Lettura degli interi Bit a Bit

Migliorata stampa dei messaggi OutLog comunicazione
Merge branch 'develop' into Features/Manage_SimensOne
2024-07-30 14:30:53 +02:00 · 2024-07-29 13:54:57 +02:00 · 2024-07-26 18:35:54 +02:00 · 2024-07-26 14:30:35 +02:00 · 2024-07-25 15:20:47 +02:00 · 2024-07-24 08:51:27 +02:00
17 changed files with 964 additions and 421 deletions
@@ -38,6 +38,8 @@ Public Module SplitAuto
      Public m_dStartFreeLen As Double
      Public m_dEndFreeLen As Double
      Public m_vtDir As Vector3d
+      ' ver 2.6f4: tagli corti gestiti con LeadIn.OUT/LeadOut.OUT
+      Public m_bMngLeadInOnIntCorner As Boolean
   End Class

   '-----------------------------------------------------------------------------------------------
@@ -111,15 +113,19 @@ Public Module SplitAuto
                     EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
                     If Mach.m_bInvert Then Mach.m_vtDir = -Mach.m_vtDir
                     Mach.m_nEntId = nEntId
+                     EgtGetInfo(nOperId, "ManageLeadInOnIntCorner", Mach.m_bMngLeadInOnIntCorner)
                  End If
                  ' verifico se trasformabile in un taglio di separazione (almeno da un lato)
-                  If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL) And
+                  If (dStartAddLen > -EPS_SMALL Or dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And
                     Mach.m_sLay = NAME_OUTLOOP And Mach.m_nInterf = FMI_TYPE.NONE Then
                     Dim nRes As Integer = EgtVerifyCutAsSplitting(nOperId)
-                     Mach.m_bCanStartAll = (dStartAddLen > -EPS_SMALL And (nRes And CAR_RES.LI_OK) <> 0) And
-                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine
-                     Mach.m_bCanEndAll = (dEndAddLen > -EPS_SMALL And (nRes And CAR_RES.LO_OK) <> 0) And
-                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine
+                     Dim bIn As Boolean = False
+                     Dim bOut As Boolean = False
+                     CanExtendSides(Mach, bIn, bOut)
+                     Mach.m_bCanStartAll = ((dStartAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LI_OK) <> 0) And
+                                           Mach.m_dStartFreeLen > FREELEN_INF And Mach.m_bIsLine And bIn
+                     Mach.m_bCanEndAll = ((dEndAddLen > -EPS_SMALL Or Mach.m_bMngLeadInOnIntCorner) And (nRes And CAR_RES.LO_OK) <> 0) And
+                                         Mach.m_dEndFreeLen > FREELEN_INF And Mach.m_bIsLine And bOut
                     If nRes = 0 Then
                        EgtOutLog("Operation ID " & nOperId.ToString & " isn't split cut! verify depth machining.")
                     End If
@@ -171,6 +177,26 @@ Public Module SplitAuto
      Return True
   End Function

+   Private Function CanExtendSides(CurrMach As SplitMach, ByRef bIn As Boolean, ByRef bOut As Boolean) As Boolean
+      If CurrMach.m_dPrevAng < -EPS_ANG_SMALL And CurrMach.m_dNextAng > EPS_ANG_SMALL Then
+         ' Posso estendere SOLO l'uscita
+         bOut = True
+         bIn = False
+      ElseIf CurrMach.m_dPrevAng > EPS_ANG_SMALL And CurrMach.m_dNextAng < -EPS_ANG_SMALL Then
+         ' Posso estendere SOLO l'ingresso
+         bIn = True
+         bOut = False
+      ElseIf CurrMach.m_dPrevAng < -EPS_ANG_SMALL And CurrMach.m_dNextAng < -EPS_ANG_SMALL Then
+         ' NON Posso estendere
+         bIn = False
+         bOut = False
+      Else
+         bIn = True
+         bOut = True
+      End If
+      Return True
+   End Function
+
   '-----------------------------------------------------------------------------------------------
   ' calcolo il numero di tipi di lavorazioni
   Friend Sub CountMachiningType(MachSplit As SplitMach, ByRef nCountSawing As Integer, ByRef nCountWaterjetting As Integer, ByRef nCountOtherMachining As Integer)
@@ -799,13 +825,13 @@ Public Module SplitAuto

   Private Function ExecMove(nDispId As Integer, vNewRaws As List(Of Integer),
                             vtMove As Vector3d, dMinMove As Double) As Boolean
-      Dim bTwoHeadVac As Boolean = ( EgtGetHeadId( VACUUM_HEAD_2) <> GDB_ID.NULL)
+      Dim bTwoHeadVac As Boolean = (EgtGetHeadId(VACUUM_HEAD_2) <> GDB_ID.NULL)
      Dim rmData As New RawMoveData
      Dim vtMove2 As Vector3d = -vtMove

      VacuumCups.ResetHeadName()
      Dim bPutVacuum As Boolean = PutVacuumCupsOnRaw(vNewRaws(1), rmData)
-      If Not bPutVacuum And bTwoHeadVac Then bPutVacuum= PutVacuumCupsOnRaw(vNewRaws(1), rmData)
+      If Not bPutVacuum And bTwoHeadVac Then bPutVacuum = PutVacuumCupsOnRaw(vNewRaws(1), rmData)
      If bPutVacuum AndAlso SafeMoveRawPart(vNewRaws(1), vtMove, dMinMove) Then
         rmData.m_vtRawMove = vtMove
         SaveOneMoveInfoInDisposition(nDispId, rmData)
@@ -826,9 +852,9 @@ Public Module SplitAuto

   Private Function SafeMoveRawPart(nRawId As Integer, ByRef vtMove As Vector3d, dMindist As Double) As Boolean
      ' Spostamento originale
-      Dim vtOriMove As New Vector3d( vtMove)
+      Dim vtOriMove As New Vector3d(vtMove)
      ' Livello di movimento
-      Dim nMoveLevel As Integer = GetPrivateProfileInt( S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
+      Dim nMoveLevel As Integer = GetPrivateProfileInt(S_SPLIT, K_MOVE_LEV, 5, m_MainWindow.GetIniFile())
      Dim nMove As Integer = 1
      ' Se esce dalla tavola, movimento già annullato ed esco con errore
      If Not EgtMoveRawPart(nRawId, vtOriMove) Then Return False
@@ -863,7 +889,7 @@ Public Module SplitAuto
         If VerifyRawWithOtherRaws(nRawId, dMindist) Then
            vtMove += 0.5 * vtOriMove
            nMove += 1
-            If nMoveLevel = nMove Then return True
+            If nMoveLevel = nMove Then Return True
         Else
            EgtMoveRawPart(nRawId, -0.5 * vtOriMove)
         End If
@@ -61,6 +61,9 @@ Public Class SplitPageUC
   ' Abilita la mofica Inizio fine per i tagli interni sugli angoli
   Private m_StartEndModifyOnIntCorner As Boolean = False

+   Private m_IsCtrlKeyDown As Boolean = False
+   Private m_IsShiftKeyDown As Boolean = False
+
   Private Sub SplitPageUC_Initialized(sender As Object, e As EventArgs)
      PrevBtn.IsEnabled = False
      ' Collego lista di oggetti a ListBox
@@ -453,6 +456,24 @@ Public Class SplitPageUC

 #End Region    ' Bridge

+   Private Sub OnMyMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene_DoubleClick
+      If MachiningLsBx.SelectedItems.Count = 1 Then
+         OnMyMouseDownScene(sender, e)
+         Dim x As NameIdLsBxItem = DirectCast(MachiningLsBx.SelectedItems(0), NameIdLsBxItem)
+         Dim nI As Integer = x.Ind
+         If m_MachiningList(nI).m_bEnabled Then
+            m_MachiningList(nI).m_bEnabled = False
+            x.bIsActive = False
+         Else
+            m_MachiningList(nI).m_bEnabled = True
+            x.bIsActive = True
+         End If
+         ColorMachining(m_MachiningList(nI))
+         ColorNumberArrow(nI)
+         EgtDraw()
+      End If
+   End Sub
+
   Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
      ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
      If Not m_bActive OrElse m_bShow Then Return
@@ -595,6 +616,7 @@ Public Class SplitPageUC
         Dim dUsal As Double
         ' ----------------------- REPEAT -----------------------
         Do
+            If Not m_MachiningList(m_nDragInd).m_bCanStartAll Then Exit Do
            dDelta = -dDelta
            ' Leggo il valore salvato nella geometria
            EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
@@ -628,6 +650,7 @@ Public Class SplitPageUC
         Dim dUeal As Double
         dDelta = -dDelta
         Do
+            If Not m_MachiningList(m_nDragInd).m_bCanEndAll Then Exit Do
            dDelta = -dDelta
            ' Leggo il valore salvato nella geometria
            EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
@@ -731,6 +754,24 @@ Public Class SplitPageUC
      EgtDraw()
   End Sub

+   Private Sub MachiningLsBx_MouseDoubleClick(sender As Object, e As MouseEventArgs) Handles MachiningLsBx.MouseDoubleClick
+      If m_IsCtrlKeyDown Or m_IsShiftKeyDown Then Return
+      If MachiningLsBx.SelectedItems.Count = 1 Then
+         Dim x As NameIdLsBxItem = DirectCast(MachiningLsBx.SelectedItems(0), NameIdLsBxItem)
+         Dim nI As Integer = x.Ind
+         If m_MachiningList(nI).m_bEnabled Then
+            m_MachiningList(nI).m_bEnabled = False
+            x.bIsActive = False
+         Else
+            m_MachiningList(nI).m_bEnabled = True
+            x.bIsActive = True
+         End If
+         ColorMachining(m_MachiningList(nI))
+         ColorNumberArrow(nI)
+         EgtDraw()
+      End If
+   End Sub
+
   Private Sub MoveUpBtn_Click(sender As Object, e As RoutedEventArgs) Handles MoveUpBtn.Click
      MoveItem(-1)
   End Sub
@@ -914,11 +955,31 @@ Public Class SplitPageUC
      EnableButtons()
   End Sub

-   ' ERRORE: questo evento non è eseguito!
-   Private Sub OnKeyDownScene(sender As Object, e As KeyEventArgs)
-      If e.Key = Key.Escape Then
-         ' se sono in fase di creazione di un ponticello interrompo
-         DeselectWJBridgesPart()
+   '' DA FARE: quando seleziono Esc devo togliere deselezionare tutte le enità!
+   'Private Sub OnKeyDownScene(sender As Object, e As KeyEventArgs) Handles Me.KeyDown
+   '   If e.Key = Key.Escape Then
+   '      ' se sono in fase di creazione di un ponticello interrompo
+   '      DeselectWJBridgesPart()
+   '      EgtDeselectAll()
+   '      RemoveMarkAndNumbers()
+   '   End If
+   'End Sub
+
+   Private Sub MachiningLsBx_KeyDown(sender As Object, e As KeyEventArgs) Handles MachiningLsBx.KeyDown
+      If e.Key = Key.LeftCtrl Or e.Key = Key.RightCtrl Then
+         m_IsCtrlKeyDown = True
+      End If
+      If e.Key = Key.LeftShift Or e.Key = Key.RightShift Then
+         m_IsShiftKeyDown = True
+      End If
+   End Sub
+
+   Private Sub MachiningLsBx_KeyUp(sender As Object, e As KeyEventArgs) Handles MachiningLsBx.KeyUp
+      If e.Key = Key.LeftCtrl Or e.Key = Key.RightCtrl Then
+         m_IsCtrlKeyDown = False
+      End If
+      If e.Key = Key.LeftShift Or e.Key = Key.RightShift Then
+         m_IsShiftKeyDown = False
      End If
   End Sub

