- aggiunta indicazione parametri beta

- aggiunto parametro SlicingHeight
- corretti alcuni testi parametri

Icarus/Constants/Const3dPrint.vb

@@ -108,6 +108,7 @@
    Public Const MAC_PREFLOWDELAY = "PreFlowDelay"
    Public Const MAC_POSTFLOWDELAY = "PostFlowDelay"
    Public Const MAC_SCREWBACK = "ScrewBack"
+   Public Const MAC_SLICINGHEIGHT = "SlicingHeight"
    Public Const MAC_RIBSTYPE = "RibsType"
    Public Const MAC_RIBSOVERLAP = "RibsOverlap"
    Public Const MAC_RIBSSTRANDCOUNT = "RibsStrandCount"
@@ -129,13 +130,35 @@
    Public Const MAC_SHELLNBRWIPEDIR = "ShellNbrWipeDir"
    Public Const MAC_AUXSOLIDSOVERLAP = "AuxSolidsOverlap"
    Public Const MAC_AUXSOLIDSINFILL = "AuxSolidsInfill"
+   Public Const MAC_AUXSOLIDSINFILLLINK = "AuxSolidsInfillLink"
+   Public Const MAC_AUXSOLIDSSTRANDCOUNT = "AuxSolidsStrandCount"
    Public Const MAC_AUXSOLIDSSTRANDORDER = "AuxSolidsStrandOrder"
    Public Const MAC_AUXSOLIDSLINKTYPE = "AuxSolidsLinkType"
    Public Const MAC_AUXSOLIDSLINKPARAM = "AuxSolidsLinkParam"
    Public Const MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE = "AuxSolidsStartPointOffsetOnSlice"
+   Public Const MAC_AUXSOLIDSOFFSETLEADPOINT = "AuxSolidsOffsetLeadPoint"
+   Public Const MAC_AUXSOLIDSDENSITY = "AuxSolidsDensity"
+   Public Const MAC_AUXSOLIDSGRIDOVERLAP = "AuxSolidsGridOverlap"
+   Public Const MAC_AUXSOLIDSDIRECTION = "AuxSolidsDirection"
+   Public Const MAC_AUXSOLIDSOFFSETX = "AuxSolidsOffsetX"
+   Public Const MAC_AUXSOLIDSOFFSETY = "AuxSolidsOffsetY"
    Public Const MAC_AUXSOLIDSCOASTINGLEN = "AuxSolidsCoastingLen"
    Public Const MAC_AUXSOLIDSWIPELEN = "AuxSolidsWipeLen"
    Public Const MAC_AUXSOLIDSWIPEDIR = "AuxSolidsWipeDir"
+   Public Const MAC_FLOORTYPE = "FloorType"
+   Public Const MAC_CEILCOUNT = "CeilCount"
+   Public Const MAC_CEILTYPE = "CeilType"
+   Public Const MAC_INFILLTYPE = "InfillType"
+   Public Const MAC_INFILLLINK = "InfillLink"
+   Public Const MAC_INFILLDENSITY = "InfillDensity"
+   Public Const MAC_INFILLOVERLAP = "InfillOverlap"
+   Public Const MAC_INFILLGRIDOVERLAP = "InfillGridOverlap"
+   Public Const MAC_INFILLDIRECTION = "InfillDirection"
+   Public Const MAC_INFILLOFFSETX = "InfillOffsetX"
+   Public Const MAC_INFILLOFFSETY = "InfillOffsetY"
+   Public Const MAC_INFILLCOASTING = "InfillCoasting"
+   Public Const MAC_INFILLWIPE = "InfillWipe"
+   Public Const MAC_INFILLWIPEDIR = "InfillWipeDir"
    Public Const MAC_DYNAMICMODE = "DynamicMode"
    Public Const MAC_PRINTORDER = "PrintOrder"
    Public Const MAC_CONSTANT = "Constant"

Icarus/Constants/ConstGen.vb

@@ -21,6 +21,7 @@ Public Module ConstGen
    ' File con dati di licenza
    Public Const LIC_FILE_NAME As String = "Icarus.lic"
    Public Const S_LICENCE As String = "Licence"
+   Public Const K_LOCKID As String = "LockId"
    Public Const K_KEY As String = "Key"
    Public Const K_NESTKEY As String = "NestKey"
 

Icarus/Constants/ConstIni.vb

@@ -26,6 +26,7 @@ Public Module ConstIni
    'Public Const K_MESSAGES As String = "Messages"
    'Public Const K_WINPLACE As String = "WinPlace"
    'Public Const K_LASTPROJ As String = "LastProj"
+   Public Const K_NETKEY As String = "NetKey"
    Public Const K_LASTNGEDIR As String = "LastNgeDir"
    Public Const K_LASTIMPDIR As String = "LastImpDir"
    'Public Const K_SUPPORT As String = "Support"

Icarus/Constants/ConstMachIni.vb

@@ -10,6 +10,7 @@
    Public Const K_SLICINGTYPE As String = "SlicingType"
    Public Const K_SPEED_MIN As String = "SpeedMin"
    Public Const K_SPEED_MAX As String = "SpeedMax"
+   Public Const K_MAX_HEIGHT As String = "HMax"
 
    Public Const S_MINMAX As String = "MinMax"
 

Icarus/CurrMachiningPanel/CurrMachining.vb

@@ -111,6 +111,7 @@ Public Class CurrMachining
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.RIBS, nPartId, m_nIndex, False))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.SHELL_NUMBER, nPartId, m_nIndex, False))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.AUX_SOLID, nPartId, m_nIndex, False))
+      m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.INFILL, nPartId, m_nIndex, False))
       For Each Cathegory In m_CathegoryList
          For Each MachiningParam In Cathegory.MachiningParamList
             AddHandler MachiningParam.PropertyChanged, AddressOf OnMachiningParamPropertyChanged
@@ -128,6 +129,7 @@ Public Class CurrMachining
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.RIBS, nPartId, m_nIndex, True))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.SHELL_NUMBER, nPartId, m_nIndex, True))
       m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.AUX_SOLID, nPartId, m_nIndex, True))
+      m_CathegoryList.Add(New CurrMachiningCathegory(MachiningCathegory.Cathegories.INFILL, nPartId, m_nIndex, True))
       For Each Cathegory In m_CathegoryList
          For Each MachiningParam In Cathegory.MachiningParamList
             AddHandler MachiningParam.PropertyChanged, AddressOf OnMachiningParamPropertyChanged
@@ -209,7 +211,6 @@ Public Class CurrMachiningCathegory
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.STARTPOINTOFFSETONSLICE, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.STRANDORDER, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.DIRECTION, nPartId, nIndex, bForceFromDb, Me),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.G0FEED, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.G0FEEDZ, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.LINKZUP, nPartId, nIndex, bForceFromDb, Me),
@@ -219,7 +220,8 @@ Public Class CurrMachiningCathegory
                                                                 New CurrOrderedMachiningParam(MachiningParam.Params.PRINT_ORDER, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.PREFLOWDELAY, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.POSTFLOWDELAY, nPartId, nIndex, bForceFromDb, Me),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.SCREWBACK, nPartId, nIndex, bForceFromDb, Me)})
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.SCREWBACK, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.SLICINGHEIGHT, nPartId, nIndex, bForceFromDb, Me)})
          Case Cathegories.LINK
             m_sName = "Shell"
             m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.LINKTYPE, nPartId, nIndex, bForceFromDb, Me),
@@ -261,20 +263,45 @@ Public Class CurrMachiningCathegory
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.SHELLNBRWIPEDIR, nPartId, nIndex, bForceFromDb, Me)})
          Case Cathegories.AUX_SOLID
             m_sName = "Filled Solid"
-            m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nPartId, nIndex, bForceFromDb, Me),
-                                                                New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nPartId, nIndex, bForceFromDb, Me),
+            m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.AUXSOLIDSINFILLLINK, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDCOUNT, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETLEADPOINT, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSDENSITY, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSGRIDOVERLAP, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSDIRECTION, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETX, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETY, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSCOASTINGLEN, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPELEN, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPEDIR, nPartId, nIndex, bForceFromDb, Me)})
+         Case Cathegories.INFILL
+            m_sName = "Infill"
+            m_MachiningParamList = New List(Of MachiningParam)({New CurrNumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrComboMachiningParam(MachiningParam.Params.FLOORTYPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.CEILCOUNT, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrComboMachiningParam(MachiningParam.Params.CEILTYPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrComboMachiningParam(MachiningParam.Params.INFILLTYPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.INFILLLINK, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLDENSITY, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLGRIDOVERLAP, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLDIRECTION, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLOFFSETX, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLOFFSETY, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLOVERLAP, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLCOASTING, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLWIPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.INFILLWIPEDIR, nPartId, nIndex, bForceFromDb, Me)})
       End Select
       ' verifico dipendenze tra parametri
       Select Case m_Type
          Case Cathegories.LINK
-            For Each Param In {MachiningParam.Params.LINKTYPE, MachiningParam.Params.LEADIN}
+            For Each Param In {MachiningParam.Params.LINKTYPE, MachiningParam.Params.LEADIN, MachiningParam.Params.LEADOUT}
                Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
                MachiningParam.ManageDependencyParam()
             Next
@@ -288,6 +315,19 @@ Public Class CurrMachiningCathegory
                Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
                MachiningParam.ManageDependencyParam()
             Next
+            For Each Param In {MachiningParam.Params.AUXSOLIDSSTRANDCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
+         Case Cathegories.INFILL
+            For Each Param In {MachiningParam.Params.FLOORCOUNT, MachiningParam.Params.CEILCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
+            For Each Param In {MachiningParam.Params.INFILLTYPE}
+               Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
       End Select
    End Sub
 
@@ -328,6 +368,7 @@ Public Class CurrNumericMachiningParam
          End If
          NotifyPropertyChanged(NameOf(sValue))
          NotifyPropertyChanged(NameOf(bIsModifiedFromDb))
+         ManageDependencyParam()
       End Set
    End Property
 
