Modifiche ISO all'inizio lavorazione per gestione ripartenza

- Aggiunti movimenti simulazione cambio utensile

Saomad-KAIROS-MK2.SIEMENS.mlpe

@@ -591,82 +591,178 @@ function OnRapid()
             --EMT.ZMAX = true
             EMT.PREVTOOL = EMT.TOOL
          end
+
+         -- se si spostano i carrelli, si chiude lavorazione precedente
          if bMoveChar then
-            local bStoPre
             if EMT.CHAN2 then
                -- MyEmtOutput( 'WAIT_CHAN(2)')
                MyEmtOutput( 'STOPRE')
-               bStoPre = true
                EMT.CHAN2 = nil
             end
             if EMT.TRAILON then
                MyEmtOutput( 'TRAILOF(X2,X1)')
-               MyEmtOutput( 'STOPRE')
-               MyEmtOutput( 'TRANS')
-               bStoPre = true
                EMT.TRAILON = nil
             end
-            --if not bStoPre then MyEmtOutput( 'STOPRE') end
-            --MyEmtOutput( '')
          end
 
-         -- se c'è un movimento carrelli
-         if bMoveChar then
-            if not EMT.TSELECT then
-               EMT.NSTEP = EMT.NSTEP + 10
-               local sStep = EgtNumToString( EMT.NSTEP, 0)
-               MyEmtOutput( '_STEP='..sStep)
-               local sStep1 = EgtNumToString( EMT.NSTEP + 1, 0)
-               MyEmtOutput( 'GOTOF '..'_N'..sStep1)
-               local sStep = EgtNumToString( EMT.NSTEP, 0)
-               MyEmtOutput( '_N'..sStep..':STOPRE')
-               local sOut = 'PRE_WORK(1,1,' .. EMT.TOOLSEL .. ','..EgtNumToString( EMT.S, 0) ..',,,,)'
-               MyEmtOutput( sOut)
-               EMT.SPEED_ON = true
-               MyEmtOutput( '_N'..sStep1..':STOPRE')
-            end
-            MyEmtOutput( 'WAIT_CHAN(2)')
-         end
-
-         EMT.NSTEP = EMT.NSTEP + 10
-         local sStep = EgtNumToString( EMT.NSTEP, 0)
-         MyEmtOutput( '_STEP='..sStep)
          local sOut = EMT.MCHNAME..'/'..EMT.TOOL
          MyEmtOutput( '\n; *** ' .. sOut .. ' ***')
-         -- movimento carrelli
+         
+         -- se ci sono movimenti carrelli
          EMT.AUXCMD = {}
-         for i = 1, #EMT.AUXSTR do
-            MyEmtOutput( EMT.AUXSTR[i])
+         if EMT.AUXSTR and #EMT.AUXSTR > 0 then
+            EMT.NSTEP = EMT.NSTEP + 10
+            local sStep = EgtNumToString( EMT.NSTEP, 0)
+            MyEmtOutput( '_STEP='..sStep)
+            for i = 1, #EMT.AUXSTR do
+               MyEmtOutput( EMT.AUXSTR[i])
+            end
+            MyEmtOutput( '_N'..sStep..':STOPRE')
          end
+
          EMT.AUXSTR = {}
          EMT.POSTROT = false
          EMT.RELOAD = false
          EMT.RELOAD2 = nil
          EMT.CHAN2 = bMoveChar
+
       end
-      -- se utensile appena selezionato, lo devo dichiarare
-      if EMT.TSELECT then
-         EMT.TSELECT = nil
-         if bMoveChar then
-            local sStep = EgtNumToString( EMT.NSTEP, 0)
-            MyEmtOutput( '_N'..sStep..':STOPRE')
