Salvo dimensione sovratavola per ogni macchinata

- correzione versione.

Constants/ConstIni.vb

@@ -18,6 +18,7 @@ Module ConstIni
    Public Const S_GENERAL As String = "General"
    Public Const K_DEBUG As String = "Debug"
    Public Const K_LICENCE As String = "Licence"
+   Public Const K_NETKEY As String = "NetKey"
    Public Const K_USERLEVEL As String = "UserLevel"
    Public Const K_MAXINST As String = "MaxInstances"
    Public Const K_INSTANCES As String = "Instances"

EgtStoneLib/CamAuto.vb

@@ -99,6 +99,9 @@ Friend Module CamAuto
       Dim bOk As Boolean = True
       Dim nIdPart As Integer = EgtGetFirstPart()
       While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, "AUX_SPLIT_WJ")
+         EgtErase(IdAuxLayer)
          ' accedo al Layer OutLoop
          Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
          Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
@@ -111,6 +114,9 @@ Friend Module CamAuto
       Dim nRawId As Integer = CamAuto.GetCurrentRaw()
       nIdPart = EgtGetFirstPartInRawPart(nRawId)
       While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, "AUX_SPLIT_WJ")
+         EgtErase(IdAuxLayer)
          ' accedo al Layer OutLoop
          Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
          Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
@@ -123,6 +129,40 @@ Friend Module CamAuto
       Return bOk
    End Function
 
+   Friend Function ResetAllStartCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, "Start")
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, "Start")
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   ' verifico che il contorno passato non sia stato separato
+   Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer) As Boolean
+      Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+      While nIdMy <> GDB_ID.NULL
+         Dim nValInfo As Integer = 1
+         If EgtGetInfo(nIdMy, "JoinEntity", nValInfo) Then
+            If nValInfo = 0 Then Return False
+         End If
+         EgtRemoveInfo(nIdMy, "JoinEntity")
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return True
+   End Function
+
    Friend Function RemoveFinalEmptyPhases() As Boolean
       Dim nOpeId As Integer = EgtGetLastOperation()
       While nOpeId <> GDB_ID.NULL

EgtStoneLib/ConstMach.vb

@@ -251,6 +251,12 @@ Module ConstMach
    Public Const SELECT_REGION_LAYER As String = "SelectRegion"
    ' Info in pezzo per stato rotazione
    Public Const INFO_PARTROT As String = "ROT"
+   ' Info in entità in OutLoop per indicare se è separata WaterJet
+   Public Const INFO_JOINTENTITY As String = "JoinEntity"
+   ' Nome layer per "*" inidcanti un lato separato nel taglio WaterJet
+   Public Const INFO_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
+   ' Info in OutLoop per punto inzio lavorazione WaterJet
+   Public Const INFO_START As String = "Start"
 
    ' Nome di pezzo che è una cornice
    Public Const NAME_FRAME As String = "Frame"

MainWindow/MainWindowM.vb

@@ -192,6 +192,8 @@ Public Class MainWindowM
       Dim sNestKey As String = ""
       EgtUILib.GetPrivateProfileString( S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
       EgtSetNestKey( sNestKey)
+      Dim bNetHwKey As Boolean = ( GetMainPrivateProfileInt(S_GENERAL, K_NETKEY, 0) = 1)
+      EgtSetNetHwKey( bNetHwKey)
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace( sNestKey)
       ' Recupero livello e opzioni della chiave

My Project/AssemblyInfo.vb

@@ -69,6 +69,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.5.1")>
-<Assembly: AssemblyFileVersion("2.4.5.1")>
+<Assembly: AssemblyVersion("2.4.5.4")>
+<Assembly: AssemblyFileVersion("2.4.5.4")>
 

MyMachGroupPanel/MyMachGroupPanelVM.vb

@@ -250,7 +250,8 @@ Public Class MyMachGroupPanelVM
       LoadSlabsList(sSlabNameDB)
 
       ' imposto la visibilità dei comandi per il waterjet
-      OmagOFFICEMap.refNestingTabVM.Set_SplitCurvWJ_Visibility()
+      OmagOFFICEMap.refNestingTabVM.Set_WJ_Cmd_Visibility()
+
       Return True
    End Function
 