@@ -426,6 +467,9 @@ Public Class CurrNumericMachiningParam
          Case Params.SCREWBACK
             bReadFromPart = EgtGetInfo(nPartId, MAC_SCREWBACK, m_dValue)
             m_bIsLen = True
+         Case Params.SLICINGHEIGHT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_SLICINGHEIGHT, m_dValue)
+            m_bIsLen = True
          Case Params.RIBSOVERLAP
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSOVERLAP, m_dValue)
             m_bIsLen = False
@@ -465,9 +509,30 @@ Public Class CurrNumericMachiningParam
          Case Params.AUXSOLIDSLINKPARAM
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSLINKPARAM, m_dValue)
             m_bIsLen = True
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSSTRANDCOUNT, m_dValue)
+            m_bIsLen = False
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, m_dValue)
             m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETLEADPOINT, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSDENSITY
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSDENSITY, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSGRIDOVERLAP, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSDIRECTION
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSDIRECTION, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETX
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETX, m_dValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETY
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETY, m_dValue)
+            m_bIsLen = True
          Case Params.AUXSOLIDSCOASTINGLEN
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSCOASTINGLEN, m_dValue)
             m_bIsLen = True
@@ -480,13 +545,43 @@ Public Class CurrNumericMachiningParam
          Case Params.FLOWRATE_PC
             bReadFromPart = EgtGetInfo(nPartId, MAC_CONSTANT, m_dValue)
             m_bIsLen = False
+         Case Params.CEILCOUNT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_CEILCOUNT, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLDENSITY
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLDENSITY, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLOVERLAP
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLOVERLAP, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLGRIDOVERLAP
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLGRIDOVERLAP, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLDIRECTION
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLDIRECTION, m_dValue)
+            m_bIsLen = False
+         Case Params.INFILLOFFSETX
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLOFFSETX, m_dValue)
+            m_bIsLen = True
+         Case Params.INFILLOFFSETY
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLOFFSETY, m_dValue)
+            m_bIsLen = True
+         Case Params.INFILLCOASTING
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLCOASTING, m_dValue)
+            m_bIsLen = True
+         Case Params.INFILLWIPE
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLWIPE, m_dValue)
+            m_bIsLen = True
+         Case Params.INFILLWIPEDIR
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLWIPEDIR, m_dValue)
+            m_bIsLen = False
       End Select
       m_dOrigValue = m_dValue
       If nIndex > 0 Then
          Dim DbMachining As Machining = Map.refMachiningDbVM.MachiningList.FirstOrDefault(Function(x) x.nIndex = nIndex)
          Select Case Type
             Case Params.STRANDH, Params.STRANDW, Params.STRANDCOUNT, Params.OFFSET, Params.STRANDOVERLAP, Params.STARTPOINTOFFSETONSLICE,
-                 Params.FLOORCOUNT, Params.G0FEED, Params.G0FEEDZ, Params.LINKZUP, Params.TOOLDIAM, Params.FLOWRATE_PC, Params.PREFLOWDELAY, Params.POSTFLOWDELAY, Params.SCREWBACK
+                 Params.G0FEED, Params.G0FEEDZ, Params.LINKZUP, Params.TOOLDIAM, Params.FLOWRATE_PC, Params.PREFLOWDELAY, Params.POSTFLOWDELAY, Params.SCREWBACK, Params.SLICINGHEIGHT
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.LINKPARAM, Params.OFFSETLEADPOINT, Params.LEADINTANGDIST, Params.LEADINORTHODIST,
                  Params.LEADOUTTANGDIST, Params.LEADOUTORTHODIST, Params.COASTINGLEN, Params.COASTINGFEED_PC,
@@ -499,8 +594,14 @@ Public Class CurrNumericMachiningParam
             Case Params.SHELLNBRDIFFERENCE, Params.SHELLNBRCOASTING, Params.SHELLNBRWIPE, Params.SHELLNBRWIPEDIR
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.SHELL_NUMBER).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.AUXSOLIDSOVERLAP, Params.AUXSOLIDSLINKPARAM, Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE,
-                 Params.AUXSOLIDSCOASTINGLEN, Params.AUXSOLIDSWIPELEN, Params.AUXSOLIDSWIPEDIR
+                 Params.AUXSOLIDSOFFSETLEADPOINT, Params.AUXSOLIDSDENSITY, Params.AUXSOLIDSGRIDOVERLAP,
+                 Params.AUXSOLIDSDIRECTION, Params.AUXSOLIDSOFFSETX, Params.AUXSOLIDSOFFSETY,
+                 Params.AUXSOLIDSCOASTINGLEN, Params.AUXSOLIDSWIPELEN, Params.AUXSOLIDSWIPEDIR, Params.AUXSOLIDSSTRANDCOUNT
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.FLOORCOUNT, Params.CEILCOUNT, Params.INFILLDENSITY, Params.INFILLOVERLAP,
+                 Params.INFILLGRIDOVERLAP, Params.INFILLDIRECTION, Params.INFILLOFFSETX,
+                 Params.INFILLOFFSETY, Params.INFILLCOASTING, Params.INFILLWIPE, Params.INFILLWIPEDIR
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.INFILL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
          If bForceFromDb OrElse Not bReadFromPart Then
             m_dValue = m_DbParam.dOrigValue
@@ -573,6 +674,8 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_POSTFLOWDELAY, sWriteValue)
          Case Params.SCREWBACK
             EgtSetInfo(nPartId, MAC_SCREWBACK, sWriteValue)
+         Case Params.SLICINGHEIGHT
+            EgtSetInfo(nPartId, MAC_SLICINGHEIGHT, sWriteValue)
          Case Params.RIBSOVERLAP
             EgtSetInfo(nPartId, MAC_RIBSOVERLAP, sWriteValue)
          Case Params.RIBSSTRANDCOUNT
@@ -595,12 +698,26 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_SHELLNBRWIPE, sWriteValue)
          Case Params.SHELLNBRWIPEDIR
             EgtSetInfo(nPartId, MAC_SHELLNBRWIPEDIR, sWriteValue)
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSSTRANDCOUNT, sWriteValue)
          Case Params.AUXSOLIDSOVERLAP
             EgtSetInfo(nPartId, MAC_AUXSOLIDSOVERLAP, sWriteValue)
          Case Params.AUXSOLIDSLINKPARAM
             EgtSetInfo(nPartId, MAC_AUXSOLIDSLINKPARAM, sWriteValue)
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             EgtSetInfo(nPartId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, sWriteValue)
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSOFFSETLEADPOINT, sWriteValue)
+         Case Params.AUXSOLIDSDENSITY
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSDENSITY, sWriteValue)
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSGRIDOVERLAP, sWriteValue)
+         Case Params.AUXSOLIDSDIRECTION
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSDIRECTION, sWriteValue)
+         Case Params.AUXSOLIDSOFFSETX
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSOFFSETX, sWriteValue)
+         Case Params.AUXSOLIDSOFFSETY
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSOFFSETY, sWriteValue)
          Case Params.AUXSOLIDSCOASTINGLEN
             EgtSetInfo(nPartId, MAC_AUXSOLIDSCOASTINGLEN, sWriteValue)
          Case Params.AUXSOLIDSWIPELEN
@@ -609,6 +726,26 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_AUXSOLIDSWIPEDIR, sWriteValue)
          Case Params.FLOWRATE_PC
             EgtSetInfo(nPartId, MAC_CONSTANT, sWriteValue)
+         Case Params.CEILCOUNT
+            EgtSetInfo(nPartId, MAC_CEILCOUNT, sWriteValue)
+         Case Params.INFILLDENSITY
+            EgtSetInfo(nPartId, MAC_INFILLDENSITY, sWriteValue)
+         Case Params.INFILLOVERLAP
+            EgtSetInfo(nPartId, MAC_INFILLOVERLAP, sWriteValue)
+         Case Params.INFILLGRIDOVERLAP
+            EgtSetInfo(nPartId, MAC_INFILLGRIDOVERLAP, sWriteValue)
+         Case Params.INFILLDIRECTION
+            EgtSetInfo(nPartId, MAC_INFILLDIRECTION, sWriteValue)
+         Case Params.INFILLOFFSETX
+            EgtSetInfo(nPartId, MAC_INFILLOFFSETX, sWriteValue)
+         Case Params.INFILLOFFSETY
+            EgtSetInfo(nPartId, MAC_INFILLOFFSETY, sWriteValue)
+         Case Params.INFILLCOASTING
+            EgtSetInfo(nPartId, MAC_INFILLCOASTING, sWriteValue)
+         Case Params.INFILLWIPE
+            EgtSetInfo(nPartId, MAC_INFILLWIPE, sWriteValue)
+         Case Params.INFILLWIPEDIR
+            EgtSetInfo(nPartId, MAC_INFILLWIPEDIR, sWriteValue)
       End Select
    End Sub
 
@@ -811,9 +948,14 @@ Public Class CurrComboMachiningParam
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSTYPE, nSelValue)
             m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
          Case Params.AUXSOLIDSINFILL
-            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL.NONE, "None"),
-                                                     New IdNameStruct(Machining.MPAR_INFILL.OFFSET, "Offset"),
-                                                     New IdNameStruct(Machining.MPAR_INFILL.ZIGZAG, "ZigZag")})
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
             Dim nSelValue As Integer = 0
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSINFILL, nSelValue)
             m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
@@ -836,6 +978,28 @@ Public Class CurrComboMachiningParam
             Dim nSelValue As Integer = 0
             bReadFromPart = EgtGetInfo(nPartId, MAC_DYNAMICMODE, nSelValue)
             m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+         Case Params.FLOORTYPE
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag")})
+            Dim nSelValue As Integer = 0
+            bReadFromPart = EgtGetInfo(nPartId, MAC_FLOORTYPE, nSelValue)
+            m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+         Case Params.CEILTYPE
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag")})
+            Dim nSelValue As Integer = 0
+            bReadFromPart = EgtGetInfo(nPartId, MAC_CEILTYPE, nSelValue)
+            m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
+         Case Params.INFILLTYPE
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
+            Dim nSelValue As Integer = 0
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLTYPE, nSelValue)
+            m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = nSelValue)
       End Select
       m_OrigSelValue = m_SelValue
       If nIndex > 0 Then
@@ -849,6 +1013,8 @@ Public Class CurrComboMachiningParam
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.RIBS).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.AUXSOLIDSINFILL, Params.AUXSOLIDSSTRANDORDER, Params.AUXSOLIDSLINKTYPE
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.FLOORTYPE, Params.CEILTYPE, Params.INFILLTYPE
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.INFILL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
          If bForceFromDb OrElse Not bReadFromPart Then
             m_SelValue = m_DbParam.OrigSelValue
@@ -887,6 +1053,12 @@ Public Class CurrComboMachiningParam
             EgtSetInfo(nPartId, MAC_AUXSOLIDSLINKTYPE, m_SelValue.Id)
          Case Params.DYNAMIC_MODE
             EgtSetInfo(nPartId, MAC_DYNAMICMODE, m_SelValue.Id)
+         Case Params.FLOORTYPE
+            EgtSetInfo(nPartId, MAC_FLOORTYPE, m_SelValue.Id)
+         Case Params.CEILTYPE
+            EgtSetInfo(nPartId, MAC_CEILTYPE, m_SelValue.Id)
+         Case Params.INFILLTYPE
+            EgtSetInfo(nPartId, MAC_INFILLTYPE, m_SelValue.Id)
       End Select
    End Sub
 
@@ -976,6 +1148,10 @@ Public Class CurrCheckMachiningParam
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLEADOUTINVERT, m_bValue)
          Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, m_bValue)
+         Case Params.AUXSOLIDSINFILLLINK
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSINFILLLINK, m_bValue)
+         Case Params.INFILLLINK
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLLINK, m_bValue)
       End Select
       m_bOrigValue = m_bValue
       If nIndex > 0 Then
@@ -985,6 +1161,10 @@ Public Class CurrCheckMachiningParam
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.RIBSLINK, Params.RIBSINVERTORDER, Params.RIBSINVERTDIRECTION, Params.RIBSINVERTSTRANDORDER, Params.RIBSLEADININVERT, Params.RIBSLEADOUTINVERT, Params.RIBSLIMITUNBOUNDEDWITHSOLID
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.RIBS).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.AUXSOLIDSINFILLLINK
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.INFILLLINK
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.INFILL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
          If bForceFromDb OrElse Not bReadFromPart Then
             m_bValue = m_DbParam.bOrigValue
@@ -1011,6 +1191,10 @@ Public Class CurrCheckMachiningParam
             EgtSetInfo(nPartId, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0))
          Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
             EgtSetInfo(nPartId, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, If(m_bValue, 1, 0))
+         Case Params.AUXSOLIDSINFILLLINK
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSINFILLLINK, If(m_bValue, 1, 0))
+         Case Params.INFILLLINK
+            EgtSetInfo(nPartId, MAC_INFILLLINK, If(m_bValue, 1, 0))
       End Select
    End Sub
 

Icarus/CurrMachiningPanel/CurrMachiningPanelV.xaml

@@ -54,9 +54,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="Auto"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <EgtWPFLib5:EgtTextBox2 Grid.Column="1"
                                                             Text="{Binding sValue, UpdateSourceTrigger=Explicit}"
                                                             Margin="2.5,0,2.5,0"
@@ -79,9 +86,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="Auto"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <ComboBox Grid.Column="1"
                                               ItemsSource="{Binding ValueList}"
                                               SelectedItem="{Binding SelValue}"
@@ -107,9 +121,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="Auto"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <CheckBox Grid.Column="1"
                                               IsChecked="{Binding bValue}"
                                               HorizontalAlignment="Center"

Icarus/FilledSolidPanel/FilledSolidPanelVM.vb

@@ -35,6 +35,10 @@ Public Class FilledSolidPanelVM
          Return m_SelFilledSolid
       End Get
       Set(value As FilledSolidEntity)
+         If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse Map.refFilledSolidPanelVM.bCPlaneObj_IsActive Then
+            NotifyPropertyChanged(NameOf(SelFilledSolid))
+            Return
+         End If
          m_SelFilledSolid = value
          EgtDeselectAll()
          If Not IsNothing(value) Then
@@ -349,6 +353,8 @@ Public Class FilledSolidPanelVM
             NotifyPropertyChanged(NameOf(bRotate_IsChecked))
             Map.refRightPanelVM.SetSelPanel(RightPanelVM.Panels.AUXSOLIDPARAM)
             NotifyPropertyChanged(NameOf(FilledSolidList_IsEnabled))
+            ' disattivo interfaccia
+            ManageInterface(False)
          Else
             NotifyPropertyChanged(NameOf(m_bMachParam_IsChecked))
          End If
@@ -358,6 +364,8 @@ Public Class FilledSolidPanelVM
       m_bMachParam_IsChecked = False
       NotifyPropertyChanged(NameOf(bMachParam_IsChecked))
       NotifyPropertyChanged(NameOf(FilledSolidList_IsEnabled))
+      ' riattivo interfaccia
+      ManageInterface(True)
    End Sub
 
    Public ReadOnly Property Compo_Visibility As Visibility
@@ -366,11 +374,17 @@ Public Class FilledSolidPanelVM
       End Get
    End Property
 
+   Private m_FilledSolidList_IsEnabled As Boolean = False
    Public ReadOnly Property FilledSolidList_IsEnabled As Boolean
       Get
-         Return Not m_bMachParam_IsChecked
+         Return If(m_FilledSolidList.Count > 0, m_FilledSolidList_IsEnabled, False)
       End Get
    End Property
+   Friend Sub SetFilledSolidListIsEnabled(bValue As Boolean)
+      m_FilledSolidList_IsEnabled = bValue
+      NotifyPropertyChanged(NameOf(FilledSolidList_IsEnabled))
+   End Sub
+
    ' riferimento griglia all'ingresso in questa pagina
    Private m_OriginalGridFrame As New Frame3d
 
@@ -388,6 +402,8 @@ Public Class FilledSolidPanelVM
       End Get
    End Property
 
+   Private m_bEscOnLine2P As Boolean = False
+
 #Region "Tooltip"
 
    Public ReadOnly Property Import_ToolTip As String
@@ -571,6 +587,8 @@ Public Class FilledSolidPanelVM
          SelFilledSolid = m_FilledSolidList(0)
          NotifyPropertyChanged(NameOf(SelFilledSolid))
       End If
+      ' attivo lista filled solid
+      SetFilledSolidListIsEnabled(True)
       Map.refSceneHostVM.MainScene.SetStatusNull()
    End Sub
 
