- aggiunta indicazione parametri beta

- aggiunto parametro SlicingHeight
- corretti alcuni testi parametri

Icarus/Constants/Const3dPrint.vb

@@ -108,6 +108,7 @@
    Public Const MAC_PREFLOWDELAY = "PreFlowDelay"
    Public Const MAC_POSTFLOWDELAY = "PostFlowDelay"
    Public Const MAC_SCREWBACK = "ScrewBack"
+   Public Const MAC_SLICINGHEIGHT = "SlicingHeight"
    Public Const MAC_RIBSTYPE = "RibsType"
    Public Const MAC_RIBSOVERLAP = "RibsOverlap"
    Public Const MAC_RIBSSTRANDCOUNT = "RibsStrandCount"
@@ -129,6 +130,8 @@
    Public Const MAC_SHELLNBRWIPEDIR = "ShellNbrWipeDir"
    Public Const MAC_AUXSOLIDSOVERLAP = "AuxSolidsOverlap"
    Public Const MAC_AUXSOLIDSINFILL = "AuxSolidsInfill"
+   Public Const MAC_AUXSOLIDSINFILLLINK = "AuxSolidsInfillLink"
+   Public Const MAC_AUXSOLIDSSTRANDCOUNT = "AuxSolidsStrandCount"
    Public Const MAC_AUXSOLIDSSTRANDORDER = "AuxSolidsStrandOrder"
    Public Const MAC_AUXSOLIDSLINKTYPE = "AuxSolidsLinkType"
    Public Const MAC_AUXSOLIDSLINKPARAM = "AuxSolidsLinkParam"
@@ -146,6 +149,7 @@
    Public Const MAC_CEILCOUNT = "CeilCount"
    Public Const MAC_CEILTYPE = "CeilType"
    Public Const MAC_INFILLTYPE = "InfillType"
+   Public Const MAC_INFILLLINK = "InfillLink"
    Public Const MAC_INFILLDENSITY = "InfillDensity"
    Public Const MAC_INFILLOVERLAP = "InfillOverlap"
    Public Const MAC_INFILLGRIDOVERLAP = "InfillGridOverlap"

Icarus/Constants/ConstMachIni.vb

@@ -10,6 +10,7 @@
    Public Const K_SLICINGTYPE As String = "SlicingType"
    Public Const K_SPEED_MIN As String = "SpeedMin"
    Public Const K_SPEED_MAX As String = "SpeedMax"
+   Public Const K_MAX_HEIGHT As String = "HMax"
 
    Public Const S_MINMAX As String = "MinMax"
 

