-corretto condizione photodir in mainwindowm

CompoWindow/CompoWindowVM.vb

@@ -146,7 +146,7 @@ Public Class CompoWindowVM
 
    Friend Function MakePreview(ByRef sMsg As String) As Boolean
       If Not EgtLuaExecLine(LUA_CMP_DRAW & "(true)") Then
-         sMsg = "Error in component execution"
+         sMsg = EgtMsg(91689)   ' Error in component execution
          m_bDrawOk = False
       Else
          EgtLuaGetGlobStringVar(LUA_CMP_VARS & ".MSG", sMsg)

Constants/ConstIni.vb

@@ -37,6 +37,7 @@ Module ConstIni
    Public Const K_CONTOURFROMCAMERA As String = "ContourFromCamera"
    Public Const K_SUPPORT As String = "Support"
    Public Const K_PHOTODIR As String = "PhotoDir"
+   Public Const K_SHOWNBARROW As String = "ShowNbArrow"
 
    Public Const S_LANGUAGES As String = "Languages"
    Public Const K_LANGUAGE As String = "Language"
@@ -96,6 +97,7 @@ Module ConstIni
 
    Public Const S_SIDES As String = "Sides"
    Public Const K_MAXSIDEANGLE As String = "MaxSideAngle"
+   Public Const K_SIZEALWAYSONTOP As String = "SizeAlwaysOnTop"
    Public Const K_PARSIDE_AS_TRF As String = "ParSideAsTrf"
    Public Const K_SIDEANGLE As String = "SideAngle"
    Public Const K_DELTA_ANG_TG As String = "DeltaAngTg"

EgtStoneLib/CamAuto.vb

@@ -1,5 +1,6 @@
 Imports System.Security.Cryptography
 Imports EgtUILib
+Imports EgtWPFLib5
 
 Friend Module CamAuto
 
@@ -25,9 +26,12 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.Add")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
+         OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(91017), MSG_TYPE.WARNING)
       End If
       ResetOrderMachiningFlag()
       Return bOk
@@ -43,9 +47,34 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.AddWaterJet")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+         ' m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
+      End If
+      Return bOk
+   End Function
+
+   ' versione CamAuto 2.6l1: gestione tagli con ridotto affondamento
+   Friend Function AddWaterJetMachining(LocaList As List(Of Integer), ByRef nWarn As Integer) As Boolean
+      EgtLuaCreateGlobTable("CAM")
+      SetLuaStandardCamParams()
+      For i As Integer = 0 To LocaList.Count - 1
+         EgtLuaSetGlobIntVar("CAM.TAB_OPERID." & (i + 1).ToString, LocaList(i))
+      Next
+      Dim nErr As Integer = 999
+      Dim bOk As Boolean = EgtLuaExecFile(m_sCamAutoDir & "\CamAuto.lua")
+      bOk = bOk AndAlso EgtLuaGetGlobIntVar("CAM.ERR", nErr) AndAlso nErr = 0
+      bOk = bOk AndAlso EgtLuaCallFunction("CAM.AddWaterJets")
+      EgtLuaGetGlobIntVar("CAM.ERR", nErr)
+      EgtLuaResetGlobVar("CAM")
+      If nErr > 0 Then
+         bOk = False
+         EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -59,9 +88,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.Erase")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       ResetOrderMachiningFlag()
       Return bOk
@@ -76,9 +107,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.InvertVerticalCut")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -89,6 +122,7 @@ Friend Module CamAuto
    End Function
 
    Friend Function ResetAllMachinings(ByRef nWarn As Integer) As Boolean
+      EgtOutLog(" ++ ReserAllMachining ++ ")
       ' Cancello tutte le lavorazioni
       EraseMachinings(GDB_ID.NULL)
       ' Reinserisco tutte le lavorazioni piane (non sono previste le lavorazioni delle cornici)
@@ -273,9 +307,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.UpdateAllTp")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -289,9 +325,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.Sort")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       Return bOk
    End Function
@@ -306,9 +344,11 @@ Friend Module CamAuto
       bOk = bOk AndAlso EgtLuaCallFunction("CAM.SpecApplyDisp")
       EgtLuaGetGlobIntVar("CAM.ERR", nErr)
       EgtLuaResetGlobVar("CAM")
-      If nErr <> 0 Then
+      If nErr > 0 Then
          bOk = False
          EgtOutLog("Error in CamAuto : " & nErr.ToString())
+      ElseIf nErr < 0 Then
+         EgtOutLog("Warning in CamAuto : " & nErr.ToString())
       End If
       If ResetOrderMachiningFlag() Then
          ResetOrderMachiningFlag()
@@ -451,6 +491,7 @@ Friend Module CamAuto
       Return EgtRemoveOperationHome(nId)
    End Function
 
+   ' DA AGGIORNARE PER CAMBIO UTENSILE LAMA
    Friend Function VerifySetup(ByRef sMissingTools As String) As Boolean
       Dim bOk As Boolean = True
       Dim bIsMultiCut = (EgtGetHeadId("H101") <> GDB_ID.NULL)
@@ -545,6 +586,7 @@ Friend Module CamAuto
       Dim dReducedDepth As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_REDUCEDDEPTH, 1, CurrentMachine.sMachIniFile)
       ' Ciclo sulle lavorazioni
       Dim nOperId As Integer = EgtGetFirstOperation()
+      Dim LocalListOperId As New List(Of Integer)
       While nOperId <> GDB_ID.NULL
          ' verifico sia una lavorazione valida di taglio con lama
          If IsValidMachining(nOperId) And EgtGetOperationType(nOperId) = MCH_OY.SAWING Then
@@ -559,12 +601,14 @@ Friend Module CamAuto
                ' se abilitato e attivo waterjet, lo aggiungo per completare il taglio
                If CurrentMachine.WaterJettingActive Then
                   Dim nWarn As Integer = 0
-                  AddWaterJetMachining(nOperId, nWarn)
+                  LocalListOperId.Add(nOperId)
+                  'AddWaterJetMachining(nOperId, nWarn)
                End If
             End If
          End If
          nOperId = EgtGetNextOperation(nOperId)
       End While
+      If LocalListOperId.Count > 0 Then AddWaterJetMachining(LocalListOperId, 0)
       Return bModified
    End Function
 
@@ -859,6 +903,7 @@ Friend Module CamAuto
    Private Function SetLuaStandardCamParams(Optional bDripOk As Boolean = True) As Boolean
       Dim sMaterial As String = CurrentMachine.CurrMat.sName
       Dim sSawMch As String = CurrentMachine.sCurrSawing
+      Dim sSawTiltedMch As String = CurrentMachine.sCurrSawingTilted
       Dim sMillMch As String = CurrentMachine.sCurrMilling
       Dim sDrillMch As String = CurrentMachine.sCurrDrilling
       Dim sWaterJetMch As String = CurrentMachine.sCurrWaterJetting
@@ -876,6 +921,7 @@ Friend Module CamAuto
       Dim dMillingShort As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, CurrentMachine.sMachIniFile)
       EgtLuaSetGlobStringVar("CAM.MATERIAL", sMaterial)
       EgtLuaSetGlobStringVar("CAM.SAWMCH", sSawMch)
+      EgtLuaSetGlobStringVar("CAM.SAWTILTEDMCH", sSawTiltedMch)
       EgtLuaSetGlobStringVar("CAM.MILLMCH", sMillMch)
       EgtLuaSetGlobStringVar("CAM.DRILLMCH", sDrillMch)
       EgtLuaSetGlobStringVar("CAM.WATERJETMCH", sWaterJetMch)
@@ -896,24 +942,29 @@ Friend Module CamAuto
       Return True
    End Function
 
+   ' ver. 2.7f1 
    Friend Function GetTableCount() As Integer
       If EgtGetTableId(MAIN_TAB) = GDB_ID.NULL Then Return 0
       If EgtGetTableId(SECOND_TAB) = GDB_ID.NULL Then Return 1
       If EgtGetTableId(THIRD_TAB) = GDB_ID.NULL Then Return 2
-      Return 3
+      If EgtGetTableId(FORTH_TAB) = GDB_ID.NULL Then Return 3
+      Return 4
    End Function
 
    Friend Function GetTableName(nInd As Integer) As String
       If nInd = 1 Then Return MAIN_TAB
       If nInd = 2 Then Return SECOND_TAB
       If nInd = 3 Then Return THIRD_TAB
+      If nInd = 4 Then Return FORTH_TAB
       Return ""
    End Function
 
    Friend Function GetCurrentTable() As Integer
       Dim sTabName As String = MAIN_TAB
       EgtGetTableName(sTabName)
-      If sTabName = THIRD_TAB Then
+      If sTabName = FORTH_TAB Then
+         Return 4
+      ElseIf sTabName = THIRD_TAB Then
          Return 3
       ElseIf sTabName = SECOND_TAB Then
          Return 2

EgtStoneLib/ConstMach.vb

@@ -48,6 +48,7 @@ Module ConstMach
    Public Const MAIN_TAB As String = "MainTab"
    Public Const SECOND_TAB As String = "2ndTab"
    Public Const THIRD_TAB As String = "3rdTab"
+   Public Const FORTH_TAB As String = "4thTab"
    ' Nome tavola ausiliaria per spostamento finale pezzi
    Public Const AUX_TAB As String = "AuxTab"
 
@@ -166,6 +167,7 @@ Module ConstMach
    ' Info in entità da tagliare per affondamento
    Public Const INFO_DEPTH As String = "Depth"
    Public Const INFO_DEPTH2 As String = "Depth2"
+   Public Const INFO_AGG2 As String = "Agg2"
    Public Const INFO_WIDTH As String = "Width"
    ' Info in entità da tagliare per taglio ristretto
    Public Const INFO_STRICT As String = "Strict"

