Gestione comando Canc e Escape per interrompere

- cambio di versione.

CompoWindow/CompoListPage/CompoListPageVM.vb

@@ -108,6 +108,8 @@ Public Class CompoListPageVM
       End Get
       Set(value As Boolean)
          If m_SideAngle_IsChecked OrElse m_Drip_IsChecked Then Return
+         CompoWindowMap.refCompoSceneHostV.m_SelListHole.Clear()
+         CompoWindowMap.refCompoSceneHostV.m_DeselectListHole.Clear()
          m_FiloTop_IsChecked = value
          If value Then
             ' Se non ci sono loop interni, imposto quello esterno
@@ -122,6 +124,7 @@ Public Class CompoListPageVM
             SideEntityControl = New SideEntityControlV(m_SideEntityControlVM)
             m_CompoListVisibility = Visibility.Collapsed
             m_CompoBackVisibility = Visibility.Collapsed
+            CompoWindowMap.refCompoSceneHostV.SetRefSideEntityControlVM(m_SideEntityControlVM)
          Else
             m_SideEntityControlVM.Close()
             m_SideEntityControlVM = Nothing

CompoWindow/CompoParamPage/CompoParamPageV.xaml

@@ -22,8 +22,8 @@
                 </ToggleButton.Content>
             </ToggleButton>
             
-            <!--FiloTop--><!--
-            <ToggleButton Padding="0"
+            <!--FiloTop-->
+            <!--<ToggleButton Padding="0"
                        IsChecked="{Binding FiloTop_IsChecked}"
                        Style="{StaticResource CompoWindow_ToggleButton}"
                        Margin="0,0,1.75,0"

CompoWindow/CompoParamPage/CompoParamPageVM.vb

@@ -67,8 +67,6 @@ Public Class CompoParamPageVM
    Private m_AlzAndFront_Visibility As Visibility 
    Public Property AlzAndFront_Visibility As Visibility
       Get
-         '' !!!! Temporaneamente in attesa di completamento Frontalini e alzatine !!!!
-         'Return Visibility.Collapsed 
          Return m_AlzAndFront_Visibility
       End Get
       Set(value As Visibility)
@@ -750,6 +748,50 @@ Public Class CompoParamPageVM
       NotifyPropertyChanged("MsgColor")
    End Sub
 
+   Private Sub UpdateInLoopReference(nCmp As Integer)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               Dim LocalList As New List(Of Integer) From {nIdInLoop}
+               If IsNothing(m_SideEntityControlVM) Then
+                  m_SideEntityControlVM = New SideEntityControlVM(SideEntityControlVM.CallingWindowOpt.COMPO,
+                                                            CompoWindowMap.refCompoSceneHostV.CompoScene,
+                                                            SideEntityControlVM.ModeOpt.FILOTOP)
+                  m_SideEntityControlVM.CreateFiloTopPreView(LocalList)
+               Else
+                  m_SideEntityControlVM.CreateFiloTopPreView(LocalList)
+               End If
+               EgtSetStatus(nLayFiloTop, GDB_ST.ON_)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
+   ' riceve la info "ID" della componente
+   Public Sub SetStatusVisibilityInLoopReference(nCmp As Integer, Status As GDB_ST)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               EgtSetStatus(nLayFiloTop, Status)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -867,6 +909,7 @@ Public Class CompoParamPageVM
             Dim nCmpInfo As Integer = 0
             If EgtGetInfo(nId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
                EgtSetStatus(nId, GDB_ST.OFF)
+               UpdateInLoopReference(nCmp)
                Exit While
             End If
             nId = EgtGetNextName(nId, "HoleLabels")

CompoWindow/CompoSceneHostV.xaml.vb

@@ -3,6 +3,11 @@ Imports EgtWPFLib5
 
 Public Class CompoSceneHostV
 
+   Public m_SelListHole As New List(Of Integer)
+   Public m_DeselectListHole As New List(Of Integer)
+
+   Private m_refSideEntityControlVM As SideEntityControlVM
+
    Private m_SelFromScene As Boolean = False
    Friend ReadOnly Property SelFromScene As Boolean
       Get
@@ -36,6 +41,10 @@ Public Class CompoSceneHostV
       EgtDraw()
    End Sub
 
+   Public Sub SetRefSideEntityControlVM(refSideEntityControl As SideEntityControlVM)
+      m_refSideEntityControlVM = refSideEntityControl
+   End Sub
+
    Private Sub PreInitializeScene()
       ' imposto colore di default
       Dim DefColor As New Color3d(0, 0, 0)
@@ -156,6 +165,8 @@ Public Class CompoSceneHostV
          Dim nCmpInfo As Integer = 0
          If EgtGetInfo(nHLId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
             EgtSetStatus(nHLId, GDB_ST.ON_)
+            ' nascondo eventuali FiloTop
+            CompoWindowMap.refCompoParamPageVM.SetStatusVisibilityInLoopReference(nCmp, GDB_ST.OFF)
             Exit While
          End If
          nHLId = EgtGetNextName(nHLId, "HoleLabels")
@@ -262,6 +273,8 @@ Public Class CompoSceneHostV
                      EgtRemoveInfo(nLayId, INFO_DEPTH)
                      EgtResetColor(nLayId)
                   End If
+                  m_DeselectListHole.Add(nLayId)
+                  m_SelListHole.Remove(nLayId)
                Else
                   Dim sLayName As String = ""
                   If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
@@ -272,12 +285,18 @@ Public Class CompoSceneHostV
                      EgtSetInfo(nLayId, INFO_DEPTH, SideAngleEntity.m_Parameter2)
                      EgtSetColor(nLayId, New Color3d(255, 255, 255))
                   End If
+                  m_SelListHole.Add(nLayId)
+                  m_DeselectListHole.Remove(nLayId)
                End If
                EgtDraw()
             End If
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+      If Not IsNothing(m_refSideEntityControlVM) Then
+         m_refSideEntityControlVM.CreateFiloTopPreView(m_SelListHole)
+         m_refSideEntityControlVM.EraseFiloTopPreview(m_DeselectListHole)
+      End If
    End Sub
 
 #End Region    ' Events

Constants/ConstIni.vb

@@ -104,6 +104,7 @@ Module ConstIni
    Public Const K_ENGRAVENUMBER2 As String = "EngraveNumber2"
    Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
    Public Const K_ENGRAVESHORT As String = "EngraveShort"
+   Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
    Public Const K_DRIPOFFSET As String = "DripOffset"
    Public Const K_DRIPOFFSET2 As String = "DripOffset2"
    Public Const K_DRIPDEPTH As String = "DripDepth"
@@ -111,6 +112,7 @@ Module ConstIni
    Public Const K_UNDERDRILLDEPTH As String = "UnderDrillDepth"
    Public Const K_FILOTOPOFFSET As String = "FiloTopOffset"
    Public Const K_FILOTOPDEPTH As String = "FiloTopDepth"
+   Public Const K_FILOTOPROUNDOFF As String = "FiloTopRoundOff"
 
    Public Const S_NEST As String = "Nest"
    Public Const K_DIRECT As String = "Direct"

EgtStoneLib/CamAuto.vb

@@ -149,6 +149,14 @@ Friend Module CamAuto
       Return bOk
    End Function
 
+   Friend Function ResetAllBridges() As Boolean
+      Dim bOk As Boolean = True
+      Dim nMachGroup As Integer = EgtGetCurrMachGroup()
+      Dim nBridgesGroup As Integer = EgtGetFirstNameInGroup(nMachGroup, "Bridges")
+      bOk = EgtErase(nBridgesGroup)
+      Return bOk
+   End Function
+
    ' verifico che il contorno passato non sia stato separato
    Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer) As Boolean
       Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)

