Corretto versione KeyOption

- ricompilazione per nuova versione (nelle dll corretto problema rallentamenti iniziali e finali non più eseguiti).

CAM/CamAuto.vb

@@ -101,6 +101,74 @@ Friend Module CamAuto
       Return True
    End Function
 
+   Friend Function ResetAllSplitCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, INFO_AUX_SPLIT_WJ)
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllStartCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, INFO_START)
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   ' verifico che il contorno passato non sia stato separato
+   Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer)
+      Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+      While nIdMy <> GDB_ID.NULL
+         Dim nValInfo As Integer = 1
+         If EgtGetInfo(nIdMy, INFO_JOINENTITY, nValInfo) Then
+            If nValInfo = 0 Then Return False
+         End If
+         EgtRemoveInfo(nIdMy, INFO_JOINENTITY)
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return True
+   End Function
+
    Friend Function RemoveFinalEmptyPhases() As Boolean
       Dim nOpeId As Integer = EgtGetLastOperation()
       While nOpeId <> GDB_ID.NULL

CadCuts/CSVFile.vb

@@ -1,5 +1,5 @@
 Imports EgtUILib
-
+Imports System.IO
 
 Friend Module CSVFile
 
@@ -7,6 +7,7 @@ Friend Module CSVFile
 
    '-----------------------------------------------------------------------------------------------
    Friend Class CsvPart
+      Public m_sPath As String = String.Empty
       Public m_sName As String = String.Empty
       Public m_sOrd As String = String.Empty
       Public m_sDist As String = String.Empty
@@ -29,6 +30,10 @@ Friend Module CSVFile
       Public m_dHeel4 As Double = 0
       Public m_nOriInd As Integer = 0
       Public m_nId As Integer = GDB_ID.NULL
+      ' definsco il riferimento al gruppo
+      Public m_sRefGuid As String = System.Guid.NewGuid.ToString
+      ' definisco il colore del gruppo che sto inserendo
+      Public m_cColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
    End Class
 
    '-----------------------------------------------------------------------------------------------
@@ -59,6 +64,7 @@ Friend Module CSVFile
       For i As Integer = 1 To nNbr
          Dim OnePart As New CsvPart
          Dim sN As String = i.ToString()
+         OnePart.m_sPath = sFile
          EgtLuaGetGlobStringVar("CSV.NAME" & sN, OnePart.m_sName)
          OnePart.m_bActive = True
          EgtLuaGetGlobStringVar("CSV.ORD" & sN, OnePart.m_sOrd)
@@ -79,6 +85,9 @@ Friend Module CSVFile
          EgtLuaGetGlobNumVar("CSV.A4_" & sN, OnePart.m_dAng4)
          EgtLuaGetGlobNumVar("CSV.H4_" & sN, OnePart.m_dHeel4)
          OnePart.m_nOriInd = i
+         If OnePart.m_nCount > 1 Then
+            OnePart.m_sRefGuid = System.Guid.NewGuid.ToString
+         End If
          ' inserisco in lista
          CsvPartList.Add(OnePart)
       Next
@@ -139,7 +148,9 @@ Friend Module CSVFile
             Else
                Dim sItems() As String = sLine.Split("=".ToCharArray)
                If sItems.Count() >= 2 Then
-                  If sItems(0) = "Nam" Then
+                  If sItems(0) = "Path" Then
+                     OnePart.m_sPath = sItems(1)
+                  ElseIf sItems(0) = "Nam" Then
                      OnePart.m_sName = sItems(1)
                   ElseIf sItems(0) = "Ord" Then
                      OnePart.m_sOrd = sItems(1)
@@ -181,6 +192,8 @@ Friend Module CSVFile
                      StringToDouble(sItems(1), OnePart.m_dHeel4)
                   ElseIf sItems(0) = "OIn" Then
                      StringToInt(sItems(1), OnePart.m_nOriInd)
+                  ElseIf sItems(0) = "Guid" Then
+                     OnePart.m_sRefGuid = sItems(1).Trim
                   End If
                End If
             End If
@@ -208,6 +221,7 @@ Friend Module CSVFile
          For i As Integer = 1 To CsvPartList.Count()
             Dim CurrPart As CsvPart = CsvPartList(i - 1)
             Writer.WriteLine("[P" & i.ToString() & "]")
+            Writer.WriteLine("Path=" & CurrPart.m_sPath)
             Writer.WriteLine("Nam=" & CurrPart.m_sName)
             Writer.WriteLine("Ord=" & CurrPart.m_sOrd)
             Writer.WriteLine("Dist=" & CurrPart.m_sDist)
@@ -229,19 +243,44 @@ Friend Module CSVFile
             Writer.WriteLine("A4=" & DoubleToString(CurrPart.m_dAng4, 4))
             Writer.WriteLine("H4=" & DoubleToString(CurrPart.m_dHeel4, 4))
             Writer.WriteLine("OIn=" & CurrPart.m_nOriInd.ToString())
+            Writer.WriteLine("Guid=" & CurrPart.m_sRefGuid)
          Next
          ' Terminatore
          Writer.WriteLine("[END]")
          ' Chiudo file
          Writer.Close()
          Return True
-      ' Errore
+         ' Errore
       Catch ex As Exception
          EgtOutLog("CSV List error writing " & sFile)
          Return False
       End Try
    End Function
 
+   ' dato l'elenco completo dei file salvo ogni singolo epl 
+   Friend Function WriteCsvMergePartList(CsvPartList As List(Of CsvPart)) As Boolean
+      Dim bOk As Boolean = True
+      Dim LocalPartList As New List(Of CsvPart)
+      Dim Index As Integer = 0
+      ' devo dividere la lista in tante parti quanti sono i file che lo costituiscono
+      While Index < CsvPartList.Count
+         Dim CurrFile As String = CsvPartList(Index).m_sPath
+         Dim sFile As String = Path.ChangeExtension(CurrFile, ".epl")
+         LocalPartList.Clear()
+         While CurrFile = CsvPartList(Index).m_sPath
+            LocalPartList.Add(CsvPartList(Index))
+            Index += 1
+            ' se terminata la lista
+            If Index = CsvPartList.Count Then
+               Exit While
+            End If
+         End While
+         ' salvo l'elenco corrente
+         bOk = WriteCsvPartList(sFile, CurrFile, LocalPartList) And bOk
+      End While
+      Return bOk
+   End Function
+
    Friend Function RemoveNotToNestParts(ByRef CsvPartList As List(Of CsvPart)) As Boolean
       For i As Integer = CsvPartList.Count() - 1 To 0 Step -1
          If CsvPartList(i).m_nToNest = 0 Then

CadCuts/CSVPage.xaml.vb

@@ -11,7 +11,7 @@ Public Class CSVPage
    Private WithEvents m_CurrProjPage As CurrentProjectPageUC
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
-   ' Flag tipologia
+   ' Flag tipologia (False -> Cvs semplificato)
    Private m_bFull As Boolean = False
    ' Flag inserimento diretto
    Private m_bDirect As Boolean = True
@@ -28,6 +28,10 @@ Public Class CSVPage
    Private m_ptRawMin As Point3d
    Private m_ptRawMax As Point3d
 
+   Dim m_bIsCounterLy As Boolean = False
+   Dim m_nCurrNubrOfParts As Integer = 0
+   Dim m_nIdToSel As Integer = GDB_ID.NULL
+
    Private Sub CSVPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno la lista dei pezzi Csv come sorgente del treeview
       PartsTreeView.ItemsSource = m_ItemsList
@@ -101,13 +105,36 @@ Public Class CSVPage
          If EgtIsPart(nPartId) Or bPartInTable Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nPartId, nStat)
-            ' Se già selezionato, lo deselezione
-            If nStat = GDB_ST.SEL Then
-               EgtDeselectObj(nPartId)
-            ' Altrimenti lo seleziono
-            Else
-               EgtSelectObj(nPartId)
+
+            ' verifico se l'lemento selezionato è il numero di pezzi
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT Then
+               Dim NameLayer As String = String.Empty
+               EgtGetName(EgtGetParent(nId), NameLayer)
+               If NameLayer = INFO_COUNTERLY Then
+                  Dim sText As String = String.Empty
+                  If EgtTextGetContent(nId, sText) Then
+                     Dim sItems() As String = sText.Split("#")
+                     If sItems.Count > 1 Then
+                        m_nCurrNubrOfParts = 0
+                        If StringToInt(sItems(1), m_nCurrNubrOfParts) And m_nCurrNubrOfParts > 0 Then
+                           m_bIsCounterLy = True
+                           m_nIdToSel = nPartId
+                        End If
+                     End If
+                  End If
+               End If
             End If
+
+            If Not m_bIsCounterLy Then
+               ' Se già selezionato, lo deselezione
+               If nStat = GDB_ST.SEL Then
+                  EgtDeselectObj(nPartId)
+                  ' Altrimenti lo seleziono
+               Else
+                  EgtSelectObj(nPartId)
+               End If
+            End If
+
             Exit While
          End If
          nId = EgtGetNextObjInSelWin()
@@ -115,6 +142,28 @@ Public Class CSVPage
       EgtDraw()
    End Sub
 
+   Private Sub OnMyMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseUpScene
+      If m_bIsCounterLy Then
+         ' apro una finestra di dialogo per chiedere se inserire tutti i pezzi della famiglia
+         Dim SelectWD As New SelectPartFromFamilyWD(m_MainWindow, m_nCurrNubrOfParts)
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(m_nIdToSel, INFO_REFGROUP, sRefGroup)
+         ' deseleziono il pezzo corrente
+         m_MainWindow.m_CadCutPageUC.m_NestPage.DeselectPartInFaimily(sRefGroup)
+         Select Case SelectWD.NumberOfSelection
+            Case 0    ' Annulla
+               ' continuo senza eseguire niente
+            Case Else
+               ' seleziono il numero di pezzi indicati
+               m_MainWindow.m_CadCutPageUC.m_NestPage.SelectPartInFaimily(sRefGroup, SelectWD.NumberOfSelection)
+         End Select
+         m_bIsCounterLy = False
+         ' disassegno il riferimento all'oggetto appena creato
+         SelectWD = Nothing
+         EgtDraw()
+      End If
+   End Sub
+
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Remove(Me)
       m_MainWindow.m_CadCutPageUC.CadCutPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC.m_NestPage)
@@ -133,15 +182,48 @@ Public Class CSVPage
       WritePrivateProfileString(S_CSV, K_CSVLASTFILE, "", m_MainWindow.GetIniFile())
    End Sub
 
+   Private Function CreateListOfDeniedFiles() As List(Of String)
+      Dim LocalList As New List(Of String)
+      LocalList.Add("MERGE")
+      Dim Index1 As Integer = 0
+      Dim Index2 As Integer = 0
+      For Index1 = 0 To m_CsvPartList.Count - 1
+         Dim sFileName As String = m_CsvPartList(Index1).m_sPath
+         sFileName = Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim()
+         Dim bNewFile As Boolean = True
+         For Index2 = 0 To LocalList.Count - 1
+            If sFileName = LocalList(Index2) Then
+               bNewFile = False
+               Exit For
+            End If
+         Next
+         If bNewFile Then
+            LocalList.Add(Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim)
+         End If
+      Next
+      Return LocalList
+   End Function
+
    Private Sub OpenBtn_Click(sender As Object, e As RoutedEventArgs) Handles OpenBtn.Click
-      ' Salvo lista dei pezzi attuale
-      SaveCsvPartList()
+      '' Salvo lista dei pezzi attuale
+      'SaveCsvPartList()
       ' Leggo direttorio corrente dei file CSV
       Dim sCurrDir As String = ""
       GetPrivateProfileString(S_CSV, K_CSVCURRDIR, "C:\", sCurrDir, m_MainWindow.GetIniFile())
       ' Apro dialogo scelta file
-      Dim OpenFileWnd As New OpenFileWD(m_MainWindow, sCurrDir, ".CSV", ".EPL")
+      Dim OpenFileWnd As OpenFileWD
+      Dim sDeniedFiles As List(Of String) = CreateListOfDeniedFiles()
+      ' imposto il filtro
+      If m_bFull Then
+         OpenFileWnd = New OpenFileWD(m_MainWindow, sCurrDir, ".CSV", ".EPL", sDeniedFiles)
+      Else
+         OpenFileWnd = New OpenFileWD(m_MainWindow, sCurrDir, ".CSV")
+      End If
       If Not OpenFileWnd.ShowDialog() Then Return
+      ' verifico che il file inserito non appartenga al Merge attuale
+
+      ' Salvo lista dei pezzi attuale
+      SaveCsvPartList()
       ' Salvo direttorio corrente
       WritePrivateProfileString(S_CSV, K_CSVCURRDIR, OpenFileWnd.GetFileDir(), m_MainWindow.GetIniFile())
       ' Apertura file
@@ -173,17 +255,28 @@ Public Class CSVPage
       ' Pulisco path e lista dei pezzi Csv
       m_sFilePath = String.Empty
       m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
+
+      ' mantengo la lista attuale dei pezzi
+      'm_CsvPartList.Clear()
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
       ' Eseguo la lettura del file Csv
-      If Not ReadCsvFile(sCsvPath, m_bFull, m_sCsvPath, m_CsvPartList) Then
+      If Not ReadCsvFile(sCsvPath, m_bFull, m_sCsvPath, LocalPartList) Then
          m_CurrProjPage.SetErrorMessage(EgtMsg(91206))    'Errore nella lettura del file CSV
          Return False
       End If
+
+      ' Creo un nuovo file che ospitarà il merge de
+      Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+      m_sCsvPath = sNewMergeFile
       m_sFilePath = m_sCsvPath
+
       ' Elimino pezzi nulli
-      RemoveWrongParts(m_CsvPartList)
+      RemoveWrongParts(LocalPartList)
       ' Aggiorno
       If m_bFull Then
+         MySaveCsvPartList(LocalPartList)
          ' Salvo come epl
          SaveCsvPartList()
          ' Rinomino file originale
@@ -196,9 +289,40 @@ Public Class CSVPage
          ' eseguo rinomina
          My.Computer.FileSystem.RenameFile(sCsvPath, sBakName)
       End If
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
       Return True
    End Function
 
+   Private Sub LoadCsvPartList(sFile As String)
+      ' Se Csv semplificato non va letta
+      If Not m_bFull Then Return
+      ' Pulisco path e lista dei pezzi Csv
+      m_sCsvPath = String.Empty
+
+      ' mantengo la lista attuale dei pezzi
+      'm_CsvPartList.Clear()
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
+
+      ' Lettura del file
+      If ReadCsvPartList(sFile, m_sCsvPath, LocalPartList) Then
+         ' Creo un nuovo file che ospitarà il merge de
+         Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+         m_sCsvPath = sNewMergeFile
+         m_sFilePath = m_sCsvPath
+      End If
+      ' Elimino pezzi nulli
+      RemoveWrongParts(LocalPartList)
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
+   End Sub
+
    Private Sub ShowTreeView()
       ' Path del file Csv
       Dim TempPath As New Text.StringBuilder(260)
@@ -208,6 +332,7 @@ Public Class CSVPage
       m_ItemsList.Clear()
       Dim sCurrMat As String = String.Empty
       Dim dCurrTh As Double = 0
+      Dim sCurrPath As String = String.Empty
       Dim nCatToNest As Integer = 0
       Dim nCatCount As Integer = 0
       Dim PartCathegory As New PartCathegoryItem("", 0)
@@ -218,19 +343,28 @@ Public Class CSVPage
          If i = 1 Then
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
          ElseIf String.Compare(sCurrMat, CurrPart.m_sMaterial, True) <> 0 Or
+                String.Compare(sCurrPath, CurrPart.m_sPath, True) <> 0 Or
                 Math.Abs(dCurrTh - CurrPart.m_dTh) > 10 * EPS_SMALL Then
             If m_bFull Then
                PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                                     " - " & LenToString(dCurrTh, 2) &
                                     " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
             Else
                PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
             End If
             PartCathegory.IsExpanded = True
             m_ItemsList.Add(PartCathegory)
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
             PartCathegory = New PartCathegoryItem("", 0)
             nCatToNest = 0
             nCatCount = 0
@@ -248,8 +382,14 @@ Public Class CSVPage
          PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                               " - " & LenToString(dCurrTh, 2) &
                               " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
       Else
          PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
       End If
       PartCathegory.IsExpanded = True
       m_ItemsList.Add(PartCathegory)
@@ -259,6 +399,7 @@ Public Class CSVPage
       For Each CatItem As PartCathegoryItem In m_ItemsList
          Dim sCurrMat As String = String.Empty
          Dim dCurrTh As Double = 0
+         Dim sCurrPath As String = String.Empty
          Dim nCatToNest As Integer = 0
          Dim nCatCount As Integer = 0
          For Each PrtItem As PartCustomItem In CatItem.Items
@@ -268,6 +409,7 @@ Public Class CSVPage
             PrtItem.sText1 = sCount
             sCurrMat = PartData.m_sMaterial
             dCurrTh = PartData.m_dTh
+            sCurrPath = PartData.m_sPath
             nCatToNest += PartData.m_nToNest
             nCatCount += PartData.m_nCount
          Next
@@ -275,8 +417,14 @@ Public Class CSVPage
             CatItem.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
                            " - " & LenToString(dCurrTh, 2) &
                            " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
          Else
             CatItem.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
          End If
       Next
    End Sub
@@ -345,6 +493,7 @@ Public Class CSVPage
    End Function
 
    Private Sub InsertBtn_Click(sender As Object, e As RoutedEventArgs) Handles InsertBtn.Click
+      'm_CurrProjPage.ClearMessage()
       ' Recupero lo spessore della lastra corrente
       Dim dRawHeight As Double = GetRawHeight()
       If dRawHeight < EPS_SMALL Then Return
@@ -355,20 +504,17 @@ Public Class CSVPage
       End If
       ' Recupero la tolleranza sullo spessore
       Dim dToler As Double = GetPrivateProfileDouble(S_CSV, K_THICKTOLERANCE, 100 * EPS_SMALL, m_MainWindow.GetIniFile())
-      dToler = Math.Max( dToler, 100 * EPS_SMALL)
+      dToler = Math.Max(dToler, 100 * EPS_SMALL)
       ' Creo la lista dei pezzi inseribili nella lastra corrente
       Dim InsPartList As New List(Of CsvPart)
       For i As Integer = 1 To m_CsvPartList.Count()
          Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
          If CurrPart.m_bActive And
-            (Math.Abs(CurrPart.m_dTh - dRawHeight) < dToler Or
-              CurrPart.m_dTh < EPS_SMALL) And
-            (String.IsNullOrWhiteSpace(CurrPart.m_sMaterial) Or
-             String.IsNullOrWhiteSpace(sCurrMat) Or
-             CurrPart.m_sMaterial = "***" Or
-             sCurrMat = "***" Or
-             String.Compare(CurrPart.m_sMaterial, sCurrMat, True) = 0) Then
+            (Math.Abs(CurrPart.m_dTh - dRawHeight) < dToler Or CurrPart.m_dTh < EPS_SMALL) And
+            (String.IsNullOrWhiteSpace(CurrPart.m_sMaterial) Or String.IsNullOrWhiteSpace(sCurrMat) Or CurrPart.m_sMaterial = "***" Or sCurrMat = "***" Or String.Compare(CurrPart.m_sMaterial, sCurrMat, True) = 0) Then
             InsPartList.Add(CurrPart)
+            'ElseIf CurrPart.m_bActive Then
+            '   m_CurrProjPage.SetWarningMessage("Grezzo non compatibile")
          End If
       Next
       ' Lancio l'inserimento dei pezzi
@@ -480,7 +626,7 @@ Public Class CSVPage
          EgtAdjustFlatPart(nId)
          ' Se Csv completo, aggiungo info su CSV di origine
          If m_bFull Then
-            EgtSetInfo(nId, INFO_CSV_PATH, m_sCsvPath)
+            EgtSetInfo(nId, INFO_CSV_PATH, CurrPart.m_sPath)
             EgtSetInfo(nId, INFO_CSV_PART, CurrPart.m_sName)
             EgtSetInfo(nId, INFO_CSV_ORD, CurrPart.m_sOrd)
             EgtSetInfo(nId, INFO_CSV_DIST, CurrPart.m_sDist)
@@ -490,14 +636,36 @@ Public Class CSVPage
          Utility.SetTextColor( nRegId)
          ' Lo sposto nel gruppo speciale
          EgtRelocate(nId, nIpGrp)
+
+
+         ' assegno l'identificatico del pezzo, se esiste
+         If Not String.IsNullOrEmpty(CurrPart.m_sRefGuid) Then
+            ' GuidCode dovrebbe contenere 36 caratteri, il precode 5: tot = 41
+            If CurrPart.m_sRefGuid.Count <= 36 Then
+               Dim sPreGuid As String = CreatePreGuidCode(CurrPart.m_nId)
+               CurrPart.m_sRefGuid = sPreGuid & CurrPart.m_sRefGuid
+            End If
+            EgtSetInfo(CurrPart.m_nId, INFO_REFGROUP, CurrPart.m_sRefGuid)
+         End If
+         Dim nRegLayId As Integer = EgtGetFirstNameInGroup(CurrPart.m_nId, NAME_REGION)
+         ' Imposto il colore del pezzo inserito nel progetto
+         EgtSetColor(nRegLayId, CurrPart.m_cColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, CurrPart.m_cColor)
+            EntId = EgtGetNext(EntId)
+         End While
+
       Next
       EgtLuaResetGlobVar("CMP")
       EgtLuaResetGlobVar("CMP_Draw")
+
       ' Provo ad inserire i pezzi
       Dim dNewArea As Double = 0
       For i As Integer = 1 To InsPartList.Count()
          Dim CurrPart As CsvPart = InsPartList(i - 1)
          While CurrPart.m_nToNest > 0
+
             If m_bDirect Then
                If NestOnePart(CurrPart.m_nId) Then
                   dNewArea += GeomCalc.GetPartArea(CurrPart.m_nId)
@@ -519,6 +687,7 @@ Public Class CSVPage
       m_CurrProjPage.UpdateTotalArea( dNewArea)
       m_CurrProjPage.UpdateToProduceArea()
       m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
+
       Return True
    End Function
 
@@ -595,11 +764,11 @@ Public Class CSVPage
       Dim sName As String = String.Empty
       EgtGetInfo(nId, INFO_CSV_PART, sName)
       ' Verifico che il pezzo appartenga a questo Csv
-      If String.Compare(sCsvPath, m_sCsvPath, True) = 0 Then
+      If SearchCurrCSV(sCsvPath) Then
          ' Cerco il pezzo nella lista dei pezzi
          For i As Integer = 1 To m_CsvPartList.Count()
             Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
-            If String.Compare(sName, CurrPart.m_sName, True) = 0 Then
+            If String.Compare(sName, CurrPart.m_sName, True) = 0 And String.Compare(sCsvPath, CurrPart.m_sPath, True) = 0 Then
                ' Se nel grezzo
                If EgtGetParent(nId) = m_nRawId Then
                   ' Rimuovo le lavorazioni
@@ -607,19 +776,38 @@ Public Class CSVPage
                   ' Rimuovo dal grezzo
                   EgtRemovePartFromRawPart(nId)
                End If
+               ' recupero il Guid del pezzo corrente (potrebbe essere stato modificato a causa di rotazioni quando il pezzo è passato in parcheggio)
+               Dim sCurrRefGuid As String = String.Empty
+               EgtGetInfo(nId, INFO_REFGROUP, sCurrRefGuid)
                ' Cancello il pezzo
                EgtErase(nId)
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio (se sRefGroup<>"")
+               m_MainWindow.m_CadCutPageUC.m_NestPage.CountPartInFamily(sCurrRefGuid)
                ' Aggiorno il contatore
                CurrPart.m_nToNest += 1
+               ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+               m_MainWindow.m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
                ' Esco
                Return True
             End If
          Next
       End If
+      ' creo la lista delle famiglie di pezzi presenti in parcheggio
+      m_MainWindow.m_CadCutPageUC.m_NestPage.GetFamilyGroupInPark()
       ' Pezzo non appartenente al Csv corrente
       Return False
    End Function
 
+   Private Function SearchCurrCSV(ByVal sCSVFile As String) As Boolean
+      For i As Integer = 1 To m_CsvPartList.Count()
+         Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
+         If String.Compare(sCSVFile, CurrPart.m_sPath, True) = 0 Then
+            Return True
+         End If
+      Next
+      Return False
+   End Function
+
    Friend Sub SaveCsvPartList()
       ' Se Csv semplificato non va salvata
       If Not m_bFull Then Return
@@ -630,24 +818,33 @@ Public Class CSVPage
       End If
       ' Path del file
       Dim sFile As String = Path.ChangeExtension(m_sFilePath, ".epl")
-      ' Scrittura del file
-      If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
-         ' Registro in ini path
-         WritePrivateProfileString(S_CSV, K_CSVLASTFILE, sFile, m_MainWindow.GetIniFile())
+      ' Scrittura dei file
+      If WriteCsvMergePartList(m_CsvPartList) Then
+         ' Scrittura dei file Merge
+         If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
+            WritePrivateProfileString(S_CSV, K_CSVLASTFILE, sFile, m_MainWindow.GetIniFile())
+         End If
       End If
    End Sub
 
-   Private Sub LoadCsvPartList(sFile As String)
-      ' Se Csv semplificato non va letta
+   ' salvo il sottoelenco dei pezzi
+   Friend Sub MySaveCsvPartList(ByVal CurrPartList As List(Of CsvPart))
+      ' Se Csv semplificato non va salvata
       If Not m_bFull Then Return
-      ' Pulisco path e lista dei pezzi Csv
-      m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
-      ' Lettura del file
-      ReadCsvPartList(sFile, m_sCsvPath, m_CsvPartList)
-      m_sFilePath = sFile
-      ' Elimino pezzi nulli
-      RemoveWrongParts(m_CsvPartList)
+      Dim sCurrPath As String = String.Empty
+      ' recupero dalla lista il nome del file corrente
+      For Each Item As CsvPart In CurrPartList
+         sCurrPath = Item.m_sPath
+      Next
+      ' se non trov il nome del file assocciato all'elenco di pezzi esco
+      If String.IsNullOrEmpty(sCurrPath) Then
+         EgtOutLog("CSV Curr list missing")
+         Return
+      End If
+      ' Path del file
+      Dim sFile As String = Path.ChangeExtension(sCurrPath, ".epl")
+      ' Scrittura del file
+      WriteCsvPartList(sFile, sCurrPath, CurrPartList)
    End Sub
 
    Friend Sub UpdateCsvPartList()

CadCuts/CadCutPageUC.xaml.vb

@@ -107,6 +107,9 @@ Public Class CadCutPageUC
 
    Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Se macchina fotografica collegata, faccio una foto
@@ -140,6 +143,9 @@ Public Class CadCutPageUC
 
    Private Sub RawPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RawPartBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_RawPartPage)
@@ -165,6 +171,9 @@ Public Class CadCutPageUC
 
    Private Sub DrawBtn_Click(sender As Object, e As RoutedEventArgs) Handles DrawBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
@@ -172,6 +181,9 @@ Public Class CadCutPageUC
 
    Private Sub ImportBtn_Click(sender As Object, e As RoutedEventArgs) Handles ImportBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_ImportPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Import
@@ -193,10 +205,13 @@ Public Class CadCutPageUC
    End Sub
 
