Controllo collisione tra utensile e TOP testa C. Rilasciare dopo che è stata pubblicata nuova versioen CAM5 27j1

Common_FAST.mlpe

@@ -7,9 +7,6 @@ EgtEnableDebug( false)
 -- carico librerie
 local BD = require( 'BeamData')
 
-LONG_TOOL_MINLEN = 221
-BIG_TOOL_DIAM = 300
-
 ---------------------------------------------------------------------
 -- *** GENERATION ***
 ---------------------------------------------------------------------
@@ -118,7 +115,8 @@ function OnSimulStart()
                      { Grp = 'V', Sub = 'COLLISION', Name = 'VOL2'},
                      { Grp = 'PV', Sub = 'COLLISION', Name = 'VOL'},
                      { Grp = 'Base', Sub = 'COLLISION', Name = 'SIDE1'},
-                     { Grp = 'Base', Sub = 'COLLISION', Name = 'SIDE2'}}
+                     { Grp = 'Base', Sub = 'COLLISION', Name = 'SIDE2'},
+                     { Grp = 'C', Sub = 'COLLISION2', Name = 'C_TOP'}}
    EgtOutLog( 'MCODET Objects :', 4)
    local nMcdNullCnt = 0
    for i = 1, #McdData do

Essetre-FASTrl.mlde

@@ -10,9 +10,9 @@
 require( 'EmtGenerator')
 EgtEnableDebug( false)
 
-PP_VER = '2.7i2'
-PP_NVER = '2.7.9.2'
-MIN_MACH_VER = '2.5k1'
+PP_VER = '2.7j1_DEV1'
+PP_NVER = '2.7.9.4'
+MIN_MACH_VER = '2.7j1'
 MACH_NAME = string.match( EgtGetCurrMachineDir(), "[^\\]+$")  -- si ricava il nome della macchina dal direttorio
 
 -- Carico i dati globali
@@ -76,9 +76,12 @@ BeamHeightForFixRot = 9999                     -- per abilitare assegnare 500
 NewTopC = true
 SafeXRotAxes = -150
 AggreBlockHaus = false
-EstimationRapidMultiplier = 1
 SecondToolChanger = false
+EstimationRapidMultiplier = 1
 
+-- costanti dimensioni utensili
+LONG_TOOL_MINLEN = 221
+BIG_TOOL_DIAM = 300
 
 -- leggo e aggiorno con parametri da BeamData
 if BD then
@@ -144,8 +147,9 @@ if EgtExistsFile( sData) then
          if Machine.Offsets.MINACC then MinAcc = Machine.Offsets.MINACC end
          if Machine.Offsets.NEWTOPC then NewTopC = ( Machine.Offsets.NEWTOPC == 1) end
          if Machine.Offsets.AGGRE_BH then AggreBlockHaus = ( Machine.Offsets.AGGRE_BH == 1) end
-         if Machine.Offsets.COEFF_STIMATEMPI and Machine.Offsets.COEFF_STIMATEMPI > 0 then EstimationRapidMultiplier = Machine.Offsets.COEFF_STIMATEMPI end
          if Machine.Offsets.SEC_TC then SecondToolChanger = ( Machine.Offsets.SEC_TC == 1) end
+         if Machine.Offsets.COEFF_STIMATEMPI and Machine.Offsets.COEFF_STIMATEMPI > 0 then EstimationRapidMultiplier = Machine.Offsets.COEFF_STIMATEMPI end
+         if Machine.Offsets.MAX_HEIGHT_ROT_B_ABOVE then BeamHeightForFixRot = Machine.Offsets.MAX_HEIGHT_ROT_B_ABOVE end
       end
    end
 end
@@ -199,7 +203,7 @@ local CId = EmtAxis {
       Stroke = {MinC, MaxC},
       Home = 0,
       Geo = 'C_AXIS/GEO',
-      Aux = {'C_AXIS/SOLID', 'C_AXIS/COLLISION'}}
+      Aux = {'C_AXIS/SOLID', 'C_AXIS/COLLISION', 'C_AXIS/COLLISION2'}}
 if NewTopC then
    local vtMove = Vector3d( 65,0,0)
    local SolidArmId = EgtGetFirstNameInGroup( EgtGetFirstNameInGroup( CId, 'SOLID'), 'ARM')
@@ -214,9 +218,13 @@ if NewTopC then
    local CollTopId = EgtGetFirstNameInGroup( EgtGetFirstNameInGroup( CId, 'COLLISION'), 'TOP')
    EgtMove( CollTopId, vtMove, GDB_RT.GLOB)
    EgtSetName( CollTopId, 'BOX')
+   local RefId = CollTopId + EgtGetInfo( CollTopId, 'Frame', 'i')
+   EgtSetInfo( RefId, 'CollSkip', 'C_TOP')
 else
    local CollTopId = EgtGetFirstNameInGroup( EgtGetFirstNameInGroup( CId, 'COLLISION'), 'TOP')
    EgtSetName( CollTopId, 'BOX')
+   local RefId = CollTopId + EgtGetInfo( CollTopId, 'Frame', 'i')
+   EgtSetInfo( RefId, 'CollSkip', 'C_TOP')
 end
 EmtAxis {
       Name = 'B',
@@ -634,24 +642,33 @@ PVLightId = EgtGetFirstNameInGroup( EgtGetFirstNameInGroup( PVId, 'SOLID') or GD
 ---------------------------------------------------------------------
 function OnSetHead()
    -- se testa lama
-   if EMC.HEAD == 'H2' then
-      EmtModifyAxisDirection( 'B', VectorFromRotated( X_AX(), Z_AX(), -SawCOffs))
-      EmtModifyAxisHome( 'C', 0)
-   -- se sega a catena
-   elseif EMC.HEAD == 'H3' then
-      EmtModifyAxisDirection( 'B', X_AX())
-      EmtModifyAxisHome( 'C', 180)
-      local dDist = EgtIf( EMC.DIST and abs( EMC.DIST) > 1, EMC.DIST, ChSawLen)
-      EmtModifyExitPosition( EMC.HEAD, EMC.EXIT, Point3d( 0, 0, -dDist))
-      if not EMC.VER or EMC.VER < '2.5h2' then
-         local vtMove = Point3d( 0, 0, -dDist) - Point3d( EMC.EXITPOS)
-         local ExitId = EgtGetFirstNameInGroup( EgtGetHeadId( EMC.HEAD), 'T'..tostring( EMC.EXIT))
-         EgtMove( ExitId, vtMove)
+   if EMC.HEAD == 'H1' then
+      if EMC.TOTLEN and EMC.TOTLEN < LONG_TOOL_MINLEN then
+         EmtModifyAxisStroke( 'B', {MinB, MaxB})
+      else
+         EmtModifyAxisStroke( 'B', {-140, 140})
       end
-   -- altrimenti
    else
-      EmtModifyAxisDirection( 'B', X_AX())
-      EmtModifyAxisHome( 'C', 0)
+      EmtModifyAxisStroke( 'B', {MinB, MaxB})
+      if EMC.HEAD == 'H2' then
+         EmtModifyAxisDirection( 'B', VectorFromRotated( X_AX(), Z_AX(), -SawCOffs))
+         EmtModifyAxisHome( 'C', 0)
+      -- se sega a catena
+      elseif EMC.HEAD == 'H3' then
+         EmtModifyAxisDirection( 'B', X_AX())
+         EmtModifyAxisHome( 'C', 180)
+         local dDist = EgtIf( EMC.DIST and abs( EMC.DIST) > 1, EMC.DIST, ChSawLen)
+         EmtModifyExitPosition( EMC.HEAD, EMC.EXIT, Point3d( 0, 0, -dDist))
+         if not EMC.VER or EMC.VER < '2.5h2' then
+            local vtMove = Point3d( 0, 0, -dDist) - Point3d( EMC.EXITPOS)
+            local ExitId = EgtGetFirstNameInGroup( EgtGetHeadId( EMC.HEAD), 'T'..tostring( EMC.EXIT))
+            EgtMove( ExitId, vtMove)
+         end
+      -- altrimenti
+      else
+         EmtModifyAxisDirection( 'B', X_AX())
+         EmtModifyAxisHome( 'C', 0)
+      end
    end
 end
 
