OmagOFFICE 3.1d2 :

- ricompilazione con cambio versione e piccoli aggiustamenti.

EgtStoneLib/EstCalc.vb

@@ -366,7 +366,7 @@ Module EstCalc
                Dim nRawGrpId As Integer = EgtGetFirstRawPart()
                While nRawGrpId <> GDB_ID.NULL
                   Dim nRawSolidId As Integer = EgtGetFirstNameInGroup(nRawGrpId, NAME_RAW_SOLID)
-                  If nRawSolidId <> GDB_ID.NULL Then EgtSetTextureName(nRawSolidId, PHOTO_NAME)
+                  If nRawSolidId <> GDB_ID.NULL Then EgtSetTextureName(nRawSolidId, GetPhotoName())
                   nRawGrpId = EgtGetNextRawPart(nRawGrpId)
                End While
             End If

EgtStoneLib/EstPhoto.vb

@@ -54,7 +54,7 @@ Module EstPhoto
       ' Recupero le dimensioni della tavola
       Dim b3Tab As New BBox3d
       If Not EgtGetTableArea(1, b3Tab) Then Return False
-      b3Tab.Expand(100, 100, 0)
+      b3Tab.Expand(1000, 1000, 0)
       ' Elimino eventuale precedente foto
       Dim nOldPhotoId = GetPhoto()
       If nOldPhotoId <> GDB_ID.NULL Then EgtErase(nOldPhotoId)
@@ -428,7 +428,9 @@ Module EstPhoto
       Dim nNewPhotoId As Integer = EgtAddPhoto2(GetPhotoName(), sPath, ptOri, ptCen, dDimX, dDimY, nPhGrpId, ptMin, ptMax)
       If nNewPhotoId = GDB_ID.NULL Then Return False
       ' Eseguo eventuale rotazione attorno all'origine
-      EgtRotatePhoto(nNewPhotoId, ptOri, Vector3d.Z_AX(), dRot)
+      If Math.Abs( dRot) > EPS_ANG_ZERO then
+         EgtRotatePhoto(nNewPhotoId, ptOri, Vector3d.Z_AX(), dRot)
+      End If
       ' Salvo gli offset
       EgtSetInfo(nNewPhotoId, "OffsX", dOffsetX)
       EgtSetInfo(nNewPhotoId, "OffsY", dOffsetY)

MainWindow/MainWindowM.vb

@@ -228,8 +228,8 @@ Public Class MainWindowM
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace( sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2707, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2707, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 3104, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 3104, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.OFFICE_BASE)
       ' Inizializzazione generale di EgtInterface

My Project/AssemblyInfo.vb

@@ -30,7 +30,7 @@ Imports System.Windows
 #End If
 <Assembly: AssemblyCompany("Egalware s.r.l.")> 
 <Assembly: AssemblyProduct("OmagOFFICE")>
-<Assembly: AssemblyCopyright("Copyright ©  2017-2025 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2017-2026 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")> 
 <Assembly: ComVisible(false)>
 'In order to begin building localizable applications, set 
@@ -69,6 +69,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.7.7.1")>
-<Assembly: AssemblyFileVersion("2.7.7.1")>
+<Assembly: AssemblyVersion("3.1.4.2")>
+<Assembly: AssemblyFileVersion("3.1.4.2")>
 

MyMachGroupPanel/MyMachGroupPanelVM.vb

@@ -117,10 +117,11 @@ Public Class MyMachGroupPanelVM
       ' Se macchina con più tavole, chiedo quale usare
       Dim nTabInd As Integer = 1
       Dim nTabCnt As Integer = CamAuto.GetTableCount()
-      If nTabCnt > 1 And nTabCnt <= 3 Then
-         Dim dlg As New SelectTableWindowV(Application.Current.MainWindow, New SelectTableWindowVM(DirectCast(nTabCnt, SelectTableWindowVM.TableNumOpt)))
-         dlg.ShowDialog()
-         nTabInd = dlg.m_SelTable
+      Dim SelectTableWindowVM As New SelectTableWindowVM()
+      If nTabCnt > 1 And nTabCnt <= 4 Then
+         Dim SelectTableWindowV As New SelectTableWindowV(Application.Current.MainWindow, SelectTableWindowVM)
+         SelectTableWindowV.ShowDialog()
+         nTabInd = SelectTableWindowVM.nSelectedTable
       End If
       EgtSetTable(GetTableName(nTabInd))
       ' leggo nome attrezzaggio di default

