3dPrinting :

- corretto collegamento fra ribs esterni che passa sotto il solido.

LuaLibs/AddManData.lua

@@ -34,6 +34,7 @@ SURF_LOOP = "SurfLoop"
 MIN_LEN = 0.1
 MIN_AREA = 0.01
 MIN_RIBS_LEN = 2
+MIN_INFILL_LEN = 2
 
 -- Parametri di lavorazione
 SEC_DEFAULT = "Default"
@@ -45,6 +46,7 @@ KEY_SLICING_DIR = "SlicingDir"
 KEY_SLICE_STEP = "StrandH"
 KEY_SHELLS_NBR = "StrandCount"
 KEY_STRAND = "StrandW"
+KEY_INNER_STRAND = "InnerStrandW"
 KEY_STRAND_OVERLAP = "StrandOverlap"
 KEY_OFFSET_SLICE = "Offset"
 KEY_SP_OFFSET_ON_SLICE = "StartPointOffsetOnSlice"
@@ -55,10 +57,6 @@ KEY_TYPE = "Type"
 KEY_LINK_TYPE = "LinkType"
 KEY_LINK_PARAM = "LinkParam"
 KEY_LINK_ZUP = "LinkZup"
-KEY_FLOOR_NBR = "FloorCount"
-KEY_FLOOR_TYPE = "FloorType"
-KEY_CEIL_NBR = "CeilCount"
-KEY_CEIL_TYPE = "CeilType"
 KEY_SPEED = "Speed"
 KEY_FEED = "Feed"
 KEY_EXT_FEED = "ExtFeed"
@@ -81,9 +79,31 @@ KEY_COASTING_FEED = "CoastingFeed"
 KEY_WIPE_LEN = "WipeLen"
 KEY_WIPE_DIR = "WipeDir"
 KEY_WIPE_FEEDPU = "WipeFeedPu"
-KEY_TOOL_DIAM = "ToolDiam" 
+KEY_TOOL_DIAM = "ToolDiam"
+
+-- Solid Fill
+KEY_FLOOR_NBR = "FloorCount"
+KEY_FLOOR_TYPE = "FloorType"
+KEY_CEIL_NBR = "CeilCount"
+KEY_CEIL_TYPE = "CeilType"
+KEY_FILL_TYPE = "FillType"
+
+-- Infill
+KEY_INFILL_STRAND = "InfillStrandW"
+KEY_INFILL_TYPE = "InfillType"
+KEY_INFILL_DENSITY = "InfillDensity"
+KEY_INFILL_LINK = "InfillLink"
+KEY_INFILL_OVERLAP = "InfillOverlap"
+KEY_INFILL_GRID_OVERLAP = "InfillGridOverlap"
+KEY_INFILL_DIR = "InfillDirection"
+KEY_INFILL_OFFSET_X = "InfillOffsetX"
+KEY_INFILL_OFFSET_Y = "InfillOffsetY"
+KEY_INFILL_COASTING = "InfillCoasting"
+KEY_INFILL_WIPE = "InfillWipe"
+KEY_INFILL_WIPE_DIR = "InfillWipeDir"
 
 -- Ribs
+KEY_RIBS_STRAND = "RibsStrandW"
 KEY_RIBS_TYPE = "RibsType"
 KEY_LIMIT_UNBDD_RIBS = "LimitUnboundedRibsWithSolid"
 KEY_RIBS_OVERLAP = "RibsOverlap"
@@ -125,12 +145,21 @@ KEY_EXTRA_SHELL_WIPE = "ExtraShellWipe"
 KEY_EXTRA_SHELL_WIPE_DIR = "ExtraShellWipeDir"
 
