Gestione setting lavorazioni correnti di Office

CurrMachWindow/CurrMachWindowVM.vb

@@ -29,9 +29,17 @@ Public Class CurrMachWindowVM
             m_SelCurrSawing = value
          End If
          CurrentMachine.sCurrSawing = m_SelCurrSawing
+         ' salvo la lvorazione corrente
+         WritePrivateProfileString(S_MACH_MACH, K_CURRSAWING_OFFICE, m_SelCurrSawing, sMachIniFile)
       End Set
    End Property
 
+   Public Sub SetCurrSawing(sCurrOfficeSawing As String)
+      m_SelCurrSawing = sCurrOfficeSawing
+      CurrentMachine.sCurrSawing = m_SelCurrSawing
+      NotifyPropertyChanged("SelCurrSawing")
+   End Sub
+
    Public ReadOnly Property CurrSawing_Visibility As Visibility
       Get
          If EgtGetHeadId("H1") = GDB_ID.NULL Then
@@ -149,10 +157,18 @@ Public Class CurrMachWindowVM
          If value <> m_SelCurrDrilling Then
             m_SelCurrDrilling = value
             CurrentMachine.sCurrDrilling = m_SelCurrDrilling
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRDRILLING_OFFICE, m_SelCurrDrilling, sMachIniFile)
          End If
       End Set
    End Property
 
+   Public Sub SetCurrDrilling(sCurrOfficeDrilling As String)
+      m_SelCurrDrilling = sCurrOfficeDrilling
+      CurrentMachine.sCurrDrilling = m_SelCurrDrilling
+      NotifyPropertyChanged("SelCurrDrilling")
+   End Sub
+
    Private m_CurrDrilling_Visibility As Visibility
    Public Property CurrDrilling_Visibility As Visibility
       Get
@@ -187,10 +203,18 @@ Public Class CurrMachWindowVM
          If value <> m_SelCurrMilling Then
             m_SelCurrMilling = value
             CurrentMachine.sCurrMilling = m_SelCurrMilling
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRMILLING_OFFICE, m_SelCurrMilling, sMachIniFile)
          End If
       End Set
    End Property
 
+   Public Sub SetCurrMilling(sCurrOfficeMilling As String)
+      m_SelCurrMilling = sCurrOfficeMilling
+      CurrentMachine.sCurrMilling = m_SelCurrMilling
+      NotifyPropertyChanged("SelCurrMilling")
+   End Sub
+
    Private m_CurrMilling_Visibility As Visibility
    Public Property CurrMilling_Visibility As Visibility
       Get
@@ -225,10 +249,18 @@ Public Class CurrMachWindowVM
          If value <> m_SelCurrPocketing Then
             m_SelCurrPocketing = value
             CurrentMachine.sCurrPocketing = m_SelCurrPocketing
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRPOCKETING_OFFICE, m_SelCurrPocketing, sMachIniFile)
          End If
       End Set
    End Property
 
+   Public Sub SetCurrPocketing(sCurrOfficePocketing As String)
+      m_SelCurrPocketing = sCurrOfficePocketing
+      CurrentMachine.sCurrPocketing = m_SelCurrPocketing
+      NotifyPropertyChanged("SelCurrPocketing")
+   End Sub
+
    Private m_CurrPocketing_Visibility As Visibility
    Public Property CurrPocketing_Visibility As Visibility
       Get
@@ -263,10 +295,18 @@ Public Class CurrMachWindowVM
          If value <> m_SelCurrWaterjetting Then
             m_SelCurrWaterjetting = value
             CurrentMachine.sCurrWaterJetting = m_SelCurrWaterjetting
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRWATERJETTING_OFFICE, m_SelCurrWaterjetting, sMachIniFile)
          End If
       End Set
    End Property
 
