Inserimento SpotReg nel grezzo

(cherry picked from commit c01972f99e)

Constants/ConstIni.vb

@@ -104,6 +104,7 @@ Module ConstIni
    Public Const K_ENGRAVENUMBER2 As String = "EngraveNumber2"
    Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
    Public Const K_ENGRAVESHORT As String = "EngraveShort"
+   Public Const K_ENGRAVEANGLE As String = "EngraveAngle"
    Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
    Public Const K_DRIPOFFSET As String = "DripOffset"
    Public Const K_DRIPOFFSET2 As String = "DripOffset2"
@@ -125,6 +126,7 @@ Module ConstIni
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
    Public Const K_DRAGRECTANGLE As String = "DragRectangle"
+   Public Const K_STARTENDMODIFYONINTCORNER As String = "StartEndModifyOnIntCorner"
 
    Public Const S_SPLIT As String = "Split"
    Public Const K_MOVE_LEV As String = "MoveLevel"

CurrMachWindow/CurrMachWindowVM.vb

@@ -29,9 +29,17 @@ Public Class CurrMachWindowVM
             m_SelCurrSawing = value
          End If
          CurrentMachine.sCurrSawing = m_SelCurrSawing
+         ' salvo la lvorazione corrente
+         WritePrivateProfileString(S_MACH_MACH, K_CURRSAWING_OFFICE, m_SelCurrSawing, sMachIniFile)
       End Set
    End Property
 
+   Public Sub SetCurrSawing(sCurrOfficeSawing As String)
+      m_SelCurrSawing = sCurrOfficeSawing
+      CurrentMachine.sCurrSawing = m_SelCurrSawing
+      NotifyPropertyChanged("SelCurrSawing")
+   End Sub
+
    Public ReadOnly Property CurrSawing_Visibility As Visibility
       Get
          If EgtGetHeadId("H1") = GDB_ID.NULL Then
@@ -149,10 +157,18 @@ Public Class CurrMachWindowVM
          If value <> m_SelCurrDrilling Then
             m_SelCurrDrilling = value
             CurrentMachine.sCurrDrilling = m_SelCurrDrilling
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRDRILLING_OFFICE, m_SelCurrDrilling, sMachIniFile)
          End If
       End Set
    End Property
 
+   Public Sub SetCurrDrilling(sCurrOfficeDrilling As String)
+      m_SelCurrDrilling = sCurrOfficeDrilling
+      CurrentMachine.sCurrDrilling = m_SelCurrDrilling
+      NotifyPropertyChanged("SelCurrDrilling")
+   End Sub
+
    Private m_CurrDrilling_Visibility As Visibility
    Public Property CurrDrilling_Visibility As Visibility
       Get
@@ -187,10 +203,18 @@ Public Class CurrMachWindowVM
          If value <> m_SelCurrMilling Then
             m_SelCurrMilling = value
             CurrentMachine.sCurrMilling = m_SelCurrMilling
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRMILLING_OFFICE, m_SelCurrMilling, sMachIniFile)
          End If
       End Set
    End Property
 
+   Public Sub SetCurrMilling(sCurrOfficeMilling As String)
+      m_SelCurrMilling = sCurrOfficeMilling
+      CurrentMachine.sCurrMilling = m_SelCurrMilling
+      NotifyPropertyChanged("SelCurrMilling")
+   End Sub
+
    Private m_CurrMilling_Visibility As Visibility
    Public Property CurrMilling_Visibility As Visibility
       Get
@@ -225,10 +249,18 @@ Public Class CurrMachWindowVM
          If value <> m_SelCurrPocketing Then
             m_SelCurrPocketing = value
             CurrentMachine.sCurrPocketing = m_SelCurrPocketing
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRPOCKETING_OFFICE, m_SelCurrPocketing, sMachIniFile)
          End If
       End Set
    End Property
 
+   Public Sub SetCurrPocketing(sCurrOfficePocketing As String)
+      m_SelCurrPocketing = sCurrOfficePocketing
+      CurrentMachine.sCurrPocketing = m_SelCurrPocketing
+      NotifyPropertyChanged("SelCurrPocketing")
+   End Sub
+
    Private m_CurrPocketing_Visibility As Visibility
    Public Property CurrPocketing_Visibility As Visibility
       Get
@@ -263,10 +295,18 @@ Public Class CurrMachWindowVM
          If value <> m_SelCurrWaterjetting Then
             m_SelCurrWaterjetting = value
             CurrentMachine.sCurrWaterJetting = m_SelCurrWaterjetting
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRWATERJETTING_OFFICE, m_SelCurrWaterjetting, sMachIniFile)
          End If
       End Set
    End Property
 
+   Public Sub SetCurrWaterjetting(sCurrOfficeWaterjetting As String)
+      m_SelCurrWaterjetting = sCurrOfficeWaterjetting
+      CurrentMachine.sCurrWaterJetting = m_SelCurrWaterjetting
+      NotifyPropertyChanged("SelCurrWaterjetting")
+   End Sub
+
    Private m_CurrWaterjettingQualityList As New List(Of String)
    Public Property CurrWaterjettingQualityList As List(Of String)
       Get
@@ -286,10 +326,18 @@ Public Class CurrMachWindowVM
          If value <> m_SelCurrWaterjettingQuality Then
             m_SelCurrWaterjettingQuality = value
             CurrentMachine.sCurrWaterJettingQuality = m_SelCurrWaterjettingQuality
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRWATERJETTINGQUALITY_OFFICE, m_SelCurrWaterjettingQuality, sMachIniFile)
          End If
       End Set
    End Property
 
+   Public Sub SetCurrWaterjettingQuality(sCurrOfficeWaterjettingQuality As String)
+      m_SelCurrWaterjettingQuality = sCurrOfficeWaterjettingQuality
+      CurrentMachine.sCurrWaterJettingQuality = m_SelCurrWaterjettingQuality
+      NotifyPropertyChanged("SelCurrWaterjetting")
+   End Sub
+
    Private m_CurrWaterjetting_Visibility As Visibility = Visibility.Collapsed
    Public Property CurrWaterjetting_Visibility As Visibility
       Get
@@ -472,11 +520,13 @@ Public Class CurrMachWindowVM
 
       If m_CurrSawingList.Count > 0 Then
          If CurrentMachine.sCurrSawing <> String.Empty Then
-            SelCurrSawing = CurrentMachine.sCurrSawing
+            SetCurrSawing(CurrentMachine.sCurrSawing)
          Else
             Dim sCurrSawing As String = ""
-            GetPrivateProfileString(S_MACH_MACH, K_CURRSAWING, Nothing, sCurrSawing, sMachIniFile)
-            SelCurrSawing = sCurrSawing
+            ' GetPrivateProfileString(S_MACH_MACH, K_CURRSAWING, Nothing, sCurrSawing, sMachIniFile)
+            GetPrivateProfileString(S_MACH_MACH, K_CURRSAWING_OFFICE, Nothing, sCurrSawing, sMachIniFile)
+            'SelCurrSawing = sCurrSawing
+            SetCurrSawing(sCurrSawing)
          End If
       Else
          CurrentMachine.sCurrSawing = String.Empty
@@ -486,7 +536,11 @@ Public Class CurrMachWindowVM
       If CurrentMachine.bDrilling And m_CurrDrillingList.Count > 1 Then
          CurrDrilling_Visibility = Visibility.Visible
          If CurrentMachine.sCurrDrilling <> String.Empty Then
-            SelCurrDrilling = CurrentMachine.sCurrDrilling
+            SetCurrDrilling(CurrentMachine.sCurrDrilling)
+         Else
+            Dim sCurrMachining As String = ""
+            GetPrivateProfileString(S_MACH_MACH, K_CURRDRILLING_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+            SetCurrDrilling(sCurrMachining)
          End If
       Else
          CurrDrilling_Visibility = Visibility.Collapsed
@@ -495,7 +549,11 @@ Public Class CurrMachWindowVM
       If CurrentMachine.bMilling And m_CurrMillingList.Count > 1 Then
          CurrMilling_Visibility = Visibility.Visible
          If CurrentMachine.sCurrMilling <> String.Empty Then
-            SelCurrMilling = CurrentMachine.sCurrMilling
+            SetCurrMilling(CurrentMachine.sCurrMilling)
+         Else
+            Dim sCurrMachining As String = ""
+            GetPrivateProfileString(S_MACH_MACH, K_CURRMILLING_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+            SetCurrMilling(sCurrMachining)
          End If
       Else
          CurrMilling_Visibility = Visibility.Collapsed
@@ -504,7 +562,11 @@ Public Class CurrMachWindowVM
       If CurrentMachine.bPocketing And CurrPocketingList.Count > 1 Then
          CurrPocketing_Visibility = Visibility.Visible
          If CurrentMachine.sCurrPocketing <> String.Empty Then
-            SelCurrPocketing = CurrentMachine.sCurrPocketing
+            SetCurrPocketing(CurrentMachine.sCurrPocketing)
+         Else
+            Dim sCurrMachining As String = ""
+            GetPrivateProfileString(S_MACH_MACH, K_CURRPOCKETING_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+            SetCurrPocketing(sCurrMachining)
          End If
       Else
          CurrPocketing_Visibility = Visibility.Collapsed
@@ -515,10 +577,18 @@ Public Class CurrMachWindowVM
          ' se DB WaterJet abilitato avrò anche la CmBx della Quality solo la CmBx del Waterjetting corrente
          If CurrentMachine.bFromDBWaterJet Then
             If CurrentMachine.sCurrWaterJetting <> String.Empty Then
-               SelCurrWaterjetting = CurrentMachine.sCurrWaterJetting
+               SetCurrWaterjetting(CurrentMachine.sCurrWaterJetting)
+            Else
+               Dim sCurrMachining As String = ""
+               GetPrivateProfileString(S_MACH_MACH, K_CURRWATERJETTING_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+               SetCurrWaterjetting(sCurrMachining)
             End If
             If CurrentMachine.sCurrWaterJettingQuality <> String.Empty Then
-               SelCurrWaterjettingQuality = CurrentMachine.sCurrWaterJettingQuality
+               SetCurrWaterjettingQuality(CurrentMachine.sCurrWaterJettingQuality)
+            Else
+               Dim sCurrMachining As String = ""
+               GetPrivateProfileString(S_MACH_MACH, K_CURRWATERJETTINGQUALITY_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+               SetCurrWaterjettingQuality(sCurrMachining)
             End If
             CurrWaterjettingQuality_Visibility = Visibility.Visible
          Else

EgtStoneLib/ConstMach.vb

@@ -326,6 +326,9 @@ Module ConstMach
    Public Function COL_MCH_DRIPCUT() As Color3d
       Return New Color3d(255, 0, 165)
    End Function
+   Public Function COL_MCH_ONENGRAVE_ANG() As Color3d
+      Return New Color3d(255, 255, 100)
+   End Function
    Public Function COL_MCH_DRIPFREE() As Color3d
       Return New Color3d(192, 0, 128)
    End Function

EgtStoneLib/ConstMachIni.vb

@@ -247,9 +247,13 @@
    Public Const K_CURRDRIPDRILL As String = "CurrDripDrill"
    Public Const K_CURRWATERJET As String = "CurrWaterJet"
    Public Const K_CURRSAWING As String = "CurrSawing"
+   Public Const K_CURRSAWING_OFFICE As String = "CurrOfficeSawing"
    Public Const K_CURRDRILLING As String = "CurrDrilling"
+   Public Const K_CURRDRILLING_OFFICE As String = "CurrOfficeDrilling"
    Public Const K_CURRMILLING As String = "CurrMilling"
+   Public Const K_CURRMILLING_OFFICE As String = "CurrOfficeMilling"
    Public Const K_CURRPOCKETING As String = "CurrPocketing"
+   Public Const K_CURRPOCKETING_OFFICE As String = "CurrOfficePocketing"
    Public Const K_CURRSAWROUGHING As String = "CurrSawRoughing"
    Public Const K_CURRSAWFINISHING As String = "CurrSawFinishing"
    Public Const K_CURRSAWSIDEFINISHING As String = "CurrSawSideFinishing"
@@ -257,7 +261,9 @@
    Public Const K_CURRDRIPSAWING As String = "CurrDripSawing"
    Public Const K_CURRDRIPDRILLING As String = "CurrDripDrilling"
    Public Const K_CURRWATERJETTING As String = "CurrWaterJetting"
+   Public Const K_CURRWATERJETTING_OFFICE As String = "CurrOfficeWaterJetting"
    Public Const K_CURRWATERJETTINGQUALITY As String = "CurrWaterJettingQuality"
+   Public Const K_CURRWATERJETTINGQUALITY_OFFICE As String = "CurrWaterJettingQuality"
 
    Public Const S_MATERIALS As String = "Materials"
    Public Const K_CURRMATERIAL As String = "CurrMaterial"

EgtStoneLib/EstCalc.vb

@@ -247,7 +247,7 @@ Module EstCalc
    Friend Function SetCurrSawing(sCurrSawing As String) As Boolean
       Dim nOperId As Integer = EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Opers")
       If nOperId = GDB_ID.NULL Then Return False
-      Return EgtSetInfo(nOperId, INFO_CURRSAWING, sCurrSawing)
+      Return EgtSetInfo(nOperId, INFO_CURRSAWING, sCurrSawing, True)
    End Function
 
    Friend Function GetCurrSawing() As String
@@ -261,7 +261,7 @@ Module EstCalc
    Friend Function SetCurrMilling(sCurrMilling As String) As Boolean
       Dim nOperId As Integer = EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Opers")
       If nOperId = GDB_ID.NULL Then Return False
-      Return EgtSetInfo(nOperId, INFO_CURRMILLING, sCurrMilling)
+      Return EgtSetInfo(nOperId, INFO_CURRMILLING, sCurrMilling, True)
    End Function
 
    Friend Function GetCurrMilling() As String
@@ -275,7 +275,7 @@ Module EstCalc
    Friend Function SetCurrDrilling(sCurrDrilling As String) As Boolean
       Dim nOperId As Integer = EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Opers")
       If nOperId = GDB_ID.NULL Then Return False
-      Return EgtSetInfo(nOperId, INFO_CURRDRILLING, sCurrDrilling)
+      Return EgtSetInfo(nOperId, INFO_CURRDRILLING, sCurrDrilling, True)
    End Function
 
    Friend Function GetCurrDrilling() As String
@@ -289,7 +289,7 @@ Module EstCalc
    Friend Function SetCurrPocketing(sCurrMilling As String) As Boolean
       Dim nOperId As Integer = EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Opers")
       If nOperId = GDB_ID.NULL Then Return False
-      Return EgtSetInfo(nOperId, INFO_CURRPOCKETING, sCurrMilling)
+      Return EgtSetInfo(nOperId, INFO_CURRPOCKETING, sCurrMilling, True)
    End Function
 
    Friend Function GetCurrPocketing() As String
@@ -303,7 +303,7 @@ Module EstCalc
    Friend Function SetCurrWaterjetting(sCurrMilling As String) As Boolean
       Dim nOperId As Integer = EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Opers")
       If nOperId = GDB_ID.NULL Then Return False
-      Return EgtSetInfo(nOperId, INFO_CURRWATERJETTING, sCurrMilling)
+      Return EgtSetInfo(nOperId, INFO_CURRWATERJETTING, sCurrMilling, True)
    End Function
 
    Friend Function GetCurrWaterjetting() As String

EgtStoneLib/SplitAuto.vb

@@ -92,11 +92,12 @@ Public Module SplitAuto
                   Mach.m_dStartFreeLen = FREELEN_INF + 1
                   Mach.m_dEndFreeLen = FREELEN_INF + 1
                   Dim nEntId, nSub As Integer
-                  If EgtGetMachiningGeometry( 0, nEntId, nSub) Then
-                     If EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse EgtGetType( nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
+                  If EgtGetMachiningGeometry(0, nEntId, nSub) Then
+                     ' EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse
+                     If EgtGetType(nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
                      EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
                      Mach.m_bEnableInvert = GetEnableInvert(nEntId)
                      EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
@@ -383,28 +384,53 @@ Public Module SplitAuto
       For Each nCut As Integer In vCuts
          RemoveMachiningPreview(nCut)
       Next
-      ' Sposto tutte le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      ChangeOperationPhase(nNewPhase)
+      ' ---------------------------------- LAVORAZIONI ----------------------------------
+      Return True
+   End Function
+
+   Friend Sub ChangeOperationPhase(nNewPhase As Integer)
+      ' creo l'elenco delle lavorazioni che devono essere sposate
+      Dim MchList As New List(Of Integer)
+      ' Recupero le lavorazioni disabilitate e le eventuali inglobate nella nuova fase
       Dim nId = EgtGetFirstOperation()
       While nId <> GDB_ID.NULL
          Dim nNextId = EgtGetNextOperation(nId)
          If IsValidMachining(nId) And EgtGetOperationPhase(nId) = nNewPhase - 1 And EgtExistsInfo(nId, INFO_MCH_USER_OFF) Then
-            ' sposto la lavorazione
-            EgtChangeOperationPhase(nId, nNewPhase)
+            ' Provo ad inserire la lavorazione nell'elenco
+            AddMach(MchList, nId)
             ' sposto le inglobate
             Dim sInfo As String = String.Empty
             If EgtGetInfo(nId, INFO_MCH_OTHMID, sInfo) Then
                Dim sItems() As String = sInfo.Split(",".ToCharArray)
-               For Each sId2 In sItems
+               For Each sId2 As String In sItems
                   Dim nId2 As Integer = 0
                   StringToInt(sId2, nId2)
-                  If nId2 > 0 Then EgtChangeOperationPhase(nId2, nNewPhase)
+                  If nId2 > 0 Then
+                     ' Provo ad inserire la lavorazione nell'elenco
+                     AddMach(MchList, nId2)
+                  End If
                Next
             End If
          End If
          nId = nNextId
       End While
-      Return True
-   End Function
+      ' Procedo ora a spostare le lavorazioni nella nuova disposizione
+      For Each ItemMchId As Integer In MchList
+         EgtChangeOperationPhase(ItemMchId, nNewPhase)
+      Next
+   End Sub
+
+   ' Inserisce gli inidici delle lavorazioni evitando di inserire dei doppioni
+   Private Sub AddMach(MchList As List(Of Integer), IdMch As Integer)
+      For Each Item As Integer In MchList
+         If IdMch = Item Then
+            Return
+         End If
+      Next
+      MchList.Add(IdMch)
+   End Sub
 
