- Evitato contextmenu vuoto

- Migliorata gestione nuovo pezzo
- Correzioni e migliorie

Icarus/Constants/Const3dPrint.vb

@@ -3,7 +3,6 @@
    Public Const TABLE = "Table"
    Public Const TABLE_OUTLINE = "TableOutline"
    Public Const PART = "Part"
-   Public Const ORIGINAL_SOLID = "OriginalSolid"
    Public Const PRINT_SOLID = "PrintSolid"
    Public Const LAY_MACH_START = "MachStart"
    Public Const LAY_REFERENCE = "Frame"
@@ -90,13 +89,14 @@
    Public Const MAC_LEADOUTTANGDIST = "LeadOutTangDist"
    Public Const MAC_LEADOUTORTHODIST = "LeadOutOrthoDist"
    Public Const MAC_COASTINGLEN = "CoastingLen"
-   Public Const MAC_COASTINGFEED = "CoastingFeed"
+   Public Const MAC_COASTINGFEEDPU = "CoastingFeedPu"
    Public Const MAC_WIPELEN = "WipeLen"
    Public Const MAC_WIPEFEEDPU = "WipeFeedPu"
    Public Const MAC_WIPEDIR = "WipeDir"
    Public Const MAC_FLOORCOUNT = "FloorCount"
    Public Const MAC_G0FEED = "G0Feed"
    Public Const MAC_TOOLDIAM = "ToolDiam"
+   Public Const MAC_RIBSTYPE = "RibsType"
    Public Const MAC_RIBSOVERLAP = "RibsOverlap"
    Public Const MAC_RIBSSTRANDCOUNT = "RibsStrandCount"
    Public Const MAC_RIBSLINK = "RibsLink"
@@ -150,5 +150,7 @@
    Public Const KEY_ISOFILE_PATH = "IsoFilePath"
 
    Public Const FILE_PATH = "FilePath"
+   Public Const PART_NAME = "PartName"
+   Public Const ENTITY_NAME = "EntityName"
 
 End Module

Icarus/Constants/ConstIni.vb

@@ -42,6 +42,7 @@ Public Module ConstIni
    Public Const K_MOD_AUXSOLIDS As String = "ModAuxSolids"
    Public Const K_MOD_SOLIDSLICE As String = "ModSolidSlice"
    Public Const K_MOD_SLICETOOLPATH As String = "ModSliceToolPath"
+   Public Const K_MOD_OTHERS As String = "ModOthers"
    Public Const K_SLC_PRINTSOLID As String = "SlcPrintSolid"
    Public Const K_SLC_REFERENCE As String = "SlcReference"
    Public Const K_SLC_STARTMACHINING As String = "SlcStartMAchining"
@@ -50,6 +51,7 @@ Public Module ConstIni
    Public Const K_SLC_AUXSOLIDS As String = "SlcAuxSolids"
    Public Const K_SLC_SOLIDSLICE As String = "SlcSolidSlice"
    Public Const K_SLC_SLICETOOLPATH As String = "SlcSliceToolPath"
+   Public Const K_SLC_OTHERS As String = "SlcOthers"
 
    'Public Const S_LUA As String = "Lua"
    'Public Const K_LIBSDIR As String = "LibsDir"
@@ -109,6 +111,7 @@ Public Module ConstIni
    Public Const K_CURRMATERIAL As String = "CurrMaterial"
    Public Const K_CURRMACHINING As String = "CurrMachining"
    Public Const K_VIEWSLIDER As String = "ViewSlider"
+   Public Const K_IMPORTCURREXTENSION As String = "ImportCurrExtension"
 
    Public Const S_MRUFILES As String = "MruFiles"
    Public Const S_MRUIMPORTFILES As String = "MruImportFiles"

Icarus/CurrMachiningPanel/CurrMachining.vb

@@ -195,7 +195,7 @@ Public Class CurrMachiningCathegory
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.G0FEED, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.TOOLDIAM, nPartId, nIndex, bForceFromDb),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.CONSTANT, nPartId, nIndex, bForceFromDb)})
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.FLOWRATE_PC, nPartId, nIndex, bForceFromDb)})
          Case Cathegories.LINK
             m_sName = "Shell"
             m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.LINKTYPE, nPartId, nIndex, bForceFromDb),
@@ -209,13 +209,14 @@ Public Class CurrMachiningCathegory
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.LEADOUTTANGDIST, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.LEADOUTORTHODIST, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.COASTINGLEN, nPartId, nIndex, bForceFromDb),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.COASTINGFEED, nPartId, nIndex, bForceFromDb),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.COASTINGFEED_PC, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.WIPELEN, nPartId, nIndex, bForceFromDb),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.WIPEFEEDPU, nPartId, nIndex, bForceFromDb),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.WIPEFEED_PC, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.WIPEDIR, nPartId, nIndex, bForceFromDb)})
          Case Cathegories.RIBS
             m_sName = "Ribs"
-            m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nPartId, nIndex, bForceFromDb),
+            m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.RIBSTYPE, nPartId, nIndex, bForceFromDb),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nPartId, nIndex, bForceFromDb),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.RIBSSTRANDCOUNT, nPartId, nIndex, bForceFromDb),
                                                                 New CurrCheckMachiningParam(MachiningParam.Params.RIBSLINK, nPartId, nIndex, bForceFromDb),
                                                                 New CurrCheckMachiningParam(MachiningParam.Params.RIBSINVERTORDER, nPartId, nIndex, bForceFromDb),
@@ -272,13 +273,13 @@ Public Class CurrNumericMachiningParam
 
    Public Overrides Property sValue As String
       Get
-         Return If(m_bIsLen, LenToString(m_dValue, 1), m_dValue)
+         Return If(m_bIsLen, LenToString(m_dValue, 1), DoubleToString( m_dValue, 2))
       End Get
       Set(value As String)
          If m_bIsLen Then
             StringToLen(value, m_dValue)
          Else
-            m_dValue = value
+            StringToDouble( value, m_dValue)
          End If
          NotifyPropertyChanged(NameOf(sValue))
          NotifyPropertyChanged(NameOf(bIsModifiedFromDb))
@@ -347,15 +348,15 @@ Public Class CurrNumericMachiningParam
          Case Params.COASTINGLEN
             bReadFromPart = EgtGetInfo(nPartId, MAC_COASTINGLEN, m_dValue)
             m_bIsLen = True
-         Case Params.COASTINGFEED
-            bReadFromPart = EgtGetInfo(nPartId, MAC_COASTINGFEED, m_dValue)
-            m_bIsLen = True
+         Case Params.COASTINGFEED_PC
+            bReadFromPart = EgtGetInfo(nPartId, MAC_COASTINGFEEDPU, m_dValue)
+            m_bIsLen = False
          Case Params.WIPELEN
             bReadFromPart = EgtGetInfo(nPartId, MAC_WIPELEN, m_dValue)
             m_bIsLen = True
-         Case Params.WIPEFEEDPU
+         Case Params.WIPEFEED_PC
             bReadFromPart = EgtGetInfo(nPartId, MAC_WIPEFEEDPU, m_dValue)
-            m_bIsLen = True
+            m_bIsLen = False
          Case Params.WIPEDIR
             bReadFromPart = EgtGetInfo(nPartId, MAC_WIPEDIR, m_dValue)
             m_bIsLen = True
@@ -419,7 +420,7 @@ Public Class CurrNumericMachiningParam
          Case Params.AUXSOLIDSWIPEDIR
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSWIPEDIR, m_dValue)
             m_bIsLen = True
-         Case Params.CONSTANT
+         Case Params.FLOWRATE_PC
             bReadFromPart = EgtGetInfo(nPartId, MAC_CONSTANT, m_dValue)
             m_bIsLen = False
       End Select
@@ -427,24 +428,28 @@ Public Class CurrNumericMachiningParam
       If nIndex > 0 Then
          Dim DbMachining As Machining = Map.refMachiningDbVM.MachiningList.FirstOrDefault(Function(x) x.nIndex = nIndex)
          Select Case Type
-            Case Params.STRANDH, Params.STRANDW, Params.STRANDCOUNT, Params.OFFSET, Params.STRANDOVERLAP, Params.STARTPOINTOFFSETONSLICE, Params.FLOORCOUNT, Params.G0FEED, Params.TOOLDIAM, Params.CONSTANT
+            Case Params.STRANDH, Params.STRANDW, Params.STRANDCOUNT, Params.OFFSET, Params.STRANDOVERLAP, Params.STARTPOINTOFFSETONSLICE,
+                 Params.FLOORCOUNT, Params.G0FEED, Params.TOOLDIAM, Params.FLOWRATE_PC
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.LINKPARAM, Params.LINKZUP, Params.OFFSETLEADPOINT, Params.LEADINTANGDIST, Params.LEADINORTHODIST,
-                 Params.LEADOUTTANGDIST, Params.LEADOUTORTHODIST, Params.COASTINGLEN, Params.COASTINGFEED, Params.WIPELEN, Params.WIPEFEEDPU, Params.WIPEDIR
+                 Params.LEADOUTTANGDIST, Params.LEADOUTORTHODIST, Params.COASTINGLEN, Params.COASTINGFEED_PC,
+                 Params.WIPELEN, Params.WIPEFEED_PC, Params.WIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.LINK).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            Case Params.RIBSOVERLAP, Params.RIBSSTRANDCOUNT, Params.RIBSLINK, Params.RIBSINVERTORDER, Params.RIBSINVERTDIRECTION, Params.RIBSLEADININVERT,
-               Params.RIBSLEADINLEN, Params.RIBSLEADOUTINVERT, Params.RIBSLEADOUTLEN, Params.RIBSLEADOUTCOASTING, Params.RIBSLEADOUTWIPE, Params.RIBSLEADOUTWIPEDIR
+            Case Params.RIBSOVERLAP, Params.RIBSSTRANDCOUNT, Params.RIBSLINK, Params.RIBSINVERTORDER, Params.RIBSINVERTDIRECTION,
+                 Params.RIBSLEADININVERT, Params.RIBSLEADINLEN, Params.RIBSLEADOUTINVERT, Params.RIBSLEADOUTLEN, Params.RIBSLEADOUTCOASTING,
+                 Params.RIBSLEADOUTWIPE, Params.RIBSLEADOUTWIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.RIBS).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.SHELLNBRDIFFERENCE, Params.SHELLNBRCOASTING, Params.SHELLNBRWIPE, Params.SHELLNBRWIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.SHELL_NUMBER).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            Case Params.AUXSOLIDSOVERLAP, Params.AUXSOLIDSLINKPARAM, Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE, Params.AUXSOLIDSCOASTINGLEN, Params.AUXSOLIDSWIPELEN, Params.AUXSOLIDSWIPEDIR
+            Case Params.AUXSOLIDSOVERLAP, Params.AUXSOLIDSLINKPARAM, Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE,
+                 Params.AUXSOLIDSCOASTINGLEN, Params.AUXSOLIDSWIPELEN, Params.AUXSOLIDSWIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
          If bForceFromDb OrElse Not bReadFromPart Then
             m_dValue = m_DbParam.dOrigValue
             m_dOrigValue = m_DbParam.dOrigValue
          End If
-      ElseIf Type = Params.CONSTANT AndAlso Not bReadFromPart Then
+      ElseIf Type = Params.FLOWRATE_PC AndAlso Not bReadFromPart Then
          m_dValue = 100
          m_dOrigValue = 100
       End If
@@ -486,11 +491,11 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_LEADOUTORTHODIST, sWriteValue)
          Case Params.COASTINGLEN
             EgtSetInfo(nPartId, MAC_COASTINGLEN, sWriteValue)
-         Case Params.COASTINGFEED
-            EgtSetInfo(nPartId, MAC_COASTINGFEED, sWriteValue)
+         Case Params.COASTINGFEED_PC
+            EgtSetInfo(nPartId, MAC_COASTINGFEEDPU, sWriteValue)
          Case Params.WIPELEN
             EgtSetInfo(nPartId, MAC_WIPELEN, sWriteValue)
-         Case Params.WIPEFEEDPU
+         Case Params.WIPEFEED_PC
             EgtSetInfo(nPartId, MAC_WIPEFEEDPU, sWriteValue)
          Case Params.WIPEDIR
             EgtSetInfo(nPartId, MAC_WIPEDIR, sWriteValue)
@@ -534,7 +539,7 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_AUXSOLIDSWIPELEN, sWriteValue)
          Case Params.AUXSOLIDSWIPEDIR
             EgtSetInfo(nPartId, MAC_AUXSOLIDSWIPEDIR, sWriteValue)
-         Case Params.CONSTANT
+         Case Params.FLOWRATE_PC
             EgtSetInfo(nPartId, MAC_CONSTANT, sWriteValue)
       End Select
    End Sub
@@ -674,9 +679,9 @@ Public Class CurrComboMachiningParam
          Case Params.SLICINGTYPE
             Dim nHorizontalPrint As Integer = GetPrivateProfileInt(S_MACH_PRINTING3D, K_HORIZONTAL_PRINT, 0, CurrentMachine.sMachIniFile)
             m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_SLICINGTYPE.VERTICAL, "Vertical"),
-                                                     New IdNameStruct(Machining.MPAR_SLICINGTYPE.HORIZONTAL, "Horizontal")})
+                                                     New IdNameStruct(Machining.MPAR_SLICINGTYPE.DEG45, "45°")})
             If nHorizontalPrint > 0 Then
-               m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.DEG45, "45°"))
+               m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.HORIZONTAL, "Horizontal"))
             End If
             Dim nSelValue As Integer = 0
             bReadFromPart = EgtGetInfo(nPartId, MAC_SLICINGTYPE, nSelValue)
@@ -719,6 +724,13 @@ Public Class CurrComboMachiningParam
             Dim nSelValue As Integer = 0
             bReadFromPart = EgtGetInfo(nPartId, MAC_LEADOUT, nSelValue)
             m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+         Case Params.RIBSTYPE
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_RIBSTYPE.INTERNAL, "Internal"),
+                                                     New IdNameStruct(Machining.MPAR_RIBSTYPE.EXTERNAL, "External"),
+                                                     New IdNameStruct(Machining.MPAR_RIBSTYPE.UNBOUNDED, "Unbounded")})
+            Dim nSelValue As Integer = 0
+            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSTYPE, nSelValue)
+            m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
          Case Params.AUXSOLIDSINFILL
             m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL.NONE, "None"),
                                                      New IdNameStruct(Machining.MPAR_INFILL.OFFSET, "Offset"),
@@ -748,6 +760,8 @@ Public Class CurrComboMachiningParam
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.LINKTYPE, Params.LEADIN, Params.LEADOUT
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.LINK).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.RIBSTYPE
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.RIBS).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.AUXSOLIDSINFILL, Params.AUXSOLIDSSTRANDORDER, Params.AUXSOLIDSLINKTYPE
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
@@ -755,6 +769,9 @@ Public Class CurrComboMachiningParam
             m_SelValue = m_DbParam.OrigSelValue
             m_OrigSelValue = m_DbParam.OrigSelValue
          End If
+      ElseIf Type = Params.RIBSTYPE AndAlso Not bReadFromPart Then
+         m_OrigSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = Machining.MPAR_RIBSTYPE.INTERNAL)
+         m_SelValue = m_OrigSelValue
       End If
    End Sub
 
@@ -772,6 +789,8 @@ Public Class CurrComboMachiningParam
             EgtSetInfo(nPartId, MAC_LEADIN, m_SelValue.Id)
          Case Params.LEADOUT
             EgtSetInfo(nPartId, MAC_LEADOUT, m_SelValue.Id)
+         Case Params.RIBSTYPE
+            EgtSetInfo(nPartId, MAC_RIBSTYPE, m_SelValue.Id)
          Case Params.AUXSOLIDSINFILL
             EgtSetInfo(nPartId, MAC_AUXSOLIDSINFILL, m_SelValue.Id)
          Case Params.AUXSOLIDSSTRANDORDER

Icarus/Icarus.vbproj

@@ -123,11 +123,6 @@
       <DependentUpon>DispositionPanelV.xaml</DependentUpon>
     </Compile>
     <Compile Include="DispositionPanel\DispositionPanelVM.vb" />
-    <Compile Include="ImportPanel\ImportPanelV.xaml.vb">
-      <DependentUpon>ImportPanelV.xaml</DependentUpon>
-    </Compile>
-    <Compile Include="ImportPanel\ImportPanelVM.vb" />
-    <Compile Include="ImportPanel\ImportUtility.vb" />
     <Compile Include="InstrumentPanel\InstrumentPanelV.xaml.vb">
       <DependentUpon>InstrumentPanelV.xaml</DependentUpon>
     </Compile>
@@ -154,16 +149,16 @@
       <DependentUpon>MachSaveInDbWindowV.xaml</DependentUpon>
     </Compile>
     <Compile Include="MachSaveInDbWnd\MachSaveInDbWndVM.vb" />
+    <Compile Include="ManagePartPanel\ManagePartPanelV.xaml.vb">
+      <DependentUpon>ManagePartPanelV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="ManagePartPanel\ManagePartPanelVM.vb" />
+    <Compile Include="ManagePartPanel\ManagePartUtility.vb" />
     <Compile Include="MaterialDb\Material.vb" />
     <Compile Include="MaterialDb\MaterialDbV.xaml.vb">
       <DependentUpon>MaterialDbV.xaml</DependentUpon>
     </Compile>
     <Compile Include="MaterialDb\MaterialDbVM.vb" />
-    <Compile Include="ModifyPartPanel\ModifyPartPanelV.xaml.vb">
-      <DependentUpon>ModifyPartPanelV.xaml</DependentUpon>
-    </Compile>
-    <Compile Include="ModifyPartPanel\ModifyPartPanelVM.vb" />
-    <Compile Include="ModifyPartPanel\ModifyPartUtility.vb" />
     <Compile Include="OptionsWindow\MachineBox.xaml.vb">
       <DependentUpon>MachineBox.xaml</DependentUpon>
     </Compile>
@@ -304,10 +299,6 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
-    <Page Include="ImportPanel\ImportPanelV.xaml">
-      <SubType>Designer</SubType>
-      <Generator>MSBuild:Compile</Generator>
-    </Page>
     <Page Include="InstrumentPanel\InstrumentPanelV.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -348,14 +339,14 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="ManagePartPanel\ManagePartPanelV.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </Page>
     <Page Include="MaterialDb\MaterialDbV.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
-    <Page Include="ModifyPartPanel\ModifyPartPanelV.xaml">
-      <Generator>MSBuild:Compile</Generator>
-      <SubType>Designer</SubType>
-    </Page>
     <Page Include="OptionsWindow\MachineBox.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>

Icarus/LeftPanel/LeftPanelV.xaml

@@ -15,7 +15,8 @@
       <TabItem Header="NULL">
       </TabItem>
       <TabItem Header="IMPORT">
-         <PrintApp:ImportPanelV DataContext="{StaticResource ImportPanelVM}"/>
+         <!--<PrintApp:ImportPanelV DataContext="{StaticResource ImportPanelVM}"/>-->
+         <PrintApp:ManagePartPanelV DataContext="{StaticResource ManagePartPanelVM}"/>
       </TabItem>
       <TabItem Header="DISPOSITION">
          <PrintApp:DispositionPanelV DataContext="{StaticResource DispositionPanelVM}"/>
@@ -36,7 +37,8 @@
          <Button Height="100"/>
       </TabItem>
       <TabItem Header="MODIFYPART">
-         <PrintApp:ModifyPartPanelV DataContext="{StaticResource ModifyPartPanelVM}"/>
+         <!--<PrintApp:ModifyPartPanelV DataContext="{StaticResource ModifyPartPanelVM}"/>-->
+         <PrintApp:ManagePartPanelV DataContext="{StaticResource ManagePartPanelVM}"/>
       </TabItem>
    </TabControl>
    

Icarus/LeftPanel/LeftPanelVM.vb

@@ -55,7 +55,8 @@ Public Class LeftPanelVM
          Case Panels.SHELLNUMBER
             Map.refShellNumberPanelVM.Init()
          Case Panels.MODIFYPART
-            Map.refModifyPartPanelVM.Init()
+            ''Map.refModifyPartPanelVM.Init()
+            Map.refManagePartPanelVM.Init(ManagePartPanelVM.ManagePartType.MODIFY)
       End Select
       Map.refViewLayerManagerVM.UpdateForced()
       NotifyPropertyChanged(NameOf(SelPanel))

Icarus/MachiningDb/Machining.vb

@@ -8,8 +8,8 @@ Public Class Machining
 
    Public Enum MPAR_SLICINGTYPE As Integer
       VERTICAL = 1
-      HORIZONTAL = 2
-      DEG45 = 3
+      DEG45 = 2
+      HORIZONTAL = 3
    End Enum
 
    Public Enum MPAR_STRANDORDERS As Integer
@@ -34,6 +34,12 @@ Public Class Machining
       ARC = 3
    End Enum
 
