Include :

- aggiunto nome Entità CL speciali per drilling in doppio.

EExBeamConst.h

@@ -1,13 +1,14 @@
 //----------------------------------------------------------------------------
-//  EgalTech 2020-2022
+//  EgalTech 2020-2026
 //----------------------------------------------------------------------------
-// File : EExBeamConst.h          Data : 04.04.22          Versione : 2.4d2
+// File : EExBeamConst.h          Data : 23.01.26          Versione : 3.1a2
 // Contenuto : Dichiarazione delle costanti per travi e pareti con BTL.
 //
 //
 //
 // Modifiche : 30.08.20 DS Creazione modulo.
 //             04.04.22 DS Aggiunto EIBFLAG_TRIM_WITH_OUTLINE.
+//             23.01.26 DS Aggiunto EIBFLAG_PARTOFFSET.
 //
 //----------------------------------------------------------------------------
 
@@ -22,4 +23,5 @@ enum EImBtlFlag { EIBFLAG_NONE =              0x0000,
                   EIBFLAG_SORT =              0x0010,         // ordina i pezzi nel DB in base al nome
                   EIBFLAG_USEUATTR =          0x0020,         // utilizza i parametri utente U per modificare la geometria delle features
                   EIBFLAG_OUTL_FLAT_POS =     0x0040,         // pezzi secondo outline o di piatto (prevale sui precedenti POS)
-                  EIBFLAG_TRIM_WITH_OUTLINE = 0x0080} ;       // esegui il trim delle feature con l'outline (se presente)
+                  EIBFLAG_TRIM_WITH_OUTLINE = 0x0080,         // esegui il trim delle feature con l'outline (se presente)
+                  EIBFLAG_PARTOFFSET =        0x0100} ;       // gestione geometrica del PARTOFFSET

EGkCDeClosedSurfTmClosedSurfTm.h

@@ -33,5 +33,6 @@ EGK_EXPORT bool CDeClosedSurfTmClosedSurfTm( const ISurfTriMesh& SurfA, const IS
 
 //----------------------------------------------------------------------------
 // Verifica l'interferenza tra le due superfici : restituisce true in caso di interferenza.
+// Se richiesta verifica inclusione se una delle due è chiusa controlla l'inclusione dell'altra. 
 //----------------------------------------------------------------------------
-EGK_EXPORT bool TestSurfTmSurfTm( const ISurfTriMesh& SurfA, const ISurfTriMesh& SurfB, double dSafeDist) ;
+EGK_EXPORT bool TestSurfTmSurfTm( const ISurfTriMesh& SurfA, const ISurfTriMesh& SurfB, double dSafeDist, bool bTestEnclosion = false) ;

EGkCurveAux.h

@@ -78,7 +78,7 @@ EGK_EXPORT ICurveBezier* ApproxArcCurveBezierWithSingleCubic( const ICurve* pCrv
 
 //----------------------------------------------------------------------------
 //! Campiona una serie di punti dalla curva e li approssima con una o più curve di bezier
-EGK_EXPORT ICurve* ApproxCurveWithBezier( const ICurve*, double dTol, int nType) ;
+EGK_EXPORT ICurve* ApproxCurveWithBezier( const ICurve* pCrv, double dTol) ;
 
 //----------------------------------------------------------------------------
 //! Interpola un set di punti e li approssima con una o più curve di bezier cubiche
@@ -167,4 +167,7 @@ EGK_EXPORT bool CalcFatOffsetCurves( const ICURVEPVECTOR& vpCrvs, ICURVEPOVECTOR
 
 //----------------------------------------------------------------------------
 //! Resetta l'oggetto voronoi associato alla curva liberandone la memoria
-EGK_EXPORT void ResetCurveVoronoi( const ICurve& crvC) ;
+EGK_EXPORT void ResetCurveVoronoi( const ICurve& crvC) ;
+
+//! fa il join delle curve passate in input
+EGK_EXPORT bool GetChainedCurves( ICRVCOMPOPOVECTOR& vCrv, double dChainTol = 5 * EPS_SMALL, bool bAllowInvert = false) ;

EGkCurveComposite.h

@@ -93,10 +93,16 @@ inline ICurveComposite* ConvertCurveToComposite( IGeoObj* pGObj)
                     delete pGObj ;
                     return nullptr ;
                  }
-                 ICurveComposite* pCrvCo = CreateCurveComposite() ;
-                 if ( pCrvCo == nullptr) {
-                    delete pGObj ;
-                    return nullptr ;
+                 ICurveComposite* pCrvCo = GetCurveComposite( pGObj) ;
+                 if ( pCrvCo != nullptr) {
+                    return pCrvCo ;
+                 }
+                 else {
+                    pCrvCo = CreateCurveComposite() ;
+                    if ( pCrvCo == nullptr) {
+                       delete pGObj ;
+                       return nullptr ;
+                    }
                  }
                  ICurve* pCrv = static_cast<ICurve*>( pGObj) ;
                  Vector3d vtExtr ;