    Private Sub SplitBtn_Click(sender As Object, e As RoutedEventArgs) Handles SplitBtn.Click
+      m_MainWindow.DragRettangleOff()
+      m_MainWindow.SplitCurvWJOff()
+      m_MainWindow.StartCurvWJOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtDeselectObj(m_NestPage.m_CurrSelectedCurv)
       m_ProjectMgr.TestBtn.IsChecked = False
-      m_CurrProjPage.m_bSelectCurv = False
+      m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
       Select Case m_CadCutMode
          Case CadCutModes.Nest, CadCutModes.FastGrid
             ' Passo alla pagina Split
@@ -206,9 +221,9 @@ Public Class CadCutPageUC
                SplitImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/Nest.png", UriKind.Relative))
             End If
             If m_CadCutMode = CadCutModes.Nest Then
-                  CadCutPageGrid.Children.Remove(m_NestPage)
-               Else
-                  CadCutPageGrid.Children.Remove(m_FastGridSlabManager)
+               CadCutPageGrid.Children.Remove(m_NestPage)
+            Else
+               CadCutPageGrid.Children.Remove(m_FastGridSlabManager)
             End If
             CadCutPageGrid.Children.Add(m_SplitPage)
             m_CadCutMode = CadCutModes.Split

CadCuts/MoveRawPartPage.xaml.vb

@@ -28,6 +28,8 @@ Public Class MoveRawPartPage
    Private m_RawMoveDataList As New List(Of RawMoveData)    ' dati di movimento
    Private m_bRawWithCups As Boolean = False                ' flag per pezzo corrente con ventose
 
+   Private m_CurrRawOnVacuum As Integer = GDB_ID.NULL
+
    Private Sub MoveRawPartPage_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Assegno testi
       RemovePartBtn.Content = EgtMsg(MSG_MOVERAWPAGEUC + 1)  'Rimuovi
@@ -230,16 +232,48 @@ Public Class MoveRawPartPage
          If nParentId = nRawGroupId Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nId, nStat)
+            ' Se il pezzo corrente è selezionato allora lo disattivo -> deposito del pezzo
             If nStat = GDB_ST.SEL Then
                EgtSetStatus(nId, GDB_ST.ON_)
-               ' Se con ventose, le nascondo
-               If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola
+               If VerifyCollisionWithOtherRawPart(nId) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(nId, GDB_ST.SEL)
+                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+               Else
+                  ' Se con ventose, le nascondo
+                  If Not m_bByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               End If
             Else
+
+               ' verifico che il pezzo precedente possa essere depositato correttamente
+               If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+                  m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+                  EgtDraw()
+                  ' esco dal ciclo, prima devo depositare correttamente il pezzo
+                  Exit While
+               End If
+               ' salvo l'indice del pezzo correntemente attaccato alle ventose
+               m_CurrRawOnVacuum = nId
+
+               ' Deseleziono tutto e abilito la selezione del pezzo corrente
                EgtDeselectAll()
                EgtSetStatus(nId, GDB_ST.SEL)
                ' Se con ventose, le posiziono sul grezzo
                If Not m_bByHand Then
                   Dim rmData As New RawMoveData
+                  ' inizializzo i dati del grezzo per il cacolo del peso
+                  Dim MaxSinglePlugger As Double = 250
+                  MaxSinglePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_SINGLEPLUGGER, MaxSinglePlugger, m_MainWindow.GetMachIniFile())
+                  Dim MaxDoublePlugger As Double = 750
+                  MaxDoublePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_DOUBLEPLUGGER, MaxDoublePlugger, m_MainWindow.GetMachIniFile())
+                  Dim AverageDensity As Double = 2700
+                  AverageDensity = GetPrivateProfileDouble(S_MATERIALS, K_AVERAGEDENSITY, AverageDensity, m_MainWindow.GetMachIniFile())
+                  VacuumCups.GetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
+                  VacuumCups.GetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, m_MainWindow.GetMachIniFile()) <> 0)
+                  VacuumCups.GetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, m_MainWindow.GetMachIniFile()) <> 0)
                   If PutVacuumCupsOnRaw(nId, rmData) Then
                      ' Visualizzo le ventose
                      EgtSetStatus(GetVacuumId(), GDB_ST.ON_)
@@ -249,10 +283,18 @@ Public Class MoveRawPartPage
                      ' Reset eventuale messaggio
                      m_CurrProjPage.ClearMessage()
                   Else
+                     ' nascondo la visualizzazione delle ventose
+                     EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
                      ' Aggiorno i dati
                      m_bRawWithCups = False
-                     ' Messaggio di avvertimento
-                     m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
+                     If VacuumCups.bOverWeight Then
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 4)) 'Pezzo troppo pesante : non si può muovere
+                     ElseIf VacuumCups.bExtraStroke Then
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 5)) 'Pezzo oltre le corse : non si può muovere
+                     Else
+                        ' Messaggio di avvertimento
+                        m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
+                     End If
                   End If
                End If
             End If
@@ -261,8 +303,52 @@ Public Class MoveRawPartPage
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+
+      ' clicco su un oggetto che non è un grezzo -> verifico che il pezzo precedente possa essere depositato correttamente
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+         EgtDraw()
+      End If
+
    End Sub
 
+   ' Veririfica che il grezzo non entri in colliosione con altri pezzi 
+   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer) As Boolean
+      If nIdOnVacumm = GDB_ID.NULL Then Return False
+      ' Creo gruppo temporaneo in cui generare le superfici per la veririfica di collisione
+      Dim m_nTempId As Integer = EgtCreateGroup(GDB_ID.ROOT)
+      If m_nTempId = GDB_ID.NULL Then Return False
+      EgtSetName(m_nTempId, "RawTemp")
+      Dim nIdActualRawOutLine As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawOutline")
+      Dim ActualRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdActualRawOutLine)
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      Dim nRawGroupId = EgtGetParent(EgtGetFirstRawPart())
+      Dim nIdRaw As Integer = EgtGetFirstRawPart()
+      ' ciclo su tutti i grezzi per veririficare eventuali collisioni
+      While nIdRaw <> GDB_ID.NULL
+         ' verifico la fase del grezzo
+         If EgtVerifyRawPartCurrPhase(nIdRaw) And nIdOnVacumm <> nIdRaw Then
+            ' recupero il contorno del pezzo
+            Dim nIdRawOutLine As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawOutline")
+            Dim nIdRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdRawOutLine)
+            If EgtSurfFrIntersect(nIdRawFlatRegion, ActualRawFlatRegion) Then
+               If EgtExistsObj(nIdRawFlatRegion) Then
+                  EgtErase(m_nTempId)
+                  ' esiste una intersezione delle superfici
+                  Return True
+               End If
+            End If
+         End If
+         nIdRaw = EgtGetNextRawPart(nIdRaw)
+      End While
+      EgtErase(m_nTempId)
+      Return False
+   End Function
+
+#Region "Move Up/Down/Left/Right"
+
    Private Sub UpBtn_Click(sender As Object, e As RoutedEventArgs) Handles UpBtn.Click
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
       While nRawId <> GDB_ID.NULL
@@ -285,9 +371,15 @@ Public Class MoveRawPartPage
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, m_dStep, 0)
+               ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+               m_CurrProjPage.ClearMessage()
+               VerifyReleasdPositionIsValid(vtMove)
+               ' ----------- FINE verifica di essere entro i limiti macchina -----------
                If EgtMoveRawPart(nRawId, vtMove) Then
                   EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                   AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+               Else
+                  VacuumCups.ptStartPointLift.y -= vtMove.y
                End If
             Else
                m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -322,9 +414,15 @@ Public Class MoveRawPartPage
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, -m_dStep, 0)
+               ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+               m_CurrProjPage.ClearMessage()
+               VerifyReleasdPositionIsValid(vtMove)
+               ' ----------- FINE verifica di essere entro i limiti macchina -----------
                If EgtMoveRawPart(nRawId, vtMove) Then
                   EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                   AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+               Else
+                  VacuumCups.ptStartPointLift.y -= vtMove.y
                End If
             Else
                m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -342,9 +440,15 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim vtMove As New Vector3d(m_dStep, 0, 0)
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdPositionIsValid(vtMove)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtMoveRawPart(nRawId, vtMove) Then
                EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.x -= vtMove.x
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -361,9 +465,15 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim vtMove As New Vector3d(-m_dStep, 0, 0)
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdPositionIsValid(vtMove)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtMoveRawPart(nRawId, vtMove) Then
                EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.x -= vtMove.x
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -373,6 +483,77 @@ Public Class MoveRawPartPage
       EgtDraw()
    End Sub
 
+#End Region   'Move Up/Down/Left/Right
+
+   ' verifica che la poszione da raggiungere sia nei limiti delle corse
+   Private Function VerifyReleasdPositionIsValid(ByRef vtMove As Vector3d) As Boolean
+      Dim bOk As Boolean = True
+      ' determino il punto finale dello spostamento
+      Dim ptEndPointLift As Point3d = VacuumCups.ptStartPointLift
+      ptEndPointLift.x += vtMove.x
+      ptEndPointLift.y += vtMove.y
+      Dim sInfo As String = String.Empty
+      Select Case VacuumCups.VerifyOutOfStrokes(ptEndPointLift, VacuumCups.dDegRotStartAng)
+         Case 1
+            ' extra corsa sulla x-: devo ridurre del valore di extra corsa
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.x -= vtMove.x
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.x) <= EPS_SMALL * 100 Then
+               vtMove.x = 0
+            Else
+               vtMove.x -= dMaxMove - EPS_SMALL * 100
+            End If
+            ptEndPointLift.x += vtMove.x
+            bOk = False
+         Case 2
+            ' extra corsa sulla x+: devo ridurre del valore di extra corsa
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.x -= vtMove.x
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.x) <= EPS_SMALL * 100 Then
+               vtMove.x = 0
+            Else
+               vtMove.x -= dMaxMove + EPS_SMALL * 100
+            End If
+            ptEndPointLift.x += vtMove.x
+            bOk = False
+         Case 4
+            ' extra corsa sulla y-
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.y -= vtMove.y
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.y) <= EPS_SMALL * 100 Then
+               vtMove.y = 0
+            Else
+               vtMove.y -= dMaxMove - EPS_SMALL * 100
+            End If
+            ptEndPointLift.y += vtMove.y
+            bOk = False
+         Case 8
+            ' extra corsa sulla y+
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.y -= vtMove.y
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.y) <= EPS_SMALL * 100 Then
+               vtMove.y = 0
+            Else
+               vtMove.y -= dMaxMove + EPS_SMALL * 100
+            End If
+            ptEndPointLift.y += vtMove.y
+            bOk = False
+      End Select
+      ' il movimento del pezzo è accettabile, aggiorno le posizione per la verifica dello step successivo
+      VacuumCups.ptStartPointLift = ptEndPointLift
+      Return bOk
+   End Function
+
+#Region "Rotate CounterClockWise/ClockWise"
+
    Private Sub RotateCounterClockwiseBtn_Click(sender As Object, e As RoutedEventArgs) Handles RotateCounterClockwiseBtn.Click
       ' Solo movimento con ventose
       If m_bByHand Then Return
@@ -380,14 +561,24 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim dAng As Double = m_dRotation
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            ' Recupero il centro del grezzo
+            Dim ptRawCen As Point3d
+            EgtGetRawPartCenter(nRawId, ptRawCen)
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdAngleIsValid(dAng, ptRawCen)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAng) Then
-               ' Recupero il centro del grezzo
-               Dim ptRawCen As Point3d
-               EgtGetRawPartCenter(nRawId, ptRawCen)
+               '' Recupero il centro del grezzo
+               'Dim ptRawCen As Point3d
+               'EgtGetRawPartCenter(nRawId, ptRawCen)
                ' Eseguo la rotazione della ventosa
                EgtRotate(GetVacuumId(), ptRawCen, Vector3d.Z_AX(), dAng, GDB_RT.GLOB)
                ' Memorizzo
                AddRawMoveData(nRawId, dAng, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.Rotate(ptRawCen, Vector3d.Z_AX(), dAng)
+               VacuumCups.dDegRotStartAng -= dAng
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -404,14 +595,24 @@ Public Class MoveRawPartPage
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim dAng As Double = -m_dRotation
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            ' Recupero il centro del grezzo
+            Dim ptRawCen As Point3d
+            EgtGetRawPartCenter(nRawId, ptRawCen)
+            m_CurrProjPage.ClearMessage()
+            VerifyReleasdAngleIsValid(dAng, ptRawCen)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAng) Then
-               ' Recupero il centro del grezzo
-               Dim ptRawCen As Point3d
-               EgtGetRawPartCenter(nRawId, ptRawCen)
+               '' Recupero il centro del grezzo
+               'Dim ptRawCen As Point3d
+               'EgtGetRawPartCenter(nRawId, ptRawCen)
                ' Eseguo la rotazione della ventosa
                EgtRotate(GetVacuumId(), ptRawCen, Vector3d.Z_AX(), dAng, GDB_RT.GLOB)
                ' Memorizzo
                AddRawMoveData(nRawId, dAng, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.Rotate(ptRawCen, Vector3d.Z_AX(), dAng)
+               VacuumCups.dDegRotStartAng -= dAng
             End If
          Else
             m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2)) 'Pezzo troppo piccolo : non si può muovere
@@ -421,6 +622,44 @@ Public Class MoveRawPartPage
       EgtDraw()
    End Sub
 
+#End Region  ' Rotate CounterClockWise/ClockWise
+
+   ' verifica che la rotazione da raggiungere sia nei limiti delle corse
+   Private Function VerifyReleasdAngleIsValid(ByRef dAngDeg As Double, ByVal ptCenter As Point3d) As Boolean
+      Dim bOk As Boolean = True
+      ' determino il punto finale dello spostamento
+      Dim ptEndPointLift As Point3d = VacuumCups.ptStartPointLift
+      Dim dDegRotEndAng As Double = VacuumCups.dDegRotStartAng + dAngDeg
+      ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+      Dim sInfo As String = String.Empty
+      Select Case VacuumCups.VerifyOutOfStrokes(ptEndPointLift, dDegRotEndAng)
+         Case 16
+            ' extra corsa sulla c-
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), -dAngDeg)
+            dDegRotEndAng -= dAngDeg
+            dAngDeg += VacuumCups.GetExtraStrokeValue(sInfo) + EPS_SMALL
+            dDegRotEndAng += dAngDeg
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+            bOk = False
+         Case 34
+            ' extra corsa sulla c+
+            EgtGetOutstrokeInfo(sInfo)
+            m_CurrProjPage.SetWarningMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo)        'Extracorsa ...
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), -dAngDeg)
+            dDegRotEndAng -= dAngDeg
+            dAngDeg -= VacuumCups.GetExtraStrokeValue(sInfo) + EPS_SMALL
+            dDegRotEndAng += dAngDeg
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+            bOk = False
+      End Select
+      ' il movimento del pezzo è accettabile, aggiorno le posizione per la verifica dello step successivo
+      VacuumCups.ptStartPointLift = ptEndPointLift
+      VacuumCups.dDegRotStartAng = dDegRotEndAng
+      Return bOk
+   End Function
+
    Private Sub RemovePartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RemovePartBtn.Click
       Dim nRawId As Integer = EgtGetFirstSelectedObj()
       While nRawId <> GDB_ID.NULL
@@ -658,6 +897,17 @@ Public Class MoveRawPartPage
    End Sub
 
    Private Sub PrevBtn_Click(sender As Object, e As RoutedEventArgs) Handles PrevBtn.Click
+      ' verifico che il pezzo sia depositabile
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+         EgtDraw()
+         ' non cambio pagina
+         Return
+      End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Torno alla fase precedente
@@ -669,6 +919,17 @@ Public Class MoveRawPartPage
    End Sub
 
    Private Sub NextBtn_Click(sender As Object, e As RoutedEventArgs) Handles NextBtn.Click
+      ' verifico che il pezzo sia depositabile
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         m_CurrProjPage.SetErrorMessage("Collisione pezzi")
+         EgtDraw()
+         ' non cambio pagina
+         Return
+      End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Passo alla pagina delle spezzature

CadCuts/NestPageUC.xaml

@@ -99,19 +99,30 @@
             <Image Source="{DynamicResource ClockwiseRotateImg}" Width="65" Height="65" HorizontalAlignment="Center"
                VerticalAlignment="Center" />
          </Button>
-         
-         <UniformGrid Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="2" >
+
+            <UniformGrid Name ="UG0" Grid.Column="0" Grid.Row="5" Grid.ColumnSpan="3" Columns="3" >
                 <Button Name="InsertPartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Inserisci-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
                 <Button Name="StorePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
                     <Image Source="{DynamicResource Parcheggia-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
                 </Button>
+                <ToggleButton Name="StartCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource StartWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
+          
+            <UniformGrid Name ="UG1"  Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="3" >
+                <Button Name="RemovePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Elimina-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <ToggleButton Name="DragRettanleBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Drag_RettangleImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+                <ToggleButton Name="SplitCurveWJBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource SplitWJImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
             </UniformGrid>
-
-            <Button Name="RemovePartBtn" Grid.ColumnSpan="3" Grid.Row="6" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Elimina-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
 
             <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
                 <Button Name="SelectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">

CadCuts/OpenFileWD.xaml.vb

@@ -9,6 +9,7 @@ Public Class OpenFileWD
    Private m_sCurrFile As String = String.Empty
    Private m_sExt As String = String.Empty
    Private m_sExt2 As String = String.Empty
+   Private n_sDeniedFiles As New List(Of String)
 
    Private m_OpenItemList As New ObservableCollection(Of IconListBoxItem)
 
@@ -27,6 +28,15 @@ Public Class OpenFileWD
       InitializeComponent()
    End Sub
 
+   Sub New(Owner As Window, sDir As String, sExt As String, sExt2 As String, DeniedFiles As List(Of String))
+      Me.Owner = Owner
+      m_sCurrDir = sDir
+      m_sExt = sExt
+      m_sExt2 = sExt2
+      n_sDeniedFiles = DeniedFiles
+      InitializeComponent()
+   End Sub
+
    Private Sub OpenFile_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
       ' Posizione finestra
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
@@ -71,13 +81,20 @@ Public Class OpenFileWD
       Dim FileI As FileInfo
       For Each FileI In vFileI
          Dim sExt As String = Path.GetExtension(FileI.Name).ToUpper()
-         If String.Compare(sExt, m_sExt, True) = 0 Or
-            String.Compare(sExt, m_sExt2, True) = 0 Then
+         Dim sFileName As String = Path.GetFileNameWithoutExtension(FileI.Name).ToUpper.Trim
+         Dim bDenied As Boolean = False
+         For Each ItemFile As String In n_sDeniedFiles
+            If ItemFile.ToUpper.Trim = sFileName Then
+               bDenied = True
+               Exit For
+            End If
+         Next
+         If (String.Compare(sExt, m_sExt, True) = 0 Or String.Compare(sExt, m_sExt2, True) = 0) And Not bDenied Then
             m_OpenItemList.Add(New IconListBoxItem(FileI.Name, 3))
          End If
       Next
-      ' riporto visualizzazione in cima alla lista (esiste sempre almeno un elemento)
-      FileListBox.ScrollIntoView(m_OpenItemList(0))
+         ' riporto visualizzazione in cima alla lista (esiste sempre almeno un elemento)
+         FileListBox.ScrollIntoView(m_OpenItemList(0))
       Return True
    End Function
 

CadCuts/SelectPartFromFamilyWD.xaml

@@ -0,0 +1,72 @@
+<Window x:Class="SelectPartFromFamilyWD"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        xmlns:EgtWPFLib="clr-namespace:EgtWPFLib;assembly=EgtWPFLib"
+        FontFamily="{DynamicResource OmagCut_Font}"
+        ResizeMode="NoResize" WindowStyle="None" AllowsTransparency="True" Background="Transparent"
+        Title="SaveNameWD" Height="200" Width="400" ShowInTaskbar="False">
+    <!--Definizione della pagina di scelta del nome con cui salvare il progetto-->
+    <Border Style="{DynamicResource OmagCut_Border}">
+        <Grid x:Name="SaveNameGrid">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="0.5*"/>
+                <ColumnDefinition Width="4*"/>
+                <ColumnDefinition Width="0.5*"/>
+            </Grid.ColumnDefinitions>
+            <Grid.RowDefinitions>
+                <RowDefinition Height="0.1*"/>
+                <RowDefinition Height="0.3*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+                <RowDefinition Height="1*"/>
+                <RowDefinition Height="0.2*"/>
+
+            </Grid.RowDefinitions>
+
+            <!--Messaggio: Seleziona il numero di pezzi-->
+            <TextBlock Name="TitleWDTxbl" Grid.Column="1" Grid.Row="1"
+                       Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+
+            <UniformGrid Grid.Column="1" Grid.Row="3" VerticalAlignment="Center" Columns="2">
+                <TextBlock Name="NbrOfPartsMsg"
+                           Style="{DynamicResource OmagCut_CenteredLowerCaseCharacterTextBlock}"/>
+                <EgtWPFLib:EgtTextBox Name="NbrOfParts"
+                            Style="{DynamicResource OmagCut_CalculatorTextBox}" />
+            </UniformGrid>
+
+            <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="5" Grid.RowSpan="1">
+                <Grid.ColumnDefinitions>
+
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+                    <ColumnDefinition Width="1*"/>
+                    <ColumnDefinition Width="0.5*"/>
+
+                </Grid.ColumnDefinitions>
+
+                <!--ultimo progetto-->
+                <Button Name="ConfirmSelection" Grid.Column="1" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Confirm">
+                    <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <!--nuovo progetto-->
+                <Button Name="SelectAllPart" Grid.Column="2" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Select all" Visibility="Collapsed">
+                    <Image Source="{DynamicResource NuovoImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+                <!--apri folder progetti-->
+                <Button Name="CancelSelection" Grid.Column="5" Style="{DynamicResource OmagCut_RightGrayGradientYellowButton}"
+                        ToolTip="Cancel">
+                    <Image Source="{DynamicResource XImg}" Style="{StaticResource OmagCut_ButtonIcon}"/>
+                </Button>
+
+            </Grid>
+
+        </Grid>
+
+    </Border>
+</Window>

CadCuts/SelectPartFromFamilyWD.xaml.vb

@@ -0,0 +1,66 @@
+Public Class SelectPartFromFamilyWD
+   Private m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
+
+   Private m_NumberOfParts As Integer = 1
+   Public Property NumberOfParts As Integer
+      Get
+         Return m_NumberOfParts
+      End Get
+      Set(value As Integer)
+         m_NumberOfParts = value
+      End Set
+   End Property
+
+   Private m_NumberOfSelection As Integer = 1
+   Public Property NumberOfSelection As Integer
+      Get
+         Return m_NumberOfSelection
+      End Get
+      Set(value As Integer)
+         m_NumberOfSelection = value
+      End Set
+   End Property
+   Public Sub New(Owner As Window, NbrParts As Integer)
+      Me.Owner = Owner
+      m_NumberOfParts = NbrParts
+      InitializeComponent()
+      Me.ShowDialog()
+   End Sub
+
+   ' inizializzo la finestra
+   Private Sub SelectPartFromFamilyWD_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
+      ' posiziono la fistra in centro alla pagina
+      Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
+      Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
+
+      TitleWDTxbl.Text = "Selection parts"
+      NbrOfPartsMsg.Text = "Number of parts"
+      NbrOfParts.Text = m_NumberOfParts.ToString
+   End Sub
+
+   ' seleziono il numero di elementi indicati
+   Private Sub ConfirmSelection_Click(sender As Object, e As RoutedEventArgs) Handles ConfirmSelection.Click
+      Dim nVal As Integer = 0
+      StringToInt(NbrOfParts.Text, nVal)
+      If nVal >= 0 Then
+         m_NumberOfSelection = nVal
+      Else
+         ' indice non valido per la selezione
+         m_NumberOfSelection = 0
+      End If
+      Me.Close()
+   End Sub
+
+   '' seleziona tutti
+   'Private Sub SelectAllPart_Click(sender As Object, e As RoutedEventArgs) Handles SelectAllPart.Click
+   '   m_NumberOfSelection = m_NumberOfParts
+   '   Me.Close()
+   'End Sub
+
+   ' Deseleziomo tutto
+   Private Sub CancelSelection_Click(sender As Object, e As RoutedEventArgs) Handles CancelSelection.Click
+      m_NumberOfSelection = 0
+      Me.Close()
+   End Sub
+
+End Class

CadCuts/SplitPageUC.xaml.vb

@@ -410,25 +410,38 @@ Public Class SplitPageUC
       VerifyHomogenousMachining(ItemList)
 
       ItemList.Sort(Function(x, y) Comparer(Of Integer).Default.Compare(m_ItemList.IndexOf(x), m_ItemList.IndexOf(y)))
-      ' verifico che siano contigui
-      Dim bContigus As Boolean = False
-      Dim OrdIndex = 0
-      OrdIndex = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1).Ind
-      Dim LastSel As NameIdLsBxItem = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1)
-      If MachiningLsBx.SelectedItems.Count = 1 Then
-         bContigus = True
+
+      If VerifyContinuity(ItemList) Then
+         MoveUpBtn.IsEnabled = True
+         MoveDownBtn.IsEnabled = True
       Else
-         For Each Item As NameIdLsBxItem In ItemList
-            If Item.Ind = LastSel.Ind + 1 Or Item.Ind = LastSel.Ind - 1 Then
-               bContigus = True
-            End If
-         Next
-      End If
-      ' se non contiguo, elimino dai selezionati il primo(che è l'ultimo ad essere stato selezionato)
-      If Not bContigus Then
-         ItemList.Remove(LastSel)
-         MachiningLsBx.SelectedItems.RemoveAt(MachiningLsBx.SelectedItems.Count - 1)
+         MoveUpBtn.IsEnabled = False
+         MoveDownBtn.IsEnabled = False
       End If
+
+      GetCurrSelection()
+
+      '' verifico che siano contigui
+      'Dim bContigus As Boolean = False
+      'Dim OrdIndex = 0
+      'OrdIndex = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1).Ind
+      '' recupero l'indice dell'ultimo elemento selezionato
+      'Dim LastSel As NameIdLsBxItem = MachiningLsBx.SelectedItems(MachiningLsBx.SelectedItems.Count - 1)
+      'If MachiningLsBx.SelectedItems.Count = 1 Then
+      '   bContigus = True
+      'Else
+      '   For Each Item As NameIdLsBxItem In ItemList
+      '      If Item.Ind = LastSel.Ind + 1 Or Item.Ind = LastSel.Ind - 1 Then
+      '         bContigus = True
+      '      End If
+      '   Next
+      'End If
+      '' se non contiguo, elimino dai selezionati il primo(che è l'ultimo ad essere stato selezionato)
+      'If Not bContigus Then
+      '   ItemList.Remove(LastSel)
+      '   MachiningLsBx.SelectedItems.RemoveAt(MachiningLsBx.SelectedItems.Count - 1)
+      'End If
+
       ' resetto marcatura lavorazioni
       If m_CurrFirstInd > -1 Then
          For Index As Integer = m_CurrFirstInd To m_CurrLastInd
@@ -497,6 +510,9 @@ Public Class SplitPageUC
    Private Sub OnOffBtn_Click(sender As Object, e As RoutedEventArgs) Handles OnOffBtn.Click
       If m_CurrFirstInd = -1 Then Return
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_bEnabled Then
             m_MachiningList(nI).m_bEnabled = False
@@ -557,6 +573,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Provo ad entrambi gli estremi
          Dim bModif As Boolean = AdjustBothCuts(nI)
@@ -582,6 +601,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Eseguo
          If AdjustEndCut(nI) Then
@@ -601,6 +623,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Eseguo
          If AdjustStartCut(nI) Then
@@ -729,6 +754,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
             EgtSetCurrMachining(m_MachiningList(nI).m_nId)
@@ -827,6 +855,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
             EgtSetCurrMachining(m_MachiningList(nI).m_nId)
@@ -966,6 +997,8 @@ Public Class SplitPageUC
    Private Sub ModifStartBtn_Click(sender As Object, e As RoutedEventArgs) Handles ModifStartBtn.Click
       ' abilito la finestra per inserire i valori solo per il primo elemento della lista (di default tutti gli altri oggetti assumono lo stesso valore)
       Dim bFirstInd As Boolean = True
+      Dim bFirstMill As Boolean = True
+      Dim bFirstWJ As Boolean = True
       ' elenco delle variabili : MCH_MY.SAWING/MCH_MY.MILLING
       Dim dUsal As Double = 0
 