+   Public Enum MPAR_RIBSTYPE As Integer
+      INTERNAL = 1
+      EXTERNAL = 2
+      UNBOUNDED = 3
+   End Enum
+
    Public Enum MPAR_INFILL As Integer
       NONE = 1
       OFFSET = 2
@@ -298,7 +304,7 @@ Public Class MachiningCathegory
                                                                 New NumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.G0FEED, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.TOOLDIAM, nIndex),
-                                                                New NumericMachiningParam(MachiningParam.Params.CONSTANT, nIndex)})
+                                                                New NumericMachiningParam(MachiningParam.Params.FLOWRATE_PC, nIndex)})
          Case Cathegories.LINK
             m_sName = "Shell"
             m_MachiningParamList = New List(Of MachiningParam)({New ComboMachiningParam(MachiningParam.Params.LINKTYPE, nIndex),
@@ -312,13 +318,14 @@ Public Class MachiningCathegory
                                                                 New NumericMachiningParam(MachiningParam.Params.LEADOUTTANGDIST, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.LEADOUTORTHODIST, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.COASTINGLEN, nIndex),
-                                                                New NumericMachiningParam(MachiningParam.Params.COASTINGFEED, nIndex),
+                                                                New NumericMachiningParam(MachiningParam.Params.COASTINGFEED_PC, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.WIPELEN, nIndex),
-                                                                New NumericMachiningParam(MachiningParam.Params.WIPEFEEDPU, nIndex),
+                                                                New NumericMachiningParam(MachiningParam.Params.WIPEFEED_PC, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.WIPEDIR, nIndex)})
          Case Cathegories.RIBS
             m_sName = "Ribs"
-            m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nIndex),
+            m_MachiningParamList = New List(Of MachiningParam)({New ComboMachiningParam(MachiningParam.Params.RIBSTYPE, nIndex),
+                                                                New NumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nIndex),
                                                                 New NumericMachiningParam(MachiningParam.Params.RIBSSTRANDCOUNT, nIndex),
                                                                 New CheckMachiningParam(MachiningParam.Params.RIBSLINK, nIndex),
                                                                 New CheckMachiningParam(MachiningParam.Params.RIBSINVERTORDER, nIndex),
@@ -406,41 +413,42 @@ Public MustInherit Class MachiningParam
       LEADOUTTANGDIST = 19
       LEADOUTORTHODIST = 20
       COASTINGLEN = 21
-      COASTINGFEED = 22
+      COASTINGFEED_PC = 22
       WIPELEN = 23
-      WIPEFEEDPU = 24
+      WIPEFEED_PC = 24
       FLOORCOUNT = 25
       G0FEED = 26
       TOOLDIAM = 27
-      RIBSOVERLAP = 28
-      RIBSSTRANDCOUNT = 29
-      RIBSLINK = 30
-      RIBSINVERTORDER = 31
-      RIBSINVERTDIRECTION = 32
-      RIBSLEADININVERT = 33
-      RIBSLEADINLEN = 34
-      RIBSLEADOUTINVERT = 35
-      RIBSLEADOUTLEN = 36
-      RIBSLEADOUTCOASTING = 37
-      RIBSLEADOUTWIPE = 38
-      RIBSLEADOUTWIPEDIR = 39
-      SHELLNBRDIFFERENCE = 40
-      SHELLNBRCOASTING = 41
-      SHELLNBRWIPE = 42
-      SHELLNBRWIPEDIR = 43
-      AUXSOLIDSOVERLAP = 44
-      AUXSOLIDSINFILL = 45
-      AUXSOLIDSSTRANDORDER = 46
-      AUXSOLIDSLINKTYPE = 47
-      AUXSOLIDSLINKPARAM = 48
-      AUXSOLIDSSTARTPOINTOFFSETONSLICE = 49
-      AUXSOLIDSCOASTINGLEN = 50
-      AUXSOLIDSWIPELEN = 51
-      AUXSOLIDSWIPEDIR = 52
-      SPIRALVASE = 53
-      WIPEDIR = 54
-      STRANDOVERLAP = 55
-      CONSTANT = 56
+      RIBSTYPE = 28
+      RIBSOVERLAP = 29
+      RIBSSTRANDCOUNT = 30
+      RIBSLINK = 31
+      RIBSINVERTORDER = 32
+      RIBSINVERTDIRECTION = 33
+      RIBSLEADININVERT = 34
+      RIBSLEADINLEN = 35
+      RIBSLEADOUTINVERT = 36
+      RIBSLEADOUTLEN = 37
+      RIBSLEADOUTCOASTING = 38
+      RIBSLEADOUTWIPE = 39
+      RIBSLEADOUTWIPEDIR = 40
+      SHELLNBRDIFFERENCE = 41
+      SHELLNBRCOASTING = 42
+      SHELLNBRWIPE = 43
+      SHELLNBRWIPEDIR = 44
+      AUXSOLIDSOVERLAP = 45
+      AUXSOLIDSINFILL = 46
+      AUXSOLIDSSTRANDORDER = 47
+      AUXSOLIDSLINKTYPE = 48
+      AUXSOLIDSLINKPARAM = 49
+      AUXSOLIDSSTARTPOINTOFFSETONSLICE = 50
+      AUXSOLIDSCOASTINGLEN = 51
+      AUXSOLIDSWIPELEN = 52
+      AUXSOLIDSWIPEDIR = 53
+      SPIRALVASE = 54
+      WIPEDIR = 55
+      STRANDOVERLAP = 56
+      FLOWRATE_PC = 57
       MATERIALS = 100
    End Enum
 
@@ -501,20 +509,22 @@ Public MustInherit Class MachiningParam
             m_sName = "Lead Out Ortho Dist"
          Case Params.COASTINGLEN
             m_sName = "Coasting Len"
-         Case Params.COASTINGFEED
-            m_sName = "Coasting Feed"
+         Case Params.COASTINGFEED_PC
+            m_sName = "Coasting Feed [%]"
          Case Params.WIPELEN
             m_sName = "Wipe Len"
-         Case Params.WIPEFEEDPU
-            m_sName = "Wipe Feed Pu"
+         Case Params.WIPEFEED_PC
+            m_sName = "Wipe Feed [%]"
          Case Params.FLOORCOUNT
             m_sName = "Floor Count"
          Case Params.G0FEED
             m_sName = "G0 Feed"
          Case Params.TOOLDIAM
             m_sName = "Nozzle Diameter"
+         Case Params.RIBSTYPE
+            m_sName = "Type"
          Case Params.RIBSOVERLAP
-            m_sName = "Overlap"
+            m_sName = "Overlap [%]"
          Case Params.RIBSSTRANDCOUNT
             m_sName = "Strand Count"
          Case Params.RIBSLINK
@@ -536,7 +546,7 @@ Public MustInherit Class MachiningParam
          Case Params.RIBSLEADOUTWIPE
             m_sName = "Lead Out Wipe"
          Case Params.RIBSLEADOUTWIPEDIR
-            m_sName = "Lead Out Wipe Dir"
+            m_sName = "Lead Out Wipe Dir [deg]"
          Case Params.SHELLNBRDIFFERENCE
             m_sName = "Difference"
          Case Params.SHELLNBRCOASTING
@@ -544,9 +554,9 @@ Public MustInherit Class MachiningParam
          Case Params.SHELLNBRWIPE
             m_sName = "Wipe"
          Case Params.SHELLNBRWIPEDIR
-            m_sName = "Wipe Direction"
+            m_sName = "Wipe Direction [deg]"
          Case Params.AUXSOLIDSOVERLAP
-            m_sName = "Overlap"
+            m_sName = "Overlap [%]"
          Case Params.AUXSOLIDSINFILL
             m_sName = "Infill"
          Case Params.AUXSOLIDSSTRANDORDER
@@ -562,15 +572,15 @@ Public MustInherit Class MachiningParam
          Case Params.AUXSOLIDSWIPELEN
             m_sName = "Wipe Length"
          Case Params.AUXSOLIDSWIPEDIR
-            m_sName = "Wipe Direction"
+            m_sName = "Wipe Direction [deg]"
          Case Params.SPIRALVASE
             m_sName = "Spiral Vase"
          Case Params.WIPEDIR
-            m_sName = "Wipe Direction"
+            m_sName = "Wipe Direction [deg]"
          Case Params.STRANDOVERLAP
-            m_sName = "Strand Overlap"
-         Case Params.CONSTANT
-            m_sName = "Constant"
+            m_sName = "Strand Overlap [%]"
+         Case Params.FLOWRATE_PC
+            m_sName = "Flow rate [%]"
       End Select
    End Sub
 
@@ -600,13 +610,13 @@ Public Class NumericMachiningParam
    End Property
    Public Overridable Property sValue As String
       Get
-         Return If(m_bIsLen, LenToString(m_dValue, 1), m_dValue)
+         Return If(m_bIsLen, LenToString(m_dValue, 1), DoubleToString( m_dValue, 2))
       End Get
       Set(value As String)
          If m_bIsLen Then
             StringToLen(value, m_dValue)
          Else
-            m_dValue = value
+            StringToDouble( value, m_dValue)
          End If
          NotifyPropertyChanged(NameOf(sValue))
       End Set
@@ -678,21 +688,21 @@ Public Class NumericMachiningParam
             Case Params.COASTINGLEN
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_COASTINGLEN, 0)
                m_bIsLen = True
-            Case Params.COASTINGFEED
-               m_dValue = ReadMachiningParamDouble(nIndex, MAC_COASTINGFEED, 0)
-               m_bIsLen = True
+            Case Params.COASTINGFEED_PC
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_COASTINGFEEDPU, 0)
+               m_bIsLen = False
             Case Params.WIPELEN
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_WIPELEN, 0)
                m_bIsLen = True
-            Case Params.WIPEFEEDPU
+            Case Params.WIPEFEED_PC
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_WIPEFEEDPU, 0)
-               m_bIsLen = True
+               m_bIsLen = False
             Case Params.WIPEDIR
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_WIPEDIR, 0)
                m_bIsLen = True
             Case Params.FLOORCOUNT
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_FLOORCOUNT, 0)
-               m_bIsLen = True
+               m_bIsLen = False
             Case Params.G0FEED
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_G0FEED, 0)
                m_bIsLen = True
@@ -750,7 +760,7 @@ Public Class NumericMachiningParam
             Case Params.AUXSOLIDSWIPEDIR
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSWIPEDIR, 0)
                m_bIsLen = True
-            Case Params.CONSTANT
+            Case Params.FLOWRATE_PC
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_CONSTANT, 100)
                m_bIsLen = False
          End Select
@@ -794,11 +804,11 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_LEADOUTORTHODIST, sWriteValue)
          Case Params.COASTINGLEN
             WriteMachiningParam(nIndex, MAC_COASTINGLEN, sWriteValue)
-         Case Params.COASTINGFEED
-            WriteMachiningParam(nIndex, MAC_COASTINGFEED, sWriteValue)
+         Case Params.COASTINGFEED_PC
+            WriteMachiningParam(nIndex, MAC_COASTINGFEEDPU, sWriteValue)
          Case Params.WIPELEN
             WriteMachiningParam(nIndex, MAC_WIPELEN, sWriteValue)
-         Case Params.WIPEFEEDPU
+         Case Params.WIPEFEED_PC
             WriteMachiningParam(nIndex, MAC_WIPEFEEDPU, sWriteValue)
          Case Params.WIPEDIR
             WriteMachiningParam(nIndex, MAC_WIPEDIR, sWriteValue)
@@ -842,7 +852,7 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSWIPELEN, sWriteValue)
          Case Params.AUXSOLIDSWIPEDIR
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSWIPEDIR, sWriteValue)
-         Case Params.CONSTANT
+         Case Params.FLOWRATE_PC
             WriteMachiningParam(nIndex, MAC_CONSTANT, sWriteValue)
       End Select
    End Sub
@@ -943,6 +953,10 @@ Public Class ComboMachiningParam
       End Get
    End Property
 
+   Sub New(Type As Params)
+      MyBase.New(Type)
+   End Sub
+
    Sub New(Type As Params, nIndex As Integer)
       MyBase.New(Type)
       If nIndex = 0 Then
@@ -953,9 +967,9 @@ Public Class ComboMachiningParam
             Case Params.SLICINGTYPE
                Dim nHorizontalPrint As Integer = GetPrivateProfileInt(S_MACH_PRINTING3D, K_HORIZONTAL_PRINT, 0, CurrentMachine.sMachIniFile)
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_SLICINGTYPE.VERTICAL, "Vertical"),
-                                                     New IdNameStruct(Machining.MPAR_SLICINGTYPE.HORIZONTAL, "Horizontal")})
+                                                        New IdNameStruct(Machining.MPAR_SLICINGTYPE.DEG45, "45°")})
                If nHorizontalPrint > 0 Then
-                  m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.DEG45, "45°"))
+                  m_ValueList.Add(New IdNameStruct(Machining.MPAR_SLICINGTYPE.HORIZONTAL, "Horizontal"))
                End If
                Dim nSelValue As Double = ReadMachiningParamDouble(nIndex, MAC_SLICINGTYPE, -1)
                If nSelValue = -1 Then
@@ -987,6 +1001,11 @@ Public Class ComboMachiningParam
                                                      New IdNameStruct(Machining.MPAR_LEADINOUT.LINEAR, "Linear"),
                                                      New IdNameStruct(Machining.MPAR_LEADINOUT.ARC, "Arc")})
                m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADOUT, 0))
+            Case Params.RIBSTYPE
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_RIBSTYPE.INTERNAL, "Internal"),
+                                                     New IdNameStruct(Machining.MPAR_RIBSTYPE.EXTERNAL, "External"),
+                                                     New IdNameStruct(Machining.MPAR_RIBSTYPE.UNBOUNDED, "Unbounded")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_RIBSTYPE, 1))
             Case Params.AUXSOLIDSINFILL
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL.NONE, "None"),
                                                      New IdNameStruct(Machining.MPAR_INFILL.OFFSET, "Offset"),
@@ -1009,7 +1028,7 @@ Public Class ComboMachiningParam
    Friend Overrides Sub WriteParamOnDb(nIndex As Integer)
       Select Case Type
          Case Params.SLICINGTYPE
-            WriteMachiningParam(nIndex, MAC_SLICING45, m_SelValue.Id)
+            WriteMachiningParam(nIndex, MAC_SLICINGTYPE, m_SelValue.Id)
          Case Params.STRANDORDER
             WriteMachiningParam(nIndex, MAC_STRANDORDER, m_SelValue.Id)
          Case Params.DIRECTION
@@ -1020,6 +1039,8 @@ Public Class ComboMachiningParam
             WriteMachiningParam(nIndex, MAC_LEADIN, m_SelValue.Id)
          Case Params.LEADOUT
             WriteMachiningParam(nIndex, MAC_LEADOUT, m_SelValue.Id)
+         Case Params.RIBSTYPE
+            WriteMachiningParam(nIndex, MAC_RIBSTYPE, m_SelValue.Id)
          Case Params.AUXSOLIDSINFILL
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSINFILL, m_SelValue.Id)
          Case Params.AUXSOLIDSSTRANDORDER
@@ -1067,6 +1088,10 @@ Public Class CheckMachiningParam
       End Get
    End Property
 
+   Sub New(Type As Params)
+      MyBase.New(Type)
+   End Sub
+
    Sub New(Type As Params, nIndex As Integer)
       MyBase.New(Type)
       If nIndex = 0 Then

Icarus/MainWindow/MainWindowV.xaml.vb

@@ -19,6 +19,7 @@ Class MainWindowV
       AddHandler Me.ContentRendered, AddressOf MainWindowV_ContentRendered
       AddHandler Me.Closing, AddressOf MainWindowV_Closing
       AddHandler Me.KeyDown, AddressOf MainWindowV_KeyDown
+      AddHandler Me.StateChanged, AddressOf MainWindowV_StateChanged
    End Sub
 
 #End Region    ' CONSTRUCTOR
@@ -63,6 +64,14 @@ Class MainWindowV
       End If
    End Sub
 
+   Private Sub MainWindowV_StateChanged(sender As Object, e As EventArgs)
+      If Not IsNothing(Map.refSecondaryWindowV) AndAlso Not Map.refSecondaryWindowV.WindowChangingState Then
+         Map.refSecondaryWindowV.WindowState = Me.WindowState
+         'Application.Current.MainWindow.Topmost = True
+         'Application.Current.MainWindow.Topmost = False
+      End If
+   End Sub
+
 #End Region    ' EVENTS
 
 End Class

Icarus/MainWindow/MainWindowVM.vb

@@ -285,7 +285,11 @@ Public Class MainWindowVM
       ' Se non confermata chiusura, esco
       If Not bAllowClose Then Return
       ' salvo modo di visualizzazione
-      WriteMainPrivateProfileString(S_SCENE, K_SHOWMODE, EgtGetShowMode().ToString)
+      WriteMainPrivateProfileString(S_SCENE, K_SHOWMODE, EgtGetShowMode().ToString())
+      ' Salvo stato visualizzazione direzione curve
+      WriteMainPrivateProfileString(S_SCENE, K_CURVEDIR, If(EgtGetShowCurveDirection(), "1", "0"))
+      ' Salvo stato visualizzazione griglia
+      WriteMainPrivateProfileString(S_GRID, K_SHOWGRID, If(Map.refMyStatusBarVM.bGridVisibility, "1", "0"))
       ' Termino il Model
       m_MainWindowM.Close()
       ' Termino il programma

Icarus/ManagePartPanel/ManagePartPanelV.xaml

@@ -0,0 +1,147 @@
+<UserControl x:Class="ManagePartPanelV"
+             xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+             xmlns:local="clr-namespace:Icarus"
+             xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+             Width="150"
+             Margin="5,0,0,0"
+             VerticalAlignment="Stretch">
+   <Grid DockPanel.Dock="Left">
+      <Grid.RowDefinitions>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="2*"/>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="Auto"/>
+      </Grid.RowDefinitions>
+      <Border Style="{StaticResource LeftPanelTitle_Border}">
+         <TextBlock Text="Part Entity List"
+                    FontWeight="DemiBold"
+                    FontSize="14"/>
+      </Border>
+      <!--<UniformGrid Grid.Row="1" Rows="1"
+                   IsEnabled="{Binding IsEnabled}">
+         <Button DockPanel.Dock="Left"
+                 Content="+"
+                 FontSize="20"
+                 Command="{Binding AddPart_Command}"
+                 Style="{StaticResource LeftPanel_Button}"/>
+         <Button DockPanel.Dock="Left"
+                 Content="-"
+                 FontSize="20"
+                 Command="{Binding RemovePart_Command}"
+                 Style="{StaticResource LeftPanel_Button}"/>
+      </UniformGrid>-->
+      <TreeView Grid.Row="2" 
+                ItemsSource="{Binding ManagerPartList}"
+                MinHeight="200"
+                IsEnabled="{Binding IsEnabled}">
+         <TreeView.Resources>
+            <HierarchicalDataTemplate DataType="{x:Type local:ManagePart_Part}" 
+                                      ItemsSource="{Binding LayerList}">
+               <StackPanel Orientation="Horizontal">
+                  <Image Source="/Resources/TreeView/Folder.png" 
+                         Height="15"/>
+                  <Grid>
+                     <TextBlock Text="{Binding sName}"
+                                Visibility="{Binding TextBlock_Visibility}"/>
+                     <EgtWPFLib5:EgtTextBox Text="{Binding sName, UpdateSourceTrigger=Explicit}"
+                                            IsExplicitFocused="{Binding UserShouldEditValueNow}"
+                                            Visibility="{Binding TextBox_Visibility}"
+                                            Style="{StaticResource OptionTextBox}"/>
+                  </Grid>
+               </StackPanel>
+            </HierarchicalDataTemplate>
+            <HierarchicalDataTemplate DataType="{x:Type local:ManagePart_Layer}" 
+                                      ItemsSource="{Binding EntityList, UpdateSourceTrigger=PropertyChanged}">
+               <StackPanel Orientation="Horizontal">
+                  <Image Source="/Resources/TreeView/Folder.png"
+                         Height="15"/>
+                  <TextBlock Text="{Binding sName}" />
+               </StackPanel>
+            </HierarchicalDataTemplate>
+            <HierarchicalDataTemplate DataType="{x:Type local:PartManager_GeomEntity}">
+               <Grid>
+                  <TextBlock Text="{Binding sName}" />
+                  <EgtWPFLib5:EgtTextBox Text="{Binding sName, UpdateSourceTrigger=Explicit}"
+                                         IsExplicitFocused="{Binding UserShouldEditValueNow}"
+                                         Visibility="{Binding TextBox_Visibility}"
+                                         Style="{StaticResource OptionTextBox}"/>
+               </Grid>
+            </HierarchicalDataTemplate>
+            <!-- Menu' tasto destro -->
+            <ContextMenu x:Key="RowMenu" ItemsSource="{Binding MenuList}" >
+               <ContextMenu.ItemContainerStyle>
+                  <Style TargetType="MenuItem">
+                     <Setter Property="Command" Value="{Binding MenuItem_Command}"/>
+                     <Setter Property="Header" Value="{Binding sMsg}"/>
+                  </Style>
+               </ContextMenu.ItemContainerStyle>
+            </ContextMenu>
+         </TreeView.Resources>
+         <TreeView.ItemContainerStyle>
+            <Style TargetType="{x:Type TreeViewItem}">
+               <Setter Property="IsSelected" Value="{Binding bIsSelected, Mode=TwoWay, UpdateSourceTrigger=PropertyChanged}"/>
+               <Setter Property="IsExpanded" Value="True"/>
+               <Setter Property="ContextMenu" Value="{StaticResource RowMenu}"/>
+               <EventSetter Event="ContextMenuOpening" Handler="Item_ContextMenuOpening"/>
+            </Style>
+         </TreeView.ItemContainerStyle>
+      </TreeView>
+      <Border Grid.Row="3"
+              Visibility="{Binding IsImport_Visibility}"
+              Style="{StaticResource LeftPanelTitle_Border}">
+         <TextBlock Text="Imported Entity List"
+                    FontWeight="DemiBold"
+                    FontSize="14"/>
+      </Border>
+      <ListBox Grid.Row="4" 
+               ItemsSource="{Binding ImportedEntityList, UpdateSourceTrigger=PropertyChanged}"
+               SelectedItem="{Binding SelImportedEntity}"
+               MinHeight="100"
+               IsEnabled="{Binding IsEnabled}"
+               Visibility="{Binding IsImport_Visibility}">
+         <ListBox.Resources>
+            <!-- Menu' tasto destro -->
+            <ContextMenu x:Key="RowMenu" ItemsSource="{Binding MenuList}" >
+               <ContextMenu.ItemContainerStyle>
+                  <Style TargetType="MenuItem">
+                     <Setter Property="Command" Value="{Binding MenuItem_Command}"/>
+                     <Setter Property="Header" Value="{Binding sMsg}"/>
+                  </Style>
+               </ContextMenu.ItemContainerStyle>
+            </ContextMenu>
+         </ListBox.Resources>
+         <ListBox.ItemContainerStyle>
+            <Style TargetType="ListBoxItem">
+               <Setter Property="HorizontalContentAlignment" Value="Stretch"/>
+               <Setter Property="ContextMenu" Value="{StaticResource RowMenu}" />
+            </Style>
+         </ListBox.ItemContainerStyle>
+         <ListBox.ItemTemplate>
+            <DataTemplate>
+               <Grid HorizontalAlignment="Stretch">
+                  <Grid.InputBindings>
+                     <MouseBinding Gesture="LeftDoubleClick"
+                                   Command="{Binding GeomEntityDoubleClick_Command}"/>
+                  </Grid.InputBindings>
+                  <TextBlock Text="{Binding ghName}">
+                  </TextBlock>
+               </Grid>
+            </DataTemplate>
+         </ListBox.ItemTemplate>
+      </ListBox>
+      <UniformGrid Grid.Row="5"
+                   Rows="1"
+                   IsEnabled="{Binding IsEnabled}">
+         <Button Content="Ok"
+                 Command="{Binding Ok_Command}"
+                 Style="{StaticResource ToolBar_TextButton}"/>
+         <Button Content="Cancel"
+                 Command="{Binding Cancel_Command}"
+                 Visibility="{Binding IsImport_Visibility}"
+                 Style="{StaticResource ToolBar_TextButton}"/>
+      </UniformGrid>
+   </Grid>
+</UserControl>

Icarus/ManagePartPanel/ManagePartPanelV.xaml.vb

@@ -0,0 +1,24 @@
+Public Class ManagePartPanelV
+
+   Protected Sub Item_ContextMenuOpening(sender As Object, e As ContextMenuEventArgs)
+      Dim PartItem As ManagePart_Part
+      Dim LayerItem As ManagePart_Layer
+      Dim EntityItem As PartManager_GeomEntity
+      Select Case e.OriginalSource.DataContext.GetType()
+         Case GetType(ManagePart_Part)
+            PartItem = DirectCast(e.OriginalSource.DataContext, ManagePart_Part)
+            If PartItem.MenuList.Count = 0 Then
+               e.Handled = True
+            End If
+         Case GetType(ManagePart_Layer)
+            LayerItem = DirectCast(e.OriginalSource.DataContext, ManagePart_Layer)
+            e.Handled = True
+         Case GetType(PartManager_GeomEntity)
+            EntityItem = DirectCast(e.OriginalSource.DataContext, PartManager_GeomEntity)
+            If EntityItem.MenuList.Count = 0 Then
+               e.Handled = True
+            End If
+      End Select
+   End Sub
+
+End Class

