Merge remote-tracking branch 'origin/develop'

Common_FAST.NUM.mlpe

@@ -496,6 +496,7 @@ function OnMachiningEnd()
    EMT.U_STD = nil
    EMT.PREVTOOL = EMT.TOOL
    EMT.PREVHEAD = EMT.HEAD
+   EMT.PREVET = GetET( EMT.HEAD, EMT.TCPOS, EMT.R3)
 end
 
 ---------------------------------------------------------------------
@@ -626,11 +627,19 @@ function OnRapid()
          end
       end
 
+      local sET = GetET( EMT.HEAD, EMT.TCPOS, EMT.R3)
+
+      local bGoToHome = false
+      -- se gli assi rotanti cambiano parecchio, con motosega si va in parcheggio 
+      if EMT.PREVHEAD == 'H3' and EMT.HEAD == 'H3' and sET == EMT.PREVET and ( abs( EMT.R2pp - EMT.R2) > 25 or abs( EMT.R1pp - EMT.R1) > 25)  then
+         bGoToHome = true
+      end
+
       -- primo posizionamento
       local MyZHome = EgtGetAxisHomePos( 'Z')
       local bZmax = ( #EMT.AUXSTR > 0  or  EMT.TOOL ~= EMT.PREVTOOL  or  EMT.L3 > -1)
       -- se avevo motosega, torno in zona sicura senza ruotare assi rotanti
-      if not EMT.LOAD and EMT.PREVHEAD == 'H3' and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
+      if not EMT.LOAD and EMT.PREVHEAD == 'H3' and (EMT.ST > BeamHeightForFixRot or bGoToHome) and EMT.FLAG2 == 1 then
          local sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
                                        ' B' .. EmtLenToString( EMT.R2pp, 3) .. ' C' .. EmtLenToString( EMT.R1pp, 3) .. 
                                        ' EE' .. EgtIf( bZmax, '3', '4') .. EMT.PREVsEL .. EMT.PREVsER .. EMT.PREVsET .. EMT.PREVsES
@@ -648,15 +657,23 @@ function OnRapid()
       local sEE = ' EE' .. EgtIf( bZmax, '3', '4')
       local sEL = ' EL' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TLEN, ( EMT.TDIST or ChSawLen)), 3)
       local sER = ' ER' .. EmtLenToString( EgtIf( EMT.HEAD ~= 'H3', EMT.TDIAM / 2, EMT.TLEN), 3)
-      local sET = GetET( EMT.HEAD, EMT.TCPOS, EMT.R3)
       local sES = ' ES'..EgtNumToString( EMT.S, 0)
 
       -- se carico motosega, ruoto in zona sicura prima di approcciare la lavorazione
-      if not EMT.LOAD and ( EMT.HEAD == 'H3' or ( bZmax and EMT.TTOTLEN > 200)) and 
-         ( EMT.ST > BeamHeightForFixRot or ( EMT.HEAD == 'H1' and EMT.TTOTLEN > 350)) and EMT.FLAG2 == 1 then
+      if not EMT.LOAD and ( EMT.HEAD == 'H3' or ( bZmax and EMT.TTOTLEN > 200)) and
+         ( EMT.ST > BeamHeightForFixRot or ( EMT.HEAD == 'H1' and EMT.TTOTLEN > 350) or bGoToHome) and EMT.FLAG2 == 1 then
          local sEEPreMove = ' EE' .. EgtIf( bZmax, '3', '4')
-         local sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
-                                       EmtGetAxis( 'R2') .. EmtGetAxis( 'R1') .. sEE .. sEL .. sER .. sET .. sES
+         local sOutPreMove
+         if EMT.HEAD == 'H3' and bGoToHome then
+            sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
+                                       ' B' .. EgtNumToString( 0, 3) .. ' C' .. EgtNumToString( EMT.R1pp, 3) .. sEE .. sEL .. sER .. sET .. sES
+            EmtOutput( sOutPreMove)
+            sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
+                                       ' B' .. EgtNumToString( 0, 3) .. ' C' .. EgtNumToString( EMT.R1, 3) .. sEE .. sEL .. sER .. sET .. sES
+            EmtOutput( sOutPreMove)
+         end
+         sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
+                                       ' B' .. EgtNumToString( EMT.R2, 3) .. ' C' .. EgtNumToString( EMT.R1, 3) .. sEE .. sEL .. sER .. sET .. sES
          EmtOutput( sOutPreMove)
          EmtOutput( 'G101 ET1001')
          EmtOutput( 'G101 ET2001')

