In Drill - Fori in doppio con utensili lunghi, corretto calcolo LastStep.

3.1h1

LuaLibs/BeamExec.lua

@@ -2300,7 +2300,7 @@ function BeamExec.ProcessFeatures()
       BD.IMPROVE_HEAD_TAIL_DRILLINGS = true
    end
    -- costanti per doppio
-   MIRROR_DRILLINGS_MIN_DISTANCE = 40
+   MIRROR_DRILLINGS_MIN_DISTANCE = 25 --TODO spostare la variabile MinDistToolX1X2 nel BeamData e usare quella
    MIRROR_POCKETS_MIN_DISTANCE = EgtIf( BD.DOWN_HEAD, 35, 50)
    -- verifica se possibile rotazione di 90 gradi
    BD.ROT90 = BD.ROT90 and Verify90DegRotation( EgtGetFirstRawPart())
@@ -2555,7 +2555,7 @@ function BeamExec.ProcessFeatures()
             local nNextRawId = EgtGetNextRawPart( nRawId)
             if nNextRawId  and  EgtGetPartInRawPartCount( nNextRawId) == 0  and  EgtGetRawPartBBox( nNextRawId):getDimX() < BD.MinRaw then
                EgtRemoveRawPartFromCurrPhase( nNextRawId)
-            end   
+            end
          end
          nPhase = EgtGetCurrPhase()
          nDispId = EgtGetPhaseDisposition( nPhase)

LuaLibs/BeamLib.lua

@@ -1448,7 +1448,7 @@ function BeamLib.GetToolFromMachining( sMachiningName)
             Tool.Thickness = EgtTdbGetCurrToolParam( MCH_TP.THICK) or 0
             Tool.CornerRadius = EgtTdbGetCurrToolParam( MCH_TP.CORNRAD) or 0
          -- fresa (TODO al momento aggiunte solo le informazioni che servono)
-         elseif Tool.Type == MCH_TY.MILL_STD or MCH_TY.MILL_NOTIP then
+         elseif Tool.Type == MCH_TY.MILL_STD or Tool.Type == MCH_TY.MILL_NOTIP then
             if BD.GetSetupInfo then
                Tool.IsOnAggregate = BD.GetSetupInfo( EgtTdbGetCurrToolParam( MCH_TP.HEAD)).bToolOnAggregate
             else
@@ -1459,6 +1459,8 @@ function BeamLib.GetToolFromMachining( sMachiningName)
             if Tool.StemDiameter > Tool.Diameter + GEO.EPS_SMALL then
                Tool.MaxDepth = Tool.MaxDepth - BD.COLL_SIC
             end
+         elseif Tool.Type == MCH_TY.DRILL_STD or Tool.Type == MCH_TY.DRILL_LONG then
+            Tool.Length = EgtTdbGetCurrToolParam( MCH_TP.LEN) or 0
          -- altri utensili al momento non previsti
          else
             error( 'Wrong tool type')