EGkDistPointSurfBz.h

@@ -47,7 +47,7 @@ class DistPointSurfBz
       EGK_EXPORT bool IsZero( void) const
                        { return IsEpsilon( EPS_ZERO) ; }
       EGK_EXPORT bool GetMinDistPoint( Point3d& ptMinDistPoint) const ;
-      EGK_EXPORT bool GetParamPoint( Point3d& ptParamPoint) const ;
+      EGK_EXPORT bool GetParamsAtMinDistPoint( double& dU, double& dV) const ;
       EGK_EXPORT bool GetNorm( Vector3d& vtN) const ;
       EGK_EXPORT bool IsPointInside( void) const
                         { return ( m_bIsInside  &&  m_bIsSurfClosed) ; }
@@ -58,10 +58,10 @@ class DistPointSurfBz
       void Calculate( const Point3d& ptP, const ISurfBezier& srfBz) ;
 
    private :
-      double  m_dDist ;                   // Minima distanza del punto dalla superficie
-      Point3d m_ptMinDistPoint ;          // Punto sulla superficie a minima distanza
-      Point3d m_ptParam ;                 // punto corrispondente nello spazio parametrico
-      Vector3d m_vtN ;                    // normale alla superficie nel punto a minima distanza
-      bool    m_bIsInside ;               // Flag per punto interno o esterno alla superficie ( se chiusa )
-      bool    m_bIsSurfClosed ;           // Flag per superficie aperta o chiusa
+      double   m_dDist ;                   // Minima distanza del punto dalla superficie
+      Point3d  m_ptMinDistPoint ;          // Punto sulla superficie a minima distanza
+      Point3d  m_ptParam ;                 // punto corrispondente nello spazio parametrico (x->U, y->V)
+      Vector3d m_vtN ;                     // normale alla superficie nel punto a minima distanza
+      bool     m_bIsInside ;               // Flag per punto interno o esterno alla superficie ( se chiusa )
+      bool     m_bIsSurfClosed ;           // Flag per superficie aperta o chiusa
 } ;

EGkGdbConst.h

@@ -34,7 +34,8 @@ enum GdbInsPos { GDB_FIRST_SON = 0,
 //----------------- Costanti tipo salvataggio del DB geometrico ----------------
 enum GdbSave { GDB_SV_TXT =  0,
                GDB_SV_BIN =  1,
-               GDB_SV_CMPTXT = 2} ;
+               GDB_SV_CMPTXT = 2,
+               GDB_SV_CMPBIN = 3} ;
 
 //----------------- Costanti tipo oggetti del DB geometrico --------------------
 enum GdbType { GDB_TY_NONE =  0,

EGkMultiGeomDB.h

@@ -1,12 +1,13 @@
 //----------------------------------------------------------------------------
 //  EgalTech 2025-2025
 //----------------------------------------------------------------------------
-// File : MultiGeomDB.h       Data : 08.10.25          Versione : 2.7j1
+// File : MultiGeomDB.h       Data : 22.12.25          Versione : 2.7l3
 // Contenuto : Dichiarazione delle funzioni tra due GeomDB.
 //
 //
 //
 // Modifiche : 08.10.25 DB Creazione modulo.
+//             22.12.25 DS Aggiunta funzione DuplicateGeomDB.
 //
 //
 //----------------------------------------------------------------------------
@@ -24,5 +25,6 @@
 #endif
 
 //----------------------------------------------------------------------------
-EGK_EXPORT int Copy( IGeomDB* pSouGeomDB, int nSouId, IGeomDB* pDestGeomDB, int nDestId, int nRefId, int nSonBeforeAfter = GDB_LAST_SON) ;
-EGK_EXPORT int CopyGlob( IGeomDB* pSouGeomDB, int nSouId, IGeomDB* pDestGeomDB, int nDestId, int nRefId, int nSonBeforeAfter = GDB_LAST_SON) ;
+EGK_EXPORT int  Copy( IGeomDB* pSouGeomDB, int nSouId, IGeomDB* pDestGeomDB, int nDestId, int nRefId, int nSonBeforeAfter = GDB_LAST_SON) ;
+EGK_EXPORT int  CopyGlob( IGeomDB* pSouGeomDB, int nSouId, IGeomDB* pDestGeomDB, int nDestId, int nRefId, int nSonBeforeAfter = GDB_LAST_SON) ;
+EGK_EXPORT bool DuplicateGeomDB( IGeomDB* pSouGeomDB, IGeomDB* pDestGeomDB, bool bSkipTemp = false) ;

EGkPolyLine.h

@@ -108,7 +108,7 @@ class PolyLine
       EGK_EXPORT bool GetMaxDistanceFromLine( const Point3d& ptLine, const Vector3d& vtLine, double dLen,
                                               double& dMaxDist,  bool bIsSegment = true) const ;
       EGK_EXPORT bool AdjustForMaxSegmentLen( double dMaxLen) ;
-      EGK_EXPORT bool RemoveAlignedPoints( double dToler = EPS_SMALL) ;
+      EGK_EXPORT bool RemoveAlignedPoints( double dToler = EPS_SMALL, bool bStartEnd = true) ;
       EGK_EXPORT bool ApproxOnSide( const Vector3d& vtN, bool bLeftSide, double dToler = EPS_SMALL) ;
       EGK_EXPORT bool MakeConvex( const Vector3d& vtN,  bool bLeftSide) ;
       EGK_EXPORT bool Invert( bool bInvertU = true) ;