@@ -606,8 +624,13 @@ Public Class FilledSolidPanelVM
             EgtSelectObj(m_SelFilledSolid.nCurveId)
          Case FilledSolidSelectionTypes.EXTRUSION
             ' creo layer per estrusione
-            Dim nNewExtrusionLayerId As Integer = EgtCreateGroup(m_nPartId)
-            EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
+            Dim nNewExtrusionLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWEXTRUSION)
+            If nNewExtrusionLayerId = GDB_ID.NULL Then
+               nNewExtrusionLayerId = EgtCreateGroup(m_nPartId)
+               EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
+            Else
+               EgtEmptyGroup(nNewExtrusionLayerId)
+            End If
             EgtSetCurrPartLayer(m_nPartId, nNewExtrusionLayerId)
             EgtSelectObj(m_SelFilledSolid.nCurveId)
          Case FilledSolidSelectionTypes.BOTH
@@ -615,6 +638,8 @@ Public Class FilledSolidPanelVM
             EgtSelectObj(m_SelFilledSolid.nExtrusionId)
       End Select
       EgtDraw()
+      ' disattivo il resto dell'interfaccia
+      ManageInterface(False)
       Return True
    End Function
 
@@ -624,6 +649,7 @@ Public Class FilledSolidPanelVM
    End Sub
 
    Friend Sub OnExecCmdEnd(command As Controller.CMD)
+      m_bEscOnLine2P = False
       Select Case command
          Case Controller.CMD.MODIFYCURVE, Controller.CMD.ADDPOINTCURVE, Controller.CMD.REMOVEPOINTCURVE
             ' leggo altezza estrusione
@@ -663,6 +689,10 @@ Public Class FilledSolidPanelVM
             ' Imposto flag di ricalcolo slice
             EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
       End Select
+      ' se non ho creato percorso riabilito interfaccia
+      If Not m_bIsCreatingPath Then
+         ManageInterface(True)
+      End If
       If command <> Controller.CMD.LINE2P AndAlso command <> Controller.CMD.EXTRUDE Then Return
       ' se finita creazione estrusione
       If m_bIsCreatingExtrusion Then
@@ -705,6 +735,7 @@ Public Class FilledSolidPanelVM
          If NewGeomType = GDB_TY.CRV_COMPO Then
             If Not EgtCurveIsClosed(nNewEntityId) Then
                EgtCloseCurveCompo(nNewEntityId)
+               m_bEscOnLine2P = True
             End If
             EgtSetName(nNewEntityId, RIB_CURVE)
             ' resetto colore entita'
@@ -757,6 +788,13 @@ Public Class FilledSolidPanelVM
             ' rimetto la selezione scena a null
             Map.refSceneHostVM.MainScene.SetStatusNull()
          End If
+         ' se esc su creazione percorso, lo annullo, altrimenti riabilito interfaccia
+         If m_bEscOnLine2P Then
+            m_bEscOnLine2P = False
+         Else
+            If m_bIsCreatingExtrusion Then m_bIsCreatingExtrusion = False
+            ManageInterface(True)
+         End If
       End If
    End Sub
 
@@ -792,6 +830,18 @@ Public Class FilledSolidPanelVM
       Return nFilledSolidIndex + 1
    End Function
 
+   Friend Sub ManageInterface(bValue As Boolean)
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(bValue)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(bValue)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(bValue)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(bValue)
+      Map.refInstrumentPanelVM.SetInstrumentPanelIsEnabled(bValue)
+      SetFilledSolidListIsEnabled(bValue)
+   End Sub
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -815,7 +865,9 @@ Public Class FilledSolidPanelVM
    ''' </summary>
    Public Sub Import(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.InsertFilledSolid()
+      ManageInterface(True)
    End Sub
 
 #End Region ' Import
@@ -839,6 +891,7 @@ Public Class FilledSolidPanelVM
    ''' </summary>
    Public Sub Line2P(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Dim nNewShellNumberLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWRIB)
       If nNewShellNumberLayerId = GDB_ID.NULL Then nNewShellNumberLayerId = EgtCreateGroup(m_nPartId)
       EgtSetName(nNewShellNumberLayerId, LAY_NEWRIB)
@@ -887,6 +940,7 @@ Public Class FilledSolidPanelVM
          End If
          NotifyPropertyChanged(NameOf(SelFilledSolid))
       End If
+      SetFilledSolidListIsEnabled(True)
    End Sub
 
 #End Region    ' Delete
@@ -1171,6 +1225,7 @@ Public Class FilledSolidPanelVM
    ''' </summary>
    Public Sub CPlaneElevation(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ELEVATION)
    End Sub
 
@@ -1195,6 +1250,7 @@ Public Class FilledSolidPanelVM
    ''' </summary>
    Public Sub CPlaneOrigin(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ORIGIN)
    End Sub
 
@@ -1311,6 +1367,7 @@ Public Class FilledSolidPanelVM
    ''' </summary>
    Public Sub CPlaneObj(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       ' salvo selezione precedente e deseleziono altri oggetti
       m_PrevSelObjs.Clear()
       Dim nSelObjId As Integer = EgtGetFirstSelectedObj()

Icarus/FilledSolidParamPanel/FilledSolidParamPanelV.xaml

@@ -84,6 +84,32 @@
                                 Style="{StaticResource ToolBar_SmallButton}"/>
                      </Grid>
                   </DataTemplate>
+                  <DataTemplate DataType="{x:Type PrintApp:CheckMachiningParam}">
+                     <Grid Margin="0,1,2.5,1"
+                           IsEnabled="{Binding bIsActive}">
+                        <Grid.ColumnDefinitions>
+                           <ColumnDefinition Width="2*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="Auto"/>
+                        </Grid.ColumnDefinitions>
+                        <TextBlock Text="{Binding sName}"
+                                   Margin="0,0,2.5,0"
+                                   Style="{StaticResource ParameterList_TextBlock}"/>
+                        <CheckBox Grid.Column="1"
+                                  IsChecked="{Binding bValue}"
+                                  HorizontalAlignment="Center"
+                                  VerticalAlignment="Center"
+                                  Margin="2.5,0,0,0"/>
+                        <Button Grid.Column="2"
+                                Content="R"
+                                Command="{Binding ResetParam_Command}"
+                                IsEnabled="{Binding bIsModifiedFromPart}"
+                                VerticalContentAlignment="Center"
+                                HorizontalContentAlignment="Center"
+                                Margin="2.5,0,0,0"
+                                Style="{StaticResource ToolBar_SmallButton}"/>
+                     </Grid>
+                  </DataTemplate>
                </ItemsControl.Resources>
             </ItemsControl>
          </ScrollViewer>

Icarus/FilledSolidParamPanel/FilledSolidParamPanelVM.vb

@@ -42,12 +42,20 @@ Public Class FilledSolidParamPanelVM
 
       m_Type = Cathegories.AUX_SOLID
       m_sName = "Filled Solid"
-      m_MachiningParamList = New List(Of MachiningParam)({New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nFilledSolidId, nPartId, Me),
-                                                          New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nFilledSolidId, nPartId, Me),
+      m_MachiningParamList = New List(Of MachiningParam)({New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidcheckMachiningParam(MachiningParam.Params.AUXSOLIDSINFILLLINK, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDCOUNT, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETLEADPOINT, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSDENSITY, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSGRIDOVERLAP, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSDIRECTION, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETX, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETY, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSCOASTINGLEN, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPELEN, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPEDIR, nFilledSolidId, nPartId, Me)})
@@ -190,6 +198,10 @@ Public Class FilledSolidNumericMachiningParam
       MyBase.New(Type, Cathegory)
       Dim bReadFromPart As Boolean = False
       Select Case Type
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDCOUNT, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSSTRANDCOUNT, m_dPartValue)
+            m_bIsLen = True
          Case Params.AUXSOLIDSOVERLAP
             bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSOVERLAP, m_dValue)
             EgtGetInfo(nPartId, MAC_AUXSOLIDSOVERLAP, m_dPartValue)
@@ -202,6 +214,30 @@ Public Class FilledSolidNumericMachiningParam
             bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, m_dValue)
             EgtGetInfo(nPartId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, m_dPartValue)
             m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETLEADPOINT, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETLEADPOINT, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSDENSITY
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSDENSITY, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSDENSITY, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSGRIDOVERLAP, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSGRIDOVERLAP, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSDIRECTION
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSDIRECTION, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSDIRECTION, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETX
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETX, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETX, m_dPartValue)
+            m_bIsLen = True
+         Case Params.AUXSOLIDSOFFSETY
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETY, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSOFFSETY, m_dPartValue)
+            m_bIsLen = True
          Case Params.AUXSOLIDSCOASTINGLEN
             bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSCOASTINGLEN, m_dValue)
             EgtGetInfo(nPartId, MAC_AUXSOLIDSCOASTINGLEN, m_dPartValue)
@@ -230,6 +266,12 @@ Public Class FilledSolidNumericMachiningParam
          sWriteValue = DoubleToString(m_dValue, 2)
       End If
       Select Case Type
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDCOUNT, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDCOUNT)
+            End If
          Case Params.AUXSOLIDSOVERLAP
             If bIsModifiedFromPart Then
                EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSOVERLAP, sWriteValue)
@@ -248,6 +290,42 @@ Public Class FilledSolidNumericMachiningParam
             Else
                EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE)
             End If
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETLEADPOINT, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETLEADPOINT)
+            End If
+         Case Params.AUXSOLIDSDENSITY
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSDENSITY, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSDENSITY)
+            End If
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSGRIDOVERLAP, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSGRIDOVERLAP)
+            End If
+         Case Params.AUXSOLIDSDIRECTION
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSDIRECTION, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSDIRECTION)
+            End If
+         Case Params.AUXSOLIDSOFFSETX
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETX, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETX)
+            End If
+         Case Params.AUXSOLIDSOFFSETY
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETY, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSOFFSETY)
+            End If
          Case Params.AUXSOLIDSCOASTINGLEN
             If bIsModifiedFromPart Then
                EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSCOASTINGLEN, sWriteValue)
@@ -339,9 +417,14 @@ Public Class FilledSolidComboMachiningParam
       Dim bReadFromPart As Boolean = False
       Select Case Type
          Case Params.AUXSOLIDSINFILL
-            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL.NONE, "None"),
-                                                     New IdNameStruct(Machining.MPAR_INFILL.OFFSET, "Offset"),
-                                                     New IdNameStruct(Machining.MPAR_INFILL.ZIGZAG, "ZigZag")})
+            m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                     New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
             Dim nSelValue As Integer = 1
             bReadFromRib = EgtGetInfo(nRibId, MAC_AUXSOLIDSINFILL, nSelValue)
             If bReadFromRib Then
@@ -379,7 +462,7 @@ Public Class FilledSolidComboMachiningParam
          Else
             Select Case Type
                Case Params.AUXSOLIDSINFILL
-                  m_OrigSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = Machining.MPAR_INFILL.NONE)
+                  m_OrigSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = Machining.MPAR_INFILL_TYPE.NONE)
                   m_SelValue = m_OrigSelValue
                Case Params.AUXSOLIDSSTRANDORDER
                   m_OrigSelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = Machining.MPAR_STRANDORDERS.OUTTOIN)
@@ -447,4 +530,95 @@ Public Class FilledSolidComboMachiningParam
 #End Region    ' COMMANDS
 
 
+End Class
+
+Public Class FilledSolidCheckMachiningParam
+   Inherits CheckMachiningParam
+
+   Public Overrides Property bValue As Boolean
+      Get
+         Return m_bValue
+      End Get
+      Set(value As Boolean)
+         m_bValue = value
+         NotifyPropertyChanged(NameOf(bValue))
+         NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+      End Set
+   End Property
+
+   Protected m_bPartValue As Boolean
+   Public ReadOnly Property bPartValue As Boolean
+      Get
+         Return m_bPartValue
+      End Get
+   End Property
+
+   Public ReadOnly Property bIsModifiedFromPart As Boolean
+      Get
+         Return m_bValue <> m_bPartValue
+      End Get
+   End Property
+
+   ' Definizione comandi
+   Private m_cmdResetParam As ICommand
+
+   Sub New(Type As Params, nAuxSolidId As Integer, nPartId As Integer, Cathegory As MachiningCathegory)
+      MyBase.New(Type, Cathegory)
+      Dim bReadFromPart As Boolean = False
+      Select Case Type
+         Case Params.AUXSOLIDSINFILLLINK
+            bReadFromPart = EgtGetInfo(nAuxSolidId, MAC_AUXSOLIDSINFILLLINK, m_bValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSINFILLLINK, m_bPartValue)
+      End Select
+      m_bOrigValue = m_bValue
+      If Not bReadFromPart Then
+         m_bValue = m_bPartValue
+         m_bOrigValue = m_bPartValue
+      End If
+   End Sub
+
+   Friend Sub WriteParamInRib(nAuxSolidId As Integer)
+      Select Case Type
+         Case Params.AUXSOLIDSINFILLLINK
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nAuxSolidId, MAC_AUXSOLIDSINFILLLINK, If(m_bValue, 1, 0))
+            Else
+               EgtRemoveInfo(nAuxSolidId, MAC_AUXSOLIDSINFILLLINK)
+            End If
+      End Select
+   End Sub
+
+   Friend Overrides Sub SaveParam()
+      m_bOrigValue = m_bValue
+   End Sub
+
+   Friend Overrides Sub ResetParam()
+      m_bValue = m_bOrigValue
+      NotifyPropertyChanged(NameOf(bValue))
+   End Sub
+
+#Region "COMMANDS"
+
+#Region "ResetParam"
+
+   Public ReadOnly Property ResetParam_Command As ICommand
+      Get
+         If m_cmdResetParam Is Nothing Then
+            m_cmdResetParam = New Command(AddressOf ResetParamCmd)
+         End If
+         Return m_cmdResetParam
+      End Get
+   End Property
+
+   Public Sub ResetParamCmd()
+      m_bValue = m_bPartValue
+      NotifyPropertyChanged(NameOf(bValue))
+      NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+   End Sub
+
+#End Region    ' ResetParam
+
+#End Region    ' COMMANDS
+
+
 End Class