EgtStoneLib/ConstMachIni.vb

@@ -240,6 +240,7 @@
 
    Public Const S_MACH_MACH As String = "Mach"
    Public Const K_CURRSAW As String = "CurrSaw"
+   Public Const K_CURRSAWTILTED As String = "CurrSawTilted"
    Public Const K_CURRDRILL As String = "CurrDrill"
    Public Const K_CURRMILL As String = "CurrMill"
    Public Const K_CURRMILLNOTIP As String = "CurrMillNoTip"
@@ -247,6 +248,7 @@
    Public Const K_CURRDRIPDRILL As String = "CurrDripDrill"
    Public Const K_CURRWATERJET As String = "CurrWaterJet"
    Public Const K_CURRSAWING As String = "CurrSawing"
+   Public Const K_CURRSAWINGTILTED As String = "CurrSawingTilted"
    Public Const K_CURRSAWING_OFFICE As String = "CurrOfficeSawing"
    Public Const K_CURRDRILLING As String = "CurrDrilling"
    Public Const K_CURRDRILLING_OFFICE As String = "CurrOfficeDrilling"

EgtStoneLib/CurrentMachine.vb

@@ -107,6 +107,7 @@ Public Module CurrentMachine
 
    ' Variabili che contengono il nome degli utensili disponibili per tipo
    Private m_sCurrSaw As String = String.Empty
+   Private m_sCurrSawTilted As String = String.Empty
    Private m_sCurrDrill As String = String.Empty
    Private m_sCurrMill As String = String.Empty
    Private m_sCurrMillNoTip As String = String.Empty
@@ -116,6 +117,7 @@ Public Module CurrentMachine
 
    ' Variabili che contengono le lavorazioni correntemente attive (utilizzate per definire lavorazioni nel programma)
    Private m_sCurrSawing As String = String.Empty
+   Private m_sCurrSawingTilted As String = String.Empty
    Private m_sCurrDrilling As String = String.Empty
    Private m_sCurrMilling As String = String.Empty
    Private m_sCurrPocketing As String = String.Empty
@@ -731,6 +733,18 @@ Friend Property sCurrMillNoTip As String
       End Set
    End Property
 
+   Friend Property sCurrSawingTilted As String
+      Get
+         Return m_sCurrSawingTilted
+      End Get
+      Set(value As String)
+         If WritePrivateProfileString(S_MACH_MACH, K_CURRSAWINGTILTED, value, sMachIniFile) Then
+            m_sCurrSawingTilted = value
+            'm_MainWindow.m_CurrentProjectPageUC.MachiningTxBx.Text = value
+         End If
+      End Set
+   End Property
+
    Friend Property sCurrDrilling As String
       Get
          Return m_sCurrDrilling
@@ -1270,6 +1284,13 @@ Friend Property sCurrMillNoTip As String
       ' Leggo utensili correnti
       ' lama
       GetPrivateProfileString(S_MACH_MACH, K_CURRSAW, Nothing, m_sCurrSaw, sMachIniFile)
+      ' lama inclinata
+      If m_nShowToolChanger = 4 Then
+         GetPrivateProfileString(S_MACH_MACH, K_CURRSAWTILTED, Nothing, m_sCurrSawTilted, sMachIniFile)
+      Else
+         ' se non è configurato il cambio utensile e allora imposto l'unica lama disponibile per i tagli inclinati
+         m_sCurrSawTilted = m_sCurrSaw
+      End If
       ' foretto
       GetPrivateProfileString(S_MACH_MACH, K_CURRDRILL, Nothing, m_sCurrDrill, sMachIniFile)
       ' fresa
@@ -1286,6 +1307,8 @@ Friend Property sCurrMillNoTip As String
       ' Leggo lavorazioni correnti
       ' lama
       m_sCurrSawing = EstCalc.GetCurrSawing()
+      ' lama inlicnata
+      m_sCurrSawingTilted = EstCalc.GetCurrSawingTilted()
       ' foretto
       m_sCurrDrilling = EstCalc.GetCurrDrilling()
       ' fresa

EgtStoneLib/EstCalc.vb

@@ -258,6 +258,14 @@ Module EstCalc
       Return sCurrSawing
    End Function
 
+   Friend Function GetCurrSawingTilted() As String
+      Dim nOperId As Integer = EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Opers")
+      If nOperId = GDB_ID.NULL Then Return ""
+      Dim sCurrSawing As String = String.Empty
+      EgtGetInfo(nOperId, INFO_CURRSAWING, sCurrSawing)
+      Return sCurrSawing
+   End Function
+
    Friend Function SetCurrMilling(sCurrMilling As String) As Boolean
       Dim nOperId As Integer = EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Opers")
       If nOperId = GDB_ID.NULL Then Return False
@@ -726,49 +734,65 @@ Module EstCalc
          nLayId = EgtGetNextName(nLayId, NAME_INLOOP)
       End While
       ' Aggiorno le entità con tallone e quelle con angolo esterno
-      Const AGG_DEPTH As Double = 2.0
+      Const AGG_DEPTH As Double = 0.75
+      Dim bSizeOnTop As Boolean = (GetMainPrivateProfileInt(S_SIDES, K_SIZEALWAYSONTOP, 0) <> 0)
       For Each nEnt As Integer In vEnt
          ' Se aggiornamento vietato, vado oltre
-         If EgtExistsInfo( nEnt, INFO_SIDE_FIXED) Then continue for
+         If EgtExistsInfo(nEnt, INFO_SIDE_FIXED) Then Continue For
          ' Recupero eventuali tallone ed angolo originale
          Dim dHeel As Double = 0
          Dim dSideAng As Double = 0
          EgtGetInfo(nEnt, INFO_HEEL, dHeel)
          EgtGetInfo(nEnt, INFO_ORIG_SIDE_ANGLE, dSideAng)
+         ' Se inclinazione con tallone
          If Math.Abs(dSideAng) > EPS_ANG_SMALL And dHeel > 10 * EPS_SMALL Then
-            ' Angolo esterno
+            ' Inclinazione esterna
             If dSideAng > 0 Then
                ' Se tallone inferiore a spessore
                If dHeel < dTh - 10 * EPS_SMALL Then
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE, 0.0)
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE2, dSideAng)
-                  EgtSetInfo(nEnt, INFO_OFFSET2, -(dTh - dHeel) * Math.Tan(dSideAng * Math.PI / 180))
+                  If Not bSizeOnTop Then
+                     EgtSetInfo(nEnt, INFO_OFFSET, 0)
+                     EgtSetInfo(nEnt, INFO_OFFSET2, -(dTh - dHeel) * Math.Tan(dSideAng * Math.PI / 180))
+                  Else
+                     EgtSetInfo(nEnt, INFO_OFFSET, (dTh - dHeel) * Math.Tan(dSideAng * Math.PI / 180))
+                     EgtSetInfo(nEnt, INFO_OFFSET2, 0)
+                  End If
                   EgtSetInfo(nEnt, INFO_DEPTH2, (dTh - dHeel) + AGG_DEPTH)
-               ' altrimenti, tallone superiore a spessore -> non c'è taglio inclinato
+                  EgtSetInfo(nEnt, INFO_AGG2, AGG_DEPTH)
+                  ' altrimenti, tallone superiore a spessore -> non c'è taglio inclinato
                Else
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE, 0.0)
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE2, 0.0)
                   EgtRemoveInfo(nEnt, INFO_OFFSET2)
                   EgtRemoveInfo(nEnt, INFO_DEPTH2)
+                  EgtRemoveInfo(nEnt, INFO_AGG2)
                End If
-            ' Angolo interno
+               ' Inclinazione interna
             Else
                ' Se tallone inferiore a spessore
                If dHeel < dTh - 10 * EPS_SMALL Then
                   EgtSetInfo(nEnt, INFO_OFFSET, dHeel * Math.Tan(-dSideAng * Math.PI / 180))
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE2, 0.0)
                   EgtSetInfo(nEnt, INFO_DEPTH2, dHeel + AGG_DEPTH)
-               ' altrimenti, tallone superiore a spessore -> non c'è taglio inclinato
+                  EgtSetInfo(nEnt, INFO_AGG2, AGG_DEPTH)
+                  ' altrimenti, tallone superiore a spessore -> non c'è taglio inclinato
                Else
                   EgtSetInfo(nEnt, INFO_SIDE_ANGLE, 0.0)
                   EgtRemoveInfo(nEnt, INFO_OFFSET)
                   EgtRemoveInfo(nEnt, INFO_SIDE_ANGLE2)
                   EgtRemoveInfo(nEnt, INFO_DEPTH2)
+                  EgtRemoveInfo(nEnt, INFO_AGG2)
                End If
             End If
-         ' Se altrimenti inclinazione esterna
+            ' Se altrimenti inclinazione esterna
          ElseIf dSideAng > EPS_ANG_SMALL Then
-            EgtSetInfo(nEnt, INFO_OFFSET, -dTh * Math.Tan(dSideAng * Math.PI / 180))
+            If Not bSizeOnTop Then
+               EgtSetInfo(nEnt, INFO_OFFSET, -dTh * Math.Tan(dSideAng * Math.PI / 180))
+            Else
+               EgtSetInfo(nEnt, INFO_OFFSET, 0)
+            End If
          End If
       Next
       Return True
@@ -990,8 +1014,22 @@ Module EstCalc
       Const STORE_DIST As Double = 200
       ' 40 il Font usato per indicare il numero di pezzi in parcheggio "# N"
       Const STORE_OFFS As Double = 20 + 40 + 20
-      Dim dStXmin As Double = b3Tab.Min().x - 0.5 * (STORE_LARGH - b3Tab.DimX())
-      Return EgtPackBox(nId, dStXmin, -INFINITO, dStXmin + STORE_LARGH, b3Tab.Min().y - STORE_DIST, STORE_OFFS, False)
+      Dim dStoreLarg As Double = GetPrivateProfileDouble("Store", "StoreLargh", STORE_LARGH, CurrentMachine.sMachIniFile)
+      Dim dStoreDist As Double = GetPrivateProfileDouble("Store", "StoreDist", STORE_DIST, CurrentMachine.sMachIniFile)
+      Dim dStoreOffs As Double = GetPrivateProfileDouble("Store", "StoreOffs", STORE_OFFS, CurrentMachine.sMachIniFile)
+      Dim dStXmin As Double = b3Tab.Min().x - 0.5 * (dStoreLarg - b3Tab.DimX())
+
+      ' Verifico che il pezzo ha una posizione salvata
+      Dim ptCenter As Point3d
+      If EgtGetInfo(nId, "PosInPark", ptCenter) Then
+         Dim ptCurrPos As Point3d
+         EgtCenterPoint(nId, GDB_ID.ROOT, ptCurrPos)
+         Dim vt As New Vector3d(ptCenter - ptCurrPos)
+         EgtMove(nId, vt, GDB_RT.GLOB)
+         Return True
+      End If
+
+      Return EgtPackBox(nId, dStXmin, -INFINITO, dStXmin + dStoreLarg, b3Tab.Min().y - dStoreDist, dStoreOffs, False)
    End Function
 
