Verifica interferenze tra grezzi in fase di split

- controlli vari.

Constants/ConstIni.vb

@@ -121,7 +121,7 @@ Module ConstIni
    Public Const K_TEXTCOLOR As String = "TextColor"
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
-   Public Const K_DRAGRETTANGLE As String = "DragRectangle"
+   Public Const K_DRAGRECTANGLE As String = "DragRectangle"
 
    Public Const S_SPLIT As String = "Split"
    Public Const K_MOVE_LEV As String = "MoveLevel"

EgtStoneLib/ConstMach.vb

@@ -35,6 +35,8 @@ Module ConstMach
    Public Const KEY_VACLAY_PREFROT As String = "PreferredRot"
    Public Const KEY_VACLAY_PREFVROTXMINUS As String = "PrefVertRotXMinus"
    Public Const KEY_VACLAY_PREFVROTXPLUS As String = "PrefVertRotXPlus"
+   Public Const KEY_VACLAY_PREFVROTYMINUS As String = "PrefVertRotYMinus"
+   Public Const KEY_VACLAY_PREFVROTYPLUS As String = "PrefVertRotYPlus"
    ' Info in gruppo layout per direzione di riferimento ventose per tagli da sotto
    Public Const KEY_VACLAY_DRIPREFDIR As String = "DripRefDir"
    ' Info in asse rotante ventosa per step discreti

EgtStoneLib/ConstMachIni.vb

@@ -198,6 +198,10 @@
    Public Const S_MACH_RAWMOVE As String = "RawMove"
    Public Const K_MACH_RM_ROTATE As String = "Rotate"
    Public Const K_MACH_RM_FINALMOVE As String = "FinalMove"
+   Public Const K_MACH_WEIGHT_SINGLEPLUGGER As String = "MaxWeightSinglePlugger"
+   Public Const K_MACH_WEIGHT_DOUBLEPLUGGER As String = "MaxWeightDoublePlugger"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEY As String = "RotateVacuumForExtraStrokeY"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEX As String = "RotateVacuumForExtraStrokeX"
 
    Public Const S_MACH_REG As String = "Reg"
    Public Const K_MACH_MAX_ROT_ANG As String = "MaxRotAng"
@@ -260,6 +264,7 @@
    Public Const K_CURROFFICEMATERIAL As String = "CurrOfficeMaterial"
    Public Const K_MATERIAL As String = "Material"
    Public Const K_FROMDBWATERJET As String = "FromDBWaterJet"
+   Public Const K_AVERAGEDENSITY As String = "AverageDensity"
 
    Public Const S_SETUP As String = "SetUp"
    Public Const K_DEFAULT As String = "Default"

EgtStoneLib/VacuumCups.vb

@@ -10,7 +10,22 @@ Module VacuumCups
    Private m_dPreferredRot As Double = 0
    Private m_dPrefVertRotXMinus As Double = 0
    Private m_dPrefVertRotXPlus As Double = 0
+   Private m_dPrefVertRotYMinus As Double = 0
+   Private m_dPrefVertRotYPlus As Double = 0
    Private m_dDripRefAng As Double = 0
+   ' dati carico massimo manipolatore
+   Private m_RawDensity As Double = 2500
+   Private m_RawWeight As Double = 0
+   Private m_MaxWeightSinglePlugger As Double = 250
+   Private m_MaxWeightDoublePlugger As Double = 750
+   Public bOverWeight As Boolean = False
+   ' dati per rotazione ventose vicono al fine corsa Y e X
+   Private bRotateVacuumNearExtraStrokeY As Boolean = False
+   Private bRotateVacuumNearExtraStrokeX As Boolean = False
+   ' dati stroke
+   Public bExtraStroke As Boolean = False
+   Public ptStartPointLift As Point3d
+   Public dDegRotStartAng As Double
 
    ' Nome del gruppo temporaneo per le ventose
    Private Const VACTMP_GRP As String = "VacTmp"
@@ -50,6 +65,20 @@ Module VacuumCups
       Return m_nVacType
    End Function
 
+   Friend Sub GetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
+      m_RawDensity = Density
+      m_MaxWeightSinglePlugger = MaxSingle
+      m_MaxWeightDoublePlugger = MaxDouble
+   End Sub
+
+   Friend Sub GetRotationForExtraStrokeY(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeY = Rotate
+   End Sub
+
+   Friend Sub GetRotationForExtraStrokeX(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeX = Rotate
+   End Sub
+
    Friend Function GetVacuumId() As Integer
       Return m_nVacId
    End Function
@@ -66,6 +95,8 @@ Module VacuumCups
       ' Identificativo riferimento della testa nella macchina
       Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT)
       If nT1Id = GDB_ID.NULL Then Return False
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", "H4", 1)
       ' Creo gruppo temporaneo in cui copiarli
       m_nTempId = EgtCreateGroup(GDB_ID.ROOT)
       If m_nTempId = GDB_ID.NULL Then Return False
@@ -79,6 +110,8 @@ Module VacuumCups
       ' Angoli di rotazione preferiti per ventosa in verticale (lungo Y) a sinistra e a destra del centro tavola
       EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
       EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYMINUS, m_dPrefVertRotYMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYPLUS, m_dPrefVertRotYPlus)
       ' Direzione di riferimento per tagli Drip
       EgtGetInfo( m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
       ' Nascondo il gruppo ma rendo visibili le curve di contorno delle ventose
@@ -165,6 +198,18 @@ Module VacuumCups
       EgtGetBBoxGlob(nRKerfId, GDB_BB.STANDARD, b3Kerf)
       Dim ptKerfCen As Point3d
       EgtCentroid(nRKerfId, GDB_ID.ROOT, ptKerfCen)
+
+      '-------------------- INIZIO CALCOLO PESO --------------------
+      ' recupero l'area del grezzo da muovere
+      Dim RawArea As Double = 0
+      ' superficie del grezzo senza considerare eventuali fori
+      EgtSurfFrGrossArea(nRKerfId, RawArea)
+      ' volume calcolato in mmc
+      Dim RawVolume As Double = RawArea * b3Raw.DimZ()
+      ' peso calolato in kg
+      m_RawWeight = RawVolume * m_RawDensity / Math.Pow(10, 9)
+      '-------------------- FINE CALCOLO PESO --------------------
+
       ' Eseguo ricerca
       If FindVacuumCupsOnRaw(nRawId, ptRawCen, b3Kerf, ptKerfCen, nKerfId, nRKerfId, rmData) Then
          Return True
@@ -266,6 +311,7 @@ Module VacuumCups
          Dim sCups() As String = Nothing
          Dim sCups2() As String = Nothing
          If Not GetVacuumCupSelection(nI, sCups, sCups2) Then Return False
+         bExtraStroke = False
          ' Determino validità soluzioni della configurazione
          Dim vtMove As New Vector3d
          Dim ptRotCen As New Point3d
@@ -368,6 +414,23 @@ Module VacuumCups
       If b3Vac.IsEmpty() Then Return INFINITO
       ' Se box maggiore di quello del pezzo, scarto soluzione
       If b3Vac.Radius() > b3Raw.Radius() Then Return INFINITO
+      '-------------------- INIZIO VERIFICA PESO --------------------
+      bOverWeight = False
+      Select Case GetPluggerFromCameras(sCups)
+         Case 2
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightDoublePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+         Case 1
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightSinglePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+      End Select
+      '-------------------- FINE VERIFICA PESO --------------------
       ' Recupero l'area della tavola
       Dim b3Tab As New BBox3d
       EgtGetTableArea(1, b3Tab)
@@ -383,12 +446,19 @@ Module VacuumCups
          dRotAngDeg = dAngOrizzDeg
          If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
          Dim dPreferredRot As Double = m_dPreferredRot
-         If Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45 Then
+         If bRotateVacuumNearExtraStrokeX And (Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45) Then
             If frMinRect.Orig().x < b3Tab.Center().x Then
                dPreferredRot = m_dPrefVertRotXMinus
             Else
                dPreferredRot = m_dPrefVertRotXPlus
             End If
+         ElseIf bRotateVacuumNearExtraStrokeY And (Math.Abs(dRotAngDeg - 90) > 45 Or Math.Abs(dRotAngDeg - 270) > 45) Then
+            ' se l'orientemanto è orizzontale e la macchina è stata abilitata
+            If frMinRect.Orig().y < b3Tab.Center().y Then
+               dPreferredRot = m_dPrefVertRotYPlus
+            Else
+               dPreferredRot = m_dPrefVertRotYMinus
+            End If
          End If
          Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
          While dRotAngDeg - dPreferredRot >= dAngDelta / 2
@@ -446,11 +516,53 @@ Module VacuumCups
       ' Applico movimento e rotazione al punto
       ptRef.Move(vtMove)
       ptRef.Rotate(ptRotCen, Vector3d.Z_AX(), dRotAngDeg)
+      ' -------------- INIZIO verifica di essere nel limite delle corse macchina --------------
+      If VerifyOutOfStrokes(ptRef, dRotAngDeg) <> 0 Then
+         bExtraStroke = True
+         Return INFINITO
+      End If
+      ' se la posizione è accettbaile allora salvo i dati
+      ptStartPointLift = ptRef
+      dDegRotStartAng = dRotAngDeg
+      ' -------------- FINE verifica di essere nel limite delle corse macchina --------------
       ' Ne calcolo la distanza dal centro della tavola
       Dim dDist As Double = Point3d.DistXY(ptRef, b3Tab.Center())
       Return dDist
    End Function
 
+   ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", "H4", 1)
+      EgtGetCalcPositions(ptRef, dRotAngDeg + dCHome, 0, nStat, dX, dY, dZ)
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngDeg + dCHome, 0, nStat)
+      Return nStat
+   End Function
+
+   ' dall'informazione di extra corsa recupera il valore indicato
+   Public Function GetExtraStrokeValue(sInfo As String) As Double
+      Dim dExtraStroke As Double = 0
+      Dim sItems As String() = sInfo.Split("="c)
+      If sItems.Count = 2 Then
+         Dim nStartIndex As Integer = 0
+         For Each ItemChar As Char In sItems(1)
+            If ItemChar = "("c Then
+               Exit For
+            End If
+            nStartIndex += 1
+         Next
+         If nStartIndex > 0 Then
+            Dim sValue As String = sItems(1).Remove(nStartIndex, sItems(1).Count - nStartIndex)
+            StringToLen(sValue, dExtraStroke)
+         End If
+      End If
+      Return dExtraStroke
+   End Function
+
    Private Function TestVacuumCups(nCups() As Integer, nRawRegId As Integer,
                                    vtMove As Vector3d, ptRotCen As Point3d, dRotAngDeg As Double) As Boolean
       ' Eseguo verifica delle ventose rispetto al grezzo
@@ -471,6 +583,27 @@ Module VacuumCups
       Return bVacOk
    End Function
 