    '-----------------------------------------------------------------------------------------------
    Friend Function CalculateSplitAuto() As Boolean

EgtStoneLib/VacuumCups.vb

@@ -444,15 +444,14 @@ Module VacuumCups
          Dim dLen, dAngVertDeg, dAngOrizzDeg As Double
          frMinRect.VersX().ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
          dRotAngDeg = dAngOrizzDeg
-         If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
          Dim dPreferredRot As Double = m_dPreferredRot
-         If bRotateVacuumNearExtraStrokeX And (Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45) Then
+         If bRotateVacuumNearExtraStrokeX And Not IsHorizontal(dAngOrizzDeg) Then
             If frMinRect.Orig().x < b3Tab.Center().x Then
                dPreferredRot = m_dPrefVertRotXMinus
             Else
                dPreferredRot = m_dPrefVertRotXPlus
             End If
-         ElseIf bRotateVacuumNearExtraStrokeY And (Math.Abs(dRotAngDeg - 90) > 45 Or Math.Abs(dRotAngDeg - 270) > 45) Then
+         ElseIf bRotateVacuumNearExtraStrokeY And IsHorizontal(dAngOrizzDeg) Then
             ' se l'orientemanto è orizzontale e la macchina è stata abilitata
             If frMinRect.Orig().y < b3Tab.Center().y Then
                dPreferredRot = m_dPrefVertRotYPlus
@@ -460,6 +459,7 @@ Module VacuumCups
                dPreferredRot = m_dPrefVertRotYMinus
             End If
          End If
+         If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
          Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
          While dRotAngDeg - dPreferredRot >= dAngDelta / 2
             dRotAngDeg -= dAngDelta
@@ -530,16 +530,34 @@ Module VacuumCups
       Return dDist
    End Function
 
+   Private Function IsHorizontal(dDegAng As Double) As Boolean
+      If (Math.Abs(dDegAng) > 45 And Math.Abs(dDegAng) < 135) Or (Math.Abs(dDegAng) > 225 And Math.Abs(dDegAng) < 315) Then
+         Return False
+      End If
+      Return True
+   End Function
+
    ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
    Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
-      Dim dX, dY, dZ As Double
-      Dim nStat As Integer
+      ' Posizione Home dell'asse rotante
       Dim dCHome As Double
       EgtGetAxisHomePos("C", dCHome)
-      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      ' Corse dell'asse
+      Dim dCMin As Double
+      EgtGetAxisMin("C", dCMin)
+      Dim dCMax As Double
+      EgtGetAxisMax("C", dCMax)
+      ' Porto l'angolo nel range
+      Dim dRotAngMachDeg As Double = dRotAngDeg + dCHome
+      AdjustAngleInRange(dRotAngMachDeg, dCMin, dCMax)
+      ' Imposto la ventosa come fosse un utensile
       EgtSetCalcTool("", "H4", 1)
-      EgtGetCalcPositions(ptRef, dRotAngDeg + dCHome, 0, nStat, dX, dY, dZ)
-      EgtVerifyOutstroke(dX, dY, dZ, dRotAngDeg + dCHome, 0, nStat)
+      ' Calcolo gli assi macchina
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      EgtGetCalcPositions(ptRef, dRotAngMachDeg, 0, nStat, dX, dY, dZ)
+      ' Verifico le corse
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngMachDeg, 0, nStat)
       Return nStat
    End Function
 

EgtStoneLib/VeinMatchingWindow.xaml

@@ -20,6 +20,7 @@
                        Margin="0,5,0,0"
                        Content="Verify"/>
          <ToggleButton Name="MagneticBtn" Height="40" Width="80"
+                       Visibility="Collapsed"
                        Margin="0,5,0,0"
                        Content="Magnetic"/>
          <Button Name="ExportBtn" Height="40" Width="80"

EgtStoneLib/VeinMatchingWindow.xaml.vb

@@ -4,6 +4,7 @@ Imports System.Collections.ObjectModel
 Imports System.Runtime.InteropServices
 Imports EgtUILib
 Imports EgtWPFLib5
+Imports OmagOFFICE.VeinMatchingWindow
 
 Public Class VeinMatchingWindow
 
@@ -29,6 +30,18 @@ Public Class VeinMatchingWindow
    Private m_locPrev As System.Drawing.Point
    Private m_ptPrev As Point3d
    Private m_ptCen As Point3d
+   ' Gestione rotazione pezzi in fase di Drag
+   Private m_bKeyCtrlPressed As Boolean = False
+   Private m_bKeyLeftShiftPressed As Boolean = False
+   Private m_dAngTotal As Double = 0
+   Private m_dStartAng As Double = 0
+   Private m_bStartRot As Boolean = False
+   Private m_bStartMove As Boolean = False
+
+   Enum ALETTE
+      F = 2
+      A = 1
+   End Enum
 
    Private Sub Window_Initialized(sender As Object, e As EventArgs)
       ' Assegnazione scena all'host e posizionamento nella PlacePageGrid
@@ -249,14 +262,14 @@ Public Class VeinMatchingWindow
                      EgtMovePartToSnapPointOnCollision(nMoveId, True, m_dSnapDist, bSnapMoved)
                   End If
                End If
-            ' Standard
+               ' Standard
             Else
                EgtMove(nMoveId, vtMove)
             End If
             VeinMatching.SetProjectModified()
             EgtDraw()
          End If
-      ' altrimenti rotazione
+         ' altrimenti rotazione
       Else
          ' Ricavo l'angolo di movimento
          Dim vtPrev As Vector3d = m_ptPrev - m_ptCen
@@ -266,7 +279,7 @@ Public Class VeinMatchingWindow
             ' Con verifica di collisione
             If m_bCurrVerify Then
                EgtRotatePart(nMoveId, True, m_ptCen, dAngRotDeg)
-            ' Standard
+               ' Standard
             Else
                EgtRotate(nMoveId, m_ptCen, Vector3d.Z_AX(), dAngRotDeg, GDB_RT.GLOB)
             End If
@@ -286,15 +299,15 @@ Public Class VeinMatchingWindow
          ' Se eseguito drag
          If Not m_bDragToStart Then
             ' Non serve fare alcunché
-         ' Se selezione da eseguire
+            ' Se selezione da eseguire
          ElseIf m_nIdToSel <> GDB_ID.NULL Then
             ' Eseguo la selezione
             EgtSelectObj(m_nIdToSel)
-         ' Se deselezione da eseguire
+            ' Se deselezione da eseguire
          ElseIf m_nIdToDesel <> GDB_ID.NULL Then
             EgtDeselectObj(m_nIdToDesel)
          End If
-      ' Altrimenti selezione/deselezione anche per nesting
+         ' Altrimenti selezione/deselezione anche per nesting
       Else
          ' Se selezione da eseguire
          If m_nIdToSel <> GDB_ID.NULL Then
@@ -322,7 +335,7 @@ Public Class VeinMatchingWindow
             EgtSetCurrentContext(VeinMatchingScene.GetCtx())
             ' Se selezione riuscita, la eseguo anche in VME
             If bSelected Then EgtSelectObj(m_nIdToSel)
-         ' Se deselezione da eseguire
+            ' Se deselezione da eseguire
          ElseIf m_nIdToDesel <> GDB_ID.NULL Then
             ' Eseguo la deselezione in Nesting
             Dim bDeselected As Boolean = False
@@ -500,31 +513,31 @@ Friend Module VeinMatching
       Dim PartId As Integer = EgtGetFirstPart()
       While PartId <> GDB_ID.NULL
          Dim b3Tmp As New BBox3d()
-         if EgtGetBBoxGlob( PartId, GDB_BB.STANDARD, b3Tmp) Then b3Parts.Add( b3Tmp)
+         If EgtGetBBoxGlob(PartId, GDB_BB.STANDARD, b3Tmp) Then b3Parts.Add(b3Tmp)
          PartId = EgtGetNextPart(PartId)
       End While
       ' Se ingombro troppo grande, errore
-      If b3Parts.DimX() > 2 * ( DIM_REG - SAFE_DIST) Or b3Parts.DimY() > 2 * ( DIM_REG - SAFE_DIST) Then
+      If b3Parts.DimX() > 2 * (DIM_REG - SAFE_DIST) Or b3Parts.DimY() > 2 * (DIM_REG - SAFE_DIST) Then
          Return False
       End If
       ' Se fuori dalla regione di validità, li muovo
       Dim vtMove As New Vector3d
       If b3Parts.Min().x < -DIM_REG + SAFE_DIST Then
-         vtMove += New Vector3d( -DIM_REG + SAFE_DIST - b3Parts.Min().x, 0, 0)
-      End If 
+         vtMove += New Vector3d(-DIM_REG + SAFE_DIST - b3Parts.Min().x, 0, 0)
+      End If
       If b3Parts.Min().y < -DIM_REG + SAFE_DIST Then
-         vtMove += New Vector3d( 0, -DIM_REG + SAFE_DIST - b3Parts.Min().y, 0)
-      End If 
+         vtMove += New Vector3d(0, -DIM_REG + SAFE_DIST - b3Parts.Min().y, 0)
+      End If
       If b3Parts.Max().x > DIM_REG - SAFE_DIST Then
-         vtMove += New Vector3d( DIM_REG - SAFE_DIST - b3Parts.Max().x, 0, 0)
-      End If 
+         vtMove += New Vector3d(DIM_REG - SAFE_DIST - b3Parts.Max().x, 0, 0)
+      End If
       If b3Parts.Max().y > DIM_REG - SAFE_DIST Then
-         vtMove += New Vector3d( 0, DIM_REG - SAFE_DIST - b3Parts.Max().y, 0)
-      End If 
+         vtMove += New Vector3d(0, DIM_REG - SAFE_DIST - b3Parts.Max().y, 0)
+      End If
       If Not vtMove.IsSmall() Then
          PartId = EgtGetFirstPart()
          While PartId <> GDB_ID.NULL
-            EgtMove( PartId, vtMove, GDB_RT.GLOB)
+            EgtMove(PartId, vtMove, GDB_RT.GLOB)
             PartId = EgtGetNextPart(PartId)
          End While
       End If
@@ -573,9 +586,9 @@ Friend Module VeinMatching
       EgtSetInfo(nVeinId2, KEY_ORI_ID, nPartId)
       ' Ne garantisco la visibilità
       Dim nStat As Integer = GDB_ST.OFF
-      If Not EgtGetStatus( nVeinId2, nStat) OrElse nStat <> GDB_ST.ON_ Then
-         EgtSetStatus( nVeinId2, GDB_ST.ON_)
-      End If 
+      If Not EgtGetStatus(nVeinId2, nStat) OrElse nStat <> GDB_ST.ON_ Then
+         EgtSetStatus(nVeinId2, GDB_ST.ON_)
+      End If
       ' Se impostato, nascondo scritte, sono nel layer "Region"
       If Not m_bShowText Then
          Dim nVeinRegId As Integer = EgtGetFirstNameInGroup(nVeinId2, NAME_REGION)
@@ -984,7 +997,7 @@ Friend Module VeinMatching
       ' Esporto il file come immagine
       EgtSetCurrentContext(m_nVeinCtx)
       Dim bOk As Boolean = (EgtGetFileType(sFilePath) = FT.IMG)
-      bOk = bOk AndAlso EgtGetImage(DirectCast( EgtGetShowMode(), EgtInterface.SM),
+      bOk = bOk AndAlso EgtGetImage(DirectCast(EgtGetShowMode(), EgtInterface.SM),
                                     New Color3d(255, 255, 255), New Color3d(255, 255, 255),
                                     m_nImgWidth, m_nImgHeight, sFilePath)
       ' Ripristino il contesto originale
@@ -1072,7 +1085,7 @@ Friend Module VeinMatching
       Return (GetVeinPartId(nPartId) <> GDB_ID.NULL)
    End Function
 
-   Friend Function ModifyPartText( nPartId As Integer, sNewText As String, Optional bDraw As Boolean = True) As Boolean
+   Friend Function ModifyPartText(nPartId As Integer, sNewText As String, Optional bDraw As Boolean = True) As Boolean
       ' Verifico esista il contesto del VeinMatching
       If m_nVeinCtx = 0 Then Return True
       ' Recupero il contesto corrente (principale)
@@ -1090,7 +1103,7 @@ Friend Module VeinMatching
          Dim nCurrId As Integer = EgtGetFirstInGroup(nVeinRegId)
          While nCurrId <> GDB_ID.NULL
             If EgtGetType(nCurrId) = GDB_TY.EXT_TEXT Then
-               EgtModifyText( nCurrId, sNewText)
+               EgtModifyText(nCurrId, sNewText)
                Exit While
             End If
             nCurrId = EgtGetNext(nCurrId)
@@ -1706,43 +1719,44 @@ Friend Module VeinMatching
    End Function
 
    Friend Function MoveAlettaSolid(ByRef Item As Aletta, ByRef ThicknessRaw As Double) As Boolean
-
+      ' A: alzatina, F: frontalino
       Dim nType As Integer
       If Not EgtGetInfo(Item.IdSideRef, "AF", nType) Then Return False
 
-      Dim ptSRef, ptERef, ptE As Point3d
+      Dim ptSRef, ptERef, ptS, ptE As Point3d
+      ' Piano cucina
       If Not EgtStartPoint(Item.IdSideRef, GDB_ID.ROOT, ptSRef) Then Return False
       If Not EgtEndPoint(Item.IdSideRef, GDB_ID.ROOT, ptERef) Then Return False
+      ' AlzFront
+      If Not EgtStartPoint(Item.SideId, GDB_ID.ROOT, ptS) Then Return False
       If Not EgtEndPoint(Item.SideId, GDB_ID.ROOT, ptE) Then Return False
 
-      ' verifco che sia già stato ruotato 
-      Dim nInfo3D As Integer = 0
-      EgtGetInfo(Item.SideId, "Info3D", nInfo3D)
+      ' vettore lato cucina
+      Dim vtRotRef As Vector3d = ptERef - ptSRef
+      ' vettore lato AlzFront
+      Dim vtRot As Vector3d = ptE - ptS
 
-      If nInfo3D <> 1 Then
-         ' ruoto il solido intorno al lato di riferimento
-         Dim vtRot As Vector3d = ptERef - ptSRef
-         If nType = 1 Then
-            EgtRotate(Item.PartId, ptE, vtRot, -90, GDB_RT.GLOB)
-         ElseIf nType = 2 Then
-            EgtRotate(Item.PartId, ptE, vtRot, 90, GDB_RT.GLOB)
-         End If
+      ' ruoto il solido intorno al lato di riferimento
+      If nType = ALETTE.A Then
+         EgtRotate(Item.PartId, ptE, vtRot, 90, GDB_RT.GLOB)
+      ElseIf nType = ALETTE.F Then
+         EgtRotate(Item.PartId, ptE, vtRot, -90, GDB_RT.GLOB)
       End If
 
       ' punto di riferimento per la traslazione sul solido
       Dim ptSolid As Point3d
-      If nType = 1 Then
+      If nType = ALETTE.A Then
          ' cerco id della curva che definisce la front face
          Dim nSolidGrp As Integer = EgtGetFirstNameInGroup(Item.PartId, NAME_VM_SOLID)
          Dim nFrontCrvId As Integer = EgtGetFirstInGroup(nSolidGrp)
-         EgtStartPoint(nFrontCrvId, ptSolid)
-      ElseIf nType = 2 Then
-         EgtStartPoint(Item.SideId, ptSolid)
+         EgtStartPoint(nFrontCrvId, GDB_ID.ROOT, ptSolid)
+      ElseIf nType = ALETTE.F Then
+         EgtStartPoint(Item.SideId, GDB_ID.ROOT, ptSolid)
       End If
 
-      Dim ItemFrame As New Frame3d
-      If Not EgtGetGroupGlobFrame(Item.PartId, ItemFrame) Then Return False
-      ptSolid.ToGlob(ItemFrame)
+      ' Dim ItemFrame As New Frame3d
+      ' If Not EgtGetGroupGlobFrame(Item.PartId, ItemFrame) Then Return False
+      ' ptSolid.ToGlob(ItemFrame)
 
       'punto di riferimento per la traslazione sul piano cucina
       Dim ptKitchen As Point3d = ptERef
@@ -1750,6 +1764,16 @@ Friend Module VeinMatching
       Dim vtMove As Vector3d = ptKitchen - ptSolid
       EgtMove(Item.PartId, vtMove, GDB_RT.GLOB)
 
+      ' eventualmente ruoto per allineare l'alzatina al piano cucina
+      Dim dLRef, dAngVRef, dAngHRef As Double
+      vtRotRef.ToSpherical(dLRef, dAngVRef, dAngHRef)
+      Dim dL, dAngV, dAngH As Double
+      vtRot.Rotate(Vector3d.Z_AX, 180)
+      vtRot.ToSpherical(dL, dAngV, dAngH)
+      Dim dDelta As Double = dAngHRef - dAngH
+      If Math.Abs(dDelta) < EPS_ANG_SMALL Then Return True
+      EgtRotate(Item.PartId, ptKitchen, Vector3d.Z_AX, dDelta, GDB_RT.GLOB)
+
       Return True
    End Function
 End Module

InstrumentPanel/PrintPanelV.xaml

@@ -0,0 +1,14 @@
+<EgtFloating:EgtFloatingPanel x:Class="PrintPanelV"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtFloating="clr-namespace:EgtWPFLib5.EgtFloating;assembly=EgtWPFLib5"
+   IsTopDockable="True" IsBottomDockable="False" IsLeftDockable="False"
+   IsRightDockable="False" Style="{StaticResource ToolBar_EgtFloatingPanel}">
+
+   <Button ToolTip="{Binding PrintToolTip}"
+           Style="{StaticResource ToolBar_Button}"
+           Command="{Binding PrintCommand}">
+      <Image Source="/Resources/InstrumentPanel/Print.png" Stretch="Uniform"/>
+   </Button>
+
+</EgtFloating:EgtFloatingPanel>

