Merge remote-tracking branch 'origin/master' into ProbingWithTool

- Aggiunto solido collisione a NGE

Beam/MachiningTypes.ini

@@ -49,3 +49,6 @@
 
 [Sawing]
 1=Sawing
+
+[Probing]
+1=DTMortise

Beam/ProbingData.lua

@@ -0,0 +1,11 @@
+-- Probingata.lua by Egaltech s.r.l.   20/06/2025
+-- Gestione dati lavorazioni per Travi
+
+-- Tabella per definizione modulo
+local ProbingData = {
+   { On = true, Name = 'Probing_H1', Type = 'DTMortise'},
+   { On = true, Name = 'Probing_H2', Type = 'DTMortise'}
+}
+
+---------------------------------------------------------------------
+return ProbingData

Common_ONE-PF.NUM.mlpe

@@ -27,7 +27,7 @@ function OnStart()
    --EMT.LINEINC = 1        -- incremento numerazione linee
    --EMT.Ft = 'F'           -- token per feed
    --EMT.St = 'S'           -- token per speed
-   EMT.FMAXPINZE = EgtClamp( MaxFeedPinze or 102000, 20000, 102000)  -- feed massima pinze
+   EMT.FMAXPINZE = EgtClamp( MaxFeedPinze or 102000, 20000, 155000)  -- feed massima pinze
    EMT.MAXACC = MaxAcc or ( EMT.FMAXPINZE / ( 60 * 0.3))  -- accelerazione massima pinze
    EMT.MINACC = MinAcc or ( EMT.FMAXPINZE / ( 60 * 4))    -- accelerazione minima pinze
 
@@ -419,6 +419,7 @@ function OnToolSelect()
       if MCH_TP.DIST then EMT.TDIST = EgtTdbGetCurrToolParam( MCH_TP.DIST) end
       if EMT.TDIST and abs( EMT.TDIST) < 0.1 then EMT.TDIST = nil end
       EMT.TUSERNOTES = EgtTdbGetCurrToolParam( MCH_TP.USERNOTES)
+      EMT.ISPROBING = HeadIsProbe( EMT.HEAD)
    end
 end
 