+   Private Function GetPluggerFromCameras(sCups() As String) As Integer
+      Dim nCountPlunger As Integer = 1
+      Dim bPlugger1 As Boolean = False
+      Dim bPlugger2 As Boolean = False
+      For Each Camera As String In sCups
+         If (Camera.Contains("1") Or Camera.Contains("2") Or Camera.Contains("3")) Then
+            bPlugger1 = True
+         Else
+            bPlugger2 = True
+         End If
+      Next
+      ' verifico quali sono le camere attive
+      If bPlugger1 And bPlugger2 Then
+         nCountPlunger = 2
+      ElseIf Not bPlugger1 And Not bPlugger2 Then
+         nCountPlunger = 0
+      End If
+      ' restituisco il numero di Plugger in uso
+      Return nCountPlunger
+   End Function
+
    Friend Function SaveOneMoveInfo(nId As Integer, rmData As RawMoveData) As Boolean
       ' Assegno le informazioni
       EgtSetInfo(nId, "Id", rmData.m_nId)

EgtStoneLib/VeinMatchingWindow.xaml.vb

@@ -984,7 +984,8 @@ Friend Module VeinMatching
       ' Esporto il file come immagine
       EgtSetCurrentContext(m_nVeinCtx)
       Dim bOk As Boolean = (EgtGetFileType(sFilePath) = FT.IMG)
-      bOk = bOk AndAlso EgtGetImage(EgtGetShowMode(), New Color3d(255, 255, 255), New Color3d(255, 255, 255),
+      bOk = bOk AndAlso EgtGetImage(DirectCast( EgtGetShowMode(), EgtInterface.SM),
+                                    New Color3d(255, 255, 255), New Color3d(255, 255, 255),
                                     m_nImgWidth, m_nImgHeight, sFilePath)
       ' Ripristino il contesto originale
       EgtSetCurrentContext(nMainCtx)

MainWindow/MainWindowM.vb

@@ -195,8 +195,8 @@ Public Class MainWindowM
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace( sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2402, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2402, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2405, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2405, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.OFFICE_BASE)
       ' Inizializzazione generale di EgtInterface

My Project/AssemblyInfo.vb

@@ -69,6 +69,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.2.3")>
-<Assembly: AssemblyFileVersion("2.4.2.3")>
+<Assembly: AssemblyVersion("2.4.5.1")>
+<Assembly: AssemblyFileVersion("2.4.5.1")>
 

MyMachGroupPanel/MyMachGroupPanelVM.vb

@@ -111,7 +111,7 @@ Public Class MyMachGroupPanelVM
       Dim nTabInd As Integer = 1
       Dim nTabCnt As Integer = CamAuto.GetTableCount()
       If nTabCnt > 1 And nTabCnt <= 3 Then
-         Dim dlg As New SelectTableWindowV(Application.Current.MainWindow, New SelectTableWindowVM(nTabCnt))
+         Dim dlg As New SelectTableWindowV(Application.Current.MainWindow, New SelectTableWindowVM(DirectCast(nTabCnt, SelectTableWindowVM.TableNumOpt)))
          dlg.ShowDialog()
          nTabInd = dlg.m_SelTable
       End If

OptionPanel/MachiningTab/MachiningTabVM.vb

@@ -224,13 +224,17 @@ Public Class MachiningTabVM
    End Property
 
    Public Sub Prev(ByVal param As Object)
+      Dim bOk As Boolean = True
       ' Dichiaro solo visualizzazione
       m_bIsShow = True
       If m_MachiningMode = MachiningModeOpt.SPLIT Then
          OmagOFFICEMap.refSplitModeVM.ExitSplitRaw(False)
       Else
-         OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
+         ' verifico collisione dei pezzi in fase di scarico
+         bOk = OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
       End If
+      ' se trovata interferenza tra grezzi (dopo movimentazione) esco
+      If Not bOk Then Return
       ' Torno alla fase precedente
       EgtSetCurrPhase(EgtGetCurrPhase() - 1)
       ' Si va sempre in Split
@@ -255,19 +259,22 @@ Public Class MachiningTabVM
    End Property
 
    Public Sub NextCmd(ByVal param As Object)
+      Dim bOk As Boolean = True
       If m_MachiningMode = MachiningModeOpt.SPLIT Then
          OmagOFFICEMap.refSplitModeVM.ExitSplitRaw(False)
          MachiningMode = MachiningModeOpt.MOVERAWPART
          AutoVisibility = Visibility.Hidden
-         OmagOFFICEMap.refMoveRawModeVM.InitMoveRaw()
+         bOk = OmagOFFICEMap.refMoveRawModeVM.InitMoveRaw()
       Else
-         OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
+         ' se verificata una interferenza allora esco
+         bOk = OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
+         If Not bOk Then Return
          MachiningMode = MachiningModeOpt.SPLIT
          AutoVisibility = Visibility.Visible
          OmagOFFICEMap.refSplitModeVM.InitSplitRaw()
       End If
-      ' Aggiorno possibilità di uscire
-      ManageExit()
+      ' Se non ci sono interferenze tra i grezzi -> aggiorno possibilità di uscire
+      If bOk Then ManageExit()
    End Sub
 
 #End Region ' NextCommand

OptionPanel/MachiningTab/ModifStartEndCutWindowV.xaml

@@ -4,6 +4,7 @@
    xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
    IsMinimizable="False"
    ShowInTaskbar="False"
+   Title="{Binding Title}"
    Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
    Height="200" Width="400"
    WindowStartupLocation="CenterOwner">

OptionPanel/MachiningTab/ModifStartEndCutWindowVM.vb

@@ -3,6 +3,15 @@ Imports EgtUILib
 
 Public Class ModifStartEndCutWindowVM
 
+   Private m_Title As String = String.Empty
+   Public Property Title As String
+      Get
+         Return m_Title
+      End Get
+      Set(value As String)
+         m_Title = value
+      End Set
+   End Property
    Public ReadOnly Property ValueMsg As String
       Get
          Return EgtMsg(MSG_SPLITPAGEUC + 35)

OptionPanel/MachiningTab/ModifStartEndWjWindowV.xaml

@@ -4,6 +4,7 @@
    xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
    IsMinimizable="False"
    ShowInTaskbar="False"
+   Title="{Binding Title}"
    Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
    Height="400" Width="400"
    WindowStartupLocation="CenterOwner">

OptionPanel/MachiningTab/ModifStartEndWjWindowVM.vb

@@ -6,6 +6,15 @@ Imports EgtWPFLib5
 Public Class ModifStartEndWjWindowVM
    Inherits VMBase
 
+   Private m_Title As String = String.Empty
+   Public Property Title As String
+      Get
+         Return m_Title
+      End Get
+      Set(value As String)
+         m_Title = value
+      End Set
+   End Property
    Public ReadOnly Property ValueMsg As String
       Get
          Return EgtMsg(MSG_SPLITPAGEUC + 35)

OptionPanel/MachiningTab/MoveRawModeVM.vb

@@ -17,6 +17,7 @@ Public Class MoveRawModeVM
    Private m_bRemovedRaw As Boolean = False                 ' flag per rimozione manuale pezzi
    Private m_RawMoveDataList As New List(Of RawMoveData)    ' dati di movimento
    Private m_bRawWithCups As Boolean = False                ' flag per pezzo corrente con ventose
+   Private m_CurrRawOnVacuum As Integer = GDB_ID.NULL       ' identificativo pezzo correntemente attaccato alle ventose
 
    Private m_dMoveStep As Double
    Public Property MoveStep As String
@@ -108,6 +109,17 @@ Public Class MoveRawModeVM
 #Region "METHODS"
 
    Friend Function InitMoveRaw() As Boolean
+      '' verifico che il pezzo sia depositabile
+      'If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+      '   ' mantengo la selezione del pezzo
+      '   EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+      '   OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+      '   EgtDraw()
+      '   ' non cambio pagina
+      '   Return False
+      'End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Recupero i tagli allungati prima definiti
@@ -158,14 +170,14 @@ Public Class MoveRawModeVM
                ' Distanza iniziale
                m_dCurrDist = 0
             End If
-         ' Non dovrebbe mai accadere, ma inizializzo con default
+            ' Non dovrebbe mai accadere, ma inizializzo con default
          Else
             m_vtDir = Vector3d.Y_AX()
             m_ptMid = Point3d.ORIG()
             m_dOrigDist = 0
             m_dCurrDist = 0
          End If
-      ' Altrimenti movimento con ventose
+         ' Altrimenti movimento con ventose
       Else
          m_bRemovedRaw = False
          m_bRawWithCups = False
@@ -182,7 +194,7 @@ Public Class MoveRawModeVM
       If OmagOFFICEMap.refMachiningTabVM.ByHand Then
          LRArrowVisibility = Visibility.Hidden
          RotationVisibility = Visibility.Hidden
-      ' Altrimenti per movimento con ventose
+         ' Altrimenti per movimento con ventose
       Else
          LRArrowVisibility = Visibility.Visible
          RotationVisibility = If(CurrentMachine.bRawSplMovRotate, Visibility.Visible, Visibility.Hidden)
@@ -195,6 +207,17 @@ Public Class MoveRawModeVM
    End Function
 
    Friend Function ExitMoveRaw() As Boolean
+      ' verifico che il pezzo sia depositabile
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+         EgtDraw()
+         ' non cambio pagina
+         Return False
+      End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
       ' Deseleziono tutto
       EgtDeselectAll()
       ' Se movimento con ventose
@@ -249,6 +272,141 @@ Public Class MoveRawModeVM
       NotifyPropertyChanged("MoveStep")
    End Sub
 
