>
-                                                <ColumnDefinition Width="1*"/>
-                                                <ColumnDefinition Width="1*"/>
-                                                <ColumnDefinition Width="1*"/>
-                                                <ColumnDefinition Width="1*"/>
-                                            </Grid.ColumnDefinitions>
+                                     Grid.RowSpan="2" Grid.ColumnSpan="2">
+                        <ListBox.ItemTemplate>
+                           <DataTemplate>
+                              <Grid Width="700">
+                                 <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                    <ColumnDefinition Width="1*"/>
+                                 </Grid.ColumnDefinitions>
 
-                                            <EgtWPFLib:EgtTextBox Text="{Binding Thickness}" Grid.Column="0"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Thickness}" Grid.Column="0"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                            <EgtWPFLib:EgtTextBox Text="{Binding Q1}" Grid.Column="1"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q1}" Grid.Column="1"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                            <EgtWPFLib:EgtTextBox Text="{Binding Q2}" Grid.Column="2"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q2}" Grid.Column="2"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                            <EgtWPFLib:EgtTextBox Text="{Binding Q3}" Grid.Column="3"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q3}" Grid.Column="3"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                            <EgtWPFLib:EgtTextBox Text="{Binding Q4}" Grid.Column="4"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q4}" Grid.Column="4"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                            <EgtWPFLib:EgtTextBox Text="{Binding Q5}" Grid.Column="5"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding Q5}" Grid.Column="5"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
-                                            <EgtWPFLib:EgtTextBox Text="{Binding QExtra}" Grid.Column="6"
+                                 <EgtWPFLib:EgtTextBox Text="{Binding QExtra}" Grid.Column="6"
                                                        Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                                 <EgtWPFLib:EgtTextBox Text="{Binding dAngComp}" Grid.Column="7" IsLength="False"
+                                                       Style="{DynamicResource OmagCut_CalculatorParamWjTextBox}" />
+                              </Grid>
+                           </DataTemplate>
+                        </ListBox.ItemTemplate>
+                     </ListBox>
 
-                                        </Grid>
-                                    </DataTemplate>
-                                </ListBox.ItemTemplate>
-                            </ListBox>
-
-                            <UniformGrid Grid.Row="2" Columns="9" Grid.ColumnSpan="3">
-                                <Button Name="NewParamBtn" Grid.Column="0"
+                     <UniformGrid Grid.Row="2" Columns="9" Grid.ColumnSpan="2">
+                        <Button Name="NewParamBtn" Grid.Column="0"
                                         Command="{Binding NewWjParamCommand}"
                                         Content="{Binding New_Msg}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                                <Button Name="RemoveParamBtn" Grid.Column="1"
+                        <Button Name="RemoveParamBtn" Grid.Column="1"
                                         Command="{Binding DeleteWjParamCommand}"
                                         Content="{Binding Delete_Msg}"
                                         Style="{DynamicResource OmagCut_WjDbRightGrayGradientYellowTextButton}"/>
-                            </UniformGrid>
+                     </UniformGrid>
 
-                        </Grid>
+                  </Grid>
 
-                    </GroupBox>
+               </GroupBox>
 
-                </Grid>
-            </Border>
-            <Button Name="SaveKitBtn" Grid.Row="2" Grid.Column="2"
+            </Grid>
+         </Border>
+         <Button Name="SaveKitBtn" Grid.Row="2" Grid.Column="2"
                     Command="{Binding SaveCommand}"
                     Content="{Binding Save_Msg}"
                     Style="{DynamicResource OmagCut_RightGrayGradientYellowTextButton}"/>
-        </Grid>
+      </Grid>
 
-    </Border>
+   </Border>
 
 </UserControl>

Machine/WaterJetPageUC.xaml.vb

@@ -14,12 +14,20 @@ Public Class WaterJetPageUC
 
    Private Sub WaterJetPage_Initialized(sender As Object, e As EventArgs)
       m_refWaterjetDbWindowVM = New WaterjetDbWindowVM_OmagCUT(m_MainWindow.m_CurrentMachine.sMachDir)
+      '----------------------------------------------------------------------------------------
+      ' TEMPORANEO - se dati in INCH e richiesta di frazioni eseguo la conversione in frazione!
+      ConvertParamListValueToFracrion()
+      '----------------------------------------------------------------------------------------
       Me.DataContext = m_refWaterjetDbWindowVM
       EgtWPFLib.Utility.MainWindow = m_MainWindow
    End Sub
 
    Public Sub WaterJetPage_Reinitialize()
       m_refWaterjetDbWindowVM = New WaterjetDbWindowVM_OmagCUT(m_MainWindow.m_CurrentMachine.sMachDir)
+      '----------------------------------------------------------------------------------------
+      ' TEMPORANEO - se dati in INCH e richiesta di frazioni eseguo la conversione in frazione!
+      ConvertParamListValueToFracrion()
+      '----------------------------------------------------------------------------------------
       Me.DataContext = m_refWaterjetDbWindowVM
    End Sub
 
@@ -51,5 +59,48 @@ Public Class WaterJetPageUC
       End If
    End Sub
 
+   Private Sub ConvertParamListValueToFracrion()
+      ' TEMPORANEO - se dati in INCH e richiesta di frazioni eseguo la conversione in frazione!
+      Dim Index1 As Integer = 0
+      For Index1 = 0 To m_refWaterjetDbWindowVM.MaterialList.Count - 1
+         Dim Index2 As Integer = 0
+         For Index2 = 0 To m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList.Count - 1
+            Dim Index3 As Integer = 0
+            For Index3 = 0 To m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList.Count - 1
+               Dim dThickness As Double
+               Dim dQ1 As Double
+               Dim dQ2 As Double
+               Dim dQ3 As Double
+               Dim dQ4 As Double
+               Dim dQ5 As Double
+               Dim dQExtra As Double
+               Dim dAngComp As Double
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Thickness, dThickness)
+               Dim sVal As String = LenToString(dThickness, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetThickness(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q1, dQ1)
+               sVal = LenToString(dQ1, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ1(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q2, dQ2)
+               sVal = LenToString(dQ2, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ2(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q3, dQ3)
+               sVal = LenToString(dQ3, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ3(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q4, dQ4)
+               sVal = LenToString(dQ4, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ4(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).Q5, dQ5)
+               sVal = LenToString(dQ5, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQ5(sVal)
+               StringToLen(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).QExtra, dQExtra)
+               sVal = LenToString(dQExtra, 3)
+               m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).SetQExtra(sVal)
+               StringToDouble(m_refWaterjetDbWindowVM.MaterialList(Index1).SubMaterialList(Index2).ParamList(Index3).dAngComp, dAngComp)
+            Next
+         Next
+      Next
+   End Sub
+
 End Class
 

Machine/WaterJetPageVM.vb

@@ -445,6 +445,12 @@ Public Class WaterjetDbWindowVM
       End Get
    End Property
 
+   Public ReadOnly Property AngComp_Msg As String
+      Get
+         Return "Ang"
+      End Get
+   End Property
+
    Public ReadOnly Property New_Msg As String
       Get
          Return "Nuovo"
@@ -516,7 +522,14 @@ Public Class WaterjetDbWindowVM
                         StringToDouble(sParams(4), dQ4)
                         StringToDouble(sParams(5), dQ5)
                         StringToDouble(sParams(6), dQExtra)
-                        QParamList.Add(New WjParam(QInd, dThickness, dQ1, dQ2, dQ3, dQ4, dQ5, dQExtra, m_refWaterPageV))
+                        Dim LocalWjParam As New WjParam(QInd, dThickness, dQ1, dQ2, dQ3, dQ4, dQ5, dQExtra, m_refWaterPageV)
+                        QParamList.Add(LocalWjParam)
+                        ' leggo il nuovo parametro di correzione conicità (di default il parametro è 0)
+                        If sParams.Length() >= 8 Then
+                           Dim dAngCompo As Double
+                           StringToDouble(sParams(7), dAngCompo)
+                           LocalWjParam.dAngComp = dAngCompo
+                        End If
                      End If
                      QInd += 1
                   End While
@@ -868,6 +881,17 @@ Public Class WjParam
       End Set
    End Property
 
+   ' angolo di compensazione conicità getto: 01/02/2023 ver 2.5b1
+   Private m_dAngComp As Double = 0
+   Public Property dAngComp As Double
+      Get
+         Return m_dAngComp
+      End Get
+      Set(value As Double)
+         m_dAngComp = value
+      End Set
+   End Property
+
    Public ReadOnly Property ParamLstBx_Width As Double
       Get
          Return m_refWaterPageV.ParamsGpBx.ActualWidth - 20

MainWindow.xaml.vb

@@ -38,6 +38,8 @@ Class MainWindow
    Friend m_MachinePageUC As MachinePageUC
    Friend m_OptionsPageUC As OptionsPageUC
 
+   Friend m_IsClosingApplication As Integer = 0
+
    ' Dichiarazione variabili direttori
    Private m_sExeRoot As String = String.Empty
    Private m_sDataRoot As String = String.Empty
@@ -303,7 +305,7 @@ Class MainWindow
       GetPrivateProfileString(S_MACH, K_CURRMACH, "", m_sCurrMachine, m_sIniFile)
       ' Impostazione path MachIni file
       m_sMachIniFile = m_sMachinesRoot & "\" & m_sCurrMachine & "\" & m_sCurrMachine & ".ini"
-      ' Impostazione path KitIni file
+      ' Impostazione path Kit file
       m_sKitsFile = m_sMachinesRoot & "\" & m_sCurrMachine & "\" & MACHININGS_DIR & "\" & KITS_FILE
       ' Imposto tipo di chiave
 #If TRIAL Then
@@ -321,11 +323,13 @@ Class MainWindow
       Dim sNestKey As String = ""
       EgtUILib.GetPrivateProfileString(S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
       EgtSetNestKey(sNestKey)
+      Dim bNetHwKey As Boolean = ( GetPrivateProfileInt(S_GENERAL, K_NETKEY, 0, m_sIniFile) = 1)
+      EgtSetNetHwKey( bNetHwKey)
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2406, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2406, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2505, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2505, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -605,6 +609,16 @@ Class MainWindow
       m_WorkInProgressPageUC.Prepare()
       m_WorkInProgressPageUC.UpdateTools()
 
+      Dim sVal As String = String.Empty
+      If m_CurrentMachine.GetUserNote("FsevLength", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, m_CurrentMachine.dFsevLength)
+         m_CurrentMachine.SetFsevLength(m_CurrentMachine.dFsevLength)
+      End If
+      If m_CurrentMachine.GetUserNote("FsevPerc", sVal, m_CurrentMachine.sCurrSaw) Then
+         StringToDouble(sVal, m_CurrentMachine.dFsevPerc)
+         m_CurrentMachine.SetFsevPerc(m_CurrentMachine.dFsevPerc)
+      End If
+
       ' Se macchina fotografica abilitata, ne inizializzo il gestore
 #If Not TRIAL Then
       If GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO) Then
@@ -682,6 +696,8 @@ Class MainWindow
             MainWindowGrid.Children.Remove(m_OptionsPageUC)
             MainWindowGrid.Children.Add(m_WorkInProgressPageUC)
             m_ActivePage = Pages.WorkInProgress
+         Case Else
+            WorkInProgressBtn.IsChecked = False
       End Select
    End Sub
 
@@ -740,6 +756,8 @@ Class MainWindow
             MainWindowGrid.Children.Add(m_CurrentProjectPageUC)
             m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_DirectCutPageUC)
             m_ActivePage = Pages.DirectCut
+         Case Else
+            WorkInProgressBtn.IsChecked = False
       End Select
    End Sub
 
@@ -795,6 +813,8 @@ Class MainWindow
             MainWindowGrid.Children.Add(m_CurrentProjectPageUC)
             m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_CadCutPageUC)
             m_ActivePage = Pages.CadCut
+         Case Else
+            CadCutBtn.IsChecked = False
       End Select
    End Sub
 
@@ -851,6 +871,8 @@ Class MainWindow
             MainWindowGrid.Children.Add(m_CurrentProjectPageUC)
             m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_FrameCutPageUC)
             m_ActivePage = Pages.FrameCut
+         Case Else
+            If FrameCutBtn.IsEnabled Then FrameCutBtn.IsChecked = False
       End Select
    End Sub
 
@@ -902,6 +924,8 @@ Class MainWindow
             MainWindowGrid.Children.Remove(m_OptionsPageUC)
             MainWindowGrid.Children.Add(m_MachinePageUC)
             m_ActivePage = Pages.Machine
+         Case Else
+            MachineBtn.IsChecked = False
       End Select
    End Sub
 
@@ -958,7 +982,7 @@ Class MainWindow
             MainWindowGrid.Children.Add(m_OptionsPageUC)
             m_ActivePage = Pages.Options
          Case Pages.Options
-            OptionsBtn.IsChecked = True
+            OptionsBtn.IsChecked = False
       End Select
    End Sub
 
@@ -1063,6 +1087,19 @@ Class MainWindow
          m_CurrentProjectPageUC.SaveNamedProject()
          m_CurrentProjectPageUC.SaveProject()
       End If
+      ' Inizio la chiusura del programma (verifico di aver terminato il processo DripFeed)
+      EgtOutLog("Iniziato processo di chiusura programma")
+      m_IsClosingApplication = 1
+      Dim nCount As Integer = 0
+      While m_IsClosingApplication <> 2
+         If nCount > 5 Then
+            Exit While
+         End If
+         ' verifico che il processo DripFeed sia terminato
+         EgtOutLog("Stato chiusura programma: " & m_IsClosingApplication.ToString)
+         Thread.Sleep(100)
+         nCount += 1
+      End While
       ' Uscita
       MainWindowExit()
    End Sub
@@ -1104,19 +1141,21 @@ Class MainWindow
       ' Se non sono in tagli diretti tutto ok
       If m_ActivePage <> Pages.DirectCut Then Return True
       ' Concludo le attività in corso
-      Select Case m_DirectCutPageUC.m_ActiveDirectCutPage
-         Case DirectCutPageUC.DirectCutPages.SingleCut
-            m_DirectCutPageUC.m_SingleCut.SingleCut_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.MultipleCut
-            m_DirectCutPageUC.m_MultipleCut.MultipleCut_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.GridCut
-            m_DirectCutPageUC.m_GridCut.GridCut_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.CopyTemplate
-            m_DirectCutPageUC.m_CopyTemplate.CopyTemplate_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.FlatteningCut
-            m_DirectCutPageUC.m_FlatteningCut.FlatteningCut_Unloaded(sender, e)
-         Case DirectCutPageUC.DirectCutPages.SawTest
-            m_DirectCutPageUC.m_SawTest.SawTest_Unloaded(sender, e)
+      Select Case m_DirectCutPageUC.m_ControlsDirectCutUC.m_ActiveDirectCutPage
+         Case ControlsDirectCutUC.DirectCutPages.SingleCut
+            m_DirectCutPageUC.m_ControlsDirectCutUC.m_SingleCut.SingleCut_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.MultipleCut
+            m_DirectCutPageUC.m_ControlsDirectCutUC.m_MultipleCut.MultipleCut_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.GridCut
+            m_DirectCutPageUC.m_ControlsDirectCutUC.m_GridCut.GridCut_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.FlatteningCut
+            m_DirectCutPageUC.m_ControlsDirectCutUC.m_FlatteningCut.FlatteningCut_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.CopyTemplate
+            m_DirectCutPageUC.m_ControlsDirectCutUC1.m_CopyTemplate.CopyTemplate_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.Polishing
+            m_DirectCutPageUC.m_ControlsDirectCutUC1.m_Polishing.Polishing_Unloaded(sender, e)
+         Case ControlsDirectCutUC.DirectCutPages.SawTest
+            m_DirectCutPageUC.m_ControlsDirectCutUC1.m_SawTest.SawTest_Unloaded(sender, e)
       End Select
       Return True
    End Function
@@ -1187,7 +1226,8 @@ Class MainWindow
          m_ProdLineTimer.Interval = TimeSpan.FromMilliseconds(2000)
          m_ProdLineTimer.Start()
       End If
-
+      ' di default attivo la pagina CadCut
+      m_ActivePage = MainWindow.Pages.CadCut
       ' seleziono il tipo di avvio
       m_CurrentProjectPageUC.StartProgram()
       ' aggiorno la grafica

My Project/AssemblyInfo.vb

@@ -20,9 +20,9 @@ Imports System.Windows
 <Assembly: AssemblyTitle("OmagCUTR32.exe")>
 <Assembly: AssemblyDescription("OmagCUT 32 bit")>
 #End If
-<Assembly: AssemblyCompany("EgalTech s.r.l.")>
+<Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("OmagCUT")>
-<Assembly: AssemblyCopyright("Copyright ©  2015-2022 by EgalTech s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2015-2023 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(False)>
 
@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.7.1")>
-<Assembly: AssemblyFileVersion("2.4.7.1")>
+<Assembly: AssemblyVersion("2.5.5.2")>
+<Assembly: AssemblyFileVersion("2.5.5.2")>

NcComm/CNCommunication.vb

@@ -2,6 +2,8 @@
 Imports System.Globalization
 Imports System.Collections.ObjectModel
 Imports EgtUILib
+Imports System.IO
+Imports System.Text
 
 Public Class CNCommunication
 
@@ -31,6 +33,7 @@ Public Class CNCommunication
    Private m_bNewDeltaData As Boolean = True
    Private m_bNewVarData As Boolean = False
    Private m_bTimerBusy As Boolean = False
+   Private m_bTimerAxesBusy As Boolean = False
 
    Private m_IsNewConsole As Boolean = False
 
@@ -39,6 +42,7 @@ Public Class CNCommunication
 
    ' Timer
    Private m_RefreshTimer As New DispatcherTimer
+   Private m_RefreshAxesFanuc As New DispatcherTimer
 
    ' Nomi e indici degli assi macchina
    Private m_bAxesOk As Boolean = False
@@ -101,6 +105,12 @@ Public Class CNCommunication
          m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(100)
          m_RefreshTimer.Start()
       End If
+      ' solo per controllo FANUC creo un timer apposito solo per la lettura degli assi
+      If m_nNCType = 4 Then
+         AddHandler m_RefreshAxesFanuc.Tick, AddressOf RefreshAxesFanucTimer_tick
+         m_RefreshAxesFanuc.Interval = TimeSpan.FromMilliseconds(50)
+         m_RefreshAxesFanuc.Start()
+      End If
 
       ' Leggo dati sugli assi della macchina
       ReadAxesData()
@@ -117,6 +127,8 @@ Public Class CNCommunication
 