MySceneHost/MySceneHostVM.vb

@@ -223,6 +223,8 @@ Public Class MySceneHostVM
    End Sub
 
    Private Function ExecExport(sDirDest As String) As Boolean
+      ' salvo il nome della macchina correntemente selezionata
+      Dim CurrentSelectedMachGroup As String = OmagOFFICEMap.refMachGroupPanelVM.SelectedMachGroup.Machine
       ' Path completa del progetto corrente
       Dim sFilePath As String = String.Empty
       EgtGetCurrFilePath(sFilePath)
@@ -282,10 +284,10 @@ Public Class MySceneHostVM
                File.Copy(sOriPath, sNewPath, True)
             Catch ex As Exception
                bOk = False
-               EgtOutLog( "Slab image not found :" & sOriPath)
+               EgtOutLog("Slab image not found :" & sOriPath)
             End Try
             EgtSetName(nPhotoId, PHOTO_NAME)
-            EgtChangePhotoCenterAsFlatScan( nPhotoId)
+            EgtChangePhotoCenterAsFlatScan(nPhotoId)
          End If
          ' Elimino gli altri gruppi di lavorazioni 
          For Each nMGrpId As Integer In vMchGrps
@@ -308,6 +310,25 @@ Public Class MySceneHostVM
          Dim nMarkId As Integer = EgtCreateGroup(GDB_ID.ROOT)
          EgtSetName(nMarkId, NAME_PROJMARK)
          EgtSetLevel(nMarkId, GDB_LV.SYSTEM)
+         ' Imposto la macchina: salvo l'altezza della sovratavola
+         Dim sMachine As String = String.Empty
+         EgtGetInfo(nMchGrpId, "Machine", sMachine)
+         If Not String.IsNullOrEmpty(sMachine) Then
+            InitCurrentMachine(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, sMachine,
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.PRODUCTION_LINE),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_MILL),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_POLISHING),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_WJ),
+                         True)
+            Select Case GetCurrentTable()
+               Case 3
+                  EgtSetInfo(nMarkId, K_TAB3_ADDITIONALTABLE, CurrentMachine.dAdditionalTable)
+               Case 2
+                  EgtSetInfo(nMarkId, K_TAB2_ADDITIONALTABLE, CurrentMachine.dAdditionalTable)
+               Case Else
+                  EgtSetInfo(nMarkId, K_ADDITIONALTABLE, CurrentMachine.dAdditionalTable)
+            End Select
+         End If
          Dim nReducedCut As Integer = 1
          EgtGetInfo(nMchGrpId, INFO_REDUCEDCUT, nReducedCut)
          EgtSetInfo(nMarkId, INFO_REDUCEDCUT, nReducedCut)
@@ -326,6 +347,13 @@ Public Class MySceneHostVM
          ' Salvo il file
          If Not EgtSaveFile(sFileDest, NGE.CMPTEXT) Then bOk = False
       Next
+      ' reimposto la macchina corrente
+      InitCurrentMachine(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, CurrentSelectedMachGroup,
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.PRODUCTION_LINE),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_MILL),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_POLISHING),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_WJ),
+                         True)
       ' Distruggo il contesto corrente e ripristino quello originale
       EgtSetCurrentContext(nCurrCtx)
       EgtDeleteContext(nCtx)

OptionPanel/MachiningTab/MachiningTabVM.vb

@@ -224,13 +224,17 @@ Public Class MachiningTabVM
    End Property
 
    Public Sub Prev(ByVal param As Object)
+      Dim bOk As Boolean = True
       ' Dichiaro solo visualizzazione
       m_bIsShow = True
       If m_MachiningMode = MachiningModeOpt.SPLIT Then
          OmagOFFICEMap.refSplitModeVM.ExitSplitRaw(False)
       Else
-         OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
+         ' verifico collisione dei pezzi in fase di scarico
+         bOk = OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
       End If
+      ' se trovata interferenza tra grezzi (dopo movimentazione) esco
+      If Not bOk Then Return
       ' Torno alla fase precedente
       EgtSetCurrPhase(EgtGetCurrPhase() - 1)
       ' Si va sempre in Split
@@ -255,19 +259,22 @@ Public Class MachiningTabVM
    End Property
 
    Public Sub NextCmd(ByVal param As Object)
+      Dim bOk As Boolean = True
       If m_MachiningMode = MachiningModeOpt.SPLIT Then
          OmagOFFICEMap.refSplitModeVM.ExitSplitRaw(False)
          MachiningMode = MachiningModeOpt.MOVERAWPART
          AutoVisibility = Visibility.Hidden
-         OmagOFFICEMap.refMoveRawModeVM.InitMoveRaw()
+         bOk = OmagOFFICEMap.refMoveRawModeVM.InitMoveRaw()
       Else
-         OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
+         ' se verificata una interferenza allora esco
+         bOk = OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
+         If Not bOk Then Return
          MachiningMode = MachiningModeOpt.SPLIT
          AutoVisibility = Visibility.Visible
          OmagOFFICEMap.refSplitModeVM.InitSplitRaw()
       End If
-      ' Aggiorno possibilità di uscire
-      ManageExit()
+      ' Se non ci sono interferenze tra i grezzi -> aggiorno possibilità di uscire
+      If bOk Then ManageExit()
    End Sub
 
 #End Region ' NextCommand

OptionPanel/MachiningTab/MoveRawModeVM.vb

@@ -17,6 +17,7 @@ Public Class MoveRawModeVM
    Private m_bRemovedRaw As Boolean = False                 ' flag per rimozione manuale pezzi
    Private m_RawMoveDataList As New List(Of RawMoveData)    ' dati di movimento
    Private m_bRawWithCups As Boolean = False                ' flag per pezzo corrente con ventose
+   Private m_CurrRawOnVacuum As Integer = GDB_ID.NULL       ' identificativo pezzo correntemente attaccato alle ventose
 
    Private m_dMoveStep As Double
    Public Property MoveStep As String
@@ -108,6 +109,17 @@ Public Class MoveRawModeVM
 #Region "METHODS"
 