    Friend Function VerifyPartsNesting(bReducedCut As Boolean) As Boolean

EgtStoneLib/VeinMatchingWindow.xaml

@@ -1,7 +1,7 @@
 <Window x:Class="VeinMatchingWindow"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   Height="500" Width="500" ShowInTaskbar="False" Initialized="Window_Initialized" MinWidth="300" MinHeight="300">
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+        xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+        Height="500" Width="500" ShowInTaskbar="False" Initialized="Window_Initialized" MinWidth="300" MinHeight="300">
 
    <Grid Name="VeinMatchingGrid" Background="{StaticResource Omag_Gray}">
       <Grid.ColumnDefinitions>
@@ -11,21 +11,16 @@
 
       <StackPanel Orientation="Vertical">
          <ToggleButton Name="ShowTextBtn" Height="40" Width="80"
-                       Margin="0,5,0,0"
-                       Content="ShowText"/>
+                       Margin="0,5,0,0"/>
          <ToggleButton Name="EditBtn" Height="40" Width="80"
-                       Margin="0,5,0,0"
-                       Content="Edit"/>
+                       Margin="0,5,0,0"/>
          <ToggleButton Name="VerifyBtn" Height="40" Width="80"
-                       Margin="0,5,0,0"
-                       Content="Verify"/>
+                       Margin="0,5,0,0"/>
          <ToggleButton Name="MagneticBtn" Height="40" Width="80"
                        Visibility="Collapsed"
-                       Margin="0,5,0,0"
-                       Content="Magnetic"/>
+                       Margin="0,5,0,0"/>
          <Button Name="ExportBtn" Height="40" Width="80"
-                 Margin="0,5,0,0"
-                 Content="Export"/>
+                 Margin="0,5,0,0"/>
          <Button Name="AssemblyBtn" Height="40" Width="80"
                  Margin="0,5,0,0"
                  Content="3D"/>

EgtStoneLib/VeinMatchingWindow.xaml.vb

@@ -1,7 +1,6 @@
 Imports System.IO
 Imports System.Windows.Interop
 Imports System.Collections.ObjectModel
-Imports System.Runtime.InteropServices
 Imports EgtUILib
 Imports EgtWPFLib5
 Imports OmagOFFICE.VeinMatchingWindow
@@ -51,11 +50,11 @@ Public Class VeinMatchingWindow
       ' Per non farla visualizzare alla creazione
       Me.Left = 32000
       ' Assegno messaggi
-      ExportBtn.Content = EgtMsg(MSG_VEINMATCHING + 1)        ' Esporta
-      ShowTextBtn.Content = EgtMsg(MSG_VEINMATCHING + 2)      ' Mostra Info
-      EditBtn.Content = EgtMsg(MSG_VEINMATCHING + 3)          ' Modifica
-      VerifyBtn.Content = EgtMsg(MSG_VEINMATCHING + 4)        ' Verifica
-      MagneticBtn.Content = EgtMsg(MSG_VEINMATCHING + 5)      ' Magnetico
+      ExportBtn.Content = EgtMsg(91601)        ' Esporta
+      ShowTextBtn.Content = EgtMsg(91609)      ' Mostra Info
+      EditBtn.Content = EgtMsg(91610)          ' Modifica
+      VerifyBtn.Content = EgtMsg(91611)        ' Verifica
+      MagneticBtn.Content = EgtMsg(91612)      ' Magnetico
    End Sub
 
    Private Sub Window_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded

InstrumentPanel/PrintPanelVM.vb

@@ -78,7 +78,7 @@ Public Class PrintPanelVM
             tmpImg.Stretch = Stretch.Uniform
             tmpImg.EndInit()
             ' eseguo la stampa
-            printDlg.PrintVisual(tmpImg, "Parts Layout")
+            printDlg.PrintVisual(tmpImg, EgtMsg(91688))    ' Parts Layout
          Catch
             ' Rrror in executing print
             EgtOutLog(EgtMsg(50182))

MachOptionWindow/MachOptionWindowVM.vb

@@ -576,13 +576,13 @@ Public Class MachOptionWindowVM
 
    Public ReadOnly Property OkMsg As String
       Get
-         Return "Ok"
+         Return EgtMsg(91651) ' Ok
       End Get
    End Property
 
    Public ReadOnly Property CancelMsg As String
       Get
-         Return "Cancel"
+         Return EgtMsg(91652) ' Cancel
       End Get
    End Property
 

MachinePanel/MyMachinePanelVM.vb

@@ -105,7 +105,7 @@ Public Class MyMachinePanelVM
       ' procedo ad inizializzare la classe → carico la lista "MachineList" che visualizzo per l'inserimento di nuovi MachGroup
       Machine.MachineListInit(sMchRoots, MachineList)
       ' Inizializzo valori visibilità parametri Db utensili e lavorazioni
-      OmagOFFICETMDbParamVisibility.Init()
+      ' OmagOFFICETMDbParamVisibility.Init()
    End Sub
 
    ''' <summary>

MainWindow/MainWindowM.vb

@@ -228,8 +228,8 @@ Public Class MainWindowM
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace( sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2604, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2604, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2706, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2706, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.OFFICE_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -291,7 +291,7 @@ Public Class MainWindowM
       ' Leggo nome cartella delle foto
       GetMainPrivateProfileString(S_GENERAL, K_PHOTODIR, sDataRoot & "\Data", m_sPhotoDir)
       ' Creo connessione al Db
-      If m_SlabDB And Not ManageDb.ConnectToDb(m_sPhotoDir & "\" & DB_FILENAME) Then
+      If m_SlabDB AndAlso Not ManageDb.ConnectToDb(m_sPhotoDir & "\" & DB_FILENAME) Then
          EgtOutLog("Error connecting to DB")
          MessageBox.Show(EgtMsg(92000 + 1), EgtMsg(MSG_EGTMSGBOX + 15), MessageBoxButton.OK, MessageBoxImage.Error)
          m_SlabDB = False
@@ -299,6 +299,7 @@ Public Class MainWindowM
       ' Info su opzioni chiave
       EgtOutLog("KeyOptions : " & bKey.ToString() & " " & m_nKeyOptions.ToString() & " " & bProd.ToString())
       EgtPHOTOLib.MainData.SetConfigDir(m_sConfigDir)
+      EgtPHOTOLib.MainData.SetDebugLevel(m_nDebug)
       EgtPHOTOLib.MainData.SetKeyLevel(m_nKeyLevel)
       EgtPHOTOLib.MainData.SetKeyOptions(CInt(m_nKeyOptions))
       EgtPHOTOLib.MainData.SetPhotoDir(m_sPhotoDir)

My Project/AssemblyInfo.vb

@@ -30,7 +30,7 @@ Imports System.Windows
 #End If
 <Assembly: AssemblyCompany("Egalware s.r.l.")> 
 <Assembly: AssemblyProduct("OmagOFFICE")>
-<Assembly: AssemblyCopyright("Copyright ©  2017-2023 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2017-2025 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")> 
 <Assembly: ComVisible(false)>
 'In order to begin building localizable applications, set 
@@ -69,6 +69,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.6.4.1")>
-<Assembly: AssemblyFileVersion("2.6.4.1")>
+<Assembly: AssemblyVersion("2.7.6.1")>
+<Assembly: AssemblyFileVersion("2.7.6.1")>
 

MyMachGroupPanel/MyMachGroupPanelVM.vb

@@ -351,11 +351,11 @@ Public Class MyMachGroup
          If Not EgtGetInfo(Id, INFO_SLABHEIGHT, dSlabHeight) Then dSlabHeight = 0
          Dim sCurrSawing As String = String.Empty
          If Not EgtGetInfo(m_nOpersGroupId, INFO_CURRSAWING, sCurrSawing) Then sCurrSawing = "---"
-         Return "Name: " & sSlabName & Environment.NewLine &
-                "Material: " & sMaterial & Environment.NewLine &
-                "Thickness: " & LenToString(dSlabHeight, 3) & Environment.NewLine &
-                "Sawing: " & sCurrSawing & Environment.NewLine &
-                "Machine: " & Machine
+         Return EgtMsg(91683) & sSlabName & Environment.NewLine &                   ' Name: 
+                EgtMsg(91684) & sMaterial & Environment.NewLine &                   ' Material: 
+                EgtMsg(91685) & LenToString(dSlabHeight, 3) & Environment.NewLine & ' Thickness: 
+                EgtMsg(91686) & sCurrSawing & Environment.NewLine &                 ' Sawing: 
+                EgtMsg(91687) & Machine                                             ' Machine: 
       End Get
    End Property
 