Icarus/CurrMachiningPanel/CurrMachining.vb

@@ -220,7 +220,8 @@ Public Class CurrMachiningCathegory
                                                                 New CurrOrderedMachiningParam(MachiningParam.Params.PRINT_ORDER, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.PREFLOWDELAY, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.POSTFLOWDELAY, nPartId, nIndex, bForceFromDb, Me),
-                                                                New CurrNumericMachiningParam(MachiningParam.Params.SCREWBACK, nPartId, nIndex, bForceFromDb, Me)})
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.SCREWBACK, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.SLICINGHEIGHT, nPartId, nIndex, bForceFromDb, Me)})
          Case Cathegories.LINK
             m_sName = "Shell"
             m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.LINKTYPE, nPartId, nIndex, bForceFromDb, Me),
@@ -263,6 +264,8 @@ Public Class CurrMachiningCathegory
          Case Cathegories.AUX_SOLID
             m_sName = "Filled Solid"
             m_MachiningParamList = New List(Of MachiningParam)({New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.AUXSOLIDSINFILLLINK, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDCOUNT, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nPartId, nIndex, bForceFromDb, Me),
@@ -284,6 +287,7 @@ Public Class CurrMachiningCathegory
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.CEILCOUNT, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.CEILTYPE, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrComboMachiningParam(MachiningParam.Params.INFILLTYPE, nPartId, nIndex, bForceFromDb, Me),
+                                                                New CurrCheckMachiningParam(MachiningParam.Params.INFILLLINK, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.INFILLDENSITY, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.INFILLGRIDOVERLAP, nPartId, nIndex, bForceFromDb, Me),
                                                                 New CurrNumericMachiningParam(MachiningParam.Params.INFILLDIRECTION, nPartId, nIndex, bForceFromDb, Me),
@@ -311,6 +315,10 @@ Public Class CurrMachiningCathegory
                Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
                MachiningParam.ManageDependencyParam()
             Next
+            For Each Param In {MachiningParam.Params.AUXSOLIDSSTRANDCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
          Case Cathegories.INFILL
             For Each Param In {MachiningParam.Params.FLOORCOUNT, MachiningParam.Params.CEILCOUNT}
                Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
@@ -459,6 +467,9 @@ Public Class CurrNumericMachiningParam
          Case Params.SCREWBACK
             bReadFromPart = EgtGetInfo(nPartId, MAC_SCREWBACK, m_dValue)
             m_bIsLen = True
+         Case Params.SLICINGHEIGHT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_SLICINGHEIGHT, m_dValue)
+            m_bIsLen = True
          Case Params.RIBSOVERLAP
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSOVERLAP, m_dValue)
             m_bIsLen = False
@@ -498,6 +509,9 @@ Public Class CurrNumericMachiningParam
          Case Params.AUXSOLIDSLINKPARAM
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSLINKPARAM, m_dValue)
             m_bIsLen = True
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSSTRANDCOUNT, m_dValue)
+            m_bIsLen = False
          Case Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE
             bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSSTARTPOINTOFFSETONSLICE, m_dValue)
             m_bIsLen = True
@@ -567,7 +581,7 @@ Public Class CurrNumericMachiningParam
          Dim DbMachining As Machining = Map.refMachiningDbVM.MachiningList.FirstOrDefault(Function(x) x.nIndex = nIndex)
          Select Case Type
             Case Params.STRANDH, Params.STRANDW, Params.STRANDCOUNT, Params.OFFSET, Params.STRANDOVERLAP, Params.STARTPOINTOFFSETONSLICE,
-                 Params.G0FEED, Params.G0FEEDZ, Params.LINKZUP, Params.TOOLDIAM, Params.FLOWRATE_PC, Params.PREFLOWDELAY, Params.POSTFLOWDELAY, Params.SCREWBACK
