Preparazione lista direttori macchina

- correzione versione.

CompoWindow/CompoListPage/CompoListPageVM.vb

@@ -108,6 +108,8 @@ Public Class CompoListPageVM
       End Get
       Set(value As Boolean)
          If m_SideAngle_IsChecked OrElse m_Drip_IsChecked Then Return
+         CompoWindowMap.refCompoSceneHostV.m_SelListHole.Clear()
+         CompoWindowMap.refCompoSceneHostV.m_DeselectListHole.Clear()
          m_FiloTop_IsChecked = value
          If value Then
             ' Se non ci sono loop interni, imposto quello esterno
@@ -122,6 +124,7 @@ Public Class CompoListPageVM
             SideEntityControl = New SideEntityControlV(m_SideEntityControlVM)
             m_CompoListVisibility = Visibility.Collapsed
             m_CompoBackVisibility = Visibility.Collapsed
+            CompoWindowMap.refCompoSceneHostV.SetRefSideEntityControlVM(m_SideEntityControlVM)
          Else
             m_SideEntityControlVM.Close()
             m_SideEntityControlVM = Nothing

CompoWindow/CompoParamPage/CompoParamPageV.xaml

@@ -22,8 +22,8 @@
                 </ToggleButton.Content>
             </ToggleButton>
             
-            <!--FiloTop--><!--
-            <ToggleButton Padding="0"
+            <!--FiloTop-->
+            <!--<ToggleButton Padding="0"
                        IsChecked="{Binding FiloTop_IsChecked}"
                        Style="{StaticResource CompoWindow_ToggleButton}"
                        Margin="0,0,1.75,0"

CompoWindow/CompoParamPage/CompoParamPageVM.vb

@@ -67,8 +67,6 @@ Public Class CompoParamPageVM
    Private m_AlzAndFront_Visibility As Visibility 
    Public Property AlzAndFront_Visibility As Visibility
       Get
-         '' !!!! Temporaneamente in attesa di completamento Frontalini e alzatine !!!!
-         'Return Visibility.Collapsed 
          Return m_AlzAndFront_Visibility
       End Get
       Set(value As Visibility)
@@ -750,6 +748,50 @@ Public Class CompoParamPageVM
       NotifyPropertyChanged("MsgColor")
    End Sub
 
+   Private Sub UpdateInLoopReference(nCmp As Integer)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               Dim LocalList As New List(Of Integer) From {nIdInLoop}
+               If IsNothing(m_SideEntityControlVM) Then
+                  m_SideEntityControlVM = New SideEntityControlVM(SideEntityControlVM.CallingWindowOpt.COMPO,
+                                                            CompoWindowMap.refCompoSceneHostV.CompoScene,
+                                                            SideEntityControlVM.ModeOpt.FILOTOP)
+                  m_SideEntityControlVM.CreateFiloTopPreView(LocalList)
+               Else
+                  m_SideEntityControlVM.CreateFiloTopPreView(LocalList)
+               End If
+               EgtSetStatus(nLayFiloTop, GDB_ST.ON_)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
+   ' riceve la info "ID" della componente
+   Public Sub SetStatusVisibilityInLoopReference(nCmp As Integer, Status As GDB_ST)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               EgtSetStatus(nLayFiloTop, Status)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -867,6 +909,7 @@ Public Class CompoParamPageVM
             Dim nCmpInfo As Integer = 0
             If EgtGetInfo(nId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
                EgtSetStatus(nId, GDB_ST.OFF)
+               UpdateInLoopReference(nCmp)
                Exit While
             End If
             nId = EgtGetNextName(nId, "HoleLabels")

CompoWindow/CompoSceneHostV.xaml.vb

@@ -3,6 +3,11 @@ Imports EgtWPFLib5
 
 Public Class CompoSceneHostV
 
+   Public m_SelListHole As New List(Of Integer)
+   Public m_DeselectListHole As New List(Of Integer)
+
+   Private m_refSideEntityControlVM As SideEntityControlVM
+
    Private m_SelFromScene As Boolean = False
    Friend ReadOnly Property SelFromScene As Boolean
       Get
@@ -36,6 +41,10 @@ Public Class CompoSceneHostV
       EgtDraw()
    End Sub
 
+   Public Sub SetRefSideEntityControlVM(refSideEntityControl As SideEntityControlVM)
+      m_refSideEntityControlVM = refSideEntityControl
+   End Sub
+
    Private Sub PreInitializeScene()
       ' imposto colore di default
       Dim DefColor As New Color3d(0, 0, 0)
@@ -156,6 +165,8 @@ Public Class CompoSceneHostV
          Dim nCmpInfo As Integer = 0
          If EgtGetInfo(nHLId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
             EgtSetStatus(nHLId, GDB_ST.ON_)
+            ' nascondo eventuali FiloTop
+            CompoWindowMap.refCompoParamPageVM.SetStatusVisibilityInLoopReference(nCmp, GDB_ST.OFF)
             Exit While
          End If
          nHLId = EgtGetNextName(nHLId, "HoleLabels")
@@ -262,6 +273,8 @@ Public Class CompoSceneHostV
                      EgtRemoveInfo(nLayId, INFO_DEPTH)
                      EgtResetColor(nLayId)
                   End If
+                  m_DeselectListHole.Add(nLayId)
+                  m_SelListHole.Remove(nLayId)
                Else
                   Dim sLayName As String = ""
                   If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
@@ -272,12 +285,18 @@ Public Class CompoSceneHostV
                      EgtSetInfo(nLayId, INFO_DEPTH, SideAngleEntity.m_Parameter2)
                      EgtSetColor(nLayId, New Color3d(255, 255, 255))
                   End If
+                  m_SelListHole.Add(nLayId)
+                  m_DeselectListHole.Remove(nLayId)
                End If
                EgtDraw()
             End If
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      If Not IsNothing(m_refSideEntityControlVM) Then
+         m_refSideEntityControlVM.CreateFiloTopPreView(m_SelListHole)
+         m_refSideEntityControlVM.EraseFiloTopPreview(m_DeselectListHole)
+      End If
    End Sub
 
 #End Region    ' Events

Constants/ConstIni.vb

@@ -18,6 +18,7 @@ Module ConstIni
    Public Const S_GENERAL As String = "General"
    Public Const K_DEBUG As String = "Debug"
    Public Const K_LICENCE As String = "Licence"
+   Public Const K_NETKEY As String = "NetKey"
    Public Const K_USERLEVEL As String = "UserLevel"
    Public Const K_MAXINST As String = "MaxInstances"
    Public Const K_INSTANCES As String = "Instances"
@@ -103,6 +104,7 @@ Module ConstIni
    Public Const K_ENGRAVENUMBER2 As String = "EngraveNumber2"
    Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
    Public Const K_ENGRAVESHORT As String = "EngraveShort"
+   Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
    Public Const K_DRIPOFFSET As String = "DripOffset"
    Public Const K_DRIPOFFSET2 As String = "DripOffset2"
    Public Const K_DRIPDEPTH As String = "DripDepth"
@@ -110,6 +112,7 @@ Module ConstIni
    Public Const K_UNDERDRILLDEPTH As String = "UnderDrillDepth"
    Public Const K_FILOTOPOFFSET As String = "FiloTopOffset"
    Public Const K_FILOTOPDEPTH As String = "FiloTopDepth"
+   Public Const K_FILOTOPROUNDOFF As String = "FiloTopRoundOff"
 
    Public Const S_NEST As String = "Nest"
    Public Const K_DIRECT As String = "Direct"

EgtStoneLib/CamAuto.vb

@@ -99,6 +99,9 @@ Friend Module CamAuto
       Dim bOk As Boolean = True
       Dim nIdPart As Integer = EgtGetFirstPart()
       While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, "AUX_SPLIT_WJ")
+         EgtErase(IdAuxLayer)
          ' accedo al Layer OutLoop
          Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
          Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
@@ -111,6 +114,9 @@ Friend Module CamAuto
       Dim nRawId As Integer = CamAuto.GetCurrentRaw()
       nIdPart = EgtGetFirstPartInRawPart(nRawId)
       While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, "AUX_SPLIT_WJ")
+         EgtErase(IdAuxLayer)
          ' accedo al Layer OutLoop
          Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
          Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)