    Friend Function InitMoveRaw() As Boolean
+      '' verifico che il pezzo sia depositabile
+      'If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+      '   ' mantengo la selezione del pezzo
+      '   EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+      '   OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+      '   EgtDraw()
+      '   ' non cambio pagina
+      '   Return False
+      'End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Recupero i tagli allungati prima definiti
@@ -158,14 +170,14 @@ Public Class MoveRawModeVM
                ' Distanza iniziale
                m_dCurrDist = 0
             End If
-         ' Non dovrebbe mai accadere, ma inizializzo con default
+            ' Non dovrebbe mai accadere, ma inizializzo con default
          Else
             m_vtDir = Vector3d.Y_AX()
             m_ptMid = Point3d.ORIG()
             m_dOrigDist = 0
             m_dCurrDist = 0
          End If
-      ' Altrimenti movimento con ventose
+         ' Altrimenti movimento con ventose
       Else
          m_bRemovedRaw = False
          m_bRawWithCups = False
@@ -182,7 +194,7 @@ Public Class MoveRawModeVM
       If OmagOFFICEMap.refMachiningTabVM.ByHand Then
          LRArrowVisibility = Visibility.Hidden
          RotationVisibility = Visibility.Hidden
-      ' Altrimenti per movimento con ventose
+         ' Altrimenti per movimento con ventose
       Else
          LRArrowVisibility = Visibility.Visible
          RotationVisibility = If(CurrentMachine.bRawSplMovRotate, Visibility.Visible, Visibility.Hidden)
@@ -195,6 +207,17 @@ Public Class MoveRawModeVM
    End Function
 
    Friend Function ExitMoveRaw() As Boolean
+      ' verifico che il pezzo sia depositabile
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+         EgtDraw()
+         ' non cambio pagina
+         Return False
+      End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Se movimento con ventose
@@ -351,6 +374,39 @@ Public Class MoveRawModeVM
       Return bOk
    End Function
 
+   ' Veririfica che il grezzo non entri in colliosione con altri pezzi 
+   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer) As Boolean
+      If nIdOnVacumm = GDB_ID.NULL Then Return False
+      ' Creo gruppo temporaneo in cui generare le superfici per la veririfica di collisione
+      Dim m_nTempId As Integer = EgtCreateGroup(GDB_ID.ROOT)
+      If m_nTempId = GDB_ID.NULL Then Return False
+      EgtSetName(m_nTempId, "RawTemp")
+      Dim nIdActualRawOutLine As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawOutline")
+      Dim ActualRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdActualRawOutLine)
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      Dim nRawGroupId = EgtGetParent(EgtGetFirstRawPart())
+      Dim nIdRaw As Integer = EgtGetFirstRawPart()
+      ' ciclo su tutti i grezzi per veririficare eventuali collisioni
+      While nIdRaw <> GDB_ID.NULL
+         ' verifico la fase del grezzo
+         If EgtVerifyRawPartCurrPhase(nIdRaw) And nIdOnVacumm <> nIdRaw Then
+            ' recupero il contorno del pezzo
+            Dim nIdRawOutLine As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawOutline")
+            Dim nIdRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdRawOutLine)
+            If EgtSurfFrIntersect(nIdRawFlatRegion, ActualRawFlatRegion) Then
+               If EgtExistsObj(nIdRawFlatRegion) Then
+                  EgtErase(m_nTempId)
+                  ' esiste una intersezione delle superfici
+                  Return True
+               End If
+            End If
+         End If
+         nIdRaw = EgtGetNextRawPart(nIdRaw)
+      End While
+      EgtErase(m_nTempId)
+      Return False
+   End Function
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -685,12 +741,34 @@ Public Class MoveRawModeVM
          ' Se trovato il grezzo
          If nParentId = nRawGroupId Then
             Dim nStat As Integer = GDB_ST.ON_
+            ' Se il pezzo corrente è selezionato allora lo disattivo -> deposito del pezzo
             EgtGetStatus(nId, nStat)
             If nStat = GDB_ST.SEL Then
                EgtSetStatus(nId, GDB_ST.ON_)
-               ' Se con ventose, le nascondo
-               If Not OmagOFFICEMap.refMachiningTabVM.ByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola
+               If VerifyCollisionWithOtherRawPart(nId) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(nId, GDB_ST.SEL)
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+               Else
+                  ' Se con ventose, le nascondo
+                  If Not OmagOFFICEMap.refMachiningTabVM.ByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               End If
+
             Else
+
+               ' verifico che il pezzo precedente possa essere depositato correttamente
+               If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+                  EgtDraw()
+                  ' esco dal ciclo, prima devo depositare correttamente il pezzo
+                  Exit While
+               End If
+               ' salvo l'indice del pezzo correntemente attaccato alle ventose
+               m_CurrRawOnVacuum = nId
+
                EgtDeselectAll()
                EgtSetStatus(nId, GDB_ST.SEL)
                ' Se con ventose, le posiziono sul grezzo
@@ -736,6 +814,15 @@ Public Class MoveRawModeVM
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+
+      ' clicco su un oggetto che non è un grezzo -> verifico che il pezzo precedente possa essere depositato correttamente
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+         EgtDraw()
+      End If
+
    End Sub
 