-         end
-         local sOut = 'PRE_WORK(1,1,' .. EMT.TOOLSEL .. ','..EgtNumToString( EMT.S, 0) ..',,,,)'
-         MyEmtOutput( sOut)
-         EMT.SPEED_ON = true
-      -- eventuali emissioni per ripartenza successiva al carico
-      elseif bMoveChar then
-         local sStep1 = EgtNumToString( EMT.NSTEP + 1, 0)
+
+      -- gestione ripartenza
+      EMT.NSTEP = EMT.NSTEP + 10
+      local sStep = EgtNumToString( EMT.NSTEP, 0)
+      MyEmtOutput( '_STEP='..sStep)
+      local sStep1 = EgtNumToString( EMT.NSTEP + 1, 0)
+      if not EMT.LOAD then
          MyEmtOutput( 'GOTOF '..'_N'..sStep1)
-         local sStep = EgtNumToString( EMT.NSTEP, 0)
-         MyEmtOutput( '_N'..sStep..':STOPRE')
-         local sOut = 'PRE_WORK(1,1,' .. EMT.TOOLSEL .. ','..EgtNumToString( EMT.S, 0) ..',,,,)'
-         MyEmtOutput( sOut)
-         EMT.SPEED_ON = true
-         MyEmtOutput( '_N'..sStep1..':STOPRE')
       end
+
+      sStep = EgtNumToString( EMT.NSTEP, 0)
+      MyEmtOutput( '; se ripartenza')
+      MyEmtOutput( '_N'..sStep..':STOPRE')
+      local sOut = 'PRE_WORK(1,1,' .. EMT.TOOLSEL .. ','..EgtNumToString( EMT.S, 0) ..',,,,)'
+      MyEmtOutput( sOut)
       -- eventuale avvio mandrino (se non già avviato)
-      EmitSpeedOn( EMT.S)
+      -- EmitSpeedOn( EMT.S)
+
+      -- si ripete macro di carico con opzione di precarico eseguito
+      if EMT.LOAD then
+         MyEmtOutput( EMT.PRELOADCMD)
+         EMT.PRELOADCMD = nil
+      end
+
+      sOut = 'G1 Y=' .. EgtNumToString( EMT.L2, 3)..' A1='..EgtNumToString( EMT.R2, 3)..' C1='..EgtNumToString( EMT.R1, 3) .. ' F' .. EgtNumToString( FmaxY, 3)
+      MyEmtOutput( sOut)
+
+      if EMT.LOAD then
+         MyEmtOutput( 'WAIT_CHAN(2)')
+         EMT.CHAN2 = nil
+      end
+
+      if EMT.X1DELTA and EMT.X2DELTA then
+         MyEmtOutput( 'GET(X1,X2)')
+         MyEmtOutput( 'STOPRE')
+         MyEmtOutput( 'TRAILON(X2,X1)')
+         EMT.TRAILON = true
+      elseif EMT.X1DELTA then
+         MyEmtOutput( 'GET(X1)')
+      elseif EMT.X2DELTA then
+         MyEmtOutput( 'GET(X2)')
+      end
+
+      -- se stato pinza attiva non coerente con master, si riscrivono gli assi
+      if EMT.X1DELTA  then
+         MyEmtOutput( 'GEOAX(1,X1,2,Y1,3,Z1)')
+         MyEmtOutput( 'G90 G17')
+      elseif EMT.X2DELTA then
+         MyEmtOutput( 'GEOAX(1,X2,2,Y1,3,Z1)')
+         MyEmtOutput( 'G90 G17')
+      end
+
+      if not EMT.LOAD then
+         local sStep2 = EgtNumToString( EMT.NSTEP + 2, 0)
+         MyEmtOutput( 'GOTOF '..'_N'..sStep2)
+         MyEmtOutput( '; ciclo standard')
+         MyEmtOutput( '_N'..sStep1..':STOPRE')
+         if EMT.TSELECT then
+            sOut = 'PRE_WORK(1,1,' .. EMT.TOOLSEL .. ','..EgtNumToString( EMT.S, 0) ..',,,,)'
+            MyEmtOutput( sOut)
+         end
+
+         if bMoveChar then
