Lettura degli interi Bit a Bit

CadCuts/SplitAuto.vb

@@ -38,6 +38,8 @@ Public Module SplitAuto
       Public m_dStartFreeLen As Double
       Public m_dEndFreeLen As Double
       Public m_vtDir As Vector3d
+      ' ver 2.6f4: tagli corti gestiti con LeadIn.OUT/LeadOut.OUT
+      Public m_bMngLeadInOnIntCorner As Boolean
    End Class
 
    '-----------------------------------------------------------------------------------------------
@@ -111,15 +113,19 @@ Public Module SplitAuto
                      EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
                      If Mach.m_bInvert Then Mach.m_vtDir = -Mach.m_vtDir
                      Mach.m_nEntId = nEntId
+                     EgtGetInfo(nOperId, "ManageLeadInOnIntCorner", Mach.m_bMngLeadInOnIntCorner)
                   End If
                   ' verifico se trasformabile in un taglio di separazione (almeno da un lato)
-                  If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL) And
+                  If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
                      Mach.m_sLay = NAME_OUTLOOP And Mach.m_nInterf = FMI_TYPE.NONE Then
                      Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
-                     Mach.m_bCanStartAll = (dStartAddLen > -EPS_SMALL And (nRes And CAR_RES.LI_OK) <> 0) And
-                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine
-                     Mach.m_bCanEndAll = (dEndAddLen > -EPS_SMALL And (nRes And CAR_RES.LO_OK) <> 0) And
-                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine
+                     Dim bIn As Boolean = False
+                     Dim bOut As Boolean = False
+                     CanExtendSides(Mach, bIn, bOut)
+                     Mach.m_bCanStartAll = ((dStartAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LI_OK) <> 0) And
+                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine And bIn
+                     Mach.m_bCanEndAll = ((dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LO_OK) <> 0) And
+                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine And bOut
                      If nRes = 0 Then
                         EgtOutLog("Operation ID " & nOperId.ToString & " isn't split cut! verify depth machining.")
                      End If
@@ -171,6 +177,26 @@ Public Module SplitAuto
       Return True
    End Function
 
+   Private Function CanExtendSides(CurrMach As SplitMach, ByRef bIn As Boolean, ByRef bOut As Boolean) As Boolean
+      If CurrMach.m_dPrevAng < -EPS_ANG_SMALL And CurrMach.m_dNextAng > EPS_ANG_SMALL Then
+         ' Posso estendere SOLO l'uscita
+         bOut = True
+         bIn = False
+      ElseIf CurrMach.m_dPrevAng > EPS_ANG_SMALL And CurrMach.m_dNextAng < -EPS_ANG_SMALL Then
+         ' Posso estendere SOLO l'ingresso
+         bIn = True
+         bOut = False
+      ElseIf CurrMach.m_dPrevAng < -EPS_ANG_SMALL And CurrMach.m_dNextAng < -EPS_ANG_SMALL Then
+         ' NON Posso estendere
+         bIn = False
+         bOut = False
+      Else
+         bIn = True
+         bOut = True
+      End If
+      Return True
+   End Function
+
    '-----------------------------------------------------------------------------------------------
    ' calcolo il numero di tipi di lavorazioni
    Friend Sub CountMachiningType(MachSplit As SplitMach, ByRef nCountSawing As Integer, ByRef nCountWaterjetting As Integer, ByRef nCountOtherMachining As Integer)
@@ -799,13 +825,13 @@ Public Module SplitAuto
 
    Private Function ExecMove(nDispId As Integer, vNewRaws As List(Of Integer),
                              vtMove As Vector3d, dMinMove As Double) As Boolean
-      Dim bTwoHeadVac As Boolean = ( EgtGetHeadId( VACUUM_HEAD_2) <> GDB_ID.NULL)
+      Dim bTwoHeadVac As Boolean = (EgtGetHeadId(VACUUM_HEAD_2) <> GDB_ID.NULL)
       Dim rmData As New RawMoveData
       Dim vtMove2 As Vector3d = -vtMove
 
       VacuumCups.ResetHeadName()
       Dim bPutVacuum As Boolean = PutVacuumCupsOnRaw(vNewRaws(1), rmData)
-      If Not bPutVacuum And bTwoHeadVac Then bPutVacuum= PutVacuumCupsOnRaw(vNewRaws(1), rmData)
+      If Not bPutVacuum And bTwoHeadVac Then bPutVacuum = PutVacuumCupsOnRaw(vNewRaws(1), rmData)
       If bPutVacuum AndAlso SafeMoveRawPart(vNewRaws(1), vtMove, dMinMove) Then
          rmData.m_vtRawMove = vtMove
          SaveOneMoveInfoInDisposition(nDispId, rmData)
@@ -826,9 +852,9 @@ Public Module SplitAuto
 
    Private Function SafeMoveRawPart(nRawId As Integer, ByRef vtMove As Vector3d, dMindist As Double) As Boolean
       ' Spostamento originale
-      Dim vtOriMove As New Vector3d( vtMove)
+      Dim vtOriMove As New Vector3d(vtMove)
       ' Livello di movimento
-      Dim nMoveLevel As Integer = GetPrivateProfileInt( S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
+      Dim nMoveLevel As Integer = GetPrivateProfileInt(S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
       Dim nMove As Integer = 1
       ' Se esce dalla tavola, movimento già annullato ed esco con errore
       If Not EgtMoveRawPart(nRawId, vtOriMove) Then Return False
@@ -863,7 +889,7 @@ Public Module SplitAuto
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
             vtMove += 0.5 * vtOriMove
             nMove += 1
-            If nMoveLevel = nMove Then return True
+            If nMoveLevel = nMove Then Return True
          Else
             EgtMoveRawPart(nRawId, -0.5 * vtOriMove)
          End If

CadCuts/SplitPageUC.xaml.vb

@@ -61,6 +61,9 @@ Public Class SplitPageUC
    ' Abilita la mofica Inizio fine per i tagli interni sugli angoli
    Private m_StartEndModifyOnIntCorner As Boolean = False
 
+   Private m_IsCtrlKeyDown As Boolean = False
+   Private m_IsShiftKeyDown As Boolean = False
+
    Private Sub SplitPageUC_Initialized(sender As Object, e As EventArgs)
       PrevBtn.IsEnabled = False
       ' Collego lista di oggetti a ListBox
@@ -453,6 +456,24 @@ Public Class SplitPageUC
 
 #End Region    ' Bridge
 
+   Private Sub OnMyMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene_DoubleClick
+      If MachiningLsBx.SelectedItems.Count = 1 Then
+         OnMyMouseDownScene(sender, e)
+         Dim x As NameIdLsBxItem = DirectCast(MachiningLsBx.SelectedItems(0), NameIdLsBxItem)
+         Dim nI As Integer = x.Ind
+         If m_MachiningList(nI).m_bEnabled Then
+            m_MachiningList(nI).m_bEnabled = False
+            x.bIsActive = False
+         Else
+            m_MachiningList(nI).m_bEnabled = True
+            x.bIsActive = True
+         End If
+         ColorMachining(m_MachiningList(nI))
+         ColorNumberArrow(nI)
+         EgtDraw()
+      End If
+   End Sub
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
       If Not m_bActive OrElse m_bShow Then Return
@@ -595,6 +616,7 @@ Public Class SplitPageUC
          Dim dUsal As Double
          ' ----------------------- REPEAT -----------------------
          Do
+            If Not m_MachiningList(m_nDragInd).m_bCanStartAll Then Exit Do
             dDelta = -dDelta
             ' Leggo il valore salvato nella geometria
             EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
@@ -628,6 +650,7 @@ Public Class SplitPageUC
          Dim dUeal As Double
          dDelta = -dDelta
          Do
+            If Not m_MachiningList(m_nDragInd).m_bCanEndAll Then Exit Do
             dDelta = -dDelta
             ' Leggo il valore salvato nella geometria
             EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
@@ -731,6 +754,24 @@ Public Class SplitPageUC
       EgtDraw()
    End Sub
 
+   Private Sub MachiningLsBx_MouseDoubleClick(sender As Object, e As MouseEventArgs) Handles MachiningLsBx.MouseDoubleClick
+      If m_IsCtrlKeyDown Or m_IsShiftKeyDown Then Return
+      If MachiningLsBx.SelectedItems.Count = 1 Then
+         Dim x As NameIdLsBxItem = DirectCast(MachiningLsBx.SelectedItems(0), NameIdLsBxItem)
+         Dim nI As Integer = x.Ind
+         If m_MachiningList(nI).m_bEnabled Then
+            m_MachiningList(nI).m_bEnabled = False
+            x.bIsActive = False
+         Else
+            m_MachiningList(nI).m_bEnabled = True
+            x.bIsActive = True
+         End If
+         ColorMachining(m_MachiningList(nI))
+         ColorNumberArrow(nI)
+         EgtDraw()
+      End If
+   End Sub
+
    Private Sub MoveUpBtn_Click(sender As Object, e As RoutedEventArgs) Handles MoveUpBtn.Click
       MoveItem(-1)
    End Sub
@@ -914,11 +955,31 @@ Public Class SplitPageUC
       EnableButtons()
    End Sub
 
-   ' ERRORE: questo evento non è eseguito!
-   Private Sub OnKeyDownScene(sender As Object, e As KeyEventArgs)
-      If e.Key = Key.Escape Then
-         ' se sono in fase di creazione di un ponticello interrompo
-         DeselectWJBridgesPart()
+   '' DA FARE: quando seleziono Esc devo togliere deselezionare tutte le enità!
+   'Private Sub OnKeyDownScene(sender As Object, e As KeyEventArgs) Handles Me.KeyDown
+   '   If e.Key = Key.Escape Then
+   '      ' se sono in fase di creazione di un ponticello interrompo
+   '      DeselectWJBridgesPart()
+   '      EgtDeselectAll()
+   '      RemoveMarkAndNumbers()
+   '   End If
+   'End Sub
+
+   Private Sub MachiningLsBx_KeyDown(sender As Object, e As KeyEventArgs) Handles MachiningLsBx.KeyDown
+      If e.Key = Key.LeftCtrl Or e.Key = Key.RightCtrl Then
+         m_IsCtrlKeyDown = True
+      End If
+      If e.Key = Key.LeftShift Or e.Key = Key.RightShift Then
+         m_IsShiftKeyDown = True
+      End If
+   End Sub
+
+   Private Sub MachiningLsBx_KeyUp(sender As Object, e As KeyEventArgs) Handles MachiningLsBx.KeyUp
+      If e.Key = Key.LeftCtrl Or e.Key = Key.RightCtrl Then
+         m_IsCtrlKeyDown = False
+      End If
+      If e.Key = Key.LeftShift Or e.Key = Key.RightShift Then
+         m_IsShiftKeyDown = False
       End If
    End Sub
 
@@ -1125,37 +1186,46 @@ Public Class SplitPageUC
          End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
-            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-            Dim nLiPrev As Integer
-            EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
-            If nLiPrev = MCH_SAW_LI.OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
-            ElseIf nLiPrev = MCH_SAW_LI.CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLiPrev = MCH_SAW_LI.EXT_CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
+
+            ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+            If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+               EgtOutLog(" ⚠️ L'ingresso di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+            Else
+
+               EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+               Dim nLiPrev As Integer
+               EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
+               If nLiPrev = MCH_SAW_LI.OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+               ElseIf nLiPrev = MCH_SAW_LI.CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLiPrev = MCH_SAW_LI.EXT_CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
+               End If
+               ColorMachining(m_MachiningList(nI))
+               ColorNumberArrow(nI)
+               bGenModif = True
+
             End If
-            ColorMachining(m_MachiningList(nI))
-            ColorNumberArrow(nI)
-            bGenModif = True
+
          End If
       Next
       ' Se modificato qualcosa
@@ -1193,24 +1263,33 @@ Public Class SplitPageUC
 
    Private Sub AllCenStartBtn_Click(sender As Object, e As RoutedEventArgs) Handles AllCenStartBtn.Click
       For nI As Integer = 0 To m_MachiningList.Count() - 1
-         EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-         Dim nLiPrev As Integer
-         EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
-         If nLiPrev = MCH_SAW_LI.OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
-            ' ri-verifico interferenza
-            EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-         ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+
+         ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+         If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+            EgtOutLog(" ⚠️ L'ingresso di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+         Else
+
+            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+            Dim nLiPrev As Integer
+            EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
+            If nLiPrev = MCH_SAW_LI.OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+               ' ri-verifico interferenza
+               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+            ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+            End If
+            ColorMachining(m_MachiningList(nI))
+            ColorNumberArrow(nI)
+
          End If
-         ColorMachining(m_MachiningList(nI))
-         ColorNumberArrow(nI)
+
       Next
       EgtDraw()
       ' Imposto flag di modifica
@@ -1226,37 +1305,46 @@ Public Class SplitPageUC
          End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
-            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-            Dim nLoPrev As Integer
-            EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
-            If nLoPrev = MCH_SAW_LO.OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
-            ElseIf nLoPrev = MCH_SAW_LO.CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLoPrev = MCH_SAW_LO.EXT_CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
+
+            ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+            If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+               EgtOutLog(" ⚠️ L'uscita di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+            Else
+
+               EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+               Dim nLoPrev As Integer
+               EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
+               If nLoPrev = MCH_SAW_LO.OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+               ElseIf nLoPrev = MCH_SAW_LO.CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLoPrev = MCH_SAW_LO.EXT_CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
+               End If
+               ColorMachining(m_MachiningList(nI))
+               ColorNumberArrow(nI)
+               bGenModif = True
+
             End If
-            ColorMachining(m_MachiningList(nI))
-            ColorNumberArrow(nI)
-            bGenModif = True
+
          End If
       Next
       ' Se modificato qualcosa
@@ -1294,24 +1382,33 @@ Public Class SplitPageUC
 
