3dPrinting :

- corretto collegamento fra ribs esterni che passa sotto il solido.
3dPrinting 2.5h1 :
2023-08-30 09:52:28 +02:00 · 2023-08-28 19:52:40 +02:00 · 2023-08-25 09:25:14 +02:00 · 2023-08-09 17:34:16 +02:00 · 2023-07-20 12:44:32 +02:00 · 2023-07-03 10:23:37 +02:00
48 changed files with 5634 additions and 3510 deletions
@@ -13,9 +13,9 @@
 /Debug64
 /Release64
 /ipch
-/bin
 /obj
 /.vs
-/Machinings
-/Materials
-
+/bin/*.lua
+/bin/*.ini
+/bin/LuaLibs/*.lua
+/bin/Images/*.png
@@ -2,96 +2,58 @@ variables:
 VERS_MAIN: '1.0'
 APP_NAME: '3dPrinting'
 NEW_REL: ''
- NET_SHARE_R: '\\10.74.82.201\EgwTech'
+ NET_SHARE_X: '\\10.74.82.201\EgwTech'
 NET_SHARE_Z: '\\10.74.82.201\Artifacts'
 NET_USERQ: 'steamw\egalware'

 #Note compilazione LUA:
-# lua53 -o 32\$FileName -s $FileName: -o = output, -s = NON include i debug symbols
+# lua54 -o bin\$FileName -s $FileName: -o = output, -s = NON include i debug symbols

-# helper compilazione LUA a 32 bit
-.LuaCompile32: &LuaCompile32
+# helper compilazione LUA a 32 e 64 bit
+.LuaCompile: &LuaCompile
  - |
-    Set-Alias lua53  C:\Tools\Lua32\luac53
-    echo "Copia file *.ini"
-    $FileList = Get-ChildItem("*.ini")
-    ForEach ($File in $FileList) {
-      $FileName = Split-Path $File -leaf
-      Copy-Item -Path $FileName -Destination 32\$FileName
-      echo "Copy-Item -Path $FileName -Destination 32\$FileName"
-    }
-    echo "Copia file *.lua"
+    Set-Alias lua54  C:\Tools\Lua32\luac54
    $FileList = Get-ChildItem("*.lua")
    ForEach ($File in $FileList) {
      $FileName = Split-Path $File -leaf
-      Copy-Item -Path $FileName -Destination 32\$FileName
-      echo "Copy-Item -Path $FileName -Destination 32\$FileName"
+      lua54 -o bin\$FileName $FileName
+      echo "lua54 -o bin\$FileName $FileName"
    }
    $FileList = Get-ChildItem("LuaLibs\*.lua")
    ForEach ($File in $FileList) {
      $FileName = Split-Path $File -leaf
-      lua53 -o 32\LuaLibs\$FileName LuaLibs\$FileName
-      echo "lua53 -o 32\LuaLibs\$FileName LuaLibs\$FileName"
+      lua54 -o bin\LuaLibs\$FileName LuaLibs\$FileName
+      echo "lua54 -o bin\LuaLibs\$FileName LuaLibs\$FileName"
    }

-# helper compilazione LUA a 64 bit
-.LuaCompile64: &LuaCompile64
-  - |
-    Set-Alias lua53  C:\Tools\Lua64\luac53
-    echo "Copia file *.ini"
-    $FileList = Get-ChildItem("*.ini")
-    ForEach ($File in $FileList) {
-      $FileName = Split-Path $File -leaf
-      Copy-Item -Path $FileName -Destination 64\$FileName
-      echo "Copy-Item -Path $FileName -Destination 64\$FileName"
-    }
-    echo "Copia file *.lua"
-    $FileList = Get-ChildItem("*.lua")
-    ForEach ($File in $FileList) {
-      $FileName = Split-Path $File -leaf
-      Copy-Item -Path $FileName -Destination 64\$FileName
-      echo "Copy-Item -Path $FileName -Destination 64\$FileName"
-    }
-    $FileList = Get-ChildItem("LuaLibs\*.lua")
-    ForEach ($File in $FileList) {
-      $FileName = Split-Path $File -leaf
-      lua53 -o 64\LuaLibs\$FileName LuaLibs\$FileName
-      echo "lua53 -o 64\LuaLibs\$FileName LuaLibs\$FileName"
-    }
-
-#      Copy-Item -Path $FileName -Destination 64\$FileName
-#      echo "Copy-Item -Path $FileName -Destination 64\$FileName"
 # helper copia SORGENTI verso cartella di rete R:\ dei SORGENTI
 .CodeReplicaR: &CodeReplicaR
  - |
-    net use R: /delete
-    net use R: $env:NET_SHARE_R /u:$env:NET_USERQ $ZDRIVE_PASSWD
-    ROBOCOPY . R:\EgtData\$env:APP_NAME /MIR /XF .git* /XD .git
+    net use X: /delete
    SLEEP 2
-    net use R: /delete
+    net use X: $env:NET_SHARE_X /u:$env:NET_USERQ $ZDRIVE_PASSWD 
+    ROBOCOPY . X:\EgtData\$env:APP_NAME\ /MIR /XF .git* /XD .git
+    SLEEP 2
+    net use X: /delete


-# helper copia script verso cartella di rete R:\ delle cartelle 32 e 64
+# helper copia script verso cartella di rete R:\ delle cartelle bin
 .ReplicaR: &ReplicaR
  - |
-    net use R: /delete
-    net use R: $env:NET_SHARE_R /u:$env:NET_USERQ $ZDRIVE_PASSWD
-    ROBOCOPY /MIR 32 R:\EgtData\$env:APP_NAME\32
-    ROBOCOPY /MIR 64 R:\EgtData\$env:APP_NAME\64
-    ROBOCOPY /MIR Images R:\EgtData\$env:APP_NAME\32\Images
-    ROBOCOPY /MIR Images R:\EgtData\$env:APP_NAME\64\Images
+    net use X: /delete
    SLEEP 2
-    net use R: /delete
+    net use X: $env:NET_SHARE_X /u:$env:NET_USERQ $ZDRIVE_PASSWD 
+    ROBOCOPY /MIR bin X:\EgtData\$env:APP_NAME\bin
+    SLEEP 2
+    net use X: /delete

-# helper copia script verso cartella di rete R:\ delle cartelle 32 e 64
+# helper copia script verso cartella di rete Z:\ delle cartelle bin
 .ReplicaZ: &ReplicaZ
  - |
    net use Z: /delete
+    SLEEP 2
    net use Z: $env:NET_SHARE_Z /u:$env:NET_USERQ $ZDRIVE_PASSWD
-    ROBOCOPY /MIR 32 Z:\EgtData\$env:APP_NAME\32
-    ROBOCOPY /MIR 64 Z:\EgtData\$env:APP_NAME\64
-    ROBOCOPY /MIR Images Z:\EgtData\$env:APP_NAME\32\Images
-    ROBOCOPY /MIR Images Z:\EgtData\$env:APP_NAME\64\Images
+    ROBOCOPY /MIR bin Z:\EgtData\$env:APP_NAME\bin
    SLEEP 2
    net use Z: /delete

@@ -103,12 +65,11 @@ LuaCompile:build:
 only:
   - main
   - master
+   - develop
 tags:
   - win
 script:    
-   - *LuaCompile32
-   - *LuaCompile64
+   - *LuaCompile
   - *CodeReplicaR
   - *ReplicaR
-   - *ReplicaZ
-   
+#   - *ReplicaZ
@@ -1,16 +0,0 @@
-[3dPrinting]
-Enable=1
-BaseDir=C:\EgtData\3dPrinting
-Button1=PartPositioning.lua,Images\PartPositioning.png,Disponi pezzo sulla tavola macchina
-Button2=Slicing.lua,Images\Slicing.png,Calcola lo slicing, i solidi e i percorsi utensile
-Button3=MachiningParamCalc.lua,Images\MachiningParamCalc.png,Calcola parametri di lavorazione (Tempo layer, F, S)
-Button4=GcodeGenerate.lua,Images\GcodeGenerate.png,Genera codice CN
-Button5=ShowManager.lua,Images\ShowManager.png,Gestore visualizzazione
-Button6=ViewManager.lua,Images\ViewManager.png,Nascondi Visualizza strato
-Button7=SliceAdvancement.lua,Images\SliceAdvancement.png,Mostra avanzamento strato
-Button8=SlicePalette.lua,Images\SlicePalette.png,Gestore colori strato
-Button9=MachiningParamEdit.lua,Images\MachiningParamEdit.png,Edita i parametri di stampa
-Button10=MaterialParamEdit.lua,Images\MaterialParamEdit.png,Edita i parametri del materiale
-ParamFile=C:\EgtData\3dPrinting\Machinings\Params.ini
-ResultReadProg="C:\Program Files\Microsoft Office\root\Office16\EXCEL.EXE"
-MachiningEditProg="C:\Windows\System32\notepad.exe"
@@ -1,4 +1,4 @@
-- CalcMachParamFromSW.lua by Egaltech s.r.l. 2022/09/15
+-- CalcMachParamFromSW.lua by Egaltech s.r.l. 2023/01/11
 -- Calcolo dei parametri di stampa

 -- Intestazioni
@@ -7,8 +7,7 @@ _ENV = EgtProtectGlobal()
 EgtEnableDebug( false)

 -- Imposto direttorio libreria specializzata per Stampa 3d
-local sBaseDir = EgtGetSourceDir()
-EgtAddToPackagePath( sBaseDir .. 'LuaLibs\\?.lua')
+EgtAddToPackagePath( PRINT.BASEDIR .. '\\LuaLibs\\?.lua')

 -- Librerie
 _G.package.loaded.RunMachParamFromSWCalc = nil
@@ -1,4 +1,4 @@
-- CalcSolids.lua by Egaltech s.r.l. 2022/09/26
+-- CalcSolids.lua by Egaltech s.r.l. 2023/01/11
 -- Calcola i solidi a partire dallo slicing

 -- Intestazioni
@@ -7,8 +7,7 @@ _ENV = EgtProtectGlobal()
 EgtEnableDebug( false)

 -- Imposto direttorio libreria specializzata per Stampa 3d
-local sBaseDir = EgtGetSourceDir()
-EgtAddToPackagePath( sBaseDir .. 'LuaLibs\\?.lua')
+EgtAddToPackagePath( PRINT.BASEDIR .. '\\LuaLibs\\?.lua')

 -- Librerie
 _G.package.loaded.RunCalcSolids = nil
@@ -0,0 +1,19 @@
+
+REM Compilazione degli script 3dPrinting Egaltech                         2023.01.11
+REM Per togliere info di debug aggiungere flag -s prima del nome del file di input
+
+REM Compilazione 32 e 64 bit
+
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\AddManData.lua                    LuaLibs\AddManData.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\CalcPaths.lua                     LuaLibs\CalcPaths.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\CalcSlices.lua                    LuaLibs\CalcSlices.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\CalcToolPath.lua                  LuaLibs\CalcToolPath.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\RunCalcSolids.lua                 LuaLibs\RunCalcSolids.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\RunGcodeGenerate.lua              LuaLibs\RunGcodeGenerate.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\RunMachParamFromSWCalc.lua        LuaLibs\RunMachParamFromSWCalc.lua
+\EgtProg\Dll32\luac54 -o bin\LuaLibs\RunSlicing.lua                    LuaLibs\RunSlicing.lua
+\EgtProg\Dll32\luac54 -o bin\CalcMachParamFromSW.lua                   CalcMachParamFromSW.lua
+\EgtProg\Dll32\luac54 -o bin\CalcSolids.lua                            CalcSolids.lua
+\EgtProg\Dll32\luac54 -o bin\GcodeGenerate.lua                         GcodeGenerate.lua
+\EgtProg\Dll32\luac54 -o bin\Slicing.lua                               Slicing.lua
+\EgtProg\Dll32\luac54 -o bin\Version.lua                               Version.lua
@@ -1,4 +1,4 @@
-- GcodeGenerate.lua by Egaltech s.r.l. 2022/04/11
+-- GcodeGenerate.lua by Egaltech s.r.l. 2023/01/11
 -- Calcoli prima fase per Stampa 3d

 -- Intestazioni
@@ -7,8 +7,7 @@ _ENV = EgtProtectGlobal()
 EgtEnableDebug( false)

 -- Imposto direttorio libreria specializzata per Stampa 3d
-local sBaseDir = EgtGetSourceDir()
-EgtAddToPackagePath( sBaseDir .. 'LuaLibs\\?.lua')
+EgtAddToPackagePath( PRINT.BASEDIR .. '\\LuaLibs\\?.lua')

 -- Librerie
 _G.package.loaded.RunGcodeGenerate = nil
@@ -24,36 +24,39 @@ COASTING_CRV = "Coasting"
 WIPE_CRV = "Wipe"
 LEAD_IN_CRV = "LeadIn"
 LEAD_OUT_CRV = "LeadOut"
+LINK_CRV = "Link"
 FRAME_PART = "FramePart"
 START_GEOM = "Start"
 TOT_SHELL_TRIM_SURF = "TotalShellSurfForTrim"
+TRIM_SURF_LOOP = "TrimSurfLoop"
+SURF_LOOP = "SurfLoop"

 MIN_LEN = 0.1
 MIN_AREA = 0.01
 MIN_RIBS_LEN = 2
+MIN_INFILL_LEN = 2

 -- Parametri di lavorazione
 SEC_DEFAULT = "Default"
 KEY_PARAMS = "Params"
 KEY_CALC_SOLIDS = "CalcSolids"
-KEY_SLICING_45 = "Slicing45"
-KEY_SLICING_DIR="SlicingDir"
+KEY_SPIRAL_VASE = "SpiralVase"
+KEY_SLICING_TYPE = "SlicingType"
+KEY_SLICING_DIR = "SlicingDir"
 KEY_SLICE_STEP = "StrandH"
 KEY_SHELLS_NBR = "StrandCount"
 KEY_STRAND = "StrandW"
+KEY_INNER_STRAND = "InnerStrandW"
 KEY_STRAND_OVERLAP = "StrandOverlap"
-KEY_OFFSET_SLICE ="Offset"
+KEY_OFFSET_SLICE = "Offset"
 KEY_SP_OFFSET_ON_SLICE = "StartPointOffsetOnSlice"
-KEY_PRINT_ORDER = "StrandOrder"
+KEY_STRAND_ORDER = "StrandOrder"
+KEY_PRINT_ORDER = "PrintOrder"
 KEY_PRINT_DIRECTION = "Direction"
 KEY_TYPE = "Type"
 KEY_LINK_TYPE = "LinkType"
 KEY_LINK_PARAM = "LinkParam"
 KEY_LINK_ZUP = "LinkZup"
-KEY_FLOOR_NBR = "FloorCount"
-KEY_FLOOR_TYPE = "FloorType"
-KEY_CEIL_NBR = "CeilCount"
-KEY_CEIL_TYPE = "CeilType"
 KEY_SPEED = "Speed"
 KEY_FEED = "Feed"
 KEY_EXT_FEED = "ExtFeed"
@@ -74,10 +77,35 @@ KEY_OFFSET_LEAD_POINT = "OffsetLeadPoint"
 KEY_COASTING_LEN = "CoastingLen"
 KEY_COASTING_FEED = "CoastingFeed"
 KEY_WIPE_LEN = "WipeLen"
+KEY_WIPE_DIR = "WipeDir"
 KEY_WIPE_FEEDPU = "WipeFeedPu"
-KEY_TOOL_DIAM = "ToolDiam" 
+KEY_TOOL_DIAM = "ToolDiam"
+
+-- Solid Fill
+KEY_FLOOR_NBR = "FloorCount"
+KEY_FLOOR_TYPE = "FloorType"
+KEY_CEIL_NBR = "CeilCount"
+KEY_CEIL_TYPE = "CeilType"
+KEY_FILL_TYPE = "FillType"
+
+-- Infill
+KEY_INFILL_STRAND = "InfillStrandW"
+KEY_INFILL_TYPE = "InfillType"
+KEY_INFILL_DENSITY = "InfillDensity"
+KEY_INFILL_LINK = "InfillLink"
+KEY_INFILL_OVERLAP = "InfillOverlap"
+KEY_INFILL_GRID_OVERLAP = "InfillGridOverlap"
+KEY_INFILL_DIR = "InfillDirection"
+KEY_INFILL_OFFSET_X = "InfillOffsetX"
+KEY_INFILL_OFFSET_Y = "InfillOffsetY"
+KEY_INFILL_COASTING = "InfillCoasting"
+KEY_INFILL_WIPE = "InfillWipe"
+KEY_INFILL_WIPE_DIR = "InfillWipeDir"

 -- Ribs
+KEY_RIBS_STRAND = "RibsStrandW"
+KEY_RIBS_TYPE = "RibsType"
+KEY_LIMIT_UNBDD_RIBS = "LimitUnboundedRibsWithSolid"
 KEY_RIBS_OVERLAP = "RibsOverlap"
 KEY_RIBS_SHELLS_NBR = "RibsStrandCount"
 KEY_RIBS_LINK = "RibsLink"
@@ -91,22 +119,47 @@ KEY_RIBS_LEAD_OUT_COASTING = "RibsLeadOutCoasting"
 KEY_RIBS_LEAD_OUT_WIPE = "RibsLeadOutWipe"
 KEY_RIBS_LEAD_OUT_WIPE_DIR = "RibsLeadOutWipeDir"
 KEY_RIBS_INTERS = "RibsHaveIntersections"
-KEY_SPLIT_RIB = "SplitRib"
-KEY_RIBS_TWO_STRANDS = "RibsHaveAll2Strands"
+KEY_RIBS_SPECIAL_CASE = "RibsSpecialCase"
+KEY_SPLIT_ORDER = "SplitOrder"
+KEY_SPLIT_AFTER_TRIM = "RibsSplitAfterTrim"
+KEY_SPLIT_AFTER_TRIM_ORDER = "RibsSplitAfterTrimOrder"
+KEY_SPLIT_AFTER_TRIM_TOT = "RibsSplitAfterTrimTot"
+KEY_SPLIT_ID = "SplitId"
+KEY_START_RIB = "StartRib"
+KEY_ORIGINAL_RIB = "OriginalRib"
+KEY_LOOP_RIB = "LoopRib"
+KEY_RIBS_USER_LINK = "RibWithUserLink"
+KEY_RIBS_USER_LINK_SAME_SIDE = "RibUserLinkOnSameSide"
+KEY_RIBS_USER_LINK_CCW = "RibUserLinkCCW"
+KEY_RIBS_USER_LINK_ORDER = "RibUserLinkOrder"
+KEY_RIBS_USER_LINK_TOT = "RibsUserLinkParts"
+KEY_RIBS_INVERT_STRAND_ORDER = "RibsInvertStrandOrder"

 -- Regioni con diverso numero di passate
 KEY_SHELL_NBR_DIFF = "ShellNbrDifference"
 KEY_SHELL_NBR_COASTING = "ShellNbrCoasting"
 KEY_SHELL_NBR_WIPE = "ShellNbrWipe"
 KEY_SHELL_NBR_WIPE_DIR = "ShellNbrWipeDir"
+KEY_EXTRA_SHELL_COASTING = "ExtraShellCoasting"
+KEY_EXTRA_SHELL_WIPE = "ExtraShellWipe"
+KEY_EXTRA_SHELL_WIPE_DIR = "ExtraShellWipeDir"

 -- Solidi ausiliari
+KEY_AUX_SOLIDS_STRAND = "AuxSolidsStrandW"
+KEY_AUX_SOLIDS_SHELLS_NBR = "AuxSolidsStrandCount"
+KEY_AUX_SOLIDS_OVERLAP = "AuxSolidsOverlap"
 KEY_AUX_SOLIDS_INFILL = "AuxSolidsInfill"
 KEY_AUX_SOLIDS_PRINT_ORDER = "AuxSolidsStrandOrder"
-KEY_AUX_SOLIDS_OVERLAP = "AuxSolidsOverlap"
 KEY_AUX_SOLIDS_LINK_TYPE = "AuxSolidsLinkType"
-KEY_AUX_SOLIDS_SP_OFFSET = "AuxSolidsStartPointOffsetOnSlice"
 KEY_AUX_SOLIDS_LINK_PARAM = "AuxSolidsLinkParam"
+KEY_AUX_SOLIDS_SP_OFFSET = "AuxSolidsStartPointOffsetOnSlice"
+KEY_AUX_SOLIDS_LP_OFFSET = "AuxSolidsOffsetLeadPoint"
+KEY_AUX_SOLIDS_INFILL_LINK = "AuxSolidsInfillLink"
+KEY_AUX_SOLIDS_DENSITY = "AuxSolidsDensity"
+KEY_AUX_SOLIDS_DIR = "AuxSolidsDirection"
+KEY_AUX_SOLIDS_OFFSET_X = "AuxSolidsOffsetX"
+KEY_AUX_SOLIDS_OFFSET_Y = "AuxSolidsOffsetY"
+KEY_AUX_SOLIDS_GRID_OVERLAP = "AuxSolidsGridOverlap"
 KEY_AUX_SOLIDS_COASTING_LEN = "AuxSolidsCoastingLen"
 KEY_AUX_SOLIDS_WIPE_LEN = "AuxSolidsWipeLen"
 KEY_AUX_SOLIDS_WIPE_DIR = "AuxSolidsWipeDir"
@@ -119,6 +172,7 @@ KEY_SPEED_MIN = "SpeedMin"
 KEY_SPEED_MAX = "SpeedMax"