EGkProjectCurveSurf.h

@@ -31,13 +31,18 @@ struct Point5ax {
    Point3d  ptP ;
    Vector3d vtDir1 ;
    Vector3d vtDir2 ;
+   Vector3d vtDirU ;
+   Vector3d vtDirV ;
    double   dPar ;
    int      nFlag ;
-   Point5ax( void) : ptP(), vtDir1(), vtDir2(), dPar(), nFlag() {} ;
+   Point5ax( void) : ptP(), vtDir1(), vtDir2(), vtDirU(), vtDirV(), dPar(), nFlag() {} ;
    Point5ax( const Point3d& ptBase, const Vector3d& vtTool, double dU, int nData)
-      : ptP( ptBase), vtDir1( vtTool), vtDir2(), dPar( dU), nFlag( nData) {} ;
+      : ptP( ptBase), vtDir1( vtTool), vtDir2(), vtDirU(), vtDirV(), dPar( dU), nFlag( nData) {} ;
    Point5ax( const Point3d& ptBase, const Vector3d& vtTool, const Vector3d& vtTool2, double dU, int nData)
-      : ptP( ptBase), vtDir1( vtTool), vtDir2( vtTool2), dPar( dU), nFlag( nData) {} ;
+      : ptP( ptBase), vtDir1( vtTool), vtDir2( vtTool2), vtDirU(), vtDirV(), dPar( dU), nFlag( nData) {} ;
+   Point5ax( const Point3d& ptBase, const Vector3d& vtTool, const Vector3d& vtTool2,
+             const Vector3d& vtDU, const Vector3d& vtDV, double dU, int nData)
+      : ptP( ptBase), vtDir1( vtTool), vtDir2( vtTool2), vtDirU( vtDU), vtDirV( vtDV), dPar( dU), nFlag( nData) {} ;
 } ; 
 typedef std::vector<Point5ax>        PNT5AXVECTOR ;    // vettore di Punti 5assi
 

EGkSbzFromCurves.h

@@ -44,7 +44,7 @@ EGK_EXPORT ISurfBezier* GetSurfBezierByScrewing( const ICurve* pCurve, const Poi
 //EGK_EXPORT ISurfBezier* GetSurfBezierTransSwept( const ICurve* pSect, const ICurve* pGuide, bool bCapEnds, double dLinTol = 10 * EPS_SMALL) ;
 EGK_EXPORT ISurfBezier* GetSurfBezierRuled( const Point3d& ptP, const ICurve* pCurve, double dLinTol = 10 * EPS_SMALL) ;
 EGK_EXPORT ISurfBezier* GetSurfBezierRuled( const ICurve* pCurve1, const ICurve* pCurve2, int nType, double dLinTol = 10 * EPS_SMALL) ;
-EGK_EXPORT ISurfBezier* GetSurfBezierRuledGuided( const ICurve* pCurve1, const ICurve* pCurve2, const ICURVEPOVECTOR& vCrv, double dLinTol = 10 * EPS_SMALL) ;
+EGK_EXPORT ISurfBezier* GetSurfBezierRuledGuided( const ICurve* pCurve1, const ICurve* pCurve2, const BIPNTVECTOR& vCrv, double dLinTol = 10 * EPS_SMALL) ;
 EGK_EXPORT ISurfBezier* GetSurfBezierSkinned( const CICURVEPVECTOR& vCrv, double dLinTol = 10 * EPS_SMALL) ;
 EGK_EXPORT ISurfBezier* GetSurfBezierSweptInPlane( const ICurve* pSect, const ICurve* pGuide, const Vector3d& vtNorm, bool bCapEnds, double dLinTol = 10 * EPS_SMALL) ;
 EGK_EXPORT ISurfBezier* GetSurfBezierSwept3d( const ICurve* pSect, const ICurve* pGuide, const Vector3d& vtNorm, bool bCapEnds, double dLinTol = 10 * EPS_SMALL) ;

EGkSurfBezier.h

@@ -74,13 +74,13 @@ class __declspec( novtable) ISurfBezier : public ISurf
                                     Vector3d* pvtDerUU = nullptr, Vector3d* pvtDerVV = nullptr, Vector3d* pvtDerUV = nullptr) const = 0 ;
       virtual ICurveComposite* GetCurveOnU( double dV) const = 0 ;
       virtual ICurveComposite* GetCurveOnV( double dU) const = 0 ;
-      virtual ICurveComposite* GetLoop( int nLoop) const = 0 ;                               // nLoop 0-based (1°esterno, successivi interni) 
+      virtual ICurveComposite* GetLoop( int nLoop) const = 0 ;                               // nLoop 0-based (1°esterno, successivi interni) 
       virtual bool GetControlCurveOnU( int nIndV, PolyLine& plCtrlU) const = 0 ;
       virtual bool GetControlCurveOnV( int nIndU, PolyLine& plCtrlV) const = 0 ;
       virtual const ISurfTriMesh* GetAuxSurf( void) const = 0 ;
       virtual const ISurfTriMesh* GetAuxSurfRefined( void) const = 0 ;
-      virtual ISurfTriMesh* GetApproxSurf( double dTol, double dSideMin = 100 * EPS_SMALL, bool bUpdateEdges = false) const = 0 ;
-      virtual bool GetLeaves ( std::vector<std::tuple<int, Point3d, Point3d>>& vLeaves) const = 0 ;
+      virtual ISurfTriMesh* GetApproxSurf( double dTol, double dSideMin = 10 * EPS_SMALL, bool bUpdateEdges = false) const = 0 ;
+      virtual bool GetLeaves( std::vector<std::tuple<int, Point3d, Point3d>>& vLeaves, bool bRefined = false) const = 0 ;
       virtual bool GetTriangles2D( std::vector<std::tuple<int,Point3d, Point3d, Point3d>>& vTria2D) const = 0 ;
       virtual bool UnprojectPointFromStm( int nT, const Point3d& ptI, Point3d& ptSP, int nIL = 5) const = 0 ;
       virtual bool UnprojectPointFromStm( int nT, const Point3d& ptI, Point3d& ptSP, int nIL, const Point3d& ptIPrev, bool* bTroughEdge = nullptr) const = 0 ;
@@ -96,7 +96,7 @@ class __declspec( novtable) ISurfBezier : public ISurf
       virtual bool IsPlanar( void) const = 0 ;
       virtual bool CreateByFlatContour( const PolyLine& PL) = 0 ;
       virtual bool CreateByRegion( const POLYLINEVECTOR& vPL) = 0 ;
-      virtual bool CreateByExtrusion( const ICurve* pCrv, const Vector3d& vtExtr, bool bDeg3OrDeg2 = false) = 0 ;
+      virtual bool CreateByExtrusion( const ICurve* pCrv, const Vector3d& vtExtr) = 0 ;
       virtual bool CreateByScrewing( const ICurve* pCurve, const Point3d& ptAx, const Vector3d& vtAx, double dAngRotDeg, double dMove) = 0 ;
       virtual bool CreateByPointCurve( const Point3d& pt, const ICurve* pCurve) = 0 ;
       virtual bool CreateByTwoCurves( const ICurve* pCurve1, const ICurve* pCurve2, int nType) = 0 ;

