- Evitato contextmenu vuoto

- Migliorata gestione nuovo pezzo
- Correzioni e migliorie

Icarus/Application.xaml.vb

@@ -5,6 +5,14 @@
    Protected Overrides Sub OnStartup(e As StartupEventArgs)
       MyBase.OnStartup(e)
       ShutdownMode = System.Windows.ShutdownMode.OnMainWindowClose
+      If e.Args.Count = 0 Then
+         ' creo finestra SplashScreen
+         Dim SplashScreen As New SplashScreen
+         Me.MainWindow = SplashScreen
+         Me.MainWindow.Show()
+         Map.SetRefSplashScreen(SplashScreen)
+      End If
+
       ' Creo la View principale
       Me.MainWindow = New MainWindowV
       ' Mostro la View principale

Icarus/Constants/Const3dPrint.vb

@@ -3,7 +3,6 @@
    Public Const TABLE = "Table"
    Public Const TABLE_OUTLINE = "TableOutline"
    Public Const PART = "Part"
-   Public Const ORIGINAL_SOLID = "OriginalSolid"
    Public Const PRINT_SOLID = "PrintSolid"
    Public Const LAY_MACH_START = "MachStart"
    Public Const LAY_REFERENCE = "Frame"
@@ -64,16 +63,20 @@
 
    ' parametri Lavorazione
    Public Const MAC_TORECALC_SLICE = "ToRecalcSlice"
+   Public Const MAC_TORECALC_TFS = "ToRecalcTFS"
    Public Const MAC_TORECALC_GENERATE = "ToRecalcGenerate"
    Public Const MAC_GUID = "GUID"
    Public Const MAC_NAME = "Name"
    Public Const MAC_SLICING45 = "Slicing45"
+   Public Const MAC_SLICINGTYPE = "SlicingType"
+   Public Const MAC_SPIRALVASE = "SpiralVase"
    Public Const MAC_STRANDH = "StrandH"
    Public Const MAC_STRANDW = "StrandW"
    Public Const MAC_STRANDCOUNT = "StrandCount"
    Public Const MAC_OFFSET = "Offset"
    Public Const MAC_STARTPOINTOFFSETONSLICE = "StartPointOffsetOnSlice"
    Public Const MAC_STRANDORDER = "StrandOrder"
+   Public Const MAC_STRANDOVERLAP = "StrandOverlap"
    Public Const MAC_DIRECTION = "Direction"
    Public Const MAC_LINKTYPE = "LinkType"
    Public Const MAC_LINKPARAM = "LinkParam"
@@ -86,12 +89,14 @@
    Public Const MAC_LEADOUTTANGDIST = "LeadOutTangDist"
    Public Const MAC_LEADOUTORTHODIST = "LeadOutOrthoDist"
    Public Const MAC_COASTINGLEN = "CoastingLen"
-   Public Const MAC_COASTINGFEED = "CoastingFeed"
+   Public Const MAC_COASTINGFEEDPU = "CoastingFeedPu"
    Public Const MAC_WIPELEN = "WipeLen"
    Public Const MAC_WIPEFEEDPU = "WipeFeedPu"
+   Public Const MAC_WIPEDIR = "WipeDir"
    Public Const MAC_FLOORCOUNT = "FloorCount"
    Public Const MAC_G0FEED = "G0Feed"
    Public Const MAC_TOOLDIAM = "ToolDiam"
+   Public Const MAC_RIBSTYPE = "RibsType"
    Public Const MAC_RIBSOVERLAP = "RibsOverlap"
    Public Const MAC_RIBSSTRANDCOUNT = "RibsStrandCount"
    Public Const MAC_RIBSLINK = "RibsLink"
@@ -117,6 +122,7 @@
    Public Const MAC_AUXSOLIDSCOASTINGLEN = "AuxSolidsCoastingLen"
    Public Const MAC_AUXSOLIDSWIPELEN = "AuxSolidsWipeLen"
    Public Const MAC_AUXSOLIDSWIPEDIR = "AuxSolidsWipeDir"
+   Public Const MAC_CONSTANT = "Constant"
    Public Const MAC_MATERIALS = "Materials"
 
    ' parametri StartMach
@@ -137,6 +143,14 @@
    ' macchina in progetto
    Public Const KEY_MACHINE_NAME = "MachineName"
 
+   ' materiale in progetto
+   Public Const KEY_MATERIAL_GUID = "MaterialGuid"
+   Public Const KEY_MATERIAL_NAME = "MaterialName"
+   ' nome file cn in progetto
+   Public Const KEY_ISOFILE_PATH = "IsoFilePath"
+
    Public Const FILE_PATH = "FilePath"
+   Public Const PART_NAME = "PartName"
+   Public Const ENTITY_NAME = "EntityName"
 
 End Module

Icarus/Constants/ConstIni.vb

@@ -42,6 +42,7 @@ Public Module ConstIni
    Public Const K_MOD_AUXSOLIDS As String = "ModAuxSolids"
    Public Const K_MOD_SOLIDSLICE As String = "ModSolidSlice"
    Public Const K_MOD_SLICETOOLPATH As String = "ModSliceToolPath"
+   Public Const K_MOD_OTHERS As String = "ModOthers"
    Public Const K_SLC_PRINTSOLID As String = "SlcPrintSolid"
    Public Const K_SLC_REFERENCE As String = "SlcReference"
    Public Const K_SLC_STARTMACHINING As String = "SlcStartMAchining"
@@ -50,6 +51,7 @@ Public Module ConstIni
    Public Const K_SLC_AUXSOLIDS As String = "SlcAuxSolids"
    Public Const K_SLC_SOLIDSLICE As String = "SlcSolidSlice"
    Public Const K_SLC_SLICETOOLPATH As String = "SlcSliceToolPath"
+   Public Const K_SLC_OTHERS As String = "SlcOthers"
 
    'Public Const S_LUA As String = "Lua"
    'Public Const K_LIBSDIR As String = "LibsDir"
@@ -60,6 +62,7 @@ Public Module ConstIni
    'Public Const K_NFEFONTDIR As String = "NfeFontDir"
    'Public Const K_DEFAULTCOLOR As String = "DefaultColor"
    'Public Const K_SAVETYPE As String = "SaveType"
+   Public Const K_SURFTMTOLER As String = "SurfTmToler"
 
    'Public Const S_OPENGL As String = "OpenGL"
    'Public Const K_DOUBLEBUFFER As String = "DoubleBuffer"
@@ -95,6 +98,8 @@ Public Module ConstIni
    'Public Const K_MAJLNCOLOR As String = "MajLnColor"
 
    Public Const S_IMPORT As String = "Import"
+   Public Const K_DXFSCALE As String = "DxfScale"
+   Public Const K_STLSCALE As String = "StlScale"
    Public Const K_CNCFLAG As String = "CncFlag"
 
    'Public Const S_SIMUL As String = "Simul"
@@ -106,6 +111,7 @@ Public Module ConstIni
    Public Const K_CURRMATERIAL As String = "CurrMaterial"
    Public Const K_CURRMACHINING As String = "CurrMachining"
    Public Const K_VIEWSLIDER As String = "ViewSlider"
+   Public Const K_IMPORTCURREXTENSION As String = "ImportCurrExtension"
 
    Public Const S_MRUFILES As String = "MruFiles"
    Public Const S_MRUIMPORTFILES As String = "MruImportFiles"

Icarus/Constants/ConstMachIni.vb

@@ -9,6 +9,9 @@
 
    Public Const S_CHANNELS As String = "Channels"
 
+   Public Const S_PARTPROGRAM As String = "PartProgram"
+   Public Const S_EXTENSION As String = "Extension"
+
    ' Variables della macchina corrente
    Public Const S_MAINVARIABLES As String = "MainVariables"
    Public Const S_VARIABLES As String = "Variables"
@@ -29,6 +32,7 @@
    Public Const K_MACH_EXITSCRIPT As String = "ExitScript"
 
    Public Const S_MACH_PRINTING3D As String = "3dPrinting"
+   Public Const K_HORIZONTAL_PRINT As String = "HorizontalPrint"
    Public Const K_SPEED_MIN As String = "SpeedMin"
    Public Const K_SPEED_MAX As String = "SpeedMax"
 

Icarus/CurrMachiningPanel/CurrMachining.vb

@@ -16,11 +16,21 @@ Public Class CurrMachining
       End Set
    End Property
 
-   Public ReadOnly Property bCurrSlicing45 As Boolean
+   Public ReadOnly Property dCurrSlicingType As Machining.MPAR_SLICINGTYPE
       Get
-         Dim Slicing45 As CurrCheckMachiningParam = m_CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(y) y.Type = MachiningParam.Params.SLICING45)
+         Dim SlicingType As CurrComboMachiningParam = m_CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(y) y.Type = MachiningParam.Params.SLICINGTYPE)
+         If Not IsNothing(SlicingType) Then
+            Return SlicingType.SelValue.Id
+         Else
+            Return 0
+         End If
+      End Get
+   End Property
+   Public ReadOnly Property sCurrSlicingType As String
+      Get
+         Dim Slicing45 As CurrComboMachiningParam = m_CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(y) y.Type = MachiningParam.Params.SLICINGTYPE)
          If Not IsNothing(Slicing45) Then
-            Return Slicing45.bValue
+            Return Slicing45.SelValue.Name
          Else
             Return False
          End If
@@ -97,11 +107,6 @@ Public Class CurrMachining
       End If
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.GENERAL, nPartId, m_nIndex, False))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.LINK, nPartId, m_nIndex, False))
-      'm_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.LEADIN, nPartId, m_nIndex, False))
-      'm_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.LEADOUT, nPartId, m_nIndex, False))
-      'm_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.COASTING, nPartId, m_nIndex, False))
-      'm_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.WIPE, nPartId, m_nIndex, False))
-      'm_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.TOOL, nPartId, m_nIndex, False))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.RIBS, nPartId, m_nIndex, False))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.SHELL_NUMBER, nPartId, m_nIndex, False))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.AUX_SOLID, nPartId, m_nIndex, False))
@@ -119,11 +124,6 @@ Public Class CurrMachining
       m_sCurrGUID = CurrMachiningInDb.sGUID
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.GENERAL, nPartId, m_nIndex, True))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.LINK, nPartId, m_nIndex, True))
-      'm_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.LEADIN, nPartId, m_nIndex, True))
-      'm_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.LEADOUT, nPartId, m_nIndex, True))
-      'm_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.COASTING, nPartId, m_nIndex, True))
-      'm_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.WIPE, nPartId, m_nIndex, True))
-      'm_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.TOOL, nPartId, m_nIndex, True))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.RIBS, nPartId, m_nIndex, True))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.SHELL_NUMBER, nPartId, m_nIndex, True))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.AUX_SOLID, nPartId, m_nIndex, True))
@@ -153,7 +153,7 @@ Public Class CurrMachining
          Case NameOf(sender.dValue), NameOf(sender.sValue), NameOf(sender.bValue), NameOf(sender.SelValue)
             m_bIsModified = m_CathegoryList.Any(Function(x) x.MachiningParamList.Any(Function(y) y.bIsModified))
             NotifyPropertyChanged(NameOf(ghName))
-            NotifyPropertyChanged(NameOf(bCurrSlicing45))
+            NotifyPropertyChanged(NameOf(sCurrSlicingType))
             NotifyPropertyChanged(NameOf(sCurrStrandH))
             NotifyPropertyChanged(NameOf(sCurrStrandW))
             NotifyPropertyChanged(NameOf(sCurrStrandCount))
@@ -182,17 +182,20 @@ Public Class CurrMachiningCathegory
       Select Case m_Type
          Case Cathegories.GENERAL
             m_sName = "General"
-            m_MachiningParamList = New List(Of MachiningParam)({New CurrCheckMachiningParam(MachiningParam.Params.SLICING45, nPartId, nIndex, bForceFromDb),
+            m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.SLICINGTYPE, nPartId, nIndex, bForceFromDb),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.SPIRALVASE, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.STRANDH, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.STRANDW, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.STRANDCOUNT, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.OFFSET, nPartId, nIndex, bForceFromDb),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.STRANDOVERLAP, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.STARTPOINTOFFSETONSLICE, nPartId, nIndex, bForceFromDb),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.STRANDORDER, nPartId, nIndex, bForceFromDb),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.DIRECTION, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.G0FEED, nPartId, nIndex, bForceFromDb),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.TOOLDIAM, nPartId, nIndex, bForceFromDb)})
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.TOOLDIAM, nPartId, nIndex, bForceFromDb),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.FLOWRATE_PC, nPartId, nIndex, bForceFromDb)})
          Case Cathegories.LINK
             m_sName = "Shell"
             m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.LINKTYPE, nPartId, nIndex, bForceFromDb),
@@ -206,41 +209,21 @@ Public Class CurrMachiningCathegory
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.LEADOUTTANGDIST, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.LEADOUTORTHODIST, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.COASTINGLEN, nPartId, nIndex, bForceFromDb),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.COASTINGFEED, nPartId, nIndex, bForceFromDb),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.COASTINGFEED_PC, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.WIPELEN, nPartId, nIndex, bForceFromDb),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.WIPEFEEDPU, nPartId, nIndex, bForceFromDb)})
-         'Case Cathegories.LEADIN
-         '   m_sName = "Lead In"
-         '   m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.OFFSETLEADPOINT, nPartId, nIndex, bForceFromDb),
-         '                                                       New CurrComboMachiningParam(MachiningParam.Params.LEADIN, nPartId, nIndex, bForceFromDb),
-         '                                                       New CurrNumericMachiningParam(MachiningParam.Params.LEADINTANGDIST, nPartId, nIndex, bForceFromDb),
-         '                                                       New CurrNumericMachiningParam(MachiningParam.Params.LEADINORTHODIST, nPartId, nIndex, bForceFromDb)})
-         'Case Cathegories.LEADOUT
-         '   m_sName = "Lead Out"
-         '   m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.LEADOUT, nPartId, nIndex, bForceFromDb),
-         '                                                       New CurrNumericMachiningParam(MachiningParam.Params.LEADOUTTANGDIST, nPartId, nIndex, bForceFromDb),
-         '                                                       New CurrNumericMachiningParam(MachiningParam.Params.LEADOUTORTHODIST, nPartId, nIndex, bForceFromDb)})
-         'Case Cathegories.COASTING
-         '   m_sName = "Coasting"
-         '   m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.COASTINGLEN, nPartId, nIndex, bForceFromDb),
-         '                                                       New CurrNumericMachiningParam(MachiningParam.Params.COASTINGFEED, nPartId, nIndex, bForceFromDb)})
-         'Case Cathegories.WIPE
-         '   m_sName = "Wipe"
-         '   m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.WIPELEN, nPartId, nIndex, bForceFromDb),
-         '                                                       New CurrNumericMachiningParam(MachiningParam.Params.WIPEFEEDPU, nPartId, nIndex, bForceFromDb)})
-         'Case Cathegories.TOOL
-         '   m_sName = "Tool"
-         '   m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.TOOLDIAM, nPartId, nIndex, bForceFromDb)})
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.WIPEFEED_PC, nPartId, nIndex, bForceFromDb),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.WIPEDIR, nPartId, nIndex, bForceFromDb)})
          Case Cathegories.RIBS
             m_sName = "Ribs"
-            m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nPartId, nIndex, bForceFromDb),
+            m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.RIBSTYPE, nPartId, nIndex, bForceFromDb),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.RIBSSTRANDCOUNT, nPartId, nIndex, bForceFromDb),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.RIBSLINK, nPartId, nIndex, bForceFromDb),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.RIBSINVERTORDER, nPartId, nIndex, bForceFromDb),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.RIBSINVERTDIRECTION, nPartId, nIndex, bForceFromDb),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.RIBSLEADININVERT, nPartId, nIndex, bForceFromDb),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.RIBSLINK, nPartId, nIndex, bForceFromDb),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.RIBSINVERTORDER, nPartId, nIndex, bForceFromDb),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.RIBSINVERTDIRECTION, nPartId, nIndex, bForceFromDb),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.RIBSLEADININVERT, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.RIBSLEADINLEN, nPartId, nIndex, bForceFromDb),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.RIBSLEADOUTINVERT, nPartId, nIndex, bForceFromDb),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.RIBSLEADOUTINVERT, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.RIBSLEADOUTLEN, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.RIBSLEADOUTCOASTING, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.RIBSLEADOUTWIPE, nPartId, nIndex, bForceFromDb),
@@ -290,13 +273,13 @@ Public Class CurrNumericMachiningParam
 
    Public Overrides Property sValue As String
       Get
-         Return If(m_bIsLen, LenToString(m_dValue, 1), m_dValue)
+         Return If(m_bIsLen, LenToString(m_dValue, 1), DoubleToString( m_dValue, 2))
       End Get
       Set(value As String)
          If m_bIsLen Then
             StringToLen(value, m_dValue)
          Else
-            m_dValue = value
+            StringToDouble( value, m_dValue)
          End If
          NotifyPropertyChanged(NameOf(sValue))
          NotifyPropertyChanged(NameOf(bIsModifiedFromDb))
@@ -335,6 +318,9 @@ Public Class CurrNumericMachiningParam
          Case Params.OFFSET
             bReadFromPart = EgtGetInfo(nPartId, MAC_OFFSET, m_dValue)
             m_bIsLen = True
+         Case Params.STRANDOVERLAP
+            bReadFromPart = EgtGetInfo(nPartId, MAC_STRANDOVERLAP, m_dValue)
+            m_bIsLen = True
          Case Params.STARTPOINTOFFSETONSLICE
             bReadFromPart = EgtGetInfo(nPartId, MAC_STARTPOINTOFFSETONSLICE, m_dValue)
             m_bIsLen = True
@@ -362,14 +348,17 @@ Public Class CurrNumericMachiningParam
          Case Params.COASTINGLEN
             bReadFromPart = EgtGetInfo(nPartId, MAC_COASTINGLEN, m_dValue)
             m_bIsLen = True
-         Case Params.COASTINGFEED
-            bReadFromPart = EgtGetInfo(nPartId, MAC_COASTINGFEED, m_dValue)
-            m_bIsLen = True
+         Case Params.COASTINGFEED_PC
+            bReadFromPart = EgtGetInfo(nPartId, MAC_COASTINGFEEDPU, m_dValue)
+            m_bIsLen = False
          Case Params.WIPELEN
             bReadFromPart = EgtGetInfo(nPartId, MAC_WIPELEN, m_dValue)
             m_bIsLen = True
-         Case Params.WIPEFEEDPU
+         Case Params.WIPEFEED_PC
             bReadFromPart = EgtGetInfo(nPartId, MAC_WIPEFEEDPU, m_dValue)
+            m_bIsLen = False
+         Case Params.WIPEDIR
+            bReadFromPart = EgtGetInfo(nPartId, MAC_WIPEDIR, m_dValue)
             m_bIsLen = True
          Case Params.FLOORCOUNT
             bReadFromPart = EgtGetInfo(nPartId, MAC_FLOORCOUNT, m_dValue)
@@ -386,24 +375,9 @@ Public Class CurrNumericMachiningParam
          Case Params.RIBSSTRANDCOUNT
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSSTRANDCOUNT, m_dValue)
             m_bIsLen = True
-         Case Params.RIBSLINK
-            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLINK, m_dValue)
-            m_bIsLen = True
-         Case Params.RIBSINVERTORDER
-            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSINVERTORDER, m_dValue)
-            m_bIsLen = True
-         Case Params.RIBSINVERTDIRECTION
-            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSINVERTDIRECTION, m_dValue)
-            m_bIsLen = True
-         Case Params.RIBSLEADININVERT
-            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLEADININVERT, m_dValue)
-            m_bIsLen = True
          Case Params.RIBSLEADINLEN
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLEADINLEN, m_dValue)
             m_bIsLen = True
-         Case Params.RIBSLEADOUTINVERT
-            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLEADOUTINVERT, m_dValue)
-            m_bIsLen = True
          Case Params.RIBSLEADOUTLEN
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLEADOUTLEN, m_dValue)
             m_bIsLen = True
@@ -446,38 +420,38 @@ Public Class CurrNumericMachiningParam
          Case Params.AUXSOLIDSWIPEDIR
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSWIPEDIR, m_dValue)
             m_bIsLen = True
+         Case Params.FLOWRATE_PC
+            bReadFromPart = EgtGetInfo(nPartId, MAC_CONSTANT, m_dValue)
+            m_bIsLen = False
       End Select
       m_dOrigValue = m_dValue
       If nIndex > 0 Then
          Dim DbMachining As Machining = Map.refMachiningDbVM.MachiningList.FirstOrDefault(Function(x) x.nIndex = nIndex)
          Select Case Type
-            Case Params.STRANDH, Params.STRANDW, Params.STRANDCOUNT, Params.OFFSET, Params.STARTPOINTOFFSETONSLICE, Params.FLOORCOUNT, Params.G0FEED, Params.TOOLDIAM
+            Case Params.STRANDH, Params.STRANDW, Params.STRANDCOUNT, Params.OFFSET, Params.STRANDOVERLAP, Params.STARTPOINTOFFSETONSLICE,
+                 Params.FLOORCOUNT, Params.G0FEED, Params.TOOLDIAM, Params.FLOWRATE_PC
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.LINKPARAM, Params.LINKZUP, Params.OFFSETLEADPOINT, Params.LEADINTANGDIST, Params.LEADINORTHODIST,
-                 Params.LEADOUTTANGDIST, Params.LEADOUTORTHODIST, Params.COASTINGLEN, Params.COASTINGFEED, Params.WIPELEN, Params.WIPEFEEDPU
+                 Params.LEADOUTTANGDIST, Params.LEADOUTORTHODIST, Params.COASTINGLEN, Params.COASTINGFEED_PC,
+                 Params.WIPELEN, Params.WIPEFEED_PC, Params.WIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.LINK).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            'Case Params.OFFSETLEADPOINT, Params.LEADINTANGDIST, Params.LEADINORTHODIST
-            '   m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.LEADIN).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            'Case Params.LEADOUTTANGDIST, Params.LEADOUTORTHODIST
-            '   m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.LEADOUT).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            'Case Params.COASTINGLEN, Params.COASTINGFEED
-            '   m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.COASTING).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            'Case Params.WIPELEN, Params.WIPEFEEDPU
-            '   m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.WIPE).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            'Case Params.TOOLDIAM
-            '   m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.TOOL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            Case Params.RIBSOVERLAP, Params.RIBSSTRANDCOUNT, Params.RIBSLINK, Params.RIBSINVERTORDER, Params.RIBSINVERTDIRECTION, Params.RIBSLEADININVERT,
-               Params.RIBSLEADINLEN, Params.RIBSLEADOUTINVERT, Params.RIBSLEADOUTLEN, Params.RIBSLEADOUTCOASTING, Params.RIBSLEADOUTWIPE, Params.RIBSLEADOUTWIPEDIR
+            Case Params.RIBSOVERLAP, Params.RIBSSTRANDCOUNT, Params.RIBSLINK, Params.RIBSINVERTORDER, Params.RIBSINVERTDIRECTION,
+                 Params.RIBSLEADININVERT, Params.RIBSLEADINLEN, Params.RIBSLEADOUTINVERT, Params.RIBSLEADOUTLEN, Params.RIBSLEADOUTCOASTING,
+                 Params.RIBSLEADOUTWIPE, Params.RIBSLEADOUTWIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.RIBS).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.SHELLNBRDIFFERENCE, Params.SHELLNBRCOASTING, Params.SHELLNBRWIPE, Params.SHELLNBRWIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.SHELL_NUMBER).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            Case Params.AUXSOLIDSOVERLAP, Params.AUXSOLIDSLINKPARAM, Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE, Params.AUXSOLIDSCOASTINGLEN, Params.AUXSOLIDSWIPELEN, Params.AUXSOLIDSWIPEDIR
+            Case Params.AUXSOLIDSOVERLAP, Params.AUXSOLIDSLINKPARAM, Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE,
+                 Params.AUXSOLIDSCOASTINGLEN, Params.AUXSOLIDSWIPELEN, Params.AUXSOLIDSWIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
          If bForceFromDb OrElse Not bReadFromPart Then
             m_dValue = m_DbParam.dOrigValue
             m_dOrigValue = m_DbParam.dOrigValue
          End If
+      ElseIf Type = Params.FLOWRATE_PC AndAlso Not bReadFromPart Then
+         m_dValue = 100
+         m_dOrigValue = 100
       End If
    End Sub
 
@@ -497,6 +471,8 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_STRANDCOUNT, sWriteValue)
          Case Params.OFFSET
             EgtSetInfo(nPartId, MAC_OFFSET, sWriteValue)
+         Case Params.STRANDOVERLAP
+            EgtSetInfo(nPartId, MAC_STRANDOVERLAP, sWriteValue)
          Case Params.STARTPOINTOFFSETONSLICE
             EgtSetInfo(nPartId, MAC_STARTPOINTOFFSETONSLICE, sWriteValue)
          Case Params.LINKPARAM
@@ -515,12 +491,14 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_LEADOUTORTHODIST, sWriteValue)
          Case Params.COASTINGLEN
             EgtSetInfo(nPartId, MAC_COASTINGLEN, sWriteValue)
-         Case Params.COASTINGFEED
-            EgtSetInfo(nPartId, MAC_COASTINGFEED, sWriteValue)
+         Case Params.COASTINGFEED_PC
+            EgtSetInfo(nPartId, MAC_COASTINGFEEDPU, sWriteValue)
          Case Params.WIPELEN
             EgtSetInfo(nPartId, MAC_WIPELEN, sWriteValue)
-         Case Params.WIPEFEEDPU
+         Case Params.WIPEFEED_PC
             EgtSetInfo(nPartId, MAC_WIPEFEEDPU, sWriteValue)
+         Case Params.WIPEDIR
+            EgtSetInfo(nPartId, MAC_WIPEDIR, sWriteValue)
          Case Params.FLOORCOUNT
             EgtSetInfo(nPartId, MAC_FLOORCOUNT, sWriteValue)
          Case Params.G0FEED
@@ -531,18 +509,8 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_RIBSOVERLAP, sWriteValue)
          Case Params.RIBSSTRANDCOUNT
             EgtSetInfo(nPartId, MAC_RIBSSTRANDCOUNT, sWriteValue)
-         Case Params.RIBSLINK
-            EgtSetInfo(nPartId, MAC_RIBSLINK, sWriteValue)
-         Case Params.RIBSINVERTORDER
-            EgtSetInfo(nPartId, MAC_RIBSINVERTORDER, sWriteValue)
-         Case Params.RIBSINVERTDIRECTION
-            EgtSetInfo(nPartId, MAC_RIBSINVERTDIRECTION, sWriteValue)
-         Case Params.RIBSLEADININVERT
-            EgtSetInfo(nPartId, MAC_RIBSLEADININVERT, sWriteValue)
          Case Params.RIBSLEADINLEN
             EgtSetInfo(nPartId, MAC_RIBSLEADINLEN, sWriteValue)
-         Case Params.RIBSLEADOUTINVERT
-            EgtSetInfo(nPartId, MAC_RIBSLEADOUTINVERT, sWriteValue)
          Case Params.RIBSLEADOUTLEN
             EgtSetInfo(nPartId, MAC_RIBSLEADOUTLEN, sWriteValue)
          Case Params.RIBSLEADOUTCOASTING
@@ -571,6 +539,8 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_AUXSOLIDSWIPELEN, sWriteValue)
          Case Params.AUXSOLIDSWIPEDIR
             EgtSetInfo(nPartId, MAC_AUXSOLIDSWIPEDIR, sWriteValue)
+         Case Params.FLOWRATE_PC
+            EgtSetInfo(nPartId, MAC_CONSTANT, sWriteValue)
       End Select
    End Sub
 
@@ -580,6 +550,7 @@ Public Class CurrNumericMachiningParam
 
    Friend Overrides Sub ResetParam()
       m_dValue = m_dOrigValue
+      NotifyPropertyChanged(NameOf(sValue))
    End Sub
 
 #Region "COMMANDS"
@@ -645,6 +616,7 @@ Public Class CurrStringMachiningParam
 
    Friend Overrides Sub ResetParam()
       m_sValue = m_sOrigValue
+      NotifyPropertyChanged(NameOf(sValue))
    End Sub
 
 #Region "COMMANDS"
@@ -704,6 +676,21 @@ Public Class CurrComboMachiningParam
       MyBase.New(Type, nIndex)
       Dim bReadFromPart As Boolean = False
       Select Case Type
+         Case Params.SLICINGTYPE
+            Dim nHorizontalPrint As Integer = GetPrivateProfileInt(S_MACH_PRINTING3D, K_HORIZONTAL_PRINT, 0, CurrentMachine.sMachIniFile)
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_SLICINGTYPE.VERTICAL, "Vertical"),
+                                                     New IdNameStruct(Machining.MPAR_SLICINGTYPE.DEG45, "45°")})
+            If nHorizontalPrint > 0 Then
+               m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.HORIZONTAL, "Horizontal"))
+            End If
+            Dim nSelValue As Integer = 0
+            bReadFromPart = EgtGetInfo(nPartId, MAC_SLICINGTYPE, nSelValue)
+            If Not bReadFromPart Then
+               Dim nSlicing45 As Integer = 0
+               bReadFromPart = EgtGetInfo(nPartId, MAC_SLICING45, nSlicing45)
+               nSelValue = If(nSlicing45 = 0, Machining.MPAR_SLICINGTYPE.VERTICAL, Machining.MPAR_SLICINGTYPE.DEG45)
+            End If
+            m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
          Case Params.STRANDORDER
             m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_STRANDORDERS.OUTTOIN, "From Outside To Inside"),
                                                      New IdNameStruct(Machining.MPAR_STRANDORDERS.INTOOUT, "From Inside To Outside")})
@@ -737,6 +724,13 @@ Public Class CurrComboMachiningParam
             Dim nSelValue As Integer = 0
             bReadFromPart = EgtGetInfo(nPartId, MAC_LEADOUT, nSelValue)
             m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+         Case Params.RIBSTYPE
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_RIBSTYPE.INTERNAL, "Internal"),
+                                                     New IdNameStruct(Machining.MPAR_RIBSTYPE.EXTERNAL, "External"),
+                                                     New IdNameStruct(Machining.MPAR_RIBSTYPE.UNBOUNDED, "Unbounded")})
+            Dim nSelValue As Integer = 0
+            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSTYPE, nSelValue)
+            m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
          Case Params.AUXSOLIDSINFILL
             m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL.NONE, "None"),
                                                      New IdNameStruct(Machining.MPAR_INFILL.OFFSET, "Offset"),
@@ -762,14 +756,12 @@ Public Class CurrComboMachiningParam
       If nIndex > 0 Then
          Dim DbMachining As Machining = Map.refMachiningDbVM.MachiningList.FirstOrDefault(Function(x) x.nIndex = nIndex)
          Select Case Type
-            Case Params.STRANDORDER, Params.DIRECTION
+            Case Params.SLICINGTYPE, Params.STRANDORDER, Params.DIRECTION
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.LINKTYPE, Params.LEADIN, Params.LEADOUT
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.LINK).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            'Case Params.LEADIN
-            '   m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.LEADIN).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            'Case Params.LEADOUT
-            '   m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.LEADOUT).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.RIBSTYPE
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.RIBS).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.AUXSOLIDSINFILL, Params.AUXSOLIDSSTRANDORDER, Params.AUXSOLIDSLINKTYPE
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
@@ -777,11 +769,16 @@ Public Class CurrComboMachiningParam
             m_SelValue = m_DbParam.OrigSelValue
             m_OrigSelValue = m_DbParam.OrigSelValue
          End If
+      ElseIf Type = Params.RIBSTYPE AndAlso Not bReadFromPart Then
+         m_OrigSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = Machining.MPAR_RIBSTYPE.INTERNAL)
+         m_SelValue = m_OrigSelValue
       End If
    End Sub
 
    Friend Overrides Sub WriteParamInPart(nPartId As Integer)
       Select Case Type
+         Case Params.SLICINGTYPE
+            EgtSetInfo(nPartId, MAC_SLICINGTYPE, m_SelValue.Id)
          Case Params.STRANDORDER
             EgtSetInfo(nPartId, MAC_STRANDORDER, m_SelValue.Id)
          Case Params.DIRECTION
@@ -792,6 +789,8 @@ Public Class CurrComboMachiningParam
             EgtSetInfo(nPartId, MAC_LEADIN, m_SelValue.Id)
          Case Params.LEADOUT
             EgtSetInfo(nPartId, MAC_LEADOUT, m_SelValue.Id)
+         Case Params.RIBSTYPE
+            EgtSetInfo(nPartId, MAC_RIBSTYPE, m_SelValue.Id)
          Case Params.AUXSOLIDSINFILL
             EgtSetInfo(nPartId, MAC_AUXSOLIDSINFILL, m_SelValue.Id)
          Case Params.AUXSOLIDSSTRANDORDER
@@ -807,6 +806,7 @@ Public Class CurrComboMachiningParam
 
    Friend Overrides Sub ResetParam()
       m_SelValue = m_OrigSelValue
+      NotifyPropertyChanged(NameOf(SelValue))
    End Sub
 
 #Region "COMMANDS"
@@ -868,15 +868,27 @@ Public Class CurrCheckMachiningParam
       MyBase.New(Type, nIndex)
       Dim bReadFromPart As Boolean = False
       Select Case Type
-         Case Params.SLICING45
-            bReadFromPart = EgtGetInfo(nPartId, MAC_SLICING45, m_bValue)
+         Case Params.SPIRALVASE
+            bReadFromPart = EgtGetInfo(nPartId, MAC_SPIRALVASE, m_bValue)
+         Case Params.RIBSLINK
+            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLINK, m_bValue)
+         Case Params.RIBSINVERTORDER
+            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSINVERTORDER, m_bValue)
+         Case Params.RIBSINVERTDIRECTION
+            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSINVERTDIRECTION, m_bValue)
+         Case Params.RIBSLEADININVERT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLEADININVERT, m_bValue)
+         Case Params.RIBSLEADOUTINVERT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLEADOUTINVERT, m_bValue)
       End Select
       m_bOrigValue = m_bValue
       If nIndex > 0 Then
          Dim DbMachining As Machining = Map.refMachiningDbVM.MachiningList.FirstOrDefault(Function(x) x.nIndex = nIndex)
          Select Case Type
-            Case Params.SLICING45
+            Case Params.SPIRALVASE
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.RIBSLINK, Params.RIBSINVERTORDER, Params.RIBSINVERTDIRECTION, Params.RIBSLEADININVERT, Params.RIBSLEADOUTINVERT
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.RIBS).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
          If bForceFromDb OrElse Not bReadFromPart Then
             m_bValue = m_DbParam.bOrigValue
@@ -887,8 +899,18 @@ Public Class CurrCheckMachiningParam
 
    Friend Overrides Sub WriteParamInPart(nPartId As Integer)
       Select Case Type
-         Case Params.SLICING45
-            EgtSetInfo(nPartId, MAC_SLICING45, If(m_bValue, 1, 0))
+         Case Params.SPIRALVASE
+            EgtSetInfo(nPartId, MAC_SPIRALVASE, If(m_bValue, 1, 0))
+         Case Params.RIBSLINK
+            EgtSetInfo(nPartId, MAC_RIBSLINK, If(m_bValue, 1, 0))
+         Case Params.RIBSINVERTORDER
+            EgtSetInfo(nPartId, MAC_RIBSINVERTORDER, If(m_bValue, 1, 0))
+         Case Params.RIBSINVERTDIRECTION
+            EgtSetInfo(nPartId, MAC_RIBSINVERTDIRECTION, If(m_bValue, 1, 0))
+         Case Params.RIBSLEADININVERT
+            EgtSetInfo(nPartId, MAC_RIBSLEADININVERT, If(m_bValue, 1, 0))
+         Case Params.RIBSLEADOUTINVERT
+            EgtSetInfo(nPartId, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0))
       End Select
    End Sub
 
@@ -898,6 +920,7 @@ Public Class CurrCheckMachiningParam
 
    Friend Overrides Sub ResetParam()
       m_bValue = m_bOrigValue
+      NotifyPropertyChanged(NameOf(bValue))
    End Sub
 
 #Region "COMMANDS"

Icarus/CurrMachiningPanel/CurrMachiningPanelVM.vb

@@ -79,6 +79,8 @@ Public Class CurrMachiningPanelVM
    End Property
 
    Public Sub Cancel()
+      ' ripristino i parametri modificati
+      m_CurrMachining.ResetModification()
       ' ripristino modalita' standard
       Map.refTopPanelVM.SelPage = Pages.MODIFY
    End Sub

Icarus/DispositionPanel/DispositionPanelV.xaml

@@ -1,17 +1,103 @@
-<StackPanel x:Class="DispositionPanelV"
+<Grid x:Class="DispositionPanelV"
             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
             xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
             xmlns:PrintApp="clr-namespace:Icarus"
+      VerticalAlignment="Stretch"
             Margin="5">
-   <StackPanel.Resources>
+   <Grid.Resources>
       <PrintApp:CenterToolTipConverter x:Key="CenterToolTipConverter"/>
-   </StackPanel.Resources>
+      <PrintApp:FromBooleanToVisibility x:Key="FromBooleanToVisibility"/>
+   </Grid.Resources>
+   <Grid.ColumnDefinitions>
+      <ColumnDefinition Width="Auto"/>
+      <ColumnDefinition Width="Auto"/>
+   </Grid.ColumnDefinitions>
+   <Grid.RowDefinitions>
+      <RowDefinition Height="1*"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="1*"/>
+   </Grid.RowDefinitions>
    <ToggleButton x:Name="MoveBtn" 
+                 Grid.Row="3"
                  Content="Move"
                  IsChecked="{Binding bMove_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=MoveBtn}"
+   <!--<Border Background="Red"
+           Grid.Column="1"
+           Grid.Row="1"
+           Grid.RowSpan="5"
+           Width="50"
+           VerticalAlignment="Stretch"/>-->
+
+   <Border x:Name="PopupBrd" 
+           Grid.Column="1"
+           Grid.Row="1"
+           Grid.RowSpan="5"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=MoveBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+         </Grid.RowDefinitions>
+         <Grid Margin="0,0,0,2.5">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="X"
+                          VerticalAlignment="Center"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding sXPos, UpdateSourceTrigger=Explicit}"
+                                      Grid.Column="1" 
+                                      Margin="5,0,0,0"
+                                      Style="{StaticResource LeftPanel_TextBox}"/>
+         </Grid>
+         <Grid Grid.Row="1"
+                  Margin="0,2.5,0,2.5">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="Y"
+                          VerticalAlignment="Center"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding sYPos, UpdateSourceTrigger=Explicit}"
+                                      Grid.Column="1" 
+                                      Margin="5,0,0,0"
+                                      Style="{StaticResource LeftPanel_TextBox}"/>
+         </Grid>
+         <Grid Grid.Row="2"
+                  Margin="0,2.5,0,0">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="Z"
+                          VerticalAlignment="Center"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding sZPos, UpdateSourceTrigger=Explicit}"
+                                      Grid.Column="1" 
+                                      Margin="5,0,0,0"
+                                      Style="{StaticResource LeftPanel_TextBox}"/>
+         </Grid>
+         <Grid Grid.Row="3"
+                  Margin="0,2.5,0,0">
+            <Button Content="Drag"
+                       Command="{Binding DragMove_Command}"
+                       Style="{StaticResource LeftPanel_TextButton}"/>
+         </Grid>
+      </Grid>
+   </Border>
+
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=MoveBtn}"
           PlacementTarget="{Binding ElementName=MoveBtn}"
           Style="{StaticResource LeftPanel_Popup}">
       <Border x:Name="PopupBrd" Style="{StaticResource LeftPanelPopup_Border}">
@@ -68,12 +154,62 @@
             </Grid>
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
+ 
    <ToggleButton x:Name="RotateBtn"
+                 Grid.Row="4"
                  Content="Rotate"
                  IsChecked="{Binding bRotate_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=RotateBtn}"
+   <!--<Border Background="Blue"
+           Grid.Column="2"
+           Grid.Row="2"
+           Grid.RowSpan="5"
+           Width="50"
+           VerticalAlignment="Stretch"
+           HorizontalAlignment="Stretch"/>-->
+
+   <Border Grid.Column="1"
+           Grid.Row="2"
+           Grid.RowSpan="5"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=RotateBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+         </Grid.RowDefinitions>
+         <UniformGrid Columns="3">
+            <RadioButton Content="X"
+                            GroupName="Axes"
+                            IsChecked="{Binding RotAxes[0]}"
+                            Style="{StaticResource ToolBar_ToggleButton}"/>
+            <RadioButton Content="Y"
+                            GroupName="Axes"
+                            IsChecked="{Binding RotAxes[1]}"
+                            Style="{StaticResource ToolBar_ToggleButton}"/>
+            <RadioButton Content="Z"
+                            GroupName="Axes"
+                            IsChecked="{Binding RotAxes[2]}"
+                            Style="{StaticResource ToolBar_ToggleButton}"/>
+         </UniformGrid>
+         <EgtWPFLib5:EgtTextBox Grid.Row="1"
+                                   Text="{Binding sRotAngle, UpdateSourceTrigger=Explicit}"
+                                   Margin="0,5,0,0"/>
+         <Grid Grid.Row="2"
+                  Margin="0,2.5,0,0">
+            <Button Content="Drag"
+                       Command="{Binding DragRotate_Command}"
+                       Style="{StaticResource LeftPanel_TextButton}"/>
+         </Grid>
+      </Grid>
+   </Border>
+
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=RotateBtn}"
           Grid.Column="1"
           PlacementTarget="{Binding ElementName=RotateBtn}"
           Style="{StaticResource LeftPanel_Popup}">
@@ -110,5 +246,5 @@
             </Grid>
          </Grid>
       </Border>
-   </Popup>
-</StackPanel>
+   </Popup>-->
+</Grid>

Icarus/DispositionPanel/DispositionPanelVM.vb

@@ -298,3 +298,19 @@ Public Class CenterToolTipConverter
    End Function
 
 End Class
+
+Public Class FromBooleanToVisibility
+   Implements IValueConverter
+
+   Public Function Convert(ByVal value As Object, ByVal targetType As Type, ByVal parameter As Object, ByVal culture As CultureInfo) As Object Implements IValueConverter.Convert
+      If IsNothing(value) OrElse TypeOf value IsNot Boolean Then
+         Return Visibility.Collapsed
+      End If
+      Return If(CBool(value), Visibility.Visible, Visibility.Collapsed)
+   End Function
+
+   Public Function ConvertBack(ByVal value As Object, ByVal targetType As Type, ByVal parameter As Object, ByVal culture As CultureInfo) As Object Implements IValueConverter.ConvertBack
+      Throw New NotSupportedException()
+   End Function
+
+End Class

Icarus/Icarus.vbproj

@@ -123,11 +123,6 @@
       <DependentUpon>DispositionPanelV.xaml</DependentUpon>
     </Compile>
     <Compile Include="DispositionPanel\DispositionPanelVM.vb" />
-    <Compile Include="ImportPanel\ImportPanelV.xaml.vb">
-      <DependentUpon>ImportPanelV.xaml</DependentUpon>
-    </Compile>
-    <Compile Include="ImportPanel\ImportPanelVM.vb" />
-    <Compile Include="ImportPanel\ImportUtility.vb" />
     <Compile Include="InstrumentPanel\InstrumentPanelV.xaml.vb">
       <DependentUpon>InstrumentPanelV.xaml</DependentUpon>
     </Compile>
@@ -154,11 +149,24 @@
       <DependentUpon>MachSaveInDbWindowV.xaml</DependentUpon>
     </Compile>
     <Compile Include="MachSaveInDbWnd\MachSaveInDbWndVM.vb" />
+    <Compile Include="ManagePartPanel\ManagePartPanelV.xaml.vb">
+      <DependentUpon>ManagePartPanelV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="ManagePartPanel\ManagePartPanelVM.vb" />
+    <Compile Include="ManagePartPanel\ManagePartUtility.vb" />
     <Compile Include="MaterialDb\Material.vb" />
     <Compile Include="MaterialDb\MaterialDbV.xaml.vb">
       <DependentUpon>MaterialDbV.xaml</DependentUpon>
     </Compile>
     <Compile Include="MaterialDb\MaterialDbVM.vb" />
+    <Compile Include="OptionsWindow\MachineBox.xaml.vb">
+      <DependentUpon>MachineBox.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="OptionsWindow\OptionModule.vb" />
+    <Compile Include="OptionsWindow\OptionWindowV.xaml.vb">
+      <DependentUpon>OptionWindowV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="OptionsWindow\OptionWindowVM.vb" />
     <Compile Include="Project\ProjectV.xaml.vb">
       <DependentUpon>ProjectV.xaml</DependentUpon>
     </Compile>
@@ -227,6 +235,9 @@
     </Compile>
     <Compile Include="Special-3dPrinting\Printing3DPanelVM.vb" />
     <Compile Include="Special-3dPrinting\Printing3DUtility.vb" />
+    <Compile Include="SplashScreen\SplashScreen.xaml.vb">
+      <DependentUpon>SplashScreen.xaml</DependentUpon>
+    </Compile>
     <Compile Include="StartMachPanel\StartMachPanelV.xaml.vb">
       <DependentUpon>StartMachPanelV.xaml</DependentUpon>
     </Compile>
@@ -249,6 +260,7 @@
     </Compile>
     <Compile Include="Utility\DisableModifiedMgr.vb" />
     <Compile Include="Utility\EgwCrypto.vb" />
+    <Compile Include="Utility\GeomEntityColors.vb" />
     <Compile Include="Utility\LuaExec.vb" />
     <Compile Include="Utility\Map.vb" />
     <Compile Include="Utility\MyMachine.vb" />
@@ -287,10 +299,6 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
-    <Page Include="ImportPanel\ImportPanelV.xaml">
-      <SubType>Designer</SubType>
-      <Generator>MSBuild:Compile</Generator>
-    </Page>
     <Page Include="InstrumentPanel\InstrumentPanelV.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -331,10 +339,22 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="ManagePartPanel\ManagePartPanelV.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </Page>
     <Page Include="MaterialDb\MaterialDbV.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="OptionsWindow\MachineBox.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </Page>
+    <Page Include="OptionsWindow\OptionWindowV.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </Page>
     <Page Include="Project\ProjectV.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -403,6 +423,10 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="SplashScreen\SplashScreen.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="StartMachPanel\StartMachPanelV.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -607,6 +631,12 @@
   <ItemGroup>
     <Resource Include="Resources\TopPanel\Edit.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\SplashScreen\GoldSplashscreen.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\SplashScreen\LogoEgalware.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x64" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\Icarus\IcarusR64.exe

Icarus/ImportPanel/ImportPanelV.xaml

@@ -14,7 +14,7 @@
          <RowDefinition Height="Auto"/>
       </Grid.RowDefinitions>
       <Border Style="{StaticResource LeftPanelTitle_Border}">
-         <TextBlock Text="Lista nuovi pezzi"
+         <TextBlock Text="New part list"
                     FontWeight="DemiBold"
                     FontSize="14"/>
       </Border>
@@ -70,7 +70,7 @@
       </TreeView>
       <Border Grid.Row="3"
               Style="{StaticResource LeftPanelTitle_Border}">
-         <TextBlock Text="Lista entità importate"
+         <TextBlock Text="Imported entity list"
                     FontWeight="DemiBold"
                     FontSize="14"/>
       </Border>