Icarus/InstrumentPanel/InstrumentPanelV.xaml

@@ -3,6 +3,7 @@
             xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
             xmlns:sys="clr-namespace:System;assembly=mscorlib"
             xmlns:local="clr-namespace:Icarus"
+            IsEnabled="{Binding InstrumentPanel_IsEnabled}"
             Orientation="Horizontal">
 
    <local:CheckedImageToggleButton ToolTip="{Binding GetDist_ToolTip}"

Icarus/MachiningDb/Machining.vb

@@ -45,12 +45,6 @@ Public Class Machining
       SUPPORT = 4
    End Enum
 
-   Public Enum MPAR_INFILL As Integer
-      NONE = 1
-      OFFSET = 2
-      ZIGZAG = 3
-   End Enum
-
    Public Enum MPAR_DYNAMIC_MODE As Integer
       STANDARD = 1
       FAST = 2
@@ -67,6 +61,17 @@ Public Class Machining
       RIB_SUPPORT = 8
    End Enum
 
+   Public Enum MPAR_INFILL_TYPE As Integer
+      NONE = 0
+      OFFSET = 16
+      ZIGZAG = 17
+      LINES = 32
+      GRID = 33
+      ZIGZAG_GRID = 34
+      HONEYCOMB = 35
+      HONEYCOMB_GRID = 36
+   End Enum
+
    Protected m_CathegoryList As New ObservableCollection(Of MachiningCathegory)
    Public ReadOnly Property CathegoryList As ObservableCollection(Of MachiningCathegory)
       Get
@@ -147,6 +152,7 @@ Public Class Machining
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.RIBS, nIndex))
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.SHELL_NUMBER, nIndex))
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.AUX_SOLID, nIndex))
+      m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.INFILL, nIndex))
       m_CathegoryList.Add(New MachiningCathegory(MachiningCathegory.Cathegories.MATERIALS, nIndex))
       For Each Cathegory In m_CathegoryList
          For Each MachiningParam In Cathegory.MachiningParamList
@@ -273,7 +279,8 @@ Public Class MachiningCathegory
       RIBS = 8
       SHELL_NUMBER = 9
       AUX_SOLID = 10
-      MATERIALS = 11
+      INFILL = 11
+      MATERIALS = 12
    End Enum
 
    Protected m_Type As Cathegories
@@ -326,7 +333,6 @@ Public Class MachiningCathegory
                                                                 New NumericMachiningParam(MachiningParam.Params.STARTPOINTOFFSETONSLICE, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.STRANDORDER, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.DIRECTION, nIndex, Me),
-                                                                New NumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.G0FEED, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.G0FEEDZ, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.LINKZUP, nIndex, Me),
@@ -336,7 +342,8 @@ Public Class MachiningCathegory
                                                                 New OrderedMachiningParam(MachiningParam.Params.PRINT_ORDER, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.PREFLOWDELAY, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.POSTFLOWDELAY, nIndex, Me),
-                                                                New NumericMachiningParam(MachiningParam.Params.SCREWBACK, nIndex, Me)})
+                                                                New NumericMachiningParam(MachiningParam.Params.SCREWBACK, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.SLICINGHEIGHT, nIndex, Me)})
          Case Cathegories.LINK
             m_sName = "Shell"
             m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.OFFSETLEADPOINT, nIndex, Me),
@@ -378,15 +385,40 @@ Public Class MachiningCathegory
                                                                 New NumericMachiningParam(MachiningParam.Params.SHELLNBRWIPEDIR, nIndex, Me)})
          Case Cathegories.AUX_SOLID
             m_sName = "Filled Solid"
-            m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nIndex, Me),
-                                                                New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nIndex, Me),
+            m_MachiningParamList = New List(Of MachiningParam)({New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nIndex, Me),
+                                                                New CheckMachiningParam(MachiningParam.Params.AUXSOLIDSINFILLLINK, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDCOUNT, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETLEADPOINT, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSDENSITY, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSGRIDOVERLAP, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSDIRECTION, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETX, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOFFSETY, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSOVERLAP, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSCOASTINGLEN, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPELEN, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSWIPEDIR, nIndex, Me)})
+         Case Cathegories.INFILL
+            m_sName = "Infill"
+            m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.FLOORCOUNT, nIndex, Me),
+                                                                New ComboMachiningParam(MachiningParam.Params.FLOORTYPE, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.CEILCOUNT, nIndex, Me),
+                                                                New ComboMachiningParam(MachiningParam.Params.CEILTYPE, nIndex, Me),
+                                                                New ComboMachiningParam(MachiningParam.Params.INFILLTYPE, nIndex, Me),
+                                                                New CheckMachiningParam(MachiningParam.Params.INFILLLINK, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLDENSITY, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLGRIDOVERLAP, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLDIRECTION, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLOFFSETX, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLOFFSETY, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLOVERLAP, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLCOASTING, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLWIPE, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.INFILLWIPEDIR, nIndex, Me)})
          Case Cathegories.MATERIALS
             m_sName = "Materials"
             Dim sMaterials As String = ""
@@ -414,6 +446,19 @@ Public Class MachiningCathegory
                Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
                MachiningParam.ManageDependencyParam()
             Next
+            For Each Param In {MachiningParam.Params.AUXSOLIDSSTRANDCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
+         Case Cathegories.INFILL
+            For Each Param In {MachiningParam.Params.FLOORCOUNT, MachiningParam.Params.CEILCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
+            For Each Param In {MachiningParam.Params.INFILLTYPE}
+               Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
       End Select
    End Sub
 
@@ -454,7 +499,6 @@ Public MustInherit Class MachiningParam
       STARTPOINTOFFSETONSLICE = 8
       STRANDORDER = 9
       DIRECTION = 10
-      FLOORCOUNT = 11
       G0FEED = 12
       LINKZUP = 13
       G0FEEDZ = 14
@@ -465,6 +509,7 @@ Public MustInherit Class MachiningParam
       PREFLOWDELAY = 19
       POSTFLOWDELAY = 20
       SCREWBACK = 21
+      SLICINGHEIGHT = 22
       LINKTYPE = 51
       LINKPARAM = 52
       LEADIN = 53
@@ -504,10 +549,33 @@ Public MustInherit Class MachiningParam
       AUXSOLIDSLINKTYPE = 204
       AUXSOLIDSLINKPARAM = 205
       AUXSOLIDSSTARTPOINTOFFSETONSLICE = 206
-      AUXSOLIDSCOASTINGLEN = 207
-      AUXSOLIDSWIPELEN = 208
-      AUXSOLIDSWIPEDIR = 209
-      MATERIALS = 250
+      AUXSOLIDSOFFSETLEADPOINT = 207
+      AUXSOLIDSDENSITY = 208
+      AUXSOLIDSGRIDOVERLAP = 209
+      AUXSOLIDSDIRECTION = 210
+      AUXSOLIDSOFFSETX = 211
+      AUXSOLIDSOFFSETY = 212
+      AUXSOLIDSCOASTINGLEN = 213
+      AUXSOLIDSWIPELEN = 214
+      AUXSOLIDSWIPEDIR = 215
+      AUXSOLIDSSTRANDCOUNT = 216
+      AUXSOLIDSINFILLLINK = 217
+      FLOORCOUNT = 250
+      FLOORTYPE = 251
+      CEILCOUNT = 252
+      CEILTYPE = 253
+      INFILLTYPE = 254
+      INFILLLINK = 255
+      INFILLDENSITY = 256
+      INFILLOVERLAP = 257
+      INFILLGRIDOVERLAP = 258
+      INFILLDIRECTION = 259
+      INFILLOFFSETX = 260
+      INFILLOFFSETY = 261
+      INFILLCOASTING = 262
+      INFILLWIPE = 263
+      INFILLWIPEDIR = 264
+      MATERIALS = 500
    End Enum
 
    Protected m_Type As Params
@@ -533,12 +601,29 @@ Public MustInherit Class MachiningParam
       End Get
    End Property
 
+   Public ReadOnly Property bIsBeta As Boolean
+      Get
+         Select Case m_Type
+            Case Params.FLOORCOUNT, Params.FLOORTYPE, Params.CEILCOUNT, Params.CEILTYPE, Params.INFILLTYPE
+               Return True
+            Case Else
+               Return False
+         End Select
+      End Get
+   End Property
+
+   Public ReadOnly Property IsBeta_Visibility As Visibility
+      Get
+         Return If(bIsBeta, Visibility.Visible, Visibility.Collapsed)
+      End Get
+   End Property
+
    Sub New(Type As Params, Cathegory As MachiningCathegory)
       m_Type = Type
       m_Cathegory = Cathegory
       Select Case m_Type
          Case Params.SLICINGTYPE
-            m_sName = "Slicing direction"
+            m_sName = "Slicing Direction"
          Case Params.STRANDH
             m_sName = "Strand Height"
          Case Params.STRANDW
@@ -595,6 +680,8 @@ Public MustInherit Class MachiningParam
             m_sName = "Post Flow Delay"
          Case Params.SCREWBACK
             m_sName = "Screw Back"
+         Case Params.SLICINGHEIGHT
+            m_sName = "Slicing Height"
          Case Params.RIBSTYPE
             m_sName = "Type"
          Case Params.RIBSOVERLAP
@@ -637,6 +724,10 @@ Public MustInherit Class MachiningParam
             m_sName = "Overlap [%]"
          Case Params.AUXSOLIDSINFILL
             m_sName = "Infill"
+         Case Params.AUXSOLIDSINFILLLINK
+            m_sName = "Infill Link"
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            m_sName = "Strand Count"
          Case Params.AUXSOLIDSSTRANDORDER
             m_sName = "Strand Order"
          Case Params.AUXSOLIDSLINKTYPE
@@ -645,6 +736,18 @@ Public MustInherit Class MachiningParam
             m_sName = "Link Parameter"
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             m_sName = "Start Point Offset On Slice"
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            m_sName = "Offset Lead Point"
+         Case Params.AUXSOLIDSDENSITY
+            m_sName = "Density [%]"
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            m_sName = "Grid Overlap [%]"
+         Case Params.AUXSOLIDSDIRECTION
+            m_sName = "Direction"
+         Case Params.AUXSOLIDSOFFSETX
+            m_sName = "Offset X"
+         Case Params.AUXSOLIDSOFFSETY
+            m_sName = "Offset Y"
          Case Params.AUXSOLIDSCOASTINGLEN
             m_sName = "Coasting Length"
          Case Params.AUXSOLIDSWIPELEN
@@ -658,11 +761,39 @@ Public MustInherit Class MachiningParam
          Case Params.STRANDOVERLAP
             m_sName = "Strand Overlap [%]"
          Case Params.FLOWRATE_PC
-            m_sName = "Flow rate [%]"
+            m_sName = "Flow Rate [%]"
          Case Params.DYNAMIC_MODE
             m_sName = "Dynamic Mode"
          Case Params.PRINT_ORDER
             m_sName = "Print Order"
+         Case Params.FLOORTYPE
+            m_sName = "Floor Type"
+         Case Params.CEILCOUNT
+            m_sName = "Ceil Count"
+         Case Params.CEILTYPE
+            m_sName = "Ceil Type"
+         Case Params.INFILLTYPE
+            m_sName = "Infill Type"
+         Case Params.INFILLLINK
+            m_sName = "Link"
+         Case Params.INFILLDENSITY
+            m_sName = "Density [%]"
+         Case Params.INFILLOVERLAP
+            m_sName = "Overlap [%]"
+         Case Params.INFILLGRIDOVERLAP
+            m_sName = "Grid Overlap [%]"
+         Case Params.INFILLDIRECTION
+            m_sName = "Direction"
+         Case Params.INFILLOFFSETX
+            m_sName = "Offset X"
+         Case Params.INFILLOFFSETY
+            m_sName = "Offset Y"
+         Case Params.INFILLCOASTING
+            m_sName = "Coasting"
+         Case Params.INFILLWIPE
+            m_sName = "Wipe"
+         Case Params.INFILLWIPEDIR
+            m_sName = "Wipe Direction"
       End Select
    End Sub
 
@@ -714,6 +845,7 @@ Public Class NumericMachiningParam
             m_dValue = dTempValue
          End If
          NotifyPropertyChanged(NameOf(sValue))
+         ManageDependencyParam()
       End Set
    End Property
 