EGkSurfBzRuledFromStmFaces.h

@@ -0,0 +1,37 @@
+//----------------------------------------------------------------------------
+//  EgalTech 2025-2025
+//----------------------------------------------------------------------------
+// File : EGkSurfBzRuledFromStmFaces.h      Data : 15.09.25       Versione : 2.7j1
+// Contenuto : Calcolo di una superficie di Bezier Ruled definita da un sottoinsieme
+//             di facce di una superficie TriMesh
+//
+//
+//
+// Modifiche : 15.09.25 RE Creazione modulo.
+//
+//
+//----------------------------------------------------------------------------
+
+#pragma once
+
+#include "EGkSelection.h"
+#include "EGkCurveLine.h"
+#include "/EgtDev/Include/EGkSurfBezier.h"
+#include "/EgtDev/Include/EGkSurfTriMesh.h"
+
+//----------------------- Macro per import/export ----------------------------
+#undef EGK_EXPORT
+#if defined( I_AM_EGK)            // da definirsi solo nella DLL
+   #define EGK_EXPORT __declspec( dllexport)
+#else
+   #define EGK_EXPORT __declspec( dllimport)
+#endif
+
+//-----------------------------------------------------------------------------
+EGK_EXPORT bool GetBezierEdgeCurvesFromSurfs( const CISURFPVECTOR& vSurf, const SELVECTOR& vSurfFace,
+                                     double dLinTol, double dAngTol, const BIPNTVECTOR& vBreakingPts,
+                                     ICRVCOMPOPOVECTOR& vBezierEdges) ;
+EGK_EXPORT bool GetSyncPointsFromBezierCurves( const ICurveComposite* pEdge0, const ICurveComposite* pEdge1,
+                                               ICRVLINEPOVECTOR& vLines) ;
+EGK_EXPORT bool GetAdjStmFacesInTol( const ISurfTriMesh* pStm, const INTVECTOR& vFaceRef, double dAngTol,
+                                     INTVECTOR& vOtherFaces, double dCurvature) ;

EGkTrimming.h

@@ -0,0 +1,58 @@
+//----------------------------------------------------------------------------
+//  EgalTech 2025-2025
+//----------------------------------------------------------------------------
+// File : EgkTrimming.h      Data : 15.09.25       Versione : 2.7j1
+// Contenuto : Calcolo di una superficie di Bezier Ruled definita da un sottoinsieme
+//             di facce di una superficie TriMesh
+//
+//
+//
+// Modifiche : 15.09.25 RE Creazione modulo.
+//
+//
+//----------------------------------------------------------------------------
+
+#pragma once
+
+#include "EGkSelection.h"
+#include "EGkCurveLine.h"
+#include "/EgtDev/Include/EGkSurfBezier.h"
+#include "/EgtDev/Include/EGkSurfTriMesh.h"
+
+//----------------------- Macro per import/export ----------------------------
+#undef EGK_EXPORT
+#if defined( I_AM_EGK)            // da definirsi solo nella DLL
+   #define EGK_EXPORT __declspec( dllexport)
+#else
+   #define EGK_EXPORT __declspec( dllimport)
+#endif
+
+typedef std::vector<ISURFPOVECTOR> ISURFPOMATRIX ;
+typedef std::vector<ICRVCOMPOPOVECTOR> ICRVCOMPOPOMATRIX ;
+
+//-----------------------------------------------------------------------------
+EGK_EXPORT bool GetTrimmingStmAdjTria( const ISurfTriMesh* pStm, int nStartTria, const Point3d& ptStartTria,
+                                       double dAngTol, double dSize, double dSizeTol, ISurfTriMesh* pStmAdjTria) ;
+EGK_EXPORT bool GetTrimmingAdjSurfs( const CISURFPVECTOR& vSurf, const CISURFPVECTOR& vOtherSurf, double dLinTol,
+                                     double dAngTol, double dFaceAngTol,
+                                     INTVECTOR& vIndOtherSurf) ;
+EGK_EXPORT bool GetTrimmingRawEdges( const CISURFPVECTOR& vSurf, const SELVECTOR& vSurfFace,
+                                     double dLinTol, double dAngTol,
+                                     ICRVCOMPOPOVECTOR& vBezierEdges) ;
+EGK_EXPORT bool GetTrimmingBezierEdges( ICRVCOMPOPOVECTOR& vCompoRawEdges, double dLinTol, double dAngTol,
+                                        ICRVCOMPOPOVECTOR& vCompoEdges) ;
+EGK_EXPORT bool GetTrimmingFinalBorders( ICRVCOMPOPOVECTOR& vCompoBezierEdges, double dLinTol,
+                                         double dAngTol, BIPNTVECTOR& vBreakingPts, double dThick, double dThickTol) ;
+EGK_EXPORT bool GetTrimmingFinalBorders( CISURFPVECTOR& vpSurf, const SELVECTOR& vSurfFaces, double dSurfLinTol,
+                                         double dSurfAngTol, double dLinTol, double dAngTol, double dThick,
+                                         ICRVCOMPOPOVECTOR& vCompoBezierEdges) ;
+EGK_EXPORT ISurfBezier* GetTrimmingRuledBezier( const CISURFPVECTOR& vSurf, const ICurve* pCrvEdge1, const ICurve* pCrvEdge2,
+                                                double dLinTol, const BIPNTVECTOR& vSyncPoints) ;
+EGK_EXPORT bool GetTrimmingSurfBzSyncPoints( const ICurve* pCrvEdge1, const ICurve* pCrvEdge2,
+                                             double dLinTol, BIPNTVECTOR& vSyncPoints) ;
+EGK_EXPORT bool GetTrimmingSyncInterpolation( const ICurve* pCrvEdge1, const ICurve* pCrvEdge2,
+                                              const ICurve* pSync1, const ICurve* pSync2, double dLinTol,
+                                              double dAngTol, BIPNTVECTOR& vSyncPoints) ;
+EGK_EXPORT bool GetTrimmingHoleBorders( const CISURFPVECTOR& vpSurf, const Point3d& ptRef, double dSurfLinTol,
+                                        double dSurfAngTol, double dEdgeLinTol, double dEdgeAngTol,
+                                        double dEdgeThick, ICRVCOMPOPOVECTOR& vHoleBorders) ;