@@ -1125,37 +1186,46 @@ Public Class SplitPageUC
         End If
         Dim nI As Integer = m_ItemList(Index).Ind
         If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
-            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-            Dim nLiPrev As Integer
-            EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
-            If nLiPrev = MCH_SAW_LI.OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
-            ElseIf nLiPrev = MCH_SAW_LI.CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLiPrev = MCH_SAW_LI.EXT_CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
+
+            ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+            If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+               EgtOutLog(" ⚠️ L'ingresso di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+            Else
+
+               EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+               Dim nLiPrev As Integer
+               EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
+               If nLiPrev = MCH_SAW_LI.OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+               ElseIf nLiPrev = MCH_SAW_LI.CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLiPrev = MCH_SAW_LI.EXT_CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadIn(nI, MCH_SAW_LI.OUT)
+               End If
+               ColorMachining(m_MachiningList(nI))
+               ColorNumberArrow(nI)
+               bGenModif = True
+
            End If
-            ColorMachining(m_MachiningList(nI))
-            ColorNumberArrow(nI)
-            bGenModif = True
+
         End If
      Next
      ' Se modificato qualcosa
@@ -1193,24 +1263,33 @@ Public Class SplitPageUC

   Private Sub AllCenStartBtn_Click(sender As Object, e As RoutedEventArgs) Handles AllCenStartBtn.Click
      For nI As Integer = 0 To m_MachiningList.Count() - 1
-         EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-         Dim nLiPrev As Integer
-         EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
-         If nLiPrev = MCH_SAW_LI.OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
-            ' ri-verifico interferenza
-            EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-         ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+
+         ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+         If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+            EgtOutLog(" ⚠️ L'ingresso di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+         Else
+
+            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+            Dim nLiPrev As Integer
+            EgtGetMachiningParam(MCH_MP.LEADINTYPE, nLiPrev)
+            If nLiPrev = MCH_SAW_LI.OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+               ' ri-verifico interferenza
+               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+            ElseIf nLiPrev = MCH_SAW_LI.EXT_OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADINTYPE, MCH_SAW_LI.EXT_CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadIn(nI, MCH_SAW_LI.CENT)
+            End If
+            ColorMachining(m_MachiningList(nI))
+            ColorNumberArrow(nI)
+
         End If
-         ColorMachining(m_MachiningList(nI))
-         ColorNumberArrow(nI)
+
      Next
      EgtDraw()
      ' Imposto flag di modifica
@@ -1226,37 +1305,46 @@ Public Class SplitPageUC
         End If
         Dim nI As Integer = m_ItemList(Index).Ind
         If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
-            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-            Dim nLoPrev As Integer
-            EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
-            If nLoPrev = MCH_SAW_LO.OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
-               ' accorcio
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
-            ElseIf nLoPrev = MCH_SAW_LO.CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
-               ' ri-verifico interferenza
-               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-            ElseIf nLoPrev = MCH_SAW_LO.EXT_CENT Then
-               ' allungo
-               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_OUT)
-               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-               ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
+
+            ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+            If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+               EgtOutLog(" ⚠️ L'uscita di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+            Else
+
+               EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+               Dim nLoPrev As Integer
+               EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
+               If nLoPrev = MCH_SAW_LO.OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
+                  ' accorcio
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+               ElseIf nLoPrev = MCH_SAW_LO.CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
+                  ' ri-verifico interferenza
+                  EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+               ElseIf nLoPrev = MCH_SAW_LO.EXT_CENT Then
+                  ' allungo
+                  EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_OUT)
+                  UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+                  ModifyOtherLeadOut(nI, MCH_SAW_LO.OUT)
+               End If
+               ColorMachining(m_MachiningList(nI))
+               ColorNumberArrow(nI)
+               bGenModif = True
+
            End If
-            ColorMachining(m_MachiningList(nI))
-            ColorNumberArrow(nI)
-            bGenModif = True
+
         End If
      Next
      ' Se modificato qualcosa
@@ -1294,24 +1382,33 @@ Public Class SplitPageUC

   Private Sub AllCenEndBtn_Click(sender As Object, e As RoutedEventArgs) Handles AllCenEndBtn.Click
      For nI As Integer = 0 To m_MachiningList.Count() - 1
-         EgtSetCurrMachining(m_MachiningList(nI).m_nId)
-         Dim nLoPrev As Integer
-         EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
-         If nLoPrev = MCH_SAW_LO.OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
-            ' ri-verifico interferenza
-            EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
-         ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
-            ' accorcio
-            EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
-            ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+
+         ' se ho forzato il tipo di ingresso da CamAuto qui non posso moficarlo!
+         If m_MachiningList(nI).m_bMngLeadInOnIntCorner Then
+            EgtOutLog(" ⚠️ L'uscita di taglio associato all'entita'_" & m_MachiningList(nI).m_nEntId & " non puo' essere modificato per problemi di ingombro lama ⚠️")
+         Else
+
+            EgtSetCurrMachining(m_MachiningList(nI).m_nId)
+            Dim nLoPrev As Integer
+            EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, nLoPrev)
+            If nLoPrev = MCH_SAW_LO.OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+               ' ri-verifico interferenza
+               EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
+            ElseIf nLoPrev = MCH_SAW_LO.EXT_OUT Then
+               ' accorcio
+               EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, MCH_SAW_LO.EXT_CENT)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               ModifyOtherLeadOut(nI, MCH_SAW_LO.CENT)
+            End If
+            ColorMachining(m_MachiningList(nI))
+            ColorNumberArrow(nI)
+
         End If
-         ColorMachining(m_MachiningList(nI))
-         ColorNumberArrow(nI)
+
      Next
      EgtDraw()
      ' Imposto flag di modifica
@@ -1389,6 +1486,12 @@ Public Class SplitPageUC
         ' Se taglio con lama
         If nMachiningType = MCH_MY.SAWING And
            (m_MachiningList(nI).m_bIsLine Or m_MachiningList(nI).m_dPrevAng > FL_ARC_ANG_MIN Or m_MachiningList(nI).m_sLay = NAME_ONPATH) Then
+
+            If Not m_MachiningList(nI).m_bCanStartAll Then
+               EgtOutLog(" ⚠️ Il taglio non puo' essere allungato all'interno del pezzo ⚠️")
+               Return
+            End If
+
            ' leggo il valore salvato nella geometria
            Dim dOrigUsal As Double = 0
            EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
@@ -1564,6 +1667,11 @@ Public Class SplitPageUC
         If nMachiningType = MCH_MY.SAWING And
            (m_MachiningList(nI).m_bIsLine Or m_MachiningList(nI).m_dNextAng > FL_ARC_ANG_MIN Or m_MachiningList(nI).m_sLay = NAME_ONPATH) Then

+            If Not m_MachiningList(nI).m_bCanEndAll Then
+               EgtOutLog(" ⚠️ Il taglio non puo' essere allungato all'interno del pezzo ⚠️")
+               Return
+            End If
+
            Dim dOrigUeal As Double = 0
            EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)

@@ -335,6 +335,7 @@ Module ConstIni
   Public Const K_DC_FLATT_HEADSIDE As String = "FlattHeadSide"
   Public Const K_DC_FLATT_MACHTYPE As String = "FlattMachType"
   Public Const K_DC_FLATT_ROTLOCK As String = "FlattRotLock"
+   Public Const K_DC_FLAT_CHAINEDPATH As String = "ChainedPath"
   Public Const K_DC_FLATT_POSX As String = "FlattPosX"
   Public Const K_DC_FLATT_POSY As String = "FlattPosY"
   Public Const K_DC_POLISH_NAME As String = "PolishName"
@@ -230,6 +230,7 @@
   Public Const K_MACH_MILLING_ON_SINKS As String = "MillingOnSinks"
   Public Const K_MACH_MILLING_SHORTENING As String = "MillingShortening"
   Public Const K_MACH_ENGRAVING_WITHMILL As String = "EngravingWithMill"
+   Public Const K_MACH_STARTCENERTOOLPATH As String = "StartCenterToolPath"
   Public Const K_MACH_ENGRAVING_DEPTH As String = "EngravingDepth"
   Public Const K_MACH_ENGRAVING_WIDTH As String = "EngravingWidth"
   Public Const K_MACH_NEST_ALIGNED As String = "Aligned"
@@ -23,6 +23,9 @@ Public Class ControlsMachineButtonUC
   Friend m_CN As CN_generico
   Private m_bFirst As Boolean = True

+   ' visualizzo l'elenco degli elementi della pagina sono al primo avvio
+   Friend Shared m_OutLogTypeButton As Boolean = True
+
   ' Creazione converter da String a ImageSource
   Dim ImageConverter As New ImageSourceConverter

@@ -76,6 +79,7 @@ Public Class ControlsMachineButtonUC
         For Each MachineButton As MachineButton In m_ButtonList
            GetTypeButton(MachineButton)
         Next
+         m_OutLogTypeButton = False

         NotifyPropertyChanged("ButtonList")
      End If
@@ -87,6 +91,7 @@ Public Class ControlsMachineButtonUC
   '-------------------------------------------------------------------------------

   Friend Sub GetTypeButton(CurrMachineButton As MachineButton)
+      If Not m_OutLogTypeButton Then Return
      Dim BtnType As Type = CurrMachineButton.GetType
      If BtnType Is GetType(NoStateButton) Then
         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(0) ") & " , " & CurrMachineButton.StateFlag)
@@ -7,142 +7,185 @@
   mc:Ignorable="d" 
   d:DesignHeight="597.3" d:DesignWidth="256">

-   <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
-   <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">
+    <!--<Border CornerRadius="{StaticResource Page_CornerRadius}" Background="{DynamicResource OmagCut_LightGray}">-->
+    <Border Style="{DynamicResource OmagCut_DirectCutPageBorder}">

-      <!-- Definizione della Grid FlatteningCut -->
-      <Grid Name="FlatteningCutGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="2*"/>
-            <ColumnDefinition Width="1*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/>
-            <RowDefinition Height="0.5*"/> 
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
+            <!-- Definizione della Grid FlatteningCut -->
+            <Grid Name="FlatteningCutGrid" >
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="2*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="1*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>

-         <Grid Grid.Row="0" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+                <Grid Grid.Row="0" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>

-                <ToggleButton Name="Point1Btn" Grid.Column="0"
+                    <ToggleButton Name="Point1Btn" Grid.Column="0"
               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
+                        <Image Source="{DynamicResource Acquisisci-P1Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </ToggleButton>

-                <ToggleButton Name="Point2Btn" Grid.Column="1"
+                    <ToggleButton Name="Point2Btn" Grid.Column="1"
               Style="{DynamicResource OmagCut_YellowIconToggleButton}">
-                    <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </ToggleButton>
+                        <Image Source="{DynamicResource Acquisisci-P2Img}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </ToggleButton>