+                 Params.G0FEED, Params.G0FEEDZ, Params.LINKZUP, Params.TOOLDIAM, Params.FLOWRATE_PC, Params.PREFLOWDELAY, Params.POSTFLOWDELAY, Params.SCREWBACK, Params.SLICINGHEIGHT
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.LINKPARAM, Params.OFFSETLEADPOINT, Params.LEADINTANGDIST, Params.LEADINORTHODIST,
                  Params.LEADOUTTANGDIST, Params.LEADOUTORTHODIST, Params.COASTINGLEN, Params.COASTINGFEED_PC,
@@ -582,7 +596,7 @@ Public Class CurrNumericMachiningParam
             Case Params.AUXSOLIDSOVERLAP, Params.AUXSOLIDSLINKPARAM, Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE,
                  Params.AUXSOLIDSOFFSETLEADPOINT, Params.AUXSOLIDSDENSITY, Params.AUXSOLIDSGRIDOVERLAP,
                  Params.AUXSOLIDSDIRECTION, Params.AUXSOLIDSOFFSETX, Params.AUXSOLIDSOFFSETY,
-                 Params.AUXSOLIDSCOASTINGLEN, Params.AUXSOLIDSWIPELEN, Params.AUXSOLIDSWIPEDIR
+                 Params.AUXSOLIDSCOASTINGLEN, Params.AUXSOLIDSWIPELEN, Params.AUXSOLIDSWIPEDIR, Params.AUXSOLIDSSTRANDCOUNT
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.FLOORCOUNT, Params.CEILCOUNT, Params.INFILLDENSITY, Params.INFILLOVERLAP,
                  Params.INFILLGRIDOVERLAP, Params.INFILLDIRECTION, Params.INFILLOFFSETX,
@@ -660,6 +674,8 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_POSTFLOWDELAY, sWriteValue)
          Case Params.SCREWBACK
             EgtSetInfo(nPartId, MAC_SCREWBACK, sWriteValue)
+         Case Params.SLICINGHEIGHT
+            EgtSetInfo(nPartId, MAC_SLICINGHEIGHT, sWriteValue)
          Case Params.RIBSOVERLAP
             EgtSetInfo(nPartId, MAC_RIBSOVERLAP, sWriteValue)
          Case Params.RIBSSTRANDCOUNT
@@ -682,6 +698,8 @@ Public Class CurrNumericMachiningParam
             EgtSetInfo(nPartId, MAC_SHELLNBRWIPE, sWriteValue)
          Case Params.SHELLNBRWIPEDIR
             EgtSetInfo(nPartId, MAC_SHELLNBRWIPEDIR, sWriteValue)
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSSTRANDCOUNT, sWriteValue)
          Case Params.AUXSOLIDSOVERLAP
             EgtSetInfo(nPartId, MAC_AUXSOLIDSOVERLAP, sWriteValue)
          Case Params.AUXSOLIDSLINKPARAM
@@ -1130,6 +1148,10 @@ Public Class CurrCheckMachiningParam
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLEADOUTINVERT, m_bValue)
          Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
             bReadFromPart = EgtGetInfo(nPartId, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, m_bValue)
+         Case Params.AUXSOLIDSINFILLLINK
+            bReadFromPart = EgtGetInfo(nPartId, MAC_AUXSOLIDSINFILLLINK, m_bValue)
+         Case Params.INFILLLINK
+            bReadFromPart = EgtGetInfo(nPartId, MAC_INFILLLINK, m_bValue)
       End Select
       m_bOrigValue = m_bValue
       If nIndex > 0 Then
@@ -1139,6 +1161,10 @@ Public Class CurrCheckMachiningParam
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.GENERAL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
             Case Params.RIBSLINK, Params.RIBSINVERTORDER, Params.RIBSINVERTDIRECTION, Params.RIBSINVERTSTRANDORDER, Params.RIBSLEADININVERT, Params.RIBSLEADOUTINVERT, Params.RIBSLIMITUNBOUNDEDWITHSOLID
                m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.RIBS).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.AUXSOLIDSINFILLLINK
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.AUX_SOLID).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
+            Case Params.INFILLLINK
+               m_DbParam = DbMachining.CathegoryList.FirstOrDefault(Function(y) y.Type = MachiningCathegory.Cathegories.INFILL).MachiningParamList.FirstOrDefault(Function(z) z.Type = m_Type)
          End Select
          If bForceFromDb OrElse Not bReadFromPart Then
             m_bValue = m_DbParam.bOrigValue
@@ -1165,6 +1191,10 @@ Public Class CurrCheckMachiningParam
             EgtSetInfo(nPartId, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0))
          Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
             EgtSetInfo(nPartId, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, If(m_bValue, 1, 0))
+         Case Params.AUXSOLIDSINFILLLINK
+            EgtSetInfo(nPartId, MAC_AUXSOLIDSINFILLLINK, If(m_bValue, 1, 0))
+         Case Params.INFILLLINK
+            EgtSetInfo(nPartId, MAC_INFILLLINK, If(m_bValue, 1, 0))
       End Select
    End Sub
 

