Gestione massima dimensione finestra CSV

- corretta gestione angolo di rotazione pezzi con misure pollici (veniva moltiplicato per 25.4 come fosse una lunghezza) presente da ver 2.3b2
- uscendo da gestione grezzo senza alcun grezzo ora si nasconde la eventuale foto.

CompoWindow/CompoParamPage/CompoParamPageVM.vb

@@ -67,8 +67,8 @@ Public Class CompoParamPageVM
    Private m_AlzAndFront_Visibility As Visibility 
    Public Property AlzAndFront_Visibility As Visibility
       Get
-         ' !!!! Temporaneamente in attesa di completamento Frontalini e alzatine !!!!
-         Return Visibility.Collapsed 
+         '' !!!! Temporaneamente in attesa di completamento Frontalini e alzatine !!!!
+         'Return Visibility.Collapsed 
          Return m_AlzAndFront_Visibility
       End Get
       Set(value As Visibility)
@@ -411,8 +411,13 @@ Public Class CompoParamPageVM
                                                             CompoWindowMap.refCompoSceneHostV.CompoScene,
                                                             SideEntityControlVM.ModeOpt.ENGRAVE)
             SideEntityControl = New SideEntityControlV(m_SideEntityControlVM)
+            If m_SideEntityControlVM.SideEntityList.Count < 1 Then
+               ' eventulmente stamnpare messaggio!
+               ' OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+               ' OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Lavorazioni non disponibile", MSG_TYPE.WARNING)
+            End If
          Else
-            SideAngle_IsEnabled = True
+               SideAngle_IsEnabled = True
             Drip_IsEnabled = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.UNDER_CUT) And
                              Not String.IsNullOrWhiteSpace(CurrentMachine.sCurrDripSaw)
             FiloTop_IsEnabled = True
@@ -582,10 +587,13 @@ Public Class CompoParamPageVM
          EgtLuaGetGlobBoolVar(LUA_CMP_WITHINT, bHasInternalCompo)
          Internal_Visibility = If(bHasInternalCompo, Visibility.Visible, Visibility.Collapsed)
          SideEntity_Visibility = Visibility.Visible
+         ' verifico che esista la configurazione per le alzatine e i frontalini
+         Dim sVariable As String = String.Empty
+         Dim bEnableAlzAndFront As Boolean = GetMainPrivateProfileString("Alz&Front", "Alz&Front", "", sVariable) <> 0
          ' verifio se abilitare il bottone per inserire le Alz&Front
          Dim sCMPName As String = String.Empty
          If EgtLuaGetGlobStringVar("CMP.Nome", sCMPName) Then
-            If sCMPName.StartsWith("PCucina") Or sCMPName.StartsWith("PBagno") Then
+            If bEnableAlzAndFront And sCMPName.StartsWith("PCucina") Or sCMPName.StartsWith("PBagno") Then
                AlzAndFront_Visibility = Visibility.Visible
             Else
                AlzAndFront_Visibility = Visibility.Collapsed
@@ -616,12 +624,15 @@ Public Class CompoParamPageVM
          AddRemove_Visibility = Visibility.Collapsed
          Back_Visibility = Visibility.Visible
          Internal_Visibility = Visibility.Visible
-         AlzAndFront_Visibility = Visibility.Visible
+         ' verifico che esista la configurazione per le alzatine e i frontalini
+         Dim sVariable As String = String.Empty
+         Dim bEnableAlzAndFront As Boolean = GetMainPrivateProfileString("Alz&Front", "Alz&Front", "", sVariable) <> 0
+         AlzAndFront_Visibility = If(bEnableAlzAndFront, Visibility.Visible, Visibility.Collapsed)
          SideEntity_Visibility = Visibility.Visible
          ' verifio se abilitare il bottone per inserire le Alz&Front
          Dim sCMPName As String = String.Empty
          If EgtLuaGetGlobStringVar("CMP.Nome", sCMPName) Then
-            If sCMPName.StartsWith("PCucina") Or sCMPName.StartsWith("PBagno") Then
+            If bEnableAlzAndFront And sCMPName.StartsWith("PCucina") Or sCMPName.StartsWith("PBagno") Then
                AlzAndFront_Visibility = Visibility.Visible
             Else
                AlzAndFront_Visibility = Visibility.Collapsed

CompoWindow/CompoWindowVM.vb

@@ -354,7 +354,7 @@ Public Class CompoWindowVM
 
    Friend Function MakeMultipleInsert(ByVal nNbr As Integer, sName As String) As Boolean
 
-      'Dim InsertColor As Color3d = CompoColor(m_MainWindow.GetIniFile())
+      Dim InsertColor As Color3d = CompoColor(IniFile.m_sIniFile)
 
       ' Imposto il contesto corrente
       EgtSetCurrentContext(CompoWindowMap.refCompoSceneHostV.CompoScene.GetCtx())
@@ -364,6 +364,9 @@ Public Class CompoWindowVM
       ' Cancello layer regioni per selezione buchi
       Pz = EgtGetFirstGroupInGroup(GDB_ID.ROOT)
 
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As String = String.Empty
+
       While Pz <> -1
          ' imposto il contesto corrente
          EgtSetCurrentContext(CompoWindowMap.refCompoSceneHostV.CompoScene.GetCtx())
@@ -492,12 +495,12 @@ Public Class CompoWindowVM
          EstCalc.SetTextColor(nRegLayId)
 
          ' Imposto il colore del pezzo inserito nel progetto
-         'EgtSetColor(nRegLayId, InsertColor)
-         'Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
-         'While EntId <> GDB_ID.NULL
-         '   If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
-         '   EntId = EgtGetNext(EntId)
-         'End While
+         EgtSetColor(nRegLayId, InsertColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
+            EntId = EgtGetNext(EntId)
+         End While
 
          ' Esporto il pezzo in un file temporaneo
          Dim sTmpFile As String = OmagOFFICEMap.refMainWindowVM.MainWindowM.sTempDir & "\FlatPartCompo.Nge"
@@ -513,6 +516,9 @@ Public Class CompoWindowVM
          EgtEraseEmptyParts()
          ' Area dei nuovi pezzi
          Dim dNewArea As Double = 0
+         If nNbr > 1 Then
+            sGUICode = System.Guid.NewGuid.ToString
+         End If
          ' Se esiste il file del pezzo
          If My.Computer.FileSystem.FileExists(sTmpFile) Then
             ' eseguo inserimento
@@ -527,8 +533,15 @@ Public Class CompoWindowVM
                If m_bTrfData Then EgtSetInfo(nId2, "CsvPart", CompoWindowMap.refCompoManagerVM.sTrfOrderCode & "-" & nId2.ToString())
                ' Aggiorno l'area dei nuovi pezzi
                dNewArea += GeomCalc.GetPartArea(nId2)
-               ' Inserisco in parcheggio
+
+               ' assegno l'identificatico del pezzo, se esiste
+               If Not String.IsNullOrEmpty(sGUICode) Then
+                  Dim sPreGuid As String = EstCalc.CreatePreGuidCode(nId2)
+                  EgtSetInfo(nId2, INFO_REFGROUP, sPreGuid & sGUICode)
+               End If
+               ' muovo il pezzo nella prima posizione di parcheggio libera
                EstCalc.StoreOnePart(nId2, True)
+
                ' Aggiungo riferimento e lo inserisco in VeinMatching
                VeinMatching.SetRefOnPart(nId2)
                VeinMatching.AddPart(nId2, True)

Constants/ConstIni.vb

@@ -86,6 +86,8 @@ Module ConstIni
    Public Const K_SIDEMODE As String = "SideMode"
    Public Const K_TRFDATA As String = "TrfData"
    Public Const K_CSVDATA As String = "CsvData"
+   Public Const K_LASTCOLOR As String = "LastColor"
+   Public Const K_COLOR As String = "Color"
 
    Public Const S_FLATPARTS As String = "FlatParts"
    Public Const K_FLPCURRDIR As String = "CurrDir"
@@ -119,6 +121,10 @@ Module ConstIni
    Public Const K_TEXTCOLOR As String = "TextColor"
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
+   Public Const K_DRAGRETTANGLE As String = "DragRectangle"
+
+   Public Const S_SPLIT As String = "Split"
+   Public Const K_MOVE_LEV As String = "MoveLevel"
 
    Public Const S_CSV As String = "Csv"
    Public Const K_CSVDIRECT As String = "Direct"
@@ -127,6 +133,7 @@ Module ConstIni
    Public Const K_CSVCURRDIR As String = "CurrDir"
    Public Const K_CSVLASTFILE As String = "LastFile"
    Public Const K_THICKTOLERANCE As String = "ThickTolerance"
+   Public Const K_FULL As String = "Full"
 
    Public Const S_COLORTOSIDEANG As String = "ColorToSideAng"
    Public Const K_CTSA_ENABLE As String = "Enable"

CsvWindow/CsvWindowV.xaml

@@ -10,6 +10,7 @@
    Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
    WindowStartupLocation="CenterOwner"
    MinWidth="270" MinHeight="250"
+   MaxWidth="500"                         
    ResizeMode="NoResize">
 
    <DockPanel Margin="5,5,5,0">

CsvWindow/CsvWindowVM.vb

@@ -1,4 +1,5 @@
 Imports System.Collections.ObjectModel
+Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib5
 
@@ -110,6 +111,8 @@ Public Class CsvWindowVM
 #Region "METHODS"
 
    Private Sub ShowTreeView()
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
       ' Path del file Csv
       Dim TempPath As New Text.StringBuilder(260)
       PathCompactPathEx(TempPath, CsvM.CsvPath, 56, 0)
@@ -118,6 +121,7 @@ Public Class CsvWindowVM
       m_CsvTypeList.Clear()
       Dim sCurrMat As String = String.Empty
       Dim dCurrTh As Double = 0
+      Dim sCurrPath As String = String.Empty
       Dim nCatToNest As Integer = 0
       Dim nCatCount As Integer = 0
       Dim PartCathegory As New CsvPartType("", 0)
@@ -128,15 +132,29 @@ Public Class CsvWindowVM
          If i = 1 Then
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
          ElseIf String.Compare(sCurrMat, CurrPart.m_sMaterial, True) <> 0 Or
+                String.Compare(sCurrPath, CurrPart.m_sPath, True) <> 0 Or
                 Math.Abs(dCurrTh - CurrPart.m_dTh) > 10 * EPS_SMALL Then
-            PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
-                                 " - " & LenToString(dCurrTh, 2) &
-                                 " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+
+            If bFull Then
+               PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
+                                    " - " & LenToString(dCurrTh, 2) &
+                                    " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
+            Else
+               PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
+            End If
             PartCathegory.IsExpanded = True
             CsvTypeList.Add(PartCathegory)
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
             PartCathegory = New CsvPartType("", 0)
             nCatToNest = 0
             nCatCount = 0
@@ -150,18 +168,31 @@ Public Class CsvWindowVM
          PartCathegory.CsvPartList.Add(New CsvPartItem(CurrPart.m_sName, i, sCount, sDim, CurrPart.m_bActive))
       Next
       ' Inserisco ultima categoria
-      PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
-                           " - " & LenToString(dCurrTh, 2) &
-                           " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+      If bFull Then
+         PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
+                              " - " & LenToString(dCurrTh, 2) &
+                              " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
+      Else
+         PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
+      End If
       PartCathegory.IsExpanded = True
       CsvTypeList.Add(PartCathegory)
       NotifyPropertyChanged("CsvTypeList")
    End Sub
 
    Private Sub UpdateTreeView()
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
       For Each CatItem As CsvPartType In m_CsvTypeList
          Dim sCurrMat As String = String.Empty
          Dim dCurrTh As Double = 0
+         Dim sCurrPath As String = String.Empty
          Dim nCatToNest As Integer = 0
          Dim nCatCount As Integer = 0
          For Each PrtItem As CsvPartItem In CatItem.CsvPartList
@@ -171,12 +202,23 @@ Public Class CsvWindowVM
             PrtItem.sText1 = sCount
             sCurrMat = PartData.m_sMaterial
             dCurrTh = PartData.m_dTh
+            sCurrPath = PartData.m_sPath
             nCatToNest += PartData.m_nToNest
             nCatCount += PartData.m_nCount + PartData.m_nAdd
          Next
-         CatItem.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
-                        " - " & LenToString(dCurrTh, 2) &
-                        " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If bFull Then
+            CatItem.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
+                           " - " & LenToString(dCurrTh, 2) &
+                           " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
+         Else
+            CatItem.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
+         End If
       Next
    End Sub
 

CurrMachWindow/CurrMachWindowV.xaml

@@ -71,7 +71,7 @@
           <!--Quality-->
           <ComboBox ItemsSource="{Binding CurrWaterjettingQualityList}"
                     SelectedItem="{Binding SelCurrWaterjettingQuality}"
-                    Visibility="{Binding CurrWaterjettingQuality_Visibility}"
+                    Visibility="{Binding CurrWaterjetting_Visibility}"
                     Margin="5,0,0,5"
                     Grid.Column="1">
           </ComboBox>

CurrMachWindow/CurrMachWindowVM.vb

@@ -290,7 +290,7 @@ Public Class CurrMachWindowVM
       End Set
    End Property
 
-   Private m_CurrWaterjetting_Visibility As Visibility
+   Private m_CurrWaterjetting_Visibility As Visibility = Visibility.Collapsed
    Public Property CurrWaterjetting_Visibility As Visibility
       Get
          Return m_CurrWaterjetting_Visibility
@@ -659,7 +659,7 @@ Public Class CurrMachWindowVM
             Dim MachiningMaterials() = SysNotes.Split(";".ToCharArray)
 
             If CurrentMachine.bWaterJet And CurrentMachine.bFromDBWaterJet Then
-               For Each Material As Object In MachiningMaterials
+               For Each Material As String In MachiningMaterials
                   Dim Param() As String = Material.Split(",".ToCharArray)
                   If Param.Count() < 2 Then Continue For
                   Dim CurrMatId As String = String.Empty
@@ -672,7 +672,8 @@ Public Class CurrMachWindowVM
                      End If
                   Next
                   Dim SubParam() As String = Param(0).Split(".".ToCharArray)
-                  If SubParam(0) = CurrentMachine.CurrMat.nId.ToString() AndAlso SubParam.Count > 1 AndAlso SubParam(1) = CurrentMachine.CurrMat.SubId.ToString() Then
+                  If Not IsNothing( CurrentMachine.CurrMat) AndAlso SubParam(0) = CurrentMachine.CurrMat.nId.ToString() AndAlso
+                     SubParam.Count > 1 AndAlso SubParam(1) = CurrentMachine.CurrMat.SubId.ToString() Then
                      Dim MatMinH As Double = 0
                      StringToDouble(Param(1), MatMinH)
                      Dim MatMaxH As Double = 0

DxfImportWindow/DxfImportWindowVM.vb

@@ -710,6 +710,8 @@ Public Class DxfImportWindowVM
          EgtErase(EgtGetFirstNameInGroup(PartId, SELECT_REGION_LAYER))
          PartId = EgtGetNextPart(PartId)
       End While
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As New List(Of String)
       ' Scrivo testi per nesting
       SideEntityControlVM.WriteSideAngleForNest(DxfImportWindowMap.refDxfImportSceneHostV.ImportDxfScene.GetCtx())
       ' Imposto riferimento sul centro geometrico di ogni pezzo
@@ -732,10 +734,33 @@ Public Class DxfImportWindowVM
       Dim bDirect As Boolean = (GetMainPrivateProfileInt(S_NEST, K_DIRECT, 0) <> 0)
       ' Elimino eventuali precedenti pezzi vuoti
       EgtEraseEmptyParts()
+      ' creo il riferimento
+      If m_PartNum > 1 Then
+         ' per ogni pezze del file DXF creo un gruppo
+         Dim nIdTemp As Integer = EgtGetFirstPart()
+         While nIdTemp <> GDB_ID.NULL
+            Dim sPreGuid As String = CreatePreGuidCode(nIdTemp)
+            sGUICode.Add(sPreGuid & System.Guid.NewGuid.ToString)
+            nIdTemp = EgtGetNextPart(nIdTemp)
+         End While
+      End If
       ' Inserisco i pezzi nell'ambiente principale e recupero Id primo pezzo inserito
       Dim nFirstId As Integer = EgtGetLastPart()
       For nInd As Integer = 1 To m_PartNum
+         Dim nFirst2Id As Integer = EgtGetLastPart()
          EgtInsertFile(sTmpFile)
+         Dim FirstOfImport As Integer = EgtGetNextPart(nFirst2Id)
+         Dim Index As Integer = 1
+         While FirstOfImport <> GDB_ID.NULL And Index <= sGUICode.Count
+            If Not String.IsNullOrEmpty(sGUICode(Index - 1)) Then
+               EgtSetInfo(FirstOfImport, INFO_REFGROUP, sGUICode(Index - 1))
+               Index += 1
+            Else
+               Exit While
+            End If
+            FirstOfImport = EgtGetNextPart(FirstOfImport)
+         End While
+         nFirst2Id = If(nFirst2Id <> GDB_ID.NULL, EgtGetNextPart(nFirst2Id), EgtGetFirstPart())
       Next
       nFirstId = If(nFirstId <> GDB_ID.NULL, EgtGetNextPart(nFirstId), EgtGetFirstPart())
       ' Cancello il file
@@ -909,6 +934,36 @@ Public Class DxfImportWindowVM
       NotifyPropertyChanged("MsgColor")
    End Sub
 
+   ' metodo utilizzato per definire il colore dei pezzi DXF importati
+   Private Sub ColorRegion(nCtx As Integer)
+
+      ' Leggo dati corrispondenza colore
+      Dim InsertColor As Color3d = CompoColor(IniFile.m_sIniFile)
+
+      ' Imposto contesto corrente
+      EgtSetCurrentContext(nCtx)
+      ' Ciclo sui pezzi
+      Dim PartId As Integer = EgtGetFirstPart()
+      While PartId <> GDB_ID.NULL
+         ' Ciclo sui layer delle regioni
+         Dim RegionId As Integer = EgtGetFirstNameInGroup(PartId, NAME_REGION)
+         While RegionId <> GDB_ID.NULL
+            EgtSetColor(RegionId, InsertColor)
+            ' Ciclo sulle regioni
+            Dim EntId As Integer = EgtGetFirstInGroup(RegionId)
+            While EntId <> GDB_ID.NULL
+               If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, InsertColor)
+               EntId = EgtGetNext(EntId)
+            End While
+            RegionId = EgtGetNextName(PartId, NAME_REGION)
+         End While
+         ' passo al pezzo successico
+         PartId = EgtGetNextPart(PartId)
+      End While
+      ' Aggiorno scritte per angoli sui lati
+      'WriteSideAngleForNest(nCtx)
+   End Sub
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -973,6 +1028,7 @@ Public Class DxfImportWindowVM
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, IniFile.m_sIniFile) <> 0 Then
          SideEntityControlVM.ColorToEngrave(DxfImportWindowMap.refDxfImportSceneHostV.ImportDxfScene.GetCtx())
       End If
+      ColorRegion(DxfImportWindowMap.refDxfImportSceneHostV.ImportDxfScene.GetCtx())
       ' Eseguo zoom
       EgtZoom(ZM.ALL)
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert
@@ -1013,6 +1069,7 @@ Public Class DxfImportWindowVM
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, IniFile.m_sIniFile) <> 0 Then
          SideEntityControlVM.ColorToEngrave(DxfImportWindowMap.refDxfImportSceneHostV.ImportDxfScene.GetCtx())
       End If
+      ColorRegion(DxfImportWindowMap.refDxfImportSceneHostV.ImportDxfScene.GetCtx())
       ' Eseguo zoom
       EgtZoom(ZM.ALL)
       ' disabilito bottoni UseLayer. UseRegion e UseClosedCurve, abilito bottoni Reset e Insert
@@ -1053,6 +1110,7 @@ Public Class DxfImportWindowVM
       If GetPrivateProfileInt(S_COLORTOENGRAVE, K_CTE_ENABLE, 0, IniFile.m_sIniFile) <> 0 Then
          SideEntityControlVM.ColorToEngrave(DxfImportWindowMap.refDxfImportSceneHostV.ImportDxfScene.GetCtx())
       End If
+      ColorRegion(DxfImportWindowMap.refDxfImportSceneHostV.ImportDxfScene.GetCtx())
       ' Eseguo zoom
       EgtZoom(ZM.ALL)
       ' disabilito bottoni UseLayer e UseRegion, abilito bottoni Reset e Insert

