- Gestito progetto modificato all'interno del programma

- ricompilazione con cambio versione.

Icarus/AttachedProperties/TreeViewItemHelper.vb

@@ -72,13 +72,15 @@ Public Module TreeViewItemHelper
       Dim treeViewItem As TreeViewItem = VisualUpwardSearch(Of TreeViewItem)(TryCast(e.OriginalSource, DependencyObject))
       If treeViewItem IsNot Nothing Then
          treeViewItem.IsSelected = True
-         Dim Tree As TreeView = VisualUpwardSearch(Of TreeView)(TryCast(treeViewItem, DependencyObject))
-         If Not IsNothing(Tree) Then
-            Dim myTransform As GeneralTransform = treeViewItem.TransformToAncestor(Tree)
+         If Not IsNothing(treeViewItem.ContextMenu) Then
+            Dim Tree As TreeView = VisualUpwardSearch(Of TreeView)(TryCast(treeViewItem, DependencyObject))
+            If Not IsNothing(Tree) Then
+               Dim myTransform As GeneralTransform = treeViewItem.TransformToAncestor(Tree)
 
-            Dim myOffset As Point = myTransform.Transform(New Point(0, 0))
-            treeViewItem.ContextMenu.HorizontalOffset = -treeViewItem.ActualWidth + (-myOffset.X) + Tree.ActualWidth - 3
-            treeViewItem.ContextMenu.VerticalOffset = -3
+               Dim myOffset As Point = myTransform.Transform(New Point(0, 0))
+               treeViewItem.ContextMenu.HorizontalOffset = -treeViewItem.ActualWidth + (-myOffset.X) + Tree.ActualWidth - 3
+               treeViewItem.ContextMenu.VerticalOffset = -3
+            End If
          End If
          e.Handled = True
       End If

Icarus/ChooseMachineWnd/ChooseMachineWndVM.vb

@@ -66,7 +66,8 @@ Public Class ChooseMachineWndVM
          RaiseEvent m_CloseWindow(True)
       Else
          ' se non seleziono nessuna macchina lo segnalo con un MessageBox
-         MessageBox.Show("No machine selected", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         ' MessageBox.Show("No machine selected", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, "No machine selected", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
       End If
    End Sub
 

Icarus/Constants/Const3dPrint.vb

@@ -3,6 +3,7 @@
    Public Const TABLE = "Table"
    Public Const TABLE_OUTLINE = "TableOutline"
    Public Const EXTRUSION_AREA = "ExtrusionArea"
+   Public Const EXTRUSION_RECT = "ExtrusionRect"
    Public Const PART = "Part"
    Public Const PRINT_SOLID = "PrintSolid"
    Public Const LAY_MACH_START = "MachStart"
@@ -89,6 +90,7 @@
    Public Const MAC_LINKTYPE = "LinkType"
    Public Const MAC_LINKPARAM = "LinkParam"
    Public Const MAC_LINKZUP = "LinkZup"
+   Public Const MAC_INNERSHELLWIDTH = "InnerStrandW"
    Public Const MAC_OFFSETLEADPOINT = "OffsetLeadPoint"
    Public Const MAC_LEADIN = "LeadIn"
    Public Const MAC_LEADINTANGDIST = "LeadInTangDist"
@@ -108,6 +110,8 @@
    Public Const MAC_PREFLOWDELAY = "PreFlowDelay"
    Public Const MAC_POSTFLOWDELAY = "PostFlowDelay"
    Public Const MAC_SCREWBACK = "ScrewBack"
+   Public Const MAC_SLICINGHEIGHT = "SlicingHeight"
+   Public Const MAC_RIBSSTRANDWIDTH = "RibsStrandW"
    Public Const MAC_RIBSTYPE = "RibsType"
    Public Const MAC_RIBSOVERLAP = "RibsOverlap"
    Public Const MAC_RIBSSTRANDCOUNT = "RibsStrandCount"
@@ -127,15 +131,39 @@
    Public Const MAC_SHELLNBRCOASTING = "ShellNbrCoasting"
    Public Const MAC_SHELLNBRWIPE = "ShellNbrWipe"
    Public Const MAC_SHELLNBRWIPEDIR = "ShellNbrWipeDir"
+   Public Const MAC_AUXSOLIDSSTRANDWIDTH = "AuxSolidsStrandW"
    Public Const MAC_AUXSOLIDSOVERLAP = "AuxSolidsOverlap"
    Public Const MAC_AUXSOLIDSINFILL = "AuxSolidsInfill"
+   Public Const MAC_AUXSOLIDSINFILLLINK = "AuxSolidsInfillLink"
+   Public Const MAC_AUXSOLIDSSTRANDCOUNT = "AuxSolidsStrandCount"
    Public Const MAC_AUXSOLIDSSTRANDORDER = "AuxSolidsStrandOrder"
    Public Const MAC_AUXSOLIDSLINKTYPE = "AuxSolidsLinkType"
    Public Const MAC_AUXSOLIDSLINKPARAM = "AuxSolidsLinkParam"
    Public Const MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE = "AuxSolidsStartPointOffsetOnSlice"
+   Public Const MAC_AUXSOLIDSOFFSETLEADPOINT = "AuxSolidsOffsetLeadPoint"
+   Public Const MAC_AUXSOLIDSDENSITY = "AuxSolidsDensity"
+   Public Const MAC_AUXSOLIDSGRIDOVERLAP = "AuxSolidsGridOverlap"
+   Public Const MAC_AUXSOLIDSDIRECTION = "AuxSolidsDirection"
+   Public Const MAC_AUXSOLIDSOFFSETX = "AuxSolidsOffsetX"
+   Public Const MAC_AUXSOLIDSOFFSETY = "AuxSolidsOffsetY"
    Public Const MAC_AUXSOLIDSCOASTINGLEN = "AuxSolidsCoastingLen"
    Public Const MAC_AUXSOLIDSWIPELEN = "AuxSolidsWipeLen"
    Public Const MAC_AUXSOLIDSWIPEDIR = "AuxSolidsWipeDir"
+   Public Const MAC_INFILLSTRANDWIDTH = "InfillStrandW"
+   Public Const MAC_FLOORTYPE = "FloorType"
+   Public Const MAC_CEILCOUNT = "CeilCount"
+   Public Const MAC_CEILTYPE = "CeilType"
+   Public Const MAC_INFILLTYPE = "InfillType"
+   Public Const MAC_INFILLLINK = "InfillLink"
+   Public Const MAC_INFILLDENSITY = "InfillDensity"
+   Public Const MAC_INFILLOVERLAP = "InfillOverlap"
+   Public Const MAC_INFILLGRIDOVERLAP = "InfillGridOverlap"
+   Public Const MAC_INFILLDIRECTION = "InfillDirection"
+   Public Const MAC_INFILLOFFSETX = "InfillOffsetX"
+   Public Const MAC_INFILLOFFSETY = "InfillOffsetY"
+   Public Const MAC_INFILLCOASTING = "InfillCoasting"
+   Public Const MAC_INFILLWIPE = "InfillWipe"
+   Public Const MAC_INFILLWIPEDIR = "InfillWipeDir"
    Public Const MAC_DYNAMICMODE = "DynamicMode"
    Public Const MAC_PRINTORDER = "PrintOrder"
    Public Const MAC_CONSTANT = "Constant"

Icarus/Constants/ConstGen.vb

@@ -21,6 +21,7 @@ Public Module ConstGen
    ' File con dati di licenza
    Public Const LIC_FILE_NAME As String = "Icarus.lic"
    Public Const S_LICENCE As String = "Licence"
+   Public Const K_LOCKID As String = "LockId"
    Public Const K_KEY As String = "Key"
    Public Const K_NESTKEY As String = "NestKey"
 

Icarus/Constants/ConstIni.vb

@@ -26,6 +26,7 @@ Public Module ConstIni
    'Public Const K_MESSAGES As String = "Messages"
    'Public Const K_WINPLACE As String = "WinPlace"
    'Public Const K_LASTPROJ As String = "LastProj"
+   Public Const K_NETKEY As String = "NetKey"
    Public Const K_LASTNGEDIR As String = "LastNgeDir"
    Public Const K_LASTIMPDIR As String = "LastImpDir"
    'Public Const K_SUPPORT As String = "Support"
@@ -125,4 +126,7 @@ Public Module ConstIni
    Public Const S_MRUFILES As String = "MruFiles"
    Public Const S_MRUIMPORTFILES As String = "MruImportFiles"
 
+   Public Const S_TEMPLETESEL As String = "TempleteSel"
+   Public Const K_CURRTEMPLETESEL As String = "CurrTempleteSel"
+
 End Module

Icarus/Constants/ConstMachIni.vb

@@ -10,6 +10,7 @@
    Public Const K_SLICINGTYPE As String = "SlicingType"
    Public Const K_SPEED_MIN As String = "SpeedMin"
    Public Const K_SPEED_MAX As String = "SpeedMax"
+   Public Const K_MAX_HEIGHT As String = "HMax"
 
    Public Const S_MINMAX As String = "MinMax"
 

Icarus/CurrMachiningPanel/CurrMachining.vb

@@ -111,6 +111,7 @@ Public Class CurrMachining
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.RIBS, nPartId, m_nIndex, False))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.SHELL_NUMBER, nPartId, m_nIndex, False))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.AUX_SOLID, nPartId, m_nIndex, False))
+      m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.INFILL, nPartId, m_nIndex, False))
       For Each Cathegory In m_CathegoryList
          For Each MachiningParam In Cathegory.MachiningParamList
             AddHandler MachiningParam.PropertyChanged, AddressOf OnMachiningParamPropertyChanged
@@ -128,6 +129,7 @@ Public Class CurrMachining
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.RIBS, nPartId, m_nIndex, True))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.SHELL_NUMBER, nPartId, m_nIndex, True))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.AUX_SOLID, nPartId, m_nIndex, True))
+      m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.INFILL, nPartId, m_nIndex, True))
       For Each Cathegory In m_CathegoryList
          For Each MachiningParam In Cathegory.MachiningParamList
             AddHandler MachiningParam.PropertyChanged, AddressOf OnMachiningParamPropertyChanged
@@ -209,7 +211,6 @@ Public Class CurrMachiningCathegory
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.STARTPOINTOFFSETONSLICE, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.STRANDORDER, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.DIRECTION, nPartId, nIndex, bForceFromDb, Me),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.G0FEED, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.G0FEEDZ, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.LINKZUP, nPartId, nIndex, bForceFromDb, Me),
@@ -219,15 +220,17 @@ Public Class CurrMachiningCathegory
                                                                 New CurrOrderedMachiningParam(MachiningParam.Params.PRINT_ORDER, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.PREFLOWDELAY, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.POSTFLOWDELAY, nPartId, nIndex, bForceFromDb, Me),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.SCREWBACK, nPartId, nIndex, bForceFromDb, Me)})
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.SCREWBACK, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.SLICINGHEIGHT, nPartId, nIndex, bForceFromDb, Me)})
          Case Cathegories.LINK
             m_sName = "Shell"
-            m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.LINKTYPE, nPartId, nIndex, bForceFromDb, Me),
+            m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.INNERSHELLWIDTH, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.OFFSETLEADPOINT, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrComboMachiningParam(MachiningParam.Params.LINKTYPE, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.LINKPARAM, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.LEADIN, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.LEADINTANGDIST, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.LEADINORTHODIST, nPartId, nIndex, bForceFromDb, Me),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.OFFSETLEADPOINT, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.LEADOUT, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.LEADOUTTANGDIST, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.LEADOUTORTHODIST, nPartId, nIndex, bForceFromDb, Me),
@@ -238,7 +241,8 @@ Public Class CurrMachiningCathegory
                                                                 'New CurrNumericMachiningParam(MachiningParam.Params.WIPEDIR, nPartId, nIndex, bForceFromDb, Me)})
          Case Cathegories.RIBS
             m_sName = "Ribs"
-            m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.RIBSTYPE, nPartId, nIndex, bForceFromDb, Me),
+            m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.RIBSSTRANDWIDTH, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrComboMachiningParam(MachiningParam.Params.RIBSTYPE, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrCheckMachiningParam(MachiningParam.Params.RIBSLIMITUNBOUNDEDWITHSOLID, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.RIBSSTRANDCOUNT, nPartId, nIndex, bForceFromDb, Me),
@@ -261,20 +265,47 @@ Public Class CurrMachiningCathegory
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.SHELLNBRWIPEDIR, nPartId, nIndex, bForceFromDb, Me)})
          Case Cathegories.AUX_SOLID
             m_sName = "Filled Solid"
-            m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nPartId, nIndex, bForceFromDb, Me),
+            m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDWIDTH, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.AUXSOLIDSINFILLLINK, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDCOUNT, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETLEADPOINT, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSDENSITY, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSGRIDOVERLAP, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSDIRECTION, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETX, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETY, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSCOASTINGLEN, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPELEN, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPEDIR, nPartId, nIndex, bForceFromDb, Me)})
+         Case Cathegories.INFILL
+            m_sName = "Infill"
+            m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.INFILLSTRANDWIDTH, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrComboMachiningParam(MachiningParam.Params.FLOORTYPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.CEILCOUNT, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrComboMachiningParam(MachiningParam.Params.CEILTYPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrComboMachiningParam(MachiningParam.Params.INFILLTYPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.INFILLLINK, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLDENSITY, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLGRIDOVERLAP, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLDIRECTION, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLOFFSETX, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLOFFSETY, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLOVERLAP, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLCOASTING, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLWIPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLWIPEDIR, nPartId, nIndex, bForceFromDb, Me)})
       End Select
       ' verifico dipendenze tra parametri
       Select Case m_Type
          Case Cathegories.LINK
-            For Each Param In {MachiningParam.Params.LINKTYPE, MachiningParam.Params.LEADIN}
+            For Each Param In {MachiningParam.Params.LINKTYPE, MachiningParam.Params.LEADIN, MachiningParam.Params.LEADOUT}
                Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
                MachiningParam.ManageDependencyParam()
             Next
@@ -288,6 +319,19 @@ Public Class CurrMachiningCathegory
                Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
                MachiningParam.ManageDependencyParam()
             Next
+            For Each Param In {MachiningParam.Params.AUXSOLIDSSTRANDCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
+         Case Cathegories.INFILL
+            For Each Param In {MachiningParam.Params.FLOORCOUNT, MachiningParam.Params.CEILCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
+            For Each Param In {MachiningParam.Params.INFILLTYPE}
+               Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
       End Select
    End Sub
 
@@ -320,14 +364,32 @@ Public Class CurrNumericMachiningParam
             StringToDouble(value, dTempValue)
          End If
          If m_bIsActiveMinMax Then
-            If dTempValue >= m_dMinValue AndAlso dTempValue <= m_dMaxValue Then
-               m_dValue = dTempValue
+            If m_MinMaxType = MinMaxTypes.ABSOLUT Then
+               If dTempValue >= m_dMinValue AndAlso dTempValue <= m_dMaxValue Then
+                  m_dValue = dTempValue
+               End If
+            ElseIf m_MinMaxType = MinMaxTypes.PERCENTAGE Then
+               Dim LinkedParam As MachiningParam = Nothing
+               ' cerco il parametro a cui e' collegato
+               For Each CurrCathegory In Map.refMachiningDbVM.SelMachining.CathegoryList
+                  LinkedParam = CurrCathegory.MachiningParamList.FirstOrDefault(Function(x) x.Type = m_MinMaxLinkedParam)
+                  If Not IsNothing(LinkedParam) Then Exit For
+               Next
+               If Not IsNothing(LinkedParam) AndAlso TypeOf LinkedParam Is NumericMachiningParam Then
+                  Dim NumericLinkedParam As NumericMachiningParam = DirectCast(LinkedParam, NumericMachiningParam)
+                  If dTempValue >= NumericLinkedParam.dValue * m_dMinValue / 100 AndAlso dTempValue <= NumericLinkedParam.dValue * m_dMaxValue / 100 Then
+                     m_dValue = dTempValue
+                  End If
+               Else
+                  m_dValue = dTempValue
+               End If
             End If
          Else
             m_dValue = dTempValue
          End If
          NotifyPropertyChanged(NameOf(sValue))
          NotifyPropertyChanged(NameOf(bIsModifiedFromDb))
+         ManageDependencyParam()
       End Set
    End Property
 
@@ -375,6 +437,9 @@ Public Class CurrNumericMachiningParam
          Case Params.LINKZUP
             bReadFromPart = EgtGetInfo(nPartId, MAC_LINKZUP, m_dValue)
             m_bIsLen = True
+         Case Params.INNERSHELLWIDTH
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INNERSHELLWIDTH, m_dValue)
+            m_bIsLen = True
          Case Params.OFFSETLEADPOINT
             bReadFromPart = EgtGetInfo(nPartId, MAC_OFFSETLEADPOINT, m_dValue)
             m_bIsLen = True
@@ -426,6 +491,12 @@ Public Class CurrNumericMachiningParam
          Case Params.SCREWBACK
             bReadFromPart = EgtGetInfo(nPartId, MAC_SCREWBACK, m_dValue)
             m_bIsLen = True
+         Case Params.SLICINGHEIGHT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_SLICINGHEIGHT, m_dValue)
+            m_bIsLen = True
+         Case Params.RIBSSTRANDWIDTH
+            bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSSTRANDWIDTH, m_dValue)
+            m_bIsLen = True
          Case Params.RIBSOVERLAP
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSOVERLAP, m_dValue)
             m_bIsLen = False
@@ -459,15 +530,39 @@ Public Class CurrNumericMachiningParam
          Case Params.SHELLNBRWIPEDIR
             bReadFromPart = EgtGetInfo(nPartId, MAC_SHELLNBRWIPEDIR, m_dValue)
             m_bIsLen = False
+         Case Params.AUXSOLIDSSTRANDWIDTH
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSSTRANDWIDTH, m_dValue)
+            m_bIsLen = True
          Case Params.AUXSOLIDSOVERLAP
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSOVERLAP, m_dValue)
             m_bIsLen = False
          Case Params.AUXSOLIDSLINKPARAM
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSLINKPARAM, m_dValue)
             m_bIsLen = True
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSSTRANDCOUNT, m_dValue)
+            m_bIsLen = False
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, m_dValue)
             m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETLEADPOINT, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSDENSITY
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSDENSITY, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSGRIDOVERLAP, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSDIRECTION
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSDIRECTION, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETX
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETX, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETY
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETY, m_dValue)
+            m_bIsLen = True
          Case Params.AUXSOLIDSCOASTINGLEN
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSCOASTINGLEN, m_dValue)
             m_bIsLen = True
@@ -480,27 +575,66 @@ Public Class CurrNumericMachiningParam
          Case Params.FLOWRATE_PC
             bReadFromPart = EgtGetInfo(nPartId, MAC_CONSTANT, m_dValue)
             m_bIsLen = False
+         Case Params.CEILCOUNT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_CEILCOUNT, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLSTRANDWIDTH
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLSTRANDWIDTH, m_dValue)
+            m_bIsLen = True
+         Case Params.INFILLDENSITY
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLDENSITY, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLOVERLAP
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLOVERLAP, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLGRIDOVERLAP
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLGRIDOVERLAP, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLDIRECTION
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLDIRECTION, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLOFFSETX
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLOFFSETX, m_dValue)
+            m_bIsLen = True
+         Case Params.INFILLOFFSETY
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLOFFSETY, m_dValue)
+            m_bIsLen = True
+         Case Params.INFILLCOASTING
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLCOASTING, m_dValue)
+            m_bIsLen = True
+         Case Params.INFILLWIPE
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLWIPE, m_dValue)
+            m_bIsLen = True
+         Case Params.INFILLWIPEDIR
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLWIPEDIR, m_dValue)
+            m_bIsLen = False
       End Select
       m_dOrigValue = m_dValue
       If nIndex > 0 Then
          Dim DbMachining As Machining = Map.refMachiningDbVM.MachiningList.FirstOrDefault(Function(x) x.nIndex = nIndex)
          Select Case Type
             Case Params.STRANDH, Params.STRANDW, Params.STRANDCOUNT, Params.OFFSET, Params.STRANDOVERLAP, Params.STARTPOINTOFFSETONSLICE,
-                 Params.FLOORCOUNT, Params.G0FEED, Params.G0FEEDZ, Params.LINKZUP, Params.TOOLDIAM, Params.FLOWRATE_PC, Params.PREFLOWDELAY, Params.POSTFLOWDELAY, Params.SCREWBACK
+                 Params.G0FEED, Params.G0FEEDZ, Params.LINKZUP, Params.TOOLDIAM, Params.FLOWRATE_PC, Params.PREFLOWDELAY, Params.POSTFLOWDELAY, Params.SCREWBACK, Params.SLICINGHEIGHT
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            Case Params.LINKPARAM, Params.OFFSETLEADPOINT, Params.LEADINTANGDIST, Params.LEADINORTHODIST,
+            Case Params.LINKPARAM, Params.INNERSHELLWIDTH, Params.OFFSETLEADPOINT, Params.LEADINTANGDIST, Params.LEADINORTHODIST,
                  Params.LEADOUTTANGDIST, Params.LEADOUTORTHODIST, Params.COASTINGLEN, Params.COASTINGFEED_PC,
                  Params.WIPELEN, Params.WIPEFEED_PC  ' Params.WIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.LINK).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            Case Params.RIBSOVERLAP, Params.RIBSSTRANDCOUNT, Params.RIBSLINK, Params.RIBSINVERTORDER, Params.RIBSINVERTDIRECTION,
+            Case Params.RIBSSTRANDWIDTH, Params.RIBSOVERLAP, Params.RIBSSTRANDCOUNT, Params.RIBSLINK, Params.RIBSINVERTORDER, Params.RIBSINVERTDIRECTION,
                  Params.RIBSLEADININVERT, Params.RIBSLEADINLEN, Params.RIBSLEADOUTINVERT, Params.RIBSLEADOUTLEN, Params.RIBSLEADOUTCOASTING,
                  Params.RIBSLEADOUTWIPE, Params.RIBSLEADOUTWIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.RIBS).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.SHELLNBRDIFFERENCE, Params.SHELLNBRCOASTING, Params.SHELLNBRWIPE, Params.SHELLNBRWIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.SHELL_NUMBER).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
-            Case Params.AUXSOLIDSOVERLAP, Params.AUXSOLIDSLINKPARAM, Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE,
-                 Params.AUXSOLIDSCOASTINGLEN, Params.AUXSOLIDSWIPELEN, Params.AUXSOLIDSWIPEDIR
+            Case Params.AUXSOLIDSSTRANDWIDTH, Params.AUXSOLIDSOVERLAP, Params.AUXSOLIDSLINKPARAM, Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE,
+                 Params.AUXSOLIDSOFFSETLEADPOINT, Params.AUXSOLIDSDENSITY, Params.AUXSOLIDSGRIDOVERLAP,
+                 Params.AUXSOLIDSDIRECTION, Params.AUXSOLIDSOFFSETX, Params.AUXSOLIDSOFFSETY,
+                 Params.AUXSOLIDSCOASTINGLEN, Params.AUXSOLIDSWIPELEN, Params.AUXSOLIDSWIPEDIR, Params.AUXSOLIDSSTRANDCOUNT
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.INFILLSTRANDWIDTH, Params.FLOORCOUNT, Params.CEILCOUNT, Params.INFILLDENSITY, Params.INFILLOVERLAP,
+                 Params.INFILLGRIDOVERLAP, Params.INFILLDIRECTION, Params.INFILLOFFSETX,
+                 Params.INFILLOFFSETY, Params.INFILLCOASTING, Params.INFILLWIPE, Params.INFILLWIPEDIR
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.INFILL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
          If bForceFromDb OrElse Not bReadFromPart Then
             m_dValue = m_DbParam.dOrigValue
@@ -539,6 +673,8 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_LINKPARAM, sWriteValue)
          Case Params.LINKZUP
             EgtSetInfo(nPartId, MAC_LINKZUP, sWriteValue)
+         Case Params.INNERSHELLWIDTH
+            EgtSetInfo(nPartId, MAC_INNERSHELLWIDTH, sWriteValue)
          Case Params.OFFSETLEADPOINT
             EgtSetInfo(nPartId, MAC_OFFSETLEADPOINT, sWriteValue)
          Case Params.LEADINTANGDIST
@@ -573,6 +709,10 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_POSTFLOWDELAY, sWriteValue)
          Case Params.SCREWBACK
             EgtSetInfo(nPartId, MAC_SCREWBACK, sWriteValue)
+         Case Params.SLICINGHEIGHT
+            EgtSetInfo(nPartId, MAC_SLICINGHEIGHT, sWriteValue)
+         Case Params.RIBSSTRANDWIDTH
+            EgtSetInfo(nPartId, MAC_RIBSSTRANDWIDTH, sWriteValue)
          Case Params.RIBSOVERLAP
             EgtSetInfo(nPartId, MAC_RIBSOVERLAP, sWriteValue)
          Case Params.RIBSSTRANDCOUNT
@@ -595,12 +735,28 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_SHELLNBRWIPE, sWriteValue)
          Case Params.SHELLNBRWIPEDIR
             EgtSetInfo(nPartId, MAC_SHELLNBRWIPEDIR, sWriteValue)
+         Case Params.AUXSOLIDSSTRANDWIDTH
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSSTRANDWIDTH, sWriteValue)
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSSTRANDCOUNT, sWriteValue)
          Case Params.AUXSOLIDSOVERLAP
             EgtSetInfo(nPartId, MAC_AUXSOLIDSOVERLAP, sWriteValue)
          Case Params.AUXSOLIDSLINKPARAM
             EgtSetInfo(nPartId, MAC_AUXSOLIDSLINKPARAM, sWriteValue)
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             EgtSetInfo(nPartId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, sWriteValue)
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSOFFSETLEADPOINT, sWriteValue)
+         Case Params.AUXSOLIDSDENSITY
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSDENSITY, sWriteValue)
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSGRIDOVERLAP, sWriteValue)
+         Case Params.AUXSOLIDSDIRECTION
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSDIRECTION, sWriteValue)
+         Case Params.AUXSOLIDSOFFSETX
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSOFFSETX, sWriteValue)
+         Case Params.AUXSOLIDSOFFSETY
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSOFFSETY, sWriteValue)
          Case Params.AUXSOLIDSCOASTINGLEN
             EgtSetInfo(nPartId, MAC_AUXSOLIDSCOASTINGLEN, sWriteValue)
          Case Params.AUXSOLIDSWIPELEN
@@ -609,6 +765,28 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_AUXSOLIDSWIPEDIR, sWriteValue)
          Case Params.FLOWRATE_PC
             EgtSetInfo(nPartId, MAC_CONSTANT, sWriteValue)
+         Case Params.INFILLSTRANDWIDTH
+            EgtSetInfo(nPartId, MAC_INFILLSTRANDWIDTH, sWriteValue)
+         Case Params.CEILCOUNT
+            EgtSetInfo(nPartId, MAC_CEILCOUNT, sWriteValue)
+         Case Params.INFILLDENSITY
+            EgtSetInfo(nPartId, MAC_INFILLDENSITY, sWriteValue)
+         Case Params.INFILLOVERLAP
+            EgtSetInfo(nPartId, MAC_INFILLOVERLAP, sWriteValue)
+         Case Params.INFILLGRIDOVERLAP
+            EgtSetInfo(nPartId, MAC_INFILLGRIDOVERLAP, sWriteValue)
+         Case Params.INFILLDIRECTION
+            EgtSetInfo(nPartId, MAC_INFILLDIRECTION, sWriteValue)
+         Case Params.INFILLOFFSETX
+            EgtSetInfo(nPartId, MAC_INFILLOFFSETX, sWriteValue)
+         Case Params.INFILLOFFSETY
+            EgtSetInfo(nPartId, MAC_INFILLOFFSETY, sWriteValue)
+         Case Params.INFILLCOASTING
+            EgtSetInfo(nPartId, MAC_INFILLCOASTING, sWriteValue)
+         Case Params.INFILLWIPE
+            EgtSetInfo(nPartId, MAC_INFILLWIPE, sWriteValue)
+         Case Params.INFILLWIPEDIR
+            EgtSetInfo(nPartId, MAC_INFILLWIPEDIR, sWriteValue)
       End Select
    End Sub
 
@@ -811,9 +989,14 @@ Public Class CurrComboMachiningParam
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSTYPE, nSelValue)
             m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
          Case Params.AUXSOLIDSINFILL
-            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL.NONE, "None"),
-                                                     New IdNameStruct(Machining.MPAR_INFILL.OFFSET, "Offset"),
-                                                     New IdNameStruct(Machining.MPAR_INFILL.ZIGZAG, "ZigZag")})
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
             Dim nSelValue As Integer = 0
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSINFILL, nSelValue)
             m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
@@ -836,6 +1019,28 @@ Public Class CurrComboMachiningParam
             Dim nSelValue As Integer = 0
             bReadFromPart = EgtGetInfo(nPartId, MAC_DYNAMICMODE, nSelValue)
             m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+         Case Params.FLOORTYPE
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag")})
+            Dim nSelValue As Integer = 0
+            bReadFromPart = EgtGetInfo(nPartId, MAC_FLOORTYPE, nSelValue)
+            m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+         Case Params.CEILTYPE
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag")})
+            Dim nSelValue As Integer = 0
+            bReadFromPart = EgtGetInfo(nPartId, MAC_CEILTYPE, nSelValue)
+            m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+         Case Params.INFILLTYPE
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
+            Dim nSelValue As Integer = 0
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLTYPE, nSelValue)
+            m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
       End Select
       m_OrigSelValue = m_SelValue
       If nIndex > 0 Then
@@ -849,6 +1054,8 @@ Public Class CurrComboMachiningParam
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.RIBS).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.AUXSOLIDSINFILL, Params.AUXSOLIDSSTRANDORDER, Params.AUXSOLIDSLINKTYPE
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.FLOORTYPE, Params.CEILTYPE, Params.INFILLTYPE
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.INFILL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
          If bForceFromDb OrElse Not bReadFromPart Then
             m_SelValue = m_DbParam.OrigSelValue
@@ -887,6 +1094,12 @@ Public Class CurrComboMachiningParam
             EgtSetInfo(nPartId, MAC_AUXSOLIDSLINKTYPE, m_SelValue.Id)
          Case Params.DYNAMIC_MODE
             EgtSetInfo(nPartId, MAC_DYNAMICMODE, m_SelValue.Id)
+         Case Params.FLOORTYPE
+            EgtSetInfo(nPartId, MAC_FLOORTYPE, m_SelValue.Id)
+         Case Params.CEILTYPE
+            EgtSetInfo(nPartId, MAC_CEILTYPE, m_SelValue.Id)
+         Case Params.INFILLTYPE
+            EgtSetInfo(nPartId, MAC_INFILLTYPE, m_SelValue.Id)
       End Select
    End Sub
 
@@ -976,6 +1189,10 @@ Public Class CurrCheckMachiningParam
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLEADOUTINVERT, m_bValue)
          Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, m_bValue)
+         Case Params.AUXSOLIDSINFILLLINK
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSINFILLLINK, m_bValue)
+         Case Params.INFILLLINK
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLLINK, m_bValue)
       End Select
       m_bOrigValue = m_bValue
       If nIndex > 0 Then
@@ -985,6 +1202,10 @@ Public Class CurrCheckMachiningParam
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.RIBSLINK, Params.RIBSINVERTORDER, Params.RIBSINVERTDIRECTION, Params.RIBSINVERTSTRANDORDER, Params.RIBSLEADININVERT, Params.RIBSLEADOUTINVERT, Params.RIBSLIMITUNBOUNDEDWITHSOLID
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.RIBS).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.AUXSOLIDSINFILLLINK
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.INFILLLINK
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.INFILL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
          If bForceFromDb OrElse Not bReadFromPart Then
             m_bValue = m_DbParam.bOrigValue
@@ -1011,6 +1232,10 @@ Public Class CurrCheckMachiningParam
             EgtSetInfo(nPartId, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0))
          Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
             EgtSetInfo(nPartId, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, If(m_bValue, 1, 0))
+         Case Params.AUXSOLIDSINFILLLINK
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSINFILLLINK, If(m_bValue, 1, 0))
+         Case Params.INFILLLINK
+            EgtSetInfo(nPartId, MAC_INFILLLINK, If(m_bValue, 1, 0))
       End Select
    End Sub
 

Icarus/CurrMachiningPanel/CurrMachiningPanelV.xaml

@@ -54,9 +54,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="Auto"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <EgtWPFLib5:EgtTextBox2 Grid.Column="1"
                                                             Text="{Binding sValue, UpdateSourceTrigger=Explicit}"
                                                             Margin="2.5,0,2.5,0"
@@ -79,9 +86,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="Auto"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <ComboBox Grid.Column="1"
                                               ItemsSource="{Binding ValueList}"
                                               SelectedItem="{Binding SelValue}"
@@ -107,9 +121,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="Auto"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <CheckBox Grid.Column="1"
                                               IsChecked="{Binding bValue}"
                                               HorizontalAlignment="Center"

Icarus/EgtColorPicker/EgtColorPickerV.xaml

@@ -0,0 +1,324 @@
+<EgtWPFLib5:EgtMainWindow x:Class="EgtColorPickerV"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+        Title="{Binding sTitle}"
+        SizeToContent="WidthAndHeight"
+        WindowStartupLocation="CenterOwner"
+        Style="{StaticResource Dialog_Window}">
+
+   <Grid Margin="5,5,5,0">
+      <Grid.RowDefinitions>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="Auto"/>
+      </Grid.RowDefinitions>
+      <Grid>
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="Auto"/>
+         </Grid.ColumnDefinitions>
+         <Grid Margin="5,5,5,0">
+            <Grid.RowDefinitions>
+               <RowDefinition Height="Auto"/>
+               <RowDefinition Height="Auto"/>
+               <RowDefinition Height="Auto"/>
+               <RowDefinition Height="Auto"/>
+            </Grid.RowDefinitions>
+            <TextBlock Grid.Row="0" 
+                       Text="{Binding BasicColor_Msg}"
+                       Margin="5,0,5,0"
+                       Style="{StaticResource DialogWindow_TextBlock}"/>
+            <ListBox Grid.Row="1" 
+                     ItemsSource="{Binding BasicColors}"
+                     SelectedItem="{Binding SelColor}"
+                     HorizontalAlignment="Center">
+               <ListBox.ItemsPanel>
+                  <ItemsPanelTemplate>
+                     <UniformGrid Columns="8"/>
+                  </ItemsPanelTemplate>
+               </ListBox.ItemsPanel>
+               <ListBox.ItemTemplate>
+                  <DataTemplate>
+                     <Rectangle Width="20"
+                                Height="20"
+                                Margin="4"
+                                Stroke="Black" 
+                                StrokeThickness="0.5"
+                                Fill="{Binding Fill}"/>
+                  </DataTemplate>
+               </ListBox.ItemTemplate>
+            </ListBox>
+            <TextBlock Grid.Row="2" 
+                       Text="{Binding CustomColor_Msg}"
+                       Margin="5,0,5,0"
+                       Style="{StaticResource DialogWindow_TextBlock}"/>
+            <ListBox Grid.Row="3"
+                     Margin="5,0,0,0"
+                     ItemsSource="{Binding CustomColors}"
+                     SelectedItem="{Binding SelCustomColor}"
+                     HorizontalAlignment="Center">
+               <ListBox.ItemsPanel>
+                  <ItemsPanelTemplate>
+                     <UniformGrid Columns="8"/>
+                  </ItemsPanelTemplate>
+               </ListBox.ItemsPanel>
+               <ListBox.ItemTemplate>
+                  <DataTemplate>
+                     <Rectangle Width="20"
+                                Height="20"
+                                Margin="4"
+                                Stroke="Black" 
+                                StrokeThickness="0.5"
+                                Fill="{Binding Fill}"/>
+                  </DataTemplate>
+               </ListBox.ItemTemplate>
+            </ListBox>
+         </Grid>
+         <Grid Grid.Column="1">
+            <Grid.RowDefinitions>
+               <RowDefinition Height="1*" />
+               <RowDefinition Height="Auto" />
+            </Grid.RowDefinitions>
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="Auto"/>
+               </Grid.ColumnDefinitions>
+               <Grid x:Name="CanvasGrid"
+                     VerticalAlignment="Stretch"
+                     HorizontalAlignment="Stretch"
+                     Margin="5,10,5,0">
+                  <Canvas x:Name="MyCanvas"
+                          MouseDown="ColorRectangle_MouseDown"
+                          HorizontalAlignment="Left"
+                          VerticalAlignment="Top"
+                          Width="260"
+                          Height="{Binding ActualHeight, ElementName=CanvasGrid}">
+                     <Rectangle Grid.Column="0"                    
+                                Width="{Binding ActualWidth, ElementName=MyCanvas}"
+                                Height="{Binding ActualHeight, ElementName=MyCanvas}"
+                                Stroke="Black" 
+                                StrokeThickness="0.5"
+                                IsEnabled="True">
+                        <Rectangle.Fill>
+                           <LinearGradientBrush StartPoint="0, 0.5" EndPoint="1.6, 0.5" >
+                              <GradientStop Color="Red" Offset="0" />
+                              <GradientStop Color="Yellow" Offset="0.1" />
+                              <GradientStop Color="Lime" Offset="0.2" />
+                              <GradientStop Color="Cyan" Offset="0.3" />
+                              <GradientStop Color="Blue" Offset="0.4" />
+                              <GradientStop Color="Purple" Offset="0.5" />
+                              <GradientStop Color="Red" Offset="0.6" />
+                           </LinearGradientBrush>
+                        </Rectangle.Fill>
+                     </Rectangle>
+                     <Rectangle Grid.Column="0"
+                                Width="{Binding ActualWidth, ElementName=MyCanvas}"
+                                Height="{Binding ActualHeight, ElementName=MyCanvas}"
+                                Stroke="Black" 
+                                StrokeThickness="0.5"
+                                IsEnabled="True">
+                        <Rectangle.Fill>
+                           <LinearGradientBrush StartPoint="0.5, 0" EndPoint="0.5, 1" >
+                              <GradientStop Color="#00ffffff" Offset="0" />
+                              <GradientStop Color="Gray" Offset="1" />
+                           </LinearGradientBrush>
+                        </Rectangle.Fill>
+                     </Rectangle>
+                     <Ellipse x:Name="Ellipse" 
+                              Stroke="Black" 
+                              StrokeThickness="1"
+                              Width="15" 
+                              Height="15"/>
+                  </Canvas>
+               </Grid>
+               <Grid x:Name="CanvasGridL"
+                     VerticalAlignment="Stretch"
+                     HorizontalAlignment="Stretch"
+                     Grid.Column="1"
+                     Margin="5,10,10,0">
+                  <Canvas x:Name="MyCanvasL"
+                          MouseMove="Luminosity_MouseMove"
+                          MouseDown="Luminosity_MouseDown"
+                          HorizontalAlignment="Right"
+                          VerticalAlignment="Top"
+                          Height="{Binding ActualHeight, ElementName=CanvasGridL}"
+                          Width="20">
+                     <!--<Rectangle x:Name="LRect"
+                                Grid.Column="1"
+                                Width="20"
+                                Height="{Binding ActualHeight, ElementName=MyCanvasL}"  
+                                Stroke="Black" 
+                                StrokeThickness="0.5"
+                                Fill="{Binding Luminosity_Fill}"/>-->
+                     <Rectangle Grid.Column="1"
+                                Width="20"
+                                Height="{Binding ActualHeight, ElementName=MyCanvasL}"
+                                Stroke="Black" 
+                                StrokeThickness="0.5">
+                        <Rectangle.Fill>
+                           <LinearGradientBrush StartPoint="0.5, 0" EndPoint="0.5, 1" >
+                              <GradientStop Color="White" Offset="0" />
+                              <GradientStop x:Name="LightnessColor" Offset="0.5"/>
+                              <GradientStop Color="Black" Offset="1" />
+                           </LinearGradientBrush>
+                        </Rectangle.Fill>
+                     </Rectangle>
+                     <Path x:Name="Arrow"
+                           Grid.Column="1"
+                           Data="M0,0 l4,4 l0,2 l-4,-4 l-4,4 l0,-2 z "
+                           Canvas.Left="0" 
+                           Canvas.Top="10"
+                           Stroke="Black"
+                           Fill="Black"
+                           StrokeThickness="1">
+                           <!--Data="M13.5,10.697 l-3.497-3.6,-3.497,3.6 L6.494,8.328 l3.503-3.631 l3.48,3.592 L13.494,10.697z"-->
+                        <Path.RenderTransform>
+                           <RotateTransform Angle="270" />
+                        </Path.RenderTransform>
+                     </Path>
+                  </Canvas>
+               </Grid>
+            </Grid>
+            <Grid Grid.Row="1" >
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="Auto"/>
+                  <ColumnDefinition Width="1*"/>
+               </Grid.ColumnDefinitions>
+               <Grid Margin="0,10,5,0"
+                     HorizontalAlignment="Left">
+                  <Grid.RowDefinitions>
+                     <RowDefinition Height="1*" />
+                     <RowDefinition Height="Auto" />
+                  </Grid.RowDefinitions>
+                  <Rectangle Width="100" 
+                             Height="70" 
+                             Stroke="Black" 
+                             StrokeThickness="0.5"
+                             Fill="{Binding CurrColor}"/>
+                  <Button x:Name="SaveColor"
+                          Grid.Row="1"
+                          Margin="0,5,0,0"
+                          Content="{Binding AddCColor_Msg}"
+                          Command="{Binding SaveColor_Command}"  
+                          Style="{StaticResource LeftPanel_TextButton}"/>
+               </Grid>
+               <Grid Grid.Column="2">
+                  <Grid.ColumnDefinitions>
+                     <ColumnDefinition Width="1*" />
+                     <ColumnDefinition Width="1*" />
+                     <ColumnDefinition Width="1*" />
+                     <ColumnDefinition Width="1*" />
+                  </Grid.ColumnDefinitions>
+                  <Grid.RowDefinitions>
+                     <RowDefinition Height="1*"/>
+                     <RowDefinition Height="1*"/>
+                     <RowDefinition Height="1*"/>
+                     <RowDefinition Height="1*"/>
+                  </Grid.RowDefinitions>
+                  <TextBlock Text="{Binding Red_Msg}"
+                             Margin="0,10,5,0"
+                             HorizontalAlignment="Right"
+                             Style="{StaticResource DialogWindow_TextBlock}"/>
+                  <TextBox Grid.Column="1" 
+                           HorizontalAlignment="Right"
+                           Margin="0,10,5,0"
+                           IsReadOnly="False"
+                           Text="{Binding Red, UpdateSourceTrigger=PropertyChanged}"
+                           Style="{StaticResource ParameterList_TextBox}"/>
+                  <TextBlock Grid.Row="1"
+                             Text="{Binding Green_Msg}"
+                             Margin="5,5,5,0"
+                             HorizontalAlignment="Right"
+                             Style="{StaticResource DialogWindow_TextBlock}"/>
+                  <TextBox Grid.Column="1"
+                           Grid.Row="1"
+                           HorizontalAlignment="Right"
+                           Margin="5,5,5,0"
+                           IsReadOnly="False"
+                           Text="{Binding Green, UpdateSourceTrigger=PropertyChanged}"
+                           Style="{StaticResource ParameterList_TextBox}"/>
+                  <TextBlock Grid.Row="2"
+                             Text="{Binding Blu_Msg}"
+                             Margin="5,5,5,0"
+                             HorizontalAlignment="Right"
+                             Style="{StaticResource DialogWindow_TextBlock}"/>
+                  <TextBox Grid.Column="1"
+                           Grid.Row="2"
+                           HorizontalAlignment="Right"
+                           Margin="5,5,5,0"
+                           IsReadOnly="False"
+                           Text="{Binding Blue, UpdateSourceTrigger=PropertyChanged}"
+                           Style="{StaticResource ParameterList_TextBox}"/>
+                  <TextBlock Grid.Column="2"
+                             Text="H"
+                             Margin="0,10,5,0"
+                             HorizontalAlignment="Right"
+                             Style="{StaticResource DialogWindow_TextBlock}"/>
+                  <TextBox Grid.Column="3" 
+                           HorizontalAlignment="Right"
+                           Margin="0,10,5,0"
+                           IsReadOnly="False"
+                           Text="{Binding Hue, UpdateSourceTrigger=PropertyChanged}"
+                           Style="{StaticResource ParameterList_TextBox}"/>
+                  <TextBlock Grid.Row="1"
+                             Grid.Column="2"
+                             Text="S"
+                             Margin="5,5,5,0"
+                             HorizontalAlignment="Right"
+                             Style="{StaticResource DialogWindow_TextBlock}"/>
+                  <TextBox Grid.Column="3"
+                           Grid.Row="1"
+                           HorizontalAlignment="Right"
+                           Margin="5,5,5,0"
+                           IsReadOnly="False"
+                           Text="{Binding Saturation, UpdateSourceTrigger=PropertyChanged}"
+                           Style="{StaticResource ParameterList_TextBox}"/>
+                  <TextBlock Grid.Row="2"
+                             Grid.Column="2"
+                             Text="L"
+                             Margin="5,5,5,0"
+                             HorizontalAlignment="Right"
+                             Style="{StaticResource DialogWindow_TextBlock}"/>
+                  <TextBox Grid.Column="3"
+                           Grid.Row="2"
+                           HorizontalAlignment="Right"
+                           Margin="5,5,5,0"
+                           IsReadOnly="False"
+                           Text="{Binding Lightness, UpdateSourceTrigger=PropertyChanged}"
+                           Style="{StaticResource ParameterList_TextBox}"/>
+                  <TextBlock Grid.Row="3"
+                             Grid.ColumnSpan="2"
+                             Text="{Binding Hexadecimal_Msg}"
+                             Margin="5,5,5,0"
+                             HorizontalAlignment="Right"
+                             Style="{StaticResource DialogWindow_TextBlock}"/>
+                  <TextBox Grid.Column="2"
+                           Grid.ColumnSpan="2"
+                           Grid.Row="3"
+                           HorizontalAlignment="Right"
+                           Margin="5,5,5,0"
+                           Text="{Binding Hexadecimal, UpdateSourceTrigger=PropertyChanged}"
+                           Style="{StaticResource ParameterList_TextBox}"/>
+
+               </Grid>
+            </Grid>
+         </Grid>
+      </Grid>
+      <UniformGrid Grid.Row="2"  
+                   Rows="1"
+                   Margin="10,10,10,0">
+         <Button IsDefault="True"
+                 Content="OK"
+                 Command="{Binding Ok_Command}"
+                 Margin="2.5,0,2.5,0"
+                 Style="{StaticResource RightPanel_HalfRound_Button}"/>
+         <Button Content="Cancel"
+                 Command="{Binding Cancel_Command}"
+                 Margin="2.5,0,2.5,0"
+                 Style="{StaticResource RightPanel_HalfRound_Button}"/>
+      </UniformGrid>
+   </Grid>
+</EgtWPFLib5:EgtMainWindow>