LuaLibs/ProcessDrill.lua

@@ -559,7 +559,7 @@ function ProcessDrill.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
    nFac, CosB, vFaces = GetHoleStartData( ptCen, vtExtr, b3Solid)
    -- Calcolo acciorciamento affondamento utile per evitare collisione portautensile con faccia
    TgA = CosB / sqrt( 1 - CosB * CosB)
-   dSubL = ( dDiamTh / 2 + ( Proc.Diam - dToolDiam) / 2 + 4) * TgA
+   local dSubL = ( dDiamTh / 2 + ( Proc.Diam - dToolDiam) / 2 + 4) * TgA
    -- Per fori molto inclinati ( < 30 gradi) si usa la testa della macchina per l'accorciamento. Fast esclusa
    if BD.C_SIMM and CosB > 0.866  then
       dSubL = ( 190 / 2 + ( Proc.Diam - dToolDiam) / 2 + 4) * TgA - 116
@@ -667,7 +667,13 @@ function ProcessDrill.Make( Proc, nPhase, nRawId, nPartId, dCurrOvmH)
             end
          end
       else
-         sUserNotes = EgtSetValInNotes( sUserNotes, 'LastStep', MIRROR_DRILLINGS_MIN_DISTANCE / 2 + 10)
+         local Tool = BL.GetToolFromMachining( sDrilling)
+         local dDrillbitTipLength_H1 = dMaxToolLength - Tool.Length
+         local sNotes = EgtTdbGetCurrToolParam( MCH_TP.USERNOTES)
+         EgtTdbSetCurrTool( EgtGetValInNotes( sNotes, 'DOUBLE', 's') or Tool.Name)
+         local dDrillbitTipLength_H2 = ( EgtTdbGetCurrToolParam( MCH_TP.TOTLEN) or 0) - ( EgtTdbGetCurrToolParam( MCH_TP.LEN) or 0)
+         EgtTdbSetCurrTool( Tool.Name)
+         sUserNotes = EgtSetValInNotes( sUserNotes, 'LastStep', ( MIRROR_DRILLINGS_MIN_DISTANCE + dDrillbitTipLength_H1 + dDrillbitTipLength_H2 + 10) / 2 + 1)
       end
       if dDepth > Proc.MachDepthDouble + 10 * GEO.EPS_SMALL then
          sMyWarn = 'Warning in double head drilling : depth (' .. EgtNumToString( dDepth, 1) .. ') reduced to (' .. EgtNumToString( Proc.MachDepthDouble, 1) .. ') to match H2 max tool depth'

LuaLibs/ProcessLapJoint.lua

@@ -4914,6 +4914,30 @@ local function ManageAntiSplintBySaw( Proc, b3Raw, b3Solid, bIsU, vtN, nFacInd,
                      EgtSetMachiningParam( MCH_MP.INVERT, not bInvert)
                      -- setto l'offset pari allo spessore lama
                      EgtSetMachiningParam( MCH_MP.OFFSL, -dSawThick)
+                     local LeadIn = {
+                        dStartAddLen = EgtGetMachiningParam( MCH_MP.STARTADDLEN),
+                        dLeadInTangDist = EgtGetMachiningParam( MCH_MP.LITANG),
+                        dLeadInPerpDist = EgtGetMachiningParam( MCH_MP.LIPERP),
+                        dLeadInElev = EgtGetMachiningParam( MCH_MP.LIELEV),
+                        dLeadInCompLen = EgtGetMachiningParam( MCH_MP.LICOMPLEN)
+                     }
+                     local LeadOut = {
+                        dEndAddLen = EgtGetMachiningParam( MCH_MP.ENDADDLEN),
+                        dLeadOutTangDist = EgtGetMachiningParam( MCH_MP.LOTANG),
+                        dLeadOutPerpDist = EgtGetMachiningParam( MCH_MP.LOPERP),
+                        dLeadOutElev = EgtGetMachiningParam( MCH_MP.LOELEV),
+                        dLeadOutCompLen = EgtGetMachiningParam( MCH_MP.LOCOMPLEN)
+                     }
+                     EgtSetMachiningParam( MCH_MP.STARTADDLEN, LeadOut.dEndAddLen)
+                     EgtSetMachiningParam( MCH_MP.LITANG, LeadOut.dLeadOutTangDist)
+                     EgtSetMachiningParam( MCH_MP.LIPERP, LeadOut.dLeadOutPerpDist)
+                     EgtSetMachiningParam( MCH_MP.LIELEV, LeadOut.dLeadOutElev)
+                     EgtSetMachiningParam( MCH_MP.LICOMPLEN, LeadOut.dLeadOutCompLen)
+                     EgtSetMachiningParam( MCH_MP.ENDADDLEN, LeadIn.dStartAddLen)
+                     EgtSetMachiningParam( MCH_MP.LOTANG, LeadIn.dLeadInTangDist)
+                     EgtSetMachiningParam( MCH_MP.LOPERP, LeadIn.dLeadInPerpDist)
+                     EgtSetMachiningParam( MCH_MP.LOELEV, LeadIn.dLeadInElev)
+                     EgtSetMachiningParam( MCH_MP.LOCOMPLEN, LeadIn.dLeadInCompLen)
                   end
                end
             end