Icarus/ManagePartPanel/ManagePartPanelVM.vb

@@ -0,0 +1,506 @@
+Imports System.Collections.ObjectModel
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class ManagePartPanelVM
+   Inherits VMBase
+
+   Public Enum ManagePartType
+      IMPORT = 1
+      MODIFY = 2
+   End Enum
+
+   Private m_Type As ManagePartType
+   Friend ReadOnly Property Type As ManagePartType
+      Get
+         Return m_Type
+      End Get
+   End Property
+
+   Private m_nImportedPartId As Integer = GDB_ID.NULL
+   Friend ReadOnly Property nImportedPartId As Integer
+      Get
+         Return m_nImportedPartId
+      End Get
+   End Property
+
+   Private m_ImportedEntityList As New ObservableCollection(Of PartManager_GeomEntity)
+   Public Property ImportedEntityList As ObservableCollection(Of PartManager_GeomEntity)
+      Get
+         Return m_ImportedEntityList
+      End Get
+      Set(value As ObservableCollection(Of PartManager_GeomEntity))
+         m_ImportedEntityList = value
+      End Set
+   End Property
+
+   Private m_SelImportedEntity As PartManager_GeomEntity
+   Public Property SelImportedEntity As PartManager_GeomEntity
+      Get
+         Return m_SelImportedEntity
+      End Get
+      Set(value As PartManager_GeomEntity)
+         m_SelImportedEntity = value
+         EgtDeselectAll()
+         If Not IsNothing(m_SelImportedEntity) Then
+            EgtSelectObj(m_SelImportedEntity.nId)
+         End If
+         EgtDraw()
+      End Set
+   End Property
+   Friend Sub SetSelImportedEntity(nId As Integer)
+      Dim SelEntity As PartManager_GeomEntity = Nothing
+      ' cerco tra entita' importate
+      SelEntity = m_ImportedEntityList.FirstOrDefault(Function(x) x.nId = nId)
+      If IsNothing(SelEntity) Then
+         ' cerco tra pezzi creati
+         For Each ManagePart In m_ManagerPartList
+            For Each Layer In ManagePart.LayerList
+               SelEntity = Layer.EntityList.FirstOrDefault(Function(x) x.nId = nId)
+               If Not IsNothing(SelEntity) Then
+                  SelEntity.bIsSelected = True
+                  SelEntity.NotifyPropertyChanged(NameOf(SelEntity.bIsSelected))
+                  Exit For
+               End If
+            Next
+            If Not IsNothing(SelEntity) Then
+               Exit For
+            End If
+         Next
+      End If
+      m_SelImportedEntity = SelEntity
+      EgtDeselectAll()
+      If Not IsNothing(m_SelImportedEntity) Then
+         EgtSelectObj(m_SelImportedEntity.nId)
+      End If
+      EgtDraw()
+      NotifyPropertyChanged(NameOf(SelImportedEntity))
+   End Sub
+
+   Private m_ManagerPartList As New ObservableCollection(Of ManagePart_Part)
+   Public ReadOnly Property ManagerPartList As ObservableCollection(Of ManagePart_Part)
+      Get
+         Return m_ManagerPartList
+      End Get
+   End Property
+
+   Private m_SelManagerPart As ManagePart_Part
+   Friend Sub SetSelManagerPart(SelManagePart_Part As ManagePart_Part)
+      m_SelManagerPart = SelManagePart_Part
+      m_SelManagerLayer = Nothing
+   End Sub
+   Public ReadOnly Property SelManagerPart As ManagePart_Part
+      Get
+         Return m_SelManagerPart
+      End Get
+   End Property
+
+   Private m_SelManagerLayer As ManagePart_Layer
+   Public ReadOnly Property SelManagerLayer As ManagePart_Layer
+      Get
+         Return m_SelManagerLayer
+      End Get
+   End Property
+   Friend Sub SetSelManagerLayer(SelManagePart_Layer As ManagePart_Layer)
+      m_SelManagerPart = m_ManagerPartList.FirstOrDefault(Function(x) x.LayerList.Contains(SelManagePart_Layer))
+      m_SelManagerLayer = SelManagePart_Layer
+   End Sub
+
+   Private m_SelPartManager_GeomEntity As PartManager_GeomEntity
+   Public ReadOnly Property SelPartManager_GeomEntity As PartManager_GeomEntity
+      Get
+         Return m_SelPartManager_GeomEntity
+      End Get
+   End Property
+   Friend Sub SetSelPartManager_GeomEntity(SelPartManager_GeomEntity As PartManager_GeomEntity)
+      For Each CurrPart In m_ManagerPartList
+         Dim CurrLayer As ManagePart_Layer = CurrPart.LayerList.FirstOrDefault(Function(x) x.EntityList.Contains(SelPartManager_GeomEntity))
+         If Not IsNothing(CurrLayer) Then
+            m_SelManagerPart = CurrPart
+            m_SelManagerLayer = CurrLayer
+            Exit For
+         End If
+      Next
+      m_SelPartManager_GeomEntity = SelPartManager_GeomEntity
+   End Sub
+
+   Public ReadOnly Property IsImport_Visibility As Visibility
+      Get
+         Select Case m_Type
+            Case ManagePartType.IMPORT
+               Return Visibility.Visible
+            Case Else ' ManagePartType.MODIFY
+               Return Visibility.Collapsed
+         End Select
+      End Get
+   End Property
+
+   Private m_IsEnabled As Boolean = True
+   Public ReadOnly Property IsEnabled As Boolean
+      Get
+         Return m_IsEnabled
+      End Get
+   End Property
+   Friend Sub SetIsEnabled(value As Boolean)
+      m_IsEnabled = value
+      NotifyPropertyChanged(NameOf(IsEnabled))
+   End Sub
+
+   ' Definizione comandi
+   Private m_cmdSetReference As ICommand
+   Private m_cmdAddPart As ICommand
+   Private m_cmdRemovePart As ICommand
+   Private m_cmdOk As ICommand
+   Private m_cmdCancel As ICommand
+
+   Sub New()
+      ' Creo riferimento a questa classe in EgtCAM5Map
+      Map.SetRefManagePartPanelVM(Me)
+   End Sub
+
+#Region "METHODS"
+
+   Friend Sub Init(Type As ManagePartType)
+      m_Type = Type
+      Select Case Type
+         Case ManagePartType.IMPORT
+            ' import
+            m_ImportedEntityList.Clear()
+            m_ManagerPartList.Clear()
+            ' aggiungo geometrie importate a lista
+            m_nImportedPartId = EgtGetLastPart()
+            Dim nLayerId As Integer = EgtGetFirstLayer(m_nImportedPartId)
+            Dim nGeometryId As Integer = EgtGetFirstInGroup(nLayerId)
+            While nGeometryId <> GDB_ID.NULL
+               Dim sGeometryName As String = ""
+               EgtGetName(nGeometryId, sGeometryName)
+               m_ImportedEntityList.Add(New PartManager_GeomEntity(Nothing, nGeometryId))
+               nGeometryId = EgtGetNext(nGeometryId)
+            End While
+            ' aggiungo primo pezzo
+            m_ManagerPartList.Add(New ManagePart_Part(Nothing))
+            m_ManagerPartList(0).LayerList.FirstOrDefault(Function(x) x.Type = ManagePart_Layer.LayerType.PRINT_SOLID).bIsSelected = True
+            ' aggiorno i contextmenu di tutti gli entity
+            UpdateAllEntityContextMenu()
+         Case ManagePartType.MODIFY
+            ' modify
+            m_ImportedEntityList.Clear()
+            m_ManagerPartList.Clear()
+            ' carico pezzi in lista
+            For Each PrintPart In Map.refTopPanelVM.PartList
+               m_ManagerPartList.Add(New ManagePart_Part(PrintPart))
+            Next
+      End Select
+      NotifyPropertyChanged(NameOf(IsImport_Visibility))
+      EgtDeselectAll()
+   End Sub
+
+   Friend Sub UpdateAllEntityContextMenu()
+      ' aggiorno i contextmenu di tutti gli entity
+      For Each ManagePart In m_ManagerPartList
+         For Each Layer In ManagePart.LayerList
+            For Each Entity In Layer.EntityList
+               Entity.UpdateContextMenu()
+            Next
+         Next
+      Next
+      For Each Entity In ImportedEntityList
+         Entity.UpdateContextMenu()
+      Next
+   End Sub
+
+#End Region    ' METHODS
+
+#Region "COMMANDS"
+
+#Region "AddPart"
+
+   Public ReadOnly Property AddPart_Command As ICommand
+      Get
+         If m_cmdAddPart Is Nothing Then
+            m_cmdAddPart = New Command(AddressOf AddPart)
+         End If
+         Return m_cmdAddPart
+      End Get
+   End Property
+
+   Public Sub AddPart()
+      m_ManagerPartList.Add(New ManagePart_Part(Nothing))
+      ' aggiorno i contextmenu di tutti gli entity
+      UpdateAllEntityContextMenu()
+   End Sub
+
+#End Region    ' AddPart
+
+#Region "RemovePart"
+
+   Public ReadOnly Property RemovePart_Command As ICommand
+      Get
+         If m_cmdRemovePart Is Nothing Then
+            m_cmdRemovePart = New Command(AddressOf RemovePart)
+         End If
+         Return m_cmdRemovePart
+      End Get
+   End Property
+
+   Public Sub RemovePart()
+      If IsNothing(SelManagerLayer) AndAlso m_ManagerPartList.Count > 1 Then
+         ' rimuovo pezzo
+         m_ManagerPartList.Remove(SelManagerPart)
+         'Else
+         '   ' rimuovo geometria
+         '   Dim CurrEntity As PartManager_GeomEntity = m_SelPartManager_GeomEntity
+         '   SelManagerLayer.EntityList.Remove(m_SelPartManager_GeomEntity)
+         '   ' la rimetto in lista importati
+         '   ImportedEntityList.Add(CurrEntity)
+      End If
+   End Sub
+
+#End Region    ' RemovePart
+
+#Region "Ok"
+
+   Public ReadOnly Property Ok_Command As ICommand
+      Get
+         If m_cmdOk Is Nothing Then
+            m_cmdOk = New Command(AddressOf Ok)
+         End If
+         Return m_cmdOk
+      End Get
+   End Property
+
+   Public Sub Ok()
+      Select Case m_Type
+         Case ManagePartType.IMPORT
+            Dim sErr As New List(Of String)
+            ' verifico che tutti i pezzi abbiano una superficie da stampare nel layer apposito
+            For Each CurrPart In m_ManagerPartList
+               For Each CurrLayer In CurrPart.LayerList
+                  Select Case CurrLayer.Type
+                     Case ManagePart_Layer.LayerType.PRINT_SOLID
+                        If CurrLayer.EntityList.Count = 0 Then
+                           If sErr.Count > 0 Then sErr(sErr.Count - 1) &= Environment.NewLine
+                           sErr.Add(CurrPart.sName & " - No print surface defined!")
+                        End If
+                  End Select
+               Next
+            Next
+            If sErr.Count > 0 Then
+               MessageBox.Show(String.Concat(sErr), "Error")
+               Return
+            Else
+               ' Creo pezzi e layer necessari
+               For ManagePart_PartIndex = 0 To m_ManagerPartList.Count - 1
+                  Dim ManagePart_Part As ManagePart_Part = m_ManagerPartList(ManagePart_PartIndex)
+                  Dim frImportedPart As New Frame3d
+                  EgtGetGroupGlobFrame(m_nImportedPartId, frImportedPart)
+                  Dim nPartId As Integer = EgtCreateGroup(GDB_ID.ROOT, frImportedPart)
+                  EgtSetName(nPartId, PART)
+                  Dim nFrameId As Integer = GDB_ID.NULL
+                  Dim b3PrintSolid As New BBox3d
+                  Dim nPrintPartLayerId As Integer = GDB_ID.NULL
+                  Dim PrintSolidEntity As PartManager_GeomEntity = Nothing
+                  Dim nRibsLayerId As Integer = GDB_ID.NULL
+                  Dim nShellNumberLayerId As Integer = GDB_ID.NULL
+                  Dim nAuxSolidsLayerId As Integer = GDB_ID.NULL
+                  Dim nMachStartLayerId As Integer = GDB_ID.NULL
+                  Dim nOthersLayerId As Integer = GDB_ID.NULL
+                  For Each ManagePart_Layer In ManagePart_Part.LayerList
+                     Select Case ManagePart_Layer.Type
+                        Case ManagePart_Layer.LayerType.PRINT_SOLID
+                           nPrintPartLayerId = EgtCreateGroup(nPartId)
+                           EgtSetName(nPrintPartLayerId, PRINT_SOLID)
+                           If ManagePart_Layer.EntityList.Count > 0 Then
+                              PrintSolidEntity = ManagePart_Layer.EntityList(0)
+                              EgtRelocateGlob(PrintSolidEntity.nId, nPrintPartLayerId, GDB_POS.LAST_SON)
+                              ' calcolo box superficie per creazione riferimento
+                              EgtGetBBoxGlob(PrintSolidEntity.nId, GDB_BB.STANDARD, b3PrintSolid)
+                              ' coloro l'entita'
+                              EgtSetColor(PrintSolidEntity.nId, GeomEntityColors.c3Print)
+                              If PrintSolidEntity.sName <> PrintSolidEntity.nId.ToString() Then
+                                 EgtSetInfo(PrintSolidEntity.nId, ENTITY_NAME, PrintSolidEntity.sName)
+                              End If
+                           End If
+                        Case ManagePart_Layer.LayerType.MACH_START
+                           nMachStartLayerId = EgtCreateGroup(nPartId)
+                           EgtSetName(nMachStartLayerId, LAY_MACH_START)
+                           Dim nMachStartId As Integer = GDB_ID.NULL
+                           If ManagePart_Layer.EntityList.Count > 0 Then
+                              For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
+                                 ' se punto o curva compo
+                                 Dim EntityType As GDB_TY = EgtGetType(PartManager_GeomEntity.nId)
+                                 Select Case EntityType
+                                    Case GDB_TY.GEO_POINT, GDB_TY.CRV_COMPO
+                                       ' gli cambio layer
+                                       EgtRelocateGlob(PartManager_GeomEntity.nId, nMachStartLayerId, GDB_POS.LAST_SON)
+                                       nMachStartId = PartManager_GeomEntity.nId
+                                    Case GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
+                                       ' altrimenti la trasformo in curva compo
+                                       nMachStartId = EgtCreateCurveCompo(nMachStartLayerId, PartManager_GeomEntity.nId, True)
+                                 End Select
+                                 EgtSetName(nMachStartId, START_GEOM)
+                                 ' coloro l'entita'
+                                 EgtSetColor(nMachStartId, GeomEntityColors.c3MachStart)
+                                 If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                    EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                                 End If
+                              Next
+                           Else
+                              ' creo punto di partenza
+                              Dim ptStart As Point3d = b3PrintSolid.Center() - 0.6 * b3PrintSolid.DimY() * Vector3d.Y_AX() - 0.5 * b3PrintSolid.DimZ() * Vector3d.Z_AX()
+                              nMachStartId = EgtCreateGeoPoint(nMachStartLayerId, ptStart, GDB_RT.GLOB)
+                              EgtSetName(nMachStartId, START_GEOM)
+                              ' coloro l'entita' di rosso
+                              EgtSetColor(nMachStartId, GeomEntityColors.c3MachStart)
+                           End If
+                        Case ManagePart_Layer.LayerType.RIBS
+                           nRibsLayerId = EgtCreateGroup(nPartId)
+                           EgtSetName(nRibsLayerId, LAY_RIBS)
+                           For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
+                              EgtSetInfo(PartManager_GeomEntity.nId, KEY_RIB_TYPE, RibEntity.RibTypes.FROMIMPORT)
+                              EgtRelocateGlob(PartManager_GeomEntity.nId, nRibsLayerId, GDB_POS.LAST_SON)
+                              ' coloro l'entita'
+                              EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3Rib)
+                              If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                 EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                              End If
+                           Next
+                        Case ManagePart_Layer.LayerType.SHELL_NUMBER
+                           nShellNumberLayerId = EgtCreateGroup(nPartId)
+                           EgtSetName(nShellNumberLayerId, LAY_SHELL_NBR)
+                           For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
+                              EgtSetInfo(PartManager_GeomEntity.nId, KEY_SHELLNBR_TYPE, ShellNumberEntity.ShellNumberTypes.FROMIMPORT)
+                              EgtRelocateGlob(PartManager_GeomEntity.nId, nShellNumberLayerId, GDB_POS.LAST_SON)
+                              ' coloro l'entita'
+                              EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3ShellNumber)
+                              If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                 EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                              End If
+                           Next
+                        Case ManagePart_Layer.LayerType.AUX_SOLIDS
+                           nAuxSolidsLayerId = EgtCreateGroup(nPartId)
+                           EgtSetName(nAuxSolidsLayerId, LAY_AUX_SOLIDS)
+                           For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
+                              EgtSetInfo(PartManager_GeomEntity.nId, KEY_AUXSOLID_TYPE, RibEntity.RibTypes.FROMIMPORT)
+                              EgtRelocateGlob(PartManager_GeomEntity.nId, nAuxSolidsLayerId, GDB_POS.LAST_SON)
+                              ' coloro l'entita'
+                              EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3AuxSolids)
+                              If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                 EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                              End If
+                           Next
+                        Case ManagePart_Layer.LayerType.OTHERS
+                           nOthersLayerId = EgtCreateGroup(nPartId)
+                           EgtSetName(nOthersLayerId, LAY_OTHERS)
+                           For Each PartManager_GeomEntity In ManagePart_Layer.EntityList
+                              EgtRelocateGlob(PartManager_GeomEntity.nId, nOthersLayerId, GDB_POS.LAST_SON)
+                              ' coloro l'entita'
+                              EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3Others)
+                              If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                 EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                              End If
+                           Next
+                           If ManagePart_PartIndex = 0 Then
+                              For Each PartManager_GeomEntity In ImportedEntityList
+                                 ' se curva
+                                 Dim EntityType As GDB_TY = EgtGetType(PartManager_GeomEntity.nId)
+                                 Select Case EntityType
+                                    Case GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
+                                       '  la trasformo in curva compo
+                                       Dim nOtherId As Integer = EgtCreateCurveCompo(nOthersLayerId, PartManager_GeomEntity.nId, True)
+                                       ' coloro l'entita'
+                                       EgtSetColor(nOtherId, GeomEntityColors.c3Others)
+                                       If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                          EgtSetInfo(nOtherId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                                       End If
+                                    Case Else
+                                       ' altrimenti la sposto solamente
+                                       EgtRelocateGlob(PartManager_GeomEntity.nId, nOthersLayerId, GDB_POS.LAST_SON)
+                                       ' coloro l'entita'
+                                       EgtSetColor(PartManager_GeomEntity.nId, GeomEntityColors.c3Others)
+                                       If PartManager_GeomEntity.sName <> PartManager_GeomEntity.nId.ToString() Then
+                                          EgtSetInfo(PartManager_GeomEntity.nId, ENTITY_NAME, PartManager_GeomEntity.sName)
+                                       End If
+                                 End Select
+                              Next
+                           End If
+                     End Select
+                  Next
+                  ' aggiungo riferimento
+                  Dim nReferenceLayerId As Integer = EgtCreateGroup(nPartId)
+                  EgtSetName(nReferenceLayerId, LAY_REFERENCE)
+                  ' Creo riferimento 
+                  Dim ptOrig As New Point3d(b3PrintSolid.Min())
+                  Dim frPrintSolid As New Frame3d(ptOrig)
+                  nFrameId = EgtCreateGeoFrame(nReferenceLayerId, frPrintSolid, GDB_RT.GLOB)
+                  If nFrameId Then
+                     EgtSetName(nFrameId, FRAME_PART)
+                     EgtSetMode(nFrameId, GDB_MD.LOCKED)
+                  End If
+                  EgtSetInfo(nReferenceLayerId, KEY_REFERENCE, ReferenceBtn.References.BL)
+                  ' appoggio il pezzo sulla tavola
+                  EgtMove(nPartId, New Vector3d(0, 0, -b3PrintSolid.Min.z))
+                  ' lo aggiungo a lista pezzi 
+                  Dim sFilePath As String = ""
+                  EgtGetInfo(m_nImportedPartId, FILE_PATH, sFilePath)
+                  EgtSetInfo(nPartId, FILE_PATH, sFilePath)
+                  EgtSetInfo(nPartId, PART_NAME, ManagePart_Part.sName)
+                  EgtSetInfo(nPartId, "PartOnTable", 1)
+                  Dim NewPart As New Print3dPartVM(nPartId, nPrintPartLayerId, nReferenceLayerId, nFrameId, nMachStartLayerId, nRibsLayerId, nShellNumberLayerId, nAuxSolidsLayerId, nOthersLayerId, sFilePath)
+                  Map.refTopPanelVM.PartList.Add(NewPart)
+               Next
+            End If
+            'EgtAddMachGroup("3dPrint")
+            'EgtSetTable("Tab")
+
+            'Dim nRawId As Integer = EgtAddRawPart(b3PrintSolid.Min, b3PrintSolid.DimX, b3PrintSolid.DimY, b3PrintSolid.DimZ, New Color3d(128, 128, 128, 30))
+            'EgtAddPartToRawPart(nPartId, b3PrintSolid.Min, nRawId)
+            'EgtMoveToCornerRawPart(nRawId, New Point3d(dPosX, dPosY, 0), MCH_CR.BL)
+
+            'EgtResetCurrMachGroup()
+
+            ' seleziono ultimo pezzo aggiunto
+            Map.refTopPanelVM.SelLastPart()
+            ' elimino vecchio pezzo d'importazione
+            EgtErase(m_nImportedPartId)
+
+            EgtDraw()
+
+         Case ManagePartType.MODIFY
+            ' nulla da fare
+      End Select
+      ' ripristino modalita' standard
+      Map.refTopPanelVM.SelPage = Pages.MODIFY
+   End Sub
+
+#End Region    ' Ok
+
+#Region "Cancel"
+
+   Public ReadOnly Property Cancel_Command As ICommand
+      Get
+         If m_cmdCancel Is Nothing Then
+            m_cmdCancel = New Command(AddressOf Cancel)
+         End If
+         Return m_cmdCancel
+      End Get
+   End Property
+
+   Public Sub Cancel()
+      ' elimino pezzo importato
+      EgtErase(m_nImportedPartId)
+      EgtDraw()
+      ' se ci sono pezzi
+      If Map.refTopPanelVM.PartList.Count > 0 Then
+         ' ripristino modalita' standard
+         Map.refTopPanelVM.SelPage = Pages.MODIFY
+      Else
+         Map.refTopPanelVM.SelPage = Pages.NULL
+      End If
+   End Sub
+
+#End Region    ' Cancel
+
+#End Region    ' COMMANDS
+
+End Class