MyMachiningDbWindow/MyMachiningDbWindowV.xaml

@@ -18,7 +18,7 @@
    </EgtWPFLib5:EgtCustomWindow.InputBindings>
 
    <EgtWPFLib5:EgtCustomWindow.Resources>
-      <EgtWPFLib5:MachiningParamVisibilityConverter x:Key="MachiningParamVisibilityConverter"/>
+      <!--<EgtWPFLib5:MachiningParamVisibilityConverter x:Key="MachiningParamVisibilityConverter"/>-->
       <EgtWPFLib5:DepthUnitConverter x:Key="DepthUnitConverter"/>
       <EgtWPFLib5:ErrorVisibilityConverter x:Key="ErrorVisibilityConverter"/>
       <sys:Int32 x:Key="Invert">0</sys:Int32>

MySceneHost/MySceneHostVM.vb

@@ -102,12 +102,14 @@ Public Class MySceneHostVM
 
    Public Overrides Sub InitSceneEvents()
       AddHandler MainScene.OnMouseDownScene, AddressOf OnMouseDownScene
+      'AddHandler OnMouseDownScene_DoubleClick_1, AddressOf OnMouseDownScene_DoubleClick
       AddHandler MainScene.OnMouseMoveScene, AddressOf OnMouseMoveScene
       AddHandler MainScene.OnMouseUpScene, AddressOf OnMouseUpScene
       AddHandler MainScene.KeyDown, AddressOf OnKeyDownScene
       AddHandler MainScene.OnCursorPos, AddressOf OnCursorPos
       AddHandler MainScene.OnShowDistance, AddressOf OnShowDistance
       AddHandler MainScene.OnChangedSnapPointType, AddressOf OnChangedSnapPointType
+
    End Sub
 
    Private Sub PreInitializeScene()
@@ -809,6 +811,13 @@ Public Class MySceneHostVM
    Private Sub OnMouseDownScene(sender As Object, e As Windows.Forms.MouseEventArgs)
       ' Si può selezionare solo con il tasto sinistro e se stato NULL
       If e.Button <> Windows.Forms.MouseButtons.Left Or Not MainScene.IsStatusNull() Then Return
+      If e.Clicks > 1 Then
+         Select Case OmagOFFICEMap.refOptionPanelVM.SelItem
+            Case OptionPanelVM.Tabs.MACHINING
+               OmagOFFICEMap.refMachiningTabVM.OnMouseDownScene_DoubleClick(sender, e)
+            Case OptionPanelVM.Tabs.SIMUL
+         End Select
+      End If
       ' Chiamo l'opportuno gestore
       Select Case OmagOFFICEMap.refOptionPanelVM.SelItem
          Case OptionPanelVM.Tabs.RAWPART

MyToolDbWindow/MyToolDbWindowV.xaml

@@ -1,165 +1,165 @@
 <EgtWPFLib5:EgtCustomWindow x:Class="MyToolDbWindowV"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:sys="clr-namespace:System;assembly=mscorlib"
-   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
-   Title="{Binding Title}"
-   Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
-   WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="False"
-   IsMinimizable="False" WindowStartupLocation="CenterOwner" ShowInTaskbar="False"
-   CloseCommand="{Binding CloseToolsDbCommand,Mode=OneWay,UpdateSourceTrigger=PropertyChanged}"
-   CloseCommandParameter="{Binding Path=SelectedItem, ElementName=ToolsTreeView}"
-   Height="900">
-    <EgtWPFLib5:EgtCustomWindow.InputBindings>
-        <KeyBinding Key="Escape" Command="{Binding ReloadToolCommand}"
+                            xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+                            xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+                            xmlns:sys="clr-namespace:System;assembly=mscorlib"
+                            xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+                            Title="{Binding Title}"
+                            Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
+                            WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="False"
+                            IsMinimizable="False" WindowStartupLocation="CenterOwner" ShowInTaskbar="False"
+                            CloseCommand="{Binding CloseToolsDbCommand,Mode=OneWay,UpdateSourceTrigger=PropertyChanged}"
+                            CloseCommandParameter="{Binding Path=SelectedItem, ElementName=ToolsTreeView}"
+                            Height="900">
+   <EgtWPFLib5:EgtCustomWindow.InputBindings>
+      <KeyBinding Key="Escape" Command="{Binding ReloadToolCommand}"
          CommandParameter="{Binding Path=SelectedItem,ElementName=ToolsTreeView}"/>
-    </EgtWPFLib5:EgtCustomWindow.InputBindings>
+   </EgtWPFLib5:EgtCustomWindow.InputBindings>
 
-    <EgtWPFLib5:EgtCustomWindow.Resources>
-        <EgtWPFLib5:ToolParamVisibilityConverter x:Key="ToolParamVisibilityConverter"/>
-        <EgtWPFLib5:ToolDrawUUIDConverter x:Key="ToolDrawUUIDConverter"/>
-        <EgtWPFLib5:ErrorVisibilityConverter x:Key="ErrorVisibilityConverter"/>
-        <sys:Int32 x:Key="Corr">0</sys:Int32>
-        <sys:Int32 x:Key="ExitPar">1</sys:Int32>
-        <sys:Int32 x:Key="Coolant">2</sys:Int32>
-        <sys:Int32 x:Key="CornRad">3</sys:Int32>
-        <sys:Int32 x:Key="Diam">4</sys:Int32>
-        <sys:Int32 x:Key="TotDiam">5</sys:Int32>
-        <sys:Int32 x:Key="Feed">6</sys:Int32>
-        <sys:Int32 x:Key="EndFeed">7</sys:Int32>
-        <sys:Int32 x:Key="StartFeed">8</sys:Int32>
-        <sys:Int32 x:Key="TipFeed">9</sys:Int32>
-        <sys:Int32 x:Key="Len">10</sys:Int32>
-        <sys:Int32 x:Key="TotLen">11</sys:Int32>
-        <sys:Int32 x:Key="MaxMat">12</sys:Int32>
-        <sys:Int32 x:Key="LonOffset">13</sys:Int32>
-        <sys:Int32 x:Key="RadOffset">14</sys:Int32>
-        <sys:Int32 x:Key="Speed">15</sys:Int32>
-        <sys:Int32 x:Key="SideAng">16</sys:Int32>
-        <sys:Int32 x:Key="MaxSpeed">17</sys:Int32>
-        <sys:Int32 x:Key="Thick">18</sys:Int32>
-        <sys:Int32 x:Key="MaxAbsorption">19</sys:Int32>
-        <sys:Int32 x:Key="MinFeed">20</sys:Int32>
-        <sys:Int32 x:Key="Draw">21</sys:Int32>
-        <sys:Int32 x:Key="Head">22</sys:Int32>
-        <sys:Int32 x:Key="NamePar">23</sys:Int32>
-        <sys:Int32 x:Key="UserNotes">24</sys:Int32>
-        <sys:Int32 x:Key="TcPos">25</sys:Int32>
-    </EgtWPFLib5:EgtCustomWindow.Resources>
+   <EgtWPFLib5:EgtCustomWindow.Resources>
+      <!--<EgtWPFLib5:ToolParamVisibilityConverter x:Key="ToolParamVisibilityConverter"/>-->
+      <EgtWPFLib5:ToolDrawUUIDConverter x:Key="ToolDrawUUIDConverter"/>
+      <EgtWPFLib5:ErrorVisibilityConverter x:Key="ErrorVisibilityConverter"/>
+      <sys:Int32 x:Key="Corr">0</sys:Int32>
+      <sys:Int32 x:Key="ExitPar">1</sys:Int32>
+      <sys:Int32 x:Key="Coolant">2</sys:Int32>
+      <sys:Int32 x:Key="CornRad">3</sys:Int32>
+      <sys:Int32 x:Key="Diam">4</sys:Int32>
+      <sys:Int32 x:Key="TotDiam">5</sys:Int32>
+      <sys:Int32 x:Key="Feed">6</sys:Int32>
+      <sys:Int32 x:Key="EndFeed">7</sys:Int32>
+      <sys:Int32 x:Key="StartFeed">8</sys:Int32>
+      <sys:Int32 x:Key="TipFeed">9</sys:Int32>
+      <sys:Int32 x:Key="Len">10</sys:Int32>
+      <sys:Int32 x:Key="TotLen">11</sys:Int32>
+      <sys:Int32 x:Key="MaxMat">12</sys:Int32>
+      <sys:Int32 x:Key="LonOffset">13</sys:Int32>
+      <sys:Int32 x:Key="RadOffset">14</sys:Int32>
+      <sys:Int32 x:Key="Speed">15</sys:Int32>
+      <sys:Int32 x:Key="SideAng">16</sys:Int32>
+      <sys:Int32 x:Key="MaxSpeed">17</sys:Int32>
+      <sys:Int32 x:Key="Thick">18</sys:Int32>
+      <sys:Int32 x:Key="MaxAbsorption">19</sys:Int32>
+      <sys:Int32 x:Key="MinFeed">20</sys:Int32>
+      <sys:Int32 x:Key="Draw">21</sys:Int32>
+      <sys:Int32 x:Key="Head">22</sys:Int32>
+      <sys:Int32 x:Key="NamePar">23</sys:Int32>
+      <sys:Int32 x:Key="UserNotes">24</sys:Int32>
+      <sys:Int32 x:Key="TcPos">25</sys:Int32>
+   </EgtWPFLib5:EgtCustomWindow.Resources>
 
-    <Grid Background="Transparent">
-        <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="0.95*"/>
-            <ColumnDefinition Width="2*"/>
-            <ColumnDefinition Width="1*"/>
-        </Grid.ColumnDefinitions>
+   <Grid Background="Transparent">
+      <Grid.ColumnDefinitions>
+         <ColumnDefinition Width="0.95*"/>
+         <ColumnDefinition Width="2*"/>
+         <ColumnDefinition Width="1*"/>
+      </Grid.ColumnDefinitions>
 
-        <Grid Background="Transparent">
-            <Grid.RowDefinitions>
-                <RowDefinition Height="0.75*"/>
-                <RowDefinition Height="12*"/>
-            </Grid.RowDefinitions>
+      <Grid Background="Transparent">
+         <Grid.RowDefinitions>
+            <RowDefinition Height="0.75*"/>
+            <RowDefinition Height="12*"/>
+         </Grid.RowDefinitions>
 
