Corretto indice faccia e legato al tipo di macchina, carico desto o sinistro.

- Probe settato false per default

Common_ONE-PF.NUM.mlpe

@@ -27,7 +27,10 @@ function OnStart()
    --EMT.LINEINC = 1        -- incremento numerazione linee
    --EMT.Ft = 'F'           -- token per feed
    --EMT.St = 'S'           -- token per speed
-   EMT.FMAXPINZE = 102000 -- feed massima pinze
+   EMT.FMAXPINZE = EgtClamp( MaxFeedPinze or 102000, 20000, 102000)  -- feed massima pinze
+   EMT.MAXACC = MaxAcc or ( EMT.FMAXPINZE / ( 60 * 0.3))  -- accelerazione massima pinze
+   EMT.MINACC = MinAcc or ( EMT.FMAXPINZE / ( 60 * 4))    -- accelerazione minima pinze
+
    -- utensili default
    EMT.PREVTCPOS_H1 = DefTcPos1
    EMT.PREVTCPOS_H2 = DefTcPos2
@@ -442,6 +445,14 @@ function OnMachiningStart()
       local MyParkCSawC2 = GetChainSawCHomeFromVirtualAxis( dPosA)
       EmtModifyAxisHome( 'C2', MyParkCSawC2)
    end
+   -- gestione eventuale tastatura
+   local bProbing = EgtGetValInNotes( EMT.MCHUSERNOTES, 'PROBE', 'b') or EgtGetValInNotes( EMT.MCHUSERNOTES, 'START-PROBE', 'b')
+   if bProbing and Probe then
+      if VerifyToolProbeCompatibility() then
+         EMT.PROBE = true
+         EMT.EXECPROBE = true
+      end
+   end
    -- gestione eventuale lavorazione in doppio
    local nDouType = EgtGetValInNotes( EMT.MCHUSERNOTES, 'DOUBLE', 'i')
    if nDouType == 2 or nDouType == 3 then
@@ -605,6 +616,16 @@ function OnMachiningEnd()
    EMT.PREVTOOL = EMT.TOOL
    EMT.PREVHEAD = EMT.HEAD
    EMT.PREVTCPOS = EMT.TCPOS
+
+   -- se tastatura attiva, si disabilita la tastatura
+   if EMT.PROBE then
+      -- gestione eventuale tastatura
+      local bStopProbing = EgtGetValInNotes( EMT.MCHUSERNOTES, 'PROBE', 'b') or EgtGetValInNotes( EMT.MCHUSERNOTES, 'END-PROBE', 'b')
+      if bStopProbing then
+         EmtOutput( 'G145 Z-10 EF0')
+         EMT.PROBE = nil
+      end
+   end
    -- se taglio finale, aggiorno lunghezza barra
    if EMT.MCHCUT then
       EMT.LB = EMT.LT + ( EMT.X_OFF or 0)
@@ -1508,6 +1529,47 @@ function OnRapid()
          EMT.RELOAD = false
          EMT.RELOAD2 = nil
       end
+      -- TODO DA SISTEMARE
+      -- se bisogna fare tastatura
+      if EMT.EXECPROBE then
+         EMT.EXECPROBE = nil
+         local dSecDistProbe = 10   -- 10 = distanza sicurezza tastatore
+         local dLenProbe = 170      -- 170 = lunghezza tastatore
+         local dOffHeadProbe = 75   -- offset naso mandrino / centro tastatore
+         local dPivot = EgtIf( GetHeadSet( EMT.HEAD) == 1, MillOffs, Mill2Offs)
+         local vtE = Vector3d( EMT.EXTR)
+         local sFace, ProbePosX, ProbePosZ
+         if AreSameVectorApprox( vtE, Y_AX()) then
+            ProbePosX = -( EMT.TABORI1[2] + EMT.HB + dSecDistProbe + dLenProbe + MillOffs)
+            ProbePosZ = EMT.TABORI1[3] - MillOffs + ( EMT.SB / 2) + EgtIf( EMT.R2 > 0, dOffHeadProbe, -dOffHeadProbe)
+            sFace = EgtIf( BD.RIGHT_LOAD, 4, 2)
+         elseif AreSameVectorApprox( vtE, -Y_AX()) then
+            ProbePosX = -( EMT.TABORI1[2] - dSecDistProbe - dLenProbe - MillOffs)
+            ProbePosZ = EMT.TABORI1[3] - MillOffs + ( EMT.SB / 2) + EgtIf( EMT.R2 > 0, dOffHeadProbe, -dOffHeadProbe)
+            sFace = EgtIf( BD.RIGHT_LOAD, 2, 4)
+         elseif AreSameVectorApprox( vtE, Z_AX()) then
+            ProbePosX = -( EMT.TABORI1[2] + ( EMT.HB / 2) + dOffHeadProbe)
+            ProbePosZ = EMT.TABORI1[3] + EMT.SB + dSecDistProbe + dLenProbe
+            sFace = 3
+         else
+            error( "PROBING DIRECTION NOT MANAGED")
+         end
+
+         EmitMoveDataHead( GetHeadSet( EMT.HEAD), { X=ProbePosX, Z=ProbePosZ, B=EMT.R2, C=EMT.R1})
+         EmitMoveStartHead( GetHeadSet( EMT.HEAD))
+         EmitMoveWaitHead( GetHeadSet( EMT.HEAD))
+         local sProbeHead = ' ET' .. GetHeadSet( EMT.HEAD)
+         EmtOutput( 'G145 Z-20 EF'..sFace..sProbeHead)
+         -- ci si riporta in posizione fuori ingombro pezzo
+         if AreSameVectorApprox( vtE, Y_AX()) or AreSameVectorApprox( vtE, -Y_AX()) then
+            ProbePosZ = EMT.TABORI1[3] + EMT.SB
+         elseif AreSameVectorApprox( vtE, Z_AX()) then
+            ProbePosX = EMT.L2
+         end
+         EmitMoveDataHead( GetHeadSet( EMT.HEAD), { X=ProbePosX, Z=ProbePosZ, B=EMT.R2, C=EMT.R1})
+         EmitMoveStartHead( GetHeadSet( EMT.HEAD))
+         EmitMoveWaitHead( GetHeadSet( EMT.HEAD))
+      end
       -- se taglio di coda senza residuo da scaricare, emetto M175 per accelerare il carico della barra successiva
       if EMT.MCHUSERNOTES and EMT.MCHUSERNOTES:find( 'Cut', 1, true) then
          EmtOutput( 'M175')
@@ -1788,7 +1850,7 @@ function CalcDinamicaPinze( dH, dS, dL)
    local TempoAcc = ( ( Massa * FMaxPinze) / ( 60 * ForzaAttrito) / 1000)
    if ( TempoAcc < MinTempoAcc) then TempoAcc = MinTempoAcc end
    if ( TempoAcc > MaxTempoAcc) then TempoAcc = MaxTempoAcc end
-   local AccMaxPinze = FMaxPinze / ( 60 * MinTempoAcc)
+   local AccMaxPinze = EMT.MAXACC or FMaxPinze / ( 60 * MinTempoAcc)
    local AccPinze = FMaxPinze / ( 60 * TempoAcc)
    local RidFeed = 100 / Massa * 100
    if RidFeed > 100 then