@@ -980,6 +1013,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          Dim nOperId As Integer = m_MachiningList(nI).m_nId
          Dim nMachiningType As Integer = EgtGetOperationType(nOperId)
@@ -993,7 +1029,7 @@ Public Class SplitPageUC
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
             If bFirstInd Then
                ' Dialogo richiesta valore
-               Dim ValWnd As New EditValueWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
+               Dim ValWnd As New EditValueWD(m_MainWindow, "SAW: " & EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
                ValWnd.SetVal(dOrigUsal)
                If Not ValWnd.ShowDialog() Then Return
                ' carico il valore letto dal testierino virtuale
@@ -1045,16 +1081,16 @@ Public Class SplitPageUC
             ' leggo il valore salvato nella geometria
             Dim dOrigUsal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
-            If bFirstInd Then
+            If bFirstMill Then
                ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
                ' Dialogo richiesta valore
-               Dim ValWnd As New EditValueWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
+               Dim ValWnd As New EditValueWD(m_MainWindow, "MILL: " & EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
                ValWnd.SetVal(dOrigUsal)
                If Not ValWnd.ShowDialog() Then Return
                ' carico il valore letto dal testierino virtuale
                dUsal = ValWnd.GetVal()
                ' comunico che ho letto il primo dato
-               bFirstInd = False
+               bFirstMill = False
             End If
             ' ------------------ FINE PREPARAZIONE TASTIERINO VIRTUALE ------------------
 
@@ -1071,7 +1107,7 @@ Public Class SplitPageUC
          ElseIf nMachiningType = MCH_MY.WATERJETTING Then
 
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
-            If bFirstInd Then
+            If bFirstWJ Then
                ' Recupero i valori attuali della lavorazione
                Dim bOriginalIsLeadIn As Boolean = True
                Dim dOriginalAddLen As Double = 0
@@ -1086,7 +1122,7 @@ Public Class SplitPageUC
                EgtGetMachiningParam(MCH_MP.LIPERP, nOriginalPerpDist)
                EgtGetMachiningParam(MCH_MP.LEADINTYPE, nOriginalLeadInType)
                ' Dialogo richiesta valori
-               Dim ModifStartWnd As New ModifStartEndWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 33), bOriginalIsLeadIn, nOperId)      ' Inizio Modif.
+               Dim ModifStartWnd As New ModifStartEndWD(m_MainWindow, "WJ: " & EgtMsg(MSG_SPLITPAGEUC + 33), bOriginalIsLeadIn, nOperId)      ' Inizio Modif.
                ModifStartWnd.SetElongation(dOriginalAddLen)
                ModifStartWnd.SetHole(bOriginalLiHole)
                ModifStartWnd.SetLiTangDist(nOriginalTangDist)
@@ -1101,7 +1137,7 @@ Public Class SplitPageUC
                nWJPerpDist = ModifStartWnd.GetLiPerpDist()
                nWJLeadInType = ModifStartWnd.GetLeadInType().Id
                ' comunico che ho letto il primo dato
-               bFirstInd = False
+               bFirstWJ = False
             End If
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
 
@@ -1132,6 +1168,8 @@ Public Class SplitPageUC
    Private Sub ModifEndBtn_Click(sender As Object, e As RoutedEventArgs) Handles ModifEndBtn.Click
       ' abilito la finestra per inserire i valori solo per il primo elemento della lista (di default tutti gli altri oggetti assumono lo stesso valore)
       Dim bFirstInd As Boolean = True
+      Dim bFirstMill As Boolean = True
+      Dim bFirstWJ As Boolean = True
       ' elenco delle variabili : MCH_MY.SAWING/MCH_MY.MILLING
       Dim dUeal As Double = 0
 
@@ -1145,6 +1183,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          Dim nOperId As Integer = m_MachiningList(nI).m_nId
          Dim nMachiningType As Integer = EgtGetOperationType(nOperId)
@@ -1158,7 +1199,7 @@ Public Class SplitPageUC
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
             If bFirstInd Then
                ' Dialogo richiesta valore
-               Dim ValWnd As New EditValueWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
+               Dim ValWnd As New EditValueWD(m_MainWindow, "SAW: " & EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
                ValWnd.SetVal(dOrigUeal)
                If Not ValWnd.ShowDialog() Then Return
                dUeal = ValWnd.GetVal()
@@ -1191,8 +1232,8 @@ Public Class SplitPageUC
                UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
                bRepeat = Not UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
                If bRepeat Then
-                  EgtSetMachiningParam(MCH_MP.STARTADDLEN, dOrigUeal)
-                  EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUeal)
+                  EgtSetMachiningParam(MCH_MP.ENDADDLEN, dOrigUeal)
+                  EgtSetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
                   dUeal = dOrigUeal
                End If
             Loop Until Not bRepeat
@@ -1208,13 +1249,13 @@ Public Class SplitPageUC
             Dim dOrigUeal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
             ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
-            If bFirstInd Then
+            If bFirstMill Then
                ' Dialogo richiesta valore
-               Dim ValWnd As New EditValueWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
+               Dim ValWnd As New EditValueWD(m_MainWindow, "MILL: " & EgtMsg(MSG_SPLITPAGEUC + 35))      ' Allungamento
                ValWnd.SetVal(dOrigUeal)
                If Not ValWnd.ShowDialog() Then Return
                dUeal = ValWnd.GetVal()
-               bFirstInd = False
+               bFirstMill = False
             End If
             ' ------------------ FINE PREPARAZIONE TASTIERINO VIRTUALE ------------------
             ' Modifica della lavorazione
@@ -1228,7 +1269,7 @@ Public Class SplitPageUC
             ' se altrimenti getto d'acqua
          ElseIf nMachiningType = MCH_MY.WATERJETTING Then
 
-            If bFirstInd Then
+            If bFirstWJ Then
                ' Recupero i valori attuali della lavorazione
                Dim dAddLen As Double = 0
                Dim LeadOutType As Integer = 0
@@ -1240,7 +1281,7 @@ Public Class SplitPageUC
                EgtGetMachiningParam(MCH_MP.LOTANG, nTangDist)
                EgtGetMachiningParam(MCH_MP.LOPERP, nPerpDist)
                ' Dialogo richiesta valore
-               Dim ModifStartWnd As New ModifStartEndWD(m_MainWindow, EgtMsg(MSG_SPLITPAGEUC + 34), False, nOperId)      ' Fine Modif.
+               Dim ModifStartWnd As New ModifStartEndWD(m_MainWindow, "WJ: " & EgtMsg(MSG_SPLITPAGEUC + 34), False, nOperId)      ' Fine Modif.
                ModifStartWnd.SetElongation(dAddLen)
                ModifStartWnd.SetLeadOutType(LeadOutType)
                ModifStartWnd.SetLoTangDist(nTangDist)
@@ -1250,7 +1291,7 @@ Public Class SplitPageUC
                WJLeadOutType = ModifStartWnd.GetLeadOutType().Id
                nWJTangDist = ModifStartWnd.GetLoTangDist()
                nWJPerpDist = ModifStartWnd.GetLoPerpDist()
-               bFirstInd = False
+               bFirstWJ = False
             End If
 
             ' Modifica della lavorazione
@@ -1278,6 +1319,9 @@ Public Class SplitPageUC
    Private Sub InvertBtn_Click(sender As Object, e As RoutedEventArgs) Handles InvertBtn.Click
       If m_CurrFirstInd = -1 Then Return
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Si possono invertire solo i tagli di lama
          If m_MachiningList(nI).m_nType <> MCH_OY.SAWING Then Continue For
@@ -1323,6 +1367,9 @@ Public Class SplitPageUC
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          Dim nOperId As Integer = m_MachiningList(nI).m_nId
          If GetPause(nOperId) Then
@@ -1645,6 +1692,37 @@ Public Class SplitPageUC
       End If
    End Sub
 
+   Private Function VerifyContinuity(ItemList As List(Of NameIdLsBxItem)) As Boolean
+      If ItemList.Count < 2 Then Return True
+      Dim bContigus As Boolean = False
+      For Index As Integer = 0 To ItemList.Count - 2
+         If ItemList(Index).Ind = ItemList(Index + 1).Ind + 1 Or ItemList(Index).Ind = ItemList(Index + 1).Ind - 1 Then
+            bContigus = True
+         Else
+            bContigus = False
+            Exit For
+         End If
+      Next
+      Return bContigus
+   End Function
+
+   Private Sub GetCurrSelection()
+      For Each Item As NameIdLsBxItem In m_ItemList
+         Item.IsSelected = False
+      Next
+      ' recupero il numero di elementi selezionati
+      Dim nCount As Integer = MachiningLsBx.SelectedItems.Count
+      For Index As Integer = 0 To nCount - 1
+         Dim Local_ItemTemplate As NameIdLsBxItem = MachiningLsBx.SelectedItems(Index)
+         For Each Item As NameIdLsBxItem In m_ItemList
+            If Item.Ind = Local_ItemTemplate.Ind Then
+               Item.IsSelected = True
+               Exit For
+            End If
+         Next
+      Next
+   End Sub
+
    Private Sub VisibilityButtonFromMachinig(ByVal Type As Integer)
       If Type <> MCH_OY.SAWING Then
          CutBtn.Visibility = Visibility.Hidden
@@ -1721,6 +1799,15 @@ Public Class SplitPageUC
       vtXY.Normalize()
       Dim ptCen As Point3d = Point3d.Media(ptMin, ptMax) + vtXY * If(Not b2ndLav, -0.8, 0.8) * dHtxt
       ptCen.z = ptMax.z + 1
+
+      ' ricavo la posizione del punto (se waterjet separata)
+      If m_MachiningList(nI).m_nType = MCH_OY.WATERJETTING Or m_MachiningList(nI).m_nType = MCH_OY.MILLING Then
+         Dim ptMid As Point3d
+         Dim vVers As Vector3d
+         MidPointOfCurve(m_MachiningList(nI).m_nId, ptMid, vVers)
+         ptCen = ptMid ' + vVers * If(Not b2ndLav, -0.8, 0.8) * dHtxt
+      End If
+
       If bNumber Then
          Dim nNbrId As Integer = EgtCreateTextAdv( m_nNbrGrpId, ptCen, 0, (nI + 1).ToString(), "",
                                                    300, False, dHtxt, dRat, 0, INS_POS.MC)
@@ -1775,6 +1862,36 @@ Public Class SplitPageUC
       Return EgtGetBBoxGlob(nPvId, GDB_BB.STANDARD, ptMin, ptMax)
    End Function
 
+   Private Function MidPointOfCurve(nOperId As Integer, ByRef ptMid As Point3d, ByRef vVers As Vector3d) As Boolean
+      Dim nPvId As Integer = GDB_ID.NULL
+      EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+      ' creo un layer ausiliario per creare la curva composita
+      Dim AuxLayer As Integer = EgtCreateGroup(nPvId)
+      ' imposto la lavorazione corrente
+      EgtSetCurrMachining(nOperId)
+      ' recupero tutte le entità della lavorazione corrente
+      Dim nInd As Integer = 0
+      Dim nIdCurr As Integer
+      Dim nSub As Integer
+      Dim CurveCompoList As New List(Of Integer)
+      While EgtGetMachiningGeometry(nInd, nIdCurr, nSub)
+         CurveCompoList.Add(nIdCurr)
+         nInd += 1
+      End While
+      Dim PtNearStart As Point3d
+      Dim nIdCutPath As Integer = EgtCreateCurveCompoByChain(AuxLayer, CurveCompoList.ToArray, PtNearStart, False)
+      Dim dLength As Double = 0
+      EgtCurveLength(nIdCutPath, dLength)
+      Dim dParam As Double = 0
+      EgtCurveParamAtLength(nIdCutPath, dLength / 2, dParam)
+      EgtAtParamPoint(nIdCutPath, dParam, GDB_RT.GLOB, ptMid)
+      EgtAtParamVector(nIdCutPath, dParam, -1, vVers)
+      vVers.Normalize()
+      vVers.Rotate(Vector3d.Z_AX, 90)
+      EgtErase(AuxLayer)
+      Return True
+   End Function
+
    Private Function AddMachiningDirection( ptStart As Point3d, vtDir As Vector3d, dLen As Double, bTwin As Boolean) As Integer
       Dim dArrX As Double = dLen * Math.Cos( 30 * Math.PI / 180)
       Dim dArrY As Double = dLen * Math.Sin( 30 * Math.PI / 180)
@@ -1854,7 +1971,10 @@ Public Class SplitPageUC
       EgtDisableModified()
       ' cancello evidenziazione
       If m_CurrFirstInd >= 0 Then
-         For Index As integer = m_CurrFirstInd To m_CurrLastInd
+         For Index As Integer = m_CurrFirstInd To m_CurrLastInd
+            If Not m_ItemList(Index).IsSelected Then
+               Continue For
+            End If
             MarkMachining(m_ItemList(Index).Ind, False)
          Next
          m_CurrFirstInd = -1
@@ -1913,6 +2033,8 @@ Public Class SplitPageUC
       Private m_bIsActive As Boolean
       Private m_nType As Integer
 
+      Private m_IsSelected As Boolean
+
       Public Property Ind As Integer
          Get
             Return m_nInd
@@ -1955,6 +2077,15 @@ Public Class SplitPageUC
          End Set
       End Property
 
+      Public Property IsSelected As Boolean
+         Get
+            Return m_IsSelected
+         End Get
+         Set(value As Boolean)
+            m_IsSelected = value
+         End Set
+      End Property
+
       Sub New(Name As String, Ind As Integer, bIsActive As Boolean, nType As Integer)
          Me.m_sName = Name
          Me.m_nInd = Ind

CadCuts/VacuumCups.vb

@@ -1,4 +1,5 @@
 Imports EgtUILib
+Imports System.Text.RegularExpressions
 
 Module VacuumCups
    ' Tipo manipolatore con ventosa (0=assente, 1=dietro, 2=laterale)
@@ -8,7 +9,24 @@ Module VacuumCups
    Private m_nVacId As Integer = GDB_ID.NULL
    Private m_nRefId As Integer = GDB_ID.NULL
    Private m_dPreferredRot As Double = 0
+   Private m_dPrefVertRotXMinus As Double = 0
+   Private m_dPrefVertRotXPlus As Double = 0
+   Private m_dPrefVertRotYMinus As Double = 0
+   Private m_dPrefVertRotYPlus As Double = 0
    Private m_dDripRefAng As Double = 0
+   ' dati carico massimo manipolatore
+   Private m_RawDensity As Double = 2500
+   Private m_RawWeight As Double = 0
+   Private m_MaxWeightSinglePlugger As Double = 250
+   Private m_MaxWeightDoublePlugger As Double = 750
+   Public bOverWeight As Boolean = False
+   ' dati per rotazione ventose vicono al fine corsa Y e X
+   Private bRotateVacuumNearExtraStrokeY As Boolean = False
+   Private bRotateVacuumNearExtraStrokeX As Boolean = False
+   ' dati stroke
+   Public bExtraStroke As Boolean = False
+   Public ptStartPointLift As Point3d
+   Public dDegRotStartAng As Double
 
    ' Nome del gruppo temporaneo per le ventose
    Private Const VACTMP_GRP As String = "VacTmp"
@@ -48,6 +66,20 @@ Module VacuumCups
       Return m_nVacType
    End Function
 
+   ' carico i dati macchina relativi al peso massimo movimentabile
+   Friend Sub GetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
+      m_RawDensity = Density
+      m_MaxWeightSinglePlugger = MaxSingle
+      m_MaxWeightDoublePlugger = MaxDouble
+   End Sub
+
+   Friend Sub GetRotationForExtraStrokeY(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeY = Rotate
+   End Sub
+
+   Friend Sub GetRotationForExtraStrokeX(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeX = Rotate
+   End Sub
    Friend Function GetVacuumId() As Integer
       Return m_nVacId
    End Function
@@ -64,6 +96,8 @@ Module VacuumCups
       ' Identificativo riferimento della testa nella macchina
       Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT)
       If nT1Id = GDB_ID.NULL Then Return False
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", "H4", 1)
       ' Creo gruppo temporaneo in cui copiarli
       m_nTempId = EgtCreateGroup(GDB_ID.ROOT)
       If m_nTempId = GDB_ID.NULL Then Return False
@@ -74,6 +108,11 @@ Module VacuumCups
       If m_nVacId = GDB_ID.NULL Then Return False
       ' Angolo di rotazione preferito
       EgtGetInfo( m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
+      ' Angoli di rotazione preferiti per ventosa in verticale (lungo Y) a sinistra e a destra del centro tavola
+      EgtGetInfo( m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYMINUS, m_dPrefVertRotYMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYPLUS, m_dPrefVertRotYPlus)
       ' Direzione di riferimento per tagli Drip
       EgtGetInfo( m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
       ' Nascondo il gruppo ma rendo visibili le curve di contorno delle ventose
@@ -160,6 +199,18 @@ Module VacuumCups
       EgtGetBBoxGlob(nRKerfId, GDB_BB.STANDARD, b3Kerf)
       Dim ptKerfCen As Point3d
       EgtCentroid(nRKerfId, GDB_ID.ROOT, ptKerfCen)
+
+      '-------------------- INIZIO CALCOLO PESO --------------------
+      ' recupero l'area del grezzo da muovere
+      Dim RawArea As Double = 0
+      ' superficie del grezzo senza considerare eventuali fori
+      EgtSurfFrGrossArea(nRKerfId, RawArea)
+      ' volume calcolato in mmc
+      Dim RawVolume As Double = RawArea * b3Raw.DimZ()
+      ' peso calolato in kg
+      m_RawWeight = RawVolume * m_RawDensity / Math.Pow(10, 9)
+      '-------------------- FINE CALCOLO PESO --------------------
+
       ' Eseguo ricerca
       If FindVacuumCupsOnRaw(nRawId, ptRawCen, b3Kerf, ptKerfCen, nKerfId, nRKerfId, rmData) Then
          Return True
@@ -182,6 +233,7 @@ Module VacuumCups
       Return False
    End Function
 
+   ' utilizzata per gestire la movimentazione dei pezzi per eseguire i drip
    Friend Function PutVacuumCupsOnPart(nPartId As Integer,
                                        ByRef rmData As RawMoveData, ByRef b3Part As BBox3d) As Boolean
       ' Ripristino posizione originale ventose
@@ -261,6 +313,7 @@ Module VacuumCups
          Dim sCups() As String = Nothing
          Dim sCups2() As String = Nothing
          If Not GetVacuumCupSelection(nI, sCups, sCups2) Then Return False
+         bExtraStroke = False
          ' Determino validità soluzioni della configurazione
          Dim vtMove As New Vector3d
          Dim ptRotCen As New Point3d
@@ -289,6 +342,7 @@ Module VacuumCups
          Dim frCurrRef As New Frame3d
          EgtFrame(m_nRefId, GDB_ID.ROOT, frCurrRef)
          Dim vtDelta As Vector3d = frCurrRef.Orig() - ptRawCen
+
          ' Assegno dati noti al movimento del grezzo
          rmData.m_nId = nRawId
          rmData.m_vtRawMove = Vector3d.NULL()
@@ -363,6 +417,26 @@ Module VacuumCups
       If b3Vac.IsEmpty() Then Return INFINITO
       ' Se box maggiore di quello del pezzo, scarto soluzione
       If b3Vac.Radius() > b3Raw.Radius() Then Return INFINITO
+      '-------------------- INIZIO VERIFICA PESO --------------------
+      bOverWeight = False
+      Select Case GetPluggerFromCameras(sCups)
+         Case 2
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightDoublePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+         Case 1
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightSinglePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+      End Select
+      '-------------------- FINE VERIFICA PESO --------------------
+      ' Recupero l'area della tavola
+      Dim b3Tab As New BBox3d
+      EgtGetTableArea(1, b3Tab)
       ' Determino il movimento
       vtMove = ptRawCen - b3Vac.Center()
       b3Vac.Move(vtMove)
@@ -374,11 +448,30 @@ Module VacuumCups
          frMinRect.VersX().ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
          dRotAngDeg = dAngOrizzDeg
          If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
+         Dim dPreferredRot As Double = m_dPreferredRot
+         ' -------------------- INIZIO GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
+         ' verifico l'orientamento del pezzo
+         If bRotateVacuumNearExtraStrokeX And (Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45) Then
+            ' se l'orientamento è verticale
+            If frMinRect.Orig().x < b3Tab.Center().x Then
+               dPreferredRot = m_dPrefVertRotXMinus
+            Else
+               dPreferredRot = m_dPrefVertRotXPlus
+            End If
+         ElseIf bRotateVacuumNearExtraStrokeY And (Math.Abs(dRotAngDeg - 90) > 45 Or Math.Abs(dRotAngDeg - 270) > 45) Then
+            ' se l'orientemanto è orizzontale e la macchina è stata abilitata
+            If frMinRect.Orig().y < b3Tab.Center().y Then
+               dPreferredRot = m_dPrefVertRotYPlus
+            Else
+               dPreferredRot = m_dPrefVertRotYMinus
+            End If
+         End If
+         ' -------------------- FINE GESTIONE ROTAZIONE ASSE C PER NON ANDARE IN EXTRA-CORSA --------------------
          Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
-         While dRotAngDeg - m_dPreferredRot >= dAngDelta / 2 
+         While dRotAngDeg - dPreferredRot >= dAngDelta / 2 
             dRotAngDeg -= dAngDelta
          End While
-         While dRotAngDeg - m_dPreferredRot <= -dAngDelta / 2
+         While dRotAngDeg - dPreferredRot <= -dAngDelta / 2
             dRotAngDeg += dAngDelta
          End While
       Else
@@ -430,13 +523,55 @@ Module VacuumCups
       ' Applico movimento e rotazione al punto
       ptRef.Move(vtMove)
       ptRef.Rotate(ptRotCen, Vector3d.Z_AX(), dRotAngDeg)
+
+      ' -------------- INIZIO verifica di essere nel limite delle corse macchina --------------
+      If VerifyOutOfStrokes(ptRef, dRotAngDeg) <> 0 Then
+         bExtraStroke = True
+         Return INFINITO
+      End If
+      ' se la posizione è accettbaile allora salvo i dati
+      ptStartPointLift = ptRef
+      dDegRotStartAng = dRotAngDeg
+      ' -------------- FINE verifica di essere nel limite delle corse macchina --------------
+
       ' Ne calcolo la distanza dal centro della tavola
-      Dim b3Tab As New BBox3d
-      EgtGetTableArea(1, b3Tab)
       Dim dDist As Double = Point3d.DistXY(ptRef, b3Tab.Center())
       Return dDist
    End Function
 
+   ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", "H4", 1)
+      EgtGetCalcPositions(ptRef, dRotAngDeg + dCHome, 0, nStat, dX, dY, dZ)
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngDeg + dCHome, 0, nStat)
+      Return nStat
+   End Function
+
+   ' dall'informazione di extra corsa recupera il valore indicato
+   Public Function GetExtraStrokeValue(sInfo As String) As Double
+      Dim dExtraStroke As Double = 0
+      Dim sItems As String() = sInfo.Split("="c)
+      If sItems.Count = 2 Then
+         Dim nStartIndex As Integer = 0
+         For Each ItemChar As Char In sItems(1)
+            If ItemChar = "("c Then
+               Exit For
+            End If
+            nStartIndex += 1
+         Next
+         If nStartIndex > 0 Then
+            Dim sValue As String = sItems(1).Remove(nStartIndex, sItems(1).Count - nStartIndex)
+            StringToLen(sValue, dExtraStroke)
+         End If
+      End If
+      Return dExtraStroke
+   End Function
+
    Private Function TestVacuumCups(nCups() As Integer, nRawRegId As Integer,
                                    vtMove As Vector3d, ptRotCen As Point3d, dRotAngDeg As Double) As Boolean
       ' Eseguo verifica delle ventose rispetto al grezzo
@@ -457,6 +592,28 @@ Module VacuumCups
       Return bVacOk
    End Function
 
+   ' dato il vettore delle camere restituisco il quali attuatori sono coinvolti
+   Private Function GetPluggerFromCameras(sCups() As String) As Integer
+      Dim nCountPlunger As Integer = 1
+      Dim bPlugger1 As Boolean = False
+      Dim bPlugger2 As Boolean = False
+      For Each Camera As String In sCups
+         If (Camera.Contains("1") Or Camera.Contains("2") Or Camera.Contains("3")) Then
+            bPlugger1 = True
+         Else
+            bPlugger2 = True
+         End If
+      Next
+      ' verifico quali sono le camere attive
+      If bPlugger1 And bPlugger2 Then
+         nCountPlunger = 2
+      ElseIf Not bPlugger1 And Not bPlugger2 Then
+         nCountPlunger = 0
+      End If
+      ' restituisco il numero di Plugger in uso
+      Return nCountPlunger
+   End Function
+
    Friend Function SaveOneMoveInfo(nId As Integer, rmData As RawMoveData) As Boolean
       ' Assegno le informazioni
       EgtSetInfo(nId, "Id", rmData.m_nId)

Constants/ConstGen.vb

@@ -92,6 +92,10 @@ Module ConstGen
    Public Const KEY_VACLAY_SEL As String = "Sel"
    ' Info in gruppo layout per angolo di rotazione preferito
    Public Const KEY_VACLAY_PREFROT As String = "PreferredRot"
+   Public Const KEY_VACLAY_PREFVROTXMINUS As String = "PrefVertRotXMinus"
+   Public Const KEY_VACLAY_PREFVROTXPLUS As String = "PrefVertRotXPlus"
+   Public Const KEY_VACLAY_PREFVROTYMINUS As String = "PrefVertRotYMinus"
+   Public Const KEY_VACLAY_PREFVROTYPLUS As String = "PrefVertRotYPlus"
    ' Info in gruppo layout per direzione di riferimento ventose per tagli da sotto
    Public Const KEY_VACLAY_DRIPREFDIR As String = "DripRefDir"
    ' Info in asse rotante ventosa per step discreti
@@ -145,6 +149,9 @@ Module ConstGen
    Public Const INFO_RAW_BLOCK = "Block"
    ' Info per numero lastra nel blocco
    Public Const INFO_RAW_SLABNBR = "SlabNbr"
+   ' Info per identificazione gruppo pezzi
+   Public Const INFO_REFGROUP As String = "RefGroup"
+   Public Const INFO_COUNTERLY As String = "CounterPz"
 
    ' Contrassegno di progetto OmagCut
    Public Const NAME_PROJMARK As String = "OmagCut"
@@ -180,6 +187,8 @@ Module ConstGen
    Public Const INFO_TOTAREA As String = "TotArea"
    ' Info per area da produrre dei pezzi del progetto
    Public Const INFO_TOPRODAREA As String = "ToProdArea"
+   ' Info per nome progetti
+   Public Const INFO_PROJNAME As String = "ProjName"
 