+            sOut = 'G1 Y=' .. EgtNumToString( EMT.L2, 3)..' A1='..EgtNumToString( EMT.R2, 3)..' C1='..EgtNumToString( EMT.R1, 3) .. ' F' .. EgtNumToString( FmaxY, 3)
+            MyEmtOutput( sOut)
+            MyEmtOutput( 'WAIT_CHAN(2)')
+
+            -- dopo aver spostato i carrelli, lancio precarico
+            -- se taglio di coda senza residuo da scaricare, emetto macro per accelerare il carico della barra successiva
+            if EMT.MCHUSERNOTES and EMT.MCHUSERNOTES:find( 'Cut') and not EMT.PRELOAD then
+               EMT.PRELOAD = true
+               MyEmtOutput( '_POSIZ_T(4,,,,,,,,,)')  -- Lancio macro per carico anticipato: i valori sono presi dal plc (passati dall'interfaccia)
+            end
+
+            EMT.CHAN2 = nil
+            if EMT.X1DELTA and EMT.X2DELTA then
+               MyEmtOutput( 'GET(X1,X2)')
+               MyEmtOutput( 'STOPRE')
+               MyEmtOutput( 'TRAILON(X2,X1)')
+               EMT.TRAILON = true
+            elseif EMT.X1DELTA then
+               MyEmtOutput( 'GET(X1)')
+            elseif EMT.X2DELTA then
+               MyEmtOutput( 'GET(X2)')
+            end
+            -- se stato pinza attiva non coerente con master, si riscrivono gli assi
+            if EMT.X1DELTA or EMT.X2DELTA then
+               if EMT.X1DELTA and not EMT.X1MASTER then
+                  EMT.X1MASTER = true
+                  MyEmtOutput( 'GEOAX(1,X1,2,Y1,3,Z1)')
+                  MyEmtOutput( 'G90 G17')
+               elseif EMT.X2DELTA and ( EMT.X1MASTER and not EMT.X1DELTA) then
+                  EMT.X1MASTER = false
+                  MyEmtOutput( 'GEOAX(1,X2,2,Y1,3,Z1)')
+                  MyEmtOutput( 'G90 G17')
+               end
+            end
+            -- primo posizionamento carrello rispetto a 0M
+            if EMT.X1DELTA then
+               local dPosX1 = EMT.L1 + EMT.X1DELTA
+               sOut = 'G1 X' .. EmtLenToString( dPosX1, 3) .. ' F' .. GetClampFeed( EMT.LENGTHBEAM)
+               MyEmtOutput( sOut)
+            elseif EMT.X2DELTA then
+               local dPosX2 = EMT.L1 + EMT.X2DELTA
+               sOut = 'G1 X' .. EmtLenToString( dPosX2, 3) .. ' F' .. GetClampFeed( EMT.LENGTHBEAM)
+               MyEmtOutput( sOut)
+            else
+               EmtSetLastError( 1213, "Part to machine without charriots")
+            end
+         else
+            -- movimento di tutti gli assi assieme
+            if EMT.X1DELTA then
+               local dPosX1 = EMT.L1 + EMT.X1DELTA
+               sOut = 'G1 X=' .. EmtLenToString( dPosX1, 3) .. ' Y=' .. EgtNumToString( EMT.L2, 3)..
+                        ' A1='..EgtNumToString( EMT.R2, 3).. ' C1='..EgtNumToString( EMT.R1, 3).. ' F' .. GetClampFeed( EMT.LENGTHBEAM)
+               MyEmtOutput( sOut)
+            elseif EMT.X2DELTA then
+               local dPosX2 = EMT.L1 + EMT.X2DELTA
+               sOut = 'G1 X' .. EmtLenToString( dPosX2, 3) .. ' Y=' .. EgtNumToString( EMT.L2, 3)..