 -- Solidi ausiliari
+KEY_AUX_SOLIDS_STRAND = "AuxSolidsStrandW"
+KEY_AUX_SOLIDS_SHELLS_NBR = "AuxSolidsStrandCount"
+KEY_AUX_SOLIDS_OVERLAP = "AuxSolidsOverlap"
 KEY_AUX_SOLIDS_INFILL = "AuxSolidsInfill"
 KEY_AUX_SOLIDS_PRINT_ORDER = "AuxSolidsStrandOrder"
-KEY_AUX_SOLIDS_OVERLAP = "AuxSolidsOverlap"
 KEY_AUX_SOLIDS_LINK_TYPE = "AuxSolidsLinkType"
-KEY_AUX_SOLIDS_SP_OFFSET = "AuxSolidsStartPointOffsetOnSlice"
 KEY_AUX_SOLIDS_LINK_PARAM = "AuxSolidsLinkParam"
+KEY_AUX_SOLIDS_SP_OFFSET = "AuxSolidsStartPointOffsetOnSlice"
+KEY_AUX_SOLIDS_LP_OFFSET = "AuxSolidsOffsetLeadPoint"
+KEY_AUX_SOLIDS_INFILL_LINK = "AuxSolidsInfillLink"
+KEY_AUX_SOLIDS_DENSITY = "AuxSolidsDensity"
+KEY_AUX_SOLIDS_DIR = "AuxSolidsDirection"
+KEY_AUX_SOLIDS_OFFSET_X = "AuxSolidsOffsetX"
+KEY_AUX_SOLIDS_OFFSET_Y = "AuxSolidsOffsetY"
+KEY_AUX_SOLIDS_GRID_OVERLAP = "AuxSolidsGridOverlap"
 KEY_AUX_SOLIDS_COASTING_LEN = "AuxSolidsCoastingLen"
 KEY_AUX_SOLIDS_WIPE_LEN = "AuxSolidsWipeLen"
 KEY_AUX_SOLIDS_WIPE_DIR = "AuxSolidsWipeDir"
@@ -143,6 +172,7 @@ KEY_SPEED_MIN = "SpeedMin"
 KEY_SPEED_MAX = "SpeedMax"
 
 -- Altre chiavi
+KEY_MAX_H = "SlicingHeight"
 KEY_SLICE_NBR = "SliceNbr"
 KEY_SLICE_Z = "SliceZ"
 KEY_SLICE_DELTAZ = "DeltaZ"
@@ -156,7 +186,16 @@ KEY_ASSOCIATED_CRVS = "AssociatedCrvs"
 KEY_ORIGINAL_SURF = "OriginalSurf"
 KEY_HAS_SOLIDS = "Solids"
 KEY_BOX_MIN_Z = "PartBoxMinZ"
-KEY_START_POINT = "StartPoint"
+KEY_ORIGINAL_START_POINT = "OriginalStartPoint"
+KEY_FIRST_SOLID_LAY = "FirstSolidLay"
+KEY_LAST_SOLID_LAY = "LastSolidLay"
+KEY_ASSOCIATED_TP_CRV = "AssociatedToolPathCrv"
+KEY_ASSOCIATED_P_CRV = "AssociatedPathCrv"
+KEY_INTERNAL_SRF_LOOP = "InternalSrfLoop"
+KEY_PREV_CRV = "PrevCrv"
+KEY_NEXT_CRVS = "NextCrvs"
+KEY_CRV_STRAND = "CurveStrand"
+KEY_LAYER_CNT = "LayerCnt"
 
 SLICING_TYPE = {
    VERTICAL = 1,
@@ -202,7 +241,7 @@ PRINT_DIRECTION = {
 LINK_TYPE = {
    NONE = 1,
    LINEAR = 2,
-   BIARC = 3,   
+   BIARC = 3,
 }
 
 LEAD_TYPE = {
@@ -211,10 +250,21 @@ LEAD_TYPE = {
    ARC = 3,
 }
 
-INFILL_TYPE = {
-   NONE = 1,
-   OFFSET = 2,
-   ZIGZAG = 3,
+FILL_CATEGORY = {
+   NONE = 0,
+   SOLID_FILL = 16,
+   INFILL = 32,
+}
+
+FILL_TYPE = {
+   NONE = 0,
+   OFFSET = 16,
+   ZIGZAG = 17,
+   LINES = 32,
+   GRID = 33,
+   ZIG_ZAG_GRID = 34,
+   HONEYCOMB = 35,
+   HONEYCOMB_GRID = 36,
 }
 
 RIB_TYPE = {
@@ -293,9 +343,14 @@ SHELL_NBR_CRV = "ShellNbrRegion"
 SHELL_NBR_SURF = "ShellNbrSurf"
 
