Gestione qualità tagli WJ in SplitPage

Migliorata gestione salvataggio lavorazioni
(cherry picked from commit c01972f99e)
2023-02-20 19:21:21 +01:00 · 2023-02-20 13:02:09 +01:00 · 2023-02-15 12:52:40 +01:00 · 2023-02-15 12:30:41 +01:00 · 2023-02-15 12:30:07 +01:00 · 2023-02-13 15:37:06 +01:00
49 changed files with 3483 additions and 565 deletions
@@ -108,6 +108,8 @@ Public Class CompoListPageVM
      End Get
      Set(value As Boolean)
         If m_SideAngle_IsChecked OrElse m_Drip_IsChecked Then Return
+         CompoWindowMap.refCompoSceneHostV.m_SelListHole.Clear()
+         CompoWindowMap.refCompoSceneHostV.m_DeselectListHole.Clear()
         m_FiloTop_IsChecked = value
         If value Then
            ' Se non ci sono loop interni, imposto quello esterno
@@ -122,6 +124,7 @@ Public Class CompoListPageVM
            SideEntityControl = New SideEntityControlV(m_SideEntityControlVM)
            m_CompoListVisibility = Visibility.Collapsed
            m_CompoBackVisibility = Visibility.Collapsed
+            CompoWindowMap.refCompoSceneHostV.SetRefSideEntityControlVM(m_SideEntityControlVM)
         Else
            m_SideEntityControlVM.Close()
            m_SideEntityControlVM = Nothing
@@ -22,8 +22,8 @@
                </ToggleButton.Content>
            </ToggleButton>
            
-            <!--FiloTop--><!--
-            <ToggleButton Padding="0"
+            <!--FiloTop-->
+            <!--<ToggleButton Padding="0"
                       IsChecked="{Binding FiloTop_IsChecked}"
                       Style="{StaticResource CompoWindow_ToggleButton}"
                       Margin="0,0,1.75,0"
@@ -67,8 +67,6 @@ Public Class CompoParamPageVM
   Private m_AlzAndFront_Visibility As Visibility 
   Public Property AlzAndFront_Visibility As Visibility
      Get
-         '' !!!! Temporaneamente in attesa di completamento Frontalini e alzatine !!!!
-         'Return Visibility.Collapsed 
         Return m_AlzAndFront_Visibility
      End Get
      Set(value As Visibility)
@@ -750,6 +748,50 @@ Public Class CompoParamPageVM
      NotifyPropertyChanged("MsgColor")
   End Sub

+   Private Sub UpdateInLoopReference(nCmp As Integer)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               Dim LocalList As New List(Of Integer) From {nIdInLoop}
+               If IsNothing(m_SideEntityControlVM) Then
+                  m_SideEntityControlVM = New SideEntityControlVM(SideEntityControlVM.CallingWindowOpt.COMPO,
+                                                            CompoWindowMap.refCompoSceneHostV.CompoScene,
+                                                            SideEntityControlVM.ModeOpt.FILOTOP)
+                  m_SideEntityControlVM.CreateFiloTopPreView(LocalList)
+               Else
+                  m_SideEntityControlVM.CreateFiloTopPreView(LocalList)
+               End If
+               EgtSetStatus(nLayFiloTop, GDB_ST.ON_)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
+   ' riceve la info "ID" della componente
+   Public Sub SetStatusVisibilityInLoopReference(nCmp As Integer, Status As GDB_ST)
+      ' aggiorno il layer "FiloTop"
+      Dim nIdInLoop As Integer = EgtGetFirstNameInGroup(EgtGetFirstGroupInGroup(GDB_ID.ROOT), "InLoop")
+      While nIdInLoop <> GDB_ID.NULL
+         Dim nCmpInfoIL As Integer = 0
+         If EgtGetInfo(nIdInLoop, "ID", nCmpInfoIL) AndAlso nCmp = nCmpInfoIL Then
+            Dim nLayFiloTop As Integer = GDB_ID.NULL
+            EgtGetInfo(nIdInLoop, "FiloTopRef", nLayFiloTop)
+            If nLayFiloTop <> GDB_ID.NULL Then
+               EgtSetStatus(nLayFiloTop, Status)
+               Exit While
+            End If
+         End If
+         nIdInLoop = EgtGetNextName(nIdInLoop, "InLoop")
+      End While
+   End Sub
+
 #End Region    ' METHODS

 #Region "COMMANDS"
@@ -867,6 +909,7 @@ Public Class CompoParamPageVM
            Dim nCmpInfo As Integer = 0
            If EgtGetInfo(nId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
               EgtSetStatus(nId, GDB_ST.OFF)
+               UpdateInLoopReference(nCmp)
               Exit While
            End If
            nId = EgtGetNextName(nId, "HoleLabels")
@@ -3,6 +3,11 @@ Imports EgtWPFLib5

 Public Class CompoSceneHostV

+   Public m_SelListHole As New List(Of Integer)
+   Public m_DeselectListHole As New List(Of Integer)
+
+   Private m_refSideEntityControlVM As SideEntityControlVM
+
   Private m_SelFromScene As Boolean = False
   Friend ReadOnly Property SelFromScene As Boolean
      Get
@@ -36,6 +41,10 @@ Public Class CompoSceneHostV
      EgtDraw()
   End Sub

+   Public Sub SetRefSideEntityControlVM(refSideEntityControl As SideEntityControlVM)
+      m_refSideEntityControlVM = refSideEntityControl
+   End Sub
+
   Private Sub PreInitializeScene()
      ' imposto colore di default
      Dim DefColor As New Color3d(0, 0, 0)
@@ -156,6 +165,8 @@ Public Class CompoSceneHostV
         Dim nCmpInfo As Integer = 0
         If EgtGetInfo(nHLId, "ID", nCmpInfo) AndAlso nCmp = nCmpInfo Then
            EgtSetStatus(nHLId, GDB_ST.ON_)
+            ' nascondo eventuali FiloTop
+            CompoWindowMap.refCompoParamPageVM.SetStatusVisibilityInLoopReference(nCmp, GDB_ST.OFF)
            Exit While
         End If
         nHLId = EgtGetNextName(nHLId, "HoleLabels")
@@ -262,6 +273,8 @@ Public Class CompoSceneHostV
                     EgtRemoveInfo(nLayId, INFO_DEPTH)
                     EgtResetColor(nLayId)
                  End If
+                  m_DeselectListHole.Add(nLayId)
+                  m_SelListHole.Remove(nLayId)
               Else
                  Dim sLayName As String = ""
                  If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP Then
@@ -272,12 +285,18 @@ Public Class CompoSceneHostV
                     EgtSetInfo(nLayId, INFO_DEPTH, SideAngleEntity.m_Parameter2)
                     EgtSetColor(nLayId, New Color3d(255, 255, 255))
                  End If
+                  m_SelListHole.Add(nLayId)
+                  m_DeselectListHole.Remove(nLayId)
               End If
               EgtDraw()
            End If
         End If
         nId = EgtGetNextObjInSelWin()
      End While
+      If Not IsNothing(m_refSideEntityControlVM) Then
+         m_refSideEntityControlVM.CreateFiloTopPreView(m_SelListHole)
+         m_refSideEntityControlVM.EraseFiloTopPreview(m_DeselectListHole)
+      End If
   End Sub

 #End Region    ' Events
@@ -18,6 +18,7 @@ Module ConstIni
   Public Const S_GENERAL As String = "General"
   Public Const K_DEBUG As String = "Debug"
   Public Const K_LICENCE As String = "Licence"
+   Public Const K_NETKEY As String = "NetKey"
   Public Const K_USERLEVEL As String = "UserLevel"
   Public Const K_MAXINST As String = "MaxInstances"
   Public Const K_INSTANCES As String = "Instances"
@@ -103,6 +104,8 @@ Module ConstIni
   Public Const K_ENGRAVENUMBER2 As String = "EngraveNumber2"
   Public Const K_ENGRAVEDEPTH As String = "EngraveDepth"
   Public Const K_ENGRAVESHORT As String = "EngraveShort"
+   Public Const K_ENGRAVEANGLE As String = "EngraveAngle"
+   Public Const K_ENGRAVEDEPTH2 As String = "EngraveDepth2"
   Public Const K_DRIPOFFSET As String = "DripOffset"
   Public Const K_DRIPOFFSET2 As String = "DripOffset2"
   Public Const K_DRIPDEPTH As String = "DripDepth"
@@ -110,6 +113,7 @@ Module ConstIni
   Public Const K_UNDERDRILLDEPTH As String = "UnderDrillDepth"
   Public Const K_FILOTOPOFFSET As String = "FiloTopOffset"
   Public Const K_FILOTOPDEPTH As String = "FiloTopDepth"
+   Public Const K_FILOTOPROUNDOFF As String = "FiloTopRoundOff"

   Public Const S_NEST As String = "Nest"
   Public Const K_DIRECT As String = "Direct"
@@ -121,7 +125,8 @@ Module ConstIni
   Public Const K_TEXTCOLOR As String = "TextColor"
   Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
   Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
-   Public Const K_DRAGRETTANGLE As String = "DragRectangle"
+   Public Const K_DRAGRECTANGLE As String = "DragRectangle"
+   Public Const K_STARTENDMODIFYONINTCORNER As String = "StartEndModifyOnIntCorner"

   Public Const S_SPLIT As String = "Split"
   Public Const K_MOVE_LEV As String = "MoveLevel"
@@ -29,9 +29,17 @@ Public Class CurrMachWindowVM
            m_SelCurrSawing = value
         End If
         CurrentMachine.sCurrSawing = m_SelCurrSawing
+         ' salvo la lvorazione corrente
+         WritePrivateProfileString(S_MACH_MACH, K_CURRSAWING_OFFICE, m_SelCurrSawing, sMachIniFile)
      End Set
   End Property

+   Public Sub SetCurrSawing(sCurrOfficeSawing As String)
+      m_SelCurrSawing = sCurrOfficeSawing
+      CurrentMachine.sCurrSawing = m_SelCurrSawing
+      NotifyPropertyChanged("SelCurrSawing")
+   End Sub
+
   Public ReadOnly Property CurrSawing_Visibility As Visibility
      Get
         If EgtGetHeadId("H1") = GDB_ID.NULL Then
@@ -149,10 +157,18 @@ Public Class CurrMachWindowVM
         If value <> m_SelCurrDrilling Then
            m_SelCurrDrilling = value
            CurrentMachine.sCurrDrilling = m_SelCurrDrilling
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRDRILLING_OFFICE, m_SelCurrDrilling, sMachIniFile)
         End If
      End Set
   End Property

+   Public Sub SetCurrDrilling(sCurrOfficeDrilling As String)
+      m_SelCurrDrilling = sCurrOfficeDrilling
+      CurrentMachine.sCurrDrilling = m_SelCurrDrilling
+      NotifyPropertyChanged("SelCurrDrilling")
+   End Sub
+
   Private m_CurrDrilling_Visibility As Visibility
   Public Property CurrDrilling_Visibility As Visibility
      Get
@@ -187,10 +203,18 @@ Public Class CurrMachWindowVM
         If value <> m_SelCurrMilling Then
            m_SelCurrMilling = value
            CurrentMachine.sCurrMilling = m_SelCurrMilling
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRMILLING_OFFICE, m_SelCurrMilling, sMachIniFile)
         End If
      End Set
   End Property

+   Public Sub SetCurrMilling(sCurrOfficeMilling As String)
+      m_SelCurrMilling = sCurrOfficeMilling
+      CurrentMachine.sCurrMilling = m_SelCurrMilling
+      NotifyPropertyChanged("SelCurrMilling")
+   End Sub
+
   Private m_CurrMilling_Visibility As Visibility
   Public Property CurrMilling_Visibility As Visibility
      Get
@@ -225,10 +249,18 @@ Public Class CurrMachWindowVM
         If value <> m_SelCurrPocketing Then
            m_SelCurrPocketing = value
            CurrentMachine.sCurrPocketing = m_SelCurrPocketing
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRPOCKETING_OFFICE, m_SelCurrPocketing, sMachIniFile)
         End If
      End Set
   End Property

+   Public Sub SetCurrPocketing(sCurrOfficePocketing As String)
+      m_SelCurrPocketing = sCurrOfficePocketing
+      CurrentMachine.sCurrPocketing = m_SelCurrPocketing
+      NotifyPropertyChanged("SelCurrPocketing")
+   End Sub
+
   Private m_CurrPocketing_Visibility As Visibility
   Public Property CurrPocketing_Visibility As Visibility
      Get
@@ -263,10 +295,18 @@ Public Class CurrMachWindowVM
         If value <> m_SelCurrWaterjetting Then
            m_SelCurrWaterjetting = value
            CurrentMachine.sCurrWaterJetting = m_SelCurrWaterjetting
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRWATERJETTING_OFFICE, m_SelCurrWaterjetting, sMachIniFile)
         End If
      End Set
   End Property

+   Public Sub SetCurrWaterjetting(sCurrOfficeWaterjetting As String)
+      m_SelCurrWaterjetting = sCurrOfficeWaterjetting
+      CurrentMachine.sCurrWaterJetting = m_SelCurrWaterjetting
+      NotifyPropertyChanged("SelCurrWaterjetting")
+   End Sub
+
   Private m_CurrWaterjettingQualityList As New List(Of String)
   Public Property CurrWaterjettingQualityList As List(Of String)
      Get
@@ -286,10 +326,18 @@ Public Class CurrMachWindowVM
         If value <> m_SelCurrWaterjettingQuality Then
            m_SelCurrWaterjettingQuality = value
            CurrentMachine.sCurrWaterJettingQuality = m_SelCurrWaterjettingQuality
+            ' salvo la lvorazione corrente
+            WritePrivateProfileString(S_MACH_MACH, K_CURRWATERJETTINGQUALITY_OFFICE, m_SelCurrWaterjettingQuality, sMachIniFile)
         End If
      End Set
   End Property

+   Public Sub SetCurrWaterjettingQuality(sCurrOfficeWaterjettingQuality As String)
+      m_SelCurrWaterjettingQuality = sCurrOfficeWaterjettingQuality
+      CurrentMachine.sCurrWaterJettingQuality = m_SelCurrWaterjettingQuality
+      NotifyPropertyChanged("SelCurrWaterjetting")
+   End Sub
+
   Private m_CurrWaterjetting_Visibility As Visibility = Visibility.Collapsed
   Public Property CurrWaterjetting_Visibility As Visibility
      Get
@@ -472,11 +520,13 @@ Public Class CurrMachWindowVM

      If m_CurrSawingList.Count > 0 Then
         If CurrentMachine.sCurrSawing <> String.Empty Then
-            SelCurrSawing = CurrentMachine.sCurrSawing
+            SetCurrSawing(CurrentMachine.sCurrSawing)
         Else
            Dim sCurrSawing As String = ""
-            GetPrivateProfileString(S_MACH_MACH, K_CURRSAWING, Nothing, sCurrSawing, sMachIniFile)
-            SelCurrSawing = sCurrSawing
+            ' GetPrivateProfileString(S_MACH_MACH, K_CURRSAWING, Nothing, sCurrSawing, sMachIniFile)
+            GetPrivateProfileString(S_MACH_MACH, K_CURRSAWING_OFFICE, Nothing, sCurrSawing, sMachIniFile)
+            'SelCurrSawing = sCurrSawing
+            SetCurrSawing(sCurrSawing)
         End If
      Else
         CurrentMachine.sCurrSawing = String.Empty
@@ -486,7 +536,11 @@ Public Class CurrMachWindowVM
      If CurrentMachine.bDrilling And m_CurrDrillingList.Count > 1 Then
         CurrDrilling_Visibility = Visibility.Visible
         If CurrentMachine.sCurrDrilling <> String.Empty Then
-            SelCurrDrilling = CurrentMachine.sCurrDrilling
+            SetCurrDrilling(CurrentMachine.sCurrDrilling)
+         Else
+            Dim sCurrMachining As String = ""
+            GetPrivateProfileString(S_MACH_MACH, K_CURRDRILLING_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+            SetCurrDrilling(sCurrMachining)
         End If
      Else
         CurrDrilling_Visibility = Visibility.Collapsed
@@ -495,7 +549,11 @@ Public Class CurrMachWindowVM
      If CurrentMachine.bMilling And m_CurrMillingList.Count > 1 Then
         CurrMilling_Visibility = Visibility.Visible
         If CurrentMachine.sCurrMilling <> String.Empty Then
-            SelCurrMilling = CurrentMachine.sCurrMilling
+            SetCurrMilling(CurrentMachine.sCurrMilling)
+         Else
+            Dim sCurrMachining As String = ""
+            GetPrivateProfileString(S_MACH_MACH, K_CURRMILLING_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+            SetCurrMilling(sCurrMachining)
         End If
      Else
         CurrMilling_Visibility = Visibility.Collapsed
@@ -504,7 +562,11 @@ Public Class CurrMachWindowVM
      If CurrentMachine.bPocketing And CurrPocketingList.Count > 1 Then
         CurrPocketing_Visibility = Visibility.Visible
         If CurrentMachine.sCurrPocketing <> String.Empty Then
-            SelCurrPocketing = CurrentMachine.sCurrPocketing
+            SetCurrPocketing(CurrentMachine.sCurrPocketing)
+         Else
+            Dim sCurrMachining As String = ""
+            GetPrivateProfileString(S_MACH_MACH, K_CURRPOCKETING_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+            SetCurrPocketing(sCurrMachining)
         End If
      Else
         CurrPocketing_Visibility = Visibility.Collapsed
@@ -515,10 +577,18 @@ Public Class CurrMachWindowVM
         ' se DB WaterJet abilitato avrò anche la CmBx della Quality solo la CmBx del Waterjetting corrente
         If CurrentMachine.bFromDBWaterJet Then
            If CurrentMachine.sCurrWaterJetting <> String.Empty Then
-               SelCurrWaterjetting = CurrentMachine.sCurrWaterJetting
+               SetCurrWaterjetting(CurrentMachine.sCurrWaterJetting)
+            Else
+               Dim sCurrMachining As String = ""
+               GetPrivateProfileString(S_MACH_MACH, K_CURRWATERJETTING_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+               SetCurrWaterjetting(sCurrMachining)
            End If
            If CurrentMachine.sCurrWaterJettingQuality <> String.Empty Then
-               SelCurrWaterjettingQuality = CurrentMachine.sCurrWaterJettingQuality
+               SetCurrWaterjettingQuality(CurrentMachine.sCurrWaterJettingQuality)
+            Else
+               Dim sCurrMachining As String = ""
+               GetPrivateProfileString(S_MACH_MACH, K_CURRWATERJETTINGQUALITY_OFFICE, Nothing, sCurrMachining, sMachIniFile)
+               SetCurrWaterjettingQuality(sCurrMachining)
            End If
            CurrWaterjettingQuality_Visibility = Visibility.Visible
         Else
@@ -95,6 +95,82 @@ Friend Module CamAuto
      Return True
   End Function