 #End Region    ' EVENTS

OptionPanel/MachiningTab/SplitModeVM.vb

@@ -797,6 +797,15 @@ Public Class SplitModeVM
       vtXY.Normalize()
       Dim ptCen As Point3d = Point3d.Media(ptMin, ptMax) + vtXY * If(Not b2ndLav, -0.8, 0.8) * dHtxt
       ptCen.z = ptMax.z + 1
+
+      ' ricavo la posizione del punto (se waterjet separata)
+      If m_MachiningList(nI).m_nType = MCH_OY.WATERJETTING Or m_MachiningList(nI).m_nType = MCH_OY.MILLING Then
+         Dim ptMid As Point3d
+         Dim vVers As Vector3d
+         MidPointOfCurve(m_MachiningList(nI).m_nId, ptMid, vVers)
+         ptCen = ptMid ' + vVers * If(Not b2ndLav, -0.8, 0.8) * dHtxt
+      End If
+
       If bNumber Then
          Dim nNbrId As Integer = EgtCreateTextAdv(m_nNbrGrpId, ptCen, 0, (nI + 1).ToString(), "",
                                                    300, False, dHtxt, dRat, 0, INS_POS.MC)
@@ -851,6 +860,36 @@ Public Class SplitModeVM
       Return EgtGetBBoxGlob(nPvId, GDB_BB.STANDARD, ptMin, ptMax)
    End Function
 
+   Private Function MidPointOfCurve(nOperId As Integer, ByRef ptMid As Point3d, ByRef vVers As Vector3d) As Boolean
+      Dim nPvId As Integer = GDB_ID.NULL
+      EgtGetInfo(EgtGetFirstNameInGroup(nOperId, NAME_PREVIEW), INFO_PV_ONPART_ID, nPvId)
+      ' creo un layer ausiliario per creare la curva composita
+      Dim AuxLayer As Integer = EgtCreateGroup(nPvId)
+      ' imposto la lavorazione corrente
+      EgtSetCurrMachining(nOperId)
+      ' recupero tutte le entità della lavorazione corrente
+      Dim nInd As Integer = 0
+      Dim nIdCurr As Integer
+      Dim nSub As Integer
+      Dim CurveCompoList As New List(Of Integer)
+      While EgtGetMachiningGeometry(nInd, nIdCurr, nSub)
+         CurveCompoList.Add(nIdCurr)
+         nInd += 1
+      End While
+      Dim PtNearStart As Point3d
+      Dim nIdCutPath As Integer = EgtCreateCurveCompoByChain(AuxLayer, CurveCompoList.ToArray, PtNearStart, False)
+      Dim dLength As Double = 0
+      EgtCurveLength(nIdCutPath, dLength)
+      Dim dParam As Double = 0
+      EgtCurveParamAtLength(nIdCutPath, dLength / 2, dParam)
+      EgtAtParamPoint(nIdCutPath, dParam, GDB_RT.GLOB, ptMid)
+      EgtAtParamVector(nIdCutPath, dParam, -1, vVers)
+      vVers.Normalize()
+      vVers.Rotate(Vector3d.Z_AX, 90)
+      EgtErase(AuxLayer)
+      Return True
+   End Function
+
    Private Function AddMachiningDirection(ptStart As Point3d, vtDir As Vector3d, dLen As Double, bTwin As Boolean) As Integer
       Dim dArrX As Double = dLen * Math.Cos(30 * Math.PI / 180)
       Dim dArrY As Double = dLen * Math.Sin(30 * Math.PI / 180)

OptionPanel/NestingTab/NestingTabV.xaml

@@ -137,18 +137,23 @@
 
    </Border>
 
-   <UniformGrid Grid.Column="0" Columns="2" Margin="0,0,0,5">
-      <Button Content="{Binding InsertPartMsg}"
-              Style="{StaticResource OptionPanel_TextButton}"
-              Command="{Binding InsertPartCommand}"
-              Margin="0,0,2.5,0"/>
-      <Button Content="{Binding StorePartMsg}"
-              Style="{StaticResource OptionPanel_TextButton}"
-              Command="{Binding StorePartCommand}"
-              Margin="2.5,0,0,0"/>
+    <UniformGrid Grid.Column="0" Columns="2" Margin="0,0,0,5">
+        <Button Content="{Binding InsertPartMsg}"
+                Style="{StaticResource OptionPanel_TextButton}"
+                Command="{Binding InsertPartCommand}"
+                Margin="0,0,2.5,0"/>
+        <Button Content="{Binding StorePartMsg}" Grid.Column="1"
+                Style="{StaticResource OptionPanel_TextButton}"
+                Command="{Binding StorePartCommand}"
+                Margin="2.5,0,0,0"/>
+        <!--<ToggleButton Content="{Binding StartCurvWJMsg}" Grid.Column="2"
+                Visibility="{Binding StartCurvWJ_Visibility}"         
+                Style="{StaticResource OptionPanel_ToggleButton}"
+                IsChecked="{Binding bStartCurvWJ}"
+                Margin="2.5,0,2.5,0"/>-->
    </UniformGrid>
 