Icarus/ImportPanel/ImportPanelVM.vb

@@ -224,7 +224,8 @@ Public Class ImportPanelVM
          Return
       Else
          ' Creo pezzi e layer necessari
-         For Each ImportPart In m_ImportPartList
+         For ImportPartIndex = 0 To m_ImportPartList.Count - 1
+            Dim ImportPart As ImportPart = m_ImportPartList(ImportPartIndex)
             Dim frImportedPart As New Frame3d
             EgtGetGroupGlobFrame(m_nImportedPartId, frImportedPart)
             Dim nPartId As Integer = EgtCreateGroup(GDB_ID.ROOT, frImportedPart)
@@ -238,6 +239,7 @@ Public Class ImportPanelVM
             Dim nShellNumberLayerId As Integer = GDB_ID.NULL
             Dim nAuxSolidsLayerId As Integer = GDB_ID.NULL
             Dim nMachStartLayerId As Integer = GDB_ID.NULL
+            Dim nOthersLayerId As Integer = GDB_ID.NULL
             For Each ImportLayer In ImportPart.LayerList
                Select Case ImportLayer.Type
                   Case ImportLayer.LayerType.PRINT_SOLID
@@ -322,11 +324,25 @@ Public Class ImportPanelVM
                         EgtSetColor(GeomEntity.nId, c3LightBlue)
                      Next
                   Case ImportLayer.LayerType.OTHERS
-                     Dim nOthersLayerId As Integer = EgtCreateGroup(nPartId)
+                     nOthersLayerId = EgtCreateGroup(nPartId)
                      EgtSetName(nOthersLayerId, LAY_OTHERS)
                      For Each GeomEntity In ImportLayer.EntityList
                         EgtRelocateGlob(GeomEntity.nId, nOthersLayerId, GDB_POS.LAST_SON)
                      Next
+                     If ImportPartIndex = 0 Then
+                        For Each GeomEntity In ImportedEntityList
+                           ' se curva
+                           Dim EntityType As GDB_TY = EgtGetType(GeomEntity.nId)
+                           Select Case EntityType
+                              Case GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
+                                 '  la trasformo in curva compo
+                                 EgtCreateCurveCompo(nOthersLayerId, GeomEntity.nId, True)
+                              Case Else
+                                 ' altrimenti la sposto solamente
+                                 EgtRelocateGlob(GeomEntity.nId, nOthersLayerId, GDB_POS.LAST_SON)
+                           End Select
+                        Next
+                     End If
                End Select
             Next
             ' aggiungo riferimento
@@ -365,13 +381,13 @@ Public Class ImportPanelVM
             End If
             EgtSetInfo(nReferenceLayerId, KEY_REFERENCE, PrintSolidEntity.Reference)
             ' appoggio il pezzo sulla tavola
-            EgtMove( nPartId, New Vector3d(0, 0, -b3PrintSolid.Min.z))
+            EgtMove(nPartId, New Vector3d(0, 0, -b3PrintSolid.Min.z))
             ' lo aggiungo a lista pezzi 
             Dim sFilePath As String = ""
             EgtGetInfo(m_nImportedPartId, FILE_PATH, sFilePath)
             EgtSetInfo(nPartId, FILE_PATH, sFilePath)
             EgtSetInfo(nPartId, "PartOnTable", 1)
-            Dim NewPart As New Print3dPartVM(nPartId, nPrintPartLayerId, PrintSolidEntity.nId, nOriginalPartLayerId, nReferenceLayerId, nFrameId, nMachStartLayerId, nRibsLayerId, nShellNumberLayerId, nAuxSolidsLayerId, sFilePath)
+            Dim NewPart As New Print3dPartVM(nPartId, nPrintPartLayerId, PrintSolidEntity.nId, nOriginalPartLayerId, nReferenceLayerId, nFrameId, nMachStartLayerId, nRibsLayerId, nShellNumberLayerId, nAuxSolidsLayerId, nOthersLayerId, sFilePath)
             Map.refTopPanelVM.PartList.Add(NewPart)
          Next
       End If

Icarus/LeftPanel/LeftPanelV.xaml

@@ -1,9 +1,9 @@
 <UserControl x:Class="LeftPanelV"
-            xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-            xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-            xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
-            xmlns:PrintApp="clr-namespace:Icarus"
-            Margin="5">
+               xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+               xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+               xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+               xmlns:PrintApp="clr-namespace:Icarus"
+               Margin="5">
    <TabControl SelectedIndex="{Binding SelPanel}"
                Background="Transparent"
                BorderThickness="0">
@@ -15,7 +15,8 @@
       <TabItem Header="NULL">
       </TabItem>
       <TabItem Header="IMPORT">
-         <PrintApp:ImportPanelV DataContext="{StaticResource ImportPanelVM}"/>
+         <!--<PrintApp:ImportPanelV DataContext="{StaticResource ImportPanelVM}"/>-->
+         <PrintApp:ManagePartPanelV DataContext="{StaticResource ManagePartPanelVM}"/>
       </TabItem>
       <TabItem Header="DISPOSITION">
          <PrintApp:DispositionPanelV DataContext="{StaticResource DispositionPanelVM}"/>
@@ -36,7 +37,8 @@
          <Button Height="100"/>
       </TabItem>
       <TabItem Header="MODIFYPART">
-         <PrintApp:ImportPanelV DataContext="{StaticResource ImportPanelVM}"/>
+         <!--<PrintApp:ModifyPartPanelV DataContext="{StaticResource ModifyPartPanelVM}"/>-->
+         <PrintApp:ManagePartPanelV DataContext="{StaticResource ManagePartPanelVM}"/>
       </TabItem>
    </TabControl>
    

Icarus/LeftPanel/LeftPanelVM.vb

@@ -54,6 +54,9 @@ Public Class LeftPanelVM
             Map.refRibPanelVM.Init()
          Case Panels.SHELLNUMBER
             Map.refShellNumberPanelVM.Init()
+         Case Panels.MODIFYPART
+            ''Map.refModifyPartPanelVM.Init()
+            Map.refManagePartPanelVM.Init(ManagePartPanelVM.ManagePartType.MODIFY)
       End Select
       Map.refViewLayerManagerVM.UpdateForced()
       NotifyPropertyChanged(NameOf(SelPanel))

Icarus/MachiningDb/Machining.vb

@@ -6,6 +6,12 @@ Imports EgtWPFLib5
 Public Class Machining
    Inherits VMBase
 
+   Public Enum MPAR_SLICINGTYPE As Integer
+      VERTICAL = 1
+      DEG45 = 2
+      HORIZONTAL = 3
+   End Enum
+
    Public Enum MPAR_STRANDORDERS As Integer
       OUTTOIN = 1
       INTOOUT = 2
@@ -28,6 +34,12 @@ Public Class Machining
       ARC = 3
    End Enum
 
+   Public Enum MPAR_RIBSTYPE As Integer
+      INTERNAL = 1
+      EXTERNAL = 2
+      UNBOUNDED = 3
+   End Enum
+
    Public Enum MPAR_INFILL As Integer
       NONE = 1
       OFFSET = 2
@@ -48,7 +60,7 @@ Public Class Machining
       End Get
    End Property
    Friend Sub UpdateIsModified()
-      m_bIsModified = m_CathegoryList.Any(Function(x) x.MachiningParamList.Any(Function(y) y.bIsModified))
+      m_bIsModified = m_CathegoryList.Any(Function(x) x.MachiningParamList.Any(Function(y) y.bIsModified)) OrElse bIsModifiedName
       NotifyPropertyChanged(NameOf(ghName))
    End Sub
 
@@ -69,6 +81,7 @@ Public Class Machining
       End Set
    End Property
 
+   Private m_sOrigName As String = ""
    Protected m_sName As String = ""
    Public Property sName As String
       Get
@@ -77,7 +90,8 @@ Public Class Machining
       Set(value As String)
          m_sName = value
          Map.refMachiningDbVM.SetNameVisibility(False)
-         NotifyPropertyChanged(NameOf(ghName))
+         UpdateIsModified()
+         Map.refMachiningDbVM.SetIsEnabled(True)
       End Set
    End Property
    Public ReadOnly Property ghName As String
@@ -85,6 +99,11 @@ Public Class Machining
          Return m_sName & If(m_bIsModified, "*", "")
       End Get
    End Property
+   Public ReadOnly Property bIsModifiedName As Boolean
+      Get
+         Return m_sName <> m_sOrigName
+      End Get
+   End Property
 
    Sub New()
    End Sub
@@ -98,13 +117,9 @@ Public Class Machining
          m_sGUID = Guid.NewGuid.ToString()
          m_sName = "PrintingParam"
       End If
+      m_sOrigName = m_sName
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.GENERAL, nIndex))
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.LINK, nIndex))
-      'm_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.LEADIN, nIndex))
-      'm_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.LEADOUT, nIndex))
-      'm_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.COASTING, nIndex))
-      'm_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.WIPE, nIndex))
-      'm_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.TOOL, nIndex))
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.RIBS, nIndex))
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.SHELL_NUMBER, nIndex))
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.AUX_SOLID, nIndex))
@@ -116,13 +131,6 @@ Public Class Machining
       Next
    End Sub
 
-   'Sub New(nIndex As Integer, sGUID As String, sName As String)
-   '   m_nIndex = nIndex
-   '   m_sName = sName
-   '   m_sGUID = sGUID
-   '   ReadAllParams()
-   'End Sub
-
    Sub New(sName As String, bSlicing45 As Boolean, dStrandH As Double, dStrandW As Double, nStrandCount As Integer, dOffset As Double, dStartPointOffsetOnSlice As Double,
            dStrandOrder As MPAR_STRANDORDERS, dDirection As MPAR_DIRECTIONS, dLinkType As MPAR_LINKTYPES, dLinkParam As Double, dLinkZup As Double, dOffsetLeadPoint As Double,
            dLeadIn As MPAR_LEADINOUT, dLeadInTangDist As Double, dLeadInOrthoDist As Double, dLeadOut As MPAR_LEADINOUT, dLeadOutTangDist As Double, dLeadOutOrthoDist As Double,
@@ -133,45 +141,14 @@ Public Class Machining
 
    End Sub
 
-   'Private Sub ReadAllParams()
-   '   m_bSlicing45 = ReadMachiningParamDouble(m_nIndex, MAC_SLICING45, 0)
-   '   m_dStrandH = ReadMachiningParamDouble(m_nIndex, MAC_STRANDH, 0)
-   '   m_dStrandW = ReadMachiningParamDouble(m_nIndex, MAC_STRANDW, 0)
-   '   m_nStrandCount = ReadMachiningParamDouble(m_nIndex, MAC_STRANDCOUNT, 0)
-   '   m_dOffset = ReadMachiningParamDouble(m_nIndex, MAC_OFFSET, 0)
-   '   m_dStartPointOffsetOnSlice = ReadMachiningParamDouble(m_nIndex, MAC_STARTPOINTOFFSETONSLICE, 0)
-   '   m_dStrandOrder = ReadMachiningParamDouble(m_nIndex, MAC_STRANDORDER, 0)
-   '   m_dDirection = ReadMachiningParamDouble(m_nIndex, MAC_DIRECTION, 0)
-   '   m_dLinkType = ReadMachiningParamDouble(m_nIndex, MAC_LINKTYPE, 0)
-   '   m_dLinkParam = ReadMachiningParamDouble(m_nIndex, MAC_LINKPARAM, 0)
-   '   m_dLinkZup = ReadMachiningParamDouble(m_nIndex, MAC_LINKZUP, 0)
-   '   m_dOffsetLeadPoint = ReadMachiningParamDouble(m_nIndex, MAC_OFFSETLEADPOINT, 0)
-   '   m_dLeadIn = ReadMachiningParamDouble(m_nIndex, MAC_LEADIN, 0)
-   '   m_dLeadInTangDist = ReadMachiningParamDouble(m_nIndex, MAC_LEADINTANGDIST, 0)
-   '   m_dLeadInOrthoDist = ReadMachiningParamDouble(m_nIndex, MAC_LEADINORTHODIST, 0)
-   '   m_dLeadOut = ReadMachiningParamDouble(m_nIndex, MAC_LEADOUT, 0)
-   '   m_dLeadOutTangDist = ReadMachiningParamDouble(m_nIndex, MAC_LEADOUTTANGDIST, 0)
-   '   m_dLeadOutOrthoDist = ReadMachiningParamDouble(m_nIndex, MAC_LEADOUTORTHODIST, 0)
-   '   m_dCoastingLen = ReadMachiningParamDouble(m_nIndex, MAC_COASTINGLEN, 0)
-   '   m_dCoastingFeed = ReadMachiningParamDouble(m_nIndex, MAC_COASTINGFEED, 0)
-   '   m_dWipeLen = ReadMachiningParamDouble(m_nIndex, MAC_WIPELEN, 0)
-   '   m_dWipeFeedPu = ReadMachiningParamDouble(m_nIndex, MAC_WIPEFEEDPU, 0)
-   '   m_dFloorCount = ReadMachiningParamDouble(m_nIndex, MAC_FLOORCOUNT, 0)
-   '   m_dG0Feed = ReadMachiningParamDouble(m_nIndex, MAC_G0FEED, 0)
-   '   m_dToolDiam = ReadMachiningParamDouble(m_nIndex, MAC_TOOLDIAM, 0)
-   '   m_dRibsOverlap = ReadMachiningParamDouble(m_nIndex, MAC_RIBSOVERLAP, 0)
-   '   m_dRibsStrandCount = ReadMachiningParamDouble(m_nIndex, MAC_RIBSSTRANDCOUNT, 0)
-   '   m_dRibsLink = ReadMachiningParamDouble(m_nIndex, MAC_RIBSLINK, 0)
-   '   m_dRibsInvertOrder = ReadMachiningParamDouble(m_nIndex, MAC_RIBSINVERTORDER, 0)
-   '   m_dRibsInvertDirection = ReadMachiningParamDouble(m_nIndex, MAC_RIBSINVERTDIRECTION, 0)
-   '   m_dRibsLeadInInvert = ReadMachiningParamDouble(m_nIndex, MAC_RIBSLEADININVERT, 0)
-   '   m_dRibsLeadInLen = ReadMachiningParamDouble(m_nIndex, MAC_RIBSLEADINLEN, 0)
-   '   m_dRibsLeadOutInvert = ReadMachiningParamDouble(m_nIndex, MAC_RIBSLEADOUTINVERT, 0)
-   '   m_dRibsLeadOutLen = ReadMachiningParamDouble(m_nIndex, MAC_RIBSLEADOUTLEN, 0)
-   '   m_dRibsLeadOutCoasting = ReadMachiningParamDouble(m_nIndex, MAC_RIBSLEADOUTCOASTING, 0)
-   '   m_dRibsLeadOutWipe = ReadMachiningParamDouble(m_nIndex, MAC_RIBSLEADOUTWIPE, 0)
-   '   m_dRibsLeadOutWipeDir = ReadMachiningParamDouble(m_nIndex, MAC_RIBSLEADOUTWIPEDIR, 0)
-   'End Sub
+   Private Sub SaveName()
+      m_sOrigName = m_sName
+   End Sub
+
+   Private Sub ResetName()
+      m_sName = m_sOrigName
+      NotifyPropertyChanged(NameOf(ghName))
+   End Sub
 
    Friend Sub Save()
       If bIsModified Then
@@ -185,15 +162,17 @@ Public Class Machining
    End Sub
 
    Private Sub SaveParams()
+      SaveName()
       For Each Cathegory In m_CathegoryList
          Cathegory.SaveParams()
       Next
    End Sub
 
    Friend Sub ResetModification()
+      ResetName()
       If bIsModified Then
          ' annullo le modifiche di tutti i parametri
-         SaveParams()
+         ResetParams()
          ' resetto stato di modificata
          UpdateIsModified()
       End If
@@ -216,8 +195,7 @@ Public Class Machining
    Friend Overridable Sub OnMachiningParamPropertyChanged(sender As Object, e As PropertyChangedEventArgs)
       Select Case e.PropertyName
          Case NameOf(sender.dValue), NameOf(sender.sValue), NameOf(sender.bValue), NameOf(sender.SelValue)
-            m_bIsModified = m_CathegoryList.Any(Function(x) x.MachiningParamList.Any(Function(y) y.bIsModified))
-            NotifyPropertyChanged(NameOf(ghName))
+            UpdateIsModified()
       End Select
    End Sub
 
@@ -267,11 +245,6 @@ Public Class MachiningCathegory
    Public Enum Cathegories As Integer
       GENERAL = 1
       LINK = 2
-      'LEADIN = 3
-      'LEADOUT = 4
-      'COASTING = 5
-      'WIPE = 6
-      'TOOL = 7
       RIBS = 8
       SHELL_NUMBER = 9
       AUX_SOLID = 10
@@ -318,17 +291,20 @@ Public Class MachiningCathegory
       Select Case m_Type
          Case Cathegories.GENERAL
             m_sName = "General"
-            m_MachiningParamList = New List(Of MachiningParam)({New CheckMachiningParam(MachiningParam.Params.SLICING45, nIndex),
+            m_MachiningParamList = New List(Of MachiningParam)({New ComboMachiningParam(MachiningParam.Params.SLICINGTYPE, nIndex),
+                                                                New CheckMachiningParam(MachiningParam.Params.SPIRALVASE, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.STRANDH, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.STRANDW, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.STRANDCOUNT, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.OFFSET, nIndex),
+                                                                New NumericMachiningParam(MachiningParam.Params.STRANDOVERLAP, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.STARTPOINTOFFSETONSLICE, nIndex),
                                                                 New ComboMachiningParam(MachiningParam.Params.STRANDORDER, nIndex),
                                                                 New ComboMachiningParam(MachiningParam.Params.DIRECTION, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.G0FEED, nIndex),
-                                                                New NumericMachiningParam(MachiningParam.Params.TOOLDIAM, nIndex)})
+                                                                New NumericMachiningParam(MachiningParam.Params.TOOLDIAM, nIndex),
+                                                                New NumericMachiningParam(MachiningParam.Params.FLOWRATE_PC, nIndex)})
          Case Cathegories.LINK
             m_sName = "Shell"
             m_MachiningParamList = New List(Of MachiningParam)({New ComboMachiningParam(MachiningParam.Params.LINKTYPE, nIndex),
@@ -342,41 +318,21 @@ Public Class MachiningCathegory
                                                                 New NumericMachiningParam(MachiningParam.Params.LEADOUTTANGDIST, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.LEADOUTORTHODIST, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.COASTINGLEN, nIndex),
-                                                                New NumericMachiningParam(MachiningParam.Params.COASTINGFEED, nIndex),
+                                                                New NumericMachiningParam(MachiningParam.Params.COASTINGFEED_PC, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.WIPELEN, nIndex),
-                                                                New NumericMachiningParam(MachiningParam.Params.WIPEFEEDPU, nIndex)})
-         'Case Cathegories.LEADIN
-         '   m_sName = "Lead In"
-         '   m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.OFFSETLEADPOINT, nIndex),
-         '                                                       New ComboMachiningParam(MachiningParam.Params.LEADIN, nIndex),
-         '                                                       New NumericMachiningParam(MachiningParam.Params.LEADINTANGDIST, nIndex),
-         '                                                       New NumericMachiningParam(MachiningParam.Params.LEADINORTHODIST, nIndex)})
-         'Case Cathegories.LEADOUT
-         '   m_sName = "Lead Out"
-         '   m_MachiningParamList = New List(Of MachiningParam)({New ComboMachiningParam(MachiningParam.Params.LEADOUT, nIndex),
-         '                                                       New NumericMachiningParam(MachiningParam.Params.LEADOUTTANGDIST, nIndex),
-         '                                                       New NumericMachiningParam(MachiningParam.Params.LEADOUTORTHODIST, nIndex)})
-         'Case Cathegories.COASTING
-         '   m_sName = "Coasting"
-         '   m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.COASTINGLEN, nIndex),
-         '                                                       New NumericMachiningParam(MachiningParam.Params.COASTINGFEED, nIndex)})
-         'Case Cathegories.WIPE
-         '   m_sName = "Wipe"
-         '   m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.WIPELEN, nIndex),
-         '                                                       New NumericMachiningParam(MachiningParam.Params.WIPEFEEDPU, nIndex)})
-         'Case Cathegories.TOOL
-         '   m_sName = "Tool"
-         '   m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.TOOLDIAM, nIndex)})
+                                                                New NumericMachiningParam(MachiningParam.Params.WIPEFEED_PC, nIndex),
+                                                                New NumericMachiningParam(MachiningParam.Params.WIPEDIR, nIndex)})
          Case Cathegories.RIBS
             m_sName = "Ribs"
-            m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nIndex),
+            m_MachiningParamList = New List(Of MachiningParam)({New ComboMachiningParam(MachiningParam.Params.RIBSTYPE, nIndex),
+                                                                New NumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.RIBSSTRANDCOUNT, nIndex),
-                                                                New NumericMachiningParam(MachiningParam.Params.RIBSLINK, nIndex),
-                                                                New NumericMachiningParam(MachiningParam.Params.RIBSINVERTORDER, nIndex),
-                                                                New NumericMachiningParam(MachiningParam.Params.RIBSINVERTDIRECTION, nIndex),
-                                                                New NumericMachiningParam(MachiningParam.Params.RIBSLEADININVERT, nIndex),
+                                                                New CheckMachiningParam(MachiningParam.Params.RIBSLINK, nIndex),
+                                                                New CheckMachiningParam(MachiningParam.Params.RIBSINVERTORDER, nIndex),
+                                                                New CheckMachiningParam(MachiningParam.Params.RIBSINVERTDIRECTION, nIndex),
+                                                                New CheckMachiningParam(MachiningParam.Params.RIBSLEADININVERT, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.RIBSLEADINLEN, nIndex),
-                                                                New NumericMachiningParam(MachiningParam.Params.RIBSLEADOUTINVERT, nIndex),
+                                                                New CheckMachiningParam(MachiningParam.Params.RIBSLEADOUTINVERT, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.RIBSLEADOUTLEN, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.RIBSLEADOUTCOASTING, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.RIBSLEADOUTWIPE, nIndex),
@@ -438,7 +394,7 @@ Public MustInherit Class MachiningParam
 
    Public Enum Params As Integer
       NAME = 2
-      SLICING45 = 3
+      SLICINGTYPE = 3
       STRANDH = 4
       STRANDW = 5
       STRANDCOUNT = 6
@@ -457,37 +413,42 @@ Public MustInherit Class MachiningParam
       LEADOUTTANGDIST = 19
       LEADOUTORTHODIST = 20
       COASTINGLEN = 21
-      COASTINGFEED = 22
+      COASTINGFEED_PC = 22
       WIPELEN = 23
-      WIPEFEEDPU = 24
+      WIPEFEED_PC = 24
       FLOORCOUNT = 25
       G0FEED = 26
       TOOLDIAM = 27
-      RIBSOVERLAP = 28
-      RIBSSTRANDCOUNT = 29
-      RIBSLINK = 30
-      RIBSINVERTORDER = 31
-      RIBSINVERTDIRECTION = 32
-      RIBSLEADININVERT = 33
-      RIBSLEADINLEN = 34
-      RIBSLEADOUTINVERT = 35
-      RIBSLEADOUTLEN = 36
-      RIBSLEADOUTCOASTING = 37
-      RIBSLEADOUTWIPE = 38
-      RIBSLEADOUTWIPEDIR = 39
-      SHELLNBRDIFFERENCE = 40
-      SHELLNBRCOASTING = 41
-      SHELLNBRWIPE = 42
-      SHELLNBRWIPEDIR = 43
-      AUXSOLIDSOVERLAP = 44
-      AUXSOLIDSINFILL = 45
-      AUXSOLIDSSTRANDORDER = 46
-      AUXSOLIDSLINKTYPE = 47
-      AUXSOLIDSLINKPARAM = 48
-      AUXSOLIDSSTARTPOINTOFFSETONSLICE = 49
-      AUXSOLIDSCOASTINGLEN = 50
-      AUXSOLIDSWIPELEN = 51
-      AUXSOLIDSWIPEDIR = 52
+      RIBSTYPE = 28
+      RIBSOVERLAP = 29
+      RIBSSTRANDCOUNT = 30
+      RIBSLINK = 31
+      RIBSINVERTORDER = 32
+      RIBSINVERTDIRECTION = 33
+      RIBSLEADININVERT = 34
+      RIBSLEADINLEN = 35
+      RIBSLEADOUTINVERT = 36
+      RIBSLEADOUTLEN = 37
+      RIBSLEADOUTCOASTING = 38
+      RIBSLEADOUTWIPE = 39
+      RIBSLEADOUTWIPEDIR = 40
+      SHELLNBRDIFFERENCE = 41
+      SHELLNBRCOASTING = 42
+      SHELLNBRWIPE = 43
+      SHELLNBRWIPEDIR = 44
+      AUXSOLIDSOVERLAP = 45
+      AUXSOLIDSINFILL = 46
+      AUXSOLIDSSTRANDORDER = 47
+      AUXSOLIDSLINKTYPE = 48
+      AUXSOLIDSLINKPARAM = 49
+      AUXSOLIDSSTARTPOINTOFFSETONSLICE = 50
+      AUXSOLIDSCOASTINGLEN = 51
+      AUXSOLIDSWIPELEN = 52
+      AUXSOLIDSWIPEDIR = 53
+      SPIRALVASE = 54
+      WIPEDIR = 55
+      STRANDOVERLAP = 56
+      FLOWRATE_PC = 57
       MATERIALS = 100
    End Enum
 
@@ -510,8 +471,8 @@ Public MustInherit Class MachiningParam
    Sub New(Type As Params)
       m_Type = Type
       Select Case m_Type
-         Case Params.SLICING45
-            m_sName = "Slicing 45°"
+         Case Params.SLICINGTYPE
+            m_sName = "Slicing direction"
          Case Params.STRANDH
             m_sName = "Strand Height"
          Case Params.STRANDW
@@ -548,20 +509,22 @@ Public MustInherit Class MachiningParam
             m_sName = "Lead Out Ortho Dist"
          Case Params.COASTINGLEN
             m_sName = "Coasting Len"
-         Case Params.COASTINGFEED
-            m_sName = "Coasting Feed"
+         Case Params.COASTINGFEED_PC
+            m_sName = "Coasting Feed [%]"
          Case Params.WIPELEN
             m_sName = "Wipe Len"
-         Case Params.WIPEFEEDPU
-            m_sName = "Wipe Feed Pu"
+         Case Params.WIPEFEED_PC
+            m_sName = "Wipe Feed [%]"
          Case Params.FLOORCOUNT
             m_sName = "Floor Count"
          Case Params.G0FEED
             m_sName = "G0 Feed"
          Case Params.TOOLDIAM
             m_sName = "Nozzle Diameter"
+         Case Params.RIBSTYPE
+            m_sName = "Type"
          Case Params.RIBSOVERLAP
-            m_sName = "Overlap"
+            m_sName = "Overlap [%]"
          Case Params.RIBSSTRANDCOUNT
             m_sName = "Strand Count"
          Case Params.RIBSLINK
@@ -583,7 +546,7 @@ Public MustInherit Class MachiningParam
          Case Params.RIBSLEADOUTWIPE
             m_sName = "Lead Out Wipe"
          Case Params.RIBSLEADOUTWIPEDIR
-            m_sName = "Lead Out Wipe Dir"
+            m_sName = "Lead Out Wipe Dir [deg]"
          Case Params.SHELLNBRDIFFERENCE
             m_sName = "Difference"
          Case Params.SHELLNBRCOASTING
@@ -591,9 +554,9 @@ Public MustInherit Class MachiningParam
          Case Params.SHELLNBRWIPE
             m_sName = "Wipe"
          Case Params.SHELLNBRWIPEDIR
-            m_sName = "Wipe Direction"
+            m_sName = "Wipe Direction [deg]"
          Case Params.AUXSOLIDSOVERLAP
-            m_sName = "Overlap"
+            m_sName = "Overlap [%]"
          Case Params.AUXSOLIDSINFILL
             m_sName = "Infill"
          Case Params.AUXSOLIDSSTRANDORDER
@@ -609,7 +572,15 @@ Public MustInherit Class MachiningParam
          Case Params.AUXSOLIDSWIPELEN
             m_sName = "Wipe Length"
          Case Params.AUXSOLIDSWIPEDIR
-            m_sName = "Wipe Direction"
+            m_sName = "Wipe Direction [deg]"
+         Case Params.SPIRALVASE
+            m_sName = "Spiral Vase"
+         Case Params.WIPEDIR
+            m_sName = "Wipe Direction [deg]"
+         Case Params.STRANDOVERLAP
+            m_sName = "Strand Overlap [%]"
+         Case Params.FLOWRATE_PC
+            m_sName = "Flow rate [%]"
       End Select
    End Sub
 
@@ -639,13 +610,13 @@ Public Class NumericMachiningParam
    End Property
    Public Overridable Property sValue As String
       Get
-         Return If(m_bIsLen, LenToString(m_dValue, 1), m_dValue)
+         Return If(m_bIsLen, LenToString(m_dValue, 1), DoubleToString( m_dValue, 2))
       End Get
       Set(value As String)
          If m_bIsLen Then
             StringToLen(value, m_dValue)
          Else
-            m_dValue = value
+            StringToDouble( value, m_dValue)
          End If
          NotifyPropertyChanged(NameOf(sValue))
       End Set
@@ -687,6 +658,9 @@ Public Class NumericMachiningParam
             Case Params.OFFSET
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_OFFSET, 0)
                m_bIsLen = True
+            Case Params.STRANDOVERLAP
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_STRANDOVERLAP, 0)
+               m_bIsLen = True
             Case Params.STARTPOINTOFFSETONSLICE
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_STARTPOINTOFFSETONSLICE, 0)
                m_bIsLen = True
@@ -714,18 +688,21 @@ Public Class NumericMachiningParam
             Case Params.COASTINGLEN
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_COASTINGLEN, 0)
                m_bIsLen = True
-            Case Params.COASTINGFEED
-               m_dValue = ReadMachiningParamDouble(nIndex, MAC_COASTINGFEED, 0)
-               m_bIsLen = True
+            Case Params.COASTINGFEED_PC
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_COASTINGFEEDPU, 0)
+               m_bIsLen = False
             Case Params.WIPELEN
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_WIPELEN, 0)
                m_bIsLen = True
-            Case Params.WIPEFEEDPU
+            Case Params.WIPEFEED_PC
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_WIPEFEEDPU, 0)
+               m_bIsLen = False
+            Case Params.WIPEDIR
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_WIPEDIR, 0)
                m_bIsLen = True
             Case Params.FLOORCOUNT
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_FLOORCOUNT, 0)
-               m_bIsLen = True
+               m_bIsLen = False
             Case Params.G0FEED
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_G0FEED, 0)
                m_bIsLen = True
@@ -738,24 +715,9 @@ Public Class NumericMachiningParam
             Case Params.RIBSSTRANDCOUNT
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_RIBSSTRANDCOUNT, 0)
                m_bIsLen = True
-            Case Params.RIBSLINK
-               m_dValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLINK, 0)
-               m_bIsLen = True
-            Case Params.RIBSINVERTORDER
-               m_dValue = ReadMachiningParamDouble(nIndex, MAC_RIBSINVERTORDER, 0)
-               m_bIsLen = True
-            Case Params.RIBSINVERTDIRECTION
-               m_dValue = ReadMachiningParamDouble(nIndex, MAC_RIBSINVERTDIRECTION, 0)
-               m_bIsLen = True
-            Case Params.RIBSLEADININVERT
-               m_dValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLEADININVERT, 0)
-               m_bIsLen = True
             Case Params.RIBSLEADINLEN
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLEADINLEN, 0)
                m_bIsLen = True
-            Case Params.RIBSLEADOUTINVERT
-               m_dValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLEADOUTINVERT, 0)
-               m_bIsLen = True
             Case Params.RIBSLEADOUTLEN
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLEADOUTLEN, 0)
                m_bIsLen = True
@@ -798,6 +760,9 @@ Public Class NumericMachiningParam
             Case Params.AUXSOLIDSWIPEDIR
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSWIPEDIR, 0)
                m_bIsLen = True
+            Case Params.FLOWRATE_PC
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_CONSTANT, 100)
+               m_bIsLen = False
          End Select
       End If
       m_dOrigValue = m_dValue
@@ -819,6 +784,8 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_STRANDCOUNT, sWriteValue)
          Case Params.OFFSET
             WriteMachiningParam(nIndex, MAC_OFFSET, sWriteValue)
+         Case Params.STRANDOVERLAP
+            WriteMachiningParam(nIndex, MAC_STRANDOVERLAP, sWriteValue)
          Case Params.STARTPOINTOFFSETONSLICE
             WriteMachiningParam(nIndex, MAC_STARTPOINTOFFSETONSLICE, sWriteValue)
          Case Params.LINKPARAM
@@ -837,12 +804,14 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_LEADOUTORTHODIST, sWriteValue)
          Case Params.COASTINGLEN
             WriteMachiningParam(nIndex, MAC_COASTINGLEN, sWriteValue)
-         Case Params.COASTINGFEED
-            WriteMachiningParam(nIndex, MAC_COASTINGFEED, sWriteValue)
+         Case Params.COASTINGFEED_PC
+            WriteMachiningParam(nIndex, MAC_COASTINGFEEDPU, sWriteValue)
          Case Params.WIPELEN
             WriteMachiningParam(nIndex, MAC_WIPELEN, sWriteValue)
-         Case Params.WIPEFEEDPU
+         Case Params.WIPEFEED_PC
             WriteMachiningParam(nIndex, MAC_WIPEFEEDPU, sWriteValue)
+         Case Params.WIPEDIR
+            WriteMachiningParam(nIndex, MAC_WIPEDIR, sWriteValue)
          Case Params.FLOORCOUNT
             WriteMachiningParam(nIndex, MAC_FLOORCOUNT, sWriteValue)
          Case Params.G0FEED
@@ -853,18 +822,8 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_RIBSOVERLAP, sWriteValue)
          Case Params.RIBSSTRANDCOUNT
             WriteMachiningParam(nIndex, MAC_RIBSSTRANDCOUNT, sWriteValue)
-         Case Params.RIBSLINK
-            WriteMachiningParam(nIndex, MAC_RIBSLINK, sWriteValue)
-         Case Params.RIBSINVERTORDER
-            WriteMachiningParam(nIndex, MAC_RIBSINVERTORDER, sWriteValue)
-         Case Params.RIBSINVERTDIRECTION
-            WriteMachiningParam(nIndex, MAC_RIBSINVERTDIRECTION, sWriteValue)
-         Case Params.RIBSLEADININVERT
-            WriteMachiningParam(nIndex, MAC_RIBSLEADININVERT, sWriteValue)
          Case Params.RIBSLEADINLEN
             WriteMachiningParam(nIndex, MAC_RIBSLEADINLEN, sWriteValue)
-         Case Params.RIBSLEADOUTINVERT
-            WriteMachiningParam(nIndex, MAC_RIBSLEADOUTINVERT, sWriteValue)
          Case Params.RIBSLEADOUTLEN
             WriteMachiningParam(nIndex, MAC_RIBSLEADOUTLEN, sWriteValue)
          Case Params.RIBSLEADOUTCOASTING
@@ -893,6 +852,8 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSWIPELEN, sWriteValue)
          Case Params.AUXSOLIDSWIPEDIR
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSWIPEDIR, sWriteValue)
+         Case Params.FLOWRATE_PC
+            WriteMachiningParam(nIndex, MAC_CONSTANT, sWriteValue)
       End Select
    End Sub
 
@@ -902,6 +863,7 @@ Public Class NumericMachiningParam
 
    Friend Overrides Sub ResetParam()
       m_dValue = m_dOrigValue
+      NotifyPropertyChanged(NameOf(sValue))
    End Sub
 
 End Class
@@ -952,6 +914,7 @@ Public Class StringMachiningParam
 
    Friend Overrides Sub ResetParam()
       m_sValue = m_sOrigValue
+      NotifyPropertyChanged(NameOf(sValue))
    End Sub
 
 End Class
@@ -990,6 +953,10 @@ Public Class ComboMachiningParam
       End Get
    End Property
 
+   Sub New(Type As Params)
+      MyBase.New(Type)
+   End Sub
+
    Sub New(Type As Params, nIndex As Integer)
       MyBase.New(Type)
       If nIndex = 0 Then
@@ -997,6 +964,20 @@ Public Class ComboMachiningParam
          m_SelValue = Nothing
       Else
          Select Case Type
+            Case Params.SLICINGTYPE
+               Dim nHorizontalPrint As Integer = GetPrivateProfileInt(S_MACH_PRINTING3D, K_HORIZONTAL_PRINT, 0, CurrentMachine.sMachIniFile)
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_SLICINGTYPE.VERTICAL, "Vertical"),
+                                                        New IdNameStruct(Machining.MPAR_SLICINGTYPE.DEG45, "45°")})
+               If nHorizontalPrint > 0 Then
+                  m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.HORIZONTAL, "Horizontal"))
+               End If
+               Dim nSelValue As Double = ReadMachiningParamDouble(nIndex, MAC_SLICINGTYPE, -1)
+               If nSelValue = -1 Then
+                  Dim dSlicing45 As Double = 0
+                  dSlicing45 = ReadMachiningParamDouble(nIndex, MAC_SLICING45, 0)
+                  nSelValue = If(dSlicing45 = 0, Machining.MPAR_SLICINGTYPE.VERTICAL, Machining.MPAR_SLICINGTYPE.DEG45)
+               End If
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
             Case Params.STRANDORDER
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_STRANDORDERS.OUTTOIN, "From Outside To Inside"),
                                                      New IdNameStruct(Machining.MPAR_STRANDORDERS.INTOOUT, "From Inside To Outside")})
@@ -1020,6 +1001,11 @@ Public Class ComboMachiningParam
                                                      New IdNameStruct(Machining.MPAR_LEADINOUT.LINEAR, "Linear"),
                                                      New IdNameStruct(Machining.MPAR_LEADINOUT.ARC, "Arc")})
                m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADOUT, 0))
+            Case Params.RIBSTYPE
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_RIBSTYPE.INTERNAL, "Internal"),
+                                                     New IdNameStruct(Machining.MPAR_RIBSTYPE.EXTERNAL, "External"),
+                                                     New IdNameStruct(Machining.MPAR_RIBSTYPE.UNBOUNDED, "Unbounded")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_RIBSTYPE, 1))
             Case Params.AUXSOLIDSINFILL
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL.NONE, "None"),
                                                      New IdNameStruct(Machining.MPAR_INFILL.OFFSET, "Offset"),
@@ -1041,6 +1027,8 @@ Public Class ComboMachiningParam
 
    Friend Overrides Sub WriteParamOnDb(nIndex As Integer)
       Select Case Type
+         Case Params.SLICINGTYPE
+            WriteMachiningParam(nIndex, MAC_SLICINGTYPE, m_SelValue.Id)
          Case Params.STRANDORDER
             WriteMachiningParam(nIndex, MAC_STRANDORDER, m_SelValue.Id)
          Case Params.DIRECTION
@@ -1051,6 +1039,8 @@ Public Class ComboMachiningParam
             WriteMachiningParam(nIndex, MAC_LEADIN, m_SelValue.Id)
          Case Params.LEADOUT
             WriteMachiningParam(nIndex, MAC_LEADOUT, m_SelValue.Id)
+         Case Params.RIBSTYPE
+            WriteMachiningParam(nIndex, MAC_RIBSTYPE, m_SelValue.Id)
          Case Params.AUXSOLIDSINFILL
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSINFILL, m_SelValue.Id)
          Case Params.AUXSOLIDSSTRANDORDER
@@ -1066,6 +1056,7 @@ Public Class ComboMachiningParam
 
    Friend Overrides Sub ResetParam()
       m_SelValue = m_OrigSelValue
+      NotifyPropertyChanged(NameOf(SelValue))
    End Sub
 
 End Class
@@ -1097,14 +1088,28 @@ Public Class CheckMachiningParam
       End Get
    End Property
 
+   Sub New(Type As Params)
+      MyBase.New(Type)
+   End Sub
+
    Sub New(Type As Params, nIndex As Integer)
       MyBase.New(Type)
       If nIndex = 0 Then
          m_bValue = 0
       Else
          Select Case Type
-            Case Params.SLICING45
-               m_bValue = ReadMachiningParamDouble(nIndex, MAC_SLICING45, 0)
+            Case Params.SPIRALVASE
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_SPIRALVASE, 0)
+            Case Params.RIBSLINK
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLINK, 0)
+            Case Params.RIBSINVERTORDER
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_RIBSINVERTORDER, 0)
+            Case Params.RIBSINVERTDIRECTION
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_RIBSINVERTDIRECTION, 0)
+            Case Params.RIBSLEADININVERT
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLEADININVERT, 0)
+            Case Params.RIBSLEADOUTINVERT
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLEADOUTINVERT, 0)
          End Select
       End If
       m_bOrigValue = m_bValue
@@ -1112,8 +1117,18 @@ Public Class CheckMachiningParam
 
    Friend Overrides Sub WriteParamOnDb(nIndex As Integer)
       Select Case Type
-         Case Params.SLICING45
-            WriteMachiningParam(nIndex, MAC_SLICING45, If(m_bValue, 1, 0))
+         Case Params.SPIRALVASE
+            WriteMachiningParam(nIndex, MAC_SPIRALVASE, If(m_bValue, 1, 0))
+         Case Params.RIBSLINK
+            WriteMachiningParam(nIndex, MAC_RIBSLINK, If(m_bValue, 1, 0))
+         Case Params.RIBSINVERTORDER
+            WriteMachiningParam(nIndex, MAC_RIBSINVERTORDER, If(m_bValue, 1, 0))
+         Case Params.RIBSINVERTDIRECTION
+            WriteMachiningParam(nIndex, MAC_RIBSINVERTDIRECTION, If(m_bValue, 1, 0))
+         Case Params.RIBSLEADININVERT
+            WriteMachiningParam(nIndex, MAC_RIBSLEADININVERT, If(m_bValue, 1, 0))
+         Case Params.RIBSLEADOUTINVERT
+            WriteMachiningParam(nIndex, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0))
       End Select
    End Sub
 
@@ -1123,6 +1138,7 @@ Public Class CheckMachiningParam
 
    Friend Overrides Sub ResetParam()
       m_bValue = m_bOrigValue
+      NotifyPropertyChanged(NameOf(bValue))
    End Sub
 
 End Class
@@ -1196,6 +1212,7 @@ Public Class MaterialMachiningParam
 
    Friend Overrides Sub ResetParam()
       m_bValue = m_bOrigValue
+      NotifyPropertyChanged(NameOf(bValue))
    End Sub
 
 End Class

Icarus/MachiningDb/MachiningDbV.xaml

@@ -17,44 +17,44 @@
          <UniformGrid Rows="1">
             <Button Content="New"
                     Command="{Binding New_Command}"
+                    IsEnabled="{Binding IsEnabled}"
                     Style="{StaticResource ToolBar_TextButton}"/>
             <Button Content="Save"
                     Command="{Binding Save_Command}"
+                    IsEnabled="{Binding IsEnabled}"
                     Style="{StaticResource ToolBar_TextButton}"/>
             <Button Content="Delete"
                     Command="{Binding Delete_Command}"
+                    IsEnabled="{Binding IsEnabled}"
                     Style="{StaticResource ToolBar_TextButton}"/>
          </UniformGrid>
-         <ComboBox Grid.Row="1"
-                   Name="MachiningCombo" 
-                   ItemsSource="{Binding MachiningList}"
-                   SelectedItem="{Binding SelMachining}"
-                   DisplayMemberPath="ghName"/>
-         <Grid Grid.Row="2"
-               Visibility="{Binding Name_Visibility}">
+         <Grid Grid.Row="1">
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="2*"/>
                <ColumnDefinition Width="1*"/>
                <ColumnDefinition Width="Auto"/>
             </Grid.ColumnDefinitions>
-            <TextBlock Text="{Binding Name_Msg}"/>
-            <EgtWPFLib5:EgtTextBox Grid.Column="1"
-                     Text="{Binding SelectedItem.sName, ElementName=MachiningCombo, UpdateSourceTrigger=Explicit}"/>
-            <!--<Button Grid.Column="2"
-                                            Content="R"
-                                            Command="{Binding ResetParam_Command}"
-                                            CommandParameter="dCurrStrandH"
-                                            IsEnabled="{Binding bCurrStrandH_IsModified}"
-                                            VerticalContentAlignment="Center"
-                                            HorizontalContentAlignment="Center"
-                                            Margin="5,0,0,0"
-                                            Style="{StaticResource ToolBar_SmallButton}"/>-->
+            <ComboBox Name="MachiningCombo" 
+                      ItemsSource="{Binding MachiningList}"
+                      SelectedItem="{Binding SelMachining}"
+                      DisplayMemberPath="ghName"
+                      Visibility="{Binding Combo_Visibility}"
+                      Style="{StaticResource FeatureComboBox}"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding SelectedItem.sName, ElementName=MachiningCombo, UpdateSourceTrigger=Explicit}"
+                                   IsExplicitFocused="{Binding UserShouldEditValueNow}"
+                                   Visibility="{Binding Name_Visibility}"
+                                   Style="{StaticResource OptionTextBox}"/>
+            <Button Grid.Column="1"
+                    Command="{Binding EditName_Command}"
+                    Style="{StaticResource ToolBar_Button}">
+               <Image Source="/Resources/TopPanel/Edit.png"/>
+            </Button>
          </Grid>
          <ScrollViewer Grid.Row="3"
                        VerticalScrollBarVisibility="Auto"
                        HorizontalScrollBarVisibility="Disabled">
             <ItemsControl Grid.Row="1"
-                          ItemsSource="{Binding SelectedItem.CathegoryList, ElementName=MachiningCombo}">
+                          ItemsSource="{Binding SelectedItem.CathegoryList, ElementName=MachiningCombo}"
+                          IsEnabled="{Binding IsEnabled}">
                <ItemsControl.ItemsPanel>
                   <ItemsPanelTemplate>
                      <StackPanel Orientation="Vertical"/>
@@ -173,6 +173,7 @@
          <UniformGrid Grid.Row="4" Rows="1">
             <Button Content="Ok"
                     Command="{Binding Ok_Command}"
+                    IsEnabled="{Binding IsEnabled}"
                     Style="{StaticResource ToolBar_TextButton}"/>
          </UniformGrid>
       </Grid>

Icarus/MachiningDb/MachiningDbVM.vb

@@ -59,10 +59,13 @@ Public Class MachiningDbVM
          Return m_Name_Visibility
       End Get
    End Property
-   Friend Sub SetNameVisibility(bValue As Boolean)
-      m_Name_Visibility = If(bValue, Visibility.Visible, Visibility.Collapsed)
-      NotifyPropertyChanged(NameOf(Name_Visibility))
-   End Sub
+
+   Private m_Combo_Visibility As Visibility = Visibility.Visible
+   Public ReadOnly Property Combo_Visibility As Visibility
+      Get
+         Return m_Combo_Visibility
+      End Get
+   End Property
 
    ' variabile che indica se una qualunque lavorazione e' stata modificata
    Private m_bIsModified As Boolean = False
@@ -75,11 +78,39 @@ Public Class MachiningDbVM
       m_bIsModified = value
    End Sub
 
