Migliorata la scrittura del codice

CadCuts/CadCutPageUC.xaml.vb

@@ -107,6 +107,7 @@ Public Class CadCutPageUC
 
    Private Sub PhotoBtn_Click(sender As Object, e As RoutedEventArgs) Handles PhotoBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtSetCurrentContext(m_MainWindow.m_CurrentProjectPageUC.CurrentProjectScene.GetCtx())
       ' Se macchina fotografica collegata, faccio una foto
@@ -140,6 +141,7 @@ Public Class CadCutPageUC
 
    Private Sub RawPartBtn_Click(sender As Object, e As RoutedEventArgs) Handles RawPartBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
       m_CurrProjPage.CurrProjGrid.Visibility = Windows.Visibility.Hidden
       m_CurrProjPage.CurrentProjectPageGrid.Children.Remove(Me)
       m_CurrProjPage.CurrentProjectPageGrid.Children.Add(m_MainWindow.m_RawPartPage)
@@ -165,6 +167,7 @@ Public Class CadCutPageUC
 
    Private Sub DrawBtn_Click(sender As Object, e As RoutedEventArgs) Handles DrawBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_DrawPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Draw
@@ -172,6 +175,7 @@ Public Class CadCutPageUC
 
    Private Sub ImportBtn_Click(sender As Object, e As RoutedEventArgs) Handles ImportBtn.Click
       m_MainWindow.TestOff()
+      m_MainWindow.DragRettangleOff()
       m_MainWindow.MainWindowGrid.Children.Remove(m_MainWindow.m_CurrentProjectPageUC)
       m_MainWindow.MainWindowGrid.Children.Add(m_MainWindow.m_ImportPageUC)
       m_MainWindow.m_ActivePage = MainWindow.Pages.Import
@@ -193,10 +197,11 @@ Public Class CadCutPageUC
    End Sub
 
    Private Sub SplitBtn_Click(sender As Object, e As RoutedEventArgs) Handles SplitBtn.Click
+      m_MainWindow.DragRettangleOff()
       m_CurrProjPage.m_SceneButtons.MeasureBtn.IsChecked = False
       EgtDeselectObj(m_NestPage.m_CurrSelectedCurv)
       m_ProjectMgr.TestBtn.IsChecked = False
-      m_CurrProjPage.m_bSelectCurv = False
+      m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
       Select Case m_CadCutMode
          Case CadCutModes.Nest, CadCutModes.FastGrid
             ' Passo alla pagina Split
@@ -206,9 +211,9 @@ Public Class CadCutPageUC
                SplitImage.Source = New System.Windows.Media.Imaging.BitmapImage(New Uri("/Resources/NewIcons/Nest.png", UriKind.Relative))
             End If
             If m_CadCutMode = CadCutModes.Nest Then
-                  CadCutPageGrid.Children.Remove(m_NestPage)
-               Else
-                  CadCutPageGrid.Children.Remove(m_FastGridSlabManager)
+               CadCutPageGrid.Children.Remove(m_NestPage)
+            Else
+               CadCutPageGrid.Children.Remove(m_FastGridSlabManager)
             End If
             CadCutPageGrid.Children.Add(m_SplitPage)
             m_CadCutMode = CadCutModes.Split

CadCuts/NestPageUC.xaml

@@ -109,9 +109,14 @@
                 </Button>
             </UniformGrid>
 
-            <Button Name="RemovePartBtn" Grid.ColumnSpan="3" Grid.Row="6" Style="{DynamicResource OmagCut_YellowIconButton}">
-                <Image Source="{DynamicResource Elimina-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
-            </Button>
+            <UniformGrid Name ="UG1"  Grid.Column="0" Grid.Row="6" Grid.ColumnSpan="3" Columns="2" >
+                <Button Name="RemovePartBtn" Style="{DynamicResource OmagCut_YellowIconButton}">
+                    <Image Source="{DynamicResource Elimina-pezzoImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </Button>
+                <ToggleButton Name="DragRettanleBtn" Style="{DynamicResource OmagCut_YellowIconToggleButton}">
+                    <Image Source="{DynamicResource Drag_RettangleImg}" Style="{StaticResource OmagCut_ArrowButtonIcon}"/>
+                </ToggleButton>
+            </UniformGrid>
 
             <UniformGrid Grid.Column="0" Grid.Row="7" Grid.ColumnSpan="3" Columns="2" >
                 <Button Name="SelectAllBtn" Style="{DynamicResource OmagCut_YellowIconButton}">

CadCuts/NestPageUC.xaml.vb

@@ -12,10 +12,27 @@ Public Class NestPageUC
    Friend m_bRegister As Boolean = False
    ' Flag per pezzi selezionati in tavola o fuori
    Private m_nPartPos As Integer = PART_POS.NONE_TABLE
+   ' Flag per impostata per selezionare di una curva
+   Friend m_bSelectCurv As Boolean = False
+   ' dati per DragRettangoli (estensio/accorciamento dei rettangoli trascinando un lato)
+   Private m_bIsVisibleDragRettangle As Boolean = False
+   Friend m_bIsCheckedDragRettangle As Boolean = False
 
+   ' Id della curva e del taglio selezionati per eseguire il test
    Friend m_CurrSelectedCurv As Integer = GDB_ID.NULL
    Friend m_CurrSelectedSawCurv As Integer = GDB_ID.NULL
 
+   ' Id del rettangolo, del traglio e della curva da modificare tramite Drag
+   Private m_nIdSelectedOutLoopRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedRegionRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedSawRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedCurvRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedTextRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedTextTopRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedFlatSurfRettangle As Integer = GDB_ID.NULL
+   Private m_SideListRettangle(4) As Integer
+   Private m_sTextContent As String = String.Empty
+
    Enum PART_POS As Integer
       IN_TABLE = -1
       NONE_TABLE = 0
@@ -61,6 +78,14 @@ Public Class NestPageUC
       RemovePartBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 3)            'Remove part - Elimina pezzo
       SelectAllBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 4)             'Select All - Seleziona Tutto
       DeselectAllBtn.ToolTip = EgtMsg(MSG_NESTPAGEUC + 5)           'Deselect All - Deseleziona Tutto
+
+      ' gestisco la visualizzazione del comando PAN (per il drag dei rettangoli)
+      m_bIsVisibleDragRettangle = (GetPrivateProfileInt(S_NEST, K_DRAG_RETTANGLE, 0, m_MainWindow.GetIniFile()) <> 0)
+      If Not m_bIsVisibleDragRettangle Then
+         UG1.Columns = 1
+         DragRettanleBtn.Visibility = Visibility.Collapsed
+      End If
+
    End Sub
 
    Private Sub NestPage_Loaded(sender As Object, e As RoutedEventArgs)
@@ -108,6 +133,7 @@ Public Class NestPageUC
       m_dRegStep = GetPrivateProfileDouble(S_REG, K_REGSTEP, 10, m_MainWindow.GetIniFile())
       m_dRegAngStep = GetPrivateProfileDouble(S_REG, K_REGANGSTEP, 1, m_MainWindow.GetIniFile())
       m_dMaxRegAng = GetPrivateProfileDouble(S_MACH_REG, K_MACH_MAX_ROT_ANG, 10, m_MainWindow.GetMachIniFile())
+
       ' Garantisco visibilità pezzi parcheggiati
       ShowParkedParts()
       ' Garantisco visibilità eventuale contorno da foto
@@ -124,14 +150,17 @@ Public Class NestPageUC
       End If
    End Sub
 
-   Private Sub OnMyMouseDownSceneSelCurv(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownSceneSelCurv
+   ' funzione utilizzata per la selezione dei tagli quando il comando TEST è attivo
+   Private Sub OnMyMouseDownSceneSelCurv(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Verifico di essere il gestore attivo e non in modalità registrazione
       If Not m_bActive Or m_bRegister Then Return
       ' Si può selezionare solo con il tasto sinistro e se il bottone TEST Attivo
       If e.Button <> Windows.Forms.MouseButtons.Left Or
-         Not m_CurrProjPage.m_bSelectCurv Then
+         Not m_bSelectCurv Then
          Return
       End If
+      ' Se esiste un elemento selezionato
+      EgtResetMark(m_CurrSelectedSawCurv)
       ' provo a riconoscere il valore medio del segmento 
       ' Verifico se selezionato indicativo di pezzo
       EgtSetObjFilterForSelWin(False, True, False, False, False)
@@ -152,7 +181,6 @@ Public Class NestPageUC
                Dim ptE As Point3d
                EgtEndPoint(nIdMy, ptE)
                If m_CurrSelectedCurv <> GDB_ID.NULL Or m_CurrSelectedCurv = nIdMy Then
-                  EgtDeselectObj(m_CurrSelectedSawCurv)
                   EgtDeselectObj(m_CurrSelectedCurv)
                End If
                ' recupero il gruppo della lavorazione associata
@@ -160,10 +188,9 @@ Public Class NestPageUC
                Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, "PV")
                Dim nIdSaw As Integer = EgtGetFirstNameInGroup(nIdPV, "Saw" & nIdMy.ToString)
                If Not EgtGetGroupObjs(nIdSaw) Then
-                  EgtSelectObj(nIdSaw)
                   m_CurrSelectedSawCurv = nIdSaw
                   m_CurrSelectedCurv = nIdMy
-                  EgtSelectObj(nIdSaw)
+                  EgtSetMark(nIdSaw)
                   EgtSelectObj(nIdMy)
                   EgtDraw()
                   Exit While
@@ -176,6 +203,293 @@ Public Class NestPageUC
       Return
    End Sub
 