Icarus/ManagePartPanel/ManagePartUtility.vb

@@ -0,0 +1,907 @@
+Imports System.Collections.ObjectModel
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class PartManager_GeomEntity
+   Inherits VMBase
+
+   ' layer sotto cui e' questa entita'
+   Private m_OrigLayer As ManagePart_Layer
+   Friend ReadOnly Property OrigLayer As ManagePart_Layer
+      Get
+         Return m_OrigLayer
+      End Get
+   End Property
+
+   Private m_bIsSelected As Boolean
+   Public Property bIsSelected As Boolean
+      Get
+         Return m_bIsSelected
+      End Get
+      Set(value As Boolean)
+         m_bIsSelected = value
+         ' seleziono in scena
+         EgtDeselectAll()
+         If Not IsNothing(value) Then
+            EgtSelectObj(m_nId)
+         End If
+         EgtDraw()
+         ' segno come elemento selezionato in treeview
+         Map.refManagePartPanelVM.SetSelPartManager_GeomEntity(Me)
+      End Set
+   End Property
+
+   Private m_nId As Integer = GDB_ID.NULL
+   Public ReadOnly Property nId As Integer
+      Get
+         Return m_nId
+      End Get
+   End Property
+
+   Private m_sName As String
+   Public Property sName As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+         SetTextBoxVisibility(False)
+         NotifyPropertyChanged(NameOf(sName))
+         If Map.refManagePartPanelVM.Type = ManagePartPanelVM.ManagePartType.MODIFY Then
+            EgtSetInfo(m_nId, ENTITY_NAME, value)
+         End If
+         Map.refManagePartPanelVM.SetIsEnabled(True)
+      End Set
+   End Property
+
+   Public ReadOnly Property ghName As String
+      Get
+         Return m_nId
+      End Get
+   End Property
+
+   Private m_MenuList As New ObservableCollection(Of GeomEntity_MenuItem)
+   Public Property MenuList As ObservableCollection(Of GeomEntity_MenuItem)
+      Get
+         Return m_MenuList
+      End Get
+      Set(value As ObservableCollection(Of GeomEntity_MenuItem))
+         m_MenuList = value
+      End Set
+   End Property
+
+   Private m_UserShouldEditValueNow As Boolean = False
+   Public Property UserShouldEditValueNow As Boolean
+      Get
+         Return m_UserShouldEditValueNow
+      End Get
+      Set(value As Boolean)
+         m_UserShouldEditValueNow = value
+      End Set
+   End Property
+   Friend Sub SetUserShouldEditValueNow()
+      m_UserShouldEditValueNow = True
+      NotifyPropertyChanged(NameOf(UserShouldEditValueNow))
+      m_UserShouldEditValueNow = False
+      NotifyPropertyChanged(NameOf(UserShouldEditValueNow))
+   End Sub
+
+   Private m_TextBox_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property TextBox_Visibility As Visibility
+      Get
+         Return m_TextBox_Visibility
+      End Get
+   End Property
+
+   Private m_TextBlock_Visibility As Visibility = Visibility.Visible
+   Public ReadOnly Property TextBlock_Visibility As Visibility
+      Get
+         Return m_TextBlock_Visibility
+      End Get
+   End Property
+
+   ' Definizione comandi
+   Private m_cmdGeomEntityDoubleClick As ICommand
+
+   Sub New(OrigLayer As ManagePart_Layer, nId As Integer)
+      m_nId = nId
+      Dim sName As String = ""
+      EgtGetInfo(m_nId, ENTITY_NAME, sName)
+      m_sName = If(String.IsNullOrWhiteSpace(sName), m_nId, sName)
+      m_OrigLayer = OrigLayer
+      ' aggiungo voci layer a contextmenu
+      UpdateContextMenu()
+   End Sub
+
+   Friend Sub UpdateContextMenu()
+      m_MenuList.Clear()
+      Select Case Map.refManagePartPanelVM.Type
+         Case ManagePartPanelVM.ManagePartType.IMPORT
+            Dim bIsSurface As Boolean = False
+            For Each ProjectPart In Map.refManagePartPanelVM.ManagerPartList
+               ' verifico in quali layer puo' andare questo elemento
+               Dim EntityType As GDB_TY = EgtGetType(nId)
+               Dim nPrintSolidCount As Integer = 0
+               Dim ManageLayer As ManagePart_Layer = ProjectPart.LayerList.FirstOrDefault(Function(x) x.Type = ManagePart_Layer.LayerType.PRINT_SOLID)
+               If Not IsNothing(ManageLayer) Then
+                  nPrintSolidCount = ManageLayer.EntityList.Count
+               End If
+               Select Case EntityType
+                  Case GDB_TY.GEO_POINT, GDB_TY.CRV_COMPO, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
+                     If Not IsNothing(OrigLayer) Then
+                        ' recupero i layer
+                        If Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.MACH_START Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.MACH_START, ProjectPart))
+                        If Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.OTHERS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     Else
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.MACH_START, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     End If
+                  Case GDB_TY.SRF_MESH
+                     bIsSurface = True
+                     If Not IsNothing(OrigLayer) Then
+                        ' verifico se volume chiuso
+                        If nPrintSolidCount = 0 AndAlso (Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.PRINT_SOLID) Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.PRINT_SOLID, ProjectPart))
+                        If Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.SHELL_NUMBER Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.SHELL_NUMBER, ProjectPart))
+                        If Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.AUX_SOLIDS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.AUX_SOLIDS, ProjectPart))
+                        If Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.RIBS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.RIBS, ProjectPart))
+                        If Not ProjectPart Is OrigLayer.OrigPart OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.OTHERS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     Else
+                        If nPrintSolidCount = 0 Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.PRINT_SOLID, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.SHELL_NUMBER, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.AUX_SOLIDS, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.RIBS, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     End If
+               End Select
+            Next
+            If bIsSurface Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.NEWPART))
+            m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.CHANGENAME))
+            m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.DELETE))
+         Case ManagePartPanelVM.ManagePartType.MODIFY
+            Dim bIsSurface As Boolean = False
+            For Each ProjectPart In Map.refTopPanelVM.PartList
+               ' verifico in quali layer puo' andare questo elemento
+               Dim EntityType As GDB_TY = EgtGetType(nId)
+               Dim nPrintSolidCount As Integer = EgtGetGroupObjs(ProjectPart.nPrintSolidLayerId)
+               Select Case EntityType
+                  Case GDB_TY.GEO_POINT, GDB_TY.CRV_COMPO, GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_LINE
+                     If Not IsNothing(OrigLayer) Then
+                        ' recupero i layer
+                        If ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.MACH_START Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.MACH_START, ProjectPart))
+                        If ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.OTHERS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     Else
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.MACH_START, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     End If
+                  Case GDB_TY.SRF_MESH
+                     bIsSurface = True
+                     If Not IsNothing(OrigLayer) Then
+                        ' verifico se volume chiuso
+                        If nPrintSolidCount = 0 AndAlso (ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.PRINT_SOLID) Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.PRINT_SOLID, ProjectPart))
+                        If ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.SHELL_NUMBER Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.SHELL_NUMBER, ProjectPart))
+                        If ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.AUX_SOLIDS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.AUX_SOLIDS, ProjectPart))
+                        If ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.RIBS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.RIBS, ProjectPart))
+                        If ProjectPart.nPartId <> OrigLayer.OrigPart.PrintPart.nPartId OrElse OrigLayer.Type <> ManagePart_Layer.LayerType.OTHERS Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     Else
+                        If nPrintSolidCount = 0 Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.PRINT_SOLID, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.SHELL_NUMBER, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.AUX_SOLIDS, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.RIBS, ProjectPart))
+                        m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.OTHERS, ProjectPart))
+                     End If
+               End Select
+            Next
+            If bIsSurface Then m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.NEWPART))
+            m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.CHANGENAME))
+            m_MenuList.Add(New GeomEntity_MenuItem(Me, ManagePart_Layer.LayerType.DELETE))
+      End Select
+   End Sub
+
+   Friend Sub UpdateOrigLayer(NewLayer As ManagePart_Layer)
+      m_OrigLayer = NewLayer
+   End Sub
+
+   Friend Sub SetTextBoxVisibility(bValue As Boolean)
+      m_TextBox_Visibility = If(bValue, Visibility.Visible, Visibility.Collapsed)
+      m_TextBlock_Visibility = If(Not bValue, Visibility.Visible, Visibility.Collapsed)
+      NotifyPropertyChanged(NameOf(TextBox_Visibility))
+      NotifyPropertyChanged(NameOf(TextBlock_Visibility))
+      If bValue Then SetUserShouldEditValueNow()
+   End Sub
+
+#Region "COMMANDS"
+
+#Region "GeomEntityDoubleClick"
+
+   Public ReadOnly Property GeomEntityDoubleClick_Command As ICommand
+      Get
+         If m_cmdGeomEntityDoubleClick Is Nothing Then
+            m_cmdGeomEntityDoubleClick = New Command(AddressOf GeomEntityDoubleClick)
+         End If
+         Return m_cmdGeomEntityDoubleClick
+      End Get
+   End Property
+
+   Public Sub GeomEntityDoubleClick()
+      If Not IsNothing(Map.refManagePartPanelVM.SelManagerLayer) Then
+         Map.refManagePartPanelVM.ImportedEntityList.Remove(Me)
+         ' aggiorno riferimenti layer e context menu
+         UpdateOrigLayer(Map.refManagePartPanelVM.SelManagerLayer)
+         UpdateContextMenu()
+         Map.refManagePartPanelVM.SelManagerLayer.EntityList.Add(Me)
+      End If
+   End Sub
+
+#End Region    ' ImportedEntity
+
+#End Region    ' COMMANDS
+
+End Class
+
+Public Class ManagePart_Part
+   Inherits VMBase
+
+   Private m_bIsSelected As Boolean
+   Public Property bIsSelected As Boolean
+      Get
+         Return m_bIsSelected
+      End Get
+      Set(value As Boolean)
+         m_bIsSelected = value
+         Map.refManagePartPanelVM.SetSelManagerPart(Me)
+      End Set
+   End Property
+
+   Private m_nId As Integer
+   Public ReadOnly Property nId As Integer
+      Get
+         Return m_nId
+      End Get
+   End Property
+
+   Private m_PrintPart As Print3dPartVM
+   Public ReadOnly Property PrintPart As Print3dPartVM
+      Get
+         Return m_PrintPart
+      End Get
+   End Property
+
+   Private m_sName As String
+   Public Property sName As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+         SetTextBoxVisibility(False)
+         NotifyPropertyChanged(NameOf(sName))
+         If Map.refManagePartPanelVM.Type = ManagePartPanelVM.ManagePartType.MODIFY Then
+            m_PrintPart.UpdateName(value)
+            EgtSetInfo(m_PrintPart.nPartId, PART_NAME, value)
+         End If
+         Map.refManagePartPanelVM.SetIsEnabled(True)
+      End Set
+   End Property
+
+   Private m_MenuList As New List(Of ManagerPart_MenuItem)
+   Public Property MenuList As List(Of ManagerPart_MenuItem)
+      Get
+         Return m_MenuList
+      End Get
+      Set(value As List(Of ManagerPart_MenuItem))
+         m_MenuList = value
+      End Set
+   End Property
+
+   Private m_LayerList As New ObservableCollection(Of ManagePart_Layer)
+   Public ReadOnly Property LayerList As ObservableCollection(Of ManagePart_Layer)
+      Get
+         Return m_LayerList
+      End Get
+   End Property
+
+   Private m_UserShouldEditValueNow As Boolean = False
+   Public Property UserShouldEditValueNow As Boolean
+      Get
+         Return m_UserShouldEditValueNow
+      End Get
+      Set(value As Boolean)
+         m_UserShouldEditValueNow = value
+      End Set
+   End Property
+   Friend Sub SetUserShouldEditValueNow()
+      m_UserShouldEditValueNow = True
+      NotifyPropertyChanged(NameOf(UserShouldEditValueNow))
+      m_UserShouldEditValueNow = False
+      NotifyPropertyChanged(NameOf(UserShouldEditValueNow))
+   End Sub
+
+   Private m_TextBox_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property TextBox_Visibility As Visibility
+      Get
+         Return m_TextBox_Visibility
+      End Get
+   End Property
+
+   Private m_TextBlock_Visibility As Visibility = Visibility.Visible
+   Public ReadOnly Property TextBlock_Visibility As Visibility
+      Get
+         Return m_TextBlock_Visibility
+      End Get
+   End Property
+
+   Sub New(PrintPart As Print3dPartVM)
+      m_PrintPart = PrintPart
+      'NotifyPropertyChanged(NameOf(sName))
+      If Map.refManagePartPanelVM.ManagerPartList.Count = 0 Then
+         m_nId = 1
+      Else
+         m_nId = Map.refManagePartPanelVM.ManagerPartList.Max(Function(x) x.nId) + 1
+      End If
+      If Not IsNothing(PrintPart) Then
+         m_sName = m_PrintPart.sName
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.PRINT_SOLID, "Print", PrintPart))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.MACH_START, "Layer Start", PrintPart))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.RIBS, "Ribs", PrintPart))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.SHELL_NUMBER, "Reduce Shell Number", PrintPart))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.AUX_SOLIDS, "Filled Solids", PrintPart))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.OTHERS, "Others", PrintPart))
+      Else
+         m_sName = "Part" & m_nId
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.PRINT_SOLID, "Print"))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.MACH_START, "Layer Start"))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.RIBS, "Ribs"))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.SHELL_NUMBER, "Reduce Shell Number"))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.AUX_SOLIDS, "Filled Solids"))
+         m_LayerList.Add(New ManagePart_Layer(Me, ManagePart_Layer.LayerType.OTHERS, "Others"))
+      End If
+      ' creo context menu per cambio nome ed eliminazione
+      m_MenuList.Add(New ManagerPart_MenuItem(Me, ManagerPart_MenuItem.PartMenuCmd.CHANGENAME))
+      m_MenuList.Add(New ManagerPart_MenuItem(Me, ManagerPart_MenuItem.PartMenuCmd.DELETE))
+   End Sub
+
+   Friend Sub SetTextBoxVisibility(bValue As Boolean)
+      m_TextBox_Visibility = If(bValue, Visibility.Visible, Visibility.Collapsed)
+      m_TextBlock_Visibility = If(Not bValue, Visibility.Visible, Visibility.Collapsed)
+      NotifyPropertyChanged(NameOf(TextBox_Visibility))
+      NotifyPropertyChanged(NameOf(TextBlock_Visibility))
+      If bValue Then SetUserShouldEditValueNow()
+   End Sub
+
+End Class
+
+Public Class ManagePart_Layer
+   Inherits VMBase
+
+   Public Enum LayerType As Integer
+      PRINT_SOLID = 1
+      MACH_START = 2
+      RIBS = 3
+      SHELL_NUMBER = 4
+      AUX_SOLIDS = 5
+      OTHERS = 7
+      CHANGENAME = 15
+      DELETE = 16
+      NEWPART = 17
+   End Enum
+
+   ' enita' di origine
+   Private m_OrigPart As ManagePart_Part
+   Public ReadOnly Property OrigPart As ManagePart_Part
+      Get
+         Return m_OrigPart
+      End Get
+   End Property
+
+   Private m_nLayerId As Integer
+
+   Private m_bIsSelected As Boolean
+   Public Property bIsSelected As Boolean
+      Get
+         Return m_bIsSelected
+      End Get
+      Set(value As Boolean)
+         m_bIsSelected = value
+         Map.refManagePartPanelVM.SetSelManagerLayer(Me)
+      End Set
+   End Property
+
+   Private m_Type As LayerType
+   Public Property Type As LayerType
+      Get
+         Return m_Type
+      End Get
+      Set(value As LayerType)
+         m_Type = value
+      End Set
+   End Property
+
+   Private m_sName As String
+   Public Property sName As String
+      Get
+         Return m_sName
+      End Get
+      Set(value As String)
+         m_sName = value
+      End Set
+   End Property
+
+   Private m_EntityList As New ObservableCollection(Of PartManager_GeomEntity)
+   Public Property EntityList As ObservableCollection(Of PartManager_GeomEntity)
+      Get
+         Return m_EntityList
+      End Get
+      Set(value As ObservableCollection(Of PartManager_GeomEntity))
+         m_EntityList = value
+      End Set
+   End Property
+
+   Sub New(OrigPart As ManagePart_Part, Type As LayerType, sName As String)
+      m_OrigPart = OrigPart
+      m_Type = Type
+      m_sName = sName
+   End Sub
+
+   Sub New(OrigPart As ManagePart_Part, Type As LayerType, sName As String, PrintPart As Print3dPartVM)
+      m_OrigPart = OrigPart
+      m_Type = Type
+      m_sName = sName
+      Select Case Type
+         Case LayerType.PRINT_SOLID
+            m_nLayerId = PrintPart.nPrintSolidLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            If nEntityId <> GDB_ID.NULL Then
+               m_EntityList.Add(New PartManager_GeomEntity(Me, nEntityId))
+            End If
+         Case LayerType.MACH_START
+            m_nLayerId = PrintPart.nMachStartLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            While nEntityId <> GDB_ID.NULL
+               m_EntityList.Add(New PartManager_GeomEntity(Me, nEntityId))
+               nEntityId = EgtGetNext(nEntityId)
+            End While
+         Case LayerType.RIBS
+            m_nLayerId = PrintPart.nRibsLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            While nEntityId <> GDB_ID.NULL
+               Dim RibType As Integer = RibEntity.RibTypes.FROMDRAW
+               EgtGetInfo(nEntityId, KEY_RIB_TYPE, RibType)
+               If RibType = RibEntity.RibTypes.FROMIMPORT Then
+                  m_EntityList.Add(New PartManager_GeomEntity(Me, nEntityId))
+               End If
+               nEntityId = EgtGetNext(nEntityId)
+            End While
+         Case LayerType.SHELL_NUMBER
+            m_nLayerId = PrintPart.nShellNumberLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            While nEntityId <> GDB_ID.NULL
+               Dim ShellType As Integer = ShellNumberEntity.ShellNumberTypes.FROMDRAW
+               EgtGetInfo(nEntityId, KEY_SHELLNBR_TYPE, ShellType)
+               If ShellType = ShellNumberEntity.ShellNumberTypes.FROMIMPORT Then
+                  m_EntityList.Add(New PartManager_GeomEntity(Me, nEntityId))
+               End If
+               nEntityId = EgtGetNext(nEntityId)
+            End While
+         Case LayerType.AUX_SOLIDS
+            m_nLayerId = PrintPart.nAuxSolidsLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            While nEntityId <> GDB_ID.NULL
+               'Dim ShellType As Integer = ShellNumberEntity.ShellNumberTypes.FROMDRAW
+               'EgtGetInfo(nEntityId, KEY_SHELLNBR_TYPE, ShellType)
+               'If ShellType = ShellNumberEntity.ShellNumberTypes.FROMIMPORT Then
+               m_EntityList.Add(New PartManager_GeomEntity(Me, nEntityId))
+               'End If
+               nEntityId = EgtGetNext(nEntityId)
+            End While
+         Case LayerType.OTHERS
+            m_nLayerId = PrintPart.nOthersLayerId
+            Dim nEntityId As Integer = EgtGetFirstInGroup(m_nLayerId)
+            While nEntityId <> GDB_ID.NULL
+               m_EntityList.Add(New PartManager_GeomEntity(Me, nEntityId))
+               nEntityId = EgtGetNext(nEntityId)
+            End While
+      End Select
+   End Sub
+
+End Class
+
+Public Class GeomEntity_MenuItem
+   Inherits VMBase
+
+   ' enita' di origine
+   Private m_OrigEntity As PartManager_GeomEntity
+
+   ' pezzo in cui spostare
+   Private m_GeomPart As Print3dPartVM
+   Private m_Part As ManagePart_Part
+
+   ' tipo del layer indicato
+   Private m_Type As ManagePart_Layer.LayerType
+   Public Property Type As ManagePart_Layer.LayerType
+      Get
+         Return m_Type
+      End Get
+      Set(value As ManagePart_Layer.LayerType)
+         m_Type = value
+      End Set
+   End Property
+
+   Public ReadOnly Property sMsg As String
+      Get
+         Dim sType As String = ""
+         Select Case m_Type
+            Case ManagePart_Layer.LayerType.PRINT_SOLID
+               sType = "Print"
+            Case ManagePart_Layer.LayerType.MACH_START
+               sType = "Layer Start"
+            Case ManagePart_Layer.LayerType.RIBS
+               sType = "Ribs"
+            Case ManagePart_Layer.LayerType.SHELL_NUMBER
+               sType = "Reduce shell number"
+            Case ManagePart_Layer.LayerType.AUX_SOLIDS
+               sType = "Filled Solids"
+            Case ManagePart_Layer.LayerType.OTHERS
+               sType = "Others"
+            Case ManagePart_Layer.LayerType.NEWPART
+               Return "Create New Part"
+            Case ManagePart_Layer.LayerType.CHANGENAME
+               Return "Change Name"
+            Case ManagePart_Layer.LayerType.DELETE
+               Return "Delete Entity"
+         End Select
+         Dim PartName As String = ""
+         If Map.refManagePartPanelVM.ManagerPartList.Count > 1 Then
+            Dim NewPart As ManagePart_Part = Nothing
+            Select Case Map.refManagePartPanelVM.Type
+               Case ManagePartPanelVM.ManagePartType.IMPORT
+                  NewPart = Map.refManagePartPanelVM.ManagerPartList.FirstOrDefault(Function(x) x Is m_Part)
+               Case ManagePartPanelVM.ManagePartType.MODIFY
+                  NewPart = Map.refManagePartPanelVM.ManagerPartList.FirstOrDefault(Function(x) x.PrintPart.nPartId = m_GeomPart.nPartId)
+            End Select
+            If Not IsNothing(NewPart) Then
+               PartName = " (" & NewPart.sName & ")"
+            End If
+         End If
+         Return "Move to " & sType & PartName
+      End Get
+   End Property
+
+   ' Definizione comando
+   Private m_cmdCommand As ICommand
+
+   Sub New(OrigEntity As PartManager_GeomEntity, Type As ManagePart_Layer.LayerType, GeomPart As Print3dPartVM)
+      m_OrigEntity = OrigEntity
+      m_Type = Type
+      m_GeomPart = GeomPart
+   End Sub
+
+   Sub New(OrigEntity As PartManager_GeomEntity, Type As ManagePart_Layer.LayerType, Part As ManagePart_Part)
+      m_OrigEntity = OrigEntity
+      m_Type = Type
+      m_Part = Part
+   End Sub
+
+   Sub New(OrigEntity As PartManager_GeomEntity, Type As ManagePart_Layer.LayerType)
+      m_OrigEntity = OrigEntity
+      m_Type = Type
+   End Sub
+
+#Region "Command"
+
+   Public ReadOnly Property MenuItem_Command As ICommand
+      Get
+         If m_cmdCommand Is Nothing Then
+            m_cmdCommand = New Command(AddressOf Command)
+         End If
+         Return m_cmdCommand
+      End Get
+   End Property
+
+   Public Sub Command()
+      If m_Type = ManagePart_Layer.LayerType.CHANGENAME Then
+         m_OrigEntity.SetTextBoxVisibility(True)
+         Map.refManagePartPanelVM.SetIsEnabled(True)
+         Return
+      ElseIf m_Type = ManagePart_Layer.LayerType.DELETE Then
+         If MessageBox.Show("Are you sure you want to delete this entity?", "Delete confirmation", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+            EgtErase(m_OrigEntity.nId)
+            ' se l'entita' e' gia' in lista pezzi
+            If Not IsNothing(m_OrigEntity.OrigLayer) Then
+               ' elimino dalla lista pezzi
+               m_OrigEntity.OrigLayer.EntityList.Remove(m_OrigEntity)
+            Else
+               ' altrimenti lo elimino dalla lista entita' importate
+               Map.refManagePartPanelVM.ImportedEntityList.Remove(m_OrigEntity)
+            End If
+            EgtDraw()
+         End If
+         Return
+      ElseIf m_Type = ManagePart_Layer.LayerType.NEWPART Then
+         Select Case Map.refManagePartPanelVM.Type
+            Case ManagePartPanelVM.ManagePartType.IMPORT
+               Dim NewPart As ManagePart_Part = New ManagePart_Part(Nothing)
+               Map.refManagePartPanelVM.ManagerPartList.Add(NewPart)
+               ' elimino entity dalla lista entita' importate
+               Map.refManagePartPanelVM.ImportedEntityList.Remove(m_OrigEntity)
+               If Not IsNothing(NewPart) Then
+                  Dim NewLayer As ManagePart_Layer = NewPart.LayerList.FirstOrDefault(Function(x) x.Type = ManagePart_Layer.LayerType.PRINT_SOLID)
+                  If Not IsNothing(NewLayer) Then
+                     NewLayer.EntityList.Add(m_OrigEntity)
+                     ' aggiorno riferimenti nell'entita'
+                     m_OrigEntity.UpdateOrigLayer(NewLayer)
+                  End If
+               End If
+               ' aggiorno i contextmenu di tutti gli entity
+               Map.refManagePartPanelVM.UpdateAllEntityContextMenu()
+            Case ManagePartPanelVM.ManagePartType.MODIFY
+               ' recupero path da vecchio pezzo
+               Dim sFilePath As String = ""
+               EgtGetInfo(m_OrigEntity.OrigLayer.OrigPart.PrintPart.nPartId, FILE_PATH, sFilePath)
+               'Dim frImportedPart As New Frame3d
+               'EgtGetGroupGlobFrame(m_nImportedPartId, frImportedPart)
+               ' creo pezzo
+               Dim nPartId As Integer = EgtCreateGroup(GDB_ID.ROOT)  ', frImportedPart)
+               EgtSetName(nPartId, PART)
+               Dim nFrameId As Integer = GDB_ID.NULL
+               Dim b3PrintSolid As New BBox3d
+               ' creo layer solido di stampa
+               Dim nPrintPartLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nPrintPartLayerId, PRINT_SOLID)
+               EgtRelocateGlob(m_OrigEntity.nId, nPrintPartLayerId, GDB_POS.LAST_SON)
+               ' calcolo box superficie per creazione riferimento
+               EgtGetBBoxGlob(m_OrigEntity.nId, GDB_BB.STANDARD, b3PrintSolid)
+               ' coloro l'entita'
+               EgtSetColor(m_OrigEntity.nId, GeomEntityColors.c3Print)
+               ' creo layer mach start
+               Dim nMachStartLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nMachStartLayerId, LAY_MACH_START)
+               Dim nMachStartId As Integer = GDB_ID.NULL
+               ' creo punto di partenza
+               Dim ptStart As Point3d = b3PrintSolid.Center() - 0.6 * b3PrintSolid.DimY() * Vector3d.Y_AX() - 0.5 * b3PrintSolid.DimZ() * Vector3d.Z_AX()
+               nMachStartId = EgtCreateGeoPoint(nMachStartLayerId, ptStart, GDB_RT.GLOB)
+               EgtSetName(nMachStartId, START_GEOM)
+               ' coloro l'entita' di rosso
+               EgtSetColor(nMachStartId, GeomEntityColors.c3MachStart)
+               ' creo layer ribs
+               Dim nRibsLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nRibsLayerId, LAY_RIBS)
+               ' creo layer shell number
+               Dim nShellNumberLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nShellNumberLayerId, LAY_SHELL_NBR)
+               ' creo layer aux
+               Dim nAuxSolidsLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nAuxSolidsLayerId, LAY_AUX_SOLIDS)
+               ' creo layer others
+               Dim nOthersLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nOthersLayerId, LAY_OTHERS)
+               ' aggiungo riferimento
+               Dim nReferenceLayerId As Integer = EgtCreateGroup(nPartId)
+               EgtSetName(nReferenceLayerId, LAY_REFERENCE)
+               ' Creo riferimento 
+               Dim ptOrig As New Point3d(b3PrintSolid.Min())
+               Dim frPrintSolid As New Frame3d(ptOrig)
+               nFrameId = EgtCreateGeoFrame(nReferenceLayerId, frPrintSolid, GDB_RT.GLOB)
+               If nFrameId Then
+                  EgtSetName(nFrameId, FRAME_PART)
+                  EgtSetMode(nFrameId, GDB_MD.LOCKED)
+               End If
+               EgtSetInfo(nReferenceLayerId, KEY_REFERENCE, ReferenceBtn.References.BL)
+               ' appoggio il pezzo sulla tavola
+               EgtMove(nPartId, New Vector3d(0, 0, -b3PrintSolid.Min.z))
+               ' lo aggiungo a lista pezzi 
+               EgtSetInfo(nPartId, FILE_PATH, sFilePath)
+               EgtSetInfo(nPartId, "PartOnTable", 1)
+               Dim NewPart As New Print3dPartVM(nPartId, nPrintPartLayerId, nReferenceLayerId, nFrameId, nMachStartLayerId, nRibsLayerId, nShellNumberLayerId, nAuxSolidsLayerId, nOthersLayerId, sFilePath)
+               Map.refTopPanelVM.PartList.Add(NewPart)
+               Dim ManagePart_Part As ManagePart_Part = New ManagePart_Part(NewPart)
+               ' elimino da posizione originale
+               m_OrigEntity.OrigLayer.EntityList.Remove(m_OrigEntity)
+               'Dim bUpdateAllContextMenu As Boolean = False
+               'Dim NewLayer As ManagePart_Layer = ManagePart_Part.LayerList.FirstOrDefault(Function(x) x.Type = ManagePart_Layer.LayerType.PRINT_SOLID)
+               'If Not IsNothing(NewLayer) Then
+               '   NewLayer.EntityList.Add(m_OrigEntity)
+               '   ' aggiorno riferimenti nell'entita'
+               '   m_OrigEntity.UpdateOrigLayer(NewLayer)
+               'End If
+               EgtSetInfo(nPartId, PART_NAME, ManagePart_Part.sName)
+               ' lo aggiungo a lista
+               Map.refManagePartPanelVM.ManagerPartList.Add(ManagePart_Part)
+               ' aggiorno riferimenti nel context menu item
+               Map.refManagePartPanelVM.UpdateAllEntityContextMenu()
+         End Select
+         Return
+      End If
+      Select Case Map.refManagePartPanelVM.Type
+         Case ManagePartPanelVM.ManagePartType.IMPORT
+            ' se l'entita' e' gia' in lista pezzi
+            If Not IsNothing(m_OrigEntity.OrigLayer) Then
+               ' elimino dalla lista pezzi
+               m_OrigEntity.OrigLayer.EntityList.Remove(m_OrigEntity)
+            Else
+               ' altrimenti lo elimino dalla lista entita' importate
+               Map.refManagePartPanelVM.ImportedEntityList.Remove(m_OrigEntity)
+            End If
+            Dim NewPart As ManagePart_Part = Map.refManagePartPanelVM.ManagerPartList.FirstOrDefault(Function(x) x Is m_Part)
+            If Not IsNothing(NewPart) Then
+               Dim NewLayer As ManagePart_Layer = NewPart.LayerList.FirstOrDefault(Function(x) x.Type = m_Type)
+               If Not IsNothing(NewLayer) Then
+                  NewLayer.EntityList.Add(m_OrigEntity)
+                  ' aggiorno riferimenti nell'entita'
+                  m_OrigEntity.UpdateOrigLayer(NewLayer)
+               End If
+            End If
+            ' aggiorno riferimenti nel context menu item
+            m_OrigEntity.UpdateContextMenu()
+         Case ManagePartPanelVM.ManagePartType.MODIFY
+            ' recupero layer da pezzo
+            Dim nLayerId As Integer = GDB_ID.NULL
+            Select Case m_Type
+               Case ManagePart_Layer.LayerType.PRINT_SOLID
+                  nLayerId = m_GeomPart.nPrintSolidLayerId
+               Case ManagePart_Layer.LayerType.MACH_START
+                  nLayerId = m_GeomPart.nMachStartLayerId
+               Case ManagePart_Layer.LayerType.RIBS
+                  nLayerId = m_GeomPart.nRibsLayerId
+               Case ManagePart_Layer.LayerType.SHELL_NUMBER
+                  nLayerId = m_GeomPart.nShellNumberLayerId
+               Case ManagePart_Layer.LayerType.AUX_SOLIDS
+                  nLayerId = m_GeomPart.nAuxSolidsLayerId
+               Case ManagePart_Layer.LayerType.OTHERS
+                  nLayerId = m_GeomPart.nOthersLayerId
+            End Select
+            ' sposto entita'
+            If EgtRelocateGlob(m_OrigEntity.nId, nLayerId) Then
+               ' elimino info vecchio layer
+               Select Case m_OrigEntity.OrigLayer.Type
+                  Case ManagePart_Layer.LayerType.PRINT_SOLID
+                     EgtResetMark(m_OrigEntity.nId)
+                  Case ManagePart_Layer.LayerType.MACH_START
+                  Case ManagePart_Layer.LayerType.RIBS
+                     EgtRemoveInfo(m_OrigEntity.nId, KEY_RIB_TYPE)
+                  Case ManagePart_Layer.LayerType.SHELL_NUMBER
+                     EgtRemoveInfo(m_OrigEntity.nId, KEY_SHELLNBR_TYPE)
+                  Case ManagePart_Layer.LayerType.AUX_SOLIDS
+                     EgtRemoveInfo(m_OrigEntity.nId, KEY_AUXSOLID_TYPE)
+                  Case ManagePart_Layer.LayerType.OTHERS
+               End Select
+               ' sposto in lista
+               m_OrigEntity.OrigLayer.EntityList.Remove(m_OrigEntity)
+               Dim bUpdateAllContextMenu As Boolean = False
+               Dim NewPart As ManagePart_Part = Map.refManagePartPanelVM.ManagerPartList.FirstOrDefault(Function(x) x.PrintPart.nPartId = m_GeomPart.nPartId)
+               If Not IsNothing(NewPart) Then
+                  Dim NewLayer As ManagePart_Layer = NewPart.LayerList.FirstOrDefault(Function(x) x.Type = m_Type)
+                  If Not IsNothing(NewLayer) Then
+                     NewLayer.EntityList.Add(m_OrigEntity)
+                     bUpdateAllContextMenu = (m_OrigEntity.OrigLayer.Type = ManagePart_Layer.LayerType.PRINT_SOLID) OrElse (NewLayer.Type = ManagePart_Layer.LayerType.PRINT_SOLID)
+                     ' aggiorno riferimenti nell'entita'
+                     m_OrigEntity.UpdateOrigLayer(NewLayer)
+                  End If
+               End If
+               ' aggiungo info nuovo layer
+               Select Case m_Type
+                  Case ManagePart_Layer.LayerType.PRINT_SOLID
+                     EgtSetName(m_OrigEntity.nId, PRINT_SOLID)
+                     EgtSetColor(m_OrigEntity.nId, c3Print)
+                  Case ManagePart_Layer.LayerType.MACH_START
+                     EgtSetName(m_OrigEntity.nId, LAY_MACH_START)
+                     EgtSetColor(m_OrigEntity.nId, c3MachStart)
+                  Case ManagePart_Layer.LayerType.RIBS
+                     EgtSetName(m_OrigEntity.nId, LAY_RIBS)
+                     EgtSetInfo(m_OrigEntity.nId, KEY_RIB_TYPE, RibEntity.RibTypes.FROMIMPORT)
+                     EgtSetColor(m_OrigEntity.nId, c3Rib)
+                  Case ManagePart_Layer.LayerType.SHELL_NUMBER
+                     EgtSetName(m_OrigEntity.nId, LAY_SHELL_NBR)
+                     EgtSetInfo(m_OrigEntity.nId, KEY_SHELLNBR_TYPE, ShellNumberEntity.ShellNumberTypes.FROMIMPORT)
+                     EgtSetColor(m_OrigEntity.nId, c3ShellNumber)
+                  Case ManagePart_Layer.LayerType.AUX_SOLIDS
+                     EgtSetName(m_OrigEntity.nId, LAY_AUX_SOLIDS)
+                     EgtSetInfo(m_OrigEntity.nId, KEY_AUXSOLID_TYPE, RibEntity.RibTypes.FROMIMPORT)
+                     EgtSetColor(m_OrigEntity.nId, c3AuxSolids)
+                  Case ManagePart_Layer.LayerType.OTHERS
+                     EgtSetName(m_OrigEntity.nId, LAY_OTHERS)
+                     EgtSetColor(m_OrigEntity.nId, c3Others)
+               End Select
+               EgtDraw()
+               ' aggiorno riferimenti nel context menu item
+               If bUpdateAllContextMenu Then
+                  Map.refManagePartPanelVM.UpdateAllEntityContextMenu()
+               Else
+                  m_OrigEntity.UpdateContextMenu()
+               End If
+            End If
+      End Select
+   End Sub
+
+#End Region ' Command
+
+End Class
+
+Public Class ManagerPart_MenuItem
+   Inherits VMBase
+
+   Public Enum PartMenuCmd
+      CHANGENAME = 1
+      DELETE = 2
+   End Enum
+
+   Private m_OrigPart As ManagePart_Part
+
+   ' tipo del comando
+   Private m_Type As PartMenuCmd
+   Public Property Type As PartMenuCmd
+      Get
+         Return m_Type
+      End Get
+      Set(value As PartMenuCmd)
+         m_Type = value
+      End Set
+   End Property
+
+   Public ReadOnly Property sMsg As String
+      Get
+         Select Case m_Type
+            Case PartMenuCmd.CHANGENAME
+               Return "Change Name"
+            Case Else   ' PartMenuCmd.DELETE
+               Return "Delete Part"
+         End Select
+      End Get
+   End Property
+
+   ' Definizione comando
+   Private m_cmdCommand As ICommand
+
+   Sub New(OrigPart As ManagePart_Part, Type As PartMenuCmd)
+      m_OrigPart = OrigPart
+      m_Type = Type
+   End Sub
+
+#Region "Cancel"
+
+   Public ReadOnly Property MenuItem_Command As ICommand
+      Get
+         If m_cmdCommand Is Nothing Then
+            m_cmdCommand = New Command(AddressOf Command)
+         End If
+         Return m_cmdCommand
+      End Get
+   End Property
+
+   Public Sub Command()
+      Select Case m_Type
+         Case PartMenuCmd.CHANGENAME
+            m_OrigPart.SetTextBoxVisibility(True)
+            Map.refManagePartPanelVM.SetIsEnabled(True)
+         Case PartMenuCmd.DELETE
+            If Map.refManagePartPanelVM.ManagerPartList.Count <= 1 Then Return
+            Select Case Map.refManagePartPanelVM.Type
+               Case ManagePartPanelVM.ManagePartType.IMPORT
+                  For Each Layer In m_OrigPart.LayerList
+                     For Each Entity In Layer.EntityList
+                        ' le rimuovo da lista entita' pezzo
+                        Layer.EntityList.Remove(Entity)
+                        ' la rimetto in lista importati
+                        Map.refManagePartPanelVM.ImportedEntityList.Add(Entity)
+                     Next
+                  Next
+                  ' elimino pezzo da lista
+                  Map.refManagePartPanelVM.ManagerPartList.Remove(m_OrigPart)
+               Case ManagePartPanelVM.ManagePartType.MODIFY
+                  ' elimino pezzo geometrico
+                  EgtErase(m_OrigPart.PrintPart.nPartId)
+                  ' elimino pezzo da lista
+                  Map.refManagePartPanelVM.ManagerPartList.Remove(m_OrigPart)
+                  Dim bSelFirstPart As Boolean = m_OrigPart.PrintPart.nPartId = Map.refTopPanelVM.SelPart.nPartId
+                  ' elimino pezzo da lista Top
+                  Map.refTopPanelVM.PartList.Remove(m_OrigPart.PrintPart)
+                  EgtDraw()
+                  If bSelFirstPart Then Map.refTopPanelVM.SelFirstPart()
+            End Select
+            ' aggiorno riferimenti nel context menu item
+            Map.refManagePartPanelVM.UpdateAllEntityContextMenu()
+      End Select
+   End Sub
+
+#End Region ' Cancel
+
+End Class