 -- Altre chiavi
+KEY_MAX_H = "SlicingHeight"
 KEY_SLICE_NBR = "SliceNbr"
 KEY_SLICE_Z = "SliceZ"
 KEY_SLICE_DELTAZ = "DeltaZ"
@@ -128,7 +182,27 @@ KEY_ZIG_ZAG_DIR = "ZigZagDir"
 KEY_INVERTED_CRV = "InvertedCrv"
 KEY_CLOSED_CRV = "ClosedCrv"
 KEY_ASSOCIATED_SURF = "AssociatedSurf"
+KEY_ASSOCIATED_CRVS = "AssociatedCrvs"
+KEY_ORIGINAL_SURF = "OriginalSurf"
 KEY_HAS_SOLIDS = "Solids"
+KEY_BOX_MIN_Z = "PartBoxMinZ"
+KEY_ORIGINAL_START_POINT = "OriginalStartPoint"
+KEY_FIRST_SOLID_LAY = "FirstSolidLay"
+KEY_LAST_SOLID_LAY = "LastSolidLay"
+KEY_ASSOCIATED_TP_CRV = "AssociatedToolPathCrv"
+KEY_ASSOCIATED_P_CRV = "AssociatedPathCrv"
+KEY_INTERNAL_SRF_LOOP = "InternalSrfLoop"
+KEY_PREV_CRV = "PrevCrv"
+KEY_NEXT_CRVS = "NextCrvs"
+KEY_CRV_STRAND = "CurveStrand"
+KEY_LAYER_CNT = "LayerCnt"
+
+SLICING_TYPE = {
+   VERTICAL = 1,
+   DEG45_X = 2,
+   DEG45_Y = 3,
+   HORIZONTAL = 4,
+}

 TYPE = {
   OUTER_SHELL = 1,
@@ -143,9 +217,20 @@ TYPE = {
   AUX_SOLID = 10,
 }

+PRINT_ELEMENT = {
+   SHELL = 1,
+   EXTRA_SHELL = 2,
+   INFILL = 3,
+   AUX_SOLID = 4,
+   RIB_UNBOUNDED = 5,
+   RIB_EXTERNAL = 6,
+   RIB_INTERNAL = 7,
+   RIB_SUPPORT = 8,
+}
+
 PRINT_ORDER = {
-   EXT_INT_INF = 1,
-   INF_INT_EXT = 2,
+   EXT_INT = 1,
+   INT_EXT = 2,
 }

 PRINT_DIRECTION = {
@@ -156,7 +241,7 @@ PRINT_DIRECTION = {
 LINK_TYPE = {
   NONE = 1,
   LINEAR = 2,
-   BIARC = 3,   
+   BIARC = 3,
 }

 LEAD_TYPE = {
@@ -165,10 +250,28 @@ LEAD_TYPE = {
   ARC = 3,
 }

-INFILL_TYPE = {
-   NONE = 1,
-   OFFSET = 2,
-   ZIGZAG = 3,
+FILL_CATEGORY = {
+   NONE = 0,
+   SOLID_FILL = 16,
+   INFILL = 32,
+}
+
+FILL_TYPE = {
+   NONE = 0,
+   OFFSET = 16,
+   ZIGZAG = 17,
+   LINES = 32,
+   GRID = 33,
+   ZIG_ZAG_GRID = 34,
+   HONEYCOMB = 35,
+   HONEYCOMB_GRID = 36,
+}
+
+RIB_TYPE = {
+   INTERNAL = 1,
+   EXTERNAL = 2,
+   UNBOUNDED = 3,
+   SUPPORT = 4,
 }

 ---------------------------------------------------------------------
@@ -198,6 +301,7 @@ KEY_SLICE_ADV_MODE = 'SliceAdvMode'
 KEY_SLICE_ADV_PERC = 'SliceAdvPerc'

 KEY_MOVED_PART ='MovedPart'
+KEY_MOVED_PART2 ='MovedPart2'

 RESULT = {
   OK = 1,
@@ -232,15 +336,21 @@ SLICE_ADV_TYPE = {
 ---------------------------------------------------------------------
 RIBS_GRP = "Ribs"
 RIBS_CRV = "Rib"
+RIBS_LOOP_GRP = "RibsLoops"

 SHELL_NBR_GRP = "ShellNbrRegions"
 SHELL_NBR_CRV = "ShellNbrRegion"
 SHELL_NBR_SURF = "ShellNbrSurf"

 AUX_SOLIDS_GRP = "AuxSolids"
+AUX_SOLIDS_INFILL_GRP = "InfillAuxSolids"
 AUX_SOLIDS_CRV = "AuxSolid"
+AUX_SOLIDS_INFILL_CRV = "InfillAuxSolid"
 AUX_SOLIDS_SRF = "SrfAuxSolid"

+INFILL_GRP = "Infill"
+INFILL_CRV = "InfillCrv"
+
 ---------------------------------------------------------------------
 -- parametri calcolo tempi, F ed S
 LAY_TFSCALC = "TFSCalc"
@@ -255,6 +365,8 @@ KEY_FCUR = "FCur"
 KEY_LENGTH = "Length"
 KEY_SLICEID = "SliceId"
 KEY_MASS = "PrintMass"
+KEY_MF = "MF"
+KEY_TOTAREA = "TotArea"

 ---------------------------------------------------------------------
 return AddManData
@@ -1,75 +0,0 @@
-- CalcPaths.lua by Egaltech s.r.l. 2022/03/30
-- Calcolo percorsi di lavoro per Stampa 3d
-
-- Tabella per definizione modulo
-local CSVManager = {}
-
-- Intestazioni
-require( 'EgtBase')
-
-EgtOutLog( ' CSVManager started', 1)
-
-- Dati
-local AMD = require( 'AddManData')
-
---------------------------------------------------------------------
-function toCSV (t)
-   local s = ""
-   for _,p in pairs(t) do
-      s = s .. "," .. escapeCSV(p)
-   end
-   return string.sub(s, 2)      -- remove first comma
-end
-
---------------------------------------------------------------------
-function escapeCSV (s)
-   if string.find(s, '[,"]') then
-      ns = '"' .. string.gsub(s, '"', '""') .. '"'
-   end
-   return s
-end
-
---------------------------------------------------------------------
-local function fromCSV(s)
-   s = s .. ';'        -- ending comma
-   local t = {}        -- table to collect fields
-   local fieldstart = 1
-   repeat
-      -- next field is quoted? (start with `"'?)
-      if string.find(s, '^"', fieldstart) then
-         local a, c
-         local i  = fieldstart
-         repeat
-         -- find closing quote
-         a, i, c = string.find(s, '"("?)', i+1)
-         until c ~= '"'    -- quote not followed by quote?
-         if not i then error('unmatched "') end
-         local f = string.sub(s, fieldstart+1, i-1)
-         table.insert(t, (string.gsub(f, '""', '"')))
-         fieldstart = string.find(s, ';', i) + 1
-      else                -- unquoted; find next comma
-         local nexti = string.find(s, ';', fieldstart)
-         table.insert(t, string.sub(s, fieldstart, nexti-1))
-         fieldstart = nexti + 1
-      end
-   until fieldstart > string.len(s)
-   return t
-end
-
---------------------------------------------------------------------
-function read_file( path)
-    local file = io.open( path, "r") -- r read mode and b binary mode
-    if not file then return nil end
-    local CSVTable = {}
-
-    for line in io.lines( path) do
-       CSVTable[#CSVTable + 1] = fromCSV( line)
-    end
-
-    file:close()
-
-    return CSVTable
-end
-
---------------------------------------------------------------------
-return CSVManager
@@ -1,4 +1,4 @@
-- RunCalcSolids.lua by Egaltech s.r.l. 2022/07/01
+-- RunCalcSolids.lua by Egaltech s.r.l. 2022/11/02
 -- Calcolo percorsi di lavoro per Stampa 3d

 -- Tabella per definizione modulo
@@ -12,13 +12,14 @@ EgtOutLog( ' RunCalcSolids started', 1)
 -- Dati
 local AMD = require( 'AddManData')

+--------------------------------------------------------------------
+local s_dTol = 0.1
+
 ---------------------------------------------------------------------
 local function GetLayerParamsForSolidCalc( nPartId)
-   local LayerParams = {}     
-   LayerParams.bInvert = EgtGetInfo( nPartId, KEY_PRINT_DIRECTION, 'b')
+   local LayerParams = {}
+   LayerParams.bSpiralVase = EgtGetInfo( nPartId, KEY_SPIRAL_VASE, 'b') or false
   LayerParams.dLayHeight = EgtGetInfo( nPartId, KEY_SLICE_STEP, 'd')
-   LayerParams.dStrand = EgtGetInfo( nPartId, KEY_STRAND, 'd')
-   LayerParams.nOrder = EgtGetInfo( nPartId, KEY_PRINT_ORDER, 'i')
   LayerParams.vtSlicing = EgtGetInfo( nPartId, KEY_SLICING_DIR, 'v')
   return LayerParams
 end
@@ -28,22 +29,6 @@ local function CalcSectionParams( dStrand, dH)
   local dL = dStrand
   local dLm = dStrand / 10
   local dHm = dH / 6
-   -- recupero offset
-   --local dOffs = EgtGetInfo( s_nPartId, KEY_OFFSET_SLICE, 'd')
-   dOffs = 0
-   if dOffs and dOffs > 0 then
-      -- calcolo area originale
-      local dArea = ( dL * dH) - ( dLm * dHm)
-      local dLM = ( dArea / dH) - ( dLm / 6)
-      if dOffs / 2 <= ( dL - dLM) then
-         dL = dL - dOffs / 2
-         dLm = dL / 10
-         dHm = (( dL * dH) - dArea) / dLm
-      else
-         EgtOutLog( 'Strand section not calculated on area. Too much overlap?')
-      end
-   end
-
   local dD1 = 0.5 * dL - dLm
   local dD2 = 0.5 * dL - dD1 
   local dD3 = dHm
@@ -63,8 +48,8 @@ local function CreateSection( ptS, vtDir, dStrand, dH, vtSlicing, nSolidGrp)
   local ptF = ptC - 2 * ( dD1 + dD2) * vtDir
   local ptG = ptB - 2 * ( dD1 + dD2) * vtDir
   local ptH = ptA - 2 * dD1 * vtDir 
-
-   local nId = EgtCurveCompoFromPoints( nSolidGrp, {ptA, ptB, ptC, ptD, ptE, ptF, ptG, ptH, ptA})
+   
+   local nId = EgtCurveCompoFromPoints( nSolidGrp, {ptA, ptB, ptC, ptD, ptE, ptF, ptG, ptH, ptA}, GDB_RT.GLOB)
   EgtInvertCurve( nId)
   
   return nId 
@@ -79,46 +64,134 @@ local function CreateHalfSection( ptS, vtDir, dStrand, dH, vtSlicing, nSolidGrp)
   local ptC = ptB + dD4 * vtSlicing
   local ptD = ptA + dH * vtSlicing
 
-   local nId = EgtCurveCompoFromPoints( nSolidGrp, { ptS - dH * vtSlicing, ptA, ptB, ptC, ptD, ptS})
+   local nId = EgtCurveCompoFromPoints( nSolidGrp, { ptS - dH * vtSlicing, ptA, ptB, ptC, ptD, ptS}, GDB_RT.GLOB)
   
   return nId
 end

--------------------------------------------------------------------
-local function CreateSolid( nCrvId, nSolidGrp, dStrand, dH, vtSlicing)
-   -- punti e direzioni all'inizio e fine della curva guida
-   local ptS = EgtSP( nCrvId) 
-   local vtS = EgtSV( nCrvId)
-   vtS:rotate( vtSlicing, 90)
-   local ptE = EgtEP( nCrvId) 
-   local vtE = EgtEV( nCrvId)
-   vtE:rotate( vtSlicing, -90)
-   -- creazione del solido aperto (tubo)
-   local nSectId = CreateSection( ptS, vtS, dStrand, dH, vtSlicing, nSolidGrp) 
-   local nSrfId = EgtSurfTmSwept( nSolidGrp, nSectId, nCrvId, false, 0.1)
-   EgtErase( nSectId)
-   if not nSrfId then return nil end
+------------------------------------------------------------------------------
+local function CreateSpiralVaseCap( nSectId, vtDir, nSolidGrp)
+   
+   local vPt = {}
+   for i = 0, 7 do
+      vPt[i + 1] = EgtUP( nSectId, i, GDB_ID.ROOT)
+   end
+   
+   local vCrvs = {}
+   vCrvs[1] = EgtArc2PV( nSolidGrp, vPt[1], vPt[2], vtDir, GDB_RT.GLOB)
+   vCrvs[2] = EgtArc2PV( nSolidGrp, vPt[8], vPt[3], vtDir, GDB_RT.GLOB)
+   vCrvs[3] = EgtArc2PV( nSolidGrp, vPt[7], vPt[4], vtDir, GDB_RT.GLOB)
+   vCrvs[4] = EgtArc2PV( nSolidGrp, vPt[6], vPt[5], vtDir, GDB_RT.GLOB)
+   vCrvs[5] = EgtCurveCompo( nSolidGrp, {vCrvs[1]}, false, GDB_RT.GLOB)
+   EgtCloseCurveCompo( vCrvs[5])
+   vCrvs[6] = EgtCurveCompo( nSolidGrp, {vCrvs[4]}, false, GDB_RT.GLOB)
+   EgtCloseCurveCompo( vCrvs[6])
+   local nSurf1 = EgtSurfTmRuled( nSolidGrp, vCrvs[1], vCrvs[2], GDB_RUL.ISOPAR, s_dTol)
+   local nSurf2 = EgtSurfTmRuled( nSolidGrp, vCrvs[2], vCrvs[3], GDB_RUL.ISOPAR, s_dTol)
+   local nSurf3 = EgtSurfTmRuled( nSolidGrp, vCrvs[3], vCrvs[4], GDB_RUL.ISOPAR, s_dTol)
+   local nSurf4 = EgtSurfTmByRegion( nSolidGrp, vCrvs[5], s_dTol)
+   local nSurf5 = EgtSurfTmByRegion( nSolidGrp, vCrvs[6], s_dTol)
+   local nCapSrf = EgtSurfTmBySewing( nSolidGrp, {nSurf1, nSurf2, nSurf3, nSurf4, nSurf5})
+
+   for i = 1, #vCrvs do
+      EgtErase( vCrvs[i])
+   end
+
+   return nCapSrf
+end
+
+-------------------------------------------------------------------------------
+local function CreateSpiralVaseSolid( nCrvId, nSolidGrp, LayerParams, dStrand)
+   
+   -- gruppo temporaneo per conti 
+   local nGrpTmp = EgtGroup( nSolidGrp)
+   
+   local ptS = EgtSP( nCrvId, GDB_ID.ROOT)
+   local vtS = EgtSV( nCrvId, GDB_ID.ROOT)
+   local ptE = EgtEP( nCrvId, GDB_ID.ROOT)
+   local vtE = EgtEV( nCrvId, GDB_ID.ROOT)
+   -- appiattisco la curva
+   local nCrvCopy = EgtCopyGlob( nCrvId, nGrpTmp)
+   local dDelta = ( ptE - ptS) * LayerParams.vtSlicing
+   EgtSpiralizeCurveAlongExtrusion( nCrvCopy, - dDelta)
+   EgtMergeCurvesInCurveCompo( nCrvCopy)
+   EgtChangeClosedCurveStartPoint( nCrvCopy, ptS, GDB_RT.GLOB)
+  
+   -- calcolo la sezione iniziale
+   local vtDir = EgtSV( nCrvCopy, GDB_ID.ROOT)
+   vtDir:rotate( LayerParams.vtSlicing, 90)
+   local nSectId = CreateSection( ptS, vtDir, dStrand, LayerParams.dLayHeight, LayerParams.vtSlicing, nGrpTmp)
+   -- creo la sezione finale
+   local vtDir2 = EgtEV( nCrvCopy, GDB_ID.ROOT)
+   vtDir2:rotate( LayerParams.vtSlicing, 90)
+   local nSectE = CreateSection( ptE, vtDir2, dStrand, LayerParams.dLayHeight, LayerParams.vtSlicing, nGrpTmp)
+   
+   -- creo il solido aperto (tubo)
+   local vCrvs = {}
+   local _, dParE = EgtCurveDomain( nSectId)
+   for i = 0, dParE do
+      local ptRef = EgtUP( nSectId, i, GDB_ID.ROOT)
+      local dOffs = ( ptS - ptRef) * vtDir
+      vCrvs[i+1] = EgtOffsetCurveAdv( nCrvCopy, dOffs)
+      if not vCrvs[i+1] or vCrvs[i+1] == GDB_ID.NULL then
+         EgtErase( nGrpTmp)
+         return nil
+      end
+      local dMove = ( ptRef - ptS) * LayerParams.vtSlicing
+      EgtMove( vCrvs[i+1], LayerParams.vtSlicing * dMove, GDB_RT.GLOB)
+      EgtSpiralizeCurveAlongExtrusion( vCrvs[i+1], dDelta)
+      
+      -- modifico la curva per congiungerla ai caps
+      EgtAddCurveCompoLine( vCrvs[i+1], ptRef, false, GDB_RT.GLOB)
+      local ptRefEnd = EgtUP( nSectE, i, GDB_ID.ROOT)
+      EgtAddCurveCompoLine( vCrvs[i+1], ptRefEnd, true, GDB_RT.GLOB)
+   end
+   local vSurfs = {}
+   for i = 1, #vCrvs - 1 do
+      vSurfs[i] = EgtSurfTmRuled( nGrpTmp, vCrvs[i], vCrvs[i+1], GDB_RUL.MINDIST, s_dTol)
+      if not vSurfs[i] or vSurfs[i] == GDB_ID.NULL then
+         EgtErase( nGrpTmp)
+         return nil
+      end
+   end
+   local nSrfId = EgtSurfTmBySewing( nSolidGrp, vSurfs)
+  
   -- creazione del mezzo disco iniziale
-   local nSectS = CreateHalfSection( ptS, vtS, dStrand, dH, vtSlicing, nSolidGrp) 
-   local nSrfS = EgtSurfTmByScrewing( nSolidGrp, nSectS, ptS, vtSlicing, 180, 0, false, 0.1)
-   EgtErase( nSectS)
-   if not nSrfS then return nil end
+   local nCap1 = CreateSpiralVaseCap( nSectId, - vtS, nSolidGrp)
   -- creazione del mezzo disco finale
-   local nSectE = CreateHalfSection( ptE, vtE, dStrand, dH, vtSlicing, nSolidGrp) 
-   local nSrfE = EgtSurfTmByScrewing( nSolidGrp, nSectE, ptE, vtSlicing, 180, 0, false, 0.1)
-   EgtErase( nSectE)
-   if not nSrfE then return nil end
-   -- unione delle tre superfici
-   return EgtSurfTmBySewing( nSolidGrp, { nSrfId, nSrfS, nSrfE})
+   local nCap2 = CreateSpiralVaseCap( nSectE, vtE, nSolidGrp)
+   EgtInvertSurf( nCap2)
+
+   -- cancello le curve usate per la costruzione
+   EgtErase( nGrpTmp)
+
+   return EgtSurfTmBySewing( nSolidGrp, { nSrfId, nCap1, nCap2})
+end
+
+----------------------------------------------------------------------
+local function CreateStandardSolid( nCrvId, nSolidGrp, LayerParams, dStrand)
+
+   local dD1, dD2, dD3, dD4 = CalcSectionParams( dStrand, LayerParams.dLayHeight)
+   local nSrfId = EgtSurfTmRectSwept( nSolidGrp, dStrand, LayerParams.dLayHeight, dD2, dD3, nCrvId, GDB_RSCT.BEVEL, s_dTol)
+   return nSrfId
+end
+
+--------------------------------------------------------------------------------------
+local function CreateSolid( nCrvId, nSolidGrp, LayerParams, dStrand)
+   if LayerParams.bSpiralVase then
+      return CreateSpiralVaseSolid( nCrvId, nSolidGrp, LayerParams, dStrand)
+   else
+      return CreateStandardSolid( nCrvId, nSolidGrp, LayerParams, dStrand)
+   end
 end