EgtStoneLib/ConstMach.vb

@@ -160,6 +160,7 @@ Module ConstMach
    Public Const NAME_PREVIEW As String = "PV"
    ' Info in layer contorno interno per FiloTop
    Public Const INFO_FILOTOP As String = "FiloTop"
+   Public Const INFO_ROUNDOFF As String = "RoundOff"
    ' Info in entità da tagliare per affondamento
    Public Const INFO_DEPTH As String = "Depth"
    Public Const INFO_DEPTH2 As String = "Depth2"
@@ -251,6 +252,12 @@ Module ConstMach
    Public Const SELECT_REGION_LAYER As String = "SelectRegion"
    ' Info in pezzo per stato rotazione
    Public Const INFO_PARTROT As String = "ROT"
+   ' Info in entità in OutLoop per indicare se è separata WaterJet
+   Public Const INFO_JOINTENTITY As String = "JoinEntity"
+   ' Nome layer per "*" inidcanti un lato separato nel taglio WaterJet
+   Public Const INFO_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
+   ' Info in OutLoop per punto inzio lavorazione WaterJet
+   Public Const INFO_START As String = "Start"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"

EgtStoneLib/CurrentMachine.vb

@@ -1415,6 +1415,16 @@ Friend Property sCurrMillNoTip As String
       OmagOFFICEMap.refMachinePanelVM.NotifyPropertyChanged(NameOf(OmagOFFICEMap.refMachinePanelVM.WjDb_Visibility))
    End Sub
 
+   ' recupro dalla lista delle macchine l'oggetto associato al nome indicato
+   Public Sub GetMachineClass(sMachineName As String)
+      For Each Item In OmagOFFICEMap.refMachinePanelVM.MachineList
+         If Item.Name = sMachineName Then
+            OmagOFFICEMap.refMachinePanelVM.SelectedMachine = Item
+            Exit For
+         End If
+      Next
+   End Sub
+
    Public Sub LoadWJMaterial(Optional bIsStart As Boolean = False)
       Dim TempCurrMat As Material = CurrMat
       ' Svuoto l'attuale lista di materiali e delle qualità

MachinePanel/MyMachinePanelVM.vb

@@ -95,8 +95,18 @@ Public Class MyMachinePanelVM
       OmagOFFICEMap.SetRefMachinePanelVM(Me)
       ' recupero cartella radice delle macchine
       m_sMachinesRoot = OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot
-      ' Carica macchine da cartella delle macchine
-      Machine.MachineListInit(m_sMachinesRoot, MachineList)
+      ' trasformo l'elenco dei direttori macchina in una stringa del tipo "..\Dir1\Example01|..\Dir2\|Example02"
+      Dim sMchRoots As String = m_sMachinesRoot
+
+      '' Carica macchine da cartella delle macchine
+      'For Each MachDir In OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRootList
+      '   sMchRoots &= MachDir & "|"
+      'Next
+      '' rimuovo dalla stringa l'ultimo carattere inserito
+      'sMchRoots = sMchRoots.Remove(sMchRoots.Length - 1, 1)
+
+      ' procedo ad inizializzare la classe → carico la lista "MachineList" che visualizzo per l'inserimento di nuvoi MachGroup
+      Machine.MachineListInit(sMchRoots, MachineList)
       ' Inizializzo valori visibilità parametri Db utensili e lavorazioni
       OmagOFFICETMDbParamVisibility.Init()
    End Sub

MainWindow/MainWindowM.vb

@@ -86,13 +86,29 @@ Public Class MainWindowM
          Return m_sTempDir
       End Get
    End Property
+
+   '------------------INIZIO Gestione elenco direttori macchine ------------------
+
+   Private m_sMachinesRootList As New List(Of String)
+   Friend ReadOnly Property sMachinesRootList As List(Of String)
+      Get
+         Return m_sMachinesRootList
+      End Get
+   End Property
+
+   '------------------FINE Gestione elenco direttori macchine ------------------
+
    Private m_sMachinesRoot As String
-   Friend ReadOnly Property sMachinesRoot As String
+   Friend Property sMachinesRoot As String
       Get
          Return m_sMachinesRoot
       End Get
+      Set(value As String)
+         m_sMachinesRoot = value
+      End Set
    End Property
    Private m_sToolMakersDir As String
+
    Friend ReadOnly Property sToolMakersDir As String
       Get
          Return m_sToolMakersDir
@@ -172,6 +188,18 @@ Public Class MainWindowM
       If GetMainPrivateProfileString(S_MACH, K_MACHINESDIR, "", m_sMachinesRoot) = 0 Then
          m_sMachinesRoot = m_sDataRoot & "\" & MACHINES_DFL_DIR
       End If
+
+      ' carico eleco dei direttori
+      If Not String.IsNullOrEmpty(m_sMachinesRoot) Then m_sMachinesRootList.Add(m_sMachinesRoot)
+      Dim nIndexDir As Integer = 1
+      Dim sCurrMachineDir As String = String.Empty
+      While GetMainPrivateProfileString(S_MACH, K_MACHINESDIR & nIndexDir.ToString, "", sCurrMachineDir) <> 0
+         If VerifyMachineIsUnique(sCurrMachineDir) Then
+            m_sMachinesRootList.Add(sCurrMachineDir)
+         End If
+         nIndexDir += 1
+      End While
+
       ' Impostazione direttorio per toolmakers
       If GetMainPrivateProfileString(S_MACH, K_TOOLMAKERSDIR, "", m_sToolMakersDir) = 0 Then
          m_sToolMakersDir = m_sDataRoot & "\" & TOOLMAKERS_DFL_DIR
@@ -192,11 +220,13 @@ Public Class MainWindowM
       Dim sNestKey As String = ""
       EgtUILib.GetPrivateProfileString( S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
       EgtSetNestKey( sNestKey)
+      Dim bNetHwKey As Boolean = ( GetMainPrivateProfileInt(S_GENERAL, K_NETKEY, 0) = 1)
+      EgtSetNetHwKey( bNetHwKey)
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace( sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2405, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2405, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2406, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2406, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.OFFICE_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -267,12 +297,26 @@ Public Class MainWindowM
       EgtOutLog("KeyOptions : " & bKey.ToString() & " " & m_nKeyOptions.ToString() & " " & bProd.ToString())
       EgtPHOTOLib.MainData.SetConfigDir(m_sConfigDir)
       EgtPHOTOLib.MainData.SetKeyLevel(m_nKeyLevel)
-      EgtPHOTOLib.MainData.SetKeyOptions( CInt( m_nKeyOptions))
+      EgtPHOTOLib.MainData.SetKeyOptions(CInt(m_nKeyOptions))
       EgtPHOTOLib.MainData.SetPhotoDir(m_sPhotoDir)
       EgtPHOTOLib.MainData.SetBackUpDir(m_sBackUpDir)
       EgtPHOTOLib.MainData.SetIsOmagOFFICE(True)
+      EgtPHOTOLib.MainData.SetUser(Environment.MachineName & "\" & Environment.UserName & " (" & nInstance.ToString() & ")")
+      Dim sIdKey As String = String.Empty
+      EgtGetKeyInfo(sIdKey)
+      EgtPHOTOLib.MainData.SetKey(sIdKey)
    End Sub
 
+   ' verifico che il nome da inserire non esista già in elenco
+   Private Function VerifyMachineIsUnique(sMachDir As String) As Boolean
+      For Each sDir As String In m_sMachinesRootList
+         If sDir.ToLower.Trim = sMachDir.ToLower.Trim Then
+            Return False
+         End If
+      Next
+      Return True
+   End Function
+
    Private Sub ManageInstance()
       Dim bCreated As Boolean
       Try

My Project/AssemblyInfo.vb

@@ -69,6 +69,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.5.1")>
-<Assembly: AssemblyFileVersion("2.4.5.1")>
+<Assembly: AssemblyVersion("2.4.6.1")>
+<Assembly: AssemblyFileVersion("2.4.6.1")>
 

MyMachGroupPanel/MyMachGroupPanelVM.vb

@@ -38,8 +38,7 @@ Public Class MyMachGroupPanelVM
       GetMainPrivateProfileString(S_MACH, K_CURRMACH, "", sDefaultMachine)
       ' Creo riferimento a questa classe in OmagOFFICEMap
       OmagOFFICEMap.SetRefMachGroupPanelVM(Me)
-      InitMachGroupPanel(True, OmagOFFICEMap.refMachinePanelVM.MachineList.ToList(),
-                     sDefaultMachine, BASE_MACH_GROUP & "1")
+      InitMachGroupPanel(True, OmagOFFICEMap.refMachinePanelVM.MachineList.ToList(), sDefaultMachine, BASE_MACH_GROUP & "1")
    End Sub
 