Icarus/MaterialDb/Material.vb

@@ -204,7 +204,7 @@ Public Class Material
    End Sub
 
    Private Sub ReadAllParams()
-      'm_bSlicing45 = ReadMaterialParamDouble(m_nIndex, MAC_SLICING45, 0, CurrentMachine.sMachiningFilePath)
+      'm_nSlicingType = ReadMaterialParamDouble(m_nIndex, MAC_SLICINGTYPE, 0, CurrentMachine.sMachiningFilePath)
       'm_dStrandH = ReadMaterialParamDouble(m_nIndex, MAC_STRANDH, 0, CurrentMachine.sMachiningFilePath)
       'm_dStrandW = ReadMaterialParamDouble(m_nIndex, MAC_STRANDW, 0, CurrentMachine.sMachiningFilePath)
       'm_nStrandCount = ReadMaterialParamDouble(m_nIndex, MAC_STRANDCOUNT, 0, CurrentMachine.sMachiningFilePath)
@@ -871,16 +871,12 @@ Public Class CheckMaterialParam
    Sub New(Type As Params, nIndex As Integer)
       MyBase.New(Type)
       Select Case Type
-         'Case Params.SLICING45
-         '   m_bValue = ReadMaterialParamDouble(nIndex, MAC_SLICING45, 0)
       End Select
       m_bOrigValue = m_bValue
    End Sub
 
    Friend Overrides Sub WriteParamOnDb(nIndex As Integer)
       Select Case Type
-         'Case Params.SLICING45
-         '   WriteMaterialParam(nIndex, MAC_SLICING45, If(m_bValue, 1, 0))
       End Select
    End Sub
 

Icarus/My Project/AssemblyInfo.vb

@@ -60,5 +60,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.4.10.3")>
-<Assembly: AssemblyFileVersion("2.4.10.3")>
+<Assembly: AssemblyVersion("2.4.11.1")>
+<Assembly: AssemblyFileVersion("2.4.11.1")>

Icarus/ProjManager/ProjManagerVM.vb

@@ -162,6 +162,9 @@ Public Class ProjManagerVM
    End Sub
 
    Friend Sub NewProject(bDialog As Boolean)
+      ' Gestisco eventuale file corrente modificato
+      If Not Map.refSceneHostVM.MainController.ManageModified() Then Return
+      EgtResetModified()
       Dim NewProjMachine As Machine
       If bDialog AndAlso Map.refMachinePanelVM.MachineList.Count > 0 Then
          Dim ChooseMachineWndVM As New ChooseMachineWndVM

Icarus/RibPanel/RibPanelV.xaml

@@ -270,29 +270,17 @@
             <Image Source="/Resources/GridViewPanel/CplaneELEVATION.png" Stretch="Uniform"/>
          </Button>
          <Button Grid.Column="7" 
-                    Command="{Binding CPlaneRotate_Command}" 
-                    ToolTip="{Binding CPlaneRotateToolTip}" 
+                    Command="{Binding CPlaneOrigin_Command}" 
+                    ToolTip="{Binding CPlaneOriginToolTip}" 
                     Style="{StaticResource ToolBar_Button}">
-            <Image Source="/Resources/GridViewPanel/CplaneROTATE.png" Stretch="Uniform"/>
+            <Image Source="/Resources/GridViewPanel/CplaneORIGIN.png" Stretch="Uniform"/>
          </Button>
          <Button Grid.Column="8"
-                    Command="{Binding CPlane3P_Command}"
-                    ToolTip="{Binding CPlane3PToolTip}" 
-                    Style="{StaticResource ToolBar_Button}">
-            <Image Source="/Resources/GridViewPanel/CPlane3POINTS.png" Stretch="Uniform"/>
-         </Button>
-         <Button Grid.Column="9"
-                    Command="{Binding CPlanePerpObj_Command}"
-                    ToolTip="{Binding CPlanePerpObjToolTip}" 
-                    Style="{StaticResource ToolBar_Button}">
-            <Image Source="/Resources/GridViewPanel/CPlanePERPCURVE.png" Stretch="Uniform"/>
-         </Button>
-         <!--<Button Grid.Column="10"
                     Command="{Binding CPlaneObj_Command}"
                     ToolTip="{Binding CPlaneObjToolTip}" 
                     Style="{StaticResource ToolBar_Button}">
                <Image Source="/Resources/GridViewPanel/CplaneOBJECT.png" Stretch="Uniform"/>
-            </Button>-->
+            </Button>
       </Grid>
    </Border>
    <!--<Popup IsOpen="{Binding IsChecked, ElementName=GridBtn}"

Icarus/RibPanel/RibPanelVM.vb

@@ -612,7 +612,18 @@ Public Class RibPanelVM
 
    Friend Sub OnKeyDown(Key As Forms.Keys)
       If Key = Forms.Keys.Escape Then
-
+         ' se attiva, disattivo griglia su oggetto
+         If m_bCPlaneObj_IsActive Then
+            m_bCPlaneObj_IsActive = False
+            ResetCPlaneObjIsActive()
+            ' ripristino selezioni precedenti
+            For Each Id In Map.refShellNumberPanelVM.PrevSelObjs
+               EgtSelectObj(Id)
+            Next
+            EgtDraw()
+            ' rimetto la selezione scena a null
+            Map.refSceneHostVM.MainScene.SetStatusNull()
+         End If
       End If
    End Sub
 
@@ -1117,6 +1128,22 @@ Public Class RibPanelVM
 
 #Region "CPlaneObj"
 
+   Private m_bCPlaneObj_IsActive As Boolean = False
+   Friend ReadOnly Property bCPlaneObj_IsActive As Boolean
+      Get
+         Return m_bCPlaneObj_IsActive
+      End Get
+   End Property
+   Friend Sub ResetCPlaneObjIsActive()
+      m_bCPlaneObj_IsActive = False
+   End Sub
+   Private m_PrevSelObjs As New List(Of Integer)
+   Friend ReadOnly Property PrevSelObjs As List(Of Integer)
+      Get
+         Return m_PrevSelObjs
+      End Get
+   End Property
+
    ''' <summary>
    ''' Returns a command that do CPlanepObj.
    ''' </summary>
@@ -1134,7 +1161,15 @@ Public Class RibPanelVM
    ''' </summary>
    Public Sub CPlaneObj(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 Then Return
-      Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_OBJ)
+      ' salvo selezione precedente e deseleziono altri oggetti
+      Dim nSelObjId As Integer = EgtGetFirstSelectedObj()
+      While nSelObjId <> GDB_ID.NULL
+         m_PrevSelObjs.Add(nSelObjId)
+         nSelObjId = EgtGetNextSelectedObj()
+      End While
+      EgtDeselectAll()
+      m_bCPlaneObj_IsActive = True
+    '  Map.refControllerInputPanelVM.PrepareInputBox("Grid from Selection", "Select the face of the object where to place the grid", "", False, False)
    End Sub
 
 #End Region ' CPlaneObj

Icarus/RibParamPanel/RibParamPanelV.xaml

@@ -58,7 +58,7 @@
                            <Button Grid.Column="2"
                                     Content="R"
                                     Command="{Binding ResetParam_Command}"
-                                    IsEnabled="{Binding bIsModifiedFromDb}"
+                                    IsEnabled="{Binding bIsModifiedFromPart}"
                                     VerticalContentAlignment="Center"
                                     HorizontalContentAlignment="Center"
                                     Margin="5,0,0,0"
@@ -80,7 +80,7 @@
                            <Button Grid.Column="2"
                                     Content="R"
                                     Command="{Binding ResetParam_Command}"
-                                    IsEnabled="{Binding bIsModifiedFromDb}"
+                                    IsEnabled="{Binding bIsModifiedFromPart}"
                                     VerticalContentAlignment="Center"
                                     HorizontalContentAlignment="Center"
                                     Margin="5,0,0,0"