    Private Sub AllCenEndBtn_Click(sender As Object, e As RoutedEventArgs) Handles AllCenEndBtn.Click
       For nI As Integer = 0 To m_MachiningList.Count() - 1
-         EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-         Dim nLoPrev As Integer
-         EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
-         If nLoPrev = MCH_SAW_LO.OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
-            ' ri-verifico interferenza
-            EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-         ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+
+         ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+         If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+            EgtOutLog(" ⚠️ L'uscita di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+         Else
+
+            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+            Dim nLoPrev As Integer
+            EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
+            If nLoPrev = MCH_SAW_LO.OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+               ' ri-verifico interferenza
+               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+            ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+            End If
+            ColorMachining(m_MachiningList(nI))
+            ColorNumberArrow(nI)
+
          End If
-         ColorMachining(m_MachiningList(nI))
-         ColorNumberArrow(nI)
+
       Next
       EgtDraw()
       ' Imposto flag di modifica
@@ -1389,6 +1486,12 @@ Public Class SplitPageUC
          ' Se taglio con lama
          If nMachiningType = MCH_MY.SAWING And
             (m_MachiningList(nI).m_bIsLine Or m_MachiningList(nI).m_dPrevAng > FL_ARC_ANG_MIN Or m_MachiningList(nI).m_sLay = NAME_ONPATH) Then
+
+            If Not m_MachiningList(nI).m_bCanStartAll Then
+               EgtOutLog(" ⚠️ Il taglio non puo' essere allungato all'interno del pezzo ⚠️")
+               Return
+            End If
+
             ' leggo il valore salvato nella geometria
             Dim dOrigUsal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
@@ -1564,6 +1667,11 @@ Public Class SplitPageUC
          If nMachiningType = MCH_MY.SAWING And
             (m_MachiningList(nI).m_bIsLine Or m_MachiningList(nI).m_dNextAng > FL_ARC_ANG_MIN Or m_MachiningList(nI).m_sLay = NAME_ONPATH) Then
 
+            If Not m_MachiningList(nI).m_bCanEndAll Then
+               EgtOutLog(" ⚠️ Il taglio non puo' essere allungato all'interno del pezzo ⚠️")
+               Return
+            End If
+
             Dim dOrigUeal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
 

Constants/ConstGen.vb

@@ -223,6 +223,8 @@ Module ConstGen
    Public Const INFO_DEPTH2 As String = "Depth2"
    Public Const INFO_AGG2 As String = "Agg2"
    Public Const INFO_ROUNDOFF As String = "RoundOff"
+   Public Const INFO_DIRECTCUT As String = "DirectCut"
+   Public Const INFO_STEP_TYPE As String = "StepType"
    ' Info in entità da tagliare per taglio ristretto
    Public Const INFO_STRICT As String = "Strict"
    ' Info in entità da tagliare per angolo di lato e tallone

Constants/ConstIni.vb

@@ -335,6 +335,7 @@ Module ConstIni
    Public Const K_DC_FLATT_HEADSIDE As String = "FlattHeadSide"
    Public Const K_DC_FLATT_MACHTYPE As String = "FlattMachType"
    Public Const K_DC_FLATT_ROTLOCK As String = "FlattRotLock"
+   Public Const K_DC_FLAT_CHAINEDPATH As String = "ChainedPath"
    Public Const K_DC_FLATT_POSX As String = "FlattPosX"
    Public Const K_DC_FLATT_POSY As String = "FlattPosY"
    Public Const K_DC_POLISH_NAME As String = "PolishName"

Constants/ConstMachIni.vb

@@ -230,6 +230,7 @@
    Public Const K_MACH_MILLING_ON_SINKS As String = "MillingOnSinks"
    Public Const K_MACH_MILLING_SHORTENING As String = "MillingShortening"
    Public Const K_MACH_ENGRAVING_WITHMILL As String = "EngravingWithMill"
+   Public Const K_MACH_STARTCENERTOOLPATH As String = "StartCenterToolPath"
    Public Const K_MACH_ENGRAVING_DEPTH As String = "EngravingDepth"
    Public Const K_MACH_ENGRAVING_WIDTH As String = "EngravingWidth"
    Public Const K_MACH_NEST_ALIGNED As String = "Aligned"

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -23,6 +23,9 @@ Public Class ControlsMachineButtonUC
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
 
+   ' visualizzo l'elenco degli elementi della pagina sono al primo avvio
+   Friend Shared m_OutLogTypeButton As Boolean = True
+
    ' Creazione converter da String a ImageSource
    Dim ImageConverter As New ImageSourceConverter
 
@@ -76,6 +79,7 @@ Public Class ControlsMachineButtonUC
          For Each MachineButton As MachineButton In m_ButtonList
             GetTypeButton(MachineButton)
          Next
+         m_OutLogTypeButton = False
 
          NotifyPropertyChanged("ButtonList")
       End If
@@ -87,6 +91,7 @@ Public Class ControlsMachineButtonUC
    '-------------------------------------------------------------------------------
 
    Friend Sub GetTypeButton(CurrMachineButton As MachineButton)
+      If Not m_OutLogTypeButton Then Return
       Dim BtnType As Type = CurrMachineButton.GetType
       If BtnType Is GetType(NoStateButton) Then
          EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(0) ") & " , " & CurrMachineButton.StateFlag)

DirectCuts/FlatteningCut.xaml

@@ -7,142 +7,185 @@
    mc:Ignorable="d" 
    d:DesignHeight="597.3" d:DesignWidth="256">
 
-   <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
-   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
+    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
+    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
 
-      <!-- Definizione della Grid FlatteningCut -->
-      <Grid Name="FlatteningCutGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="2*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/> 
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
+            <!-- Definizione della Grid FlatteningCut -->
+            <Grid Name="FlatteningCutGrid" >
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="2*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
 
-         <Grid Grid.Row="0" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+                <Grid Grid.Row="0" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
 
-                <ToggleButton Name="Point1Btn" Grid.Column="0"
+                    <ToggleButton Name="Point1Btn" Grid.Column="0"
                Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
+                        <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </ToggleButton>
 
-                <ToggleButton Name="Point2Btn" Grid.Column="1"
+                    <ToggleButton Name="Point2Btn" Grid.Column="1"
                Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
+                        <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </ToggleButton>
 
-            </Grid>
+                </Grid>
 
-         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
 
-         <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
+            <ScrollViewer VerticalScrollBarVisibility="Visible" Visibility="Visible"
+                          Grid.Row="1" Grid.RowSpan="11" Grid.ColumnSpan="2">
+
+                <Grid Name="DatiTaglioGrid" >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.1"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="0.1"/>
+                    </Grid.RowDefinitions>
+
+                    <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
+                <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
+                <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"
+                <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="WidthTxBl" Grid.Column="0" Grid.Row="5"
+                <TextBlock Name="WidthTxBl" Grid.Column="0" Grid.Row="5"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="OverlapTxBl" Grid.Column="0" Grid.Row="6"
+                <TextBlock Name="OverlapTxBl" Grid.Column="0" Grid.Row="6"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OverlapTxBx" Grid.Column="1" Grid.Row="6" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="OverlapTxBx" Grid.Column="1" Grid.Row="6" Margin="0,0,6,0"
             Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-            <TextBlock Name="ZReleasedTxBl" Grid.Column="0" Grid.Row="7"
+                <TextBlock Name="ZReleasedTxBl" Grid.Column="0" Grid.Row="7"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="ZReleasedTxBx" Grid.Column="1" Grid.Row="7" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>          
+                <EgtWPFLib:EgtTextBox Name="ZReleasedTxBx" Grid.Column="1" Grid.Row="7" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>
 
-         <TextBlock Name="SideTxBl" Grid.Row="8" Grid.ColumnSpan="2"
+                <TextBlock Name="SideTxBl" Grid.Row="8" Grid.ColumnSpan="2"
              Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="SideChBx" Grid.Row="8" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                <CheckBox Name="SideChBx" Grid.Row="8" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
              HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
-         <ComboBox Name="TypeCmBx" Grid.Row="9" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+                <ComboBox Name="TypeCmBx" Grid.Row="9" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
 
-         <TextBlock Name="RotLockTxBl" Grid.Row="10" Grid.ColumnSpan="2"
+                <TextBlock Name="RotLockTxBl" Grid.Row="10" Grid.ColumnSpan="2"
              Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="RotLockChBx" Grid.Row="10" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                <CheckBox Name="RotLockChBx" Grid.Row="10" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
              HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
-         <Grid Grid.Row="11" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-            <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-         </Grid>
+                    <TextBlock Name="ChainedPathTxBl" Grid.Row="11" Grid.ColumnSpan="2"
+             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    <CheckBox Name="ChainedPathChBx" Grid.Row="11" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Right" Margin="0,0,6,0"/>
 
-         <Grid Grid.Row="12" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+                    <ComboBox Name="SelToolCmBx" Grid.Row="12" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                        <ComboBox.ItemTemplate>
+                            <DataTemplate>
+                                <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                            </DataTemplate>
+                        </ComboBox.ItemTemplate>
+                    </ComboBox>
+
+                    <Grid Grid.Row="13" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="0.5*"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="0.5*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                    <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                    <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                    <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                </Grid>
+
+                </Grid>    
+            </ScrollViewer>
+
+            <Grid Grid.Row="12" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+
+                    <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                    <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                    <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                </Grid>
 
-                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
             </Grid>
-
-      </Grid>
-
-   </Border>
+        
+    </Border>
 
 </UserControl>

DirectCuts/FlatteningCut.xaml.vb

@@ -1,4 +1,6 @@
-Imports EgtUILib
+Imports System.Reflection
+Imports EgtUILib
+Imports EgtUILib.EgtInterface
 
 Public Class FlatteningCut
 
@@ -35,14 +37,18 @@ Public Class FlatteningCut
    Private m_bHeadSide As Boolean = False
    Private m_nMachType As Integer = 1
    Private m_bRotLock As Boolean = False
+   Private m_bChainedPath As Boolean = True
+   Private m_nTool As Integer = 0
    ' Array delle modalità di acquisizione dei punti
    Private m_PointsModeArray(2) As String
    ' Array delle tipologia di lavorazione della spianatura
-   Private m_TypeArray(1) As String
+   Private m_TypeArray(2) As String
    ' Punto selezionato nel disegno
    Private m_ptPrev As Point3d
    ' Layer per crocette temporanee
    Private m_nTempLay As Integer = GDB_ID.NULL
+   ' Array degliutensili disponibili (lama e fresa)
+   Private m_ToolsArray(1) As String
 
    ' Costanti
    Private Const MAX_TAB_DEPTH As Double = 10.0
@@ -57,8 +63,9 @@ Public Class FlatteningCut
    End Enum
    ' Costanti che indicano la tipologia di lavorazione della spianatura
    Private Enum MACH_TYPE As Integer
-      ONEWAY = 0
-      ZIGZAG = 1
+      ZIGZAG = 0
+      ONEWAY = 1
+      SPIRAL = 2
    End Enum
    'Costante che indica il lato in cui posizionare i tagli
    Private Enum CutSide As Integer
@@ -66,6 +73,11 @@ Public Class FlatteningCut
       Right
    End Enum
 