 #End Region    ' CONSTRUCTOR
@@ -99,6 +98,8 @@ Public Class MyMachGroupPanelVM
       ' Salvo macchina del gruppo come nuovo default
       Dim sCurrMachName As String = String.Empty
       EgtGetCurrMachineName(sCurrMachName)
+      CurrentMachine.GetMachineClass(sCurrMachName)
+      OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot = Path.GetDirectoryName(OmagOFFICEMap.refMachinePanelVM.SelectedMachine.DirPath)
       WriteMainPrivateProfileString(S_MACH, K_CURRMACH, sCurrMachName)
       ' Ricarico la macchina corrente
       InitCurrentMachine(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, sCurrMachName,
@@ -152,6 +153,8 @@ Public Class MyMachGroupPanelVM
    Public Overrides Function OnPostSetCurrMachGroup() As Boolean
       ' Imposto vista solo tavola
       EgtSetMachineLook(MCH_LOOK.TAB)
+      CurrentMachine.GetMachineClass(SelectedMachGroup.Machine)
+      OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot = Path.GetDirectoryName(OmagOFFICEMap.refMachinePanelVM.SelectedMachine.DirPath)
       ' Ricarico la macchina corrente
       InitCurrentMachine(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, SelectedMachGroup.Machine,
                          OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.PRODUCTION_LINE),

MySceneHost/MySceneHostVM.vb

@@ -223,6 +223,8 @@ Public Class MySceneHostVM
    End Sub
 
    Private Function ExecExport(sDirDest As String) As Boolean
+      ' salvo il nome della macchina correntemente selezionata
+      Dim CurrentSelectedMachGroup As String = OmagOFFICEMap.refMachGroupPanelVM.SelectedMachGroup.Machine
       ' Path completa del progetto corrente
       Dim sFilePath As String = String.Empty
       EgtGetCurrFilePath(sFilePath)
@@ -282,10 +284,10 @@ Public Class MySceneHostVM
                File.Copy(sOriPath, sNewPath, True)
             Catch ex As Exception
                bOk = False
-               EgtOutLog( "Slab image not found :" & sOriPath)
+               EgtOutLog("Slab image not found :" & sOriPath)
             End Try
             EgtSetName(nPhotoId, PHOTO_NAME)
-            EgtChangePhotoCenterAsFlatScan( nPhotoId)
+            EgtChangePhotoCenterAsFlatScan(nPhotoId)
          End If
          ' Elimino gli altri gruppi di lavorazioni 
          For Each nMGrpId As Integer In vMchGrps
@@ -308,6 +310,27 @@ Public Class MySceneHostVM
          Dim nMarkId As Integer = EgtCreateGroup(GDB_ID.ROOT)
          EgtSetName(nMarkId, NAME_PROJMARK)
          EgtSetLevel(nMarkId, GDB_LV.SYSTEM)
+         ' Imposto la macchina: salvo l'altezza della sovratavola
+         Dim sMachine As String = String.Empty
+         EgtGetInfo(nMchGrpId, "Machine", sMachine)
+         If Not String.IsNullOrEmpty(sMachine) Then
+            CurrentMachine.GetMachineClass(sMachine)
+            OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot = Path.GetDirectoryName(OmagOFFICEMap.refMachinePanelVM.SelectedMachine.DirPath)
+            InitCurrentMachine(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, sMachine,
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.PRODUCTION_LINE),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_MILL),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_POLISHING),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_WJ),
+                         True)
+            Select Case GetCurrentTable()
+               Case 3
+                  EgtSetInfo(nMarkId, K_TAB3_ADDITIONALTABLE, CurrentMachine.dAdditionalTable)
+               Case 2
+                  EgtSetInfo(nMarkId, K_TAB2_ADDITIONALTABLE, CurrentMachine.dAdditionalTable)
+               Case Else
+                  EgtSetInfo(nMarkId, K_ADDITIONALTABLE, CurrentMachine.dAdditionalTable)
+            End Select
+         End If
          Dim nReducedCut As Integer = 1
          EgtGetInfo(nMchGrpId, INFO_REDUCEDCUT, nReducedCut)
          EgtSetInfo(nMarkId, INFO_REDUCEDCUT, nReducedCut)
@@ -326,6 +349,15 @@ Public Class MySceneHostVM
          ' Salvo il file
          If Not EgtSaveFile(sFileDest, NGE.CMPTEXT) Then bOk = False
       Next
+      CurrentMachine.GetMachineClass(CurrentSelectedMachGroup)
+      OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot = Path.GetDirectoryName(OmagOFFICEMap.refMachinePanelVM.SelectedMachine.DirPath)
+      ' reimposto la macchina corrente
+      InitCurrentMachine(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, CurrentSelectedMachGroup,
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.PRODUCTION_LINE),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_MILL),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_POLISHING),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_WJ),
+                         True)
       ' Distruggo il contesto corrente e ripristino quello originale
       EgtSetCurrentContext(nCurrCtx)
       EgtDeleteContext(nCtx)

OptionPanel/MachiningTab/MachiningTabVM.vb

@@ -224,13 +224,17 @@ Public Class MachiningTabVM
    End Property
 
    Public Sub Prev(ByVal param As Object)
+      Dim bOk As Boolean = True
       ' Dichiaro solo visualizzazione
       m_bIsShow = True
       If m_MachiningMode = MachiningModeOpt.SPLIT Then
          OmagOFFICEMap.refSplitModeVM.ExitSplitRaw(False)
       Else
-         OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
+         ' verifico collisione dei pezzi in fase di scarico
+         bOk = OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
       End If
+      ' se trovata interferenza tra grezzi (dopo movimentazione) esco
+      If Not bOk Then Return
       ' Torno alla fase precedente
       EgtSetCurrPhase(EgtGetCurrPhase() - 1)
       ' Si va sempre in Split
@@ -255,19 +259,22 @@ Public Class MachiningTabVM
    End Property
 
    Public Sub NextCmd(ByVal param As Object)
+      Dim bOk As Boolean = True
       If m_MachiningMode = MachiningModeOpt.SPLIT Then
          OmagOFFICEMap.refSplitModeVM.ExitSplitRaw(False)
          MachiningMode = MachiningModeOpt.MOVERAWPART
          AutoVisibility = Visibility.Hidden
-         OmagOFFICEMap.refMoveRawModeVM.InitMoveRaw()
+         bOk = OmagOFFICEMap.refMoveRawModeVM.InitMoveRaw()
       Else
-         OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
+         ' se verificata una interferenza allora esco
+         bOk = OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
+         If Not bOk Then Return
          MachiningMode = MachiningModeOpt.SPLIT
          AutoVisibility = Visibility.Visible
          OmagOFFICEMap.refSplitModeVM.InitSplitRaw()
       End If
-      ' Aggiorno possibilità di uscire
-      ManageExit()
+      ' Se non ci sono interferenze tra i grezzi -> aggiorno possibilità di uscire
+      If bOk Then ManageExit()
    End Sub
 
 #End Region ' NextCommand

OptionPanel/MachiningTab/MoveRawModeVM.vb

@@ -17,6 +17,7 @@ Public Class MoveRawModeVM
    Private m_bRemovedRaw As Boolean = False                 ' flag per rimozione manuale pezzi
    Private m_RawMoveDataList As New List(Of RawMoveData)    ' dati di movimento
    Private m_bRawWithCups As Boolean = False                ' flag per pezzo corrente con ventose
+   Private m_CurrRawOnVacuum As Integer = GDB_ID.NULL       ' identificativo pezzo correntemente attaccato alle ventose
 
    Private m_dMoveStep As Double
    Public Property MoveStep As String
@@ -108,6 +109,17 @@ Public Class MoveRawModeVM
 #Region "METHODS"
 
    Friend Function InitMoveRaw() As Boolean
+      '' verifico che il pezzo sia depositabile
+      'If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+      '   ' mantengo la selezione del pezzo
+      '   EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+      '   OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+      '   EgtDraw()
+      '   ' non cambio pagina
+      '   Return False
+      'End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Recupero i tagli allungati prima definiti
@@ -158,14 +170,14 @@ Public Class MoveRawModeVM
                ' Distanza iniziale
                m_dCurrDist = 0
             End If
-         ' Non dovrebbe mai accadere, ma inizializzo con default
+            ' Non dovrebbe mai accadere, ma inizializzo con default
          Else
             m_vtDir = Vector3d.Y_AX()
             m_ptMid = Point3d.ORIG()
             m_dOrigDist = 0
             m_dCurrDist = 0
          End If
-      ' Altrimenti movimento con ventose
+         ' Altrimenti movimento con ventose
       Else
          m_bRemovedRaw = False
          m_bRawWithCups = False
@@ -182,7 +194,7 @@ Public Class MoveRawModeVM
       If OmagOFFICEMap.refMachiningTabVM.ByHand Then
          LRArrowVisibility = Visibility.Hidden
          RotationVisibility = Visibility.Hidden
-      ' Altrimenti per movimento con ventose
+         ' Altrimenti per movimento con ventose
       Else
          LRArrowVisibility = Visibility.Visible
          RotationVisibility = If(CurrentMachine.bRawSplMovRotate, Visibility.Visible, Visibility.Hidden)
@@ -195,6 +207,17 @@ Public Class MoveRawModeVM
    End Function
 