-            </Grid>
+                </Grid>

-         <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>

-         <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
+            <ScrollViewer VerticalScrollBarVisibility="Visible" Visibility="Visible"
+                          Grid.Row="1" Grid.RowSpan="11" Grid.ColumnSpan="2">
+
+                <Grid Name="DatiTaglioGrid" >
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="2*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <Grid.RowDefinitions>
+                        <RowDefinition Height="0.1"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="40"/>
+                        <RowDefinition Height="0.1"/>
+                    </Grid.RowDefinitions>
+
+                    <ComboBox Name="PointModeCmBx" Grid.Row="1" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>
+
+                <TextBlock Name="DepthTxBl" Grid.Column="0" Grid.Row="2"
            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="DepthTxBx" Grid.Column="1" Grid.Row="2" Margin="0,0,6,0"
            Style="{StaticResource OmagCut_CalculatorTextBox}"/>

-         <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
+                <TextBlock Name="DirectionTxBl" Grid.Column="0" Grid.Row="3"
            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
+                <EgtWPFLib:EgtTextBox Name="DirectionTxBx" Grid.Column="1" Grid.Row="3" Margin="0,0,6,0" IsLength="False"
            Style="{StaticResource OmagCut_CalculatorTextBox}"/>

-         <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"
+                <TextBlock Name="LenghtTxBl" Grid.Column="0" Grid.Row="4"
            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="LenghtTxBx" Grid.Column="1" Grid.Row="4" Margin="0,0,6,0"
            Style="{StaticResource OmagCut_CalculatorTextBox}"/>

-         <TextBlock Name="WidthTxBl" Grid.Column="0" Grid.Row="5"
+                <TextBlock Name="WidthTxBl" Grid.Column="0" Grid.Row="5"
            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="WidthTxBx" Grid.Column="1" Grid.Row="5" Margin="0,0,6,0"
            Style="{StaticResource OmagCut_CalculatorTextBox}"/>

-         <TextBlock Name="OverlapTxBl" Grid.Column="0" Grid.Row="6"
+                <TextBlock Name="OverlapTxBl" Grid.Column="0" Grid.Row="6"
            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <EgtWPFLib:EgtTextBox Name="OverlapTxBx" Grid.Column="1" Grid.Row="6" Margin="0,0,6,0"
+                <EgtWPFLib:EgtTextBox Name="OverlapTxBx" Grid.Column="1" Grid.Row="6" Margin="0,0,6,0"
            Style="{StaticResource OmagCut_CalculatorTextBox}"/>

-            <TextBlock Name="ZReleasedTxBl" Grid.Column="0" Grid.Row="7"
+                <TextBlock Name="ZReleasedTxBl" Grid.Column="0" Grid.Row="7"
            Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-            <EgtWPFLib:EgtTextBox Name="ZReleasedTxBx" Grid.Column="1" Grid.Row="7" Margin="0,0,6,0"
-            Style="{StaticResource OmagCut_CalculatorTextBox}"/>          
+                <EgtWPFLib:EgtTextBox Name="ZReleasedTxBx" Grid.Column="1" Grid.Row="7" Margin="0,0,6,0"
+            Style="{StaticResource OmagCut_CalculatorTextBox}"/>

-         <TextBlock Name="SideTxBl" Grid.Row="8" Grid.ColumnSpan="2"
+                <TextBlock Name="SideTxBl" Grid.Row="8" Grid.ColumnSpan="2"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="SideChBx" Grid.Row="8" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                <CheckBox Name="SideChBx" Grid.Row="8" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
             HorizontalAlignment="Right" Margin="0,0,6,0"/>

-         <ComboBox Name="TypeCmBx" Grid.Row="9" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
-            <ComboBox.ItemTemplate>
-               <DataTemplate>
-                  <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
-               </DataTemplate>
-            </ComboBox.ItemTemplate>
-         </ComboBox>
+                <ComboBox Name="TypeCmBx" Grid.Row="9" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                    <ComboBox.ItemTemplate>
+                        <DataTemplate>
+                            <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                        </DataTemplate>
+                    </ComboBox.ItemTemplate>
+                </ComboBox>

-         <TextBlock Name="RotLockTxBl" Grid.Row="10" Grid.ColumnSpan="2"
+                <TextBlock Name="RotLockTxBl" Grid.Row="10" Grid.ColumnSpan="2"
             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
-         <CheckBox Name="RotLockChBx" Grid.Row="10" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+                <CheckBox Name="RotLockChBx" Grid.Row="10" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
             HorizontalAlignment="Right" Margin="0,0,6,0"/>

-         <Grid Grid.Row="11" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="0.5*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-            <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-            <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
-               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
-            <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
-               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
-         </Grid>
+                    <TextBlock Name="ChainedPathTxBl" Grid.Row="11" Grid.ColumnSpan="2"
+             Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}"/>
+                    <CheckBox Name="ChainedPathChBx" Grid.Row="11" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_CheckBox_Single}"
+             HorizontalAlignment="Right" Margin="0,0,6,0"/>

-         <Grid Grid.Row="12" Grid.ColumnSpan="2">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
+                    <ComboBox Name="SelToolCmBx" Grid.Row="12" Grid.ColumnSpan="2" Style="{StaticResource OmagCut_ComboBox}" Margin="6,0,6,0">
+                        <ComboBox.ItemTemplate>
+                            <DataTemplate>
+                                <TextBlock Text="{Binding}" Style="{StaticResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                            </DataTemplate>
+                        </ComboBox.ItemTemplate>
+                    </ComboBox>
+
+                    <Grid Grid.Row="13" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="0.5*"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="0.5*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+                    <TextBlock Name="XcoordTxBl" Grid.Column="0" Text="X"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                    <EgtWPFLib:EgtTextBox Name="XcoordTxBx" Grid.Column="1" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                    <TextBlock Name="YcoordTxBl" Grid.Column="2" Text="Y"
+               Style="{StaticResource OmagCut_CurrProjSummeryTextBlock}" HorizontalAlignment="Center"/>
+                    <EgtWPFLib:EgtTextBox Name="YcoordTxBx" Grid.Column="3" Margin="0,0,6,0"
+               Style="{StaticResource OmagCut_CalculatorTextBox}"/>
+                </Grid>
+
+                </Grid>    
+            </ScrollViewer>
+
+            <Grid Grid.Row="12" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+
+                    <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                    <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                    <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
+                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                    </Button>
+                </Grid>

-                <Button Name="SimulBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource SimulaImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-                <Button Name="OkBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource EseguiImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
-                <Button Name="ExitBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowIconButton}">
-                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-                </Button>
            </Grid>
-
-      </Grid>
-
-   </Border>
+        
+    </Border>

 </UserControl>
@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.Reflection
+Imports EgtUILib
 Imports EgtUILib.EgtInterface

 Public Class FlatteningCut
@@ -36,6 +37,8 @@ Public Class FlatteningCut
   Private m_bHeadSide As Boolean = False
   Private m_nMachType As Integer = 1
   Private m_bRotLock As Boolean = False
+   Private m_bChainedPath As Boolean = True
+   Private m_nTool As Integer = 0
   ' Array delle modalità di acquisizione dei punti
   Private m_PointsModeArray(2) As String
   ' Array delle tipologia di lavorazione della spianatura
@@ -44,6 +47,8 @@ Public Class FlatteningCut
   Private m_ptPrev As Point3d
   ' Layer per crocette temporanee
   Private m_nTempLay As Integer = GDB_ID.NULL
+   ' Array degliutensili disponibili (lama e fresa)
+   Private m_ToolsArray(1) As String

   ' Costanti
   Private Const MAX_TAB_DEPTH As Double = 10.0
@@ -68,6 +73,11 @@ Public Class FlatteningCut
      Right
   End Enum

+   Private Enum TOOL As Integer
+      SAW = 0
+      MILL = 1
+   End Enum
+
   ' Per abilitare la spianatura con la FRESA deve essere imposatato a TRUE il flag "Usa Fresa" nella pagina MACCHINA (campo INCISIONI)
   Private Sub FlatteningCut_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
      ' Creo lista modalità di acquisizione punto 
@@ -93,8 +103,13 @@ Public Class FlatteningCut
      ZReleasedTxBl.Text = "Z Svincolo"
      SideTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 23)
      RotLockTxBl.Text = EgtMsg(MSG_DIRECTCUTPAGEUC + 29)
+      ChainedPathTxBl.Text = "Chained path"
      SimulBtn.ToolTip = EgtMsg(MSG_CADCUTPAGEUC + 1)
      OkBtn.ToolTip = EgtMsg(MSG_DIRECTCUTPAGEUC + 30)
+      ' tipo di utensile in uso per la lavorazione
+      m_ToolsArray(TOOL.SAW) = EgtMsg(MSG_DIRECTCUTPAGEUC + 24)
+      m_ToolsArray(TOOL.MILL) = "Mill"
+      SelToolCmBx.ItemsSource = m_ToolsArray
      ' Carico i dati dell'ultimo taglio
      m_dDepth = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_DEPTH, m_dDepth, m_MainWindow.GetIniFile())
      m_dAngO = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_ANGH, m_dAngO, m_MainWindow.GetIniFile())
@@ -105,6 +120,8 @@ Public Class FlatteningCut
      m_bHeadSide = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_HEADSIDE, 0, m_MainWindow.GetIniFile()) <> 0)
      m_nMachType = GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_MACHTYPE, m_nMachType, m_MainWindow.GetIniFile())
      m_bRotLock = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLATT_ROTLOCK, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_bChainedPath = (GetPrivateProfileInt(S_DIRECTCUTS, K_DC_FLAT_CHAINEDPATH, 0, m_MainWindow.GetIniFile()) <> 0)
+      m_nTool = GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile())
      m_ptTipP1.x = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_POSX, m_ptTipP1.x, m_MainWindow.GetIniFile())
      m_ptTipP1.y = GetPrivateProfileDouble(S_DIRECTCUTS, K_DC_FLATT_POSY, m_ptTipP1.y, m_MainWindow.GetIniFile())
   End Sub
@@ -166,6 +183,9 @@ Public Class FlatteningCut
      SideChBx.IsChecked = m_bHeadSide
      TypeCmBx.SelectedIndex = m_nMachType
      RotLockChBx.IsChecked = m_bRotLock
+      ChainedPathChBx.IsChecked = m_bChainedPath
+      ' Assegno l'utensile in definito in macchina per la fresatura
+      SelToolCmBx.SelectedIndex = m_nTool
      ' Reset taglio e disabilito bottone esecuzione
      m_bCutOk = False
      UpdateSimulOkBtn()
@@ -549,6 +569,16 @@ Public Class FlatteningCut
      EgtDraw()
   End Sub

+   Private Sub SelToolCmBx_SelectionChanged(sender As Object, e As EventArgs) Handles SelToolCmBx.SelectionChanged
+      m_nTool = SelToolCmBx.SelectedIndex
+      ' Disabilito il concatenamento
+      ChainedPathChBx.IsEnabled = (m_nTool = TOOL.MILL)
+      ' Disegno il taglio
+      CreateFlatteningCut()
+      SetMachineInCurrPos()
+      EgtDraw()
+   End Sub
+
   Private Sub RotLockChBx_Click(sender As Object, e As EventArgs) Handles RotLockChBx.Click
      m_bRotLock = RotLockChBx.IsChecked
      ' Disegno il taglio
@@ -557,6 +587,14 @@ Public Class FlatteningCut
      EgtDraw()
   End Sub