 AUX_SOLIDS_GRP = "AuxSolids"
+AUX_SOLIDS_INFILL_GRP = "InfillAuxSolids"
 AUX_SOLIDS_CRV = "AuxSolid"
+AUX_SOLIDS_INFILL_CRV = "InfillAuxSolid"
 AUX_SOLIDS_SRF = "SrfAuxSolid"
 
+INFILL_GRP = "Infill"
+INFILL_CRV = "InfillCrv"
+
 ---------------------------------------------------------------------
 -- parametri calcolo tempi, F ed S
 LAY_TFSCALC = "TFSCalc"

LuaLibs/RunCalcSolids.lua

@@ -20,7 +20,6 @@ local function GetLayerParamsForSolidCalc( nPartId)
    local LayerParams = {}
    LayerParams.bSpiralVase = EgtGetInfo( nPartId, KEY_SPIRAL_VASE, 'b') or false
    LayerParams.dLayHeight = EgtGetInfo( nPartId, KEY_SLICE_STEP, 'd')
-   LayerParams.dStrand = EgtGetInfo( nPartId, KEY_STRAND, 'd')
    LayerParams.vtSlicing = EgtGetInfo( nPartId, KEY_SLICING_DIR, 'v')
    return LayerParams
 end
@@ -192,7 +191,7 @@ local function CreateSolidFromCurve( nCrvId, nSolidGrp, LayerParams, nLayer)
    local nType = EgtGetInfo( nCrvId, KEY_TYPE, 'i')   
    if nType == TYPE.WIPE then return true end 
    -- scelta del colore
-   local Color = EgtStdColor( 'GRAY') 
+   local Color = EgtStdColor( 'GRAY')
    if nType == TYPE.OUTER_SHELL or nType == TYPE.EXTRA_OUTER_SHELL then 
       Color = EgtStdColor( 'TEAL')
    elseif nType == TYPE.INNER_SHELL or nType == TYPE.EXTRA_SHELL then
@@ -203,14 +202,13 @@ local function CreateSolidFromCurve( nCrvId, nSolidGrp, LayerParams, nLayer)
       Color = EgtStdColor( 'YELLOW')
    elseif nType == TYPE.COASTING then
       Color = EgtStdColor( 'BLUE')
-   elseif nType == TYPE.WIPE then
-      Color = EgtStdColor( 'LIME')
    elseif nType == TYPE.RIB then
       Color = EgtStdColor( 'OLIVE')
    elseif nType == TYPE.AUX_SOLID then
       Color = EgtStdColor( 'AQUA')
    end
-
+   local dStrand = EgtGetInfo( nCrvId, KEY_CRV_STRAND, 'd')
+   
    local nCopyId = EgtCopyGlob( nCrvId, nSolidGrp)
    local nId = GDB_ID.NULL
    local nParts = 1
@@ -230,7 +228,7 @@ local function CreateSolidFromCurve( nCrvId, nSolidGrp, LayerParams, nLayer)
    local bOk = true
    for nInd = 0, nParts - 1 do
       local nGuideId = nId + nInd
-      local nSrfId = CreateSolid( nGuideId, nSolidGrp, LayerParams, LayerParams.dStrand - 5 * GEO.EPS_SMALL)
+      local nSrfId = CreateSolid( nGuideId, nSolidGrp, LayerParams, dStrand - 5 * GEO.EPS_SMALL)
       if not nSrfId then
          EgtOutLog( 'Warning : CreateSolid failed '.. '(layer '..tostring( nLayer)..', curve '..tostring( nCrvId)..')')
          -- se non ultima, provo a spostare l'estremità finale
@@ -241,9 +239,9 @@ local function CreateSolidFromCurve( nCrvId, nSolidGrp, LayerParams, nLayer)
                local bOk1 = EgtTrimCurveEndAtLen( nCopyId, LEN_TRIM)
                local bOk2 = EgtAddCurveCompoCurve( nGuideId, nCopyId)
                local bOk3 = EgtTrimCurveStartAtLen( nGuideId + 1, LEN_TRIM)
-               nSrfId = CreateSolid( nGuideId, nSolidGrp, LayerParams, LayerParams.dStrand - 5 * GEO.EPS_SMALL)
+               nSrfId = CreateSolid( nGuideId, nSolidGrp, LayerParams, dStrand - 5 * GEO.EPS_SMALL)
                if not nSrfId then
-                  nSrfId = CreateSolid( nGuideId, nSolidGrp, LayerParams, LayerParams.dStrand - 50 * GEO.EPS_SMALL)
+                  nSrfId = CreateSolid( nGuideId, nSolidGrp, LayerParams, dStrand - 50 * GEO.EPS_SMALL)
                end
             end
          end
@@ -258,7 +256,7 @@ local function CreateSolidFromCurve( nCrvId, nSolidGrp, LayerParams, nLayer)
             if nFirstCrv and nCrvNbr > 1 then
                local nSrfIds = {}
                for nInd2 = 0, nCrvNbr-1 do
-                  local nSrfId2 = CreateSolid( nFirstCrv + nInd2, nSolidGrp, LayerParams, LayerParams.dStrand - 50 * GEO.EPS_SMALL)
+                  local nSrfId2 = CreateSolid( nFirstCrv + nInd2, nSolidGrp, LayerParams, dStrand - 50 * GEO.EPS_SMALL)
                   EgtErase( nFirstCrv + nInd2)
                   if nSrfId2 then
                      table.insert( nSrfIds, nSrfId2)
@@ -279,6 +277,7 @@ local function CreateSolidFromCurve( nCrvId, nSolidGrp, LayerParams, nLayer)
       if nSrfId then
          EgtSetColor( nSrfId, Color)
          EgtSetInfo( nSrfId, KEY_TYPE, nType)
+         EgtSetInfo( nSrfId, KEY_SLICE_NBR, nLayer)
       else 
          bOk = false
          EgtOutLog( 'Warning : CreateSolid_Sewing failed')
@@ -330,7 +329,7 @@ function RunCalcSolids.Exec()
                   local nTPathGrpId = EgtGetFirstNameInGroup( nCrvGrpId, TOOLPATH_GRP) or GDB_ID.NULL
                   if nTPathGrpId == GDB_ID.NULL then
                      EgtOutBox( 'Error no tool paths', 'SolidCalc')
-                     return 
+                     return
                   end
 
