Gestione primo Engrave inclinato

Constants/ConstIni.vb

@@ -104,6 +104,7 @@ Module ConstIni
    Public Const K_ENGRAVENUMBER2 As String = "EngraveNumber2"
    Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
    Public Const K_ENGRAVESHORT As String = "EngraveShort"
+   Public Const K_ENGRAVEANGLE As String = "EngraveAngle"
    Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
    Public Const K_DRIPOFFSET As String = "DripOffset"
    Public Const K_DRIPOFFSET2 As String = "DripOffset2"
@@ -125,6 +126,7 @@ Module ConstIni
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
    Public Const K_DRAGRECTANGLE As String = "DragRectangle"
+   Public Const K_STARTENDMODIFYONINTCORNER As String = "StartEndModifyOnIntCorner"
 
    Public Const S_SPLIT As String = "Split"
    Public Const K_MOVE_LEV As String = "MoveLevel"

EgtStoneLib/ConstMach.vb

@@ -326,6 +326,9 @@ Module ConstMach
    Public Function COL_MCH_DRIPCUT() As Color3d
       Return New Color3d(255, 0, 165)
    End Function
+   Public Function COL_MCH_ONENGRAVE_ANG() As Color3d
+      Return New Color3d(255, 255, 100)
+   End Function
    Public Function COL_MCH_DRIPFREE() As Color3d
       Return New Color3d(192, 0, 128)
    End Function

OptionPanel/MachiningTab/SplitModeVM.vb

@@ -48,6 +48,8 @@ Public Class SplitModeVM
    Private m_bDragging As Boolean = False
    ' Selected cut
    Private m_nSelected As Integer = GDB_ID.NULL
+   ' Abilita la mofica Inizio fine per i tagli interni sugli angoli
+   Private m_StartEndModifyOnIntCorner As Boolean = False
 
    Private m_ItemList As New ObservableCollection(Of NameIdLsBxItem)
    Public ReadOnly Property ItemList As ObservableCollection(Of NameIdLsBxItem)
@@ -447,6 +449,8 @@ Public Class SplitModeVM
       'm_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
       m_nDragInd = -1
       m_nDragType = 0
+      ' verifico se è abilitata la possibiltà di allungare i lati interni
+      m_StartEndModifyOnIntCorner = (GetMainPrivateProfileInt(S_NEST, K_STARTENDMODIFYONINTCORNER, 0) <> 0)
       ' Nascondo eventuali pezzi in parcheggio
       EstCalc.HideParkedParts()
       ' Nascondo eventuale contorno da foto
@@ -1967,10 +1971,27 @@ Public Class SplitModeVM
 