EGnFileUtils.h

@@ -1,13 +1,14 @@
 //----------------------------------------------------------------------------
-//  EgalTech 2013-2022
+//  EgalTech 2013-2026
 //----------------------------------------------------------------------------
-// File : EGnFileUtils.h       Data : 09.04.22          Versione : 2.4d1
+// File : EGnFileUtils.h       Data : 09.01.26          Versione : 3.1a1
 // Contenuto : Prototipi funzioni di utilità su file e direttori.
 //
 //
 //
 // Modifiche : 11.12.13 DS Creazione modulo.
 //             09.04.22 DS Aggiunta FindAllFiles.
+//             09.01.26 DS Aggiunta EraseNonEmptyDirectory.
 //
 //----------------------------------------------------------------------------
 
@@ -42,4 +43,5 @@ EGN_EXPORT bool ExistsDirectory( const std::string& sDir) ;
 EGN_EXPORT bool CreateDirectoryEgt( const std::string& sDir) ;
 EGN_EXPORT bool EmptyDirectory( const std::string& sDir) ;
 EGN_EXPORT bool EraseDirectory( const std::string& sDir) ;
+EGN_EXPORT bool EraseNonEmptyDirectory( const std::string& sDir) ;
 EGN_EXPORT bool FindAllDirectories( const std::string& sDirSpec, STRVECTOR& vsDirNames) ;

EGnStringUtils.h

@@ -189,7 +189,30 @@ EGN_EXPORT bool FromString( const std::string& sVal, DBLVECTOR& vdVal) ;
 EGN_EXPORT bool FromString( const std::string& sVal, STRVECTOR& vsVal) ;
 