 ---------------------------------------------------------------------
-local function CreateSolidFromCurve( nCrvId, nSolidGrp, LayerParams)
+local function CreateSolidFromCurve( nCrvId, nSolidGrp, LayerParams, nLayer)
  
   local nType = EgtGetInfo( nCrvId, KEY_TYPE, 'i')   
   if nType == TYPE.WIPE then return true end 
   -- scelta del colore
-   local Color = EgtStdColor( 'GRAY') 
+   local Color = EgtStdColor( 'GRAY')
   if nType == TYPE.OUTER_SHELL or nType == TYPE.EXTRA_OUTER_SHELL then 
      Color = EgtStdColor( 'TEAL')
   elseif nType == TYPE.INNER_SHELL or nType == TYPE.EXTRA_SHELL then
@@ -129,22 +202,21 @@ local function CreateSolidFromCurve( nCrvId, nSolidGrp, LayerParams)
      Color = EgtStdColor( 'YELLOW')
   elseif nType == TYPE.COASTING then
      Color = EgtStdColor( 'BLUE')
-   elseif nType == TYPE.WIPE then
-      Color = EgtStdColor( 'LIME')
   elseif nType == TYPE.RIB then
      Color = EgtStdColor( 'OLIVE')
   elseif nType == TYPE.AUX_SOLID then
-      Color = EgtStdColor( 'AQUA')      
+      Color = EgtStdColor( 'AQUA')
   end
-
-   local nCopyId = EgtCopyGlob( nCrvId, nSolidGrp)   
+   local dStrand = EgtGetInfo( nCrvId, KEY_CRV_STRAND, 'd')
+   
+   local nCopyId = EgtCopyGlob( nCrvId, nSolidGrp)
   local nId = GDB_ID.NULL
   local nParts = 1
   local LEN_REF = 100
   local bZigZagInfill = EgtGetInfo( nCopyId, KEY_ZIG_ZAG_INFILL, 'b') or false
   if bZigZagInfill then
      nId, nParts = EgtSplitCurveAtCorners( nCopyId, 80)
-   else   
+   else
      local dLen = EgtCurveLength( nCrvId)
      if dLen > LEN_REF and nType ~= TYPE.LINK and nType ~= TYPE.COASTING then
         nParts = EgtClamp( floor( dLen / LEN_REF), 1, 10)
@@ -155,44 +227,61 @@ local function CreateSolidFromCurve( nCrvId, nSolidGrp, LayerParams)
   if nId == GDB_ID.NULL then return false end
   local bOk = true
   for nInd = 0, nParts - 1 do
-      local nGuideId = nId + nInd 
-      local nSrfId = CreateSolid( nGuideId, nSolidGrp, LayerParams.dStrand - 2 * GEO.EPS_SMALL, LayerParams.dLayHeight, LayerParams.vtSlicing)
-
-      if not nSrfId then 
-         -- ritento con sezione leggermente modificata 
-         nSrfId = CreateSolid( nGuideId, nSolidGrp, LayerParams.dStrand - 100 * GEO.EPS_SMALL, LayerParams.dLayHeight, LayerParams.vtSlicing)
-         if not nSrfId then
-            nSrfId = CreateSolid( nGuideId, nSolidGrp, LayerParams.dStrand + 100 * GEO.EPS_SMALL, LayerParams.dLayHeight, LayerParams.vtSlicing)
-            if not nSrfId then 
-               -- ritento spezzando la curva
-               local nGrp = EgtGroup( nSolidGrp, Frame3d( ORIG(), LayerParams.vtSlicing))
-               EgtRelocateGlob( nGuideId, nGrp)
-               EgtApproxCurve( nGuideId, GDB_CA.LINES, 100 * GEO.EPS_SMALL)
-               EgtRelocateGlob( nGuideId, nSolidGrp)
-               local nFirstCrv, nCrvNbr = EgtSplitCurveAtCorners( nGuideId, 30)
-               if nFirstCrv and nCrvNbr > 1 then 
-                  local nSrfIds = {}
-                  for nInd2 = 0, nCrvNbr-1 do
-                     local nSrfId2 = CreateSolid( nFirstCrv + nInd2, nSolidGrp, LayerParams.dStrand - 100 * GEO.EPS_SMALL, LayerParams.dLayHeight, LayerParams.vtSlicing)
-                     EgtErase( nFirstCrv + nInd2)
-                     if nSrfId2 then
-                        table.insert( nSrfIds, nSrfId2)
-                     end                 
-                  end
-                  if #nSrfIds == nCrvNbr then  
-                     nSrfId = EgtSurfTmBySewing( nSolidGrp, nSrfIds) 
-                  end
+      local nGuideId = nId + nInd
+      local nSrfId = CreateSolid( nGuideId, nSolidGrp, LayerParams, dStrand - 5 * GEO.EPS_SMALL)
+      if not nSrfId then
+         EgtOutLog( 'Warning : CreateSolid failed '.. '(layer '..tostring( nLayer)..', curve '..tostring( nCrvId)..')')
+         -- se non ultima, provo a spostare l'estremità finale
+         if nInd < nParts - 1 then
+            local nCopyId = EgtCopy( nGuideId + 1, nGuideId, GDB_IN.AFTER)
+            if nCopyId then
+               local LEN_TRIM = 10
+               local bOk1 = EgtTrimCurveEndAtLen( nCopyId, LEN_TRIM)
+               local bOk2 = EgtAddCurveCompoCurve( nGuideId, nCopyId)
+               local bOk3 = EgtTrimCurveStartAtLen( nGuideId + 1, LEN_TRIM)
+               nSrfId = CreateSolid( nGuideId, nSolidGrp, LayerParams, dStrand - 5 * GEO.EPS_SMALL)
+               if not nSrfId then
+                  nSrfId = CreateSolid( nGuideId, nSolidGrp, LayerParams, dStrand - 50 * GEO.EPS_SMALL)
               end
            end
         end
+         -- ritento spezzando la curva
+         if not nSrfId then
+            EgtOutLog( 'Warning : CreateSolid_2 failed')
+            local nGrp = EgtGroup( nSolidGrp, Frame3d( ORIG(), LayerParams.vtSlicing), GDB_RT.GLOB)
+            EgtRelocateGlob( nGuideId, nGrp)
+            EgtApproxCurve( nGuideId, GDB_CA.LINES, 100 * GEO.EPS_SMALL)
+            EgtRelocateGlob( nGuideId, nSolidGrp)
+            local nFirstCrv, nCrvNbr = EgtSplitCurveAtCorners( nGuideId, 30)
+            if nFirstCrv and nCrvNbr > 1 then
+               local nSrfIds = {}
+               for nInd2 = 0, nCrvNbr-1 do
+                  local nSrfId2 = CreateSolid( nFirstCrv + nInd2, nSolidGrp, LayerParams, dStrand - 50 * GEO.EPS_SMALL)
+                  EgtErase( nFirstCrv + nInd2)
+                  if nSrfId2 then
+                     table.insert( nSrfIds, nSrfId2)
+                  end
+               end
+               if #nSrfIds == nCrvNbr then
+                  nSrfId = EgtSurfTmBySewing( nSolidGrp, nSrfIds)
+               else
+                  EgtOutLog( 'Warning : CreateSolid_3 failed')
+               end
+            else
+               EgtErase( nFirstCrv)
+            end
+            EgtErase( nGrp)
+         end
      end
-      
+
      if nSrfId then
         EgtSetColor( nSrfId, Color)
         EgtSetInfo( nSrfId, KEY_TYPE, nType)
+         EgtSetInfo( nSrfId, KEY_SLICE_NBR, nLayer)
      else 
-         bOk = false 
-      end      
+         bOk = false
+         EgtOutLog( 'Warning : CreateSolid_Sewing failed')
+      end
      EgtErase( nGuideId)
   end 

@@ -201,90 +290,99 @@ end

 ---------------------------------------------------------------------
 function RunCalcSolids.Exec()
-   
+
+   -- per determinare il tempo di calcolo
+   EgtStartCounter()
+
   local nPartIndex = 1
   local nPartId = EgtGetFirstNameInGroup( GDB_ID.ROOT, PART .. nPartIndex) or EgtGetFirstNameInGroup( GDB_ID.ROOT, PART)
   while nPartId do
-      
+
      if EgtGetInfo( nPartId, KEY_PART_ON_TABLE, 'b') then
         -- verifico se necessario calcolare il solido
         local bCalcSolid = EgtGetInfo( nPartId, KEY_CALC_SOLIDS, 'b') or false
-         local bHasSolids = EgtGetInfo( nPartId, KEY_HAS_SOLIDS, 'b') or false
-         
-         if bCalcSolid and not bHasSolids then
-            
+
+         if bCalcSolid then
+
            -- recupero i suoi slice
            local vLayIds = EgtGetNameInGroup( nPartId, SLICE_LAYER .. '*')
            if not vLayIds then
               EgtOutBox( 'No sliced part in this project!', 'Error', 'ERROR')
               return
            end
-            
+
            EgtSetInfo( nPartId, KEY_HAS_SOLIDS, 1)
-         
-            local vErr = {}
+
            -- recupero i parametri necessari al calcolo dei solidi 
            local LayerParams = GetLayerParamsForSolidCalc( nPartId)
-            
+
            for nIdx = 1, #vLayIds do
-               
+               -- flag di interruzione perchè trovati solidi già ok
+               local bSolidsOk = false
+               -- indice layer (per log)
+               local nLayer = EgtGetInfo( vLayIds[ nIdx], KEY_SLICE_NBR, 'i')
               -- scorro tutti i gruppi di contorni
               local nCrvGrpId = EgtGetFirstNameInGroup( vLayIds[ nIdx], CONTOUR_GRP.."*") or GDB_ID.NULL
               while nCrvGrpId ~= GDB_ID.NULL do
-         
+
                  -- recupero il gruppo dei percorsi utensile 
                  local nTPathGrpId = EgtGetFirstNameInGroup( nCrvGrpId, TOOLPATH_GRP) or GDB_ID.NULL
                  if nTPathGrpId == GDB_ID.NULL then
                     EgtOutBox( 'Error no tool paths', 'SolidCalc')
-                     return 
+                     return
                  end
-         
+
                  -- recupero il gruppo dei solidi 
                  local nSolidGrpId = EgtGetFirstNameInGroup( nCrvGrpId, SOLID_GRP) or GDB_ID.NULL
                  if nSolidGrpId == GDB_ID.NULL then
                     nSolidGrpId = EgtGroup( nCrvGrpId)
                     EgtSetName( nSolidGrpId, SOLID_GRP)
                     EgtSetLevel( nSolidGrpId, GDB_LV.TEMP)
+                     -- scorro le curve del percorso utensile
+                     local nId = EgtGetFirstInGroup( nTPathGrpId) 
+                     while nId do
+                        local bOk = CreateSolidFromCurve( nId, nSolidGrpId, LayerParams, nLayer)
+                        nId = EgtGetNext( nId)
+                     end
                  else
-                     EgtEmptyGroup( nSolidGrpId)
+                     bSolidsOk = true
+                     break
                  end
-         
-                  -- scorro le curve del percorso utensile
-                  local nId = EgtGetFirstInGroup( nTPathGrpId) 
-                  while nId do
-                     local bOk = CreateSolidFromCurve( nId, nSolidGrpId, LayerParams)
-                     if not bOk then
-                        table.insert( vErr, nIdx)
-                     end
-                     nId = EgtGetNext( nId)
-                  end
-                  
-                  -- processo gli eventi
-                  if ( nIdx % 20) == 0 then
-                     EgtDraw()
-                     if EgtProcessEvents( nIdx / #vLayIds * 100, 0) == 1 then
-                        return
-                     end
-                  end
-         
+
                  --passo al gruppo di contorni successivo
                  nCrvGrpId = EgtGetNextName( nCrvGrpId, CONTOUR_GRP.."*") or GDB_ID.NULL
               end
-               EgtDraw()               
-               if EgtProcessEvents( EgtIf( PRINT, 300, 0) + nIdx / #vLayIds * 100, 0) == 1 then
-                  return 
+               if bSolidsOk then
+                  break
+               end
+               local nStep = 10
+               if nIdx > 400 then
+                  nStep = 80
+               elseif nIdx > 200 then
+                  nStep = 40
+               elseif nIdx > 100 then
+                  nStep = 20
+               end
+               if ( nIdx % nStep) == 0 then
+                  EgtDraw()
+               end
+               
+               if EgtProcessEvents( EgtIf( PRINT, 400, 0) + nIdx / #vLayIds * 100, 0) == 1 then
+                  -- se interrompo cancello i solidi realizzati
+                  for i = 1, #vLayIds do
+                     local vGrpId = EgtGetNameInGroup( vLayIds[i], CONTOUR_GRP .. '*') or {}
+                     for j = 1, #vGrpId do
+                        local nSolidId = EgtGetNameInGroup( vGrpId[j], SOLID_GRP .. '*') or GDB_ID.NULL
+                        EgtErase( nSolidId)
+                     end
+                  end
+                  -- rimuovo info della presenza solidi
+                  EgtSetInfo( nPartId, KEY_HAS_SOLIDS, false)
+                  EgtDraw()
+                  return
               end
            end
-         
-            -- eventuale segnalazione errori
-            -- if #vErr > 0 then
-            --    EgtOutBox( 'Error on layers :\n' .. table.concat( vErr, ','), 'SolidCalc')
-            -- end
-            
-            for i = 1, #vErr do
-               EgtOutLog( 'Error on solid creation (layer ' .. vErr[i] .. ') - SolidCalc')
-            end
-            
+
            -- eventuale aggiornamento delle ViewInfo
            local nViewId = EgtGetFirstNameInGroup( GDB_ID.ROOT, VIEWPARAMS)
            if nViewId then
@@ -293,11 +391,16 @@ function RunCalcSolids.Exec()
         end

      end
-      
+
      nPartIndex = nPartIndex + 1
      nPartId = EgtGetFirstNameInGroup( GDB_ID.ROOT, PART .. nPartIndex) or EgtGetNextName( nPartId, PART)
   end
-   
+
+   EgtDraw()
+
+   -- report tempo di calcolo in log
+   EgtOutLog( string.format( '  CalcSolidsTime = %.2f ms', EgtStopCounter()))
+
 end

 ---------------------------------------------------------------------
@@ -1,4 +1,4 @@
-- RunGcodeGenerate.lua by Egaltech s.r.l. 2022/06/14
+-- RunGcodeGenerate.lua by Egaltech s.r.l. 2023/04/11
 -- Calcoli prima fase per Stampa 3d

 -- Tabella per definizione modulo
@@ -24,7 +24,7 @@ end
 function RunGcodeGenerate.Exec()
   
   -- aggiorno interfaccia
-   EgtProcessEvents( 501, 0)
+   EgtProcessEvents( 601, 0)

   -- Recupero il pezzo (per ora primo e unico)
   local nPartIndex = 1
@@ -45,7 +45,7 @@ function RunGcodeGenerate.Exec()
   local LayerParams = GetLayerParamsForGcodeGenerate( nPartId)

   -- aggiorno interfaccia
-   EgtProcessEvents( 505, 0)
+   EgtProcessEvents( 605, 0)

   -- Ciclo sui layer
   local vEntId = {}
@@ -75,7 +75,7 @@ function RunGcodeGenerate.Exec()
   end

   -- aggiorno interfaccia
-   EgtProcessEvents( 510, 0)
+   EgtProcessEvents( 610, 0)

   -- Imposto gruppo di lavoro
   EgtSetCurrMachGroup()
@@ -97,7 +97,7 @@ function RunGcodeGenerate.Exec()
   end

   -- aggiorno interfaccia
-   EgtProcessEvents( 520, 0)
+   EgtProcessEvents( 620, 0)

   EgtSetMachiningGeometry( vEntId)

@@ -106,36 +106,51 @@ function RunGcodeGenerate.Exec()

   if not EgtApplyMachining() then
      local nErr, sErr = EgtGetLastMachMgrError()
-      local sMsg = 'Error applying Extrusion'
+      local sMsg = ''
      if nErr == 2803 and string.find( sErr, '(3)', 1, true) then
-         sMsg = sMsg .. ' (missing Feed & Speed)'
+         sMsg = ' Missing Feed & Speed.'
+      elseif nErr == 2804 then
+         sMsg = ' Axes Values not calculable.'
+      elseif nErr == 2805 then
+         sMsg = ' Outstroke Axes (see Log File).'
+      else
+         sMsg = ' See Log File.'
      end
      EgtResetCurrMachGroup()
-      EgtOutBox( sMsg, 'GcodeGenerate')
+      if PRINT and PRINT.PROGRAM == 1 then
+         PRINT.ERR = 1
+         PRINT.MSG = sMsg
+      else
+         EgtOutBox( 'Error in Machining :'..sMsg, 'GcodeGenerate')
+      end
      return
   end

   -- aggiorno interfaccia
-   EgtProcessEvents( 550, 0)
+   EgtProcessEvents( 650, 0)

   -- Salvo il progetto
   local sFilePath = EgtGetCurrFilePath()
-   sFilePath = EgtChangePathExtension( sFilePath, 'nge')
+   sFilePath = EgtChangePathExtension( sFilePath, 'icrs')
   EgtSetCurrFilePath( sFilePath)
   EgtSaveFile()

   -- aggiorno interfaccia
-   EgtProcessEvents( 580, 0)
+   EgtProcessEvents( 680, 0)

   -- Genero il programma CN
-   local sInfo = 'EgtCAM5 ver.' .. EgtGetExeVersion() .. ' - ' .. sPath
-   local bGenOk = EgtGenerate( '', sInfo)
+   local sInfo = 'Icarus ver.' .. EgtGetExeVersion() .. ' - ' .. sPath
+   local sISOFilePath = ''
+   if PRINT and PRINT.PROGRAM == 1 and PRINT.ISOFILEPATH then
+      sISOFilePath = PRINT.ISOFILEPATH
+   end
+   local bGenOk = EgtGenerate( sISOFilePath, sInfo)
   if bGenOk then
      EgtEstimate('')
   end

   -- aggiorno interfaccia
-   EgtProcessEvents( 590, 0)
+   EgtProcessEvents( 690, 0)

   EgtResetCurrMachGroup()

@@ -143,7 +158,7 @@ function RunGcodeGenerate.Exec()
      if bGenOk then
         PRINT.ERR = 0
      else
-         PRINT.ERR = 999
+         PRINT.ERR = 2
      end
   else
      if bGenOk then
@@ -154,7 +169,7 @@ function RunGcodeGenerate.Exec()
   end
   
   -- aggiorno interfaccia
-   EgtProcessEvents( 600, 0)
+   EgtProcessEvents( 700, 0)

 end

@@ -1,4 +1,4 @@
-- RunMachParamFromSWCalc.lua by Egaltech s.r.l. 2022/09/15
+-- RunMachParamFromSWCalc.lua by Egaltech s.r.l. 2022/12/28
 -- Calcolo dei parametri di stampa

 -- Tabella per definizione modulo
@@ -12,9 +12,12 @@ EgtOutLog( ' RunMachParamFromSWCalc started', 1)
 -- Costanti generali
 local AMD = require( 'AddManData')

+--local MACHINING = {}
+--MACHINING.K = 103
 --local MATERIAL = {}
 --MATERIAL.Name = 'AKROMID® B3 ICF 40'
--MATERIAL.K = 0.1
+--MATERIAL.K_EXTRUSION = 110
+--MATERIAL.K_LAYERTIME = 105
 --MATERIAL.C1 = 0.8742
 --MATERIAL.C2 = 0.8964
 --MATERIAL.Density = 1.31
@@ -31,6 +34,14 @@ local AMD = require( 'AddManData')
 ---------------------------------------------------------------------
 function RunMachParamFromSWCalc.Exec()