-            <UniformGrid Grid.Row="0" Columns="8">
-                <Button ToolTip="New" Command="{Binding NewCommand}"
-                CommandParameter="{Binding Path=SelectedItem, ElementName=ToolsTreeView}"
-                IsEnabled="{Binding IsEnabledNewBtn, Mode=OneWay}"
-                Style = "{DynamicResource MachiningDB_Button}">
-                    <Image Source="/Resources/TopCommandBar/New.png" Stretch="Uniform"/>
-                </Button>
-                <Button ToolTip="Save" Command="{Binding SaveCommand}"
-                CommandParameter="{Binding Path=SelectedItem, ElementName=ToolsTreeView}"
-                IsEnabled="{Binding IsEnabledSaveBtn, Mode=OneWay}"
-                Style = "{DynamicResource MachiningDB_Button}">
-                    <Image Source="/Resources/TopCommandBar/Save.png" Stretch="Uniform"/>
-                </Button>
-                <Button ToolTip="Remove" Command="{Binding RemoveCommand}"
-                CommandParameter="{Binding Path=SelectedItem, ElementName=ToolsTreeView}"
-                IsEnabled="{Binding IsEnabledRemoveBtn, Mode=OneWay}"
-                Style = "{DynamicResource MachiningDB_Button}">
-                    <Image Source="/Resources/TopCommandBar/Remove.png" Stretch="Uniform"/>
-                </Button>
+         <UniformGrid Grid.Row="0" Columns="8">
+            <Button ToolTip="New" Command="{Binding NewCommand}"
+                    CommandParameter="{Binding Path=SelectedItem, ElementName=ToolsTreeView}"
+                    IsEnabled="{Binding IsEnabledNewBtn, Mode=OneWay}"
+                    Style = "{DynamicResource MachiningDB_Button}">
+               <Image Source="/Resources/TopCommandBar/New.png" Stretch="Uniform"/>
+            </Button>
+            <Button ToolTip="Save" Command="{Binding SaveCommand}"
+                    CommandParameter="{Binding Path=SelectedItem, ElementName=ToolsTreeView}"
+                    IsEnabled="{Binding IsEnabledSaveBtn, Mode=OneWay}"
+                    Style = "{DynamicResource MachiningDB_Button}">
+               <Image Source="/Resources/TopCommandBar/Save.png" Stretch="Uniform"/>
+            </Button>
+            <Button ToolTip="Remove" Command="{Binding RemoveCommand}"
+                    CommandParameter="{Binding Path=SelectedItem, ElementName=ToolsTreeView}"
+                    IsEnabled="{Binding IsEnabledRemoveBtn, Mode=OneWay}"
+                    Style = "{DynamicResource MachiningDB_Button}">
+               <Image Source="/Resources/TopCommandBar/Remove.png" Stretch="Uniform"/>
+            </Button>
 
-                <Button ToolTip="Import" Command="{Binding ImportCommand}"
-                CommandParameter="{Binding Path=SelectedItem, ElementName=MachiningsTreeView}"
-                IsEnabled="{Binding IsEnabledNewBtn, Mode=OneWay}"
-                Style = "{DynamicResource MachiningDB_Button}">
-                    <Image Source="/Resources/TopCommandBar/Import.png" Stretch="Uniform"/>
-                </Button>
-                <Button ToolTip="Export" Command="{Binding ExportCommand}"
-                CommandParameter="{Binding Path=SelectedItem, ElementName=MachiningsTreeView}"
-                IsEnabled="{Binding IsEnabledSaveBtn, Mode=OneWay}"
-                Style = "{DynamicResource MachiningDB_Button}">
-                    <Image Source="/Resources/TopCommandBar/Export_1.png" Stretch="Uniform"/>
-                </Button>
-                <Button ToolTip="Reset" Command="{Binding ReloadToolCommand}"
-                CommandParameter="{Binding Path=SelectedItem, ElementName=MachiningsTreeView}"
-                IsEnabled="{Binding IsEnabledRemoveBtn, Mode=OneWay}"
-                Style = "{DynamicResource MachiningDB_Button}">
-                    <Image Source="/Resources/TopCommandBar/Reset.png" Stretch="Uniform"/>
-                </Button>
-            </UniformGrid>
+            <Button ToolTip="Import" Command="{Binding ImportCommand}"
+                    CommandParameter="{Binding Path=SelectedItem, ElementName=MachiningsTreeView}"
+                    IsEnabled="{Binding IsEnabledNewBtn, Mode=OneWay}"
+                    Style = "{DynamicResource MachiningDB_Button}">
+               <Image Source="/Resources/TopCommandBar/Import.png" Stretch="Uniform"/>
+            </Button>
+            <Button ToolTip="Export" Command="{Binding ExportCommand}"
+                    CommandParameter="{Binding Path=SelectedItem, ElementName=MachiningsTreeView}"
+                    IsEnabled="{Binding IsEnabledSaveBtn, Mode=OneWay}"
+                    Style = "{DynamicResource MachiningDB_Button}">
+               <Image Source="/Resources/TopCommandBar/Export_1.png" Stretch="Uniform"/>
+            </Button>
+            <Button ToolTip="Reset" Command="{Binding ReloadToolCommand}"
+                    CommandParameter="{Binding Path=SelectedItem, ElementName=MachiningsTreeView}"
+                    IsEnabled="{Binding IsEnabledRemoveBtn, Mode=OneWay}"
+                    Style = "{DynamicResource MachiningDB_Button}">
+               <Image Source="/Resources/TopCommandBar/Reset.png" Stretch="Uniform"/>
+            </Button>
+         </UniformGrid>
 
-            <!--Elenco degli utensili-->
-            <TreeView Name="ToolsTreeView" Grid.Row="1"
-                      Background="Transparent" BorderThickness="0"
-                      ItemsSource="{Binding ToolsList}">
-                <TreeView.ItemContainerStyle>
+         <!--Elenco degli utensili-->
+         <TreeView Name="ToolsTreeView" Grid.Row="1"
+                   Background="Transparent" BorderThickness="0"
+                   ItemsSource="{Binding ToolsList}">
+            <TreeView.ItemContainerStyle>
                <Style TargetType="{x:Type TreeViewItem}" BasedOn="{StaticResource Db_TreeViewItem}">
-                        <Setter Property="FontSize" Value="10" />
-                        <Setter Property="Foreground" Value="{StaticResource Omag_White}" />
-                        <Setter Property="IsSelected" Value="{Binding IsSelected, Mode=TwoWay}" />
-                        <Setter Property="IsExpanded" Value="{Binding IsExpanded, Mode=TwoWay}" />
-                        <Setter Property="IsEnabled" Value="{Binding IsEnabled, Mode=TwoWay}" />
-                    </Style>
-                </TreeView.ItemContainerStyle>
+                  <Setter Property="FontSize" Value="10" />
+                  <Setter Property="Foreground" Value="{StaticResource Omag_White}" />
+                  <Setter Property="IsSelected" Value="{Binding IsSelected, Mode=TwoWay}" />
+                  <Setter Property="IsExpanded" Value="{Binding IsExpanded, Mode=TwoWay}" />
+                  <Setter Property="IsEnabled" Value="{Binding IsEnabled, Mode=TwoWay}" />
+               </Style>
+            </TreeView.ItemContainerStyle>
 
-                <TreeView.Resources>
-                    <HierarchicalDataTemplate DataType="{x:Type EgtWPFLib5:FamilyToolTreeViewItem}" ItemsSource="{Binding Items}">
+            <TreeView.Resources>
+               <HierarchicalDataTemplate DataType="{x:Type EgtWPFLib5:FamilyToolTreeViewItem}" ItemsSource="{Binding Items}">
 
-                        <Grid  Background="Transparent">
-                            <Grid.ColumnDefinitions>
-                                <ColumnDefinition Width="Auto"/>
-                                <ColumnDefinition Width="1*"/>
-                                <ColumnDefinition Width="Auto"/>
-                            </Grid.ColumnDefinitions>
+                  <Grid  Background="Transparent">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="Auto"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="Auto"/>
+                     </Grid.ColumnDefinitions>
 
-                            <Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Width="32" Margin="0" />
-                            <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="5,0,10,0" VerticalAlignment="Center" HorizontalAlignment="left" />
-                            <Ellipse Grid.Column="2" Height="10" Width="10" Fill="{Binding FamilyColor}" />
+                     <Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Width="32" Margin="0" />
+                     <TextBlock Grid.Column="1" Text="{Binding Name}" FontSize="15" Margin="5,0,10,0" VerticalAlignment="Center" HorizontalAlignment="left" />
+                     <Ellipse Grid.Column="2" Height="10" Width="10" Fill="{Binding FamilyColor}" />
 
-                        </Grid>
+                  </Grid>
 
-                    </HierarchicalDataTemplate>
+               </HierarchicalDataTemplate>
 
-                    <DataTemplate DataType="{x:Type EgtWPFLib5:ToolTreeViewItem}">
-                        <Grid  Background="Transparent">
-                            <Grid.ColumnDefinitions>
-                                <ColumnDefinition Width="Auto"/>
-                                <ColumnDefinition Width="1*"/>
-                                <ColumnDefinition Width="Auto"/>
-                            </Grid.ColumnDefinitions>
+               <DataTemplate DataType="{x:Type EgtWPFLib5:ToolTreeViewItem}">
+                  <Grid  Background="Transparent">
+                     <Grid.ColumnDefinitions>
+                        <ColumnDefinition Width="Auto"/>
+                        <ColumnDefinition Width="1*"/>
+                        <ColumnDefinition Width="Auto"/>
+                     </Grid.ColumnDefinitions>
 