InstrumentPanel/PrintPanelV.xaml.vb

@@ -0,0 +1,3 @@
+Public Class PrintPanelV
+
+End Class

InstrumentPanel/PrintPanelVM.vb

@@ -0,0 +1,91 @@
+Imports EgtUILib
+Imports EgtWPFLib5
+Public Class PrintPanelVM
+
+   ' Definizione comandi
+   Private m_cmdPrint As ICommand
+
+   Public ReadOnly Property PrintToolTip As String
+      Get
+         ' "Print shading" & vbCrLf & "Print hidden line (Shift)"
+         Return "Print"
+      End Get
+   End Property
+
+#Region "PrintCommand"
+
+   Public ReadOnly Property PrintCommand As ICommand
+      Get
+         If m_cmdPrint Is Nothing Then
+            m_cmdPrint = New Command(AddressOf Print)
+         End If
+         Return m_cmdPrint
+      End Get
+   End Property
+
+   Public Sub Print(ByVal param As Object)
+      Dim SM_Select As SM = SM.SHADING
+
+      ' Imposto la stampa HiddenLine (non è gestita la stampa WireFrame)
+      'If (Keyboard.Modifiers And ModifierKeys.Shift) > 0 Then
+      '   SM_Select = SM.HIDDENLINE
+      '   EgtSetLineAttribs(3)
+      'End If
+
+      ' Gestione stampa in funzione del della visualizzazione corrente
+      If OmagOFFICEMap.refShowPanelVM.WireframeIsChecked Then
+         SM_Select = SM.WIREFRAME
+         EgtSetLineAttribs(3)
+      ElseIf OmagOFFICEMap.refShowPanelVM.HiddenLineIsChecked Then
+         SM_Select = SM.HIDDENLINE
+         EgtSetLineAttribs(3)
+      End If
+
+      Dim printDlg As New PrintDialog
+      Dim sPath = OmagOFFICEMap.refMainWindowVM.MainWindowM.sTempDir & "\Image.png"
+      If printDlg.ShowDialog() Then
+         ' Recupero le dimensioni dell'area di stampa
+         Dim dW As Double = printDlg.PrintableAreaWidth
+         Dim dH As Double = printDlg.PrintableAreaHeight
+         Try
+            ' Prendo l'immagine corrente per la stampa
+            Dim colWhite As New Color3d(255, 255, 255)
+            ' Recupero le dimensioni correnti della pagina di disegno
+            Dim nImgW As Integer = GetWidthDimProjectV()
+            Dim nImgH As Integer = GetHeightDimProjectV()
+            If Not EgtGetImage(SM_Select, colWhite, colWhite, nImgW, nImgH, sPath) Then
+               ' Error in creating the print image
+               EgtOutLog(EgtMsg(50181))
+               EgtSetLineAttribs(1)
+               Return
+            End If
+            EgtSetLineAttribs(1)
+            'Metodo complesso di stampa che permette di rilasciare il file :
+            'carico la bitmap e la metto in uno stream in memoria
+            Dim stream As System.IO.Stream = New System.IO.MemoryStream()
+            Dim bitmap As System.Drawing.Bitmap = New System.Drawing.Bitmap(sPath)
+            bitmap.Save(stream, System.Drawing.Imaging.ImageFormat.Png)
+            bitmap.Dispose()
+            ' la sposto in una BitmapImage
+            Dim bitImage As New System.Windows.Media.Imaging.BitmapImage()
+            bitImage.BeginInit()
+            bitImage.StreamSource = stream
+            bitImage.EndInit()
+            ' la sposto in un Visual Control
+            Dim tmpImg As New Image
+            tmpImg.BeginInit()
+            tmpImg.Source = bitImage
+            tmpImg.Stretch = Stretch.Uniform
+            tmpImg.EndInit()
+            ' eseguo la stampa
+            printDlg.PrintVisual(tmpImg, "Parts Layout")
+         Catch
+            ' Rrror in executing print
+            EgtOutLog(EgtMsg(50182))
+         End Try
+      End If
+   End Sub
+
+#End Region ' PrintCommand
+
+End Class

MainWindow/MainWindowM.vb

@@ -223,8 +223,8 @@ Public Class MainWindowM
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace( sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2410, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2410, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2505, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2505, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.OFFICE_BASE)
       ' Inizializzazione generale di EgtInterface

My Project/AssemblyInfo.vb

@@ -29,8 +29,8 @@ Imports System.Windows
 #End If
 #End If
 <Assembly: AssemblyCompany("Egalware s.r.l.")> 
-<Assembly: AssemblyProduct("OmagOFFICE")> 
-<Assembly: AssemblyCopyright("Copyright ©  2017-2022 by Egalware s.r.l.")> 
+<Assembly: AssemblyProduct("OmagOFFICE")>
+<Assembly: AssemblyCopyright("Copyright ©  2017-2023 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")> 
 <Assembly: ComVisible(false)>
 'In order to begin building localizable applications, set 
@@ -69,6 +69,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.10.1")>
-<Assembly: AssemblyFileVersion("2.4.10.1")>
+<Assembly: AssemblyVersion("2.5.5.1")>
+<Assembly: AssemblyFileVersion("2.5.5.1")>
 

MyMachGroupPanel/MyMachGroupPanelVM.vb

@@ -189,6 +189,10 @@ Public Class MyMachGroupPanelVM
       End If
       ' Verifico che gli utensili delle lavorazioni correnti siano attrezzati (necessario perchè potrei aver cambiato gli utensili delle lavorazioni)
       ' e che le lavorazioni correnti siano compatibili con materiale e spessore
+
+      ' Inizializzo l'elenco delle lavorazioni correnti
+      Dim CurrMachining As New CurrMachWindowVM
+
       ' Lama
       Dim bOkCurrSawing As Boolean = True
       Dim bOkCurrWaterjetting As Boolean = True
@@ -229,12 +233,13 @@ Public Class MyMachGroupPanelVM
       Else
          bOkCurrWaterjetting = False
       End If
-
+      ' Imposto il colore del pulsante SetUp 
       If Not bOkSetUp Then
          OmagOFFICEMap.refMachinePanelVM.SetUp_Background = Brushes.Red
       Else
          OmagOFFICEMap.refMachinePanelVM.SetUp_Background = DirectCast(New BrushConverter().ConvertFrom("#FFDDDDDD"), SolidColorBrush)
       End If
+      ' Imposto il colore di sfondo del pulsante SettingMachinig
       If Not bOkMatThick Or Not bOkCurrSawing Then
          If Not bOkMatThick Or Not bOkCurrWaterjetting Then
             OmagOFFICEMap.refOptionPanelVM.RawPart_Background = Brushes.Red

MySceneHost/MySceneHostVM.vb

@@ -152,17 +152,19 @@ Public Class MySceneHostVM
       MainScene.SetSnapPointType(SP.PT_SKETCH)
    End Sub
 
-   Public Overrides Sub SaveProject()
-      MyBase.SaveProject()
+   Public Overrides Function SaveProject() As Boolean
+      Dim bOk As Boolean = MyBase.SaveProject()
       ' Imposto stato gestione mouse diretto della scena a nessuno
       MainScene.SetStatusNull()
-   End Sub
+      Return bOk
+   End Function
 
-   Public Overrides Sub SaveAsProject()
-      MyBase.SaveAsProject()
+   Public Overrides Function SaveAsProject() As Boolean
+      Dim bOk As Boolean = MyBase.SaveAsProject()
       ' Imposto stato gestione mouse diretto della scena a nessuno
       MainScene.SetStatusNull()
-   End Sub
+      Return bOk
+   End Function
 
    Private Function GetMachineBaseDirs() As String
       ' Trasformo l'elenco dei direttori radice macchina in una stringa del tipo "..\Dir1\Example01|..\Dir2\|Example02"
@@ -183,7 +185,7 @@ Public Class MySceneHostVM
 
 #Region "ProjectManager"
 
-   Public Overrides Sub NewProject()
+   Public Overrides Function NewProject() As Boolean
       EgtSetCurrentContext(MainScene.GetCtx())
       Dim bOk As Boolean = MainController.NewProject()
       ' Eventuale reset VM
@@ -191,9 +193,10 @@ Public Class MySceneHostVM
          VeinMatching.Clear()
       End If
       MainScene.SetStatusNull()
-   End Sub
+      Return bOk
+   End Function
 
-   Public Overrides Sub OpenProject(sFilePath As String)
+   Public Overrides Function OpenProject(sFilePath As String) As Boolean
       EgtSetCurrentContext(MainScene.GetCtx())
       Dim bOk As Boolean = False
       If String.IsNullOrEmpty(sFilePath) Then
@@ -216,33 +219,37 @@ Public Class MySceneHostVM
          Dim sVmFile As String = Path.ChangeExtension(sFile, ".vme")
          VeinMatching.Open(sVmFile)
       End If
-   End Sub
+      Return bOk
+   End Function
 
-   Public Overrides Sub ExportProject()
+   Public Overrides Function ExportProject() As Boolean
+      Dim bOk As Boolean = False
       EgtSetCurrentContext(MainScene.GetCtx())
       ' Verifico che il progetto sia salvato
       If EgtGetModified() Then
-         MessageBox.Show(EgtMsg( 91501), "", MessageBoxButton.OK, MessageBoxImage.Exclamation)
-         Return
+         MessageBox.Show(EgtMsg(91501), "", MessageBoxButton.OK, MessageBoxImage.Exclamation)
+         Return bOk
       End If
       ' Scelta del direttorio di destinazione
       Dim sLastExportDir As String = String.Empty
       GetMainPrivateProfileString(S_GENERAL, K_EXPORTDIR, "", sLastExportDir)
       Dim DirDlg As New System.Windows.Forms.FolderBrowserDialog
-      DirDlg.Description = EgtMsg( 91502)   ' Seleziona il direttorio di esportazione
+      DirDlg.Description = EgtMsg(91502)   ' Seleziona il direttorio di esportazione
       DirDlg.SelectedPath = sLastExportDir
-      If DirDlg.ShowDialog() <> Windows.Forms.DialogResult.OK Then Return
+      If DirDlg.ShowDialog() <> Windows.Forms.DialogResult.OK Then Return bOk
       WriteMainPrivateProfileString(S_GENERAL, K_EXPORTDIR, DirDlg.SelectedPath)
       ' Eseguo esportazione
       If ExecExport(DirDlg.SelectedPath) Then
          ' Esportazione conclusa con successo
-         OmagOFFICEMap.refStatusBarVM.SetOutputMessage( EgtMsg( 91504), 5, MSG_TYPE.INFO)
+         OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(91504), 5, MSG_TYPE.INFO)
+         bOk = True
       Else
          ' Errore nell'esportazione
-         MessageBox.Show( EgtMsg( 91503), "", MessageBoxButton.OK, MessageBoxImage.Error)
+         MessageBox.Show(EgtMsg(91503), "", MessageBoxButton.OK, MessageBoxImage.Error)
       End If
       EgtSetCurrentContext(MainScene.GetCtx())
-   End Sub
+      Return bOk
+   End Function
 
    Private Function ExecExport(sDirDest As String) As Boolean
       ' salvo il nome della macchina correntemente selezionata

OmagOFFICE.vbproj

@@ -213,7 +213,11 @@
     <Compile Include="EgtStoneLib\VeinMatchingWindow.xaml.vb">
       <DependentUpon>VeinMatchingWindow.xaml</DependentUpon>
     </Compile>
+    <Compile Include="InstrumentPanel\PrintPanelV.xaml.vb">
+      <DependentUpon>PrintPanelV.xaml</DependentUpon>
+    </Compile>
     <Compile Include="InstrumentPanel\MyInstrumentPanelVM.vb" />
+    <Compile Include="InstrumentPanel\PrintPanelVM.vb" />
     <Compile Include="MachinePanel\MyMachinePanelVM.vb" />
     <Compile Include="MyMachGroupPanel\MyMachGroupPanelVM.vb" />
     <Compile Include="MachinePanel\MachinePanelV.xaml.vb">
@@ -247,6 +251,10 @@
     </Compile>
     <Compile Include="OptionPanel\MachiningTab\ModifStartEndCutWindowVM.vb" />
     <Compile Include="OptionPanel\MachiningTab\ModifStartEndWjWindowVM.vb" />
+    <Compile Include="OptionPanel\MachiningTab\ModifyQualityV.xaml.vb">
+      <DependentUpon>ModifyQualityV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="OptionPanel\MachiningTab\ModifyQualityVM.vb" />
     <Compile Include="OptionPanel\MachiningTab\MoveRawModeV.xaml.vb">
       <DependentUpon>MoveRawModeV.xaml</DependentUpon>
     </Compile>
@@ -389,6 +397,10 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="InstrumentPanel\PrintPanelV.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </Page>
     <Page Include="MachinePanel\MachinePanelV.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
@@ -433,6 +445,10 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="OptionPanel\MachiningTab\ModifyQualityV.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="OptionPanel\MachiningTab\MoveRawModeV.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
@@ -691,6 +707,9 @@
   <ItemGroup>
     <Resource Include="Resources\TopCommandBar\DxfOut.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\InstrumentPanel\Print.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagOFFICE\OmagOFFICER32.exe

OptionPanel/MachiningTab/MachiningTabV.xaml

@@ -7,20 +7,20 @@
       <Button Style="{StaticResource OptionPanel_Button}"
               Command="{Binding PrevCommand}"
               IsEnabled="{Binding PrevIsEnabled}"
-              Margin="0,0,2.5,0">
+              Margin="0,0,0,0">
          <Image Source="/Resources/MachiningTab/BackArrow.png"/>
       </Button>
       <Button Style="{StaticResource OptionPanel_Button}"
               Command="{Binding NextCommand}"
               IsEnabled="{Binding NextIsEnabled}"
-              Margin="0,0,2.5,0">
+              Margin="0,0,0,0">
          <Image Source="/Resources/MachiningTab/ForwardArrow.png"/>
       </Button>
       <Button Style="{StaticResource OptionPanel_Button}"
               Content="{Binding ModifyMsg}"
               Command="{Binding ModifyCommand}"
               IsEnabled="{Binding ModifyIsEnabled}"
-              Margin="0,0,2.5,0"/>
+              Margin="0,0,0,0"/>
       <Button Style="{StaticResource OptionPanel_Button}"
               Content="{Binding AutoMsg}"
               Command="{Binding AutoCommand}"

OptionPanel/MachiningTab/ModifyQualityV.xaml

@@ -0,0 +1,53 @@
+<EgtWPFLib5:EgtCustomWindow x:Class="ModifyQualityV"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+   IsMinimizable="False"
+   ShowInTaskbar="False"
+   Title="{Binding Title}"
+   Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
+   Height="200" Width="400"
+   WindowStartupLocation="CenterOwner">
+
+   <Grid>
+      <Grid.ColumnDefinitions>
+         <ColumnDefinition Width="0.5*"/>
+         <ColumnDefinition Width="4*"/>
+         <ColumnDefinition Width="4*"/>
+         <ColumnDefinition Width="0.5*"/>
+      </Grid.ColumnDefinitions>
+      <Grid.RowDefinitions>
+         <RowDefinition Height="0.5*"/>
+         <RowDefinition Height="0.5*"/>
+         <RowDefinition Height="0.5*"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="0.5*"/>
+      </Grid.RowDefinitions>
+
+      <TextBlock Grid.Column="1" Grid.Row="1" Margin="0,5,0,0"
+                        Style="{StaticResource OptionTextBlock}" Text="{Binding ValueMsg}"/>
+      <ComboBox ItemsSource="{Binding QualityList}"
+                SelectedItem="{Binding SelectedQuality}"
+                Grid.Column="2" Grid.Row="1" Margin="10,5,10,0"/>
+
+      <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1" Grid.ColumnSpan="2">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.5*"/>
+            <ColumnDefinition Width="2*"/>
+            <ColumnDefinition Width="0.5*"/>
+            <ColumnDefinition Width="2*"/>
+            <ColumnDefinition Width="0.5*"/>
+         </Grid.ColumnDefinitions>
+
+         <Button Name="OkBtn" Content="{Binding OkMsg}" Grid.Column="1"
+                 Style="{DynamicResource ToolBar_TextButton}">
+         </Button>
+         <Button Content="{Binding ExitMsg}" Grid.Column="3"
+                    IsCancel="True"
+                    Style="{DynamicResource ToolBar_TextButton}">
+         </Button>
+
+      </Grid>
+
+   </Grid>
+</EgtWPFLib5:EgtCustomWindow>

OptionPanel/MachiningTab/ModifyQualityV.xaml.vb

@@ -0,0 +1,6 @@
+Public Class ModifyQualityV
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      DialogResult = True
+   End Sub
+End Class

OptionPanel/MachiningTab/ModifyQualityVM.vb

@@ -0,0 +1,61 @@
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib5
+Public Class ModifyQualityVM
+   Inherits VMBase
+
+   Private m_Title As String = String.Empty
+   Public Property Title As String
+      Get
+         Return m_Title
+      End Get
+      Set(value As String)
+         m_Title = value
+      End Set
+   End Property
+   Public ReadOnly Property ValueMsg As String
+      Get
+         Return EgtMsg(MSG_SPLITPAGEUC + 35)
+      End Get
+   End Property
+
+   Public ReadOnly Property OkMsg As String
+      Get
+         Return EgtMsg(91651)          'Ok
+      End Get
+   End Property
+
+   Public ReadOnly Property ExitMsg As String
+      Get
+         Return EgtMsg(91652)          'Annulla
+      End Get
+   End Property
+
+   Private m_QualityList As New ObservableCollection(Of String)
+
+   Public Property QualityList As ObservableCollection(Of String)
+      Get
+         Return m_QualityList
+      End Get
+      Set(value As ObservableCollection(Of String))
+         m_QualityList = value
+      End Set
+   End Property
+
+   Private m_SelectedQuality As String
+
+   Public Property SelectedQuality As String
+      Get
+         Return m_SelectedQuality
+      End Get
+      Set(value As String)
+         m_SelectedQuality = value
+      End Set
+   End Property
+
+   Sub New()
+
+   End Sub
+
+End Class