+                        ' A1='..EgtNumToString( EMT.R2, 3).. ' C1='..EgtNumToString( EMT.R1, 3).. ' F' .. GetClampFeed( EMT.LENGTHBEAM)
+               MyEmtOutput( sOut)
+            else
+               EmtSetLastError( 1213, "Part to machine without charriots")
+            end
+
+            -- se ho lanciato split in modo asincrono, dopo POSIZ_YAC devo attendere
+            if EMT.WAIT_SPLIT then
+               MyEmtOutput( 'WAITP(X1)')
+               EMT.WAIT_SPLIT = nil
+            end
+         end
+
+         MyEmtOutput( '_N'..sStep2..':STOPRE')
+      end
+
+
       -- primo posizionamento testa rispetto a 0M
       EmtResetPrev()
       -- sega a catena da gestire
@@ -678,99 +774,8 @@ function OnRapid()
       -- local dFeedY, dFeedA, dFeedC = CalcFeedYAC( EMT.L2opp - EMT.L2, EMT.R2pp - EMT.R2, EMT.R1pp - EMT.R1)
       -- sOut = '_POSIZ_YAC('..EgtNumToString( EMT.L2, 3)..','..EgtNumToString( EMT.R2, 3)..','..EgtNumToString( EMT.R1, 3)..','.. EgtNumToString( FmaxY, 0)..',,)'
 
-
-      -- si ripete macro di carico con opzione di precarico eseguito
-      if EMT.LOAD then
-         MyEmtOutput( EMT.PRELOADCMD)
-         EMT.PRELOADCMD = nil
-      end
-
-      -- se si sono spostati i carrelli
-      if bMoveChar then
-         --MyEmtOutput( 'TRANS')
-         local sOut = 'G1 Y=' .. EgtNumToString( EMT.L2, 3)..' A1='..EgtNumToString( EMT.R2, 3)..' C1='..EgtNumToString( EMT.R1, 3) .. ' F' .. EgtNumToString( FmaxY, 3)
-         MyEmtOutput( sOut)
-      end
-
-
       EMT.LOAD = false
 
-      -- se ho lanciato split in modo asincrono, dopo POSIZ_YAC devo attendere
-      if EMT.WAIT_SPLIT then
-         MyEmtOutput( 'WAITP(X1)')
-         EMT.WAIT_SPLIT = nil
-      end
-
-      -- se necessario, attesa fine movimenti carrelli e presa assi relativi
-      if bMoveChar then
-         MyEmtOutput( 'WAIT_CHAN(2)')
-         EMT.CHAN2 = nil
-
-         if EMT.X1DELTA and EMT.X2DELTA then
-            MyEmtOutput( 'GET(X1,X2)')
-            MyEmtOutput( 'STOPRE')
-            MyEmtOutput( 'TRAILON(X2,X1)')
-            EMT.TRAILON = true
-         elseif EMT.X1DELTA then
-            MyEmtOutput( 'GET(X1)')
-         elseif EMT.X2DELTA then
-            MyEmtOutput( 'GET(X2)')
-         end
-      end
-
-      -- se stato pinza attiva non coerente con master, si riscrivono gli assi
-      if EMT.X1DELTA or EMT.X2DELTA then
-         if EMT.X1DELTA and not EMT.X1MASTER then
-            EMT.X1MASTER = true
-            MyEmtOutput( 'GEOAX(1,X1,2,Y1,3,Z1)')
-            MyEmtOutput( 'G90 G17')
-         elseif EMT.X2DELTA and ( EMT.X1MASTER and not EMT.X1DELTA) then
-            EMT.X1MASTER = false
-            MyEmtOutput( 'GEOAX(1,X2,2,Y1,3,Z1)')
-            MyEmtOutput( 'G90 G17')
-         end
-      end
-