+   Friend Function ResetAllSplitCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, "AUX_SPLIT_WJ")
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, "JoinEntity")
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' elimino il layer dei flag di separazione "AUX_SPLIT_WJ"
+         Dim IdAuxLayer As Integer = EgtGetFirstNameInGroup(nIdPart, "AUX_SPLIT_WJ")
+         EgtErase(IdAuxLayer)
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+         While nIdMy <> GDB_ID.NULL
+            EgtRemoveInfo(nIdMy, "JoinEntity")
+            nIdMy = EgtGetNext(nIdMy)
+         End While
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllStartCurv() As Boolean
+      Dim bOk As Boolean = True
+      Dim nIdPart As Integer = EgtGetFirstPart()
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, "Start")
+         nIdPart = EgtGetNextPart(nIdPart)
+      End While
+      Dim nRawId As Integer = CamAuto.GetCurrentRaw()
+      nIdPart = EgtGetFirstPartInRawPart(nRawId)
+      While nIdPart <> GDB_ID.NULL
+         ' accedo al Layer OutLoop
+         Dim nIdLayerOutLoop As Integer = EgtGetFirstNameInGroup(nIdPart, NAME_OUTLOOP)
+         EgtRemoveInfo(nIdLayerOutLoop, "Start")
+         nIdPart = EgtGetNextPartInRawPart(nIdPart)
+      End While
+      Return bOk
+   End Function
+
+   Friend Function ResetAllBridges() As Boolean
+      Dim bOk As Boolean = True
+      Dim nMachGroup As Integer = EgtGetCurrMachGroup()
+      Dim nBridgesGroup As Integer = EgtGetFirstNameInGroup(nMachGroup, "Bridges")
+      bOk = EgtErase(nBridgesGroup)
+      Return bOk
+   End Function
+
+   ' verifico che il contorno passato non sia stato separato
+   Friend Function VerifyOutLoopIsClosed(nIdLayerOutLoop As Integer) As Boolean
+      Dim nIdMy As Integer = EgtGetFirstInGroup(nIdLayerOutLoop)
+      While nIdMy <> GDB_ID.NULL
+         Dim nValInfo As Integer = 1
+         If EgtGetInfo(nIdMy, "JoinEntity", nValInfo) Then
+            If nValInfo = 0 Then Return False
+         End If
+         EgtRemoveInfo(nIdMy, "JoinEntity")
+         nIdMy = EgtGetNext(nIdMy)
+      End While
+      Return True
+   End Function
+
   Friend Function RemoveFinalEmptyPhases() As Boolean
      Dim nOpeId As Integer = EgtGetLastOperation()
      While nOpeId <> GDB_ID.NULL
@@ -35,6 +35,8 @@ Module ConstMach
   Public Const KEY_VACLAY_PREFROT As String = "PreferredRot"
   Public Const KEY_VACLAY_PREFVROTXMINUS As String = "PrefVertRotXMinus"
   Public Const KEY_VACLAY_PREFVROTXPLUS As String = "PrefVertRotXPlus"
+   Public Const KEY_VACLAY_PREFVROTYMINUS As String = "PrefVertRotYMinus"
+   Public Const KEY_VACLAY_PREFVROTYPLUS As String = "PrefVertRotYPlus"
   ' Info in gruppo layout per direzione di riferimento ventose per tagli da sotto
   Public Const KEY_VACLAY_DRIPREFDIR As String = "DripRefDir"
   ' Info in asse rotante ventosa per step discreti
@@ -156,8 +158,11 @@ Module ConstMach
   Public Const NAME_UNDERDRILL As String = "UnderDrill"
   ' Nome layer preview
   Public Const NAME_PREVIEW As String = "PV"
+   Public Const NAME_BRIDGES As String = "Bridges"
+   Public Const NAME_BRIDGESLINE As String = "BridgeLine"
   ' Info in layer contorno interno per FiloTop
   Public Const INFO_FILOTOP As String = "FiloTop"
+   Public Const INFO_ROUNDOFF As String = "RoundOff"
   ' Info in entità da tagliare per affondamento
   Public Const INFO_DEPTH As String = "Depth"
   Public Const INFO_DEPTH2 As String = "Depth2"
@@ -249,6 +254,12 @@ Module ConstMach
   Public Const SELECT_REGION_LAYER As String = "SelectRegion"
   ' Info in pezzo per stato rotazione
   Public Const INFO_PARTROT As String = "ROT"
+   ' Info in entità in OutLoop per indicare se è separata WaterJet
+   Public Const INFO_JOINTENTITY As String = "JoinEntity"
+   ' Nome layer per "*" inidcanti un lato separato nel taglio WaterJet
+   Public Const INFO_AUX_SPLIT_WJ As String = "AUX_SPLIT_WJ"
+   ' Info in OutLoop per punto inzio lavorazione WaterJet
+   Public Const INFO_START As String = "Start"

   ' Nome di pezzo che è una cornice
   Public Const NAME_FRAME As String = "Frame"
@@ -315,6 +326,9 @@ Module ConstMach
   Public Function COL_MCH_DRIPCUT() As Color3d
      Return New Color3d(255, 0, 165)
   End Function
+   Public Function COL_MCH_ONENGRAVE_ANG() As Color3d
+      Return New Color3d(255, 255, 100)
+   End Function
   Public Function COL_MCH_DRIPFREE() As Color3d
      Return New Color3d(192, 0, 128)
   End Function
@@ -198,6 +198,10 @@
   Public Const S_MACH_RAWMOVE As String = "RawMove"
   Public Const K_MACH_RM_ROTATE As String = "Rotate"
   Public Const K_MACH_RM_FINALMOVE As String = "FinalMove"
+   Public Const K_MACH_WEIGHT_SINGLEPLUGGER As String = "MaxWeightSinglePlugger"
+   Public Const K_MACH_WEIGHT_DOUBLEPLUGGER As String = "MaxWeightDoublePlugger"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEY As String = "RotateVacuumForExtraStrokeY"
+   Public Const K_MACH_ROTATEVACUUMFOREXTRASTROKEX As String = "RotateVacuumForExtraStrokeX"

   Public Const S_MACH_REG As String = "Reg"
   Public Const K_MACH_MAX_ROT_ANG As String = "MaxRotAng"
@@ -243,9 +247,13 @@
   Public Const K_CURRDRIPDRILL As String = "CurrDripDrill"
   Public Const K_CURRWATERJET As String = "CurrWaterJet"
   Public Const K_CURRSAWING As String = "CurrSawing"
+   Public Const K_CURRSAWING_OFFICE As String = "CurrOfficeSawing"
   Public Const K_CURRDRILLING As String = "CurrDrilling"
+   Public Const K_CURRDRILLING_OFFICE As String = "CurrOfficeDrilling"
   Public Const K_CURRMILLING As String = "CurrMilling"
+   Public Const K_CURRMILLING_OFFICE As String = "CurrOfficeMilling"
   Public Const K_CURRPOCKETING As String = "CurrPocketing"
+   Public Const K_CURRPOCKETING_OFFICE As String = "CurrOfficePocketing"
   Public Const K_CURRSAWROUGHING As String = "CurrSawRoughing"
   Public Const K_CURRSAWFINISHING As String = "CurrSawFinishing"
   Public Const K_CURRSAWSIDEFINISHING As String = "CurrSawSideFinishing"
@@ -253,13 +261,16 @@
   Public Const K_CURRDRIPSAWING As String = "CurrDripSawing"
   Public Const K_CURRDRIPDRILLING As String = "CurrDripDrilling"
   Public Const K_CURRWATERJETTING As String = "CurrWaterJetting"
+   Public Const K_CURRWATERJETTING_OFFICE As String = "CurrOfficeWaterJetting"
   Public Const K_CURRWATERJETTINGQUALITY As String = "CurrWaterJettingQuality"
+   Public Const K_CURRWATERJETTINGQUALITY_OFFICE As String = "CurrWaterJettingQuality"

   Public Const S_MATERIALS As String = "Materials"
   Public Const K_CURRMATERIAL As String = "CurrMaterial"
   Public Const K_CURROFFICEMATERIAL As String = "CurrOfficeMaterial"
   Public Const K_MATERIAL As String = "Material"
   Public Const K_FROMDBWATERJET As String = "FromDBWaterJet"
+   Public Const K_AVERAGEDENSITY As String = "AverageDensity"

   Public Const S_SETUP As String = "SetUp"
   Public Const K_DEFAULT As String = "Default"
@@ -1415,6 +1415,16 @@ Friend Property sCurrMillNoTip As String
      OmagOFFICEMap.refMachinePanelVM.NotifyPropertyChanged(NameOf(OmagOFFICEMap.refMachinePanelVM.WjDb_Visibility))
   End Sub

+   ' recupro dalla lista delle macchine l'oggetto associato al nome indicato
+   Public Sub GetMachineClass(sMachineName As String)
+      For Each Item In OmagOFFICEMap.refMachinePanelVM.MachineList
+         If string.Compare(Item.Name, sMachineName, True) = 0 Then
+            OmagOFFICEMap.refMachinePanelVM.SelectedMachine = Item
+            Exit For
+         End If
+      Next
+   End Sub
+
   Public Sub LoadWJMaterial(Optional bIsStart As Boolean = False)
      Dim TempCurrMat As Material = CurrMat
      ' Svuoto l'attuale lista di materiali e delle qualità
@@ -247,7 +247,7 @@ Module EstCalc
   Friend Function SetCurrSawing(sCurrSawing As String) As Boolean
      Dim nOperId As Integer = EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Opers")
      If nOperId = GDB_ID.NULL Then Return False
-      Return EgtSetInfo(nOperId, INFO_CURRSAWING, sCurrSawing)
+      Return EgtSetInfo(nOperId, INFO_CURRSAWING, sCurrSawing, True)
   End Function

   Friend Function GetCurrSawing() As String
@@ -261,7 +261,7 @@ Module EstCalc
   Friend Function SetCurrMilling(sCurrMilling As String) As Boolean
      Dim nOperId As Integer = EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Opers")
      If nOperId = GDB_ID.NULL Then Return False
-      Return EgtSetInfo(nOperId, INFO_CURRMILLING, sCurrMilling)
+      Return EgtSetInfo(nOperId, INFO_CURRMILLING, sCurrMilling, True)
   End Function

   Friend Function GetCurrMilling() As String
@@ -275,7 +275,7 @@ Module EstCalc
   Friend Function SetCurrDrilling(sCurrDrilling As String) As Boolean
      Dim nOperId As Integer = EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Opers")
      If nOperId = GDB_ID.NULL Then Return False
-      Return EgtSetInfo(nOperId, INFO_CURRDRILLING, sCurrDrilling)
+      Return EgtSetInfo(nOperId, INFO_CURRDRILLING, sCurrDrilling, True)
   End Function

   Friend Function GetCurrDrilling() As String
@@ -289,7 +289,7 @@ Module EstCalc
   Friend Function SetCurrPocketing(sCurrMilling As String) As Boolean
      Dim nOperId As Integer = EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Opers")
      If nOperId = GDB_ID.NULL Then Return False
-      Return EgtSetInfo(nOperId, INFO_CURRPOCKETING, sCurrMilling)
+      Return EgtSetInfo(nOperId, INFO_CURRPOCKETING, sCurrMilling, True)
   End Function

   Friend Function GetCurrPocketing() As String
@@ -303,7 +303,7 @@ Module EstCalc
   Friend Function SetCurrWaterjetting(sCurrMilling As String) As Boolean
      Dim nOperId As Integer = EgtGetFirstNameInGroup(EgtGetCurrMachGroup(), "Opers")
      If nOperId = GDB_ID.NULL Then Return False
-      Return EgtSetInfo(nOperId, INFO_CURRWATERJETTING, sCurrMilling)
+      Return EgtSetInfo(nOperId, INFO_CURRWATERJETTING, sCurrMilling, True)
   End Function

   Friend Function GetCurrWaterjetting() As String
@@ -92,11 +92,12 @@ Public Module SplitAuto
                  Mach.m_dStartFreeLen = FREELEN_INF + 1
                  Mach.m_dEndFreeLen = FREELEN_INF + 1
                  Dim nEntId, nSub As Integer
-                  If EgtGetMachiningGeometry( 0, nEntId, nSub) Then
-                     If EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse EgtGetType( nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
-                     EgtGetInfo( nEntId, If( Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
+                  If EgtGetMachiningGeometry(0, nEntId, nSub) Then
+                     ' EgtGetType( nEntId) = GDB_TY.CRV_ARC OrElse
+                     If EgtGetType(nEntId) = GDB_TY.CRV_COMPO Then Mach.m_bIsLine = False
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_PREVANG, INFO_NEXTANG), Mach.m_dPrevAng)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_NEXTANG, INFO_PREVANG), Mach.m_dNextAng)
+                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_START_FREELEN, INFO_END_FREELEN), Mach.m_dStartFreeLen)
                     EgtGetInfo(nEntId, If(Not Mach.m_bInvert, INFO_END_FREELEN, INFO_START_FREELEN), Mach.m_dEndFreeLen)
                     Mach.m_bEnableInvert = GetEnableInvert(nEntId)
                     EgtMidVector(nEntId, GDB_ID.ROOT, Mach.m_vtDir)
@@ -10,7 +10,22 @@ Module VacuumCups
   Private m_dPreferredRot As Double = 0
   Private m_dPrefVertRotXMinus As Double = 0
   Private m_dPrefVertRotXPlus As Double = 0
+   Private m_dPrefVertRotYMinus As Double = 0
+   Private m_dPrefVertRotYPlus As Double = 0
   Private m_dDripRefAng As Double = 0
+   ' dati carico massimo manipolatore
+   Private m_RawDensity As Double = 2500
+   Private m_RawWeight As Double = 0
+   Private m_MaxWeightSinglePlugger As Double = 250
+   Private m_MaxWeightDoublePlugger As Double = 750
+   Public bOverWeight As Boolean = False
+   ' dati per rotazione ventose vicono al fine corsa Y e X
+   Private bRotateVacuumNearExtraStrokeY As Boolean = False
+   Private bRotateVacuumNearExtraStrokeX As Boolean = False
+   ' dati stroke
+   Public bExtraStroke As Boolean = False
+   Public ptStartPointLift As Point3d
+   Public dDegRotStartAng As Double

   ' Nome del gruppo temporaneo per le ventose
   Private Const VACTMP_GRP As String = "VacTmp"
@@ -50,6 +65,20 @@ Module VacuumCups
      Return m_nVacType
   End Function

+   Friend Sub GetWeightInformation(Density As Double, MaxSingle As Double, MaxDouble As Double)
+      m_RawDensity = Density
+      m_MaxWeightSinglePlugger = MaxSingle
+      m_MaxWeightDoublePlugger = MaxDouble
+   End Sub
+
+   Friend Sub GetRotationForExtraStrokeY(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeY = Rotate
+   End Sub
+
+   Friend Sub GetRotationForExtraStrokeX(Rotate As Boolean)
+      bRotateVacuumNearExtraStrokeX = Rotate
+   End Sub
+
   Friend Function GetVacuumId() As Integer
      Return m_nVacId
   End Function
@@ -66,6 +95,8 @@ Module VacuumCups
      ' Identificativo riferimento della testa nella macchina
      Dim nT1Id As Integer = EgtGetFirstNameInGroup(EgtGetHeadId(VACUUM_HEAD), HEAD_FIRST_EXIT)
      If nT1Id = GDB_ID.NULL Then Return False
+      ' imposto la l'uscita della ventosa come fosse l'uscita di un utensile
+      EgtSetCalcTool("", "H4", 1)
      ' Creo gruppo temporaneo in cui copiarli
      m_nTempId = EgtCreateGroup(GDB_ID.ROOT)
      If m_nTempId = GDB_ID.NULL Then Return False
@@ -79,6 +110,8 @@ Module VacuumCups
      ' Angoli di rotazione preferiti per ventosa in verticale (lungo Y) a sinistra e a destra del centro tavola
      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYMINUS, m_dPrefVertRotYMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTYPLUS, m_dPrefVertRotYPlus)
      ' Direzione di riferimento per tagli Drip
      EgtGetInfo( m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
      ' Nascondo il gruppo ma rendo visibili le curve di contorno delle ventose
@@ -165,6 +198,18 @@ Module VacuumCups
      EgtGetBBoxGlob(nRKerfId, GDB_BB.STANDARD, b3Kerf)
      Dim ptKerfCen As Point3d
      EgtCentroid(nRKerfId, GDB_ID.ROOT, ptKerfCen)
+
+      '-------------------- INIZIO CALCOLO PESO --------------------
+      ' recupero l'area del grezzo da muovere
+      Dim RawArea As Double = 0
+      ' superficie del grezzo senza considerare eventuali fori
+      EgtSurfFrGrossArea(nRKerfId, RawArea)
+      ' volume calcolato in mmc
+      Dim RawVolume As Double = RawArea * b3Raw.DimZ()
+      ' peso calolato in kg
+      m_RawWeight = RawVolume * m_RawDensity / Math.Pow(10, 9)
+      '-------------------- FINE CALCOLO PESO --------------------
+
      ' Eseguo ricerca
      If FindVacuumCupsOnRaw(nRawId, ptRawCen, b3Kerf, ptKerfCen, nKerfId, nRKerfId, rmData) Then
         Return True
@@ -266,6 +311,7 @@ Module VacuumCups
         Dim sCups() As String = Nothing
         Dim sCups2() As String = Nothing
         If Not GetVacuumCupSelection(nI, sCups, sCups2) Then Return False
+         bExtraStroke = False
         ' Determino validità soluzioni della configurazione
         Dim vtMove As New Vector3d
         Dim ptRotCen As New Point3d
@@ -368,6 +414,23 @@ Module VacuumCups
      If b3Vac.IsEmpty() Then Return INFINITO
      ' Se box maggiore di quello del pezzo, scarto soluzione
      If b3Vac.Radius() > b3Raw.Radius() Then Return INFINITO
+      '-------------------- INIZIO VERIFICA PESO --------------------
+      bOverWeight = False
+      Select Case GetPluggerFromCameras(sCups)
+         Case 2
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightDoublePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+         Case 1
+            ' se peso del grezzo oltre il limite consentito allora scarto la soluzione
+            If m_RawWeight > m_MaxWeightSinglePlugger Then
+               bOverWeight = True
+               Return INFINITO
+            End If
+      End Select
+      '-------------------- FINE VERIFICA PESO --------------------
      ' Recupero l'area della tavola
      Dim b3Tab As New BBox3d
      EgtGetTableArea(1, b3Tab)
@@ -381,15 +444,22 @@ Module VacuumCups
         Dim dLen, dAngVertDeg, dAngOrizzDeg As Double
         frMinRect.VersX().ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
         dRotAngDeg = dAngOrizzDeg
-         If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
         Dim dPreferredRot As Double = m_dPreferredRot
-         If Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45 Then
+         If bRotateVacuumNearExtraStrokeX And Not IsHorizontal(dAngOrizzDeg) Then
            If frMinRect.Orig().x < b3Tab.Center().x Then
               dPreferredRot = m_dPrefVertRotXMinus
            Else
               dPreferredRot = m_dPrefVertRotXPlus
            End If
+         ElseIf bRotateVacuumNearExtraStrokeY And IsHorizontal(dAngOrizzDeg) Then
+            ' se l'orientemanto è orizzontale e la macchina è stata abilitata
+            If frMinRect.Orig().y < b3Tab.Center().y Then
+               dPreferredRot = m_dPrefVertRotYPlus
+            Else
+               dPreferredRot = m_dPrefVertRotYMinus
+            End If
         End If
+         If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
         Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
         While dRotAngDeg - dPreferredRot >= dAngDelta / 2
            dRotAngDeg -= dAngDelta
@@ -446,11 +516,71 @@ Module VacuumCups
      ' Applico movimento e rotazione al punto
      ptRef.Move(vtMove)
      ptRef.Rotate(ptRotCen, Vector3d.Z_AX(), dRotAngDeg)
+      ' -------------- INIZIO verifica di essere nel limite delle corse macchina --------------
+      If VerifyOutOfStrokes(ptRef, dRotAngDeg) <> 0 Then
+         bExtraStroke = True
+         Return INFINITO
+      End If
+      ' se la posizione è accettbaile allora salvo i dati
+      ptStartPointLift = ptRef
+      dDegRotStartAng = dRotAngDeg
+      ' -------------- FINE verifica di essere nel limite delle corse macchina --------------
      ' Ne calcolo la distanza dal centro della tavola
      Dim dDist As Double = Point3d.DistXY(ptRef, b3Tab.Center())
      Return dDist
   End Function

+   Private Function IsHorizontal(dDegAng As Double) As Boolean
+      If (Math.Abs(dDegAng) > 45 And Math.Abs(dDegAng) < 135) Or (Math.Abs(dDegAng) > 225 And Math.Abs(dDegAng) < 315) Then
+         Return False
+      End If
+      Return True
+   End Function
+
+   ' assegante le posizioni del centro delle ventose e l'angolo di posizionamento orizzontale verifica che la posizione sia raggiungibile
+   Public Function VerifyOutOfStrokes(ptRef As Point3d, dRotAngDeg As Double) As Integer
+      ' Posizione Home dell'asse rotante
+      Dim dCHome As Double
+      EgtGetAxisHomePos("C", dCHome)
+      ' Corse dell'asse
+      Dim dCMin As Double
+      EgtGetAxisMin("C", dCMin)
+      Dim dCMax As Double
+      EgtGetAxisMax("C", dCMax)
+      ' Porto l'angolo nel range
+      Dim dRotAngMachDeg As Double = dRotAngDeg + dCHome
+      AdjustAngleInRange(dRotAngMachDeg, dCMin, dCMax)
+      ' Imposto la ventosa come fosse un utensile
+      EgtSetCalcTool("", "H4", 1)
+      ' Calcolo gli assi macchina
+      Dim dX, dY, dZ As Double
+      Dim nStat As Integer
+      EgtGetCalcPositions(ptRef, dRotAngMachDeg, 0, nStat, dX, dY, dZ)
+      ' Verifico le corse
+      EgtVerifyOutstroke(dX, dY, dZ, dRotAngMachDeg, 0, nStat)
+      Return nStat
+   End Function
+
+   ' dall'informazione di extra corsa recupera il valore indicato
+   Public Function GetExtraStrokeValue(sInfo As String) As Double
+      Dim dExtraStroke As Double = 0
+      Dim sItems As String() = sInfo.Split("="c)
+      If sItems.Count = 2 Then
+         Dim nStartIndex As Integer = 0
+         For Each ItemChar As Char In sItems(1)
+            If ItemChar = "("c Then
+               Exit For
+            End If
+            nStartIndex += 1
+         Next
+         If nStartIndex > 0 Then
+            Dim sValue As String = sItems(1).Remove(nStartIndex, sItems(1).Count - nStartIndex)
+            StringToLen(sValue, dExtraStroke)
+         End If
+      End If
+      Return dExtraStroke
+   End Function
+
   Private Function TestVacuumCups(nCups() As Integer, nRawRegId As Integer,
                                   vtMove As Vector3d, ptRotCen As Point3d, dRotAngDeg As Double) As Boolean
      ' Eseguo verifica delle ventose rispetto al grezzo
@@ -471,6 +601,27 @@ Module VacuumCups
      Return bVacOk
   End Function