Common_FAST.NUM_PLUS.mlpe

@@ -544,6 +544,7 @@ function OnMachiningEnd()
    EMT.PREVTOOL = EMT.TOOL
    EMT.PREVHEAD = EMT.HEAD
    EMT.PREVR3 = EMT.R3
+   EMT.PREVET = GetET( EMT.HEAD, EMT.TCPOS, EMT.R3)
 end
 
 ---------------------------------------------------------------------
@@ -675,11 +676,19 @@ function OnRapid()
          end
       end
 
+      local sET = GetET( EMT.HEAD, EMT.TCPOS, EMT.R3)
+
+      local bGoToHome = false
+      -- se gli assi rotanti cambiano parecchio, con motosega si va in parcheggio 
+      if EMT.PREVHEAD == 'H3' and EMT.HEAD == 'H3' and sET == EMT.PREVET and ( abs( EMT.R2pp - EMT.R2) > 25 or abs( EMT.R1pp - EMT.R1) > 25)  then
+         bGoToHome = true
+      end
+
       -- primo posizionamento
       local MyZHome = EgtGetAxisHomePos( 'Z')
       local bZmax = ( #EMT.AUXSTR > 0  or  EMT.TOOL ~= EMT.PREVTOOL  or  EMT.L3 > -1)
       -- se avevo motosega, torno in zona sicura senza ruotare assi rotanti
-      if not EMT.LOAD and EMT.PREVHEAD == 'H3' and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
+      if not EMT.LOAD and EMT.PREVHEAD == 'H3' and ( EMT.ST > BeamHeightForFixRot or bGoToHome) and EMT.FLAG2 == 1 then
          local sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
                                        ' B' .. EmtLenToString( EMT.R2pp, 3) .. ' C' .. EmtLenToString( EMT.R1pp, 3) .. 
                                        ' EE' .. EgtIf( bZmax, '3', '4') .. EMT.PREVsEL .. EMT.PREVsER .. EMT.PREVsET .. EMT.PREVsES
@@ -720,15 +729,23 @@ function OnRapid()
          sER = sER..EmtLenToString( EMT.TDIAM / 2, 3)
       end
 
-      local sET = GetET( EMT.HEAD, EMT.TCPOS, EMT.R3)
       local sES = ' ES'..EgtNumToString( EMT.S, 0)
 