+   -- valori default per nuovi parametri
+   MATERIAL.K_LAYERTIME = MATERIAL.K_LAYERTIME or 100
+   MATERIAL.K_EXTRUSION = MATERIAL.K_EXTRUSION or 100
+   if not MACHINING then
+      MACHINING = {}
+      MACHINING.K = 100
+   end
+
   -- layer dei risultati
   local nResultLayerId = EgtGetFirstNameInGroup( GDB_ID.ROOT, LAY_TFSCALC)
   if not nResultLayerId then
@@ -58,43 +69,53 @@ function RunMachParamFromSWCalc.Exec()
      local dStrand = EgtGetInfo( nPartId, KEY_STRAND, 'd')
      local dStrandCount = EgtGetInfo( nPartId, KEY_SHELLS_NBR, 'd')
      -- recupero numero di strati per progress
-      local nLastLayerId = EgtGetLastNameInGroup( nPartId, SLICE_LAYER .. '*')
-      local nLayerQty = EgtGetInfo( nLastLayerId, KEY_SLICE_NBR, 'i')
+      local nLastLayerId = EgtGetLastNameInGroup( nPartId, SLICE_LAYER .. '*') or GDB_ID.NULL
+      local nLayerQty = EgtGetInfo( nLastLayerId, KEY_SLICE_NBR, 'i') or 0
      -- ciclo sui layer
      local nLayerIndex = 1
-      local nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex)
+      local nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex) or EgtGetFirstNameInGroup( nPartId, "__" .. SLICE_LAYER .. nLayerIndex)
      while nLayerId do
         -- rimuovo eventuale info precedente del tempo di attesa
         EgtRemoveInfo( nLayerId, KEY_WAITING_TIME)
         -- calcolo lunghezza totale del layer
         local dTotLayerLength = 0
+         local dTotLayerLengthForMass = 0
         local dTotLayerArea = 0
         local nCrvId = EgtGetFirstNameInGroup( nLayerId, CONTOUR_GRP .. '*')
         while nCrvId do
            local nToolPathId = EgtGetFirstNameInGroup( nCrvId, TOOLPATH_GRP)
            -- sommo lunghezze percorsi
            local dTotCrvLength = 0
+            local dTotCrvLengthForMass = 0
            nShellId = EgtGetFirstInGroup( nToolPathId)
            while nShellId do
               dTotCrvLength = dTotCrvLength + EgtCurveLength( nShellId)
+               if EgtGetName( nShellId) ~= WIPE_CRV then
+                  dTotCrvLengthForMass = dTotCrvLengthForMass + EgtCurveLength( nShellId)
+               end
               nShellId = EgtGetNext( nShellId)
            end
            dTotLayerLength = dTotLayerLength + dTotCrvLength
+            dTotLayerLengthForMass = dTotLayerLengthForMass + dTotCrvLengthForMass
            -- recupero area
            local nOuterCrvId = EgtGetFirstNameInGroup( nCrvId, OUTER_CRV)
-            local _, _, dTotCrvArea = EgtCurveArea( nOuterCrvId)
-            local dOuterLength = EgtCurveLength( nOuterCrvId)
-            -- recupero offset del part per aggiungerlo all'area interna
-            local dOffset = EgtGetInfo( nPartId, KEY_OFFSET_SLICE, 'd')
-            dTotCrvArea = dTotCrvArea + ( dOffset * dOuterLength)
-            dTotLayerArea = dTotLayerArea + dTotCrvArea
+            if nOuterCrvId and dStrandCount > 0.5 then
+               local _, _, dTotCrvArea = EgtCurveArea( nOuterCrvId)
+               local dOuterLength = EgtCurveLength( nOuterCrvId)
+               -- recupero offset del part per aggiungerlo all'area interna
+               local dOffset = EgtGetInfo( nPartId, KEY_OFFSET_SLICE, 'd')
+               dTotCrvArea = dTotCrvArea + ( dOffset * dOuterLength)
+               dTotLayerArea = dTotLayerArea + dTotCrvArea
+            end
            nCrvId = EgtGetNextName( nCrvId, CONTOUR_GRP .. '*')
         end
         -- recupero feed del layer
         local dLayerFeed = 0
+         local dLayerWait = 0
         local nLayerResultId = EgtGetFirstNameInGroup( nResultLayerId, nLayerIndex)
         if nLayerResultId then
            dLayerFeed = EgtGetInfo( nLayerResultId, KEY_FCUR, 'd') or 0
+            dLayerWait = EgtGetInfo( nLayerResultId, KEY_WAITING_TIME, 'd') or 0
         else
            nLayerResultId = EgtGroup( nResultLayerId)
            EgtSetName( nLayerResultId, nLayerIndex)
@@ -112,11 +133,27 @@ function RunMachParamFromSWCalc.Exec()
         end
         EgtSetInfo( nLayerResultId, KEY_SLICEID, nOrigLayers)
         -- calcolo costante MF
-         local dMF = dTotLayerLength * dStrand / dTotLayerArea * 100
+         local dMF = 1
+         local dSC = 1
+         if dTotLayerArea > 1 then
+            dMF = dTotLayerLength * dStrand / dTotLayerArea * 100
+            dSC = dStrandCount
+         else
+            dMF = 100
+            local nRibsLayId = EgtGetFirstNameInGroup( nLayerId, RIBS_GRP) or GDB_ID.NULL
+            local nCrvId = EgtGetFirstInGroup( nRibsLayId)
+            while nCrvId do
+               if EgtGetInfo( nCrvId, KEY_RIBS_TYPE, 'i') == RIB_TYPE.UNBOUNDED then
+                  dSC = ( EgtGetInfo( nCrvId, KEY_RIBS_SHELLS_NBR, 'd') or dSC) / 2
+                  break
+               end
+               nCrvId = EgtGetNext( nCrvId)
+            end
+         end
         -- calcolo tempi stimati del layer
-         local dTMin = ( dMF + MATERIAL.AMin) / MATERIAL.BMin * pow( 0.25 * dStrand, MATERIAL.KW) * pow( dSliceStep, MATERIAL.KZ) * pow( dStrandCount, MATERIAL.KN)
-         local dTTrg = ( dMF + MATERIAL.ATrg) / MATERIAL.BTrg * pow( 0.25 * dStrand, MATERIAL.KW) * pow( dSliceStep, MATERIAL.KZ) * pow( dStrandCount, MATERIAL.KN)
-         local dTMax = ( dMF + MATERIAL.AMax) / MATERIAL.BMax * pow( 0.25 * dStrand, MATERIAL.KW) * pow( dSliceStep, MATERIAL.KZ) * pow( dStrandCount, MATERIAL.KN)
+         local dTMin = ( MATERIAL.K_LAYERTIME / 100.0) * ( dMF + MATERIAL.AMin) / MATERIAL.BMin * pow( 0.25 * dStrand, MATERIAL.KW) * pow( dSliceStep, MATERIAL.KZ) * pow( dSC, MATERIAL.KN)
+         local dTTrg = ( MATERIAL.K_LAYERTIME / 100.0) * ( dMF + MATERIAL.ATrg) / MATERIAL.BTrg * pow( 0.25 * dStrand, MATERIAL.KW) * pow( dSliceStep, MATERIAL.KZ) * pow( dSC, MATERIAL.KN)
+         local dTMax = ( MATERIAL.K_LAYERTIME / 100.0) * ( dMF + MATERIAL.AMax) / MATERIAL.BMax * pow( 0.25 * dStrand, MATERIAL.KW) * pow( dSliceStep, MATERIAL.KZ) * pow( dSC, MATERIAL.KN)
         local dFMin = dTotLayerLength / dTMax * 60
         local dFTrg = dTotLayerLength / dTTrg * 60
         local dFMax = dTotLayerLength / dTMin * 60
@@ -126,10 +163,11 @@ function RunMachParamFromSWCalc.Exec()
         else
            dLayerTime = dTotLayerLength / dLayerFeed * 60
         end
+         dLayerWait = floor( dTMin + 0.5) - floor( dLayerTime + 0.5)
         -- calcolo la portata
         local Vf = dLayerFeed * ( ( dStrand - dSliceStep) * dSliceStep + pi * pow( dSliceStep / 2, 2)) / 1000
         -- calcolo speed
-         local dSpeed = ( 1 + MATERIAL.K) * pow( Vf / MATERIAL.C1, 1 / MATERIAL.C2)
+         local dSpeed = ( MATERIAL.K_EXTRUSION / 100.0) * ( MACHINING.K / 100.0) * pow( Vf / MATERIAL.C1, 1 / MATERIAL.C2)
         -- verifico se speed esce da minimo e massimo della macchina
         local bSpeedOk = true
         if dSpeed < dSMin then
@@ -141,11 +179,12 @@ function RunMachParamFromSWCalc.Exec()
            dSpeed = dSMax
         end
         if not bSpeedOk then
-            dLayerFeed = ( MATERIAL.C1 * pow( ( dSpeed / ( 1 + MATERIAL.K)), MATERIAL.C2)) * 1000 / ( ( dStrand - dSliceStep) * dSliceStep + pi * pow( dSliceStep / 2, 2))
+            dLayerFeed = ( MATERIAL.C1 * pow( ( dSpeed / (( MATERIAL.K_EXTRUSION / 100.0) * ( MACHINING.K / 100.0))), MATERIAL.C2)) * 1000 / ( ( dStrand - dSliceStep) * dSliceStep + pi * pow( dSliceStep / 2, 2))
            dLayerTime = dTotLayerLength / dLayerFeed * 60
+            dLayerWait = floor( dTMin + 0.5) - floor( dLayerTime + 0.5)
         end
         -- calcolo massa dello strato
-         local dLayerMass = dTotLayerLength * dSliceStep * dStrand * MATERIAL.Density * 1e-6
+         local dLayerMass = dTotLayerLengthForMass * dSliceStep * dStrand * MATERIAL.Density * 1e-6
         if dLayerMass and dLayerMass > 0 then
            dPrintMass = dPrintMass + dLayerMass
         end
@@ -157,6 +196,11 @@ function RunMachParamFromSWCalc.Exec()
            EgtSetInfo( nToolPathId, KEY_SPEED, dSpeed)
            nCrvId = EgtGetNextName( nCrvId, CONTOUR_GRP .. '*')
         end
+         -- scrivo info attesa
+         if dLayerWait > 0 then
+            EgtSetInfo( nLayerId, KEY_WAITING_TIME, dLayerWait)
+            EgtSetInfo( nLayerResultId, KEY_WAITING_TIME, dLayerWait)
+         end
         -- scrivo valori in struttura dati
         --local nLayerResultId = EgtGetFirstNameInGroup( nResultLayerId, nLayerIndex)
         EgtSetInfo( nLayerResultId, KEY_TMIN, dTMin)
@@ -169,10 +213,16 @@ function RunMachParamFromSWCalc.Exec()
         EgtSetInfo( nLayerResultId, KEY_FCUR, dLayerFeed)
         EgtSetInfo( nLayerResultId, KEY_LENGTH, dTotLayerLength)
         EgtSetInfo( nLayerResultId, KEY_SPEED, dSpeed)
+         EgtSetInfo( nLayerResultId, KEY_MF, dMF)
+         EgtSetInfo( nLayerResultId, KEY_TOTAREA, dTotLayerArea)
         -- aggiorno interfaccia
-         EgtProcessEvents( 400 + ( nLayerIndex / nLayerQty * 100), 0)
+         if EgtProcessEvents( 500 + ( nLayerIndex / nLayerQty * 100), 0) == 1 then
+            EgtEmptyGroup( nResultLayerId)
+            return
+         end
+         
         nLayerIndex = nLayerIndex + 1
-         nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex)
+         nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex) or EgtGetFirstNameInGroup( nPartId, "__" .. SLICE_LAYER .. nLayerIndex)
      end
      if nMaxIndex < nLayerIndex then nMaxIndex = nLayerIndex end
      nPartId = EgtGetNextPart( nPartId)
@@ -1,198 +0,0 @@
-- RunMachiningParamCalc.lua by Egaltech s.r.l. 2022/04/13
-- Gestione visualizzazione per Stampa 3d
-
-- Tabella per definizione modulo
-local RunMachiningParamCalc = {}
-
-- Intestazioni
-require( 'EgtBase')
-
-EgtOutLog( ' RunMachiningParamCalc started', 1)
-
-- Costanti generali
-local AMD = require( 'AddManData')
-local CSV = require( 'CSVManager')
-
---------------------------------------------------------------------
-function RunMachiningParamCalc.Exec()
-
-   -- Dati recuperati dalla macchina
-   local sMachIni = EgtGetCurrMachineDir() .. '\\' .. EgtGetCurrMachineName() .. '.ini'
-   local dCoeffX = tonumber( EgtGetStringFromIni( SEC_3DPRINTING, KEY_COEFF_X, 0, sMachIni))
-   local dCoeffY = tonumber( EgtGetStringFromIni( SEC_3DPRINTING, KEY_COEFF_Y, 0, sMachIni))
-
-   -- File dei risultati
-   local sCalcBaseDir = EgtGetStringFromIni( '3dPrinting', 'BaseDir', 'C:\\ProgramData\\Egaltech\\EgtCam5\\3dPrinting', EgtGetIniFile())
-   local sCurrProjectPath = EgtGetCurrFilePath()
-   local sResultFile = EgtChangePathExtension( sCurrProjectPath, '.csv')
-   local bResultFile = EgtExistsFile( sResultFile)
-
-   -- carico eventuale file dei risultati
-   local CSVOldResult
-   if bResultFile then
-      CSVOldResult = read_file( sResultFile)
-   end
-
-   -- tabella del csv del risultato
-   local CSVNewResult = {}
-
-   -- ciclo sui pezzi
-   local nPartId = EgtGetFirstPart()
-   while nPartId do
-      if not EgtGetInfo( nPartId, KEY_PART_ON_TABLE, 'b') then
-         nPartId = EgtGetNextPart( nPartId)
-         goto continue 
-      end
-      -- recupero i parametri di lavorazione del pezzo
-      local dMachiningFeed = EgtGetInfo( nPartId, KEY_FEED, 'd')
-      local dSliceStep = EgtGetInfo( nPartId, KEY_SLICE_STEP, 'd')
-      local dStrand = EgtGetInfo( nPartId, KEY_STRAND, 'd')
-      local sMaterial = EgtGetInfo( nPartId, KEY_MATERIAL)
-      -- verifico la definizione dei parametri
-      if not dMachiningFeed then
-         EgtOutBox( 'Impossible calculating before applying a machining.', 'Error', 'ERROR')
-         return
-      end
-      -- calcolo intervallo tempi consentito
-      local sMaterialPath = sCalcBaseDir .. '\\Materials\\' .. sMaterial .. '.csv'
-      local MaterialCSV = read_file( sMaterialPath)
-      local dMinTime = 0
-      local dMaxTime = 0
-      if not MaterialCSV then
-         EgtOutBox( 'Material csv file not found.', 'Error', 'ERROR')
-         return
-      end
-      local bSectionFound = false
-      for nSectionIndex = 1, #MaterialCSV do
-         local Section = MaterialCSV[nSectionIndex]
-         if tonumber( Section[1]) == dStrand and tonumber( Section[2]) == dSliceStep then
-            dMinTime = tonumber(Section[3])
-            dMaxTime = tonumber(Section[4])
-            bSectionFound = true
-            break
-         end
-      end
-      if not bSectionFound then
-         EgtOutBox( 'Section not found in Material csv file.', 'Error', 'ERROR')
-         return
-      end
-      -- ciclo sui layer
-      local nLayerIndex = 1
-      local nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex)
-      while nLayerId do
-         local sLayerName = EgtGetName( nLayerId)
-         local nLayerIndex = tonumber( sLayerName:sub( #SLICE_LAYER + 1))
-         -- rimuovo eventuale info precedente del tempo di attesa
-         EgtRemoveInfo( nLayerId, KEY_WAITING_TIME)
-         -- calcolo lunghezza totale del layer
-         local dTotLayerLength = 0
-         local nCrvId = EgtGetFirstGroupInGroup( nLayerId)
-         while nCrvId do
-            local nToolPathId = EgtGetFirstNameInGroup( nCrvId, TOOLPATH_GRP)
-            -- sommo lunghezze percorsi
-            local dTotCrvLength = 0
-            nShellId = EgtGetFirstInGroup( nToolPathId)
-            while nShellId do
-               --local nType = EgtGetInfo( nShellId, KEY_TYPE, 'i')
-               dTotCrvLength = dTotCrvLength + EgtCurveLength( nShellId)
-               nShellId = EgtGetNext( nShellId)
-            end
-            dTotLayerLength = dTotLayerLength + dTotCrvLength
-            nCrvId = EgtGetNext( nCrvId)
-         end
-         -- recupero feed del layer
-         local dLayerFeed = 0
-         if bResultFile then
-            -- leggo il valore dal file
-            local bResultFound = false
-            for nResultIndex = 1, #CSVOldResult do
-               local OldResult = CSVOldResult[nResultIndex]
-               if tonumber( OldResult[1]) == nLayerIndex then
-                  dLayerFeed = tonumber( OldResult[5])
-                  bResultFound = true
-                  break
-               end
-            end
-            if not bResultFound then
-               -- uso valore di default
-               dLayerFeed = dMachiningFeed
-            end
-         else
-            -- uso valore di default
-            dLayerFeed = dMachiningFeed
-         end
-         -- calcolo tempo stimato del layer
-         local dEsteemedTime = dTotLayerLength / dLayerFeed * 60
-         -- calcolo speed
-         local dSpeed = ((( dLayerFeed * dSliceStep * dStrand ) / 60) - dCoeffX) / dCoeffY
-         -- scrivo info feed e speed in group toolpath
-         nCrvId = EgtGetFirstNameInGroup( nLayerId, CONTOUR_GRP .. '*')
-         while nCrvId do
-            local nToolPathId = EgtGetFirstNameInGroup( nCrvId, TOOLPATH_GRP)
-            EgtSetInfo( nToolPathId, KEY_FEED, dLayerFeed)
-            EgtSetInfo( nToolPathId, KEY_SPEED, dSpeed)
-            nCrvId = EgtGetNextName( nCrvId, CONTOUR_GRP .. '*')
-         end
-         -- salvo e riporto valori calcolati in tabella per csv
-         local sStatus = ''
-         if dEsteemedTime < dMinTime then
-            EgtSetInfo( nLayerId, KEY_RESULT, RESULT.KO_MINUS)
-            EgtSetInfo( nLayerId, KEY_WAITING_TIME, dMinTime - dEsteemedTime)
-            sStatus = 'KO(-)'
-         elseif dEsteemedTime > dMinTime and dEsteemedTime < dMaxTime then
-            EgtSetInfo( nLayerId, KEY_RESULT, RESULT.OK)
-            sStatus = 'OK'
-         elseif dEsteemedTime > dMaxTime then
-            EgtSetInfo( nLayerId, KEY_RESULT, RESULT.KO_PLUS)
-            sStatus = 'KO(+)'
-         end
-         --table.insert( CSVOutTable, { Index = nLayerIndex, EsteemedTime = dEsteemedTime, Feed = dLayerFeed, Speed = dSpeed})
-         table.insert( CSVNewResult, { nLayerIndex, dTotLayerLength, dEsteemedTime, sStatus, dLayerFeed, dSpeed})
-         nLayerIndex = nLayerIndex + 1
-         nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex)
-      end
-      nPartId = EgtGetNextPart( nPartId)
-      ::continue::
-   end
-
-   -- aggiorno palette
-   local nViewId = EgtGetFirstNameInGroup( GDB_ID.ROOT, VIEWPARAMS)
-   local nPaletteType = EgtGetInfo( nViewId, KEY_PALETTE, 'i')
-   if nPaletteType == PALETTE_TYPE.RESULTS then
-      local RSP = require( 'RunSlicePalette')
-      RSP.UpdateColors( nPaletteType)
-   end
-   -- scrivo nuovo file csv di risultato
-   local file = io.open( sResultFile, "w")
-   if file then
-      file:write('LayerIndex; Len; Time; Status; Feed; Speed')
-      file:write('\n')
-      for NewResultIndex = 1, #CSVNewResult do
-         local CSVOutLine = CSVNewResult[NewResultIndex]
-         local sParams = ''
-         for ParamIndex = 1, #CSVOutLine do
-            if ParamIndex > 1 then
-               sParams = sParams .. ";"
-            end
-            if ParamIndex == 4 then
-               sParams = sParams .. CSVOutLine[ParamIndex]
-            else
-               sParams = sParams .. EgtNumToString( CSVOutLine[ParamIndex], 1)
-            end
-         end
-         file:write(sParams)
-         file:write('\n')
-      end
-      file:close()
-      local sReadProgPath = EgtGetStringFromIni( '3dPrinting', RESULT_READ_PROG, "", EgtGetIniFile())
-      if not sReadProgPath or not EgtWinExec( '"'..sReadProgPath..'" "'..sResultFile..'"') then
-         EgtOutBox( 'Impossible opening software to show results. You can find them in ' .. sResultFile, 'Error', 'ERROR')
-      end
-   else
-      EgtOutBox( 'Impossible writing results file in ' .. sResultFile, 'Error', 'ERROR')
-   end
-
-end
-
---------------------------------------------------------------------
-return RunMachiningParamCalc
@@ -1,57 +0,0 @@
-- RunMachiningParamEdit.lua by Egaltech s.r.l. 2022/04/05
-- Gestione visualizzazione per Stampa 3d
-
-- Tabella per definizione modulo
-local RunMachiningParamEdit = {}
-
-- Intestazioni
-require( 'EgtBase')
-
-EgtOutLog( ' RunMachiningParamEdit started', 1)
-
-- Costanti generali
-local AMD = require( 'AddManData')
-
---------------------------------------------------------------------
-function RunMachiningParamEdit.Exec()
-   -- recupero cartella delle lavorazioni
-   local sCalcBaseDir = EgtGetStringFromIni( '3dPrinting', 'BaseDir', 'C:\\ProgramData\\Egaltech\\EgtCam5\\3dPrinting', EgtGetIniFile())
-   local sMachiningDirPath = sCalcBaseDir .. '\\Machinings\\'
-
-   -- recupero file delle lavorazioni
-   --local Machinings = {}
-   local sMachinings = ''
-
-   local f = io.popen("dir " .. sMachiningDirPath .. " /B", "r")
-   for entry in f:lines() do
-      --Machinings[#Machinings + 1] = entry
-      local sDir, sFile, sExt = EgtSplitPath(entry)
-      if sExt == '.ini' then
-         if sMachinings ~= "" then
-            sMachinings = sMachinings .. ','
-         end
-         sMachinings = sMachinings .. sFile
-      end
-   end
-
-   -- chiedo quale file aprire
-   MachiningValues = EgtDialogBox( 'Machinings edit', { 'Machining', 'CB:' .. sMachinings})
-   if not MachiningValues or #MachiningValues < 1 then return end
-
-   -- verifico esistenza file
-   local sSelMachiningPath = sMachiningDirPath .. MachiningValues[1] .. '.ini'
-   if not EgtExistsFile( sSelMachiningPath) then
-      EgtOutBox( 'Machining file not found', 'Error', 'ERROR')
-      return
-   end
-
-   -- apro programma di edit
-   local sEditProgPath = EgtGetStringFromIni( '3dPrinting', 'MachiningEditProg', "", EgtGetIniFile())
-   if not sEditProgPath or not EgtWinExec( '"'..sEditProgPath..'" "'.. sSelMachiningPath..'"') then
-      EgtOutBox( 'Impossible opening software to show Machining. You can find it in ' .. sSelMachiningPath, 'Error', 'ERROR')
-   end
-
-end
-
---------------------------------------------------------------------
-return RunMachiningParamEdit
@@ -1,56 +0,0 @@
-- RunMaterialParamEdit.lua by Egaltech s.r.l. 2022/04/09
-- Gestione edit parametri materiali per Stampa 3d
-
-- Tabella per definizione modulo
-local RunMaterialParamEdit = {}
-
-- Intestazioni
-require( 'EgtBase')
-
-EgtOutLog( ' RunMaterialParamEdit started', 1)
-
-- Costanti generali
-local AMD = require( 'AddManData')
-
---------------------------------------------------------------------
-function RunMaterialParamEdit.Exec()
-   -- recupero cartella dei materiali
-   local sCalcBaseDir = EgtGetStringFromIni( '3dPrinting', 'BaseDir', 'C:\\ProgramData\\Egaltech\\EgtCam5\\3dPrinting', EgtGetIniFile())
-   local sMaterialDirPath = sCalcBaseDir .. '\\Materials\\'
-
-   -- recupero elenco file dei materiali
-   local Files = EgtFindAllFiles( sMaterialDirPath..'*.csv')
-   if not Files then
-      EgtOutBox( 'Material files not found', 'Error', 'ERROR')
-      return
-   end
-   local sMaterials = ''
-   for i = 1, #Files do
-      local sDir, sFile, sExt = EgtSplitPath( Files[i])
-      if sMaterials ~= "" then
-         sMaterials = sMaterials .. ','
-      end
-      sMaterials = sMaterials .. sFile
-   end
-
-   -- chiedo quale file aprire
-   MaterialValues = EgtDialogBox( 'Materials edit', { 'Material', 'CB:' .. sMaterials})
-   if not MaterialValues or #MaterialValues < 1 then return end
-
-   -- verifico esistenza file
-   local sSelMaterialPath = sMaterialDirPath .. MaterialValues[1] .. '.csv'
-   if not EgtExistsFile( sSelMaterialPath) then
-      EgtOutBox( 'Material file not found', 'Error', 'ERROR')
-      return
-   end
-
-   -- apro programma di edit
-   local sEditProgPath = EgtGetStringFromIni( '3dPrinting', RESULT_READ_PROG, "", EgtGetIniFile())
-   if not sEditProgPath or not EgtWinExec( '"'..sEditProgPath..'" "'..sSelMaterialPath..'"') then
-      EgtOutBox( 'Impossible opening software to show Material. You can find them it in ' .. sSelMaterialPath, 'Error', 'ERROR')
-   end
-
-end
-
---------------------------------------------------------------------
-return RunMaterialParamEdit
@@ -1,209 +0,0 @@
-- RunPartPositioning.lua by Egaltech s.r.l. 2022/08/29
-- Gestione calcolo disposizione e lavorazioni per stampa 3d
-- 2022/03/21 Creazione file
-
-- Tabella per definizione modulo
-local RunPartPositioning = {}
-
-- Intestazioni
-require( 'EgtBase')
-
-EgtOutLog( ' RunPartPositioning started', 1)
-
-- Costanti generali
-local AMD = require( 'AddManData')
-
---------------------------------------------------------------------
-function RunPartPositioning.Exec()
-   -- Verifico che la macchina corrente sia adatta alla stampa 3d
-   local sMachIni = EgtGetCurrMachineDir() .. '\\' .. EgtGetCurrMachineName() .. '.ini'
-   local sMachMaterial = EgtGetStringFromIni( 'General', 'Material', '', sMachIni)
-   if sMachMaterial ~= 'Additive' then
-      EgtOutBox( 'Current machine unsuitable for additive manufacturing', 'Warning', 'WARNING')
-      return
-   end
-   -- Recupero ultimo oggetto selezionato
-   local nSolidId = EgtGetLastSelectedObj()
-   local nLayerId = EgtGetParent( nSolidId)
-   local nPartId = EgtGetParent( nLayerId)
-   -- Verifico sia in un pezzo valido
-   if nPartId then
-      if EgtIsPart( nPartId) then
-         local sName = EgtGetName( nPartId)
-         if sName == TABLE then 
-            EgtOutBox( 'No selected part. Please select a part before moving it on the table.', 'Warning', 'WARNING')
-            return
-         end
-         local sLayer = EgtGetName( nLayerId)
-         if sLayer == LAY_RIBS or sLayer == LAY_AUX_SOLIDS or sLayer == LAY_SHELL_NBR then
-            EgtOutBox( 'No selected solid. Please select a solid before moving it on the table.', 'Warning', 'WARNING')
-            return
-         end
-      else
-         EgtOutBox( 'No selected part. Please select a part before moving it on the table.', 'Warning', 'WARNING')
-         return
-      end
-   else
-      EgtOutBox( 'No selected part. Please select a part before moving it on the table.', 'Warning', 'WARNING')
-      return
-   end
-
-   -- Assegno nome pezzo e layer
-   if not EgtGetName( nPartId) then
-      local nPartIndex = 1
-      while EgtGetFirstNameInGroup( GDB_ID.ROOT, PART .. nPartIndex) do
-         nPartIndex = nPartIndex + 1
-      end