          If m_nNCType = 3 Then
             RefreshNoEvents()
+         ElseIf m_nNCType = 4 Then
+            RefreshFANUC()
          Else
             Refresh()
          End If
@@ -129,8 +141,22 @@ Public Class CNCommunication
 
    End Sub
 
+   Private Sub RefreshAxesFanucTimer_tick()
+      If Not m_bTimerAxesBusy Then
+         m_bTimerAxesBusy = True
+         m_RefreshAxesFanuc.Stop()
+
+         RefreshAxesFANUC()
+
+         m_bTimerAxesBusy = False
+         m_RefreshAxesFanuc.Start()
+      Else
+         Dim nDummy As Integer = 10
+      End If
+   End Sub
+
    Private Sub ReadAxesData()
-      ' Nomi e indici degli assi macchina
+      ' Nomi e indici degli assi macchina: definisco il nome degli assi da satampare nella pagina MachineStatusUC
       m_bAxesOk = True
       GetPrivateProfileString(S_AXES, K_L1NAME, "X", m_sA1, m_MainWindow.GetMachIniFile())
       m_nA1 = GetPrivateProfileInt(S_AXES, K_L1ID, 0, m_MainWindow.GetMachIniFile())
@@ -222,6 +248,11 @@ Public Class CNCommunication
                m_CN = New Num.NumNC
             Case 3
                m_CN = New CN_Siemens
+            Case 4
+               ' Fanuc
+               m_CN = New Fanuc.Fanuc
+               ' proveddo a sovrscrivere i datti di comunicazione PC-NC settati di default nella classe CN_Generico
+               m_MainWindow.m_CurrentMachine.InitFANUC(m_CN)
          End Select
          ' Recupero la stringa di inizializzazione della comunicazione
 
@@ -354,8 +385,13 @@ Public Class CNCommunication
             If Not String.IsNullOrEmpty(sVal) Then m_CN.SetCnDataVar(CN_generico.CnData.Remote, sVal)
          End If
 
-            ' Inizializzo la comunicazione
-            m_CN.Init()
+         ' Solo per controllo FANUNC
+         GetPrivateProfileString(S_NCDATA, K_NAXES, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.nAxes, sVal)
+
+
+         ' Inizializzo la comunicazione
+         m_CN.Init()
 
       Catch ex As Exception
          ' set status to statusbar
@@ -418,6 +454,17 @@ Public Class CNCommunication
                   m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Red")
                End Try
             End If
+         Case 4
+            If IsNothing(m_CN) OrElse m_CN.n_state < 2 Then
+               ' Per evitare crash con azioni verso il controllo, avvio quello di debug
+               m_nNCType = 0
+               Me.m_CN = New CN_Debug
+               m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Red")
+            Else
+               ' ATTENZIONE: durante l'inizializzazione della classe il vettore che contiene tutti gli indirizzi di memoria non è caricato
+               m_CN.b_axis_events_enable = True
+               m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_DarkGray")
+            End If
       End Select
 
       ' Assegno riferimento al CN alle diverse pagine
@@ -464,6 +511,7 @@ Public Class CNCommunication
          m_MachineStatus.DisplayPositionDelta()
       End If
 
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
       If m_CN.b_feed_changed Then
          m_CN.b_feed_changed = False
          m_MachineStatus.DisplayFeed()
@@ -490,12 +538,14 @@ Public Class CNCommunication
          'FrmMain.LblToolRad.Text = cn.Tools(0).radius.ToString
          'FrmMain.LblToolComp.Text = cn.Tools(0).comp_num.ToString
       End If
+      ' ----- FINE : lettura diretta di specifiche vaiabili -----
 
       Select Case m_nNCType
          Case 1
             If m_CN.read_active_mode() <> m_nCurrMode Then
                m_nCurrMode = m_CN.read_active_mode()
                m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+               m_CN.nMachineMode = m_nCurrMode
             End If
          Case 2
             If m_CN.nMachineMode <> m_nCurrMode Then
@@ -530,6 +580,7 @@ Public Class CNCommunication
          'End If
       End If
 
+      ' QUESTE VARIABILI NON SONO LETTE IN QUANTO NON SONO STATE CARICATE → vedere come esempio il NUM che assegna queste variabili
       ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
       If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
          If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
@@ -568,8 +619,14 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.CloseAllChanged(m_CN.bCloseAllState)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open123Changed(m_CN.bOpen123State)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open456Changed(m_CN.bOpen456State)
-            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
-            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            ' in assenza della configurazione delle variabili Close123 e Close456
+            If Not String.IsNullOrEmpty(m_CN.m_szCnDataVar(CN_generico.CnData.Close123State)) Then
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(Not m_CN.bOpen123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(Not m_CN.bOpen456State)
+            End If
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BlowChanged(m_CN.bBlowState)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOnChanged(m_CN.bVacuumOn)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOffChanged(m_CN.bVacuumOff)
@@ -581,6 +638,180 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.ZCJogChanged(m_CN.bZCJog)
                m_MainWindow.m_DirectCutPageUC.ZBJogChanged(m_CN.bZBCJog)
                m_MainWindow.m_DirectCutPageUC.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
+            End If
+         Else
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.LaserTracStateChanged(m_CN.bLaserTracState)
+            If m_CN.Is_G24_active() Then
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(False)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(True)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(False)
+            End If
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.HomeStateChanged(m_CN.bHomeState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
+
+            ' Nuovi bottoni (uso joystick) per Area4
+            If m_IsNewConsole Then
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.XYJogChanged(m_CN.bXYJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.m_MachineButtons.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
+            End If
+
+         End If
+      End If
+
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.RawPart Then
+         m_MainWindow.m_RawPartPage.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+      End If
+
+      ' Nuove bottoni (Power Macchina)
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         If m_IsNewConsole Then
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+         End If
+         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+      End If
+
+
+
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.WorkInProgress Then
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.LaserStateChanged(m_CN.bLaserState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.LaserTracStateChanged(m_CN.bLaserTracState)
+         If m_CN.Is_G24_active() Then
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ThreeAxisStateChanged(False)
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.FiveAxisStateChanged(True)
+         Else
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
+            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.FiveAxisStateChanged(False)
+         End If
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
+      End If
+
+   End Sub
+
+   Private Sub RefreshAxesFANUC()
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
+      ' avvio lettura variabili da CN
+      m_CN.Geppo()
+      ' notifico valori all'interfaccia
+      m_MachineStatus.DisplayPosition()
+      m_MachineStatus.DisplayPositionDelta()
+      m_MachineStatus.DisplayFeed()
+      m_MachineStatus.DisplaySpeed()
+      m_MachineStatus.DisplayPower()
+   End Sub
+
+   Private Sub RefreshFANUC()
+      ' Copia della funzione Refresh
+
+      ' ----- INIZIO: lettura diretta di specifiche vaiabili -----
+      '' avvio lettura variabili da CN
+      'm_CN.Geppo()
+      '' notifico valori all'interfaccia
+      'm_MachineStatus.DisplayPosition()
+      'm_MachineStatus.DisplayPositionDelta()
+      'm_MachineStatus.DisplayFeed()
+      'm_MachineStatus.DisplaySpeed()
+      'm_MachineStatus.DisplayPower()
+      ' eventualmente carico messaggi di errore
+      ErrorList.Clear()
+      If m_CN.b_NC_error Then
+         ErrorList.Clear()
+         SyncLock m_CN
+            For Each Item As String In m_CN.sz_NC_error_messages
+               ErrorList.Add(Item)
+            Next
+         End SyncLock
+      End If
+      m_AlarmsPage.NcError()
+      ' ----- FINE  : lettura diretta di specifiche vaiabili -----
+
+      If m_CN.read_active_mode() <> CShort(m_nCurrMode) Then
+         m_nCurrMode = CInt(m_CN.read_active_mode())
+         m_MachineStatus.DisplayActiveMode(m_nCurrMode)
+         m_CN.nMachineMode = m_nCurrMode
+      End If
+
+      ' QUESTE VARIABILI NON SONO LETTE IN QUANTO NON SONO STATE CARICATE → vedere come esempio il NUM che assegna queste variabili
+      ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
+         If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.SpindleStateChanged(m_CN.bSpindleState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LaserStateChanged(m_CN.bLaserState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LaserTracStateChanged(m_CN.bLaserTracState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.CoolantStateChanged(m_CN.bCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.InternalCoolantStateChanged(m_CN.bInternalCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ExternCoolantStateChanged(m_CN.bExternCoolantState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.CBAxesStateChanged(m_CN.bCBAxesState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.AirBlowStateChanged(m_CN.bAirBlowState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.HomeStateChanged(m_CN.bHomeState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.TableDownChanged(m_CN.bTableDownState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.DoorClosedChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LimitZChanged(m_CN.bLimitZState)
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.FiveAxisStateChanged(m_CN.Is_G24_active())
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ParkingStateChanged(m_CN.bParkingState)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ZoneStateChanged(m_CN.nEnableZone)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.PcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumUpChanged(m_CN.bVacuumUp)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumDownChanged(m_CN.bVacuumDown)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2UpChanged(m_CN.bVacuum2Up)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2DownChanged(m_CN.bVacuum2Down)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum0Changed(m_CN.bVacuum0)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum90Changed(m_CN.bVacuum90)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum1Changed(m_CN.bVacuum1State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2Changed(m_CN.bVacuum2State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum3Changed(m_CN.bVacuum3State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum4Changed(m_CN.bVacuum4State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum5Changed(m_CN.bVacuum5State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum6Changed(m_CN.bVacuum6State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum135Changed(m_CN.bVacuum135State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum246Changed(m_CN.bVacuum246State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.OpenAllChanged(m_CN.bOpenAllState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.CloseAllChanged(m_CN.bCloseAllState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open123Changed(m_CN.bOpen123State)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Open456Changed(m_CN.bOpen456State)
+            ' in assenza della configurazione delle variabili Close123 e Close456
+            If Not String.IsNullOrEmpty(m_CN.m_szCnDataVar(CN_generico.CnData.Close123State)) Then
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(m_CN.bClose123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(m_CN.bClose456State)
+            Else
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close123Changed(Not m_CN.bOpen123State)
+               m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Close456Changed(Not m_CN.bOpen456State)
+            End If
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BlowChanged(m_CN.bBlowState)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOnChanged(m_CN.bVacuumOn)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumOffChanged(m_CN.bVacuumOff)
+            m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.BypassChanged(m_CN.bBypassState)
+
+            ' Nuovi bottoni (uso joystick)
+            If m_IsNewConsole Then
+               m_MainWindow.m_DirectCutPageUC.XYJogChanged(m_CN.bXYJog)
+               m_MainWindow.m_DirectCutPageUC.ZCJogChanged(m_CN.bZCJog)
+               m_MainWindow.m_DirectCutPageUC.ZBJogChanged(m_CN.bZBCJog)
+               m_MainWindow.m_DirectCutPageUC.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
             End If
          Else
             m_MainWindow.m_DirectCutPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
@@ -607,6 +838,7 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ZJogChanged(m_CN.bZCJog)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.BCJogChanged(m_CN.bZBCJog)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.RemoteChanged(m_CN.bRemote)
+               m_MainWindow.m_DirectCutPageUC.ParkingStateChanged(m_CN.bParkingState)
             End If
 
          End If
@@ -617,11 +849,17 @@ Public Class CNCommunication
       End If
 
       ' Nuove bottoni (Power Macchina)
-      If m_IsNewConsole AndAlso m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
-         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
-         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+      If m_MainWindow.m_ActivePage = MainWindow.Pages.Machine Then
+         If m_IsNewConsole Then
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerONChanged(m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.PowerOFFChanged(Not m_CN.bPowerON)
+            m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
+         End If
+         m_MainWindow.m_MachinePageUC.m_MachineCNPageUC.CncModeChange(m_CN.nMachineMode)
       End If
 
+
+
       If m_MainWindow.m_ActivePage = MainWindow.Pages.WorkInProgress Then
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.SpindleStateChanged(m_CN.bSpindleState)
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.CoolantStateChanged(m_CN.bCoolantState OrElse m_CN.bInternalCoolantState OrElse m_CN.bExternCoolantState)
@@ -904,28 +1142,84 @@ Public Class CNCommunication
          End If
          ' Se richiesta successiva attivazione, faccio reset
          If bActivate Then
+            EgtOutLog("Call function: DGeneralFunctions_Reset")
+            TimeSpanInit()
             m_CN.DGeneralFunctions_Reset()
+            EgtOutLog(TimeSpanEnd())
          End If
          ' Attesa opportuna
          System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nResetSendDelay)
          If m_nNCType = 1 Then
             ' Cancellazione eventuale file già presente con lo stesso nome (ignoro eventuale errore)
+            EgtOutLog("Delete_NC_prog(sNumProg)")
+            TimeSpanInit()
             m_CN.Delete_NC_prog(sNumProg)
+            EgtOutLog(TimeSpanEnd())
             ' Attesa opportuna
             System.Threading.Thread.Sleep(100)
+         ElseIf m_nNCType = 4 Then
+            ' FANUC: imposto modalità EDIT 
+            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(1) = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
          End If
+         EgtOutLog("Download_NC_prog(sCncPath, sNumProg)")
+         ' -------------- START DOWNLOAD -------------- 
+         TimeSpanInit()
          bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
          ' Attesa opportuna
          System.Threading.Thread.Sleep(100)
+         ' FANUC: genero un file 901 vuoto da aspedire, attivare; poi rispedisco il file 900
+         If m_nNCType = 4 And Not bOk Then
+            bOk = True
+            Dim sCncPath1 As String = m_MainWindow.GetCncDir() & "\PlaceHolder" & m_MainWindow.m_CurrentMachine.sIsoFileExt
+            Dim fs As FileStream = File.Create(sCncPath1)
+            ' Add text to the file.
+            Dim info As Byte() = New UTF8Encoding(True).GetBytes(vbLf & "(PlaceHolder)")
+            fs.Write(info, 0, info.Length)
+            fs.Close()
+            bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath1, "901") = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+            If bActivate Then
+               bOk = bOk AndAlso (m_CN.ActivateProgram("901") = 0)
+               ' Attesa opportuna
+               System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+            End If
+            ' riprovo ad eseguire il programma 900
+            bOk = True
+            bOk = bOk AndAlso (m_CN.Download_NC_prog(sCncPath, sNumProg) = 0)
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(m_MainWindow.m_CurrentMachine.nThreadSleep)
+         End If
+         EgtOutLog("Nc Type : " & m_nNCType.ToString)
+         ' AXIUM (NUM OLD): se DripFeed non esegluo attivazione programma)
+         If m_nNCType = 1 AndAlso m_CN.bIsDripFeed Then
+            ' eventauli cambi di stato sono trattati all'interno della funzione DownLoad_NC_prog
+            Return True
+         End If
+         EgtOutLog(TimeSpanEnd())
+         ' --------------  END  DOWNLOAD -------------- 
+         ' -------------- START ACTIVATE -------------- 
          ' Se richiesta attivazione
          If bActivate Then
             ' Attivazione programma
+            EgtOutLog("ActivateProgram(nNumProg)")
+            TimeSpanInit()
             bOk = bOk AndAlso (m_CN.ActivateProgram(nNumProg) = 0)
+            EgtOutLog(TimeSpanEnd())
+            ' Attesa opportuna
+            System.Threading.Thread.Sleep(100)
+            ' Attivo la modalità AUTO prima per preparar il cyclo start
+            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(0) = 0)
             ' Attesa opportuna
             System.Threading.Thread.Sleep(100)
             ' Modalità automatica
-            bOk = bOk AndAlso (m_CN.DGeneralFunctions_WriteCncMode(0) = 0)
+            EgtOutLog("DGeneralFunctions_WriteCncMode(0)")
+            TimeSpanInit()
+            EgtOutLog(TimeSpanEnd())
          End If
+         ' --------------  END  ACTIVATE -------------- 
          ' Messaggio con risultato
          If bOk Then
             m_CurrProjPage.SetInfoMessage(EgtMsg(90317))        'Programma CN trasmesso con successo

NcComm/CN_generico.vb

@@ -8,7 +8,7 @@ Public MustInherit Class CN_generico
    Public Const MAX_VAR As Short = 100
    Public Const MAX_VALUES As Short = 9           ' Max. index to read the data from the FXServer array
    Public Const MAX_TOOLS As Short = 100
-   Public Const NUM_DATA = 55                     ' Numero di dati del CN (Speed,Feed,...)
+   Public Const NUM_DATA = 56                     ' Numero di dati del CN (Speed,Feed,...)
 