+#Region "DRAG RETTANGLE"
+
+   ' funzione chiamata da OnMyMouseMoveScene: verifica che la selezione sia corretta (deve essere il lato di una figura rettangolare)
+   Private Sub OnMyMouseDownSceneSelSideRettangle(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Verifico di essere il gestore attivo e non in modalità registrazione
+      If Not m_bActive Or m_bRegister Then Return
+      ' Si può selezionare solo con il tasto sinistro e se il bottone TEST Attivo
+      If e.Button <> Windows.Forms.MouseButtons.Left then
+         Return
+      End If
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sLayer As String = String.Empty
+         ' layer di origine
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del Layer
+         EgtGetName(nIdParent, sLayer)
+         ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
+         If sLayer = NAME_OUTLOOP Then
+            If EgtGetType(nIdMy) = GDB_TY.CRV_LINE Then
+               ' -------------------------------- INIZIO VERIFICHE --------------------------------
+               m_nIdSelectedOutLoopRettangle = nIdParent
+               If Not IsRettangle(m_SideListRettangle) Then
+                  m_CurrProjPage.ClearMessage()
+                  m_CurrProjPage.SetWarningMessage("Non è un rettangolo (0)")
+                  Return
+               End If
+               ' recupero il gruppo della lavorazione associata
+               Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, "PV")
+               ' se non esiste un gruppo di lavorazione associato allora esco
+               If nIdPV = GDB_ID.NULL Then
+                  m_CurrProjPage.ClearMessage()
+                  m_CurrProjPage.SetWarningMessage("Pezzo in parcheggio (1)")
+                  Return
+               End If
+               ' se esiste ma è vuoto (pezzo scaricato da tavola)
+               If EgtGetFirstInGroup(nIdPV) = GDB_ID.NULL Then
+                  m_CurrProjPage.ClearMessage()
+                  m_CurrProjPage.SetWarningMessage("Pezzo in parcheggio (2)")
+                  Return
+               End If
+               ' Devo verificare che sia una lavorazione solo di lama?
+               Dim nIdSaw As Integer = EgtGetFirstNameInGroup(nIdPV, "Saw" & nIdMy.ToString)
+               ' -------------------------------- FINE VERIFICHE --------------------------------
+
+               If Not EgtGetGroupObjs(nIdSaw) Then
+                  m_nIdSelectedSawRettangle = nIdSaw
+                  m_nIdSelectedCurvRettangle = nIdMy
+
+                  m_nIdSelectedRegionRettangle = EgtGetFirstNameInGroup(nIdParentPart, NAME_REGION)
+                  ' recupero i testi cintenuti nel layer Region
+                  If m_nIdSelectedRegionRettangle <> GDB_ID.NULL Then
+                     Dim nCurrId As Integer = EgtGetFirstInGroup(m_nIdSelectedRegionRettangle)
+                     While nCurrId <> GDB_ID.NULL
+                        If EgtGetType(nCurrId) = GDB_TY.EXT_TEXT Then
+                           Dim sVal As String = String.Empty
+                           EgtTextGetContent(nCurrId, sVal)
+                           If sVal = "*TOP*" Then
+                              m_nIdSelectedTextTopRettangle = nCurrId
+                           Else
+                              m_nIdSelectedTextRettangle = nCurrId
+                              m_sTextContent = GetMyRettangleText(sVal)
+                           End If
+                        ElseIf EgtGetType(nCurrId) = GDB_TY.SRF_FRGN Then
+                           m_nIdSelectedFlatSurfRettangle = nCurrId
+                        End If
+                        nCurrId = EgtGetNext(nCurrId)
+                     End While
+                  End If
+                  ' seleziono ed evidenzio il lato selezionato
+                  EgtSelectObj(nIdSaw)
+                  EgtSetMark(nIdSaw)
+                  EgtSelectObj(nIdMy)
+                  EgtDraw()
+                  Exit While
+               End If
+            End If
+            ' se le'elemto corrente non è una linea
+         End If
+         ' se le'elemto corrente non appartiene al layer OutLoop passo al prossimo elemento dell'elenco
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+   End Sub
+
+   ' restituisce il valore del Text ripulito dalle dimensioni
+   Private Function GetMyRettangleText(sTextPz As String) As String
+      ' da DrawPageUC.xaml.vb/MultipleInsert
+      Dim sText As String = String.Empty
+      If sTextPz.Contains("<br/>") Then
+         Dim nLastIndex As Integer = sTextPz.LastIndexOf(">")
+         sText = sTextPz.Remove(nLastIndex + 1)
+         Return sText
+      End If
+      If sTextPz.Contains("  ") Then
+         Dim sInfo() As String = sTextPz.Split(" ")
+         If sInfo.Count > 3 Then
+            Return sText = sInfo(0) & "  " & sInfo(1) & "  "
+         End If
+      End If
+      Return sText
+   End Function
+
+   ' verifico che la figura selezionata sia realmente un rettangolo
+   Private Function IsRettangle(ByRef IdSideList() As Integer) As Boolean
+      ' creo una lista con i lati del rettangolo
+      Dim nCounter As Integer = 0
+      ' recupero i lati dal leyer "OutLoop"
+      Dim IdSideRettangle As Integer = EgtGetFirstInGroup(m_nIdSelectedOutLoopRettangle)
+      While IdSideRettangle <> GDB_ID.NULL And nCounter < 4
+         Dim sVal As String = String.Empty
+         Dim dPrevAng As Double = 0
+         EgtGetInfo(IdSideRettangle, "PrevAng", sVal)
+         StringToDouble(sVal, dPrevAng)
+         Dim dNextAng As Double = 0
+         EgtGetInfo(IdSideRettangle, "NextAng", sVal)
+         StringToDouble(sVal, dNextAng)
+         ' se gli angoli non sono retti allora esco senza caricare il lato corrente
+         If Math.Abs(dPrevAng - 90) > EPS_ANG_SMALL OrElse Math.Abs(dNextAng - 90) > EPS_ANG_SMALL Then
+            Exit While
+         End If
+         IdSideList(nCounter) = IdSideRettangle
+         nCounter += 1
+         IdSideRettangle = EgtGetNext(IdSideRettangle)
+      End While
+      ' verifico che siano solo quattro lati
+      If IdSideRettangle = GDB_ID.NULL And nCounter = 4 Then
+         ' solo se la figura ha 4 lati ortogonali
+         Return True
+      End If
+
+      m_nIdSelectedOutLoopRettangle = GDB_ID.NULL
+      ' la figura presenta più/meno di 4 lati    
+      Return False
+   End Function
+
+   ' recupero le informazioni correnti per sapere se la figura è mdificabile
+   Private Function GetRettangleInfoScale(ByRef frFixed As Frame3d, ByRef MaxLen As Double, ByRef MinLen As Double) As Vector3d
+      ' determino la direzione del lato selezionato
+      Dim vtDirSelectedCurv As New Vector3d
+      EgtStartVector(m_nIdSelectedCurvRettangle, GDB_ID.ROOT, vtDirSelectedCurv)
+
+      ' recupero il lato successivo a quello selezionato 
+      Dim Index As Integer = 0
+      Dim Len As Double = 0
+      For Ind As Integer = 0 To 3
+         If m_SideListRettangle(Ind) = m_nIdSelectedCurvRettangle Then
+            ' verifico se esiste un lato Precedente altrimenti recupero l'ultimo della lista
+            If Ind = 0 Then
+               Index = 3
+            Else
+               Index = Ind - 1
+            End If
+         End If
+      Next
+      ' recupero la dimensione del lato
+      EgtCurveLength(m_SideListRettangle(Index), MaxLen)
+      EgtCurveLength(m_nIdSelectedCurvRettangle, MinLen)
+
+      ' verifico che il lato selezionato sia il maggiore
+      If MinLen > MaxLen Then Return Nothing
+
+      ' determimo il versore dal lato appena calcolato
+      Dim vtDir As New Vector3d
+
+      EgtStartVector(m_SideListRettangle(Index), GDB_ID.ROOT, vtDir)
+      vtDir.Normalize()
+      Dim dProjectionBaseX As Double = vtDir * Vector3d.X_AX
+      Dim ptFixed As New Point3d
+      EgtStartPoint(m_SideListRettangle(Index), GDB_ID.ROOT, ptFixed)
+
+      Dim vtPerp As New Vector3d(vtDir.x, vtDir.y, vtDir.z)
+      vtPerp.Rotate(Vector3d.Z_AX, 90)
+
+      ' determino il Frame corrente
+      frFixed = New Frame3d(ptFixed, vtDir, vtPerp, Vector3d.Z_AX)
+
+      Return vtDir
+
+   End Function
+
+   ' funzione chiamata da OnMyMouseMoveScene: gestisce la modifica lungo una dimensione del rettangolo selezionato
+   Private Sub OnMyMouseMoveSawRettangle(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Verifico di essere il gestore attivo
+      If Not m_bActive Then Return
+      ' Se drag non abilitato o già in esecuzione, esco
+      If Not m_bDrag Or m_bDragging Then Return
+      ' Se primo movimento di drag, verifico di aver superato la soglia di movimento in pixel
+      If m_bDragToStart Then
+         If Math.Abs(e.Location.X - m_locPrev.X) < m_nRestRadius And
+            Math.Abs(e.Location.Y - m_locPrev.Y) < m_nRestRadius Then
+            Return
+         End If
+         m_bDragToStart = False
+      End If
+
+      ' riferiemento che deve rimanere fisso del rettangolo 
+      Dim frFixed As Frame3d = Nothing
+      ' lunghezza del lato da modificare
+      Dim MaxLen As Double = 0
+      Dim MinLen As Double = 0
+      ' recupero info sul rettangolo selezionato
+      Dim vtDir As Vector3d = GetRettangleInfoScale(frFixed, MaxLen, MinLen)
+      If vtDir.Equals(Vector3d.NULL) Then
+         Return
+      End If
+
+      ' Inizio esecuzione di drag
+      m_bDragging = True
+
+      ' Ricavo il punto corrente in coordinate mondo
+      Dim ptCurr As Point3d
+      EgtUnProjectPoint(e.Location, ptCurr)
+      ' Ricavo il vettore di movimento
+      Dim vtMove As Vector3d = ptCurr - m_ptPrev
+      ' ricavo il valore efficace di allungamento (la proiezione)
+      Dim dProjection As Double = vtMove * vtDir
+      vtMove = vtDir * dProjection
+      ' recupero il valore di scalatura
+      Dim dScalefactor = dProjection / MaxLen + 1
+
+      ' Modifico dimensione figura
+      If Math.Abs(dScalefactor) > EPS_SMALL * EPS_SMALL Then
+         EgtScale(m_nIdSelectedOutLoopRettangle, frFixed, dScalefactor, 1, 1, GDB_ID.ROOT)
+         EgtScale(m_nIdSelectedFlatSurfRettangle, frFixed, dScalefactor, 1, 1, GDB_ID.ROOT)
+         Dim ptCen As Point3d
+         EgtCenterPoint(m_nIdSelectedTextRettangle, ptCen)
+         EgtModifyText(m_nIdSelectedTextRettangle, m_sTextContent & LenToString(MaxLen + dProjection, 2) & " x " & LenToString(MinLen, 2))
+         EgtMove(m_nIdSelectedTextRettangle, vtMove * 0.5)
+         If m_nIdSelectedTextTopRettangle <> GDB_ID.NULL Then
+            EgtMove(m_nIdSelectedTextTopRettangle, vtMove * 0.5)
+         End If
+      End If
+
+      Dim nWarn As Integer = 0