+   Private Enum TOOL As Integer
+      SAW = 0
+      MILL = 1
+   End Enum
+
    ' Per abilitare la spianatura con la FRESA deve essere imposatato a TRUE il flag "Usa Fresa" nella pagina MACCHINA (campo INCISIONI)
    Private Sub FlatteningCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Creo lista modalità di acquisizione punto 
@@ -75,8 +87,9 @@ Public Class FlatteningCut
       ' la associo alla combobox
       PointModeCmBx.ItemsSource = m_PointsModeArray
       ' Creo lista tipo lavorazione
-      m_TypeArray(MACH_TYPE.ONEWAY) = EgtMsg(MSG_COMBOBOXPARAM + 39)
       m_TypeArray(MACH_TYPE.ZIGZAG) = EgtMsg(MSG_COMBOBOXPARAM + 38)
+      m_TypeArray(MACH_TYPE.ONEWAY) = EgtMsg(MSG_COMBOBOXPARAM + 39)
+      m_TypeArray(MACH_TYPE.SPIRAL) = EgtMsg(MSG_COMBOBOXPARAM + 51)
       ' la associo alla combobox
       TypeCmBx.ItemsSource = m_TypeArray
       ' assegno messaggi
@@ -90,19 +103,26 @@ Public Class FlatteningCut
       ZReleasedTxBl.Text = "Z Svincolo"
       SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
       RotLockTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 29)
+      ChainedPathTxBl.Text = "Chained path"
       SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
       OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      ' tipo di utensile in uso per la lavorazione
+      m_ToolsArray(TOOL.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
+      m_ToolsArray(TOOL.MILL) = "Mill"
+      SelToolCmBx.ItemsSource = m_ToolsArray
       ' Carico i dati dell'ultimo taglio
-      m_dDepth = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
-      m_dAngO = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
-      m_dLen = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_LENGTH, m_dLen, m_MainWindow.GetIniFile())
-      m_dWid = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_WIDTH, m_dWid, m_MainWindow.GetIniFile())
+      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
+      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
+      m_dLen = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_LENGTH, m_dLen, m_MainWindow.GetIniFile())
+      m_dWid = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_WIDTH, m_dWid, m_MainWindow.GetIniFile())
       m_dOverlap = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_OVERLAP, m_dOverlap, m_MainWindow.GetIniFile())
       m_dZReleased = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, m_dZReleased, m_MainWindow.GetIniFile())
       m_bHeadSide = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_nMachType = GetPrivateProfileInt( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType, m_MainWindow.GetIniFile())
-      m_bRotLock = ( GetPrivateProfileInt( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, 0, m_MainWindow.GetIniFile()) <> 0)
-      m_ptTipP1.x = GetPrivateProfileDouble( S_DIRECTCUTS, K_DC_FLATT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
+      m_nMachType = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType, m_MainWindow.GetIniFile())
+      m_bRotLock = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_bChainedPath = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLAT_CHAINEDPATH, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_nTool = GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile())
+      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
       m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
    End Sub
 
@@ -125,16 +145,16 @@ Public Class FlatteningCut
       ' Disabilito registrazione progetto modificato
       EgtDisableModified()
       ' Creo layer temporaneo per crocette
-      m_nTempLay = EgtCreateGroup( GDB_ID.ROOT)
-      EgtSetLevel( m_nTempLay, GDB_LV.TEMP)
+      m_nTempLay = EgtCreateGroup(GDB_ID.ROOT)
+      EgtSetLevel(m_nTempLay, GDB_LV.TEMP)
       ' Origine tavola
       m_bRawOk = True
-      If Not EgtGetTableRef( 1, m_ptTabOri) Then
+      If Not EgtGetTableRef(1, m_ptTabOri) Then
          m_bRawOk = False
          EgtOutLog("Error on TableRef1")
       End If
       ' Dati del grezzo
-      If Not GetRawBox( m_ptRawMin, m_ptRawMax) Then
+      If Not GetRawBox(m_ptRawMin, m_ptRawMax) Then
          m_bRawOk = False
          EgtOutLog("Error on RawBox")
       End If
@@ -142,7 +162,7 @@ Public Class FlatteningCut
       m_bPointP1Ok = False
       m_bPointP2Ok = False
       ' Inizializzo primo punto acquisito dal disegno
-      m_ptPrev = m_ptTipP1 + ( m_ptTabOri - Point3d.ORIG())
+      m_ptPrev = m_ptTipP1 + (m_ptTabOri - Point3d.ORIG())
       m_ptPrev.z = m_ptRawMax.z
       ' Disegno crocetta che indica il punto acquisito
       CreateCross(m_nTempLay, m_ptPrev)
@@ -151,10 +171,10 @@ Public Class FlatteningCut
       SetCoordVisibility(True)
       ShowCoord()
       ' Assegno parametri di lavorazione già definiti
-      DepthTxBx.Text = LenToString( m_dDepth, 1)
-      DirectionTxBx.Text = DoubleToString( m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
-      LenghtTxBx.Text = LenToString( m_dLen, 1)
-      WidthTxBx.Text = LenToString( m_dWid, 2)
+      DepthTxBx.Text = LenToString(m_dDepth, 1)
+      DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
+      LenghtTxBx.Text = LenToString(m_dLen, 1)
+      WidthTxBx.Text = LenToString(m_dWid, 2)
       OverlapTxBx.Text = LenToString(m_dOverlap, 2)
       ZReleasedTxBx.Text = LenToString(m_dZReleased, 2)
       ' carico la quota di svincolo per la spianatura
@@ -163,6 +183,9 @@ Public Class FlatteningCut
       SideChBx.IsChecked = m_bHeadSide
       TypeCmBx.SelectedIndex = m_nMachType
       RotLockChBx.IsChecked = m_bRotLock
+      ChainedPathChBx.IsChecked = m_bChainedPath
+      ' Assegno l'utensile in definito in macchina per la fresatura
+      SelToolCmBx.SelectedIndex = m_nTool
       ' Reset taglio e disabilito bottone esecuzione
       m_bCutOk = False
       UpdateSimulOkBtn()
@@ -176,16 +199,16 @@ Public Class FlatteningCut
 
    Friend Sub FlatteningCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ANGH, DoubleToString( m_dAngO, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_LENGTH, DoubleToString( m_dLen, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_WIDTH, DoubleToString( m_dWid, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_OVERLAP, DoubleToString(m_dOverlap, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, DoubleToString(m_dZReleased, 2), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, If( m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If( m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
-      WritePrivateProfileString( S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString( m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_DEPTH, DoubleToString(m_dDepth, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_ANGH, DoubleToString(m_dAngO, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_LENGTH, DoubleToString(m_dLen, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_WIDTH, DoubleToString(m_dWid, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_OVERLAP, DoubleToString(m_dOverlap, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_Z_RELEASED, DoubleToString(m_dZReleased, 2), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, If(m_bHeadSide, "1", "0"), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType.ToString(), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, If(m_bRotLock, "1", "0"), m_MainWindow.GetIniFile())
+      WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSX, DoubleToString(m_ptTipP1.x, 2), m_MainWindow.GetIniFile())
       WritePrivateProfileString(S_DIRECTCUTS, K_DC_FLATT_POSY, DoubleToString(m_ptTipP1.y, 2), m_MainWindow.GetIniFile())
       ' Se non vado in simulazione
       If Not m_bSimul Then
@@ -296,7 +319,7 @@ Public Class FlatteningCut
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP1) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Altrimenti da lama
          Else
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
@@ -314,7 +337,7 @@ Public Class FlatteningCut
          m_dAngO = dTAngO + 90
          DirectionTxBx.Text = DoubleToString(m_dAngO - m_MainWindow.m_CurrentMachine.dDeltaC, 2)
 
-      ' Altrimenti da disegno
+         ' Altrimenti da disegno
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP1
          m_ptTipP1 = m_ptPrev
@@ -378,7 +401,7 @@ Public Class FlatteningCut
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, vAng, True, m_ptTipP2) Then Return
             ' Ora imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Altrimenti da lama
          Else
             ' Imposto la lama corrente
             If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
@@ -391,7 +414,7 @@ Public Class FlatteningCut
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
 
-      ' Altrimenti da disegno
+         ' Altrimenti da disegno
       Else
          ' Assegno punto selezionato nel disegno a m_ptTipP2
          m_ptTipP2 = m_ptPrev
@@ -546,6 +569,16 @@ Public Class FlatteningCut
       EgtDraw()
    End Sub
 
+   Private Sub SelToolCmBx_SelectionChanged(sender As Object, e As EventArgs) Handles SelToolCmBx.SelectionChanged
+      m_nTool = SelToolCmBx.SelectedIndex
+      ' Disabilito il concatenamento
+      ChainedPathChBx.IsEnabled = (m_nTool = TOOL.MILL)
+      ' Disegno il taglio
+      CreateFlatteningCut()
+      SetMachineInCurrPos()
+      EgtDraw()
+   End Sub
+
    Private Sub RotLockChBx_Click(sender As Object, e As EventArgs) Handles RotLockChBx.Click
       m_bRotLock = RotLockChBx.IsChecked
       ' Disegno il taglio
@@ -554,6 +587,14 @@ Public Class FlatteningCut
       EgtDraw()
    End Sub
 
+   Private Sub ChainedPathChBx_Click(sender As Object, e As EventArgs) Handles ChainedPathChBx.Click
+      m_bChainedPath = ChainedPathChBx.IsChecked
+      ' Disegno il taglio
+      CreateFlatteningCut()
+      SetMachineInCurrPos()
+      EgtDraw()
+   End Sub
+
    Private Sub XcoordTxBx_EgtClosed(sender As Object, e As EventArgs) Handles XcoordTxBx.EgtClosed
       ' Recupero il valore della coordinata (in 0 Tab)
       Dim dXcoord As Double = 0
@@ -605,9 +646,9 @@ Public Class FlatteningCut
       m_CurrProjPage.SetWarningMessage("Trial Version")
 #Else
       ' Verifico non sia versione Ufficio
-      If m_MainWindow.GetKeyOption( MainWindow.KEY_OPT.OFFICE_TYPE) Then
-          m_CurrProjPage.SetWarningMessage( "Office Version")
-          Return
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         m_CurrProjPage.SetWarningMessage("Office Version")
+         Return
       End If
       ' Verifico ci sia un taglio valido
       If Not m_bCutOk Then Return
@@ -644,10 +685,12 @@ Public Class FlatteningCut
    ' ricavo l'ingombro di lavorazione in funzione dell'utensile selezionato
    Private Function GetFootPrintTool() As Double
       ' vedere nella pagina Allarm il capito "Incisioni"
-      Dim bForceUseMill As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0)
+      Dim bForceUseMill As Boolean = (m_nTool = TOOL.MILL)
       Dim dFootPrint As Double = 0
       ' verifico quale lavorazione è attiva
       If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) AndAlso Not bForceUseMill Then
+         Dim bSetTool As Boolean = EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw)
+         If Not bSetTool Then EgtOutLog("Erro nel settaggio utensile lama " & m_MainWindow.m_CurrentMachine.sCurrSaw)
          EgtTdbGetCurrToolParam(MCH_TP.THICK, dFootPrint)
       ElseIf Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrMilling) Then
          Dim sCurrMill = m_MainWindow.m_CurrentMachine.sCurrMill
@@ -682,18 +725,24 @@ Public Class FlatteningCut
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0
       Dim nCutId = EgtCreateLinePDL(nLayerId, ptStart, m_dAngO, m_dLen)
+      EgtSetInfo(nCutId, INFO_DIRECTCUT, 1)
       ' Imposto affondamento e angolo di fianco sul taglio
       EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
-      If (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0) Then
+      If (m_nTool = TOOL.MILL) Then
          EgtSetInfo(nCutId, INFO_WIDTH, GetFootPrintTool)
       End If
       EgtSetInfo(nCutId, INFO_SIDE_ANGLE, 0)
       ' Imposto prima direzione
       EgtSetInfo(nCutId, INFO_DIR, 1)
+      ' Imposto se iniziare la fresatura dal punto indicato
+      Dim bReducePath As Boolean = Not GetPrivateProfileInt(S_MACH_NEST, K_MACH_STARTCENERTOOLPATH, 0, m_MainWindow.GetMachIniFile()) <> 0
+      If Not bReducePath Then EgtSetInfo(nCutId, INFO_STRICT, 0)
+
       ' Eventuale bloccaggio rotazione asse C tra le passate
       If RotLockChBx.IsChecked Then
          EgtSetInfo(nCutId, INFO_ENABLE_INVERT, False)
       End If
+      EgtSetInfo(nCutId, INFO_STEP_TYPE, m_nMachType)
       ' Funzione che crea i tagli successivi al primo
       MultiplyCut(nLayerId, nCutId)
       ' Creo layer per crocetta di riferimento
@@ -726,10 +775,17 @@ Public Class FlatteningCut
    End Function
 
    Private Function MultiplyCut(nLayerId As Integer, nCutId As Integer) As Boolean
+      Dim bEngWithMill As Boolean = (m_nTool = TOOL.MILL)
+      Dim bReducePath As Boolean = Not GetPrivateProfileInt(S_MACH_NEST, K_MACH_STARTCENERTOOLPATH, 0, m_MainWindow.GetMachIniFile()) <> 0
+
       ' Recupero spessore della lama (utensile) correntemente attiva
       Dim dThick As Double = GetFootPrintTool()
       If dThick = 0 Then Return False
 