+   ' verifica che la posizione di rialascio sia corretta, altrimenti coreggo il vettore di posizione
+   Private Function VerifyReleasdPositionIsValid(ByRef vtMove As Vector3d) As Boolean
+      Dim bOk As Boolean = True
+      ' determino il punto finale dello spostamento
+      Dim ptEndPointLift As Point3d = VacuumCups.ptStartPointLift
+      ptEndPointLift.x += vtMove.x
+      ptEndPointLift.y += vtMove.y
+      Dim sInfo As String = String.Empty
+      Select Case VacuumCups.VerifyOutOfStrokes(ptEndPointLift, VacuumCups.dDegRotStartAng)
+         Case 1
+            ' extra corsa sulla x-: devo ridurre del valore di extra corsa
+            EgtGetOutstrokeInfo(sInfo)
+            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, 3, MSG_TYPE.WARNING)       'Extracorsa ...
+            ptEndPointLift.x -= vtMove.x
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.x) <= EPS_SMALL * 100 Then
+               vtMove.x = 0
+            Else
+               vtMove.x -= dMaxMove - EPS_SMALL * 100
+            End If
+            ptEndPointLift.x += vtMove.x
+            bOk = False
+         Case 2
+            ' extra corsa sulla x+: devo ridurre del valore di extra corsa
+            EgtGetOutstrokeInfo(sInfo)
+            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, 3, MSG_TYPE.WARNING)       'Extracorsa ...
+            ptEndPointLift.x -= vtMove.x
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.x) <= EPS_SMALL * 100 Then
+               vtMove.x = 0
+            Else
+               vtMove.x -= dMaxMove + EPS_SMALL * 100
+            End If
+            ptEndPointLift.x += vtMove.x
+            bOk = False
+         Case 4
+            ' extra corsa sulla y-
+            EgtGetOutstrokeInfo(sInfo)
+            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, 3, MSG_TYPE.WARNING)       'Extracorsa ...
+            ptEndPointLift.y -= vtMove.y
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.y) <= EPS_SMALL * 100 Then
+               vtMove.y = 0
+            Else
+               vtMove.y -= dMaxMove - EPS_SMALL * 100
+            End If
+            ptEndPointLift.y += vtMove.y
+            bOk = False
+         Case 8
+            ' extra corsa sulla y+
+            EgtGetOutstrokeInfo(sInfo)
+            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, 3, MSG_TYPE.WARNING)       'Extracorsa ...
+            ptEndPointLift.y -= vtMove.y
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.y) <= EPS_SMALL * 100 Then
+               vtMove.y = 0
+            Else
+               vtMove.y -= dMaxMove + EPS_SMALL * 100
+            End If
+            ptEndPointLift.y += vtMove.y
+            bOk = False
+      End Select
+      ' il movimento del pezzo è accettabile, aggiorno le posizione per la verifica dello step successivo
+      VacuumCups.ptStartPointLift = ptEndPointLift
+      Return bOk
+   End Function
+   ' verifica che la posizione di rialascio sia corretta, altrimenti coreggo l'angolo di posizione
+   Private Function VerifyReleasdAngleIsValid(ByRef dAngDeg As Double, ByVal ptCenter As Point3d) As Boolean
+      Dim bOk As Boolean = True
+      ' determino il punto finale dello spostamento
+      Dim ptEndPointLift As Point3d = VacuumCups.ptStartPointLift
+      Dim dDegRotEndAng As Double = VacuumCups.dDegRotStartAng + dAngDeg
+      ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+      Dim sInfo As String = String.Empty
+      Select Case VacuumCups.VerifyOutOfStrokes(ptEndPointLift, dDegRotEndAng)
+         Case 16
+            ' extra corsa sulla c-
+            EgtGetOutstrokeInfo(sInfo)
+            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, 3, MSG_TYPE.WARNING)       'Extracorsa ...
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), -dAngDeg)
+            dDegRotEndAng -= dAngDeg
+            dAngDeg += VacuumCups.GetExtraStrokeValue(sInfo) + EPS_SMALL
+            dDegRotEndAng += dAngDeg
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+            bOk = False
+         Case 34
+            ' extra corsa sulla c+
+            EgtGetOutstrokeInfo(sInfo)
+            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, 3, MSG_TYPE.WARNING)       'Extracorsa ...
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), -dAngDeg)
+            dDegRotEndAng -= dAngDeg
+            dAngDeg -= VacuumCups.GetExtraStrokeValue(sInfo) + EPS_SMALL
+            dDegRotEndAng += dAngDeg
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+            bOk = False
+      End Select
+      ' il movimento del pezzo è accettabile, aggiorno le posizione per la verifica dello step successivo
+      VacuumCups.ptStartPointLift = ptEndPointLift
+      VacuumCups.dDegRotStartAng = dDegRotEndAng
+      Return bOk
+   End Function
+
+   ' Veririfica che il grezzo non entri in colliosione con altri pezzi 
+   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer) As Boolean
+      If nIdOnVacumm = GDB_ID.NULL Then Return False
+      ' Creo gruppo temporaneo in cui generare le superfici per la veririfica di collisione
+      Dim m_nTempId As Integer = EgtCreateGroup(GDB_ID.ROOT)
+      If m_nTempId = GDB_ID.NULL Then Return False
+      EgtSetName(m_nTempId, "RawTemp")
+      Dim nIdActualRawOutLine As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawOutline")
+      Dim ActualRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdActualRawOutLine)
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      Dim nRawGroupId = EgtGetParent(EgtGetFirstRawPart())
+      Dim nIdRaw As Integer = EgtGetFirstRawPart()
+      ' ciclo su tutti i grezzi per veririficare eventuali collisioni
+      While nIdRaw <> GDB_ID.NULL
+         ' verifico la fase del grezzo
+         If EgtVerifyRawPartCurrPhase(nIdRaw) And nIdOnVacumm <> nIdRaw Then
+            ' recupero il contorno del pezzo
+            Dim nIdRawOutLine As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawOutline")
+            Dim nIdRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdRawOutLine)
+            If EgtSurfFrIntersect(nIdRawFlatRegion, ActualRawFlatRegion) Then
+               If EgtExistsObj(nIdRawFlatRegion) Then
+                  EgtErase(m_nTempId)
+                  ' esiste una intersezione delle superfici
+                  Return True
+               End If
+            End If
+         End If
+         nIdRaw = EgtGetNextRawPart(nIdRaw)
+      End While
+      EgtErase(m_nTempId)
+      Return False
+   End Function
+
 #End Region    ' METHODS
 
 #Region "COMMANDS"
@@ -286,9 +444,15 @@ Public Class MoveRawModeVM
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, m_dMoveStep, 0)
+               ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+               OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+               VerifyReleasdPositionIsValid(vtMove)
+               ' ----------- FINE verifica di essere entro i limiti macchina -----------
                If EgtMoveRawPart(nRawId, vtMove) Then
                   EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                   AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+               Else
+                  VacuumCups.ptStartPointLift.y -= vtMove.y
                End If
             Else
                ' Pezzo troppo piccolo : non si può muovere
@@ -320,9 +484,15 @@ Public Class MoveRawModeVM
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim vtMove As New Vector3d(-m_dMoveStep, 0, 0)
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+            VerifyReleasdPositionIsValid(vtMove)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtMoveRawPart(nRawId, vtMove) Then
                EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.x -= vtMove.x
             End If
          Else
             ' Pezzo troppo piccolo : non si può muovere
@@ -353,9 +523,15 @@ Public Class MoveRawModeVM
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim vtMove As New Vector3d(m_dMoveStep, 0, 0)
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+            VerifyReleasdPositionIsValid(vtMove)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtMoveRawPart(nRawId, vtMove) Then
                EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.x -= vtMove.x
             End If
          Else
             ' Pezzo troppo piccolo : non si può muovere
@@ -403,9 +579,15 @@ Public Class MoveRawModeVM
          Else
             If m_bRawWithCups Then
                Dim vtMove As New Vector3d(0, -m_dMoveStep, 0)
+               ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+               OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+               VerifyReleasdPositionIsValid(vtMove)
+               ' ----------- FINE verifica di essere entro i limiti macchina -----------
                If EgtMoveRawPart(nRawId, vtMove) Then
                   EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                   AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+               Else
+                  VacuumCups.ptStartPointLift.y -= vtMove.y
                End If
             Else
                ' Pezzo troppo piccolo : non si può muovere
@@ -437,12 +619,19 @@ Public Class MoveRawModeVM
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim dAng As Double = m_dRotationStep
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            ' Recupero il centro del grezzo
+            Dim ptRawCen As Point3d
+            EgtGetRawPartCenter(nRawId, ptRawCen)
+            OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+            VerifyReleasdAngleIsValid(dAng, ptRawCen)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAng) Then
-               ' Recupero il centro del grezzo
-               Dim ptRawCen As Point3d
-               EgtGetRawPartCenter(nRawId, ptRawCen)
                EgtRotate(GetVacuumId(), ptRawCen, Vector3d.Z_AX(), dAng, GDB_RT.GLOB)
                AddRawMoveData(nRawId, dAng, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.Rotate(ptRawCen, Vector3d.Z_AX(), dAng)
+               VacuumCups.dDegRotStartAng -= dAng
             End If
          Else
             OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2), 3, MSG_TYPE.WARNING)
@@ -472,12 +661,19 @@ Public Class MoveRawModeVM
       While nRawId <> GDB_ID.NULL
          If m_bRawWithCups Then
             Dim dAng As Double = -m_dRotationStep
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            ' Recupero il centro del grezzo
+            Dim ptRawCen As Point3d
+            EgtGetRawPartCenter(nRawId, ptRawCen)
+            OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+            VerifyReleasdAngleIsValid(dAng, ptRawCen)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
             If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAng) Then
-               ' Recupero il centro del grezzo
-               Dim ptRawCen As Point3d
-               EgtGetRawPartCenter(nRawId, ptRawCen)
                EgtRotate(GetVacuumId(), ptRawCen, Vector3d.Z_AX(), dAng, GDB_RT.GLOB)
                AddRawMoveData(nRawId, dAng, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.Rotate(ptRawCen, Vector3d.Z_AX(), dAng)
+               VacuumCups.dDegRotStartAng -= dAng
             End If
          Else
             OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2), 3, MSG_TYPE.WARNING)
@@ -545,17 +741,49 @@ Public Class MoveRawModeVM
          ' Se trovato il grezzo
          If nParentId = nRawGroupId Then
             Dim nStat As Integer = GDB_ST.ON_
+            ' Se il pezzo corrente è selezionato allora lo disattivo -> deposito del pezzo
             EgtGetStatus(nId, nStat)
             If nStat = GDB_ST.SEL Then
                EgtSetStatus(nId, GDB_ST.ON_)
-               ' Se con ventose, le nascondo
-               If Not OmagOFFICEMap.refMachiningTabVM.ByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola
+               If VerifyCollisionWithOtherRawPart(nId) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(nId, GDB_ST.SEL)
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+               Else
+                  ' Se con ventose, le nascondo
+                  If Not OmagOFFICEMap.refMachiningTabVM.ByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               End If
+
             Else
+
+               ' verifico che il pezzo precedente possa essere depositato correttamente
+               If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+                  EgtDraw()
+                  ' esco dal ciclo, prima devo depositare correttamente il pezzo
+                  Exit While
+               End If
+               ' salvo l'indice del pezzo correntemente attaccato alle ventose
+               m_CurrRawOnVacuum = nId
+
                EgtDeselectAll()
                EgtSetStatus(nId, GDB_ST.SEL)
                ' Se con ventose, le posiziono sul grezzo
                If Not OmagOFFICEMap.refMachiningTabVM.ByHand Then
                   Dim rmData As New RawMoveData
+                  ' inizializzo i dati del grezzo per il cacolo del peso
+                  Dim MaxSinglePlugger As Double = 250
+                  MaxSinglePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_SINGLEPLUGGER, MaxSinglePlugger, sMachIniFile)
+                  Dim MaxDoublePlugger As Double = 750
+                  MaxDoublePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_DOUBLEPLUGGER, MaxDoublePlugger, sMachIniFile)
+                  Dim AverageDensity As Double = 2700
+                  AverageDensity = GetPrivateProfileDouble(S_MATERIALS, K_AVERAGEDENSITY, AverageDensity, sMachIniFile)
+                  VacuumCups.GetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
+                  VacuumCups.GetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, sMachIniFile) <> 0)
+                  VacuumCups.GetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, sMachIniFile) <> 0)
                   If PutVacuumCupsOnRaw(nId, rmData) Then
                      ' Visualizzo le ventose
                      EgtSetStatus(GetVacuumId(), GDB_ST.ON_)
@@ -565,10 +793,19 @@ Public Class MoveRawModeVM
                      ' Reset eventuale messaggio
                      OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
                   Else
+                     ' Visualizzo le ventose
+                     EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
                      ' Aggiorno i dati
                      m_bRawWithCups = False
-                     ' Messaggio di avvertimento (Pezzo troppo piccolo : non si può muovere)
-                     OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2), 3, MSG_TYPE.WARNING)
+                     If VacuumCups.bOverWeight Then
+                        ' Messaggio di avvertimento (Pezzo troppo piccolo : non si può muovere)
+                        OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_MOVERAWPAGEUC + 4), 3, MSG_TYPE.WARNING)
+                     ElseIf VacuumCups.bExtraStroke Then
+                        OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_MOVERAWPAGEUC + 5), 3, MSG_TYPE.WARNING) 'Pezzo oltre le corse : non si può muovere
+                     Else
+                        ' Messaggio di avvertimento (Pezzo troppo piccolo : non si può muovere)
+                        OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2), 3, MSG_TYPE.WARNING)
+                     End If
                   End If
                End If
             End If
@@ -577,6 +814,15 @@ Public Class MoveRawModeVM
          End If
          nId = EgtGetNextObjInSelWin()
       End While
+
+      ' clicco su un oggetto che non è un grezzo -> verifico che il pezzo precedente possa essere depositato correttamente
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+         EgtDraw()
+      End If
+
    End Sub
 