+      ResetAllMachinings(nWarn)
+      EnableReferenceRegion(False)
+      ' se la modifica genera un errore allora ripristino la figura prima della defomrazione
+      If Not EgtVerifyPart(EgtGetParent(m_nIdSelectedOutLoopRettangle), True) Then
+         EgtScale(m_nIdSelectedOutLoopRettangle, frFixed, 1 / dScalefactor, 1, 1, GDB_ID.ROOT)
+         EgtScale(m_nIdSelectedFlatSurfRettangle, frFixed, 1 / dScalefactor, 1, 1, GDB_ID.ROOT)
+         Dim ptCen As Point3d
+         EgtCenterPoint(m_nIdSelectedTextRettangle, ptCen)
+         EgtModifyText(m_nIdSelectedTextRettangle, m_sTextContent & LenToString(MaxLen, 2) & " x " & LenToString(MinLen, 2))
+         EgtMove(m_nIdSelectedTextRettangle, -vtMove * 0.5)
+         If m_nIdSelectedTextTopRettangle <> GDB_ID.NULL Then
+            EgtMove(m_nIdSelectedTextTopRettangle, -vtMove * 0.5)
+         End If
+      End If
+
+      EgtDraw()
+      ' Aggiorno il punto precedente
+      m_ptPrev = ptCurr
+      ' Terminata esecuzione di drag
+      m_bDragging = False
+   End Sub
+
+   ' funzione chiamata da OnMyMouseUp: gestisce il reset di tutti gli indici in uso 
+   Public Sub ResetDragRettangleParam()
+      ' deseleziono l'elemento corrente
+      EgtDeselectObj(m_nIdSelectedSawRettangle)
+      EgtDeselectObj(m_nIdSelectedCurvRettangle)
+      EgtResetMark(m_nIdSelectedSawRettangle)
+      ' resetto gli indici
+      m_nIdSelectedOutLoopRettangle = GDB_ID.NULL
+      m_nIdSelectedRegionRettangle = GDB_ID.NULL
+      m_nIdSelectedSawRettangle = GDB_ID.NULL
+      m_nIdSelectedCurvRettangle = GDB_ID.NULL
+      m_nIdSelectedTextRettangle = GDB_ID.NULL
+      m_nIdSelectedTextTopRettangle = GDB_ID.NULL
+      m_nIdSelectedFlatSurfRettangle = GDB_ID.NULL
+      m_SideListRettangle = {GDB_ID.NULL, GDB_ID.NULL, GDB_ID.NULL, GDB_ID.NULL}
+      m_sTextContent = String.Empty
+      ' disattivo il drag
+      m_bDrag = False
+      ' aggiorno le lavorazioni
+      Dim nWarn As Integer = 0
+      ResetAllMachinings(nWarn)
+      EgtDraw()
+   End Sub
+
+#End Region    ' Drag Rettangolo
+
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseDownScene
       ' Verifico di essere il gestore attivo e non in modalità registrazione
       If Not m_bActive Or m_bRegister Then Return
@@ -184,6 +498,25 @@ Public Class NestPageUC
          Not m_CurrProjPage.CurrentProjectScene.IsStatusNull() Then
          Return
       End If
+
+      ' se in modalità slezione tagli
+      If m_bSelectCurv Then
+         OnMyMouseDownSceneSelCurv(sender, e)
+         Return
+      End If
+
+      ' se in modalità DragRettangle (deformazione delle componenti rettangolari)
+      If m_bIsCheckedDragRettangle Then
+         OnMyMouseDownSceneSelSideRettangle(sender, e)
+         ' Dati per drag (abilito il Drag)
+         m_locPrev = e.Location
+         m_bDrag = EgtUnProjectPoint(e.Location, m_ptPrev) And m_nIdSelectedCurvRettangle <> GDB_ID.NULL
+         m_bDragToStart = m_bDrag
+         m_bVerify = m_bDrag AndAlso (Keyboard.Modifiers And ModifierKeys.Shift) > 0
+         m_vtTotMove = Vector3d.NULL()
+         Return
+      End If
+
       ' Per default no drag
       m_bDrag = False
       ' Verifico se selezionato indicativo di pezzo
@@ -218,15 +551,15 @@ Public Class NestPageUC
                ' se non è stata eseguita nessuna scelta esco dal ciclo 
                If nRes = 0 Then Exit While
                ' imposto l'altra tavola
-               Dim sOtherTab = If( sNamePartId = MAIN_TAB, SECOND_TAB, MAIN_TAB)
-               EgtChangeTable( sOtherTab, True)
-               m_CurrProjPage.AdjustAdditionalTable( True)
+               Dim sOtherTab = If(sNamePartId = MAIN_TAB, SECOND_TAB, MAIN_TAB)
+               EgtChangeTable(sOtherTab, True)
+               m_CurrProjPage.AdjustAdditionalTable(True)
                EgtSetMachineLook(MCH_LOOK.TAB)
                ' aggiorno le lavorazioni
                UpdateAllMachiningsToolpaths()
                ' aggiorno i movimenti pezzi tra disposizioni
-               For nI As Integer = 1  To EgtGetPhaseCount()
-                  EgtSetCurrPhase( nI)
+               For nI As Integer = 1 To EgtGetPhaseCount()
+                  EgtSetCurrPhase(nI)
                   Dim nDispId As Integer = EgtGetPhaseDisposition(nI)
                   SpecialApplyDisposition(nDispId, True)
                Next
@@ -239,31 +572,31 @@ Public Class NestPageUC
                Dim nPPId As Integer = EgtGetFirstPart()
                While nPPId <> GDB_ID.NULL
                   PackPartInStore(nPPId)
-                  nPPId = EgtGetNextPart( nPPId)
+                  nPPId = EgtGetNextPart(nPPId)
                End While
                ' se prevista rotazione
                If GetPrivateProfileInt(S_TABLE, K_CHANGETABWD, 0, m_MainWindow.GetMachIniFile()) = 2 Then
                   ' Dati tavola
                   Dim b3Tab As New BBox3d
-                  EgtGetTableArea( 1, b3Tab)
+                  EgtGetTableArea(1, b3Tab)
                   ' Box lastra
                   Dim b3OrigRaw As New BBox3d
-                  GetRawBox( b3OrigRaw)
+                  GetRawBox(b3OrigRaw)
                   ' Allargo i limiti della tavola in tutte le fasi
                   Const TAB_OFFS As Double = 3000
                   For nI As Integer = 1 To EgtGetPhaseCount()
                      EgtSetCurrPhase(nI)
-                     EgtSetTableAreaOffset( TAB_OFFS, TAB_OFFS, TAB_OFFS, TAB_OFFS) 
+                     EgtSetTableAreaOffset(TAB_OFFS, TAB_OFFS, TAB_OFFS, TAB_OFFS)
                   Next
                   EgtSetCurrPhase(1)
                   ' Rotazione
                   Dim dAngRot As Double = If(sOtherTab = SECOND_TAB, 180, -180)
-                  if Not RotateAllRawParts(dAngRot, False) Then
+                  If Not RotateAllRawParts(dAngRot, False) Then
                      m_CurrProjPage.SetWarningMessage(EgtMsg(90339))        'Rotazione impossibile
                   End If
                   ' Traslazione per riportare la lastra nella stessa posizione rispetto all'angolo BL che diveta TR e viceversa
                   Dim b3Raw As New BBox3d
-                  GetRawBox( b3Raw)
+                  GetRawBox(b3Raw)
                   Dim vtMove As Vector3d
                   If sOtherTab = SECOND_TAB Then
                      Dim vtDiffIni As Vector3d = b3OrigRaw.Min() - b3Tab.Min()
@@ -272,14 +605,14 @@ Public Class NestPageUC
                   Else
                      Dim vtDiffIni As Vector3d = b3Tab.Max() - b3OrigRaw.Max()
                      Dim vtDiffFin As Vector3d = b3Raw.Min() - b3Tab.Min()
-                     vtMove = -( vtDiffFin - vtDiffIni)
+                     vtMove = -(vtDiffFin - vtDiffIni)
                   End If
                   vtMove.z = 0
                   MoveAllRawParts(vtMove)
                   ' Ripristino i limiti della tavola in tutte le fasi
                   For nI As Integer = 1 To EgtGetPhaseCount()
                      EgtSetCurrPhase(nI)
-                     EgtSetTableAreaOffset( 0, 0, 0, 0) 
+                     EgtSetTableAreaOffset(0, 0, 0, 0)
                   Next
                   EgtSetCurrPhase(1)
                   HideAllMachinings()
@@ -312,6 +645,13 @@ Public Class NestPageUC
          End If
          m_bDragToStart = False
       End If
+
+      ' se devo muovere un lato del rettangolo
+      If m_bIsCheckedDragRettangle Then
+         OnMyMouseMoveSawRettangle(sender, e)
+         Return
+      End If
+
       ' Determino cosa muovere
       Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
       ' Verifico se in tavola o in parcheggio
@@ -402,6 +742,15 @@ Public Class NestPageUC
    Private Sub OnMyMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles m_CurrProjPage.OnMouseUpScene
       ' Verifico di essere il gestore attivo
       If Not m_bActive Then Return
+      ' verifico che non sia attivo il comando Test
+      If m_bSelectCurv Then Return
+      ' verifico che non sia attivo il comando di Drag dei rettangoli
+      If m_bIsCheckedDragRettangle Then
+         ' deseleziono gli oggeti, resetto le variabili usate, aggiorno il disegno
+         ResetDragRettangleParam()
+         Return
+      End If
+
       ' Se eseguito drag
       If Not m_bDragToStart Then
          ' Se movimento con sola verifica finale
@@ -412,16 +761,16 @@ Public Class NestPageUC
             UpdateNestRegions()
             EnableReferenceRegion(False)
             ' Eseguo verifica
-            If VerifyTrfData( nMoveId) And EgtVerifyPart( nMoveId, m_bReducedCut) Then
+            If VerifyTrfData(nMoveId) And EgtVerifyPart(nMoveId, m_bReducedCut) Then
                m_CurrProjPage.ResetOrderMachiningFlag()
-            ' Non superata riporto alla posizione iniziale
+               ' Non superata riporto alla posizione iniziale
             Else
                If m_bFromParking Then
                   m_CurrProjPage.ClearMessage()
-                  PreRemoveOnePart( nMoveId)
-                  VeinMatching.OnRemovePartFromRaw( nMoveId)
+                  PreRemoveOnePart(nMoveId)
+                  VeinMatching.OnRemovePartFromRaw(nMoveId)
                Else
-                  EgtMove( nMoveId, -m_vtTotMove)
+                  EgtMove(nMoveId, -m_vtTotMove)
                   ' Eventuale notifica al VeinMatching
                   If nMoveId = GDB_ID.SEL Then
                      Dim nId As Integer = EgtGetFirstSelectedObj()
@@ -435,11 +784,11 @@ Public Class NestPageUC
                End If
             End If
             m_bFromParking = False
-         ' altrimenti caso con verifica durante il movimento
+            ' altrimenti caso con verifica durante il movimento
          Else
             ' Basta reset alla fine
          End If
-      ' Se selezione da eseguire
+         ' Se selezione da eseguire
       ElseIf m_nIdToSel <> GDB_ID.NULL Then
          ' Determino se pezzo in tavola o in parcheggio
          Dim bPartInTable As Boolean = (EgtGetParent(m_nIdToSel) = m_nRawId)
@@ -456,7 +805,7 @@ Public Class NestPageUC
          VeinMatching.OnSelectPart(m_nIdToSel)
          ' Set flag posizione selezionati
          m_nPartPos = If(bPartInTable, PART_POS.IN_TABLE, PART_POS.OUT_TABLE)
-      ' Se deselezione da eseguire
+         ' Se deselezione da eseguire
       ElseIf m_nIdToDesel <> GDB_ID.NULL Then
          EgtDeselectObj(m_nIdToDesel)
          ' Eventuale aggiornamento VeinMatching
@@ -1232,6 +1581,18 @@ Public Class NestPageUC
       Return True
    End Function
 