-    <UniformGrid Grid.Column="0" Columns="{Binding CountColumn}" Margin="0,0,0,5">
+    <UniformGrid Grid.Column="0" Columns="{Binding CountColumn}"  Margin="0,0,0,5">
         <Button Content="{Binding RemovePartMsg}"
                 Style="{StaticResource OptionPanel_TextButton}"
                 Command="{Binding RemovePartCommand}"
@@ -158,13 +163,23 @@
                 Style="{StaticResource OptionPanel_ToggleButton}"
                 IsChecked="{Binding bDragRectangle}"
                 Margin="2.5,0,2.5,0"/>
-        <ToggleButton Content="{Binding SplitCurvWJMsg}" Grid.Column="2"
+        <!--<ToggleButton Content="{Binding SplitCurvWJMsg}" Grid.Column="2"
                 Visibility="{Binding SplitCurvWJ_Visibility}"         
                 Style="{StaticResource OptionPanel_ToggleButton}"
                 IsChecked="{Binding bSplitCurvWJ}"
-                Margin="2.5,0,2.5,0"/>
+                Margin="2.5,0,2.5,0"/>-->
     </UniformGrid>
 
+    <UniformGrid Grid.Column="0" Columns="2" Margin="0,0,0,5" Visibility="{Binding WJ_Cmd_Visibility}">
+        <ToggleButton Content="{Binding SplitCurvWJMsg}" Grid.Column="2"        
+                Style="{StaticResource OptionPanel_ToggleButton}"
+                IsChecked="{Binding bSplitCurvWJ}"
+                Margin="2.5,0,2.5,0"/>
+        <ToggleButton Content="{Binding StartCurvWJMsg}" Grid.Column="2"         
+                Style="{StaticResource OptionPanel_ToggleButton}"
+                IsChecked="{Binding bStartCurvWJ}"
+                Margin="2.5,0,2.5,0"/>
+    </UniformGrid>
    
    <UniformGrid Columns="2" Margin="0,0,0,5">
       <Button Content="{Binding SelectAllMsg}"

OptionPanel/NestingTab/NestingTabVM.vb

@@ -190,7 +190,15 @@ Public Class NestingTabVM
 
    Public ReadOnly Property SplitCurvWJMsg As String
       Get
-         Return "Split"
+         '91133=Separa
+         Return EgtMsg(91133)
+      End Get
+   End Property
+
+   Public ReadOnly Property StartCurvWJMsg As String
+      Get
+         '91132=Start
+         Return EgtMsg(91132)
       End Get
    End Property
 
@@ -597,7 +605,7 @@ Public Class NestingTabVM
                End If
                ' recupero il gruppo della lavorazione associata
                Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
-               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, "PV")
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
                ' se non esiste un gruppo di lavorazione associato allora esco
                If nIdPV = GDB_ID.NULL Then
                   'm_CurrProjPage.ClearMessage()
@@ -864,7 +872,11 @@ Public Class NestingTabVM
       Set(value As Boolean)
          m_bDragRectangle = value
          m_bSplitCurvWJ = False
+         ResetSplitCurvWJParam(True)
+         m_bStartCurvWJ = False
+         ResetStartCurvWJParam(True)
          NotifyPropertyChanged("bSplitCurvWJ")
+         NotifyPropertyChanged("bStartCurvWJ")
       End Set
    End Property
 
@@ -875,7 +887,7 @@ Public Class NestingTabVM
       End Get
    End Property
 
-#Region "WATERJET"
+#Region "WATERJET SPLIT CURVE"
 
    ' funzione per la selezione dei lati su cui operare la separazione del tagli waterjet
    Private Sub OnMyMouseDownSceneSplitCurv(sender As Object, e As System.Windows.Forms.MouseEventArgs)
@@ -905,26 +917,27 @@ Public Class NestingTabVM
                End If
                ' recupero il gruppo della lavorazione associata
                Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
-               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, "PV")
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
                ' VERIFICA: recupero l'elenco delle Preview di Tipo WaterJet associate a questo Part
                Dim ListGroup As List(Of Integer) = ResearchGropuWJ(nIdParent, nIdPV)
+               ' VERIFICA: se esistono delle lavorazioni associate al percorso OutLoop di tipo Saw allora non procedo
+               Dim ListGroupSaw As List(Of Integer) = ResearchGropuSaw(nIdParent, nIdPV)
                ' se non esiste almeno 1 Preview di tipo WaterJet
-               If ListGroup.Count > 0 Then
+               If ListGroup.Count > 0 And ListGroupSaw.Count = 0 Then
                   m_nIdSelectedSideWJ = nIdMy
                   Dim nValInfo As Integer = 1
-                  If EgtGetInfo(nIdMy, "JoinEntity", nValInfo) Then
+                  Dim nNewValInfo As Integer = nValInfo
+                  If EgtGetInfo(nIdMy, INFO_JOINTENTITY, nValInfo) Then
                      If nValInfo = 1 Then
-                        ' separo il taglio
-                        EgtSetInfo(nIdMy, "JoinEntity", 0)
+                        nNewValInfo = 0
                      Else
-                        ' unisco il taglio
-                        EgtSetInfo(nIdMy, "JoinEntity", 1)
+                        nNewValInfo = 1
                      End If
                   Else
                      ' se manca l'info allora il taglio sValInfo = "1" quindi separo il taglio
-                     EgtSetInfo(nIdMy, "JoinEntity", 0)
+                     nNewValInfo = 0
                   End If
-
+                  EgtSetInfo(nIdMy, INFO_JOINTENTITY, nNewValInfo)
                   ' Ricalcolo tutte le lavorazioni
                   Dim nWarn As Integer = 0
                   ResetAllMachinings(nWarn)
@@ -932,6 +945,12 @@ Public Class NestingTabVM
                   ListGroup = ResearchGropuWJ(nIdParent, nIdPV)
                   Dim nIdWJ As Integer = GetPVIdFromIdSide(ListGroup, nIdMy)
                   GetCurrentPVFromIdSide(ListGroup, nIdMy, nIdWJ, nIdParent)
+                  ' assegno un identificativo grafico per inidcare che è un taglio separato
+                  If nNewValInfo = 0 Then
+                     AssignFlagOnGraphic(nIdMy, nIdParentPart)
+                  Else
+                     EraseFlagOnGraphic(nIdMy, nIdParentPart)
+                  End If
                   ' salvo il valore del PreView evidenziato
                   m_nIdSelectedWaterJet = nIdWJ
                   EgtSetMark(nIdWJ)
@@ -966,6 +985,25 @@ Public Class NestingTabVM
       Return ListOfGroupPV
    End Function
 