@@ -759,6 +891,11 @@ Public Class NumericMachiningParam
             m_bIsActiveMinMax = True
          End If
       End If
+      If Type = Params.SLICINGHEIGHT Then
+         m_dMinValue = 0
+         m_dMaxValue = CurrentMachine.dSlicingMaxHeight
+         m_bIsActiveMinMax = True
+      End If
       ' leggo parametri da Db
       If nIndex = 0 Then
          m_dValue = 0
@@ -838,7 +975,10 @@ Public Class NumericMachiningParam
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_POSTFLOWDELAY, 0)
                m_bIsLen = False
             Case Params.SCREWBACK
-               m_dValue = ReadMachiningParamDouble(nIndex, MAC_SCREWBACK, 0)
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_SCREWBACK, 45)
+               m_bIsLen = False
+            Case Params.SLICINGHEIGHT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_SLICINGHEIGHT, CurrentMachine.dSlicingMaxHeight)
                m_bIsLen = False
             Case Params.RIBSOVERLAP
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_RIBSOVERLAP, 0)
@@ -873,6 +1013,9 @@ Public Class NumericMachiningParam
             Case Params.SHELLNBRWIPEDIR
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_SHELLNBRWIPEDIR, 0)
                m_bIsLen = False
+            Case Params.AUXSOLIDSSTRANDCOUNT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTRANDCOUNT, 0)
+               m_bIsLen = False
             Case Params.AUXSOLIDSOVERLAP
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSOVERLAP, 0)
                m_bIsLen = False
@@ -882,6 +1025,24 @@ Public Class NumericMachiningParam
             Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, 0)
                m_bIsLen = True
+            Case Params.AUXSOLIDSOFFSETLEADPOINT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSOFFSETLEADPOINT, 0)
+               m_bIsLen = True
+            Case Params.AUXSOLIDSDENSITY
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSDENSITY, 0)
+               m_bIsLen = False
+            Case Params.AUXSOLIDSGRIDOVERLAP
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSGRIDOVERLAP, 0)
+               m_bIsLen = True
+            Case Params.AUXSOLIDSDIRECTION
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSDIRECTION, 0)
+               m_bIsLen = False
+            Case Params.AUXSOLIDSOFFSETX
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSOFFSETX, 0)
+               m_bIsLen = True
+            Case Params.AUXSOLIDSOFFSETY
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSOFFSETY, 0)
+               m_bIsLen = True
             Case Params.AUXSOLIDSCOASTINGLEN
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSCOASTINGLEN, 0)
                m_bIsLen = True
@@ -894,11 +1055,65 @@ Public Class NumericMachiningParam
             Case Params.FLOWRATE_PC
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_CONSTANT, 100)
                m_bIsLen = False
+            Case Params.CEILCOUNT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_CEILCOUNT, 0)
+               m_bIsLen = False
+            Case Params.INFILLDENSITY
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLDENSITY, 0)
+               m_bIsLen = False
+            Case Params.INFILLOVERLAP
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLOVERLAP, 0)
+               m_bIsLen = False
+            Case Params.INFILLGRIDOVERLAP
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLGRIDOVERLAP, 0)
+               m_bIsLen = False
+            Case Params.INFILLDIRECTION
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLDIRECTION, 0)
+               m_bIsLen = False
+            Case Params.INFILLOFFSETX
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLOFFSETX, 0)
+               m_bIsLen = True
+            Case Params.INFILLOFFSETY
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLOFFSETY, 0)
+               m_bIsLen = True
+            Case Params.INFILLCOASTING
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLCOASTING, 0)
+               m_bIsLen = True
+            Case Params.INFILLWIPE
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLWIPE, 0)
+               m_bIsLen = True
+            Case Params.INFILLWIPEDIR
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_INFILLWIPEDIR, 0)
+               m_bIsLen = False
          End Select
       End If
       m_dOrigValue = m_dValue
    End Sub
 
+   Friend Sub ManageDependencyParam()
+      ' gestisco dis/attivazione parametri dipendenti
+      Select Case m_Type
+         Case Params.FLOORCOUNT
+            Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.FLOORTYPE)
+            ComboMachiningParam.SetIsActive(m_dValue <> 0)
+         Case Params.CEILCOUNT
+            Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.CEILTYPE)
+            ComboMachiningParam.SetIsActive(m_dValue <> 0)
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            Dim AuxSolidsInfillParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSINFILL)
+            Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTRANDORDER)
+            ComboMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKTYPE)
+            ComboMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            Dim NumericMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKPARAM)
+            NumericMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE)
+            NumericMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETLEADPOINT)
+            NumericMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+      End Select
+   End Sub
+
    Friend Overrides Sub WriteParamOnDb(nIndex As Integer, Optional sFilePath As String = "")
       Dim sWriteValue As String = ""
       If m_bIsLen Then
@@ -957,6 +1172,8 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_POSTFLOWDELAY, sWriteValue, sFilePath)
          Case Params.SCREWBACK
             WriteMachiningParam(nIndex, MAC_SCREWBACK, sWriteValue, sFilePath)
+         Case Params.SLICINGHEIGHT
+            WriteMachiningParam(nIndex, MAC_SLICINGHEIGHT, sWriteValue, sFilePath)
          Case Params.RIBSOVERLAP
             WriteMachiningParam(nIndex, MAC_RIBSOVERLAP, sWriteValue, sFilePath)
          Case Params.RIBSSTRANDCOUNT
@@ -979,12 +1196,26 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_SHELLNBRWIPE, sWriteValue, sFilePath)
          Case Params.SHELLNBRWIPEDIR
             WriteMachiningParam(nIndex, MAC_SHELLNBRWIPEDIR, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSSTRANDCOUNT, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSOVERLAP
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSOVERLAP, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSLINKPARAM
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSLINKPARAM, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSOFFSETLEADPOINT
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSOFFSETLEADPOINT, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSDENSITY
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSDENSITY, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSGRIDOVERLAP
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSGRIDOVERLAP, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSDIRECTION
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSDIRECTION, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSOFFSETX
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSOFFSETX, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSOFFSETY
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSOFFSETY, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSCOASTINGLEN
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSCOASTINGLEN, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSWIPELEN
@@ -993,6 +1224,26 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSWIPEDIR, sWriteValue, sFilePath)
          Case Params.FLOWRATE_PC
             WriteMachiningParam(nIndex, MAC_CONSTANT, sWriteValue, sFilePath)
+         Case Params.CEILCOUNT
+            WriteMachiningParam(nIndex, MAC_CEILCOUNT, sWriteValue, sFilePath)
+         Case Params.INFILLDENSITY
+            WriteMachiningParam(nIndex, MAC_INFILLDENSITY, sWriteValue, sFilePath)
+         Case Params.INFILLOVERLAP
+            WriteMachiningParam(nIndex, MAC_INFILLOVERLAP, sWriteValue, sFilePath)
+         Case Params.INFILLGRIDOVERLAP
+            WriteMachiningParam(nIndex, MAC_INFILLGRIDOVERLAP, sWriteValue, sFilePath)
+         Case Params.INFILLDIRECTION
+            WriteMachiningParam(nIndex, MAC_INFILLDIRECTION, sWriteValue, sFilePath)
+         Case Params.INFILLOFFSETX
+            WriteMachiningParam(nIndex, MAC_INFILLOFFSETX, sWriteValue, sFilePath)
+         Case Params.INFILLOFFSETY
+            WriteMachiningParam(nIndex, MAC_INFILLOFFSETY, sWriteValue, sFilePath)
+         Case Params.INFILLCOASTING
+            WriteMachiningParam(nIndex, MAC_INFILLCOASTING, sWriteValue, sFilePath)
+         Case Params.INFILLWIPE
+            WriteMachiningParam(nIndex, MAC_INFILLWIPE, sWriteValue, sFilePath)
+         Case Params.INFILLWIPEDIR
+            WriteMachiningParam(nIndex, MAC_INFILLWIPEDIR, sWriteValue, sFilePath)
       End Select
    End Sub
 
@@ -1137,50 +1388,71 @@ Public Class ComboMachiningParam
             Case Params.STRANDORDER
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_STRANDORDERS.OUTTOIN, "From Outside To Inside"),
                                                         New IdNameStruct(Machining.MPAR_STRANDORDERS.INTOOUT, "From Inside To Outside")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_STRANDORDER, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_STRANDORDER, Machining.MPAR_STRANDORDERS.OUTTOIN))
             Case Params.DIRECTION
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_DIRECTIONS.CCW, "Counterclockwise"),
                                                         New IdNameStruct(Machining.MPAR_DIRECTIONS.CW, "Clockwise")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_DIRECTION, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_DIRECTION, Machining.MPAR_DIRECTIONS.CCW))
             Case Params.LINKTYPE
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_LINKTYPES.NONE, "None"),
                                                         New IdNameStruct(Machining.MPAR_LINKTYPES.LINEAR, "Linear"),
                                                         New IdNameStruct(Machining.MPAR_LINKTYPES.BIARC, "Biarc")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LINKTYPE, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LINKTYPE, Machining.MPAR_LEADINOUT.NONE))
             Case Params.LEADIN
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_LEADINOUT.NONE, "None"),
                                                         New IdNameStruct(Machining.MPAR_LEADINOUT.LINEAR, "Linear"),
                                                         New IdNameStruct(Machining.MPAR_LEADINOUT.ARC, "Arc")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADIN, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADIN, Machining.MPAR_LEADINOUT.NONE))
             Case Params.LEADOUT
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_LEADINOUT.NONE, "None"),
                                                         New IdNameStruct(Machining.MPAR_LEADINOUT.LINEAR, "Linear"),
                                                         New IdNameStruct(Machining.MPAR_LEADINOUT.ARC, "Arc")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADOUT, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_LEADOUT, Machining.MPAR_LEADINOUT.NONE))
             Case Params.RIBSTYPE
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_RIBSTYPE.INTERNAL, "Internal"),
                                                         New IdNameStruct(Machining.MPAR_RIBSTYPE.EXTERNAL, "External"),
                                                         New IdNameStruct(Machining.MPAR_RIBSTYPE.UNBOUNDED, "Unbounded"),
                                                         New IdNameStruct(Machining.MPAR_RIBSTYPE.SUPPORT, "Support")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_RIBSTYPE, 1))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_RIBSTYPE, Machining.MPAR_RIBSTYPE.INTERNAL))
             Case Params.AUXSOLIDSINFILL
-               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL.NONE, "None"),
-                                                        New IdNameStruct(Machining.MPAR_INFILL.OFFSET, "Offset"),
-                                                        New IdNameStruct(Machining.MPAR_INFILL.ZIGZAG, "ZigZag")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSINFILL, 0))
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSINFILL, Machining.MPAR_INFILL_TYPE.NONE))
             Case Params.AUXSOLIDSSTRANDORDER
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_STRANDORDERS.OUTTOIN, "From Outside To Inside"),
                                                         New IdNameStruct(Machining.MPAR_STRANDORDERS.INTOOUT, "From Inside To Outside")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTRANDORDER, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTRANDORDER, Machining.MPAR_STRANDORDERS.OUTTOIN))
             Case Params.AUXSOLIDSLINKTYPE
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_LINKTYPES.NONE, "None"),
                                                         New IdNameStruct(Machining.MPAR_LINKTYPES.LINEAR, "Linear"),
                                                         New IdNameStruct(Machining.MPAR_LINKTYPES.BIARC, "Biarc")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSLINKTYPE, 0))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSLINKTYPE, Machining.MPAR_LINKTYPES.NONE))
             Case Params.DYNAMIC_MODE
                m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_DYNAMIC_MODE.STANDARD, "Standard"),
                                                         New IdNameStruct(Machining.MPAR_DYNAMIC_MODE.FAST, "Fast")})
-               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_DYNAMICMODE, 1))
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_DYNAMICMODE, Machining.MPAR_DYNAMIC_MODE.STANDARD))
+            Case Params.FLOORTYPE
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_FLOORTYPE, Machining.MPAR_INFILL_TYPE.OFFSET))
+            Case Params.CEILTYPE
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.OFFSET, "Offset"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG, "ZigZag")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_CEILTYPE, Machining.MPAR_INFILL_TYPE.OFFSET))
+            Case Params.INFILLTYPE
+               m_ValueList = New List(Of IdNameStruct)({New IdNameStruct(Machining.MPAR_INFILL_TYPE.NONE, "None"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.LINES, "Lines"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.GRID, "Grid"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID, "Zigzag Grid"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB, "Honeycomb"),
+                                                        New IdNameStruct(Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID, "Honeycomb Grid")})
+               m_SelValue = m_ValueList.FirstOrDefault(Function(x) x.Id = ReadMachiningParamDouble(nIndex, MAC_INFILLTYPE, Machining.MPAR_INFILL_TYPE.NONE))
          End Select
       End If
       m_OrigSelValue = m_SelValue
@@ -1206,12 +1478,43 @@ Public Class ComboMachiningParam
             Dim CheckMachiningParam As CheckMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.RIBSLIMITUNBOUNDEDWITHSOLID)
             CheckMachiningParam.SetIsActive(m_SelValue.Id = MPAR_RIBSTYPE.UNBOUNDED)
          Case Params.AUXSOLIDSINFILL
+            Dim AuxSolidsStrandCountParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTRANDCOUNT)
             Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTRANDORDER)
-            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL.OFFSET)
+            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
             ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKTYPE)
-            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL.OFFSET)
+            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
             Dim NumMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKPARAM)
-            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL.OFFSET)
+            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE)
+            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETLEADPOINT)
+            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSDENSITY)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSGRIDOVERLAP)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso
+                                           m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSDIRECTION)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETX)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETY)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+            Dim CheckMachiningParam As CheckMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSINFILLLINK)
+            CheckMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+         Case Params.INFILLTYPE
+            Dim NumMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLDENSITY)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLGRIDOVERLAP)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLDIRECTION)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLOFFSETX)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
+            NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLOFFSETY)
+            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
+            Dim CheckMachiningParam As CheckMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLLINK)
+            CheckMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
       End Select
    End Sub
 
@@ -1239,6 +1542,12 @@ Public Class ComboMachiningParam
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSLINKTYPE, m_SelValue.Id, sFilePath)
          Case Params.DYNAMIC_MODE
             WriteMachiningParam(nIndex, MAC_DYNAMICMODE, m_SelValue.Id, sFilePath)
+         Case Params.FLOORTYPE
+            WriteMachiningParam(nIndex, MAC_FLOORTYPE, m_SelValue.Id, sFilePath)
+         Case Params.CEILTYPE
+            WriteMachiningParam(nIndex, MAC_CEILTYPE, m_SelValue.Id, sFilePath)
+         Case Params.INFILLTYPE
+            WriteMachiningParam(nIndex, MAC_INFILLTYPE, m_SelValue.Id, sFilePath)
       End Select
    End Sub
 