    ' Nome layer delle regioni
    Public Const NAME_REGION As String = "Region"
@@ -295,6 +304,12 @@ Module ConstGen
    Public Const INFO_PARTOK As String = "POK"
    ' Info in pezzo per stato rotazione
    Public Const INFO_PARTROT As String = "ROT"
+   ' Info in entità in OutLoop per indicare se è separata WaterJet
+   Public Const INFO_JOINENTITY As String = "JoinEntity"
+   ' Nome layer per "*" inidcanti un lato separato nel taglio WaterJet
+   Public Const INFO_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
+   ' Info in OutLoop per punto inzio lavorazione WaterJet
+   Public Const INFO_START As String = "Start"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"

Constants/ConstIni.vb

@@ -46,6 +46,10 @@ Module ConstIni
    Public Const K_THEME As String = "Theme"
    Public Const K_MANUAL_CUT As String = "ManualCut"
    Public Const K_TEST As String = "Test"
+   Public Const K_SMARTMACHININGPAGE As String = "SmartMachiningPage"
+   Public Const K_STARTPROGRAM As String = "StartProgram"
+   Public Const K_GENERATECN As String = "GenerateCN"
+
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"
@@ -148,6 +152,7 @@ Module ConstIni
    Public Const K_TEXTCOLOR As String = "TextColor"
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
+   Public Const K_DRAG_RETTANGLE As String = "DragRectangle"
 
    Public Const S_SPLIT As String = "Split"
    Public Const K_MOVE_LEV As String = "MoveLevel"

Constants/ConstKitData.vb

@@ -11,9 +11,18 @@
    Public Const K_ZIGZAGX As String = "ZigZagX"
    Public Const K_OFFZIGZAGX As String = "OffZigZagX"
    Public Const K_STEPX As String = "StepX"
+   Public Const K_RADIUSX As String = "RadiusX"
+   Public Const K_DISTANCEX As String = "DistanceX"
    Public Const K_ZIGZAGY As String = "ZigZagY"
    Public Const K_OFFZIGZAGY As String = "OffZigZagY"
    Public Const K_STEPY As String = "StepY"
+   Public Const K_RADIUSY As String = "RadiusY"
+   Public Const K_DISTANCEY As String = "DistanceY"
+   Public Const K_SPIRAL As String = "Spiral"
+   Public Const K_OFFSPIRAL As String = "OffSpiral"
+   Public Const K_STEPSPIRAL As String = "StepSpiral"
+   Public Const K_RADIUSSPIRAL As String = "RadiusSpiral"
+   Public Const K_DISTANCESPIRAL As String = "DistanceSpiral"
    Public Const K_LILEN As String = "LiLen"
    Public Const K_LIHEIGHT As String = "LiHeight"
    Public Const K_LILOAD As String = "LiLoad"

Constants/ConstMachIni.vb

@@ -44,6 +44,7 @@
    Public Const S_NCNUM As String = "NcNUM"
    Public Const K_RESETSENDDELAY As String = "ResetSendDelay"
    Public Const K_THREADSLEEP As String = "ThreadSleep"
+   Public Const K_PHOTODELEY As String = "PhotoDeley"
 
    Public Const S_NCDATA As String = "NcData"
    Public Const K_NEWVARIABLE As String = "NewVariable"
@@ -76,6 +77,9 @@
    Public Const K_DOORCLOSED As String = "DoorClosed"
    Public Const K_LIMITZ As String = "LimitZ"
    Public Const K_POWEROVR As String = "PowerOvr"
+   Public Const K_PARKING As String = "Parking"
+   Public Const K_ENABLEZONE As String = "EnableZone"
+   Public Const K_ENABLEPC As String = "EnablePC"
    Public Const K_HSM As String = "Hsm"
    Public Const K_VACUUMUP As String = "VacuumUp"
    Public Const K_VACUUMDOWN As String = "VacuumDown"
@@ -103,6 +107,8 @@
    Public Const K_VACUUMOFF As String = "VacuumOff"
    Public Const K_BYPASSTATE As String = "BypassState"
    Public Const K_FEEDHOLD As String = "FeedHold"
+   Public Const K_SPOTLIGHT1 As String = "SpotLight1"
+   Public Const K_SPOTLIGHT2 As String = "SpotLight2"
    ' Nuove variabili
    Public Const K_SPEEDHOLD As String = "SpeedHold"
    Public Const K_XYJOG As String = "XYJog"
@@ -222,6 +228,10 @@
    Public Const S_MACH_RAWMOVE As String = "RawMove"
    Public Const K_MACH_RM_ROTATE As String = "Rotate"
    Public Const K_MACH_RM_FINALMOVE As String = "FinalMove"
+   Public Const K_MACH_WEIGHT_SINGLEPLUGGER As String = "MaxWeightSinglePlugger"
+   Public Const K_MACH_WEIGHT_DOUBLEPLUGGER As String = "MaxWeightDoublePlugger"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEY As String = "RotateVacuumForExtraStrokeY"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEX As String = "RotateVacuumForExtraStrokeX"
 
    Public Const S_MACH_REG As String = "Reg"
    Public Const K_MACH_MAX_ROT_ANG As String = "MaxRotAng"
@@ -245,6 +255,7 @@
 
    Public Const S_MACH_INPROGRESS As String = "InProgress"
    Public Const K_PHASEVAR As String = "PhaseVar"
+   Public Const K_WP_STEPTIME As String = "WPStepTime"
 
    Public Const S_MACH_PROBING As String = "Probing"
    Public Const K_PROBINGSTATEVAR As String = "ProbingStateVar"
@@ -282,5 +293,7 @@
    Public Const S_MATERIALS As String = "Materials"
    Public Const K_CURRMATERIAL As String = "CurrMaterial"
    Public Const K_MATERIAL As String = "Material"
+   Public Const K_FROMDBWATERJET As String = "FromDBWaterJet"
+   Public Const K_AVERAGEDENSITY As String = "AverageDensity"
 
 End Module

DirectCuts/ControlsMachineButtonUC.xaml.vb

@@ -330,6 +330,49 @@ Public Class ControlsMachineButtonUC
       End If
    End Sub
 
+   Friend Sub ParkingStateChanged(ParkingState As Boolean)
+      Dim ParkingButton As TwoStateButton = Nothing
+      For Each MachineButton As MachineButton In m_ButtonList
+         If MachineButton.StateFlag = K_PARKING Then
+            ParkingButton = MachineButton
+         End If
+      Next
+      If Not IsNothing(ParkingButton) Then
+         ParkingButton.SetIsChecked(ParkingState)
+      End If
+   End Sub
+
+   Friend Sub ZoneStateChanged(ZoneState As Integer)
+      'Dim sFlag As String = String.Empty
+      'If ZoneState = 1 Then
+      '   sFlag = BTN_ENABLE_ZONE_1
+      'ElseIf ZoneState = 2 Then
+      '   sFlag = BTN_ENABLE_ZONE_2
+      'End If
+      'Dim EnableZoneButton As TwoStateButton = Nothing
+      'For Each MachineButton As MachineButton In m_ButtonList
+      '   If MachineButton.StateFlag = K_ENABLEZONE Then
+      '      EnableZoneButton = MachineButton
+      '   End If
+      'Next
+      'If Not IsNothing(EnableZoneButton) Then
+      '   EnableZoneButton.SetIsChecked(EnableZone)
+      'End If
+   End Sub
+
+   Friend Sub PcStateChanged(EnablePC As Boolean)
+      'Dim EnablePCButton As TwoStateButton = Nothing
+      'For Each MachineButton As MachineButton In m_ButtonList
+      '   If MachineButton.StateFlag = K_ENABLEPC Then
+      '      EnablePCButton = MachineButton
+      '   End If
+      'Next
+      'If Not IsNothing(EnablePCButton) Then
+      '   EnablePCButton.SetIsChecked(EnablePC)
+      'End If
+   End Sub
+
+
    Public Function GetPrivateProfileMachineButtons(
                          ByVal lpAppName As String,
                          ByVal lpKeyName As String,
@@ -402,6 +445,8 @@ Public MustInherit Class MachineButton
    Friend Const BTN_STATE_THREEAXIS As String = "ThreeAxis"
    Friend Const BTN_STATE_FIVEAXIS As String = "FiveAxis"
    Friend Const BTN_STATE_NOTHING As String = "Nothing"
+   Friend Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Friend Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
 
    ' Dichiarazione delle Page UserControl
    Friend Shared m_MainWindow As MainWindow = DirectCast(Application.Current.MainWindow, MainWindow)
@@ -647,6 +692,7 @@ Public Class TwoStateButton
          Return m_IsChecked
       End Get
       Set(value As Boolean)
+         ' accendo il comando, anche se dovrei aspettare di leggere lo stato da PLC
          m_IsChecked = value
          If value Then
             ExecuteMDICommand(TLuaScriptName)

DirectCuts/DirectCutPageUC.xaml

@@ -201,8 +201,8 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="4*"/>
-            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="5*"/>
+            <!--<ColumnDefinition Width="1*"/>-->
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
 
@@ -239,9 +239,11 @@
                Style="{DynamicResource OmagCut_GradientYellowIconToggleButton}">
             <!--<Image Source="{DynamicResource VacuumImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>-->
          </ToggleButton>
-         <Button Name="ManualModeBtn" Grid.Column="8"
-               Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
-            <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
+
+         <!--Comando Manula/MDI-->
+         <Button Name="ManualModeBtn" Grid.Column="7"
+                Style="{DynamicResource OmagCut_YellowGradientYellowIconButton}">
+             <Image Source="{DynamicResource ManualImg}" Style="{StaticResource OmagCut_ScaleButtonIcon}"/>
          </Button>
 
       </Grid>

DirectCuts/DirectCutPageUC.xaml.vb

@@ -133,25 +133,6 @@ Public Class DirectCutPageUC
       ' leggo il numero di assi attivi nella macchina
       Dim AxesNumber = GetPrivateProfileInt(S_AXES, K_AXESNUM, 5, m_MainWindow.GetMachIniFile())
 
-      '' leggo se è stata configurata la nuova conole
-      'If GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile()) = 1 And Not bCollapsedNewBottonsConsole Then
-      '   XYBtn.Content = "X - Y"
-      '   XYBtn.Foreground = Brushes.White
-      '   ZCBtn.Content = "Z - C"
-      '   ZCBtn.Foreground = Brushes.White
-      '   If AxesNumber < 5 Then
-      '      ZBBtn.Visibility = Windows.Visibility.Collapsed
-      '   End If
-      '   ZBBtn.Content = "Z - B"
-      '   ZBBtn.Foreground = Brushes.White
-      '   RemoteBtn.Content = "Remote"
-      '   RemoteBtn.Foreground = Brushes.White
-      'Else
-      '   XYBtn.Visibility = Windows.Visibility.Collapsed
-      '   ZCBtn.Visibility = Windows.Visibility.Collapsed
-      '   ZBBtn.Visibility = Windows.Visibility.Collapsed
-      'End If
-
    End Sub
 
    Private Sub DirectCutPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -228,8 +209,12 @@ Public Class DirectCutPageUC
       ' Se macchina fotografica abilitata
       PhotoBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO)
 
-      ' Attivo le lavorazioni solo se esiste il grezzo
+      ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
       Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
+      Dim bH1Exists As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+
+      ManualBtn.IsEnabled = bH1Exists
+      ' sviluppo rimasto in sospeso
       If m_bManulaCut Then
          ' anche se non è presente un grezzo mantengo abilitato il bottone
          SingleCutBtn.IsEnabled = True
@@ -238,10 +223,14 @@ Public Class DirectCutPageUC
       End If
       MultipleCutBtn.IsEnabled = bRawOk
       GridCutBtn.IsEnabled = bRawOk
-      SingleDrillBtn.IsEnabled = bRawOk
-      FlatteningCutBtn.IsEnabled = bRawOk
+      SingleDrillBtn.IsEnabled = (bRawOk And bH1Exists)
+      FlatteningCutBtn.IsEnabled = (bRawOk And bH1Exists)
       PolishingBtn.IsEnabled = (bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
-      SawTestBtn.IsEnabled = bRawOk
+      SawTestBtn.IsEnabled = (bRawOk And bH1Exists)
+      CopyTemplateBtn.IsEnabled = bH1Exists
+
+      ' aggiorno la visualizzazione dei parametri
+      ReloadParam()
 
       ' Nascondo i pezzi in parcheggio
       HideParkedParts()
@@ -249,6 +238,20 @@ Public Class DirectCutPageUC
 
    End Sub
 
+   Public Sub ReloadParam()
+      Dim sCurrSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sCurrSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim bSaw As Boolean = False
+
+      ' se esiste una lavorazione di lama corrente vuol dire che deve essere preferita
+      If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
+         bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
+      End If
+      m_SingleCut.SetEnableParam(bSaw)
+      m_MultipleCut.SetEnableParam(bSaw)
+      m_GridCut.SetEnableParam(bSaw)
+   End Sub
+
    Private Sub SetVisibilityJogButtuns()
       XYBtn.Visibility = Visibility.Collapsed
       ZCBtn.Visibility = Visibility.Collapsed

DirectCuts/FlatteningCut.xaml.vb

@@ -644,7 +644,8 @@ Public Class FlatteningCut
       Dim nPartId = EgtCreateGroup(GDB_ID.ROOT)
       EgtSetName(nPartId, NAME_DIRECTCUT)
       Dim nLayerId = EgtCreateGroup(nPartId)
-      EgtSetName(nLayerId, NAME_OUTLOOP)
+      ' EgtSetName(nLayerId, NAME_OUTLOOP)
+      EgtSetName(nLayerId, NAME_ONPATH)
       ' Creo il taglio
       Dim ptStart As Point3d = m_ptTipP1
       ptStart.z = 0

DirectCuts/GridCut.xaml.vb

@@ -152,6 +152,7 @@ Public Class GridCut
       EgtDraw()
    End Sub
 
+
    Friend Sub GridCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
@@ -185,6 +186,11 @@ Public Class GridCut
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      ' se macchina solo WaterJet Disabilito/Nascondo parametri della lama
+      DepthTxBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -242,6 +248,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -256,12 +268,12 @@ Public Class GridCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
          End If
@@ -285,10 +297,8 @@ Public Class GridCut
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Disegno il taglio
@@ -317,6 +327,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -331,12 +347,12 @@ Public Class GridCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
          End If
@@ -358,10 +374,8 @@ Public Class GridCut
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio

DirectCuts/MachineButtonsUC.xaml

@@ -19,7 +19,8 @@
          <ColumnDefinition Width="1*"/>
          <ColumnDefinition Width="1*"/>
          <ColumnDefinition Width="1*"/>
-      </Grid.ColumnDefinitions>
+         <ColumnDefinition Width="1*"/>
+        </Grid.ColumnDefinitions>
 
       <ToggleButton Name="MachineButton1" Grid.Column="0" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
          <Image Name="ImageButton1" Style="{StaticResource OmagCut_ButtonIcon}"/>
@@ -61,6 +62,10 @@
          <Image Name="ImageButton10" Style="{StaticResource OmagCut_ButtonIcon}"/>
       </ToggleButton>
 
-   </Grid>
+        <ToggleButton Name="MachineButton11" Grid.Column="10" Style="{DynamicResource OmagCut_ModifiedGradientYellowIconToggleButton}">
+            <Image Name="ImageButton11" Style="{StaticResource OmagCut_ButtonIcon}"/>
+        </ToggleButton>
+
+    </Grid>
 
 </UserControl>

DirectCuts/MachineButtonsUC.xaml.vb

@@ -10,7 +10,8 @@ Public Class MachineButtonsUC
    Private m_bOnlyLaser As Boolean = False
    Private m_bFirst As Boolean = True
 
-   Private Const MAX_BUTTONS As Integer = 10
+   ' 9/2 aggiunto spazio per un nuovo bottone
+   Private Const MAX_BUTTONS As Integer = 11
    Private m_nCount As Integer = 0
    Private ImageArrayY(MAX_BUTTONS - 1) As String
    Private ImageArrayN(MAX_BUTTONS - 1) As String
@@ -31,6 +32,10 @@ Public Class MachineButtonsUC
    Private Const BTN_STATE_NOTHING As String = "Nothing"
    Private Const BTN_STATE_DOOR_OPENED As String = "DoorOpened"
    Private Const BTN_STATE_DOOR_CLOSED As String = "DoorClosed"
+   Private Const BTN_STATE_PARKING As String = "Parking"
+   Private Const BTN_ENABLE_ZONE_1 As String = "EnableZone1"
+   Private Const BTN_ENABLE_ZONE_2 As String = "EnableZone2"
+   Private Const BTN_ENABLE_PC As String = "EnablePC"
 
    Public Sub New(Optional bOnlyLaser As Boolean = False)
       ' This call is required by the designer.
@@ -75,7 +80,10 @@ Public Class MachineButtonsUC
       For nIndex As Integer = 0 To m_nCount - 1
          If StateFlagArray(nIndex) = BTN_STATE_NOTHING OrElse
             StateFlagArray(nIndex) = BTN_STATE_DOOR_OPENED OrElse
-            StateFlagArray(nIndex) = BTN_STATE_DOOR_CLOSED Then
+            StateFlagArray(nIndex) = BTN_STATE_DOOR_CLOSED OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_PC OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_ZONE_1 OrElse
+            StateFlagArray(nIndex) = BTN_ENABLE_ZONE_2 Then
             ' mostra immagine fissa
             Try
                Dim s As String
@@ -134,7 +142,8 @@ Public Class MachineButtonsUC
    End Sub
 
    Private Sub MachineButton_Click(sender As Object, e As RoutedEventArgs) Handles MachineButton1.Click, MachineButton2.Click, MachineButton3.Click, MachineButton4.Click, MachineButton5.Click,
-                                                                                   MachineButton6.Click, MachineButton7.Click, MachineButton8.Click, MachineButton9.Click, MachineButton10.Click
+                                                                                   MachineButton6.Click, MachineButton7.Click, MachineButton8.Click, MachineButton9.Click, MachineButton10.Click,
+                                                                                   MachineButton11.Click
       Dim CurrentBtn As Primitives.ToggleButton = e.Source
       ' recupero l'inidce del bottone selezionato
       Dim nIndex As Integer = GetToggleButtonIndex(CurrentBtn) - 1
@@ -153,6 +162,18 @@ Public Class MachineButtonsUC
          Return
       End If
 
+      ' Se il bottone chiamantè quello per la selezione del pannello di controllo
+      If nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_PC) Then
+         Dim sTLuaFile As String = sBaseDir & CommandArrayY(nIndex)
+         Dim sFLuaFile As String = sBaseDir & CommandArrayN(nIndex)
+         If m_CN.nEnablePc = 1 Then
+            ExecuteMDICommand(CurrentBtn, sTLuaFile)
+         ElseIf m_CN.nEnablePc = 2 Then
+            ExecuteMDICommand(CurrentBtn, sFLuaFile)
+         End If
+         Return
+      End If
+
       If CurrentBtn.IsChecked() Then
          'EgtLuaExecFile(sBaseDir & CommandArrayY(nIndex))
          sLuaFileName = sBaseDir & CommandArrayY(nIndex)
@@ -344,6 +365,7 @@ Public Class MachineButtonsUC
                 " EType2=" & If(Not String.IsNullOrEmpty(EType2), CInt(EType2).ToString, ""))
    End Sub
 
+#Region "STATE CHANGED"
 
    Friend Sub SpindleStateChanged(SpindleState As Boolean)
       Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_SPINDLE)
@@ -584,6 +606,203 @@ Public Class MachineButtonsUC
       End If
    End Sub
 
+   Friend Sub ParkingStateChanged(ParkingState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_STATE_PARKING)
+      If nIndex = -1 Then Return
+      If ParkingState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
+   Friend Sub EnableZoneStateChanged(ZoneState As Integer)
+      Dim sFlag As String = String.Empty
+      If ZoneState = 1 Then
+         sFlag = BTN_ENABLE_ZONE_1
+      ElseIf ZoneState = 2 Then
+         sFlag = BTN_ENABLE_ZONE_2
+      End If
+      ' recupero il bottone che deve essere acceso (quindi spengo l'altro)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, sFlag)
+
+      ' se non trovo nessun riferimento allora spengo entrambi i comandi
+      If nIndex = -1 Then
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_1)
+         GetToggleButton(nIndex + 1).IsChecked = False
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_2)
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Return
+      End If
+
+      If ZoneState = 1 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+         ' spengo l'altro bottone (lo stato dei due bottoni sono gestiti da una sola variabile)
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_2)
+         GetToggleButton(nIndex + 1).IsChecked = False
+
+      ElseIf ZoneState = 2 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+         ' spengo l'altro bottone (lo stato dei due bottoni sono gestiti da una sola variabile)
+         nIndex = Array.IndexOf(StateFlagArray, BTN_ENABLE_ZONE_1)
+         GetToggleButton(nIndex + 1).IsChecked = False
+      End If
+   End Sub
+
+   Friend Sub EnablePcStateChanged(PcState As Integer)
+      ' il comando ButtonY accendo il Pannello_1, il comando ButtonN accendo il Pannello_2 (uno è la negazione dell'altro)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, BTN_ENABLE_PC)
+      If nIndex = -1 Then Return
+      If PcState = 1 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      ElseIf PcState = 2 Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      Else
+         ' nessuno dei due pannelli attivo
+         GetToggleButton(nIndex + 1).IsChecked = False
+      End If
+   End Sub
+
+   Friend Sub TableUpChanged(TableUpState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_TABLEUP)
+      If nIndex = -1 Then Return
+      If TableUpState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
+   Friend Sub TableDownChanged(TableDownState As Boolean)
+      Dim nIndex As Integer = Array.IndexOf(StateFlagArray, K_TABLEDOWN)
+      If nIndex = -1 Then Return
+      If TableDownState Then
+         GetToggleButton(nIndex + 1).IsChecked = True
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayY(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayY(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayY(nIndex + 1))
+         End Try
+      Else
+         GetToggleButton(nIndex + 1).IsChecked = False
+         Try
+            Dim s As String
+            If (m_MainWindow.m_OptionsPageUC.ThemesCmBx.SelectedIndex = 0) Then
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\" & ImageArrayN(nIndex)
+            Else
+               s = m_MainWindow.GetResourcesDir() & "\MachineButtonsImage\NewIcons\" & ImageArrayN(nIndex)
+            End If
+            Dim sButtonImageSource As ImageSource = ImageConverter.ConvertFromString(s)
+            GetImage(nIndex + 1).Source = sButtonImageSource
+         Catch ex As Exception
+            EgtOutLog("Error loading image " & ImageArrayN(nIndex + 1))
+         End Try
+      End If
+   End Sub
+
    '----------------- Queste funzioni determina lo stato del bottone direttamente dalla lettura delle variabili CN
    Friend Sub XYJogChanged(ByVal bXYAxes As Boolean)
       ' recupero le asscociazioni con i bottoni
@@ -619,78 +838,86 @@ Public Class MachineButtonsUC
 
    '-----------------------------------------------------------------------------------------------------------------
 
+#End Region    ' State changed
+
    Private Function GetToggleButton(ByVal nIndex As Integer) As Primitives.ToggleButton
       Select Case nIndex
-      Case 1
-         Return MachineButton1
-      Case 2
-         Return MachineButton2
-      Case 3
-         Return MachineButton3
-      Case 4
-         Return MachineButton4
-      Case 5
-         Return MachineButton5
-      Case 6
-         Return MachineButton6
-      Case 7
-         Return MachineButton7
-      Case 8
-         Return MachineButton8
-      Case 9
-         Return MachineButton9
-      Case Else
-         Return MachineButton10
+         Case 1
+            Return MachineButton1
+         Case 2
+            Return MachineButton2
+         Case 3
+            Return MachineButton3
+         Case 4
+            Return MachineButton4
+         Case 5
+            Return MachineButton5
+         Case 6
+            Return MachineButton6
+         Case 7
+            Return MachineButton7
+         Case 8
+            Return MachineButton8
+         Case 9
+            Return MachineButton9
+         Case 10
+            Return MachineButton10
+         Case Else
+            Return MachineButton11
       End Select
    End Function
 
    Private Function GetToggleButtonIndex(ByVal nBtnName As Primitives.ToggleButton) As Integer
       Select Case nBtnName.Name
-      Case MachineButton1.Name
-         Return 1
-      Case MachineButton2.Name
-         Return 2
-      Case MachineButton3.Name
-         Return 3
-      Case MachineButton4.Name
-         Return 4
-      Case MachineButton5.Name
-         Return 5
-      Case MachineButton6.Name
-         Return 6
-      Case MachineButton7.Name
-         Return 7
-      Case MachineButton8.Name
-         Return 8
-      Case MachineButton9.Name
-         Return 9
-      Case Else
-         Return 10
+         Case MachineButton1.Name
+            Return 1
+         Case MachineButton2.Name
+            Return 2
+         Case MachineButton3.Name
+            Return 3
+         Case MachineButton4.Name
+            Return 4
+         Case MachineButton5.Name
+            Return 5
+         Case MachineButton6.Name
+            Return 6
+         Case MachineButton7.Name
+            Return 7
+         Case MachineButton8.Name
+            Return 8
+         Case MachineButton9.Name
+            Return 9
+         Case MachineButton10.Name
+            Return 10
+         Case Else
+            Return 11
       End Select
    End Function
 
    Private Function GetImage(ByVal nInd As Integer) As Image
       Select Case nInd
-      Case 1
-         Return ImageButton1
-      Case 2
-         Return ImageButton2
-      Case 3
-         Return ImageButton3
-      Case 4
-         Return ImageButton4
-      Case 5
-         Return ImageButton5
-      Case 6
-         Return ImageButton6
-      Case 7
-         Return ImageButton7
-      Case 8
-         Return ImageButton8
-      Case 9
-         Return ImageButton9
-      Case Else
-         Return ImageButton10
+         Case 1
+            Return ImageButton1
+         Case 2
+            Return ImageButton2
+         Case 3
+            Return ImageButton3
+         Case 4
+            Return ImageButton4
+         Case 5
+            Return ImageButton5
+         Case 6
+            Return ImageButton6
+         Case 7
+            Return ImageButton7
+         Case 8
+            Return ImageButton8
+         Case 9
+            Return ImageButton9
+         Case 10
+            Return ImageButton10
+         Case Else
+            Return ImageButton11
       End Select
    End Function
 

DirectCuts/MultipleCut.xaml.vb

@@ -213,6 +213,10 @@ Public Class MultipleCut
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      DepthTxBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -270,6 +274,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -284,12 +294,14 @@ Public Class MultipleCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
          End If
@@ -312,10 +324,9 @@ Public Class MultipleCut
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
       ' Disegno il taglio
       CreateMultipleCut()
@@ -343,6 +354,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -357,12 +374,12 @@ Public Class MultipleCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
          End If
@@ -383,10 +400,9 @@ Public Class MultipleCut
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio

DirectCuts/SingleCutUC.xaml.vb

@@ -137,6 +137,9 @@ Public Class SingleCutUC
       Point2Btn.IsEnabled = False
       ' Deseleziono bottone primo punto
       Point1Btn.IsChecked = False
+
+      ' la visualizzazione dei comandi è gestira dalla DirectCutPageUC richiamando la funzione ReloadParam
+
       ' Aggiorno visualizzazione
       EgtDraw()
    End Sub
@@ -172,6 +175,12 @@ Public Class SingleCutUC
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      ' se macchina solo WaterJet Disabilito/Nascondo parametri della lama
+      DepthTxBx.IsEnabled = bIsSaw
+      SawThChBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -229,6 +238,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizione lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
@@ -242,12 +257,12 @@ Public Class SingleCutUC
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
          End If
@@ -271,10 +286,9 @@ Public Class SingleCutUC
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
 