MyMachiningDbWindow/MyMachiningDbWindowV.xaml.vb

@@ -13,7 +13,7 @@ Public Class MyMachiningDbWindowV
       m_MachiningDbWindowVM = MachiningDbWindowVM
    End Sub
 
-   Private Sub CloseWindow(bDialogResult As Boolean) Handles m_MachiningDbWindowVM.m_CloseWindow
+   Private Sub CloseWindow(bDialogResult As Boolean) Handles m_MachiningDbWindowVM.OnCloseWindow
       Me.DataContext = Nothing
       Me.DialogResult = bDialogResult
    End Sub

MySetUpWindow/MySetUpWindowV.xaml.vb

@@ -22,7 +22,7 @@ Public Class MySetUpWindowV
       End If
    End Sub
 
-   Private Sub CloseWindow(bDialogResult As Boolean) Handles m_SetUpWindowVM.m_CloseWindow
+   Private Sub CloseWindow(bDialogResult As Boolean) Handles m_SetUpWindowVM.OnCloseWindow
       Me.DialogResult = bDialogResult
    End Sub
 

MyToolDbWindow/MyToolDbWindowV.xaml.vb

@@ -13,7 +13,7 @@ Public Class MyToolDbWindowV
       m_ToolDbWindowVM = ToolDbWindowVM
    End Sub
 
-   Private Sub ToolsDbView_Closed(bDialogResult As Boolean) Handles m_ToolDbWindowVM.m_CloseWindow
+   Private Sub ToolsDbView_Closed(bDialogResult As Boolean) Handles m_ToolDbWindowVM.OnCloseWindow
       ' Imposto contesto generale
       EgtSetCurrentContext(EgtWPFLib5.ToolDbWindowVM.ProjectSceneContext)
       ' Cancello contesto di visualizzazione utensile

MyWaterjetDbWindow/MyWaterjetDbWindowV.xaml.vb

@@ -13,7 +13,7 @@ Public Class MyWaterjetDbWindowV
       m_WaterjetDbWindowVM = WaterjetDbWindowVM
    End Sub
 
-   Private Sub CloseWindow(bDialogResult As Boolean) Handles m_WaterjetDbWindowVM.m_CloseWindow
+   Private Sub CloseWindow(bDialogResult As Boolean) Handles m_WaterjetDbWindowVM.OnCloseWindow
       Me.DialogResult = bDialogResult
    End Sub
 

OptionPanel/NestingTab/ChangeTableV.xaml

@@ -5,8 +5,7 @@
                             xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
                             Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"                    
                             WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="False"
-                            IsMinimizable="False" WindowStartupLocation="CenterScreen"
-                            CloseCommand="{Binding CloseCommand,Mode=OneWay,UpdateSourceTrigger=PropertyChanged}"                   
+                            IsMinimizable="False" WindowStartupLocation="CenterScreen" IsClosable="False"
                             Title="{Binding sTitle}" Height="150" Width="320">
    <Grid>
       <Grid.RowDefinitions>

OptionPanel/NestingTab/ChangeTableVM.vb

@@ -1,5 +1,8 @@
 Public Class ChangeTableVM
    Inherits VMBase
+
+#Region "FIELDS & PROPERTIES"
+
    Private m_refChanTableV As ChangeTableV
 
    Public Enum EnumDialogResult
@@ -28,21 +31,30 @@
       End Get
    End Property
 
+   Private m_CurrTableList As New List(Of TableToChange)
+   Public ReadOnly Property CurrTableList As List(Of TableToChange)
+      Get
+         Return m_CurrTableList
+      End Get
+   End Property
+
+   ' Definizione Comandi
    Private m_cmdOk As ICommand
    Private m_cmdCancel As ICommand
 
+#End Region    ' Fields & Properties
+
+#Region "CONSTRUCTOR"
+
    Sub New(refV As ChangeTableV)
       m_refChanTableV = refV
       ' Procedo alla creazione della lista delle tavole disponibili
       Initialized()
    End Sub
 
-   Private m_CurrTableList As New List(Of TableToChange)
-   Public ReadOnly Property CurrTableList As List(Of TableToChange)
-      Get
-         Return m_CurrTableList
-      End Get
-   End Property
+#End Region    ' Constructor
+
+#Region "METHODS"
 
    Private Sub Initialized()
       ' recuepero l'inidce della tavola corrente
@@ -53,6 +65,12 @@
       Next
    End Sub
 
