Gestione multiselezione in parcheggio

- corretta gestione angolo di rotazione pezzi con misure pollici (veniva moltiplicato per 25.4 come fosse una lunghezza) presente da ver 2.3b2
- uscendo da gestione grezzo senza alcun grezzo ora si nasconde la eventuale foto.

CompoWindow/CompoWindowVM.vb

@@ -364,6 +364,9 @@ Public Class CompoWindowVM
       ' Cancello layer regioni per selezione buchi
       Pz = EgtGetFirstGroupInGroup(GDB_ID.ROOT)
 
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As String = String.Empty
+
       While Pz <> -1
          ' imposto il contesto corrente
          EgtSetCurrentContext(CompoWindowMap.refCompoSceneHostV.CompoScene.GetCtx())
@@ -513,6 +516,9 @@ Public Class CompoWindowVM
          EgtEraseEmptyParts()
          ' Area dei nuovi pezzi
          Dim dNewArea As Double = 0
+         If nNbr > 1 Then
+            sGUICode = System.Guid.NewGuid.ToString
+         End If
          ' Se esiste il file del pezzo
          If My.Computer.FileSystem.FileExists(sTmpFile) Then
             ' eseguo inserimento
@@ -527,8 +533,15 @@ Public Class CompoWindowVM
                If m_bTrfData Then EgtSetInfo(nId2, "CsvPart", CompoWindowMap.refCompoManagerVM.sTrfOrderCode & "-" & nId2.ToString())
                ' Aggiorno l'area dei nuovi pezzi
                dNewArea += GeomCalc.GetPartArea(nId2)
-               ' Inserisco in parcheggio
+
+               ' assegno l'identificatico del pezzo, se esiste
+               If Not String.IsNullOrEmpty(sGUICode) Then
+                  Dim sPreGuid As String = EstCalc.CreatePreGuidCode(nId2)
+                  EgtSetInfo(nId2, INFO_REFGROUP, sPreGuid & sGUICode)
+               End If
+               ' muovo il pezzo nella prima posizione di parcheggio libera
                EstCalc.StoreOnePart(nId2, True)
+
                ' Aggiungo riferimento e lo inserisco in VeinMatching
                VeinMatching.SetRefOnPart(nId2)
                VeinMatching.AddPart(nId2, True)

Constants/ConstIni.vb

@@ -121,6 +121,7 @@ Module ConstIni
    Public Const K_TEXTCOLOR As String = "TextColor"
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
+   Public Const K_DRAGRETTANGLE As String = "DragRectangle"
 
    Public Const S_SPLIT As String = "Split"
    Public Const K_MOVE_LEV As String = "MoveLevel"

CurrMachWindow/CurrMachWindowV.xaml

@@ -71,7 +71,7 @@
           <!--Quality-->
           <ComboBox ItemsSource="{Binding CurrWaterjettingQualityList}"
                     SelectedItem="{Binding SelCurrWaterjettingQuality}"
-                    Visibility="{Binding CurrWaterjettingQuality_Visibility}"
+                    Visibility="{Binding CurrWaterjetting_Visibility}"
                     Margin="5,0,0,5"
                     Grid.Column="1">
           </ComboBox>

CurrMachWindow/CurrMachWindowVM.vb

@@ -290,7 +290,7 @@ Public Class CurrMachWindowVM
       End Set
    End Property
 
-   Private m_CurrWaterjetting_Visibility As Visibility
+   Private m_CurrWaterjetting_Visibility As Visibility = Visibility.Collapsed
    Public Property CurrWaterjetting_Visibility As Visibility
       Get
          Return m_CurrWaterjetting_Visibility

DxfImportWindow/DxfImportWindowVM.vb

@@ -710,6 +710,8 @@ Public Class DxfImportWindowVM
          EgtErase(EgtGetFirstNameInGroup(PartId, SELECT_REGION_LAYER))
          PartId = EgtGetNextPart(PartId)
       End While
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As New List(Of String)
       ' Scrivo testi per nesting
       SideEntityControlVM.WriteSideAngleForNest(DxfImportWindowMap.refDxfImportSceneHostV.ImportDxfScene.GetCtx())
       ' Imposto riferimento sul centro geometrico di ogni pezzo
@@ -732,10 +734,33 @@ Public Class DxfImportWindowVM
       Dim bDirect As Boolean = (GetMainPrivateProfileInt(S_NEST, K_DIRECT, 0) <> 0)
       ' Elimino eventuali precedenti pezzi vuoti
       EgtEraseEmptyParts()
+      ' creo il riferimento
+      If m_PartNum > 1 Then
+         ' per ogni pezze del file DXF creo un gruppo
+         Dim nIdTemp As Integer = EgtGetFirstPart()
+         While nIdTemp <> GDB_ID.NULL
+            Dim sPreGuid As String = CreatePreGuidCode(nIdTemp)
+            sGUICode.Add(sPreGuid & System.Guid.NewGuid.ToString)
+            nIdTemp = EgtGetNextPart(nIdTemp)
+         End While
+      End If
       ' Inserisco i pezzi nell'ambiente principale e recupero Id primo pezzo inserito
       Dim nFirstId As Integer = EgtGetLastPart()
       For nInd As Integer = 1 To m_PartNum
+         Dim nFirst2Id As Integer = EgtGetLastPart()
          EgtInsertFile(sTmpFile)
+         Dim FirstOfImport As Integer = EgtGetNextPart(nFirst2Id)
+         Dim Index As Integer = 1
+         While FirstOfImport <> GDB_ID.NULL And Index <= sGUICode.Count
+            If Not String.IsNullOrEmpty(sGUICode(Index - 1)) Then
+               EgtSetInfo(FirstOfImport, INFO_REFGROUP, sGUICode(Index - 1))
+               Index += 1
+            Else
+               Exit While
+            End If
+            FirstOfImport = EgtGetNextPart(FirstOfImport)
+         End While
+         nFirst2Id = If(nFirst2Id <> GDB_ID.NULL, EgtGetNextPart(nFirst2Id), EgtGetFirstPart())
       Next
       nFirstId = If(nFirstId <> GDB_ID.NULL, EgtGetNextPart(nFirstId), EgtGetFirstPart())
       ' Cancello il file

EgtStoneLib/ConstMach.vb

@@ -93,6 +93,9 @@ Module ConstMach
    Public Const INFO_RAW_BLOCK = "Block"
    ' Info per numero lastra nel blocco
    Public Const INFO_RAW_SLABNBR = "SlabNbr"
+   ' Info per identificazione gruppo pezzi
+   Public Const INFO_REFGROUP As String = "RefGroup"
+   Public Const INFO_COUNTERLY As String = "CounterPz"
 
    ' Contrassegno di progetto OmagCut
    Public Const NAME_PROJMARK As String = "OmagCut"