EgtStoneLib/ConstMach.vb

@@ -160,6 +160,7 @@ Module ConstMach
    Public Const NAME_PREVIEW As String = "PV"
    ' Info in layer contorno interno per FiloTop
    Public Const INFO_FILOTOP As String = "FiloTop"
+   Public Const INFO_ROUNDOFF As String = "RoundOff"
    ' Info in entità da tagliare per affondamento
    Public Const INFO_DEPTH As String = "Depth"
    Public Const INFO_DEPTH2 As String = "Depth2"

MainWindow/MainWindowM.vb

@@ -197,8 +197,8 @@ Public Class MainWindowM
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace( sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2405, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2405, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2406, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2406, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.OFFICE_BASE)
       ' Inizializzazione generale di EgtInterface
@@ -269,10 +269,14 @@ Public Class MainWindowM
       EgtOutLog("KeyOptions : " & bKey.ToString() & " " & m_nKeyOptions.ToString() & " " & bProd.ToString())
       EgtPHOTOLib.MainData.SetConfigDir(m_sConfigDir)
       EgtPHOTOLib.MainData.SetKeyLevel(m_nKeyLevel)
-      EgtPHOTOLib.MainData.SetKeyOptions( CInt( m_nKeyOptions))
+      EgtPHOTOLib.MainData.SetKeyOptions(CInt(m_nKeyOptions))
       EgtPHOTOLib.MainData.SetPhotoDir(m_sPhotoDir)
       EgtPHOTOLib.MainData.SetBackUpDir(m_sBackUpDir)
       EgtPHOTOLib.MainData.SetIsOmagOFFICE(True)
+      EgtPHOTOLib.MainData.SetUser(Environment.MachineName & "\" & Environment.UserName & " (" & nInstance.ToString() & ")")
+      Dim sIdKey As String = String.Empty
+      EgtGetKeyInfo(sIdKey)
+      EgtPHOTOLib.MainData.SetKey(sIdKey)
    End Sub
 
    Private Sub ManageInstance()

My Project/AssemblyInfo.vb

@@ -69,6 +69,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.5.4")>
-<Assembly: AssemblyFileVersion("2.4.5.4")>
+<Assembly: AssemblyVersion("2.4.7.1")>
+<Assembly: AssemblyFileVersion("2.4.7.1")>
 

MySceneHost/MySceneHostVM.vb

@@ -797,6 +797,7 @@ Public Class MySceneHostVM
          Case OptionPanelVM.Tabs.NESTING
             OmagOFFICEMap.refNestingTabVM.OnKeyDownScene(sender, e)
          Case OptionPanelVM.Tabs.MACHINING
+            OmagOFFICEMap.refSplitModeVM.OnKeyDownScene(sender, e)
          Case OptionPanelVM.Tabs.SIMUL
       End Select
    End Sub

OptionPanel/MachiningTab/SplitModeV.xaml

@@ -69,23 +69,38 @@
          <StackPanel>
             
             <UniformGrid Columns="3" Margin="0,0,0,5">
-
-               <Button Content="{Binding CutMsg}"
-                       Style="{StaticResource OptionPanel_TextWrapButton}"
-                       Command="{Binding CutCommand}"
-                       Visibility="{Binding CutBtnVisibility}"
-                       Margin="0,0,2.5,0"/>
+                <Grid>
+                   <Button Content="{Binding CutMsg}"
+                           Style="{StaticResource OptionPanel_TextWrapButton}"
+                           Command="{Binding CutCommand}"
+                           Visibility="{Binding CutBtnVisibility}"
+                           Margin="0,0,2.5,0"/>
+                   <ToggleButton Grid.Row="0"
+                           Content="{Binding BridgeMsg}"           
+                           Style="{StaticResource OptionPanel_ToggleWrapButton}"
+                           IsChecked="{Binding BridgeBtn_IsChecked}"
+                           Visibility="{Binding BridgeBtnVisibility}"
+                           Margin="0,0,2.5,0" Padding="0"/>
+                </Grid>
+                
                <Button Content="{Binding CutStartMsg}"
                        Style="{StaticResource OptionPanel_TextWrapButton}"
                        Command="{Binding CutStartCommand}"
                        Visibility="{Binding CutStartBtnVisibility}"
                        Margin="2.5,0,2.5,0"/>
-               <Button Content="{Binding CutEndMsg}"
-                       Style="{StaticResource OptionPanel_TextWrapButton}"
-                       Command="{Binding CutEndCommand}"
-                       Visibility="{Binding CutEndBtnVisibility}"
-                       Margin="2.5,0,0,0"/>
-               
+               <Grid>
+                  <Button Content="{Binding CutEndMsg}"
+                          Style="{StaticResource OptionPanel_TextWrapButton}"
+                          Command="{Binding CutEndCommand}"
+                          Visibility="{Binding CutEndBtnVisibility}"
+                          Margin="2.5,0,0,0"/>
+                  <ToggleButton Grid.Row="0"
+                         Content="{Binding BridgeDeleteMsg}"      
+                         Style="{StaticResource OptionPanel_ToggleWrapButton}"
+                         IsChecked="{Binding BridgeDeleteBtn_IsChecked}"
+                         Visibility="{Binding BridgeDeleteBtnVisibility}"
+                         Margin="2.5,0,0,0" Padding="0"/>
+               </Grid>
             </UniformGrid>
 
             <Grid Visibility="{Binding AllExtRedVisibility}">
@@ -138,23 +153,25 @@
             </UniformGrid>
 
             <UniformGrid Columns="3" Margin="0,0,0,5">
-
+              
                <Button Content="{Binding OutCenEndMsg}"
                        Style="{StaticResource OptionPanel_TextWrapButton}"
                        Command="{Binding OutCenEndCommand}"
                        Visibility="{Binding OutCenEndBtnVisibility}"
                        Margin="0,0,2.5,0" Padding="0"/>
+
                <Button Content="{Binding AllOutEndMsg}"
-                       Style="{StaticResource OptionPanel_TextWrapButton}"
-                       Command="{Binding AllOutEndCommand}"
-                       Visibility="{Binding AllOutEndBtnVisibility}"
-                       Margin="2.5,0,2.5,0"/>
+                   Style="{StaticResource OptionPanel_TextWrapButton}"
+                   Command="{Binding AllOutEndCommand}"
+                   Visibility="{Binding AllOutEndBtnVisibility}"
+                   Margin="2.5,0,2.5,0"/>
+
                <Button Content="{Binding AllCenEndMsg}"
                        Style="{StaticResource OptionPanel_TextWrapButton}"
                        Command="{Binding AllCenEndCommand}"
                        Visibility="{Binding AllCenEndBtnVisibility}"
                        Margin="2.5,0,0,0"/>
-               
+
             </UniformGrid>
 
             <UniformGrid Columns="3" Margin="0,0,0,5">

OptionPanel/MachiningTab/SplitModeVM.vb

@@ -25,6 +25,20 @@ Public Class SplitModeVM
    ' verifico che le lavorazioni selezionate siano omogenee (con lo stesso utensile)
    Private m_bAreHomogeneous As Boolean = False
 