+#End Region    ' Methods
+
+#Region "COMMANDS"
+
+#Region "OkCommand"
+
    Public ReadOnly Property OkCommand() As ICommand
       Get
          If m_cmdOk Is Nothing Then
@@ -62,15 +80,6 @@
       End Get
    End Property
 
-   Public ReadOnly Property CancelCommand() As ICommand
-      Get
-         If m_cmdCancel Is Nothing Then
-            m_cmdCancel = New Command(AddressOf Cancel)
-         End If
-         Return m_cmdCancel
-      End Get
-   End Property
-
    Private Sub Ok()
       ' recupero l'indice della tavola impostata
       For Each ItemTab As TableToChange In CurrTableList
@@ -84,17 +93,36 @@
       m_refChanTableV.Close()
    End Sub
 
+#End Region    ' OkCommand
+
+#Region "CancelCommand"
+
+   Public ReadOnly Property CancelCommand() As ICommand
+      Get
+         If m_cmdCancel Is Nothing Then
+            m_cmdCancel = New Command(AddressOf Cancel)
+         End If
+         Return m_cmdCancel
+      End Get
+   End Property
+
    Private Sub Cancel()
       m_MyDialogResult = EnumDialogResult.CANCEL
       ' procedo alla chiusura della finetra
       m_refChanTableV.Close()
    End Sub
 
+#End Region    ' CancelCommand
+
+#End Region    ' Commands
+
 End Class
 
 Public Class TableToChange
    Inherits VMBase
 
+#Region "FIELDS & PROPERTIES"
+
    Private Property m_sName As String = "Tab"
    Public ReadOnly Property sName As String
       Get
@@ -133,11 +161,17 @@ Public Class TableToChange
       End Set
    End Property
 
+#End Region    ' Fields & Properties
+
+#Region "CONSTRUCTOR"
+
    Public Sub New(Name As String, Ind As Integer, IsCurrent As Boolean)
       m_sName = Name & " " & Ind.ToString
       m_nIndex = Ind
       m_bIsActive = IsCurrent
-      NotifyPropertyChanged("IsActive")
+      NotifyPropertyChanged(NameOf(IsActive))
    End Sub
 
+#End Region    ' Constructor
+
 End Class

OptionPanel/NestingTab/NestingTabVM.vb

@@ -1,5 +1,6 @@
-Imports EgtWPFLib5
+Imports System.Drawing
 Imports EgtUILib
+Imports EgtWPFLib5
 Imports OmagOFFICE.ChangeTableVM
 
 Public Class NestingTabVM
@@ -585,9 +586,7 @@ Public Class NestingTabVM
       m_bStartRot = False
    End Sub
 
-   Friend Function RotateAllRawParts(dAngDeg As Double, Optional bIsReg As Boolean = True) As Boolean
-      ' Recupero rotazione totale
-      Dim dRegRot As Double = CamAuto.GetRegistrationRotation()
+   Friend Function RotateAllRawParts(dAngDeg As Double) As Boolean
       ' Recupero il centro del grezzo iniziale per usarlo come centro della rotazione
       Dim ptCen As New Point3d
       GetRawCenter(ptCen)
@@ -641,7 +640,7 @@ Public Class NestingTabVM
             End While
             nRevPhase += 1
          End While
-         ' Altrimenti eseguo sistemazioni
+      ' Altrimenti eseguo sistemazioni
       Else
          ' Origine della tavola
          Dim ptOri As Point3d
@@ -704,17 +703,20 @@ Public Class NestingTabVM
             End If
             nOpeId = EgtGetNextActiveOperation(nOpeId)
          End While
-         ' Se non è registrazione, ruoto anche l'eventuale foto della lastra
-         'If Not bIsReg Then
-         '   Dim nPhotoId = m_CurrProjPage.GetPhoto()
-         '   If nPhotoId <> GDB_ID.NULL then EgtRotatePhoto(nPhotoId, ptCen, Vector3d.Z_AX(), dAngDeg)
-         'End If
-         ' Aggiorno rotazione totale
-         If bIsReg Then
-            CamAuto.SetRegistrationRotation(dRegRot + dAngDeg)
-         Else
-            CamAuto.SetRegistrationRotation(0)
+         ' Ruoto anche l'eventuale foto della lastra e sistemo il riferimento sul grezzo
+         Dim nPhotoId = EstPhoto.GetPhoto()
+         If nPhotoId <> GDB_ID.NULL then
+            Dim dOldRot As Double = 0
+            EgtGetInfo(nPhotoId, "Rot", dOldRot)
+            EgtRotatePhoto(nPhotoId, ptCen, Vector3d.Z_AX(), dAngDeg)
+            EgtSetInfo(nPhotoId, "Rot", dOldRot + dAngDeg)
+            Dim refTxr As New Frame3d
+            GetPhotoTextureRef(refTxr)
+            Dim nSolidId = EgtGetFirstNameInGroup(EgtGetFirstRawPart(), NAME_RAW_SOLID)
+            EgtSetTextureFrame(nSolidId, refTxr, GDB_RT.GLOB)
          End If
+         ' Aggiorno rotazione totale
+         CamAuto.SetRegistrationRotation(0)
          ' Dichiaro grezzo per punti
          EgtSetInfo(GetCurrentRaw(), KEY_RAWBYPOINTS, 1)
       End If
@@ -778,8 +780,11 @@ Public Class NestingTabVM
             nRevPhase += 1
          End While
       End If
-      ' Muovo i punti SpotReg generati nel programma OFFICE
       If bMoveOk Then
+         ' Traslo anche l'eventuale foto della lastra
+         Dim nPhotoId = EstPhoto.GetPhoto()
+         If nPhotoId <> GDB_ID.NULL then EgtMovePhoto(nPhotoId, vtMove)
+         ' Muovo i punti SpotReg generati nel programma OFFICE
          OmagOFFICEMap.refRawPartTabVM.MoveAllSpotRegistration(vtMove)
       End If
       ' Ripristino lo stato iniziale
@@ -2414,7 +2419,7 @@ Public Class NestingTabVM
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nPartId, nStat)
 
