Gestione massima dimensione finestra CSV

- corretta gestione angolo di rotazione pezzi con misure pollici (veniva moltiplicato per 25.4 come fosse una lunghezza) presente da ver 2.3b2
- uscendo da gestione grezzo senza alcun grezzo ora si nasconde la eventuale foto.

CompoWindow/CompoWindowVM.vb

@@ -364,6 +364,9 @@ Public Class CompoWindowVM
       ' Cancello layer regioni per selezione buchi
       Pz = EgtGetFirstGroupInGroup(GDB_ID.ROOT)
 
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As String = String.Empty
+
       While Pz <> -1
          ' imposto il contesto corrente
          EgtSetCurrentContext(CompoWindowMap.refCompoSceneHostV.CompoScene.GetCtx())
@@ -513,6 +516,9 @@ Public Class CompoWindowVM
          EgtEraseEmptyParts()
          ' Area dei nuovi pezzi
          Dim dNewArea As Double = 0
+         If nNbr > 1 Then
+            sGUICode = System.Guid.NewGuid.ToString
+         End If
          ' Se esiste il file del pezzo
          If My.Computer.FileSystem.FileExists(sTmpFile) Then
             ' eseguo inserimento
@@ -527,8 +533,15 @@ Public Class CompoWindowVM
                If m_bTrfData Then EgtSetInfo(nId2, "CsvPart", CompoWindowMap.refCompoManagerVM.sTrfOrderCode & "-" & nId2.ToString())
                ' Aggiorno l'area dei nuovi pezzi
                dNewArea += GeomCalc.GetPartArea(nId2)
-               ' Inserisco in parcheggio
+
+               ' assegno l'identificatico del pezzo, se esiste
+               If Not String.IsNullOrEmpty(sGUICode) Then
+                  Dim sPreGuid As String = EstCalc.CreatePreGuidCode(nId2)
+                  EgtSetInfo(nId2, INFO_REFGROUP, sPreGuid & sGUICode)
+               End If
+               ' muovo il pezzo nella prima posizione di parcheggio libera
                EstCalc.StoreOnePart(nId2, True)
+
                ' Aggiungo riferimento e lo inserisco in VeinMatching
                VeinMatching.SetRefOnPart(nId2)
                VeinMatching.AddPart(nId2, True)

Constants/ConstIni.vb

@@ -121,7 +121,7 @@ Module ConstIni
    Public Const K_TEXTCOLOR As String = "TextColor"
    Public Const K_AUTOMATICOPTIMIZE As String = "AutomaticOptimize"
    Public Const K_AUTOMATICMAXTIME As String = "AutomaticMaxTime"
-   Public Const K_DRAGRETTANGLE As String = "DragRettangle"
+   Public Const K_DRAGRETTANGLE As String = "DragRectangle"
 
    Public Const S_SPLIT As String = "Split"
    Public Const K_MOVE_LEV As String = "MoveLevel"
@@ -133,6 +133,7 @@ Module ConstIni
    Public Const K_CSVCURRDIR As String = "CurrDir"
    Public Const K_CSVLASTFILE As String = "LastFile"
    Public Const K_THICKTOLERANCE As String = "ThickTolerance"
+   Public Const K_FULL As String = "Full"
 
    Public Const S_COLORTOSIDEANG As String = "ColorToSideAng"
    Public Const K_CTSA_ENABLE As String = "Enable"

CsvWindow/CsvWindowV.xaml

@@ -10,6 +10,7 @@
    Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
    WindowStartupLocation="CenterOwner"
    MinWidth="270" MinHeight="250"
+   MaxWidth="500"                         
    ResizeMode="NoResize">
 
    <DockPanel Margin="5,5,5,0">

CsvWindow/CsvWindowVM.vb

@@ -1,4 +1,5 @@
 Imports System.Collections.ObjectModel
+Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib5
 
@@ -110,6 +111,8 @@ Public Class CsvWindowVM
 #Region "METHODS"
 
    Private Sub ShowTreeView()
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
       ' Path del file Csv
       Dim TempPath As New Text.StringBuilder(260)
       PathCompactPathEx(TempPath, CsvM.CsvPath, 56, 0)
@@ -118,6 +121,7 @@ Public Class CsvWindowVM
       m_CsvTypeList.Clear()
       Dim sCurrMat As String = String.Empty
       Dim dCurrTh As Double = 0
+      Dim sCurrPath As String = String.Empty
       Dim nCatToNest As Integer = 0
       Dim nCatCount As Integer = 0
       Dim PartCathegory As New CsvPartType("", 0)
@@ -128,15 +132,29 @@ Public Class CsvWindowVM
          If i = 1 Then
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
          ElseIf String.Compare(sCurrMat, CurrPart.m_sMaterial, True) <> 0 Or
+                String.Compare(sCurrPath, CurrPart.m_sPath, True) <> 0 Or
                 Math.Abs(dCurrTh - CurrPart.m_dTh) > 10 * EPS_SMALL Then
-            PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
-                                 " - " & LenToString(dCurrTh, 2) &
-                                 " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+
+            If bFull Then
+               PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
+                                    " - " & LenToString(dCurrTh, 2) &
+                                    " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
+            Else
+               PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+               If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+                  PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+               End If
+            End If
             PartCathegory.IsExpanded = True
             CsvTypeList.Add(PartCathegory)
             sCurrMat = CurrPart.m_sMaterial
             dCurrTh = CurrPart.m_dTh
+            sCurrPath = CurrPart.m_sPath
             PartCathegory = New CsvPartType("", 0)
             nCatToNest = 0
             nCatCount = 0
@@ -150,18 +168,31 @@ Public Class CsvWindowVM
          PartCathegory.CsvPartList.Add(New CsvPartItem(CurrPart.m_sName, i, sCount, sDim, CurrPart.m_bActive))
       Next
       ' Inserisco ultima categoria
-      PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
-                           " - " & LenToString(dCurrTh, 2) &
-                           " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+      If bFull Then
+         PartCathegory.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
+                              " - " & LenToString(dCurrTh, 2) &
+                              " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
+      Else
+         PartCathegory.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+            PartCathegory.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+         End If
+      End If
       PartCathegory.IsExpanded = True
       CsvTypeList.Add(PartCathegory)
       NotifyPropertyChanged("CsvTypeList")
    End Sub
 
    Private Sub UpdateTreeView()
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
       For Each CatItem As CsvPartType In m_CsvTypeList
          Dim sCurrMat As String = String.Empty
          Dim dCurrTh As Double = 0
+         Dim sCurrPath As String = String.Empty
          Dim nCatToNest As Integer = 0
          Dim nCatCount As Integer = 0
          For Each PrtItem As CsvPartItem In CatItem.CsvPartList
@@ -171,12 +202,23 @@ Public Class CsvWindowVM
             PrtItem.sText1 = sCount
             sCurrMat = PartData.m_sMaterial
             dCurrTh = PartData.m_dTh
+            sCurrPath = PartData.m_sPath
             nCatToNest += PartData.m_nToNest
             nCatCount += PartData.m_nCount + PartData.m_nAdd
          Next
-         CatItem.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
-                        " - " & LenToString(dCurrTh, 2) &
-                        " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+         If bFull Then
+            CatItem.Name = If(String.IsNullOrWhiteSpace(sCurrMat), "***", sCurrMat) &
+                           " - " & LenToString(dCurrTh, 2) &
+                           " - " & nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
+         Else
+            CatItem.Name = nCatToNest.ToString() & "/" & nCatCount.ToString()
+            If Not String.IsNullOrWhiteSpace(sCurrPath) Then
+               CatItem.Name &= vbCrLf & Path.GetFileNameWithoutExtension(sCurrPath)
+            End If
+         End If
       Next
    End Sub
 

CurrMachWindow/CurrMachWindowV.xaml

@@ -71,7 +71,7 @@
           <!--Quality-->
           <ComboBox ItemsSource="{Binding CurrWaterjettingQualityList}"
                     SelectedItem="{Binding SelCurrWaterjettingQuality}"
-                    Visibility="{Binding CurrWaterjettingQuality_Visibility}"
+                    Visibility="{Binding CurrWaterjetting_Visibility}"
                     Margin="5,0,0,5"
                     Grid.Column="1">
           </ComboBox>

CurrMachWindow/CurrMachWindowVM.vb

@@ -290,7 +290,7 @@ Public Class CurrMachWindowVM
       End Set
    End Property
 
-   Private m_CurrWaterjetting_Visibility As Visibility
+   Private m_CurrWaterjetting_Visibility As Visibility = Visibility.Collapsed
    Public Property CurrWaterjetting_Visibility As Visibility
       Get
          Return m_CurrWaterjetting_Visibility