@@ -452,6 +453,7 @@ function OnMachiningStart()
       local MyParkCSawC2 = GetChainSawCHomeFromVirtualAxis( dPosA)
       EmtModifyAxisHome( 'C2', MyParkCSawC2)
    end
+
    -- gestione eventuale lavorazione in doppio
    local nDouType = EgtGetValInNotes( EMT.MCHUSERNOTES, 'DOUBLE', 'i')
    if nDouType == 2 or nDouType == 3 then
@@ -819,8 +821,8 @@ function OnRapid()
       EMT.IPLGL = false
       MyAdjustLinearAxes()
       EmtAdjustRotaryAxes()
-      local HomeR1 = EgtGetAxisHomePos( EgtIf( nHSet == 1, 'C1', 'C2'))
-      local HomeR2 = EgtGetAxisHomePos( EgtIf( nHSet == 1, 'B1', 'B2'))
+      local HomeR1 = EgtGetAxisHomePos( EgtIf( nHSet == 1 or nHSet == 11, 'C1', 'C2'))
+      local HomeR2 = EgtGetAxisHomePos( EgtIf( nHSet == 1 or nHSet == 11, 'B1', 'B2'))
       local PrevR1 = EMT.R1p or EMT.R1pp or HomeR1
       local PrevR2 = EMT.R2p or EMT.R2pp or HomeR2
       EmtResetPrev()
@@ -830,6 +832,101 @@ function OnRapid()
             EMT.L3 = EMT.L3s
          end
       end
+
+      -- se tastatore
+      if EMT.ISPROBING then
+         local nSetHead = GetHeadSet( EMT.HEAD)
+         local bIsFirstHead = ( nSetHead == 1 or nSetHead == 11)
+         local idProbeMachining = EMT.MCHID
+         local bFound = false
+         local nProbeHead = GetHeadSet( EMT.HEAD)
+         local idProbeNextMachining = EgtGetNextActiveOperation( idProbeMachining)
+         while not bFound do
+            if idProbeNextMachining then
+               EgtSetCurrMachining( idProbeNextMachining)
+               local sToolNameNextProbe = EgtGetMachiningParam( MCH_MP.TOOL)
+               if sToolNameNextProbe then
+                  local sToolHeadNextProbe, sToolTcPosNextProbe = GetToolHead( sToolNameNextProbe)
+                  local nToolHead = GetHeadSet( sToolHeadNextProbe)
+                  -- se sono sulla stessa testa
+                  if bIsFirstHead and nProbeHead == 11 then
+                     EMT.PROBENEXTTOOL_H1 = sToolNameNextProbe
+                     EMT.PROBENEXTHEAD_H1 = sToolHeadNextProbe
+                     EMT.PROBENEXTTCPOS_H1 = sToolTcPosNextProbe
+                     bFound = true
+                  elseif not bIsFirstHead and nProbeHead == 21 then
+                     EMT.PROBENEXTTOOL_H2 = sToolNameNextProbe
+                     EMT.PROBENEXTHEAD_H2 = sToolHeadNextProbe
+                     EMT.PROBENEXTTCPOS_H2 = sToolTcPosNextProbe
+                     bFound = true
+                  end
+               end
+            else
+               break
+            end
+            idProbeNextMachining = EgtGetNextActiveOperation( idProbeNextMachining)
+         end
+         -- ripristino lavorazione corrente
+         EgtSetCurrMachining( EMT.MCHID)
+
+         local bChanged = true
+         if bIsFirstHead then
+            -- se prossimo utensile compatibile, lo prelevo
+            if IsToolCompatibleWithProbe( EMT.PROBENEXTTOOL_H1, EMT.TOOL) then
+               EMT.TCPOS = EMT.PROBENEXTTCPOS_H1
+               EMT.HEAD = EMT.PROBENEXTHEAD_H1
+               EMT.TOOL = EMT.PROBENEXTTOOL_H1
+            else
+               -- se vecchio utensile compatibile, tengo quello caricato
+               if IsToolCompatibleWithProbe( EMT.PREVTOOL_H1, EMT.TOOL) then
+                  bChanged = false
+                  EMT.TCPOS = EMT.PREVTCPOS_H1
+                  EMT.HEAD = EMT.PREVHEAD_H1
+                  EMT.TOOL = EMT.PREVTOOL_H1
+               -- altrimenti si seleziona utensile di default
+               else
+                  ExecMoveZmax( EMT.MCHSPLIT, true)
+                  EMT.TCPOS = DefTcPos1
+                  EMT.TOOL = GetToolNameFromTcPos( DefTcPos1)
+                  EMT.HEAD, _ = GetToolHead( EMT.TOOL)
+               end
+            end
+            -- se cambiato utensile, si setta subito nome precedente
+            if bChanged then
+               EMT.PREVTOOL_H1 = EMT.TOOL
+               EMT.PREVHEAD_H1 = EMT.HEAD
+               EMT.PREVTCPOS_H1 = EMT.TCPOS
+            end
+         else
+            -- se prossimo utensile compatibile, lo prelevo
+            if IsToolCompatibleWithProbe( EMT.PROBENEXTTOOL_H2, EMT.TOOL) then
+               EMT.TCPOS = EMT.PROBENEXTTCPOS_H2
+               EMT.HEAD = EMT.PROBENEXTHEAD_H2
+               EMT.TOOL = EMT.PROBENEXTTOOL_H2
+            else
+               -- se vecchio utensile compatibile, tengo quello caricato
+               if IsToolCompatibleWithProbe( EMT.PREVTOOL_H2, EMT.TOOL) then
+                  bChanged = false
+                  EMT.TCPOS = EMT.PREVTCPOS_H2
+                  EMT.HEAD = EMT.PREVHEAD_H2
+                  EMT.TOOL = EMT.PREVTOOL_H2
+               -- altrimenti si seleziona utensile di default
+               else
+                  ExecMoveZmax( EMT.MCHSPLIT, true)
+                  EMT.TCPOS = DefTcPos2
+                  EMT.TOOL = GetToolNameFromTcPos( DefTcPos2)
+                  EMT.HEAD, _ = GetToolHead( EMT.TOOL)
+               end
+            end
+            -- se cambiato utensile, si setta subito nome precedente
+            if bChanged then
+               EMT.PREVTOOL_H2 = EMT.TOOL
+               EMT.PREVHEAD_H2 = EMT.HEAD
+               EMT.PREVTCPOS_H2 = EMT.TCPOS
+            end
+         end
+      end
+
       -- se prima lavorazione
       if EMT.LOAD then
          EMT.V2POS = ParkV2
@@ -1162,8 +1259,8 @@ function OnRapid()
             EMT.TO_XHOME = nil
             EMT.L1pp = nil
             EMT.L3pp = nil
-            PrevR1 = EgtGetAxisHomePos( EgtIf( nHSet == 1, 'C1', 'C2'))
-            PrevR2 = EgtGetAxisHomePos( EgtIf( nHSet == 1, 'B1', 'B2'))
+            PrevR1 = EgtGetAxisHomePos( EgtIf( nHSet == 1 or nHSet == 11, 'C1', 'C2'))
+            PrevR2 = EgtGetAxisHomePos( EgtIf( nHSet == 1 or nHSet == 11, 'B1', 'B2'))
          end
          -- calcolo Movimento Pinze (potrebbe richiedere movimento testa in Home)
          for i = 1, #EMT.AUXCMD do
@@ -1178,7 +1275,7 @@ function OnRapid()
                local nPrevHSet = GetHeadSet( EMT.PREVHEAD)
                -- vado in parcheggio sempre con utensile precedente
                if not HeadIsChainSaw( EMT.PREVHEAD) then
-                  if nPrevHSet == 1 then
+                  if nPrevHSet == 1 or nPrevHSet == 11 then
                      local HomeX1 = EgtGetAxisHomePos( 'X1')
                      EmitMoveDataHead( 1, { X=-EMT.PREVHOMEX_H1, Z=MaxZ1, B=EMT.PREVHOMEB_H1, C=EMT.PREVHOMEC_H1, TPos=AdjustTcPos( false, EMT.PREVTCPOS_H1)})
                      EmitMoveStartHead( 1, 'EA1')
@@ -1529,81 +1626,89 @@ function OnRapid()
       EMT.ZMAX = false
    -- se standard
    elseif EMT.FLAG == 0 or EMT.FLAG == 1 or EMT.FLAG == 2 then
-      local sPostMove = ''
-      if EMT.MCHFIRST then
-         local sOut = string.gsub( string.gsub( EMT.MCHNAME..'/'..EMT.TOOL, '%(', '['), '%)', ']')
-         if EMT.DOU_TYPE then sOut = sOut .. ' Double' end
-         EmtOutput( '( *** '..sOut..' *** )')
-         -- gestione comandi rulli
-         local sPreMove = ''
-         if GetV1ToCloseNum( true) then
-            sPostMove = ' EC-3'
-         else
-            sPreMove = ' EC3'
-         end
-         if GetV2ToCloseNum( true) then
-            sPostMove = sPostMove .. ' ED-3'
-         else
-            sPreMove = sPreMove .. ' ED3'
-         end
-         -- comandi rulli prima di movimento (aperture)
-         if #sPreMove > 0 then
-            EmtOutput( 'G157 EA2' .. sPreMove)
-         end
-         -- se taglio di coda senza residuo da scaricare, emetto M175 per accelerare il carico della barra successiva
-         if EMT.MCHUSERNOTES and EMT.MCHUSERNOTES:find( 'Cut', 1, true) then
-            EmtOutput( 'M175')
-         end
-         EMT.MCHFIRST = false
-         EMT.PLANEACTIVE = true
-      end
-      -- se necessario, impostazione riferimento locale
-      if EMT.REFLOC == 0 then
-         -- se lavorazione in doppio
-         if EMT.DOU_TYPE == 2 then
-            -- aggiusto assi
-            EMT.L2 = -EMT.L2
-            -- emetto movimenti in Zero macchina
-            local Speed = EMT.S * EgtIf( EMT.HEAD ~= 'H12', 1, 1.65)
-            EmitMoveDataHead( 1, { X=EMT.L2, Z=EMT.L3, B=EMT.R2, C=EMT.R1, S=Speed})
-            EmitMoveStartHead( 1)
-            local dX2 = - ( Delta2TabY - EMT.DOU_TLEN - ( -DeltaTabY - EMT.L2 - EMT.TLEN + EgtIf( BD.RIGHT_LOAD, -EMT.HB, EMT.HB)))
-            local dZ2 = -Head2Z + MillOffs - Mill2Offs + EMT.L3
-            local dC2 = -EMT.R1
-            local dB2 = -EMT.R2
-            EmitMoveDataHead( 2, { X=dX2, Z=dZ2, B=dB2, C=dC2, TPos=EMT.DOU_TPOS, S=EMT.DOU_SPEED})
-            EmitMoveStartHead( 2)
-            -- aspetto esecuzione movimento testa 2 e 1
-            EmitMoveWaitHead( 2)
-            EmitMoveWaitHead( 1)
-            -- ripristino assi
-            EMT.L2 = -EMT.L2
-         end
-         -- calcolo per piano generico
-         CalcInterpPlane()
-         EMT.REFLOC = 1
-         -- trasformo i punti nel piano
-         MyAdjustLinearAxes()
-         EmtAdjustRotaryAxes()
-         EMT.L1p = nil
-         EMT.L2p = nil
-         EMT.L3p = nil
-         local sDouFlag = EgtIf( EMT.DOU_TYPE, ' EE1', '')
-         EmtOutput( 'G142'..EmtGetAxis('L1')..EmtGetAxis('L2')..EmtGetAxis('L3')..EMT.IPLGLSTR..EgtIf( nHSet~=2, ' EU1', ' EU2')..sDouFlag..' EF'..GetFmaxClamp())
-         -- forzo successiva emissione assi rotanti
-         EMT.R1p = nil
-         EMT.R2p = nil
+      if EMT.ISPROBING then
+         -- emetto movimenti in Zero macchina
+         EmitMoveDataHead( GetHeadSet( EMT.HEAD), { X=-EMT.L2, Z=EMT.L3, B=EMT.R2, C=EMT.R1, S=Speed})
+         EmitMoveStartHead( GetHeadSet( EMT.HEAD))
+         EmitMoveWaitHead( GetHeadSet( EMT.HEAD))
       else
-         MyAdjustLinearAxes()
-         EmtAdjustRotaryAxes()
+         local sPostMove = ''
+         if EMT.MCHFIRST then
+            local sOut = string.gsub( string.gsub( EMT.MCHNAME..'/'..EMT.TOOL, '%(', '['), '%)', ']')
+            if EMT.DOU_TYPE then sOut = sOut .. ' Double' end
+            EmtOutput( '( *** '..sOut..' *** )')
+            -- gestione comandi rulli
+            local sPreMove = ''
+            if GetV1ToCloseNum( true) then
+               sPostMove = ' EC-3'
+            else
+               sPreMove = ' EC3'
+            end
+            if GetV2ToCloseNum( true) then
+               sPostMove = sPostMove .. ' ED-3'
+            else
+               sPreMove = sPreMove .. ' ED3'
+            end
+            -- comandi rulli prima di movimento (aperture)
+            if #sPreMove > 0 then
+               EmtOutput( 'G157 EA2' .. sPreMove)
+            end
+            -- se taglio di coda senza residuo da scaricare, emetto M175 per accelerare il carico della barra successiva
+            if EMT.MCHUSERNOTES and EMT.MCHUSERNOTES:find( 'Cut', 1, true) then
+               EmtOutput( 'M175')
+            end
+            EMT.MCHFIRST = false
+            EMT.PLANEACTIVE = true
       end
-      -- emissione movimento
-      local sOut = 'G0'..EmtGetAxis('L1')..EmtGetAxis('L2')..EmtGetAxis('L3')..
-                   EmtGetAxis('R2')..EmtGetAxis('R1')
-      -- comandi rulli dopo movimento (chiusure)
-      EmtOutput( sOut)
-      if #sPostMove > 0 then
-         EmtOutput( 'G157 EA2' .. sPostMove)
+         -- se necessario, impostazione riferimento locale
+         if EMT.REFLOC == 0 then
+            -- se lavorazione in doppio
+            if EMT.DOU_TYPE == 2 then
+               -- aggiusto assi
+               EMT.L2 = -EMT.L2
+               -- emetto movimenti in Zero macchina
+               local Speed = EMT.S * EgtIf( EMT.HEAD ~= 'H12', 1, 1.65)
+               EmitMoveDataHead( 1, { X=EMT.L2, Z=EMT.L3, B=EMT.R2, C=EMT.R1, S=Speed})
+               EmitMoveStartHead( 1)
+               local dX2 = - ( Delta2TabY - EMT.DOU_TLEN - ( -DeltaTabY - EMT.L2 - EMT.TLEN + EgtIf( BD.RIGHT_LOAD, -EMT.HB, EMT.HB)))
+               local dZ2 = -Head2Z + MillOffs - Mill2Offs + EMT.L3
+               local dC2 = -EMT.R1
+               local dB2 = -EMT.R2
+               EmitMoveDataHead( 2, { X=dX2, Z=dZ2, B=dB2, C=dC2, TPos=EMT.DOU_TPOS, S=EMT.DOU_SPEED})
+               EmitMoveStartHead( 2)
+               -- aspetto esecuzione movimento testa 2 e 1
+               EmitMoveWaitHead( 2)
+               EmitMoveWaitHead( 1)
+               -- ripristino assi
+               EMT.L2 = -EMT.L2
+            end
+            -- calcolo per piano generico
+            CalcInterpPlane()
+            EMT.REFLOC = 1
+            -- trasformo i punti nel piano
+            MyAdjustLinearAxes()
+            EmtAdjustRotaryAxes()
+            EMT.L1p = nil
+            EMT.L2p = nil
+            EMT.L3p = nil
+            local sDouFlag = EgtIf( EMT.DOU_TYPE, ' EE1', '')
+            EmtOutput( 'G142'..EmtGetAxis('L1')..EmtGetAxis('L2')..EmtGetAxis('L3')..EMT.IPLGLSTR
+                             ..EgtIf( nHSet~=2 and nHSet~=22, ' EU1', ' EU2')..sDouFlag..' EF'..GetFmaxClamp())
+            -- forzo successiva emissione assi rotanti
+            EMT.R1p = nil
+            EMT.R2p = nil
+         else
+            MyAdjustLinearAxes()
+            EmtAdjustRotaryAxes()
+         end
+         -- emissione movimento
+         local sOut = 'G0'..EmtGetAxis('L1')..EmtGetAxis('L2')..EmtGetAxis('L3')..
+                     EmtGetAxis('R2')..EmtGetAxis('R1')
+         -- comandi rulli dopo movimento (chiusure)
+         EmtOutput( sOut)
+         if #sPostMove > 0 then
+            EmtOutput( 'G157 EA2' .. sPostMove)
+         end
       end
    -- se altrimenti risalita a Z max a fine lavorazione
    elseif EMT.FLAG == 3 then
@@ -1618,11 +1723,13 @@ function OnRapid()
                        ( EMT.HEAD == 'H12' and EMT.TOOL ~= sNextTool ) or ( EMT.HEAD == 'H22' and EMT.TOOL ~= sNextTool) or EMT.MCHSPLIT
       local CurrL3o = EMT.L3o
       EMT.L3o = EMT.L3op
-      EmitZmax( true, true, bToXhome, EMT.R1p, EMT.R2p, EMT.MCHSPLIT)
+      local bZMax = EmitZmax( true, true, bToXhome, EMT.R1p, EMT.R2p, EMT.MCHSPLIT)
       EMT.L3o = CurrL3o
       -- aggiorno quota finale trave dopo Zmax
       EMT.L1o = EMT.TPOS
-      EMT.ZMAX = true
+      if bZMax then
+         EMT.ZMAX = true
+      end
    -- se altrimenti movimento in Home
    elseif EMT.FLAG == 4 then
       -- non previsto
@@ -1637,86 +1744,111 @@ end
 