Icarus/RibParamPanel/RibParamPanelVM.vb

@@ -41,12 +41,13 @@ Public Class RibParamPanelVM
 
       m_Type = Cathegories.RIBS
       m_sName = "Ribs"
-      m_MachiningParamList = New List(Of MachiningParam)({New RibNumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nRibId, nPartId),
+      m_MachiningParamList = New List(Of MachiningParam)({New RibComboMachiningParam(MachiningParam.Params.RIBSTYPE, nRibId, nPartId),
+                                                          New RibNumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nRibId, nPartId),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSSTRANDCOUNT, nRibId, nPartId),
-                                                          New RibNumericMachiningParam(MachiningParam.Params.RIBSINVERTDIRECTION, nRibId, nPartId),
-                                                          New RibNumericMachiningParam(MachiningParam.Params.RIBSLEADININVERT, nRibId, nPartId),
+                                                          New RibCheckMachiningParam(MachiningParam.Params.RIBSINVERTDIRECTION, nRibId, nPartId),
+                                                          New RibCheckMachiningParam(MachiningParam.Params.RIBSLEADININVERT, nRibId, nPartId),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSLEADINLEN, nRibId, nPartId),
-                                                          New RibNumericMachiningParam(MachiningParam.Params.RIBSLEADOUTINVERT, nRibId, nPartId),
+                                                          New RibCheckMachiningParam(MachiningParam.Params.RIBSLEADOUTINVERT, nRibId, nPartId),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSLEADOUTLEN, nRibId, nPartId),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSLEADOUTCOASTING, nRibId, nPartId),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSLEADOUTWIPE, nRibId, nPartId),
@@ -70,9 +71,21 @@ Public Class RibParamPanelVM
    Friend Sub WriteParamsInRib(nRibId As Integer)
       ' se parametri modificati
       Dim bModified As Boolean = False
-      For Each Param As RibNumericMachiningParam In m_MachiningParamList
-         If Param.bIsModified AndAlso Not bModified Then bModified = True
-         Param.WriteParamInRib(nRibId)
+      For Each Param In m_MachiningParamList
+         Select Case Param.GetType()
+            Case GetType(RibNumericMachiningParam)
+               Dim NumericParam As RibNumericMachiningParam = TryCast(Param, RibNumericMachiningParam)
+               If NumericParam.bIsModified AndAlso Not bModified Then bModified = True
+               NumericParam.WriteParamInRib(nRibId)
+            Case GetType(RibComboMachiningParam)
+               Dim ComboParam As RibComboMachiningParam = TryCast(Param, RibComboMachiningParam)
+               If ComboParam.bIsModified AndAlso Not bModified Then bModified = True
+               ComboParam.WriteParamInRib(nRibId)
+            Case GetType(RibCheckMachiningParam)
+               Dim CheckParam As RibCheckMachiningParam = TryCast(Param, RibCheckMachiningParam)
+               If CheckParam.bIsModified AndAlso Not bModified Then bModified = True
+               CheckParam.WriteParamInRib(nRibId)
+         End Select
       Next
       If bModified Then
          ' Imposto flag di ricalcolo slice
@@ -324,4 +337,226 @@ Public Class RibNumericMachiningParam
 
 #End Region    ' COMMANDS
 
+End Class
+
+Public Class RibComboMachiningParam
+   Inherits ComboMachiningParam
+
+   Public Overrides Property SelValue As IdNameStruct
+      Get
+         Return m_SelValue
+      End Get
+      Set(value As IdNameStruct)
+         m_SelValue = value
+         NotifyPropertyChanged(NameOf(SelValue))
+         NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+      End Set
+   End Property
+
+   Protected m_PartSelValue As IdNameStruct
+   Public ReadOnly Property PartSelValue As IdNameStruct
+      Get
+         Return m_PartSelValue
+      End Get
+   End Property
+
+   Public ReadOnly Property bIsModifiedFromPart As Boolean
+      Get
+         Return m_SelValue.Id <> m_PartSelValue.Id
+      End Get
+   End Property
+
+   ' Definizione comandi
+   Private m_cmdResetParam As ICommand
+
+   Sub New(Type As Params, nRibId As Integer, nPartId As Integer)
+      MyBase.New(Type)
+      Dim bReadFromRib As Boolean = False
+      Dim bReadFromPart As Boolean = False
+      Select Case Type
+         Case Params.RIBSTYPE
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_RIBSTYPE.INTERNAL, "Internal"),
+                                                     New IdNameStruct(Machining.MPAR_RIBSTYPE.EXTERNAL, "External"),
+                                                     New IdNameStruct(Machining.MPAR_RIBSTYPE.UNBOUNDED, "Unbounded")})
+            Dim nSelValue As Integer = 1
+            bReadFromRib = EgtGetInfo(nRibId, MAC_RIBSTYPE, nSelValue)
+            If bReadFromRib Then
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+            End If
+            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSTYPE, nSelValue)
+            m_PartSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+      End Select
+      m_OrigSelValue = m_SelValue
+      If Not bReadFromRib Then
+         If bReadFromPart Then
+            m_SelValue = m_PartSelValue
+            m_OrigSelValue = m_PartSelValue
+         ElseIf Type = Params.RIBSTYPE Then
+            m_OrigSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = Machining.MPAR_RIBSTYPE.INTERNAL)
+            m_SelValue = m_OrigSelValue
+         End If
+      End If
+   End Sub
+
+   Friend Sub WriteParamInRib(nRibId As Integer)
+      Select Case Type
+         Case Params.RIBSTYPE
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nRibId, MAC_RIBSTYPE, m_SelValue.Id)
+            Else
+               EgtRemoveInfo(nRibId, MAC_RIBSTYPE)
+            End If
+      End Select
+   End Sub
+
+   Friend Overrides Sub SaveParam()
+      m_OrigSelValue = m_SelValue
+   End Sub
+
+   Friend Overrides Sub ResetParam()
+      m_SelValue = m_OrigSelValue
+   End Sub
+
+#Region "COMMANDS"
+
+#Region "ResetParam"
+
+   Public ReadOnly Property ResetParam_Command As ICommand
+      Get
+         If m_cmdResetParam Is Nothing Then
+            m_cmdResetParam = New Command(AddressOf ResetParamCmd)
+         End If
+         Return m_cmdResetParam
+      End Get
+   End Property
+
+   Public Sub ResetParamCmd()
+      m_SelValue = m_PartSelValue
+      NotifyPropertyChanged(NameOf(SelValue))
+      NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+   End Sub
+
+#End Region    ' ResetParam
+
+#End Region    ' COMMANDS
+
+
+End Class
+
+Public Class RibCheckMachiningParam
+   Inherits CheckMachiningParam
+
+   Public Overrides Property bValue As Boolean
+      Get
+         Return m_bValue
+      End Get
+      Set(value As Boolean)
+         m_bValue = value
+         NotifyPropertyChanged(NameOf(bValue))
+         NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+      End Set
+   End Property
+
+   Protected m_bPartValue As Boolean
+   Public ReadOnly Property bPartValue As Boolean
+      Get
+         Return m_bPartValue
+      End Get
+   End Property
+
+   Public ReadOnly Property bIsModifiedFromPart As Boolean
+      Get
+         Return m_bValue <> m_bPartValue
+      End Get
+   End Property
+
+   ' Definizione comandi
+   Private m_cmdResetParam As ICommand
+
+   Sub New(Type As Params, nRibId As Integer, nPartId As Integer)
+      MyBase.New(Type)
+      Dim bReadFromPart As Boolean = False
+      Select Case Type
+         'Case Params.RIBSLINK
+         '   bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSLINK, m_bValue)
+         '   EgtGetInfo(nPartId, MAC_RIBSOVERLAP, m_bPartValue)
+         Case Params.RIBSINVERTDIRECTION
+            bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSINVERTDIRECTION, m_bValue)
+            EgtGetInfo(nPartId, MAC_RIBSINVERTDIRECTION, m_bPartValue)
+         Case Params.RIBSLEADININVERT
+            bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSLEADININVERT, m_bValue)
+            EgtGetInfo(nPartId, MAC_RIBSLEADININVERT, m_bPartValue)
+         Case Params.RIBSLEADOUTINVERT
+            bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSLEADOUTINVERT, m_bValue)
+            EgtGetInfo(nPartId, MAC_RIBSLEADOUTINVERT, m_bPartValue)
+      End Select
+      m_bOrigValue = m_bValue
+      If Not bReadFromPart Then
+         m_bValue = m_bPartValue
+         m_bOrigValue = m_bPartValue
+      End If
+   End Sub
+
+   Friend Sub WriteParamInRib(nRibId As Integer)
+      Select Case Type
+         'Case Params.RIBSLINK
+         '   If bIsModifiedFromPart Then
+         '      EgtSetInfo(nRibId, MAC_RIBSLINK, If(m_bValue, 1, 0))
+         '   Else
+         '      EgtRemoveInfo(nRibId, MAC_RIBSLINK)
+         '   End If
+         Case Params.RIBSINVERTDIRECTION
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nRibId, MAC_RIBSINVERTDIRECTION, If(m_bValue, 1, 0))
+            Else
+               EgtRemoveInfo(nRibId, MAC_RIBSINVERTDIRECTION)
+            End If
+         Case Params.RIBSLEADININVERT
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nRibId, MAC_RIBSLEADININVERT, If(m_bValue, 1, 0))
+            Else
+               EgtRemoveInfo(nRibId, MAC_RIBSLEADININVERT)
+            End If
+         Case Params.RIBSLEADOUTINVERT
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nRibId, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0))
+            Else
+               EgtRemoveInfo(nRibId, MAC_RIBSLEADOUTINVERT)
+            End If
+      End Select
+   End Sub
+
+   Friend Overrides Sub SaveParam()
+      m_bOrigValue = m_bValue
+   End Sub
+
+   Friend Overrides Sub ResetParam()
+      m_bValue = m_bOrigValue
+      NotifyPropertyChanged(NameOf(bValue))
+   End Sub
+
+#Region "COMMANDS"
+
+#Region "ResetParam"
+
+   Public ReadOnly Property ResetParam_Command As ICommand
+      Get
+         If m_cmdResetParam Is Nothing Then
+            m_cmdResetParam = New Command(AddressOf ResetParamCmd)
+         End If
+         Return m_cmdResetParam
+      End Get
+   End Property
+
+   Public Sub ResetParamCmd()
+      m_bValue = m_bPartValue
+      NotifyPropertyChanged(NameOf(bValue))
+      NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+   End Sub
+
+#End Region    ' ResetParam
+
+#End Region    ' COMMANDS
+
+
 End Class

Icarus/SceneHost/MySceneHostVM.vb

@@ -187,12 +187,13 @@ Public Class MySceneHostVM
       MainController.SetSurfTmTolerance(0.05)
       MainController.SetUseCustomColors(True, S_SCENE, K_CUSTOMCOLORS)
       ' imposto unità di misura per interfaccia utente
-      Dim bMmUnits As Boolean = (GetMainPrivateProfileInt(S_SCENE, K_MMUNITS, 1) <> 0)
+      Dim bMmUnits As Boolean = GetMainPrivateProfileInt(S_SCENE, K_MMUNITS, 1) <> 0
       EgtSetUiUnits(bMmUnits)
       'Map.refMyStatusBarVM.SetMeasureUnit(nMeasureUnit <> 0)
       ' imposto visualizzazione riferimento globale
       EgtSetGlobFrameShow(True)
       ' imposto i dati della griglia
+      Dim bGridVisibility As Boolean = (GetMainPrivateProfileInt(S_GRID, K_SHOWGRID, 1) <> 0)
       Dim dSnapStepMm As Double = GetMainPrivateProfileDouble(S_GRID, K_SNAPSTEP, 10)
       Dim dSnapStepInch As Double = GetMainPrivateProfileDouble(S_GRID, K_SNAPSTEPINCH, 10)
       Dim nMinLineSStep As Integer = GetMainPrivateProfileInt(S_GRID, K_MINLINESSTEP, 1)
@@ -209,15 +210,15 @@ Public Class MySceneHostVM
          EgtSetGridGeo(dSnapStepInch, nMinLineSStep, nMajLineSStep, nExtSStep)
       End If
       EgtSetGridColor(MinLnColor, MajLnColor)
-      EgtSetGridShow(True, False)
+      EgtSetGridShow(bGridVisibility, bGridVisibility)
       ' imposto tipo coordinate
       MainScene.SetGridCursorPos(True)
-      ' modo di visualizzazione
-      Dim nShowMode As Integer = GetMainPrivateProfileInt(S_SCENE, K_SHOWMODE, SM.SHADING)
-      'Map.refShowPanelVM.SetShowMode(DirectCast(nShowMode, SM))
       ' visualizzazione avanzata dei triangoli costituenti le superfici
       Dim bShowTriaAdv As Boolean = (GetMainPrivateProfileInt(S_SCENE, K_SHOWTRIAADV, 1) <> 0)
       EgtSetShowTriaAdv(bShowTriaAdv)
+      ' visualizzazione direzione curve
+      Dim bShowCurveDirection As Boolean = (GetMainPrivateProfileInt(S_SCENE, K_CURVEDIR, 0) <> 0)
+      EgtSetShowCurveDirection(bShowCurveDirection)
       ' tipo visualizzazione per Zmap
       Dim nShowZmap As Integer = GetMainPrivateProfileInt(S_SCENE, K_SHOWZMAP, 1)
       EgtSetShowZmap(DirectCast(nShowZmap, ZSM), False)
@@ -225,7 +226,7 @@ Public Class MySceneHostVM
       Dim nTxrMaxLinPix As Integer = GetMainPrivateProfileInt(S_SCENE, K_TEXMAXLINPIX, 4096)
       EgtSetTextureMaxLinPixels(nTxrMaxLinPix)
       ' tipo snap point
-      MainScene.SetSnapPointType(SP.PT_SKETCH)
+      MainScene.SetSnapPointType(SP.PT_GRID)
       ' nascondo input box
       'Map.refFreeContourInputVM.ResetInputBox()
    End Sub
@@ -308,6 +309,7 @@ Public Class MySceneHostVM
          sDir = Path.GetDirectoryName(sDir)
       End If
       If Not Directory.Exists(sDir) Then sDir = ""
+      Dim ExtIndex As Integer = GetMainPrivateProfileInt(S_PRINTING3D, K_IMPORTCURREXTENSION, 1)
       Dim OpenFileDialog As New OpenFileDialog With {.Title = "Insert",
                                                      .Filter = "Stereolithography (*.stl)|*.stl" &
                                                                "|Iges files (*.igs;*.iges)|*.igs;*.iges" &
@@ -315,11 +317,12 @@ Public Class MySceneHostVM
                                                                "|3D Manufacturing format (*.3mf)|*.3mf" &
                                                                "|New geometry EgalTech(*.nge)|*.nge" &
                                                                "|All Files (*.*)|*.*",
-                                                     .FilterIndex = 1,
+                                                     .FilterIndex = ExtIndex,
                                                      .InitialDirectory = sDir}
       If Not OpenFileDialog.ShowDialog Then
          Return
       End If
+      WriteMainPrivateProfileString(S_PRINTING3D, K_IMPORTCURREXTENSION, OpenFileDialog.FilterIndex)
       Dim sFile As String = String.Empty
       sFile = OpenFileDialog.FileName
       ' importo la nuova geometria
@@ -842,11 +845,16 @@ Public Class MySceneHostVM
       If Not bOk Then
          MessageBox.Show(Application.Current.MainWindow, EgtMsg(10002), EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)  ' Error on new file  - Error
       End If
+
       Map.refTopPanelVM.PartList.Clear()
       Map.refTopPanelVM.SetSelModifyMode(ModifyModes.NULL)
       Map.refSliceManagerVM.UpdateTimeAndMass()
       Map.refSliderManagerVM.RefreshSlider(0, 0)
       Map.refSliderManagerVM.SetLayerIndexToMax()
+
+      ' resetto calcolo solidi
+      Map.refViewLayerManagerVM.ResetSolid()
+
       EgtZoom(ZM.ALL)
       MainScene.SetStatusNull()
    End Sub
@@ -865,9 +873,20 @@ Public Class MySceneHostVM
          End If
          MessageBox.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)        'Error
       End If
-      ' leggo materiale
+      ' leggo materiale e macchina
       Dim nTabPartId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, TABLE)
       If nTabPartId <> GDB_ID.NULL Then
+         Dim sMachineName As String = ""
+         if Not EgtGetInfo(nTabPartId, KEY_MACHINE_NAME, sMachineName) Then sMachineName = "Cms-Kreator" 
+         Dim ProjectMachine As Machine = Map.refMachinePanelVM.MachineList.FirstOrDefault(Function(x) x.Name = sMachineName)
+         If Not IsNothing(ProjectMachine) Then
+            ' imposto la macchina
+            Map.refMachinePanelVM.SelectedMachine = ProjectMachine
+         Else
+            MessageBox.Show("Project machine not found! Impossible to open the project.", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+            Map.refProjManagerVM.NewProject(False)
+            Return
+         End If
          Dim sMaterialGuid As String = ""
          EgtGetInfo(nTabPartId, KEY_MATERIAL_GUID, sMaterialGuid)
          Dim MaterialGuid As Guid
@@ -881,7 +900,7 @@ Public Class MySceneHostVM
             ProjectMaterial = Map.refTopPanelVM.MaterialList.FirstOrDefault(Function(x) x.sName = sMaterialName)
          End If
          If Not IsNothing(ProjectMaterial) Then
-            Map.refTopPanelVM.SelMaterial = ProjectMaterial
+            Map.refTopPanelVM.SetSelMaterial(ProjectMaterial, True)
             Map.refTopPanelVM.NotifyPropertyChanged(NameOf(Map.refTopPanelVM.SelMaterial))
          End If
       End If
@@ -897,7 +916,6 @@ Public Class MySceneHostVM
          End If
          Dim nPrintPartLayerId As Integer = EgtGetFirstNameInGroup(nPartId, PRINT_SOLID)
          Dim nPrintPartId As Integer = EgtGetFirstInGroup(nPrintPartLayerId)
-         Dim nOriginalPartLayerId As Integer = EgtGetFirstNameInGroup(nPartId, ORIGINAL_SOLID)
          Dim nRibsLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_RIBS)
          Dim nShellNumberLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_SHELL_NBR)
          Dim nAuxSolidsLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_AUX_SOLIDS)
@@ -907,7 +925,7 @@ Public Class MySceneHostVM
          EgtGetInfo(nPartId, FILE_PATH, sFilePath)
          Dim nReferenceLayerId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_REFERENCE)
          Dim nFrameId As Integer = EgtGetFirstInGroup(nReferenceLayerId)
-         Dim NewPart As New Print3dPartVM(nPartId, nPrintPartLayerId, nPrintPartId, nOriginalPartLayerId, nReferenceLayerId, nFrameId, nMachStartLayerId, nRibsLayerId, nShellNumberLayerId, nAuxSolidsLayerId, nOthersLayerId, sFilePath)
+         Dim NewPart As New Print3dPartVM(nPartId, nPrintPartLayerId, nReferenceLayerId, nFrameId, nMachStartLayerId, nRibsLayerId, nShellNumberLayerId, nAuxSolidsLayerId, nOthersLayerId, sFilePath)
          Map.refTopPanelVM.PartList.Add(NewPart)
          Dim bPartToRecalc As Boolean = False
          EgtGetInfo(nPartId, MAC_TORECALC_SLICE, bPartToRecalc)
@@ -932,6 +950,9 @@ Public Class MySceneHostVM
       ' seleziono primo pezzo trovato
       Map.refTopPanelVM.SelFirstPart()
 
+      ' resetto calcolo solidi
+      Map.refViewLayerManagerVM.ResetSolid()
+
       ' imposto modalita' modifica
       Map.refTopPanelVM.SelPage = Pages.MODIFY
 
@@ -1155,7 +1176,7 @@ Public Class MySceneHostVM
       While nId <> GDB_ID.NULL
          ' Recupero l'identificativo del pezzo cui appartiene
          Dim nPartId As Integer = EgtGetParent(EgtGetParent(nId))
-         If nPartId = Map.refImportPanelVM.nImportedPartId Then
+         If nPartId = Map.refManagePartPanelVM.nImportedPartId Then
             Dim EntityType As GDB_TY = EgtGetType(nId)
             Select Case EntityType
                Case GDB_TY.CRV_ARC, GDB_TY.CRV_BEZ, GDB_TY.CRV_COMPO, GDB_TY.CRV_LINE
@@ -1205,7 +1226,7 @@ Public Class MySceneHostVM
       If Not m_bDragToStart Then
          ' Se selezione da eseguire
       ElseIf m_nIdToSel <> GDB_ID.NULL Then
-         Map.refImportPanelVM.SetSelImportedEntity(m_nIdToSel)
+         Map.refManagePartPanelVM.SetSelImportedEntity(m_nIdToSel)
       End If
       ' Reset
       m_bDrag = False
@@ -1224,19 +1245,35 @@ Public Class MySceneHostVM
       EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSel)
       Dim nId As Integer = EgtGetFirstObjInSelWin()
       While nId <> GDB_ID.NULL
-         ' Recupero l'identificativo del pezzo cui appartiene
-         Dim nPartId As Integer = EgtGetParent(nId)
-         Dim bFound As Boolean = False
-         If nPartId = Map.refStartMachPanelVM.nStartMachLayerId Then bFound = True
-         If Not bFound Then
-            nId = EgtGetNextObjInSelWin()
-            Continue While
+         ' Se per Griglia da faccia di oggetto
+         If Map.refStartMachPanelVM.bCPlaneObj_IsActive Then
+            If EgtGetType( nId) = GDB_TY.SRF_MESH Then
+               m_nIdToSel = nId
+               Exit While
+            End If
+         Else
+            ' Recupero l'identificativo del pezzo cui appartiene
+            Dim nPartId As Integer = EgtGetParent(nId)
+            Dim bFound As Boolean = False
+            If nPartId = Map.refStartMachPanelVM.nStartMachLayerId Then bFound = True
+            If bFound Then
+               m_nIdToSel = nId
+               Exit While
+            End If
          End If
-         ' Memorizzo Id da selezionare
-         m_nIdToSel = nId
-         Exit While
          nId = EgtGetNextObjInSelWin()
       End While
+      If m_nIdToSel <> GDB_ID.NULL Then
+         ' recupero dati punto di selezione
+         Dim PtTemp As Point3d
+         Dim nAux As Integer
+         If EgtGetPointFromSelect(m_nIdToSel, e.Location, PtTemp, nAux) Then
+            ' eseguo la selezione
+            EgtSelectObj(m_nIdToSel)
+            ' dati ausiliari
+            EgtSetSelInfo(m_nIdToSel, nAux, PtTemp)
+         End If
+      End If
       ' Dati per drag
       m_bDragToStart = True
    End Sub
@@ -1257,10 +1294,22 @@ Public Class MySceneHostVM
    Friend Sub StartMach_OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Se eseguito drag
       If Not m_bDragToStart Then
-         ' Se selezione da eseguire
+
+      ' Se selezione da eseguire
       ElseIf m_nIdToSel <> GDB_ID.NULL Then
-         ' Eseguo la selezione
-         Map.refStartMachPanelVM.SelStartFromId(m_nIdToSel)
+         If Map.refStartMachPanelVM.bCPlaneObj_IsActive Then
+            ' eseguo comando
+            Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_OBJ)
+            Map.refStartMachPanelVM.ResetCPlaneObjIsActive()
+            ' ripristino selezioni precedenti
+            For Each Id In Map.refStartMachPanelVM.PrevSelObjs
+               EgtSelectObj(Id)
+            Next
+            Map.refControllerInputPanelVM.ResetInputBox()
+         Else
+            ' Eseguo la selezione
+            Map.refStartMachPanelVM.SelStartFromId(m_nIdToSel)
+         End If
       End If
       ' Reset
       m_bDrag = False
@@ -1280,19 +1329,35 @@ Public Class MySceneHostVM
       EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSel)
       Dim nId As Integer = EgtGetFirstObjInSelWin()
       While nId <> GDB_ID.NULL
-         ' Recupero l'identificativo del pezzo cui appartiene
-         Dim nPartId As Integer = EgtGetParent(nId)
-         Dim bFound As Boolean = False
-         If nPartId = Map.refRibPanelVM.nRibLayerId Then bFound = True
-         If Not bFound Then
-            nId = EgtGetNextObjInSelWin()
-            Continue While
+         ' Se per Griglia da faccia di oggetto
+         If Map.refRibPanelVM.bCPlaneObj_IsActive Then
+            If EgtGetType( nId) = GDB_TY.SRF_MESH Then
+               m_nIdToSel = nId
+               Exit While
+            End If
+         Else
+            ' Recupero l'identificativo del pezzo cui appartiene
+            Dim nPartId As Integer = EgtGetParent(nId)
+            Dim bFound As Boolean = False
+            If nPartId = Map.refRibPanelVM.nRibLayerId Then bFound = True
+            If bFound Then
+               m_nIdToSel = nId
+               Exit While
+            End If
          End If
-         ' Memorizzo Id da selezionare
-         m_nIdToSel = nId
-         Exit While
          nId = EgtGetNextObjInSelWin()
       End While
+      If m_nIdToSel <> GDB_ID.NULL Then
+         ' recupero dati punto di selezione
+         Dim PtTemp As Point3d
+         Dim nAux As Integer
+         If EgtGetPointFromSelect(m_nIdToSel, e.Location, PtTemp, nAux) Then
+            ' eseguo la selezione
+            EgtSelectObj(m_nIdToSel)
+            ' dati ausiliari
+            EgtSetSelInfo(m_nIdToSel, nAux, PtTemp)
+         End If
+      End If
       ' Dati per drag
       m_bDragToStart = True
    End Sub
@@ -1313,10 +1378,22 @@ Public Class MySceneHostVM
    Friend Sub Rib_OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Se eseguito drag
       If Not m_bDragToStart Then
-         ' Se selezione da eseguire
+
+      ' Se selezione da eseguire
       ElseIf m_nIdToSel <> GDB_ID.NULL Then
-         ' Eseguo la selezione
-         Map.refRibPanelVM.SelStartFromId(m_nIdToSel)
+         If Map.refRibPanelVM.bCPlaneObj_IsActive Then
+            ' eseguo comando
+            Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_OBJ)
+            Map.refRibPanelVM.ResetCPlaneObjIsActive()
+            ' ripristino selezioni precedenti
+            For Each Id In Map.refRibPanelVM.PrevSelObjs
+               EgtSelectObj(Id)
+            Next
+            Map.refControllerInputPanelVM.ResetInputBox()
+         Else
+            ' Eseguo la selezione
+            Map.refRibPanelVM.SelStartFromId(m_nIdToSel)
+         End If
       End If
       ' Reset
       m_bDrag = False
@@ -1330,6 +1407,7 @@ Public Class MySceneHostVM
 #Region "ShellNumber"
 