+   Private Function GetPluggerFromCameras(sCups() As String) As Integer
+      Dim nCountPlunger As Integer = 1
+      Dim bPlugger1 As Boolean = False
+      Dim bPlugger2 As Boolean = False
+      For Each Camera As String In sCups
+         If (Camera.Contains("1") Or Camera.Contains("2") Or Camera.Contains("3")) Then
+            bPlugger1 = True
+         Else
+            bPlugger2 = True
+         End If
+      Next
+      ' verifico quali sono le camere attive
+      If bPlugger1 And bPlugger2 Then
+         nCountPlunger = 2
+      ElseIf Not bPlugger1 And Not bPlugger2 Then
+         nCountPlunger = 0
+      End If
+      ' restituisco il numero di Plugger in uso
+      Return nCountPlunger
+   End Function
+
   Friend Function SaveOneMoveInfo(nId As Integer, rmData As RawMoveData) As Boolean
      ' Assegno le informazioni
      EgtSetInfo(nId, "Id", rmData.m_nId)
@@ -20,6 +20,7 @@
                       Margin="0,5,0,0"
                       Content="Verify"/>
         <ToggleButton Name="MagneticBtn" Height="40" Width="80"
+                       Visibility="Collapsed"
                       Margin="0,5,0,0"
                       Content="Magnetic"/>
         <Button Name="ExportBtn" Height="40" Width="80"
@@ -29,6 +29,13 @@ Public Class VeinMatchingWindow
   Private m_locPrev As System.Drawing.Point
   Private m_ptPrev As Point3d
   Private m_ptCen As Point3d
+   ' Gestione rotazione pezzi in fase di Drag
+   Private m_bKeyCtrlPressed As Boolean = False
+   Private m_bKeyLeftShiftPressed As Boolean = False
+   Private m_dAngTotal As Double = 0
+   Private m_dStartAng As Double = 0
+   Private m_bStartRot As Boolean = False
+   Private m_bStartMove As Boolean = False

   Private Sub Window_Initialized(sender As Object, e As EventArgs)
      ' Assegnazione scena all'host e posizionamento nella PlacePageGrid
@@ -984,7 +991,8 @@ Friend Module VeinMatching
      ' Esporto il file come immagine
      EgtSetCurrentContext(m_nVeinCtx)
      Dim bOk As Boolean = (EgtGetFileType(sFilePath) = FT.IMG)
-      bOk = bOk AndAlso EgtGetImage(EgtGetShowMode(), New Color3d(255, 255, 255), New Color3d(255, 255, 255),
+      bOk = bOk AndAlso EgtGetImage(DirectCast( EgtGetShowMode(), EgtInterface.SM),
+                                    New Color3d(255, 255, 255), New Color3d(255, 255, 255),
                                    m_nImgWidth, m_nImgHeight, sFilePath)
      ' Ripristino il contesto originale
      EgtSetCurrentContext(nMainCtx)
@@ -0,0 +1,14 @@
+<EgtFloating:EgtFloatingPanel x:Class="PrintPanelV"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtFloating="clr-namespace:EgtWPFLib5.EgtFloating;assembly=EgtWPFLib5"
+   IsTopDockable="True" IsBottomDockable="False" IsLeftDockable="False"
+   IsRightDockable="False" Style="{StaticResource ToolBar_EgtFloatingPanel}">
+
+   <Button ToolTip="{Binding PrintToolTip}"
+           Style="{StaticResource ToolBar_Button}"
+           Command="{Binding PrintCommand}">
+      <Image Source="/Resources/InstrumentPanel/Print.png" Stretch="Uniform"/>
+   </Button>
+
+</EgtFloating:EgtFloatingPanel>
@@ -0,0 +1,3 @@
+Public Class PrintPanelV
+
+End Class
@@ -0,0 +1,91 @@
+Imports EgtUILib
+Imports EgtWPFLib5
+Public Class PrintPanelVM
+
+   ' Definizione comandi
+   Private m_cmdPrint As ICommand
+
+   Public ReadOnly Property PrintToolTip As String
+      Get
+         ' "Print shading" & vbCrLf & "Print hidden line (Shift)"
+         Return "Print"
+      End Get
+   End Property
+
+#Region "PrintCommand"
+
+   Public ReadOnly Property PrintCommand As ICommand
+      Get
+         If m_cmdPrint Is Nothing Then
+            m_cmdPrint = New Command(AddressOf Print)
+         End If
+         Return m_cmdPrint
+      End Get
+   End Property
+
+   Public Sub Print(ByVal param As Object)
+      Dim SM_Select As SM = SM.SHADING
+
+      ' Imposto la stampa HiddenLine (non è gestita la stampa WireFrame)
+      'If (Keyboard.Modifiers And ModifierKeys.Shift) > 0 Then
+      '   SM_Select = SM.HIDDENLINE
+      '   EgtSetLineAttribs(3)
+      'End If
+
+      ' Gestione stampa in funzione del della visualizzazione corrente
+      If OmagOFFICEMap.refShowPanelVM.WireframeIsChecked Then
+         SM_Select = SM.WIREFRAME
+         EgtSetLineAttribs(3)
+      ElseIf OmagOFFICEMap.refShowPanelVM.HiddenLineIsChecked Then
+         SM_Select = SM.HIDDENLINE
+         EgtSetLineAttribs(3)
+      End If
+
+      Dim printDlg As New PrintDialog
+      Dim sPath = OmagOFFICEMap.refMainWindowVM.MainWindowM.sTempDir & "\Image.png"
+      If printDlg.ShowDialog() Then
+         ' Recupero le dimensioni dell'area di stampa
+         Dim dW As Double = printDlg.PrintableAreaWidth
+         Dim dH As Double = printDlg.PrintableAreaHeight
+         Try
+            ' Prendo l'immagine corrente per la stampa
+            Dim colWhite As New Color3d(255, 255, 255)
+            ' Recupero le dimensioni correnti della pagina di disegno
+            Dim nImgW As Integer = GetWidthDimProjectV()
+            Dim nImgH As Integer = GetHeightDimProjectV()
+            If Not EgtGetImage(SM_Select, colWhite, colWhite, nImgW, nImgH, sPath) Then
+               ' Error in creating the print image
+               EgtOutLog(EgtMsg(50181))
+               EgtSetLineAttribs(1)
+               Return
+            End If
+            EgtSetLineAttribs(1)
+            'Metodo complesso di stampa che permette di rilasciare il file :
+            'carico la bitmap e la metto in uno stream in memoria
+            Dim stream As System.IO.Stream = New System.IO.MemoryStream()
+            Dim bitmap As System.Drawing.Bitmap = New System.Drawing.Bitmap(sPath)
+            bitmap.Save(stream, System.Drawing.Imaging.ImageFormat.Png)
+            bitmap.Dispose()
+            ' la sposto in una BitmapImage
+            Dim bitImage As New System.Windows.Media.Imaging.BitmapImage()
+            bitImage.BeginInit()
+            bitImage.StreamSource = stream
+            bitImage.EndInit()
+            ' la sposto in un Visual Control
+            Dim tmpImg As New Image
+            tmpImg.BeginInit()
+            tmpImg.Source = bitImage
+            tmpImg.Stretch = Stretch.Uniform
+            tmpImg.EndInit()
+            ' eseguo la stampa
+            printDlg.PrintVisual(tmpImg, "Parts Layout")
+         Catch
+            ' Rrror in executing print
+            EgtOutLog(EgtMsg(50182))
+         End Try
+      End If
+   End Sub
+
+#End Region ' PrintCommand
+
+End Class
@@ -95,16 +95,19 @@ Public Class MyMachinePanelVM
      OmagOFFICEMap.SetRefMachinePanelVM(Me)
      ' recupero cartella radice delle macchine
      m_sMachinesRoot = OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot
-      ' Carica macchine da cartella delle macchine
-      Machine.MachineListInit(m_sMachinesRoot, MachineList)
-      ' Inizializzo valori visibilità parametri Db utensili e lavorazioni
-      OmagOFFICETMDbParamVisibility.Init()
   End Sub

 #End Region    ' CONSTRUCTOR

 #Region "METHODS"

+   Public Sub Init( sMchRoots As String)
+      ' procedo ad inizializzare la classe → carico la lista "MachineList" che visualizzo per l'inserimento di nuovi MachGroup
+      Machine.MachineListInit(sMchRoots, MachineList)
+      ' Inizializzo valori visibilità parametri Db utensili e lavorazioni
+      OmagOFFICETMDbParamVisibility.Init()
+   End Sub
+
   ''' <summary>
   ''' Execute the Exec.  This method is invoked by the ExecCommand.
   ''' </summary>
@@ -86,13 +86,29 @@ Public Class MainWindowM
         Return m_sTempDir
      End Get
   End Property
+
+   '------------------INIZIO Gestione elenco direttori macchine ------------------
+
+   Private m_sMachinesRootList As New List(Of String)
+   Friend ReadOnly Property sMachinesRootList As List(Of String)
+      Get
+         Return m_sMachinesRootList
+      End Get
+   End Property
+
+   '------------------FINE Gestione elenco direttori macchine ------------------
+
   Private m_sMachinesRoot As String
-   Friend ReadOnly Property sMachinesRoot As String
+   Friend Property sMachinesRoot As String
      Get
         Return m_sMachinesRoot
      End Get
+      Set(value As String)
+         m_sMachinesRoot = value
+      End Set
   End Property
   Private m_sToolMakersDir As String
+
   Friend ReadOnly Property sToolMakersDir As String
      Get
         Return m_sToolMakersDir
@@ -168,10 +184,20 @@ Public Class MainWindowM
      Directory.CreateDirectory(m_sBackUpDir)
      ' Impostazione path resources dir
      m_sResourcesRoot = m_sDataRoot & "\" & RES_DIR
-      ' Impostazione direttorio per le macchine
+      Dim nIndexDir As Integer = 1
+      Dim sCurrMachineDir As String = String.Empty
+      While GetMainPrivateProfileString(S_MACH, K_MACHINESDIR & nIndexDir.ToString, "", sCurrMachineDir) <> 0
+         If VerifyMachineIsUnique(sCurrMachineDir) Then
+            m_sMachinesRootList.Add(sCurrMachineDir)
+         End If
+         nIndexDir += 1
+      End While
+      ' Impostazione direttorio (versioni precedenti 2.4i2) per le macchine
      If GetMainPrivateProfileString(S_MACH, K_MACHINESDIR, "", m_sMachinesRoot) = 0 Then
         m_sMachinesRoot = m_sDataRoot & "\" & MACHINES_DFL_DIR
      End If
+      ' Carico il direttorio nell'elenco dei direttori macchina
+      If Not String.IsNullOrEmpty(m_sMachinesRoot) Then m_sMachinesRootList.Add(m_sMachinesRoot)
      ' Impostazione direttorio per toolmakers
      If GetMainPrivateProfileString(S_MACH, K_TOOLMAKERSDIR, "", m_sToolMakersDir) = 0 Then
         m_sToolMakersDir = m_sDataRoot & "\" & TOOLMAKERS_DFL_DIR
@@ -192,11 +218,13 @@ Public Class MainWindowM
      Dim sNestKey As String = ""
      EgtUILib.GetPrivateProfileString( S_LICENCE, K_NESTKEY, "", sNestKey, sLicFile)
      EgtSetNestKey( sNestKey)
+      Dim bNetHwKey As Boolean = ( GetMainPrivateProfileInt(S_GENERAL, K_NETKEY, 0) = 1)
+      EgtSetNetHwKey( bNetHwKey)
      ' Verifico abilitazione nesting automatico
      m_bAutoNestOption = Not String.IsNullOrWhiteSpace( sNestKey)
      ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2402, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2402, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2502, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2502, 1, m_nKeyOptions)
      ' Verifico abilitazione prodotto
      Dim bProd As Boolean = GetKeyOption(KEY_OPT.OFFICE_BASE)
      ' Inizializzazione generale di EgtInterface
@@ -267,12 +295,26 @@ Public Class MainWindowM
      EgtOutLog("KeyOptions : " & bKey.ToString() & " " & m_nKeyOptions.ToString() & " " & bProd.ToString())
      EgtPHOTOLib.MainData.SetConfigDir(m_sConfigDir)
      EgtPHOTOLib.MainData.SetKeyLevel(m_nKeyLevel)
-      EgtPHOTOLib.MainData.SetKeyOptions( CInt( m_nKeyOptions))
+      EgtPHOTOLib.MainData.SetKeyOptions(CInt(m_nKeyOptions))
      EgtPHOTOLib.MainData.SetPhotoDir(m_sPhotoDir)
      EgtPHOTOLib.MainData.SetBackUpDir(m_sBackUpDir)
      EgtPHOTOLib.MainData.SetIsOmagOFFICE(True)
+      EgtPHOTOLib.MainData.SetUser(Environment.MachineName & "\" & Environment.UserName & " (" & nInstance.ToString() & ")")
+      Dim sIdKey As String = String.Empty
+      EgtGetKeyInfo(sIdKey)
+      EgtPHOTOLib.MainData.SetKey(sIdKey)
   End Sub

+   ' verifico che il nome da inserire non esista già in elenco
+   Private Function VerifyMachineIsUnique(sMachDir As String) As Boolean
+      For Each sDir As String In m_sMachinesRootList
+         If String.Compare( sDir.Trim().TrimEnd("\"c), sMachDir.Trim().TrimEnd("\"c), True) = 0 Then
+            Return False
+         End If
+      Next
+      Return True
+   End Function
+
   Private Sub ManageInstance()
      Dim bCreated As Boolean
      Try
@@ -29,8 +29,8 @@ Imports System.Windows
 #End If
 #End If
 <Assembly: AssemblyCompany("Egalware s.r.l.")> 
-<Assembly: AssemblyProduct("OmagOFFICE")> 
-<Assembly: AssemblyCopyright("Copyright ©  2017-2022 by Egalware s.r.l.")> 
+<Assembly: AssemblyProduct("OmagOFFICE")>
+<Assembly: AssemblyCopyright("Copyright ©  2017-2023 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")> 
 <Assembly: ComVisible(false)>
 'In order to begin building localizable applications, set 
@@ -69,6 +69,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 

-<Assembly: AssemblyVersion("2.4.2.3")>
-<Assembly: AssemblyFileVersion("2.4.2.3")>
+<Assembly: AssemblyVersion("2.5.2.1")>
+<Assembly: AssemblyFileVersion("2.5.2.1")>

@@ -33,19 +33,22 @@ Public Class MyMachGroupPanelVM

   Sub New()
      MyBase.New()
-      ' Recupero la macchina di default
-      Dim sDefaultMachine As String = String.Empty
-      GetMainPrivateProfileString(S_MACH, K_CURRMACH, "", sDefaultMachine)
      ' Creo riferimento a questa classe in OmagOFFICEMap
      OmagOFFICEMap.SetRefMachGroupPanelVM(Me)
-      InitMachGroupPanel(True, OmagOFFICEMap.refMachinePanelVM.MachineList.ToList(),
-                     sDefaultMachine, BASE_MACH_GROUP & "1")
   End Sub

 #End Region    ' CONSTRUCTOR

 #Region "METHODS"

+   Public Sub Init()
+      ' Recupero la macchina di default
+      Dim sDefaultMachine As String = String.Empty
+      GetMainPrivateProfileString(S_MACH, K_CURRMACH, "", sDefaultMachine)
+      EgtSetCurrMachine(sDefaultMachine)
+      InitMachGroupPanel(True, OmagOFFICEMap.refMachinePanelVM.MachineList.ToList(), sDefaultMachine, BASE_MACH_GROUP & "1")
+   End Sub
+
   Public Overrides Sub AddMachGroup()
      If NewMachGroup() Then
         ' creo oggetto gruppo creato
@@ -71,7 +74,9 @@ Public Class MyMachGroupPanelVM
         Dim sMachine As String = String.Empty
         EgtGetMachGroupName(nId, sName)
         EgtGetMachGroupMachineName(nId, sMachine)
-         MachGroupList.Add(New MyMachGroup(nId, sName, sMachine, EgtGetFirstNameInGroup(nId, "Opers")))
+         Dim NewMyMachGoup As MyMachGroup = New MyMachGroup(nId, sName, sMachine, EgtGetFirstNameInGroup(nId, "Opers"))
+         NewMyMachGoup.IsValid = VerifyMachExists(sMachine)
+         MachGroupList.Add(NewMyMachGoup)
         If OmagOFFICEMap.refMainWindowVM.MainWindowM.m_SlabDB Then
            Dim sSlabNameDB As String = String.Empty
            EgtGetInfo(nId, INFO_SLABNAME, sSlabNameDB)
@@ -99,6 +104,8 @@ Public Class MyMachGroupPanelVM
      ' Salvo macchina del gruppo come nuovo default
      Dim sCurrMachName As String = String.Empty
      EgtGetCurrMachineName(sCurrMachName)
+      CurrentMachine.GetMachineClass(sCurrMachName)
+      OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot = Path.GetDirectoryName(OmagOFFICEMap.refMachinePanelVM.SelectedMachine.DirPath)
      WriteMainPrivateProfileString(S_MACH, K_CURRMACH, sCurrMachName)
      ' Ricarico la macchina corrente
      InitCurrentMachine(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, sCurrMachName,
@@ -111,7 +118,7 @@ Public Class MyMachGroupPanelVM
      Dim nTabInd As Integer = 1
      Dim nTabCnt As Integer = CamAuto.GetTableCount()
      If nTabCnt > 1 And nTabCnt <= 3 Then
-         Dim dlg As New SelectTableWindowV(Application.Current.MainWindow, New SelectTableWindowVM(nTabCnt))
+         Dim dlg As New SelectTableWindowV(Application.Current.MainWindow, New SelectTableWindowVM(DirectCast(nTabCnt, SelectTableWindowVM.TableNumOpt)))
         dlg.ShowDialog()
         nTabInd = dlg.m_SelTable
      End If
@@ -152,6 +159,9 @@ Public Class MyMachGroupPanelVM
   Public Overrides Function OnPostSetCurrMachGroup() As Boolean
      ' Imposto vista solo tavola
      EgtSetMachineLook(MCH_LOOK.TAB)
+      CurrentMachine.GetMachineClass(SelectedMachGroup.Machine)
+      If IsNothing(OmagOFFICEMap.refMachinePanelVM.SelectedMachine) Then Return False
+      OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot = Path.GetDirectoryName(OmagOFFICEMap.refMachinePanelVM.SelectedMachine.DirPath)
      ' Ricarico la macchina corrente
      InitCurrentMachine(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, SelectedMachGroup.Machine,
                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.PRODUCTION_LINE),
@@ -179,6 +189,10 @@ Public Class MyMachGroupPanelVM
      End If
      ' Verifico che gli utensili delle lavorazioni correnti siano attrezzati (necessario perchè potrei aver cambiato gli utensili delle lavorazioni)
      ' e che le lavorazioni correnti siano compatibili con materiale e spessore
+
+      ' Inizializzo l'elenco delle lavorazioni correnti
+      Dim CurrMachining As New CurrMachWindowVM
+
      ' Lama
      Dim bOkCurrSawing As Boolean = True
      Dim bOkCurrWaterjetting As Boolean = True
@@ -219,12 +233,13 @@ Public Class MyMachGroupPanelVM
      Else
         bOkCurrWaterjetting = False
      End If
-
+      ' Imposto il colore del pulsante SetUp 
      If Not bOkSetUp Then
         OmagOFFICEMap.refMachinePanelVM.SetUp_Background = Brushes.Red
      Else
         OmagOFFICEMap.refMachinePanelVM.SetUp_Background = DirectCast(New BrushConverter().ConvertFrom("#FFDDDDDD"), SolidColorBrush)
      End If
+      ' Imposto il colore di sfondo del pulsante SettingMachinig
      If Not bOkMatThick Or Not bOkCurrSawing Then
         If Not bOkMatThick Or Not bOkCurrWaterjetting Then
            OmagOFFICEMap.refOptionPanelVM.RawPart_Background = Brushes.Red
@@ -248,6 +263,10 @@ Public Class MyMachGroupPanelVM
      ' aggiungo alla lista delle lastre correnti/orig
      Dim sSlabNameDB As String = GetSlabName()
      LoadSlabsList(sSlabNameDB)
+
+      ' imposto la visibilità dei comandi per il waterjet
+      OmagOFFICEMap.refNestingTabVM.Set_WJ_Cmd_Visibility()
+
      Return True
   End Function

