Dopo separazione, in NUM_PLUS, si srive EH1 solo se macro G101, perchè altrimenti non è prevista

Common_FAST.NUM.mlpe

@@ -1532,7 +1532,10 @@ function MyAdjustLinearAxes()
 
    if EMT.REFLOC then
       local vtE
-      if EMT.HEAD ~= 'H3' then
+      -- su NUM aggregati non gestiti
+      if EMT.HEAD == 'H5' or EMT.HEAD == 'H6' or EMT.HEAD == 'H7' then
+         EmtSetLastError( 1211, "Aggregates not managed")
+      elseif EMT.HEAD ~= 'H3' then
          local Len = EMT.TLEN + EgtIf( EMT.HEAD == 'H1', MillOffs, abs( SawOffs))
          local LenRef = MillOffs
          vtE = Vector3d( EMT.EXTR) * Len - Z_AX() * LenRef
@@ -1647,7 +1650,7 @@ end
 
 ---------------------------------------------------------------------
 function GetET( sHead, sTcPos, dAxR3)
-   if sHead == 'H1' or sHead == 'H5' or sHead == 'H6' then
+   if sHead == 'H1' or sHead == 'H5' or sHead == 'H6' or sHead == 'H7' then
       return ' E'..sTcPos
    elseif sHead == 'H2' then
       return ' ET42'

Common_FAST.NUM_PLUS.mlpe

@@ -145,7 +145,11 @@ function OnToolData()
       local sPos = 'N2' .. tostring(nPos)
       local sOut = 'L11=' .. EmtLenToString( EMT.SMAX, 3) .. ' L12=' .. EmtLenToString( AngTr1Offs, 1)..' G76H9998.1'..sPos..sPos
       EmtOutput( sOut)
-   -- altro non previsto
+   -- emissione dati sega a catena
+   elseif EMT.HEAD == 'H7' then
+      local sOut = 'L11='..EgtNumToString( EMT.SMAX, 0)..' L12='..EmtLenToString( ( 154.5), 1)..' G76H9998.1N121N121'
+      EmtOutput( sOut)
+-- altro non previsto
    end
 end
 
@@ -489,7 +493,7 @@ function OnMachiningEnd()
    end
    for i = 1, #EMT.AUXSTR do
       local sOut = EMT.AUXSTR[i]
-      if EMT.AUXTYPE == 'S' then
+      if EMT.AUXTYPE == 'S' and sOut:find( 'G101 ') then
          sOut = sOut .. ' EH1'
       elseif EMT.AUXTYPE == 'U' and not EMT.CHY_ON and not sOut:find( 'ET') then
          sOut = sOut .. ' ET2'
@@ -693,7 +697,7 @@ function OnRapid()
       if EMT.HEAD == 'H3' then
          sEL = sEL..EmtLenToString( ( EMT.TDIST or ChSawLen), 3)
       -- se aggregato
-      elseif EMT.HEAD == 'H5' or EMT.HEAD == 'H6' then
+      elseif EMT.HEAD == 'H5' or EMT.HEAD == 'H6' or EMT.HEAD == 'H7' then
          sEL = sEL..EmtLenToString( AngTr1Offs, 3)
       -- se testa normale  ( H1 or H2)
       else
@@ -705,7 +709,7 @@ function OnRapid()
       if EMT.HEAD == 'H3' then
          sER = sER..EmtLenToString( EMT.TLEN, 3)
       -- se aggregato
-      elseif EMT.HEAD == 'H5' or EMT.HEAD == 'H6' then
+      elseif EMT.HEAD == 'H5' or EMT.HEAD == 'H6' or EMT.HEAD == 'H7' then
          sER = sER..EmtLenToString( EMT.TLEN + AngTr1Len, 3)
       -- se testa normale  ( H1 or H2)
       else
@@ -1017,7 +1021,7 @@ end
 ---------------------------------------------------------------------
 function OnArc()
    -- con aggregato non si possono fare archi. Deve essere tutto spezzato
-   if EMT.HEAD == 'H5' or EMT.HEAD == 'H6' then
+   if EMT.HEAD == 'H5' or EMT.HEAD == 'H6' or EMT.HEAD == 'H7' then
       EmtSetLastError( 1211, "With aggregate, the arcs must be splitted")
    end
 