-            ' verifico se l'lemento selezionato è il numero di pezzi
+            ' verifico se l'elemento selezionato è il numero di pezzi
             If EgtGetType(nId) = GDB_TY.EXT_TEXT Then
                Dim NameLayer As String = String.Empty
                EgtGetName(EgtGetParent(nId), NameLayer)
@@ -2463,10 +2468,21 @@ Public Class NestingTabVM
                ' se non è stata eseguita nessuna scelta esco dal ciclo 
                If ChgTbVM.MyDialogResult = EnumDialogResult.CANCEL Or ChgTbVM.nSelectedTable = 0 Then Exit While
 
-               ' recupero il nome della tavola corrente
+               ' salvo l'origine della precente tavola
+               Dim ptOldTabOri As Point3d
+               EgtGetTableRef( 1, ptOldTabOri)
+
+               ' recupero il nome della nuova tavola corrente
                Dim sOtherTab As String = GetTableName(ChgTbVM.nSelectedTable)
 
                EgtChangeTable(sOtherTab, True)
+               ' Traslo anche l'eventuale foto della lastra
+               Dim nPhotoId = EstPhoto.GetPhoto()
+               If nPhotoId <> GDB_ID.NULL then
+                  Dim ptTabOri As Point3d
+                  EgtGetTableRef( 1, ptTabOri)
+                  EgtMovePhoto(nPhotoId, ptTabOri - ptOldTabOri)
+               End If
                EstCalc.AdjustAdditionalTable(True)
                EgtSetMachineLook(MCH_LOOK.TAB)
                ' aggiorno le lavorazioni
@@ -2509,10 +2525,10 @@ Public Class NestingTabVM
                   EgtSetCurrPhase(1)
                   ' Rotazione
                   Dim dAngRot As Double = If(sOtherTab = SECOND_TAB, 180, -180)
-                  If Not RotateAllRawParts(dAngRot, False) Then
+                  If Not RotateAllRawParts(dAngRot) Then
                      'm_CurrProjPage.SetWarningMessage(EgtMsg(90339))        'Rotazione impossibile
                   End If
-                  ' Traslazione per riportare la lastra nella stessa posizione rispetto all'angolo BL che diveta TR e viceversa
+                  ' Traslazione per riportare la lastra nella stessa posizione rispetto all'angolo BL che diventa TR e viceversa
                   Dim b3Raw As New BBox3d
                   GetRawBox(b3Raw)
                   Dim vtMove As Vector3d
@@ -2538,7 +2554,7 @@ Public Class NestingTabVM
 
                ' visualizzazione
                EgtZoom(ZM.ALL)
-               ' Elimino il datacontext della finsetra per la selezione della tavola
+               ' Elimino il datacontext della finestra per la selezione della tavola
                ChgTbVM = Nothing
                Exit While
             End If