Icarus/EgtColorPicker/EgtColorPickerV.xaml.vb

@@ -0,0 +1,313 @@
+Imports System.Drawing.Configuration
+Imports System.Runtime.InteropServices
+Imports System.Windows.Forms
+
+Public Class EgtColorPickerV
+
+#Region "FIELDS & PROPERTIES"
+
+   Private WithEvents m_EgtColorPickerVM As EgtColorPickerVM
+
+   Private Shadows DialogResult As DialogResult
+
+   Public Property CustomColors As Integer()
+      Get
+         Return m_EgtColorPickerVM.GetCustomColors()
+      End Get
+      Set(value As Integer())
+         m_EgtColorPickerVM.SetCustomColors(value)
+      End Set
+   End Property
+
+   Public Property Color As System.Drawing.Color
+      Get
+         Dim RgbColor As Color = HSLColor.HslToRgb(m_EgtColorPickerVM.HSLColor)
+         Return System.Drawing.Color.FromArgb(255, RgbColor.R, RgbColor.G, RgbColor.B)
+      End Get
+      Set(value As System.Drawing.Color)
+         m_EgtColorPickerVM.SetHSLColor(System.Windows.Media.Color.FromArgb(255, value.R, value.G, value.B))
+      End Set
+   End Property
+
+   Private m_dH As Double = 0
+   Private m_dS As Double = 0
+   Private m_dL As Double = 0.5
+
+#End Region    ' FIELDS & PROPERTIES
+
+#Region "CONTRUCTORS"
+
+   Sub New(Owner As Window, EtgColorPickerVM As EgtColorPickerVM)
+      MyBase.New(Owner)
+      InitializeComponent()
+      Me.DataContext = EtgColorPickerVM
+      ' Assegno al riferimento locale al VM il VM preso dal DataContext
+      m_EgtColorPickerVM = EtgColorPickerVM
+   End Sub
+
+#End Region
+
+#Region "EVENTS"
+
+   Private Sub CloseWindow(DialogResult As MessageBoxResult) Handles m_EgtColorPickerVM.m_CloseWindow
+      Me.DialogResult = DialogResult
+      Me.Close()
+   End Sub
+
+   Private Sub EgtColorPickerVM_SetLuminosityFill(color As Color) Handles m_EgtColorPickerVM.m_SetLuminosityFill
+      LightnessColor.Color = color
+   End Sub
+
+   Private Sub EgtColorPickerVM_SetLuminosityFills() Handles m_EgtColorPickerVM.m_UpdateCursorsPos
+      Dim dX As Double = m_EgtColorPickerVM.HSLColor.Hue / 360 * MyCanvas.ActualWidth
+      Dim dY As Double = (1 - m_EgtColorPickerVM.HSLColor.Saturation) * MyCanvas.ActualHeight
+      Dim dYL As Double = (1 - m_EgtColorPickerVM.HSLColor.Lightness) * MyCanvasL.ActualHeight
+      Canvas.SetLeft(Ellipse, dX - (Ellipse.Width / 2))
+      Canvas.SetTop(Ellipse, dY - (Ellipse.Height / 2))
+      Canvas.SetTop(Arrow, dYL)
+      Canvas.SetLeft(Arrow, MyCanvasL.ActualWidth)
+   End Sub
+
+   Private Sub EgtColorPickerV_ContentRendered(sender As Object, e As EventArgs) Handles Me.ContentRendered
+      EgtColorPickerVM_SetLuminosityFills()
+   End Sub
+
+   ''' <summary>
+   ''' Seleziona il colore all'interno del rettangolo nominato ColorRectangle attraverso un'ellisse
+   ''' </summary>
+   Private Sub ColorRectangle_MouseDown(sender As Object, e As MouseButtonEventArgs)
+      Dim dX As Double = Mouse.GetPosition(MyCanvas).X
+      Dim dY As Double = Mouse.GetPosition(MyCanvas).Y
+
+      Dim sat As Double = dX / MyCanvas.ActualWidth * 360
+      Dim ton As Double = 1 - dY / MyCanvas.ActualHeight
+
+      m_EgtColorPickerVM.UpdateHue(Math.Round(sat, MidpointRounding.AwayFromZero))
+      m_EgtColorPickerVM.UpdateSaturation(Math.Round(ton, 2))
+      m_EgtColorPickerVM.UpdateLightness(0.5)
+
+      'Dim r, g, b As Integer
+
+      If dX > 0 AndAlso dX < MyCanvas.ActualWidth And dY > 0 AndAlso dY < MyCanvas.ActualHeight Then
+         Canvas.SetTop(Ellipse, dY - (Ellipse.Height / 2))
+         Canvas.SetLeft(Ellipse, dX - (Ellipse.Width / 2))
+         Canvas.SetTop(Arrow, MyCanvas.Height / 2)
+         Canvas.SetLeft(Arrow, MyCanvasL.ActualWidth)
+      End If
+
+      'HlsToRgb(sat, lum, 1 - ton, r, g, b)
+
+      'Dim colargb As System.Drawing.Color = ColorFromHSV(sat, ton, lum)
+
+      'Dim col As Color = Media.Color.FromRgb(colargb.R, colargb.G, colargb.B)
+      'Dim col As Color = Media.Color.FromRgb(r, g, b)
+      'm_EgtColorPickerVM.SetCurrColorFill(col)
+   End Sub
+
+   ''' <summary>
+   ''' Permette il movimento della freccia dall'alto verso il basso
+   ''' </summary>
+   Private Sub Luminosity_MouseMove(sender As Object, e As Input.MouseEventArgs)
+      'Dim dX As Double = Mouse.GetPosition(MyCanvasL).X
+      'Dim dY As Double = Mouse.GetPosition(MyCanvasL).Y
+
+      'If dX > 0 AndAlso dX < MyCanvasL.ActualWidth And dY > 0 AndAlso dY < MyCanvasL.ActualHeight Then
+      '   Arrow.Visibility = Visibility.Visible
+      '   Canvas.SetTop(Arrow, dY)
+      '   Canvas.SetLeft(Arrow, MyCanvasL.ActualWidth)
+      'Else
+      '   Arrow.Visibility = Visibility.Collapsed
+      'End If
+   End Sub
+
+   ''' <summary>
+   ''' Modifica la luminosità  del colore selezionato
+   ''' </summary>
+   Private Sub Luminosity_MouseDown(sender As Object, e As MouseButtonEventArgs)
+
+      Arrow.Visibility = Visibility.Visible
+      Dim dYPos As Double = Mouse.GetPosition(MyCanvasL).Y
+      Canvas.SetTop(Arrow, dYPos)
+
+      Dim dX As Double = Canvas.GetLeft(Ellipse)
+      Dim dY As Double = Canvas.GetTop(Ellipse)
+      Dim dL As Double = Mouse.GetPosition(MyCanvasL).Y
+
+      Dim sat As Double = dX / MyCanvas.ActualWidth * 360
+      Dim ton As Double = dY / MyCanvas.ActualHeight
+      Dim lum As Double = dL / MyCanvasL.ActualHeight
+
+      m_EgtColorPickerVM.UpdateLightness(1 - Math.Round(lum, 2))
+
+      Dim r, g, b As Integer
+
+      HslToRgb(m_dH, m_dS, 1 - m_dL, r, g, b)
+      '  HslToRgb(sat, 1 - ton, 1 - lum, r, g, b)
+      ' HlsToRgb(sat, 1 - lum, 1 - ton, r, g, b)
+
+      'Dim col As Color = Media.Color.FromRgb(r, g, b)
+      'm_EgtColorPickerVM.SetCurrColorFill(col)
+   End Sub
+#End Region
+
+#Region "METHODS"
+
+   Private Shared Function HslToRgb(ByVal h As Double, ByVal s As Double, ByVal l As Double, ByRef r As Integer, ByRef g As Integer, ByRef b As Integer) As Color
+      Dim dConversionH As Double = Math.Round(h, MidpointRounding.AwayFromZero)
+      Dim dConversionS As Double = Math.Round(s, 2)
+      Dim dConversionL As Double = Math.Round(l, 2)
+      Dim C As Double = (1 - Math.Abs(2 * dConversionL - 1)) * dConversionS
+      Dim X = C * (1 - Math.Abs((dConversionH / 60) Mod 2 - 1))
+      Dim m = dConversionL - C / 2
+      Dim dRPrimo As Double
+      Dim dGPrimo As Double
+      Dim dBPrimo As Double
+
+      If dConversionH >= 0 Then
+         If dConversionH < 60 Then
+            dRPrimo = C
+            dGPrimo = X
+            dBPrimo = 0
+         ElseIf dConversionH < 120 Then
+            dRPrimo = X
+            dGPrimo = C
+            dBPrimo = 0
+         ElseIf dConversionH < 180 Then
+            dRPrimo = 0
+            dGPrimo = C
+            dBPrimo = X
+         ElseIf dConversionH < 240 Then
+            dRPrimo = 0
+            dGPrimo = X
+            dBPrimo = C
+         ElseIf dConversionH < 300 Then
+            dRPrimo = X
+            dGPrimo = 0
+            dBPrimo = C
+         ElseIf dConversionH < 360 Then
+            dRPrimo = C
+            dGPrimo = 0
+            dBPrimo = X
+         End If
+      End If
+
+      r = (dRPrimo + m) * 255
+      g = (dGPrimo + m) * 255
+      b = (dBPrimo + m) * 255
+   End Function
+
+   Friend Shared Function RgbToHsl(ByVal r As Integer, ByVal g As Integer, ByVal b As Integer, ByRef h As Double, ByRef s As Double, ByRef l As Double) As Color
+      Dim dRPrimo As Double = r / 255
+      Dim dGPrimo As Double = g / 255
+      Dim dBPrimo As Double = b / 255
+      Dim CMax As Double = Math.Max(Math.Max(dRPrimo, dGPrimo), dBPrimo)
+      Dim CMin As Double = Math.Min(Math.Min(dRPrimo, dGPrimo), dBPrimo)
+      Dim Delta As Double = CMax - CMin
+      If Delta = 0 Then
+         h = 0
+      ElseIf CMax = dRPrimo Then
+         h = 60 * (((dGPrimo - dBPrimo) / Delta) Mod 6)
+      ElseIf CMax = dGPrimo Then
+         h = 60 * (((dBPrimo - dRPrimo) / Delta) + 2)
+      ElseIf CMax = dBPrimo Then
+         h = 60 * (((dRPrimo - dRPrimo) / Delta) + 4)
+      End If
+
+      l = (CMax + CMin) / 2
+
+      If Delta = 0 Then
+         s = 0
+      Else
+         s = Delta / (1 - Math.Abs(2 * l - 1))
+      End If
+   End Function
+
+
+
+
+
+   '''' <summary>
+   '''' Converte il colore selezionato da HLS ( tonalità, luminosità, saturazione) in RGB
+   '''' </summary>
+   '''' <param name="h">Tonalità del colore selezionato espressa in double</param>
+   '''' <param name="l">Luminosità del colore selezionato espressa in double</param>
+   '''' <param name="s">Saturazione del colore selezionato espressa in double</param>
+   '''' <param name="r">Colore Rosso restituito dalla funzione espresso in intero</param>
+   '''' <param name="g">Colore Verde restituito dalla funzione espresso in intero</param>
+   '''' <param name="b">Colore Blu restituito dalla funzione espresso in intero</param>
+   'Private Shared Sub HlsToRgb(ByVal h As Double, ByVal l As Double, ByVal s As Double, <Out> ByRef r As Integer, <Out> ByRef g As Integer, <Out> ByRef b As Integer)
+   '   Dim p2 As Double
+
+   '   If l <= 0.5 Then
+   '      p2 = l * (1 + s)
+   '   Else
+   '      p2 = l + s - l * s
+   '   End If
+
+   '   Dim p1 As Double = 2 * l - p2
+   '   Dim double_r, double_g, double_b As Double
+
+   '   If s = 0 Then
+   '      double_r = l
+   '      double_g = l
+   '      double_b = l
+   '   Else
+   '      double_r = QqhToRgb(p1, p2, h + 120)
+   '      double_g = QqhToRgb(p1, p2, h)
+   '      double_b = QqhToRgb(p1, p2, h - 120)
+   '   End If
+
+   '   r = CInt((double_r * 255.0))
+   '   g = CInt((double_g * 255.0))
+   '   b = CInt((double_b * 255.0))
+   'End Sub
+
+   'Private Shared Function QqhToRgb(ByVal q1 As Double, ByVal q2 As Double, ByVal hue As Double) As Double
+   '   If hue > 360 Then
+   '      hue -= 360
+   '   ElseIf hue < 0 Then
+   '      hue += 360
+   '   End If
+
+   '   If hue < 60 Then Return q1 + (q2 - q1) * hue / 60
+   '   If hue < 180 Then Return q2
+   '   If hue < 240 Then Return q1 + (q2 - q1) * (240 - hue) / 60
+   '   Return q1
+   'End Function
+
+   Public Shared Function ColorFromHSV(ByVal hue As Double, ByVal saturation As Double, ByVal value As Double) As System.Drawing.Color
+      Dim hi As Integer = Convert.ToInt32(Math.Floor(hue / 60)) Mod 6
+      Dim f As Double = hue / 60 - Math.Floor(hue / 60)
+      value *= 255
+      Dim v As Integer = Convert.ToInt32(value)
+      Dim p As Integer = Convert.ToInt32(value * (1 - saturation))
+      Dim q As Integer = Convert.ToInt32(value * (1 - f * saturation))
+      Dim t As Integer = Convert.ToInt32(value * (1 - (1 - f) * saturation))
+
+      If hi = 0 Then
+         Return System.Drawing.Color.FromArgb(255, v, t, p)
+      ElseIf hi = 1 Then
+         Return System.Drawing.Color.FromArgb(255, q, v, p)
+      ElseIf hi = 2 Then
+         Return System.Drawing.Color.FromArgb(255, p, v, t)
+      ElseIf hi = 3 Then
+         Return System.Drawing.Color.FromArgb(255, p, q, v)
+      ElseIf hi = 4 Then
+         Return System.Drawing.Color.FromArgb(255, t, p, v)
+      Else
+         Return System.Drawing.Color.FromArgb(255, v, p, q)
+      End If
+   End Function
+
+   ''' <summary>
+   ''' Apre una finestra EgtColorPicker
+   ''' </summary>
+   ''' <returns></returns>
+   Public Overloads Function ShowDialog() As DialogResult
+      MyBase.ShowDialog()
+      Return Me.DialogResult
+   End Function
+
+#End Region
+
+End Class

Icarus/EgtColorPicker/EgtColorPickerVM.vb

@@ -0,0 +1,873 @@
+Imports System.Windows.Forms
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class EgtColorPickerVM
+   Inherits VMBase
+
+#Region "FIELDS & PROPERTIES"
+
+   Friend Event m_CloseWindow(bDialogResult As MessageBoxResult)
+
+   Friend Event m_SetLuminosityFill(color As Color)
+   Friend Event m_UpdateCursorsPos()
+
+   Private m_sTitle As String = ""
+   Public ReadOnly Property sTitle As String
+      Get
+         Return m_sTitle
+      End Get
+   End Property
+
+   Private m_BasicColors As New List(Of EgtColorPicker)
+   Public Property BasicColors As List(Of EgtColorPicker)
+      Get
+         Return m_BasicColors
+      End Get
+      Set(value As List(Of EgtColorPicker))
+         m_BasicColors = value
+      End Set
+   End Property
+
+   Private m_CustomColors As New List(Of EgtColorPicker)
+   Public Property CustomColors As List(Of EgtColorPicker)
+      Get
+         Return m_CustomColors
+      End Get
+      Set(value As List(Of EgtColorPicker))
+         m_CustomColors = value
+      End Set
+   End Property
+
+   Friend Sub SetCustomColors(value As Integer())
+      Dim coloraRGB As System.Drawing.Color
+      Dim colorRGB As Color
+      For i As Integer = 0 To value.Length - 1
+         coloraRGB = System.Drawing.Color.FromArgb(value(i).ToString)
+         colorRGB = Color.FromRgb(coloraRGB.R, coloraRGB.G, coloraRGB.B)
+         m_CustomColors.Insert(i, New EgtColorPicker(New SolidColorBrush(colorRGB)))
+         m_CustomColors.RemoveAt(m_CustomColors.Count - 1)
+      Next
+      m_CustomColors.Reverse()
+      SelCustomColor = m_CustomColors(0)
+      NotifyPropertyChanged(NameOf(SelCustomColor))
+   End Sub
+
+   Friend Function GetCustomColors() As Integer()
+      Dim arrayColor As Integer() = New Integer(m_CustomColors.Count - 1) {}
+      Dim coloraRGB As System.Drawing.Color
+      Dim colorCode As Integer
+      For i As Integer = 0 To m_CustomColors.Count - 1
+         Dim intValue As Integer = Integer.Parse(m_CustomColors(i).Fill.ToString().TrimStart("#FF"), System.Globalization.NumberStyles.HexNumber)
+         coloraRGB = System.Drawing.Color.FromArgb(intValue)
+         'colorCode = BitConverter.ToInt32(New Byte() {coloraRGB.R, coloraRGB.G, coloraRGB.B, &H0}, i)
+         colorCode = coloraRGB.ToArgb()
+         'arrayColor.Append(colorCode)
+         arrayColor(i) = colorCode
+      Next
+      Return arrayColor
+   End Function
+
+   Private m_HSLColor As New HSLColor
+   Public ReadOnly Property HSLColor As HSLColor
+      Get
+         Return m_HSLColor
+      End Get
+   End Property
+   Friend Sub SetHSLColor(value As Color)
+      Dim dHue, dSaturation, dLightness As Double
+      HSLColor.RgbToHsl(value, dHue, dSaturation, dLightness)
+      m_HSLColor.SetHue(dHue)
+      m_HSLColor.SetSaturation(dSaturation)
+      m_HSLColor.SetLightness(dLightness)
+      NotifyPropertyChanged(NameOf(CurrColor))
+      SetLightnessColor()
+      UpdateHue()
+      UpdateSaturation()
+      UpdateLightness()
+      NotifyPropertyChanged(NameOf(Red))
+      NotifyPropertyChanged(NameOf(Green))
+      NotifyPropertyChanged(NameOf(Blue))
+      NotifyPropertyChanged(NameOf(Hexadecimal))
+      RaiseEvent m_UpdateCursorsPos()
+   End Sub
+
+   Private m_CurrColor As Color
+   Public ReadOnly Property CurrColor As SolidColorBrush
+      Get
+         Return New SolidColorBrush(HSLColor.HslToRgb(m_HSLColor.Hue, m_HSLColor.Saturation, m_HSLColor.Lightness))
+      End Get
+   End Property
+
+   Private m_SelColor As EgtColorPicker
+   Public Property SelColor As EgtColorPicker
+      Get
+         Return m_SelColor
+      End Get
+      Set(value As EgtColorPicker)
+         m_SelColor = value
+         SetHSLColor(value.Fill.Color)
+         'm_Fill = m_Color.Fill
+         'm_CurrColor = m_Color.Fill.Color
+         'm_Luminosity_Fill = m_Color.Fill.Color
+         'm_Red = m_Color.Fill.Color.R.ToString
+         'm_Green = m_Color.Fill.Color.G.ToString
+         'm_Blue = m_Color.Fill.Color.B.ToString
+         'm_Hexadecimal = "#" + System.Drawing.Color.FromArgb(m_Red, m_Green, m_Blue).ToArgb().ToString("X6")
+         'NotifyPropertyChanged(NameOf(Hexadecimal))
+         'NotifyPropertyChanged(NameOf(Fill))
+         'NotifyPropertyChanged(NameOf(CurrColor))
+         'NotifyPropertyChanged(NameOf(Luminosity_Fill))
+         'NotifyPropertyChanged(NameOf(Red))
+         'NotifyPropertyChanged(NameOf(Green))
+         'NotifyPropertyChanged(NameOf(Blue))
+         'If Not IsNothing(m_CustomColor) Then
+         '   m_CustomColor.SetFill(m_Color.Fill)
+         'End If
+      End Set
+   End Property
+
+   Private m_CustomColor As EgtColorPicker
+   Public Property SelCustomColor As EgtColorPicker
+      Get
+         Return m_CustomColor
+      End Get
+      Set(value As EgtColorPicker)
+         m_CustomColor = value
+         m_CurrColor = m_CustomColor.Fill.Color
+         m_Luminosity_Fill = m_CustomColor.Fill.Color
+         m_Red = m_CustomColor.Fill.Color.R.ToString
+         m_Green = m_CustomColor.Fill.Color.G.ToString
+         m_Blue = m_CustomColor.Fill.Color.B.ToString
+         m_Hexadecimal = "#" + System.Drawing.Color.FromArgb(m_Red, m_Green, m_Blue).ToArgb().ToString("X6")
+         NotifyPropertyChanged(NameOf(Hexadecimal))
+         NotifyPropertyChanged(NameOf(CurrColor))
+         NotifyPropertyChanged(NameOf(Luminosity_Fill))
+         NotifyPropertyChanged(NameOf(Red))
+         NotifyPropertyChanged(NameOf(Green))
+         NotifyPropertyChanged(NameOf(Blue))
+         UpdateHue()
+         UpdateSaturation()
+         UpdateLightness()
+      End Set
+   End Property
+
+   Private m_Fill As SolidColorBrush
+   Public ReadOnly Property Fill As SolidColorBrush
+      Get
+         Return m_Fill
+      End Get
+   End Property
+   Friend Sub SetCurrColorFill(value As Color)
+      m_CurrColor = value
+      SetRed(m_CurrColor.R)
+      SetGreen(m_CurrColor.G)
+      SetBlu(m_CurrColor.B)
+      SetHexadecimal(m_CurrColor.ToString)
+      NotifyPropertyChanged(NameOf(CurrColor))
+      NotifyPropertyChanged(NameOf(Luminosity_Fill))
+      UpdateHue()
+      UpdateSaturation()
+      UpdateLightness()
+   End Sub
+
+   Private m_Luminosity_Fill As Color
+   Public ReadOnly Property Luminosity_Fill As SolidColorBrush
+      Get
+         Return New SolidColorBrush(m_Luminosity_Fill)
+      End Get
+   End Property
+
+   Friend Sub SetLuminosityColorFill(value As Color)
+      m_CurrColor = value
+      SetRed(m_CurrColor.R)
+      SetGreen(m_CurrColor.G)
+      SetBlu(m_CurrColor.B)
+      SetHexadecimal(m_CurrColor.ToString)
+      NotifyPropertyChanged(NameOf(CurrColor))
+      RaiseEvent m_SetLuminosityFill(value)
+      UpdateHue()
+      UpdateSaturation()
+      UpdateLightness()
+   End Sub
+
+   Private m_Hexadecimal As String
+   Public Property Hexadecimal As String
+      Get
+         Dim RgbColor As Color = HSLColor.HslToRgb(m_HSLColor)
+         Return "#" & System.Drawing.Color.FromArgb(RgbColor.R, RgbColor.G, RgbColor.B).ToArgb().ToString("X6")
+      End Get
+      Set(value As String)
+         m_Hexadecimal = value
+         If m_Hexadecimal.Length >= 8 AndAlso m_Hexadecimal >= "#FF000000" And m_Hexadecimal <= "#FFFFFFFF" Then
+            Dim Color As Color = CType(ColorConverter.ConvertFromString(m_Hexadecimal), Color)
+            SetCurrColorFill(Color)
+         End If
+         NotifyPropertyChanged(NameOf(Fill))
+         NotifyPropertyChanged(NameOf(Hexadecimal))
+      End Set
+   End Property
+
+   Friend Sub SetHexadecimal(value As String)
+      m_Hexadecimal = value
+      NotifyPropertyChanged(NameOf(Hexadecimal))
+   End Sub
+
+   Private m_Red As Double
+   Public Property Red As String
+      Get
+         Dim RgbColor As Color = HSLColor.HslToRgb(m_HSLColor)
+         Return DoubleToString(RgbColor.R, 0)
+      End Get
+      Set(value As String)
+         If StringToDouble(value, m_Red) And (m_Red >= 0 AndAlso m_Red <= 255) Then
+            UpdateRed(m_Red)
+            'm_Red = value
+            m_Fill = New SolidColorBrush(Color.FromRgb(m_Red, m_Green, m_Blue))
+            SetCurrColorFill(m_Fill.Color)
+            NotifyPropertyChanged(NameOf(Fill))
+            NotifyPropertyChanged(NameOf(Red))
+         Else
+            NotifyPropertyChanged(NameOf(Red))
+         End If
+      End Set
+   End Property
+   Friend Sub SetRed(value As Double)
+      m_Red = value
+      NotifyPropertyChanged(NameOf(Red))
+   End Sub
+
+   Private m_Green As Double
+   Public Property Green As String
+      Get
+         Dim RgbColor As Color = HSLColor.HslToRgb(m_HSLColor)
+         Return DoubleToString(RgbColor.G, 0)
+      End Get
+      Set(value As String)
+         If StringToDouble(value, m_Green) And (m_Green >= 0 AndAlso m_Green <= 255) Then
+            UpdateGreen(value)
+            m_Green = value
+            m_Fill = New SolidColorBrush(Color.FromRgb(m_Red, m_Green, m_Blue))
+            SetCurrColorFill(m_Fill.Color)
+            NotifyPropertyChanged(NameOf(Fill))
+         Else
+            NotifyPropertyChanged(NameOf(Green))
+         End If
+      End Set
+   End Property
+   Friend Sub SetGreen(value As Double)
+      m_Green = value
+      NotifyPropertyChanged(NameOf(Green))
+   End Sub
+
+   Private m_Blue As Double
+   Public Property Blue As String
+      Get
+         Dim RgbColor As Color = HSLColor.HslToRgb(m_HSLColor)
+         Return DoubleToString(RgbColor.B, 0)
+      End Get
+      Set(value As String)
+         If StringToDouble(value, m_Blue) And (m_Blue >= 0 AndAlso m_Blue <= 255) Then
+            UpdateBlue(value)
+            m_Blue = value
+            m_Fill = New SolidColorBrush(Color.FromRgb(m_Red, m_Green, m_Blue))
+            SetCurrColorFill(m_Fill.Color)
+            NotifyPropertyChanged(NameOf(Fill))
+         Else
+            NotifyPropertyChanged(NameOf(Blue))
+         End If
+      End Set
+   End Property
+   Friend Sub SetBlu(value As Double)
+      m_Blue = value
+      NotifyPropertyChanged(NameOf(Blue))
+   End Sub
+
+   Private m_Hue As String
+   Public Property Hue As String
+      Get
+         Return m_Hue
+      End Get
+      Set(value As String)
+         Dim dHue As Double = 0
+         If StringToDouble(value, dHue) AndAlso dHue >= 0 AndAlso dHue < 360 Then
+            UpdateHue(dHue)
+            m_Hue = If(value.Last() = "."c, value, DoubleToString(m_HSLColor.Hue, 2))
+            RaiseEvent m_UpdateCursorsPos()
+         Else
+            NotifyPropertyChanged(NameOf(Hue))
+         End If
+      End Set
+   End Property
+   Friend Sub UpdateHue()
+      m_Hue = DoubleToString(m_HSLColor.Hue, 0)
+      NotifyPropertyChanged(NameOf(Hue))
+   End Sub
+
+   Private m_Saturation As String
+   Public Property Saturation As String
+      Get
+         Return m_Saturation
+      End Get
+      Set(value As String)
+         Dim dSaturation As Double = 0
+         If StringToDouble(value, dSaturation) AndAlso dSaturation >= 0 AndAlso dSaturation <= 100 Then
+            UpdateSaturation(dSaturation / 100)
+            m_Saturation = If(value.Last() = "."c, value, DoubleToString(m_HSLColor.Saturation * 100, 2))
+            RaiseEvent m_UpdateCursorsPos()
+         Else
+            NotifyPropertyChanged(NameOf(Saturation))
+         End If
+      End Set
+   End Property
+   Friend Sub UpdateSaturation()
+      m_Saturation = DoubleToString(m_HSLColor.Saturation * 100, 2)
+      NotifyPropertyChanged(NameOf(Saturation))
+   End Sub
+
+   Private m_Lightness As String
+   Public Property Lightness As String
+      Get
+         Return m_Lightness
+      End Get
+      Set(value As String)
+         Dim dLightness As Double = 0
+         If StringToDouble(value, dLightness) AndAlso dLightness >= 0 AndAlso dLightness <= 100 Then
+            UpdateLightness(dLightness / 100)
+            m_Lightness = If(value.Last() = "."c, value, DoubleToString(m_HSLColor.Lightness * 100, 2))
+            RaiseEvent m_UpdateCursorsPos()
+         Else
+            NotifyPropertyChanged(NameOf(Lightness))
+         End If
+      End Set
+   End Property
+   Friend Sub UpdateLightness()
+      m_Lightness = DoubleToString(m_HSLColor.Lightness * 100, 2)
+      NotifyPropertyChanged(NameOf(Lightness))
+   End Sub
+
+   ' Definizione comandi
+   Private m_cmdCancel As ICommand
+   Private m_cmdOk As ICommand
+   Private m_cmdSaveColor As ICommand
+
+#Region "Messages"
+   Public ReadOnly Property Red_Msg As String
+      Get
+         Return EgtMsg(15050)
+      End Get
+   End Property
+
+   Public ReadOnly Property Green_Msg As String
+      Get
+         Return EgtMsg(15051)
+      End Get
+   End Property
+
+   Public ReadOnly Property Blu_Msg As String
+      Get
+         Return EgtMsg(15052)
+      End Get
+   End Property
+
+   Public ReadOnly Property Hexadecimal_Msg As String
+      Get
+         Return EgtMsg(15053)
+      End Get
+   End Property
+   Public ReadOnly Property AddCColor_Msg As String
+      Get
+         Return EgtMsg(15054)
+      End Get
+   End Property
+
+   Public ReadOnly Property BasicColor_Msg As String
+      Get
+         Return EgtMsg(15055)
+      End Get
+   End Property
+   Public ReadOnly Property CustomColor_Msg As String
+      Get
+         Return EgtMsg(15056)
+      End Get
+   End Property
+#End Region
+
+#End Region    ' FIELDS & PROPERTIES
+
+#Region "CONTRUCTORS"
+
+   Sub New()
+      EgtColorPicker.SetOwner(Me)
+
+      'Colori di Base
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.LightCoral)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Khaki)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.LightGreen)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.PaleGreen)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Aqua)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.SteelBlue)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Pink)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.HotPink)))
+
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Red)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Yellow)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Lime)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.LimeGreen)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Cyan)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.CornflowerBlue)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.MediumPurple)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Magenta)))
+
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Brown)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Orange)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Green)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.MediumSeaGreen)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.MediumBlue)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.MediumSlateBlue)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.MediumVioletRed)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.DeepPink)))
+
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.DarkRed)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.DarkOrange)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.OliveDrab)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.DarkOliveGreen)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Blue)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Navy)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.DarkMagenta)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.BlueViolet)))
+
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Maroon)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Firebrick)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.ForestGreen)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.DarkGreen)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.DarkBlue)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.MidnightBlue)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.DarkSlateBlue)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Indigo)))
+
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Black)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.DarkKhaki)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Olive)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.DarkGray)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.MediumAquamarine)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.Gray)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.DarkViolet)))
+      m_BasicColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+
+      'Colori Personalizzati 
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+      m_CustomColors.Add(New EgtColorPicker(New SolidColorBrush(Colors.White)))
+
+      NotifyPropertyChanged(NameOf(BasicColors))
+      NotifyPropertyChanged(NameOf(CustomColors))
+
+      SelCustomColor = m_CustomColors(0)
+      NotifyPropertyChanged(NameOf(SelCustomColor))
+   End Sub
+
+#End Region    'CONTRUCTORS"
+   Friend Sub UpdateHue(value As Double)
+      m_HSLColor.SetHue(value)
+      NotifyPropertyChanged(NameOf(CurrColor))
+      SetLightnessColor()
+      UpdateSaturation()
+      UpdateLightness()
+      NotifyPropertyChanged(NameOf(Red))
+      NotifyPropertyChanged(NameOf(Green))
+      NotifyPropertyChanged(NameOf(Blue))
+      NotifyPropertyChanged(NameOf(Hexadecimal))
+   End Sub
+   Friend Sub UpdateSaturation(value As Double)
+      m_HSLColor.SetSaturation(value)
+      NotifyPropertyChanged(NameOf(CurrColor))
+      SetLightnessColor()
+      UpdateHue()
+      UpdateLightness()
+      NotifyPropertyChanged(NameOf(Red))
+      NotifyPropertyChanged(NameOf(Green))
+      NotifyPropertyChanged(NameOf(Blue))
+      NotifyPropertyChanged(NameOf(Hexadecimal))
+   End Sub
+   Friend Sub UpdateLightness(value As Double)
+      m_HSLColor.SetLightness(value)
+      NotifyPropertyChanged(NameOf(CurrColor))
+      SetLightnessColor()
+      UpdateHue()
+      UpdateSaturation()
+      NotifyPropertyChanged(NameOf(Red))
+      NotifyPropertyChanged(NameOf(Green))
+      NotifyPropertyChanged(NameOf(Blue))
+      NotifyPropertyChanged(NameOf(Hexadecimal))
+   End Sub
+   Friend Sub UpdateRed(value As Double)
+      Dim RGBColor As Color = HSLColor.HslToRgb(m_HSLColor)
+      Dim h, s, l As Double
+      HSLColor.RgbToHsl(Color.FromRgb(value, RGBColor.G, RGBColor.B), h, s, l)
+      SetRed(value)
+      m_HSLColor.SetHue(h)
+      m_HSLColor.SetSaturation(s)
+      m_HSLColor.SetLightness(l)
+      NotifyPropertyChanged(NameOf(CurrColor))
+      SetLightnessColor()
+      UpdateHue()
+      UpdateSaturation()
+      UpdateLightness()
+      NotifyPropertyChanged(NameOf(Red))
+      NotifyPropertyChanged(NameOf(Green))
+      NotifyPropertyChanged(NameOf(Blue))
+      NotifyPropertyChanged(NameOf(Hexadecimal))
+   End Sub
+   Friend Sub UpdateGreen(value As Double)
+      Dim RGBColor As Color = HSLColor.HslToRgb(m_HSLColor)
+      Dim h, s, l As Double
+      HSLColor.RgbToHsl(Color.FromRgb(RGBColor.R, value, RGBColor.B), h, s, l)
+      m_HSLColor.SetHue(h)
+      m_HSLColor.SetSaturation(s)
+      m_HSLColor.SetLightness(l)
+      NotifyPropertyChanged(NameOf(CurrColor))
+      SetLightnessColor()
+      UpdateHue()
+      UpdateSaturation()
+      UpdateLightness()
+      NotifyPropertyChanged(NameOf(Red))
+      NotifyPropertyChanged(NameOf(Green))
+      NotifyPropertyChanged(NameOf(Blue))
+      NotifyPropertyChanged(NameOf(Hexadecimal))
+   End Sub
+
+   Friend Sub UpdateBlue(value As Double)
+      Dim RGBColor As Color = HSLColor.HslToRgb(m_HSLColor)
+      Dim h, s, l As Double
+      HSLColor.RgbToHsl(Color.FromRgb(RGBColor.R, RGBColor.G, value), h, s, l)
+      m_HSLColor.SetHue(h)
+      m_HSLColor.SetSaturation(s)
+      m_HSLColor.SetLightness(l)
+      NotifyPropertyChanged(NameOf(CurrColor))
+      SetLightnessColor()
+      UpdateHue()
+      UpdateSaturation()
+      UpdateLightness()
+      NotifyPropertyChanged(NameOf(Red))
+      NotifyPropertyChanged(NameOf(Green))
+      NotifyPropertyChanged(NameOf(Blue))
+      NotifyPropertyChanged(NameOf(Hexadecimal))
+   End Sub
+
+
+   Friend Sub SetLightnessColor()
+      RaiseEvent m_SetLuminosityFill(HSLColor.HslToRgb(m_HSLColor.Hue, m_HSLColor.Saturation, 0.5))
+   End Sub
+
+#Region "COMMANDS"
+
+   Public ReadOnly Property Ok_Command As ICommand
+      Get
+         If m_cmdOk Is Nothing Then
+            m_cmdOk = New Command(AddressOf ok)
+         End If
+         Return m_cmdOk
+      End Get
+   End Property
+
+   Public Sub ok()
+      RaiseEvent m_CloseWindow(DialogResult.OK)
+   End Sub
+
+   Public ReadOnly Property Cancel_Command As ICommand
+      Get
+         If m_cmdCancel Is Nothing Then
+            m_cmdCancel = New Command(AddressOf Cancel)
+         End If
+         Return m_cmdCancel
+      End Get
+   End Property
+
+   Public Sub Cancel()
+      RaiseEvent m_CloseWindow(DialogResult.Cancel)
+   End Sub
+
+   Public ReadOnly Property SaveColor_Command As ICommand
+      Get
+         If m_cmdSaveColor Is Nothing Then
+            m_cmdSaveColor = New Command(AddressOf SaveColor)
+         End If
+         Return m_cmdSaveColor
+      End Get
+   End Property
+
+   Public Sub SaveColor()
+      If Not IsNothing(m_CustomColor) Then
+         m_CustomColor.SetFill(CurrColor)
+         Dim nIndex As Integer = m_CustomColors.IndexOf(SelCustomColor)
+         m_CustomColor = If(nIndex >= 0 AndAlso nIndex < m_CustomColors.Count - 1, m_CustomColors(nIndex + 1), m_CustomColors(0))
+         NotifyPropertyChanged(NameOf(SelCustomColor))
+      End If
+   End Sub
+
+#End Region    'COMMANDS
+
+End Class
+
+Public Class EgtColorPicker
+   Inherits VMBase
+
+#Region "FIELDS & PROPERTIES"
+
+   Private Shared Owner As EgtColorPickerVM
+
+   Private m_Fill As SolidColorBrush
+   Public ReadOnly Property Fill As SolidColorBrush
+      Get
+         Return m_Fill
+      End Get
+   End Property
+
+   Friend Sub SetFill(value As SolidColorBrush)
+      m_Fill = value
+      NotifyPropertyChanged(NameOf(Fill))
+   End Sub
+
+   Private m_Luminosity_Fill As SolidColorBrush
+   Public ReadOnly Property Luminosity_Fill As SolidColorBrush
+      Get
+         Return m_Luminosity_Fill
+      End Get
+   End Property
+
+   Friend Sub SetLumFill(value As SolidColorBrush)
+      m_Luminosity_Fill = value
+      NotifyPropertyChanged(NameOf(Luminosity_Fill))
+   End Sub
+
+   Private m_CurrColorFill As SolidColorBrush
+   Public ReadOnly Property CurrColor_Fill As SolidColorBrush
+      Get
+         Return m_CurrColorFill
+      End Get
+   End Property
+
+   Friend Sub SetCurrFill(value As SolidColorBrush)
+      m_CurrColorFill = value
+      NotifyPropertyChanged(NameOf(CurrColor_Fill))
+   End Sub
+
+#End Region    ' FIELDS & PROPERTIES
+
+#Region "CONTRUCTORS"
+
+   Sub New(Fill As SolidColorBrush)
+      m_Fill = Fill
+   End Sub
+
+#End Region    'CONTRUCTORS"
+
+#Region "METHODS"
+
+   Friend Shared Sub SetOwner(value As EgtColorPickerVM)
+      Owner = value
+   End Sub
+
+#End Region    ' METHODS
+
+End Class
+
+Public Class HSLColor
+
+   Private m_Hue As Double
+   Public ReadOnly Property Hue As Double
+      Get
+         Return m_Hue
+      End Get
+   End Property
+   Friend Sub SetHue(value As Double)
+      m_Hue = value
+   End Sub
+
+   Private m_Saturation As Double
+   Public ReadOnly Property Saturation As Double
+      Get
+         Return m_Saturation
+      End Get
+   End Property
+   Friend Sub SetSaturation(value As Double)
+      m_Saturation = value
+   End Sub
+
+   Private m_Lightness As Double
+   Public ReadOnly Property Lightness As Double
+      Get
+         Return m_Lightness
+      End Get
+   End Property
+   Friend Sub SetLightness(value As Double)
+      m_Lightness = value
+   End Sub
+
+   Sub New()
+   End Sub
+
+   Sub New(Hue As Double, Saturation As Double, Lightness As Double)
+      m_Hue = Hue
+      m_Saturation = Saturation
+      m_Lightness = Lightness
+   End Sub
+
+   'Private Shared Function HslToRgb(ByVal h As Double, ByVal s As Double, ByVal l As Double, ByRef r As Integer, ByRef g As Integer, ByRef b As Integer) As Boolean
+   '   Dim dConversionH As Double = Math.Round(h, MidpointRounding.AwayFromZero)
+   '   Dim dConversionS As Double = Math.Round(s, 2)
+   '   Dim dConversionL As Double = Math.Round(l, 2)
+   '   Dim C As Double = (1 - Math.Abs(2 * dConversionL - 1)) * dConversionS
+   '   Dim X = C * (1 - Math.Abs((dConversionH / 60) Mod 2 - 1))
+   '   Dim m = dConversionL - C / 2
+   '   Dim dRPrimo As Double
+   '   Dim dGPrimo As Double
+   '   Dim dBPrimo As Double
+
+   '   If dConversionH >= 0 Then
+   '      If dConversionH < 60 Then
+   '         dRPrimo = C
+   '         dGPrimo = X
+   '         dBPrimo = 0
+   '      ElseIf dConversionH < 120 Then
+   '         dRPrimo = X
+   '         dGPrimo = C
+   '         dBPrimo = 0
+   '      ElseIf dConversionH < 180 Then
+   '         dRPrimo = 0
+   '         dGPrimo = C
+   '         dBPrimo = X
+   '      ElseIf dConversionH < 240 Then
+   '         dRPrimo = 0
+   '         dGPrimo = X
+   '         dBPrimo = C
+   '      ElseIf dConversionH < 300 Then
+   '         dRPrimo = X
+   '         dGPrimo = 0
+   '         dBPrimo = C
+   '      ElseIf dConversionH < 360 Then
+   '         dRPrimo = C
+   '         dGPrimo = 0
+   '         dBPrimo = X
+   '      End If
+   '   End If
+
+   '   r = (dRPrimo + m) * 255
+   '   g = (dGPrimo + m) * 255
+   '   b = (dBPrimo + m) * 255
+   'End Function
+
+   Friend Shared Function HslToRgb(ByVal h As Double, ByVal s As Double, ByVal l As Double) As Color
+      Dim dConversionH As Double = Math.Round(h, MidpointRounding.AwayFromZero)
+      Dim dConversionS As Double = Math.Round(s, 2)
+      Dim dConversionL As Double = Math.Round(l, 2)
+      Dim C As Double = (1 - Math.Abs(2 * dConversionL - 1)) * dConversionS
+      Dim X = C * (1 - Math.Abs((dConversionH / 60) Mod 2 - 1))
+      Dim m = dConversionL - C / 2
+      Dim dRPrimo As Double
+      Dim dGPrimo As Double
+      Dim dBPrimo As Double
+
+      If dConversionH >= 0 Then
+         If dConversionH < 60 Then
+            dRPrimo = C
+            dGPrimo = X
+            dBPrimo = 0
+         ElseIf dConversionH < 120 Then
+            dRPrimo = X
+            dGPrimo = C
+            dBPrimo = 0
+         ElseIf dConversionH < 180 Then
+            dRPrimo = 0
+            dGPrimo = C
+            dBPrimo = X
+         ElseIf dConversionH < 240 Then
+            dRPrimo = 0
+            dGPrimo = X
+            dBPrimo = C
+         ElseIf dConversionH < 300 Then
+            dRPrimo = X
+            dGPrimo = 0
+            dBPrimo = C
+         ElseIf dConversionH < 360 Then
+            dRPrimo = C
+            dGPrimo = 0
+            dBPrimo = X
+         End If
+      End If
+
+      Dim r As Double = Math.Floor((dRPrimo + m) * 255)
+      Dim g As Double = Math.Floor((dGPrimo + m) * 255)
+      Dim b As Double = Math.Floor((dBPrimo + m) * 255)
+      Return Color.FromArgb(255, r, g, b)
+   End Function
+
+   Friend Shared Function HslToRgb(HSLColor As HSLColor) As Color
+      Return HslToRgb(HSLColor.Hue, HSLColor.Saturation, HSLColor.Lightness)
+   End Function
+
+   Friend Shared Function RgbToHsl(ByVal r As Integer, ByVal g As Integer, ByVal b As Integer, ByRef h As Double, ByRef s As Double, ByRef l As Double) As Boolean
+      Dim dRPrimo As Double = r / 255
+      Dim dGPrimo As Double = g / 255
+      Dim dBPrimo As Double = b / 255
+      Dim CMax As Double = Math.Max(dRPrimo, Math.Max(dGPrimo, dBPrimo))
+      Dim CMin As Double = Math.Min(dRPrimo, Math.Min(dGPrimo, dBPrimo))
+      Dim Delta As Double = CMax - CMin
+      If Delta = 0 Then
+         h = 0
+      ElseIf CMax = dRPrimo Then
+         Dim hMod = (((dGPrimo - dBPrimo) / Delta) Mod 6)
+         If hMod < 0 Then
+            h = 60 * (hMod + 6)
+         Else
+            h = 60 * hMod
+         End If
+      ElseIf CMax = dGPrimo Then
+         h = 60 * ((dBPrimo - dRPrimo) / Delta + 2)
+      ElseIf CMax = dBPrimo Then
+         h = 60 * ((dRPrimo - dGPrimo) / Delta + 4)
+      End If
+
+      l = (CMax + CMin) / 2
+
+      If Delta = 0 Then
+         s = 0
+      Else
+         s = Delta / (1 - Math.Abs(2 * l - 1))
+      End If
+      h = Math.Round(h, 1)
+      s = Math.Round(s, 1)
+      l = Math.Round(l, 1)
+      Return True
+   End Function
+
+   Friend Shared Function RgbToHsl(RgbColor As Color, ByRef h As Double, ByRef s As Double, ByRef l As Double) As Boolean
+      Return RgbToHsl(RgbColor.R, RgbColor.G, RgbColor.B, h, s, l)
+   End Function
+
+   Friend Shared Function RgbToHsl(RgbColor As System.Drawing.Color, ByRef h As Double, ByRef s As Double, ByRef l As Double) As Boolean
+      Return RgbToHsl(RgbColor.R, RgbColor.G, RgbColor.B, h, s, l)
+   End Function
+   Friend Shared Function RgbToHsl(RgbColor As System.Drawing.Color) As HSLColor
+      Dim h, s, l As Double
+      RgbToHsl(RgbColor.R, RgbColor.G, RgbColor.B, h, s, l)
+      Dim NewHSLColor As New HSLColor(h, s, l)
+      Return NewHSLColor
+   End Function
+
+End Class