@@ -33,8 +33,15 @@ Public Class MySceneHostVM
         ' Recupero e imposto handle finestra principale
         Dim hMainWnd As IntPtr = New WindowInteropHelper(Application.Current.MainWindow).Handle
         EgtSetMainWindowHandle(hMainWnd)
+         ' Recupero l'elenco dei direttori radice macchina come stringa del tipo "..\Dir1\Example01|..\Dir2\|Example02"
+         Dim sMchRoots As String = GetMachineBaseDirs()
         ' inizializzo gestore lavorazioni
-         EgtInitMachMgr(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, OmagOFFICEMap.refMainWindowVM.MainWindowM.sToolMakersDir)
+         If Not EgtInitMachMgr(sMchRoots, OmagOFFICEMap.refMainWindowVM.MainWindowM.sToolMakersDir) Then
+            EgtOutLog("Error on loading machines roots: " & sMchRoots)
+         End If
+         ' inizializzo gestione più macchine
+         OmagOFFICEMap.refMachinePanelVM.Init(sMchRoots)
+         OmagOFFICEMap.refMachGroupPanelVM.Init()
         Return
      End If
      ' Problemi
@@ -157,6 +164,21 @@ Public Class MySceneHostVM
      MainScene.SetStatusNull()
   End Sub

+   Private Function GetMachineBaseDirs() As String
+      ' Trasformo l'elenco dei direttori radice macchina in una stringa del tipo "..\Dir1\Example01|..\Dir2\|Example02"
+      Dim sMchRoots As String = ""
+      ' Pulisco eventuali caratteri nascosti: origString.Replace(vbCr, "").Replace(vbLf, "")
+      For Each MachDir In OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRootList
+         MachDir = MachDir.Replace(vbCr, "").Replace(vbLf, "")
+         sMchRoots &= MachDir & "|"
+      Next
+      ' rimuovo dalla stringa l'ultimo carattere "|" inserito
+      sMchRoots = sMchRoots.Remove(sMchRoots.Length - 1, 1)
+      If String.IsNullOrEmpty(sMchRoots) Then sMchRoots = OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot
+      EgtOutLog("Machine root list: " & sMchRoots)
+      Return sMchRoots
+   End Function
+
 #End Region    ' METHODS

 #Region "ProjectManager"
@@ -223,6 +245,8 @@ Public Class MySceneHostVM
   End Sub

   Private Function ExecExport(sDirDest As String) As Boolean
+      ' salvo il nome della macchina correntemente selezionata
+      Dim CurrentSelectedMachGroup As String = OmagOFFICEMap.refMachGroupPanelVM.SelectedMachGroup.Machine
      ' Path completa del progetto corrente
      Dim sFilePath As String = String.Empty
      EgtGetCurrFilePath(sFilePath)
@@ -238,7 +262,9 @@ Public Class MySceneHostVM
      ' Creo un contesto separato con gestore lavorazioni per poter spezzettare il progetto
      Dim nCurrCtx As Integer = EgtGetCurrentContext()
      Dim nCtx As Integer = EgtInitContext()
-      EgtInitMachMgr(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, OmagOFFICEMap.refMainWindowVM.MainWindowM.sToolMakersDir)
+      ' Recupero l'elenco dei direttori radice macchina come stringa del tipo "..\Dir1\Example01|..\Dir2\|Example02"
+      Dim sMchRoots As String = GetMachineBaseDirs()
+      EgtInitMachMgr(sMchRoots, OmagOFFICEMap.refMainWindowVM.MainWindowM.sToolMakersDir)
      ' Per ogni gruppo di lavoro
      For Each nMchGrpId As Integer In vMchGrps
         ' Carico il progetto
@@ -282,10 +308,10 @@ Public Class MySceneHostVM
               File.Copy(sOriPath, sNewPath, True)
            Catch ex As Exception
               bOk = False
-               EgtOutLog( "Slab image not found :" & sOriPath)
+               EgtOutLog("Slab image not found :" & sOriPath)
            End Try
            EgtSetName(nPhotoId, PHOTO_NAME)
-            EgtChangePhotoCenterAsFlatScan( nPhotoId)
+            EgtChangePhotoCenterAsFlatScan(nPhotoId)
         End If
         ' Elimino gli altri gruppi di lavorazioni 
         For Each nMGrpId As Integer In vMchGrps
@@ -308,6 +334,27 @@ Public Class MySceneHostVM
         Dim nMarkId As Integer = EgtCreateGroup(GDB_ID.ROOT)
         EgtSetName(nMarkId, NAME_PROJMARK)
         EgtSetLevel(nMarkId, GDB_LV.SYSTEM)
+         ' Imposto la macchina: salvo l'altezza della sovratavola
+         Dim sMachine As String = String.Empty
+         EgtGetInfo(nMchGrpId, "Machine", sMachine)
+         If Not String.IsNullOrEmpty(sMachine) Then
+            CurrentMachine.GetMachineClass(sMachine)
+            OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot = Path.GetDirectoryName(OmagOFFICEMap.refMachinePanelVM.SelectedMachine.DirPath)
+            InitCurrentMachine(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, sMachine,
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.PRODUCTION_LINE),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_MILL),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_POLISHING),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_WJ),
+                         True)
+            Select Case GetCurrentTable()
+               Case 3
+                  EgtSetInfo(nMarkId, K_TAB3_ADDITIONALTABLE, CurrentMachine.dAdditionalTable)
+               Case 2
+                  EgtSetInfo(nMarkId, K_TAB2_ADDITIONALTABLE, CurrentMachine.dAdditionalTable)
+               Case Else
+                  EgtSetInfo(nMarkId, K_ADDITIONALTABLE, CurrentMachine.dAdditionalTable)
+            End Select
+         End If
         Dim nReducedCut As Integer = 1
         EgtGetInfo(nMchGrpId, INFO_REDUCEDCUT, nReducedCut)
         EgtSetInfo(nMarkId, INFO_REDUCEDCUT, nReducedCut)
@@ -326,6 +373,15 @@ Public Class MySceneHostVM
         ' Salvo il file
         If Not EgtSaveFile(sFileDest, NGE.CMPTEXT) Then bOk = False
      Next
+      CurrentMachine.GetMachineClass(CurrentSelectedMachGroup)
+      OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot = Path.GetDirectoryName(OmagOFFICEMap.refMachinePanelVM.SelectedMachine.DirPath)
+      ' reimposto la macchina corrente
+      InitCurrentMachine(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, CurrentSelectedMachGroup,
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.PRODUCTION_LINE),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_MILL),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_POLISHING),
+                         OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.ENABLE_WJ),
+                         True)
      ' Distruggo il contesto corrente e ripristino quello originale
      EgtSetCurrentContext(nCurrCtx)
      EgtDeleteContext(nCtx)
@@ -376,7 +432,9 @@ Public Class MySceneHostVM
      ' Creo un contesto separato con gestore lavorazioni per poter spezzettare il progetto
      Dim nCurrCtx As Integer = EgtGetCurrentContext()
      Dim nCtx As Integer = EgtInitContext()
-      EgtInitMachMgr(OmagOFFICEMap.refMainWindowVM.MainWindowM.sMachinesRoot, OmagOFFICEMap.refMainWindowVM.MainWindowM.sToolMakersDir)
+      ' Recupero l'elenco dei direttori radice macchina come stringa del tipo "..\Dir1\Example01|..\Dir2\|Example02"
+      Dim sMchRoots As String = GetMachineBaseDirs()
+      EgtInitMachMgr(sMchRoots, OmagOFFICEMap.refMainWindowVM.MainWindowM.sToolMakersDir)
      ' Per ogni gruppo di lavoro
      For Each nMchGrpId As Integer In vMchGrps
         ' Carico il progetto
@@ -769,6 +827,7 @@ Public Class MySceneHostVM
         Case OptionPanelVM.Tabs.NESTING
            OmagOFFICEMap.refNestingTabVM.OnKeyDownScene(sender, e)
         Case OptionPanelVM.Tabs.MACHINING
+            OmagOFFICEMap.refSplitModeVM.OnKeyDownScene(sender, e)
         Case OptionPanelVM.Tabs.SIMUL
      End Select
   End Sub
@@ -213,7 +213,11 @@
    <Compile Include="EgtStoneLib\VeinMatchingWindow.xaml.vb">
      <DependentUpon>VeinMatchingWindow.xaml</DependentUpon>
    </Compile>
+    <Compile Include="InstrumentPanel\PrintPanelV.xaml.vb">
+      <DependentUpon>PrintPanelV.xaml</DependentUpon>
+    </Compile>
    <Compile Include="InstrumentPanel\MyInstrumentPanelVM.vb" />
+    <Compile Include="InstrumentPanel\PrintPanelVM.vb" />
    <Compile Include="MachinePanel\MyMachinePanelVM.vb" />
    <Compile Include="MyMachGroupPanel\MyMachGroupPanelVM.vb" />
    <Compile Include="MachinePanel\MachinePanelV.xaml.vb">
@@ -247,6 +251,10 @@
    </Compile>
    <Compile Include="OptionPanel\MachiningTab\ModifStartEndCutWindowVM.vb" />
    <Compile Include="OptionPanel\MachiningTab\ModifStartEndWjWindowVM.vb" />
+    <Compile Include="OptionPanel\MachiningTab\ModifyQualityV.xaml.vb">
+      <DependentUpon>ModifyQualityV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="OptionPanel\MachiningTab\ModifyQualityVM.vb" />
    <Compile Include="OptionPanel\MachiningTab\MoveRawModeV.xaml.vb">
      <DependentUpon>MoveRawModeV.xaml</DependentUpon>
    </Compile>
@@ -389,6 +397,10 @@
      <Generator>MSBuild:Compile</Generator>
      <SubType>Designer</SubType>
    </Page>
+    <Page Include="InstrumentPanel\PrintPanelV.xaml">
+      <Generator>MSBuild:Compile</Generator>
+      <SubType>Designer</SubType>
+    </Page>
    <Page Include="MachinePanel\MachinePanelV.xaml">
      <SubType>Designer</SubType>
      <Generator>MSBuild:Compile</Generator>
@@ -433,6 +445,10 @@
      <Generator>MSBuild:Compile</Generator>
      <SubType>Designer</SubType>
    </Page>
+    <Page Include="OptionPanel\MachiningTab\ModifyQualityV.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
    <Page Include="OptionPanel\MachiningTab\MoveRawModeV.xaml">
      <SubType>Designer</SubType>
      <Generator>MSBuild:Compile</Generator>
@@ -691,6 +707,9 @@
  <ItemGroup>
    <Resource Include="Resources\TopCommandBar\DxfOut.png" />
  </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\InstrumentPanel\Print.png" />
+  </ItemGroup>
  <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
  <PropertyGroup>
    <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\OmagOFFICE\OmagOFFICER32.exe
@@ -7,20 +7,20 @@
      <Button Style="{StaticResource OptionPanel_Button}"
              Command="{Binding PrevCommand}"
              IsEnabled="{Binding PrevIsEnabled}"
-              Margin="0,0,2.5,0">
+              Margin="0,0,0,0">
         <Image Source="/Resources/MachiningTab/BackArrow.png"/>
      </Button>
      <Button Style="{StaticResource OptionPanel_Button}"
              Command="{Binding NextCommand}"
              IsEnabled="{Binding NextIsEnabled}"
-              Margin="0,0,2.5,0">
+              Margin="0,0,0,0">
         <Image Source="/Resources/MachiningTab/ForwardArrow.png"/>
      </Button>
      <Button Style="{StaticResource OptionPanel_Button}"
              Content="{Binding ModifyMsg}"
              Command="{Binding ModifyCommand}"
              IsEnabled="{Binding ModifyIsEnabled}"
-              Margin="0,0,2.5,0"/>
+              Margin="0,0,0,0"/>
      <Button Style="{StaticResource OptionPanel_Button}"
              Content="{Binding AutoMsg}"
              Command="{Binding AutoCommand}"
@@ -224,13 +224,17 @@ Public Class MachiningTabVM
   End Property

   Public Sub Prev(ByVal param As Object)
+      Dim bOk As Boolean = True
      ' Dichiaro solo visualizzazione
      m_bIsShow = True
      If m_MachiningMode = MachiningModeOpt.SPLIT Then
         OmagOFFICEMap.refSplitModeVM.ExitSplitRaw(False)
      Else
-         OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
+         ' verifico collisione dei pezzi in fase di scarico
+         bOk = OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
      End If
+      ' se trovata interferenza tra grezzi (dopo movimentazione) esco
+      If Not bOk Then Return
      ' Torno alla fase precedente
      EgtSetCurrPhase(EgtGetCurrPhase() - 1)
      ' Si va sempre in Split
@@ -255,19 +259,22 @@ Public Class MachiningTabVM
   End Property

   Public Sub NextCmd(ByVal param As Object)
+      Dim bOk As Boolean = True
      If m_MachiningMode = MachiningModeOpt.SPLIT Then
         OmagOFFICEMap.refSplitModeVM.ExitSplitRaw(False)
         MachiningMode = MachiningModeOpt.MOVERAWPART
         AutoVisibility = Visibility.Hidden
-         OmagOFFICEMap.refMoveRawModeVM.InitMoveRaw()
+         bOk = OmagOFFICEMap.refMoveRawModeVM.InitMoveRaw()
      Else
-         OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
+         ' se verificata una interferenza allora esco
+         bOk = OmagOFFICEMap.refMoveRawModeVM.ExitMoveRaw()
+         If Not bOk Then Return
         MachiningMode = MachiningModeOpt.SPLIT
         AutoVisibility = Visibility.Visible
         OmagOFFICEMap.refSplitModeVM.InitSplitRaw()
      End If
-      ' Aggiorno possibilità di uscire
-      ManageExit()
+      ' Se non ci sono interferenze tra i grezzi -> aggiorno possibilità di uscire
+      If bOk Then ManageExit()
   End Sub

 #End Region ' NextCommand
@@ -4,6 +4,7 @@
   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
   IsMinimizable="False"
   ShowInTaskbar="False"
+   Title="{Binding Title}"
   Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
   Height="200" Width="400"
   WindowStartupLocation="CenterOwner">
@@ -3,6 +3,15 @@ Imports EgtUILib

 Public Class ModifStartEndCutWindowVM

+   Private m_Title As String = String.Empty
+   Public Property Title As String
+      Get
+         Return m_Title
+      End Get
+      Set(value As String)
+         m_Title = value
+      End Set
+   End Property
   Public ReadOnly Property ValueMsg As String
      Get
         Return EgtMsg(MSG_SPLITPAGEUC + 35)
@@ -4,6 +4,7 @@
   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
   IsMinimizable="False"
   ShowInTaskbar="False"
+   Title="{Binding Title}"
   Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
   Height="400" Width="400"
   WindowStartupLocation="CenterOwner">
@@ -6,6 +6,15 @@ Imports EgtWPFLib5
 Public Class ModifStartEndWjWindowVM
   Inherits VMBase

+   Private m_Title As String = String.Empty
+   Public Property Title As String
+      Get
+         Return m_Title
+      End Get
+      Set(value As String)
+         m_Title = value
+      End Set
+   End Property
   Public ReadOnly Property ValueMsg As String
      Get
         Return EgtMsg(MSG_SPLITPAGEUC + 35)
@@ -0,0 +1,53 @@
+<EgtWPFLib5:EgtCustomWindow x:Class="ModifyQualityV"
+        xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+   IsMinimizable="False"
+   ShowInTaskbar="False"
+   Title="{Binding Title}"
+   Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
+   Height="200" Width="400"
+   WindowStartupLocation="CenterOwner">
+
+   <Grid>
+      <Grid.ColumnDefinitions>
+         <ColumnDefinition Width="0.5*"/>
+         <ColumnDefinition Width="4*"/>
+         <ColumnDefinition Width="4*"/>
+         <ColumnDefinition Width="0.5*"/>
+      </Grid.ColumnDefinitions>
+      <Grid.RowDefinitions>
+         <RowDefinition Height="0.5*"/>
+         <RowDefinition Height="0.5*"/>
+         <RowDefinition Height="0.5*"/>
+         <RowDefinition Height="1*"/>
+         <RowDefinition Height="0.5*"/>
+      </Grid.RowDefinitions>
+
+      <TextBlock Grid.Column="1" Grid.Row="1" Margin="0,5,0,0"
+                        Style="{StaticResource OptionTextBlock}" Text="{Binding ValueMsg}"/>
+      <ComboBox ItemsSource="{Binding QualityList}"
+                SelectedItem="{Binding SelectedQuality}"
+                Grid.Column="2" Grid.Row="1" Margin="10,5,10,0"/>
+
+      <Grid Name="ButtonsGrid" Grid.Column="1" Grid.Row="3" Grid.RowSpan="1" Grid.ColumnSpan="2">
+         <Grid.ColumnDefinitions>
+            <ColumnDefinition Width="0.5*"/>
+            <ColumnDefinition Width="2*"/>
+            <ColumnDefinition Width="0.5*"/>
+            <ColumnDefinition Width="2*"/>
+            <ColumnDefinition Width="0.5*"/>
+         </Grid.ColumnDefinitions>
+
+         <Button Name="OkBtn" Content="{Binding OkMsg}" Grid.Column="1"
+                 Style="{DynamicResource ToolBar_TextButton}">
+         </Button>
+         <Button Content="{Binding ExitMsg}" Grid.Column="3"
+                    IsCancel="True"
+                    Style="{DynamicResource ToolBar_TextButton}">
+         </Button>
+
+      </Grid>
+
+   </Grid>
+</EgtWPFLib5:EgtCustomWindow>
@@ -0,0 +1,6 @@
+Public Class ModifyQualityV
+
+   Private Sub OkBtn_Click(sender As Object, e As RoutedEventArgs) Handles OkBtn.Click
+      DialogResult = True
+   End Sub
+End Class
@@ -0,0 +1,61 @@
+Imports System.Collections.ObjectModel
+Imports System.IO
+Imports EgtUILib
+Imports EgtWPFLib5
+Public Class ModifyQualityVM
+   Inherits VMBase
+
+   Private m_Title As String = String.Empty
+   Public Property Title As String
+      Get
+         Return m_Title
+      End Get
+      Set(value As String)
+         m_Title = value
+      End Set
+   End Property
+   Public ReadOnly Property ValueMsg As String
+      Get
+         Return EgtMsg(MSG_SPLITPAGEUC + 35)
+      End Get
+   End Property
+
+   Public ReadOnly Property OkMsg As String
+      Get
+         Return EgtMsg(91651)          'Ok
+      End Get
+   End Property
+
+   Public ReadOnly Property ExitMsg As String
+      Get
+         Return EgtMsg(91652)          'Annulla
+      End Get
+   End Property
+
+   Private m_QualityList As New ObservableCollection(Of String)
+
+   Public Property QualityList As ObservableCollection(Of String)
+      Get
+         Return m_QualityList
+      End Get
+      Set(value As ObservableCollection(Of String))
+         m_QualityList = value
+      End Set
+   End Property
+
+   Private m_SelectedQuality As String
+
+   Public Property SelectedQuality As String
+      Get
+         Return m_SelectedQuality
+      End Get
+      Set(value As String)
+         m_SelectedQuality = value
+      End Set
+   End Property
+
+   Sub New()
+
+   End Sub
+
+End Class
@@ -17,6 +17,7 @@ Public Class MoveRawModeVM
   Private m_bRemovedRaw As Boolean = False                 ' flag per rimozione manuale pezzi
   Private m_RawMoveDataList As New List(Of RawMoveData)    ' dati di movimento
   Private m_bRawWithCups As Boolean = False                ' flag per pezzo corrente con ventose
+   Private m_CurrRawOnVacuum As Integer = GDB_ID.NULL       ' identificativo pezzo correntemente attaccato alle ventose

   Private m_dMoveStep As Double
   Public Property MoveStep As String
@@ -108,6 +109,17 @@ Public Class MoveRawModeVM
 #Region "METHODS"

   Friend Function InitMoveRaw() As Boolean
+      '' verifico che il pezzo sia depositabile
+      'If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+      '   ' mantengo la selezione del pezzo
+      '   EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+      '   OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+      '   EgtDraw()
+      '   ' non cambio pagina
+      '   Return False
+      'End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
      ' Deseleziono tutto
      EgtDeselectAll()
      ' Recupero i tagli allungati prima definiti
@@ -158,14 +170,14 @@ Public Class MoveRawModeVM
               ' Distanza iniziale
               m_dCurrDist = 0
            End If
-         ' Non dovrebbe mai accadere, ma inizializzo con default
+            ' Non dovrebbe mai accadere, ma inizializzo con default
         Else
            m_vtDir = Vector3d.Y_AX()
            m_ptMid = Point3d.ORIG()
            m_dOrigDist = 0
            m_dCurrDist = 0
         End If
-      ' Altrimenti movimento con ventose
+         ' Altrimenti movimento con ventose
      Else
         m_bRemovedRaw = False
         m_bRawWithCups = False
@@ -182,7 +194,7 @@ Public Class MoveRawModeVM
      If OmagOFFICEMap.refMachiningTabVM.ByHand Then
         LRArrowVisibility = Visibility.Hidden
         RotationVisibility = Visibility.Hidden
-      ' Altrimenti per movimento con ventose
+         ' Altrimenti per movimento con ventose
      Else
         LRArrowVisibility = Visibility.Visible
         RotationVisibility = If(CurrentMachine.bRawSplMovRotate, Visibility.Visible, Visibility.Hidden)
@@ -195,6 +207,17 @@ Public Class MoveRawModeVM
   End Function

