- Allineamento con common ver. 2.6i6

.gitignore

@@ -15,12 +15,3 @@
 /Wall/PocketingData.lua
 /Wall/SawingData.lua
 /Wall/Ts3Data.lua
-/.vscode
-/MachNotes.ini
-/ToolNotes.ini
-
-# ignoro file bak nella cartella principale e nelle sottocartelle al primo livello
-*.bak
-/*/*.bak
-
-Wall/SurfacingData.lua

.gitlab-ci.yml

@@ -48,7 +48,7 @@ variables:
       echo "-----------------------"
       $customerPathR = $env:MACHINES_PATH_R + "\" + $env:MANUFACTURER
       ROBOCOPY /MIR "$env:SRC_PATH" "$customerPathR\$env:MACH_NAME\" /XD "bin"
-      ROBOCOPY "$env:TEST_PATH" "$customerPathR\_TestMachines\$env:MACH_NAME\$env:MACH_NAME_TEST\" /E /XD "bin"
+      ROBOCOPY "$env:TEST_PATH" "$customerPathR\_TestMachines\$env:MACH_NAME_TEST\" /E /XD "bin"
       ROBOCOPY /MIR "$env:BASE_PATH" "$customerPathR\_Deploy\$env:MACH_NAME\$env:MACH_VERS\" /XD "bin" /XD "$env:MACH_NAME_TEST"
       SLEEP 2
       net use R: /delete

Beam/BeamData.lua

@@ -104,8 +104,8 @@ if EgtExistsFile( sData) then
         if Machine.Offsets.PRECUT_HEAD_DISABLE then BeamData.PRECUT_HEAD = ( Machine.Offsets.PRECUT_HEAD_DISABLE == 0) end
         if Machine.Offsets.PRECUT_TAIL_DISABLE then BeamData.PRECUT_TAIL = ( Machine.Offsets.PRECUT_TAIL_DISABLE == 0) end
         if Machine.Offsets.MIN_HEIGHT_ADDED_CUTS then BeamData.MIN_HEIGHT_ADDED_CUTS = min( Machine.Offsets.MIN_HEIGHT_ADDED_CUTS, BeamData.MIN_HEIGHT_ADDED_CUTS) end
-        if Machine.Offsets.NEWCLAMPING ~= nil then BeamData.NEWCLAMPING = Machine.Offsets.NEWCLAMPING end
-        if Machine.Offsets.FASTCLAMPING ~= nil then BeamData.FASTCLAMPING = Machine.Offsets.FASTCLAMPING end
+        if Machine.Offsets.NEWCLAMPING ~= nil then BeamData.NEWCLAMPING = ( Machine.Offsets.NEWCLAMPING == 1) end
+        if Machine.Offsets.FASTCLAMPING ~= nil then BeamData.FASTCLAMPING = ( Machine.Offsets.FASTCLAMPING == 1) end
       end
       if Machine.Trave then
          BeamData.MIN_WIDTH = Machine.Trave.XMIN or BeamData.MIN_WIDTH
@@ -169,14 +169,15 @@ end
 BeamData.GetBlockedAxis = GetBlockedAxis
 
 ---------------------------------------------------------------------
-local function GetChainSawInitAngs( vtN, vtO)
-   if vtN:getY() > 0 and vtO:getX() > 0 then
-      return 'C=0'
-   else
+local function GetChainSawInitAngs( vtN, vtO, nInd)
+   if nInd == 1 then
       return ''
+   else
+      return EgtIf( vtN:getY() > 0, 'C=180', 'C=-180')
    end
 end
 BeamData.GetChainSawInitAngs = GetChainSawInitAngs
+
 ---------------------------------------------------------------------
 local function GetSetupInfo( sHead)
    local SetupInfo = {}
@@ -213,5 +214,32 @@ local function GetSetupInfo( sHead)
 end
 BeamData.GetSetupInfo = GetSetupInfo
 