OptionPanel/MachiningTab/SplitModeV.xaml

@@ -7,17 +7,17 @@
       <ListBox ItemsSource="{Binding ItemList}"
                DisplayMemberPath="Name"
                SelectionMode="Extended"
-               Height="250" Margin="0,0,0,5">
-          <ListBox.ItemContainerStyle>
-              <Style TargetType="ListBoxItem">
-                  <Style.Triggers>
-                      <DataTrigger Binding="{Binding bIsActive}" Value="False">
-                          <Setter Property="Foreground" Value="{StaticResource Omag_Gray}"/>
-                      </DataTrigger>
-                  </Style.Triggers>
-                  <Setter Property="IsSelected" Value="{Binding IsSelected, Mode=TwoWay}" />
-              </Style>
-          </ListBox.ItemContainerStyle>
+               Height="200" Margin="0,0,0,5">
+         <ListBox.ItemContainerStyle>
+            <Style TargetType="ListBoxItem">
+               <Style.Triggers>
+                  <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                     <Setter Property="Foreground" Value="{StaticResource Omag_Gray}"/>
+                  </DataTrigger>
+               </Style.Triggers>
+               <Setter Property="IsSelected" Value="{Binding IsSelected, Mode=TwoWay}" />
+            </Style>
+         </ListBox.ItemContainerStyle>
       </ListBox>
 
       <Grid Margin="0,0,0,5">
@@ -44,7 +44,7 @@
       </Grid>
 
       <Border Margin="0,0,0,5" Style="{StaticResource Border}">
-         
+
          <UniformGrid Columns="3">
 
             <Button Content="{Binding OnOffMsg}"
@@ -65,29 +65,37 @@
       </Border>
 
       <Border Margin="0,0,0,5" Style="{StaticResource Border}">
-         
+
          <StackPanel>
-            
+
             <UniformGrid Columns="3" Margin="0,0,0,5">
-                <Grid>
-                   <Button Content="{Binding CutMsg}"
+               <Grid>
+                  <Button Content="{Binding CutMsg}"
                            Style="{StaticResource OptionPanel_TextWrapButton}"
                            Command="{Binding CutCommand}"
                            Visibility="{Binding CutBtnVisibility}"
                            Margin="0,0,2.5,0"/>
-                   <ToggleButton Grid.Row="0"
+                  <ToggleButton Grid.Row="0"
                            Content="{Binding BridgeMsg}"           
                            Style="{StaticResource OptionPanel_ToggleWrapButton}"
                            IsChecked="{Binding BridgeBtn_IsChecked}"
                            Visibility="{Binding BridgeBtnVisibility}"
                            Margin="0,0,2.5,0" Padding="0"/>
-                </Grid>
-                
-               <Button Content="{Binding CutStartMsg}"
+               </Grid>
+
+               <Grid>
+                  <Button Content="{Binding CutStartMsg}"
                        Style="{StaticResource OptionPanel_TextWrapButton}"
                        Command="{Binding CutStartCommand}"
                        Visibility="{Binding CutStartBtnVisibility}"
                        Margin="2.5,0,2.5,0"/>
+                  <Button Content="{Binding QualityMsg}"
+                       Style="{StaticResource OptionPanel_TextWrapButton}"
+                       Command="{Binding QualityCommand}"
+                       Visibility="{Binding QualityBtnVisibility}"
+                       Margin="2.5,0,2.5,0"/>
+               </Grid>
+
                <Grid>
                   <Button Content="{Binding CutEndMsg}"
                           Style="{StaticResource OptionPanel_TextWrapButton}"
@@ -125,11 +133,11 @@
             </Grid>
 
          </StackPanel>
-         
+
       </Border>
 
       <Border Margin="0,0,0,5" Style="{StaticResource Border}">
-         
+
          <StackPanel>
 
             <UniformGrid Columns="3" Margin="0,0,0,5">
@@ -149,11 +157,11 @@
                        Command="{Binding AllCenStartCommand}"
                        Visibility="{Binding AllCenStartBtnVisibility}"
                        Margin="2.5,0,0,0"/>
-               
+
             </UniformGrid>
 
             <UniformGrid Columns="3" Margin="0,0,0,5">
-              
+
                <Button Content="{Binding OutCenEndMsg}"
                        Style="{StaticResource OptionPanel_TextWrapButton}"
                        Command="{Binding OutCenEndCommand}"
@@ -195,14 +203,14 @@
             </UniformGrid>
 
             <UniformGrid Columns="3" Margin="0,0,0,5">
-                <!--Bottone invisibile per permetter il corretto allineamento-->
-                <Button Content="{Binding }" Grid.Column="0"
+               <!--Bottone invisibile per permetter il corretto allineamento-->
+               <Button Content="{Binding }" Grid.Column="0"
                        Style="{StaticResource OptionPanel_TextWrapButton}"
                        Command="{Binding }"
                         Visibility="Hidden"
                        Margin="2.5,0,2.5,0"/>
-                    <!--Inverti direzione di taglio-->
-                    <Button Content="{Binding InvertMsg}" Grid.Column="0"
+               <!--Inverti direzione di taglio-->
+               <Button Content="{Binding InvertMsg}" Grid.Column="0"
                        Style="{StaticResource OptionPanel_TextWrapButton}"
                        Command="{Binding InvertCommand}"
                             Visibility="{Binding InvertBtnVisibility}"
@@ -210,7 +218,7 @@
 
             </UniformGrid>
 
-            </StackPanel>
+         </StackPanel>
 
       </Border>
 

OptionPanel/MachiningTab/SplitModeVM.vb

@@ -48,6 +48,8 @@ Public Class SplitModeVM
    Private m_bDragging As Boolean = False
    ' Selected cut
    Private m_nSelected As Integer = GDB_ID.NULL
+   ' Abilita la mofica Inizio fine per i tagli interni sugli angoli
+   Private m_StartEndModifyOnIntCorner As Boolean = False
 
    Private m_ItemList As New ObservableCollection(Of NameIdLsBxItem)
    Public ReadOnly Property ItemList As ObservableCollection(Of NameIdLsBxItem)
@@ -254,6 +256,18 @@ Public Class SplitModeVM
       End Set
    End Property
 
+   Private m_QualityBtnVisibility As Visibility = Visibility.Hidden
+
+   Public Property QualityBtnVisibility As Visibility
+      Get
+         Return m_QualityBtnVisibility
+      End Get
+      Set(value As Visibility)
+         m_QualityBtnVisibility = value
+         NotifyPropertyChanged(NameOf(QualityBtnVisibility))
+      End Set
+   End Property
+
    Private m_BridgeBtn_IsChecked As Boolean = False
    Public Property BridgeBtn_IsChecked As Boolean
       Get
@@ -400,6 +414,12 @@ Public Class SplitModeVM
       End Get
    End Property
 
+   Public ReadOnly Property QualityMsg As String
+      Get
+         Return "Quality"
+      End Get
+   End Property
+
 #End Region    ' Messages
 
    ' Definizione comandi
@@ -423,6 +443,7 @@ Public Class SplitModeVM
    Private m_cmdModifEnd As ICommand
    Private m_cmdPause As ICommand
    Private m_cmdInvert As ICommand
+   Private m_cmdQuality As ICommand
 
 #End Region    ' FIELDS & PROPERTIES
 
@@ -447,6 +468,8 @@ Public Class SplitModeVM
       'm_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
       m_nDragInd = -1
       m_nDragType = 0
+      ' verifico se è abilitata la possibiltà di allungare i lati interni
+      m_StartEndModifyOnIntCorner = (GetPrivateProfileInt(S_NEST, K_STARTENDMODIFYONINTCORNER, 0, sMachIniFile) <> 0)
       ' Nascondo eventuali pezzi in parcheggio
       EstCalc.HideParkedParts()
       ' Nascondo eventuale contorno da foto
@@ -863,9 +886,11 @@ Public Class SplitModeVM
          If CutBtnVisibility = Visibility.Hidden Then
             BridgeBtnVisibility = Visibility.Visible
             BridgeDeleteBtnVisibility = Visibility.Visible
+            QualityBtnVisibility = Visibility.Visible
          Else
             BridgeBtnVisibility = Visibility.Hidden
             BridgeDeleteBtnVisibility = Visibility.Hidden
+            QualityBtnVisibility = Visibility.Hidden
          End If
       Else
          BridgeBtnVisibility = Visibility.Hidden
@@ -1967,10 +1992,27 @@ Public Class SplitModeVM
 
             Dim bRepeat As Boolean = False
             Do
+               ' Se c'è limite alla lunghezza libera
+               If m_MachiningList(nI).m_dStartFreeLen < FREELEN_INF Then
+                  ' se abilitati i controlli sugli allungamenti dei lati interni
+                  If Not m_StartEndModifyOnIntCorner Then
+                     ' Recupero sicurezza in corner interno
+                     Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, CurrentMachine.sMachIniFile), 10 * EPS_SMALL)
+                     ' Recupero lunghezza baffo del taglio
+                     Dim nPvId As Integer = GDB_ID.NULL
+                     EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+                     Dim dDT As Double = 0
+                     EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                     dUsal = Math.Min(dUsal, m_MachiningList(nI).m_dStartFreeLen - dDT - dCornerSafety)
+                  End If
+               End If
                EgtSetCurrMachining(nOperId)
                Dim dAddLen As Double = 0
                EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
-               If dAddLen - dOrigUsal < -10 * EPS_SMALL Then Return
+               ' verifico che non sia sull'angolo interno (altrimenti vieto la modifica)
+               If Not m_StartEndModifyOnIntCorner And (dAddLen - dOrigUsal < -10 * EPS_SMALL) Then
+                  Return
+               End If
                EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen + dUsal - dOrigUsal)
                EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dUsal)
                UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
@@ -2130,10 +2172,24 @@ Public Class SplitModeVM
             End If
             Dim bRepeat As Boolean = False
             Do
+               ' Se c'è limite alla lunghezza libera
+               If m_MachiningList(nI).m_dEndFreeLen < FREELEN_INF Then
+                  ' se abilitati i controlli sugli allungamenti dei lati interni
+                  If Not m_StartEndModifyOnIntCorner Then
+                     ' Recupero sicurezza in corner interno
+                     Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, CurrentMachine.sMachIniFile), 10 * EPS_SMALL)
+                     ' Recupero lunghezza baffo del taglio
+                     Dim nPvId As Integer = GDB_ID.NULL
+                     EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+                     Dim dDT As Double = 0
+                     EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                     dUeal = Math.Min(dUeal, m_MachiningList(nI).m_dEndFreeLen - dDT - dCornerSafety)
+                  End If
+               End If
                EgtSetCurrMachining(nOperId)
                Dim dAddLen As Double = 0
                EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
-               If dAddLen - dOrigUeal < -10 * EPS_SMALL Then
+               If Not m_StartEndModifyOnIntCorner And (dAddLen - dOrigUeal < -10 * EPS_SMALL) Then
                   Return
                End If
                EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen + dUeal - dOrigUeal)
@@ -2570,6 +2626,72 @@ Public Class SplitModeVM
 
 #End Region    ' Bridge
 
+#Region "Quality"
+
+   Public ReadOnly Property QualityCommand As ICommand
+      Get
+         If m_cmdQuality Is Nothing Then
+            m_cmdQuality = New Command(AddressOf ModifyQuality)
+         End If
+         Return m_cmdQuality
+      End Get
+   End Property
+
+   Public Sub ModifyQuality()
+      Dim bFirstWJ As Boolean = True
+      Dim sQuality As String = String.Empty
+      ' Recupero la lavorazione corrente
+      If m_CurrFirstInd = -1 Then Return
+      Dim bGenModif As Boolean = False
+      For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
+         Dim nI As Integer = m_ItemList(Index).Ind
+         Dim nOperId As Integer = m_MachiningList(nI).m_nId
+         Dim nMachiningType As Integer = EgtGetOperationType(nOperId)
+         ' se altrimenti getto d'acqua
+         If nMachiningType = MCH_MY.WATERJETTING Then
+            ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
+            If bFirstWJ Then
+               EgtSetCurrMachining(nOperId)
+               ' Dialogo richiesta valore
+               '(m_MainWindow, m_MainWindow.m_CurrentMachine.Qualities, "Quality")
+               Dim ModifyQualityWnd As New ModifyQualityV
+               Dim ModifyQuality As New ModifyQualityVM
+               ModifyQuality.Title = "Quality"
+               ModifyQuality.QualityList = CurrentMachine.Qualities
+               ModifyQualityWnd.DataContext = ModifyQuality
+               ModifyQualityWnd.Owner = Application.Current.MainWindow
+               If EgtGetInfo(nOperId, "Quality", sQuality) Then
+                  ModifyQuality.SelectedQuality = sQuality
+               Else
+                  ModifyQuality.SelectedQuality = CurrentMachine.sCurrWaterJettingQuality
+               End If
+               If Not ModifyQualityWnd.ShowDialog() Then Return
+               sQuality = ModifyQuality.SelectedQuality
+               ' comunico che ho letto il primo dato
+               bFirstWJ = False
+
+            End If
+            ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
+            ' Modifica della lavorazione
+            EgtSetCurrMachining(nOperId)
+            EgtSetInfo(nOperId, "Quality", sQuality)
+            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+            ' verifico interferenza
+            bGenModif = True
+         End If
+      Next
+      ' Se modificato qualcosa
+      If bGenModif Then
+         EgtDraw()
+         m_bModified = True
+      End If
+   End Sub
+
+#End Region    ' Quality
+
    Friend Sub OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
       If Not m_bActive OrElse OmagOFFICEMap.refMachiningTabVM.IsShow Then Return

OptionPanel/NestingTab/NestingTabVM.vb

@@ -31,6 +31,13 @@ Public Class NestingTabVM
    Private m_ptPrev As Point3d
    Private m_vtTotMove As Vector3d
    Private m_dSnapDist As Double = 0
+   ' Gestione rotazione pezzi in fase di Drag
+   Private m_bKeyCtrlPressed As Boolean = False
+   Private m_bKeyLeftShiftPressed As Boolean = False
+   Private m_dAngTotal As Double = 0
+   Private m_dStartAng As Double = 0
+   Private m_bStartRot As Boolean = False
+   Private m_bStartMove As Boolean = False
    ' Abilitazioni TrfData e CsvData
    Private m_bTrfData As Boolean = False
    Private m_bCsvData As Boolean = False
@@ -151,7 +158,7 @@ Public Class NestingTabVM
       End Get
       Set(value As Visibility)
          m_CsvData_Visibility = value
-         NotifyPropertyChanged( "CsvData_Visibility")
+         NotifyPropertyChanged("CsvData_Visibility")
       End Set
    End Property
 
@@ -270,7 +277,7 @@ Public Class NestingTabVM
 
    Friend Function InitNesting() As Boolean
       ' Se previsto, abilito bottone VeinMatching
-      If Not IsNothing( OmagOFFICEMap.refMainWindowVM.VeinMatchingWnd) Then
+      If Not IsNothing(OmagOFFICEMap.refMainWindowVM.VeinMatchingWnd) Then
          OmagOFFICEMap.refVeinMatchPanelVM.VeinMatchIsEnabled = True
       End If
       ' Abilitazione TrfData
@@ -280,7 +287,7 @@ Public Class NestingTabVM
       m_bCsvData = Not m_bTrfData And
                    (GetMainPrivateProfileInt(S_COMPO, K_CSVDATA, 0) <> 0)
       ' Se previsto, abilito bottone CsvData
-      CsvData_Visibility = If( m_bCsvData, Visibility.Visible, Visibility.Collapsed)
+      CsvData_Visibility = If(m_bCsvData, Visibility.Visible, Visibility.Collapsed)
       ' Imposto il corretto contesto
       EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
       ' aggiorno dati del grezzo
@@ -358,7 +365,7 @@ Public Class NestingTabVM
 
    Private Sub AutomaticInsert()
       EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
-      OmagOFFICEMap.refStatusBarVM.SetOutputMessage( EgtMsg( 90340))       ' Nesting Automatico in corso
+      OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(90340))       ' Nesting Automatico in corso
       Dim bWrongTrf As Boolean = False
       Dim vParts As New List(Of Integer)
       ' Ciclo di pre-inserimento in tavola dei pezzi selezionati
@@ -376,7 +383,7 @@ Public Class NestingTabVM
          End If
          ' Lo preparo in tavola, se possibile
          If PreInsertOnePart(nId) Then
-            vParts.Add( nId)
+            vParts.Add(nId)
          Else
             EgtSetStatus(nId, GDB_ST.ON_)
             VeinMatching.OnDeselectPart(nId)
@@ -391,12 +398,12 @@ Public Class NestingTabVM
       Dim bAligned As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_NEST_ALIGNED, 0, CurrentMachine.sMachIniFile) <> 0)
       EnableReferenceRegion(bAligned)
       ' Eseguo nesting automatico
-      Dim bOpimizeOnX As Boolean = ( GetMainPrivateProfileInt( S_NEST, K_AUTOMATICOPTIMIZE, 2) = 1)
+      Dim bOpimizeOnX As Boolean = (GetMainPrivateProfileInt(S_NEST, K_AUTOMATICOPTIMIZE, 2) = 1)
       Dim bGuillotineMode As Boolean = bAligned
-      Dim nAutomaticMaxTime As Integer = GetMainPrivateProfileInt( S_NEST, K_AUTOMATICMAXTIME, 20)
-      Dim dPartTime As Double = If( bGuillotineMode, 1.0, 0.5)
-      Dim nMaxTime As Integer = Math.Min( CInt( 2 + dPartTime * vParts.Count()), nAutomaticMaxTime)
-      EgtAutomaticPackParts( vParts, bOpimizeOnX, CurrentMachine.bReducedCut, bGuillotineMode, nMaxTime)
+      Dim nAutomaticMaxTime As Integer = GetMainPrivateProfileInt(S_NEST, K_AUTOMATICMAXTIME, 20)
+      Dim dPartTime As Double = If(bGuillotineMode, 1.0, 0.5)
+      Dim nMaxTime As Integer = Math.Min(CInt(2 + dPartTime * vParts.Count()), nAutomaticMaxTime)
+      EgtAutomaticPackParts(vParts, bOpimizeOnX, CurrentMachine.bReducedCut, bGuillotineMode, nMaxTime)
       ' Sistemo i pezzi
       For Each nPartId As Integer In vParts
          ' se pezzo inserito
@@ -404,11 +411,11 @@ Public Class NestingTabVM
             VeinMatching.OnInsertPartInRaw(nPartId)
             ' Eventuale aggiunta solido per taglio da sotto
             UpdateSolidForDrip(nPartId)
-         ' altrimenti rifiutato
-         else
+            ' altrimenti rifiutato
+         Else
             ' Ripristino lo stato originale
-            PreRemoveOnePart( Math.Abs( nPartId))
-            VeinMatching.OnDeselectPart( Math.Abs( nPartId))
+            PreRemoveOnePart(Math.Abs(nPartId))
+            VeinMatching.OnDeselectPart(Math.Abs(nPartId))
          End If
       Next
       ' Aggiorno flag selezionati
@@ -423,6 +430,93 @@ Public Class NestingTabVM
       End If
    End Sub
 