-      EgtSetName( nPartId, PART .. nPartIndex)
-      EgtSetName( nLayerId, PRINT_SOLID)
-   end
-   -- Recupero o creo layer ausiliario
-   local nAuxId = EgtGetFirstNameInGroup( nPartId, LAY_AUX)
-   if not nAuxId then
-      nAuxId = EgtGroup( nPartId)
-      EgtSetName( nAuxId, LAY_AUX)
-   else
-      EgtEmptyGroup( nAuxId)
-   end
-   
-   -- Rimuovo eventuale gruppo di lavoro
-   local nMchGrpId = EgtGetMachGroupId( '3dPrint')
-   EgtRemoveMachGroup( nMchGrpId or GDB_ID.NULL)  
-
-   -- Recupero dati tavola (creando gruppo di lavoro temporaneo)
-   local nQqqId = EgtAddMachGroup( 'qqq')
-   EgtSetTable( 'Tab')
-   local b3Tab = EgtGetTableArea()
-   dTabX = b3Tab:getDimX()
-   dTabY = b3Tab:getDimY()
-   EgtRemoveMachGroup( nQqqId or GDB_ID.NULL)
-   
-   -- Richiedo posizione origine e offset pezzo
-   local b3Solid = EgtGetBBoxGlob( nSolidId, GDB_BB.EXACT)
-   local b3Part = EgtGetBBoxGlob( nPartId, GDB_BB.EXACT)
-   local nRefX = 1
-   local nRefY = 1
-   local dPosX = b3Tab:getDimX() / 2 - b3Solid:getDimX() / 2
-   local dPosY = b3Tab:getDimY() / 2 - b3Solid:getDimY() / 2
-   local Positions = EgtDialogBox( 'Part position on table:', { 'Reference', 'CB:Left,Center,Right'},
-                                                              { '', 'CB:Bottom,Middle,Top'},
-                                                              { 'X', EgtNumToString( EgtToUiUnits( dPosX), 1)},
-                                                              { 'Y', EgtNumToString( EgtToUiUnits( dPosY), 1)})
-   if not Positions then return end
-   dPosX = EgtFromUiUnits( tonumber( Positions[3]))
-   dPosY = EgtFromUiUnits( tonumber( Positions[4]))
-   if Positions[1] == 'Center' then
-      nRefX = 2
-      dPosX = dPosX - b3Solid:getDimX() / 2
-   elseif Positions[1] == 'Right' then
-      nRefX = 3
-      dPosX = dPosX - b3Solid:getDimX()
-   end
-   if Positions[2] == 'Middle' then
-      nRefY = 2
-      dPosY = dPosY - b3Solid:getDimY() / 2
-   elseif Positions[2] == 'Top' then
-      nRefY = 3
-      dPosY = dPosY - b3Solid:getDimY()
-   end
-
-   -- Creo disegno tavola
-   local nTabPart = EgtGetFirstNameInGroup( GDB_ID.ROOT, TABLE)
-   EgtErase( nTabPart)
-   -- Disegno tavola
-   nTabPart = EgtGroup( GDB_ID.ROOT)
-   EgtSetMode( nTabPart, GDB_MD.LOCKED)
-   EgtSetLevel( nTabPart, GDB_LV.SYSTEM)
-   EgtSetName( nTabPart, TABLE)
-   local nTabLayer = EgtGroup( nTabPart)
-   EgtSetName( nTabLayer, TABLE)
-   local nTabOutlineId = EgtRectangle2P( nTabLayer, Point3d( 0, 0, 0), Point3d( dTabX, dTabY, 0))
-   local nTabSurfId = EgtSurfFlatRegion( nTabLayer, nTabOutlineId)
-   EgtSetColor( nTabSurfId, 'GRAY')
-   EgtSetAlpha( nTabSurfId, 70)
-
-   -- Aggiungo il box del solido
-   local nBoxId = EgtSurfTmBBox( nAuxId, b3Solid, false, GDB_RT.GLOB) 
-
-   -- Posiziono il pezzo e aggiorno il suo box
-   local vtMove = Point3d( dPosX, dPosY, 0) - b3Solid:getMin()
-   EgtMove( nPartId, vtMove)
-   b3Solid:move( vtMove)
-   b3Part:move( vtMove)
-
-   -- Creo il frame del pezzo
-   local ptOrig = b3Solid:getMin()
-   if nRefX == 2 then
-      ptOrig = ptOrig + b3Solid:getDimX() / 2 * X_AX()
-   elseif nRefX == 3 then
-      ptOrig = ptOrig + b3Solid:getDimX() * X_AX()
-   end
-   if nRefY == 2 then
-      ptOrig = ptOrig + b3Solid:getDimY() / 2 * Y_AX()
-   elseif nRefY == 3 then
-      ptOrig = ptOrig + b3Solid:getDimY() * Y_AX()
-   end
-   
-    -- Svuoto o creo layer per il frame
-   local nFrameLay = EgtGetFirstNameInGroup( nPartId, LAY_FRAME)
-   if not nFrameLay then
-      nFrameLay = EgtGroup( nPartId)
-      EgtSetName( nFrameLay, LAY_FRAME)
-   else
-      EgtEmptyGroup( nFrameLay)
-   end
-   
-   local frPart = Frame3d( ptOrig, Z_AX())
-   nFrameId = EgtFrame( nFrameLay, frPart, GDB_RT.GLOB)
-   if nFrameId then
-      EgtSetName( nFrameId, FRAME_PART)
-      EgtSetMode( nFrameId, GDB_MD.LOCKED)
-   end
-
-   -- Definisco e posiziono il grezzo sulla tavola
-   EgtAddMachGroup( '3dPrint')
-   EgtSetTable( 'Tab')
-
-   local nRawId = EgtAddRawPartWithPart( nPartId, nBoxId, 0,  Color3d( 128, 128, 128, 30)) 
-   EgtMoveToCornerRawPart( nRawId, Point3d( dPosX, dPosY, 0), MCH_CR.BL)
-
-   EgtResetCurrMachGroup()
-
-   -- Recupero/creo gruppo per punti e curve di partenza
-   local nMachStartId = EgtGetFirstNameInGroup( nPartId, LAY_MACH_START)
-   if not nMachStartId then
-      nMachStartId = EgtGroup( nPartId)
-      EgtSetName( nMachStartId, LAY_MACH_START)
-   end
-
-   local vStartId = EgtGetNameInGroup( nLayerId, START_GEOM)
-   if vStartId then
-      for j = 1, #vStartId do
-         EgtRelocateGlob( vStartId[j], nMachStartId)
-         EgtSetColor( vStartId[j], EgtStdColor( "RED"))
-      end      
-   else
-      -- se non ci sono punti/curve di inizio definiti e non ve ne sono nemmeno nel gruppo, creo un punto
-      local vOldStart = EgtGetNameInGroup( nMachStartId, START_GEOM)
-      if not vOldStart then
-         local ptStart = b3Solid:getCenter() - 0.6 * b3Solid:getDimY() * Y_AX() - 0.5 * b3Solid:getDimZ() * Z_AX()
-         nPtStartId = EgtPoint( nMachStartId, ptStart, GDB_RT.GLOB)
-         EgtSetName( nPtStartId, START_GEOM)
-         EgtSetColor( nPtStartId, EgtStdColor( "RED"))
-      end
-   end 
-
-   -- Dichiaro pezzo posizionato
-   EgtSetInfo( nPartId, KEY_PART_ON_TABLE, 1)
-
-   -- Deseleziono tutto
-   EgtDeselectAll()
-
-   EgtSetView( SCE_VD.ISO_SW, false)
-   EgtZoom( SCE_ZM.ALL)
-
-   EgtOutLog( ' +++ RunPartPositioning completed')
-end
-
---------------------------------------------------------------------
-return RunPartPositioning
@@ -1,138 +0,0 @@
-- RunShowManager.lua by Egaltech s.r.l. 2022/09/15
-- Gestione visualizzazione per Stampa 3d
-
-- Tabella per definizione modulo
-local RunShowManager = {}
-
-- Intestazioni
-require( 'EgtBase')
-
-EgtOutLog( ' RunShowManager started', 1)
-
-- Costanti generali
-local AMD = require( 'AddManData')
-
-- Librerie
-_G.package.loaded.RunCalcSolids = nil
-local CSOLIDS = require( 'RunCalcSolids')
-
---------------------------------------------------------------------
-local function ShowImportedSolid( nPartId, bShow)
-   local nSolidLayId = EgtGetFirstNameInGroup( nPartId, PRINT_SOLID)
-   EgtSetStatus( nSolidLayId or GDB_ID.NULL, EgtIf( bShow, GDB_ST.ON, GDB_ST.OFF))
-   local nRibsLayId = EgtGetFirstNameInGroup( nPartId, LAY_RIBS)
-   EgtSetStatus( nRibsLayId or GDB_ID.NULL, EgtIf( bShow, GDB_ST.ON, GDB_ST.OFF))
-   local nShellNbrLay = EgtGetFirstNameInGroup( nPartId, LAY_SHELL_NBR)
-   EgtSetStatus( nShellNbrLay or GDB_ID.NULL, EgtIf( bShow, GDB_ST.ON, GDB_ST.OFF))
-   local nAuxSolidsLay = EgtGetFirstNameInGroup( nPartId, LAY_AUX_SOLIDS)
-   EgtSetStatus( nAuxSolidsLay or GDB_ID.NULL, EgtIf( bShow, GDB_ST.ON, GDB_ST.OFF))
-end
-
---------------------------------------------------------------------
-function RunShowManager.Exec()
-   -- Verifico esistenza gruppo stato visualizzazione progetto
-   local nViewId = EgtGetFirstNameInGroup( GDB_ID.ROOT, VIEWPARAMS)
-   local bImportedSolid = false
-   local bOuterCrv = false
-   local bPath = false
-   local bSolid = false
-   local bToolPath = false
-
-   if not nViewId then
-      nViewId = EgtGroup( GDB_ID.ROOT)
-      EgtSetName( nViewId, VIEWPARAMS)
-      EgtSetLevel( nViewId, GDB_LV.SYSTEM)
-   else
-      bImportedSolid = EgtGetInfo( nViewId, IMPORTED_SOLID, 'b')
-      bOuterCrv = EgtGetInfo( nViewId, OUTER_CRV, 'b')
-      bPath = EgtGetInfo( nViewId, PATH_GRP, 'b')
-      bSolid = EgtGetInfo( nViewId, SOLID_GRP, 'b')
-      bToolPath = EgtGetInfo( nViewId, TOOLPATH_GRP, 'b')
-   end
-
-   local bCurrImportedSolid = bImportedSolid
-   local bCurrOuterCrv = bOuterCrv
-   local bCurrPath = bPath
-   local bCurrSolid = bSolid
-   local bCurrToolPath = bToolPath
-
-   if EgtGetUserLevel() == 1 then
-      local ViewValues = EgtDialogBox( 'Show Manager', { 'Imported Solid', 'CK:' .. EgtIf( bImportedSolid, '1', '0')},
-                                                       { 'Solid', 'CK:' .. EgtIf( bSolid, '1', '0')},
-                                                       { 'ToolPath', 'CK:' .. EgtIf( bToolPath, '1', '0')})
-      if not ViewValues or #ViewValues < 3 then return end
-      bCurrImportedSolid = ( ViewValues[1] == '1')
-      bCurrSolid = ( ViewValues[2] == '1')
-      bCurrToolPath = ( ViewValues[3] == '1')
-   else
-      local ViewValues = EgtDialogBox( 'Show Manager', { 'Imported Solid', 'CK:' .. EgtIf( bImportedSolid, '1', '0')},
-                                                       { 'OuterCrv', 'CK:' .. EgtIf( bOuterCrv, '1', '0')},
-                                                       { 'Path', 'CK:' .. EgtIf( bPath, '1', '0')},
-                                                       { 'Solid', 'CK:' .. EgtIf( bSolid, '1', '0')},
-                                                       { 'ToolPath', 'CK:' .. EgtIf( bToolPath, '1', '0')})
-      if not ViewValues or #ViewValues < 5 then return end
-      bCurrImportedSolid = ( ViewValues[1] == '1')
-      bCurrOuterCrv = ( ViewValues[2] == '1')
-      bCurrPath = ( ViewValues[3] == '1')
-      bCurrSolid = ( ViewValues[4] == '1')
-      bCurrToolPath = ( ViewValues[5] == '1')
-   end
-
-   -- ciclo sui pezzi
-   local nPartIndex = 1
-   local nPartId = EgtGetFirstNameInGroup( GDB_ID.ROOT, PART .. nPartIndex)
-   while nPartId do
-      -- eventuale calcolo dei solidi
-      local bHasSolids = EgtGetInfo( nPartId, KEY_HAS_SOLIDS, 'b') or false
-      if not bHasSolids and bCurrSolid then
-         EgtSetInfo( nPartId, KEY_CALC_SOLIDS, true)
-         CSOLIDS.Exec()
-      end
-      
-      if bImportedSolid ~= bCurrImportedSolid then
-         ShowImportedSolid( nPartId, bCurrImportedSolid)
-      end
-      -- ciclo sui layer per dis/attivare il resto
-      local nLayerIndex = 1
-      local nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex) or EgtGetFirstNameInGroup( nPartId, "__" .. SLICE_LAYER .. nLayerIndex)
-      while nLayerId do
-         local nCrvId = EgtGetFirstGroupInGroup( nLayerId)
-         while nCrvId do
-            if bOuterCrv ~= bCurrOuterCrv then
-               local nOuterCrvId = EgtGetFirstNameInGroup( nCrvId, OUTER_CRV)
-               EgtSetStatus( nOuterCrvId or GDB_ID.NULL, EgtIf( bCurrOuterCrv, GDB_ST.ON, GDB_ST.OFF))
-            end
-            if bPath ~= bCurrPath then
-               local nPathId = EgtGetFirstNameInGroup( nCrvId, PATH_GRP)
-               EgtSetStatus( nPathId or GDB_ID.NULL, EgtIf( bCurrPath, GDB_ST.ON, GDB_ST.OFF))
-            end
-            if bSolid ~= bCurrSolid then
-               local nSolidId = EgtGetFirstNameInGroup( nCrvId, SOLID_GRP)
-               EgtSetStatus( nSolidId or GDB_ID.NULL, EgtIf( bCurrSolid, GDB_ST.ON, GDB_ST.OFF))
-            end
-            if bToolPath ~= bCurrToolPath then
-               local nToolPathId = EgtGetFirstNameInGroup( nCrvId, TOOLPATH_GRP)
-               EgtSetStatus( nToolPathId or GDB_ID.NULL, EgtIf( bCurrToolPath, GDB_ST.ON, GDB_ST.OFF))
-            end
-            nCrvId = EgtGetNext( nCrvId)
-         end
-         nLayerIndex = nLayerIndex + 1
-         nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex) or EgtGetFirstNameInGroup( nPartId, "__" .. SLICE_LAYER .. nLayerIndex)
-      end
-      nPartIndex = nPartIndex + 1
-      nPartId = EgtGetFirstNameInGroup( GDB_ID.ROOT, PART .. nPartIndex)
-   end
-
-   -- riporto impostazioni in gruppo apposito
-   EgtSetInfo( nViewId, IMPORTED_SOLID, bCurrImportedSolid)
-   EgtSetInfo( nViewId, OUTER_CRV, bCurrOuterCrv)
-   EgtSetInfo( nViewId, PATH_GRP, bCurrPath)
-   EgtSetInfo( nViewId, SOLID_GRP, bCurrSolid)
-   EgtSetInfo( nViewId, TOOLPATH_GRP, bCurrToolPath)
-
-   EgtDraw()
-
-end
-
---------------------------------------------------------------------
-return RunShowManager
@@ -1,186 +0,0 @@
-- RunSliceAdvancement.lua by Egaltech s.r.l. 2022/06/28
-- Gestione visualizzazione per Stampa 3d
-
-- Tabella per definizione modulo
-local RunSliceAdvancement = {}
-
-- Intestazioni
-require( 'EgtBase')
-
-EgtOutLog( ' RunSliceAdvancement started', 1)
-
-- Costanti generali
-local AMD = require( 'AddManData')
-
-- Librerie
-_G.package.loaded.RunCalcSolids = nil
-local CSOLIDS = require( 'RunCalcSolids')
-
---------------------------------------------------------------------
-local function ManageSegmentVisibility( SegmentList, nLastActiveIndex, ToHideList)
-   for Index = 1, #SegmentList do
-      EgtSetStatus( SegmentList[Index], EgtIf( Index <= nLastActiveIndex, GDB_ST.ON, GDB_ST.OFF))
-   end
-   if ToHideList and #ToHideList > 0 then
-      for Index = 1, #ToHideList do
-         EgtSetStatus( ToHideList[Index], GDB_ST.OFF)
-      end
-   end
-end
-
---------------------------------------------------------------------
-local function CalcType( nEntId, nOldType)
-   local nType = EgtGetInfo( nEntId, KEY_TYPE, 'i')
-   if not nType or nType == TYPE.LINK or nType == TYPE.COASTING  or nType == TYPE.WIPE then
-      nType = nOldType
-   end
-   if nType == TYPE.RIB or nType == TYPE.AUX_SOLID then
-      nType = TYPE.INFILL
-   end
-   if nType == TYPE.EXTRA_SHELL then
-      nType = TYPE.INNER_SHELL
-   end
-   return nType
-end
-
---------------------------------------------------------------------
-function RunSliceAdvancement.Exec()
-   -- verifico ci sia almeno uno slice
-   local nFirstPartId = EgtGetFirstNameInGroup( GDB_ID.ROOT, PART .. 1)
-   if not nFirstPartId then 
-      EgtOutBox( 'No sliced part in this project!', 'Error', 'ERROR')
-      return
-   else
-      local nLayerId = EgtGetFirstNameInGroup( nFirstPartId, SLICE_LAYER .. 1) or EgtGetFirstNameInGroup( nFirstPartId, "__" .. SLICE_LAYER .. 1)
-      if not nLayerId then
-         EgtOutBox( 'No sliced part in this project!', 'Error', 'ERROR')
-         return
-      end
-   end
-   local nAdvancementType = 1     -- 1 = All, 2 = Only Outer, 3 = Only Inner, 4 = Only Infill
-   local nPercentage = 30
-   -- leggo ultimi valori
-   local nViewId = EgtGetFirstNameInGroup( GDB_ID.ROOT, VIEWPARAMS)
-   if nViewId then
-      nAdvancementType = EgtGetInfo( nViewId, KEY_SLICE_ADV_MODE, 'i') or SLICE_ADV_TYPE.ALL
-      nPercentage = EgtGetInfo( nViewId, KEY_SLICE_ADV_PERC, 'i') or 30
-   end
-   local sAdvTypeCombo = ''
-   if nAdvancementType == SLICE_ADV_TYPE.ALL then
-      sAdvTypeCombo = 'CB:*All,Only Outer,Only Inner,Only Infill'
-   elseif nAdvancementType == SLICE_ADV_TYPE.OUTER then
-      sAdvTypeCombo = 'CB:All,*Only Outer,Only Inner,Only Infill'
-   elseif nAdvancementType == SLICE_ADV_TYPE.INNER then
-      sAdvTypeCombo = 'CB:All,Only Outer,*Only Inner,Only Infill'
-   elseif nAdvancementType == SLICE_ADV_TYPE.INFILL then
-      sAdvTypeCombo = 'CB:All,Only Outer,Only Inner,*Only Infill'
-   end
-   ViewValues = EgtDialogBox( 'Slice advancement', { 'Type', sAdvTypeCombo},
-                                                   { 'Percentage (0-100)', tostring( nPercentage)})
-   if not ViewValues or #ViewValues < 1 then return end
-
-   if ViewValues[1] == 'All' then
-      nAdvancementType = SLICE_ADV_TYPE.ALL
-   elseif ViewValues[1] == 'Only Outer' then
-      nAdvancementType = SLICE_ADV_TYPE.OUTER
-   elseif ViewValues[1] == 'Only Inner' then
-      nAdvancementType = SLICE_ADV_TYPE.INNER
-   elseif ViewValues[1] == 'Only Infill' then
-      nAdvancementType = SLICE_ADV_TYPE.INFILL
-   end
-   nPercentage = tonumber( ViewValues[2])
-
-   -- ciclo sui pezzi
-   local nPartIndex = 1
-   local nPartId = EgtGetFirstNameInGroup( GDB_ID.ROOT, PART .. nPartIndex)
-   while nPartId do
-      
-      -- eventuale calcolo dei solidi
-      local bHasSolids = EgtGetInfo( nPartId, KEY_HAS_SOLIDS, 'b') or false
-      if not bHasSolids then
-         EgtSetInfo( nPartId, KEY_CALC_SOLIDS, true)
-         CSOLIDS.Exec()
-      end
-      
-      local nPrintOrder = EgtGetInfo( nPartId, KEY_PRINT_ORDER, 'i')
-      -- ciclo sui layer per dis/attivare il resto
-      local nLayerIndex = 1
-      local nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex) or EgtGetFirstNameInGroup( nPartId, "__" .. SLICE_LAYER .. nLayerIndex)
-      while nLayerId do
-         local nCrvId = EgtGetFirstGroupInGroup( nLayerId)
-         while nCrvId do
-            local nSolidId = EgtGetFirstNameInGroup( nCrvId, SOLID_GRP)
-            local ShellList = { {}, {}, {}}
-            local nSurfId = EgtGetFirstInGroup( nSolidId)
-            local nOldType = TYPE.OUTER_SHELL
-            while nSurfId do
-               local nType = CalcType( nSurfId, nOldType)
-               nOldType = nType
-               table.insert( ShellList[nType], nSurfId)
-               nSurfId = EgtGetNext( nSurfId)
-            end
-            local nSegmentQty = 1
-            local SegmentList
-            local ToHideList
-            if nAdvancementType == SLICE_ADV_TYPE.ALL then
-               nSegmentQty = #ShellList[1] + #ShellList[2] + #ShellList[3]
-               if nPrintOrder == PRINT_ORDER.EXT_INT_INF then
-                  SegmentList = ShellList[1]
-                  for i = 1, #ShellList[2] do
-                     SegmentList[#SegmentList + 1] = ShellList[2][i]
-                  end
-                  for i = 1, #ShellList[3] do
-                     SegmentList[#SegmentList + 1] = ShellList[3][i]
-                  end
-               else
-                  SegmentList = ShellList[3]
-                  for i = 1, #ShellList[2] do
-                     SegmentList[#SegmentList + 1] = ShellList[2][i]
-                  end
-                  for i = 1, #ShellList[1] do
-                     SegmentList[#SegmentList + 1] = ShellList[1][i]
-                  end
-               end
-            elseif nAdvancementType == SLICE_ADV_TYPE.OUTER then
-               nSegmentQty = #ShellList[1]
-               SegmentList = ShellList[1]
-               ToHideList = ShellList[2]
-               for i = 1, #ShellList[3] do
-                  ToHideList[#ToHideList + 1] = ShellList[3][i]
-               end
-            elseif nAdvancementType == SLICE_ADV_TYPE.INNER then
-               nSegmentQty = #ShellList[2]
-               SegmentList = ShellList[2]
-               ToHideList = ShellList[1]
-               for i = 1, #ShellList[3] do
-                  ToHideList[#ToHideList + 1] = ShellList[3][i]
-               end
-            elseif nAdvancementType == SLICE_ADV_TYPE.INFILL then
-               nSegmentQty = #ShellList[3]
-               SegmentList = ShellList[3]
-               ToHideList = ShellList[1]
-               for i = 1, #ShellList[2] do
-                  ToHideList[#ToHideList + 1] = ShellList[2][i]
-               end
-            end
-            local nLastActiveIndex = ceil( nSegmentQty * nPercentage / 100)
-            ManageSegmentVisibility( SegmentList, nLastActiveIndex, ToHideList)
-            nCrvId = EgtGetNext( nCrvId)
-         end
-         nLayerIndex = nLayerIndex + 1
-         nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex) or EgtGetFirstNameInGroup( nPartId, "__" .. SLICE_LAYER .. nLayerIndex)
-      end
-      nPartIndex = nPartIndex + 1
-      nPartId = EgtGetFirstNameInGroup( GDB_ID.ROOT, PART .. nPartIndex)
-   end
-
-   -- riporto impostazioni in gruppo apposito
-   EgtSetInfo( nViewId, KEY_SLICE_ADV_MODE, nAdvancementType)
-   EgtSetInfo( nViewId, KEY_SLICE_ADV_PERC, nPercentage)
-
-   EgtDraw()
-
-end
-
---------------------------------------------------------------------
-return RunSliceAdvancement
@@ -1,113 +0,0 @@
-- RunSlicePalette.lua by Egaltech s.r.l. 2022/08/23
-- Gestione visualizzazione per Stampa 3d
-
-- Tabella per definizione modulo
-local RunSlicePalette = {}
-
-- Intestazioni
-require( 'EgtBase')
-
-EgtOutLog( ' RunSlicePalette started', 1)
-
-- Costanti generali
-local AMD = require( 'AddManData')
-
-- Librerie
-_G.package.loaded.RunCalcSolids = nil
-local CSOLIDS = require( 'RunCalcSolids')
-
---------------------------------------------------------------------
-function RunSlicePalette.UpdateColors( nPaletteType)
-   -- ciclo sui pezzi
-   local nPartIndex = 1
-   local nPartId = EgtGetFirstNameInGroup( GDB_ID.ROOT, PART .. nPartIndex)
-   while nPartId do
-      -- eventuale calcolo dei solidi
-      local bHasSolids = EgtGetInfo( nPartId, KEY_HAS_SOLIDS, 'b') or false
-      if not bHasSolids then
-         EgtSetInfo( nPartId, KEY_CALC_SOLIDS, true)
-         CSOLIDS.Exec()
-      end
-      
-      -- ciclo sui layer per dis/attivare il resto
-      local nLayerIndex = 1
-      local nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex)
-      while nLayerId do
-         local nCrvId = EgtGetFirstGroupInGroup( nLayerId)
-         while nCrvId do
-            local nSolidId = EgtGetFirstNameInGroup( nCrvId, SOLID_GRP)
-            local nSurfId = EgtGetFirstInGroup( nSolidId)
-            local nOldType = 0
-            while nSurfId do
-               local Color = EgtStdColor( 'GRAY') 
-               if nPaletteType == PALETTE_TYPE.IN_OUT then
-                  local nType = EgtGetInfo( nSurfId, KEY_TYPE, 'i')
-                  if not nType or nType < TYPE.OUTER_SHELL or nType > TYPE.AUX_SOLID then nType = nOldType end
-                  nOldType = nType
-                  -- scelta del colore
-                  if nType == TYPE.OUTER_SHELL or nType == TYPE.EXTRA_OUTER_SHELL then
-                     Color = EgtStdColor( 'TEAL')
-                  elseif nType == TYPE.INNER_SHELL or nType == TYPE.EXTRA_SHELL then
-                     Color = EgtStdColor( 'ORANGE')
-                  elseif nType == TYPE.INFILL then
-                     Color = EgtStdColor( 'YELLOW')
-                  elseif nType == TYPE.LINK then
-                     Color = EgtStdColor( 'GRAY')
-                  elseif nType == TYPE.COASTING then
-                     Color = EgtStdColor( 'BLUE')
-                  elseif nType == TYPE.WIPE then
-                     Color = EgtStdColor( 'LIME')
-                  elseif nType == TYPE.RIB then
-                     Color = EgtStdColor( 'OLIVE')
-                  elseif nType == TYPE.AUX_SOLID then
-                     Color = EgtStdColor( 'AQUA')
-                  end
-               else
-                  local nResult = EgtGetInfo( nLayerId, KEY_RESULT, 'i')
-                  if nResult == RESULT.OK then 
-                     Color = EgtStdColor( 'GREEN')
-                  elseif nResult == RESULT.KO_MINUS then
-                     Color = EgtStdColor( 'ORANGE')
-                  elseif nResult == RESULT.KO_PLUS then
-                     Color = EgtStdColor( 'RED')
-                  end
-               end
-               EgtSetColor( nSurfId, Color)
-               nSurfId = EgtGetNext( nSurfId)
-            end
-            nCrvId = EgtGetNext( nCrvId)
-         end
-         nLayerIndex = nLayerIndex + 1
-         nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex)
-      end
-      nPartIndex = nPartIndex + 1
-      nPartId = EgtGetFirstNameInGroup( GDB_ID.ROOT, PART .. nPartIndex)
-   end
-
-   EgtDraw()
-
-end
-
---------------------------------------------------------------------
-function RunSlicePalette.Exec()
-
-   local nViewId = EgtGetFirstNameInGroup( GDB_ID.ROOT, VIEWPARAMS) or GDB_ID.NULL
-
-   local nOldPaletteType = EgtGetInfo( nViewId, KEY_PALETTE, 'i')
-   local sCombo = EgtIf( not nOldPaletteType or nOldPaletteType == 1, 'CB:*In/Out,Results', 'CB:In/Out,*Results')
-   ViewValues = EgtDialogBox( 'Slice Palette', { 'Type', sCombo})
-   if not ViewValues or #ViewValues < 1 then return end
-
-   local nPaletteType = PALETTE_TYPE.IN_OUT     -- 1 = In/Out, 2 = Results
-   if ViewValues[1] == 'In/Out' then
-      nPaletteType = PALETTE_TYPE.IN_OUT
-   elseif ViewValues[1] == 'Results' then
-      nPaletteType = PALETTE_TYPE.RESULTS
-   end
-   EgtSetInfo( nViewId, KEY_PALETTE, nPaletteType)
-
-   RunSlicePalette.UpdateColors( nPaletteType)
-end
-
---------------------------------------------------------------------
-return RunSlicePalette
@@ -26,177 +26,33 @@ _G.package.loaded.CalcToolPath = nil
 local CTP = require( 'CalcToolPath')