    Friend Sub ShellNumber_OnMouseDownScene(sender As Object, e As Forms.MouseEventArgs)
+      m_nIdToSel = GDB_ID.NULL
       ' Verifico se selezionato indicativo di pezzo
       EgtSetObjFilterForSelWin(True, True, True, True, True)
       Dim nSel As Integer
@@ -1340,15 +1418,23 @@ Public Class MySceneHostVM
          Dim nPartId As Integer = EgtGetParent(nId)
          Dim bFound As Boolean = False
          If nPartId = Map.refShellNumberPanelVM.nShellNumberLayerId Then bFound = True
-         If Not bFound Then
-            nId = EgtGetNextObjInSelWin()
-            Continue While
+         If bFound Then
+            m_nIdToSel = nId
+            Exit While
          End If
-         ' Memorizzo Id da selezionare
-         m_nIdToSel = nId
-         Exit While
          nId = EgtGetNextObjInSelWin()
       End While
+      If m_nIdToSel <> GDB_ID.NULL Then
+         ' recupero dati punto di selezione
+         Dim PtTemp As Point3d
+         Dim nAux As Integer
+         If EgtGetPointFromSelect(m_nIdToSel, e.Location, PtTemp, nAux) Then
+            ' eseguo la selezione
+            EgtSelectObj(m_nIdToSel)
+            ' dati ausiliari
+            EgtSetSelInfo(m_nIdToSel, nAux, PtTemp)
+         End If
+      End If
       ' Dati per drag
       m_bDragToStart = True
    End Sub
@@ -1369,11 +1455,10 @@ Public Class MySceneHostVM
    Friend Sub ShellNumber_OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Se eseguito drag
       If Not m_bDragToStart Then
-         ' Se selezione da eseguire
+
+      ' Se selezione da eseguire
       ElseIf m_nIdToSel <> GDB_ID.NULL Then
          If Map.refShellNumberPanelVM.bCPlaneObj_IsActive Then
-            ' eseguo la selezione
-            EgtSelectObj(m_nIdToSel)
             ' eseguo comando
             Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_OBJ)
             Map.refShellNumberPanelVM.ResetCPlaneObjIsActive()

Icarus/SecondaryWindow/SecondaryWindowV.xaml.vb

@@ -4,6 +4,12 @@ Imports EgtUILib
 Public Class SecondaryWindowV
 
    Private m_SecondaryWindowVM As SecondaryWindowVM
+   Private m_WindowChangingState As Boolean = False
+   Public ReadOnly Property WindowChangingState As Boolean
+      Get
+         Return m_WindowChangingState
+      End Get
+   End Property
 
 #Region "CONSTRUCTOR"
 
@@ -55,9 +61,11 @@ Public Class SecondaryWindowV
    End Sub
 
    Private Sub SecondaryWindowV_StateChanged(sender As Object, e As EventArgs)
+      m_WindowChangingState = True
       Application.Current.MainWindow.WindowState = Me.WindowState
       Application.Current.MainWindow.Topmost = True
       Application.Current.MainWindow.Topmost = False
+      m_WindowChangingState = False
    End Sub
 
 #End Region    ' CONSTRUCTOR

Icarus/SecondaryWindow/SecondaryWindowVM.vb

@@ -83,10 +83,10 @@ Public Class SecondaryWindowVM
    End Sub
 
    Private Sub SplashScreenTimer_Tick()
-      If m_WaitAfterRender > 4 Then
+      If m_WaitAfterRender > 1 Then
          ' chiudo SplashScreen
          Map.refSplashScreen.Close()
-      ElseIf m_WaitAfterRender >= 1 Then
+      ElseIf m_WaitAfterRender > 0 Then
          m_WaitAfterRender += 1
       End If
    End Sub

Icarus/ShellNumberPanel/ShellNumberPanelV.xaml

@@ -269,30 +269,18 @@
                     Style="{StaticResource ToolBar_Button}">
             <Image Source="/Resources/GridViewPanel/CplaneELEVATION.png" Stretch="Uniform"/>
          </Button>
-         <Button Grid.Column="7" 
-                    Command="{Binding CPlaneRotate_Command}" 
-                    ToolTip="{Binding CPlaneRotateToolTip}" 
+         <Button Grid.Column="7"
+                    Command="{Binding CPlaneOrigin_Command}"
+                    ToolTip="{Binding CPlaneOriginToolTip}" 
                     Style="{StaticResource ToolBar_Button}">
-            <Image Source="/Resources/GridViewPanel/CplaneROTATE.png" Stretch="Uniform"/>
+            <Image Source="/Resources/GridViewPanel/CPlaneORIGIN.png" Stretch="Uniform"/>
          </Button>
          <Button Grid.Column="8"
-                    Command="{Binding CPlane3P_Command}"
-                    ToolTip="{Binding CPlane3PToolTip}" 
-                    Style="{StaticResource ToolBar_Button}">
-            <Image Source="/Resources/GridViewPanel/CPlane3POINTS.png" Stretch="Uniform"/>
-         </Button>
-         <Button Grid.Column="9"
-                    Command="{Binding CPlanePerpObj_Command}"
-                    ToolTip="{Binding CPlanePerpObjToolTip}" 
-                    Style="{StaticResource ToolBar_Button}">
-            <Image Source="/Resources/GridViewPanel/CPlanePERPCURVE.png" Stretch="Uniform"/>
-         </Button>
-         <!--<Button Grid.Column="10"
                     Command="{Binding CPlaneObj_Command}"
                     ToolTip="{Binding CPlaneObjToolTip}" 
                     Style="{StaticResource ToolBar_Button}">
                <Image Source="/Resources/GridViewPanel/CplaneOBJECT.png" Stretch="Uniform"/>
-            </Button>-->
+            </Button>
       </Grid>
    </Border>
    <!--<Popup IsOpen="{Binding IsChecked, ElementName=GridBtn}"

Icarus/ShellNumberPanel/ShellNumberPanelVM.vb

@@ -1173,7 +1173,7 @@ Public Class ShellNumberPanelVM
       End While
       EgtDeselectAll()
       m_bCPlaneObj_IsActive = True
-      Map.refControllerInputPanelVM.PrepareInputBox("Grid from Selection", "Select the face of the object where to place the grid", "", False, False)
+    '  Map.refControllerInputPanelVM.PrepareInputBox("Grid from Selection", "Select the face of the object where to place the grid", "", False, False)
    End Sub
 
 #End Region ' CPlaneObj

Icarus/SliceManager/SliceManagerV.xaml

@@ -14,10 +14,10 @@
             <RowDefinition Height="Auto"/>
          </Grid.RowDefinitions>
          <TextBlock Text="{Binding ghTime}"
-                    Visibility="{Binding TimeMass_Visibility}"/>
+                    Visibility="{Binding Time_Visibility}"/>
          <TextBlock Grid.Row="1"
                     Text="{Binding ghMass}"
-                    Visibility="{Binding TimeMass_Visibility}"
+                    Visibility="{Binding Mass_Visibility}"
                     Margin="0,0,0,5"/>
          <TextBlock Grid.Row="2"
                     Text="{Binding sLoadingText}"

Icarus/SliceManager/SliceManagerVM.vb

@@ -126,12 +126,18 @@ Public Class SliceManagerVM
       End Get
    End Property
 
-   Public ReadOnly Property TimeMass_Visibility As Visibility
+   Public ReadOnly Property Time_Visibility As Visibility
       Get
          Return If(m_dTime > 0, Visibility.Visible, Visibility.Collapsed)
       End Get
    End Property
 
+   Public ReadOnly Property Mass_Visibility As Visibility
+      Get
+         Return If(m_dMass > 0, Visibility.Visible, Visibility.Collapsed)
+      End Get
+   End Property
+
    Private m_Buttons_IsEnabled As Boolean = True
    Public ReadOnly Property Buttons_IsEnabled As Boolean
       Get
@@ -203,11 +209,11 @@ Public Class SliceManagerVM
       End If
       NotifyPropertyChanged(NameOf(ghTime))
       NotifyPropertyChanged(NameOf(ghMass))
-      NotifyPropertyChanged(NameOf(TimeMass_Visibility))
+      NotifyPropertyChanged(NameOf(Time_Visibility))
+      NotifyPropertyChanged(NameOf(Mass_Visibility))
    End Sub
 
    Private Function ProcessEvents(ByVal nProg As Integer, ByVal nPause As Integer) As Integer
-      EgtOutLog(nProg)
       ' Se previsto, imposto progress
       If nProg >= 0 Then
          Dim dPartialProgress As Integer = 0
@@ -335,7 +341,11 @@ Public Class SliceManagerVM
          m_bGenerate = bForceGenerate OrElse (bGenerate AndAlso bToRecalcGenerate)
       End If
       If m_bSlice OrElse m_bCalcTFS Then
-         EgtSetInfo(nPartId, MAC_TORECALC_GENERATE, True)
+         nPartId = EgtGetFirstPart()
+         While nPartId <> GDB_ID.NULL
+            EgtSetInfo(nPartId, MAC_TORECALC_GENERATE, True)
+            nPartId = EgtGetNextPart(nPartId)
+         End While
       End If
       ' Aggiorno dati macchina
       If m_bCalcTFS Then Map.refTFSEditorVM.UpdateSpeedMinMax()
@@ -507,7 +517,8 @@ Public Class SliceManagerVM
       CalcSlice(False)
       Map.refTopPanelVM.SelPage = Pages.SLICE
       Map.refSliderManagerVM.SetLayerIndexToMax()
-      NotifyPropertyChanged(NameOf(TimeMass_Visibility))
+      NotifyPropertyChanged(NameOf(Time_Visibility))
+      NotifyPropertyChanged(NameOf(Mass_Visibility))
       m_bCalculating = False
    End Sub
 
@@ -535,6 +546,8 @@ Public Class SliceManagerVM
       m_bCalculating = True
       ' eseguo calcoli
       CalcSlice(False)
+      NotifyPropertyChanged(NameOf(Time_Visibility))
+      NotifyPropertyChanged(NameOf(Mass_Visibility))
       m_bCalculating = False
    End Sub
 
@@ -615,6 +628,8 @@ Public Class SliceManagerVM
             MessageBox.Show("Edit failed, missing part program file" & " (" & sIsoFilePath & ")")
          End If
       End If
+      NotifyPropertyChanged(NameOf(Time_Visibility))
+      NotifyPropertyChanged(NameOf(Mass_Visibility))
       m_bCalculating = False
    End Sub
 

Icarus/StartMachPanel/StartMachPanelV.xaml

@@ -207,6 +207,7 @@
             <ColumnDefinition Width="Auto"/>
             <ColumnDefinition Width="Auto"/>
             <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
          </Grid.ColumnDefinitions>
          <Button Command="{Binding CPlaneTop_Command}" 
                     ToolTip="{Binding CPlaneTopToolTip}"
@@ -255,6 +256,12 @@
                     Style="{StaticResource ToolBar_Button}">
             <Image Source="/Resources/GridViewPanel/CplaneORIGIN.png" Stretch="Uniform"/>
          </Button>
+         <Button Grid.Column="8"
+                    Command="{Binding CPlaneObj_Command}"
+                    ToolTip="{Binding CPlaneObjToolTip}" 
+                    Style="{StaticResource ToolBar_Button}">
+            <Image Source="/Resources/GridViewPanel/CplaneOBJECT.png" Stretch="Uniform"/>
+         </Button>
       </Grid>
    </Border>
    <!--<Popup IsOpen="{Binding IsChecked, ElementName=GridBtn}"

Icarus/StartMachPanel/StartMachPanelVM.vb

@@ -421,7 +421,18 @@ Public Class StartMachPanelVM
 
    Friend Sub OnKeyDown(Key As Forms.Keys)
       If Key = Forms.Keys.Escape Then
-
+         ' se attiva, disattivo griglia su oggetto
+         If m_bCPlaneObj_IsActive Then
+            m_bCPlaneObj_IsActive = False
+            ResetCPlaneObjIsActive()
+            ' ripristino selezioni precedenti
+            For Each Id In Map.refShellNumberPanelVM.PrevSelObjs
+               EgtSelectObj(Id)
+            Next
+            EgtDraw()
+            ' rimetto la selezione scena a null
+            Map.refSceneHostVM.MainScene.SetStatusNull()
+         End If
       End If
    End Sub
 
@@ -789,6 +800,54 @@ Public Class StartMachPanelVM
 
 #End Region ' CPlaneOrigin
 
+#Region "CPlaneObj"
+
+   Private m_bCPlaneObj_IsActive As Boolean = False
+   Friend ReadOnly Property bCPlaneObj_IsActive As Boolean
+      Get
+         Return m_bCPlaneObj_IsActive
+      End Get
+   End Property
+   Friend Sub ResetCPlaneObjIsActive()
+      m_bCPlaneObj_IsActive = False
+   End Sub
+   Private m_PrevSelObjs As New List(Of Integer)
+   Friend ReadOnly Property PrevSelObjs As List(Of Integer)
+      Get
+         Return m_PrevSelObjs
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Returns a command that do CPlanepObj.
+   ''' </summary>
+   Public ReadOnly Property CPlaneObj_Command As ICommand
+      Get
+         If m_cmdCPlaneObj Is Nothing Then
+            m_cmdCPlaneObj = New Command(AddressOf CPlaneObj)
+         End If
+         Return m_cmdCPlaneObj
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Execute the CPlaneObj.  This method is invoked by the CPlaneObjCommand.
+   ''' </summary>
+   Public Sub CPlaneObj(ByVal param As Object)
+      If Map.refSceneHostVM.MainController.GetStep <> 0 Then Return
+      ' salvo selezione precedente e deseleziono altri oggetti
+      Dim nSelObjId As Integer = EgtGetFirstSelectedObj()
+      While nSelObjId <> GDB_ID.NULL
+         m_PrevSelObjs.Add(nSelObjId)
+         nSelObjId = EgtGetNextSelectedObj()
+      End While
+      EgtDeselectAll()
+      m_bCPlaneObj_IsActive = True
+    '  Map.refControllerInputPanelVM.PrepareInputBox("Grid from Selection", "Select the face of the object where to place the grid", "", False, False)
+   End Sub
+
+#End Region ' CPlaneObj
+
 #Region "DragMove"
 
    Public ReadOnly Property DragMove_Command As ICommand

Icarus/StatusBar/MyStatusBarVM.vb

@@ -17,15 +17,27 @@ Public Class MyStatusBarVM
       End Get
    End Property
 
-   'Public ReadOnly Property CurrMachine As String
-   '   Get
-   '      Return If(Not IsNothing(Map.refMachinePanelVM.SelectedMachine), Map.refMachinePanelVM.SelectedMachine.Name, "")
-   '   End Get
-   'End Property
+   Private m_bGridVisibility As Boolean
+   Public Property bGridVisibility As Boolean
+      Get
+         Return m_bGridVisibility
+      End Get
+      Set(value As Boolean)
+         m_bGridVisibility = value
+         EgtSetGridShow(value, value)
+         EgtDraw()
+      End Set
+   End Property
 
    ' Definizione comandi
    Private m_cmdStopProgress As ICommand
 
+   Public ReadOnly Property GridVisibilityMsg As String
+      Get
+         Return "GRID"
+      End Get
+   End Property
+
    Sub New()
       ' Creo riferimento a questa classe in Map
       Map.SetRefMyStatusBarVM(Me)
@@ -33,6 +45,14 @@ Public Class MyStatusBarVM
       EgtSetProcessEvents(m_ProcEventsCallback)
       ' Installo funzione output testo su status per lua
       EgtSetOutText(m_OutTextCallback)
+      ' imposto stato di visualizzazione della griglia
+      m_bGridVisibility = GetMainPrivateProfileInt(S_GRID, K_SHOWGRID, 1) <> 0
+      NotifyPropertyChanged(NameOf(bGridVisibility))
+      ' modo di visualizzazione
+      Dim nShowMode As Integer = GetMainPrivateProfileInt(S_SCENE, K_SHOWMODE, SM.SHADING)
+      Map.refShowPanelVM.SetShowMode(DirectCast(nShowMode, SM))
+      ' visualizzazione freccia direzione su curve
+      Map.refShowPanelVM.CurveDirIsChecked = EgtGetShowCurveDirection()
    End Sub
 
    Friend Overloads Sub SetSnapPointType(sSnapPntType As SP)

Icarus/StatusBar/StatusBarV.xaml

@@ -16,6 +16,7 @@
                <ColumnDefinition Width="Auto"/>
                <ColumnDefinition Width="Auto"/>
                <ColumnDefinition Width="Auto"/>
+               <ColumnDefinition Width="Auto"/>
             </Grid.ColumnDefinitions>
          </Grid>
       </ItemsPanelTemplate>
@@ -121,16 +122,24 @@
       <TextBlock Text="{Binding OutputMessage}"
                  Foreground="{Binding OutputMessage_Foreground}"/>
    </StatusBarItem>
-   
-   <!--Indica il tipo di punto notevole selezionato-->
+
+   <!--Indica se la griglia è attiva o disattiva-->
    <StatusBarItem Grid.Column="4">
+      <ToggleButton Content="{Binding GridVisibilityMsg}"
+                    IsChecked="{Binding bGridVisibility}" 
+                    Width="80"/>
+   </StatusBarItem>
+
+   <!--Indica il tipo di punto notevole selezionato-->
+   <StatusBarItem Grid.Column="5">
       <Button Content="{Binding SnapPointType}"
               Background="{Binding SnapPointType_Background}"
+              IsHitTestVisible="False"
               Width="80"/>
    </StatusBarItem>
    
    <!--Indica la posizione del mouse quando è sulla scena-->
-   <StatusBarItem Grid.Column="5">
+   <StatusBarItem Grid.Column="6">
       <TextBlock Text="{Binding CurrPos}"
                  TextAlignment="Center"
                  Foreground="Black"
@@ -138,17 +147,10 @@
    </StatusBarItem>
    
    <!--Indica l'unità di misura-->
-   <StatusBarItem Grid.Column="6">
+   <StatusBarItem Grid.Column="7">
       <TextBlock Text="{Binding MeasureUnit}"
                  Foreground="Black"
                  Width="35"/>
    </StatusBarItem>
 
-   <!--Indica la macchina corrente--><!--
-   <StatusBarItem Grid.Column="7">
-      <TextBlock Text="{Binding CurrMachine}"
-                 Foreground="Black"
-                 Margin="0,0,5,0"/>
-   </StatusBarItem>-->
-
 </StatusBar>

Icarus/TSFEditor/TFSEditorV.xaml

@@ -17,7 +17,7 @@
          <WrapPanel Orientation="Horizontal" x:Name="TFSEditorStackPanel">
             <ComboBox ItemsSource="{Binding MediaTypeList}"
                       SelectedIndex="{Binding ghSelMediaType}"
-                      Margin="0,0,10,0"
+                      Margin="0,5,10,5"
                       Style="{StaticResource PartParam_ComboBox}"/>
             <Grid>
                <Grid.ColumnDefinitions>
@@ -31,11 +31,13 @@
                   </Grid.ColumnDefinitions>
                   <TextBlock Text="Slice Number:"
                              Visibility="{Binding MediaHeight_Visibility}"
+                             Margin="2.5,0,2.5,0"
                              Style="{StaticResource TSFEditor_TextBlock}"/>
                   <TextBox Grid.Column="1"
                            Text="{Binding sMediaHeight}"
                            Width="50"
                            Visibility="{Binding MediaHeight_Visibility}"
+                           Margin="2.5,0,2.5,0"
                            Style="{StaticResource ControllerInputPanel_TextBox}"/>
                </Grid>
                <Grid>
@@ -45,11 +47,13 @@
                   </Grid.ColumnDefinitions>
                   <TextBlock Text="Difference:"
                              Visibility="{Binding Difference_Visibility}"
+                             Margin="2.5,0,2.5,0"
                              Style="{StaticResource TSFEditor_TextBlock}"/>
                   <TextBox Grid.Column="1"
                            Text="{Binding sDifference}"
                            Width="50"
                            Visibility="{Binding Difference_Visibility}"
+                           Margin="2.5,0,2.5,0"
                            Style="{StaticResource ControllerInputPanel_TextBox}"/>
                </Grid>
                <Grid>
@@ -59,11 +63,13 @@
                   </Grid.ColumnDefinitions>
                   <TextBlock Text="F:"
                              Visibility="{Binding FCurr_Visibility}"
+                             Margin="2.5,0,2.5,0"
                              Style="{StaticResource TSFEditor_TextBlock}"/>
                   <TextBox Grid.Column="1"
                            Text="{Binding sFCurr}"
                            Width="50"
                            Visibility="{Binding FCurr_Visibility}"
+                           Margin="2.5,0,2.5,0"
                            Style="{StaticResource ControllerInputPanel_TextBox}"/>
                </Grid>
                <StackPanel Grid.Column="1"
@@ -71,12 +77,15 @@
                   <Button Content="Set"
                           Command="{Binding Set_Command}"
                           Visibility="{Binding FCurr_Visibility}"
+                          Margin="2.5,0,2.5,0"
                           Style="{StaticResource ToolBar_TextButton}"/>
                   <Button Content="Media"
                           Command="{Binding Media_Command}"
+                          Margin="2.5,0,2.5,0"
                           Style="{StaticResource ToolBar_TextButton}"/>
                   <Button Content="Reset"
                           Command="{Binding Reset_Command}"
+                          Margin="2.5,0,2.5,0"
                           Style="{StaticResource ToolBar_TextButton}"/>
                </StackPanel>
             </Grid>
@@ -92,7 +101,7 @@
                    ScrollViewer.CanContentScroll="True" 
                    ScrollViewer.VerticalScrollBarVisibility="Auto"
                    ScrollViewer.HorizontalScrollBarVisibility="Auto"
-                   Margin="0,0,0,5">
+                   Margin="0,5,0,5">
             <DataGrid.Columns>
                <DataGridTextColumn Header="Index" 
                                    Binding="{Binding nIndex}"
@@ -166,9 +175,11 @@
          <StackPanel Grid.Row="2" Orientation="Horizontal">
             <ComboBox ItemsSource="{Binding FilterList}"
                       SelectedIndex="{Binding nSelFilter}"
+                      Margin="0,0,2.5,0"
                       Style="{StaticResource PartParam_ComboBox}"/>
             <Button Content="Extend"
                     Command="{Binding Extend_Command}"
+                    Margin="2.5,0,2.5,0"
                     Style="{StaticResource ToolBar_TextButton}"/>
          </StackPanel>
       </Grid>