    Friend Function ExitMoveRaw() As Boolean
+      ' verifico che il pezzo sia depositabile
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+         EgtDraw()
+         ' non cambio pagina
+         Return False
+      End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Se movimento con ventose
@@ -351,6 +374,39 @@ Public Class MoveRawModeVM
       Return bOk
    End Function
 
+   ' Veririfica che il grezzo non entri in colliosione con altri pezzi 
+   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer) As Boolean
+      If nIdOnVacumm = GDB_ID.NULL Then Return False
+      ' Creo gruppo temporaneo in cui generare le superfici per la veririfica di collisione
+      Dim m_nTempId As Integer = EgtCreateGroup(GDB_ID.ROOT)
+      If m_nTempId = GDB_ID.NULL Then Return False
+      EgtSetName(m_nTempId, "RawTemp")
+      Dim nIdActualRawOutLine As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawOutline")
+      Dim ActualRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdActualRawOutLine)
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      Dim nRawGroupId = EgtGetParent(EgtGetFirstRawPart())
+      Dim nIdRaw As Integer = EgtGetFirstRawPart()
+      ' ciclo su tutti i grezzi per veririficare eventuali collisioni
+      While nIdRaw <> GDB_ID.NULL
+         ' verifico la fase del grezzo
+         If EgtVerifyRawPartCurrPhase(nIdRaw) And nIdOnVacumm <> nIdRaw Then
+            ' recupero il contorno del pezzo
+            Dim nIdRawOutLine As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawOutline")
+            Dim nIdRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdRawOutLine)
+            If EgtSurfFrIntersect(nIdRawFlatRegion, ActualRawFlatRegion) Then
+               If EgtExistsObj(nIdRawFlatRegion) Then
+                  EgtErase(m_nTempId)
+                  ' esiste una intersezione delle superfici
+                  Return True
+               End If
+            End If
+         End If
+         nIdRaw = EgtGetNextRawPart(nIdRaw)
+      End While
+      EgtErase(m_nTempId)
+      Return False
+   End Function
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -685,12 +741,34 @@ Public Class MoveRawModeVM
          ' Se trovato il grezzo
          If nParentId = nRawGroupId Then
             Dim nStat As Integer = GDB_ST.ON_
+            ' Se il pezzo corrente è selezionato allora lo disattivo -> deposito del pezzo
             EgtGetStatus(nId, nStat)
             If nStat = GDB_ST.SEL Then
                EgtSetStatus(nId, GDB_ST.ON_)
-               ' Se con ventose, le nascondo
-               If Not OmagOFFICEMap.refMachiningTabVM.ByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola
+               If VerifyCollisionWithOtherRawPart(nId) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(nId, GDB_ST.SEL)
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+               Else
+                  ' Se con ventose, le nascondo
+                  If Not OmagOFFICEMap.refMachiningTabVM.ByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               End If
+
             Else
+
+               ' verifico che il pezzo precedente possa essere depositato correttamente
+               If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+                  EgtDraw()
+                  ' esco dal ciclo, prima devo depositare correttamente il pezzo
+                  Exit While
+               End If
+               ' salvo l'indice del pezzo correntemente attaccato alle ventose
+               m_CurrRawOnVacuum = nId
+
                EgtDeselectAll()
                EgtSetStatus(nId, GDB_ST.SEL)
                ' Se con ventose, le posiziono sul grezzo
@@ -736,6 +814,15 @@ Public Class MoveRawModeVM
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+
+      ' clicco su un oggetto che non è un grezzo -> verifico che il pezzo precedente possa essere depositato correttamente
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+         EgtDraw()
+      End If
+
    End Sub
 
 #End Region    ' EVENTS

OptionPanel/MachiningTab/SplitModeVM.vb

@@ -595,8 +595,32 @@ Public Class SplitModeVM
          ' assegno numerazione
          NumberDirectionMachining(nI)
       Next
+      ' -------------------- Recupero le lavorazioni indicate come attive --------------------
+      Dim ActiveMachLst As New List(Of Integer)
+      For Each ItemSplitMach As NameIdLsBxItem In m_ItemList
+         ActiveMachLst.Add(ItemSplitMach.Ind)
+      Next
+      ' -------------------- Recupero le lavorazioni indicate come attive --------------------
       ' Preparo la lista degli Item
       ShowMachiningList()
+      ' -------------------- Riattivo le lavorazioni precedenti --------------------
+      For Each Item As SplitMach In m_MachiningList
+         EgtSetInfo(Item.m_nId, INFO_MCH_USER_OFF, True)
+      Next
+
+      For nIndex As Integer = 0 To ActiveMachLst.Count - 1
+         For Each ItemSplitMach As NameIdLsBxItem In m_ItemList
+            If ItemSplitMach.Ind = ActiveMachLst(nIndex) Then
+               EgtRemoveInfo(m_MachiningList(ItemSplitMach.Ind).m_nId, INFO_MCH_USER_OFF)
+               m_MachiningList(ItemSplitMach.Ind).m_bEnabled = True
+               ItemSplitMach.bIsActive = True
+               ' sistemo colore
+               ColorMachining(m_MachiningList(ItemSplitMach.Ind))
+               Exit For
+            End If
+         Next
+      Next
+      ' -------------------- Riattivo le lavorazioni precedenti --------------------
       ' Aggiorno visualizzazione
       EgtDraw()
       ' Aggiono abilitazione bottoni
@@ -797,6 +821,15 @@ Public Class SplitModeVM
       vtXY.Normalize()
       Dim ptCen As Point3d = Point3d.Media(ptMin, ptMax) + vtXY * If(Not b2ndLav, -0.8, 0.8) * dHtxt
       ptCen.z = ptMax.z + 1
+
+      ' ricavo la posizione del punto (se waterjet separata)
+      If m_MachiningList(nI).m_nType = MCH_OY.WATERJETTING Or m_MachiningList(nI).m_nType = MCH_OY.MILLING Then
+         Dim ptMid As Point3d
+         Dim vVers As Vector3d
+         MidPointOfCurve(m_MachiningList(nI).m_nId, ptMid, vVers)
+         ptCen = ptMid ' + vVers * If(Not b2ndLav, -0.8, 0.8) * dHtxt
+      End If
+
       If bNumber Then
          Dim nNbrId As Integer = EgtCreateTextAdv(m_nNbrGrpId, ptCen, 0, (nI + 1).ToString(), "",
                                                    300, False, dHtxt, dRat, 0, INS_POS.MC)
@@ -851,6 +884,36 @@ Public Class SplitModeVM
       Return EgtGetBBoxGlob(nPvId, GDB_BB.STANDARD, ptMin, ptMax)
    End Function
 
+   Private Function MidPointOfCurve(nOperId As Integer, ByRef ptMid As Point3d, ByRef vVers As Vector3d) As Boolean
+      Dim nPvId As Integer = GDB_ID.NULL
+      EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+      ' creo un layer ausiliario per creare la curva composita
+      Dim AuxLayer As Integer = EgtCreateGroup(nPvId)
+      ' imposto la lavorazione corrente
+      EgtSetCurrMachining(nOperId)
+      ' recupero tutte le entità della lavorazione corrente
+      Dim nInd As Integer = 0
+      Dim nIdCurr As Integer
+      Dim nSub As Integer
+      Dim CurveCompoList As New List(Of Integer)
+      While EgtGetMachiningGeometry(nInd, nIdCurr, nSub)
+         CurveCompoList.Add(nIdCurr)
+         nInd += 1
+      End While
+      Dim PtNearStart As Point3d
+      Dim nIdCutPath As Integer = EgtCreateCurveCompoByChain(AuxLayer, CurveCompoList.ToArray, PtNearStart, False)
+      Dim dLength As Double = 0
+      EgtCurveLength(nIdCutPath, dLength)
+      Dim dParam As Double = 0
+      EgtCurveParamAtLength(nIdCutPath, dLength / 2, dParam)
+      EgtAtParamPoint(nIdCutPath, dParam, GDB_RT.GLOB, ptMid)
+      EgtAtParamVector(nIdCutPath, dParam, -1, vVers)
+      vVers.Normalize()
+      vVers.Rotate(Vector3d.Z_AX, 90)
+      EgtErase(AuxLayer)
+      Return True
+   End Function
+
    Private Function AddMachiningDirection(ptStart As Point3d, vtDir As Vector3d, dLen As Double, bTwin As Boolean) As Integer
       Dim dArrX As Double = dLen * Math.Cos(30 * Math.PI / 180)
       Dim dArrY As Double = dLen * Math.Sin(30 * Math.PI / 180)