+---------------------------------------------------------------------
+local function GetMaxMatReductionBladeCut( sHead, vtDir)
+   local MaxMatReductionBladeCut = 0
+   -- la lama è montata solo su H2, non si controllano altre teste
+   if sHead == 'H2' then
+      if BeamData.NEWTOPC == nil or BeamData.NEWTOPC then
+         MaxMatReductionBladeCut = -65
+      end
+      if AreSameVectorApprox( vtDir, X_AX()) then
+         MaxMatReductionBladeCut = MaxMatReductionBladeCut + 175
+      elseif AreSameVectorApprox( vtDir, -X_AX()) then
+         MaxMatReductionBladeCut = MaxMatReductionBladeCut + 175
+      elseif AreSameVectorApprox( vtDir, Y_AX()) then
+         MaxMatReductionBladeCut = MaxMatReductionBladeCut + 175
+      elseif AreSameVectorApprox( vtDir, -Y_AX()) then
+         MaxMatReductionBladeCut = MaxMatReductionBladeCut + 175
+      elseif AreSameVectorApprox( vtDir, Z_AX()) then
+         MaxMatReductionBladeCut = 80
+      elseif AreSameVectorApprox( vtDir, -Z_AX()) then
+         MaxMatReductionBladeCut = 80
+      end
+      MaxMatReductionBladeCut = MaxMatReductionBladeCut + BeamData.COLL_SIC
+   end
+   return MaxMatReductionBladeCut + BeamData.COLL_SIC
+end
+BeamData.GetMaxMatReductionBladeCut = GetMaxMatReductionBladeCut
+
 ---------------------------------------------------------------------
 return BeamData

Common_FAST.NUM.mlpe

@@ -3,6 +3,7 @@
 
 -- carico librerie
 local INFO_STD_PP = require( 'Version')
+local BD = require( 'BeamData')
 
 -- Variabili di modulo
 local CSP_INFO =     INFO_STD_PP.NAME..'  ver.'..INFO_STD_PP.VERSION..' by EgalWare s.r.l.'
@@ -602,6 +603,8 @@ end
 
 ---------------------------------------------------------------------
 function OnRapid()
+   -- recupero prossimo utensile
+   EMT.NEXTTOOL, EMT.NEXTHEAD, EMT.NEXTTCPOS = FindNextTool()
    MyBackupAxes()
    -- se primo movimento della lavorazione, gestione speciale
    if EMT.MCHFIRST and not EMT.OPEISDISP then
@@ -833,6 +836,26 @@ function OnRapid()
       EmtAdjustRotaryAxes()
       EmitZmax()
       EMT.ZMAX = true
+      -- se pezzi alti e devo cambiare utensile su testa con CU, porto la testa vicino al cambio utensile
+      if EMT.ST > BeamHeightForFixRot  and  EMT.HEAD == 'H1' and  EMT.TOOL ~= EMT.NEXTTOOL  and  EMT.NEXTHEAD ~= 'H2' then
+         local dBAxis = 90
+         local dCAxis = EgtIf( BD.RIGHT_LOAD, 90, -90)         
+         local sEE = ' EE3'
+         local sEL = ' EL' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TLEN, ( EMT.TDIST or ChSawLen)), 3)
+         local sER = ' ER' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TDIAM / 2, EMT.TLEN), 3)
+         local sET = GetET( EMT.HEAD, EMT.TCPOS, EMT.R3)
+         local sES = ' ES'..EgtNumToString( EMT.S, 0)
+         local sOut = 'G101' .. EmtGetAxis( 'L2') .. EmtGetAxis( 'L3') ..' B=' .. EgtNumToString( dBAxis, 3) ..
+                      ' C=' .. EgtNumToString( dCAxis, 3) .. sEE .. sEL .. sER .. sET .. sES
+         EmtOutput( sOut)
+         EmtOutput( 'M101 P1=2')
+         EmtOutput( 'M101 P1=3')
+         sOut = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. EmtGetAxis( 'L3') ..' B=' .. EgtNumToString( dBAxis, 3) ..
+                ' C=' .. EgtNumToString( dCAxis, 3) .. sEE .. sEL .. sER .. sET .. sES
+         EmtOutput( sOut)
+         EmtOutput( 'M101 P1=2')
+         EmtOutput( 'M101 P1=3')
+      end
    -- se altrimenti movimento in Home
    elseif EMT.FLAG == 4 then
       -- non previsto
@@ -956,6 +979,35 @@ function OnArc()
    EmtUpdatePrev()
 end
 