+   ' Id tagli WJ per generazione ponticelli tra due percorsi
+   Private m_nIdSelectedPartWJ_Srt As Integer = GDB_ID.NULL
+   Private m_nIdSelectedSideWJ_Srt As Integer = GDB_ID.NULL
+   Private m_nIdSelectedWaterJet_Srt As Integer = GDB_ID.NULL
+   Private m_nIdSelectedPartWJ_End As Integer = GDB_ID.NULL
+   Private m_nIdSelectedSideWJ_End As Integer = GDB_ID.NULL
+   Private m_nIdSelectedWaterJet_End As Integer = GDB_ID.NULL
+   ' Id gruppo Bridges (Nuovo da versione 30/08/2022)
+   Private m_nIdBridgesGroup As Integer = GDB_ID.NULL
+   Private m_nIdBridgeLineGroup As Integer = GDB_ID.NULL
+   Private m_nIdBridge As Integer = GDB_ID.NULL
+   Private m_ptSrtBridge As New Point3d
+   Private m_ptEndBridge As New Point3d
+
    ' Flag di pagina attiva
    Private m_bActive As Boolean = False
    ' Drag
@@ -218,6 +232,52 @@ Public Class SplitModeVM
       End Set
    End Property
 
+   Private m_BridgeBtnVisibility As Visibility = Visibility.Hidden
+   Public Property BridgeBtnVisibility As Visibility
+      Get
+         Return m_BridgeBtnVisibility
+      End Get
+      Set(value As Visibility)
+         m_BridgeBtnVisibility = value
+         NotifyPropertyChanged(NameOf(BridgeBtnVisibility))
+      End Set
+   End Property
+
+   Private m_BridgeDeleteBtnVisibility As Visibility = Visibility.Hidden
+   Public Property BridgeDeleteBtnVisibility As Visibility
+      Get
+         Return m_BridgeDeleteBtnVisibility
+      End Get
+      Set(value As Visibility)
+         m_BridgeDeleteBtnVisibility = value
+         NotifyPropertyChanged(NameOf(BridgeDeleteBtnVisibility))
+      End Set
+   End Property
+
+   Private m_BridgeBtn_IsChecked As Boolean = False
+   Public Property BridgeBtn_IsChecked As Boolean
+      Get
+         Return m_BridgeBtn_IsChecked
+      End Get
+      Set(value As Boolean)
+         m_BridgeBtn_IsChecked = value
+         BridgeIsChecked()
+         NotifyPropertyChanged(NameOf(BridgeBtn_IsChecked))
+      End Set
+   End Property
+
+   Private m_BridgeDeleteBtn_IsChecked As Boolean = False
+   Public Property BridgeDeleteBtn_IsChecked As Boolean
+      Get
+         Return m_BridgeDeleteBtn_IsChecked
+      End Get
+      Set(value As Boolean)
+         m_BridgeDeleteBtn_IsChecked = value
+         BridgeDeleteIsChecked()
+         NotifyPropertyChanged(NameOf(BridgeDeleteBtn_IsChecked))
+      End Set
+   End Property
+
 #Region "Messages"
 
    Public ReadOnly Property OnOffMsg As String
@@ -328,6 +388,18 @@ Public Class SplitModeVM
       End Get
    End Property
 
+   Public ReadOnly Property BridgeMsg As String
+      Get
+         Return "Bridge"
+      End Get
+   End Property
+
+   Public ReadOnly Property BridgeDeleteMsg As String
+      Get
+         Return "Delete Bridge"
+      End Get
+   End Property
+
 #End Region    ' Messages
 
    ' Definizione comandi
@@ -367,6 +439,11 @@ Public Class SplitModeVM
 
    Friend Function InitSplitRaw() As Boolean
       m_bActive = True
+      ' aggiorno la visualizzazione dei comandi per generare i bridge
+      m_BridgeBtn_IsChecked = False
+      NotifyPropertyChanged(NameOf(BridgeBtn_IsChecked))
+      m_BridgeDeleteBtn_IsChecked = False
+      NotifyPropertyChanged(NameOf(BridgeDeleteBtn_IsChecked))
       'm_CurrProjPage = m_MainWindow.m_CurrentProjectPageUC
       m_nDragInd = -1
       m_nDragType = 0
@@ -433,6 +510,9 @@ Public Class SplitModeVM
 
    Friend Function ExitSplitRaw(Optional bTrueExit As Boolean = True) As Boolean
       m_bActive = False
+      ' eventualmente interrompo la creazione dei ponticelli
+      DeselectWJBridgesPart()
+
       ' Rimuovo evidenziazione e numeri
       RemoveMarkAndNumbers()
       ' Ripristino colori lavorazioni
@@ -595,8 +675,32 @@ Public Class SplitModeVM
          ' assegno numerazione
          NumberDirectionMachining(nI)
       Next
+      ' -------------------- Recupero le lavorazioni indicate come attive --------------------
+      Dim ActiveMachLst As New List(Of Integer)
+      For Each ItemSplitMach As NameIdLsBxItem In m_ItemList
+         ActiveMachLst.Add(ItemSplitMach.Ind)
+      Next
+      ' -------------------- Recupero le lavorazioni indicate come attive --------------------
       ' Preparo la lista degli Item
       ShowMachiningList()
+      ' -------------------- Riattivo le lavorazioni precedenti --------------------
+      For Each Item As SplitMach In m_MachiningList
+         EgtSetInfo(Item.m_nId, INFO_MCH_USER_OFF, True)
+      Next
+
+      For nIndex As Integer = 0 To ActiveMachLst.Count - 1
+         For Each ItemSplitMach As NameIdLsBxItem In m_ItemList
+            If ItemSplitMach.Ind = ActiveMachLst(nIndex) Then
+               EgtRemoveInfo(m_MachiningList(ItemSplitMach.Ind).m_nId, INFO_MCH_USER_OFF)
+               m_MachiningList(ItemSplitMach.Ind).m_bEnabled = True
+               ItemSplitMach.bIsActive = True
+               ' sistemo colore
+               ColorMachining(m_MachiningList(ItemSplitMach.Ind))
+               Exit For
+            End If
+         Next
+      Next
+      ' -------------------- Riattivo le lavorazioni precedenti --------------------
       ' Aggiorno visualizzazione
       EgtDraw()
       ' Aggiono abilitazione bottoni
@@ -753,6 +857,21 @@ Public Class SplitModeVM
          AllReduceBtnVisibility = Visibility.Visible
       End If
 
+      ' gestione bottone per generazione ponticelli
+      If Type = MCH_OY.WATERJETTING Then
+         ' siccome la stessa posizione è occupata da due comandi sovrapposti
+         If CutBtnVisibility = Visibility.Hidden Then
+            BridgeBtnVisibility = Visibility.Visible
+            BridgeDeleteBtnVisibility = Visibility.Visible
+         Else
+            BridgeBtnVisibility = Visibility.Hidden
+            BridgeDeleteBtnVisibility = Visibility.Hidden
+         End If
+      Else
+         BridgeBtnVisibility = Visibility.Hidden
+         BridgeDeleteBtnVisibility = Visibility.Hidden
+      End If
+
    End Sub
 
    Private Function ModifyOtherLeadIn(nI As Integer, nLiOthType As Integer) As Boolean
@@ -1017,6 +1136,45 @@ Public Class SplitModeVM
       EgtSetInfo(m_MachiningList(nI).m_nId, INFO_MCH_USER_EAL, dOrigUsal)
    End Sub
 