@@ -1642,11 +1646,16 @@ function MyAdjustLinearAxes()
          local LenRef = MillOffs
          local vtAux = EgtGetCalcAuxDirFromAngles( EMT.R1, EMT.R2, EMT.R3)
          vtE = vtAux * LenAux - Z_AX() * LenRef
-      elseif  EMT.HEAD == 'H5' then
+      elseif  EMT.HEAD == 'H5'  or EMT.HEAD == 'H6' then
          local LenAux = AngTr1Offs + MillOffs
          local LenRef = MillOffs
          local vtAux = EgtGetCalcAuxDirFromAngles( EMT.R1, EMT.R2, EMT.R3)
          vtE = vtAux * LenAux - Z_AX() * LenRef
+      elseif  EMT.HEAD == 'H7' then
+         local LenAux = AngTrBHOffs + MillOffs
+         local LenRef = MillOffs
+         local vtAux = EgtGetCalcAuxDirFromAngles( EMT.R1, EMT.R2, EMT.R3)
+         vtE = vtAux * LenAux - Z_AX() * LenRef
       else
          EmtSetLastError( 1211, 'Head not allowed ' .. EMT.HEAD)
       end
@@ -1741,7 +1750,7 @@ end
 
 ---------------------------------------------------------------------
 function GetET( sHead, sTcPos, dAxR3)
-   if sHead == 'H1' or sHead == 'H5' or sHead == 'H6' then
+   if sHead == 'H1' or sHead == 'H5' or sHead == 'H6' or sHead == 'H7' then
       return ' E'..sTcPos
    elseif sHead == 'H2' then
       return ' ET42'

Common_FAST.TPA.mlpe

@@ -151,7 +151,12 @@ function OnToolData()
       local sOut = 'M992 P1=' .. EgtNumToString( nPos, 0) .. ' P2=' .. EmtLenToString( EMT.TLEN, 3) .. ' P3=' .. EmtLenToString( EMT.TDIAM, 3) ..
                    ' P4=' .. EmtLenToString( EMT.SMAX, 3) .. ' P5=' .. EmtLenToString( EMT.TTOTLEN, 3)
       ParkLine( sOut)
-   -- altro non previsto
+   -- emissione dati sega a catena
+   elseif EMT.HEAD == 'H7' then
+      local sOut = 'M992 P1=' .. EMT.TCPOS:gsub( 'T', '') .. ' P2=' .. EmtLenToString( EMT.TLEN, 3) .. ' P3=' .. EmtLenToString( EMT.TDIAM, 3) ..
+                   ' P4=' .. EmtLenToString( EMT.SMAX, 3) .. ' P5=' .. EmtLenToString( EMT.TTOTLEN, 3)
+      ParkLine( sOut)
+-- altro non previsto
    else
       EmtSetLastError( 1211, 'Head not allowed ' .. EMT.HEAD)
    end
@@ -1640,12 +1645,18 @@ function MyAdjustLinearAxes()
          local LenRef = MillOffs
          local vtAux = EgtGetCalcAuxDirFromAngles( EMT.R1, EMT.R2, EMT.R3)
          vtE = vtAux * LenAux - Z_AX() * LenRef
-      elseif  EMT.HEAD == 'H5' then
+      elseif  EMT.HEAD == 'H5' or EMT.HEAD == 'H6' then
          local Len = EMT.TLEN + AngTr1Len
          local LenAux = MillOffs + AngTr1Offs
          local LenRef = MillOffs
          local vtAux = EgtGetCalcAuxDirFromAngles( EMT.R1, EMT.R2)
          vtE = Vector3d( EMT.EXTR) * Len + vtAux * LenAux - Z_AX() * LenRef
+      elseif  EMT.HEAD == 'H7' then
+         local Len = EMT.TLEN + AngTrBHLen
+         local LenAux = MillOffs + AngTrBHOffs
+         local LenRef = MillOffs
+         local vtAux = EgtGetCalcAuxDirFromAngles( EMT.R1, EMT.R2)
+         vtE = Vector3d( EMT.EXTR) * Len + vtAux * LenAux - Z_AX() * LenRef
       else
          EmtSetLastError( 1211, 'Head not allowed ' .. EMT.HEAD)
       end
@@ -1682,6 +1693,8 @@ function AdjustToolKinematic()
       return EgtIf( EMT.EXIT == 1, '11', '12')
    elseif EMT.HEAD == 'H6' then
       return EgtIf( EMT.EXIT == 1, '21', '22')
+   elseif EMT.HEAD == 'H7' then
+      return '31'
    else
       EmtSetLastError( 1211, 'Head not allowed ' .. EMT.HEAD)
    end