   Friend Function ExitMoveRaw() As Boolean
+      ' verifico che il pezzo sia depositabile
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+         EgtDraw()
+         ' non cambio pagina
+         Return False
+      End If
+      ' resetto l'inidice del pezzo da mnovimentare
+      m_CurrRawOnVacuum = GDB_ID.NULL
      ' Deseleziono tutto
      EgtDeselectAll()
      ' Se movimento con ventose
@@ -249,6 +272,141 @@ Public Class MoveRawModeVM
      NotifyPropertyChanged("MoveStep")
   End Sub

+   ' verifica che la posizione di rialascio sia corretta, altrimenti coreggo il vettore di posizione
+   Private Function VerifyReleasdPositionIsValid(ByRef vtMove As Vector3d) As Boolean
+      Dim bOk As Boolean = True
+      ' determino il punto finale dello spostamento
+      Dim ptEndPointLift As Point3d = VacuumCups.ptStartPointLift
+      ptEndPointLift.x += vtMove.x
+      ptEndPointLift.y += vtMove.y
+      Dim sInfo As String = String.Empty
+      Select Case VacuumCups.VerifyOutOfStrokes(ptEndPointLift, VacuumCups.dDegRotStartAng)
+         Case 1
+            ' extra corsa sulla x-: devo ridurre del valore di extra corsa
+            EgtGetOutstrokeInfo(sInfo)
+            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, 3, MSG_TYPE.WARNING)       'Extracorsa ...
+            ptEndPointLift.x -= vtMove.x
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.x) <= EPS_SMALL * 100 Then
+               vtMove.x = 0
+            Else
+               vtMove.x -= dMaxMove - EPS_SMALL * 100
+            End If
+            ptEndPointLift.x += vtMove.x
+            bOk = False
+         Case 2
+            ' extra corsa sulla x+: devo ridurre del valore di extra corsa
+            EgtGetOutstrokeInfo(sInfo)
+            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, 3, MSG_TYPE.WARNING)       'Extracorsa ...
+            ptEndPointLift.x -= vtMove.x
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.x) <= EPS_SMALL * 100 Then
+               vtMove.x = 0
+            Else
+               vtMove.x -= dMaxMove + EPS_SMALL * 100
+            End If
+            ptEndPointLift.x += vtMove.x
+            bOk = False
+         Case 4
+            ' extra corsa sulla y-
+            EgtGetOutstrokeInfo(sInfo)
+            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, 3, MSG_TYPE.WARNING)       'Extracorsa ...
+            ptEndPointLift.y -= vtMove.y
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.y) <= EPS_SMALL * 100 Then
+               vtMove.y = 0
+            Else
+               vtMove.y -= dMaxMove - EPS_SMALL * 100
+            End If
+            ptEndPointLift.y += vtMove.y
+            bOk = False
+         Case 8
+            ' extra corsa sulla y+
+            EgtGetOutstrokeInfo(sInfo)
+            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, 3, MSG_TYPE.WARNING)       'Extracorsa ...
+            ptEndPointLift.y -= vtMove.y
+            Dim dMaxMove As Double = VacuumCups.GetExtraStrokeValue(sInfo)
+            If Math.Abs(dMaxMove - vtMove.y) <= EPS_SMALL * 100 Then
+               vtMove.y = 0
+            Else
+               vtMove.y -= dMaxMove + EPS_SMALL * 100
+            End If
+            ptEndPointLift.y += vtMove.y
+            bOk = False
+      End Select
+      ' il movimento del pezzo è accettabile, aggiorno le posizione per la verifica dello step successivo
+      VacuumCups.ptStartPointLift = ptEndPointLift
+      Return bOk
+   End Function
+   ' verifica che la posizione di rialascio sia corretta, altrimenti coreggo l'angolo di posizione
+   Private Function VerifyReleasdAngleIsValid(ByRef dAngDeg As Double, ByVal ptCenter As Point3d) As Boolean
+      Dim bOk As Boolean = True
+      ' determino il punto finale dello spostamento
+      Dim ptEndPointLift As Point3d = VacuumCups.ptStartPointLift
+      Dim dDegRotEndAng As Double = VacuumCups.dDegRotStartAng + dAngDeg
+      ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+      Dim sInfo As String = String.Empty
+      Select Case VacuumCups.VerifyOutOfStrokes(ptEndPointLift, dDegRotEndAng)
+         Case 16
+            ' extra corsa sulla c-
+            EgtGetOutstrokeInfo(sInfo)
+            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, 3, MSG_TYPE.WARNING)       'Extracorsa ...
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), -dAngDeg)
+            dDegRotEndAng -= dAngDeg
+            dAngDeg += VacuumCups.GetExtraStrokeValue(sInfo) + EPS_SMALL
+            dDegRotEndAng += dAngDeg
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+            bOk = False
+         Case 34
+            ' extra corsa sulla c+
+            EgtGetOutstrokeInfo(sInfo)
+            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_SIMULATIONPAGEUC + 2) & " " & sInfo, 3, MSG_TYPE.WARNING)       'Extracorsa ...
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), -dAngDeg)
+            dDegRotEndAng -= dAngDeg
+            dAngDeg -= VacuumCups.GetExtraStrokeValue(sInfo) + EPS_SMALL
+            dDegRotEndAng += dAngDeg
+            ptEndPointLift.Rotate(ptCenter, Vector3d.Z_AX(), dAngDeg)
+            bOk = False
+      End Select
+      ' il movimento del pezzo è accettabile, aggiorno le posizione per la verifica dello step successivo
+      VacuumCups.ptStartPointLift = ptEndPointLift
+      VacuumCups.dDegRotStartAng = dDegRotEndAng
+      Return bOk
+   End Function
+
+   ' Veririfica che il grezzo non entri in colliosione con altri pezzi 
+   Private Function VerifyCollisionWithOtherRawPart(nIdOnVacumm As Integer) As Boolean
+      If nIdOnVacumm = GDB_ID.NULL Then Return False
+      ' Creo gruppo temporaneo in cui generare le superfici per la veririfica di collisione
+      Dim m_nTempId As Integer = EgtCreateGroup(GDB_ID.ROOT)
+      If m_nTempId = GDB_ID.NULL Then Return False
+      EgtSetName(m_nTempId, "RawTemp")
+      Dim nIdActualRawOutLine As Integer = EgtGetFirstNameInGroup(nIdOnVacumm, "RawOutline")
+      Dim ActualRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdActualRawOutLine)
+      Dim nCurrPhase As Integer = EgtGetCurrPhase()
+      Dim nRawGroupId = EgtGetParent(EgtGetFirstRawPart())
+      Dim nIdRaw As Integer = EgtGetFirstRawPart()
+      ' ciclo su tutti i grezzi per veririficare eventuali collisioni
+      While nIdRaw <> GDB_ID.NULL
+         ' verifico la fase del grezzo
+         If EgtVerifyRawPartCurrPhase(nIdRaw) And nIdOnVacumm <> nIdRaw Then
+            ' recupero il contorno del pezzo
+            Dim nIdRawOutLine As Integer = EgtGetFirstNameInGroup(nIdRaw, "RawOutline")
+            Dim nIdRawFlatRegion As Integer = EgtCreateSurfFlatRegion(m_nTempId, nIdRawOutLine)
+            If EgtSurfFrIntersect(nIdRawFlatRegion, ActualRawFlatRegion) Then
+               If EgtExistsObj(nIdRawFlatRegion) Then
+                  EgtErase(m_nTempId)
+                  ' esiste una intersezione delle superfici
+                  Return True
+               End If
+            End If
+         End If
+         nIdRaw = EgtGetNextRawPart(nIdRaw)
+      End While
+      EgtErase(m_nTempId)
+      Return False
+   End Function
+
 #End Region    ' METHODS

 #Region "COMMANDS"
@@ -286,9 +444,15 @@ Public Class MoveRawModeVM
         Else
            If m_bRawWithCups Then
               Dim vtMove As New Vector3d(0, m_dMoveStep, 0)
+               ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+               OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+               VerifyReleasdPositionIsValid(vtMove)
+               ' ----------- FINE verifica di essere entro i limiti macchina -----------
               If EgtMoveRawPart(nRawId, vtMove) Then
                  EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                  AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+               Else
+                  VacuumCups.ptStartPointLift.y -= vtMove.y
               End If
            Else
               ' Pezzo troppo piccolo : non si può muovere
@@ -320,9 +484,15 @@ Public Class MoveRawModeVM
      While nRawId <> GDB_ID.NULL
         If m_bRawWithCups Then
            Dim vtMove As New Vector3d(-m_dMoveStep, 0, 0)
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+            VerifyReleasdPositionIsValid(vtMove)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
            If EgtMoveRawPart(nRawId, vtMove) Then
               EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
               AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.x -= vtMove.x
            End If
         Else
            ' Pezzo troppo piccolo : non si può muovere
@@ -353,9 +523,15 @@ Public Class MoveRawModeVM
      While nRawId <> GDB_ID.NULL
         If m_bRawWithCups Then
            Dim vtMove As New Vector3d(m_dMoveStep, 0, 0)
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+            VerifyReleasdPositionIsValid(vtMove)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
            If EgtMoveRawPart(nRawId, vtMove) Then
               EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
               AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.x -= vtMove.x
            End If
         Else
            ' Pezzo troppo piccolo : non si può muovere
@@ -403,9 +579,15 @@ Public Class MoveRawModeVM
         Else
            If m_bRawWithCups Then
               Dim vtMove As New Vector3d(0, -m_dMoveStep, 0)
+               ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+               OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+               VerifyReleasdPositionIsValid(vtMove)
+               ' ----------- FINE verifica di essere entro i limiti macchina -----------
               If EgtMoveRawPart(nRawId, vtMove) Then
                  EgtMove(GetVacuumId(), vtMove, GDB_RT.GLOB)
                  AddRawMoveData(nRawId, vtMove, m_RawMoveDataList)
+               Else
+                  VacuumCups.ptStartPointLift.y -= vtMove.y
               End If
            Else
               ' Pezzo troppo piccolo : non si può muovere
@@ -437,12 +619,19 @@ Public Class MoveRawModeVM
      While nRawId <> GDB_ID.NULL
         If m_bRawWithCups Then
            Dim dAng As Double = m_dRotationStep
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            ' Recupero il centro del grezzo
+            Dim ptRawCen As Point3d
+            EgtGetRawPartCenter(nRawId, ptRawCen)
+            OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+            VerifyReleasdAngleIsValid(dAng, ptRawCen)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
            If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAng) Then
-               ' Recupero il centro del grezzo
-               Dim ptRawCen As Point3d
-               EgtGetRawPartCenter(nRawId, ptRawCen)
               EgtRotate(GetVacuumId(), ptRawCen, Vector3d.Z_AX(), dAng, GDB_RT.GLOB)
               AddRawMoveData(nRawId, dAng, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.Rotate(ptRawCen, Vector3d.Z_AX(), dAng)
+               VacuumCups.dDegRotStartAng -= dAng
            End If
         Else
            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2), 3, MSG_TYPE.WARNING)
@@ -472,12 +661,19 @@ Public Class MoveRawModeVM
      While nRawId <> GDB_ID.NULL
         If m_bRawWithCups Then
            Dim dAng As Double = -m_dRotationStep
+            ' ----------- INIZIO verifica di essere entro i limiti macchina -----------
+            ' Recupero il centro del grezzo
+            Dim ptRawCen As Point3d
+            EgtGetRawPartCenter(nRawId, ptRawCen)
+            OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
+            VerifyReleasdAngleIsValid(dAng, ptRawCen)
+            ' ----------- FINE verifica di essere entro i limiti macchina -----------
            If EgtRotateRawPart(nRawId, Vector3d.Z_AX(), dAng) Then
-               ' Recupero il centro del grezzo
-               Dim ptRawCen As Point3d
-               EgtGetRawPartCenter(nRawId, ptRawCen)
               EgtRotate(GetVacuumId(), ptRawCen, Vector3d.Z_AX(), dAng, GDB_RT.GLOB)
               AddRawMoveData(nRawId, dAng, m_RawMoveDataList)
+            Else
+               VacuumCups.ptStartPointLift.Rotate(ptRawCen, Vector3d.Z_AX(), dAng)
+               VacuumCups.dDegRotStartAng -= dAng
            End If
         Else
            OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2), 3, MSG_TYPE.WARNING)
@@ -545,17 +741,49 @@ Public Class MoveRawModeVM
         ' Se trovato il grezzo
         If nParentId = nRawGroupId Then
            Dim nStat As Integer = GDB_ST.ON_
+            ' Se il pezzo corrente è selezionato allora lo disattivo -> deposito del pezzo
            EgtGetStatus(nId, nStat)
            If nStat = GDB_ST.SEL Then
               EgtSetStatus(nId, GDB_ST.ON_)
-               ' Se con ventose, le nascondo
-               If Not OmagOFFICEMap.refMachiningTabVM.ByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               ' prima di rilasciare il pezzo verifico che non vada in collisione con altri pezzi sulla tavola
+               If VerifyCollisionWithOtherRawPart(nId) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(nId, GDB_ST.SEL)
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+               Else
+                  ' Se con ventose, le nascondo
+                  If Not OmagOFFICEMap.refMachiningTabVM.ByHand Then EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
+               End If
+
            Else
+
+               ' verifico che il pezzo precedente possa essere depositato correttamente
+               If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+                  ' mantengo la selezione del pezzo
+                  EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+                  OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+                  EgtDraw()
+                  ' esco dal ciclo, prima devo depositare correttamente il pezzo
+                  Exit While
+               End If
+               ' salvo l'indice del pezzo correntemente attaccato alle ventose
+               m_CurrRawOnVacuum = nId
+
               EgtDeselectAll()
               EgtSetStatus(nId, GDB_ST.SEL)
               ' Se con ventose, le posiziono sul grezzo
               If Not OmagOFFICEMap.refMachiningTabVM.ByHand Then
                  Dim rmData As New RawMoveData
+                  ' inizializzo i dati del grezzo per il cacolo del peso
+                  Dim MaxSinglePlugger As Double = 250
+                  MaxSinglePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_SINGLEPLUGGER, MaxSinglePlugger, sMachIniFile)
+                  Dim MaxDoublePlugger As Double = 750
+                  MaxDoublePlugger = GetPrivateProfileDouble(S_MACH_RAWMOVE, K_MACH_WEIGHT_DOUBLEPLUGGER, MaxDoublePlugger, sMachIniFile)
+                  Dim AverageDensity As Double = 2700
+                  AverageDensity = GetPrivateProfileDouble(S_MATERIALS, K_AVERAGEDENSITY, AverageDensity, sMachIniFile)
+                  VacuumCups.GetWeightInformation(AverageDensity, MaxSinglePlugger, MaxDoublePlugger)
+                  VacuumCups.GetRotationForExtraStrokeY(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEY, 0, sMachIniFile) <> 0)
+                  VacuumCups.GetRotationForExtraStrokeX(GetPrivateProfileInt(S_MACH_RAWMOVE, K_MACH_ROTATEVACUUMFOREXTRASTROKEX, 0, sMachIniFile) <> 0)
                  If PutVacuumCupsOnRaw(nId, rmData) Then
                     ' Visualizzo le ventose
                     EgtSetStatus(GetVacuumId(), GDB_ST.ON_)
@@ -565,10 +793,19 @@ Public Class MoveRawModeVM
                     ' Reset eventuale messaggio
                     OmagOFFICEMap.refStatusBarVM.ClearOutputMessage()
                  Else
+                     ' Visualizzo le ventose
+                     EgtSetStatus(GetVacuumId(), GDB_ST.OFF)
                     ' Aggiorno i dati
                     m_bRawWithCups = False
-                     ' Messaggio di avvertimento (Pezzo troppo piccolo : non si può muovere)
-                     OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2), 3, MSG_TYPE.WARNING)
+                     If VacuumCups.bOverWeight Then
+                        ' Messaggio di avvertimento (Pezzo troppo piccolo : non si può muovere)
+                        OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_MOVERAWPAGEUC + 4), 3, MSG_TYPE.WARNING)
+                     ElseIf VacuumCups.bExtraStroke Then
+                        OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_MOVERAWPAGEUC + 5), 3, MSG_TYPE.WARNING) 'Pezzo oltre le corse : non si può muovere
+                     Else
+                        ' Messaggio di avvertimento (Pezzo troppo piccolo : non si può muovere)
+                        OmagOFFICEMap.refStatusBarVM.SetOutputMessage(EgtMsg(MSG_MOVERAWPAGEUC + 2), 3, MSG_TYPE.WARNING)
+                     End If
                  End If
               End If
            End If
@@ -577,6 +814,15 @@ Public Class MoveRawModeVM
         End If
         nId = EgtGetNextObjInSelWin()
      End While
+
+      ' clicco su un oggetto che non è un grezzo -> verifico che il pezzo precedente possa essere depositato correttamente
+      If VerifyCollisionWithOtherRawPart(m_CurrRawOnVacuum) Then
+         ' mantengo la selezione del pezzo
+         EgtSetStatus(m_CurrRawOnVacuum, GDB_ST.SEL)
+         OmagOFFICEMap.refStatusBarVM.SetOutputMessage("Collisione pezzi", 3, MSG_TYPE.ERROR_)
+         EgtDraw()
+      End If
+
   End Sub

 #End Region    ' EVENTS
@@ -7,17 +7,17 @@
      <ListBox ItemsSource="{Binding ItemList}"
               DisplayMemberPath="Name"
               SelectionMode="Extended"
-               Height="250" Margin="0,0,0,5">
-          <ListBox.ItemContainerStyle>
-              <Style TargetType="ListBoxItem">
-                  <Style.Triggers>
-                      <DataTrigger Binding="{Binding bIsActive}" Value="False">
-                          <Setter Property="Foreground" Value="{StaticResource Omag_Gray}"/>
-                      </DataTrigger>
-                  </Style.Triggers>
-                  <Setter Property="IsSelected" Value="{Binding IsSelected, Mode=TwoWay}" />
-              </Style>
-          </ListBox.ItemContainerStyle>
+               Height="200" Margin="0,0,0,5">
+         <ListBox.ItemContainerStyle>
+            <Style TargetType="ListBoxItem">
+               <Style.Triggers>
+                  <DataTrigger Binding="{Binding bIsActive}" Value="False">
+                     <Setter Property="Foreground" Value="{StaticResource Omag_Gray}"/>
+                  </DataTrigger>
+               </Style.Triggers>
+               <Setter Property="IsSelected" Value="{Binding IsSelected, Mode=TwoWay}" />
+            </Style>
+         </ListBox.ItemContainerStyle>
      </ListBox>

      <Grid Margin="0,0,0,5">
@@ -29,11 +29,13 @@
         </Grid.ColumnDefinitions>

         <Button Grid.Column="1"
+                 IsEnabled="{Binding bEnabledCommandMove}"
                 Style="{StaticResource OptionPanel_Button}"
                 Command="{Binding MoveUpCommand}">
            <Image Source="/Resources/MachiningTab/UpArrow.png"/>
         </Button>
         <Button Grid.Column="2"
+                 IsEnabled="{Binding bEnabledCommandMove}"
                 Style="{StaticResource OptionPanel_Button}"
                 Command="{Binding MoveDownCommand}">
            <Image Source="/Resources/MachiningTab/DownArrow.png"/>
@@ -42,7 +44,7 @@
      </Grid>

      <Border Margin="0,0,0,5" Style="{StaticResource Border}">
-         
+
         <UniformGrid Columns="3">

            <Button Content="{Binding OnOffMsg}"
@@ -63,27 +65,50 @@
      </Border>

      <Border Margin="0,0,0,5" Style="{StaticResource Border}">
-         
-         <StackPanel>
-            
-            <UniformGrid Columns="3" Margin="0,0,0,5">