+   ' restituisce l'elenco dei Gruppi Saw associati al contorno indicato
+   Public Function ResearchGropuSaw(nIdOutLoop As Integer, nIdPV As Integer) As List(Of Integer)
+      Dim ListOfGroupPV As New List(Of Integer)
+      Dim nIdGroup As Integer = GDB_ID.NULL
+      Dim nIdMy As Integer = GDB_ID.NULL
+      ' recupero il primo lato dall'elenco dei lati della figura
+      nIdMy = EgtGetFirstInGroup(nIdOutLoop)
+      ' altrimenti cerco all'interno del layer OutLoop per ogni lato la lavorazione associata
+      While nIdMy <> GDB_ID.NULL
+         ' verifico se esiste una Preview associata al lato
+         nIdGroup = EgtGetFirstNameInGroup(nIdPV, "Saw" & nIdMy.ToString)
+         If nIdGroup <> GDB_ID.NULL Then
+            ListOfGroupPV.Add(nIdGroup)
+         End If
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return ListOfGroupPV
+   End Function
+
    Public Function GetPVIdFromIdSide(ListGroup As List(Of Integer), nIdMy As Integer) As Integer
       Dim IdWaterjetPV As Integer = GDB_ID.NULL
       For Each nIdItem As Integer In ListGroup
@@ -1020,7 +1058,7 @@ Public Class NestingTabVM
          ' se arrivato al primo valore allora continuo la ricerca dall'ultimo
          If nIdWJPrev = GDB_ID.NULL Then nIdWJPrev = EgtGetLastInGroup(EgtGetParent(nIdMy))
          nCount += 1
-         EgtGetInfo(nIdWJPrev, "JoinEntity", nValInfo)
+         EgtGetInfo(nIdWJPrev, INFO_JOINTENTITY, nValInfo)
          If nValInfo = 1 Then
             nIdWj = GetPVIdFromIdSide(ListGroup, nIdWJPrev)
             If nIdWj <> GDB_ID.NULL Then Return
@@ -1034,11 +1072,70 @@ Public Class NestingTabVM
       End If
    End Sub
 