 //----------------------------------------------------------------------------
-EGN_EXPORT const std::string ToStringAdv( int nVal, int nPrec = 1, int nRadix = 10, int* pnErr = nullptr) ;
+inline const std::string
+ToStringAdv( int nVal, int nPrec = 1, int nRadix = 10, int* pnErr = nullptr)
+      {
+        // eseguo conversione
+         const int nBuffSize = 36 ;
+         char szBuff[nBuffSize]{} ;
+         auto Res = std::to_chars( szBuff, szBuff + nBuffSize - 1, nVal, nRadix) ;
+         if ( Res.ec != std::errc()) {
+            if ( pnErr != nullptr)
+               *pnErr = int( Res.ec) ;
+            return "#Error" ;
+         }
+         // gestione codice di errore
+         if ( pnErr != nullptr)
+            *pnErr = 0 ;
+         // verifico lunghezza minima
+         int  nLen = (int) strlen( szBuff) ;
+         if ( nLen >= nPrec)
+            return szBuff ;
+         // porto la stringa alla minima lunghezza
+         std::string sBuff( szBuff)  ;
+         sBuff.insert( 0, ( nPrec - nLen), '0') ;
+         return sBuff ;
+      }
 inline const std::string
 ToString( int nVal, int nPrec = 1, int nRadix = 10, int* pnErr = nullptr)
       {
@@ -210,7 +233,31 @@ ToString( int nVal, int nPrec = 1, int nRadix = 10, int* pnErr = nullptr)
             *pnErr = 0 ;
          return szBuff ;
       }
-EGN_EXPORT const std::string ToStringAdv( unsigned int nVal, int nPrec = 1, int nRadix = 10, int* pnErr = nullptr) ;
+
+inline const std::string
+ToStringAdv( unsigned int nVal, int nPrec = 1, int nRadix = 10, int* pnErr = nullptr)
+      {
+        // eseguo conversione
+         const int nBuffSize = 36 ;
+         char szBuff[nBuffSize]{} ;
+         auto Res = std::to_chars( szBuff, szBuff + nBuffSize - 1, nVal, nRadix) ;
+         if ( Res.ec != std::errc()) {
+            if ( pnErr != nullptr)
+               *pnErr = int( Res.ec) ;
+            return "#Error" ;
+         }
+         // gestione codice di errore
+         if ( pnErr != nullptr)
+            *pnErr = 0 ;
+         // verifico lunghezza minima
+         int  nLen = (int) strlen( szBuff) ;
+         if ( nLen >= nPrec)
+            return szBuff ;
+         // porto la stringa alla minima lunghezza
+         std::string sBuff( szBuff)  ;
+         sBuff.insert( 0, ( nPrec - nLen), '0') ;
+         return sBuff ;
+      }
 inline const std::string
 ToString( unsigned int nVal, int nPrec = 1, int nRadix = 10, int* pnErr = nullptr)
       {
@@ -231,7 +278,38 @@ ToString( unsigned int nVal, int nPrec = 1, int nRadix = 10, int* pnErr = nullpt
             *pnErr = 0 ;
          return szBuff ;
       }
-EGN_EXPORT const std::string ToStringAdv( long long nVal, int nPrec = 1, int nRadix = 10, int* pnErr = nullptr) ;
+template <size_t size>
+const std::string ToString( const unsigned int (&nVal)[size], int nPrec = 1)
+      { std::string sDest ; sDest.reserve( 8 * size) ;
+        for ( const auto& nV : nVal)
+           sDest += ToString( nV, nPrec) + "," ;
+        sDest.pop_back() ;
+        return sDest ; }
+
+inline const std::string
+ToStringAdv( long long nVal, int nPrec = 1, int nRadix = 10, int* pnErr = nullptr)
+      {
+        // eseguo conversione
+         const int nBuffSize = 68 ;
+         char szBuff[nBuffSize]{} ;
+         auto Res = std::to_chars( szBuff, szBuff + nBuffSize - 1, nVal, nRadix) ;
+         if ( Res.ec != std::errc()) {
+            if ( pnErr != nullptr)
+               *pnErr = int( Res.ec) ;
+            return "#Error" ;
+         }
+         // gestione codice di errore
+         if ( pnErr != nullptr)
+            *pnErr = 0 ;
+         // verifico lunghezza minima
+         int  nLen = (int) strlen( szBuff) ;
+         if ( nLen >= nPrec)
+            return szBuff ;
+         // porto la stringa alla minima lunghezza
+         std::string sBuff( szBuff)  ;
+         sBuff.insert( 0, ( nPrec - nLen), '0') ;
+         return sBuff ;
+      }
 inline const std::string
 ToString( long long nVal, int nPrec = 1, int nRadix = 10, int* pnErr = nullptr)
       {

EMkMachMgr.h

@@ -285,6 +285,7 @@ class __declspec( novtable) IMachMgr
       virtual bool GetClEntMove( int nEntId, int& nMove) const = 0 ;
       virtual bool GetClEntFlag( int nEntId, int& nFlag, int& nFlag2) const = 0 ;
       virtual bool GetClEntIndex( int nEntId, int& nIndex) const = 0 ;
+      virtual bool GetClEntFeed( int nEntId, double& dFeed) const = 0 ;
       virtual bool GetClEntAxesStatus( int nEntId, int& nStatus) const = 0 ;
       virtual bool GetClEntAxesMask( int nEntId, int& nMask) const = 0 ;
       virtual bool GetClEntAxesVal( int nEntId, DBLVECTOR& vAxes) const = 0 ;

EMkMachiningGeoConst.h

@@ -34,6 +34,7 @@ static std::string MCH_AUXVIEW = "AVIEW" ;
 static std::string MCH_TABS = "TABS" ;
 static std::string MCH_PV = "PV" ;
 static std::string MCH_ST = "ST" ;
+static std::string MCH_ST_DBL = "STDBL" ;
 static std::string MCH_CL = "CL" ;
 static std::string MCH_DBL = "DBL" ;
 static std::string MCH_PATH = "P" ;
@@ -49,6 +50,7 @@ static std::string MCH_CL_AGB_DWN = "AGBD" ;
 static std::string MCH_CL_AGB_IN = "AGBI" ;
 static std::string MCH_CL_AGB_OUT = "AGBO" ;
 static std::string MCH_CL_AGB_UP = "AGBU" ;
+static std::string MCH_CL_DBP = "DBP" ;
 // Nomi di entità di preview
 static std::string MCH_PV_CUT = "CUT" ;
 static std::string MCH_PV_PRE_CUT = "PRC" ;

EXeConst.h

@@ -69,7 +69,8 @@ enum ApprType{ APP_LINES = 0,                // come ICurve::APL_STD
                APP_LEFT_CONVEX_LINES = 11,   // come ICurve::APL_LEFT_CONVEX
                APP_RIGHT_LINES = 2,          // come ICurve::APL_RIGHT
                APP_RIGHT_CONVEX_LINES = 12,  // come ICurve::APL_RIGHT_CONVEX
-               APP_ARCS = 3} ;
+               APP_ARCS = 3,
+               APP_CUBIC_BEZIER = 4} ;
 
 //----------------- Costanti tipo punto intersezione Linea Curva ---------------
 enum CLiType { CLT_NONE =  0,