Common_FAST.mlpe

@@ -105,6 +105,7 @@ function OnSimulStart()
    AddToCollisionCheck( 'B', 'COLLISION', EMT.COLLOBJ)
    AddToCollisionCheck( 'C', 'COLLISION', EMT.COLLOBJ)
    AddToCollisionCheck( 'H5', 'COLLISION', EMT.COLLOBJ)
+   AddToCollisionCheck( 'H6', 'COLLISION', EMT.COLLOBJ)
    AddToolToCollisionCheck( 'H2', 1, EMT.COLLOBJ)
    AddToolHolderToCollisionCheck( 'H2', 1, EMT.COLLOBJ)
    DumpCollisionCheck( EMT.COLLOBJ, 'Collision Objects :', 4)
@@ -180,7 +181,7 @@ function OnSimulDispositionStart()
       if sTool  and  nTlen < LONG_TOOL_MINLEN then
          EMT.TOOL_1 = sTool
       else
-         EMT.TOOL_1 = GetDefaultToolName() 
+         EMT.TOOL_1 = GetDefaultToolName()
       end
       EgtLoadTool( 'H1', 1, EMT.TOOL_1)
       EMT.TCPOS_1 = GetToolTcPos( EMT.TOOL_1)
@@ -190,7 +191,7 @@ function OnSimulDispositionStart()
       EMT.VMILL = {}
       if not EMT.SIM1ST and EgtGetInfo( EgtGetCurrMachGroup(), 'Vm', 'b') then
          local nLastOrd = GetPhaseOrd( EgtGetPhaseCount())
-         local nPartRawId = EgtGetFirstRawPart() 
+         local nPartRawId = EgtGetFirstRawPart()
          while nPartRawId do
             -- se è lo scarto finale tagliato a pezzi, esco
             local nRawOrd = EgtGetInfo( nPartRawId, 'ORD', 'i')
@@ -212,20 +213,24 @@ function OnSimulDispositionStart()
                end
             end
             -- determino la risoluzione dello Zmap
-            local dArea = b3Raw:getDimX() * b3Raw:getDimY() + b3Raw:getDimX() * b3Raw:getDimZ() + b3Raw:getDimY() * b3Raw:getDimZ()
             local dTol = 4.71
-            if dArea < CoeffVM * 0.15e6 then
-               dTol = 0.71
-            elseif dArea < CoeffVM * 0.3e6 then
-               dTol = 1.01
-            elseif dArea < CoeffVM * 0.6e6 then
-               dTol = 1.51
-            elseif dArea < CoeffVM * 1.2e6 then
-               dTol = 1.97
-            elseif dArea < CoeffVM * 2.4e6 then
-               dTol = 2.81
-            elseif dArea < CoeffVM * 4.8e6 then
-               dTol = 3.77
+            if EmtGetVMillStep then
+               dTol = EmtGetVMillStep( b3Raw:getDimX(), b3Raw:getDimY(), b3Raw:getDimZ(), 4.71)
+            else
+               local dArea = b3Raw:getDimX() * b3Raw:getDimY() + b3Raw:getDimX() * b3Raw:getDimZ() + b3Raw:getDimY() * b3Raw:getDimZ()
+               if dArea < 0.075e6 then
+                  dTol = 0.71
+               elseif dArea < 0.15e6 then
+                  dTol = 1.01
+               elseif dArea < 0.3e6 then
+                  dTol = 1.51
+               elseif dArea < 0.6e6 then
+                  dTol = 1.97
+               elseif dArea < 1.2e6 then
+                  dTol = 2.81
+               elseif dArea < 2.4e6 then
+                  dTol = 3.77
+               end
             end
             -- creo lo Zmap
             local VMillId = EgtVolZmapBox( nPartRawId, b3Raw:getMin(), b3Raw:getDimX(), b3Raw:getDimY(), b3Raw:getDimZ(), dTol, true, GDB_RT.GLOB)
@@ -511,6 +516,9 @@ function OnSimulToolSelect( dPosA)
             EgtSetAxisPos( 'C', EgtIf( BD.RIGHT_LOAD, 180, 0))
          end
          EgtSetAxisPos( 'B', 0)
+      -- se aggregato per fresa tipo blockhaus
+      elseif EMT.HEAD == 'H7' then
+         EgtSetAxisPos( 'C', EgtIf( BD.RIGHT_LOAD, 180, 0))
       end
       -- se punta lunga
       if EMT.TOTLEN > LONG_TOOL_MINLEN then
@@ -534,9 +542,9 @@ function OnSimulToolDeselect()
    -- se prossimo utensile non definito, è disposizione ed esco
    if EMT.NEXTTOOL == '' then return end
    -- se cambia uscita su rinvio non devo fare alcunché
-   if EMT.HEAD == 'H5' and EMT.NEXTHEAD == 'H5' then return end
+   if ( EMT.HEAD == 'H5' and EMT.NEXTHEAD == 'H5') or ( EMT.HEAD == 'H6' and EMT.NEXTHEAD == 'H6') then return end