EgtStoneLib/CamAuto.vb

@@ -717,10 +717,12 @@ Friend Module CamAuto
 
 
    Private Function SetLuaStandardCamParams(Optional bDripOk As Boolean = True) As Boolean
+      Dim sMaterial As String = CurrentMachine.CurrMat.sName
       Dim sSawMch As String = CurrentMachine.sCurrSawing
       Dim sMillMch As String = CurrentMachine.sCurrMilling
       Dim sDrillMch As String = CurrentMachine.sCurrDrilling
       Dim sWaterJetMch As String = CurrentMachine.sCurrWaterJetting
+      Dim sWaterJetQual As String = CurrentMachine.sCurrWaterJettingQuality
       Dim sDripSawMch As String = If(bDripOk, CurrentMachine.sCurrDripSawing, "")
       Dim sDripDrillMch As String = If(bDripOk, CurrentMachine.sCurrDripDrilling, "")
       Dim dReducedDepth As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_REDUCEDDEPTH, 1, CurrentMachine.sMachIniFile)
@@ -732,10 +734,12 @@ Friend Module CamAuto
       Dim bMillingOnCorners As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_CORNERS, 1, CurrentMachine.sMachIniFile) <> 0)
       Dim bMillingOnSinks As Boolean = (GetPrivateProfileInt(S_MACH_NEST, K_MACH_MILLING_ON_SINKS, 0, CurrentMachine.sMachIniFile) <> 0)
       Dim dMillingShort As Double = GetPrivateProfileDouble(S_MACH_NEST, K_MACH_MILLING_SHORTENING, 0, CurrentMachine.sMachIniFile)
+      EgtLuaSetGlobStringVar("CAM.MATERIAL", sMaterial)
       EgtLuaSetGlobStringVar("CAM.SAWMCH", sSawMch)
       EgtLuaSetGlobStringVar("CAM.MILLMCH", sMillMch)
       EgtLuaSetGlobStringVar("CAM.DRILLMCH", sDrillMch)
       EgtLuaSetGlobStringVar("CAM.WATERJETMCH", sWaterJetMch)
+      EgtLuaSetGlobStringVar("CAM.WATERJETQLTY", sWaterJetQual)
       EgtLuaSetGlobStringVar("CAM.DRIPSAWMCH", sDripSawMch)
       EgtLuaSetGlobStringVar("CAM.DRIPDRILLMCH", sDripDrillMch)
       EgtLuaSetGlobNumVar("CAM.REDUCEDDEPTH", dReducedDepth)

EgtStoneLib/ConstMach.vb

@@ -33,6 +33,8 @@ Module ConstMach
    Public Const KEY_VACLAY_SEL As String = "Sel"
    ' Info in gruppo layout per angolo di rotazione preferito
    Public Const KEY_VACLAY_PREFROT As String = "PreferredRot"
+   Public Const KEY_VACLAY_PREFVROTXMINUS As String = "PrefVertRotXMinus"
+   Public Const KEY_VACLAY_PREFVROTXPLUS As String = "PrefVertRotXPlus"
    ' Info in gruppo layout per direzione di riferimento ventose per tagli da sotto
    Public Const KEY_VACLAY_DRIPREFDIR As String = "DripRefDir"
    ' Info in asse rotante ventosa per step discreti
@@ -91,6 +93,9 @@ Module ConstMach
    Public Const INFO_RAW_BLOCK = "Block"
    ' Info per numero lastra nel blocco
    Public Const INFO_RAW_SLABNBR = "SlabNbr"
+   ' Info per identificazione gruppo pezzi
+   Public Const INFO_REFGROUP As String = "RefGroup"
+   Public Const INFO_COUNTERLY As String = "CounterPz"
 
    ' Contrassegno di progetto OmagCut
    Public Const NAME_PROJMARK As String = "OmagCut"
@@ -280,6 +285,8 @@ Module ConstMach
    ' Nome di pezzo temporaneo che serve per copia dime
    Public Const NAME_COPYTEMPLATE As String = "CopyTemplate"
 
+   ' Nome layer solidi per VM
+   Public Const NAME_VM_SOLID As String = "Solid"
    ' Chiave per Id originale del pezzo per VeinMatch
    Public Const KEY_ORI_ID As String = "OriId"
 

EgtStoneLib/CsvM.vb

@@ -12,12 +12,19 @@ Module CsvM
          Return m_sCsvPath
       End Get
    End Property
+   Private m_sFilePath As String = String.Empty
+   Public ReadOnly Property FilePath As String
+      Get
+         Return m_sFilePath
+      End Get
+   End Property
    Private m_CsvPartList As New List(Of CsvPart)
    Public ReadOnly Property CsvPartList As List(Of CsvPart)
       Get
          Return m_CsvPartList
       End Get
    End Property
+
    Private m_bCsvPartListModified As Boolean = False
    Private m_sCompoDir As String = String.Empty
 
@@ -36,12 +43,7 @@ Module CsvM
 
    Public Sub NewCmd()
       ' Salvo lista dei pezzi attuale (se modificata)
-      If Not SaveCsvPartList() Then
-         ' Errore nel salvataggio del file CSV, vuoi continuare lo stesso ? - Errore
-         If MessageBox.Show(EgtMsg(MSG_CSVPAGEUC + 5), EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.YesNo, MessageBoxImage.Error) <> MessageBoxResult.Yes Then
-            Return
-         End If
-      End If
+      SaveCsvPartList()
       ' Pulisco path e lista dei pezzi Csv
       m_sCsvPath = String.Empty
       m_CsvPartList.Clear()
@@ -51,25 +53,33 @@ Module CsvM
    End Sub
 
    Public Sub Open()
-      ' Salvo lista dei pezzi attuale (se modificata)
-      If Not SaveCsvPartList() Then
-         ' Errore nel salvataggio del file CSV, vuoi continuare lo stesso ? - Errore
-         If MessageBox.Show(EgtMsg(MSG_CSVPAGEUC + 5), EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.YesNo, MessageBoxImage.Error) <> MessageBoxResult.Yes Then
-            Return
-         End If
-      End If
       ' Leggo direttorio corrente dei file CSV
       Dim sCurrDir As String = ""
       GetMainPrivateProfileString(S_CSV, K_CSVCURRDIR, "C:\", sCurrDir)
       ' Apro dialogo scelta file
       Dim CsvFileDlg As New Microsoft.Win32.OpenFileDialog()
       If Directory.Exists(sCurrDir) Then CsvFileDlg.InitialDirectory = sCurrDir
-      CsvFileDlg.Filter = "Csv file (*.csv;*.epl)|*.csv;*.epl"
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      Dim sFilterDialog As String = String.Empty
+      Dim sDeniedFiles As List(Of String) = CreateListOfDeniedFiles()
+      If bFull Then
+         sFilterDialog = "Csv file (*.csv;*.epl)|*.csv;*.epl;Merge.epl"
+      Else
+         sFilterDialog = "Csv file (*.csv)|*.csv"
+      End If
+      CsvFileDlg.Filter = sFilterDialog
+
       If Not CsvFileDlg.ShowDialog() Then Return
+
+      ' Salvo lista dei pezzi attuale
+      SaveCsvPartList()
+
       ' Salvo direttorio corrente
       WriteMainPrivateProfileString(S_CSV, K_CSVCURRDIR, Path.GetDirectoryName(CsvFileDlg.FileName))
       ' Apertura file
       Dim sPath = CsvFileDlg.FileName
+      ' se necessario cambio estensione del file
       If String.Compare(Path.GetExtension(sPath), ".CSV", True) = 0 Then
          LoadCsvFile(sPath)
       Else
@@ -77,6 +87,93 @@ Module CsvM
       End If
    End Sub
 
+   Private Function CreateListOfDeniedFiles() As List(Of String)
+      Dim LocalList As New List(Of String)
+      LocalList.Add("MERGE")
+      Dim Index1 As Integer = 0
+      Dim Index2 As Integer = 0
+      For Index1 = 0 To m_CsvPartList.Count - 1
+         Dim sFileName As String = m_CsvPartList(Index1).m_sPath
+         sFileName = Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim()
+         Dim bNewFile As Boolean = True
+         For Index2 = 0 To LocalList.Count - 1
+            If sFileName = LocalList(Index2) Then
+               bNewFile = False
+               Exit For
+            End If
+         Next
+         If bNewFile Then
+            LocalList.Add(Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim)
+         End If
+      Next
+      Return LocalList
+   End Function
+
+   Private Function LoadCsvFile(sCsvPath As String) As Boolean
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
+      ' Eseguo la lettura del file Csv
+      If Not ReadCsvFile(sCsvPath, LocalPartList) Then
+         'Errore nella lettura del file CSV
+         MessageBox.Show(EgtMsg(91206), "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         Return False
+      End If
+
+      ' Creo un nuovo file che ospitarà il merge de
+      Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+      m_sCsvPath = sNewMergeFile
+      m_sFilePath = m_sCsvPath
+
+      ' Elimino pezzi nulli
+      RemoveWrongParts(LocalPartList)
+      ' Aggiorno
+      If bFull Then
+         MySaveCsvPartList(LocalPartList)
+         ' Salvo come epl
+         SaveCsvPartList()
+         ' Rinomino file originale
+         Dim sBakPath As String = sCsvPath & ".bak"
+         Dim sBakName As String = Path.GetFileName(sBakPath)
+         ' cancello eventuale vecchio backup
+         If My.Computer.FileSystem.FileExists(sBakPath) Then
+            My.Computer.FileSystem.DeleteFile(sBakPath)
+         End If
+         ' eseguo rinomina
+         My.Computer.FileSystem.RenameFile(sCsvPath, sBakName)
+      End If
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
+      Return True
+   End Function
+
+   Private Sub LoadCsvPartList(sFile As String)
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      ' Se Csv semplificato non va letta
+      If Not bFull Then Return
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
+
+      ' Lettura del file
+      If ReadCsvPartList(sFile, LocalPartList) Then
+         ' Creo un nuovo file che ospitarà il merge de
+         Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+         m_sCsvPath = sNewMergeFile
+         m_sFilePath = m_sCsvPath
+      End If
+      ' Elimino pezzi nulli
+      RemoveWrongParts(LocalPartList)
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
+   End Sub
+
    Public Sub Insert()
       ' Recupero lo spessore della lastra corrente
       Dim dRawHeight As Double = EstCalc.GetRawHeight()
@@ -88,7 +185,7 @@ Module CsvM
       End If
       ' Recupero la tolleranza sullo spessore
       Dim dToler As Double = GetMainPrivateProfileDouble(S_CSV, K_THICKTOLERANCE, 100 * EPS_SMALL)
-      dToler = Math.Max( dToler, 100 * EPS_SMALL)
+      dToler = Math.Max(dToler, 100 * EPS_SMALL)
       ' Creo la lista dei pezzi inseribili nella lastra corrente
       Dim InsPartList As New List(Of CsvPart)
       For i As Integer = 1 To m_CsvPartList.Count()
@@ -174,25 +271,46 @@ Module CsvM
          If Not bMaxDimOnX Then
             Dim dH As Double = Math.Min(0.1 * dDimY, 30)
             Dim nText As Integer = EgtCreateTextAdv(nRegId, New Point3d(dDimX / 2, dDimY - 0.6 * dH, 0), 0, "*TOP*", "", 500, False, dH, 1, 0, INS_POS.MC)
-            EgtSetColor(nText, New Color3d( 0, 0, 0))
+            EgtSetColor(nText, New Color3d(0, 0, 0))
          End If
          ' Aggiusto per lavorazioni
          AdjustFlatPart(nId)
          ' Aggiungo info su CSV di origine
-         EgtSetInfo(nId, INFO_CSV_PATH, m_sCsvPath)
+         EgtSetInfo(nId, INFO_CSV_PATH, CurrPart.m_sPath)
          EgtSetInfo(nId, INFO_CSV_PART, CurrPart.m_sName)
          EgtSetInfo(nId, INFO_CSV_ORD, CurrPart.m_sOrd)
          EgtSetInfo(nId, INFO_CSV_DIST, CurrPart.m_sDist)
          EgtSetInfo(nId, INFO_CSV_MAT, CurrPart.m_sMaterial)
          ' Imposto colore testi
-         EstCalc.SetTextColor( nRegId)
+         EstCalc.SetTextColor(nRegId)
          ' Lo sposto nel gruppo speciale
          EgtRelocate(nId, nIpGrp)
+
+         ' assegno l'identificatico del pezzo, se esiste
+         If Not String.IsNullOrEmpty(CurrPart.m_sRefGuid) Then
+            ' GuidCode dovrebbe contenere 36 caratteri, il precode 5: tot = 41
+            If CurrPart.m_sRefGuid.Count <= 36 Then
+               Dim sPreGuid As String = CreatePreGuidCode(CurrPart.m_nId)
+               CurrPart.m_sRefGuid = sPreGuid & CurrPart.m_sRefGuid
+            End If
+            EgtSetInfo(CurrPart.m_nId, INFO_REFGROUP, CurrPart.m_sRefGuid)
+         End If
+         Dim nRegLayId As Integer = EgtGetFirstNameInGroup(CurrPart.m_nId, NAME_REGION)
+         ' Imposto il colore del pezzo inserito nel progetto
+         EgtSetColor(nRegLayId, CurrPart.m_cColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, CurrPart.m_cColor)
+            EntId = EgtGetNext(EntId)
+         End While
+
       Next
       EgtLuaResetGlobVar("CMP")
       EgtLuaResetGlobVar("CMP_Draw")
       ' Provo ad inserire i pezzi
-      Dim bDirect As Boolean = (GetMainPrivateProfileInt(S_CSV, K_CSVDIRECT, 1) <> 0)
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      Dim bDirect As Boolean = bFull And (GetMainPrivateProfileInt(S_CSV, K_CSVDIRECT, 1) <> 0)
       For i As Integer = 1 To InsPartList.Count()
          Dim CurrPart As CsvPart = InsPartList(i - 1)
          While CurrPart.m_nToNest > 0
@@ -229,7 +347,7 @@ Module CsvM
             EgtErase(nId2)
             Return False
          End If
-      ' altrimenti lo metto in parcheggio
+         ' altrimenti lo metto in parcheggio
       Else
          ' Aggiungo riferimento e lo inserisco in VeinMatching
          VeinMatching.SetRefOnPart(nId2)
@@ -270,11 +388,11 @@ Module CsvM
       Dim sName As String = String.Empty
       EgtGetInfo(nId, INFO_CSV_PART, sName)
       ' Verifico che il pezzo appartenga a questo Csv
-      If String.Compare(sCsvPath, m_sCsvPath, True) = 0 Then
+      If SearchCurrCSV(sCsvPath) Then
          ' Cerco il pezzo nella lista dei pezzi
          For i = 1 To m_CsvPartList.Count()
             Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
-            If String.Compare(sName, CurrPart.m_sName, True) = 0 Then
+            If String.Compare(sName, CurrPart.m_sName, True) = 0 And String.Compare(sCsvPath, CurrPart.m_sPath, True) = 0 Then
                ' Se era nel grezzo
                If EgtGetParent(nId) = EstCalc.GetRawId() Then
                   ' Rimuovo le lavorazioni
@@ -282,12 +400,19 @@ Module CsvM
                   ' Rimuovo dal grezzo
                   EgtRemovePartFromRawPart(nId)
                End If
+               ' recupero il Guid del pezzo corrente (potrebbe essere stato modificato a causa di rotazioni quando il pezzo è passato in parcheggio)
+               Dim sCurrRefGuid As String = String.Empty
+               EgtGetInfo(nId, INFO_REFGROUP, sCurrRefGuid)
                ' Eventuale cancellazione per VM
                VeinMatching.OnRemovePart(nId)
                ' Cancello il pezzo
                EgtErase(nId)
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio (se sRefGroup<>"")
+               EstCalc.CountPartInFamily(sCurrRefGuid)
                ' Aggiorno il contatore
                CurrPart.m_nToNest += 1
+               ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+               GetFamilyGroupInPark()
                ' Esco
                Return True
             End If
@@ -297,10 +422,19 @@ Module CsvM
       Return False
    End Function
 
-   Private Function LoadCsvFile(sCsvPath As String) As Boolean
+   Private Function SearchCurrCSV(ByVal sCSVFile As String) As Boolean
+      For i As Integer = 1 To m_CsvPartList.Count()
+         Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
+         If String.Compare(sCSVFile, CurrPart.m_sPath, True) = 0 Then
+            Return True
+         End If
+      Next
+      Return False
+   End Function
+
+   Private Function ReadCsvFile(sCsvPath As String, ByRef LocalCsvPartList As List(Of CsvPart)) As Boolean
       ' Pulisco path e lista dei pezzi Csv
       m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
       ' Definizione variabili
       EgtLuaCreateGlobTable("CSV")
       EgtLuaSetGlobStringVar("CSV.FILE", sCsvPath)
@@ -308,7 +442,10 @@ Module CsvM
       Dim nErr As Integer = 999
       Dim sReader As String = String.Empty
       GetMainPrivateProfileString(S_CSV, K_READER, "CsvRead.lua", sReader)
-      If EgtLuaExecFile(OmagOFFICEMap.refMainWindowVM.MainWindowM.sCsvAutoDir & "\" & sReader) AndAlso
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      Dim sLuaScript As String = OmagOFFICEMap.refMainWindowVM.MainWindowM.sCsvAutoDir & If(bFull, "\" & sReader, "\CsvSimplRead.lua")
+      If EgtLuaExecFile(sLuaScript) AndAlso
          EgtLuaCallFunction("CSV.Read") Then
          ' Verifica stato di errore
          EgtLuaGetGlobIntVar("CSV.ERR", nErr)
@@ -325,6 +462,7 @@ Module CsvM
       For i As Integer = 1 To nNbr
          Dim OnePart As New CsvPart
          Dim sN As String = i.ToString()
+         OnePart.m_sPath = sCsvPath
          EgtLuaGetGlobStringVar("CSV.NAME" & sN, OnePart.m_sName)
          OnePart.m_bActive = True
          EgtLuaGetGlobStringVar("CSV.ORD" & sN, OnePart.m_sOrd)
@@ -336,63 +474,50 @@ Module CsvM
          EgtLuaGetGlobNumVar("CSV.DIMX" & sN, OnePart.m_dDimX)
          EgtLuaGetGlobNumVar("CSV.DIMY" & sN, OnePart.m_dDimY)
          EgtLuaGetGlobNumVar("CSV.TH" & sN, OnePart.m_dTh)
+         EgtLuaGetGlobNumVar("CSV.A1_" & sN, OnePart.m_dAng1)
+         EgtLuaGetGlobNumVar("CSV.H1_" & sN, OnePart.m_dHeel1)
+         EgtLuaGetGlobNumVar("CSV.A2_" & sN, OnePart.m_dAng2)
+         EgtLuaGetGlobNumVar("CSV.H2_" & sN, OnePart.m_dHeel2)
+         EgtLuaGetGlobNumVar("CSV.A3_" & sN, OnePart.m_dAng3)
+         EgtLuaGetGlobNumVar("CSV.H3_" & sN, OnePart.m_dHeel3)
+         EgtLuaGetGlobNumVar("CSV.A4_" & sN, OnePart.m_dAng4)
+         EgtLuaGetGlobNumVar("CSV.H4_" & sN, OnePart.m_dHeel4)
          OnePart.m_nOriInd = i
+         If OnePart.m_nCount > 1 Then
+            OnePart.m_sRefGuid = System.Guid.NewGuid.ToString
+         End If
          ' inserisco in lista
-         m_CsvPartList.Add(OnePart)
+         LocalCsvPartList.Add(OnePart)
       Next
       EgtLuaResetGlobVar("CSV")
       ' Ordinamento lista dei pezzi (ordine crescente su materiale e spessore)
-      m_CsvPartList.Sort(Function(x, y)
-                            Dim nComp As Integer = String.Compare(x.m_sMaterial, y.m_sMaterial, True)
-                            If nComp = 0 Then
-                               If Math.Abs(x.m_dTh - y.m_dTh) < EPS_SMALL Then
-                                  Return (x.m_nOriInd - y.m_nOriInd)
+      LocalCsvPartList.Sort(Function(x, y)
+                               Dim nComp As Integer = String.Compare(x.m_sMaterial, y.m_sMaterial, True)
+                               If nComp = 0 Then
+                                  If Math.Abs(x.m_dTh - y.m_dTh) < EPS_SMALL Then
+                                     Return (x.m_nOriInd - y.m_nOriInd)
+                                  Else
+                                     Return CInt(Math.Ceiling(x.m_dTh - y.m_dTh))
+                                  End If
                                Else
-                                  Return CInt(Math.Ceiling(x.m_dTh - y.m_dTh))
+                                  Return nComp
                                End If
-                            Else
-                               Return nComp
-                            End If
-                         End Function)
-      ' Salvo come epl
-      m_bCsvPartListModified = True
-      SaveCsvPartList()
-      ' Rinomino file originale
-      Dim sBakPath As String = sCsvPath & ".bak"
-      Dim sBakName As String = Path.GetFileName(sBakPath)
-      ' cancello eventuale vecchio backup
-      If My.Computer.FileSystem.FileExists(sBakPath) Then
-         My.Computer.FileSystem.DeleteFile(sBakPath)
-      End If
-      ' eseguo rinomina
-      My.Computer.FileSystem.RenameFile(sCsvPath, sBakName)
+                            End Function)
       Return True
    End Function
 