DxfImportWindow/DxfImportWindowVM.vb

@@ -710,6 +710,8 @@ Public Class DxfImportWindowVM
          EgtErase(EgtGetFirstNameInGroup(PartId, SELECT_REGION_LAYER))
          PartId = EgtGetNextPart(PartId)
       End While
+      ' identificativo univoico del gruppo di pezzi, se più di un pezzo
+      Dim sGUICode As New List(Of String)
       ' Scrivo testi per nesting
       SideEntityControlVM.WriteSideAngleForNest(DxfImportWindowMap.refDxfImportSceneHostV.ImportDxfScene.GetCtx())
       ' Imposto riferimento sul centro geometrico di ogni pezzo
@@ -732,10 +734,33 @@ Public Class DxfImportWindowVM
       Dim bDirect As Boolean = (GetMainPrivateProfileInt(S_NEST, K_DIRECT, 0) <> 0)
       ' Elimino eventuali precedenti pezzi vuoti
       EgtEraseEmptyParts()
+      ' creo il riferimento
+      If m_PartNum > 1 Then
+         ' per ogni pezze del file DXF creo un gruppo
+         Dim nIdTemp As Integer = EgtGetFirstPart()
+         While nIdTemp <> GDB_ID.NULL
+            Dim sPreGuid As String = CreatePreGuidCode(nIdTemp)
+            sGUICode.Add(sPreGuid & System.Guid.NewGuid.ToString)
+            nIdTemp = EgtGetNextPart(nIdTemp)
+         End While
+      End If
       ' Inserisco i pezzi nell'ambiente principale e recupero Id primo pezzo inserito
       Dim nFirstId As Integer = EgtGetLastPart()
       For nInd As Integer = 1 To m_PartNum
+         Dim nFirst2Id As Integer = EgtGetLastPart()
          EgtInsertFile(sTmpFile)
+         Dim FirstOfImport As Integer = EgtGetNextPart(nFirst2Id)
+         Dim Index As Integer = 1
+         While FirstOfImport <> GDB_ID.NULL And Index <= sGUICode.Count
+            If Not String.IsNullOrEmpty(sGUICode(Index - 1)) Then
+               EgtSetInfo(FirstOfImport, INFO_REFGROUP, sGUICode(Index - 1))
+               Index += 1
+            Else
+               Exit While
+            End If
+            FirstOfImport = EgtGetNextPart(FirstOfImport)
+         End While
+         nFirst2Id = If(nFirst2Id <> GDB_ID.NULL, EgtGetNextPart(nFirst2Id), EgtGetFirstPart())
       Next
       nFirstId = If(nFirstId <> GDB_ID.NULL, EgtGetNextPart(nFirstId), EgtGetFirstPart())
       ' Cancello il file

EgtStoneLib/ConstMach.vb

@@ -33,6 +33,8 @@ Module ConstMach
    Public Const KEY_VACLAY_SEL As String = "Sel"
    ' Info in gruppo layout per angolo di rotazione preferito
    Public Const KEY_VACLAY_PREFROT As String = "PreferredRot"
+   Public Const KEY_VACLAY_PREFVROTXMINUS As String = "PrefVertRotXMinus"
+   Public Const KEY_VACLAY_PREFVROTXPLUS As String = "PrefVertRotXPlus"
    ' Info in gruppo layout per direzione di riferimento ventose per tagli da sotto
    Public Const KEY_VACLAY_DRIPREFDIR As String = "DripRefDir"
    ' Info in asse rotante ventosa per step discreti
@@ -91,6 +93,9 @@ Module ConstMach
    Public Const INFO_RAW_BLOCK = "Block"
    ' Info per numero lastra nel blocco
    Public Const INFO_RAW_SLABNBR = "SlabNbr"
+   ' Info per identificazione gruppo pezzi
+   Public Const INFO_REFGROUP As String = "RefGroup"
+   Public Const INFO_COUNTERLY As String = "CounterPz"
 
    ' Contrassegno di progetto OmagCut
    Public Const NAME_PROJMARK As String = "OmagCut"

EgtStoneLib/CsvM.vb

@@ -12,12 +12,19 @@ Module CsvM
          Return m_sCsvPath
       End Get
    End Property
+   Private m_sFilePath As String = String.Empty
+   Public ReadOnly Property FilePath As String
+      Get
+         Return m_sFilePath
+      End Get
+   End Property
    Private m_CsvPartList As New List(Of CsvPart)
    Public ReadOnly Property CsvPartList As List(Of CsvPart)
       Get
          Return m_CsvPartList
       End Get
    End Property
+
    Private m_bCsvPartListModified As Boolean = False
    Private m_sCompoDir As String = String.Empty
 
@@ -36,12 +43,7 @@ Module CsvM
 
    Public Sub NewCmd()
       ' Salvo lista dei pezzi attuale (se modificata)
-      If Not SaveCsvPartList() Then
-         ' Errore nel salvataggio del file CSV, vuoi continuare lo stesso ? - Errore
-         If MessageBox.Show(EgtMsg(MSG_CSVPAGEUC + 5), EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.YesNo, MessageBoxImage.Error) <> MessageBoxResult.Yes Then
-            Return
-         End If
-      End If
+      SaveCsvPartList()
       ' Pulisco path e lista dei pezzi Csv
       m_sCsvPath = String.Empty
       m_CsvPartList.Clear()
@@ -51,25 +53,33 @@ Module CsvM
    End Sub
 
    Public Sub Open()
-      ' Salvo lista dei pezzi attuale (se modificata)
-      If Not SaveCsvPartList() Then
-         ' Errore nel salvataggio del file CSV, vuoi continuare lo stesso ? - Errore
-         If MessageBox.Show(EgtMsg(MSG_CSVPAGEUC + 5), EgtMsg(MSG_MESSAGEBOX + 1), MessageBoxButton.YesNo, MessageBoxImage.Error) <> MessageBoxResult.Yes Then
-            Return
-         End If
-      End If
       ' Leggo direttorio corrente dei file CSV
       Dim sCurrDir As String = ""
       GetMainPrivateProfileString(S_CSV, K_CSVCURRDIR, "C:\", sCurrDir)
       ' Apro dialogo scelta file
       Dim CsvFileDlg As New Microsoft.Win32.OpenFileDialog()
       If Directory.Exists(sCurrDir) Then CsvFileDlg.InitialDirectory = sCurrDir
-      CsvFileDlg.Filter = "Csv file (*.csv;*.epl)|*.csv;*.epl"
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      Dim sFilterDialog As String = String.Empty
+      Dim sDeniedFiles As List(Of String) = CreateListOfDeniedFiles()
+      If bFull Then
+         sFilterDialog = "Csv file (*.csv;*.epl)|*.csv;*.epl;Merge.epl"
+      Else
+         sFilterDialog = "Csv file (*.csv)|*.csv"
+      End If
+      CsvFileDlg.Filter = sFilterDialog
+
       If Not CsvFileDlg.ShowDialog() Then Return
+
+      ' Salvo lista dei pezzi attuale
+      SaveCsvPartList()
+
       ' Salvo direttorio corrente
       WriteMainPrivateProfileString(S_CSV, K_CSVCURRDIR, Path.GetDirectoryName(CsvFileDlg.FileName))
       ' Apertura file
       Dim sPath = CsvFileDlg.FileName
+      ' se necessario cambio estensione del file
       If String.Compare(Path.GetExtension(sPath), ".CSV", True) = 0 Then
          LoadCsvFile(sPath)
       Else
@@ -77,6 +87,93 @@ Module CsvM
       End If
    End Sub
 