+   Private Sub DragRettangle_Click() Handles DragRettanleBtn.Click
+      If DragRettanleBtn.IsChecked Then
+         m_bIsCheckedDragRettangle = True
+      Else
+         m_bIsCheckedDragRettangle = False
+         ResetDragRettangleParam()
+         m_CurrProjPage.ClearMessage()
+         ShowParkedParts()
+      End If
+      EgtDraw()
+   End Sub
+
    Private Sub StorePartBtn_Click(sender As Object, e As RoutedEventArgs) Handles StorePartBtn.Click
       EgtSetCurrentContext(m_CurrProjPage.CurrentProjectScene.GetCtx())
       ' Ciclo di parcheggio dei pezzi selezionati

CadCuts/SplitPageUC.xaml.vb

@@ -1191,8 +1191,8 @@ Public Class SplitPageUC
                UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
                bRepeat = Not UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
                If bRepeat Then
-                  EgtSetMachiningParam(MCH_MP.STARTADDLEN, dOrigUeal)
-                  EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUeal)
+                  EgtSetMachiningParam(MCH_MP.ENDADDLEN, dOrigUeal)
+                  EgtSetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
                   dUeal = dOrigUeal
                End If
             Loop Until Not bRepeat

Constants/ConstIni.vb

@@ -148,6 +148,7 @@ Module ConstIni
    Public Const K_TEXTCOLOR As String = "TextColor"
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
+   Public Const K_DRAG_RETTANGLE As String = "DragRettangle"
 
    Public Const S_SPLIT As String = "Split"
    Public Const K_MOVE_LEV As String = "MoveLevel"

Constants/ConstMachIni.vb

@@ -282,5 +282,6 @@
    Public Const S_MATERIALS As String = "Materials"
    Public Const K_CURRMATERIAL As String = "CurrMaterial"
    Public Const K_MATERIAL As String = "Material"
+   Public Const K_FROMDBWATERJET As String = "FromDBWaterJet"
 
 End Module

DirectCuts/DirectCutPageUC.xaml.vb

@@ -133,25 +133,6 @@ Public Class DirectCutPageUC
       ' leggo il numero di assi attivi nella macchina
       Dim AxesNumber = GetPrivateProfileInt(S_AXES, K_AXESNUM, 5, m_MainWindow.GetMachIniFile())
 
-      '' leggo se è stata configurata la nuova conole
-      'If GetPrivateProfileInt(S_NCDATA, K_NEWCONSOLE, 0, m_MainWindow.GetMachIniFile()) = 1 And Not bCollapsedNewBottonsConsole Then
-      '   XYBtn.Content = "X - Y"
-      '   XYBtn.Foreground = Brushes.White
-      '   ZCBtn.Content = "Z - C"
-      '   ZCBtn.Foreground = Brushes.White
-      '   If AxesNumber < 5 Then
-      '      ZBBtn.Visibility = Windows.Visibility.Collapsed
-      '   End If
-      '   ZBBtn.Content = "Z - B"
-      '   ZBBtn.Foreground = Brushes.White
-      '   RemoteBtn.Content = "Remote"
-      '   RemoteBtn.Foreground = Brushes.White
-      'Else
-      '   XYBtn.Visibility = Windows.Visibility.Collapsed
-      '   ZCBtn.Visibility = Windows.Visibility.Collapsed
-      '   ZBBtn.Visibility = Windows.Visibility.Collapsed
-      'End If
-
    End Sub
 