+   Private m_IsEnabled As Boolean = True
+   Public ReadOnly Property IsEnabled As Boolean
+      Get
+         Return m_IsEnabled
+      End Get
+   End Property
+   Friend Sub SetIsEnabled(value As Boolean)
+      m_IsEnabled = value
+      NotifyPropertyChanged(NameOf(IsEnabled))
+   End Sub
+
+   Private m_UserShouldEditValueNow As Boolean = False
+   Public Property UserShouldEditValueNow As Boolean
+      Get
+         Return m_UserShouldEditValueNow
+      End Get
+      Set(value As Boolean)
+         m_UserShouldEditValueNow = value
+      End Set
+   End Property
+   Friend Sub SetUserShouldEditValueNow()
+      m_UserShouldEditValueNow = True
+      NotifyPropertyChanged(NameOf(UserShouldEditValueNow))
+      m_UserShouldEditValueNow = False
+      NotifyPropertyChanged(NameOf(UserShouldEditValueNow))
+   End Sub
+
    ' Definizione comandi
    Private m_cmdOk As ICommand
    Private m_cmdNew As ICommand
    Private m_cmdSave As ICommand
    Private m_cmdDelete As ICommand
+   Private m_cmdEditName As ICommand
 
 #End Region    ' FIELDS & PROPERTIES
 
@@ -109,6 +140,14 @@ Public Class MachiningDbVM
       NotifyPropertyChanged(NameOf(SelMachining))
    End Sub
 
+   Friend Sub SetNameVisibility(bValue As Boolean)
+      m_Name_Visibility = If(bValue, Visibility.Visible, Visibility.Collapsed)
+      m_Combo_Visibility = If(Not bValue, Visibility.Visible, Visibility.Collapsed)
+      NotifyPropertyChanged(NameOf(Name_Visibility))
+      NotifyPropertyChanged(NameOf(Combo_Visibility))
+      If bValue Then SetUserShouldEditValueNow()
+   End Sub
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -125,7 +164,7 @@ Public Class MachiningDbVM
    End Property
 
    Public Sub Ok()
-      If m_SelMachining.bIsModified Then
+      If Not IsNothing(m_SelMachining) AndAlso m_SelMachining.bIsModified Then
          ' chiedo se salvare
          Select Case MessageBox.Show("Do you want to save modified parameters?", "Warning", MessageBoxButton.YesNoCancel, MessageBoxImage.Warning)
             Case MessageBoxResult.Yes
@@ -170,6 +209,11 @@ Public Class MachiningDbVM
          For Index = 0 To m_MachiningList.Count - 1
             m_MachiningList(Index).WriteParamsOnDb(Index + 1)
          Next
+         m_bIsModified = False
+         ' aggiorno combo top
+         Dim CurrSelTopMachining As MachiningIndex = Map.refTopPanelVM.SelMachining
+         Map.refTopPanelVM.InitMachiningsList()
+         Map.refTopPanelVM.SetSelMachining( CurrSelTopMachining)
       End If
       ' ripristino modalita' standard
       Map.refTopPanelVM.SelPage = Pages.MODIFY
@@ -211,6 +255,7 @@ Public Class MachiningDbVM
    End Property
 
    Public Sub Save()
+      If IsNothing( m_SelMachining) Then Return
       m_SelMachining.Save()
    End Sub
 
@@ -228,10 +273,12 @@ Public Class MachiningDbVM
    End Property
 
    Public Sub Delete()
+      If IsNothing(m_SelMachining) Then Return
       ' chiedo conferma
       Select Case MessageBox.Show("Sei sicuro di voler cancellare la lavorazione selezionata?", "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning)
          Case MessageBoxResult.Yes
             m_MachiningList.Remove(m_SelMachining)
+            SetIsModified(True)
          Case MessageBoxResult.No
             Return
       End Select
@@ -239,6 +286,25 @@ Public Class MachiningDbVM
 
 #End Region    ' Delete
 
+#Region "EditName"
+
+   Public ReadOnly Property EditName_Command As ICommand
+      Get
+         If m_cmdEditName Is Nothing Then
+            m_cmdEditName = New Command(AddressOf EditName)
+         End If
+         Return m_cmdEditName
+      End Get
+   End Property
+
+   Public Sub EditName()
+      If IsNothing(m_SelMachining) Then Return
+      SetNameVisibility(True)
+      SetIsEnabled(False)
+   End Sub
+
+#End Region    ' EditName
+
 #End Region    ' COMMANDS
 
 End Class

Icarus/MainWindow/MainWindowM.vb

@@ -195,8 +195,8 @@ Public Class MainWindowM
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2405, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(3279, 2405, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(3279, 2410, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(3279, 2410, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & GENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())
@@ -214,6 +214,8 @@ Public Class MainWindowM
       If GetMainPrivateProfileString(S_GENERAL, K_MESSAGESDIR, "", sMsgDir) = 0 Then
          sMsgDir = m_sConfigDir
       End If
+      ' Inizializzo OptionModule
+      OptionModule.InitOptionModule()
       ' Leggo lingua corrente
       Dim sLanguage As String = String.Empty
       GetMainPrivateProfileString(S_GENERAL, K_MESSAGES, "", sLanguage)

Icarus/MainWindow/MainWindowV.xaml.vb

@@ -19,6 +19,7 @@ Class MainWindowV
       AddHandler Me.ContentRendered, AddressOf MainWindowV_ContentRendered
       AddHandler Me.Closing, AddressOf MainWindowV_Closing
       AddHandler Me.KeyDown, AddressOf MainWindowV_KeyDown
+      AddHandler Me.StateChanged, AddressOf MainWindowV_StateChanged
    End Sub
 
 #End Region    ' CONSTRUCTOR
@@ -63,6 +64,14 @@ Class MainWindowV
       End If
    End Sub
 
+   Private Sub MainWindowV_StateChanged(sender As Object, e As EventArgs)
+      If Not IsNothing(Map.refSecondaryWindowV) AndAlso Not Map.refSecondaryWindowV.WindowChangingState Then
+         Map.refSecondaryWindowV.WindowState = Me.WindowState
+         'Application.Current.MainWindow.Topmost = True
+         'Application.Current.MainWindow.Topmost = False
+      End If
+   End Sub
+
 #End Region    ' EVENTS
 
 End Class

Icarus/MainWindow/MainWindowVM.vb

@@ -285,7 +285,11 @@ Public Class MainWindowVM
       ' Se non confermata chiusura, esco
       If Not bAllowClose Then Return
       ' salvo modo di visualizzazione
-      WriteMainPrivateProfileString(S_SCENE, K_SHOWMODE, EgtGetShowMode().ToString)
+      WriteMainPrivateProfileString(S_SCENE, K_SHOWMODE, EgtGetShowMode().ToString())
+      ' Salvo stato visualizzazione direzione curve
+      WriteMainPrivateProfileString(S_SCENE, K_CURVEDIR, If(EgtGetShowCurveDirection(), "1", "0"))
+      ' Salvo stato visualizzazione griglia
+      WriteMainPrivateProfileString(S_GRID, K_SHOWGRID, If(Map.refMyStatusBarVM.bGridVisibility, "1", "0"))
       ' Termino il Model
       m_MainWindowM.Close()
       ' Termino il programma

Icarus/ManagePartPanel/ManagePartPanelV.xaml

@@ -0,0 +1,147 @@
+<UserControl x:Class="ManagePartPanelV"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:local="clr-namespace:Icarus"
+             xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+             Width="150"
+             Margin="5,0,0,0"
+             VerticalAlignment="Stretch">
+   <Grid DockPanel.Dock="Left">
+      <Grid.RowDefinitions>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="2*"/>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="Auto"/>
+      </Grid.RowDefinitions>
+      <Border Style="{StaticResource LeftPanelTitle_Border}">
+         <TextBlock Text="Part Entity List"
+                    FontWeight="DemiBold"
+                    FontSize="14"/>
+      </Border>
+      <!--<UniformGrid Grid.Row="1" Rows="1"
+                   IsEnabled="{Binding IsEnabled}">
+         <Button DockPanel.Dock="Left"
+                 Content="+"
+                 FontSize="20"
+                 Command="{Binding AddPart_Command}"
+                 Style="{StaticResource LeftPanel_Button}"/>
+         <Button DockPanel.Dock="Left"
+                 Content="-"
+                 FontSize="20"
+                 Command="{Binding RemovePart_Command}"
+                 Style="{StaticResource LeftPanel_Button}"/>
+      </UniformGrid>-->
+      <TreeView Grid.Row="2" 
+                ItemsSource="{Binding ManagerPartList}"
+                MinHeight="200"
+                IsEnabled="{Binding IsEnabled}">
+         <TreeView.Resources>
+            <HierarchicalDataTemplate DataType="{x:Type local:ManagePart_Part}" 
+                                      ItemsSource="{Binding LayerList}">
+               <StackPanel Orientation="Horizontal">
+                  <Image Source="/Resources/TreeView/Folder.png" 
+                         Height="15"/>
+                  <Grid>
+                     <TextBlock Text="{Binding sName}"
+                                Visibility="{Binding TextBlock_Visibility}"/>
+                     <EgtWPFLib5:EgtTextBox Text="{Binding sName, UpdateSourceTrigger=Explicit}"
+                                            IsExplicitFocused="{Binding UserShouldEditValueNow}"
+                                            Visibility="{Binding TextBox_Visibility}"
+                                            Style="{StaticResource OptionTextBox}"/>
+                  </Grid>
+               </StackPanel>
+            </HierarchicalDataTemplate>
+            <HierarchicalDataTemplate DataType="{x:Type local:ManagePart_Layer}" 
+                                      ItemsSource="{Binding EntityList, UpdateSourceTrigger=PropertyChanged}">
+               <StackPanel Orientation="Horizontal">
+                  <Image Source="/Resources/TreeView/Folder.png"
+                         Height="15"/>
+                  <TextBlock Text="{Binding sName}" />
+               </StackPanel>
+            </HierarchicalDataTemplate>
+            <HierarchicalDataTemplate DataType="{x:Type local:PartManager_GeomEntity}">
+               <Grid>
+                  <TextBlock Text="{Binding sName}" />
+                  <EgtWPFLib5:EgtTextBox Text="{Binding sName, UpdateSourceTrigger=Explicit}"
+                                         IsExplicitFocused="{Binding UserShouldEditValueNow}"
+                                         Visibility="{Binding TextBox_Visibility}"
+                                         Style="{StaticResource OptionTextBox}"/>
+               </Grid>
+            </HierarchicalDataTemplate>
+            <!-- Menu' tasto destro -->
+            <ContextMenu x:Key="RowMenu" ItemsSource="{Binding MenuList}" >
+               <ContextMenu.ItemContainerStyle>
+                  <Style TargetType="MenuItem">
+                     <Setter Property="Command" Value="{Binding MenuItem_Command}"/>
+                     <Setter Property="Header" Value="{Binding sMsg}"/>
+                  </Style>
+               </ContextMenu.ItemContainerStyle>
+            </ContextMenu>
+         </TreeView.Resources>
+         <TreeView.ItemContainerStyle>
+            <Style TargetType="{x:Type TreeViewItem}">
+               <Setter Property="IsSelected" Value="{Binding bIsSelected, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}"/>
+               <Setter Property="IsExpanded" Value="True"/>
+               <Setter Property="ContextMenu" Value="{StaticResource RowMenu}"/>
+               <EventSetter Event="ContextMenuOpening" Handler="Item_ContextMenuOpening"/>
+            </Style>
+         </TreeView.ItemContainerStyle>
+      </TreeView>
+      <Border Grid.Row="3"
+              Visibility="{Binding IsImport_Visibility}"
+              Style="{StaticResource LeftPanelTitle_Border}">
+         <TextBlock Text="Imported Entity List"
+                    FontWeight="DemiBold"
+                    FontSize="14"/>
+      </Border>
+      <ListBox Grid.Row="4" 
+               ItemsSource="{Binding ImportedEntityList, UpdateSourceTrigger=PropertyChanged}"
+               SelectedItem="{Binding SelImportedEntity}"
+               MinHeight="100"
+               IsEnabled="{Binding IsEnabled}"
+               Visibility="{Binding IsImport_Visibility}">
+         <ListBox.Resources>
+            <!-- Menu' tasto destro -->
+            <ContextMenu x:Key="RowMenu" ItemsSource="{Binding MenuList}" >
+               <ContextMenu.ItemContainerStyle>
+                  <Style TargetType="MenuItem">
+                     <Setter Property="Command" Value="{Binding MenuItem_Command}"/>
+                     <Setter Property="Header" Value="{Binding sMsg}"/>
+                  </Style>
+               </ContextMenu.ItemContainerStyle>
+            </ContextMenu>
+         </ListBox.Resources>
+         <ListBox.ItemContainerStyle>
+            <Style TargetType="ListBoxItem">
+               <Setter Property="HorizontalContentAlignment" Value="Stretch"/>
+               <Setter Property="ContextMenu" Value="{StaticResource RowMenu}" />
+            </Style>
+         </ListBox.ItemContainerStyle>
+         <ListBox.ItemTemplate>
+            <DataTemplate>
+               <Grid HorizontalAlignment="Stretch">
+                  <Grid.InputBindings>
+                     <MouseBinding Gesture="LeftDoubleClick"
+                                   Command="{Binding GeomEntityDoubleClick_Command}"/>
+                  </Grid.InputBindings>
+                  <TextBlock Text="{Binding ghName}">
+                  </TextBlock>
+               </Grid>
+            </DataTemplate>
+         </ListBox.ItemTemplate>
+      </ListBox>
+      <UniformGrid Grid.Row="5"
+                   Rows="1"
+                   IsEnabled="{Binding IsEnabled}">
+         <Button Content="Ok"
+                 Command="{Binding Ok_Command}"
+                 Style="{StaticResource ToolBar_TextButton}"/>
+         <Button Content="Cancel"
+                 Command="{Binding Cancel_Command}"
+                 Visibility="{Binding IsImport_Visibility}"
+                 Style="{StaticResource ToolBar_TextButton}"/>
+      </UniformGrid>
+   </Grid>
+</UserControl>

Icarus/ManagePartPanel/ManagePartPanelV.xaml.vb

@@ -0,0 +1,24 @@
+Public Class ManagePartPanelV
+
+   Protected Sub Item_ContextMenuOpening(sender As Object, e As ContextMenuEventArgs)
+      Dim PartItem As ManagePart_Part
+      Dim LayerItem As ManagePart_Layer
+      Dim EntityItem As PartManager_GeomEntity
+      Select Case e.OriginalSource.DataContext.GetType()
+         Case GetType(ManagePart_Part)
+            PartItem = DirectCast(e.OriginalSource.DataContext, ManagePart_Part)
+            If PartItem.MenuList.Count = 0 Then
+               e.Handled = True
+            End If
+         Case GetType(ManagePart_Layer)
+            LayerItem = DirectCast(e.OriginalSource.DataContext, ManagePart_Layer)
+            e.Handled = True
+         Case GetType(PartManager_GeomEntity)
+            EntityItem = DirectCast(e.OriginalSource.DataContext, PartManager_GeomEntity)
+            If EntityItem.MenuList.Count = 0 Then
+               e.Handled = True
+            End If
+      End Select
+   End Sub
+
+End Class

Icarus/ManagePartPanel/ManagePartPanelVM.vb

@@ -0,0 +1,506 @@
+Imports System.Collections.ObjectModel
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class ManagePartPanelVM
+   Inherits VMBase
+
+   Public Enum ManagePartType
+      IMPORT = 1
+      MODIFY = 2
+   End Enum
+
+   Private m_Type As ManagePartType
+   Friend ReadOnly Property Type As ManagePartType
+      Get
+         Return m_Type
+      End Get
+   End Property
+
+   Private m_nImportedPartId As Integer = GDB_ID.NULL
+   Friend ReadOnly Property nImportedPartId As Integer
+      Get
+         Return m_nImportedPartId
+      End Get
+   End Property
+
+   Private m_ImportedEntityList As New ObservableCollection(Of PartManager_GeomEntity)
+   Public Property ImportedEntityList As ObservableCollection(Of PartManager_GeomEntity)
+      Get
+         Return m_ImportedEntityList
+      End Get
+      Set(value As ObservableCollection(Of PartManager_GeomEntity))
+         m_ImportedEntityList = value
+      End Set
+   End Property
+
+   Private m_SelImportedEntity As PartManager_GeomEntity
+   Public Property SelImportedEntity As PartManager_GeomEntity
+      Get
+         Return m_SelImportedEntity
+      End Get
+      Set(value As PartManager_GeomEntity)
+         m_SelImportedEntity = value
+         EgtDeselectAll()
+         If Not IsNothing(m_SelImportedEntity) Then
+            EgtSelectObj(m_SelImportedEntity.nId)
+         End If
+         EgtDraw()
+      End Set
+   End Property
+   Friend Sub SetSelImportedEntity(nId As Integer)
+      Dim SelEntity As PartManager_GeomEntity = Nothing
+      ' cerco tra entita' importate
+      SelEntity = m_ImportedEntityList.FirstOrDefault(Function(x) x.nId = nId)
+      If IsNothing(SelEntity) Then
+         ' cerco tra pezzi creati
+         For Each ManagePart In m_ManagerPartList
+            For Each Layer In ManagePart.LayerList
+               SelEntity = Layer.EntityList.FirstOrDefault(Function(x) x.nId = nId)
+               If Not IsNothing(SelEntity) Then
+                  SelEntity.bIsSelected = True
+                  SelEntity.NotifyPropertyChanged(NameOf(SelEntity.bIsSelected))
+                  Exit For
+               End If
+            Next
+            If Not IsNothing(SelEntity) Then
+               Exit For
+            End If
+         Next
+      End If
+      m_SelImportedEntity = SelEntity
+      EgtDeselectAll()
+      If Not IsNothing(m_SelImportedEntity) Then
+         EgtSelectObj(m_SelImportedEntity.nId)
+      End If
+      EgtDraw()
+      NotifyPropertyChanged(NameOf(SelImportedEntity))
+   End Sub
+
+   Private m_ManagerPartList As New ObservableCollection(Of ManagePart_Part)
+   Public ReadOnly Property ManagerPartList As ObservableCollection(Of ManagePart_Part)
+      Get
+         Return m_ManagerPartList
+      End Get
+   End Property
+
+   Private m_SelManagerPart As ManagePart_Part
+   Friend Sub SetSelManagerPart(SelManagePart_Part As ManagePart_Part)
+      m_SelManagerPart = SelManagePart_Part
+      m_SelManagerLayer = Nothing
+   End Sub
+   Public ReadOnly Property SelManagerPart As ManagePart_Part
+      Get
+         Return m_SelManagerPart
+      End Get
+   End Property
+
+   Private m_SelManagerLayer As ManagePart_Layer
+   Public ReadOnly Property SelManagerLayer As ManagePart_Layer
+      Get
+         Return m_SelManagerLayer
+      End Get
+   End Property
+   Friend Sub SetSelManagerLayer(SelManagePart_Layer As ManagePart_Layer)
+      m_SelManagerPart = m_ManagerPartList.FirstOrDefault(Function(x) x.LayerList.Contains(SelManagePart_Layer))
+      m_SelManagerLayer = SelManagePart_Layer
+   End Sub
+
+   Private m_SelPartManager_GeomEntity As PartManager_GeomEntity
+   Public ReadOnly Property SelPartManager_GeomEntity As PartManager_GeomEntity
+      Get
+         Return m_SelPartManager_GeomEntity
+      End Get
+   End Property
+   Friend Sub SetSelPartManager_GeomEntity(SelPartManager_GeomEntity As PartManager_GeomEntity)
+      For Each CurrPart In m_ManagerPartList
+         Dim CurrLayer As ManagePart_Layer = CurrPart.LayerList.FirstOrDefault(Function(x) x.EntityList.Contains(SelPartManager_GeomEntity))
+         If Not IsNothing(CurrLayer) Then
+            m_SelManagerPart = CurrPart
+            m_SelManagerLayer = CurrLayer
+            Exit For
+         End If
+      Next
+      m_SelPartManager_GeomEntity = SelPartManager_GeomEntity
+   End Sub
+
+   Public ReadOnly Property IsImport_Visibility As Visibility
+      Get
+         Select Case m_Type
+            Case ManagePartType.IMPORT
+               Return Visibility.Visible
+            Case Else ' ManagePartType.MODIFY
+               Return Visibility.Collapsed
+         End Select
+      End Get
+   End Property
+
+   Private m_IsEnabled As Boolean = True
+   Public ReadOnly Property IsEnabled As Boolean
+      Get
+         Return m_IsEnabled
+      End Get
+   End Property
+   Friend Sub SetIsEnabled(value As Boolean)
+      m_IsEnabled = value
+      NotifyPropertyChanged(NameOf(IsEnabled))
+   End Sub
+
+   ' Definizione comandi
+   Private m_cmdSetReference As ICommand
+   Private m_cmdAddPart As ICommand
+   Private m_cmdRemovePart As ICommand
+   Private m_cmdOk As ICommand
+   Private m_cmdCancel As ICommand
+
+   Sub New()
+      ' Creo riferimento a questa classe in EgtCAM5Map
+      Map.SetRefManagePartPanelVM(Me)
+   End Sub
+
+#Region "METHODS"
+
+   Friend Sub Init(Type As ManagePartType)
+      m_Type = Type
+      Select Case Type
+         Case ManagePartType.IMPORT
+            ' import
+            m_ImportedEntityList.Clear()
+            m_ManagerPartList.Clear()
+            ' aggiungo geometrie importate a lista
+            m_nImportedPartId = EgtGetLastPart()
+            Dim nLayerId As Integer = EgtGetFirstLayer(m_nImportedPartId)
+            Dim nGeometryId As Integer = EgtGetFirstInGroup(nLayerId)
+            While nGeometryId <> GDB_ID.NULL
+               Dim sGeometryName As String = ""
+               EgtGetName(nGeometryId, sGeometryName)
+               m_ImportedEntityList.Add(New PartManager_GeomEntity(Nothing, nGeometryId))
+               nGeometryId = EgtGetNext(nGeometryId)
+            End While
+            ' aggiungo primo pezzo
+            m_ManagerPartList.Add(New ManagePart_Part(Nothing))
+            m_ManagerPartList(0).LayerList.FirstOrDefault(Function(x) x.Type = ManagePart_Layer.LayerType.PRINT_SOLID).bIsSelected = True
+            ' aggiorno i contextmenu di tutti gli entity
+            UpdateAllEntityContextMenu()
+         Case ManagePartType.MODIFY
+            ' modify
+            m_ImportedEntityList.Clear()
+            m_ManagerPartList.Clear()
+            ' carico pezzi in lista
+            For Each PrintPart In Map.refTopPanelVM.PartList
+               m_ManagerPartList.Add(New ManagePart_Part(PrintPart))
+            Next
+      End Select
+      NotifyPropertyChanged(NameOf(IsImport_Visibility))
+      EgtDeselectAll()
+   End Sub
+
+   Friend Sub UpdateAllEntityContextMenu()
+      ' aggiorno i contextmenu di tutti gli entity
+      For Each ManagePart In m_ManagerPartList
+         For Each Layer In ManagePart.LayerList
+            For Each Entity In Layer.EntityList
+               Entity.UpdateContextMenu()
+            Next
+         Next
+      Next
+      For Each Entity In ImportedEntityList
+         Entity.UpdateContextMenu()
+      Next
+   End Sub
+
+#End Region    ' METHODS
+
+#Region "COMMANDS"
+
+#Region "AddPart"
+
+   Public ReadOnly Property AddPart_Command As ICommand
+      Get
+         If m_cmdAddPart Is Nothing Then
+            m_cmdAddPart = New Command(AddressOf AddPart)
+         End If
+         Return m_cmdAddPart
+      End Get
+   End Property
+
+   Public Sub AddPart()
+      m_ManagerPartList.Add(New ManagePart_Part(Nothing))
+      ' aggiorno i contextmenu di tutti gli entity
+      UpdateAllEntityContextMenu()
+   End Sub
+
+#End Region    ' AddPart
+
+#Region "RemovePart"
+
+   Public ReadOnly Property RemovePart_Command As ICommand
+      Get
+         If m_cmdRemovePart Is Nothing Then
+            m_cmdRemovePart = New Command(AddressOf RemovePart)
+         End If
+         Return m_cmdRemovePart
+      End Get
+   End Property
+
+   Public Sub RemovePart()
+      If IsNothing(SelManagerLayer) AndAlso m_ManagerPartList.Count > 1 Then
+         ' rimuovo pezzo
+         m_ManagerPartList.Remove(SelManagerPart)
+         'Else
+         '   ' rimuovo geometria
+         '   Dim CurrEntity As PartManager_GeomEntity = m_SelPartManager_GeomEntity
+         '   SelManagerLayer.EntityList.Remove(m_SelPartManager_GeomEntity)
+         '   ' la rimetto in lista importati
+         '   ImportedEntityList.Add(CurrEntity)
+      End If
+   End Sub
+
+#End Region    ' RemovePart
+
+#Region "Ok"
+
+   Public ReadOnly Property Ok_Command As ICommand
+      Get
+         If m_cmdOk Is Nothing Then
+            m_cmdOk = New Command(AddressOf Ok)
+         End If
+         Return m_cmdOk
+      End Get
+   End Property
+
+   Public Sub Ok()
+      Select Case m_Type
+         Case ManagePartType.IMPORT
+            Dim sErr As New List(Of String)
+            ' verifico che tutti i pezzi abbiano una superficie da stampare nel layer apposito
+            For Each CurrPart In m_ManagerPartList
+               For Each CurrLayer In CurrPart.LayerList
+                  Select Case CurrLayer.Type
+                     Case ManagePart_Layer.LayerType.PRINT_SOLID
+                        If CurrLayer.EntityList.Count = 0 Then
+                           If sErr.Count > 0 Then sErr(sErr.Count - 1) &= Environment.NewLine
+                           sErr.Add(CurrPart.sName & " - No print surface defined!")
+                        End If
+                  End Select
+               Next
+            Next
+            If sErr.Count > 0 Then
+               MessageBox.Show(String.Concat(sErr), "Error")
+               Return
+            Else
+               ' Creo pezzi e layer necessari
+               For ManagePart_PartIndex = 0 To m_ManagerPartList.Count - 1
+                  Dim ManagePart_Part As ManagePart_Part = m_ManagerPartList(ManagePart_PartIndex)
+                  Dim frImportedPart As New Frame3d
+                  EgtGetGroupGlobFrame(m_nImportedPartId, frImportedPart)
+                  Dim nPartId As Integer = EgtCreateGroup(GDB_ID.ROOT, frImportedPart)
+                  EgtSetName(nPartId, PART)
+                  Dim nFrameId As Integer = GDB_ID.NULL
+                  Dim b3PrintSolid As New BBox3d
+                  Dim nPrintPartLayerId As Integer = GDB_ID.NULL
+                  Dim PrintSolidEntity As PartManager_GeomEntity = Nothing
+                  Dim nRibsLayerId As Integer = GDB_ID.NULL
+                  Dim nShellNumberLayerId As Integer = GDB_ID.NULL
+                  Dim nAuxSolidsLayerId As Integer = GDB_ID.NULL
+                  Dim nMachStartLayerId As Integer = GDB_ID.NULL
+                  Dim nOthersLayerId As Integer = GDB_ID.NULL
+                  For Each ManagePart_Layer In ManagePart_Part.LayerList
+                     Select Case ManagePart_Layer.Type
+                        Case ManagePart_Layer.LayerType.PRINT_SOLID
+                           nPrintPartLayerId = EgtCreateGroup(nPartId)
+                           EgtSetName(nPrintPartLayerId, PRINT_SOLID)
+                           If ManagePart_Layer.EntityList.Count > 0 Then
+                              PrintSolidEntity = ManagePart_Layer.EntityList(0)
+                              EgtRelocateGlob(PrintSolidEntity.nId, nPrintPartLayerId, GDB_POS.LAST_SON)
+                              ' calcolo box superficie per creazione riferimento
+                              EgtGetBBoxGlob(PrintSolidEntity.nId, GDB_BB.STANDARD, b3PrintSolid)
+                              ' coloro l'entita'
+                              EgtSetColor(PrintSolidEntity.nId, GeomEntityColors.c3Print)
+                              If PrintSolidEntity.sName <> PrintSolidEntity.nId.ToString() Then
+                                 EgtSetInfo(PrintSolidEntity.nId, ENTITY_NAME, PrintSolidEntity.sName)
+                              End If
+                           End If
+                        Case ManagePart_Layer.LayerType.MACH_START
+                           nMachStartLayerId = EgtCreateGroup(nPartId)
+                           EgtSetName(nMachStartLayerId, LAY_MACH_START)
+                           Dim nMachStartId As Integer = GDB_ID.NULL
+                           If ManagePart_Layer.EntityList.Count > 0 Then
+                              For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
+                                 ' se punto o curva compo
+                                 Dim EntityType As GDB_TY = EgtGetType(PartManager_GeomEntity.nId)
+                                 Select Case EntityType
+                                    Case GDB_TY.GEO_POINT, GDB_TY.CRV_COMPO
+                                       ' gli cambio layer
+                                       EgtRelocateGlob(PartManager_GeomEntity.nId, nMachStartLayerId, GDB_POS.LAST_SON)
+                                       nMachStartId = PartManager_GeomEntity.nId
+                                    Case GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
+                                       ' altrimenti la trasformo in curva compo
+                                       nMachStartId = EgtCreateCurveCompo(nMachStartLayerId, PartManager_GeomEntity.nId, True)
+                                 End Select
+                                 EgtSetName(nMachStartId, START_GEOM)
+                                 ' coloro l'entita'
+                                 EgtSetColor(nMachStartId, GeomEntityColors.c3MachStart)
+                                 If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                    EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                                 End If
+                              Next
+                           Else
+                              ' creo punto di partenza
+                              Dim ptStart As Point3d = b3PrintSolid.Center() - 0.6 * b3PrintSolid.DimY() * Vector3d.Y_AX() - 0.5 * b3PrintSolid.DimZ() * Vector3d.Z_AX()
+                              nMachStartId = EgtCreateGeoPoint(nMachStartLayerId, ptStart, GDB_RT.GLOB)
+                              EgtSetName(nMachStartId, START_GEOM)
+                              ' coloro l'entita' di rosso
+                              EgtSetColor(nMachStartId, GeomEntityColors.c3MachStart)
+                           End If
+                        Case ManagePart_Layer.LayerType.RIBS
+                           nRibsLayerId = EgtCreateGroup(nPartId)
+                           EgtSetName(nRibsLayerId, LAY_RIBS)
+                           For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
+                              EgtSetInfo(PartManager_GeomEntity.nId, KEY_RIB_TYPE, RibEntity.RibTypes.FROMIMPORT)
+                              EgtRelocateGlob(PartManager_GeomEntity.nId, nRibsLayerId, GDB_POS.LAST_SON)
+                              ' coloro l'entita'
+                              EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3Rib)
+                              If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                 EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                              End If
+                           Next
+                        Case ManagePart_Layer.LayerType.SHELL_NUMBER
+                           nShellNumberLayerId = EgtCreateGroup(nPartId)
+                           EgtSetName(nShellNumberLayerId, LAY_SHELL_NBR)
+                           For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
+                              EgtSetInfo(PartManager_GeomEntity.nId, KEY_SHELLNBR_TYPE, ShellNumberEntity.ShellNumberTypes.FROMIMPORT)
+                              EgtRelocateGlob(PartManager_GeomEntity.nId, nShellNumberLayerId, GDB_POS.LAST_SON)
+                              ' coloro l'entita'
+                              EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3ShellNumber)
+                              If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                 EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                              End If
+                           Next
+                        Case ManagePart_Layer.LayerType.AUX_SOLIDS
+                           nAuxSolidsLayerId = EgtCreateGroup(nPartId)
+                           EgtSetName(nAuxSolidsLayerId, LAY_AUX_SOLIDS)
+                           For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
+                              EgtSetInfo(PartManager_GeomEntity.nId, KEY_AUXSOLID_TYPE, RibEntity.RibTypes.FROMIMPORT)
+                              EgtRelocateGlob(PartManager_GeomEntity.nId, nAuxSolidsLayerId, GDB_POS.LAST_SON)
+                              ' coloro l'entita'
+                              EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3AuxSolids)
+                              If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                 EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                              End If
+                           Next
+                        Case ManagePart_Layer.LayerType.OTHERS
+                           nOthersLayerId = EgtCreateGroup(nPartId)
+                           EgtSetName(nOthersLayerId, LAY_OTHERS)
+                           For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
+                              EgtRelocateGlob(PartManager_GeomEntity.nId, nOthersLayerId, GDB_POS.LAST_SON)
+                              ' coloro l'entita'
+                              EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3Others)
+                              If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                 EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                              End If
+                           Next
+                           If ManagePart_PartIndex = 0 Then
+                              For Each PartManager_GeomEntity In ImportedEntityList
+                                 ' se curva
+                                 Dim EntityType As GDB_TY = EgtGetType(PartManager_GeomEntity.nId)
+                                 Select Case EntityType
+                                    Case GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
+                                       '  la trasformo in curva compo
+                                       Dim nOtherId As Integer = EgtCreateCurveCompo(nOthersLayerId, PartManager_GeomEntity.nId, True)
+                                       ' coloro l'entita'
+                                       EgtSetColor(nOtherId, GeomEntityColors.c3Others)
+                                       If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                          EgtSetInfo(nOtherId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                                       End If
+                                    Case Else
+                                       ' altrimenti la sposto solamente
+                                       EgtRelocateGlob(PartManager_GeomEntity.nId, nOthersLayerId, GDB_POS.LAST_SON)
+                                       ' coloro l'entita'
+                                       EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3Others)
+                                       If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                          EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                                       End If
+                                 End Select
+                              Next
+                           End If
+                     End Select
+                  Next
+                  ' aggiungo riferimento
+                  Dim nReferenceLayerId As Integer = EgtCreateGroup(nPartId)
+                  EgtSetName(nReferenceLayerId, LAY_REFERENCE)
+                  ' Creo riferimento 
+                  Dim ptOrig As New Point3d(b3PrintSolid.Min())
+                  Dim frPrintSolid As New Frame3d(ptOrig)
+                  nFrameId = EgtCreateGeoFrame(nReferenceLayerId, frPrintSolid, GDB_RT.GLOB)
+                  If nFrameId Then
+                     EgtSetName(nFrameId, FRAME_PART)
+                     EgtSetMode(nFrameId, GDB_MD.LOCKED)
+                  End If
+                  EgtSetInfo(nReferenceLayerId, KEY_REFERENCE, ReferenceBtn.References.BL)
+                  ' appoggio il pezzo sulla tavola
+                  EgtMove(nPartId, New Vector3d(0, 0, -b3PrintSolid.Min.z))
+                  ' lo aggiungo a lista pezzi 
+                  Dim sFilePath As String = ""
+                  EgtGetInfo(m_nImportedPartId, FILE_PATH, sFilePath)
+                  EgtSetInfo(nPartId, FILE_PATH, sFilePath)
+                  EgtSetInfo(nPartId, PART_NAME, ManagePart_Part.sName)
+                  EgtSetInfo(nPartId, "PartOnTable", 1)
+                  Dim NewPart As New Print3dPartVM(nPartId, nPrintPartLayerId, nReferenceLayerId, nFrameId, nMachStartLayerId, nRibsLayerId, nShellNumberLayerId, nAuxSolidsLayerId, nOthersLayerId, sFilePath)
+                  Map.refTopPanelVM.PartList.Add(NewPart)
+               Next
+            End If
+            'EgtAddMachGroup("3dPrint")
+            'EgtSetTable("Tab")
+
+            'Dim nRawId As Integer = EgtAddRawPart(b3PrintSolid.Min, b3PrintSolid.DimX, b3PrintSolid.DimY, b3PrintSolid.DimZ, New Color3d(128, 128, 128, 30))
+            'EgtAddPartToRawPart(nPartId, b3PrintSolid.Min, nRawId)
+            'EgtMoveToCornerRawPart(nRawId, New Point3d(dPosX, dPosY, 0), MCH_CR.BL)
+
+            'EgtResetCurrMachGroup()
+
+            ' seleziono ultimo pezzo aggiunto
+            Map.refTopPanelVM.SelLastPart()
+            ' elimino vecchio pezzo d'importazione
+            EgtErase(m_nImportedPartId)
+
+            EgtDraw()
+
+         Case ManagePartType.MODIFY
+            ' nulla da fare
+      End Select
+      ' ripristino modalita' standard
+      Map.refTopPanelVM.SelPage = Pages.MODIFY
+   End Sub
+
+#End Region    ' Ok
+
+#Region "Cancel"
+
+   Public ReadOnly Property Cancel_Command As ICommand
+      Get
+         If m_cmdCancel Is Nothing Then
+            m_cmdCancel = New Command(AddressOf Cancel)
+         End If
+         Return m_cmdCancel
+      End Get
+   End Property
+
+   Public Sub Cancel()
+      ' elimino pezzo importato
+      EgtErase(m_nImportedPartId)
+      EgtDraw()
+      ' se ci sono pezzi
+      If Map.refTopPanelVM.PartList.Count > 0 Then
+         ' ripristino modalita' standard
+         Map.refTopPanelVM.SelPage = Pages.MODIFY
+      Else
+         Map.refTopPanelVM.SelPage = Pages.NULL
+      End If
+   End Sub
+
+#End Region    ' Cancel
+
+#End Region    ' COMMANDS
+
+End Class