+   Private Sub BridgeIsChecked()
+      ' eventualmente spengo il comando per eliminare i ponticelli
+      If m_BridgeDeleteBtn_IsChecked Then
+         m_BridgeDeleteBtn_IsChecked = False
+         NotifyPropertyChanged(NameOf(BridgeDeleteBtn_IsChecked))
+      End If
+      ' se deseleziono resetto tutte le variabili
+      If Not m_BridgeBtn_IsChecked Then
+         ' se sono in fase di creazione di un ponticello interrompo
+         DeselectWJBridgesPart()
+         Return
+      End If
+      ' recuoero il gruppo di lavorazione corrente
+      Dim nIdCurrMachGroup As Integer = EgtGetCurrMachGroup()
+      ' creo il gruppo per i ponticelli
+      Dim sNameGroup As String = "Bridges"
+      Dim nId As Integer = EgtGetFirstNameInGroup(nIdCurrMachGroup, sNameGroup)
+      If nId <> GDB_ID.NULL Then
+         m_nIdBridgesGroup = nId
+      End If
+      ' se non lo trovo allora lo creo
+      If nId = GDB_ID.NULL Then
+         m_nIdBridgesGroup = EgtCreateGroup(nIdCurrMachGroup)
+         EgtSetName(m_nIdBridgesGroup, "Bridges")
+      End If
+   End Sub
+
+   Private Sub BridgeDeleteIsChecked()
+      ' eventualmente spengo il comando per inserire i ponticelli
+      If m_BridgeBtn_IsChecked Then
+         m_BridgeBtn_IsChecked = False
+         NotifyPropertyChanged(NameOf(BridgeBtn_IsChecked))
+      End If
+
+      If Not m_BridgeDeleteBtn_IsChecked Then
+         DeselectWJBridgesPart()
+      End If
+   End Sub
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -2114,8 +2272,6 @@ Public Class SplitModeVM
 
 #Region "InvertCommand"
 
-#End Region    ' InvertComman
-
    Public ReadOnly Property InvertCommand As ICommand
       Get
          If m_cmdInvert Is Nothing Then
@@ -2172,10 +2328,181 @@ Public Class SplitModeVM
       Next
    End Sub
 
+#End Region    ' InvertComman
+
 #End Region       ' COMMANDS
 
 #Region "EVENTS"
 