+   Private Function CreateListOfDeniedFiles() As List(Of String)
+      Dim LocalList As New List(Of String)
+      LocalList.Add("MERGE")
+      Dim Index1 As Integer = 0
+      Dim Index2 As Integer = 0
+      For Index1 = 0 To m_CsvPartList.Count - 1
+         Dim sFileName As String = m_CsvPartList(Index1).m_sPath
+         sFileName = Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim()
+         Dim bNewFile As Boolean = True
+         For Index2 = 0 To LocalList.Count - 1
+            If sFileName = LocalList(Index2) Then
+               bNewFile = False
+               Exit For
+            End If
+         Next
+         If bNewFile Then
+            LocalList.Add(Path.GetFileNameWithoutExtension(sFileName).ToUpper.Trim)
+         End If
+      Next
+      Return LocalList
+   End Function
+
+   Private Function LoadCsvFile(sCsvPath As String) As Boolean
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
+      ' Eseguo la lettura del file Csv
+      If Not ReadCsvFile(sCsvPath, LocalPartList) Then
+         'Errore nella lettura del file CSV
+         MessageBox.Show(EgtMsg(91206), "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         Return False
+      End If
+
+      ' Creo un nuovo file che ospitarà il merge de
+      Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+      m_sCsvPath = sNewMergeFile
+      m_sFilePath = m_sCsvPath
+
+      ' Elimino pezzi nulli
+      RemoveWrongParts(LocalPartList)
+      ' Aggiorno
+      If bFull Then
+         MySaveCsvPartList(LocalPartList)
+         ' Salvo come epl
+         SaveCsvPartList()
+         ' Rinomino file originale
+         Dim sBakPath As String = sCsvPath & ".bak"
+         Dim sBakName As String = Path.GetFileName(sBakPath)
+         ' cancello eventuale vecchio backup
+         If My.Computer.FileSystem.FileExists(sBakPath) Then
+            My.Computer.FileSystem.DeleteFile(sBakPath)
+         End If
+         ' eseguo rinomina
+         My.Computer.FileSystem.RenameFile(sCsvPath, sBakName)
+      End If
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
+      Return True
+   End Function
+
+   Private Sub LoadCsvPartList(sFile As String)
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      ' Se Csv semplificato non va letta
+      If Not bFull Then Return
+
+      ' aggiungo i pezzi su una lista temporanea
+      Dim LocalPartList As New List(Of CsvPart)
+
+      ' Lettura del file
+      If ReadCsvPartList(sFile, LocalPartList) Then
+         ' Creo un nuovo file che ospitarà il merge de
+         Dim sNewMergeFile As String = Path.GetDirectoryName(m_sCsvPath) & "\Merge.csv"
+         m_sCsvPath = sNewMergeFile
+         m_sFilePath = m_sCsvPath
+      End If
+      ' Elimino pezzi nulli
+      RemoveWrongParts(LocalPartList)
+      ' attacco i nuovi pezzi alla lista corrente
+      For Each Item As CsvPart In LocalPartList
+         m_CsvPartList.Add(Item)
+      Next
+   End Sub
+
    Public Sub Insert()
       ' Recupero lo spessore della lastra corrente
       Dim dRawHeight As Double = EstCalc.GetRawHeight()
@@ -88,7 +185,7 @@ Module CsvM
       End If
       ' Recupero la tolleranza sullo spessore
       Dim dToler As Double = GetMainPrivateProfileDouble(S_CSV, K_THICKTOLERANCE, 100 * EPS_SMALL)
-      dToler = Math.Max( dToler, 100 * EPS_SMALL)
+      dToler = Math.Max(dToler, 100 * EPS_SMALL)
       ' Creo la lista dei pezzi inseribili nella lastra corrente
       Dim InsPartList As New List(Of CsvPart)
       For i As Integer = 1 To m_CsvPartList.Count()
@@ -174,25 +271,46 @@ Module CsvM
          If Not bMaxDimOnX Then
             Dim dH As Double = Math.Min(0.1 * dDimY, 30)
             Dim nText As Integer = EgtCreateTextAdv(nRegId, New Point3d(dDimX / 2, dDimY - 0.6 * dH, 0), 0, "*TOP*", "", 500, False, dH, 1, 0, INS_POS.MC)
-            EgtSetColor(nText, New Color3d( 0, 0, 0))
+            EgtSetColor(nText, New Color3d(0, 0, 0))
          End If
          ' Aggiusto per lavorazioni
          AdjustFlatPart(nId)
          ' Aggiungo info su CSV di origine
-         EgtSetInfo(nId, INFO_CSV_PATH, m_sCsvPath)
+         EgtSetInfo(nId, INFO_CSV_PATH, CurrPart.m_sPath)
          EgtSetInfo(nId, INFO_CSV_PART, CurrPart.m_sName)
          EgtSetInfo(nId, INFO_CSV_ORD, CurrPart.m_sOrd)
          EgtSetInfo(nId, INFO_CSV_DIST, CurrPart.m_sDist)
          EgtSetInfo(nId, INFO_CSV_MAT, CurrPart.m_sMaterial)
          ' Imposto colore testi
-         EstCalc.SetTextColor( nRegId)
+         EstCalc.SetTextColor(nRegId)
          ' Lo sposto nel gruppo speciale
          EgtRelocate(nId, nIpGrp)
+
+         ' assegno l'identificatico del pezzo, se esiste
+         If Not String.IsNullOrEmpty(CurrPart.m_sRefGuid) Then
+            ' GuidCode dovrebbe contenere 36 caratteri, il precode 5: tot = 41
+            If CurrPart.m_sRefGuid.Count <= 36 Then
+               Dim sPreGuid As String = CreatePreGuidCode(CurrPart.m_nId)
+               CurrPart.m_sRefGuid = sPreGuid & CurrPart.m_sRefGuid
+            End If
+            EgtSetInfo(CurrPart.m_nId, INFO_REFGROUP, CurrPart.m_sRefGuid)
+         End If
+         Dim nRegLayId As Integer = EgtGetFirstNameInGroup(CurrPart.m_nId, NAME_REGION)
+         ' Imposto il colore del pezzo inserito nel progetto
+         EgtSetColor(nRegLayId, CurrPart.m_cColor)
+         Dim EntId As Integer = EgtGetFirstInGroup(nRegLayId)
+         While EntId <> GDB_ID.NULL
+            If EgtGetType(EntId) = GDB_TY.SRF_FRGN Then EgtSetColor(EntId, CurrPart.m_cColor)
+            EntId = EgtGetNext(EntId)
+         End While
+
       Next
       EgtLuaResetGlobVar("CMP")
       EgtLuaResetGlobVar("CMP_Draw")
       ' Provo ad inserire i pezzi
-      Dim bDirect As Boolean = (GetMainPrivateProfileInt(S_CSV, K_CSVDIRECT, 1) <> 0)
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      Dim bDirect As Boolean = bFull And (GetMainPrivateProfileInt(S_CSV, K_CSVDIRECT, 1) <> 0)
       For i As Integer = 1 To InsPartList.Count()
          Dim CurrPart As CsvPart = InsPartList(i - 1)
          While CurrPart.m_nToNest > 0
@@ -229,7 +347,7 @@ Module CsvM
             EgtErase(nId2)
             Return False
          End If
-      ' altrimenti lo metto in parcheggio
+         ' altrimenti lo metto in parcheggio
       Else
          ' Aggiungo riferimento e lo inserisco in VeinMatching
          VeinMatching.SetRefOnPart(nId2)
@@ -270,11 +388,11 @@ Module CsvM
       Dim sName As String = String.Empty
       EgtGetInfo(nId, INFO_CSV_PART, sName)
       ' Verifico che il pezzo appartenga a questo Csv
-      If String.Compare(sCsvPath, m_sCsvPath, True) = 0 Then
+      If SearchCurrCSV(sCsvPath) Then
          ' Cerco il pezzo nella lista dei pezzi
          For i = 1 To m_CsvPartList.Count()
             Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
-            If String.Compare(sName, CurrPart.m_sName, True) = 0 Then
+            If String.Compare(sName, CurrPart.m_sName, True) = 0 And String.Compare(sCsvPath, CurrPart.m_sPath, True) = 0 Then
                ' Se era nel grezzo
                If EgtGetParent(nId) = EstCalc.GetRawId() Then
                   ' Rimuovo le lavorazioni
@@ -282,12 +400,19 @@ Module CsvM
                   ' Rimuovo dal grezzo
                   EgtRemovePartFromRawPart(nId)
                End If
+               ' recupero il Guid del pezzo corrente (potrebbe essere stato modificato a causa di rotazioni quando il pezzo è passato in parcheggio)
+               Dim sCurrRefGuid As String = String.Empty
+               EgtGetInfo(nId, INFO_REFGROUP, sCurrRefGuid)
                ' Eventuale cancellazione per VM
                VeinMatching.OnRemovePart(nId)
                ' Cancello il pezzo
                EgtErase(nId)
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio (se sRefGroup<>"")
+               EstCalc.CountPartInFamily(sCurrRefGuid)
                ' Aggiorno il contatore
                CurrPart.m_nToNest += 1
+               ' ricreo la lista delle famiglie di pezzi presenti in parcheggio
+               GetFamilyGroupInPark()
                ' Esco
                Return True
             End If
@@ -297,10 +422,19 @@ Module CsvM
       Return False
    End Function
 
-   Private Function LoadCsvFile(sCsvPath As String) As Boolean
+   Private Function SearchCurrCSV(ByVal sCSVFile As String) As Boolean
+      For i As Integer = 1 To m_CsvPartList.Count()
+         Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
+         If String.Compare(sCSVFile, CurrPart.m_sPath, True) = 0 Then
+            Return True
+         End If
+      Next
+      Return False
+   End Function
+
+   Private Function ReadCsvFile(sCsvPath As String, ByRef LocalCsvPartList As List(Of CsvPart)) As Boolean
       ' Pulisco path e lista dei pezzi Csv
       m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
       ' Definizione variabili
       EgtLuaCreateGlobTable("CSV")
       EgtLuaSetGlobStringVar("CSV.FILE", sCsvPath)
@@ -308,7 +442,10 @@ Module CsvM
       Dim nErr As Integer = 999
       Dim sReader As String = String.Empty
       GetMainPrivateProfileString(S_CSV, K_READER, "CsvRead.lua", sReader)
-      If EgtLuaExecFile(OmagOFFICEMap.refMainWindowVM.MainWindowM.sCsvAutoDir & "\" & sReader) AndAlso
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      Dim sLuaScript As String = OmagOFFICEMap.refMainWindowVM.MainWindowM.sCsvAutoDir & If(bFull, "\" & sReader, "\CsvSimplRead.lua")
+      If EgtLuaExecFile(sLuaScript) AndAlso
          EgtLuaCallFunction("CSV.Read") Then
          ' Verifica stato di errore
          EgtLuaGetGlobIntVar("CSV.ERR", nErr)
@@ -325,6 +462,7 @@ Module CsvM
       For i As Integer = 1 To nNbr
          Dim OnePart As New CsvPart
          Dim sN As String = i.ToString()
+         OnePart.m_sPath = sCsvPath
          EgtLuaGetGlobStringVar("CSV.NAME" & sN, OnePart.m_sName)
          OnePart.m_bActive = True
          EgtLuaGetGlobStringVar("CSV.ORD" & sN, OnePart.m_sOrd)
@@ -336,63 +474,50 @@ Module CsvM
          EgtLuaGetGlobNumVar("CSV.DIMX" & sN, OnePart.m_dDimX)
          EgtLuaGetGlobNumVar("CSV.DIMY" & sN, OnePart.m_dDimY)
          EgtLuaGetGlobNumVar("CSV.TH" & sN, OnePart.m_dTh)
+         EgtLuaGetGlobNumVar("CSV.A1_" & sN, OnePart.m_dAng1)
+         EgtLuaGetGlobNumVar("CSV.H1_" & sN, OnePart.m_dHeel1)
+         EgtLuaGetGlobNumVar("CSV.A2_" & sN, OnePart.m_dAng2)
+         EgtLuaGetGlobNumVar("CSV.H2_" & sN, OnePart.m_dHeel2)
+         EgtLuaGetGlobNumVar("CSV.A3_" & sN, OnePart.m_dAng3)
+         EgtLuaGetGlobNumVar("CSV.H3_" & sN, OnePart.m_dHeel3)
+         EgtLuaGetGlobNumVar("CSV.A4_" & sN, OnePart.m_dAng4)
+         EgtLuaGetGlobNumVar("CSV.H4_" & sN, OnePart.m_dHeel4)
          OnePart.m_nOriInd = i
+         If OnePart.m_nCount > 1 Then
+            OnePart.m_sRefGuid = System.Guid.NewGuid.ToString
+         End If
          ' inserisco in lista
-         m_CsvPartList.Add(OnePart)
+         LocalCsvPartList.Add(OnePart)
       Next
       EgtLuaResetGlobVar("CSV")
       ' Ordinamento lista dei pezzi (ordine crescente su materiale e spessore)
-      m_CsvPartList.Sort(Function(x, y)
-                            Dim nComp As Integer = String.Compare(x.m_sMaterial, y.m_sMaterial, True)
-                            If nComp = 0 Then
-                               If Math.Abs(x.m_dTh - y.m_dTh) < EPS_SMALL Then
-                                  Return (x.m_nOriInd - y.m_nOriInd)
+      LocalCsvPartList.Sort(Function(x, y)
+                               Dim nComp As Integer = String.Compare(x.m_sMaterial, y.m_sMaterial, True)
+                               If nComp = 0 Then
+                                  If Math.Abs(x.m_dTh - y.m_dTh) < EPS_SMALL Then
+                                     Return (x.m_nOriInd - y.m_nOriInd)
+                                  Else
+                                     Return CInt(Math.Ceiling(x.m_dTh - y.m_dTh))
+                                  End If
                                Else
-                                  Return CInt(Math.Ceiling(x.m_dTh - y.m_dTh))
+                                  Return nComp
                                End If
-                            Else
-                               Return nComp
-                            End If
-                         End Function)
-      ' Salvo come epl
-      m_bCsvPartListModified = True
-      SaveCsvPartList()
-      ' Rinomino file originale
-      Dim sBakPath As String = sCsvPath & ".bak"
-      Dim sBakName As String = Path.GetFileName(sBakPath)
-      ' cancello eventuale vecchio backup
-      If My.Computer.FileSystem.FileExists(sBakPath) Then
-         My.Computer.FileSystem.DeleteFile(sBakPath)
-      End If
-      ' eseguo rinomina
-      My.Computer.FileSystem.RenameFile(sCsvPath, sBakName)
+                            End Function)
       Return True
    End Function
 