Icarus/CurrMachiningPanel/CurrMachiningPanelV.xaml

@@ -54,9 +54,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="Auto"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <EgtWPFLib5:EgtTextBox2 Grid.Column="1"
                                                             Text="{Binding sValue, UpdateSourceTrigger=Explicit}"
                                                             Margin="2.5,0,2.5,0"
@@ -79,9 +86,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="Auto"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <ComboBox Grid.Column="1"
                                               ItemsSource="{Binding ValueList}"
                                               SelectedItem="{Binding SelValue}"
@@ -107,9 +121,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="Auto"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <CheckBox Grid.Column="1"
                                               IsChecked="{Binding bValue}"
                                               HorizontalAlignment="Center"

Icarus/FilledSolidParamPanel/FilledSolidParamPanelV.xaml

@@ -84,6 +84,32 @@
                                 Style="{StaticResource ToolBar_SmallButton}"/>
                      </Grid>
                   </DataTemplate>
+                  <DataTemplate DataType="{x:Type PrintApp:CheckMachiningParam}">
+                     <Grid Margin="0,1,2.5,1"
+                           IsEnabled="{Binding bIsActive}">
+                        <Grid.ColumnDefinitions>
+                           <ColumnDefinition Width="2*"/>
+                           <ColumnDefinition Width="1*"/>
+                           <ColumnDefinition Width="Auto"/>
+                        </Grid.ColumnDefinitions>
+                        <TextBlock Text="{Binding sName}"
+                                   Margin="0,0,2.5,0"
+                                   Style="{StaticResource ParameterList_TextBlock}"/>
+                        <CheckBox Grid.Column="1"
+                                  IsChecked="{Binding bValue}"
+                                  HorizontalAlignment="Center"
+                                  VerticalAlignment="Center"
+                                  Margin="2.5,0,0,0"/>
+                        <Button Grid.Column="2"
+                                Content="R"
+                                Command="{Binding ResetParam_Command}"
+                                IsEnabled="{Binding bIsModifiedFromPart}"
+                                VerticalContentAlignment="Center"
+                                HorizontalContentAlignment="Center"
+                                Margin="2.5,0,0,0"
+                                Style="{StaticResource ToolBar_SmallButton}"/>
+                     </Grid>
+                  </DataTemplate>
                </ItemsControl.Resources>
             </ItemsControl>
          </ScrollViewer>

Icarus/FilledSolidParamPanel/FilledSolidParamPanelVM.vb

@@ -43,6 +43,8 @@ Public Class FilledSolidParamPanelVM
       m_Type = Cathegories.AUX_SOLID
       m_sName = "Filled Solid"
       m_MachiningParamList = New List(Of MachiningParam)({New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidcheckMachiningParam(MachiningParam.Params.AUXSOLIDSINFILLLINK, nFilledSolidId, nPartId, Me),
+                                                          New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDCOUNT, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nFilledSolidId, nPartId, Me),
                                                           New FilledSolidNumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nFilledSolidId, nPartId, Me),
@@ -196,6 +198,10 @@ Public Class FilledSolidNumericMachiningParam
       MyBase.New(Type, Cathegory)
       Dim bReadFromPart As Boolean = False
       Select Case Type
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDCOUNT, m_dValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSSTRANDCOUNT, m_dPartValue)
+            m_bIsLen = True
          Case Params.AUXSOLIDSOVERLAP
             bReadFromPart = EgtGetInfo(nFilledSolidId, MAC_AUXSOLIDSOVERLAP, m_dValue)
             EgtGetInfo(nPartId, MAC_AUXSOLIDSOVERLAP, m_dPartValue)
@@ -260,6 +266,12 @@ Public Class FilledSolidNumericMachiningParam
          sWriteValue = DoubleToString(m_dValue, 2)
       End If
       Select Case Type
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDCOUNT, sWriteValue)
+            Else
+               EgtRemoveInfo(nFilledSolidId, MAC_AUXSOLIDSSTRANDCOUNT)
+            End If
          Case Params.AUXSOLIDSOVERLAP
             If bIsModifiedFromPart Then
                EgtSetInfo(nFilledSolidId, MAC_AUXSOLIDSOVERLAP, sWriteValue)
@@ -518,4 +530,95 @@ Public Class FilledSolidComboMachiningParam
 #End Region    ' COMMANDS
 