Icarus/TopPanel/TopPanelV.xaml

@@ -36,7 +36,7 @@
                 Grid.Row="1"
                 ItemsSource="{Binding PartList}"
                 SelectedItem="{Binding SelPart}"
-                DisplayMemberPath="sImportedFileName"
+                DisplayMemberPath="sName"
                 FontSize="14"
                 FontFamily="/Resources/Fonts/#Roboto"
                 FontWeight="Light"
@@ -148,8 +148,8 @@
                        Style="{StaticResource PrintParam_ToggleButton}">
             <Grid HorizontalAlignment="Stretch">
                <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="2*"/>
-                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="3*"/>
+                  <ColumnDefinition Width="1.5*"/>
                   <ColumnDefinition Width="2*"/>
                   <ColumnDefinition Width="1*"/>
                   <ColumnDefinition Width="2*"/>

Icarus/TopPanel/TopPanelVM.vb

@@ -205,8 +205,9 @@ Public Class TopPanelVM
       Set(value As MaterialIndex)
          ' salvo materiale selezionato come ultimo utilizzato
          If Not IsNothing(value) Then WriteMainPrivateProfileString(S_PRINTING3D, K_CURRMATERIAL, value.sGUID)
-         ' salvo lavorazione selezionata per riselezionarlo
-         Dim PrevMachiningGuid As Guid = m_SelMachining.sGUID
+         ' salvo lavorazione selezionata per riselezionarla
+         Dim PrevMachiningGuid As Guid = Guid.Empty
+         If Not IsNothing(m_SelMachining) Then PrevMachiningGuid = m_SelMachining.sGUID
          ' seleziono materiale
          m_SelMaterial = value
          ' scrivo materiale sulla tavola
@@ -223,9 +224,18 @@ Public Class TopPanelVM
          SetSelMachining(If(Not IsNothing(PrevMachining), PrevMachining, MachiningIndex.Empty()))
       End Set
    End Property
-   Friend Sub SetSelMaterial(value As MaterialIndex)
+   Friend Sub SetSelMaterial(value As MaterialIndex, Optional bUpdateMaterialList As Boolean = False)
       m_SelMaterial = value
       NotifyPropertyChanged(NameOf(SelMaterial))
+      If bUpdateMaterialList Then
+         ' salvo lavorazione selezionata per riselezionarla
+         Dim PrevMachiningGuid As Guid = Guid.Empty
+         If Not IsNothing(m_SelMachining) Then PrevMachiningGuid = m_SelMachining.sGUID
+         ' ricarico lista lavorazioni valide per il materiale selezionato
+         InitMachiningsList()
+         Dim PrevMachining As MachiningIndex = m_MachiningList.FirstOrDefault(Function(x) x.sGUID = PrevMachiningGuid)
+         SetSelMachining(If(Not IsNothing(PrevMachining), PrevMachining, MachiningIndex.Empty()))
+      End If
    End Sub
 
 #End Region    ' Material
@@ -393,11 +403,25 @@ Public Class TopPanelVM
 #Region "Pages"
 
    Private Sub InitIMPORT()
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(False)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(False)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(False)
+      ' imposto pagina
       Map.refLeftPanelVM.SetSelPanel(LeftPanelVM.Panels.IMPORT)
-      Map.refImportPanelVM.Init()
+      ''Map.refImportPanelVM.Init()
+      Map.refManagePartPanelVM.Init(ManagePartPanelVM.ManagePartType.IMPORT)
    End Sub
 
    Private Function ExitIMPORT()
+      ' riabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(True)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(True)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(True)
       Return True
    End Function
 
@@ -509,11 +533,31 @@ Public Class TopPanelVM
    End Function
 
    Private Sub InitMODIFYPART()
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(False)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(False)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(False)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(False)
+      ' tolgo mark da pezzo selezionato
+      If Not IsNothing(SelPart) Then
+         EgtResetMark(SelPart.nPrintSolidId)
+      End If
+      ' imposto pagina
       Map.refLeftPanelVM.SetSelPanel(LeftPanelVM.Panels.MODIFYPART)
    End Sub
 
    Private Function ExitMODIFYPART()
-
+      ' riabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(True)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(True)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(True)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(True)
+      ' ripristino mark su pezzo selezionato
+      If Not IsNothing(SelPart) Then
+         EgtSetMark(SelPart.nPrintSolidId)
+      End If
       Return True
    End Function
 
@@ -529,8 +573,8 @@ Public Class TopPanelVM
       ' rinomino pezzo e layer
       Dim nPartId As Integer = EgtGetLastPart()
       EgtSetName(nPartId, PART)
-      Dim nLayerId As Integer = EgtGetFirstInGroup(nPartId)
-      EgtSetName(nLayerId, ORIGINAL_SOLID)
+      'Dim nLayerId As Integer = EgtGetFirstInGroup(nPartId)
+      'EgtSetName(nLayerId, ORIGINAL_SOLID)
 
       '' Recupero o creo layer ausiliario
       'Dim nAuxId As Integer = EgtGetFirstNameInGroup(nPartId, LAY_AUX)

Icarus/Utility/CurrentMachine.vb

@@ -79,7 +79,8 @@ Public Module CurrentMachine
       Dim nQqqId = EgtAddMachGroup("qqq")
       EgtSetTable("Tab")
       EgtGetTableArea(1, m_b3Tab)
-      EgtRemoveMachGroup(nQqqId Or GDB_ID.NULL)
+      EgtResetCurrMachGroup()
+      EgtRemoveMachGroup(nQqqId)
       ' carico materiali e lavorazioni
       Map.refTopPanelVM.InitMaterialList()
       Map.refMaterialDbVM.Init()

Icarus/Utility/Dictionary.xaml

@@ -29,7 +29,7 @@
    <PrintApp:DispositionPanelVM x:Key="DispositionPanelVM"/>
    <PrintApp:StartMachPanelVM x:Key="StartMachPanelVM"/>
    <PrintApp:RibPanelVM x:Key="RibPanelVM"/>
-   <PrintApp:ImportPanelVM x:Key="ImportPanelVM"/>
+   <!--<PrintApp:ImportPanelVM x:Key="ImportPanelVM"/>-->
    <PrintApp:TopPanelVM x:Key="TopPanelVM"/>
    <PrintApp:ControllerInputPanelVM x:Key="ControllerInputPanelVM"/>
    <PrintApp:SliceManagerVM x:Key="SliceManagerVM"/>
@@ -44,7 +44,8 @@
    <PrintApp:SimulationPanelVM x:Key="SimulationPanelVM"/>
    <PrintApp:ReferencePanelVM x:Key="ReferencePanelVM"/>
    <PrintApp:ViewLayerManagerVM x:Key="ViewLayerManagerVM"/>
-   <PrintApp:ModifyPartPanelVM x:Key="ModifyPartPanelVM"/>
+   <!--<PrintApp:ModifyPartPanelVM x:Key="ModifyPartPanelVM"/>-->
+   <PrintApp:ManagePartPanelVM x:Key="ManagePartPanelVM"/>
    <!--<EgtBEAMWALL:CALCPanelVM x:Key="CALCPanelVM"/>
    <EgtBEAMWALL:PartParametersVM x:Key="PartParametersVM"/>
    <EgtBEAMWALL:LeftPanelVM x:Key="LeftPanelVM"/>

Icarus/Utility/GeomEntityColors.vb

@@ -46,7 +46,7 @@ Module GeomEntityColors
 
    Sub New()
       ' imposto colori superfici
-      m_c3Print.FromColor(System.Drawing.Color.Yellow)
+      m_c3Print.FromColor(System.Drawing.Color.Aqua)
       m_c3MachStart.FromColor(System.Drawing.Color.Red)
       m_c3Rib.FromColor(System.Drawing.Color.MediumOrchid)
       m_c3ShellNumber.FromColor(System.Drawing.Color.Lime)

Icarus/Utility/LuaExec.vb

@@ -25,7 +25,7 @@ Module LuaExec
       Dim SelMaterialParam As Material = Map.refTopPanelVM.GetSelMaterialData()
       Dim dMachiningConstant As Double = 100
       If Not IsNothing(Map.refTopPanelVM.CurrMachining) Then
-         Dim MachiningConstant As CurrNumericMachiningParam = Map.refTopPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(y) y.Type = MachiningParam.Params.CONSTANT)
+         Dim MachiningConstant As CurrNumericMachiningParam = Map.refTopPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(y) y.Type = MachiningParam.Params.FLOWRATE_PC)
          If Not IsNothing(MachiningConstant) Then
             dMachiningConstant = MachiningConstant.dValue
          End If

Icarus/Utility/Map.vb

@@ -47,7 +47,7 @@ Module Map
    'Private m_refSplitModeVM As SplitModeVM
    'Private m_refMoveRawModeVM As MoveRawModeVM
    'Private m_refSimulTabVM As SimulTabVM
-   Private m_refImportPanelVM As ImportPanelVM
+   ''Private m_refImportPanelVM As ImportPanelVM
    Private m_refSliceManagerVM As SliceManagerVM
    Private m_refTFSEditorVM As TFSEditorVM
    Private m_refCurrMachiningPanelVM As CurrMachiningPanelVM
@@ -61,7 +61,8 @@ Module Map
    Private m_refShellNumberPanelVM As ShellNumberPanelVM
    Private m_refShellNumberParamPanelVM As ShellNumberParamPanelVM
    Private m_refSplashScreen As SplashScreen
-   Private m_refModifyPartPanelVM As ModifyPartPanelVM
+   ''Private m_refModifyPartPanelVM As ModifyPartPanelVM
+   Private m_refManagePartPanelVM As ManagePartPanelVM
 
 #Region "Get"
 
@@ -106,11 +107,11 @@ Module Map
       End Get
    End Property
 
-   'Public ReadOnly Property refShowPanelVM As ShowPanelVM
-   '   Get
-   '      Return LibMap.refShowPanelVM
-   '   End Get
-   'End Property
+   Public ReadOnly Property refShowPanelVM As ShowPanelVM
+      Get
+         Return LibMap.refShowPanelVM
+      End Get
+   End Property
 
    'Public ReadOnly Property refMainMenuVM As MainMenuVM
    '   Get
@@ -346,11 +347,11 @@ Module Map
    '   End Get
    'End Property
 
-   Public ReadOnly Property refImportPanelVM As ImportPanelVM
-      Get
-         Return m_refImportPanelVM
-      End Get
-   End Property
+   'Public ReadOnly Property refImportPanelVM As ImportPanelVM
+   '   Get
+   '      Return m_refImportPanelVM
+   '   End Get
+   'End Property
 
    Public ReadOnly Property refSliceManagerVM As SliceManagerVM
       Get
@@ -429,10 +430,16 @@ Module Map
          Return m_refSplashScreen
       End Get
    End Property
-   
-   Public ReadOnly Property refModifyPartPanelVM As ModifyPartPanelVM
+
+   ''Public ReadOnly Property refModifyPartPanelVM As ModifyPartPanelVM
+   ''   Get
+   ''      Return m_refModifyPartPanelVM
+   ''   End Get
+   ''End Property
+
+   Public ReadOnly Property refManagePartPanelVM As ManagePartPanelVM
       Get
-         Return m_refModifyPartPanelVM
+         Return m_refManagePartPanelVM
       End Get
    End Property
 
@@ -674,10 +681,10 @@ Module Map
    '   Return Not IsNothing(m_refSimulTabVM)
    'End Function
 
-   Friend Function SetRefImportPanelVM(ImportPanelVM As ImportPanelVM) As Boolean
-      m_refImportPanelVM = ImportPanelVM
-      Return Not IsNothing(m_refImportPanelVM)
-   End Function
+   ''Friend Function SetRefImportPanelVM(ImportPanelVM As ImportPanelVM) As Boolean
+   ''   m_refImportPanelVM = ImportPanelVM
+   ''   Return Not IsNothing(m_refImportPanelVM)
+   ''End Function
 
    Friend Function SetRefSliceManagerVM(SliceManagerVM As SliceManagerVM) As Boolean
       m_refSliceManagerVM = SliceManagerVM
@@ -743,10 +750,15 @@ Module Map
       m_refSplashScreen = SplashScreen
       Return Not IsNothing(m_refSplashScreen)
    End Function
-   
-   Friend Function SetRefModifyPartPanelVM(ModifyPartPanelVM As ModifyPartPanelVM) As Boolean
-      m_refModifyPartPanelVM = ModifyPartPanelVM
-      Return Not IsNothing(m_refModifyPartPanelVM)
+
+   ''Friend Function SetRefModifyPartPanelVM(ModifyPartPanelVM As ModifyPartPanelVM) As Boolean
+   ''   m_refModifyPartPanelVM = ModifyPartPanelVM
+   ''   Return Not IsNothing(m_refModifyPartPanelVM)
+   ''End Function
+
+   Friend Function SetRefManagePartPanelVM(ManagePartPanelVM As ManagePartPanelVM) As Boolean
+      m_refManagePartPanelVM = ManagePartPanelVM
+      Return Not IsNothing(m_refManagePartPanelVM)
    End Function
 
 #End Region    ' Set

Icarus/ViewLayerManager/ViewLayerManagerVM.vb

@@ -44,7 +44,23 @@ Public Class ViewLayerManagerVM
                                                             New ViewLayer(ViewLayer.ViewLayerType.SHELL_NUMBER, "Reduce Shell Number", True),
                                                             New ViewLayer(ViewLayer.ViewLayerType.AUX_SOLIDS, "Filled Solids", True),
                                                             New ViewLayer(ViewLayer.ViewLayerType.SOLID_SLICE, "Solid Slice", True),
-                                                            New ViewLayer(ViewLayer.ViewLayerType.SLICE_TOOLPATH, "Slice Toolpath", True)})
+                                                            New ViewLayer(ViewLayer.ViewLayerType.SLICE_TOOLPATH, "Slice Toolpath", True),
+                                                            New ViewLayer(ViewLayer.ViewLayerType.OTHERS, "Others", True)})
+   End Sub
+
+   Friend Sub ResetSolid()
+      Dim ViewLayerSolid As ViewLayer = m_LayerList.FirstOrDefault(Function(x) x.Type = ViewLayer.ViewLayerType.SOLID_SLICE)
+      If Not IsNothing(ViewLayerSolid) Then
+         ViewLayerSolid.bIsVisible = False
+         If Map.refTopPanelVM.SelPage = Pages.MODIFY Then
+            WriteMainPrivateProfileString(S_VIEWLAYER, K_SLC_SOLIDSLICE, "0")
+         ElseIf Map.refTopPanelVM.SelPage = Pages.SLICE Then
+            WriteMainPrivateProfileString(S_VIEWLAYER, K_MOD_SOLIDSLICE, "0")
+         ElseIf Map.refTopPanelVM.SelPage = Pages.NULL then
+            WriteMainPrivateProfileString(S_VIEWLAYER, K_MOD_SOLIDSLICE, "0")
+            WriteMainPrivateProfileString(S_VIEWLAYER, K_SLC_SOLIDSLICE, "0")
+         End If
+      End If
    End Sub
 
    Friend Sub UpdateIsVisibleFromIni()
@@ -81,6 +97,7 @@ Public Class ViewLayer
       AUX_SOLIDS = 6
       SOLID_SLICE = 7
       SLICE_TOOLPATH = 8
+      OTHERS = 9
    End Enum
 
    Private m_Type As ViewLayerType
@@ -208,6 +225,8 @@ Public Class ViewLayer
                      EgtSetStatus(Entity, Status)
                   Next
                Next
+            Case ViewLayerType.OTHERS
+               EgtSetStatus(CurrPart.nOthersLayerId, Status)
          End Select
       Next
       ' Ripristino stato segnalazione modifica
@@ -258,6 +277,8 @@ Public Class ViewLayer
                   nStatus = If(bSolid, GetMainPrivateProfileInt(S_VIEWLAYER, K_MOD_SOLIDSLICE, 1), 0)
                Case ViewLayerType.SLICE_TOOLPATH
                   nStatus = GetMainPrivateProfileInt(S_VIEWLAYER, K_MOD_SLICETOOLPATH, 1)
+               Case ViewLayerType.OTHERS
+                  nStatus = GetMainPrivateProfileInt(S_VIEWLAYER, K_MOD_OTHERS, 1)
             End Select
          Case Pages.SLICE
             Select Case m_Type
@@ -277,6 +298,8 @@ Public Class ViewLayer
                   nStatus = GetMainPrivateProfileInt(S_VIEWLAYER, K_SLC_SOLIDSLICE, 1)
                Case ViewLayerType.SLICE_TOOLPATH
                   nStatus = GetMainPrivateProfileInt(S_VIEWLAYER, K_SLC_SLICETOOLPATH, 1)
+               Case ViewLayerType.OTHERS
+                  nStatus = GetMainPrivateProfileInt(S_VIEWLAYER, K_SLC_OTHERS, 1)
             End Select
       End Select
       m_IsVisible = nStatus
@@ -305,6 +328,8 @@ Public Class ViewLayer
                   WriteMainPrivateProfileString(S_VIEWLAYER, K_MOD_SOLIDSLICE, nStatus)
                Case ViewLayerType.SLICE_TOOLPATH
                   WriteMainPrivateProfileString(S_VIEWLAYER, K_MOD_SLICETOOLPATH, nStatus)
+               Case ViewLayerType.OTHERS
+                  WriteMainPrivateProfileString(S_VIEWLAYER, K_MOD_OTHERS, nStatus)
             End Select
          Case Pages.SLICE
             Select Case m_Type
@@ -324,6 +349,8 @@ Public Class ViewLayer
                   WriteMainPrivateProfileString(S_VIEWLAYER, K_SLC_SOLIDSLICE, nStatus)
                Case ViewLayerType.SLICE_TOOLPATH
                   WriteMainPrivateProfileString(S_VIEWLAYER, K_SLC_SLICETOOLPATH, nStatus)
+               Case ViewLayerType.OTHERS
+                  WriteMainPrivateProfileString(S_VIEWLAYER, K_SLC_OTHERS, nStatus)
             End Select
       End Select
    End Sub

Icarus/ViewModel/Print3dPartVM.vb

@@ -1,7 +1,9 @@
 Imports System.Collections.ObjectModel
 Imports EgtUILib
+Imports EgtWPFLib5
 
 Public Class Print3dPartVM
+   Inherits VMBase
 
    Private m_nPartId As Integer
    Public ReadOnly Property nPartId As Integer
@@ -17,18 +19,9 @@ Public Class Print3dPartVM
          Return m_nPrintSolidLayerId
       End Get
    End Property
-   Private m_nPrintSolidId As Integer = GDB_ID.NULL
    Public ReadOnly Property nPrintSolidId As Integer
       Get
-         Return m_nPrintSolidId
-      End Get
-   End Property
-
-   ' solido/superficie originale
-   Private m_nOriginalPartLayerId As Integer = GDB_ID.NULL
-   Public ReadOnly Property nOriginalPartLayerId As Integer
-      Get
-         Return m_nOriginalPartLayerId
+         Return EgtGetFirstInGroup(m_nPrintSolidLayerId)
       End Get
    End Property
 
@@ -87,6 +80,13 @@ Public Class Print3dPartVM
       End Get
    End Property
 
+   Private m_sName As String
+   Public ReadOnly Property sName As String
+      Get
+         Return m_sName
+      End Get
+   End Property
+
    Public ReadOnly Property sImportedFileName As String
       Get
          Return If(Not String.IsNullOrWhiteSpace(m_sImportedFilePath), IO.Path.GetFileName(m_sImportedFilePath), "")
@@ -118,15 +118,14 @@ Public Class Print3dPartVM
 
    Sub New(nPartId As Integer, sImportedFilePath As String)
       m_nPartId = nPartId
+      m_sName = IO.Path.GetFileName(sImportedFilePath)
       m_sImportedFilePath = sImportedFilePath
    End Sub
 
-   Sub New(nPartId As Integer, nPrintSolidLayerId As Integer, nPrintSolidId As Integer, nOriginalPartLayerId As Integer, nReferenceLayerId As Integer, nReferenceId As Integer, nMachStartLayerId As Integer,
+   Sub New(nPartId As Integer, nPrintSolidLayerId As Integer, nReferenceLayerId As Integer, nReferenceId As Integer, nMachStartLayerId As Integer,
            nRibsLayerId As Integer, nShellNumberLayerId As Integer, nAuxSolidsLayerId As Integer, nOthersLayerId As Integer, sImportedFilePath As String)
       m_nPartId = nPartId
       m_nPrintSolidLayerId = nPrintSolidLayerId
-      m_nPrintSolidId = nPrintSolidId
-      m_nOriginalPartLayerId = nOriginalPartLayerId
       m_nReferenceLayerId = nReferenceLayerId
       m_nReferenceId = nReferenceId
       m_nMachStartLayerId = nMachStartLayerId
@@ -134,6 +133,9 @@ Public Class Print3dPartVM
       m_nRibsLayerId = nRibsLayerId
       m_nShellNumberLayerId = nShellNumberLayerId
       m_nOthersLayerId = nOthersLayerId
+      If Not EgtGetInfo(nPartId, PART_NAME, m_sName) Then
+         m_sName = IO.Path.GetFileName(sImportedFilePath)
+      End If
       m_sImportedFilePath = sImportedFilePath
       RefreshPrintLayers()
    End Sub
@@ -159,6 +161,11 @@ Public Class Print3dPartVM
       m_nReferenceId = nNewReferenceId
    End Sub
 
+   Friend Sub UpdateName(Name As String)
+      m_sName = Name
+      NotifyPropertyChanged(NameOf(sName))
+   End Sub
+
 #End Region    ' METHODS
 
 End Class