Common_ONE-PF.mlpe

@@ -237,18 +237,24 @@ function OnSimulDispositionStart()
                end
             end
             -- determino la risoluzione dello Zmap
-            local dArea = b3Raw:getDimX() * b3Raw:getDimY() + b3Raw:getDimX() * b3Raw:getDimZ() + b3Raw:getDimY() * b3Raw:getDimZ()
             local dTol = 4.00
-            if dArea < CoeffVM * 0.5e6 then
-               dTol = 1.01
-            elseif dArea < CoeffVM * 1.2e6 then
-               dTol = 1.51
-            elseif dArea < CoeffVM * 2.5e6 then
-               dTol = 1.97
-            elseif dArea < CoeffVM * 5.0e6 then
-               dTol = 2.81
-            elseif dArea < CoeffVM * 10.0e6 then
-               dTol = 3.77
+            if EmtGetVMillStep then
+               dTol = EmtGetVMillStep( b3Raw:getDimX(), b3Raw:getDimY(), b3Raw:getDimZ(), 4.00)
+            else
+               local dArea = b3Raw:getDimX() * b3Raw:getDimY() + b3Raw:getDimX() * b3Raw:getDimZ() + b3Raw:getDimY() * b3Raw:getDimZ()
+               if dArea < 0.075e6 then
+                  dTol = 0.71
+               elseif dArea < 0.15e6 then
+                  dTol = 1.01
+               elseif dArea < 0.3e6 then
+                  dTol = 1.51
+               elseif dArea < 0.6e6 then
+                  dTol = 1.97
+               elseif dArea < 1.2e6 then
+                  dTol = 2.81
+               elseif dArea < 2.4e6 then
+                  dTol = 3.77
+               end
             end
             -- creo lo Zmap
             local VMillId = EgtVolZmapBox( nPartRawId, b3Raw:getMin(), b3Raw:getDimX(), b3Raw:getDimY(), b3Raw:getDimZ(), dTol, true, GDB_RT.GLOB)
@@ -773,6 +779,12 @@ function OnSimulMachiningStart()
    else
       EMT.TASKID = 0
    end
+   -- gestione eventuale tastatura
+   EMT.PROBE = nil
+   local bProbing = EgtGetValInNotes( EMT.MCHUSERNOTES, 'PROBE', 'b')
+   if bProbing then
+      EMT.PROBE = true
+   end
    -- gestione eventuale lavorazione in doppio
    local nDouType = EgtGetValInNotes( EMT.MCHUSERNOTES, 'DOUBLE', 'i')
    if nDouType == 2 then
@@ -2276,6 +2288,15 @@ function LoadNextTool( nHSet, sTcPosDef, bFirst)
    return sTool
 end
 