EgtStoneLib/CsvM.vb

@@ -188,6 +188,25 @@ Module CsvM
          EstCalc.SetTextColor( nRegId)
          ' Lo sposto nel gruppo speciale
          EgtRelocate(nId, nIpGrp)
+
+         ' assegno l'identificatico del pezzo, se esiste
+         If Not String.IsNullOrEmpty(CurrPart.m_sRefGuid) Then
+            ' GuidCode dovrebbe contenere 36 caratteri, il precode 5: tot = 41
+            If CurrPart.m_sRefGuid.Count <= 36 Then
+               Dim sPreGuid As String = CreatePreGuidCode(CurrPart.m_nId)
+               CurrPart.m_sRefGuid = sPreGuid & CurrPart.m_sRefGuid
+            End If
+            EgtSetInfo(CurrPart.m_nId, INFO_REFGROUP, CurrPart.m_sRefGuid)
+         End If
+         Dim nRegLayId As Integer = EgtGetFirstNameInGroup(CurrPart.m_nId, NAME_REGION)
+         ' Imposto il colore del pezzo inserito nel progetto
+         EgtSetColor(nRegLayId, CurrPart.m_cColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, CurrPart.m_cColor)
+            EntId = EgtGetNext(EntId)
+         End While
+
       Next
       EgtLuaResetGlobVar("CMP")
       EgtLuaResetGlobVar("CMP_Draw")
@@ -282,12 +301,19 @@ Module CsvM
                   ' Rimuovo dal grezzo
                   EgtRemovePartFromRawPart(nId)
                End If
+               ' recupero il Guid del pezzo corrente (potrebbe essere stato modificato a causa di rotazioni quando il pezzo è passato in parcheggio)
+               Dim sCurrRefGuid As String = String.Empty
+               EgtGetInfo(nId, INFO_REFGROUP, sCurrRefGuid)
                ' Eventuale cancellazione per VM
                VeinMatching.OnRemovePart(nId)
                ' Cancello il pezzo
                EgtErase(nId)
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio (se sRefGroup<>"")
+               EstCalc.CountPartInFamily(sCurrRefGuid)
                ' Aggiorno il contatore
                CurrPart.m_nToNest += 1
+               ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+               GetFamilyGroupInPark()
                ' Esco
                Return True
             End If
@@ -337,6 +363,9 @@ Module CsvM
          EgtLuaGetGlobNumVar("CSV.DIMY" & sN, OnePart.m_dDimY)
          EgtLuaGetGlobNumVar("CSV.TH" & sN, OnePart.m_dTh)
          OnePart.m_nOriInd = i
+         If OnePart.m_nCount > 1 Then
+            OnePart.m_sRefGuid = System.Guid.NewGuid.ToString
+         End If
          ' inserisco in lista
          m_CsvPartList.Add(OnePart)
       Next
@@ -406,6 +435,7 @@ Module CsvM
             Writer.WriteLine("DY=" & DoubleToString(CurrPart.m_dDimY, 4))
             Writer.WriteLine("Th=" & DoubleToString(CurrPart.m_dTh, 4))
             Writer.WriteLine("OIn=" & CurrPart.m_nOriInd.ToString())
+            Writer.WriteLine("Guid=" & CurrPart.m_sRefGuid)
          Next
          ' Terminatore
          Writer.WriteLine("[END]")
@@ -492,6 +522,8 @@ Module CsvM
                      StringToDouble(sItems(1), OnePart.m_dTh)
                   ElseIf sItems(0) = "OIn" Then
                      StringToInt(sItems(1), OnePart.m_nOriInd)
+                  ElseIf sItems(0) = "Guid" Then
+                     OnePart.m_sRefGuid = sItems(1).Trim
                   End If
                End If
             End If
@@ -528,4 +560,8 @@ Public Class CsvPart
    Public m_dTh As Double = 0
    Public m_nOriInd As Integer = 0
    Public m_nId As Integer = GDB_ID.NULL
+   ' definsco il riferimento al gruppo
+   Public m_sRefGuid As String = System.Guid.NewGuid.ToString
+   ' definisco il colore del gruppo che sto inserendo
+   Public m_cColor As Color3d = CompoColor(IniFile.m_sIniFile)
 End Class

EgtStoneLib/EstCalc.vb

@@ -51,6 +51,68 @@ Module EstCalc
       End If
    End Function
 
+#Region "PreGuidCode"
+
+   ' recupero i primi 5 caratteri della stringa
+   Friend Function GetPreGuidCode(sGuidCode As String) As String
+      If sGuidCode.Count > 5 Then
+         Return sGuidCode(0) & sGuidCode(1) & sGuidCode(2) & sGuidCode(3) & sGuidCode(4)
+      End If
+      Return String.Empty
+   End Function
+
+   ' sostituisce i primi 5 caratteri della stringa con qualle passata
+   Friend Function UppDateGuidCode(ByRef sGuidCode As String, sPreGuidCode As String) As Boolean
+      If sPreGuidCode.Count = 5 Then
+         sGuidCode = sGuidCode.Remove(0, 5)
+         sGuidCode = sPreGuidCode & sGuidCode
+         Return True
+      End If
+      Return False
+   End Function
+
+   ' restituisce 5 caratteri 
+   Friend Function CreatePreGuidCode(nId As Integer) As String
+      ' recupero il frame dell'oggetto
+      Dim frGlobFrame As New Frame3d
+      If Not EgtGetGroupGlobFrame(nId, frGlobFrame) Then
+         Return String.Empty
+      End If
+      ' recupero il suo versore
+      Dim vtX As Vector3d = frGlobFrame.VersX
+      Dim Len As Double
+      Dim AngV As Double
+      Dim AngH As Double
+      vtX.ToSpherical(Len, AngV, AngH)
+      ' costruisco il codice (6 caratteri!) che identifica la posizione del pezzo in parcheggio
+      Dim sPreGuid As String = GetDirectionCode(AngH)
+      Return sPreGuid
+   End Function
+
+   Friend Function GetDirectionCode(dVal As Double) As String
+      Dim bIsNegative As Boolean = False
+      If dVal < 0 Then
+         dVal = dVal + (-1)
+         bIsNegative = True
+      End If
+      Dim sVal As String = DoubleToString(dVal * 1000, 0)
+      Dim nCount As Integer = sVal.Count
+      For Index As Integer = 1 To 4 - nCount
+         sVal = "0" & sVal
+      Next
+      Dim vVal As Char() = {"+"c, "1"c, "0"c, "0"c, "0"c}
+      If bIsNegative Then
+         vVal = {"-"c, sVal(0), sVal(1), sVal(2), sVal(3)}
+      Else
+         vVal = {"+"c, sVal(0), sVal(1), sVal(2), sVal(3)}
+      End If
+      ' ricostruisco la stringa dotata di segno
+      sVal = vVal(0) & vVal(1) & vVal(2) & vVal(3) & vVal(4)
+      Return sVal
+   End Function
+
+#End Region    ' PreGiudCode
+
    '--------------------------------------------------------------------------------------------------
    Private m_nRawId As Integer = GDB_ID.NULL
    Public Function GetRawId() As Integer
@@ -626,6 +688,16 @@ Module EstCalc
       End If
       ' Gestione risultato nesting
       If bFit Then
+         '---------------------- COUNTER PART ----------------------
+         Dim sRefGroup As String = String.Empty
+         If EgtGetInfo(nId, INFO_REFGROUP, sRefGroup) Then
+            ' spengo il layer che contiene il contatore
+            Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nId, INFO_COUNTERLY)
+            EgtSetStatus(nCounterLayer, GDB_ST.OFF)
+            ' aggiorno il layer che indica il numero di pezzi in parcheggio
+            CountPartInFamily(sRefGroup)
+         End If
+         '---------------------- COUNTER PART ----------------------
          ' Eventuale aggiunta solido per taglio da sotto
          UpdateSolidForDrip(nId)
          Return True
@@ -702,12 +774,198 @@ Module EstCalc
       Return True
    End Function
 