+#Region "BRIDGE"
+
+   Private Sub OnMyMouseDownSceneBridges(sender As Object, e As System.Windows.Forms.MouseEventArgs,
+                                         ByVal IsFirst As Boolean,
+                                         ByRef m_nIdSelectedSideWJ As Integer,
+                                         ByRef m_nIdSelectedWaterJet As Integer,
+                                         ByRef nIdParentPart As Integer)
+
+      ' Acquisisco punto da disegno
+      Dim CurrPoint As New Point3d
+      EgtUnProjectPoint(e.Location, CurrPoint)
+
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sLayer As String = String.Empty
+         ' layer di origine
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del Layer
+         EgtGetName(nIdParent, sLayer)
+         ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
+         If sLayer = NAME_OUTLOOP Then
+            If EgtGetType(nIdMy) = GDB_TY.CRV_ARC OrElse EgtGetType(nIdMy) = GDB_TY.CRV_COMPO OrElse EgtGetType(nIdMy) = GDB_TY.CRV_LINE Then
+               If m_nIdSelectedSideWJ <> GDB_ID.NULL Or m_nIdSelectedSideWJ = nIdMy Then
+                  EgtDeselectObj(m_nIdSelectedSideWJ)
+               End If
+               ' recupero il gruppo della lavorazione associata
+               nIdParentPart = EgtGetParent(nIdParent)
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, NAME_PREVIEW)
+               ' VERIFICA: recupero l'elenco delle Preview di Tipo WaterJet associate a questo Part
+               Dim ListGroup As List(Of Integer) = OmagOFFICEMap.refNestingTabVM.ResearchGropuWJ(nIdParent, nIdPV)
+               ' VERIFICA: se esistono delle lavorazioni associate al percorso OutLoop di tipo Saw allora non procedo
+               Dim ListGroupSaw As List(Of Integer) = OmagOFFICEMap.refNestingTabVM.ResearchGropuSaw(nIdParent, nIdPV)
+               ' se non esiste almeno 1 Preview di tipo WaterJet
+               If ListGroup.Count > 0 Then
+                  m_nIdSelectedSideWJ = nIdMy
+                  ' Ricalcolo tutte le lavorazioni
+                  Dim nWarn As Integer = 0
+                  ResetAllMachinings(nWarn)
+                  ' recupero l'indice del PreView che deve essere acceso per indicare la selezione
+                  ListGroup = OmagOFFICEMap.refNestingTabVM.ResearchGropuWJ(nIdParent, nIdPV)
+                  Dim nIdWJ As Integer = OmagOFFICEMap.refNestingTabVM.GetPVIdFromIdSide(ListGroup, nIdMy)
+                  OmagOFFICEMap.refNestingTabVM.GetCurrentPVFromIdSide(ListGroup, nIdMy, nIdWJ, nIdParent)
+                  ' recupero il punto più vicino alla curva passata
+                  If IsFirst Then
+                     EgtNearPoint(nIdMy, CurrPoint, GDB_RT.GLOB, m_ptSrtBridge)
+                  Else
+                     ' prima di confermare verifico che non ci siano interferenze
+                     EgtNearPoint(nIdMy, CurrPoint, GDB_RT.GLOB, m_ptEndBridge)
+                     EgtModifyCurveEndPoint(m_nIdBridge, m_ptEndBridge, GDB_RT.GLOB)
+                     If VerifyInterference(m_nIdBridge) Then
+                        OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+                        ' salvo nel Gruppo "BridgeLine" gli dei pezzi che sono collegati
+                        EgtSetInfo(EgtGetParent(m_nIdBridge), "PartStart", m_nIdSelectedPartWJ_Srt)
+                        EgtSetInfo(EgtGetParent(m_nIdBridge), "PartEnd", m_nIdSelectedPartWJ_End)
+                     Else
+                        ' attendo la selezione di un punto valido
+                        m_nIdSelectedSideWJ = GDB_ID.NULL
+                        m_nIdSelectedWaterJet = GDB_ID.NULL
+                        nIdParentPart = GDB_ID.NULL
+                        OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+                        OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Bridge intersects part", 3, MSG_TYPE.ERROR_)
+                        Return
+                     End If
+                  End If
+                  m_nIdSelectedWaterJet = nIdWJ
+                  ' salvo il valore del PreView evidenziato
+                  EgtSetMark(nIdParentPart)
+                  ' EgtSetMark(nIdWJ)
+                  EgtSelectObj(nIdMy)
+                  EgtDraw()
+                  Exit While
+               End If
+            End If
+         End If
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+   End Sub
+
+   Private Sub OnMyMouseDownSceneBridgesDelete(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Acquisisco punto da disegno
+      Dim CurrPoint As New Point3d
+      EgtUnProjectPoint(e.Location, CurrPoint)
+
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sGroupName As String = String.Empty
+         ' gruppo di appartenenza
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del Layer
+         EgtGetName(nIdParent, sGroupName)
+         If sGroupName.Contains("BridgeLine") Then
+            EgtErase(nIdParent)
+            EgtDraw()
+            Return
+         End If
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+   End Sub
+
+   Private Sub OnMyMouseMoveSceneBridges(ptCurr As Point3d)
+      ptCurr.z = m_ptSrtBridge.z
+      ' rappresento il egmento
+      If m_nIdBridge = GDB_ID.NULL Then
+         m_nIdBridgeLineGroup = EgtCreateGroup(m_nIdBridgesGroup)
+         EgtSetName(m_nIdBridgeLineGroup, "BridgeLine")
+         m_nIdBridge = EgtCreateLine(m_nIdBridgeLineGroup, m_ptSrtBridge, ptCurr, GDB_RT.GLOB)
+      End If
+      EgtModifyCurveEndPoint(m_nIdBridge, ptCurr, GDB_RT.GLOB)
+      EgtDraw()
+   End Sub
+
+   Private Function VerifyInterference(nIdBridge As Integer) As Boolean
+      ' prima di procedere alla verifica accorco il segmento (solo per sicurezza) 10 * EPS_SMALL
+      Dim dLen As Double
+      EgtCurveLength(nIdBridge, dLen)
+      If dLen > 21 AndAlso Not EgtCurveIsClosed(nIdBridge) Then
+         EgtTrimCurveEndAtLen(nIdBridge, dLen - 10 * EPS_SMALL)
+         EgtTrimCurveStartAtLen(nIdBridge, 10 * EPS_SMALL)
+      End If
+      ' EgtSaveFile("c:\EgtData\OmagOFFICE\Temp\Bridge.nge", NGE.BIN)
+      Dim nIdPart As Integer = GDB_ID.NULL
+      nIdPart = EgtGetFirstPartInRawPart(GetCurrentRaw())
+      While nIdPart <> GDB_ID.NULL
+         Dim nIdRegion As Integer = EgtGetFirstNameInGroup(nIdPart, "Region")
+         Dim nIdSurf As Integer = EgtGetFirstInGroup(nIdRegion)
+         While nIdSurf <> GDB_ID.NULL
+            If EgtGetType(nIdSurf) = GDB_TY.SRF_FRGN Then
+               ' se la linea bridge interseca la superficie allora restitusco false
+               If EgtCurveWithRegionClassify(nIdBridge, nIdSurf) <> CREGC.OUT Then
+                  EgtExtendCurveStartByLen(nIdBridge, 10 * EPS_SMALL)
+                  Return False
+               End If
+               Exit While
+            End If
+         End While
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return True
+   End Function
+
+   Private Sub DeselectWJBridgesPart()
+      ' se in fase di definzione di un ponticello lo elimino
+      If m_nIdSelectedSideWJ_Srt <> GDB_ID.NULL And m_nIdSelectedSideWJ_End = GDB_ID.NULL And m_nIdBridge <> GDB_ID.NULL Then
+         EgtErase(EgtGetParent(m_nIdBridge))
+      End If
+      m_nIdBridge = GDB_ID.NULL
+      EgtResetMark(m_nIdSelectedPartWJ_Srt)
+      m_nIdSelectedPartWJ_Srt = GDB_ID.NULL
+      EgtDeselectObj(m_nIdSelectedSideWJ_Srt)
+      m_nIdSelectedSideWJ_Srt = GDB_ID.NULL
+      m_nIdSelectedWaterJet_Srt = GDB_ID.NULL
+      EgtResetMark(m_nIdSelectedPartWJ_End)
+      m_nIdSelectedPartWJ_End = GDB_ID.NULL
+      EgtDeselectObj(m_nIdSelectedSideWJ_End)
+      m_nIdSelectedSideWJ_End = GDB_ID.NULL
+      m_nIdSelectedWaterJet_End = GDB_ID.NULL
+      EgtDraw()
+   End Sub
+
+#End Region    ' Bridge
+
    Friend Sub OnMouseDownScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
       If Not m_bActive OrElse OmagOFFICEMap.refMachiningTabVM.IsShow Then Return
@@ -2184,6 +2511,27 @@ Public Class SplitModeVM
          Not OmagOFFICEMap.refSceneHostVM.MainScene.IsStatusNull() Then
          Return
       End If
+
+      ' definizione dei ponticelli
+      If m_BridgeBtn_IsChecked Then
+         If m_nIdSelectedPartWJ_Srt = GDB_ID.NULL Then
+            OnMyMouseDownSceneBridges(sender, e, True, m_nIdSelectedSideWJ_Srt, m_nIdSelectedWaterJet_Srt, m_nIdSelectedPartWJ_Srt)
+         Else
+            OnMyMouseDownSceneBridges(sender, e, False, m_nIdSelectedSideWJ_End, m_nIdSelectedWaterJet_End, m_nIdSelectedPartWJ_End)
+         End If
+         ' se entrambi i pezzi sono stati definiti allora procedo alla deselezione
+         If m_nIdSelectedPartWJ_Srt <> GDB_ID.NULL And m_nIdSelectedPartWJ_End <> GDB_ID.NULL Then
+            DeselectWJBridgesPart()
+         End If
+         Return
+      End If
+
+      ' eliminazione dei ponticelli
+      If m_BridgeDeleteBtn_IsChecked Then
+         OnMyMouseDownSceneBridgesDelete(sender, e)
+         Return
+      End If
+
       ' Reset drag
       m_nDragInd = -1
       m_nDragType = 0
@@ -2272,13 +2620,22 @@ Public Class SplitModeVM
    Friend Sub OnMyMouseMoveScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Verifico di essere il gestore attivo e non in modalità sola visualizzazione
       If Not m_bActive OrElse OmagOFFICEMap.refMachiningTabVM.IsShow Then Return
+      ' Ricavo il punto corrente in coordinate mondo
+      Dim ptCurr As Point3d
+      EgtUnProjectPoint(e.Location, ptCurr)
+
+      ' definizione dei ponticelli
+      If m_BridgeBtn_IsChecked Then
+         If m_nIdSelectedPartWJ_Srt <> GDB_ID.NULL Then
+            OnMyMouseMoveSceneBridges(ptCurr)
+         End If
+         Return
+      End If
+
       ' Se drag non abilitato o in corso
       If m_nDragInd = -1L Or m_bDragging Then Return
       m_bDragging = True
       Dim nOperId As Integer = m_MachiningList(m_nDragInd).m_nId
-      ' Ricavo il punto corrente in coordinate mondo
-      Dim ptCurr As Point3d
-      EgtUnProjectPoint(e.Location, ptCurr)
       ' Ricavo il vettore di movimento e la variazione di lunghezza
       Dim vtMove As Vector3d = ptCurr - m_ptDragPrev
       Dim dDelta = vtMove * m_MachiningList(m_nDragInd).m_vtDir
@@ -2367,6 +2724,12 @@ Public Class SplitModeVM
       End If
    End Sub
 
+   Friend Sub OnKeyDownScene(sender As Object, e As System.Windows.Forms.KeyEventArgs)
+      ' Con CANC cancello i pezzi selezionati
+      If (e.KeyData = System.Windows.Forms.Keys.Delete Or e.KeyData = System.Windows.Forms.Keys.Escape) And (m_BridgeBtn_IsChecked Or m_BridgeDeleteBtn_IsChecked) Then
+         DeselectWJBridgesPart()
+      End If
+   End Sub
 #End Region    ' EVENTS
 
    '-----------------------------------------------------------------------------------------------

OptionPanel/NestingTab/NestingTabVM.vb

@@ -1871,6 +1871,8 @@ Public Class NestingTabVM
       ResetAllSplitCurv()
       ' cancello tutti i punti di inizio (Waterjet)
       ResetAllStartCurv()
+      ' cancello tutti i ponticelli disegnati
+      ResetAllBridges()
       ' Cancello tutte le lavorazioni
       CamAuto.EraseMachinings(GDB_ID.NULL)
       ' Reinserisco tutte le lavorazioni piane
@@ -2153,6 +2155,8 @@ Public Class NestingTabVM
       m_ptPrev = ptCurr
       ' Terminata esecuzione di drag
       m_bDragging = False
+      ' se è stato eseguito il Drag allora cancello tutti i ponticelli
+      ResetAllBridges()
    End Sub
 