Icarus/EgtManageFileDialog/EgtManageFileDialogV.xaml

@@ -0,0 +1,426 @@
+<EgtWPFLib5:EgtMainWindow  x:Class="EgtManageFileDialogV"
+                           xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+                           xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+                           xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+                           xmlns:local="clr-namespace:Icarus"                   
+                           Title="{Binding sTitle}"
+                           Height="500"
+                           Width="800"
+                           WindowStartupLocation="CenterOwner"
+                           Style="{StaticResource Dialog_Window}">
+   <Grid Margin="5,5,5,0">
+      <Grid.RowDefinitions>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="Auto"/>
+      </Grid.RowDefinitions>
+      <Grid Margin="5,5,5,0">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="Auto"/>
+         </Grid.ColumnDefinitions>
+         <Button Command="{Binding GoBack_Command}"
+                 HorizontalAlignment="Right"
+                 Margin="2.5,0,5,0"
+                 BorderBrush="Transparent"
+                 Style="{StaticResource RightPanel_Button}">
+            <Image Source="\Resources\EgtDialog\Restore.png"
+                   Style="{StaticResource Button_Image}"/>
+         </Button>
+         <TextBlock Grid.Column="1"
+                    Margin="5"
+                    Text="{Binding sSelPath}"
+                    HorizontalAlignment="Left"
+                    Style="{StaticResource DialogWindow_TextBlock}"/>
+         <ComboBox Grid.Column="2"
+                   HorizontalAlignment="Right"
+                   IsSynchronizedWithCurrentItem="True"
+                   ItemsSource="{Binding ViewModeList}"
+                   SelectedItem="{Binding SelViewMode}"
+                   Width="200"
+                   Height="30"
+                   Margin="2.5,5,2.5,5"
+                   Style="{StaticResource RightPanel_ComboBox}"/>
+      </Grid>
+      <Grid Grid.Row="1"
+            Margin="5,5,5,0">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="4*"/>
+         </Grid.ColumnDefinitions>
+         <TreeView x:Name="FileTree" 
+                   ItemsSource="{Binding RootList}"                   
+                   Margin="10"
+                   FontSize="15"
+                   BorderBrush="White"
+                   Foreground="{StaticResource Icarus_Gray}">
+            <TreeView.Resources>
+               <HierarchicalDataTemplate DataType="{x:Type local:EgtFolder}" 
+                                         ItemsSource="{Binding TreeItemList_View}">
+                  <StackPanel Orientation="Horizontal">
+                     <Image Source="{Binding sIconSource}"
+                            Height="15"
+                            Style="{StaticResource Button_Image}"/>
+                     <TextBlock Text="{Binding sName}"
+                                Style="{StaticResource DialogWindow_TextBlock}"/>
+                  </StackPanel>
+               </HierarchicalDataTemplate>
+               <DataTemplate DataType="{x:Type local:EgtItem}">
+                  <StackPanel Orientation="Horizontal">
+                     <Image Source="{Binding sIconSource}"
+                            Height="15"
+                            Style="{StaticResource Button_Image}"/>
+                     <TextBlock Text="{Binding sName}"
+                                Style="{StaticResource DialogWindow_TextBlock}"/>
+                  </StackPanel>
+               </DataTemplate>
+            </TreeView.Resources>
+            <TreeView.ItemContainerStyle>
+               <Style TargetType="{x:Type TreeViewItem}">
+                  <Setter Property="IsSelected" Value="{Binding IsSelected, Mode=TwoWay}"/>
+                  <Setter Property="IsExpanded" Value="{Binding IsExpanded, Mode=TwoWay}"/>
+               </Style>
+            </TreeView.ItemContainerStyle>
+         </TreeView>
+         <TabControl Grid.Column="1"
+                     Background="Transparent"
+                     BorderBrush="White"
+                     BorderThickness="0"
+                     SelectedIndex="{Binding nSelTab}">
+            <TabControl.ItemContainerStyle>
+               <Style TargetType="{x:Type TabItem}">
+                  <Setter Property="Visibility" Value="Collapsed"/>
+               </Style>
+            </TabControl.ItemContainerStyle>
+            <TabItem Header="LISTBOX">
+               <ListBox x:Name="FileList" 
+                        Grid.Row="1"
+                        Margin="5,5,5,5"
+                        BorderBrush="White"
+                        IsSynchronizedWithCurrentItem="True"
+                        ItemsSource="{Binding SelTreeItem.FolderList, Mode=TwoWay}"
+                        SelectedItem="{Binding ItemSelected, Mode=TwoWay}">
+                  <ListBox.Resources>
+                     <DataTemplate x:Key="ListTemplateView" 
+                                   DataType="{x:Type local:EgtDirectory}">
+                        <Grid Margin="5,5,5,0"
+                              Height="20">
+                           <Grid.ColumnDefinitions>
+                              <ColumnDefinition Width="Auto"/>
+                              <ColumnDefinition Width="Auto"/>
+                           </Grid.ColumnDefinitions>
+                           <Image Source="{Binding sIconSource}"
+                                  Height="15"
+                                  Style="{StaticResource Button_Image}"/>
+                           <TextBlock Grid.Column="1"
+                                      Text="{Binding sName}"
+                                      Style="{StaticResource DialogWindow_TextBlock}"/>
+                        </Grid>
+                     </DataTemplate>
+                     <DataTemplate x:Key="TilesTemplateView"
+                                   DataType="{x:Type local:EgtDirectory}">
+                        <Grid Margin="5,5,5,0"
+                              Height="50"
+                              Width="250">
+                           <Grid.ColumnDefinitions>
+                              <ColumnDefinition Width="Auto"/>
+                              <ColumnDefinition Width="1*"/>
+                           </Grid.ColumnDefinitions>
+                           <Image Source="{Binding sIconSource}"
+                                  Style="{StaticResource Button_Image}"/>
+                           <UniformGrid Grid.Column="1"
+                                        Rows="3"
+                                        Margin="2.5,0,2.5,5">
+                              <TextBlock TextAlignment="Left"
+                                         Text="{Binding sName}"
+                                         HorizontalAlignment="Left"
+                                         Style="{StaticResource DialogWindow_TextBlock}"/>
+                              <TextBlock TextAlignment="Left"
+                                         Text="{Binding ghTypeItem}"
+                                         HorizontalAlignment="Left"
+                                         Style="{StaticResource DialogWindow_TextBlock}"/>
+                              <TextBlock TextAlignment="Left"
+                                         Text="{Binding sDimension}"
+                                         HorizontalAlignment="Left"
+                                         Style="{StaticResource DialogWindow_TextBlock}"/>
+                           </UniformGrid>
+                        </Grid>
+                     </DataTemplate>
+                     <DataTemplate x:Key="ContentTemplateView"
+                                      DataType="{x:Type local:EgtDirectory}">
+                        <Grid Margin="5,5,5,0"
+                              Height="50">
+                           <Grid.RowDefinitions>
+                              <RowDefinition Height="1*"/>
+                              <RowDefinition Height="Auto"/>
+                           </Grid.RowDefinitions>
+                           <Grid>
+                              <Grid.ColumnDefinitions>
+                                 <ColumnDefinition Width="Auto"/>
+                                 <ColumnDefinition Width="1*"/>
+                                 <ColumnDefinition Width="1*"/>
+                              </Grid.ColumnDefinitions>
+                              <Image Source="{Binding sIconSource}"
+                                        Style="{StaticResource Button_Image}"/>
+                              <UniformGrid Grid.Column="1"
+                                              Rows="2"
+                                              Margin="2.5,0,2.5,5">
+                                 <TextBlock TextAlignment="Left"
+                                               HorizontalAlignment="Left"
+                                               Text="{Binding sName}"
+                                               Style="{StaticResource DialogWindow_TextBlock}"/>
+                                 <TextBlock TextAlignment="Left"
+                                               HorizontalAlignment="Left"
+                                               Text="{Binding ghTypeItem}"
+                                               Style="{StaticResource DialogWindow_TextBlock}"/>
+                              </UniformGrid>
+                              <UniformGrid Grid.Column="2"
+                                              Rows="2"
+                                              Margin="2.5,0,2.5,5">
+                                 <TextBlock TextAlignment="Left"
+                                               HorizontalAlignment="Left"
+                                               Text="{Binding sLastModifyDate}"
+                                               Style="{StaticResource DialogWindow_TextBlock}"/>
+                                 <TextBlock TextAlignment="Left"
+                                               HorizontalAlignment="Left"
+                                               Text="{Binding sDimension}"
+                                               Style="{StaticResource DialogWindow_TextBlock}"/>
+                              </UniformGrid>
+                           </Grid>
+                           <Border Grid.Row="1"
+                                   BorderThickness="1"
+                                   BorderBrush="LightGray"/>
+                        </Grid>
+                     </DataTemplate>
+                  </ListBox.Resources>
+                  <ListBox.ItemTemplate>
+                     <DataTemplate DataType="{x:Type local:EgtDirectory}">
+                        <ContentControl Content="{Binding}">
+                           <ContentControl.Style>
+                              <Style TargetType="{x:Type ContentControl}">
+                                 <Style.Triggers>
+                                    <DataTrigger  Binding="{Binding DataContext.nSelTempleteListView, RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtMainWindow}}}" Value="0">
+                                       <Setter Property="ContentTemplate" Value="{StaticResource ListTemplateView}" />
+                                    </DataTrigger>
+                                    <DataTrigger  Binding="{Binding DataContext.nSelTempleteListView, RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtMainWindow}}}" Value="1">
+                                       <Setter Property="ContentTemplate" Value="{StaticResource TilesTemplateView}" />
+                                    </DataTrigger>
+                                    <DataTrigger  Binding="{Binding DataContext.nSelTempleteListView, RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtMainWindow}}}" Value="2">
+                                       <Setter Property="ContentTemplate" Value="{StaticResource ContentTemplateView}" />
+                                    </DataTrigger>
+                                 </Style.Triggers>
+                              </Style>
+                           </ContentControl.Style>
+                        </ContentControl>
+                     </DataTemplate>
+                  </ListBox.ItemTemplate>
+                  <ListBox.ItemContainerStyle>
+                     <Style TargetType="{x:Type ListBoxItem}" BasedOn="{StaticResource {x:Type ListBoxItem}}">
+                        <Setter Property="HorizontalContentAlignment" Value="Stretch"/>
+                        <EventSetter Event="MouseDoubleClick" Handler="ListBoxItem_MouseDoubleClick"/>
+                     </Style>
+                  </ListBox.ItemContainerStyle>
+                  <ListBox.Style>
+                     <Style TargetType="{x:Type ListBox}">
+                        <Style.Triggers>
+                           <DataTrigger Binding="{Binding DataContext.nSelTempleteListView, RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtMainWindow}}}"
+                                        Value="0">
+                              <Setter Property="ScrollViewer.HorizontalScrollBarVisibility" Value="Auto"/>
+                              <Setter Property="ScrollViewer.VerticalScrollBarVisibility" Value="Disabled"/>
+                              <Setter Property="ItemsPanel">
+                                 <Setter.Value>
+                                    <ItemsPanelTemplate>
+                                       <WrapPanel Orientation="Vertical"/>
+                                    </ItemsPanelTemplate>
+                                 </Setter.Value>
+                              </Setter>
+                           </DataTrigger>
+                           <DataTrigger Binding="{Binding DataContext.nSelTempleteListView, RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtMainWindow}}}"
+                                        Value="1">
+                              <Setter Property="ScrollViewer.HorizontalScrollBarVisibility" Value="Disabled"/>
+                              <Setter Property="ScrollViewer.VerticalScrollBarVisibility" Value="Auto"/>
+                              <Setter Property="ItemsPanel">
+                                 <Setter.Value>
+                                    <ItemsPanelTemplate>
+                                       <WrapPanel Orientation="Horizontal"/>
+                                    </ItemsPanelTemplate>
+                                 </Setter.Value>
+                              </Setter>
+                           </DataTrigger>
+                           <DataTrigger Binding="{Binding DataContext.nSelTempleteListView, RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtMainWindow}}}"
+                                        Value="2">
+                              <Setter Property="ScrollViewer.HorizontalScrollBarVisibility" Value="Disabled"/>
+                              <Setter Property="ScrollViewer.VerticalScrollBarVisibility" Value="Auto"/>
+                              <Setter Property="ItemsPanel">
+                                 <Setter.Value>
+                                    <ItemsPanelTemplate>
+                                       <StackPanel Orientation="Vertical"
+                                                   HorizontalAlignment="Stretch"/>
+                                    </ItemsPanelTemplate>
+                                 </Setter.Value>
+                              </Setter>
+                           </DataTrigger>
+                        </Style.Triggers>
+                     </Style>
+                  </ListBox.Style>
+               </ListBox>
+            </TabItem>
+            <TabItem Header="DATAGRID">
+               <DataGrid AutoGenerateColumns="False"
+                         IsReadOnly="True"
+                         Margin="5,5,5,10"
+                         ItemsSource="{Binding SelTreeItem.FolderList, Mode=TwoWay}"
+                         SelectedItem="{Binding ItemSelected}"
+                         ColumnHeaderStyle="{StaticResource EgtManageFile_DataGridColumnHeader}">
+                  <DataGrid.Columns>
+                     <!--<DataGridTemplateColumn Width="SizeToCells">
+                        <DataGridTemplateColumn.CellTemplate>
+                           <DataTemplate>
+                              <Image Source="{Binding sIconSource}"
+                                     Height="15"
+                                     Style="{StaticResource Button_Image}"/>
+                           </DataTemplate>
+                        </DataGridTemplateColumn.CellTemplate>
+                     </DataGridTemplateColumn>-->
+                     <DataGridTemplateColumn Width="5*">
+                        <DataGridTemplateColumn.HeaderTemplate>
+                           <DataTemplate>
+                              <TextBlock Text="{Binding DataContext.Name_Msg, RelativeSource={RelativeSource AncestorType=DataGrid}}"
+                                         HorizontalAlignment="Left"/>
+                           </DataTemplate>
+                        </DataGridTemplateColumn.HeaderTemplate>
+                        <DataGridTemplateColumn.CellTemplate>
+                           <DataTemplate>
+                              <Grid>
+                                 <Grid.ColumnDefinitions>
+                                    <ColumnDefinition Width="Auto"/>
+                                    <ColumnDefinition Width="1*"/>
+                                 </Grid.ColumnDefinitions>
+                                 <Image Source="{Binding sIconSource}"
+                                        Margin="2.5,0,2.5,0"
+                                        Style="{StaticResource Button_Image}"/>
+                                 <TextBlock Grid.Column="1"
+                                            Text="{Binding sName}"
+                                            VerticalAlignment="Center"
+                                            Margin="2.5,0,0,0"/>
+                              </Grid>
+                           </DataTemplate>
+                        </DataGridTemplateColumn.CellTemplate>
+                        <!--<DataGridTemplateColumn.ElementStyle>
+                           <Style TargetType="TextBlock">
+                              <Setter Property="HorizontalAlignment" Value="Left"/>
+                              <Setter Property="VerticalAlignment" Value="Center"/>
+                              <Setter Property="TextAlignment" Value="Left"/>
+                              <Setter Property="Padding" Value="12,6,12,6"/>
+                           </Style>
+                        </DataGridTemplateColumn.ElementStyle>-->
+                     </DataGridTemplateColumn>
+                     <DataGridTextColumn Binding="{Binding sLastModifyDate}"
+                                         Width="2*">
+                        <DataGridTextColumn.HeaderTemplate>
+                           <DataTemplate>
+                              <TextBlock Text="{Binding DataContext.LastModify_Msg, RelativeSource={RelativeSource AncestorType=DataGrid}}"
+                                         HorizontalAlignment="Left"/>
+                           </DataTemplate>
+                        </DataGridTextColumn.HeaderTemplate>
+                        <DataGridTextColumn.ElementStyle>
+                           <Style TargetType="TextBlock">
+                              <Setter Property="HorizontalAlignment" Value="Left"/>
+                              <Setter Property="VerticalAlignment" Value="Center"/>
+                              <Setter Property="TextAlignment" Value="Left"/>
+                              <Setter Property="Padding" Value="12,6,12,6"/>
+                           </Style>
+                        </DataGridTextColumn.ElementStyle>
+                     </DataGridTextColumn>
+                     <DataGridTextColumn Binding="{Binding ghTypeItem}"
+                                         Width="1*">
+                        <DataGridTextColumn.HeaderTemplate>
+                           <DataTemplate>
+                              <TextBlock Text="{Binding DataContext.Type_Msg, RelativeSource={RelativeSource AncestorType=DataGrid}}"
+                                         HorizontalAlignment="Left"/>
+                           </DataTemplate>
+                        </DataGridTextColumn.HeaderTemplate>
+                        <DataGridTextColumn.ElementStyle>
+                           <Style TargetType="TextBlock">
+                              <Setter Property="HorizontalAlignment" Value="Left"/>
+                              <Setter Property="VerticalAlignment" Value="Center"/>
+                              <Setter Property="TextAlignment" Value="Left"/>
+                              <Setter Property="Padding" Value="12,6,12,6"/>
+                           </Style>
+                        </DataGridTextColumn.ElementStyle>
+                     </DataGridTextColumn>
+                     <DataGridTextColumn Binding="{Binding sDimension}"
+                                         Width="1*">
+                        <DataGridTextColumn.HeaderTemplate>
+                           <DataTemplate>
+                              <TextBlock Text="{Binding DataContext.Dimension_Msg, RelativeSource={RelativeSource AncestorType=DataGrid}}"
+                                         HorizontalAlignment="Left"/>
+                           </DataTemplate>
+                        </DataGridTextColumn.HeaderTemplate>
+                        <DataGridTextColumn.ElementStyle>
+                           <Style TargetType="TextBlock">
+                              <Setter Property="HorizontalAlignment" Value="Right"/>
+                              <Setter Property="VerticalAlignment" Value="Center"/>
+                              <Setter Property="TextAlignment" Value="Right"/>
+                              <Setter Property="Padding" Value="12,6,12,6"/>
+                           </Style>
+                        </DataGridTextColumn.ElementStyle>
+                     </DataGridTextColumn>
+                  </DataGrid.Columns>
+                  <DataGrid.RowStyle>
+                     <Style TargetType="DataGridRow" BasedOn="{StaticResource RowDataGrid_CustomHighLight}"/>
+                  </DataGrid.RowStyle>
+                  <DataGrid.InputBindings>
+                     <MouseBinding MouseAction="LeftDoubleClick" Command="{Binding DataContext.DoubleClick_Command, RelativeSource={RelativeSource AncestorType={x:Type EgtWPFLib5:EgtMainWindow}}}"/>
+                  </DataGrid.InputBindings>
+               </DataGrid>
+            </TabItem>
+         </TabControl>
+      </Grid>
+      <Grid Grid.Row="2" 
+            Margin="5,5,5,0">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="Auto"/>
+         </Grid.ColumnDefinitions>
+         <TextBlock Margin="5,5,5,5"
+                    Text="{Binding FileName_Msg}"
+                    HorizontalAlignment="Right"
+                    Style="{StaticResource DialogWindow_TextBlock}"/>
+         <TextBox Grid.Column="1"
+                  Margin="2.5,2.5,2.5,5"
+                  TextAlignment="Left"
+                  HorizontalAlignment="Stretch"
+                  Text="{Binding sSaveFileName}"
+                  Style="{StaticResource ParameterList_TextBox}"/>
+         <ComboBox Grid.Column="2"
+                   IsSynchronizedWithCurrentItem="True"
+                   ItemsSource="{Binding FilterList}"
+                   SelectedItem="{Binding SelFilter}"
+                   DisplayMemberPath="sNameExstension"
+                   HorizontalAlignment="Right"
+                   Width="200"
+                   Height="30"
+                   Margin="10,2.5,2.5,5"
+                   Style="{StaticResource RightPanel_ComboBox}"/>
+      </Grid>
+      <UniformGrid Grid.Row="3"  
+                   Rows="1"
+                   Margin="2.5,0,2.5,0">
+         <Button IsDefault="True"
+                 Content="OK"
+                 Command="{Binding Ok_Command}"
+                 HorizontalAlignment="Right"
+                 Margin="15,0,2.5,0"
+                 Style="{StaticResource RightPanel_HalfRound_Button}"/>
+         <Button Content="Cancel"
+                 Command="{Binding Cancel_Command}"
+                 HorizontalAlignment="Left"
+                 Margin="2.5,0,0,0"
+                 Style="{StaticResource RightPanel_HalfRound_Button}"/>
+      </UniformGrid>
+   </Grid>
+</EgtWPFLib5:EgtMainWindow>

Icarus/EgtManageFileDialog/EgtManageFileDialogV.xaml.vb

@@ -0,0 +1,104 @@
+Imports System.Windows.Forms
+
+Public Class EgtManageFileDialogV
+
+#Region "FIELDS & PROPERTIES"
+
+   Private WithEvents m_EgtManageFileDialogVM As EgtManageFileDialogVM
+
+   Private Shadows DialogResult As DialogResult
+
+   ''' <summary>
+   ''' Stringa che specifica il titolo da mostrare
+   ''' </summary>
+   Public Overloads Property Title As String
+      Get
+         Return m_EgtManageFileDialogVM.sTitle
+      End Get
+      Set(value As String)
+         m_EgtManageFileDialogVM.sTitle = value
+      End Set
+   End Property
+
+   Public Property Filter As String
+      Get
+         Return m_EgtManageFileDialogVM.sFilter
+      End Get
+      Set(value As String)
+         m_EgtManageFileDialogVM.sFilter = value
+      End Set
+   End Property
+
+   Public Property InitialDirectory As String
+      Get
+         Return m_EgtManageFileDialogVM.sInitialDirectory
+      End Get
+      Set(value As String)
+         m_EgtManageFileDialogVM.sInitialDirectory = value
+      End Set
+   End Property
+
+   Public Property FileName As String
+      Get
+         Return m_EgtManageFileDialogVM.sFileName
+      End Get
+      Set(value As String)
+         m_EgtManageFileDialogVM.sFileName = value
+      End Set
+   End Property
+
+   Public Property FilterIndex As Integer
+      Get
+         Return m_EgtManageFileDialogVM.nFilterIndex
+      End Get
+      Set(value As Integer)
+         m_EgtManageFileDialogVM.nFilterIndex = value
+      End Set
+   End Property
+
+   Public Property Mode As Integer
+      Get
+         Return m_EgtManageFileDialogVM.nMode
+      End Get
+      Set(value As Integer)
+         m_EgtManageFileDialogVM.nMode = value
+      End Set
+   End Property
+
+#End Region    ' FIELDS & PROPERTIES
+
+#Region "CONTRUCTORS"
+
+   Sub New(Owner As Window, EgtManageFileDialogVM As EgtManageFileDialogVM)
+      MyBase.New(Owner)
+      InitializeComponent()
+      Me.DataContext = EgtManageFileDialogVM
+      ' Assegno al riferimento locale al VM il VM preso dal DataContext
+      m_EgtManageFileDialogVM = EgtManageFileDialogVM
+   End Sub
+
+#End Region
+
+#Region "EVENTS"
+
+   Private Sub CloseWindow(DialogResult As MessageBoxResult) Handles m_EgtManageFileDialogVM.m_CloseWindow
+      Me.DialogResult = DialogResult
+      Me.Close()
+   End Sub
+
+#End Region
+
+#Region "METHODS"
+
+   Public Overloads Function ShowDialog() As DialogResult
+      MyBase.ShowDialog()
+      Return Me.DialogResult
+   End Function
+
+   Private Sub ListBoxItem_MouseDoubleClick(sender As Object, e As MouseButtonEventArgs)
+      m_EgtManageFileDialogVM.MouseDoubleClick()
+   End Sub
+
+#End Region    '  METHODS
+
+End Class