-                            <!--<Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Margin="0,8,6,4" />-->
-                            <TextBlock Grid.Column="1" Text="{Binding NamePar}" Height="21" FontSize="13"  Margin="30,0,10,0"
-                                       VerticalAlignment="Center" HorizontalAlignment="left"/>
-                            <Ellipse Grid.Column="2" Height="10" Width="10" Fill="{Binding ToolColor}" />
+                     <!--<Image Grid.Column="0" Source="{Binding PictureString}" Height="32" Margin="0,8,6,4" />-->
+                     <TextBlock Grid.Column="1" Text="{Binding NamePar}" Height="21" FontSize="13"  Margin="30,0,10,0"
+                                VerticalAlignment="Center" HorizontalAlignment="left"/>
+                     <Ellipse Grid.Column="2" Height="10" Width="10" Fill="{Binding ToolColor}" />
 
-                        </Grid>
+                  </Grid>
 
-                    </DataTemplate>
+               </DataTemplate>
 
-                </TreeView.Resources>
+            </TreeView.Resources>
 
-            </TreeView>
+         </TreeView>
 
-        </Grid>
+      </Grid>
 
-        <ContentControl Content="{Binding Path=ParamPageV}" Grid.Column="1"/>
+      <ContentControl Content="{Binding Path=ParamPageV}" Grid.Column="1"/>
 
-        <!--ContentControl che ospita la scena restituita sotto forma di WindowsFormsHost-->
-        <ContentControl Content="{Binding ToolSceneHost}" Grid.Column="2"/>
+      <!--ContentControl che ospita la scena restituita sotto forma di WindowsFormsHost-->
+      <ContentControl Content="{Binding ToolSceneHost}" Grid.Column="2"/>
 
-    </Grid>
+   </Grid>
 
 </EgtWPFLib5:EgtCustomWindow>

MyWaterjetDbWindow/MyWaterjetDbWindowV.xaml

@@ -116,6 +116,15 @@
                      </DataTemplate>
                   </DataGridTextColumn.HeaderTemplate>
                </DataGridTextColumn>
+               <!--Flux-->
+               <DataGridTextColumn Binding="{Binding Flux}"
+                            Width="*">
+                  <DataGridTextColumn.HeaderTemplate>
+                     <DataTemplate>
+                        <TextBlock Text="{Binding DataContext.Flux_Msg,RelativeSource={RelativeSource AncestorType={x:Type DataGrid}}}"/>
+                     </DataTemplate>
+                  </DataGridTextColumn.HeaderTemplate>
+               </DataGridTextColumn>  
                <!--Q1-->
                <DataGridTextColumn Binding="{Binding Q1}"
                             Width="*">

OmagOFFICE.vbproj

@@ -135,11 +135,13 @@
       <SpecificVersion>False</SpecificVersion>
       <HintPath>..\..\EgtProg\Dll32\EgtPHOTOLib.dll</HintPath>
     </Reference>
-    <Reference Include="EgtUILib">
-      <HintPath>..\..\EgtProg\DllD32\EgtUILib.dll</HintPath>
+    <Reference Include="EgtUILib, Version=2.7.5.2, Culture=neutral, processorArchitecture=MSIL">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\EgtProg\OmagOFFICE\EgtUILib.dll</HintPath>
     </Reference>
-    <Reference Include="EgtWPFLib5">
-      <HintPath>..\..\EgtProg\DllD32\EgtWPFLib5.dll</HintPath>
+    <Reference Include="EgtWPFLib5, Version=2.7.4.1, Culture=neutral, processorArchitecture=MSIL">
+      <SpecificVersion>False</SpecificVersion>
+      <HintPath>..\..\EgtProg\OmagOFFICE\EgtWPFLib5.dll</HintPath>
     </Reference>
     <Reference Include="PresentationFramework.Aero" />
     <Reference Include="System.Core" />
@@ -963,6 +965,23 @@
   <ItemGroup>
     <Resource Include="Resources\NewIcons\DB-WJ.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\DetailPage\Cancel.png" />
+    <Resource Include="Resources\DetailPage\Confirm.png" />
+    <Resource Include="Resources\DetailPage\Elimina.png" />
+    <Resource Include="Resources\DetailPage\Pencil.png" />
+    <Resource Include="Resources\DetailPage\Photo.png" />
+    <Resource Include="Resources\DetailPage\Polygon.png" />
+    <Resource Include="Resources\DetailPage\Print.png" />
+    <Resource Include="Resources\DetailPage\Reset.png" />
+    <Resource Include="Resources\DetailPage\Rubber.png" />
+    <Resource Include="Resources\DetailPage\Save.png" />
+    <Resource Include="Resources\DetailPage\ZoomAll.png" />
+  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\NewIcons\LightArrowOff.png" />
+    <Resource Include="Resources\NewIcons\LightArrowOn.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagOFFICE\OmagOFFICER32.exe

OptionPanel/MachiningTab/MachiningTabVM.vb

@@ -334,6 +334,12 @@ Public Class MachiningTabVM
       End If
    End Sub
 
+   Friend Sub OnMouseDownScene_DoubleClick(sender As Object, e As Windows.Forms.MouseEventArgs)
+      If m_MachiningMode = MachiningModeOpt.SPLIT Then
+         OmagOFFICEMap.refSplitModeVM.OnMouseDownScene_DoubleClick(sender, e)
+      End If
+   End Sub
+
 #End Region    ' EVENTS
 
 End Class

OptionPanel/MachiningTab/MoveRawModeVM.vb

@@ -749,7 +749,7 @@ Public Class MoveRawModeVM
                If VerifyCollisionWithOtherRawPart(nId) Then
                   ' mantengo la selezione del pezzo
                   EgtSetStatus(nId, GDB_ST.SEL)
-                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(91231), 3, MSG_TYPE.ERROR_)      ' Collisione pezzi
                Else
                   ' Se con ventose, le nascondo
                   If Not OmagOFFICEMap.refMachiningTabVM.ByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
@@ -761,7 +761,7 @@ Public Class MoveRawModeVM
                If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
                   ' mantengo la selezione del pezzo
                   EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
-                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(91231), 3, MSG_TYPE.ERROR_)     ' Collisione pezzi
                   EgtDraw()
                   ' esco dal ciclo, prima devo depositare correttamente il pezzo
                   Exit While
@@ -819,7 +819,7 @@ Public Class MoveRawModeVM
       If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
          ' mantengo la selezione del pezzo
          EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
-         OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+         OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(91231), 3, MSG_TYPE.ERROR_)    ' Collisione pezzi
          EgtDraw()
       End If
 

OptionPanel/MachiningTab/SplitModeV.xaml

@@ -21,8 +21,12 @@
                             <Image Margin="1" Height="20" Width="20"
                                    Source="{Binding SourceImg}">
                             </Image>
-                            <TextBlock Margin="1" Text="{Binding Name}">
-                            </TextBlock>
+                            <TextBlock Margin="1" Text="{Binding Name}"/>
+                            <StackPanel.InputBindings>
+                                <MouseBinding MouseAction="LeftDoubleClick" 
+                                   Command="{Binding Path=DataContext.OnOffCommand,
+                                                     RelativeSource={RelativeSource AncestorType=UserControl, Mode=FindAncestor }}"/>
+                            </StackPanel.InputBindings>
                         </StackPanel>
                     </DataTemplate>
                 </ListBox.ItemTemplate>
@@ -40,6 +44,7 @@
                             </DataTrigger>
                         </Style.Triggers>
                         <Setter Property="IsSelected" Value="{Binding IsSelected, Mode=TwoWay}" />
+                        <Setter Property="HorizontalContentAlignment" Value="Stretch"/>
                     </Style>
                 </ListBox.ItemContainerStyle>
             </ListBox>
@@ -47,21 +52,27 @@
 
         <StackPanel HorizontalAlignment="Center" Orientation="Horizontal" Margin="0,0,0,2.5">
 
-            <Button Grid.Column="1"
+            <Button
                  IsEnabled="{Binding bEnabledCommandMove}"
                  Style="{StaticResource OptionPanel_Button}"
                  Command="{Binding MoveUpCommand}"
                     Margin="0,0,0.5,0">
                 <Image Source="/Resources/NestingTab/UpArrow.png"/>
             </Button>
-            <Button Grid.Column="2"
+            <Button
                  IsEnabled="{Binding bEnabledCommandMove}"
                  Style="{StaticResource OptionPanel_Button}"
                  Command="{Binding MoveDownCommand}"
                     Margin="0.5,0,0,0">
                 <Image Source="/Resources/NestingTab/DownArrow.png"/>
             </Button>
-
+            <ToggleButton ToolTip="{Binding LayNbArrTgBtnMsg}"
+                  Style="{StaticResource Split_ToggleButton_Img}"
+                  IsChecked="{Binding LayNbArrTgBtn_IsChecked}"
+                  Height="20" Width="20"
+                      Margin="10,0,1,0">
+                <Image Source="{Binding LayNbArrTgBtnImg}"/>
+            </ToggleButton>
         </StackPanel>
 
         <Border Style="{StaticResource Border}" Margin="0,1,0,5">
@@ -504,7 +515,7 @@
                             Style="{StaticResource ImgButton}"/>
                                 </StackPanel>
                             </Button>
-                            
+
                         </StackPanel>
 
                     </UniformGrid>
@@ -552,7 +563,7 @@
                             </Button>
                         </StackPanel>
 
-                        
+
                         <StackPanel Margin="1,0,0,0">
                             <Button ToolTip="{Binding ModifEndMsg}"
                        Style="{StaticResource Split_Button_Img}"