Icarus/ManagePartPanel/ManagePartUtility.vb

@@ -0,0 +1,907 @@
+Imports System.Collections.ObjectModel
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class PartManager_GeomEntity
+   Inherits VMBase
+
+   ' layer sotto cui e' questa entita'
+   Private m_OrigLayer As ManagePart_Layer
+   Friend ReadOnly Property OrigLayer As ManagePart_Layer
+      Get
+         Return m_OrigLayer
+      End Get
+   End Property
+
+   Private m_bIsSelected As Boolean
+   Public Property bIsSelected As Boolean
+      Get
+         Return m_bIsSelected
+      End Get
+      Set(value As Boolean)
+         m_bIsSelected = value
+         ' seleziono in scena
+         EgtDeselectAll()
+         If Not IsNothing(value) Then
+            EgtSelectObj(m_nId)
+         End If
+         EgtDraw()
+         ' segno come elemento selezionato in treeview
+         Map.refManagePartPanelVM.SetSelPartManager_GeomEntity(Me)
+      End Set
+   End Property
+
+   Private m_nId As Integer = GDB_ID.NULL
+   Public ReadOnly Property nId As Integer
+      Get
+         Return m_nId
+      End Get
+   End Property
+
+   Private m_sName As String
+   Public Property sName As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+         SetTextBoxVisibility(False)
+         NotifyPropertyChanged(NameOf(sName))
+         If Map.refManagePartPanelVM.Type = ManagePartPanelVM.ManagePartType.MODIFY Then
+            EgtSetInfo(m_nId, ENTITY_NAME, value)
+         End If
+         Map.refManagePartPanelVM.SetIsEnabled(True)
+      End Set
+   End Property
+
+   Public ReadOnly Property ghName As String
+      Get
+         Return m_nId
+      End Get
+   End Property
+
+   Private m_MenuList As New ObservableCollection(Of GeomEntity_MenuItem)
+   Public Property MenuList As ObservableCollection(Of GeomEntity_MenuItem)
+      Get
+         Return m_MenuList
+      End Get
+      Set(value As ObservableCollection(Of GeomEntity_MenuItem))
+         m_MenuList = value
+      End Set
+   End Property
+
+   Private m_UserShouldEditValueNow As Boolean = False
+   Public Property UserShouldEditValueNow As Boolean
+      Get
+         Return m_UserShouldEditValueNow
+      End Get
+      Set(value As Boolean)
+         m_UserShouldEditValueNow = value
+      End Set
+   End Property
+   Friend Sub SetUserShouldEditValueNow()
+      m_UserShouldEditValueNow = True
+      NotifyPropertyChanged(NameOf(UserShouldEditValueNow))
+      m_UserShouldEditValueNow = False
+      NotifyPropertyChanged(NameOf(UserShouldEditValueNow))
+   End Sub
+
+   Private m_TextBox_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property TextBox_Visibility As Visibility
+      Get
+         Return m_TextBox_Visibility
+      End Get
+   End Property
+
+   Private m_TextBlock_Visibility As Visibility = Visibility.Visible
+   Public ReadOnly Property TextBlock_Visibility As Visibility
+      Get
+         Return m_TextBlock_Visibility
+      End Get
+   End Property
+
+   ' Definizione comandi
+   Private m_cmdGeomEntityDoubleClick As ICommand
+
+   Sub New(OrigLayer As ManagePart_Layer, nId As Integer)
+      m_nId = nId
+      Dim sName As String = ""
+      EgtGetInfo(m_nId, ENTITY_NAME, sName)
+      m_sName = If(String.IsNullOrWhiteSpace(sName), m_nId, sName)
+      m_OrigLayer = OrigLayer
+      ' aggiungo voci layer a contextmenu
+      UpdateContextMenu()
+   End Sub
+
+   Friend Sub UpdateContextMenu()
+      m_MenuList.Clear()
+      Select Case Map.refManagePartPanelVM.Type
+         Case ManagePartPanelVM.ManagePartType.IMPORT
+            Dim bIsSurface As Boolean = False
+            For Each ProjectPart In Map.refManagePartPanelVM.ManagerPartList
+               ' verifico in quali layer puo' andare questo elemento
+               Dim EntityType As GDB_TY = EgtGetType(nId)
+               Dim nPrintSolidCount As Integer = 0
+               Dim ManageLayer As ManagePart_Layer = ProjectPart.LayerList.FirstOrDefault(Function(x) x.Type = ManagePart_Layer.LayerType.PRINT_SOLID)
+               If Not IsNothing(ManageLayer) Then
+                  nPrintSolidCount = ManageLayer.EntityList.Count
+               End If
+               Select Case EntityType
+                  Case GDB_TY.GEO_POINT, GDB_TY.CRV_COMPO, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
+                     If Not IsNothing(OrigLayer) Then
+                        ' recupero i layer
+                        If Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.MACH_START Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.MACH_START, ProjectPart))
+                        If Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.OTHERS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     Else
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.MACH_START, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     End If
+                  Case GDB_TY.SRF_MESH
+                     bIsSurface = True
+                     If Not IsNothing(OrigLayer) Then
+                        ' verifico se volume chiuso
+                        If nPrintSolidCount = 0 AndAlso (Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.PRINT_SOLID) Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.PRINT_SOLID, ProjectPart))
+                        If Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.SHELL_NUMBER Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.SHELL_NUMBER, ProjectPart))
+                        If Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.AUX_SOLIDS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.AUX_SOLIDS, ProjectPart))
+                        If Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.RIBS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.RIBS, ProjectPart))
+                        If Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.OTHERS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     Else
+                        If nPrintSolidCount = 0 Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.PRINT_SOLID, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.SHELL_NUMBER, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.AUX_SOLIDS, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.RIBS, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     End If
+               End Select
+            Next
+            If bIsSurface Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.NEWPART))
+            m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.CHANGENAME))
+            m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.DELETE))
+         Case ManagePartPanelVM.ManagePartType.MODIFY
+            Dim bIsSurface As Boolean = False
+            For Each ProjectPart In Map.refTopPanelVM.PartList
+               ' verifico in quali layer puo' andare questo elemento
+               Dim EntityType As GDB_TY = EgtGetType(nId)
+               Dim nPrintSolidCount As Integer = EgtGetGroupObjs(ProjectPart.nPrintSolidLayerId)
+               Select Case EntityType
+                  Case GDB_TY.GEO_POINT, GDB_TY.CRV_COMPO, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
+                     If Not IsNothing(OrigLayer) Then
+                        ' recupero i layer
+                        If ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.MACH_START Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.MACH_START, ProjectPart))
+                        If ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.OTHERS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     Else
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.MACH_START, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     End If
+                  Case GDB_TY.SRF_MESH
+                     bIsSurface = True
+                     If Not IsNothing(OrigLayer) Then
+                        ' verifico se volume chiuso
+                        If nPrintSolidCount = 0 AndAlso (ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.PRINT_SOLID) Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.PRINT_SOLID, ProjectPart))
+                        If ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.SHELL_NUMBER Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.SHELL_NUMBER, ProjectPart))
+                        If ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.AUX_SOLIDS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.AUX_SOLIDS, ProjectPart))
+                        If ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.RIBS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.RIBS, ProjectPart))
+                        If ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.OTHERS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     Else
+                        If nPrintSolidCount = 0 Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.PRINT_SOLID, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.SHELL_NUMBER, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.AUX_SOLIDS, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.RIBS, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     End If
+               End Select
+            Next
+            If bIsSurface Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.NEWPART))
+            m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.CHANGENAME))
+            m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.DELETE))
+      End Select
+   End Sub
+
+   Friend Sub UpdateOrigLayer(NewLayer As ManagePart_Layer)
+      m_OrigLayer = NewLayer
+   End Sub
+
+   Friend Sub SetTextBoxVisibility(bValue As Boolean)
+      m_TextBox_Visibility = If(bValue, Visibility.Visible, Visibility.Collapsed)
+      m_TextBlock_Visibility = If(Not bValue, Visibility.Visible, Visibility.Collapsed)
+      NotifyPropertyChanged(NameOf(TextBox_Visibility))
+      NotifyPropertyChanged(NameOf(TextBlock_Visibility))
+      If bValue Then SetUserShouldEditValueNow()
+   End Sub
+
+#Region "COMMANDS"
+
+#Region "GeomEntityDoubleClick"
+
+   Public ReadOnly Property GeomEntityDoubleClick_Command As ICommand
+      Get
+         If m_cmdGeomEntityDoubleClick Is Nothing Then
+            m_cmdGeomEntityDoubleClick = New Command(AddressOf GeomEntityDoubleClick)
+         End If
+         Return m_cmdGeomEntityDoubleClick
+      End Get
+   End Property
+
+   Public Sub GeomEntityDoubleClick()
+      If Not IsNothing(Map.refManagePartPanelVM.SelManagerLayer) Then
+         Map.refManagePartPanelVM.ImportedEntityList.Remove(Me)
+         ' aggiorno riferimenti layer e context menu
+         UpdateOrigLayer(Map.refManagePartPanelVM.SelManagerLayer)
+         UpdateContextMenu()
+         Map.refManagePartPanelVM.SelManagerLayer.EntityList.Add(Me)
+      End If
+   End Sub
+
+#End Region    ' ImportedEntity
+
+#End Region    ' COMMANDS
+
+End Class
+
+Public Class ManagePart_Part
+   Inherits VMBase
+
+   Private m_bIsSelected As Boolean
+   Public Property bIsSelected As Boolean
+      Get
+         Return m_bIsSelected
+      End Get
+      Set(value As Boolean)
+         m_bIsSelected = value
+         Map.refManagePartPanelVM.SetSelManagerPart(Me)
+      End Set
+   End Property
+
+   Private m_nId As Integer
+   Public ReadOnly Property nId As Integer
+      Get
+         Return m_nId
+      End Get
+   End Property
+
+   Private m_PrintPart As Print3dPartVM
+   Public ReadOnly Property PrintPart As Print3dPartVM
+      Get
+         Return m_PrintPart
+      End Get
+   End Property
+
+   Private m_sName As String
+   Public Property sName As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+         SetTextBoxVisibility(False)
+         NotifyPropertyChanged(NameOf(sName))
+         If Map.refManagePartPanelVM.Type = ManagePartPanelVM.ManagePartType.MODIFY Then
+            m_PrintPart.UpdateName(value)
+            EgtSetInfo(m_PrintPart.nPartId, PART_NAME, value)
+         End If
+         Map.refManagePartPanelVM.SetIsEnabled(True)
+      End Set
+   End Property
+
+   Private m_MenuList As New List(Of ManagerPart_MenuItem)
+   Public Property MenuList As List(Of ManagerPart_MenuItem)
+      Get
+         Return m_MenuList
+      End Get
+      Set(value As List(Of ManagerPart_MenuItem))
+         m_MenuList = value
+      End Set
+   End Property
+
+   Private m_LayerList As New ObservableCollection(Of ManagePart_Layer)
+   Public ReadOnly Property LayerList As ObservableCollection(Of ManagePart_Layer)
+      Get
+         Return m_LayerList
+      End Get
+   End Property
+
+   Private m_UserShouldEditValueNow As Boolean = False
+   Public Property UserShouldEditValueNow As Boolean
+      Get
+         Return m_UserShouldEditValueNow
+      End Get
+      Set(value As Boolean)
+         m_UserShouldEditValueNow = value
+      End Set
+   End Property
+   Friend Sub SetUserShouldEditValueNow()
+      m_UserShouldEditValueNow = True
+      NotifyPropertyChanged(NameOf(UserShouldEditValueNow))
+      m_UserShouldEditValueNow = False
+      NotifyPropertyChanged(NameOf(UserShouldEditValueNow))
+   End Sub
+
+   Private m_TextBox_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property TextBox_Visibility As Visibility
+      Get
+         Return m_TextBox_Visibility
+      End Get
+   End Property
+
+   Private m_TextBlock_Visibility As Visibility = Visibility.Visible
+   Public ReadOnly Property TextBlock_Visibility As Visibility
+      Get
+         Return m_TextBlock_Visibility
+      End Get
+   End Property
+
+   Sub New(PrintPart As Print3dPartVM)
+      m_PrintPart = PrintPart
+      'NotifyPropertyChanged(NameOf(sName))
+      If Map.refManagePartPanelVM.ManagerPartList.Count = 0 Then
+         m_nId = 1
+      Else
+         m_nId = Map.refManagePartPanelVM.ManagerPartList.Max(Function(x) x.nId) + 1
+      End If
+      If Not IsNothing(PrintPart) Then
+         m_sName = m_PrintPart.sName
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.PRINT_SOLID, "Print", PrintPart))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.MACH_START, "Layer Start", PrintPart))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.RIBS, "Ribs", PrintPart))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.SHELL_NUMBER, "Reduce Shell Number", PrintPart))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.AUX_SOLIDS, "Filled Solids", PrintPart))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.OTHERS, "Others", PrintPart))
+      Else
+         m_sName = "Part" & m_nId
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.PRINT_SOLID, "Print"))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.MACH_START, "Layer Start"))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.RIBS, "Ribs"))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.SHELL_NUMBER, "Reduce Shell Number"))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.AUX_SOLIDS, "Filled Solids"))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.OTHERS, "Others"))
+      End If
+      ' creo context menu per cambio nome ed eliminazione
+      m_MenuList.Add(New ManagerPart_MenuItem(Me, ManagerPart_MenuItem.PartMenuCmd.CHANGENAME))
+      m_MenuList.Add(New ManagerPart_MenuItem(Me, ManagerPart_MenuItem.PartMenuCmd.DELETE))
+   End Sub
+
+   Friend Sub SetTextBoxVisibility(bValue As Boolean)
+      m_TextBox_Visibility = If(bValue, Visibility.Visible, Visibility.Collapsed)
+      m_TextBlock_Visibility = If(Not bValue, Visibility.Visible, Visibility.Collapsed)
+      NotifyPropertyChanged(NameOf(TextBox_Visibility))
+      NotifyPropertyChanged(NameOf(TextBlock_Visibility))
+      If bValue Then SetUserShouldEditValueNow()
+   End Sub
+
+End Class
+
+Public Class ManagePart_Layer
+   Inherits VMBase
+
+   Public Enum LayerType As Integer
+      PRINT_SOLID = 1
+      MACH_START = 2
+      RIBS = 3
+      SHELL_NUMBER = 4
+      AUX_SOLIDS = 5
+      OTHERS = 7
+      CHANGENAME = 15
+      DELETE = 16
+      NEWPART = 17
+   End Enum
+
+   ' enita' di origine
+   Private m_OrigPart As ManagePart_Part
+   Public ReadOnly Property OrigPart As ManagePart_Part
+      Get
+         Return m_OrigPart
+      End Get
+   End Property
+
+   Private m_nLayerId As Integer
+
+   Private m_bIsSelected As Boolean
+   Public Property bIsSelected As Boolean
+      Get
+         Return m_bIsSelected
+      End Get
+      Set(value As Boolean)
+         m_bIsSelected = value
+         Map.refManagePartPanelVM.SetSelManagerLayer(Me)
+      End Set
+   End Property
+
+   Private m_Type As LayerType
+   Public Property Type As LayerType
+      Get
+         Return m_Type
+      End Get
+      Set(value As LayerType)
+         m_Type = value
+      End Set
+   End Property
+
+   Private m_sName As String
+   Public Property sName As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+      End Set
+   End Property
+
+   Private m_EntityList As New ObservableCollection(Of PartManager_GeomEntity)
+   Public Property EntityList As ObservableCollection(Of PartManager_GeomEntity)
+      Get
+         Return m_EntityList
+      End Get
+      Set(value As ObservableCollection(Of PartManager_GeomEntity))
+         m_EntityList = value
+      End Set
+   End Property
+
+   Sub New(OrigPart As ManagePart_Part, Type As LayerType, sName As String)
+      m_OrigPart = OrigPart
+      m_Type = Type
+      m_sName = sName
+   End Sub
+
+   Sub New(OrigPart As ManagePart_Part, Type As LayerType, sName As String, PrintPart As Print3dPartVM)
+      m_OrigPart = OrigPart
+      m_Type = Type
+      m_sName = sName
+      Select Case Type
+         Case LayerType.PRINT_SOLID
+            m_nLayerId = PrintPart.nPrintSolidLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            If nEntityId <> GDB_ID.NULL Then
+               m_EntityList.Add(New PartManager_GeomEntity(Me, nEntityId))
+            End If
+         Case LayerType.MACH_START
+            m_nLayerId = PrintPart.nMachStartLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            While nEntityId <> GDB_ID.NULL
+               m_EntityList.Add(New PartManager_GeomEntity(Me, nEntityId))
+               nEntityId = EgtGetNext(nEntityId)
+            End While
+         Case LayerType.RIBS
+            m_nLayerId = PrintPart.nRibsLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            While nEntityId <> GDB_ID.NULL
+               Dim RibType As Integer = RibEntity.RibTypes.FROMDRAW
+               EgtGetInfo(nEntityId, KEY_RIB_TYPE, RibType)
+               If RibType = RibEntity.RibTypes.FROMIMPORT Then
+                  m_EntityList.Add(New PartManager_GeomEntity(Me, nEntityId))
+               End If
+               nEntityId = EgtGetNext(nEntityId)
+            End While
+         Case LayerType.SHELL_NUMBER
+            m_nLayerId = PrintPart.nShellNumberLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            While nEntityId <> GDB_ID.NULL
+               Dim ShellType As Integer = ShellNumberEntity.ShellNumberTypes.FROMDRAW
+               EgtGetInfo(nEntityId, KEY_SHELLNBR_TYPE, ShellType)
+               If ShellType = ShellNumberEntity.ShellNumberTypes.FROMIMPORT Then
+                  m_EntityList.Add(New PartManager_GeomEntity(Me, nEntityId))
+               End If
+               nEntityId = EgtGetNext(nEntityId)
+            End While
+         Case LayerType.AUX_SOLIDS
+            m_nLayerId = PrintPart.nAuxSolidsLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            While nEntityId <> GDB_ID.NULL
+               'Dim ShellType As Integer = ShellNumberEntity.ShellNumberTypes.FROMDRAW
+               'EgtGetInfo(nEntityId, KEY_SHELLNBR_TYPE, ShellType)
+               'If ShellType = ShellNumberEntity.ShellNumberTypes.FROMIMPORT Then
+               m_EntityList.Add(New PartManager_GeomEntity(Me, nEntityId))
+               'End If
+               nEntityId = EgtGetNext(nEntityId)
+            End While
+         Case LayerType.OTHERS
+            m_nLayerId = PrintPart.nOthersLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            While nEntityId <> GDB_ID.NULL
+               m_EntityList.Add(New PartManager_GeomEntity(Me, nEntityId))
+               nEntityId = EgtGetNext(nEntityId)
+            End While
+      End Select
+   End Sub
+
+End Class
+
+Public Class GeomEntity_MenuItem
+   Inherits VMBase
+
+   ' enita' di origine
+   Private m_OrigEntity As PartManager_GeomEntity
+
+   ' pezzo in cui spostare
+   Private m_GeomPart As Print3dPartVM
+   Private m_Part As ManagePart_Part
+
+   ' tipo del layer indicato
+   Private m_Type As ManagePart_Layer.LayerType
+   Public Property Type As ManagePart_Layer.LayerType
+      Get
+         Return m_Type
+      End Get
+      Set(value As ManagePart_Layer.LayerType)
+         m_Type = value
+      End Set
+   End Property
+
+   Public ReadOnly Property sMsg As String
+      Get
+         Dim sType As String = ""
+         Select Case m_Type
+            Case ManagePart_Layer.LayerType.PRINT_SOLID
+               sType = "Print"
+            Case ManagePart_Layer.LayerType.MACH_START
+               sType = "Layer Start"
+            Case ManagePart_Layer.LayerType.RIBS
+               sType = "Ribs"
+            Case ManagePart_Layer.LayerType.SHELL_NUMBER
+               sType = "Reduce shell number"
+            Case ManagePart_Layer.LayerType.AUX_SOLIDS
+               sType = "Filled Solids"
+            Case ManagePart_Layer.LayerType.OTHERS
+               sType = "Others"
+            Case ManagePart_Layer.LayerType.NEWPART
+               Return "Create New Part"
+            Case ManagePart_Layer.LayerType.CHANGENAME
+               Return "Change Name"
+            Case ManagePart_Layer.LayerType.DELETE
+               Return "Delete Entity"
+         End Select
+         Dim PartName As String = ""
+         If Map.refManagePartPanelVM.ManagerPartList.Count > 1 Then
+            Dim NewPart As ManagePart_Part = Nothing
+            Select Case Map.refManagePartPanelVM.Type
+               Case ManagePartPanelVM.ManagePartType.IMPORT
+                  NewPart = Map.refManagePartPanelVM.ManagerPartList.FirstOrDefault(Function(x) x Is m_Part)
+               Case ManagePartPanelVM.ManagePartType.MODIFY
+                  NewPart = Map.refManagePartPanelVM.ManagerPartList.FirstOrDefault(Function(x) x.PrintPart.nPartId = m_GeomPart.nPartId)
+            End Select
+            If Not IsNothing(NewPart) Then
+               PartName = " (" & NewPart.sName & ")"
+            End If
+         End If
+         Return "Move to " & sType & PartName
+      End Get
+   End Property
+
+   ' Definizione comando
+   Private m_cmdCommand As ICommand
+
+   Sub New(OrigEntity As PartManager_GeomEntity, Type As ManagePart_Layer.LayerType, GeomPart As Print3dPartVM)
+      m_OrigEntity = OrigEntity
+      m_Type = Type
+      m_GeomPart = GeomPart
+   End Sub
+
+   Sub New(OrigEntity As PartManager_GeomEntity, Type As ManagePart_Layer.LayerType, Part As ManagePart_Part)
+      m_OrigEntity = OrigEntity
+      m_Type = Type
+      m_Part = Part
+   End Sub
+
+   Sub New(OrigEntity As PartManager_GeomEntity, Type As ManagePart_Layer.LayerType)
+      m_OrigEntity = OrigEntity
+      m_Type = Type
+   End Sub
+
+#Region "Command"
+
+   Public ReadOnly Property MenuItem_Command As ICommand
+      Get
+         If m_cmdCommand Is Nothing Then
+            m_cmdCommand = New Command(AddressOf Command)
+         End If
+         Return m_cmdCommand
+      End Get
+   End Property
+
+   Public Sub Command()
+      If m_Type = ManagePart_Layer.LayerType.CHANGENAME Then
+         m_OrigEntity.SetTextBoxVisibility(True)
+         Map.refManagePartPanelVM.SetIsEnabled(True)
+         Return
+      ElseIf m_Type = ManagePart_Layer.LayerType.DELETE Then
+         If MessageBox.Show("Are you sure you want to delete this entity?", "Delete confirmation", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+            EgtErase(m_OrigEntity.nId)
+            ' se l'entita' e' gia' in lista pezzi
+            If Not IsNothing(m_OrigEntity.OrigLayer) Then
+               ' elimino dalla lista pezzi
+               m_OrigEntity.OrigLayer.EntityList.Remove(m_OrigEntity)
+            Else
+               ' altrimenti lo elimino dalla lista entita' importate
+               Map.refManagePartPanelVM.ImportedEntityList.Remove(m_OrigEntity)
+            End If
+            EgtDraw()
+         End If
+         Return
+      ElseIf m_Type = ManagePart_Layer.LayerType.NEWPART Then
+         Select Case Map.refManagePartPanelVM.Type
+            Case ManagePartPanelVM.ManagePartType.IMPORT
+               Dim NewPart As ManagePart_Part = New ManagePart_Part(Nothing)
+               Map.refManagePartPanelVM.ManagerPartList.Add(NewPart)
+               ' elimino entity dalla lista entita' importate
+               Map.refManagePartPanelVM.ImportedEntityList.Remove(m_OrigEntity)
+               If Not IsNothing(NewPart) Then
+                  Dim NewLayer As ManagePart_Layer = NewPart.LayerList.FirstOrDefault(Function(x) x.Type = ManagePart_Layer.LayerType.PRINT_SOLID)
+                  If Not IsNothing(NewLayer) Then
+                     NewLayer.EntityList.Add(m_OrigEntity)
+                     ' aggiorno riferimenti nell'entita'
+                     m_OrigEntity.UpdateOrigLayer(NewLayer)
+                  End If
+               End If
+               ' aggiorno i contextmenu di tutti gli entity
+               Map.refManagePartPanelVM.UpdateAllEntityContextMenu()
+            Case ManagePartPanelVM.ManagePartType.MODIFY
+               ' recupero path da vecchio pezzo
+               Dim sFilePath As String = ""
+               EgtGetInfo(m_OrigEntity.OrigLayer.OrigPart.PrintPart.nPartId, FILE_PATH, sFilePath)
+               'Dim frImportedPart As New Frame3d
+               'EgtGetGroupGlobFrame(m_nImportedPartId, frImportedPart)
+               ' creo pezzo
+               Dim nPartId As Integer = EgtCreateGroup(GDB_ID.ROOT)  ', frImportedPart)
+               EgtSetName(nPartId, PART)
+               Dim nFrameId As Integer = GDB_ID.NULL
+               Dim b3PrintSolid As New BBox3d
+               ' creo layer solido di stampa
+               Dim nPrintPartLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nPrintPartLayerId, PRINT_SOLID)
+               EgtRelocateGlob(m_OrigEntity.nId, nPrintPartLayerId, GDB_POS.LAST_SON)
+               ' calcolo box superficie per creazione riferimento
+               EgtGetBBoxGlob(m_OrigEntity.nId, GDB_BB.STANDARD, b3PrintSolid)
+               ' coloro l'entita'
+               EgtSetColor(m_OrigEntity.nId, GeomEntityColors.c3Print)
+               ' creo layer mach start
+               Dim nMachStartLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nMachStartLayerId, LAY_MACH_START)
+               Dim nMachStartId As Integer = GDB_ID.NULL
+               ' creo punto di partenza
+               Dim ptStart As Point3d = b3PrintSolid.Center() - 0.6 * b3PrintSolid.DimY() * Vector3d.Y_AX() - 0.5 * b3PrintSolid.DimZ() * Vector3d.Z_AX()
+               nMachStartId = EgtCreateGeoPoint(nMachStartLayerId, ptStart, GDB_RT.GLOB)
+               EgtSetName(nMachStartId, START_GEOM)
+               ' coloro l'entita' di rosso
+               EgtSetColor(nMachStartId, GeomEntityColors.c3MachStart)
+               ' creo layer ribs
+               Dim nRibsLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nRibsLayerId, LAY_RIBS)
+               ' creo layer shell number
+               Dim nShellNumberLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nShellNumberLayerId, LAY_SHELL_NBR)
+               ' creo layer aux
+               Dim nAuxSolidsLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nAuxSolidsLayerId, LAY_AUX_SOLIDS)
+               ' creo layer others
+               Dim nOthersLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nOthersLayerId, LAY_OTHERS)
+               ' aggiungo riferimento
+               Dim nReferenceLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nReferenceLayerId, LAY_REFERENCE)
+               ' Creo riferimento 
+               Dim ptOrig As New Point3d(b3PrintSolid.Min())
+               Dim frPrintSolid As New Frame3d(ptOrig)
+               nFrameId = EgtCreateGeoFrame(nReferenceLayerId, frPrintSolid, GDB_RT.GLOB)
+               If nFrameId Then
+                  EgtSetName(nFrameId, FRAME_PART)
+                  EgtSetMode(nFrameId, GDB_MD.LOCKED)
+               End If
+               EgtSetInfo(nReferenceLayerId, KEY_REFERENCE, ReferenceBtn.References.BL)
+               ' appoggio il pezzo sulla tavola
+               EgtMove(nPartId, New Vector3d(0, 0, -b3PrintSolid.Min.z))
+               ' lo aggiungo a lista pezzi 
+               EgtSetInfo(nPartId, FILE_PATH, sFilePath)
+               EgtSetInfo(nPartId, "PartOnTable", 1)
+               Dim NewPart As New Print3dPartVM(nPartId, nPrintPartLayerId, nReferenceLayerId, nFrameId, nMachStartLayerId, nRibsLayerId, nShellNumberLayerId, nAuxSolidsLayerId, nOthersLayerId, sFilePath)
+               Map.refTopPanelVM.PartList.Add(NewPart)
+               Dim ManagePart_Part As ManagePart_Part = New ManagePart_Part(NewPart)
+               ' elimino da posizione originale
+               m_OrigEntity.OrigLayer.EntityList.Remove(m_OrigEntity)
+               'Dim bUpdateAllContextMenu As Boolean = False
+               'Dim NewLayer As ManagePart_Layer = ManagePart_Part.LayerList.FirstOrDefault(Function(x) x.Type = ManagePart_Layer.LayerType.PRINT_SOLID)
+               'If Not IsNothing(NewLayer) Then
+               '   NewLayer.EntityList.Add(m_OrigEntity)
+               '   ' aggiorno riferimenti nell'entita'
+               '   m_OrigEntity.UpdateOrigLayer(NewLayer)
+               'End If
+               EgtSetInfo(nPartId, PART_NAME, ManagePart_Part.sName)
+               ' lo aggiungo a lista
+               Map.refManagePartPanelVM.ManagerPartList.Add(ManagePart_Part)
+               ' aggiorno riferimenti nel context menu item
+               Map.refManagePartPanelVM.UpdateAllEntityContextMenu()
+         End Select
+         Return
+      End If
+      Select Case Map.refManagePartPanelVM.Type
+         Case ManagePartPanelVM.ManagePartType.IMPORT
+            ' se l'entita' e' gia' in lista pezzi
+            If Not IsNothing(m_OrigEntity.OrigLayer) Then
+               ' elimino dalla lista pezzi
+               m_OrigEntity.OrigLayer.EntityList.Remove(m_OrigEntity)
+            Else
+               ' altrimenti lo elimino dalla lista entita' importate
+               Map.refManagePartPanelVM.ImportedEntityList.Remove(m_OrigEntity)
+            End If
+            Dim NewPart As ManagePart_Part = Map.refManagePartPanelVM.ManagerPartList.FirstOrDefault(Function(x) x Is m_Part)
+            If Not IsNothing(NewPart) Then
+               Dim NewLayer As ManagePart_Layer = NewPart.LayerList.FirstOrDefault(Function(x) x.Type = m_Type)
+               If Not IsNothing(NewLayer) Then
+                  NewLayer.EntityList.Add(m_OrigEntity)
+                  ' aggiorno riferimenti nell'entita'
+                  m_OrigEntity.UpdateOrigLayer(NewLayer)
+               End If
+            End If
+            ' aggiorno riferimenti nel context menu item
+            m_OrigEntity.UpdateContextMenu()
+         Case ManagePartPanelVM.ManagePartType.MODIFY
+            ' recupero layer da pezzo
+            Dim nLayerId As Integer = GDB_ID.NULL
+            Select Case m_Type
+               Case ManagePart_Layer.LayerType.PRINT_SOLID
+                  nLayerId = m_GeomPart.nPrintSolidLayerId
+               Case ManagePart_Layer.LayerType.MACH_START
+                  nLayerId = m_GeomPart.nMachStartLayerId
+               Case ManagePart_Layer.LayerType.RIBS
+                  nLayerId = m_GeomPart.nRibsLayerId
+               Case ManagePart_Layer.LayerType.SHELL_NUMBER
+                  nLayerId = m_GeomPart.nShellNumberLayerId
+               Case ManagePart_Layer.LayerType.AUX_SOLIDS
+                  nLayerId = m_GeomPart.nAuxSolidsLayerId
+               Case ManagePart_Layer.LayerType.OTHERS
+                  nLayerId = m_GeomPart.nOthersLayerId
+            End Select
+            ' sposto entita'
+            If EgtRelocateGlob(m_OrigEntity.nId, nLayerId) Then
+               ' elimino info vecchio layer
+               Select Case m_OrigEntity.OrigLayer.Type
+                  Case ManagePart_Layer.LayerType.PRINT_SOLID
+                     EgtResetMark(m_OrigEntity.nId)
+                  Case ManagePart_Layer.LayerType.MACH_START
+                  Case ManagePart_Layer.LayerType.RIBS
+                     EgtRemoveInfo(m_OrigEntity.nId, KEY_RIB_TYPE)
+                  Case ManagePart_Layer.LayerType.SHELL_NUMBER
+                     EgtRemoveInfo(m_OrigEntity.nId, KEY_SHELLNBR_TYPE)
+                  Case ManagePart_Layer.LayerType.AUX_SOLIDS
+                     EgtRemoveInfo(m_OrigEntity.nId, KEY_AUXSOLID_TYPE)
+                  Case ManagePart_Layer.LayerType.OTHERS
+               End Select
+               ' sposto in lista
+               m_OrigEntity.OrigLayer.EntityList.Remove(m_OrigEntity)
+               Dim bUpdateAllContextMenu As Boolean = False
+               Dim NewPart As ManagePart_Part = Map.refManagePartPanelVM.ManagerPartList.FirstOrDefault(Function(x) x.PrintPart.nPartId = m_GeomPart.nPartId)
+               If Not IsNothing(NewPart) Then
+                  Dim NewLayer As ManagePart_Layer = NewPart.LayerList.FirstOrDefault(Function(x) x.Type = m_Type)
+                  If Not IsNothing(NewLayer) Then
+                     NewLayer.EntityList.Add(m_OrigEntity)
+                     bUpdateAllContextMenu = (m_OrigEntity.OrigLayer.Type = ManagePart_Layer.LayerType.PRINT_SOLID) OrElse (NewLayer.Type = ManagePart_Layer.LayerType.PRINT_SOLID)
+                     ' aggiorno riferimenti nell'entita'
+                     m_OrigEntity.UpdateOrigLayer(NewLayer)
+                  End If
+               End If
+               ' aggiungo info nuovo layer
+               Select Case m_Type
+                  Case ManagePart_Layer.LayerType.PRINT_SOLID
+                     EgtSetName(m_OrigEntity.nId, PRINT_SOLID)
+                     EgtSetColor(m_OrigEntity.nId, c3Print)
+                  Case ManagePart_Layer.LayerType.MACH_START
+                     EgtSetName(m_OrigEntity.nId, LAY_MACH_START)
+                     EgtSetColor(m_OrigEntity.nId, c3MachStart)
+                  Case ManagePart_Layer.LayerType.RIBS
+                     EgtSetName(m_OrigEntity.nId, LAY_RIBS)
+                     EgtSetInfo(m_OrigEntity.nId, KEY_RIB_TYPE, RibEntity.RibTypes.FROMIMPORT)
+                     EgtSetColor(m_OrigEntity.nId, c3Rib)
+                  Case ManagePart_Layer.LayerType.SHELL_NUMBER
+                     EgtSetName(m_OrigEntity.nId, LAY_SHELL_NBR)
+                     EgtSetInfo(m_OrigEntity.nId, KEY_SHELLNBR_TYPE, ShellNumberEntity.ShellNumberTypes.FROMIMPORT)
+                     EgtSetColor(m_OrigEntity.nId, c3ShellNumber)
+                  Case ManagePart_Layer.LayerType.AUX_SOLIDS
+                     EgtSetName(m_OrigEntity.nId, LAY_AUX_SOLIDS)
+                     EgtSetInfo(m_OrigEntity.nId, KEY_AUXSOLID_TYPE, RibEntity.RibTypes.FROMIMPORT)
+                     EgtSetColor(m_OrigEntity.nId, c3AuxSolids)
+                  Case ManagePart_Layer.LayerType.OTHERS
+                     EgtSetName(m_OrigEntity.nId, LAY_OTHERS)
+                     EgtSetColor(m_OrigEntity.nId, c3Others)
+               End Select
+               EgtDraw()
+               ' aggiorno riferimenti nel context menu item
+               If bUpdateAllContextMenu Then
+                  Map.refManagePartPanelVM.UpdateAllEntityContextMenu()
+               Else
+                  m_OrigEntity.UpdateContextMenu()
+               End If
+            End If
+      End Select
+   End Sub
+
+#End Region ' Command
+
+End Class
+
+Public Class ManagerPart_MenuItem
+   Inherits VMBase
+
+   Public Enum PartMenuCmd
+      CHANGENAME = 1
+      DELETE = 2
+   End Enum
+
+   Private m_OrigPart As ManagePart_Part
+
+   ' tipo del comando
+   Private m_Type As PartMenuCmd
+   Public Property Type As PartMenuCmd
+      Get
+         Return m_Type
+      End Get
+      Set(value As PartMenuCmd)
+         m_Type = value
+      End Set
+   End Property
+
+   Public ReadOnly Property sMsg As String
+      Get
+         Select Case m_Type
+            Case PartMenuCmd.CHANGENAME
+               Return "Change Name"
+            Case Else   ' PartMenuCmd.DELETE
+               Return "Delete Part"
+         End Select
+      End Get
+   End Property
+
+   ' Definizione comando
+   Private m_cmdCommand As ICommand
+
+   Sub New(OrigPart As ManagePart_Part, Type As PartMenuCmd)
+      m_OrigPart = OrigPart
+      m_Type = Type
+   End Sub
+
+#Region "Cancel"
+
+   Public ReadOnly Property MenuItem_Command As ICommand
+      Get
+         If m_cmdCommand Is Nothing Then
+            m_cmdCommand = New Command(AddressOf Command)
+         End If
+         Return m_cmdCommand
+      End Get
+   End Property
+
+   Public Sub Command()
+      Select Case m_Type
+         Case PartMenuCmd.CHANGENAME
+            m_OrigPart.SetTextBoxVisibility(True)
+            Map.refManagePartPanelVM.SetIsEnabled(True)
+         Case PartMenuCmd.DELETE
+            If Map.refManagePartPanelVM.ManagerPartList.Count <= 1 Then Return
+            Select Case Map.refManagePartPanelVM.Type
+               Case ManagePartPanelVM.ManagePartType.IMPORT
+                  For Each Layer In m_OrigPart.LayerList
+                     For Each Entity In Layer.EntityList
+                        ' le rimuovo da lista entita' pezzo
+                        Layer.EntityList.Remove(Entity)
+                        ' la rimetto in lista importati
+                        Map.refManagePartPanelVM.ImportedEntityList.Add(Entity)
+                     Next
+                  Next
+                  ' elimino pezzo da lista
+                  Map.refManagePartPanelVM.ManagerPartList.Remove(m_OrigPart)
+               Case ManagePartPanelVM.ManagePartType.MODIFY
+                  ' elimino pezzo geometrico
+                  EgtErase(m_OrigPart.PrintPart.nPartId)
+                  ' elimino pezzo da lista
+                  Map.refManagePartPanelVM.ManagerPartList.Remove(m_OrigPart)
+                  Dim bSelFirstPart As Boolean = m_OrigPart.PrintPart.nPartId = Map.refTopPanelVM.SelPart.nPartId
+                  ' elimino pezzo da lista Top
+                  Map.refTopPanelVM.PartList.Remove(m_OrigPart.PrintPart)
+                  EgtDraw()
+                  If bSelFirstPart Then Map.refTopPanelVM.SelFirstPart()
+            End Select
+            ' aggiorno riferimenti nel context menu item
+            Map.refManagePartPanelVM.UpdateAllEntityContextMenu()
+      End Select
+   End Sub
+
+#End Region ' Cancel
+
+End Class

Icarus/MaterialDb/Material.vb

@@ -204,7 +204,7 @@ Public Class Material
    End Sub
 
    Private Sub ReadAllParams()
-      'm_bSlicing45 = ReadMaterialParamDouble(m_nIndex, MAC_SLICING45, 0, CurrentMachine.sMachiningFilePath)
+      'm_nSlicingType = ReadMaterialParamDouble(m_nIndex, MAC_SLICINGTYPE, 0, CurrentMachine.sMachiningFilePath)
       'm_dStrandH = ReadMaterialParamDouble(m_nIndex, MAC_STRANDH, 0, CurrentMachine.sMachiningFilePath)
       'm_dStrandW = ReadMaterialParamDouble(m_nIndex, MAC_STRANDW, 0, CurrentMachine.sMachiningFilePath)
       'm_nStrandCount = ReadMaterialParamDouble(m_nIndex, MAC_STRANDCOUNT, 0, CurrentMachine.sMachiningFilePath)
@@ -871,16 +871,12 @@ Public Class CheckMaterialParam
    Sub New(Type As Params, nIndex As Integer)
       MyBase.New(Type)
       Select Case Type
-         'Case Params.SLICING45
-         '   m_bValue = ReadMaterialParamDouble(nIndex, MAC_SLICING45, 0)
       End Select
       m_bOrigValue = m_bValue
    End Sub
 
    Friend Overrides Sub WriteParamOnDb(nIndex As Integer)
       Select Case Type
-         'Case Params.SLICING45
-         '   WriteMaterialParam(nIndex, MAC_SLICING45, If(m_bValue, 1, 0))
       End Select
    End Sub
 

Icarus/ModifyPartPanel/ModifyPartPanelV.xaml

@@ -0,0 +1,120 @@
+<UserControl x:Class="ModifyPartPanelV"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:local="clr-namespace:Icarus"
+             Width="150"
+             Margin="5,0,0,0">
+   <Grid DockPanel.Dock="Left">
+      <Grid.RowDefinitions>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="Auto"/>
+      </Grid.RowDefinitions>
+      <Border Style="{StaticResource LeftPanelTitle_Border}">
+         <TextBlock Text="Part entity list"
+                    FontWeight="DemiBold"
+                    FontSize="14"/>
+      </Border>
+      <!--<DockPanel Grid.Row="1">
+         <Button DockPanel.Dock="Left"
+                 Content="+"
+                 FontSize="20"
+                 Command="{Binding AddPart_Command}"
+                 Style="{StaticResource LeftPanel_Button}"/>
+         <Button DockPanel.Dock="Left"
+                 Content="-"
+                 FontSize="20"
+                 Command="{Binding RemovePart_Command}"
+                 Style="{StaticResource LeftPanel_Button}"/>
+         <Button Content="Reference"
+                 Command="{Binding SetReference_Command}"
+                 Style="{StaticResource LeftPanel_TextButton}"/>
+      </DockPanel>-->
+      <TreeView Grid.Row="2" 
+                ItemsSource="{Binding ModifyPartList}"
+                MinHeight="300">
+         <TreeView.Resources>
+            <HierarchicalDataTemplate DataType="{x:Type local:ModifyPart}" 
+                                      ItemsSource="{Binding LayerList}">
+               <StackPanel Orientation="Horizontal">
+                  <Image Source="/Resources/TreeView/Folder.png" 
+                         Height="15"/>
+                  <TextBlock Text="{Binding ghName}" />
+               </StackPanel>
+            </HierarchicalDataTemplate>
+            <HierarchicalDataTemplate DataType="{x:Type local:ModifyLayer}" 
+                                      ItemsSource="{Binding EntityList, UpdateSourceTrigger=PropertyChanged}">
+               <StackPanel Orientation="Horizontal">
+                  <Image Source="/Resources/TreeView/Folder.png"
+                         Height="15"/>
+                  <TextBlock Text="{Binding sName}" />
+               </StackPanel>
+            </HierarchicalDataTemplate>
+            <HierarchicalDataTemplate DataType="{x:Type local:ModifyEntity}">
+               <StackPanel Orientation="Horizontal">
+                  <!--<Image Source="/WpfTutorialSamples;component/Images/user.png" Margin="0,0,5,0" />-->
+                  <TextBlock Text="{Binding ghName}" />
+                  <TextBlock Text="{Binding ghReference, UpdateSourceTrigger=PropertyChanged}"/>
+               </StackPanel>
+            </HierarchicalDataTemplate>
+            <!-- Menu' tasto destro -->
+            <ContextMenu x:Key="RowMenu" ItemsSource="{Binding MenuList}" >
+               <ContextMenu.ItemContainerStyle>
+                  <Style TargetType="MenuItem">
+                     <Setter Property="Command" Value="{Binding MenuItem_Command}"/>
+                     <Setter Property="CommandParameter" Value="{Binding MenuItem_Command}"/>
+                     <Setter Property="Header" Value="{Binding sMsg}"/>
+                  </Style>
+               </ContextMenu.ItemContainerStyle>
+            </ContextMenu>
+         </TreeView.Resources>
+         <TreeView.ItemContainerStyle>
+            <Style TargetType="{x:Type TreeViewItem}">
+               <Setter Property="IsSelected" Value="{Binding bIsSelected, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}" />
+               <Setter Property="IsExpanded" Value="True" />
+               <Setter Property="ContextMenu" Value="{StaticResource RowMenu}" />
+            </Style>
+         </TreeView.ItemContainerStyle>
+      </TreeView>
+      <!--<Border Grid.Row="3"
+              Style="{StaticResource LeftPanelTitle_Border}">
+         <TextBlock Text="Lista entità importate"
+                    FontWeight="DemiBold"
+                    FontSize="14"/>
+      </Border>
+      <ListBox Grid.Row="4" 
+               ItemsSource="{Binding ImportedEntityList, UpdateSourceTrigger=PropertyChanged}"
+               SelectedItem="{Binding SelImportedEntity}"
+               MinHeight="200">
+         <ListBox.ItemContainerStyle>
+            <Style TargetType="ListBoxItem">
+               <Setter Property="HorizontalContentAlignment" Value="Stretch"/>
+            </Style>
+         </ListBox.ItemContainerStyle>
+         <ListBox.ItemTemplate>
+            <DataTemplate>
+               <Grid HorizontalAlignment="Stretch">
+                  <Grid.InputBindings>
+                     <MouseBinding Gesture="LeftDoubleClick"
+                                   Command="{Binding ImportedEntity_DoubleClick}"/>
+                  </Grid.InputBindings>
+                  <TextBlock Text="{Binding ghName}">
+                  </TextBlock>
+               </Grid>
+            </DataTemplate>
+         </ListBox.ItemTemplate>
+      </ListBox>-->
+      <UniformGrid Grid.Row="5"
+                   Rows="1">
+         <Button Content="Ok"
+                 Command="{Binding Ok_Command}"
+                 Style="{StaticResource LeftPanel_TextButton}"/>
+         <!--<Button Content="Cancel"
+                 Command="{Binding Cancel_Command}"
+                 Style="{StaticResource LeftPanel_TextButton}"/>-->
+      </UniformGrid>
+   </Grid>
+</UserControl>

Icarus/ModifyPartPanel/ModifyPartPanelV.xaml.vb

@@ -0,0 +1,3 @@
+Public Class ModifyPartPanelV
+
+End Class

Icarus/ModifyPartPanel/ModifyPartPanelVM.vb

@@ -0,0 +1,407 @@
+Imports System.Collections.ObjectModel
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class ModifyPartPanelVM
+   Inherits VMBase
+
+   'Private m_nImportedPartId As Integer = GDB_ID.NULL
+   'Friend ReadOnly Property nImportedPartId As Integer
+   '   Get
+   '      Return m_nImportedPartId
+   '   End Get
+   'End Property
+
+   'Private m_ImportedEntityList As New ObservableCollection(Of GeomEntity)
+   'Public Property ImportedEntityList As ObservableCollection(Of GeomEntity)
+   '   Get
+   '      Return m_ImportedEntityList
+   '   End Get
+   '   Set(value As ObservableCollection(Of GeomEntity))
+   '      m_ImportedEntityList = value
+   '   End Set
+   'End Property
+
+   'Private m_SelImportedEntity As GeomEntity
+   'Public Property SelImportedEntity As GeomEntity
+   '   Get
+   '      Return m_SelImportedEntity
+   '   End Get
+   '   Set(value As GeomEntity)
+   '      m_SelImportedEntity = value
+   '      EgtDeselectAll()
+   '      If Not IsNothing(m_SelImportedEntity) Then
+   '         EgtSelectObj(m_SelImportedEntity.nId)
+   '      End If
+   '      EgtDraw()
+   '   End Set
+   'End Property
+   'Friend Sub SetSelImportedEntity(nId As Integer)
+   '   m_SelImportedEntity = Map.refImportPanelVM.ImportedEntityList.FirstOrDefault(Function(x) x.nId = nId)
+   '   EgtDeselectAll()
+   '   If Not IsNothing(m_SelImportedEntity) Then
+   '         EgtSelectObj(m_SelImportedEntity.nId)
+   '      End If
+   '      EgtDraw()
+   '   NotifyPropertyChanged(NameOf(SelImportedEntity))
+   'End Sub
+
+   Private m_ModifyPartList As New ObservableCollection(Of ModifyPart)
+   Public ReadOnly Property ModifyPartList As ObservableCollection(Of ModifyPart)
+      Get
+         Return m_ModifyPartList
+      End Get
+   End Property
+
+   Private m_SelModifyPart As ModifyPart
+   Friend Sub SetSelModifyPart(SelModifyPart As ModifyPart)
+      m_SelModifyPart = SelModifyPart
+      m_SelModifyLayer = Nothing
+   End Sub
+   Public ReadOnly Property SelModifyPart As ModifyPart
+      Get
+         Return m_SelModifyPart
+      End Get
+   End Property
+
+   Private m_SelModifyLayer As ModifyLayer
+   Public ReadOnly Property SelModifyLayer As ModifyLayer
+      Get
+         Return m_SelModifyLayer
+      End Get
+   End Property
+   Friend Sub SetSelModifyLayer(SelModifyLayer As ModifyLayer)
+      m_SelModifyPart = m_ModifyPartList.FirstOrDefault(Function(x) x.LayerList.Contains(SelModifyLayer))
+      m_SelModifyLayer = SelModifyLayer
+   End Sub
+
+   Private m_SelModifyEntity As ModifyEntity
+   Public ReadOnly Property SelModifyEntity As ModifyEntity
+      Get
+         Return m_SelModifyEntity
+      End Get
+   End Property
+   Friend Sub SetSelModifyEntity(SelModifyEntity As ModifyEntity)
+      For Each CurrPart In m_ModifyPartList
+         Dim CurrLayer As ModifyLayer = CurrPart.LayerList.FirstOrDefault(Function(x) x.EntityList.Contains(SelModifyEntity))
+         If Not IsNothing(CurrLayer) Then
+            m_SelModifyPart = CurrPart
+            m_SelModifyLayer = CurrLayer
+            Exit For
+         End If
+      Next
+      m_SelModifyEntity = SelModifyEntity
+   End Sub
+
+   ' Definizione comandi
+   Private m_cmdOk As ICommand
+   Private m_cmdCancel As ICommand
+
+   Sub New()
+      ' Creo riferimento a questa classe in EgtCAM5Map
+      Map.SetRefModifyPartPanelVM(Me)
+   End Sub
+
+#Region "METHODS"
+
+   Friend Sub Init()
+      m_ModifyPartList.Clear()
+      ' carico pezzi in lista
+      For Each PrintPart In Map.refTopPanelVM.PartList
+         m_ModifyPartList.Add(New ModifyPart(PrintPart))
+      Next
+   End Sub
+
+#End Region    ' METHODS
+
+#Region "COMMANDS"
+
+   '#Region "SetReference"
+
+   '   Public ReadOnly Property SetReference_Command As ICommand
+   '      Get
+   '         If m_cmdSetReference Is Nothing Then
+   '            m_cmdSetReference = New Command(AddressOf SetReference)
+   '         End If
+   '         Return m_cmdSetReference
+   '      End Get
+   '   End Property
+
+   '   Public Sub SetReference()
+   '      If Not IsNothing(SelGeomEntity) Then
+   '         Dim ChooseReferenceWndVM As New ChooseReferenceWndVM
+   '         Dim ChooseReferenceWndV As New ChooseReferenceWndV(Application.Current.MainWindow, ChooseReferenceWndVM)
+   '         If Not ChooseReferenceWndV.ShowDialog() Then Return
+   '         SelGeomEntity.Reference = ChooseReferenceWndVM.SelReference
+   '      End If
+   '   End Sub
+
+   '#End Region    ' SetReference
+
+   '#Region "AddPart"
+
+   '   Public ReadOnly Property AddPart_Command As ICommand
+   '      Get
+   '         If m_cmdAddPart Is Nothing Then
+   '            m_cmdAddPart = New Command(AddressOf AddPart)
+   '         End If
+   '         Return m_cmdAddPart
+   '      End Get
+   '   End Property
+
+   '   Public Sub AddPart()
+   '      m_ImportPartList.Add(New ImportPart)
+   '   End Sub
+
+   '#End Region    ' AddPart
+
+   '#Region "RemovePart"
+
+   '   Public ReadOnly Property RemovePart_Command As ICommand
+   '      Get
+   '         If m_cmdRemovePart Is Nothing Then
+   '            m_cmdRemovePart = New Command(AddressOf RemovePart)
+   '         End If
+   '         Return m_cmdRemovePart
+   '      End Get
+   '   End Property
+
+   '   Public Sub RemovePart()
+   '      If IsNothing(SelImportLayer) Then
+   '         ' rimuovo pezzo
+   '         m_ImportPartList.Remove(SelImportPart)
+   '      Else
+   '         ' rimuovo geometria
+   '         Dim CurrEntity As GeomEntity = m_SelGeomEntity
+   '         SelImportLayer.EntityList.Remove(m_SelGeomEntity)
+   '         ' la rimetto in lista importati
+   '         ImportedEntityList.Add(CurrEntity)
+   '      End If
+   '   End Sub
+
+   '#End Region    ' RemovePart
+
+#Region "Ok"
+
+   Public ReadOnly Property Ok_Command As ICommand
+      Get
+         If m_cmdOk Is Nothing Then
+            m_cmdOk = New Command(AddressOf Ok)
+         End If
+         Return m_cmdOk
+      End Get
+   End Property
+
+   Public Sub Ok()
+      'Dim sErr As New List(Of String)
+      '' verifico che tutti i pezzi abbiano una superficie da stampare nel layer apposito
+      'For Each CurrPart In m_ImportPartList
+      '   For Each CurrLayer In CurrPart.LayerList
+      '      Select Case CurrLayer.Type
+      '         Case ImportLayer.LayerType.PRINT_SOLID
+      '            If CurrLayer.EntityList.Count = 0 Then
+      '               If sErr.Count > 0 Then sErr(sErr.Count - 1) &= Environment.NewLine
+      '               sErr.Add(CurrPart.ghName & " - No print surface defined!")
+      '            End If
+      '      End Select
+      '   Next
+      'Next
+      'If sErr.Count > 0 Then
+      '   MessageBox.Show(String.Concat(sErr), "Error")
+      '   Return
+      'Else
+      '   ' Creo pezzi e layer necessari
+      '   For Each ImportPart In m_ImportPartList
+      '      Dim frImportedPart As New Frame3d
+      '      EgtGetGroupGlobFrame(m_nImportedPartId, frImportedPart)
+      '      Dim nPartId As Integer = EgtCreateGroup(GDB_ID.ROOT, frImportedPart)
+      '      EgtSetName(nPartId, PART)
+      '      Dim nFrameId As Integer = GDB_ID.NULL
+      '      Dim b3PrintSolid As New BBox3d
+      '      Dim nPrintPartLayerId As Integer = GDB_ID.NULL
+      '      Dim PrintSolidEntity As GeomEntity = Nothing
+      '      Dim nOriginalPartLayerId As Integer = GDB_ID.NULL
+      '      Dim nRibsLayerId As Integer = GDB_ID.NULL
+      '      Dim nShellNumberLayerId As Integer = GDB_ID.NULL
+      '      Dim nAuxSolidsLayerId As Integer = GDB_ID.NULL
+      '      Dim nMachStartLayerId As Integer = GDB_ID.NULL
+      '      Dim nOthersLayerId As Integer = GDB_ID.NULL
+      '      For Each ImportLayer In ImportPart.LayerList
+      '         Select Case ImportLayer.Type
+      '            Case ImportLayer.LayerType.PRINT_SOLID
+      '               nPrintPartLayerId = EgtCreateGroup(nPartId)
+      '               EgtSetName(nPrintPartLayerId, PRINT_SOLID)
+      '               If ImportLayer.EntityList.Count > 0 Then
+      '                  PrintSolidEntity = ImportLayer.EntityList(0)
+      '                  EgtRelocateGlob(PrintSolidEntity.nId, nPrintPartLayerId, GDB_POS.LAST_SON)
+      '                  ' calcolo box superficie per creazione riferimento
+      '                  EgtGetBBoxGlob(PrintSolidEntity.nId, GDB_BB.STANDARD, b3PrintSolid)
+      '               End If
+      '               'Case ImportLayer.LayerType.ORIGINAL_SOLID
+      '               '   nOriginalPartLayerId = EgtCreateGroup(nPartId)
+      '               '   EgtSetName(nOriginalPartLayerId, ORIGINAL_SOLID)
+      '               '   For Each GeomEntity In ImportLayer.EntityList
+      '               '      EgtRelocateGlob(GeomEntity.nId, nOriginalPartLayerId, GDB_POS.LAST_SON)
+      '               '   Next
+      '            Case ImportLayer.LayerType.MACH_START
+      '               nMachStartLayerId = EgtCreateGroup(nPartId)
+      '               EgtSetName(nMachStartLayerId, LAY_MACH_START)
+      '               Dim nMachStartId As Integer = GDB_ID.NULL
+      '               If ImportLayer.EntityList.Count > 0 Then
+      '                  For Each GeomEntity In ImportLayer.EntityList
+      '                     ' se punto o curva compo
+      '                     Dim EntityType As GDB_TY = EgtGetType(GeomEntity.nId)
+      '                     Select Case EntityType
+      '                        Case GDB_TY.GEO_POINT, GDB_TY.CRV_COMPO
+      '                           ' gli cambio layer
+      '                           EgtRelocateGlob(GeomEntity.nId, nMachStartLayerId, GDB_POS.LAST_SON)
+      '                           nMachStartId = GeomEntity.nId
+      '                        Case GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
+      '                           ' altrimenti la trasformo in curva compo
+      '                           nMachStartId = EgtCreateCurveCompo(nMachStartLayerId, GeomEntity.nId, True)
+      '                     End Select
+      '                     EgtSetName(nMachStartId, START_GEOM)
+      '                     ' coloro l'entita' di rosso
+      '                     Dim c3Red As Color3d
+      '                     c3Red.FromColor(System.Drawing.Color.Red)
+      '                     EgtSetColor(nMachStartId, c3Red)
+      '                  Next
+      '               Else
+      '                  ' creo punto di partenza
+      '                  Dim ptStart As Point3d = b3PrintSolid.Center() - 0.6 * b3PrintSolid.DimY() * Vector3d.Y_AX() - 0.5 * b3PrintSolid.DimZ() * Vector3d.Z_AX()
+      '                  nMachStartId = EgtCreateGeoPoint(nMachStartLayerId, ptStart, GDB_RT.GLOB)
+      '                  EgtSetName(nMachStartId, START_GEOM)
+      '                  ' coloro l'entita' di rosso
+      '                  Dim c3Red As Color3d
+      '                  c3Red.FromColor(System.Drawing.Color.Red)
+      '                  EgtSetColor(nMachStartId, c3Red)
+      '               End If
+      '            Case ImportLayer.LayerType.RIBS
+      '               nRibsLayerId = EgtCreateGroup(nPartId)
+      '               EgtSetName(nRibsLayerId, LAY_RIBS)
+      '               For Each GeomEntity In ImportLayer.EntityList
+      '                  EgtSetInfo(GeomEntity.nId, KEY_RIB_TYPE, RibEntity.RibTypes.FROMIMPORT)
+      '                  EgtRelocateGlob(GeomEntity.nId, nRibsLayerId, GDB_POS.LAST_SON)
+      '                  ' coloro l'entita' di viola
+      '                  Dim c3LightBlue As Color3d
+      '                  c3LightBlue.FromColor(System.Drawing.Color.MediumOrchid)
+      '                  EgtSetColor(GeomEntity.nId, c3LightBlue)
+      '               Next
+      '            Case ImportLayer.LayerType.SHELL_NUMBER
+      '               nShellNumberLayerId = EgtCreateGroup(nPartId)
+      '               EgtSetName(nShellNumberLayerId, LAY_SHELL_NBR)
+      '               For Each GeomEntity In ImportLayer.EntityList
+      '                  EgtSetInfo(GeomEntity.nId, KEY_SHELLNBR_TYPE, ShellNumberEntity.ShellNumberTypes.FROMIMPORT)
+      '                  EgtRelocateGlob(GeomEntity.nId, nShellNumberLayerId, GDB_POS.LAST_SON)
+      '                  ' coloro l'entita' di verde
+      '                  Dim c3LightBlue As Color3d
+      '                  c3LightBlue.FromColor(System.Drawing.Color.Lime)
+      '                  EgtSetColor(GeomEntity.nId, c3LightBlue)
+      '               Next
+      '            Case ImportLayer.LayerType.AUX_SOLIDS
+      '               nAuxSolidsLayerId = EgtCreateGroup(nPartId)
+      '               EgtSetName(nAuxSolidsLayerId, LAY_AUX_SOLIDS)
+      '               For Each GeomEntity In ImportLayer.EntityList
+      '                  EgtSetInfo(GeomEntity.nId, KEY_AUXSOLID_TYPE, RibEntity.RibTypes.FROMIMPORT)
+      '                  EgtRelocateGlob(GeomEntity.nId, nAuxSolidsLayerId, GDB_POS.LAST_SON)
+      '                  ' coloro l'entita' di oro
+      '                  Dim c3LightBlue As Color3d
+      '                  c3LightBlue.FromColor(System.Drawing.Color.DarkGoldenrod)
+      '                  EgtSetColor(GeomEntity.nId, c3LightBlue)
+      '               Next
+      '            Case ImportLayer.LayerType.OTHERS
+      '               nOthersLayerId = EgtCreateGroup(nPartId)
+      '               EgtSetName(nOthersLayerId, LAY_OTHERS)
+      '               For Each GeomEntity In ImportLayer.EntityList
+      '                  EgtRelocateGlob(GeomEntity.nId, nOthersLayerId, GDB_POS.LAST_SON)
+      '               Next
+      '         End Select
+      '      Next
+      '      ' aggiungo riferimento
+      '      Dim nReferenceLayerId As Integer = EgtCreateGroup(nPartId)
+      '      EgtSetName(nReferenceLayerId, LAY_REFERENCE)
+      '      ' Creo riferimento 
+      '      Dim ptOrig As New Point3d(b3PrintSolid.Min())
+      '      Select Case PrintSolidEntity.Reference
+      '         Case ChooseReferenceWndVM.References.TL
+      '            ptOrig += b3PrintSolid.DimY() * Vector3d.Y_AX
+      '         Case ChooseReferenceWndVM.References.TR
+      '            ptOrig += b3PrintSolid.DimY() * Vector3d.Y_AX + b3PrintSolid.DimX() * Vector3d.X_AX
+      '         Case ChooseReferenceWndVM.References.BL
+      '         Case ChooseReferenceWndVM.References.BR
+      '            ptOrig += b3PrintSolid.DimX() * Vector3d.X_AX
+      '         Case ChooseReferenceWndVM.References.TC
+      '            ptOrig += b3PrintSolid.DimY() * Vector3d.Y_AX + b3PrintSolid.DimX() / 2 * Vector3d.X_AX
+      '         Case ChooseReferenceWndVM.References.ML
+      '            ptOrig += b3PrintSolid.DimY() / 2 * Vector3d.Y_AX
+      '         Case ChooseReferenceWndVM.References.MR
+      '            ptOrig += b3PrintSolid.DimY() / 2 * Vector3d.Y_AX + b3PrintSolid.DimX() * Vector3d.X_AX
+      '         Case ChooseReferenceWndVM.References.TC
+      '            ptOrig += b3PrintSolid.DimY() * Vector3d.Y_AX + b3PrintSolid.DimX() / 2 * Vector3d.X_AX
+      '         Case ChooseReferenceWndVM.References.MR
+      '            ptOrig += b3PrintSolid.DimY() / 2 * Vector3d.Y_AX + b3PrintSolid.DimX() * Vector3d.X_AX
+      '         Case ChooseReferenceWndVM.References.BC
+      '            ptOrig += b3PrintSolid.DimX() / 2 * Vector3d.X_AX
+      '         Case ChooseReferenceWndVM.References.MC
+      '            ptOrig += b3PrintSolid.DimY() / 2 * Vector3d.Y_AX + b3PrintSolid.DimX() / 2 * Vector3d.X_AX
+      '      End Select
+      '      Dim frPrintSolid As New Frame3d(ptOrig)
+      '      nFrameId = EgtCreateGeoFrame(nReferenceLayerId, frPrintSolid, GDB_RT.GLOB)
+      '      If nFrameId Then
+      '         EgtSetName(nFrameId, FRAME_PART)
+      '         EgtSetMode(nFrameId, GDB_MD.LOCKED)
+      '      End If
+      '      EgtSetInfo(nReferenceLayerId, KEY_REFERENCE, PrintSolidEntity.Reference)
+      '      ' appoggio il pezzo sulla tavola
+      '      EgtMove( nPartId, New Vector3d(0, 0, -b3PrintSolid.Min.z))
+      '      ' lo aggiungo a lista pezzi 
+      '      Dim sFilePath As String = ""
+      '      EgtGetInfo(m_nImportedPartId, FILE_PATH, sFilePath)
+      '      EgtSetInfo(nPartId, FILE_PATH, sFilePath)
+      '      EgtSetInfo(nPartId, "PartOnTable", 1)
+      '      Dim NewPart As New Print3dPartVM(nPartId, nPrintPartLayerId, PrintSolidEntity.nId, nOriginalPartLayerId, nReferenceLayerId, nFrameId, nMachStartLayerId, nRibsLayerId, nShellNumberLayerId, nAuxSolidsLayerId, nOthersLayerId, sFilePath)
+      '      Map.refTopPanelVM.PartList.Add(NewPart)
+      '   Next
+      'End If
+      ''EgtAddMachGroup("3dPrint")
+      ''EgtSetTable("Tab")
+
+      ''Dim nRawId As Integer = EgtAddRawPart(b3PrintSolid.Min, b3PrintSolid.DimX, b3PrintSolid.DimY, b3PrintSolid.DimZ, New Color3d(128, 128, 128, 30))
+      ''EgtAddPartToRawPart(nPartId, b3PrintSolid.Min, nRawId)
+      ''EgtMoveToCornerRawPart(nRawId, New Point3d(dPosX, dPosY, 0), MCH_CR.BL)
+
+      ''EgtResetCurrMachGroup()
+
+      '' seleziono ultimo pezzo aggiunto
+      'Map.refTopPanelVM.SelLastPart()
+      '' elimino vecchio pezzo d'importazione
+      'EgtErase(m_nImportedPartId)
+
+      'EgtDraw()
+      ' ripristino modalita' standard
+      Map.refTopPanelVM.SelPage = Pages.MODIFY
+   End Sub
+
+#End Region    ' Ok
+
+#Region "Cancel"
+
+   Public ReadOnly Property Cancel_Command As ICommand
+      Get
+         If m_cmdCancel Is Nothing Then
+            m_cmdCancel = New Command(AddressOf Cancel)
+         End If
+         Return m_cmdCancel
+      End Get
+   End Property
+
+   Public Sub Cancel()
+      ' ripristino modalita' standard
+      Map.refTopPanelVM.SelPage = Pages.MODIFY
+   End Sub
+
+#End Region    ' Cancel
+
+#End Region    ' COMMANDS
+
+End Class