 ---------------------------------------------------------------------
 function OnLinear()
-   -- se necessario, impostazione riferimento locale
-   if EMT.REFLOC == 0 then
-      -- gruppo della testa
-      local nHSet = GetHeadSet( EMT.HEAD)
-      -- calcolo per piano generico
-      CalcInterpPlane()
-      EMT.REFLOC = 1
-      -- salvo posizione attuale
-      local OldL1 = EMT.L1
-      local OldL2 = EMT.L2
-      local OldL3 = EMT.L3
-      -- imposto posizione precedente (non contiene l'offset in X per sovramateriale di testa EMT.X_OFF)
-      EMT.L1 = EMT.L1o
-      EMT.L2 = EMT.L2o
-      EMT.L3 = EMT.L3o
-      -- trasformo i punti nel piano
+   -- se tastatore
+   if EMT.ISPROBING then
+      if not EMT.PROBE then
+         local p3FirstPoint = Point3d( EMT.L1, EMT.L2, EMT.L3)
+         local p3SecondPoint = Point3d( EMT.L1p, EMT.L2p, EMT.L3p)
+         local dProbingDist = dist( p3FirstPoint, p3SecondPoint) * 2
+         local vtE = Vector3d( EMT.EXTR)
+         local sFace, ProbePosZ
+         if AreSameVectorApprox( vtE, Y_AX()) then
+            sFace = EgtIf( BD.RIGHT_LOAD, 4, 2)
+         elseif AreSameVectorApprox( vtE, -Y_AX()) then
+            sFace = EgtIf( BD.RIGHT_LOAD, 2, 4)
+         elseif AreSameVectorApprox( vtE, Z_AX()) then
+            sFace = 3
+         else
+            error( "PROBING DIRECTION NOT MANAGED")
+         end
+         local sProbeHead = ' ET' .. GetHeadSet( EMT.HEAD)
+         EmtOutput( 'G145 Z-'.. EgtNumToString( dProbingDist).. ' EF'..sFace..sProbeHead)
+
+         -- tastatura attivata
+         EMT.PROBE = true
+      end
+   else
+      -- se necessario, impostazione riferimento locale
+      if EMT.REFLOC == 0 then
+         -- gruppo della testa
+         local nHSet = GetHeadSet( EMT.HEAD)
+         -- calcolo per piano generico
+         CalcInterpPlane()
+         EMT.REFLOC = 1
+         -- salvo posizione attuale
+         local OldL1 = EMT.L1
+         local OldL2 = EMT.L2
+         local OldL3 = EMT.L3
+         -- imposto posizione precedente (non contiene l'offset in X per sovramateriale di testa EMT.X_OFF)
+         EMT.L1 = EMT.L1o
+         EMT.L2 = EMT.L2o
+         EMT.L3 = EMT.L3o
+         -- trasformo i punti nel piano
+         MyAdjustLinearAxes()
+         EmtAdjustRotaryAxes()
+         EMT.L1p = nil
+         EMT.L2p = nil
+         EMT.L3p = nil
+         local sDouFlag = EgtIf( EMT.DOU_TYPE, ' EE1', '')
+         EmtOutput( 'G142'..EmtGetAxis('L1')..EmtGetAxis('L2')..EmtGetAxis('L3')..EMT.IPLGLSTR
+                          ..EgtIf( nHSet~=2 and nHSet~=22, ' EU1', ' EU2')..sDouFlag..' EF'..GetFmaxClamp())
+         -- emissione movimento
+         local sOut = 'G0'..EmtGetAxis('L1')..EmtGetAxis('L2')..EmtGetAxis('L3')..
+                     EmtGetAxis('R2')..EmtGetAxis('R1')
+         EmtOutput( sOut)
+         -- aggiorno precedenti
+         EMT.MOVE = 0
+         EmtUpdatePrev()
+         EMT.MOVE = 1
+         -- ripristino posizione attuale
+         EMT.L1 = OldL1
+         EMT.L2 = OldL2
+         EMT.L3 = OldL3
+      end
+
+      -- aggiustamento valori
       MyAdjustLinearAxes()
       EmtAdjustRotaryAxes()
-      EMT.L1p = nil
-      EMT.L2p = nil
-      EMT.L3p = nil
-      local sDouFlag = EgtIf( EMT.DOU_TYPE, ' EE1', '')
-      EmtOutput( 'G142'..EmtGetAxis('L1')..EmtGetAxis('L2')..EmtGetAxis('L3')..EMT.IPLGLSTR..EgtIf( nHSet~=2, ' EU1', ' EU2')..sDouFlag..' EF'..GetFmaxClamp())
-      EMT.PLANEACTIVE = true
-      -- emissione movimento
-      local sOut = 'G0'..EmtGetAxis('L1')..EmtGetAxis('L2')..EmtGetAxis('L3')..
-                   EmtGetAxis('R2')..EmtGetAxis('R1')
-      EmtOutput( sOut)
-      -- aggiorno precedenti
-      EMT.MOVE = 0
-      EmtUpdatePrev()
-      EMT.MOVE = 1
-      -- ripristino posizione attuale
-      EMT.L1 = OldL1
-      EMT.L2 = OldL2
-      EMT.L3 = OldL3
-   end
 
-   -- aggiustamento valori
-   MyAdjustLinearAxes()
-   EmtAdjustRotaryAxes()
-
-   -- se lavorazione in doppio e fondo foro, inverto movimento punta doppia
-   local bDouHoleBott = ( EMT.MCHTYPE == MCH_MY.DRILLING and EMT.DOU_TYPE == 2 and EMT.FLAG == 101)
-   if bDouHoleBott then
-      EmtOutput( "G157 EE-1")
-   end
-
-   -- valori degli assi
-   local sL1, bL1 = EmtGetAxis( 'L1')
-   local sL2, bL2 = EmtGetAxis( 'L2')
-   local sL3, bL3 = EmtGetAxis( 'L3')
-   local sR1, bR1 = EmtGetAxis( 'R1')
-   local sR2, bR2 = EmtGetAxis( 'R2')
-   local sAxes = sL1 .. sL2 .. sL3 .. sR2 .. sR1
-   -- se nulla da emettere, esco
-   if #sAxes == 0 then return end
-   -- arresto preciso in angoli di fresature per utensili (non penne) di piccolo diametro
-   local sSlowDown = ''
-   if EMT.MCHTYPE == MCH_MY.MILLING and EMT.TTOTDIAM < 15 and abs( EMT.S) > 1000 and ( bL1 or bL2) and not bL3 then
-      sSlowDown = ' G9'
-   end
-   -- aggiungo feed
-   local sFeed = EmtGetFeed()
-   -- emetto linea
-   EmtOutput( "G1"..sSlowDown..sAxes..sFeed)
-
-   -- se lavorazione in doppio e fondo foro, muovo punta 2 e poi ripristino movimento standard punta doppia
-   if bDouHoleBott then
-      if EMT.DOU_TYPE == 2 or EMT.DOU_TYPE == 3 then
-         local dZ = 2 * EMT.L3p - EMT.L3
-         EmtOutput( "G1 Z" .. EgtNumToString( dZ, 3)) 
-         EmtOutput( "G1 Z" .. EgtNumToString( EMT.L3p, 3))
+      -- se lavorazione in doppio e fondo foro, inverto movimento punta doppia
+      local bDouHoleBott = ( EMT.MCHTYPE == MCH_MY.DRILLING and EMT.DOU_TYPE == 2 and EMT.FLAG == 101)
+      if bDouHoleBott then
+         EmtOutput( "G157 EE-1")
       end
-      EmtOutput( "G157 EE1")
-   end
 
-   -- aggiorno valori come precedenti
-   EMT.TPOS = EMT.L1o
-   EmtUpdatePrev()
+      -- valori degli assi
+      local sL1, bL1 = EmtGetAxis( 'L1')
+      local sL2, bL2 = EmtGetAxis( 'L2')
+      local sL3, bL3 = EmtGetAxis( 'L3')
+      local sR1, bR1 = EmtGetAxis( 'R1')
+      local sR2, bR2 = EmtGetAxis( 'R2')
+      local sAxes = sL1 .. sL2 .. sL3 .. sR2 .. sR1
+      -- se nulla da emettere, esco
+      if #sAxes == 0 then return end
+      -- arresto preciso in angoli di fresature per utensili (non penne) di piccolo diametro
+      local sSlowDown = ''
+      if EMT.MCHTYPE == MCH_MY.MILLING and EMT.TTOTDIAM < 15 and abs( EMT.S) > 1000 and ( bL1 or bL2) and not bL3 then
+         sSlowDown = ' G9'
+      end
+      -- aggiungo feed
+      local sFeed = EmtGetFeed()
+      -- emetto linea
+      EmtOutput( "G1"..sSlowDown..sAxes..sFeed)
+
+      -- se lavorazione in doppio e fondo foro, muovo punta 2 e poi ripristino movimento standard punta doppia
+      if bDouHoleBott then
+         if EMT.DOU_TYPE == 2 or EMT.DOU_TYPE == 3 then
+            local dZ = 2 * EMT.L3p - EMT.L3
+            EmtOutput( "G1 Z" .. EgtNumToString( dZ, 3)) 
+            EmtOutput( "G1 Z" .. EgtNumToString( EMT.L3p, 3))
+         end
+         EmtOutput( "G157 EE1")
+      end
+
+      -- aggiorno valori come precedenti
+      EMT.TPOS = EMT.L1o
+      EmtUpdatePrev()
+   end
 end
 