+   Private Sub ChainedPathChBx_Click(sender As Object, e As EventArgs) Handles ChainedPathChBx.Click
+      m_bChainedPath = ChainedPathChBx.IsChecked
+      ' Disegno il taglio
+      CreateFlatteningCut()
+      SetMachineInCurrPos()
+      EgtDraw()
+   End Sub
+
   Private Sub XcoordTxBx_EgtClosed(sender As Object, e As EventArgs) Handles XcoordTxBx.EgtClosed
      ' Recupero il valore della coordinata (in 0 Tab)
      Dim dXcoord As Double = 0
@@ -647,10 +685,12 @@ Public Class FlatteningCut
   ' ricavo l'ingombro di lavorazione in funzione dell'utensile selezionato
   Private Function GetFootPrintTool() As Double
      ' vedere nella pagina Allarm il capito "Incisioni"
-      Dim bForceUseMill As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0)
+      Dim bForceUseMill As Boolean = (m_nTool = TOOL.MILL)
      Dim dFootPrint As Double = 0
      ' verifico quale lavorazione è attiva
      If Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrSawing) AndAlso Not bForceUseMill Then
+         Dim bSetTool As Boolean = EgtTdbSetCurrTool(m_MainWindow.m_CurrentMachine.sCurrSaw)
+         If Not bSetTool Then EgtOutLog("Erro nel settaggio utensile lama " & m_MainWindow.m_CurrentMachine.sCurrSaw)
         EgtTdbGetCurrToolParam(MCH_TP.THICK, dFootPrint)
      ElseIf Not String.IsNullOrEmpty(m_MainWindow.m_CurrentMachine.sCurrMilling) Then
         Dim sCurrMill = m_MainWindow.m_CurrentMachine.sCurrMill
@@ -688,12 +728,16 @@ Public Class FlatteningCut
      EgtSetInfo(nCutId, INFO_DIRECTCUT, 1)
      ' Imposto affondamento e angolo di fianco sul taglio
      EgtSetInfo(nCutId, INFO_DEPTH, m_dDepth)
-      If (GetPrivateProfileInt(S_MACH_NEST, K_MACH_ENGRAVING_WITHMILL, 1, m_MainWindow.GetMachIniFile()) <> 0) Then
+      If (m_nTool = TOOL.MILL) Then
         EgtSetInfo(nCutId, INFO_WIDTH, GetFootPrintTool)
      End If
      EgtSetInfo(nCutId, INFO_SIDE_ANGLE, 0)
      ' Imposto prima direzione
      EgtSetInfo(nCutId, INFO_DIR, 1)
+      ' Imposto se iniziare la fresatura dal punto indicato
+      Dim bReducePath As Boolean = Not GetPrivateProfileInt(S_MACH_NEST, K_MACH_STARTCENERTOOLPATH, 0, m_MainWindow.GetMachIniFile()) <> 0
+      If Not bReducePath Then EgtSetInfo(nCutId, INFO_STRICT, 0)
+
      ' Eventuale bloccaggio rotazione asse C tra le passate
      If RotLockChBx.IsChecked Then
         EgtSetInfo(nCutId, INFO_ENABLE_INVERT, False)
@@ -731,10 +775,17 @@ Public Class FlatteningCut
   End Function

   Private Function MultiplyCut(nLayerId As Integer, nCutId As Integer) As Boolean
+      Dim bEngWithMill As Boolean = (m_nTool = TOOL.MILL)
+      Dim bReducePath As Boolean = Not GetPrivateProfileInt(S_MACH_NEST, K_MACH_STARTCENERTOOLPATH, 0, m_MainWindow.GetMachIniFile()) <> 0
+
      ' Recupero spessore della lama (utensile) correntemente attiva
      Dim dThick As Double = GetFootPrintTool()
      If dThick = 0 Then Return False

+      ' Salvo la prima curva nella lista dei percorsi da concatenare
+      Dim CutsList As New List(Of Integer)
+      CutsList.Add(nCutId)
+
      ' Imposto angolo di rotazione a seconda del lato dei tagli
      Dim dRotAngO As Double = If(SideChBx.IsChecked(), -90, 90)
      ' Definisco vettore di spostamento
@@ -752,7 +803,10 @@ Public Class FlatteningCut
      If nStepNum > 1 Then
         dDelta = dWidth / (nStepNum - 1)
      End If
+      ' definisco la larghezza dell'utensile (solo per la fresa)
      EgtSetInfo(nCutId, INFO_WIDTH, dThick)
+      ' definisco il tipo di utensile da utilizzare
+      EgtSetInfo(nCutId, "EngravingWithMill", m_nTool)
      ' Creo vettore delta
      vtDelta *= dDelta
      ' Creo indice per impostare info che indica tipologia di spianatura
@@ -762,6 +816,7 @@ Public Class FlatteningCut
         ' Creo copie
         Dim nCut2Id = EgtCopyGlob(nCutId, nLayerId)
         EgtSetInfo(nCut2Id, INFO_WIDTH, dThick)
+         EgtSetInfo(nCutId, "EngravingWithMill", m_nTool)
         ' Assegno info direzione a seconda del tipo di spianatura
         If TypeCmBx.SelectedIndex = MACH_TYPE.ZIGZAG Then
            If nTypeIndex = 1 Then
@@ -775,10 +830,77 @@ Public Class FlatteningCut
            EgtSetInfo(nCut2Id, INFO_DIR, 1)
         End If
         EgtMove(nCut2Id, vtPerpMove, GDB_RT.GLOB)
+
+         ' ----------------------- CREO SEGMENTI PER CONCATENAMENTO CURVE -----------------------
+         If m_bChainedPath And bEngWithMill Then
+            If bReducePath Then
+               If Index < nStepNum - 1 Then
+                  ExtendLenghtMillPath(nCut2Id, -dThick / 2)
+               ElseIf Index = nStepNum - 1 Then
+                  If nStepNum Mod 2 = 0 Then
+                     ExtendLenghtMillPath(nCut2Id, -dThick / 2, False, True)
+                  Else
+                     ExtendLenghtMillPath(nCut2Id, -dThick / 2, True, False)
+                  End If
+               End If
+            End If
+               CutsList.Add(nCut2Id)
+            End If
+         ' ----------------------- CREO SEGMENTI PER CONCATENAMENTO CURVE -----------------------
+
      Next
+
+      ' ----------------------- CREO UN UNICO PERCORSO CONCATENATO -----------------------
+      If m_bChainedPath And bEngWithMill Then
+         ' Decidere se accorciare i tagli del valore del raggio utensile!
+         If bReducePath Then
+            ExtendLenghtMillPath(CutsList(0), -dThick / 2, False, True)
+         End If
+         For Index As Integer = 0 To CutsList.Count - 2
+            If Index Mod 2 <> 0 Then
+               ' Costruisco la linea di collegamento tra due curve adiacenti
+               Dim PtStart_1 As Point3d
+               EgtStartPoint(CutsList(Index), GDB_RT.GLOB, PtStart_1)
+               Dim PtStart_2 As Point3d
+               EgtStartPoint(CutsList(Index + 1), GDB_RT.GLOB, PtStart_2)
+               CutsList.Add(EgtCreateLine(nLayerId, PtStart_1, PtStart_2))
+            Else
+               ' Costruisco la linea di collegamento tra due curve adiacenti
+               Dim PtStart_1 As Point3d
+               EgtEndPoint(CutsList(Index), GDB_RT.GLOB, PtStart_1)
+               Dim PtStart_2 As Point3d
+               EgtEndPoint(CutsList(Index + 1), GDB_RT.GLOB, PtStart_2)
+               CutsList.Add(EgtCreateLine(nLayerId, PtStart_1, PtStart_2))
+            End If
+         Next
+         Dim ptNear As Point3d
+         EgtStartPoint(CutsList(0), ptNear)
+         Dim IdJointCurv As Integer = EgtCreateCurveCompoByChain(nLayerId, CutsList.ToArray, ptNear, True)
+         EgtSetInfo(IdJointCurv, INFO_DIRECTCUT, 1)
+         EgtSetInfo(IdJointCurv, INFO_STEP_TYPE, m_nMachType)
+         EgtSetInfo(IdJointCurv, INFO_WIDTH, dThick)
+         ' Se unisco il percorso devo per forza usare la fresa!
+         EgtSetInfo(IdJointCurv, "EngravingWithMill", 1)
+         If Not bReducePath Then EgtSetInfo(IdJointCurv, INFO_STRICT, 0)
+      End If
+      ' ----------------------- CREO UN UNICO PERCORSO CONCATENATO -----------------------
+
      Return True
   End Function

+   Private Sub ExtendLenghtMillPath(ByVal IdCurv As Integer, ByVal ReduceVal As Double,
+                                    ByVal Optional bStart As Boolean = True, ByVal Optional bEnd As Boolean = True)
+      Dim PtStart As Point3d
+      EgtStartPoint(IdCurv, GDB_RT.GLOB, PtStart)
+      Dim PtEnd As Point3d
+      EgtEndPoint(IdCurv, GDB_RT.GLOB, PtEnd)
+      If bStart Then EgtTrimExtendCurveByLen(IdCurv, ReduceVal, PtStart, GDB_RT.GLOB)
+      If bEnd Then EgtTrimExtendCurveByLen(IdCurv, ReduceVal, PtEnd, GDB_RT.GLOB)
+      Dim dLenLine As Double
+      EgtCurveLength(IdCurv, dLenLine)
+      EgtOutLog("Lunghezza segmento ridotto: " & dLenLine.ToString)
+   End Sub
+
   Private Function CreateCross(nLayerId As Integer, ptP As Point3d) As Boolean
      ' Aggiungo crocette
      Dim vtCrossX As New Vector3d(20, 0, 0)
@@ -22,6 +22,9 @@ Public Class VacuumMachineButtonUC
   Friend m_CN As CN_generico
   Private m_bFirst As Boolean = True

+   ' visualizzo l'elenco degli elementi della pagina sono al primo avvio
+   Friend m_OutLogTypeButton As Boolean = True
+
   ' Creazione converter da String a ImageSource
   Dim ImageConverter As New ImageSourceConverter

@@ -73,8 +76,9 @@ Public Class VacuumMachineButtonUC
         End While

         For Each MachineButton As MachineButton In m_ButtonList
-            GetTypeButton(MachineButton)
+            OutLogTypeButton(MachineButton)
         Next
+         m_OutLogTypeButton = False

         NotifyPropertyChanged("ButtonList")
      End If
@@ -85,7 +89,8 @@ Public Class VacuumMachineButtonUC
   ' i segeunti metodi notificano il cambiamento di stato di specifici bottoni
   '-------------------------------------------------------------------------------

-   Friend Sub GetTypeButton(CurrMachineButton As MachineButton)
+   Friend Sub OutLogTypeButton(CurrMachineButton As MachineButton)
+      If Not m_OutLogTypeButton Then Return
      Dim BtnType As Type = CurrMachineButton.GetType
      If BtnType Is GetType(NoStateButton) Then
         EgtOutLog(" ► " & BtnType.ToString.Replace("OmagCUT.", "(0) ") & " , " & CurrMachineButton.StateFlag)
@@ -7,55 +7,57 @@
   mc:Ignorable="d" 
   d:DesignHeight="853.3" d:DesignWidth="1280" Initialized="ImportPage_Initialized" Loaded="ImportPage_Loaded" Unloaded="ImportPage_Unloaded">