             Dim bRepeat As Boolean = False
             Do
+               ' Se c'è limite alla lunghezza libera
+               If m_MachiningList(nI).m_dStartFreeLen < FREELEN_INF Then
+                  ' se abilitati i controlli sugli allungamenti dei lati interni
+                  If Not m_StartEndModifyOnIntCorner Then
+                     ' Recupero sicurezza in corner interno
+                     Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, CurrentMachine.sMachIniFile), 10 * EPS_SMALL)
+                     ' Recupero lunghezza baffo del taglio
+                     Dim nPvId As Integer = GDB_ID.NULL
+                     EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+                     Dim dDT As Double = 0
+                     EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                     dUsal = Math.Min(dUsal, m_MachiningList(nI).m_dStartFreeLen - dDT - dCornerSafety)
+                  End If
+               End If
                EgtSetCurrMachining(nOperId)
                Dim dAddLen As Double = 0
                EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
-               If dAddLen - dOrigUsal < -10 * EPS_SMALL Then Return
+               ' verifico che non sia sull'angolo interno (altrimenti vieto la modifica)
+               If Not m_StartEndModifyOnIntCorner And (dAddLen - dOrigUsal < -10 * EPS_SMALL) Then
+                  Return
+               End If
                EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen + dUsal - dOrigUsal)
                EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dUsal)
                UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
@@ -2130,10 +2151,24 @@ Public Class SplitModeVM
             End If
             Dim bRepeat As Boolean = False
             Do
+               ' Se c'è limite alla lunghezza libera
+               If m_MachiningList(nI).m_dEndFreeLen < FREELEN_INF Then
+                  ' se abilitati i controlli sugli allungamenti dei lati interni
+                  If Not m_StartEndModifyOnIntCorner Then
+                     ' Recupero sicurezza in corner interno
+                     Dim dCornerSafety As Double = Math.Max(GetPrivateProfileDouble(S_MACH_NEST, K_MACH_SAFE_LEN_INTCORNER, 1, CurrentMachine.sMachIniFile), 10 * EPS_SMALL)
+                     ' Recupero lunghezza baffo del taglio
+                     Dim nPvId As Integer = GDB_ID.NULL
+                     EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+                     Dim dDT As Double = 0
+                     EgtGetInfo(EgtGetFirstGroupInGroup(nPvId), "DT", dDT)
+                     dUeal = Math.Min(dUeal, m_MachiningList(nI).m_dEndFreeLen - dDT - dCornerSafety)
+                  End If
+               End If
                EgtSetCurrMachining(nOperId)
                Dim dAddLen As Double = 0
                EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
-               If dAddLen - dOrigUeal < -10 * EPS_SMALL Then
+               If Not m_StartEndModifyOnIntCorner And (dAddLen - dOrigUeal < -10 * EPS_SMALL) Then
                   Return
                End If
                EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen + dUeal - dOrigUeal)

SideEntityControl/SideEntityControlV.xaml

@@ -11,7 +11,8 @@
          <RowDefinition Height="Auto"/>
          <RowDefinition Height="Auto"/>
          <RowDefinition Height="Auto"/>
-      </Grid.RowDefinitions>
+         <RowDefinition Height="Auto"/>
+        </Grid.RowDefinitions>
 
         <!--Titolo delle colonne-->
         <Grid Visibility="{Binding Legenda_Visibility}"
@@ -185,6 +186,19 @@
                               Grid.Column="1"/>
       </Grid>
 
+        <Grid Visibility="{Binding Parameter6_Visibility}"
+          Grid.Row="6"
+          Margin="0,0,0,5">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1.8*"/>
+                <ColumnDefinition Width="1.2*"/>
+            </Grid.ColumnDefinitions>
+
+            <TextBlock Text="{Binding Parameter6Msg}" Grid.Row="2"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding Parameter6}"
+                                Grid.Column="1"/>
+        </Grid>
+
     </Grid>
    
 </UserControl>

SideEntityControl/SideEntityControlVM.vb

@@ -404,6 +404,40 @@ Public Class SideEntityControlVM
 
 #End Region    'Parameter 5
 
+#Region "Parameter 6"
+
+   Private m_Parameter6_Visibility As Visibility
+   Public Property Parameter6_Visibility As Visibility
+      Get
+         Return m_Parameter6_Visibility
+      End Get
+      Set(value As Visibility)
+         m_Parameter6_Visibility = value
+         NotifyPropertyChanged(NameOf(Parameter6_Visibility))
+      End Set
+   End Property
+
+   Private m_Parameter6 As Double
+   Public Property Parameter6 As String
+      Get
+         Return LenToString(m_Parameter6, 2)
+      End Get
+      Set(value As String)
+         If m_Mode = ModeOpt.ENGRAVE Then
+            StringToLen(value, m_Parameter6)
+            m_dEngraveAngle = m_Parameter6
+            ' Creo le geometrie dei gocciolatoi
+            RefreshSideAngleText()
+         End If
+      End Set
+   End Property
+   Private Sub SetParameter6(value As Double)
+      m_Parameter6 = value
+      NotifyPropertyChanged("Parameter6")
+   End Sub
+
+#End Region
+
    Private m_dSideAngle As Double = 0
 