 #End Region    ' EVENTS

OptionPanel/MachiningTab/SplitModeV.xaml

@@ -29,11 +29,13 @@
          </Grid.ColumnDefinitions>
 
          <Button Grid.Column="1"
+                 IsEnabled="{Binding bEnabledCommandMove}"
                  Style="{StaticResource OptionPanel_Button}"
                  Command="{Binding MoveUpCommand}">
             <Image Source="/Resources/MachiningTab/UpArrow.png"/>
          </Button>
          <Button Grid.Column="2"
+                 IsEnabled="{Binding bEnabledCommandMove}"
                  Style="{StaticResource OptionPanel_Button}"
                  Command="{Binding MoveDownCommand}">
             <Image Source="/Resources/MachiningTab/DownArrow.png"/>

OptionPanel/MachiningTab/SplitModeVM.vb

@@ -42,6 +42,17 @@ Public Class SplitModeVM
       End Get
    End Property
 
+   Private m_bEnabledCommandMove As Boolean = False
+   Public Property bEnabledCommandMove As Boolean
+      Get
+         Return m_bEnabledCommandMove
+      End Get
+      Set(value As Boolean)
+         m_bEnabledCommandMove = value
+         NotifyPropertyChanged("bEnabledCommandMove")
+      End Set
+   End Property
+
    Private m_SplitModeIsEnabled As Boolean
    Public Property SplitModeIsEnabled As Boolean
       Get
@@ -1054,16 +1065,21 @@ Public Class SplitModeVM
    Public Sub OnOff(ByVal param As Object)
       If m_CurrFirstInd = -1 Then Return
       For Index = m_CurrFirstInd To m_CurrLastInd
-         Dim nI As Integer = m_ItemList(Index).Ind
-         If m_MachiningList(nI).m_bEnabled Then
-            m_MachiningList(nI).m_bEnabled = False
-            m_ItemList(Index).bIsActive = False
-         Else
-            m_MachiningList(nI).m_bEnabled = True
-            m_ItemList(Index).bIsActive = True
+         If m_ItemList(Index).IsSelected Then
+            If Not m_ItemList(Index).IsSelected Then
+               Continue For
+            End If
+            Dim nI As Integer = m_ItemList(Index).Ind
+            If m_MachiningList(nI).m_bEnabled Then
+               m_MachiningList(nI).m_bEnabled = False
+               m_ItemList(Index).bIsActive = False
+            Else
+               m_MachiningList(nI).m_bEnabled = True
+               m_ItemList(Index).bIsActive = True
+            End If
+            ColorMachining(m_MachiningList(nI))
+            ColorNumberArrow(nI)
          End If
-         ColorMachining(m_MachiningList(nI))
-         ColorNumberArrow(nI)
       Next
       EgtDraw()
       ' Imposto flag di modifica
@@ -1156,6 +1172,9 @@ Public Class SplitModeVM
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Provo ad entrambi gli estremi
          Dim bModif As Boolean = AdjustBothCuts(nI)
@@ -1190,6 +1209,9 @@ Public Class SplitModeVM
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Eseguo
          If AdjustStartCut(nI) Then
@@ -1218,6 +1240,9 @@ Public Class SplitModeVM
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Eseguo
          If AdjustEndCut(nI) Then
@@ -1359,6 +1384,9 @@ Public Class SplitModeVM
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
             EgtSetCurrMachining(m_MachiningList(nI).m_nId)
@@ -1496,6 +1524,9 @@ Public Class SplitModeVM
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          If m_MachiningList(nI).m_sLay = NAME_OUTLOOP Then
             EgtSetCurrMachining(m_MachiningList(nI).m_nId)
@@ -1698,10 +1729,24 @@ Public Class SplitModeVM
    End Property
 
    Public Sub ModifStart(ByVal param As Object)
+      Dim bFirstInd As Boolean = True
+      Dim bFirstMill As Boolean = True
+      Dim bFirstWJ As Boolean = True
+      ' elenco delle variabili : MCH_MY.SAWING/MCH_MY.MILLING
+      Dim dUsal As Double = 0
+      ' elenco delle variabili : MCH_MY.WATERJETTING
+      Dim dWJAddLen As Double = 0
+      Dim bWJLiHole As Boolean = True
+      Dim nWJTangDist As Double = 0
+      Dim nWJPerpDist As Double = 0
+      Dim nWJLeadInType As Integer = 0
       ' Recupero la lavorazione corrente
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          Dim nOperId As Integer = m_MachiningList(nI).m_nId
          Dim nMachiningType As Integer = EgtGetOperationType(nOperId)
@@ -1710,14 +1755,19 @@ Public Class SplitModeVM
             Dim dOrigUsal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
             ' Dialogo richiesta valore
-            Dim ModifStartWindow As New ModifStartEndCutWindowV
-            Dim ModifStartWindowVM As New ModifStartEndCutWindowVM
-            ModifStartWindow.DataContext = ModifStartWindowVM
-            ModifStartWindow.Owner = Application.Current.MainWindow
-            ModifStartWindowVM.SetVal(dOrigUsal)
-            If Not ModifStartWindow.ShowDialog() Then Return
-            ' Modifica della lavorazione
-            Dim dUsal As Double = ModifStartWindowVM.GetVal()
+            If bFirstInd Then
+               Dim ModifStartWindow As New ModifStartEndCutWindowV
+               Dim ModifStartWindowVM As New ModifStartEndCutWindowVM
+               ModifStartWindowVM.Title = "Sawing"
+               ModifStartWindow.DataContext = ModifStartWindowVM
+               ModifStartWindow.Owner = Application.Current.MainWindow
+               ModifStartWindowVM.SetVal(dOrigUsal)
+               If Not ModifStartWindow.ShowDialog() Then Return
+               ' Modifica della lavorazione
+               dUsal = ModifStartWindowVM.GetVal()
+               bFirstInd = False
+            End If
+
             Dim bRepeat As Boolean = False
             Do
                EgtSetCurrMachining(nOperId)
@@ -1739,41 +1789,81 @@ Public Class SplitModeVM
             ColorMachining(m_MachiningList(nI))
             ColorNumberArrow(nI)
             bGenModif = True
-         ' se altrimenti getto d'acqua
-         ElseIf nMachiningType = MCH_MY.WATERJETTING Then
-            ' Recupero i valori attuali della lavorazione
-            Dim dAddLen As Double = 0
-            Dim bLiHole As Boolean = True
-            Dim nTangDist As Double = 0
-            Dim nPerpDist As Double = 0
-            Dim LeadInTypeId As Integer = 0
-            EgtSetCurrMachining(nOperId)
-            EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
-            EgtGetMachiningParam(MCH_MP.LIHOLE, bLiHole)
-            EgtGetMachiningParam(MCH_MP.LITANG, nTangDist)
-            EgtGetMachiningParam(MCH_MP.LIPERP, nPerpDist)
-            EgtGetMachiningParam(MCH_MP.LEADINTYPE, LeadInTypeId)
-            ' Dialogo richiesta valori
-            Dim ModifStartWnd As New ModifStartEndWjWindowV
-            Dim ModifStartWndVM As New ModifStartEndWjWindowVM
-            ModifStartWnd.DataContext = ModifStartWndVM
-            ModifStartWnd.Owner = Application.Current.MainWindow
-            ModifStartWndVM.HoleVisibility = Visibility.Visible
-            ModifStartWndVM.LeadInVisibility = Visibility.Visible
-            ModifStartWndVM.LeadOutVisibility = Visibility.Hidden
-            ModifStartWndVM.SetVal(dAddLen)
-            ModifStartWndVM.SetHole(bLiHole)
-            ModifStartWndVM.SetLeadInType(LeadInTypeId)
-            ModifStartWndVM.SetLiTangDist(nTangDist)
-            ModifStartWndVM.SetLiPerpDist(nPerpDist)
-            If Not ModifStartWnd.ShowDialog() Then Return
+
+         ElseIf nMachiningType = MCH_MY.MILLING Then ' And m_MachiningList(nI).m_sLay = NAME_ONPATH
+
+            ' leggo il valore salvato nella geometria
+            Dim dOrigUsal As Double = 0
+            EgtGetInfo(nOperId, INFO_MCH_USER_SAL, dOrigUsal)
+            ' Dialogo richiesta valore
+            If bFirstMill Then
+               Dim ModifStartWindow As New ModifStartEndCutWindowV
+               Dim ModifStartWindowVM As New ModifStartEndCutWindowVM
+               ModifStartWindowVM.Title = "Milling"
+               ModifStartWindow.DataContext = ModifStartWindowVM
+               ModifStartWindow.Owner = Application.Current.MainWindow
+               ModifStartWindowVM.SetVal(dOrigUsal)
+               If Not ModifStartWindow.ShowDialog() Then Return
+               ' Modifica della lavorazione
+               dUsal = ModifStartWindowVM.GetVal()
+               bFirstMill = False
+            End If
             ' Modifica della lavorazione
             EgtSetCurrMachining(nOperId)
-            EgtSetMachiningParam(MCH_MP.LIHOLE, ModifStartWndVM.GetHole())
-            EgtSetMachiningParam(MCH_MP.STARTADDLEN, ModifStartWndVM.GetVal())
-            EgtSetMachiningParam(MCH_MP.LEADINTYPE, ModifStartWndVM.GetLeadInType().Id)
-            EgtSetMachiningParam(MCH_MP.LITANG, ModifStartWndVM.GetLiTangDist())
-            EgtSetMachiningParam(MCH_MP.LIPERP, ModifStartWndVM.GetLiPerpDist())
+            Dim dAddLen As Double = 0
+            EgtGetMachiningParam(MCH_MP.STARTADDLEN, dAddLen)
+            EgtSetMachiningParam(MCH_MP.STARTADDLEN, dAddLen + dUsal - dOrigUsal)
+            EgtSetInfo(nOperId, INFO_MCH_USER_SAL, dUsal)
+            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+            bGenModif = True
+
+            ' se altrimenti getto d'acqua
+         ElseIf nMachiningType = MCH_MY.WATERJETTING Then
+            ' Recupero i valori attuali della lavorazione
+            If bFirstWJ Then
+               Dim bOriginalIsLeadIn As Boolean = True
+               Dim dOriginalAddLen As Double = 0
+               Dim bOriginalLiHole As Boolean = True
+               Dim nOriginalTangDist As Double = 0
+               Dim nOriginalPerpDist As Double = 0
+               Dim nOriginalLeadInType As Integer = 0
+               EgtSetCurrMachining(nOperId)
+               EgtGetMachiningParam(MCH_MP.STARTADDLEN, dOriginalAddLen)
+               EgtGetMachiningParam(MCH_MP.LIHOLE, bOriginalLiHole)
+               EgtGetMachiningParam(MCH_MP.LITANG, nOriginalTangDist)
+               EgtGetMachiningParam(MCH_MP.LIPERP, nOriginalPerpDist)
+               EgtGetMachiningParam(MCH_MP.LEADINTYPE, nOriginalLeadInType)
+               ' Dialogo richiesta valori
+               Dim ModifStartWnd As New ModifStartEndWjWindowV
+               Dim ModifStartWndVM As New ModifStartEndWjWindowVM
+               ModifStartWndVM.Title = "Water jetting"
+               ModifStartWnd.DataContext = ModifStartWndVM
+               ModifStartWnd.Owner = Application.Current.MainWindow
+               ModifStartWndVM.HoleVisibility = Visibility.Visible
+               ModifStartWndVM.LeadInVisibility = Visibility.Visible
+               ModifStartWndVM.LeadOutVisibility = Visibility.Hidden
+               ModifStartWndVM.SetVal(dOriginalAddLen)
+               ModifStartWndVM.SetHole(bOriginalLiHole)
+               ModifStartWndVM.SetLeadInType(nOriginalLeadInType)
+               ModifStartWndVM.SetLiTangDist(nOriginalTangDist)
+               ModifStartWndVM.SetLiPerpDist(nOriginalPerpDist)
+               If Not ModifStartWnd.ShowDialog() Then Return
+
+               dWJAddLen = ModifStartWndVM.GetVal()
+               bWJLiHole = ModifStartWndVM.GetHole()
+               nWJTangDist = ModifStartWndVM.GetLiTangDist()
+               nWJPerpDist = ModifStartWndVM.GetLiPerpDist()
+               nWJLeadInType = ModifStartWndVM.GetLeadInType().Id
+               bFirstWJ = False
+            End If
+
+            ' Modifica della lavorazione
+            EgtSetCurrMachining(nOperId)
+            EgtSetMachiningParam(MCH_MP.LIHOLE, bWJLiHole)
+            EgtSetMachiningParam(MCH_MP.STARTADDLEN, dWJAddLen)
+            EgtSetMachiningParam(MCH_MP.LEADINTYPE, nWJLeadInType)
+            EgtSetMachiningParam(MCH_MP.LITANG, nWJTangDist)
+            EgtSetMachiningParam(MCH_MP.LIPERP, nWJPerpDist)
             UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
             ' verifico interferenza
             EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
@@ -1803,10 +1893,24 @@ Public Class SplitModeVM
    End Property
 