SelectTableWindow/SelectTableWindowV.xaml

@@ -1,56 +1,60 @@
 <EgtWPFLib5:EgtCustomWindow x:Class="SelectTableWindowV"
-   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
-   IsClosable="False"
-   IsMinimizable="False"
-   ShowInTaskbar="False"
-   Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
-   SizeToContent="WidthAndHeight"
-   Title="{Binding Title}"
-   WindowStartupLocation="CenterOwner" ResizeMode="NoResize">
+                            xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+                            xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+                            xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+                            Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"                    
+                            WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="False"
+                            IsMinimizable="False" WindowStartupLocation="CenterScreen" IsClosable="False"
+                            Title="{Binding  Title}" Height="150" Width="320">
 
-   <Grid HorizontalAlignment="Center"
-         VerticalAlignment="Center"
-         Margin="10,10,10,20">
-      <Grid.ColumnDefinitions>
-         <ColumnDefinition Width="Auto"/>
-         <ColumnDefinition Width="Auto"/>
-         <ColumnDefinition Width="Auto"/>
-      </Grid.ColumnDefinitions>
+   <Grid>
       <Grid.RowDefinitions>
-         <RowDefinition Height="1*"/>
+         <RowDefinition Height="2*"/>
          <RowDefinition Height="1*"/>
       </Grid.RowDefinitions>
+      <ItemsControl ItemsSource="{Binding CurrTableList}">
+            <!--Definisco l'organizzazione dei comandi-->
+            <ItemsControl.ItemsPanel>
+               <ItemsPanelTemplate>
+                  <StackPanel Orientation="Horizontal" 
+                              HorizontalAlignment="Center" 
+                              VerticalAlignment="Center"/>
+               </ItemsPanelTemplate>
+            </ItemsControl.ItemsPanel>
+            <!--Definisco il contenuto del comando-->
+            <ItemsControl.ItemTemplate>
+               <DataTemplate>
+                  <RadioButton GroupName="TabGrp" 
+                               IsChecked="{Binding IsActive}"
+                               Width="60" Height="60"
+                               Style="{DynamicResource ChangeTable_ToggleButton}">
+                     <Grid>
+                        <!--Nome della tavole: Tab #-->
+                        <TextBlock Text="{Binding sName}" 
+                                   HorizontalAlignment="Center"
+                                   Background="Transparent">
+                           <TextBlock.Style>
+                              <Style TargetType="{x:Type TextBlock}">
+                                 <Setter Property="Foreground" Value="{StaticResource Omag_LightGray}"/>
+                                 <Style.Triggers>
+                                    <DataTrigger Binding="{Binding IsChecked, RelativeSource={RelativeSource AncestorType=RadioButton}}" Value="True">
+                                       <Setter Property="Foreground" Value="{StaticResource Omag_White}"/>
+                                    </DataTrigger>
+                                 </Style.Triggers>
+                              </Style>
+                           </TextBlock.Style>
+                        </TextBlock>
+                        <!--Rappresentazione di una tavola di lavoro-->
+                        <Image Source="{Binding ImgTab}" Margin="0,20,0,0"/>
+                     </Grid>
 
-      <TextBlock Text="{Binding WndMsg}"
-                 FontSize="18"
-                 Grid.ColumnSpan="3"
-                 Margin="0,0,0,10"/>
-
-      <Button Grid.Column="0" Grid.Row="1"
-              Content="1" FontSize="40"
-              Style="{StaticResource OptionPanel_NestingButton}"
-              Command="{Binding Table_Command}"
-              CommandParameter="1"
-              Margin="10,0,10,0">
-      </Button>
-      <Button Grid.Column="1" Grid.Row="1"
-              Content="2" FontSize="40"
-              Style="{StaticResource OptionPanel_NestingButton}"
-              Command="{Binding Table_Command}"
-              CommandParameter="2"
-              Margin="10,0,10,0">
-      </Button>
-      <Button Grid.Column="2" Grid.Row="1"
-              Content="3" FontSize="40"
-              Style="{StaticResource OptionPanel_NestingButton}"
-              Command="{Binding Table_Command}"
-              CommandParameter="3"
-              Visibility="{Binding Table3_Visibility}"
-              Margin="10,0,10,0">
-      </Button>
-
+                  </RadioButton>
+               </DataTemplate>
+            </ItemsControl.ItemTemplate>
+         </ItemsControl>
+         <Button Grid.Row="1" Content="Ok" Margin="5" 
+                 Command="{Binding OkCommand}"
+                 Style="{StaticResource OptionPanel_TextButton}"/>
    </Grid>
 