 
+End Class
+
+Public Class FilledSolidCheckMachiningParam
+   Inherits CheckMachiningParam
+
+   Public Overrides Property bValue As Boolean
+      Get
+         Return m_bValue
+      End Get
+      Set(value As Boolean)
+         m_bValue = value
+         NotifyPropertyChanged(NameOf(bValue))
+         NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+      End Set
+   End Property
+
+   Protected m_bPartValue As Boolean
+   Public ReadOnly Property bPartValue As Boolean
+      Get
+         Return m_bPartValue
+      End Get
+   End Property
+
+   Public ReadOnly Property bIsModifiedFromPart As Boolean
+      Get
+         Return m_bValue <> m_bPartValue
+      End Get
+   End Property
+
+   ' Definizione comandi
+   Private m_cmdResetParam As ICommand
+
+   Sub New(Type As Params, nAuxSolidId As Integer, nPartId As Integer, Cathegory As MachiningCathegory)
+      MyBase.New(Type, Cathegory)
+      Dim bReadFromPart As Boolean = False
+      Select Case Type
+         Case Params.AUXSOLIDSINFILLLINK
+            bReadFromPart = EgtGetInfo(nAuxSolidId, MAC_AUXSOLIDSINFILLLINK, m_bValue)
+            EgtGetInfo(nPartId, MAC_AUXSOLIDSINFILLLINK, m_bPartValue)
+      End Select
+      m_bOrigValue = m_bValue
+      If Not bReadFromPart Then
+         m_bValue = m_bPartValue
+         m_bOrigValue = m_bPartValue
+      End If
+   End Sub
+
+   Friend Sub WriteParamInRib(nAuxSolidId As Integer)
+      Select Case Type
+         Case Params.AUXSOLIDSINFILLLINK
+            If bIsModifiedFromPart Then
+               EgtSetInfo(nAuxSolidId, MAC_AUXSOLIDSINFILLLINK, If(m_bValue, 1, 0))
+            Else
+               EgtRemoveInfo(nAuxSolidId, MAC_AUXSOLIDSINFILLLINK)
+            End If
+      End Select
+   End Sub
+
+   Friend Overrides Sub SaveParam()
+      m_bOrigValue = m_bValue
+   End Sub
+
+   Friend Overrides Sub ResetParam()
+      m_bValue = m_bOrigValue
+      NotifyPropertyChanged(NameOf(bValue))
+   End Sub
+
+#Region "COMMANDS"
+
+#Region "ResetParam"
+
+   Public ReadOnly Property ResetParam_Command As ICommand
+      Get
+         If m_cmdResetParam Is Nothing Then
+            m_cmdResetParam = New Command(AddressOf ResetParamCmd)
+         End If
+         Return m_cmdResetParam
+      End Get
+   End Property
+
+   Public Sub ResetParamCmd()
+      m_bValue = m_bPartValue
+      NotifyPropertyChanged(NameOf(bValue))
+      NotifyPropertyChanged(NameOf(bIsModifiedFromPart))
+   End Sub
+
+#End Region    ' ResetParam
+
+#End Region    ' COMMANDS
+
+
 End Class

Icarus/MachiningDb/Machining.vb

@@ -342,7 +342,8 @@ Public Class MachiningCathegory
                                                                 New OrderedMachiningParam(MachiningParam.Params.PRINT_ORDER, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.PREFLOWDELAY, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.POSTFLOWDELAY, nIndex, Me),
-                                                                New NumericMachiningParam(MachiningParam.Params.SCREWBACK, nIndex, Me)})
+                                                                New NumericMachiningParam(MachiningParam.Params.SCREWBACK, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.SLICINGHEIGHT, nIndex, Me)})
          Case Cathegories.LINK
             m_sName = "Shell"
             m_MachiningParamList = New List(Of MachiningParam)({New NumericMachiningParam(MachiningParam.Params.OFFSETLEADPOINT, nIndex, Me),
@@ -385,6 +386,8 @@ Public Class MachiningCathegory
          Case Cathegories.AUX_SOLID
             m_sName = "Filled Solid"
             m_MachiningParamList = New List(Of MachiningParam)({New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSINFILL, nIndex, Me),
+                                                                New CheckMachiningParam(MachiningParam.Params.AUXSOLIDSINFILLLINK, nIndex, Me),
+                                                                New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDCOUNT, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSSTRANDORDER, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.AUXSOLIDSLINKTYPE, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.AUXSOLIDSLINKPARAM, nIndex, Me),
@@ -406,6 +409,7 @@ Public Class MachiningCathegory
                                                                 New NumericMachiningParam(MachiningParam.Params.CEILCOUNT, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.CEILTYPE, nIndex, Me),
                                                                 New ComboMachiningParam(MachiningParam.Params.INFILLTYPE, nIndex, Me),
+                                                                New CheckMachiningParam(MachiningParam.Params.INFILLLINK, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.INFILLDENSITY, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.INFILLGRIDOVERLAP, nIndex, Me),
                                                                 New NumericMachiningParam(MachiningParam.Params.INFILLDIRECTION, nIndex, Me),
@@ -442,6 +446,10 @@ Public Class MachiningCathegory
                Dim MachiningParam As ComboMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
                MachiningParam.ManageDependencyParam()
             Next
+            For Each Param In {MachiningParam.Params.AUXSOLIDSSTRANDCOUNT}
+               Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
+               MachiningParam.ManageDependencyParam()
+            Next
          Case Cathegories.INFILL
             For Each Param In {MachiningParam.Params.FLOORCOUNT, MachiningParam.Params.CEILCOUNT}
                Dim MachiningParam As NumericMachiningParam = MachiningParamList.FirstOrDefault(Function(z) z.Type = Param)
@@ -501,6 +509,7 @@ Public MustInherit Class MachiningParam
       PREFLOWDELAY = 19
       POSTFLOWDELAY = 20
       SCREWBACK = 21
+      SLICINGHEIGHT = 22
       LINKTYPE = 51
       LINKPARAM = 52
       LEADIN = 53
@@ -549,20 +558,23 @@ Public MustInherit Class MachiningParam
       AUXSOLIDSCOASTINGLEN = 213
       AUXSOLIDSWIPELEN = 214
       AUXSOLIDSWIPEDIR = 215
+      AUXSOLIDSSTRANDCOUNT = 216
+      AUXSOLIDSINFILLLINK = 217
       FLOORCOUNT = 250
       FLOORTYPE = 251
       CEILCOUNT = 252
       CEILTYPE = 253
       INFILLTYPE = 254
-      INFILLDENSITY = 255
-      INFILLOVERLAP = 256
-      INFILLGRIDOVERLAP = 257
-      INFILLDIRECTION = 258
-      INFILLOFFSETX = 259
-      INFILLOFFSETY = 260
-      INFILLCOASTING = 261
-      INFILLWIPE = 262
-      INFILLWIPEDIR = 263
+      INFILLLINK = 255
+      INFILLDENSITY = 256
+      INFILLOVERLAP = 257
+      INFILLGRIDOVERLAP = 258
+      INFILLDIRECTION = 259
+      INFILLOFFSETX = 260
+      INFILLOFFSETY = 261
+      INFILLCOASTING = 262
+      INFILLWIPE = 263
+      INFILLWIPEDIR = 264
       MATERIALS = 500
    End Enum
 