-      -- dopo aver spostato i carrelli, lancio precarico
-      -- se taglio di coda senza residuo da scaricare, emetto macro per accelerare il carico della barra successiva
-      if EMT.MCHUSERNOTES and EMT.MCHUSERNOTES:find( 'Cut') and not EMT.PRELOAD then
-         EMT.PRELOAD = true
-         MyEmtOutput( '_POSIZ_T(4,,,,,,,,,)')  -- Lancio macro per carico anticipato: i valori sono presi dal plc (passati dall'interfaccia)
-      end
-
-      -- se si sono mossi i carrelli
-      if bMoveChar then
-         -- primo posizionamento carrello rispetto a 0M
-         if EMT.X1DELTA then
-            local dPosX1 = EMT.L1 + EMT.X1DELTA
-            local sOut = 'G1 X' .. EmtLenToString( dPosX1, 3) .. ' F' .. GetClampFeed( EMT.LENGTHBEAM)
-            MyEmtOutput( sOut)
-         elseif EMT.X2DELTA then
-            local dPosX2 = EMT.L1 + EMT.X2DELTA
-            local sOut = 'G1 X' .. EmtLenToString( dPosX2, 3) .. ' F' .. GetClampFeed( EMT.LENGTHBEAM)
-            MyEmtOutput( sOut)
-         else
-            EmtSetLastError( 1213, "Part to machine without charriots")
-         end
-      else
-         -- MyEmtOutput( 'TRANS')
-         -- assegnazione assi geometrici (GEOAX)
-         -- primo posizionamento carrello rispetto a 0M
-         if EMT.X1DELTA then
-            local dPosX1 = EMT.L1 + EMT.X1DELTA
-            local sOut = 'G1 X=' .. EmtLenToString( dPosX1, 3) .. ' Y=' .. EgtNumToString( EMT.L2, 3)..
-                     ' A1='..EgtNumToString( EMT.R2, 3).. ' C1='..EgtNumToString( EMT.R1, 3).. ' F' .. GetClampFeed( EMT.LENGTHBEAM)
-            MyEmtOutput( sOut)
-         elseif EMT.X2DELTA then
-            local dPosX2 = EMT.L1 + EMT.X2DELTA
-            local sOut = 'G1 X' .. EmtLenToString( dPosX2, 3) .. ' Y=' .. EgtNumToString( EMT.L2, 3)..
-                     ' A1='..EgtNumToString( EMT.R2, 3).. ' C1='..EgtNumToString( EMT.R1, 3).. ' F' .. GetClampFeed( EMT.LENGTHBEAM)
-            MyEmtOutput( sOut)
-         else
-            EmtSetLastError( 1213, "Part to machine without charriots")
-         end
-      end
-
       -- se taglio di separazione prima di scarico a caduta, emissione stop tappeto scarico trucioli
       if EMT.PREFALLCUT then
          MyEmtOutput( ';M29')
@@ -779,6 +784,7 @@ function OnRapid()
       EMT.REFLOC = 0
       EMT.MCHFIRST = false
       EMT.ZMAX = false
+      EMT.TSELECT = false
 
       -- se alto in Z (non serve l'avvicinamento finale)
       if EMT.FLAG == 2 then
@@ -790,7 +796,6 @@ function OnRapid()
       else
          MyRestoreAxes()
       end
-
    end
    -- se standard
    if EMT.FLAG == 0 or EMT.FLAG == 1 or EMT.FLAG == 2 then
@@ -1093,7 +1098,7 @@ function PrepareMoveChar( sCmd)
       if Cmd[2] == '0' and EMT.X1CLAMP then
          EMT.X1CLAMP = nil