    Friend Sub OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)

OptionPanel/RawPartTab/RawPartTabVM.vb

@@ -1,4 +1,6 @@
-Imports System.IO
+Imports System.Threading
+Imports System.Windows.Threading
+Imports System.IO
 Imports System.Collections.ObjectModel
 Imports EgtWPFLib5
 Imports EgtPHOTOLib
@@ -7,6 +9,10 @@ Imports EgtUILib
 Public Class RawPartTabVM
    Inherits VMBase
 
+   ' Timer
+   Private m_TimerIsBusy As Boolean = False
+   Private m_RefreshTimer As New DispatcherTimer
+
    Friend OmagPhoto As OmagPhotoV
 
    Private m_OmagPhotoVM As OmagPhotoVM
@@ -2034,11 +2040,17 @@ Public Class RawPartTabVM
          ' inserisco in elenco solo i materiali della macchina corrente
          AddHandler PhotoMap.refOptionPanelVM.SlabIsSelectedOFFICE, AddressOf OmagOFFICEMap.refRawPartTabVM.ClosePhotoWnd
 
-         ' Dim OmagPhotoWnd As New OmagPhotoV(Application.Current.MainWindow(), New OmagPhotoVM)
-         'OmagPhotoWnd.ShowDialog()
+         ' lancio il timer di aggiornamento dell'interfaccia, per la gestione di due OmagPHOTO che accedono allo stesso SQL
+         AddHandler m_RefreshTimer.Tick, AddressOf RefreshTimer_Tick
+         m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(2000)
+         m_RefreshTimer.Start()
+
+         ' apro la finestra per accedere al DB delle lastre
          Me.OmagPhoto = New OmagPhotoV
          OmagPhoto.ShowDialog()
 
+         m_RefreshTimer.Stop()
+
          EgtSetCurrentContext(EgtPHOTOLib.MainData.PreviousContext)
          EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
 
@@ -2156,6 +2168,17 @@ Public Class RawPartTabVM
       EgtDraw()
    End Sub
 
+   ' per la gestione di due OmagPHOTO che accedono allo stesso SQL
+   Private Sub RefreshTimer_Tick()
+      If Not m_TimerIsBusy And PhotoMap.refProjectVM.SelProjectMode = ProjectSlabVM.ProjectModeOpt.LIST Then
+         m_TimerIsBusy = True
+         m_RefreshTimer.Stop()
+         EgtPHOTOLib.PhotoMap.refListPageVM.RefreshLisPage()
+         m_TimerIsBusy = False
+         m_RefreshTimer.Start()
+      End If
+   End Sub
+
 #End Region ' PhotoCommand
 
 #Region "ConfirmPhotoCommand"

SideEntityControl/SideEntityControlV.xaml

@@ -172,6 +172,19 @@
                                 Grid.Column="1"/>
       </Grid>
 
-   </Grid>
+      <Grid Visibility="{Binding Parameter5_Visibility}"
+          Grid.Row="5"
+          Margin="0,0,0,5">
+          <Grid.ColumnDefinitions>
+              <ColumnDefinition Width="1.8*"/>
+              <ColumnDefinition Width="1.2*"/>
+          </Grid.ColumnDefinitions>
+
+          <TextBlock Text="{Binding Parameter5Msg}" Grid.Row="2"/>
+          <CheckBox IsChecked="{Binding Parameter5ChBx}" HorizontalAlignment="Center"
+                              Grid.Column="1"/>
+      </Grid>
+
+    </Grid>
    
 </UserControl>

SideEntityControl/SideEntityControlVM.vb

@@ -143,6 +143,7 @@ Public Class SideEntityControlVM
             StringToLen(value, m_Parameter1)
             ' Recupero il valore
             StringToLen(value, m_dDripOffset)
+            StringToLen(value, m_dOffsetFiloTop)
             ' Creo le geometrie dei gocciolatoi
             RefreshSideAngleText()
             ' Aggiorno i dati delle alette
@@ -203,6 +204,7 @@ Public Class SideEntityControlVM
             RefreshSideAngleText()
          Else
             m_dDripOffset2 = m_Parameter2
+            m_dDepthFiloTop = m_Parameter2
             ' Creo le geometrie dei gocciolatoi
             RefreshSideAngleText()
          End If
@@ -347,11 +349,16 @@ Public Class SideEntityControlVM
          Return LenToString(m_Parameter4, 2)
       End Get
       Set(value As String)
-         If m_Mode <> ModeOpt.SIDEANGLE Then
+         If m_Mode = ModeOpt.DRIP Then
             StringToLen(value, m_Parameter4)
             m_dDripShort = m_Parameter4
             ' Creo le geometrie dei gocciolatoi
             RefreshSideAngleText()
+         ElseIf m_Mode = ModeOpt.ENGRAVE Then
+            StringToLen(value, m_Parameter4)
+            m_dEngraveDepth2 = m_Parameter4
+            ' Creo le geometrie dei gocciolatoi
+            RefreshSideAngleText()
          End If
       End Set
    End Property
@@ -362,6 +369,41 @@ Public Class SideEntityControlVM
 
 #End Region    'Parameter 4
 
+#Region "Parameter 5"
+
+   Private m_Parameter5_Visibility As Visibility
+   Public Property Parameter5_Visibility As Visibility
+      Get
+         Return m_Parameter5_Visibility
+      End Get
+      Set(value As Visibility)
+         m_Parameter5_Visibility = value
+         NotifyPropertyChanged(NameOf(Parameter5_Visibility))
+      End Set
+   End Property
+
+   Private m_Parameter5ChBx As Boolean
+   Public Property Parameter5ChBx As Boolean
+      Get
+         Return m_Parameter5ChBx
+      End Get
+      Set(value As Boolean)
+         If m_Mode = ModeOpt.FILOTOP Then
+            m_bCornerRadius = value
+            ' Creo le geometrie dei gocciolatoi
+            RefreshSideAngleText()
+            m_Parameter5ChBx = m_bCornerRadius
+         End If
+         NotifyPropertyChanged("Parameter5ChBx")
+      End Set
+   End Property
+   Private Sub SetParameter5(value As Boolean)
+      m_Parameter5ChBx = value
+      NotifyPropertyChanged("Parameter5ChBx")
+   End Sub
+
+#End Region    'Parameter 5
+
    Private m_dSideAngle As Double = 0
 
    Private m_HeightA As Double = 0
@@ -369,13 +411,16 @@ Public Class SideEntityControlVM
    Private m_DeltaAngF As Double = 0
    Private m_DeltaAngA As Double = 0
 
+   Private m_SelList As New List(Of Integer)
    Private m_dOffsetFiloTop As Double = 5
    Private m_dDepthFiloTop As Double = 5
+   Private m_bCornerRadius As Boolean = False
 
    Private m_dDripOffset As Double = 10
    Private m_dDripOffset2 As Double = 0
    Private m_nEngrNbr2 As Integer = 1
    Private m_dDripDepth As Double = 10
+   Private m_dEngraveDepth2 As Double = 5
    Private m_dDripShort As Double = 0
 
    Private m_CallingWndScene As Scene
@@ -415,16 +460,26 @@ Public Class SideEntityControlVM
       End Set
    End Property
 