+   Public Sub SetCurrWaterjetting(sCurrOfficeWaterjetting As String)
+      m_SelCurrWaterjetting = sCurrOfficeWaterjetting
+      CurrentMachine.sCurrWaterJetting = m_SelCurrWaterjetting
+      NotifyPropertyChanged("SelCurrWaterjetting")
+   End Sub
+
    Private m_CurrWaterjettingQualityList As New List(Of String)
    Public Property CurrWaterjettingQualityList As List(Of String)
       Get
@@ -286,10 +326,18 @@ Public Class CurrMachWindowVM
          If value <> m_SelCurrWaterjettingQuality Then
             m_SelCurrWaterjettingQuality = value
             CurrentMachine.sCurrWaterJettingQuality = m_SelCurrWaterjettingQuality
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRWATERJETTINGQUALITY_OFFICE, m_SelCurrWaterjettingQuality, sMachIniFile)
          End If
       End Set
    End Property
 
+   Public Sub SetCurrWaterjettingQuality(sCurrOfficeWaterjettingQuality As String)
+      m_SelCurrWaterjettingQuality = sCurrOfficeWaterjettingQuality
+      CurrentMachine.sCurrWaterJettingQuality = m_SelCurrWaterjettingQuality
+      NotifyPropertyChanged("SelCurrWaterjetting")
+   End Sub
+
    Private m_CurrWaterjetting_Visibility As Visibility = Visibility.Collapsed
    Public Property CurrWaterjetting_Visibility As Visibility
       Get
@@ -472,11 +520,13 @@ Public Class CurrMachWindowVM
 
       If m_CurrSawingList.Count > 0 Then
          If CurrentMachine.sCurrSawing <> String.Empty Then
-            SelCurrSawing = CurrentMachine.sCurrSawing
+            SetCurrSawing(CurrentMachine.sCurrSawing)
          Else
             Dim sCurrSawing As String = ""
-            GetPrivateProfileString(S_MACH_MACH, K_CURRSAWING, Nothing, sCurrSawing, sMachIniFile)
-            SelCurrSawing = sCurrSawing
+            ' GetPrivateProfileString(S_MACH_MACH, K_CURRSAWING, Nothing, sCurrSawing, sMachIniFile)
+            GetPrivateProfileString(S_MACH_MACH, K_CURRSAWING_OFFICE, Nothing, sCurrSawing, sMachIniFile)
+            'SelCurrSawing = sCurrSawing
+            SetCurrSawing(sCurrSawing)
          End If
       Else
          CurrentMachine.sCurrSawing = String.Empty
@@ -486,7 +536,11 @@ Public Class CurrMachWindowVM
       If CurrentMachine.bDrilling And m_CurrDrillingList.Count > 1 Then
          CurrDrilling_Visibility = Visibility.Visible
          If CurrentMachine.sCurrDrilling <> String.Empty Then
-            SelCurrDrilling = CurrentMachine.sCurrDrilling
+            SetCurrDrilling(CurrentMachine.sCurrDrilling)
+         Else
+            Dim sCurrMachining As String = ""
+            GetPrivateProfileString(S_MACH_MACH, K_CURRDRILLING_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+            SetCurrDrilling(sCurrMachining)
          End If
       Else
          CurrDrilling_Visibility = Visibility.Collapsed
@@ -495,7 +549,11 @@ Public Class CurrMachWindowVM
       If CurrentMachine.bMilling And m_CurrMillingList.Count > 1 Then
          CurrMilling_Visibility = Visibility.Visible
          If CurrentMachine.sCurrMilling <> String.Empty Then
-            SelCurrMilling = CurrentMachine.sCurrMilling
+            SetCurrMilling(CurrentMachine.sCurrMilling)
+         Else
+            Dim sCurrMachining As String = ""
+            GetPrivateProfileString(S_MACH_MACH, K_CURRMILLING_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+            SetCurrMilling(sCurrMachining)
          End If
       Else
          CurrMilling_Visibility = Visibility.Collapsed
@@ -504,7 +562,11 @@ Public Class CurrMachWindowVM
       If CurrentMachine.bPocketing And CurrPocketingList.Count > 1 Then
          CurrPocketing_Visibility = Visibility.Visible
          If CurrentMachine.sCurrPocketing <> String.Empty Then
-            SelCurrPocketing = CurrentMachine.sCurrPocketing
+            SetCurrPocketing(CurrentMachine.sCurrPocketing)
+         Else
+            Dim sCurrMachining As String = ""
+            GetPrivateProfileString(S_MACH_MACH, K_CURRPOCKETING_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+            SetCurrPocketing(sCurrMachining)
          End If
       Else
          CurrPocketing_Visibility = Visibility.Collapsed
@@ -515,10 +577,18 @@ Public Class CurrMachWindowVM
          ' se DB WaterJet abilitato avrò anche la CmBx della Quality solo la CmBx del Waterjetting corrente
          If CurrentMachine.bFromDBWaterJet Then
             If CurrentMachine.sCurrWaterJetting <> String.Empty Then
-               SelCurrWaterjetting = CurrentMachine.sCurrWaterJetting
+               SetCurrWaterjetting(CurrentMachine.sCurrWaterJetting)
+            Else
+               Dim sCurrMachining As String = ""
+               GetPrivateProfileString(S_MACH_MACH, K_CURRWATERJETTING_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+               SetCurrWaterjetting(sCurrMachining)
             End If
             If CurrentMachine.sCurrWaterJettingQuality <> String.Empty Then
-               SelCurrWaterjettingQuality = CurrentMachine.sCurrWaterJettingQuality
+               SetCurrWaterjettingQuality(CurrentMachine.sCurrWaterJettingQuality)
+            Else
+               Dim sCurrMachining As String = ""
+               GetPrivateProfileString(S_MACH_MACH, K_CURRWATERJETTINGQUALITY_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+               SetCurrWaterjettingQuality(sCurrMachining)
             End If
             CurrWaterjettingQuality_Visibility = Visibility.Visible
          Else