+#Region "Manager Counter Part"
+
+   ' lista delle famiglie di pezzi in parcheggio
+   Public m_ListOfGroupInPark As New List(Of FamilyPart)
+   ' se seleniozato il layer CounterPz
+   Public m_bIsCounterLy As Boolean = False
+   Public m_nCurrNubrOfParts As Integer = 0
+
+   ' creo la lista delle famiglie che popolano il parcheggio
+   Public Sub GetFamilyGroupInPark()
+      m_ListOfGroupInPark.Clear()
+      Dim nIdInPark As Integer = EgtGetFirstPart()
+      While nIdInPark <> GDB_ID.NULL
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         If EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup) Then
+            Dim bExists As Boolean = False
+            For Each sItem As FamilyPart In m_ListOfGroupInPark
+               If sRefGroup = sItem.sRefGuid Then
+                  bExists = True
+                  Exit For
+               End If
+            Next
+            If Not bExists Then
+               m_ListOfGroupInPark.Add(New FamilyPart(sRefGroup, nIdInPark))
+            End If
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+   End Sub
+
+   Public Sub CountPartInFamily(sRefGuid As String)
+      If String.IsNullOrEmpty(sRefGuid) Then Return
+      Dim nCount As Integer = 0
+      Dim nIdInPark As Integer = EgtGetFirstPart()
+      ' conto il nuero di pezzi del gruppo inidcato
+      While nIdInPark <> GDB_ID.NULL
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup)
+         If sRefGroup = sRefGuid Then
+            nCount += 1
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+      ' aggiorno il contatore dei pezzi del gruppo
+      nIdInPark = EgtGetFirstPart()
+      While nIdInPark <> GDB_ID.NULL
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup)
+         If sRefGroup = sRefGuid Then
+            Dim nId As Integer = EgtGetFirstNameInGroup(nIdInPark, INFO_COUNTERLY)
+            If nId <> GDB_ID.NULL Then
+               Dim m_IdCounterTextas As Integer = EgtGetFirstInGroup(nId)
+               EgtModifyText(m_IdCounterTextas, "# " & nCount.ToString)
+            End If
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+   End Sub
+
+   Public Sub SelectPartInFaimily(sRefGuid As String, nNbrOfSelection As Integer)
+      ' aggiorno il contatore dei pezzi del gruppo
+      Dim nIdInPark As Integer = EgtGetFirstPart()
+      Dim nCounter As Integer = 0
+      While nIdInPark <> GDB_ID.NULL And nCounter < nNbrOfSelection
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup)
+         If sRefGroup = sRefGuid Then
+            EgtSelectObj(nIdInPark)
+            nCounter += 1
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+   End Sub
+
+   Public Sub DeselectPartInFaimily(sRefGuid As String)
+      ' aggiorno il contatore dei pezzi del gruppo
+      Dim nIdInPark As Integer = EgtGetFirstPart()
+      While nIdInPark <> GDB_ID.NULL
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup)
+         If sRefGroup = sRefGuid Then
+            EgtDeselectObj(nIdInPark)
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+   End Sub
+
+   Public Function ParkInGroupFamily(nId As Integer) As Boolean
+      ' se pezzo appartenente ad un gruppo
+      Dim sRefGroup As String = String.Empty
+      Dim Element As FamilyPart
+      If EgtGetInfo(nId, INFO_REFGROUP, sRefGroup) Then
+         ' verifico se esiste un pezzo dello stesso gruppo in parcheggio
+         Dim nNewLayer As Integer
+         Dim ptMin As Point3d
+         Dim ptMax As Point3d
+         For Each sItem As FamilyPart In m_ListOfGroupInPark
+            If sRefGroup = sItem.sRefGuid Then
+               ' creo un nuovo layer per contenere l'informazione del numero di pezzi da inserire
+               If EgtGetFirstNameInGroup(nId, INFO_COUNTERLY) = GDB_ID.NULL Then
+                  nNewLayer = EgtCreateGroup(nId)
+                  EgtSetName(nNewLayer, INFO_COUNTERLY)
+                  EgtSetColor(nNewLayer, New Color3d(0, 0, 0))
+                  EgtGetBBox(nId, GDB_BB.STANDARD, ptMin, ptMax)
+                  EgtCreateText(nNewLayer, New Point3d((ptMin.x + ptMax.x) / 2, ptMin.y - sItem.nHText - 20, ptMin.z), "# ???", sItem.nHText, GDB_RT.LOC)
+               Else
+                  ' Accendo il layer che contiene il contatore
+                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nId, INFO_COUNTERLY)
+                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
+               End If
+
+               ' calcolo lo spostamento del pezzo
+               Dim PtMinInRaw As Point3d
+               Dim PtMaxInRaw As Point3d
+               EgtGetBBoxGlob(nId, GDB_BB.STANDARD, PtMinInRaw, PtMaxInRaw)
+               Dim vtMoveToStorage As New Vector3d
+               vtMoveToStorage = sItem.PtStorage() - PtMinInRaw
+               EgtMove(nId, vtMoveToStorage, GDB_RT.GLOB)
+
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio
+               CountPartInFamily(sRefGroup)
+               Return True
+            End If
+         Next
+         ' inserisco il primo pezzo del gruppo nel parcheggio
+         Element = New FamilyPart(sRefGroup, nId)
+         m_ListOfGroupInPark.Add(Element)
+         ' creo un nuovo layer per contenere l'informazione del numero di pezzi da inserire
+         If EgtGetFirstNameInGroup(nId, INFO_COUNTERLY) = GDB_ID.NULL Then
+            nNewLayer = EgtCreateGroup(nId)
+            EgtSetName(nNewLayer, INFO_COUNTERLY)
+            EgtSetColor(nNewLayer, New Color3d(0, 0, 0))
+            EgtGetBBox(nId, GDB_BB.STANDARD, ptMin, ptMax)
+            ' posso migliorarei lposizioanamento in funzione della dimensione della scritta...
+            EgtCreateText(nNewLayer, New Point3d((ptMin.x + ptMax.x) / 2, ptMin.y - Element.nHText - 20, ptMin.z), "# 1", Element.nHText, GDB_RT.LOC)
+         Else
+            ' Accendo il layer che contiene il contatore
+            Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nId, INFO_COUNTERLY)
+            EgtSetStatus(nCounterLayer, GDB_ST.ON_)
+            ' aggiorno il layer che indica il numero di pezzi in parcheggio
+            CountPartInFamily(sRefGroup)
+         End If
+      End If
+      Return False
+   End Function
+
+   ' verifico se il pezzo ha un gruppo che contiene le informazioni per il taglio
+   Public Function IsInRaw(nIdGroup As Integer) As Boolean
+      ' verifico che il pezzo sia veramente uin parcheggio
+      Dim nPV As Integer = EgtGetFirstNameInGroup(nIdGroup, "PV")
+      If nPV <> GDB_ID.NULL Then
+         ' verifico che non ci siano delle lavorazioni
+         If EgtGetFirstInGroup(nPV) <> GDB_ID.NULL Then
+            Return True
+         End If
+      End If
+      Return False
+   End Function
+#End Region    ' Manager Counter Part
+
    Public Function StoreOnePart(ByVal nId As Integer, Optional ByVal bForced As Boolean = False) As Boolean
       ' Se pezzo in grezzo, metto in parcheggio (sempre possibile)
       If bForced OrElse
          (m_nRawId <> GDB_ID.NULL AndAlso EgtGetParent(nId) = m_nRawId) Then
          ' Ripristino lo stato originale
-         PreRemoveOnePart( nId)
+         PreRemoveOnePart(nId)
+
+         '---------------------- COUNTER PART ----------------------
+         ' se esiste almento un pezzo del gruppo in parcheggio esco
+         If ParkInGroupFamily(nId) Then Return True
+         '---------------------- COUNTER PART ----------------------
+
          ' Parcheggio
          PackPartInStore(nId)
          ' Aggiusto la posizione in Z
@@ -730,7 +988,8 @@ Module EstCalc
       ' Parcheggio
       Const STORE_LARGH As Double = 6000
       Const STORE_DIST As Double = 200
-      Const STORE_OFFS As Double = 20
+      ' 40 il Font usato per indicare il numero di pezzi in parcheggio "# N"
+      Const STORE_OFFS As Double = 20 + 40 + 20
       Dim dStXmin As Double = b3Tab.Min().x - 0.5 * (STORE_LARGH - b3Tab.DimX())
       Return EgtPackBox(nId, dStXmin, -INFINITO, dStXmin + STORE_LARGH, b3Tab.Min().y - STORE_DIST, STORE_OFFS, False)
    End Function
@@ -831,3 +1090,4 @@ Module EstCalc
    End Function
 