       ' Disegno il taglio
@@ -303,6 +317,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
@@ -316,12 +336,14 @@ Public Class SingleCutUC
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
          End If
@@ -343,10 +365,8 @@ Public Class SingleCutUC
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio
@@ -559,9 +579,13 @@ Public Class SingleCutUC
       Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
       ' Recupero spessore lama corrente
       Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       EgtTdbSetCurrTool(sSaw)
       Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      ' se è impostata una lavorazione di lama
+      If Not String.IsNullOrEmpty(sSawing) Then
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      End If
       ' Rimuovo eventuale vecchio pezzo per taglio diretto
       EraseDirectCutPart()
       ' Disattivo eventuali lavorazioni presenti

DrawImport/DrawPageUC.xaml.vb

@@ -882,7 +882,7 @@ Public Class DrawPageUC
 
    ' permette di inserire più di un part
    Private Function MakeMultipleInsert(ByVal nNbr As Integer, sName As String) As Boolean
-      
+
       Dim InsertColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
 
       ' Imposto il contesto corrente
@@ -893,6 +893,9 @@ Public Class DrawPageUC
       ' Cancello layer regioni per selezione buchi
       Pz = EgtGetFirstGroupInGroup(GDB_ID.ROOT)
 
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As String = String.Empty
+
       While Pz <> -1
          ' imposto il contesto corrente
          EgtSetCurrentContext(DrawScene.GetCtx())
@@ -1040,6 +1043,11 @@ Public Class DrawPageUC
          EgtEraseEmptyParts()
          ' Area dei nuovi pezzi
          Dim dNewArea As Double = 0
+
+         If nNbr > 1 Then
+            sGUICode = System.Guid.NewGuid.ToString
+         End If
+
          ' Se esiste il file del pezzo
          If My.Computer.FileSystem.FileExists(sTmpFile) Then
             ' eseguo inserimento
@@ -1054,7 +1062,13 @@ Public Class DrawPageUC
                If m_bTrfData Then EgtSetInfo(nId2, "CsvPart", m_TrfOrderCode & "-" & nId2.ToString())
                ' Aggiorno l'area dei nuovi pezzi
                dNewArea += GeomCalc.GetPartArea(nId2)
-               ' Inserisco in parcheggio
+
+               ' assegno l'identificatico del pezzo, se esiste
+               If Not String.IsNullOrEmpty(sGUICode) Then
+                  Dim sPreGuid As String = CreatePreGuidCode(nId2)
+                  EgtSetInfo(nId2, INFO_REFGROUP, sPreGuid & sGUICode)
+               End If
+               ' muovo il pezzo nella prima posizione di parcheggio libera
                m_MainWindow.m_CadCutPageUC.m_NestPage.StoreOnePart(nId2, True)
 
                ' ------------------------ AGGIUNGO PEZZO NEL VEINMATCH ----------------------------------

DrawImport/ImportPageUC.xaml.vb

@@ -808,6 +808,10 @@ Public Class ImportPageUC
          EgtErase(EgtGetFirstNameInGroup(PartId, SELECT_REGION_LAYER))
          PartId = EgtGetNextPart(PartId)
       End While
+
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As New List(Of String)
+
       ' Scrivo testi per nesting
       SideAngle.WriteSideAngleForNest(ImportScene.GetCtx())
       ' Imposto riferimento sul centro geometrico di ogni pezzo
@@ -817,26 +821,53 @@ Public Class ImportPageUC
       ' Salvo tutti i pezzi in un file temporaneo
       Dim sTmpFile As String = m_MainWindow.GetTempDir() & "\FlatPart" & ".Nge"
       If Not EgtSaveFile(sTmpFile, NGE.BIN) Then Return
+
+      ' Determino numero ripetizioni
+      Dim nRepeat = 1
+      StringToInt(PartNumTxBx.Text, nRepeat)
+      nRepeat = Math.Min(Math.Max(1, nRepeat), 50)
+      ' creo il riferimento
+      If nRepeat > 1 Then
+         ' per ogni pezze del file DXF creo un gruppo
+         Dim nIdTemp As Integer = EgtGetFirstPart()
+         While nIdTemp <> GDB_ID.NULL
+            Dim sPreGuid As String = CreatePreGuidCode(nIdTemp)
+            sGUICode.Add(sPreGuid & System.Guid.NewGuid.ToString)
+            nIdTemp = EgtGetNextPart(nIdTemp)
+         End While
+      End If
+
       ' Passo al contesto principale
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Recupero flag per inserimento diretto in grezzo (altrimenti in parcheggio)
       Dim bDirect As Boolean = (GetPrivateProfileInt(S_NEST, K_DIRECT, 0, m_MainWindow.GetIniFile()) <> 0)
       ' Elimino eventuali precedenti pezzi vuoti
       EgtEraseEmptyParts()
-      ' Determino numero ripetizioni
-      Dim nRepeat = 1
-      StringToInt(PartNumTxBx.Text, nRepeat)
-      nRepeat = Math.Min(Math.Max(1, nRepeat), 50)
+
       ' Inserisco i pezzi nell'ambiente principale e recupero Id primo pezzo inserito
       Dim nFirstId As Integer = EgtGetLastPart()
       For nInd As Integer = 1 To nRepeat
          Dim nFirst2Id As Integer = EgtGetLastPart()
          EgtInsertFile(sTmpFile)
+
+         Dim FirstOfImport As Integer = EgtGetNextPart(nFirst2Id)
+         Dim Index As Integer = 1
+         While FirstOfImport <> GDB_ID.NULL And Index <= sGUICode.Count
+            If Not String.IsNullOrEmpty(sGUICode(Index - 1)) Then
+               EgtSetInfo(FirstOfImport, INFO_REFGROUP, sGUICode(Index - 1))
+               Index += 1
+            Else
+               Exit While
+            End If
+            FirstOfImport = EgtGetNextPart(FirstOfImport)
+         End While
+
          nFirst2Id = If(nFirst2Id <> GDB_ID.NULL, EgtGetNextPart(nFirst2Id), EgtGetFirstPart())
          ' Eventuale inserimento pezzi in VeinMatching
          VeinMatching.AddParts(sTmpFile, nFirst2Id)
       Next
       nFirstId = If(nFirstId <> GDB_ID.NULL, EgtGetNextPart(nFirstId), EgtGetFirstPart())
+
       ' Cancello il file
       If My.Computer.FileSystem.FileExists(sTmpFile) Then
          My.Computer.FileSystem.DeleteFile(sTmpFile)
@@ -845,7 +876,7 @@ Public Class ImportPageUC
       Dim dNewArea As Double = 0
       Dim nId As Integer = nFirstId
       While nId <> GDB_ID.NULL
-         dNewArea += GeomCalc.GetPartArea( nId)
+         dNewArea += GeomCalc.GetPartArea(nId)
          ' Passo al pezzo successivo
          nId = EgtGetNextPart(nId)
       End While
@@ -868,26 +899,26 @@ Public Class ImportPageUC
          If m_nFileType = FT.DXF Or m_nFileType = FT.NGE Then
             ' Eventuale testo per indicare il sopra
             If TopBtn.IsChecked() Then
-               Utility.AddTopToPartRegion( nRegId)
+               Utility.AddTopToPartRegion(nRegId)
             End If
             ' Se richiesti, inserisco dati Ordine, Distinta, Nome, Origine
             If m_bEnableOrderList Then
                ' Cerco il nome del pezzo
                Dim sName As String = ""
-               EgtGetName( nId, sName)
+               EgtGetName(nId, sName)
                ' Recupero il box del pezzo
-               Dim b3Reg As New BBox3d : EgtGetBBox( nRegId, GDB_BB.IGNORE_TEXT + GDB_BB.IGNORE_DIM, b3Reg)
+               Dim b3Reg As New BBox3d : EgtGetBBox(nRegId, GDB_BB.IGNORE_TEXT + GDB_BB.IGNORE_DIM, b3Reg)
                ' Aggiungo info equivalenti a CSV
                EgtSetInfo(nId, INFO_CSV_PART, sName)
                EgtSetInfo(nId, INFO_CSV_ORD, m_sOrder)
                EgtSetInfo(nId, INFO_CSV_DIST, m_sList)
                EgtSetInfo(nId, INFO_CSV_MAT, m_MainWindow.m_CurrentMachine.CurrMat.sName)
-               EgtSetInfo(nId, INFO_CSV_V1, DoubleToString( b3Reg.DimX(), 1))
-               EgtSetInfo(nId, INFO_CSV_V2, DoubleToString( b3Reg.DimY(), 1))
+               EgtSetInfo(nId, INFO_CSV_V1, DoubleToString(b3Reg.DimX(), 1))
+               EgtSetInfo(nId, INFO_CSV_V2, DoubleToString(b3Reg.DimY(), 1))
             End If
          End If
          ' Imposto colore testi
-         Utility.SetTextColor( nRegId)
+         Utility.SetTextColor(nRegId)
          ' Imposto path di provenienza
          EgtSetInfo(nId, INFO_SOU_PATH, IO.Path.Combine(m_sCurrDir, m_sCurrFile))
          ' Inserisco in parcheggio
@@ -907,7 +938,7 @@ Public Class ImportPageUC
       ' Eventuale aggiornamento VeinMatching
       VeinMatching.ZoomAll()
       ' Aggiorno Aree totale e da lavorare dei pezzi
-      m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea( dNewArea)
+      m_MainWindow.m_CurrentProjectPageUC.UpdateTotalArea(dNewArea)
       m_MainWindow.m_CurrentProjectPageUC.UpdateToProduceArea()
       m_MainWindow.m_CurrentProjectPageUC.ShowAreas()
       ' Aggiorno ambiente principale

DrawImport/InternalComponentPageUC.xaml.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports System.IO
+Imports EgtUILib
 
 Public Class InternalComponentPageUC
 
@@ -286,12 +287,22 @@ Public Class InternalComponentPageUC
          If sCompoImage.Length <> 0 Then
             Try
                Dim sPath As String = m_MainWindow.GetResourcesDir() & "\" & sCompoImage
-               sCompoImageSource = ImageConverter.ConvertFromString(sPath)
-               GetImage(index).Height = 65
-               GetImage(index).Width = 65
-               GetImage(index).Source = sCompoImageSource
-               GetLabel(index).SetValue(Grid.ColumnProperty, 1)
-               GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               If File.Exists(sPath) Then
+                  sCompoImageSource = ImageConverter.ConvertFromString(sPath)
+                  GetImage(index).Height = 65
+                  GetImage(index).Width = 65
+                  GetImage(index).Source = sCompoImageSource
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 1)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 1)
+               Else
+                  sCompoImage = String.Empty
+                  GetImage(index).Height = 0
+                  GetImage(index).Width = 0
+                  CustomThickness.Right = 0
+                  GetImage(index).Margin = CustomThickness
+                  GetLabel(index).SetValue(Grid.ColumnProperty, 0)
+                  GetLabel(index).SetValue(Grid.ColumnSpanProperty, 2)
+               End If
             Catch ex As Exception
                EgtOutLog("Error loading image " & sCompoImage)
                sCompoImage = String.Empty

DrawImport/SideAngleUc.xaml.vb

@@ -755,6 +755,10 @@ Public Class SideAngleUC
             vJoint.Add(False)
          End If
       Next
+
+      ' se non riesco a generare un elenco allora esco
+      If vJoint.Count < 1 Then Return
+
       If vJoint(0) And vJoint(vJoint.Count - 1) Then
          bJointStart = True
       End If

Machine/AlarmsPageUC.xaml.vb

@@ -437,10 +437,24 @@ Public Class AlarmsPageUC
       End If
       If m_CurrentMachine.sCurrWaterJetting <> String.Empty Then
          CurrWaterJettingTxBx.Text = m_CurrentMachine.sCurrWaterJetting
-         CurrWaterJettingQualityTxBx.Text = m_CurrentMachine.sCurrWaterJettingQuality
          CurrWaterJettingTxBl.Visibility = Windows.Visibility.Visible
          CurrWaterJettingTxBx.Visibility = Windows.Visibility.Visible
-         CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Visible
+         If m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+            CurrWaterJettingTxBx.SetValue(Grid.ColumnSpanProperty, 1)
+            CurrWaterJettingTxBx.SetValue(MarginProperty, New Thickness(CurrWaterJettingTxBx.Margin.Left,
+                                                                        CurrWaterJettingTxBx.Margin.Top,
+                                                                        5,
+                                                                        CurrWaterJettingTxBx.Margin.Bottom))
+            CurrWaterJettingQualityTxBx.Text = m_CurrentMachine.sCurrWaterJettingQuality
+            CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Visible
+         Else
+            CurrWaterJettingTxBx.SetValue(Grid.ColumnSpanProperty, 2)
+            CurrWaterJettingTxBx.SetValue(MarginProperty, New Thickness(CurrWaterJettingTxBx.Margin.Left,
+                                                                        CurrWaterJettingTxBx.Margin.Top,
+                                                                        10,
+                                                                        CurrWaterJettingTxBx.Margin.Bottom))
+            CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Collapsed
+         End If
       Else
          CurrWaterJettingTxBl.Visibility = Windows.Visibility.Hidden
          CurrWaterJettingTxBx.Visibility = Windows.Visibility.Hidden

Machine/CurrentMachine.vb

@@ -77,6 +77,9 @@ Public Class CurrentMachine
    Private m_bPolishingWheel As Boolean = False
    Private m_bWaterJet As Boolean = False
 
+   ' Abilitazione DB WaterJet
+   Private m_bFromDBWaterJet As Boolean = False
+
    ' Flag per visualizzazione TcPos, Testa/uscita e Note utente
    Private m_nShowToolChanger As Integer = 0                 ' 0=no, 1=tutti utensili, 2=solo lame
    Private m_bShowHeadExit As Boolean = False
@@ -436,6 +439,12 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property bFromDBWaterJet As Boolean
+      Get
+         Return m_bFromDBWaterJet
+      End Get
+   End Property
+
    Friend ReadOnly Property ShowToolChanger As Integer
       Get
          Return m_nShowToolChanger
@@ -1006,7 +1015,7 @@ Public Class CurrentMachine
       End Get
       Set(value As Material)
          Dim CurrMatId As String = If(Not IsNothing(value), value.nId.ToString, "")
-         If bWaterJet Then
+         If bWaterJet And bFromDBWaterJet Then
             WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId & If(Not IsNothing(value), "." & value.SubId, ""), sMachIniFile)
          Else
             WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId, sMachIniFile)
@@ -1108,6 +1117,8 @@ Public Class CurrentMachine
       ' waterjet
       m_bWaterJet = (GetPrivateProfileInt(S_TOOLS, K_WATERJET, 0, sMachIniFile) > 0) And
                     m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.ENABLE_WJ)
+      ' Leggo abilitazione DB WaterJet
+      m_bFromDBWaterJet = (GetPrivateProfileInt(S_MATERIALS, K_FROMDBWATERJET, 0, sMachIniFile) > 0)
       ' Leggo abilitazione visualizzazione TcPos, Head/exit e Note utente
       m_nShowToolChanger = GetPrivateProfileInt(S_TOOLS, K_SHOWTOOLCHANGER, 0, sMachIniFile)
       m_bShowHeadExit = (GetPrivateProfileInt(S_TOOLS, K_SHOWHEADEXIT, 0, sMachIniFile) > 0)
@@ -1247,7 +1258,7 @@ Public Class CurrentMachine
       Dim Material As Material = Nothing
       Dim nIndex As Integer = 1
 
-      If m_bWaterJet Then
+      If m_bWaterJet And m_bFromDBWaterJet Then
          LoadWJMaterial(True)
       Else
          While (GetPrivateProfileMaterial(S_MATERIALS, K_MATERIAL & nIndex, Material, sMachIniFile))
@@ -1262,7 +1273,7 @@ Public Class CurrentMachine
       ' Leggo materiale correntemente attivo
       Dim sCurrMatId As String = String.Empty
       EgtUILib.GetPrivateProfileString(S_MATERIALS, K_CURRMATERIAL, "0", sCurrMatId, sMachIniFile)
-      If bWaterJet Then
+      If bWaterJet And bFromDBWaterJet Then
          Dim sCurrMatIds As String()
          sCurrMatIds = sCurrMatId.Split("."c)
          If sCurrMatIds.Length > 1 Then
@@ -1303,7 +1314,6 @@ Public Class CurrentMachine
       Local_MaterialList = EgtWPFLib5.WaterjetDbWindowVM.LoadWjMaterials(sFilePath)
       ' definisco la lista delle qualità (solo se è vuota)
       If m_Qualities.Count < 1 Then
-         m_Qualities.Add("")
          m_Qualities.Add("Q1")
          m_Qualities.Add("Q2")
          m_Qualities.Add("Q3")

Machine/MachinePageUC.xaml.vb

@@ -64,7 +64,7 @@ Public Class MachinePageUC
          PolishingsBtn.IsEnabled = False
       End If
 
-      If Not m_MainWindow.m_CurrentMachine.bWaterJet Then
+      If Not m_MainWindow.m_CurrentMachine.bWaterJet Or Not m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
          WaterJetBtn.IsEnabled = False
       End If
 

Machine/MachiningDbPageUC.xaml.vb

@@ -339,7 +339,7 @@ Public Class MachiningDbPageUC
          Next
          MachiningToExportList.Add(ImpExpMachiningFamily)
       Next
-      Dim ExportWndVM As New ImportExportMachiningWindowVM(MachiningToExportList)
+      Dim ExportWndVM As New ImportExportMachiningWindowVM(MachiningToExportList, true)
       Dim ExportWnd As New ImportExportMachiningWindowWD(Application.Current.MainWindow, ExportWndVM)
 
       ExportWnd.ShowDialog()
@@ -396,7 +396,7 @@ Public Class MachiningDbPageUC
             MachinigToImportList.Add(NewFamily)
          End If
       Next
-      Dim ImportWndVM As New ImportExportMachiningWindowVM(MachinigToImportList, ImportFilePath, ImportFileMachiningNameList)
+      Dim ImportWndVM As New ImportExportMachiningWindowVM(MachinigToImportList, False, ImportFilePath, ImportFileMachiningNameList)
       Dim ImportWnd As New ImportExportMachiningWindowWD(Application.Current.MainWindow, ImportWndVM)
 
       ImportWnd.ShowDialog()
@@ -552,12 +552,15 @@ Public Class MachiningDbPageUC
       HeadSideCmBx.SelectedIndex = ToolInt - 1
       EgtMdbGetCurrMachiningParam(MCH_MP.LEADINTYPE, ToolInt)
       If LeadInTypeCmBx.Items.Count > 0 Then
-         LeadInTypeCmBx.SelectedItem =  LeadInTypeCmBx.Items(0)
+         LeadInTypeCmBx.SelectedItem = LeadInTypeCmBx.Items(0)
       Else
          LeadInTypeCmBx.SelectedItem = Nothing
       End If
       For Each LInType As IdNameStruct In LeadInTypeCmBx.Items
-         If ToolInt = LInType.Id Then LeadInTypeCmBx.SelectedItem = LInType
+         If ToolInt = LInType.Id Then
+            LeadInTypeCmBx.SelectedItem = LInType
+            Exit For
+         End If
       Next
       EgtMdbGetCurrMachiningParam(MCH_MP.EXTLINKTYPE, ToolInt)
       ExtLinkTypeCmBx.SelectedIndex = ToolInt
@@ -705,7 +708,7 @@ Public Class MachiningDbPageUC
       ' Lista materiali
       m_MaterialsList.Clear()
       For Each Material As Material In m_MainWindow.m_CurrentMachine.Materials
-         If m_MainWindow.m_CurrentMachine.bWaterJet Then
+         If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
             m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName, Material.SubId))
          Else
             m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName))
@@ -720,7 +723,7 @@ Public Class MachiningDbPageUC
             Dim SubParam() As String = Param(0).Split(".".ToCharArray)
             Dim nParId As Integer = 0
             Dim nSubParId As Integer = 0
-            If m_MainWindow.m_CurrentMachine.bWaterJet Then
+            If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
                If StringToInt(SubParam(0), nParId) AndAlso nParId = Material.nId AndAlso SubParam.Count > 1 AndAlso
                   StringToInt(SubParam(1), nSubParId) AndAlso nSubParId = Material.nSubId Then
 
@@ -819,13 +822,13 @@ Public Class MachiningDbPageUC
       ' Parmetri nascosti di svuotatura
       If nMachiningType = MCH_MY.POCKETING Then
          EgtMdbSetCurrMachiningParam(MCH_MP.SUBTYPE, MCH_POCK_SUB.SPIRALOUT)
-         EgtMdbSetCurrMachiningParam( MCH_MP.LEADINTYPE, MCH_POCK_LI.HELIX)
+         ' EgtMdbSetCurrMachiningParam( MCH_MP.LEADINTYPE, MCH_POCK_LI.HELIX)
          Dim dToolDiam As Double = 100
          If Not IsNothing(ToolCmBx.SelectedItem) Then
             EgtTdbSetCurrTool( ToolCmBx.SelectedItem.ToString())
             EgtTdbGetCurrToolParam( MCH_TP.DIAM, dToolDiam)
          End If
-         EgtMdbSetCurrMachiningParam( MCH_MP.LITANG, 0.495 * dToolDiam)
+         EgtMdbSetCurrMachiningParam(MCH_MP.LITANG, 0.99 * dToolDiam)
          EgtMdbSetCurrMachiningParam( MCH_MP.LIELEV, 2.0)
       End If
       ' Parametri WaterJetting
@@ -894,7 +897,7 @@ Public Class MachiningDbPageUC
       ' Scrivo stringa materiali da lista
       Dim sMaterialString As String = String.Empty
       For Each Material As MachiningMaterial In m_MaterialsList
-         If m_MainWindow.m_CurrentMachine.bWaterJet Then
+         If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
             If Material.bIsActive Then
                sMaterialString += Material.nId.ToString & "." & Material.nSubId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
             End If
@@ -1138,30 +1141,26 @@ Public Class MachiningDbPageUC
             ' Definizione della grid TypeGrd con la giusta altezza e numero di righe
             Dim RowNum As Integer = TypeGrd.RowDefinitions.Count
             If RowNum > 2 Then
+               ' elimino eventuali righe in eccesso
                For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
             ElseIf RowNum < 2 Then
                ' costruiso una riga in più da inserire
                Dim Row As New RowDefinition
                TypeGrd.RowDefinitions.Add(Row)
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
             End If
+            LeadInTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 0)
+            LeadInTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
+            LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
+            TypeBrd.SetValue(Grid.RowProperty, 12)
+            TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+
             LeadInTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadInTypeCmBx.Visibility = Windows.Visibility.Visible
             ExtLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
@@ -1779,7 +1778,7 @@ Public Class MachiningDbPageUC
             StepTypeTxBl.Visibility = Windows.Visibility.Hidden
             StepTypeCmBx.Visibility = Windows.Visibility.Hidden
             SideBrd.SetValue(Grid.RowProperty, 9)
-            SideBrd.Visibility = Windows.Visibility.Visible
+            SideBrd.Visibility = Windows.Visibility.Hidden
             WorkSideTxBl.Visibility = Windows.Visibility.Hidden
             WorkSideCmBx.Visibility = Windows.Visibility.Hidden
             HeadSideTxBl.Visibility = Windows.Visibility.Hidden
@@ -1791,15 +1790,22 @@ Public Class MachiningDbPageUC
                For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+            ElseIf RowNum < 2 Then
+               ' costruiso una riga in più da inserire
+               Dim Row As New RowDefinition
+               TypeGrd.RowDefinitions.Add(Row)
             End If
+            LeadInTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 0)
+            LeadInTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
+            LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
+            TypeBrd.SetValue(Grid.RowProperty, 12)
+            TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+
             LeadInTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadInTypeCmBx.Visibility = Windows.Visibility.Visible
             ExtLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
@@ -2285,7 +2291,7 @@ Public Class MachiningDbPageUC
    Private Sub MaxThicknessTxBx_EgtClosed(sender As Object, e As EventArgs) Handles MaxThicknessTxBx.EgtClosed
       Dim SelectedMaterial As MachiningMaterial = MaterialsList.SelectedItem
       Dim dMaxThick As Double = 0
-      If m_MainWindow.m_CurrentMachine.bWaterJet Then
+      If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
          ' solo per water jet controllo lo spessore massimo ammissibile
          dMaxThick = m_MainWindow.m_CurrentMachine.GetMaxThicknessCurrMaterial(SelectedMaterial.Name)
          Dim dVal As Double
@@ -2369,7 +2375,6 @@ Public Class MachiningDbPageUC
          Case MCH_MY.POCKETING
             LeadInTypeCmBx.ItemsSource = New ObservableCollection(Of IdNameStruct)(
                                           {New IdNameStruct(MCH_POCK_LI.NONE, EgtMsg(MSG_COMBOBOXPARAM + 42)),
-                                           New IdNameStruct(MCH_POCK_LI.GLIDE, EgtMsg(MSG_COMBOBOXPARAM + 48)),
                                            New IdNameStruct(MCH_POCK_LI.ZIGZAG, EgtMsg(MSG_COMBOBOXPARAM + 38)),
                                            New IdNameStruct(MCH_POCK_LI.HELIX, EgtMsg(MSG_COMBOBOXPARAM + 49))})
             LeadOutTypeCmBx.ItemsSource = New ObservableCollection(Of IdNameStruct)(

Machine/PolishingsPageUC.xaml

@@ -158,6 +158,9 @@
                                 <ColumnDefinition Width="2*"/>
                                 <ColumnDefinition Width="2*"/>
                                 <ColumnDefinition Width="2*"/>
+                                <ColumnDefinition Width="2*"/>
+                                <ColumnDefinition Width="2*"/>
+                                
                             </Grid.ColumnDefinitions>
                             <Grid.RowDefinitions>
                                 <RowDefinition Height="0.5*"/>
@@ -165,10 +168,12 @@
                                 <RowDefinition Height="1*"/>
                                 <RowDefinition Height="1*"/>
                                 <RowDefinition Height="1*"/>
+                                <RowDefinition Height="1*"/>
                                 <RowDefinition Height="0.5*"/>
 
                             </Grid.RowDefinitions>
 
+                    <!--Decrizione immagini-->        
                     <Border Grid.Row="1" Grid.Column="1" Margin="10">
                         <Image Source="../Resources/Contour.png" Stretch="Uniform"/>
                     </Border>
@@ -178,24 +183,45 @@
                     <Border Grid.Row="3" Grid.Column="1" Margin="10">
                         <Image Source="../Resources/ZigZagY.png" Stretch="Uniform"/>
                     </Border>
+                    <Border Grid.Row="4" Grid.Column="1" Margin="10">
+                        <Image Source="../Resources/Spiral.png" Stretch="Uniform"/>
+                    </Border>
 
-                    <TextBlock Name="MotionTxBl" Grid.Row="0" Grid.Column="1" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
-                    <TextBlock Name="RepeatTxBl" Grid.Row="0" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
-                    <TextBlock Name="StepTxBl" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
-                    <TextBlock Name="OffSetTxBl" Grid.Row="0" Grid.Column="4" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="30,0" HorizontalAlignment="Center"/>
+                            <!--Titolazione colonne-->
+                    <TextBlock Name="MotionTxBl" Grid.Row="0" Grid.Column="1" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="RepeatTxBl" Grid.Row="0" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="StepTxBl" Grid.Row="0" Grid.Column="3" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="OffSetTxBl" Grid.Row="0" Grid.Column="4" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="RadiusTxBl" Grid.Row="0" Grid.Column="5" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
+                    <TextBlock Name="DistanceTxBl" Grid.Row="0" Grid.Column="6" Style="{DynamicResource OmagCut_ToolsDBTextBlock}" Margin="5,0" HorizontalAlignment="Center"/>
 