+---------------------------------------------------------------------
+function FindNextTool()
+   -- salvo stato iniziale
+   local CurrMachId = EgtGetCurrMachining()
+   local CurrTool = EgtTdbGetCurrToolParam( MCH_TP.NAME)
+   -- cerco lavorazione con utensile su gruppo testa indicato
+   local sTool, sHead, sTcPos
+   local OpId = EgtGetNextActiveOperation( CurrMachId or EMT.MCHID)
+   while OpId do
+      local nType = EgtGetOperationType( OpId)
+      if nType ~= MCH_OY.NONE  and  nType ~= MCH_OY.DISP then
+         if EgtSetCurrMachining( OpId) then
+            sTool = EgtGetMachiningParam( MCH_MP.TOOL)
+            if EgtTdbSetCurrTool( sTool) then
+               sHead = EgtTdbGetCurrToolParam( MCH_TP.HEAD)
+               sTcPos = EgtTdbGetCurrToolParam( MCH_TP.TCPOS)
+               break
+            end
+         end
+      end
+      OpId = EgtGetNextActiveOperation( OpId)
+   end
+   -- ripristino stato iniziale
+   EgtSetCurrMachining( CurrMachId or GDB_ID.NULL)
+   EgtTdbSetCurrTool( CurrTool or '')
+   -- restituisco risultato
+   return sTool, sHead, sTcPos
+end
+
 ---------------------------------------------------------------------
 function CalcCharStatus( sCmd, bSkipPress)
    -- aperto

Common_FAST.NUM_PLUS.mlpe

@@ -3,6 +3,7 @@
 
 -- carico librerie
 local INFO_STD_PP = require( 'Version')
+local BD = require( 'BeamData')
 
 -- Variabili di modulo
 local CSP_INFO =     INFO_STD_PP.NAME..'  ver.'..INFO_STD_PP.VERSION..' by EgalWare s.r.l.'
@@ -642,6 +643,8 @@ end
 
 ---------------------------------------------------------------------
 function OnRapid()
+   -- recupero prossimo utensile
+   EMT.NEXTTOOL, EMT.NEXTHEAD, EMT.NEXTTCPOS = FindNextTool()
    MyBackupAxes()
    -- se primo movimento della lavorazione, gestione speciale
    if EMT.MCHFIRST and not EMT.OPEISDISP then
@@ -907,6 +910,26 @@ function OnRapid()
       EmtAdjustRotaryAxes()
       EmitZmax( false)
       EMT.ZMAX = true
+      -- se pezzi alti e devo cambiare utensile su testa con CU, porto la testa vicino al cambio utensile
+      if EMT.ST > BeamHeightForFixRot  and  EMT.HEAD == 'H1' and  EMT.TOOL ~= EMT.NEXTTOOL  and  EMT.NEXTHEAD ~= 'H2' then
+         local dBAxis = 90
+         local dCAxis = EgtIf( BD.RIGHT_LOAD, 90, -90)         
+         local sEE = ' EE3'
+         local sEL = ' EL' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TLEN, ( EMT.TDIST or ChSawLen)), 3)
+         local sER = ' ER' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TDIAM / 2, EMT.TLEN), 3)
+         local sET = GetET( EMT.HEAD, EMT.TCPOS, EMT.R3)
+         local sES = ' ES'..EgtNumToString( EMT.S, 0)
+         local sOut = 'G101' .. EmtGetAxis( 'L2') .. EmtGetAxis( 'L3') ..' B=' .. EgtNumToString( dBAxis, 3) ..
+                      ' C=' .. EgtNumToString( dCAxis, 3) .. sEE .. sEL .. sER .. sET .. sES
+         EmtOutput( sOut)
+         EmtOutput( 'M101 P1=2')
+         EmtOutput( 'M101 P1=3')
+         sOut = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. EmtGetAxis( 'L3') ..' B=' .. EgtNumToString( dBAxis, 3) ..
+                ' C=' .. EgtNumToString( dCAxis, 3) .. sEE .. sEL .. sER .. sET .. sES
+         EmtOutput( sOut)
+         EmtOutput( 'M101 P1=2')
+         EmtOutput( 'M101 P1=3')
+      end
    -- se altrimenti movimento in Home
    elseif EMT.FLAG == 4 then
       -- non previsto
@@ -1035,6 +1058,35 @@ function OnArc()
    EmtUpdatePrev()
 end
 