EgtStoneLib/ConstMachIni.vb

@@ -247,9 +247,13 @@
    Public Const K_CURRDRIPDRILL As String = "CurrDripDrill"
    Public Const K_CURRWATERJET As String = "CurrWaterJet"
    Public Const K_CURRSAWING As String = "CurrSawing"
+   Public Const K_CURRSAWING_OFFICE As String = "CurrOfficeSawing"
    Public Const K_CURRDRILLING As String = "CurrDrilling"
+   Public Const K_CURRDRILLING_OFFICE As String = "CurrOfficeDrilling"
    Public Const K_CURRMILLING As String = "CurrMilling"
+   Public Const K_CURRMILLING_OFFICE As String = "CurrOfficeMilling"
    Public Const K_CURRPOCKETING As String = "CurrPocketing"
+   Public Const K_CURRPOCKETING_OFFICE As String = "CurrOfficePocketing"
    Public Const K_CURRSAWROUGHING As String = "CurrSawRoughing"
    Public Const K_CURRSAWFINISHING As String = "CurrSawFinishing"
    Public Const K_CURRSAWSIDEFINISHING As String = "CurrSawSideFinishing"
@@ -257,7 +261,9 @@
    Public Const K_CURRDRIPSAWING As String = "CurrDripSawing"
    Public Const K_CURRDRIPDRILLING As String = "CurrDripDrilling"
    Public Const K_CURRWATERJETTING As String = "CurrWaterJetting"
+   Public Const K_CURRWATERJETTING_OFFICE As String = "CurrOfficeWaterJetting"
    Public Const K_CURRWATERJETTINGQUALITY As String = "CurrWaterJettingQuality"
+   Public Const K_CURRWATERJETTINGQUALITY_OFFICE As String = "CurrWaterJettingQuality"
 