-   Public Function SaveCsvPartList() As Boolean
-      ' Se non c'è nulla di attivo, non faccio alcunché
-      If String.IsNullOrEmpty(m_sCsvPath) Then
-         EgtOutLog("CSV List Save Skipped : missing")
-         Return True
-      End If
-      ' Se lista non modificata, non faccio alcunchhé
-      If Not m_bCsvPartListModified Then
-         EgtOutLog("CSV List Save Skipped : not modified")
-         Return True
-      End If
-      ' Path del file
-      Dim sFile As String = Path.ChangeExtension(m_sCsvPath, ".epl")
-      ' Gestione file
+   Public Function WriteCsvPartList(sFile As String, sCsvPath As String, LocalCsvPartList As List(Of CsvPart)) As Boolean
       Try
          ' Apro file
          Dim Writer As New IO.StreamWriter(sFile, False)
          ' Intestazione
          Writer.WriteLine("[General]")
-         Writer.WriteLine("Path=" & m_sCsvPath)
+         Writer.WriteLine("Path=" & sCsvPath)
          ' Ciclo sui pezzi
-         For i As Integer = 1 To m_CsvPartList.Count()
-            Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
+         For i As Integer = 1 To LocalCsvPartList.Count()
+            Dim CurrPart As CsvPart = LocalCsvPartList(i - 1)
             Writer.WriteLine("[P" & i.ToString() & "]")
+            Writer.WriteLine("Path=" & CurrPart.m_sPath)
             Writer.WriteLine("Nam=" & CurrPart.m_sName)
             Writer.WriteLine("Ord=" & CurrPart.m_sOrd)
             Writer.WriteLine("Dist=" & CurrPart.m_sDist)
@@ -405,7 +530,16 @@ Module CsvM
             Writer.WriteLine("DX=" & DoubleToString(CurrPart.m_dDimX, 4))
             Writer.WriteLine("DY=" & DoubleToString(CurrPart.m_dDimY, 4))
             Writer.WriteLine("Th=" & DoubleToString(CurrPart.m_dTh, 4))
+            Writer.WriteLine("A1=" & DoubleToString(CurrPart.m_dAng1, 4))
+            Writer.WriteLine("H1=" & DoubleToString(CurrPart.m_dHeel1, 4))
+            Writer.WriteLine("A2=" & DoubleToString(CurrPart.m_dAng2, 4))
+            Writer.WriteLine("H2=" & DoubleToString(CurrPart.m_dHeel2, 4))
+            Writer.WriteLine("A3=" & DoubleToString(CurrPart.m_dAng3, 4))
+            Writer.WriteLine("H3=" & DoubleToString(CurrPart.m_dHeel3, 4))
+            Writer.WriteLine("A4=" & DoubleToString(CurrPart.m_dAng4, 4))
+            Writer.WriteLine("H4=" & DoubleToString(CurrPart.m_dHeel4, 4))
             Writer.WriteLine("OIn=" & CurrPart.m_nOriInd.ToString())
+            Writer.WriteLine("Guid=" & CurrPart.m_sRefGuid)
          Next
          ' Terminatore
          Writer.WriteLine("[END]")
@@ -416,18 +550,80 @@ Module CsvM
          ' Registro in ini path
          WriteMainPrivateProfileString(S_CSV, K_CSVLASTFILE, sFile)
          Return True
-      ' Errore
+         ' Errore
       Catch ex As Exception
          EgtOutLog("CSV List error writing " & sFile)
          Return False
       End Try
    End Function
 
-   Private Function LoadCsvPartList(sFile As String) As Boolean
-      ' Pulisco path e lista dei pezzi Csv
-      m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
-      ' Gestione file
+   ' dato l'elenco completo dei file salvo ogni singolo epl 
+   Friend Function WriteCsvMergePartList(CsvPartList As List(Of CsvPart)) As Boolean
+      Dim bOk As Boolean = True
+      Dim LocalPartList As New List(Of CsvPart)
+      Dim Index As Integer = 0
+      ' devo dividere la lista in tante parti quanti sono i file che lo costituiscono
+      While Index < CsvPartList.Count
+         Dim CurrFile As String = CsvPartList(Index).m_sPath
+         Dim sFile As String = Path.ChangeExtension(CurrFile, ".epl")
+         LocalPartList.Clear()
+         While CurrFile = CsvPartList(Index).m_sPath
+            LocalPartList.Add(CsvPartList(Index))
+            Index += 1
+            ' se terminata la lista
+            If Index = CsvPartList.Count Then
+               Exit While
+            End If
+         End While
+         ' salvo l'elenco corrente
+         bOk = WriteCsvPartList(sFile, CurrFile, LocalPartList) And bOk
+      End While
+      Return bOk
+   End Function
+
+   Friend Sub SaveCsvPartList()
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      ' Se Csv semplificato non va salvata
+      If Not bFull Then Return
+      ' Se non c'è nulla di attivo, non faccio alcunché
+      If String.IsNullOrEmpty(m_sCsvPath) Then
+         EgtOutLog("CSV List missing")
+         Return
+      End If
+      ' Path del file
+      Dim sFile As String = Path.ChangeExtension(m_sFilePath, ".epl")
+      ' Scrittura dei file
+      If WriteCsvMergePartList(m_CsvPartList) Then
+         ' Scrittura dei file Merge
+         If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
+            WriteMainPrivateProfileString(S_CSV, K_CSVLASTFILE, sFile)
+         End If
+      End If
+   End Sub
+
+   Friend Sub MySaveCsvPartList(ByVal CurrPartList As List(Of CsvPart))
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      ' Se Csv semplificato non va salvata
+      If Not bFull Then Return
+      Dim sCurrPath As String = String.Empty
+      ' recupero dalla lista il nome del file corrente
+      For Each Item As CsvPart In CurrPartList
+         sCurrPath = Item.m_sPath
+      Next
+      ' se non trov il nome del file assocciato all'elenco di pezzi esco
+      If String.IsNullOrEmpty(sCurrPath) Then
+         EgtOutLog("CSV Curr list missing")
+         Return
+      End If
+      ' Path del file
+      Dim sFile As String = Path.ChangeExtension(sCurrPath, ".epl")
+      ' Scrittura del file
+      WriteCsvPartList(sFile, sCurrPath, CurrPartList)
+   End Sub
+
+   Private Function ReadCsvPartList(sFile As String, LocalCsvPartList As List(Of CsvPart)) As Boolean
       Try
          ' Apro file
          Dim Reader As New IO.StreamReader(sFile, False)
@@ -456,7 +652,7 @@ Module CsvM
                ' se esiste pezzo precedente, lo salvo
                If nI > 1 Then
                   ' inserisco in lista
-                  m_CsvPartList.Add(OnePart)
+                  LocalCsvPartList.Add(OnePart)
                End If
                ' predisposizioni per prossimo pezzo
                nI += 1
@@ -466,7 +662,9 @@ Module CsvM
             Else
                Dim sItems() As String = sLine.Split("=".ToCharArray)
                If sItems.Count() >= 2 Then
-                  If sItems(0) = "Nam" Then
+                  If sItems(0) = "Path" Then
+                     OnePart.m_sPath = sItems(1)
+                  ElseIf sItems(0) = "Nam" Then
                      OnePart.m_sName = sItems(1)
                   ElseIf sItems(0) = "Ord" Then
                      OnePart.m_sOrd = sItems(1)
@@ -490,8 +688,26 @@ Module CsvM
                      StringToDouble(sItems(1), OnePart.m_dDimY)
                   ElseIf sItems(0) = "Th" Then
                      StringToDouble(sItems(1), OnePart.m_dTh)
+                  ElseIf sItems(0) = "A1" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng1)
+                  ElseIf sItems(0) = "H1" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel1)
+                  ElseIf sItems(0) = "A2" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng2)
+                  ElseIf sItems(0) = "H2" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel2)
+                  ElseIf sItems(0) = "A3" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng3)
+                  ElseIf sItems(0) = "H3" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel3)
+                  ElseIf sItems(0) = "A4" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng4)
+                  ElseIf sItems(0) = "H4" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel4)
                   ElseIf sItems(0) = "OIn" Then
                      StringToInt(sItems(1), OnePart.m_nOriInd)
+                  ElseIf sItems(0) = "Guid" Then
+                     OnePart.m_sRefGuid = sItems(1).Trim
                   End If
                End If
             End If
@@ -502,18 +718,37 @@ Module CsvM
          ' Dichiaro lista non modificata
          m_bCsvPartListModified = False
          Return True
-      ' Errore
+         ' Errore
       Catch ex As Exception
          EgtOutLog("Error reading " & sFile)
          Return False
       End Try
    End Function
 
+   Friend Function RemoveNotToNestParts(ByRef CsvPartList As List(Of CsvPart)) As Boolean
+      For i As Integer = CsvPartList.Count() - 1 To 0 Step -1
+         If CsvPartList(i).m_nToNest = 0 Then
+            CsvPartList.RemoveAt(i)
+         End If
+      Next
+      Return True
+   End Function
+
+   Friend Function RemoveWrongParts(ByRef CsvPartList As List(Of CsvPart)) As Boolean
+      For i As Integer = CsvPartList.Count() - 1 To 0 Step -1
+         If Not CsvPartList(i).m_bIsRect Or CsvPartList(i).m_dDimX < EPS_SMALL Or CsvPartList(i).m_dDimY < EPS_SMALL Then
+            CsvPartList.RemoveAt(i)
+         End If
+      Next
+      Return True
+   End Function
+
 #End Region    ' METHODS
 
 End Module
 
 Public Class CsvPart
+   Public m_sPath As String = String.Empty
    Public m_sName As String = String.Empty
    Public m_sOrd As String = String.Empty
    Public m_sDist As String = String.Empty
@@ -526,6 +761,18 @@ Public Class CsvPart
    Public m_dDimX As Double = 0
    Public m_dDimY As Double = 0
    Public m_dTh As Double = 0
+   Public m_dAng1 As Double = 0
+   Public m_dHeel1 As Double = 0
+   Public m_dAng2 As Double = 0
+   Public m_dHeel2 As Double = 0
+   Public m_dAng3 As Double = 0
+   Public m_dHeel3 As Double = 0
+   Public m_dAng4 As Double = 0
+   Public m_dHeel4 As Double = 0
    Public m_nOriInd As Integer = 0
    Public m_nId As Integer = GDB_ID.NULL
+   ' definsco il riferimento al gruppo
+   Public m_sRefGuid As String = System.Guid.NewGuid.ToString
+   ' definisco il colore del gruppo che sto inserendo
+   Public m_cColor As Color3d = CompoColor(IniFile.m_sIniFile)
 End Class

EgtStoneLib/CurrentMachine.vb

@@ -1424,7 +1424,6 @@ Friend Property sCurrMillNoTip As String
       Dim sFilePath As String = sMachDir & EgtWPFLib5.WaterjetDbWindowVM.WATERJETDB_PATH
       WjMaterialList = EgtWPFLib5.WaterjetDbWindowVM.LoadWjMaterials(sFilePath)
       ' definisco la lista delle qualità
-      m_Qualities.Add("")
       m_Qualities.Add("Q1")
       m_Qualities.Add("Q2")
       m_Qualities.Add("Q3")

EgtStoneLib/EstCalc.vb

@@ -3,6 +3,16 @@ Imports EgtUILib
 Imports EgtWPFLib5
 
 Module EstCalc
+   Friend Function CompoColor(sIniFile As String) As Color3d
+      Dim InsertColor As New Color3d(89, 210, 210, 25)
+      Dim IndexColor As Integer = GetPrivateProfileInt(S_COMPO, K_LASTCOLOR, 1, sIniFile)
+      If Not GetPrivateProfileColor(S_COMPO, K_COLOR & IndexColor.ToString, InsertColor, sIniFile) Then
+         IndexColor = 1
+         GetPrivateProfileColor(S_COMPO, K_COLOR & IndexColor.ToString, InsertColor, sIniFile)
+      End If
+      WritePrivateProfileString(S_COMPO, K_LASTCOLOR, (IndexColor + 1).ToString, sIniFile)
+      Return InsertColor
+   End Function
 
    '--------------------------------------------------------------------------------------------------
    Friend Function DoubleToString(ByVal dVal As Double, ByVal nNumDec As Integer) As String
@@ -41,6 +51,68 @@ Module EstCalc
       End If
    End Function
 
+#Region "PreGuidCode"
+
+   ' recupero i primi 5 caratteri della stringa
+   Friend Function GetPreGuidCode(sGuidCode As String) As String
+      If sGuidCode.Count > 5 Then
+         Return sGuidCode(0) & sGuidCode(1) & sGuidCode(2) & sGuidCode(3) & sGuidCode(4)
+      End If
+      Return String.Empty
+   End Function
+
+   ' sostituisce i primi 5 caratteri della stringa con qualle passata
+   Friend Function UppDateGuidCode(ByRef sGuidCode As String, sPreGuidCode As String) As Boolean
+      If sPreGuidCode.Count = 5 Then
+         sGuidCode = sGuidCode.Remove(0, 5)
+         sGuidCode = sPreGuidCode & sGuidCode
+         Return True
+      End If
+      Return False
+   End Function
+
+   ' restituisce 5 caratteri 
+   Friend Function CreatePreGuidCode(nId As Integer) As String
+      ' recupero il frame dell'oggetto
+      Dim frGlobFrame As New Frame3d
+      If Not EgtGetGroupGlobFrame(nId, frGlobFrame) Then
+         Return String.Empty
+      End If
+      ' recupero il suo versore
+      Dim vtX As Vector3d = frGlobFrame.VersX
+      Dim Len As Double
+      Dim AngV As Double
+      Dim AngH As Double
+      vtX.ToSpherical(Len, AngV, AngH)
+      ' costruisco il codice (6 caratteri!) che identifica la posizione del pezzo in parcheggio
+      Dim sPreGuid As String = GetDirectionCode(AngH)
+      Return sPreGuid
+   End Function
+
+   Friend Function GetDirectionCode(dVal As Double) As String
+      Dim bIsNegative As Boolean = False
+      If dVal < 0 Then
+         dVal = dVal + (-1)
+         bIsNegative = True
+      End If
+      Dim sVal As String = DoubleToString(dVal * 1000, 0)
+      Dim nCount As Integer = sVal.Count
+      For Index As Integer = 1 To 4 - nCount
+         sVal = "0" & sVal
+      Next
+      Dim vVal As Char() = {"+"c, "1"c, "0"c, "0"c, "0"c}
+      If bIsNegative Then
+         vVal = {"-"c, sVal(0), sVal(1), sVal(2), sVal(3)}
+      Else
+         vVal = {"+"c, sVal(0), sVal(1), sVal(2), sVal(3)}
+      End If
+      ' ricostruisco la stringa dotata di segno
+      sVal = vVal(0) & vVal(1) & vVal(2) & vVal(3) & vVal(4)
+      Return sVal
+   End Function
+
+#End Region    ' PreGiudCode
+
    '--------------------------------------------------------------------------------------------------
    Private m_nRawId As Integer = GDB_ID.NULL
    Public Function GetRawId() As Integer
@@ -67,6 +139,8 @@ Module EstCalc
    End Function
 
    Public Function UpdateRawPart() As Boolean
+      ' Passo al contesto principale
+      EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
       ' determino il grezzo (è il primo con fase 1)
       m_nRawId = CamAuto.GetCurrentRaw()
       If Not EgtGetRawPartBBox(m_nRawId, m_b3Raw) Then
@@ -614,6 +688,16 @@ Module EstCalc
       End If
       ' Gestione risultato nesting
       If bFit Then
+         '---------------------- COUNTER PART ----------------------
+         Dim sRefGroup As String = String.Empty
+         If EgtGetInfo(nId, INFO_REFGROUP, sRefGroup) Then
+            ' spengo il layer che contiene il contatore
+            Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nId, INFO_COUNTERLY)
+            EgtSetStatus(nCounterLayer, GDB_ST.OFF)
+            ' aggiorno il layer che indica il numero di pezzi in parcheggio
+            CountPartInFamily(sRefGroup)
+         End If
+         '---------------------- COUNTER PART ----------------------
          ' Eventuale aggiunta solido per taglio da sotto
          UpdateSolidForDrip(nId)
          Return True
@@ -690,12 +774,198 @@ Module EstCalc
       Return True
    End Function
 