@@ -1317,6 +1626,10 @@ Public Class CheckMachiningParam
                m_bValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLEADOUTINVERT, 0)
             Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
                m_bValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, 0)
+            Case Params.AUXSOLIDSINFILLLINK
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSINFILLLINK, 0)
+            Case Params.INFILLLINK
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_INFILLLINK, 0)
          End Select
       End If
       m_bOrigValue = m_bValue
@@ -1340,6 +1653,10 @@ Public Class CheckMachiningParam
             WriteMachiningParam(nIndex, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0), sFilePath)
          Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
             WriteMachiningParam(nIndex, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, If(m_bValue, 1, 0), sFilePath)
+         Case Params.AUXSOLIDSINFILLLINK
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSINFILLLINK, If(m_bValue, 1, 0), sFilePath)
+         Case Params.INFILLLINK
+            WriteMachiningParam(nIndex, MAC_INFILLLINK, If(m_bValue, 1, 0), sFilePath)
       End Select
    End Sub
 

Icarus/MachiningDb/MachiningDbV.xaml

@@ -140,9 +140,16 @@
                                        <ColumnDefinition Width="2*"/>
                                        <ColumnDefinition Width="1*"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <EgtWPFLib5:EgtTextBox2 Grid.Column="1"
                                                             Text="{Binding sValue, UpdateSourceTrigger=Explicit}"
                                                             Margin="2.5,0,0,0"
@@ -156,9 +163,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="1*"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <ComboBox Grid.Column="1"
                                               ItemsSource="{Binding ValueList}"
                                               SelectedItem="{Binding SelValue}"
@@ -175,9 +189,16 @@
                                        <ColumnDefinition Width="2*"/>
                                        <ColumnDefinition Width="1*"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <CheckBox Grid.Column="1"
                                               IsChecked="{Binding bValue}"
                                               HorizontalAlignment="Center"

Icarus/MainWindow/MainWindowM.vb

@@ -75,13 +75,6 @@ Public Class MainWindowM
       End Get
    End Property
 
-   Private m_bAutoNestOption As Boolean = False
-   Friend ReadOnly Property AutoNestOption As Boolean
-      Get
-         Return m_bAutoNestOption
-      End Get
-   End Property
-
    Friend ReadOnly Property sVersion As String
       Get
          Return My.Application.Info.Version.Major.ToString() & "." &
@@ -189,14 +182,17 @@ Public Class MainWindowM
       Dim sKey As String = String.Empty
       EgtUILib.GetPrivateProfileString(S_LICENCE, K_KEY, "", sKey, sLicFile)
       EgtSetKey(sKey)
-      Dim sNestKey As String = ""
-      EgtUILib.GetPrivateProfileString(S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
-      'EgtSetNestKey(sNestKey)
-      ' Verifico abilitazione nesting automatico
-      m_bAutoNestOption = Not String.IsNullOrWhiteSpace(sNestKey)
+      ' Impostazioni per chiave di rete
+      Dim bNetKey As Boolean = ( GetMainPrivateProfileInt( S_GENERAL, K_NETKEY, 0) = 1)
+      EgtSetNetHwKey( bNetKey)
+      Dim sLockId As String = ""
+      EgtUILib.GetPrivateProfileString( S_LICENCE, K_LOCKID, "", sLockId, sLicFile)
+      If Not String.IsNullOrEmpty( sLockId) Then
+         EgtSetLockId( sLockId)
+      End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5583, 2504, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5583, 2504, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(5583, 2507, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(5583, 2507, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & GENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

Icarus/MainWindow/MainWindowVM.vb

@@ -148,7 +148,7 @@ Public Class MainWindowVM
    End Sub
 
    Private Function ProcessEvents(ByVal nProg As Integer, ByVal nPause As Integer) As Integer
-      If Map.refSliceManagerVM.bCalculating Then
+      If Map.refSliceManagerVM.bCalculating OrElse Map.refSliceManagerVM.bCalcSolid Then
          Map.refSliceManagerVM.ProcessEvents(nProg, nPause)
       End If
       If Not IsNothing(Map.refImportLoadingWndVM) Then

Icarus/My Project/AssemblyInfo.vb

@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.4.2")>
-<Assembly: AssemblyFileVersion("2.5.4.2")>
+<Assembly: AssemblyVersion("2.5.7.1")>
+<Assembly: AssemblyFileVersion("2.5.7.1")>

Icarus/Project/ProjectV.xaml

@@ -2,7 +2,9 @@
            xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
            xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
            xmlns:PrintApp="clr-namespace:Icarus">
-
+   <DockPanel.Resources>
+      <PrintApp:VisibilityToRowConverter x:Key="VisibilityToRowConverter"/>
+   </DockPanel.Resources>
    <Grid DockPanel.Dock="Top">
       <PrintApp:TopPanelV Grid.Column="1"
                           DataContext="{StaticResource TopPanelVM }"/>
@@ -27,12 +29,27 @@
                                         DataContext="{StaticResource SliderManagerVM}"
                                         HorizontalAlignment="Stretch"/>
       <!--StatusBar -->
-      <PrintApp:ControllerInputPanelV Grid.Row="1"
+      <Grid Grid.RowSpan="2"
+            Grid.ColumnSpan="2">
+         <Grid.RowDefinitions>
+            <RowDefinition Height="1*"/>
+            <RowDefinition Height="Auto"/>
+            <RowDefinition Height="67"/>
+         </Grid.RowDefinitions>
+         <PrintApp:MessagePanelV Grid.Row="{Binding DataContext.Message_Visibility, ElementName=ControllerInputPanelV, Converter={StaticResource VisibilityToRowConverter}}"
+                                 Grid.ColumnSpan="2"
+                                 DataContext="{StaticResource StatusBarVM}"/>
+         <PrintApp:ControllerInputPanelV x:Name="ControllerInputPanelV" Grid.Row="2"
+                                         Grid.ColumnSpan="2"
+                                         DataContext="{StaticResource ControllerInputPanelVM}"/>
+      </Grid>
+
+      <!--<PrintApp:ControllerInputPanelV Grid.Row="1"
                                       Grid.ColumnSpan="2"
                                       DataContext="{StaticResource ControllerInputPanelVM}"/>
       <PrintApp:MessagePanelV Grid.Row="1"
                               Grid.ColumnSpan="2"
-                              DataContext="{StaticResource StatusBarVM}"/>
+                              DataContext="{StaticResource StatusBarVM}"/>-->
       <PrintApp:ShowPanelV Grid.Column="2"
                            Grid.Row="1"
                            DataContext="{StaticResource ShowPanelVM}"/>

Icarus/Project/ProjectVM.vb

@@ -3,6 +3,7 @@ Imports EgtWPFLib5
 Imports EgtUILib
 Imports System.Collections.ObjectModel
 Imports System.IO
+Imports System.Globalization
 
 Public Class ProjectVM
    Inherits VMBase
@@ -28,3 +29,15 @@ Public Class ProjectVM
 
 End Class
 
+Public Class VisibilityToRowConverter
+   Implements IValueConverter
+
+   Public Function Convert(ByVal value As Object, ByVal targetType As Type, ByVal parameter As Object, ByVal culture As CultureInfo) As Object Implements IValueConverter.Convert
+      If IsNothing(value) Then Return 2
+      Return If(value = Visibility.Visible, 1, 2)
+   End Function
+
+   Public Function ConvertBack(ByVal value As Object, ByVal targetType As Type, ByVal parameter As Object, ByVal culture As CultureInfo) As Object Implements IValueConverter.ConvertBack
+      Throw New System.NotImplementedException()
+   End Function
+End Class

Icarus/RibPanel/RibPanelVM.vb

@@ -42,6 +42,10 @@ Public Class RibPanelVM
          Return m_SelRib
       End Get
       Set(value As RibEntity)
+         If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse Map.refRibPanelVM.bCPlaneObj_IsActive Then
+            NotifyPropertyChanged(NameOf(SelRib))
+            Return
+         End If
          m_SelRib = value
          EgtDeselectAll()
          If Not IsNothing(value) Then
@@ -374,6 +378,8 @@ Public Class RibPanelVM
             NotifyPropertyChanged(NameOf(bRotate_IsChecked))
             Map.refRightPanelVM.SetSelPanel(RightPanelVM.Panels.RIBPARAM)
             NotifyPropertyChanged(NameOf(RibList_IsEnabled))
+            ' disattivo interfaccia
+            ManageInterface(False)
          Else
             NotifyPropertyChanged(NameOf(m_bMachParam_IsChecked))
          End If
@@ -383,6 +389,8 @@ Public Class RibPanelVM
       m_bMachParam_IsChecked = False
       NotifyPropertyChanged(NameOf(bMachParam_IsChecked))
       NotifyPropertyChanged(NameOf(RibList_IsEnabled))
+      ' riattivo interfaccia
+      ManageInterface(True)
    End Sub
 
    Public ReadOnly Property Compo_Visibility As Visibility
@@ -391,11 +399,17 @@ Public Class RibPanelVM
       End Get
    End Property
 
+   Private m_RibList_IsEnabled As Boolean = False
    Public ReadOnly Property RibList_IsEnabled As Boolean
       Get
-         Return Not m_bMachParam_IsChecked
+         Return If(m_RibList.Count > 0, m_RibList_IsEnabled, False)
       End Get
    End Property
+   Friend Sub SetRibListIsEnabled(bValue As Boolean)
+      m_RibList_IsEnabled = bValue
+      NotifyPropertyChanged(NameOf(RibList_IsEnabled))
+   End Sub
+
    ' riferimento griglia all'ingresso in questa pagina
    Private m_OriginalGridFrame As New Frame3d
 
@@ -413,6 +427,8 @@ Public Class RibPanelVM
       End Get
    End Property
 
+   Private m_bEscOnLine2P As Boolean = False
+
 #Region "Tooltip"
 
    Public ReadOnly Property Import_ToolTip As String
@@ -596,6 +612,8 @@ Public Class RibPanelVM
          SelRib = m_RibList(0)
          NotifyPropertyChanged(NameOf(SelRib))
       End If
+      ' abilito lista ribs
+      SetRibListIsEnabled(True)
       Map.refSceneHostVM.MainScene.SetStatusNull()
    End Sub
 
@@ -631,8 +649,13 @@ Public Class RibPanelVM
             EgtSelectObj(m_SelRib.nCurveId)
          Case RibSelectionTypes.EXTRUSION
             ' creo layer per estrusione
-            Dim nNewExtrusionLayerId As Integer = EgtCreateGroup(m_nPartId)
-            EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
+            Dim nNewExtrusionLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWEXTRUSION)
+            If nNewExtrusionLayerId = GDB_ID.NULL Then
+               nNewExtrusionLayerId = EgtCreateGroup(m_nPartId)
+               EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
+            Else
+               EgtEmptyGroup(nNewExtrusionLayerId)
+            End If
             EgtSetCurrPartLayer(m_nPartId, nNewExtrusionLayerId)
             EgtSelectObj(m_SelRib.nCurveId)
          Case RibSelectionTypes.BOTH
@@ -640,6 +663,8 @@ Public Class RibPanelVM
             EgtSelectObj(m_SelRib.nExtrusionId)
       End Select
       EgtDraw()
+      ' disattivo il resto dell'interfaccia
+      ManageInterface(False)
       Return True
    End Function
 
@@ -649,6 +674,7 @@ Public Class RibPanelVM
    End Sub
 
    Friend Sub OnExecCmdEnd(command As Controller.CMD)
+      m_bEscOnLine2P = False
       Select Case command
          Case Controller.CMD.MODIFYCURVE, Controller.CMD.ADDPOINTCURVE, Controller.CMD.REMOVEPOINTCURVE
             ' leggo altezza estrusione
@@ -688,6 +714,10 @@ Public Class RibPanelVM
             ' Imposto flag di ricalcolo slice
             EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
       End Select
+      ' se non ho creato percorso riabilito interfaccia
+      If Not m_bIsCreatingPath Then
+         ManageInterface(True)
+      End If
       If command <> Controller.CMD.LINE2P AndAlso command <> Controller.CMD.EXTRUDE Then Return
       ' se finita creazione estrusione
       If m_bIsCreatingExtrusion Then
@@ -754,9 +784,10 @@ Public Class RibPanelVM
             EgtSelectObj(nNewEntityId)
             If Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.EXTRUDE) Then
                m_bIsCreatingExtrusion = True
+               If Not EgtCurveIsClosed(nNewEntityId) Then
+                  m_bEscOnLine2P = True
+               End If
             Else
-               ' cancello layer
-               'EgtErase(nNewRibLayerId)
                EgtErase(nNewExtrusionLayerId)
             End If
          End If
@@ -779,6 +810,13 @@ Public Class RibPanelVM
             ' rimetto la selezione scena a null
             Map.refSceneHostVM.MainScene.SetStatusNull()
          End If
+         ' se esc su creazione percorso, lo annullo, altrimenti riabilito interfaccia
+         If m_bEscOnLine2P Then
+            m_bEscOnLine2P = False
+         Else
+            If m_bIsCreatingExtrusion Then m_bIsCreatingExtrusion = False
+            ManageInterface(True)
+         End If
       End If
    End Sub
 
@@ -814,6 +852,18 @@ Public Class RibPanelVM
       Return nRibIndex + 1
    End Function
 