    Public Const S_MATERIALS As String = "Materials"
    Public Const K_CURRMATERIAL As String = "CurrMaterial"

EgtStoneLib/VacuumCups.vb

@@ -539,14 +539,25 @@ Module VacuumCups
 
    ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
    Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
-      Dim dX, dY, dZ As Double
-      Dim nStat As Integer
+      ' Posizione Home dell'asse rotante
       Dim dCHome As Double
       EgtGetAxisHomePos("C", dCHome)
-      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      ' Corse dell'asse
+      Dim dCMin As Double
+      EgtGetAxisMin("C", dCMin)
+      Dim dCMax As Double
+      EgtGetAxisMax("C", dCMax)
+      ' Porto l'angolo nel range
+      Dim dRotAngMachDeg As Double = dRotAngDeg + dCHome
+      AdjustAngleInRange(dRotAngMachDeg, dCMin, dCMax)
+      ' Imposto la ventosa come fosse un utensile
       EgtSetCalcTool("", "H4", 1)
-      EgtGetCalcPositions(ptRef, dRotAngDeg + dCHome, 0, nStat, dX, dY, dZ)
-      EgtVerifyOutstroke(dX, dY, dZ, dRotAngDeg + dCHome, 0, nStat)
+      ' Calcolo gli assi macchina
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      EgtGetCalcPositions(ptRef, dRotAngMachDeg, 0, nStat, dX, dY, dZ)
+      ' Verifico le corse
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngMachDeg, 0, nStat)
       Return nStat
    End Function
 

EgtStoneLib/VeinMatchingWindow.xaml

@@ -20,6 +20,7 @@
                        Margin="0,5,0,0"
                        Content="Verify"/>
          <ToggleButton Name="MagneticBtn" Height="40" Width="80"
+                       Visibility="Collapsed"
                        Margin="0,5,0,0"
                        Content="Magnetic"/>
          <Button Name="ExportBtn" Height="40" Width="80"

InstrumentPanel/PrintPanelVM.vb

@@ -7,7 +7,8 @@ Public Class PrintPanelVM
 
    Public ReadOnly Property PrintToolTip As String
       Get
-         Return "Print shading" & vbCrLf & "Print hidden line (Shift)"
+         ' "Print shading" & vbCrLf & "Print hidden line (Shift)"
+         Return "Print"
       End Get
    End Property
 
@@ -24,10 +25,22 @@ Public Class PrintPanelVM
 
    Public Sub Print(ByVal param As Object)
       Dim SM_Select As SM = SM.SHADING
-      If (Keyboard.Modifiers And ModifierKeys.Shift) > 0 Then
+
+      ' Imposto la stampa HiddenLine (non è gestita la stampa WireFrame)
+      'If (Keyboard.Modifiers And ModifierKeys.Shift) > 0 Then
+      '   SM_Select = SM.HIDDENLINE
+      '   EgtSetLineAttribs(3)
+      'End If
+
+      ' Gestione stampa in funzione del della visualizzazione corrente
+      If OmagOFFICEMap.refShowPanelVM.WireframeIsChecked Then
+         SM_Select = SM.WIREFRAME
+         EgtSetLineAttribs(3)
+      ElseIf OmagOFFICEMap.refShowPanelVM.HiddenLineIsChecked Then
          SM_Select = SM.HIDDENLINE
          EgtSetLineAttribs(3)
       End If
+
       Dim printDlg As New PrintDialog
       Dim sPath = OmagOFFICEMap.refMainWindowVM.MainWindowM.sTempDir & "\Image.png"
       If printDlg.ShowDialog() Then
@@ -35,10 +48,9 @@ Public Class PrintPanelVM
          Dim dW As Double = printDlg.PrintableAreaWidth
          Dim dH As Double = printDlg.PrintableAreaHeight
          Try
-            ' Creo l'immagine da allegare
-            ' EgtZoom(ZM.ALL, True)
-            ' Prendo l'immagine per la stampa
+            ' Prendo l'immagine corrente per la stampa
             Dim colWhite As New Color3d(255, 255, 255)
+            ' Recupero le dimensioni correnti della pagina di disegno
             Dim nImgW As Integer = GetWidthDimProjectV()
             Dim nImgH As Integer = GetHeightDimProjectV()
             If Not EgtGetImage(SM_Select, colWhite, colWhite, nImgW, nImgH, sPath) Then
@@ -63,12 +75,7 @@ Public Class PrintPanelVM
             Dim tmpImg As New Image
             tmpImg.BeginInit()
             tmpImg.Source = bitImage
-            'tmpImg.Margin = New Thickness(-100)
             tmpImg.Stretch = Stretch.Uniform
-            ' ruoto a seconda dell'aspetto della pagina
-            'If (dH > dW And nImgH < nImgW) Or (dH < dW And nImgH > nImgW) Then
-            '   tmpImg.LayoutTransform = New RotateTransform(-90)
-            'End If
             tmpImg.EndInit()
             ' eseguo la stampa
             printDlg.PrintVisual(tmpImg, "Parts Layout")