-   Public Function SaveCsvPartList() As Boolean
-      ' Se non c'è nulla di attivo, non faccio alcunché
-      If String.IsNullOrEmpty(m_sCsvPath) Then
-         EgtOutLog("CSV List Save Skipped : missing")
-         Return True
-      End If
-      ' Se lista non modificata, non faccio alcunchhé
-      If Not m_bCsvPartListModified Then
-         EgtOutLog("CSV List Save Skipped : not modified")
-         Return True
-      End If
-      ' Path del file
-      Dim sFile As String = Path.ChangeExtension(m_sCsvPath, ".epl")
-      ' Gestione file
+   Public Function WriteCsvPartList(sFile As String, sCsvPath As String, LocalCsvPartList As List(Of CsvPart)) As Boolean
       Try
          ' Apro file
          Dim Writer As New IO.StreamWriter(sFile, False)
          ' Intestazione
          Writer.WriteLine("[General]")
-         Writer.WriteLine("Path=" & m_sCsvPath)
+         Writer.WriteLine("Path=" & sCsvPath)
          ' Ciclo sui pezzi
-         For i As Integer = 1 To m_CsvPartList.Count()
-            Dim CurrPart As CsvPart = m_CsvPartList(i - 1)
+         For i As Integer = 1 To LocalCsvPartList.Count()
+            Dim CurrPart As CsvPart = LocalCsvPartList(i - 1)
             Writer.WriteLine("[P" & i.ToString() & "]")
+            Writer.WriteLine("Path=" & CurrPart.m_sPath)
             Writer.WriteLine("Nam=" & CurrPart.m_sName)
             Writer.WriteLine("Ord=" & CurrPart.m_sOrd)
             Writer.WriteLine("Dist=" & CurrPart.m_sDist)
@@ -405,7 +530,16 @@ Module CsvM
             Writer.WriteLine("DX=" & DoubleToString(CurrPart.m_dDimX, 4))
             Writer.WriteLine("DY=" & DoubleToString(CurrPart.m_dDimY, 4))
             Writer.WriteLine("Th=" & DoubleToString(CurrPart.m_dTh, 4))
+            Writer.WriteLine("A1=" & DoubleToString(CurrPart.m_dAng1, 4))
+            Writer.WriteLine("H1=" & DoubleToString(CurrPart.m_dHeel1, 4))
+            Writer.WriteLine("A2=" & DoubleToString(CurrPart.m_dAng2, 4))
+            Writer.WriteLine("H2=" & DoubleToString(CurrPart.m_dHeel2, 4))
+            Writer.WriteLine("A3=" & DoubleToString(CurrPart.m_dAng3, 4))
+            Writer.WriteLine("H3=" & DoubleToString(CurrPart.m_dHeel3, 4))
+            Writer.WriteLine("A4=" & DoubleToString(CurrPart.m_dAng4, 4))
+            Writer.WriteLine("H4=" & DoubleToString(CurrPart.m_dHeel4, 4))
             Writer.WriteLine("OIn=" & CurrPart.m_nOriInd.ToString())
+            Writer.WriteLine("Guid=" & CurrPart.m_sRefGuid)
          Next
          ' Terminatore
          Writer.WriteLine("[END]")
@@ -416,18 +550,80 @@ Module CsvM
          ' Registro in ini path
          WriteMainPrivateProfileString(S_CSV, K_CSVLASTFILE, sFile)
          Return True
-      ' Errore
+         ' Errore
       Catch ex As Exception
          EgtOutLog("CSV List error writing " & sFile)
          Return False
       End Try
    End Function
 
-   Private Function LoadCsvPartList(sFile As String) As Boolean
-      ' Pulisco path e lista dei pezzi Csv
-      m_sCsvPath = String.Empty
-      m_CsvPartList.Clear()
-      ' Gestione file
+   ' dato l'elenco completo dei file salvo ogni singolo epl 
+   Friend Function WriteCsvMergePartList(CsvPartList As List(Of CsvPart)) As Boolean
+      Dim bOk As Boolean = True
+      Dim LocalPartList As New List(Of CsvPart)
+      Dim Index As Integer = 0
+      ' devo dividere la lista in tante parti quanti sono i file che lo costituiscono
+      While Index < CsvPartList.Count
+         Dim CurrFile As String = CsvPartList(Index).m_sPath
+         Dim sFile As String = Path.ChangeExtension(CurrFile, ".epl")
+         LocalPartList.Clear()
+         While CurrFile = CsvPartList(Index).m_sPath
+            LocalPartList.Add(CsvPartList(Index))
+            Index += 1
+            ' se terminata la lista
+            If Index = CsvPartList.Count Then
+               Exit While
+            End If
+         End While
+         ' salvo l'elenco corrente
+         bOk = WriteCsvPartList(sFile, CurrFile, LocalPartList) And bOk
+      End While
+      Return bOk
+   End Function
+
+   Friend Sub SaveCsvPartList()
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      ' Se Csv semplificato non va salvata
+      If Not bFull Then Return
+      ' Se non c'è nulla di attivo, non faccio alcunché
+      If String.IsNullOrEmpty(m_sCsvPath) Then
+         EgtOutLog("CSV List missing")
+         Return
+      End If
+      ' Path del file
+      Dim sFile As String = Path.ChangeExtension(m_sFilePath, ".epl")
+      ' Scrittura dei file
+      If WriteCsvMergePartList(m_CsvPartList) Then
+         ' Scrittura dei file Merge
+         If WriteCsvPartList(sFile, m_sCsvPath, m_CsvPartList) Then
+            WriteMainPrivateProfileString(S_CSV, K_CSVLASTFILE, sFile)
+         End If
+      End If
+   End Sub
+
+   Friend Sub MySaveCsvPartList(ByVal CurrPartList As List(Of CsvPart))
+      Dim bFull = OmagOFFICEMap.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.CSV_AUTO) And
+                (GetMainPrivateProfileInt(S_CSV, K_FULL, 1) <> 0)
+      ' Se Csv semplificato non va salvata
+      If Not bFull Then Return
+      Dim sCurrPath As String = String.Empty
+      ' recupero dalla lista il nome del file corrente
+      For Each Item As CsvPart In CurrPartList
+         sCurrPath = Item.m_sPath
+      Next
+      ' se non trov il nome del file assocciato all'elenco di pezzi esco
+      If String.IsNullOrEmpty(sCurrPath) Then
+         EgtOutLog("CSV Curr list missing")
+         Return
+      End If
+      ' Path del file
+      Dim sFile As String = Path.ChangeExtension(sCurrPath, ".epl")
+      ' Scrittura del file
+      WriteCsvPartList(sFile, sCurrPath, CurrPartList)
+   End Sub
+
+   Private Function ReadCsvPartList(sFile As String, LocalCsvPartList As List(Of CsvPart)) As Boolean
       Try
          ' Apro file
          Dim Reader As New IO.StreamReader(sFile, False)
@@ -456,7 +652,7 @@ Module CsvM
                ' se esiste pezzo precedente, lo salvo
                If nI > 1 Then
                   ' inserisco in lista
-                  m_CsvPartList.Add(OnePart)
+                  LocalCsvPartList.Add(OnePart)
                End If
                ' predisposizioni per prossimo pezzo
                nI += 1
@@ -466,7 +662,9 @@ Module CsvM
             Else
                Dim sItems() As String = sLine.Split("=".ToCharArray)
                If sItems.Count() >= 2 Then
-                  If sItems(0) = "Nam" Then
+                  If sItems(0) = "Path" Then
+                     OnePart.m_sPath = sItems(1)
+                  ElseIf sItems(0) = "Nam" Then
                      OnePart.m_sName = sItems(1)
                   ElseIf sItems(0) = "Ord" Then
                      OnePart.m_sOrd = sItems(1)
@@ -490,8 +688,26 @@ Module CsvM
                      StringToDouble(sItems(1), OnePart.m_dDimY)
                   ElseIf sItems(0) = "Th" Then
                      StringToDouble(sItems(1), OnePart.m_dTh)
+                  ElseIf sItems(0) = "A1" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng1)
+                  ElseIf sItems(0) = "H1" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel1)
+                  ElseIf sItems(0) = "A2" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng2)
+                  ElseIf sItems(0) = "H2" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel2)
+                  ElseIf sItems(0) = "A3" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng3)
+                  ElseIf sItems(0) = "H3" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel3)
+                  ElseIf sItems(0) = "A4" Then
+                     StringToDouble(sItems(1), OnePart.m_dAng4)
+                  ElseIf sItems(0) = "H4" Then
+                     StringToDouble(sItems(1), OnePart.m_dHeel4)
                   ElseIf sItems(0) = "OIn" Then
                      StringToInt(sItems(1), OnePart.m_nOriInd)
+                  ElseIf sItems(0) = "Guid" Then
+                     OnePart.m_sRefGuid = sItems(1).Trim
                   End If
                End If
             End If
@@ -502,18 +718,37 @@ Module CsvM
          ' Dichiaro lista non modificata
          m_bCsvPartListModified = False
          Return True
-      ' Errore
+         ' Errore
       Catch ex As Exception
          EgtOutLog("Error reading " & sFile)
          Return False
       End Try
    End Function
 