+---------------------------------------------------------------------
+function FindNextTool()
+   -- salvo stato iniziale
+   local CurrMachId = EgtGetCurrMachining()
+   local CurrTool = EgtTdbGetCurrToolParam( MCH_TP.NAME)
+   -- cerco lavorazione con utensile su gruppo testa indicato
+   local sTool, sHead, sTcPos
+   local OpId = EgtGetNextActiveOperation( CurrMachId or EMT.MCHID)
+   while OpId do
+      local nType = EgtGetOperationType( OpId)
+      if nType ~= MCH_OY.NONE  and  nType ~= MCH_OY.DISP then
+         if EgtSetCurrMachining( OpId) then
+            sTool = EgtGetMachiningParam( MCH_MP.TOOL)
+            if EgtTdbSetCurrTool( sTool) then
+               sHead = EgtTdbGetCurrToolParam( MCH_TP.HEAD)
+               sTcPos = EgtTdbGetCurrToolParam( MCH_TP.TCPOS)
+               break
+            end
+         end
+      end
+      OpId = EgtGetNextActiveOperation( OpId)
+   end
+   -- ripristino stato iniziale
+   EgtSetCurrMachining( CurrMachId or GDB_ID.NULL)
+   EgtTdbSetCurrTool( CurrTool or '')
+   -- restituisco risultato
+   return sTool, sHead, sTcPos
+end
+
 ---------------------------------------------------------------------
 function CalcDinamicaPinze( dH, dS, dL)
    local MinTempoAcc = 0.3                         -- [s]

Common_FAST.TPA.mlpe

@@ -3,6 +3,7 @@
 
 -- carico librerie
 local INFO_STD_PP = require( 'Version')
+local BD = require( 'BeamData')
 
 -- Variabili di modulo
 local CSP_INFO =     INFO_STD_PP.NAME..'  ver.'..INFO_STD_PP.VERSION..' by EgalWare s.r.l.'
@@ -625,6 +626,8 @@ end
 
 ---------------------------------------------------------------------
 function OnRapid()
+   -- recupero prossimo utensile
+   EMT.NEXTTOOL, EMT.NEXTHEAD, EMT.NEXTTCPOS = FindNextTool()
    MyBackupAxes()
    -- se primo movimento della lavorazione, gestione speciale
    if EMT.MCHFIRST and not EMT.OPEISDISP then
@@ -849,6 +852,25 @@ function OnRapid()
       EmtAdjustRotaryAxes()
       EmitZmax( true)
       EMT.ZMAX = true
+      -- se pezzi alti e devo cambiare utensile su testa con CU, porto la testa vicino al cambio utensile
+      if EMT.ST > BeamHeightForFixRot  and  EMT.HEAD == 'H1' and  EMT.TOOL ~= EMT.NEXTTOOL  and  EMT.NEXTHEAD ~= 'H2' then
+         local dBAxis = 90
+         local dCAxis = EgtIf( BD.RIGHT_LOAD, 90, -90)
+         local sOut = 'M101 P1=1' .. ' P2=' .. EmtLenToString( EMT.L2, 3) .. ' P3=' .. EmtLenToString( EMT.L3, 3) ..
+                      ' P4=' .. EgtNumToString( dBAxis, 3) .. ' P5=' .. EgtNumToString( dCAxis, 3) .. 
+                      ' P6=' .. AdjustTcPos( false) .. ' P7=' .. EgtNumToString( EMT.S, 0) ..
+                      ' P8=0' .. ' P9=0' .. ' P10=3'
+         EmtOutput( sOut)
+         EmtOutput( 'M101 P1=2')
+         EmtOutput( 'M101 P1=3')
+         sOut = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, 3) .. ' P3=' .. EmtLenToString( EMT.L3, 3) ..
+                      ' P4=' .. EgtNumToString( dBAxis, 3) .. ' P5=' .. EgtNumToString( dCAxis, 3) .. 
+                      ' P6=' .. AdjustTcPos( false) .. ' P7=' .. EgtNumToString( EMT.S, 0) ..
+                      ' P8=0' .. ' P9=0' .. ' P10=3'
+         EmtOutput( sOut)
+         EmtOutput( 'M101 P1=2')
+         EmtOutput( 'M101 P1=3')
+      end
    -- se altrimenti movimento in Home
    elseif EMT.FLAG == 4 then
       -- non previsto
@@ -992,6 +1014,35 @@ function OnArc()
    EmtUpdatePrev()
 end
 