 End Module
+

MainWindow/MainWindowM.vb

@@ -195,8 +195,8 @@ Public Class MainWindowM
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace( sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2401, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2401, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2402, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2402, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.OFFICE_BASE)
       ' Inizializzazione generale di EgtInterface

My Project/AssemblyInfo.vb

@@ -69,6 +69,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.1.3")>
-<Assembly: AssemblyFileVersion("2.4.1.3")>
+<Assembly: AssemblyVersion("2.4.2.3")>
+<Assembly: AssemblyFileVersion("2.4.2.3")>
 

OmagOFFICE.vbproj

@@ -255,6 +255,10 @@
       <DependentUpon>SplitModeV.xaml</DependentUpon>
     </Compile>
     <Compile Include="OptionPanel\MachiningTab\SplitModeVM.vb" />
+    <Compile Include="OptionPanel\NestingTab\MultiSelectionV.xaml.vb">
+      <DependentUpon>MultiSelectionV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="OptionPanel\NestingTab\MultiSelectionVM.vb" />
     <Compile Include="OptionPanel\NestingTab\NestingTabV.xaml.vb">
       <DependentUpon>NestingTabV.xaml</DependentUpon>
     </Compile>
@@ -437,6 +441,10 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="OptionPanel\NestingTab\MultiSelectionV.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="OptionPanel\NestingTab\NestingTabV.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>

OptionPanel/NestingTab/MultiSelectionV.xaml

@@ -0,0 +1,41 @@
+<EgtWPFLib5:EgtCustomWindow x:Class="MultiSelectionV"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:OmagOFFICE="clr-namespace:OmagOFFICE"
+   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+   Title="{Binding TitleMsg}"
+   IsMinimizable="False"
+   IsClosable="False"
+   ShowInTaskbar="False"
+   Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
+   WindowStartupLocation="CenterOwner"
+   Width="270" Height="150"
+   ResizeMode="NoResize">
+
+    <DockPanel Margin="5,5,5,0">
+
+        <UniformGrid Columns="2" 
+                     DockPanel.Dock="Top"
+                     Margin="0,15,0,15">
+            <TextBlock Text="{Binding SelectionMsg}"/>
+            <TextBox Text="{Binding nNbrOfParts}"/>
+        </UniformGrid>
+
+        <UniformGrid Columns="4"
+                   DockPanel.Dock="Bottom"
+                   Margin="25,0,25,5">
+            <Button Command="{Binding OkCommand}"
+                    Style="{StaticResource OptionPanel_TextButton}"
+                    Content="{Binding OkMsg}">
+            </Button>
+            <ToggleButton Visibility="Hidden" />
+            <ToggleButton Visibility="Hidden" />
+            <Button Command="{Binding CancelCommand}"
+                    Style="{StaticResource OptionPanel_TextButton}"
+                    Content="{Binding CancelMsg}">
+            </Button>
+        </UniformGrid>
+
+    </DockPanel>
+
+    </EgtWPFLib5:EgtCustomWindow>

OptionPanel/NestingTab/MultiSelectionV.xaml.vb

@@ -0,0 +1,15 @@
+Public Class MultiSelectionV
+
+   Private WithEvents m_MultiSelectionVM As MultiSelectionVM
+
+   Sub New(Owner As Window, MultiSelVM As MultiSelectionVM)
+      MyBase.New(Owner)
+      ' This call is required by the designer.
+      InitializeComponent()
+      Me.DataContext = MultiSelVM
+      ' Assegno al riferimento locale al VM il VM preso dal DataContext
+      m_MultiSelectionVM = MultiSelVM
+      Me.Show()
+   End Sub
+
+End Class

OptionPanel/NestingTab/MultiSelectionVM.vb

@@ -0,0 +1,97 @@
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class MultiSelectionVM
+   Inherits VMBase
+
+   Private m_sRefGuidOfPart As String = String.Empty
+
+   Public ReadOnly Property TitleMsg As String
+      Get
+         Return "Multiple selection"
+      End Get
+   End Property
+   Public ReadOnly Property SelectionMsg As String
+      Get
+         Return "Number of Parts"
+      End Get
+   End Property
+
+   Public ReadOnly Property OkMsg As String
+      Get
+         Return "Ok"
+      End Get
+   End Property
+
+   Public ReadOnly Property CancelMsg As String
+      Get
+         Return "Cancel"
+      End Get
+   End Property
+
+   Private m_MultiSelectionV As MultiSelectionV
+   Public Sub SetMultiSelectionV(MultiSel As MultiSelectionV)
+      m_MultiSelectionV = MultiSel
+   End Sub
+
+   Private m_nNbrOfParts As Integer
+   Public Property nNbrOfParts As String
+      Get
+         Return m_nNbrOfParts.ToString
+      End Get
+      Set(value As String)
+         Dim nVal As Integer = 0
+         StringToInt(value, nVal)
+         m_nNbrOfParts = nVal
+         NotifyPropertyChanged("nNbrOfParts")
+      End Set
+   End Property
+
+   Private m_cmdOk As ICommand
+   Private m_cmdCancel As ICommand
+
+   Public ReadOnly Property OkCommand As ICommand
+      Get
+         If m_cmdOk Is Nothing Then
+            m_cmdOk = New Command(AddressOf OkCmd)
+         End If
+         Return m_cmdOk
+      End Get
+   End Property
+
+   Public Sub OkCmd(ByVal param As Object)
+      ' il numero di elementi indicato è corretto
+      ' deseleziono il pezzo corrente
+      DeselectPartInFaimily(m_sRefGuidOfPart)
+      Select Case m_nNbrOfParts
+         Case 0    ' Annulla
+            ' continuo senza eseguire niente
+         Case Else
+            ' seleziono il numero di pezzi indicati
+            SelectPartInFaimily(m_sRefGuidOfPart, m_nNbrOfParts)
+      End Select
+      ' chiudo la finestra
+      m_MultiSelectionV.Close()
+      EgtDraw()
+   End Sub
+
+   Public ReadOnly Property CancelCommand As ICommand
+      Get
+         If m_cmdCancel Is Nothing Then
+            m_cmdCancel = New Command(AddressOf CancelCmd)
+         End If
+         Return m_cmdCancel
+      End Get
+   End Property
+
+   Public Sub CancelCmd(ByVal param As Object)
+      ' chiudo la fiestra senza eseguire niente
+      m_MultiSelectionV.Close()
+      EgtDraw()
+   End Sub
+
+   Sub New(CurrNumberOfParts As Integer, sRefGuid As String)
+      m_nNbrOfParts = CurrNumberOfParts
+      m_sRefGuidOfPart = sRefGuid
+   End Sub
+End Class

OptionPanel/NestingTab/NestingTabV.xaml

@@ -24,7 +24,7 @@
               Command="{Binding ImportDxfCommand}">
          <Image Source="/Resources/NestingTab/ImportDxf.png" Stretch="Uniform"/>
       </Button>
-      <ToggleButton Grid.Column="4" Grid.Row="0"
+      <ToggleButton Grid.Column="4" Grid.Row="0"                
               Style="{StaticResource OptionPanel_NestingToggleButton}"
               IsChecked="{Binding CsvImport_IsChecked}">
          <Image Source="/Resources/NestingTab/ImportCsv.png" Stretch="Uniform"/>
@@ -148,11 +148,24 @@
               Margin="2.5,0,0,0"/>
    </UniformGrid>
 
-   <Button Content="{Binding RemovePartMsg}"
-           Style="{StaticResource OptionPanel_TextButton}"
-           Command="{Binding RemovePartCommand}"
-           Margin="0,0,0,5"/>
+    <Grid Margin="0,0,-2.5,5">
+        <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="1*"/>
+            <ColumnDefinition Width="1*"/>
+        </Grid.ColumnDefinitions>
+        <Button Content="{Binding RemovePartMsg}"
+                Grid.ColumnSpan="{Binding DragRettangle_Cl_Span}"
+                Style="{StaticResource OptionPanel_TextButton}"
+                Command="{Binding RemovePartCommand}"
+                Margin="0,0,2.5,0"/>
+        <ToggleButton Content="{Binding DragRettangleMsg}" Grid.Column="1"
+                Visibility="{Binding DragRettangle_Visibility}"         
+                Style="{StaticResource OptionPanel_ToggleButton}"
+                IsChecked="{Binding bDragRettangle}"
+                Margin="2.5,0,2.5,0"/>
+    </Grid>
 