 </EgtWPFLib5:EgtCustomWindow>

SelectTableWindow/SelectTableWindowV.xaml.vb

@@ -1,7 +1,6 @@
 Public Class SelectTableWindowV
 
    Private WithEvents m_SelectTableWindowVM As SelectTableWindowVM
-   Public m_SelTable As Integer
 
    Sub New(Owner As Window, SelectTableWindowVM As SelectTableWindowVM)
       MyBase.New(Owner)
@@ -13,7 +12,6 @@
    End Sub
 
    Private Sub CloseWindow(DialogResult As Integer) Handles m_SelectTableWindowVM.m_CloseWindow
-      m_SelTable = DialogResult
       Me.DialogResult = True
    End Sub
 

SelectTableWindow/SelectTableWindowVM.vb

@@ -1,26 +1,24 @@
 Imports EgtUILib
-Imports EgtWPFLib5
 
 Public Class SelectTableWindowVM
    Inherits VMBase
 
 #Region "FIELDS & PROPERTIES"
 
-   Public Enum TableNumOpt As Integer
-      TWO = 2
-      THREE = 3
-   End Enum
-
    Friend Event m_CloseWindow(DialogResult As Integer)
 
-   Private m_Table3_Visibility As Visibility
-   Public Property Table3_Visibility As Visibility
+   Private m_nSelectedTable As Integer = 0
+   Public ReadOnly Property nSelectedTable As Integer
       Get
-         Return m_Table3_Visibility
+         Return m_nSelectedTable
+      End Get
+   End Property
+
+   Private m_CurrTableList As New List(Of TableToChange)
+   Public ReadOnly Property CurrTableList As List(Of TableToChange)
+      Get
+         Return m_CurrTableList
       End Get
-      Set(value As Visibility)
-         m_Table3_Visibility = value
-      End Set
    End Property
 
 #Region "Messages"
@@ -40,41 +38,49 @@ Public Class SelectTableWindowVM
 #End Region
 
    ' Definizione comandi
-   Private m_cmdTable As ICommand
+   Private m_cmdOk As ICommand
 
 #End Region    ' FIELDS & PROPERTIES
 
 #Region "CONSTRUCTOR"
 
-   Sub New(nTableNum As TableNumOpt)
-      If nTableNum = TableNumOpt.TWO Then
-         m_Table3_Visibility = Visibility.Collapsed
-      Else
-         m_Table3_Visibility = Visibility.Visible
-      End If
-      NotifyPropertyChanged("Table3_Visibility")
+   Sub New()
+      ' recuepero l'inidce della tavola corrente
+      Dim nIndeXCurrTab As Integer = GetCurrentTable()
+      ' creo la lista delle tavole disponibili (attivo il bottone della tavola attualmente in uso)
+      For nInd As Integer = 0 To GetTableCount() - 1
+         m_CurrTableList.Add(New TableToChange("Tab", (nInd + 1), ((nInd + 1) = nIndeXCurrTab)))
+      Next
    End Sub
 
 #End Region    ' CONSTRUCTOR
 
 #Region "COMMANDS"
 
-#Region "Table"
+#Region "OkCommand"
 
-   Public ReadOnly Property Table_Command As ICommand
+   Public ReadOnly Property OkCommand() As ICommand
       Get
-         If m_cmdTable Is Nothing Then
-            m_cmdTable = New Command(AddressOf Table)
+         If m_cmdOk Is Nothing Then
+            m_cmdOk = New Command(AddressOf Ok)
          End If
-         Return m_cmdTable
+         Return m_cmdOk
       End Get
    End Property
 
-   Public Sub Table(ByVal param As Object)
+   Private Sub Ok(ByVal param As Object)
+      ' recupero l'indice della tavola impostata
+      For Each ItemTab As TableToChange In CurrTableList
+         If ItemTab.IsActive Then
+            m_nSelectedTable = ItemTab.nIndex
+            Exit For
+         End If
+      Next
+      ' procedo alla chiusura della finetra
       RaiseEvent m_CloseWindow(CInt(param))
    End Sub
 
-#End Region     ' DrawCommand
+#End Region    ' OkCommand
 
 #End Region    ' COMMANDS