 ---------------------------------------------------------------------
@@ -1743,8 +1875,8 @@ function OnArc()
       EMT.L2p = nil
       EMT.L3p = nil
       local sDouFlag = EgtIf( EMT.DOU_TYPE, ' EE1', '')
-      EmtOutput( 'G142'..EmtGetAxis('L1')..EmtGetAxis('L2')..EmtGetAxis('L3')..EMT.IPLGLSTR..EgtIf( nHSet~=2, ' EU1', ' EU2')..sDouFlag..' EF'..GetFmaxClamp())
-      EMT.PLANEACTIVE = true
+      EmtOutput( 'G142'..EmtGetAxis('L1')..EmtGetAxis('L2')..EmtGetAxis('L3')..EMT.IPLGLSTR
+                       ..EgtIf( nHSet~=2 and nHSet~=22, ' EU1', ' EU2')..sDouFlag..' EF'..GetFmaxClamp())
       -- emissione movimento
       local sOut = 'G0'..EmtGetAxis('L1')..EmtGetAxis('L2')..EmtGetAxis('L3')..
                    EmtGetAxis('R2')..EmtGetAxis('R1')
@@ -2464,12 +2596,13 @@ end
 
 ---------------------------------------------------------------------
 function GetDiffRotAxAtStart( R1, R2)
-   local HomeR1 = EgtGetAxisHomePos( EgtIf( nHSet == 1, 'C1', 'C2'))
+   local nHSet = GetHeadSet( EMT.HEAD)
+   local HomeR1 = EgtGetAxisHomePos( EgtIf( nHSet == 1 or nHSet == 11, 'C1', 'C2'))
    local PrevR1 = EMT.R1p or EMT.R1pp or HomeR1
    if not R1 or not PrevR1 or abs( R1 - PrevR1) > 0.1 then
       return true
    end
-   local HomeR2 = EgtGetAxisHomePos( EgtIf( nHSet == 1, 'B1', 'B2'))
+   local HomeR2 = EgtGetAxisHomePos( EgtIf( nHSet == 1 or nHSet == 11, 'B1', 'B2'))
    local PrevR2 = EMT.R2p or EMT.R2pp or HomeR2
    if not R2 or not PrevR2 or abs( R2 - PrevR2) > 0.1 then
       return true
@@ -2485,12 +2618,12 @@ function MyAdjustLinearAxes()
 
    if EMT.REFLOC then
       local vtE
-      if EMT.HEAD == 'H11' or EMT.HEAD == 'H12' then
+      if EMT.HEAD == 'H11' or EMT.HEAD == 'H12' or EMT.HEAD == 'H19' then
          local dAddLen = EgtIf( EMT.HEAD == 'H12', -SawOffsZ, 0)
          local Len = EMT.TLEN + dAddLen + MillOffs
          local LenRef = MillOffs
          vtE = Vector3d( EMT.TDIR) * Len - Z_AX() * LenRef
-      elseif EMT.HEAD == 'H21' or EMT.HEAD == 'H22' then
+      elseif EMT.HEAD == 'H21' or EMT.HEAD == 'H22' or EMT.HEAD == 'H29' then
          local dAddLen = EgtIf( EMT.HEAD == 'H22', -Saw2OffsZ, 0)
          local Len = EMT.TLEN + dAddLen + Mill2Offs
          local LenRef = Mill2Offs
@@ -2511,7 +2644,7 @@ function MyAdjustLinearAxes()
       else
          EmtSetLastError( 1211, 'Head not defined ' .. ( EMT.HEAD or ''))
       end
-      if EMT.HEAD == 'H11' or EMT.HEAD == 'H12' or EMT.HEAD == 'H13' or EMT.HEAD == 'H15' or sHead == 'H17' then
+      if EMT.HEAD == 'H11' or EMT.HEAD == 'H12' or EMT.HEAD == 'H13' or EMT.HEAD == 'H15' or sHead == 'H17' or  EMT.HEAD == 'H19' then
          EMT.L1 = EMT.L1 - vtE:getX()
          EMT.L2 = EMT.L2 - DeltaTabY - vtE:getY()
          EMT.L3 = EMT.L3 - DeltaTabZ - vtE:getZ()
@@ -2720,13 +2853,40 @@ function EmitZmax( bReset, bEnd, bXhome, PrevR1, PrevR2, bSplitCut, bUsePrevDelt
    if bReset then
       EmitResetMachining()
    end
+
+   if EMT.ISPROBING then
+      -- se lavorazione successiva con stessa testa non si va a Z massima
+      local nSetHead = GetHeadSet( EMT.HEAD)
+      local bIsFirstHead = ( nSetHead == 1 or nSetHead == 11)
+      local sToolNameNextProbe
+      local idProbeNextMachining = EgtGetNextActiveOperation( EMT.MCHID)
+      if idProbeNextMachining then
+         EgtSetCurrMachining( idProbeNextMachining)
+         sToolNameNextProbe = EgtGetMachiningParam( MCH_MP.TOOL)
+         EgtSetCurrMachining( EMT.MCHID)
+      end
+      if sToolNameNextProbe and bIsFirstHead and EMT.PREVTOOL_H1 == sToolNameNextProbe then
+         return false
+      elseif sToolNameNextProbe and not bIsFirstHead and EMT.PREVTOOL_H2 == sToolNameNextProbe then
+         return false
+      end
+   end
+
+   -- se tastatura attiva, si disabilita la tastatura
+   -- gestione eventuale tastatura
+   local bStopProbing = EgtGetValInNotes( EMT.MCHUSERNOTES, 'PROBE', 'b') or EgtGetValInNotes( EMT.MCHUSERNOTES, 'END-PROBE', 'b')
+   if bStopProbing then
+      EmtOutput( 'G145 Z-10 EF0')
+   end
+   EMT.PROBE = nil
+
    -- gruppo della testa
    local nHSet = GetHeadSet( EMT.HEAD)
    local dXPos = EgtIf( bUsePrevDelta, EMT.L2pp or EMT.L2o, EMT.L2o)
    -- reset stato di testa in home
    EMT.XHOME = nil
    -- se testa 1
-   if nHSet == 1 then
+   if nHSet == 1 or nHSet == 11 then
       -- posizioni sicure
       local dMaxZ1 = EgtGetAxisMax( 'Z1')
       local dSafeX1 = EgtGetAxisHomePos( 'X1')
@@ -2890,6 +3050,7 @@ function EmitZmax( bReset, bEnd, bXhome, PrevR1, PrevR2, bSplitCut, bUsePrevDelt
          EmitMoveWaitHead( 2)
       end
    end
+   return true
 end
 
 ---------------------------------------------------------------------
@@ -2919,7 +3080,7 @@ function EmitXhome()
    -- gruppo della testa
    local nHSet = GetHeadSet( EMT.HEAD)
    -- se testa 1
-   if nHSet == 1 then
+   if nHSet == 1 or nHSet == 11 then
       local dMaxZ1 = EgtGetAxisMax( 'Z1')
       local dSafeX1 = EgtGetAxisHomePos( 'X1')
       local dSafeZ1 = EgtGetAxisHomePos( 'Z1')
@@ -2951,7 +3112,7 @@ end
 
 ---------------------------------------------------------------------
 function EmitResetMachining()
-   if EMT.PLANEACTIVE then
+   if EMT.PLANEACTIVE and not EMT.ISPROBING then
       -- se non sono a Z massima e operatore deve entrare in cabina spango sempre
       if not EMT.ZMAX and ( GetSpecUnloading( EMT.PATHID) or GetFall( EMT.PATHID)) then
          EmtOutput( 'M05')

Common_ONE-PF.mlpe

@@ -88,6 +88,10 @@ function OnSimulStart()
    if DefTcPos2 then
       LoadFirstTool( 2, DefTcPos2)
    end
+
+   -- se presenti, nascondo i tastatori
+   DeactivateProbeTool()
+
    ExecStartHome()
    -- Se reset o home, esco
    if EMT.SIM1ST then return end
@@ -122,7 +126,8 @@ function OnSimulStart()
                      { Grp = 'Base', Sub = 'COLLISION', Name = 'TC1'},
                      { Grp = 'Base', Sub = 'COLLISION', Name = 'TC2'},
                      { Grp = 'Base', Sub = 'BELT', Name = 'COLLISION'},
-                     { Grp = 'X1', Sub = 'COLLISION', Name = 'STM'}}
+                     { Grp = 'X1', Sub = 'COLLISION', Name = 'STM'},
+                     { Grp = 'X1', Sub = 'COLLISION', Name = 'STM2'}}
    