    Public m_NewVariable As Boolean = False        ' per scrittura delle vairbaili Apllication del PLC
 
@@ -70,8 +70,18 @@ Public MustInherit Class CN_generico
       Parking = 52
       EnableZone = 53
       EnablePC = 54
+
+      nAxes = 55
    End Enum
 
+   Public Enum Type As Short
+      TBoolean = 0
+      TInteger = 1
+      TLong = 2
+      TDouble = 3
+      TString = 4
+
+   End Enum
 #End Region
 
 #Region " Struct"
@@ -218,10 +228,27 @@ Public MustInherit Class CN_generico
    Public bRemote As Boolean
    ' Nuovi di bottoni -------------------------------------------
 
+   ' solo per NumOld
+   Public bIsDripFeed As Boolean = False
+
+   ' usato nel FANUC per leggere lo stato macchina se 5 assi attivo
+   Public b5AxesActive As Boolean
+
    Public nMachineMode As Integer
 
    Public m_szCnDataVar(NUM_DATA - 1) As String
-
+   '
+   ' nuovi dal 29-III-2023 per Fanuc
+   '
+   Public n_Base_addr_int_vars As Integer = 59800
+   Public n_Base_addr_byte_for_bits_vars As Integer = 59820
+   Public n_num_var_int_to_read As Short = 10
+   Public n_num_var_byte_for_bits_to_read As Short = 30
+   Public s_addr_set_nc_mode As String = "D59825"
+   Public s_addr_feedhold As String = "D59850.6"
+   '
+   ' Eventi
+   '
    Public Event NewPositionData(ByVal sender As Object)
    Public Event NewPosDeltaData(ByVal sender As Object)
    Public Event NewVarChanged(ByVal sender As Object)
@@ -294,8 +321,8 @@ Public MustInherit Class CN_generico
 
    Public MustOverride Function DTool_set_read_range(n_start As Short, n_stop As Short) As Short
 
-   Public MustOverride Function DTool_write_tool(n_tool_number As Short, Length_X As Double, Radius As Double, TipRadius_Z As Double, _
-                                    DLength_X As Double, DTipRadius_Z As Double, _
+   Public MustOverride Function DTool_write_tool(n_tool_number As Short, Length_X As Double, Radius As Double, TipRadius_Z As Double,
+                                    DLength_X As Double, DTipRadius_Z As Double,
                                     nDirection As Short, nType As Short, nH As Integer) As Short
 
    Public Overridable Function SetProgramMainOrSub(bMain As Boolean) As Boolean
@@ -341,4 +368,36 @@ Public MustInherit Class CN_generico
 
 #End Region
 
+#Region " Nuovi metodi pubblici"
+
+   Public Overridable Function NC_read_var_short(VarAddr As String, ByRef value As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_read_var_short_range(VarStartAddr As String, VarEndAddr As String, ByRef values() As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_write_var_short(VarAddr As String, ByRef value As Short) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_read_var_bit(VarAddr As String, ByRef value As Boolean) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_write_var_bit(VarAddr As String, ByRef value As Boolean) As Boolean
+      Return False
+   End Function
+
+   Public Overridable Function NC_pulse_bit(VarAddr As String) As Boolean
+      Return False
+   End Function
+   Public Overridable Function Geppo() As Boolean
+      Return False
+   End Function
+
+#End Region
+
+
 End Class

OmagCUT.vbproj

@@ -122,12 +122,13 @@
       <SpecificVersion>False</SpecificVersion>
       <HintPath>..\..\EgtProg\DllD32\EgtUILib.dll</HintPath>
     </Reference>
-    <Reference Include="EgtWPFLib, Version=2.1.7.1, Culture=neutral, processorArchitecture=MSIL">
+    <Reference Include="EgtWPFLib, Version=2.5.2.2, Culture=neutral, processorArchitecture=MSIL">
       <SpecificVersion>False</SpecificVersion>
       <HintPath>..\..\EgtProg\Dll32\EgtWPFLib.dll</HintPath>
     </Reference>
-    <Reference Include="EgtWPFLib5">
-      <HintPath>..\..\EgtProg\OmagCUT\EgtWPFLib5.dll</HintPath>
+    <Reference Include="EgtWPFLib5, Version=2.5.2.2, Culture=neutral, processorArchitecture=MSIL">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\EgtProg\Dll32\EgtWPFLib5.dll</HintPath>
     </Reference>
     <Reference Include="Interop.FXLib">
       <HintPath>..\..\EgtProg\OmagCUT\Interop.FXLib.dll</HintPath>
@@ -177,6 +178,12 @@
       <DependentUpon>SelectPartFromFamilyWD.xaml</DependentUpon>
     </Compile>
     <Compile Include="CAM\CamPolishing.vb" />
+    <Compile Include="DirectCuts\ControlsDirectCutUC.xaml.vb">
+      <DependentUpon>ControlsDirectCutUC.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="DirectCuts\ControlsDirectCutUC1.xaml.vb">
+      <DependentUpon>ControlsDirectCutUC1.xaml</DependentUpon>
+    </Compile>
     <Compile Include="DirectCuts\Polishing.xaml.vb">
       <DependentUpon>Polishing.xaml</DependentUpon>
     </Compile>
@@ -186,6 +193,9 @@
     <Compile Include="DirectCuts\SingleDrillUC.xaml.vb">
       <DependentUpon>SingleDrillUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="DirectCuts\SquaringUC.xaml.vb">
+      <DependentUpon>SquaringUC.xaml</DependentUpon>
+    </Compile>
     <Compile Include="DrawImport\AlzFrontUC.xaml.vb">
       <DependentUpon>AlzFrontUC.xaml</DependentUpon>
     </Compile>
@@ -217,6 +227,9 @@
     <Compile Include="Machine\WaterJetPageUC.xaml.vb">
       <DependentUpon>WaterJetPageUC.xaml</DependentUpon>
     </Compile>
+    <Compile Include="NcComm\fwlib32.vb" />
+    <Compile Include="NcComm\M_Fanuc.vb" />
+    <Compile Include="NcComm\M_Fanuc_hi.vb" />
     <Compile Include="Project\AddToDataBaseUC.xaml.vb">
       <DependentUpon>AddToDataBaseUC.xaml</DependentUpon>
     </Compile>
@@ -232,6 +245,9 @@
     <Compile Include="Project\CicloStartWD.xaml.vb">
       <DependentUpon>CicloStartWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="RawPhoto\OtherRefTabWD.xaml.vb">
+      <DependentUpon>OtherRefTabWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="RawPhoto\SlabIdWD.xaml.vb">
       <DependentUpon>SlabIdWD.xaml</DependentUpon>
     </Compile>
@@ -429,6 +445,14 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="DirectCuts\ControlsDirectCutUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="DirectCuts\ControlsDirectCutUC1.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DirectCuts\Polishing.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -441,6 +465,10 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="DirectCuts\SquaringUC.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DrawImport\AlzFrontUC.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
@@ -494,6 +522,10 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="RawPhoto\OtherRefTabWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="RawPhoto\SlabIdWD.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -876,7 +908,7 @@
     <Resource Include="Resources\MachineStatusImage\Single.png" />
   </ItemGroup>
   <ItemGroup>
-    <Resource Include="Resources\ToolChangerPos.png" />
+    <Resource Include="Resources\ToolChangerPos_OLD.png" />
   </ItemGroup>
   <ItemGroup>
     <Resource Include="Resources\Manual.png" />
@@ -1291,10 +1323,22 @@
     <Resource Include="Resources\NewIcons\START-WJ.png" />
   </ItemGroup>
   <ItemGroup>
-    <Resource Include="Resources\ImportPageListBoxImages\4.png" />
+    <Resource Include="Resources\NewIcons\Ponticelli.png" />
   </ItemGroup>
   <ItemGroup>
-    <Resource Include="Resources\ImportPageListBoxImages\5.png" />
+    <Resource Include="Resources\NewIcons\Ponticelli_delete.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Parking.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Quality.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\ToolChangerPos.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\RefTab.png" />
   </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>

OmagCUTDarkDictionary.xaml

@@ -32,6 +32,7 @@
     <BitmapImage x:Key="AlignPiecesImg" UriSource="Resources/NewIcons/ruota-oggetto-inclinato.png"></BitmapImage>
     <BitmapImage x:Key="BarCodeImg" UriSource="Resources/NewIcons/BarCode.png"></BitmapImage>
     <BitmapImage x:Key="SlabIdImg" UriSource="Resources/NewIcons/SlabId.png"></BitmapImage>
+    <BitmapImage x:Key="RefTabImg" UriSource="Resources/NewIcons/RefTab.png"></BitmapImage>
     <BitmapImage x:Key="BottomLeftImg" UriSource="Resources/NewIcons/1-BottomLeft.png"></BitmapImage>
     <BitmapImage x:Key="BottomRightImg" UriSource="Resources/NewIcons/2-BottomRight.png"></BitmapImage>
     <BitmapImage x:Key="PartRotOnImg" UriSource="Resources/NewIcons/PartRotOn.png"></BitmapImage>

OmagCUTDictionary.xaml

@@ -102,6 +102,7 @@
     <BitmapImage x:Key="AlignPiecesImg" UriSource="Resources/AlignPieces.png"></BitmapImage>
     <BitmapImage x:Key="BarCodeImg" UriSource="Resources/BarCode.png"></BitmapImage>
     <BitmapImage x:Key="SlabIdImg" UriSource="Resources/SlabId.png"></BitmapImage>
+    <BitmapImage x:Key="RefTabImg" UriSource="Resources/NewIcons/RefTab.png"></BitmapImage>
     <BitmapImage x:Key="BottomLeftImg" UriSource="Resources/BottomLeft.png"></BitmapImage>
     <BitmapImage x:Key="BottomRightImg" UriSource="Resources/BottomRight.png"></BitmapImage>
     <BitmapImage x:Key="PartRotOnImg" UriSource="Resources/PartRotOn.png"></BitmapImage>
@@ -208,6 +209,7 @@
     <BitmapImage x:Key="XYJogImg" UriSource="Resources/NewIcons/XYJog.png"></BitmapImage>
     <BitmapImage x:Key="ZCJogImg" UriSource="Resources/NewIcons/ZCJog.png"></BitmapImage>
     <BitmapImage x:Key="ZBJogImg" UriSource="Resources/NewIcons/ZBJog.png"></BitmapImage>
+    <BitmapImage x:Key="ParkingImg" UriSource="Resources/NewIcons/Parking.png"></BitmapImage>
 
 
     <!--Frame-->
@@ -218,6 +220,9 @@
     <!--Machinig-->
     <BitmapImage x:Key="Allunga-AccorciaImg" UriSource="Resources/NewIcons/Allunga-o-accorcia.png"></BitmapImage>
     <BitmapImage x:Key="Inizio-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Inizio-allunga-o-accorcia.png"></BitmapImage>
+    <BitmapImage x:Key="PonticelliWJImg" UriSource="Resources/NewIcons/Ponticelli.png"></BitmapImage>
+    <BitmapImage x:Key="PonticelliDeleteWJImg" UriSource="Resources/NewIcons/Ponticelli_delete.png"></BitmapImage>
+    <BitmapImage x:Key="QualityWJImg" UriSource="Resources/NewIcons/Quality.png"></BitmapImage>
     <BitmapImage x:Key="Fine-Allunga-AccorciaImg" UriSource="Resources/NewIcons/Fine-allunga-o-accorcia.png"></BitmapImage>
     <BitmapImage x:Key="ON_OFF-singolo-taglioImg" UriSource="Resources/NewIcons/ON_OFF-singolo-taglio.png"></BitmapImage>
     <BitmapImage x:Key="Tutti-ONImg" UriSource="Resources/NewIcons/Tutti-ON.png"></BitmapImage>
@@ -1206,6 +1211,7 @@
 
    <Style x:Key="OmagCut_CalculatorTextBox" TargetType="{x:Type EgtWPFLib:EgtTextBox}" BasedOn="{StaticResource OmagCut_TextBox}">
       <Setter Property="Keyboard" Value="Calculator"/>
+      <Setter Property="IsLength" Value="True"/>
       <Setter Property="KeyboardDimension" Value="300"/>
    </Style>
 

Options/OptionsPageUC.xaml

@@ -55,23 +55,43 @@
 
       </GroupBox>
 
+      <!--UNITA' DI MISURA-->
       <GroupBox Name="UnitsOfMeasureGpBx"
                 Grid.Column="1"
                 Grid.RowSpan="3"
                 Style="{DynamicResource OmagCut_GroupBox}">
-         <Grid >
+         <Grid Name ="UnitGrid">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="4*"/>
+               <ColumnDefinition Width="3.2*"/>
+               <ColumnDefinition Width="1.8*"/>
                <ColumnDefinition Width="0.5*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
                <RowDefinition Height="0.25*"/>
                <RowDefinition Height="0.5*"/>
                <RowDefinition Height="0.25*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.25*"/>
             </Grid.RowDefinitions>
 
-            <ComboBox Name="UnitsOfMeasureCmBx" Grid.Column="1" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}">
+            <ComboBox Name="UnitsOfMeasureCmBx" Grid.Column="1" Grid.Row="1"  Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>
+
+            <ComboBox Name="FractionPatternCmBx" Grid.Column="1" Grid.Row="3" Style="{StaticResource OmagCut_ComboBox}">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>
+
+            <ComboBox Name="PrecisionCmBx" Grid.Column="2" Grid.Row="3" Style="{StaticResource OmagCut_ComboBox}">
                <ComboBox.ItemTemplate>
                   <DataTemplate>
                      <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
@@ -80,32 +100,32 @@
             </ComboBox>
 
          </Grid>
+      </GroupBox>
+
+
+      <GroupBox Name="TextColorGpBx"
+                Grid.Column="2" Grid.RowSpan="3" Grid.ColumnSpan="1"
+                Style="{DynamicResource OmagCut_GroupBox}">
+         <Grid>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.25*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.25*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <Button Name="TextColorBtn"
+                          Grid.Row="1" Grid.Column="1"
+                          Style="{StaticResource OmagCut_Button}" />
+         </Grid>
 
       </GroupBox>
 
-        <GroupBox Name="TextColorGpBx"
-                Grid.Column="2" Grid.RowSpan="3" Grid.ColumnSpan="1"
-                Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid>
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="0.25*"/>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="0.25*"/>
-                </Grid.ColumnDefinitions>
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="1*"/>
-                    <RowDefinition Height="0.5*"/>
-                </Grid.RowDefinitions>
-
-                <Button Name="TextColorBtn"
-                          Grid.Row="1" Grid.Column="1"
-                          Style="{StaticResource OmagCut_Button}" />
-            </Grid>
-
-        </GroupBox>
-
-        <GroupBox Name="FastGridGpBx"
+      <GroupBox Name="FastGridGpBx"
                 Grid.Column="1" Grid.Row="4" Grid.ColumnSpan="2"
                 Style="{DynamicResource OmagCut_GroupBox}">
          <Grid>
@@ -133,458 +153,458 @@
 
       </GroupBox>
 
-       
-       
-        <GroupBox Name="SlabGpBx" Grid.RowSpan="1" 
+
+
+      <GroupBox Name="SlabGpBx" Grid.RowSpan="1" 
                   Grid.Column="1" Grid.Row="3" Grid.ColumnSpan="2"
                   Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid>
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="2*"/>
-                    <ColumnDefinition Width="2*"/>
-                </Grid.ColumnDefinitions>
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                </Grid.RowDefinitions>
+         <Grid>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
 
-                <TextBlock Name="SlabLayerMsgTxBl" Grid.Column="0" Grid.Row="0" 
+            <TextBlock Name="SlabLayerMsgTxBl" Grid.Column="0" Grid.Row="0" 
                Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
 
-                <TextBlock Name="PartsLayerMsgTxBl" Grid.Column="0" Grid.Row="1" 
+            <TextBlock Name="PartsLayerMsgTxBl" Grid.Column="0" Grid.Row="1" 
                Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
 
-                <TextBlock Name="ScrapLayerMsgTxBl" Grid.Column="0" Grid.Row="2" 
+            <TextBlock Name="ScrapLayerMsgTxBl" Grid.Column="0" Grid.Row="2" 
                Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
 
-                <TextBlock Name="StdThickMsgTxBl" Grid.Column="0" Grid.Row="3" 
+            <TextBlock Name="StdThickMsgTxBl" Grid.Column="0" Grid.Row="3" 
                Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
 
-                <EgtWPFLib:EgtTextBox Name="SlabLayerMsgTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
+            <EgtWPFLib:EgtTextBox Name="SlabLayerMsgTxBx" Grid.Column="1" Grid.Row="0" Margin="10,0,10,0"
                      Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}" />
 
-                <EgtWPFLib:EgtTextBox Name="PartsLayerMsgTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
+            <EgtWPFLib:EgtTextBox Name="PartsLayerMsgTxBx" Grid.Column="1" Grid.Row="1" Margin="10,0,10,0"
                      Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}" />
 
-                <EgtWPFLib:EgtTextBox Name="ScrapLayerMsgTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
+            <EgtWPFLib:EgtTextBox Name="ScrapLayerMsgTxBx" Grid.Column="1" Grid.Row="2" Margin="10,0,10,0"
                      Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}" />
 
-                <EgtWPFLib:EgtTextBox Name="StdThickMsgTxBx" Grid.Column="1" Grid.Row="3" Margin="10,0,10,0"
+            <EgtWPFLib:EgtTextBox Name="StdThickMsgTxBx" Grid.Column="1" Grid.Row="3" Margin="10,0,10,0"
                      Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-            </Grid>
+         </Grid>
 
-        </GroupBox>
+      </GroupBox>
 
-        <!--Incilinazione da colore-->
-        <GroupBox Name="ColorToSideAngGpBx" Grid.RowSpan="3" 
+      <!--Incilinazione da colore-->
+      <GroupBox Name="ColorToSideAngGpBx" Grid.RowSpan="3" 
                   Grid.Column="0" Grid.Row="3"
                   Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid>
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="0*"/>
-                    <ColumnDefinition Width="2*"/>
-                    <ColumnDefinition Width="0"/>
-                    <ColumnDefinition Width="2*"/>
-                </Grid.ColumnDefinitions>
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="0.75*"/>
-                    <RowDefinition Height="0.25*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                </Grid.RowDefinitions>
+         <Grid>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0*"/>
+               <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="0"/>
+               <ColumnDefinition Width="2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.75*"/>
+               <RowDefinition Height="0.25*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
 
-                <Grid Grid.Row="0" Grid.ColumnSpan="7">
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="1*"/>
-                        <ColumnDefinition Width="1.5*"/>
-                        <ColumnDefinition Width="0.5*"/>
-                        <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="1.5*" />
-                    </Grid.ColumnDefinitions>
-                    <Grid.RowDefinitions>
-                        <RowDefinition Height="0.75*"/>
-                    </Grid.RowDefinitions>
+            <Grid Grid.Row="0" Grid.ColumnSpan="7">
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="1.5*"/>
+                  <ColumnDefinition Width="0.5*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="1.5*" />
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="0.75*"/>
+               </Grid.RowDefinitions>
 
-                    <CheckBox Name="CTSAboxEnableChBx" Grid.Column="0" Grid.Row="0"
+               <CheckBox Name="CTSAboxEnableChBx" Grid.Column="0" Grid.Row="0"
                         Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                    <TextBlock Name="CTSAboxEnableMsgTxBl" Grid.Column="1" Grid.Row="0"
+               <TextBlock Name="CTSAboxEnableMsgTxBl" Grid.Column="1" Grid.Row="0"
                         Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left" />
 