+   Friend Function RemoveNotToNestParts(ByRef CsvPartList As List(Of CsvPart)) As Boolean
+      For i As Integer = CsvPartList.Count() - 1 To 0 Step -1
+         If CsvPartList(i).m_nToNest = 0 Then
+            CsvPartList.RemoveAt(i)
+         End If
+      Next
+      Return True
+   End Function
+
+   Friend Function RemoveWrongParts(ByRef CsvPartList As List(Of CsvPart)) As Boolean
+      For i As Integer = CsvPartList.Count() - 1 To 0 Step -1
+         If Not CsvPartList(i).m_bIsRect Or CsvPartList(i).m_dDimX < EPS_SMALL Or CsvPartList(i).m_dDimY < EPS_SMALL Then
+            CsvPartList.RemoveAt(i)
+         End If
+      Next
+      Return True
+   End Function
+
 #End Region    ' METHODS
 
 End Module
 
 Public Class CsvPart
+   Public m_sPath As String = String.Empty
    Public m_sName As String = String.Empty
    Public m_sOrd As String = String.Empty
    Public m_sDist As String = String.Empty
@@ -526,6 +761,18 @@ Public Class CsvPart
    Public m_dDimX As Double = 0
    Public m_dDimY As Double = 0
    Public m_dTh As Double = 0
+   Public m_dAng1 As Double = 0
+   Public m_dHeel1 As Double = 0
+   Public m_dAng2 As Double = 0
+   Public m_dHeel2 As Double = 0
+   Public m_dAng3 As Double = 0
+   Public m_dHeel3 As Double = 0
+   Public m_dAng4 As Double = 0
+   Public m_dHeel4 As Double = 0
    Public m_nOriInd As Integer = 0
    Public m_nId As Integer = GDB_ID.NULL
+   ' definsco il riferimento al gruppo
+   Public m_sRefGuid As String = System.Guid.NewGuid.ToString
+   ' definisco il colore del gruppo che sto inserendo
+   Public m_cColor As Color3d = CompoColor(IniFile.m_sIniFile)
 End Class

EgtStoneLib/EstCalc.vb

@@ -51,6 +51,68 @@ Module EstCalc
       End If
    End Function
 
+#Region "PreGuidCode"
+
+   ' recupero i primi 5 caratteri della stringa
+   Friend Function GetPreGuidCode(sGuidCode As String) As String
+      If sGuidCode.Count > 5 Then
+         Return sGuidCode(0) & sGuidCode(1) & sGuidCode(2) & sGuidCode(3) & sGuidCode(4)
+      End If
+      Return String.Empty
+   End Function
+
+   ' sostituisce i primi 5 caratteri della stringa con qualle passata
+   Friend Function UppDateGuidCode(ByRef sGuidCode As String, sPreGuidCode As String) As Boolean
+      If sPreGuidCode.Count = 5 Then
+         sGuidCode = sGuidCode.Remove(0, 5)
+         sGuidCode = sPreGuidCode & sGuidCode
+         Return True
+      End If
+      Return False
+   End Function
+
+   ' restituisce 5 caratteri 
+   Friend Function CreatePreGuidCode(nId As Integer) As String
+      ' recupero il frame dell'oggetto
+      Dim frGlobFrame As New Frame3d
+      If Not EgtGetGroupGlobFrame(nId, frGlobFrame) Then
+         Return String.Empty
+      End If
+      ' recupero il suo versore
+      Dim vtX As Vector3d = frGlobFrame.VersX
+      Dim Len As Double
+      Dim AngV As Double
+      Dim AngH As Double
+      vtX.ToSpherical(Len, AngV, AngH)
+      ' costruisco il codice (6 caratteri!) che identifica la posizione del pezzo in parcheggio
+      Dim sPreGuid As String = GetDirectionCode(AngH)
+      Return sPreGuid
+   End Function
+
+   Friend Function GetDirectionCode(dVal As Double) As String
+      Dim bIsNegative As Boolean = False
+      If dVal < 0 Then
+         dVal = dVal + (-1)
+         bIsNegative = True
+      End If
+      Dim sVal As String = DoubleToString(dVal * 1000, 0)
+      Dim nCount As Integer = sVal.Count
+      For Index As Integer = 1 To 4 - nCount
+         sVal = "0" & sVal
+      Next
+      Dim vVal As Char() = {"+"c, "1"c, "0"c, "0"c, "0"c}
+      If bIsNegative Then
+         vVal = {"-"c, sVal(0), sVal(1), sVal(2), sVal(3)}
+      Else
+         vVal = {"+"c, sVal(0), sVal(1), sVal(2), sVal(3)}
+      End If
+      ' ricostruisco la stringa dotata di segno
+      sVal = vVal(0) & vVal(1) & vVal(2) & vVal(3) & vVal(4)
+      Return sVal
+   End Function
+
+#End Region    ' PreGiudCode
+
    '--------------------------------------------------------------------------------------------------
    Private m_nRawId As Integer = GDB_ID.NULL
    Public Function GetRawId() As Integer
@@ -626,6 +688,16 @@ Module EstCalc
       End If
       ' Gestione risultato nesting
       If bFit Then
+         '---------------------- COUNTER PART ----------------------
+         Dim sRefGroup As String = String.Empty
+         If EgtGetInfo(nId, INFO_REFGROUP, sRefGroup) Then
+            ' spengo il layer che contiene il contatore
+            Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nId, INFO_COUNTERLY)
+            EgtSetStatus(nCounterLayer, GDB_ST.OFF)
+            ' aggiorno il layer che indica il numero di pezzi in parcheggio
+            CountPartInFamily(sRefGroup)
+         End If
+         '---------------------- COUNTER PART ----------------------
          ' Eventuale aggiunta solido per taglio da sotto
          UpdateSolidForDrip(nId)
          Return True
@@ -702,12 +774,198 @@ Module EstCalc
       Return True
    End Function
 