    if EgtGetHeadId( 'H21') then
       table.insert( McdData, { Grp = 'X2', Sub = 'COLLISION', Name = 'STM'})
@@ -503,9 +508,11 @@ function OnSimulToolSelect( dPosA)
    EMT.TDIAM = EgtTdbGetCurrToolParam( MCH_TP.DIAM)
    EMT.TUSERNOTES = EgtTdbGetCurrToolParam( MCH_TP.USERNOTES)
    local nSetHead = GetHeadSet( EMT.HEAD)
+   local bIsFirstHead = ( nSetHead == 1 or nSetHead == 11)
+   EMT.ISPROBING = HeadIsProbe( EMT.HEAD)
    -- se ho due teste, verifico che l'altra sia dalla parte opposta
    if EgtGetHeadId( 'H21') then
-      if nSetHead == 1 then
+      if bIsFirstHead then
          EgtSetAxisPos( 'X2', MinX2)
       else
          EgtSetAxisPos( 'X1', MaxX1)
@@ -541,6 +548,75 @@ function OnSimulToolSelect( dPosA)
       -- Imposto visualizzazione
       EgtSetMode( EgtGetHeadId( EMT.HEAD) or GDB_ID.NULL, GDB_MD.STD)
    end
+
+   -- se tastatore
+   if HeadIsProbe( EMT.HEAD) then
+      local bChanged = true
+      if bIsFirstHead then
+         -- se prossimo utensile compatibile, lo prelevo
+         if IsToolCompatibleWithProbe( EMT.PROBENEXTTOOL_H1, EMT.TOOL) then
+            ShowToolInTcPos( EMT.PREVTCPOS_H1, true)
+            EgtLoadTool( EMT.PROBENEXTHEAD_H1, 1, EMT.PROBENEXTTOOL_H1)
+            EMT.TCPOS = EMT.PROBENEXTTCPOS_H1
+            EMT.HEAD = EMT.PROBENEXTHEAD_H1
+            EMT.TOOL = EMT.PROBENEXTTOOL_H1
+         else
+            -- se vecchio utensile compatibile, tengo quello caricato
+            if IsToolCompatibleWithProbe( EMT.PREVTOOL_H1, EMT.TOOL) then
+               bChanged = false
+               EMT.TCPOS = EMT.PREVTCPOS_H1
+               EMT.TOOL = EMT.PREVTOOL_H1
+               EMT.HEAD = EMT.PREVHEAD_H1
+            -- altrimenti si seleziona utensile di default
+            else
+               ExecMoveZmax( EMT.MCHSPLIT, true)
+               EMT.TCPOS = DefTcPos1
+               EMT.TOOL = GetToolNameFromTcPos( DefTcPos1)
+               EMT.HEAD, _ = GetToolHead( EMT.TOOL)
+               ShowToolInTcPos( EMT.PREVTCPOS_H1, true)
+               EgtLoadTool( EMT.HEAD, 1, EMT.TOOL)
+            end
+         end
+         -- se cambiato utensile, si setta subito nome precedente
+         if bChanged then
+            EMT.PREVTOOL_H1 = EMT.TOOL
+            EMT.PREVHEAD_H1 = EMT.HEAD
+            EMT.PREVTCPOS_H1 = EMT.TCPOS
+         end
+      else
+         -- se prossimo utensile compatibile, lo prelevo
+         if IsToolCompatibleWithProbe( EMT.PROBENEXTTOOL_H2, EMT.TOOL) then 
+            ShowToolInTcPos( EMT.PREVTCPOS_H2, true)
+            EgtLoadTool( EMT.PROBENEXTHEAD_H2, 1, EMT.PROBENEXTTOOL_H2)
+            EMT.TCPOS = EMT.PROBENEXTTCPOS_H2
+            EMT.HEAD = EMT.PROBENEXTHEAD_H2
+            EMT.TOOL = EMT.PROBENEXTTOOL_H2
+         else
+            -- se vecchio utensile compatibile, tengo quello caricato
+            if IsToolCompatibleWithProbe( EMT.PREVTOOL_H2, EMT.TOOL) then
+               bChanged = false
+               EMT.TCPOS = EMT.PREVTCPOS_H2
+               EMT.TOOL = EMT.PREVTOOL_H2
+               EMT.HEAD = EMT.PREVHEAD_H2
+            -- altrimenti si seleziona utensile di default
+            else
+               ExecMoveZmax( EMT.MCHSPLIT, true)
+               EMT.TCPOS = DefTcPos2
+               EMT.TOOL = GetToolNameFromTcPos( DefTcPos2)
+               EMT.HEAD, _ = GetToolHead( EMT.TOOL)
+               ShowToolInTcPos( EMT.PREVTCPOS_H2, true)
+               EgtLoadTool( EMT.HEAD, 1, EMT.TOOL)
+            end
+         end
+         -- se cambiato utensile, si setta subito nome precedente
+         if bChanged then
+            EMT.PREVTOOL_H2 = EMT.TOOL
+            EMT.PREVHEAD_H2 = EMT.HEAD
+            EMT.PREVTCPOS_H2 = EMT.TCPOS
+         end
+      end
+   end
+   
    -- carico utensile, con breve pausa
    EgtPause( 100)
    EgtOutText( '')
@@ -609,10 +685,57 @@ function OnSimulToolDeselect( dPrevA)
          LoadNextTool( 2, DefTcPos2)
       end
    end
+
+   -- se presenti, nascondo i tastatori
+   DeactivateProbeTool()
+   local bSkipToolChange = false
+   -- se prossima lavorazione è tastatura, si controlla compatibilità con utensile successivo
+   if HeadIsProbe( EMT.NEXTHEAD) then
+      local idProbeMachining = EgtGetNextActiveOperation( EMT.MCHID)
+      local bFound = false
+      local nProbeHead = GetHeadSet( EMT.NEXTHEAD)
+      local idProbeNextMachining = EgtGetNextActiveOperation( idProbeMachining)
+      while not bFound do
+         if idProbeNextMachining then
+            EgtSetCurrMachining( idProbeNextMachining)
+            local sToolNameNextProbe = EgtGetMachiningParam( MCH_MP.TOOL)
+            if sToolNameNextProbe then
+               local sToolHeadNextProbe, sToolTcPosNextProbe = GetToolHead( sToolNameNextProbe)
+               local nToolHead = GetHeadSet( sToolHeadNextProbe)
+               -- se sono sulla stessa testa
+               if nToolHead == 1 and nProbeHead == 11 then
+                  EMT.PROBENEXTTOOL_H1 = sToolNameNextProbe
+                  EMT.PROBENEXTHEAD_H1 = sToolHeadNextProbe
+                  EMT.PROBENEXTTCPOS_H1 = sToolTcPosNextProbe
+                  bFound = true
+               elseif nToolHead == 2 and nProbeHead == 21 then
+                  EMT.PROBENEXTTOOL_H2 = sToolNameNextProbe
+                  EMT.PROBENEXTHEAD_H2 = sToolHeadNextProbe
+                  EMT.PROBENEXTTCPOS_H2 = sToolTcPosNextProbe
+                  bFound = true
+               end
+            end
+         else
+            break
+         end
+         idProbeNextMachining = EgtGetNextActiveOperation( idProbeNextMachining)
+      end
+      -- ripristino lavorazione corrente
+      EgtSetCurrMachining( EMT.MCHID)
+
+      if nProbeHead == 11 and not( IsToolCompatibleWithProbe( EMT.PREVTOOL_H1, EMT.TOOL)) then
+         ;
+      elseif nProbeHead == 21 and not( IsToolCompatibleWithProbe( EMT.PREVTOOL_H2, EMT.TOOL)) then
+         ; 
+      else
+         bSkipToolChange = true
+      end
+   end
+
    -- reset flag sega a catena già depositata
    EMT.CHSAW_OUT = nil
    -- se utensile non cambia e non è sega a catena, esco
-   if ( EMT.NEXTTOOL == EMT.PREVTOOL_H1 or EMT.NEXTTOOL == EMT.PREVTOOL_H2) and not HeadIsChainSaw( EMT.NEXTHEAD) then return end
+   if bSkipToolChange or ( ( EMT.NEXTTOOL == EMT.PREVTOOL_H1 or EMT.NEXTTOOL == EMT.PREVTOOL_H2) and not HeadIsChainSaw( EMT.NEXTHEAD)) then return end
    -- deposito utensile
    EgtOutText( 'Tool change in progress...')
    -- se prossimo utensile sega a catena, devo mettere in home testa 1 e depositare l'utensile sulla testa 2 o viceversa
@@ -621,7 +744,7 @@ function OnSimulToolDeselect( dPrevA)
       -- se ci sono due teste
       if EgtGetHeadId( 'H21') then
          local nSetHead = GetHeadSet( EMT.NEXTHEAD)
-         if nSetHead == 1 then
+         if nSetHead == 1 or nSetHead == 11 then
             -- porto in home testa 1
             SimulMoveAxis( 'X1', MaxX1, MCH_SIM_STEP.RAPID)
             -- deposito utensile fresa
@@ -677,7 +800,7 @@ function OnSimulToolDeselect( dPrevA)
       if nSetHead == 1 and EMT.PREVHEAD_H1 then
          local MyParkX1 = EgtIf( GetHeadTCSet( EMT.HEAD, EMT.TCPOS) == 'Head1_TC1', ParkX1, ParkFrnX1)
          SimulMoveAxis( 'X1', MyParkX1, MCH_SIM_STEP.RAPID)
-      elseif EMT.PREVHEAD_H2 then
+      elseif nSetHead == 2 and EMT.PREVHEAD_H2 then
          SimulMoveAxis( 'X2', ParkX2, MCH_SIM_STEP.RAPID)
       end
    end
@@ -708,7 +831,7 @@ function OnSimulToolDeselect( dPrevA)
          SimulMoveAxis( 'Z2', ParkCSawZ2, MCH_SIM_STEP.RAPID)
       end
    -- per prossima testa gruppo 1
-   else
+   elseif nNextSetHead == 1 then
       -- visualizzo utensile su TcPos
       ShowToolInTcPos( EMT.PREVTCPOS_H1, true)
       -- nascondo l'utensile sulla testa
@@ -841,6 +964,7 @@ function OnSimulMachiningEnd()
    EMT.DOU_TOOL = nil
    -- salvo dati utensile
    local nSetHead = GetHeadSet( EMT.HEAD)
+
    -- se non ho già tolto la sega a catena, aggiorno valori
    if not EMT.CHSAW_OUT then
    -- per gruppo testa 1
@@ -1615,16 +1739,50 @@ function ExecMoveZmax( bMchSplit, btoXHome)
    -- set della testa
    local nSetHead = GetHeadSet( EMT.HEAD)
    if nSetHead == 0 then return end
+   local bIsFirstHead = ( nSetHead == 1 or nSetHead == 11)
+
+   if EMT.ISPROBING then
+      -- se lavorazione successiva con stessa testa non si va a Z massima
+      local sToolNameNextProbe
+      local idProbeNextMachining = EgtGetNextActiveOperation( EMT.MCHID)
+      if idProbeNextMachining then
+         EgtSetCurrMachining( idProbeNextMachining)
+         sToolNameNextProbe = EgtGetMachiningParam( MCH_MP.TOOL)
+         EgtSetCurrMachining( EMT.MCHID)
+      end
+      local bMoveToZMax = true
+      if sToolNameNextProbe and bIsFirstHead and EMT.PREVTOOL_H1 == sToolNameNextProbe then
+         bMoveToZMax = false
+      elseif sToolNameNextProbe and not bIsFirstHead and EMT.PREVTOOL_H2 == sToolNameNextProbe then
+         bMoveToZMax = false
+      end
+      -- se non serve alzarsi
+      if not bMoveToZMax then
+         local vtE = Vector3d( EMT.EXTR)
+         local ProbePosZ
+         -- ci si riporta in posizione fuori ingombro pezzo
+         if AreSameVectorApprox( vtE, Y_AX()) or AreSameVectorApprox( vtE, -Y_AX()) then
+            ProbePosZ = EMT.TABORI1[3] + EMT.SB
+            if nSetHead == 1 then
+               SimulMoveAxis( 'Z1', ProbePosZ, MCH_SIM_STEP.RAPID)
+            else
+               SimulMoveAxis( 'Z2', ProbePosZ, MCH_SIM_STEP.RAPID)
+            end
+         end
+         return
+      end
+   end
+
    -- posizioni correnti degli assi testa
-   local CurrX = EgtGetAxisPos( EgtIf( nSetHead == 1, 'X1', 'X2'))
-   local CurrZ = EgtGetAxisPos( EgtIf( nSetHead == 1, 'Z1', 'Z2'))
-   local CurrC = EgtGetAxisPos( EgtIf( nSetHead == 1, 'C1', 'C2'))
-   local CurrB = EgtGetAxisPos( EgtIf( nSetHead == 1, 'B1', 'B2'))
+   local CurrX = EgtGetAxisPos( EgtIf( bIsFirstHead, 'X1', 'X2'))
+   local CurrZ = EgtGetAxisPos( EgtIf( bIsFirstHead, 'Z1', 'Z2'))
+   local CurrC = EgtGetAxisPos( EgtIf( bIsFirstHead, 'C1', 'C2'))
+   local CurrB = EgtGetAxisPos( EgtIf( bIsFirstHead, 'B1', 'B2'))
    -- posizioni home degli assi testa
-   local HomeX = EgtGetAxisHomePos( EgtIf( nSetHead == 1, 'X1', 'X2'))
-   local HomeZ = EgtGetAxisHomePos( EgtIf( nSetHead == 1, 'Z1', 'Z2'))
-   local HomeC = EgtGetAxisHomePos( EgtIf( nSetHead == 1, 'C1', 'C2'))
-   local HomeB = EgtGetAxisHomePos( EgtIf( nSetHead == 1, 'B1', 'B2'))
+   local HomeX = EgtGetAxisHomePos( EgtIf( bIsFirstHead, 'X1', 'X2'))
+   local HomeZ = EgtGetAxisHomePos( EgtIf( bIsFirstHead, 'Z1', 'Z2'))
+   local HomeC = EgtGetAxisHomePos( EgtIf( bIsFirstHead, 'C1', 'C2'))
+   local HomeB = EgtGetAxisHomePos( EgtIf( bIsFirstHead, 'B1', 'B2'))
    -- verifico se necessario ruotare la testa
    local bRot = ( abs( HomeC - CurrC) > 1 or abs( HomeB - CurrB) > 1)
    -- se necessario ruotare la testa, allargo i carrelli
@@ -1635,7 +1793,7 @@ function ExecMoveZmax( bMchSplit, btoXHome)
       ExecParkRoller( nil, nil, nil, nil, bMchSplit, bAgg)
    end
    -- se testa 1
-   if nSetHead == 1 then
+   if bIsFirstHead then
       -- se fresa o lama
       if GetHeadTCSet( EMT.HEAD, EMT.TCPOS) == 'Head1_TC1' then
          if not HeadIsChainSaw( EMT.HEAD) then
@@ -2295,6 +2453,14 @@ function LoadNextTool( nHSet, sTcPosDef, bFirst)
    return sTool
 end
 