    Private Sub DirectCutPage_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
@@ -228,8 +209,12 @@ Public Class DirectCutPageUC
       ' Se macchina fotografica abilitata
       PhotoBtn.IsEnabled = m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.MAN_PHOTO)
 
-      ' Attivo le lavorazioni solo se esiste il grezzo
+      ' Attivo le lavorazioni solo se esiste il grezzo e se presente testa H1
       Dim bRawOk As Boolean = (GetRawHeight() > EPS_SMALL)
+      Dim bH1Exists As Boolean = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+
+      ManualBtn.IsEnabled = bH1Exists
+      ' sviluppo rimasto in sospeso
       If m_bManulaCut Then
          ' anche se non è presente un grezzo mantengo abilitato il bottone
          SingleCutBtn.IsEnabled = True
@@ -238,10 +223,14 @@ Public Class DirectCutPageUC
       End If
       MultipleCutBtn.IsEnabled = bRawOk
       GridCutBtn.IsEnabled = bRawOk
-      SingleDrillBtn.IsEnabled = bRawOk
-      FlatteningCutBtn.IsEnabled = bRawOk
+      SingleDrillBtn.IsEnabled = (bRawOk And bH1Exists)
+      FlatteningCutBtn.IsEnabled = (bRawOk And bH1Exists)
       PolishingBtn.IsEnabled = (bRawOk And m_MainWindow.m_CurrentMachine.bPolishing)
-      SawTestBtn.IsEnabled = bRawOk
+      SawTestBtn.IsEnabled = (bRawOk And bH1Exists)
+      CopyTemplateBtn.IsEnabled = bH1Exists
+
+      ' aggiorno la visualizzazione dei parametri
+      ReloadParam()
 
       ' Nascondo i pezzi in parcheggio
       HideParkedParts()
@@ -249,6 +238,20 @@ Public Class DirectCutPageUC
 
    End Sub
 
+   Public Sub ReloadParam()
+      Dim sCurrSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
+      Dim sCurrSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim bSaw As Boolean = False
+
+      ' se esiste una lavorazione di lama corrente vuol dire che deve essere preferita
+      If Not String.IsNullOrEmpty(sCurrSaw) And Not String.IsNullOrEmpty(sCurrSawing) Then
+         bSaw = EgtSetCalcTool(sCurrSaw, "H1", 1)
+      End If
+      m_SingleCut.SetEnableParam(bSaw)
+      m_MultipleCut.SetEnableParam(bSaw)
+      m_GridCut.SetEnableParam(bSaw)
+   End Sub
+
    Private Sub SetVisibilityJogButtuns()
       XYBtn.Visibility = Visibility.Collapsed
       ZCBtn.Visibility = Visibility.Collapsed

DirectCuts/GridCut.xaml.vb

@@ -152,6 +152,7 @@ Public Class GridCut
       EgtDraw()
    End Sub
 
+
    Friend Sub GridCut_Unloaded(sender As Object, e As RoutedEventArgs) Handles Me.Unloaded
       ' Salvo i dati correnti
       WritePrivateProfileString( S_DIRECTCUTS, K_DC_GRID_DEPTH, DoubleToString( m_dDepth, 2), m_MainWindow.GetIniFile())
@@ -185,6 +186,11 @@ Public Class GridCut
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      ' se macchina solo WaterJet Disabilito/Nascondo parametri della lama
+      DepthTxBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -242,6 +248,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -256,12 +268,12 @@ Public Class GridCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
          End If
@@ -285,10 +297,8 @@ Public Class GridCut
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Disegno il taglio
@@ -317,6 +327,12 @@ Public Class GridCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -331,12 +347,12 @@ Public Class GridCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
          End If
@@ -358,10 +374,8 @@ Public Class GridCut
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio

DirectCuts/MultipleCut.xaml.vb

@@ -213,6 +213,10 @@ Public Class MultipleCut
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      DepthTxBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -270,6 +274,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -284,12 +294,14 @@ Public Class MultipleCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
          End If
@@ -312,10 +324,9 @@ Public Class MultipleCut
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
       ' Disegno il taglio
       CreateMultipleCut()
@@ -343,6 +354,12 @@ Public Class MultipleCut
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
 
@@ -357,12 +374,12 @@ Public Class MultipleCut
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
          End If
@@ -383,10 +400,9 @@ Public Class MultipleCut
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio

DirectCuts/SingleCutUC.xaml.vb

@@ -137,6 +137,9 @@ Public Class SingleCutUC
       Point2Btn.IsEnabled = False
       ' Deseleziono bottone primo punto
       Point1Btn.IsChecked = False
+
+      ' la visualizzazione dei comandi è gestira dalla DirectCutPageUC richiamando la funzione ReloadParam
+
       ' Aggiorno visualizzazione
       EgtDraw()
    End Sub
@@ -172,6 +175,12 @@ Public Class SingleCutUC
       m_bActive = False
    End Sub
 
+   Public Sub SetEnableParam(ByVal bIsSaw As Boolean)
+      ' se macchina solo WaterJet Disabilito/Nascondo parametri della lama
+      DepthTxBx.IsEnabled = bIsSaw
+      SawThChBx.IsEnabled = bIsSaw
+   End Sub
+
    Private Sub UpdateSimulOkBtn()
       If m_bCutOk Then
          SimulBtn.IsEnabled = True
@@ -229,6 +238,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizione lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
@@ -242,12 +257,12 @@ Public Class SingleCutUC
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP1) Then Return
          End If
@@ -271,10 +286,9 @@ Public Class SingleCutUC
          ' Porto il tip nell'origine tavola
          m_ptTipP1.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP1Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
+
       End If
 
       ' Disegno il taglio
@@ -303,6 +317,12 @@ Public Class SingleCutUC
       ' Verifico configurazione tavola e grezzo
       If Not m_bRawOk Then Return
 
+      ' Recupero dati utensile e testa corrente
+      Dim sTool As String = ""
+      Dim sHead As String = ""
+      Dim nExit As Integer = 0
+      EgtGetCalcTool(sTool, sHead, nExit)
+
       ' Se acquisizone lama o laser
       If PointModeCmBx.SelectedIndex = PT_MODE.SAW Or PointModeCmBx.SelectedIndex = PT_MODE.LASER Then
          ' Recupero la posizione macchina
@@ -316,12 +336,14 @@ Public Class SingleCutUC
             If Not EgtSetCalcTool("", "H3", 1) Then Return
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
-            ' Ora imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
-         ' Altrimenti da lama
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
+            ' Altrimenti da lama
          Else
-            ' Imposto la lama corrente
-            If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+            ' Reimposto eventuale precedente utensile
+            EgtSetCalcTool(sTool, sHead, nExit)
+
             ' Trasformo in posizione punta utensile in basso
             If Not EgtGetCalcTipFromPositions(dL1, dL2, dL3, dR1, dR2, True, m_ptTipP2) Then Return
          End If
@@ -343,10 +365,8 @@ Public Class SingleCutUC
          ' Porto il tip nell'origine tavola
          m_ptTipP2.ToLoc(New Frame3d(m_ptTabOri))
          m_bPointP2Ok = True
-         ' Ricavo dati lama corrente
-         Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
-         ' Imposto la lama corrente
-         If Not EgtSetCalcTool(sSaw, "H1", 1) Then Return
+         ' Reimposto eventuale precedente utensile
+         EgtSetCalcTool(sTool, sHead, nExit)
       End If
 
       ' Se il secondo punto non coincide con il primo, disegno il taglio
@@ -559,9 +579,13 @@ Public Class SingleCutUC
       Dim dRawHeight As Double = m_ptRawMax.z - m_ptRawMin.z
       ' Recupero spessore lama corrente
       Dim sSaw As String = m_MainWindow.m_CurrentMachine.sCurrSaw
+      Dim sSawing As String = m_MainWindow.m_CurrentMachine.sCurrSawing
       EgtTdbSetCurrTool(sSaw)
       Dim dThick As Double = 0
-      EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      ' se è impostata una lavorazione di lama
+      If Not String.IsNullOrEmpty(sSawing) Then
+         EgtTdbGetCurrToolParam(MCH_TP.THICK, dThick)
+      End If
       ' Rimuovo eventuale vecchio pezzo per taglio diretto
       EraseDirectCutPart()
       ' Disattivo eventuali lavorazioni presenti

DrawImport/SideAngleUc.xaml.vb

@@ -755,6 +755,10 @@ Public Class SideAngleUC
             vJoint.Add(False)
          End If
       Next
+
+      ' se non riesco a generare un elenco allora esco
+      If vJoint.Count < 1 Then Return
+
       If vJoint(0) And vJoint(vJoint.Count - 1) Then
          bJointStart = True
       End If