          table.insert( CLAMP_POS, 'GRIPPER("AP1",,)')
-      elseif not EMT.X1CLAMP and Cmd[2] ~= '0' then
+      elseif ( not EMT.X1CLAMP or not EMT.X1DELTA) and Cmd[2] ~= '0' then
          EMT.X1CLAMP = true
          local sVertClamp = EgtIf( Cmd[2] == '2', '1', '0')
          table.insert( CLAMP_POS, 'GRIPPER("CH1",'.. sVertClamp ..',2.5)')
@@ -1102,7 +1107,7 @@ function PrepareMoveChar( sCmd)
       if Cmd[2] == '0' and EMT.X2CLAMP then
          EMT.X2CLAMP = nil
          table.insert( CLAMP_POS, 'GRIPPER("AP2",,)')
-      elseif not EMT.X2CLAMP and Cmd[2] ~= '0' then
+      elseif ( not EMT.X2CLAMP or not EMT.X2DELTA) and Cmd[2] ~= '0' then
          EMT.X2CLAMP = true
          local sVertClamp = EgtIf( Cmd[2] == '2', '1', '0')
          table.insert( CLAMP_POS, 'GRIPPER("CH2",'.. sVertClamp ..',2.5)')
@@ -1337,28 +1342,28 @@ function PrepareUnload( sCmd)
             local sStep = EgtNumToString( EMT.NSTEP, 0)
             local sOut = '_STEP='..sStep
             table.insert( EMT.AUXSTR, sOut)
+            sOut = '_N'..sStep..':STOPRE'
+            table.insert( EMT.AUXSTR, sOut)
             local sX2Pos =  Cmd[3]
             sOut = string.format( 'POS[X2]=%s FA[X2]=%d', sX2Pos, EMT.FMAXPINZE)
             table.insert( EMT.AUXSTR, sOut)
-            sOut = '_POSIZ_T(5,,,,,3,,,,)'  -- discesa blocco pezzo
-            table.insert( EMT.AUXSTR, sOut)
-            sOut = '_N'..sStep..':STOPRE\n'
+            sOut = '_POSIZ_T(5,,,,,3,,,,)\n'  -- discesa blocco pezzo
             table.insert( EMT.AUXSTR, sOut)
             EMT.NSTEP = EMT.NSTEP + 10
             sStep = EgtNumToString( EMT.NSTEP, 0)
             sOut = '_STEP='..sStep
             table.insert( EMT.AUXSTR, sOut)
-            sOut = '_POSIZ_T(5,,,,,4,,,,)'  -- pistone scarico avanti per spingere pezzo
+            sOut = '_N'..sStep..':STOPRE'
             table.insert( EMT.AUXSTR, sOut)
-            sOut = '_N'..sStep..':STOPRE\n'
+            sOut = '_POSIZ_T(5,,,,,4,,,,)\n'  -- pistone scarico avanti per spingere pezzo
             table.insert( EMT.AUXSTR, sOut)
             EMT.NSTEP = EMT.NSTEP + 10
             sStep = EgtNumToString( EMT.NSTEP, 0)
             sOut = '_STEP='..sStep
             table.insert( EMT.AUXSTR, sOut)
-            sOut = '_POSIZ_T(5,,,,,5,,,,)'  -- pistone scarico indietro
+            sOut = '_N'..sStep..':STOPRE'
             table.insert( EMT.AUXSTR, sOut)
-            sOut = '_N'..sStep..':STOPRE\n'
+            sOut = '_POSIZ_T(5,,,,,5,,,,)\n'  -- pistone scarico indietro
             table.insert( EMT.AUXSTR, sOut)
          end
       elseif Cmd[1] == '2' then
@@ -1366,10 +1371,10 @@ function PrepareUnload( sCmd)
          local sStep = EgtNumToString( EMT.NSTEP, 0)
          local sOut = '_STEP='..sStep
          table.insert( EMT.AUXSTR, sOut)