                   -- recupero il gruppo dei solidi 

LuaLibs/RunSlicing.lua

@@ -72,6 +72,13 @@ local function RemoveOldSlices( nPartId)
    if nRibsLoopsGrp then
       EgtErase( nRibsLoopsGrp)
    end
+   
+   -- rimuovo eventuali gruppi di infill (anche per aux solids)
+   local nInfillId = EgtGetFirstNameInGroup( nPartId, INFILL_GRP .. '*')
+   while nInfillId do
+      EgtErase( nInfillId)
+      nInfillId = EgtGetFirstNameInGroup( nPartId, INFILL_GRP .. '*')
+   end
 end
 
 ---------------------------------------------------------------------
@@ -150,10 +157,6 @@ function RunSlicing.Exec()
    EgtRemoveAllOperations()
    EgtResetCurrMachGroup()
 
-   -- Lettura dati macchina
-   local sMachIni = EgtGetCurrMachineDir() .. '\\' .. EgtGetCurrMachineName() .. '.ini'
-   local HMax = tonumber( EgtGetStringFromIni( '3dPrinting', 'HMax', 500, sMachIni))
-
    -- Eventuale ripristino posizione originaria
    RestoreOriginalPosition( nPartId)
    
@@ -164,7 +167,7 @@ function RunSlicing.Exec()
    RemoveOldTFS()
   
    -- Calcolo delle fette
-   local bOk = CSLICES.Exec( nPartId, nStmId, HMax)
+   local bOk = CSLICES.Exec( nPartId, nStmId)
    EgtDraw()
 
    -- Calcolo dei percorsi sul centro strand in basso

Version.lua

@@ -1,4 +1,4 @@
--- Version.lua by Egaltech s.r.l. 2023/02/28
+-- Version.lua by Egaltech s.r.l. 2023/08/28
 -- Gestione della versione di 3dPrinting
 
-VERSION = '2.5e2'
+VERSION = '2.5h1'