-                    <TextBlock Name="ToleranceMsgTxBl" Grid.Column="3" Grid.Row="0"
+               <TextBlock Name="ToleranceMsgTxBl" Grid.Column="3" Grid.Row="0"
                         Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                    <EgtWPFLib:EgtTextBox Name="ToleranceMsgTxBx" Grid.Column="4" Grid.Row="0" Margin="10,0,10,0"
+               <EgtWPFLib:EgtTextBox Name="ToleranceMsgTxBx" Grid.Column="4" Grid.Row="0" Margin="10,0,10,0" IsLength="False"
                         Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
-                </Grid>
-                
-                <TextBlock Name="TalloneMsgTxBl" Grid.Column="5" Grid.Row="1" Grid.ColumnSpan="2"
-                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <TextBlock Name="InclinazioneMsgTxBl" Grid.Column="3" Grid.Row="1" 
-                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-              
-                    
-                <CheckBox Name="CTSA1EnableChBx" Grid.Column="0" Grid.Row="2"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA1Btn" Grid.Row="2" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA1TalloneTxBx" Grid.Column="5" Grid.Row="2" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA1InclinazioneTxBx" Grid.Column="3" Grid.Row="2" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA2EnableChBx" Grid.Column="0" Grid.Row="3" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA2Btn" Grid.Row="3" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA2TalloneTxBx" Grid.Column="5" Grid.Row="3" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA2InclinazioneTxBx" Grid.Column="3" Grid.Row="3" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA3EnableChBx" Grid.Column="0" Grid.Row="4" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA3Btn" Grid.Row="4" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA3TalloneTxBx" Grid.Column="5" Grid.Row="4" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA3InclinazioneTxBx" Grid.Column="3" Grid.Row="4" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA4EnableChBx" Grid.Column="0" Grid.Row="5" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA4Btn" Grid.Row="5" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA4TalloneMsgTxBl" Grid.Column="2" Grid.Row="5" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA4TalloneTxBx" Grid.Column="5" Grid.Row="5" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA4InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="5" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA4InclinazioneTxBx" Grid.Column="3" Grid.Row="5" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA5EnableChBx" Grid.Column="0" Grid.Row="6" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA5Btn" Grid.Row="6" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA5TalloneMsgTxBl" Grid.Column="2" Grid.Row="6" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA5TalloneTxBx" Grid.Column="5" Grid.Row="6" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA5InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="6" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA5InclinazioneTxBx" Grid.Column="3" Grid.Row="6" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA6EnableChBx" Grid.Column="0" Grid.Row="7" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA6Btn" Grid.Row="7" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA6TalloneMsgTxBl" Grid.Column="2" Grid.Row="7" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA6TalloneTxBx" Grid.Column="5" Grid.Row="7" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA6InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="7" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA6InclinazioneTxBx" Grid.Column="3" Grid.Row="7" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA7EnableChBx" Grid.Column="0" Grid.Row="8" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA7Btn" Grid.Row="8" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA7TalloneMsgTxBl" Grid.Column="2" Grid.Row="8" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA7TalloneTxBx" Grid.Column="5" Grid.Row="8" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA7InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="8" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA7InclinazioneTxBx" Grid.Column="3" Grid.Row="8" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA8EnableChBx" Grid.Column="0" Grid.Row="9" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA8Btn" Grid.Row="9" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA8TalloneMsgTxBl" Grid.Column="2" Grid.Row="9" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA8TalloneTxBx" Grid.Column="5" Grid.Row="9" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA8InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="9" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA8InclinazioneTxBx" Grid.Column="3" Grid.Row="9" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA9EnableChBx" Grid.Column="0" Grid.Row="10" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA9Btn" Grid.Row="10" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA9TalloneMsgTxBl" Grid.Column="2" Grid.Row="10" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA9TalloneTxBx" Grid.Column="5" Grid.Row="10" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA9InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="10" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA9InclinazioneTxBx" Grid.Column="3" Grid.Row="10" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTSA10EnableChBx" Grid.Column="0" Grid.Row="11" 
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTSA10Btn" Grid.Row="11" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <TextBlock Name="CTSA10TalloneMsgTxBl" Grid.Column="2" Grid.Row="11" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA10TalloneTxBx" Grid.Column="5" Grid.Row="11" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <TextBlock Name="CTSA10InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="11" 
-                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                <EgtWPFLib:EgtTextBox Name="CTSA10InclinazioneTxBx" Grid.Column="3" Grid.Row="11" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
             </Grid>
 
-        </GroupBox>
+            <TextBlock Name="TalloneMsgTxBl" Grid.Column="5" Grid.Row="1" Grid.ColumnSpan="2"
+                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <TextBlock Name="InclinazioneMsgTxBl" Grid.Column="3" Grid.Row="1" 
+                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
 
-        <GroupBox Name="ThemesGpBx"
+
+            <CheckBox Name="CTSA1EnableChBx" Grid.Column="0" Grid.Row="2"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA1Btn" Grid.Row="2" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA1TalloneTxBx" Grid.Column="5" Grid.Row="2" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA1InclinazioneTxBx" Grid.Column="3" Grid.Row="2" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA2EnableChBx" Grid.Column="0" Grid.Row="3" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA2Btn" Grid.Row="3" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA2TalloneTxBx" Grid.Column="5" Grid.Row="3" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA2InclinazioneTxBx" Grid.Column="3" Grid.Row="3" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA3EnableChBx" Grid.Column="0" Grid.Row="4" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA3Btn" Grid.Row="4" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA3TalloneTxBx" Grid.Column="5" Grid.Row="4" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA3InclinazioneTxBx" Grid.Column="3" Grid.Row="4" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA4EnableChBx" Grid.Column="0" Grid.Row="5" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA4Btn" Grid.Row="5" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA4TalloneMsgTxBl" Grid.Column="2" Grid.Row="5" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA4TalloneTxBx" Grid.Column="5" Grid.Row="5" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA4InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="5" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA4InclinazioneTxBx" Grid.Column="3" Grid.Row="5" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA5EnableChBx" Grid.Column="0" Grid.Row="6" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA5Btn" Grid.Row="6" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA5TalloneMsgTxBl" Grid.Column="2" Grid.Row="6" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA5TalloneTxBx" Grid.Column="5" Grid.Row="6" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA5InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="6" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA5InclinazioneTxBx" Grid.Column="3" Grid.Row="6" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA6EnableChBx" Grid.Column="0" Grid.Row="7" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA6Btn" Grid.Row="7" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA6TalloneMsgTxBl" Grid.Column="2" Grid.Row="7" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA6TalloneTxBx" Grid.Column="5" Grid.Row="7" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA6InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="7" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA6InclinazioneTxBx" Grid.Column="3" Grid.Row="7" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA7EnableChBx" Grid.Column="0" Grid.Row="8" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA7Btn" Grid.Row="8" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA7TalloneMsgTxBl" Grid.Column="2" Grid.Row="8" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA7TalloneTxBx" Grid.Column="5" Grid.Row="8" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA7InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="8" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA7InclinazioneTxBx" Grid.Column="3" Grid.Row="8" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA8EnableChBx" Grid.Column="0" Grid.Row="9" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA8Btn" Grid.Row="9" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA8TalloneMsgTxBl" Grid.Column="2" Grid.Row="9" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA8TalloneTxBx" Grid.Column="5" Grid.Row="9" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA8InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="9" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA8InclinazioneTxBx" Grid.Column="3" Grid.Row="9" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA9EnableChBx" Grid.Column="0" Grid.Row="10" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA9Btn" Grid.Row="10" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA9TalloneMsgTxBl" Grid.Column="2" Grid.Row="10" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA9TalloneTxBx" Grid.Column="5" Grid.Row="10" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA9InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="10" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA9InclinazioneTxBx" Grid.Column="3" Grid.Row="10" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTSA10EnableChBx" Grid.Column="0" Grid.Row="11" 
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTSA10Btn" Grid.Row="11" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <TextBlock Name="CTSA10TalloneMsgTxBl" Grid.Column="2" Grid.Row="11" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA10TalloneTxBx" Grid.Column="5" Grid.Row="11" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <TextBlock Name="CTSA10InclinazioneMsgTxBl" Grid.Column="4" Grid.Row="11" 
+                     Style="{StaticResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+            <EgtWPFLib:EgtTextBox Name="CTSA10InclinazioneTxBx" Grid.Column="3" Grid.Row="11" Margin="10,0,10,0" IsLength="False"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+         </Grid>
+
+      </GroupBox>
+
+      <GroupBox Name="ThemesGpBx"
                 Grid.Column="1"
                   Grid.Row="5" 
                   Grid.ColumnSpan="2"
                 Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid >
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="0.5*"/>
-                    <ColumnDefinition Width="4*"/>
-                    <ColumnDefinition Width="0.5*"/>
-                </Grid.ColumnDefinitions>
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="0.25*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.25*"/>
-                </Grid.RowDefinitions>
+         <Grid >
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="4*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.25*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.25*"/>
+            </Grid.RowDefinitions>
 
-                <ComboBox Name="ThemesCmBx" Grid.Column="1" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}">
-                    <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                    </ComboBox.ItemTemplate>
-                </ComboBox>
+            <ComboBox Name="ThemesCmBx" Grid.Column="1" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>
 
-            </Grid>
+         </Grid>
 
-        </GroupBox>
+      </GroupBox>
 
-        <!--Affondamneto da Colore-->
-        <GroupBox Name="ColorToEngraveGpBx" Grid.RowSpan="3" 
+      <!--Affondamneto da Colore-->
+      <GroupBox Name="ColorToEngraveGpBx" Grid.RowSpan="3" 
                   Grid.Column="3" Grid.ColumnSpan="2" Grid.Row="3"
                   Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid>
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="1*"/>
-                    <ColumnDefinition Width="0*"/>
-                    <ColumnDefinition Width="2*"/>
-                    <ColumnDefinition Width="0"/>
-                    <ColumnDefinition Width="2*"/>
-                </Grid.ColumnDefinitions>
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="0.75*"/>
-                    <RowDefinition Height="0.25*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.5*"/>
-                </Grid.RowDefinitions>
+         <Grid>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0*"/>
+               <ColumnDefinition Width="2*"/>
+               <ColumnDefinition Width="0"/>
+               <ColumnDefinition Width="2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.75*"/>
+               <RowDefinition Height="0.25*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
 
-                <Grid Grid.Row="0" Grid.ColumnSpan="7">
-                    <Grid.ColumnDefinitions>
-                        <ColumnDefinition Width="1*"/>
-                        <ColumnDefinition Width="1.5*"/>
-                        <ColumnDefinition Width="0.5*"/>
-                        <ColumnDefinition Width="2*"/>
-                        <ColumnDefinition Width="1.5*" />
-                    </Grid.ColumnDefinitions>
-                    <Grid.RowDefinitions>
-                        <RowDefinition Height="0.75*"/>
-                    </Grid.RowDefinitions>
+            <Grid Grid.Row="0" Grid.ColumnSpan="7">
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="1.5*"/>
+                  <ColumnDefinition Width="0.5*"/>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="1.5*" />
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="0.75*"/>
+               </Grid.RowDefinitions>
 
-                    <CheckBox Name="CTEboxEnableChBx" Grid.Column="0" Grid.Row="0"
+               <CheckBox Name="CTEboxEnableChBx" Grid.Column="0" Grid.Row="0"
                         Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                    <TextBlock Name="CTEboxEnableMsgTxBl" Grid.Column="1" Grid.Row="0"
+               <TextBlock Name="CTEboxEnableMsgTxBl" Grid.Column="1" Grid.Row="0"
                         Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" HorizontalAlignment="Left" />
 
-                    <TextBlock Name="ToleranceEMsgTxBl" Grid.Column="3" Grid.Row="0"
+               <TextBlock Name="ToleranceEMsgTxBl" Grid.Column="3" Grid.Row="0"
                         Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-                    <EgtWPFLib:EgtTextBox Name="ToleranceEMsgTxBx" Grid.Column="4" Grid.Row="0" Margin="10,0,10,0"
+               <EgtWPFLib:EgtTextBox Name="ToleranceEMsgTxBx" Grid.Column="4" Grid.Row="0" Margin="10,0,10,0" IsLength="False"
                         Style="{DynamicResource OmagCut_CalculatorTextBox}" />
 
-                </Grid>
-
-                <TextBlock Name="AffondamentoMsgTxBl" Grid.Column="3" Grid.Row="1" Grid.ColumnSpan="2"
-                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-
-                <TextBlock Name="LarghezzaMsgTxBl" Grid.Column="5" Grid.Row="1" Grid.ColumnSpan="2"
-                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
-
-                <CheckBox Name="CTE1EnableChBx" Grid.Column="0" Grid.Row="2"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE1Btn" Grid.Row="2" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE1AffondamentoTxBx" Grid.Column="3" Grid.Row="2" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE1LarghezzaTxBx" Grid.Column="5" Grid.Row="2" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE2EnableChBx" Grid.Column="0" Grid.Row="3"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE2Btn" Grid.Row="3" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE2AffondamentoTxBx" Grid.Column="3" Grid.Row="3" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE2LarghezzaTxBx" Grid.Column="5" Grid.Row="3" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE3EnableChBx" Grid.Column="0" Grid.Row="4"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE3Btn" Grid.Row="4" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE3AffondamentoTxBx" Grid.Column="3" Grid.Row="4" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE3LarghezzaTxBx" Grid.Column="5" Grid.Row="4" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE4EnableChBx" Grid.Column="0" Grid.Row="5"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE4Btn" Grid.Row="5" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE4AffondamentoTxBx" Grid.Column="3" Grid.Row="5" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE4LarghezzaTxBx" Grid.Column="5" Grid.Row="5" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE5EnableChBx" Grid.Column="0" Grid.Row="6"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE5Btn" Grid.Row="6" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE5AffondamentoTxBx" Grid.Column="3" Grid.Row="6" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE5LarghezzaTxBx" Grid.Column="5" Grid.Row="6" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE6EnableChBx" Grid.Column="0" Grid.Row="7"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE6Btn" Grid.Row="7" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE6AffondamentoTxBx" Grid.Column="3" Grid.Row="7" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE6LarghezzaTxBx" Grid.Column="5" Grid.Row="7" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE7EnableChBx" Grid.Column="0" Grid.Row="8"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE7Btn" Grid.Row="8" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE7AffondamentoTxBx" Grid.Column="3" Grid.Row="8" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE7LarghezzaTxBx" Grid.Column="5" Grid.Row="8" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE8EnableChBx" Grid.Column="0" Grid.Row="9"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE8Btn" Grid.Row="9" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE8AffondamentoTxBx" Grid.Column="3" Grid.Row="9" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE8LarghezzaTxBx" Grid.Column="5" Grid.Row="9" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE9EnableChBx" Grid.Column="0" Grid.Row="10"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE9Btn" Grid.Row="10" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE9AffondamentoTxBx" Grid.Column="3" Grid.Row="10" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE9LarghezzaTxBx" Grid.Column="5" Grid.Row="10" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
-                <CheckBox Name="CTE10EnableChBx" Grid.Column="0" Grid.Row="11"
-                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
-                <Button Name="CTE10Btn" Grid.Row="11" Grid.Column="1"
-                     Style="{StaticResource OmagCut_Button}" />
-                <EgtWPFLib:EgtTextBox Name="CTE10AffondamentoTxBx" Grid.Column="3" Grid.Row="11" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-                <EgtWPFLib:EgtTextBox Name="CTE10LarghezzaTxBx" Grid.Column="5" Grid.Row="11" Margin="10,0,10,0"
-                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
-
             </Grid>
 
-        </GroupBox>
+            <TextBlock Name="AffondamentoMsgTxBl" Grid.Column="3" Grid.Row="1" Grid.ColumnSpan="2"
+                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
 
-        <!--Selezione il tipo di avvio del programma-->
-        <GroupBox Name="StartLauncherGpBx"
+            <TextBlock Name="LarghezzaMsgTxBl" Grid.Column="5" Grid.Row="1" Grid.ColumnSpan="2"
+                     Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}" />
+
+            <CheckBox Name="CTE1EnableChBx" Grid.Column="0" Grid.Row="2"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE1Btn" Grid.Row="2" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE1AffondamentoTxBx" Grid.Column="3" Grid.Row="2" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE1LarghezzaTxBx" Grid.Column="5" Grid.Row="2" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE2EnableChBx" Grid.Column="0" Grid.Row="3"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE2Btn" Grid.Row="3" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE2AffondamentoTxBx" Grid.Column="3" Grid.Row="3" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE2LarghezzaTxBx" Grid.Column="5" Grid.Row="3" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE3EnableChBx" Grid.Column="0" Grid.Row="4"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE3Btn" Grid.Row="4" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE3AffondamentoTxBx" Grid.Column="3" Grid.Row="4" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE3LarghezzaTxBx" Grid.Column="5" Grid.Row="4" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE4EnableChBx" Grid.Column="0" Grid.Row="5"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE4Btn" Grid.Row="5" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE4AffondamentoTxBx" Grid.Column="3" Grid.Row="5" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE4LarghezzaTxBx" Grid.Column="5" Grid.Row="5" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE5EnableChBx" Grid.Column="0" Grid.Row="6"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE5Btn" Grid.Row="6" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE5AffondamentoTxBx" Grid.Column="3" Grid.Row="6" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE5LarghezzaTxBx" Grid.Column="5" Grid.Row="6" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE6EnableChBx" Grid.Column="0" Grid.Row="7"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE6Btn" Grid.Row="7" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE6AffondamentoTxBx" Grid.Column="3" Grid.Row="7" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE6LarghezzaTxBx" Grid.Column="5" Grid.Row="7" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE7EnableChBx" Grid.Column="0" Grid.Row="8"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE7Btn" Grid.Row="8" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE7AffondamentoTxBx" Grid.Column="3" Grid.Row="8" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE7LarghezzaTxBx" Grid.Column="5" Grid.Row="8" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE8EnableChBx" Grid.Column="0" Grid.Row="9"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE8Btn" Grid.Row="9" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE8AffondamentoTxBx" Grid.Column="3" Grid.Row="9" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE8LarghezzaTxBx" Grid.Column="5" Grid.Row="9" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE9EnableChBx" Grid.Column="0" Grid.Row="10"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE9Btn" Grid.Row="10" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE9AffondamentoTxBx" Grid.Column="3" Grid.Row="10" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE9LarghezzaTxBx" Grid.Column="5" Grid.Row="10" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+            <CheckBox Name="CTE10EnableChBx" Grid.Column="0" Grid.Row="11"
+                     Style="{StaticResource OmagCut_CheckBox_Single}" Margin="0,0,10,0"/>
+            <Button Name="CTE10Btn" Grid.Row="11" Grid.Column="1"
+                     Style="{StaticResource OmagCut_Button}" />
+            <EgtWPFLib:EgtTextBox Name="CTE10AffondamentoTxBx" Grid.Column="3" Grid.Row="11" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            <EgtWPFLib:EgtTextBox Name="CTE10LarghezzaTxBx" Grid.Column="5" Grid.Row="11" Margin="10,0,10,0"
+                     Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+
+         </Grid>
+
+      </GroupBox>
+
+      <!--Selezione il tipo di avvio del programma-->
+      <GroupBox Name="StartLauncherGpBx"
                 Grid.Column="3" Grid.RowSpan="3" Grid.ColumnSpan="1"
                 Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid >
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="0.5*"/>
-                    <ColumnDefinition Width="4*"/>
-                    <ColumnDefinition Width="0.5*"/>
-                </Grid.ColumnDefinitions>
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="0.25*"/>
-                    <RowDefinition Height="0.5*"/>
-                    <RowDefinition Height="0.25*"/>
-                </Grid.RowDefinitions>
+         <Grid >
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.5*"/>
+               <ColumnDefinition Width="4*"/>
+               <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.25*"/>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="0.25*"/>
+            </Grid.RowDefinitions>
 