@@ -589,12 +601,29 @@ Public MustInherit Class MachiningParam
       End Get
    End Property
 
+   Public ReadOnly Property bIsBeta As Boolean
+      Get
+         Select Case m_Type
+            Case Params.FLOORCOUNT, Params.FLOORTYPE, Params.CEILCOUNT, Params.CEILTYPE, Params.INFILLTYPE
+               Return True
+            Case Else
+               Return False
+         End Select
+      End Get
+   End Property
+
+   Public ReadOnly Property IsBeta_Visibility As Visibility
+      Get
+         Return If(bIsBeta, Visibility.Visible, Visibility.Collapsed)
+      End Get
+   End Property
+
    Sub New(Type As Params, Cathegory As MachiningCathegory)
       m_Type = Type
       m_Cathegory = Cathegory
       Select Case m_Type
          Case Params.SLICINGTYPE
-            m_sName = "Slicing direction"
+            m_sName = "Slicing Direction"
          Case Params.STRANDH
             m_sName = "Strand Height"
          Case Params.STRANDW
@@ -651,6 +680,8 @@ Public MustInherit Class MachiningParam
             m_sName = "Post Flow Delay"
          Case Params.SCREWBACK
             m_sName = "Screw Back"
+         Case Params.SLICINGHEIGHT
+            m_sName = "Slicing Height"
          Case Params.RIBSTYPE
             m_sName = "Type"
          Case Params.RIBSOVERLAP
@@ -693,6 +724,10 @@ Public MustInherit Class MachiningParam
             m_sName = "Overlap [%]"
          Case Params.AUXSOLIDSINFILL
             m_sName = "Infill"
+         Case Params.AUXSOLIDSINFILLLINK
+            m_sName = "Infill Link"
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            m_sName = "Strand Count"
          Case Params.AUXSOLIDSSTRANDORDER
             m_sName = "Strand Order"
          Case Params.AUXSOLIDSLINKTYPE
@@ -726,7 +761,7 @@ Public MustInherit Class MachiningParam
          Case Params.STRANDOVERLAP
             m_sName = "Strand Overlap [%]"
          Case Params.FLOWRATE_PC
-            m_sName = "Flow rate [%]"
+            m_sName = "Flow Rate [%]"
          Case Params.DYNAMIC_MODE
             m_sName = "Dynamic Mode"
          Case Params.PRINT_ORDER
@@ -739,6 +774,8 @@ Public MustInherit Class MachiningParam
             m_sName = "Ceil Type"
          Case Params.INFILLTYPE
             m_sName = "Infill Type"
+         Case Params.INFILLLINK
+            m_sName = "Link"
          Case Params.INFILLDENSITY
             m_sName = "Density [%]"
          Case Params.INFILLOVERLAP
@@ -854,6 +891,11 @@ Public Class NumericMachiningParam
             m_bIsActiveMinMax = True
          End If
       End If
+      If Type = Params.SLICINGHEIGHT Then
+         m_dMinValue = 0
+         m_dMaxValue = CurrentMachine.dSlicingMaxHeight
+         m_bIsActiveMinMax = True
+      End If
       ' leggo parametri da Db
       If nIndex = 0 Then
          m_dValue = 0
@@ -935,6 +977,9 @@ Public Class NumericMachiningParam
             Case Params.SCREWBACK
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_SCREWBACK, 45)
                m_bIsLen = False
+            Case Params.SLICINGHEIGHT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_SLICINGHEIGHT, CurrentMachine.dSlicingMaxHeight)
+               m_bIsLen = False
             Case Params.RIBSOVERLAP
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_RIBSOVERLAP, 0)
                m_bIsLen = False
@@ -968,6 +1013,9 @@ Public Class NumericMachiningParam
             Case Params.SHELLNBRWIPEDIR
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_SHELLNBRWIPEDIR, 0)
                m_bIsLen = False
+            Case Params.AUXSOLIDSSTRANDCOUNT
+               m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSSTRANDCOUNT, 0)
+               m_bIsLen = False
             Case Params.AUXSOLIDSOVERLAP
                m_dValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSOVERLAP, 0)
                m_bIsLen = False
@@ -1051,6 +1099,18 @@ Public Class NumericMachiningParam
          Case Params.CEILCOUNT
             Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.CEILTYPE)
             ComboMachiningParam.SetIsActive(m_dValue <> 0)
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            Dim AuxSolidsInfillParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSINFILL)
+            Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTRANDORDER)
+            ComboMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKTYPE)
+            ComboMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            Dim NumericMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKPARAM)
+            NumericMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE)
+            NumericMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
+            NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETLEADPOINT)
+            NumericMachiningParam.SetIsActive(m_dValue > 0 OrElse AuxSolidsInfillParam.SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET)
