Aggiunti commenti ad ultima modifica

BatchProcessNew.lua

@@ -277,6 +277,15 @@ if bToProcess then
             else
                vBeam[i].Box = b3Solid
             end
+            if BD.MAX_LENGTH and BD.MAX_LENGTH > 10 and b3Solid:getDimX() > BD.MAX_LENGTH then
+               local sOut = 'Piece-Length ('  .. EgtNumToString( b3Solid:getDimX(), 2) .. ') ' ..
+                         'out of machine limits (' .. EgtNumToString( BD.MAX_LENGTH, 2) .. ') '
+               BEAM.ERR = 17
+               BEAM.MSG = sOut
+               WriteErrToLogFile( BEAM.ERR, BEAM.MSG)
+               PostErrView( BEAM.ERR, BEAM.MSG)
+               return
+            end
          end
          -- Assegno lunghezza della barra
          dBarLen = vBeam[1].Box:getDimX() + 10
@@ -330,6 +339,15 @@ if bToProcess then
          else
             vBeam[i].Box = b3Solid
          end
+         if BD.MAX_LENGTH and BD.MAX_LENGTH > 10 and b3Solid:getDimX() > BD.MAX_LENGTH then
+            local sOut = 'Piece-Length ('  .. EgtNumToString( b3Solid:getDimX(), 2) .. ') ' ..
+                         'out of machine limits (' .. EgtNumToString( BD.MAX_LENGTH, 2) .. ') '
+            BEAM.ERR = 17
+            BEAM.MSG = sOut
+            WriteErrToLogFile( BEAM.ERR, BEAM.MSG)
+            PostErrView( BEAM.ERR, BEAM.MSG)
+            return
+         end
       end
    end
 

LuaLibs/BeamExec.lua

@@ -1641,7 +1641,8 @@ local function SetCutsOnFrontMortises( vProc)
                   -- verifico se i piani coincidono
                   local bSamePlane = ( ptC1 and vtN1 and ptC2 and vtN2 and AreSameVectorApprox( vtN1, vtN2) and ( ptC2 - ptC1) * vtN1 < 1.0)
                   if bSamePlane then
-                     vProc[i].CutFront = vProc[j].Id
+                     --vProc[i].CutFront = vProc[j].Id
+                     vProc[j].bSkipCut = true
                   end
                   -- log
                   local sMsg = string.format( 'Cut %d meet Mortise %d', vProc[i].Id, vProc[j].Id) .. EgtIf( bSamePlane, ' with same plane', '')
@@ -1658,7 +1659,8 @@ local function SetCutsOnFrontMortises( vProc)
                   -- verifico se i piani coincidono
                   local bSamePlane = ( ptC1 and vtN1 and ptC2 and vtN2 and AreSameVectorApprox( vtN1, vtN2) and ( ptC2 - ptC1) * vtN1 < 1.0)
                   if bSamePlane then
-                     vProc[i].CutFront = vProc[j].Id
+                     --vProc[i].CutFront = vProc[j].Id
+                     vProc[j].bSkipCut = true
                   end
                   -- log
                   local sMsg = string.format( 'Cut %d meet DtMortise %d', vProc[i].Id, vProc[j].Id) .. EgtIf( bSamePlane, ' with same plane', '')

LuaLibs/ProcessCut.lua

@@ -559,16 +559,20 @@ local function MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, b
 