+#Region "Manager Counter Part"
+
+   ' lista delle famiglie di pezzi in parcheggio
+   Public m_ListOfGroupInPark As New List(Of FamilyPart)
+   ' se seleniozato il layer CounterPz
+   Public m_bIsCounterLy As Boolean = False
+   Public m_nCurrNubrOfParts As Integer = 0
+
+   ' creo la lista delle famiglie che popolano il parcheggio
+   Public Sub GetFamilyGroupInPark()
+      m_ListOfGroupInPark.Clear()
+      Dim nIdInPark As Integer = EgtGetFirstPart()
+      While nIdInPark <> GDB_ID.NULL
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         If EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup) Then
+            Dim bExists As Boolean = False
+            For Each sItem As FamilyPart In m_ListOfGroupInPark
+               If sRefGroup = sItem.sRefGuid Then
+                  bExists = True
+                  Exit For
+               End If
+            Next
+            If Not bExists Then
+               m_ListOfGroupInPark.Add(New FamilyPart(sRefGroup, nIdInPark))
+            End If
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+   End Sub
+
+   Public Sub CountPartInFamily(sRefGuid As String)
+      If String.IsNullOrEmpty(sRefGuid) Then Return
+      Dim nCount As Integer = 0
+      Dim nIdInPark As Integer = EgtGetFirstPart()
+      ' conto il nuero di pezzi del gruppo inidcato
+      While nIdInPark <> GDB_ID.NULL
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup)
+         If sRefGroup = sRefGuid Then
+            nCount += 1
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+      ' aggiorno il contatore dei pezzi del gruppo
+      nIdInPark = EgtGetFirstPart()
+      While nIdInPark <> GDB_ID.NULL
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup)
+         If sRefGroup = sRefGuid Then
+            Dim nId As Integer = EgtGetFirstNameInGroup(nIdInPark, INFO_COUNTERLY)
+            If nId <> GDB_ID.NULL Then
+               Dim m_IdCounterTextas As Integer = EgtGetFirstInGroup(nId)
+               EgtModifyText(m_IdCounterTextas, "# " & nCount.ToString)
+            End If
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+   End Sub
+
+   Public Sub SelectPartInFaimily(sRefGuid As String, nNbrOfSelection As Integer)
+      ' aggiorno il contatore dei pezzi del gruppo
+      Dim nIdInPark As Integer = EgtGetFirstPart()
+      Dim nCounter As Integer = 0
+      While nIdInPark <> GDB_ID.NULL And nCounter < nNbrOfSelection
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup)
+         If sRefGroup = sRefGuid Then
+            EgtSelectObj(nIdInPark)
+            nCounter += 1
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+   End Sub
+
+   Public Sub DeselectPartInFaimily(sRefGuid As String)
+      ' aggiorno il contatore dei pezzi del gruppo
+      Dim nIdInPark As Integer = EgtGetFirstPart()
+      While nIdInPark <> GDB_ID.NULL
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup)
+         If sRefGroup = sRefGuid Then
+            EgtDeselectObj(nIdInPark)
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+   End Sub
+
+   Public Function ParkInGroupFamily(nId As Integer) As Boolean
+      ' se pezzo appartenente ad un gruppo
+      Dim sRefGroup As String = String.Empty
+      Dim Element As FamilyPart
+      If EgtGetInfo(nId, INFO_REFGROUP, sRefGroup) Then
+         ' verifico se esiste un pezzo dello stesso gruppo in parcheggio
+         Dim nNewLayer As Integer
+         Dim ptMin As Point3d
+         Dim ptMax As Point3d
+         For Each sItem As FamilyPart In m_ListOfGroupInPark
+            If sRefGroup = sItem.sRefGuid Then
+               ' creo un nuovo layer per contenere l'informazione del numero di pezzi da inserire
+               If EgtGetFirstNameInGroup(nId, INFO_COUNTERLY) = GDB_ID.NULL Then
+                  nNewLayer = EgtCreateGroup(nId)
+                  EgtSetName(nNewLayer, INFO_COUNTERLY)
+                  EgtSetColor(nNewLayer, New Color3d(0, 0, 0))
+                  EgtGetBBox(nId, GDB_BB.STANDARD, ptMin, ptMax)
+                  EgtCreateText(nNewLayer, New Point3d((ptMin.x + ptMax.x) / 2, ptMin.y - sItem.nHText - 20, ptMin.z), "# ???", sItem.nHText, GDB_RT.LOC)
+               Else
+                  ' Accendo il layer che contiene il contatore
+                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nId, INFO_COUNTERLY)
+                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
+               End If
+
+               ' calcolo lo spostamento del pezzo
+               Dim PtMinInRaw As Point3d
+               Dim PtMaxInRaw As Point3d
+               EgtGetBBoxGlob(nId, GDB_BB.STANDARD, PtMinInRaw, PtMaxInRaw)
+               Dim vtMoveToStorage As New Vector3d
+               vtMoveToStorage = sItem.PtStorage() - PtMinInRaw
+               EgtMove(nId, vtMoveToStorage, GDB_RT.GLOB)
+
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio
+               CountPartInFamily(sRefGroup)
+               Return True
+            End If
+         Next
+         ' inserisco il primo pezzo del gruppo nel parcheggio
+         Element = New FamilyPart(sRefGroup, nId)
+         m_ListOfGroupInPark.Add(Element)
+         ' creo un nuovo layer per contenere l'informazione del numero di pezzi da inserire
+         If EgtGetFirstNameInGroup(nId, INFO_COUNTERLY) = GDB_ID.NULL Then
+            nNewLayer = EgtCreateGroup(nId)
+            EgtSetName(nNewLayer, INFO_COUNTERLY)
+            EgtSetColor(nNewLayer, New Color3d(0, 0, 0))
+            EgtGetBBox(nId, GDB_BB.STANDARD, ptMin, ptMax)
+            ' posso migliorarei lposizioanamento in funzione della dimensione della scritta...
+            EgtCreateText(nNewLayer, New Point3d((ptMin.x + ptMax.x) / 2, ptMin.y - Element.nHText - 20, ptMin.z), "# 1", Element.nHText, GDB_RT.LOC)
+         Else
+            ' Accendo il layer che contiene il contatore
+            Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nId, INFO_COUNTERLY)
+            EgtSetStatus(nCounterLayer, GDB_ST.ON_)
+            ' aggiorno il layer che indica il numero di pezzi in parcheggio
+            CountPartInFamily(sRefGroup)
+         End If
+      End If
+      Return False
+   End Function
+
+   ' verifico se il pezzo ha un gruppo che contiene le informazioni per il taglio
+   Public Function IsInRaw(nIdGroup As Integer) As Boolean
+      ' verifico che il pezzo sia veramente uin parcheggio
+      Dim nPV As Integer = EgtGetFirstNameInGroup(nIdGroup, "PV")
+      If nPV <> GDB_ID.NULL Then
+         ' verifico che non ci siano delle lavorazioni
+         If EgtGetFirstInGroup(nPV) <> GDB_ID.NULL Then
+            Return True
+         End If
+      End If
+      Return False
+   End Function
+#End Region    ' Manager Counter Part
+
    Public Function StoreOnePart(ByVal nId As Integer, Optional ByVal bForced As Boolean = False) As Boolean
       ' Se pezzo in grezzo, metto in parcheggio (sempre possibile)
       If bForced OrElse
          (m_nRawId <> GDB_ID.NULL AndAlso EgtGetParent(nId) = m_nRawId) Then
          ' Ripristino lo stato originale
-         PreRemoveOnePart( nId)
+         PreRemoveOnePart(nId)
+
+         '---------------------- COUNTER PART ----------------------
+         ' se esiste almento un pezzo del gruppo in parcheggio esco
+         If ParkInGroupFamily(nId) Then Return True
+         '---------------------- COUNTER PART ----------------------
+
          ' Parcheggio
          PackPartInStore(nId)
          ' Aggiusto la posizione in Z
@@ -718,7 +988,8 @@ Module EstCalc
       ' Parcheggio
       Const STORE_LARGH As Double = 6000
       Const STORE_DIST As Double = 200
-      Const STORE_OFFS As Double = 20
+      ' 40 il Font usato per indicare il numero di pezzi in parcheggio "# N"
+      Const STORE_OFFS As Double = 20 + 40 + 20
       Dim dStXmin As Double = b3Tab.Min().x - 0.5 * (STORE_LARGH - b3Tab.DimX())
       Return EgtPackBox(nId, dStXmin, -INFINITO, dStXmin + STORE_LARGH, b3Tab.Min().y - STORE_DIST, STORE_OFFS, False)
    End Function
@@ -819,3 +1090,4 @@ Module EstCalc
    End Function
 
 End Module
+

EgtStoneLib/SplitAuto.vb

@@ -747,35 +747,55 @@ Public Module SplitAuto
    End Function
 
    Private Function SafeMoveRawPart(nRawId As Integer, ByRef vtMove As Vector3d, dMindist As Double) As Boolean
+      ' Spostamento originale
+      Dim vtOriMove As New Vector3d(vtMove)
+      ' Livello di movimento
+      Dim nMoveLevel As Integer = GetPrivateProfileInt(S_SPLIT, K_MOVE_LEV, 5, IniFile.m_sIniFile)
+      Dim nMove As Integer = 1
       ' Se esce dalla tavola, movimento già annullato ed esco con errore
-      If Not EgtMoveRawPart(nRawId, vtMove) Then Return False
+      If Not EgtMoveRawPart(nRawId, vtOriMove) Then Return False
       ' Se interferisce con altri grezzi, annullo movimento ed esco con errore
       If Not VerifyRawWithOtherRaws(nRawId, dMindist) Then
-         EgtMoveRawPart(nRawId, -vtMove)
+         EgtMoveRawPart(nRawId, -vtOriMove)
          Return False
       End If
+      If nMoveLevel < 2 Then Return True
       ' Provo ad aggiungere un altro movimento
-      If EgtMoveRawPart(nRawId, vtMove) Then
+      If EgtMoveRawPart(nRawId, vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += vtMove
+            vtMove += vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then Return True
          Else
-            EgtMoveRawPart(nRawId, -vtMove)
+            EgtMoveRawPart(nRawId, -vtOriMove)
+         End If
+      End If
+      ' Provo ad aggiungere un altro movimento
+      If EgtMoveRawPart(nRawId, vtOriMove) Then
+         If VerifyRawWithOtherRaws(nRawId, dMindist) Then
+            vtMove += vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then Return True
+         Else
+            EgtMoveRawPart(nRawId, -vtOriMove)
          End If
       End If
       ' Provo ad aggiungere un movimento dimezzato
-      If EgtMoveRawPart(nRawId, 0.5 * vtMove) Then
+      If EgtMoveRawPart(nRawId, 0.5 * vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += 0.5 * vtMove
+            vtMove += 0.5 * vtOriMove
+            nMove += 1
+            If nMoveLevel = nMove Then Return True
          Else
-            EgtMoveRawPart(nRawId, -0.5 * vtMove)
+            EgtMoveRawPart(nRawId, -0.5 * vtOriMove)
          End If
       End If
-      ' Provo ad aggiunger un movimento 1/4
-      If EgtMoveRawPart(nRawId, 0.25 * vtMove) Then
+      ' Provo ad aggiungere un movimento 1/4
+      If EgtMoveRawPart(nRawId, 0.25 * vtOriMove) Then
          If VerifyRawWithOtherRaws(nRawId, dMindist) Then
-            vtMove += 0.25 * vtMove
+            vtMove += 0.25 * vtOriMove
          Else
-            EgtMoveRawPart(nRawId, -0.25 * vtMove)
+            EgtMoveRawPart(nRawId, -0.25 * vtOriMove)
          End If
       End If
       Return True

EgtStoneLib/VacuumCups.vb

@@ -8,6 +8,8 @@ Module VacuumCups
    Private m_nVacId As Integer = GDB_ID.NULL
    Private m_nRefId As Integer = GDB_ID.NULL
    Private m_dPreferredRot As Double = 0
+   Private m_dPrefVertRotXMinus As Double = 0
+   Private m_dPrefVertRotXPlus As Double = 0
    Private m_dDripRefAng As Double = 0
 
    ' Nome del gruppo temporaneo per le ventose
@@ -73,7 +75,10 @@ Module VacuumCups
       m_nVacId = EgtCopyGlob(nLayId, m_nTempId)
       If m_nVacId = GDB_ID.NULL Then Return False
       ' Angolo di rotazione preferito
-      EgtGetInfo( m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
+      ' Angoli di rotazione preferiti per ventosa in verticale (lungo Y) a sinistra e a destra del centro tavola
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
       ' Direzione di riferimento per tagli Drip
       EgtGetInfo( m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
       ' Nascondo il gruppo ma rendo visibili le curve di contorno delle ventose
@@ -363,6 +368,9 @@ Module VacuumCups
       If b3Vac.IsEmpty() Then Return INFINITO
       ' Se box maggiore di quello del pezzo, scarto soluzione
       If b3Vac.Radius() > b3Raw.Radius() Then Return INFINITO
+      ' Recupero l'area della tavola
+      Dim b3Tab As New BBox3d
+      EgtGetTableArea(1, b3Tab)
       ' Determino il movimento
       vtMove = ptRawCen - b3Vac.Center()
       b3Vac.Move(vtMove)
@@ -374,11 +382,19 @@ Module VacuumCups
          frMinRect.VersX().ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
          dRotAngDeg = dAngOrizzDeg
          If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
+         Dim dPreferredRot As Double = m_dPreferredRot
+         If Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45 Then
+            If frMinRect.Orig().x < b3Tab.Center().x Then
+               dPreferredRot = m_dPrefVertRotXMinus
+            Else
+               dPreferredRot = m_dPrefVertRotXPlus
+            End If
+         End If
          Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
-         While dRotAngDeg - m_dPreferredRot >= dAngDelta / 2 
+         While dRotAngDeg - dPreferredRot >= dAngDelta / 2
             dRotAngDeg -= dAngDelta
          End While
-         While dRotAngDeg - m_dPreferredRot <= -dAngDelta / 2
+         While dRotAngDeg - dPreferredRot <= -dAngDelta / 2
             dRotAngDeg += dAngDelta
          End While
       Else
@@ -431,8 +447,6 @@ Module VacuumCups
       ptRef.Move(vtMove)
       ptRef.Rotate(ptRotCen, Vector3d.Z_AX(), dRotAngDeg)
       ' Ne calcolo la distanza dal centro della tavola
-      Dim b3Tab As New BBox3d
-      EgtGetTableArea(1, b3Tab)
       Dim dDist As Double = Point3d.DistXY(ptRef, b3Tab.Center())
       Return dDist
    End Function

EgtStoneLib/VeinMatchingWindow.xaml

@@ -25,7 +25,10 @@
          <Button Name="ExportBtn" Height="40" Width="80"
                  Margin="0,5,0,0"
                  Content="Export"/>
-      </StackPanel> 
+         <Button Name="AssemblyBtn" Height="40" Width="80"
+                 Margin="0,5,0,0"
+                 Content="3D"/>
+        </StackPanel> 
 
    </Grid>
 

EgtStoneLib/VeinMatchingWindow.xaml.vb

@@ -1,5 +1,6 @@
 Imports System.IO
 Imports System.Windows.Interop
+Imports System.Collections.ObjectModel
 Imports System.Runtime.InteropServices
 Imports EgtUILib
 Imports EgtWPFLib5
@@ -316,6 +317,7 @@ Public Class VeinMatchingWindow
                      MessageBox.Show(Me, EgtMsg(91607) & " " & sMachGrpName, EgtMsg(91122), MessageBoxButton.OK, MessageBoxImage.Exclamation)
                   End If
                End If
+
             End If
             EgtSetCurrentContext(VeinMatchingScene.GetCtx())
             ' Se selezione riuscita, la eseguo anche in VME
@@ -378,6 +380,13 @@ Public Class VeinMatchingWindow
       VeinMatching.Export(SaveFileDialog.FileName)
    End Sub
 
+   Private Sub AssemblyBtn_Click(sender As Object, e As RoutedEventArgs) Handles AssemblyBtn.Click
+      EstCalc.UpdateRawPart()
+      ' lo spessore deve essere aggiornato per ogni lastra! (devo cicolare sull'elenco delle "macchinate"
+      Dim ThicknessRaw As Double = EstCalc.GetRawHeight
+      VeinMatching.AssemblyParts(ThicknessRaw)
+   End Sub
+
    Private Sub Scene_KeyDown(sender As System.Object, e As System.Windows.Forms.KeyEventArgs) Handles VeinMatchingScene.KeyDown
       ' Con DEL eseguo cancellazione dei pezzi selezionati
       If e.KeyData = System.Windows.Forms.Keys.Delete Then
@@ -401,6 +410,8 @@ Friend Module VeinMatching
    ' Dimensioni immagine da esportare
    Private m_nImgWidth As Integer = 1600
    Private m_nImgHeight As Integer = 1200
+   ' Lista delle alzatine
+   Private m_ListAlzFront As New ObservableCollection(Of Aletta)
    ' Flag visualizzazione testi
    Private m_bShowText As Boolean = True
    Friend ReadOnly Property bShowText As Boolean
@@ -672,6 +683,15 @@ Friend Module VeinMatching
          ' Sistemo il colore
          Dim colWhite As New Color3d(255, 255, 255, 100)
          EgtSetColor(nRegId, colWhite)
+
+         ' Ripeto le stesse operazioni con il solido del pezzo, se esiste
+         Dim nSolidId As Integer = GetVeinPartSolidId(nId)
+         If nSolidId <> GDB_ID.NULL Then
+            EgtSetTextureName(nSolidId, GetVeinPhotoName(nInd))
+            EgtSetTextureFrame(nSolidId, refTxr, GDB_RT.GLOB)
+            EgtSetColor(nSolidId, colWhite)
+         End If
+
          ' Se richiesto, eseguo deselezione
          If bDeselect Then EgtDeselectObj(nId)
       End If
@@ -698,10 +718,14 @@ Friend Module VeinMatching
       If nId <> GDB_ID.NULL Then
          ' Recupero la regione del pezzo
          Dim nRegId As Integer = GetVeinPartRegionId(nId)
+         Dim nSolidId As Integer = GetVeinPartSolidId(nId)
          ' Sistemo il riferimento della texture
          Dim refTxr As New Frame3d
          GetVeinRefPhoto(nMainCtx, nPartId, nId, refTxr)
          EgtSetTextureFrame(nRegId, refTxr, GDB_RT.GLOB)
+         If nSolidId <> GDB_ID.NULL Then
+            EgtSetTextureFrame(nSolidId, refTxr, GDB_RT.GLOB)
+         End If
          EgtDraw()
       End If
       EgtSetCurrentContext(nMainCtx)
@@ -728,8 +752,15 @@ Friend Module VeinMatching
          ' Gli tolgo la texture
          EgtRemoveTextureData(nRegId)
          ' Sistemo il colore
-         Dim colAqua As New Color3d(0, 255, 255, 25)
-         EgtSetColor(nRegId, colAqua)
+         Dim colRegion As Color3d
+         EgtGetColor(EgtGetParent(nRegId), colRegion)
+         EgtSetColor(nRegId, colRegion)
+         ' ripeto per il solido
+         Dim nSolidId As Integer = GetVeinPartSolidId(nId)
+         If nSolidId <> GDB_ID.NULL Then
+            EgtRemoveTextureData(nSolidId)
+            EgtSetColor(nSolidId, colRegion)
+         End If
          ' Se richiesto, eseguo deselezione
          If bDeselect Then EgtDeselectObj(nId)
          EgtDraw()
@@ -1240,4 +1271,538 @@ Friend Module VeinMatching
       Return nRegId
    End Function
 