+   
    <UniformGrid Columns="2" Margin="0,0,0,5">
       <Button Content="{Binding SelectAllMsg}"
               Style="{StaticResource OptionPanel_TextButton}"

OptionPanel/NestingTab/NestingTabVM.vb

@@ -35,6 +35,18 @@ Public Class NestingTabVM
    Private m_bTrfData As Boolean = False
    Private m_bCsvData As Boolean = False
 
+   ' Id del rettangolo, del traglio e della curva da modificare tramite Drag
+   Private m_nIdSelectedOutLoopRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedRegionRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedSawRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedCurvRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedTextRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedTextTopRettangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedFlatSurfRettangle As Integer = GDB_ID.NULL
+   Private m_SideListRettangle(4) As Integer
+   Private m_sTextContent As String = String.Empty
+
+
    Private m_CsvImportWindow As CsvWindowV
    Friend ReadOnly Property CsvImportWindow As CsvWindowV
       Get
@@ -103,8 +115,7 @@ Public Class NestingTabVM
       End Get
       Set(value As String)
          Dim dValue As Double
-         'StringToDouble(value, m_dRotationAngle)
-         If StringToLen(value, dValue) Then
+         If StringToDouble(value, dValue) Then
             If dValue < 0 Then
                dValue = 0
             ElseIf dValue > 180 Then
@@ -161,6 +172,12 @@ Public Class NestingTabVM
       End Get
    End Property
 
+   Public ReadOnly Property DragRettangleMsg As String
+      Get
+         Return "Drag Rectangle"
+      End Get
+   End Property
+
    Public ReadOnly Property SelectAllMsg As String
       Get
          Return EgtMsg(MSG_NESTPAGEUC + 4)
@@ -211,6 +228,13 @@ Public Class NestingTabVM
 #Region "CONSTRUCTOR"
 
    Sub New()
+      If (GetMainPrivateProfileInt(S_NEST, K_DRAGRETTANGLE, 1) <> 0) Then
+         m_DragRettangle_Visibility = Visibility.Visible
+      Else
+         m_DragRettangle_Visibility = Visibility.Collapsed
+      End If
+      NotifyPropertyChanged("DragRettangle_Visibility")
+      NotifyPropertyChanged("DragRettangle_Cl_Span")
       ' Creo riferimento a questa classe in OmagOFFICEMap
       OmagOFFICEMap.SetRefNestingTabVM(Me)
    End Sub
@@ -389,8 +413,29 @@ Public Class NestingTabVM
                If Not EgtGetPartPartClusterCenterGlob(nId, ptCen) Then Return False
                ' Rotazione del pezzo attorno al suo centro
                EgtRotate(nId, ptCen, Vector3d.Z_AX(), dAngRotDeg, GDB_RT.GLOB)
-               ' Sistemazione nel parcheggio
-               PackPartInStore(nId)
+
+               '---------------------- COUNTER PART ----------------------
+               ' Aggiorno il Guid assegnando la nuova rotazione
+               Dim sRefGroup As String = String.Empty
+               If EgtGetInfo(nId, INFO_REFGROUP, sRefGroup) Then
+                  Dim sCurrRefGroup As String = sRefGroup
+                  If UppDateGuidCode(sRefGroup, CreatePreGuidCode(nId)) Then
+                     EgtSetInfo(nId, INFO_REFGROUP, sRefGroup)
+                  End If
+                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
+                  CountPartInFamily(sCurrRefGroup)
+               End If
+               ' se esiste almento un pezzo del gruppo in parcheggio esco
+               If Not ParkInGroupFamily(nId) Then
+                  PackPartInStore(nId)
+               End If
+               ' ricarico l'lelenco dei pezzi in parcheggio
+               GetFamilyGroupInPark()
+               '---------------------- COUNTER PART ----------------------
+
+
+               '' Sistemazione nel parcheggio
+               'PackPartInStore(nId)
             End If
             ' Passo al successivo selezionato
             nId = EgtGetNextSelectedObj()
@@ -506,8 +551,322 @@ Public Class NestingTabVM
       Return True
    End Function
 