Icarus/ModifyPartPanel/ModifyPartUtility.vb

@@ -0,0 +1,435 @@
+Imports System.Collections.ObjectModel
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class ModifyEntity
+   Inherits VMBase
+
+   ' layer sotto cui e' questa entita'
+   Private m_OrigLayer As ModifyLayer
+   Friend ReadOnly Property OrigLayer As ModifyLayer
+      Get
+         Return m_OrigLayer
+      End Get
+   End Property
+
+   Private m_bIsSelected As Boolean
+   Public Property bIsSelected As Boolean
+      Get
+         Return m_bIsSelected
+      End Get
+      Set(value As Boolean)
+         m_bIsSelected = value
+         ' seleziono in scena
+         EgtDeselectAll()
+         If Not IsNothing(value) Then
+            EgtSelectObj(m_nId)
+         End If
+         EgtDraw()
+         ' segno come elemento selezionato in treeview
+         Map.refModifyPartPanelVM.SetSelModifyEntity(Me)
+      End Set
+   End Property
+
+   Private m_nId As Integer = GDB_ID.NULL
+   Public ReadOnly Property nId As Integer
+      Get
+         Return m_nId
+      End Get
+   End Property
+
+   Private m_sName As String
+   Public ReadOnly Property sName As String
+      Get
+         Return m_sName
+      End Get
+   End Property
+
+   Public ReadOnly Property ghName As String
+      Get
+         Return m_nId
+      End Get
+   End Property
+
+   Private m_MenuList As New List(Of MenuItemVm)
+   Public Property MenuList As List(Of MenuItemVm)
+      Get
+         Return m_MenuList
+      End Get
+      Set(value As List(Of MenuItemVm))
+         m_MenuList = value
+      End Set
+   End Property
+
+   Sub New(nId As Integer, sName As String, OrigLayer As ModifyLayer)
+      m_nId = nId
+      m_sName = sName
+      m_OrigLayer = OrigLayer
+      ' aggiungo voci layer a contextmenu
+      CreateContextMenu(OrigLayer)
+   End Sub
+
+   Friend Sub UpdateContextMenu(OrigLayer As ModifyLayer)
+      m_MenuList.Clear()
+      ' aggiungo voci layer a contextmenu
+      CreateContextMenu(OrigLayer)
+   End Sub
+
+   Friend Sub CreateContextMenu(OrigLayer As ModifyLayer)
+      For Each ProjectPart In Map.refTopPanelVM.PartList
+         ' verifico in quali layer puo' andare questo elemento
+         Dim EntityType As GDB_TY = EgtGetType(nId)
+         Select Case EntityType
+            Case GDB_TY.GEO_POINT, GDB_TY.CRV_COMPO, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
+               ' recupero i layer
+               If OrigLayer.Type <> ModifyLayer.LayerType.MACH_START Then m_MenuList.Add(New MenuItemVm(Me, OrigLayer, ModifyLayer.LayerType.MACH_START, ProjectPart))
+               If OrigLayer.Type <> ModifyLayer.LayerType.OTHERS Then m_MenuList.Add(New MenuItemVm(Me, OrigLayer, ModifyLayer.LayerType.OTHERS, ProjectPart))
+            Case GDB_TY.SRF_MESH
+               ' verifico se volume chiuso
+               If OrigLayer.Type <> ModifyLayer.LayerType.PRINT_SOLID Then m_MenuList.Add(New MenuItemVm(Me, OrigLayer, ModifyLayer.LayerType.PRINT_SOLID, ProjectPart))
+               If OrigLayer.Type <> ModifyLayer.LayerType.SHELL_NUMBER Then m_MenuList.Add(New MenuItemVm(Me, OrigLayer, ModifyLayer.LayerType.SHELL_NUMBER, ProjectPart))
+               If OrigLayer.Type <> ModifyLayer.LayerType.AUX_SOLIDS Then m_MenuList.Add(New MenuItemVm(Me, OrigLayer, ModifyLayer.LayerType.AUX_SOLIDS, ProjectPart))
+               If OrigLayer.Type <> ModifyLayer.LayerType.RIBS Then m_MenuList.Add(New MenuItemVm(Me, OrigLayer, ModifyLayer.LayerType.RIBS, ProjectPart))
+               If OrigLayer.Type <> ModifyLayer.LayerType.OTHERS Then m_MenuList.Add(New MenuItemVm(Me, OrigLayer, ModifyLayer.LayerType.OTHERS, ProjectPart))
+         End Select
+      Next
+   End Sub
+
+   Friend Sub UpdateOrigLayer(NewLayer As ModifyLayer)
+      m_OrigLayer = NewLayer
+   End Sub
+
+End Class
+
+Public Class ModifyPart
+   Inherits VMBase
+
+   Private m_bIsSelected As Boolean
+   Public Property bIsSelected As Boolean
+      Get
+         Return m_bIsSelected
+      End Get
+      Set(value As Boolean)
+         m_bIsSelected = value
+         Map.refModifyPartPanelVM.SetSelModifyPart(Me)
+      End Set
+   End Property
+
+   Private m_PrintPart As Print3dPartVM
+   Public ReadOnly Property PrintPart As Print3dPartVM
+      Get
+         Return m_PrintPart
+      End Get
+   End Property
+
+   Private m_sName As String
+   Public Property sName As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+      End Set
+   End Property
+
+   Public ReadOnly Property ghName As String
+      Get
+         Return m_PrintPart.sImportedFileName
+      End Get
+   End Property
+
+   Private m_LayerList As New ObservableCollection(Of ModifyLayer)
+   Public ReadOnly Property LayerList As ObservableCollection(Of ModifyLayer)
+      Get
+         Return m_LayerList
+      End Get
+   End Property
+
+   Sub New(PrintPart As Print3dPartVM)
+      m_PrintPart = PrintPart
+      m_LayerList.Add(New ModifyLayer(ModifyLayer.LayerType.PRINT_SOLID, "Print", PrintPart))
+      m_LayerList.Add(New ModifyLayer(ModifyLayer.LayerType.MACH_START, "Layer Start", PrintPart))
+      m_LayerList.Add(New ModifyLayer(ModifyLayer.LayerType.RIBS, "Ribs", PrintPart))
+      m_LayerList.Add(New ModifyLayer(ModifyLayer.LayerType.SHELL_NUMBER, "Reduce Shell Number", PrintPart))
+      m_LayerList.Add(New ModifyLayer(ModifyLayer.LayerType.AUX_SOLIDS, "Filled Solids", PrintPart))
+      m_LayerList.Add(New ModifyLayer(ModifyLayer.LayerType.OTHERS, "Others", PrintPart))
+   End Sub
+
+End Class
+
+Public Class ModifyLayer
+   Inherits VMBase
+
+   Public Enum LayerType As Integer
+      PRINT_SOLID = 1
+      MACH_START = 2
+      RIBS = 3
+      SHELL_NUMBER = 4
+      AUX_SOLIDS = 5
+      OTHERS = 6
+   End Enum
+
+   Private m_nLayerId As Integer
+
+   Private m_bIsSelected As Boolean
+   Public Property bIsSelected As Boolean
+      Get
+         Return m_bIsSelected
+      End Get
+      Set(value As Boolean)
+         m_bIsSelected = value
+         Map.refModifyPartPanelVM.SetSelModifyLayer(Me)
+      End Set
+   End Property
+
+   Private m_Type As LayerType
+   Public Property Type As LayerType
+      Get
+         Return m_Type
+      End Get
+      Set(value As LayerType)
+         m_Type = value
+      End Set
+   End Property
+
+   Private m_sName As String
+   Public Property sName As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+      End Set
+   End Property
+
+   Private m_EntityList As New ObservableCollection(Of ModifyEntity)
+   Public Property EntityList As ObservableCollection(Of ModifyEntity)
+      Get
+         Return m_EntityList
+      End Get
+      Set(value As ObservableCollection(Of ModifyEntity))
+         m_EntityList = value
+      End Set
+   End Property
+
+   Sub New(Type As LayerType, sName As String)
+      m_Type = Type
+      m_sName = sName
+   End Sub
+
+   Sub New(Type As LayerType, sName As String, PrintPart As Print3dPartVM)
+      m_Type = Type
+      m_sName = sName
+      Select Case Type
+         Case LayerType.PRINT_SOLID
+            m_nLayerId = PrintPart.nPrintSolidLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            Dim sEntitytName As String = ""
+            EgtGetName(nEntityId, sEntitytName)
+            m_EntityList.Add(New ModifyEntity(nEntityId, sEntitytName, Me))
+         Case LayerType.MACH_START
+            m_nLayerId = PrintPart.nMachStartLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            Dim sEntitytName As String = ""
+            EgtGetName(nEntityId, sEntitytName)
+            While nEntityId <> GDB_ID.NULL
+               m_EntityList.Add(New ModifyEntity(nEntityId, sEntitytName, Me))
+               nEntityId = EgtGetNext(nEntityId)
+               EgtGetName(nEntityId, sEntitytName)
+            End While
+         Case LayerType.RIBS
+            m_nLayerId = PrintPart.nRibsLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            Dim sEntitytName As String = ""
+            EgtGetName(nEntityId, sEntitytName)
+            While nEntityId <> GDB_ID.NULL
+               Dim RibType As Integer = RibEntity.RibTypes.FROMDRAW
+               EgtGetInfo(nEntityId, KEY_RIB_TYPE, RibType)
+               If RibType = RibEntity.RibTypes.FROMIMPORT Then
+                  m_EntityList.Add(New ModifyEntity(nEntityId, sEntitytName, Me))
+               End If
+               nEntityId = EgtGetNext(nEntityId)
+               EgtGetName(nEntityId, sEntitytName)
+            End While
+         Case LayerType.SHELL_NUMBER
+            m_nLayerId = PrintPart.nShellNumberLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            Dim sEntitytName As String = ""
+            EgtGetName(nEntityId, sEntitytName)
+            While nEntityId <> GDB_ID.NULL
+               Dim ShellType As Integer = ShellNumberEntity.ShellNumberTypes.FROMDRAW
+               EgtGetInfo(nEntityId, KEY_SHELLNBR_TYPE, ShellType)
+               If ShellType = ShellNumberEntity.ShellNumberTypes.FROMIMPORT Then
+                  m_EntityList.Add(New ModifyEntity(nEntityId, sEntitytName, Me))
+               End If
+               nEntityId = EgtGetNext(nEntityId)
+               EgtGetName(nEntityId, sEntitytName)
+            End While
+         Case LayerType.AUX_SOLIDS
+            m_nLayerId = PrintPart.nAuxSolidsLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            Dim sEntitytName As String = ""
+            EgtGetName(nEntityId, sEntitytName)
+            While nEntityId <> GDB_ID.NULL
+               'Dim ShellType As Integer = ShellNumberEntity.ShellNumberTypes.FROMDRAW
+               'EgtGetInfo(nEntityId, KEY_SHELLNBR_TYPE, ShellType)
+               'If ShellType = ShellNumberEntity.ShellNumberTypes.FROMIMPORT Then
+               m_EntityList.Add(New ModifyEntity(nEntityId, sEntitytName, Me))
+               'End If
+               nEntityId = EgtGetNext(nEntityId)
+               EgtGetName(nEntityId, sEntitytName)
+            End While
+         Case LayerType.OTHERS
+            m_nLayerId = PrintPart.nOthersLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            Dim sEntitytName As String = ""
+            EgtGetName(nEntityId, sEntitytName)
+            While nEntityId <> GDB_ID.NULL
+               m_EntityList.Add(New ModifyEntity(nEntityId, sEntitytName, Me))
+               nEntityId = EgtGetNext(nEntityId)
+               EgtGetName(nEntityId, sEntitytName)
+            End While
+      End Select
+   End Sub
+
+End Class
+
+Public Class MenuItemVm
+   Inherits VMBase
+
+   ' enita' di origine
+   Private m_OrigEntity As ModifyEntity
+   Private m_OrigLayer As ModifyLayer
+
+   ' pezzo in cui spostare
+   Private m_Part As Print3dPartVM
+
+   ' tipo del layer indicato
+   Private m_Type As ModifyLayer.LayerType
+   Public Property Type As ModifyLayer.LayerType
+      Get
+         Return m_Type
+      End Get
+      Set(value As ModifyLayer.LayerType)
+         m_Type = value
+      End Set
+   End Property
+
+   Public ReadOnly Property sMsg As String
+      Get
+         Dim sType As String = ""
+         Select Case m_Type
+            Case ModifyLayer.LayerType.PRINT_SOLID
+               sType = "Print"
+            Case ModifyLayer.LayerType.MACH_START
+               sType = "Layer Start"
+            Case ModifyLayer.LayerType.RIBS
+               sType = "Ribs"
+            Case ModifyLayer.LayerType.SHELL_NUMBER
+               sType = "Reduce shell number"
+            Case ModifyLayer.LayerType.AUX_SOLIDS
+               sType = "Filled Solids"
+            Case ModifyLayer.LayerType.OTHERS
+               sType = "Others"
+         End Select
+         Return "Move to " & sType
+      End Get
+   End Property
+
+   ' Definizione comando
+   Private m_cmdCommand As ICommand
+
+   Sub New(OrigEntity As ModifyEntity, OrigLayer As ModifyLayer, Type As ModifyLayer.LayerType, Part As Print3dPartVM)
+      m_OrigEntity = OrigEntity
+      m_OrigLayer = OrigLayer
+      m_Type = Type
+      m_Part = Part
+   End Sub
+
+#Region "Cancel"
+
+   Public ReadOnly Property MenuItem_Command As ICommand
+      Get
+         If m_cmdCommand Is Nothing Then
+            m_cmdCommand = New Command(AddressOf Command)
+         End If
+         Return m_cmdCommand
+      End Get
+   End Property
+
+   Public Sub Command()
+      ' recupero layer da pezzo
+      Dim nLayerId As Integer = GDB_ID.NULL
+      Select Case m_Type
+         Case ModifyLayer.LayerType.PRINT_SOLID
+            nLayerId = m_Part.nPrintSolidLayerId
+         Case ModifyLayer.LayerType.MACH_START
+            nLayerId = m_Part.nMachStartLayerId
+         Case ModifyLayer.LayerType.RIBS
+            nLayerId = m_Part.nRibsLayerId
+         Case ModifyLayer.LayerType.SHELL_NUMBER
+            nLayerId = m_Part.nShellNumberLayerId
+         Case ModifyLayer.LayerType.AUX_SOLIDS
+            nLayerId = m_Part.nAuxSolidsLayerId
+         Case ModifyLayer.LayerType.OTHERS
+            nLayerId = m_Part.nOthersLayerId
+      End Select
+      ' sposto entita'
+      If EgtRelocateGlob(m_OrigEntity.nId, nLayerId) Then
+         ' elimino info vecchio layer
+         Select Case m_OrigLayer.Type
+            Case ModifyLayer.LayerType.PRINT_SOLID
+               EgtResetMark(m_OrigEntity.nId)
+            Case ModifyLayer.LayerType.MACH_START
+            Case ModifyLayer.LayerType.RIBS
+               EgtRemoveInfo(m_OrigEntity.nId, KEY_RIB_TYPE)
+            Case ModifyLayer.LayerType.SHELL_NUMBER
+               EgtRemoveInfo(m_OrigEntity.nId, KEY_SHELLNBR_TYPE)
+            Case ModifyLayer.LayerType.AUX_SOLIDS
+               EgtRemoveInfo(m_OrigEntity.nId, KEY_AUXSOLID_TYPE)
+            Case ModifyLayer.LayerType.OTHERS
+         End Select
+         ' sposto in lista
+         m_OrigLayer.EntityList.Remove(m_OrigEntity)
+         Dim NewPart As ModifyPart = Map.refModifyPartPanelVM.ModifyPartList.FirstOrDefault(Function(x) x.PrintPart.nPartId = m_Part.nPartId)
+         If Not IsNothing(NewPart) Then
+            Dim NewLayer As ModifyLayer = NewPart.LayerList.FirstOrDefault(Function(x) x.Type = m_Type)
+            If Not IsNothing(NewLayer) Then
+               NewLayer.EntityList.Add(m_OrigEntity)
+               ' aggiorno riferimenti nell'entita'
+               m_OrigEntity.UpdateOrigLayer(NewLayer)
+            End If
+         End If
+         ' aggiungo info nuovo layer
+         Select Case m_Type
+            Case ModifyLayer.LayerType.PRINT_SOLID
+               EgtSetName(m_OrigEntity.nId, PRINT_SOLID)
+               EgtSetColor(m_OrigEntity.nId, c3Print)
+            Case ModifyLayer.LayerType.MACH_START
+               EgtSetName(m_OrigEntity.nId, LAY_MACH_START)
+               EgtSetColor(m_OrigEntity.nId, c3MachStart)
+            Case ModifyLayer.LayerType.RIBS
+               EgtSetName(m_OrigEntity.nId, LAY_RIBS)
+               EgtSetInfo(m_OrigEntity.nId, KEY_RIB_TYPE, RibEntity.RibTypes.FROMIMPORT)
+               EgtSetColor(m_OrigEntity.nId, c3Rib)
+            Case ModifyLayer.LayerType.SHELL_NUMBER
+               EgtSetName(m_OrigEntity.nId, LAY_SHELL_NBR)
+               EgtSetInfo(m_OrigEntity.nId, KEY_SHELLNBR_TYPE, ShellNumberEntity.ShellNumberTypes.FROMIMPORT)
+               EgtSetColor(m_OrigEntity.nId, c3ShellNumber)
+            Case ModifyLayer.LayerType.AUX_SOLIDS
+               EgtSetName(m_OrigEntity.nId, LAY_AUX_SOLIDS)
+               EgtSetInfo(m_OrigEntity.nId, KEY_AUXSOLID_TYPE, RibEntity.RibTypes.FROMIMPORT)
+               EgtSetColor(m_OrigEntity.nId, c3AuxSolids)
+            Case ModifyLayer.LayerType.OTHERS
+               EgtSetName(m_OrigEntity.nId, LAY_OTHERS)
+               EgtSetColor(m_OrigEntity.nId, c3Others)
+         End Select
+         EgtDraw()
+         ' aggiorno riferimenti nel context menu item
+         m_OrigEntity.UpdateContextMenu(m_OrigEntity.OrigLayer)
+      End If
+   End Sub
+
+#End Region ' Cancel
+
+End Class

Icarus/My Project/AssemblyInfo.vb

@@ -60,5 +60,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.4.10.1")>
-<Assembly: AssemblyFileVersion("2.4.10.1")>
+<Assembly: AssemblyVersion("2.4.11.1")>
+<Assembly: AssemblyFileVersion("2.4.11.1")>

Icarus/OptionsWindow/MachineBox.xaml

@@ -0,0 +1,36 @@
+<EgtWPFLib5:EgtCustomWindow x:Class="MachineBox"
+    xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+    xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+    xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+    Height="160" Width="380" WindowStyle="None" ResizeMode="NoResize" 
+    TitleBarHeight="30" IsResizable="False" IsMinimizable="False"
+    ShowInTaskbar="False" WindowStartupLocation="CenterOwner">
+
+   <Border BorderThickness="2" BorderBrush="LightBlue">
+      <Grid >
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.25*"/>
+            <ColumnDefinition Width="5*"/>
+            <ColumnDefinition Width="0.25*"/>
+         </Grid.ColumnDefinitions>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.25*"/>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="0.25*"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="0.25*"/>
+         </Grid.RowDefinitions>
+
+         <TextBlock Name="MessageLbl" Grid.Column="1" Grid.Row="1" HorizontalAlignment="Center"
+               VerticalAlignment="Center" />
+         <UniformGrid Grid.Column="1" Grid.Row="3" Columns="3">
+            <Button Name="ReplaceBtn" Height="26" Margin="0,0,5,0"/>
+            <Button Name="UpdateBtn" Height="26" Margin="5,0,5,0"/>
+            <Button Name="CancelBtn" IsDefault="True" Height="26" Margin="5,0,0,0"/>
+         </UniformGrid>
+
+      </Grid>
+
+   </Border>
+
+</EgtWPFLib5:EgtCustomWindow>

Icarus/OptionsWindow/MachineBox.xaml.vb

@@ -0,0 +1,45 @@
+Imports EgtUILib
+
+Public Class MachineBox
+
+   Public Shadows DialogResult As MessageBoxResult = MessageBoxResult.Cancel
+
+   Public Sub New( Owner As Window, sMachName As String)
+
+       InitializeComponent()
+
+       Me.Owner = Owner
+
+       Title = EgtMsg( 6534)                ' Avviso
+
+       MessageLbl.Text = String.Format( EgtMsg( 6528), sMachName)  ' La macchina "{0}" esiste già,<br/> cosa vuoi fare ?
+
+       ReplaceBtn.Content = EgtMsg( 6531)   ' Sostituisci
+
+       UpdateBtn.Content = EgtMsg( 6532)    ' Aggiorna
+
+       CancelBtn.Content = EgtMsg( 6533)    ' Annulla
+
+   End Sub
+
+   Private Sub ReplaceBtn_Click( sender As Object, e As RoutedEventArgs) Handles ReplaceBtn.Click
+      DialogResult = MessageBoxResult.Yes
+      Close()
+   End Sub
+
+   Private Sub UpdateBtn_Click( sender As Object, e As RoutedEventArgs) Handles UpdateBtn.Click
+      DialogResult = MessageBoxResult.No
+      Close()
+   End Sub
+
+   Private Sub CancelBtn_Click( sender As Object, e As RoutedEventArgs) Handles CancelBtn.Click
+      DialogResult = MessageBoxResult.Cancel
+      Close()
+   End Sub
+
+   Public Overloads Function ShowDialog() As MessageBoxResult
+      MyBase.ShowDialog()
+      Return DialogResult
+   End Function
+
+End Class

Icarus/OptionsWindow/OptionModule.vb

@@ -0,0 +1,113 @@
+Imports System.Collections.ObjectModel
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Friend Module OptionModule
+
+   ' Parametri che contengono lista delle lingue disponibili e lingua selezionata
+   Friend m_LanguageList As New ObservableCollection(Of Language)
+   Friend m_SelectedLanguage As Language
+   ' Colori di sfondo della vista e della griglia
+   Friend m_TopSceneBackground As Color3d
+   Friend m_BotSceneBackground As Color3d
+   Friend m_GridColor As Color3d
+   ' Flag per visualizzazione spessa delle linee
+   Friend m_bThickLine As Boolean
+   ' Flag per visualizzazione smussata delle superfici
+   Friend m_bSmoothTriMesh As Boolean
+
+   ' Colore di default in disegno
+   Friend m_DefMaterialColor As Color3d
+   ' Tolleranza geometrica
+   Friend m_dGeometryTolerance As Double
+
+   ' Parametri per import
+   Friend m_dDxfScaleFactor As Double
+   Friend m_dStlScaleFactor As Double
+   Friend m_dImgScaleFactor As Double
+
+   ' Parametri per export
+   Friend m_nExportDxfFlag As Integer
+   Friend m_nImgWidth As Integer
+   Friend m_nImgHeight As Integer
+
+   ' Font di testo
+   Friend m_sFontText As String
+
+   ' Parametri per le quotature
+   Friend m_dExtLineLen As Double
+   Friend m_dArrowLen As Double
+   Friend m_dTextDist As Double
+   Friend m_nLenIsMM As Integer
+   Friend m_nDecDigit As Integer
+   Friend m_sFont As String
+   Friend m_dTextHeight As Double
+
+   ' Variabili che indicano per ogni tipo di lavorazione quale geometria è selezionabile
+   'Friend m_SelGeomSawing As SceneSelModeOpt
+   'Friend m_SelGeomDrilling As SceneSelModeOpt
+   'Friend m_SelGeomMilling As SceneSelModeOpt
+   'Friend m_SelGeomPocketing As SceneSelModeOpt
+   'Friend m_SelGeomMortising As SceneSelModeOpt
+   'Friend m_SelGeomSawRoughing As SceneSelModeOpt
+   'Friend m_SelGeomSawFinishing As SceneSelModeOpt
+   'Friend m_SelGeomGenMachining As SceneSelModeOpt
+   'Friend m_SelGeomChiseling As SceneSelModeOpt
+   'Friend m_SelGeomSurfFinishing As SceneSelModeOpt
+   'Friend m_SelGeomWaterJetting As SceneSelModeOpt
+   ' Flag per aggiungere una nuova lavorazione alla fine della fase o subito dopo la lavorazione selezionata
+   Friend m_bNewMachiningIsLastOne As Boolean
+   ' Variabile che indica se usare lo script per calcolare automaticamente la disposizione quando si passa in lavorazione
+   Friend m_bUseDispositionScript As Boolean
+
+   ' inizializzazione lettura variabili ad inizio programma
+   Friend Sub InitOptionModule()
+      ' Leggo elenco lingue disponibili da file ini
+      Dim nIndex As Integer = 1
+      'Dim ReadLanguage As Language = GetPrivateProfileLanguage(S_LANGUAGES, K_LANGUAGE & nIndex)
+      'While Not IsNothing(ReadLanguage)
+      '   OptionModule.m_LanguageList.Add(ReadLanguage)
+      '   nIndex += 1
+      '   ReadLanguage = GetPrivateProfileLanguage(S_LANGUAGES, K_LANGUAGE & nIndex)
+      'End While
+      'If nIndex = 1 Then
+      '   EgtOutLog("Error missing languages section in Config.ini")
+      '   MessageBox.Show( "Error : missing languages informations", "EgtCAM5", MessageBoxButton.OK, MessageBoxImage.Error)
+      '   End
+      'End If
+      '' Inizializzo la lingua corrente
+      'OptionModule.m_SelectedLanguage = OptionModule.m_LanguageList(0)
+      'Dim sMsgName As String = String.Empty
+      'GetPrivateProfileString(S_GENERAL, K_MESSAGES, "", sMsgName)
+      'For Each Language In OptionModule.m_LanguageList
+      '   If Language.Name = sMsgName Then
+      '      OptionModule.m_SelectedLanguage = Language
+      '      Exit For
+      '   End If
+      'Next
+      ' Inizializzo variabili colori di sfondo scena, griglia
+      Dim BackTopColor As New Color3d(192, 192, 192)
+      GetMainPrivateProfileColor(S_SCENE, K_BACKTOP, BackTopColor)
+      m_TopSceneBackground = BackTopColor
+      Dim BackBotColor As New Color3d(BackTopColor)
+      GetMainPrivateProfileColor(S_SCENE, K_BACKBOTTOM, BackBotColor)
+      m_BotSceneBackground = BackBotColor
+      Dim GridColor As New Color3d(0, 0, 0)
+      GetMainPrivateProfileColor(S_GRID, K_MINLNCOLOR, GridColor)
+      m_GridColor = GridColor
+      ' Inizializzo flag linee ingrossate
+      m_bThickLine = GetMainPrivateProfileInt(S_SCENE, K_LINEWIDTH, 1) <> 1
+      ' Inizializzo flag visualizzazione smussata delle superfici
+      m_bSmoothTriMesh = GetMainPrivateProfileInt(S_SCENE, K_SHOWTRIAADV, 1) <> 0
+      ' Inizio colore di default in disegno
+      Dim DefColor As New Color3d(0, 0, 0)
+      GetMainPrivateProfileColor(S_GEOMDB, K_DEFAULTCOLOR, DefColor)
+      m_DefMaterialColor = DefColor
+      ' Inizializzo tolleranza geometrica
+      m_dGeometryTolerance = GetMainPrivateProfileDouble(S_GEOMDB, K_SURFTMTOLER, 0.05)
+      ' Inizializzo variabili per import
+      m_dDxfScaleFactor = GetMainPrivateProfileDouble(S_IMPORT, K_DXFSCALE, 1)
+      m_dStlScaleFactor = GetMainPrivateProfileDouble(S_IMPORT, K_STLSCALE, 1)
+   End Sub
+
+End Module

Icarus/OptionsWindow/OptionWindowV.xaml

@@ -0,0 +1,303 @@
+<EgtWPFLib5:EgtCustomWindow x:Class="OptionWindowV"
+                            xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+                            xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+                            xmlns:Icarus="clr-namespace:Icarus"
+                            xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+                            Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
+                            Title="{Binding Title}" Icon="/Resources/Icarus.ico"
+                            WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="False"
+                            IsMinimizable="False" WindowStartupLocation="CenterScreen" ShowInTaskbar="False"
+                            MinWidth="400" MinHeight="382"
+                            Width="400" Height="412">
+
+   <!--<EgtWPFLib5:EgtCustomWindow.Resources>
+      <local:GeomTypeConverter x:Key="GeomTypeConverter"/>
+   </EgtWPFLib5:EgtCustomWindow.Resources>-->
+
+   <TabControl Margin="5,5,5,5">
+      <TabItem Header="{Binding GenericMsg}">
+         <StackPanel Margin="5,5,5,0">
+            <!--<GroupBox Header="{Binding CurrentLanguageMsg}"
+                      Margin="0,0,0,5">
+               <UniformGrid Rows="2" Margin="3,3,3,3">
+                  <ComboBox ItemsSource="{Binding LanguageList, Mode=OneWay}" Height="25"
+                            DisplayMemberPath="Name" SelectedItem="{Binding SelectedLanguage}"
+                            Margin="0,0,0,5"/>
+                  <TextBlock Text="{Binding LanguageAdvertMsg}" TextWrapping="Wrap"
+                  TextAlignment="Center"/>
+               </UniformGrid>
+            </GroupBox>-->
+            <UniformGrid Columns="2"
+                         Margin="0,0,0,5">
+               <TextBlock Text="{Binding TopSceneBackgroundMsg}" VerticalAlignment="Center"/>
+               <Button Background="{Binding TopSceneBackground}"
+                       Command="{Binding TopSceneBackground_Command}"
+                       Style="{StaticResource EgtWPFLib5_InputButton}"/>
+            </UniformGrid>
+            <UniformGrid Columns="2"
+                         Margin="0,0,0,5">
+               <TextBlock Text="{Binding BotSceneBackgroundMsg}" VerticalAlignment="Center"/>
+               <Button Background="{Binding BotSceneBackground}"
+                       Command="{Binding BotSceneBackground_Command}"
+                       Style="{StaticResource EgtWPFLib5_InputButton}"/>
+            </UniformGrid>
+            <UniformGrid Columns="2"
+                         Margin="0,0,0,5">
+               <TextBlock Text="{Binding GridColorMsg}" VerticalAlignment="Center"/>
+               <Button Background="{Binding GridColor}"
+                       Command="{Binding GridColor_Command}"
+                       Style="{StaticResource EgtWPFLib5_InputButton}"/>
+            </UniformGrid>
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="1*"/>
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+               </Grid.RowDefinitions>
+               <TextBlock Text="{Binding ThickLineMsg}" VerticalAlignment="Center"
+                          Grid.Row="0" Margin="0,5,0,5"/>
+               <CheckBox IsChecked="{Binding ThickLine}"
+                          Grid.Column="1" Grid.Row="0" Margin="22,5,0,5" VerticalAlignment="Center"/>
+               <TextBlock Text="{Binding SmoothTriMeshMsg}" VerticalAlignment="Center"
+                          Grid.Row="1" Margin="0,5,0,5"/>
+               <CheckBox IsChecked="{Binding SmoothTriMesh}"
+                          Grid.Column="1" Grid.Row="1" Margin="22,5,0,5" VerticalAlignment="Center"/>
+            </Grid>
+            <!--<UniformGrid Columns="2"
+                     Margin="0,0,0,5">
+                <TextBlock Text="{Binding FontMsg}" VerticalAlignment="Center"/>
+                <ComboBox ItemsSource="{Binding FontList, Mode=OneWay}"
+                            SelectedItem="{Binding SelectedTextFont}" Height="25"
+                            Margin="10,5,0,0"/>
+            </UniformGrid>-->
+            <Grid Margin="5,5,5,5">
+               <Button Content="{Binding UpdateLicenceMsg}" Command="{Binding UpdateLicence_Command}"  Height="26" Margin="100,1"/>
+            </Grid>
+         </StackPanel>
+      </TabItem>
+      <TabItem Header="{Binding CADMsg}">
+         <StackPanel Margin="5,5,5,0">
+            <!--<UniformGrid Columns="2"
+                         Margin="0,0,0,5">
+               <TextBlock Text="{Binding DefMaterialColorMsg}" VerticalAlignment="Center"/>
+               <Button Background="{Binding DefMaterialColor}"
+                       Command="{Binding DefMaterialColor_Command}"
+                       Style="{StaticResource EgtWPFLib5_InputButton}"/>
+            </UniformGrid>-->
+            <UniformGrid Grid.ColumnSpan="2" Columns="2"
+                         Margin="0,0,0,5">
+               <TextBlock Text="{Binding GeometryToleranceMsg}" VerticalAlignment="Center"/>
+               <TextBox Text="{Binding GeometryTolerance}" Height="25"
+                        VerticalContentAlignment="Center"
+                        Margin="10,0,0,0"/>
+            </UniformGrid>
+            <!--<GroupBox Grid.Column="1" Grid.RowSpan="2"
+                      Header="{Binding DimensionMsg}"
+                      Margin="0,0,0,5">
+               <UniformGrid Grid.ColumnSpan="2" Columns="2">
+                  <TextBlock Text="{Binding ExtLineLenMsg}" VerticalAlignment="Center"/>
+                  <TextBox Text="{Binding ExtLineLen}" Height="25"
+                                 VerticalContentAlignment="Center"
+                                 Margin="10,5,0,0"/>
+                  <TextBlock Text="{Binding ArrowLenMsg}" VerticalAlignment="Center"/>
+                  <TextBox Text="{Binding ArrowLen}" Height="25"
+                                 VerticalContentAlignment="Center"
+                                 Margin="10,5,0,0"/>
+                  <TextBlock Text="{Binding TextDistMsg}" VerticalAlignment="Center"/>
+                  <TextBox Text="{Binding TextDist}" Height="25"
+                                 VerticalContentAlignment="Center"
+                                 Margin="10,5,0,0"/>
+                  <TextBlock Text="{Binding LenIsMMMsg}" VerticalAlignment="Center"/>
+                  <ComboBox ItemsSource="{Binding UnitMeasureList, Mode=OneWay}"
+                                 SelectedItem="{Binding SelectedUnitMeasure}" Height="25"
+                                 Margin="10,5,0,0"/>
+                  <TextBlock Text="{Binding DecDigitMsg}" VerticalAlignment="Center"/>
+                  <TextBox Text="{Binding DecDigit}" Height="25"
+                                 VerticalContentAlignment="Center"
+                                 Margin="10,5,0,0"/>
+                  <TextBlock Text="{Binding FontMsg}" VerticalAlignment="Center"/>
+                  <ComboBox ItemsSource="{Binding FontList, Mode=OneWay}"
+                                 SelectedItem="{Binding SelectedFont}" Height="25"
+                                 Margin="10,5,0,0"/>
+                  <TextBlock Text="{Binding TextHeightMsg}" VerticalAlignment="Center"/>
+                  <TextBox Text="{Binding TextHeight}" Height="25"
+                                 VerticalContentAlignment="Center"
+                                 Margin="10,5,0,0"/>
+               </UniformGrid>
+            </GroupBox>-->
+         </StackPanel>
+
+      </TabItem>
+      <TabItem Header="{Binding ImportMsg}">
+         <StackPanel Margin="5,5,5,0">
+            <Grid Margin="0,5,0,0">
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="0.8*"/>
+                  <ColumnDefinition Width="1*"/>
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+               </Grid.RowDefinitions>
+               <TextBlock Grid.Row="0" Grid.Column="1" 
+                             VerticalAlignment="Center" HorizontalAlignment="Center"  
+                             Text="{Binding UnitScaleMsg}" />
+               <TextBlock Grid.Row="0" Grid.Column="2" 
+                             VerticalAlignment="Center" HorizontalAlignment="Center"  
+                             Text="{Binding FactorScaleMsg}"/>
+
+               <TextBlock Grid.Row="1" Grid.Column="0" 
+                             Text="{Binding DxfScaleFactorMsg}" VerticalAlignment="Center"/>
+               <ComboBox  Grid.Row="1" Grid.Column="1"
+                         ItemsSource="{Binding ScaleDXFList, Mode=OneWay}"
+                         SelectedItem="{Binding SelectedDXFScale, UpdateSourceTrigger=PropertyChanged}" Height="25"
+                         Margin="10,0,0,5"/>
+               <TextBox  Grid.Row="1" Grid.Column="2"
+                        Text="{Binding DxfScaleFactor}" Height="25"
+                        IsEnabled="{Binding DXFScaleEnable, UpdateSourceTrigger=LostFocus}"
+                        VerticalContentAlignment="Center"
+                        Margin="10,0,0,5"/>
+               <TextBlock Grid.Row="2" Grid.Column="0"
+                        Text="{Binding StlScaleFactorMsg}" VerticalAlignment="Center"/>
+               <ComboBox Grid.Row="2" Grid.Column="1"
+                        ItemsSource="{Binding ScaleSTLList, Mode=OneWay}"
+                         SelectedItem="{Binding SelectedSTLScale, UpdateSourceTrigger=PropertyChanged}" Height="25"
+                         Margin="10,0,0,5"/>
+               <TextBox Grid.Row="2" Grid.Column="2"
+                        Text="{Binding StlScaleFactor}" Height="25"
+                        IsEnabled="{Binding STLScaleEnable, UpdateSourceTrigger=LostFocus}"
+                        VerticalContentAlignment="Center"
+                        Margin="10,0,0,5"/>
+               <!--<TextBlock Grid.Row="3" Grid.Column="0"
+                        Text="{Binding ImageScaleFactorMsg}" VerticalAlignment="Center"/>
+               <ComboBox Grid.Row="3" Grid.Column="1"
+                        ItemsSource="{Binding ScaleImageList, Mode=OneWay}"
+                         SelectedItem="{Binding SelectedImageScale, UpdateSourceTrigger=PropertyChanged}" Height="25"
+                         Margin="10,0,0,5"/>
+               <TextBox Grid.Row="3" Grid.Column="2"
+                        Text="{Binding ImageScaleFactor}" Height="25"
+                        IsEnabled="{Binding ImageScaleEnable, UpdateSourceTrigger=LostFocus}"
+                         VerticalContentAlignment="Center"
+                         Margin="10,0,0,5"/>-->
+            </Grid>
+         </StackPanel>
+      </TabItem>
+      <!--<TabItem Header="{Binding ExportMsg}">
+         <StackPanel>
+            <GroupBox Grid.Column="1" Grid.RowSpan="2"
+                      Header="{Binding ImageMsg}"
+                      Margin="5,5,5,0">
+               <UniformGrid Grid.ColumnSpan="2" Columns="2">
+                  <TextBlock Text="{Binding ImageWidthMsg}" VerticalAlignment="Center"/>
+                  <TextBox Text="{Binding ImageWidth}" Height="25"
+                        VerticalContentAlignment="Center"
+                        Margin="10,0,0,5"/>
+                  <TextBlock Text="{Binding ImageHeightMsg}" VerticalAlignment="Center"/>
+                  <TextBox Text="{Binding ImageHeight}" Height="25"
+                        VerticalContentAlignment="Center"
+                        Margin="10,0,0,5"/>
+               </UniformGrid>
+            </GroupBox>
+         </StackPanel>
+      </TabItem>-->
+      <TabItem Header="{Binding CAMMsg}">
+         <StackPanel>
+            <!--<GroupBox Grid.Column="1" Grid.RowSpan="2"
+                      Header="{Binding MachiningSelGeomMsg}"
+                      Margin="5,5,5,0">
+               <UniformGrid Columns="2">
+                  <TextBlock Text="{Binding GeomTypeDrillingMsg}" VerticalAlignment="Center"/>
+                  <ComboBox ItemsSource="{Binding GeomTypeList, Mode=OneWay}"
+                            SelectedItem="{Binding SelectedDrillingGeomType}" Height="25">
+                     <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                           <TextBlock Text="{Binding Converter={StaticResource GeomTypeConverter}}"/>
+                        </DataTemplate>
+                     </ComboBox.ItemTemplate>
+                  </ComboBox>
+                  <TextBlock Text="{Binding GeomTypeSawingMsg}" VerticalAlignment="Center"/>
+                  <ComboBox ItemsSource="{Binding GeomTypeList, Mode=OneWay}"
+                            SelectedItem="{Binding SelectedSawingGeomType}" Height="25">
+                     <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                           <TextBlock Text="{Binding Converter={StaticResource GeomTypeConverter}}"/>
+                        </DataTemplate>
+                     </ComboBox.ItemTemplate>
+                  </ComboBox>
+                  <TextBlock Text="{Binding GeomTypeMillingMsg}" VerticalAlignment="Center"/>
+                  <ComboBox ItemsSource="{Binding GeomTypeList, Mode=OneWay}"
+                            SelectedItem="{Binding SelectedMillingGeomType}" Height="25"
+                            Margin="0,0,0,5">
+                     <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                           <TextBlock Text="{Binding Converter={StaticResource GeomTypeConverter}}"/>
+                        </DataTemplate>
+                     </ComboBox.ItemTemplate>
+                  </ComboBox>
+                  <TextBlock Text="{Binding GeomTypePocketingMsg}" VerticalAlignment="Center"/>
+                  <ComboBox ItemsSource="{Binding GeomTypeList, Mode=OneWay}"
+                            SelectedItem="{Binding SelectedPocketingGeomType}" Height="25">
+                     <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                           <TextBlock Text="{Binding Converter={StaticResource GeomTypeConverter}}"/>
+                        </DataTemplate>
+                     </ComboBox.ItemTemplate>
+                  </ComboBox>
+                  <TextBlock Text="{Binding GeomTypeMortisingMsg}" VerticalAlignment="Center"/>
+                  <ComboBox ItemsSource="{Binding GeomTypeList, Mode=OneWay}"
+                            SelectedItem="{Binding SelectedMortisingGeomType}" Height="25">
+                     <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                           <TextBlock Text="{Binding Converter={StaticResource GeomTypeConverter}}"/>
+                        </DataTemplate>
+                     </ComboBox.ItemTemplate>
+                  </ComboBox>
+                  <TextBlock Text="{Binding GeomTypeChiselingMsg}" VerticalAlignment="Center"/>
+                  <ComboBox ItemsSource="{Binding GeomTypeList, Mode=OneWay}"
+                            SelectedItem="{Binding SelectedChiselingGeomType}" Height="25">
+                     <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                           <TextBlock Text="{Binding Converter={StaticResource GeomTypeConverter}}"/>
+                        </DataTemplate>
+                     </ComboBox.ItemTemplate>
+                  </ComboBox>
+               </UniformGrid>
+            </GroupBox>-->
+
+            <!--<Grid Margin="5,5,5,0">
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="2*"/>
+                  <ColumnDefinition Width="1*"/>
+               </Grid.ColumnDefinitions>
+               <Grid.RowDefinitions>
+                  <RowDefinition Height="1*"/>
+                  <RowDefinition Height="1*"/>
+               </Grid.RowDefinitions>
+               <TextBlock Text="{Binding NewMachiningPosMsg}" VerticalAlignment="Center"
+                          Grid.Row="0" Margin="0,0,0,5"/>
+               <CheckBox IsChecked="{Binding NewMachiningIsLastOne}"
+                         Grid.Column="1" Grid.Row="0" Margin="4,0,0,0" VerticalAlignment="Center"/>
+               <TextBlock Text="{Binding UseDispositionScriptMsg}" VerticalAlignment="Center"
+                          Grid.Row="1" Margin="0,0,0,5"/>
+               <CheckBox IsChecked="{Binding UseDispositionScript}"
+                         Grid.Column="1" Grid.Row="1" Margin="4,0,0,0" VerticalAlignment="Center"/>
+            </Grid>-->
+
+            <Grid Margin="5,5,5,0">
+               <Button Content="{Binding AddMachineMsg}" Command="{Binding AddMachine_Command}"  Height="26" Margin="100,1"/>
+            </Grid>
+
+            <Grid Margin="5,5,5,0">
+               <Button Content="{Binding ExportMachineMsg}" Command="{Binding ExportMachine_Command}"  Height="26" Margin="100,1"/>
+            </Grid>
+         </StackPanel>
+      </TabItem>
+   </TabControl>
+
+</EgtWPFLib5:EgtCustomWindow>