       -- se carico motosega, ruoto in zona sicura prima di approcciare la lavorazione
       if not EMT.LOAD and ( EMT.HEAD == 'H3' or ( bZmax and EMT.TTOTLEN > 200)) and 
-         ( EMT.ST > BeamHeightForFixRot or ( EMT.HEAD == 'H1' and EMT.TTOTLEN > 350)) and EMT.FLAG2 == 1 then
+         ( EMT.ST > BeamHeightForFixRot or ( EMT.HEAD == 'H1' and EMT.TTOTLEN > 350) or bGoToHome) and EMT.FLAG2 == 1 then
          local sEEPreMove = ' EE' .. EgtIf( bZmax, '3', '4')
-         local sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
-                                       EmtGetAxis( 'R2') .. EmtGetAxis( 'R1') .. sEE .. sEL .. sER .. sET .. sES
+         local sOutPreMove
+         if EMT.HEAD == 'H3' and bGoToHome then
+            sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
+                                       ' B' .. EgtNumToString( 0, 3) .. ' C' .. EgtNumToString( EMT.R1pp, 3) .. sEE .. sEL .. sER .. sET .. sES
+            EmtOutput( sOutPreMove)
+            sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
+                                       ' B' .. EgtNumToString( 0, 3) .. ' C' .. EgtNumToString( EMT.R1, 3) .. sEE .. sEL .. sER .. sET .. sES
+            EmtOutput( sOutPreMove)
+         end
+         sOutPreMove = 'G101' .. ' X' .. EmtLenToString( -SafeXRotAxes, 3) .. ' Z' .. EmtLenToString( MyZHome, 3) ..
+                                       ' B' .. EgtNumToString( EMT.R2, 3) .. ' C' .. EgtNumToString( EMT.R1, 3) .. sEE .. sEL .. sER .. sET .. sES
          EmtOutput( sOutPreMove)
          EmtOutput( 'G101 ET1001')
          EmtOutput( 'G101 ET2001')

Common_FAST.TPA.mlpe

@@ -658,11 +658,18 @@ function OnRapid()
             bHeadFirst = false
          end
       end
+
+      local bGoToHome = false
+      -- se gli assi rotanti cambiano parecchio, con motosega si va in parcheggio 
+      if EMT.PREVHEAD == 'H3' and EMT.HEAD == 'H3' and EMT.TCPOS == EMT.PREVTCPOS and ( abs( EMT.R2pp - EMT.R2) > 25 or abs( EMT.R1pp - EMT.R1) > 25)  then
+         bGoToHome = true
+      end
+   
       -- primo posizionamento
       local MyZHome = EgtGetAxisHomePos( 'Z')
       local bZmax = ( #EMT.AUXSTR > 0  or  EMT.TOOL ~= EMT.PREVTOOL  or EMT.L3 > -1)
       -- se avevo motosega, torno in zona sicura senza ruotare assi rotanti
-      if not EMT.LOAD and EMT.PREVHEAD == 'H3' and EMT.ST > BeamHeightForFixRot and EMT.FLAG2 == 1 then
+      if not EMT.LOAD and EMT.PREVHEAD == 'H3' and ( EMT.ST > BeamHeightForFixRot or bGoToHome) and EMT.FLAG2 == 1 then
          local sOutPreMove = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( MyZHome, EMT.DECMACRO) ..
                                  ' P4=' .. EgtNumToString( EMT.R2pp, EMT.DECMACRO) .. ' P5=' .. EgtNumToString( EMT.R1pp, EMT.DECMACRO) .. 
                                  ' P6=' .. EgtNumToString( EMT.PREVTCPOS, EMT.DECMACRO) .. ' P7=' .. EgtNumToString( EMT.PREVS, 0) ..
@@ -679,8 +686,21 @@ function OnRapid()
 