+---------------------------------------------------------------------
+function DeactivateProbeTool()
+   if Probe then
+      EgtSetMode( EgtGetHeadId( 'H19') or GDB_ID.NULL, GDB_MD.HIDDEN)
+      EgtSetMode( EgtGetHeadId( 'H29') or GDB_ID.NULL, GDB_MD.HIDDEN)
+   end
+end
+
 ---------------------------------------------------------------------
 --   *** ESTIMATION T&L ***
 ---------------------------------------------------------------------
@@ -2719,7 +2885,7 @@ function GetHeadSetFromTcPos( sTcPos)
    local TCPOS_2A = {}
    local TCPOS_2B = {}
    if EgtGetHeadId( 'H21') then
-      TCPOS_1A = { 'T1', 'T3', 'T4', 'T5', 'T6', 'T7', 'T8', 'T9', 'T10'}
+      TCPOS_1A = { 'T1', 'T3', 'T4', 'T5', 'T6', 'T7', 'T8', 'T9', 'T10', '501'}
       TCPOS_1B = { 'T101'}
       TCPOS_2A = { 'T11', 'T12', 'T13', 'T14', 'T15', 'T16', 'T17', 'T18', 'T19', 'T20'}
       TCPOS_2B = { 'T111'}
@@ -2727,7 +2893,7 @@ function GetHeadSetFromTcPos( sTcPos)
       TCPOS_1A = { 'T1', 'T2', 'T3', 'T4', 'T5', 'T6', 'T7', 'T8', 'T9', 'T10'}
       TCPOS_1B = { 'T101', 'T201'}
       TCPOS_1C = { 'T301'}
-      TCPOS_2A = { 'T11', 'T12', 'T13', 'T14', 'T15', 'T16', 'T17', 'T18', 'T19', 'T20'}
+      TCPOS_2A = { 'T11', 'T12', 'T13', 'T14', 'T15', 'T16', 'T17', 'T18', 'T19', 'T20', '502'}
    end
    for _, sVal in ipairs( TCPOS_1A) do
       if sVal == sTcPos then return 1, 1 end

Common_ONE-PF.mlse

@@ -4,6 +4,12 @@
 require( 'EmtGenerator')
 EgtEnableDebug( false)
 
+---------------------------------------------------------------------
+-- *** Generic Machinings ***
+---------------------------------------------------------------------
+require( 'EmtGenMachining')
+---------------------------------------------------------------------
+
 -- Carico libreria
 local BD = require( 'BeamData')
 
@@ -233,6 +239,13 @@ function OnSpecialMoveZup()
             EMC.MODIF = true
          end
       end
+   elseif HeadIsChainSaw( EMC.HEAD) then
+      EMC.TTOTLEN = EgtTdbGetCurrToolParam( MCH_TP.TOTLEN)
+      if EMC.TDIR[3] < -0.15 and EMC.L3 > - EMC.TTOTLEN then
+         EMC.L3 = EMC.TTOTLEN * EMC.TDIR[3]
+         -- dichiaro modificato
+         EMC.MODIF = true
+      end
    end
 end
 
@@ -684,9 +697,49 @@ function OnPostApplyMachining()
 
    -- Inizializzo codice di errore
    EMC.ERR = 0
+   
+   -- Recupero la precedente operazione
+   local nPrevOpeId = EgtGetPrevActiveOperation( EMC.MCHID)
+
+   -- Se esiste lavorazione precedente ed è una tastatura
+   if nPrevOpeId and EgtGetOperationType( nPrevOpeId) == MCH_OY.PROBING then
+      -- se stessa testa e montato già utensile corretto
+      -- recupero valori assi alla fine della lavorazione precedente e all'inizio della corrente
+      local vPrevAxes = EmtGetFinalAxesPos( nPrevOpeId, true)
+      local vCurrAxes = EmtGetInitialAxesPos( EMC.MCHID, true)
+      -- info lavorazione precedente
+      EgtSetCurrMachining( nPrevOpeId)
+      local sPrevTool = EgtGetMachiningParam( MCH_MP.TOOL)
+      local sPrevHead = EgtTdbGetCurrToolParam( MCH_TP.HEAD)
+      local nSetHead = GetHeadSet( sPrevHead)
+      local bPrevIsFirstHead = ( nSetHead == 1 or nSetHead == 11)
+      -- info lavorazione corrente
+      EgtSetCurrMachining( EMC.MCHID)
+      local sCurrTool = EgtGetMachiningParam( MCH_MP.TOOL)
+      local sCurrHead = EgtTdbGetCurrToolParam( MCH_TP.HEAD)
+      nSetHead = GetHeadSet( sCurrHead)
+      local bCurrIsFirstHead = ( nSetHead == 1 or nSetHead == 11)
+
+      -- se utensile corrente è compatibile (significa che è già stato precaricato) se stessa testa e con stessa configurazioen assi rotanti, annullo risalita
+      if IsToolCompatibleWithProbe( sCurrTool, sPrevTool) and bPrevIsFirstHead == bCurrIsFirstHead and abs( vCurrAxes[4] - vPrevAxes[4]) < 1 and abs( vCurrAxes[5] - vPrevAxes[5]) < 1 then
+         -- in lavorazione precedente elimino eventuale retrazione a Zmax
+         EmtRemoveRise( nPrevOpeId)
+         -- in lavorazione corrente elimino eventuale approccio da Zmax
+         EmtRemoveClimb( EMC.MCHID)
+         -- prendo sempre la Z massima tra le due
+         local vClimbPoint
+         if vCurrAxes[3] - 1.0 < vPrevAxes[3] then
+            vClimbPoint = vCurrAxes
+            vCurrAxes[3] = vPrevAxes[3]
+         elseif vPrevAxes[3] - 1.0 < vCurrAxes[3] then
+            vClimbPoint = vPrevAxes
+            vPrevAxes[3] = vCurrAxes[3]
+         end
+         EmtAddClimb( EMC.MCHID, vClimbPoint, 4, 1, 0)
+      end
+   end
 