OptionPanel/NestingTab/NestingTabVM.vb

@@ -190,13 +190,15 @@ Public Class NestingTabVM
 
    Public ReadOnly Property SplitCurvWJMsg As String
       Get
-         Return "Split"
+         '91133=Separa
+         Return EgtMsg(91133)
       End Get
    End Property
 
    Public ReadOnly Property StartCurvWJMsg As String
       Get
-         Return "Start"
+         '91132=Start
+         Return EgtMsg(91132)
       End Get
    End Property
 
@@ -603,7 +605,7 @@ Public Class NestingTabVM
                End If
                ' recupero il gruppo della lavorazione associata
                Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
-               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, "PV")
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
                ' se non esiste un gruppo di lavorazione associato allora esco
                If nIdPV = GDB_ID.NULL Then
                   'm_CurrProjPage.ClearMessage()
@@ -915,26 +917,27 @@ Public Class NestingTabVM
                End If
                ' recupero il gruppo della lavorazione associata
                Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
-               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, "PV")
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
                ' VERIFICA: recupero l'elenco delle Preview di Tipo WaterJet associate a questo Part
                Dim ListGroup As List(Of Integer) = ResearchGropuWJ(nIdParent, nIdPV)
+               ' VERIFICA: se esistono delle lavorazioni associate al percorso OutLoop di tipo Saw allora non procedo
+               Dim ListGroupSaw As List(Of Integer) = ResearchGropuSaw(nIdParent, nIdPV)
                ' se non esiste almeno 1 Preview di tipo WaterJet
-               If ListGroup.Count > 0 Then
+               If ListGroup.Count > 0 And ListGroupSaw.Count = 0 Then
                   m_nIdSelectedSideWJ = nIdMy
                   Dim nValInfo As Integer = 1
-                  If EgtGetInfo(nIdMy, "JoinEntity", nValInfo) Then
+                  Dim nNewValInfo As Integer = nValInfo
+                  If EgtGetInfo(nIdMy, INFO_JOINTENTITY, nValInfo) Then
                      If nValInfo = 1 Then
-                        ' separo il taglio
-                        EgtSetInfo(nIdMy, "JoinEntity", 0)
+                        nNewValInfo = 0
                      Else
-                        ' unisco il taglio
-                        EgtSetInfo(nIdMy, "JoinEntity", 1)
+                        nNewValInfo = 1
                      End If
                   Else
                      ' se manca l'info allora il taglio sValInfo = "1" quindi separo il taglio
-                     EgtSetInfo(nIdMy, "JoinEntity", 0)
+                     nNewValInfo = 0
                   End If
-
+                  EgtSetInfo(nIdMy, INFO_JOINTENTITY, nNewValInfo)
                   ' Ricalcolo tutte le lavorazioni
                   Dim nWarn As Integer = 0
                   ResetAllMachinings(nWarn)
@@ -942,6 +945,12 @@ Public Class NestingTabVM
                   ListGroup = ResearchGropuWJ(nIdParent, nIdPV)
                   Dim nIdWJ As Integer = GetPVIdFromIdSide(ListGroup, nIdMy)
                   GetCurrentPVFromIdSide(ListGroup, nIdMy, nIdWJ, nIdParent)
+                  ' assegno un identificativo grafico per inidcare che è un taglio separato
+                  If nNewValInfo = 0 Then
+                     AssignFlagOnGraphic(nIdMy, nIdParentPart)
+                  Else
+                     EraseFlagOnGraphic(nIdMy, nIdParentPart)
+                  End If
                   ' salvo il valore del PreView evidenziato
                   m_nIdSelectedWaterJet = nIdWJ
                   EgtSetMark(nIdWJ)
@@ -976,6 +985,25 @@ Public Class NestingTabVM
       Return ListOfGroupPV
    End Function
 
+   ' restituisce l'elenco dei Gruppi Saw associati al contorno indicato
+   Public Function ResearchGropuSaw(nIdOutLoop As Integer, nIdPV As Integer) As List(Of Integer)
+      Dim ListOfGroupPV As New List(Of Integer)
+      Dim nIdGroup As Integer = GDB_ID.NULL
+      Dim nIdMy As Integer = GDB_ID.NULL
+      ' recupero il primo lato dall'elenco dei lati della figura
+      nIdMy = EgtGetFirstInGroup(nIdOutLoop)
+      ' altrimenti cerco all'interno del layer OutLoop per ogni lato la lavorazione associata
+      While nIdMy <> GDB_ID.NULL
+         ' verifico se esiste una Preview associata al lato
+         nIdGroup = EgtGetFirstNameInGroup(nIdPV, "Saw" & nIdMy.ToString)
+         If nIdGroup <> GDB_ID.NULL Then
+            ListOfGroupPV.Add(nIdGroup)
+         End If
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return ListOfGroupPV
+   End Function
+
    Public Function GetPVIdFromIdSide(ListGroup As List(Of Integer), nIdMy As Integer) As Integer
       Dim IdWaterjetPV As Integer = GDB_ID.NULL
       For Each nIdItem As Integer In ListGroup
@@ -1030,7 +1058,7 @@ Public Class NestingTabVM
          ' se arrivato al primo valore allora continuo la ricerca dall'ultimo
          If nIdWJPrev = GDB_ID.NULL Then nIdWJPrev = EgtGetLastInGroup(EgtGetParent(nIdMy))
          nCount += 1
-         EgtGetInfo(nIdWJPrev, "JoinEntity", nValInfo)
+         EgtGetInfo(nIdWJPrev, INFO_JOINTENTITY, nValInfo)
          If nValInfo = 1 Then
             nIdWj = GetPVIdFromIdSide(ListGroup, nIdWJPrev)
             If nIdWj <> GDB_ID.NULL Then Return
@@ -1054,6 +1082,62 @@ Public Class NestingTabVM
       EgtDraw()
    End Sub
 
+   ' ricevo l'ID del percorso di lavorazione WJ al quale associo una etichetta grafica con scritto "S"
+   Private Sub AssignFlagOnGraphic(nIdMy As Integer, IdParentPart As Integer)
+      ' cerco se esiste già un layer nominato "AUX_SPLIT_WJ", altrimenti lo creo
+      Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(IdParentPart, INFO_AUX_SPLIT_WJ)
+      If IdAuxLayer = GDB_ID.NULL Then
+         IdAuxLayer = EgtCreateGroup(IdParentPart)
+         EgtSetName(IdAuxLayer, INFO_AUX_SPLIT_WJ)
+      End If
+      ' recupero il punto medio del segmento selezionato
+      Dim MidPoint As Point3d
+      EgtMidPoint(nIdMy, GDB_RT.GLOB, MidPoint)
+      'Dim nIdTextFlag As Integer = EgtCreateText(IdAuxLayer, MidPoint, "*", 20, GDB_RT.GLOB)
+      Dim nIdTextFlag As Integer = GetCreateFlagText(nIdMy, IdAuxLayer)
+      EgtSetColor(nIdTextFlag, New Color3d(255, 0, 0))
+      EgtSetName(nIdTextFlag, "RefSide_" & nIdMy.ToString)
+   End Sub
+
+   Private Function GetCreateFlagText(nId As Integer, nIdLayer As Integer, Optional sText As String = "*") As Integer
+      ' recupero il punto medio
+      Dim MidPoint As Point3d
+      EgtMidPoint(nId, GDB_RT.GLOB, MidPoint)
+      ' recupero la direzione del vettore nel punto medio
+      Dim vVers As Vector3d
+      EgtMidVector(nId, GDB_RT.GLOB, vVers)
+      vVers.Normalize()
+      vVers.Rotate(Vector3d.Z_AX, 90)
+      ' Ingombro complessivo della lavorazione
+      Dim ptMin, ptMax As Point3d
+      EgtStartPoint(nId, GDB_RT.GLOB, ptMin)
+      EgtEndPoint(nId, GDB_RT.GLOB, ptMax)
+      ' Metto il numero nel centro
+      Dim dRadXY = Point3d.DistXY(ptMin, ptMax)
+      Dim dHtxt As Double = 50
+      Dim dRat As Double = 0.75
+      If dRadXY < 200 Then
+         dHtxt = 40
+         dRat = 0.6
+      ElseIf dRadXY < 25 Then
+         dHtxt = 25
+         dRat = 0.5
+      End If
+      ' determino la posizione del flag
+      MidPoint.x += vVers.x * dHtxt / 2
+      MidPoint.y += vVers.y * dHtxt / 2
+
+      Return EgtCreateTextAdv(nIdLayer, MidPoint, 0, sText, "", 300, False, dHtxt, dRat, 0, INS_POS.MC, GDB_RT.GLOB)
+   End Function
+
+   Private Sub EraseFlagOnGraphic(nIdMy As Integer, IdParentPart As Integer)
+      ' cerco se esiste già un layer nominato "AUX_SPLIT_WJ", altrimenti lo creo
+      Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(IdParentPart, INFO_AUX_SPLIT_WJ)
+      If IdAuxLayer = GDB_ID.NULL Then Return
+      Dim nIdTextFlag As Integer = EgtGetFirstNameInGroup(IdAuxLayer, "RefSide_" & nIdMy.ToString)
+      EgtErase(nIdTextFlag)
+   End Sub
+
 #End Region    ' WaterJet Section and StartPoint
 