+      ' Salvo la prima curva nella lista dei percorsi da concatenare
+      Dim CutsList As New List(Of Integer)
+      CutsList.Add(nCutId)
+
       ' Imposto angolo di rotazione a seconda del lato dei tagli
       Dim dRotAngO As Double = If(SideChBx.IsChecked(), -90, 90)
       ' Definisco vettore di spostamento
@@ -747,7 +803,10 @@ Public Class FlatteningCut
       If nStepNum > 1 Then
          dDelta = dWidth / (nStepNum - 1)
       End If
+      ' definisco la larghezza dell'utensile (solo per la fresa)
       EgtSetInfo(nCutId, INFO_WIDTH, dThick)
+      ' definisco il tipo di utensile da utilizzare
+      EgtSetInfo(nCutId, "EngravingWithMill", m_nTool)
       ' Creo vettore delta
       vtDelta *= dDelta
       ' Creo indice per impostare info che indica tipologia di spianatura
@@ -757,6 +816,7 @@ Public Class FlatteningCut
          ' Creo copie
          Dim nCut2Id = EgtCopyGlob(nCutId, nLayerId)
          EgtSetInfo(nCut2Id, INFO_WIDTH, dThick)
+         EgtSetInfo(nCutId, "EngravingWithMill", m_nTool)
          ' Assegno info direzione a seconda del tipo di spianatura
          If TypeCmBx.SelectedIndex = MACH_TYPE.ZIGZAG Then
             If nTypeIndex = 1 Then
@@ -770,10 +830,77 @@ Public Class FlatteningCut
             EgtSetInfo(nCut2Id, INFO_DIR, 1)
          End If
          EgtMove(nCut2Id, vtPerpMove, GDB_RT.GLOB)
+
+         ' ----------------------- CREO SEGMENTI PER CONCATENAMENTO CURVE -----------------------
+         If m_bChainedPath And bEngWithMill Then
+            If bReducePath Then
+               If Index < nStepNum - 1 Then
+                  ExtendLenghtMillPath(nCut2Id, -dThick / 2)
+               ElseIf Index = nStepNum - 1 Then
+                  If nStepNum Mod 2 = 0 Then
+                     ExtendLenghtMillPath(nCut2Id, -dThick / 2, False, True)
+                  Else
+                     ExtendLenghtMillPath(nCut2Id, -dThick / 2, True, False)
+                  End If
+               End If
+            End If
+               CutsList.Add(nCut2Id)
+            End If
+         ' ----------------------- CREO SEGMENTI PER CONCATENAMENTO CURVE -----------------------
+
       Next
+
+      ' ----------------------- CREO UN UNICO PERCORSO CONCATENATO -----------------------
+      If m_bChainedPath And bEngWithMill Then
+         ' Decidere se accorciare i tagli del valore del raggio utensile!
+         If bReducePath Then
+            ExtendLenghtMillPath(CutsList(0), -dThick / 2, False, True)
+         End If
+         For Index As Integer = 0 To CutsList.Count - 2
+            If Index Mod 2 <> 0 Then
+               ' Costruisco la linea di collegamento tra due curve adiacenti
+               Dim PtStart_1 As Point3d
+               EgtStartPoint(CutsList(Index), GDB_RT.GLOB, PtStart_1)
+               Dim PtStart_2 As Point3d
+               EgtStartPoint(CutsList(Index + 1), GDB_RT.GLOB, PtStart_2)
+               CutsList.Add(EgtCreateLine(nLayerId, PtStart_1, PtStart_2))
+            Else
+               ' Costruisco la linea di collegamento tra due curve adiacenti
+               Dim PtStart_1 As Point3d
+               EgtEndPoint(CutsList(Index), GDB_RT.GLOB, PtStart_1)
+               Dim PtStart_2 As Point3d
+               EgtEndPoint(CutsList(Index + 1), GDB_RT.GLOB, PtStart_2)
+               CutsList.Add(EgtCreateLine(nLayerId, PtStart_1, PtStart_2))
+            End If
+         Next
+         Dim ptNear As Point3d
+         EgtStartPoint(CutsList(0), ptNear)
+         Dim IdJointCurv As Integer = EgtCreateCurveCompoByChain(nLayerId, CutsList.ToArray, ptNear, True)
+         EgtSetInfo(IdJointCurv, INFO_DIRECTCUT, 1)
+         EgtSetInfo(IdJointCurv, INFO_STEP_TYPE, m_nMachType)
+         EgtSetInfo(IdJointCurv, INFO_WIDTH, dThick)
+         ' Se unisco il percorso devo per forza usare la fresa!
+         EgtSetInfo(IdJointCurv, "EngravingWithMill", 1)
+         If Not bReducePath Then EgtSetInfo(IdJointCurv, INFO_STRICT, 0)
+      End If
+      ' ----------------------- CREO UN UNICO PERCORSO CONCATENATO -----------------------
+
       Return True
    End Function
 
+   Private Sub ExtendLenghtMillPath(ByVal IdCurv As Integer, ByVal ReduceVal As Double,
+                                    ByVal Optional bStart As Boolean = True, ByVal Optional bEnd As Boolean = True)
+      Dim PtStart As Point3d
+      EgtStartPoint(IdCurv, GDB_RT.GLOB, PtStart)
+      Dim PtEnd As Point3d
+      EgtEndPoint(IdCurv, GDB_RT.GLOB, PtEnd)
+      If bStart Then EgtTrimExtendCurveByLen(IdCurv, ReduceVal, PtStart, GDB_RT.GLOB)
+      If bEnd Then EgtTrimExtendCurveByLen(IdCurv, ReduceVal, PtEnd, GDB_RT.GLOB)
+      Dim dLenLine As Double
+      EgtCurveLength(IdCurv, dLenLine)
+      EgtOutLog("Lunghezza segmento ridotto: " & dLenLine.ToString)
+   End Sub
+
    Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
       ' Aggiungo crocette
       Dim vtCrossX As New Vector3d(20, 0, 0)

DirectCuts/SingleDrillUC.xaml.vb

@@ -72,7 +72,10 @@ Public Class SingleDrillUC
    Private Sub SingleDrill_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       m_sCurrDrill = m_CurrentMachine.sCurrDrill
       GetDrillFromDrilling(m_sCurrDrill, m_CurrentMachine.sCurrDrilling)
-
+      ' rimuovo utensile su uscite 1
+      EgtSetCalcTool("", "H1", 1)
+      ' imposto utensile su uscita 2
+      EgtSetCalcTool(m_sCurrDrill, "H1", 2)
       ' recupero informazioni del foretto usato
       EgtTdbSetCurrTool(m_sCurrDrill)
       EgtTdbGetCurrToolParam(MCH_TP.DIAM, m_dDiameter)
@@ -263,7 +266,7 @@ Public Class SingleDrillUC
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
          ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sDrill, "H1", 1) Then Return
+         If Not EgtSetCalcTool(sDrill, "H1", 2) Then Return
       End If
 
       ' Disegno il taglio
@@ -443,9 +446,9 @@ Public Class SingleDrillUC
       ptIns.z = dRawHeight
       ' Inserisco il pezzo nel grezzo
       EgtAddPartToRawPart(nPartId, ptIns, m_MainWindow.m_CurrentProjectPageUC.m_nRawId)
+      EgtSetCurrPhase(1)
       ' Inserisco la lavorazione
       m_bCutOk = AddMachinings(nPartId) AndAlso UpdateAllMachiningsToolpaths()
-      EgtSetCurrPhase(1)
       ' Eventuale eliminazione Home finale
       If Not m_MainWindow.m_CurrentMachine.bDirectCutsFinalHome Then
          RemoveFinalHome()

DirectCuts/VacuumMachineButtonUC.xaml.vb

@@ -22,6 +22,9 @@ Public Class VacuumMachineButtonUC
    Friend m_CN As CN_generico
    Private m_bFirst As Boolean = True
 
+   ' visualizzo l'elenco degli elementi della pagina sono al primo avvio
+   Friend m_OutLogTypeButton As Boolean = True
+
    ' Creazione converter da String a ImageSource
    Dim ImageConverter As New ImageSourceConverter
 
@@ -73,8 +76,9 @@ Public Class VacuumMachineButtonUC
          End While
 
          For Each MachineButton As MachineButton In m_ButtonList
-            GetTypeButton(MachineButton)
+            OutLogTypeButton(MachineButton)
          Next
+         m_OutLogTypeButton = False
 
          NotifyPropertyChanged("ButtonList")
       End If
@@ -85,7 +89,8 @@ Public Class VacuumMachineButtonUC
    ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
    '-------------------------------------------------------------------------------
 
-   Friend Sub GetTypeButton(CurrMachineButton As MachineButton)
+   Friend Sub OutLogTypeButton(CurrMachineButton As MachineButton)
+      If Not m_OutLogTypeButton Then Return
       Dim BtnType As Type = CurrMachineButton.GetType
       If BtnType Is GetType(NoStateButton) Then
          EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(0) ") & " , " & CurrMachineButton.StateFlag)

DrawImport/ImportPageUC.xaml

@@ -7,55 +7,57 @@
    mc:Ignorable="d" 
    d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="ImportPage_Initialized" Loaded="ImportPage_Loaded" Unloaded="ImportPage_Unloaded">
 
-   <!-- Definizione della ImportPage -->
-   <Border>
-      <Grid Name="ImportPageGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="3*"/>
-            <ColumnDefinition Width="12*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="8*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
-
-         
-         <!-- Definizione della Grid superiore per Button -->
-         <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
+    <!-- Definizione della ImportPage -->
+    <Border>
+        <Grid Name="ImportPageGrid" >
             <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="7*"/>
+                <ColumnDefinition Width="3*"/>
+                <ColumnDefinition Width="12*"/>
             </Grid.ColumnDefinitions>
-
-            <ToggleButton Name="SideAngleBtn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="FiloTopBtn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="DripCutBtn" Grid.Column="2" Padding="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="DripDrillBtn" Grid.Column="3" Padding="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <Button Name="Cad2dBtn" Grid.Column="4" Padding="0"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-         </Grid>
-
-         <!-- Definizione della Grid laterale -->
-         <Grid Name="LeftGrid" Grid.RowSpan="3">
             <Grid.RowDefinitions>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="7.25*"/>
-               <RowDefinition Height="0.75*"/>
-               <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="8*"/>
+                <RowDefinition Height="1*"/>
             </Grid.RowDefinitions>
 
-            <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
+
+            <!-- Definizione della Grid superiore per Button -->
+            <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="7*"/>
+                </Grid.ColumnDefinitions>
+
+                <ToggleButton Name="SideAngleBtn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="FiloTopBtn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="DripCutBtn" Grid.Column="2" Padding="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="EngraveBtn" Grid.Column="2"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="DripDrillBtn" Grid.Column="3" Padding="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <Button Name="Cad2dBtn" Grid.Column="4" Padding="0"
+               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            </Grid>
+
+            <!-- Definizione della Grid laterale -->
+            <Grid Name="LeftGrid" Grid.RowSpan="3">
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="7.25*"/>
+                    <RowDefinition Height="0.75*"/>
+                    <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
+
+                <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
                      ItemsSource="{Binding ItemList}"/>
 
                 <Grid Name="FinderGrd"  Grid.Row="3" Margin="0,0,8,0">
@@ -68,68 +70,68 @@
                     <Button Name="ClearFindBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Margin="0,6,2,6">
                         <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}" Width="30" />
                     </Button>
-                </Grid> 
-            
-            <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
-               <TextBlock Name="MessageTxBx" TextAlignment="Center"
+                </Grid>
+
+                <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
+                    <TextBlock Name="MessageTxBx" TextAlignment="Center"
                    Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            </Border>
+                </Border>
 
-         </Grid>
-
-         <!-- Definizione della Grid inferiore per Button -->
-         <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-
-            <Button Name="UseLayerBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="UseClosedCurveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="UseRegionBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="ResetBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-            <RadioButton Name="mmBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
-            <RadioButton Name="inchBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-
-            <Button Name="OrderListBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-            <ToggleButton Name="TopBtn" Grid.Column="7" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
-
-            <Grid Name="PartNumberGrd" Grid.Column="8" Grid.ColumnSpan="2">
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
-
-               <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
-                  TextAlignment="Right"/>
-               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
-                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
             </Grid>
 
-            <Button Name="OkBtn" Grid.Column="10" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
+            <!-- Definizione della Grid inferiore per Button -->
+            <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="UseLayerBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="UseClosedCurveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="UseRegionBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="ResetBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+                <RadioButton Name="mmBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
+                <RadioButton Name="inchBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+
+                <Button Name="OrderListBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+                <ToggleButton Name="TopBtn" Grid.Column="7" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
+
+                <Grid Name="PartNumberGrd" Grid.Column="8" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+
+                    <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
+                  TextAlignment="Right"/>
+                    <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
+                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                </Grid>
+
+                <Button Name="OkBtn" Grid.Column="10" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+                <Button Name="ExitBtn" Grid.Column="11" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
 
-            <Button Name="ExitBtn" Grid.Column="11" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-            
-         </Grid>
-         
-      </Grid>
-      
-   </Border>
-   
 </UserControl>

DrawImport/ImportPageUC.xaml.vb

@@ -88,6 +88,7 @@ Public Class ImportPageUC
       SideAngleBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 7)             'Inclina lati
       FiloTopBtn.Content = EgtMsg( 90400)                             'Filo Top
       DripCutBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 8)               'Incidi da sotto
+      EngraveBtn.Content = "Engrave"
       DripDrillBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 14)            'Foro da sotto
       Cad2dBtn.Content = "Cad 2d"
 