Icarus/OptionsWindow/OptionWindowV.xaml.vb

@@ -0,0 +1,3 @@
+Public Class OptionWindowV
+
+End Class

Icarus/ProjManager/ProjManagerVM.vb

@@ -162,6 +162,9 @@ Public Class ProjManagerVM
    End Sub
 
    Friend Sub NewProject(bDialog As Boolean)
+      ' Gestisco eventuale file corrente modificato
+      If Not Map.refSceneHostVM.MainController.ManageModified() Then Return
+      EgtResetModified()
       Dim NewProjMachine As Machine
       If bDialog AndAlso Map.refMachinePanelVM.MachineList.Count > 0 Then
          Dim ChooseMachineWndVM As New ChooseMachineWndVM
@@ -202,7 +205,7 @@ Public Class ProjManagerVM
       OpenProject(Nothing)
    End Sub
 
-   Friend Sub OpenProject(sFilePath As String)
+   Friend Function OpenProject(sFilePath As String) As Boolean
       If String.IsNullOrEmpty(sFilePath) Then
          ' Recupero cartella dell'ultimo progetto aperto
          Dim sDir As String = Map.refSceneHostVM.MainController.GetCurrFile()
@@ -212,11 +215,11 @@ Public Class ProjManagerVM
          If Not String.IsNullOrWhiteSpace(sDir) Then
             sDir = Path.GetDirectoryName(sDir)
          End If
-         Map.refSceneHostVM.MainController.OpenProject(sDir)
+         Return Map.refSceneHostVM.MainController.OpenProject(sDir)
       Else
-         Map.refSceneHostVM.MainController.OpenProject(sFilePath, False)
+         Return Map.refSceneHostVM.MainController.OpenProject(sFilePath, False)
       End If
-   End Sub
+   End Function
 
 #End Region ' OpenCommand
 
@@ -334,10 +337,10 @@ Public Class ProjManagerVM
    ''' Execute the Export.  This method is invoked by the ExportCommand.
    ''' </summary>
    Public Sub Options(ByVal param As Object)
-      'Dim OptionsWindow As New OptionWindowV
-      'OptionsWindow.DataContext = New OptionWindowVM
-      'OptionsWindow.Owner = Application.Current.MainWindow
-      'OptionsWindow.ShowDialog()
+      Dim OptionsWindow As New OptionWindowV
+      OptionsWindow.DataContext = New OptionWindowVM
+      OptionsWindow.Owner = Application.Current.MainWindow
+      OptionsWindow.ShowDialog()
    End Sub
 
 #End Region ' Options

Icarus/RibPanel/RibPanelV.xaml

@@ -1,22 +1,71 @@
-<StackPanel x:Class="RibPanelV"
+<Grid x:Class="RibPanelV"
             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
             xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
             xmlns:PrintApp="clr-namespace:Icarus"
             Margin="5">
-   <StackPanel.Resources>
+   <Grid.Resources>
       <PrintApp:CenterToolTipConverter x:Key="CenterToolTipConverter"/>
-   </StackPanel.Resources>
-   <ComboBox ItemsSource="{Binding RibList}"
+      <PrintApp:FromBooleanToVisibility x:Key="FromBooleanToVisibility"/>
+   </Grid.Resources>
+   <Grid.ColumnDefinitions>
+      <ColumnDefinition Width="Auto"/>
+      <ColumnDefinition Width="Auto"/>
+   </Grid.ColumnDefinitions>
+   <Grid.RowDefinitions>
+      <RowDefinition Height="1*"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="1*"/>
+   </Grid.RowDefinitions>
+   <ComboBox Grid.Row="3"
+             ItemsSource="{Binding RibList}"
              SelectedItem="{Binding SelRib}"
              IsEnabled="{Binding RibList_IsEnabled}"
-             DisplayMemberPath="ghName"/>
+             DisplayMemberPath="ghName"
+             Style="{StaticResource FeatureComboBox}"/>
     <!--Add Button--> 
    <ToggleButton x:Name="AddBtn" 
+                 Grid.Row="4"
                  Content="Add"
                  IsChecked="{Binding bAdd_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=AddBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="3"
+           Grid.RowSpan="3"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=AddBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+         </Grid.ColumnDefinitions>
+         <Button Grid.Column="0"
+                    Command="{Binding Import_Command}"
+                    ToolTip="{Binding Import_ToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/ProjectManager/Import.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="1"
+                    Command="{Binding Line2P_Command}"
+                    ToolTip="{Binding Line2P_ToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/Line2P.png" Stretch="Uniform"/>
+         </Button>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=AddBtn}"
           PlacementTarget="{Binding ElementName=AddBtn}"
           Style="{StaticResource LeftPanel_Popup}">
       <Border Style="{StaticResource LeftPanelPopup_Border}">
@@ -39,13 +88,68 @@
             </Button>
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
     <!--Edit Button--> 
    <ToggleButton x:Name="EditBtn"
+                 Grid.Row="5"
                  Content="Edit"
                  IsChecked="{Binding bEdit_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=EditBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="4"
+           Grid.RowSpan="3"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=EditBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+         </Grid.ColumnDefinitions>
+         <Button Grid.Column="0"
+                    Command="{Binding Delete_Command}"
+                    ToolTip="{Binding Delete_ToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/Delete.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="1"
+                    Command="{Binding ModifyCurve_Command}"
+                    ToolTip="{Binding ModifyCurve_ToolTip}"
+                    Visibility="{Binding Compo_Visibility}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/ModifyCurve.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="2"
+                    Command="{Binding AddPointCurve_Command}"
+                    ToolTip="{Binding AddPointCurve_ToolTip}"
+                    Visibility="{Binding Compo_Visibility}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/AddPointCurve.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="3"
+                    Command="{Binding RemovePointCurve_Command}"
+                    ToolTip="{Binding RemovePointCurve_ToolTip}"
+                    Visibility="{Binding Compo_Visibility}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/RemovePointCurve.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="4"
+                    Command="{Binding Extrude_Command}"
+                    ToolTip="{Binding Extrude_ToolTip}"
+                    Visibility="{Binding Compo_Visibility}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/Extrude.png" Stretch="Uniform"/>
+         </Button>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=EditBtn}"
           PlacementTarget="{Binding ElementName=EditBtn}"
           Style="{StaticResource LeftPanel_Popup}">
       <Border Style="{StaticResource LeftPanelPopup_Border}">
@@ -96,13 +200,90 @@
             </Button>
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
     <!--Grid Button--> 
    <ToggleButton x:Name="GridBtn"
+                 Grid.Row="6"
                  Content="Grid"
                  IsChecked="{Binding bGrid_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=GridBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="5"
+           Grid.RowSpan="3"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=GridBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+         </Grid.ColumnDefinitions>
+         <Button Command="{Binding CPlaneTop_Command}" 
+                    ToolTip="{Binding CPlaneTopToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneTOP.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="1"
+                    Command="{Binding CPlaneFront_Command}" 
+                    ToolTip="{Binding CPlaneFrontToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneFRONT.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="2" 
+                    Command="{Binding CPlaneRight_Command}" 
+                    ToolTip="{Binding CPlaneRightToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneRIGHT.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="3"
+                    Command="{Binding CPlaneBack_Command}" 
+                    ToolTip="{Binding CPlaneBackToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneBACK.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="4"
+                    Command="{Binding CPlaneLeft_Command}"
+                    ToolTip="{Binding CPlaneLeftToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneLEFT.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="5"
+                    Command="{Binding CPlaneBottom_Command}"
+                    ToolTip="{Binding CPlaneBottomToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneBOTTOM.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="6" 
+                    Command="{Binding CPlaneElevation_Command}" 
+                    ToolTip="{Binding CPlaneElevationToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneELEVATION.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="7" 
+                    Command="{Binding CPlaneOrigin_Command}" 
+                    ToolTip="{Binding CPlaneOriginToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneORIGIN.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="8"
+                    Command="{Binding CPlaneObj_Command}"
+                    ToolTip="{Binding CPlaneObjToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+               <Image Source="/Resources/GridViewPanel/CplaneOBJECT.png" Stretch="Uniform"/>
+            </Button>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=GridBtn}"
           PlacementTarget="{Binding ElementName=GridBtn}"
           Style="{StaticResource LeftPanel_Popup}">
       <Border Style="{StaticResource LeftPanelPopup_Border}">
@@ -179,21 +360,82 @@
                     Style="{StaticResource ToolBar_Button}">
                <Image Source="/Resources/GridViewPanel/CPlanePERPCURVE.png" Stretch="Uniform"/>
             </Button>
-            <!--<Button Grid.Column="10"
+            --><!--<Button Grid.Column="10"
                     Command="{Binding CPlaneObj_Command}"
                     ToolTip="{Binding CPlaneObjToolTip}" 
                     Style="{StaticResource ToolBar_Button}">
                <Image Source="/Resources/GridViewPanel/CplaneOBJECT.png" Stretch="Uniform"/>
-            </Button>-->
+            </Button>--><!--
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
     <!--Move Button--> 
-   <ToggleButton x:Name="MoveBtn" 
+   <ToggleButton x:Name="MoveBtn"
+                 Grid.Row="7"
                  Content="Move"
                  IsChecked="{Binding bMove_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=MoveBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="5"
+           Grid.RowSpan="5"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=MoveBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+         </Grid.RowDefinitions>
+         <Grid Margin="0,0,0,2.5">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="X"
+                          VerticalAlignment="Center"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding sXPos, UpdateSourceTrigger=Explicit}"
+                                      Grid.Column="1" 
+                                      Margin="5,0,0,0"
+                                      Style="{StaticResource LeftPanel_TextBox}"/>
+         </Grid>
+         <Grid Grid.Row="1"
+                  Margin="0,2.5,0,2.5">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="Y"
+                          VerticalAlignment="Center"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding sYPos, UpdateSourceTrigger=Explicit}"
+                                      Grid.Column="1" 
+                                      Margin="5,0,0,0"
+                                      Style="{StaticResource LeftPanel_TextBox}"/>
+         </Grid>
+         <Grid Grid.Row="2"
+                  Margin="0,2.5,0,0">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="Z"
+                          VerticalAlignment="Center"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding sZPos, UpdateSourceTrigger=Explicit}"
+                                      Grid.Column="1" 
+                                      Margin="5,0,0,0"
+                                      Style="{StaticResource LeftPanel_TextBox}"/>
+         </Grid>
+         <Grid Grid.Row="3"
+                  Margin="0,2.5,0,0">
+            <Button Content="Drag"
+                       Command="{Binding DragMove_Command}"
+                       Style="{StaticResource LeftPanel_TextButton}"/>
+         </Grid>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=MoveBtn}"
           PlacementTarget="{Binding ElementName=MoveBtn}"
           Style="{StaticResource LeftPanel_Popup}">
       <Border Style="{StaticResource LeftPanelPopup_Border}">
@@ -250,12 +492,52 @@
             </Grid>
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
    <ToggleButton x:Name="RotateBtn"
+                 Grid.Row="8"
                  Content="Rotate"
                  IsChecked="{Binding bRotate_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=RotateBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="6"
+           Grid.RowSpan="5"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=RotateBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+         </Grid.RowDefinitions>
+         <UniformGrid Columns="3">
+            <RadioButton Content="X"
+                            GroupName="Axes"
+                            IsChecked="{Binding RotAxes[0]}"
+                            Style="{StaticResource ToolBar_ToggleButton}"/>
+            <RadioButton Content="Y"
+                            GroupName="Axes"
+                            IsChecked="{Binding RotAxes[1]}"
+                            Style="{StaticResource ToolBar_ToggleButton}"/>
+            <RadioButton Content="Z"
+                            GroupName="Axes"
+                            IsChecked="{Binding RotAxes[2]}"
+                            Style="{StaticResource ToolBar_ToggleButton}"/>
+         </UniformGrid>
+         <EgtWPFLib5:EgtTextBox Grid.Row="1"
+                                   Text="{Binding sRotAngle, UpdateSourceTrigger=Explicit}"
+                                   Margin="0,5,0,0"/>
+         <Grid Grid.Row="2"
+                  Margin="0,2.5,0,0">
+            <Button Content="Drag"
+                       Command="{Binding DragRotate_Command}"
+                       Style="{StaticResource LeftPanel_TextButton}"/>
+         </Grid>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=RotateBtn}"
           Grid.Column="1"
           PlacementTarget="{Binding ElementName=RotateBtn}"
           Style="{StaticResource LeftPanel_Popup}">
@@ -292,9 +574,10 @@
             </Grid>
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
    <ToggleButton Content="Parameters"
+                 Grid.Row="9"
                  IsChecked="{Binding bMachParam_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
 
-</StackPanel>
+</Grid>

Icarus/RibPanel/RibPanelVM.vb

@@ -612,7 +612,18 @@ Public Class RibPanelVM
 
    Friend Sub OnKeyDown(Key As Forms.Keys)
       If Key = Forms.Keys.Escape Then
-
+         ' se attiva, disattivo griglia su oggetto
+         If m_bCPlaneObj_IsActive Then
+            m_bCPlaneObj_IsActive = False
+            ResetCPlaneObjIsActive()
+            ' ripristino selezioni precedenti
+            For Each Id In Map.refShellNumberPanelVM.PrevSelObjs
+               EgtSelectObj(Id)
+            Next
+            EgtDraw()
+            ' rimetto la selezione scena a null
+            Map.refSceneHostVM.MainScene.SetStatusNull()
+         End If
       End If
    End Sub
 
@@ -1117,6 +1128,22 @@ Public Class RibPanelVM
 
 #Region "CPlaneObj"
 
+   Private m_bCPlaneObj_IsActive As Boolean = False
+   Friend ReadOnly Property bCPlaneObj_IsActive As Boolean
+      Get
+         Return m_bCPlaneObj_IsActive
+      End Get
+   End Property
+   Friend Sub ResetCPlaneObjIsActive()
+      m_bCPlaneObj_IsActive = False
+   End Sub
+   Private m_PrevSelObjs As New List(Of Integer)
+   Friend ReadOnly Property PrevSelObjs As List(Of Integer)
+      Get
+         Return m_PrevSelObjs
+      End Get
+   End Property
+
    ''' <summary>
    ''' Returns a command that do CPlanepObj.
    ''' </summary>
@@ -1134,7 +1161,15 @@ Public Class RibPanelVM
    ''' </summary>
    Public Sub CPlaneObj(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 Then Return
-      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_OBJ)
+      ' salvo selezione precedente e deseleziono altri oggetti
+      Dim nSelObjId As Integer = EgtGetFirstSelectedObj()
+      While nSelObjId <> GDB_ID.NULL
+         m_PrevSelObjs.Add(nSelObjId)
+         nSelObjId = EgtGetNextSelectedObj()
+      End While
+      EgtDeselectAll()
+      m_bCPlaneObj_IsActive = True
+    '  Map.refControllerInputPanelVM.PrepareInputBox("Grid from Selection", "Select the face of the object where to place the grid", "", False, False)
    End Sub
 
 #End Region ' CPlaneObj

Icarus/RibParamPanel/RibParamPanelV.xaml

@@ -58,7 +58,7 @@
                            <Button Grid.Column="2"
                                     Content="R"
                                     Command="{Binding ResetParam_Command}"
-                                    IsEnabled="{Binding bIsModifiedFromDb}"
+                                    IsEnabled="{Binding bIsModifiedFromPart}"
                                     VerticalContentAlignment="Center"
                                     HorizontalContentAlignment="Center"
                                     Margin="5,0,0,0"
@@ -80,7 +80,7 @@
                            <Button Grid.Column="2"
                                     Content="R"
                                     Command="{Binding ResetParam_Command}"
-                                    IsEnabled="{Binding bIsModifiedFromDb}"
+                                    IsEnabled="{Binding bIsModifiedFromPart}"
                                     VerticalContentAlignment="Center"
                                     HorizontalContentAlignment="Center"
                                     Margin="5,0,0,0"

Icarus/RibParamPanel/RibParamPanelVM.vb

@@ -41,12 +41,13 @@ Public Class RibParamPanelVM
 
       m_Type = Cathegories.RIBS
       m_sName = "Ribs"
-      m_MachiningParamList = New List(Of MachiningParam)({New RibNumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nRibId, nPartId),
+      m_MachiningParamList = New List(Of MachiningParam)({New RibComboMachiningParam(MachiningParam.Params.RIBSTYPE, nRibId, nPartId),
+                                                          New RibNumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nRibId, nPartId),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSSTRANDCOUNT, nRibId, nPartId),
-                                                          New RibNumericMachiningParam(MachiningParam.Params.RIBSINVERTDIRECTION, nRibId, nPartId),
-                                                          New RibNumericMachiningParam(MachiningParam.Params.RIBSLEADININVERT, nRibId, nPartId),
+                                                          New RibCheckMachiningParam(MachiningParam.Params.RIBSINVERTDIRECTION, nRibId, nPartId),
+                                                          New RibCheckMachiningParam(MachiningParam.Params.RIBSLEADININVERT, nRibId, nPartId),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSLEADINLEN, nRibId, nPartId),
-                                                          New RibNumericMachiningParam(MachiningParam.Params.RIBSLEADOUTINVERT, nRibId, nPartId),
+                                                          New RibCheckMachiningParam(MachiningParam.Params.RIBSLEADOUTINVERT, nRibId, nPartId),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSLEADOUTLEN, nRibId, nPartId),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSLEADOUTCOASTING, nRibId, nPartId),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSLEADOUTWIPE, nRibId, nPartId),
@@ -70,9 +71,21 @@ Public Class RibParamPanelVM
    Friend Sub WriteParamsInRib(nRibId As Integer)
       ' se parametri modificati
       Dim bModified As Boolean = False
-      For Each Param As RibNumericMachiningParam In m_MachiningParamList
-         If Param.bIsModified AndAlso Not bModified Then bModified = True
-         Param.WriteParamInRib(nRibId)
+      For Each Param In m_MachiningParamList
+         Select Case Param.GetType()
+            Case GetType(RibNumericMachiningParam)
+               Dim NumericParam As RibNumericMachiningParam = TryCast(Param, RibNumericMachiningParam)
+               If NumericParam.bIsModified AndAlso Not bModified Then bModified = True
+               NumericParam.WriteParamInRib(nRibId)
+            Case GetType(RibComboMachiningParam)
+               Dim ComboParam As RibComboMachiningParam = TryCast(Param, RibComboMachiningParam)
+               If ComboParam.bIsModified AndAlso Not bModified Then bModified = True
+               ComboParam.WriteParamInRib(nRibId)
+            Case GetType(RibCheckMachiningParam)
+               Dim CheckParam As RibCheckMachiningParam = TryCast(Param, RibCheckMachiningParam)
+               If CheckParam.bIsModified AndAlso Not bModified Then bModified = True
+               CheckParam.WriteParamInRib(nRibId)
+         End Select
       Next
       If bModified Then
          ' Imposto flag di ricalcolo slice
@@ -324,4 +337,226 @@ Public Class RibNumericMachiningParam
 
 #End Region    ' COMMANDS
 
+End Class
+
+Public Class RibComboMachiningParam
+   Inherits ComboMachiningParam
+
+   Public Overrides Property SelValue As IdNameStruct
+      Get
+         Return m_SelValue
+      End Get
+      Set(value As IdNameStruct)
+         m_SelValue = value
+         NotifyPropertyChanged(NameOf(SelValue))
+         NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+      End Set
+   End Property
+
+   Protected m_PartSelValue As IdNameStruct
+   Public ReadOnly Property PartSelValue As IdNameStruct
+      Get
+         Return m_PartSelValue
+      End Get
+   End Property
+
+   Public ReadOnly Property bIsModifiedFromPart As Boolean
+      Get
+         Return m_SelValue.Id <> m_PartSelValue.Id
+      End Get
+   End Property
+
+   ' Definizione comandi
+   Private m_cmdResetParam As ICommand
+
+   Sub New(Type As Params, nRibId As Integer, nPartId As Integer)
+      MyBase.New(Type)
+      Dim bReadFromRib As Boolean = False
+      Dim bReadFromPart As Boolean = False
+      Select Case Type
+         Case Params.RIBSTYPE
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_RIBSTYPE.INTERNAL, "Internal"),
+                                                     New IdNameStruct(Machining.MPAR_RIBSTYPE.EXTERNAL, "External"),
+                                                     New IdNameStruct(Machining.MPAR_RIBSTYPE.UNBOUNDED, "Unbounded")})
+            Dim nSelValue As Integer = 1
+            bReadFromRib = EgtGetInfo(nRibId, MAC_RIBSTYPE, nSelValue)
+            If bReadFromRib Then
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+            End If
+            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSTYPE, nSelValue)
+            m_PartSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+      End Select
+      m_OrigSelValue = m_SelValue
+      If Not bReadFromRib Then
+         If bReadFromPart Then
+            m_SelValue = m_PartSelValue
+            m_OrigSelValue = m_PartSelValue
+         ElseIf Type = Params.RIBSTYPE Then
+            m_OrigSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = Machining.MPAR_RIBSTYPE.INTERNAL)
+            m_SelValue = m_OrigSelValue
+         End If
+      End If
+   End Sub
+
+   Friend Sub WriteParamInRib(nRibId As Integer)
+      Select Case Type
+         Case Params.RIBSTYPE
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nRibId, MAC_RIBSTYPE, m_SelValue.Id)
+            Else
+               EgtRemoveInfo(nRibId, MAC_RIBSTYPE)
+            End If
+      End Select
+   End Sub
+
+   Friend Overrides Sub SaveParam()
+      m_OrigSelValue = m_SelValue
+   End Sub
+
+   Friend Overrides Sub ResetParam()
+      m_SelValue = m_OrigSelValue
+   End Sub
+
+#Region "COMMANDS"
+
+#Region "ResetParam"
+
+   Public ReadOnly Property ResetParam_Command As ICommand
+      Get
+         If m_cmdResetParam Is Nothing Then
+            m_cmdResetParam = New Command(AddressOf ResetParamCmd)
+         End If
+         Return m_cmdResetParam
+      End Get
+   End Property
+
+   Public Sub ResetParamCmd()
+      m_SelValue = m_PartSelValue
+      NotifyPropertyChanged(NameOf(SelValue))
+      NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+   End Sub
+
+#End Region    ' ResetParam
+
+#End Region    ' COMMANDS
+
+
+End Class
+
+Public Class RibCheckMachiningParam
+   Inherits CheckMachiningParam
+
+   Public Overrides Property bValue As Boolean
+      Get
+         Return m_bValue
+      End Get
+      Set(value As Boolean)
+         m_bValue = value
+         NotifyPropertyChanged(NameOf(bValue))
+         NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+      End Set
+   End Property
+
+   Protected m_bPartValue As Boolean
+   Public ReadOnly Property bPartValue As Boolean
+      Get
+         Return m_bPartValue
+      End Get
+   End Property
+
+   Public ReadOnly Property bIsModifiedFromPart As Boolean
+      Get
+         Return m_bValue <> m_bPartValue
+      End Get
+   End Property
+
+   ' Definizione comandi
+   Private m_cmdResetParam As ICommand
+
+   Sub New(Type As Params, nRibId As Integer, nPartId As Integer)
+      MyBase.New(Type)
+      Dim bReadFromPart As Boolean = False
+      Select Case Type
+         'Case Params.RIBSLINK
+         '   bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSLINK, m_bValue)
+         '   EgtGetInfo(nPartId, MAC_RIBSOVERLAP, m_bPartValue)
+         Case Params.RIBSINVERTDIRECTION
+            bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSINVERTDIRECTION, m_bValue)
+            EgtGetInfo(nPartId, MAC_RIBSINVERTDIRECTION, m_bPartValue)
+         Case Params.RIBSLEADININVERT
+            bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSLEADININVERT, m_bValue)
+            EgtGetInfo(nPartId, MAC_RIBSLEADININVERT, m_bPartValue)
+         Case Params.RIBSLEADOUTINVERT
+            bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSLEADOUTINVERT, m_bValue)
+            EgtGetInfo(nPartId, MAC_RIBSLEADOUTINVERT, m_bPartValue)
+      End Select
+      m_bOrigValue = m_bValue
+      If Not bReadFromPart Then
+         m_bValue = m_bPartValue
+         m_bOrigValue = m_bPartValue
+      End If
+   End Sub
+
+   Friend Sub WriteParamInRib(nRibId As Integer)
+      Select Case Type
+         'Case Params.RIBSLINK
+         '   If bIsModifiedFromPart Then
+         '      EgtSetInfo(nRibId, MAC_RIBSLINK, If(m_bValue, 1, 0))
+         '   Else
+         '      EgtRemoveInfo(nRibId, MAC_RIBSLINK)
+         '   End If
+         Case Params.RIBSINVERTDIRECTION
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nRibId, MAC_RIBSINVERTDIRECTION, If(m_bValue, 1, 0))
+            Else
+               EgtRemoveInfo(nRibId, MAC_RIBSINVERTDIRECTION)
+            End If
+         Case Params.RIBSLEADININVERT
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nRibId, MAC_RIBSLEADININVERT, If(m_bValue, 1, 0))
+            Else
+               EgtRemoveInfo(nRibId, MAC_RIBSLEADININVERT)
+            End If
+         Case Params.RIBSLEADOUTINVERT
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nRibId, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0))
+            Else
+               EgtRemoveInfo(nRibId, MAC_RIBSLEADOUTINVERT)
+            End If
+      End Select
+   End Sub
+
+   Friend Overrides Sub SaveParam()
+      m_bOrigValue = m_bValue
+   End Sub
+
+   Friend Overrides Sub ResetParam()
+      m_bValue = m_bOrigValue
+      NotifyPropertyChanged(NameOf(bValue))
+   End Sub
+
+#Region "COMMANDS"
+
+#Region "ResetParam"
+
+   Public ReadOnly Property ResetParam_Command As ICommand
+      Get
+         If m_cmdResetParam Is Nothing Then
+            m_cmdResetParam = New Command(AddressOf ResetParamCmd)
+         End If
+         Return m_cmdResetParam
+      End Get
+   End Property
+
+   Public Sub ResetParamCmd()
+      m_bValue = m_bPartValue
+      NotifyPropertyChanged(NameOf(bValue))
+      NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+   End Sub
+
+#End Region    ' ResetParam
+
+#End Region    ' COMMANDS
+
+
 End Class

Icarus/SceneHost/MySceneHostVM.vb

@@ -187,12 +187,13 @@ Public Class MySceneHostVM
       MainController.SetSurfTmTolerance(0.05)
       MainController.SetUseCustomColors(True, S_SCENE, K_CUSTOMCOLORS)
       ' imposto unità di misura per interfaccia utente
-      Dim bMmUnits As Boolean = (GetMainPrivateProfileInt(S_SCENE, K_MMUNITS, 1) <> 0)
+      Dim bMmUnits As Boolean = GetMainPrivateProfileInt(S_SCENE, K_MMUNITS, 1) <> 0
       EgtSetUiUnits(bMmUnits)
       'Map.refMyStatusBarVM.SetMeasureUnit(nMeasureUnit <> 0)
       ' imposto visualizzazione riferimento globale
       EgtSetGlobFrameShow(True)
       ' imposto i dati della griglia
+      Dim bGridVisibility As Boolean = (GetMainPrivateProfileInt(S_GRID, K_SHOWGRID, 1) <> 0)
       Dim dSnapStepMm As Double = GetMainPrivateProfileDouble(S_GRID, K_SNAPSTEP, 10)
       Dim dSnapStepInch As Double = GetMainPrivateProfileDouble(S_GRID, K_SNAPSTEPINCH, 10)
       Dim nMinLineSStep As Integer = GetMainPrivateProfileInt(S_GRID, K_MINLINESSTEP, 1)
@@ -209,15 +210,15 @@ Public Class MySceneHostVM
          EgtSetGridGeo(dSnapStepInch, nMinLineSStep, nMajLineSStep, nExtSStep)
       End If
       EgtSetGridColor(MinLnColor, MajLnColor)
-      EgtSetGridShow(True, False)
+      EgtSetGridShow(bGridVisibility, bGridVisibility)
       ' imposto tipo coordinate
       MainScene.SetGridCursorPos(True)
-      ' modo di visualizzazione
-      Dim nShowMode As Integer = GetMainPrivateProfileInt(S_SCENE, K_SHOWMODE, SM.SHADING)
-      'Map.refShowPanelVM.SetShowMode(DirectCast(nShowMode, SM))
       ' visualizzazione avanzata dei triangoli costituenti le superfici
       Dim bShowTriaAdv As Boolean = (GetMainPrivateProfileInt(S_SCENE, K_SHOWTRIAADV, 1) <> 0)
       EgtSetShowTriaAdv(bShowTriaAdv)
+      ' visualizzazione direzione curve
+      Dim bShowCurveDirection As Boolean = (GetMainPrivateProfileInt(S_SCENE, K_CURVEDIR, 0) <> 0)
+      EgtSetShowCurveDirection(bShowCurveDirection)
       ' tipo visualizzazione per Zmap
       Dim nShowZmap As Integer = GetMainPrivateProfileInt(S_SCENE, K_SHOWZMAP, 1)
       EgtSetShowZmap(DirectCast(nShowZmap, ZSM), False)
@@ -225,7 +226,7 @@ Public Class MySceneHostVM
       Dim nTxrMaxLinPix As Integer = GetMainPrivateProfileInt(S_SCENE, K_TEXMAXLINPIX, 4096)
       EgtSetTextureMaxLinPixels(nTxrMaxLinPix)
       ' tipo snap point
-      MainScene.SetSnapPointType(SP.PT_SKETCH)
+      MainScene.SetSnapPointType(SP.PT_GRID)
       ' nascondo input box
       'Map.refFreeContourInputVM.ResetInputBox()
    End Sub
@@ -307,6 +308,8 @@ Public Class MySceneHostVM
       If Not String.IsNullOrWhiteSpace(sDir) Then
          sDir = Path.GetDirectoryName(sDir)
       End If
+      If Not Directory.Exists(sDir) Then sDir = ""
+      Dim ExtIndex As Integer = GetMainPrivateProfileInt(S_PRINTING3D, K_IMPORTCURREXTENSION, 1)
       Dim OpenFileDialog As New OpenFileDialog With {.Title = "Insert",
                                                      .Filter = "Stereolithography (*.stl)|*.stl" &
                                                                "|Iges files (*.igs;*.iges)|*.igs;*.iges" &
@@ -314,11 +317,12 @@ Public Class MySceneHostVM
                                                                "|3D Manufacturing format (*.3mf)|*.3mf" &
                                                                "|New geometry EgalTech(*.nge)|*.nge" &
                                                                "|All Files (*.*)|*.*",
-                                                     .FilterIndex = 1,
+                                                     .FilterIndex = ExtIndex,
                                                      .InitialDirectory = sDir}
       If Not OpenFileDialog.ShowDialog Then
          Return
       End If
+      WriteMainPrivateProfileString(S_PRINTING3D, K_IMPORTCURREXTENSION, OpenFileDialog.FilterIndex)
       Dim sFile As String = String.Empty
       sFile = OpenFileDialog.FileName
       ' importo la nuova geometria
@@ -343,6 +347,7 @@ Public Class MySceneHostVM
       If Not String.IsNullOrWhiteSpace(sDir) Then
          sDir = Path.GetDirectoryName(sDir)
       End If
+      If Not Directory.Exists(sDir) Then sDir = ""
       Dim OpenFileDialog As New OpenFileDialog With {.Title = "Insert",
                                                      .Filter = "Stereolithography (*.stl)|*.stl" &
                                                                "|Iges files (*.igs;*.iges)|*.igs;*.iges" &
@@ -415,6 +420,7 @@ Public Class MySceneHostVM
       If Not String.IsNullOrWhiteSpace(sDir) Then
          sDir = Path.GetDirectoryName(sDir)
       End If
+      If Not Directory.Exists(sDir) Then sDir = ""
       Dim OpenFileDialog As New OpenFileDialog With {.Title = "Insert",
                                                      .Filter = "Stereolithography (*.stl)|*.stl" &
                                                                "|Iges files (*.igs;*.iges)|*.igs;*.iges" &
@@ -839,9 +845,16 @@ Public Class MySceneHostVM
       If Not bOk Then
          MessageBox.Show(Application.Current.MainWindow, EgtMsg(10002), EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)  ' Error on new file  - Error
       End If
+
       Map.refTopPanelVM.PartList.Clear()
       Map.refTopPanelVM.SetSelModifyMode(ModifyModes.NULL)
       Map.refSliceManagerVM.UpdateTimeAndMass()
+      Map.refSliderManagerVM.RefreshSlider(0, 0)
+      Map.refSliderManagerVM.SetLayerIndexToMax()
+
+      ' resetto calcolo solidi
+      Map.refViewLayerManagerVM.ResetSolid()
+
       EgtZoom(ZM.ALL)
       MainScene.SetStatusNull()
    End Sub
@@ -860,6 +873,37 @@ Public Class MySceneHostVM
          End If
          MessageBox.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)        'Error
       End If
+      ' leggo materiale e macchina
+      Dim nTabPartId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, TABLE)
+      If nTabPartId <> GDB_ID.NULL Then
+         Dim sMachineName As String = ""
+         if Not EgtGetInfo(nTabPartId, KEY_MACHINE_NAME, sMachineName) Then sMachineName = "Cms-Kreator" 
+         Dim ProjectMachine As Machine = Map.refMachinePanelVM.MachineList.FirstOrDefault(Function(x) x.Name = sMachineName)
+         If Not IsNothing(ProjectMachine) Then
+            ' imposto la macchina
+            Map.refMachinePanelVM.SelectedMachine = ProjectMachine
+         Else
+            MessageBox.Show("Project machine not found! Impossible to open the project.", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+            Map.refProjManagerVM.NewProject(False)
+            Return
+         End If
+         Dim sMaterialGuid As String = ""
+         EgtGetInfo(nTabPartId, KEY_MATERIAL_GUID, sMaterialGuid)
+         Dim MaterialGuid As Guid
+         Dim ProjectMaterial As MaterialIndex = Nothing
+         If Guid.TryParse(sMaterialGuid, MaterialGuid) Then
+            ' cerco materiale in lista
+            ProjectMaterial = Map.refTopPanelVM.MaterialList.FirstOrDefault(Function(x) x.sGUID = sMaterialGuid)
+         End If
+         If IsNothing(ProjectMaterial) Then
+            Dim sMaterialName As String = EgtSetInfo(nTabPartId, KEY_MATERIAL_GUID, Map.refTopPanelVM.SelMaterial.sName)
+            ProjectMaterial = Map.refTopPanelVM.MaterialList.FirstOrDefault(Function(x) x.sName = sMaterialName)
+         End If
+         If Not IsNothing(ProjectMaterial) Then
+            Map.refTopPanelVM.SetSelMaterial(ProjectMaterial, True)
+            Map.refTopPanelVM.NotifyPropertyChanged(NameOf(Map.refTopPanelVM.SelMaterial))
+         End If
+      End If
       ' leggo pezzi
       Map.refTopPanelVM.PartList.Clear()
       Dim bProjectToRecalc As Boolean = False
@@ -872,16 +916,16 @@ Public Class MySceneHostVM
          End If
          Dim nPrintPartLayerId As Integer = EgtGetFirstNameInGroup(nPartId, PRINT_SOLID)
          Dim nPrintPartId As Integer = EgtGetFirstInGroup(nPrintPartLayerId)
-         Dim nOriginalPartLayerId As Integer = EgtGetFirstNameInGroup(nPartId, ORIGINAL_SOLID)
          Dim nRibsLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_RIBS)
          Dim nShellNumberLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_SHELL_NBR)
          Dim nAuxSolidsLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_AUX_SOLIDS)
          Dim nMachStartLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_MACH_START)
+         Dim nOthersLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_OTHERS)
          Dim sFilePath As String = ""
          EgtGetInfo(nPartId, FILE_PATH, sFilePath)
          Dim nReferenceLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_REFERENCE)
          Dim nFrameId As Integer = EgtGetFirstInGroup(nReferenceLayerId)
-         Dim NewPart As New Print3dPartVM(nPartId, nPrintPartLayerId, nPrintPartId, nOriginalPartLayerId, nReferenceLayerId, nFrameId, nMachStartLayerId, nRibsLayerId, nShellNumberLayerId, nAuxSolidsLayerId, sFilePath)
+         Dim NewPart As New Print3dPartVM(nPartId, nPrintPartLayerId, nReferenceLayerId, nFrameId, nMachStartLayerId, nRibsLayerId, nShellNumberLayerId, nAuxSolidsLayerId, nOthersLayerId, sFilePath)
          Map.refTopPanelVM.PartList.Add(NewPart)
          Dim bPartToRecalc As Boolean = False
          EgtGetInfo(nPartId, MAC_TORECALC_SLICE, bPartToRecalc)
@@ -901,9 +945,14 @@ Public Class MySceneHostVM
          Map.refSliceManagerVM.UpdateTimeAndMass()
       End If
 
+      Map.refSliderManagerVM.SetLayerIndexToMax()
+
       ' seleziono primo pezzo trovato
       Map.refTopPanelVM.SelFirstPart()
 
+      ' resetto calcolo solidi
+      Map.refViewLayerManagerVM.ResetSolid()
+
       ' imposto modalita' modifica
       Map.refTopPanelVM.SelPage = Pages.MODIFY
 