       -- se carico motosega, ruoto in zona sicura prima di approcciare la lavorazione
       if not EMT.LOAD and ( EMT.HEAD == 'H3' or ( bZmax and EMT.TTOTLEN > 200)) and 
-         ( EMT.ST > BeamHeightForFixRot or ( EMT.HEAD == 'H1' and EMT.TTOTLEN > 350)) and EMT.FLAG2 == 1 then
-         local sOutPreMove = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( MyZHome, EMT.DECMACRO) ..
+         ( EMT.ST > BeamHeightForFixRot or ( EMT.HEAD == 'H1' and EMT.TTOTLEN > 350) or bGoToHome) and EMT.FLAG2 == 1 then
+         local sOutPreMove
+         if EMT.HEAD == 'H3' and bGoToHome then
+            sOutPreMove = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( MyZHome, EMT.DECMACRO) ..
+                                 ' P4=' .. EgtNumToString( 0, EMT.DECMACRO) .. ' P5=' .. EgtNumToString( EMT.R1pp, EMT.DECMACRO) .. 
+                                 ' P6=' .. AdjustTcPos( false) .. ' P7=' .. EgtNumToString( EMT.S, 0) ..
+                                 ' P8=0' .. ' P9=0' .. ' P10=' .. EgtIf( bZmax, '3', '4')
+            EmtOutput( sOutPreMove)
+            sOutPreMove = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( MyZHome, EMT.DECMACRO) ..
+                                 ' P4=' .. EgtNumToString( 0, EMT.DECMACRO) .. ' P5=' .. EgtNumToString( EMT.R1, EMT.DECMACRO) .. 
+                                 ' P6=' .. AdjustTcPos( false) .. ' P7=' .. EgtNumToString( EMT.S, 0) ..
+                                 ' P8=0' .. ' P9=0' .. ' P10=' .. EgtIf( bZmax, '3', '4')
+            EmtOutput( sOutPreMove)
+         end
+         sOutPreMove = 'M101 P1=1' .. ' P2=' .. EmtLenToString( -SafeXRotAxes, EMT.DECMACRO) .. ' P3=' .. EmtLenToString( MyZHome, EMT.DECMACRO) ..
                                  ' P4=' .. EgtNumToString( EMT.R2, EMT.DECMACRO) .. ' P5=' .. EgtNumToString( EMT.R1, EMT.DECMACRO) .. 
                                  ' P6=' .. AdjustTcPos( false) .. ' P7=' .. EgtNumToString( EMT.S, 0) ..
                                  ' P8=0' .. ' P9=0' .. ' P10=' .. EgtIf( bZmax, '3', '4')

Common_FAST.mlpe

@@ -785,13 +785,25 @@ function OnSimulMoveStart()
    VerifyVStroke( EMT.A2)
    -- se inizio lavorazione
    if EMT.MCHFIRST then
+
+      local bGoToHome = false
+      -- se gli assi rotanti cambiano parecchio, con motosega si va in parcheggio 
+      if EMT.PREVHEAD == 'H3' and EMT.HEAD == 'H3' and EMT.TOOL == EMT.PREVTOOL and abs( EMT.R3p - EMT.R3) < 100 * GEO.EPS_SMALL and ( abs( EMT.R2p - EMT.R2) > 25 or abs( EMT.R1p - EMT.R1) > 25)  then
+         bGoToHome = true
+      end
+
       EgtOutText( '')
       EMT.MCHFIRST = false
       local bZmax = ( EMT.TOOL ~= EMT.PREVTOOL  or EMT.L3 > -1)
       -- con pezzi alti aggiorno gli assi rotanti prima di muovermi sopra il pezzo
-      if not EMT.LOAD and EMT.MOVE == 0 and ( EMT.HB > BeamHeightForFixRot or ( EMT.HEAD == 'H1' and EMT.TOTLEN > 350)) and EMT.FLAG2 == 1 then
-         -- se motosega mi muovo a X di sicurezza per ruotare
-         if ( EMT.HEAD == 'H3' or ( bZmax and EMT.TOTLEN > 200)) then
+      if not EMT.LOAD and EMT.MOVE == 0 and ( EMT.HB > BeamHeightForFixRot or ( EMT.HEAD == 'H1' and EMT.TOTLEN > 350) or bGoToHome) and EMT.FLAG2 == 1 then
+         -- se motosega mi muovo a X di sicurezza per ruotare, prima si raddrizza B e poi C in posizione
+         if EMT.HEAD == 'H3' and bGoToHome then
+            SimulMoveAxis( 'X', SafeXRotAxes, MCH_SIM_STEP.RAPID)
+            SimulMoveAxis( 'B', 0, MCH_SIM_STEP.COLLROT)
+            SimulMoveAxis( 'C', EMT.R1, MCH_SIM_STEP.COLLROT)
+            SimulMoveAxis( 'B', EMT.R2, MCH_SIM_STEP.COLLROT)
+         elseif ( EMT.HEAD == 'H3' or ( bZmax and EMT.TOTLEN > 200)) then
             SimulMoveAxes( 'X', SafeXRotAxes, MCH_SIM_STEP.RAPID, 'C', EMT.R1, MCH_SIM_STEP.COLLROT, 'B', EMT.R2, MCH_SIM_STEP.COLLROT)
          end
       end