+---------------------------------------------------------------------
+function FindNextTool()
+   -- salvo stato iniziale
+   local CurrMachId = EgtGetCurrMachining()
+   local CurrTool = EgtTdbGetCurrToolParam( MCH_TP.NAME)
+   -- cerco lavorazione con utensile su gruppo testa indicato
+   local sTool, sHead, sTcPos
+   local OpId = EgtGetNextActiveOperation( CurrMachId or EMT.MCHID)
+   while OpId do
+      local nType = EgtGetOperationType( OpId)
+      if nType ~= MCH_OY.NONE  and  nType ~= MCH_OY.DISP then
+         if EgtSetCurrMachining( OpId) then
+            sTool = EgtGetMachiningParam( MCH_MP.TOOL)
+            if EgtTdbSetCurrTool( sTool) then
+               sHead = EgtTdbGetCurrToolParam( MCH_TP.HEAD)
+               sTcPos = EgtTdbGetCurrToolParam( MCH_TP.TCPOS)
+               break
+            end
+         end
+      end
+      OpId = EgtGetNextActiveOperation( OpId)
+   end
+   -- ripristino stato iniziale
+   EgtSetCurrMachining( CurrMachId or GDB_ID.NULL)
+   EgtTdbSetCurrTool( CurrTool or '')
+   -- restituisco risultato
+   return sTool, sHead, sTcPos
+end
+
 ---------------------------------------------------------------------
 function CalcDinamicaPinze( dH, dS, dL)
    local MinTempoAcc = 0.3                         -- [s]

Essetre-FASTrl.mlde

@@ -34,13 +34,14 @@
 -- 2024/09/16 ver 2.6i3 Allineamento con common ver. 2.6i2
 -- 2024/09/18 ver 2.6i4 Modificato YAML per comunicazione versioni a LiMan. Aggiunta PP_NVER, versione macchina in formato numerico.
 -- 2024/09/24 ver 2.6i5 Allineamento con common ver. 2.6i4
--- 2024/09/24 ver 2.6i6 Allineamento con common ver. 2.6i9
+-- 2024/09/24 ver 2.6i6 Allineamento con common ver. 2.6i5
+-- 2024/09/25 ver 2.6i7 Allineamento con common ver. 2.6i6
 
 require( 'EmtGenerator')
 EgtEnableDebug( false)
 
-PP_VER = '2.6i6'
-PP_NVER = '2.6.9.6'
+PP_VER = '2.6i7'
+PP_NVER = '2.6.9.7'
 MIN_MACH_VER = '2.5k1'
 MACH_NAME = 'Essetre-FASTrl'
 

UpdateLog.txt

@@ -1,5 +1,8 @@
            ==== Common_FAST Update Log ====
 
+Versione 2.6i6 (25/09/2024)
+- (GEN) Migliorata gestione movimenti per portare testa vicino a cambio utensile se trave alta. Ticket#2066
+
 Versione 2.6i5 (24/09/2024)
 - (SIM-GEN) Tolto controllo su lunghezza maggiore di 200mm introdotto con 2.6i2 perchè non completamente funzionante
 - (GEN) Gestione in OnRapid() di EMT.FLAG=5 (rotazione a Z max per lavorazione successiva). Ora allineata alla simulazione

Version.lua

@@ -3,7 +3,7 @@
 
 local InfoCommon_STD_PP = {
    NAME = 'Common_FAST',            -- nome script PP standard
-   VERSION = '2.6i5',                 -- versione script
+   VERSION = '2.6i6',                 -- versione script
    MIN_MACH_VER_PP_COMMON = '2.5k1'   -- versione minima kernel
 }