 ---------------------------------------------------------------------
-local function SetParamInfo( sFile, nParamsGrp, sSection, sKey, sDefaultVal)
-   local sVal = EgtGetStringFromIni( sSection, sKey, sDefaultVal, sFile)
-   EgtSetInfo( nParamsGrp, sKey, sVal)
-end
-
---------------------------------------------------------------------
-local function LoadParams( sFile, nPartId)
-
-   EgtSetInfo( nPartId, KEY_PARAMS, sFile)
-
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_CALC_SOLIDS, '0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_SLICING_45, '0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_SLICE_STEP, '1.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_STRAND, '6.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_SHELLS_NBR, '3')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_STRAND_OVERLAP, '0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_OFFSET_SLICE, '0.0')
-   
-   local sStrandOrder = EgtGetStringFromIni( SEC_DEFAULT, KEY_PRINT_ORDER, 'InToOut', sFile)
-   if sStrandOrder == 'OutToIn' then
-      EgtSetInfo( nPartId, KEY_PRINT_ORDER, PRINT_ORDER.EXT_INT_INF)
-   else            -- 'InToOut' 
-      EgtSetInfo( nPartId, KEY_PRINT_ORDER, PRINT_ORDER.INF_INT_EXT)
-   end
-
-   local sStrandDirection = EgtGetStringFromIni( SEC_DEFAULT, KEY_PRINT_DIRECTION, 'CCW', sFile)
-   if sStrandDirection == 'CW' then
-      EgtSetInfo( nPartId, KEY_PRINT_DIRECTION, PRINT_DIRECTION.CW)
-   else                 -- 'CCW'
-      EgtSetInfo( nPartId, KEY_PRINT_DIRECTION, PRINT_DIRECTION.CCW)
-   end
-
-   local sLinkType = EgtGetStringFromIni( SEC_DEFAULT, KEY_LINK_TYPE, 'None', sFile)
-   if sLinkType == 'None' then
-      EgtSetInfo( nPartId, KEY_LINK_TYPE, LINK_TYPE.NONE)
-   elseif sLinkType == 'BiArc' then
-      EgtSetInfo( nPartId, KEY_LINK_TYPE, LINK_TYPE.BIARC)
-   else         -- 'Linear' 
-      EgtSetInfo( nPartId, KEY_LINK_TYPE, LINK_TYPE.LINEAR)
-   end
-
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_SP_OFFSET_ON_SLICE, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_LINK_PARAM, '0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_LINK_ZUP, '0')
-   
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_FLOOR_NBR, '0')
-   local sFloorInfill = EgtGetStringFromIni( SEC_DEFAULT, KEY_FLOOR_TYPE, 'Offset', sFile)
-   if sFloorInfill == 'ZigZag' then
-      EgtSetInfo( nPartId, KEY_FLOOR_TYPE, INFILL_TYPE.ZIGZAG)
-   else
-      EgtSetInfo( nPartId, KEY_FLOOR_TYPE, INFILL_TYPE.OFFSET)
-   end
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_CEIL_NBR, '0')
-   local sCeilInfill = EgtGetStringFromIni( SEC_DEFAULT, KEY_CEIL_TYPE, 'Offset', sFile)
-   if sCeilInfill == 'ZigZag' then
-      EgtSetInfo( nPartId, KEY_CEIL_TYPE, INFILL_TYPE.ZIGZAG)
-   else
-      EgtSetInfo( nPartId, KEY_CEIL_TYPE, INFILL_TYPE.OFFSET)
-   end
-   
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_SPEED, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_FEED, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_EXT_FEED, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_INT_FEED, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_INFILL_FEED, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_LEAD_IN_FEED, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_LEAD_OUT_FEED, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_SUPPORT_FEED, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_G0_FEED, '0.0')  
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_MATERIAL, '')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_TOOL_DIAM, '0.0')
-   
-   local sLeadInType = EgtGetStringFromIni( SEC_DEFAULT, KEY_LEAD_IN_TYPE, 'None', sFile)
-   if sLeadInType == 'Linear' then
-      EgtSetInfo( nPartId, KEY_LEAD_IN_TYPE, LEAD_TYPE.LINEAR)
-   elseif sLeadInType == 'Arc' then
-      EgtSetInfo( nPartId, KEY_LEAD_IN_TYPE, LEAD_TYPE.ARC)
-   else  -- 'None'
-      EgtSetInfo( nPartId, KEY_LEAD_IN_TYPE, LEAD_TYPE.NONE)
-   end
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_LEAD_IN_TANG_DIST, '0.0')  
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_LEAD_IN_ORTHO_DIST, '0.0')
-   local sLeadOutType = EgtGetStringFromIni( SEC_DEFAULT, KEY_LEAD_OUT_TYPE, 'None', sFile)
-   if sLeadOutType == 'Linear' then
-      EgtSetInfo( nPartId, KEY_LEAD_OUT_TYPE, LEAD_TYPE.LINEAR)
-   elseif sLeadOutType == 'Arc' then
-      EgtSetInfo( nPartId, KEY_LEAD_OUT_TYPE, LEAD_TYPE.ARC)
-   else  -- 'None'
-      EgtSetInfo( nPartId, KEY_LEAD_OUT_TYPE, LEAD_TYPE.NONE)
-   end
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_LEAD_OUT_TANG_DIST, '0.0')  
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_LEAD_OUT_ORTHO_DIST, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_OFFSET_LEAD_POINT, '0.0') 
-
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_COASTING_LEN, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_COASTING_FEED, '20000.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_WIPE_LEN, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_WIPE_FEEDPU, '0.9')
-  
-   -- parametri per costolature
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_RIBS_OVERLAP, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_RIBS_SHELLS_NBR, '0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_RIBS_INVERT_DIR, '0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_RIBS_INVERT_ORDER, '0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_RIBS_LINK, '0')   
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_RIBS_LEAD_IN_INVERT, '0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_RIBS_LEAD_IN_LEN, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_RIBS_LEAD_OUT_INVERT, '0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_RIBS_LEAD_OUT_LEN, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_RIBS_LEAD_OUT_COASTING, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_RIBS_LEAD_OUT_WIPE, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_RIBS_LEAD_OUT_WIPE_DIR, '0.0')   
-   
-   -- parametri per regioni con diverso numero di passate
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_SHELL_NBR_DIFF, '0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_SHELL_NBR_COASTING, EgtGetInfo( nPartId, KEY_COASTING_LEN, 'd'))
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_SHELL_NBR_WIPE, EgtGetInfo( nPartId, KEY_WIPE_LEN, 'd'))
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_SHELL_NBR_WIPE_DIR, '0.0')   
-   
-   -- parametri per solidi ausiliari
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_AUX_SOLIDS_OVERLAP, '0')
-   
-   local sAuxSolidsInfill = EgtGetStringFromIni( SEC_DEFAULT, KEY_AUX_SOLIDS_INFILL, 'None', sFile)
-   if sAuxSolidsInfill == 'ZigZag' then
-      EgtSetInfo( nPartId, KEY_AUX_SOLIDS_INFILL, INFILL_TYPE.ZIGZAG)
-   elseif sAuxSolidsInfill == 'Offset' then
-      EgtSetInfo( nPartId, KEY_AUX_SOLIDS_INFILL, INFILL_TYPE.OFFSET)
-   else
-      EgtSetInfo( nPartId, KEY_AUX_SOLIDS_INFILL, INFILL_TYPE.NONE)
-   end
-   
-   local sAuxSolidsStrandOrder = EgtGetStringFromIni( SEC_DEFAULT, KEY_AUX_SOLIDS_PRINT_ORDER, 'InToOut', sFile)
-   if sAuxSolidsStrandOrder == 'OutToIn' then
-      EgtSetInfo( nPartId, KEY_AUX_SOLIDS_PRINT_ORDER, PRINT_ORDER.EXT_INT_INF)
-   else            -- 'InToOut'
-      EgtSetInfo( nPartId, KEY_AUX_SOLIDS_PRINT_ORDER, PRINT_ORDER.INF_INT_EXT)
-   end
-   
-   local sAuxSolidsLinkType = EgtGetStringFromIni( SEC_DEFAULT, KEY_AUX_SOLIDS_LINK_TYPE, 'None', sFile)
-   if sAuxSolidsLinkType == 'None' then
-      EgtSetInfo( nPartId, KEY_AUX_SOLIDS_LINK_TYPE, LINK_TYPE.NONE)
-   elseif sAuxSolidsLinkType == 'BiArc' then
-      EgtSetInfo( nPartId, KEY_AUX_SOLIDS_LINK_TYPE, LINK_TYPE.BIARC)
-   else         -- 'Linear' 
-      EgtSetInfo( nPartId, KEY_AUX_SOLIDS_LINK_TYPE, LINK_TYPE.LINEAR)
-   end
-   
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_AUX_SOLIDS_LINK_PARAM, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_AUX_SOLIDS_SP_OFFSET, '0.0')
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_AUX_SOLIDS_COASTING_LEN, EgtGetInfo( nPartId, KEY_COASTING_LEN, 'd'))
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_AUX_SOLIDS_WIPE_LEN, EgtGetInfo( nPartId, KEY_WIPE_LEN, 'd'))
-   SetParamInfo( sFile, nPartId, SEC_DEFAULT, KEY_AUX_SOLIDS_WIPE_DIR, '0.0')
-end
-
---------------------------------------------------------------------
-local function RestoreSolidPosition( nPartId)
+local function RestoreOriginalPosition( nPartId)
   if not nPartId then return end
-   -- recupero vecchio movimento
-   local vtMove = EgtGetInfo( nPartId, KEY_MOVED_PART, 'v')
-   if vtMove then
-      vtMove = -vtMove
+   
+   -- correzione solo del solido ( progetti vecchi)
+   local vtMove1 = EgtGetInfo( nPartId, KEY_MOVED_PART, 'v')
+   if vtMove1 then
+      vtMove1 = - vtMove1
      EgtRemoveInfo( nPartId, KEY_MOVED_PART)
      local SolidLayId = EgtGetFirstNameInGroup( nPartId, PRINT_SOLID)
      if SolidLayId then
         local EntId = EgtGetFirstInGroup( SolidLayId)
         while EntId do
-            EgtMove( EntId, vtMove)
+            EgtMove( EntId, vtMove1, GDB_RT.GLOB)
            EntId = EgtGetNext( EntId) 
         end
      end
   end
+   
+   -- correzione dell'intero pezzo
+   local vtMove = EgtGetInfo( nPartId, KEY_MOVED_PART2, 'v')
+   if vtMove then
+      EgtRemoveInfo( nPartId, KEY_MOVED_PART2)
+      EgtMove( nPartId, - vtMove, GDB_RT.GLOB)
+      -- sistemo il riferimento
+      local nFrameId = EgtGetFirstNameInGroup( nPartId, LAY_FRAME)
+      EgtMove( nFrameId, vtMove, GDB_RT.GLOB)
+   end
 end