OptionPanel/MachiningTab/SplitModeVM.vb

@@ -355,6 +355,33 @@ Public Class SplitModeVM
       End Set
    End Property
 
+   Private m_LayNbArrTgBtn_IsChecked As Boolean = False
+   Public Property LayNbArrTgBtn_IsChecked As Boolean
+      Get
+         Return m_LayNbArrTgBtn_IsChecked
+      End Get
+      Set(value As Boolean)
+         ' imposto il valore della bottone, dell'icona e del messaggio
+         SetLayNbArrTgBtn_IsChecked(value)
+         WriteMainPrivateProfileString(S_GENERAL, K_SHOWNBARROW, If(m_LayNbArrTgBtn_IsChecked, "1", "0"))
+      End Set
+   End Property
+
+   Private Sub SetLayNbArrTgBtn_IsChecked(value As Boolean)
+      m_LayNbArrTgBtn_IsChecked = value
+      If value Then
+         StatusOffNumbArrow(GDB_ST.ON_)
+         m_LayNbArrTgBtnMsg = EgtMsg(91218)     ' Hide
+         m_LayNbArrTgBtnImg = "/Resources/NewIcons/LightArrowOn.png"
+      Else
+         StatusOffNumbArrow(GDB_ST.OFF)
+         m_LayNbArrTgBtnMsg = EgtMsg(91219)     ' Show
+         m_LayNbArrTgBtnImg = "/Resources/NewIcons/LightArrowOff.png"
+      End If
+      NotifyPropertyChanged(NameOf(LayNbArrTgBtnMsg))
+      NotifyPropertyChanged(NameOf(LayNbArrTgBtnImg))
+   End Sub
+
 #Region "SPLIT CUT"
 
    Private m_CreateCut_IsChecked As Boolean
@@ -583,6 +610,20 @@ Public Class SplitModeVM
       End Get
    End Property
 
+   Private Property m_LayNbArrTgBtnMsg As String = "Show"
+   Public ReadOnly Property LayNbArrTgBtnMsg As String
+      Get
+         Return m_LayNbArrTgBtnMsg
+      End Get
+   End Property
+
+   Private Property m_LayNbArrTgBtnImg As String = "/Resources/NewIcons/LightArrowOn.png"
+   Public ReadOnly Property LayNbArrTgBtnImg As String
+      Get
+         Return m_LayNbArrTgBtnImg
+      End Get
+   End Property
+
 #End Region    ' Messages
 
    ' Definizione comandi
@@ -615,6 +656,8 @@ Public Class SplitModeVM
    Sub New()
       ' Creo riferimento a questa classe in OmagOFFICEMap
       OmagOFFICEMap.SetRefSplitModeVM(Me)
+      ' leggo la configurazione
+      SetLayNbArrTgBtn_IsChecked((GetMainPrivateProfileInt(S_GENERAL, K_SHOWNBARROW, 1) <> 0))
    End Sub
 
 #End Region    ' CONSTRUCTOR
@@ -776,7 +819,7 @@ Public Class SplitModeVM
    End Sub
 
    Private Sub AddTopText(ByRef sName As String)
-      sName &= "  Top"
+      sName &= EgtMsg(91217)     '  Top
    End Sub
 
    Private Sub RemovePauseText(ByRef sName As String)
@@ -1163,6 +1206,11 @@ Public Class SplitModeVM
          ' Aggiungo a numero info con identificativo della lavorazione e viceversa
          EgtSetInfo(nNbrId, "MId", m_MachiningList(nI).m_nId)
          EgtSetInfo(m_MachiningList(nI).m_nId, "NbrId", nNbrId)
+         If Not m_LayNbArrTgBtn_IsChecked Then
+            EgtSetStatus(nNbrId, GDB_ST.OFF)
+         Else
+            EgtSetStatus(nNbrId, GDB_ST.ON_)
+         End If
       End If
       ' Se taglio con lama, metto la direzione accanto al numero
       If m_MachiningList(nI).m_nType = MCH_OY.SAWING Then
@@ -1174,6 +1222,11 @@ Public Class SplitModeVM
          ' Aggiungo a freccia info con identificativo della lavorazione e viceversa
          EgtSetInfo(nArrId, "MId", m_MachiningList(nI).m_nId)
          EgtSetInfo(m_MachiningList(nI).m_nId, "ArrId", nArrId)
+         If Not m_LayNbArrTgBtn_IsChecked Then
+            EgtSetStatus(nArrId, GDB_ST.OFF)
+         Else
+            EgtSetStatus(nArrId, GDB_ST.ON_)
+         End If
       Else
          m_MachiningList(nI).m_nArrId = GDB_ID.NULL
       End If
@@ -1290,6 +1343,13 @@ Public Class SplitModeVM
          EgtResetMark(nNbrId)
          EgtResetMark(nArrId)
       End If
+      If Not m_LayNbArrTgBtn_IsChecked And Not bMark Then
+         EgtSetStatus(nNbrId, GDB_ST.OFF)
+         EgtSetStatus(nArrId, GDB_ST.OFF)
+      Else
+         EgtSetStatus(nNbrId, GDB_ST.ON_)
+         EgtSetStatus(nArrId, GDB_ST.ON_)
+      End If
    End Sub
 
    Private Sub ColorNumberArrow(nI As Integer)
@@ -2265,7 +2325,7 @@ Public Class SplitModeVM
             If bFirstInd Then
                Dim ModifStartWindow As New ModifStartEndCutWindowV
                Dim ModifStartWindowVM As New ModifStartEndCutWindowVM
-               ModifStartWindowVM.Title = "Sawing"
+               ModifStartWindowVM.Title = EgtMsg(90791)  ' Sawing
                ModifStartWindow.DataContext = ModifStartWindowVM
                ModifStartWindow.Owner = Application.Current.MainWindow
                ModifStartWindowVM.SetVal(dOrigUsal)
@@ -2326,7 +2386,7 @@ Public Class SplitModeVM
             If bFirstMill Then
                Dim ModifStartWindow As New ModifStartEndCutWindowV
                Dim ModifStartWindowVM As New ModifStartEndCutWindowVM
-               ModifStartWindowVM.Title = "Milling"
+               ModifStartWindowVM.Title = EgtMsg(90793)     ' Milling
                ModifStartWindow.DataContext = ModifStartWindowVM
                ModifStartWindow.Owner = Application.Current.MainWindow
                ModifStartWindowVM.SetVal(dOrigUsal)
@@ -2363,7 +2423,7 @@ Public Class SplitModeVM
                ' Dialogo richiesta valori
                Dim ModifStartWnd As New ModifStartEndWjWindowV
                Dim ModifStartWndVM As New ModifStartEndWjWindowVM
-               ModifStartWndVM.Title = "Water jetting"
+               ModifStartWndVM.Title = EgtMsg(90798)     ' Water jetting
                ModifStartWnd.DataContext = ModifStartWndVM
                ModifStartWnd.Owner = Application.Current.MainWindow
                ModifStartWndVM.HoleVisibility = Visibility.Visible
@@ -2449,7 +2509,7 @@ Public Class SplitModeVM
             If bFirstInd Then
                Dim ModifStartWindow As New ModifStartEndCutWindowV
                Dim ModifStartWindowVM As New ModifStartEndCutWindowVM
-               ModifStartWindowVM.Title = "Sawing"
+               ModifStartWindowVM.Title = EgtMsg(90791)     ' Sawing
                ModifStartWindow.DataContext = ModifStartWindowVM
                ModifStartWindow.Owner = Application.Current.MainWindow
                ModifStartWindowVM.SetVal(dOrigUeal)
@@ -2504,7 +2564,7 @@ Public Class SplitModeVM
             If bFirstMill Then
                Dim ModifStartWindow As New ModifStartEndCutWindowV
                Dim ModifStartWindowVM As New ModifStartEndCutWindowVM
-               ModifStartWindowVM.Title = "Milling"
+               ModifStartWindowVM.Title = EgtMsg(90793)     ' Milling
                ModifStartWindow.DataContext = ModifStartWindowVM
                ModifStartWindow.Owner = Application.Current.MainWindow
                ModifStartWindowVM.SetVal(dOrigUeal)
@@ -2539,7 +2599,7 @@ Public Class SplitModeVM
                ' Dialogo richiesta valori
                Dim ModifStartWnd As New ModifStartEndWjWindowV()
                Dim ModifStartWndVM As New ModifStartEndWjWindowVM
-               ModifStartWndVM.Title = "Water jetting"
+               ModifStartWndVM.Title = EgtMsg(90798)     ' Water jetting
                ModifStartWnd.DataContext = ModifStartWndVM
                ModifStartWnd.Owner = Application.Current.MainWindow
                ModifStartWndVM.HoleVisibility = Visibility.Collapsed
@@ -2947,7 +3007,7 @@ Public Class SplitModeVM
                '(m_MainWindow, m_MainWindow.m_CurrentMachine.Qualities, "Quality")
                Dim ModifyQualityWnd As New ModifyQualityV
                Dim ModifyQuality As New ModifyQualityVM
-               ModifyQuality.Title = "Quality"
+               ModifyQuality.Title = EgtMsg(91673)    ' Quality
                ModifyQuality.QualityList = CurrentMachine.Qualities
                ModifyQualityWnd.DataContext = ModifyQuality
                ModifyQualityWnd.Owner = Application.Current.MainWindow
@@ -3040,6 +3100,12 @@ Public Class SplitModeVM
       Return bOk
    End Function
 
+   Friend Sub OnMouseDownScene_DoubleClick(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      OnMouseDownScene(sender, e)
+      If m_nSelected = GDB_ID.NULL Then Return
+      OnOff(Nothing)
+   End Sub
+
    Friend Sub OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Se tasto premuoto allora attivo la selezione multipla da Scena
       Dim bKeyCtrlPressed = (Keyboard.Modifiers And ModifierKeys.Control) > 0
@@ -3539,6 +3605,20 @@ Public Class SplitModeVM
          DeselectWJBridgesPart()
       End If
    End Sub
+
+   Friend Sub StatusOffNumbArrow(Status As GDB_ST)
+      For Each Item In m_MachiningList
+         Dim nOperId As Integer = Item.m_nId
+         Dim nNbrId As Integer = Item.m_nNbrId
+         Dim nArrId As Integer = Item.m_nArrId
+         Dim nInd As Integer = m_MachiningList.IndexOf(Item)
+         If nInd >= 0 AndAlso nInd < m_ItemList.Count AndAlso Not m_ItemList(nInd).IsSelected Then
+            EgtSetStatus(nNbrId, Status)
+            EgtSetStatus(nArrId, Status)
+         End If
+      Next
+      EgtDraw()
+   End Sub
 #End Region    ' EVENTS
 