EXeExecutor.h

@@ -407,7 +407,7 @@ EXE_EXPORT int  ExeSurfTmOffset( int nParentId, const INTVECTOR& vIds, double dO
 EXE_EXPORT int  ExeSurfTmThickeningOffset( int nParentId, const INTVECTOR& vIds, double dOffs, double dLinTol, int nType) ;
 EXE_EXPORT int  ExeCreateSurfBezier( int nParentId, int nDegU, int nDegV, int nSpanU, int nSpanV, const PNTVECTOR& vPnt, int nRefType) ;
 EXE_EXPORT int  ExeCreateSurfBezierRational( int nParentId, int nDegU, int nDegV, int nSpanU, int nSpanV, const PNTUVECTOR& vPntW, int nRefType) ;
-EXE_EXPORT int  ExeCreateSurfBezierLeaves( int nParentId, int nSurfBzId, int nTextHeight = 50, bool bShowTrim = false, int* pnCount = nullptr) ;
+EXE_EXPORT int  ExeCreateSurfBezierLeaves( int nParentId, int nSurfBzId, int nTextHeight = 50, bool bShowTrim = false, bool bRefined = false, int* pnCount = nullptr) ;
 EXE_EXPORT int  ExeCreateBezierSphere( int nParentId, const Point3d& ptCenter, double dR, int nRefType) ;
 EXE_EXPORT int  ExeCreateSurfBezierTria2D( int nParentId, int nSurfBzId, int nTextHeight, bool bShowTrim, int* pnCount) ;
 EXE_EXPORT int  ExeCreateSurfBzByFlatContour( int nParentId, int nCrvId, double dLinTol) ;
@@ -424,7 +424,8 @@ EXE_EXPORT int  ExeCreateSurfBzByRevolve( int nParentId, int nCrvId,
                                            bool bCapEnds, double dLinTol, int nRefType) ;
 EXE_EXPORT int  ExeCreateSurfBzByPointCurve( int nParentId, int nCrvId, const Point3d& ptAx, bool bCapEnds, double dLinTol, int nRefType) ;
 EXE_EXPORT int  ExeCreateSurfBzRuled( int nParentId, int nCrvId1, int nCrvId2, int nRuledType, bool bCapEnds, double dLinTol) ;
-EXE_EXPORT int  ExeCreateSurfBzRuledGuided( int nParentId, int nCrvId1, int nCrvId2, int nLayGuides, bool bCapEnds, double dLinTol) ;
+EXE_EXPORT int  ExeCreateSurfBzRuledGuided( int nParentId, int nCrvId1, int nCrvId2, const BIPNTVECTOR& vGuidesCrv,
+                                            bool bCapEnds, double dLinTol, int nLayGuides = GDB_ID_NULL) ;
 EXE_EXPORT int  ExeCreateSurfBzSkinned( int nParentId, const INTVECTOR& nCrvId1, bool bCapEnds, double dLinTol) ;
 EXE_EXPORT int  ExeCreateSurfBzSwept( int nParentId, int nSectId, int nGuideId, const Vector3d& vtAx,
                                       bool bCapEnds, double dLinTol, int nRefType) ;
@@ -504,6 +505,7 @@ EXE_EXPORT int  ExeCopy( int nSouId, int nRefId, int nSonBeforeAfter) ;
 EXE_EXPORT int  ExeCopyEx( int nSouCtx, int nSouId, int nDestCtx, int nRefId, int nSonBeforeAfter) ;
 EXE_EXPORT int  ExeCopyGlob( int nSouId, int nRefId, int nSonBeforeAfter) ;
 EXE_EXPORT int  ExeCopyGlobEx( int nSouCtx, int nSouId, int nDestCtx, int nRefId, int nSonBeforeAfter) ;
+EXE_EXPORT bool ExeDuplicateGeomDB( int nSouCtx, int nDestCtx, bool bSkipTemp = false) ;
 EXE_EXPORT bool ExeRelocate( int nSouId, int nRefId, int nSonBeforeAfter) ;
 EXE_EXPORT bool ExeRelocateGlob( int nSouId, int nRefId, int nSonBeforeAfter) ;
 EXE_EXPORT bool ExeGroupSwap( int nId1, int nId2, bool bSwapRef, bool bMark) ;
@@ -853,6 +855,7 @@ EXE_EXPORT bool ExeSurfBezierGetPointNrmD1( int nSurfId, double dU, double dV, i
                                             Point3d& ptP, Vector3d& vtN, Vector3d& vtDerU, Vector3d& vtDerV) ;
 EXE_EXPORT int  ExeSurfBezierGetCurveU( int nSurfId, double dV, int nDestGrpId) ;
 EXE_EXPORT int  ExeSurfBezierGetCurveV( int nSurfId, double dU, int nDestGrpId) ;
+EXE_EXPORT bool ExeSurfBezParamsFromPoint( int nSurfId, const Point3d& ptOnSurf, int nDestGrpId) ;
 EXE_EXPORT bool ExeSurfBezierGetInfo( int nSurfId, int& nDegU, int& nDegV, int& nSpanU, int& nSpanV, bool& bIsRat, bool& bTrimmed) ;
 EXE_EXPORT int  ExeSurfBezierGetControlCurveU( int nSurfId, int nIndV, int nDestGrpId) ;
 EXE_EXPORT int  ExeSurfBezierGetControlCurveV( int nSurfId, int nIndU, int nDestGrpId) ;
@@ -965,7 +968,7 @@ EXE_EXPORT int  ExeTestRectPrismoidSurface( const Frame3d& frPrismoid, double dB
 EXE_EXPORT int  ExeTestCylSurface( const Frame3d& frCyl, double dR, double dH, int nSurfId, double dSafeDist, int nRefType) ;
 EXE_EXPORT int  ExeTestConeSurface( const Frame3d& frCone, double dR1, double dR2, double dH, int nSurfId, double dSafeDist, int nRefType) ;
 EXE_EXPORT int  ExeTestSpheSurface( const Point3d& ptCen, double dR, int nSurfId, double dSafeDist, int nRefType) ;
-EXE_EXPORT int  ExeTestSurfaceSurface( int nSurf1Id, int nSurf2Id, double dSafeDist) ;
+EXE_EXPORT int  ExeTestSurfaceSurface( int nSurf1Id, int nSurf2Id, double dSafeDist, bool bTestEnclosion = false) ;
 