-                    <EgtWPFLib:EgtTextBox Name="ContourTxBx" Grid.Row="1" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="OffContourTxBx" Grid.Row="1" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                    <!--Contornatura-->
+                    <EgtWPFLib:EgtTextBox Name="ContourTxBx" Grid.Row="1" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffContourTxBx" Grid.Row="1" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
                             
-                    <EgtWPFLib:EgtTextBox Name="ZigZagXTxBx" Grid.Row="2" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="StepXTxBx" Grid.Row="2" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="OffZigZagXTxBx" Grid.Row="2" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-
-                    <EgtWPFLib:EgtTextBox Name="ZigZagYTxBx" Grid.Row="3" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="StepYTxBx" Grid.Row="3" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
-                    <EgtWPFLib:EgtTextBox Name="OffZigZagYTxBx" Grid.Row="3" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                    <!--Cammino orizzontale X-->
+                    <EgtWPFLib:EgtTextBox Name="ZigZagXTxBx" Grid.Row="2" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="StepXTxBx" Grid.Row="2" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffZigZagXTxBx" Grid.Row="2" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="RadiusXTxBx" Grid.Row="2" Grid.Column="5" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
+                    <EgtWPFLib:EgtTextBox Name="DistanceXTxBx" Grid.Row="2" Grid.Column="6" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
                             
-                    <GroupBox Name="LiLoGpBx" Grid.Row="4" Grid.Column="1" Grid.RowSpan="2" Grid.ColumnSpan="3" Style="{DynamicResource OmagCut_GroupBox}">
+                    <!--Cammino verticale Y-->
+                    <EgtWPFLib:EgtTextBox Name="ZigZagYTxBx" Grid.Row="3" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="StepYTxBx" Grid.Row="3" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffZigZagYTxBx" Grid.Row="3" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="RadiusYTxBx" Grid.Row="3" Grid.Column="5" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
+                    <EgtWPFLib:EgtTextBox Name="DistanceYTxBx" Grid.Row="3" Grid.Column="6" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0" Visibility="Collapsed"/>
+                            
+                    <!--Cammino a spirale-->
+                    <EgtWPFLib:EgtTextBox Name="SpiralTxBx" Grid.Row="4" Grid.Column="2" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="StepSpiralTxBx" Grid.Row="4" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="OffSpiralTxBx" Grid.Row="4" Grid.Column="4" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="RadiusSpiralTxBx" Grid.Row="4" Grid.Column="5" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+                    <EgtWPFLib:EgtTextBox Name="DistanceSpiralTxBx" Grid.Row="4" Grid.Column="6" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
+
+                            <!--Parametri di lavoro condivisi-->
+                    <GroupBox Name="LiLoGpBx" Grid.Row="5" Grid.Column="1" Grid.RowSpan="2" Grid.ColumnSpan="5" Style="{DynamicResource OmagCut_GroupBox}">
                         <Grid Name="LiLoGrd">
                             <Grid.ColumnDefinitions>
                                 <ColumnDefinition Width="2*"/>
@@ -212,11 +238,11 @@
                            </Grid.RowDefinitions>
 
                             <TextBlock Name="LiLenTxBl" Grid.Row="1" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                            <EgtWPFLib:EgtTextBox Name="LiLenTxBx" Grid.Row="1" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                            <EgtWPFLib:EgtTextBox Name="LiLenTxBx" Grid.Row="1" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
                             <TextBlock Name="LiHeightTxBl" Grid.Row="1" Grid.Column="2" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                            <EgtWPFLib:EgtTextBox Name="LiHeightTxBx" Grid.Row="1" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                            <EgtWPFLib:EgtTextBox Name="LiHeightTxBx" Grid.Row="1" Grid.Column="3" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
                             <TextBlock Name="LiLoadTxBl" Grid.Row="3" Grid.Column="0" Style="{DynamicResource OmagCut_ToolsDBTextBlock}"/>
-                            <EgtWPFLib:EgtTextBox Name="LiLoadTxBx" Grid.Row="3" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="30,0"/>
+                            <EgtWPFLib:EgtTextBox Name="LiLoadTxBx" Grid.Row="3" Grid.Column="1" Style="{DynamicResource OmagCut_CalculatorTextBox}" Margin="10,0"/>
 
                         </Grid>
                     </GroupBox>

Machine/PolishingsPageUC.xaml.vb

@@ -61,6 +61,8 @@ Public Class PolishingsPageUC
       RepeatTxBl.Text = EgtMsg(91093)             ' Ripetizioni
       StepTxBl.Text = EgtMsg(90787)               ' Passo
       OffSetTxBl.Text = EgtMsg(91089)             ' Offset
+      RadiusTxBl.Text = "Raggio"
+      DistanceTxBl.Text = "Distanza"
       LiLoGpBx.Header = EgtMsg(91094)             ' Attacco/Uscita
       LiLenTxBl.Text = EgtMsg(91097)              ' Lunghezza
       LiHeightTxBl.Text = EgtMsg(91095)           ' Altezza
@@ -452,7 +454,9 @@ Public Class PolishingsPageUC
                   If KitMachItem.m_IsModifiedId OrElse KitMachItem.m_IsModifiedToolUUID OrElse KitMachItem.m_IsModifiedToolName OrElse KitMachItem.m_IsModifiedSelTool OrElse
                      KitMachItem.m_IsModifiedActive OrElse KitMachItem.m_IsModifiedContour OrElse KitMachItem.m_IsModifiedOffCnt OrElse KitMachItem.m_IsModifiedZigZagX OrElse
                      KitMachItem.m_IsModifiedOffZigZagX OrElse KitMachItem.m_IsModifiedZigZagY OrElse KitMachItem.m_IsModifiedStepX OrElse KitMachItem.m_IsModifiedStepY OrElse
-                     KitMachItem.m_IsModifiedOffZigZagY OrElse KitMachItem.m_IsModifiedLiLen OrElse KitMachItem.m_IsModifiedLiHeight OrElse KitMachItem.m_IsModifiedLiLoad Then
+                     KitMachItem.m_IsModifiedOffZigZagY OrElse KitMachItem.m_IsModifiedSpiral OrElse KitMachItem.m_IsModifiedOffSpiral OrElse KitMachItem.m_IsModifiedStepSpiral OrElse
+                     KitMachItem.m_IsModifiedRadiusSpiral OrElse KitMachItem.m_IsModifiedDistanceSpiral OrElse KitMachItem.m_IsModifiedLiLen OrElse KitMachItem.m_IsModifiedLiHeight OrElse
+                     KitMachItem.m_IsModifiedLiLoad Then
                      Return True
                   End If
                Next
@@ -476,10 +480,19 @@ Public Class PolishingsPageUC
             KitMachItem.m_IsModifiedOffCnt = False
             KitMachItem.m_IsModifiedZigZagX = False
             KitMachItem.m_IsModifiedOffZigZagX = False
+            KitMachItem.m_IsModifiedRadiusX = False
+            KitMachItem.m_IsModifiedDistanceX = False
             KitMachItem.m_IsModifiedZigZagY = False
             KitMachItem.m_IsModifiedOffZigZagY = False
+            KitMachItem.m_IsModifiedRadiusY = False
+            KitMachItem.m_IsModifiedDistanceY = False
+            KitMachItem.m_IsModifiedSpiral = False
+            KitMachItem.m_IsModifiedOffSpiral = False
+            KitMachItem.m_IsModifiedRadiusSpiral = False
+            KitMachItem.m_IsModifiedDistanceSpiral = False
             KitMachItem.m_IsModifiedStepX = False
             KitMachItem.m_IsModifiedStepY = False
+            KitMachItem.m_IsModifiedStepSpiral = False
             KitMachItem.m_IsModifiedLiLen = False
             KitMachItem.m_IsModifiedLiHeight = False
             KitMachItem.m_IsModifiedLiLoad = False
@@ -493,20 +506,29 @@ Public Class PolishingsPageUC
       OffContourTxBx.Text = LenToString(kmShow.dOffsetCnt, 3)
       ZigZagXTxBx.Text = kmShow.nZigZagX.ToString()
       OffZigZagXTxBx.Text = LenToString(kmShow.dOffZigZagX, 3)
-      StepXTxBx.Text = LenToString( kmShow.dStepX, 3)
+      StepXTxBx.Text = LenToString(kmShow.dStepX, 3)
+      RadiusXTxBx.Text = LenToString(kmShow.dRadiusX, 3)
+      DistanceXTxBx.Text = LenToString(kmShow.dDistanceX, 3)
       ZigZagYTxBx.Text = kmShow.nZigZagY.ToString()
       OffZigZagYTxBx.Text = LenToString(kmShow.dOffZigZagY, 3)
-      StepYTxBx.Text = LenToString( kmShow.dStepY, 3)
-      LiLenTxBx.Text = LenToString( kmShow.dLiLen, 3)
-      LiHeightTxBx.Text = LenToString( kmShow.dLiHeight, 3)
-      LiLoadTxBx.Text = LenToString( kmShow.dLiLoad, 3)
+      StepYTxBx.Text = LenToString(kmShow.dStepY, 3)
+      RadiusYTxBx.Text = LenToString(kmShow.dRadiusY, 3)
+      DistanceYTxBx.Text = LenToString(kmShow.dDistanceY, 3)
+      SpiralTxBx.Text = kmShow.nSpiral.ToString()
+      StepSpiralTxBx.Text = LenToString(kmShow.dStepSpiral, 3)
+      OffSpiralTxBx.Text = LenToString(kmShow.dOffSpiral, 3)
+      RadiusSpiralTxBx.Text = LenToString(kmShow.dRadiusSpiral, 3)
+      DistanceSpiralTxBx.Text = LenToString(kmShow.dDistanceSpiral, 3)
+      LiLenTxBx.Text = LenToString(kmShow.dLiLen, 3)
+      LiHeightTxBx.Text = LenToString(kmShow.dLiHeight, 3)
+      LiLoadTxBx.Text = LenToString(kmShow.dLiLoad, 3)
    End Sub
 
    Private Sub KitMachsLstBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs) Handles KitMachsLstBx.SelectionChanged
       Dim SelectedKitMach As KitMach = KitMachsLstBx.SelectedItem
       If Not IsNothing(SelectedKitMach) Then
          ' visualizzo i parametri relativi al KitMach selezionato
-         ShowKitMach( SelectedKitMach)
+         ShowKitMach(SelectedKitMach)
       End If
    End Sub
 
@@ -520,14 +542,16 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub OffContourTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffContourTxBx.EgtClosed
-      Dim nTemp As Integer = 0
+      Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
-         nTemp = OffContourTxBx.Text
-         KitMachsLstBx.SelectedItem.dOffsetCnt = nTemp
-         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffsetCnt = nTemp
+         StringToLen(OffContourTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffsetCnt = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffsetCnt = dTemp
       End If
    End Sub
 
+#Region "ZigZag X"
+
    Private Sub ZigZagXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ZigZagXTxBx.EgtClosed
       Dim nTemp As Integer = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
@@ -538,11 +562,11 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub OffZigZagXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffZigZagXTxBx.EgtClosed
-      Dim nTemp As Integer = 0
+      Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
-         nTemp = OffZigZagXTxBx.Text
-         KitMachsLstBx.SelectedItem.dOffZigZagX = nTemp
-         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagX = nTemp
+         StringToLen(OffZigZagXTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffZigZagX = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagX = dTemp
       End If
    End Sub
 
@@ -555,6 +579,28 @@ Public Class PolishingsPageUC
       End If
    End Sub
 
+   Private Sub RadiusXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RadiusXTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(RadiusXTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dRadiusX = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dRadiusX = dTemp
+      End If
+   End Sub
+
+   Private Sub DistanceXTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DistanceXTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(DistanceXTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dDistanceX = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dDistanceX = dTemp
+      End If
+   End Sub
+
+#End Region  ' ZigZag X
+
+#Region "ZizZag Y"
+
    Private Sub ZigZagYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles ZigZagYTxBx.EgtClosed
       Dim nTemp As Integer = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
@@ -565,11 +611,11 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub OffZigZagYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffZigZagYTxBx.EgtClosed
-      Dim nTemp As Integer = 0
+      Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
-         nTemp = OffZigZagYTxBx.Text
-         KitMachsLstBx.SelectedItem.dOffZigZagY = nTemp
-         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagY = nTemp
+         StringToLen(OffZigZagYTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffZigZagY = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffZigZagY = dTemp
       End If
    End Sub
 
@@ -582,6 +628,75 @@ Public Class PolishingsPageUC
       End If
    End Sub
 
+   Private Sub RadiusYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RadiusYTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(RadiusYTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dRadiusY = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dRadiusY = dTemp
+      End If
+   End Sub
+
+   Private Sub DistanceYTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DistanceYTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(DistanceYTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dDistanceY = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dDistanceY = dTemp
+      End If
+   End Sub
+
+#End Region    ' ZigZagY
+
+#Region "Spirale"
+
+   Private Sub SpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles SpiralTxBx.EgtClosed
+      Dim nTemp As Integer = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         nTemp = SpiralTxBx.Text
+         KitMachsLstBx.SelectedItem.nSpiral = nTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).nSpiral = nTemp
+      End If
+   End Sub
+
+   Private Sub OffSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles OffSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(OffSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dOffSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dOffSpiral = dTemp
+      End If
+   End Sub
+
+   Private Sub StepSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles StepSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(StepSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dStepSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dStepSpiral = dTemp
+      End If
+   End Sub
+
+   Private Sub RadiusSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles RadiusSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(RadiusSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dRadiusSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dRadiusSpiral = dTemp
+      End If
+   End Sub
+
+   Private Sub DistanceSpiralTxBx_EgtClosed(sender As Object, e As EventArgs) Handles DistanceSpiralTxBx.EgtClosed
+      Dim dTemp As Double = 0
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
+         StringToLen(DistanceSpiralTxBx.Text, dTemp)
+         KitMachsLstBx.SelectedItem.dDistanceSpiral = dTemp
+         m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).dDistanceSpiral = dTemp
+      End If
+   End Sub
+
+#End Region  ' Spirale
+
    Private Sub LiLenTxBx_EgtClosed(sender As Object, e As EventArgs) Handles LiLenTxBx.EgtClosed
       Dim dTemp As Double = 0
       If Not IsNothing(KitMachsLstBx.SelectedItem) Then
@@ -616,11 +731,11 @@ Public Class PolishingsPageUC
    End Sub
 
    Private Sub ToolCmBx_SelectionChanged(sender As Object, e As SelectionChangedEventArgs)
-      If Not IsNothing( KitMachsLstBx.SelectedItem) Then
+      If Not IsNothing(KitMachsLstBx.SelectedItem) Then
          m_OldItem.KitMachList(KitMachsLstBx.SelectedItem.nId - 1).SelTool = KitMachsLstBx.SelectedItem.SelTool
-         If KitMachsLstBx.SelectedItem.SelTool >= 0 then
-            KitMachsLstBx.SelectedItem.sToolName = m_ToolList( KitMachsLstBx.SelectedItem.SelTool)
-            KitMachsLstBx.SelectedItem.sToolUUID = m_ToolUuidList( KitMachsLstBx.SelectedItem.SelTool)
+         If KitMachsLstBx.SelectedItem.SelTool >= 0 Then
+            KitMachsLstBx.SelectedItem.sToolName = m_ToolList(KitMachsLstBx.SelectedItem.SelTool)
+            KitMachsLstBx.SelectedItem.sToolUUID = m_ToolUuidList(KitMachsLstBx.SelectedItem.SelTool)
          Else
             KitMachsLstBx.SelectedItem.sToolName = "---"
             KitMachsLstBx.SelectedItem.sToolUUID = "---"
@@ -630,143 +745,176 @@ Public Class PolishingsPageUC
       End If
    End Sub
 
-   Private Function ReadKitName( nKitIndex As Integer) As String
+   Private Function ReadKitName(nKitIndex As Integer) As String
       ' Leggo il nome del kit
       Dim sKey As String = K_KIT & nKitIndex.ToString("D2")
       Dim sName As String = ""
-      GetPrivateProfileString( S_HEADER, sKey, "", sName, m_sKitFile)
+      GetPrivateProfileString(S_HEADER, sKey, "", sName, m_sKitFile)
       Return sName
    End Function
-   
-   Private Function ReadKit( nKitIndex As Integer, removeFlag As Boolean, ByRef Kit As Kit) As Boolean
+
+   Private Function ReadKit(nKitIndex As Integer, removeFlag As Boolean, ByRef Kit As Kit) As Boolean
       ' Leggo il nome del kit
-      Dim sName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sName) Then Return False
+      Dim sName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sName) Then Return False
       ' Creo il kit
-      Kit = New Kit( If( removeFlag, nKitIndex - 1, nKitIndex), sName)
+      Kit = New Kit(If(removeFlag, nKitIndex - 1, nKitIndex), sName)
       ' Leggo le sue lavorazioni
       For nkitMachIndex As Integer = 1 To 100
          Dim kmItem As KitMach = Nothing
-         if ReadKitMach( sName, nkitMachIndex, kmItem) Then
-            Kit.AddKitMach( kmItem)
+         If ReadKitMach(sName, nkitMachIndex, kmItem) Then
+            Kit.AddKitMach(kmItem)
          Else
             Exit For
          End If
       Next
       ' Se non sono state trovate lavorazioni, ne aggiungo una standard
       If Kit.KitMachList.Count() = 0 Then
-         Kit.AddKitMach( New KitMach( 1))
+         Kit.AddKitMach(New KitMach(1))
       End If
       Return True
    End Function
 
-   Private Function ReadKitMach( sKitName As String, nKitMachIndex As Integer, ByRef kmItem As KitMach) As Boolean
+   Private Function ReadKitMach(sKitName As String, nKitMachIndex As Integer, ByRef kmItem As KitMach) As Boolean
       ' Verifico esistenza lavorazione del kit
       Dim sSect As String = S_KIT & "." & sKitName
-      Dim sKeyInd As String = nkitMachIndex.ToString("D2") & "."
+      Dim sKeyInd As String = nKitMachIndex.ToString("D2") & "."
       Dim sName As String = ""
-      If GetPrivateProfileString( sSect, sKeyInd & K_TOOLNAME, "", sName, m_sKitFile) = 0 Then Return False
+      If GetPrivateProfileString(sSect, sKeyInd & K_TOOLNAME, "", sName, m_sKitFile) = 0 Then Return False
       ' Lettura completa
       kmItem = New KitMach
       kmItem.sToolName = sName
-      kmItem.nId = nkitMachIndex
-      GetPrivateProfileString( sSect, sKeyInd & K_TOOL, "", kmItem.sToolUUID, m_sKitFile)
-      kmItem.bActive = ( GetPrivateProfileInt( sSect, sKeyInd & K_ACTIVE, 0, m_sKitFile) = 1)
+      kmItem.nId = nKitMachIndex
+      GetPrivateProfileString(sSect, sKeyInd & K_TOOL, "", kmItem.sToolUUID, m_sKitFile)
+      kmItem.bActive = (GetPrivateProfileInt(sSect, sKeyInd & K_ACTIVE, 0, m_sKitFile) = 1)
       kmItem.nContour = GetPrivateProfileInt(sSect, sKeyInd & K_CONTOUR, 0, m_sKitFile)
-      kmItem.dOffsetCnt = GetPrivateProfileInt(sSect, sKeyInd & K_OFFSETCNT, 0, m_sKitFile)
+      kmItem.dOffsetCnt = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFSETCNT, 0, m_sKitFile)
       kmItem.nZigZagX = GetPrivateProfileInt(sSect, sKeyInd & K_ZIGZAGX, 0, m_sKitFile)
-      kmItem.dOffZigZagX = GetPrivateProfileInt(sSect, sKeyInd & K_OFFZIGZAGX, 0, m_sKitFile)
+      kmItem.dOffZigZagX = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFZIGZAGX, 0, m_sKitFile)
       kmItem.dStepX = GetPrivateProfileDouble(sSect, sKeyInd & K_STEPX, 0, m_sKitFile)
+      kmItem.dRadiusX = GetPrivateProfileDouble(sSect, sKeyInd & K_RADIUSX, 0, m_sKitFile)
+      kmItem.dDistanceX = GetPrivateProfileDouble(sSect, sKeyInd & K_DISTANCEX, 0, m_sKitFile)
       kmItem.nZigZagY = GetPrivateProfileInt(sSect, sKeyInd & K_ZIGZAGY, 0, m_sKitFile)
-      kmItem.dOffZigZagY = GetPrivateProfileInt(sSect, sKeyInd & K_OFFZIGZAGY, 0, m_sKitFile)
-      kmItem.dStepY = GetPrivateProfileDouble( sSect, sKeyInd & K_STEPY, 0, m_sKitFile)
-      kmItem.dLiLen = GetPrivateProfileDouble( sSect, sKeyInd & K_LILEN, 0, m_sKitFile)
-      kmItem.dLiHeight = GetPrivateProfileDouble( sSect, sKeyInd & K_LIHEIGHT, 0, m_sKitFile)
-      kmItem.dLiLoad = GetPrivateProfileDouble( sSect, sKeyInd & K_LILOAD, 0, m_sKitFile)
+      kmItem.dOffZigZagY = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFZIGZAGY, 0, m_sKitFile)
+      kmItem.dStepY = GetPrivateProfileDouble(sSect, sKeyInd & K_STEPY, 0, m_sKitFile)
+      kmItem.dRadiusY = GetPrivateProfileDouble(sSect, sKeyInd & K_RADIUSY, 0, m_sKitFile)
+      kmItem.dDistanceY = GetPrivateProfileDouble(sSect, sKeyInd & K_DISTANCEY, 0, m_sKitFile)
+
+      kmItem.nSpiral = GetPrivateProfileInt(sSect, sKeyInd & K_SPIRAL, 0, m_sKitFile)
+      kmItem.dOffSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_OFFSPIRAL, 0, m_sKitFile)
+      kmItem.dStepSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_STEPSPIRAL, 0, m_sKitFile)
+      kmItem.dRadiusSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_RADIUSSPIRAL, 0, m_sKitFile)
+      kmItem.dDistanceSpiral = GetPrivateProfileDouble(sSect, sKeyInd & K_DISTANCESPIRAL, 0, m_sKitFile)
+
+      kmItem.dLiLen = GetPrivateProfileDouble(sSect, sKeyInd & K_LILEN, 0, m_sKitFile)
+      kmItem.dLiHeight = GetPrivateProfileDouble(sSect, sKeyInd & K_LIHEIGHT, 0, m_sKitFile)
+      kmItem.dLiLoad = GetPrivateProfileDouble(sSect, sKeyInd & K_LILOAD, 0, m_sKitFile)
       Return True
    End Function
 
-   Friend Function WriteKitName( nKitIndex As Integer, sKitName As String) As Boolean
+   Friend Function WriteKitName(nKitIndex As Integer, sKitName As String) As Boolean
       Dim sKey As String = K_KIT & nKitIndex.ToString("D2")
-      Return WritePrivateProfileString( S_HEADER, sKey, sKitName, m_sKitFile)
+      Return WritePrivateProfileString(S_HEADER, sKey, sKitName, m_sKitFile)
    End Function
 
-   Private Function WriteKitMach( nKitIndex As Integer, nKitMachIndex As Integer, kmItem As KitMach) As Boolean
+   Private Function WriteKitMach(nKitIndex As Integer, nKitMachIndex As Integer, kmItem As KitMach) As Boolean
       ' Leggo il nome del kit
-      Dim sKitName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sKitName) Then Return False
+      Dim sKitName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sKitName) Then Return False
       ' Sezione
       Dim sSect As String = S_KIT & "." & sKitName
       ' Indice
       Dim sKeyInd As String = nKitMachIndex.ToString("D2") & "."
       ' Scrivo i dati della lavorazione
-      If Not IsNothing( kmItem) Then
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOL, kmItem.sToolUUID, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOLNAME, kmItem.sToolName, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_ACTIVE, If( kmItem.bActive, "1", "0"), m_sKitFile)
+      If Not IsNothing(kmItem) Then
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOL, kmItem.sToolUUID, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOLNAME, kmItem.sToolName, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_ACTIVE, If(kmItem.bActive, "1", "0"), m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_CONTOUR, kmItem.nContour.ToString(), m_sKitFile)
-         WritePrivateProfileString(sSect, sKeyInd & K_OFFSETCNT, kmItem.dOffsetCnt.ToString(), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFSETCNT, DoubleToString(kmItem.dOffsetCnt, 3), m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGX, kmItem.nZigZagX.ToString(), m_sKitFile)
-         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGX, kmItem.dOffZigZagX.ToString(), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPX, DoubleToString( kmItem.dStepX, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGX, DoubleToString(kmItem.dOffZigZagX.ToString, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPX, DoubleToString(kmItem.dStepX, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSX, DoubleToString(kmItem.dRadiusX, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEX, DoubleToString(kmItem.dDistanceX, 3), m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGY, kmItem.nZigZagY.ToString(), m_sKitFile)
-         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGY, kmItem.dOffZigZagY.ToString(), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPY, DoubleToString( kmItem.dStepY, 3), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILEN, DoubleToString( kmItem.dLiLen, 3), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LIHEIGHT, DoubleToString( kmItem.dLiHeight, 3), m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILOAD, DoubleToString( kmItem.dLiLoad, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGY, DoubleToString(kmItem.dOffZigZagY, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPY, DoubleToString(kmItem.dStepY, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSY, DoubleToString(kmItem.dRadiusY, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEY, DoubleToString(kmItem.dDistanceY, 3), m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_SPIRAL, kmItem.nSpiral.ToString(), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFSPIRAL, DoubleToString(kmItem.dOffSpiral.ToString, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPSPIRAL, DoubleToString(kmItem.dStepSpiral, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSSPIRAL, DoubleToString(kmItem.dRadiusSpiral, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCESPIRAL, DoubleToString(kmItem.dDistanceSpiral, 3), m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_LILEN, DoubleToString(kmItem.dLiLen, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LIHEIGHT, DoubleToString(kmItem.dLiHeight, 3), m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LILOAD, DoubleToString(kmItem.dLiLoad, 3), m_sKitFile)
       Else
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOL, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_TOOLNAME, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_ACTIVE, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_TOOLNAME, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_ACTIVE, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_CONTOUR, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_OFFSETCNT, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGX, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGX, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPX, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPX, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSX, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEX, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_ZIGZAGY, Nothing, m_sKitFile)
          WritePrivateProfileString(sSect, sKeyInd & K_OFFZIGZAGY, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_STEPY, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILEN, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LIHEIGHT, Nothing, m_sKitFile)
-         WritePrivateProfileString( sSect, sKeyInd & K_LILOAD, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPY, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSY, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCEY, Nothing, m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_SPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_OFFSPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_STEPSPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_RADIUSSPIRAL, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_DISTANCESPIRAL, Nothing, m_sKitFile)
+
+         WritePrivateProfileString(sSect, sKeyInd & K_LILEN, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LIHEIGHT, Nothing, m_sKitFile)
+         WritePrivateProfileString(sSect, sKeyInd & K_LILOAD, Nothing, m_sKitFile)
       End If
       Return True
    End Function
 