+#Region "DRAG RETTANGLE"
+
+   ' funzione chiamata da OnMyMouseMoveScene: verifica che la selezione sia corretta (deve essere il lato di una figura rettangolare)
+   Private Sub OnMyMouseDownSceneSelSideRettangle(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Si può selezionare solo con il tasto sinistro e se il bottone TEST Attivo
+      If e.Button <> Windows.Forms.MouseButtons.Left Then
+         Return
+      End If
+      ' Verifico se selezionato indicativo di pezzo
+      EgtSetObjFilterForSelWin(False, True, False, False, False)
+      Dim nSelMy As Integer
+      EgtSelect(e.Location, Scene.DIM_SEL, Scene.DIM_SEL, nSelMy)
+      Dim nIdMy As Integer = EgtGetFirstObjInSelWin()
+      While nIdMy <> GDB_ID.NULL
+         Dim sLayer As String = String.Empty
+         ' layer di origine
+         Dim nIdParent As Integer = EgtGetParent(nIdMy)
+         ' recupero il nome del Layer
+         EgtGetName(nIdParent, sLayer)
+         ' solo se il nome del layer è quello associato ad un lato esterno allora procedo con l'evidenziazione
+         If sLayer = NAME_OUTLOOP Then
+            If EgtGetType(nIdMy) = GDB_TY.CRV_LINE Then
+               ' -------------------------------- INIZIO VERIFICHE --------------------------------
+               m_nIdSelectedOutLoopRettangle = nIdParent
+               If Not IsRettangle(m_SideListRettangle) Then
+                  'm_CurrProjPage.ClearMessage()
+                  'm_CurrProjPage.SetWarningMessage("Non è un rettangolo (0)")
+                  Return
+               End If
+               ' recupero il gruppo della lavorazione associata
+               Dim nIdParentPart As Integer = EgtGetParent(nIdParent)
+               Dim nIdPV As Integer = EgtGetFirstNameInGroup(nIdParentPart, "PV")
+               ' se non esiste un gruppo di lavorazione associato allora esco
+               If nIdPV = GDB_ID.NULL Then
+                  'm_CurrProjPage.ClearMessage()
+                  'm_CurrProjPage.SetWarningMessage("Pezzo in parcheggio (1)")
+                  Return
+               End If
+               ' se esiste ma è vuoto (pezzo scaricato da tavola)
+               If EgtGetFirstInGroup(nIdPV) = GDB_ID.NULL Then
+                  'm_CurrProjPage.ClearMessage()
+                  'm_CurrProjPage.SetWarningMessage("Pezzo in parcheggio (2)")
+                  Return
+               End If
+               ' Devo verificare che sia una lavorazione solo di lama?
+               Dim nIdSaw As Integer = EgtGetFirstNameInGroup(nIdPV, "Saw" & nIdMy.ToString)
+               ' -------------------------------- FINE VERIFICHE --------------------------------
+
+               If Not EgtGetGroupObjs(nIdSaw) Then
+                  m_nIdSelectedSawRettangle = nIdSaw
+                  m_nIdSelectedCurvRettangle = nIdMy
+
+                  m_nIdSelectedRegionRettangle = EgtGetFirstNameInGroup(nIdParentPart, NAME_REGION)
+                  ' recupero i testi cintenuti nel layer Region
+                  If m_nIdSelectedRegionRettangle <> GDB_ID.NULL Then
+                     Dim nCurrId As Integer = EgtGetFirstInGroup(m_nIdSelectedRegionRettangle)
+                     While nCurrId <> GDB_ID.NULL
+                        If EgtGetType(nCurrId) = GDB_TY.EXT_TEXT Then
+                           Dim sVal As String = String.Empty
+                           EgtTextGetContent(nCurrId, sVal)
+                           If sVal = "*TOP*" Then
+                              m_nIdSelectedTextTopRettangle = nCurrId
+                           Else
+                              m_nIdSelectedTextRettangle = nCurrId
+                              m_sTextContent = GetMyRettangleText(sVal)
+                           End If
+                        ElseIf EgtGetType(nCurrId) = GDB_TY.SRF_FRGN Then
+                           m_nIdSelectedFlatSurfRettangle = nCurrId
+                        End If
+                        nCurrId = EgtGetNext(nCurrId)
+                     End While
+                  End If
+                  ' seleziono ed evidenzio il lato selezionato
+                  EgtSelectObj(nIdSaw)
+                  EgtSetMark(nIdSaw)
+                  EgtSelectObj(nIdMy)
+                  EgtDraw()
+                  Exit While
+               End If
+            End If
+            ' se le'elemto corrente non è una linea
+         End If
+         ' se le'elemto corrente non appartiene al layer OutLoop passo al prossimo elemento dell'elenco
+         nIdMy = EgtGetNextObjInSelWin()
+      End While
+   End Sub
+
+   ' restituisce il valore del Text ripulito dalle dimensioni
+   Private Function GetMyRettangleText(sTextPz As String) As String
+      ' da DrawPageUC.xaml.vb/MultipleInsert
+      Dim sText As String = String.Empty
+      If sTextPz.Contains("<br/>") Then
+         Dim nLastIndex As Integer = sTextPz.LastIndexOf(">")
+         sText = sTextPz.Remove(nLastIndex + 1)
+         Return sText
+      End If
+      If sTextPz.Contains("  ") Then
+         Dim sInfo() As String = sTextPz.Split(" "c)
+         If sInfo.Count > 3 Then
+            Return sText = sInfo(0) & "  " & sInfo(1) & "  "
+         End If
+      End If
+      Return sText
+   End Function
+
+   ' verifico che la figura selezionata sia realmente un rettangolo
+   Private Function IsRettangle(ByRef IdSideList() As Integer) As Boolean
+      ' creo una lista con i lati del rettangolo
+      Dim nCounter As Integer = 0
+      ' recupero i lati dal leyer "OutLoop"
+      Dim IdSideRettangle As Integer = EgtGetFirstInGroup(m_nIdSelectedOutLoopRettangle)
+      While IdSideRettangle <> GDB_ID.NULL And nCounter < 4
+         Dim sVal As String = String.Empty
+         Dim dPrevAng As Double = 0
+         EgtGetInfo(IdSideRettangle, "PrevAng", sVal)
+         StringToDouble(sVal, dPrevAng)
+         Dim dNextAng As Double = 0
+         EgtGetInfo(IdSideRettangle, "NextAng", sVal)
+         StringToDouble(sVal, dNextAng)
+         ' se gli angoli non sono retti allora esco senza caricare il lato corrente
+         If Math.Abs(dPrevAng - 90) > EPS_ANG_SMALL OrElse Math.Abs(dNextAng - 90) > EPS_ANG_SMALL Then
+            Exit While
+         End If
+         IdSideList(nCounter) = IdSideRettangle
+         nCounter += 1
+         IdSideRettangle = EgtGetNext(IdSideRettangle)
+      End While
+      ' verifico che siano solo quattro lati
+      If IdSideRettangle = GDB_ID.NULL And nCounter = 4 Then
+         ' solo se la figura ha 4 lati ortogonali
+         Return True
+      End If
+
+      m_nIdSelectedOutLoopRettangle = GDB_ID.NULL
+      ' la figura presenta più/meno di 4 lati    
+      Return False
+   End Function
+
+   ' recupero le informazioni correnti per sapere se la figura è mdificabile
+   Private Function GetRettangleInfoScale(ByRef frFixed As Frame3d, ByRef MaxLen As Double, ByRef MinLen As Double) As Vector3d
+      ' determino la direzione del lato selezionato
+      Dim vtDirSelectedCurv As New Vector3d
+      EgtStartVector(m_nIdSelectedCurvRettangle, GDB_ID.ROOT, vtDirSelectedCurv)
+
+      ' recupero il lato successivo a quello selezionato 
+      Dim Index As Integer = 0
+      Dim Len As Double = 0
+      For Ind As Integer = 0 To 3
+         If m_SideListRettangle(Ind) = m_nIdSelectedCurvRettangle Then
+            ' verifico se esiste un lato Precedente altrimenti recupero l'ultimo della lista
+            If Ind = 0 Then
+               Index = 3
+            Else
+               Index = Ind - 1
+            End If
+         End If
+      Next
+      ' recupero la dimensione del lato
+      EgtCurveLength(m_SideListRettangle(Index), MaxLen)
+      EgtCurveLength(m_nIdSelectedCurvRettangle, MinLen)
+
+      ' verifico che il lato selezionato sia il maggiore
+      If MinLen > MaxLen Then Return Nothing
+
+      ' determimo il versore dal lato appena calcolato
+      Dim vtDir As New Vector3d
+
+      EgtStartVector(m_SideListRettangle(Index), GDB_ID.ROOT, vtDir)
+      vtDir.Normalize()
+      Dim dProjectionBaseX As Double = vtDir * Vector3d.X_AX
+      Dim ptFixed As New Point3d
+      EgtStartPoint(m_SideListRettangle(Index), GDB_ID.ROOT, ptFixed)
+
+      Dim vtPerp As New Vector3d(vtDir.x, vtDir.y, vtDir.z)
+      vtPerp.Rotate(Vector3d.Z_AX, 90)
+
+      ' determino il Frame corrente
+      frFixed = New Frame3d(ptFixed, vtDir, vtPerp, Vector3d.Z_AX)
+
+      Return vtDir
+
+   End Function
+
+   ' funzione chiamata da OnMyMouseMoveScene: gestisce la modifica lungo una dimensione del rettangolo selezionato
+   Private Sub OnMyMouseMoveSawRettangle(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Se drag non abilitato o già in esecuzione, esco
+      If Not m_bDrag Or m_bDragging Then Return
+      ' Se primo movimento di drag, verifico di aver superato la soglia di movimento in pixel
+      If m_bDragToStart Then
+         If Math.Abs(e.Location.X - m_locPrev.X) < m_nRestRadius And
+            Math.Abs(e.Location.Y - m_locPrev.Y) < m_nRestRadius Then
+            Return
+         End If
+         m_bDragToStart = False
+      End If
+
+      ' riferiemento che deve rimanere fisso del rettangolo 
+      Dim frFixed As Frame3d = Nothing
+      ' lunghezza del lato da modificare
+      Dim MaxLen As Double = 0
+      Dim MinLen As Double = 0
+      ' recupero info sul rettangolo selezionato
+      Dim vtDir As Vector3d = GetRettangleInfoScale(frFixed, MaxLen, MinLen)
+      If vtDir.Equals(Vector3d.NULL) Then
+         Return
+      End If
+
+      ' Inizio esecuzione di drag
+      m_bDragging = True
+
+      ' Ricavo il punto corrente in coordinate mondo
+      Dim ptCurr As Point3d
+      EgtUnProjectPoint(e.Location, ptCurr)
+      ' Ricavo il vettore di movimento
+      Dim vtMove As Vector3d = ptCurr - m_ptPrev
+      ' ricavo il valore efficace di allungamento (la proiezione)
+      Dim dProjection As Double = vtMove * vtDir
+      vtMove = vtDir * dProjection
+      ' recupero il valore di scalatura
+      Dim dScalefactor = dProjection / MaxLen + 1
+
+      ' Modifico dimensione figura
+      If Math.Abs(dScalefactor) > EPS_SMALL * EPS_SMALL Then
+         EgtScale(m_nIdSelectedOutLoopRettangle, frFixed, dScalefactor, 1, 1, GDB_ID.ROOT)
+         EgtScale(m_nIdSelectedFlatSurfRettangle, frFixed, dScalefactor, 1, 1, GDB_ID.ROOT)
+         Dim ptCen As Point3d
+         EgtCenterPoint(m_nIdSelectedTextRettangle, ptCen)
+         EgtModifyText(m_nIdSelectedTextRettangle, m_sTextContent & LenToString(MaxLen + dProjection, 2) & " x " & LenToString(MinLen, 2))
+         EgtMove(m_nIdSelectedTextRettangle, vtMove * 0.5, GDB_ID.ROOT)
+         If m_nIdSelectedTextTopRettangle <> GDB_ID.NULL Then
+            EgtMove(m_nIdSelectedTextTopRettangle, vtMove * 0.5, GDB_ID.ROOT)
+         End If
+      End If
+
+      ' verifico che il il lato  maggiore rimanga semore il lato maggiore
+      Dim bRettangleCorrect As Boolean = False
+      If (MaxLen + dProjection - MinLen) > EPS_SMALL Then bRettangleCorrect = True
+
+      Dim nWarn As Integer = 0
+      ResetAllMachinings(nWarn)
+      EnableReferenceRegion(False)
+      ' se la modifica genera un errore allora ripristino la figura prima della defomrazione
+      If Not EgtVerifyPart(EgtGetParent(m_nIdSelectedOutLoopRettangle), True) Or Not bRettangleCorrect Then
+         EgtScale(m_nIdSelectedOutLoopRettangle, frFixed, 1 / dScalefactor, 1, 1, GDB_ID.ROOT)
+         EgtScale(m_nIdSelectedFlatSurfRettangle, frFixed, 1 / dScalefactor, 1, 1, GDB_ID.ROOT)
+         Dim ptCen As Point3d
+         EgtCenterPoint(m_nIdSelectedTextRettangle, ptCen)
+         EgtModifyText(m_nIdSelectedTextRettangle, m_sTextContent & LenToString(MaxLen, 2) & " x " & LenToString(MinLen, 2))
+         EgtMove(m_nIdSelectedTextRettangle, -vtMove * 0.5, GDB_ID.ROOT)
+         If m_nIdSelectedTextTopRettangle <> GDB_ID.NULL Then
+            EgtMove(m_nIdSelectedTextTopRettangle, -vtMove * 0.5, GDB_ID.ROOT)
+         End If
+      End If
+
+      EgtDraw()
+      ' Aggiorno il punto precedente
+      m_ptPrev = ptCurr
+      ' Terminata esecuzione di drag
+      m_bDragging = False
+   End Sub
+
+   ' funzione chiamata da OnMyMouseUp: gestisce il reset di tutti gli indici in uso 
+   Public Sub ResetDragRettangleParam()
+      ' deseleziono l'elemento corrente
+      EgtDeselectObj(m_nIdSelectedSawRettangle)
+      EgtDeselectObj(m_nIdSelectedCurvRettangle)
+      EgtResetMark(m_nIdSelectedSawRettangle)
+      ' resetto gli indici
+      m_nIdSelectedOutLoopRettangle = GDB_ID.NULL
+      m_nIdSelectedRegionRettangle = GDB_ID.NULL
+      m_nIdSelectedSawRettangle = GDB_ID.NULL
+      m_nIdSelectedCurvRettangle = GDB_ID.NULL
+      m_nIdSelectedTextRettangle = GDB_ID.NULL
+      m_nIdSelectedTextTopRettangle = GDB_ID.NULL
+      m_nIdSelectedFlatSurfRettangle = GDB_ID.NULL
+      m_SideListRettangle = {GDB_ID.NULL, GDB_ID.NULL, GDB_ID.NULL, GDB_ID.NULL}
+      m_sTextContent = String.Empty
+      ' disattivo il drag
+      m_bDrag = False
+      ' aggiorno le lavorazioni
+      Dim nWarn As Integer = 0
+      ResetAllMachinings(nWarn)
+      EgtDraw()
+   End Sub
+
+#End Region    ' Drag Rettangolo
+
 #End Region    ' METHODS
 