    Private m_bSplitCurvWJ As Boolean
@@ -1127,21 +1211,24 @@ Public Class NestingTabVM
          ' recupero il nome del Layer
          EgtGetName(nIdParent, sLayer)
          ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
-         If sLayer = NAME_OUTLOOP Then
+         If sLayer = NAME_OUTLOOP Or sLayer = NAME_INLOOP Then
             If EgtGetType(nIdMy) = GDB_TY.CRV_ARC OrElse EgtGetType(nIdMy) = GDB_TY.CRV_COMPO OrElse EgtGetType(nIdMy) = GDB_TY.CRV_LINE Then
                ' verifico che il contorno sia chiuso, altrimenti esco
                If Not VerifyOutLoopIsClosed(nIdParent) Then
-                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Il contorno non è chiuso (0)", MSG_TYPE.WARNING)
+                  '91131=Il contorno non è chiuso
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(91131), MSG_TYPE.WARNING)
                   Exit While
                End If
                ' recupero il gruppo della lavorazione associata
                Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
-               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, "PV")
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
                ' VERIFICA: recupero l'elenco delle Preview di Tipo WaterJet_n_S associate a questo Part
                Dim ListGroup As List(Of Integer) = ResearchGropuWJ(nIdParent, nIdPV)
+               ' VERIFICA: se esistono delle lavorazioni associate al percorso OutLoop di tipo Saw allora non procedo
+               Dim ListGroupSaw As List(Of Integer) = ResearchGropuSaw(nIdParent, nIdPV)
                ' se non esiste almeno 1 Preview di tipo WaterJet
-               If ListGroup.Count <> EgtGetGroupObjs(nIdParent) Then
-                  EgtSetInfo(nIdParent, "Start", ptStartCurv)
+               If ListGroup.Count = 1 And ListGroupSaw.Count = 0 Then
+                  EgtSetInfo(nIdParent, INFO_START, ptStartCurv)
                   ' Ricalcolo tutte le lavorazioni
                   Dim nWarn As Integer = 0
                   ResetAllMachinings(nWarn)
@@ -1154,18 +1241,19 @@ Public Class NestingTabVM
                   EgtDraw()
                   Exit While
                Else
-                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Il contorno non è chiuso (1)", MSG_TYPE.WARNING)
+                  '91131=Il contorno non è chiuso
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(91131), MSG_TYPE.WARNING)
                   Exit While
                End If
 
             End If
-            End If
+         End If
          nIdMy = EgtGetNextObjInSelWin()
       End While
       Return
    End Sub
 
-#End Region
+#End Region    ' Water Start Point
 
    Private m_bStartCurvWJ As Boolean
    Public Property bStartCurvWJ As Boolean

OptionPanel/RawPartTab/RawPartTabVM.vb

@@ -1,4 +1,6 @@
-Imports System.IO
+Imports System.Threading
+Imports System.Windows.Threading
+Imports System.IO
 Imports System.Collections.ObjectModel
 Imports EgtWPFLib5
 Imports EgtPHOTOLib
@@ -7,6 +9,10 @@ Imports EgtUILib
 Public Class RawPartTabVM
    Inherits VMBase
 
+   ' Timer
+   Private m_TimerIsBusy As Boolean = False
+   Private m_RefreshTimer As New DispatcherTimer
+
    Friend OmagPhoto As OmagPhotoV
 
    Private m_OmagPhotoVM As OmagPhotoVM
@@ -2034,11 +2040,17 @@ Public Class RawPartTabVM
          ' inserisco in elenco solo i materiali della macchina corrente
          AddHandler PhotoMap.refOptionPanelVM.SlabIsSelectedOFFICE, AddressOf OmagOFFICEMap.refRawPartTabVM.ClosePhotoWnd
 
-         ' Dim OmagPhotoWnd As New OmagPhotoV(Application.Current.MainWindow(), New OmagPhotoVM)
-         'OmagPhotoWnd.ShowDialog()
+         ' lancio il timer di aggiornamento dell'interfaccia, per la gestione di due OmagPHOTO che accedono allo stesso SQL
+         AddHandler m_RefreshTimer.Tick, AddressOf RefreshTimer_Tick
+         m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(2000)
+         m_RefreshTimer.Start()
+
+         ' apro la finestra per accedere al DB delle lastre
          Me.OmagPhoto = New OmagPhotoV
          OmagPhoto.ShowDialog()
 
+         m_RefreshTimer.Stop()
+
          EgtSetCurrentContext(EgtPHOTOLib.MainData.PreviousContext)
          EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
 
@@ -2156,6 +2168,17 @@ Public Class RawPartTabVM
       EgtDraw()
    End Sub
 
+   ' per la gestione di due OmagPHOTO che accedono allo stesso SQL
+   Private Sub RefreshTimer_Tick()
+      If Not m_TimerIsBusy And PhotoMap.refProjectVM.SelProjectMode = ProjectSlabVM.ProjectModeOpt.LIST Then
+         m_TimerIsBusy = True
+         m_RefreshTimer.Stop()
+         EgtPHOTOLib.PhotoMap.refListPageVM.RefreshLisPage()
+         m_TimerIsBusy = False
+         m_RefreshTimer.Start()
+      End If
+   End Sub
+
 #End Region ' PhotoCommand
 
 #Region "ConfirmPhotoCommand"

SideEntityControl/SideEntityControlV.xaml

@@ -172,6 +172,19 @@
                                 Grid.Column="1"/>
       </Grid>
 
-   </Grid>
+      <Grid Visibility="{Binding Parameter5_Visibility}"
+          Grid.Row="5"
+          Margin="0,0,0,5">
+          <Grid.ColumnDefinitions>
+              <ColumnDefinition Width="1.8*"/>
+              <ColumnDefinition Width="1.2*"/>
+          </Grid.ColumnDefinitions>
+
+          <TextBlock Text="{Binding Parameter5Msg}" Grid.Row="2"/>
+          <CheckBox IsChecked="{Binding Parameter5ChBx}" HorizontalAlignment="Center"
+                              Grid.Column="1"/>
+      </Grid>
+
+    </Grid>
    
 </UserControl>

SideEntityControl/SideEntityControlVM.vb

@@ -143,6 +143,7 @@ Public Class SideEntityControlVM
             StringToLen(value, m_Parameter1)
             ' Recupero il valore
             StringToLen(value, m_dDripOffset)
+            StringToLen(value, m_dOffsetFiloTop)
             ' Creo le geometrie dei gocciolatoi
             RefreshSideAngleText()
             ' Aggiorno i dati delle alette
@@ -203,6 +204,7 @@ Public Class SideEntityControlVM
             RefreshSideAngleText()
          Else
             m_dDripOffset2 = m_Parameter2
+            m_dDepthFiloTop = m_Parameter2
             ' Creo le geometrie dei gocciolatoi
             RefreshSideAngleText()
          End If
@@ -347,11 +349,16 @@ Public Class SideEntityControlVM
          Return LenToString(m_Parameter4, 2)
       End Get
       Set(value As String)
-         If m_Mode <> ModeOpt.SIDEANGLE Then
+         If m_Mode = ModeOpt.DRIP Then
             StringToLen(value, m_Parameter4)
             m_dDripShort = m_Parameter4
             ' Creo le geometrie dei gocciolatoi
             RefreshSideAngleText()
+         ElseIf m_Mode = ModeOpt.ENGRAVE Then
+            StringToLen(value, m_Parameter4)
+            m_dEngraveDepth2 = m_Parameter4
+            ' Creo le geometrie dei gocciolatoi
+            RefreshSideAngleText()
          End If
       End Set
    End Property
@@ -362,6 +369,41 @@ Public Class SideEntityControlVM
 