    Public Sub ModifEnd(ByVal param As Object)
+      Dim bFirstInd As Boolean = True
+      Dim bFirstMill As Boolean = True
+      Dim bFirstWJ As Boolean = True
+      ' elenco delle variabili : MCH_MY.SAWING/MCH_MY.MILLING
+      Dim dUeal As Double = 0
+      ' elenco delle variabili : MCH_MY.WATERJETTING
+      Dim dWJAddLen As Double = 0
+      Dim nWJTangDist As Double = 0
+      Dim nWJPerpDist As Double = 0
+      Dim nWJLeadInType As Integer = 0
+
       ' Recupero la lavorazione corrente
       If m_CurrFirstInd = -1 Then Return
       Dim bGenModif As Boolean = False
       For Index = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          Dim nOperId As Integer = m_MachiningList(nI).m_nId
          Dim nMachiningType As Integer = EgtGetOperationType(nOperId)
@@ -1815,14 +1919,18 @@ Public Class SplitModeVM
             Dim dOrigUeal As Double = 0
             EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
             ' Dialogo richiesta valore
-            Dim ModifStartWindow As New ModifStartEndCutWindowV
-            Dim ModifStartWindowVM As New ModifStartEndCutWindowVM
-            ModifStartWindow.DataContext = ModifStartWindowVM
-            ModifStartWindow.Owner = Application.Current.MainWindow
-            ModifStartWindowVM.SetVal(dOrigUeal)
-            If Not ModifStartWindow.ShowDialog() Then Return
-            ' Modifica della lavorazione
-            Dim dUeal As Double = ModifStartWindowVM.GetVal()
+            If bFirstInd Then
+               Dim ModifStartWindow As New ModifStartEndCutWindowV
+               Dim ModifStartWindowVM As New ModifStartEndCutWindowVM
+               ModifStartWindowVM.Title = "Sawing"
+               ModifStartWindow.DataContext = ModifStartWindowVM
+               ModifStartWindow.Owner = Application.Current.MainWindow
+               ModifStartWindowVM.SetVal(dOrigUeal)
+               If Not ModifStartWindow.ShowDialog() Then Return
+               ' Modifica della lavorazione
+               dUeal = ModifStartWindowVM.GetVal()
+               bFirstInd = False
+            End If
             Dim bRepeat As Boolean = False
             Do
                EgtSetCurrMachining(nOperId)
@@ -1846,37 +1954,75 @@ Public Class SplitModeVM
             ColorMachining(m_MachiningList(nI))
             ColorNumberArrow(nI)
             bGenModif = True
+
+         ElseIf nMachiningType = MCH_MY.MILLING Then ' And m_MachiningList(nI).m_sLay = NAME_ONPATH
+
+            Dim dOrigUeal As Double = 0
+            EgtGetInfo(nOperId, INFO_MCH_USER_EAL, dOrigUeal)
+            ' ------------------ INIZIO PREPARAZIONE TASTIERINO VIRTUALE ------------------
+            If bFirstMill Then
+               Dim ModifStartWindow As New ModifStartEndCutWindowV
+               Dim ModifStartWindowVM As New ModifStartEndCutWindowVM
+               ModifStartWindowVM.Title = "Milling"
+               ModifStartWindow.DataContext = ModifStartWindowVM
+               ModifStartWindow.Owner = Application.Current.MainWindow
+               ModifStartWindowVM.SetVal(dOrigUeal)
+               If Not ModifStartWindow.ShowDialog() Then Return
+               ' Modifica della lavorazione
+               dUeal = ModifStartWindowVM.GetVal()
+               bFirstMill = False
+            End If
+            ' ------------------ FINE PREPARAZIONE TASTIERINO VIRTUALE ------------------
+            ' Modifica della lavorazione
+            EgtSetCurrMachining(nOperId)
+            Dim dAddLen As Double = 0
+            EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
+            EgtSetMachiningParam(MCH_MP.ENDADDLEN, dAddLen + dUeal - dOrigUeal)
+            EgtSetInfo(nOperId, INFO_MCH_USER_EAL, dUeal)
+            UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
+            bGenModif = True
+
             ' se altrimenti getto d'acqua
          ElseIf nMachiningType = MCH_MY.WATERJETTING Then
             ' Recupero i valori attuali della lavorazione
-            Dim dAddLen As Double = 0
-            Dim nTangDist As Double = 0
-            Dim nPerpDist As Double = 0
-            Dim LeadOutTypeId As Integer = 0
-            EgtSetCurrMachining(nOperId)
-            EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
-            EgtGetMachiningParam(MCH_MP.LOTANG, nTangDist)
-            EgtGetMachiningParam(MCH_MP.LOPERP, nPerpDist)
-            EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, LeadOutTypeId)
-            ' Dialogo richiesta valori
-            Dim ModifStartWnd As New ModifStartEndWjWindowV()
-            Dim ModifStartWndVM As New ModifStartEndWjWindowVM
-            ModifStartWnd.DataContext = ModifStartWndVM
-            ModifStartWnd.Owner = Application.Current.MainWindow
-            ModifStartWndVM.HoleVisibility = Visibility.Hidden
-            ModifStartWndVM.LeadInVisibility = Visibility.Hidden
-            ModifStartWndVM.LeadOutVisibility = Visibility.Visible
-            ModifStartWndVM.SetVal(dAddLen)
-            ModifStartWndVM.SetLeadOutType(LeadOutTypeId)
-            ModifStartWndVM.SetLoTangDist(nTangDist)
-            ModifStartWndVM.SetLoPerpDist(nPerpDist)
-            If Not ModifStartWnd.ShowDialog() Then Return
+            If bFirstWJ Then
+               Dim dAddLen As Double = 0
+               Dim nTangDist As Double = 0
+               Dim nPerpDist As Double = 0
+               Dim LeadOutTypeId As Integer = 0
+               EgtSetCurrMachining(nOperId)
+               EgtGetMachiningParam(MCH_MP.ENDADDLEN, dAddLen)
+               EgtGetMachiningParam(MCH_MP.LOTANG, nTangDist)
+               EgtGetMachiningParam(MCH_MP.LOPERP, nPerpDist)
+               EgtGetMachiningParam(MCH_MP.LEADOUTTYPE, LeadOutTypeId)
+               ' Dialogo richiesta valori
+               Dim ModifStartWnd As New ModifStartEndWjWindowV()
+               Dim ModifStartWndVM As New ModifStartEndWjWindowVM
+               ModifStartWndVM.Title = "Water jetting"
+               ModifStartWnd.DataContext = ModifStartWndVM
+               ModifStartWnd.Owner = Application.Current.MainWindow
+               ModifStartWndVM.HoleVisibility = Visibility.Hidden
+               ModifStartWndVM.LeadInVisibility = Visibility.Hidden
+               ModifStartWndVM.LeadOutVisibility = Visibility.Visible
+               ModifStartWndVM.SetVal(dAddLen)
+               ModifStartWndVM.SetLeadOutType(LeadOutTypeId)
+               ModifStartWndVM.SetLoTangDist(nTangDist)
+               ModifStartWndVM.SetLoPerpDist(nPerpDist)
+               If Not ModifStartWnd.ShowDialog() Then Return
+
+               dWJAddLen = ModifStartWndVM.GetVal()
+               nWJTangDist = ModifStartWndVM.GetLoTangDist()
+               nWJPerpDist = ModifStartWndVM.GetLoPerpDist()
+               nWJLeadInType = ModifStartWndVM.GetLeadOutType().Id
+
+               bFirstWJ = False
+            End If
             ' Modifica della lavorazione
             EgtSetCurrMachining(nOperId)
-            EgtSetMachiningParam(MCH_MP.ENDADDLEN, ModifStartWndVM.GetVal())
-            EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, ModifStartWndVM.GetLeadOutType().Id)
-            EgtSetMachiningParam(MCH_MP.LOTANG, ModifStartWndVM.GetLoTangDist())
-            EgtSetMachiningParam(MCH_MP.LOPERP, ModifStartWndVM.GetLoPerpDist())
+            EgtSetMachiningParam(MCH_MP.ENDADDLEN, dWJAddLen)
+            EgtSetMachiningParam(MCH_MP.LEADOUTTYPE, nWJLeadInType)
+            EgtSetMachiningParam(MCH_MP.LOTANG, nWJTangDist)
+            EgtSetMachiningParam(MCH_MP.LOPERP, nWJPerpDist)
             UpdateMachiningPreview(m_MachiningList(nI).m_nId, True)
             ' verifico interferenza
             EgtVerifyMachining(m_MachiningList(nI).m_nId, m_MachiningList(nI).m_nInterf)
@@ -1908,6 +2054,9 @@ Public Class SplitModeVM
    Public Sub Pause(ByVal param As Object)
       If m_CurrFirstInd = -1 Then Return
       For Index = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          Dim nOperId As Integer = m_MachiningList(nI).m_nId
          If GetPause(nOperId) Then
@@ -1940,6 +2089,9 @@ Public Class SplitModeVM
    Public Sub Invert(ByVal param As Object)
       If m_CurrFirstInd = -1 Then Return
       For Index = m_CurrFirstInd To m_CurrLastInd
+         If Not m_ItemList(Index).IsSelected Then
+            Continue For
+         End If
          Dim nI As Integer = m_ItemList(Index).Ind
          ' Si possono invertire solo i tagli di lama
          If m_MachiningList(nI).m_nType <> MCH_OY.SAWING Then Continue For
@@ -2252,29 +2404,34 @@ Public Class SplitModeVM
                ' ------------------------ verifico che le lavorazioni siano dello stesso tipo ------------------------
                OmagOFFICEMap.refSplitModeVM.VerifyHomogenousMachining(ItemList)
                ' -----------------------------------------------------------------------------------------------------
+               ' riordino l'elenco delle lavorazioni
+               ItemList.Sort(Function(x, y) Comparer(Of Integer).Default.Compare(OmagOFFICEMap.refSplitModeVM.m_ItemList.IndexOf(x), OmagOFFICEMap.refSplitModeVM.m_ItemList.IndexOf(y)))
+               ' ------------------------ verifico che le lavorazioni siano contigue ---------------------------------
+               OmagOFFICEMap.refSplitModeVM.bEnabledCommandMove = VerifyContinuity(ItemList)
+               ' -----------------------------------------------------------------------------------------------------
+
+               'If Not My.Computer.Keyboard.ShiftKeyDown And (My.Computer.Keyboard.CtrlKeyDown And value) Then
+               '   ' verifico che siano contigui
+               '   Dim bContigus As Boolean = False
+               '   Dim LastSel As NameIdLsBxItem = OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList(OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.Count - 1)
+               '   If OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.Count = 1 Then
+               '      bContigus = True
+               '   Else
+               '      For Each Item In ItemList
+               '         If Item.Ind = LastSel.Ind + 1 Or Item.Ind = LastSel.Ind - 1 Then
+               '            bContigus = True
+               '         End If
+               '      Next
+               '   End If
+               '   ' se non contiguo, elimino dai selezionati il primo(che è l'ultimo ad essere stato selezionato)
+               '   If Not bContigus Then
+               '      ItemList.Remove(LastSel)
+               '      OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.RemoveAt(OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.Count - 1)
+               '      OmagOFFICEMap.refSplitModeVM.ItemList(LastSel.Ind).IsSelected = Not value 'm_IsSelected = Not value
+               '      ' disabilito il pulsanti per spostare le lavorazioni
+               '   End If
+               'End If
 