-               <Button Content="{Binding CutMsg}"
-                       Style="{StaticResource OptionPanel_TextWrapButton}"
-                       Command="{Binding CutCommand}"
-                       Visibility="{Binding CutBtnVisibility}"
-                       Margin="0,0,2.5,0"/>
-               <Button Content="{Binding CutStartMsg}"
+         <StackPanel>
+
+            <UniformGrid Columns="3" Margin="0,0,0,5">
+               <Grid>
+                  <Button Content="{Binding CutMsg}"
+                           Style="{StaticResource OptionPanel_TextWrapButton}"
+                           Command="{Binding CutCommand}"
+                           Visibility="{Binding CutBtnVisibility}"
+                           Margin="0,0,2.5,0"/>
+                  <ToggleButton Grid.Row="0"
+                           Content="{Binding BridgeMsg}"           
+                           Style="{StaticResource OptionPanel_ToggleWrapButton}"
+                           IsChecked="{Binding BridgeBtn_IsChecked}"
+                           Visibility="{Binding BridgeBtnVisibility}"
+                           Margin="0,0,2.5,0" Padding="0"/>
+               </Grid>
+
+               <Grid>
+                  <Button Content="{Binding CutStartMsg}"
                       Style="{StaticResource OptionPanel_TextWrapButton}"
                       Command="{Binding CutStartCommand}"
                       Visibility="{Binding CutStartBtnVisibility}"
                       Margin="2.5,0,2.5,0"/>
-               <Button Content="{Binding CutEndMsg}"
+                  <Button Content="{Binding QualityMsg}"
                       Style="{StaticResource OptionPanel_TextWrapButton}"
-                       Command="{Binding CutEndCommand}"
-                       Visibility="{Binding CutEndBtnVisibility}"
-                       Margin="2.5,0,0,0"/>
-               
+                       Command="{Binding QualityCommand}"
+                       Visibility="{Binding QualityBtnVisibility}"
+                       Margin="2.5,0,2.5,0"/>
+               </Grid>
+
+               <Grid>
+                  <Button Content="{Binding CutEndMsg}"
+                          Style="{StaticResource OptionPanel_TextWrapButton}"
+                          Command="{Binding CutEndCommand}"
+                          Visibility="{Binding CutEndBtnVisibility}"
+                          Margin="2.5,0,0,0"/>
+                  <ToggleButton Grid.Row="0"
+                         Content="{Binding BridgeDeleteMsg}"      
+                         Style="{StaticResource OptionPanel_ToggleWrapButton}"
+                         IsChecked="{Binding BridgeDeleteBtn_IsChecked}"
+                         Visibility="{Binding BridgeDeleteBtnVisibility}"
+                         Margin="2.5,0,0,0" Padding="0"/>
+               </Grid>
            </UniformGrid>

            <Grid Visibility="{Binding AllExtRedVisibility}">
@@ -108,11 +133,11 @@
            </Grid>

         </StackPanel>
-         
+
      </Border>

      <Border Margin="0,0,0,5" Style="{StaticResource Border}">
-         
+
         <StackPanel>

            <UniformGrid Columns="3" Margin="0,0,0,5">
@@ -132,7 +157,7 @@
                       Command="{Binding AllCenStartCommand}"
                       Visibility="{Binding AllCenStartBtnVisibility}"
                       Margin="2.5,0,0,0"/>
-               
+
            </UniformGrid>

            <UniformGrid Columns="3" Margin="0,0,0,5">
@@ -142,17 +167,19 @@
                       Command="{Binding OutCenEndCommand}"
                       Visibility="{Binding OutCenEndBtnVisibility}"
                       Margin="0,0,2.5,0" Padding="0"/>
+
               <Button Content="{Binding AllOutEndMsg}"
-                       Style="{StaticResource OptionPanel_TextWrapButton}"
-                       Command="{Binding AllOutEndCommand}"
-                       Visibility="{Binding AllOutEndBtnVisibility}"
-                       Margin="2.5,0,2.5,0"/>
+                   Style="{StaticResource OptionPanel_TextWrapButton}"
+                   Command="{Binding AllOutEndCommand}"
+                   Visibility="{Binding AllOutEndBtnVisibility}"
+                   Margin="2.5,0,2.5,0"/>
+
               <Button Content="{Binding AllCenEndMsg}"
                       Style="{StaticResource OptionPanel_TextWrapButton}"
                       Command="{Binding AllCenEndCommand}"
                       Visibility="{Binding AllCenEndBtnVisibility}"
                       Margin="2.5,0,0,0"/>
-               
+
            </UniformGrid>

            <UniformGrid Columns="3" Margin="0,0,0,5">
@@ -176,14 +203,14 @@
            </UniformGrid>

            <UniformGrid Columns="3" Margin="0,0,0,5">
-                <!--Bottone invisibile per permetter il corretto allineamento-->
-                <Button Content="{Binding }" Grid.Column="0"
+               <!--Bottone invisibile per permetter il corretto allineamento-->
+               <Button Content="{Binding }" Grid.Column="0"
                       Style="{StaticResource OptionPanel_TextWrapButton}"
                       Command="{Binding }"
                        Visibility="Hidden"
                       Margin="2.5,0,2.5,0"/>
-                    <!--Inverti direzione di taglio-->
-                    <Button Content="{Binding InvertMsg}" Grid.Column="0"
+               <!--Inverti direzione di taglio-->
+               <Button Content="{Binding InvertMsg}" Grid.Column="0"
                       Style="{StaticResource OptionPanel_TextWrapButton}"
                       Command="{Binding InvertCommand}"
                            Visibility="{Binding InvertBtnVisibility}"
@@ -191,7 +218,7 @@

            </UniformGrid>

-            </StackPanel>
+         </StackPanel>

      </Border>

@@ -137,34 +137,49 @@

   </Border>

-   <UniformGrid Grid.Column="0" Columns="2" Margin="0,0,0,5">
-      <Button Content="{Binding InsertPartMsg}"
-              Style="{StaticResource OptionPanel_TextButton}"
-              Command="{Binding InsertPartCommand}"
-              Margin="0,0,2.5,0"/>
-      <Button Content="{Binding StorePartMsg}"
-              Style="{StaticResource OptionPanel_TextButton}"
-              Command="{Binding StorePartCommand}"
-              Margin="2.5,0,0,0"/>
+    <UniformGrid Grid.Column="0" Columns="2" Margin="0,0,0,5">
+        <Button Content="{Binding InsertPartMsg}"
+                Style="{StaticResource OptionPanel_TextButton}"
+                Command="{Binding InsertPartCommand}"
+                Margin="0,0,2.5,0"/>
+        <Button Content="{Binding StorePartMsg}" Grid.Column="1"
+                Style="{StaticResource OptionPanel_TextButton}"
+                Command="{Binding StorePartCommand}"
+                Margin="2.5,0,0,0"/>
+        <!--<ToggleButton Content="{Binding StartCurvWJMsg}" Grid.Column="2"
+                Visibility="{Binding StartCurvWJ_Visibility}"         
+                Style="{StaticResource OptionPanel_ToggleButton}"
+                IsChecked="{Binding bStartCurvWJ}"
+                Margin="2.5,0,2.5,0"/>-->
   </UniformGrid>

-    <Grid Margin="0,0,-2.5,5">
-        <Grid.ColumnDefinitions>
-            <ColumnDefinition Width="1*"/>
-            <ColumnDefinition Width="1*"/>
-        </Grid.ColumnDefinitions>
+    <UniformGrid Grid.Column="0" Columns="{Binding CountColumn}"  Margin="0,0,0,5">
        <Button Content="{Binding RemovePartMsg}"
-                Grid.ColumnSpan="{Binding DragRettangle_Cl_Span}"
                Style="{StaticResource OptionPanel_TextButton}"
                Command="{Binding RemovePartCommand}"
                Margin="0,0,2.5,0"/>
-        <ToggleButton Content="{Binding DragRettangleMsg}" Grid.Column="1"
-                Visibility="{Binding DragRettangle_Visibility}"         
+        <ToggleButton Content="{Binding DragRectangleMsg}" Grid.Column="1"
+                Visibility="{Binding DragRectangle_Visibility}"         
                Style="{StaticResource OptionPanel_ToggleButton}"
-                IsChecked="{Binding bDragRettangle}"
+                IsChecked="{Binding bDragRectangle}"
                Margin="2.5,0,2.5,0"/>
-    </Grid>
+        <!--<ToggleButton Content="{Binding SplitCurvWJMsg}" Grid.Column="2"
+                Visibility="{Binding SplitCurvWJ_Visibility}"         
+                Style="{StaticResource OptionPanel_ToggleButton}"
+                IsChecked="{Binding bSplitCurvWJ}"
+                Margin="2.5,0,2.5,0"/>-->
+    </UniformGrid>

+    <UniformGrid Grid.Column="0" Columns="2" Margin="0,0,0,5" Visibility="{Binding WJ_Cmd_Visibility}">
+        <ToggleButton Content="{Binding SplitCurvWJMsg}" Grid.Column="2"        
+                Style="{StaticResource OptionPanel_ToggleButton}"
+                IsChecked="{Binding bSplitCurvWJ}"
+                Margin="2.5,0,2.5,0"/>
+        <ToggleButton Content="{Binding StartCurvWJMsg}" Grid.Column="2"         
+                Style="{StaticResource OptionPanel_ToggleButton}"
+                IsChecked="{Binding bStartCurvWJ}"
+                Margin="2.5,0,2.5,0"/>
+    </UniformGrid>
   
   <UniformGrid Columns="2" Margin="0,0,0,5">
      <Button Content="{Binding SelectAllMsg}"
@@ -1,4 +1,6 @@
-Imports System.IO
+Imports System.Threading
+Imports System.Windows.Threading
+Imports System.IO
 Imports System.Collections.ObjectModel
 Imports EgtWPFLib5
 Imports EgtPHOTOLib
@@ -7,6 +9,10 @@ Imports EgtUILib
 Public Class RawPartTabVM
   Inherits VMBase

+   ' Timer
+   Private m_TimerIsBusy As Boolean = False
+   Private m_RefreshTimer As New DispatcherTimer
+
   Friend OmagPhoto As OmagPhotoV

   Private m_OmagPhotoVM As OmagPhotoVM
@@ -1139,14 +1145,14 @@ Public Class RawPartTabVM
         dRawWidth = m_dTableWidth - 2 * dRawKerf
      End If
      If dRawOffsX < dRawKerf Then dRawOffsX = dRawKerf
-      If dRawOffsX + dRawLen + dRawKerf > m_dTableLength Then
-         dRawOffsX = Math.Max(dRawKerf, m_dTableLength - dRawLen - dRawKerf)
-         dRawLen = Math.Min(dRawLen, m_dTableLength - dRawOffsX - dRawKerf)
+      If dRawOffsX + dRawLen + 2 * dRawKerf > m_dTableLength Then
+         dRawOffsX = Math.Max(dRawKerf, m_dTableLength - dRawLen - 2 * dRawKerf)
+         dRawLen = Math.Min(dRawLen, m_dTableLength - dRawOffsX - 2 * dRawKerf)
      End If
      If dRawOffsY < dRawKerf Then dRawOffsY = dRawKerf
-      If dRawOffsY + dRawWidth + dRawKerf > m_dTableWidth Then
-         dRawOffsY = Math.Max(dRawKerf, m_dTableWidth - dRawWidth - dRawKerf)
-         dRawWidth = Math.Min(dRawWidth, m_dTableWidth - dRawOffsY - dRawKerf)
+      If dRawOffsY + dRawWidth + 2 * dRawKerf > m_dTableWidth Then
+         dRawOffsY = Math.Max(dRawKerf, m_dTableWidth - dRawWidth - 2 * dRawKerf)
+         dRawWidth = Math.Min(dRawWidth, m_dTableWidth - dRawOffsY - 2 * dRawKerf)
      End If
      ' Assegno i dati
      SetLength(dRawLen)
@@ -2034,11 +2040,17 @@ Public Class RawPartTabVM
         ' inserisco in elenco solo i materiali della macchina corrente
         AddHandler PhotoMap.refOptionPanelVM.SlabIsSelectedOFFICE, AddressOf OmagOFFICEMap.refRawPartTabVM.ClosePhotoWnd

-         ' Dim OmagPhotoWnd As New OmagPhotoV(Application.Current.MainWindow(), New OmagPhotoVM)
-         'OmagPhotoWnd.ShowDialog()
+         ' lancio il timer di aggiornamento dell'interfaccia, per la gestione di due OmagPHOTO che accedono allo stesso SQL
+         AddHandler m_RefreshTimer.Tick, AddressOf RefreshTimer_Tick
+         m_RefreshTimer.Interval = TimeSpan.FromMilliseconds(2000)
+         m_RefreshTimer.Start()
+
+         ' apro la finestra per accedere al DB delle lastre
         Me.OmagPhoto = New OmagPhotoV
         OmagPhoto.ShowDialog()

+         m_RefreshTimer.Stop()
+
         EgtSetCurrentContext(EgtPHOTOLib.MainData.PreviousContext)
         EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())

@@ -2156,6 +2168,17 @@ Public Class RawPartTabVM
      EgtDraw()
   End Sub

+   ' per la gestione di due OmagPHOTO che accedono allo stesso SQL
+   Private Sub RefreshTimer_Tick()
+      If Not m_TimerIsBusy And PhotoMap.refProjectVM.SelProjectMode = ProjectSlabVM.ProjectModeOpt.LIST Then
+         m_TimerIsBusy = True
+         m_RefreshTimer.Stop()
+         EgtPHOTOLib.PhotoMap.refListPageVM.RefreshLisPage()
+         m_TimerIsBusy = False
+         m_RefreshTimer.Start()
+      End If
+   End Sub
+
 #End Region ' PhotoCommand

 #Region "ConfirmPhotoCommand"
@@ -2366,6 +2389,8 @@ Public Class RawPartTabVM
      End If
      ' Aggiorno il punto precedente
      m_ptPrev = ptCurr
+      ' Resetto i ponticelli (per ora non sono in grado di muoverli assieme ai pezzi)
+      ResetAllBridges()
   End Sub

   Private Sub ModifyPhoto(ptCurr As Point3d)
@@ -137,10 +137,10 @@ Public Class SimulTabVM
         MyEstim.Estimation_IsEnabled = False
      End If
      ' Impostazioni box stime
-      NotifyPropertyChanged("Time")
-      NotifyPropertyChanged("CutLen")
-      NotifyPropertyChanged("NetArea")
-      NotifyPropertyChanged("Usage")
+      MyEstim.NotifyPropertyChanged("Time")
+      MyEstim.NotifyPropertyChanged("CutLen")
+      MyEstim.NotifyPropertyChanged("NetArea")
+      MyEstim.NotifyPropertyChanged("Usage")
      ' Nascondo eventuali pezzi in parcheggio
      HideParkedParts()
      ' Nascondo eventuale contorno da foto
@@ -71,7 +71,7 @@ Public Class OptionWindowVM
            OmagOFFICEMap.refRawPartTabVM.Refresh(PrevMeasureUnit)
            OmagOFFICEMap.refNestingTabVM.Refresh(PrevMeasureUnit)
            OmagOFFICEMap.refMoveRawModeVM.Refresh(PrevMeasureUnit)
-            OmagOFFICEMap.refSimulTabVM.MySimul.Refresh(PrevMeasureUnit)
+            If Not IsNothing(OmagOFFICEMap.refSimulTabVM.MySimul) Then OmagOFFICEMap.refSimulTabVM.MySimul.Refresh(PrevMeasureUnit)
         End If
      End Set
   End Property
@@ -14,6 +14,7 @@
      <OmagOFFICE:ShowPanelV DataContext="{StaticResource ShowPanelVM}"/>
      <OmagOFFICE:ViewPanelV DataContext="{StaticResource ViewPanelVM}"/>
      <OmagOFFICE:InstrumentPanelV DataContext="{StaticResource InstrumentPanelVM}"/>
+      <OmagOFFICE:PrintPanelV DataContext="{StaticResource PrintPanelVM}"/>
      <OmagOFFICE:VeinMatchPanelV DataContext="{StaticResource VeinMatchPanelVM}"/>
      <OmagOFFICE:MachinePanelV DataContext="{StaticResource MachinePanelVM}"/>
   </EgtFloating:EgtFloatingTray>
@@ -1,3 +1,7 @@
 Public Class ProjectV

+   Private Sub LoadPage() Handles Me.Loaded
+      OmagOFFICEMap.SetRefProjectV(Me)
+   End Sub
+
 End Class
@@ -11,7 +11,8 @@
         <RowDefinition Height="Auto"/>
         <RowDefinition Height="Auto"/>
         <RowDefinition Height="Auto"/>
-      </Grid.RowDefinitions>
+         <RowDefinition Height="Auto"/>
+        </Grid.RowDefinitions>

        <!--Titolo delle colonne-->
        <Grid Visibility="{Binding Legenda_Visibility}"
@@ -172,6 +173,32 @@
                                Grid.Column="1"/>
      </Grid>

-   </Grid>
+      <Grid Visibility="{Binding Parameter5_Visibility}"
+          Grid.Row="5"
+          Margin="0,0,0,5">
+          <Grid.ColumnDefinitions>
+              <ColumnDefinition Width="1.8*"/>
+              <ColumnDefinition Width="1.2*"/>
+          </Grid.ColumnDefinitions>
+
+          <TextBlock Text="{Binding Parameter5Msg}" Grid.Row="2"/>
+          <CheckBox IsChecked="{Binding Parameter5ChBx}" HorizontalAlignment="Center"
+                              Grid.Column="1"/>
+      </Grid>
+
+        <Grid Visibility="{Binding Parameter6_Visibility}"
+          Grid.Row="6"
+          Margin="0,0,0,5">
+            <Grid.ColumnDefinitions>
+                <ColumnDefinition Width="1.8*"/>
+                <ColumnDefinition Width="1.2*"/>
+            </Grid.ColumnDefinitions>
+
+            <TextBlock Text="{Binding Parameter6Msg}" Grid.Row="2"/>
+            <EgtWPFLib5:EgtTextBox Text="{Binding Parameter6}"
+                                Grid.Column="1"/>
+        </Grid>
+
+    </Grid>
   
 </UserControl>
@@ -143,6 +143,7 @@ Public Class SideEntityControlVM
            StringToLen(value, m_Parameter1)
            ' Recupero il valore
            StringToLen(value, m_dDripOffset)
+            StringToLen(value, m_dOffsetFiloTop)
            ' Creo le geometrie dei gocciolatoi
            RefreshSideAngleText()
            ' Aggiorno i dati delle alette
@@ -203,6 +204,7 @@ Public Class SideEntityControlVM
            RefreshSideAngleText()
         Else
            m_dDripOffset2 = m_Parameter2
+            m_dDepthFiloTop = m_Parameter2
            ' Creo le geometrie dei gocciolatoi
            RefreshSideAngleText()
         End If
@@ -347,11 +349,16 @@ Public Class SideEntityControlVM
         Return LenToString(m_Parameter4, 2)
      End Get
      Set(value As String)
-         If m_Mode <> ModeOpt.SIDEANGLE Then
+         If m_Mode = ModeOpt.DRIP Then
            StringToLen(value, m_Parameter4)
            m_dDripShort = m_Parameter4
            ' Creo le geometrie dei gocciolatoi
            RefreshSideAngleText()
+         ElseIf m_Mode = ModeOpt.ENGRAVE Then
+            StringToLen(value, m_Parameter4)
+            m_dEngraveDepth2 = m_Parameter4
+            ' Creo le geometrie dei gocciolatoi
+            RefreshSideAngleText()
         End If
      End Set
   End Property
@@ -362,6 +369,75 @@ Public Class SideEntityControlVM

 #End Region    'Parameter 4

+#Region "Parameter 5"
+
+   Private m_Parameter5_Visibility As Visibility
+   Public Property Parameter5_Visibility As Visibility
+      Get
+         Return m_Parameter5_Visibility
+      End Get
+      Set(value As Visibility)
+         m_Parameter5_Visibility = value
+         NotifyPropertyChanged(NameOf(Parameter5_Visibility))
+      End Set
+   End Property
+
+   Private m_Parameter5ChBx As Boolean
+   Public Property Parameter5ChBx As Boolean
+      Get
+         Return m_Parameter5ChBx
+      End Get
+      Set(value As Boolean)
+         If m_Mode = ModeOpt.FILOTOP Then
+            m_bCornerRadius = value
+            ' Creo le geometrie dei gocciolatoi
+            RefreshSideAngleText()
+            m_Parameter5ChBx = m_bCornerRadius
+         End If
+         NotifyPropertyChanged("Parameter5ChBx")
+      End Set
+   End Property
+   Private Sub SetParameter5(value As Boolean)
+      m_Parameter5ChBx = value
+      NotifyPropertyChanged("Parameter5ChBx")
+   End Sub
+
+#End Region    'Parameter 5
+
+#Region "Parameter 6"
+
+   Private m_Parameter6_Visibility As Visibility
+   Public Property Parameter6_Visibility As Visibility
+      Get
+         Return m_Parameter6_Visibility
+      End Get
+      Set(value As Visibility)
+         m_Parameter6_Visibility = value
+         NotifyPropertyChanged(NameOf(Parameter6_Visibility))
+      End Set
+   End Property
+
+   Private m_Parameter6 As Double
+   Public Property Parameter6 As String
+      Get
+         Return LenToString(m_Parameter6, 2)
+      End Get
+      Set(value As String)
+         If m_Mode = ModeOpt.ENGRAVE Then
+            StringToLen(value, m_Parameter6)
+            m_dEngraveAngle = m_Parameter6
+            ' Creo le geometrie dei gocciolatoi
+            RefreshSideAngleText()
+         End If
+      End Set
+   End Property
+   Private Sub SetParameter6(value As Double)
+      m_Parameter6 = value
+      NotifyPropertyChanged("Parameter6")
+   End Sub
+
+#End Region
+
   Private m_dSideAngle As Double = 0