@@ -163,6 +164,10 @@ Public Class ImportPageUC
 
       ' Pulisco tutto
       ClearView()
+      ' Definizione di quale comando deve essere visualizzato
+      DripCutBtn.Visibility = If(String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw), Visibility.Hidden, Visibility.Visible)
+      EngraveBtn.Visibility = If(DripCutBtn.Visibility <> Visibility.Visible, Visibility.Visible, Visibility.Hidden)
+
       FileListBox.UnselectAll()
       ' inibisco selezione diretta da Scene
       ImportScene.SetStatusNull()
@@ -343,7 +348,12 @@ Public Class ImportPageUC
       ResetBtn.IsEnabled = False
       SideAngleBtn.IsEnabled = False
       FiloTopBtn.IsEnabled = False
-      DripCutBtn.IsEnabled = False
+      ' Evito di settare le proprietà di oggeti che sono con visibilità Hidden
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = False
+      Else
+         EngraveBtn.IsEnabled = False
+      End If
       DripDrillBtn.IsEnabled = False
       Return True
    End Function
@@ -404,7 +414,11 @@ Public Class ImportPageUC
             OkBtn.IsEnabled = False
             SideAngleBtn.IsEnabled = False
             FiloTopBtn.IsEnabled = False
-            DripCutBtn.IsEnabled = False
+            If DripCutBtn.Visibility = Visibility.Visible Then
+               DripCutBtn.IsEnabled = False
+            Else
+               EngraveBtn.IsEnabled = False
+            End If
             DripDrillBtn.IsEnabled = False
          ElseIf m_nFileType = FT_TRF Or m_nFileType = FT_CUT Then
             ' abilito bottone Insert, disabilito bottoni UseLayer, UseClosedCurve, UseRegion e Reset
@@ -420,7 +434,11 @@ Public Class ImportPageUC
             OkBtn.IsEnabled = True
             SideAngleBtn.IsEnabled = False
             FiloTopBtn.IsEnabled = False
-            DripCutBtn.IsEnabled = False
+            If DripCutBtn.Visibility = Visibility.Visible Then
+               DripCutBtn.IsEnabled = False
+            Else
+               EngraveBtn.IsEnabled = False
+            End If
             DripDrillBtn.IsEnabled = False
          End If
          ' altrimenti import per cornici
@@ -433,10 +451,10 @@ Public Class ImportPageUC
    End Function
 
    Private Sub OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles ImportScene.OnMouseDownScene
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
-         OnMouseDownSceneSideAngle( e)
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked Then
+         OnMouseDownSceneSideAngle(e)
       ElseIf DripDrillBtn.IsChecked() Then
-         OnMouseDownSceneUnderDrill( e)
+         OnMouseDownSceneUnderDrill(e)
       ElseIf FiloTopBtn.IsChecked() Then
          OnMouseDownSceneFiloTop( e)
       End If
@@ -619,7 +637,7 @@ Public Class ImportPageUC
 
    Private Sub SelectedPartChanged()
       ' Se sono in modalità inclinazioni o gocciolatoio calcolo lati inclinabili e creo testi
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked() Then
          m_SideAngleUC.ReLoadSideAnglePage()
       End If
    End Sub
@@ -680,8 +698,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -712,8 +734,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -744,8 +770,12 @@ Public Class ImportPageUC
       ' abilito bottone angoli su lati esterni
       SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
       FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
       DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
    End Sub
@@ -1029,22 +1059,24 @@ Public Class ImportPageUC
       ' Salvo direttorio corrente
       WritePrivateProfileString(S_FLATPARTS, K_FLPCURRDIR, m_sCurrDir, m_MainWindow.GetIniFile())
       ' Tolgo pagina inclinazioni/gocciolatoi se attiva
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_SideAngleUC)
          If SideAngleBtn.IsChecked() Then
             SideAngleBtn.IsChecked = False
+         ElseIf EngraveBtn.IsChecked() Then
+            EngraveBtn.IsChecked = False
          Else
             DripCutBtn.IsChecked() = False
          End If
-      ' Tolgo pagina fori da sotto se attiva
+         ' Tolgo pagina fori da sotto se attiva
       ElseIf DripDrillBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
          LeftGrid.Children.Remove(m_UnderDrillUC)
          DripDrillBtn.IsChecked() = False
-      ' Tolgo pagina Filo Top se attiva
+         ' Tolgo pagina Filo Top se attiva
       ElseIf FiloTopBtn.IsChecked() Then
          FilePathTxBl.Visibility = Windows.Visibility.Visible
          FileListBox.Visibility = Windows.Visibility.Visible
@@ -1071,7 +1103,11 @@ Public Class ImportPageUC
          FileListBox.Visibility = Windows.Visibility.Hidden
          ' Disabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
          FiloTopBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1093,8 +1129,72 @@ Public Class ImportPageUC
          EgtDeselectAll()
          ' Riabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
+         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
+         mmBtn.IsEnabled = True
+         inchBtn.IsEnabled = True
+         ' Elimino scritte angoli per input e inserisco quelle definitive
+         SideAngle.WriteSideAngleForNest(ImportScene.GetCtx())
+         ' Riabilito bottone reset
+         ResetBtn.IsEnabled = True
+         ' Pulisco area messaggi
+         MessageTxBx.Text = ""
+         MessageBrd.Background = Brushes.Transparent
+      End If
+      EgtZoom(ZM.ALL)
+   End Sub
+
+   Private Sub EngraveBtn_Click(sender As Object, e As RoutedEventArgs) Handles EngraveBtn.Click
+      If EngraveBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
+         ' Aggiungo regioni per percorsi interni
+         AdjustSelectRegions()
+         ' Dichiaro nessuna selezione
+         m_nSelectedPart = GDB_ID.NULL
+         m_nSelectedLayer = GDB_ID.NULL
+         ' Imposto modalità sideangle
+         m_SideAngleUC.m_Mode = SideAngleUC.ModeOpt.ENGRAVE
+         LeftGrid.Children.Add(m_SideAngleUC)
+         FilePathTxBl.Visibility = Windows.Visibility.Hidden
+         FileListBox.Visibility = Windows.Visibility.Hidden
+         ' Disabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
+         SideAngleBtn.IsEnabled = False
+         FiloTopBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         End If
+         DripDrillBtn.IsEnabled = False
+         mmBtn.IsEnabled = False
+         inchBtn.IsEnabled = False
+         ' Disabilito bottone reset
+         ResetBtn.IsEnabled = False
+         ' Messaggio di selezione da effettuare
+         MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+         MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
+      Else
+         FinderGrd.Visibility = Visibility.Visible
+         ' Rimuovo regioni per percorsi interni
+         RemoveSelectRegions()
+         FilePathTxBl.Visibility = Windows.Visibility.Visible
+         FileListBox.Visibility = Windows.Visibility.Visible
+         LeftGrid.Children.Remove(m_SideAngleUC)
+         ' Deseleziono eventuali pezzi rimasti selezionati
+         m_nSelectedPart = GDB_ID.NULL
+         m_nSelectedLayer = GDB_ID.NULL
+         EgtDeselectAll()
+         ' Riabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
+         FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
+         SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         End If
          DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                   Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
          mmBtn.IsEnabled = True
@@ -1124,6 +1224,9 @@ Public Class ImportPageUC
          ' Disabilito SideAngleBtn,FiloTop,  DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = False
          FiloTopBtn.IsEnabled = False
+         If DripCutBtn.Visibility <> Visibility.Visible Then
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1144,8 +1247,9 @@ Public Class ImportPageUC
          ' Riabilito SideAngleBtn, FiloTop, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
-                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
+         If DripCutBtn.Visibility <> Visibility.Visible Then
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          mmBtn.IsEnabled = True
          inchBtn.IsEnabled = True
          ' Elimino scritte angoli per input e inserisco quelle definitive
@@ -1174,7 +1278,11 @@ Public Class ImportPageUC
          ' Disabilito SideAngleBtn, FiloTop, DripCutBtn e unità di misura
          SideAngleBtn.IsEnabled = False
          FiloTopBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
          ' Disabilito bottone reset
@@ -1196,8 +1304,12 @@ Public Class ImportPageUC
          ' Riabilito SideAngleBtn, FiloTop, DripCutBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
          FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          mmBtn.IsEnabled = True
          inchBtn.IsEnabled = True
          ' Riabilito bottone reset
@@ -1223,7 +1335,11 @@ Public Class ImportPageUC
          FileListBox.Visibility = Windows.Visibility.Hidden
          ' Disabilito SideAngleBtn, DripCutBtn, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
          DripDrillBtn.IsEnabled = False
          mmBtn.IsEnabled = False
          inchBtn.IsEnabled = False
@@ -1245,8 +1361,12 @@ Public Class ImportPageUC
          EgtDeselectAll()
          ' Riabilito SideAngleBtn, DripCutBtn, DripDrillBtn e unità di misura
          SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                 Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
          DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                   Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
          mmBtn.IsEnabled = True

Machine/MachiningDbPageUC.xaml.vb

@@ -61,7 +61,7 @@ Public Class MachiningDbPageUC
       StepType = {EgtMsg(MSG_COMBOBOXPARAM + 38), EgtMsg(MSG_COMBOBOXPARAM + 39), EgtMsg(MSG_COMBOBOXPARAM + 40)}
       RouFinStepType = {EgtMsg(MSG_COMBOBOXPARAM + 38), EgtMsg(MSG_COMBOBOXPARAM + 39)}
       ExtCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44), EgtMsg(MSG_COMBOBOXPARAM + 45)}
-      IntCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44)}
+      IntCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44), EgtMsg(90852)}
 
       ' Assegno array a combobox
       WorkSideCmBx.ItemsSource = WorkSide

MainWindow.xaml.vb

@@ -343,8 +343,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2605, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2605, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2607, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2607, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Impostazione per programma OnlyFrame: solo se CUT_BASE non attivo

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.6.5.2")>
-<Assembly: AssemblyFileVersion("2.6.5.2")>
+<Assembly: AssemblyVersion("2.6.7.6")>
+<Assembly: AssemblyFileVersion("2.6.7.6")>

NcComm/CNCommunication.vb

@@ -4,6 +4,7 @@ Imports System.Collections.ObjectModel
 Imports EgtUILib
 Imports System.IO
 Imports System.Text
+Imports EgtWPFLib.EgtMsgBox
 Imports OmagCUT.CN_generico
 
 Public Class CNCommunication
@@ -240,6 +241,16 @@ Public Class CNCommunication
       m_bInInches = (GetPrivateProfileInt(S_AXES, K_ININCHES, 0, m_MainWindow.GetMachIniFile()) <> 0)
    End Sub
 
+   Private Sub KillSimensCom(sProcessName As String)
+      Dim sAppName As String = Path.GetFileNameWithoutExtension(sProcessName)
+      Dim pList() As System.Diagnostics.Process = System.Diagnostics.Process.GetProcesses
+      For Each proc As System.Diagnostics.Process In pList
+         If proc.ProcessName.ToString = sAppName Then
+            proc.Kill()
+         End If
+      Next
+   End Sub
+
    Private Sub InitCn()
 
       m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Yellow")
@@ -275,6 +286,7 @@ Public Class CNCommunication
 
          ' Recupero e imposto le variabili per i dati del CN (feed, speed,...)
          GetPrivateProfileString(S_NCDATA, K_COMM, "XIP01, 0, 10, 0, 0, 0", sVal, m_MainWindow.GetMachIniFile())
+         EgtOutLog(" → Tipo di comunicazione: " & sVal)
          m_CN.SetCnDataVar(CN_generico.CnData.Comm, sVal)
          GetPrivateProfileString(S_NCDATA, K_REFRESH, "200", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.Refresh, sVal)
@@ -406,8 +418,9 @@ Public Class CNCommunication
          EgtOutLog("Error starting NC communication : " & ex.Message)
       End Try
 
-      '' Per forzare la lettura delle variabili siemens di configurazione
-      'm_nNCType = 3
+      '' !!!!!!!!!!!!! Per forzare la lettura delle variabili siemens di configurazione !!!!!!!!!!!!!
+      ' m_nNCType = 3
+      '' !!!!!!!!!!!!! Per forzare la lettura delle variabili siemens di configurazione !!!!!!!!!!!!!
 