-                <ComboBox Name="StartLauncherCmBx" Grid.Column="1" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}">
-                    <ComboBox.ItemTemplate>
-                        <DataTemplate>
-                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                        </DataTemplate>
-                    </ComboBox.ItemTemplate>
-                </ComboBox>
+            <ComboBox Name="StartLauncherCmBx" Grid.Column="1" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}">
+               <ComboBox.ItemTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                  </DataTemplate>
+               </ComboBox.ItemTemplate>
+            </ComboBox>
 
-            </Grid>
-        </GroupBox>
-       
-        <GroupBox Name="FeedbackGpBx"
+         </Grid>
+      </GroupBox>
+
+      <GroupBox Name="FeedbackGpBx"
                 Grid.Column="4" Grid.RowSpan="3" Grid.ColumnSpan="1"
                 Style="{DynamicResource OmagCut_GroupBox}">
-            <Grid>
-                <Grid.ColumnDefinitions>
-                   <ColumnDefinition Width="0.25*"/>
-                   <ColumnDefinition Width="1*"/>
-                   <ColumnDefinition Width="0.25*"/>
-                </Grid.ColumnDefinitions>
-                        <Grid.RowDefinitions>
-                            <RowDefinition Height="0.5*"/>
-                            <RowDefinition Height="1*"/>
-                            <RowDefinition Height="0.5*"/>
-                        </Grid.RowDefinitions>
-                
-                        <Button Name="FeedbackBtn"
+         <Grid>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="0.25*"/>
+               <ColumnDefinition Width="1*"/>
+               <ColumnDefinition Width="0.25*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="0.5*"/>
+               <RowDefinition Height="1*"/>
+               <RowDefinition Height="0.5*"/>
+            </Grid.RowDefinitions>
+
+            <Button Name="FeedbackBtn"
                               Grid.Row="1" Grid.Column="1"
                               Style="{DynamicResource OmagCut_YellowIconButton}">
-                        <Image Source="{DynamicResource SendImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-                </Button>
-            </Grid>
+               <Image Source="{DynamicResource SendImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+            </Button>
+         </Grid>
 
       </GroupBox>
 

Options/OptionsPageUC.xaml.vb

@@ -7,6 +7,8 @@ Public Class OptionsPageUC
    Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
 
    Private UnitsList() As String = {"inch", "mm"}
+   Private FractionPatternList() As String = {"Decimal", "Foot'Inch""", "Only Inch"}
+   Private PrecisionList() As Double = {2, 4, 8, 16, 32, 64, 128}
    Private ThemesList() As String = {"Classic", "Dark"}
 
    ' "Last Project", "New Project", "Open Folder", "Show Window"
@@ -18,6 +20,10 @@ Public Class OptionsPageUC
       LanguageCmBx.ItemsSource = m_MainWindow.m_LanguagesList
       ' Associazione della lista unità di misura alla combobox
       UnitsOfMeasureCmBx.ItemsSource = UnitsList
+      ' Associazione della lista dei Pattern
+      FractionPatternCmBx.ItemsSource = FractionPatternList
+      ' Associazione della lista della precisione
+      PrecisionCmBx.ItemsSource = PrecisionList
       ' Associazione della lista temi alla combobox
       ThemesCmBx.ItemsSource = ThemesList
 
@@ -27,6 +33,16 @@ Public Class OptionsPageUC
       ' Imposto l'unità di misura corrente
       UnitsOfMeasureCmBx.SelectedIndex = If(EgtUiUnitsAreMM(), 1, 0)
 
+      ' Imposto il pattern della per la rappresentazione frazionaria
+      nCurrFractionPattern = GetPrivateProfileInt(S_GENERAL, K_FRACTIONPATTERN, 0, m_MainWindow.GetIniFile())
+      FractionPatternCmBx.SelectedIndex = nCurrFractionPattern
+      EgtWPFLib.FractionStringConverter.SetCurrFractionPattern(nCurrFractionPattern)
+
+      ' Imposto la preciosne della rappresentazione frazionaria
+      dPrecision = CDbl(GetPrivateProfileInt(S_GENERAL, K_PRECISION, 64, m_MainWindow.GetIniFile()))
+      Dim Index As Integer = PrecisionCmBx.Items.IndexOf(dPrecision)
+      PrecisionCmBx.SelectedIndex = Index
+
       ' Imposto il tema corrente
       ThemesCmBx.SelectedIndex = GetPrivateProfileInt(S_GENERAL, K_THEME, 0, m_MainWindow.GetIniFile())
       Themes_StartUp()
@@ -322,9 +338,60 @@ Public Class OptionsPageUC
       EgtSetUiUnits(bMM)
       m_MainWindow.m_CurrentProjectPageUC.UpdateHeightTxBx()
       WritePrivateProfileString(S_GENERAL, K_MMUNITS, If(bMM, "1", "0"), m_MainWindow.GetIniFile())
+
+      If bMM Then
+         ' se selezione MILLIMETRI nascondo la combobox che permette di inserie il tipo di pattern per la definizione delle frazioni
+         FractionPatternCmBx.Visibility = Visibility.Hidden
+         PrecisionCmBx.Visibility = Visibility.Hidden
+         Dim RowNum As Integer = UnitGrid.RowDefinitions.Count
+         If RowNum > 3 Then
+            UnitsOfMeasureCmBx.SetValue(Grid.RowSpanProperty, 3)
+         End If
+      Else
+         ' se selezione POLLICI mostro la combobox che permette di inserie il tipo di pattern per la definizione delle frazioni
+         FractionPatternCmBx.Visibility = Visibility.Visible
+         PrecisionCmBx.Visibility = Visibility.Visible
+         UnitsOfMeasureCmBx.SetValue(Grid.RowSpanProperty, 1)
+      End If
+
       ' Aggiorno dati nella pagina dipendenti da unità di misura
       UpdateSlabDxf()
       UpdateAllCSTA()
+      If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+         m_MainWindow.m_CurrentMachine.LoadWJMaterial()
+         If Not IsNothing(m_MainWindow.m_MachinePageUC.m_WaterJetPageUC) Then
+            m_MainWindow.m_MachinePageUC.m_WaterJetPageUC.WaterJetPage_Reinitialize()
+         End If
+      End If
+   End Sub
+
+   Private Sub FractionPatternCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles FractionPatternCmBx.SelectionChanged
+      nCurrFractionPattern = FractionPatternCmBx.SelectedIndex
+      EgtWPFLib.FractionStringConverter.SetCurrFractionPattern(nCurrFractionPattern)
+      WritePrivateProfileString(S_GENERAL, K_FRACTIONPATTERN, nCurrFractionPattern, m_MainWindow.GetIniFile())
+      ' Aggiorno dati nella pagina dipendenti da unità di misura
+      UpdateSlabDxf()
+      UpdateAllCSTA()
+      If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+         m_MainWindow.m_CurrentMachine.LoadWJMaterial()
+         If Not IsNothing(m_MainWindow.m_MachinePageUC.m_WaterJetPageUC) Then
+            m_MainWindow.m_MachinePageUC.m_WaterJetPageUC.WaterJetPage_Reinitialize()
+         End If
+      End If
+   End Sub
+
+   Private Sub PrecisionCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles PrecisionCmBx.SelectionChanged
+      dPrecision = PrecisionCmBx.SelectedValue
+      WritePrivateProfileString(S_GENERAL, K_PRECISION, dPrecision, m_MainWindow.GetIniFile())
+      ' Aggiorno dati nella pagina dipendenti da unità di misura
+      UpdateSlabDxf()
+      UpdateAllCSTA()
+      If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+         m_MainWindow.m_CurrentMachine.LoadWJMaterial()
+         If Not IsNothing(m_MainWindow.m_MachinePageUC.m_WaterJetPageUC) Then
+            m_MainWindow.m_MachinePageUC.m_WaterJetPageUC.WaterJetPage_Reinitialize()
+         End If
+      End If
    End Sub
 
    Private Sub ThemesCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles ThemesCmBx.SelectionChanged
@@ -648,70 +715,70 @@ Public Class OptionsPageUC
 
    Private Sub CTSA1InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA1InclinazioneTxBx.TextChanged
       If CTSA1InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA1InclinazioneTxBx.Text, dAng) Then CTSA1InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA1InclinazioneTxBx.Text, dAng) Then CTSA1InclinazioneTxBx.Text = ""
       End If
       CTSA1EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA2InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA2InclinazioneTxBx.TextChanged
       If CTSA2InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA2InclinazioneTxBx.Text, dAng) Then CTSA2InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA2InclinazioneTxBx.Text, dAng) Then CTSA2InclinazioneTxBx.Text = ""
       End If
       CTSA2EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA3InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA3InclinazioneTxBx.TextChanged
       If CTSA3InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA3InclinazioneTxBx.Text, dAng) Then CTSA3InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA3InclinazioneTxBx.Text, dAng) Then CTSA3InclinazioneTxBx.Text = ""
       End If
       CTSA3EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA4InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA4InclinazioneTxBx.TextChanged
       If CTSA4InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA4InclinazioneTxBx.Text, dAng) Then CTSA4InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA4InclinazioneTxBx.Text, dAng) Then CTSA4InclinazioneTxBx.Text = ""
       End If
       CTSA4EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA5InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA5InclinazioneTxBx.TextChanged
       If CTSA5InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA5InclinazioneTxBx.Text, dAng) Then CTSA5InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA5InclinazioneTxBx.Text, dAng) Then CTSA5InclinazioneTxBx.Text = ""
       End If
       CTSA5EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA6InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA6InclinazioneTxBx.TextChanged
       If CTSA6InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA6InclinazioneTxBx.Text, dAng) Then CTSA6InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA6InclinazioneTxBx.Text, dAng) Then CTSA6InclinazioneTxBx.Text = ""
       End If
       CTSA6EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA7InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA7InclinazioneTxBx.TextChanged
       If CTSA7InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA7InclinazioneTxBx.Text, dAng) Then CTSA7InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA7InclinazioneTxBx.Text, dAng) Then CTSA7InclinazioneTxBx.Text = ""
       End If
       CTSA7EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA8InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA8InclinazioneTxBx.TextChanged
       If CTSA8InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA8InclinazioneTxBx.Text, dAng) Then CTSA8InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA8InclinazioneTxBx.Text, dAng) Then CTSA8InclinazioneTxBx.Text = ""
       End If
       CTSA8EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA9InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA9InclinazioneTxBx.TextChanged
       If CTSA9InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA9InclinazioneTxBx.Text, dAng) Then CTSA9InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA9InclinazioneTxBx.Text, dAng) Then CTSA9InclinazioneTxBx.Text = ""
       End If
       CTSA9EnableChBx_Click(sender, e)
    End Sub
 
    Private Sub CTSA10InclinazioneTxBx_TextChanged(sender As Object, e As TextChangedEventArgs) Handles CTSA10InclinazioneTxBx.TextChanged
       If CTSA10InclinazioneTxBx.Text <> "-" Then
-         Dim dAng As Double : If Not StringToLen(CTSA10InclinazioneTxBx.Text, dAng) Then CTSA10InclinazioneTxBx.Text = ""
+         Dim dAng As Double : If Not StringToDouble(CTSA10InclinazioneTxBx.Text, dAng) Then CTSA10InclinazioneTxBx.Text = ""
       End If
       CTSA10EnableChBx_Click(sender, e)
    End Sub

Project/CurrentProjectPageUC.xaml.vb

@@ -107,7 +107,8 @@ Public Class CurrentProjectPageUC
          Dim nDepthBits As Integer = GetPrivateProfileInt(S_OPENGL, K_DEPTHBITS, 32, m_MainWindow.GetIniFile())
          CurrentProjectScene.SetViewAttributes(nDriver, b2Buff, nColorBits, nDepthBits)
          ' inizializzo la scena (DB geometrico + visualizzazione) e verifico presenza chiave
-         If Not CurrentProjectScene.Init() Then
+         Dim bProd As Boolean = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE)
+         If Not CurrentProjectScene.Init() Or Not bProd Then
             ' Rimuovo l'host della scena perchè altrimenti rimarrebbe il buco!!
             Me.CurrentProjectPageGrid.Children.Remove(CurrentProjectSceneHost)
             ' Flag per riavvio programma
@@ -158,6 +159,7 @@ Public Class CurrentProjectPageUC
 #End If
             m_MainWindow.Close()
             If bRestart Then Process.Start(Application.ResourceAssembly.Location)
+            Return
          End If
          ' visualizzazione avanzata dei triangoli costituenti le superfici
          Dim bShowTriaAdv As Boolean = (GetPrivateProfileInt(S_SCENE, K_SHOWTRIAADV, 1, m_MainWindow.GetIniFile()) <> 0)
@@ -168,11 +170,6 @@ Public Class CurrentProjectPageUC
          ' dimensione lineare max in pixel delle textures
          Dim nTxrMaxLinPix As Integer = GetPrivateProfileInt(S_SCENE, K_TEXMAXLINPIX, 4096, m_MainWindow.GetIniFile())
          EgtSetTextureMaxLinPixels(nTxrMaxLinPix)
-         ' Verifico abilitazione prodotto
-         If Not m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.CUT_BASE) Then
-            Dim MissingKeyWnd As New EgtMsgBox(m_MainWindow, EgtMsg(MSG_MISSINGKEYWD + 1), EgtMsg(MSG_MISSINGKEYWD + 5), EgtMsgBox.Buttons.OK, EgtMsgBox.Icons.NULL, 1)
-            m_MainWindow.Close()
-         End If
          ' Recupero e imposto handle finestra principale
          Dim hMainWnd As IntPtr = New WindowInteropHelper(Application.Current.MainWindow).Handle
          EgtSetMainWindowHandle(hMainWnd)
@@ -399,6 +396,8 @@ Public Class CurrentProjectPageUC
       m_MainWindow.m_CadCutPageUC.m_NestPage.CalcRawPart()
       m_dRawHeight = 0
       UpdateHeightTxBx()
+      ' prima di parcheggiare svuoto dei pezzi in parcheggio sia vuota
+      m_MainWindow.m_CadCutPageUC.m_NestPage.ResetListOfGruopInPark()
       ' Parcheggio correttamente i pezzi precedentemente salvati
       Dim nId2 As Integer = EgtGetFirstPart()
       While nId2 <> GDB_ID.NULL
@@ -410,9 +409,14 @@ Public Class CurrentProjectPageUC
          nId2 = EgtGetNextPart(nId2)
       End While
       ' Aggiorno Aree totale e da lavorare dei pezzi
-      SetTotalArea( dTotArea)
+      SetTotalArea(dTotArea)
       UpdateToProduceArea()
       ShowAreas()
+      ' Salvo info di C home
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHome, 0))
+      EgtZoom(ZM.ALL)
       ' Dichiaro progetto non modificato
       EgtResetModified()
       Return True
@@ -523,7 +527,21 @@ Public Class CurrentProjectPageUC
          m_MainWindow.m_CurrentMachine.dAdditionalTable = dValue
       End If
       ' forzo visualizzazione eventuali dati su aree
-      SetAreasStatus( True)
+      SetAreasStatus(True)
+      ' Recupero info C Home
+      Dim dCHomeCurrMach As Double
+      Dim dCHomeCurrproj As Double
+      EgtGetAxisHomePos("C", dCHomeCurrMach)
+      ' Verifico che esista l'info del progetto
+      If EgtExistsInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME) Then
+         EgtGetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, dCHomeCurrproj)
+         ' Se la macchina indicata ha C Home differente allora comunico un errore del progetto
+         If Math.Abs(dCHomeCurrproj - dCHomeCurrMach) > EPS_ANG_SMALL Then
+            EgtOutLog(" WARNING -> C axes home project is different from current machine, delta ang C home:" & DoubleToString(dCHomeCurrproj - dCHomeCurrMach, 2))
+         End If
+      Else
+         EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHomeCurrMach, 0))
+      End If
       ' Dichiaro progetto non modificato
       EgtResetModified()
       Return True

Project/OmagPhotoWD.xaml.vb

@@ -101,6 +101,7 @@ Public Class OmagPhotoWD
       Dim m_refImagePrevieV As New EgtPHOTOLib.ImagePreviewV()
       ' modifico l'immagine e salvo
       m_refImagePrevieV.SetContourScraps(m_ContornScrap)
+      m_refImagePrevieV.Hide()
       m_refImagePrevieV.Show()
       m_refImagePrevieV.SaveImage()
       m_refImagePrevieV.Close()

Project/OpenPageUC.xaml

@@ -2,7 +2,8 @@
    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
    xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" 
-   xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
+   xmlns:d="http://schemas.microsoft.com/expression/blend/2008"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"          
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="OpenPage_Initialized" Loaded="OpenPage_Loaded" Unloaded="OpenPage_Unloaded">
       
@@ -17,22 +18,42 @@
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="0.5*"/>
             <RowDefinition Height="8*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
+                <RowDefinition Height="1*"/>
+            </Grid.RowDefinitions>
          
-         <!-- Definizione della Grid Inferiore per i Button V e X -->
+         <!-- Definizione della Grid Superiore -->
          <Grid Name="UpperButtonsGrid" Grid.Column="1" Grid.RowSpan="2">
             <Grid.ColumnDefinitions>
                <ColumnDefinition Width="5*"/>
                <ColumnDefinition Width="7*"/>
             </Grid.ColumnDefinitions>
-            
+       
          </Grid>
 
-         <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-         <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
-            ItemsSource="{Binding ItemList}"/>
-         
+         <TextBlock Name="FilePathTxBl" Grid.Row="0" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+            
+          <Grid Grid.Row="1" Grid.RowSpan="2">
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="6.5*"/>
+                    <RowDefinition Height="0.65*"/>
+                </Grid.RowDefinitions>
+                <ListBox Name="FileListBox"  ItemTemplate="{DynamicResource DataTemplateItem}"
+                  ItemsSource="{Binding ItemList}"/>
+
+                <Grid Grid.Row="1" Margin="0,0,8,0">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="4*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <EgtWPFLib:EgtTextBox Name="FindTxBx" Grid.Column="0"
+                               Style="{DynamicResource OmagCut_LeftKeyboardTextBoxNoBorder}"/>
+                    <Button Name="ClearFindBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Margin="0,6,2,6">
+                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}" Width="30" />
+                    </Button>
+                </Grid>
+
+            </Grid>
+          
          <Border Name="MessageBrd" Grid.Row="3" BorderThickness="0,1,0,0" BorderBrush="Gray">
             <TextBlock Name="MessageTxBx"  TextAlignment="Center"
                    Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>

Project/OpenPageUC.xaml.vb

@@ -38,6 +38,7 @@ Public Class OpenPageUC
       OpenSceneHost.SetValue(Grid.ColumnProperty, 1)
       OpenSceneHost.SetValue(Grid.RowProperty, 2)
       ' OpenSceneHost.SetValue(Grid.RowSpanProperty, 1)
+      OpenSceneHost.SetValue(Grid.ColumnSpanProperty, 2)
       Me.OpenPageGrid.Children.Add(OpenSceneHost)
 