+#Region "Manager Counter Part"
+
+   ' lista delle famiglie di pezzi in parcheggio
+   Public m_ListOfGroupInPark As New List(Of FamilyPart)
+   ' se seleniozato il layer CounterPz
+   Public m_bIsCounterLy As Boolean = False
+   Public m_nCurrNubrOfParts As Integer = 0
+
+   ' creo la lista delle famiglie che popolano il parcheggio
+   Public Sub GetFamilyGroupInPark()
+      m_ListOfGroupInPark.Clear()
+      Dim nIdInPark As Integer = EgtGetFirstPart()
+      While nIdInPark <> GDB_ID.NULL
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         If EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup) Then
+            Dim bExists As Boolean = False
+            For Each sItem As FamilyPart In m_ListOfGroupInPark
+               If sRefGroup = sItem.sRefGuid Then
+                  bExists = True
+                  Exit For
+               End If
+            Next
+            If Not bExists Then
+               m_ListOfGroupInPark.Add(New FamilyPart(sRefGroup, nIdInPark))
+            End If
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+   End Sub
+
+   Public Sub CountPartInFamily(sRefGuid As String)
+      If String.IsNullOrEmpty(sRefGuid) Then Return
+      Dim nCount As Integer = 0
+      Dim nIdInPark As Integer = EgtGetFirstPart()
+      ' conto il nuero di pezzi del gruppo inidcato
+      While nIdInPark <> GDB_ID.NULL
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup)
+         If sRefGroup = sRefGuid Then
+            nCount += 1
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+      ' aggiorno il contatore dei pezzi del gruppo
+      nIdInPark = EgtGetFirstPart()
+      While nIdInPark <> GDB_ID.NULL
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup)
+         If sRefGroup = sRefGuid Then
+            Dim nId As Integer = EgtGetFirstNameInGroup(nIdInPark, INFO_COUNTERLY)
+            If nId <> GDB_ID.NULL Then
+               Dim m_IdCounterTextas As Integer = EgtGetFirstInGroup(nId)
+               EgtModifyText(m_IdCounterTextas, "# " & nCount.ToString)
+            End If
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+   End Sub
+
+   Public Sub SelectPartInFaimily(sRefGuid As String, nNbrOfSelection As Integer)
+      ' aggiorno il contatore dei pezzi del gruppo
+      Dim nIdInPark As Integer = EgtGetFirstPart()
+      Dim nCounter As Integer = 0
+      While nIdInPark <> GDB_ID.NULL And nCounter < nNbrOfSelection
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup)
+         If sRefGroup = sRefGuid Then
+            EgtSelectObj(nIdInPark)
+            nCounter += 1
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+   End Sub
+
+   Public Sub DeselectPartInFaimily(sRefGuid As String)
+      ' aggiorno il contatore dei pezzi del gruppo
+      Dim nIdInPark As Integer = EgtGetFirstPart()
+      While nIdInPark <> GDB_ID.NULL
+         If IsInRaw(nIdInPark) Then
+            nIdInPark = EgtGetNextPart(nIdInPark)
+            Continue While
+         End If
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(nIdInPark, INFO_REFGROUP, sRefGroup)
+         If sRefGroup = sRefGuid Then
+            EgtDeselectObj(nIdInPark)
+         End If
+         nIdInPark = EgtGetNextPart(nIdInPark)
+      End While
+   End Sub
+
+   Public Function ParkInGroupFamily(nId As Integer) As Boolean
+      ' se pezzo appartenente ad un gruppo
+      Dim sRefGroup As String = String.Empty
+      Dim Element As FamilyPart
+      If EgtGetInfo(nId, INFO_REFGROUP, sRefGroup) Then
+         ' verifico se esiste un pezzo dello stesso gruppo in parcheggio
+         Dim nNewLayer As Integer
+         Dim ptMin As Point3d
+         Dim ptMax As Point3d
+         For Each sItem As FamilyPart In m_ListOfGroupInPark
+            If sRefGroup = sItem.sRefGuid Then
+               ' creo un nuovo layer per contenere l'informazione del numero di pezzi da inserire
+               If EgtGetFirstNameInGroup(nId, INFO_COUNTERLY) = GDB_ID.NULL Then
+                  nNewLayer = EgtCreateGroup(nId)
+                  EgtSetName(nNewLayer, INFO_COUNTERLY)
+                  EgtSetColor(nNewLayer, New Color3d(0, 0, 0))
+                  EgtGetBBox(nId, GDB_BB.STANDARD, ptMin, ptMax)
+                  EgtCreateText(nNewLayer, New Point3d((ptMin.x + ptMax.x) / 2, ptMin.y - sItem.nHText - 20, ptMin.z), "# ???", sItem.nHText, GDB_RT.LOC)
+               Else
+                  ' Accendo il layer che contiene il contatore
+                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nId, INFO_COUNTERLY)
+                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
+               End If
+
+               ' calcolo lo spostamento del pezzo
+               Dim PtMinInRaw As Point3d
+               Dim PtMaxInRaw As Point3d
+               EgtGetBBoxGlob(nId, GDB_BB.STANDARD, PtMinInRaw, PtMaxInRaw)
+               Dim vtMoveToStorage As New Vector3d
+               vtMoveToStorage = sItem.PtStorage() - PtMinInRaw
+               EgtMove(nId, vtMoveToStorage, GDB_RT.GLOB)
+
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio
+               CountPartInFamily(sRefGroup)
+               Return True
+            End If
+         Next
+         ' inserisco il primo pezzo del gruppo nel parcheggio
+         Element = New FamilyPart(sRefGroup, nId)
+         m_ListOfGroupInPark.Add(Element)
+         ' creo un nuovo layer per contenere l'informazione del numero di pezzi da inserire
+         If EgtGetFirstNameInGroup(nId, INFO_COUNTERLY) = GDB_ID.NULL Then
+            nNewLayer = EgtCreateGroup(nId)
+            EgtSetName(nNewLayer, INFO_COUNTERLY)
+            EgtSetColor(nNewLayer, New Color3d(0, 0, 0))
+            EgtGetBBox(nId, GDB_BB.STANDARD, ptMin, ptMax)
+            ' posso migliorarei lposizioanamento in funzione della dimensione della scritta...
+            EgtCreateText(nNewLayer, New Point3d((ptMin.x + ptMax.x) / 2, ptMin.y - Element.nHText - 20, ptMin.z), "# 1", Element.nHText, GDB_RT.LOC)
+         Else
+            ' Accendo il layer che contiene il contatore
+            Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nId, INFO_COUNTERLY)
+            EgtSetStatus(nCounterLayer, GDB_ST.ON_)
+            ' aggiorno il layer che indica il numero di pezzi in parcheggio
+            CountPartInFamily(sRefGroup)
+         End If
+      End If
+      Return False
+   End Function
+
+   ' verifico se il pezzo ha un gruppo che contiene le informazioni per il taglio
+   Public Function IsInRaw(nIdGroup As Integer) As Boolean
+      ' verifico che il pezzo sia veramente uin parcheggio
+      Dim nPV As Integer = EgtGetFirstNameInGroup(nIdGroup, "PV")
+      If nPV <> GDB_ID.NULL Then
+         ' verifico che non ci siano delle lavorazioni
+         If EgtGetFirstInGroup(nPV) <> GDB_ID.NULL Then
+            Return True
+         End If
+      End If
+      Return False
+   End Function
+#End Region    ' Manager Counter Part
+
    Public Function StoreOnePart(ByVal nId As Integer, Optional ByVal bForced As Boolean = False) As Boolean
       ' Se pezzo in grezzo, metto in parcheggio (sempre possibile)
       If bForced OrElse
          (m_nRawId <> GDB_ID.NULL AndAlso EgtGetParent(nId) = m_nRawId) Then
          ' Ripristino lo stato originale
-         PreRemoveOnePart( nId)
+         PreRemoveOnePart(nId)
+
+         '---------------------- COUNTER PART ----------------------
+         ' se esiste almento un pezzo del gruppo in parcheggio esco
+         If ParkInGroupFamily(nId) Then Return True
+         '---------------------- COUNTER PART ----------------------
+
          ' Parcheggio
          PackPartInStore(nId)
          ' Aggiusto la posizione in Z
@@ -730,7 +988,8 @@ Module EstCalc
       ' Parcheggio
       Const STORE_LARGH As Double = 6000
       Const STORE_DIST As Double = 200
-      Const STORE_OFFS As Double = 20
+      ' 40 il Font usato per indicare il numero di pezzi in parcheggio "# N"
+      Const STORE_OFFS As Double = 20 + 40 + 20
       Dim dStXmin As Double = b3Tab.Min().x - 0.5 * (STORE_LARGH - b3Tab.DimX())
       Return EgtPackBox(nId, dStXmin, -INFINITO, dStXmin + STORE_LARGH, b3Tab.Min().y - STORE_DIST, STORE_OFFS, False)
    End Function
@@ -831,3 +1090,4 @@ Module EstCalc
    End Function
 
 End Module
+

EgtStoneLib/VacuumCups.vb

@@ -8,6 +8,8 @@ Module VacuumCups
    Private m_nVacId As Integer = GDB_ID.NULL
    Private m_nRefId As Integer = GDB_ID.NULL
    Private m_dPreferredRot As Double = 0
+   Private m_dPrefVertRotXMinus As Double = 0
+   Private m_dPrefVertRotXPlus As Double = 0
    Private m_dDripRefAng As Double = 0
 
    ' Nome del gruppo temporaneo per le ventose
@@ -73,7 +75,10 @@ Module VacuumCups
       m_nVacId = EgtCopyGlob(nLayId, m_nTempId)
       If m_nVacId = GDB_ID.NULL Then Return False
       ' Angolo di rotazione preferito
-      EgtGetInfo( m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFROT, m_dPreferredRot)
+      ' Angoli di rotazione preferiti per ventosa in verticale (lungo Y) a sinistra e a destra del centro tavola
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXMINUS, m_dPrefVertRotXMinus)
+      EgtGetInfo(m_nVacId, KEY_VACLAY_PREFVROTXPLUS, m_dPrefVertRotXPlus)
       ' Direzione di riferimento per tagli Drip
       EgtGetInfo( m_nVacId, KEY_VACLAY_DRIPREFDIR, m_dDripRefAng)
       ' Nascondo il gruppo ma rendo visibili le curve di contorno delle ventose
@@ -363,6 +368,9 @@ Module VacuumCups
       If b3Vac.IsEmpty() Then Return INFINITO
       ' Se box maggiore di quello del pezzo, scarto soluzione
       If b3Vac.Radius() > b3Raw.Radius() Then Return INFINITO
+      ' Recupero l'area della tavola
+      Dim b3Tab As New BBox3d
+      EgtGetTableArea(1, b3Tab)
       ' Determino il movimento
       vtMove = ptRawCen - b3Vac.Center()
       b3Vac.Move(vtMove)
@@ -374,11 +382,19 @@ Module VacuumCups
          frMinRect.VersX().ToSpherical(dLen, dAngVertDeg, dAngOrizzDeg)
          dRotAngDeg = dAngOrizzDeg
          If b3Vac.DimY() > b3Vac.DimX() + EPS_SMALL Then dRotAngDeg -= 90
+         Dim dPreferredRot As Double = m_dPreferredRot
+         If Math.Abs(dRotAngDeg - 90) < 45 Or Math.Abs(dRotAngDeg - 270) < 45 Then
+            If frMinRect.Orig().x < b3Tab.Center().x Then
+               dPreferredRot = m_dPrefVertRotXMinus
+            Else
+               dPreferredRot = m_dPrefVertRotXPlus
+            End If
+         End If
          Dim dAngDelta As Double = If( Math.Abs( b3Vac.DimY() - b3Vac.DimX()) < 10 * EPS_SMALL, 90, 180)
-         While dRotAngDeg - m_dPreferredRot >= dAngDelta / 2 
+         While dRotAngDeg - dPreferredRot >= dAngDelta / 2
             dRotAngDeg -= dAngDelta
          End While
-         While dRotAngDeg - m_dPreferredRot <= -dAngDelta / 2
+         While dRotAngDeg - dPreferredRot <= -dAngDelta / 2
             dRotAngDeg += dAngDelta
          End While
       Else
@@ -431,8 +447,6 @@ Module VacuumCups
       ptRef.Move(vtMove)
       ptRef.Rotate(ptRotCen, Vector3d.Z_AX(), dRotAngDeg)
       ' Ne calcolo la distanza dal centro della tavola
-      Dim b3Tab As New BBox3d
-      EgtGetTableArea(1, b3Tab)
       Dim dDist As Double = Point3d.DistXY(ptRef, b3Tab.Center())
       Return dDist
    End Function

MainWindow/MainWindowM.vb

@@ -195,8 +195,8 @@ Public Class MainWindowM
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace( sNestKey)
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2401, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(9423, 2401, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(9423, 2402, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(9423, 2402, 1, m_nKeyOptions)
       ' Verifico abilitazione prodotto
       Dim bProd As Boolean = GetKeyOption(KEY_OPT.OFFICE_BASE)
       ' Inizializzazione generale di EgtInterface

My Project/AssemblyInfo.vb

@@ -69,6 +69,6 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")> 
 
-<Assembly: AssemblyVersion("2.4.1.3")>
-<Assembly: AssemblyFileVersion("2.4.1.3")>
+<Assembly: AssemblyVersion("2.4.2.3")>
+<Assembly: AssemblyFileVersion("2.4.2.3")>
 