-         local sX2Pos = Cmd[5]
-         sOut = string.format( 'POS[X2]=%s FA[X2]=%d', sX2Pos, EMT.FMAXPINZE)
+         sOut = '_N'..sStep..':STOPRE'
          table.insert( EMT.AUXSTR, sOut)
-         sOut = '_N'..sStep..':STOPRE\n'
+         local sX2Pos = Cmd[5]
+         sOut = string.format( 'POS[X2]=%s FA[X2]=%d\n', sX2Pos, EMT.FMAXPINZE)
          table.insert( EMT.AUXSTR, sOut)
       elseif Cmd[1] == '3' then
          -- non gestito
@@ -1380,17 +1385,17 @@ function PrepareUnload( sCmd)
          local sStep = EgtNumToString( EMT.NSTEP, 0)
          local sOut = '_STEP='..sStep
          table.insert( EMT.AUXSTR, sOut)
-         sOut = '_POSIZ_T(5,,,,,1,,,,)'  -- apre pinza 2
+         sOut = '_N'..sStep..':STOPRE'
          table.insert( EMT.AUXSTR, sOut)
-         sOut = '_N'..sStep..':STOPRE\n'
+         sOut = '_POSIZ_T(5,,,,,1,,,,)\n'  -- apre pinza 2
          table.insert( EMT.AUXSTR, sOut)
          EMT.NSTEP = EMT.NSTEP + 10
          sStep = EgtNumToString( EMT.NSTEP, 0)
          sOut = '_STEP='..sStep
          table.insert( EMT.AUXSTR, sOut)
-         sOut = '_POSIZ_T(5,,,,,2,,,,)'  -- solleva il blocca-pezzo
+         sOut = '_N'..sStep..':STOPRE'
          table.insert( EMT.AUXSTR, sOut)
-         sOut = '_N'..sStep..':STOPRE\n'
+         sOut = '_POSIZ_T(5,,,,,2,,,,)\n'  -- solleva il blocca-pezzo
          table.insert( EMT.AUXSTR, sOut)
       elseif Cmd[1] == '21' then
          -- non interessa
@@ -1795,7 +1800,7 @@ function CreateClampingFile()
          local nReposNumber = i * 100
          local nReposNumber2 = (i + 1) * 100
          nfile:write( '\nIF ((_STEP3>=' .. EgtNumToString( nReposNumber) ..') AND (_STEP3<'.. EgtNumToString( nReposNumber2)  .. '))\n')
-         nfile:write( '  IF _STEP3<>' .. EgtNumToString( nReposNumber) ..' GOTOF JUMP3\n')
+         nfile:write( '  IF _STEP3<>' .. EgtNumToString( nReposNumber) ..'\n    G4F2\n    GOTOF JUMP3\n  ENDIF\n')
          local nInternalStep = 0
          for j = 1, #ALL_CLAMP_POS[i] do
             -- comando speciale per aggiungere etichetta per ripartenza

Saomad-KAIROS-MK2.mlde

@@ -9,7 +9,7 @@
 require( 'EmtGenerator')
 EgtEnableDebug( false)
 
-PP_VER = '3.1d1_DEV10'
+PP_VER = '3.1e1_DEV4'
 MIN_MACH_VER = '3.1c1'
 
 EgtOutLog ( '** Saomad-KAIROS '..PP_VER..' (MinMach '.. MIN_MACH_VER ..') **', 1)
@@ -19,7 +19,7 @@ NumericalControl = 'SIEMENS'
 ChainSaw = false
 MinY = -823
 MaxY = 520
-ParkY = 400
+ParkY = -125
 FmaxY = 45000
 MinZ = -298
 MaxZ = 915
@@ -30,6 +30,8 @@ MaxA = 120
 MinSawA = -101
 MaxSawA = 101
 ParkA = 0
+TakePosTC_R = -90
+TakePosTC_L = 90
 FmaxA = 10440
 MinC = -240
 MaxC = 240

Saomad-KAIROS-MK2.mlpe

@@ -504,6 +504,10 @@ function OnSimulToolSelect( dPosCS)
    EMT.TCPOS_1 = EMT.TCPOS
    -- lo nascondo sul portautensili