-   Private Function EraseKit( nKitIndex As Integer) As Boolean
+   Private Function EraseKit(nKitIndex As Integer) As Boolean
       ' Leggo il nome del kit
-      Dim sKitName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sKitName) Then Return False
+      Dim sKitName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sKitName) Then Return False
       ' Lo elimino dalla lista dei kit scalando tutti di una posizione e eliminando l'ultimo
       Dim nNextKitIndex As Integer = nKitIndex + 1
-      Dim sNextKitName As String = ReadKitName( nNextKitIndex) 
-      while Not String.IsNullOrWhiteSpace( sNextKitName)
-         WriteKitName( nNextKitIndex - 1, sNextKitName)
+      Dim sNextKitName As String = ReadKitName(nNextKitIndex)
+      While Not String.IsNullOrWhiteSpace(sNextKitName)
+         WriteKitName(nNextKitIndex - 1, sNextKitName)
          nNextKitIndex += 1
-         sNextKitName = ReadKitName( nNextKitIndex) 
+         sNextKitName = ReadKitName(nNextKitIndex)
       End While
-      WriteKitName( nNextKitIndex - 1, Nothing)
+      WriteKitName(nNextKitIndex - 1, Nothing)
       ' Sezione
       Dim sSect As String = S_KIT & "." & sKitName
       ' Cancello tutte le lavorazioni del kit
-      WritePrivateProfileString( sSect, Nothing, Nothing, m_sKitFile)
+      WritePrivateProfileString(sSect, Nothing, Nothing, m_sKitFile)
       Return True
    End Function
 
-   Private Function EraseKitMach( nKitIndex As Integer, nKitMachIndex As Integer) As Boolean
+   Private Function EraseKitMach(nKitIndex As Integer, nKitMachIndex As Integer) As Boolean
       ' Leggo il nome del kit
-      Dim sKitName As String = ReadKitName( nKitIndex)
-      If String.IsNullOrWhiteSpace( sKitName) Then Return False
+      Dim sKitName As String = ReadKitName(nKitIndex)
+      If String.IsNullOrWhiteSpace(sKitName) Then Return False
       ' Lo elimino dali KitMach scalando tutti di una posizione e eliminando l'ultimo
       Dim kmCurr As KitMach = Nothing
       Dim nNextKitMachIndex As Integer = nKitMachIndex + 1
-      While ReadKitMach( sKitName, nNextKitMachIndex, kmCurr)
+      While ReadKitMach(sKitName, nNextKitMachIndex, kmCurr)
          kmCurr.nId = nNextKitMachIndex - 1
-         WriteKitMach( nKitIndex, nNextKitMachIndex - 1, kmCurr)
+         WriteKitMach(nKitIndex, nNextKitMachIndex - 1, kmCurr)
          nNextKitMachIndex += 1
       End While
-      WriteKitMach( nKitIndex, nNextKitMachIndex - 1, Nothing)
+      WriteKitMach(nKitIndex, nNextKitMachIndex - 1, Nothing)
       Return True
    End Function
 
@@ -804,7 +952,7 @@ Class Kit
       Get
          Return m_nId
       End Get
-      Set( value As Integer) 
+      Set(value As Integer)
          m_nId = value
       End Set
    End Property
@@ -824,7 +972,7 @@ Class Kit
       End Set
    End Property
 
-   Sub New( nId As Integer, sName As String)
+   Sub New(nId As Integer, sName As String)
       m_nId = nId
       m_sName = sName
 
@@ -832,21 +980,21 @@ Class Kit
 
    End Sub
 
-   Sub New( nId As Integer, sName As String, kitSou As Kit)
+   Sub New(nId As Integer, sName As String, kitSou As Kit)
       m_nId = nId
       m_sName = sName
 
       m_KitMachList = New List(Of KitMach)
 
-      If IsNothing( kitSou) Then Return
+      If IsNothing(kitSou) Then Return
 
       For Each kmItem As KitMach In kitSou.m_KitMachList
-         AddKitMach( kmItem)
+         AddKitMach(kmItem)
       Next
 
    End Sub
 
-   Sub AddKitMach( kitMachItem As KitMach)
+   Sub AddKitMach(kitMachItem As KitMach)
       m_KitMachList.Add(kitMachItem)
    End Sub
 
@@ -862,15 +1010,29 @@ Class KitMach
    Private m_sToolName As String
    Private m_SelTool As Integer
    Friend Shared m_ToolList As List(Of String)
+
    Private m_bActive As Boolean
    Private m_nContour As Integer
    Private m_dOffsetCnt As Double
+
    Private m_nZigZagX As Integer
    Private m_dStepX As Double
    Private m_dOffZigZagX As Double
+   Private m_dRadiusX As Double
+   Private m_dDistanceX As Double
+
    Private m_nZigZagY As Integer
    Private m_dStepY As Double
    Private m_dOffZigZagY As Double
+   Private m_dRadiusY As Double
+   Private m_dDistanceY As Double
+
+   Private m_nSpiral As Integer
+   Private m_dOffSpiral As Double
+   Private m_dStepSpiral As Double
+   Private m_dRadiusSpiral As Double
+   Private m_dDistanceSpiral As Double
+
    Private m_dLiLen As Double
    Private m_dLiHeight As Double
    Private m_dLiLoad As Double
@@ -958,6 +1120,8 @@ Class KitMach
       End Set
    End Property
 
+#Region "Contorno"
+
    Public m_IsModifiedActive As Boolean = False
    Public Property bActive As Boolean
       Get
@@ -985,11 +1149,11 @@ Class KitMach
    End Property
 
    Public m_IsModifiedOffCnt As Boolean = False
-   Public Property dOffsetCnt As Integer
+   Public Property dOffsetCnt As Double
       Get
          Return m_dOffsetCnt
       End Get
-      Set(value As Integer)
+      Set(value As Double)
          If value <> m_dOffsetCnt Then
             m_dOffsetCnt = value
             m_IsModifiedOffCnt = True
@@ -997,6 +1161,10 @@ Class KitMach
       End Set
    End Property
 
+#End Region    ' Contorno
+
+#Region "ZigZag X"
+
    Public m_IsModifiedZigZagX As Boolean = False
    Public Property nZigZagX As Integer
       Get
@@ -1011,11 +1179,11 @@ Class KitMach
    End Property
 
    Public m_IsModifiedOffZigZagX As Boolean = False
-   Public Property dOffZigZagX As Integer
+   Public Property dOffZigZagX As Double
       Get
          Return m_dOffZigZagX
       End Get
-      Set(value As Integer)
+      Set(value As Double)
          If value <> m_dOffZigZagX Then
             m_dOffZigZagX = value
             m_IsModifiedOffZigZagX = True
@@ -1036,6 +1204,36 @@ Class KitMach
       End Set
    End Property
 
+   Public m_IsModifiedRadiusX As Boolean = False
+   Public Property dRadiusX As Double
+      Get
+         Return m_dRadiusX
+      End Get
+      Set(value As Double)
+         If value <> m_dRadiusX Then
+            m_dRadiusX = value
+            m_IsModifiedRadiusX = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedDistanceX As Boolean = False
+   Public Property dDistanceX As Double
+      Get
+         Return m_dDistanceX
+      End Get
+      Set(value As Double)
+         If value <> m_dDistanceX Then
+            m_dDistanceX = value
+            m_IsModifiedDistanceX = True
+         End If
+      End Set
+   End Property
+
+#End Region    ' ZigZag X
+
+#Region "ZigZag Y"
+
    Public m_IsModifiedZigZagY As Boolean = False
    Public Property nZigZagY As Integer
       Get
@@ -1050,11 +1248,11 @@ Class KitMach
    End Property
 
    Public m_IsModifiedOffZigZagY As Boolean = False
-   Public Property dOffZigZagY As Integer
+   Public Property dOffZigZagY As Double
       Get
          Return m_dOffZigZagY
       End Get
-      Set(value As Integer)
+      Set(value As Double)
          If value <> m_dOffZigZagY Then
             m_dOffZigZagY = value
             m_IsModifiedOffZigZagY = True
@@ -1075,6 +1273,105 @@ Class KitMach
       End Set
    End Property
 
+   Public m_IsModifiedRadiusY As Boolean = False
+   Public Property dRadiusY As Double
+      Get
+         Return m_dRadiusY
+      End Get
+      Set(value As Double)
+         If value <> m_dRadiusY Then
+            m_dRadiusY = value
+            m_IsModifiedRadiusY = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedDistanceY As Boolean = False
+   Public Property dDistanceY As Double
+      Get
+         Return m_dDistanceY
+      End Get
+      Set(value As Double)
+         If value <> m_dDistanceY Then
+            m_dDistanceY = value
+            m_IsModifiedDistanceY = True
+         End If
+      End Set
+   End Property
+
+#End Region    ' ZigZag Y
+
+#Region "Spirale"
+
+   Public m_IsModifiedSpiral As Boolean = False
+   Public Property nSpiral As Integer
+      Get
+         Return m_nSpiral
+      End Get
+      Set(value As Integer)
+         If value <> m_nSpiral Then
+            m_nSpiral = value
+            m_IsModifiedSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedOffSpiral As Boolean = False
+   Public Property dOffSpiral As Double
+      Get
+         Return m_dOffSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dOffSpiral Then
+            m_dOffSpiral = value
+            m_IsModifiedOffSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedStepSpiral As Boolean = False
+   Public Property dStepSpiral As Double
+      Get
+         Return m_dStepSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dStepSpiral Then
+            m_dStepSpiral = value
+            m_IsModifiedStepSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedRadiusSpiral As Boolean = False
+   Public Property dRadiusSpiral As Double
+      Get
+         Return m_dRadiusSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dRadiusSpiral Then
+            m_dRadiusSpiral = value
+            m_IsModifiedRadiusSpiral = True
+         End If
+      End Set
+   End Property
+
+   Public m_IsModifiedDistanceSpiral As Boolean = False
+   Public Property dDistanceSpiral As Double
+      Get
+         Return m_dDistanceSpiral
+      End Get
+      Set(value As Double)
+         If value <> m_dDistanceSpiral Then
+            m_dDistanceSpiral = value
+            m_IsModifiedDistanceSpiral = True
+         End If
+      End Set
+   End Property
+
+#End Region    ' Spirale
+
+#Region "Parametri lavorazione"
+
    Public m_IsModifiedLiLen As Boolean = False
    Public Property dLiLen As Double
       Get
@@ -1114,6 +1411,8 @@ Class KitMach
       End Set
    End Property
 
+#End Region    ' Parametri lavorazione
+
    Sub New()
       m_nId = 0
       m_SelTool = 0
@@ -1125,15 +1424,24 @@ Class KitMach
       m_nZigZagX = 0
       m_dOffZigZagX = 0
       m_dStepX = 0
+      m_dRadiusX = 0
+      m_dDistanceX = 0
       m_nZigZagY = 0
       m_dOffZigZagY = 0
       m_dStepY = 0
+      m_dRadiusY = 0
+      m_dDistanceY = 0
+      m_nSpiral = 0
+      m_dOffSpiral = 0
+      m_dStepSpiral = 0
+      m_dRadiusSpiral = 0
+      m_dDistanceSpiral = 0
       m_dLiLen = 0
       m_dLiHeight = 0
       m_dLiLoad = 0
    End Sub
 
-   Sub New( nId As Integer)
+   Sub New(nId As Integer)
       m_nId = nId
       m_SelTool = 0
       m_sToolUUID = "---"
@@ -1144,17 +1452,26 @@ Class KitMach
       m_nZigZagX = 0
       m_dOffZigZagX = 0
       m_dStepX = 0
+      m_dRadiusX = 0
+      m_dDistanceX = 0
       m_nZigZagY = 0
       m_dOffZigZagY = 0
       m_dStepY = 0
+      m_dRadiusY = 0
+      m_dDistanceY = 0
+      m_nSpiral = 0
+      m_dOffSpiral = 0
+      m_dStepSpiral = 0
+      m_dRadiusSpiral = 0
+      m_dDistanceSpiral = 0
       m_dLiLen = 0
       m_dLiHeight = 0
       m_dLiLoad = 0
    End Sub
 
-   Sub New( kmSou As KitMach) 
+   Sub New(kmSou As KitMach)
       m_nId = kmSou.nId
-      m_SelTool = kmSou.selTool
+      m_SelTool = kmSou.SelTool
       m_sToolUUID = kmSou.sToolUUID
       m_sToolName = kmSou.sToolName
       m_bActive = kmSou.bActive
@@ -1163,9 +1480,18 @@ Class KitMach
       m_nZigZagX = kmSou.nZigZagX
       m_dOffZigZagX = kmSou.dOffZigZagX
       m_dStepX = kmSou.dStepX
+      m_dRadiusX = kmSou.dRadiusX
+      m_dDistanceX = kmSou.dDistanceX
       m_nZigZagY = kmSou.nZigZagY
       m_dOffZigZagY = kmSou.dOffZigZagY
       m_dStepY = kmSou.dStepY
+      m_dRadiusY = kmSou.dRadiusY
+      m_dDistanceY = kmSou.dDistanceY
+      m_nSpiral = kmSou.nSpiral
+      m_dOffSpiral = kmSou.dOffSpiral
+      m_dStepSpiral = kmSou.dStepSpiral
+      m_dRadiusSpiral = kmSou.dRadiusSpiral
+      m_dDistanceSpiral = kmSou.dDistanceSpiral
       m_dLiLen = kmSou.dLiLen
       m_dLiHeight = kmSou.dLiHeight
       m_dLiLoad = kmSou.m_dLiLoad

Machine/ToolsDbPageUC.xaml.vb

@@ -506,7 +506,7 @@ Public Class ToolsDbPageUC
          ToolToExportList.Add(ImpExpToolFamily)
       Next
 
-      Dim ExportWndVM As New ImportExportToolWindowVM(ToolToExportList)
+      Dim ExportWndVM As New ImportExportToolWindowVM(ToolToExportList, True)
       Dim ExportWnd As New ImportExportToolWD(Application.Current.MainWindow, ExportWndVM)
 
       ExportWnd.ShowDialog()
@@ -558,7 +558,7 @@ Public Class ToolsDbPageUC
             ToolToImportList.Add(NewFamily)
          End If
       Next
-      Dim ImportWndVM As New ImportExportToolWindowVM(ToolToImportList, ImportFilePath, ImportFileToolNameList)
+      Dim ImportWndVM As New ImportExportToolWindowVM(ToolToImportList, False, ImportFilePath, ImportFileToolNameList)
       Dim ImportWnd As New ImportExportToolWD(Application.Current.MainWindow, ImportWndVM)
 
       ImportWnd.ShowDialog()

MainWindow.xaml.vb

@@ -323,8 +323,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2312, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2312, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2405, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2405, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -569,6 +569,12 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       ' disbilito Test
       TestOff()
+      ' disabilito DragRettangle
+      DragRettangleOff()
+      ' disabilito SplitCurv
+      SplitCurvWJOff()
+      ' disattivo StartCurv
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = True
@@ -625,6 +631,9 @@ Class MainWindow
       EgtMdbGetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -678,6 +687,9 @@ Class MainWindow
    Private Sub CadCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles CadCutBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -730,6 +742,9 @@ Class MainWindow
    Private Sub FrameCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles FrameCutBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -753,8 +768,8 @@ Class MainWindow
             m_ActivePage = Pages.FrameCut
          Case Pages.Photo, Pages.RawPart, Pages.Draw, Pages.Import, Pages.CSV
             ' Pages.Simulation: quando sono nella simulazione devo uscire dalla pagina
-            CadCutBtn.IsChecked = True
-            FrameCutBtn.IsChecked = False
+            CadCutBtn.IsChecked = False
+            FrameCutBtn.IsChecked = True
          Case Pages.FrameCut
             FrameCutBtn.IsChecked = True
          Case Pages.Machine
@@ -783,6 +798,9 @@ Class MainWindow
    Private Sub MachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachineBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -831,6 +849,9 @@ Class MainWindow
    Private Sub OptionsBtn_Click(sender As Object, e As RoutedEventArgs) Handles OptionsBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
+      SplitCurvWJOff()
+      StartCurvWJOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -1137,10 +1158,15 @@ Class MainWindow
    Private Sub OnIdle()
       ' Recupero il tipo di progetto
       Dim nPrjType As Integer = m_CurrentProjectPageUC.GetCurrentProjectType()
+      ' Verifico presenza testa H1 per lama/fresa (nel contesto principale)
+      Dim nCurrCtx As Integer = EgtGetCurrentContext()
+      EgtSetCurrentContext(m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
+      Dim bHeadH1 As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      EgtSetCurrentContext(nCurrCtx)
       ' Aggiorno interfaccia
       CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
-      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso (EgtGetHeadId("H1") <> GDB_ID.NULL)
-      DirectCutBtn.IsEnabled = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso bHeadH1
+      ' DirectCutBtn.IsEnabled = bHeadH1
    End Sub
 
    ' Nomi dei file per OmagVIEW
@@ -1885,8 +1911,30 @@ Class MainWindow
       ' deseleziono gli oggetti e spengo il bottone
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+      EgtResetMark(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       m_CadCutPageUC.m_ProjectMgr.TestBtn.IsChecked = False
-      m_CurrentProjectPageUC.m_bSelectCurv = False
+      Me.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
+   End Sub
+
+   ' spegne il comando per la mofica dei rettangoli
+   Public Sub DragRettangleOff()
+      m_CadCutPageUC.m_NestPage.DragRettanleBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedDragRettangle = False
+      ShowParkedParts()
+
+   End Sub
+
+   Public Sub SplitCurvWJOff()
+      m_CadCutPageUC.m_NestPage.SplitCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedSplitCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetSplitCurvWJParam()
+
+   End Sub
+
+   Public Sub StartCurvWJOff()
+      m_CadCutPageUC.m_NestPage.StartCurveWJBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedStartCurveWJ = False
+      m_CadCutPageUC.m_NestPage.ResetStartCurvWJParam()
    End Sub
 
 End Class

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.1.1")>
-<Assembly: AssemblyFileVersion("2.4.1.1")>
+<Assembly: AssemblyVersion("2.4.5.4")>
+<Assembly: AssemblyFileVersion("2.4.5.4")>

NcComm/CNCommunication.vb

@@ -281,6 +281,14 @@ Public Class CNCommunication
          m_CN.SetCnDataVar(CN_generico.CnData.LimitZ, sVal)
          GetPrivateProfileString(S_NCDATA, K_POWEROVR, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.PowerOvr, sVal)
+
+         GetPrivateProfileString(S_NCDATA, K_PARKING, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.Parking, sVal)
+         GetPrivateProfileString(S_NCDATA, K_ENABLEZONE, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.EnableZone, sVal)
+         GetPrivateProfileString(S_NCDATA, K_ENABLEPC, "", sVal, m_MainWindow.GetMachIniFile())
+         m_CN.SetCnDataVar(CN_generico.CnData.EnablePC, sVal)
+
          GetPrivateProfileString(S_NCDATA, K_VACUUMUP, "", sVal, m_MainWindow.GetMachIniFile())
          m_CN.SetCnDataVar(CN_generico.CnData.VacuumUp, sVal)
          GetPrivateProfileString(S_NCDATA, K_VACUUMDOWN, "", sVal, m_MainWindow.GetMachIniFile())
@@ -539,6 +547,9 @@ Public Class CNCommunication
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.DoorClosedChanged(m_CN.nDoorClosedState)
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.LimitZChanged(m_CN.bLimitZState)
             m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.FiveAxisStateChanged(m_CN.Is_G24_active())
+            m_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ParkingStateChanged(m_CN.bParkingState)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.ZoneStateChanged(m_CN.nEnableZone)
+            'm_MainWindow.m_DirectCutPageUC.m_ControlsMachineButton.PcStateChanged(m_CN.nEnablePc)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumUpChanged(m_CN.bVacuumUp)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.VacuumDownChanged(m_CN.bVacuumDown)
             m_MainWindow.m_DirectCutPageUC.m_VacuumMachineButton.Vacuum2UpChanged(m_CN.bVacuum2Up)
@@ -583,7 +594,12 @@ Public Class CNCommunication
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ThreeAxisStateChanged(True)
                m_MainWindow.m_DirectCutPageUC.m_MachineButtons.FiveAxisStateChanged(False)
             End If
-            m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+            m_MainWindow.m_DirectCutPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
 
             ' Nuovi bottoni (uso joystick) per Area4
             If m_IsNewConsole Then
@@ -619,6 +635,11 @@ Public Class CNCommunication
             m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.FiveAxisStateChanged(False)
          End If
          m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.DoorStateChanged(m_CN.nDoorClosedState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.ParkingStateChanged(m_CN.bParkingState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnableZoneStateChanged(m_CN.nEnableZone)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.EnablePcStateChanged(m_CN.nEnablePc)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableUpChanged(m_CN.bTableUpState)
+         m_MainWindow.m_WorkInProgressPageUC.m_MachineButtons.TableDownChanged(m_CN.bTableDownState)
       End If
 
    End Sub

NcComm/CN_generico.vb

@@ -8,7 +8,7 @@ Public MustInherit Class CN_generico
    Public Const MAX_VAR As Short = 100
    Public Const MAX_VALUES As Short = 9           ' Max. index to read the data from the FXServer array
    Public Const MAX_TOOLS As Short = 100
-   Public Const NUM_DATA = 52                     ' Numero di dati del CN (Speed,Feed,...)
+   Public Const NUM_DATA = 55                     ' Numero di dati del CN (Speed,Feed,...)
 
    Public m_NewVariable As Boolean = False        ' per scrittura delle vairbaili Apllication del PLC
 
@@ -66,6 +66,10 @@ Public MustInherit Class CN_generico
       ZBJog = 49
       PowerON = 50
       Remote = 51
+
+      Parking = 52
+      EnableZone = 53
+      EnablePC = 54
    End Enum
 
 #End Region
@@ -173,6 +177,9 @@ Public MustInherit Class CN_generico
    Public nDoorClosedState As Integer
    Public bLimitZState As Boolean
    Public bPowerOvr As Double
+   Public bParkingState As Boolean
+   Public nEnableZone As Integer
+   Public nEnablePc As Integer
    Public bHsm As Double
    Public bVacuumUp As Boolean
    Public bVacuumDown As Boolean

NcComm/M_Num.vb

@@ -1077,17 +1077,24 @@ Namespace Num
                Case CnData.VacuumOff     ' (45) Stato aspirazione ventose spento
                   bVacuumOff = CBool(values(n))
 
-               Case CnData.XYJog     ' (46) 
+               Case CnData.XYJog     ' (47) 
                   bXYJog = CBool(values(n))
-               Case CnData.ZCJog     ' (47)
+               Case CnData.ZCJog     ' (48)
                   bZCJog = CBool(values(n))
-               Case CnData.ZBJog     ' (48)
+               Case CnData.ZBJog     ' (49)
                   bZBCJog = CBool(values(n))
-               Case CnData.PowerON     ' (49)
+               Case CnData.PowerON     ' (50)
                   bPowerON = CBool(values(n))
-               Case CnData.Remote     ' (50)
+               Case CnData.Remote     ' (51)
                   bRemote = CBool(values(n))
 
+               Case CnData.Parking     ' (52)
+                  bParkingState = CBool(values(n))
+               Case CnData.EnableZone     ' (53)
+                  nEnableZone = CInt(values(n))
+               Case CnData.EnablePC     ' (54)
+                  nEnablePc = CInt(values(n))
+
             End Select
          Next
 

OmagCUT.vbproj

@@ -166,6 +166,9 @@
     <Compile Include="AboutBox\AboutBoxWD.xaml.vb">
       <DependentUpon>AboutBoxWD.xaml</DependentUpon>
     </Compile>
+    <Compile Include="CadCuts\SelectPartFromFamilyWD.xaml.vb">
+      <DependentUpon>SelectPartFromFamilyWD.xaml</DependentUpon>
+    </Compile>
     <Compile Include="CAM\CamPolishing.vb" />
     <Compile Include="DirectCuts\Polishing.xaml.vb">
       <DependentUpon>Polishing.xaml</DependentUpon>
@@ -405,6 +408,10 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
+    <Page Include="CadCuts\SelectPartFromFamilyWD.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="DirectCuts\Polishing.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
@@ -1238,6 +1245,22 @@
   <ItemGroup>
     <Resource Include="Resources\NewIcons\Acquisisci-P.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\Spiral.png" />
+    <Resource Include="Resources\NewIcons\Drag_Rettangle.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\GenerateCN.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\GenerateCN.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\SPLIT-WJ.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\START-WJ.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDarkDictionary.xaml

@@ -46,6 +46,7 @@
     <BitmapImage x:Key="DownArrowImg" UriSource="Resources/NewIcons/DownArrow.png"></BitmapImage>
     <BitmapImage x:Key="DrawImg" UriSource="Resources/NewIcons/icone-tagli-3.png"></BitmapImage>
     <BitmapImage x:Key="FrameMachiningImg" UriSource="Resources/NewIcons/FrameMachining.png"></BitmapImage>
+    <BitmapImage x:Key="GenerateCNImg" UriSource="Resources/NewIcons/GenerateCN.png"></BitmapImage>
     <BitmapImage x:Key="GenericViewImg" UriSource="Resources/NewIcons/GenericView.png"></BitmapImage>
     <BitmapImage x:Key="HalfTurnRotateImg" UriSource="Resources/Negative/HalfTurnRotate.png"></BitmapImage>
     <BitmapImage x:Key="ImportImg" UriSource="Resources/NewIcons/icone-tagli-6.png"></BitmapImage>
@@ -105,6 +106,9 @@
     <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
+    <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
+    <BitmapImage x:Key="StartWJImg" UriSource="Resources/NewIcons/START-WJ.png"></BitmapImage>
+    <BitmapImage x:Key="SplitWJImg" UriSource="Resources/NewIcons/SPLIT-WJ.png"></BitmapImage>
     
     <!--Machine-->
     <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>

OmagCUTDictionary.xaml

@@ -116,6 +116,7 @@
     <BitmapImage x:Key="DownArrowImg" UriSource="Resources/DownArrow.png"></BitmapImage>
     <BitmapImage x:Key="DrawImg" UriSource="Resources/Draw.png"></BitmapImage>
     <BitmapImage x:Key="FrameMachiningImg" UriSource="Resources/FrameMachining.png"></BitmapImage>
+    <BitmapImage x:Key="GenerateCNImg" UriSource="Resources/GenerateCN.png"></BitmapImage>
     <BitmapImage x:Key="GenericViewImg" UriSource="Resources/GenericView.png"></BitmapImage>
     <BitmapImage x:Key="HalfTurnRotateImg" UriSource="Resources/HalfTurnRotate.png"></BitmapImage>
     <BitmapImage x:Key="ImportImg" UriSource="Resources/Import.png"></BitmapImage>
@@ -173,6 +174,9 @@
     <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
+    <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
+    <BitmapImage x:Key="StartWJImg" UriSource="Resources/NewIcons/START-WJ.png"></BitmapImage>
+    <BitmapImage x:Key="SplitWJImg" UriSource="Resources/NewIcons/SPLIT-WJ.png"></BitmapImage>
 
     <!--Machine-->
     <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>

Project/CicloStartWD.xaml.vb

@@ -18,7 +18,7 @@ Class CicloStartWD
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
       ' imopposto il messaggio di avvio
-      CicloStartTxbl.Text = "Avvio Ciclo-Start"
+      CicloStartTxbl.Text = EgtMsg(91130)   ' Esegui programma?
    End Sub
 