       End Select
    End Sub
 
@@ -1112,6 +1172,8 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_POSTFLOWDELAY, sWriteValue, sFilePath)
          Case Params.SCREWBACK
             WriteMachiningParam(nIndex, MAC_SCREWBACK, sWriteValue, sFilePath)
+         Case Params.SLICINGHEIGHT
+            WriteMachiningParam(nIndex, MAC_SLICINGHEIGHT, sWriteValue, sFilePath)
          Case Params.RIBSOVERLAP
             WriteMachiningParam(nIndex, MAC_RIBSOVERLAP, sWriteValue, sFilePath)
          Case Params.RIBSSTRANDCOUNT
@@ -1134,6 +1196,8 @@ Public Class NumericMachiningParam
             WriteMachiningParam(nIndex, MAC_SHELLNBRWIPE, sWriteValue, sFilePath)
          Case Params.SHELLNBRWIPEDIR
             WriteMachiningParam(nIndex, MAC_SHELLNBRWIPEDIR, sWriteValue, sFilePath)
+         Case Params.AUXSOLIDSSTRANDCOUNT
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSSTRANDCOUNT, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSOVERLAP
             WriteMachiningParam(nIndex, MAC_AUXSOLIDSOVERLAP, sWriteValue, sFilePath)
          Case Params.AUXSOLIDSLINKPARAM
@@ -1414,21 +1478,17 @@ Public Class ComboMachiningParam
             Dim CheckMachiningParam As CheckMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.RIBSLIMITUNBOUNDEDWITHSOLID)
             CheckMachiningParam.SetIsActive(m_SelValue.Id = MPAR_RIBSTYPE.UNBOUNDED)
          Case Params.AUXSOLIDSINFILL
+            Dim AuxSolidsStrandCountParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTRANDCOUNT)
             Dim ComboMachiningParam As ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTRANDORDER)
-            ComboMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
-                                            m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
+            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
             ComboMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKTYPE)
-            ComboMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
-                                            m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
+            ComboMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
             Dim NumMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSLINKPARAM)
-            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
-                                          m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
+            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
             NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSSTARTPOINTOFFSETONSLICE)
-            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
-                                          m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
+            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
             NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETLEADPOINT)
-            NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.LINES AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.GRID AndAlso
-                                          m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG_GRID AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.HONEYCOMB_GRID)
+            NumMachiningParam.SetIsActive(m_SelValue.Id = Machining.MPAR_INFILL_TYPE.OFFSET OrElse AuxSolidsStrandCountParam.dValue > 0)
             NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSDENSITY)
             NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
             NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSGRIDOVERLAP)
@@ -1440,6 +1500,8 @@ Public Class ComboMachiningParam
             NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
             NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSOFFSETY)
             NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
+            Dim CheckMachiningParam As CheckMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.AUXSOLIDSINFILLLINK)
+            CheckMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.ZIGZAG AndAlso m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.OFFSET)
          Case Params.INFILLTYPE
             Dim NumMachiningParam As NumericMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLDENSITY)
             NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
@@ -1451,6 +1513,8 @@ Public Class ComboMachiningParam
             NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
             NumMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLOFFSETY)
             NumMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
+            Dim CheckMachiningParam As CheckMachiningParam = m_Cathegory.MachiningParamList.FirstOrDefault(Function(z) z.Type = Params.INFILLLINK)
+            CheckMachiningParam.SetIsActive(m_SelValue.Id <> Machining.MPAR_INFILL_TYPE.NONE)
       End Select
    End Sub
 