       Select Case m_nNCType
          Case 0   'Debug
@@ -433,33 +446,27 @@ Public Class CNCommunication
                Try
                   m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_DarkGray")
                   Dim sArg As String = "-start """ & m_sCNSiemensPath & """"
+
+                  ' !!!!!!!!!!!!!! FORZO LA SIMULAZIONE DELLA LETTURA DELLE VARIBILI E SIEMENS !!!!!!!!!!!!!!
+                  EgtOutLog("ProcessStart : " & """" & m_sCNSiemensHMIPath & """" & " " & sArg)
+                  KillSimensCom(m_sCNSiemensHMIPath)
                   Process.Start(m_sCNSiemensHMIPath, sArg)
+                  ' !!!!!!!!!!!!!! FORZO LA SIMULAZIONE DELLA LETTURA DELLE VARIBILI E SIEMENS !!!!!!!!!!!!!!
+
                   EgtOutLog("ProcessStart : " & """" & m_sCNSiemensHMIPath & """" & " " & sArg)
                   m_CN.m_IsSiemensOne = GetPrivateProfileInt(S_NCSIEMENS, K_ISSIEMENSONE, 0, m_MainWindow.GetMachIniFile()) > 0
                   m_CN.m_IsActiveModeSubscription = GetPrivateProfileInt(S_NCSIEMENS, K_ISACTIVEMODESUBSCR, 0, m_MainWindow.GetMachIniFile()) > 0
                   If m_CN.m_IsSiemensOne Then
 
-                     ' ' Creo l'abbonamento delle seguenti varibili che saranno sempre lette in ciclo dal Siemenscomm
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.Laser), VarType.TInteger, 0)
-                     ' ' stati bottoni ventose
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.LaserTrac), VarType.TInteger, 1)
-                     ' ' stati porte
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.DoorClosed), VarType.TInteger, 2)
-                     ' ' ventose
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.BlowState), VarType.TInteger, 3)
-                     ' ' stati bottoni parte 2
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.CBAxes), VarType.TInteger, 4)
-                     ' ' ampere e ampere override
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.Spindle), VarType.TDouble, 0)
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.SpeedOvr), VarType.TDouble, 1)
-
                      ' Leggo tutte le varaibili che sono state caricate nel percorso [NcData] del file *.ini
                      Dim nIndexArrayBool As Integer = 0
                      Dim nIndexArrayInt As Integer = 0
                      Dim nIndexArrayLong As Integer = 0
                      Dim nIndexArrayDoub As Integer = 0
                      Dim nIndexArrayStr As Integer = 0
-                     ' Creo un vettore che mi permetta di risalire a cose contiene ogni vettore FLAG (di tipo Enum) 
+                     ' lista che associa Indice del vettore al nome (per associazioni Bit a Bit)
+                     Dim ListIndexToVar As New List(Of IndexArrayToBit)
+                     ' Creo un vettore che mi permetta di risalire a cosa contiene ogni vettore FLAG (di tipo Enum) 
                      For ItemIndex As Integer = 0 To m_CN.m_szCnDataVar.Count - 1
                         ' escludo i Flag 'Comm' e 'Refresh'
                         If ItemIndex = CnData.Comm Or ItemIndex = CnData.Refresh Then
@@ -511,6 +518,35 @@ Public Class CNCommunication
                                        m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayStr)
                                        ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayStr, ItemIndex, nVarType))
                                        nIndexArrayStr += 1
+                                    Case 5
+                                       If nIndexArrayInt > 14 Then
+                                          Continue For
+                                       End If
+                                       ' verifico se devo riempire un vettore con bit
+                                       Dim sSubItem As String() = sItem(1).Split("."c)
+                                       ' //My. name. Is Bond._James Bond!
+                                       Dim sVarName = String.Join(".", sSubItem.Take(sSubItem.Length - 1)) ' //My. name. Is Bond
+                                       Dim sIndexBit = sSubItem.Last() ' //_James Bond!
+                                       If sSubItem.Count > 1 And IsNumeric(sIndexBit) Then
+                                          Dim bFound As Boolean = False
+                                          Dim nIndexArrayInt_1 As Integer = nIndexArrayInt
+                                          For Each VarSiemens As IndexArrayToBit In ListIndexToVar
+                                             If VarSiemens.sNameVar.Trim = sVarName.Trim Then
+                                                nIndexArrayInt_1 = VarSiemens.nIndex
+                                                bFound = True
+                                                Exit For
+                                             End If
+                                          Next
+                                          nVarType = VarType.TInteger
+                                          m_CN.DVariables_Read_Subscription(sVarName, nVarType, nIndexArrayInt_1)
+                                          ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayInt_1, ItemIndex, nVarType, sIndexBit))
+                                          If Not bFound Then
+                                             nIndexArrayInt += 1
+                                             ListIndexToVar.Add(New IndexArrayToBit(nIndexArrayInt_1, sVarName.Trim))
+                                          End If
+                                       Else
+                                          EgtOutLog(" ATTENZIONE: in [NcData] '" & m_CN.m_szCnDataVar(ItemIndex) & "' non è inidicato il bit associato")
+                                       End If
                                     Case Else
                                        If nIndexArrayInt > 14 Then
                                           Continue For
@@ -521,6 +557,8 @@ Public Class CNCommunication
                                        nIndexArrayInt += 1
                                  End Select
                               End If
+                           Else
+                              EgtOutLog(" ATTENZIONE: in [NcData] '" & m_CN.m_szCnDataVar(ItemIndex) & "' non è indicato il tipo (0→Bool,1→Int,2→Long,3→Double,4→String,5→Bit)")
                            End If
                         End If
                      Next
@@ -528,6 +566,7 @@ Public Class CNCommunication
 
                      ' Recupero il perocorso delle variabili PLC
                      GetPrivateProfileString(S_NCSIEMENS, K_DBVARPATH, "", m_CN.m_DbVarPath, m_MainWindow.GetMachIniFile)
+
                   ElseIf m_CN.m_IsActiveModeSubscription Then
                      m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.BlowState), VarType.TInteger, 3)
                   End If
@@ -1055,6 +1094,68 @@ Public Class CNCommunication
       'Laser = 16384
    End Enum
 
+#Region "MASCHERA per conttrollo Bit a Bit"
+   <Flags()>
+   Public Enum Mask As Integer
+      bit_Err = -1
+      bit_0 = &H1       ' 1
+      bit_1 = &H2       ' 2
+      bit_2 = &H4       ' 4
+      bit_3 = &H8       ' 8
+      bit_4 = &H10      ' 16
+      bit_5 = &H20      ' 32
+      bit_6 = &H40      ' 64
+      bit_7 = &H80      ' 128
+      bit_8 = &H100     ' 256
+      bit_9 = &H200     ' 512
+      bit_10 = &H400     ' 1024
+      bit_11 = &H800     ' 2048
+      bit_12 = &H1000    ' 4096
+      bit_13 = &H2000    ' 8192
+      bit_14 = &H4000    ' 16384
+      bit_15 = &H8000    ' 32768
+   End Enum
+
+   Public Function GetMaskByBit(IndexBit As Integer) As Mask
+      Dim Bit_ As Mask = Mask.bit_Err
+      Select Case IndexBit
+         Case 0
+            Bit_ = Mask.bit_0
+         Case 1
+            Bit_ = Mask.bit_1
+         Case 2
+            Bit_ = Mask.bit_2
+         Case 3
+            Bit_ = Mask.bit_3
+         Case 4
+            Bit_ = Mask.bit_4
+         Case 5
+            Bit_ = Mask.bit_5
+         Case 6
+            Bit_ = Mask.bit_6
+         Case 7
+            Bit_ = Mask.bit_7
+         Case 8
+            Bit_ = Mask.bit_8
+         Case 9
+            Bit_ = Mask.bit_9
+         Case 10
+            Bit_ = Mask.bit_10
+         Case 11
+            Bit_ = Mask.bit_11
+         Case 12
+            Bit_ = Mask.bit_12
+         Case 13
+            Bit_ = Mask.bit_13
+         Case 14
+            Bit_ = Mask.bit_14
+         Case 15
+            Bit_ = Mask.bit_15
+      End Select
+      Return Bit_
+   End Function
+#End Region    ' Maschera per controllo Bit a Bit
+
    Public Function IsSetAll(value As Integer, flag As Integer) As Boolean
       ' somma Bit a Bit
       Return ((value And flag) = flag)
@@ -1070,7 +1171,7 @@ Public Class CNCommunication
 
       m_MachineStatus.DisplaySpeed()
 
-      m_MachineStatus.DisplayPower()
+      'm_MachineStatus.DisplayPower()
 
       m_MachineStatus.DisplayVar()
       'EgtOutLog("Modo attivato: " & m_CN.read_active_mode & " modo attivo: " & m_nCurrMode)
@@ -1103,66 +1204,17 @@ Public Class CNCommunication
          End If
       End If
 
+      ' lettura delle variabili abbonate
       If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
 
-         ' ' lettura variabili stati mancanti su Siemens
-         ' Dim nVarValue As Integer = m_CN.n_data(0)
-         ' EgtOutLog("Variabile PLC control addr: " & 1 & " value: " & nVarValue)
-         ' m_CN.bSpindleState = IsSetAll(nVarValue, ControlStates.Spindle)
-         ' m_CN.bLaserTracState = IsSetAll(nVarValue, ControlStates.LaserTrac)
-         ' m_CN.bCoolantState = IsSetAll(nVarValue, ControlStates.Coolant)
-         ' m_CN.bInternalCoolantState = IsSetAll(nVarValue, ControlStates.InternalCoolant)
-         ' m_CN.bExternCoolantState = IsSetAll(nVarValue, ControlStates.ExternCoolant)
-         ' m_CN.bCBAxesState = IsSetAll(nVarValue, ControlStates.CAxis)
-         ' m_CN.bAirBlowState = IsSetAll(nVarValue, ControlStates.AirBlow)
-         ' m_CN.bHomeState = IsSetAll(nVarValue, ControlStates.Home)
-         ' m_CN.bTableUpState = IsSetAll(nVarValue, ControlStates.TableUp)
-         ' m_CN.bTableDownState = IsSetAll(nVarValue, ControlStates.TableDown)
-         ' m_CN.bLimitZState = IsSetAll(nVarValue, ControlStates.LimitZ)
-         ' m_CN.b5AxesState = IsSetAll(nVarValue, ControlStates.Axis5)
-
-         'nVarValue = m_CN.n_data(1)
-         ''EgtOutLog("Variabile PLC vacuum  addr: " & m_CN.m_szCnDataVar(CN_generico.CnData.LaserTrac) & " value: " & nVarValue)
-         'm_CN.bVacuumUp = IsSetAll(nVarValue, VacuumStates.VacuumUp)
-         'm_CN.bVacuumDown = IsSetAll(nVarValue, VacuumStates.VacuumDown)
-         'm_CN.bVacuum2Up = IsSetAll(nVarValue, VacuumStates.Vacuum2Up)
-         'm_CN.bVacuum2Down = IsSetAll(nVarValue, VacuumStates.Vacuum2Down)
-         'm_CN.bVacuum1State = IsSetAll(nVarValue, VacuumStates.Vacuum1State)
-         'm_CN.bVacuum2State = IsSetAll(nVarValue, VacuumStates.Vacuum2State)
-         'm_CN.bVacuum3State = IsSetAll(nVarValue, VacuumStates.Vacuum3State)
-         'm_CN.bVacuum4State = IsSetAll(nVarValue, VacuumStates.Vacuum4State)
-         'm_CN.bVacuum5State = IsSetAll(nVarValue, VacuumStates.Vacuum5State)
-         'm_CN.bVacuum6State = IsSetAll(nVarValue, VacuumStates.Vacuum6State)
-         'm_CN.bOpenAllState = (m_CN.bVacuum1State And m_CN.bVacuum2State And m_CN.bVacuum3State And m_CN.bVacuum4State And m_CN.bVacuum5State And m_CN.bVacuum6State)
-         'm_CN.bCloseAllState = (Not m_CN.bVacuum1State And Not m_CN.bVacuum2State And Not m_CN.bVacuum3State And Not m_CN.bVacuum4State And Not m_CN.bVacuum5State And Not m_CN.bVacuum6State)
-         'm_CN.bOpen123State = (m_CN.bVacuum1State And m_CN.bVacuum2State And m_CN.bVacuum3State)
-         'm_CN.bOpen456State = (m_CN.bVacuum4State And m_CN.bVacuum5State And m_CN.bVacuum6State)
-         'm_CN.bClose123State = (Not m_CN.bVacuum1State And Not m_CN.bVacuum2State And Not m_CN.bVacuum3State)
-         'm_CN.bClose456State = (Not m_CN.bVacuum4State And Not m_CN.bVacuum5State And Not m_CN.bVacuum6State)
-         'm_CN.bBlowState = IsSetAll(nVarValue, VacuumStates.AirBlow)
-         'm_CN.bVacuumOn = IsSetAll(nVarValue, VacuumStates.VacuumOn)
-         'm_CN.bVacuumOff = IsSetAll(nVarValue, VacuumStates.VacuumOff)
-         'm_CN.bBypassState = IsSetAll(nVarValue, VacuumStates.BypassState)
-         '
-         'nVarValue = m_CN.n_data(2)
-         ''EgtOutLog("Variabile PLC  door addr: " & m_CN.m_szCnDataVar(CN_generico.CnData.DoorClosed) & " value: " & nVarValue)
-         'm_CN.nDoorClosedState = nVarValue
-         '
-         'nVarValue = m_CN.n_data(4)
-         ''EgtOutLog("Variabile PLC control 2 addr: " & 3 & " value: " & nVarValue)
-         'm_CN.bLaserState = IsSetAll(nVarValue, ControlStates2.Laser)
-         'm_CN.bHsm = IsSetAll(nVarValue, ControlStates2.Hsm)
-         'm_CN.bResetState = IsSetAll(nVarValue, ControlStates2.ResetState)
-         'm_CN.bFeedHold = IsSetAll(nVarValue, ControlStates2.FeedHold)
-         'm_CN.bSpeedHold = IsSetAll(nVarValue, ControlStates2.SpindleHold)
-
          '------------ SINUMERIK ONE ----------------------------------------------
          For IndxLst As Integer = 0 To ListReferenceIndex.Count - 1
             Dim nType As Integer = ListReferenceIndex(IndxLst).TypeArray
             Dim nFlag As Integer = ListReferenceIndex(IndxLst).FlagIndex
             Dim nIndex As Integer = ListReferenceIndex(IndxLst).SiemnesArrayIndex
+            Dim nIndexBit As Integer = ListReferenceIndex(IndxLst).IndexBit
             Dim b_temp As Boolean = False
-            Dim n_temp As Boolean = 0
+            Dim n_temp As Integer = 0
             Dim l_temp As Long = 0.0
             Dim d_temp As Double = 0.0
             ' leggo il valore caricato 
@@ -1171,6 +1223,8 @@ Public Class CNCommunication
                   b_temp = m_CN.b_data(nIndex)
                Case VarType.TInteger
                   n_temp = m_CN.n_data(nIndex)
+                  ' VENTOSE: lettura dato da intero Bit a Bit (ver_2.6h1), ritorno un Boolean
+                  b_temp = ReadBit(nIndexBit, n_temp)
                Case VarType.TLong
                   l_temp = m_CN.l_data(nIndex)
                Case VarType.TDouble
@@ -1195,6 +1249,8 @@ Public Class CNCommunication
                   Else
                      m_nCountRefresh = m_nCountRefresh + 1
                   End If
+               Case CN_generico.CnData.Power
+                  m_CN.d_spindle_power = d_temp
                Case CN_generico.CnData.Spindle     ' (7) Stato rotazione mandrino
                   m_CN.bSpindleState = b_temp
                Case CN_generico.CnData.Coolant     ' (8) Stato acqua
@@ -1293,6 +1349,8 @@ Public Class CNCommunication
 