-   <!-- Definizione della ImportPage -->
-   <Border>
-      <Grid Name="ImportPageGrid" >
-         <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="3*"/>
-            <ColumnDefinition Width="12*"/>
-         </Grid.ColumnDefinitions>
-         <Grid.RowDefinitions>
-            <RowDefinition Height="1*"/>
-            <RowDefinition Height="8*"/>
-            <RowDefinition Height="1*"/>
-         </Grid.RowDefinitions>
-
-         
-         <!-- Definizione della Grid superiore per Button -->
-         <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
+    <!-- Definizione della ImportPage -->
+    <Border>
+        <Grid Name="ImportPageGrid" >
            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="7*"/>
+                <ColumnDefinition Width="3*"/>
+                <ColumnDefinition Width="12*"/>
            </Grid.ColumnDefinitions>
-
-            <ToggleButton Name="SideAngleBtn" Grid.Column="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="FiloTopBtn" Grid.Column="1"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="DripCutBtn" Grid.Column="2" Padding="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <ToggleButton Name="DripDrillBtn" Grid.Column="3" Padding="0"
-               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
-            <Button Name="Cad2dBtn" Grid.Column="4" Padding="0"
-               Style="{DynamicResource OmagCut_YellowTextButton}"/>
-         </Grid>
-
-         <!-- Definizione della Grid laterale -->
-         <Grid Name="LeftGrid" Grid.RowSpan="3">
            <Grid.RowDefinitions>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="0.5*"/>
-               <RowDefinition Height="7.25*"/>
-               <RowDefinition Height="0.75*"/>
-               <RowDefinition Height="1*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="8*"/>
+                <RowDefinition Height="1*"/>
            </Grid.RowDefinitions>

-            <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
+
+            <!-- Definizione della Grid superiore per Button -->
+            <Grid Name="UpperButtonGrid" Grid.Column="1" Grid.Row="0" >
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="7*"/>
+                </Grid.ColumnDefinitions>
+
+                <ToggleButton Name="SideAngleBtn" Grid.Column="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="FiloTopBtn" Grid.Column="1"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="DripCutBtn" Grid.Column="2" Padding="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="EngraveBtn" Grid.Column="2"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <ToggleButton Name="DripDrillBtn" Grid.Column="3" Padding="0"
+               Style="{DynamicResource OmagCut_RightGrayYellowTextToggleButton}"/>
+                <Button Name="Cad2dBtn" Grid.Column="4" Padding="0"
+               Style="{DynamicResource OmagCut_YellowTextButton}"/>
+            </Grid>
+
+            <!-- Definizione della Grid laterale -->
+            <Grid Name="LeftGrid" Grid.RowSpan="3">
+                <Grid.RowDefinitions>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="0.5*"/>
+                    <RowDefinition Height="7.25*"/>
+                    <RowDefinition Height="0.75*"/>
+                    <RowDefinition Height="1*"/>
+                </Grid.RowDefinitions>
+
+                <TextBlock Name="FilePathTxBl" Foreground="White" Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
+                <ListBox Name="FileListBox" Grid.Row="1" Grid.RowSpan="2" ItemTemplate="{DynamicResource DataTemplateItem}"
                     ItemsSource="{Binding ItemList}"/>

                <Grid Name="FinderGrd"  Grid.Row="3" Margin="0,0,8,0">
@@ -68,68 +70,68 @@
                    <Button Name="ClearFindBtn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Margin="0,6,2,6">
                        <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}" Width="30" />
                    </Button>
-                </Grid> 
-            
-            <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
-               <TextBlock Name="MessageTxBx" TextAlignment="Center"
+                </Grid>
+
+                <Border Name="MessageBrd" Grid.Row="5" BorderThickness="0,1,0,0" BorderBrush="Gray">
+                    <TextBlock Name="MessageTxBx" TextAlignment="Center"
                   Style="{DynamicResource OmagCut_LowerCaseCharacterTextBlock}"/>
-            </Border>
+                </Border>

-         </Grid>
-
-         <!-- Definizione della Grid inferiore per Button -->
-         <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
-            <Grid.ColumnDefinitions>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-               <ColumnDefinition Width="1*"/>
-            </Grid.ColumnDefinitions>
-
-            <Button Name="UseLayerBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="UseClosedCurveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="UseRegionBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-            <Button Name="ResetBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-            <RadioButton Name="mmBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
-            <RadioButton Name="inchBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
-
-            <Button Name="OrderListBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}"/>
-
-            <ToggleButton Name="TopBtn" Grid.Column="7" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
-
-            <Grid Name="PartNumberGrd" Grid.Column="8" Grid.ColumnSpan="2">
-               <Grid.ColumnDefinitions>
-                  <ColumnDefinition Width="1*"/>
-                  <ColumnDefinition Width="1*"/>
-               </Grid.ColumnDefinitions>
-
-               <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
-                  TextAlignment="Right"/>
-               <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
-                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
            </Grid>

-            <Button Name="OkBtn" Grid.Column="10" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
+            <!-- Definizione della Grid inferiore per Button -->
+            <Grid Name="LowerButtonGrid" Grid.Column="1" Grid.Row="3">
+                <Grid.ColumnDefinitions>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="1*"/>
+                </Grid.ColumnDefinitions>
+
+                <Button Name="UseLayerBtn" Grid.Column="0" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="UseClosedCurveBtn" Grid.Column="1" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="UseRegionBtn" Grid.Column="2" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+                <Button Name="ResetBtn" Grid.Column="3" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+                <RadioButton Name="mmBtn" Grid.Column="4" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
+                <RadioButton Name="inchBtn" Grid.Column="5" Style="{DynamicResource OmagCut_YellowToggleButton}"/>
+
+                <Button Name="OrderListBtn" Grid.Column="6" Style="{DynamicResource OmagCut_YellowTextButton}"/>
+
+                <ToggleButton Name="TopBtn" Grid.Column="7" Style="{DynamicResource  OmagCut_YellowToggleButton}"/>
+
+                <Grid Name="PartNumberGrd" Grid.Column="8" Grid.ColumnSpan="2">
+                    <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="1*"/>
+                    </Grid.ColumnDefinitions>
+
+                    <TextBlock Name="PartNumTxBl" Grid.Column="0" Style="{DynamicResource OmagCut_CurrProjSummeryTextBlock}"
+                  TextAlignment="Right"/>
+                    <EgtWPFLib:EgtTextBox Name="PartNumTxBx" Grid.Column="1" Width="60" IsLength="False"
+                  Style="{DynamicResource OmagCut_CalculatorTextBox}"/>
+                </Grid>
+
+                <Button Name="OkBtn" Grid.Column="10" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+                <Button Name="ExitBtn" Grid.Column="11" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>

-            <Button Name="ExitBtn" Grid.Column="11" Style="{DynamicResource OmagCut_GradientBlueIconButton}">
-               <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
-            </Button>
-            
-         </Grid>
-         
-      </Grid>
-      
-   </Border>
-   
 </UserControl>
@@ -88,6 +88,7 @@ Public Class ImportPageUC
      SideAngleBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 7)             'Inclina lati
      FiloTopBtn.Content = EgtMsg( 90400)                             'Filo Top
      DripCutBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 8)               'Incidi da sotto
+      EngraveBtn.Content = "Engrave"
      DripDrillBtn.Content = EgtMsg(MSG_IMPORTPAGEUC + 14)            'Foro da sotto
      Cad2dBtn.Content = "Cad 2d"

@@ -163,6 +164,10 @@ Public Class ImportPageUC

      ' Pulisco tutto
      ClearView()
+      ' Definizione di quale comando deve essere visualizzato
+      DripCutBtn.Visibility = If(String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw), Visibility.Hidden, Visibility.Visible)
+      EngraveBtn.Visibility = If(DripCutBtn.Visibility <> Visibility.Visible, Visibility.Visible, Visibility.Hidden)
+
      FileListBox.UnselectAll()
      ' inibisco selezione diretta da Scene
      ImportScene.SetStatusNull()
@@ -343,7 +348,12 @@ Public Class ImportPageUC
      ResetBtn.IsEnabled = False
      SideAngleBtn.IsEnabled = False
      FiloTopBtn.IsEnabled = False
-      DripCutBtn.IsEnabled = False
+      ' Evito di settare le proprietà di oggeti che sono con visibilità Hidden
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = False
+      Else
+         EngraveBtn.IsEnabled = False
+      End If
      DripDrillBtn.IsEnabled = False
      Return True
   End Function
@@ -404,7 +414,11 @@ Public Class ImportPageUC
            OkBtn.IsEnabled = False
            SideAngleBtn.IsEnabled = False
            FiloTopBtn.IsEnabled = False
-            DripCutBtn.IsEnabled = False
+            If DripCutBtn.Visibility = Visibility.Visible Then
+               DripCutBtn.IsEnabled = False
+            Else
+               EngraveBtn.IsEnabled = False
+            End If
            DripDrillBtn.IsEnabled = False
         ElseIf m_nFileType = FT_TRF Or m_nFileType = FT_CUT Then
            ' abilito bottone Insert, disabilito bottoni UseLayer, UseClosedCurve, UseRegion e Reset
@@ -420,7 +434,11 @@ Public Class ImportPageUC
            OkBtn.IsEnabled = True
            SideAngleBtn.IsEnabled = False
            FiloTopBtn.IsEnabled = False
-            DripCutBtn.IsEnabled = False
+            If DripCutBtn.Visibility = Visibility.Visible Then
+               DripCutBtn.IsEnabled = False
+            Else
+               EngraveBtn.IsEnabled = False
+            End If
            DripDrillBtn.IsEnabled = False
         End If
         ' altrimenti import per cornici
@@ -433,10 +451,10 @@ Public Class ImportPageUC
   End Function

   Private Sub OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles ImportScene.OnMouseDownScene
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
-         OnMouseDownSceneSideAngle( e)
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked Then
+         OnMouseDownSceneSideAngle(e)
      ElseIf DripDrillBtn.IsChecked() Then
-         OnMouseDownSceneUnderDrill( e)
+         OnMouseDownSceneUnderDrill(e)
      ElseIf FiloTopBtn.IsChecked() Then
         OnMouseDownSceneFiloTop( e)
      End If
@@ -619,7 +637,7 @@ Public Class ImportPageUC