    Private m_HeightA As Double = 0
@@ -422,6 +456,7 @@ Public Class SideEntityControlVM
    Private m_dDripDepth As Double = 10
    Private m_dEngraveDepth2 As Double = 5
    Private m_dDripShort As Double = 0
+   Private m_dEngraveAngle As Double = 0
 
    Private m_CallingWndScene As Scene
    Private m_CallingWindow As CallingWindowOpt
@@ -480,6 +515,16 @@ Public Class SideEntityControlVM
       End Set
    End Property
 
+   Private m_Parameter6Msg As String = "Angle"
+   Public Property Parameter6Msg As String
+      Get
+         Return m_Parameter6Msg      ' Angolo
+      End Get
+      Set(value As String)
+         m_Parameter6Msg = value
+      End Set
+   End Property
+
 #End Region    ' Messages
 
 #Region "CONSTRUCTOR"
@@ -526,18 +571,29 @@ Public Class SideEntityControlVM
          Parameter2ab_Visibility = Visibility.Hidden
          Parameter4_Visibility = Visibility.Hidden
          Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Hidden
       ElseIf m_Mode = ModeOpt.FILOTOP Then
          Parameter23_Visibility = Windows.Visibility.Hidden
          Parameter2_Visibility = Visibility.Visible
          Parameter2ab_Visibility = Visibility.Hidden
          Parameter4_Visibility = Visibility.Hidden
          Parameter5_Visibility = Visibility.Visible
+         Parameter6_Visibility = Visibility.Hidden
       ElseIf m_Mode = ModeOpt.ALZANDFRONT Then
          Parameter2_Visibility = Visibility.Hidden
          Parameter23_Visibility = Windows.Visibility.Visible
          Parameter2ab_Visibility = Visibility.Visible
          Parameter4_Visibility = Visibility.Hidden
          Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Hidden
+      ElseIf m_Mode = ModeOpt.ENGRAVE Then
+         ' Temporaneamente lo disabilito
+         Parameter23_Visibility = Windows.Visibility.Visible
+         Parameter4_Visibility = Visibility.Visible
+         Parameter2ab_Visibility = Visibility.Visible
+         Parameter2_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Visible
       Else
          ' Temporaneamente lo disabilito
          Parameter23_Visibility = Windows.Visibility.Visible
@@ -545,6 +601,7 @@ Public Class SideEntityControlVM
          Parameter2ab_Visibility = Visibility.Visible
          Parameter2_Visibility = Visibility.Hidden
          Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Hidden
       End If
 
       '------------------ VALORI E TITOLI PARAMETRI 
@@ -576,12 +633,14 @@ Public Class SideEntityControlVM
          m_dDripDepth = GetMainPrivateProfileDouble(S_SIDES, K_DRIPDEPTH, 10)
          m_dDripShort = GetMainPrivateProfileDouble(S_SIDES, K_DRIPSHORT, 0)
          m_dEngraveDepth2 = GetMainPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0)
+         m_dEngraveAngle = GetMainPrivateProfileDouble(S_SIDES, K_ENGRAVEANGLE, 0)
          SetParameter1(m_dDripOffset)
          SetParameter2(m_dDripOffset2)
          SetParameter2a(m_nEngrNbr2)
          SetParameter2b(m_dDripOffset2)
          SetParameter3(m_dDripDepth)
          SetParameter4(m_dEngraveDepth2)
+         SetParameter6(m_dEngraveAngle)
 
       ElseIf m_Mode = ModeOpt.ALZANDFRONT Then
          ' definisco i nomi dei campi
@@ -1195,7 +1254,11 @@ Public Class SideEntityControlVM
          End While
       End If
 