       ' Definizione del collegamento tra ItemList e ListBox1
@@ -203,6 +204,36 @@ Public Class OpenPageUC
       End If
    End Sub
 
+   Private Sub FindTxBx_EgtClosed(sender As Object, e As EventArgs) Handles FindTxBx.EgtClosed
+      ' Elimino spazi iniziali e finali
+      FindTxBx.Text = FindTxBx.Text.Trim()
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      Dim UpdateListFile As New List(Of IconListBoxItem)
+      ' Se esiste un nome
+      If Not String.IsNullOrWhiteSpace(FindTxBx.Text) Then
+         For Each Item As IconListBoxItem In FileListBox.ItemsSource
+            If Item.Name.ToLower.Contains(FindTxBx.Text.ToLower) Then
+               UpdateListFile.Add(Item)
+            End If
+         Next
+      End If
+      If UpdateListFile.Count > 0 Then
+         FileListBox.ItemsSource = UpdateListFile
+      Else
+         FileListBox.ItemsSource = m_MainWindow.m_OpenItemList
+      End If
+   End Sub
+
+   Private Sub ClearFindBtn_Click() Handles ClearFindBtn.Click
+      ' svuoto la text
+      FindTxBx.Text = ""
+      ' ricarico la lista dei file
+      LoadCurrDir()
+      ' e aggiorno la lista dei file
+      FileListBox.ItemsSource = m_MainWindow.m_OpenItemList
+   End Sub
+
    Private Function ClearView() As Boolean
       ' Pulisco il DB geometrico locale
       EgtNewFile()
@@ -460,7 +491,19 @@ Public Class OpenPageUC
       m_SceneButtons.MeasureBtn.IsChecked = False
       ' Istruzioni per chiudere OpenPageUC e aprire currentproject e cadcut page
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_OpenPage)
-      m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+      If m_MainWindow.m_PrevActivePage = MainWindow.Pages.CadCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.CadCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
+            m_MainWindow.CadCutBtn.IsChecked = True
+         End If
+      ElseIf m_MainWindow.m_PrevActivePage = MainWindow.Pages.FrameCut Then
+         m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_CurrentProjectPageUC)
+         If Not m_MainWindow.FrameCutBtn.IsChecked Then
+            m_MainWindow.m_CurrentProjectPageUC.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
+            m_MainWindow.FrameCutBtn.IsChecked = True
+         End If
+      End If
       ' Non modifico progetto corrente
       m_MainWindow.m_ActivePage = m_MainWindow.m_PrevActivePage
    End Sub

Project/ProjectMgrUC.xaml.vb

@@ -1,4 +1,6 @@
-Imports System.IO
+Imports System.ComponentModel
+Imports System.Drawing
+Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib
 
@@ -99,7 +101,6 @@ Public Class ProjectMgrUC
       m_CurrProjPage.NewProject(nTabInd, bRetainParkedParts)
       ' Gestione stato FastGrid
       m_MainWindow.m_CadCutPageUC.m_FastGridSlabManager.OnPostNewProject()
-      EgtZoom(ZM.ALL)
    End Sub
 
    Friend Function ChooseTable() As Integer
@@ -256,10 +257,18 @@ Public Class ProjectMgrUC
       ResetAllSplitCurv()
       ' cancello tutti i punti di inizio (Waterjet)
       ResetAllStartCurv()
+      ' cancello tutti i ponticelli disegnati
+      ResetAllBRidges()
       ' Ricalcolo tutte le lavorazioni
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
       If nWarn = 1 Then m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SPLITPAGEUC + 11)) ' Lama troppo grande per utilizzo ventosa
+      ' Se eistono elimino i grezzi delle fasi che non contengono lavorazioni
+      ResetAllRawPart()
+      ' Aggiorno Info C Home
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_CAXESHOME, DoubleToString(dCHome, 0))
       ' Aggiorno visualizzazione
       EgtDraw()
    End Sub
@@ -476,7 +485,6 @@ Public Class ProjectMgrUC
       If Not (m_CurrMachine.bProdLine Or m_CurrMachine.bDemo) Then
          ' Download programma (eventuali errori sono segnalati dalla funzione)
          If m_CurrNcComm.SendProgram(sCncPath, 900) Then
-            ' copio il progetto corrente come progetto in lavorazione
             Dim sWrkPath As String = m_MainWindow.GetTempDir() & "\" & "WorkProj.nge"
             My.Computer.FileSystem.CopyFile(sMchPath, sWrkPath, True)
             ' se abilitato e non è restart, lancio eventuale lua post-trasmissione

RawPhoto/OtherRefTabWD.xaml

@@ -0,0 +1,82 @@
+<Window x:Class="OtherRefTabWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+   FontFamily="{DynamicResource OmagCut_Font}"
+   ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+   Title="ModifStartEndWD" Height="250" Width="320" ShowInTaskbar="False">
+
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid x:Name="SaveNameGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.2*"/>
+                <ColumnDefinition Width="2*"/>
+                <ColumnDefinition Width="2*"/>
+                <ColumnDefinition Width="0.2*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <!--<RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>-->
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="0.2*"/>
+            </Grid.RowDefinitions>
+
+            <TextBlock Name="RefRawTxbl" Grid.Column="1" Grid.Row="1"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            
+            <ComboBox Name="RefTabModeCmBx" Grid.Column="2" Grid.Row="1" Style="{StaticResource OmagCut_ComboBox}" 
+               MaxDropDownHeight="300" Margin="0,0,0,0">
+                <ComboBox.ItemTemplate>
+                    <DataTemplate>
+                        <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                    </DataTemplate>
+                </ComboBox.ItemTemplate>
+            </ComboBox>
+
+            <TextBlock Name="RefTabXTxbl" Grid.Column="1" Grid.Row="3"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="RefTabXTxBx" Grid.Column="2" Grid.Row="3"
+            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+            <TextBlock Name="RefTabYTxbl" Grid.Column="1" Grid.Row="5"
+            Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+            <EgtWPFLib:EgtTextBox Name="RefTabYTxBx" Grid.Column="2" Grid.Row="5"
+            Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+
+            <Grid Name="ButtonsGrid" Grid.Column="1" Grid.ColumnSpan="2" Grid.Row="7" Grid.RowSpan="1">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="OkBtn" Grid.Column="1"
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <Button Name="ExitBtn" Grid.Column="3"
+                    IsCancel="True"
+                    Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+
+</Window>

RawPhoto/OtherRefTabWD.xaml.vb

@@ -0,0 +1,108 @@
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib
+
+Public Class OtherRefTabWD
+   Dim m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+   Dim m_RawPartPage As RawPartPageUC
+
+   Private m_sPosX As String = "0"
+   Private m_sPosY As String = "0"
+
+   Private m_dPrevOffsetX As Double = 0
+   Private m_dPrevOffsetY As Double = 0
+
+   Private m_SelIndex As Integer = 0
+
+   Sub New(Owner As Window, PosX As String, PosY As String, OffsetX As Double, OffsetY As Double, OtherRefMode As Integer)
+      Me.Owner = Owner
+      ' La chiamata è richiesta dalla finestra di progettazione.
+      InitializeComponent()
+
+      ' Aggiungere le eventuali istruzioni di inizializzazione dopo la chiamata a InitializeComponent().
+      m_sPosX = PosX
+      m_sPosY = PosY
+      m_dPrevOffsetX = OffsetX
+      m_dPrevOffsetY = OffsetY
+      m_SelIndex = OtherRefMode
+   End Sub
+
+   Private Sub OtherRrefTabWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' costruisco il riferimento alla pagina Raw
+      m_RawPartPage = m_MainWindow.m_RawPartPage
+      ' posiziono la finestra
+      Me.Top = Owner.Top + Owner.Height / 4 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 6 - Me.Width / 2
+      RefRawTxbl.Text = "Raw reference"
+      RefTabXTxbl.Text = "Position X"
+      RefTabYTxbl.Text = "Position Y"
+      RefTabModeCmBx.ItemsSource = m_RawPartPage.m_OtherRefTabList
+      RefTabModeCmBx.SelectedIndex = m_RawPartPage.m_OtherRefTabPos
+   End Sub
+
+   Private Sub OtherRrefTabWD_Load(sender As Object, e As EventArgs) Handles Me.Loaded
+      RefTabXTxBx.Text = m_sPosX
+      RefTabYTxBx.Text = m_sPosY
+   End Sub
+
+   Private Sub RefTabModeCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles RefTabModeCmBx.SelectionChanged
+      m_RawPartPage.m_OtherRefTabPos = RefTabModeCmBx.SelectedIndex
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABPOS, m_RawPartPage.m_OtherRefTabPos.ToString, m_MainWindow.GetIniFile())
+      m_RawPartPage.RefTabModeChange()
+   End Sub
+
+   Private Sub RefTabXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RefTabXTxBx.EgtClosed
+      Dim ptMin, ptMax As Point3d
+      If EgtGetTableArea(1, ptMin, ptMax) Then
+         Dim dX As Double = 0
+         StringToLen(RefTabXTxBx.Text, dX)
+         If Not (dX > 0 And dX < ptMax.x - ptMin.x) Then
+            If dX > 0 Then
+               dX = ptMax.x - ptMin.x
+            Else
+               dX = 0
+            End If
+            RefTabXTxBx.Text = LenToString(dX, 2)
+            ' errore, posizione fuori dalla tavola
+         End If
+         m_RawPartPage.m_OtherRefTabX = dX
+         m_RawPartPage.RefTabModeChange()
+      End If
+   End Sub
+
+   Private Sub RefTabYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RefTabYTxBx.EgtClosed
+      Dim ptMin, ptMax As Point3d
+      If EgtGetTableArea(1, ptMin, ptMax) Then
+         Dim dY As Double = 0
+         StringToLen(RefTabYTxBx.Text, dY)
+         If Not (dY > 0 And dY < ptMax.y - ptMin.y) Then
+            If dY > 0 Then
+               dY = ptMax.y - ptMin.y
+            Else
+               dY = 0
+            End If
+            RefTabYTxBx.Text = LenToString(dY, 2)
+            ' errore, posizione fuori dalla tavola
+         End If
+         m_RawPartPage.m_OtherRefTabY = dY
+         m_RawPartPage.RefTabModeChange()
+      End If
+   End Sub
+
+   Private Sub OkBtn_Click() Handles OkBtn.Click
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABX, DoubleToString(RefTabXTxBx.Text, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABY, DoubleToString(RefTabYTxBx.Text, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTABPOS, m_RawPartPage.m_OtherRefTabPos.ToString, m_MainWindow.GetIniFile())
+      Me.Close()
+   End Sub
+
+   Private Sub ExitBtn_Click() Handles ExitBtn.Click
+      ' riposiziono l'origine
+      m_RawPartPage.m_OtherRefTabX = m_sPosX
+      m_RawPartPage.m_OtherRefTabY = m_sPosY
+      ' ripristino il valore della combobox
+      m_RawPartPage.m_OtherRefTabPos = m_SelIndex
+      m_RawPartPage.RefTabModeChange()
+   End Sub
+
+End Class

RawPhoto/RawPartPageUC.xaml

@@ -6,76 +6,76 @@
    xmlns:d="http://schemas.microsoft.com/expression/blend/2008" 
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Loaded="RawPartPage_Loaded" Initialized="RawPartPage_Initialized" Unloaded="RawPartPage_Unloaded">
-      
-   <!-- Definizione della RowPartPage -->
-   <Grid Name="RowPartPageGrid" >
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="3*"/>
-         <ColumnDefinition Width="12*"/>
-      </Grid.ColumnDefinitions>
-      <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
-         <RowDefinition Height="8*"/>
-         <RowDefinition Height="1*"/>
-      </Grid.RowDefinitions>
-      
-      <!-- Definizione della Grid superiore -->
-      <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="5*"/>
-            <ColumnDefinition Width="7*"/>
-         </Grid.ColumnDefinitions>
-         
-      </Grid>
-      
-      <!-- Definizione della Grid Laterale -->
-      <Grid Name="LeftButtonGrid" Grid.RowSpan="3">
-      
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1.5*"/>
-            <ColumnDefinition Width="1.5*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="4*"/>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="1.5*"/>
-            <RowDefinition Height="1.*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
 
-         <RadioButton Name="OutlineBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
-               GroupName="DefinitionMethod_GrezzoUC"/>
-         <RadioButton Name="DamagedBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
-               Grid.Column="1" GroupName="DefinitionMethod_GrezzoUC"/>
+    <!-- Definizione della RowPartPage -->
+    <Grid Name="RowPartPageGrid" >
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="3*"/>
+            <ColumnDefinition Width="12*"/>
+        </Grid.ColumnDefinitions>
+        <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="8*"/>
+            <RowDefinition Height="1*"/>
+        </Grid.RowDefinitions>
 
-         <!-- Definizione della Grid per definizione grezzo -->
-         <Grid Name="RawMeasureGrd" Grid.Row="1" Grid.ColumnSpan="2">
+        <!-- Definizione della Grid superiore -->
+        <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="7*"/>
+            </Grid.ColumnDefinitions>
+
+        </Grid>
+
+        <!-- Definizione della Grid Laterale -->
+        <Grid Name="LeftButtonGrid" Grid.RowSpan="3">
+
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1.5*"/>
+                <ColumnDefinition Width="1.5*"/>
             </Grid.ColumnDefinitions>
             <Grid.RowDefinitions>
-               <RowDefinition Height="1*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="4*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="1.5*"/>
+                <RowDefinition Height="1.*"/>
+                <RowDefinition Height="0.5*"/>
+                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
-            <ComboBox Name="RawModeCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
-               MaxDropDownHeight="300" Margin="6,0,6,0">
-               <ComboBox.ItemTemplate>
-                  <DataTemplate>
-                     <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                  </DataTemplate>
-               </ComboBox.ItemTemplate>
-            </ComboBox>
+            <RadioButton Name="OutlineBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
+               GroupName="DefinitionMethod_GrezzoUC"/>
+            <RadioButton Name="DamagedBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"
+               Grid.Column="1" GroupName="DefinitionMethod_GrezzoUC"/>
 
-            <ComboBox Name="RawModeDamagedCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
+            <!-- Definizione della Grid per definizione grezzo -->
+            <Grid Name="RawMeasureGrd" Grid.Row="1" Grid.ColumnSpan="2">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                </Grid.RowDefinitions>
+
+                <ComboBox Name="RawModeCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
+               MaxDropDownHeight="300" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <ComboBox Name="RawModeDamagedCmBx" Grid.Row="0" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" 
                MaxDropDownHeight="300" Margin="6,0,6,0">
                     <ComboBox.ItemTemplate>
                         <DataTemplate>
@@ -85,114 +85,123 @@
                 </ComboBox>
 
                 <TextBlock Name="LengthTxBl" Grid.Row="1" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="LengthTxBx" Grid.Column="1" Grid.Row="1" Margin="13,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="LengthTxBx" Grid.Column="1" Grid.Row="1" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="WidthTxBl" Grid.Row="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="2" Margin="13,0,6,0"
+                <TextBlock Name="WidthTxBl" Grid.Row="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="2" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="HeightTxBl" Grid.Row="3" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="3" Margin="13,0,6,0"
+                <TextBlock Name="HeightTxBl" Grid.Row="3" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="HeightTxBx" Grid.Column="1" Grid.Row="3" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="OffsetXTxBl" Grid.Row="4" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="OffsetXTxBx" Grid.Column="1" Grid.Row="4" Margin="13,0,6,0"
+                <TextBlock Name="OffsetXTxBl" Grid.Row="4" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsetXTxBx" Grid.Column="1" Grid.Row="4" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="OffsetYTxBl" Grid.Row="5" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="OffsetYTxBx" Grid.Column="1" Grid.Row="5" Margin="13,0,6,0"
+                <TextBlock Name="OffsetYTxBl" Grid.Row="5" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="OffsetYTxBx" Grid.Column="1" Grid.Row="5" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="KerfTxBl" Grid.Row="6" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="KerfTxBx" Grid.Column="1" Grid.Row="6" Margin="13,0,6,0"
+                <TextBlock Name="KerfTxBl" Grid.Row="6" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="KerfTxBx" Grid.Column="1" Grid.Row="6" Margin="13,0,6,0"
                Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
 
-         </Grid>
-                  
-         <!-- Definizione della Grid per il materiale -->
-         <GroupBox Name="MaterialGpBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+            </Grid>
 
-            <ComboBox Name="MaterialsCmbx" Style="{StaticResource OmagCut_ComboBox}"
+            <!-- Definizione della Grid per il materiale -->
+            <GroupBox Name="MaterialGpBx" Grid.Row="2" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+
+                <ComboBox Name="MaterialsCmbx" Style="{StaticResource OmagCut_ComboBox}"
                MaxDropDownHeight="600">
-               <ComboBox.ItemTemplate>
-                  <DataTemplate>
-                     <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-                  </DataTemplate>
-               </ComboBox.ItemTemplate>
-            </ComboBox>
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding sName}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
 
-         </GroupBox>
+            </GroupBox>
 
-         <!-- Definizione della Grid per Punti -->
-         <GroupBox Name="PointsGpBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}" >
+            <!-- Definizione della Grid per Punti -->
+            <GroupBox Name="PointsGpBx" Grid.Row="3" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_GroupBox}" >
 
-            <Grid >
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1.5*"/>
-                  <ColumnDefinition Width="1.5*"/>
-               </Grid.ColumnDefinitions>
-               <Grid.RowDefinitions>
-                  <RowDefinition Height="1*"/>
-                  <RowDefinition Height="1*"/>
-               </Grid.RowDefinitions>
+                <Grid >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1.5*"/>
+                        <ColumnDefinition Width="1.5*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="1*"/>
+                        <RowDefinition Height="1*"/>
+                    </Grid.RowDefinitions>
 
-               <ToggleButton Name="AddBtn"
+                    <ToggleButton Name="AddBtn"
                   Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <ToggleButton Name="RemoveBtn" Grid.Column="1"
+                    <ToggleButton Name="RemoveBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <Button Name="CloseBtn" Grid.Row="1" Grid.ColumnSpan="2" 
+                    <Button Name="CloseBtn" Grid.Row="1" Grid.ColumnSpan="2" 
                   Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            </Grid>
-            
-         </GroupBox>
+                </Grid>
 
-         <!-- Definizione della Grid per Zona rovinata -->
-         <GroupBox Name="DamagedAreaGpBx" Grid.Row="4" Grid.ColumnSpan="2" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
+            </GroupBox>
 