+   Private Sub VerifyMove()
+      If m_bVerify Then
+         ' Determino cosa verificare
+         Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
+         ' Aggiorno regioni per nesting
+         UpdateNestRegions()
+         EnableReferenceRegion(False)
+         ' Eseguo verifica
+         If VerifyTrfData(nMoveId) And EgtVerifyPart(nMoveId, CurrentMachine.bReducedCut) Then
+            EstCalc.ResetOrderMachiningFlag()
+            ' Non superata riporto alla posizione iniziale
+         Else
+            If m_bFromParking Then
+               OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+               PreRemoveOnePart(nMoveId)
+               VeinMatching.OnRemovePartFromRaw(nMoveId)
+            Else
+               EgtMove(nMoveId, -m_vtTotMove)
+               ' Eventuale notifica al VeinMatching
+               If nMoveId = GDB_ID.SEL Then
+                  Dim nId As Integer = EgtGetFirstSelectedObj()
+                  While nId <> GDB_ID.NULL
+                     VeinMatching.OnMovePartInRaw(nId)
+                     nId = EgtGetNextSelectedObj()
+                  End While
+               Else
+                  VeinMatching.OnMovePartInRaw(nMoveId)
+               End If
+            End If
+            '---------------------- COUNTER PART ----------------------
+            ' solo se pezzo disposto in tavola
+            If m_bFromParking Then
+               Dim sRefGroup As String = String.Empty
+               If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
+                  ' accendo il layer che contiene il contatore (spento in fase di Drag)
+                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
+                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
+                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
+                  CountPartInFamily(sRefGroup)
+               End If
+            End If
+            '---------------------- COUNTER PART ----------------------
+         End If
+         m_bFromParking = False
+      End If
+   End Sub
+
+   Private Sub VerifyRot()
+      ' se comando Shift è stato attivato
+      If m_bKeyLeftShiftPressed Then
+         ' Determino cosa verificare
+         Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
+         If Not EgtVerifyPart(nMoveId, CurrentMachine.bReducedCut) Then
+            Dim ptCen As Point3d
+            If Not EgtGetPartPartClusterCenterGlob(nMoveId, ptCen) Then Return
+            EgtRotate(nMoveId, ptCen, Vector3d.Z_AX(), -m_dAngTotal, GDB_RT.GLOB)
+         End If
+      End If
+      ' resetto i valori 
+      m_dStartAng = 0
+      m_dAngTotal = 0
+      m_bStartRot = False
+   End Sub
+
+   ' verifica che la rotazione sia ammessa
+   Private Function RotatePartInsideBond(dAngRotDeg As Double, nIdMove As Integer) As Boolean
+      ' Verifico se ci sono dei pezzi bloccati in rotazione
+      Dim bLockedRot As Boolean = GetLockOnRotation(nIdMove)
+      ' Se tutti i pezzi possono ruotare
+      If Not bLockedRot Then
+         ' Calcolo il centro di rotazione come centro del cluster
+         Dim ptCen As Point3d
+         If Not EgtGetPartPartClusterCenterGlob(nIdMove, ptCen) Then Return False
+         ' Aggiorno regioni per nesting
+         UpdateNestRegions()
+         EnableReferenceRegion(False)
+         ' Verifico rotazione complessiva
+         EgtRotate(nIdMove, ptCen, Vector3d.Z_AX(), dAngRotDeg, GDB_RT.GLOB)
+         If EgtVerifyPart(nIdMove, CurrentMachine.bReducedCut) Then Return True
+         ' Provo rotazione parziale (dopo aver annullato la complessiva)
+         EgtRotate(nIdMove, ptCen, Vector3d.Z_AX(), -dAngRotDeg, GDB_RT.GLOB)
+         Return EgtRotatePart(nIdMove, CurrentMachine.bReducedCut, ptCen, dAngRotDeg)
+      Else
+         Return False
+      End If
+   End Function
+
    Private Function RotateCluster(ByVal dAngRotDeg As Double) As Boolean
       ' Se non ci sono pezzi selezionati, esco
       If EgtGetSelectedObjCount() = 0 Then Return True
@@ -432,7 +526,7 @@ Public Class NestingTabVM
          Dim nId As Integer = EgtGetFirstSelectedObj()
          While nId <> GDB_ID.NULL
             ' Se pezzo con rotazione libera
-            If Not EgtExistsInfo( nId, INFO_PARTROT) Then
+            If Not EgtExistsInfo(nId, INFO_PARTROT) Then
                ' Calcolo il centro di rotazione come centro del pezzo
                Dim ptCen As Point3d
                If Not EgtGetPartPartClusterCenterGlob(nId, ptCen) Then Return False
@@ -466,40 +560,22 @@ Public Class NestingTabVM
             nId = EgtGetNextSelectedObj()
          End While
          Return True
-      ' Altrimenti li ruoto tenendo conto delle collisioni
+         ' Altrimenti li ruoto tenendo conto delle collisioni
       Else
-         ' Verifico se ci sono dei pezzi bloccati in rotazione
-         Dim bLockedRot As Boolean = GetLockOnRotation( GDB_ID.SEL)
-            ' Se tutti i pezzi possono ruotare
-            If Not bLockedRot Then
-            ' Calcolo il centro di rotazione come centro del cluster
-            Dim ptCen As Point3d
-            If Not EgtGetPartPartClusterCenterGlob(GDB_ID.SEL, ptCen) Then Return False
-            ' Aggiorno regioni per nesting
-            UpdateNestRegions()
-            EnableReferenceRegion(False)
-            ' Verifico rotazione complessiva
-            EgtRotate(GDB_ID.SEL, ptCen, Vector3d.Z_AX(), dAngRotDeg, GDB_RT.GLOB)
-            If EgtVerifyPart(GDB_ID.SEL, CurrentMachine.bReducedCut) Then Return True
-            ' Provo rotazione parziale (dopo aver annullato la complessiva)
-            EgtRotate(GDB_ID.SEL, ptCen, Vector3d.Z_AX(), -dAngRotDeg, GDB_RT.GLOB)
-            Return EgtRotatePart(GDB_ID.SEL, CurrentMachine.bReducedCut, ptCen, dAngRotDeg)
-         Else
-            Return False
-         End If
+         Return RotatePartInsideBond(dAngRotDeg, GDB_ID.SEL)
       End If
    End Function
 
-   Private Function GetLockOnRotation( nPartId As Integer) As Boolean
+   Private Function GetLockOnRotation(nPartId As Integer) As Boolean
       ' Se singolo pezzo
       If nPartId <> GDB_ID.SEL Then
-         Return EgtExistsInfo( nPartId, INFO_PARTROT)
-      ' Altrimenti tutti i selezionati
+         Return EgtExistsInfo(nPartId, INFO_PARTROT)
+         ' Altrimenti tutti i selezionati
       Else
          Dim bLockedRot As Boolean = False
          Dim nId As Integer = EgtGetFirstSelectedObj()
          While nId <> GDB_ID.NULL
-            If EgtExistsInfo( nId, INFO_PARTROT) Then
+            If EgtExistsInfo(nId, INFO_PARTROT) Then
                bLockedRot = True
                Exit While
             End If
@@ -564,13 +640,13 @@ Public Class NestingTabVM
       Return True
    End Function
 
-   Friend Function ExitNesting( bChange As Boolean) As Boolean
+   Friend Function ExitNesting(bChange As Boolean) As Boolean
       If m_CsvImport_IsChecked Then
          m_CsvImportWindow.Close()
          m_CsvImportWindow = Nothing
       End If
       If bChange Then
-         OmagOFFICEMap.refVeinMatchPanelVM.SetVeinMatchIsChecked( False)
+         OmagOFFICEMap.refVeinMatchPanelVM.SetVeinMatchIsChecked(False)
          OmagOFFICEMap.refVeinMatchPanelVM.VeinMatchIsEnabled = False
       End If
       Return True
@@ -1341,22 +1417,22 @@ Public Class NestingTabVM
       If EgtGetSelectedObjCount() = 0 OrElse m_nPartPos <> PART_POS.OUT_TABLE Then Return
       ' Tolgo blocco rotazione sui pezzi selezionati
       Dim nId As Integer = EgtGetFirstSelectedObj()
-      While nId <> GDB_ID.NULL 
+      While nId <> GDB_ID.NULL
          ' Se rotazione bloccata, tolgo blocco e aggiorno info
-         If EgtExistsInfo( nId, INFO_PARTROT) Then
+         If EgtExistsInfo(nId, INFO_PARTROT) Then
             ' Rimuovo flag di rotazione bloccata
-            EgtRemoveInfo( nId, INFO_PARTROT)
+            EgtRemoveInfo(nId, INFO_PARTROT)
             ' Tolgo da info sul pezzo Codice
-            Dim nTextId As Integer = EgtGetFirstInGroup( EgtGetFirstNameInGroup( nId, NAME_REGION))
+            Dim nTextId As Integer = EgtGetFirstInGroup(EgtGetFirstNameInGroup(nId, NAME_REGION))
             While nTextId <> GDB_ID.NULL
-               If EgtGetType( nTextId) = GDB_TY.EXT_TEXT Then
+               If EgtGetType(nTextId) = GDB_TY.EXT_TEXT Then
                   Dim sText As String = ""
-                  EgtTextGetContent( nTextId, sText)
-                  sText = sText.Replace( "<br/>(X)", "")
-                  EgtModifyText( nTextId, sText)
+                  EgtTextGetContent(nTextId, sText)
+                  sText = sText.Replace("<br/>(X)", "")
+                  EgtModifyText(nTextId, sText)
                   Exit While
                End If
-               nTextId = EgtGetNext( nTextId)
+               nTextId = EgtGetNext(nTextId)
             End While
          End If
          ' Passo al successivo selezionato
@@ -1385,22 +1461,22 @@ Public Class NestingTabVM
       If EgtGetSelectedObjCount() = 0 OrElse m_nPartPos <> PART_POS.OUT_TABLE Then Return
       ' Metto blocco rotazione sui pezzi selezionati
       Dim nId As Integer = EgtGetFirstSelectedObj()
-      While nId <> GDB_ID.NULL 
+      While nId <> GDB_ID.NULL
          ' Se rotazione libera, applico blocco e aggiorno info
-         If Not EgtExistsInfo( nId, INFO_PARTROT) Then
+         If Not EgtExistsInfo(nId, INFO_PARTROT) Then
             ' Imposto flag di rotazione bloccata
-            EgtSetInfo( nId, INFO_PARTROT, 0)
+            EgtSetInfo(nId, INFO_PARTROT, 0)
             ' Inserisco in info sul pezzo Codice
-            Dim nTextId As Integer = EgtGetFirstInGroup( EgtGetFirstNameInGroup( nId, NAME_REGION))
+            Dim nTextId As Integer = EgtGetFirstInGroup(EgtGetFirstNameInGroup(nId, NAME_REGION))
             While nTextId <> GDB_ID.NULL
-               If EgtGetType( nTextId) = GDB_TY.EXT_TEXT Then
+               If EgtGetType(nTextId) = GDB_TY.EXT_TEXT Then
                   Dim sText As String = ""
-                  EgtTextGetContent( nTextId, sText)
+                  EgtTextGetContent(nTextId, sText)
                   sText &= "<br/>(X)"
-                  EgtModifyText( nTextId, sText)
+                  EgtModifyText(nTextId, sText)
                   Exit While
                End If
-               nTextId = EgtGetNext( nTextId)
+               nTextId = EgtGetNext(nTextId)
             End While
          End If
          ' Passo al successivo selezionato
@@ -1436,7 +1512,7 @@ Public Class NestingTabVM
       Dim bAlignMoved As Boolean = False
       Dim bSnapMoved As Boolean = False
       If m_bMagnetic Then
-         If Not GetLockOnRotation( GDB_ID.SEL) Then
+         If Not GetLockOnRotation(GDB_ID.SEL) Then
             EgtAlignPartOnCollision(GDB_ID.SEL, CurrentMachine.bReducedCut, bAlignMoved)
          End If
          If m_dSnapDist > EPS_SMALL Then
@@ -1480,7 +1556,7 @@ Public Class NestingTabVM
       Dim bAlignMoved As Boolean = False
       Dim bSnapMoved As Boolean = False
       If m_bMagnetic Then
-         If Not GetLockOnRotation( GDB_ID.SEL) Then
+         If Not GetLockOnRotation(GDB_ID.SEL) Then
             EgtAlignPartOnCollision(GDB_ID.SEL, CurrentMachine.bReducedCut, bAlignMoved)
          End If
          If m_dSnapDist > EPS_SMALL Then
@@ -1524,7 +1600,7 @@ Public Class NestingTabVM
       Dim bAlignMoved As Boolean = False
       Dim bSnapMoved As Boolean = False
       If m_bMagnetic Then
-         If Not GetLockOnRotation( GDB_ID.SEL) Then
+         If Not GetLockOnRotation(GDB_ID.SEL) Then
             EgtAlignPartOnCollision(GDB_ID.SEL, CurrentMachine.bReducedCut, bAlignMoved)
          End If
          If m_dSnapDist > EPS_SMALL Then
@@ -1568,7 +1644,7 @@ Public Class NestingTabVM
       Dim bAlignMoved As Boolean = False
       Dim bSnapMoved As Boolean = False
       If m_bMagnetic Then
-         If Not GetLockOnRotation( GDB_ID.SEL) Then
+         If Not GetLockOnRotation(GDB_ID.SEL) Then
             EgtAlignPartOnCollision(GDB_ID.SEL, CurrentMachine.bReducedCut, bAlignMoved)
          End If
          If m_dSnapDist > EPS_SMALL Then
@@ -1656,7 +1732,7 @@ Public Class NestingTabVM
       If CurrentMachine.bAutomatic And
          OmagOFFICEMap.refMainWindowVM.MainWindowM.AutoNestOption() Then
          AutomaticInsert()
-      ' altrimenti inserimento standard
+         ' altrimenti inserimento standard
       Else
          StandardInsert()
       End If
@@ -1949,44 +2025,44 @@ Public Class NestingTabVM
       ' Deseleziono eventuali altri
       If EgtGetNextSelectedObj() <> GDB_ID.NULL Then
          EgtDeselectAll()
-         EgtSelectObj( nPartId)
+         EgtSelectObj(nPartId)
          EgtDraw()
       End If
       ' Recupero dati del pezzo
-      Dim sCsvOrder As String = "" : EgtGetInfo( nPartId, INFO_CSV_ORD, sCsvOrder)
-      Dim sCsvList As String = "" : EgtGetInfo( nPartId, INFO_CSV_DIST, sCsvList)
-      Dim sCsvName As String = "" : EgtGetInfo( nPartId, INFO_CSV_PART, sCsvName)
+      Dim sCsvOrder As String = "" : EgtGetInfo(nPartId, INFO_CSV_ORD, sCsvOrder)
+      Dim sCsvList As String = "" : EgtGetInfo(nPartId, INFO_CSV_DIST, sCsvList)
+      Dim sCsvName As String = "" : EgtGetInfo(nPartId, INFO_CSV_PART, sCsvName)
       ' Avvio dialogo modifica
       Dim DlgCsvDataVM As New CompoCsvDataWindowVM()
       Dim DlgCsvDataV As New CompoCsvDataWindowV(Application.Current.MainWindow, DlgCsvDataVM)
-      DlgCsvDataVM.SetData( sCsvOrder, sCsvList, sCsvName)
+      DlgCsvDataVM.SetData(sCsvOrder, sCsvList, sCsvName)
       If DlgCsvDataV.ShowDialog() Then
          ' Recupero i nuovi dati
          Dim sNewOrder As String = ""
          Dim sNewList As String = ""
          Dim sNewName As String = ""
-         DlgCsvDataVM.GetData( sNewOrder, sNewList, sNewName)
+         DlgCsvDataVM.GetData(sNewOrder, sNewList, sNewName)
          ' Assegno i nuovi dati
-         EgtSetInfo( nPartId, INFO_CSV_ORD, sNewOrder)
-         EgtSetInfo( nPartId, INFO_CSV_DIST, sNewList)
-         EgtSetInfo( nPartId, INFO_CSV_PART, sNewName)
+         EgtSetInfo(nPartId, INFO_CSV_ORD, sNewOrder)
+         EgtSetInfo(nPartId, INFO_CSV_DIST, sNewList)
+         EgtSetInfo(nPartId, INFO_CSV_PART, sNewName)
          ' Se necessario, modifico la scritta
          If sNewName <> sCsvName Then
-            Dim nRegLayId As Integer = EgtGetFirstNameInGroup( nPartId, NAME_REGION)
+            Dim nRegLayId As Integer = EgtGetFirstNameInGroup(nPartId, NAME_REGION)
             Dim nTextId = EgtGetFirstInGroup(nRegLayId)
             While nTextId <> GDB_ID.NULL
-               If EgtGetType( nTextId) = GDB_TY.EXT_TEXT Then
+               If EgtGetType(nTextId) = GDB_TY.EXT_TEXT Then
                   Dim sText As String = String.Empty
-                  EgtTextGetContent( nTextId, sText)
-                  Dim nPos As Integer = sText.IndexOf( sCsvName)
+                  EgtTextGetContent(nTextId, sText)
+                  Dim nPos As Integer = sText.IndexOf(sCsvName)
                   Dim sNewText As String
-                  If nPos <0 Then
-                     sNewText= sNewName & "<br/>" & sText
+                  If nPos < 0 Then
+                     sNewText = sNewName & "<br/>" & sText
                   Else
-                     sNewText = sText.Remove( nPos, sCsvName.Length()).Insert( nPos, sNewName)
+                     sNewText = sText.Remove(nPos, sCsvName.Length()).Insert(nPos, sNewName)
                   End If
-                  EgtModifyText( nTextId, sNewText)
-                  VeinMatching.ModifyPartText( nPartId, sNewText)
+                  EgtModifyText(nTextId, sNewText)
+                  VeinMatching.ModifyPartText(nPartId, sNewText)
                   Exit While
                End If
                nTextId = EgtGetNext(nTextId)
@@ -2081,6 +2157,7 @@ Public Class NestingTabVM
       m_bDrag = m_bDrag AndAlso EgtUnProjectPoint(e.Location, m_ptPrev)
       m_bDragToStart = m_bDrag
       m_bVerify = m_bDrag AndAlso (Keyboard.Modifiers And ModifierKeys.Shift) > 0
+      m_bKeyLeftShiftPressed = m_bVerify
       m_vtTotMove = Vector3d.NULL()
    End Sub
 