+---------------------------------------------------------------------
+function VerifyToolProbeCompatibility()
+   local bToolIsCompatible = false
+   if EMT.TTOTLEN < 160 and EMT.TTOTDIAM < 80 then
+      bToolIsCompatible = true
+   end
+   return bToolIsCompatible
+end
+
 ---------------------------------------------------------------------
 --   *** ESTIMATION T&L ***
 ---------------------------------------------------------------------

Essetre-PFrl.mlde

@@ -44,10 +44,10 @@
 require( 'EmtGenerator')
 EgtEnableDebug( false)
 
-PP_VER = '2.7e1'
-PP_NVER = '2.7.5.1'
+PP_VER = '2.7f1_DEV7'
+PP_NVER = '2.7.6.1'
 MIN_MACH_VER = '2.5k1'
-MACH_NAME = 'Essetre-PFrl'
+MACH_NAME = string.match( EgtGetCurrMachineDir(), "[^\\]+$")  -- si ricava il nome della macchina dal direttorio
 
 -- Carico i dati globali
 local sMachDir = EgtGetCurrMachineDir()
@@ -172,9 +172,12 @@ DefTcPos1 = 'T3'
 DefTcPos2 = 'T13'
 SecondSaw = false
 AutomaticRotation = true
+OptimizedLoadBeam = true
 AutoRotMinLen = 0
 CoeffVM = 0.5
+EstimationRapidMultiplier = 1
 ForceToCloseRollersGate = false
+Probe = nil
 