    -- se sega a catena o rinvio o punta lunga o utensile di grosso diametro, devo cambiare
-   if EMT.HEAD == 'H3' or EMT.HEAD == 'H5' or ( EMT.HEAD == 'H1' and ( EMT.TOTLEN > LONG_TOOL_MINLEN or EMT.TOTDIAM > BIG_TOOL_DIAM)) then
+   if EMT.HEAD == 'H3' or EMT.HEAD == 'H5' or EMT.HEAD == 'H6' or EMT.HEAD == 'H7' or ( EMT.HEAD == 'H1' and ( EMT.TOTLEN > LONG_TOOL_MINLEN or EMT.TOTDIAM > BIG_TOOL_DIAM)) then
       EgtOutText( 'Tool change in progress...')
       -- movimento scarico sega a catena
       if EMT.HEAD == 'H3' then
@@ -552,9 +560,13 @@ function OnSimulToolDeselect()
          end
          SimulMoveAxis( 'X', 0, MCH_SIM_STEP.RAPID)
       -- movimento scarico rinvio
-      elseif EMT.HEAD == 'H5' then
+      elseif EMT.HEAD == 'H5' or EMT.HEAD == 'H6' then
          SimulMoveAxes( 'B', 0, MCH_SIM_STEP.COLLROT, 'C', -90, MCH_SIM_STEP.COLLROT)
          SimulMoveAxis( 'X', 0, MCH_SIM_STEP.RAPID)
+      -- movimento scarico aggregato BlockHaus
+      elseif EMT.HEAD == 'H7' then
+         SimulMoveAxis( 'X', 0, MCH_SIM_STEP.RAPID)
+         SimulMoveAxes( 'B', 90, MCH_SIM_STEP.COLLROT, 'C', -90, MCH_SIM_STEP.COLLROT)
       -- movimento scarico punta lunga su T111
       elseif EMT.TOTLEN > LONG_TOOL_MINLEN then
          -- se su cambio utensile T111
@@ -579,7 +591,7 @@ function OnSimulToolDeselect()
       EgtSetMode( EgtGetHeadId( EMT.HEAD), GDB_MD.HIDDEN)
       ShowToolInTcPos( EMT.TCPOS_1, true)
       -- movimento per carico utensile
-      if EMT.NEXTHEAD ~= 'H3' and EMT.NEXTHEAD ~= 'H5' then
+      if EMT.NEXTHEAD ~= 'H3' and EMT.NEXTHEAD ~= 'H5' and EMT.NEXTHEAD ~= 'H6' then
          SimulMoveAxes( 'B', 90, MCH_SIM_STEP.RAPROT, 'C', EgtIf( BD.RIGHT_LOAD, 90, -90), MCH_SIM_STEP.RAPROT)
       else
          SimulMoveAxes( 'B', 0, MCH_SIM_STEP.RAPROT, 'C', EgtIf( BD.RIGHT_LOAD, 90, -90), MCH_SIM_STEP.RAPROT)
@@ -605,7 +617,7 @@ function OnSimulToolDeselect()
          EgtPause( 100)
          ShowToolInTcPos( EMT.TCPOS_1, true)
          -- se segue sega a catena
-         if EMT.NEXTHEAD == 'H3' or EMT.NEXTHEAD == 'H5' then
+         if EMT.NEXTHEAD == 'H3' or EMT.NEXTHEAD == 'H5' or EMT.NEXTHEAD == 'H6' then
             -- se non lama, nascondo l'utensile corrente
             if EMT.HEAD ~= 'H2' then
                EgtSetStatus( EgtGetHeadId( EMT.HEAD), GDB_ST.OFF)
@@ -1121,18 +1133,19 @@ end
 ---------------------------------------------------------------------
 --   *** ESTIMATION T&L ***
 ---------------------------------------------------------------------
-local RAPID_X_FEED =  75000    -- mm/min
-local RAPID_Y_FEED = 100000    -- mm/min
-local RAPID_Z_FEED =  50000    -- mm/min
-local RAPID_C_FEED =  15000    -- deg/min
-local RAPID_B_FEED =  15000    -- deg/min
-local RAPID_MIN_T = 0.1        -- s
-local LOAD_T = 2               -- s
-local CHAR_ONE_MOVE_T = 1      -- s
-local ROTATION_T = 40          -- s
-local SPLIT_T = 6              -- s
-local UNLOAD_T = 4             -- s
-local FALL_T = 2               -- s
+local ESTIMATION_RAPID_COEFF = EstimationRapidMultiplier or 1
+local RAPID_X_FEED =  75000 / ESTIMATION_RAPID_COEFF    -- mm/min
+local RAPID_Y_FEED = 100000 / ESTIMATION_RAPID_COEFF    -- mm/min
+local RAPID_Z_FEED =  50000 / ESTIMATION_RAPID_COEFF    -- mm/min
+local RAPID_C_FEED =  15000 / ESTIMATION_RAPID_COEFF    -- deg/min
+local RAPID_B_FEED =  15000 / ESTIMATION_RAPID_COEFF    -- deg/min
+local RAPID_MIN_T = 0.1 * ESTIMATION_RAPID_COEFF       -- s
+local LOAD_T = 2  * ESTIMATION_RAPID_COEFF              -- s
+local CHAR_ONE_MOVE_T = 1  * ESTIMATION_RAPID_COEFF     -- s
+local ROTATION_T = 40  * ESTIMATION_RAPID_COEFF         -- s
+local SPLIT_T = 6  * ESTIMATION_RAPID_COEFF             -- s
+local UNLOAD_T = 4  * ESTIMATION_RAPID_COEFF            -- s
+local FALL_T = 2  * ESTIMATION_RAPID_COEFF              -- s
 
