EgtGeomKernel :

Modifiche a CalcPocketing
- rimozione variabili statiche
- aggiunti casi ottimizzati Spiral
- estensione superfici sui lati aperti.

AdjustLoops.cpp

@@ -317,6 +317,8 @@ AdjustLoops( ICurve* pCurve, ICURVEPLIST& CrvLst, bool bNeedSameProp)
          pCrvCo->RemoveSmallDefects( 2 * LIN_TOL_MIN, ANG_TOL_STD_DEG, true) ;
         // unisco eventuali tratti allineati
          pCrvCo->MergeCurves( LIN_TOL_MIN, ANG_TOL_STD_DEG, true, bNeedSameProp) ;
+        // richiudo i loop per sicurezza
+         pCrvCo->Close() ;
       }
    }
 

CAvToolSurfTm.cpp

@@ -120,7 +120,7 @@ CAvToolSurfTm::TestPosition( const Point3d& ptT, const Vector3d& vtDir, const Ve
 
 //----------------------------------------------------------------------------
 bool
-CAvToolSurfTm::TestPath( PNTULIST& lPntM, const Vector3d& vtDir, const Vector3d& vtMove, double dLinTol)
+CAvToolSurfTm::TestPath( PNTULIST& lPntM, const Vector3d& vtDir, const Vector3d& vtMove, double dLinTol, double dProgCoeff)
 {
   // Se utensile non definito, errore
    if ( m_Tool.GetType() == Tool::UNDEF)
@@ -146,8 +146,9 @@ CAvToolSurfTm::TestPath( PNTULIST& lPntM, const Vector3d& vtDir, const Vector3d&
    bool bOk = true ;
   // Se un solo thread o pochi punti
    if ( nThreadMax <= 1  ||  m_nTotPnt < 500) {
-      bOk = TestSubPath( -1, lPntM, vtDir, dLinTol) ;
+      m_nCurrPnt = 0 ;
-      ProcessEvents( 100, 0) ;
+      bOk = TestSubPath( -1, lPntM, vtDir, dLinTol, dProgCoeff) ;
+      ProcessEvents( int( 100 * dProgCoeff), 0) ;
    }
   // altrimenti
    else {
@@ -167,7 +168,7 @@ CAvToolSurfTm::TestPath( PNTULIST& lPntM, const Vector3d& vtDir, const Vector3d&
       m_bBreak = false ;
       future<bool> vRes[MAX_PARTS] ;
       for ( int i = 0 ; i < nPartCnt ; ++ i)
-         vRes[i] = async( launch::async, &CAvToolSurfTm::TestSubPath, this, i, ref( vlPntM[i]), cref( vtDir), dLinTol) ;
+         vRes[i] = async( launch::async, &CAvToolSurfTm::TestSubPath, this, i, ref( vlPntM[i]), cref( vtDir), dLinTol, dProgCoeff) ;
      // attendo i risultati
       int nFin = 0 ;
       int nNextPE = 0 ;
@@ -179,7 +180,7 @@ CAvToolSurfTm::TestPath( PNTULIST& lPntM, const Vector3d& vtDir, const Vector3d&
             }
          }
          if ( m_nCurrPnt > nNextPE) {
-            int nRes = ProcessEvents( int( m_nCurrPnt * 100. / m_nTotPnt), 10) ;
+            int nRes = ProcessEvents( int( m_nCurrPnt * 100. / m_nTotPnt * dProgCoeff), 10) ;
             nNextPE += STEP_PE ;
             if ( nRes == 1)
                m_bBreak = true ;
@@ -191,7 +192,7 @@ CAvToolSurfTm::TestPath( PNTULIST& lPntM, const Vector3d& vtDir, const Vector3d&
             lPntM.pop_back() ;
          lPntM.splice( lPntM.end(), vlPntM[i]) ;
       }
-      ProcessEvents( 100, 0) ;
+      ProcessEvents( int( 100 * dProgCoeff), 0) ;
    }
   // pulisco HashGrid 2d
    m_HGrids.Clear() ;
@@ -200,7 +201,7 @@ CAvToolSurfTm::TestPath( PNTULIST& lPntM, const Vector3d& vtDir, const Vector3d&
 