@@ -2089,7 +2166,7 @@ Public Class NestingTabVM
       If Not m_bDrag Or m_bDragging Then Return
       ' Se primo movimento di drag, verifico di aver superato la soglia di movimento in pixel
       If m_bDragToStart Then
-         If Math.Abs(e.Location.X - m_locPrev.X) <m_nRestRadius And
+         If Math.Abs(e.Location.X - m_locPrev.X) < m_nRestRadius And
             Math.Abs(e.Location.Y - m_locPrev.Y) < m_nRestRadius Then
             Return
          End If
@@ -2115,12 +2192,12 @@ Public Class NestingTabVM
             OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_NESTPAGEUC + 7), MSG_TYPE.WARNING)
          End If
          ' Applico le lavorazioni al pezzo
-         Dim b3Curr As new BBox3d
-         EgtGetBBoxGlob( EgtGetFirstNameInGroup(nTestId,  NAME_REGION), BBFLAG, b3Curr)
-         if Not EstCalc.PreInsertOnePart( nTestId) Then Return
-         Dim b3Ins As new BBox3d
-         EgtGetBBoxGlob( EgtGetFirstNameInGroup( nTestId, NAME_REGION), BBFLAG, b3Ins)
-         Dim vtDiff As new Vector3d( b3Curr.Min().x - b3Ins.Min().x, b3Curr.Min().y - b3Ins.Min().y, 0)
+         Dim b3Curr As New BBox3d
+         EgtGetBBoxGlob(EgtGetFirstNameInGroup(nTestId, NAME_REGION), BBFLAG, b3Curr)
+         If Not EstCalc.PreInsertOnePart(nTestId) Then Return
+         Dim b3Ins As New BBox3d
+         EgtGetBBoxGlob(EgtGetFirstNameInGroup(nTestId, NAME_REGION), BBFLAG, b3Ins)
+         Dim vtDiff As New Vector3d(b3Curr.Min().x - b3Ins.Min().x, b3Curr.Min().y - b3Ins.Min().y, 0)
          EgtMove(nMoveId, vtDiff)
 
          '---------------------- COUNTER PART ----------------------
@@ -2136,7 +2213,7 @@ Public Class NestingTabVM
          '---------------------- COUNTER PART ----------------------
 
          ' Gestione VeinMatching
-         VeinMatching.OnInsertPartInRaw( nMoveId)
+         VeinMatching.OnInsertPartInRaw(nMoveId)
          ' Imposto stato
          m_bVerify = True
          m_bFromParking = True
@@ -2146,46 +2223,108 @@ Public Class NestingTabVM
       ' Ricavo il punto corrente in coordinate mondo
       Dim ptCurr As Point3d
       EgtUnProjectPoint(e.Location, ptCurr)
-      ' Ricavo il vettore di movimento
-      Dim vtMove As Vector3d = ptCurr - m_ptPrev
-      ' Muovo i pezzi selezionati di quanto possibile
-      If vtMove.SqLen() > EPS_SMALL * EPS_SMALL Then
-         ' Se movimento con sola verifica finale
-         If m_bVerify Then
-            EgtMove(nMoveId, vtMove)
-            m_vtTotMove += vtMove
-         ' altrimenti caso con verifica durante il movimento
-         Else
-            ' Aggiorno regioni per nesting
-            UpdateNestRegions()
-            EnableReferenceRegion(False)
-            ' muovo il pezzo
-            EgtMovePart(nMoveId, CurrentMachine.bReducedCut, vtMove)
-            EgtSaveCollInfo()
-            ' se movimento risultante nullo, provo con movimento tangente
-            Dim bTgMoved As Boolean = False
-            If vtMove.IsSmall() Then
-               ' riprovo con movimento tangente
-               Dim vtTgMove As Vector3d = ptCurr - m_ptPrev
-               EgtTgMovePartOnCollision(nMoveId, CurrentMachine.bReducedCut, vtTgMove)
-               bTgMoved = (Not vtTgMove.IsSmall())
-            End If
-            ' se abilitato magnetico (allineamento + snap), lo provo
-            Dim bAlignMoved As Boolean = False
-            Dim bSnapMoved As Boolean = False
-            If m_bMagnetic Then
-               If Not GetLockOnRotation( nMoveId) Then
-                  EgtAlignPartOnCollision(nMoveId, CurrentMachine.bReducedCut, bAlignMoved)
-               End If
-               If m_dSnapDist > EPS_SMALL Then
-                  EgtRestoreCollInfo()
-                  EgtMovePartToSnapPointOnCollision(nMoveId, CurrentMachine.bReducedCut, m_dSnapDist, bSnapMoved)
-               End If
-            End If
-            EstCalc.ResetOrderMachiningFlag()
+
+      ' la rotazione è attivabile solo se premuto il tasto Ctrl (e non sono in parheggio)
+      m_bKeyCtrlPressed = m_bDrag AndAlso (Keyboard.Modifiers And ModifierKeys.Control) > 0
+
+      '-------------Inizio ROTAZIONE ----------------
+      If m_bKeyCtrlPressed AndAlso (Not m_bFromParking OrElse m_bKeyLeftShiftPressed) Then
+         ' Calcolo il centro di rotazione come centro del cluster
+         Dim ptCen As Point3d
+         If Not EgtGetPartPartClusterCenterGlob(nMoveId, ptCen) Then Return
+         ' definisco il vettore dal centro del pezzo alla posizione del cursore
+         Dim vtCurr As Vector3d = ptCurr - ptCen
+         Dim dLen, dHAng, dVAng As Double
+         ' recupero l'angolo orizzontale del vettore
+         vtCurr.ToSpherical(dLen, dHAng, dVAng)
+         If Not m_bStartRot Then
+            m_dAngTotal = 0
+            ' notifico una rotazione
+            m_bStartRot = True
+            m_dStartAng = dVAng
          End If
-         EgtDraw()
-         ' Eventuale notifica al VeinMatching
+         Dim dDeltaAng As Double = dVAng - m_dStartAng
+         ' gestione del passaggio da 0° → 360° evitando mantenendo la visualizzazione fluida
+         If Math.Abs(dDeltaAng) > 90 Then
+            If m_dStartAng < 180 And dVAng > 180 Then
+               dDeltaAng = dVAng - 360 - m_dStartAng
+            ElseIf m_dStartAng > 180 And dVAng < 180 Then
+               dDeltaAng = dVAng - m_dStartAng + 360
+            End If
+         End If
+         ' Rotazione del pezzo attorno al suo centro
+         If Math.Abs(dDeltaAng) > EPS_ANG_SMALL Then
+            ' se il tasto Shift è premuto (disabilitato il controllo collisioni durante il Drag) 
+            If m_bKeyLeftShiftPressed Then
+               EgtRotate(nMoveId, ptCen, Vector3d.Z_AX(), dDeltaAng, GDB_RT.GLOB)
+               m_dAngTotal += dDeltaAng
+            Else
+               ' esegue la rotazione fino ad incontrare un altro pezzo
+               RotatePartInsideBond(dDeltaAng, nMoveId)
+               EstCalc.ResetOrderMachiningFlag()
+               ' Eventuale notifica al VeinMatching
+               Dim nId As Integer = EgtGetFirstSelectedObj()
+               While nId <> GDB_ID.NULL
+                  VeinMatching.OnMovePartInRaw(nId)
+                  nId = EgtGetNextSelectedObj()
+               End While
+            End If
+            m_dStartAng = dVAng
+         End If
+         '-------------Fine ROTAZIONE ----------------
+
+      Else
+         ' -------------Inizio TRASLAZIONE ---------------
+         ' Ricavo il vettore di movimento
+         Dim vtMove As Vector3d = ptCurr - m_ptPrev
+         ' Muovo i pezzi selezionati di quanto possibile
+         If vtMove.SqLen() > EPS_SMALL * EPS_SMALL Then
+            ' notifico una traslazione
+            If Not m_bStartMove Then
+               m_bStartMove = True
+            End If
+
+            ' Se movimento con sola verifica finale (disabilitato il controllo collisioni durante il Drag)
+            If m_bVerify Then
+               EgtMove(nMoveId, vtMove)
+               m_vtTotMove += vtMove
+               ' altrimenti caso con verifica durante il movimento
+            Else
+               ' Aggiorno regioni per nesting
+               UpdateNestRegions()
+               EnableReferenceRegion(False)
+               ' muovo il pezzo
+               EgtMovePart(nMoveId, CurrentMachine.bReducedCut, vtMove)
+               EgtSaveCollInfo()
+               ' se movimento risultante nullo, provo con movimento tangente
+               Dim bTgMoved As Boolean = False
+               If vtMove.IsSmall() Then
+                  ' riprovo con movimento tangente
+                  Dim vtTgMove As Vector3d = ptCurr - m_ptPrev
+                  EgtTgMovePartOnCollision(nMoveId, CurrentMachine.bReducedCut, vtTgMove)
+                  bTgMoved = (Not vtTgMove.IsSmall())
+               End If
+               ' se abilitato magnetico (allineamento + snap), lo provo
+               Dim bAlignMoved As Boolean = False
+               Dim bSnapMoved As Boolean = False
+               If m_bMagnetic Then
+                  If Not GetLockOnRotation(nMoveId) Then
+                     EgtAlignPartOnCollision(nMoveId, CurrentMachine.bReducedCut, bAlignMoved)
+                  End If
+                  If m_dSnapDist > EPS_SMALL Then
+                     EgtRestoreCollInfo()
+                     EgtMovePartToSnapPointOnCollision(nMoveId, CurrentMachine.bReducedCut, m_dSnapDist, bSnapMoved)
+                  End If
+               End If
+               EstCalc.ResetOrderMachiningFlag()
+            End If
+            ' -------------Fine TRASLAZIONE ---------------
+         End If
+      End If
+
+      EgtDraw()
+      ' Eventuale notifica al VeinMatching
+      If m_bStartMove OrElse m_bStartRot Then
          If nMoveId = GDB_ID.SEL Then
             Dim nId As Integer = EgtGetFirstSelectedObj()
             While nId <> GDB_ID.NULL
@@ -2225,48 +2364,31 @@ Public Class NestingTabVM
 
       ' Se eseguito drag
       If Not m_bDragToStart Then
-         ' Se movimento con sola verifica finale
-         If m_bVerify Then
-            ' Determino cosa verificare
-            Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
-            ' Aggiorno regioni per nesting
-            UpdateNestRegions()
-            EnableReferenceRegion(False)
-            ' Eseguo verifica
-            If VerifyTrfData(nMoveId) And EgtVerifyPart(nMoveId, CurrentMachine.bReducedCut) Then
-               EstCalc.ResetOrderMachiningFlag()
-               ' Non superata riporto alla posizione iniziale
+         ' Se movimento con sola verifica finale ----- TRASLAZIONE
+         If Not m_bStartRot And m_bStartMove Then
+            VerifyMove()
+            ' Se movimento con sola verifica finale ----- TRASLAZIONE + ROTAZIONE
+         ElseIf m_bStartRot And m_bStartMove Then
+            If Not m_bFromParking Then
+               VerifyRot()
             Else
-               If m_bFromParking Then
-                  OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
-                  PreRemoveOnePart(nMoveId)
-                  VeinMatching.OnRemovePartFromRaw(nMoveId)
-               Else
-                  EgtMove(nMoveId, -m_vtTotMove)
-                  ' Eventuale notifica al VeinMatching
-                  If nMoveId = GDB_ID.SEL Then
-                     Dim nId As Integer = EgtGetFirstSelectedObj()
-                     While nId <> GDB_ID.NULL
-                        VeinMatching.OnMovePartInRaw(nId)
-                        nId = EgtGetNextSelectedObj()
-                     End While
-                  Else
-                     VeinMatching.OnMovePartInRaw(nMoveId)
-                  End If
-               End If
-               '---------------------- COUNTER PART ----------------------
-               Dim sRefGroup As String = String.Empty
-               If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
-                  ' accendo il layer che contiene il contatore (spento in fase di Drag)
-                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
-                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
-                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
-                  CountPartInFamily(sRefGroup)
-               End If
-               '---------------------- COUNTER PART ----------------------
+               ' forzo il reset delle info di rotazione
+               m_dStartAng = 0
+               m_dAngTotal = 0
+               m_bStartRot = False
+            End If
+            VerifyMove()
+            ' verifico se la posizione finale della rotazione è corretta ----- ROTAZIONE
+         ElseIf m_bStartRot And Not m_bStartMove Then
+            If m_bFromParking Then
+               VerifyMove()
+               ' forzo il reset delle info di rotazione
+               m_dStartAng = 0
+               m_dAngTotal = 0
+               m_bStartRot = False
+            Else
+               VerifyRot()
             End If
-            m_bFromParking = False
-            ' altrimenti caso con verifica durante il movimento
          Else
             ' Basta reset alla fine
          End If
@@ -2306,6 +2428,7 @@ Public Class NestingTabVM
          VeinMatching.OnDeselectPart(m_nIdToDesel)
       End If
       ' Reset
+      GetFamilyGroupInPark()
       m_bDrag = False
       m_nIdToSel = GDB_ID.NULL
       m_nIdToDesel = GDB_ID.NULL
@@ -2320,7 +2443,7 @@ Public Class NestingTabVM
       ' Con CANC cancello i pezzi selezionati
       If e.KeyData = System.Windows.Forms.Keys.Delete Then
          RemovePart()
-      ' Con INS eseguo inserimento dei pezzi selezionati in VeinMatching
+         ' Con INS eseguo inserimento dei pezzi selezionati in VeinMatching
       ElseIf e.KeyData = System.Windows.Forms.Keys.Insert Then
          ' Vettore dei pezzi selezionati (l'inserimento di un pezzo in VM cancella la selezione)
          Dim vSel As New List(Of Integer)

OptionPanel/RawPartTab/RawPartTabV.xaml

@@ -176,7 +176,25 @@
 
    </GroupBox>
 
-   <Button Content="{Binding ConfirmPhotoMsg}"
+    <!-- Definizione della Grid per Punti Per il Registration -->
+    <GroupBox Header="{Binding PointsRegMsg}" Margin="0,0,0,5"
+             Visibility="{Binding PointsRegVisibility}">
+        <StackPanel>
+            <UniformGrid Columns="3">
+                <ToggleButton Content="{Binding AddMsg}"
+                          IsChecked="{Binding AddPointReg}"
+                          Style="{StaticResource OptionPanel_ToggleButton}"/>
+                <ToggleButton Content="{Binding ModMsg}"
+                          IsChecked="{Binding ModPointReg}"
+                          Style="{StaticResource OptionPanel_ToggleButton}"/>
+                <ToggleButton Content="{Binding RemoveMsg}"
+                          IsChecked="{Binding RemovePointReg}"
+                          Style="{StaticResource OptionPanel_ToggleButton}"/>
+            </UniformGrid>
+        </StackPanel>
+    </GroupBox>
+
+    <Button Content="{Binding ConfirmPhotoMsg}"
            Command="{Binding ConfirmPhotoCommand}"
            Visibility="{Binding ConfirmPhotoVisibility}"
            Style="{StaticResource OptionPanel_TextButton}"

OptionPanel/RawPartTab/RawPartTabVM.vb

@@ -42,6 +42,17 @@ Public Class RawPartTabVM
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
 
+   ' Layer per crocette dei punti REG
+   Private m_nRegGroupId As Integer = GDB_ID.NULL
+   ' Numero di spot inseriti nel grezzo corrente
+   Private m_nCountSpot As Integer = 0
+   ' Gruppo Spot attualmente selezionato
+   Private m_nCurrSpotRegId As Integer = GDB_ID.NULL
+   Private Const COUNTSPOT As String = "CountSpot"
+   Private Const REG As String = "Reg"
+   Private Const SPOTREG_ As String = "SpotReg_"
+   Private Const RADSPOT As Double = 20
+
    ' Costante minima dimensione del grezzo
    Private Const MIN_RAW_DIM As Double = 10
    ' Costante distanza di sicurezza del grezzo dal bordo
@@ -343,9 +354,11 @@ Public Class RawPartTabVM
          Dim dHeight As Double = 0
          If StringToLen(value, dHeight) And dHeight > -EPS_ZERO Then
             OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+            Dim dPrevHeight As Double = m_dHeight
             m_dHeight = dHeight
             UpdateRawPartHeight()
             UpdateTabState()
+            MoveAllSpotRegistration(New Vector3d(0, 0, m_dHeight - dPrevHeight))
             EstCalc.SetSlabHeight(dHeight)
             OmagOFFICEMap.refMachGroupPanelVM.SelectedMachGroup.NotifyPropertyChanged("MachGroupToolTip")
          Else
@@ -741,6 +754,73 @@ Public Class RawPartTabVM
       End Set
    End Property
 