+   Friend Sub ManageInterface(bValue As Boolean)
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(bValue)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(bValue)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(bValue)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(bValue)
+      Map.refInstrumentPanelVM.SetInstrumentPanelIsEnabled(bValue)
+      SetRibListIsEnabled(bValue)
+   End Sub
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -837,7 +887,9 @@ Public Class RibPanelVM
    ''' </summary>
    Public Sub Import(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.InsertRib()
+      ManageInterface(True)
    End Sub
 
 #End Region ' Import
@@ -861,6 +913,7 @@ Public Class RibPanelVM
    ''' </summary>
    Public Sub Line2P(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Dim nNewRibLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWRIB)
       If nNewRibLayerId = GDB_ID.NULL Then nNewRibLayerId = EgtCreateGroup(m_nPartId)
       EgtSetName(nNewRibLayerId, LAY_NEWRIB)
@@ -905,10 +958,11 @@ Public Class RibPanelVM
          Else
             SelRib = Nothing
             m_bEdit_IsChecked = False
-            NotifyPropertyChanged(NameOf( bEdit_IsChecked))
+            NotifyPropertyChanged(NameOf(bEdit_IsChecked))
          End If
          NotifyPropertyChanged(NameOf(SelRib))
       End If
+      SetRibListIsEnabled(True)
    End Sub
 
 #End Region    ' Delete
@@ -1192,6 +1246,7 @@ Public Class RibPanelVM
    ''' </summary>
    Public Sub CPlaneElevation(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ELEVATION)
    End Sub
 
@@ -1216,6 +1271,7 @@ Public Class RibPanelVM
    ''' </summary>
    Public Sub CPlaneOrigin(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ORIGIN)
    End Sub
 
@@ -1332,6 +1388,7 @@ Public Class RibPanelVM
    ''' </summary>
    Public Sub CPlaneObj(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       ' salvo selezione precedente e deseleziono altri oggetti
       m_PrevSelObjs.Clear()
       Dim nSelObjId As Integer = EgtGetFirstSelectedObj()

Icarus/RibParamPanel/RibParamPanelVM.vb

@@ -135,6 +135,8 @@ Public Class RibParamPanelVM
             Map.refSliceManagerVM.UpdateDimensions()
          End If
       End If
+      ' riattivo lista ribs
+      Map.refRibPanelVM.SetRibListIsEnabled(False)
       ' ripristino modalita' standard
       Map.refRightPanelVM.SetSelPanel(RightPanelVM.Panels.NULL)
       Map.refRibPanelVM.ResetMachParamIsChecked()

Icarus/SceneHost/MySceneHostVM.vb

@@ -274,8 +274,6 @@ Public Class MySceneHostVM
       bOk = MainController.OpenProject(sFilePath, False)
       ' Imposto stato gestione mouse diretto della scena a nessuno
       MainScene.SetStatusNull()
-      ' imposto modalita' import
-      Map.refTopPanelVM.SelPage = Pages.NULL
       Return bOk
    End Function
 

Icarus/ShellNumberPanel/ShellNumberPanelVM.vb

@@ -40,6 +40,10 @@ Public Class ShellNumberPanelVM
          Return m_SelShellNumber
       End Get
       Set(value As ShellNumberEntity)
+         If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse Map.refShellNumberPanelVM.bCPlaneObj_IsActive Then
+            NotifyPropertyChanged(NameOf(SelShellNumber))
+            Return
+         End If
          m_SelShellNumber = value
          EgtDeselectAll()
          If Not IsNothing(value) Then
@@ -354,6 +358,8 @@ Public Class ShellNumberPanelVM
             NotifyPropertyChanged(NameOf(bRotate_IsChecked))
             Map.refRightPanelVM.SetSelPanel(RightPanelVM.Panels.SHELLNUMBERPARAM)
             NotifyPropertyChanged(NameOf(ShellNumberList_IsEnabled))
+            ' disattivo interfaccia
+            ManageInterface(False)
          Else
             NotifyPropertyChanged(NameOf(m_bMachParam_IsChecked))
          End If
@@ -363,6 +369,8 @@ Public Class ShellNumberPanelVM
       m_bMachParam_IsChecked = False
       NotifyPropertyChanged(NameOf(bMachParam_IsChecked))
       NotifyPropertyChanged(NameOf(ShellNumberList_IsEnabled))
+      ' riattivo interfaccia
+      ManageInterface(True)
    End Sub
 
    Public ReadOnly Property Compo_Visibility As Visibility
@@ -371,11 +379,17 @@ Public Class ShellNumberPanelVM
       End Get
    End Property
 
+   Private m_ShellNumberList_IsEnabled As Boolean = False
    Public ReadOnly Property ShellNumberList_IsEnabled As Boolean
       Get
-         Return Not m_bMachParam_IsChecked
+         Return If(m_ShellNumberList.Count > 0, m_ShellNumberList_IsEnabled, False)
       End Get
    End Property
+   Friend Sub SetShellNumberListIsEnabled(bValue As Boolean)
+      m_ShellNumberList_IsEnabled = bValue
+      NotifyPropertyChanged(NameOf(ShellNumberList_IsEnabled))
+   End Sub
+
    ' riferimento griglia all'ingresso in questa pagina
    Private m_OriginalGridFrame As New Frame3d
 
@@ -393,6 +407,8 @@ Public Class ShellNumberPanelVM
       End Get
    End Property
 
+   Private m_bEscOnLine2P As Boolean = False
+
 #Region "Tooltip"
 
    Public ReadOnly Property Import_ToolTip As String
@@ -576,6 +592,8 @@ Public Class ShellNumberPanelVM
          SelShellNumber = m_ShellNumberList(0)
          NotifyPropertyChanged(NameOf(SelShellNumber))
       End If
+      ' abilito lista shell number
+      SetShellNumberListIsEnabled(True)
       Map.refSceneHostVM.MainScene.SetStatusNull()
    End Sub
 
@@ -611,8 +629,13 @@ Public Class ShellNumberPanelVM
             EgtSelectObj(m_SelShellNumber.nCurveId)
          Case ShellNumberSelectionTypes.EXTRUSION
             ' creo layer per estrusione
-            Dim nNewExtrusionLayerId As Integer = EgtCreateGroup(m_nPartId)
-            EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
+            Dim nNewExtrusionLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWEXTRUSION)
+            If nNewExtrusionLayerId = GDB_ID.NULL Then
+               nNewExtrusionLayerId = EgtCreateGroup(m_nPartId)
+               EgtSetName(nNewExtrusionLayerId, LAY_NEWEXTRUSION)
+            Else
+               EgtEmptyGroup(nNewExtrusionLayerId)
+            End If
             EgtSetCurrPartLayer(m_nPartId, nNewExtrusionLayerId)
             EgtSelectObj(m_SelShellNumber.nCurveId)
          Case ShellNumberSelectionTypes.BOTH
@@ -620,6 +643,8 @@ Public Class ShellNumberPanelVM
             EgtSelectObj(m_SelShellNumber.nExtrusionId)
       End Select
       EgtDraw()
+      ' disattivo il resto dell'interfaccia
+      ManageInterface(False)
       Return True
    End Function
 
@@ -629,6 +654,7 @@ Public Class ShellNumberPanelVM
    End Sub
 
    Friend Sub OnExecCmdEnd(command As Controller.CMD)
+      m_bEscOnLine2P = False
       Select Case command
          Case Controller.CMD.MODIFYCURVE, Controller.CMD.ADDPOINTCURVE, Controller.CMD.REMOVEPOINTCURVE
             ' leggo altezza estrusione
@@ -668,6 +694,10 @@ Public Class ShellNumberPanelVM
             ' Imposto flag di ricalcolo slice
             EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
       End Select
+      ' se non ho creato percorso riabilito interfaccia
+      If Not m_bIsCreatingPath Then
+         ManageInterface(True)
+      End If
       If command <> Controller.CMD.LINE2P AndAlso command <> Controller.CMD.EXTRUDE Then Return
       ' se finita creazione estrusione
       If m_bIsCreatingExtrusion Then
@@ -710,6 +740,7 @@ Public Class ShellNumberPanelVM
          If NewGeomType = GDB_TY.CRV_COMPO Then
             If Not EgtCurveIsClosed(nNewEntityId) Then
                EgtCloseCurveCompo(nNewEntityId)
+               m_bEscOnLine2P = True
             End If
             EgtSetName(nNewEntityId, RIB_CURVE)
             ' resetto colore entita'
@@ -762,6 +793,13 @@ Public Class ShellNumberPanelVM
             ' rimetto la selezione scena a null
             Map.refSceneHostVM.MainScene.SetStatusNull()
          End If
+         ' se esc su creazione percorso, lo annullo, altrimenti riabilito interfaccia
+         If m_bEscOnLine2P Then
+            m_bEscOnLine2P = False
+         Else
+            If m_bIsCreatingExtrusion Then m_bIsCreatingExtrusion = False
+            ManageInterface(True)
+         End If
       End If
    End Sub
 
@@ -797,6 +835,19 @@ Public Class ShellNumberPanelVM
       Return nShellNumberIndex + 1
    End Function
 
+   Friend Sub ManageInterface(bValue As Boolean)
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(bValue)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(bValue)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(bValue)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(bValue)
+      Map.refInstrumentPanelVM.SetInstrumentPanelIsEnabled(bValue)
+      SetShellNumberListIsEnabled(bValue)
+   End Sub
+
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -820,7 +871,9 @@ Public Class ShellNumberPanelVM
    ''' </summary>
    Public Sub Import(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.InsertShellNumber()
+      ManageInterface(True)
    End Sub
 
 #End Region ' Import
@@ -844,6 +897,7 @@ Public Class ShellNumberPanelVM
    ''' </summary>
    Public Sub Line2P(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Dim nNewShellNumberLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWRIB)
       If nNewShellNumberLayerId = GDB_ID.NULL Then nNewShellNumberLayerId = EgtCreateGroup(m_nPartId)
       EgtSetName(nNewShellNumberLayerId, LAY_NEWRIB)
@@ -892,6 +946,7 @@ Public Class ShellNumberPanelVM
          End If
          NotifyPropertyChanged(NameOf(SelShellNumber))
       End If
+      SetShellNumberListIsEnabled(True)
    End Sub
 
 #End Region    ' Delete
@@ -1176,6 +1231,7 @@ Public Class ShellNumberPanelVM
    ''' </summary>
    Public Sub CPlaneElevation(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ELEVATION)
    End Sub
 
@@ -1200,6 +1256,7 @@ Public Class ShellNumberPanelVM
    ''' </summary>
    Public Sub CPlaneOrigin(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ORIGIN)
    End Sub
 
@@ -1316,6 +1373,7 @@ Public Class ShellNumberPanelVM
    ''' </summary>
    Public Sub CPlaneObj(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       ' salvo selezione precedente e deseleziono altri oggetti
       m_PrevSelObjs.Clear()
       Dim nSelObjId As Integer = EgtGetFirstSelectedObj()

Icarus/SliceManager/SliceManagerVM.vb

@@ -44,6 +44,11 @@ Public Class SliceManagerVM
    Private m_bCalcTFS As Boolean = False
    Private m_bGenerate As Boolean = False
    Private m_bCalcSolid As Boolean = False
+   Friend ReadOnly Property bCalcSolid As Boolean
+      Get
+         Return m_bCalcSolid
+      End Get
+   End Property
    Friend Sub SetCalcSolid(value As Boolean)
       m_bCalcSolid = value
    End Sub
@@ -526,6 +531,8 @@ Public Class SliceManagerVM
    ''' Execute the CPlaneTop.  This method is invoked by the CPlaneTopCommand.
    ''' </summary>
    Public Sub Slice()
+      If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse Map.refStartMachPanelVM.bCPlaneObj_IsActive OrElse Map.refRibPanelVM.bCPlaneObj_IsActive OrElse
+         Map.refShellNumberPanelVM.bCPlaneObj_IsActive OrElse Map.refFilledSolidPanelVM.bCPlaneObj_IsActive Then Return
       If m_bCalculating Then Return
       m_bCalculating = True
       If IsNothing(Map.refTopPanelVM.SelPart) Then

Icarus/StartMachPanel/StartMachPanelV.xaml

@@ -28,6 +28,7 @@
              ItemsSource="{Binding StartList}"
              SelectedItem="{Binding SelStart}"
              DisplayMemberPath="ghName"
+             IsEnabled="{Binding StartList_IsEnabled}"
              Style="{StaticResource LeftPanel_ComboBox}"/>
    <!-- Add Button -->
    <ToggleButton x:Name="AddBtn"

Icarus/StartMachPanel/StartMachPanelVM.vb

@@ -35,6 +35,10 @@ Public Class StartMachPanelVM
          Return m_SelStart
       End Get
       Set(value As StartEntity)
+         If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse Map.refStartMachPanelVM.bCPlaneObj_IsActive Then
+            NotifyPropertyChanged(NameOf(SelStart))
+            Return
+         End If
          m_SelStart = value
          EgtDeselectAll()
          If Not IsNothing(value) Then
@@ -293,6 +297,18 @@ Public Class StartMachPanelVM
       End Get
    End Property
 
+   Private m_StartList_IsEnabled As Boolean = False
+   Public ReadOnly Property StartList_IsEnabled As Boolean
+      Get
+         Return If(m_StartList.Count > 0, m_StartList_IsEnabled, False)
+      End Get
+   End Property
+   Friend Sub SetStartListIsEnabled(bValue As Boolean)
+      m_StartList_IsEnabled = bValue
+      NotifyPropertyChanged(NameOf(StartList_IsEnabled))
+   End Sub
+
+
    ' riferimento griglia all'ingresso in questa pagina
    Private m_OriginalGridFrame As New Frame3d
 