-            <Grid>
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
+            <!-- Definizione della Grid per Zona rovinata -->
+            <GroupBox Name="DamagedAreaGpBx" Grid.Row="4" Grid.ColumnSpan="2" Grid.RowSpan="2" Style="{DynamicResource OmagCut_GroupBox}">
 
-               <ToggleButton Name="NewBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-               <ToggleButton Name="DeleteBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-            </Grid>
+                <Grid>
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
 
-         </GroupBox>
+                    <ToggleButton Name="NewBtn" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                    <ToggleButton Name="DeleteBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+                </Grid>
 
-         <Button Name="ConfirmPhotoBtn" Grid.Row="4" Grid.ColumnSpan="2" Visibility="Hidden" 
+            </GroupBox>
+
+            <TextBlock Name="OtherRefTabTxBl" Grid.Row="5" Grid.ColumnSpan="2" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"/>
+            <CheckBox Name="OtherRefTabChBx" Grid.Row="5" Grid.Column="1" Style="{StaticResource OmagCut_CheckBox}"
+                    HorizontalAlignment="Right" Margin="0,0,6,0"/>
+
+            <Button Name="ConfirmPhotoBtn" Grid.Row="4" Grid.ColumnSpan="2" Visibility="Hidden" 
             Style="{DynamicResource OmagCut_YellowTextButton}"/>
 
-      </Grid>
-      
-      <!-- Definizione della Grid Inferiore per i Button V e X -->
-      <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="6*"/>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
+        </Grid>
 
-         <Button Name="RawProbingBtn" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource RawProbeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+        <!-- Definizione della Grid Inferiore per i Button V e X -->
+        <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="5*"/>
+                <ColumnDefinition Width="1*"/>
+                <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
 
-         <Button Name="BarCodeBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource BarCodeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+            <Button Name="RawProbingBtn" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource RawProbeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
 
-         <Button Name="SlabIdBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource SlabIdImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-         </Button>
+            <Button Name="BarCodeBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource BarCodeImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
 
-         <Button Name="OkBtn" Grid.Column="5" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-            <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
+            <Button Name="SlabIdBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource SlabIdImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="OtherRefTabBtn" Grid.Column="4" Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+                <Image Source="{DynamicResource RefTabImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+            </Button>
+
+            <Button Name="OkBtn" Grid.Column="6" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                <Image Source="{DynamicResource VImg}" Width="65" Height="65" HorizontalAlignment="Center"
             VerticalAlignment="Center" />
-         </Button>
-         
-      </Grid>
-      
-   </Grid>
-   
+            </Button>
+
+        </Grid>
+
+    </Grid>
+
 </UserControl>

RawPhoto/RawPartPageUC.xaml.vb

@@ -1,6 +1,9 @@
 Imports System.Globalization
+Imports System.IO
+Imports System.Windows.Media.Animation
 Imports EgtUILib
 Imports EgtWPFLib
+Imports Microsoft.VisualBasic.Devices
 
 Public Class RawPartPageUC
 
@@ -78,6 +81,16 @@ Public Class RawPartPageUC
    ' Costante raggio cerchietto
    Private Const RAD_CIRCLE As Double = 30
 
+   ' Riferimento grezzo
+   Private m_bEnableOtherRefTab As Boolean = False
+   Private m_bOtherRefTab As Boolean
+   Public m_OtherRefTabX As Double = 0
+   Public m_OtherRefTabY As Double = 0
+   Public m_OtherRefTabList(3) As String
+   Public m_OtherRefTabPos As Integer = 0
+   Private m_nOtherRefTabLay As Integer = GDB_ID.NULL
+   Private m_OtherRefTabPoint As Point3d
+
    ' mostra la pagina delle lavorazioni
    Private m_SmartMachiningPage As Boolean = False
 
@@ -105,6 +118,13 @@ Public Class RawPartPageUC
       FROM_SAW = 7
    End Enum
 
+   Private Enum OTHERREFMODE As Integer
+      BL = 0
+      BR = 1
+      TR = 2
+      TL = 3
+   End Enum
+
    Private Sub RawPartPage_Initialized(sender As Object, e As EventArgs)
 
       'Creazione della Page UserControl e relative impostazioni
@@ -145,6 +165,13 @@ Public Class RawPartPageUC
          ReDim Preserve m_RawModeListEx(3)
       End If
       RawModeCmBx.ItemsSource = m_RawModeList
+
+      ' Creo la lista dei riferimenti tavola 
+      m_OtherRefTabList(OTHERREFMODE.BL) = "Bottom left"
+      m_OtherRefTabList(OTHERREFMODE.BR) = "Bottom right"
+      m_OtherRefTabList(OTHERREFMODE.TR) = "Top right"
+      m_OtherRefTabList(OTHERREFMODE.TL) = "Top left"
+
       ' lista per selezione RawModeDamaged
       m_RawModeDamagedList(0) = EgtMsg(MSG_RAWPARTPAGEUC + 2)    'Per Punti
       m_RawModeDamagedList(1) = EgtMsg(MSG_RAWPARTPAGEUC + 30)   'Da Laser
@@ -184,6 +211,8 @@ Public Class RawPartPageUC
       RemoveBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 15)        'Remove - Rimuovi
       CloseBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 31)         'Close - Chiudi
       ConfirmPhotoBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 24)  'Conferma
+
+      OtherRefTabTxBl.Text = "New Ref On Tab"
    End Sub
 
    Private Sub RawPartPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -277,6 +306,12 @@ Public Class RawPartPageUC
             Utility.SetBlockAndSlabNbr(sBlock, sSlabNbr)
          End If
       End If
+
+      ' Carico le info del riferimento alternativo della tavola
+      m_nOtherRefTabLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
+      LoadOtherRefTab()
+
       ' Assegno dati grezzo rettangolare ai textbox
       LengthTxBx.Text = LenToString(m_RawLength, 2)
       WidthTxBx.Text = LenToString(m_RawWidth, 2)
@@ -320,6 +355,36 @@ Public Class RawPartPageUC
       Next
    End Sub
 
+   Private Sub LoadOtherRefTab()
+      m_bEnableOtherRefTab = (GetPrivateProfileInt(S_RAWPART, K_ENABLEOTHERREFTAB, 0, m_MainWindow.GetIniFile()) <> 0)
+      If Not m_bEnableOtherRefTab Then
+         OtherRefTabBtn.Visibility = Visibility.Collapsed
+         OtherRefTabChBx.Visibility = Visibility.Collapsed
+         OtherRefTabTxBl.Visibility = Visibility.Collapsed
+         Return
+      End If
+      m_bOtherRefTab = (GetPrivateProfileInt(S_RAWPART, K_OTHERREFTAB, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_OtherRefTabX = GetPrivateProfileDouble(S_RAWPART, K_OTHERREFTABX, 0, m_MainWindow.GetIniFile())
+      m_OtherRefTabY = GetPrivateProfileDouble(S_RAWPART, K_OTHERREFTABY, 0, m_MainWindow.GetIniFile())
+      m_OtherRefTabPos = GetPrivateProfileInt(S_RAWPART, K_OTHERREFTABPOS, 0, m_MainWindow.GetIniFile())
+      ' RefTabPosCmbx.SelectedIndex = m_OtherRefTabPos
+      OtherRefTabChBx.IsChecked = m_bOtherRefTab
+      ' se riferimento tavola differente da quello atteso
+      If m_bOtherRefTab Then
+         ' dasibilito la modifica dei parametri di Offset
+         OffsetXTxBx.IsEnabled = False
+         OffsetYTxBx.IsEnabled = False
+         UpdateOffsetText()
+      End If
+
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nOtherRefTabLay)
+      ' Acquisisco punto da disegno
+      m_OtherRefTabPoint = New Point3d(m_ptTableMin.x + m_OtherRefTabX, m_ptTableMin.y + m_OtherRefTabY, m_ptTableMin.z + 0.15 + m_CurrentMachine.dAdditionalTable)
+      CreateOtherRefTab(m_nOtherRefTabLay, m_OtherRefTabPoint)
+      ' EgtDraw()
+   End Sub
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo
       If Not m_bActive Then Return
@@ -513,6 +578,8 @@ Public Class RawPartPageUC
       End Select
       ' Aggiorno il punto precedente
       m_ptPrev = ptCurr
+      ' Resetto i ponticelli (per ora non sono in grado di muoverli assieme ai pezzi)
+      ResetAllBRidges()
    End Sub
 
    Private Sub ModifyRectangle(ptCurr As Point3d)
@@ -928,6 +995,13 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = True
+               OtherRefTabBtn.IsEnabled = True
+               ' disegno il riferimento
+               m_OtherRefTabPoint = New Point3d(m_ptTableMin.x + m_OtherRefTabX, m_ptTableMin.y + m_OtherRefTabY, m_ptTableMin.z + 0.15 + m_CurrentMachine.dAdditionalTable)
+               CreateOtherRefTab(m_nOtherRefTabLay, m_OtherRefTabPoint)
+            End If
          Case RAWMODE.BY_POINTS
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -944,6 +1018,12 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            ' disettivo la possibilità di modificare il riferimento 
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.FROM_LASER
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -960,6 +1040,11 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.DAMAGED
             RawModeCmBx.IsEnabled = False
             RawModeDamagedCmBx.Visibility = Visibility.Visible
@@ -978,6 +1063,11 @@ Public Class RawPartPageUC
             DamagedAreaGpBx.Visibility = Windows.Visibility.Visible
             ' Disattivo bottoni foto
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.FROM_PHOTO
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -990,6 +1080,11 @@ Public Class RawPartPageUC
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ' Visualizzo bottoni foto
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Visible
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.DAMAGED_BY_LASER
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Visible
@@ -1006,6 +1101,11 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.DAMAGED_BY_SAW
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Visible
@@ -1022,6 +1122,11 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
          Case RAWMODE.FROM_SAW
             RawModeCmBx.IsEnabled = True
             RawModeDamagedCmBx.Visibility = Visibility.Collapsed
@@ -1038,11 +1143,26 @@ Public Class RawPartPageUC
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
+            If m_bEnableOtherRefTab Then
+               OtherRefTabChBx.IsEnabled = False
+               OtherRefTabBtn.IsEnabled = False
+               EgtEmptyGroup(m_nOtherRefTabLay)
+            End If
       End Select
+      ' se abilitato nuovo riferimento del grezzo disabilito le text per offset
+      If OtherRefTabChBx.IsChecked Then
+         OffsetXTxBx.IsEnabled = False
+         OffsetYTxBx.IsEnabled = False
+      End If
    End Sub
 
    Private Sub OutlineBtn_Click(sender As Object, e As RoutedEventArgs) Handles OutlineBtn.Click
       If m_ActiveRawMode = RAWMODE.DAMAGED Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER Or m_ActiveRawMode = RAWMODE.DAMAGED_BY_SAW Then
+         If m_bEnableOtherRefTab Then
+            OtherRefTabTxBl.Visibility = Visibility.Visible
+            OtherRefTabBtn.Visibility = Visibility.Visible
+            OtherRefTabChBx.Visibility = Visibility.Visible
+         End If
          ' m_ActiveRawMode = RAWMODE.BY_POINTS
          m_ActiveRawMode = m_PrecActiveRawMode
          RawModeCmBx.SelectedIndex = m_ActiveRawMode
@@ -1053,6 +1173,12 @@ Public Class RawPartPageUC
    End Sub
 
    Private Sub DamagedBtn_Click(sender As Object, e As RoutedEventArgs) Handles DamagedBtn.Click
+      If m_bEnableOtherRefTab Then
+         OtherRefTabTxBl.Visibility = Visibility.Hidden
+         OtherRefTabBtn.Visibility = Visibility.Hidden
+         OtherRefTabChBx.Visibility = Visibility.Hidden
+         OtherRefTabBtn.IsEnabled = False
+      End If
       m_PrecActiveRawMode = m_ActiveRawMode
       If m_PrecActiveRawMode = RAWMODE.FROM_LASER Then
          m_ActiveRawMode = RAWMODE.DAMAGED_BY_LASER
@@ -1841,6 +1967,7 @@ Public Class RawPartPageUC
          WidthTxBx.Text = LenToString(m_RawWidth, 2)
          m_CurrProjPage.SetErrorMessage(EgtMsg(MSG_RAWPARTPAGEUC + 17) & " " & LenToString(dMaxWidth, 2))   'Massima larghezza =
       End If
+      RefTabModeChange()
    End Sub
 
    Private Sub HeightTxBx_EgtClosed(sender As Object, e As EventArgs) Handles HeightTxBx.EgtClosed
@@ -1870,6 +1997,7 @@ Public Class RawPartPageUC
          HeightTxBx.Text = LenToString(m_RawHeight, 3)
          m_CurrProjPage.SetErrorMessage(EgtMsg(MSG_RAWPARTPAGEUC + 18)) 'Non sono ammessi spessori negativi
       End If
+      RefTabModeChange()
    End Sub
 
    Private Sub OffsetXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffsetXTxBx.EgtClosed
@@ -1916,6 +2044,109 @@ Public Class RawPartPageUC
       End If
    End Sub
 
+#Region "OTHERREFTAB"
+
+   Private Sub OtherRefTabChBx_Click(sender As Object, e As EventArgs) Handles OtherRefTabChBx.Click
+      If OtherRefTabChBx.IsChecked Then
+         m_bOtherRefTab = True
+         MoveRawToOtherRefTab()
+      Else
+         m_bOtherRefTab = False
+         'MoveRawToMaiRefTab()
+      End If
+      UpdateOffsetText()
+      RawModeView()
+      WritePrivateProfileString(S_RAWPART, K_OTHERREFTAB, If(m_bOtherRefTab, "1", "0"), m_MainWindow.GetIniFile())
+   End Sub
+
+   Public Sub RefTabModeChange()
+      If Not m_bOtherRefTab Then Return
+      MoveRawToMaiRefTab()
+      MoveRawToOtherRefTab()
+      UpdateRefTabDraw()
+      UpdateOffsetText()
+   End Sub
+
+   Public Sub UpdateRefTabDraw()
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nOtherRefTabLay)
+      ' Acquisisco punto da disegno
+      m_OtherRefTabPoint = New Point3d(m_ptTableMin.x + m_OtherRefTabX, m_ptTableMin.y + m_OtherRefTabY, m_ptTableMin.z + 0.15)
+      CreateOtherRefTab(m_nOtherRefTabLay, m_OtherRefTabPoint)
+      EgtDraw()
+   End Sub
+
+   Private Sub UpdateOffsetText()
+      Dim ptRawMin, ptRawMax As Point3d
+      Dim dInvertKerf As Double = 1
+      If GetRawBox(ptRawMin, ptRawMax) Then
+         ' kerf
+         EgtGetInfo(EgtGetFirstRawPart(), KEY_KERF, m_RawKerf)
+         ' verifico se il kerf è negativo
+         EgtGetInfo(EgtGetFirstRawPart(), KEY_INVERT_KERF, dInvertKerf)
+         ' aggiorno dati grezzo
+         If dInvertKerf < 0 Then
+            m_RawOffsX = ptRawMin.x - m_ptTableMin.x
+            m_RawOffsY = ptRawMin.y - m_ptTableMin.y
+         Else
+            m_RawOffsX = ptRawMin.x - m_ptTableMin.x + m_RawKerf * dInvertKerf
+            m_RawOffsY = ptRawMin.y - m_ptTableMin.y + m_RawKerf * dInvertKerf
+         End If
+         OffsetXTxBx.Text = LenToString(m_RawOffsX, 2)
+         OffsetYTxBx.Text = LenToString(m_RawOffsY, 2)
+      End If
+   End Sub
+
+   Private Sub MoveRawToOtherRefTab()
+      Dim dKerf As Double = 0
+      StringToLen(KerfTxBx.Text, dKerf)
+      Select Case m_OtherRefTabPos
+         Case OTHERREFMODE.BL
+            m_RawOffsX = m_OtherRefTabX + If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY + If((dKerf < 0), -dKerf, dKerf)
+         Case OTHERREFMODE.BR
+            m_RawOffsX = m_OtherRefTabX - m_RawLength - If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY + If((dKerf < 0), -dKerf, dKerf)
+         Case OTHERREFMODE.TR
+            m_RawOffsX = m_OtherRefTabX - m_RawLength - If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY - m_RawWidth - If((dKerf < 0), -dKerf, dKerf)
+         Case OTHERREFMODE.TL
+            m_RawOffsX = m_OtherRefTabX + If((dKerf < 0), -dKerf, dKerf)
+            m_RawOffsY = m_OtherRefTabY - m_RawWidth - If((dKerf < 0), -dKerf, dKerf)
+         Case Else
+      End Select
+      UpdateRawPart()
+   End Sub
+
+   Private Sub MoveRawToMaiRefTab()
+      Dim dKerf As Double = 0
+      StringToLen(KerfTxBx.Text, dKerf)
+      Select Case m_OtherRefTabPos
+         Case OTHERREFMODE.BR
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case OTHERREFMODE.BL
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case OTHERREFMODE.TL
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case OTHERREFMODE.TR
+            m_RawOffsX = If((dKerf < 0), 0, dKerf)
+            m_RawOffsY = If((dKerf < 0), 0, dKerf)
+         Case Else
+      End Select
+      UpdateRawPart()
+   End Sub
+
+   Private Sub OtherRefTabBtn_Click(sender As Object, e As EventArgs) Handles OtherRefTabBtn.Click
+      ' apro la finestra per gestire il riferimento
+      Dim OthWD As New OtherRefTabWD(m_MainWindow, LenToString(m_OtherRefTabX, 2), LenToString(m_OtherRefTabY, 2), m_RawOffsX, m_RawOffsY, m_OtherRefTabPos)
+      OthWD.ShowDialog()
+   End Sub
+
+#End Region    ' OtherRefTab
+
    Private Sub KerfTxBx_EgtClosed(sender As Object, e As EventArgs) Handles KerfTxBx.EgtClosed
       Dim dKerf As Double
       If Not StringToLen(KerfTxBx.Text, dKerf) Then
@@ -1958,6 +2189,8 @@ Public Class RawPartPageUC
          Else
             CreateRawFromPhotoContour()
          End If
+         ' Forzo il riposizionamento del grezzo
+         RefTabModeChange()
          ' Ridisegno
          EgtDraw()
       ElseIf dKerf >= dMinKerf And dKerf < 0 Then
@@ -2020,6 +2253,8 @@ Public Class RawPartPageUC
          Else
             CreateRawFromPhotoContour()
          End If
+         ' Forzo il riposizionamento del grezzo
+         RefTabModeChange()
          ' Ridisegno
          EgtDraw()
       ElseIf dKerf < dMinKerf Then
@@ -2050,6 +2285,18 @@ Public Class RawPartPageUC
       ' Recupero origine tavola rispetto allo 0 macchina
       Dim TableRef As Point3d
       EgtGetTableRef(1, TableRef)
+      ' imposto modo automatico
+      Select Case m_MainWindow.m_CNCommunication.m_nNCType
+         Case 1, 2
+            ' in attesa di verifica 
+         Case 3
+            Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(0)
+            EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+         Case 4
+            ' FANUC - Manual:7, Edit:1
+            Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(7)
+            EgtOutLog("Impostata modalità manuale: esito " & nResult.ToString)
+      End Select
       ' Recupero file LUA
       EgtLuaExecFile(m_CurrentMachine.sMachDir() & "\DirectCmd\RawProbing.lua")
       ' Imposto parametri
@@ -2087,6 +2334,11 @@ Public Class RawPartPageUC
       End If
       m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
       EgtOutLog("RawProbing : sent NC program")
+      ' Se fanuc passo in modalità AUTO e attivo
+      If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+         Dim nResult As Short = m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_WriteCncMode(0)
+         EgtOutLog("Impostata modalità automatica: esito " & nResult.ToString)
+      End If
       ' Aspetto e lo avvio
       System.Threading.Thread.Sleep(300)
       m_MainWindow.m_CNCommunication.m_CN.DGeneralFunctions_CycleStart()
@@ -2152,6 +2404,10 @@ Public Class RawPartPageUC
                Else
                   RawThickness *= ONEMM / 1000
                End If
+               ' Se fanuc il dato è in mm (NON MICRON)
+               If m_MainWindow.m_CNCommunication.m_nNCType = 4 Then
+                  RawThickness *= 1000
+               End If
                ' Sottraggo eventuale spessore sovratavola
                RawThickness -= m_CurrentMachine.dAdditionalTable
                ' Imposto spessore misurato come altezza grezzo
@@ -2244,6 +2500,7 @@ Public Class RawPartPageUC
    Private Sub RawPartPage_Unloaded(sender As Object, e As RoutedEventArgs)
       ' Rimuovo layer temporaneo per crocette
       EgtErase(m_nTempLay)
+      EgtErase(m_nOtherRefTabLay)
       ' Dichiaro pagina non attiva
       m_bActive = False
    End Sub
@@ -2559,4 +2816,44 @@ Public Class RawPartPageUC
       Return True
    End Function
 