-               ItemList.Sort(Function(x, y) Comparer(Of Integer).Default.Compare(OmagOFFICEMap.refSplitModeVM.m_ItemList.IndexOf(x),
-                                                                              OmagOFFICEMap.refSplitModeVM.m_ItemList.IndexOf(y)))
-               If Not My.Computer.Keyboard.ShiftKeyDown And (My.Computer.Keyboard.CtrlKeyDown And value) Then
-                  ' verifico che siano contigui
-                  Dim bContigus As Boolean = False
-                  Dim LastSel As NameIdLsBxItem = OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList(OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.Count - 1)
-                  If OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.Count = 1 Then
-                     bContigus = True
-                  Else
-                     For Each Item In ItemList
-                        If Item.Ind = LastSel.Ind + 1 Or Item.Ind = LastSel.Ind - 1 Then
-                           bContigus = True
-                        End If
-                     Next
-                  End If
-                  ' se non contiguo, elimino dai selezionati il primo(che è l'ultimo ad essere stato selezionato)
-                  If Not bContigus Then
-                     ItemList.Remove(LastSel)
-                     OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.RemoveAt(OmagOFFICEMap.refSplitModeVM.m_SelectedItemsList.Count - 1)
-                     OmagOFFICEMap.refSplitModeVM.ItemList(LastSel.Ind).IsSelected = Not value 'm_IsSelected = Not value
-                  End If
-               End If
                ' resetto marcatura lavorazioni
                If OmagOFFICEMap.refSplitModeVM.m_CurrFirstInd > -1 Then
                   For Index = OmagOFFICEMap.refSplitModeVM.m_CurrFirstInd To OmagOFFICEMap.refSplitModeVM.m_CurrLastInd
@@ -2298,6 +2455,20 @@ Public Class SplitModeVM
          End Set
       End Property
 
+      Public Function VerifyContinuity(ItemList As List(Of NameIdLsBxItem)) As Boolean
+         If ItemList.Count < 2 Then Return True
+         Dim bContigus As Boolean = False
+         For Index As Integer = 0 To ItemList.Count - 2
+            If ItemList(Index).Ind = ItemList(Index + 1).Ind + 1 Or ItemList(Index).Ind = ItemList(Index + 1).Ind - 1 Then
+               bContigus = True
+            Else
+               bContigus = False
+               Exit For
+            End If
+         Next
+         Return bContigus
+      End Function
+
       Public Property Type As Integer
          Get
             Return m_nType

OptionPanel/NestingTab/NestingTabV.xaml

@@ -154,14 +154,14 @@
             <ColumnDefinition Width="1*"/>
         </Grid.ColumnDefinitions>
         <Button Content="{Binding RemovePartMsg}"
-                Grid.ColumnSpan="{Binding DragRettangle_Cl_Span}"
+                Grid.ColumnSpan="{Binding DragRectangle_Cl_Span}"
                 Style="{StaticResource OptionPanel_TextButton}"
                 Command="{Binding RemovePartCommand}"
                 Margin="0,0,2.5,0"/>
-        <ToggleButton Content="{Binding DragRettangleMsg}" Grid.Column="1"
-                Visibility="{Binding DragRettangle_Visibility}"         
+        <ToggleButton Content="{Binding DragRectangleMsg}" Grid.Column="1"
+                Visibility="{Binding DragRectangle_Visibility}"         
                 Style="{StaticResource OptionPanel_ToggleButton}"
-                IsChecked="{Binding bDragRettangle}"
+                IsChecked="{Binding bDragRectangle}"
                 Margin="2.5,0,2.5,0"/>
     </Grid>
 

OptionPanel/NestingTab/NestingTabVM.vb

@@ -36,14 +36,14 @@ Public Class NestingTabVM
    Private m_bCsvData As Boolean = False
 
    ' Id del rettangolo, del traglio e della curva da modificare tramite Drag
-   Private m_nIdSelectedOutLoopRettangle As Integer = GDB_ID.NULL
-   Private m_nIdSelectedRegionRettangle As Integer = GDB_ID.NULL
-   Private m_nIdSelectedSawRettangle As Integer = GDB_ID.NULL
-   Private m_nIdSelectedCurvRettangle As Integer = GDB_ID.NULL
-   Private m_nIdSelectedTextRettangle As Integer = GDB_ID.NULL
-   Private m_nIdSelectedTextTopRettangle As Integer = GDB_ID.NULL
-   Private m_nIdSelectedFlatSurfRettangle As Integer = GDB_ID.NULL
-   Private m_SideListRettangle(4) As Integer
+   Private m_nIdSelectedOutLoopRectangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedRegionRectangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedSawRectangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedCurvRectangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedTextRectangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedTextTopRectangle As Integer = GDB_ID.NULL
+   Private m_nIdSelectedFlatSurfRectangle As Integer = GDB_ID.NULL
+   Private m_SideListRectangle(4) As Integer
    Private m_sTextContent As String = String.Empty
 
 
@@ -172,7 +172,7 @@ Public Class NestingTabVM
       End Get
    End Property
 
-   Public ReadOnly Property DragRettangleMsg As String
+   Public ReadOnly Property DragRectangleMsg As String
       Get
          Return "Drag Rectangle"
       End Get
@@ -228,13 +228,13 @@ Public Class NestingTabVM
 #Region "CONSTRUCTOR"
 
    Sub New()
-      If (GetMainPrivateProfileInt(S_NEST, K_DRAGRETTANGLE, 1) <> 0) Then
-         m_DragRettangle_Visibility = Visibility.Visible
+      If GetMainPrivateProfileInt(S_NEST, K_DRAGRECTANGLE, 1) <> 0 Then
+         m_DragRectangle_Visibility = Visibility.Visible
       Else
-         m_DragRettangle_Visibility = Visibility.Collapsed
+         m_DragRectangle_Visibility = Visibility.Collapsed
       End If
-      NotifyPropertyChanged("DragRettangle_Visibility")
-      NotifyPropertyChanged("DragRettangle_Cl_Span")
+      NotifyPropertyChanged("DragRectangle_Visibility")
+      NotifyPropertyChanged("DragRectangle_Cl_Span")
       ' Creo riferimento a questa classe in OmagOFFICEMap
       OmagOFFICEMap.SetRefNestingTabVM(Me)
    End Sub
@@ -551,14 +551,12 @@ Public Class NestingTabVM
       Return True
    End Function
 
-#Region "DRAG RETTANGLE"
+#Region "DRAG RECTANGLE"
 
    ' funzione chiamata da OnMyMouseMoveScene: verifica che la selezione sia corretta (deve essere il lato di una figura rettangolare)
-   Private Sub OnMyMouseDownSceneSelSideRettangle(sender As Object, e As System.Windows.Forms.MouseEventArgs)
-      ' Si può selezionare solo con il tasto sinistro e se il bottone TEST Attivo
-      If e.Button <> Windows.Forms.MouseButtons.Left Then
-         Return
-      End If
+   Private Sub OnMyMouseDownSceneSelSideRectangle(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+      ' Si può selezionare solo con il tasto sinistro
+      If e.Button <> Windows.Forms.MouseButtons.Left Then Return
       ' Verifico se selezionato indicativo di pezzo
       EgtSetObjFilterForSelWin(False, True, False, False, False)
       Dim nSelMy As Integer
@@ -574,8 +572,8 @@ Public Class NestingTabVM
          If sLayer = NAME_OUTLOOP Then
             If EgtGetType(nIdMy) = GDB_TY.CRV_LINE Then
                ' -------------------------------- INIZIO VERIFICHE --------------------------------
-               m_nIdSelectedOutLoopRettangle = nIdParent
-               If Not IsRettangle(m_SideListRettangle) Then
+               m_nIdSelectedOutLoopRectangle = nIdParent
+               If Not IsRectangle(m_SideListRectangle) Then
                   'm_CurrProjPage.ClearMessage()
                   'm_CurrProjPage.SetWarningMessage("Non è un rettangolo (0)")
                   Return
@@ -599,26 +597,26 @@ Public Class NestingTabVM
                Dim nIdSaw As Integer = EgtGetFirstNameInGroup(nIdPV, "Saw" & nIdMy.ToString)
                ' -------------------------------- FINE VERIFICHE --------------------------------
 