OmagOFFICE.vbproj

@@ -255,6 +255,10 @@
       <DependentUpon>SplitModeV.xaml</DependentUpon>
     </Compile>
     <Compile Include="OptionPanel\MachiningTab\SplitModeVM.vb" />
+    <Compile Include="OptionPanel\NestingTab\MultiSelectionV.xaml.vb">
+      <DependentUpon>MultiSelectionV.xaml</DependentUpon>
+    </Compile>
+    <Compile Include="OptionPanel\NestingTab\MultiSelectionVM.vb" />
     <Compile Include="OptionPanel\NestingTab\NestingTabV.xaml.vb">
       <DependentUpon>NestingTabV.xaml</DependentUpon>
     </Compile>
@@ -437,6 +441,10 @@
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>
     </Page>
+    <Page Include="OptionPanel\NestingTab\MultiSelectionV.xaml">
+      <SubType>Designer</SubType>
+      <Generator>MSBuild:Compile</Generator>
+    </Page>
     <Page Include="OptionPanel\NestingTab\NestingTabV.xaml">
       <SubType>Designer</SubType>
       <Generator>MSBuild:Compile</Generator>

OptionPanel/NestingTab/MultiSelectionV.xaml

@@ -0,0 +1,41 @@
+<EgtWPFLib5:EgtCustomWindow x:Class="MultiSelectionV"
+   xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
+   xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
+   xmlns:OmagOFFICE="clr-namespace:OmagOFFICE"
+   xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
+   Title="{Binding TitleMsg}"
+   IsMinimizable="False"
+   IsClosable="False"
+   ShowInTaskbar="False"
+   Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
+   WindowStartupLocation="CenterOwner"
+   Width="270" Height="150"
+   ResizeMode="NoResize">
+
+    <DockPanel Margin="5,5,5,0">
+
+        <UniformGrid Columns="2" 
+                     DockPanel.Dock="Top"
+                     Margin="0,15,0,15">
+            <TextBlock Text="{Binding SelectionMsg}"/>
+            <TextBox Text="{Binding nNbrOfParts}"/>
+        </UniformGrid>
+
+        <UniformGrid Columns="4"
+                   DockPanel.Dock="Bottom"
+                   Margin="25,0,25,5">
+            <Button Command="{Binding OkCommand}"
+                    Style="{StaticResource OptionPanel_TextButton}"
+                    Content="{Binding OkMsg}">
+            </Button>
+            <ToggleButton Visibility="Hidden" />
+            <ToggleButton Visibility="Hidden" />
+            <Button Command="{Binding CancelCommand}"
+                    Style="{StaticResource OptionPanel_TextButton}"
+                    Content="{Binding CancelMsg}">
+            </Button>
+        </UniformGrid>
+
+    </DockPanel>
+
+    </EgtWPFLib5:EgtCustomWindow>

OptionPanel/NestingTab/MultiSelectionV.xaml.vb

@@ -0,0 +1,15 @@
+Public Class MultiSelectionV
+
+   Private WithEvents m_MultiSelectionVM As MultiSelectionVM
+
+   Sub New(Owner As Window, MultiSelVM As MultiSelectionVM)
+      MyBase.New(Owner)
+      ' This call is required by the designer.
+      InitializeComponent()
+      Me.DataContext = MultiSelVM
+      ' Assegno al riferimento locale al VM il VM preso dal DataContext
+      m_MultiSelectionVM = MultiSelVM
+      Me.Show()
+   End Sub
+
+End Class

OptionPanel/NestingTab/MultiSelectionVM.vb

@@ -0,0 +1,97 @@
+Imports EgtUILib
+Imports EgtWPFLib5
+
+Public Class MultiSelectionVM
+   Inherits VMBase
+
+   Private m_sRefGuidOfPart As String = String.Empty
+
+   Public ReadOnly Property TitleMsg As String
+      Get
+         Return "Multiple selection"
+      End Get
+   End Property
+   Public ReadOnly Property SelectionMsg As String
+      Get
+         Return "Number of Parts"
+      End Get
+   End Property
+
+   Public ReadOnly Property OkMsg As String
+      Get
+         Return "Ok"
+      End Get
+   End Property
+
+   Public ReadOnly Property CancelMsg As String
+      Get
+         Return "Cancel"
+      End Get
+   End Property
+
+   Private m_MultiSelectionV As MultiSelectionV
+   Public Sub SetMultiSelectionV(MultiSel As MultiSelectionV)
+      m_MultiSelectionV = MultiSel
+   End Sub
+
+   Private m_nNbrOfParts As Integer
+   Public Property nNbrOfParts As String
+      Get
+         Return m_nNbrOfParts.ToString
+      End Get
+      Set(value As String)
+         Dim nVal As Integer = 0
+         StringToInt(value, nVal)
+         m_nNbrOfParts = nVal
+         NotifyPropertyChanged("nNbrOfParts")
+      End Set
+   End Property
+
+   Private m_cmdOk As ICommand
+   Private m_cmdCancel As ICommand
+
+   Public ReadOnly Property OkCommand As ICommand
+      Get
+         If m_cmdOk Is Nothing Then
+            m_cmdOk = New Command(AddressOf OkCmd)
+         End If
+         Return m_cmdOk
+      End Get
+   End Property
+
+   Public Sub OkCmd(ByVal param As Object)
+      ' il numero di elementi indicato è corretto
+      ' deseleziono il pezzo corrente
+      DeselectPartInFaimily(m_sRefGuidOfPart)
+      Select Case m_nNbrOfParts
+         Case 0    ' Annulla
+            ' continuo senza eseguire niente
+         Case Else
+            ' seleziono il numero di pezzi indicati
+            SelectPartInFaimily(m_sRefGuidOfPart, m_nNbrOfParts)
+      End Select
+      ' chiudo la finestra
+      m_MultiSelectionV.Close()
+      EgtDraw()
+   End Sub
+
+   Public ReadOnly Property CancelCommand As ICommand
+      Get
+         If m_cmdCancel Is Nothing Then
+            m_cmdCancel = New Command(AddressOf CancelCmd)
+         End If
+         Return m_cmdCancel
+      End Get
+   End Property
+
+   Public Sub CancelCmd(ByVal param As Object)
+      ' chiudo la fiestra senza eseguire niente
+      m_MultiSelectionV.Close()
+      EgtDraw()
+   End Sub
+
+   Sub New(CurrNumberOfParts As Integer, sRefGuid As String)
+      m_nNbrOfParts = CurrNumberOfParts
+      m_sRefGuidOfPart = sRefGuid
+   End Sub
+End Class

OptionPanel/NestingTab/NestingTabVM.vb

@@ -115,8 +115,7 @@ Public Class NestingTabVM
       End Get
       Set(value As String)
          Dim dValue As Double
-         'StringToDouble(value, m_dRotationAngle)
-         If StringToLen(value, dValue) Then
+         If StringToDouble(value, dValue) Then
             If dValue < 0 Then
                dValue = 0
             ElseIf dValue > 180 Then
@@ -175,7 +174,7 @@ Public Class NestingTabVM
 
    Public ReadOnly Property DragRettangleMsg As String
       Get
-         Return "Drag Rettangle"
+         Return "Drag Rectangle"
       End Get
    End Property
 
@@ -414,8 +413,29 @@ Public Class NestingTabVM
                If Not EgtGetPartPartClusterCenterGlob(nId, ptCen) Then Return False
                ' Rotazione del pezzo attorno al suo centro
                EgtRotate(nId, ptCen, Vector3d.Z_AX(), dAngRotDeg, GDB_RT.GLOB)
-               ' Sistemazione nel parcheggio
-               PackPartInStore(nId)
+
+               '---------------------- COUNTER PART ----------------------
+               ' Aggiorno il Guid assegnando la nuova rotazione
+               Dim sRefGroup As String = String.Empty
+               If EgtGetInfo(nId, INFO_REFGROUP, sRefGroup) Then
+                  Dim sCurrRefGroup As String = sRefGroup
+                  If UppDateGuidCode(sRefGroup, CreatePreGuidCode(nId)) Then
+                     EgtSetInfo(nId, INFO_REFGROUP, sRefGroup)
+                  End If
+                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
+                  CountPartInFamily(sCurrRefGroup)
+               End If
+               ' se esiste almento un pezzo del gruppo in parcheggio esco
+               If Not ParkInGroupFamily(nId) Then
+                  PackPartInStore(nId)
+               End If
+               ' ricarico l'lelenco dei pezzi in parcheggio
+               GetFamilyGroupInPark()
+               '---------------------- COUNTER PART ----------------------
+
+
+               '' Sistemazione nel parcheggio
+               'PackPartInStore(nId)
             End If
             ' Passo al successivo selezionato
             nId = EgtGetNextSelectedObj()
@@ -759,25 +779,29 @@ Public Class NestingTabVM
          Dim ptCen As Point3d
          EgtCenterPoint(m_nIdSelectedTextRettangle, ptCen)
          EgtModifyText(m_nIdSelectedTextRettangle, m_sTextContent & LenToString(MaxLen + dProjection, 2) & " x " & LenToString(MinLen, 2))
-         EgtMove(m_nIdSelectedTextRettangle, vtMove * 0.5)
+         EgtMove(m_nIdSelectedTextRettangle, vtMove * 0.5, GDB_ID.ROOT)
          If m_nIdSelectedTextTopRettangle <> GDB_ID.NULL Then
-            EgtMove(m_nIdSelectedTextTopRettangle, vtMove * 0.5)
+            EgtMove(m_nIdSelectedTextTopRettangle, vtMove * 0.5, GDB_ID.ROOT)
          End If
       End If
 