+   Private Function GetVeinPartSolidId(nVeinPartId As Integer) As Integer
+      ' Imposto VeinMatching context
+      Dim nCurrCtx = SetVeinContext()
+      If nCurrCtx = 0 Then Return GDB_ID.NULL
+      ' Gruppo regione
+      Dim nRegLayId As Integer = EgtGetFirstNameInGroup(nVeinPartId, NAME_VM_SOLID)
+      ' Entità superficie regione piatta
+      Dim nRegId As Integer = EgtGetFirstInGroup(nRegLayId)
+      While nRegId <> GDB_ID.NULL
+         If EgtGetType(nRegId) = GDB_TY.SRF_MESH Then
+            Exit While
+         End If
+         nRegId = EgtGetNext(nRegId)
+      End While
+      ' Se necessario, ripristino il contesto originale
+      If nCurrCtx > 0 Then EgtSetCurrentContext(nCurrCtx)
+      Return nRegId
+   End Function
+
+   ' ------------------- FUNZIONI PER GESTIONE ALZATINE E FRONTALINI -------------------
+   Friend Function CreateListAlzAndFront() As Boolean
+      m_ListAlzFront.Clear()
+      EgtSetCurrentContext(m_nVeinCtx)
+      Dim nId As Integer = EgtGetFirstPart()
+      While nId <> GDB_ID.NULL
+         ' verifico che il pezzo sia una alzatina
+         Dim sInfoName As String = String.Empty
+         EgtGetInfo(nId, "CMP", sInfoName)
+         If sInfoName = "AlzFront" Then
+            Dim AlzFront As New Aletta(nId)
+            m_ListAlzFront.Add(AlzFront)
+         End If
+         ' Passo al pezzo successivo
+         nId = EgtGetNextPart(nId)
+      End While
+      Return True
+   End Function
+
+   Friend Function LinkReferencesOnAlette() As Boolean
+      Dim x As Integer = EgtGetCurrentContext()
+      ' forzo il DB geometrico corrente
+      EgtSetCurrentContext(m_nVeinCtx)
+      Dim nId As Integer = EgtGetFirstPart()
+      While nId <> GDB_ID.NULL
+         ' escludo dalla ricerca le alette
+         Dim sCMP As String = String.Empty
+         EgtGetInfo(nId, "CMP", sCMP)
+         If sCMP = "AlzFront" Then
+            ' Passo al pezzo successivo
+            nId = EgtGetNextPart(nId)
+            Continue While
+         End If
+         ' Recupero gruppo regione
+         Dim nOutLoopLayId As Integer = EgtGetFirstNameInGroup(nId, NAME_OUTLOOP)
+         ' Entità lato
+         Dim nSideId As Integer = EgtGetFirstInGroup(nOutLoopLayId)
+         While nSideId <> GDB_ID.NULL
+            Dim sInfoGUID As String = String.Empty
+            EgtGetInfo(nSideId, "RefAF", sInfoGUID)
+            If Not String.IsNullOrEmpty(sInfoGUID) Then
+               Dim Item As Aletta
+               For Each Item In m_ListAlzFront
+                  If Item.RefGUID = sInfoGUID Then
+                     Item.IdSideRef = nSideId
+                  End If
+               Next
+               ' ricerco nella lista delle alette il suo 
+            End If
+            nSideId = EgtGetNext(nSideId)
+         End While
+         ' Passo al pezzo successivo
+         nId = EgtGetNextPart(nId)
+      End While
+      Return True
+   End Function
+
+   Friend Function AssemblyParts(ByVal ThicknessRaw As Double) As Boolean
+      Dim CurrContext As Integer = EgtGetCurrentContext()
+      ' per definizione un piano cucicina deve avere lo stesso spessore delle alette
+      '(abbiamo dato per scontato che le alette siano realizate sullo stesso grezzo del pinao cucina...)
+      CreateListAlzAndFront()
+      LinkReferencesOnAlette()
+
+      EgtSetCurrentContext(m_nVeinCtx)
+
+      ' costruisco tutti i piani cucina (recupero l'Id geometrico del VeinMatch)
+      Dim nId As Integer = EgtGetFirstPart()
+      While nId <> GDB_ID.NULL
+         Dim sInfoName As String = String.Empty
+         EgtGetInfo(nId, "CMP", sInfoName)
+         ' recuoer
+         Dim sNominalThickness As String = String.Empty
+         EgtGetInfo(nId, "RawTN", sNominalThickness)
+         ' verifico che il pezzo sia una piano cucina 
+         If sInfoName.Contains("PCucina") Or sInfoName.Contains("PBagno") Then
+            If Not CreateKitchenTop(nId, ThicknessRaw) Then Return False
+         End If
+         ' altrimenti passo al pezzo successivo
+         nId = EgtGetNextPart(nId)
+      End While
+
+      ' costruisco alzatine e frontalini
+      Dim Item As Aletta
+      For Each Item In m_ListAlzFront
+         ' verifico che il disegno 3D non sia già stato fatto 
+         Dim nInfo3D As Integer = 0
+         EgtGetInfo(Item.SideId, "Info3D", nInfo3D)
+         If nInfo3D <> 1 Then
+            ' EgtSetInfo(Item.SideId, "Info3D", 1)
+            ' creo il solido 
+            If Not CreateAlettaSolid(Item, ThicknessRaw) Then Return False
+            '' posiziono il solido 
+            'If Not MoveAlettaSolid(Item, ThicknessRaw) Then Return False
+         End If
+         ' posiziono il solido 
+         If Not MoveAlettaSolid(Item, ThicknessRaw) Then Return False
+         ' solo se arrivo fino a qui allora imposto l'info 
+         EgtSetInfo(Item.SideId, "Info3D", 1)
+      Next
+      Draw()
+      Return True
+   End Function
+
+   Friend Function CreateKitchenTop(ByRef nId As Integer, ByRef ThicknessRaw As Double) As Boolean
+
+      ' creo o svuoto layer per facce del solido
+      Dim nSolidGrp As Integer = EgtGetFirstNameInGroup(nId, NAME_VM_SOLID)
+      If nSolidGrp <> GDB_ID.NULL Then
+         EgtEmptyGroup(nSolidGrp)
+      Else
+         nSolidGrp = EgtCreateGroup(nId)
+         EgtSetName(nSolidGrp, NAME_VM_SOLID)
+      End If
+
+      ' recupero faccia top
+      Dim nRegGrp As Integer = EgtGetFirstNameInGroup(nId, NAME_REGION)
+      Dim nTopFr As Integer = EgtGetFirstInGroup(nRegGrp)
+      While nTopFr <> GDB_ID.NULL
+         If EgtGetType(nTopFr) = GDB_TY.SRF_FRGN Then Exit While
+         nTopFr = EgtGetNext(nTopFr)
+      End While
+      If nTopFr = GDB_ID.NULL Then Return False
+      EgtSetStatus(nTopFr, 0)
+
+      ' setto colore per il solido
+      Dim cCol As New Color3d
+      EgtGetColor(nTopFr, cCol)
+      EgtSetColor(nSolidGrp, cCol)
+
+      ' creo il solido
+      Dim bSameLoopsNbr As Boolean
+      Dim nSolidId As Integer
+      If Not CreateKitchenBaseSolid(nTopFr, nSolidGrp, ThicknessRaw, nSolidId, bSameLoopsNbr) Then Return False
+
+      ' aggiungo componenti interni
+      If Not AddInternalComponents(nSolidId, nTopFr, bSameLoopsNbr, ThicknessRaw) Then Return False
+
+      ' setto eventuale texture 
+      Dim sTextName As String = String.Empty
+      EgtGetTextureName(nTopFr, sTextName)
+      If sTextName <> String.Empty Then
+         Dim frText As New Frame3d
+         EgtGetTextureFrame(nTopFr, nRegGrp, frText)
+         EgtSetTextureName(nSolidId, sTextName)
+         EgtSetTextureFrame(nSolidId, frText)
+      End If
+
+      ' elimino curve ausiliarie 
+      Dim nIdx As Integer = EgtGetFirstInGroup(nSolidGrp)
+      While nIdx <> GDB_ID.NULL
+         Dim newId As Integer = EgtGetNext(nIdx)
+         If EgtGetType(nIdx) <> GDB_TY.SRF_MESH Then
+            EgtErase(nIdx)
+         End If
+         nIdx = newId
+      End While
+
+      'Dim nOutloopGrpOrig As Integer = EgtGetFirstNameInGroup(nId, NAME_OUTLOOP & ".orig")
+      'If nOutloopGrpOrig <> GDB_ID.NULL Then
+      '   EgtSetStatus(nOutloopGrpOrig, 1)
+      '   Dim nOutloopGrp As Integer = EgtGetFirstNameInGroup(nId, NAME_OUTLOOP)
+      '   EgtSetStatus(nOutloopGrp, 0)
+      'End If
+
+      Return True
+
+   End Function
+
+   Friend Function CreateKitchenBaseSolid(ByRef nTopFr As Integer, ByRef nSolidGrp As Integer, ByRef ThicknessRaw As Double,
+                                          ByRef nSolidStm As Integer, ByRef bSameLoopsNbr As Boolean) As Boolean
+
+      ' creo la faccia bottom
+      Dim nBottomFr As Integer
+      Dim nPartId As Integer = EgtGetParent(EgtGetParent(nTopFr))
+      If Not EgtCalcFlatPartDownRegion(nPartId, ThicknessRaw) Then Return False
+      Dim nDwnRegGrp As Integer = EgtGetFirstNameInGroup(nPartId, "DwnReg")
+      If nDwnRegGrp <> GDB_ID.NULL Then
+         EgtSetStatus(nDwnRegGrp, 0)
+         nBottomFr = EgtGetFirstInGroup(nDwnRegGrp)
+         If nBottomFr = GDB_ID.NULL Then Return False
+      Else
+         nBottomFr = EgtCopy(nTopFr, nSolidGrp)
+      End If
+      Dim vtMove As Vector3d = -ThicknessRaw * Vector3d.Z_AX()
+      EgtMove(nBottomFr, vtMove)
+      EgtSetStatus(nBottomFr, 0)
+
+      ' superficie laterale 
+      Dim nTopCrvCount, nBottomCrvCount As Integer
+      Dim nTopCrv, nBottomCrv As Integer
+      nTopCrv = EgtExtractSurfFrChunkLoops(nTopFr, 0, nSolidGrp, nTopCrvCount)
+      nBottomCrv = EgtExtractSurfFrChunkLoops(nBottomFr, 0, nSolidGrp, nBottomCrvCount)
+      ' modifico il punto iniziale della curva bottom per ottenere una buona superficie rigata
+      Dim ptStartTop As Point3d
+      EgtStartPoint(nTopCrv, ptStartTop)
+      EgtChangeClosedCurveStartPoint(nBottomCrv, ptStartTop - vtMove)
+      Dim nLateralStm As Integer = EgtCreateSurfTmRuled(nSolidGrp, nBottomCrv, nTopCrv, 0, EPS_STM)
+
+      ' superfici trimesh per faccia top e bottom
+      Dim nTopStm, nBottomStm As Integer
+      bSameLoopsNbr = (nTopCrvCount = nBottomCrvCount)
+      If bSameLoopsNbr Then
+         If Not GetSrfTmFromFlatRegion(nTopFr, nSolidGrp, nTopStm) Then Return False
+         If Not GetSrfTmFromFlatRegion(nBottomFr, nSolidGrp, nBottomStm) Then Return False
+      Else
+         ' creo le facce top e bottom dimenticando eventuali aperture
+         nTopStm = EgtCreateSurfTmByFlatContour(nSolidGrp, nTopCrv, EPS_STM)
+         nBottomStm = EgtCreateSurfTmByFlatContour(nSolidGrp, nBottomCrv, EPS_STM)
+      End If
+      EgtInvertSurface(nBottomStm)
+
+      nSolidStm = EgtCreateSurfTmBySewing(nSolidGrp, 3, {nTopStm, nBottomStm, nLateralStm}, True)
+
+      ' elimino il layer generato dalla funzione "EgtCalcFlatPartDownRegion" e rinomino quello acceso
+      Dim nOutLoopOrig As Integer = EgtGetFirstNameInGroup(nPartId, NAME_OUTLOOP & ".orig")
+      If nOutLoopOrig <> GDB_ID.NULL Then
+         Dim nCurrOutLoop As Integer = EgtGetFirstNameInGroup(nPartId, NAME_OUTLOOP)
+         EgtErase(nCurrOutLoop)
+         EgtSetName(nOutLoopOrig, NAME_OUTLOOP)
+         EgtSetStatus(nOutLoopOrig, GDB_ST.ON_)
+      End If
+
+      Return nSolidStm <> GDB_ID.NULL
+
+   End Function
+
+   Friend Function AddInternalComponents(ByRef nSolidStm As Integer, ByRef nTopFr As Integer, ByRef bSameLoopsNbr As Boolean,
+                                         ByRef ThicknessRaw As Double) As Boolean
+
+      Dim nSolidGrp = EgtGetParent(nSolidStm)
+
+      ' aperture interne  
+      Dim nTopCrvCount As Integer
+      Dim nTopCrv As Integer = EgtExtractSurfFrChunkLoops(nTopFr, 0, nSolidGrp, nTopCrvCount)
+      If bSameLoopsNbr Then
+         Dim FacesStm(nTopCrvCount - 1) As Integer
+         FacesStm(0) = nSolidStm
+         ' creo le superfici laterali definite dalle aperture 
+         For i As Integer = 1 To nTopCrvCount - 1
+            FacesStm(i) = EgtCreateSurfTmByExtrusion(nSolidGrp, 1, {nTopCrv + i}, -ThicknessRaw * Vector3d.Z_AX(), EPS_STM)
+            EgtInvertSurface(FacesStm(i))
+         Next
+         nSolidStm = EgtCreateSurfTmBySewing(nSolidGrp, nTopCrvCount, FacesStm, True)
+      Else
+         ' creo le aperture per sottrazione di solidi
+         For i As Integer = 1 To nTopCrvCount - 1
+            Dim nComponentSrf As Integer = EgtCreateSurfTmByRegionExtrusion(nSolidGrp, 1, {nTopCrv + i}, -(ThicknessRaw + 10) * Vector3d.Z_AX(), EPS_STM)
+            EgtSurfTmSubtract(nSolidStm, nComponentSrf)
+            EgtErase(nComponentSrf)
+         Next
+      End If
+
+      ' ribassi 
+      Dim nId As Integer = EgtGetFirstGroupInGroup(EgtGetParent(nSolidGrp))
+      While nId <> GDB_ID.NULL
+         Dim sName As String = ""
+         EgtGetName(nId, sName)
+         If sName <> "Pocket" Then
+            nId = EgtGetNextGroup(nId)
+            Continue While
+         End If
+         ' cerco curva composita che definisce il ribasso 
+         Dim nCrvCompoId As Integer = EgtGetFirstInGroup(nId)
+         While nCrvCompoId <> GDB_ID.NULL
+            If EgtGetType(nCrvCompoId) = GDB_TY.CRV_COMPO Then Exit While
+            nCrvCompoId = EgtGetNext(nCrvCompoId)
+         End While
+
+         Dim dThick As Double
+         EgtCurveThickness(nCrvCompoId, dThick)
+         Dim vtExtr As Vector3d
+         EgtCurveExtrusion(nCrvCompoId, vtExtr)
+         Dim nRecessSrf As Integer = EgtCreateSurfTmByRegionExtrusion(nId, 1, {nCrvCompoId}, (dThick + 100) * vtExtr, EPS_STM)
+         EgtSurfTmSubtract(nSolidStm, nRecessSrf)
+         EgtErase(nRecessSrf)
+
+         ' Passo al pezzo successivo
+         nId = EgtGetNextGroup(nId)
+      End While
+
+      Return True
+   End Function
+   Friend Function GetSrfTmFromFlatRegion(ByRef nFlatRegion As Integer, ByRef nSolidGrp As Integer, ByRef nSrfTmId As Integer) As Boolean
+
+      If nFlatRegion = GDB_ID.NULL Then Return False
+      ' curve che delimitano la superficie
+      Dim nCrvCount As Integer
+      Dim nCrv As Integer = EgtExtractSurfFrChunkLoops(nFlatRegion, 0, nSolidGrp, nCrvCount)
+      If nCrv = GDB_ID.NULL Then Return False
+      ' creo array con gli indici delle curve 
+      Dim CrvList(nCrvCount - 1) As Integer
+      For i As Integer = 0 To nCrvCount - 1
+         CrvList(i) = nCrv + i
+      Next
+      nSrfTmId = EgtCreateSurfTmByRegion(nSolidGrp, CrvList, EPS_STM)
+      ' cancello le curve create 
+      For i As Integer = 0 To nCrvCount - 1
+         EgtErase(CrvList(i))
+      Next
+
+      Return nSrfTmId <> GDB_ID.NULL
+
+   End Function
+
+   Friend Function CreateAlettaSolid(ByRef Item As Aletta, ByRef ThicknessRaw As Double) As Boolean
+
+      ' angoli per i tagli
+      Dim dAngL, dAngR, dAng As Double
+      EgtGetInfo(Item.SideId + 1, INFO_SIDE_ANGLE, dAngR)
+      EgtGetInfo(Item.SideId + 3, INFO_SIDE_ANGLE, dAngL)
+      EgtGetInfo(Item.SideId, INFO_SIDE_ANGLE, dAng)
+
+      If Math.Abs(dAngL - 90) < EPS_SMALL Or Math.Abs(dAngL + 90) < EPS_SMALL Then dAngL = 0
+      If Math.Abs(dAngR - 90) < EPS_SMALL Or Math.Abs(dAngR + 90) < EPS_SMALL Then dAngR = 0
+      If Math.Abs(dAng - 90) < EPS_SMALL Or Math.Abs(dAng + 90) < EPS_SMALL Then dAng = 0
+
+      ' punti che delimitano la front face (faccia adiacente a top lungo il lato di riferimento)
+      Dim pt1, pt2, pt3, pt4 As Point3d
+      EgtStartPoint(Item.SideId, pt4)
+      EgtEndPoint(Item.SideId, pt3)
+      pt2 = pt3 - ThicknessRaw * Vector3d.Z_AX()
+      pt1 = pt4 - ThicknessRaw * Vector3d.Z_AX()
+
+      ' aggiungo tagli inclinati
+      pt2 = pt2 + ThicknessRaw * Math.Tan(dAngR * Math.PI / 180) * Vector3d.X_AX()
+      pt1 = pt1 - ThicknessRaw * Math.Tan(dAngL * Math.PI / 180) * Vector3d.X_AX()
+
+      ' aggiungo eventuale taglio sul lato superiore  
+      pt2 = pt2 - ThicknessRaw * Math.Tan(dAng * Math.PI / 180) * Vector3d.Y_AX()
+      pt1 = pt1 - ThicknessRaw * Math.Tan(dAng * Math.PI / 180) * Vector3d.Y_AX()
+
+      ' punti che delimitano back face
+      Dim HeightTop As Double
+      EgtCurveLength(Item.SideId + 1, HeightTop)
+      Dim HeightBottom As Double = HeightTop + ThicknessRaw * Math.Tan(dAng * Math.PI / 180)
+      Dim ptB1 As Point3d = pt1 + HeightBottom * Vector3d.Y_AX()
+      Dim ptB2 As Point3d = pt2 + HeightBottom * Vector3d.Y_AX()
+      Dim ptB3 As Point3d = pt3 + HeightTop * Vector3d.Y_AX()
+      Dim ptB4 As Point3d = pt4 + HeightTop * Vector3d.Y_AX()
+
+      ' Creo o svuoto layer per facce del solido
+      Dim nSolidGrp As Integer = EgtGetFirstNameInGroup(Item.PartId, NAME_VM_SOLID)
+      If nSolidGrp <> GDB_ID.NULL Then
+         EgtEmptyGroup(nSolidGrp)
+      Else
+         nSolidGrp = EgtCreateGroup(Item.PartId)
+         EgtSetName(nSolidGrp, NAME_VM_SOLID)
+      End If
+      Dim nRegionGrp As Integer = EgtGetFirstNameInGroup(Item.PartId, NAME_REGION)
+      Dim cCol As New Color3d
+      EgtGetColor(EgtGetFirstInGroup(nRegionGrp), cCol)
+      EgtSetColor(nSolidGrp, cCol)
+
+      ' Top Face
+      Dim nTopSrfFR As Integer = EgtGetFirstInGroup(nRegionGrp)
+      Dim tmp As Integer
+      Dim nTopCrv As Integer = EgtExtractSurfFrChunkLoops(nTopSrfFR, 0, nRegionGrp, tmp)
+      If nTopCrv = GDB_ID.NULL Then Return False
+      Dim nTopSrf As Integer = EgtCreateSurfTmByRegion(nSolidGrp, {nTopCrv}, EPS_SMALL)
+      EgtErase(nTopCrv)
+      EgtSetStatus(nTopSrfFR, 0)
+
+      Dim nFrontSrf, nBackSrf, nBottomSrf, nRightSrf, nLeftSrf As Integer
+      ' Front Face
+      If Not CreateSolidFace(nSolidGrp, {pt1, pt2, pt3, pt4}, nFrontSrf, False) Then Return False
+      ' Back Face
+      If Not CreateSolidFace(nSolidGrp, {ptB1, ptB4, ptB3, ptB2}, nBackSrf) Then Return False
+      ' Bottom face
+      If Not CreateSolidFace(nSolidGrp, {pt2, pt1, ptB1, ptB2}, nBottomSrf) Then Return False
+      ' Right face
+      If Not CreateSolidFace(nSolidGrp, {ptB1, pt1, pt4, ptB4}, nRightSrf) Then Return False
+      ' Left face
+      If Not CreateSolidFace(nSolidGrp, {ptB2, ptB3, pt3, pt2}, nLeftSrf) Then Return False
+
+      ' creo il solido 
+      Dim nSolidSrf As Integer = EgtCreateSurfTmBySewing(nSolidGrp, 6, {nTopSrf, nFrontSrf, nBackSrf, nBottomSrf, nRightSrf, nLeftSrf}, True)
+
+      ' setto eventuale texture 
+      Dim sTextName As String = String.Empty
+      EgtGetTextureName(nTopSrfFR, sTextName)
+      If sTextName <> String.Empty Then
+         Dim frText As New Frame3d
+         EgtGetTextureFrame(nTopSrfFR, nRegionGrp, frText)
+         EgtSetTextureName(nSolidSrf, sTextName)
+         EgtSetTextureFrame(nSolidSrf, frText)
+      End If
+
+      Dim nOutloopGrp As Integer = EgtGetParent(Item.SideId)
+      EgtSetStatus(nOutloopGrp, 0)
+
+      Return True
+   End Function
+
+   Friend Function CreateSolidFace(ByRef nSrfGrp As Integer, ByRef Points As Point3d(), ByRef nSrfId As Integer,
+                                   Optional ByRef bDeleteCrv As Boolean = True) As Boolean
+
+      If Points.Count() <> 4 Then Return False
+
+      Dim nCrvId As Integer = EgtCreateCurveCompo(nSrfGrp, {EgtCreateLine(nSrfGrp, Points(0), Points(1)),
+                                                            EgtCreateLine(nSrfGrp, Points(1), Points(2)),
+                                                            EgtCreateLine(nSrfGrp, Points(2), Points(3)),
+                                                            EgtCreateLine(nSrfGrp, Points(3), Points(0))}, True)
+
+      If nCrvId = GDB_ID.NULL Then Return False
+      nSrfId = EgtCreateSurfTmByRegion(nSrfGrp, {nCrvId}, EPS_SMALL)
+      If bDeleteCrv Then
+         EgtErase(nCrvId)
+      Else
+         EgtSetStatus(nCrvId, GDB_ST.OFF)
+      End If
+      Return nSrfId <> GDB_ID.NULL
+   End Function
+
+   Friend Function MoveAlettaSolid(ByRef Item As Aletta, ByRef ThicknessRaw As Double) As Boolean
+
+      Dim nType As Integer
+      If Not EgtGetInfo(Item.IdSideRef, "AF", nType) Then Return False
+
+      Dim ptSRef, ptERef, ptE As Point3d
+      If Not EgtStartPoint(Item.IdSideRef, GDB_ID.ROOT, ptSRef) Then Return False
+      If Not EgtEndPoint(Item.IdSideRef, GDB_ID.ROOT, ptERef) Then Return False
+      If Not EgtEndPoint(Item.SideId, GDB_ID.ROOT, ptE) Then Return False
+
+      ' verifco che sia già stato ruotato 
+      Dim nInfo3D As Integer = 0
+      EgtGetInfo(Item.SideId, "Info3D", nInfo3D)
+
+      If nInfo3D <> 1 Then
+         ' ruoto il solido intorno al lato di riferimento
+         Dim vtRot As Vector3d = ptERef - ptSRef
+         If nType = 1 Then
+            EgtRotate(Item.PartId, ptE, vtRot, -90, GDB_RT.GLOB)
+         ElseIf nType = 2 Then
+            EgtRotate(Item.PartId, ptE, vtRot, 90, GDB_RT.GLOB)
+         End If
+      End If
+
+      ' punto di riferimento per la traslazione sul solido
+      Dim ptSolid As Point3d
+      If nType = 1 Then
+         ' cerco id della curva che definisce la front face
+         Dim nSolidGrp As Integer = EgtGetFirstNameInGroup(Item.PartId, NAME_VM_SOLID)
+         Dim nFrontCrvId As Integer = EgtGetFirstInGroup(nSolidGrp)
+         EgtStartPoint(nFrontCrvId, ptSolid)
+      ElseIf nType = 2 Then
+         EgtStartPoint(Item.SideId, ptSolid)
+      End If
+
+      Dim ItemFrame As New Frame3d
+      If Not EgtGetGroupGlobFrame(Item.PartId, ItemFrame) Then Return False
+      ptSolid.ToGlob(ItemFrame)
+
+      'punto di riferimento per la traslazione sul piano cucina
+      Dim ptKitchen As Point3d = ptERef
+      ' traslazione
+      Dim vtMove As Vector3d = ptKitchen - ptSolid
+      EgtMove(Item.PartId, vtMove, GDB_RT.GLOB)
+
+      Return True
+   End Function
 End Module
+
+Public Class Aletta
+
+   Private m_PartId As Integer = -1
+   Public ReadOnly Property PartId As Integer
+      Get
+         Return m_PartId
+      End Get
+   End Property
+
+   Private m_SideId As Integer = -1
+   Public ReadOnly Property SideId As Integer
+      Get
+         Return m_SideId
+      End Get
+   End Property
+
+   Private m_RefGUID As String = String.Empty
+   Public ReadOnly Property RefGUID As String
+      Get
+         Return m_RefGUID
+      End Get
+   End Property
+
+   Private m_IdSideRef As Integer = -1
+   Public Property IdSideRef As Integer
+      Get
+         Return m_IdSideRef
+      End Get
+      Set(value As Integer)
+         m_IdSideRef = value
+      End Set
+   End Property
+
+   Sub New(nId As Integer)
+      m_PartId = nId
+
+      ' Recupero l'info legata al lato che contiene iil riferiemnto
+      Dim nOutLoopLayId As Integer = EgtGetFirstNameInGroup(nId, NAME_OUTLOOP)
+      ' Entità lato
+      Dim nSideId As Integer = EgtGetFirstInGroup(nOutLoopLayId)
+      While nSideId <> GDB_ID.NULL
+         Dim sInfoGUID As String = String.Empty
+         EgtGetInfo(nSideId, "RefAF", sInfoGUID)
+         If Not String.IsNullOrEmpty(sInfoGUID) Then
+            m_RefGUID = sInfoGUID
+            m_SideId = nSideId
+            Exit While
+         End If
+         nSideId = EgtGetNext(nSideId)
+      End While
+   End Sub
+
+End Class