 //----------------------------------------------------------------------------
 bool
-CAvToolSurfTm::TestSubPath( int nId, PNTULIST& lPntM, const Vector3d& vtDir, double dLinTol)
+CAvToolSurfTm::TestSubPath( int nId, PNTULIST& lPntM, const Vector3d& vtDir, double dLinTol, double dProgCoeff)
 {
   // Se lista vuota, non devo fare alcunché
    if ( lPntM.empty())
@@ -229,7 +230,7 @@ CAvToolSurfTm::TestSubPath( int nId, PNTULIST& lPntM, const Vector3d& vtDir, dou
       if ( nId == -1) {
         // gestione eventi (ogni STEP_PE punti)
          if (( m_nCurrPnt % STEP_PE) == 0) {
-            int nRes = ProcessEvents( int( m_nCurrPnt * 100. / m_nTotPnt), 0) ;
+            int nRes = ProcessEvents( int( m_nCurrPnt * 100. / m_nTotPnt * dProgCoeff), 0) ;
             if ( nRes == 1)
                return false ;
          }

CAvToolSurfTm.h

@@ -37,13 +37,13 @@ class CAvToolSurfTm : public ICAvToolSurfTm
       const ICurveComposite& GetToolOutline( bool bApprox = false) const override
                   { return ( bApprox ? m_Tool.GetApproxOutline() : m_Tool.GetOutline()) ;}
       bool TestPosition( const Point3d& ptT, const Vector3d& vtDir, const Vector3d& vtMove, double& dTotDist) override ;
-      bool TestPath( PNTULIST& lPntM, const Vector3d& vtDir, const Vector3d& vtMove, double dLinTol) override ;
+      bool TestPath( PNTULIST& lPntM, const Vector3d& vtDir, const Vector3d& vtMove, double dLinTol, double dProgCoeff = 1) override ;
 
    public :
       CAvToolSurfTm( void) ;
 
    private :
-      bool   TestSubPath( int nId, PNTULIST& lPntM, const Vector3d& vtDir, double dLinTol) ;
+      bool   TestSubPath( int nId, PNTULIST& lPntM, const Vector3d& vtDir, double dLinTol, double dProgCoeff) ;
       double MyTestPosition( Point3d& ptT, const Vector3d& vtDir) ;
       double MyTestPositionHG( Point3d& ptT, const Vector3d& vtDir) ;
       bool   MyTestMidPointHG( PNTULIST& lPntM, const PNTULIST::iterator& itPntMPrev, const PNTULIST::iterator& itPntMCurr,

CurveComposite.cpp

@@ -291,9 +291,15 @@ CurveComposite::Close( void)
       return true ;
   // se molto vicini li modifico
    if ( AreSamePointEpsilon( ptStart, ptEnd, 10 * EPS_SMALL)) {
+     // se un solo arco
+      if ( m_CrvSmplS.size() == 1  &&  m_CrvSmplS.front()->GetType() == CRV_ARC) {
+         CurveArc* pArc = GetBasicCurveArc( m_CrvSmplS.front()) ;
+         return pArc->ChangeAngCenter( pArc->GetAngCenter() > 0 ? ANG_FULL : -ANG_FULL) ;
+      }
+     // caso generale
       Point3d ptMid = Media( ptStart, ptEnd) ;
-      if ( ! ModifyStart( ptMid)  ||
+      if ( ! m_CrvSmplS.front()->ModifyStart( ptMid)  ||
-           ! ModifyEnd( ptMid))
+           ! m_CrvSmplS.back()->ModifyEnd( ptMid))
          return false ;
    }   
   // altrimenti aggiungo la linea di chiusura
@@ -879,8 +885,10 @@ CurveComposite::TestClosure( void)
    // se distanza superiore al limite ridotto forzo i punti a coincidere
    if ( ! AreSamePointEpsilon( ptStart, ptEnd, EPS_CONNECT)) {
      // se un solo arco
-      if ( m_CrvSmplS.size() == 1  &&  m_CrvSmplS.front()->GetType() == CRV_ARC)
+      if ( m_CrvSmplS.size() == 1  &&  m_CrvSmplS.front()->GetType() == CRV_ARC) {
-         return GetBasicCurveArc( m_CrvSmplS.front())->ChangeAngCenter( ANG_FULL) ;
+         CurveArc* pArc = GetBasicCurveArc( m_CrvSmplS.front()) ;
+         return pArc->ChangeAngCenter( pArc->GetAngCenter() > 0 ? ANG_FULL : -ANG_FULL) ;
+      }
      // caso generale
       Point3d ptM = Media( ptStart, ptEnd) ;
       return ( m_CrvSmplS.front()->ModifyStart( ptM)  &&