+   Private Function CreateOtherRefTab(nLayerId As Integer, ptP As Point3d) As Boolean
+      EgtEmptyGroup(m_nOtherRefTabLay)
+      If Not m_bOtherRefTab Or Not OtherRefTabChBx.IsEnabled Then
+         EgtDraw()
+         Return False
+      End If
+
+      If File.Exists(m_MainWindow.GetResourcesDir() & "\" & "RefTabBL.nge") Then
+         ' Aggiungo disegno staffa fermo pezzo
+         EgtInsertFile(m_MainWindow.GetResourcesDir() & "\" & "RefTabBL.nge")
+         Dim nLastPart As Integer = EgtGetLastPart()
+         Dim Lay As Integer = EgtGetFirstInGroup(nLastPart)
+         Dim Ent As Integer = EgtGetFirstInGroup(Lay)
+         While Ent <> -1
+            Dim NextEnt As Integer = EgtGetNext(Ent)
+            EgtRelocate(Ent, nLayerId)
+            EgtMove(Ent, ptP - Point3d.ORIG)
+            EgtRotate(Ent, ptP, Vector3d.Z_AX, 90 * m_OtherRefTabPos)
+            Ent = NextEnt
+         End While
+         EgtErase(nLastPart)
+      Else
+         ' Aggiungo crocette
+         ptP += New Vector3d(0, 0, 0.15)
+         Dim vtCrossX As New Vector3d(100, 0, 0)
+         Dim vtCrossY As New Vector3d(0, 100, 0)
+         Dim vtCrossZ As New Vector3d(0, 0, 100)
+         Dim nCrossId1 = EgtCreateLine(nLayerId, ptP, ptP + vtCrossX)
+         EgtSetColor(nCrossId1, New Color3d(245, 0, 0))
+         Dim nCrossId2 = EgtCreateLine(nLayerId, ptP, ptP + vtCrossY)
+         EgtSetColor(nCrossId2, New Color3d(0, 245, 0))
+         Dim nCrossId3 = EgtCreateLine(nLayerId, ptP, ptP + vtCrossZ)
+         EgtSetColor(nCrossId3, New Color3d(0, 0, 245))
+      End If
+
+      EgtDraw()
+      'EgtSaveFile("C:\EgtData\OmagCUT\Temp\MyTest.nge", NGE.BIN)
+      Return True
+   End Function
+
 End Class

Simulation/SimulationPageUC.xaml.vb

@@ -567,6 +567,16 @@ Public Class SimulationPageUC
    End Sub
 
    Private Sub GenerateXPIUC_Click(sender As Object, e As RoutedEventArgs)
+      ' eventualmente fermo la simulazione
+      m_nStatus = MCH_SIM_ST.UI_STOP
+      m_bPlay = False
+      PlayPauseBtn_Click(Nothing, Nothing)
+
+      ' se il bottone Shift è premuto apro il file CadCut1 nel programma NotePad
+      Dim IsPressedShiftKey As Boolean = False
+      If Keyboard.Modifiers And ModifierKeys.Shift Then
+         IsPressedShiftKey = True
+      End If
       Dim bOk As Boolean = True
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Elimino eventuale attrezzaggio da OmagOFFICE
@@ -669,6 +679,26 @@ Public Class SimulationPageUC
       Else
          m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
       End If
+      ' procedo all'apertura del file CadCut1 apenna generato (solo se generazione corretta)
+      If bOk And IsPressedShiftKey Then
+         Try
+            Process.Start("Notepad.exe", sCncPath)
+         Catch ex As Exception
+            EgtOutLog(ex.ToString)
+         End Try
+      End If
+      ' ricarico la pagina di simulazione
+      EgtSetCurrPhase(1)
+      ' nascondo i pezzi in parcheggio
+      HideParkedParts(True)
+      ' Avvio ambiente di simulazione
+      EgtSimInit()
+      EgtSimStart()
+      ' Imposto stato corrente
+      SetStatus(MCH_SIM_ST.UI_STOP)
+      m_bPlay = True
+      ' Costringo ad aggiornare UI
+      UpdateUI()
    End Sub
 
    Private Function ProcessEvents(nProg As Integer, nPause As Integer) As Integer

Utility/Utility.vb

@@ -1,5 +1,8 @@
 Imports System.Globalization
+Imports System.Diagnostics
 Imports System.Collections.ObjectModel
+Imports System.Text.RegularExpressions
+Imports EgtWPFLib
 Imports EgtUILib
 
 Module Utility
@@ -15,8 +18,25 @@ Module Utility
    End Function
 
 
-   '--------------------------------------------------------------------------------------------------
-   Friend Sub UpdateUI()
+    Friend StopWatch As Stopwatch
+
+   Friend Sub TimeSpanInit()
+      StopWatch = New Stopwatch
+      StopWatch.Start()
+   End Sub
+
+   Friend Function TimeSpanEnd()
+        Dim sTime As String = ""
+        If Not IsNothing(StopWatch) Then
+            StopWatch.Stop()
+            Dim ts As TimeSpan = StopWatch.Elapsed
+            sTime = String.Format("{0:00}:{1:00}:{2:00}.{3:000}", ts.Hours, ts.Minutes, ts.Seconds, ts.Milliseconds)
+        End If
+        Return sTime
+    End Function
+
+    '--------------------------------------------------------------------------------------------------
+    Friend Sub UpdateUI()
       ' Costringo ad aggiornare UI
       Dim nDummy As Integer
       Application.Current.Dispatcher.Invoke(Windows.Threading.DispatcherPriority.Background, _
@@ -24,6 +44,144 @@ Module Utility
    End Sub
 
    '--------------------------------------------------------------------------------------------------
+#Region "INCHES FRACTIONS"
+   'Enum FractionPattern
+   '   None
+   '   Feet_Inches
+   '   Inches
+   'End Enum
+
+   '' seleziona il tipo di Pattern con cui stamoare i dati
+   Friend nCurrFractionPattern As FractionStringConverter.FractionPattern = FractionPattern.Feet_Inches
+   Friend dPrecision As Double = 64
+
+   'Friend Function StringFractionToStringDecimal(dVal As Double, dBase As Double) As String
+   '   Dim sSign As String = String.Empty
+   '   If dVal < 0 Then
+   '      sSign = "-"
+   '      dVal = Math.Abs(dVal)
+   '   End If
+   '   Dim sFraction As String = String.Empty
+   '   ' integer and decima part of the value
+   '   Dim dInteger As Double = Math.Floor(dVal)
+   '   Dim dFraction As Double = dVal - dInteger
+   '   ' the nearest decimal numerator  
+   '   Dim dNumeretor As Double = dFraction * dBase
+   '   Dim dRound As Double = Math.Round(dNumeretor)
+   '   ' estimates the irreducible fraction
+   '   If dRound = 0 Then
+   '      ' no decimal part
+   '   ElseIf dRound = dBase Then
+   '      ' no decimal part
+   '      dInteger = dInteger + 1
+   '   Else
+   '      ' simplify fraction
+   '      While dRound Mod 2 = 0
+   '         dRound = dRound / 2
+   '         dBase = dBase / 2
+   '      End While
+   '      sFraction = DoubleToString(dRound, 0) & "/" & DoubleToString(dBase, 0)
+   '   End If
+   '   ' sVal: dFeet'dInteger"sFraction --- dInteger sFraction
+   '   Return WriteFraction(dInteger, sFraction)
+   'End Function
+
+   '' trasforma il valore da pollici a piedi
+   'Private Sub ConvertInchesToFeet(ByRef dFeet As Double, ByRef dInches As Double)
+   '   If dInches = 0 Then Return
+   '   While dInches - 12 >= 0
+   '      dFeet = dFeet + 1
+   '      dInches = dInches - 12
+   '   End While
+   'End Sub
+
+   '' stampa dati in funzione del pattern dichiarato
+   'Private Function WriteFraction(ByVal dInches As Double, sFraction As String) As String
+   '   Dim sVal As String = String.Empty
+   '   Select Case nCurrFractionPattern
+   '      Case FractionPattern.Feet_Inches
+   '         Dim dFeet As Double = 0
+   '         ConvertInchesToFeet(dFeet, dInches)
+   '         If dFeet > 0 Then
+   '            sVal = String.Format("{0}'{1}""{2}", DoubleToString(dFeet, 0), DoubleToString(dInches, 0), sFraction).Trim
+   '         Else
+   '            sVal = String.Format("{0}""{1}", DoubleToString(dInches, 0), sFraction).Trim
+   '         End If
+   '      Case FractionPattern.Inches
+   '         sVal = DoubleToString(dInches, 0) & " " & sFraction
+   '         sVal = String.Format("{0}""{1}", DoubleToString(dInches, 0), sFraction).Trim
+   '   End Select
+   '   Return sVal
+   'End Function
+
+   '' riceve la stringa sorgente e restituisce la nuova strunga in formato decimale (senza eseguire conversioni di unità)
+   'Friend Function StringFractionToDouble(sVal As String, ByRef sValConverted As String) As Boolean
+   '   Dim dVal As Double = 0
+   '   ' dato in ingresso: sVal = 2'3"23/32
+   '   Dim sFeet As String = String.Empty
+   '   Dim sFeetPattern As String = "^.*?(?=')"
+   '   Dim dFeet As Double = 0
+   '   Dim bOkFeet As Boolean = True
+   '   Dim bFeetExists As Boolean = False
+   '   Dim sInch As String = String.Empty
+   '   Dim sInchPattern As String = "(?<=')(.*?)(?="")"   ' se la stringa contiene l'apice singolo
+   '   Dim sInchPattern1 As String = "(.*?)(?="")"        ' se la stringa NON contiene l'apice singolo
+   '   Dim dInch As Double = 0
+   '   Dim bOkInch As Boolean = True
+   '   Dim bInchExists As Boolean = False
+   '   Dim sFraction As String = String.Empty
+   '   Dim sFractionPattern As String = "(?<="")(.*)"      ' se la stringa contiene l'apice doppio
+   '   Dim sFractionPattern1 As String = "(?<=')(.*)"      ' se la stringa NON contiene l'apice doppio ma solo quello singolo
+   '   Dim dFraction As Double = 0
+   '   Dim bOkFraction As Boolean = True
+   '   Dim bFractionExists As Boolean = False
+
+   '   ' recupero il valore di Feet (2')
+   '   Dim sMyMatch As String = Regex.Match(sVal, sFeetPattern).Groups(1).Value
+   '   If Not String.IsNullOrEmpty(sMyMatch) Or Not String.IsNullOrWhiteSpace(sMyMatch) Then
+   '      sFeet = sMyMatch.Trim
+   '      bOkFeet = StringToDouble(sFeet, dFeet)
+   '      bFeetExists = True
+   '   End If
+
+   '   ' recupero il valore di Inch (3") dopo i Feet - oppure direttamente i pollici
+   '   If bFeetExists Then
+   '      sMyMatch = Regex.Match(sVal, sInchPattern).Groups(1).Value
+   '   Else
+   '      sMyMatch = Regex.Match(sVal, sInchPattern1).Groups(1).Value
+   '   End If
+   '   If Not String.IsNullOrEmpty(sMyMatch) Or Not String.IsNullOrWhiteSpace(sMyMatch) Then
+   '      sInch = sMyMatch.Trim
+   '      bOkInch = StringToDouble(sInch, dInch)
+   '      bInchExists = True
+   '   End If
+
+   '   ' recupero il valore frazionario (23/32) dopo i pollici - oppure dopo i feet - oppure direttamente i valore inteso come pollici
+   '   If bInchExists Then
+   '      sMyMatch = Regex.Match(sVal, sFractionPattern).Groups(1).Value
+   '   ElseIf bFeetExists And Not bInchExists Then
+   '      sMyMatch = Regex.Match(sVal, sFractionPattern1).Groups(1).Value
+   '   ElseIf Not bFeetExists And Not bInchExists Then
+   '      sMyMatch = sVal
+   '   End If
+   '   If Not String.IsNullOrEmpty(sMyMatch) Or Not String.IsNullOrWhiteSpace(sMyMatch) Then
+   '      sFraction = sMyMatch
+   '      bOkFraction = StringToDouble(sFraction, dFraction)
+   '   End If
+
+   '   ' calcolo il valore decimale dell'espressione
+   '   If bOkFeet And bOkInch And bOkFraction Then
+   '      dVal = dFeet / 12 + dInch + dFraction
+   '      sValConverted = DoubleToString(dVal, 4)
+   '      Return True
+   '   Else
+   '      Return False
+   '   End If
+   'End Function
+
+#End Region    ' Inches Fraction
+   '--------------------------------------------------------------------------------------------------
+
    Friend Function DoubleToString(dVal As Double, nNumDec As Integer) As String
       Dim sFormat As String = "F" + Math.Abs(nNumDec).ToString()
       Dim sVal As String = dVal.ToString(sFormat, CultureInfo.InvariantCulture)
@@ -46,12 +204,28 @@ Module Utility
       Return True
    End Function
 
-   Friend Function LenToString(dVal As Double, nNumDec As Integer) As String
-      Return DoubleToString(EgtToUiUnits(dVal), nNumDec)
+   ' conerte il dato (in mm) in stringa nell'unità corrente
+   Friend Function LenToString(dVal As Double, nNumDec As Integer, Optional ByVal bForceToDecimal As Boolean = False) As String
+      Dim sVal As String = DoubleToString(EgtToUiUnits(dVal), nNumDec)
+      ' se richiesta scrittura in frazione (solo se unità corrente INCHES)
+      If (nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM()) And Not bForceToDecimal Then
+         ' conevrto il dato corrente in decimale
+         Dim dCurrVal As Double = dVal
+         StringToDouble(sVal, dCurrVal)
+         Return DoubleToStringFraction(dCurrVal, dPrecision)
+      End If
+      Return sVal
    End Function
 
-   Friend Function StringToLen(sVal As String, ByRef dVal As Double) As Boolean
+   Friend Function StringToLen(sVal As String, ByRef dVal As Double, Optional ByVal bForceToDecimal As Boolean = False) As Boolean
       If String.IsNullOrEmpty(sVal) Then Return False
+
+      If (nCurrFractionPattern <> FractionPattern.None And Not EgtUiUnitsAreMM()) And Not bForceToDecimal Then
+         Dim sValSource As String = sVal
+         ' conevrto la stringa in formato decimale (sempre in stringa)
+         StringFractionToStringDecimal(sValSource, sVal)
+      End If
+
       If EgtLuaEvalNumExpr(sVal, dVal) Then
          dVal = EgtFromUiUnits(dVal)
          Return True
@@ -373,4 +547,40 @@ Module Utility
       End If
    End Sub
 
+   Public Sub GetMillFromMilling(ByRef sCurrMill As String, ByVal sCurrMilling As String)
+      If String.IsNullOrEmpty(sCurrMill) Or String.IsNullOrWhiteSpace(sCurrMill) Then
+         ' creo l'elenco degli utensili di foratura
+         Dim sToolName As String = String.Empty
+         Dim nType As Integer = MCH_TY.NONE
+         Dim MillToolList As New ObservableCollection(Of String)
+         MillToolList.Clear()
+         If EgtTdbGetFirstTool(MCH_TF.MILL, sToolName, nType) Then
+            MillToolList.Add(sToolName)
+            While EgtTdbGetNextTool(MCH_TF.MILL, sToolName, nType)
+               MillToolList.Add(sToolName)
+            End While
+         End If
+         ' recupero l'utensile associato alla lavorazione
+         'Dim sCurrDrilling As String = m_MainWindow.m_CurrentMachine.sCurrDrilling
+         Dim ToolString As String = String.Empty
+         EgtMdbSetCurrMachining(sCurrMilling)
+         ' Recupero nome utensile tramite TUUID
+         Dim sTuuid As String = String.Empty
+         EgtMdbGetCurrMachiningParam(MCH_MP.TUUID, sTuuid)
+         EgtTdbGetToolFromUUID(sTuuid, ToolString)
+         Dim bToolExist As Boolean = False
+         For Each CurrTool As IEnumerable In MillToolList
+            If CurrTool.ToString() = ToolString Then
+               bToolExist = True
+               Exit For
+            End If
+         Next
+         If bToolExist Then
+            sCurrMill = ToolString
+         Else
+            sCurrMill = String.Empty
+         End If
+      End If
+   End Sub
+
 End Module