MyMachGroupPanel/MyMachGroupPanelVM.vb

@@ -189,6 +189,10 @@ Public Class MyMachGroupPanelVM
       End If
       ' Verifico che gli utensili delle lavorazioni correnti siano attrezzati (necessario perchè potrei aver cambiato gli utensili delle lavorazioni)
       ' e che le lavorazioni correnti siano compatibili con materiale e spessore
+
+      ' Inizializzo l'elenco delle lavorazioni correnti
+      Dim CurrMachining As New CurrMachWindowVM
+
       ' Lama
       Dim bOkCurrSawing As Boolean = True
       Dim bOkCurrWaterjetting As Boolean = True
@@ -229,12 +233,13 @@ Public Class MyMachGroupPanelVM
       Else
          bOkCurrWaterjetting = False
       End If
-
+      ' Imposto il colore del pulsante SetUp 
       If Not bOkSetUp Then
          OmagOFFICEMap.refMachinePanelVM.SetUp_Background = Brushes.Red
       Else
          OmagOFFICEMap.refMachinePanelVM.SetUp_Background = DirectCast(New BrushConverter().ConvertFrom("#FFDDDDDD"), SolidColorBrush)
       End If
+      ' Imposto il colore di sfondo del pulsante SettingMachinig
       If Not bOkMatThick Or Not bOkCurrSawing Then
          If Not bOkMatThick Or Not bOkCurrWaterjetting Then
             OmagOFFICEMap.refOptionPanelVM.RawPart_Background = Brushes.Red

OptionPanel/NestingTab/NestingTabVM.vb

@@ -2428,6 +2428,7 @@ Public Class NestingTabVM
          VeinMatching.OnDeselectPart(m_nIdToDesel)
       End If
       ' Reset
+      GetFamilyGroupInPark()
       m_bDrag = False
       m_nIdToSel = GDB_ID.NULL
       m_nIdToDesel = GDB_ID.NULL

OptionPanel/SimulTab/SimulTabVM.vb

@@ -137,10 +137,10 @@ Public Class SimulTabVM
          MyEstim.Estimation_IsEnabled = False
       End If
       ' Impostazioni box stime
-      NotifyPropertyChanged("Time")
-      NotifyPropertyChanged("CutLen")
-      NotifyPropertyChanged("NetArea")
-      NotifyPropertyChanged("Usage")
+      MyEstim.NotifyPropertyChanged("Time")
+      MyEstim.NotifyPropertyChanged("CutLen")
+      MyEstim.NotifyPropertyChanged("NetArea")
+      MyEstim.NotifyPropertyChanged("Usage")
       ' Nascondo eventuali pezzi in parcheggio
       HideParkedParts()
       ' Nascondo eventuale contorno da foto