   Private Sub SelectedPartChanged()
      ' Se sono in modalità inclinazioni o gocciolatoio calcolo lati inclinabili e creo testi
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked() Then
         m_SideAngleUC.ReLoadSideAnglePage()
      End If
   End Sub
@@ -680,8 +698,12 @@ Public Class ImportPageUC
      ' abilito bottone angoli su lati esterni
      SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
      FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                             Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
      DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                               Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
   End Sub
@@ -712,8 +734,12 @@ Public Class ImportPageUC
      ' abilito bottone angoli su lati esterni
      SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
      FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                             Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
      DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                               Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
   End Sub
@@ -744,8 +770,12 @@ Public Class ImportPageUC
      ' abilito bottone angoli su lati esterni
      SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
      FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-      DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+      If DripCutBtn.Visibility = Visibility.Visible Then
+         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                             Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+      Else
+         EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+      End If
      DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                               Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
   End Sub
@@ -1029,22 +1059,24 @@ Public Class ImportPageUC
      ' Salvo direttorio corrente
      WritePrivateProfileString(S_FLATPARTS, K_FLPCURRDIR, m_sCurrDir, m_MainWindow.GetIniFile())
      ' Tolgo pagina inclinazioni/gocciolatoi se attiva
-      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Then
+      If SideAngleBtn.IsChecked() Or DripCutBtn.IsChecked() Or EngraveBtn.IsChecked() Then
         FilePathTxBl.Visibility = Windows.Visibility.Visible
         FileListBox.Visibility = Windows.Visibility.Visible
         LeftGrid.Children.Remove(m_SideAngleUC)
         If SideAngleBtn.IsChecked() Then
            SideAngleBtn.IsChecked = False
+         ElseIf EngraveBtn.IsChecked() Then
+            EngraveBtn.IsChecked = False
         Else
            DripCutBtn.IsChecked() = False
         End If
-      ' Tolgo pagina fori da sotto se attiva
+         ' Tolgo pagina fori da sotto se attiva
      ElseIf DripDrillBtn.IsChecked() Then
         FilePathTxBl.Visibility = Windows.Visibility.Visible
         FileListBox.Visibility = Windows.Visibility.Visible
         LeftGrid.Children.Remove(m_UnderDrillUC)
         DripDrillBtn.IsChecked() = False
-      ' Tolgo pagina Filo Top se attiva
+         ' Tolgo pagina Filo Top se attiva
      ElseIf FiloTopBtn.IsChecked() Then
         FilePathTxBl.Visibility = Windows.Visibility.Visible
         FileListBox.Visibility = Windows.Visibility.Visible
@@ -1071,7 +1103,11 @@ Public Class ImportPageUC
         FileListBox.Visibility = Windows.Visibility.Hidden
         ' Disabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
         FiloTopBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
         DripDrillBtn.IsEnabled = False
         mmBtn.IsEnabled = False
         inchBtn.IsEnabled = False
@@ -1093,8 +1129,72 @@ Public Class ImportPageUC
         EgtDeselectAll()
         ' Riabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
         FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
+         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
+         mmBtn.IsEnabled = True
+         inchBtn.IsEnabled = True
+         ' Elimino scritte angoli per input e inserisco quelle definitive
+         SideAngle.WriteSideAngleForNest(ImportScene.GetCtx())
+         ' Riabilito bottone reset
+         ResetBtn.IsEnabled = True
+         ' Pulisco area messaggi
+         MessageTxBx.Text = ""
+         MessageBrd.Background = Brushes.Transparent
+      End If
+      EgtZoom(ZM.ALL)
+   End Sub
+
+   Private Sub EngraveBtn_Click(sender As Object, e As RoutedEventArgs) Handles EngraveBtn.Click
+      If EngraveBtn.IsChecked() Then
+         FinderGrd.Visibility = Visibility.Hidden
+         ' Aggiungo regioni per percorsi interni
+         AdjustSelectRegions()
+         ' Dichiaro nessuna selezione
+         m_nSelectedPart = GDB_ID.NULL
+         m_nSelectedLayer = GDB_ID.NULL
+         ' Imposto modalità sideangle
+         m_SideAngleUC.m_Mode = SideAngleUC.ModeOpt.ENGRAVE
+         LeftGrid.Children.Add(m_SideAngleUC)
+         FilePathTxBl.Visibility = Windows.Visibility.Hidden
+         FileListBox.Visibility = Windows.Visibility.Hidden
+         ' Disabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
+         SideAngleBtn.IsEnabled = False
+         FiloTopBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         End If
+         DripDrillBtn.IsEnabled = False
+         mmBtn.IsEnabled = False
+         inchBtn.IsEnabled = False
+         ' Disabilito bottone reset
+         ResetBtn.IsEnabled = False
+         ' Messaggio di selezione da effettuare
+         MessageTxBx.Text = EgtMsg(MSG_DRAWPAGEUC + 6)   ' Selezionare un contorno
+         MessageBrd.Background = Application.Current.FindResource("OmagCut_Green")
+      Else
+         FinderGrd.Visibility = Visibility.Visible
+         ' Rimuovo regioni per percorsi interni
+         RemoveSelectRegions()
+         FilePathTxBl.Visibility = Windows.Visibility.Visible
+         FileListBox.Visibility = Windows.Visibility.Visible
+         LeftGrid.Children.Remove(m_SideAngleUC)
+         ' Deseleziono eventuali pezzi rimasti selezionati
+         m_nSelectedPart = GDB_ID.NULL
+         m_nSelectedLayer = GDB_ID.NULL
+         EgtDeselectAll()
+         ' Riabilito FiloTopBtn, DripCutBtn, DripDrillBtn e unità di misura
+         FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
+         SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         End If
         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
         mmBtn.IsEnabled = True
@@ -1124,6 +1224,9 @@ Public Class ImportPageUC
         ' Disabilito SideAngleBtn,FiloTop,  DripDrillBtn e unità di misura
         SideAngleBtn.IsEnabled = False
         FiloTopBtn.IsEnabled = False
+         If DripCutBtn.Visibility <> Visibility.Visible Then
+            EngraveBtn.IsEnabled = False
+         End If
         DripDrillBtn.IsEnabled = False
         mmBtn.IsEnabled = False
         inchBtn.IsEnabled = False
@@ -1144,8 +1247,9 @@ Public Class ImportPageUC
         ' Riabilito SideAngleBtn, FiloTop, DripDrillBtn e unità di misura
         SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
         FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
-                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
+         If DripCutBtn.Visibility <> Visibility.Visible Then
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
         mmBtn.IsEnabled = True
         inchBtn.IsEnabled = True
         ' Elimino scritte angoli per input e inserisco quelle definitive
@@ -1174,7 +1278,11 @@ Public Class ImportPageUC
         ' Disabilito SideAngleBtn, FiloTop, DripCutBtn e unità di misura
         SideAngleBtn.IsEnabled = False
         FiloTopBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
         mmBtn.IsEnabled = False
         inchBtn.IsEnabled = False
         ' Disabilito bottone reset
@@ -1196,8 +1304,12 @@ Public Class ImportPageUC
         ' Riabilito SideAngleBtn, FiloTop, DripCutBtn e unità di misura
         SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
         FiloTopBtn.IsEnabled = m_MainWindow.m_CurrentMachine.bMilling
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
         mmBtn.IsEnabled = True
         inchBtn.IsEnabled = True
         ' Riabilito bottone reset
@@ -1223,7 +1335,11 @@ Public Class ImportPageUC
         FileListBox.Visibility = Windows.Visibility.Hidden
         ' Disabilito SideAngleBtn, DripCutBtn, DripDrillBtn e unità di misura
         SideAngleBtn.IsEnabled = False
-         DripCutBtn.IsEnabled = False
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = False
+         Else
+            EngraveBtn.IsEnabled = False
+         End If
         DripDrillBtn.IsEnabled = False
         mmBtn.IsEnabled = False
         inchBtn.IsEnabled = False
@@ -1245,8 +1361,12 @@ Public Class ImportPageUC
         EgtDeselectAll()
         ' Riabilito SideAngleBtn, DripCutBtn, DripDrillBtn e unità di misura
         SideAngleBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
-         DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
+         If DripCutBtn.Visibility = Visibility.Visible Then
+            DripCutBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripSaw)
+         Else
+            EngraveBtn.IsEnabled = m_MainWindow.m_DrawPageUC.bEnableSideAngle
+         End If
         DripDrillBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.UNDER_CUT) And
                                  Not String.IsNullOrWhiteSpace(m_MainWindow.m_CurrentMachine.sCurrDripDrill)
         mmBtn.IsEnabled = True
@@ -61,7 +61,7 @@ Public Class MachiningDbPageUC
      StepType = {EgtMsg(MSG_COMBOBOXPARAM + 38), EgtMsg(MSG_COMBOBOXPARAM + 39), EgtMsg(MSG_COMBOBOXPARAM + 40)}
      RouFinStepType = {EgtMsg(MSG_COMBOBOXPARAM + 38), EgtMsg(MSG_COMBOBOXPARAM + 39)}
      ExtCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44), EgtMsg(MSG_COMBOBOXPARAM + 45)}
-      IntCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44)}
+      IntCornType = {EgtMsg(MSG_COMBOBOXPARAM + 43), EgtMsg(MSG_COMBOBOXPARAM + 44), EgtMsg(90852)}

      ' Assegno array a combobox
      WorkSideCmBx.ItemsSource = WorkSide
@@ -343,8 +343,8 @@ Class MainWindow
      ' Verifico abilitazione nesting automatico
      m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
      ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2606, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2606, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2607, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2607, 1, m_nKeyOptions)
      ' Verifico abilitazione prodotto
      Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
      ' Impostazione per programma OnlyFrame: solo se CUT_BASE non attivo
@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 

-<Assembly: AssemblyVersion("2.6.6.2")>
-<Assembly: AssemblyFileVersion("2.6.6.2")>
+<Assembly: AssemblyVersion("2.6.7.6")>
+<Assembly: AssemblyFileVersion("2.6.7.6")>
@@ -4,6 +4,7 @@ Imports System.Collections.ObjectModel
 Imports EgtUILib
 Imports System.IO
 Imports System.Text
+Imports EgtWPFLib.EgtMsgBox
 Imports OmagCUT.CN_generico

 Public Class CNCommunication
@@ -240,6 +241,16 @@ Public Class CNCommunication
      m_bInInches = (GetPrivateProfileInt(S_AXES, K_ININCHES, 0, m_MainWindow.GetMachIniFile()) <> 0)
   End Sub

+   Private Sub KillSimensCom(sProcessName As String)
+      Dim sAppName As String = Path.GetFileNameWithoutExtension(sProcessName)
+      Dim pList() As System.Diagnostics.Process = System.Diagnostics.Process.GetProcesses
+      For Each proc As System.Diagnostics.Process In pList
+         If proc.ProcessName.ToString = sAppName Then
+            proc.Kill()
+         End If
+      Next
+   End Sub
+
   Private Sub InitCn()

      m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_Yellow")
@@ -407,8 +418,9 @@ Public Class CNCommunication
         EgtOutLog("Error starting NC communication : " & ex.Message)
      End Try

-      '' Per forzare la lettura delle variabili siemens di configurazione
-      'm_nNCType = 3
+      '' !!!!!!!!!!!!! Per forzare la lettura delle variabili siemens di configurazione !!!!!!!!!!!!!
+      ' m_nNCType = 3
+      '' !!!!!!!!!!!!! Per forzare la lettura delle variabili siemens di configurazione !!!!!!!!!!!!!