 // Maximum Filler
 EXE_EXPORT bool ExeMaxFillerStart( void) ;
@@ -1290,6 +1293,7 @@ EXE_EXPORT bool ExeUpdateAllMachiningsEx( bool bStopOnFirstErr, std::string& sEr
 EXE_EXPORT bool ExeGetClEntMove( int nEntId, int& nMove) ;
 EXE_EXPORT bool ExeGetClEntFlag( int nEntId, int& nFlag, int& nFlag2) ;
 EXE_EXPORT bool ExeGetClEntIndex( int nEntId, int& nIndex) ;
+EXE_EXPORT bool ExeGetClEntFeed( int nEntId, double& dFeed) ;
 EXE_EXPORT bool ExeGetClEntAxesStatus( int nEntId, int& nStatus) ;
 EXE_EXPORT bool ExeGetClEntAxesMask( int nEntId, int& nMask) ;
 EXE_EXPORT bool ExeGetClEntAxesVal( int nEntId, DBLVECTOR& vAxes) ;
@@ -1497,3 +1501,29 @@ EXE_EXPORT bool ExeRedisAsyncGetMessage( int nIdConnection, const std::string& s
 // Base64
 EXE_EXPORT bool ExeBase64Encode( const std::string& sFile, std::string& sB64Dest) ;
 EXE_EXPORT bool ExeBase64Decode( const std::string& sB64Sou, const std::string& sFile) ;
+
+// Trimming
+EXE_EXPORT int  ExeTrimmingGetSurfTmFaceAdj( int nParentId, int nSurfId, int nTria, const Point3d& vPts,
+                                             double dAngTol, double dSize, double dSizeTol) ;
+EXE_EXPORT int  ExeTrimmingGetSurfTmFromStmFaces( int nParentId, int nSurfId, const INTVECTOR& vFaces) ;
+EXE_EXPORT bool ExeTrimmingGetAdjSurfs( const INTVECTOR& vSurfId, const INTVECTOR& vOtherSurfId, double dLinTol,
+                                        double dAngTol, double dAngFaceTol, INTVECTOR& vResId) ;
+EXE_EXPORT bool ExeTrimmingGetBorders( int nParentId, const SELVECTOR& vIds, double dSurfLinTol, double dSurfAngTol,
+                                       double dLinTol, double dAngTol, int& nFirstId,  int& nCount) ;
+EXE_EXPORT bool ExeTrimmingGetBordersByNormals( int nParentId, const SELVECTOR& vIds, double dSurfLinTol,
+                                                double dSurfAngTol, double dLinTol, double dAngTol,
+                                                double dThick, int& nFirstId, int& nCount) ;
+EXE_EXPORT bool ExeTrimmingGetFinalBorders( int nParentId, const INTVECTOR& vCrvBezierId, double dLinTol, double dAngTol,
+                                            const PNTVECTOR& vBreakingPts, double dThick, double dThickTol,
+                                            int& nFirstId, int& nCount) ;
+EXE_EXPORT int  ExeTrimmingGetRuledBezier( int nParentId, const INTVECTOR& vIds, int nEdge1Id, int nEdge2Id, double dLinTol,
+                                           const INTVECTOR& vnLineIds) ;
+EXE_EXPORT bool ExeTrimmingInterpolateSyncLines( int nParentId, int nSync1Id, int nSync2Id,
+                                                 int nBorder1Id, int nBorder2Id, double dEdgeLinTol,
+                                                 double dEdgeAngTol, int& nFirstId, int& nCount) ;
+EXE_EXPORT bool ExeTrimmingGetSurfBzSyncPoints( int nParentId, int nEdge1Id, int nEdge2Id, double dLinTol,
+                                                double dAngTol, int nLineNbr, bool bShowOnCorners,
+                                                int& nFirstId, int& nCount) ;
+EXE_EXPORT bool ExeTrimmingGetHoleBorder( int nParentId, const INTVECTOR& vSurfIds, const INTVECTOR& vOtherSurfIds,
+                                          double dSurfLinTol, double dSurfAngTol, double dEdgeLinTol, double dEdgeAngTol,
+                                          double dEdgeThick, int& nFirstId, int& nCount) ;

EgtKeyCodes.h

@@ -1,7 +1,7 @@
 //----------------------------------------------------------------------------
-//  EgalTech 2015-2025
+//  EgalTech 2015-2026
 //----------------------------------------------------------------------------
-// File : EgtKeyCodes.h       Data : 01.11.25        Versione : 2.7k1
+// File : EgtKeyCodes.h       Data : 02.01.26        Versione : 3.1a1
 // Contenuto : Costanti per codici di protezione librerie di base.
 //
 //
@@ -19,6 +19,7 @@
 //             01.01.23 DS Passaggio a versione 25.
 //             16.01.24 DS Passaggio a versione 26.
 //             07.01.25 DS Passaggio a versione 27.
+//             02.01.26 DS Passaggio a versione 31.
 //
 //----------------------------------------------------------------------------
 
@@ -26,7 +27,7 @@
 
 //----------------------------------------------------------------------------
 const int KEY_BASELIB_PROD = 207 ;
-const int KEY_BASELIB_VER = 2712 ;
+const int KEY_BASELIB_VER = 3103 ;
 const int KEY_BASELIB_LEV = 1 ;
 
 //----------------------------------------------------------------------------