Icarus/EgtManageFileDialog/EgtManageFileDialogVM.vb

@@ -0,0 +1,882 @@
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports System.Windows.Forms
+Imports EgtWPFLib5
+Imports EgtUILib
+
+Public Class EgtManageFileDialogVM
+   Inherits VMBase
+
+#Region "FIELDS & PROPERTIES"
+
+   Public Enum VisualizationContainerType As Integer
+      LISTBOX = 0
+      DATAGRID = 1
+   End Enum
+
+   Public Enum VisualizationType As Integer
+      LISTTEMPLATE = 0
+      TILESTEMPLATE = 1
+      CONTENTTEMPLATE = 2
+      DETAILSTEMPLATE = 3
+   End Enum
+
+   Public Enum ModeTypes As Integer
+      FILE = 1
+      FOLDER = 2
+   End Enum
+
+   Private m_sTitle As String
+   Public Property sTitle As String
+      Get
+         Return m_sTitle
+      End Get
+      Set(value As String)
+         m_sTitle = value
+      End Set
+   End Property
+
+   'Scelta della modalità di salvataggio 1 = file 2 = folder 
+   Private m_nMode As Integer
+   Public Property nMode As Integer
+      Get
+         Return m_nMode
+      End Get
+      Set(value As Integer)
+         m_nMode = value
+      End Set
+   End Property
+
+   Private m_RootList As New ObservableCollection(Of EgtDirectory)
+   Public Property RootList As ObservableCollection(Of EgtDirectory)
+      Get
+         Return m_RootList
+      End Get
+      Set(value As ObservableCollection(Of EgtDirectory))
+         m_RootList = value
+      End Set
+   End Property
+
+   Public m_SelTreeItem As EgtDirectory
+   Public Property SelTreeItem As EgtDirectory
+      Get
+         Return m_SelTreeItem
+      End Get
+      Set(value As EgtDirectory)
+         m_SelTreeItem = value
+         NotifyPropertyChanged(NameOf(SelTreeItem))
+      End Set
+   End Property
+   Friend Sub UpdateSelTreeItem(Item As EgtDirectory)
+      m_SelTreeItem = Item
+      NotifyPropertyChanged(NameOf(SelTreeItem))
+   End Sub
+
+   Public m_ItemSelected As EgtDirectory
+   Public Property ItemSelected As EgtDirectory
+      Get
+         Return m_ItemSelected
+      End Get
+      Set(value As EgtDirectory)
+         m_ItemSelected = value
+         Dim Item As EgtItem = TryCast(m_ItemSelected, EgtItem)
+         If Not IsNothing(Item) Then
+            sSaveFileName = Item.sName
+         Else
+            Dim Folder As EgtFolder = TryCast(m_ItemSelected, EgtFolder)
+            If Not IsNothing(Folder) Then
+               sSaveFileName = Folder.sName
+            End If
+         End If
+      End Set
+   End Property
+   Friend Sub SetItemSelected(value As EgtDirectory)
+      m_ItemSelected = value
+      NotifyPropertyChanged(NameOf(ItemSelected))
+   End Sub
+
+   'Percorso del file o della cartella
+   Private m_sSelPath As String
+   Public Overloads Property sSelPath As String
+      Get
+         Return m_sSelPath
+      End Get
+      Set(value As String)
+         m_sSelPath = value
+         NotifyPropertyChanged(NameOf(sSelPath))
+      End Set
+   End Property
+
+   'Textbox per visualizzare il file o la folder selezionata
+   Private m_sSaveFileName As String
+   Public Property sSaveFileName As String
+      Get
+         Return m_sSaveFileName
+      End Get
+      Set(value As String)
+         m_sSaveFileName = value
+         NotifyPropertyChanged(NameOf(sSaveFileName))
+      End Set
+   End Property
+
+   'Lista filtri estensione
+   Private m_FilterList As ObservableCollection(Of EgtExstension)
+   Public Property FilterList As ObservableCollection(Of EgtExstension)
+      Get
+         Return m_FilterList
+      End Get
+      Set(value As ObservableCollection(Of EgtExstension))
+         m_FilterList = value
+      End Set
+   End Property
+
+   'Scelta filtro estensione per visualizzazione
+   Public m_SelFilter As EgtExstension
+   Public Property SelFilter As EgtExstension
+      Get
+         Return m_SelFilter
+      End Get
+      Set(value As EgtExstension)
+         m_SelFilter = value
+         Dim CurrItem As EgtFolder = TryCast(m_SelTreeItem, EgtFolder)
+         If Not IsNothing(CurrItem) Then
+            CollectionViewSource.GetDefaultView(CurrItem.FolderList).Refresh()
+         End If
+      End Set
+   End Property
+
+   ' Lista modalita' di visualizzazione
+   Private m_ViewModeList As ObservableCollection(Of IdNameStruct)
+   Public Property ViewModeList As ObservableCollection(Of IdNameStruct)
+      Get
+         Return m_ViewModeList
+      End Get
+      Set(value As ObservableCollection(Of IdNameStruct))
+         m_ViewModeList = value
+      End Set
+   End Property
+
+   'Scelta modalita' di visualizzazione
+   Private m_SelViewMode As IdNameStruct
+   Public Property SelViewMode As IdNameStruct
+      Get
+         Return m_SelViewMode
+      End Get
+      Set(value As IdNameStruct)
+         m_SelViewMode = value
+         Select Case m_SelViewMode.Id
+            Case VisualizationType.LISTTEMPLATE
+               m_nSelTab = VisualizationContainerType.LISTBOX
+               nSelTempleteListView = 0
+               WriteMainPrivateProfileString(S_TEMPLETESEL, K_CURRTEMPLETESEL, VisualizationType.LISTTEMPLATE)
+            Case VisualizationType.TILESTEMPLATE
+               m_nSelTab = VisualizationContainerType.LISTBOX
+               nSelTempleteListView = 1
+               WriteMainPrivateProfileString(S_TEMPLETESEL, K_CURRTEMPLETESEL, VisualizationType.TILESTEMPLATE)
+            Case VisualizationType.CONTENTTEMPLATE
+               m_nSelTab = VisualizationContainerType.LISTBOX
+               nSelTempleteListView = 2
+               WriteMainPrivateProfileString(S_TEMPLETESEL, K_CURRTEMPLETESEL, VisualizationType.CONTENTTEMPLATE)
+            Case VisualizationType.DETAILSTEMPLATE
+               m_nSelTab = VisualizationContainerType.DATAGRID
+               WriteMainPrivateProfileString(S_TEMPLETESEL, K_CURRTEMPLETESEL, VisualizationType.DETAILSTEMPLATE)
+         End Select
+         NotifyPropertyChanged(NameOf(nSelTab))
+      End Set
+   End Property
+
+   ' Indice modalita' di visualizzazione
+   Private m_nSelViewModeIndex As Integer
+   Public Property nSelViewModeIndex As Integer
+      Get
+         Return m_nSelViewModeIndex
+      End Get
+      Set(value As Integer)
+         m_nSelViewModeIndex = value
+      End Set
+   End Property
+
+   ' indice di selezione del TabControl che cambia la ListBox/DataGrid
+   Private m_nSelTab As Integer
+   Public Property nSelTab As Integer
+      Get
+         Return m_nSelTab
+      End Get
+      Set(value As Integer)
+         m_nSelTab = value
+      End Set
+   End Property
+
+#Region "Initial data from window opening"
+
+   ' Indice del filtro estensione impostato durante creazione finestra
+   Private m_nFilterIndex As Integer
+   Public Property nFilterIndex As Integer
+      Get
+         Return m_nFilterIndex
+      End Get
+      Set(value As Integer)
+         m_nFilterIndex = value
+         m_SelFilter = m_FilterList.FirstOrDefault(Function(x) x.nIndexExstension = m_nFilterIndex)
+      End Set
+   End Property
+
+   ' lista delle estensioni impostata durante creazione finestra
+   Private m_sFilter As String
+   Public Property sFilter As String
+      Get
+         Return m_sFilter
+      End Get
+      Set(value As String)
+         m_sFilter = value
+         Dim nIndex As Integer = 1
+         If Not IsNothing(sFilter) Then
+            Dim FilterListSplit As String() = sFilter.Split("|"c)
+            For i As Integer = 0 To FilterListSplit.Count - 1
+               If i Mod 2 = 0 Then
+                  Dim strExstension As New EgtExstension() With {.m_nIndexExstension = nIndex, .sNameExstension = FilterListSplit(i), .sExstension = FilterListSplit(i + 1)}
+                  m_FilterList.Add(strExstension)
+                  nIndex += 1
+               End If
+            Next
+         End If
+      End Set
+   End Property
+
+   ' Path della cartella iniziale impostata durante creazione finestra
+   Private m_sInitialDirectory As String
+   Public Property sInitialDirectory As String
+      Get
+         Return m_sInitialDirectory
+      End Get
+      Set(value As String)
+         m_sInitialDirectory = value
+         m_sSaveFileName = "New.icrs"
+         m_sSelPath = m_sInitialDirectory
+         Dim DirectoryStart As String() = m_sInitialDirectory.Split("\"c)
+
+         For i As Integer = 0 To m_RootList.Count - 1
+            If m_RootList(i).sName.Trim("\") = DirectoryStart(0) Then
+               m_RootList(i).IsExpanded = True
+               Dim CurrItem As EgtFolder = TryCast(m_RootList(i), EgtFolder)
+               If Not IsNothing(CurrItem) Then
+                  For j As Integer = 0 To CurrItem.FolderList.Count - 1
+                     If CurrItem.FolderList(j).sName = DirectoryStart(1) Then
+                        CurrItem.FolderList(j).IsExpanded = True
+                        Dim ItemFolder As EgtFolder = TryCast(CurrItem.FolderList(j), EgtFolder)
+                        If Not IsNothing(ItemFolder) Then
+                           For y As Integer = 0 To ItemFolder.FolderList.Count - 1
+                              If ItemFolder.FolderList(y).sName = DirectoryStart(2) Then
+                                 ItemFolder.FolderList(y).IsExpanded = True
+                                 ItemFolder.FolderList(y).IsSelected = True
+                              End If
+                           Next
+                        End If
+                     End If
+                  Next
+               End If
+            End If
+         Next
+      End Set
+   End Property
+
+   ' Nome del file iniziale impostato durante creazione finestra
+   Private m_sFileName As String
+   Public Property sFileName As String
+      Get
+         Return m_sFileName
+      End Get
+      Set(value As String)
+         m_sFileName = value
+         m_sSaveFileName = m_sFileName
+      End Set
+   End Property
+
+#End Region    ' Initial data from window opening
+
+   ' Scelta per la visualizzazione del templete della lista
+   Private m_nSelTempleteListView As Integer
+   Public Property nSelTempleteListView As String
+      Get
+         Return m_nSelTempleteListView
+      End Get
+      Set(value As String)
+         m_nSelTempleteListView = value
+         NotifyPropertyChanged(NameOf(nSelTempleteListView))
+      End Set
+   End Property
+
+#Region "Messages"
+
+   Public ReadOnly Property Name_Msg As String
+      Get
+         Return EgtMsg(15060)
+      End Get
+   End Property
+
+   Public ReadOnly Property LastModify_Msg As String
+      Get
+         Return EgtMsg(15061)
+      End Get
+   End Property
+
+   Public ReadOnly Property Type_Msg As String
+      Get
+         Return EgtMsg(15062)
+      End Get
+   End Property
+
+   Public ReadOnly Property Dimension_Msg As String
+      Get
+         Return EgtMsg(15063)
+      End Get
+   End Property
+
+   Public ReadOnly Property FileName_Msg As String
+      Get
+         Return If(m_nMode = ModeTypes.FILE, EgtMsg(15065), EgtMsg(15066))                ' File Name          Folder Name
+      End Get
+   End Property
+
+#End Region
+
+   'Comandi
+   Private m_cmdCancel As ICommand
+   Private m_cmdOk As ICommand
+   Private m_cmdGoBack As ICommand
+   Private m_cmdDoubleClick As ICommand
+   Friend Event m_CloseWindow(bDialogResult As MessageBoxResult)
+
+#End Region    ' FIELDS & PROPERTIES
+
+#Region "CONTRUCTORS"
+
+   Sub New()
+      m_RootList.Clear()
+      EgtDirectory.refUpdateSelTreeItem = AddressOf UpdateSelTreeItem
+      Dim drives As DriveInfo() = DriveInfo.GetDrives().Where(Function(d) d.IsReady).ToArray()
+
+      m_FilterList = New ObservableCollection(Of EgtExstension)
+
+      EgtFolder.SetEgtManageFileDialogVM(Me)
+
+      For i As Integer = 0 To drives.Count() - 1
+         Dim directory As New EgtFolder(drives(i).RootDirectory, Nothing, "\Resources\EgtDialog\Root.png")
+         m_RootList.Add(directory)
+      Next
+
+      m_SelFilter = New EgtExstension()
+      SetVisualizzationList()
+
+      Dim IndexTemplete As Integer = GetMainPrivateProfileInt(S_TEMPLETESEL, K_CURRTEMPLETESEL, VisualizationContainerType.DATAGRID)
+
+      SelViewMode = m_ViewModeList.FirstOrDefault(Function(x) x.Id = IndexTemplete)
+      'If IndexTemplete = 3 Then
+      '   m_nSelTab = VisualizationContainerType.DATAGRID
+      'Else
+      '   nSelTempleteListView = IndexTemplete
+      'End If
+
+      NotifyPropertyChanged(NameOf(RootList))
+      NotifyPropertyChanged(NameOf(FilterList))
+      NotifyPropertyChanged(NameOf(ViewModeList))
+      NotifyPropertyChanged(NameOf(FileName_Msg))
+      NotifyPropertyChanged(NameOf(SelViewMode))
+   End Sub
+
+#End Region    ' CONTRUCTORS
+
+
+#Region "METHODS"
+
+   'Private Function RootListFilter(CurrItem As Object) As Boolean
+   '   Return TypeOf CurrItem Is EgtFolder
+   'End Function
+
+   ''' <summary>
+   ''' Inizializza la ComboBox per la scelta dei template
+   ''' </summary>
+   Private Sub SetVisualizzationList()
+      m_ViewModeList = New ObservableCollection(Of IdNameStruct)
+      Dim ItemVisualization As New IdNameStruct With {
+         .Id = 0,
+         .Name = EgtMsg(15067)      'List Templete
+      }
+      m_ViewModeList.Add(ItemVisualization)
+      ItemVisualization.Id = 3
+      ItemVisualization.Name = EgtMsg(15068)    'Detalis Templete
+      m_ViewModeList.Add(ItemVisualization)
+      ItemVisualization.Id = 1
+      ItemVisualization.Name = EgtMsg(15069)    'Tiles Templete
+      m_ViewModeList.Add(ItemVisualization)
+      ItemVisualization.Id = 2
+      ItemVisualization.Name = EgtMsg(15070)    'Content Templete
+      m_ViewModeList.Add(ItemVisualization)
+   End Sub
+
+   'Private Sub Directory_PropertyChanged(sender As Object, e As PropertyChangedEventArgs)
+   '   If e.PropertyName = "IsSelected" Then
+   '      'UpdateSelRoot()
+   '   End If
+   'End Sub
+
+#End Region
+
+#Region "COMMANDS"
+
+#Region "Ok"
+
+   Public ReadOnly Property Ok_Command As ICommand
+      Get
+         If m_cmdOk Is Nothing Then
+            m_cmdOk = New Command(AddressOf Ok)
+         End If
+         Return m_cmdOk
+      End Get
+   End Property
+
+   Public Sub Ok()
+      Dim CurrItem As EgtItem = TryCast(m_ItemSelected, EgtItem)
+      If nMode = ModeTypes.FILE Then
+         If Not IsNothing(CurrItem) Then
+            m_sFileName = m_SelTreeItem.sFullName
+         Else
+            m_sFileName = m_SelTreeItem.sFullName & "\" & m_sSaveFileName
+         End If
+      ElseIf nMode = ModeTypes.FOLDER Then
+         m_sFileName = m_SelTreeItem.sFullName
+      End If
+      RaiseEvent m_CloseWindow(DialogResult.OK)
+   End Sub
+#End Region    'Ok
+
+#Region "GoBack"
+
+   Public ReadOnly Property GoBack_Command As ICommand
+      Get
+         If m_cmdGoBack Is Nothing Then
+            m_cmdGoBack = New Command(AddressOf GoBack)
+         End If
+         Return m_cmdGoBack
+      End Get
+   End Property
+
+   Public Sub GoBack()
+      If Not IsNothing(m_SelTreeItem) AndAlso Not IsNothing(m_SelTreeItem.m_ParentFolder) Then
+         If TypeOf m_SelTreeItem.m_ParentFolder Is EgtFolder Then
+            Dim CurrParentFolder As EgtFolder = DirectCast(m_SelTreeItem.m_ParentFolder, EgtFolder)
+            CurrParentFolder.SetIsSelected(True, False)
+         End If
+         m_sSelPath = DirectCast(m_SelTreeItem, EgtFolder).sFullName
+         NotifyPropertyChanged(NameOf(sSelPath))
+      End If
+   End Sub
+
+#End Region    'GoBack
+
+#Region "Cancel"
+
+   Public ReadOnly Property Cancel_Command As ICommand
+      Get
+         If m_cmdCancel Is Nothing Then
+            m_cmdCancel = New Command(AddressOf Cancel)
+         End If
+         Return m_cmdCancel
+      End Get
+   End Property
+
+   Public Sub Cancel()
+      RaiseEvent m_CloseWindow(DialogResult.Cancel)
+   End Sub
+
+#End Region    'Cancel
+
+#Region "DoubleClick"
+
+   Public ReadOnly Property DoubleClick_Command As ICommand
+      Get
+         If m_cmdDoubleClick Is Nothing Then
+            m_cmdDoubleClick = New Command(AddressOf MouseDoubleClick)
+         End If
+         Return m_cmdDoubleClick
+      End Get
+   End Property
+
+   Public Sub MouseDoubleClick()
+      m_ItemSelected.IsExpanded = True
+      If TypeOf m_ItemSelected Is EgtFolder Then
+         Dim CurrItemSelected As EgtFolder = DirectCast(m_ItemSelected, EgtFolder)
+         CurrItemSelected.SetIsSelected(True, True)
+         m_sSelPath = CurrItemSelected.sFullName
+      Else
+         m_ItemSelected.IsSelected = True
+      End If
+      NotifyPropertyChanged(NameOf(sSelPath))
+   End Sub
+
+#End Region    'DoubleClick
+
+#End Region    ' COMMANDS
+
+End Class
+
+Public Class EgtExstension
+   Inherits VMBase
+
+   ' Indice estensione
+   Public m_nIndexExstension As Integer
+   Public Property nIndexExstension As Integer
+      Get
+         Return m_nIndexExstension
+      End Get
+      Set(value As Integer)
+         m_nIndexExstension = value
+         NotifyPropertyChanged(NameOf(nIndexExstension))
+      End Set
+   End Property
+
+   ' Nome della stringa Filter Splittata           m_sNameExstension = Icarus project
+   Public m_sNameExstension As String
+   Public Property sNameExstension As String
+      Get
+         Return m_sNameExstension
+      End Get
+      Set(value As String)
+         m_sNameExstension = value
+         NotifyPropertyChanged(NameOf(sNameExstension))
+      End Set
+   End Property
+
+   ' Estensione della stringa Filter Splittata     m_sExstension = *.icrs
+   Public m_sExstension As String
+   Public Property sExstension As String
+      Get
+         Return m_sExstension
+      End Get
+      Set(value As String)
+         m_sExstension = value
+         NotifyPropertyChanged(NameOf(sExstension))
+      End Set
+   End Property
+
+End Class
+
+Public MustInherit Class EgtDirectory
+   Inherits VMBase
+
+#Region "FIELDS & PROPERTIES"
+
+   Friend Shared refUpdateSelTreeItem As Action(Of EgtDirectory)
+
+   Friend Shared m_refEgtManageFileDialogVM As EgtManageFileDialogVM
+   Friend Shared Sub SetEgtManageFileDialogVM(EgtManageFileDialogVM As EgtManageFileDialogVM)
+      m_refEgtManageFileDialogVM = EgtManageFileDialogVM
+   End Sub
+
+   Protected m_bIsSelected As Boolean
+   Public MustOverride Property IsSelected As Boolean
+
+   Protected m_bIsExpanded As Boolean
+   Public Overridable Property IsExpanded As Boolean
+
+   Public MustOverride ReadOnly Property sFullName As String
+
+   Protected m_sName As String
+   Public MustOverride ReadOnly Property sName As String
+
+   Protected m_sIconSource As String
+   Public Overridable ReadOnly Property sIconSource As String
+      Get
+         Return m_sIconSource
+      End Get
+   End Property
+
+   Protected m_sTypeItem As String
+   Public MustOverride ReadOnly Property sTypeItem As String
+
+   Protected m_ghTypeItem As String
+   Public Overridable ReadOnly Property ghTypeItem As String
+
+   Protected m_dtLastModifyDate As Date
+   Public MustOverride ReadOnly Property sLastModifyDate As String
+
+   Public m_ParentFolder As EgtFolder
+   Public Property ParentFolder As EgtFolder
+      Get
+         Return m_ParentFolder
+      End Get
+      Set(value As EgtFolder)
+         m_ParentFolder = value
+      End Set
+   End Property
+
+#End Region    ' FIELDS & PROPERTIES
+
+End Class
+
+Public Class EgtFolder
+   Inherits EgtDirectory
+
+#Region "FIELDS & PROPERTIES"
+
+   Private m_ItemList_View As CollectionView = Nothing
+   Private m_TreeItemList_ViewSource As CollectionViewSource = Nothing
+   Private m_TreeItemList_View As CollectionView = Nothing
+   Public ReadOnly Property TreeItemList_View As CollectionView
+      Get
+         Return m_TreeItemList_View
+      End Get
+   End Property
+
+   Private m_DirectoryInfo As DirectoryInfo
+
+   Private m_FolderList As New ObservableCollection(Of EgtDirectory)
+   Public Property FolderList As ObservableCollection(Of EgtDirectory)
+      Get
+         Return m_FolderList
+      End Get
+      Set(value As ObservableCollection(Of EgtDirectory))
+         m_FolderList = value
+      End Set
+   End Property
+
+   Public Overrides ReadOnly Property sFullName As String
+      Get
+         Return m_DirectoryInfo.FullName
+      End Get
+   End Property
+
+   Public Overrides ReadOnly Property sName As String
+      Get
+         Return m_DirectoryInfo.Name
+      End Get
+   End Property
+
+   Public Overrides ReadOnly Property sTypeItem As String
+      Get
+         Return EgtMsg(15064)
+      End Get
+   End Property
+
+   Public Overrides ReadOnly Property sLastModifyDate As String
+      Get
+         Return m_DirectoryInfo.LastWriteTime.ToString("dd/MM/yyyy HH:mm:ss")
+      End Get
+   End Property
+
+   Public Overrides Property IsExpanded As Boolean
+      Get
+         Return m_bIsExpanded
+      End Get
+      Set(value As Boolean)
+         m_bIsExpanded = value
+         NotifyPropertyChanged(NameOf(IsExpanded))
+         If m_bIsExpanded Then
+            SetFolderList()
+         End If
+      End Set
+   End Property
+
+   Public Overrides Property IsSelected As Boolean
+      Get
+         Return m_bIsSelected
+      End Get
+      Set(value As Boolean)
+         m_bIsSelected = value
+         m_refEgtManageFileDialogVM.sSelPath = m_DirectoryInfo.FullName
+         If m_bIsSelected Then
+            SetFolderList()
+            refUpdateSelTreeItem(Me)
+            NotifyPropertyChanged(NameOf(IsSelected))
+         End If
+      End Set
+   End Property
+   Friend Sub SetIsSelected(value As Boolean, bRefreshList As Boolean)
+      Dim sSelListItemPath As String = ""
+      If Not IsNothing(m_refEgtManageFileDialogVM.SelTreeItem) Then
+         sSelListItemPath = m_refEgtManageFileDialogVM.SelTreeItem.sFullName
+      End If
+      m_bIsSelected = value
+      m_refEgtManageFileDialogVM.sSelPath = m_DirectoryInfo.FullName
+      If m_bIsSelected Then
+         If bRefreshList Then SetFolderList()
+         refUpdateSelTreeItem(Me)
+      End If
+      If Not IsNothing(sSelListItemPath) Then
+         Dim SelFolderItem As EgtDirectory = m_FolderList.FirstOrDefault(Function(x) x.sFullName = sSelListItemPath)
+         If Not IsNothing(SelFolderItem) Then
+            m_refEgtManageFileDialogVM.SetItemSelected(SelFolderItem)
+         End If
+      End If
+      NotifyPropertyChanged(NameOf(IsSelected))
+   End Sub
+
+#End Region    ' FIELDS & PROPERTIES
+
+#Region "CONTRUCTORS"
+
+   Sub New()
+   End Sub
+
+   Sub New(DirectoryInfo As DirectoryInfo, Parent As EgtDirectory, Optional IconSource As String = "\Resources\EgtDialog\Folder.png")
+      m_DirectoryInfo = DirectoryInfo
+      m_sIconSource = IconSource
+      Try
+         If DirectoryInfo.EnumerateDirectories.Count > 0 Then
+            m_FolderList.Add(New EgtFolder())
+         End If
+      Catch ex As Exception
+      End Try
+      m_ParentFolder = Parent
+
+      m_ItemList_View = CollectionViewSource.GetDefaultView(m_FolderList)
+      m_ItemList_View.Filter = AddressOf ItemFilter
+      m_TreeItemList_ViewSource = New CollectionViewSource() With {.Source = m_FolderList}
+      m_TreeItemList_View = m_TreeItemList_ViewSource.View
+      m_TreeItemList_View.Filter = AddressOf TreeItemListFilter
+
+      NotifyPropertyChanged(NameOf(sName))
+      NotifyPropertyChanged(NameOf(sLastModifyDate))
+      NotifyPropertyChanged(NameOf(sTypeItem))
+      NotifyPropertyChanged(NameOf(sIconSource))
+      NotifyPropertyChanged(NameOf(FolderList))
+      NotifyPropertyChanged(NameOf(ParentFolder))
+   End Sub
+
+#End Region    '  CONTRUCTORS
+
+#Region "METHODS"
+
+   ''' <summary>
+   ''' Funzione per la visualizzazione delle sole cartelle nell'albero TreeView
+   ''' </summary>
+   ''' <param name="CurrItem"></param>
+   ''' <returns></returns>
+   Private Function TreeItemListFilter(CurrItem As Object) As Boolean
+      Return TypeOf CurrItem Is EgtFolder
+   End Function
+
+   ''' <summary>
+   ''' Funzione per il controllo del filtro per i singoli Item    se l'estensione scelta e' .icrs verrano visualizzati tutti i file con l'estensione .icrs
+   ''' </summary>
+   ''' <param name="Item"></param>
+   ''' <returns></returns>
+   Private Function ItemFilter(Item As Object) As Boolean
+      Dim CurrItem As EgtItem = TryCast(Item, EgtItem)
+      If Not IsNothing(CurrItem) AndAlso Not IsNothing(m_refEgtManageFileDialogVM.m_SelFilter.m_sExstension) Then
+         If CurrItem.sTypeItem = m_refEgtManageFileDialogVM.m_SelFilter.m_sExstension.TrimStart("*") Then
+            Return True
+         Else
+            Return False
+         End If
+      End If
+      Return True
+   End Function
+
+   ''' <summary>
+   ''' Funzione per popolare la lista FolderList
+   ''' </summary>
+   Private Sub SetFolderList()
+      Dim DirectoryList() As DirectoryInfo
+      Dim FileList() As FileInfo
+      Try
+         DirectoryList = m_DirectoryInfo.GetDirectories().Where(Function(file) (file.Attributes And FileAttributes.Hidden And file.Name <> EgtMsg(15071)) = 0).ToArray()
+         FileList = m_DirectoryInfo.GetFiles().Where(Function(file) (file.Attributes And FileAttributes.Hidden) = 0).ToArray()
+      Catch ex As Exception
+         DirectoryList = Nothing
+         FileList = Nothing
+      End Try
+      m_FolderList.Clear()
+      If Not IsNothing(DirectoryList) AndAlso m_FolderList.Count = 0 Then
+         For Each subDir As DirectoryInfo In DirectoryList
+            Dim directory As New EgtFolder(subDir, Me)
+            m_FolderList.Add(directory)
+         Next
+      End If
+      If Not IsNothing(FileList) Then
+         For Each files As FileInfo In FileList
+            Dim file As New EgtItem(files)
+            m_FolderList.Add(file)
+         Next
+      End If
+   End Sub
+
+#End Region
+
+End Class
+
+Public Class EgtItem
+   Inherits EgtDirectory
+
+#Region "FIELDS & PROPERTIES"
+
+   Private m_FileInfo As FileInfo
+
+   Public Overrides ReadOnly Property sFullName As String
+      Get
+         Return m_FileInfo.FullName
+      End Get
+   End Property
+
+   Public Overrides ReadOnly Property sName As String
+      Get
+         Return m_FileInfo.Name
+      End Get
+   End Property
+
+   Public Overrides ReadOnly Property sTypeItem As String
+      Get
+         If Not IsNothing(m_FileInfo) AndAlso Not IsNothing(m_FileInfo.Extension) AndAlso Not String.IsNullOrWhiteSpace(m_FileInfo.Extension) Then
+            Return m_FileInfo.Extension
+         Else
+            Return ""
+         End If
+      End Get
+   End Property
+
+   Public Overrides ReadOnly Property ghTypeItem As String
+      Get
+         Return If(Not String.IsNullOrWhiteSpace(sTypeItem), "File " & sTypeItem.ToUpper(), "")
+      End Get
+   End Property
+
+   Public ReadOnly Property sDimension As String
+      Get
+         Return If(m_FileInfo.Length / 1024 / 1024 > 1, String.Format("{0:#,##0.00}", m_FileInfo.Length / 1024 / 1024) & " Mb", String.Format("{0:#,##0.00}", m_FileInfo.Length / 1024) & " Kb")
+      End Get
+   End Property
+
+   Public Overrides ReadOnly Property sLastModifyDate As String
+      Get
+         Return m_FileInfo.LastWriteTime.ToString("dd/MM/yyyy HH:mm:ss")
+      End Get
+   End Property
+
+   Public Overrides Property IsSelected As Boolean
+      Get
+         Return m_bIsSelected
+      End Get
+      Set(value As Boolean)
+         m_bIsSelected = value
+         refUpdateSelTreeItem(Me)
+      End Set
+   End Property
+
+#End Region    ' FIELDS & PROPERTIES
+
+#Region "CONTRUCTORS"
+
+   Sub New(FileInfo As FileInfo)
+      m_FileInfo = FileInfo
+      m_sIconSource = "\Resources\EgtDialog\New.png"
+      NotifyPropertyChanged(NameOf(sName))
+      NotifyPropertyChanged(NameOf(sDimension))
+      NotifyPropertyChanged(NameOf(sLastModifyDate))
+      NotifyPropertyChanged(NameOf(sTypeItem))
+      NotifyPropertyChanged(NameOf(sIconSource))
+   End Sub
+
+#End Region    '  CONTRUCTORS
+
+End Class
+

Icarus/EgtMessageBox/EgtMessageBoxV.xaml

@@ -0,0 +1,55 @@
+<EgtWPFLib5:EgtMainWindow x:Class="EgtMessageBoxV"
+                          xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+                          xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+                          xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+                          Title="{Binding sTitle}"
+                          SizeToContent="WidthAndHeight"
+                          WindowStartupLocation="CenterOwner"
+                          Style="{StaticResource Dialog_Window}">
+   <Grid Margin="2.5,2.5,2.5,0">
+      <Grid.RowDefinitions>
+         <RowDefinition Height="Auto"/>
+         <RowDefinition Height="Auto"/>
+      </Grid.RowDefinitions>
+      <Grid Margin="20,20,20,20">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="Auto"/>
+            <ColumnDefinition Width="1*"/>
+         </Grid.ColumnDefinitions>
+         <Image Source="{Binding sIconSource}"
+                Margin="0,0,0,0"/>
+         <TextBlock Grid.Column="1"
+                    Text="{Binding sMessage}"
+                    Margin="5,0,5,0"
+                    Style="{StaticResource DialogWindow_TextBlock}"/>
+      </Grid>
+      <ItemsControl Grid.Row="1"
+                    ItemsSource="{Binding ButtonList}"
+                    HorizontalAlignment="Center">
+         <ItemsControl.ItemsPanel>
+            <ItemsPanelTemplate>
+               <UniformGrid Rows="1"/>
+            </ItemsPanelTemplate>
+         </ItemsControl.ItemsPanel>
+         <ItemsControl.ItemTemplate>
+            <DataTemplate>
+               <Button IsDefault="{Binding bIsDefault}"
+                       Content="{Binding sMessage}"
+                       Command="{Binding Command_Command}"
+                       Margin="2.5,0,2.5,0"
+                       Style="{StaticResource RightPanel_HalfRound_Button}"/>
+            </DataTemplate>
+         </ItemsControl.ItemTemplate>
+         
+      </ItemsControl>
+      <!--<UniformGrid Grid.Column="1"
+                   Grid.Row="1"
+                   Rows="1">
+         <Button IsCancel="True"
+                 Content="Ok"
+                 Command="{Binding Ok_Command}"
+                 Style="{StaticResource RightPanel_HalfRound_Button}"/>
+      </UniformGrid>-->
+   </Grid>
+</EgtWPFLib5:EgtMainWindow>
+   

Icarus/EgtMessageBox/EgtMessageBoxV.xaml.vb

@@ -0,0 +1,107 @@
+Public Class EgtMessageBoxV
+
+#Region "FIELDS & PROPERTIES"
+
+   Private WithEvents m_EgtMessageBoxVM As EgtMessageBoxVM
+
+   Private Shadows DialogResult As MessageBoxResult
+
+#End Region    ' FIELDS & PROPERTIES
+
+#Region "CONTRUCTORS"
+
+   Sub New(Owner As Window, EgtMessageBoxVM As EgtMessageBoxVM)
+      MyBase.New(Owner)
+      ' This call is required by the designer.
+      InitializeComponent()
+      Me.DataContext = EgtMessageBoxVM
+      ' Assegno al riferimento locale al VM il VM preso dal DataContext
+      m_EgtMessageBoxVM = EgtMessageBoxVM
+   End Sub
+
+#End Region
+
+#Region "METHODS"
+
+   ''' <summary>
+   ''' Apre una EgtMessageBox con un messaggio che ritorna un risultato
+   ''' </summary>
+   ''' <param name="Owner">Finestra di appartenenza</param>
+   ''' <param name="sMessageBoxText">Stringa che specifica il messaggio da mostrare</param>
+   ''' <returns>Valore che specifica quale bottone e' stato premuto dall'utente</returns>
+   Public Overloads Shared Function Show(Owner As Window, sMessageBoxText As String) As MessageBoxResult
+      Dim NewMessagebox As New EgtMessageBoxV(Owner, New EgtMessageBoxVM(sMessageBoxText))
+      NewMessagebox.ShowDialog()
+      Return NewMessagebox.DialogResult
+   End Function
+
+   ''' <summary>
+   ''' Apre una EgtMessageBox con un titolo ed un messaggio che ritorna un risultato
+   ''' </summary>
+   ''' <param name="Owner">Finestra di appartenenza</param>
+   ''' <param name="sMessageBoxText">Stringa che specifica il messaggio da mostrare</param>
+   ''' <param name="sCaption">Stringa che specifica il titolo da mostrare</param>
+   ''' <returns>Valore che specifica quale bottone e' stato premuto dall'utente</returns>
+   Public Overloads Shared Function Show(Owner As Window, sMessageBoxText As String, sCaption As String) As MessageBoxResult
+      Dim NewMessagebox As New EgtMessageBoxV(Owner, New EgtMessageBoxVM(sMessageBoxText, sCaption))
+      NewMessagebox.ShowDialog()
+      Return NewMessagebox.DialogResult
+   End Function
+
+   ''' <summary>
+   ''' Apre una EgtMessageBox con un titolo ed un messaggio che ritorna un risultato
+   ''' </summary>
+   ''' <param name="Owner">Finestra di appartenenza</param>
+   ''' <param name="sMessageBoxText">Stringa che specifica il messaggio da mostrare</param>
+   ''' <param name="sCaption">Stringa che specifica il titolo da mostrare</param>
+   ''' <param name="Button">Valore che specifica quali bottoni mostrare</param>
+   ''' <returns>Valore che specifica quale bottone e' stato premuto dall'utente</returns>
+   Public Overloads Shared Function Show(Owner As Window, sMessageBoxText As String, sCaption As String, Button As MessageBoxButton) As MessageBoxResult
+      Dim NewMessagebox As New EgtMessageBoxV(Owner, New EgtMessageBoxVM(sMessageBoxText, sCaption, Button))
+      NewMessagebox.ShowDialog()
+      Return NewMessagebox.DialogResult
+   End Function
+
+   ''' <summary>
+   ''' Apre una EgtMessageBox con un titolo ed un messaggio che ritorna un risultato
+   ''' </summary>
+   ''' <param name="Owner">Finestra di appartenenza</param>
+   ''' <param name="sMessageBoxText">Stringa che specifica il messaggio da mostrare</param>
+   ''' <param name="sCaption">Stringa che specifica il titolo da mostrare</param>
+   ''' <param name="Button">Valore che specifica quali bottoni mostrare</param>
+   ''' <param name="Icon">Valore che specifica quale icona mostrare</param>
+   ''' <returns>Valore che specifica quale bottone e' stato premuto dall'utente</returns>
+   Public Overloads Shared Function Show(Owner As Window, sMessageBoxText As String, sCaption As String, Button As MessageBoxButton, Icon As MessageBoxImage) As MessageBoxResult
+      Dim NewMessagebox As New EgtMessageBoxV(Owner, New EgtMessageBoxVM(sMessageBoxText, sCaption, Button, Icon))
+      NewMessagebox.ShowDialog()
+      Return NewMessagebox.DialogResult
+   End Function
+
+   ''' <summary>
+   ''' Apre una EgtMessageBox con un titolo ed un messaggio che ritorna un risultato
+   ''' </summary>
+   ''' <param name="Owner">Finestra di appartenenza</param>
+   ''' <param name="sMessageBoxText">Stringa che specifica il messaggio da mostrare</param>
+   ''' <param name="sCaption">Stringa che specifica il titolo da mostrare</param>
+   ''' <param name="Button">Valore che specifica quali bottoni mostrare</param>
+   ''' <param name="Icon">Valore che specifica quale icona mostrare</param>
+   ''' <param name="DefaultResult">Valore che specifica il bottone di default</param>
+   ''' <returns>Valore che specifica quale bottone e' stato premuto dall'utente</returns>
+   Public Overloads Shared Function Show(Owner As Window, sMessageBoxText As String, sCaption As String, Button As MessageBoxButton, Icon As MessageBoxImage, DefaultResult As MessageBoxResult) As MessageBoxResult
+      Dim NewMessagebox As New EgtMessageBoxV(Owner, New EgtMessageBoxVM(sMessageBoxText, sCaption, Button, Icon, DefaultResult))
+      NewMessagebox.ShowDialog()
+      Return NewMessagebox.DialogResult
+   End Function
+
+#End Region    ' METHODS
+
+#Region "EVENTS"
+
+   Private Sub CloseWindow(DialogResult As MessageBoxResult) Handles m_EgtMessageBoxVM.m_CloseWindow
+      Me.DialogResult = DialogResult
+      Me.Close()
+   End Sub
+
+#End Region
+
+End Class

Icarus/EgtMessageBox/EgtMessageBoxVM.vb

@@ -0,0 +1,236 @@
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class EgtMessageBoxVM
+   Inherits VMBase
+
+#Region "FIELDS & PROPERTIES"
+
+   Friend Event m_CloseWindow(DialogResult As MessageBoxResult)
+
+   Private m_sTitle As String = ""
+   Public ReadOnly Property sTitle As String
+      Get
+         Return m_sTitle
+      End Get
+   End Property
+
+   Private m_sMessage As String = ""
+   Public ReadOnly Property sMessage As String
+      Get
+         Return m_sMessage
+      End Get
+   End Property
+
+   Private m_Button As MessageBoxButton
+
+   Private m_Icon As MessageBoxImage
+   Public ReadOnly Property sIconSource As String
+      Get
+         Select Case m_Icon
+            Case MessageBoxImage.Hand
+               Return "\Resources\EgtMessageBox\Error.png"
+            Case MessageBoxImage.Question
+               Return "\Resources\EgtMessageBox\Question.png"
+            Case MessageBoxImage.Exclamation
+               Return "\Resources\EgtMessageBox\Warning.png"
+            Case MessageBoxImage.Asterisk
+               Return "\Resources\EgtMessageBox\Information.png"
+            Case MessageBoxImage.Stop
+               Return "\Resources\EgtMessageBox\Error.png"
+            Case MessageBoxImage.Error
+               Return "\Resources\EgtMessageBox\Error.png"
+            Case MessageBoxImage.Warning
+               Return "\Resources\EgtMessageBox\Warning.png"
+            Case MessageBoxImage.Information
+               Return "\Resources\EgtMessageBox\Information.png"
+            Case Else ' MessageBoxImage.None
+               Return ""
+         End Select
+      End Get
+   End Property
+
+   Private m_ButtonList As New List(Of EgtMsgBoxButton)
+   Public Property ButtonList As List(Of EgtMsgBoxButton)
+      Get
+         Return m_ButtonList
+      End Get
+      Set(value As List(Of EgtMsgBoxButton))
+         m_ButtonList = value
+      End Set
+   End Property
+
+#End Region    ' FIELDS & PROPERTIES
+
+#Region "CONTRUCTORS"
+
+   Sub New(sMessageBoxText As String)
+      EgtMsgBoxButton.SetOwner(Me)
+      m_sMessage = sMessageBoxText
+      m_Button = MessageBoxButton.OK
+      m_Icon = MessageBoxImage.None
+      NotifyPropertyChanged(NameOf(ButtonList))
+      NotifyPropertyChanged(NameOf(sIconSource))
+   End Sub
+
+   Sub New(sMessageBoxText As String, sCaption As String)
+      MyClass.New(sMessageBoxText)
+      m_sTitle = sCaption
+   End Sub
+
+   Sub New(sMessageBoxText As String, sCaption As String, Button As MessageBoxButton)
+      MyClass.New(sMessageBoxText, sCaption)
+      m_Button = Button
+      Select Case m_Button
+         Case MessageBoxButton.OK
+            m_ButtonList.Add(New EgtMsgBoxButton(EgtMsgBoxButton.Types.OK))
+         Case MessageBoxButton.OKCancel
+            m_ButtonList.Add(New EgtMsgBoxButton(EgtMsgBoxButton.Types.OK))
+            m_ButtonList.Add(New EgtMsgBoxButton(EgtMsgBoxButton.Types.CANCEL))
+         Case MessageBoxButton.YesNoCancel
+            m_ButtonList.Add(New EgtMsgBoxButton(EgtMsgBoxButton.Types.YES))
+            m_ButtonList.Add(New EgtMsgBoxButton(EgtMsgBoxButton.Types.NO))
+            m_ButtonList.Add(New EgtMsgBoxButton(EgtMsgBoxButton.Types.CANCEL))
+         Case MessageBoxButton.YesNo
+            m_ButtonList.Add(New EgtMsgBoxButton(EgtMsgBoxButton.Types.YES))
+            m_ButtonList.Add(New EgtMsgBoxButton(EgtMsgBoxButton.Types.NO))
+      End Select
+      NotifyPropertyChanged(NameOf(ButtonList))
+   End Sub
+
+   Sub New(sMessageBoxText As String, sCaption As String, Button As MessageBoxButton, Icon As MessageBoxImage)
+      MyClass.New(sMessageBoxText, sCaption, Button)
+      m_Icon = Icon
+      NotifyPropertyChanged(NameOf(sIconSource))
+   End Sub
+
+   Sub New(sMessageBoxText As String, sCaption As String, Button As MessageBoxButton, Icon As MessageBoxImage, DefaultResult As MessageBoxResult)
+      MyClass.New(sMessageBoxText, sCaption, Button, Icon)
+      Dim DefaultBtn As EgtMsgBoxButton = m_ButtonList.FirstOrDefault(Function(x) (x.Type = EgtMsgBoxButton.Types.OK AndAlso DefaultResult = MessageBoxResult.OK) OrElse
+                                                                                  (x.Type = EgtMsgBoxButton.Types.CANCEL AndAlso DefaultResult = MessageBoxResult.Cancel) OrElse
+                                                                                  (x.Type = EgtMsgBoxButton.Types.YES AndAlso DefaultResult = MessageBoxResult.Yes) OrElse
+                                                                                  (x.Type = EgtMsgBoxButton.Types.NO AndAlso DefaultResult = MessageBoxResult.No))
+      If Not IsNothing(DefaultBtn) Then
+         DefaultBtn.SetIsDefault(True)
+      End If
+      NotifyPropertyChanged(NameOf(ButtonList))
+   End Sub
+
+#End Region    ' CONTRUCTORS
+
+#Region "METHODS"
+
+   Friend Sub CloseWindow(DialogResult As MessageBoxResult)
+      RaiseEvent m_CloseWindow(DialogResult)
+   End Sub
+
+#End Region    ' METHODS
+
+
+End Class
+
+Public Class EgtMsgBoxButton
+   Inherits VMBase
+
+#Region "FIELDS & PROPERTIES"
+
+   Public Enum Types As Integer
+      OK = 1
+      CANCEL = 2
+      YES = 3
+      NO = 4
+   End Enum
+
+   Private Shared Owner As EgtMessageBoxVM
+
+   Private m_Type As Types
+   Public ReadOnly Property Type As Types
+      Get
+         Return m_Type
+      End Get
+   End Property
+
+   Private m_sMessage As String
+   Public ReadOnly Property sMessage As String
+      Get
+         Return m_sMessage
+      End Get
+   End Property
+
+   Private m_bIsDefault As Boolean = False
+   Public ReadOnly Property bIsDefault As Boolean
+      Get
+         Return m_bIsDefault
+      End Get
+   End Property
+   Friend Sub SetIsDefault(bValue As Boolean)
+      m_bIsDefault = bValue
+   End Sub
+
+   ' Definizione comandi
+   Private m_cmdCommand As ICommand
+
+#End Region    ' FIELDS & PROPERTIES
+
+#Region "CONTRUCTORS"
+
+   Sub New(Type As Types)
+      m_Type = Type
+      Select Case m_Type
+         Case Types.OK
+            m_sMessage = EgtMsg(35001)
+         Case Types.CANCEL
+            m_sMessage = EgtMsg(35002)
+         Case Types.YES
+            m_sMessage = EgtMsg(35003)
+         Case Types.NO
+            m_sMessage = EgtMsg(35004)
+      End Select
+   End Sub
+
+   Sub New(Type As Types, bIsDefault As Boolean)
+      MyClass.New(Type)
+      m_bIsDefault = bIsDefault
+   End Sub
+
+#End Region    ' CONTRUCTORS
+
+#Region "METHODS"
+
+   Friend Shared Sub SetOwner(value As EgtMessageBoxVM)
+      Owner = value
+   End Sub
+
+#End Region    ' METHODS
+
+#Region "COMMANDS"
+
+#Region "Command"
+
+   Public ReadOnly Property Command_Command As ICommand
+      Get
+         If m_cmdCommand Is Nothing Then
+            m_cmdCommand = New Command(AddressOf Command)
+         End If
+         Return m_cmdCommand
+      End Get
+   End Property
+
+   Public Sub Command()
+      Select Case m_Type
+         Case Types.OK
+            Owner.CloseWindow(MessageBoxResult.OK)
+         Case Types.CANCEL
+            Owner.CloseWindow(MessageBoxResult.Cancel)
+         Case Types.YES
+            Owner.CloseWindow(MessageBoxResult.Yes)
+         Case Types.NO
+            Owner.CloseWindow(MessageBoxResult.No)
+      End Select
+   End Sub
+
+#End Region ' Command
+
+#End Region    ' COMMANDS 
+
+End Class

Icarus/FilledSolidPanel/FilledSolidPanelVM.vb

@@ -35,6 +35,10 @@ Public Class FilledSolidPanelVM
          Return m_SelFilledSolid
       End Get
       Set(value As FilledSolidEntity)
+         If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse Map.refFilledSolidPanelVM.bCPlaneObj_IsActive Then
+            NotifyPropertyChanged(NameOf(SelFilledSolid))
+            Return
+         End If
          m_SelFilledSolid = value
          EgtDeselectAll()
          If Not IsNothing(value) Then
@@ -349,6 +353,8 @@ Public Class FilledSolidPanelVM
             NotifyPropertyChanged(NameOf(bRotate_IsChecked))
             Map.refRightPanelVM.SetSelPanel(RightPanelVM.Panels.AUXSOLIDPARAM)
             NotifyPropertyChanged(NameOf(FilledSolidList_IsEnabled))
+            ' disattivo interfaccia
+            ManageInterface(False)
          Else
             NotifyPropertyChanged(NameOf(m_bMachParam_IsChecked))
          End If
@@ -358,6 +364,8 @@ Public Class FilledSolidPanelVM
       m_bMachParam_IsChecked = False
       NotifyPropertyChanged(NameOf(bMachParam_IsChecked))
       NotifyPropertyChanged(NameOf(FilledSolidList_IsEnabled))
+      ' riattivo interfaccia
+      ManageInterface(True)
    End Sub
 
    Public ReadOnly Property Compo_Visibility As Visibility
@@ -366,11 +374,17 @@ Public Class FilledSolidPanelVM
       End Get
    End Property
 
+   Private m_FilledSolidList_IsEnabled As Boolean = False
    Public ReadOnly Property FilledSolidList_IsEnabled As Boolean
       Get
-         Return Not m_bMachParam_IsChecked
+         Return If(m_FilledSolidList.Count > 0, m_FilledSolidList_IsEnabled, False)
       End Get
    End Property
+   Friend Sub SetFilledSolidListIsEnabled(bValue As Boolean)
+      m_FilledSolidList_IsEnabled = bValue
+      NotifyPropertyChanged(NameOf(FilledSolidList_IsEnabled))
+   End Sub
+
    ' riferimento griglia all'ingresso in questa pagina
    Private m_OriginalGridFrame As New Frame3d
 