+      Dim ListEngraveSideAng As New List(Of Integer)
+
       If m_Mode = ModeOpt.DRIP Then
+         ' Assegno colore e attributi
+         Dim nInd As Integer = 0
          ' Esplodo nelle curve componenti
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
@@ -1214,14 +1277,70 @@ Public Class SideEntityControlVM
          End While
       Else
          ' Assegno colore e attributi
+         Dim nInd As Integer = 0
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
             EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
-            ' EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+            'EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
             EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
+            If nInd = 0 Then
+               ' solo se m_dEngraveAngle > 0
+               If Math.Abs(m_dEngraveAngle) > EPS_ANG_SMALL Then
+                  ' salvo l'Id della curva che deve essere manipolato separatamente
+                  ListEngraveSideAng.Add(nCrvId)
+               Else
+                  EgtRemoveInfo(nCrvId, INFO_SIDE_ANGLE)
+                  EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+               End If
+            Else
+               If nInd = m_nEngrNbr2 Then
+                  nInd = -1
+               End If
+               EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+            End If
+            nInd = nInd + 1
+            If nInd > m_nEngrNbr2 Then nInd = 0
             nCrvId = EgtGetNext(nCrvId)
          End While
       End If
+      SplitJointedSideEngrave(ListEngraveSideAng)
+   End Sub
+
+   Private Sub SplitJointedSideEngrave(ListEngraveSideAngId As List(Of Integer))
+      For Each nCrvId As Integer In ListEngraveSideAngId
+         ' eventualmente separo il taglio inclinato
+         Dim dUs, dUe As Double
+         EgtCurveDomain(nCrvId, dUs, dUe)
+         Dim dU As Double = dUs
+         While dU < dUe ' + EPS_ZERO
+            Dim ptCurr As Point3d
+            EgtAtParamPoint(nCrvId, dU + 1, nCrvId, ptCurr)
+            ' separa la curva in questo punto
+            Dim nNewCurvId As Integer = GDB_ID.NULL
+            If dUe > 1 Then
+               nNewCurvId = EgtSplitCurveAtPoint(nCrvId, ptCurr, GDB_RT.LOC)
+            Else
+               nNewCurvId = nCrvId
+            End If
+            EgtSetColor(nCrvId, COL_MCH_ONENGRAVE_ANG())
+            EgtSetInfo(nCrvId, INFO_SIDE_ANGLE, m_dEngraveAngle)
+            ' recupero il vettore di estrusione della curva e la direzione della curva
+            Dim vtAux As Vector3d
+            EgtStartVector(nCrvId, vtAux)
+            Dim vtExtrusion As Vector3d
+            EgtCurveExtrusion(nCrvId, vtExtrusion)
+            ' ruoto il vetottore nella nuova direzione
+            vtExtrusion.Rotate(vtAux, -m_dEngraveAngle)
+            ' assegno il vettore di estrusione nella nuova direzione indicata (segno negativo perchè dentro il pezzo)
+            EgtModifyCurveExtrusion(nCrvId, vtExtrusion)
+            Dim ExtendFactor As Double = New Vector3d(0, 0, 1) * vtExtrusion
+            EgtModifyCurveThickness(nCrvId, -m_dDripDepth / ExtendFactor)
+            If dUe = 1 Then Exit While
+            nCrvId = nNewCurvId
+            ' aggiorno i valori del dominio della curva che rimane
+            EgtCurveDomain(nCrvId, dUs, dUe)
+         End While
+      Next
    End Sub
 
    ' Funzione che modifica l'inclinazione di un lato
@@ -1382,6 +1501,7 @@ Public Class SideEntityControlVM
          WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3))
          WriteMainPrivateProfileString(S_SIDES, K_ENGRAVESHORT, LenToString(m_dDripShort, 3))
          WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEANGLE, LenToString(m_dEngraveAngle, 3))
          For Each objEntity In m_SideEntityList
             If TypeOf objEntity Is DripEntity Then
                Dim CurrEntity As DripEntity = DirectCast(objEntity, DripEntity)