+   Private m_bDragRettangle As Boolean
+   Public Property bDragRettangle As Boolean
+      Get
+         Return m_bDragRettangle
+      End Get
+      Set(value As Boolean)
+         m_bDragRettangle = value
+      End Set
+   End Property
+
+   Private m_DragRettangle_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property DragRettangle_Visibility As Visibility
+      Get
+         Return m_DragRettangle_Visibility
+      End Get
+   End Property
+
+   Public ReadOnly Property DragRettangle_Cl_Span As Integer
+      Get
+         If m_DragRettangle_Visibility = Visibility.Visible Then
+            Return 1
+         End If
+         Return 2
+      End Get
+   End Property
+
+
 #Region "COMMANDS"
 
 #Region "DrawCommand"
@@ -901,6 +1260,8 @@ Public Class NestingTabVM
    End Property
 
    Public Sub StorePart(ByVal param As Object)
+      ' creo la lista delle famiglie di pezzi presenti in parcheggio
+      GetFamilyGroupInPark()
       EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
       ' Ciclo di parcheggio dei pezzi selezionati
       Dim nId As Integer = EgtGetFirstSelectedObj()
@@ -973,13 +1334,20 @@ Public Class NestingTabVM
          If bEraseCsvParts OrElse Not EgtExistsInfo(nId, INFO_CSV_PATH) Then
             ' Se pezzo in parcheggio cancello direttamente
             If EgtIsPart(nId) Then
+               '---------------------- COUNTER PART ----------------------
+               Dim sRefGroup As String = String.Empty
+               ' recupero l'GUID del gruppo 
+               EgtGetInfo(nId, INFO_REFGROUP, sRefGroup)
+               '---------------------- COUNTER PART ----------------------
                ' Eventuale notifica al VeinMatching
                VeinMatching.OnRemovePart(nId, False)
                ' Rimuovo le lavorazioni
                EraseMachinings(nId)
                ' Cancello
                EgtErase(nId)
-            ' Altrimenti pezzo nel grezzo
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio (se sRefGroup<>"")
+               CountPartInFamily(sRefGroup)
+               ' Altrimenti pezzo nel grezzo
             ElseIf EgtGetParent(nId) = EstCalc.GetRawId() Then
                If EgtRemovePartFromRawPart(nId) Then
                   ' Eventuale notifica al VeinMatching
@@ -1169,6 +1537,17 @@ Public Class NestingTabVM
 #Region "EVENTS"
 