@@ -388,6 +402,8 @@ Public Class FilledSolidPanelVM
       End Get
    End Property
 
+   Private m_bEscOnLine2P As Boolean = False
+
 #Region "Tooltip"
 
    Public ReadOnly Property Import_ToolTip As String
@@ -571,6 +587,8 @@ Public Class FilledSolidPanelVM
          SelFilledSolid = m_FilledSolidList(0)
          NotifyPropertyChanged(NameOf(SelFilledSolid))
       End If
+      ' attivo lista filled solid
+      SetFilledSolidListIsEnabled(True)
       Map.refSceneHostVM.MainScene.SetStatusNull()
    End Sub
 
@@ -606,8 +624,13 @@ Public Class FilledSolidPanelVM
             EgtSelectObj(m_SelFilledSolid.nCurveId)
          Case FilledSolidSelectionTypes.EXTRUSION
             ' creo layer per estrusione
-            Dim nNewExtrusionLayerId As Integer = EgtCreateGroup(m_nPartId)
-            EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
+            Dim nNewExtrusionLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWEXTRUSION)
+            If nNewExtrusionLayerId = GDB_ID.NULL Then
+               nNewExtrusionLayerId = EgtCreateGroup(m_nPartId)
+               EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
+            Else
+               EgtEmptyGroup(nNewExtrusionLayerId)
+            End If
             EgtSetCurrPartLayer(m_nPartId, nNewExtrusionLayerId)
             EgtSelectObj(m_SelFilledSolid.nCurveId)
          Case FilledSolidSelectionTypes.BOTH
@@ -615,6 +638,8 @@ Public Class FilledSolidPanelVM
             EgtSelectObj(m_SelFilledSolid.nExtrusionId)
       End Select
       EgtDraw()
+      ' disattivo il resto dell'interfaccia
+      ManageInterface(False)
       Return True
    End Function
 
@@ -624,6 +649,7 @@ Public Class FilledSolidPanelVM
    End Sub
 
    Friend Sub OnExecCmdEnd(command As Controller.CMD)
+      m_bEscOnLine2P = False
       Select Case command
          Case Controller.CMD.MODIFYCURVE, Controller.CMD.ADDPOINTCURVE, Controller.CMD.REMOVEPOINTCURVE
             ' leggo altezza estrusione
@@ -663,6 +689,10 @@ Public Class FilledSolidPanelVM
             ' Imposto flag di ricalcolo slice
             EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
       End Select
+      ' se non ho creato percorso riabilito interfaccia
+      If Not m_bIsCreatingPath Then
+         ManageInterface(True)
+      End If
       If command <> Controller.CMD.LINE2P AndAlso command <> Controller.CMD.EXTRUDE Then Return
       ' se finita creazione estrusione
       If m_bIsCreatingExtrusion Then
@@ -705,6 +735,7 @@ Public Class FilledSolidPanelVM
          If NewGeomType = GDB_TY.CRV_COMPO Then
             If Not EgtCurveIsClosed(nNewEntityId) Then
                EgtCloseCurveCompo(nNewEntityId)
+               m_bEscOnLine2P = True
             End If
             EgtSetName(nNewEntityId, RIB_CURVE)
             ' resetto colore entita'
@@ -757,6 +788,13 @@ Public Class FilledSolidPanelVM
             ' rimetto la selezione scena a null
             Map.refSceneHostVM.MainScene.SetStatusNull()
          End If
+         ' se esc su creazione percorso, lo annullo, altrimenti riabilito interfaccia
+         If m_bEscOnLine2P Then
+            m_bEscOnLine2P = False
+         Else
+            If m_bIsCreatingExtrusion Then m_bIsCreatingExtrusion = False
+            ManageInterface(True)
+         End If
       End If
    End Sub
 
@@ -792,6 +830,18 @@ Public Class FilledSolidPanelVM
       Return nFilledSolidIndex + 1
    End Function
 
+   Friend Sub ManageInterface(bValue As Boolean)
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(bValue)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(bValue)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(bValue)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(bValue)
+      Map.refInstrumentPanelVM.SetInstrumentPanelIsEnabled(bValue)
+      SetFilledSolidListIsEnabled(bValue)
+   End Sub
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -815,7 +865,9 @@ Public Class FilledSolidPanelVM
    ''' </summary>
    Public Sub Import(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.InsertFilledSolid()
+      ManageInterface(True)
    End Sub
 
 #End Region ' Import
@@ -839,6 +891,7 @@ Public Class FilledSolidPanelVM
    ''' </summary>
    Public Sub Line2P(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Dim nNewShellNumberLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWRIB)
       If nNewShellNumberLayerId = GDB_ID.NULL Then nNewShellNumberLayerId = EgtCreateGroup(m_nPartId)
       EgtSetName(nNewShellNumberLayerId, LAY_NEWRIB)
@@ -887,6 +940,7 @@ Public Class FilledSolidPanelVM
          End If
          NotifyPropertyChanged(NameOf(SelFilledSolid))
       End If
+      SetFilledSolidListIsEnabled(True)
    End Sub
 
 #End Region    ' Delete
@@ -1171,6 +1225,7 @@ Public Class FilledSolidPanelVM
    ''' </summary>
    Public Sub CPlaneElevation(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ELEVATION)
    End Sub
 
@@ -1195,6 +1250,7 @@ Public Class FilledSolidPanelVM
    ''' </summary>
    Public Sub CPlaneOrigin(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ORIGIN)
    End Sub
 
@@ -1311,6 +1367,7 @@ Public Class FilledSolidPanelVM
    ''' </summary>
    Public Sub CPlaneObj(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       ' salvo selezione precedente e deseleziono altri oggetti
       m_PrevSelObjs.Clear()
       Dim nSelObjId As Integer = EgtGetFirstSelectedObj()

Icarus/FilledSolidParamPanel/FilledSolidParamPanelV.xaml

@@ -84,6 +84,32 @@
                                 Style="{StaticResource ToolBar_SmallButton}"/>
                      </Grid>
                   </DataTemplate>
+                  <DataTemplate DataType="{x:Type PrintApp:CheckMachiningParam}">
+                     <Grid Margin="0,1,2.5,1"
+                           IsEnabled="{Binding bIsActive}">
+                        <Grid.ColumnDefinitions>
+                           <ColumnDefinition Width="2*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="Auto"/>
+                        </Grid.ColumnDefinitions>
+                        <TextBlock Text="{Binding sName}"
+                                   Margin="0,0,2.5,0"
+                                   Style="{StaticResource ParameterList_TextBlock}"/>
+                        <CheckBox Grid.Column="1"
+                                  IsChecked="{Binding bValue}"
+                                  HorizontalAlignment="Center"
+                                  VerticalAlignment="Center"
+                                  Margin="2.5,0,0,0"/>
+                        <Button Grid.Column="2"
+                                Content="R"
+                                Command="{Binding ResetParam_Command}"
+                                IsEnabled="{Binding bIsModifiedFromPart}"
+                                VerticalContentAlignment="Center"
+                                HorizontalContentAlignment="Center"
+                                Margin="2.5,0,0,0"
+                                Style="{StaticResource ToolBar_SmallButton}"/>
+                     </Grid>
+                  </DataTemplate>
                </ItemsControl.Resources>
             </ItemsControl>
          </ScrollViewer>

Icarus/FilledSolidParamPanel/FilledSolidParamPanelVM.vb

@@ -42,12 +42,21 @@ Public Class FilledSolidParamPanelVM
 
       m_Type = Cathegories.AUX_SOLID
       m_sName = "Filled Solid"
-      m_MachiningParamList = New List(Of MachiningParam)({New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nFilledSolidId, nPartId, Me),
+      m_MachiningParamList = New List(Of MachiningParam)({New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDWIDTH, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidCheckMachiningParam(MachiningParam.Params.AUXSOLIDSINFILLLINK, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDCOUNT, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETLEADPOINT, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSDENSITY, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSGRIDOVERLAP, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSDIRECTION, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETX, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETY, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSCOASTINGLEN, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPELEN, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPEDIR, nFilledSolidId, nPartId, Me)})
@@ -190,6 +199,14 @@ Public Class FilledSolidNumericMachiningParam
       MyBase.New(Type, Cathegory)
       Dim bReadFromPart As Boolean = False
       Select Case Type
+         Case Params.AUXSOLIDSSTRANDWIDTH
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDWIDTH, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSSTRANDWIDTH, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDCOUNT, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSSTRANDCOUNT, m_dPartValue)
+            m_bIsLen = False
          Case Params.AUXSOLIDSOVERLAP
             bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSOVERLAP, m_dValue)
             EgtGetInfo(nPartId, MAC_AUXSOLIDSOVERLAP, m_dPartValue)
@@ -202,6 +219,30 @@ Public Class FilledSolidNumericMachiningParam
             bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, m_dValue)
             EgtGetInfo(nPartId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, m_dPartValue)
             m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETLEADPOINT, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETLEADPOINT, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSDENSITY
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSDENSITY, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSDENSITY, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSGRIDOVERLAP, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSGRIDOVERLAP, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSDIRECTION
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSDIRECTION, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSDIRECTION, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETX
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETX, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETX, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETY
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETY, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETY, m_dPartValue)
+            m_bIsLen = True
          Case Params.AUXSOLIDSCOASTINGLEN
             bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSCOASTINGLEN, m_dValue)
             EgtGetInfo(nPartId, MAC_AUXSOLIDSCOASTINGLEN, m_dPartValue)
@@ -230,6 +271,18 @@ Public Class FilledSolidNumericMachiningParam
          sWriteValue = DoubleToString(m_dValue, 2)
       End If
       Select Case Type
+         Case Params.AUXSOLIDSSTRANDWIDTH
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDWIDTH, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDWIDTH)
+            End If
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDCOUNT, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDCOUNT)
+            End If
          Case Params.AUXSOLIDSOVERLAP
             If bIsModifiedFromPart Then
                EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSOVERLAP, sWriteValue)
@@ -248,6 +301,42 @@ Public Class FilledSolidNumericMachiningParam
             Else
                EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE)
             End If
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETLEADPOINT, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETLEADPOINT)
+            End If
+         Case Params.AUXSOLIDSDENSITY
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSDENSITY, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSDENSITY)
+            End If
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSGRIDOVERLAP, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSGRIDOVERLAP)
+            End If
+         Case Params.AUXSOLIDSDIRECTION
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSDIRECTION, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSDIRECTION)
+            End If
+         Case Params.AUXSOLIDSOFFSETX
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETX, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETX)
+            End If
+         Case Params.AUXSOLIDSOFFSETY
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETY, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETY)
+            End If
          Case Params.AUXSOLIDSCOASTINGLEN
             If bIsModifiedFromPart Then
                EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSCOASTINGLEN, sWriteValue)
@@ -339,9 +428,14 @@ Public Class FilledSolidComboMachiningParam
       Dim bReadFromPart As Boolean = False
       Select Case Type
          Case Params.AUXSOLIDSINFILL
-            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL.NONE, "None"),
-                                                     New IdNameStruct(Machining.MPAR_INFILL.OFFSET, "Offset"),
-                                                     New IdNameStruct(Machining.MPAR_INFILL.ZIGZAG, "ZigZag")})
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
             Dim nSelValue As Integer = 1
             bReadFromRib = EgtGetInfo(nRibId, MAC_AUXSOLIDSINFILL, nSelValue)
             If bReadFromRib Then
@@ -379,7 +473,7 @@ Public Class FilledSolidComboMachiningParam
          Else
             Select Case Type
                Case Params.AUXSOLIDSINFILL
-                  m_OrigSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = Machining.MPAR_INFILL.NONE)
+                  m_OrigSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = Machining.MPAR_INFILL_TYPE.NONE)
                   m_SelValue = m_OrigSelValue
                Case Params.AUXSOLIDSSTRANDORDER
                   m_OrigSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = Machining.MPAR_STRANDORDERS.OUTTOIN)
@@ -447,4 +541,95 @@ Public Class FilledSolidComboMachiningParam
 #End Region    ' COMMANDS
 
 
+End Class
+
+Public Class FilledSolidCheckMachiningParam
+   Inherits CheckMachiningParam
+
+   Public Overrides Property bValue As Boolean
+      Get
+         Return m_bValue
+      End Get
+      Set(value As Boolean)
+         m_bValue = value
+         NotifyPropertyChanged(NameOf(bValue))
+         NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+      End Set
+   End Property
+
+   Protected m_bPartValue As Boolean
+   Public ReadOnly Property bPartValue As Boolean
+      Get
+         Return m_bPartValue
+      End Get
+   End Property
+
+   Public ReadOnly Property bIsModifiedFromPart As Boolean
+      Get
+         Return m_bValue <> m_bPartValue
+      End Get
+   End Property
+
+   ' Definizione comandi
+   Private m_cmdResetParam As ICommand
+
+   Sub New(Type As Params, nAuxSolidId As Integer, nPartId As Integer, Cathegory As MachiningCathegory)
+      MyBase.New(Type, Cathegory)
+      Dim bReadFromPart As Boolean = False
+      Select Case Type
+         Case Params.AUXSOLIDSINFILLLINK
+            bReadFromPart = EgtGetInfo(nAuxSolidId, MAC_AUXSOLIDSINFILLLINK, m_bValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSINFILLLINK, m_bPartValue)
+      End Select
+      m_bOrigValue = m_bValue
+      If Not bReadFromPart Then
+         m_bValue = m_bPartValue
+         m_bOrigValue = m_bPartValue
+      End If
+   End Sub
+
+   Friend Sub WriteParamInRib(nAuxSolidId As Integer)
+      Select Case Type
+         Case Params.AUXSOLIDSINFILLLINK
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nAuxSolidId, MAC_AUXSOLIDSINFILLLINK, If(m_bValue, 1, 0))
+            Else
+               EgtRemoveInfo(nAuxSolidId, MAC_AUXSOLIDSINFILLLINK)
+            End If
+      End Select
+   End Sub
+
+   Friend Overrides Sub SaveParam()
+      m_bOrigValue = m_bValue
+   End Sub
+
+   Friend Overrides Sub ResetParam()
+      m_bValue = m_bOrigValue
+      NotifyPropertyChanged(NameOf(bValue))
+   End Sub
+
+#Region "COMMANDS"
+
+#Region "ResetParam"
+
+   Public ReadOnly Property ResetParam_Command As ICommand
+      Get
+         If m_cmdResetParam Is Nothing Then
+            m_cmdResetParam = New Command(AddressOf ResetParamCmd)
+         End If
+         Return m_cmdResetParam
+      End Get
+   End Property
+
+   Public Sub ResetParamCmd()
+      m_bValue = m_bPartValue
+      NotifyPropertyChanged(NameOf(bValue))
+      NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+   End Sub
+
+#End Region    ' ResetParam
+
+#End Region    ' COMMANDS
+
+
 End Class

Icarus/Icarus.vbproj

@@ -150,6 +150,18 @@
       <DependentUpon>DispositionPanelV.xaml</DependentUpon>
     </Compile>
     <Compile Include="DispositionPanel\DispositionPanelVM.vb" />
+    <Compile Include="EgtMessageBox\EgtMessageBoxV.xaml.vb">
+      <DependentUpon>EgtMessageBoxV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="EgtMessageBox\EgtMessageBoxVM.vb" />
+    <Compile Include="EgtColorPicker\EgtColorPickerV.xaml.vb">
+      <DependentUpon>EgtColorPickerV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="EgtColorPicker\EgtColorPickerVM.vb" />
+    <Compile Include="EgtManageFileDialog\EgtManageFileDialogV.xaml.vb">
+      <DependentUpon>EgtManageFileDialogV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="EgtManageFileDialog\EgtManageFileDialogVM.vb" />
     <Compile Include="FilledSolidPanel\FilledSolidPanelV.xaml.vb">
       <DependentUpon>FilledSolidPanelV.xaml</DependentUpon>
     </Compile>
@@ -362,6 +374,18 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="EgtMessageBox\EgtMessageBoxV.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="EgtColorPicker\EgtColorPickerV.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
+    <Page Include="EgtManageFileDialog\EgtManageFileDialogV.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="FilledSolidPanel\FilledSolidPanelV.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -604,6 +628,7 @@
       <LastGenOutput>Settings.Designer.vb</LastGenOutput>
     </None>
     <None Include="packages.config" />
+    <Resource Include="Resources\EgtMessageBox\Error.png" />
     <Resource Include="Resources\Fonts\Roboto-Regular.ttf" />
     <Resource Include="Resources\Fonts\Roboto-Light.ttf" />
   </ItemGroup>
@@ -855,6 +880,23 @@
   <ItemGroup>
     <Resource Include="Resources\RibParamPanel\CopyFrom.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\EgtMessageBox\Information.png" />
+    <Resource Include="Resources\EgtMessageBox\Question.png" />
+    <Resource Include="Resources\EgtMessageBox\Warning.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\EgtDialog\Restore.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\EgtDialog\New.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\EgtDialog\Folder.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\EgtDialog\Root.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\Icarus\IcarusR32.exe

Icarus/ImportExportMachiningPanel/ImportExportMachiningPanelVM.vb

@@ -157,7 +157,8 @@ Public Class ImportExportMachiningPanelVM
                      nIndex += 1
                   End While
                   If bIsOriginal AndAlso bIsCustom Then
-                     MessageBox.Show("Corrupted file! Impossible to import it!")
+                     'MessageBox.Show("Corrupted file! Impossible to import it!")
+                     EgtMessageBoxV.Show(Application.Current.MainWindow, "Corrupted file! Impossible to import it!")
                   ElseIf bIsOriginal Then
                      LoadOriginalMaterial()
                   End If
@@ -301,9 +302,12 @@ Public Class ImportExportMachiningPanelVM
                sDuplicatedMaterialList &= " - " & m_MachiningList(Index).sName & Environment.NewLine
             End If
          Next
-         MessageBox.Show("Impossible to import the package because materials named:" & Environment.NewLine &
-                         sDuplicatedMaterialList & Environment.NewLine &
-                         "Please modify the names of these machining and then retry to import the materials.")
+         'MessageBox.Show("Impossible to import the package because materials named:" & Environment.NewLine &
+         '             sDuplicatedMaterialList & Environment.NewLine &
+         '             "Please modify the names of these machining and then retry to import the materials.")
+         EgtMessageBoxV.Show(Application.Current.MainWindow, "Impossible to import the package because materials named:" & Environment.NewLine &
+                                sDuplicatedMaterialList & Environment.NewLine &
+                                "Please modify the names of these machining and then retry to import the materials.")
          Return
       End If
       ' aggiorno/aggiungo materiali
@@ -353,9 +357,12 @@ Public Class ImportExportMachiningPanelVM
       For Index = 0 To ImportedMaterialList.Count - 1
          sMaterialList &= " - " & m_MachiningList(Index).sName & " (" & If(ImportedMaterialList(Index) = MaterialState.NOTFOUND, "New", "Updated") & ")" & Environment.NewLine
       Next
-      MessageBox.Show("List of the materials:" & Environment.NewLine &
-                      sMaterialList & Environment.NewLine &
-                      "Import successfully completed.")
+      'MessageBox.Show("List of the materials:" & Environment.NewLine &
+      '              sMaterialList & Environment.NewLine &
+      '              "Import successfully completed.")
+      EgtMessageBoxV.Show(Application.Current.MainWindow, "List of the materials:" & Environment.NewLine &
+                    sMaterialList & Environment.NewLine &
+                    "Import successfully completed.")
       Return
    End Sub
 
@@ -471,7 +478,7 @@ Public Class ImportExportMachiningPanelVM
             End Select
          Case WindowModeEnum.EXPORT, WindowModeEnum.EXPORT_ORIG
             ' chiedo il nome con cui salvare il file 
-            Dim sExtension As String =""
+            Dim sExtension As String = ""
             If m_WindowType = WindowTypeEnum.MATERIAL Then
                If m_WindowMode = WindowModeEnum.EXPORT_ORIG Then
                   sExtension = OriginalMaterialDataExtension
@@ -580,7 +587,8 @@ Public Class ImpExpMachiningItem
             If m_AlreadyExist Then
                Select Case m_WindowType
                   Case WindowTypeEnum.MATERIAL
-                     Select Case System.Windows.MessageBox.Show("Material already existing in Db. Overwrite it?", "", MessageBoxButton.YesNoCancel)
+                     Select Case EgtMessageBoxV.Show(Application.Current.MainWindow, "Material will be imported with the name: " & m_sName, "", MessageBoxButton.OK)
+                                'System.Windows.MessageBox.Show("Material already existing in Db. Overwrite it?", "", MessageBoxButton.YesNoCancel)
                         Case MessageBoxResult.Yes
                            m_ChangeName = False
                            m_Active = True
@@ -594,7 +602,8 @@ Public Class ImpExpMachiningItem
                               End While
                            End If
                            m_sName = m_sOrigName & IMPEXPNAME & If(nImpNameIndex > 0, "_" & nImpNameIndex, "")
-                           System.Windows.MessageBox.Show("Material will be imported with the name: " & m_sName, "", MessageBoxButton.OK)
+                           'System.Windows.MessageBox.Show("Material will be imported with the name: " & m_sName, "", MessageBoxButton.OK)
+                           EgtMessageBoxV.Show(Application.Current.MainWindow, "Material will be imported with the name: " & m_sName, "", MessageBoxButton.OK)
                            NotifyPropertyChanged(NameOf(sName))
                            m_ChangeName = True
                            m_Active = True
@@ -602,7 +611,8 @@ Public Class ImpExpMachiningItem
                            m_Active = False
                      End Select
                   Case WindowTypeEnum.MACHINING
-                     Select Case System.Windows.MessageBox.Show("Machining already existing in Db. Overwrite it?", "", MessageBoxButton.YesNoCancel)
+                     Select Case EgtMessageBoxV.Show(Application.Current.MainWindow, "Machining already existing in Db. Overwrite it?", "", MessageBoxButton.YesNoCancel)
+                                'System.Windows.MessageBox.Show("Machining already existing in Db. Overwrite it?", "", MessageBoxButton.YesNoCancel)
                         Case MessageBoxResult.Yes
                            m_ChangeName = False
                            m_Active = True
@@ -616,7 +626,8 @@ Public Class ImpExpMachiningItem
                               End While
                            End If
                            m_sName = m_sOrigName & IMPEXPNAME & If(nImpNameIndex > 0, "_" & nImpNameIndex, "")
-                           System.Windows.MessageBox.Show("Machining will be imported with the name: " & m_sName, "", MessageBoxButton.OK)
+                           'System.Windows.MessageBox.Show("Machining will be imported with the name: " & m_sName, "", MessageBoxButton.OK)
+                           EgtMessageBoxV.Show(Application.Current.MainWindow, "Machining will be imported with the name: " & m_sName, "", MessageBoxButton.OK)
                            NotifyPropertyChanged(NameOf(sName))
                            m_ChangeName = True
                            m_Active = True

Icarus/InstrumentPanel/InstrumentPanelV.xaml

@@ -3,6 +3,7 @@
             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
             xmlns:sys="clr-namespace:System;assembly=mscorlib"
             xmlns:local="clr-namespace:Icarus"
+            IsEnabled="{Binding InstrumentPanel_IsEnabled}"
             Orientation="Horizontal">
 
    <local:CheckedImageToggleButton ToolTip="{Binding GetDist_ToolTip}"

Icarus/InstrumentPanel/MyInstrumentPanelVM.vb

@@ -96,8 +96,9 @@ Public Class MyInstrumentPanelVM
             EgtDraw()
             ' Ripristino stato segnalazione modifica
             DisableMgr.ReEnable()
-            MessageBox.Show(sResult)
-         Else
+            'MessageBox.Show(sResult)
+            EgtMessageBoxV.Show(Application.Current.MainWindow, sResult)
+            Else
             ' Disabilito segnalazione modificato
             Dim DisableMgr As New DisableModifiedMgr
             ' cancello tutti i gruppi con i chunk

Icarus/MachSaveInDbWnd/MachSaveInDbWndVM.vb

@@ -48,7 +48,8 @@ Public Class MachSaveInDbWndVM
 
    Public Sub Ok()
       If Map.refTopPanelVM.MachiningList.Any(Function(x As MachiningIndex) x.sName = m_sName) Then
-         MessageBox.Show("Name already used in Db! Please insert a different name.", "Warning", MessageBoxButton.OK, MessageBoxImage.Warning)
+         'MessageBox.Show("Name already used in Db! Please insert a different name.", "Warning", MessageBoxButton.OK, MessageBoxImage.Warning)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, "Name already used in Db! Please insert a different name.", "Warning", MessageBoxButton.OK, MessageBoxImage.Warning)
          Return
       End If
       RaiseEvent m_CloseWindow(True)

Icarus/MachiningDb/Machining.vb

@@ -45,12 +45,6 @@ Public Class Machining
       SUPPORT = 4
    End Enum
 
-   Public Enum MPAR_INFILL As Integer
-      NONE = 1
-      OFFSET = 2
-      ZIGZAG = 3
-   End Enum
-
    Public Enum MPAR_DYNAMIC_MODE As Integer
       STANDARD = 1
       FAST = 2
@@ -67,6 +61,17 @@ Public Class Machining
       RIB_SUPPORT = 8
    End Enum
 
+   Public Enum MPAR_INFILL_TYPE As Integer
+      NONE = 0
+      OFFSET = 16
+      ZIGZAG = 17
+      LINES = 32
+      GRID = 33
+      ZIGZAG_GRID = 34
+      HONEYCOMB = 35
+      HONEYCOMB_GRID = 36
+   End Enum
+
    Protected m_CathegoryList As New ObservableCollection(Of MachiningCathegory)
    Public ReadOnly Property CathegoryList As ObservableCollection(Of MachiningCathegory)
       Get
@@ -147,6 +152,7 @@ Public Class Machining
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.RIBS, nIndex))
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.SHELL_NUMBER, nIndex))
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.AUX_SOLID, nIndex))
+      m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.INFILL, nIndex))
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.MATERIALS, nIndex))
       For Each Cathegory In m_CathegoryList
          For Each MachiningParam In Cathegory.MachiningParamList
@@ -273,7 +279,8 @@ Public Class MachiningCathegory
       RIBS = 8
       SHELL_NUMBER = 9
       AUX_SOLID = 10
-      MATERIALS = 11
+      INFILL = 11
+      MATERIALS = 12
    End Enum
 
    Protected m_Type As Cathegories
@@ -326,7 +333,6 @@ Public Class MachiningCathegory
                                                                 New NumericMachiningParam(MachiningParam.Params.STARTPOINTOFFSETONSLICE, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.STRANDORDER, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.DIRECTION, nIndex, Me),
-                                                                New NumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.G0FEED, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.G0FEEDZ, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.LINKZUP, nIndex, Me),
@@ -336,10 +342,12 @@ Public Class MachiningCathegory
                                                                 New OrderedMachiningParam(MachiningParam.Params.PRINT_ORDER, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.PREFLOWDELAY, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.POSTFLOWDELAY, nIndex, Me),
-                                                                New NumericMachiningParam(MachiningParam.Params.SCREWBACK, nIndex, Me)})
+                                                                New NumericMachiningParam(MachiningParam.Params.SCREWBACK, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.SLICINGHEIGHT, nIndex, Me)})
          Case Cathegories.LINK
             m_sName = "Shell"
-            m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.OFFSETLEADPOINT, nIndex, Me),
+            m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.INNERSHELLWIDTH, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.OFFSETLEADPOINT, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.LINKTYPE, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.LINKPARAM, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.LEADIN, nIndex, Me),
@@ -355,7 +363,8 @@ Public Class MachiningCathegory
                                                                 'New NumericMachiningParam(MachiningParam.Params.WIPEDIR, nIndex, Me)})
          Case Cathegories.RIBS
             m_sName = "Ribs"
-            m_MachiningParamList = New List(Of MachiningParam)({New ComboMachiningParam(MachiningParam.Params.RIBSTYPE, nIndex, Me),
+            m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.RIBSSTRANDWIDTH, nIndex, Me),
+                                                                New ComboMachiningParam(MachiningParam.Params.RIBSTYPE, nIndex, Me),
                                                                 New CheckMachiningParam(MachiningParam.Params.RIBSLIMITUNBOUNDEDWITHSOLID, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.RIBSSTRANDCOUNT, nIndex, Me),
@@ -378,15 +387,42 @@ Public Class MachiningCathegory
                                                                 New NumericMachiningParam(MachiningParam.Params.SHELLNBRWIPEDIR, nIndex, Me)})
          Case Cathegories.AUX_SOLID
             m_sName = "Filled Solid"
-            m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nIndex, Me),
+            m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDWIDTH, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nIndex, Me),
+                                                                New CheckMachiningParam(MachiningParam.Params.AUXSOLIDSINFILLLINK, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDCOUNT, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETLEADPOINT, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSDENSITY, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSGRIDOVERLAP, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSDIRECTION, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETX, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETY, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSCOASTINGLEN, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPELEN, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPEDIR, nIndex, Me)})
+         Case Cathegories.INFILL
+            m_sName = "Infill"
+            m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.INFILLSTRANDWIDTH, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nIndex, Me),
+                                                                New ComboMachiningParam(MachiningParam.Params.FLOORTYPE, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.CEILCOUNT, nIndex, Me),
+                                                                New ComboMachiningParam(MachiningParam.Params.CEILTYPE, nIndex, Me),
+                                                                New ComboMachiningParam(MachiningParam.Params.INFILLTYPE, nIndex, Me),
+                                                                New CheckMachiningParam(MachiningParam.Params.INFILLLINK, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLDENSITY, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLGRIDOVERLAP, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLDIRECTION, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLOFFSETX, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLOFFSETY, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLOVERLAP, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLCOASTING, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLWIPE, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLWIPEDIR, nIndex, Me)})
          Case Cathegories.MATERIALS
             m_sName = "Materials"
             Dim sMaterials As String = ""
@@ -414,6 +450,19 @@ Public Class MachiningCathegory
                Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
                MachiningParam.ManageDependencyParam()
             Next
+            For Each Param In {MachiningParam.Params.AUXSOLIDSSTRANDCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
+         Case Cathegories.INFILL
+            For Each Param In {MachiningParam.Params.FLOORCOUNT, MachiningParam.Params.CEILCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
+            For Each Param In {MachiningParam.Params.INFILLTYPE}
+               Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
       End Select
    End Sub
 
@@ -443,6 +492,11 @@ End Class
 Public MustInherit Class MachiningParam
    Inherits VMBase
 
+   Public Enum MinMaxTypes As Integer
+      ABSOLUT = 1
+      PERCENTAGE = 2
+   End Enum
+
    Public Enum Params As Integer
       SLICINGTYPE = 1
       SPIRALVASE = 2
@@ -454,7 +508,6 @@ Public MustInherit Class MachiningParam
       STARTPOINTOFFSETONSLICE = 8
       STRANDORDER = 9
       DIRECTION = 10
-      FLOORCOUNT = 11
       G0FEED = 12
       LINKZUP = 13
       G0FEEDZ = 14
@@ -465,6 +518,7 @@ Public MustInherit Class MachiningParam
       PREFLOWDELAY = 19
       POSTFLOWDELAY = 20
       SCREWBACK = 21
+      SLICINGHEIGHT = 22
       LINKTYPE = 51
       LINKPARAM = 52
       LEADIN = 53
@@ -478,6 +532,7 @@ Public MustInherit Class MachiningParam
       COASTINGFEED_PC = 61
       WIPELEN = 62
       WIPEFEED_PC = 63
+      INNERSHELLWIDTH = 64
       'WIPEDIR = 64
       RIBSTYPE = 101
       RIBSOVERLAP = 102
@@ -494,6 +549,7 @@ Public MustInherit Class MachiningParam
       RIBSLEADOUTWIPE = 113
       RIBSLEADOUTWIPEDIR = 114
       RIBSLIMITUNBOUNDEDWITHSOLID = 115
+      RIBSSTRANDWIDTH = 116
       SHELLNBRDIFFERENCE = 151
       SHELLNBRCOASTING = 152
       SHELLNBRWIPE = 153
@@ -504,10 +560,35 @@ Public MustInherit Class MachiningParam
       AUXSOLIDSLINKTYPE = 204
       AUXSOLIDSLINKPARAM = 205
       AUXSOLIDSSTARTPOINTOFFSETONSLICE = 206
-      AUXSOLIDSCOASTINGLEN = 207
-      AUXSOLIDSWIPELEN = 208
-      AUXSOLIDSWIPEDIR = 209
-      MATERIALS = 250
+      AUXSOLIDSOFFSETLEADPOINT = 207
+      AUXSOLIDSDENSITY = 208
+      AUXSOLIDSGRIDOVERLAP = 209
+      AUXSOLIDSDIRECTION = 210
+      AUXSOLIDSOFFSETX = 211
+      AUXSOLIDSOFFSETY = 212
+      AUXSOLIDSCOASTINGLEN = 213
+      AUXSOLIDSWIPELEN = 214
+      AUXSOLIDSWIPEDIR = 215
+      AUXSOLIDSSTRANDCOUNT = 216
+      AUXSOLIDSINFILLLINK = 217
+      AUXSOLIDSSTRANDWIDTH = 218
+      FLOORCOUNT = 250
+      FLOORTYPE = 251
+      CEILCOUNT = 252
+      CEILTYPE = 253
+      INFILLTYPE = 254
+      INFILLLINK = 255
+      INFILLDENSITY = 256
+      INFILLOVERLAP = 257
+      INFILLGRIDOVERLAP = 258
+      INFILLDIRECTION = 259
+      INFILLOFFSETX = 260
+      INFILLOFFSETY = 261
+      INFILLCOASTING = 262
+      INFILLWIPE = 263
+      INFILLWIPEDIR = 264
+      INFILLSTRANDWIDTH = 265
+      Materials = 500
    End Enum
 
    Protected m_Type As Params
@@ -533,12 +614,29 @@ Public MustInherit Class MachiningParam
       End Get
    End Property
 
+   Public ReadOnly Property bIsBeta As Boolean
+      Get
+         Select Case m_Type
+            Case Params.FLOORCOUNT, Params.FLOORTYPE, Params.CEILCOUNT, Params.CEILTYPE, Params.INFILLTYPE
+               Return True
+            Case Else
+               Return False
+         End Select
+      End Get
+   End Property
+
+   Public ReadOnly Property IsBeta_Visibility As Visibility
+      Get
+         Return If(bIsBeta, Visibility.Visible, Visibility.Collapsed)
+      End Get
+   End Property
+
    Sub New(Type As Params, Cathegory As MachiningCathegory)
       m_Type = Type
       m_Cathegory = Cathegory
       Select Case m_Type
          Case Params.SLICINGTYPE
-            m_sName = "Slicing direction"
+            m_sName = "Slicing Direction"
          Case Params.STRANDH
             m_sName = "Strand Height"
          Case Params.STRANDW
@@ -559,6 +657,8 @@ Public MustInherit Class MachiningParam
             m_sName = "Link Param"
          Case Params.LINKZUP
             m_sName = "Link Z Up"
+         Case Params.INNERSHELLWIDTH
+            m_sName = "Custom Inner Shell Width"
          Case Params.OFFSETLEADPOINT
             m_sName = "Offset Lead Point"
          Case Params.LEADIN
@@ -595,6 +695,10 @@ Public MustInherit Class MachiningParam
             m_sName = "Post Flow Delay"
          Case Params.SCREWBACK
             m_sName = "Screw Back"
+         Case Params.SLICINGHEIGHT
+            m_sName = "Slicing Height"
+         Case Params.RIBSSTRANDWIDTH
+            m_sName = "Custom Strand Width"
          Case Params.RIBSTYPE
             m_sName = "Type"
          Case Params.RIBSOVERLAP
@@ -633,10 +737,16 @@ Public MustInherit Class MachiningParam
             m_sName = "Wipe"
          Case Params.SHELLNBRWIPEDIR
             m_sName = "Wipe Direction [deg]"
+         Case Params.AUXSOLIDSSTRANDWIDTH
+            m_sName = "Custom Strand Width"
          Case Params.AUXSOLIDSOVERLAP
             m_sName = "Overlap [%]"
          Case Params.AUXSOLIDSINFILL
             m_sName = "Infill"
+         Case Params.AUXSOLIDSINFILLLINK
+            m_sName = "Infill Link"
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            m_sName = "Strand Count"
          Case Params.AUXSOLIDSSTRANDORDER
             m_sName = "Strand Order"
          Case Params.AUXSOLIDSLINKTYPE
@@ -645,6 +755,18 @@ Public MustInherit Class MachiningParam
             m_sName = "Link Parameter"
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             m_sName = "Start Point Offset On Slice"
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            m_sName = "Offset Lead Point"
+         Case Params.AUXSOLIDSDENSITY
+            m_sName = "Density [%]"
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            m_sName = "Grid Overlap [%]"
+         Case Params.AUXSOLIDSDIRECTION
+            m_sName = "Direction"
+         Case Params.AUXSOLIDSOFFSETX
+            m_sName = "Offset X"
+         Case Params.AUXSOLIDSOFFSETY
+            m_sName = "Offset Y"
          Case Params.AUXSOLIDSCOASTINGLEN
             m_sName = "Coasting Length"
          Case Params.AUXSOLIDSWIPELEN
@@ -658,11 +780,41 @@ Public MustInherit Class MachiningParam
          Case Params.STRANDOVERLAP
             m_sName = "Strand Overlap [%]"
          Case Params.FLOWRATE_PC
-            m_sName = "Flow rate [%]"
+            m_sName = "Flow Rate [%]"
          Case Params.DYNAMIC_MODE
             m_sName = "Dynamic Mode"
          Case Params.PRINT_ORDER
             m_sName = "Print Order"
+         Case Params.INFILLSTRANDWIDTH
+            m_sName = "Custom Strand Width"
+         Case Params.FLOORTYPE
+            m_sName = "Floor Type"
+         Case Params.CEILCOUNT
+            m_sName = "Ceil Count"
+         Case Params.CEILTYPE
+            m_sName = "Ceil Type"
+         Case Params.INFILLTYPE
+            m_sName = "Infill Type"
+         Case Params.INFILLLINK
+            m_sName = "Link"
+         Case Params.INFILLDENSITY
+            m_sName = "Density [%]"
+         Case Params.INFILLOVERLAP
+            m_sName = "Overlap [%]"
+         Case Params.INFILLGRIDOVERLAP
+            m_sName = "Grid Overlap [%]"
+         Case Params.INFILLDIRECTION
+            m_sName = "Direction"
+         Case Params.INFILLOFFSETX
+            m_sName = "Offset X"
+         Case Params.INFILLOFFSETY
+            m_sName = "Offset Y"
+         Case Params.INFILLCOASTING
+            m_sName = "Coasting"
+         Case Params.INFILLWIPE
+            m_sName = "Wipe"
+         Case Params.INFILLWIPEDIR
+            m_sName = "Wipe Direction"
       End Select
    End Sub
 
@@ -686,6 +838,8 @@ Public Class NumericMachiningParam
    Protected m_bIsLen As Boolean = False
 
    Protected m_bIsActiveMinMax As Boolean = False
+   Protected m_MinMaxLinkedParam As Params = 0
+   Protected m_MinMaxType As MinMaxTypes = 0
    Protected m_dMinValue As Double
    Protected m_dMaxValue As Double
 
@@ -707,13 +861,31 @@ Public Class NumericMachiningParam
             StringToDouble(value, dTempValue)
          End If
          If m_bIsActiveMinMax Then
-            If dTempValue >= m_dMinValue AndAlso dTempValue <= m_dMaxValue Then
-               m_dValue = dTempValue
+            If m_MinMaxType = MinMaxTypes.ABSOLUT Then
+               If dTempValue >= m_dMinValue AndAlso dTempValue <= m_dMaxValue Then
+                  m_dValue = dTempValue
+               End If
+            ElseIf m_MinMaxType = MinMaxTypes.PERCENTAGE Then
+               Dim LinkedParam As MachiningParam = Nothing
+               ' cerco il parametro a cui e' collegato
+               For Each CurrCathegory In Map.refMachiningDbVM.SelMachining.CathegoryList
+                  LinkedParam = CurrCathegory.MachiningParamList.FirstOrDefault(Function(x) x.Type = m_MinMaxLinkedParam)
+                  If Not IsNothing(LinkedParam) Then Exit For
+               Next
+               If Not IsNothing(LinkedParam) AndAlso TypeOf LinkedParam Is NumericMachiningParam Then
+                  Dim NumericLinkedParam As NumericMachiningParam = DirectCast(LinkedParam, NumericMachiningParam)
+                  If dTempValue >= NumericLinkedParam.dValue * m_dMinValue / 100 AndAlso dTempValue <= NumericLinkedParam.dValue * m_dMaxValue / 100 Then
+                     m_dValue = dTempValue
+                  End If
+               Else
+                  m_dValue = dTempValue
+               End If
             End If
          Else
             m_dValue = dTempValue
          End If
          NotifyPropertyChanged(NameOf(sValue))
+         ManageDependencyParam()
       End Set
    End Property
 