Machine/AlarmsPageUC.xaml.vb

@@ -437,10 +437,24 @@ Public Class AlarmsPageUC
       End If
       If m_CurrentMachine.sCurrWaterJetting <> String.Empty Then
          CurrWaterJettingTxBx.Text = m_CurrentMachine.sCurrWaterJetting
-         CurrWaterJettingQualityTxBx.Text = m_CurrentMachine.sCurrWaterJettingQuality
          CurrWaterJettingTxBl.Visibility = Windows.Visibility.Visible
          CurrWaterJettingTxBx.Visibility = Windows.Visibility.Visible
-         CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Visible
+         If m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+            CurrWaterJettingTxBx.SetValue(Grid.ColumnSpanProperty, 1)
+            CurrWaterJettingTxBx.SetValue(MarginProperty, New Thickness(CurrWaterJettingTxBx.Margin.Left,
+                                                                        CurrWaterJettingTxBx.Margin.Top,
+                                                                        5,
+                                                                        CurrWaterJettingTxBx.Margin.Bottom))
+            CurrWaterJettingQualityTxBx.Text = m_CurrentMachine.sCurrWaterJettingQuality
+            CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Visible
+         Else
+            CurrWaterJettingTxBx.SetValue(Grid.ColumnSpanProperty, 2)
+            CurrWaterJettingTxBx.SetValue(MarginProperty, New Thickness(CurrWaterJettingTxBx.Margin.Left,
+                                                                        CurrWaterJettingTxBx.Margin.Top,
+                                                                        10,
+                                                                        CurrWaterJettingTxBx.Margin.Bottom))
+            CurrWaterJettingQualityTxBx.Visibility = Windows.Visibility.Collapsed
+         End If
       Else
          CurrWaterJettingTxBl.Visibility = Windows.Visibility.Hidden
          CurrWaterJettingTxBx.Visibility = Windows.Visibility.Hidden

Machine/CurrentMachine.vb

@@ -77,6 +77,9 @@ Public Class CurrentMachine
    Private m_bPolishingWheel As Boolean = False
    Private m_bWaterJet As Boolean = False
 
+   ' Abilitazione DB WaterJet
+   Private m_bFromDBWaterJet As Boolean = False
+
    ' Flag per visualizzazione TcPos, Testa/uscita e Note utente
    Private m_nShowToolChanger As Integer = 0                 ' 0=no, 1=tutti utensili, 2=solo lame
    Private m_bShowHeadExit As Boolean = False
@@ -436,6 +439,12 @@ Public Class CurrentMachine
       End Get
    End Property
 
+   Friend ReadOnly Property bFromDBWaterJet As Boolean
+      Get
+         Return m_bFromDBWaterJet
+      End Get
+   End Property
+
    Friend ReadOnly Property ShowToolChanger As Integer
       Get
          Return m_nShowToolChanger
@@ -1006,7 +1015,7 @@ Public Class CurrentMachine
       End Get
       Set(value As Material)
          Dim CurrMatId As String = If(Not IsNothing(value), value.nId.ToString, "")
-         If bWaterJet Then
+         If bWaterJet And bFromDBWaterJet Then
             WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId & If(Not IsNothing(value), "." & value.SubId, ""), sMachIniFile)
          Else
             WritePrivateProfileString(S_MATERIALS, K_CURRMATERIAL, CurrMatId, sMachIniFile)
@@ -1108,6 +1117,8 @@ Public Class CurrentMachine
       ' waterjet
       m_bWaterJet = (GetPrivateProfileInt(S_TOOLS, K_WATERJET, 0, sMachIniFile) > 0) And
                     m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.ENABLE_WJ)
+      ' Leggo abilitazione DB WaterJet
+      m_bFromDBWaterJet = (GetPrivateProfileInt(S_MATERIALS, K_FROMDBWATERJET, 0, sMachIniFile) > 0)
       ' Leggo abilitazione visualizzazione TcPos, Head/exit e Note utente
       m_nShowToolChanger = GetPrivateProfileInt(S_TOOLS, K_SHOWTOOLCHANGER, 0, sMachIniFile)
       m_bShowHeadExit = (GetPrivateProfileInt(S_TOOLS, K_SHOWHEADEXIT, 0, sMachIniFile) > 0)
@@ -1247,7 +1258,7 @@ Public Class CurrentMachine
       Dim Material As Material = Nothing
       Dim nIndex As Integer = 1
 
-      If m_bWaterJet Then
+      If m_bWaterJet And m_bFromDBWaterJet Then
          LoadWJMaterial(True)
       Else
          While (GetPrivateProfileMaterial(S_MATERIALS, K_MATERIAL & nIndex, Material, sMachIniFile))
@@ -1262,7 +1273,7 @@ Public Class CurrentMachine
       ' Leggo materiale correntemente attivo
       Dim sCurrMatId As String = String.Empty
       EgtUILib.GetPrivateProfileString(S_MATERIALS, K_CURRMATERIAL, "0", sCurrMatId, sMachIniFile)
-      If bWaterJet Then
+      If bWaterJet And bFromDBWaterJet Then
          Dim sCurrMatIds As String()
          sCurrMatIds = sCurrMatId.Split("."c)
          If sCurrMatIds.Length > 1 Then
@@ -1303,7 +1314,6 @@ Public Class CurrentMachine
       Local_MaterialList = EgtWPFLib5.WaterjetDbWindowVM.LoadWjMaterials(sFilePath)
       ' definisco la lista delle qualità (solo se è vuota)
       If m_Qualities.Count < 1 Then
-         m_Qualities.Add("")
          m_Qualities.Add("Q1")
          m_Qualities.Add("Q2")
          m_Qualities.Add("Q3")

Machine/MachinePageUC.xaml.vb

@@ -64,7 +64,7 @@ Public Class MachinePageUC
          PolishingsBtn.IsEnabled = False
       End If
 
-      If Not m_MainWindow.m_CurrentMachine.bWaterJet Then
+      If Not m_MainWindow.m_CurrentMachine.bWaterJet Or Not m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
          WaterJetBtn.IsEnabled = False
       End If
 

Machine/MachiningDbPageUC.xaml.vb

@@ -552,12 +552,15 @@ Public Class MachiningDbPageUC
       HeadSideCmBx.SelectedIndex = ToolInt - 1
       EgtMdbGetCurrMachiningParam(MCH_MP.LEADINTYPE, ToolInt)
       If LeadInTypeCmBx.Items.Count > 0 Then
-         LeadInTypeCmBx.SelectedItem =  LeadInTypeCmBx.Items(0)
+         LeadInTypeCmBx.SelectedItem = LeadInTypeCmBx.Items(0)
       Else
          LeadInTypeCmBx.SelectedItem = Nothing
       End If
       For Each LInType As IdNameStruct In LeadInTypeCmBx.Items
-         If ToolInt = LInType.Id Then LeadInTypeCmBx.SelectedItem = LInType
+         If ToolInt = LInType.Id Then
+            LeadInTypeCmBx.SelectedItem = LInType
+            Exit For
+         End If
       Next
       EgtMdbGetCurrMachiningParam(MCH_MP.EXTLINKTYPE, ToolInt)
       ExtLinkTypeCmBx.SelectedIndex = ToolInt
@@ -705,7 +708,7 @@ Public Class MachiningDbPageUC
       ' Lista materiali
       m_MaterialsList.Clear()
       For Each Material As Material In m_MainWindow.m_CurrentMachine.Materials
-         If m_MainWindow.m_CurrentMachine.bWaterJet Then
+         If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
             m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName, Material.SubId))
          Else
             m_MaterialsList.Add(New MachiningMaterial(Material.nId, Material.sName))
@@ -720,7 +723,7 @@ Public Class MachiningDbPageUC
             Dim SubParam() As String = Param(0).Split(".".ToCharArray)
             Dim nParId As Integer = 0
             Dim nSubParId As Integer = 0
-            If m_MainWindow.m_CurrentMachine.bWaterJet Then
+            If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
                If StringToInt(SubParam(0), nParId) AndAlso nParId = Material.nId AndAlso SubParam.Count > 1 AndAlso
                   StringToInt(SubParam(1), nSubParId) AndAlso nSubParId = Material.nSubId Then
 