+      ' verifico che il il lato  maggiore rimanga semore il lato maggiore
+      Dim bRettangleCorrect As Boolean = False
+      If (MaxLen + dProjection - MinLen) > EPS_SMALL Then bRettangleCorrect = True
+
       Dim nWarn As Integer = 0
       ResetAllMachinings(nWarn)
       EnableReferenceRegion(False)
       ' se la modifica genera un errore allora ripristino la figura prima della defomrazione
-      If Not EgtVerifyPart(EgtGetParent(m_nIdSelectedOutLoopRettangle), True) Then
+      If Not EgtVerifyPart(EgtGetParent(m_nIdSelectedOutLoopRettangle), True) Or Not bRettangleCorrect Then
          EgtScale(m_nIdSelectedOutLoopRettangle, frFixed, 1 / dScalefactor, 1, 1, GDB_ID.ROOT)
          EgtScale(m_nIdSelectedFlatSurfRettangle, frFixed, 1 / dScalefactor, 1, 1, GDB_ID.ROOT)
          Dim ptCen As Point3d
          EgtCenterPoint(m_nIdSelectedTextRettangle, ptCen)
          EgtModifyText(m_nIdSelectedTextRettangle, m_sTextContent & LenToString(MaxLen, 2) & " x " & LenToString(MinLen, 2))
-         EgtMove(m_nIdSelectedTextRettangle, -vtMove * 0.5)
+         EgtMove(m_nIdSelectedTextRettangle, -vtMove * 0.5, GDB_ID.ROOT)
          If m_nIdSelectedTextTopRettangle <> GDB_ID.NULL Then
-            EgtMove(m_nIdSelectedTextTopRettangle, -vtMove * 0.5)
+            EgtMove(m_nIdSelectedTextTopRettangle, -vtMove * 0.5, GDB_ID.ROOT)
          End If
       End If
 
@@ -1236,6 +1260,8 @@ Public Class NestingTabVM
    End Property
 
    Public Sub StorePart(ByVal param As Object)
+      ' creo la lista delle famiglie di pezzi presenti in parcheggio
+      GetFamilyGroupInPark()
       EgtSetCurrentContext(OmagOFFICEMap.refSceneHostVM.MainScene.GetCtx())
       ' Ciclo di parcheggio dei pezzi selezionati
       Dim nId As Integer = EgtGetFirstSelectedObj()
@@ -1308,13 +1334,20 @@ Public Class NestingTabVM
          If bEraseCsvParts OrElse Not EgtExistsInfo(nId, INFO_CSV_PATH) Then
             ' Se pezzo in parcheggio cancello direttamente
             If EgtIsPart(nId) Then
+               '---------------------- COUNTER PART ----------------------
+               Dim sRefGroup As String = String.Empty
+               ' recupero l'GUID del gruppo 
+               EgtGetInfo(nId, INFO_REFGROUP, sRefGroup)
+               '---------------------- COUNTER PART ----------------------
                ' Eventuale notifica al VeinMatching
                VeinMatching.OnRemovePart(nId, False)
                ' Rimuovo le lavorazioni
                EraseMachinings(nId)
                ' Cancello
                EgtErase(nId)
-            ' Altrimenti pezzo nel grezzo
+               ' aggiorno il layer che indica il numero di pezzi in parcheggio (se sRefGroup<>"")
+               CountPartInFamily(sRefGroup)
+               ' Altrimenti pezzo nel grezzo
             ElseIf EgtGetParent(nId) = EstCalc.GetRawId() Then
                If EgtRemovePartFromRawPart(nId) Then
                   ' Eventuale notifica al VeinMatching
@@ -1529,13 +1562,35 @@ Public Class NestingTabVM
          If EgtIsPart(nPartId) Or bPartInTable Then
             Dim nStat As Integer = GDB_ST.ON_
             EgtGetStatus(nPartId, nStat)
-            ' Se già selezionato
-            If nStat = GDB_ST.SEL Then
-               ' Memorizzo Id da deselezionare
-               m_nIdToDesel = nPartId
-            Else
-               ' Memorizzo Id da selezionare
-               m_nIdToSel = nPartId
+
+            ' verifico se l'lemento selezionato è il numero di pezzi
+            If EgtGetType(nId) = GDB_TY.EXT_TEXT Then
+               Dim NameLayer As String = String.Empty
+               EgtGetName(EgtGetParent(nId), NameLayer)
+               If NameLayer = INFO_COUNTERLY Then
+                  Dim sText As String = String.Empty
+                  If EgtTextGetContent(nId, sText) Then
+                     Dim sItems() As String = sText.Split("#")
+                     If sItems.Count > 1 Then
+                        m_nCurrNubrOfParts = 0
+                        If StringToInt(sItems(1), m_nCurrNubrOfParts) Then
+                           m_bIsCounterLy = True
+                           m_nIdToSel = nPartId
+                        End If
+                     End If
+                  End If
+               End If
+            End If
+
+            If Not m_bIsCounterLy Then
+               ' Se già selezionato o posizione oggetto incompatibile con flag posizione selezionati
+               If nStat = GDB_ST.SEL Then
+                  ' Memorizzo Id da deselezionare
+                  m_nIdToDesel = nPartId
+               Else
+                  ' Memorizzo Id da selezionare
+                  m_nIdToSel = nPartId
+               End If
             End If
             ' Drag possibile
             m_bDrag = True
@@ -1588,7 +1643,20 @@ Public Class NestingTabVM
          Dim b3Ins As new BBox3d
          EgtGetBBoxGlob( EgtGetFirstNameInGroup( nTestId, NAME_REGION), BBFLAG, b3Ins)
          Dim vtDiff As new Vector3d( b3Curr.Min().x - b3Ins.Min().x, b3Curr.Min().y - b3Ins.Min().y, 0)
-         EgtMove( nMoveId, vtDiff)
+         EgtMove(nMoveId, vtDiff)
+
+         '---------------------- COUNTER PART ----------------------
+         ' aggiorno contatore pezzi
+         Dim sRefGroup As String = String.Empty
+         If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
+            ' spengo il layer che contiene il contatore
+            Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
+            EgtSetStatus(nCounterLayer, GDB_ST.OFF)
+            ' aggiorno il layer che indica il numero di pezzi in parcheggio
+            CountPartInFamily(sRefGroup)
+         End If
+         '---------------------- COUNTER PART ----------------------
+
          ' Gestione VeinMatching
          VeinMatching.OnInsertPartInRaw( nMoveId)
          ' Imposto stato
@@ -1693,12 +1761,34 @@ Public Class NestingTabVM
                      VeinMatching.OnMovePartInRaw(nMoveId)
                   End If
                End If
+               '---------------------- COUNTER PART ----------------------
+               Dim sRefGroup As String = String.Empty
+               If EgtGetInfo(nMoveId, INFO_REFGROUP, sRefGroup) Then
+                  ' accendo il layer che contiene il contatore (spento in fase di Drag)
+                  Dim nCounterLayer As Integer = EgtGetFirstNameInGroup(nMoveId, INFO_COUNTERLY)
+                  EgtSetStatus(nCounterLayer, GDB_ST.ON_)
+                  ' aggiorno il layer che indica il numero di pezzi in parcheggio
+                  CountPartInFamily(sRefGroup)
+               End If
+               '---------------------- COUNTER PART ----------------------
             End If
             m_bFromParking = False
             ' altrimenti caso con verifica durante il movimento
          Else
             ' Basta reset alla fine
          End If
+
+         ' se è stato selezionato il layer del contatore mostro la finsetra
+      ElseIf m_bIsCounterLy Then
+         ' devo csotruire la finestra per la selezione del numero di pezzi da muovere
+         ' apro una finestra di dialogo per chiedere se inserire tutti i pezzi della famiglia
+         Dim sRefGroup As String = String.Empty
+         EgtGetInfo(m_nIdToSel, INFO_REFGROUP, sRefGroup)
+         Dim DataContextSlectWD As New MultiSelectionVM(m_nCurrNubrOfParts, sRefGroup)
+         Dim SelectWD As MultiSelectionV = New MultiSelectionV(Application.Current.MainWindow, DataContextSlectWD)
+         DataContextSlectWD.SetMultiSelectionV(SelectWD)
+         m_bIsCounterLy = False
+
          ' Se selezione da eseguire
       ElseIf m_nIdToSel <> GDB_ID.NULL Then
          ' Determino se pezzo in tavola o in parcheggio
@@ -1772,3 +1862,48 @@ Public Class NestingTabVM
 #End Region    ' EVENTS
 
 End Class
+
+Class FamilyPart
+
+   Private PtMinStoraged As Point3d
+   Private PtMaxStoraged As Point3d
+
+   Private m_nHText As Integer = 40
+   Public ReadOnly Property nHText As Double
+      Get
+         Return m_nHText
+      End Get
+   End Property
+
+   Private m_sRefGuid As String = String.Empty
+   Public ReadOnly Property sRefGuid As String
+      Get
+         Return m_sRefGuid
+      End Get
+   End Property
+
+   Private m_nIdPart As Integer = -1
+   Public ReadOnly Property nIdPart As Integer
+      Get
+         Return m_nIdPart
+      End Get
+   End Property
+
+   Private m_IdCounterText As Integer
+   Public ReadOnly Property IdCounterText As Integer
+      Get
+         Return m_IdCounterText
+      End Get
+   End Property
+
+   Public Function PtStorage() As Point3d
+      EgtGetBBoxGlob(m_nIdPart, GDB_BB.STANDARD, PtMinStoraged, PtMaxStoraged)
+      Return PtMinStoraged
+   End Function
+
+   Sub New(Guid As String, IdPart As Integer)
+      m_sRefGuid = Guid
+      m_nIdPart = IdPart
+   End Sub
+
+End Class

OptionPanel/RawPartTab/RawPartTabVM.vb

@@ -1678,8 +1678,11 @@ Public Class RawPartTabVM
    End Sub
 
    Private Sub AdjustRawPartOnExit()
-      ' Se non c'è il grezzo, esco
-      If EstCalc.GetRawId() = GDB_ID.NULL Then Return
+      ' Se non c'è il grezzo, esco dopo aver nascosto eventuale foto
+      If EstCalc.GetRawId() = GDB_ID.NULL Then
+         ShowPhoto(False)
+         Return
+      End If
       ' Disabilito impostazione modificato
       Dim bOldEnMod = EgtGetEnableModified()
       If bOldEnMod Then EgtDisableModified()