          -- caso standard
          else
+            -- se necessario aggiungo tagli obliqui per cubettare pezzi lunghi che potrebbero cadere sul motore
             if ( i % 2) == 0 and Proc.Fct == 1 and AreSameOrOppositeVectorApprox( vtO, Z_AX()) then
                local vtOrthoVert = vtN ^ vtO
+               -- inverte direzione superfici per corretta direzione SCC
                if ( vtN:getY() > 0 and vtOrthoVert:getY() > 0) or ( vtN:getY() < 0 and vtOrthoVert:getY() < 0) then
                   vtOrthoVert = -vtOrthoVert
                end
                local Frame = Frame3d( ptC, vtN, vtO)
                local b3Fac = EgtGetBBoxRef( vCuts[i][1], GDB_BB.STANDARD, Frame)
+               -- se cubetto più grande di MAX_DIM_DICE
                if abs( b3Fac:getDimY() - BD.MAX_DIM_DICE) > 10 * GEO.EPS_SMALL then
                   local nVerticalCuts = ceil( b3Fac:getDimY() / ( BD.MAX_LEN_DICE)) - 1
                   local dVerticalSliceDist = b3Fac:getDimY() / ( nVerticalCuts + 1)
+                  -- selezione utensile
                   local dSawDiam = 400
                   if EgtMdbSetCurrMachining( sCutting) then
                      local sTuuid = EgtMdbGetCurrMachiningParam( MCH_MP.TUUID)
@@ -576,7 +580,7 @@ local function MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, b
                         dSawDiam = EgtTdbGetCurrToolParam( MCH_TP.DIAM) or dSawDiam
                      end
                   end
-                  -- tagli verticali
+                  -- crea faccia per tagli verticali e le taglia a dimensione corretta
                   for k = 1, nVerticalCuts do
                      local nFaceUse = BL.GetNearestOrthoOpposite( vtN)
                      local dVerticalCutOffset = dVerticalSliceDist * k
@@ -585,6 +589,7 @@ local function MakeFromTop( sCutting, Proc, nPhase, nRawId, nPartId, dOvmHead, b
                      local ptVertCut = EgtSurfTmFacetCenter( nMergedParallelSurfId, 0, GDB_ID.ROOT)
                      ptVertCut = ptVertCut + ( -b3Fac:getDimY()/2 + dVerticalCutOffset) * vtOrthoVert
                      local nSurfId = EgtSurfTmPlaneInBBox( nAddGrpId, ptVertCut, vtOrthoVert, b3Raw, GDB_RT.GLOB)
+                     -- se non è il primo taglio parallelo taglia anche le superfici con la faccia parallela precedente
                      if i ~= 2 then
                         local nMergedPreviousParallelSurfId = EgtSurfTmBySewing( nAddGrpId, vCuts[i-2], false)
                         local ptOnPreviousParallelSurf = EgtSurfTmFacetCenter( nMergedPreviousParallelSurfId, 0, GDB_ID.ROOT)

LuaLibs/ProcessDtMortise.lua

@@ -236,7 +236,7 @@ function ProcessDtMortise.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
    -- verifico se frontale
    local bFront = ( Proc.Prc == 56)
    -- se mortasa di fronte, eseguo il taglio della faccia
-   if bFront then
+   if bFront and not Proc.bSkipCut then
       -- verifico esista la faccia di taglio
       local ptCutC, vtCutN = EgtSurfTmFacetCenter( Proc.Id, 1, GDB_ID.ROOT)
       if ptCutC and vtCutN and AreSameVectorApprox( vtExtr, vtCutN) then

LuaLibs/ProcessMortise.lua

@@ -467,7 +467,7 @@ function ProcessMortise.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
    end
 
    -- se mortasa di fronte, eseguo il taglio della faccia
-   if bFront then
+   if bFront and not Proc.bSkipCut then
       -- verifico esista la faccia di taglio
       local ptCutC, vtCutN = EgtSurfTmFacetCenter( Proc.Id, 1, GDB_ID.ROOT)
       if ptCutC and vtCutN and AreSameVectorApprox( vtExtr, vtCutN) then

Process.lua

@@ -89,6 +89,14 @@ local function MyProcessInputData()
       else
          vBeam[i].Box = b3Solid
       end
+      if BD.MAX_LENGTH and BD.MAX_LENGTH > 10 and b3Solid:getDimX() > BD.MAX_LENGTH then
+         local sOut = 'Lunghezza ('  .. EgtNumToString( b3Solid:getDimX(), 2) .. ') ' ..
+                      'oltre i limiti della macchina (' .. EgtNumToString( BD.MAX_LENGTH, 2) .. ') '
+         EgtOutLog( sOut)
+         EgtOutBox( sOut, 'Lavora Travi', 'WARNING')
+         EgtDraw()
+         return false
+      end
    end
    dRawW = vBeam[1].Box:getDimY()
    dRawH = vBeam[1].Box:getDimZ()