-               If Not EgtGetGroupObjs(nIdSaw) Then
-                  m_nIdSelectedSawRettangle = nIdSaw
-                  m_nIdSelectedCurvRettangle = nIdMy
+               If EgtGetGroupObjs(nIdSaw) <> 0 Then
+                  m_nIdSelectedSawRectangle = nIdSaw
+                  m_nIdSelectedCurvRectangle = nIdMy
 
-                  m_nIdSelectedRegionRettangle = EgtGetFirstNameInGroup(nIdParentPart, NAME_REGION)
-                  ' recupero i testi cintenuti nel layer Region
-                  If m_nIdSelectedRegionRettangle <> GDB_ID.NULL Then
-                     Dim nCurrId As Integer = EgtGetFirstInGroup(m_nIdSelectedRegionRettangle)
+                  m_nIdSelectedRegionRectangle = EgtGetFirstNameInGroup(nIdParentPart, NAME_REGION)
+                  ' recupero i testi contenuti nel layer Region
+                  If m_nIdSelectedRegionRectangle <> GDB_ID.NULL Then
+                     Dim nCurrId As Integer = EgtGetFirstInGroup(m_nIdSelectedRegionRectangle)
                      While nCurrId <> GDB_ID.NULL
                         If EgtGetType(nCurrId) = GDB_TY.EXT_TEXT Then
                            Dim sVal As String = String.Empty
                            EgtTextGetContent(nCurrId, sVal)
                            If sVal = "*TOP*" Then
-                              m_nIdSelectedTextTopRettangle = nCurrId
+                              m_nIdSelectedTextTopRectangle = nCurrId
                            Else
-                              m_nIdSelectedTextRettangle = nCurrId
-                              m_sTextContent = GetMyRettangleText(sVal)
+                              m_nIdSelectedTextRectangle = nCurrId
+                              m_sTextContent = GetMyRectangleText(sVal)
                            End If
                         ElseIf EgtGetType(nCurrId) = GDB_TY.SRF_FRGN Then
-                           m_nIdSelectedFlatSurfRettangle = nCurrId
+                           m_nIdSelectedFlatSurfRectangle = nCurrId
                         End If
                         nCurrId = EgtGetNext(nCurrId)
                      End While
@@ -631,15 +629,15 @@ Public Class NestingTabVM
                   Exit While
                End If
             End If
-            ' se le'elemto corrente non è una linea
+            ' se l'elemento corrente non è una linea
          End If
-         ' se le'elemto corrente non appartiene al layer OutLoop passo al prossimo elemento dell'elenco
+         ' se l'elemento corrente non appartiene al layer OutLoop passo al prossimo elemento dell'elenco
          nIdMy = EgtGetNextObjInSelWin()
       End While
    End Sub
 
    ' restituisce il valore del Text ripulito dalle dimensioni
-   Private Function GetMyRettangleText(sTextPz As String) As String
+   Private Function GetMyRectangleText(sTextPz As String) As String
       ' da DrawPageUC.xaml.vb/MultipleInsert
       Dim sText As String = String.Empty
       If sTextPz.Contains("<br/>") Then
@@ -650,56 +648,57 @@ Public Class NestingTabVM
       If sTextPz.Contains("  ") Then
          Dim sInfo() As String = sTextPz.Split(" "c)
          If sInfo.Count > 3 Then
-            Return sText = sInfo(0) & "  " & sInfo(1) & "  "
+            sText = sInfo(0) & "  " & sInfo(1) & "  "
+            Return sText
          End If
       End If
       Return sText
    End Function
 
    ' verifico che la figura selezionata sia realmente un rettangolo
-   Private Function IsRettangle(ByRef IdSideList() As Integer) As Boolean
+   Private Function IsRectangle(ByRef IdSideList() As Integer) As Boolean
       ' creo una lista con i lati del rettangolo
       Dim nCounter As Integer = 0
       ' recupero i lati dal leyer "OutLoop"
-      Dim IdSideRettangle As Integer = EgtGetFirstInGroup(m_nIdSelectedOutLoopRettangle)
-      While IdSideRettangle <> GDB_ID.NULL And nCounter < 4
+      Dim IdSideRectangle As Integer = EgtGetFirstInGroup(m_nIdSelectedOutLoopRectangle)
+      While IdSideRectangle <> GDB_ID.NULL And nCounter < 4
          Dim sVal As String = String.Empty
          Dim dPrevAng As Double = 0
-         EgtGetInfo(IdSideRettangle, "PrevAng", sVal)
+         EgtGetInfo(IdSideRectangle, "PrevAng", sVal)
          StringToDouble(sVal, dPrevAng)
          Dim dNextAng As Double = 0
-         EgtGetInfo(IdSideRettangle, "NextAng", sVal)
+         EgtGetInfo(IdSideRectangle, "NextAng", sVal)
          StringToDouble(sVal, dNextAng)
          ' se gli angoli non sono retti allora esco senza caricare il lato corrente
          If Math.Abs(dPrevAng - 90) > EPS_ANG_SMALL OrElse Math.Abs(dNextAng - 90) > EPS_ANG_SMALL Then
             Exit While
          End If
-         IdSideList(nCounter) = IdSideRettangle
+         IdSideList(nCounter) = IdSideRectangle
          nCounter += 1
-         IdSideRettangle = EgtGetNext(IdSideRettangle)
+         IdSideRectangle = EgtGetNext(IdSideRectangle)
       End While
       ' verifico che siano solo quattro lati
-      If IdSideRettangle = GDB_ID.NULL And nCounter = 4 Then
+      If IdSideRectangle = GDB_ID.NULL And nCounter = 4 Then
          ' solo se la figura ha 4 lati ortogonali
          Return True
       End If
 
-      m_nIdSelectedOutLoopRettangle = GDB_ID.NULL
+      m_nIdSelectedOutLoopRectangle = GDB_ID.NULL
       ' la figura presenta più/meno di 4 lati    
       Return False
    End Function
 
    ' recupero le informazioni correnti per sapere se la figura è mdificabile
-   Private Function GetRettangleInfoScale(ByRef frFixed As Frame3d, ByRef MaxLen As Double, ByRef MinLen As Double) As Vector3d
+   Private Function GetRectangleInfoScale(ByRef frFixed As Frame3d, ByRef MaxLen As Double, ByRef MinLen As Double) As Vector3d
       ' determino la direzione del lato selezionato
       Dim vtDirSelectedCurv As New Vector3d
-      EgtStartVector(m_nIdSelectedCurvRettangle, GDB_ID.ROOT, vtDirSelectedCurv)
+      EgtStartVector(m_nIdSelectedCurvRectangle, GDB_ID.ROOT, vtDirSelectedCurv)
 
       ' recupero il lato successivo a quello selezionato 
       Dim Index As Integer = 0
       Dim Len As Double = 0
       For Ind As Integer = 0 To 3
-         If m_SideListRettangle(Ind) = m_nIdSelectedCurvRettangle Then
+         If m_SideListRectangle(Ind) = m_nIdSelectedCurvRectangle Then
             ' verifico se esiste un lato Precedente altrimenti recupero l'ultimo della lista
             If Ind = 0 Then
                Index = 3
@@ -709,8 +708,8 @@ Public Class NestingTabVM
          End If
       Next
       ' recupero la dimensione del lato
-      EgtCurveLength(m_SideListRettangle(Index), MaxLen)
-      EgtCurveLength(m_nIdSelectedCurvRettangle, MinLen)
+      EgtCurveLength(m_SideListRectangle(Index), MaxLen)
+      EgtCurveLength(m_nIdSelectedCurvRectangle, MinLen)
 
       ' verifico che il lato selezionato sia il maggiore
       If MinLen > MaxLen Then Return Nothing
@@ -718,11 +717,11 @@ Public Class NestingTabVM
       ' determimo il versore dal lato appena calcolato
       Dim vtDir As New Vector3d
 
-      EgtStartVector(m_SideListRettangle(Index), GDB_ID.ROOT, vtDir)
+      EgtStartVector(m_SideListRectangle(Index), GDB_ID.ROOT, vtDir)
       vtDir.Normalize()
       Dim dProjectionBaseX As Double = vtDir * Vector3d.X_AX
       Dim ptFixed As New Point3d
-      EgtStartPoint(m_SideListRettangle(Index), GDB_ID.ROOT, ptFixed)
+      EgtStartPoint(m_SideListRectangle(Index), GDB_ID.ROOT, ptFixed)
 
       Dim vtPerp As New Vector3d(vtDir.x, vtDir.y, vtDir.z)
       vtPerp.Rotate(Vector3d.Z_AX, 90)
@@ -735,7 +734,7 @@ Public Class NestingTabVM
    End Function
 
    ' funzione chiamata da OnMyMouseMoveScene: gestisce la modifica lungo una dimensione del rettangolo selezionato
-   Private Sub OnMyMouseMoveSawRettangle(sender As Object, e As System.Windows.Forms.MouseEventArgs)
+   Private Sub OnMyMouseMoveSawRectangle(sender As Object, e As System.Windows.Forms.MouseEventArgs)
       ' Se drag non abilitato o già in esecuzione, esco
       If Not m_bDrag Or m_bDragging Then Return
       ' Se primo movimento di drag, verifico di aver superato la soglia di movimento in pixel
@@ -753,7 +752,7 @@ Public Class NestingTabVM
       Dim MaxLen As Double = 0
       Dim MinLen As Double = 0
       ' recupero info sul rettangolo selezionato
-      Dim vtDir As Vector3d = GetRettangleInfoScale(frFixed, MaxLen, MinLen)
+      Dim vtDir As Vector3d = GetRectangleInfoScale(frFixed, MaxLen, MinLen)
       If vtDir.Equals(Vector3d.NULL) Then
          Return
       End If
@@ -774,34 +773,34 @@ Public Class NestingTabVM
 