 ---------------------------------------------------------------------
@@ -210,6 +66,19 @@ local function RemoveOldSlices( nPartId)
         EgtErase( vOldSliceId[i])
      end
   end
+   
+   -- rimuovo gruppo con i loop dei setti
+   local nRibsLoopsGrp = EgtGetFirstNameInGroup( nPartId, RIBS_LOOP_GRP)
+   if nRibsLoopsGrp then
+      EgtErase( nRibsLoopsGrp)
+   end
+   
+   -- rimuovo eventuali gruppi di infill (anche per aux solids)
+   local nInfillId = EgtGetFirstNameInGroup( nPartId, INFILL_GRP .. '*')
+   while nInfillId do
+      EgtErase( nInfillId)
+      nInfillId = EgtGetFirstNameInGroup( nPartId, INFILL_GRP .. '*')
+   end
 end

 ---------------------------------------------------------------------
@@ -274,78 +143,56 @@ function RunSlicing.Exec()
   end
   local nSolidLayId = EgtGetFirstNameInGroup( nPartId, PRINT_SOLID)
   local nStmId = EgtGetFirstInGroup( nSolidLayId or GDB_ID.NULL)
-   if not nStmId or EgtGetType( nStmId) ~= GDB_TY.SRF_MESH then
-      EgtOutBox( "Part without surface!", 'Warning', 'WARNING')
-      return
+   if nStmId and EgtGetType( nStmId) ~= GDB_TY.SRF_MESH then
+       EgtOutBox( "Part without surface!", 'Warning', 'WARNING')
+       return
   end
   local nRibsLayId = EgtGetFirstNameInGroup( nPartId, LAY_RIBS)
   local nShellNbrLay = EgtGetFirstNameInGroup( nPartId, LAY_SHELL_NBR)
   local nAuxSolidsLay = EgtGetFirstNameInGroup( nPartId, LAY_AUX_SOLIDS)
   local nStartLayId = EgtGetFirstNameInGroup( nPartId, LAY_MACH_START)
-
-   local sParamFile
-   if not PRINT or PRINT.PROGRAM ~= 1 then
-      --Scelta del file dei parametri
-      local sPrevParamFile = EgtGetInfo( nPartId, KEY_PARAMS)
-      if not sPrevParamFile or not EgtExistsFile( sPrevParamFile) then
-         local sLastParamFile = EgtGetStringFromIni( '3dPrinting', 'ParamFile', '', EgtGetIniFile())
-         local sDir = EgtSplitPath( sLastParamFile)
-         sPrevParamFile = sDir..'*.ini'
-      end
-      sParamFile = EgtFileDialog( true, sPrevParamFile, 'Param Files (*.ini)|*.ini||') 
-      if not sParamFile then
-         EgtOutBox( 'No param file selected', 'Warning', 'WARNING')
-         return 
-      end
-      EgtWriteStringToIni( '3dPrinting', 'ParamFile', sParamFile, EgtGetIniFile())
-   end
-   
-   -- Elimino eventuale precedente file dei risultati
-   if not PRINT or PRINT.PROGRAM ~= 1 then
-      local sResultFile = EgtChangePathExtension( sCurrProjectPath, '.csv')
-      EgtEraseFile( sResultFile)
-   end
-
+  
   -- Elimino eventuale precedente lavorazione
   EgtSetCurrMachGroup()
   EgtRemoveAllOperations()
   EgtResetCurrMachGroup()

-   -- Lettura dei parametri 
-   if not PRINT or PRINT.PROGRAM ~= 1 then
-      LoadParams( sParamFile, nPartId)
-   end
-   -- Lettura dati macchina
-   local sMachIni = EgtGetCurrMachineDir() .. '\\' .. EgtGetCurrMachineName() .. '.ini'
-   local HMax = tonumber( EgtGetStringFromIni( '3dPrinting', 'HMax', 500, sMachIni))
-
-   -- Eventuale ripristino posizione solido
-   RestoreSolidPosition( nPartId)
+   -- Eventuale ripristino posizione originaria
+   RestoreOriginalPosition( nPartId)
   
   -- Rimozione vecchi conti
   RemoveOldSlices( nPartId)

   -- Rimozione vecchi TFS
   RemoveOldTFS()
-
+  
   -- Calcolo delle fette
-   CSLICES.Exec( nPartId, nStmId, HMax)
+   local bOk = CSLICES.Exec( nPartId, nStmId)
   EgtDraw()

   -- Calcolo dei percorsi sul centro strand in basso
-   CPATHS.Exec( nPartId, nStmId)
+   bOk = bOk and CPATHS.Exec( nPartId)
   EgtDraw()

   -- Calcolo dei percorsi di lavoro
-   CTP.Exec( nPartId)
+   bOk = bOk and CTP.Exec( nPartId)
   EgtDraw()

   -- Calcolo dei solidi degli strand a partire dai percorsi di lavoro
   local bCalcSolids = EgtGetInfo( nPartId, KEY_CALC_SOLIDS, 'b')
   EgtRemoveInfo( nPartId, KEY_HAS_SOLIDS)
-   if bCalcSolids then
+   if bCalcSolids and bOk then
      CSOLIDS.Exec( nPartId)
   end
+ 
+   if not bOk then
+      -- eventuale ripristino posizione originaria
+      RestoreOriginalPosition( nPartId)
+      -- rimozione vecchi conti
+      RemoveOldSlices( nPartId)
+      EgtDraw()
+      return false
+   end
   
   EgtSetStatus( nSolidLayId, GDB_ST.OFF)
   EgtSetStatus( nRibsLayId or GDB_ID.NULL, GDB_ST.OFF)
@@ -356,7 +203,8 @@ function RunSlicing.Exec()
   
   -- Aggiorno impostazioni di visibilita' per ShowManager
   SetViewInfo( bCalcSolids)
-
+   
+   return true
 end

 ---------------------------------------------------------------------
@@ -1,195 +0,0 @@
-- RunViewManager.lua by Egaltech s.r.l. 2022/07/03
-- Gestione visualizzazione per Stampa 3d
-
-- Tabella per definizione modulo
-local RunViewManager = {}
-
-- Intestazioni
-require( 'EgtBase')
-
-EgtOutLog( ' RunViewManager started', 1)
-
-- Costanti generali
-local AMD = require( 'AddManData')
-
---------------------------------------------------------------------
-local function CalcShow( nShellView, nType)
-   if nShellView == SHELL_VIEW_TYPE.OUTER then
-      return ( nType == TYPE.OUTER_SHELL or nType == TYPE.EXTRA_OUTER_SHELL)
-   elseif nShellView == SHELL_VIEW_TYPE.INNER then
-      return ( nType == TYPE.INNER_SHELL)
-   elseif nShellView == SHELL_VIEW_TYPE.INFILL then
-      return ( nType == TYPE.INFILL)
-   else --nShellView == SHELL_VIEW_TYPE.ALL
-      return true
-   end
-end
-
---------------------------------------------------------------------
-local function CalcType( nEntId, nOldType)
-   local nType = EgtGetInfo( nEntId, KEY_TYPE, 'i')
-   if not nType or nType == TYPE.LINK or nType == TYPE.COASTING  or nType == TYPE.WIPE then
-      nType = nOldType
-   end
-   if nType == TYPE.RIB or nType == TYPE.AUX_SOLID then
-      nType = TYPE.INFILL
-   end
-   if nType == TYPE.EXTRA_SHELL then
-      nType = TYPE.INNER_SHELL
-   end
-   return nType
-end
-
---------------------------------------------------------------------
-function RunViewManager.Exec()
-   local nVisibilityMode = LAYER_VIEW_TYPE.ALL     -- 1 = All, 2 = Till Selected, 3 = Only Selected, 4 = From Selected
-   local nShellType = SHELL_VIEW_TYPE.ALL          -- 1 = All, 2 = Outer, 3 = Inner, 4 = infill
-   local nOldSelLayerId = GDB_ID.NULL
-   
-   -- leggo ultimi valori
-   local nViewId = EgtGetFirstNameInGroup( GDB_ID.ROOT, VIEWPARAMS)
-   if nViewId then
-      nVisibilityMode = EgtGetInfo( nViewId, KEY_LAYER_VIEW, 'i')
-      nShellType = EgtGetInfo( nViewId, KEY_SHELL_VIEW, 'i')
-      nOldSelLayerId = EgtGetInfo( nViewId, KEY_SEL_LAYER, 'i') or GDB_ID.NULL
-   end
-   local sLayerViewCombo = ''
-   if nVisibilityMode == LAYER_VIEW_TYPE.TILL_SEL then
-      sLayerViewCombo = 'CB:All,*Till Selected,Only Selected,From Selected'
-   elseif nVisibilityMode == LAYER_VIEW_TYPE.ONLY_SEL then
-      sLayerViewCombo = 'CB:All,Till Selected,*Only Selected,From Selected'
-   elseif nVisibilityMode == LAYER_VIEW_TYPE.FROM_SEL then
-      sLayerViewCombo = 'CB:All,Till Selected,Only Selected,*From Selected'
-   else
-      sLayerViewCombo = 'CB:*All,Till Selected,Only Selected,From Selected'
-   end
-   local sShellViewCombo = ''
-   if nShellType == SHELL_VIEW_TYPE.OUTER then
-      sShellViewCombo = 'CB:All,*Outer,Inner,Infill'
-   elseif nShellType == SHELL_VIEW_TYPE.INNER then
-      sShellViewCombo = 'CB:All,Outer,*Inner,Infill'
-   elseif nShellType == SHELL_VIEW_TYPE.INFILL then
-      sShellViewCombo = 'CB:All,Outer,Inner,*Infill'
-   else
-      sShellViewCombo = 'CB:*All,Outer,Inner,Infill'
-   end
-   
-   ViewValues = EgtDialogBox( 'Slicing visibility manager', { 'Visibility Mode', sLayerViewCombo},
-                                                            { 'Shell type', sShellViewCombo})
-   if not ViewValues or #ViewValues < 2 then return end
-
-   if ViewValues[1] == 'All' then
-      nVisibilityMode = LAYER_VIEW_TYPE.ALL
-   elseif ViewValues[1] == 'Till Selected' then
-      nVisibilityMode = LAYER_VIEW_TYPE.TILL_SEL
-   elseif ViewValues[1] == 'Only Selected' then
-      nVisibilityMode = LAYER_VIEW_TYPE.ONLY_SEL
-   elseif ViewValues[1] == 'From Selected' then
-      nVisibilityMode = LAYER_VIEW_TYPE.FROM_SEL
-   end
-   if ViewValues[2] == 'All' then
-      nShellType = SHELL_VIEW_TYPE.ALL
-   elseif ViewValues[2] == 'Outer' then
-      nShellType = SHELL_VIEW_TYPE.OUTER
-   elseif ViewValues[2] == 'Inner' then
-      nShellType = SHELL_VIEW_TYPE.INNER
-   elseif ViewValues[2] == 'Infill' then
-      nShellType = SHELL_VIEW_TYPE.INFILL
-   end
-
-   -- Recupero ultimo layer selezionato
-   -- verifico sia un pezzo valido
-   local sSelLayerName = ''
-   local bFound = false
-   local nSelLayerId = EgtGetLastSelectedObj() 
-   while nSelLayerId do
-      local sSelLayerName = EgtGetName( nSelLayerId)
-      if sSelLayerName and ( sSelLayerName:sub(1, 5) == SLICE_LAYER or sSelLayerName:sub(3, 7) == SLICE_LAYER) then
-         bFound = true
-         break
-      end
-      nSelLayerId = EgtGetParent( nSelLayerId)
-   end
-   if not bFound then
-      if nOldSelLayerId and nOldSelLayerId ~= GDB_ID.NULL then
-         nSelLayerId = nOldSelLayerId
-      else
-         if nVisibilityMode ~= LAYER_VIEW_TYPE.ALL then
-            EgtOutBox( 'No selected element!', 'Warning', 'WARNING')
-            return
-         else
-            nSelLayerId = GDB_ID.NULL
-            sSelLayerName = ''
-         end
-      end
-   end
-
-   -- ciclo sui pezzi
-   local nPartIndex = 1
-   local nPartId = EgtGetFirstNameInGroup( GDB_ID.ROOT, PART .. nPartIndex) 
-   while nPartId do
-      -- ciclo sui layer per dis/attivare il resto
-      local nLayerIndex = 1
-      local nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex) or EgtGetFirstNameInGroup( nPartId, "__" .. SLICE_LAYER .. nLayerIndex)
-      while nLayerId do
-         if nVisibilityMode == LAYER_VIEW_TYPE.ALL then
-            EgtSetStatus( nLayerId, GDB_ST.ON)
-         elseif nVisibilityMode == LAYER_VIEW_TYPE.TILL_SEL then
-            EgtSetStatus( nLayerId, EgtIf( nLayerId <= nSelLayerId, GDB_ST.ON, GDB_ST.OFF))
-         elseif nVisibilityMode == LAYER_VIEW_TYPE.ONLY_SEL then
-            EgtSetStatus( nLayerId, EgtIf( nLayerId == nSelLayerId, GDB_ST.ON, GDB_ST.OFF))
-         elseif nVisibilityMode == LAYER_VIEW_TYPE.FROM_SEL then
-            EgtSetStatus( nLayerId, EgtIf( nLayerId >= nSelLayerId, GDB_ST.ON, GDB_ST.OFF))
-         end
-         local nCrvId = EgtGetFirstGroupInGroup( nLayerId)
-         while nCrvId do
-            ----
-            local nOldType = TYPE.OUTER_SHELL
-            local nPathId = EgtGetFirstNameInGroup( nCrvId, PATH_GRP)
-            local nShellId = EgtGetFirstInGroup( nPathId)
-            while nShellId do
-               local nType = CalcType( nShellId, nOldType)
-               nOldType = nType
-               EgtSetStatus( nShellId, EgtIf( CalcShow( nShellType, nType), GDB_ST.ON, GDB_ST.OFF))
-               nShellId = EgtGetNext( nShellId)
-            end
-            ----
-            nOldType = TYPE.OUTER_SHELL
-            local nSolidId = EgtGetFirstNameInGroup( nCrvId, SOLID_GRP)
-            local nSurfId = EgtGetFirstInGroup( nSolidId)
-            while nSurfId do
-               local nType = CalcType( nSurfId, nOldType)
-               nOldType = nType
-               EgtSetStatus( nSurfId, EgtIf( CalcShow( nShellType, nType), GDB_ST.ON, GDB_ST.OFF))
-               nSurfId = EgtGetNext( nSurfId)
-            end
-            ----
-            nOldType = TYPE.OUTER_SHELL
-            local nToolPathId = EgtGetFirstNameInGroup( nCrvId, TOOLPATH_GRP)
-            nShellId = EgtGetFirstInGroup( nToolPathId)
-            while nShellId do
-               local nType = CalcType( nShellId, nOldType)
-               nOldType = nType
-               EgtSetStatus( nShellId, EgtIf( CalcShow( nShellType, nType), GDB_ST.ON, GDB_ST.OFF))
-               nShellId = EgtGetNext( nShellId)
-            end
-            nCrvId = EgtGetNext( nCrvId)
-         end
-         nLayerIndex = nLayerIndex + 1
-         nLayerId = EgtGetFirstNameInGroup( nPartId, SLICE_LAYER .. nLayerIndex) or EgtGetFirstNameInGroup( nPartId, "__" .. SLICE_LAYER .. nLayerIndex)
-      end
-      nPartIndex = nPartIndex + 1
-      nPartId = EgtGetFirstNameInGroup( GDB_ID.ROOT, PART .. nPartIndex)
-   end
-
-   -- riporto impostazioni in gruppo apposito
-   EgtSetInfo( nViewId, KEY_LAYER_VIEW, nVisibilityMode)
-   EgtSetInfo( nViewId, KEY_SHELL_VIEW, nShellType)
-   EgtSetInfo( nViewId, KEY_SEL_LAYER, nSelLayerId)
-
-   EgtDraw()
-
-end
-
---------------------------------------------------------------------
-return RunViewManager
@@ -1,18 +0,0 @@
-- MachiningParamCalc.lua by Egaltech s.r.l. 2022/04/05
-- Gestione visualizzazione per Stampa 3d
-
-- Intestazioni
-require( 'EgtBase')
-_ENV = EgtProtectGlobal()
-EgtEnableDebug( false)
-
-- Imposto direttorio libreria specializzata per Stampa 3d
-local sBaseDir = EgtGetSourceDir()
-EgtAddToPackagePath( sBaseDir .. 'LuaLibs\\?.lua')
-
-- Librerie
-_G.package.loaded.RunMachiningParamCalc = nil
-local RMPC = require( 'RunMachiningParamCalc')
-
-- Calcolo
-RMPC.Exec()
@@ -1,18 +0,0 @@
-- MachiningParamCalc.lua by Egaltech s.r.l. 2022/04/05
-- Gestione visualizzazione per Stampa 3d
-
-- Intestazioni
-require( 'EgtBase')
-_ENV = EgtProtectGlobal()
-EgtEnableDebug( false)
-
-- Imposto direttorio libreria specializzata per Stampa 3d
-local sBaseDir = EgtGetSourceDir()
-EgtAddToPackagePath( sBaseDir .. 'LuaLibs\\?.lua')
-
-- Librerie
-_G.package.loaded.RunMachiningParamEdit = nil
-local RMPE = require( 'RunMachiningParamEdit')
-
-- Calcolo
-RMPE.Exec()
@@ -1,18 +0,0 @@
-- MachiningParamCalc.lua by Egaltech s.r.l. 2022/04/09
-- Gestione edit parametri materiali per Stampa 3d
-
-- Intestazioni
-require( 'EgtBase')
-_ENV = EgtProtectGlobal()
-EgtEnableDebug( false)
-
-- Imposto direttorio libreria specializzata per Stampa 3d
-local sBaseDir = EgtGetSourceDir()
-EgtAddToPackagePath( sBaseDir .. 'LuaLibs\\?.lua')
-
-- Librerie
-_G.package.loaded.RunMaterialParamEdit = nil
-local RMPE = require( 'RunMaterialParamEdit')
-
-- Calcolo
-RMPE.Exec()
@@ -1,20 +0,0 @@
-- PlacePart.lua by Egaltech s.r.l. 2022/04/11
-- Gestione calcolo disposizione e lavorazioni per stampa 3d
-- 2022/03/21 Creazione file
-
-
-- Intestazioni
-require( 'EgtBase')
-_ENV = EgtProtectGlobal()
-EgtEnableDebug( false)
-
-- Imposto direttorio libreria specializzata per Stampa 3d
-local sBaseDir = EgtGetSourceDir()
-EgtAddToPackagePath( sBaseDir .. 'LuaLibs\\?.lua')
-
-- Librerie
-_G.package.loaded.RunPartPositioning = nil
-local RPP = require( 'RunPartPositioning')
-
-- Calcolo
-RPP.Exec()
@@ -1,18 +0,0 @@
-- ShowManager.lua by Egaltech s.r.l. 2022/04/05
-- Gestione visualizzazione per Stampa 3d
-
-- Intestazioni
-require( 'EgtBase')
-_ENV = EgtProtectGlobal()
-EgtEnableDebug( false)
-
-- Imposto direttorio libreria specializzata per Stampa 3d
-local sBaseDir = EgtGetSourceDir()
-EgtAddToPackagePath( sBaseDir .. 'LuaLibs\\?.lua')
-
-- Librerie
-_G.package.loaded.RunShowManager = nil
-local RSM = require( 'RunShowManager')
-
-- Calcolo
-RSM.Exec()
@@ -1,18 +0,0 @@
-- SliceAdvancement.lua by Egaltech s.r.l. 2022/04/05
-- Gestione visualizzazione per Stampa 3d
-
-- Intestazioni
-require( 'EgtBase')
-_ENV = EgtProtectGlobal()
-EgtEnableDebug( false)
-
-- Imposto direttorio libreria specializzata per Stampa 3d
-local sBaseDir = EgtGetSourceDir()
-EgtAddToPackagePath( sBaseDir .. 'LuaLibs\\?.lua')
-
-- Librerie
-_G.package.loaded.RunSliceAdvancement = nil
-local RSA = require( 'RunSliceAdvancement')
-
-- Calcolo
-RSA.Exec()
@@ -1,18 +0,0 @@
-- SlicePalette.lua by Egaltech s.r.l. 2022/04/05
-- Gestione visualizzazione per Stampa 3d
-
-- Intestazioni
-require( 'EgtBase')
-_ENV = EgtProtectGlobal()
-EgtEnableDebug( false)
-
-- Imposto direttorio libreria specializzata per Stampa 3d
-local sBaseDir = EgtGetSourceDir()
-EgtAddToPackagePath( sBaseDir .. 'LuaLibs\\?.lua')
-
-- Librerie
-_G.package.loaded.RunSlicePalette = nil
-local RSP = require( 'RunSlicePalette')
-
-- Calcolo
-RSP.Exec()
@@ -1,4 +1,4 @@
-- Slicing.lua by Egaltech s.r.l. 2022/03/30
+-- Slicing.lua by Egaltech s.r.l. 2023/01/11
 -- Calcoli prima fase per Stampa 3d