 -- Aggiornamento con dati da TechnoEssetre7
 local sTs3Data = EgtGetStringFromIni( 'Beam', 'DATA_DIR', "C:\\TechnoEssetre7\\EgtData", EgtGetIniFile()).."\\Essetre-PFrl.data"
@@ -258,8 +261,13 @@ if EgtExistsFile( sData) then
          if Machine.Offsets.SAW2OFFSZ then Saw2OffsZ = Machine.Offsets.SAW2OFFSZ end
          if Machine.Offsets.DEFTCPOS1 then DefTcPos1 = ( 'T' .. Machine.Offsets.DEFTCPOS1) end
          if Machine.Offsets.DEFTCPOS2 then DefTcPos2 = ( 'T' .. Machine.Offsets.DEFTCPOS2) end
+         if Machine.Offsets.COEFF_STIMATEMPI and Machine.Offsets.COEFF_STIMATEMPI > 0 then EstimationRapidMultiplier = Machine.Offsets.COEFF_STIMATEMPI end
+         if Machine.Offsets.MAXFEEDPINZE then MaxFeedPinze = Machine.Offsets.MAXFEEDPINZE end
+         if Machine.Offsets.MAXACC then MaxAcc = Machine.Offsets.MAXACC end
+         if Machine.Offsets.MINACC then MinAcc = Machine.Offsets.MINACC end
          if Machine.Offsets.CHIUDI_PINZE_2_3_SCAMBIO then ForceToCloseRollersGate = Machine.Offsets.CHIUDI_PINZE_2_3_SCAMBIO == 1 end
          if Machine.Offsets.WOOD_DENSITY then WoodDensity = Machine.Offsets.WOOD_DENSITY end
+         if Machine.Offsets.PROBE then Probe = Machine.Offsets.PROBE end  -- Tastatore su entrembe le teste. 1 = solo testa 1, 2 = solo testa 2, 3 = entrambe le teste
          -- aggiustamenti
          MinY1 = MinV1 + MinDeltaYV
          MaxY1 = MaxMchY1
@@ -331,6 +339,13 @@ EmtAxis {
       Home = ParkC1,
       Geo = 'C1_AXIS/GEO',
       Aux = {'C1_AXIS/SOLID', 'C1_AXIS/COLLISION'}}
+-- se tastatore presente
+local sBAxisAuxGeom
+if Probe == 1 or Probe == 3 then
+   sBAxisAuxGeom = {'B1_AXIS/SOLID', 'B1_AXIS/COLLISION', 'PROBE_B1/SOLID_PROBE', 'PROBE_B1/COLLISION_PROBE'}
+else
+   sBAxisAuxGeom = {'B1_AXIS/SOLID', 'B1_AXIS/COLLISION'}
+end
 EmtAxis {
       Name = 'B1',
       Parent = 'C1',
@@ -341,7 +356,7 @@ EmtAxis {
       Stroke = {MinB1, MaxB1},
       Home = ParkB1,
       Geo = 'B1_AXIS/GEO',
-      Aux = {'B1_AXIS/SOLID', 'B1_AXIS/COLLISION'}}
+      Aux = sBAxisAuxGeom }
 -- Frese
 local H11Id = EmtHead {
       Name = 'H11',
@@ -430,6 +445,12 @@ local C2Id = EmtAxis {
       Home = ParkC2,
       Geo = 'C2_AXIS/GEO',
       Aux = {'C2_AXIS/SOLID', 'C2_AXIS/COLLISION'}}
+-- se presente tastatore
+if Probe == 2 or Probe == 3 then
+   sBAxisAuxGeom = {'B2_AXIS/SOLID', 'B2_AXIS/COLLISION', 'PROBE_B2/SOLID_PROBE', 'PROBE_B2/COLLISION_PROBE'}
+else
+   sBAxisAuxGeom = {'B2_AXIS/SOLID', 'B2_AXIS/COLLISION'}
+end
 local B2Id = EmtAxis {
       Name = 'B2',
       Parent = 'C2',
@@ -440,7 +461,7 @@ local B2Id = EmtAxis {
       Stroke = {MinB2, MaxB2},
       Home = ParkB2,
       Geo = 'B2_AXIS/GEO',
-      Aux = {'B2_AXIS/SOLID', 'B2_AXIS/COLLISION'}}
+      Aux = sBAxisAuxGeom}
 local vtMove2 = Vector3d( 0, Head2Y, Head2Z)
 EgtMove( EgtGetFirstNameInGroup( X2Id, 'SOLID'), vtMove2, GDB_RT.GLOB)
 EgtMove( EgtGetFirstNameInGroup( X2Id, 'COLLISION'), vtMove2, GDB_RT.GLOB)

MachNotes.ini

@@ -13,6 +13,9 @@
 3=d,TrimExt,0
 4=s,VtFaceUse,0,0,0
 5=s,EdgesFaceUse,0
+6=b,PROBE,0
+7=b,START-PROBE,0
+8=b,END-PROBE,0
 
 [Pocketing]
 0=l,MaxElev,0

UpdateLog.txt

@@ -1,5 +1,10 @@
            ==== Common_ONE-PF Update Log ====
 
+Versione 2.7f1 (04/06/2025)
+- (SIM) Aggiunta gestione qualità VMILL da impostazioni macchina. Tolto parametro 'CoeffVM'.
+- (GEN) Prima versione gestione tastatore
+- (GEN) Aggiunti parametri FMAXPINZE, MAXACC, MINACC configurabili da TS3. Ticket#2052
+
 Versione 2.7e1 (28/05/2025)
 - (SIM-GEN) Alla separazione si spostano i carrelli di 30mm aprendo il taglio. Ticket#2259,Ticket#2328
 

Version.lua

@@ -3,7 +3,7 @@
 
 local InfoCommon_STD_PP = {
    NAME = 'Common_ONE-PF',            -- nome script PP standard
-   VERSION = '2.7e1',                 -- versione script
+   VERSION = '2.7f1',                 -- versione script
    MIN_MACH_VER_PP_COMMON = '2.5k1'   -- versione minima kernel
 }