-   Public Sub ResetSplitCurvWJParam()
-      EgtDeselectObj(m_nIdSelectedSideWJ)
-      EgtResetMark(m_nIdSelectedWaterJet)
+   Public Sub ResetSplitCurvWJParam(Optional bAllParam As Boolean = True)
+      If bAllParam Then
+         EgtDeselectObj(m_nIdSelectedSideWJ)
+         EgtResetMark(m_nIdSelectedWaterJet)
+      End If
       m_nIdSelectedSideWJ = GDB_ID.NULL
       m_nIdSelectedWaterJet = GDB_ID.NULL
+      EgtDraw()
+   End Sub
+
+   ' ricevo l'ID del percorso di lavorazione WJ al quale associo una etichetta grafica con scritto "S"
+   Private Sub AssignFlagOnGraphic(nIdMy As Integer, IdParentPart As Integer)
+      ' cerco se esiste già un layer nominato "AUX_SPLIT_WJ", altrimenti lo creo
+      Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(IdParentPart, INFO_AUX_SPLIT_WJ)
+      If IdAuxLayer = GDB_ID.NULL Then
+         IdAuxLayer = EgtCreateGroup(IdParentPart)
+         EgtSetName(IdAuxLayer, INFO_AUX_SPLIT_WJ)
+      End If
+      ' recupero il punto medio del segmento selezionato
+      Dim MidPoint As Point3d
+      EgtMidPoint(nIdMy, GDB_RT.GLOB, MidPoint)
+      'Dim nIdTextFlag As Integer = EgtCreateText(IdAuxLayer, MidPoint, "*", 20, GDB_RT.GLOB)
+      Dim nIdTextFlag As Integer = GetCreateFlagText(nIdMy, IdAuxLayer)
+      EgtSetColor(nIdTextFlag, New Color3d(255, 0, 0))
+      EgtSetName(nIdTextFlag, "RefSide_" & nIdMy.ToString)
+   End Sub
+
+   Private Function GetCreateFlagText(nId As Integer, nIdLayer As Integer, Optional sText As String = "*") As Integer
+      ' recupero il punto medio
+      Dim MidPoint As Point3d
+      EgtMidPoint(nId, GDB_RT.GLOB, MidPoint)
+      ' recupero la direzione del vettore nel punto medio
+      Dim vVers As Vector3d
+      EgtMidVector(nId, GDB_RT.GLOB, vVers)
+      vVers.Normalize()
+      vVers.Rotate(Vector3d.Z_AX, 90)
+      ' Ingombro complessivo della lavorazione
+      Dim ptMin, ptMax As Point3d
+      EgtStartPoint(nId, GDB_RT.GLOB, ptMin)
+      EgtEndPoint(nId, GDB_RT.GLOB, ptMax)
+      ' Metto il numero nel centro
+      Dim dRadXY = Point3d.DistXY(ptMin, ptMax)
+      Dim dHtxt As Double = 50
+      Dim dRat As Double = 0.75
+      If dRadXY < 200 Then
+         dHtxt = 40
+         dRat = 0.6
+      ElseIf dRadXY < 25 Then
+         dHtxt = 25
+         dRat = 0.5
+      End If
+      ' determino la posizione del flag
+      MidPoint.x += vVers.x * dHtxt / 2
+      MidPoint.y += vVers.y * dHtxt / 2
+
+      Return EgtCreateTextAdv(nIdLayer, MidPoint, 0, sText, "", 300, False, dHtxt, dRat, 0, INS_POS.MC, GDB_RT.GLOB)
+   End Function
+
+   Private Sub EraseFlagOnGraphic(nIdMy As Integer, IdParentPart As Integer)
+      ' cerco se esiste già un layer nominato "AUX_SPLIT_WJ", altrimenti lo creo
+      Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(IdParentPart, INFO_AUX_SPLIT_WJ)
+      If IdAuxLayer = GDB_ID.NULL Then Return
+      Dim nIdTextFlag As Integer = EgtGetFirstNameInGroup(IdAuxLayer, "RefSide_" & nIdMy.ToString)
+      EgtErase(nIdTextFlag)
    End Sub
 
 #End Region    ' WaterJet Section and StartPoint
@@ -1050,31 +1147,140 @@ Public Class NestingTabVM
       End Get
       Set(value As Boolean)
          m_bSplitCurvWJ = value
+         If Not m_bSplitCurvWJ Then
+            ' resetto i parametri di selezione dei lati
+            ResetSplitCurvWJParam(True)
+         End If
          m_bDragRectangle = False
+         m_bStartCurvWJ = False
+         ResetStartCurvWJParam(True)
          NotifyPropertyChanged("bDragRectangle")
+         NotifyPropertyChanged("bStartCurvWJ")
       End Set
    End Property
 
-   Private m_SplitCurvWJ_Visibility As Visibility = Visibility.Collapsed
-   Public ReadOnly Property SplitCurvWJ_Visibility As Visibility
+   Private m_WJ_Cmd_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property WJ_Cmd_Visibility As Visibility
       Get
-         Return m_SplitCurvWJ_Visibility
+         Return m_WJ_Cmd_Visibility
       End Get
    End Property
 