       End If
 
+      m_MachineStatus.DisplayPower()
+
       ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
       If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
          If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
@@ -1382,6 +1440,14 @@ Public Class CNCommunication
 
    End Sub
 
+   Private Function ReadBit(IndexBit As Integer, Val As Integer) As Boolean
+      If IndexBit < 0 Then Return False
+      Dim _mask = GetMaskByBit(IndexBit)
+      If _mask = Mask.bit_Err Then Return False
+      If (Val And _mask) = 0 Then Return False
+      Return True
+   End Function
+
    Friend Function SetProgramMainOrSub(bMain As Boolean) As Boolean
       Return m_CN.SetProgramMainOrSub(bMain)
    End Function
@@ -1599,6 +1665,8 @@ Public Class RefereceFlagSimens
    Private m_SiemnesArrayIndex As Integer
    Private m_FlagIndex As Integer
    Private m_TypeArray As Integer
+   ' Opzionale
+   Private m_IndexBit As Integer = -1
 
    Public Property SiemnesArrayIndex As Integer
       Get
@@ -1627,10 +1695,49 @@ Public Class RefereceFlagSimens
       End Set
    End Property
 
+   Public Property IndexBit As String
+      Get
+         Return m_IndexBit
+      End Get
+      Set(value As String)
+         m_IndexBit = value
+      End Set
+   End Property
+
    Sub New(IndArray As Integer, Flag As Integer, nType As Integer)
       m_SiemnesArrayIndex = IndArray
       m_FlagIndex = Flag
       m_TypeArray = nType
    End Sub
 
+   Sub New(IndArray As Integer, Flag As Integer, nType As Integer, nIndBit As Integer)
+      m_SiemnesArrayIndex = IndArray
+      m_FlagIndex = Flag
+      m_TypeArray = nType
+      m_IndexBit = nIndBit
+   End Sub
+
+End Class
+
+Public Class IndexArrayToBit
+
+   Private m_nIndex As Integer = 0
+   Public ReadOnly Property nIndex As Integer
+      Get
+         Return m_nIndex
+      End Get
+   End Property
+
+   Private m_sNameVar As String = ""
+   Public ReadOnly Property sNameVar As String
+      Get
+         Return m_sNameVar
+      End Get
+   End Property
+
+   Sub New(Index As Integer, NameVar As String)
+      m_nIndex = Index
+      m_sNameVar = NameVar
+   End Sub
+
 End Class

NcComm/CN_Siemens.vb

@@ -228,7 +228,7 @@ Public Class CN_Siemens
    Public Overrides Sub DVariables_Read_Subscription(VarAddr As String, ParType As Short, Index As Integer)
       ' Ricevo il percorso della varibile, il tipo 
       Dim n_ret As Short = Read_subscription(VarAddr, ParType, Index)
-      'EgtOutLog("CN SIEMENS Dopo lettura abbonamento")
+      EgtOutLog(" ABBONAMENTO (Esito: " & n_ret.ToString & ") -> Address: " & VarAddr & ", Type: " & ParType.ToString & ", Index: " & Index.ToString)
    End Sub
 
    '

NcComm/M_MMFiles.vb

@@ -345,6 +345,9 @@ Module M_MMFiles
    Function ActivateProgram(ByVal sz_part_program As String) As Short
       'EgtOutLog("ActivateProgram start dell'm_mmFiles")
 
+      EgtOutLog("Flag di comando: " & CMD.CMD_ActivateProgram.ToString)
+      EgtOutLog("Stringa di comando: " & sz_part_program.ToString)
+
       SiemensSend.n_Command = CMD.CMD_ActivateProgram
       SiemensSend.sz_string = sz_part_program
 
@@ -600,16 +603,15 @@ Module M_MMFiles
       'EgtOutLog("Write_Nc_var start dell'm_mmFiles")
       SiemensSend.n_Command = CMD.CMD_Read_NC_subscription
       SiemensSend.sz_string_2 = VarAddr ' indirizzo su CN dell' oggetto da scrivere 
-      EgtOutLog(" Sottoscrivo lettura di '" & VarAddr & "'")
+      EgtOutLog(" → Sottoscrivo lettura di '" & VarAddr & "'")
       SiemensSend.n_param1 = Index   ' tipo di dato da scrivere
-      EgtOutLog(" Indice del vettore associato '" & Index & "'")
+      EgtOutLog("   Indice del vettore associato '" & Index & "'")
       SiemensSend.n_param2 = ParType   ' tipo di dato da scrivere
-      EgtOutLog(" Indice tipo di variabile '" & ParType & "'")
+      EgtOutLog("   Indice tipo di variabile '" & ParType & "'")
       execute_command()
       m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message = SiemensRet.sz_interf_error_message
-
-      EgtOutLog("sz_interf_error_message: " & m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message)
-      EgtOutLog("n_result: " & SiemensRet.n_result)
+      EgtOutLog("   sz_interf_error_message: " & m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message)
+      EgtOutLog("   n_result: " & SiemensRet.n_result)
       Return SiemensRet.n_result
    End Function
 

NcComm/M_Num_old.vb

@@ -289,6 +289,7 @@ Namespace Num
 
          ' Stringhe valide : "COM" o "XIP01, 0, 10, 0, 0, 0"
          Dim nret As Integer = NC_connect(m_szCnDataVar(CnData.Comm))
+         EgtOutLog(" → Risultatao apertura connessiione: " & nret)
          If nret <> 0 Then Return False
 
          n_state = 2
@@ -583,7 +584,6 @@ Namespace Num
       End Function
 
       Function Read_machine_pos() As Int16
-
          Dim nret As Int16
          Dim i, n As Integer
 

Project/CurrentProjectPageUC.xaml.vb

@@ -7,6 +7,7 @@ Imports EgtWPFLib5
 Public Class CurrentProjectPageUC
    ' Dichiarazione eventi
    Friend Event OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+   Friend Event OnMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    ' Riferimento alla MainWindow
@@ -336,6 +337,10 @@ Public Class CurrentProjectPageUC
       RaiseEvent OnMouseDownScene(sender, e)
    End Sub
 
+   Private Sub OnMyMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.MouseDoubleClick
+      RaiseEvent OnMouseDownScene_DoubleClick(sender, e)
+   End Sub
+
    Private Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.OnMouseMoveScene
       RaiseEvent OnMouseMoveScene(sender, e)
    End Sub
@@ -495,7 +500,9 @@ Public Class CurrentProjectPageUC
       ' Nuova geometria
       Dim nAddTabId As Integer = GDB_ID.NULL
       ' Se esiste geometria di riferimento
-      Dim nRefAddTabId = EgtGetFirstNameInGroup( EgtGetFirstNameInGroup( EgtGetTableId( MAIN_TAB), "SOLID"), MACH_ADD_TABLE)
+      Dim sNameTable As String = MAIN_TAB
+      EgtGetTableName(sNameTable)
+      Dim nRefAddTabId = EgtGetFirstNameInGroup(EgtGetFirstNameInGroup(EgtGetTableId(sNameTable), "SOLID"), MACH_ADD_TABLE)
       If nRefAddTabId <> GDB_ID.NULL Then
          nAddTabId = EgtCopyGlob( nRefAddTabId, nFixtId)
          EgtSetStatus( nAddTabId, GDB_ST.ON_)

RawPhoto/RawPartPageUC.xaml

@@ -136,7 +136,9 @@
                   Style="{DynamicResource OmagCut_YellowToggleButton}"/>
                     <ToggleButton Name="RemoveBtn" Grid.Column="1"
                   Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-                    <Button Name="CloseBtn" Grid.Row="1" Grid.ColumnSpan="2" 
+                    <Button Name="CloseBtn" Grid.Row="1" 
+                  Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                    <Button Name="RectangleBtn" Grid.Row="1" Grid.Column="1"
                   Style="{DynamicResource OmagCut_YellowTextButton}"/>
                 </Grid>
 

RawPhoto/RawPartPageUC.xaml.vb

@@ -210,6 +210,7 @@ Public Class RawPartPageUC
       AddBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 14)           'Add - Aggiungi
       RemoveBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 15)        'Remove - Rimuovi
       CloseBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 31)         'Close - Chiudi
+      RectangleBtn.Content = "Rectangle"
       ConfirmPhotoBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 24)  'Conferma
 
       OtherRefTabTxBl.Text = "New Ref On Tab"
@@ -328,6 +329,7 @@ Public Class RawPartPageUC
          RawModeCmBx.SelectedIndex = RAWMODE.BY_POINTS
          PointsGpBx.Visibility = Windows.Visibility.Visible
          CloseBtn.Visibility = Windows.Visibility.Hidden
+         RectangleBtn.Visibility = Windows.Visibility.Hidden
          ' Visualizzo crocette
          UpdateCircles()
          EgtZoom(ZM.ALL)
@@ -756,6 +758,8 @@ Public Class RawPartPageUC
    End Sub
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      CloseBtn.IsEnabled = False
+      RectangleBtn.IsEnabled = False
       ' Non è possibile uscire con tastatura in corso
       If m_bProbingOn Then Return
       ' reimposto il comando OutLine
@@ -921,6 +925,7 @@ Public Class RawPartPageUC
             RawModeView()
             ' Disattivo il bottone
             CloseBtn.IsEnabled = False
+            RectangleBtn.IsEnabled = False
             OkBtn.IsEnabled = False
          Case 3          ' Da Lama
             If Not m_MainWindow.m_CurrentMachine.bSaw Then    ' Da fotografia
@@ -953,6 +958,7 @@ Public Class RawPartPageUC
             RawModeView()
             ' Disattivo il bottone
             CloseBtn.IsEnabled = False
+            RectangleBtn.IsEnabled = False
             OkBtn.IsEnabled = False
          Case 4          ' Da fotografia
             ' Se ero in modalità da laser
@@ -1017,6 +1023,7 @@ Public Class RawPartPageUC
             AddBtn.SetValue(Grid.RowSpanProperty, 2)
             RemoveBtn.SetValue(Grid.RowSpanProperty, 2)
             CloseBtn.Visibility = Windows.Visibility.Hidden
+            RectangleBtn.Visibility = Windows.Visibility.Hidden
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
@@ -1039,6 +1046,7 @@ Public Class RawPartPageUC
             AddBtn.SetValue(Grid.RowSpanProperty, 1)
             RemoveBtn.SetValue(Grid.RowSpanProperty, 1)
             CloseBtn.Visibility = Windows.Visibility.Visible
+            RectangleBtn.Visibility = Windows.Visibility.Visible
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
@@ -1061,6 +1069,7 @@ Public Class RawPartPageUC
             AddBtn.SetValue(Grid.RowSpanProperty, 2)
             RemoveBtn.SetValue(Grid.RowSpanProperty, 2)
             CloseBtn.Visibility = Windows.Visibility.Hidden
+            RectangleBtn.Visibility = Windows.Visibility.Hidden
             ' Attivo bottoni zone rovinate
             DamagedAreaGpBx.Visibility = Windows.Visibility.Visible
             ' Disattivo bottoni foto
@@ -1100,6 +1109,7 @@ Public Class RawPartPageUC
             AddBtn.SetValue(Grid.RowSpanProperty, 1)
             RemoveBtn.SetValue(Grid.RowSpanProperty, 1)
             CloseBtn.Visibility = Windows.Visibility.Visible
+            RectangleBtn.Visibility = Windows.Visibility.Visible
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
@@ -1121,6 +1131,7 @@ Public Class RawPartPageUC
             AddBtn.SetValue(Grid.RowSpanProperty, 1)
             RemoveBtn.SetValue(Grid.RowSpanProperty, 1)
             CloseBtn.Visibility = Windows.Visibility.Visible
+            RectangleBtn.Visibility = Windows.Visibility.Visible
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
@@ -1142,6 +1153,7 @@ Public Class RawPartPageUC
             AddBtn.SetValue(Grid.RowSpanProperty, 1)
             RemoveBtn.SetValue(Grid.RowSpanProperty, 1)
             CloseBtn.Visibility = Windows.Visibility.Visible
+            RectangleBtn.Visibility = Windows.Visibility.Visible
             ' Disattivo bottoni zone rovinate e foto
             DamagedAreaGpBx.Visibility = Windows.Visibility.Hidden
             ConfirmPhotoBtn.Visibility = Windows.Visibility.Hidden
@@ -1198,6 +1210,9 @@ Public Class RawPartPageUC
    End Sub
 