@@ -753,12 +925,39 @@ Public Class NumericMachiningParam
          Dim sMinMaxValues() As String = sMinMax.Split(","c)
          Dim dMin As Double = 0
          Dim dMax As Double = 0
-         If StringToDouble(sMinMaxValues(0), dMin) AndAlso StringToDouble(sMinMaxValues(1), dMax) Then
-            m_dMinValue = dMin
-            m_dMaxValue = dMax
-            m_bIsActiveMinMax = True
+         If sMinMaxValues.Count() = 2 Then
+            If StringToDouble(sMinMaxValues(0), dMin) AndAlso StringToDouble(sMinMaxValues(1), dMax) Then
+               m_MinMaxType = MinMaxTypes.ABSOLUT
+               m_dMinValue = dMin
+               m_dMaxValue = dMax
+               m_bIsActiveMinMax = True
+            End If
+         ElseIf sMinMaxValues.Count() > 2 Then
+            Dim nMinMaxType As Integer = 0
+            If StringToDouble(sMinMaxValues(0), nMinMaxType) AndAlso nMinMaxType = 1 Then
+               If StringToDouble(sMinMaxValues(0), dMin) AndAlso StringToDouble(sMinMaxValues(1), dMax) Then
+                  m_MinMaxType = nMinMaxType
+                  m_dMinValue = dMin
+                  m_dMaxValue = dMax
+                  m_bIsActiveMinMax = True
+               End If
+            ElseIf StringToDouble(sMinMaxValues(0), nMinMaxType) AndAlso nMinMaxType = 2 Then
+               Dim nMinMaxLinkedParam As Integer = 0
+               If sMinMaxValues.Count() >= 4 AndAlso Integer.TryParse(sMinMaxValues(1), nMinMaxLinkedParam) AndAlso StringToDouble(sMinMaxValues(2), dMin) AndAlso StringToDouble(sMinMaxValues(3), dMax) Then
+                  m_MinMaxLinkedParam = nMinMaxLinkedParam
+                  m_MinMaxType = nMinMaxType
+                  m_dMinValue = dMin
+                  m_dMaxValue = dMax
+                  m_bIsActiveMinMax = True
+               End If
+            End If
          End If
       End If
+      If Type = Params.SLICINGHEIGHT Then
+         m_dMinValue = 0
+         m_dMaxValue = CurrentMachine.dSlicingMaxHeight
+         m_bIsActiveMinMax = True
+      End If
       ' leggo parametri da Db
       If nIndex = 0 Then
          m_dValue = 0
@@ -789,6 +988,9 @@ Public Class NumericMachiningParam
             Case Params.LINKZUP
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_LINKZUP, 0)
                m_bIsLen = True
+            Case Params.INNERSHELLWIDTH
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INNERSHELLWIDTH, 0)
+               m_bIsLen = True
             Case Params.OFFSETLEADPOINT
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_OFFSETLEADPOINT, 0)
                m_bIsLen = True
@@ -838,8 +1040,14 @@ Public Class NumericMachiningParam
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_POSTFLOWDELAY, 0)
                m_bIsLen = False
             Case Params.SCREWBACK
-               m_dValue = ReadMachiningParamDouble(nIndex, MAC_SCREWBACK, 0)
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_SCREWBACK, 45)
                m_bIsLen = False
+            Case Params.SLICINGHEIGHT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_SLICINGHEIGHT, CurrentMachine.dSlicingMaxHeight)
+               m_bIsLen = False
+            Case Params.RIBSSTRANDWIDTH
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_RIBSSTRANDWIDTH, 0)
+               m_bIsLen = True
             Case Params.RIBSOVERLAP
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_RIBSOVERLAP, 0)
                m_bIsLen = False
@@ -873,6 +1081,12 @@ Public Class NumericMachiningParam
             Case Params.SHELLNBRWIPEDIR
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_SHELLNBRWIPEDIR, 0)
                m_bIsLen = False
+            Case Params.AUXSOLIDSSTRANDWIDTH
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTRANDWIDTH, 0)
+               m_bIsLen = True
+            Case Params.AUXSOLIDSSTRANDCOUNT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTRANDCOUNT, 0)
+               m_bIsLen = False
             Case Params.AUXSOLIDSOVERLAP
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSOVERLAP, 0)
                m_bIsLen = False
@@ -882,6 +1096,24 @@ Public Class NumericMachiningParam
             Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, 0)
                m_bIsLen = True
+            Case Params.AUXSOLIDSOFFSETLEADPOINT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSOFFSETLEADPOINT, 0)
+               m_bIsLen = True
+            Case Params.AUXSOLIDSDENSITY
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSDENSITY, 0)
+               m_bIsLen = False
+            Case Params.AUXSOLIDSGRIDOVERLAP
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSGRIDOVERLAP, 0)
+               m_bIsLen = True
+            Case Params.AUXSOLIDSDIRECTION
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSDIRECTION, 0)
+               m_bIsLen = False
+            Case Params.AUXSOLIDSOFFSETX
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSOFFSETX, 0)
+               m_bIsLen = True
+            Case Params.AUXSOLIDSOFFSETY
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSOFFSETY, 0)
+               m_bIsLen = True
             Case Params.AUXSOLIDSCOASTINGLEN
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSCOASTINGLEN, 0)
                m_bIsLen = True
@@ -894,11 +1126,68 @@ Public Class NumericMachiningParam
             Case Params.FLOWRATE_PC
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_CONSTANT, 100)
                m_bIsLen = False
+            Case Params.INFILLSTRANDWIDTH
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLSTRANDWIDTH, 0)
+               m_bIsLen = True
+            Case Params.CEILCOUNT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_CEILCOUNT, 0)
+               m_bIsLen = False
+            Case Params.INFILLDENSITY
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLDENSITY, 0)
+               m_bIsLen = False
+            Case Params.INFILLOVERLAP
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLOVERLAP, 0)
+               m_bIsLen = False
+            Case Params.INFILLGRIDOVERLAP
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLGRIDOVERLAP, 0)
+               m_bIsLen = False
+            Case Params.INFILLDIRECTION
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLDIRECTION, 0)
+               m_bIsLen = False
+            Case Params.INFILLOFFSETX
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLOFFSETX, 0)
+               m_bIsLen = True
+            Case Params.INFILLOFFSETY
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLOFFSETY, 0)
+               m_bIsLen = True
+            Case Params.INFILLCOASTING
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLCOASTING, 0)
+               m_bIsLen = True
+            Case Params.INFILLWIPE
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLWIPE, 0)
+               m_bIsLen = True
+            Case Params.INFILLWIPEDIR
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLWIPEDIR, 0)
+               m_bIsLen = False
          End Select
       End If
       m_dOrigValue = m_dValue
    End Sub
 
+   Friend Sub ManageDependencyParam()
+      ' gestisco dis/attivazione parametri dipendenti
+      Select Case m_Type
+         Case Params.FLOORCOUNT
+            Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.FLOORTYPE)
+            ComboMachiningParam.SetIsActive(m_dValue <> 0)
+         Case Params.CEILCOUNT
+            Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.CEILTYPE)
+            ComboMachiningParam.SetIsActive(m_dValue <> 0)
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            Dim AuxSolidsInfillParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSINFILL)
+            Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTRANDORDER)
+            ComboMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKTYPE)
+            ComboMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            Dim NumericMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKPARAM)
+            NumericMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE)
+            NumericMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETLEADPOINT)
+            NumericMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+      End Select
+   End Sub
+
    Friend Overrides Sub WriteParamOnDb(nIndex As Integer, Optional sFilePath As String = "")
       Dim sWriteValue As String = ""
       If m_bIsLen Then
@@ -923,6 +1212,8 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_LINKPARAM, sWriteValue, sFilePath)
          Case Params.LINKZUP
             WriteMachiningParam(nIndex, MAC_LINKZUP, sWriteValue, sFilePath)
+         Case Params.INNERSHELLWIDTH
+            WriteMachiningParam(nIndex, MAC_INNERSHELLWIDTH, sWriteValue, sFilePath)
          Case Params.OFFSETLEADPOINT
             WriteMachiningParam(nIndex, MAC_OFFSETLEADPOINT, sWriteValue, sFilePath)
          Case Params.LEADINTANGDIST
@@ -957,6 +1248,10 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_POSTFLOWDELAY, sWriteValue, sFilePath)
          Case Params.SCREWBACK
             WriteMachiningParam(nIndex, MAC_SCREWBACK, sWriteValue, sFilePath)
+         Case Params.SLICINGHEIGHT
+            WriteMachiningParam(nIndex, MAC_SLICINGHEIGHT, sWriteValue, sFilePath)
+         Case Params.RIBSSTRANDWIDTH
+            WriteMachiningParam(nIndex, MAC_RIBSSTRANDWIDTH, sWriteValue, sFilePath)
          Case Params.RIBSOVERLAP
             WriteMachiningParam(nIndex, MAC_RIBSOVERLAP, sWriteValue, sFilePath)
          Case Params.RIBSSTRANDCOUNT
@@ -979,12 +1274,28 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_SHELLNBRWIPE, sWriteValue, sFilePath)
          Case Params.SHELLNBRWIPEDIR
             WriteMachiningParam(nIndex, MAC_SHELLNBRWIPEDIR, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSSTRANDWIDTH
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSSTRANDWIDTH, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSSTRANDCOUNT, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSOVERLAP
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSOVERLAP, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSLINKPARAM
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSLINKPARAM, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSOFFSETLEADPOINT, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSDENSITY
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSDENSITY, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSGRIDOVERLAP, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSDIRECTION
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSDIRECTION, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSOFFSETX
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSOFFSETX, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSOFFSETY
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSOFFSETY, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSCOASTINGLEN
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSCOASTINGLEN, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSWIPELEN
@@ -993,6 +1304,28 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSWIPEDIR, sWriteValue, sFilePath)
          Case Params.FLOWRATE_PC
             WriteMachiningParam(nIndex, MAC_CONSTANT, sWriteValue, sFilePath)
+         Case Params.INFILLSTRANDWIDTH
+            WriteMachiningParam(nIndex, MAC_INFILLSTRANDWIDTH, sWriteValue, sFilePath)
+         Case Params.CEILCOUNT
+            WriteMachiningParam(nIndex, MAC_CEILCOUNT, sWriteValue, sFilePath)
+         Case Params.INFILLDENSITY
+            WriteMachiningParam(nIndex, MAC_INFILLDENSITY, sWriteValue, sFilePath)
+         Case Params.INFILLOVERLAP
+            WriteMachiningParam(nIndex, MAC_INFILLOVERLAP, sWriteValue, sFilePath)
+         Case Params.INFILLGRIDOVERLAP
+            WriteMachiningParam(nIndex, MAC_INFILLGRIDOVERLAP, sWriteValue, sFilePath)
+         Case Params.INFILLDIRECTION
+            WriteMachiningParam(nIndex, MAC_INFILLDIRECTION, sWriteValue, sFilePath)
+         Case Params.INFILLOFFSETX
+            WriteMachiningParam(nIndex, MAC_INFILLOFFSETX, sWriteValue, sFilePath)
+         Case Params.INFILLOFFSETY
+            WriteMachiningParam(nIndex, MAC_INFILLOFFSETY, sWriteValue, sFilePath)
+         Case Params.INFILLCOASTING
+            WriteMachiningParam(nIndex, MAC_INFILLCOASTING, sWriteValue, sFilePath)
+         Case Params.INFILLWIPE
+            WriteMachiningParam(nIndex, MAC_INFILLWIPE, sWriteValue, sFilePath)
+         Case Params.INFILLWIPEDIR
+            WriteMachiningParam(nIndex, MAC_INFILLWIPEDIR, sWriteValue, sFilePath)
       End Select
    End Sub
 
@@ -1137,50 +1470,71 @@ Public Class ComboMachiningParam
             Case Params.STRANDORDER
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_STRANDORDERS.OUTTOIN, "From Outside To Inside"),
                                                         New IdNameStruct(Machining.MPAR_STRANDORDERS.INTOOUT, "From Inside To Outside")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_STRANDORDER, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_STRANDORDER, Machining.MPAR_STRANDORDERS.OUTTOIN))
             Case Params.DIRECTION
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_DIRECTIONS.CCW, "Counterclockwise"),
                                                         New IdNameStruct(Machining.MPAR_DIRECTIONS.CW, "Clockwise")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_DIRECTION, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_DIRECTION, Machining.MPAR_DIRECTIONS.CCW))
             Case Params.LINKTYPE
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_LINKTYPES.NONE, "None"),
                                                         New IdNameStruct(Machining.MPAR_LINKTYPES.LINEAR, "Linear"),
                                                         New IdNameStruct(Machining.MPAR_LINKTYPES.BIARC, "Biarc")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LINKTYPE, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LINKTYPE, Machining.MPAR_LEADINOUT.NONE))
             Case Params.LEADIN
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_LEADINOUT.NONE, "None"),
                                                         New IdNameStruct(Machining.MPAR_LEADINOUT.LINEAR, "Linear"),
                                                         New IdNameStruct(Machining.MPAR_LEADINOUT.ARC, "Arc")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADIN, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADIN, Machining.MPAR_LEADINOUT.NONE))
             Case Params.LEADOUT
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_LEADINOUT.NONE, "None"),
                                                         New IdNameStruct(Machining.MPAR_LEADINOUT.LINEAR, "Linear"),
                                                         New IdNameStruct(Machining.MPAR_LEADINOUT.ARC, "Arc")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADOUT, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADOUT, Machining.MPAR_LEADINOUT.NONE))
             Case Params.RIBSTYPE
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_RIBSTYPE.INTERNAL, "Internal"),
                                                         New IdNameStruct(Machining.MPAR_RIBSTYPE.EXTERNAL, "External"),
                                                         New IdNameStruct(Machining.MPAR_RIBSTYPE.UNBOUNDED, "Unbounded"),
                                                         New IdNameStruct(Machining.MPAR_RIBSTYPE.SUPPORT, "Support")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_RIBSTYPE, 1))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_RIBSTYPE, Machining.MPAR_RIBSTYPE.INTERNAL))
             Case Params.AUXSOLIDSINFILL
-               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL.NONE, "None"),
-                                                        New IdNameStruct(Machining.MPAR_INFILL.OFFSET, "Offset"),
-                                                        New IdNameStruct(Machining.MPAR_INFILL.ZIGZAG, "ZigZag")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSINFILL, 0))
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSINFILL, Machining.MPAR_INFILL_TYPE.NONE))
             Case Params.AUXSOLIDSSTRANDORDER
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_STRANDORDERS.OUTTOIN, "From Outside To Inside"),
                                                         New IdNameStruct(Machining.MPAR_STRANDORDERS.INTOOUT, "From Inside To Outside")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTRANDORDER, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTRANDORDER, Machining.MPAR_STRANDORDERS.OUTTOIN))
             Case Params.AUXSOLIDSLINKTYPE
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_LINKTYPES.NONE, "None"),
                                                         New IdNameStruct(Machining.MPAR_LINKTYPES.LINEAR, "Linear"),
                                                         New IdNameStruct(Machining.MPAR_LINKTYPES.BIARC, "Biarc")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSLINKTYPE, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSLINKTYPE, Machining.MPAR_LINKTYPES.NONE))
             Case Params.DYNAMIC_MODE
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_DYNAMIC_MODE.STANDARD, "Standard"),
                                                         New IdNameStruct(Machining.MPAR_DYNAMIC_MODE.FAST, "Fast")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_DYNAMICMODE, 1))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_DYNAMICMODE, Machining.MPAR_DYNAMIC_MODE.STANDARD))
+            Case Params.FLOORTYPE
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_FLOORTYPE, Machining.MPAR_INFILL_TYPE.OFFSET))
+            Case Params.CEILTYPE
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_CEILTYPE, Machining.MPAR_INFILL_TYPE.OFFSET))
+            Case Params.INFILLTYPE
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_INFILLTYPE, Machining.MPAR_INFILL_TYPE.NONE))
          End Select
       End If
       m_OrigSelValue = m_SelValue
@@ -1206,12 +1560,43 @@ Public Class ComboMachiningParam
             Dim CheckMachiningParam As CheckMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.RIBSLIMITUNBOUNDEDWITHSOLID)
             CheckMachiningParam.SetIsActive(m_SelValue.Id = MPAR_RIBSTYPE.UNBOUNDED)
          Case Params.AUXSOLIDSINFILL
+            Dim AuxSolidsStrandCountParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTRANDCOUNT)
             Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTRANDORDER)
-            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL.OFFSET)
+            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
             ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKTYPE)
-            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL.OFFSET)
+            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
             Dim NumMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKPARAM)
-            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL.OFFSET)
+            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE)
+            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETLEADPOINT)
+            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSDENSITY)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSGRIDOVERLAP)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso
+                                           m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSDIRECTION)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETX)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETY)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+            Dim CheckMachiningParam As CheckMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSINFILLLINK)
+            CheckMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+         Case Params.INFILLTYPE
+            Dim NumMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLDENSITY)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLGRIDOVERLAP)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLDIRECTION)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLOFFSETX)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLOFFSETY)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
+            Dim CheckMachiningParam As CheckMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLLINK)
+            CheckMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
       End Select
    End Sub
 
@@ -1239,6 +1624,12 @@ Public Class ComboMachiningParam
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSLINKTYPE, m_SelValue.Id, sFilePath)
          Case Params.DYNAMIC_MODE
             WriteMachiningParam(nIndex, MAC_DYNAMICMODE, m_SelValue.Id, sFilePath)
+         Case Params.FLOORTYPE
+            WriteMachiningParam(nIndex, MAC_FLOORTYPE, m_SelValue.Id, sFilePath)
+         Case Params.CEILTYPE
+            WriteMachiningParam(nIndex, MAC_CEILTYPE, m_SelValue.Id, sFilePath)
+         Case Params.INFILLTYPE
+            WriteMachiningParam(nIndex, MAC_INFILLTYPE, m_SelValue.Id, sFilePath)
       End Select
    End Sub
 
@@ -1317,6 +1708,10 @@ Public Class CheckMachiningParam
                m_bValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLEADOUTINVERT, 0)
             Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
                m_bValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, 0)
+            Case Params.AUXSOLIDSINFILLLINK
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSINFILLLINK, 0)
+            Case Params.INFILLLINK
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_INFILLLINK, 0)
          End Select
       End If
       m_bOrigValue = m_bValue
@@ -1340,6 +1735,10 @@ Public Class CheckMachiningParam
             WriteMachiningParam(nIndex, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0), sFilePath)
          Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
             WriteMachiningParam(nIndex, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, If(m_bValue, 1, 0), sFilePath)
+         Case Params.AUXSOLIDSINFILLLINK
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSINFILLLINK, If(m_bValue, 1, 0), sFilePath)
+         Case Params.INFILLLINK
+            WriteMachiningParam(nIndex, MAC_INFILLLINK, If(m_bValue, 1, 0), sFilePath)
       End Select
    End Sub
 

Icarus/MachiningDb/MachiningDbV.xaml

@@ -140,9 +140,16 @@
                                        <ColumnDefinition Width="2*"/>
                                        <ColumnDefinition Width="1*"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <EgtWPFLib5:EgtTextBox2 Grid.Column="1"
                                                             Text="{Binding sValue, UpdateSourceTrigger=Explicit}"
                                                             Margin="2.5,0,0,0"
@@ -156,9 +163,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="1*"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <ComboBox Grid.Column="1"
                                               ItemsSource="{Binding ValueList}"
                                               SelectedItem="{Binding SelValue}"
@@ -175,9 +189,16 @@
                                        <ColumnDefinition Width="2*"/>
                                        <ColumnDefinition Width="1*"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <CheckBox Grid.Column="1"
                                               IsChecked="{Binding bValue}"
                                               HorizontalAlignment="Center"

Icarus/MachiningDb/MachiningDbVM.vb

@@ -26,7 +26,8 @@ Public Class MachiningDbVM
             ' verifico se modificato
             If m_SelMachining.bIsModified Then
                ' chiedo se salvare
-               Select Case MessageBox.Show("Do you want to save the modification done on the selected machining?", "Info", MessageBoxButton.YesNoCancel, MessageBoxImage.Question)
+               Select Case EgtMessageBoxV.Show(Application.Current.MainWindow, "Do you want to save the modification done on the selected machining?", "Info", MessageBoxButton.YesNoCancel, MessageBoxImage.Question)
+                            'MessageBox.Show("Do you want to save the modification done on the selected machining?", "Info", MessageBoxButton.YesNoCancel, MessageBoxImage.Question)
                   Case MessageBoxResult.Yes
                      m_SelMachining.Save()
                   Case MessageBoxResult.No
@@ -198,7 +199,8 @@ Public Class MachiningDbVM
    Public Sub Ok()
       If Not IsNothing(m_SelMachining) AndAlso m_SelMachining.bIsModified Then
          ' chiedo se salvare
-         Select Case MessageBox.Show("Do you want to save modified parameters?", "Warning", MessageBoxButton.YesNoCancel, MessageBoxImage.Warning)
+         Select Case EgtMessageBoxV.Show(Application.Current.MainWindow, "Do you want to save modified parameters?", "Warning", MessageBoxButton.YesNoCancel, MessageBoxImage.Warning)
+                'MessageBox.Show("Do you want to save modified parameters?", "Warning", MessageBoxButton.YesNoCancel, MessageBoxImage.Warning)
             Case MessageBoxResult.Yes
                m_SelMachining.Save()
             Case MessageBoxResult.No
@@ -309,7 +311,8 @@ Public Class MachiningDbVM
    Public Sub Delete()
       If IsNothing(m_SelMachining) Then Return
       ' chiedo conferma
-      Select Case MessageBox.Show("Are you sure you want to delete the selected machining?", "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning)
+      Select Case EgtMessageBoxV.Show(Application.Current.MainWindow, "Are you sure you want to delete the selected machining?", "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning)
+            'MessageBox.Show("Are you sure you want to delete the selected machining?", "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning)
          Case MessageBoxResult.Yes
             m_MachiningList.Remove(m_SelMachining)
             SetIsModified(True)

Icarus/MainWindow/MainWindowM.vb

@@ -75,13 +75,6 @@ Public Class MainWindowM
       End Get
    End Property
 
-   Private m_bAutoNestOption As Boolean = False
-   Friend ReadOnly Property AutoNestOption As Boolean
-      Get
-         Return m_bAutoNestOption
-      End Get
-   End Property
-
    Friend ReadOnly Property sVersion As String
       Get
          Return My.Application.Info.Version.Major.ToString() & "." &
@@ -189,14 +182,17 @@ Public Class MainWindowM
       Dim sKey As String = String.Empty
       EgtUILib.GetPrivateProfileString(S_LICENCE, K_KEY, "", sKey, sLicFile)
       EgtSetKey(sKey)
-      Dim sNestKey As String = ""
-      EgtUILib.GetPrivateProfileString(S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
-      'EgtSetNestKey(sNestKey)
-      ' Verifico abilitazione nesting automatico
-      m_bAutoNestOption = Not String.IsNullOrWhiteSpace(sNestKey)
+      ' Impostazioni per chiave di rete
+      Dim bNetKey As Boolean = ( GetMainPrivateProfileInt( S_GENERAL, K_NETKEY, 0) = 1)
+      EgtSetNetHwKey( bNetKey)
+      Dim sLockId As String = ""
+      EgtUILib.GetPrivateProfileString( S_LICENCE, K_LOCKID, "", sLockId, sLicFile)
+      If Not String.IsNullOrEmpty( sLockId) Then
+         EgtSetLockId( sLockId)
+      End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5583, 2504, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5583, 2504, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(5583, 2510, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(5583, 2510, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & GENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

Icarus/MainWindow/MainWindowVM.vb

@@ -116,7 +116,7 @@ Public Class MainWindowVM
                End If
                ' annullo trasparenza attivata durante edit rib
                If Not IsNothing(Map.refRibPanelVM.SelRib) Then
-                  EgtSetAlpha(Map.refRibPanelVM.SelRib.nExtrusionId, 100)
+                  'EgtSetAlpha(Map.refRibPanelVM.SelRib.nExtrusionId, 100)
                End If
             ElseIf Map.refTopPanelVM.SelModifyMode.ModifyMode = ModifyModes.SHELLNUMBER Then
                ' cancello eventuali layer di modifica
@@ -132,7 +132,7 @@ Public Class MainWindowVM
                End If
                ' annullo trasparenza attivata durante edit rib
                If Not IsNothing(Map.refShellNumberPanelVM.SelShellNumber) Then
-                  EgtSetAlpha(Map.refShellNumberPanelVM.SelShellNumber.nExtrusionId, 100)
+                  'EgtSetAlpha(Map.refShellNumberPanelVM.SelShellNumber.nExtrusionId, 100)
                End If
             End If
          End If
@@ -148,7 +148,7 @@ Public Class MainWindowVM
    End Sub
 
    Private Function ProcessEvents(ByVal nProg As Integer, ByVal nPause As Integer) As Integer
-      If Map.refSliceManagerVM.bCalculating Then
+      If Map.refSliceManagerVM.bCalculating OrElse Map.refSliceManagerVM.bCalcSolid Then
          Map.refSliceManagerVM.ProcessEvents(nProg, nPause)
       End If
       If Not IsNothing(Map.refImportLoadingWndVM) Then
@@ -166,14 +166,7 @@ Public Class MainWindowVM
       If Map.refRightPanelVM.SelPanel = RightPanelVM.Panels.SIMULATION AndAlso Not IsNothing(Map.refSimulationPanelVM) Then
          Map.refSimulationPanelVM.MySimul.ResetSimulation()
       End If
-      ' Gestisco eventuale file corrente modificato
-      Dim bOk As Boolean = True
-      'bOk = ProjFileVM.VerifyProjectModification(Map.refProjManagerVM.CurrProj, ProjectType.PROJ)
-      ' se salvataggio annullato, rimango
-      If Not bOk Then Return
-      Dim bAllowClose As Boolean = Map.refSceneHostVM.MainController.ManageModified()
-      ' Salvo impostazione macchina corrente
-      'Map.refMachinePanelVM.SaveCurrentMachine()
+      Dim bAllowClose As Boolean = Map.refSceneHostVM.ManageModified()
       ' Se non confermata chiusura, esco
       If Not bAllowClose Then Return
       ' salvo modo di visualizzazione
@@ -226,7 +219,8 @@ Public Class MainWindowVM
    ' Manage the MainWindow_Unloaded event. This method is invoked by the cmdMainWindow_Unloaded.
    Public Sub CloseApplication(ByVal param As Object)
       If Map.refSliceManagerVM.bCalculating Then
-         MessageBox.Show("Impossible closing software! Wait end of calculation!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         'MessageBox.Show("Impossible closing software! Wait end of calculation!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, "Impossible closing software! Wait end of calculation!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
          Return
       End If
       CloseApplication()

Icarus/ManagePartPanel/ManagePartPanelVM.vb

@@ -286,7 +286,8 @@ Public Class ManagePartPanelVM
                Next
             Next
             If sErr.Count > 0 Then
-               MessageBox.Show(String.Concat(sErr), "Error")
+               'MessageBox.Show(String.Concat(sErr), "Error")
+               EgtMessageBoxV.Show(Application.Current.MainWindow, String.Concat(sErr), "Error")
                Return
             Else
                ' Creo pezzi e layer necessari

Icarus/ManagePartPanel/ManagePartUtility.vb

@@ -629,7 +629,8 @@ Public Class GeomEntity_MenuItem
          Map.refManagePartPanelVM.SetIsEnabled(True)
          Return
       ElseIf m_Type = ManagePart_Layer.LayerType.DELETE Then
-         If MessageBox.Show("Are you sure you want to delete this entity?", "Delete confirmation", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+         'If MessageBox.Show("Are you sure you want to delete this entity?", "Delete confirmation", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+         If EgtMessageBoxV.Show(Application.Current.MainWindow, "Are you sure you want to delete this entity?", "Delete confirmation", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
             EgtErase(m_OrigEntity.nId)
             ' se l'entita' e' gia' in lista pezzi
             If Not IsNothing(m_OrigEntity.OrigLayer) Then
@@ -1037,7 +1038,8 @@ Public Class ManagerLayer_MenuItem
          Case Else   ' PartMenuCmd.IMPORTPRINT
             Dim bDeleteOldPrint As Boolean = False
             If m_OrigLayer.EntityList.Count > 0 Then
-               If MessageBox.Show("Importing a new print solid the current one will be deleted. Are you sure you want to proced?", "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning) <> MessageBoxResult.Yes Then
+               'If MessageBox.Show("Importing a new print solid the current one will be deleted. Are you sure you want to proced?", "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning) <> MessageBoxResult.Yes Then
+               If EgtMessageBoxV.Show(Application.Current.MainWindow, "Importing a new print solid the current one will be deleted. Are you sure you want to proced?", "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning) <> MessageBoxResult.Yes Then
                   Return
                Else
                   bDeleteOldPrint = True

Icarus/MaterialDb/Material.vb

@@ -769,7 +769,8 @@ Public Class StringMaterialParam
    End Property
 
    Public Sub Original()
-      If MessageBox.Show("Are you sure you want to set this material as original?", "Original material confirmation", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+      'If MessageBox.Show("Are you sure you want to set this material as original?", "Original material confirmation", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+      If EgtMessageBoxV.Show(Application.Current.MainWindow, "Are you sure you want to set this material as original?", "Original material confirmation", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
          m_sGUID = ORIG_MATERIAL
          m_sValue = ORIG_MATERIAL
          NotifyPropertyChanged(NameOf(sValue))

Icarus/MaterialDb/MaterialDbVM.vb

@@ -24,7 +24,8 @@ Public Class MaterialDbVM
          ' verifico se modificato
          If Not IsNothing(m_SelMaterial) AndAlso m_SelMaterial.bIsModified Then
             ' chiedo se salvare
-            Select Case MessageBox.Show("Do you want to save material modification?", "Info", MessageBoxButton.YesNoCancel, MessageBoxImage.Question)
+            'Select Case MessageBox.Show("Do you want to save material modification?", "Info", MessageBoxButton.YesNoCancel, MessageBoxImage.Question)
+            Select Case EgtMessageBoxV.Show(Application.Current.MainWindow, "Do you want to save material modification?", "Info", MessageBoxButton.YesNoCancel, MessageBoxImage.Question)
                Case MessageBoxResult.Yes
                   m_SelMaterial.Save()
                Case MessageBoxResult.No
@@ -236,7 +237,8 @@ Public Class MaterialDbVM
    Public Sub Ok()
       If Not IsNothing(m_SelMaterial) AndAlso m_SelMaterial.bIsModified Then
          ' chiedo se salvare
-         Select Case MessageBox.Show("Do you want to save material modification?", "Warning", MessageBoxButton.YesNoCancel, MessageBoxImage.Warning)
+         'Select Case MessageBox.Show("Do you want to save material modification?", "Warning", MessageBoxButton.YesNoCancel, MessageBoxImage.Warning)
+         Select Case EgtMessageBoxV.Show(Application.Current.MainWindow, "Do you want to save material modification?", "Warning", MessageBoxButton.YesNoCancel, MessageBoxImage.Warning)
             Case MessageBoxResult.Yes
                m_SelMaterial.Save()
             Case MessageBoxResult.No
@@ -365,17 +367,20 @@ Public Class MaterialDbVM
       ' se materiale originale, esco
       If SelMaterialIsOriginal() Then
          If Map.refMainWindowVM.MainWindowM.nUserLevel >= 5 Then
-            If MessageBox.Show("Trying to delete an Original Material! Are you sure you want to delete it?", "", MessageBoxButton.YesNo, MessageBoxImage.Warning) <> MessageBoxResult.Yes Then
+            'If MessageBox.Show("Trying to delete an Original Material! Are you sure you want to delete it?", "", MessageBoxButton.YesNo, MessageBoxImage.Warning) <> MessageBoxResult.Yes Then
+            If EgtMessageBoxV.Show(Application.Current.MainWindow, "Trying to delete an Original Material! Are you sure you want to delete it?", "", MessageBoxButton.YesNo, MessageBoxImage.Warning) <> MessageBoxResult.Yes Then
                Return
             End If
             sCheckMessage = "Trying to delete an Original Material! Are you ABSOLUTELY sure you want to delete it?"
          Else
-            MessageBox.Show("Original material impossible to delete!")
+            'MessageBox.Show("Original material impossible to delete!")
+            EgtMessageBoxV.Show(Application.Current.MainWindow, "Original material impossible to delete!")
             Return
          End If
       End If
       ' chiedo conferma
-      Select Case MessageBox.Show(sCheckMessage, "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning)
+      Select Case EgtMessageBoxV.Show(Application.Current.MainWindow, sCheckMessage, "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning)
+            'MessageBox.Show(sCheckMessage, "Warning", MessageBoxButton.YesNo, MessageBoxImage.Warning)
          Case MessageBoxResult.Yes
             m_MaterialList.Remove(m_SelMaterial)
             SetIsModified(True)

Icarus/My Project/AssemblyInfo.vb

@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.4.2")>
-<Assembly: AssemblyFileVersion("2.5.4.2")>
+<Assembly: AssemblyVersion("2.5.10.1")>
+<Assembly: AssemblyFileVersion("2.5.10.1")>

Icarus/OptionsWindow/OptionWindowVM.vb

@@ -563,17 +563,17 @@ Public Class OptionWindowVM
    End Property
    Public ReadOnly Property ThickLineMsg As String
       Get
-         Return EgtMsg( 6536)                     ' Linee spesse
+         Return EgtMsg(6536)                     ' Linee spesse
       End Get
    End Property
    Public ReadOnly Property SmoothTriMeshMsg As String
       Get
-         Return EgtMsg( 6518)                     ' Superfici smussate
+         Return EgtMsg(6518)                     ' Superfici smussate
       End Get
    End Property
    Public ReadOnly Property UpdateLicenceMsg As String
       Get
-         Return EgtMsg( 6553)                     ' Aggiorna licenza
+         Return EgtMsg(6553)                     ' Aggiorna licenza
       End Get
    End Property
 
@@ -759,15 +759,19 @@ Public Class OptionWindowVM
          End If
       Next
       ' Creo dialogo colori
-      Dim ColorDlg As New System.Windows.Forms.ColorDialog
-      ColorDlg.FullOpen = True
-      ColorDlg.CustomColors = nCustomColors.ToArray()
-      ColorDlg.Color = Col.ToColor()
+      'Dim ColorDlg As New System.Windows.Forms.ColorDialog
+      'ColorDlg.FullOpen = True
+      'ColorDlg.CustomColors = nCustomColors.ToArray()
+      'ColorDlg.Color = Col.ToColor()
+      Dim ColorDlg As New EgtColorPickerV(Application.Current.MainWindow, New EgtColorPickerVM()) With {
+         .CustomColors = nCustomColors.ToArray(),
+         .Color = Col.ToColor()
+      }
       ' Visualizzo dialogo
       If ColorDlg.ShowDialog() <> Windows.Forms.DialogResult.OK Then Return False
-      ' Recupero colore scelto
+      'Recupero colore scelto
       NewCol.FromColor(ColorDlg.Color)
-      ' Salvo eventuali modifiche ai colori custom
+      ''Salvo eventuali modifiche ai colori custom
       sCustomColors = ""
       For Each Color In ColorDlg.CustomColors
          sCustomColors &= Color.ToString() & ","
@@ -797,6 +801,9 @@ Public Class OptionWindowVM
    ''' Manage the MachiningDb closing.  This method is invoked by the CloseMachiningDbCommand.
    ''' </summary>
    Public Sub TopSceneBackgroundCmd()
+      Dim x As New Forms.ColorDialog
+      x.ShowDialog()
+
       ' Recupero colore da Ini
       Dim BackTopColor As New Color3d(192, 192, 192)
       GetMainPrivateProfileColor(S_SCENE, K_BACKTOP, BackTopColor)
@@ -953,31 +960,32 @@ Public Class OptionWindowVM
       Dim sMachDir As String = Path.Combine(Map.refMainWindowVM.MainWindowM.sMachinesRoot, sMachName)
       ' Preparo direttorio temporaneo
       Dim sTempDir As String = Path.Combine(Map.refMainWindowVM.MainWindowM.sMachinesRoot, "Temp")
-      If My.Computer.FileSystem.DirectoryExists( sTempDir) Then
-         My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+      If My.Computer.FileSystem.DirectoryExists(sTempDir) Then
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
       End If
-      My.Computer.FileSystem.CreateDirectory( sTempDir)
+      My.Computer.FileSystem.CreateDirectory(sTempDir)
       ' Unzip nel direttorio temporaneo
       Using zip As New Ionic.Zip.ZipFile(sMachZip)
-         zip.ExtractAll( sTempDir, Ionic.Zip.ExtractExistingFileAction.DoNotOverwrite)
+         zip.ExtractAll(sTempDir, Ionic.Zip.ExtractExistingFileAction.DoNotOverwrite)
       End Using
       ' Se non è una macchina segnalo il problema ed esco
-      If Not My.Computer.FileSystem.FileExists( Path.Combine( sTempDir, sMachName, sMachName & ".ini"))  Or
-         Not My.Computer.FileSystem.FileExists( Path.Combine( sTempDir, sMachName, sMachName & ".mlde")) Then
+      If Not My.Computer.FileSystem.FileExists(Path.Combine(sTempDir, sMachName, sMachName & ".ini")) Or
+         Not My.Computer.FileSystem.FileExists(Path.Combine(sTempDir, sMachName, sMachName & ".mlde")) Then
          ' Il file {0} non contiene una macchina  -  Avviso
          Dim sOut As String = String.Format(EgtMsg(6529), sMachZip)
-         MessageBox.Show(sOut, EgtMsg(MSG_MESSAGEBOX + 2), MessageBoxButton.OK, MessageBoxImage.Warning)
+         'MessageBox.Show(sOut, EgtMsg(MSG_MESSAGEBOX + 2), MessageBoxButton.OK, MessageBoxImage.Warning)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, sOut, EgtMsg(MSG_MESSAGEBOX + 2), MessageBoxButton.OK, MessageBoxImage.Warning)
          ' Rimuovo il direttorio temporaneo ed esco
-         My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
          Return
       End If
       ' Imposto data e ora correnti al file mlde della macchina
       Try
-         File.SetLastWriteTime( Path.Combine( sTempDir, sMachName, sMachName & ".mlde"), System.DateTime.Now)
+         File.SetLastWriteTime(Path.Combine(sTempDir, sMachName, sMachName & ".mlde"), System.DateTime.Now)
       Catch ex As Exception
       End Try
       ' Verifico esistenza di una macchina con lo stesso nome
-      Dim bOldExists As Boolean = My.Computer.FileSystem.DirectoryExists( sMachDir)
+      Dim bOldExists As Boolean = My.Computer.FileSystem.DirectoryExists(sMachDir)
       Dim bUpdate As Boolean = True
       If bOldExists Then
          Dim MachBox As New UpdateMachineV(Application.Current.MainWindow, New UpdateMachineVM(sMachName))
@@ -994,23 +1002,24 @@ Public Class OptionWindowVM
          End Select
          ' Faccio una copia di backup della macchina corrente
          Dim sBackupDir As String = sMachDir & ".old"
-         If My.Computer.FileSystem.DirectoryExists( sBackupDir) Then
-            My.Computer.FileSystem.DeleteDirectory( sBackupDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+         If My.Computer.FileSystem.DirectoryExists(sBackupDir) Then
+            My.Computer.FileSystem.DeleteDirectory(sBackupDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
          End If
          Try
-            My.Computer.FileSystem.MoveDirectory( sMachDir, sBackupDir, True)
+            My.Computer.FileSystem.MoveDirectory(sMachDir, sBackupDir, True)
          Catch ex As Exception
             ' Ripristino lo stato originale ed esco
-            My.Computer.FileSystem.MoveDirectory( sBackupDir, sMachDir, True)
+            My.Computer.FileSystem.MoveDirectory(sBackupDir, sMachDir, True)
             ' L'aggiornamento della macchina "{0}" non è riuscito.
             Dim sKo As String = String.Format(EgtMsg(6535), sMachName)
-            EgtOutLog( sKo)
-            MessageBox.Show(sKo, EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK)
+            EgtOutLog(sKo)
+            'MessageBox.Show(sKo, EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK)
+            EgtMessageBoxV.Show(Application.Current.MainWindow, sKo, EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK)
             Return
          End Try
       End If
       ' Installo la macchina
-      My.Computer.FileSystem.MoveDirectory( Path.Combine( sTempDir, sMachName), sMachDir, True)
+      My.Computer.FileSystem.MoveDirectory(Path.Combine(sTempDir, sMachName), sMachDir, True)
       ' Se è un aggiornamento, recupero utensili, lavorazioni, attrezzaggi e dati per travi
       If bOldExists And bUpdate Then
          Dim sBackupDir As String = sMachDir & ".old"
@@ -1047,10 +1056,11 @@ Public Class OptionWindowVM
       End If
       'La macchina "{0}" è stata aggiornata con successo.
       Dim sOk As String = String.Format(EgtMsg(6530), sMachName)
-      EgtOutLog( sOk)
-      MessageBox.Show(sOk, EgtMsg(MSG_MESSAGEBOX + 3), MessageBoxButton.OK)
+      EgtOutLog(sOk)
+      'MessageBox.Show(sOk, EgtMsg(MSG_MESSAGEBOX + 3), MessageBoxButton.OK)
+      EgtMessageBoxV.Show(Application.Current.MainWindow, sOk, EgtMsg(MSG_MESSAGEBOX + 3), MessageBoxButton.OK)
       ' Rimuovo il direttorio temporaneo
-      My.Computer.FileSystem.DeleteDirectory( sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
+      My.Computer.FileSystem.DeleteDirectory(sTempDir, FileIO.DeleteDirectoryOption.DeleteAllContents)
       ' Aggiorno la lista delle macchina
       MyMachine.InsertMachine(sMachDir, Map.refMachinePanelVM.MachineList)
    End Sub
@@ -1096,7 +1106,7 @@ Public Class OptionWindowVM
             ' aggiungo i file della Macchina
             Dim sMachineDir As String = Map.refMainWindowVM.MainWindowM.sMachinesRoot & "\" & sCurrMachineName
             If Directory.Exists(sMachineDir) Then
-               zip.AddSelectedFiles( "name != *\.git\*.* and name != *.git*", sMachineDir, sCurrMachineName, True)
+               zip.AddSelectedFiles("name != *\.git\*.* and name != *.git*", sMachineDir, sCurrMachineName, True)
             End If
             ' salvo lo zip
             zip.Save()
@@ -1106,12 +1116,14 @@ Public Class OptionWindowVM
          ' L'esportazione della macchina "{0}" non è riuscita.
          Dim sKo As String = String.Format(EgtMsg(6551), sCurrMachineName)
          EgtOutLog(sKo)
-         MessageBox.Show(sKo, EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK)
+         'MessageBox.Show(sKo, EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, sKo, EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK)
       End Try
       'La macchina "{0}" è stata esportata con successo.
       Dim sOk As String = String.Format(EgtMsg(6552), sCurrMachineName)
       EgtOutLog(sOk)
-      MessageBox.Show(sOk, EgtMsg(MSG_MESSAGEBOX + 3), MessageBoxButton.OK)
+      'MessageBox.Show(sOk, EgtMsg(MSG_MESSAGEBOX + 3), MessageBoxButton.OK)
+      EgtMessageBoxV.Show(Application.Current.MainWindow, sOk, EgtMsg(MSG_MESSAGEBOX + 3), MessageBoxButton.OK)
    End Sub
 