MachinePanel/MachinePanelV.xaml

@@ -13,16 +13,17 @@
             Height="20" Width="150"/>-->
    
    <Button Command="{Binding ToolDbCommand}" ToolTip="{Binding ToolDBToolTip}"
-           Style="{StaticResource ToolBar_TextButton}" Width="55" Content="{Binding ToolDBMsg}"/>
+           Style="{StaticResource ToolBar_TextButton}" Width="70" Content="{Binding ToolDBMsg}"/>
    <Button Command="{Binding MachDbCommand}" ToolTip="{Binding MachiningDbToolTip}"
-           Style="{StaticResource ToolBar_TextButton}" Width="55" Content="{Binding MachiningDbMsg}"/>
+           Style="{StaticResource ToolBar_TextButton}" Width="70" Content="{Binding MachiningDbMsg}"/>
    <Button Command="{Binding SetUpCommand}" ToolTip="{Binding SetUpToolTip}"
-           Style="{StaticResource ToolBar_TextButton}" Width="55" Content="{Binding SetUpMsg}"
+           Style="{StaticResource ToolBar_TextButton}" Width="70" Content="{Binding SetUpMsg}"
            Background="{Binding SetUp_Background}"/>
+   <Button Command="{Binding WaterjetDbCommand}" ToolTip="{Binding WaterjetDbToolTip}"
+           Style="{StaticResource ToolBar_Button}" Width="70" Content="{Binding WaterjetDbMsg}" Visibility="{Binding WjDb_Visibility}"/>
    <Button Command="{Binding MachOptionsCommand}" ToolTip="{Binding OptionsToolTip}">
       <Image Source="/Resources/TopCommandBar/Options.png" Height="22" />
    </Button>
-   <Button Command="{Binding WaterjetDbCommand}" ToolTip="{Binding WaterjetDbToolTip}"
-           Style="{StaticResource ToolBar_Button}" Content="{Binding WaterjetDbMsg}" Visibility="{Binding WjDb_Visibility}"/>
+   
 
 </EgtFloating:EgtFloatingPanel>

MachinePanel/MyMachinePanelVM.vb

@@ -47,7 +47,7 @@ Public Class MyMachinePanelVM
    End Property
    Public ReadOnly Property WaterjetDbMsg As String
       Get
-         Return "WJ" 'EgtMsg(MSG_MACHINEPAGEUC + 7)
+         Return "DB WaterJet" 'EgtMsg(MSG_MACHINEPAGEUC + 7)
       End Get
    End Property
 

MainWindow/MainWindowM.vb

@@ -195,8 +195,8 @@ Public Class MainWindowM
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace( sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2311, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2311, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2402, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2402, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.OFFICE_BASE)
       ' Inizializzazione generale di EgtInterface

My Project/AssemblyInfo.vb

@@ -28,9 +28,9 @@ Imports System.Windows
 <Assembly: AssemblyDescription("OmagOFFICE 32 bit")> 
 #End If
 #End If
-<Assembly: AssemblyCompany("EgalTech s.r.l.")> 
+<Assembly: AssemblyCompany("Egalware s.r.l.")> 
 <Assembly: AssemblyProduct("OmagOFFICE")> 
-<Assembly: AssemblyCopyright("Copyright ©  2017-2021 by EgalTech s.r.l.")> 
+<Assembly: AssemblyCopyright("Copyright ©  2017-2022 by Egalware s.r.l.")> 
 <Assembly: AssemblyTrademark("")> 
 <Assembly: ComVisible(false)>
 'In order to begin building localizable applications, set 
@@ -69,6 +69,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.3.11.2")>
-<Assembly: AssemblyFileVersion("2.3.11.2")>
+<Assembly: AssemblyVersion("2.4.2.3")>
+<Assembly: AssemblyFileVersion("2.4.2.3")>
 

OmagOFFICE.vbproj

@@ -255,6 +255,10 @@
       <DependentUpon>SplitModeV.xaml</DependentUpon>
     </Compile>
     <Compile Include="OptionPanel\MachiningTab\SplitModeVM.vb" />
+    <Compile Include="OptionPanel\NestingTab\MultiSelectionV.xaml.vb">
+      <DependentUpon>MultiSelectionV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="OptionPanel\NestingTab\MultiSelectionVM.vb" />
     <Compile Include="OptionPanel\NestingTab\NestingTabV.xaml.vb">
       <DependentUpon>NestingTabV.xaml</DependentUpon>
     </Compile>
@@ -437,6 +441,10 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="OptionPanel\NestingTab\MultiSelectionV.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="OptionPanel\NestingTab\NestingTabV.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>

OptionPanel/MachiningTab/SplitModeVM.vb

@@ -663,7 +663,7 @@ Public Class SplitModeVM
       SplitModeIsEnabled = Not OmagOFFICEMap.refMachiningTabVM.IsShow
 
       ' nascondo i comandi che non devono essere visualizzati in funzione delle lavorazioni attive
-      If m_nCountSawing = 0 And (m_nCountWaterjetting > 0 Or m_nCountOtherMachining) Then
+      If m_nCountSawing = 0 And (m_nCountWaterjetting > 0 Or m_nCountOtherMachining > 0) Then
          VisibilityButtonFromMachining(MCH_OY.WATERJETTING)
       Else
          VisibilityButtonFromMachining(MCH_OY.SAWING)
@@ -1718,13 +1718,22 @@ Public Class SplitModeVM
             If Not ModifStartWindow.ShowDialog() Then Return
             ' Modifica della lavorazione
             Dim dUsal As Double = ModifStartWindowVM.GetVal()
-            EgtSetCurrMachining(nOperId)
-            Dim dAddLen As Double = 0
-            EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
-            If dAddLen - dOrigUsal < -10 * EPS_SMALL Then Return
-            EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen + dUsal - dOrigUsal)
-            EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dUsal)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+            Dim bRepeat As Boolean = False
+            Do
+               EgtSetCurrMachining(nOperId)
+               Dim dAddLen As Double = 0
+               EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
+               If dAddLen - dOrigUsal < -10 * EPS_SMALL Then Return
+               EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen + dUsal - dOrigUsal)
+               EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dUsal)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               bRepeat = Not UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               If bRepeat Then
+                  EgtSetMachiningParam(MCH_MP.STARTADDLEN, dOrigUsal)
+                  EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
+                  dUsal = dOrigUsal
+               End If
+            Loop Until Not bRepeat
             ' verifico interferenza
             EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
             ColorMachining(m_MachiningList(nI))
@@ -1813,14 +1822,25 @@ Public Class SplitModeVM
             ModifStartWindowVM.SetVal(dOrigUeal)
             If Not ModifStartWindow.ShowDialog() Then Return
             ' Modifica della lavorazione
-            Dim dUsal As Double = ModifStartWindowVM.GetVal()
-            EgtSetCurrMachining(nOperId)
-            Dim dAddLen As Double = 0
-            EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
-            If dAddLen - dOrigUeal < -10 * EPS_SMALL Then Return
-            EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen + dUsal - dOrigUeal)
-            EgtSetInfo(nOperId, INFO_MCH_USER_EAL, dUsal)
-            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+            Dim dUeal As Double = ModifStartWindowVM.GetVal()
+            Dim bRepeat As Boolean = False
+            Do
+               EgtSetCurrMachining(nOperId)
+               Dim dAddLen As Double = 0
+               EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
+               If dAddLen - dOrigUeal < -10 * EPS_SMALL Then
+                  Return
+               End If
+               EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen + dUeal - dOrigUeal)
+               EgtSetInfo(nOperId, INFO_MCH_USER_EAL, dUeal)
+               UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               bRepeat = Not UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+               If bRepeat Then
+                  EgtSetMachiningParam(MCH_MP.ENDADDLEN, dOrigUeal)
+                  EgtSetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
+                  dUeal = dOrigUeal
+               End If
+            Loop Until Not bRepeat
             ' verifico interferenza
             EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
             ColorMachining(m_MachiningList(nI))
@@ -2208,13 +2228,21 @@ Public Class SplitModeVM
          Set(value As Boolean)
             If Not IsNothing(value) Then
                m_IsSelected = value
-               If value Then
+               If value AndAlso Not OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.Contains(Me) Then
                   OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.Add(Me)
                Else
                   OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.Remove(Me)
                End If
-               If OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.Count = 0 Then Return
-               If OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.Count = 1 Then OmagOFFICEMap.refSplitModeVM.m_bAreHomogeneous = True
+               ' se non è stato aggiunto nessun nuovo elemento alla lista dei selezionati allora esco
+               If OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.Count = 0 Then
+                  EgtDraw()
+                  NotifyPropertyChanged("IsSelected")
+                  Return
+               End If
+               ' se ho un solo elemento allora so che è coerrente con se stesso come lavorazione
+               If OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.Count = 1 Then
+                  OmagOFFICEMap.refSplitModeVM.m_bAreHomogeneous = True
+               End If
                ' creo lista ordinata dei selezionati
                Dim ItemList As New List(Of NameIdLsBxItem)
                For Each Item In OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList
@@ -2223,37 +2251,6 @@ Public Class SplitModeVM
 
                ' ------------------------ verifico che le lavorazioni siano dello stesso tipo ------------------------
                OmagOFFICEMap.refSplitModeVM.VerifyHomogenousMachining(ItemList)
-               'Dim nSawing As Integer = 0
-               'Dim nWaterjetting As Integer = 0
-               'Dim nOtherMachining As Integer = 0
-               '' conto il numero di tipi di lavprazioni
-               'For Each Item As NameIdLsBxItem In ItemList
-               '   If Item.Type = MCH_OY.SAWING Then
-               '      nSawing += 1
-               '   ElseIf Item.Type = MCH_OY.WATERJETTING Then
-               '      nWaterjetting += 1
-               '   Else
-               '      nOtherMachining += 1
-               '   End If
-               'Next
-               '' verifico se le lavorazioni sono omeogenee
-               'If nSawing > 0 And (nWaterjetting > 0 Or nOtherMachining > 0) Then
-               '   m_bAreHomogeneous = False
-               '   VisibilityButtonFromMachinig(MCH_OY.SAWING)
-               'ElseIf nSawing = 0 And nOtherMachining > 0 And nWaterjetting > 0 Then
-               '   m_bAreHomogeneous = False
-               '   VisibilityButtonFromMachinig(MCH_OY.WATERJETTING)
-               'Else
-               '   VisibilityButtonFromMachinig(ItemList(0).Type)
-               '   m_bAreHomogeneous = True
-               'End If
-               '' eventualmente stampo messaggio
-               'If Not m_bAreHomogeneous Then
-               '   m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
-               '   m_MainWindow.m_CurrentProjectPageUC.SetWarningMessage("Lavorazioni non omogenee")
-               'Else
-               '   m_MainWindow.m_CurrentProjectPageUC.ClearMessage()
-               'End If
                ' -----------------------------------------------------------------------------------------------------
 
                ItemList.Sort(Function(x, y) Comparer(Of Integer).Default.Compare(OmagOFFICEMap.refSplitModeVM.m_ItemList.IndexOf(x),

OptionPanel/NestingTab/MultiSelectionV.xaml

@@ -0,0 +1,41 @@
+<EgtWPFLib5:EgtCustomWindow x:Class="MultiSelectionV"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:OmagOFFICE="clr-namespace:OmagOFFICE"
+   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+   Title="{Binding TitleMsg}"
+   IsMinimizable="False"
+   IsClosable="False"
+   ShowInTaskbar="False"
+   Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
+   WindowStartupLocation="CenterOwner"
+   Width="270" Height="150"
+   ResizeMode="NoResize">
+
+    <DockPanel Margin="5,5,5,0">
+
+        <UniformGrid Columns="2" 
+                     DockPanel.Dock="Top"
+                     Margin="0,15,0,15">
+            <TextBlock Text="{Binding SelectionMsg}"/>
+            <TextBox Text="{Binding nNbrOfParts}"/>
+        </UniformGrid>
+
+        <UniformGrid Columns="4"
+                   DockPanel.Dock="Bottom"
+                   Margin="25,0,25,5">
+            <Button Command="{Binding OkCommand}"
+                    Style="{StaticResource OptionPanel_TextButton}"
+                    Content="{Binding OkMsg}">
+            </Button>
+            <ToggleButton Visibility="Hidden" />
+            <ToggleButton Visibility="Hidden" />
+            <Button Command="{Binding CancelCommand}"
+                    Style="{StaticResource OptionPanel_TextButton}"
+                    Content="{Binding CancelMsg}">
+            </Button>
+        </UniformGrid>
+
+    </DockPanel>
+
+    </EgtWPFLib5:EgtCustomWindow>

OptionPanel/NestingTab/MultiSelectionV.xaml.vb

@@ -0,0 +1,15 @@
+Public Class MultiSelectionV
+
+   Private WithEvents m_MultiSelectionVM As MultiSelectionVM
+
+   Sub New(Owner As Window, MultiSelVM As MultiSelectionVM)
+      MyBase.New(Owner)
+      ' This call is required by the designer.
+      InitializeComponent()
+      Me.DataContext = MultiSelVM
+      ' Assegno al riferimento locale al VM il VM preso dal DataContext
+      m_MultiSelectionVM = MultiSelVM
+      Me.Show()
+   End Sub
+
+End Class

OptionPanel/NestingTab/MultiSelectionVM.vb

@@ -0,0 +1,97 @@
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class MultiSelectionVM
+   Inherits VMBase
+
+   Private m_sRefGuidOfPart As String = String.Empty
+
+   Public ReadOnly Property TitleMsg As String
+      Get
+         Return "Multiple selection"
+      End Get
+   End Property
+   Public ReadOnly Property SelectionMsg As String
+      Get
+         Return "Number of Parts"
+      End Get
+   End Property
+
+   Public ReadOnly Property OkMsg As String
+      Get
+         Return "Ok"
+      End Get
+   End Property
+
+   Public ReadOnly Property CancelMsg As String
+      Get
+         Return "Cancel"
+      End Get
+   End Property
+
+   Private m_MultiSelectionV As MultiSelectionV
+   Public Sub SetMultiSelectionV(MultiSel As MultiSelectionV)
+      m_MultiSelectionV = MultiSel
+   End Sub
+
+   Private m_nNbrOfParts As Integer
+   Public Property nNbrOfParts As String
+      Get
+         Return m_nNbrOfParts.ToString
+      End Get
+      Set(value As String)
+         Dim nVal As Integer = 0
+         StringToInt(value, nVal)
+         m_nNbrOfParts = nVal
+         NotifyPropertyChanged("nNbrOfParts")
+      End Set
+   End Property
+
+   Private m_cmdOk As ICommand
+   Private m_cmdCancel As ICommand
+
+   Public ReadOnly Property OkCommand As ICommand
+      Get
+         If m_cmdOk Is Nothing Then
+            m_cmdOk = New Command(AddressOf OkCmd)
+         End If
+         Return m_cmdOk
+      End Get
+   End Property
+
+   Public Sub OkCmd(ByVal param As Object)
+      ' il numero di elementi indicato è corretto
+      ' deseleziono il pezzo corrente
+      DeselectPartInFaimily(m_sRefGuidOfPart)
+      Select Case m_nNbrOfParts
+         Case 0    ' Annulla
+            ' continuo senza eseguire niente
+         Case Else
+            ' seleziono il numero di pezzi indicati
+            SelectPartInFaimily(m_sRefGuidOfPart, m_nNbrOfParts)
+      End Select
+      ' chiudo la finestra
+      m_MultiSelectionV.Close()
+      EgtDraw()
+   End Sub
+
+   Public ReadOnly Property CancelCommand As ICommand
+      Get
+         If m_cmdCancel Is Nothing Then
+            m_cmdCancel = New Command(AddressOf CancelCmd)
+         End If
+         Return m_cmdCancel
+      End Get
+   End Property
+
+   Public Sub CancelCmd(ByVal param As Object)
+      ' chiudo la fiestra senza eseguire niente
+      m_MultiSelectionV.Close()
+      EgtDraw()
+   End Sub
+
+   Sub New(CurrNumberOfParts As Integer, sRefGuid As String)
+      m_nNbrOfParts = CurrNumberOfParts
+      m_sRefGuidOfPart = sRefGuid
+   End Sub
+End Class

OptionPanel/NestingTab/NestingTabV.xaml

@@ -24,7 +24,7 @@
               Command="{Binding ImportDxfCommand}">
          <Image Source="/Resources/NestingTab/ImportDxf.png" Stretch="Uniform"/>
       </Button>
-      <ToggleButton Grid.Column="4" Grid.Row="0"
+      <ToggleButton Grid.Column="4" Grid.Row="0"                
               Style="{StaticResource OptionPanel_NestingToggleButton}"
               IsChecked="{Binding CsvImport_IsChecked}">
          <Image Source="/Resources/NestingTab/ImportCsv.png" Stretch="Uniform"/>
@@ -148,11 +148,24 @@
               Margin="2.5,0,0,0"/>
    </UniformGrid>
 
-   <Button Content="{Binding RemovePartMsg}"
-           Style="{StaticResource OptionPanel_TextButton}"
-           Command="{Binding RemovePartCommand}"
-           Margin="0,0,0,5"/>
+    <Grid Margin="0,0,-2.5,5">
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+        </Grid.ColumnDefinitions>
+        <Button Content="{Binding RemovePartMsg}"
+                Grid.ColumnSpan="{Binding DragRettangle_Cl_Span}"
+                Style="{StaticResource OptionPanel_TextButton}"
+                Command="{Binding RemovePartCommand}"
+                Margin="0,0,2.5,0"/>
+        <ToggleButton Content="{Binding DragRettangleMsg}" Grid.Column="1"
+                Visibility="{Binding DragRettangle_Visibility}"         
+                Style="{StaticResource OptionPanel_ToggleButton}"
+                IsChecked="{Binding bDragRettangle}"
+                Margin="2.5,0,2.5,0"/>
+    </Grid>
 