    '-----------------------------------------------------------------------------------------------

OptionPanel/NestingTab/MultiSelectionVM.vb

@@ -1,5 +1,4 @@
 Imports EgtUILib
-Imports EgtWPFLib5
 
 Public Class MultiSelectionVM
    Inherits VMBase
@@ -8,24 +7,24 @@ Public Class MultiSelectionVM
 
    Public ReadOnly Property TitleMsg As String
       Get
-         Return "Multiple selection"
+         Return EgtMsg(91681)    ' Multiple selection
       End Get
    End Property
    Public ReadOnly Property SelectionMsg As String
       Get
-         Return "Number of Parts"
+         Return EgtMsg(91682)    ' Number of Parts
       End Get
    End Property
 
    Public ReadOnly Property OkMsg As String
       Get
-         Return "Ok"
+         Return EgtMsg(91651)    ' Ok
       End Get
    End Property
 
    Public ReadOnly Property CancelMsg As String
       Get
-         Return "Cancel"
+         Return EgtMsg(91652)    ' Cancel
       End Get
    End Property
 

OptionPanel/NestingTab/NestingTabVM.vb

@@ -407,6 +407,8 @@ Public Class NestingTabVM
          m_CsvImportWindow = New CsvWindowV(Application.Current.MainWindow, New CsvWindowVM)
          m_CsvImportWindow.Show()
       End If
+      ' Per sicurezza spengo la visualizzazione di tutti i percorsi di lavorazione
+      HideAllMachinings()
       EgtZoom(ZM.ALL)
       Return True
    End Function

OptionPanel/RawPartTab/OmagPhotoV.xaml

@@ -10,12 +10,10 @@
         d:DesignHeight="300" d:DesignWidth="300"
         Title="OmagPHOTO"
         ResizeMode="NoResize" ShowInTaskbar="False">
-    <EgtPHOTOLib:ProjectSlabV DataContext="{StaticResource ProjectSlabVM}"/>
-    <!--<DockPanel>
-        <Grid>
-            <ContentControl Content="{Binding OmagPhotoContent}"/>
-           
-        </Grid>
-    </DockPanel>-->
+    <DockPanel>
+      
+        <!--Progetto corrente-->
+        <EgtPHOTOLib:ProjectSlabV DataContext="{StaticResource ProjectSlabVM}"/>
 
+    </DockPanel>
 </EgtWPFLib5:EgtCustomWindow>

OptionPanel/RawPartTab/OmagPhotoV.xaml.vb

@@ -2,13 +2,11 @@
 
    'Private m_OmagPhotoVM As OmagPhotoVM
 
-   'Sub New(Owner As Window, OmagPhotoVM As OmagPhotoVM)
+   'Public Sub New(Owner As Window)
    '   MyBase.New(Owner)
-   '   ' This call is required by the designer.
+   '   'This call Is required by the designer.
    '   InitializeComponent()
-   '   Me.DataContext = OmagPhotoVM
-   '   ' Assegno al riferimento locale al VM il VM preso dal DataContext
-   '   m_OmagPhotoVM = OmagPhotoVM
+
    'End Sub
 
 End Class

OptionPanel/RawPartTab/RawPartTabVM.vb

@@ -1091,9 +1091,12 @@ Public Class RawPartTabVM
       ' Creo riferimento a questa classe in OmagOFFICEMap
       OmagOFFICEMap.SetRefRawPartTabVM(Me)
       If OmagOFFICEMap.refMainWindowVM.MainWindowM.m_SlabDB Then
-         'Me.OmagPhoto = New OmagPhotoV(Application.Current.MainWindow(), New OmagPhotoVM)
+         ' Me.OmagPhoto = New OmagPhotoV(Application.Current.MainWindow())
          Me.OmagPhoto = New OmagPhotoV
-         If Not PhotoMap.ContinueApplication Then End
+         If Not PhotoMap.ContinueApplication Then
+            EgtOutLog("Key protection denied to acces to DB photo, set configuration to image directory")
+            End
+         End If
       End If
       ' Aggiungo voci alla lista di tipi di definizione grezzo
       m_TypeList.Add(EgtMsg(MSG_RAWPARTPAGEUC + 1))
@@ -2255,6 +2258,13 @@ Public Class RawPartTabVM
          PhotoMap.refSearchPanelVM.InitSearchPanel()
          ' inizializzo la ricerca a tutti le lastre di tipo "AVAILABLE" (=1)
          PhotoMap.refSearchPanelVM.State = 1
+
+         ' Resetto la data corrente per la prima ricerca 
+         PhotoMap.refSearchPanelVM.StartAddedDate = Nothing
+         PhotoMap.refSearchPanelVM.NotifyPropertyChanged("StartAddedDate")
+         PhotoMap.refSearchPanelVM.EndAddedDate = Nothing
+         PhotoMap.refSearchPanelVM.NotifyPropertyChanged("EndAddedDate")
+
          PhotoMap.refSearchPanelVM.Search()
          ' inserisco in elenco solo i materiali della macchina corrente
          AddHandler PhotoMap.refOptionPanelVM.SlabIsSelectedOFFICE, AddressOf OmagOFFICEMap.refRawPartTabVM.ClosePhotoWnd
@@ -2264,10 +2274,9 @@ Public Class RawPartTabVM
          m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(2000)
          m_RefreshTimer.Start()
 
-         ' apro la finestra per accedere al DB delle lastre
+         ' apro la finestra per accedere al DB delle lastre (Devo crea una nuova istanza perchè la chiusura elimina la stessa)
          Me.OmagPhoto = New OmagPhotoV
-         OmagPhoto.ShowDialog()
-
+         Me.OmagPhoto.ShowDialog()
          m_RefreshTimer.Stop()
 
          EgtSetCurrentContext(EgtPHOTOLib.MainData.PreviousContext)

SideEntityControl/SideEntityControlVM.vb

@@ -70,7 +70,7 @@ Public Class SideEntityControlVM
             sMsg = EgtMsg(91653)
          ElseIf m_Mode = SideEntityControlVM.ModeOpt.ALZANDFRONT Then
             ' Alz
-            sMsg = "Alz."
+            sMsg = EgtMsg(91674)
          End If
          Return sMsg
       End Get
@@ -87,7 +87,7 @@ Public Class SideEntityControlVM
             sMsg = EgtMsg(91654)
          ElseIf m_Mode = SideEntityControlVM.ModeOpt.ALZANDFRONT Then
             ' Front
-            sMsg = "Front."
+            sMsg = EgtMsg(91675)
          End If
          Return sMsg
       End Get
@@ -617,7 +617,7 @@ Public Class SideEntityControlVM
       ElseIf m_Mode = ModeOpt.FILOTOP Then
          Parameter1Msg = EgtMsg(MSG_IMPORTPAGEUC + 10)      ' Offset
          Parameter2Msg = EgtMsg(MSG_IMPORTPAGEUC + 11)      ' Depth
-         Parameter5Msg = "Round Off"
+         Parameter5Msg = EgtMsg(91676)                      ' Round Off
          m_dOffsetFiloTop = GetMainPrivateProfileDouble(S_SIDES, K_FILOTOPOFFSET, 5)
          m_dDepthFiloTop = GetMainPrivateProfileDouble(S_SIDES, K_FILOTOPDEPTH, 5)
          m_bCornerRadius = GetMainPrivateProfileInt(S_SIDES, K_FILOTOPROUNDOFF, 0) <> 0
@@ -646,9 +646,9 @@ Public Class SideEntityControlVM
 
       ElseIf m_Mode = ModeOpt.ALZANDFRONT Then
          ' definisco i nomi dei campi
-         Parameter1Msg = "Spessore"
-         Parameter2Msg = "Altezza"
-         Parameter3Msg = "Delta Ang."
+         Parameter1Msg = EgtMsg(91677)    ' Spessore
+         Parameter2Msg = EgtMsg(91678)    ' Altezza
+         Parameter3Msg = EgtMsg(91679)    ' Delta Ang.
          ' carico i valori letti da file ini
          m_HeightA = GetMainPrivateProfileDouble("Alz&Front", "A_Height", 0)
          m_HeightF = GetMainPrivateProfileDouble("Alz&Front", "F_Height", 0)
@@ -1844,7 +1844,7 @@ Public Class SideEntityControlVM
       Dim sMsg As String = String.Empty
       ' eseguo la funzione per il disegno della componente (CMP_Draw)
       If Not EgtLuaExecLine("CMP_Draw" & "(true)") Then
-         sMsg = "Error in component execution"
+         sMsg = EgtMsg(91680)      ' Error in component execution
          'm_bDrawOk = False
       Else
          EgtLuaGetGlobStringVar("CMP" & ".MSG", sMsg)

TopCommandBar/TopCommandBarVM.vb

@@ -456,7 +456,6 @@ Public Class TopCommandBarVM
       If String.IsNullOrEmpty(sFilePath) Then EgtGetCurrFilePath(sFilePath)
       Dim nPartInRawsProj As Integer = 0
       Dim nGrpId = EgtGetFirstMachGroup()
-
       While nGrpId <> GDB_ID.NULL
          ' Imposto la macchinata corrente
          EgtSetCurrMachGroup(nGrpId)
@@ -468,7 +467,6 @@ Public Class TopCommandBarVM
          End While
          nGrpId = EgtGetNextMachGroup(nGrpId)
       End While
-
       nGrpId = EgtGetFirstMachGroup()
       While nGrpId <> GDB_ID.NULL
          ' percorso progetto
@@ -484,6 +482,8 @@ Public Class TopCommandBarVM
       EgtOutLog("     NbrProjParts:" & nPartInRawsProj.ToString)
       ' Reimposto la macchina corrente
       EgtSetCurrMachGroup(CurrGrpId)
+      ' Nascondo tutte le lavorazioni
+      CamAuto.HideAllMachinings()
    End Sub
 
 End Class