    Friend Sub OnMouseDownScene(sender As Object, e As Windows.Forms.MouseEventArgs)
+      ' se in modalità DragRettangle (deformazione delle componenti rettangolari)
+      If m_bDragRettangle Then
+         OnMyMouseDownSceneSelSideRettangle(sender, e)
+         ' Dati per drag (abilito il Drag)
+         m_locPrev = e.Location
+         m_bDrag = EgtUnProjectPoint(e.Location, m_ptPrev) And m_nIdSelectedCurvRettangle <> GDB_ID.NULL
+         m_bDragToStart = m_bDrag
+         m_bVerify = m_bDrag AndAlso (Keyboard.Modifiers And ModifierKeys.Shift) > 0
+         m_vtTotMove = Vector3d.NULL()
+         Return
+      End If
       ' Per default no drag
       m_bDrag = False
       ' Verifico se selezionato indicativo di pezzo
@@ -1183,13 +1562,35 @@ Public Class NestingTabVM
          If EgtIsPart(nPartId) Or bPartInTable Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nPartId, nStat)
-            ' Se già selezionato
-            If nStat = GDB_ST.SEL Then
-               ' Memorizzo Id da deselezionare
-               m_nIdToDesel = nPartId
-            Else
-               ' Memorizzo Id da selezionare
-               m_nIdToSel = nPartId
+
+            ' verifico se l'lemento selezionato è il numero di pezzi
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT Then
+               Dim NameLayer As String = String.Empty
+               EgtGetName(EgtGetParent(nId), NameLayer)
+               If NameLayer = INFO_COUNTERLY Then
+                  Dim sText As String = String.Empty
+                  If EgtTextGetContent(nId, sText) Then
+                     Dim sItems() As String = sText.Split("#")
+                     If sItems.Count > 1 Then
+                        m_nCurrNubrOfParts = 0
+                        If StringToInt(sItems(1), m_nCurrNubrOfParts) Then
+                           m_bIsCounterLy = True
+                           m_nIdToSel = nPartId
+                        End If
+                     End If
+                  End If
+               End If
+            End If
+
+            If Not m_bIsCounterLy Then
+               ' Se già selezionato o posizione oggetto incompatibile con flag posizione selezionati
+               If nStat = GDB_ST.SEL Then
+                  ' Memorizzo Id da deselezionare
+                  m_nIdToDesel = nPartId
+               Else
+                  ' Memorizzo Id da selezionare
+                  m_nIdToSel = nPartId
+               End If
             End If
             ' Drag possibile
             m_bDrag = True
@@ -1216,6 +1617,13 @@ Public Class NestingTabVM
          End If
          m_bDragToStart = False
       End If
+
+      ' se devo muovere un lato del rettangolo
+      If m_bDragRettangle Then
+         OnMyMouseMoveSawRettangle(sender, e)
+         Return
+      End If
+
       ' Determino cosa muovere
       Dim nMoveId = If(m_nIdToSel <> GDB_ID.NULL, m_nIdToSel, GDB_ID.SEL)
       ' Verifico se in tavola o in parcheggio
@@ -1235,7 +1643,20 @@ Public Class NestingTabVM
          Dim b3Ins As new BBox3d
          EgtGetBBoxGlob( EgtGetFirstNameInGroup( nTestId, NAME_REGION), BBFLAG, b3Ins)
          Dim vtDiff As new Vector3d( b3Curr.Min().x - b3Ins.Min().x, b3Curr.Min().y - b3Ins.Min().y, 0)
-         EgtMove( nMoveId, vtDiff)
+         EgtMove(nMoveId, vtDiff)
+
+         '---------------------- COUNTER PART ----------------------
+         ' aggiorno contatore pezzi
+         Dim sRefGroup As String = String.Empty
+         If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
+            ' spengo il layer che contiene il contatore
+            Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
+            EgtSetStatus(nCounterLayer, GDB_ST.OFF)
+            ' aggiorno il layer che indica il numero di pezzi in parcheggio
+            CountPartInFamily(sRefGroup)
+         End If
+         '---------------------- COUNTER PART ----------------------
+
          ' Gestione VeinMatching
          VeinMatching.OnInsertPartInRaw( nMoveId)
          ' Imposto stato
@@ -1304,6 +1725,11 @@ Public Class NestingTabVM
    End Sub
 
    Friend Sub OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      If m_bDragRettangle Then
+         ' deseleziono gli oggeti, resetto le variabili usate, aggiorno il disegno
+         ResetDragRettangleParam()
+         Return
+      End If
       ' Se eseguito drag
       If Not m_bDragToStart Then
          ' Se movimento con sola verifica finale
@@ -1335,13 +1761,35 @@ Public Class NestingTabVM
                      VeinMatching.OnMovePartInRaw(nMoveId)
                   End If
                End If
+               '---------------------- COUNTER PART ----------------------
+               Dim sRefGroup As String = String.Empty
+               If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
+                  ' accendo il layer che contiene il contatore (spento in fase di Drag)
+                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
+                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
+                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
+                  CountPartInFamily(sRefGroup)
+               End If
+               '---------------------- COUNTER PART ----------------------
             End If
             m_bFromParking = False
-         ' altrimenti caso con verifica durante il movimento
+            ' altrimenti caso con verifica durante il movimento
          Else
             ' Basta reset alla fine
          End If
-      ' Se selezione da eseguire
+
+         ' se è stato selezionato il layer del contatore mostro la finsetra
+      ElseIf m_bIsCounterLy Then
+         ' devo csotruire la finestra per la selezione del numero di pezzi da muovere
+         ' apro una finestra di dialogo per chiedere se inserire tutti i pezzi della famiglia
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(m_nIdToSel, INFO_REFGROUP, sRefGroup)
+         Dim DataContextSlectWD As New MultiSelectionVM(m_nCurrNubrOfParts, sRefGroup)
+         Dim SelectWD As MultiSelectionV = New MultiSelectionV(Application.Current.MainWindow, DataContextSlectWD)
+         DataContextSlectWD.SetMultiSelectionV(SelectWD)
+         m_bIsCounterLy = False
+
+         ' Se selezione da eseguire
       ElseIf m_nIdToSel <> GDB_ID.NULL Then
          ' Determino se pezzo in tavola o in parcheggio
          Dim bPartInTable As Boolean = (EgtGetParent(m_nIdToSel) = GetRawId())
@@ -1358,7 +1806,7 @@ Public Class NestingTabVM
          VeinMatching.OnSelectPart(m_nIdToSel)
          ' Set flag posizione selezionati
          m_nPartPos = If(bPartInTable, PART_POS.IN_TABLE, PART_POS.OUT_TABLE)
-      ' Se deselezione da eseguire
+         ' Se deselezione da eseguire
       ElseIf m_nIdToDesel <> GDB_ID.NULL Then
          EgtDeselectObj(m_nIdToDesel)
          ' Eventuale aggiornamento VeinMatching
@@ -1414,3 +1862,48 @@ Public Class NestingTabVM
 #End Region    ' EVENTS
 
 End Class
+
+Class FamilyPart
+
+   Private PtMinStoraged As Point3d
+   Private PtMaxStoraged As Point3d
+
+   Private m_nHText As Integer = 40
+   Public ReadOnly Property nHText As Double
+      Get
+         Return m_nHText
+      End Get
+   End Property
+
+   Private m_sRefGuid As String = String.Empty
+   Public ReadOnly Property sRefGuid As String
+      Get
+         Return m_sRefGuid
+      End Get
+   End Property
+
+   Private m_nIdPart As Integer = -1
+   Public ReadOnly Property nIdPart As Integer
+      Get
+         Return m_nIdPart
+      End Get
+   End Property
+
+   Private m_IdCounterText As Integer
+   Public ReadOnly Property IdCounterText As Integer
+      Get
+         Return m_IdCounterText
+      End Get
+   End Property
+
+   Public Function PtStorage() As Point3d
+      EgtGetBBoxGlob(m_nIdPart, GDB_BB.STANDARD, PtMinStoraged, PtMaxStoraged)
+      Return PtMinStoraged
+   End Function
+
+   Sub New(Guid As String, IdPart As Integer)
+      m_sRefGuid = Guid
+      m_nIdPart = IdPart
+   End Sub
+
+End Class

OptionPanel/RawPartTab/RawPartTabVM.vb

@@ -1678,8 +1678,11 @@ Public Class RawPartTabVM
    End Sub
 
    Private Sub AdjustRawPartOnExit()
-      ' Se non c'è il grezzo, esco
-      If EstCalc.GetRawId() = GDB_ID.NULL Then Return
+      ' Se non c'è il grezzo, esco dopo aver nascosto eventuale foto
+      If EstCalc.GetRawId() = GDB_ID.NULL Then
+         ShowPhoto(False)
+         Return
+      End If
       ' Disabilito impostazione modificato
       Dim bOldEnMod = EgtGetEnableModified()
       If bOldEnMod Then EgtDisableModified()