+   '-------------------- REGISTRATION '--------------------
+   Private m_AddPointReg As Boolean
+   Public Property AddPointReg As Boolean
+      Get
+         Return m_AddPointReg
+      End Get
+      Set(value As Boolean)
+         If value <> m_AddPointReg Then
+            If value Then
+               PhotoWithMouse = False
+               m_bDrag = False
+            End If
+            m_AddPointReg = value
+            NotifyPropertyChanged("AddPointReg")
+            m_ModPointReg = False
+            NotifyPropertyChanged("ModPointReg")
+            m_RemovePointReg = False
+            NotifyPropertyChanged("RemovePointReg")
+         End If
+      End Set
+   End Property
+
+   Private m_ModPointReg As Boolean
+   Public Property ModPointReg As Boolean
+      Get
+         Return m_ModPointReg
+      End Get
+      Set(value As Boolean)
+         If value <> m_ModPointReg Then
+            EgtDeselectAll()
+            EgtResetMark(m_nCurrSpotRegId)
+            EgtDraw()
+            If value Then
+               PhotoWithMouse = False
+            End If
+            m_ModPointReg = value
+            NotifyPropertyChanged("ModPointReg")
+            m_AddPointReg = False
+            NotifyPropertyChanged("AddPointReg")
+            m_RemovePointReg = False
+            NotifyPropertyChanged("RemovePointReg")
+         End If
+      End Set
+   End Property
+
+   Private m_RemovePointReg As Boolean
+   Public Property RemovePointReg As Boolean
+      Get
+         Return m_RemovePointReg
+      End Get
+      Set(value As Boolean)
+         If value <> m_RemovePointReg Then
+            If value Then
+               PhotoWithMouse = False
+               m_bDrag = False
+            End If
+            m_RemovePointReg = value
+            NotifyPropertyChanged("RemovePointReg")
+            m_AddPointReg = False
+            NotifyPropertyChanged("AddPointReg")
+            m_ModPointReg = False
+            NotifyPropertyChanged("ModPointReg")
+         End If
+      End Set
+   End Property
+   '-------------------- REGISTRATION '--------------------
+
    Private m_PointsVisibility As Visibility
    Public Property PointsVisibility As Visibility
       Get
@@ -943,6 +1023,12 @@ Public Class RawPartTabVM
       End Get
    End Property
 
+   Public ReadOnly Property ModMsg As String
+      Get
+         Return "Modifica"
+      End Get
+   End Property
+
    Public ReadOnly Property NewMsg As String
       Get
          Return EgtMsg(MSG_RAWPARTPAGEUC + 11)
@@ -967,6 +1053,12 @@ Public Class RawPartTabVM
       End Get
    End Property
 
+   Public ReadOnly Property PointsRegMsg As String
+      Get
+         Return "Registration"
+      End Get
+   End Property
+
 #End Region    ' Messages
 
 #Region "ToolTip"
@@ -1009,8 +1101,8 @@ Public Class RawPartTabVM
    Friend Function InitRawPart() As Boolean
       EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
       ' Se abilitati, visualizzo bottone per dati lastra
-      Dim bSlabId As Boolean = ( GetMainPrivateProfileInt( S_RAWPART, K_SLABID, 0) <> 0)
-      SlabIdVisibility = If( bSlabId, Windows.Visibility.Visible, Windows.Visibility.Hidden)
+      Dim bSlabId As Boolean = (GetMainPrivateProfileInt(S_RAWPART, K_SLABID, 0) <> 0)
+      SlabIdVisibility = If(bSlabId, Windows.Visibility.Visible, Windows.Visibility.Hidden)
       ' Se disponibile, imposto possibilità di contorno da foto
       If EstPhoto.GetContour() = GDB_ID.NULL Then
          If m_TypeList.Count = 3 Then m_TypeList.RemoveAt(2)
@@ -1092,10 +1184,25 @@ Public Class RawPartTabVM
          RecalcRawPart(True)
       End If
       ' Abilitazione eventuale bottone per dati slab
-      SlabIdIsEnabled = ( EstCalc.GetRawId() <> GDB_ID.NULL)
+      SlabIdIsEnabled = (EstCalc.GetRawId() <> GDB_ID.NULL)
       ' Creo layer temporaneo per crocette
       m_nTempLay = EgtCreateGroup(GDB_ID.ROOT)
       EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
+
+      ' Veroifico se esiste il gruppo "REG"
+      Dim nIdReg As Integer = EgtGetFirstNameInGroup(EgtGetParent(EstCalc.GetRawId()), "Reg")
+      If nIdReg <> GDB_ID.NULL Then
+         m_nRegGroupId = nIdReg
+         EgtGetInfo(m_nRegGroupId, COUNTSPOT, m_nCountSpot)
+         ' Lo rendo visibile
+         EgtSetStatus(m_nRegGroupId, GDB_ST.ON_)
+      Else
+         ' Creo layer per definire i punti di REG
+         m_nRegGroupId = EgtCreateGroup(EgtGetParent(EstCalc.GetRawId()))
+         EgtSetName(m_nRegGroupId, REG)
+         m_nCountSpot = 0
+      End If
+
       ' Determino modalità di definizione
       OutlineIsChecked = True
       If EgtExistsInfo(EstCalc.GetRawId(), KEY_RAWBYPOINTS) Then
@@ -1177,6 +1284,8 @@ Public Class RawPartTabVM
       WriteMainPrivateProfileString(S_RAWPART, K_RAWOFFSX, DoubleToString(m_dOffsetX, 2))
       WriteMainPrivateProfileString(S_RAWPART, K_RAWOFFSY, DoubleToString(m_dOffsetY, 2))
       WriteMainPrivateProfileString(S_RAWPART, K_RAWKERF, DoubleToString(m_dKerf, 2))
+      ' Nascondo il gruppo dei punti Reg
+      EgtSetStatus(m_nRegGroupId, GDB_ST.OFF)
       ' Se ci sono pezzi nel grezzo
       If EgtGetFirstPartInRawPart(EstCalc.GetRawId()) <> GDB_ID.NULL Then
          ' Cancello tutte le lavorazioni
@@ -1310,7 +1419,7 @@ Public Class RawPartTabVM
          AdjustRawPartPosition()
       End If
       ' Abilitazione eventuale bottone per dati slab
-      SlabIdIsEnabled = ( EstCalc.GetRawId() <> GDB_ID.NULL)
+      SlabIdIsEnabled = (EstCalc.GetRawId() <> GDB_ID.NULL)
       ' Aggiorno visualizzazione
       EgtDraw()
    End Sub
@@ -1374,7 +1483,6 @@ Public Class RawPartTabVM
          nInvert = -1
       End If
       Dim dOffset As Double = (-m_dKerf - m_PrecKerf) * nInvert
-      EgtSaveFile("c:\EgtData\OmagOFFICE\Temp\Error.nge", NGE.TEXT)
       Dim nCount As Integer = 0
       Dim bOK As Boolean = EgtOffsetCurve(nKerfId, dOffset, OFF_TYPE.EXTEND)
       EgtSetColor(nKerfId, m_KerfCol)
@@ -1413,7 +1521,7 @@ Public Class RawPartTabVM
       If EstCalc.GetRawId() = GDB_ID.NULL Then
          RecalcRawPart(True)
          Return
-      ' se da cancellare
+         ' se da cancellare
       ElseIf m_dHeight < EPS_SMALL Then
          ' Se ci sono pezzi
          If EgtGetFirstPartInRawPart(EstCalc.GetRawId()) <> GDB_ID.NULL Then
@@ -1434,7 +1542,7 @@ Public Class RawPartTabVM
          End If
          ' Elimino il grezzo
          EgtRemoveRawPart(EstCalc.GetRawId())
-      ' altrimenti da aggiornare
+         ' altrimenti da aggiornare
       Else
          ' Salvo vecchia altezza
          Dim dOldHeight As Double = EstCalc.GetRawHeight()
@@ -1468,7 +1576,7 @@ Public Class RawPartTabVM
          EstPhoto.UpdateContour()
       End If
       ' Abilitazione eventuale bottone per dati slab
-      SlabIdIsEnabled = ( EstCalc.GetRawId() <> GDB_ID.NULL)
+      SlabIdIsEnabled = (EstCalc.GetRawId() <> GDB_ID.NULL)
       ' Aggiorno visualizzazione
       EgtDraw()
    End Sub
@@ -1576,6 +1684,10 @@ Public Class RawPartTabVM
          ' Muovo eventuali cerchietti alle estremità della curva di contorno
          MoveCircles(vtMove)
       End If
+      ' Muovo eventuali punti SpotReg
+      If m_nRegGroupId <> GDB_ID.NULL Then
+         MoveAllSpotRegistration(vtMove)
+      End If
       ' Incremento opportunamente l'offset della fotografia
       Dim dPhotoOffsetX As Double = m_dPhotoOffsetX + vtMove.x
       Dim dPhotoOffsetY As Double = m_dPhotoOffsetY + vtMove.y
@@ -1831,6 +1943,106 @@ Public Class RawPartTabVM
       Return True
    End Function
 
+   Private Function MoveSpotRegistration(nIdGroup As Integer, vtMove As Vector3d) As Boolean
+      If nIdGroup = GDB_ID.NULL Then Return False
+      ' Non ci deve essere movimento in Z
+      vtMove.z = 0
+      ' Recupero il cercio di riferimento
+      Dim nArcId As Integer = EgtGetFirstInGroup(nIdGroup)
+      Dim b3Crv As New BBox3d
+      EgtGetBBoxGlob(nArcId, GDB_BB.STANDARD, b3Crv)
+      b3Crv.Move(vtMove)
+      If b3Crv.Min().x < m_ptTableMin.x + 10 * EPS_SMALL Then
+         vtMove.x += m_ptTableMin.x + 10 * EPS_SMALL - b3Crv.Min().x
+      ElseIf b3Crv.Max().x > m_ptTableMin.x + m_dTableLength + 10 * EPS_SMALL Then
+         vtMove.x += m_ptTableMin.x + m_dTableLength - 10 * EPS_SMALL - b3Crv.Max().x
+      End If
+      If b3Crv.Min().y < m_ptTableMin.y + 10 * EPS_SMALL Then
+         vtMove.y += m_ptTableMin.y + 10 * EPS_SMALL - b3Crv.Min().y
+      ElseIf b3Crv.Max().y > m_ptTableMin.y + m_dTableWidth + 10 * EPS_SMALL Then
+         vtMove.y += m_ptTableMin.y + m_dTableWidth - 10 * EPS_SMALL - b3Crv.Max().y
+      End If
+      ' muovo il gruppo
+      EgtMove(nIdGroup, vtMove)
+      EgtDraw()
+      Return True
+   End Function
+
+   Private Sub MoveAllSpotRegistration(vtMove As Vector3d)
+      Dim nId As Integer = EgtGetFirstInGroup(m_nRegGroupId)
+      While nId <> GDB_ID.NULL
+         EgtMove(nId, vtMove)
+         nId = EgtGetNext(nId)
+      End While
+      EgtDraw()
+   End Sub
+
+   Private Function CreateSpotRegistration(nLayerIdReg As Integer, ptP As Point3d, nIndexSpot As Integer) As Boolean
+      ' creo uno specifico layer per ogni spot (definito da una croce inscritta in un cerchio)
+      Dim nIdSpotLay As Integer = EgtCreateGroup(nLayerIdReg)
+      ' Aggiungo cerchio
+      Dim nCircId As Integer = EgtCreateCircle(nIdSpotLay, ptP, RADSPOT)
+      ' Inserisco una croce all'interno del 
+      Dim nLineVId As Integer = EgtCreateLinePVL(nIdSpotLay, ptP, Vector3d.Y_AX, RADSPOT)
+      EgtExtendCurveStartByLen(nLineVId, RADSPOT)
+      Dim nLineHId As Integer = EgtCreateLinePVL(nIdSpotLay, ptP, Vector3d.X_AX, RADSPOT)
+      EgtExtendCurveStartByLen(nLineHId, RADSPOT)
+      Dim nTextId As Integer = EgtCreateText(nIdSpotLay, ptP + New Vector3d(1, 1, 0), nIndexSpot.ToString, 10)
+      ' coloro gli oggetti appena creati ed assegno il nome
+      Dim bOk As Boolean = EgtSetColor(nCircId, New Color3d(0, 0, 0))
+      bOk = bOk And EgtSetName(nCircId, SPOTREG_ & "Arc")
+      bOk = bOk And EgtSetColor(nLineVId, New Color3d(0, 0, 0))
+      bOk = bOk And EgtSetName(nLineVId, SPOTREG_ & "LineV")
+      bOk = bOk And EgtSetColor(nLineHId, New Color3d(0, 0, 0))
+      bOk = bOk And EgtSetName(nLineHId, SPOTREG_ & "LineH")
+      bOk = bOk And EgtSetColor(nTextId, New Color3d(255, 0, 0))
+      bOk = bOk And EgtSetName(nTextId, SPOTREG_ & "Text")
+      ' assegno il nome del gruppo corrente
+      bOk = bOk And EgtSetName(nIdSpotLay, SPOTREG_ & nIndexSpot.ToString)
+      If bOk Then
+         ' Aggiorno il contatore degli Spot
+         EgtSetInfo(nLayerIdReg, COUNTSPOT, nIndexSpot)
+         m_nCountSpot = nIndexSpot
+      End If
+      Return bOk
+   End Function
+
+   Private Function RemoveSpotRegistration(nSpotRegId As Integer) As Boolean
+      Dim nIndSpotReg As Integer = GetIndexGroupSpotReg(nSpotRegId)
+      If Not EgtErase(nSpotRegId) Then Return False
+      ' faccio scorrere tutti i gruppi ed eventualmente li rinomino
+      Dim n_IdSR As Integer = EgtGetFirstInGroup(m_nRegGroupId)
+      m_nCountSpot -= 1
+      EgtSetInfo(m_nRegGroupId, COUNTSPOT, m_nCountSpot)
+      While n_IdSR <> GDB_ID.NULL
+         Dim nCurrIndSpotReg As Integer = GetIndexGroupSpotReg(n_IdSR)
+         If nCurrIndSpotReg > nIndSpotReg Then
+            ' Recupero il testo
+            Dim nIdtext As Integer = EgtGetFirstNameInGroup(n_IdSR, SPOTREG_ & "Text")
+            nCurrIndSpotReg -= 1
+            EgtModifyText(nIdtext, nCurrIndSpotReg.ToString)
+            EgtSetName(n_IdSR, SPOTREG_ & nCurrIndSpotReg.ToString)
+         End If
+         n_IdSR = EgtGetNext(n_IdSR)
+      End While
+      EgtDraw()
+      Return True
+   End Function
+
+   Private Function GetIndexGroupSpotReg(nSpotRegId As Integer) As Integer
+      Dim sNameParent As String = String.Empty
+      EgtGetName(nSpotRegId, sNameParent)
+      ' Ricavo l'indice dal nome
+      Dim sItems As String() = sNameParent.Split("_"c)
+      Dim nCurrIndex As Integer = 0
+      If sItems.Count = 2 Then
+         If Not Integer.TryParse(sItems(1), nCurrIndex) Then
+            nCurrIndex = -1
+         End If
+      End If
+      Return nCurrIndex
+   End Function
+
    Private Function ValidateCurrMachMatThick() As Boolean
       ' Verifico che le lavorazioni correnti siano compatibili con materiale e spessore
       ' Lama
@@ -1945,32 +2157,32 @@ Public Class RawPartTabVM
    End Property
 