+   
    <UniformGrid Columns="2" Margin="0,0,0,5">
       <Button Content="{Binding SelectAllMsg}"
               Style="{StaticResource OptionPanel_TextButton}"

OptionPanel/NestingTab/NestingTabVM.vb

@@ -35,6 +35,18 @@ Public Class NestingTabVM
    Private m_bTrfData As Boolean = False
    Private m_bCsvData As Boolean = False
 
+   ' Id del rettangolo, del traglio e della curva da modificare tramite Drag
+   Private m_nIdSelectedOutLoopRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedRegionRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedSawRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedCurvRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedTextRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedTextTopRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedFlatSurfRettangle As Integer = GDB_ID.NULL
+   Private m_SideListRettangle(4) As Integer
+   Private m_sTextContent As String = String.Empty
+
+
    Private m_CsvImportWindow As CsvWindowV
    Friend ReadOnly Property CsvImportWindow As CsvWindowV
       Get
@@ -103,8 +115,7 @@ Public Class NestingTabVM
       End Get
       Set(value As String)
          Dim dValue As Double
-         'StringToDouble(value, m_dRotationAngle)
-         If StringToLen(value, dValue) Then
+         If StringToDouble(value, dValue) Then
             If dValue < 0 Then
                dValue = 0
             ElseIf dValue > 180 Then
@@ -161,6 +172,12 @@ Public Class NestingTabVM
       End Get
    End Property
 
+   Public ReadOnly Property DragRettangleMsg As String
+      Get
+         Return "Drag Rectangle"
+      End Get
+   End Property
+
    Public ReadOnly Property SelectAllMsg As String
       Get
          Return EgtMsg(MSG_NESTPAGEUC + 4)
@@ -211,6 +228,13 @@ Public Class NestingTabVM
 #Region "CONSTRUCTOR"
 
    Sub New()
+      If (GetMainPrivateProfileInt(S_NEST, K_DRAGRETTANGLE, 1) <> 0) Then
+         m_DragRettangle_Visibility = Visibility.Visible
+      Else
+         m_DragRettangle_Visibility = Visibility.Collapsed
+      End If
+      NotifyPropertyChanged("DragRettangle_Visibility")
+      NotifyPropertyChanged("DragRettangle_Cl_Span")
       ' Creo riferimento a questa classe in OmagOFFICEMap
       OmagOFFICEMap.SetRefNestingTabVM(Me)
    End Sub
@@ -389,8 +413,29 @@ Public Class NestingTabVM
                If Not EgtGetPartPartClusterCenterGlob(nId, ptCen) Then Return False
                ' Rotazione del pezzo attorno al suo centro
                EgtRotate(nId, ptCen, Vector3d.Z_AX(), dAngRotDeg, GDB_RT.GLOB)
-               ' Sistemazione nel parcheggio
-               PackPartInStore(nId)
+
+               '---------------------- COUNTER PART ----------------------
+               ' Aggiorno il Guid assegnando la nuova rotazione
+               Dim sRefGroup As String = String.Empty
+               If EgtGetInfo(nId, INFO_REFGROUP, sRefGroup) Then
+                  Dim sCurrRefGroup As String = sRefGroup
+                  If UppDateGuidCode(sRefGroup, CreatePreGuidCode(nId)) Then
+                     EgtSetInfo(nId, INFO_REFGROUP, sRefGroup)
+                  End If
+                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
+                  CountPartInFamily(sCurrRefGroup)
+               End If
+               ' se esiste almento un pezzo del gruppo in parcheggio esco
+               If Not ParkInGroupFamily(nId) Then
+                  PackPartInStore(nId)
+               End If
+               ' ricarico l'lelenco dei pezzi in parcheggio
+               GetFamilyGroupInPark()
+               '---------------------- COUNTER PART ----------------------
+
+
+               '' Sistemazione nel parcheggio
+               'PackPartInStore(nId)
             End If
             ' Passo al successivo selezionato
             nId = EgtGetNextSelectedObj()
@@ -506,8 +551,322 @@ Public Class NestingTabVM
       Return True
    End Function
 
+#Region "DRAG RETTANGLE"
+
+   ' funzione chiamata da OnMyMouseMoveScene: verifica che la selezione sia corretta (deve essere il lato di una figura rettangolare)
+   Private Sub OnMyMouseDownSceneSelSideRettangle(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Si può selezionare solo con il tasto sinistro e se il bottone TEST Attivo
+      If e.Button <> Windows.Forms.MouseButtons.Left Then
+         Return
+      End If
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sLayer As String = String.Empty
+         ' layer di origine
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del Layer
+         EgtGetName(nIdParent, sLayer)
+         ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
+         If sLayer = NAME_OUTLOOP Then
+            If EgtGetType(nIdMy) = GDB_TY.CRV_LINE Then
+               ' -------------------------------- INIZIO VERIFICHE --------------------------------
+               m_nIdSelectedOutLoopRettangle = nIdParent
+               If Not IsRettangle(m_SideListRettangle) Then
+                  'm_CurrProjPage.ClearMessage()
+                  'm_CurrProjPage.SetWarningMessage("Non è un rettangolo (0)")
+                  Return
+               End If
+               ' recupero il gruppo della lavorazione associata
+               Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, "PV")
+               ' se non esiste un gruppo di lavorazione associato allora esco
+               If nIdPV = GDB_ID.NULL Then
+                  'm_CurrProjPage.ClearMessage()
+                  'm_CurrProjPage.SetWarningMessage("Pezzo in parcheggio (1)")
+                  Return
+               End If
+               ' se esiste ma è vuoto (pezzo scaricato da tavola)
+               If EgtGetFirstInGroup(nIdPV) = GDB_ID.NULL Then
+                  'm_CurrProjPage.ClearMessage()
+                  'm_CurrProjPage.SetWarningMessage("Pezzo in parcheggio (2)")
+                  Return
+               End If
+               ' Devo verificare che sia una lavorazione solo di lama?
+               Dim nIdSaw As Integer = EgtGetFirstNameInGroup(nIdPV, "Saw" & nIdMy.ToString)
+               ' -------------------------------- FINE VERIFICHE --------------------------------
+
+               If Not EgtGetGroupObjs(nIdSaw) Then
+                  m_nIdSelectedSawRettangle = nIdSaw
+                  m_nIdSelectedCurvRettangle = nIdMy
+
+                  m_nIdSelectedRegionRettangle = EgtGetFirstNameInGroup(nIdParentPart, NAME_REGION)
+                  ' recupero i testi cintenuti nel layer Region
+                  If m_nIdSelectedRegionRettangle <> GDB_ID.NULL Then
+                     Dim nCurrId As Integer = EgtGetFirstInGroup(m_nIdSelectedRegionRettangle)
+                     While nCurrId <> GDB_ID.NULL
+                        If EgtGetType(nCurrId) = GDB_TY.EXT_TEXT Then
+                           Dim sVal As String = String.Empty
+                           EgtTextGetContent(nCurrId, sVal)
+                           If sVal = "*TOP*" Then
+                              m_nIdSelectedTextTopRettangle = nCurrId
+                           Else
+                              m_nIdSelectedTextRettangle = nCurrId
+                              m_sTextContent = GetMyRettangleText(sVal)
+                           End If
+                        ElseIf EgtGetType(nCurrId) = GDB_TY.SRF_FRGN Then
+                           m_nIdSelectedFlatSurfRettangle = nCurrId
+                        End If
+                        nCurrId = EgtGetNext(nCurrId)
+                     End While
+                  End If
+                  ' seleziono ed evidenzio il lato selezionato
+                  EgtSelectObj(nIdSaw)
+                  EgtSetMark(nIdSaw)
+                  EgtSelectObj(nIdMy)
+                  EgtDraw()
+                  Exit While
+               End If
+            End If
+            ' se le'elemto corrente non è una linea
+         End If
+         ' se le'elemto corrente non appartiene al layer OutLoop passo al prossimo elemento dell'elenco
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+   End Sub
+
+   ' restituisce il valore del Text ripulito dalle dimensioni
+   Private Function GetMyRettangleText(sTextPz As String) As String
+      ' da DrawPageUC.xaml.vb/MultipleInsert
+      Dim sText As String = String.Empty
+      If sTextPz.Contains("<br/>") Then
+         Dim nLastIndex As Integer = sTextPz.LastIndexOf(">")
+         sText = sTextPz.Remove(nLastIndex + 1)
+         Return sText
+      End If
+      If sTextPz.Contains("  ") Then
+         Dim sInfo() As String = sTextPz.Split(" "c)
+         If sInfo.Count > 3 Then
+            Return sText = sInfo(0) & "  " & sInfo(1) & "  "
+         End If
+      End If
+      Return sText
+   End Function
+
+   ' verifico che la figura selezionata sia realmente un rettangolo
+   Private Function IsRettangle(ByRef IdSideList() As Integer) As Boolean
+      ' creo una lista con i lati del rettangolo
+      Dim nCounter As Integer = 0
+      ' recupero i lati dal leyer "OutLoop"
+      Dim IdSideRettangle As Integer = EgtGetFirstInGroup(m_nIdSelectedOutLoopRettangle)
+      While IdSideRettangle <> GDB_ID.NULL And nCounter < 4
+         Dim sVal As String = String.Empty
+         Dim dPrevAng As Double = 0
+         EgtGetInfo(IdSideRettangle, "PrevAng", sVal)
+         StringToDouble(sVal, dPrevAng)
+         Dim dNextAng As Double = 0
+         EgtGetInfo(IdSideRettangle, "NextAng", sVal)
+         StringToDouble(sVal, dNextAng)
+         ' se gli angoli non sono retti allora esco senza caricare il lato corrente
+         If Math.Abs(dPrevAng - 90) > EPS_ANG_SMALL OrElse Math.Abs(dNextAng - 90) > EPS_ANG_SMALL Then
+            Exit While
+         End If
+         IdSideList(nCounter) = IdSideRettangle
+         nCounter += 1
+         IdSideRettangle = EgtGetNext(IdSideRettangle)
+      End While
+      ' verifico che siano solo quattro lati
+      If IdSideRettangle = GDB_ID.NULL And nCounter = 4 Then
+         ' solo se la figura ha 4 lati ortogonali
+         Return True
+      End If
+
+      m_nIdSelectedOutLoopRettangle = GDB_ID.NULL
+      ' la figura presenta più/meno di 4 lati    
+      Return False
+   End Function
+
+   ' recupero le informazioni correnti per sapere se la figura è mdificabile
+   Private Function GetRettangleInfoScale(ByRef frFixed As Frame3d, ByRef MaxLen As Double, ByRef MinLen As Double) As Vector3d
+      ' determino la direzione del lato selezionato
+      Dim vtDirSelectedCurv As New Vector3d
+      EgtStartVector(m_nIdSelectedCurvRettangle, GDB_ID.ROOT, vtDirSelectedCurv)
+
+      ' recupero il lato successivo a quello selezionato 
+      Dim Index As Integer = 0
+      Dim Len As Double = 0
+      For Ind As Integer = 0 To 3
+         If m_SideListRettangle(Ind) = m_nIdSelectedCurvRettangle Then
+            ' verifico se esiste un lato Precedente altrimenti recupero l'ultimo della lista
+            If Ind = 0 Then
+               Index = 3
+            Else
+               Index = Ind - 1
+            End If
+         End If
+      Next
+      ' recupero la dimensione del lato
+      EgtCurveLength(m_SideListRettangle(Index), MaxLen)
+      EgtCurveLength(m_nIdSelectedCurvRettangle, MinLen)
+
+      ' verifico che il lato selezionato sia il maggiore
+      If MinLen > MaxLen Then Return Nothing
+
+      ' determimo il versore dal lato appena calcolato
+      Dim vtDir As New Vector3d
+
+      EgtStartVector(m_SideListRettangle(Index), GDB_ID.ROOT, vtDir)
+      vtDir.Normalize()
+      Dim dProjectionBaseX As Double = vtDir * Vector3d.X_AX
+      Dim ptFixed As New Point3d
+      EgtStartPoint(m_SideListRettangle(Index), GDB_ID.ROOT, ptFixed)
+
+      Dim vtPerp As New Vector3d(vtDir.x, vtDir.y, vtDir.z)
+      vtPerp.Rotate(Vector3d.Z_AX, 90)
+
+      ' determino il Frame corrente
+      frFixed = New Frame3d(ptFixed, vtDir, vtPerp, Vector3d.Z_AX)
+
+      Return vtDir
+
+   End Function
+
+   ' funzione chiamata da OnMyMouseMoveScene: gestisce la modifica lungo una dimensione del rettangolo selezionato
+   Private Sub OnMyMouseMoveSawRettangle(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Se drag non abilitato o già in esecuzione, esco
+      If Not m_bDrag Or m_bDragging Then Return
+      ' Se primo movimento di drag, verifico di aver superato la soglia di movimento in pixel
+      If m_bDragToStart Then
+         If Math.Abs(e.Location.X - m_locPrev.X) < m_nRestRadius And
+            Math.Abs(e.Location.Y - m_locPrev.Y) < m_nRestRadius Then
+            Return
+         End If
+         m_bDragToStart = False
+      End If
+
+      ' riferiemento che deve rimanere fisso del rettangolo 
+      Dim frFixed As Frame3d = Nothing
+      ' lunghezza del lato da modificare
+      Dim MaxLen As Double = 0
+      Dim MinLen As Double = 0
+      ' recupero info sul rettangolo selezionato
+      Dim vtDir As Vector3d = GetRettangleInfoScale(frFixed, MaxLen, MinLen)
+      If vtDir.Equals(Vector3d.NULL) Then
+         Return
+      End If
+
+      ' Inizio esecuzione di drag
+      m_bDragging = True
+
+      ' Ricavo il punto corrente in coordinate mondo
+      Dim ptCurr As Point3d
+      EgtUnProjectPoint(e.Location, ptCurr)
+      ' Ricavo il vettore di movimento
+      Dim vtMove As Vector3d = ptCurr - m_ptPrev
+      ' ricavo il valore efficace di allungamento (la proiezione)
+      Dim dProjection As Double = vtMove * vtDir
+      vtMove = vtDir * dProjection
+      ' recupero il valore di scalatura
+      Dim dScalefactor = dProjection / MaxLen + 1
+
+      ' Modifico dimensione figura
+      If Math.Abs(dScalefactor) > EPS_SMALL * EPS_SMALL Then
+         EgtScale(m_nIdSelectedOutLoopRettangle, frFixed, dScalefactor, 1, 1, GDB_ID.ROOT)
+         EgtScale(m_nIdSelectedFlatSurfRettangle, frFixed, dScalefactor, 1, 1, GDB_ID.ROOT)
+         Dim ptCen As Point3d
+         EgtCenterPoint(m_nIdSelectedTextRettangle, ptCen)
+         EgtModifyText(m_nIdSelectedTextRettangle, m_sTextContent & LenToString(MaxLen + dProjection, 2) & " x " & LenToString(MinLen, 2))
+         EgtMove(m_nIdSelectedTextRettangle, vtMove * 0.5, GDB_ID.ROOT)
+         If m_nIdSelectedTextTopRettangle <> GDB_ID.NULL Then
+            EgtMove(m_nIdSelectedTextTopRettangle, vtMove * 0.5, GDB_ID.ROOT)
+         End If
+      End If
+
+      ' verifico che il il lato  maggiore rimanga semore il lato maggiore
+      Dim bRettangleCorrect As Boolean = False
+      If (MaxLen + dProjection - MinLen) > EPS_SMALL Then bRettangleCorrect = True
+
+      Dim nWarn As Integer = 0
+      ResetAllMachinings(nWarn)
+      EnableReferenceRegion(False)
+      ' se la modifica genera un errore allora ripristino la figura prima della defomrazione
+      If Not EgtVerifyPart(EgtGetParent(m_nIdSelectedOutLoopRettangle), True) Or Not bRettangleCorrect Then
+         EgtScale(m_nIdSelectedOutLoopRettangle, frFixed, 1 / dScalefactor, 1, 1, GDB_ID.ROOT)
+         EgtScale(m_nIdSelectedFlatSurfRettangle, frFixed, 1 / dScalefactor, 1, 1, GDB_ID.ROOT)
+         Dim ptCen As Point3d
+         EgtCenterPoint(m_nIdSelectedTextRettangle, ptCen)
+         EgtModifyText(m_nIdSelectedTextRettangle, m_sTextContent & LenToString(MaxLen, 2) & " x " & LenToString(MinLen, 2))
+         EgtMove(m_nIdSelectedTextRettangle, -vtMove * 0.5, GDB_ID.ROOT)
+         If m_nIdSelectedTextTopRettangle <> GDB_ID.NULL Then
+            EgtMove(m_nIdSelectedTextTopRettangle, -vtMove * 0.5, GDB_ID.ROOT)
+         End If
+      End If
+
+      EgtDraw()
+      ' Aggiorno il punto precedente
+      m_ptPrev = ptCurr
+      ' Terminata esecuzione di drag
+      m_bDragging = False
+   End Sub
+
+   ' funzione chiamata da OnMyMouseUp: gestisce il reset di tutti gli indici in uso 
+   Public Sub ResetDragRettangleParam()
+      ' deseleziono l'elemento corrente
+      EgtDeselectObj(m_nIdSelectedSawRettangle)
+      EgtDeselectObj(m_nIdSelectedCurvRettangle)
+      EgtResetMark(m_nIdSelectedSawRettangle)
+      ' resetto gli indici
+      m_nIdSelectedOutLoopRettangle = GDB_ID.NULL
+      m_nIdSelectedRegionRettangle = GDB_ID.NULL
+      m_nIdSelectedSawRettangle = GDB_ID.NULL
+      m_nIdSelectedCurvRettangle = GDB_ID.NULL
+      m_nIdSelectedTextRettangle = GDB_ID.NULL
+      m_nIdSelectedTextTopRettangle = GDB_ID.NULL
+      m_nIdSelectedFlatSurfRettangle = GDB_ID.NULL
+      m_SideListRettangle = {GDB_ID.NULL, GDB_ID.NULL, GDB_ID.NULL, GDB_ID.NULL}
+      m_sTextContent = String.Empty
+      ' disattivo il drag
+      m_bDrag = False
+      ' aggiorno le lavorazioni
+      Dim nWarn As Integer = 0
+      ResetAllMachinings(nWarn)
+      EgtDraw()
+   End Sub
+
+#End Region    ' Drag Rettangolo
+
 #End Region    ' METHODS
 
+   Private m_bDragRettangle As Boolean
+   Public Property bDragRettangle As Boolean
+      Get
+         Return m_bDragRettangle
+      End Get
+      Set(value As Boolean)
+         m_bDragRettangle = value
+      End Set
+   End Property
+
+   Private m_DragRettangle_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property DragRettangle_Visibility As Visibility
+      Get
+         Return m_DragRettangle_Visibility
+      End Get
+   End Property
+
+   Public ReadOnly Property DragRettangle_Cl_Span As Integer
+      Get
+         If m_DragRettangle_Visibility = Visibility.Visible Then
+            Return 1
+         End If
+         Return 2
+      End Get
+   End Property
+
+
 #Region "COMMANDS"
 
 #Region "DrawCommand"
@@ -901,6 +1260,8 @@ Public Class NestingTabVM
    End Property
 
    Public Sub StorePart(ByVal param As Object)
+      ' creo la lista delle famiglie di pezzi presenti in parcheggio
+      GetFamilyGroupInPark()
       EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
       ' Ciclo di parcheggio dei pezzi selezionati
       Dim nId As Integer = EgtGetFirstSelectedObj()
@@ -973,13 +1334,20 @@ Public Class NestingTabVM
          If bEraseCsvParts OrElse Not EgtExistsInfo(nId, INFO_CSV_PATH) Then
             ' Se pezzo in parcheggio cancello direttamente
             If EgtIsPart(nId) Then
+               '---------------------- COUNTER PART ----------------------
+               Dim sRefGroup As String = String.Empty
+               ' recupero l'GUID del gruppo 
+               EgtGetInfo(nId, INFO_REFGROUP, sRefGroup)
+               '---------------------- COUNTER PART ----------------------
                ' Eventuale notifica al VeinMatching
                VeinMatching.OnRemovePart(nId, False)
                ' Rimuovo le lavorazioni
                EraseMachinings(nId)
                ' Cancello
                EgtErase(nId)
-            ' Altrimenti pezzo nel grezzo
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio (se sRefGroup<>"")
+               CountPartInFamily(sRefGroup)
+               ' Altrimenti pezzo nel grezzo
             ElseIf EgtGetParent(nId) = EstCalc.GetRawId() Then
                If EgtRemovePartFromRawPart(nId) Then
                   ' Eventuale notifica al VeinMatching
@@ -1169,6 +1537,17 @@ Public Class NestingTabVM
 #Region "EVENTS"
 