 ---------------------------------------------------------------------
 function OnEstimStart()

Common_FAST.mlse

@@ -33,9 +33,9 @@ local DeltaTol = DELTA_TOL_S
 local DELTA_SIC = 1
 local AGG_LOAD = 50
 local MIN_JOIN_VV = EgtClamp( MinJoinVV or 75, 60, 150)
-local MIN_JOIN_SS = EgtClamp( MinJoinSS or 100, 80, 200)
+local MIN_JOIN_SS = EgtClamp( MinJoinSS or 100, 80, 275)
 local MIN_JOIN_LS = EgtClamp( MinJoinLS or 290, 250, 400)
-local MIN_JOIN_SL = EgtClamp( MinJoinSL or 100, 80, 200)
+local MIN_JOIN_SL = EgtClamp( MinJoinSL or 100, 80, 400)
 local MIN_JOIN_LL = EgtClamp( MinJoinLL or 400, 300, 600)
 local MinJoin = MIN_JOIN_SS
 local MinOther = abs( MinY) + abs( MaxV) + MinJoin

UpdateLog.txt

@@ -1,5 +1,16 @@
            ==== Common_FAST Update Log ====
 
+Versione 2.7a3 (08/01/2024)
+- (GEN) Dopo separazione, in NUM_PLUS, si srive EH1 solo se macro G101, perchè altrimenti non è prevista. Ticket#2239
+
+Versione 2.7a2 (08/01/2024)
+- (MLDE-SIM) Aggiunta gestione FACOLTATIVA 'EstimationRapidMultiplier' in MLDE per regolare il tempo stimato. Se non presente in MLDE, default 1.
+- (SIM) Aggiunta gestione qualità VMILL da impostazioni macchina
+
+Versione 2.7a1 (07/01/2024)
+- (MLDE-SIM-GEN) Nuovo aggregato 90° (H7) per fresa tipo BlockHaus. Ticket#2142
+- (SIM-GEN) Aumentati limiti massimi di pinzaggio minimo
+
 Versione 2.6l1 (02/12/2024)
 - (SIM) Corretto movimento VMILL durante scarico pezzo piccolo a caduta
 - (SIM-GEN) Per decidere posizione parcheggio barra dopo separazione, si considera lunghezza coda del pezzo in lavoro per evitare collisioni. Ticket#2168

Version.lua

@@ -3,7 +3,7 @@
 
 local InfoCommon_STD_PP = {
    NAME = 'Common_FAST',            -- nome script PP standard
-   VERSION = '2.6l1',                 -- versione script
+   VERSION = '2.7a3',                 -- versione script
    MIN_MACH_VER_PP_COMMON = '2.5k1'   -- versione minima kernel
 }