-   Private m_Parameter4Msg As String = EgtMsg(MSG_IMPORTPAGEUC + 12)
+   Private m_Parameter4Msg As String = EgtMsg(MSG_IMPORTPAGEUC + 11) & "2"
    Public Property Parameter4Msg As String
       Get
-         Return m_Parameter4Msg      ' Accorciamento
+         Return m_Parameter4Msg      ' Affondamento2
       End Get
       Set(value As String)
          m_Parameter4Msg = value
       End Set
    End Property
 
+   Private m_Parameter5Msg As String = "RoundOff"
+   Public Property Parameter5Msg As String
+      Get
+         Return m_Parameter5Msg      ' Arrotonda
+      End Get
+      Set(value As String)
+         m_Parameter5Msg = value
+      End Set
+   End Property
+
 #End Region    ' Messages
 
 #Region "CONSTRUCTOR"
@@ -470,21 +525,26 @@ Public Class SideEntityControlVM
          Parameter2_Visibility = Visibility.Visible
          Parameter2ab_Visibility = Visibility.Hidden
          Parameter4_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Hidden
       ElseIf m_Mode = ModeOpt.FILOTOP Then
          Parameter23_Visibility = Windows.Visibility.Hidden
          Parameter2_Visibility = Visibility.Visible
          Parameter2ab_Visibility = Visibility.Hidden
+         Parameter4_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Visible
       ElseIf m_Mode = ModeOpt.ALZANDFRONT Then
          Parameter2_Visibility = Visibility.Hidden
          Parameter23_Visibility = Windows.Visibility.Visible
          Parameter2ab_Visibility = Visibility.Visible
          Parameter4_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Hidden
       Else
          ' Temporaneamente lo disabilito
          Parameter23_Visibility = Windows.Visibility.Visible
-         Parameter4_Visibility = Visibility.Collapsed
+         Parameter4_Visibility = Visibility.Visible
          Parameter2ab_Visibility = Visibility.Visible
          Parameter2_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Hidden
       End If
 
       '------------------ VALORI E TITOLI PARAMETRI 
@@ -497,12 +557,15 @@ Public Class SideEntityControlVM
 
       ElseIf m_Mode = ModeOpt.FILOTOP Then
          Parameter1Msg = EgtMsg(MSG_IMPORTPAGEUC + 10)      ' Offset
-         Dim x As String = EgtMsg(MSG_IMPORTPAGEUC + 11)
          Parameter2Msg = EgtMsg(MSG_IMPORTPAGEUC + 11)      ' Depth
+         Parameter5Msg = "Round Off"
          m_dOffsetFiloTop = GetMainPrivateProfileDouble(S_SIDES, K_FILOTOPOFFSET, 5)
          m_dDepthFiloTop = GetMainPrivateProfileDouble(S_SIDES, K_FILOTOPDEPTH, 5)
+         m_bCornerRadius = GetMainPrivateProfileInt(S_SIDES, K_FILOTOPROUNDOFF, 0) <> 0
          SetParameter1(m_dOffsetFiloTop)
          SetParameter2(m_dDepthFiloTop)
+         SetParameter5(m_bCornerRadius)
+         m_SelList.Clear()
 
       ElseIf m_Mode = ModeOpt.ENGRAVE Or m_Mode = ModeOpt.DRIP Then
          Parameter1Msg = EgtMsg(MSG_IMPORTPAGEUC + 10)      ' Offset
@@ -512,12 +575,13 @@ Public Class SideEntityControlVM
          m_nEngrNbr2 = GetMainPrivateProfileInt(S_SIDES, K_ENGRAVENUMBER2, 1)
          m_dDripDepth = GetMainPrivateProfileDouble(S_SIDES, K_DRIPDEPTH, 10)
          m_dDripShort = GetMainPrivateProfileDouble(S_SIDES, K_DRIPSHORT, 0)
+         m_dEngraveDepth2 = GetMainPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0)
          SetParameter1(m_dDripOffset)
          SetParameter2(m_dDripOffset2)
          SetParameter2a(m_nEngrNbr2)
          SetParameter2b(m_dDripOffset2)
          SetParameter3(m_dDripDepth)
-         SetParameter4(m_dDripShort)
+         SetParameter4(m_dEngraveDepth2)
 
       ElseIf m_Mode = ModeOpt.ALZANDFRONT Then
          ' definisco i nomi dei campi
@@ -536,6 +600,9 @@ Public Class SideEntityControlVM
          LoadCurrentCompo()
       End If
 
+      ' aggiorno i testi sui lati della figura
+      RefreshSideAngleText()
+
       ' Aggiorno visualizzazione
       If CallingWindow = CallingWindowOpt.COMPO Then
          EgtZoom(ZM.ALL)
@@ -609,7 +676,9 @@ Public Class SideEntityControlVM
          ' Creo le geometrie dei gocciolatoi
          CreateDripGeom(PartId)
       ElseIf m_Mode = ModeOpt.ENGRAVE Then
-         '--- ??? ---
+         ' --- ??? ---
+      ElseIf m_Mode = ModeOpt.FILOTOP Then
+         CreateFiloTopPreView(m_SelList, False)
       End If
       ' Aggiorno visualizzazione
       EgtDraw()
@@ -717,7 +786,7 @@ Public Class SideEntityControlVM
       End If
 
       ' Aggiorno interfaccia
-      If m_CallingWindow = CallingWindowOpt.DXFIMPORT Then
+      If m_CallingWindow = CallingWindowOpt.DXFIMPORT Or m_CallingWindow = CallingWindowOpt.COMPO Then
          If m_Mode = ModeOpt.SIDEANGLE Then
             For Each Entity In m_SideEntityList
                If DirectCast(Entity, SideAngleEntity).dSideAngle <> 0 Then
@@ -1101,6 +1170,9 @@ Public Class SideEntityControlVM
       Dim nCrvId = EgtGetFirstInGroup(DripLayer)
       While nCrvId <> GDB_ID.NULL
          EgtOffsetCurve(nCrvId, -m_dDripOffset, OFF_TYPE.EXTEND)
+         If m_Mode = ModeOpt.ENGRAVE Then
+            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+         End If
          nCrvId = EgtGetNext(nCrvId)
       End While
       ' Eventuali curve aggiuntive con offset2
@@ -1111,10 +1183,14 @@ Public Class SideEntityControlVM
             For i As Integer = 1 To m_nEngrNbr2
                Dim nNewId As Integer = EgtCopy(nCrvId, nCrvId, GDB_POS.AFTER)
                EgtOffsetCurve(nNewId, -i * m_dDripOffset2, OFF_TYPE.EXTEND)
+               If m_Mode = ModeOpt.ENGRAVE Then
+                  EgtSetInfo(nNewId, INFO_DEPTH, m_dEngraveDepth2)
+               End If
             Next
             nCrvId = nNextCrvId
          End While
       End If
+
       If m_Mode = ModeOpt.DRIP Then
          ' Esplodo nelle curve componenti
          nCrvId = EgtGetFirstInGroup(DripLayer)
@@ -1137,7 +1213,7 @@ Public Class SideEntityControlVM
          nCrvId = EgtGetFirstInGroup(DripLayer)
          While nCrvId <> GDB_ID.NULL
             EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
-            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+            ' EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
             EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
             nCrvId = EgtGetNext(nCrvId)
          End While
@@ -1266,8 +1342,9 @@ Public Class SideEntityControlVM
       If m_Mode = ModeOpt.SIDEANGLE Then
          WriteMainPrivateProfileString(S_SIDES, K_SIDEANGLE, DoubleToString(m_Parameter1, 3))
       ElseIf m_Mode = ModeOpt.FILOTOP Then
-         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPOFFSET, DoubleToString(m_Parameter1, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPDEPTH, DoubleToString(m_Parameter2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPOFFSET, LenToString(m_Parameter1, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPDEPTH, LenToString(m_Parameter2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPROUNDOFF, If(m_Parameter5ChBx, "1", "0"))
          ' Aggiorno affondamento del profilo
          Dim nPartId As Integer = EgtGetFirstPart()
          While nPartId <> GDB_ID.NULL
@@ -1283,10 +1360,10 @@ Public Class SideEntityControlVM
             nPartId = EgtGetNextPart(nPartId)
          End While
       ElseIf m_Mode = ModeOpt.DRIP Then
-         WriteMainPrivateProfileString(S_SIDES, K_DRIPOFFSET, DoubleToString(m_dDripOffset, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_DRIPOFFSET2, DoubleToString(m_dDripOffset2, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_DRIPDEPTH, DoubleToString(m_dDripDepth, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_DRIPSHORT, DoubleToString(m_dDripShort, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_DRIPOFFSET, LenToString(m_dDripOffset, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_DRIPOFFSET2, LenToString(m_dDripOffset2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_DRIPDEPTH, LenToString(m_dDripDepth, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_DRIPSHORT, LenToString(m_dDripShort, 3))
          For Each objEntity In m_SideEntityList
             If TypeOf objEntity Is DripEntity Then
                Dim CurrEntity As DripEntity = DirectCast(objEntity, DripEntity)
@@ -1295,11 +1372,12 @@ Public Class SideEntityControlVM
             End If
          Next
       ElseIf m_Mode = ModeOpt.ENGRAVE Then
-         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEOFFSET, DoubleToString(m_dDripOffset, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, DoubleToString(m_dDripOffset2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEOFFSET, LenToString(m_dDripOffset, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, LenToString(m_dDripOffset2, 3))
          WriteMainPrivateProfileString(S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString)
-         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, DoubleToString(m_dDripDepth, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVESHORT, DoubleToString(m_dDripShort, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVESHORT, LenToString(m_dDripShort, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3))
          For Each objEntity In m_SideEntityList
             If TypeOf objEntity Is DripEntity Then
                Dim CurrEntity As DripEntity = DirectCast(objEntity, DripEntity)
@@ -1736,8 +1814,146 @@ Public Class SideEntityControlVM
       End If
    End Sub
 