@@ -713,13 +730,13 @@ function SetFloatPos( sHead, dPos)
    -- recupero Id testa
    local nHeadId = EgtGetHeadId( sHead)
    if not nHeadId then return false end
-   -- se ci sono entit� flottanti nel ToolHolder
+   -- se ci sono entita' flottanti nel ToolHolder
    local nRefId = EgtGetFirstNameInGroup( nHeadId, '_T1')
    local vtTool = EgtFR( nRefId, GDB_ID.ROOT):getVersZ() 
    local nObjId =  EgtGetFirstGroupInGroup( EgtGetFirstNameInGroup( nHeadId, 'T1'))
    local FloatEntities = EgtGetInfoInGroup( nObjId, 'Float')
    if FloatEntities and #FloatEntities > 0 then
-      -- il porta-utensile flottante non pu� comprimersi pi� di 10mm
+      -- il porta-utensile flottante non puo' comprimersi piu' di 10mm
       if dPos > 10 then
          local sErr = 'Floating Ring compressed more than 10mm'
          EmtSetLastError( 1222, sErr)
@@ -728,7 +745,7 @@ function SetFloatPos( sHead, dPos)
       local dFloat = EgtGetInfo( FloatEntities[1], 'Float', 'd')
       if abs( dPos - dFloat) > 10 * GEO.EPS_SMALL then
          local vtMove = ( dPos - dFloat) * vtTool
-         -- sposto tutte le entit� flottanti
+         -- sposto tutte le entita' flottanti
          for i = 1, #FloatEntities do
             EgtMove( FloatEntities[i], vtMove, GDB_RT.GLOB)
             EgtSetInfo( FloatEntities[i], 'Float', dPos)

UpdateLog.txt

@@ -1,5 +1,8 @@
            ==== Common_FAST Update Log ====
 
+Versione 2.7i3 (23/09/2025)
+- (MLDE-ALL) Spostate costanti dimensioni utensili in MLDE.
+
 Versione 2.7i2 (17/09/2025)
 - (EST) Stima tempi considerando accelerazioni
 - (SIM) Prelievo e deposito motosega con gli angoli comunicati da Essetre

Version.lua

@@ -3,7 +3,7 @@
 
 local InfoCommon_STD_PP = {
    NAME = 'Common_FAST',            -- nome script PP standard
-   VERSION = '2.7i2',                 -- versione script
+   VERSION = '2.7i3',                 -- versione script
    MIN_MACH_VER_PP_COMMON = '2.5k1'   -- versione minima kernel
 }