    ShowToolInTcPos( EMT.TCPOS, false)
+   -- movimento di uscita dal porta utensile
+   if EMT.HEAD == 'H1' or EMT.HEAD == 'H2' then
+      SimulMoveAxes( 'Y', ParkY, MCH_SIM_STEP.RAPID, 'A', ParkA, MCH_SIM_STEP.RAPROT, 'C', ParkC, MCH_SIM_STEP.RAPROT)
+   end
 end
 
 ---------------------------------------------------------------------
@@ -522,30 +526,39 @@ function OnSimulToolDeselect()
          else
             SimulMoveAxes( 'A', ParkA, MCH_SIM_STEP.COLLROT, 'C', GetChainSawCHomeFromVirtualAxis( dPosCS), MCH_SIM_STEP.COLLROT)
          end
-         SimulMoveAxis( 'Y', ParkY, MCH_SIM_STEP.RAPID)
+      elseif EMT.HEAD == 'H2' then
+         SimulMoveAxes( 'A', TakePosTC_R, MCH_SIM_STEP.COLLROT, 'C', ParkC, MCH_SIM_STEP.COLLROT)
+      elseif EMT.HEAD == 'H1' then
+         SimulMoveAxes( 'A', TakePosTC_L, MCH_SIM_STEP.COLLROT, 'C', ParkC, MCH_SIM_STEP.COLLROT)
       end
+      SimulMoveAxis( 'Y', MinY, MCH_SIM_STEP.RAPID)
       -- breve pausa
       EgtPause( 100)
       -- nascondo utensile su testa e lo visualizzo su TcPos
       EgtSetMode( EgtGetHeadId( EMT.HEAD), GDB_MD.HIDDEN)
       ShowToolInTcPos( EMT.TCPOS_1, true)
       -- movimento per carico utensile
-      SimulMoveAxes( 'A', ParkA, MCH_SIM_STEP.RAPROT, 'C', ParkC, MCH_SIM_STEP.RAPROT)
+      --SimulMoveAxes( 'Y', ParkY, MCH_SIM_STEP.RAPID, 'A', ParkA, MCH_SIM_STEP.RAPROT, 'C', ParkC, MCH_SIM_STEP.RAPROT)
       EgtOutText( '')
    -- deposito utensile
    else
       if EMT.NEXTTOOL ~= EMT.TOOL_1 then
          EgtOutText( 'Tool change in progress...')
          -- simulo movimento
-         SimulMoveAxes( 'A', ParkA, MCH_SIM_STEP.COLLROT, 'C', ParkC, MCH_SIM_STEP.COLLROT)
-         SimulMoveAxis( 'Y', ParkY, MCH_SIM_STEP.RAPID)
+         if EMT.HEAD == 'H2' then
+            SimulMoveAxes( 'A', TakePosTC_R, MCH_SIM_STEP.COLLROT, 'C', ParkC, MCH_SIM_STEP.COLLROT)
+         elseif EMT.HEAD == 'H1' then
+            SimulMoveAxes( 'A', TakePosTC_L, MCH_SIM_STEP.COLLROT, 'C', ParkC, MCH_SIM_STEP.COLLROT)
+         end
+         SimulMoveAxis( 'Y', MinY, MCH_SIM_STEP.RAPID)
          -- breve pausa
          EgtPause( 100)
+         -- nascondo utensile su testa e lo visualizzo su TcPos
+         EgtSetMode( EgtGetHeadId( EMT.HEAD), GDB_MD.HIDDEN)
          ShowToolInTcPos( EMT.TCPOS_1, true)
-          -- nascondo l'utensile corrente
-          EgtSetStatus( EgtGetHeadId( EMT.HEAD), GDB_ST.OFF)
-          -- eseguo movimento opportuno
-          SimulMoveAxes( 'A', ParkA, MCH_SIM_STEP.RAPROT, 'C', ParkC, MCH_SIM_STEP.RAPROT)
+         EgtOutText( '')
+         -- eseguo movimento opportuno
+         --SimulMoveAxes( 'A', ParkA, MCH_SIM_STEP.RAPROT, 'C', ParkC, MCH_SIM_STEP.RAPROT)
       else
          EMT.TOOL_1 = nil
          EMT.TCPOS_1 = nil