 #End Region ' ExportMachine
@@ -1218,10 +1230,15 @@ Public Class LayerColor
          End If
       Next
       ' Creo dialogo colori
-      Dim ColorDlg As New System.Windows.Forms.ColorDialog
-      ColorDlg.FullOpen = True
-      ColorDlg.CustomColors = nCustomColors.ToArray()
-      ColorDlg.Color = Col.ToColor()
+      'Dim ColorDlg As New System.Windows.Forms.ColorDialog
+      'ColorDlg.FullOpen = True
+      'ColorDlg.CustomColors = nCustomColors.ToArray()
+      'ColorDlg.Color = Col.ToColor()
+      '' Visualizzo dialogo
+      Dim ColorDlg As New EgtColorPickerV(Application.Current.MainWindow, New EgtColorPickerVM()) With {
+         .CustomColors = nCustomColors.ToArray(),
+         .Color = Col.ToColor()
+      }
       ' Visualizzo dialogo
       If ColorDlg.ShowDialog() <> Windows.Forms.DialogResult.OK Then Return False
       ' Recupero colore scelto

Icarus/ProjManager/ProjManagerVM.vb

@@ -150,6 +150,20 @@ Public Class ProjManagerVM
    ''' </summary>
    Public Sub NewProjectCmd()
       NewProject(True)
+      'Dim x As New OpenFileDialog()
+      'x.ShowDialog()
+
+      Dim sDir As String = "C:\EgtData\Test3dPrinting"
+      Dim od As New EgtManageFileDialogV(Application.Current.MainWindow, New EgtManageFileDialogVM()) With {
+         .Title = "Open",
+         .Filter = "Icarus project(*.icrs)|*.icrs" &
+                   "|New geometry EgalTech(*.nge)|*.nge",
+         .FileName = "New.icrs",
+         .FilterIndex = 1,
+         .InitialDirectory = sDir,
+         .Mode = 1}
+      od.ShowDialog()
+      Dim sFilePath As String = od.FileName
    End Sub
 
    Friend Sub NewProject(bDialog As Boolean)
@@ -370,7 +384,8 @@ Public Class ProjManagerVM
       GetMainPrivateProfileString(S_GENERAL, K_SUPPORT, "support@egaltech.com", sSupportAddress)
       ' se vuoto do messaggio di errore ed esco
       If String.IsNullOrWhiteSpace(sSupportAddress) Then
-         MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 10), EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK, MessageBoxImage.Error)
+         'MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 10), EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK, MessageBoxImage.Error)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, EgtMsg(MSG_TOPCOMMANDBAR + 10), EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.OK, MessageBoxImage.Error)
          Return
       End If
       ' Recupero numero chiave
@@ -381,14 +396,16 @@ Public Class ProjManagerVM
       EgtGetCurrFilePath(sCurrProject)
       ' se nome file vuoto o con estensione non valida, chiedo se si vuole salvare
       If String.IsNullOrWhiteSpace(sCurrProject) Or EgtGetFileType(sCurrProject) <> FT.NGE Then
-         If MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 11), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+         'If MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 11), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+         If EgtMessageBoxV.Show(Application.Current.MainWindow, EgtMsg(MSG_TOPCOMMANDBAR + 11), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
             Map.refSceneHostVM.SaveProject()
          End If
          EgtGetCurrFilePath(sCurrProject)
-      ' se modificato, chiedo se si vuole salvare
+         ' se modificato, chiedo se si vuole salvare
       Else
          If EgtGetModified() Then
-            If MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 11), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+            'If MessageBox.Show(EgtMsg(MSG_TOPCOMMANDBAR + 11), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+            If EgtMessageBoxV.Show(Application.Current.MainWindow, EgtMsg(MSG_TOPCOMMANDBAR + 11), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
                Map.refSceneHostVM.SaveProject()
             End If
          End If
@@ -475,7 +492,8 @@ Public Class ProjManagerVM
          bEx = True
       End Try
       If bEx OrElse EgtWPFLib5.MapiMailMessage.m_ErrorCode <> 0 Then
-         MessageBox.Show(String.Format(EgtMsg(MSG_TOPCOMMANDBAR + 12), sSupportAddress, sZipToCreate), EgtMsg(MSG_MESSAGEBOX + 3), MessageBoxButton.OK, MessageBoxImage.Information)
+         'MessageBox.Show(String.Format(EgtMsg(MSG_TOPCOMMANDBAR + 12), sSupportAddress, sZipToCreate), EgtMsg(MSG_MESSAGEBOX + 3), MessageBoxButton.OK, MessageBoxImage.Information)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, String.Format(EgtMsg(MSG_TOPCOMMANDBAR + 12), sSupportAddress, sZipToCreate), EgtMsg(MSG_MESSAGEBOX + 3), MessageBoxButton.OK, MessageBoxImage.Information)
       Else
          Map.refMyStatusBarVM.SetOutputMessage(EgtMsg(MSG_TOPCOMMANDBAR + 14), 5)
       End If

Icarus/Project/ProjectV.xaml

@@ -2,7 +2,9 @@
            xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
            xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
            xmlns:PrintApp="clr-namespace:Icarus">
-
+   <DockPanel.Resources>
+      <PrintApp:VisibilityToRowConverter x:Key="VisibilityToRowConverter"/>
+   </DockPanel.Resources>
    <Grid DockPanel.Dock="Top">
       <PrintApp:TopPanelV Grid.Column="1"
                           DataContext="{StaticResource TopPanelVM }"/>
@@ -27,12 +29,27 @@
                                         DataContext="{StaticResource SliderManagerVM}"
                                         HorizontalAlignment="Stretch"/>
       <!--StatusBar -->
-      <PrintApp:ControllerInputPanelV Grid.Row="1"
+      <Grid Grid.RowSpan="2"
+            Grid.ColumnSpan="2">
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="67"/>
+         </Grid.RowDefinitions>
+         <PrintApp:MessagePanelV Grid.Row="{Binding DataContext.Message_Visibility, ElementName=ControllerInputPanelV, Converter={StaticResource VisibilityToRowConverter}}"
+                                 Grid.ColumnSpan="2"
+                                 DataContext="{StaticResource StatusBarVM}"/>
+         <PrintApp:ControllerInputPanelV x:Name="ControllerInputPanelV" Grid.Row="2"
+                                         Grid.ColumnSpan="2"
+                                         DataContext="{StaticResource ControllerInputPanelVM}"/>
+      </Grid>
+
+      <!--<PrintApp:ControllerInputPanelV Grid.Row="1"
                                       Grid.ColumnSpan="2"
                                       DataContext="{StaticResource ControllerInputPanelVM}"/>
       <PrintApp:MessagePanelV Grid.Row="1"
                               Grid.ColumnSpan="2"
-                              DataContext="{StaticResource StatusBarVM}"/>
+                              DataContext="{StaticResource StatusBarVM}"/>-->
       <PrintApp:ShowPanelV Grid.Column="2"
                            Grid.Row="1"
                            DataContext="{StaticResource ShowPanelVM}"/>

Icarus/Project/ProjectVM.vb

@@ -3,6 +3,7 @@ Imports EgtWPFLib5
 Imports EgtUILib
 Imports System.Collections.ObjectModel
 Imports System.IO
+Imports System.Globalization
 
 Public Class ProjectVM
    Inherits VMBase
@@ -28,3 +29,15 @@ Public Class ProjectVM
 
 End Class
 
+Public Class VisibilityToRowConverter
+   Implements IValueConverter
+
+   Public Function Convert(ByVal value As Object, ByVal targetType As Type, ByVal parameter As Object, ByVal culture As CultureInfo) As Object Implements IValueConverter.Convert
+      If IsNothing(value) Then Return 2
+      Return If(value = Visibility.Visible, 1, 2)
+   End Function
+
+   Public Function ConvertBack(ByVal value As Object, ByVal targetType As Type, ByVal parameter As Object, ByVal culture As CultureInfo) As Object Implements IValueConverter.ConvertBack
+      Throw New System.NotImplementedException()
+   End Function
+End Class

Icarus/RibPanel/RibPanelVM.vb

@@ -42,6 +42,10 @@ Public Class RibPanelVM
          Return m_SelRib
       End Get
       Set(value As RibEntity)
+         If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse Map.refRibPanelVM.bCPlaneObj_IsActive Then
+            NotifyPropertyChanged(NameOf(SelRib))
+            Return
+         End If
          m_SelRib = value
          EgtDeselectAll()
          If Not IsNothing(value) Then
@@ -374,6 +378,8 @@ Public Class RibPanelVM
             NotifyPropertyChanged(NameOf(bRotate_IsChecked))
             Map.refRightPanelVM.SetSelPanel(RightPanelVM.Panels.RIBPARAM)
             NotifyPropertyChanged(NameOf(RibList_IsEnabled))
+            ' disattivo interfaccia
+            ManageInterface(False)
          Else
             NotifyPropertyChanged(NameOf(m_bMachParam_IsChecked))
          End If
@@ -383,6 +389,8 @@ Public Class RibPanelVM
       m_bMachParam_IsChecked = False
       NotifyPropertyChanged(NameOf(bMachParam_IsChecked))
       NotifyPropertyChanged(NameOf(RibList_IsEnabled))
+      ' riattivo interfaccia
+      ManageInterface(True)
    End Sub
 
    Public ReadOnly Property Compo_Visibility As Visibility
@@ -391,11 +399,17 @@ Public Class RibPanelVM
       End Get
    End Property
 
+   Private m_RibList_IsEnabled As Boolean = False
    Public ReadOnly Property RibList_IsEnabled As Boolean
       Get
-         Return Not m_bMachParam_IsChecked
+         Return If(m_RibList.Count > 0, m_RibList_IsEnabled, False)
       End Get
    End Property
+   Friend Sub SetRibListIsEnabled(bValue As Boolean)
+      m_RibList_IsEnabled = bValue
+      NotifyPropertyChanged(NameOf(RibList_IsEnabled))
+   End Sub
+
    ' riferimento griglia all'ingresso in questa pagina
    Private m_OriginalGridFrame As New Frame3d
 
@@ -413,6 +427,8 @@ Public Class RibPanelVM
       End Get
    End Property
 
+   Private m_bEscOnLine2P As Boolean = False
+
 #Region "Tooltip"
 
    Public ReadOnly Property Import_ToolTip As String
@@ -596,6 +612,8 @@ Public Class RibPanelVM
          SelRib = m_RibList(0)
          NotifyPropertyChanged(NameOf(SelRib))
       End If
+      ' abilito lista ribs
+      SetRibListIsEnabled(True)
       Map.refSceneHostVM.MainScene.SetStatusNull()
    End Sub
 
@@ -623,7 +641,7 @@ Public Class RibPanelVM
       ' attivo modifiche su scena
       Map.refSceneHostVM.MainScene.ResetStatus()
       ' rendo traspanete estrusione
-      EgtSetAlpha(m_SelRib.nExtrusionId, 50)
+      'EgtSetAlpha(m_SelRib.nExtrusionId, 50)
       ' seleziono percorso corrente
       EgtDeselectAll()
       Select Case RibSelectionType
@@ -631,8 +649,13 @@ Public Class RibPanelVM
             EgtSelectObj(m_SelRib.nCurveId)
          Case RibSelectionTypes.EXTRUSION
             ' creo layer per estrusione
-            Dim nNewExtrusionLayerId As Integer = EgtCreateGroup(m_nPartId)
-            EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
+            Dim nNewExtrusionLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWEXTRUSION)
+            If nNewExtrusionLayerId = GDB_ID.NULL Then
+               nNewExtrusionLayerId = EgtCreateGroup(m_nPartId)
+               EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
+            Else
+               EgtEmptyGroup(nNewExtrusionLayerId)
+            End If
             EgtSetCurrPartLayer(m_nPartId, nNewExtrusionLayerId)
             EgtSelectObj(m_SelRib.nCurveId)
          Case RibSelectionTypes.BOTH
@@ -640,6 +663,8 @@ Public Class RibPanelVM
             EgtSelectObj(m_SelRib.nExtrusionId)
       End Select
       EgtDraw()
+      ' disattivo il resto dell'interfaccia
+      ManageInterface(False)
       Return True
    End Function
 
@@ -649,6 +674,7 @@ Public Class RibPanelVM
    End Sub
 
    Friend Sub OnExecCmdEnd(command As Controller.CMD)
+      m_bEscOnLine2P = False
       Select Case command
          Case Controller.CMD.MODIFYCURVE, Controller.CMD.ADDPOINTCURVE, Controller.CMD.REMOVEPOINTCURVE
             ' leggo altezza estrusione
@@ -666,12 +692,12 @@ Public Class RibPanelVM
             ' seleziono nuova estrusione
             EgtSelectObj(m_SelRib.nExtrusionId)
             ' ripristino trasparenza estrusione
-            EgtSetAlpha(m_SelRib.nExtrusionId, 100)
+            'EgtSetAlpha(m_SelRib.nExtrusionId, 100)
             EgtDraw()
             ' rimetto la selezione scena a null
             Map.refSceneHostVM.MainScene.SetStatusNull()
          Case Controller.CMD.MOVE, Controller.CMD.ROTATE
-            EgtSetAlpha(Map.refRibPanelVM.SelRib.nExtrusionId, 100)
+            ' EgtSetAlpha(Map.refRibPanelVM.SelRib.nExtrusionId, 100)
             ' seleziono nuova estrusione
             EgtSelectObj(m_SelRib.nExtrusionId)
             EgtDraw()
@@ -688,6 +714,10 @@ Public Class RibPanelVM
             ' Imposto flag di ricalcolo slice
             EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
       End Select
+      ' se non ho creato percorso riabilito interfaccia
+      If Not m_bIsCreatingPath Then
+         ManageInterface(True)
+      End If
       If command <> Controller.CMD.LINE2P AndAlso command <> Controller.CMD.EXTRUDE Then Return
       ' se finita creazione estrusione
       If m_bIsCreatingExtrusion Then
@@ -754,9 +784,10 @@ Public Class RibPanelVM
             EgtSelectObj(nNewEntityId)
             If Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.EXTRUDE) Then
                m_bIsCreatingExtrusion = True
+               If Not EgtCurveIsClosed(nNewEntityId) Then
+                  m_bEscOnLine2P = True
+               End If
             Else
-               ' cancello layer
-               'EgtErase(nNewRibLayerId)
                EgtErase(nNewExtrusionLayerId)
             End If
          End If
@@ -779,6 +810,13 @@ Public Class RibPanelVM
             ' rimetto la selezione scena a null
             Map.refSceneHostVM.MainScene.SetStatusNull()
          End If
+         ' se esc su creazione percorso, lo annullo, altrimenti riabilito interfaccia
+         If m_bEscOnLine2P Then
+            m_bEscOnLine2P = False
+         Else
+            If m_bIsCreatingExtrusion Then m_bIsCreatingExtrusion = False
+            ManageInterface(True)
+         End If
       End If
    End Sub
 
@@ -814,6 +852,18 @@ Public Class RibPanelVM
       Return nRibIndex + 1
    End Function
 
+   Friend Sub ManageInterface(bValue As Boolean)
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(bValue)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(bValue)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(bValue)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(bValue)
+      Map.refInstrumentPanelVM.SetInstrumentPanelIsEnabled(bValue)
+      SetRibListIsEnabled(bValue)
+   End Sub
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -837,7 +887,9 @@ Public Class RibPanelVM
    ''' </summary>
    Public Sub Import(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.InsertRib()
+      ManageInterface(True)
    End Sub
 
 #End Region ' Import
@@ -861,6 +913,7 @@ Public Class RibPanelVM
    ''' </summary>
    Public Sub Line2P(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Dim nNewRibLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWRIB)
       If nNewRibLayerId = GDB_ID.NULL Then nNewRibLayerId = EgtCreateGroup(m_nPartId)
       EgtSetName(nNewRibLayerId, LAY_NEWRIB)
@@ -905,10 +958,11 @@ Public Class RibPanelVM
          Else
             SelRib = Nothing
             m_bEdit_IsChecked = False
-            NotifyPropertyChanged(NameOf( bEdit_IsChecked))
+            NotifyPropertyChanged(NameOf(bEdit_IsChecked))
          End If
          NotifyPropertyChanged(NameOf(SelRib))
       End If
+      SetRibListIsEnabled(True)
    End Sub
 
 #End Region    ' Delete
@@ -1192,6 +1246,7 @@ Public Class RibPanelVM
    ''' </summary>
    Public Sub CPlaneElevation(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ELEVATION)
    End Sub
 
@@ -1216,6 +1271,7 @@ Public Class RibPanelVM
    ''' </summary>
    Public Sub CPlaneOrigin(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ORIGIN)
    End Sub
 
@@ -1332,6 +1388,7 @@ Public Class RibPanelVM
    ''' </summary>
    Public Sub CPlaneObj(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       ' salvo selezione precedente e deseleziono altri oggetti
       m_PrevSelObjs.Clear()
       Dim nSelObjId As Integer = EgtGetFirstSelectedObj()

Icarus/RibParamPanel/CopyFromWndVM.vb

@@ -51,11 +51,13 @@ Public Class CopyFromWndVM
 
    Public Sub Ok()
       If IsNothing(m_SelRib) Then
-         MessageBox.Show("Please select the rib from which to copy the parameters!", "Warning", MessageBoxButton.OK, MessageBoxImage.Warning)
+         'MessageBox.Show("Please select the rib from which to copy the parameters!", "Warning", MessageBoxButton.OK, MessageBoxImage.Warning)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, "Please select the rib from which to copy the parameters!", "Warning", MessageBoxButton.OK, MessageBoxImage.Warning)
          Return
       End If
       ' copio i parametri nella rib corrente
-      Dim ParamList As New List(Of MachiningParam.Params)({MachiningParam.Params.RIBSTYPE,
+      Dim ParamList As New List(Of MachiningParam.Params)({MachiningParam.Params.RIBSSTRANDWIDTH,
+                                                           MachiningParam.Params.RIBSTYPE,
                                                            MachiningParam.Params.RIBSOVERLAP,
                                                            MachiningParam.Params.RIBSSTRANDCOUNT,
                                                            MachiningParam.Params.RIBSLINK,
@@ -70,9 +72,9 @@ Public Class CopyFromWndVM
                                                            MachiningParam.Params.RIBSLEADOUTWIPEDIR})
       For Each Param In ParamList
          Select Case Map.refRibPanelVM.SelRib.Type
-            'Case RibEntity.RibTypes.FROMDRAW
-            '   CopyParam(Param, m_SelRib.nExtrusionId, Map.refRibPanelVM.SelRib.nCurveId)
-            '   CopyParam(Param, m_SelRib.nExtrusionId, Map.refRibPanelVM.SelRib.nExtrusionId)
+            Case RibEntity.RibTypes.FROMDRAW
+               CopyParam(Param, m_SelRib.nExtrusionId, Map.refRibPanelVM.SelRib.nCurveId)
+               CopyParam(Param, m_SelRib.nExtrusionId, Map.refRibPanelVM.SelRib.nExtrusionId)
             Case RibEntity.RibTypes.FROMIMPORT
                CopyParam(Param, m_SelRib.nExtrusionId, Map.refRibPanelVM.SelRib.nExtrusionId)
          End Select
@@ -98,11 +100,14 @@ Public Class CopyFromWndVM
             Else
                RibTypeParam.SelValue = RibTypeParam.PartSelValue
             End If
-         Case MachiningParam.Params.RIBSOVERLAP, MachiningParam.Params.RIBSSTRANDCOUNT, MachiningParam.Params.RIBSLEADINLEN, MachiningParam.Params.RIBSLEADOUTLEN,
+         Case MachiningParam.Params.RIBSSTRANDWIDTH, MachiningParam.Params.RIBSOVERLAP, MachiningParam.Params.RIBSSTRANDCOUNT, MachiningParam.Params.RIBSLEADINLEN, MachiningParam.Params.RIBSLEADOUTLEN,
               MachiningParam.Params.RIBSLEADOUTCOASTING, MachiningParam.Params.RIBSLEADOUTWIPE, MachiningParam.Params.RIBSLEADOUTWIPEDIR
             Dim RibTypeParam As RibNumericMachiningParam = Nothing
             Dim dRibParam As Double = 0
             Select Case Type
+               Case MachiningParam.Params.RIBSSTRANDWIDTH
+                  RibTypeParam = Map.refRibParamPanelVM.MachiningParamList.FirstOrDefault(Function(x) x.Type = MachiningParam.Params.RIBSSTRANDWIDTH)
+                  bRead = EgtGetInfo(nFromId, MAC_RIBSSTRANDWIDTH, dRibParam)
                Case MachiningParam.Params.RIBSOVERLAP
                   RibTypeParam = Map.refRibParamPanelVM.MachiningParamList.FirstOrDefault(Function(x) x.Type = MachiningParam.Params.RIBSOVERLAP)
                   bRead = EgtGetInfo(nFromId, MAC_RIBSOVERLAP, dRibParam)

Icarus/RibParamPanel/RibParamPanelVM.vb

@@ -42,7 +42,8 @@ Public Class RibParamPanelVM
 
       m_Type = Cathegories.RIBS
       m_sName = "Ribs"
-      m_MachiningParamList = New List(Of MachiningParam)({New RibComboMachiningParam(MachiningParam.Params.RIBSTYPE, nRibId, nPartId, Me),
+      m_MachiningParamList = New List(Of MachiningParam)({New RibNumericMachiningParam(MachiningParam.Params.RIBSSTRANDWIDTH, nRibId, nPartId, Me),
+                                                          New RibComboMachiningParam(MachiningParam.Params.RIBSTYPE, nRibId, nPartId, Me),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSOVERLAP, nRibId, nPartId, Me),
                                                           New RibNumericMachiningParam(MachiningParam.Params.RIBSSTRANDCOUNT, nRibId, nPartId, Me),
                                                           New RibCheckMachiningParam(MachiningParam.Params.RIBSLINK, nRibId, nPartId, Me),
@@ -135,6 +136,8 @@ Public Class RibParamPanelVM
             Map.refSliceManagerVM.UpdateDimensions()
          End If
       End If
+      ' riattivo lista ribs
+      Map.refRibPanelVM.SetRibListIsEnabled(False)
       ' ripristino modalita' standard
       Map.refRightPanelVM.SetSelPanel(RightPanelVM.Panels.NULL)
       Map.refRibPanelVM.ResetMachParamIsChecked()
@@ -228,10 +231,14 @@ Public Class RibNumericMachiningParam
       MyBase.New(Type, Cathegory)
       Dim bReadFromPart As Boolean = False
       Select Case Type
+         Case Params.RIBSSTRANDWIDTH
+            bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSSTRANDWIDTH, m_dValue)
+            EgtGetInfo(nPartId, MAC_RIBSSTRANDWIDTH, m_dPartValue)
+            m_bIsLen = True
          Case Params.RIBSOVERLAP
             bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSOVERLAP, m_dValue)
             EgtGetInfo(nPartId, MAC_RIBSOVERLAP, m_dPartValue)
-            m_bIsLen = True
+            m_bIsLen = False
          Case Params.RIBSSTRANDCOUNT
             bReadFromPart = EgtGetInfo(nRibId, MAC_RIBSSTRANDCOUNT, m_dValue)
             EgtGetInfo(nPartId, MAC_RIBSSTRANDCOUNT, m_dPartValue)
@@ -288,6 +295,12 @@ Public Class RibNumericMachiningParam
          sWriteValue = DoubleToString(m_dValue, 2)
       End If
       Select Case Type
+         Case Params.RIBSSTRANDWIDTH
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nRibId, MAC_RIBSSTRANDWIDTH, sWriteValue)
+            Else
+               EgtRemoveInfo(nRibId, MAC_RIBSSTRANDWIDTH)
+            End If
          Case Params.RIBSOVERLAP
             If bIsModifiedFromPart Then
                EgtSetInfo(nRibId, MAC_RIBSOVERLAP, sWriteValue)

Icarus/SceneHost/MySceneHostVM.vb

@@ -85,21 +85,23 @@ Public Class MySceneHostVM
          ' Box di avviso chiave mancante : "Chiave non presente. \n Inserirla e riavviare il programma."  "Errore"
          Dim sText As String = EgtMsg(MSG_MISSINGKEYWD + 2) & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 3)
          Dim sTitle As String = EgtMsg(MSG_MISSINGKEYWD + 1)
-         MessageBox.Show(sText, sTitle, MessageBoxButton.OK, MessageBoxImage.Error)
+         'MessageBox.Show(sText, sTitle, MessageBoxButton.OK, MessageBoxImage.Error)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, sText, sTitle, MessageBoxButton.OK, MessageBoxImage.Error)
          ' Altrimenti manca la licenza
       Else
          EgtOutLog("Problems with Licence")
          ' Box di avviso licenza con problemi : "Programma senza licenza. \n Caricala e riavvia il programma."  "Errore"
          Dim sText As String = EgtMsg(MSG_MISSINGKEYWD + 5) & vbCrLf & EgtMsg(MSG_MISSINGKEYWD + 6)
          Dim sTitle As String = EgtMsg(MSG_MISSINGKEYWD + 1)
-         If MessageBox.Show(sText, sTitle, MessageBoxButton.OKCancel, MessageBoxImage.Error) = MessageBoxResult.OK Then
+         'If MessageBox.Show(sText, sTitle, MessageBoxButton.OKCancel, MessageBoxImage.Error) = MessageBoxResult.OK Then
+         If EgtMessageBoxV.Show(Application.Current.MainWindow, sText, sTitle, MessageBoxButton.OKCancel, MessageBoxImage.Error) = MessageBoxResult.OK Then
             ' Apro dialogo per richiesta file licenza
             Dim LicDlg As New Microsoft.Win32.OpenFileDialog() With {
-               .DefaultExt = ".lic",
-               .Filter = "Licences (.lic)|*.lic",
-               .CheckFileExists = True,
-               .ValidateNames = True
-            }
+           .DefaultExt = ".lic",
+           .Filter = "Licences (.lic)|*.lic",
+           .CheckFileExists = True,
+           .ValidateNames = True
+        }
             If LicDlg.ShowDialog() = True Then
                ' Recupero il direttorio del file
                Dim sDir As String = Path.GetDirectoryName(LicDlg.FileName)
@@ -268,14 +270,20 @@ Public Class MySceneHostVM
             .FilterIndex = 1,
             .InitialDirectory = sDir
          }
+         'Dim OpenFileDialog As New EgtManageFileDialogV(Application.Current.MainWindow, New EgtManageFileDialogVM()) With {
+         '   .Title = "Open",
+         '   .Filter = "Icarus project(*.icrs)|*.icrs" &
+         '             "|New geometry EgalTech(*.nge)|*.nge",
+         '   .FilterIndex = 1,
+         '   .InitialDirectory = sDir,
+         '   .Mode = 2
+         '}
          If Not OpenFileDialog.ShowDialog() = Windows.Forms.DialogResult.OK Then Return False
          sFilePath = OpenFileDialog.FileName
       End If
       bOk = MainController.OpenProject(sFilePath, False)
       ' Imposto stato gestione mouse diretto della scena a nessuno
       MainScene.SetStatusNull()
-      ' imposto modalita' import
-      Map.refTopPanelVM.SelPage = Pages.NULL
       Return bOk
    End Function
 
@@ -313,6 +321,13 @@ Public Class MySceneHostVM
       If String.IsNullOrWhiteSpace(sFile) Then sFile = "New.icrs"
       ' Eventuale sistemazione estensione
       sFile = IO.Path.ChangeExtension(sFile, "icrs")
+      Dim sDir As String = MainController.GetCurrFile()
+      If String.IsNullOrWhiteSpace(sDir) Then
+         GetMainPrivateProfileString(S_MRUFILES, K_FILE & 1, "", sDir)
+      End If
+      If Not String.IsNullOrWhiteSpace(sDir) Then
+         sDir = Path.GetDirectoryName(sDir)
+      End If
       ' Assegnazione nome file con dialogo
       Dim SaveFileDialog As New Windows.Forms.SaveFileDialog With {
          .Title = "Save",
@@ -320,6 +335,13 @@ Public Class MySceneHostVM
          .FileName = sFile,
          .InitialDirectory = IO.Path.GetDirectoryName(sFile)
       }
+      'Dim SaveFileDialog As New EgtManageFileDialogV(Application.Current.MainWindow, New EgtManageFileDialogVM()) With {
+      '   .Title = "Save",
+      '   .Filter = "Icarus project(*.icrs)|*.icrs",
+      '   .FileName = sFile,
+      '   .InitialDirectory = sDir,
+      '   .Mode = 2
+      '}
       If SaveFileDialog.ShowDialog = Windows.Forms.DialogResult.OK Then
          Dim sFileName As String = SaveFileDialog.FileName
          EgtSetCurrFilePath(sFileName)
@@ -499,7 +521,8 @@ Public Class MySceneHostVM
          Dim nNewLayerId As Integer = EgtGetFirstGroupInGroup(nNewPartId)
          ' verifico che ci sia una sola entita'
          If EgtGetGroupObjs(nNewLayerId) <> 1 Then
-            MessageBox.Show("Impossible importing file that contains more than one entity.", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+            'MessageBox.Show("Impossible importing file that contains more than one entity.", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+            EgtMessageBoxV.Show(Application.Current.MainWindow, "Impossible importing file that contains more than one entity.", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
          Else
             ' elimino eventuale entita' vecchia
             If MenuItem.OrigLayer.EntityList.Count > 0 AndAlso MenuItem.OrigLayer.EntityList(0).nId <> GDB_ID.NULL Then EgtErase(MenuItem.OrigLayer.EntityList(0).nId)
@@ -703,6 +726,33 @@ Public Class MySceneHostVM
       Return bOk
    End Function
 
+   Public Function ManageModified() As Boolean
+      ' se non modificato, procedo normalmente
+      If Not EgtGetModified() Then
+         Return True
+      End If
+      ' chiedo cosa fare
+      Dim sMsg As String = "Save changes"
+      Dim sCurrFile = ""
+      EgtGetCurrFilePath(sCurrFile)
+      sCurrFile = Path.GetFileName(sCurrFile)
+      If Not String.IsNullOrEmpty(sCurrFile) Then
+         sMsg = String.Format("Save changes to {0}?", sCurrFile)
+      Else
+         sMsg = "Save changes?"
+      End If
+      Dim nRes = EgtMessageBoxV.Show(Application.Current.MainWindow, sMsg, "", MessageBoxButton.YesNoCancel, MessageBoxImage.Question)
+      Select Case nRes
+         Case Windows.Forms.DialogResult.Yes
+            SaveProject()
+            Return True
+         Case Windows.Forms.DialogResult.No
+            Return True
+         Case Else
+            Return False
+      End Select
+   End Function
+
 #End Region    ' ProjectManager
 
 #Region "SCENE EVENTS"
@@ -1023,7 +1073,8 @@ Public Class MySceneHostVM
       EgtErase(EgtGetFirstPart())
       CurrentMachine.CreateMachineTable()
       If Not bOk Then
-         MessageBox.Show(Application.Current.MainWindow, EgtMsg(10002), EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)  ' Error on new file  - Error
+         'MessageBox.Show(Application.Current.MainWindow, EgtMsg(10002), EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)  ' Error on new file  - Error
+         EgtMessageBoxV.Show(Application.Current.MainWindow, EgtMsg(10002), EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)
       End If
 
       Map.refTopPanelVM.PartList.Clear()
@@ -1052,7 +1103,8 @@ Public Class MySceneHostVM
          Else
             sMsg = EgtMsg(10009) & " '" & sFile & "'"            'Missing file
          End If
-         MessageBox.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)        'Error
+         'MessageBox.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)        'Error
+         EgtMessageBoxV.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)
       End If
       ' leggo materiale e macchina
       Dim nTabPartId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, TABLE)
@@ -1064,7 +1116,8 @@ Public Class MySceneHostVM
             ' imposto la macchina
             Map.refMachinePanelVM.SelectedMachine = ProjectMachine
          Else
-            MessageBox.Show("Project machine not found! Impossible to open the project.", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+            'MessageBox.Show("Project machine not found! Impossible to open the project.", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+            EgtMessageBoxV.Show(Application.Current.MainWindow, "Project machine not found! Impossible to open the project.", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
             Map.refProjManagerVM.NewProject(False)
             Return
          End If
@@ -1087,7 +1140,9 @@ Public Class MySceneHostVM
          Else
             Dim sMaterialName As String = ""
             EgtGetInfo(nTabPartId, KEY_MATERIAL_NAME, sMaterialName)
-            MessageBox.Show("Project material (Guid:" & sMaterialGuid & " Name:""" & sMaterialName & """) not found!" & Environment.NewLine &
+            'MessageBox.Show("Project material (Guid:" & sMaterialGuid & " Name:""" & sMaterialName & """) not found!" & Environment.NewLine &
+            '                "Please select another material!", "Warning", MessageBoxButton.OK, MessageBoxImage.Warning)
+            EgtMessageBoxV.Show(Application.Current.MainWindow, "Project material (Guid:" & sMaterialGuid & " Name:""" & sMaterialName & """) not found!" & Environment.NewLine &
                             "Please select another material!", "Warning", MessageBoxButton.OK, MessageBoxImage.Warning)
          End If
       End If
@@ -1171,7 +1226,8 @@ Public Class MySceneHostVM
       Else
          Map.refProjManagerVM.MruFiles.Remove(sFile)
          Dim sMsg As String = EgtMsg(10004) & " '" & sFile & "'"            'Error saving file
-         MessageBox.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)     ' Error
+         'MessageBox.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)     ' Error
+         EgtMessageBoxV.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)
       End If
    End Sub
 
@@ -1179,7 +1235,8 @@ Public Class MySceneHostVM
       ' Segnalo eventuale errore
       If Not bOk Then
          Dim sMsg As String = EgtMsg(10006) & " '" & sFile & "'"            'Error importing file
-         MessageBox.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)   ' Error
+         'MessageBox.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)   ' Error
+         EgtMessageBoxV.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)
       End If
       Map.refProjManagerVM.MruImportFiles.Add(sFile)
       EgtSetInfo(EgtGetLastPart(), FILE_PATH, sFile)
@@ -1197,7 +1254,8 @@ Public Class MySceneHostVM
          ' Abilito progress e bottone stop
          Map.refMyStatusBarVM.StartLoading("", True)
       Else
-         MessageBox.Show(Application.Current.MainWindow, EgtMsg(10005), EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)   ' File type unknown  - Error
+         'MessageBox.Show(Application.Current.MainWindow, EgtMsg(10005), EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)   ' File type unknown  - Error
+         EgtMessageBoxV.Show(Application.Current.MainWindow, EgtMsg(10005), EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)   ' File type unknown  - Error
       End If
    End Sub
 
@@ -1210,7 +1268,8 @@ Public Class MySceneHostVM
       ' Segnalo eventuale errore
       If Not bOk Then
          Dim sMsg As String = EgtMsg(10006) & " '" & sFile & "'"            'Error importing file
-         MessageBox.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)   ' Error
+         'MessageBox.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)   ' Error
+         EgtMessageBoxV.Show(Application.Current.MainWindow, sMsg, EgtMsg(10001), MessageBoxButton.OK, MessageBoxImage.Error)   ' Error
       ElseIf Path.GetExtension(sFile) <> ".cnc" Then
          ' creo oggetto pezzo in lista
          'Map.refProjectVM.