    -- Recupero la posizione della trave e dei carrelli al termine della precedente operazione
-   local nPrevOpeId = EgtGetPrevActiveOperation( EMC.MCHID)
    -- se precedente operazione non esiste, errore
    if not nPrevOpeId then
       EMC.ERR = 1
@@ -844,7 +897,6 @@ function OnPostApplyMachining()
       local vAxes = EmtGetAxesPos( nLastEntId)
       if #vAxes > 0 then EMC.TPOS = vAxes[1] end
    end
-
 end
 
 ---------------------------------------------------------------------
@@ -1122,6 +1174,17 @@ function SpecialCalcMachiningEncumbrance( nMchId, bPreCut)
    end
    -- Recupero testa
    local sHead = EgtTdbGetCurrToolParam( MCH_TP.HEAD)
+   local sToolName = EgtTdbGetCurrToolParam( MCH_TP.NAME)
+   local nSetHead = GetHeadSet( sHead)
+   local bIsFirstHead = ( nSetHead == 1 or nSetHead == 11)
+
+   -- se lavorazione di tastatura, si considera montato utensile di default
+   if HeadIsProbe( sHead) then
+      local sOtherToolName = GetToolNameFromTcPos( EgtIf( bIsFirstHead, DefTcPos1, DefTcPos2))
+      local sOtherHeadTool, _ = GetToolHead( sOtherToolName)
+      EgtLoadTool( sOtherHeadTool, 1, sOtherToolName)
+   end
+
    -- Recupero valore assi macchina
    local nSecId = EgtGetNext( EgtGetFirstInGroup( nPathId))
    local vAxes = EmtGetAxesPos( nSecId)
@@ -1132,8 +1195,8 @@ function SpecialCalcMachiningEncumbrance( nMchId, bPreCut)
    end
    -- Calcolo dell'ingombro della testa rispetto allo Zero Macchina
    local b3Enc
-   
-   if sHead ~= 'H21' and sHead ~= 'H22' and sHead ~= 'H23' then
+
+   if bIsFirstHead then
       EgtSetAxisPos( 'C1', vAxes[4])
       EgtSetAxisPos( 'B1', vAxes[5])
       if sHead == 'H13' or sHead == 'H15' then
@@ -1167,6 +1230,7 @@ function SpecialCalcMachiningEncumbrance( nMchId, bPreCut)
    local dDistFront = - ptMax:getX() - LoadT - dHeadFront
    local dDistBack = ptMin:getX() + LoadT + EMC.LB - dHeadBack
    EgtOutLog( '  DistFront = ' .. EgtNumToString( dDistFront, 1) .. ' DistBack = ' .. EgtNumToString( dDistBack, 1), 3)
+
    return dDistFront, dDistBack, dRollFront, dRollBack
 end
 

Essetre-PFrl.ini

@@ -91,11 +91,13 @@ Language1=Italiano,Ita.txt
 Language2=English,Eng.txt
 
 [Tools]
+Probe=1
 Drillbit=1
 Sawblade=1
 Mill=1
 Mortise=1
 Chisel=0
+ProbeMaker=MakeProbe.lua
 DrillMaker=MakeWoodDrill.lua
 SawbladeMaker=MakeSawblade.lua
 MillMaker=MakeWoodCylMill.lua
@@ -114,6 +116,7 @@ H21.1:MILL_NOTIP=MillNoTip.nge
 H22.1=Saw.nge
 
 [Machinings]
+Probing=1
 Drilling=1
 Sawing=1
 Milling=1
@@ -126,6 +129,8 @@ SawFinishing=0
 [Machining]
 InitScript=InitMach.lua
 ExitScript=ExitMach.lua
+[Probing]
+PrbScript1=StdProbe
 
 [Disposition]
 ;InitScript=InitDisp.lua
@@ -139,10 +144,14 @@ H12=6615
 H13=6616
 ; Angular transmission
 H17=6617
+; Probe
+H19=6618
 ; Second 5 axis head
 H21=6620
 ; Second 5 axis saw
 H22=6623
+; Probe
+H29=6618
 
 [SetUp]
 Default=Standard
@@ -155,3 +164,5 @@ WinPlace=0,514,138,628,810
 Enable=1
 Save=0
 
+[ToolTrace]
+Enable=1

Essetre-PFrl.mlde

@@ -42,11 +42,11 @@
 
 -- Intestazioni
 require( 'EmtGenerator')
-EgtEnableDebug( false)
+EgtEnableDebug( true)
 
-PP_VER = '2.7j2'
+PP_VER = '2.7j2_DEV2_B'
 PP_NVER = '2.7.10.2'
-MIN_MACH_VER = '2.5k1'
+MIN_MACH_VER = '2.7f3'
 MACH_NAME = string.match( EgtGetCurrMachineDir(), "[^\\]+$")  -- si ricava il nome della macchina dal direttorio
 
 -- Carico i dati globali
@@ -178,6 +178,7 @@ OptimizedLoadBeam = true
 AutoRotMinLen = 0
 EstimationRapidMultiplier = 1
 ForceToCloseRollersGate = false
+Probe = nil
 AggreBlockHaus = false
 