 #End Region    'Parameter 4
 
+#Region "Parameter 5"
+
+   Private m_Parameter5_Visibility As Visibility
+   Public Property Parameter5_Visibility As Visibility
+      Get
+         Return m_Parameter5_Visibility
+      End Get
+      Set(value As Visibility)
+         m_Parameter5_Visibility = value
+         NotifyPropertyChanged(NameOf(Parameter5_Visibility))
+      End Set
+   End Property
+
+   Private m_Parameter5ChBx As Boolean
+   Public Property Parameter5ChBx As Boolean
+      Get
+         Return m_Parameter5ChBx
+      End Get
+      Set(value As Boolean)
+         If m_Mode = ModeOpt.FILOTOP Then
+            m_bCornerRadius = value
+            ' Creo le geometrie dei gocciolatoi
+            RefreshSideAngleText()
+            m_Parameter5ChBx = m_bCornerRadius
+         End If
+         NotifyPropertyChanged("Parameter5ChBx")
+      End Set
+   End Property
+   Private Sub SetParameter5(value As Boolean)
+      m_Parameter5ChBx = value
+      NotifyPropertyChanged("Parameter5ChBx")
+   End Sub
+
+#End Region    'Parameter 5
+
    Private m_dSideAngle As Double = 0
 
    Private m_HeightA As Double = 0
@@ -369,13 +411,16 @@ Public Class SideEntityControlVM
    Private m_DeltaAngF As Double = 0
    Private m_DeltaAngA As Double = 0
 
+   Private m_SelList As New List(Of Integer)
    Private m_dOffsetFiloTop As Double = 5
    Private m_dDepthFiloTop As Double = 5
+   Private m_bCornerRadius As Boolean = False
 
    Private m_dDripOffset As Double = 10
    Private m_dDripOffset2 As Double = 0
    Private m_nEngrNbr2 As Integer = 1
    Private m_dDripDepth As Double = 10
+   Private m_dEngraveDepth2 As Double = 5
    Private m_dDripShort As Double = 0
 
    Private m_CallingWndScene As Scene
@@ -415,16 +460,26 @@ Public Class SideEntityControlVM
       End Set
    End Property
 
-   Private m_Parameter4Msg As String = EgtMsg(MSG_IMPORTPAGEUC + 12)
+   Private m_Parameter4Msg As String = EgtMsg(MSG_IMPORTPAGEUC + 11) & "2"
    Public Property Parameter4Msg As String
       Get
-         Return m_Parameter4Msg      ' Accorciamento
+         Return m_Parameter4Msg      ' Affondamento2
       End Get
       Set(value As String)
          m_Parameter4Msg = value
       End Set
    End Property
 
+   Private m_Parameter5Msg As String = "RoundOff"
+   Public Property Parameter5Msg As String
+      Get
+         Return m_Parameter5Msg      ' Arrotonda
+      End Get
+      Set(value As String)
+         m_Parameter5Msg = value
+      End Set
+   End Property
+
 #End Region    ' Messages
 
 #Region "CONSTRUCTOR"
@@ -470,21 +525,26 @@ Public Class SideEntityControlVM
          Parameter2_Visibility = Visibility.Visible
          Parameter2ab_Visibility = Visibility.Hidden
          Parameter4_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Hidden
       ElseIf m_Mode = ModeOpt.FILOTOP Then
          Parameter23_Visibility = Windows.Visibility.Hidden
          Parameter2_Visibility = Visibility.Visible
          Parameter2ab_Visibility = Visibility.Hidden
+         Parameter4_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Visible
       ElseIf m_Mode = ModeOpt.ALZANDFRONT Then
          Parameter2_Visibility = Visibility.Hidden
          Parameter23_Visibility = Windows.Visibility.Visible
          Parameter2ab_Visibility = Visibility.Visible
          Parameter4_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Hidden
       Else
          ' Temporaneamente lo disabilito
          Parameter23_Visibility = Windows.Visibility.Visible
-         Parameter4_Visibility = Visibility.Collapsed
+         Parameter4_Visibility = Visibility.Visible
          Parameter2ab_Visibility = Visibility.Visible
          Parameter2_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Hidden
       End If
 
       '------------------ VALORI E TITOLI PARAMETRI 
@@ -497,12 +557,15 @@ Public Class SideEntityControlVM
 
       ElseIf m_Mode = ModeOpt.FILOTOP Then
          Parameter1Msg = EgtMsg(MSG_IMPORTPAGEUC + 10)      ' Offset
-         Dim x As String = EgtMsg(MSG_IMPORTPAGEUC + 11)
          Parameter2Msg = EgtMsg(MSG_IMPORTPAGEUC + 11)      ' Depth
+         Parameter5Msg = "Round Off"
          m_dOffsetFiloTop = GetMainPrivateProfileDouble(S_SIDES, K_FILOTOPOFFSET, 5)
          m_dDepthFiloTop = GetMainPrivateProfileDouble(S_SIDES, K_FILOTOPDEPTH, 5)
+         m_bCornerRadius = GetMainPrivateProfileInt(S_SIDES, K_FILOTOPROUNDOFF, 0) <> 0
          SetParameter1(m_dOffsetFiloTop)
          SetParameter2(m_dDepthFiloTop)
+         SetParameter5(m_bCornerRadius)
+         m_SelList.Clear()
 
       ElseIf m_Mode = ModeOpt.ENGRAVE Or m_Mode = ModeOpt.DRIP Then
          Parameter1Msg = EgtMsg(MSG_IMPORTPAGEUC + 10)      ' Offset
@@ -512,12 +575,13 @@ Public Class SideEntityControlVM
          m_nEngrNbr2 = GetMainPrivateProfileInt(S_SIDES, K_ENGRAVENUMBER2, 1)
          m_dDripDepth = GetMainPrivateProfileDouble(S_SIDES, K_DRIPDEPTH, 10)
          m_dDripShort = GetMainPrivateProfileDouble(S_SIDES, K_DRIPSHORT, 0)
+         m_dEngraveDepth2 = GetMainPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0)
          SetParameter1(m_dDripOffset)
          SetParameter2(m_dDripOffset2)
          SetParameter2a(m_nEngrNbr2)
          SetParameter2b(m_dDripOffset2)
          SetParameter3(m_dDripDepth)
-         SetParameter4(m_dDripShort)
+         SetParameter4(m_dEngraveDepth2)
 
       ElseIf m_Mode = ModeOpt.ALZANDFRONT Then
          ' definisco i nomi dei campi
@@ -536,6 +600,9 @@ Public Class SideEntityControlVM
          LoadCurrentCompo()
       End If
 
+      ' aggiorno i testi sui lati della figura
+      RefreshSideAngleText()
+
       ' Aggiorno visualizzazione
       If CallingWindow = CallingWindowOpt.COMPO Then
          EgtZoom(ZM.ALL)
@@ -609,7 +676,9 @@ Public Class SideEntityControlVM
          ' Creo le geometrie dei gocciolatoi
          CreateDripGeom(PartId)
       ElseIf m_Mode = ModeOpt.ENGRAVE Then
-         '--- ??? ---
+         ' --- ??? ---
+      ElseIf m_Mode = ModeOpt.FILOTOP Then
+         CreateFiloTopPreView(m_SelList, False)
       End If
       ' Aggiorno visualizzazione
       EgtDraw()
@@ -717,7 +786,7 @@ Public Class SideEntityControlVM
       End If
 