@@ -304,6 +320,8 @@ Public Class StartMachPanelVM
       End Get
    End Property
 
+   Private m_bEscOnLine2P As Boolean = False
+
 #Region "Tooltip"
 
    Public ReadOnly Property Point_ToolTip As String
@@ -458,6 +476,8 @@ Public Class StartMachPanelVM
          SelStart = m_StartList(0)
          NotifyPropertyChanged(NameOf(SelStart))
       End If
+      ' abilito lista start mach
+      SetStartListIsEnabled(True)
       Map.refSceneHostVM.MainScene.SetStatusNull()
    End Sub
 
@@ -481,16 +501,33 @@ Public Class StartMachPanelVM
       ' seleziono percorso corrente
       EgtDeselectAll()
       EgtSelectObj(m_SelStart.nId)
+      EgtDraw()
+      ' disattivo il resto dell'interfaccia
+      ManageInterface(False)
       Return True
    End Function
 
    Friend Sub UpdateUI()
       ' se attiva operazione in piu' passaggi, esco
       If Map.refSceneHostVM.MainController.GetContinue() Then Return
-      Dim NewEntity As StartEntity = Nothing
-      ' se finita creazione curva (è stata chiusa)
+   End Sub
+
+   Friend Sub OnExecCmdEnd(command As Controller.CMD)
+      m_bEscOnLine2P = False
+      Select Case command
+         Case Controller.CMD.LINE2P, Controller.CMD.DELETE, Controller.CMD.MODIFYCURVE, Controller.CMD.ADDPOINTCURVE, Controller.CMD.REMOVEPOINTCURVE,
+              Controller.CMD.MOVE, Controller.CMD.ROTATE
+            ' Imposto flag di ricalcolo slice
+            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
+            ' rimetto la selezione scena a null
+            Map.refSceneHostVM.MainScene.SetStatusNull()
+      End Select
+      ' riabilito interfaccia
+      ManageInterface(True)
+      ' se finita creazione curva
       If bIsCreatingPath Then
          m_bIsCreatingPath = False
+         Dim NewEntity As StartEntity = Nothing
          Dim nNewStartLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWSTART)
          Dim nNewEntityId As Integer = EgtGetFirstInGroup(nNewStartLayerId)
          Dim NewGeomType As GDB_TY = EgtGetType(nNewEntityId)
@@ -503,37 +540,22 @@ Public Class StartMachPanelVM
                   NewEntityType = StartMachTypes.COMPO
             End Select
             EgtSetName(nNewEntityId, START_GEOM)
-            ' coloro l'entita' di rosso
-            Dim c3Red As Color3d
-            c3Red.FromColor(System.Drawing.Color.Red)
-            EgtSetColor(nNewEntityId, c3Red)
+            ' resetto colore entita'
+            EgtResetColor(nNewEntityId)
             ' lo sposto nel layer degli start
             EgtRelocateGlob(nNewEntityId, m_nStartMachLayerId, GDB_POS.LAST_SON)
             ' lo aggiungo alla lista
             NewEntity = New StartEntity(nNewEntityId, NewEntityType)
             m_StartList.Add(NewEntity)
-            ' cancello layer di disegno
-            EgtErase(nNewStartLayerId)
+            ' lo seleziono
+            SelStart = NewEntity
+            NotifyPropertyChanged(NameOf(SelStart))
          End If
+         ' cancello layer di disegno
+         EgtErase(nNewStartLayerId)
       End If
       ' aggiorno posizione
       RefreshPos()
-      ' se aggiunta entita'
-      If Not IsNothing(NewEntity) Then
-         SelStart = NewEntity
-         NotifyPropertyChanged(NameOf(SelStart))
-      End If
-      ' rimetto la selezione scena a null
-      Map.refSceneHostVM.MainScene.SetStatusNull()
-   End Sub
-
-   Friend Sub OnExecCmdEnd(command As Controller.CMD)
-      Select Case command
-         Case Controller.CMD.LINE2P, Controller.CMD.DELETE, Controller.CMD.MODIFYCURVE, Controller.CMD.ADDPOINTCURVE, Controller.CMD.REMOVEPOINTCURVE,
-              Controller.CMD.MOVE, Controller.CMD.ROTATE
-            ' Imposto flag di ricalcolo slice
-            EgtSetInfo(Map.refTopPanelVM.SelPart.nPartId, MAC_TORECALC_SLICE, True)
-      End Select
    End Sub
 
    Friend Sub OnKeyDown(Key As Forms.Keys)
@@ -550,6 +572,12 @@ Public Class StartMachPanelVM
             ' rimetto la selezione scena a null
             Map.refSceneHostVM.MainScene.SetStatusNull()
          End If
+         ' se esc su creazione percorso, lo annullo, altrimenti riabilito interfaccia
+         If m_bEscOnLine2P Then
+            m_bEscOnLine2P = False
+         Else
+            ManageInterface(True)
+         End If
       End If
    End Sub
 
@@ -565,6 +593,18 @@ Public Class StartMachPanelVM
       End If
    End Sub
 
+   Friend Sub ManageInterface(bValue As Boolean)
+      ' disabilito ProjManager, TopPanel, TFS, Slider, bottoni e uscita dal programma
+      Map.refProjManagerVM.SetProjCmdIsEnabled(bValue)
+      Map.refTopPanelVM.SetTopPanelIsEnabled(bValue)
+      Map.refViewLayerManagerVM.SetViewLayerManagerIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerIndexIsEnabled(bValue)
+      Map.refSliderManagerVM.SetLayerAdvancementIsEnabled(bValue)
+      Map.refSliceManagerVM.SetButtonsIsEnabled(bValue)
+      Map.refInstrumentPanelVM.SetInstrumentPanelIsEnabled(bValue)
+      SetStartListIsEnabled(bValue)
+   End Sub
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -588,13 +628,13 @@ Public Class StartMachPanelVM
    ''' </summary>
    Public Sub Point(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
-      Dim nNewStartLayerId As Integer = EgtGetFirstNameInGroup( m_nPartId, LAY_NEWSTART)
+      ManageInterface(False)
+      Dim nNewStartLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWSTART)
       If nNewStartLayerId = GDB_ID.NULL Then
          nNewStartLayerId = EgtCreateGroup(m_nPartId)
          EgtSetName(nNewStartLayerId, LAY_NEWSTART)
       End If
       EgtSetCurrPartLayer(m_nPartId, nNewStartLayerId)
-      'InitCommand(True)
       If Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.POINT) Then
          m_bIsCreatingPath = True
       End If
@@ -621,7 +661,8 @@ Public Class StartMachPanelVM
    ''' </summary>
    Public Sub Line2P(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
-      Dim nNewStartLayerId As Integer = EgtGetFirstNameInGroup( m_nPartId, LAY_NEWSTART)
+      ManageInterface(False)
+      Dim nNewStartLayerId As Integer = EgtGetFirstNameInGroup(m_nPartId, LAY_NEWSTART)
       If nNewStartLayerId = GDB_ID.NULL Then
          nNewStartLayerId = EgtCreateGroup(m_nPartId)
          EgtSetName(nNewStartLayerId, LAY_NEWSTART)
@@ -888,6 +929,7 @@ Public Class StartMachPanelVM
    ''' </summary>
    Public Sub CPlaneElevation(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ELEVATION)
    End Sub
 
@@ -912,6 +954,7 @@ Public Class StartMachPanelVM
    ''' </summary>
    Public Sub CPlaneOrigin(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.GRID_ORIGIN)
    End Sub
 
@@ -952,6 +995,7 @@ Public Class StartMachPanelVM
    ''' </summary>
    Public Sub CPlaneObj(ByVal param As Object)
       If Map.refSceneHostVM.MainController.GetStep <> 0 OrElse m_bCPlaneObj_IsActive Then Return
+      ManageInterface(False)
       ' salvo selezione precedente e deseleziono altri oggetti
       m_PrevSelObjs.Clear()
       Dim nSelObjId As Integer = EgtGetFirstSelectedObj()
@@ -1012,6 +1056,7 @@ Public Class StartMachPanelVM
          End If
          NotifyPropertyChanged(NameOf(SelStart))
       End If
+      SetStartListIsEnabled(True)
    End Sub
 
 #End Region    ' Delete

Icarus/TSFEditor/TFSEditorVM.vb

@@ -337,7 +337,7 @@ Public Class TFSEditorVM
 
    Public ReadOnly Property Seconds_Msg As String
       Get
-         Return "s"
+         Return "min:s"
       End Get
    End Property
 

Icarus/TopPanel/TopPanelV.xaml

@@ -58,7 +58,7 @@
       <ToggleButton x:Name="ModifyBtn"
                     Grid.Column="2"
                     Grid.Row="1"          
-                    Content="{Binding SelectedItem.sName, ElementName=ModifyModeListBox}"
+                    Content="{Binding SelModifyModeName}"
                     IsChecked="{Binding bModify_IsChecked}"  
                     Margin="2.5,0,2.5,0"
                     Style="{StaticResource TopPanel_Modify_ToggleButton}">

Icarus/TopPanel/TopPanelVM.vb

@@ -121,6 +121,7 @@ Public Class TopPanelVM
             Map.refLeftPanelVM.SetSelPanel(LeftPanelVM.Panels.NULL)
             NotifyPropertyChanged(NameOf(SelModifyMode))
          End If
+         NotifyPropertyChanged(NameOf(SelModifyModeName))
          ' chiudo il popup
          SetModifyIsChecked(False)
       End Set
@@ -128,8 +129,15 @@ Public Class TopPanelVM
    Friend Sub SetSelModifyMode(ModifyMode As ModifyModes)
       SelModifyMode = m_ModifyModeList.FirstOrDefault(Function(x) x.ModifyMode = ModifyMode)
       NotifyPropertyChanged(NameOf(SelModifyMode))
+      NotifyPropertyChanged(NameOf(SelModifyModeName))
    End Sub
 
+   Public ReadOnly Property SelModifyModeName As String
+      Get
+         Return If(Not IsNothing(m_SelModifyMode) AndAlso m_SelModifyMode.ModifyMode <> ModifyModes.NULL, m_SelModifyMode.sName, "Modify")
+      End Get
+   End Property
+
    Private m_bModify_IsChecked As Boolean
    Public Property bModify_IsChecked As Boolean
       Get
@@ -266,7 +274,27 @@ Public Class TopPanelVM
             WriteMainPrivateProfileString(S_PRINTING3D, K_CURRMACHINING, value.sGUID.ToString())
             ' imposto selezionata come corrente
             If Not IsNothing(m_SelPart) AndAlso (IsNothing(m_SelMachining) OrElse value.sGUID <> m_SelMachining.sGUID) Then
+               Dim GeneralCathegory As MachiningCathegory = Map.refTopPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL)
+               Dim OldSlicingTypeValue As Machining.MPAR_SLICINGTYPE = Nothing
+               Dim NewSlicingTypeValue As Machining.MPAR_SLICINGTYPE = Nothing
+               If Not IsNothing(GeneralCathegory) Then
+                  Dim SlicingTypeParam As ComboMachiningParam = GeneralCathegory.MachiningParamList.FirstOrDefault(Function(x) x.Type = MachiningParam.Params.SLICINGTYPE)
+                  If Not IsNothing(SlicingTypeParam) Then
+                     OldSlicingTypeValue = SlicingTypeParam.SelValue.Id
+                  End If
+               End If
                Map.refCurrMachiningPanelVM.SetCurrMachining(New CurrMachining(m_SelPart.nPartId, value.nIndex))
+               GeneralCathegory = Map.refTopPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL)
+               If Not IsNothing(GeneralCathegory) Then
+                  Dim SlicingTypeParam As ComboMachiningParam = GeneralCathegory.MachiningParamList.FirstOrDefault(Function(x) x.Type = MachiningParam.Params.SLICINGTYPE)
+                  If Not IsNothing(SlicingTypeParam) Then
+                     NewSlicingTypeValue = SlicingTypeParam.SelValue.Id
+                  End If
+               End If
+               If IsNothing(OldSlicingTypeValue) OrElse IsNothing(NewSlicingTypeValue) OrElse OldSlicingTypeValue <> NewSlicingTypeValue Then
+                  ' aggiorno area di estrusione
+                  CurrentMachine.UpdateExtrusionArea()
+               End If
             End If
          End If
          m_SelMachining = value

Icarus/Utility/CurrentMachine.vb

@@ -79,6 +79,14 @@ Public Module CurrentMachine
       End Get
    End Property
 
+   ' altezza massima di estrusione impostata in file ini macchina
+   Private m_dSlicingMaxHeight As Double
+   Public ReadOnly Property dSlicingMaxHeight As Double
+      Get
+         Return m_dSlicingMaxHeight
+      End Get
+   End Property
+
 #Region "Init"
 
    Sub InitCurrentMachine(sMachinesRootDir As String, sMachineName As String)
@@ -97,6 +105,8 @@ Public Module CurrentMachine
       m_sMachiningFilePath = sMachinesRootDir & "\" & sMachineName & "\Machinings\Machinings.ini"
       ' impostazione cartella materiali
       m_sMaterialFilePath = sMachinesRootDir & "\" & sMachineName & "\Materials\Materials.ini"
+      ' leggo altezza massima estrusione impostata su macchina
+      m_dSlicingMaxHeight = GetPrivateProfileDouble(S_MACH_PRINTING3D, K_MAX_HEIGHT, 900, m_sMachIniFile)
       ' Disabilito segnalazione modificato
       Dim DisableMgr As New DisableModifiedMgr
       ' recupero box macchina