Common_FAST.mlse

@@ -1642,7 +1642,9 @@ function SpecAdjustCarriages( vCmd, dTPosI, dYDeltaI, dVDeltaI, dTPosF, dYDeltaF
       --    * deve effettivamente spostarsi
       --    * non si arriva da gestione passo del pellegrino
       --    * se riesce a raggiungere la posizione con le corse a disposizione per come sono posizionate le morse attualmente
-      if ( dYDeltaI - dVDeltaF) + 10 * GEO.EPS_SMALL >= MyMinY - MaxV and abs( dVDeltaF - dVDeltaI) > 10 * GEO.EPS_SMALL and  not EMC.PILGRIMSTEP and
+      if ( dYDeltaI - dVDeltaF) + 10 * GEO.EPS_SMALL >= MyMinY - MaxV and
+         ( abs( dVDeltaF - dVDeltaI) > 10 * GEO.EPS_SMALL or not EMC.VDELTA) and
+         not EMC.PILGRIMSTEP and
          ( dVDeltaF - dVDeltaI > MinV - dVPosI + MyMinY - dYPosI) then
          table.insert( vCmd, { 0, 'Direct-V-Y'})
          -- se l'altra morsa non era in presa, vado a pinzare il pezzo
@@ -1747,7 +1749,9 @@ function SpecAdjustCarriages( vCmd, dTPosI, dYDeltaI, dVDeltaI, dTPosF, dYDeltaF
       --    * deve effettivamente spostarsi
       --    * non si arriva da gestione passo del pellegrino
       --    * se riesce a raggiungere la posizione con le corse a disposizione per come sono posizionate le morse attualmente
-      elseif ( dYDeltaF - dVDeltaI) + 10 * GEO.EPS_SMALL >= MyMinY - MaxV and abs( dYDeltaF - dYDeltaI) > 10 * GEO.EPS_SMALL and  not EMC.PILGRIMSTEP and
+      elseif ( dYDeltaF - dVDeltaI) + 10 * GEO.EPS_SMALL >= MyMinY - MaxV and 
+             ( abs( dYDeltaF - dYDeltaI) > 10 * GEO.EPS_SMALL or not EMC.YDELTA) and
+             not EMC.PILGRIMSTEP and
              ( dYDeltaF - dYDeltaI < MaxY - dYPosI + MaxV - dVPosI) then
          table.insert( vCmd, { 0, 'Direct-Y-V'})
          -- se l'altra morsa non era in presa, vado a pinzare il pezzo

UpdateLog.txt

@@ -1,5 +1,9 @@
            ==== Common_FAST Update Log ====
 
+Versione 2.7i1 (08/09/2025)
+- (SIM-GEN) Se lavorazione precedente e successiva con motosega e si cambiano assi rotanti, vado in parcheggio per ruotare. Ticket#1844
+- (SIM-GEN) Per NEWCLAMPING, corretto un caso di riposizionemento allo scarico dove la pinza V poteva andare in posizione direttamente, ma cercava di fare passo pellegrino. Ticket#2572
+
 Versione 2.7g1 (01/07/2025)
 - (GEN) Aggiunti parametri FMAXPINZE, MAXACC, MINACC configurabili da TS3. Ticket#2052
 

Version.lua

@@ -3,7 +3,7 @@
 
 local InfoCommon_STD_PP = {
    NAME = 'Common_FAST',            -- nome script PP standard
-   VERSION = '2.7g1',                 -- versione script
+   VERSION = '2.7i1',                 -- versione script
    MIN_MACH_VER_PP_COMMON = '2.5k1'   -- versione minima kernel
 }