@@ -819,13 +822,13 @@ Public Class MachiningDbPageUC
       ' Parmetri nascosti di svuotatura
       If nMachiningType = MCH_MY.POCKETING Then
          EgtMdbSetCurrMachiningParam(MCH_MP.SUBTYPE, MCH_POCK_SUB.SPIRALOUT)
-         EgtMdbSetCurrMachiningParam( MCH_MP.LEADINTYPE, MCH_POCK_LI.HELIX)
+         ' EgtMdbSetCurrMachiningParam( MCH_MP.LEADINTYPE, MCH_POCK_LI.HELIX)
          Dim dToolDiam As Double = 100
          If Not IsNothing(ToolCmBx.SelectedItem) Then
             EgtTdbSetCurrTool( ToolCmBx.SelectedItem.ToString())
             EgtTdbGetCurrToolParam( MCH_TP.DIAM, dToolDiam)
          End If
-         EgtMdbSetCurrMachiningParam( MCH_MP.LITANG, 0.495 * dToolDiam)
+         EgtMdbSetCurrMachiningParam(MCH_MP.LITANG, 0.99 * dToolDiam)
          EgtMdbSetCurrMachiningParam( MCH_MP.LIELEV, 2.0)
       End If
       ' Parametri WaterJetting
@@ -894,7 +897,7 @@ Public Class MachiningDbPageUC
       ' Scrivo stringa materiali da lista
       Dim sMaterialString As String = String.Empty
       For Each Material As MachiningMaterial In m_MaterialsList
-         If m_MainWindow.m_CurrentMachine.bWaterJet Then
+         If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
             If Material.bIsActive Then
                sMaterialString += Material.nId.ToString & "." & Material.nSubId.ToString & "," & DoubleToString(Material.dMinThickness, 0) & "," & DoubleToString(Material.dMaxThickness, 0) & ";"
             End If
@@ -1138,30 +1141,26 @@ Public Class MachiningDbPageUC
             ' Definizione della grid TypeGrd con la giusta altezza e numero di righe
             Dim RowNum As Integer = TypeGrd.RowDefinitions.Count
             If RowNum > 2 Then
+               ' elimino eventuali righe in eccesso
                For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
             ElseIf RowNum < 2 Then
                ' costruiso una riga in più da inserire
                Dim Row As New RowDefinition
                TypeGrd.RowDefinitions.Add(Row)
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
             End If
+            LeadInTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 0)
+            LeadInTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
+            LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
+            TypeBrd.SetValue(Grid.RowProperty, 12)
+            TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+
             LeadInTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadInTypeCmBx.Visibility = Windows.Visibility.Visible
             ExtLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
@@ -1779,7 +1778,7 @@ Public Class MachiningDbPageUC
             StepTypeTxBl.Visibility = Windows.Visibility.Hidden
             StepTypeCmBx.Visibility = Windows.Visibility.Hidden
             SideBrd.SetValue(Grid.RowProperty, 9)
-            SideBrd.Visibility = Windows.Visibility.Visible
+            SideBrd.Visibility = Windows.Visibility.Hidden
             WorkSideTxBl.Visibility = Windows.Visibility.Hidden
             WorkSideCmBx.Visibility = Windows.Visibility.Hidden
             HeadSideTxBl.Visibility = Windows.Visibility.Hidden
@@ -1791,15 +1790,22 @@ Public Class MachiningDbPageUC
                For Index As Integer = RowNum - 1 To 2 Step -1
                   TypeGrd.RowDefinitions.RemoveAt(Index)
                Next
-               LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
-               LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
-               LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
-               TypeBrd.SetValue(Grid.RowProperty, 12)
-               TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+            ElseIf RowNum < 2 Then
+               ' costruiso una riga in più da inserire
+               Dim Row As New RowDefinition
+               TypeGrd.RowDefinitions.Add(Row)
             End If
+            LeadInTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadInTypeTxBl.SetValue(Grid.ColumnProperty, 0)
+            LeadInTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadInTypeCmBx.SetValue(Grid.ColumnProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeTxBl.SetValue(Grid.ColumnProperty, 2)
+            LeadOutTypeCmBx.SetValue(Grid.RowProperty, 1)
+            LeadOutTypeCmBx.SetValue(Grid.ColumnProperty, 3)
+            TypeBrd.SetValue(Grid.RowProperty, 12)
+            TypeBrd.SetValue(Grid.RowSpanProperty, 6)
+
             LeadInTypeTxBl.Visibility = Windows.Visibility.Visible
             LeadInTypeCmBx.Visibility = Windows.Visibility.Visible
             ExtLinkTypeTxBl.Visibility = Windows.Visibility.Hidden
@@ -2285,7 +2291,7 @@ Public Class MachiningDbPageUC
    Private Sub MaxThicknessTxBx_EgtClosed(sender As Object, e As EventArgs) Handles MaxThicknessTxBx.EgtClosed
       Dim SelectedMaterial As MachiningMaterial = MaterialsList.SelectedItem
       Dim dMaxThick As Double = 0
-      If m_MainWindow.m_CurrentMachine.bWaterJet Then
+      If m_MainWindow.m_CurrentMachine.bWaterJet And m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
          ' solo per water jet controllo lo spessore massimo ammissibile
          dMaxThick = m_MainWindow.m_CurrentMachine.GetMaxThicknessCurrMaterial(SelectedMaterial.Name)
          Dim dVal As Double
@@ -2369,7 +2375,6 @@ Public Class MachiningDbPageUC
          Case MCH_MY.POCKETING
             LeadInTypeCmBx.ItemsSource = New ObservableCollection(Of IdNameStruct)(
                                           {New IdNameStruct(MCH_POCK_LI.NONE, EgtMsg(MSG_COMBOBOXPARAM + 42)),
-                                           New IdNameStruct(MCH_POCK_LI.GLIDE, EgtMsg(MSG_COMBOBOXPARAM + 48)),
                                            New IdNameStruct(MCH_POCK_LI.ZIGZAG, EgtMsg(MSG_COMBOBOXPARAM + 38)),
                                            New IdNameStruct(MCH_POCK_LI.HELIX, EgtMsg(MSG_COMBOBOXPARAM + 49))})
             LeadOutTypeCmBx.ItemsSource = New ObservableCollection(Of IdNameStruct)(

MainWindow.xaml.vb

@@ -323,8 +323,8 @@ Class MainWindow
       ' Verifico abilitazione nesting automatico
       m_bAutoNest = Not String.IsNullOrWhiteSpace(sNestKey)
       ' Recupero opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2312, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2312, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2401, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2401, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.CUT_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -569,6 +569,8 @@ Class MainWindow
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       ' disbilito Test
       TestOff()
+      ' disabilito DragRettangle
+      DragRettangleOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = True
@@ -625,6 +627,7 @@ Class MainWindow
       EgtMdbGetGeneralParam(MCH_GP.SAFEZ, DirectCutPageUC.m_dZSafe)
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -678,6 +681,7 @@ Class MainWindow
    Private Sub CadCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles CadCutBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -730,6 +734,7 @@ Class MainWindow
    Private Sub FrameCutBtn_Click(sender As Object, e As RoutedEventArgs) Handles FrameCutBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -783,6 +788,7 @@ Class MainWindow
    Private Sub MachineBtn_Click(sender As Object, e As RoutedEventArgs) Handles MachineBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -831,6 +837,7 @@ Class MainWindow
    Private Sub OptionsBtn_Click(sender As Object, e As RoutedEventArgs) Handles OptionsBtn.Click
       m_CurrentProjectPageUC.m_SceneButtons.MeasureBtn.IsChecked = False
       TestOff()
+      DragRettangleOff()
       Select Case m_ActivePage
          Case Pages.WorkInProgress
             WorkInProgressBtn.IsChecked = False
@@ -1140,7 +1147,7 @@ Class MainWindow
       ' Aggiorno interfaccia
       CadCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FRAMES)
       FrameCutBtn.IsEnabled = (nPrjType <> CurrentProjectPageUC.PRJ_TYPE.FLATS) AndAlso (EgtGetHeadId("H1") <> GDB_ID.NULL)
-      DirectCutBtn.IsEnabled = (EgtGetHeadId("H1") <> GDB_ID.NULL)
+      ' DirectCutBtn.IsEnabled = (EgtGetHeadId("H1") <> GDB_ID.NULL)
    End Sub
 
    ' Nomi dei file per OmagVIEW
@@ -1885,8 +1892,17 @@ Class MainWindow
       ' deseleziono gli oggetti e spengo il bottone
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
       EgtDeselectObj(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
+      EgtResetMark(m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       m_CadCutPageUC.m_ProjectMgr.TestBtn.IsChecked = False
-      m_CurrentProjectPageUC.m_bSelectCurv = False
+      Me.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
+   End Sub
+
+   ' spegne il comando per la mofica dei rettangoli
+   Public Sub DragRettangleOff()
+      m_CadCutPageUC.m_NestPage.DragRettanleBtn.IsChecked = False
+      Me.m_CadCutPageUC.m_NestPage.m_bIsCheckedDragRettangle = False
+      ShowParkedParts()
+
    End Sub
 
 End Class

My Project/AssemblyInfo.vb

@@ -62,5 +62,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.1.1")>
-<Assembly: AssemblyFileVersion("2.4.1.1")>
+<Assembly: AssemblyVersion("2.4.1.3")>
+<Assembly: AssemblyFileVersion("2.4.1.3")>

OmagCUT.vbproj

@@ -1238,6 +1238,9 @@
   <ItemGroup>
     <Resource Include="Resources\NewIcons\Acquisisci-P.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\Drag_Rettangle.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagCUT\OmagCUTR32.exe

OmagCUTDarkDictionary.xaml

@@ -105,6 +105,7 @@
     <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
+    <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
     