    ' creo un progetto nuovo

Project/CurrentProjectPageUC.xaml.vb

@@ -6,7 +6,6 @@ Imports EgtWPFLib5
 
 Public Class CurrentProjectPageUC
    ' Dichiarazione eventi
-   Friend Event OnMouseDownSceneSelCurv(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
@@ -24,8 +23,8 @@ Public Class CurrentProjectPageUC
    ' Dati del grezzo
    Friend m_nRawId As Integer = GDB_ID.NULL
    Friend m_dRawHeight As Double
-   ' pagina impostata per selezionare una lavorazione
-   Friend m_bSelectCurv As Boolean = False
+   '' Flag per impostata per selezionare di una curva
+   'Friend m_bSelectCurv As Boolean = False
    ' Costanti tipo progetto
    Friend Enum PRJ_TYPE As Integer
       EMPTY = 0
@@ -181,42 +180,12 @@ Public Class CurrentProjectPageUC
          EgtInitMachMgr(m_MainWindow.GetMachinesRootDir(), m_MainWindow.GetToolMakersDir())
          m_bFirst = False
 
-         ' ------------------ SELEZIONE AVVIO -----------------------------
-         ' apro la finstra di selezione di avvio del programma
-         'StartProgram()
-         ' ------------------ SELEZIONE AVVIO -----------------------------
-
-         '' Se richiesto, carico ultimo progetto
-         'Dim bAutoLoadLast As Boolean = GetPrivateProfileInt(S_GENERAL, K_AUTOLOADLASTPROJ, 0, m_MainWindow.GetIniFile()) <> 0
-         'If bAutoLoadLast Then
-         '   m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-         '   Dim sPath As String = m_MainWindow.GetSaveDir() & "\" & m_nCurrProj.ToString("D4") & ".nge"
-         '   If Not LoadProject(sPath, False) Then
-         '      NewProject()
-         '   End If
-         '   EgtResetModified()
-         '   'Altrimenti ne imposto uno nuovo
-         'Else
-         '   m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
-         '   NewProject()
-         'End If
-
          ' creo nuovo progetto
          m_nCurrProj = GetPrivateProfileInt(S_GENERAL, K_LASTPROJ, 0, m_MainWindow.GetIniFile())
          'NewProject()
 
          ' Nascondo progress per fotografia
          PhotoProgress.Visibility = Windows.Visibility.Hidden
-         ' Carico sottopagina opportuna
-         If GetProjectType() <> PRJ_TYPE.FRAMES Then
-            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
-            m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
-            m_MainWindow.CadCutBtn.IsChecked = True
-         Else
-            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
-            m_MainWindow.m_ActivePage = MainWindow.Pages.FrameCut
-            m_MainWindow.FrameCutBtn.IsChecked = True
-         End If
 
       Else
          EgtSetCurrentContext(CurrentProjectScene.GetCtx())
@@ -275,8 +244,10 @@ Public Class CurrentProjectPageUC
          m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
          m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_OpenPage)
          m_MainWindow.m_ActivePage = MainWindow.Pages.Open
+         ' inizializzo gli oggetti della pagina (non passo dalla funzione Load!)
+         m_MainWindow.m_CadCutPageUC.m_ProjectMgr.SetReference()
 
-      ' seleziono il file dalla lista della finestra (= 4) 
+         ' seleziono il file dalla lista della finestra (= 4) 
       ElseIf MyStartLancherWD.CurrSelection = MODE_LAUNCHER.SelectedProject Then
          NewProject()
          Dim sCurrDir As String = Path.GetDirectoryName(MyStartLancherWD.SelPath)
@@ -305,6 +276,21 @@ Public Class CurrentProjectPageUC
          End If
       End If
 
+      ' se apro la finestra "OpenFolder" l'assegnazione dei Children è fatta direttamente nella classe ProjectMgrUC
+      If MyStartLancherWD.CurrSelection <> MODE_LAUNCHER.OpenFolder Then
+         ' Carico sottopagina opportuna
+         If GetProjectType() <> PRJ_TYPE.FRAMES Then
+            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_CadCutPageUC)
+            m_MainWindow.m_ActivePage = MainWindow.Pages.CadCut
+            m_MainWindow.CadCutBtn.IsChecked = True
+         Else
+            CurrentProjectPageGrid.Children.Add(m_MainWindow.m_FrameCutPageUC)
+            m_MainWindow.m_ActivePage = MainWindow.Pages.FrameCut
+            m_MainWindow.FrameCutBtn.IsChecked = True
+         End If
+      End If
+
+
    End Sub
 
    ' questo metodo è direttamente richiamato in caso di selezione della regione sinistra della pagina
@@ -328,12 +314,7 @@ Public Class CurrentProjectPageUC
    End Sub
 
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.OnMouseDownScene
-      If m_bSelectCurv Then
-         RaiseEvent OnMouseDownSceneSelCurv(sender, e)
-      Else
-         RaiseEvent OnMouseDownScene(sender, e)
-      End If
-
+      RaiseEvent OnMouseDownScene(sender, e)
    End Sub
 
    Private Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.OnMouseMoveScene

Project/ProjectMgrUC.xaml.vb

@@ -34,9 +34,7 @@ Public Class ProjectMgrUC
 
    Private Sub ProjectMgrUC_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
       ' Impostazioni
-      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
-      m_CurrMachine = m_MainWindow.m_CurrentMachine
-      m_CurrNcComm = m_MainWindow.m_CNCommunication
+      SetReference()
 
       ' Se richiesto carico finestra per VeinMatching e ultimo intarsio
       If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO) And
@@ -55,6 +53,12 @@ Public Class ProjectMgrUC
       End If
    End Sub
 
+   Public Sub SetReference()
+      m_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
+      m_CurrMachine = m_MainWindow.m_CurrentMachine
+      m_CurrNcComm = m_MainWindow.m_CNCommunication
+   End Sub
+
    Private Sub NewBtn_Click(sender As Object, e As RoutedEventArgs) Handles NewBtn.Click
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
@@ -248,6 +252,10 @@ Public Class ProjectMgrUC
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Cancello eventuali messaggi
       m_CurrProjPage.ClearMessage()
+      ' cancello tutti i tagli di separazione (Waterjet)
+      ResetAllSplitCurv()
+      ' cancello tutti i punti di inizio (Waterjet)
+      ResetAllStartCurv()
       ' Ricalcolo tutte le lavorazioni
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
@@ -276,7 +284,7 @@ Public Class ProjectMgrUC
       m_CurrProjPage.SetWarningMessage("Trial Version")
 #Else
       ' se sono in modalità Test allora eseguo solo il posizionamento della lama
-      If m_CurrProjPage.m_bSelectCurv Then
+      If m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv Then
          ' Verifico non sia versione Ufficio
          If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
             m_CurrProjPage.SetWarningMessage("Office Version")
@@ -336,7 +344,7 @@ Public Class ProjectMgrUC
          ' verifica assi lineari
          EgtVerifyOutstroke(dX, dY, dZ, dC1, dB1, nStat)
          If nStat <> 0 Then
-            vtDirT = - vtDirT
+            vtDirT = -vtDirT
             ptMid -= vtDirT * dThick
             EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
             ' calcolo la posizione degli assi lineari X, Y, Z ( correggere il punto ptMid.z sommando il raggio utensile)
@@ -349,6 +357,14 @@ Public Class ProjectMgrUC
          Return
       End If
       ' ---------------------------- Fine modalità test --------------------------------------------
+      ' se esiste salvo il nome del progetto
+      Dim sCurrProjName As String = String.Empty
+      GetPrivateProfileString(S_GENERAL, K_LASTNAMEPROJ, "", sCurrProjName, m_MainWindow.GetIniFile())
+      If Not String.IsNullOrEmpty(sCurrProjName) Then
+         EgtSetInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_PROJNAME, sCurrProjName)
+      Else
+         EgtRemoveInfo(EgtGetFirstNameInGroup(GDB_ID.ROOT, NAME_PROJMARK), INFO_PROJNAME)
+      End If
 
       Dim bOk As Boolean = True
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
@@ -466,20 +482,15 @@ Public Class ProjectMgrUC
             ' se abilitato e non è restart, lancio eventuale lua post-trasmissione
             If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.SIMPLESTATISTICS) And nPhaseRestart = 0 Then
                m_MainWindow.ExecSentProgScript(False)
-               ''-------------------Avvio il Ciclo-Start-------------------------
-               'Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
-               'MyCicloStartWD.ShowDialog()
-               ''-------------------Avvio il Ciclo-Start-------------------------
             End If
          End If
 
-         '-------------------Avvio il Ciclo-Start-------------------------
-         If GetPrivateProfileInt(S_GENERAL, "StartProgram", 0, m_MainWindow.GetIniFile()) <> 0 Then
+         '------------------- INIZIO Avvio il Ciclo-Start-------------------------
+         If GetPrivateProfileInt(S_GENERAL, K_STARTPROGRAM, 0, m_MainWindow.GetIniFile()) <> 0 Then
             Dim MyCicloStartWD As New CicloStartWD(m_MainWindow)
             MyCicloStartWD.ShowDialog()
          End If
-
-         '-------------------Avvio il Ciclo-Start-------------------------
+         '------------------- FINE Avvio il Ciclo-Start-------------------------
 
          ' Altrimenti linea di produzione
       Else
@@ -736,11 +747,11 @@ Public Class ProjectMgrUC
 
    Private Sub TestBtn_Click(sender As Object, e As RoutedEventArgs) Handles TestBtn.Click
       If TestBtn.IsChecked Then
-         m_CurrProjPage.m_bSelectCurv = True
+         m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = True
          ' deseleziono tutto
          EgtDeselectAll()
       Else
-         m_CurrProjPage.m_bSelectCurv = False
+         m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
          EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
          EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       End If

RawPhoto/Camera.vb

@@ -287,7 +287,6 @@ Public Class Camera
    Public Function CameraClick() As Boolean
       ' Verifiche preliminari
       Dim nInd As Integer = PrepareCamera()
-      If nInd = 0 Then Return False
       ' Visualizzo progressbar
       m_bBusy = True
       m_MainWindow.m_CurrentProjectPageUC.PhotoProgress.Visibility = Visibility.Visible
@@ -308,6 +307,30 @@ Public Class Camera
          End If
       Catch ex As Exception
       End Try
+
+      ' ------------------------------------ accensione riflettori ------------------------------------
+      Dim sPLCVarSpotLight1 As String = String.Empty
+      GetPrivateProfileString(S_NCDATA, K_SPOTLIGHT1, "", sPLCVarSpotLight1, m_MainWindow.GetMachIniFile())
+      Dim sPLCVarSpotLight2 As String = String.Empty
+      GetPrivateProfileString(S_NCDATA, K_SPOTLIGHT2, "", sPLCVarSpotLight2, m_MainWindow.GetMachIniFile())
+      Dim nPhotoDeley As Integer = GetPrivateProfileInt(S_NCNUM, K_PHOTODELEY, "100", m_MainWindow.GetMachIniFile())
+
+      Select Case m_MainWindow.m_CNCommunication.m_nNCType
+         Case 1, 2
+            If m_MainWindow.m_CNCommunication.m_nNCType = 2 Then
+               ' solo per Flexium
+               m_MainWindow.m_CNCommunication.m_CN.DPlcVariables_WriteVariables(If(nInd <> 2, sPLCVarSpotLight1, sPLCVarSpotLight2), "1")
+               ' altrimenti scrittura delle variabili E
+            Else
+               m_MainWindow.m_CNCommunication.m_CN.DVariables_WriteVariables2(If(nInd <> 2, sPLCVarSpotLight1, sPLCVarSpotLight2), "1")
+            End If
+            System.Threading.Thread.Sleep(nPhotoDeley)
+         Case 3
+            ' SIEMENS
+      End Select
+
+      ' ------------------------------------ accensione riflettori ------------------------------------
+
       ' Scatto una foto con eventuale riconoscimento del contorno (il programma deve essere già attivo)
       Dim bOk As Boolean = False
       Dim sArgs As String = "2 0"

RawPhoto/ChooseMachining.xaml.vb

@@ -263,7 +263,7 @@ Public Class ChooseMachining
          If SysNotes <> String.Empty Then
             Dim MachiningMaterials() = SysNotes.Split(";".ToCharArray)
             SysNotes = String.Empty
-            If m_CurrentMachine.bWaterJet Then
+            If m_CurrentMachine.bWaterJet And m_CurrentMachine.bFromDBWaterJet Then
                For Each Material As Object In MachiningMaterials
                   Dim Param() As String = Material.Split(",".ToCharArray)
                   Dim SubParam() As String = Param(0).Split(".".ToCharArray)
@@ -589,18 +589,24 @@ Public Class ChooseMachining
             ' verifico che sia stato inserito veramente una lavorazione prima di comunicare una modifica
             If CurrMillingCmBx.SelectedItem <> m_CurrentMachine.sCurrWaterJetting Then m_MachIsModified = True
          End If
-         If String.IsNullOrEmpty(CurrWJettingQualityCmBx.SelectedItem) Then
-            CurrWJettingQualityCmBx.SelectedItem = m_CurrentMachine.sCurrWaterJettingQuality
-         End If
-         ' verifico che la selezione sia andata a buon fine, altrimenti comunico l'avvenuta modifica
-         If String.IsNullOrEmpty(CurrWJettingQualityCmBx.SelectedItem) Then
-            ' verifico che sia stato inserito veramente una lavorazione prima di comunicare una modifica
-            If CurrWJettingQualityCmBx.SelectedItem <> m_CurrentMachine.sCurrWaterJettingQuality Then m_MachIsModified = True
-         End If
-
-         CurrWJettingQualityCmBx.Visibility = Windows.Visibility.Visible
          CurrWJettingTxBl.Visibility = Windows.Visibility.Visible
          CurrWJettingCmBx.Visibility = Windows.Visibility.Visible
+         ' se DB WaterJet abilitato avrò anche la CmBx della Quality altrimenti espando la CmBx del Waterjetting corrente su tutta la riga
+         If m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+            CurrWJettingCmBx.SetValue(Grid.ColumnSpanProperty, 1)
+            If String.IsNullOrEmpty(CurrWJettingQualityCmBx.SelectedItem) Then
+               CurrWJettingQualityCmBx.SelectedItem = m_CurrentMachine.sCurrWaterJettingQuality
+            End If
+            ' verifico che la selezione sia andata a buon fine, altrimenti comunico l'avvenuta modifica
+            If String.IsNullOrEmpty(CurrWJettingQualityCmBx.SelectedItem) Then
+               ' verifico che sia stato inserito veramente una lavorazione prima di comunicare una modifica
+               If CurrWJettingQualityCmBx.SelectedItem <> m_CurrentMachine.sCurrWaterJettingQuality Then m_MachIsModified = True
+            End If
+            CurrWJettingQualityCmBx.Visibility = Windows.Visibility.Visible
+         Else
+            CurrWJettingCmBx.SetValue(Grid.ColumnSpanProperty, 3)
+            CurrWJettingQualityCmBx.Visibility = Windows.Visibility.Collapsed
+         End If
       End If
 
       Me.Height = 42 * m_RowNumber
@@ -633,10 +639,14 @@ Public Class ChooseMachining
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       DialogResult = True
+      ' Aggiorno i parametri dei tagli diretti
+      m_MainWindow.m_DirectCutPageUC.ReloadParam()
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
       DialogResult = False
+      ' Aggiorno i parametri dei tagli diretti
+      m_MainWindow.m_DirectCutPageUC.ReloadParam()
    End Sub
 
 End Class

RawPhoto/RawPartPageUC.xaml.vb

@@ -142,7 +142,7 @@ Public Class RawPartPageUC
                    GetPrivateProfileInt(S_RAWPART, K_SLABID, 0, m_MainWindow.GetIniFile()) <> 0)
       SlabIdBtn.Visibility = If(m_bSlabId, Windows.Visibility.Visible, Windows.Visibility.Collapsed)
 
-      m_SmartMachiningPage = GetPrivateProfileInt(S_GENERAL, "SmartMachiningPage", 0, m_MainWindow.GetIniFile()) <> 0
+      m_SmartMachiningPage = GetPrivateProfileInt(S_GENERAL, K_SMARTMACHININGPAGE, 0, m_MainWindow.GetIniFile()) <> 0
 
       ' Imposto i messaggi letti dal file dei messaggi
       OutlineBtn.Content = EgtMsg(MSG_RAWPARTPAGEUC + 33)       'Rectangle - Rettangolo
@@ -167,7 +167,7 @@ Public Class RawPartPageUC
    Private Sub RawPartPage_Loaded(sender As Object, e As RoutedEventArgs)
       ' aggiorno la lista dei materiali
       Dim Index As Integer = 1
-      If m_CurrentMachine.bWaterJet Then
+      If m_CurrentMachine.bWaterJet And m_CurrentMachine.bFromDBWaterJet Then
          m_CurrentMachine.LoadWJMaterial()
       End If
 

Simulation/SimulationPageUC.xaml

@@ -240,6 +240,9 @@
             <ColumnDefinition Width="1*"/>
             <ColumnDefinition Width="1*"/>
          </Grid.ColumnDefinitions>
+         <Button Name="GenerateCN_Btn" Grid.Column="1" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Click="GenerateXPIUC_Click">
+                <Image Source="{DynamicResource GenerateCNImg}" Style="{StaticResource OmagCut_ButtonIcon}" />
+         </Button>
          <Button Grid.Column="2" Style="{DynamicResource OmagCut_GradientBlueIconButton}" Click="ExitBtnUC_Click">
             <Image Source="{DynamicResource VImg}" Style="{StaticResource OmagCut_ButtonIcon}" />
          </Button>

Simulation/SimulationPageUC.xaml.vb

@@ -1,5 +1,6 @@
 Imports System.Runtime.InteropServices
 Imports EgtUILib
+Imports EgtWPFLib
 
 Public Class SimulationPageUC
    ' Riferimenti a pagine
@@ -76,6 +77,12 @@ Public Class SimulationPageUC
       End If
       ' Pulsante Play
       PlayPauseImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/Play.png", UriKind.Relative))
+      ' abilito la visualizzazione del pulsante per la sola generazione del codice CN
+      If GetPrivateProfileInt(S_GENERAL, K_GENERATECN, 0, m_MainWindow.GetIniFile()) <> 0 Then
+         GenerateCN_Btn.Visibility = Visibility.Visible
+      Else
+         GenerateCN_Btn.Visibility = Visibility.Hidden
+      End If
    End Sub
 
    Private Sub SimulationPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -559,6 +566,111 @@ Public Class SimulationPageUC
 
    End Sub
 
+   Private Sub GenerateXPIUC_Click(sender As Object, e As RoutedEventArgs)
+      Dim bOk As Boolean = True
+      EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
+      ' Elimino eventuale attrezzaggio da OmagOFFICE
+      EgtEraseCurrSetup()
+      ' Verifico l'attrezzaggio degli utensili utilizzati
+      Dim sMissingTools As String = String.Empty
+      If Not VerifySetup(sMissingTools) Then
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90322) & " " & sMissingTools)  'Mancano gli utensili : ... 
+         Return
+      End If
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Aggiorno flag per lavaggio
+      m_CurrProjPage.UpdateWashingFlag()
+      ' Aggiorno flag per tastatura per tagli con angolo di fianco
+      m_CurrProjPage.UpdateSideAngCutProbeFlag()
+      ' Se pezzi piani e non c'è ordine delle lavorazioni, ricalcolo tutto e ne faccio uno automatico
+      Dim nPrjType As Integer = m_CurrProjPage.GetCurrentProjectType()
+      Dim bDirectCut As Boolean = (GetDirectCutPart() <> GDB_ID.NULL)
+      If nPrjType = CurrentProjectPageUC.PRJ_TYPE.FLATS And
+         Not bDirectCut And
+         Not m_CurrProjPage.GetOrderMachiningFlag() Then
+         ResetAllMachinings()
+         bOk = SortAllMachinings()
+         If bOk Then
+            m_CurrProjPage.SetOrderMachiningFlag()
+            Dim bModif As Boolean = TestAllMachiningsForStrict()
+            If bModif Then
+               m_CurrProjPage.SetWarningMessage(EgtMsg(90321))     'Ridotte alcune lavorazioni per evitare interferenze
+            Else
+               m_CurrProjPage.SetInfoMessage(EgtMsg(90399))        'Aggiornate tutte le lavorazioni
+            End If
+            EgtDraw()
+         End If
+      End If
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Disabilito impostazione modificato
+      EgtDisableModified()
+      ' Aggiorno le lavorazioni
+      bOk = UpdateAllMachiningsToolpaths() And bOk
+      ' Aggiorno posizionamento ventose sui pezzi per eventuali tagli da sotto con lama
+      bOk = UpdateVacuumsForDrip() And bOk
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Inserisco indice di progetto
+      m_CurrProjPage.SetProjectIndexFlag()
+      ' Inserisco il materiale
+      m_CurrProjPage.SetProjectMaterial()
+      ' Salvo il progetto con le lavorazioni
+      Dim sMchPath As String = m_MainWindow.GetTempDir() & "\MachProj.nge"
+      m_CurrProjPage.SaveFile(sMchPath)
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Se modalità Ufficio, copio il progetto ed esco
+      If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
+         ' Ripristino come fase corrente quella iniziale
+         EgtSetCurrPhase(1)
+         ' Chiedo il nome del file esportato
+         Dim MySaveNameWD As New SaveNameWD(m_MainWindow, SaveNameWD.SAVE_TYPE.PRJ_COPY)
+         MySaveNameWD.ShowDialog()
+         Return
+      End If
+      ' Se presente ripartenza, ne chiedo conferma
+      Dim nPhaseRestart As Integer = m_CurrProjPage.GetProjectNcRestart()
+      If nPhaseRestart <> 0 Then
+         ' Confermi ripartenza dalla fase NNN ?
+         Dim AskNcRestart As New EgtMsgBox(m_MainWindow, "", String.Format(EgtMsg(90326), nPhaseRestart),
+                                        EgtMsgBox.Buttons.YES_NO_CANCEL, EgtMsgBox.Icons.NULL, 2)
+         Select Case AskNcRestart.m_nPressedBtn
+            Case 1         ' YES
+            Case 2         ' NO
+               EgtEnableModified()
+               m_CurrProjPage.ResetProjectNcRestart()
+               nPhaseRestart = 0
+               EgtDisableModified()
+            Case Else      ' CANCEL
+               Return
+         End Select
+      End If
+      ' Se abilitate, eseguo le stime
+      If GetPrivateProfileInt(S_MACH_ESTIMATIONS, K_ENABLEEST, 0, m_MainWindow.GetMachIniFile()) <> 0 Then
+         EgtEstimate(m_MainWindow.GetTempDir() & "\MachProj.html", "OmagCut ver." & m_MainWindow.GetVersion())
+      End If
+      ' Genero file CNC (lancio anche se errore in precedenza) -> recupero la tavola corrente! CamAuto.GetCurrentTable()
+      Dim nIndexTab As Integer = CamAuto.GetCurrentTable()
+      Dim sIndexTab As String = String.Empty
+      If nIndexTab > 0 Then
+         sIndexTab = nIndexTab.ToString
+      End If
+      Dim sFileName As String = "CadCut" & sIndexTab
+      Dim sCncPath As String = m_MainWindow.GetCncDir() & "\" & sFileName & m_MainWindow.m_CurrentMachine.sIsoFileExt
+      bOk = EgtGenerate(sCncPath, "OmagCut ver." & m_MainWindow.GetVersion()) And bOk
+      ' Costringo ad aggiornare UI
+      UpdateUI()
+      ' Ripristino come fase corrente quella iniziale
+      EgtSetCurrPhase(1)
+      If bOk Then
+         m_CurrProjPage.SetInfoMessage("Genarato file " & sFileName & m_MainWindow.m_CurrentMachine.sIsoFileExt)
+      Else
+         m_CurrProjPage.SetErrorMessage(EgtMsg(90314))       'Errore nella generazione del programma CN
+      End If
+   End Sub
+
    Private Function ProcessEvents(nProg As Integer, nPause As Integer) As Integer
       ' Visualizzo assi
       ShowCncData()

Utility/Utility.vb

@@ -60,6 +60,69 @@ Module Utility
       End If
    End Function
 
+#Region "PreGuidCode"
+
+   ' recupero i primi 5 caratteri della stringa
+   Friend Function GetPreGuidCode(sGuidCode As String) As String
+      If sGuidCode.Count > 5 Then
+         Return sGuidCode(0) & sGuidCode(1) & sGuidCode(2) & sGuidCode(3) & sGuidCode(4)
+      End If
+      Return String.Empty
+   End Function
+
+   ' sostituisce i primi 5 caratteri della stringa con qualle passata
+   Friend Function UppDateGuidCode(ByRef sGuidCode As String, sPreGuidCode As String) As Boolean
+      If sPreGuidCode.Count = 5 Then
+         sGuidCode = sGuidCode.Remove(0, 5)
+         sGuidCode = sPreGuidCode & sGuidCode
+         Return True
+      End If
+      Return False
+   End Function
+
+   ' restituisce 5 caratteri 
+   Friend Function CreatePreGuidCode(nId As Integer) As String
+      ' recupero il frame dell'oggetto
+      Dim frGlobFrame As New Frame3d
+      If Not EgtGetGroupGlobFrame(nId, frGlobFrame) Then
+         Return String.Empty
+      End If
+      ' recupero il suo versore
+      Dim vtX As Vector3d = frGlobFrame.VersX
+      Dim Len As Double
+      Dim AngV As Double
+      Dim AngH As Double
+      vtX.ToSpherical(Len, AngV, AngH)
+      ' costruisco il codice (6 caratteri!) che identifica la posizione del pezzo in parcheggio
+      Dim sPreGuid As String = GetDirectionCode(AngH)
+      Return sPreGuid
+   End Function
+
+   Friend Function GetDirectionCode(dVal As Double) As String
+      Dim bIsNegative As Boolean = False
+      If dVal < 0 Then
+         dVal = dVal + (-1)
+         bIsNegative = True
+      End If
+      Dim sVal As String = DoubleToString(dVal * 1000, 0)
+      Dim nCount As Integer = sVal.Count
+      For Index As Integer = 1 To 4 - nCount
+         sVal = "0" & sVal
+      Next
+      Dim vVal As Char() = {"+", "1", "0", "0", "0"}
+      If bIsNegative Then
+         vVal = {"-"c, sVal(0), sVal(1), sVal(2), sVal(3)}
+      Else
+         vVal = {"+"c, sVal(0), sVal(1), sVal(2), sVal(3)}
+      End If
+      ' ricostruisco la stringa dotata di segno
+      sVal = vVal(0) & vVal(1) & vVal(2) & vVal(3) & vVal(4)
+      Return sVal
+   End Function
+
+#End Region    ' PreGiudCode
+
+
    Friend Function UIExprToExpr(sUIExpr As String) As String
       If String.IsNullOrWhiteSpace(sUIExpr) Then
          Return ""

WorkInProgress/WorkInProgressPageUC.xaml.vb

@@ -201,6 +201,9 @@ Public Class WorkInProgressPageUC
       End If
       EgtSetCurrPhase(nCurrPhase, True)
       EgtDraw()
+      ' Tempo di ritardo nel ciclo
+      Dim nTimeStep As Integer = 50
+      nTimeStep = GetPrivateProfileInt(S_MACH_INPROGRESS, K_WP_STEPTIME, nTimeStep, m_MainWindow.GetMachIniFile())
       ' Ciclo
       While m_bContinue
          ' Rileggo la variabile di fase
@@ -233,7 +236,7 @@ Public Class WorkInProgressPageUC
             EgtDraw()
          End If
          ' Per evitare di ciclare rapidissimamente e consumare inutilmente CPU
-         System.Threading.Thread.Sleep(10)
+         System.Threading.Thread.Sleep(nTimeStep)
          ' Leggo la fase
          If m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 3 Then
             m_MainWindow.m_CNCommunication.m_CN.n_DReadELS_handle = 0