   Private m_HeightA As Double = 0
@@ -369,14 +445,18 @@ Public Class SideEntityControlVM
   Private m_DeltaAngF As Double = 0
   Private m_DeltaAngA As Double = 0

+   Private m_SelList As New List(Of Integer)
   Private m_dOffsetFiloTop As Double = 5
   Private m_dDepthFiloTop As Double = 5
+   Private m_bCornerRadius As Boolean = False

   Private m_dDripOffset As Double = 10
   Private m_dDripOffset2 As Double = 0
   Private m_nEngrNbr2 As Integer = 1
   Private m_dDripDepth As Double = 10
+   Private m_dEngraveDepth2 As Double = 5
   Private m_dDripShort As Double = 0
+   Private m_dEngraveAngle As Double = 0

   Private m_CallingWndScene As Scene
   Private m_CallingWindow As CallingWindowOpt
@@ -415,16 +495,36 @@ Public Class SideEntityControlVM
      End Set
   End Property

-   Private m_Parameter4Msg As String = EgtMsg(MSG_IMPORTPAGEUC + 12)
+   Private m_Parameter4Msg As String = EgtMsg(MSG_IMPORTPAGEUC + 11) & "2"
   Public Property Parameter4Msg As String
      Get
-         Return m_Parameter4Msg      ' Accorciamento
+         Return m_Parameter4Msg      ' Affondamento2
      End Get
      Set(value As String)
         m_Parameter4Msg = value
      End Set
   End Property

+   Private m_Parameter5Msg As String = "RoundOff"
+   Public Property Parameter5Msg As String
+      Get
+         Return m_Parameter5Msg      ' Arrotonda
+      End Get
+      Set(value As String)
+         m_Parameter5Msg = value
+      End Set
+   End Property
+
+   Private m_Parameter6Msg As String = "Angle"
+   Public Property Parameter6Msg As String
+      Get
+         Return m_Parameter6Msg      ' Angolo
+      End Get
+      Set(value As String)
+         m_Parameter6Msg = value
+      End Set
+   End Property
+
 #End Region    ' Messages

 #Region "CONSTRUCTOR"
@@ -470,21 +570,38 @@ Public Class SideEntityControlVM
         Parameter2_Visibility = Visibility.Visible
         Parameter2ab_Visibility = Visibility.Hidden
         Parameter4_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Hidden
      ElseIf m_Mode = ModeOpt.FILOTOP Then
         Parameter23_Visibility = Windows.Visibility.Hidden
         Parameter2_Visibility = Visibility.Visible
         Parameter2ab_Visibility = Visibility.Hidden
+         Parameter4_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Visible
+         Parameter6_Visibility = Visibility.Hidden
      ElseIf m_Mode = ModeOpt.ALZANDFRONT Then
         Parameter2_Visibility = Visibility.Hidden
         Parameter23_Visibility = Windows.Visibility.Visible
         Parameter2ab_Visibility = Visibility.Visible
         Parameter4_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Hidden
+      ElseIf m_Mode = ModeOpt.ENGRAVE Then
+         ' Temporaneamente lo disabilito
+         Parameter23_Visibility = Windows.Visibility.Visible
+         Parameter4_Visibility = Visibility.Visible
+         Parameter2ab_Visibility = Visibility.Visible
+         Parameter2_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Visible
      Else
         ' Temporaneamente lo disabilito
         Parameter23_Visibility = Windows.Visibility.Visible
-         Parameter4_Visibility = Visibility.Collapsed
+         Parameter4_Visibility = Visibility.Visible
         Parameter2ab_Visibility = Visibility.Visible
         Parameter2_Visibility = Visibility.Hidden
+         Parameter5_Visibility = Visibility.Hidden
+         Parameter6_Visibility = Visibility.Hidden
      End If

      '------------------ VALORI E TITOLI PARAMETRI 
@@ -497,12 +614,15 @@ Public Class SideEntityControlVM

      ElseIf m_Mode = ModeOpt.FILOTOP Then
         Parameter1Msg = EgtMsg(MSG_IMPORTPAGEUC + 10)      ' Offset
-         Dim x As String = EgtMsg(MSG_IMPORTPAGEUC + 11)
         Parameter2Msg = EgtMsg(MSG_IMPORTPAGEUC + 11)      ' Depth
+         Parameter5Msg = "Round Off"
         m_dOffsetFiloTop = GetMainPrivateProfileDouble(S_SIDES, K_FILOTOPOFFSET, 5)
         m_dDepthFiloTop = GetMainPrivateProfileDouble(S_SIDES, K_FILOTOPDEPTH, 5)
+         m_bCornerRadius = GetMainPrivateProfileInt(S_SIDES, K_FILOTOPROUNDOFF, 0) <> 0
         SetParameter1(m_dOffsetFiloTop)
         SetParameter2(m_dDepthFiloTop)
+         SetParameter5(m_bCornerRadius)
+         m_SelList.Clear()

      ElseIf m_Mode = ModeOpt.ENGRAVE Or m_Mode = ModeOpt.DRIP Then
         Parameter1Msg = EgtMsg(MSG_IMPORTPAGEUC + 10)      ' Offset
@@ -512,12 +632,15 @@ Public Class SideEntityControlVM
         m_nEngrNbr2 = GetMainPrivateProfileInt(S_SIDES, K_ENGRAVENUMBER2, 1)
         m_dDripDepth = GetMainPrivateProfileDouble(S_SIDES, K_DRIPDEPTH, 10)
         m_dDripShort = GetMainPrivateProfileDouble(S_SIDES, K_DRIPSHORT, 0)
+         m_dEngraveDepth2 = GetMainPrivateProfileDouble(S_SIDES, K_ENGRAVEDEPTH2, 0)
+         m_dEngraveAngle = GetMainPrivateProfileDouble(S_SIDES, K_ENGRAVEANGLE, 0)
         SetParameter1(m_dDripOffset)
         SetParameter2(m_dDripOffset2)
         SetParameter2a(m_nEngrNbr2)
         SetParameter2b(m_dDripOffset2)
         SetParameter3(m_dDripDepth)
-         SetParameter4(m_dDripShort)
+         SetParameter4(m_dEngraveDepth2)
+         SetParameter6(m_dEngraveAngle)

      ElseIf m_Mode = ModeOpt.ALZANDFRONT Then
         ' definisco i nomi dei campi
@@ -536,6 +659,9 @@ Public Class SideEntityControlVM
         LoadCurrentCompo()
      End If

+      ' aggiorno i testi sui lati della figura
+      RefreshSideAngleText()
+
      ' Aggiorno visualizzazione
      If CallingWindow = CallingWindowOpt.COMPO Then
         EgtZoom(ZM.ALL)
@@ -609,7 +735,9 @@ Public Class SideEntityControlVM
         ' Creo le geometrie dei gocciolatoi
         CreateDripGeom(PartId)
      ElseIf m_Mode = ModeOpt.ENGRAVE Then
-         '--- ??? ---
+         ' --- ??? ---
+      ElseIf m_Mode = ModeOpt.FILOTOP Then
+         CreateFiloTopPreView(m_SelList, False)
      End If
      ' Aggiorno visualizzazione
      EgtDraw()
@@ -717,21 +845,25 @@ Public Class SideEntityControlVM
      End If

      ' Aggiorno interfaccia
-      If m_CallingWindow = CallingWindowOpt.DXFIMPORT Then
+      If m_CallingWindow = CallingWindowOpt.DXFIMPORT Or m_CallingWindow = CallingWindowOpt.COMPO Then
         If m_Mode = ModeOpt.SIDEANGLE Then
            For Each Entity In m_SideEntityList
-               If DirectCast(Entity, SideAngleEntity).dSideAngle <> 0 Then
-                  Dim nI As Integer = 0
-                  StringToInt(Entity.sEntityName.Substring(1), nI)
-                  CheckSide(nI)
+               If TypeOf Entity Is SideAngleEntity Then
+                  If DirectCast(Entity, SideAngleEntity).dSideAngle <> 0 Then
+                     Dim nI As Integer = 0
+                     StringToInt(Entity.sEntityName.Substring(1), nI)
+                     CheckSide(nI)
+                  End If
               End If
            Next
         Else
            For Each Entity In m_SideEntityList
-               If DirectCast(Entity, DripEntity).bHaveDrip Then
-                  Dim nI As Integer = 0
-                  StringToInt(Entity.sEntityName.Substring(1), nI)
-                  CheckSide(nI)
+               If TypeOf Entity Is DripEntity Then
+                  If DirectCast(Entity, DripEntity).bHaveDrip Then
+                     Dim nI As Integer = 0
+                     StringToInt(Entity.sEntityName.Substring(1), nI)
+                     CheckSide(nI)
+                  End If
               End If
            Next
         End If
@@ -1101,6 +1233,9 @@ Public Class SideEntityControlVM
      Dim nCrvId = EgtGetFirstInGroup(DripLayer)
      While nCrvId <> GDB_ID.NULL
         EgtOffsetCurve(nCrvId, -m_dDripOffset, OFF_TYPE.EXTEND)
+         If m_Mode = ModeOpt.ENGRAVE Then
+            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+         End If
         nCrvId = EgtGetNext(nCrvId)
      End While
      ' Eventuali curve aggiuntive con offset2
@@ -1111,11 +1246,19 @@ Public Class SideEntityControlVM
            For i As Integer = 1 To m_nEngrNbr2
               Dim nNewId As Integer = EgtCopy(nCrvId, nCrvId, GDB_POS.AFTER)
               EgtOffsetCurve(nNewId, -i * m_dDripOffset2, OFF_TYPE.EXTEND)
+               If m_Mode = ModeOpt.ENGRAVE Then
+                  EgtSetInfo(nNewId, INFO_DEPTH, m_dEngraveDepth2)
+               End If
            Next
            nCrvId = nNextCrvId
         End While
      End If
+
+      Dim ListEngraveSideAng As New List(Of Integer)
+
      If m_Mode = ModeOpt.DRIP Then
+         ' Assegno colore e attributi
+         Dim nInd As Integer = 0
         ' Esplodo nelle curve componenti
         nCrvId = EgtGetFirstInGroup(DripLayer)
         While nCrvId <> GDB_ID.NULL
@@ -1134,14 +1277,70 @@ Public Class SideEntityControlVM
         End While
      Else
         ' Assegno colore e attributi
+         Dim nInd As Integer = 0
         nCrvId = EgtGetFirstInGroup(DripLayer)
         While nCrvId <> GDB_ID.NULL
            EgtSetColor(nCrvId, COL_MCH_DRIPCUT())
-            EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
+            'EgtSetInfo(nCrvId, INFO_DEPTH, m_dDripDepth)
            EgtSetInfo(nCrvId, INFO_STRICT, If(m_dDripShort > EPS_SMALL, "3", "0"))
+            If nInd = 0 Then
+               ' solo se m_dEngraveAngle > 0
+               If Math.Abs(m_dEngraveAngle) > EPS_ANG_SMALL Then
+                  ' salvo l'Id della curva che deve essere manipolato separatamente
+                  ListEngraveSideAng.Add(nCrvId)
+               Else
+                  EgtRemoveInfo(nCrvId, INFO_SIDE_ANGLE)
+                  EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+               End If
+            Else
+               If nInd = m_nEngrNbr2 Then
+                  nInd = -1
+               End If
+               EgtModifyCurveThickness(nCrvId, -m_dEngraveDepth2)
+            End If
+            nInd = nInd + 1
+            If nInd > m_nEngrNbr2 Then nInd = 0
            nCrvId = EgtGetNext(nCrvId)
         End While
      End If
+      SplitJointedSideEngrave(ListEngraveSideAng)
+   End Sub
+
+   Private Sub SplitJointedSideEngrave(ListEngraveSideAngId As List(Of Integer))
+      For Each nCrvId As Integer In ListEngraveSideAngId
+         ' eventualmente separo il taglio inclinato
+         Dim dUs, dUe As Double
+         EgtCurveDomain(nCrvId, dUs, dUe)
+         Dim dU As Double = dUs
+         While dU < dUe ' + EPS_ZERO
+            Dim ptCurr As Point3d
+            EgtAtParamPoint(nCrvId, dU + 1, nCrvId, ptCurr)
+            ' separa la curva in questo punto
+            Dim nNewCurvId As Integer = GDB_ID.NULL
+            If dUe > 1 Then
+               nNewCurvId = EgtSplitCurveAtPoint(nCrvId, ptCurr, GDB_RT.LOC)
+            Else
+               nNewCurvId = nCrvId
+            End If
+            EgtSetColor(nCrvId, COL_MCH_ONENGRAVE_ANG())
+            EgtSetInfo(nCrvId, INFO_SIDE_ANGLE, m_dEngraveAngle)
+            ' recupero il vettore di estrusione della curva e la direzione della curva
+            Dim vtAux As Vector3d
+            EgtStartVector(nCrvId, vtAux)
+            Dim vtExtrusion As Vector3d
+            EgtCurveExtrusion(nCrvId, vtExtrusion)
+            ' ruoto il vetottore nella nuova direzione
+            vtExtrusion.Rotate(vtAux, -m_dEngraveAngle)
+            ' assegno il vettore di estrusione nella nuova direzione indicata (segno negativo perchè dentro il pezzo)
+            EgtModifyCurveExtrusion(nCrvId, vtExtrusion)
+            Dim ExtendFactor As Double = New Vector3d(0, 0, 1) * vtExtrusion
+            EgtModifyCurveThickness(nCrvId, -m_dDripDepth / ExtendFactor)
+            If dUe = 1 Then Exit While
+            nCrvId = nNewCurvId
+            ' aggiorno i valori del dominio della curva che rimane
+            EgtCurveDomain(nCrvId, dUs, dUe)
+         End While
+      Next
   End Sub

   ' Funzione che modifica l'inclinazione di un lato
@@ -1266,8 +1465,9 @@ Public Class SideEntityControlVM
      If m_Mode = ModeOpt.SIDEANGLE Then
         WriteMainPrivateProfileString(S_SIDES, K_SIDEANGLE, DoubleToString(m_Parameter1, 3))
      ElseIf m_Mode = ModeOpt.FILOTOP Then
-         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPOFFSET, DoubleToString(m_Parameter1, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPDEPTH, DoubleToString(m_Parameter2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPOFFSET, LenToString(m_Parameter1, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPDEPTH, LenToString(m_Parameter2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_FILOTOPROUNDOFF, If(m_Parameter5ChBx, "1", "0"))
         ' Aggiorno affondamento del profilo
         Dim nPartId As Integer = EgtGetFirstPart()
         While nPartId <> GDB_ID.NULL
@@ -1283,10 +1483,10 @@ Public Class SideEntityControlVM
            nPartId = EgtGetNextPart(nPartId)
         End While
      ElseIf m_Mode = ModeOpt.DRIP Then
-         WriteMainPrivateProfileString(S_SIDES, K_DRIPOFFSET, DoubleToString(m_dDripOffset, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_DRIPOFFSET2, DoubleToString(m_dDripOffset2, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_DRIPDEPTH, DoubleToString(m_dDripDepth, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_DRIPSHORT, DoubleToString(m_dDripShort, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_DRIPOFFSET, LenToString(m_dDripOffset, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_DRIPOFFSET2, LenToString(m_dDripOffset2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_DRIPDEPTH, LenToString(m_dDripDepth, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_DRIPSHORT, LenToString(m_dDripShort, 3))
         For Each objEntity In m_SideEntityList
            If TypeOf objEntity Is DripEntity Then
               Dim CurrEntity As DripEntity = DirectCast(objEntity, DripEntity)
@@ -1295,11 +1495,13 @@ Public Class SideEntityControlVM
            End If
         Next
      ElseIf m_Mode = ModeOpt.ENGRAVE Then
-         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEOFFSET, DoubleToString(m_dDripOffset, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, DoubleToString(m_dDripOffset2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEOFFSET, LenToString(m_dDripOffset, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEOFFSET2, LenToString(m_dDripOffset2, 3))
         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVENUMBER2, m_nEngrNbr2.ToString)
-         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, DoubleToString(m_dDripDepth, 3))
-         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVESHORT, DoubleToString(m_dDripShort, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH, LenToString(m_dDripDepth, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVESHORT, LenToString(m_dDripShort, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEDEPTH2, LenToString(m_dEngraveDepth2, 3))
+         WriteMainPrivateProfileString(S_SIDES, K_ENGRAVEANGLE, LenToString(m_dEngraveAngle, 3))
         For Each objEntity In m_SideEntityList
            If TypeOf objEntity Is DripEntity Then
               Dim CurrEntity As DripEntity = DirectCast(objEntity, DripEntity)
@@ -1736,8 +1938,146 @@ Public Class SideEntityControlVM
      End If
   End Sub

+   ' ----------------------- FILO TOP -----------------------
+   Public Sub CreateFiloTopPreView(SelList As List(Of Integer), Optional bReadInfo As Boolean = True)
+      m_SelList = SelList
+      If m_SelList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            ' verifico che lemento corrente appartenga all'elenco degli elementi selezionati
+            Dim bIsSelected As Boolean = m_SelList.Find(Function(value As Integer)
+                                                           Return value = nLayId
+                                                        End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso EgtExistsInfo(nLayId, INFO_FILOTOP) AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' verifico il Layer "FiloTop" sia associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer "FiloTop"
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' lo creo
+                  nLayFiloTop = EgtCreateGroup(nPartId)
+                  EgtSetName(nLayFiloTop, "FiloTop")
+                  EgtSetInfo(nLayFiloTop, "InLoopRef", nLayId)
+                  EgtSetInfo(nLayId, "FiloTopRef", nLayFiloTop)
+               End If
+
+               ' carico i dati del filo top selezionato
+               If bReadInfo Then
+                  EgtGetInfo(nLayFiloTop, INFO_OFFSET, m_dOffsetFiloTop)
+                  EgtGetInfo(nLayFiloTop, INFO_DEPTH, m_dDepthFiloTop)
+                  Dim nVal As Integer = If(m_bCornerRadius, 1, 0)
+                  EgtGetInfo(nLayFiloTop, INFO_ROUNDOFF, nVal)
+                  m_bCornerRadius = If(nVal = 1, True, False)
+                  SetParameter1(m_dOffsetFiloTop)
+                  SetParameter2(m_dDepthFiloTop)
+                  SetParameter5(m_bCornerRadius)
+               End If
+
+               ' procedo alla creazione della curva
+               Dim nIdCompoCurve As Integer = GDB_ID.NULL
+               ' cancello un eventuale curva composita creata in precedenza
+               nIdCompoCurve = EgtGetFirstNameInGroup(nLayFiloTop, "OffsetPreView")
+               If nIdCompoCurve <> GDB_ID.NULL Then
+                  EgtErase(nIdCompoCurve)
+               End If
+               Dim nCompoCurve As New List(Of Integer)
+               ' costruisco il percorso chiuso dati i lati di contorno 
+               Dim nLine As Integer = EgtGetFirstInGroup(nLayId)
+               While nLine <> GDB_ID.NULL
+                  nCompoCurve.Add(nLine)
+                  nLine = EgtGetNext(nLine)
+               End While
+               Dim PtNearStart As Point3d
+               Dim nInfoRoundOff As Integer = If(m_bCornerRadius, 1, 0)
+
+               nIdCompoCurve = EgtCreateCurveCompoByChain(nLayFiloTop, nCompoCurve.ToArray, PtNearStart, False)
+               EgtSetName(nIdCompoCurve, "OffsetPreView")
+
+               ' salvo i dati nel layer FiloTop
+               EgtSetInfo(nLayFiloTop, INFO_OFFSET, m_dOffsetFiloTop)
+               EgtSetInfo(nLayFiloTop, INFO_DEPTH, m_dDepthFiloTop)
+               EgtSetInfo(nLayFiloTop, INFO_ROUNDOFF, nInfoRoundOff)
+
+               Dim bOk As Boolean = False
+               ' leggo che tipo di offset applicare (Round, Extend)
+               If nInfoRoundOff <> 1 Then
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dOffsetFiloTop, OFF_TYPE.EXTEND)
+               Else
+                  bOk = EgtOffsetCurve(nIdCompoCurve, -m_dOffsetFiloTop, OFF_TYPE.FILLET)
+               End If
+
+               ' se la generazione della curva non va a buon fine
+               If Not bOk Then
+                  EgtErase(nLayFiloTop)
+                  EgtRemoveInfo(nLayId, "FiloTopRef")
+                  EgtOutLog("Error in generation OffsetPreView in TopEgde ")
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
+   ' riceve la lista dei LayerFiloTop che devono essere eliminati
+   Public Sub EraseFiloTopPreview(EraseList As List(Of Integer))
+      Dim m_EraseList As List(Of Integer) = EraseList
+      If m_EraseList.Count < 1 Then Return
+      Dim nPartId As Integer = EgtGetFirstPart()
+      While nPartId <> GDB_ID.NULL
+         Dim nLayId As Integer = EgtGetFirstLayer(nPartId)
+         While nLayId <> GDB_ID.NULL
+            Dim sLayName As String = ""
+            Dim bIsSelected As Boolean = m_EraseList.Find(Function(value As Integer)
+                                                             Return value = nLayId
+                                                          End Function) <> 0
+            If EgtGetName(nLayId, sLayName) AndAlso sLayName = NAME_INLOOP AndAlso bIsSelected Then
+               ' ---------------------- Inizio GESTIONE PREVIEW percorso -------------------------------
+               Dim nLayFiloTop As Integer = GDB_ID.NULL
+               Dim nInLoopRef As Integer = GDB_ID.NULL
+               nLayFiloTop = EgtGetFirstNameInGroup(nPartId, "FiloTop")
+               EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               ' cerco il Layer associato all'InLoop corrente
+               While (nLayFiloTop <> GDB_ID.NULL AndAlso nInLoopRef <> nLayId)
+                  nLayFiloTop = EgtGetNextName(nLayFiloTop, "FiloTop")
+                  EgtGetInfo(nLayFiloTop, "InLoopRef", nInLoopRef)
+               End While
+
+               ' se non esiste il Layer
+               If nLayFiloTop = GDB_ID.NULL Then
+                  ' esco 
+                  Return
+               Else
+                  ' lo elimino
+                  EgtErase(nLayFiloTop)
+                  EraseList.Remove(nLayId)
+               End If
+               ' ---------------------- Fine GESTIONE PREVIEW percorso -------------------------------
+            End If
+            nLayId = EgtGetNextLayer(nLayId)
+         End While
+         nPartId = EgtGetNextPart(nPartId)
+      End While
+      EgtDraw()
+   End Sub
+
 #End Region    ' METHODS