Icarus/SecondaryWindow/SecondaryWindowVM.vb

@@ -183,7 +183,8 @@ Public Class SecondaryWindowVM
    ' Manage the MainWindow_Unloaded event. This method is invoked by the cmdMainWindow_Unloaded.
    Public Sub CloseApplication(ByVal param As Object)
       If Map.refSliceManagerVM.bCalculating Then
-         MessageBox.Show("Impossible closing software! Wait end of calculation!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         'MessageBox.Show("Impossible closing software! Wait end of calculation!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, "Impossible closing software! Wait end of calculation!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
          Return
       End If
       Map.refMainWindowVM.CloseApplication()

Icarus/ShellNumberPanel/ShellNumberPanelVM.vb

@@ -40,6 +40,10 @@ Public Class ShellNumberPanelVM
          Return m_SelShellNumber
       End Get
       Set(value As ShellNumberEntity)
+         If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse Map.refShellNumberPanelVM.bCPlaneObj_IsActive Then
+            NotifyPropertyChanged(NameOf(SelShellNumber))
+            Return
+         End If
          m_SelShellNumber = value
          EgtDeselectAll()
          If Not IsNothing(value) Then
@@ -354,6 +358,8 @@ Public Class ShellNumberPanelVM
             NotifyPropertyChanged(NameOf(bRotate_IsChecked))
             Map.refRightPanelVM.SetSelPanel(RightPanelVM.Panels.SHELLNUMBERPARAM)
             NotifyPropertyChanged(NameOf(ShellNumberList_IsEnabled))
+            ' disattivo interfaccia
+            ManageInterface(False)
          Else
             NotifyPropertyChanged(NameOf(m_bMachParam_IsChecked))
          End If
@@ -363,6 +369,8 @@ Public Class ShellNumberPanelVM
       m_bMachParam_IsChecked = False
       NotifyPropertyChanged(NameOf(bMachParam_IsChecked))
       NotifyPropertyChanged(NameOf(ShellNumberList_IsEnabled))
+      ' riattivo interfaccia
+      ManageInterface(True)
    End Sub
 
    Public ReadOnly Property Compo_Visibility As Visibility
@@ -371,11 +379,17 @@ Public Class ShellNumberPanelVM
       End Get
    End Property
 
+   Private m_ShellNumberList_IsEnabled As Boolean = False
    Public ReadOnly Property ShellNumberList_IsEnabled As Boolean
       Get
-         Return Not m_bMachParam_IsChecked
+         Return If(m_ShellNumberList.Count > 0, m_ShellNumberList_IsEnabled, False)
       End Get
    End Property
+   Friend Sub SetShellNumberListIsEnabled(bValue As Boolean)
+      m_ShellNumberList_IsEnabled = bValue
+      NotifyPropertyChanged(NameOf(ShellNumberList_IsEnabled))
+   End Sub
+
    ' riferimento griglia all'ingresso in questa pagina
    Private m_OriginalGridFrame As New Frame3d
 
@@ -393,6 +407,8 @@ Public Class ShellNumberPanelVM
       End Get
    End Property
 
+   Private m_bEscOnLine2P As Boolean = False
+
 #Region "Tooltip"
 
    Public ReadOnly Property Import_ToolTip As String
@@ -576,6 +592,8 @@ Public Class ShellNumberPanelVM
          SelShellNumber = m_ShellNumberList(0)
          NotifyPropertyChanged(NameOf(SelShellNumber))
       End If
+      ' abilito lista shell number
+      SetShellNumberListIsEnabled(True)
       Map.refSceneHostVM.MainScene.SetStatusNull()
    End Sub
 
@@ -611,8 +629,13 @@ Public Class ShellNumberPanelVM
             EgtSelectObj(m_SelShellNumber.nCurveId)
          Case ShellNumberSelectionTypes.EXTRUSION
             ' creo layer per estrusione
-            Dim nNewExtrusionLayerId As Integer = EgtCreateGroup(m_nPartId)
-            EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
+            Dim nNewExtrusionLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWEXTRUSION)
+            If nNewExtrusionLayerId = GDB_ID.NULL Then
+               nNewExtrusionLayerId = EgtCreateGroup(m_nPartId)
+               EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
+            Else
+               EgtEmptyGroup(nNewExtrusionLayerId)
+            End If
             EgtSetCurrPartLayer(m_nPartId, nNewExtrusionLayerId)
             EgtSelectObj(m_SelShellNumber.nCurveId)
          Case ShellNumberSelectionTypes.BOTH
@@ -620,6 +643,8 @@ Public Class ShellNumberPanelVM
             EgtSelectObj(m_SelShellNumber.nExtrusionId)
       End Select
       EgtDraw()
+      ' disattivo il resto dell'interfaccia
+      ManageInterface(False)
       Return True
    End Function
 
@@ -629,6 +654,7 @@ Public Class ShellNumberPanelVM
    End Sub
 
    Friend Sub OnExecCmdEnd(command As Controller.CMD)
+      m_bEscOnLine2P = False
       Select Case command
          Case Controller.CMD.MODIFYCURVE, Controller.CMD.ADDPOINTCURVE, Controller.CMD.REMOVEPOINTCURVE
             ' leggo altezza estrusione
@@ -668,6 +694,10 @@ Public Class ShellNumberPanelVM
             ' Imposto flag di ricalcolo slice
             EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
       End Select
+      ' se non ho creato percorso riabilito interfaccia
+      If Not m_bIsCreatingPath Then
+         ManageInterface(True)
+      End If
       If command <> Controller.CMD.LINE2P AndAlso command <> Controller.CMD.EXTRUDE Then Return
       ' se finita creazione estrusione
       If m_bIsCreatingExtrusion Then
@@ -710,6 +740,7 @@ Public Class ShellNumberPanelVM
          If NewGeomType = GDB_TY.CRV_COMPO Then
             If Not EgtCurveIsClosed(nNewEntityId) Then
                EgtCloseCurveCompo(nNewEntityId)
+               m_bEscOnLine2P = True
             End If
             EgtSetName(nNewEntityId, RIB_CURVE)
             ' resetto colore entita'
@@ -762,6 +793,13 @@ Public Class ShellNumberPanelVM
             ' rimetto la selezione scena a null
             Map.refSceneHostVM.MainScene.SetStatusNull()
          End If
+         ' se esc su creazione percorso, lo annullo, altrimenti riabilito interfaccia
+         If m_bEscOnLine2P Then
+            m_bEscOnLine2P = False
+         Else
+            If m_bIsCreatingExtrusion Then m_bIsCreatingExtrusion = False
+            ManageInterface(True)
+         End If
       End If
    End Sub
 
@@ -797,6 +835,19 @@ Public Class ShellNumberPanelVM
       Return nShellNumberIndex + 1
    End Function
 
+   Friend Sub ManageInterface(bValue As Boolean)
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(bValue)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(bValue)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(bValue)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(bValue)
+      Map.refInstrumentPanelVM.SetInstrumentPanelIsEnabled(bValue)
+      SetShellNumberListIsEnabled(bValue)
+   End Sub
+
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -820,7 +871,9 @@ Public Class ShellNumberPanelVM
    ''' </summary>
    Public Sub Import(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.InsertShellNumber()
+      ManageInterface(True)
    End Sub
 
 #End Region ' Import
@@ -844,6 +897,7 @@ Public Class ShellNumberPanelVM
    ''' </summary>
    Public Sub Line2P(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Dim nNewShellNumberLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWRIB)
       If nNewShellNumberLayerId = GDB_ID.NULL Then nNewShellNumberLayerId = EgtCreateGroup(m_nPartId)
       EgtSetName(nNewShellNumberLayerId, LAY_NEWRIB)
@@ -892,6 +946,7 @@ Public Class ShellNumberPanelVM
          End If
          NotifyPropertyChanged(NameOf(SelShellNumber))
       End If
+      SetShellNumberListIsEnabled(True)
    End Sub
 
 #End Region    ' Delete
@@ -1176,6 +1231,7 @@ Public Class ShellNumberPanelVM
    ''' </summary>
    Public Sub CPlaneElevation(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ELEVATION)
    End Sub
 
@@ -1200,6 +1256,7 @@ Public Class ShellNumberPanelVM
    ''' </summary>
    Public Sub CPlaneOrigin(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ORIGIN)
    End Sub
 
@@ -1316,6 +1373,7 @@ Public Class ShellNumberPanelVM
    ''' </summary>
    Public Sub CPlaneObj(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       ' salvo selezione precedente e deseleziono altri oggetti
       m_PrevSelObjs.Clear()
       Dim nSelObjId As Integer = EgtGetFirstSelectedObj()

Icarus/SimulationPanel/MySimulation.vb

@@ -71,11 +71,14 @@ Public Class MySimulation
                   Case MCH_SIM.OUTSTROKE
                      Dim sInfo As String = String.Empty
                      EgtGetOutstrokeInfo(sInfo)
-                     MessageBox.Show(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, EgtMsg(MSG_SIMULATIONPAGEUC + 5), MessageBoxButton.OK, MessageBoxImage.Stop)        'Extracorsa ...
+                     'MessageBox.Show(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, EgtMsg(MSG_SIMULATIONPAGEUC + 5), MessageBoxButton.OK, MessageBoxImage.Stop)        'Extracorsa ...
+                     EgtMessageBoxV.Show(Application.Current.MainWindow, EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, EgtMsg(MSG_SIMULATIONPAGEUC + 5), MessageBoxButton.OK, MessageBoxImage.Stop)
                   Case MCH_SIM.DIR_ERR
-                     MessageBox.Show(EgtMsg(MSG_SIMULATIONPAGEUC + 3), EgtMsg(MSG_SIMULATIONPAGEUC + 5), MessageBoxButton.OK, MessageBoxImage.Stop)         'Direzione utensile irraggiungibile
+                     'MessageBox.Show(EgtMsg(MSG_SIMULATIONPAGEUC + 3), EgtMsg(MSG_SIMULATIONPAGEUC + 5), MessageBoxButton.OK, MessageBoxImage.Stop)         'Direzione utensile irraggiungibile
+                     EgtMessageBoxV.Show(Application.Current.MainWindow, EgtMsg(MSG_SIMULATIONPAGEUC + 3), EgtMsg(MSG_SIMULATIONPAGEUC + 5), MessageBoxButton.OK, MessageBoxImage.Stop)
                   Case Else
-                     MessageBox.Show(EgtMsg(MSG_SIMULATIONPAGEUC + 4), EgtMsg(MSG_SIMULATIONPAGEUC + 5), MessageBoxButton.OK, MessageBoxImage.Stop)         'Errore
+                     'MessageBox.Show(EgtMsg(MSG_SIMULATIONPAGEUC + 4), EgtMsg(MSG_SIMULATIONPAGEUC + 5), MessageBoxButton.OK, MessageBoxImage.Stop)         'Errore
+                     EgtMessageBoxV.Show(Application.Current.MainWindow, EgtMsg(MSG_SIMULATIONPAGEUC + 4), EgtMsg(MSG_SIMULATIONPAGEUC + 5), MessageBoxButton.OK, MessageBoxImage.Stop)
                End Select
             End If
             ' Aggiorno stato visualizzazione macchina (dipende anche da utensile)

Icarus/SimulationPanel/SimulationPanelVM.vb

@@ -88,10 +88,12 @@ Public Class SimulationPanelVM
       If Not EgtSimInit() OrElse Not EgtSimStart() Then
          If EgtGetLastMachMgrErrorId() <> 0 Then
             Dim sErr As String = EgtGetLastMachMgrErrorString()
-            MessageBox.Show(sErr, EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Exclamation)
-         Else
-            MessageBox.Show(EgtMsg(MSG_MESSAGEBOX + 10), EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Error)
-         End If
+                'MessageBox.Show(sErr, EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Exclamation)
+                EgtMessageBoxV.Show(Application.Current.MainWindow, sErr, EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Exclamation)
+            Else
+                'MessageBox.Show(EgtMsg(MSG_MESSAGEBOX + 10), EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Error)
+                EgtMessageBoxV.Show(Application.Current.MainWindow, EgtMsg(MSG_MESSAGEBOX + 10), EgtMsg(MSG_SIMULATION + 5), MessageBoxButton.OK, MessageBoxImage.Error)
+            End If
       End If
       ' Imposto stato corrente
       MySimul.SetSimulationStatus(MCH_SIM_ST.UI_STOP)

Icarus/SliceManager/SliceManagerVM.vb

@@ -44,6 +44,11 @@ Public Class SliceManagerVM
    Private m_bCalcTFS As Boolean = False
    Private m_bGenerate As Boolean = False
    Private m_bCalcSolid As Boolean = False
+   Friend ReadOnly Property bCalcSolid As Boolean
+      Get
+         Return m_bCalcSolid
+      End Get
+   End Property
    Friend Sub SetCalcSolid(value As Boolean)
       m_bCalcSolid = value
    End Sub
@@ -317,7 +322,8 @@ Public Class SliceManagerVM
       End If
       EgtGetCurrFilePath(sCurrProject)
       If String.IsNullOrWhiteSpace(sCurrProject) Or EgtGetFileType(sCurrProject) <> FT.NGE Then
-         MessageBox.Show("Save project before calculating slices!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         'MessageBox.Show("Save project before calculating slices!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, "Save project before calculating slices!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
          Return False
       End If
       ' mostro barre di caricamento
@@ -391,7 +397,8 @@ Public Class SliceManagerVM
       Map.refTopPanelVM.SelPart.RefreshPrintLayers()
       ' in caso di errore, segnalazione
       If Not bOk Then
-         MessageBox.Show("Error in slicing! See log file.", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         'MessageBox.Show("Error in slicing! See log file.", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, "Error in slicing! See log file.", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
       End If
       If bOk And m_bGenerate Then
          ' verifico esistenza e correttezza machgroup
@@ -419,7 +426,8 @@ Public Class SliceManagerVM
             Else
                sOut &= sMsg
             End If
-            MessageBox.Show(sOut, "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+            'MessageBox.Show(sOut, "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+            EgtMessageBoxV.Show(Application.Current.MainWindow, sOut, "Error", MessageBoxButton.OK, MessageBoxImage.Error)
          End If
       End If
       '  aggiorno tempo e massa
@@ -476,7 +484,8 @@ Public Class SliceManagerVM
       EgtLuaCreateGlobTable("MACH")
       If Not EgtLuaExecFile(sInitMachScriptPath) Then
          EgtOutLog("Error executing Machining init script " & sInitMachScriptPath)
-         MessageBox.Show(EgtMsg(5463) & " " & sInitMachScriptPath, EgtMsg(5461), MessageBoxButton.OK, MessageBoxImage.Error)
+         'MessageBox.Show(EgtMsg(5463) & " " & sInitMachScriptPath, EgtMsg(5461), MessageBoxButton.OK, MessageBoxImage.Error)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, EgtMsg(5463) & " " & sInitMachScriptPath, EgtMsg(5461), MessageBoxButton.OK, MessageBoxImage.Error)
          Return False
       End If
       Dim nErr As Integer = 999
@@ -495,7 +504,8 @@ Public Class SliceManagerVM
       EgtLuaCreateGlobTable("MACH")
       If Not EgtLuaExecFile(sExitMachScriptPath) Then
          EgtOutLog("Error executing Machining exit script " & sExitMachScriptPath)
-         MessageBox.Show(EgtMsg(5464) & " " & sExitMachScriptPath, EgtMsg(5461), MessageBoxButton.OK, MessageBoxImage.Error)
+         'MessageBox.Show(EgtMsg(5464) & " " & sExitMachScriptPath, EgtMsg(5461), MessageBoxButton.OK, MessageBoxImage.Error)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, EgtMsg(5464) & " " & sExitMachScriptPath, EgtMsg(5461), MessageBoxButton.OK, MessageBoxImage.Error)
          Return False
       End If
       Dim nErr As Integer = 999
@@ -526,26 +536,32 @@ Public Class SliceManagerVM
    ''' Execute the CPlaneTop.  This method is invoked by the CPlaneTopCommand.
    ''' </summary>
    Public Sub Slice()
+      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse Map.refStartMachPanelVM.bCPlaneObj_IsActive OrElse Map.refRibPanelVM.bCPlaneObj_IsActive OrElse
+         Map.refShellNumberPanelVM.bCPlaneObj_IsActive OrElse Map.refFilledSolidPanelVM.bCPlaneObj_IsActive Then Return
       If m_bCalculating Then Return
       m_bCalculating = True
       If IsNothing(Map.refTopPanelVM.SelPart) Then
-         MessageBox.Show("No parts to slice!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         'MessageBox.Show("No parts to slice!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, "No parts to slice!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
          m_bCalculating = False
          Return
       End If
       If IsNothing(Map.refTopPanelVM.SelMaterial) Then
-         MessageBox.Show("No print material set!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         'MessageBox.Show("No print material set!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, "No print material set!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
          m_bCalculating = False
          Return
       End If
       If IsNothing(Map.refTopPanelVM.SelMachining) OrElse IsNothing(Map.refTopPanelVM.CurrMachining) OrElse Map.refTopPanelVM.CurrMachining.dCurrStrandH <= 0 Then
-         MessageBox.Show("No print parameters set!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         'MessageBox.Show("No print parameters set!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, "No print parameters set!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
          m_bCalculating = False
          Return
       End If
       Dim b3Print As BBox3d = Map.refDispositionPanelVM.GetSolidForReferenceBBox(Map.refTopPanelVM.SelPart)
       If Not String.IsNullOrWhiteSpace(CurrentMachine.sMachDataIniFile) AndAlso Not CurrentMachine.b3ExtrusionArea.EnclosesXY(b3Print) Then
-         MessageBox.Show("Part outside the extrusion area!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         'MessageBox.Show("Part outside the extrusion area!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, "Part outside the extrusion area!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
          m_bCalculating = False
          Return
       End If
@@ -707,7 +723,8 @@ Public Class SliceManagerVM
                Process.Start("Notepad.exe", sIsoFilePath)
                ' altrimenti lo segnalo
             Else
-               MessageBox.Show("Edit failed, missing part program file" & " (" & sIsoFilePath & ")")
+               'MessageBox.Show("Edit failed, missing part program file" & " (" & sIsoFilePath & ")")
+               EgtMessageBoxV.Show(Application.Current.MainWindow, "Edit failed, missing part program file" & " (" & sIsoFilePath & ")")
             End If
          End If
          NotifyPropertyChanged(NameOf(Time_Visibility))

Icarus/SliderManager/SliderManagerVM.vb

@@ -20,23 +20,22 @@ Public Class SliderManagerVM
       End Get
       Set(value As Integer)
          If IsNothing(Map.refTopPanelVM.SelPart) Then Return
+         Dim DisableMgr As New DisableModifiedMgr
          Select Case m_nSelViewSlider
             Case ViewSliderType.ONLY_SELECTED
-               ' se diverso da nullo nascondo precedente
-               If Not IsNothing(Map.refTopPanelVM.SelPart) Then
-                  ' riporto vecchio strato a visualizzazione di tutti i solidi
-                  If m_nLayerIndex > 0 Then dLayerAdvancement = 100
-                  If m_nLayerIndex = 0 Then
-                     For Each Layer In Map.refTopPanelVM.SelPart.LayerList
-                        EgtSetStatus(Layer.nLayerId, GDB_ST.OFF)
-                     Next
-                  ElseIf m_nLayerIndex > 0 Then
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).nLayerId, GDB_ST.OFF)
-                  End If
+               ' nascondo precedente
+               ' riporto vecchio strato a visualizzazione di tutti i solidi
+               If m_nLayerIndex > 0 Then dLayerAdvancement = 100
+               If m_nLayerIndex = 0 Then
+                  For Each Layer In Map.refTopPanelVM.SelPart.LayerList
+                     EgtSetStatus(Layer.nLayerId, GDB_ST.OFF)
+                  Next
+               ElseIf m_nLayerIndex > 0 Then
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).nLayerId, GDB_ST.OFF)
                End If
                m_nLayerIndex = value
                ' se diverso da nullo visualizzo corrente
-               If Not IsNothing(Map.refTopPanelVM.SelPart) AndAlso m_nLayerIndex > 0 Then EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).nLayerId, GDB_ST.ON_)
+               If m_nLayerIndex > 0 Then EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(m_nLayerIndex - 1).nLayerId, GDB_ST.ON_)
                ' porto barra nuovo strato a 100 
                If m_nLayerIndex > 0 Then SetLayerAdvancement(100)
             Case ViewSliderType.UNTIL_SELECTED
@@ -64,6 +63,7 @@ Public Class SliderManagerVM
                End If
                m_nLayerIndex = value
          End Select
+         DisableMgr.ReEnable()
          NotifyPropertyChanged(NameOf(ghShowValue))
          NotifyPropertyChanged(NameOf(ghValueIndex))
          NotifyPropertyChanged(NameOf(ghValueHeight))
@@ -71,47 +71,44 @@ Public Class SliderManagerVM
       End Set
    End Property
    Private Sub SetLayerIndex(value As Integer)
+      If IsNothing(Map.refTopPanelVM.SelPart) Then Return
+      Dim DisableMgr As New DisableModifiedMgr
       Select Case m_nSelViewSlider
          Case ViewSliderType.ONLY_SELECTED
-            If Not IsNothing(Map.refTopPanelVM.SelPart) Then
-               ' riporto vecchio strato a visualizzazione di tutti i solidi
-               If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
-               For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
-                  If nLayerInd = value - 1 Then
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
-                  Else
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
-                  End If
-               Next
-            End If
+            ' riporto vecchio strato a visualizzazione di tutti i solidi
+            If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
+            For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
+               If nLayerInd = value - 1 Then
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
+               Else
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
+               End If
+            Next
             m_nLayerIndex = value
          Case ViewSliderType.UNTIL_SELECTED
-            If Not IsNothing(Map.refTopPanelVM.SelPart) Then
-               ' riporto vecchio strato a visualizzazione di tutti i solidi
-               If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
-               For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
-                  If nLayerInd <= value - 1 Then
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
-                  Else
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
-                  End If
-               Next
-            End If
+            ' riporto vecchio strato a visualizzazione di tutti i solidi
+            If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
+            For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
+               If nLayerInd <= value - 1 Then
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
+               Else
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
+               End If
+            Next
             m_nLayerIndex = value
          Case ViewSliderType.FROM_SELECTED
-            If Not IsNothing(Map.refTopPanelVM.SelPart) Then
-               ' riporto vecchio strato a visualizzazione di tutti i solidi
-               If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
-               For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
-                  If nLayerInd >= value - 1 Then
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
-                  Else
-                     EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
-                  End If
-               Next
-            End If
+            ' riporto vecchio strato a visualizzazione di tutti i solidi
+            If m_nLayerIndex > 0 AndAlso m_nLayerIndex < Map.refTopPanelVM.SelPart.LayerList.Count Then dLayerAdvancement = 100
+            For nLayerInd = 0 To Map.refTopPanelVM.SelPart.LayerList.Count - 1
+               If nLayerInd >= value - 1 Then
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.ON_)
+               Else
+                  EgtSetStatus(Map.refTopPanelVM.SelPart.LayerList(nLayerInd).nLayerId, GDB_ST.OFF)
+               End If
+            Next
             m_nLayerIndex = value
       End Select
+      DisableMgr.ReEnable()
       NotifyPropertyChanged(NameOf(nLayerIndex))
       NotifyPropertyChanged(NameOf(ghShowValue))
       NotifyPropertyChanged(NameOf(ghValueIndex))
@@ -201,6 +198,8 @@ Public Class SliderManagerVM
          Return m_dLayerAdvancement
       End Get
       Set(value As Double)
+         If IsNothing(Map.refTopPanelVM.SelPart) Then Return
+         Dim DisableMgr As New DisableModifiedMgr
          Select Case m_nSelViewSlider
             Case ViewSliderType.ONLY_SELECTED
                Dim nTotSolid As Integer = 0
@@ -247,6 +246,7 @@ Public Class SliderManagerVM
                End If
                m_dLayerAdvancement = value
          End Select
+         DisableMgr.ReEnable()
          EgtDraw()
       End Set
    End Property
@@ -335,6 +335,7 @@ Public Class SliderManagerVM
          WriteMainPrivateProfileString(S_PRINTING3D, K_VIEWSLIDER, m_nSelViewSlider)
          ' ciclo tutti i layer per nasconderli/mostrarli
          If IsNothing(Map.refTopPanelVM.SelPart) OrElse IsNothing(Map.refTopPanelVM.SelPart.LayerList) Then Return
+         Dim DisableMgr As New DisableModifiedMgr
          Select Case m_nSelViewSlider
             Case ViewSliderType.ONLY_SELECTED
                For Each Layer In Map.refTopPanelVM.SelPart.LayerList
@@ -361,6 +362,7 @@ Public Class SliderManagerVM
                   End If
                Next
          End Select
+         DisableMgr.ReEnable()
          ' mostro/nascondo slider orizzontale
          m_LayerAdvancement_Visibility = If(m_nSelViewSlider = ViewSliderType.ONLY_SELECTED, Visibility.Visible, Visibility.Hidden)
          NotifyPropertyChanged(NameOf(LayerAdvancement_Visibility))

Icarus/StartMachPanel/StartMachPanelV.xaml

@@ -28,6 +28,7 @@
              ItemsSource="{Binding StartList}"
              SelectedItem="{Binding SelStart}"
              DisplayMemberPath="ghName"
+             IsEnabled="{Binding StartList_IsEnabled}"
              Style="{StaticResource LeftPanel_ComboBox}"/>
    <!-- Add Button -->
    <ToggleButton x:Name="AddBtn"

Icarus/StartMachPanel/StartMachPanelVM.vb

@@ -35,6 +35,10 @@ Public Class StartMachPanelVM
          Return m_SelStart
       End Get
       Set(value As StartEntity)
+         If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse Map.refStartMachPanelVM.bCPlaneObj_IsActive Then
+            NotifyPropertyChanged(NameOf(SelStart))
+            Return
+         End If
          m_SelStart = value
          EgtDeselectAll()
          If Not IsNothing(value) Then
@@ -293,6 +297,18 @@ Public Class StartMachPanelVM
       End Get
    End Property
 
+   Private m_StartList_IsEnabled As Boolean = False
+   Public ReadOnly Property StartList_IsEnabled As Boolean
+      Get
+         Return If(m_StartList.Count > 0, m_StartList_IsEnabled, False)
+      End Get
+   End Property
+   Friend Sub SetStartListIsEnabled(bValue As Boolean)
+      m_StartList_IsEnabled = bValue
+      NotifyPropertyChanged(NameOf(StartList_IsEnabled))
+   End Sub
+
+
    ' riferimento griglia all'ingresso in questa pagina
    Private m_OriginalGridFrame As New Frame3d
 
@@ -304,6 +320,8 @@ Public Class StartMachPanelVM
       End Get
    End Property
 
+   Private m_bEscOnLine2P As Boolean = False
+
 #Region "Tooltip"
 
    Public ReadOnly Property Point_ToolTip As String
@@ -458,6 +476,8 @@ Public Class StartMachPanelVM
          SelStart = m_StartList(0)
          NotifyPropertyChanged(NameOf(SelStart))
       End If
+      ' abilito lista start mach
+      SetStartListIsEnabled(True)
       Map.refSceneHostVM.MainScene.SetStatusNull()
    End Sub
 
@@ -481,16 +501,33 @@ Public Class StartMachPanelVM
       ' seleziono percorso corrente
       EgtDeselectAll()
       EgtSelectObj(m_SelStart.nId)
+      EgtDraw()
+      ' disattivo il resto dell'interfaccia
+      ManageInterface(False)
       Return True
    End Function
 
    Friend Sub UpdateUI()
       ' se attiva operazione in piu' passaggi, esco
       If Map.refSceneHostVM.MainController.GetContinue() Then Return
-      Dim NewEntity As StartEntity = Nothing
-      ' se finita creazione curva (è stata chiusa)
+   End Sub
+
+   Friend Sub OnExecCmdEnd(command As Controller.CMD)
+      m_bEscOnLine2P = False
+      Select Case command
+         Case Controller.CMD.LINE2P, Controller.CMD.DELETE, Controller.CMD.MODIFYCURVE, Controller.CMD.ADDPOINTCURVE, Controller.CMD.REMOVEPOINTCURVE,
+              Controller.CMD.MOVE, Controller.CMD.ROTATE
+            ' Imposto flag di ricalcolo slice
+            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
+            ' rimetto la selezione scena a null
+            Map.refSceneHostVM.MainScene.SetStatusNull()
+      End Select
+      ' riabilito interfaccia
+      ManageInterface(True)
+      ' se finita creazione curva
       If bIsCreatingPath Then
          m_bIsCreatingPath = False
+         Dim NewEntity As StartEntity = Nothing
          Dim nNewStartLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWSTART)
          Dim nNewEntityId As Integer = EgtGetFirstInGroup(nNewStartLayerId)
          Dim NewGeomType As GDB_TY = EgtGetType(nNewEntityId)
@@ -503,37 +540,22 @@ Public Class StartMachPanelVM
                   NewEntityType = StartMachTypes.COMPO
             End Select
             EgtSetName(nNewEntityId, START_GEOM)
-            ' coloro l'entita' di rosso
-            Dim c3Red As Color3d
-            c3Red.FromColor(System.Drawing.Color.Red)
-            EgtSetColor(nNewEntityId, c3Red)
+            ' resetto colore entita'
+            EgtResetColor(nNewEntityId)
             ' lo sposto nel layer degli start
             EgtRelocateGlob(nNewEntityId, m_nStartMachLayerId, GDB_POS.LAST_SON)
             ' lo aggiungo alla lista
             NewEntity = New StartEntity(nNewEntityId, NewEntityType)
             m_StartList.Add(NewEntity)
-            ' cancello layer di disegno
-            EgtErase(nNewStartLayerId)
+            ' lo seleziono
+            SelStart = NewEntity
+            NotifyPropertyChanged(NameOf(SelStart))
          End If
+         ' cancello layer di disegno
+         EgtErase(nNewStartLayerId)
       End If
       ' aggiorno posizione
       RefreshPos()
-      ' se aggiunta entita'
-      If Not IsNothing(NewEntity) Then
-         SelStart = NewEntity
-         NotifyPropertyChanged(NameOf(SelStart))
-      End If
-      ' rimetto la selezione scena a null
-      Map.refSceneHostVM.MainScene.SetStatusNull()
-   End Sub
-
-   Friend Sub OnExecCmdEnd(command As Controller.CMD)
-      Select Case command
-         Case Controller.CMD.LINE2P, Controller.CMD.DELETE, Controller.CMD.MODIFYCURVE, Controller.CMD.ADDPOINTCURVE, Controller.CMD.REMOVEPOINTCURVE,
-              Controller.CMD.MOVE, Controller.CMD.ROTATE
-            ' Imposto flag di ricalcolo slice
-            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
-      End Select
    End Sub
 
    Friend Sub OnKeyDown(Key As Forms.Keys)
@@ -550,6 +572,12 @@ Public Class StartMachPanelVM
             ' rimetto la selezione scena a null
             Map.refSceneHostVM.MainScene.SetStatusNull()
          End If
+         ' se esc su creazione percorso, lo annullo, altrimenti riabilito interfaccia
+         If m_bEscOnLine2P Then
+            m_bEscOnLine2P = False
+         Else
+            ManageInterface(True)
+         End If
       End If
    End Sub
 
@@ -565,6 +593,18 @@ Public Class StartMachPanelVM
       End If
    End Sub
 
+   Friend Sub ManageInterface(bValue As Boolean)
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(bValue)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(bValue)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(bValue)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(bValue)
+      Map.refInstrumentPanelVM.SetInstrumentPanelIsEnabled(bValue)
+      SetStartListIsEnabled(bValue)
+   End Sub
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -588,13 +628,13 @@ Public Class StartMachPanelVM
    ''' </summary>
    Public Sub Point(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
-      Dim nNewStartLayerId As Integer = EgtGetFirstNameInGroup( m_nPartId, LAY_NEWSTART)
+      ManageInterface(False)
+      Dim nNewStartLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWSTART)
       If nNewStartLayerId = GDB_ID.NULL Then
          nNewStartLayerId = EgtCreateGroup(m_nPartId)
          EgtSetName(nNewStartLayerId, LAY_NEWSTART)
       End If
       EgtSetCurrPartLayer(m_nPartId, nNewStartLayerId)
-      'InitCommand(True)
       If Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.POINT) Then
          m_bIsCreatingPath = True
       End If
@@ -621,7 +661,8 @@ Public Class StartMachPanelVM
    ''' </summary>
    Public Sub Line2P(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
-      Dim nNewStartLayerId As Integer = EgtGetFirstNameInGroup( m_nPartId, LAY_NEWSTART)
+      ManageInterface(False)
+      Dim nNewStartLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWSTART)
       If nNewStartLayerId = GDB_ID.NULL Then
          nNewStartLayerId = EgtCreateGroup(m_nPartId)
          EgtSetName(nNewStartLayerId, LAY_NEWSTART)
@@ -888,6 +929,7 @@ Public Class StartMachPanelVM
    ''' </summary>
    Public Sub CPlaneElevation(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ELEVATION)
    End Sub
 
@@ -912,6 +954,7 @@ Public Class StartMachPanelVM
    ''' </summary>
    Public Sub CPlaneOrigin(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ORIGIN)
    End Sub
 
@@ -952,6 +995,7 @@ Public Class StartMachPanelVM
    ''' </summary>
    Public Sub CPlaneObj(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       ' salvo selezione precedente e deseleziono altri oggetti
       m_PrevSelObjs.Clear()
       Dim nSelObjId As Integer = EgtGetFirstSelectedObj()
@@ -1012,6 +1056,7 @@ Public Class StartMachPanelVM
          End If
          NotifyPropertyChanged(NameOf(SelStart))
       End If
+      SetStartListIsEnabled(True)
    End Sub
 
 #End Region    ' Delete

Icarus/TSFEditor/TFSEditorV.xaml

@@ -264,7 +264,7 @@
                      </DataTemplate>
                   </DataGridTextColumn.HeaderTemplate>
                </DataGridTextColumn>
-               <DataGridTextColumn Header="FMin" 
+               <!--<DataGridTextColumn Header="FMin" 
                                    Binding="{Binding sFMin}"
                                    IsReadOnly="True"
                                    Visibility="{Binding DataContext.ColExtend_Visibility,
@@ -276,7 +276,7 @@
                                                MeasureUnit="{Binding DataContext.MmPerMin_Msg, RelativeSource={RelativeSource AncestorType={x:Type PrintApp:TFSEditorV}}}"/>
                      </DataTemplate>
                   </DataGridTextColumn.HeaderTemplate>
-               </DataGridTextColumn>
+               </DataGridTextColumn>-->
                <DataGridTextColumn Binding="{Binding sFTrg}"
                                    IsReadOnly="True"
                                    Visibility="{Binding DataContext.ColExtend_Visibility,

Icarus/TSFEditor/TFSEditorVM.vb

@@ -337,7 +337,7 @@ Public Class TFSEditorVM
 
    Public ReadOnly Property Seconds_Msg As String
       Get
-         Return "s"
+         Return "min:s"
       End Get
    End Property
 

Icarus/TopPanel/TopPanelV.xaml

@@ -58,7 +58,7 @@
       <ToggleButton x:Name="ModifyBtn"
                     Grid.Column="2"
                     Grid.Row="1"          
-                    Content="{Binding SelectedItem.sName, ElementName=ModifyModeListBox}"
+                    Content="{Binding SelModifyModeName}"
                     IsChecked="{Binding bModify_IsChecked}"  
                     Margin="2.5,0,2.5,0"
                     Style="{StaticResource TopPanel_Modify_ToggleButton}">

Icarus/TopPanel/TopPanelVM.vb

@@ -121,6 +121,7 @@ Public Class TopPanelVM
             Map.refLeftPanelVM.SetSelPanel(LeftPanelVM.Panels.NULL)
             NotifyPropertyChanged(NameOf(SelModifyMode))
          End If
+         NotifyPropertyChanged(NameOf(SelModifyModeName))
          ' chiudo il popup
          SetModifyIsChecked(False)
       End Set
@@ -128,8 +129,15 @@ Public Class TopPanelVM
    Friend Sub SetSelModifyMode(ModifyMode As ModifyModes)
       SelModifyMode = m_ModifyModeList.FirstOrDefault(Function(x) x.ModifyMode = ModifyMode)
       NotifyPropertyChanged(NameOf(SelModifyMode))
+      NotifyPropertyChanged(NameOf(SelModifyModeName))
    End Sub
 
+   Public ReadOnly Property SelModifyModeName As String
+      Get
+         Return If(Not IsNothing(m_SelModifyMode) AndAlso m_SelModifyMode.ModifyMode <> ModifyModes.NULL, m_SelModifyMode.sName, "Modify")
+      End Get
+   End Property
+
    Private m_bModify_IsChecked As Boolean
    Public Property bModify_IsChecked As Boolean
       Get
@@ -266,7 +274,27 @@ Public Class TopPanelVM
             WriteMainPrivateProfileString(S_PRINTING3D, K_CURRMACHINING, value.sGUID.ToString())
             ' imposto selezionata come corrente
             If Not IsNothing(m_SelPart) AndAlso (IsNothing(m_SelMachining) OrElse value.sGUID <> m_SelMachining.sGUID) Then
+               Dim GeneralCathegory As MachiningCathegory = Map.refTopPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL)
+               Dim OldSlicingTypeValue As Machining.MPAR_SLICINGTYPE = Nothing
+               Dim NewSlicingTypeValue As Machining.MPAR_SLICINGTYPE = Nothing
+               If Not IsNothing(GeneralCathegory) Then
+                  Dim SlicingTypeParam As ComboMachiningParam = GeneralCathegory.MachiningParamList.FirstOrDefault(Function(x) x.Type = MachiningParam.Params.SLICINGTYPE)
+                  If Not IsNothing(SlicingTypeParam) Then
+                     OldSlicingTypeValue = SlicingTypeParam.SelValue.Id
+                  End If
+               End If
                Map.refCurrMachiningPanelVM.SetCurrMachining(New CurrMachining(m_SelPart.nPartId, value.nIndex))
+               GeneralCathegory = Map.refTopPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL)
+               If Not IsNothing(GeneralCathegory) Then
+                  Dim SlicingTypeParam As ComboMachiningParam = GeneralCathegory.MachiningParamList.FirstOrDefault(Function(x) x.Type = MachiningParam.Params.SLICINGTYPE)
+                  If Not IsNothing(SlicingTypeParam) Then
+                     NewSlicingTypeValue = SlicingTypeParam.SelValue.Id
+                  End If
+               End If
+               If IsNothing(OldSlicingTypeValue) OrElse IsNothing(NewSlicingTypeValue) OrElse OldSlicingTypeValue <> NewSlicingTypeValue Then
+                  ' aggiorno area di estrusione
+                  CurrentMachine.UpdateExtrusionArea()
+               End If
             End If
          End If
          m_SelMachining = value
@@ -744,7 +772,8 @@ Public Class TopPanelVM
    Public Sub Machining()
       If IsNothing(m_SelPart) OrElse IsNothing(CurrMachining) Then Return
       If IsNothing(m_SelMachining) Then
-         MessageBox.Show("Select current Db Machining first!", "Warning", MessageBoxButton.OK, MessageBoxImage.Exclamation)
+         'MessageBox.Show("Select current Db Machining first!", "Warning", MessageBoxButton.OK, MessageBoxImage.Exclamation)
+         EgtMessageBoxV.Show(Application.Current.MainWindow, "Select current Db Machining first!", "Warning", MessageBoxButton.OK, MessageBoxImage.Exclamation)
          Return
       End If
       SelPage = Pages.CURRMACHINING

Icarus/Utility/CurrentMachine.vb

@@ -79,6 +79,14 @@ Public Module CurrentMachine
       End Get
    End Property
 
+   ' altezza massima di estrusione impostata in file ini macchina
+   Private m_dSlicingMaxHeight As Double
+   Public ReadOnly Property dSlicingMaxHeight As Double
+      Get
+         Return m_dSlicingMaxHeight
+      End Get
+   End Property
+
 #Region "Init"
 
    Sub InitCurrentMachine(sMachinesRootDir As String, sMachineName As String)
@@ -97,6 +105,8 @@ Public Module CurrentMachine
       m_sMachiningFilePath = sMachinesRootDir & "\" & sMachineName & "\Machinings\Machinings.ini"
       ' impostazione cartella materiali
       m_sMaterialFilePath = sMachinesRootDir & "\" & sMachineName & "\Materials\Materials.ini"
+      ' leggo altezza massima estrusione impostata su macchina
+      m_dSlicingMaxHeight = GetPrivateProfileDouble(S_MACH_PRINTING3D, K_MAX_HEIGHT, 900, m_sMachIniFile)
       ' Disabilito segnalazione modificato
       Dim DisableMgr As New DisableModifiedMgr
       ' recupero box macchina
@@ -147,18 +157,24 @@ Public Module CurrentMachine
    End Sub
 
    Public Sub UpdateExtrusionArea()
+      Dim DisableMgr As New DisableModifiedMgr
       ' recupero eventuale vecchia area di estrusione
       Dim nTabPartId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, TABLE)
       Dim nTabLayerId As Integer = EgtGetFirstNameInGroup(nTabPartId, TABLE)
       Dim nExtrusionAreaId As Integer = EgtGetFirstNameInGroup(nTabLayerId, EXTRUSION_AREA)
-      If nExtrusionAreaId <> GDB_ID.NULL Then
-         ' e la cancello
-         EgtErase(nExtrusionAreaId)
-      End If
+      If nExtrusionAreaId <> GDB_ID.NULL Then EgtErase(nExtrusionAreaId)
+      Dim nExtrusionRectId As Integer = EgtGetFirstNameInGroup(nTabLayerId, EXTRUSION_RECT)
+      If nExtrusionRectId <> GDB_ID.NULL Then EgtErase(nExtrusionRectId)
       ' se lavorazione corrente nulla, esco
-      If IsNothing(Map.refTopPanelVM.CurrMachining) Then Return
+      If IsNothing(Map.refTopPanelVM.CurrMachining) Then
+         DisableMgr.ReEnable() 
+         Return
+      End If
       ' se non esiste file dati macchina, esco
-      If String.IsNullOrWhiteSpace(m_sMachDataIniFile) Then Return
+      If String.IsNullOrWhiteSpace(m_sMachDataIniFile) Then
+         DisableMgr.ReEnable()
+         Return
+      End If
       ' recupero tipo di slice
       Dim sExtrusionType As String = S_VERTICAL
       Dim GeneralCathegory As MachiningCathegory = Map.refTopPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL)
@@ -178,12 +194,19 @@ Public Module CurrentMachine
       Dim dExtrXMin = GetPrivateProfileDouble(sExtrusionType, K_MINX, 0, m_sMachDataIniFile)
       Dim dExtrYMax = GetPrivateProfileDouble(sExtrusionType, K_MAXY, 0, m_sMachDataIniFile)
       Dim dExtrYMin = GetPrivateProfileDouble(sExtrusionType, K_MINY, 0, m_sMachDataIniFile)
-      nExtrusionAreaId = EgtCreateRectangle2P(nTabLayerId, New Point3d(dExtrXMin, dExtrYMin, 0), New Point3d(dExtrXMax, dExtrYMax, 0))
+      Const AREA_WIDTH As Double = 10
+      Dim nAuxRectId As Integer = EgtCreateRectangle2P(nTabLayerId, New Point3d(dExtrXMin - AREA_WIDTH, dExtrYMin - AREA_WIDTH, 0), New Point3d(dExtrXMax + AREA_WIDTH, dExtrYMax + AREA_WIDTH, 0))
+      nExtrusionRectId = EgtCreateRectangle2P(nTabLayerId, New Point3d(dExtrXMin, dExtrYMin, 0), New Point3d(dExtrXMax, dExtrYMax, 0))
+      nExtrusionAreaId = EgtCreateSurfTmByRegion( nTabLayerId, { nAuxRectId, nExtrusionRectId}, EPS_STM)
+      EgtErase( nAuxRectId)
       Dim c3Temp As New Color3d
       c3Temp.FromColor(System.Drawing.Color.Lime)
       EgtSetColor(nExtrusionAreaId, c3Temp)
       EgtSetName(nExtrusionAreaId, EXTRUSION_AREA)
+      EgtSetColor(nExtrusionRectId, c3Temp)
+      EgtSetName(nExtrusionRectId, EXTRUSION_RECT)
       m_b3ExtrusionArea = New BBox3d(New Point3d(dExtrXMin, dExtrYMin, 0), New Point3d(dExtrXMax, dExtrYMax, 0))
+      DisableMgr.ReEnable()
       EgtDraw()
    End Sub
 

Icarus/Utility/Dictionary.xaml

@@ -3,7 +3,6 @@
                     xmlns:PrintApp="clr-namespace:Icarus"
                     xmlns:Themes="clr-namespace:Microsoft.Windows.Themes;assembly=PresentationFramework.Aero2"
                     xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
-                    xmlns:EgtWPFLib48="clr-namespace:EgtWPFLib48;assembly=EgtWPFLib48"
                     xmlns:EgtFloating="clr-namespace:EgtWPFLib5.EgtFloating;assembly=EgtWPFLib5"
                     xmlns:sys="clr-namespace:System;assembly=mscorlib"
 >
@@ -932,7 +931,9 @@
 
    <Style x:Key="ParameterList_TextBox" TargetType="{x:Type TextBox}" BasedOn="{StaticResource BaseTextBox}">
       <Setter Property="TextAlignment" Value="Center"/>
+      <Setter Property="HorizontalAlignment" Value="Stretch"/>
    </Style>
+   
    <Style x:Key="ParameterList_TextBox2" TargetType="{x:Type EgtWPFLib5:EgtTextBox2}" BasedOn="{StaticResource {x:Type EgtWPFLib5:EgtTextBox2}}">
       <Setter Property="TextAlignment" Value="Center"/>
       <Setter Property="ExplicitUpdateSource" Value="EnterKeyPressOrLostFocus"/>
@@ -4410,7 +4411,8 @@
                               <ColumnDefinition Width="Auto"/>
                            </Grid.ColumnDefinitions>
 
-                           <TextBlock Text="{TemplateBinding Title}" 
+                           <TextBlock x:Name="PART_MoveRectangle"
+                                      Text="{TemplateBinding Title}" 
                                       Grid.Column="1"
                                       TextTrimming="CharacterEllipsis"
                                       HorizontalAlignment="Stretch" 
@@ -4701,6 +4703,11 @@
    </Style>
 
    -->
+
+   <Style x:Key="EgtManageFile_DataGridColumnHeader" TargetType="DataGridColumnHeader">
+      <Setter Property="HorizontalContentAlignment" Value="Left"/>
+   </Style>
+   
    <!-- ______________________________________________________________________________________________________________________________________________ -->
 
 </ResourceDictionary>

Icarus/ViewLayerManager/ViewLayerManagerVM.vb

@@ -150,8 +150,8 @@ Public Class ViewLayer
    End Sub
 
    Friend Sub UpdateVisibility(bIsVisible As Boolean)
-      ' Disabilito segnalazione modificato
-      Dim DisableMgr As New DisableModifiedMgr ' se solidi
+      Dim DisableMgr As New DisableModifiedMgr
+      ' se solidi
       If m_Type = ViewLayerType.SOLID_SLICE Then
          If Map.refSceneHostVM.MainController.GetStep() = 0 Then
             ' aggiorno parametro di calcolo solidi sui pezzi
@@ -242,7 +242,6 @@ Public Class ViewLayer
             Next
          Next
       End If
-      ' Ripristino stato segnalazione modifica
       DisableMgr.ReEnable()
    End Sub