+   ' ----------------------- FILO TOP -----------------------
+   Public Sub CreateFiloTopPreView(SelList As List(Of Integer), Optional bReadInfo As Boolean = True)
+      m_SelList = SelList
+      If m_SelList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            ' verifico che lemento corrente appartenga all'elenco degli elementi selezionati
+            Dim bIsSelected As Boolean = m_SelList.Find(Function(value As Integer)
+                                                           Return value = nLayId
+                                                        End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' verifico il Layer "FiloTop" sia associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer "FiloTop"
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' lo creo
+                  nLayFiloTop = EgtCreateGroup(nPartId)
+                  EgtSetName(nLayFiloTop, "FiloTop")
+                  EgtSetInfo(nLayFiloTop, "InLoopRef", nLayId)
+                  EgtSetInfo(nLayId, "FiloTopRef", nLayFiloTop)
+               End If
+
+               ' carico i dati del filo top selezionato
+               If bReadInfo Then
+                  EgtGetInfo(nLayFiloTop, INFO_OFFSET, m_dOffsetFiloTop)
+                  EgtGetInfo(nLayFiloTop, INFO_DEPTH, m_dDepthFiloTop)
+                  Dim nVal As Integer = If(m_bCornerRadius, 1, 0)
+                  EgtGetInfo(nLayFiloTop, INFO_ROUNDOFF, nVal)
+                  m_bCornerRadius = If(nVal = 1, True, False)
+                  SetParameter1(m_dOffsetFiloTop)
+                  SetParameter2(m_dDepthFiloTop)
+                  SetParameter5(m_bCornerRadius)
+               End If
+
+               ' procedo alla creazione della curva
+               Dim nIdCompoCurve As Integer = GDB_ID.NULL
+               ' cancello un eventuale curva composita creata in precedenza
+               nIdCompoCurve = EgtGetFirstNameInGroup(nLayFiloTop, "OffsetPreView")
+               If nIdCompoCurve <> GDB_ID.NULL Then
+                  EgtErase(nIdCompoCurve)
+               End If
+               Dim nCompoCurve As New List(Of Integer)
+               ' costruisco il percorso chiuso dati i lati di contorno 
+               Dim nLine As Integer = EgtGetFirstInGroup(nLayId)
+               While nLine <> GDB_ID.NULL
+                  nCompoCurve.Add(nLine)
+                  nLine = EgtGetNext(nLine)
+               End While
+               Dim PtNearStart As Point3d
+               Dim nInfoRoundOff As Integer = If(m_bCornerRadius, 1, 0)
+
+               nIdCompoCurve = EgtCreateCurveCompoByChain(nLayFiloTop, nCompoCurve.ToArray, PtNearStart, False)
+               EgtSetName(nIdCompoCurve, "OffsetPreView")
+
+               ' salvo i dati nel layer FiloTop
+               EgtSetInfo(nLayFiloTop, INFO_OFFSET, m_dOffsetFiloTop)
+               EgtSetInfo(nLayFiloTop, INFO_DEPTH, m_dDepthFiloTop)
+               EgtSetInfo(nLayFiloTop, INFO_ROUNDOFF, nInfoRoundOff)
+
+               Dim bOk As Boolean = False
+               ' leggo che tipo di offset applicare (Round, Extend)
+               If nInfoRoundOff <> 1 Then
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dOffsetFiloTop, OFF_TYPE.EXTEND)
+               Else
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dOffsetFiloTop, OFF_TYPE.FILLET)
+               End If
+
+               ' se la generazione della curva non va a buon fine
+               If Not bOk Then
+                  EgtErase(nLayFiloTop)
+                  EgtRemoveInfo(nLayId, "FiloTopRef")
+                  EgtOutLog("Error in generation OffsetPreView in TopEgde ")
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+   ' riceve la lista dei LayerFiloTop che devono essere eliminati
+   Public Sub EraseFiloTopPreview(EraseList As List(Of Integer))
+      Dim m_EraseList As List(Of Integer) = EraseList
+      If m_EraseList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            Dim bIsSelected As Boolean = m_EraseList.Find(Function(value As Integer)
+                                                             Return value = nLayId
+                                                          End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' cerco il Layer associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' esco 
+                  Return
+               Else
+                  ' lo elimino
+                  EgtErase(nLayFiloTop)
+                  EraseList.Remove(nLayId)
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
 #End Region    ' METHODS
 
+
+
 End Class
 
 Public MustInherit Class SideEntity

Utility/OmagOFFICEDictionary.xaml

@@ -223,7 +223,11 @@
       <Setter Property="Height" Value="30"/>
    </Style>
 
-   <Style x:Key="OptionPanel_NestingToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+    <Style x:Key="OptionPanel_ToggleWrapButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="45"/>
+    </Style>
+
+    <Style x:Key="OptionPanel_NestingToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
       <Setter Property="Height" Value="60"/>
       <Setter Property="Width" Value="60"/>
    </Style>

Utility/OmagOFFICEMap.vb

@@ -120,7 +120,6 @@ Module OmagOFFICEMap
       End Get
    End Property
 
-   
    'Public ReadOnly Property refProjectVM As ProjectLibVM
    '   Get
    '      Return PhotoMap.refProjectVM