 -- Aggiornamento con dati da TechnoEssetre7
@@ -267,8 +268,12 @@ if EgtExistsFile( sData) then
          if Machine.Offsets.MAXACC then MaxAcc = Machine.Offsets.MAXACC end
          if Machine.Offsets.MINACC then MinAcc = Machine.Offsets.MINACC end
          if Machine.Offsets.COEFF_STIMATEMPI and Machine.Offsets.COEFF_STIMATEMPI > 0 then EstimationRapidMultiplier = Machine.Offsets.COEFF_STIMATEMPI end
+         if Machine.Offsets.MAXFEEDPINZE then MaxFeedPinze = Machine.Offsets.MAXFEEDPINZE end
+         if Machine.Offsets.MAXACC then MaxAcc = Machine.Offsets.MAXACC end
+         if Machine.Offsets.MINACC then MinAcc = Machine.Offsets.MINACC end
          if Machine.Offsets.CHIUDI_PINZE_2_3_SCAMBIO then ForceToCloseRollersGate = Machine.Offsets.CHIUDI_PINZE_2_3_SCAMBIO == 1 end
          if Machine.Offsets.WOOD_DENSITY then WoodDensity = Machine.Offsets.WOOD_DENSITY end
+         if Machine.Offsets.PROBE then Probe = Machine.Offsets.PROBE end  -- Tastatore su entrembe le teste. 1 = solo testa 1, 2 = solo testa 2, 3 = entrambe le teste
          if Machine.Offsets.AGGRE_BH then AggreBlockHaus = ( Machine.Offsets.AGGRE_BH == 1) end
          AngTrBHOffs = Machine.Offsets.OFFSETZ_RINV_BH or AngTrBHOffs
          AngTrBHLen = Machine.Offsets.OFFSETX_RINV_BH or AngTrBHLen
@@ -344,6 +349,13 @@ EmtAxis {
       Home = ParkC1,
       Geo = 'C1_AXIS/GEO',
       Aux = {'C1_AXIS/SOLID', 'C1_AXIS/COLLISION'}}
+-- se tastatore presente
+local sBAxisAuxGeom
+if Probe == 1 or Probe == 3 then
+   sBAxisAuxGeom = {'B1_AXIS/SOLID', 'B1_AXIS/COLLISION', 'PROBE_B1/SOLID_PROBE', 'PROBE_B1/COLLISION_PROBE'}
+else
+   sBAxisAuxGeom = {'B1_AXIS/SOLID', 'B1_AXIS/COLLISION'}
+end
 EmtAxis {
       Name = 'B1',
       Parent = 'C1',
@@ -354,7 +366,7 @@ EmtAxis {
       Stroke = {MinB1, MaxB1},
       Home = ParkB1,
       Geo = 'B1_AXIS/GEO',
-      Aux = {'B1_AXIS/SOLID', 'B1_AXIS/COLLISION'}}
+      Aux = sBAxisAuxGeom }
 -- Frese
 local H11Id = EmtHead {
       Name = 'H11',
@@ -382,6 +394,22 @@ local H12Id = EmtHead {
       OthColl = {'B1/SOLID', 'C1/SOLID'},
       Geo = 'H12_HEAD/GEO'}
 --EgtSetInfo( H12Id, 'ZMAXONROT', '1,190')
+-- Tastatore su testa 1
+local H19Id
+if Probe == 1 or Probe == 3 then
+   H19Id = EmtHead {
+         Name = 'H19',
+         Parent = 'B1',
+         HSet = 'H19',
+         Type = MCH_HT.STD,
+         Pos = Point3d( -60, -81, 0),
+         TDir = Z_AX(),
+         ADir = -Y_AX(),
+         Rot1W = 0.2,
+         Rot2Stroke = { MinB1, MaxB1},
+         OthColl = {'B1/SOLID', 'C1/SOLID'},
+         Geo = 'H19_HEAD/GEO'}
+end
 -- Sega a catena
 EmtAxis {
       Name = 'A',
@@ -461,6 +489,12 @@ local C2Id = EmtAxis {
       Home = ParkC2,
       Geo = 'C2_AXIS/GEO',
       Aux = {'C2_AXIS/SOLID', 'C2_AXIS/COLLISION'}}
+-- se presente tastatore
+if Probe == 2 or Probe == 3 then
+   sBAxisAuxGeom = {'B2_AXIS/SOLID', 'B2_AXIS/COLLISION', 'PROBE_B2/SOLID_PROBE', 'PROBE_B2/COLLISION_PROBE'}
+else
+   sBAxisAuxGeom = {'B2_AXIS/SOLID', 'B2_AXIS/COLLISION'}
+end
 local B2Id = EmtAxis {
       Name = 'B2',
       Parent = 'C2',
@@ -471,7 +505,7 @@ local B2Id = EmtAxis {
       Stroke = {MinB2, MaxB2},
       Home = ParkB2,
       Geo = 'B2_AXIS/GEO',
-      Aux = {'B2_AXIS/SOLID', 'B2_AXIS/COLLISION'}}
+      Aux = sBAxisAuxGeom}
 local vtMove2 = Vector3d( 0, Head2Y, Head2Z)
 EgtMove( EgtGetFirstNameInGroup( X2Id, 'SOLID'), vtMove2, GDB_RT.GLOB)
 EgtMove( EgtGetFirstNameInGroup( X2Id, 'COLLISION'), vtMove2, GDB_RT.GLOB)
@@ -481,6 +515,10 @@ EgtMove( EgtGetFirstNameInGroup( C2Id, 'SOLID'), vtMove2, GDB_RT.GLOB)
 EgtMove( EgtGetFirstNameInGroup( C2Id, 'COLLISION'), vtMove2, GDB_RT.GLOB)
 EgtMove( EgtGetFirstNameInGroup( B2Id, 'SOLID'), vtMove2, GDB_RT.GLOB)
 EgtMove( EgtGetFirstNameInGroup( B2Id, 'COLLISION'), vtMove2, GDB_RT.GLOB)
+if Probe == 2 or Probe == 3 then
+   EgtMove( EgtGetFirstNameInGroup( B2Id, 'SOLID_PROBE'), vtMove2, GDB_RT.GLOB)
+   EgtMove( EgtGetFirstNameInGroup( B2Id, 'COLLISION_PROBE'), vtMove2, GDB_RT.GLOB)
+end
 -- Frese
 local H21Id = EmtHead {
       Name = 'H21',
@@ -509,6 +547,22 @@ if SecondSaw then
          Geo = 'H22_HEAD/GEO'}
    --EgtSetInfo( H22Id, 'ZMAXONROT', '1,190')
 end
+-- Tastatore su testa 2
+local H29Id
+if Probe == 2 or Probe == 3 then
+   H29Id = EmtHead {
+         Name = 'H29',
+         Parent = 'B2',
+         HSet = 'H29',
+         Type = MCH_HT.STD,
+         Pos = Point3d( Head2X - 60, Head2Y - 81, Head2Z + 0),
+         TDir = Z_AX(),
+         ADir = -Y_AX(),
+         Rot1W = 0.2,
+         Rot2Stroke = { MinB2, MaxB2},
+         OthColl = {'B2/SOLID', 'C2/SOLID'},
+         Geo = 'H29_HEAD/GEO'}
+end
 --  *** Carrelli ***
 -- Morse
 local Y1Id = EmtAxis {
@@ -938,8 +992,12 @@ end
 function GetHeadSet( sHead)
    if sHead == 'H11' or sHead == 'H12' or sHead == 'H13' or sHead == 'H15' or sHead == 'H17' then
       return 1
-   elseif sHead == 'H21' or sHead == 'H22' or sHead == 'H23' then
+   elseif sHead == 'H19' then
+      return 11
+   elseif sHead == 'H21' or sHead == 'H22' then
       return 2
+   elseif sHead == 'H29' then
+      return 21
    else
       return 0
    end
@@ -987,6 +1045,54 @@ function HeadIsChainSaw( sHead)
    return ( sHead == 'H13')
 end
 
+---------------------------------------------------------------------
+-- Funzione che riconosce testa per tastatore
+function HeadIsProbe( sHead)
+   return ( sHead == 'H19' or sHead == 'H29')
+end
+
+---------------------------------------------------------------------
+function IsToolCompatibleWithProbe( sToolName, sCurrTool)
+   local bToolIsCompatible = false
+   if sToolName then
+      EgtTdbSetCurrTool( sToolName)
+      local dToolDiam = EgtTdbGetCurrToolParam( MCH_TP.TOTDIAM)
+      local dToolLen = EgtTdbGetCurrToolParam( MCH_TP.TOTLEN)
+      if dToolDiam < 100 and dToolLen < 160 then
+         bToolIsCompatible = true
+      end
+      EgtTdbSetCurrTool( sCurrTool)
+   end
+   return bToolIsCompatible
+end
+
+---------------------------------------------------------------------
+function GetToolNameFromTcPos( sTcPos)
+   local sToolName
+   -- Carico gli utensili sulle barre portautensili
+   local vTcPos = EgtGetAllTcPosNames()
+   if vTcPos then
+      for i = 1, #vTcPos do
+         if vTcPos[i] == sTcPos then
+            local sToolsName = EgtGetToolsInCurrSetupPos( vTcPos[i])
+            sToolName = sToolsName[1]
+         end
+      end
+   end
+   return sToolName
+end
+
+---------------------------------------------------------------------
+function GetToolHead( sToolName)
+   local sHead
+   local sCurrTool = EgtTdbGetCurrToolParam( MCH_TP.NAME)
+   EgtTdbSetCurrTool( sToolName)
+   sHead = EgtTdbGetCurrToolParam( MCH_TP.HEAD)
+   sTcPos = EgtTdbGetCurrToolParam( MCH_TP.TCPOS)
+   EgtTdbSetCurrTool( sCurrTool)
+   return sHead, sTcPos
+end
+
 ---------------------------------------------------------------------
 -- Funzione che calcola la posizione Home di Z per la sega a catena dal valore dell'asse virtuale
 function GetChainSawZHomeFromVirtualAxis( dPosA)
@@ -1041,6 +1147,7 @@ function GetZExtra( sHead, dAngV)
          return 0
       end
    end
+   return 0
 end
 
 ---------------------------------------------------------------------
@@ -1081,7 +1188,6 @@ function GetPY2Light()
    return ( EgtGetInfo( PY2LightId, 'On') == '1')
 end
 
-
 ---------------------------------------------------------------------
 -- Funzione per resettare tutte le attivazioni della macchina
 function OnResetMachine()

MachNotes.ini

@@ -2,6 +2,9 @@
 ;Index = Type, Description, Default Value
 ; Type : b=boolean, d=double, l=lenght, s=string
 
+[Probing]
+0=s,Type,Head
+
 [Drilling]
 
 [Sawing]
@@ -13,6 +16,9 @@
 3=d,TrimExt,0
 4=s,VtFaceUse,0,0,0
 5=s,EdgesFaceUse,0
+6=b,PROBE,0
+7=b,START-PROBE,0
+8=b,END-PROBE,0
 
 [Pocketing]
 0=l,MaxElev,0

Scripts/SetUp.lua

@@ -31,6 +31,8 @@ local GS = {}
 local PositionTable = {}
 local SecondSaw = ( EgtGetHeadId( 'H22') ~= nil)
 local AggreBH = ( EgtGetHeadId( 'H17') ~= nil)
+local ProbeFirstHead = ( EgtGetHeadId( 'H19') ~= nil)
+local ProbeSecondHead = ( EgtGetHeadId( 'H29') ~= nil)
 if SecondSaw then
    PositionTable = {{Pos = "Pos1",  TcPos = "T1",  Head = "H12", Group = "G1"},
                     {Pos = "Pos2",  TcPos = "T3",  Head = "H11", Group = "G1"},
@@ -79,7 +81,17 @@ else
       table.insert( PositionTable, {Pos = "Pos21", TcPos = "T201", Head = "H13", Group = "G2"})
    end
 end
-local UsePositionHead = false
+-- aggiunta tastatori
+if ProbeFirstHead then
+   local sIndex = EgtNumToString( #PositionTable + 1)
+   table.insert( PositionTable, {Pos = "Pos"..sIndex, TcPos = "T501", Head = "H19", Group = "G4"})
+end
+if ProbeSecondHead then
+   local sIndex = EgtNumToString( #PositionTable + 1)
+   table.insert( PositionTable, {Pos = "Pos"..sIndex, TcPos = "T502", Head = "H29", Group = "G4"})
+end
+
+local UsePositionHead = true
 
 local function IsInGeomSet( ToolHead, PosHead)
    for GsIndex = 1, #GS do

ToolNotes.ini

@@ -36,6 +36,7 @@
 4=s,DOUBLE
 
 [MORTISE_STD]
-0=b,MORTISE
-1=d,STEP
-2=d,SIDESTEP
+0=th,TH,
+1=b,MORTISE
+2=d,STEP
+3=d,SIDESTEP

UpdateLog.txt

@@ -39,6 +39,7 @@ Versione 2.7g1 (01/07/2025)
 
 Versione 2.7f1 (04/06/2025)
 - (SIM) Aggiunta gestione qualità VMILL da impostazioni macchina. Tolto parametro 'CoeffVM'.
+- (GEN) Prima versione gestione tastatore
 - (GEN) Aggiunti parametri FMAXPINZE, MAXACC, MINACC configurabili da TS3. Ticket#2052
 
 Versione 2.7e1 (28/05/2025)