       ' Modifico dimensione figura
       If Math.Abs(dScalefactor) > EPS_SMALL * EPS_SMALL Then
-         EgtScale(m_nIdSelectedOutLoopRettangle, frFixed, dScalefactor, 1, 1, GDB_ID.ROOT)
-         EgtScale(m_nIdSelectedFlatSurfRettangle, frFixed, dScalefactor, 1, 1, GDB_ID.ROOT)
+         EgtScale(m_nIdSelectedOutLoopRectangle, frFixed, dScalefactor, 1, 1, GDB_RT.GLOB)
+         EgtScale(m_nIdSelectedFlatSurfRectangle, frFixed, dScalefactor, 1, 1, GDB_RT.GLOB)
          Dim ptCen As Point3d
-         EgtCenterPoint(m_nIdSelectedTextRettangle, ptCen)
-         EgtModifyText(m_nIdSelectedTextRettangle, m_sTextContent & LenToString(MaxLen + dProjection, 2) & " x " & LenToString(MinLen, 2))
-         EgtMove(m_nIdSelectedTextRettangle, vtMove * 0.5, GDB_ID.ROOT)
-         If m_nIdSelectedTextTopRettangle <> GDB_ID.NULL Then
-            EgtMove(m_nIdSelectedTextTopRettangle, vtMove * 0.5, GDB_ID.ROOT)
+         EgtCenterPoint(m_nIdSelectedTextRectangle, ptCen)
+         EgtModifyText(m_nIdSelectedTextRectangle, m_sTextContent & LenToString(MaxLen + dProjection, 2) & " x " & LenToString(MinLen, 2))
+         EgtMove(m_nIdSelectedTextRectangle, vtMove * 0.5, GDB_RT.GLOB)
+         If m_nIdSelectedTextTopRectangle <> GDB_ID.NULL Then
+            EgtMove(m_nIdSelectedTextTopRectangle, vtMove * 0.5, GDB_RT.GLOB)
          End If
       End If
 
       ' verifico che il il lato  maggiore rimanga semore il lato maggiore
-      Dim bRettangleCorrect As Boolean = False
-      If (MaxLen + dProjection - MinLen) > EPS_SMALL Then bRettangleCorrect = True
+      Dim bRectangleCorrect As Boolean = False
+      If (MaxLen + dProjection - MinLen) > EPS_SMALL Then bRectangleCorrect = True
 
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
       EnableReferenceRegion(False)
       ' se la modifica genera un errore allora ripristino la figura prima della defomrazione
-      If Not EgtVerifyPart(EgtGetParent(m_nIdSelectedOutLoopRettangle), True) Or Not bRettangleCorrect Then
-         EgtScale(m_nIdSelectedOutLoopRettangle, frFixed, 1 / dScalefactor, 1, 1, GDB_ID.ROOT)
-         EgtScale(m_nIdSelectedFlatSurfRettangle, frFixed, 1 / dScalefactor, 1, 1, GDB_ID.ROOT)
+      If Not EgtVerifyPart(EgtGetParent(m_nIdSelectedOutLoopRectangle), True) Or Not bRectangleCorrect Then
+         EgtScale(m_nIdSelectedOutLoopRectangle, frFixed, 1 / dScalefactor, 1, 1, GDB_RT.GLOB)
+         EgtScale(m_nIdSelectedFlatSurfRectangle, frFixed, 1 / dScalefactor, 1, 1, GDB_RT.GLOB)
          Dim ptCen As Point3d
-         EgtCenterPoint(m_nIdSelectedTextRettangle, ptCen)
-         EgtModifyText(m_nIdSelectedTextRettangle, m_sTextContent & LenToString(MaxLen, 2) & " x " & LenToString(MinLen, 2))
-         EgtMove(m_nIdSelectedTextRettangle, -vtMove * 0.5, GDB_ID.ROOT)
-         If m_nIdSelectedTextTopRettangle <> GDB_ID.NULL Then
-            EgtMove(m_nIdSelectedTextTopRettangle, -vtMove * 0.5, GDB_ID.ROOT)
+         EgtCenterPoint(m_nIdSelectedTextRectangle, ptCen)
+         EgtModifyText(m_nIdSelectedTextRectangle, m_sTextContent & LenToString(MaxLen, 2) & " x " & LenToString(MinLen, 2))
+         EgtMove(m_nIdSelectedTextRectangle, -vtMove * 0.5, GDB_RT.GLOB)
+         If m_nIdSelectedTextTopRectangle <> GDB_ID.NULL Then
+            EgtMove(m_nIdSelectedTextTopRectangle, -vtMove * 0.5, GDB_RT.GLOB)
          End If
       End If
 
@@ -813,20 +812,20 @@ Public Class NestingTabVM
    End Sub
 
    ' funzione chiamata da OnMyMouseUp: gestisce il reset di tutti gli indici in uso 
-   Public Sub ResetDragRettangleParam()
+   Public Sub ResetDragRectangleParam()
       ' deseleziono l'elemento corrente
-      EgtDeselectObj(m_nIdSelectedSawRettangle)
-      EgtDeselectObj(m_nIdSelectedCurvRettangle)
-      EgtResetMark(m_nIdSelectedSawRettangle)
+      EgtDeselectObj(m_nIdSelectedSawRectangle)
+      EgtDeselectObj(m_nIdSelectedCurvRectangle)
+      EgtResetMark(m_nIdSelectedSawRectangle)
       ' resetto gli indici
-      m_nIdSelectedOutLoopRettangle = GDB_ID.NULL
-      m_nIdSelectedRegionRettangle = GDB_ID.NULL
-      m_nIdSelectedSawRettangle = GDB_ID.NULL
-      m_nIdSelectedCurvRettangle = GDB_ID.NULL
-      m_nIdSelectedTextRettangle = GDB_ID.NULL
-      m_nIdSelectedTextTopRettangle = GDB_ID.NULL
-      m_nIdSelectedFlatSurfRettangle = GDB_ID.NULL
-      m_SideListRettangle = {GDB_ID.NULL, GDB_ID.NULL, GDB_ID.NULL, GDB_ID.NULL}
+      m_nIdSelectedOutLoopRectangle = GDB_ID.NULL
+      m_nIdSelectedRegionRectangle = GDB_ID.NULL
+      m_nIdSelectedSawRectangle = GDB_ID.NULL
+      m_nIdSelectedCurvRectangle = GDB_ID.NULL
+      m_nIdSelectedTextRectangle = GDB_ID.NULL
+      m_nIdSelectedTextTopRectangle = GDB_ID.NULL
+      m_nIdSelectedFlatSurfRectangle = GDB_ID.NULL
+      m_SideListRectangle = {GDB_ID.NULL, GDB_ID.NULL, GDB_ID.NULL, GDB_ID.NULL}
       m_sTextContent = String.Empty
       ' disattivo il drag
       m_bDrag = False
@@ -840,26 +839,26 @@ Public Class NestingTabVM
 
 #End Region    ' METHODS
 
-   Private m_bDragRettangle As Boolean
-   Public Property bDragRettangle As Boolean
+   Private m_bDragRectangle As Boolean
+   Public Property bDragRectangle As Boolean
       Get
-         Return m_bDragRettangle
+         Return m_bDragRectangle
       End Get
       Set(value As Boolean)
-         m_bDragRettangle = value
+         m_bDragRectangle = value
       End Set
    End Property
 
-   Private m_DragRettangle_Visibility As Visibility = Visibility.Collapsed
-   Public ReadOnly Property DragRettangle_Visibility As Visibility
+   Private m_DragRectangle_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property DragRectangle_Visibility As Visibility
       Get
-         Return m_DragRettangle_Visibility
+         Return m_DragRectangle_Visibility
       End Get
    End Property
 
-   Public ReadOnly Property DragRettangle_Cl_Span As Integer
+   Public ReadOnly Property DragRectangle_Cl_Span As Integer
       Get
-         If m_DragRettangle_Visibility = Visibility.Visible Then
+         If m_DragRectangle_Visibility = Visibility.Visible Then
             Return 1
          End If
          Return 2
@@ -1537,12 +1536,12 @@ Public Class NestingTabVM
 #Region "EVENTS"
 
    Friend Sub OnMouseDownScene(sender As Object, e As Windows.Forms.MouseEventArgs)
-      ' se in modalità DragRettangle (deformazione delle componenti rettangolari)
-      If m_bDragRettangle Then
-         OnMyMouseDownSceneSelSideRettangle(sender, e)
+      ' se in modalità DragRectangle (deformazione delle componenti rettangolari)
+      If m_bDragRectangle Then
+         OnMyMouseDownSceneSelSideRectangle(sender, e)
          ' Dati per drag (abilito il Drag)
          m_locPrev = e.Location
-         m_bDrag = EgtUnProjectPoint(e.Location, m_ptPrev) And m_nIdSelectedCurvRettangle <> GDB_ID.NULL
+         m_bDrag = EgtUnProjectPoint(e.Location, m_ptPrev) And m_nIdSelectedCurvRectangle <> GDB_ID.NULL
          m_bDragToStart = m_bDrag
          m_bVerify = m_bDrag AndAlso (Keyboard.Modifiers And ModifierKeys.Shift) > 0
          m_vtTotMove = Vector3d.NULL()
@@ -1570,7 +1569,7 @@ Public Class NestingTabVM
                If NameLayer = INFO_COUNTERLY Then
                   Dim sText As String = String.Empty
                   If EgtTextGetContent(nId, sText) Then
-                     Dim sItems() As String = sText.Split("#")
+                     Dim sItems() As String = sText.Split("#"c)
                      If sItems.Count > 1 Then
                         m_nCurrNubrOfParts = 0
                         If StringToInt(sItems(1), m_nCurrNubrOfParts) Then
@@ -1619,8 +1618,8 @@ Public Class NestingTabVM
       End If
 
       ' se devo muovere un lato del rettangolo
-      If m_bDragRettangle Then
-         OnMyMouseMoveSawRettangle(sender, e)
+      If m_bDragRectangle Then
+         OnMyMouseMoveSawRectangle(sender, e)
          Return
       End If
 
@@ -1725,9 +1724,9 @@ Public Class NestingTabVM
    End Sub
 
    Friend Sub OnMouseUpScene(sender As Object, e As System.Windows.Forms.MouseEventArgs)
-      If m_bDragRettangle Then
+      If m_bDragRectangle Then
          ' deseleziono gli oggeti, resetto le variabili usate, aggiorno il disegno
-         ResetDragRettangleParam()
+         ResetDragRectangleParam()
          Return
       End If
       ' Se eseguito drag

OptionWindow/OptionWindowVM.vb

@@ -71,7 +71,7 @@ Public Class OptionWindowVM
             OmagOFFICEMap.refRawPartTabVM.Refresh(PrevMeasureUnit)
             OmagOFFICEMap.refNestingTabVM.Refresh(PrevMeasureUnit)
             OmagOFFICEMap.refMoveRawModeVM.Refresh(PrevMeasureUnit)
-            OmagOFFICEMap.refSimulTabVM.MySimul.Refresh(PrevMeasureUnit)
+            If Not IsNothing(OmagOFFICEMap.refSimulTabVM.MySimul) Then OmagOFFICEMap.refSimulTabVM.MySimul.Refresh(PrevMeasureUnit)
          End If
       End Set
    End Property

TopCommandBar/TopCommandBarVM.vb

@@ -128,9 +128,9 @@ Public Class TopCommandBarVM
    ''' <summary>
    ''' Execute the New.  This method is invoked by the NewCommand.
    ''' </summary>
-   Friend Sub NewCmd(Optional bUseDefaults As Boolean = False)
+   Friend Sub NewCmd()
       OmagOFFICEMap.refSceneHostVM.NewProject()
-      OmagOFFICEMap.refMachGroupPanelVM.InitMachGroupList(bUseDefaults)
+      OmagOFFICEMap.refMachGroupPanelVM.InitMachGroupList(False)
    End Sub
 
 #End Region ' NewCommand