       ' Aggiorno interfaccia
-      If m_CallingWindow = CallingWindowOpt.DXFIMPORT Then
+      If m_CallingWindow = CallingWindowOpt.DXFIMPORT Or m_CallingWindow = CallingWindowOpt.COMPO Then
          If m_Mode = ModeOpt.SIDEANGLE Then
             For Each Entity In m_SideEntityList
                If DirectCast(Entity, SideAngleEntity).dSideAngle <> 0 Then
@@ -1101,6 +1170,9 @@ Public Class SideEntityControlVM
       Dim nCrvId = EgtGetFirstInGroup(DripLayer)
       While nCrvId <> GDB_ID.NULL
          EgtOffsetCurve(nCrvId, -m_dDripOffset, OFF_TYPE.EXTEND)
+         If m_Mode = ModeOpt.ENGRAVE Then
+            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+         End If
          nCrvId = EgtGetNext(nCrvId)
       End While
       ' Eventuali curve aggiuntive con offset2
@@ -1111,10 +1183,14 @@ Public Class SideEntityControlVM
             For i As Integer = 1 To m_nEngrNbr2
                Dim nNewId As Integer = EgtCopy(nCrvId, nCrvId, GDB_POS.AFTER)
                EgtOffsetCurve(nNewId, -i * m_dDripOffset2, OFF_TYPE.EXTEND)
+               If m_Mode = ModeOpt.ENGRAVE Then
+                  EgtSetInfo(nNewId, INFO_DEPTH, m_dEngraveDepth2)
+               End If
             Next
             nCrvId = nNextCrvId
          End While
       End If
+
       If m_Mode = ModeOpt.DRIP Then
          ' Esplodo nelle curve componenti
          nCrvId = EgtGetFirstInGroup(DripLayer)
@@ -1137,7 +1213,7 @@ Public Class SideEntityControlVM
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
             EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
-            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+            ' EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
             EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
             nCrvId = EgtGetNext(nCrvId)
          End While
@@ -1266,8 +1342,9 @@ Public Class SideEntityControlVM
       If m_Mode = ModeOpt.SIDEANGLE Then
          WriteMainPrivateProfileString(S_SIDES, K_SIDEANGLE, DoubleToString(m_Parameter1, 3))
       ElseIf m_Mode = ModeOpt.FILOTOP Then
-         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPOFFSET, DoubleToString(m_Parameter1, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPDEPTH, DoubleToString(m_Parameter2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPOFFSET, LenToString(m_Parameter1, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPDEPTH, LenToString(m_Parameter2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPROUNDOFF, If(m_Parameter5ChBx, "1", "0"))
          ' Aggiorno affondamento del profilo
          Dim nPartId As Integer = EgtGetFirstPart()
          While nPartId <> GDB_ID.NULL
@@ -1283,10 +1360,10 @@ Public Class SideEntityControlVM
             nPartId = EgtGetNextPart(nPartId)
          End While
       ElseIf m_Mode = ModeOpt.DRIP Then
-         WriteMainPrivateProfileString(S_SIDES, K_DRIPOFFSET, DoubleToString(m_dDripOffset, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_DRIPOFFSET2, DoubleToString(m_dDripOffset2, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_DRIPDEPTH, DoubleToString(m_dDripDepth, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_DRIPSHORT, DoubleToString(m_dDripShort, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_DRIPOFFSET, LenToString(m_dDripOffset, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_DRIPOFFSET2, LenToString(m_dDripOffset2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_DRIPDEPTH, LenToString(m_dDripDepth, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_DRIPSHORT, LenToString(m_dDripShort, 3))
          For Each objEntity In m_SideEntityList
             If TypeOf objEntity Is DripEntity Then
                Dim CurrEntity As DripEntity = DirectCast(objEntity, DripEntity)
@@ -1295,11 +1372,12 @@ Public Class SideEntityControlVM
             End If
          Next
       ElseIf m_Mode = ModeOpt.ENGRAVE Then
-         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEOFFSET, DoubleToString(m_dDripOffset, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, DoubleToString(m_dDripOffset2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEOFFSET, LenToString(m_dDripOffset, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, LenToString(m_dDripOffset2, 3))
          WriteMainPrivateProfileString(S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString)
-         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, DoubleToString(m_dDripDepth, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVESHORT, DoubleToString(m_dDripShort, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVESHORT, LenToString(m_dDripShort, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3))
          For Each objEntity In m_SideEntityList
             If TypeOf objEntity Is DripEntity Then
                Dim CurrEntity As DripEntity = DirectCast(objEntity, DripEntity)
@@ -1736,8 +1814,146 @@ Public Class SideEntityControlVM
       End If
    End Sub
 
+   ' ----------------------- FILO TOP -----------------------
+   Public Sub CreateFiloTopPreView(SelList As List(Of Integer), Optional bReadInfo As Boolean = True)
+      m_SelList = SelList
+      If m_SelList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            ' verifico che lemento corrente appartenga all'elenco degli elementi selezionati
+            Dim bIsSelected As Boolean = m_SelList.Find(Function(value As Integer)
+                                                           Return value = nLayId
+                                                        End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' verifico il Layer "FiloTop" sia associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer "FiloTop"
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' lo creo
+                  nLayFiloTop = EgtCreateGroup(nPartId)
+                  EgtSetName(nLayFiloTop, "FiloTop")
+                  EgtSetInfo(nLayFiloTop, "InLoopRef", nLayId)
+                  EgtSetInfo(nLayId, "FiloTopRef", nLayFiloTop)
+               End If
+
+               ' carico i dati del filo top selezionato
+               If bReadInfo Then
+                  EgtGetInfo(nLayFiloTop, INFO_OFFSET, m_dOffsetFiloTop)
+                  EgtGetInfo(nLayFiloTop, INFO_DEPTH, m_dDepthFiloTop)
+                  Dim nVal As Integer = If(m_bCornerRadius, 1, 0)
+                  EgtGetInfo(nLayFiloTop, INFO_ROUNDOFF, nVal)
+                  m_bCornerRadius = If(nVal = 1, True, False)
+                  SetParameter1(m_dOffsetFiloTop)
+                  SetParameter2(m_dDepthFiloTop)
+                  SetParameter5(m_bCornerRadius)
+               End If
+
+               ' procedo alla creazione della curva
+               Dim nIdCompoCurve As Integer = GDB_ID.NULL
+               ' cancello un eventuale curva composita creata in precedenza
+               nIdCompoCurve = EgtGetFirstNameInGroup(nLayFiloTop, "OffsetPreView")
+               If nIdCompoCurve <> GDB_ID.NULL Then
+                  EgtErase(nIdCompoCurve)
+               End If
+               Dim nCompoCurve As New List(Of Integer)
+               ' costruisco il percorso chiuso dati i lati di contorno 
+               Dim nLine As Integer = EgtGetFirstInGroup(nLayId)
+               While nLine <> GDB_ID.NULL
+                  nCompoCurve.Add(nLine)
+                  nLine = EgtGetNext(nLine)
+               End While
+               Dim PtNearStart As Point3d
+               Dim nInfoRoundOff As Integer = If(m_bCornerRadius, 1, 0)
+
+               nIdCompoCurve = EgtCreateCurveCompoByChain(nLayFiloTop, nCompoCurve.ToArray, PtNearStart, False)
+               EgtSetName(nIdCompoCurve, "OffsetPreView")
+
+               ' salvo i dati nel layer FiloTop
+               EgtSetInfo(nLayFiloTop, INFO_OFFSET, m_dOffsetFiloTop)
+               EgtSetInfo(nLayFiloTop, INFO_DEPTH, m_dDepthFiloTop)
+               EgtSetInfo(nLayFiloTop, INFO_ROUNDOFF, nInfoRoundOff)
+
+               Dim bOk As Boolean = False
+               ' leggo che tipo di offset applicare (Round, Extend)
+               If nInfoRoundOff <> 1 Then
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dOffsetFiloTop, OFF_TYPE.EXTEND)
+               Else
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dOffsetFiloTop, OFF_TYPE.FILLET)
+               End If
+
+               ' se la generazione della curva non va a buon fine
+               If Not bOk Then
+                  EgtErase(nLayFiloTop)
+                  EgtRemoveInfo(nLayId, "FiloTopRef")
+                  EgtOutLog("Error in generation OffsetPreView in TopEgde ")
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+   ' riceve la lista dei LayerFiloTop che devono essere eliminati
+   Public Sub EraseFiloTopPreview(EraseList As List(Of Integer))
+      Dim m_EraseList As List(Of Integer) = EraseList
+      If m_EraseList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            Dim bIsSelected As Boolean = m_EraseList.Find(Function(value As Integer)
+                                                             Return value = nLayId
+                                                          End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' cerco il Layer associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' esco 
+                  Return
+               Else
+                  ' lo elimino
+                  EgtErase(nLayFiloTop)
+                  EraseList.Remove(nLayId)
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
 #End Region    ' METHODS
 
+
+
 End Class
 
 Public MustInherit Class SideEntity

Utility/OmagOFFICEMap.vb

@@ -120,7 +120,6 @@ Module OmagOFFICEMap
       End Get
    End Property
 
-   
    'Public ReadOnly Property refProjectVM As ProjectLibVM
    '   Get
    '      Return PhotoMap.refProjectVM