    Private Sub AddBtn_Click(sender As Object, e As RoutedEventArgs) Handles AddBtn.Click
+      ' disabilito i comandi di chiusura contorno
+      CloseBtn.IsEnabled = False
+      RectangleBtn.IsEnabled = False
       Select Case m_ActiveRawMode
          Case RAWMODE.RECTANGLE
             AddBtn.IsChecked = False
@@ -1246,9 +1261,15 @@ Public Class RawPartPageUC
                m_bptLast = True
             End If
             m_ptLast = ptAcquired
+            ' Se ho almeno un segmento allora deve essere la diagonale
+            If m_CurveXKerfList.Count = 1 Then
+               OkBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = True
+            End If
             If m_CurveXKerfList.Count > 1 Then
                OkBtn.IsEnabled = True
                CloseBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = False
             End If
             AddBtn.IsChecked = False
             EgtDraw()
@@ -1294,9 +1315,14 @@ Public Class RawPartPageUC
                m_bptLast = True
             End If
             m_ptLast = ptAcquired
+            If m_CurveXKerfList.Count = 1 Then
+               OkBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = True
+            End If
             If m_CurveXKerfList.Count > 1 Then
                OkBtn.IsEnabled = True
                CloseBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = False
             End If
             AddBtn.IsChecked = False
             EgtDraw()
@@ -1352,9 +1378,14 @@ Public Class RawPartPageUC
                m_bptLast = True
             End If
             m_ptLast = ptAcquired
+            If m_CurveXDamagedAreaList.Count = 1 Then
+               OkBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = True
+            End If
             If m_CurveXDamagedAreaList.Count > 1 Then
                OkBtn.IsEnabled = True
                CloseBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = False
             End If
             AddBtn.IsChecked = False
             EgtDraw()
@@ -1400,9 +1431,14 @@ Public Class RawPartPageUC
                m_bptLast = True
             End If
             m_ptLast = ptAcquired
+            If m_CurveXDamagedAreaList.Count = 1 Then
+               OkBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = True
+            End If
             If m_CurveXDamagedAreaList.Count > 1 Then
                OkBtn.IsEnabled = True
                CloseBtn.IsEnabled = True
+               RectangleBtn.IsEnabled = False
             End If
             AddBtn.IsChecked = False
             EgtDraw()
@@ -1487,6 +1523,17 @@ Public Class RawPartPageUC
                   ' Aggiorno ptLast
                   EgtEndPoint(m_CurveXKerfList(m_CurveXKerfList.Count - 1), m_ptLast)
                End If
+               ' reset dei comandi di chiusura 
+               If m_CurveXKerfList.Count = 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = False
+                  RectangleBtn.IsEnabled = True
+               End If
+               If m_CurveXKerfList.Count > 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = True
+                  RectangleBtn.IsEnabled = False
+               End If
             Else
                m_bptLast = False
             End If
@@ -1507,6 +1554,17 @@ Public Class RawPartPageUC
                   ' Aggiorno ptLast
                   EgtEndPoint(m_CurveXKerfList(m_CurveXKerfList.Count - 1), m_ptLast)
                End If
+               ' reset dei comandi di chiusura 
+               If m_CurveXKerfList.Count = 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = False
+                  RectangleBtn.IsEnabled = True
+               End If
+               If m_CurveXKerfList.Count > 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = True
+                  RectangleBtn.IsEnabled = False
+               End If
             Else
                m_bptLast = False
             End If
@@ -1537,6 +1595,17 @@ Public Class RawPartPageUC
                   ' Aggiorno ptLast
                   EgtEndPoint(m_CurveXDamagedAreaList(m_CurveXDamagedAreaList.Count - 1), m_ptLast)
                End If
+               ' reset dei comandi di chiusura 
+               If m_CurveXDamagedAreaList.Count = 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = False
+                  RectangleBtn.IsEnabled = True
+               End If
+               If m_CurveXDamagedAreaList.Count > 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = True
+                  RectangleBtn.IsEnabled = False
+               End If
             Else
                m_bptLast = False
             End If
@@ -1557,6 +1626,17 @@ Public Class RawPartPageUC
                   ' Aggiorno ptLast
                   EgtEndPoint(m_CurveXDamagedAreaList(m_CurveXDamagedAreaList.Count - 1), m_ptLast)
                End If
+               ' reset dei comandi di chiusura 
+               If m_CurveXDamagedAreaList.Count = 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = False
+                  RectangleBtn.IsEnabled = True
+               End If
+               If m_CurveXDamagedAreaList.Count > 1 Then
+                  OkBtn.IsEnabled = True
+                  CloseBtn.IsEnabled = True
+                  RectangleBtn.IsEnabled = False
+               End If
             Else
                m_bptLast = False
             End If
@@ -2581,6 +2661,21 @@ Public Class RawPartPageUC
       EgtEmptyGroup(m_nTempLay)
    End Sub
 
+   Private Sub RectangleBtn_Click(sender As Object, e As RoutedEventArgs) Handles RectangleBtn.Click
+      Select Case m_ActiveRawMode
+         Case RAWMODE.DAMAGED_BY_LASER
+            CloseDamagedAreaByLaser_Rectangle()
+         Case RAWMODE.DAMAGED_BY_SAW
+            CloseDamagedAreaBySaw_Rectangle()
+         Case RAWMODE.FROM_SAW
+            CloseRawBySaw_Rectangle()
+         Case Else
+            CloseRawByLaser_Rectangle()
+      End Select
+      ' Rimuovo eventuali crocette create acquisendo i punti nel disegno
+      EgtEmptyGroup(m_nTempLay)
+   End Sub
+
    Private Sub CloseRawByLaser()
       ' Verifico ci siano punti
       If m_CurveXKerfList.Count() = 0 Then Return
@@ -2615,6 +2710,33 @@ Public Class RawPartPageUC
       EgtDraw()
       ' Disattivo il bottone chiudi grezzo
       CloseBtn.IsEnabled = False
+      RectangleBtn.IsEnabled = False
+   End Sub
+
+   Private Sub CloseRawByLaser_Rectangle()
+      ' Verifico ci siano punti
+      If m_CurveXKerfList.Count() <> 1 Then Return
+      ' Recupero punto iniziale prima e unica linea del grezzo
+      Dim ptStart As Point3d
+      EgtStartPoint(m_CurveXKerfList(0), ptStart)
+      ' Recupero punto finale prima e unica linea del grezzo
+      Dim ptEnd As Point3d
+      EgtEndPoint(m_CurveXKerfList(0), ptEnd)
+      ' Elimo il segmemnto usato come diagonale
+      EgtErase(m_CurveXKerfList(0))
+      ' Pulisco lista entità del grezzo (che contiene la diagonale)
+      m_CurveXKerfList.Clear()
+      ' Procedo a costruire il rettangolo
+      Dim pt_Temp As Point3d = New Point3d(ptEnd.x, ptStart.y, ptStart.z)
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptStart, pt_Temp))
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, pt_Temp, ptEnd))
+      pt_Temp = New Point3d(ptStart.x, ptEnd.y, ptStart.z)
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptEnd, pt_Temp))
+      ' salvo come ultimo punto, l'ultimo calcolato
+      m_ptLast = pt_Temp
+      'CurveXKerfArray(3) = EgtCreateLine(m_CurrProjPage.m_nRawId, pt_Temp, ptStart)
+      'm_CurveXKerfList.Add(CurveXKerfArray(3))
+      CloseRawByLaser()
    End Sub
 
    Private Sub CloseRawBySaw()
@@ -2651,6 +2773,33 @@ Public Class RawPartPageUC
       EgtDraw()
       ' Disattivo il bottone chiudi grezzo
       CloseBtn.IsEnabled = False
+      RectangleBtn.IsEnabled = False
+   End Sub
+
+   Private Sub CloseRawBySaw_Rectangle()
+      ' Verifico ci siano punti
+      If m_CurveXKerfList.Count() <> 1 Then Return
+      ' Recupero punto iniziale prima e unica linea del grezzo
+      Dim ptStart As Point3d
+      EgtStartPoint(m_CurveXKerfList(0), ptStart)
+      ' Recupero punto finale prima e unica linea del grezzo
+      Dim ptEnd As Point3d
+      EgtEndPoint(m_CurveXKerfList(0), ptEnd)
+      ' Elimo il segmemnto usato come diagonale
+      EgtErase(m_CurveXKerfList(0))
+      ' Pulisco lista entità del grezzo (che contiene la diagonale)
+      m_CurveXKerfList.Clear()
+      ' Procedo a costruire il rettangolo
+      Dim pt_Temp As Point3d = New Point3d(ptEnd.x, ptStart.y, ptStart.z)
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptStart, pt_Temp))
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, pt_Temp, ptEnd))
+      pt_Temp = New Point3d(ptStart.x, ptEnd.y, ptStart.z)
+      m_CurveXKerfList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptEnd, pt_Temp))
+      ' salvo come ultimo punto, l'ultimo calcolato
+      m_ptLast = pt_Temp
+      'CurveXKerfArray(3) = EgtCreateLine(m_CurrProjPage.m_nRawId, pt_Temp, ptStart)
+      'm_CurveXKerfList.Add(CurveXKerfArray(3))
+      CloseRawBySaw()
    End Sub
 
 #Region "Damaged Area"
@@ -2707,6 +2856,32 @@ Public Class RawPartPageUC
       EgtDraw()
       ' Disattivo il bottone chiudi grezzo
       CloseBtn.IsEnabled = False
+      RectangleBtn.IsEnabled = False
+   End Sub
+
+   Private Sub CloseDamagedAreaByLaser_Rectangle()
+      ' Verifico che esista una sola linea
+      If m_CurveXDamagedAreaList.Count() <> 1 Then Return
+      ' Recupero punto iniziale prima linea del grezzo
+      Dim ptStart As Point3d
+      EgtStartPoint(m_CurveXDamagedAreaList(0), ptStart)
+      ' Recupero punto finale prima e unica linea del grezzo
+      Dim ptEnd As Point3d
+      EgtEndPoint(m_CurveXDamagedAreaList(0), ptEnd)
+      ' Elimo il segmemnto usato come diagonale
+      EgtErase(m_CurveXDamagedAreaList(0))
+      ' Pulisco lista entità del grezzo (che contiene la diagonale)
+      m_CurveXDamagedAreaList.Clear()
+      ' Procedo a costruire il rettangolo
+      Dim pt_Temp As Point3d = New Point3d(ptEnd.x, ptStart.y, ptStart.z)
+      m_CurveXDamagedAreaList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptStart, pt_Temp))
+      m_CurveXDamagedAreaList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, pt_Temp, ptEnd))
+      pt_Temp = New Point3d(ptStart.x, ptEnd.y, ptStart.z)
+      m_CurveXDamagedAreaList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptEnd, pt_Temp))
+      ' salvo come ultimo punto, l'ultimo calcolato
+      m_ptLast = pt_Temp
+      ' procedo a costruire il rettangolo
+      CloseDamagedAreaByLaser()
    End Sub
 
    Private Sub CloseDamagedAreaBySaw()
@@ -2733,6 +2908,32 @@ Public Class RawPartPageUC
       EgtDraw()
       ' Disattivo il bottone chiudi grezzo
       CloseBtn.IsEnabled = False
+      RectangleBtn.IsEnabled = False
+   End Sub
+
+   Private Sub CloseDamagedAreaBySaw_Rectangle()
+      ' Verifico che esista una sola linea
+      If m_CurveXDamagedAreaList.Count() <> 1 Then Return
+      ' Recupero punto iniziale prima linea del grezzo
+      Dim ptStart As Point3d
+      EgtStartPoint(m_CurveXDamagedAreaList(0), ptStart)
+      ' Recupero punto finale prima e unica linea del grezzo
+      Dim ptEnd As Point3d
+      EgtEndPoint(m_CurveXDamagedAreaList(0), ptEnd)
+      ' Elimo il segmemnto usato come diagonale
+      EgtErase(m_CurveXDamagedAreaList(0))
+      ' Pulisco lista entità del grezzo (che contiene la diagonale)
+      m_CurveXDamagedAreaList.Clear()
+      ' Procedo a costruire il rettangolo
+      Dim pt_Temp As Point3d = New Point3d(ptEnd.x, ptStart.y, ptStart.z)
+      m_CurveXDamagedAreaList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptStart, pt_Temp))
+      m_CurveXDamagedAreaList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, pt_Temp, ptEnd))
+      pt_Temp = New Point3d(ptStart.x, ptEnd.y, ptStart.z)
+      m_CurveXDamagedAreaList.Add(EgtCreateLine(m_CurrProjPage.m_nRawId, ptEnd, pt_Temp))
+      ' salvo come ultimo punto, l'ultimo calcolato
+      m_ptLast = pt_Temp
+      ' procedo a costruire il rettangolo
+      CloseDamagedAreaBySaw()
    End Sub
 
    Private Sub RemoveDamagedArea()