@@ -1127,7 +1176,7 @@ Public Class MySceneHostVM
       While nId <> GDB_ID.NULL
          ' Recupero l'identificativo del pezzo cui appartiene
          Dim nPartId As Integer = EgtGetParent(EgtGetParent(nId))
-         If nPartId = Map.refImportPanelVM.nImportedPartId Then
+         If nPartId = Map.refManagePartPanelVM.nImportedPartId Then
             Dim EntityType As GDB_TY = EgtGetType(nId)
             Select Case EntityType
                Case GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO, GDB_TY.CRV_LINE
@@ -1177,7 +1226,7 @@ Public Class MySceneHostVM
       If Not m_bDragToStart Then
          ' Se selezione da eseguire
       ElseIf m_nIdToSel <> GDB_ID.NULL Then
-         Map.refImportPanelVM.SetSelImportedEntity(m_nIdToSel)
+         Map.refManagePartPanelVM.SetSelImportedEntity(m_nIdToSel)
       End If
       ' Reset
       m_bDrag = False
@@ -1196,19 +1245,35 @@ Public Class MySceneHostVM
       EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSel)
       Dim nId As Integer = EgtGetFirstObjInSelWin()
       While nId <> GDB_ID.NULL
-         ' Recupero l'identificativo del pezzo cui appartiene
-         Dim nPartId As Integer = EgtGetParent(nId)
-         Dim bFound As Boolean = False
-         If nPartId = Map.refStartMachPanelVM.nStartMachLayerId Then bFound = True
-         If Not bFound Then
-            nId = EgtGetNextObjInSelWin()
-            Continue While
+         ' Se per Griglia da faccia di oggetto
+         If Map.refStartMachPanelVM.bCPlaneObj_IsActive Then
+            If EgtGetType( nId) = GDB_TY.SRF_MESH Then
+               m_nIdToSel = nId
+               Exit While
+            End If
+         Else
+            ' Recupero l'identificativo del pezzo cui appartiene
+            Dim nPartId As Integer = EgtGetParent(nId)
+            Dim bFound As Boolean = False
+            If nPartId = Map.refStartMachPanelVM.nStartMachLayerId Then bFound = True
+            If bFound Then
+               m_nIdToSel = nId
+               Exit While
+            End If
          End If
-         ' Memorizzo Id da selezionare
-         m_nIdToSel = nId
-         Exit While
          nId = EgtGetNextObjInSelWin()
       End While
+      If m_nIdToSel <> GDB_ID.NULL Then
+         ' recupero dati punto di selezione
+         Dim PtTemp As Point3d
+         Dim nAux As Integer
+         If EgtGetPointFromSelect(m_nIdToSel, e.Location, PtTemp, nAux) Then
+            ' eseguo la selezione
+            EgtSelectObj(m_nIdToSel)
+            ' dati ausiliari
+            EgtSetSelInfo(m_nIdToSel, nAux, PtTemp)
+         End If
+      End If
       ' Dati per drag
       m_bDragToStart = True
    End Sub
@@ -1229,10 +1294,22 @@ Public Class MySceneHostVM
    Friend Sub StartMach_OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Se eseguito drag
       If Not m_bDragToStart Then
-         ' Se selezione da eseguire
+
+      ' Se selezione da eseguire
       ElseIf m_nIdToSel <> GDB_ID.NULL Then
-         ' Eseguo la selezione
-         Map.refStartMachPanelVM.SelStartFromId(m_nIdToSel)
+         If Map.refStartMachPanelVM.bCPlaneObj_IsActive Then
+            ' eseguo comando
+            Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_OBJ)
+            Map.refStartMachPanelVM.ResetCPlaneObjIsActive()
+            ' ripristino selezioni precedenti
+            For Each Id In Map.refStartMachPanelVM.PrevSelObjs
+               EgtSelectObj(Id)
+            Next
+            Map.refControllerInputPanelVM.ResetInputBox()
+         Else
+            ' Eseguo la selezione
+            Map.refStartMachPanelVM.SelStartFromId(m_nIdToSel)
+         End If
       End If
       ' Reset
       m_bDrag = False
@@ -1252,19 +1329,35 @@ Public Class MySceneHostVM
       EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSel)
       Dim nId As Integer = EgtGetFirstObjInSelWin()
       While nId <> GDB_ID.NULL
-         ' Recupero l'identificativo del pezzo cui appartiene
-         Dim nPartId As Integer = EgtGetParent(nId)
-         Dim bFound As Boolean = False
-         If nPartId = Map.refRibPanelVM.nRibLayerId Then bFound = True
-         If Not bFound Then
-            nId = EgtGetNextObjInSelWin()
-            Continue While
+         ' Se per Griglia da faccia di oggetto
+         If Map.refRibPanelVM.bCPlaneObj_IsActive Then
+            If EgtGetType( nId) = GDB_TY.SRF_MESH Then
+               m_nIdToSel = nId
+               Exit While
+            End If
+         Else
+            ' Recupero l'identificativo del pezzo cui appartiene
+            Dim nPartId As Integer = EgtGetParent(nId)
+            Dim bFound As Boolean = False
+            If nPartId = Map.refRibPanelVM.nRibLayerId Then bFound = True
+            If bFound Then
+               m_nIdToSel = nId
+               Exit While
+            End If
          End If
-         ' Memorizzo Id da selezionare
-         m_nIdToSel = nId
-         Exit While
          nId = EgtGetNextObjInSelWin()
       End While
+      If m_nIdToSel <> GDB_ID.NULL Then
+         ' recupero dati punto di selezione
+         Dim PtTemp As Point3d
+         Dim nAux As Integer
+         If EgtGetPointFromSelect(m_nIdToSel, e.Location, PtTemp, nAux) Then
+            ' eseguo la selezione
+            EgtSelectObj(m_nIdToSel)
+            ' dati ausiliari
+            EgtSetSelInfo(m_nIdToSel, nAux, PtTemp)
+         End If
+      End If
       ' Dati per drag
       m_bDragToStart = True
    End Sub
@@ -1285,10 +1378,22 @@ Public Class MySceneHostVM
    Friend Sub Rib_OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Se eseguito drag
       If Not m_bDragToStart Then
-         ' Se selezione da eseguire
+
+      ' Se selezione da eseguire
       ElseIf m_nIdToSel <> GDB_ID.NULL Then
-         ' Eseguo la selezione
-         Map.refRibPanelVM.SelStartFromId(m_nIdToSel)
+         If Map.refRibPanelVM.bCPlaneObj_IsActive Then
+            ' eseguo comando
+            Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_OBJ)
+            Map.refRibPanelVM.ResetCPlaneObjIsActive()
+            ' ripristino selezioni precedenti
+            For Each Id In Map.refRibPanelVM.PrevSelObjs
+               EgtSelectObj(Id)
+            Next
+            Map.refControllerInputPanelVM.ResetInputBox()
+         Else
+            ' Eseguo la selezione
+            Map.refRibPanelVM.SelStartFromId(m_nIdToSel)
+         End If
       End If
       ' Reset
       m_bDrag = False
@@ -1302,6 +1407,7 @@ Public Class MySceneHostVM
 #Region "ShellNumber"
 
    Friend Sub ShellNumber_OnMouseDownScene(sender As Object, e As Forms.MouseEventArgs)
+      m_nIdToSel = GDB_ID.NULL
       ' Verifico se selezionato indicativo di pezzo
       EgtSetObjFilterForSelWin(True, True, True, True, True)
       Dim nSel As Integer
@@ -1312,15 +1418,23 @@ Public Class MySceneHostVM
          Dim nPartId As Integer = EgtGetParent(nId)
          Dim bFound As Boolean = False
          If nPartId = Map.refShellNumberPanelVM.nShellNumberLayerId Then bFound = True
-         If Not bFound Then
-            nId = EgtGetNextObjInSelWin()
-            Continue While
+         If bFound Then
+            m_nIdToSel = nId
+            Exit While
          End If
-         ' Memorizzo Id da selezionare
-         m_nIdToSel = nId
-         Exit While
          nId = EgtGetNextObjInSelWin()
       End While
+      If m_nIdToSel <> GDB_ID.NULL Then
+         ' recupero dati punto di selezione
+         Dim PtTemp As Point3d
+         Dim nAux As Integer
+         If EgtGetPointFromSelect(m_nIdToSel, e.Location, PtTemp, nAux) Then
+            ' eseguo la selezione
+            EgtSelectObj(m_nIdToSel)
+            ' dati ausiliari
+            EgtSetSelInfo(m_nIdToSel, nAux, PtTemp)
+         End If
+      End If
       ' Dati per drag
       m_bDragToStart = True
    End Sub
@@ -1341,11 +1455,10 @@ Public Class MySceneHostVM
    Friend Sub ShellNumber_OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Se eseguito drag
       If Not m_bDragToStart Then
-         ' Se selezione da eseguire
+
+      ' Se selezione da eseguire
       ElseIf m_nIdToSel <> GDB_ID.NULL Then
          If Map.refShellNumberPanelVM.bCPlaneObj_IsActive Then
-            ' eseguo la selezione
-            EgtSelectObj(m_nIdToSel)
             ' eseguo comando
             Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_OBJ)
             Map.refShellNumberPanelVM.ResetCPlaneObjIsActive()

Icarus/SecondaryWindow/SecondaryWindowV.xaml.vb

@@ -4,6 +4,12 @@ Imports EgtUILib
 Public Class SecondaryWindowV
 
    Private m_SecondaryWindowVM As SecondaryWindowVM
+   Private m_WindowChangingState As Boolean = False
+   Public ReadOnly Property WindowChangingState As Boolean
+      Get
+         Return m_WindowChangingState
+      End Get
+   End Property
 
 #Region "CONSTRUCTOR"
 
@@ -55,9 +61,11 @@ Public Class SecondaryWindowV
    End Sub
 
    Private Sub SecondaryWindowV_StateChanged(sender As Object, e As EventArgs)
+      m_WindowChangingState = True
       Application.Current.MainWindow.WindowState = Me.WindowState
       Application.Current.MainWindow.Topmost = True
       Application.Current.MainWindow.Topmost = False
+      m_WindowChangingState = False
    End Sub
 
 #End Region    ' CONSTRUCTOR

Icarus/SecondaryWindow/SecondaryWindowVM.vb

@@ -1,9 +1,13 @@
 Imports EgtWPFLib5
 Imports EgtUILib
+Imports System.Windows.Threading
 
 Public Class SecondaryWindowVM
    Inherits VMBase
 
+   Private m_SplashScreen_Timer As New DispatcherTimer
+   Private m_WaitAfterRender As Integer = 0
+
    ' Titolo
    Private m_sTitle As String
    Public Property sTitle As String
@@ -47,6 +51,12 @@ Public Class SecondaryWindowVM
    Sub New()
       ' Creo riferimento a questa classe in Map
       Map.SetRefSecondaryWindowVM(Me)
+      ' imposto e avvio contatore SplashScreen
+      m_SplashScreen_Timer.Interval = New TimeSpan(0, 0, 0, 0, 500)
+      AddHandler m_SplashScreen_Timer.Tick, AddressOf SplashScreenTimer_Tick
+      If Not IsNothing(Map.refSplashScreen) Then
+         m_SplashScreen_Timer.Start()
+      End If
    End Sub
 
 #End Region    ' CONSTRUCTOR
@@ -59,14 +69,49 @@ Public Class SecondaryWindowVM
       Map.refMyStatusBarVM.SetSnapPointType(Map.refSceneHostVM.SnapType)
       Map.refMyStatusBarVM.SetMeasureUnit(EgtUiUnitsAreMM)
       EgtSetView(VT.ISO_SW, False)
-      ' creo nuovo progetto di partenza
-      Map.refProjManagerVM.NewProject(False)
+      ' provo a caricare progetto da linea di comando
+      If Not ProcessCommandLine() Then
+         ' altrimenti creo nuovo progetto di partenza
+         Map.refProjManagerVM.NewProject(False)
+      End If
       ' leggo stati visualizzazione layer
       Map.refViewLayerManagerVM.UpdateIsVisibleFromIni()
       ' resetto segnalazione modifiche
       EgtResetModified()
+      ' segno su contatore splashscreen render finito
+      m_WaitAfterRender = 1
    End Sub
 
+   Private Sub SplashScreenTimer_Tick()
+      If m_WaitAfterRender > 1 Then
+         ' chiudo SplashScreen
+         Map.refSplashScreen.Close()
+      ElseIf m_WaitAfterRender > 0 Then
+         m_WaitAfterRender += 1
+      End If
+   End Sub
+
+   Friend Function ProcessCommandLine() As Boolean
+      ' Se non ci sono veri parametri su linea di comando, esco (il primo è sempre il nome del programma)
+      If Environment.GetCommandLineArgs.Count() <= 1 Then Return False
+      ' Recupero il primo vero parametro che dovrebbe essere il nome con estensione di un file
+      Dim sFile As String = Environment.GetCommandLineArgs(1)
+      Dim sExt As String = IO.Path.GetExtension(sFile).ToLower()
+      If String.IsNullOrWhiteSpace(sFile) OrElse String.IsNullOrWhiteSpace(sExt) Then Return False
+      Return OpenStdFile(sFile)
+   End Function
+
+   Friend Function OpenStdFile(sFile As String) As Boolean
+      Dim nFileType As Integer = EgtGetFileType(sFile)
+      Select Case nFileType
+         Case FT.NGE
+            Return Map.refProjManagerVM.OpenProject(sFile)
+            'Case FT.DXF, FT.STL, FT._3MF, FT.OBJ, FT.CNC, FT.CSF, FT.BTL, FT.BTLX, FT.IMG, FT.PNT, FT.IGES, FT.STEP_, FT.ACIS, FT.PARASOLID, FT.JT, FT.VRML, FT.C3D
+            '   Return m_Controller.ImportProject(sFile, False)
+      End Select
+      Return False
+   End Function
+
 #Region "COMMANDS"
 
 #Region "AboutBoxCommand"

Icarus/ShellNumberPanel/ShellNumberPanelV.xaml

@@ -1,22 +1,71 @@
-<StackPanel x:Class="ShellNumberPanelV"
+<Grid x:Class="ShellNumberPanelV"
             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
             xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
             xmlns:PrintApp="clr-namespace:Icarus"
             Margin="5">
-   <StackPanel.Resources>
+   <Grid.Resources>
       <PrintApp:CenterToolTipConverter x:Key="CenterToolTipConverter"/>
-   </StackPanel.Resources>
-   <ComboBox ItemsSource="{Binding ShellNumberList}"
+      <PrintApp:FromBooleanToVisibility x:Key="FromBooleanToVisibility"/>
+   </Grid.Resources>
+   <Grid.ColumnDefinitions>
+      <ColumnDefinition Width="Auto"/>
+      <ColumnDefinition Width="Auto"/>
+   </Grid.ColumnDefinitions>
+   <Grid.RowDefinitions>
+      <RowDefinition Height="1*"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="1*"/>
+   </Grid.RowDefinitions>
+   <ComboBox Grid.Row="3"
+             ItemsSource="{Binding ShellNumberList}"
              SelectedItem="{Binding SelShellNumber}"
              IsEnabled="{Binding ShellNumberList_IsEnabled}"
-             DisplayMemberPath="ghName"/>
+             DisplayMemberPath="ghName"
+             Style="{StaticResource FeatureComboBox}"/>
     <!--Add Button--> 
    <ToggleButton x:Name="AddBtn" 
+                 Grid.Row="4"
                  Content="Add"
                  IsChecked="{Binding bAdd_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=AddBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="3"
+           Grid.RowSpan="3"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=AddBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+         </Grid.ColumnDefinitions>
+         <Button Grid.Column="0"
+                    Command="{Binding Import_Command}"
+                    ToolTip="{Binding Import_ToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/ProjectManager/Import.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="1"
+                    Command="{Binding Line2P_Command}"
+                    ToolTip="{Binding Line2P_ToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/Line2P.png" Stretch="Uniform"/>
+         </Button>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=AddBtn}"
           PlacementTarget="{Binding ElementName=AddBtn}"
           Style="{StaticResource LeftPanel_Popup}">
       <Border Style="{StaticResource LeftPanelPopup_Border}">
@@ -39,13 +88,68 @@
             </Button>
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
     <!--Edit Button--> 
    <ToggleButton x:Name="EditBtn"
+                 Grid.Row="5"
                  Content="Edit"
                  IsChecked="{Binding bEdit_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=EditBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="4"
+           Grid.RowSpan="3"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=EditBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+         </Grid.ColumnDefinitions>
+         <Button Grid.Column="0"
+                    Command="{Binding Delete_Command}"
+                    ToolTip="{Binding Delete_ToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/Delete.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="1"
+                    Command="{Binding ModifyCurve_Command}"
+                    ToolTip="{Binding ModifyCurve_ToolTip}"
+                    Visibility="{Binding Compo_Visibility}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/ModifyCurve.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="2"
+                    Command="{Binding AddPointCurve_Command}"
+                    ToolTip="{Binding AddPointCurve_ToolTip}"
+                    Visibility="{Binding Compo_Visibility}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/AddPointCurve.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="3"
+                    Command="{Binding RemovePointCurve_Command}"
+                    ToolTip="{Binding RemovePointCurve_ToolTip}"
+                    Visibility="{Binding Compo_Visibility}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/RemovePointCurve.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="4"
+                    Command="{Binding Extrude_Command}"
+                    ToolTip="{Binding Extrude_ToolTip}"
+                    Visibility="{Binding Compo_Visibility}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/Extrude.png" Stretch="Uniform"/>
+         </Button>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=EditBtn}"
           PlacementTarget="{Binding ElementName=EditBtn}"
           Style="{StaticResource LeftPanel_Popup}">
       <Border Style="{StaticResource LeftPanelPopup_Border}">
@@ -96,13 +200,90 @@
             </Button>
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
     <!--Grid Button--> 
    <ToggleButton x:Name="GridBtn"
+                 Grid.Row="6"
                  Content="Grid"
                  IsChecked="{Binding bGrid_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=GridBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="5"
+           Grid.RowSpan="3"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=GridBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+         </Grid.ColumnDefinitions>
+         <Button Command="{Binding CPlaneTop_Command}" 
+                    ToolTip="{Binding CPlaneTopToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneTOP.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="1"
+                    Command="{Binding CPlaneFront_Command}" 
+                    ToolTip="{Binding CPlaneFrontToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneFRONT.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="2" 
+                    Command="{Binding CPlaneRight_Command}" 
+                    ToolTip="{Binding CPlaneRightToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneRIGHT.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="3"
+                    Command="{Binding CPlaneBack_Command}" 
+                    ToolTip="{Binding CPlaneBackToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneBACK.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="4"
+                    Command="{Binding CPlaneLeft_Command}"
+                    ToolTip="{Binding CPlaneLeftToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneLEFT.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="5"
+                    Command="{Binding CPlaneBottom_Command}"
+                    ToolTip="{Binding CPlaneBottomToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneBOTTOM.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="6" 
+                    Command="{Binding CPlaneElevation_Command}" 
+                    ToolTip="{Binding CPlaneElevationToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneELEVATION.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="7"
+                    Command="{Binding CPlaneOrigin_Command}"
+                    ToolTip="{Binding CPlaneOriginToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CPlaneORIGIN.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="8"
+                    Command="{Binding CPlaneObj_Command}"
+                    ToolTip="{Binding CPlaneObjToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+               <Image Source="/Resources/GridViewPanel/CplaneOBJECT.png" Stretch="Uniform"/>
+            </Button>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=GridBtn}"
           PlacementTarget="{Binding ElementName=GridBtn}"
           Style="{StaticResource LeftPanel_Popup}">
       <Border Style="{StaticResource LeftPanelPopup_Border}">
@@ -179,21 +360,82 @@
                     Style="{StaticResource ToolBar_Button}">
                <Image Source="/Resources/GridViewPanel/CPlanePERPCURVE.png" Stretch="Uniform"/>
             </Button>
-            <!--<Button Grid.Column="10"
+            --><!--<Button Grid.Column="10"
                     Command="{Binding CPlaneObj_Command}"
                     ToolTip="{Binding CPlaneObjToolTip}" 
                     Style="{StaticResource ToolBar_Button}">
                <Image Source="/Resources/GridViewPanel/CplaneOBJECT.png" Stretch="Uniform"/>
-            </Button>-->
+            </Button>--><!--
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
     <!--Move Button--> 
    <ToggleButton x:Name="MoveBtn" 
+                 Grid.Row="7"
                  Content="Move"
                  IsChecked="{Binding bMove_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=MoveBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="5"
+           Grid.RowSpan="5"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=MoveBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+         </Grid.RowDefinitions>
+         <Grid Margin="0,0,0,2.5">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="X"
+                          VerticalAlignment="Center"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding sXPos, UpdateSourceTrigger=Explicit}"
+                                      Grid.Column="1" 
+                                      Margin="5,0,0,0"
+                                      Style="{StaticResource LeftPanel_TextBox}"/>
+         </Grid>
+         <Grid Grid.Row="1"
+                  Margin="0,2.5,0,2.5">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="Y"
+                          VerticalAlignment="Center"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding sYPos, UpdateSourceTrigger=Explicit}"
+                                      Grid.Column="1" 
+                                      Margin="5,0,0,0"
+                                      Style="{StaticResource LeftPanel_TextBox}"/>
+         </Grid>
+         <Grid Grid.Row="2"
+                  Margin="0,2.5,0,0">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="Z"
+                          VerticalAlignment="Center"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding sZPos, UpdateSourceTrigger=Explicit}"
+                                      Grid.Column="1" 
+                                      Margin="5,0,0,0"
+                                      Style="{StaticResource LeftPanel_TextBox}"/>
+         </Grid>
+         <Grid Grid.Row="3"
+                  Margin="0,2.5,0,0">
+            <Button Content="Drag"
+                       Command="{Binding DragMove_Command}"
+                       Style="{StaticResource LeftPanel_TextButton}"/>
+         </Grid>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=MoveBtn}"
           PlacementTarget="{Binding ElementName=MoveBtn}"
           Style="{StaticResource LeftPanel_Popup}">
       <Border Style="{StaticResource LeftPanelPopup_Border}">
@@ -250,12 +492,52 @@
             </Grid>
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
    <ToggleButton x:Name="RotateBtn"
+                 Grid.Row="8"
                  Content="Rotate"
                  IsChecked="{Binding bRotate_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=RotateBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="6"
+           Grid.RowSpan="5"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=RotateBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+         </Grid.RowDefinitions>
+         <UniformGrid Columns="3">
+            <RadioButton Content="X"
+                            GroupName="Axes"
+                            IsChecked="{Binding RotAxes[0]}"
+                            Style="{StaticResource ToolBar_ToggleButton}"/>
+            <RadioButton Content="Y"
+                            GroupName="Axes"
+                            IsChecked="{Binding RotAxes[1]}"
+                            Style="{StaticResource ToolBar_ToggleButton}"/>
+            <RadioButton Content="Z"
+                            GroupName="Axes"
+                            IsChecked="{Binding RotAxes[2]}"
+                            Style="{StaticResource ToolBar_ToggleButton}"/>
+         </UniformGrid>
+         <EgtWPFLib5:EgtTextBox Grid.Row="1"
+                                   Text="{Binding sRotAngle, UpdateSourceTrigger=Explicit}"
+                                   Margin="0,5,0,0"/>
+         <Grid Grid.Row="2"
+                  Margin="0,2.5,0,0">
+            <Button Content="Drag"
+                       Command="{Binding DragRotate_Command}"
+                       Style="{StaticResource LeftPanel_TextButton}"/>
+         </Grid>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=RotateBtn}"
           Grid.Column="1"
           PlacementTarget="{Binding ElementName=RotateBtn}"
           Style="{StaticResource LeftPanel_Popup}">
@@ -292,9 +574,10 @@
             </Grid>
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
    <ToggleButton Content="Parameters"
+                 Grid.Row="9"
                  IsChecked="{Binding bMachParam_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
 
-</StackPanel>
+</Grid>

Icarus/ShellNumberPanel/ShellNumberPanelVM.vb

@@ -1173,7 +1173,7 @@ Public Class ShellNumberPanelVM
       End While
       EgtDeselectAll()
       m_bCPlaneObj_IsActive = True
-      Map.refControllerInputPanelVM.PrepareInputBox("Grid from Selection", "Select the face of the object where to place the grid", "", False, False)
+    '  Map.refControllerInputPanelVM.PrepareInputBox("Grid from Selection", "Select the face of the object where to place the grid", "", False, False)
    End Sub
 
 #End Region ' CPlaneObj

Icarus/SliceManager/SliceManagerV.xaml

@@ -1,7 +1,7 @@
 <UserControl x:Class="SliceManagerV"
              xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
              xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-             Width="260">
+             Width="320">
    <Border VerticalAlignment="Bottom"
            Style="{StaticResource LeftPanelPopup_Border}">
       <Grid>
@@ -14,10 +14,10 @@
             <RowDefinition Height="Auto"/>
          </Grid.RowDefinitions>
          <TextBlock Text="{Binding ghTime}"
-                    Visibility="{Binding TimeMass_Visibility}"/>
+                    Visibility="{Binding Time_Visibility}"/>
          <TextBlock Grid.Row="1"
                     Text="{Binding ghMass}"
-                    Visibility="{Binding TimeMass_Visibility}"
+                    Visibility="{Binding Mass_Visibility}"
                     Margin="0,0,0,5"/>
          <TextBlock Grid.Row="2"
                     Text="{Binding sLoadingText}"
@@ -44,6 +44,11 @@
                     Style="{StaticResource ToolBar_TextButton}"
                     IsEnabled="{Binding Buttons_IsEnabled}"
                     Visibility="{Binding ModifyMode_Visibility}"/>
+            <Button Content="Update"
+                    Command="{Binding Update_Command}"
+                    Style="{StaticResource ToolBar_TextButton}"
+                    IsEnabled="{Binding Buttons_IsEnabled}"
+                    Visibility="{Binding SliceMode_Visibility}"/>
             <Button Content="Generate"
                     Command="{Binding Generate_Command}"
                     Style="{StaticResource ToolBar_TextButton}"

Icarus/SliceManager/SliceManagerVM.vb

@@ -1,5 +1,7 @@
 Imports EgtWPFLib5
 Imports EgtUILib
+Imports Microsoft.Win32
+Imports System.IO
 
 Public Class SliceManagerVM
    Inherits VMBase
@@ -124,12 +126,18 @@ Public Class SliceManagerVM
       End Get
    End Property
 
-   Public ReadOnly Property TimeMass_Visibility As Visibility
+   Public ReadOnly Property Time_Visibility As Visibility
       Get
          Return If(m_dTime > 0, Visibility.Visible, Visibility.Collapsed)
       End Get
    End Property
 
+   Public ReadOnly Property Mass_Visibility As Visibility
+      Get
+         Return If(m_dMass > 0, Visibility.Visible, Visibility.Collapsed)
+      End Get
+   End Property
+
    Private m_Buttons_IsEnabled As Boolean = True
    Public ReadOnly Property Buttons_IsEnabled As Boolean
       Get
@@ -158,6 +166,7 @@ Public Class SliceManagerVM
    ' Definizione comandi
    Private m_cmdSlice As ICommand
    Private m_cmdSimulate As ICommand
+   Private m_cmdUpdate As ICommand
    Private m_cmdGenerate As ICommand
    Private m_cmdExit As ICommand
 
@@ -200,11 +209,11 @@ Public Class SliceManagerVM
       End If
       NotifyPropertyChanged(NameOf(ghTime))
       NotifyPropertyChanged(NameOf(ghMass))
-      NotifyPropertyChanged(NameOf(TimeMass_Visibility))
+      NotifyPropertyChanged(NameOf(Time_Visibility))
+      NotifyPropertyChanged(NameOf(Mass_Visibility))
    End Sub
 
    Private Function ProcessEvents(ByVal nProg As Integer, ByVal nPause As Integer) As Integer
-      EgtOutLog(nProg)
       ' Se previsto, imposto progress
       If nProg >= 0 Then
          Dim dPartialProgress As Integer = 0
@@ -278,10 +287,18 @@ Public Class SliceManagerVM
       Return 0
    End Function
 
-   Friend Function CalcSlice(bSlice As Boolean, bCalcTFS As Boolean, bGenerate As Boolean) As Boolean
-      m_bSlice = bSlice
-      m_bCalcTFS = bCalcTFS
-      m_bGenerate = bGenerate
+   Friend Function CalcSlice(bGenerate As Boolean, Optional bForceGenerate As Boolean = False) As Boolean
+      ' Verifico nome progetto
+      Dim sCurrProject As String = String.Empty
+      EgtGetCurrFilePath(sCurrProject)
+      If String.IsNullOrWhiteSpace(sCurrProject) Or EgtGetFileType(sCurrProject) <> FT.NGE Then
+         Map.refSceneHostVM.SaveAsProject()
+      End If
+      EgtGetCurrFilePath(sCurrProject)
+      If String.IsNullOrWhiteSpace(sCurrProject) Or EgtGetFileType(sCurrProject) <> FT.NGE Then
+         MessageBox.Show("Save project before calculating slices!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         Return False
+      End If
       ' mostro barre di caricamento
       SetLoadingVisibility(True)
       ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
@@ -293,44 +310,58 @@ Public Class SliceManagerVM
       Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(False)
       SetButtonsIsEnabled(False)
       ' verifico se eseguire slice
+      m_bSlice = False
+      m_bCalcTFS = False
+      m_bGenerate = bGenerate
       Dim bOk As Boolean = True
       Dim bToRecalcSlice As Boolean = False
       Dim bToRecalcTFS As Boolean = False
+      Dim bToRecalcGenerate As Boolean = False
       Dim nPartId As Integer = EgtGetFirstPart()
       While nPartId <> GDB_ID.NULL
          Dim bTemp As Boolean = False
          If EgtGetInfo(nPartId, MAC_TORECALC_SLICE, bTemp) AndAlso bTemp Then
             bToRecalcSlice = True
          End If
-         If EgtGetInfo(nPartId, MAC_TORECALC_GENERATE, bTemp) AndAlso bTemp Then
+         If EgtGetInfo(nPartId, MAC_TORECALC_TFS, bTemp) AndAlso bTemp Then
             bToRecalcTFS = True
          End If
+         If EgtGetInfo(nPartId, MAC_TORECALC_GENERATE, bTemp) AndAlso bTemp Then
+            bToRecalcGenerate = True
+         End If
          nPartId = EgtGetNextPart(nPartId)
       End While
       If bToRecalcSlice Then
          m_bSlice = True
          m_bCalcTFS = True
-         m_bGenerate = True
+         m_bGenerate = bForceGenerate OrElse (bGenerate AndAlso bToRecalcGenerate)
       Else
          m_bSlice = False
          m_bCalcTFS = bToRecalcTFS
-         m_bGenerate = bToRecalcTFS
+         m_bGenerate = bForceGenerate OrElse (bGenerate AndAlso bToRecalcGenerate)
       End If
-      ' aggiorno dati macchina
+      If m_bSlice OrElse m_bCalcTFS Then
+         nPartId = EgtGetFirstPart()
+         While nPartId <> GDB_ID.NULL
+            EgtSetInfo(nPartId, MAC_TORECALC_GENERATE, True)
+            nPartId = EgtGetNextPart(nPartId)
+         End While
+      End If
+      ' Aggiorno dati macchina
       If m_bCalcTFS Then Map.refTFSEditorVM.UpdateSpeedMinMax()
       ' eseguo calcolo slicing, toolpath e solidi
       bOk = ExecSlice(m_bSlice, m_bCalcTFS)
-      ' se calcolo andato a buon fine, rimuovo flag richiesta ricalcolo
+      ' se calcolo andato a buon fine
       If bOk Then
+         ' rimuovo flag richiesta ricalcolo
          Dim nCurrPartId As Integer = EgtGetFirstPart()
          While nCurrPartId <> GDB_ID.NULL
             ' eseguo rimozione flag
-            EgtRemoveInfo(nPartId, MAC_TORECALC_SLICE)
+            If m_bSlice Then EgtRemoveInfo(nCurrPartId, MAC_TORECALC_SLICE)
+            If m_bCalcTFS Then EgtRemoveInfo(nCurrPartId, MAC_TORECALC_TFS)
             nCurrPartId = EgtGetNextPart(nCurrPartId)
          End While
-      End If
-      ' aggiorno massa
-      If bOk Then
+         ' aggiorno massa
          Dim nLayTFSCalcId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, LAY_TFSCALC)
          EgtGetInfo(nLayTFSCalcId, KEY_MASS, m_dMass)
          NotifyPropertyChanged(NameOf(ghMass))
@@ -351,8 +382,6 @@ Public Class SliceManagerVM
          NotifyPropertyChanged(NameOf(ghTime))
          Dim nLayTFSCalcId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, LAY_TFSCALC)
          EgtSetInfo(nLayTFSCalcId, "Ttot", m_dTime)
-         '' eseguo script di uscita da machgroup corrente
-         'ExecExitMachScript()
          ' se calcolo andato a buon fine, rimuovo flag richiesta ricalcolo
          If bOk Then
             Dim nCurrPartId As Integer = EgtGetFirstPart()
@@ -477,7 +506,7 @@ Public Class SliceManagerVM
          m_bCalculating = False
          Return
       End If
-      If IsNothing(Map.refTopPanelVM.SelMachining) Then
+      If IsNothing(Map.refTopPanelVM.SelMachining) OrElse IsNothing(Map.refTopPanelVM.CurrMachining) OrElse Map.refTopPanelVM.CurrMachining.dCurrStrandH <= 0 Then
          MessageBox.Show("No print parameters set!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
          m_bCalculating = False
          Return
@@ -485,15 +514,45 @@ Public Class SliceManagerVM
       ' esco da altre pagine
       Map.refTopPanelVM.SelPage = Pages.NULL
       ' eseguo calcoli
-      CalcSlice(True, True, True)
+      CalcSlice(False)
       Map.refTopPanelVM.SelPage = Pages.SLICE
       Map.refSliderManagerVM.SetLayerIndexToMax()
-      NotifyPropertyChanged(NameOf(TimeMass_Visibility))
+      NotifyPropertyChanged(NameOf(Time_Visibility))
+      NotifyPropertyChanged(NameOf(Mass_Visibility))
       m_bCalculating = False
    End Sub
 
 #End Region ' Slice
 
+#Region "Update"
+
+   ''' <summary>
+   ''' Returns a command that do CPlaneTop.
+   ''' </summary>
+   Public ReadOnly Property Update_Command As ICommand
+      Get
+         If m_cmdUpdate Is Nothing Then
+            m_cmdUpdate = New Command(AddressOf Update)
+         End If
+         Return m_cmdUpdate
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Execute the CPlaneTop.  This method is invoked by the CPlaneTopCommand.
+   ''' </summary>
+   Public Sub Update()
+      If m_bCalculating Then Return
+      m_bCalculating = True
+      ' eseguo calcoli
+      CalcSlice(False)
+      NotifyPropertyChanged(NameOf(Time_Visibility))
+      NotifyPropertyChanged(NameOf(Mass_Visibility))
+      m_bCalculating = False
+   End Sub
+
+#End Region ' Update
+
 #Region "Generate"
 
    ''' <summary>
@@ -514,8 +573,63 @@ Public Class SliceManagerVM
    Public Sub Generate()
       If m_bCalculating Then Return
       m_bCalculating = True
+      Dim bShiftPressed As Boolean = (Keyboard.Modifiers And ModifierKeys.Shift) = ModifierKeys.Shift
+      Dim bCtrlPressed As Boolean = (Keyboard.Modifiers And ModifierKeys.Control) = ModifierKeys.Control
+      ' se shift chiedo nome
+      Dim sIsoFilePath As String = ""
+      Dim sExtension As String = ""
+      GetPrivateProfileString(S_PARTPROGRAM, K_EXTENSION, "", sExtension, CurrentMachine.sMachIniFile)
+      If String.IsNullOrWhiteSpace(sExtension) Then
+         sExtension = ".cnc"
+      End If
+      If bShiftPressed Then
+         Dim sCurrFilePath As String = ""
+         Dim sInitialDirectory As String = ""
+         EgtGetCurrFilePath(sCurrFilePath)
+         If Not IsNothing(sCurrFilePath) Then
+            sInitialDirectory = System.IO.Path.ChangeExtension(sCurrFilePath, sExtension)
+         End If
+         Dim NewSaveFileDialog As New Windows.Forms.SaveFileDialog With {.Title = "ISO File Name",
+                                                     .Filter = "|*" & sExtension,
+                                                     .FilterIndex = 1,
+                                                     .InitialDirectory = System.IO.Path.GetDirectoryName(sInitialDirectory),
+                                                     .FileName = sInitialDirectory,
+                                                     .CreatePrompt = True,
+                                                     .OverwritePrompt = True,
+                                                     .ValidateNames = False}
+         Dim bResult As Boolean? = NewSaveFileDialog.ShowDialog()
+         If IsNothing(bResult) OrElse Not bResult Then
+            m_bCalculating = False
+            Return
+         End If
+         Dim nTabPartId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, TABLE)
+         If nTabPartId <> GDB_ID.NULL Then
+            EgtSetInfo(nTabPartId, KEY_ISOFILE_PATH, NewSaveFileDialog.FileName)
+            sIsoFilePath = NewSaveFileDialog.FileName
+         End If
+      Else
+         Dim nTabPartId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, TABLE)
+         If nTabPartId <> GDB_ID.NULL Then
+            EgtGetInfo(nTabPartId, KEY_ISOFILE_PATH, sIsoFilePath)
+            If String.IsNullOrWhiteSpace(sIsoFilePath) Then
+               EgtGetCurrFilePath(sIsoFilePath)
+               sIsoFilePath = System.IO.Path.ChangeExtension(sIsoFilePath, sExtension)
+            End If
+         End If
+      End If
       ' eseguo calcoli
-      CalcSlice(True, True, True)
+      CalcSlice(True, True)
+      If bCtrlPressed Then
+         ' Se esiste ne lancio l'editing
+         If File.Exists(sIsoFilePath) Then
+            Process.Start("Notepad.exe", sIsoFilePath)
+            ' altrimenti lo segnalo
+         Else
+            MessageBox.Show("Edit failed, missing part program file" & " (" & sIsoFilePath & ")")
+         End If
+      End If
+      NotifyPropertyChanged(NameOf(Time_Visibility))
+      NotifyPropertyChanged(NameOf(Mass_Visibility))
       m_bCalculating = False
    End Sub
 
@@ -539,6 +653,10 @@ Public Class SliceManagerVM
    ''' Execute the CPlaneTop.  This method is invoked by the CPlaneTopCommand.
    ''' </summary>
    Public Sub Simulate()
+      m_bCalculating = True
+      ' eseguo calcoli
+      CalcSlice(True)
+      m_bCalculating = False
       ' verifico esistenza e correttezza machgroup
       InitMachGroup(False)
       ' apro simulazione

Icarus/SliderManager/SliderManagerVM.vb

@@ -123,7 +123,7 @@ Public Class SliderManagerVM
       Get
          Dim dH As Double = 0
          If Not IsNothing(Map.refTopPanelVM.CurrMachining) Then
-            If Map.refTopPanelVM.CurrMachining.bCurrSlicing45 Then
+            If Map.refTopPanelVM.CurrMachining.dCurrSlicingType = Machining.MPAR_SLICINGTYPE.DEG45 Then
                Return m_nLayerIndex
             Else
                Return m_nLayerIndex & " (" & DoubleToString(m_nLayerIndex * Map.refTopPanelVM.CurrMachining.dCurrStrandH, 0) & "mm)"
@@ -138,7 +138,7 @@ Public Class SliderManagerVM
       Get
          Dim dH As Double = 0
          If Not IsNothing(Map.refTopPanelVM.CurrMachining) Then
-            If Map.refTopPanelVM.CurrMachining.bCurrSlicing45 Then
+            If Map.refTopPanelVM.CurrMachining.dCurrSlicingType = Machining.MPAR_SLICINGTYPE.DEG45 Then
                Return m_nLayerIndex_Maximum
             Else
                Return m_nLayerIndex_Maximum & " (" & DoubleToString(m_nLayerIndex_Maximum * Map.refTopPanelVM.CurrMachining.dCurrStrandH, 0) & "mm)"

Icarus/SplashScreen/SplashScreen.xaml

@@ -0,0 +1,41 @@
+<Window x:Class="SplashScreen"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        WindowStartupLocation="CenterScreen"
+        WindowStyle="None"
+        AllowsTransparency="True"
+        Background="Transparent"
+        Topmost="True"
+        ShowInTaskbar="False"
+        Height="600" 
+        Width="1000">
+   <Grid>
+      <Image Source="/Resources/SplashScreen/GoldSplashscreen.png" 
+             Stretch="UniformToFill"/>
+      <TextBlock Text="ICARUS"
+                 Foreground="#b9984c"
+                 FontSize="47"
+                 FontFamily="/Resources/Fonts/#Roboto"
+                 FontWeight="Light"
+                 Margin="463,125,0,0"/>
+      <TextBlock x:Name="VersionTxBl"
+                 FontSize="14"
+                 FontFamily="/Resources/Fonts/#Roboto"
+                 Margin="500,175,0,0"/>
+      <Grid Height="180"
+            Width="92"
+            VerticalAlignment="Bottom"
+            Margin="620,0,0,0">
+         <Image Source="/Resources/SplashScreen/LogoEgalware.png"
+                Height="180"
+                Width="92"
+                Stretch="UniformToFill"/>
+         <TextBlock Text="2022"
+                    FontSize="12"
+                    FontFamily="/Resources/Fonts/#Roboto"
+                    HorizontalAlignment="Center"
+                    Margin="0,140,0,0"/>
+         
+      </Grid>
+   </Grid>
+</Window>

Icarus/SplashScreen/SplashScreen.xaml.vb

@@ -0,0 +1,10 @@
+Public Class SplashScreen
+
+   Private Sub SplashScreen_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      VersionTxBl.Text = "Version " & My.Application.Info.Version.Major.ToString() &
+                         "." & My.Application.Info.Version.Minor.ToString() &
+                         (ChrW(97 - 1 + My.Application.Info.Version.Build)).ToString() &
+                         My.Application.Info.Version.Revision.ToString()
+   End Sub
+
+End Class

Icarus/StartMachPanel/StartMachPanelV.xaml

@@ -1,21 +1,68 @@
-<StackPanel x:Class="StartMachPanelV"
+<Grid x:Class="StartMachPanelV"
             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
             xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
             xmlns:PrintApp="clr-namespace:Icarus"
             Margin="5">
-   <StackPanel.Resources>
+   <Grid.Resources>
       <PrintApp:CenterToolTipConverter x:Key="CenterToolTipConverter"/>
-   </StackPanel.Resources>
-   <ComboBox ItemsSource="{Binding StartList}"
+      <PrintApp:FromBooleanToVisibility x:Key="FromBooleanToVisibility"/>
+   </Grid.Resources>
+   <Grid.ColumnDefinitions>
+      <ColumnDefinition Width="Auto"/>
+      <ColumnDefinition Width="Auto"/>
+   </Grid.ColumnDefinitions>
+   <Grid.RowDefinitions>
+      <RowDefinition Height="1*"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="Auto"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="{Binding ActualHeight, ElementName=MoveBtn}"/>
+      <RowDefinition Height="1*"/>
+   </Grid.RowDefinitions>
+   <ComboBox Grid.Row="3"
+             ItemsSource="{Binding StartList}"
              SelectedItem="{Binding SelStart}"
-             DisplayMemberPath="ghName"/>
+             DisplayMemberPath="ghName"
+             Style="{StaticResource FeatureComboBox}"/>
    <!-- Add Button -->
-   <ToggleButton x:Name="AddBtn" 
+   <ToggleButton x:Name="AddBtn"
+                 Grid.Row="4"
                  Content="Add"
                  IsChecked="{Binding bAdd_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=AddBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="3"
+           Grid.RowSpan="3"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=AddBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+         </Grid.ColumnDefinitions>
+         <Button Grid.Column="0"
+                    Command="{Binding Point_Command}"
+                    ToolTip="{Binding Point_ToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/Point.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="1"
+                    Command="{Binding Line2P_Command}"
+                    ToolTip="{Binding Line2P_ToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/Line2P.png" Stretch="Uniform"/>
+         </Button>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=AddBtn}"
           PlacementTarget="{Binding ElementName=AddBtn}"
           Style="{StaticResource LeftPanel_Popup}">
       <Border Style="{StaticResource LeftPanelPopup_Border}">
@@ -38,13 +85,61 @@
             </Button>
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
    <!-- Edit Button -->
    <ToggleButton x:Name="EditBtn"
+                 Grid.Row="5"
                  Content="Edit"
                  IsChecked="{Binding bEdit_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=EditBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="4"
+           Grid.RowSpan="3"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=EditBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+         </Grid.ColumnDefinitions>
+         <Button Grid.Column="0"
+                    Command="{Binding Delete_Command}"
+                    ToolTip="{Binding Delete_ToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/Delete.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="1"
+                    Command="{Binding ModifyCurve_Command}"
+                    ToolTip="{Binding ModifyCurve_ToolTip}"
+                    Visibility="{Binding Compo_Visibility}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/ModifyCurve.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="2"
+                    Command="{Binding AddPointCurve_Command}"
+                    ToolTip="{Binding AddPointCurve_ToolTip}"
+                    Visibility="{Binding Compo_Visibility}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/AddPointCurve.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="3"
+                    Command="{Binding RemovePointCurve_Command}"
+                    ToolTip="{Binding RemovePointCurve_ToolTip}"
+                    Visibility="{Binding Compo_Visibility}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/DrawPanel/RemovePointCurve.png" Stretch="Uniform"/>
+         </Button>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=EditBtn}"
           PlacementTarget="{Binding ElementName=EditBtn}"
           Style="{StaticResource LeftPanel_Popup}">
       <Border Style="{StaticResource LeftPanelPopup_Border}">
@@ -88,13 +183,88 @@
             </Button>
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
    <!-- Grid Button -->
    <ToggleButton x:Name="GridBtn"
+                 Grid.Row="6"
                  Content="Grid"
                  IsChecked="{Binding bGrid_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=GridBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="5"
+           Grid.RowSpan="3"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=GridBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+         </Grid.ColumnDefinitions>
+         <Button Command="{Binding CPlaneTop_Command}" 
+                    ToolTip="{Binding CPlaneTopToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneTOP.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="1"
+                    Command="{Binding CPlaneFront_Command}" 
+                    ToolTip="{Binding CPlaneFrontToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneFRONT.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="2" 
+                    Command="{Binding CPlaneRight_Command}" 
+                    ToolTip="{Binding CPlaneRightToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneRIGHT.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="3"
+                    Command="{Binding CPlaneBack_Command}" 
+                    ToolTip="{Binding CPlaneBackToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneBACK.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="4"
+                    Command="{Binding CPlaneLeft_Command}"
+                    ToolTip="{Binding CPlaneLeftToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneLEFT.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="5"
+                    Command="{Binding CPlaneBottom_Command}"
+                    ToolTip="{Binding CPlaneBottomToolTip}"
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneBOTTOM.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="6" 
+                    Command="{Binding CPlaneElevation_Command}" 
+                    ToolTip="{Binding CPlaneElevationToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneELEVATION.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="7"
+                    Command="{Binding CPlaneOrigin_Command}"
+                    ToolTip="{Binding CPlaneOriginToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneORIGIN.png" Stretch="Uniform"/>
+         </Button>
+         <Button Grid.Column="8"
+                    Command="{Binding CPlaneObj_Command}"
+                    ToolTip="{Binding CPlaneObjToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneOBJECT.png" Stretch="Uniform"/>
+         </Button>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=GridBtn}"
           PlacementTarget="{Binding ElementName=GridBtn}"
           Style="{StaticResource LeftPanel_Popup}">
       <Border Style="{StaticResource LeftPanelPopup_Border}">
@@ -158,13 +328,74 @@
             </Button>
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
    <!-- Move Button -->
    <ToggleButton x:Name="MoveBtn" 
+                 Grid.Row="7"
                  Content="Move"
                  IsChecked="{Binding bMove_IsChecked}"
                  Style="{StaticResource ToolBar_TextToggleButton}"/>
-   <Popup IsOpen="{Binding IsChecked, ElementName=MoveBtn}"
+   <Border Grid.Column="1"
+           Grid.Row="5"
+           Grid.RowSpan="5"
+           VerticalAlignment="Center"
+           Margin="5,0,0,0"
+           Visibility="{Binding IsChecked, ElementName=MoveBtn, Converter={StaticResource FromBooleanToVisibility}}"
+           Style="{StaticResource LeftPanelPopup_Border}">
+      <Grid>
+         <Grid.RowDefinitions>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="Auto"/>
+         </Grid.RowDefinitions>
+         <Grid Margin="0,0,0,2.5">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="X"
+                          VerticalAlignment="Center"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding sXPos, UpdateSourceTrigger=Explicit}"
+                                      Grid.Column="1" 
+                                      Margin="5,0,0,0"
+                                      Style="{StaticResource LeftPanel_TextBox}"/>
+         </Grid>
+         <Grid Grid.Row="1"
+                  Margin="0,2.5,0,2.5">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="Y"
+                          VerticalAlignment="Center"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding sYPos, UpdateSourceTrigger=Explicit}"
+                                      Grid.Column="1" 
+                                      Margin="5,0,0,0"
+                                      Style="{StaticResource LeftPanel_TextBox}"/>
+         </Grid>
+         <Grid Grid.Row="2"
+                  Margin="0,2.5,0,0">
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="1*"/>
+            </Grid.ColumnDefinitions>
+            <TextBlock Text="Z"
+                          VerticalAlignment="Center"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding sZPos, UpdateSourceTrigger=Explicit}"
+                                      Grid.Column="1" 
+                                      Margin="5,0,0,0"
+                                      Style="{StaticResource LeftPanel_TextBox}"/>
+         </Grid>
+         <Grid Grid.Row="3"
+                  Margin="0,2.5,0,0">
+            <Button Content="Drag"
+                       Command="{Binding DragMove_Command}"
+                       Style="{StaticResource LeftPanel_TextButton}"/>
+         </Grid>
+      </Grid>
+   </Border>
+   <!--<Popup IsOpen="{Binding IsChecked, ElementName=MoveBtn}"
           PlacementTarget="{Binding ElementName=MoveBtn}"
           Style="{StaticResource LeftPanel_Popup}">
       <Border Style="{StaticResource LeftPanelPopup_Border}">
@@ -221,6 +452,6 @@
             </Grid>
          </Grid>
       </Border>
-   </Popup>
+   </Popup>-->
    