      Select Case m_nNCType
         Case 0   'Debug
@@ -434,33 +446,27 @@ Public Class CNCommunication
               Try
                  m_MachineStatus.MachineStatusGrid.Background = Application.Current.FindResource("OmagCut_DarkGray")
                  Dim sArg As String = "-start """ & m_sCNSiemensPath & """"
+
+                  ' !!!!!!!!!!!!!! FORZO LA SIMULAZIONE DELLA LETTURA DELLE VARIBILI E SIEMENS !!!!!!!!!!!!!!
+                  EgtOutLog("ProcessStart : " & """" & m_sCNSiemensHMIPath & """" & " " & sArg)
+                  KillSimensCom(m_sCNSiemensHMIPath)
                  Process.Start(m_sCNSiemensHMIPath, sArg)
+                  ' !!!!!!!!!!!!!! FORZO LA SIMULAZIONE DELLA LETTURA DELLE VARIBILI E SIEMENS !!!!!!!!!!!!!!
+
                  EgtOutLog("ProcessStart : " & """" & m_sCNSiemensHMIPath & """" & " " & sArg)
                  m_CN.m_IsSiemensOne = GetPrivateProfileInt(S_NCSIEMENS, K_ISSIEMENSONE, 0, m_MainWindow.GetMachIniFile()) > 0
                  m_CN.m_IsActiveModeSubscription = GetPrivateProfileInt(S_NCSIEMENS, K_ISACTIVEMODESUBSCR, 0, m_MainWindow.GetMachIniFile()) > 0
                  If m_CN.m_IsSiemensOne Then

-                     ' ' Creo l'abbonamento delle seguenti varibili che saranno sempre lette in ciclo dal Siemenscomm
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.Laser), VarType.TInteger, 0)
-                     ' ' stati bottoni ventose
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.LaserTrac), VarType.TInteger, 1)
-                     ' ' stati porte
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.DoorClosed), VarType.TInteger, 2)
-                     ' ' ventose
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.BlowState), VarType.TInteger, 3)
-                     ' ' stati bottoni parte 2
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.CBAxes), VarType.TInteger, 4)
-                     ' ' ampere e ampere override
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.Spindle), VarType.TDouble, 0)
-                     ' m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.SpeedOvr), VarType.TDouble, 1)
-
                     ' Leggo tutte le varaibili che sono state caricate nel percorso [NcData] del file *.ini
                     Dim nIndexArrayBool As Integer = 0
                     Dim nIndexArrayInt As Integer = 0
                     Dim nIndexArrayLong As Integer = 0
                     Dim nIndexArrayDoub As Integer = 0
                     Dim nIndexArrayStr As Integer = 0
-                     ' Creo un vettore che mi permetta di risalire a cose contiene ogni vettore FLAG (di tipo Enum) 
+                     ' lista che associa Indice del vettore al nome (per associazioni Bit a Bit)
+                     Dim ListIndexToVar As New List(Of IndexArrayToBit)
+                     ' Creo un vettore che mi permetta di risalire a cosa contiene ogni vettore FLAG (di tipo Enum) 
                     For ItemIndex As Integer = 0 To m_CN.m_szCnDataVar.Count - 1
                        ' escludo i Flag 'Comm' e 'Refresh'
                        If ItemIndex = CnData.Comm Or ItemIndex = CnData.Refresh Then
@@ -512,6 +518,35 @@ Public Class CNCommunication
                                       m_CN.DVariables_Read_Subscription(sItem(1), nVarType, nIndexArrayStr)
                                       ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayStr, ItemIndex, nVarType))
                                       nIndexArrayStr += 1
+                                    Case 5
+                                       If nIndexArrayInt > 14 Then
+                                          Continue For
+                                       End If
+                                       ' verifico se devo riempire un vettore con bit
+                                       Dim sSubItem As String() = sItem(1).Split("."c)
+                                       ' //My. name. Is Bond._James Bond!
+                                       Dim sVarName = String.Join(".", sSubItem.Take(sSubItem.Length - 1)) ' //My. name. Is Bond
+                                       Dim sIndexBit = sSubItem.Last() ' //_James Bond!
+                                       If sSubItem.Count > 1 And IsNumeric(sIndexBit) Then
+                                          Dim bFound As Boolean = False
+                                          Dim nIndexArrayInt_1 As Integer = nIndexArrayInt
+                                          For Each VarSiemens As IndexArrayToBit In ListIndexToVar
+                                             If VarSiemens.sNameVar.Trim = sVarName.Trim Then
+                                                nIndexArrayInt_1 = VarSiemens.nIndex
+                                                bFound = True
+                                                Exit For
+                                             End If
+                                          Next
+                                          nVarType = VarType.TInteger
+                                          m_CN.DVariables_Read_Subscription(sVarName, nVarType, nIndexArrayInt_1)
+                                          ListReferenceIndex.Add(New RefereceFlagSimens(nIndexArrayInt_1, ItemIndex, nVarType, sIndexBit))
+                                          If Not bFound Then
+                                             nIndexArrayInt += 1
+                                             ListIndexToVar.Add(New IndexArrayToBit(nIndexArrayInt_1, sVarName.Trim))
+                                          End If
+                                       Else
+                                          EgtOutLog(" ATTENZIONE: in [NcData] '" & m_CN.m_szCnDataVar(ItemIndex) & "' non è inidicato il bit associato")
+                                       End If
                                    Case Else
                                       If nIndexArrayInt > 14 Then
                                          Continue For
@@ -522,6 +557,8 @@ Public Class CNCommunication
                                       nIndexArrayInt += 1
                                 End Select
                              End If
+                           Else
+                              EgtOutLog(" ATTENZIONE: in [NcData] '" & m_CN.m_szCnDataVar(ItemIndex) & "' non è indicato il tipo (0→Bool,1→Int,2→Long,3→Double,4→String,5→Bit)")
                           End If
                        End If
                     Next
@@ -529,6 +566,7 @@ Public Class CNCommunication

                     ' Recupero il perocorso delle variabili PLC
                     GetPrivateProfileString(S_NCSIEMENS, K_DBVARPATH, "", m_CN.m_DbVarPath, m_MainWindow.GetMachIniFile)
+
                  ElseIf m_CN.m_IsActiveModeSubscription Then
                     m_CN.DVariables_Read_Subscription(m_CN.m_szCnDataVar(CN_generico.CnData.BlowState), VarType.TInteger, 3)
                  End If
@@ -1056,6 +1094,68 @@ Public Class CNCommunication
      'Laser = 16384
   End Enum

+#Region "MASCHERA per conttrollo Bit a Bit"
+   <Flags()>
+   Public Enum Mask As Integer
+      bit_Err = -1
+      bit_0 = &H1       ' 1
+      bit_1 = &H2       ' 2
+      bit_2 = &H4       ' 4
+      bit_3 = &H8       ' 8
+      bit_4 = &H10      ' 16
+      bit_5 = &H20      ' 32
+      bit_6 = &H40      ' 64
+      bit_7 = &H80      ' 128
+      bit_8 = &H100     ' 256
+      bit_9 = &H200     ' 512
+      bit_10 = &H400     ' 1024
+      bit_11 = &H800     ' 2048
+      bit_12 = &H1000    ' 4096
+      bit_13 = &H2000    ' 8192
+      bit_14 = &H4000    ' 16384
+      bit_15 = &H8000    ' 32768
+   End Enum
+
+   Public Function GetMaskByBit(IndexBit As Integer) As Mask
+      Dim Bit_ As Mask = Mask.bit_Err
+      Select Case IndexBit
+         Case 0
+            Bit_ = Mask.bit_0
+         Case 1
+            Bit_ = Mask.bit_1
+         Case 2
+            Bit_ = Mask.bit_2
+         Case 3
+            Bit_ = Mask.bit_3
+         Case 4
+            Bit_ = Mask.bit_4
+         Case 5
+            Bit_ = Mask.bit_5
+         Case 6
+            Bit_ = Mask.bit_6
+         Case 7
+            Bit_ = Mask.bit_7
+         Case 8
+            Bit_ = Mask.bit_8
+         Case 9
+            Bit_ = Mask.bit_9
+         Case 10
+            Bit_ = Mask.bit_10
+         Case 11
+            Bit_ = Mask.bit_11
+         Case 12
+            Bit_ = Mask.bit_12
+         Case 13
+            Bit_ = Mask.bit_13
+         Case 14
+            Bit_ = Mask.bit_14
+         Case 15
+            Bit_ = Mask.bit_15
+      End Select
+      Return Bit_
+   End Function
+#End Region    ' Maschera per controllo Bit a Bit
+
   Public Function IsSetAll(value As Integer, flag As Integer) As Boolean
      ' somma Bit a Bit
      Return ((value And flag) = flag)
@@ -1071,7 +1171,7 @@ Public Class CNCommunication

      m_MachineStatus.DisplaySpeed()

-      m_MachineStatus.DisplayPower()
+      'm_MachineStatus.DisplayPower()

      m_MachineStatus.DisplayVar()
      'EgtOutLog("Modo attivato: " & m_CN.read_active_mode & " modo attivo: " & m_nCurrMode)
@@ -1104,66 +1204,17 @@ Public Class CNCommunication
         End If
      End If

+      ' lettura delle variabili abbonate
      If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then