+
+
 End Class

 Public MustInherit Class SideEntity
@@ -128,9 +128,9 @@ Public Class TopCommandBarVM
   ''' <summary>
   ''' Execute the New.  This method is invoked by the NewCommand.
   ''' </summary>
-   Friend Sub NewCmd(Optional bUseDefaults As Boolean = False)
+   Friend Sub NewCmd()
      OmagOFFICEMap.refSceneHostVM.NewProject()
-      OmagOFFICEMap.refMachGroupPanelVM.InitMachGroupList(bUseDefaults)
+      OmagOFFICEMap.refMachGroupPanelVM.InitMachGroupList(False)
   End Sub

 #End Region ' NewCommand
@@ -18,6 +18,7 @@
   <EgtWPFLib5:ShowPanelVM x:Key="ShowPanelVM"/>
   <EgtWPFLib5:ViewPanelVM x:Key="ViewPanelVM"/>
   <EgtWPFLib5:InstrumentPanelVM x:Key="InstrumentPanelVM"/>
+   <OmagOFFICE:PrintPanelVM x:Key="PrintPanelVM"/>
   <OmagOFFICE:MyMachinePanelVM x:Key="MachinePanelVM"/>
   <OmagOFFICE:VeinMatchPanelVM x:Key="VeinMatchPanelVM"/>
   <OmagOFFICE:OptionPanelVM x:Key="OptionPanelVM"/>
@@ -223,7 +224,11 @@
      <Setter Property="Height" Value="30"/>
   </Style>

-   <Style x:Key="OptionPanel_NestingToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+    <Style x:Key="OptionPanel_ToggleWrapButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
+        <Setter Property="Height" Value="45"/>
+    </Style>
+
+    <Style x:Key="OptionPanel_NestingToggleButton" TargetType="{x:Type ToggleButton}" BasedOn="{StaticResource {x:Type ToggleButton}}">
      <Setter Property="Height" Value="60"/>
      <Setter Property="Width" Value="60"/>
   </Style>
@@ -1,5 +1,6 @@
 Imports EgtWPFLib5
 Imports EgtPHOTOLib
+Imports EgtUILib

 Module OmagOFFICEMap

@@ -120,7 +121,6 @@ Module OmagOFFICEMap
      End Get
   End Property

-   
   'Public ReadOnly Property refProjectVM As ProjectLibVM
   '   Get
   '      Return PhotoMap.refProjectVM
@@ -230,6 +230,43 @@ Module OmagOFFICEMap
      Return Not IsNothing(m_refSimulTabVM)
   End Function

+
+   Private m_refProjectV As ProjectV
+   Friend Sub SetRefProjectV(ProjectV As ProjectV)
+      m_refProjectV = ProjectV
+   End Sub
+
+   Private m_WidthProjectV As Integer = 2000
+   Friend Sub SetWidthDimProjectV(Width As Integer)
+      m_WidthProjectV = Width
+   End Sub
+   Friend Function GetWidthDimProjectV() As Integer
+      If Not IsNothing(m_refProjectV) Then
+         Try
+            m_WidthProjectV = CInt(m_refProjectV.ActualWidth)
+         Catch ex As Exception
+            EgtOutLog(ex.Message)
+         End Try
+      End If
+      Return m_WidthProjectV
+   End Function
+
+   Private m_HeightProjectV As Integer = 1000
+   Friend Sub SetHeightDimProjectV(Eight As Integer)
+      m_HeightProjectV = Eight
+   End Sub
+
+   Friend Function GetHeightDimProjectV() As Integer
+      If Not IsNothing(m_refProjectV) Then
+         Try
+            m_HeightProjectV = CInt(m_refProjectV.ActualHeight)
+         Catch ex As Exception
+            EgtOutLog(ex.Message)
+         End Try
+      End If
+      Return m_HeightProjectV
+   End Function
+
 #End Region    ' Set

 #Region "Init"
Author	SHA1	Message	Date
NicolaP	4c142df7ef	Gestione qualità tagli WJ in SplitPage	2023-02-20 19:21:21 +01:00
NicolaP	72f41bacab	Migliorata gestione salvataggio lavorazioni (cherry picked from commit `c01972f99e`)	2023-02-20 13:02:09 +01:00
NicolaP	be30ebadbf	Migliorata spaziatura nella pagina Split	2023-02-15 12:52:40 +01:00
NicolaP	e67cf50f50	Merge branch 'Features/Set_CurrSawing' into develop	2023-02-15 12:30:41 +01:00
NicolaP	f82a6495bd	Gestione setting lavorazioni correnti di Office	2023-02-15 12:30:07 +01:00
NicolaP	c6262613c8	Aggiorno dati di stime di lavoro	2023-02-13 15:37:06 +01:00
NicolaP	31edd150bd	Aggiunti commenti per preprare aggiornamento SelezionaLavorazione	2023-02-13 13:08:47 +01:00
NicolaP	9fdd7b4b77	Migliorata gestione stampa progetto corrente	2023-02-13 10:52:40 +01:00
NicolaP	b0bae3af98	Correzione gestione parcheggio	2023-02-10 13:25:50 +01:00
NicolaP	235ec10a2d	Correzione non visualizzazione Magnetico in VeinMatch	2023-02-09 16:22:11 +01:00
NicolaP	66061ad262	Rimosso pulsante magnetico in VeinMatch	2023-02-09 15:10:07 +01:00
NicolaP	3e99eb1a8f	Merge branch 'Features/Print_LayOut_Machine' into develop	2023-02-09 10:00:25 +01:00
NicolaP	753ff7b4f1	Recupero dimensione corrente orgetto per stampa	2023-02-09 09:49:04 +01:00
NicolaP	1edfe486cb	Migliorato rapporto di stsampa immagini	2023-02-08 19:36:09 +01:00
NicolaP	7190993f11	Aggiunto bottone per stampa layout corrente	2023-02-08 18:13:12 +01:00
NicolaP	249289144f	Merge branch 'master' into develop	2023-02-08 14:51:06 +01:00
NicolaP	36ee5e4352	Cambio versione 2.5b1	2023-02-03 16:32:25 +01:00
NicolaP	147099b702	Merge branch 'develop'	2023-02-03 16:29:01 +01:00
NicolaP	dd81384bb8	Migliorata gestione rotazione in park	2023-01-30 15:38:13 +01:00
NicolaP	9cf61d691d	Gestione rotazione pezzi con Drag	2023-01-20 12:24:10 +01:00
NicolaP	358c5df390	Merge remote-tracking branch 'origin/HEAD'	2023-01-18 18:09:32 +01:00
NicolaP	ccaec9af5a	Merge branch 'develop'	2023-01-18 18:04:12 +01:00
NicolaP	1dbecd0083	Gestione allungamento tagli curvi	2023-01-18 18:03:57 +01:00
DarioS	11c6f95378	OmagOFFICE : - aggiornamento info programma.	2023-01-18 09:17:16 +01:00
NicolaP	3604a85cc1	Merge branch 'develop'	2023-01-05 18:58:40 +01:00
NicolaP	3aaaa0fcb6	Lettura StarEndModifyOnIntCorner da file macchina, ver 2.5a1	2023-01-05 18:58:04 +01:00
NicolaP	52da2bc2c9	Merge branch 'develop'	2022-12-07 19:55:29 +01:00
NicolaP	4de476907f	Migliorata gestione ventose	2022-12-07 19:55:06 +01:00
NicolaP	07bcb7479b	Merge branch 'master' into develop	2022-11-09 10:32:11 +01:00
NicolaP	92818aafd4	Cambio versione 2.4k1	2022-11-09 10:31:37 +01:00
NicolaP	f4326b27b7	Merge branch 'develop'	2022-11-09 10:29:46 +01:00
NicolaP	1f4a0afd75	Merge commit '565ba3c7564c5c4610b99ac1b6460b627f3a7708' into develop	2022-11-07 18:19:27 +01:00
NicolaP	565ba3c756	Gestione primo Engrave inclinato	2022-11-07 18:19:11 +01:00
NicolaP	7ab4e56594	Merge branch 'Features/StartEnd_Modify_On_Internal_Corner' into develop	2022-11-07 17:16:11 +01:00
NicolaP	697fb4c730	Gestioena modifica tagli su angoli interni	2022-11-07 17:09:47 +01:00
NicolaP	4f5804206d	Merge branch 'master' into develop	2022-10-24 09:48:15 +02:00
NicolaP	58828cf846	Merge branch 'master' of https://gitlab.steamware.net/egaltech/omagoffice	2022-10-24 09:47:44 +02:00
NicolaP	36138ec459	Merge branch 'develop'	2022-10-24 09:43:54 +02:00
NicolaP	7fc49b0d1d	Merge branch 'master' into develop	2022-10-24 09:39:13 +02:00
NicolaP	cf9379272c	Merge branch 'develop'	2022-10-24 09:38:49 +02:00
NicolaP	cd6714752e	Cambio versione 2.4j1	2022-10-24 09:37:48 +02:00
DarioS	4c62410c20	OmagOFFICE 2.4j1 : - ricompilazione con cambio versione.	2022-10-24 08:48:12 +02:00
NicolaP	b017fef2b9	Merge branch 'develop'	2022-10-17 14:39:17 +02:00
NicolaP	17785afc20	Merge branch 'Features/Manage_Raw' into develop	2022-10-17 14:39:04 +02:00
NicolaP	62953c981e	Correzione creazione nuovo grezzo in macchina	2022-10-17 14:36:08 +02:00
NicolaP	c3a3057420	Merge branch 'master' into develop	2022-10-06 16:15:58 +02:00
NicolaP	8fa7b6188c	Cambio versione: 2.4i4	2022-10-06 13:05:43 +02:00
NicolaP	f3770dfc7c	Eliinazione caratteri speciali da perocrosi file	2022-10-06 11:11:43 +02:00
NicolaP	1358cef04a	Merge branch 'develop'	2022-10-05 19:57:08 +02:00
NicolaP	e0fe4d9444	Migliorata abilitazione bottoni gruppi di lavoro	2022-10-05 19:39:48 +02:00
NicolaP	05186db728	Merge remote-tracking branch 'origin/HEAD' into develop	2022-10-05 10:17:32 +02:00
DarioS	5b21559e56	OmagOFFICE 2.4i3 : - modifiche per gestione multidirettori di base delle macchine.	2022-10-04 11:16:17 +02:00
NicolaP	13a774429e	Merge branch 'develop'	2022-09-19 15:08:51 +02:00
NicolaP	bde6c38733	Migliorata gestione lavorazioni con ponticelli	2022-09-19 15:08:35 +02:00
NicolaP	e3beaf2aa3	Merge branch 'develop'	2022-09-15 12:10:23 +02:00
NicolaP	deb8b34402	Gestione eliminazione Pezzi/Ponticelli, migliorata gestione reset ponticelli	2022-09-15 12:10:03 +02:00
NicolaP	49311579ec	Merge branch 'develop'	2022-09-15 11:27:01 +02:00
NicolaP	589b7211ab	Migliorata gestione selezione lati per ponticelli	2022-09-15 11:26:14 +02:00
NicolaP	892806d32a	Merge remote-tracking branch 'origin/master' into develop	2022-09-15 11:21:12 +02:00
DarioS	914a89014e	OmagOFFICE : - aggiunte altre info per Bridges.	2022-09-14 10:11:55 +02:00
NicolaP	3043a717d3	Merge branch 'develop'	2022-09-13 15:40:13 +02:00
NicolaP	8a3b52e082	Migliorato caricamento direttori macchine	2022-09-13 15:39:52 +02:00
NicolaP	f4126dba7a	Reset Bridges se muovo grezzo	2022-09-13 15:32:07 +02:00
NicolaP	6009db35cd	Merge branch 'develop'	2022-09-13 12:08:32 +02:00
NicolaP	4a42374891	Migliorata gestione Bridges	2022-09-13 12:08:05 +02:00
NicolaP	64c6a6cf9b	Merge remote-tracking branch 'origin/master' into develop	2022-09-13 11:36:27 +02:00
DarioS	d1a8f033db	OmagOFFICE 2.4i2 : - prime modifiche per direttori multipli di base delle macchine.	2022-09-13 08:59:25 +02:00
NicolaP	a6be019b32	Merge branch 'Features/Manage_MachinesDir' into develop	2022-09-12 17:27:09 +02:00
NicolaP	c343b18571	Preparazione lista direttori macchina	2022-09-12 17:21:50 +02:00
NicolaP	f2a777a226	Correzione gestione alzatine/frontalini	2022-09-06 11:53:08 +02:00
NicolaP	2e0979a618	Merge branch 'Features/Waterjet_Bridges' into develop	2022-09-05 17:37:05 +02:00
NicolaP	bd33450bb0	Gestione comando Canc e Escape per interrompere	2022-08-31 18:07:55 +02:00
NicolaP	fa0ebe1503	Utilizzo costanti per Bridge	2022-08-31 17:49:19 +02:00
NicolaP	d33a976d3b	Gestione costruzione ponticelli WJ	2022-08-31 17:41:28 +02:00
NicolaP	ebe0c84e1f	Merge commit '090e930a0febd976d4c9e2f135c61b71c9898d5b' into develop	2022-08-24 12:37:34 +02:00
DarioS	090e930a0f	OmagOFFICE 2.4g1 : - cambio di versione.	2022-08-11 10:45:51 +02:00
NicolaP	f319409261	Inizio gestione lettura direttorio di appartenenza macchina	2022-08-10 09:16:09 +02:00
NicolaP	ad7634f52d	Merge commit 'a788f207af3d2d351992691248c5820d06ae2646' into develop	2022-08-08 11:33:23 +02:00
DarioS	c95fb50006	Merge branch 'master' of https://gitlab.steamware.net/egaltech/OmagOFFICE	2022-08-02 10:01:50 +02:00
Emmanuele Sassi	a788f207af	Merge remote-tracking branch 'origin/develop'	2022-08-02 09:58:48 +02:00
DarioS	f4a8edd421	Merge branch 'develop' of https://gitlab.steamware.net/egaltech/OmagOFFICE	2022-08-02 08:34:10 +02:00
NicolaP	601f66187a	Merge branch 'Features/Manage_Filo_Top_Corner' into develop	2022-07-04 18:07:24 +02:00
NicolaP	a92822bb87	Gestione visualizzazione percorso FiloTop	2022-06-30 19:01:07 +02:00
NicolaP	1a9045a23f	Merge branch 'develop'	2022-06-27 09:48:36 +02:00
NicolaP	fb0d35eddf	Cambio versione	2022-06-27 09:47:50 +02:00
NicolaP	c367f1bfe9	Merge branch 'Features/Manage_Multi_Istances' into develop	2022-06-20 18:17:18 +02:00
NicolaP	d789be4547	Merge branch 'Features/Manage_Engrave' into develop	2022-06-20 18:17:11 +02:00
NicolaP	20e1e9b41c	Merge branch 'Features/Manage_REDO' into develop	2022-06-20 18:16:58 +02:00
NicolaP	b25f065f3c	Merge branch 'Features/SHOTT_Over_Table' into develop	2022-06-20 18:16:46 +02:00
NicolaP	83cf2646cf	Passo alla libreira il nome dello User	2022-06-20 15:08:08 +02:00
NicolaP	11bc92bb10	Getsione comunicazionea DB lastra in lettura	2022-06-16 16:17:35 +02:00
NicolaP	953083e429	Gestione affandamento incisioni da sopra	2022-06-13 12:46:22 +02:00
NicolaP	132990d705	Mantegno attive le lavorazioni della fase corrente	2022-06-09 12:52:41 +02:00
NicolaP	0477c42208	Salvo dimensione sovratavola per ogni macchinata	2022-06-09 12:37:44 +02:00
NicolaP	c11925e90f	Merge remote-tracking branch 'origin/master' into develop	2022-06-08 17:21:26 +02:00
DarioS	d745119195	OmagOFFICE 2.4e4 : - correzione versione.	2022-05-31 00:29:40 +02:00
NicolaP	aa283fd190	Merge branch 'develop'	2022-05-30 15:13:27 +02:00
NicolaP	243125cbb4	Merge remote-tracking branch 'origin/master'	2022-05-30 15:12:22 +02:00
NicolaP	2789051005	Cambio versione	2022-05-30 14:54:55 +02:00
NicolaP	0b13379731	Inseriti messaggi e costanti	2022-05-30 11:02:11 +02:00
NicolaP	6cc7ba8ccd	Gestione StartPoint per tagli WJ InLoop	2022-05-26 17:47:39 +02:00
NicolaP	36674aeb65	Aggiunta gestione grafica per Taglio WJ separato	2022-05-26 16:29:11 +02:00
NicolaP	9aa9b51710	Merge branch 'Features/Manage_Interference_On_Vacuum_Move' into develop	2022-05-25 18:23:15 +02:00
NicolaP	15b87d7911	Merge branch 'Features/WaterJet_Punto_Inizio' into develop	2022-05-25 18:22:47 +02:00
NicolaP	c8bf133113	Gestione comando StartPoint lavorazioni waterjet	2022-05-25 18:21:57 +02:00
NicolaP	faba640eee	Gestione comando per separazione lavorazione WaterJet	2022-05-25 15:19:22 +02:00
DarioS	e9ff1c198b	OmagOFFICE 2.4e3 : - modifiche per prima versione con chiave di rete.	2022-05-17 08:27:56 +02:00
NicolaP	abc304e25c	Verifica interferenze tra grezzi in fase di split	2022-05-02 14:28:08 +02:00
NicolaP	80f4dc6b83	Merge branch 'master' into develop	2022-05-02 11:12:34 +02:00
DarioS	8f5ef91890	OmagOFFICE 2.4e1 : - controlli vari.	2022-05-02 10:29:43 +02:00
NicolaP	2cef4e6fd8	Aggiornamento versione 2.4d1	2022-04-28 16:23:28 +02:00
NicolaP	f2fce7a653	Merge branch 'Features/Limit_Vacuum_On_Stroke'	2022-04-28 16:04:25 +02:00
NicolaP	7581ae0bdb	Miglioramenti scrittura codice e commneti	2022-04-28 14:48:29 +02:00
NicolaP	661ae9f09c	Gestione limiti corsa in fase di manipolazione	2022-04-13 17:51:13 +02:00
NicolaP	44d411819f	Notifica dei limiti di corsa in fase di prelievo pezzi	2022-04-11 19:35:52 +02:00
NicolaP	46134c10b6	Gestione del carico massio delle ventose	2022-04-07 18:31:09 +02:00
NicolaP	36b7ae4843	Migliorata gestione comando Ctrl nella pagina Split	2022-03-21 14:33:43 +01:00
NicolaP	63b4977c39	Migliorara gestione lavorazioni pagina split	2022-03-16 19:27:51 +01:00
NicolaP	ae927719c6	Merge branch 'Features/Multiple_CSV'	2022-03-10 20:43:26 +01:00