    ' in funzione della macchinata attiva predispone la visualizzazione del bottone SplitCurv (abilitato solo per WaterJet Machine)
-   Public Sub Set_SplitCurvWJ_Visibility()
+   Public Sub Set_WJ_Cmd_Visibility()
       ' gestisco la visualizzazione del comando ON_OFF (per i tagli waterjet)
       If CurrentMachine.WaterJettingActive Then
-         m_SplitCurvWJ_Visibility = Visibility.Visible
-         m_CountColumn += 1
+         m_WJ_Cmd_Visibility = Visibility.Visible
       Else
-         ' verifico se in precedenza fosse stato attivo il comando 
-         If m_SplitCurvWJ_Visibility = Visibility.Visible Then m_CountColumn -= 1
-         m_SplitCurvWJ_Visibility = Visibility.Collapsed
+         m_WJ_Cmd_Visibility = Visibility.Collapsed
+      End If
+      NotifyPropertyChanged("WJ_Cmd_Visibility")
+   End Sub
+
+#Region "WATERJET START POINT"
+
+   ' funzione per la selezione del punto di inizio tagli waterjet (percorso chiuso)
+   Private Sub OnMyMouseDownSceneStartCurv(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Si può selezionare solo con il tasto sinistro e se il bottone TEST Attivo
+      If e.Button <> Windows.Forms.MouseButtons.Left Or
+         Not m_bStartCurvWJ Then
+         Return
+      End If
+
+      ' Acquisisco punto da disegno
+      Dim ptStartCurv As New Point3d
+      EgtUnProjectPoint(e.Location, ptStartCurv)
+      ' Aggiusto Z punto acquisito (è in globale)
+      Dim ptRawMax As New Point3d
+      Dim ptRawMin As New Point3d
+      If GetRawBox(ptRawMin, ptRawMax) Then
+         ptStartCurv.z = ptRawMax.z
+      End If
+
+      ' Se esiste un elemento selezionato
+      EgtResetMark(m_nIdSelectedWaterJet)
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sLayer As String = String.Empty
+         ' layer di origine
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del Layer
+         EgtGetName(nIdParent, sLayer)
+         ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
+         If sLayer = NAME_OUTLOOP Or sLayer = NAME_INLOOP Then
+            If EgtGetType(nIdMy) = GDB_TY.CRV_ARC OrElse EgtGetType(nIdMy) = GDB_TY.CRV_COMPO OrElse EgtGetType(nIdMy) = GDB_TY.CRV_LINE Then
+               ' verifico che il contorno sia chiuso, altrimenti esco
+               If Not VerifyOutLoopIsClosed(nIdParent) Then
+                  '91131=Il contorno non è chiuso
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(91131), MSG_TYPE.WARNING)
+                  Exit While
+               End If
+               ' recupero il gruppo della lavorazione associata
+               Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
+               ' VERIFICA: recupero l'elenco delle Preview di Tipo WaterJet_n_S associate a questo Part
+               Dim ListGroup As List(Of Integer) = ResearchGropuWJ(nIdParent, nIdPV)
+               ' VERIFICA: se esistono delle lavorazioni associate al percorso OutLoop di tipo Saw allora non procedo
+               Dim ListGroupSaw As List(Of Integer) = ResearchGropuSaw(nIdParent, nIdPV)
+               ' se non esiste almeno 1 Preview di tipo WaterJet
+               If ListGroup.Count = 1 And ListGroupSaw.Count = 0 Then
+                  EgtSetInfo(nIdParent, INFO_START, ptStartCurv)
+                  ' Ricalcolo tutte le lavorazioni
+                  Dim nWarn As Integer = 0
+                  ResetAllMachinings(nWarn)
+                  ' recupero l'indice del PreView che deve essere acceso per indicare la selezione
+                  ListGroup = ResearchGropuWJ(nIdParent, nIdPV)
+                  Dim nIdWJ As Integer = GetPVIdFromIdSide(ListGroup, nIdMy)
+                  GetCurrentPVFromIdSide(ListGroup, nIdMy, nIdWJ, nIdParent)
+                  m_nIdSelectedWaterJet = nIdWJ
+                  EgtSetMark(nIdWJ)
+                  EgtDraw()
+                  Exit While
+               Else
+                  '91131=Il contorno non è chiuso
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(91131), MSG_TYPE.WARNING)
+                  Exit While
+               End If
+
+            End If
          End If
-         NotifyPropertyChanged("SplitCurvWJ_Visibility")
-      NotifyPropertyChanged("CountColumn")
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+      Return
+   End Sub
+
+#End Region    ' Water Start Point
+
+   Private m_bStartCurvWJ As Boolean
+   Public Property bStartCurvWJ As Boolean
+      Get
+         Return m_bStartCurvWJ
+      End Get
+      Set(value As Boolean)
+         m_bStartCurvWJ = value
+         If Not m_bStartCurvWJ Then
+            ResetStartCurvWJParam(True)
+         End If
+         m_bDragRectangle = False
+         m_bSplitCurvWJ = False
+         ResetSplitCurvWJParam(True)
+         NotifyPropertyChanged("bDragRectangle")
+         NotifyPropertyChanged("bSplitCurvWJ")
+      End Set
+   End Property
+
+   Public Sub ResetStartCurvWJParam(Optional bAllParam As Boolean = True)
+      If bAllParam Then
+         EgtDeselectObj(m_nIdSelectedSideWJ)
+         EgtResetMark(m_nIdSelectedWaterJet)
+      End If
+      m_nIdSelectedSideWJ = GDB_ID.NULL
+      m_nIdSelectedWaterJet = GDB_ID.NULL
+      EgtDraw()
    End Sub
 
 #Region "COMMANDS"
@@ -1663,6 +1869,8 @@ Public Class NestingTabVM
       OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
       ' cancello tutti i tagli di separazione 
       ResetAllSplitCurv()
+      ' cancello tutti i punti di inizio (Waterjet)
+      ResetAllStartCurv()
       ' Cancello tutte le lavorazioni
       CamAuto.EraseMachinings(GDB_ID.NULL)
       ' Reinserisco tutte le lavorazioni piane
@@ -1765,6 +1973,11 @@ Public Class NestingTabVM
          OnMyMouseDownSceneSplitCurv(sender, e)
          Return
       End If
+      ' se in modalità punto inizio curve WaterJet
+      If m_bStartCurvWJ Then
+         OnMyMouseDownSceneStartCurv(sender, e)
+         Return
+      End If
 
       ' Per default no drag
       m_bDrag = False
@@ -1951,9 +2164,14 @@ Public Class NestingTabVM
       ' verifico che sia attivo il comando di modifica tagli waterjet
       If m_bSplitCurvWJ Then
          ' deseleziono gli oggeti, resetto le variabili usate, aggiorno il disegno
-         ResetSplitCurvWJParam()
+         ' ResetSplitCurvWJParam(False)
          Return
       End If
+      If m_bStartCurvWJ Then
+         ' ResetStartCurvWJParam(False)
+         Return
+      End If
+
       ' Se eseguito drag
       If Not m_bDragToStart Then
          ' Se movimento con sola verifica finale