    Public Sub SlabId(ByVal param As Object)
-      Dim nRawId As Integer =  EstCalc.GetRawId()
+      Dim nRawId As Integer = EstCalc.GetRawId()
       If nRawId = GDB_ID.NULL Then Return
       ' Finestra input dati
       Dim DlgSlabIdVM As New SlabIdWindowVM()
       Dim DlgSlabIdV As New SlabIdWindowV(Application.Current.MainWindow, DlgSlabIdVM)
       ' Recupero eventuali vecchi dati della lastra
       Dim sBlockName As String = "" : Dim sSlabNbr As String = ""
-      EgtGetInfo( nRawId, INFO_RAW_BLOCK, sBlockName)
-      EgtGetInfo( nRawId, INFO_RAW_SLABNBR, sSlabNbr)
-      DlgSlabIdVM.SetData( sBlockName, sSlabNbr)
+      EgtGetInfo(nRawId, INFO_RAW_BLOCK, sBlockName)
+      EgtGetInfo(nRawId, INFO_RAW_SLABNBR, sSlabNbr)
+      DlgSlabIdVM.SetData(sBlockName, sSlabNbr)
       ' Visualizzo finestra richiesta dati
       If DlgSlabIdV.ShowDialog() Then
-         DlgSlabIdVM.GetData( sBlockName, sSlabNbr)
+         DlgSlabIdVM.GetData(sBlockName, sSlabNbr)
          ' Assegno info
-         EgtSetInfo( nRawId, INFO_RAW_BLOCK, sBlockName)
-         EgtSetInfo( nRawId, INFO_RAW_SLABNBR, sSlabNbr)
+         EgtSetInfo(nRawId, INFO_RAW_BLOCK, sBlockName)
+         EgtSetInfo(nRawId, INFO_RAW_SLABNBR, sSlabNbr)
          ' Aggiorno nome lastra
-         If Not String.IsNullOrWhiteSpace( sBlockName) And Not String.IsNullOrWhiteSpace( sBlockName) Then
+         If Not String.IsNullOrWhiteSpace(sBlockName) And Not String.IsNullOrWhiteSpace(sBlockName) Then
             Dim sSlabName = sBlockName & "-" & sSlabNbr
-            EstCalc.SetSlabName( sSlabName)
+            EstCalc.SetSlabName(sSlabName)
             ' notifico il MachGroup Corrente
             OmagOFFICEMap.refMachGroupPanelVM.SelectedMachGroup.NotifyPropertyChanged("MachGroupToolTip")
          End If
          ' Cancello vecchio BarCode e se definito inserisco nuovo
          Dim sBarCode As String = sBlockName & " - " & sSlabNbr
-         ShowBarCode( nRawId, sBarCode)
+         ShowBarCode(nRawId, sBarCode)
          ' Aggiorno visualizzazione
          EgtDraw()
       End If
@@ -2141,7 +2353,7 @@ Public Class RawPartTabVM
       EstCalc.SetSlabHeight(m_dHeight)
       ' Visualizzo eventuale codice
       Dim sBarCode As String = sBlockCode & " - " & sSlabCode
-      ShowBarCode( EstCalc.GetRawId(), sBarCode)
+      ShowBarCode(EstCalc.GetRawId(), sBarCode)
       ' notifico il MachGroup Corrente
       OmagOFFICEMap.refMachGroupPanelVM.SelectedMachGroup.NotifyPropertyChanged("MachGroupToolTip")
       ' Carico contorno
@@ -2227,6 +2439,53 @@ Public Class RawPartTabVM
                m_dDragPar = -1
                Exit While
             End If
+            ' ---------- SELEZIONE SpotReg ---------- 
+         ElseIf m_AddPointReg Then
+            ' Acquisisco punto da disegno
+            EgtUnProjectPoint(e.Location, m_ptPrev)
+            Dim ptRawMax As Point3d = GetRawPtMax()
+            m_ptPrev.z = ptRawMax.z
+            ' Inserisco un nuovo punto registrazione
+            CreateSpotRegistration(m_nRegGroupId, m_ptPrev, m_nCountSpot + 1)
+            EgtDraw()
+            ' disattivo il comando di inserimento
+            m_AddPointReg = False
+            NotifyPropertyChanged("AddPointReg")
+            Return
+         ElseIf m_ModPointReg Then
+            If sName.StartsWith(SPOTREG_) Then
+               EgtDeselectAll()
+               EgtResetMark(m_nCurrSpotRegId)
+               ' recupero recupero il centro della prima curva
+               Dim nArcId As Integer = EgtGetFirstInGroup(nSelId)
+               Dim nIdParent As Integer = EgtGetParent(nSelId)
+               EgtSelectGroupObjs(nIdParent)
+               EgtSetMark(nIdParent)
+               EgtDraw()
+               ' Acquisisco punto da disegno
+               EgtUnProjectPoint(e.Location, m_ptPrev)
+               m_bDrag = True
+               m_nDragEnt = nIdParent
+               ' Salvo l'Id del punto SpotReg da spostare
+               m_nCurrSpotRegId = nIdParent
+               ' esco dal ciclo 
+               Return
+            End If
+         ElseIf m_RemovePointReg Then
+            If sName.StartsWith(SPOTREG_) Then
+               ' recupero recupero il centro della prima curva
+               Dim nArcId As Integer = EgtGetFirstInGroup(nSelId)
+               Dim nIdParent As Integer = EgtGetParent(nSelId)
+               RemoveSpotRegistration(nIdParent)
+               EgtDraw()
+               EgtErase(nIdParent)
+               m_RemovePointReg = False
+               NotifyPropertyChanged("RemovePointReg")
+
+               ' esco dal ciclo 
+               Return
+            End If
+            ' ---------- SELEZIONE SpotReg ---------- 
          ElseIf sName = NAME_RAW_SOLID Then
             m_bDrag = EgtUnProjectPoint(e.Location, m_ptPrev)
             m_nDragEnt = -1
@@ -2377,6 +2636,8 @@ Public Class RawPartTabVM
       ' Eseguo modifica
       If m_PhotoWithMouse Then
          ModifyPhoto(ptCurr)
+      ElseIf m_ModPointReg Then
+         MoveSpotRegistration(m_nDragEnt, ptCurr - m_ptPrev)
       Else
          Select Case GetRawMode()
             Case RAWMODE.RECTANGLE

OptionPanel/SimulTab/SimulTabVM.vb

@@ -137,10 +137,10 @@ Public Class SimulTabVM
          MyEstim.Estimation_IsEnabled = False
       End If
       ' Impostazioni box stime
-      NotifyPropertyChanged("Time")
-      NotifyPropertyChanged("CutLen")
-      NotifyPropertyChanged("NetArea")
-      NotifyPropertyChanged("Usage")
+      MyEstim.NotifyPropertyChanged("Time")
+      MyEstim.NotifyPropertyChanged("CutLen")
+      MyEstim.NotifyPropertyChanged("NetArea")
+      MyEstim.NotifyPropertyChanged("Usage")
       ' Nascondo eventuali pezzi in parcheggio
       HideParkedParts()
       ' Nascondo eventuale contorno da foto

Project/ProjectV.xaml

@@ -14,6 +14,7 @@
       <OmagOFFICE:ShowPanelV DataContext="{StaticResource ShowPanelVM}"/>
       <OmagOFFICE:ViewPanelV DataContext="{StaticResource ViewPanelVM}"/>
       <OmagOFFICE:InstrumentPanelV DataContext="{StaticResource InstrumentPanelVM}"/>
+      <OmagOFFICE:PrintPanelV DataContext="{StaticResource PrintPanelVM}"/>
       <OmagOFFICE:VeinMatchPanelV DataContext="{StaticResource VeinMatchPanelVM}"/>
       <OmagOFFICE:MachinePanelV DataContext="{StaticResource MachinePanelVM}"/>
    </EgtFloating:EgtFloatingTray>

Project/ProjectV.xaml.vb

@@ -1,3 +1,7 @@
 Public Class ProjectV
 
+   Private Sub LoadPage() Handles Me.Loaded
+      OmagOFFICEMap.SetRefProjectV(Me)
+   End Sub
+
 End Class

SideEntityControl/SideEntityControlV.xaml

@@ -11,7 +11,8 @@
          <RowDefinition Height="Auto"/>
          <RowDefinition Height="Auto"/>
          <RowDefinition Height="Auto"/>
-      </Grid.RowDefinitions>
+         <RowDefinition Height="Auto"/>
+        </Grid.RowDefinitions>
 
         <!--Titolo delle colonne-->
         <Grid Visibility="{Binding Legenda_Visibility}"
@@ -185,6 +186,19 @@
                               Grid.Column="1"/>
       </Grid>
 
+        <Grid Visibility="{Binding Parameter6_Visibility}"
+          Grid.Row="6"
+          Margin="0,0,0,5">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1.8*"/>
+                <ColumnDefinition Width="1.2*"/>
+            </Grid.ColumnDefinitions>
+
+            <TextBlock Text="{Binding Parameter6Msg}" Grid.Row="2"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding Parameter6}"
+                                Grid.Column="1"/>
+        </Grid>
+
     </Grid>
    
 </UserControl>

SideEntityControl/SideEntityControlVM.vb

@@ -404,6 +404,40 @@ Public Class SideEntityControlVM
 
 #End Region    'Parameter 5
 
+#Region "Parameter 6"
+
+   Private m_Parameter6_Visibility As Visibility
+   Public Property Parameter6_Visibility As Visibility
+      Get
+         Return m_Parameter6_Visibility
+      End Get
+      Set(value As Visibility)
+         m_Parameter6_Visibility = value
+         NotifyPropertyChanged(NameOf(Parameter6_Visibility))
+      End Set
+   End Property
+
+   Private m_Parameter6 As Double
+   Public Property Parameter6 As String
+      Get
+         Return LenToString(m_Parameter6, 2)
+      End Get
+      Set(value As String)
+         If m_Mode = ModeOpt.ENGRAVE Then
+            StringToLen(value, m_Parameter6)
+            m_dEngraveAngle = m_Parameter6
+            ' Creo le geometrie dei gocciolatoi
+            RefreshSideAngleText()
+         End If
+      End Set
+   End Property
+   Private Sub SetParameter6(value As Double)
+      m_Parameter6 = value
+      NotifyPropertyChanged("Parameter6")
+   End Sub
+
+#End Region
+
    Private m_dSideAngle As Double = 0
 
    Private m_HeightA As Double = 0
@@ -422,6 +456,7 @@ Public Class SideEntityControlVM
    Private m_dDripDepth As Double = 10
    Private m_dEngraveDepth2 As Double = 5
    Private m_dDripShort As Double = 0
+   Private m_dEngraveAngle As Double = 0
 
    Private m_CallingWndScene As Scene
    Private m_CallingWindow As CallingWindowOpt
@@ -480,6 +515,16 @@ Public Class SideEntityControlVM
       End Set
    End Property
 
+   Private m_Parameter6Msg As String = "Angle"
+   Public Property Parameter6Msg As String
+      Get
+         Return m_Parameter6Msg      ' Angolo
+      End Get
+      Set(value As String)
+         m_Parameter6Msg = value
+      End Set
+   End Property
+
 #End Region    ' Messages
 
 #Region "CONSTRUCTOR"
@@ -526,18 +571,29 @@ Public Class SideEntityControlVM
          Parameter2ab_Visibility = Visibility.Hidden
          Parameter4_Visibility = Visibility.Hidden
          Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Hidden
       ElseIf m_Mode = ModeOpt.FILOTOP Then
          Parameter23_Visibility = Windows.Visibility.Hidden
          Parameter2_Visibility = Visibility.Visible
          Parameter2ab_Visibility = Visibility.Hidden
          Parameter4_Visibility = Visibility.Hidden
          Parameter5_Visibility = Visibility.Visible
+         Parameter6_Visibility = Visibility.Hidden
       ElseIf m_Mode = ModeOpt.ALZANDFRONT Then
          Parameter2_Visibility = Visibility.Hidden
          Parameter23_Visibility = Windows.Visibility.Visible
          Parameter2ab_Visibility = Visibility.Visible
          Parameter4_Visibility = Visibility.Hidden
          Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Hidden
+      ElseIf m_Mode = ModeOpt.ENGRAVE Then
+         ' Temporaneamente lo disabilito
+         Parameter23_Visibility = Windows.Visibility.Visible
+         Parameter4_Visibility = Visibility.Visible
+         Parameter2ab_Visibility = Visibility.Visible
+         Parameter2_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Visible
       Else
          ' Temporaneamente lo disabilito
          Parameter23_Visibility = Windows.Visibility.Visible
@@ -545,6 +601,7 @@ Public Class SideEntityControlVM
          Parameter2ab_Visibility = Visibility.Visible
          Parameter2_Visibility = Visibility.Hidden
          Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Hidden
       End If
 
       '------------------ VALORI E TITOLI PARAMETRI 
@@ -576,12 +633,14 @@ Public Class SideEntityControlVM
          m_dDripDepth = GetMainPrivateProfileDouble(S_SIDES, K_DRIPDEPTH, 10)
          m_dDripShort = GetMainPrivateProfileDouble(S_SIDES, K_DRIPSHORT, 0)
          m_dEngraveDepth2 = GetMainPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0)
+         m_dEngraveAngle = GetMainPrivateProfileDouble(S_SIDES, K_ENGRAVEANGLE, 0)
          SetParameter1(m_dDripOffset)
          SetParameter2(m_dDripOffset2)
          SetParameter2a(m_nEngrNbr2)
          SetParameter2b(m_dDripOffset2)
          SetParameter3(m_dDripDepth)
          SetParameter4(m_dEngraveDepth2)
+         SetParameter6(m_dEngraveAngle)
 
       ElseIf m_Mode = ModeOpt.ALZANDFRONT Then
          ' definisco i nomi dei campi
@@ -1195,7 +1254,11 @@ Public Class SideEntityControlVM
          End While
       End If
 
+      Dim ListEngraveSideAng As New List(Of Integer)
+
       If m_Mode = ModeOpt.DRIP Then
+         ' Assegno colore e attributi
+         Dim nInd As Integer = 0
          ' Esplodo nelle curve componenti
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
@@ -1214,14 +1277,70 @@ Public Class SideEntityControlVM
          End While
       Else
          ' Assegno colore e attributi
+         Dim nInd As Integer = 0
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
             EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
-            ' EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+            'EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
             EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
+            If nInd = 0 Then
+               ' solo se m_dEngraveAngle > 0
+               If Math.Abs(m_dEngraveAngle) > EPS_ANG_SMALL Then
+                  ' salvo l'Id della curva che deve essere manipolato separatamente
+                  ListEngraveSideAng.Add(nCrvId)
+               Else
+                  EgtRemoveInfo(nCrvId, INFO_SIDE_ANGLE)
+                  EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+               End If
+            Else
+               If nInd = m_nEngrNbr2 Then
+                  nInd = -1
+               End If
+               EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+            End If
+            nInd = nInd + 1
+            If nInd > m_nEngrNbr2 Then nInd = 0
             nCrvId = EgtGetNext(nCrvId)
          End While
       End If
+      SplitJointedSideEngrave(ListEngraveSideAng)
+   End Sub
+
+   Private Sub SplitJointedSideEngrave(ListEngraveSideAngId As List(Of Integer))
+      For Each nCrvId As Integer In ListEngraveSideAngId
+         ' eventualmente separo il taglio inclinato
+         Dim dUs, dUe As Double
+         EgtCurveDomain(nCrvId, dUs, dUe)
+         Dim dU As Double = dUs
+         While dU < dUe ' + EPS_ZERO
+            Dim ptCurr As Point3d
+            EgtAtParamPoint(nCrvId, dU + 1, nCrvId, ptCurr)
+            ' separa la curva in questo punto
+            Dim nNewCurvId As Integer = GDB_ID.NULL
+            If dUe > 1 Then
+               nNewCurvId = EgtSplitCurveAtPoint(nCrvId, ptCurr, GDB_RT.LOC)
+            Else
+               nNewCurvId = nCrvId
+            End If
+            EgtSetColor(nCrvId, COL_MCH_ONENGRAVE_ANG())
+            EgtSetInfo(nCrvId, INFO_SIDE_ANGLE, m_dEngraveAngle)
+            ' recupero il vettore di estrusione della curva e la direzione della curva
+            Dim vtAux As Vector3d
+            EgtStartVector(nCrvId, vtAux)
+            Dim vtExtrusion As Vector3d
+            EgtCurveExtrusion(nCrvId, vtExtrusion)
+            ' ruoto il vetottore nella nuova direzione
+            vtExtrusion.Rotate(vtAux, -m_dEngraveAngle)
+            ' assegno il vettore di estrusione nella nuova direzione indicata (segno negativo perchè dentro il pezzo)
+            EgtModifyCurveExtrusion(nCrvId, vtExtrusion)
+            Dim ExtendFactor As Double = New Vector3d(0, 0, 1) * vtExtrusion
+            EgtModifyCurveThickness(nCrvId, -m_dDripDepth / ExtendFactor)
+            If dUe = 1 Then Exit While
+            nCrvId = nNewCurvId
+            ' aggiorno i valori del dominio della curva che rimane
+            EgtCurveDomain(nCrvId, dUs, dUe)
+         End While
+      Next
    End Sub
 
    ' Funzione che modifica l'inclinazione di un lato
@@ -1382,6 +1501,7 @@ Public Class SideEntityControlVM
          WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3))
          WriteMainPrivateProfileString(S_SIDES, K_ENGRAVESHORT, LenToString(m_dDripShort, 3))
          WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEANGLE, LenToString(m_dEngraveAngle, 3))
          For Each objEntity In m_SideEntityList
             If TypeOf objEntity Is DripEntity Then
                Dim CurrEntity As DripEntity = DirectCast(objEntity, DripEntity)

Utility/OmagOFFICEDictionary.xaml

@@ -18,6 +18,7 @@
    <EgtWPFLib5:ShowPanelVM x:Key="ShowPanelVM"/>
    <EgtWPFLib5:ViewPanelVM x:Key="ViewPanelVM"/>
    <EgtWPFLib5:InstrumentPanelVM x:Key="InstrumentPanelVM"/>
+   <OmagOFFICE:PrintPanelVM x:Key="PrintPanelVM"/>
    <OmagOFFICE:MyMachinePanelVM x:Key="MachinePanelVM"/>
    <OmagOFFICE:VeinMatchPanelVM x:Key="VeinMatchPanelVM"/>
    <OmagOFFICE:OptionPanelVM x:Key="OptionPanelVM"/>

Utility/OmagOFFICEMap.vb

@@ -1,5 +1,6 @@
 Imports EgtWPFLib5
 Imports EgtPHOTOLib
+Imports EgtUILib
 
 Module OmagOFFICEMap
 
@@ -229,6 +230,43 @@ Module OmagOFFICEMap
       Return Not IsNothing(m_refSimulTabVM)
    End Function
 
+
+   Private m_refProjectV As ProjectV
+   Friend Sub SetRefProjectV(ProjectV As ProjectV)
+      m_refProjectV = ProjectV
+   End Sub
+
+   Private m_WidthProjectV As Integer = 2000
+   Friend Sub SetWidthDimProjectV(Width As Integer)
+      m_WidthProjectV = Width
+   End Sub
+   Friend Function GetWidthDimProjectV() As Integer
+      If Not IsNothing(m_refProjectV) Then
+         Try
+            m_WidthProjectV = CInt(m_refProjectV.ActualWidth)
+         Catch ex As Exception
+            EgtOutLog(ex.Message)
+         End Try
+      End If
+      Return m_WidthProjectV
+   End Function
+
+   Private m_HeightProjectV As Integer = 1000
+   Friend Sub SetHeightDimProjectV(Eight As Integer)
+      m_HeightProjectV = Eight
+   End Sub
+
+   Friend Function GetHeightDimProjectV() As Integer
+      If Not IsNothing(m_refProjectV) Then
+         Try
+            m_HeightProjectV = CInt(m_refProjectV.ActualHeight)
+         Catch ex As Exception
+            EgtOutLog(ex.Message)
+         End Try
+      End If
+      Return m_HeightProjectV
+   End Function
+
 #End Region    ' Set
 
 #Region "Init"