-         ' ' lettura variabili stati mancanti su Siemens
-         ' Dim nVarValue As Integer = m_CN.n_data(0)
-         ' EgtOutLog("Variabile PLC control addr: " & 1 & " value: " & nVarValue)
-         ' m_CN.bSpindleState = IsSetAll(nVarValue, ControlStates.Spindle)
-         ' m_CN.bLaserTracState = IsSetAll(nVarValue, ControlStates.LaserTrac)
-         ' m_CN.bCoolantState = IsSetAll(nVarValue, ControlStates.Coolant)
-         ' m_CN.bInternalCoolantState = IsSetAll(nVarValue, ControlStates.InternalCoolant)
-         ' m_CN.bExternCoolantState = IsSetAll(nVarValue, ControlStates.ExternCoolant)
-         ' m_CN.bCBAxesState = IsSetAll(nVarValue, ControlStates.CAxis)
-         ' m_CN.bAirBlowState = IsSetAll(nVarValue, ControlStates.AirBlow)
-         ' m_CN.bHomeState = IsSetAll(nVarValue, ControlStates.Home)
-         ' m_CN.bTableUpState = IsSetAll(nVarValue, ControlStates.TableUp)
-         ' m_CN.bTableDownState = IsSetAll(nVarValue, ControlStates.TableDown)
-         ' m_CN.bLimitZState = IsSetAll(nVarValue, ControlStates.LimitZ)
-         ' m_CN.b5AxesState = IsSetAll(nVarValue, ControlStates.Axis5)
-
-         'nVarValue = m_CN.n_data(1)
-         ''EgtOutLog("Variabile PLC vacuum  addr: " & m_CN.m_szCnDataVar(CN_generico.CnData.LaserTrac) & " value: " & nVarValue)
-         'm_CN.bVacuumUp = IsSetAll(nVarValue, VacuumStates.VacuumUp)
-         'm_CN.bVacuumDown = IsSetAll(nVarValue, VacuumStates.VacuumDown)
-         'm_CN.bVacuum2Up = IsSetAll(nVarValue, VacuumStates.Vacuum2Up)
-         'm_CN.bVacuum2Down = IsSetAll(nVarValue, VacuumStates.Vacuum2Down)
-         'm_CN.bVacuum1State = IsSetAll(nVarValue, VacuumStates.Vacuum1State)
-         'm_CN.bVacuum2State = IsSetAll(nVarValue, VacuumStates.Vacuum2State)
-         'm_CN.bVacuum3State = IsSetAll(nVarValue, VacuumStates.Vacuum3State)
-         'm_CN.bVacuum4State = IsSetAll(nVarValue, VacuumStates.Vacuum4State)
-         'm_CN.bVacuum5State = IsSetAll(nVarValue, VacuumStates.Vacuum5State)
-         'm_CN.bVacuum6State = IsSetAll(nVarValue, VacuumStates.Vacuum6State)
-         'm_CN.bOpenAllState = (m_CN.bVacuum1State And m_CN.bVacuum2State And m_CN.bVacuum3State And m_CN.bVacuum4State And m_CN.bVacuum5State And m_CN.bVacuum6State)
-         'm_CN.bCloseAllState = (Not m_CN.bVacuum1State And Not m_CN.bVacuum2State And Not m_CN.bVacuum3State And Not m_CN.bVacuum4State And Not m_CN.bVacuum5State And Not m_CN.bVacuum6State)
-         'm_CN.bOpen123State = (m_CN.bVacuum1State And m_CN.bVacuum2State And m_CN.bVacuum3State)
-         'm_CN.bOpen456State = (m_CN.bVacuum4State And m_CN.bVacuum5State And m_CN.bVacuum6State)
-         'm_CN.bClose123State = (Not m_CN.bVacuum1State And Not m_CN.bVacuum2State And Not m_CN.bVacuum3State)
-         'm_CN.bClose456State = (Not m_CN.bVacuum4State And Not m_CN.bVacuum5State And Not m_CN.bVacuum6State)
-         'm_CN.bBlowState = IsSetAll(nVarValue, VacuumStates.AirBlow)
-         'm_CN.bVacuumOn = IsSetAll(nVarValue, VacuumStates.VacuumOn)
-         'm_CN.bVacuumOff = IsSetAll(nVarValue, VacuumStates.VacuumOff)
-         'm_CN.bBypassState = IsSetAll(nVarValue, VacuumStates.BypassState)
-         '
-         'nVarValue = m_CN.n_data(2)
-         ''EgtOutLog("Variabile PLC  door addr: " & m_CN.m_szCnDataVar(CN_generico.CnData.DoorClosed) & " value: " & nVarValue)
-         'm_CN.nDoorClosedState = nVarValue
-         '
-         'nVarValue = m_CN.n_data(4)
-         ''EgtOutLog("Variabile PLC control 2 addr: " & 3 & " value: " & nVarValue)
-         'm_CN.bLaserState = IsSetAll(nVarValue, ControlStates2.Laser)
-         'm_CN.bHsm = IsSetAll(nVarValue, ControlStates2.Hsm)
-         'm_CN.bResetState = IsSetAll(nVarValue, ControlStates2.ResetState)
-         'm_CN.bFeedHold = IsSetAll(nVarValue, ControlStates2.FeedHold)
-         'm_CN.bSpeedHold = IsSetAll(nVarValue, ControlStates2.SpindleHold)
-
         '------------ SINUMERIK ONE ----------------------------------------------
         For IndxLst As Integer = 0 To ListReferenceIndex.Count - 1
            Dim nType As Integer = ListReferenceIndex(IndxLst).TypeArray
            Dim nFlag As Integer = ListReferenceIndex(IndxLst).FlagIndex
            Dim nIndex As Integer = ListReferenceIndex(IndxLst).SiemnesArrayIndex
+            Dim nIndexBit As Integer = ListReferenceIndex(IndxLst).IndexBit
            Dim b_temp As Boolean = False
-            Dim n_temp As Boolean = 0
+            Dim n_temp As Integer = 0
            Dim l_temp As Long = 0.0
            Dim d_temp As Double = 0.0
            ' leggo il valore caricato 
@@ -1172,6 +1223,8 @@ Public Class CNCommunication
                  b_temp = m_CN.b_data(nIndex)
               Case VarType.TInteger
                  n_temp = m_CN.n_data(nIndex)
+                  ' VENTOSE: lettura dato da intero Bit a Bit (ver_2.6h1), ritorno un Boolean
+                  b_temp = ReadBit(nIndexBit, n_temp)
               Case VarType.TLong
                  l_temp = m_CN.l_data(nIndex)
               Case VarType.TDouble
@@ -1196,6 +1249,8 @@ Public Class CNCommunication
                  Else
                     m_nCountRefresh = m_nCountRefresh + 1
                  End If
+               Case CN_generico.CnData.Power
+                  m_CN.d_spindle_power = d_temp
               Case CN_generico.CnData.Spindle     ' (7) Stato rotazione mandrino
                  m_CN.bSpindleState = b_temp
               Case CN_generico.CnData.Coolant     ' (8) Stato acqua
@@ -1294,6 +1349,8 @@ Public Class CNCommunication

      End If

+      m_MachineStatus.DisplayPower()
+
      ' Flag e variabili per bottoni macchina, che verifico solo nelle pagine in cui ci sono
      If m_MainWindow.m_ActivePage = MainWindow.Pages.DirectCut Then
         If m_MainWindow.m_DirectCutPageUC.m_NewMachineButtonsType Then
@@ -1383,6 +1440,14 @@ Public Class CNCommunication

   End Sub

+   Private Function ReadBit(IndexBit As Integer, Val As Integer) As Boolean
+      If IndexBit < 0 Then Return False
+      Dim _mask = GetMaskByBit(IndexBit)
+      If _mask = Mask.bit_Err Then Return False
+      If (Val And _mask) = 0 Then Return False
+      Return True
+   End Function
+
   Friend Function SetProgramMainOrSub(bMain As Boolean) As Boolean
      Return m_CN.SetProgramMainOrSub(bMain)
   End Function
@@ -1600,6 +1665,8 @@ Public Class RefereceFlagSimens
   Private m_SiemnesArrayIndex As Integer
   Private m_FlagIndex As Integer
   Private m_TypeArray As Integer
+   ' Opzionale
+   Private m_IndexBit As Integer = -1

   Public Property SiemnesArrayIndex As Integer
      Get
@@ -1628,10 +1695,49 @@ Public Class RefereceFlagSimens
      End Set
   End Property

+   Public Property IndexBit As String
+      Get
+         Return m_IndexBit
+      End Get
+      Set(value As String)
+         m_IndexBit = value
+      End Set
+   End Property
+
   Sub New(IndArray As Integer, Flag As Integer, nType As Integer)
      m_SiemnesArrayIndex = IndArray
      m_FlagIndex = Flag
      m_TypeArray = nType
   End Sub

+   Sub New(IndArray As Integer, Flag As Integer, nType As Integer, nIndBit As Integer)
+      m_SiemnesArrayIndex = IndArray
+      m_FlagIndex = Flag
+      m_TypeArray = nType
+      m_IndexBit = nIndBit
+   End Sub
+
+End Class
+
+Public Class IndexArrayToBit
+
+   Private m_nIndex As Integer = 0
+   Public ReadOnly Property nIndex As Integer
+      Get
+         Return m_nIndex
+      End Get
+   End Property
+
+   Private m_sNameVar As String = ""
+   Public ReadOnly Property sNameVar As String
+      Get
+         Return m_sNameVar
+      End Get
+   End Property
+
+   Sub New(Index As Integer, NameVar As String)
+      m_nIndex = Index
+      m_sNameVar = NameVar
+   End Sub
+
 End Class
@@ -228,7 +228,7 @@ Public Class CN_Siemens
   Public Overrides Sub DVariables_Read_Subscription(VarAddr As String, ParType As Short, Index As Integer)
      ' Ricevo il percorso della varibile, il tipo 
      Dim n_ret As Short = Read_subscription(VarAddr, ParType, Index)
-      'EgtOutLog("CN SIEMENS Dopo lettura abbonamento")
+      EgtOutLog(" ABBONAMENTO (Esito: " & n_ret.ToString & ") -> Address: " & VarAddr & ", Type: " & ParType.ToString & ", Index: " & Index.ToString)
   End Sub

   '
@@ -603,16 +603,15 @@ Module M_MMFiles
      'EgtOutLog("Write_Nc_var start dell'm_mmFiles")
      SiemensSend.n_Command = CMD.CMD_Read_NC_subscription
      SiemensSend.sz_string_2 = VarAddr ' indirizzo su CN dell' oggetto da scrivere 
-      EgtOutLog(" Sottoscrivo lettura di '" & VarAddr & "'")
+      EgtOutLog(" → Sottoscrivo lettura di '" & VarAddr & "'")
      SiemensSend.n_param1 = Index   ' tipo di dato da scrivere
-      EgtOutLog(" Indice del vettore associato '" & Index & "'")
+      EgtOutLog("   Indice del vettore associato '" & Index & "'")
      SiemensSend.n_param2 = ParType   ' tipo di dato da scrivere
-      EgtOutLog(" Indice tipo di variabile '" & ParType & "'")
+      EgtOutLog("   Indice tipo di variabile '" & ParType & "'")
      execute_command()
      m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message = SiemensRet.sz_interf_error_message
-
-      EgtOutLog("sz_interf_error_message: " & m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message)
-      EgtOutLog("n_result: " & SiemensRet.n_result)
+      EgtOutLog("   sz_interf_error_message: " & m_MainWindow.m_CNCommunication.m_CN.sz_interf_error_message)
+      EgtOutLog("   n_result: " & SiemensRet.n_result)
      Return SiemensRet.n_result
   End Function

@@ -7,6 +7,7 @@ Imports EgtWPFLib5
 Public Class CurrentProjectPageUC
   ' Dichiarazione eventi
   Friend Event OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+   Friend Event OnMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs)
   Friend Event OnMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
   Friend Event OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
   ' Riferimento alla MainWindow
@@ -336,6 +337,10 @@ Public Class CurrentProjectPageUC
      RaiseEvent OnMouseDownScene(sender, e)
   End Sub

+   Private Sub OnMyMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.MouseDoubleClick
+      RaiseEvent OnMouseDownScene_DoubleClick(sender, e)
+   End Sub
+
   Private Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.OnMouseMoveScene
      RaiseEvent OnMouseMoveScene(sender, e)
   End Sub
Author	SHA1	Message	Date
Nicola Pievani	5190a41470	Lettura degli interi Bit a Bit	2024-07-30 14:30:53 +02:00
Nicola Pievani	3afe6bb35b	Migliorata stampa dei messaggi OutLog comunicazione	2024-07-29 13:54:57 +02:00
Nicola Pievani	554ae16e48	Merge branch 'develop' into Features/Manage_SimensOne	2024-07-26 18:35:54 +02:00
Nicola Pievani	1b4d239202	OnOff lavorazioni elezione lavorazioni con DoppioClick	2024-07-26 14:30:35 +02:00
Nicola Pievani	3b2d15703a	Lettura bit a bit Siemens	2024-07-25 15:20:47 +02:00
Nicola Pievani	8e5a4d4ac5	Merge branch 'develop' into Features/Manage_SimensOne	2024-07-24 08:51:27 +02:00
Nicola Pievani	f2ce55ff27	Nuova versione programma ver 2.6g1	2024-07-17 13:01:48 +02:00
Nicola Pievani	ae3b16b715	Merge branch 'Features/Imports_Engrave_Btn' into develop	2024-07-17 12:32:39 +02:00
Nicola Pievani	8ff4b74725	Nuovo parametro MachDb Waterjet (Full Slow)	2024-07-17 12:32:25 +02:00
Nicola Pievani	18fb37b497	Inserito comando per gestione Engrave nella pagina IMPORT	2024-06-26 12:30:04 +02:00
Nicola Pievani	246e55f733	Gestione comandi di taglio in SplitPage per tagli piccoli	2024-06-24 16:10:33 +02:00
Nicola Pievani	9b29b16a33	Merge branch 'Features/ZigZan_In_XY_Plane' into develop	2024-06-18 18:05:01 +02:00
Nicola Pievani	1debeab653	Gestione spianatura con fresa e lama	2024-06-18 18:04:44 +02:00
Nicola Pievani	63c3a4e085	Inizio spianatura a ZigZag in XY	2024-06-13 18:32:09 +02:00
Nicola Pievani	7830105bc4	Merge branch 'Features/Raw_From_Diagonal' into develop	2024-06-13 16:20:09 +02:00
Nicola Pievani	26ef6b2d3b	Migliorata gestione SiemensCommand	2024-03-13 11:26:33 +01:00