     <!--Machine-->
     <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>

OmagCUTDictionary.xaml

@@ -173,6 +173,7 @@
     <BitmapImage x:Key="Elimina-pezzoImg" UriSource="Resources/NewIcons/Elimina-pezzo.png"></BitmapImage>
     <BitmapImage x:Key="Seleziona-tuttoImg" UriSource="Resources/NewIcons/Seleziona-tutto.png"></BitmapImage>
     <BitmapImage x:Key="Deseleziona-tuttoImg" UriSource="Resources/NewIcons/Deseleziona-tutto.png"></BitmapImage>
+    <BitmapImage x:Key="Drag_RettangleImg" UriSource="Resources/NewIcons/Drag_Rettangle.png"></BitmapImage>
 
     <!--Machine-->
     <BitmapImage x:Key="DatiMacchinaImg" UriSource="Resources/NewIcons/DatiMacchina.png"></BitmapImage>

Project/CicloStartWD.xaml.vb

@@ -18,7 +18,7 @@ Class CicloStartWD
       Me.Top = Owner.Top + Owner.Height / 2 - Me.Height / 2
       Me.Left = Owner.Left + Owner.Width / 2 - Me.Width / 2
       ' imopposto il messaggio di avvio
-      CicloStartTxbl.Text = "Avvio Ciclo-Start"
+      CicloStartTxbl.Text = EgtMsg(91130)   ' Esegui programma?
    End Sub
 
    ' creo un progetto nuovo

Project/CurrentProjectPageUC.xaml.vb

@@ -6,7 +6,6 @@ Imports EgtWPFLib5
 
 Public Class CurrentProjectPageUC
    ' Dichiarazione eventi
-   Friend Event OnMouseDownSceneSelCurv(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
    Friend Event OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
@@ -24,8 +23,8 @@ Public Class CurrentProjectPageUC
    ' Dati del grezzo
    Friend m_nRawId As Integer = GDB_ID.NULL
    Friend m_dRawHeight As Double
-   ' pagina impostata per selezionare una lavorazione
-   Friend m_bSelectCurv As Boolean = False
+   '' Flag per impostata per selezionare di una curva
+   'Friend m_bSelectCurv As Boolean = False
    ' Costanti tipo progetto
    Friend Enum PRJ_TYPE As Integer
       EMPTY = 0
@@ -328,12 +327,7 @@ Public Class CurrentProjectPageUC
    End Sub
 
    Private Sub OnMyMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.OnMouseDownScene
-      If m_bSelectCurv Then
-         RaiseEvent OnMouseDownSceneSelCurv(sender, e)
-      Else
-         RaiseEvent OnMouseDownScene(sender, e)
-      End If
-
+      RaiseEvent OnMouseDownScene(sender, e)
    End Sub
 
    Private Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs) Handles CurrentProjectScene.OnMouseMoveScene

Project/ProjectMgrUC.xaml.vb

@@ -276,7 +276,7 @@ Public Class ProjectMgrUC
       m_CurrProjPage.SetWarningMessage("Trial Version")
 #Else
       ' se sono in modalità Test allora eseguo solo il posizionamento della lama
-      If m_CurrProjPage.m_bSelectCurv Then
+      If m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv Then
          ' Verifico non sia versione Ufficio
          If m_MainWindow.GetKeyOption(MainWindow.KEY_OPT.OFFICE_TYPE) Then
             m_CurrProjPage.SetWarningMessage("Office Version")
@@ -336,7 +336,7 @@ Public Class ProjectMgrUC
          ' verifica assi lineari
          EgtVerifyOutstroke(dX, dY, dZ, dC1, dB1, nStat)
          If nStat <> 0 Then
-            vtDirT = - vtDirT
+            vtDirT = -vtDirT
             ptMid -= vtDirT * dThick
             EgtGetCalcAngles(vtDirT, Vector3d.Z_AX(), nStat, dC1, dB1, dC2, dB2)
             ' calcolo la posizione degli assi lineari X, Y, Z ( correggere il punto ptMid.z sommando il raggio utensile)
@@ -736,11 +736,11 @@ Public Class ProjectMgrUC
 
    Private Sub TestBtn_Click(sender As Object, e As RoutedEventArgs) Handles TestBtn.Click
       If TestBtn.IsChecked Then
-         m_CurrProjPage.m_bSelectCurv = True
+         m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = True
          ' deseleziono tutto
          EgtDeselectAll()
       Else
-         m_CurrProjPage.m_bSelectCurv = False
+         m_MainWindow.m_CadCutPageUC.m_NestPage.m_bSelectCurv = False
          EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedCurv)
          EgtDeselectObj(m_MainWindow.m_CadCutPageUC.m_NestPage.m_CurrSelectedSawCurv)
       End If

RawPhoto/ChooseMachining.xaml.vb

@@ -263,7 +263,7 @@ Public Class ChooseMachining
          If SysNotes <> String.Empty Then
             Dim MachiningMaterials() = SysNotes.Split(";".ToCharArray)
             SysNotes = String.Empty
-            If m_CurrentMachine.bWaterJet Then
+            If m_CurrentMachine.bWaterJet And m_CurrentMachine.bFromDBWaterJet Then
                For Each Material As Object In MachiningMaterials
                   Dim Param() As String = Material.Split(",".ToCharArray)
                   Dim SubParam() As String = Param(0).Split(".".ToCharArray)
@@ -589,18 +589,24 @@ Public Class ChooseMachining
             ' verifico che sia stato inserito veramente una lavorazione prima di comunicare una modifica
             If CurrMillingCmBx.SelectedItem <> m_CurrentMachine.sCurrWaterJetting Then m_MachIsModified = True
          End If
-         If String.IsNullOrEmpty(CurrWJettingQualityCmBx.SelectedItem) Then
-            CurrWJettingQualityCmBx.SelectedItem = m_CurrentMachine.sCurrWaterJettingQuality
-         End If
-         ' verifico che la selezione sia andata a buon fine, altrimenti comunico l'avvenuta modifica
-         If String.IsNullOrEmpty(CurrWJettingQualityCmBx.SelectedItem) Then
-            ' verifico che sia stato inserito veramente una lavorazione prima di comunicare una modifica
-            If CurrWJettingQualityCmBx.SelectedItem <> m_CurrentMachine.sCurrWaterJettingQuality Then m_MachIsModified = True
-         End If
-
-         CurrWJettingQualityCmBx.Visibility = Windows.Visibility.Visible
          CurrWJettingTxBl.Visibility = Windows.Visibility.Visible
          CurrWJettingCmBx.Visibility = Windows.Visibility.Visible
+         ' se DB WaterJet abilitato avrò anche la CmBx della Quality altrimenti espando la CmBx del Waterjetting corrente su tutta la riga
+         If m_MainWindow.m_CurrentMachine.bFromDBWaterJet Then
+            CurrWJettingCmBx.SetValue(Grid.ColumnSpanProperty, 1)
+            If String.IsNullOrEmpty(CurrWJettingQualityCmBx.SelectedItem) Then
+               CurrWJettingQualityCmBx.SelectedItem = m_CurrentMachine.sCurrWaterJettingQuality
+            End If
+            ' verifico che la selezione sia andata a buon fine, altrimenti comunico l'avvenuta modifica
+            If String.IsNullOrEmpty(CurrWJettingQualityCmBx.SelectedItem) Then
+               ' verifico che sia stato inserito veramente una lavorazione prima di comunicare una modifica
+               If CurrWJettingQualityCmBx.SelectedItem <> m_CurrentMachine.sCurrWaterJettingQuality Then m_MachIsModified = True
+            End If
+            CurrWJettingQualityCmBx.Visibility = Windows.Visibility.Visible
+         Else
+            CurrWJettingCmBx.SetValue(Grid.ColumnSpanProperty, 3)
+            CurrWJettingQualityCmBx.Visibility = Windows.Visibility.Collapsed
+         End If
       End If
 
       Me.Height = 42 * m_RowNumber
@@ -633,10 +639,14 @@ Public Class ChooseMachining
 
    Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
       DialogResult = True
+      ' Aggiorno i parametri dei tagli diretti
+      m_MainWindow.m_DirectCutPageUC.ReloadParam()
    End Sub
 
    Private Sub ExitBtn_Click(sender As Object, e As RoutedEventArgs) Handles ExitBtn.Click
       DialogResult = False
+      ' Aggiorno i parametri dei tagli diretti
+      m_MainWindow.m_DirectCutPageUC.ReloadParam()
    End Sub
 
 End Class

RawPhoto/RawPartPageUC.xaml.vb

@@ -167,7 +167,7 @@ Public Class RawPartPageUC
    Private Sub RawPartPage_Loaded(sender As Object, e As RoutedEventArgs)
       ' aggiorno la lista dei materiali
       Dim Index As Integer = 1
-      If m_CurrentMachine.bWaterJet Then
+      If m_CurrentMachine.bWaterJet And m_CurrentMachine.bFromDBWaterJet Then
          m_CurrentMachine.LoadWJMaterial()
       End If