-</StackPanel>
+</Grid>

Icarus/StartMachPanel/StartMachPanelVM.vb

@@ -421,7 +421,18 @@ Public Class StartMachPanelVM
 
    Friend Sub OnKeyDown(Key As Forms.Keys)
       If Key = Forms.Keys.Escape Then
-
+         ' se attiva, disattivo griglia su oggetto
+         If m_bCPlaneObj_IsActive Then
+            m_bCPlaneObj_IsActive = False
+            ResetCPlaneObjIsActive()
+            ' ripristino selezioni precedenti
+            For Each Id In Map.refShellNumberPanelVM.PrevSelObjs
+               EgtSelectObj(Id)
+            Next
+            EgtDraw()
+            ' rimetto la selezione scena a null
+            Map.refSceneHostVM.MainScene.SetStatusNull()
+         End If
       End If
    End Sub
 
@@ -789,6 +800,54 @@ Public Class StartMachPanelVM
 
 #End Region ' CPlaneOrigin
 
+#Region "CPlaneObj"
+
+   Private m_bCPlaneObj_IsActive As Boolean = False
+   Friend ReadOnly Property bCPlaneObj_IsActive As Boolean
+      Get
+         Return m_bCPlaneObj_IsActive
+      End Get
+   End Property
+   Friend Sub ResetCPlaneObjIsActive()
+      m_bCPlaneObj_IsActive = False
+   End Sub
+   Private m_PrevSelObjs As New List(Of Integer)
+   Friend ReadOnly Property PrevSelObjs As List(Of Integer)
+      Get
+         Return m_PrevSelObjs
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Returns a command that do CPlanepObj.
+   ''' </summary>
+   Public ReadOnly Property CPlaneObj_Command As ICommand
+      Get
+         If m_cmdCPlaneObj Is Nothing Then
+            m_cmdCPlaneObj = New Command(AddressOf CPlaneObj)
+         End If
+         Return m_cmdCPlaneObj
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Execute the CPlaneObj.  This method is invoked by the CPlaneObjCommand.
+   ''' </summary>
+   Public Sub CPlaneObj(ByVal param As Object)
+      If Map.refSceneHostVM.MainController.GetStep <> 0 Then Return
+      ' salvo selezione precedente e deseleziono altri oggetti
+      Dim nSelObjId As Integer = EgtGetFirstSelectedObj()
+      While nSelObjId <> GDB_ID.NULL
+         m_PrevSelObjs.Add(nSelObjId)
+         nSelObjId = EgtGetNextSelectedObj()
+      End While
+      EgtDeselectAll()
+      m_bCPlaneObj_IsActive = True
+    '  Map.refControllerInputPanelVM.PrepareInputBox("Grid from Selection", "Select the face of the object where to place the grid", "", False, False)
+   End Sub
+
+#End Region ' CPlaneObj
+
 #Region "DragMove"
 
    Public ReadOnly Property DragMove_Command As ICommand

Icarus/StatusBar/MyStatusBarVM.vb

@@ -17,15 +17,27 @@ Public Class MyStatusBarVM
       End Get
    End Property
 
-   'Public ReadOnly Property CurrMachine As String
-   '   Get
-   '      Return If(Not IsNothing(Map.refMachinePanelVM.SelectedMachine), Map.refMachinePanelVM.SelectedMachine.Name, "")
-   '   End Get
-   'End Property
+   Private m_bGridVisibility As Boolean
+   Public Property bGridVisibility As Boolean
+      Get
+         Return m_bGridVisibility
+      End Get
+      Set(value As Boolean)
+         m_bGridVisibility = value
+         EgtSetGridShow(value, value)
+         EgtDraw()
+      End Set
+   End Property
 
    ' Definizione comandi
    Private m_cmdStopProgress As ICommand
 
+   Public ReadOnly Property GridVisibilityMsg As String
+      Get
+         Return "GRID"
+      End Get
+   End Property
+
    Sub New()
       ' Creo riferimento a questa classe in Map
       Map.SetRefMyStatusBarVM(Me)
@@ -33,6 +45,14 @@ Public Class MyStatusBarVM
       EgtSetProcessEvents(m_ProcEventsCallback)
       ' Installo funzione output testo su status per lua
       EgtSetOutText(m_OutTextCallback)
+      ' imposto stato di visualizzazione della griglia
+      m_bGridVisibility = GetMainPrivateProfileInt(S_GRID, K_SHOWGRID, 1) <> 0
+      NotifyPropertyChanged(NameOf(bGridVisibility))
+      ' modo di visualizzazione
+      Dim nShowMode As Integer = GetMainPrivateProfileInt(S_SCENE, K_SHOWMODE, SM.SHADING)
+      Map.refShowPanelVM.SetShowMode(DirectCast(nShowMode, SM))
+      ' visualizzazione freccia direzione su curve
+      Map.refShowPanelVM.CurveDirIsChecked = EgtGetShowCurveDirection()
    End Sub
 
    Friend Overloads Sub SetSnapPointType(sSnapPntType As SP)

Icarus/StatusBar/StatusBarV.xaml

@@ -16,6 +16,7 @@
                <ColumnDefinition Width="Auto"/>
                <ColumnDefinition Width="Auto"/>
                <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="Auto"/>
             </Grid.ColumnDefinitions>
          </Grid>
       </ItemsPanelTemplate>
@@ -121,16 +122,24 @@
       <TextBlock Text="{Binding OutputMessage}"
                  Foreground="{Binding OutputMessage_Foreground}"/>
    </StatusBarItem>
-   
-   <!--Indica il tipo di punto notevole selezionato-->
+
+   <!--Indica se la griglia è attiva o disattiva-->
    <StatusBarItem Grid.Column="4">
+      <ToggleButton Content="{Binding GridVisibilityMsg}"
+                    IsChecked="{Binding bGridVisibility}" 
+                    Width="80"/>
+   </StatusBarItem>
+
+   <!--Indica il tipo di punto notevole selezionato-->
+   <StatusBarItem Grid.Column="5">
       <Button Content="{Binding SnapPointType}"
               Background="{Binding SnapPointType_Background}"
+              IsHitTestVisible="False"
               Width="80"/>
    </StatusBarItem>
    
    <!--Indica la posizione del mouse quando è sulla scena-->
-   <StatusBarItem Grid.Column="5">
+   <StatusBarItem Grid.Column="6">
       <TextBlock Text="{Binding CurrPos}"
                  TextAlignment="Center"
                  Foreground="Black"
@@ -138,17 +147,10 @@
    </StatusBarItem>
    
    <!--Indica l'unità di misura-->
-   <StatusBarItem Grid.Column="6">
+   <StatusBarItem Grid.Column="7">
       <TextBlock Text="{Binding MeasureUnit}"
                  Foreground="Black"
                  Width="35"/>
    </StatusBarItem>
 
-   <!--Indica la macchina corrente--><!--
-   <StatusBarItem Grid.Column="7">
-      <TextBlock Text="{Binding CurrMachine}"
-                 Foreground="Black"
-                 Margin="0,0,5,0"/>
-   </StatusBarItem>-->
-
 </StatusBar>

Icarus/TSFEditor/TFSEditorV.xaml

@@ -17,7 +17,7 @@
          <WrapPanel Orientation="Horizontal" x:Name="TFSEditorStackPanel">
             <ComboBox ItemsSource="{Binding MediaTypeList}"
                       SelectedIndex="{Binding ghSelMediaType}"
-                      Margin="0,0,10,0"
+                      Margin="0,5,10,5"
                       Style="{StaticResource PartParam_ComboBox}"/>
             <Grid>
                <Grid.ColumnDefinitions>
@@ -31,11 +31,13 @@
                   </Grid.ColumnDefinitions>
                   <TextBlock Text="Slice Number:"
                              Visibility="{Binding MediaHeight_Visibility}"
+                             Margin="2.5,0,2.5,0"
                              Style="{StaticResource TSFEditor_TextBlock}"/>
                   <TextBox Grid.Column="1"
                            Text="{Binding sMediaHeight}"
                            Width="50"
                            Visibility="{Binding MediaHeight_Visibility}"
+                           Margin="2.5,0,2.5,0"
                            Style="{StaticResource ControllerInputPanel_TextBox}"/>
                </Grid>
                <Grid>
@@ -45,11 +47,13 @@
                   </Grid.ColumnDefinitions>
                   <TextBlock Text="Difference:"
                              Visibility="{Binding Difference_Visibility}"
+                             Margin="2.5,0,2.5,0"
                              Style="{StaticResource TSFEditor_TextBlock}"/>
                   <TextBox Grid.Column="1"
                            Text="{Binding sDifference}"
                            Width="50"
                            Visibility="{Binding Difference_Visibility}"
+                           Margin="2.5,0,2.5,0"
                            Style="{StaticResource ControllerInputPanel_TextBox}"/>
                </Grid>
                <Grid>
@@ -59,11 +63,13 @@
                   </Grid.ColumnDefinitions>
                   <TextBlock Text="F:"
                              Visibility="{Binding FCurr_Visibility}"
+                             Margin="2.5,0,2.5,0"
                              Style="{StaticResource TSFEditor_TextBlock}"/>
                   <TextBox Grid.Column="1"
                            Text="{Binding sFCurr}"
                            Width="50"
                            Visibility="{Binding FCurr_Visibility}"
+                           Margin="2.5,0,2.5,0"
                            Style="{StaticResource ControllerInputPanel_TextBox}"/>
                </Grid>
                <StackPanel Grid.Column="1"
@@ -71,12 +77,15 @@
                   <Button Content="Set"
                           Command="{Binding Set_Command}"
                           Visibility="{Binding FCurr_Visibility}"
+                          Margin="2.5,0,2.5,0"
                           Style="{StaticResource ToolBar_TextButton}"/>
                   <Button Content="Media"
                           Command="{Binding Media_Command}"
+                          Margin="2.5,0,2.5,0"
                           Style="{StaticResource ToolBar_TextButton}"/>
                   <Button Content="Reset"
                           Command="{Binding Reset_Command}"
+                          Margin="2.5,0,2.5,0"
                           Style="{StaticResource ToolBar_TextButton}"/>
                </StackPanel>
             </Grid>
@@ -92,7 +101,7 @@
                    ScrollViewer.CanContentScroll="True" 
                    ScrollViewer.VerticalScrollBarVisibility="Auto"
                    ScrollViewer.HorizontalScrollBarVisibility="Auto"
-                   Margin="0,0,0,5">
+                   Margin="0,5,0,5">
             <DataGrid.Columns>
                <DataGridTextColumn Header="Index" 
                                    Binding="{Binding nIndex}"
@@ -166,9 +175,11 @@
          <StackPanel Grid.Row="2" Orientation="Horizontal">
             <ComboBox ItemsSource="{Binding FilterList}"
                       SelectedIndex="{Binding nSelFilter}"
+                      Margin="0,0,2.5,0"
                       Style="{StaticResource PartParam_ComboBox}"/>
             <Button Content="Extend"
                     Command="{Binding Extend_Command}"
+                    Margin="2.5,0,2.5,0"
                     Style="{StaticResource ToolBar_TextButton}"/>
          </StackPanel>
       </Grid>

Icarus/TSFEditor/TFSEditorVM.vb

@@ -465,9 +465,9 @@ Public Class TFSEditorVM
       Dim nLayTFSCalcId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, LAY_TFSCALC)
       EgtEmptyGroup(nLayTFSCalcId)
       For Each CurrPart In Map.refTopPanelVM.PartList
-         EgtSetInfo(CurrPart.nPartId, MAC_TORECALC_GENERATE, True)
+         EgtSetInfo(CurrPart.nPartId, MAC_TORECALC_TFS, True)
       Next
-      Map.refSliceManagerVM.CalcSlice(False, True, True)
+      Map.refSliceManagerVM.CalcSlice(False)
    End Sub
 
 #End Region ' Reset
@@ -585,7 +585,7 @@ Public Class TFSLayer
             EgtSetInfo(nId, "WaitingTime", m_dTWait)
             m_bTWait_IsModified = True
             ' Imposto flag di ricalcolo generate
-            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_GENERATE, True)
+            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_TFS, True)
             NotifyPropertyChanged(NameOf(Background))
          Else
             NotifyPropertyChanged(NameOf(sTWait))
@@ -597,7 +597,7 @@ Public Class TFSLayer
       EgtSetInfo(nId, "WaitingTime", m_dTWait)
       m_bTWait_IsModified = True
       ' Imposto flag di ricalcolo generate
-      EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_GENERATE, True)
+      EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_TFS, True)
       NotifyPropertyChanged(NameOf(Background))
       NotifyPropertyChanged(NameOf(sTWait))
    End Sub
@@ -642,7 +642,7 @@ Public Class TFSLayer
             EgtSetInfo(nId, "FCur", m_dFCurr)
             m_bFCurr_IsModified = True
             ' Imposto flag di ricalcolo generate
-            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_GENERATE, True)
+            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_TFS, True)
             NotifyPropertyChanged(NameOf(Background))
          Else
             NotifyPropertyChanged(NameOf(sFCurr))
@@ -654,7 +654,7 @@ Public Class TFSLayer
       EgtSetInfo(nId, "FCur", m_dFCurr)
       m_bFCurr_IsModified = True
       ' Imposto flag di ricalcolo generate
-      EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_GENERATE, True)
+      EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_TFS, True)
       NotifyPropertyChanged(NameOf(Background))
       NotifyPropertyChanged(NameOf(sFCurr))
    End Sub

Icarus/TopPanel/TopPanelV.xaml

@@ -36,17 +36,17 @@
                 Grid.Row="1"
                 ItemsSource="{Binding PartList}"
                 SelectedItem="{Binding SelPart}"
-                DisplayMemberPath="sImportedFileName"
+                DisplayMemberPath="sName"
                 FontSize="14"
                 FontFamily="/Resources/Fonts/#Roboto"
                 FontWeight="Light"
                 VerticalContentAlignment="Center">
       </ComboBox>
-      <!--<Button Grid.Column="1"
+      <Button Grid.Column="1"
               Command="{Binding PartModify_Command}"
               Style="{StaticResource PrintParamDb_Button}">
          <Image Source="/Resources/TopPanel/Edit.png"/>
-      </Button>-->
+      </Button>
    </Grid>
    <ToggleButton x:Name="ModifyBtn"
                  Content="{Binding SelectedItem.sName, ElementName=ModifyModeListBox}"
@@ -148,8 +148,8 @@
                        Style="{StaticResource PrintParam_ToggleButton}">
             <Grid HorizontalAlignment="Stretch">
                <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="3*"/>
+                  <ColumnDefinition Width="1.5*"/>
                   <ColumnDefinition Width="2*"/>
                   <ColumnDefinition Width="1*"/>
                   <ColumnDefinition Width="2*"/>
@@ -159,10 +159,10 @@
                   <ColumnDefinition Width="2*"/>
                   <ColumnDefinition Width="1*"/>
                </Grid.ColumnDefinitions>
-               <TextBlock Text="45°:"
+               <TextBlock Text="Slicing direction:"
                           HorizontalAlignment="Right"/>
                <TextBlock Grid.Column="1"
-                          Text="{Binding CurrMachining.bCurrSlicing45}"
+                          Text="{Binding CurrMachining.sCurrSlicingType}"
                           HorizontalAlignment="Left"/>
                <TextBlock Grid.Column="2"
                           Text="StrandH:"

Icarus/TopPanel/TopPanelVM.vb

@@ -205,19 +205,37 @@ Public Class TopPanelVM
       Set(value As MaterialIndex)
          ' salvo materiale selezionato come ultimo utilizzato
          If Not IsNothing(value) Then WriteMainPrivateProfileString(S_PRINTING3D, K_CURRMATERIAL, value.sGUID)
-         ' salvo selezionato per riselezionarlo
-         Dim PrevMachiningGuid As Guid = m_SelMachining.sGUID
+         ' salvo lavorazione selezionata per riselezionarla
+         Dim PrevMachiningGuid As Guid = Guid.Empty
+         If Not IsNothing(m_SelMachining) Then PrevMachiningGuid = m_SelMachining.sGUID
          ' seleziono materiale
          m_SelMaterial = value
+         ' scrivo materiale sulla tavola
+         If Not IsNothing(m_SelMaterial) Then
+            Dim nTabPartId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, TABLE)
+            If nTabPartId <> GDB_ID.NULL Then
+               EgtSetInfo(nTabPartId, KEY_MATERIAL_GUID, Map.refTopPanelVM.SelMaterial.sGUID)
+               EgtSetInfo(nTabPartId, KEY_MATERIAL_NAME, Map.refTopPanelVM.SelMaterial.sName)
+            End If
+         End If
          ' ricarico lista lavorazioni valide per il materiale selezionato
          InitMachiningsList()
          Dim PrevMachining As MachiningIndex = m_MachiningList.FirstOrDefault(Function(x) x.sGUID = PrevMachiningGuid)
-         SetSelMachining(If(Not IsNothing(PrevMachining), PrevMachining, Nothing))
+         SetSelMachining(If(Not IsNothing(PrevMachining), PrevMachining, MachiningIndex.Empty()))
       End Set
    End Property
-   Friend Sub SetSelMaterial(value As MaterialIndex)
+   Friend Sub SetSelMaterial(value As MaterialIndex, Optional bUpdateMaterialList As Boolean = False)
       m_SelMaterial = value
       NotifyPropertyChanged(NameOf(SelMaterial))
+      If bUpdateMaterialList Then
+         ' salvo lavorazione selezionata per riselezionarla
+         Dim PrevMachiningGuid As Guid = Guid.Empty
+         If Not IsNothing(m_SelMachining) Then PrevMachiningGuid = m_SelMachining.sGUID
+         ' ricarico lista lavorazioni valide per il materiale selezionato
+         InitMachiningsList()
+         Dim PrevMachining As MachiningIndex = m_MachiningList.FirstOrDefault(Function(x) x.sGUID = PrevMachiningGuid)
+         SetSelMachining(If(Not IsNothing(PrevMachining), PrevMachining, MachiningIndex.Empty()))
+      End If
    End Sub
 
 #End Region    ' Material
@@ -259,7 +277,7 @@ Public Class TopPanelVM
          m_MachiningList.Remove(MachiningIndex.Empty())
       End If
       ' se nuova lavorazione e' none
-      If SelMachining.sGUID = Guid.Empty Then
+      If SelMachining.sGUID = Guid.Empty AndAlso Not MachiningList.Any(Function(x) x.sGUID = MachiningIndex.Empty.sGUID) Then
          ' aggiungo lavorazione vuota
          MachiningList.Insert(0, MachiningIndex.Empty())
       End If
@@ -385,11 +403,25 @@ Public Class TopPanelVM
 #Region "Pages"
 
    Private Sub InitIMPORT()
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(False)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(False)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(False)
+      ' imposto pagina
       Map.refLeftPanelVM.SetSelPanel(LeftPanelVM.Panels.IMPORT)
-      Map.refImportPanelVM.Init()
+      ''Map.refImportPanelVM.Init()
+      Map.refManagePartPanelVM.Init(ManagePartPanelVM.ManagePartType.IMPORT)
    End Sub
 
    Private Function ExitIMPORT()
+      ' riabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(True)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(True)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(True)
       Return True
    End Function
 
@@ -432,38 +464,100 @@ Public Class TopPanelVM
    End Function
 
    Private Sub InitMATERIALDB()
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(False)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(False)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(False)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(False)
+      ' imposto pagina
       Map.refRightPanelVM.SetSelPanel(RightPanelVM.Panels.MATERIALDB)
    End Sub
 
    Private Function ExitMATERIALDB()
-
+      ' riabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(True)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(True)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(True)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(True)
       Return True
    End Function
 
    Private Sub InitMACHININGDB()
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(False)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(False)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(False)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(False)
+      ' imposto pagina
       Map.refRightPanelVM.SetSelPanel(RightPanelVM.Panels.PRINTPARAMDB)
    End Sub
 
    Private Function ExitMACHININGDB()
-
+      ' riabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(True)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(True)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(True)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(True)
       Return True
    End Function
 
    Private Sub InitCURRMACHINING()
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(False)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(False)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(False)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(False)
+      ' imposto pagina
       Map.refRightPanelVM.SetSelPanel(RightPanelVM.Panels.CURRPRINTPARAM)
    End Sub
 
    Private Function ExitCURRMACHINING()
-
+      ' riabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(True)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(True)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(True)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(True)
       Return True
    End Function
 
    Private Sub InitMODIFYPART()
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(False)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(False)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(False)
+      ' tolgo mark da pezzo selezionato
+      If Not IsNothing(SelPart) Then
+         EgtResetMark(SelPart.nPrintSolidId)
+      End If
+      ' imposto pagina
       Map.refLeftPanelVM.SetSelPanel(LeftPanelVM.Panels.MODIFYPART)
    End Sub
 
    Private Function ExitMODIFYPART()
-
+      ' riabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(True)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(True)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(True)
+      ' ripristino mark su pezzo selezionato
+      If Not IsNothing(SelPart) Then
+         EgtSetMark(SelPart.nPrintSolidId)
+      End If
       Return True
    End Function
 
@@ -479,8 +573,8 @@ Public Class TopPanelVM
       ' rinomino pezzo e layer
       Dim nPartId As Integer = EgtGetLastPart()
       EgtSetName(nPartId, PART)
-      Dim nLayerId As Integer = EgtGetFirstInGroup(nPartId)
-      EgtSetName(nLayerId, ORIGINAL_SOLID)
+      'Dim nLayerId As Integer = EgtGetFirstInGroup(nPartId)
+      'EgtSetName(nLayerId, ORIGINAL_SOLID)
 
       '' Recupero o creo layer ausiliario
       'Dim nAuxId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_AUX)

Icarus/Utility/CurrentMachine.vb

@@ -79,7 +79,8 @@ Public Module CurrentMachine
       Dim nQqqId = EgtAddMachGroup("qqq")
       EgtSetTable("Tab")
       EgtGetTableArea(1, m_b3Tab)
-      EgtRemoveMachGroup(nQqqId Or GDB_ID.NULL)
+      EgtResetCurrMachGroup()
+      EgtRemoveMachGroup(nQqqId)
       ' carico materiali e lavorazioni
       Map.refTopPanelVM.InitMaterialList()
       Map.refMaterialDbVM.Init()
@@ -116,33 +117,36 @@ Public Module CurrentMachine
       EgtSetName(nTabOutlineId, TABLE_OUTLINE)
       ' scrivo il  nome macchina sulla tavola
       EgtSetInfo(nTabPartId, KEY_MACHINE_NAME, CurrentMachine.sMachineName)
+      ' scrivo materiale sulla tavola
+      If Not IsNothing(Map.refTopPanelVM.SelMaterial) Then
+         EgtSetInfo(nTabPartId, KEY_MATERIAL_GUID, Map.refTopPanelVM.SelMaterial.sGUID)
+         EgtSetInfo(nTabPartId, KEY_MATERIAL_NAME, Map.refTopPanelVM.SelMaterial.sName)
+      End If
       ' Ripristino stato segnalazione modifica
       DisableMgr.ReEnable()
    End Sub
 
    Friend Function ReadMachiningParamString(lpAppName As String, lpKeyName As String, lpDefault As String, ByRef lpString As String) As Integer
-      Dim nResult As Integer = GetPrivateProfileString(lpAppName, lpKeyName, lpDefault, lpString, m_sMachiningFilePath)
+      Dim nResult As Integer = GetPrivateProfileString(lpAppName, lpKeyName, "", lpString, m_sMachiningFilePath)
       If Not String.IsNullOrWhiteSpace(lpString) Then
-         ' lpString = EgwCrypto.DecryptString(lpString, m_Salt)
          lpString = EgwCrypto.PowerDecryptString(lpString, m_Salt)
       Else
-         lpString = ""
+         lpString = lpDefault
       End If
       Return nResult
    End Function
 
    Friend Function ReadMachiningParamSplit(lpAppName As String, lpKeyName As String, lpDefault As String, ByRef lpString As String) As Integer
-      Dim nResult As Integer = GetPrivateProfileString(lpAppName, lpKeyName, lpDefault, lpString, m_sMachiningFilePath)
+      Dim nResult As Integer = GetPrivateProfileString(lpAppName, lpKeyName, "", lpString, m_sMachiningFilePath)
       If Not String.IsNullOrWhiteSpace(lpString) Then
          Dim Values() As String = lpString.Split(";"c)
          Dim sCryptoValues As String = ""
          For ValueIndex = 0 To Values.Count - 1
             sCryptoValues += EgwCrypto.PowerDecryptString(Values(ValueIndex), m_Salt) & If(ValueIndex < Values.Count - 1, ";", "")
-            'sCryptoValues += EgwCrypto.DecryptString(Values(ValueIndex), m_Salt) & If(ValueIndex < Values.Count - 1, ";", "")
          Next
          lpString = sCryptoValues
       Else
-         lpString = ""
+         lpString = lpDefault
       End If
       Return nResult
    End Function
@@ -175,7 +179,6 @@ Public Module CurrentMachine
    Friend Function ReadMaterialParamString(lpAppName As String, lpKeyName As String, lpDefault As String, ByRef lpString As String) As Integer
       Dim nResult As Integer = GetPrivateProfileString(lpAppName, lpKeyName, lpDefault, lpString, m_sMaterialsFilePath)
       If Not String.IsNullOrWhiteSpace(lpString) Then
-         'lpString = EgwCrypto.DecryptString(lpString, m_Salt)
          lpString = EgwCrypto.PowerDecryptString(lpString, m_Salt)
       Else
          lpString = ""

Icarus/Utility/Dictionary.xaml

@@ -29,7 +29,7 @@
    <PrintApp:DispositionPanelVM x:Key="DispositionPanelVM"/>
    <PrintApp:StartMachPanelVM x:Key="StartMachPanelVM"/>
    <PrintApp:RibPanelVM x:Key="RibPanelVM"/>
-   <PrintApp:ImportPanelVM x:Key="ImportPanelVM"/>
+   <!--<PrintApp:ImportPanelVM x:Key="ImportPanelVM"/>-->
    <PrintApp:TopPanelVM x:Key="TopPanelVM"/>
    <PrintApp:ControllerInputPanelVM x:Key="ControllerInputPanelVM"/>
    <PrintApp:SliceManagerVM x:Key="SliceManagerVM"/>
@@ -44,6 +44,8 @@
    <PrintApp:SimulationPanelVM x:Key="SimulationPanelVM"/>
    <PrintApp:ReferencePanelVM x:Key="ReferencePanelVM"/>
    <PrintApp:ViewLayerManagerVM x:Key="ViewLayerManagerVM"/>
+   <!--<PrintApp:ModifyPartPanelVM x:Key="ModifyPartPanelVM"/>-->
+   <PrintApp:ManagePartPanelVM x:Key="ManagePartPanelVM"/>
    <!--<EgtBEAMWALL:CALCPanelVM x:Key="CALCPanelVM"/>
    <EgtBEAMWALL:PartParametersVM x:Key="PartParametersVM"/>
    <EgtBEAMWALL:LeftPanelVM x:Key="LeftPanelVM"/>

Icarus/Utility/EgwCrypto.vb

@@ -66,7 +66,11 @@ Public Module EgwCrypto
 
    Public Function PowerDecryptString(ByVal Message As String, ByVal Passphrase As String) As String
       Dim sTransformMessage As String = DecryptString(Message, Passphrase)
-      Return sTransformMessage.Substring(8, sTransformMessage.Length - 16)
+      If sTransformMessage.Length() >= 16 Then
+         Return sTransformMessage.Substring(8, sTransformMessage.Length - 16)
+      Else
+         Return ""
+      End If
    End Function
 
    'Public  Function getHashStringMD5(ByVal Message As String) As String

Icarus/Utility/GeomEntityColors.vb

@@ -0,0 +1,57 @@
+Imports EgtUILib
+
+Module GeomEntityColors
+
+   Private m_c3Print As Color3d
+   Public ReadOnly Property c3Print As Color3d
+      Get
+         Return m_c3Print
+      End Get
+   End Property
+
+   Private m_c3MachStart As Color3d
+   Public ReadOnly Property c3MachStart As Color3d
+      Get
+         Return m_c3MachStart
+      End Get
+   End Property
+
+   Private m_c3Rib As Color3d
+   Public ReadOnly Property c3Rib As Color3d
+      Get
+         Return m_c3Rib
+      End Get
+   End Property
+
+   Private m_c3ShellNumber As Color3d
+   Public ReadOnly Property c3ShellNumber As Color3d
+      Get
+         Return m_c3ShellNumber
+      End Get
+   End Property
+
+   Private m_c3AuxSolids As Color3d
+   Public ReadOnly Property c3AuxSolids As Color3d
+      Get
+         Return m_c3AuxSolids
+      End Get
+   End Property
+
+   Private m_c3Others As Color3d
+   Public ReadOnly Property c3Others As Color3d
+      Get
+         Return m_c3Others
+      End Get
+   End Property
+
+   Sub New()
+      ' imposto colori superfici
+      m_c3Print.FromColor(System.Drawing.Color.Aqua)
+      m_c3MachStart.FromColor(System.Drawing.Color.Red)
+      m_c3Rib.FromColor(System.Drawing.Color.MediumOrchid)
+      m_c3ShellNumber.FromColor(System.Drawing.Color.Lime)
+      m_c3AuxSolids.FromColor(System.Drawing.Color.DarkGoldenrod)
+      m_c3Others.FromColor(System.Drawing.Color.LightGray)
+   End Sub
+
+End Module

Icarus/Utility/LuaExec.vb

@@ -23,8 +23,15 @@ Module LuaExec
       End If
       ' Assegno i dati
       Dim SelMaterialParam As Material = Map.refTopPanelVM.GetSelMaterialData()
+      Dim dMachiningConstant As Double = 100
+      If Not IsNothing(Map.refTopPanelVM.CurrMachining) Then
+         Dim MachiningConstant As CurrNumericMachiningParam = Map.refTopPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(y) y.Type = MachiningParam.Params.FLOWRATE_PC)
+         If Not IsNothing(MachiningConstant) Then
+            dMachiningConstant = MachiningConstant.dValue
+         End If
+      End If
       EgtLuaCreateGlobTable("MATERIAL")
-      EgtLuaSetGlobNumVar("MATERIAL.K", SelMaterialParam.dK)
+      EgtLuaSetGlobNumVar("MATERIAL.K", dMachiningConstant)
       EgtLuaSetGlobNumVar("MATERIAL.C1", SelMaterialParam.dC1)
       EgtLuaSetGlobNumVar("MATERIAL.C2", SelMaterialParam.dC2)
       EgtLuaSetGlobNumVar("MATERIAL.Density", SelMaterialParam.dDensity)
@@ -59,6 +66,20 @@ Module LuaExec
       ' eseguo generazione
       EgtLuaCreateGlobTable("PRINT")
       EgtLuaSetGlobIntVar("PRINT.PROGRAM", 1)
+      Dim sIsoFilePath As String = ""
+      Dim nTabPartId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, TABLE)
+      If nTabPartId <> GDB_ID.NULL Then
+         If Not EgtGetInfo(nTabPartId, KEY_ISOFILE_PATH, sIsoFilePath) Then
+            EgtGetCurrFilePath(sIsoFilePath)
+            Dim sExtension As String = ""
+            GetPrivateProfileString(S_PARTPROGRAM, K_EXTENSION, "", sExtension, CurrentMachine.sMachIniFile)
+            If String.IsNullOrWhiteSpace(sExtension) Then
+               sExtension = ".cnc"
+            End If
+            sIsoFilePath = System.IO.Path.ChangeExtension(sIsoFilePath, sExtension)
+         End If
+      End If
+      EgtLuaSetGlobStringVar("PRINT.ISOFILEPATH", sIsoFilePath)
       Dim bOk As Boolean = EgtLuaExecFile(Map.refMainWindowVM.MainWindowM.s3dPrintingDir & "\GcodeGenerate.lua")
       If bOk Then
          Dim nErr As Integer = 999
@@ -71,7 +92,7 @@ Module LuaExec
    End Function
 
    Friend Function ExecSolid() As Boolean
-      EgtOutLog("-- Start ExecGenerate --")
+      EgtOutLog("-- Start ExecSolid --")
       ' eseguo generazione
       EgtLuaCreateGlobTable("PRINT")
       Dim bOk As Boolean = EgtLuaExecFile(Map.refMainWindowVM.MainWindowM.s3dPrintingDir & "\CalcSolids.lua")

Icarus/Utility/Map.vb

@@ -47,7 +47,7 @@ Module Map
    'Private m_refSplitModeVM As SplitModeVM
    'Private m_refMoveRawModeVM As MoveRawModeVM
    'Private m_refSimulTabVM As SimulTabVM
-   Private m_refImportPanelVM As ImportPanelVM
+   ''Private m_refImportPanelVM As ImportPanelVM
    Private m_refSliceManagerVM As SliceManagerVM
    Private m_refTFSEditorVM As TFSEditorVM
    Private m_refCurrMachiningPanelVM As CurrMachiningPanelVM
@@ -60,6 +60,9 @@ Module Map
    Private m_refViewLayerManagerVM As ViewLayerManagerVM
    Private m_refShellNumberPanelVM As ShellNumberPanelVM
    Private m_refShellNumberParamPanelVM As ShellNumberParamPanelVM
+   Private m_refSplashScreen As SplashScreen
+   ''Private m_refModifyPartPanelVM As ModifyPartPanelVM
+   Private m_refManagePartPanelVM As ManagePartPanelVM
 
 #Region "Get"
 
@@ -104,11 +107,11 @@ Module Map
       End Get
    End Property
 
-   'Public ReadOnly Property refShowPanelVM As ShowPanelVM
-   '   Get
-   '      Return LibMap.refShowPanelVM
-   '   End Get
-   'End Property
+   Public ReadOnly Property refShowPanelVM As ShowPanelVM
+      Get
+         Return LibMap.refShowPanelVM
+      End Get
+   End Property
 
    'Public ReadOnly Property refMainMenuVM As MainMenuVM
    '   Get
@@ -344,11 +347,11 @@ Module Map
    '   End Get
    'End Property
 
-   Public ReadOnly Property refImportPanelVM As ImportPanelVM
-      Get
-         Return m_refImportPanelVM
-      End Get
-   End Property
+   'Public ReadOnly Property refImportPanelVM As ImportPanelVM
+   '   Get
+   '      Return m_refImportPanelVM
+   '   End Get
+   'End Property
 
    Public ReadOnly Property refSliceManagerVM As SliceManagerVM
       Get
@@ -422,6 +425,24 @@ Module Map
       End Get
    End Property
 
+   Public ReadOnly Property refSplashScreen As SplashScreen
+      Get
+         Return m_refSplashScreen
+      End Get
+   End Property
+
+   ''Public ReadOnly Property refModifyPartPanelVM As ModifyPartPanelVM
+   ''   Get
+   ''      Return m_refModifyPartPanelVM
+   ''   End Get
+   ''End Property
+
+   Public ReadOnly Property refManagePartPanelVM As ManagePartPanelVM
+      Get
+         Return m_refManagePartPanelVM
+      End Get
+   End Property
+
 #End Region    ' Get
 
 #Region "Set"
@@ -660,10 +681,10 @@ Module Map
    '   Return Not IsNothing(m_refSimulTabVM)
    'End Function
 
-   Friend Function SetRefImportPanelVM(ImportPanelVM As ImportPanelVM) As Boolean
-      m_refImportPanelVM = ImportPanelVM
-      Return Not IsNothing(m_refImportPanelVM)
-   End Function
+   ''Friend Function SetRefImportPanelVM(ImportPanelVM As ImportPanelVM) As Boolean
+   ''   m_refImportPanelVM = ImportPanelVM
+   ''   Return Not IsNothing(m_refImportPanelVM)
+   ''End Function
 
    Friend Function SetRefSliceManagerVM(SliceManagerVM As SliceManagerVM) As Boolean
       m_refSliceManagerVM = SliceManagerVM
@@ -725,6 +746,21 @@ Module Map
       Return Not IsNothing(m_refShellNumberParamPanelVM)
    End Function
 
+   Friend Function SetRefSplashScreen(SplashScreen As SplashScreen) As Boolean
+      m_refSplashScreen = SplashScreen
+      Return Not IsNothing(m_refSplashScreen)
+   End Function
+
+   ''Friend Function SetRefModifyPartPanelVM(ModifyPartPanelVM As ModifyPartPanelVM) As Boolean
+   ''   m_refModifyPartPanelVM = ModifyPartPanelVM
+   ''   Return Not IsNothing(m_refModifyPartPanelVM)
+   ''End Function
+
+   Friend Function SetRefManagePartPanelVM(ManagePartPanelVM As ManagePartPanelVM) As Boolean
+      m_refManagePartPanelVM = ManagePartPanelVM
+      Return Not IsNothing(m_refManagePartPanelVM)
+   End Function
+
 #End Region    ' Set
 
 #Region "Init"

Icarus/Utility/MyMachine.vb

@@ -31,4 +31,27 @@ Public Class MyMachine
       Return True
    End Function
 
+   Friend Shared Function InsertMachine(sPath As String, MachineList As IList(Of Machine)) As Boolean
+      ' Verifico presenza file caratteristici
+      Dim sName As String = Path.GetFileName(sPath)
+      Dim MachineIniPath As String = sPath & "\" & sName & ".ini"
+      Dim MachineMldePath As String = sPath & "\" & sName & ".mlde"
+      If Not File.Exists(MachineIniPath) Or Not File.Exists(MachineMldePath) Then Return False
+      ' Cerco la posizione di inserimento
+      Dim nPos As Integer = 0
+      For nI As Integer = 0 To MachineList.Count() - 1
+         Dim nRes As Integer = String.Compare(sName, MachineList(nI).Name, True)
+         If nRes = 0 Then
+            Return True
+         ElseIf nRes < 0 Then
+            Exit For
+         Else
+            nPos += 1
+         End If
+      Next
+      ' Inserisco nella lista
+      MachineList.Insert(nPos, New MyMachine(sPath, MachineIniPath))
+      Return True
+   End Function
+
 End Class

Icarus/ViewLayerManager/ViewLayerManagerVM.vb

@@ -44,7 +44,23 @@ Public Class ViewLayerManagerVM
                                                             New ViewLayer(ViewLayer.ViewLayerType.SHELL_NUMBER, "Reduce Shell Number", True),
                                                             New ViewLayer(ViewLayer.ViewLayerType.AUX_SOLIDS, "Filled Solids", True),
                                                             New ViewLayer(ViewLayer.ViewLayerType.SOLID_SLICE, "Solid Slice", True),
-                                                            New ViewLayer(ViewLayer.ViewLayerType.SLICE_TOOLPATH, "Slice Toolpath", True)})
+                                                            New ViewLayer(ViewLayer.ViewLayerType.SLICE_TOOLPATH, "Slice Toolpath", True),
+                                                            New ViewLayer(ViewLayer.ViewLayerType.OTHERS, "Others", True)})
+   End Sub
+
+   Friend Sub ResetSolid()
+      Dim ViewLayerSolid As ViewLayer = m_LayerList.FirstOrDefault(Function(x) x.Type = ViewLayer.ViewLayerType.SOLID_SLICE)
+      If Not IsNothing(ViewLayerSolid) Then
+         ViewLayerSolid.bIsVisible = False
+         If Map.refTopPanelVM.SelPage = Pages.MODIFY Then
+            WriteMainPrivateProfileString(S_VIEWLAYER, K_SLC_SOLIDSLICE, "0")
+         ElseIf Map.refTopPanelVM.SelPage = Pages.SLICE Then
+            WriteMainPrivateProfileString(S_VIEWLAYER, K_MOD_SOLIDSLICE, "0")
+         ElseIf Map.refTopPanelVM.SelPage = Pages.NULL then
+            WriteMainPrivateProfileString(S_VIEWLAYER, K_MOD_SOLIDSLICE, "0")
+            WriteMainPrivateProfileString(S_VIEWLAYER, K_SLC_SOLIDSLICE, "0")
+         End If
+      End If
    End Sub
 
    Friend Sub UpdateIsVisibleFromIni()
@@ -81,6 +97,7 @@ Public Class ViewLayer
       AUX_SOLIDS = 6
       SOLID_SLICE = 7
       SLICE_TOOLPATH = 8
+      OTHERS = 9
    End Enum
 
    Private m_Type As ViewLayerType
@@ -208,6 +225,8 @@ Public Class ViewLayer
                      EgtSetStatus(Entity, Status)
                   Next
                Next
+            Case ViewLayerType.OTHERS
+               EgtSetStatus(CurrPart.nOthersLayerId, Status)
          End Select
       Next
       ' Ripristino stato segnalazione modifica
@@ -258,6 +277,8 @@ Public Class ViewLayer
                   nStatus = If(bSolid, GetMainPrivateProfileInt(S_VIEWLAYER, K_MOD_SOLIDSLICE, 1), 0)
                Case ViewLayerType.SLICE_TOOLPATH
                   nStatus = GetMainPrivateProfileInt(S_VIEWLAYER, K_MOD_SLICETOOLPATH, 1)
+               Case ViewLayerType.OTHERS
+                  nStatus = GetMainPrivateProfileInt(S_VIEWLAYER, K_MOD_OTHERS, 1)
             End Select
          Case Pages.SLICE
             Select Case m_Type
@@ -277,6 +298,8 @@ Public Class ViewLayer
                   nStatus = GetMainPrivateProfileInt(S_VIEWLAYER, K_SLC_SOLIDSLICE, 1)
                Case ViewLayerType.SLICE_TOOLPATH
                   nStatus = GetMainPrivateProfileInt(S_VIEWLAYER, K_SLC_SLICETOOLPATH, 1)
+               Case ViewLayerType.OTHERS
+                  nStatus = GetMainPrivateProfileInt(S_VIEWLAYER, K_SLC_OTHERS, 1)
             End Select
       End Select
       m_IsVisible = nStatus
@@ -305,6 +328,8 @@ Public Class ViewLayer
                   WriteMainPrivateProfileString(S_VIEWLAYER, K_MOD_SOLIDSLICE, nStatus)
                Case ViewLayerType.SLICE_TOOLPATH
                   WriteMainPrivateProfileString(S_VIEWLAYER, K_MOD_SLICETOOLPATH, nStatus)
+               Case ViewLayerType.OTHERS
+                  WriteMainPrivateProfileString(S_VIEWLAYER, K_MOD_OTHERS, nStatus)
             End Select
          Case Pages.SLICE
             Select Case m_Type
@@ -324,6 +349,8 @@ Public Class ViewLayer
                   WriteMainPrivateProfileString(S_VIEWLAYER, K_SLC_SOLIDSLICE, nStatus)
                Case ViewLayerType.SLICE_TOOLPATH
                   WriteMainPrivateProfileString(S_VIEWLAYER, K_SLC_SLICETOOLPATH, nStatus)
+               Case ViewLayerType.OTHERS
+                  WriteMainPrivateProfileString(S_VIEWLAYER, K_SLC_OTHERS, nStatus)
             End Select
       End Select
    End Sub

Icarus/ViewModel/Print3dPartVM.vb

@@ -1,7 +1,9 @@
 Imports System.Collections.ObjectModel
 Imports EgtUILib
+Imports EgtWPFLib5
 
 Public Class Print3dPartVM
+   Inherits VMBase
 
    Private m_nPartId As Integer
    Public ReadOnly Property nPartId As Integer
@@ -17,18 +19,9 @@ Public Class Print3dPartVM
          Return m_nPrintSolidLayerId
       End Get
    End Property
-   Private m_nPrintSolidId As Integer = GDB_ID.NULL
    Public ReadOnly Property nPrintSolidId As Integer
       Get
-         Return m_nPrintSolidId
-      End Get
-   End Property
-
-   ' solido/superficie originale
-   Private m_nOriginalPartLayerId As Integer = GDB_ID.NULL
-   Public ReadOnly Property nOriginalPartLayerId As Integer
-      Get
-         Return m_nOriginalPartLayerId
+         Return EgtGetFirstInGroup(m_nPrintSolidLayerId)
       End Get
    End Property
 
@@ -79,7 +72,21 @@ Public Class Print3dPartVM
       End Get
    End Property
 
-   Private m_sImportedFileName As String
+   ' gruppo others
+   Private m_nOthersLayerId As Integer = GDB_ID.NULL
+   Public ReadOnly Property nOthersLayerId As Integer
+      Get
+         Return m_nOthersLayerId
+      End Get
+   End Property
+
+   Private m_sName As String
+   Public ReadOnly Property sName As String
+      Get
+         Return m_sName
+      End Get
+   End Property
+
    Public ReadOnly Property sImportedFileName As String
       Get
          Return If(Not String.IsNullOrWhiteSpace(m_sImportedFilePath), IO.Path.GetFileName(m_sImportedFilePath), "")
@@ -111,22 +118,24 @@ Public Class Print3dPartVM
 
    Sub New(nPartId As Integer, sImportedFilePath As String)
       m_nPartId = nPartId
+      m_sName = IO.Path.GetFileName(sImportedFilePath)
       m_sImportedFilePath = sImportedFilePath
-      m_sImportedFileName = IO.Path.GetFileName(m_sImportedFilePath)
    End Sub
 
-   Sub New(nPartId As Integer, nPrintSolidLayerId As Integer, nPrintSolidId As Integer, nOriginalPartLayerId As Integer, nReferenceLayerId As Integer, nReferenceId As Integer, nMachStartLayerId As Integer,
-           nRibsLayerId As Integer, nShellNumberLayerId As Integer, nAuxSolidsLayerId As Integer, sImportedFilePath As String)
+   Sub New(nPartId As Integer, nPrintSolidLayerId As Integer, nReferenceLayerId As Integer, nReferenceId As Integer, nMachStartLayerId As Integer,
+           nRibsLayerId As Integer, nShellNumberLayerId As Integer, nAuxSolidsLayerId As Integer, nOthersLayerId As Integer, sImportedFilePath As String)
       m_nPartId = nPartId
       m_nPrintSolidLayerId = nPrintSolidLayerId
-      m_nPrintSolidId = nPrintSolidId
-      m_nOriginalPartLayerId = nOriginalPartLayerId
       m_nReferenceLayerId = nReferenceLayerId
       m_nReferenceId = nReferenceId
       m_nMachStartLayerId = nMachStartLayerId
       m_nAuxSolidsLayerId = nAuxSolidsLayerId
       m_nRibsLayerId = nRibsLayerId
       m_nShellNumberLayerId = nShellNumberLayerId
+      m_nOthersLayerId = nOthersLayerId
+      If Not EgtGetInfo(nPartId, PART_NAME, m_sName) Then
+         m_sName = IO.Path.GetFileName(sImportedFilePath)
+      End If
       m_sImportedFilePath = sImportedFilePath
       RefreshPrintLayers()
    End Sub
@@ -152,6 +161,11 @@ Public Class Print3dPartVM
       m_nReferenceId = nNewReferenceId
    End Sub
 
+   Friend Sub UpdateName(Name As String)
+      m_sName = Name
+      NotifyPropertyChanged(NameOf(sName))
+   End Sub
+
 #End Region    ' METHODS
 
 End Class