 -- Intestazioni
@@ -7,8 +7,7 @@ _ENV = EgtProtectGlobal()
 EgtEnableDebug( false)

 -- Imposto direttorio libreria specializzata per Stampa 3d
-local sBaseDir = EgtGetSourceDir()
-EgtAddToPackagePath( sBaseDir .. 'LuaLibs\\?.lua')
+EgtAddToPackagePath( PRINT.BASEDIR .. '\\LuaLibs\\?.lua')

 -- Librerie
 _G.package.loaded.RunSlicing = nil
@@ -0,0 +1,4 @@
+-- Version.lua by Egaltech s.r.l. 2023/08/28
+-- Gestione della versione di 3dPrinting
+
+VERSION = '2.5h1'
@@ -1,18 +0,0 @@
-- ViewManager.lua by Egaltech s.r.l. 2022/04/05
-- Gestione visualizzazione per Stampa 3d
-
-- Intestazioni
-require( 'EgtBase')
-_ENV = EgtProtectGlobal()
-EgtEnableDebug( false)
-
-- Imposto direttorio libreria specializzata per Stampa 3d
-local sBaseDir = EgtGetSourceDir()
-EgtAddToPackagePath( sBaseDir .. 'LuaLibs\\?.lua')
-
-- Librerie
-_G.package.loaded.RunViewManager = nil
-local RVM = require( 'RunViewManager')
-
-- Calcolo
-RVM.Exec()
Author	SHA1	Message	Date
SaraP	a595fcdb98	3dPrinting : - corretto collegamento fra ribs esterni che passa sotto il solido.	2023-08-30 09:52:28 +02:00
Dario Sassi	43949d7f13	3dPrinting 2.5h1 : - aggiunta direzione su estrusioni a 45deg in X e Y (X+/- e Y+/-).	2023-08-28 19:52:40 +02:00
SaraP	00700f3194	3dPrinting : - lettura di HMax per slicing dai parametri - correzione slicing filled solids.	2023-08-25 09:25:14 +02:00
SaraP	28686fe6b6	3dPrinting : - introdotta info con numero totale di layers.	2023-08-09 17:34:16 +02:00
SaraP	4a4a7d648b	3dPrinting : - aggiunta chiusura dei percorsi di extra shell - aggiunto clamp sui valori di strand width.	2023-07-20 12:44:32 +02:00
SaraP	03c1768afe	3dPrinting 2.5g1 : - aggiunto numero di passate per Filled Solids.	2023-07-03 10:23:37 +02:00
SaraP	ba9470ee88	3dPrinting : - aggiunto collegamento infill.	2023-06-30 12:52:39 +02:00
SaraP	e629f1b12d	3dPrinting 2.5f2 : - gestione strand variabili per entità.	2023-06-21 09:21:17 +02:00
SaraP	451f3a2939	3dPrinting 2.5f1 : - correzioni infill - aggiornamento versione.	2023-06-15 10:17:29 +02:00
SaraP	bc3cf3b3a9	3dPrinting : - corretto errore reduced shell number di area nulla.	2023-06-08 10:34:42 +02:00
SaraP	4225985a61	3dPrinting : - aggiunta approssimazione delle curve dopo slicing ( per evitare caso di fallimento offset) - migliorata segnalazione errori.	2023-06-06 17:11:09 +02:00
SaraP	fcd61efd53	3dPrinting : - piccole correzioni nei setti per evitare interruzione calcolo.	2023-06-01 17:31:43 +02:00
SaraP	01711d2925	3dPrinting 2.5e3 : - infill prima versione ( lineari, griglia, zigzag, nido d'ape) - aggiunto riempimento ad infill anche nei solidi ausiliari - migliorie varie nella gestione dei riempimenti pieni - migliorie nei link e in StartPointOffsetOnLayer.	2023-05-26 15:20:27 +02:00
SaraP	e015136592	3dPrinting 2.5e2 ; - corretto errore nel lead in/lead out dei setti quando terminano su altro setto - migliorie varie per lead in, lead out e link dei setti.	2023-05-24 08:26:27 +02:00
SaraP	72d1b61c6a	3dPrinting 2.5d5 : - corretto errore nel trim dei setti.	2023-04-28 14:38:45 +02:00
SaraP	02fe05d5e1	3dPrinting 2.5d4 : - corretto errore nel calcolo del lead out per setti.	2023-04-20 12:03:45 +02:00
SaraP	3c839716f8	3dPrinting : - corretto errore nel collegamento setti.	2023-04-18 11:29:46 +02:00
SaraP	2fc63b0d25	3dPrinting : - piccola correzione slicing.	2023-04-17 17:47:02 +02:00
SaraP	9c42a70c6a	3dPrinting 2.5d3 : - migliorata gestione di setti con fori - gestione di setti con link disegnato dall'utente dallo stesso lato del solido.	2023-04-17 17:17:59 +02:00
DarioS	922c5510c0	3dPrinting : - in Generazione CN al salvataggio progetto si impone la nuova estensione "icrs".	2023-04-11 13:16:17 +02:00
DarioS	56ff8468f0	3dPrinting : - aggiunto Version.lua alla compilazione.	2023-04-11 11:43:25 +02:00
SaraP	63efafde60	3dPrinting 2.5d1 : - migliorata segnalazione errori.	2023-04-04 08:59:33 +02:00
SaraP	49c8361bc5	3dPrinting : - nei FilledSolid il riempimento di tipo none viene realizzato con unica passata lungo il perimetro.	2023-03-22 11:52:45 +01:00
SaraP	a7c7bd63ed	3dPrinting : - migliorie nei riempimenti a zigzag per SolidFill - gestione SolidFill con buchi.	2023-03-21 12:14:39 +01:00
Samuele Locatelli	4da4b8cf4d	Merge branch 'develop'	2023-03-20 15:16:59 +01:00
Samuele Locatelli	90a8b558b9	fix script netuse	2023-03-20 12:45:43 +01:00
Samuele Locatelli	eca66a82bf	typo	2023-03-20 12:44:41 +01:00
Samuele Locatelli	82f61af2a3	sintassi alternativa x net share	2023-03-20 12:43:48 +01:00
Samuele Locatelli	2914862a15	aggiunto escape nel path	2023-03-20 12:41:23 +01:00
Samuele Locatelli	7d026726d6	test develop compile	2023-03-20 12:30:31 +01:00
Samuele Locatelli	439d48b380	update yaml gestione interfacce di rete	2023-03-20 12:29:56 +01:00
Samuele Locatelli	e45cbf1f3d	Merge branch 'main' into develop	2023-03-20 12:16:10 +01:00
SaraP	046431a2a9	3dPrinting : - corretta la gestione delle uscite per setti chiusi con link disegnato dall'utente.	2023-03-20 11:49:15 +01:00
SaraP	3745705b3d	3dPrinting : - corretto errore nel trim dei ribs.	2023-03-16 14:54:56 +01:00
SaraP	1da71888e7	3dPrinting : - corretto il calcolo della correzione in z per appoggiare sulla tavola/bancaletto.	2023-03-13 10:56:56 +01:00
SaraP	862216b84f	3dPrinting 2.5c2 : - aggiunto taglio dei ribs unbounded con solido se richiesto.	2023-03-06 14:54:19 +01:00
Emmanuele Sassi	25fb2b6b37	- gestito conto separato lunghezza percorso per calcolo massa totale oggetto	2023-03-03 13:13:08 +01:00
SaraP	921b8e2ef2	3dPrinting 2.5c1 : - aggiunto flag per decidere se limitare ribs unbounded con solido.	2023-03-01 15:04:03 +01:00
SaraP	9e1588b386	3dPrinting 2.5b3 : - aggiunto Version.lua.	2023-02-28 08:31:08 +01:00
SaraP	3a1dcbb822	3dPrinting : - gestita interruzione degli script.	2023-02-16 10:27:46 +01:00
SaraP	31f27d66c1	3dPrinting : - aggiunte le diverse tipologie di ribs nell'ordinamento degli elementi di stampa.	2023-02-15 14:39:47 +01:00
SaraP	df0cb0dfa3	3dPrinting : - aggiunte le costanti per le tipologie di setti in PRINT_ELEMENT.	2023-02-14 09:42:43 +01:00
SaraP	4916da48f9	3dPrinting : - modificato calcolo della correzione in z per appoggiare correttamente sulla tavola - correzione quote di slicing per includere setti esterni e unbounded.	2023-02-10 10:36:20 +01:00
DarioS	26acf572fc	Merge branch 'main' of https://gitlab.steamware.net/egalware/3dPrinting	2023-02-02 11:55:06 +01:00
DarioS	412d1b15b5	3dPrinting : - in generazione CN aggiunta restituzione stringa di errore (PRINT.MSG).	2023-02-02 11:54:43 +01:00
SaraP	4e85ebda3d	3dPrinting : - piccole migliorie nei setti.	2023-02-02 11:16:10 +01:00
DarioS	b020c855e3	3dPrinting : - correzione errore nei setti.	2023-02-02 09:21:22 +01:00
SaraP	6117583a79	3dPrinting : - aggiunto offset lead point anche per shell interne quando non ci sono collegamenti.	2023-02-01 11:03:24 +01:00
SaraP	9f5c2523e0	3dPrinting : - modifiche per nuova definizione di EgtCurveCurveInters.	2023-02-01 09:36:43 +01:00
SaraP	ee59b4ac74	3dPrinting : - modifiche nei setti per conservare i link disegnati dall'utente ( prima versione) - aggiunti ingressi/uscite per setti che non iniziano/terminano su shell.	2023-01-31 15:35:08 +01:00
SaraP	303bc59ddd	3dPrinting : - aggiunto controllo sulla direzione della normale delle superfici ottenute dallo slicing.	2023-01-27 16:14:59 +01:00
DarioS	0a08957c55	Merge branch 'main' of https://gitlab.steamware.net/egalware/3dPrinting	2023-01-26 11:04:32 +01:00
DarioS	ba1c7b7657	3dPrinting : - corretta direzione estrusione dei Link nei setti.	2023-01-26 11:03:12 +01:00
SaraP	550365322a	3dPrinting : - aggiunto StartPointOffsetOnLayer per setti chiusi.	2023-01-12 17:43:06 +01:00
DarioS	98e69f098d	3dPrinting : - altra correzione a compilazione su git Push.	2023-01-12 09:33:13 +01:00
DarioS	7ff7e6e2e3	3dPrinting : - correzione a compilazione su git Push.	2023-01-12 09:31:11 +01:00
DarioS	3a8f94f027	3dPrinting : - eliminati tutti i file non per Icarus (lua e immagini) - eliminata cartella Images - compilazione 32 e 64 bit unificata con direttorio destinazione bin.	2023-01-12 09:25:56 +01:00
DarioS	30677a89a4	3dPrinting : - modifiche per compilazione lua5.4.	2023-01-11 19:50:51 +01:00
DarioS	ab39b407e4	Merge branch 'main' of https://gitlab.steamware.net/egalware/3dPrinting	2023-01-11 18:32:01 +01:00
DarioS	7f6ddd699c	3dPrinting : - nuova compilazione per lua 5.4.	2023-01-11 18:31:35 +01:00
SaraP	f050f49b66	3dPrinting : - ordinamento elementi di stampa - oridinamento per tipologia di setti.	2023-01-10 08:54:09 +01:00
SaraP	1225625a9a	3dPrinting : - aggiunta nuova tipologia per setti ( setti di supporto) - correzioni per setti chiusi nel caso di intersezioni con 2 passate.	2023-01-05 15:16:45 +01:00
SaraP	89a8002205	3dPrinting : - gestione di offset lead point con valori negativi.	2023-01-04 11:50:04 +01:00
SaraP	d576203a97	3dPrinting : - gestione setti chiusi - correzioni varie nelle regioni con diverse passate.	2023-01-03 16:36:47 +01:00
DarioS	b2cba54453	3dPrinting : - modifiche per assegnare valori di defualt a nuovi parametri.	2022-12-28 08:49:13 +01:00
Emmanuele Sassi	96a6f32458	- aggiornamento con nuove costanti materiale	2022-12-27 16:34:44 +01:00
Emmanuele Sassi	a6a98f7a11	Merge branch 'main' of https://gitlab.steamware.net/egalware/3dprinting	2022-12-27 14:48:12 +01:00
Emmanuele Sassi	f9d774a7eb	- migliorata gestione wait time	2022-12-27 14:48:09 +01:00
SaraP	d7b5d7d16d	3dPrinting : - corretto rilevamento dell'intersezione fra setti.	2022-12-27 12:21:30 +01:00
DarioS	5e3def88fa	3dPrinting : - piccola correzione a AddRetraction per evitare crash.	2022-12-20 11:05:16 +01:00
SaraP	ef49a211ab	3dPrinting : - migliorie nel calcolo solidi per spiral vase.	2022-12-16 16:55:40 +01:00
SaraP	a7617c2761	3dPrinting : - corretto errore nel calcolo dei solidi per spiral vase.	2022-12-12 12:34:50 +01:00
DarioS	1f8881a4c3	3dPrinting : - modifiche a determinazione parametri calcolo MF e SC per Ribs Unbounded.	2022-12-07 12:19:47 +01:00
SaraP	6d03a8e898	3dPrinting : - corretto errore nelle intersezioni di setti con overlap diversi.	2022-12-06 09:36:48 +01:00
SaraP	313e837f41	3dPrinting : - modificato ordine di default per realizzazione setti ( unbounded fatti per primi).	2022-12-06 08:43:34 +01:00
DarioS	076e2382ab	3dPrinting : - piccole modifiche per stampa 45deg su Y e gestione movimento solido conseguente.	2022-12-05 08:22:16 +01:00
SaraP	fb9ecc811d	3dPrinting : - migliorata organizzazione calcolo toolpath.	2022-12-02 11:36:09 +01:00
SaraP	298b0a4506	3dPrinting : - correzione calcolo toolpath in spiral vase quando sezione varia tra layer.	2022-12-01 11:31:18 +01:00
SaraP	693746d6e3	3dPrinting : - aggiunto slicing a 45° lungo Y.	2022-11-29 10:21:14 +01:00
SaraP	8622fc8919	3dPrinting : - migliorata intersezione setti - aggiunto ordine di realizzazione per tipologie setti.	2022-11-24 16:09:16 +01:00
DarioS	0a78833f61	3dPrinting : - corretto calcolo TFS quando si estrudono solo i Ribs e non il Pezzo.	2022-11-22 20:01:58 +01:00
DarioS	c0230eccf7	3dPrinting : - tolleranza di approssimazione curve di slicing portata a 0.1 (MID_TOLER).	2022-11-14 09:27:42 +01:00
SaraP	5494e92e9d	3dPrinting : - aggiunta la possibilità di collegare solo alcuni setti ( prima versione) - correzioni varie.	2022-11-11 09:57:04 +01:00
SaraP	f834d006f6	3dPrinting : - gestione uscite differenziate per regioni con diverse passate.	2022-11-07 10:09:12 +01:00
SaraP	4d74134671	3dPrinting : - correzione lead out setti.	2022-11-03 11:11:23 +01:00
SaraP	549f388227	3dPrinting : - in spiral vase corrette info dell'ultimo layer.	2022-11-03 09:30:00 +01:00
SaraP	15c6563157	3dPrinting : - in spiral vase corretta gestione primo layer.	2022-11-02 15:46:27 +01:00
DarioS	e18e57e7c2	3dPrinting : - modifiche e migliorie per calcolo solidi con uso della nuova funzione lua EgtSurfTmRectSwept.	2022-11-02 15:19:09 +01:00
SaraP	8e75cf21da	3dPrinting : - correzione errori nel caso di pezzo ruotato.	2022-10-28 11:50:19 +02:00
DarioS	9c438d11b6	3dPrinting : - cambiato valore delle costanti SLICING_TYPE.DEG45 = 2 e SLICING_TYPE.HORIZONTAL = 3.	2022-10-28 11:46:56 +02:00
DarioS	781e2d5274	3dPrinting : - piccole modifiche estetiche - salvataggio in TFS di MF e TotalArea.	2022-10-27 22:24:37 +02:00
SaraP	213e6ac6ed	3dPrinting : - aggiunte tipologie per ribs ( interni, esterni, illimitati) - migliorie per ordinamento ribs.	2022-10-26 16:12:25 +02:00
Emmanuele Sassi	aa750ff933	- Cambio formule per costante k passata da unitaria in aggiunta a percentuale totale	2022-10-26 12:28:36 +02:00
Emmanuele Sassi	7ced9ec2f4	- modifiche per assegnazione nome iso da programma	2022-10-24 12:58:26 +02:00
SaraP	d875e31491	3dPrinting : - slicing a 90°.	2022-10-20 17:23:48 +02:00
SaraP	217bb4f26e	3dPrinting : - aggiunti coasting e wipe sui setti che non arrivano al bordo.	2022-10-14 10:55:20 +02:00
DarioS	f05f9c11ae	3dPrinting : - aggiustamento tolleranze per slicing.	2022-10-12 19:08:11 +02:00
SaraP	7792f22242	3dPrinting : - spiral vase (prima versione) - aggiunto controllo sui wipe dei setti.	2022-10-11 16:06:30 +02:00
DarioS	2288078e49	3dPrinting : - corretta verifica necessità ricalcolo solidi.	2022-10-11 09:46:47 +02:00
Emmanuele Sassi	d502770114	- Aggiunta gestione attesa su layer	2022-10-10 16:28:01 +02:00
SaraP	a94474869c	3dPrinting : - modifiche progress bar.	2022-10-03 16:08:25 +02:00
SaraP	5e65055e86	3dPrinting : - correzioni varie.	2022-10-03 12:07:43 +02:00
DarioS	6b2c1834d2	3dPrinting : - correzioni per Extra Shell (estrusione su link e visualizzazione toolpath).	2022-10-02 00:39:42 +02:00
SaraP	00c504c58b	3dPrinting : - correzione errori per regioni con diverse passate.	2022-09-30 15:44:52 +02:00
DarioS	276f8de4f8	3dPrinting : - correzione a calcolo TFS per layer con errori (nome preceduto da __).	2022-09-30 01:10:52 +02:00
DarioS	d1fb754cda	3dPrinting : - tolleranza di slicing portata a 0.5.	2022-09-29 23:03:32 +02:00
Emmanuele Sassi	6fa13da092	Merge branch 'Feature/Icarus'	2022-09-29 21:25:12 +02:00