    Friend Sub OnMouseDownScene(sender As Object, e As Windows.Forms.MouseEventArgs)
+      ' se in modalità DragRettangle (deformazione delle componenti rettangolari)
+      If m_bDragRettangle Then
+         OnMyMouseDownSceneSelSideRettangle(sender, e)
+         ' Dati per drag (abilito il Drag)
+         m_locPrev = e.Location
+         m_bDrag = EgtUnProjectPoint(e.Location, m_ptPrev) And m_nIdSelectedCurvRettangle <> GDB_ID.NULL
+         m_bDragToStart = m_bDrag
+         m_bVerify = m_bDrag AndAlso (Keyboard.Modifiers And ModifierKeys.Shift) > 0
+         m_vtTotMove = Vector3d.NULL()
+         Return
+      End If
       ' Per default no drag
       m_bDrag = False
       ' Verifico se selezionato indicativo di pezzo
@@ -1183,13 +1562,35 @@ Public Class NestingTabVM
          If EgtIsPart(nPartId) Or bPartInTable Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nPartId, nStat)
-            ' Se già selezionato
-            If nStat = GDB_ST.SEL Then
-               ' Memorizzo Id da deselezionare
-               m_nIdToDesel = nPartId
-            Else
-               ' Memorizzo Id da selezionare
-               m_nIdToSel = nPartId
+
+            ' verifico se l'lemento selezionato è il numero di pezzi
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT Then
+               Dim NameLayer As String = String.Empty
+               EgtGetName(EgtGetParent(nId), NameLayer)
+               If NameLayer = INFO_COUNTERLY Then
+                  Dim sText As String = String.Empty
+                  If EgtTextGetContent(nId, sText) Then
+                     Dim sItems() As String = sText.Split("#")
+                     If sItems.Count > 1 Then
+                        m_nCurrNubrOfParts = 0
+                        If StringToInt(sItems(1), m_nCurrNubrOfParts) Then
+                           m_bIsCounterLy = True
+                           m_nIdToSel = nPartId
+                        End If
+                     End If
+                  End If
+               End If
+            End If
+
+            If Not m_bIsCounterLy Then
+               ' Se già selezionato o posizione oggetto incompatibile con flag posizione selezionati
+               If nStat = GDB_ST.SEL Then
+                  ' Memorizzo Id da deselezionare
+                  m_nIdToDesel = nPartId
+               Else
+                  ' Memorizzo Id da selezionare
+                  m_nIdToSel = nPartId
+               End If
             End If
             ' Drag possibile
             m_bDrag = True
@@ -1216,6 +1617,13 @@ Public Class NestingTabVM
          End If
          m_bDragToStart = False
       End If
+
+      ' se devo muovere un lato del rettangolo
+      If m_bDragRettangle Then
+         OnMyMouseMoveSawRettangle(sender, e)
+         Return
+      End If
+
       ' Determino cosa muovere
       Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
       ' Verifico se in tavola o in parcheggio
@@ -1235,7 +1643,20 @@ Public Class NestingTabVM
          Dim b3Ins As new BBox3d
          EgtGetBBoxGlob( EgtGetFirstNameInGroup( nTestId, NAME_REGION), BBFLAG, b3Ins)
          Dim vtDiff As new Vector3d( b3Curr.Min().x - b3Ins.Min().x, b3Curr.Min().y - b3Ins.Min().y, 0)
-         EgtMove( nMoveId, vtDiff)
+         EgtMove(nMoveId, vtDiff)
+
+         '---------------------- COUNTER PART ----------------------
+         ' aggiorno contatore pezzi
+         Dim sRefGroup As String = String.Empty
+         If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
+            ' spengo il layer che contiene il contatore
+            Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
+            EgtSetStatus(nCounterLayer, GDB_ST.OFF)
+            ' aggiorno il layer che indica il numero di pezzi in parcheggio
+            CountPartInFamily(sRefGroup)
+         End If
+         '---------------------- COUNTER PART ----------------------
+
          ' Gestione VeinMatching
          VeinMatching.OnInsertPartInRaw( nMoveId)
          ' Imposto stato
@@ -1304,6 +1725,11 @@ Public Class NestingTabVM
    End Sub
 
    Friend Sub OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      If m_bDragRettangle Then
+         ' deseleziono gli oggeti, resetto le variabili usate, aggiorno il disegno
+         ResetDragRettangleParam()
+         Return
+      End If
       ' Se eseguito drag
       If Not m_bDragToStart Then
          ' Se movimento con sola verifica finale
@@ -1335,13 +1761,35 @@ Public Class NestingTabVM
                      VeinMatching.OnMovePartInRaw(nMoveId)
                   End If
                End If
+               '---------------------- COUNTER PART ----------------------
+               Dim sRefGroup As String = String.Empty
+               If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
+                  ' accendo il layer che contiene il contatore (spento in fase di Drag)
+                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
+                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
+                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
+                  CountPartInFamily(sRefGroup)
+               End If
+               '---------------------- COUNTER PART ----------------------
             End If
             m_bFromParking = False
-         ' altrimenti caso con verifica durante il movimento
+            ' altrimenti caso con verifica durante il movimento
          Else
             ' Basta reset alla fine
          End If
-      ' Se selezione da eseguire
+
+         ' se è stato selezionato il layer del contatore mostro la finsetra
+      ElseIf m_bIsCounterLy Then
+         ' devo csotruire la finestra per la selezione del numero di pezzi da muovere
+         ' apro una finestra di dialogo per chiedere se inserire tutti i pezzi della famiglia
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(m_nIdToSel, INFO_REFGROUP, sRefGroup)
+         Dim DataContextSlectWD As New MultiSelectionVM(m_nCurrNubrOfParts, sRefGroup)
+         Dim SelectWD As MultiSelectionV = New MultiSelectionV(Application.Current.MainWindow, DataContextSlectWD)
+         DataContextSlectWD.SetMultiSelectionV(SelectWD)
+         m_bIsCounterLy = False
+
+         ' Se selezione da eseguire
       ElseIf m_nIdToSel <> GDB_ID.NULL Then
          ' Determino se pezzo in tavola o in parcheggio
          Dim bPartInTable As Boolean = (EgtGetParent(m_nIdToSel) = GetRawId())
@@ -1358,7 +1806,7 @@ Public Class NestingTabVM
          VeinMatching.OnSelectPart(m_nIdToSel)
          ' Set flag posizione selezionati
          m_nPartPos = If(bPartInTable, PART_POS.IN_TABLE, PART_POS.OUT_TABLE)
-      ' Se deselezione da eseguire
+         ' Se deselezione da eseguire
       ElseIf m_nIdToDesel <> GDB_ID.NULL Then
          EgtDeselectObj(m_nIdToDesel)
          ' Eventuale aggiornamento VeinMatching
@@ -1414,3 +1862,48 @@ Public Class NestingTabVM
 #End Region    ' EVENTS
 
 End Class
+
+Class FamilyPart
+
+   Private PtMinStoraged As Point3d
+   Private PtMaxStoraged As Point3d
+
+   Private m_nHText As Integer = 40
+   Public ReadOnly Property nHText As Double
+      Get
+         Return m_nHText
+      End Get
+   End Property
+
+   Private m_sRefGuid As String = String.Empty
+   Public ReadOnly Property sRefGuid As String
+      Get
+         Return m_sRefGuid
+      End Get
+   End Property
+
+   Private m_nIdPart As Integer = -1
+   Public ReadOnly Property nIdPart As Integer
+      Get
+         Return m_nIdPart
+      End Get
+   End Property
+
+   Private m_IdCounterText As Integer
+   Public ReadOnly Property IdCounterText As Integer
+      Get
+         Return m_IdCounterText
+      End Get
+   End Property
+
+   Public Function PtStorage() As Point3d
+      EgtGetBBoxGlob(m_nIdPart, GDB_BB.STANDARD, PtMinStoraged, PtMaxStoraged)
+      Return PtMinStoraged
+   End Function
+
+   Sub New(Guid As String, IdPart As Integer)
+      m_sRefGuid = Guid
+      m_nIdPart = IdPart
+   End Sub
+
+End Class

OptionPanel/RawPartTab/RawPartTabV.xaml

@@ -129,7 +129,7 @@
                              Margin="13,0,0,5"
                              IsEnabled="{Binding OffsetYIsEnabled}" TextAlignment="Right"/>
       <TextBlock Text="{Binding KerfMsg}"/>
-      <EgtWpfLib5:EgtTextBox Text="{Binding Kerf}"
+      <EgtWpfLib5:EgtTextBox Text="{Binding Kerf, UpdateSourceTrigger=PropertyChanged}"
                              Margin="13,0,0,5"
                              IsEnabled="{Binding KerfIsEnabled}" TextAlignment="Right"/>
 

OptionPanel/RawPartTab/RawPartTabVM.vb

@@ -223,6 +223,8 @@ Public Class RawPartTabVM
       End Set
    End Property
 
+#Region "Parametri Grezzo"
+
    Private m_dLength As Double
    Public Property Length As String
       Get
@@ -388,7 +390,7 @@ Public Class RawPartTabVM
             RecalcRawPart()
          ElseIf m_InvertKerf < 0 And dOffsetX >= 0 And dOffsetX < dMaxOffsetX + m_dKerf Then
             OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
-            m_dOffsetX = dOffsetX + m_dKerf
+            m_dOffsetX = dOffsetX
             RecalcRawPart()
          ElseIf dOffsetX <= dMinOffsetX - EPS_SMALL Then
             NotifyPropertyChanged("OffsetX")
@@ -453,7 +455,7 @@ Public Class RawPartTabVM
             RecalcRawPart()
          ElseIf m_InvertKerf < 0 And dOffsetY >= 0 And dOffsetY < dMaxOffsetY + m_dKerf Then
             OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
-            m_dOffsetY = dOffsetY + m_dKerf
+            m_dOffsetY = dOffsetY
             RecalcRawPart()
          ElseIf dOffsetY <= dMinOffsetY - EPS_SMALL Then
             NotifyPropertyChanged("OffsetY")
@@ -496,6 +498,7 @@ Public Class RawPartTabVM
       End Set
    End Property
 
+   Private m_PrecKerf As Double = 1
    Private m_InvertKerf As Double = 1
    Public ReadOnly Property InvertKerf As Double
       Get
@@ -516,6 +519,12 @@ Public Class RawPartTabVM
          Dim dKerf As Double = 0
          Dim dMaxKerf As Double = Math.Min(Math.Min(m_dOffsetX, m_dOffsetY),
                   Math.Min(m_dTableLength - m_dLength - m_dOffsetX, m_dTableWidth - m_dWidth - m_dOffsetY))
+         ' recuper il segno del valore del Kerf precedente
+         Dim dInvertKerf As Double = 1
+         EgtGetInfo(EgtGetFirstRawPart(), KEY_INVERT_KERF, dInvertKerf)
+         m_PrecKerf = Math.Abs(m_dKerf)
+         m_PrecKerf = m_PrecKerf * dInvertKerf
+
          ' carcio di dati della lastra letti da intrfaccia
          Dim dRawLength, dRawWidth, dRawOffsetX, dRawOffsetY As Double
          If Not StringToLen(Length, dRawLength) Then Return
@@ -526,9 +535,22 @@ Public Class RawPartTabVM
          If Not StringToLen(value, dKerf) Then
             Return
          End If
+
+         ' interrompo il processo di caricamento dati se il valore della TexBox è lo stesso della calsse
+         If dKerf * dInvertKerf = m_dKerf Then Return
+
          If dKerf >= 0 And dKerf < dMaxKerf + EPS_SMALL Then
             OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
             If GetRawMode() <> RAWMODE.FROM_PHOTO Then
+               If m_PrecKerf < 0 Then
+                  ' definsco la dimensione del grezzo pari a quella del kerf
+                  m_dKerf = 0
+                  AdjustRawPartNegativeKerf()
+                  UpdateCircles()
+                  UpdateRawPartKerf()
+                  m_dKerf = dKerf
+                  m_PrecKerf = 0
+               End If
                ' Specifico che si tratta di un Kerf negativo (per interfaccia grafica)
                EgtSetInfo(EstCalc.GetRawId(), KEY_INVERT_KERF, 1)
                SetInvertKerf(1)
@@ -554,14 +576,37 @@ Public Class RawPartTabVM
                EgtSetInfo(EstCalc.GetRawId(), KEY_INVERT_KERF, -1)
                SetInvertKerf(-1)
                ' aggiorno dati grezzo (partendo dalle dimensioni esterne del grezzo)
-               m_dLength = dRawLength + 2 * dKerf
-               m_dWidth = dRawWidth + 2 * dKerf
-               m_dOffsetX = dRawOffsetX - dKerf
-               m_dOffsetY = dRawOffsetY - dKerf
+               If m_PrecKerf >= 0 Then
+                  m_dLength = dRawLength + 2 * dKerf
+                  m_dWidth = dRawWidth + 2 * dKerf
+                  m_dOffsetX = dRawOffsetX - dKerf
+                  m_dOffsetY = dRawOffsetY - dKerf
+               End If
                m_dKerf = -dKerf
+               If m_PrecKerf >= 0 Then
+                  ' definsco la dimensione del grezzo pari a quella del kerf
+                  m_dKerf = 0
+                  AdjustRawPartNegativeKerf(False)
+                  EgtDraw()
+                  UpdateCircles()
+                  EgtDraw()
+                  UpdateRawPartKerf()
+                  EgtDraw()
+                  m_dKerf = -dKerf
+                  m_PrecKerf = 0
+               End If
+               If Not AdjustRawPartNegativeKerf() Then
+                  ' se fallisce la generazione (TEMPORANEAMENTE) ripristino l'ultimo valore inserito (vedi riga sopra)!
+                  m_dKerf = 0
+                  NotifyPropertyChanged("Kerf")
+               End If
+               EgtDraw()
+               UpdateCircles()
+               EgtDraw()
                ' RecalcRawPart()
                'EstCalc.UpdateRawPart()
-               UpdateRawPartKerf()
+               'UpdateRawPartKerf()
+
                ' Recupero id contorno kerf
                Dim nKerfId As Integer = EgtGetFirstNameInGroup(EstCalc.GetRawId(), NAME_KERF)
                ' Modifico il colore
@@ -601,6 +646,8 @@ Public Class RawPartTabVM
       End Set
    End Property
 
+#End Region  ' Parametri Grezzo
+
    Public ReadOnly Property MaterialList As ObservableCollection(Of Material)
       Get
          Return CurrentMachine.Materials
@@ -1079,6 +1126,8 @@ Public Class RawPartTabVM
       ElseIf dRawKerf > Math.Min(m_dTableLength, m_dTableWidth) / 5 Then
          dRawKerf = Math.Min(m_dTableLength, m_dTableWidth) / 5
       End If
+      ' assegno il valore del Kerf corrente
+      m_PrecKerf = dRawKerf
       If dRawLen < 0 Then
          dRawLen = 100
       ElseIf dRawLen > m_dTableLength - 2 * dRawKerf Then
@@ -1307,6 +1356,52 @@ Public Class RawPartTabVM
       Return True
    End Function
 
+   ' -------------------------------- INIZIO Nuove funzioni per la gestione del Kerf negativo --------------------------------
+
+   Private Function AdjustRawPartNegativeKerf(Optional NegativeOffset As Boolean = True) As Boolean
+      ' Se non c'è il grezzo, esco
+      If EstCalc.GetRawId() = GDB_ID.NULL Then Return False
+      ' Cancello eventuale vecchio contorno di kerf
+      Dim nKerfId As Integer = EgtGetFirstNameInGroup(EstCalc.GetRawId(), NAME_KERF)
+      Dim nInvert As Double = 1
+      If Not NegativeOffset Then
+         nInvert = -1
+      End If
+      Dim dOffset As Double = (-m_dKerf - m_PrecKerf) * nInvert
+      EgtSaveFile("c:\EgtData\OmagOFFICE\Temp\Error.nge", NGE.TEXT)
+      Dim nCount As Integer = 0
+      Dim bOK As Boolean = EgtOffsetCurve(nKerfId, dOffset, OFF_TYPE.EXTEND)
+      EgtSetColor(nKerfId, m_KerfCol)
+      ' ------ Gestione corretta dei kerf ------
+      'Dim nNewKerfId As Integer = EgtOffsetCurveAdv(nKerfId, dOffset, OFF_TYPE.EXTEND, nCount)
+      'EgtSetColor(nNewKerfId, m_KerfCol)
+      'EgtSetName(nNewKerfId, "Kerf")
+      'EgtErase(nKerfId)
+      '-----------------------------------------
+      ' Salvo il valore del kerf (sempre in mm)
+      EgtSetInfo(EstCalc.GetRawId(), KEY_KERF, m_dKerf)
+      Return bOK
+   End Function
+
+   Private Function AdjustRawPartPositionNegativeKerf() As Boolean
+      ' Sistemo la posizione
+      Dim ptRef As New Point3d(m_dOffsetX, m_dOffsetY, CurrentMachine.dAdditionalTable)
+      If EgtMoveToCornerRawPart(EstCalc.GetRawId(), ptRef, MCH_CR.BL) Then
+         ' Parametro ereditato da OmagCUT
+         ' OkBtn.IsEnabled = True
+         OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+      Else
+         ' OkBtn.IsEnabled = False
+         Dim sMsg As String = EgtMsg(MSG_RAWPARTPAGEUC + 47)
+         OmagOFFICEMap.refStatusBarVM.SetOutputMessage(sMsg, 3, MSG_TYPE.ERROR_)      ' Errore nella posizione o dimensione del grezzo
+      End If
+      ' Aggiorno visualizzazione
+      EgtZoom(ZM.ALL)
+      Return True
+   End Function
+
+   ' -------------------------------- FINE Nuove funzioni per la gestione del Kerf negativo --------------------------------
+
    Private Sub UpdateRawPartHeight()
       ' Se da creare
       If EstCalc.GetRawId() = GDB_ID.NULL Then
@@ -1583,8 +1678,11 @@ Public Class RawPartTabVM
    End Sub
 
    Private Sub AdjustRawPartOnExit()
-      ' Se non c'è il grezzo, esco
-      If EstCalc.GetRawId() = GDB_ID.NULL Then Return
+      ' Se non c'è il grezzo, esco dopo aver nascosto eventuale foto
+      If EstCalc.GetRawId() = GDB_ID.NULL Then
+         ShowPhoto(False)
+         Return
+      End If
       ' Disabilito impostazione modificato
       Dim bOldEnMod = EgtGetEnableModified()
       If bOldEnMod Then EgtDisableModified()

SideEntityControl/SideEntityControlVM.vb

@@ -469,6 +469,7 @@ Public Class SideEntityControlVM
          Parameter23_Visibility = Windows.Visibility.Hidden
          Parameter2_Visibility = Visibility.Visible
          Parameter2ab_Visibility = Visibility.Hidden
+         Parameter4_Visibility = Visibility.Hidden
       ElseIf m_Mode = ModeOpt.FILOTOP Then
          Parameter23_Visibility = Windows.Visibility.Hidden
          Parameter2_Visibility = Visibility.Visible
@@ -795,6 +796,13 @@ Public Class SideEntityControlVM
          NewEntity.SetbIsCheckedAlz(False)
          NewEntity.SetbIsCheckedFront(False)
       End If
+      ' inserisco riferimento univoco al lato (solo se non esiste)
+      Dim sInfoRef As String = String.Empty
+      EgtGetInfo(CurrLine, "RefAF", sInfoRef)
+      If String.IsNullOrEmpty(sInfoRef) Then
+         Dim sRefGUID As String = System.Guid.NewGuid().ToString()
+         EgtSetInfo(CurrLine, "RefAF", sRefGUID)
+      End If
       EgtSetInfo(NewEntity.nGeomId, "IsModify", 0)
       m_SideEntityList.Add(NewEntity)
       NotifyPropertyChanged("Legenda_Visibility")
@@ -1020,6 +1028,8 @@ Public Class SideEntityControlVM
          End If
       Next
 
+      If vJoint.Count < 1 Then Return
+
       If vJoint(0) And vJoint(vJoint.Count - 1) Then
          bJointStart = True
       End If