@@ -1562,6 +1626,10 @@ Public Class CheckMachiningParam
                m_bValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLEADOUTINVERT, 0)
             Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
                m_bValue = ReadMachiningParamDouble(nIndex, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, 0)
+            Case Params.AUXSOLIDSINFILLLINK
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_AUXSOLIDSINFILLLINK, 0)
+            Case Params.INFILLLINK
+               m_bValue = ReadMachiningParamDouble(nIndex, MAC_INFILLLINK, 0)
          End Select
       End If
       m_bOrigValue = m_bValue
@@ -1585,6 +1653,10 @@ Public Class CheckMachiningParam
             WriteMachiningParam(nIndex, MAC_RIBSLEADOUTINVERT, If(m_bValue, 1, 0), sFilePath)
          Case Params.RIBSLIMITUNBOUNDEDWITHSOLID
             WriteMachiningParam(nIndex, MAC_RIBSLIMITUNBOUNDEDWITHSOLID, If(m_bValue, 1, 0), sFilePath)
+         Case Params.AUXSOLIDSINFILLLINK
+            WriteMachiningParam(nIndex, MAC_AUXSOLIDSINFILLLINK, If(m_bValue, 1, 0), sFilePath)
+         Case Params.INFILLLINK
+            WriteMachiningParam(nIndex, MAC_INFILLLINK, If(m_bValue, 1, 0), sFilePath)
       End Select
    End Sub
 

Icarus/MachiningDb/MachiningDbV.xaml

@@ -140,9 +140,16 @@
                                        <ColumnDefinition Width="2*"/>
                                        <ColumnDefinition Width="1*"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <EgtWPFLib5:EgtTextBox2 Grid.Column="1"
                                                             Text="{Binding sValue, UpdateSourceTrigger=Explicit}"
                                                             Margin="2.5,0,0,0"
@@ -156,9 +163,16 @@
                                        <ColumnDefinition Width="1*"/>
                                        <ColumnDefinition Width="1*"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <ComboBox Grid.Column="1"
                                               ItemsSource="{Binding ValueList}"
                                               SelectedItem="{Binding SelValue}"
@@ -175,9 +189,16 @@
                                        <ColumnDefinition Width="2*"/>
                                        <ColumnDefinition Width="1*"/>
                                     </Grid.ColumnDefinitions>
-                                    <TextBlock Text="{Binding sName}"
-                                               Margin="0,0,2.5,0"
-                                               Style="{StaticResource ParameterList_TextBlock}"/>
+                                    <StackPanel Orientation="Horizontal">
+                                       <TextBlock Text="{Binding sName, Mode=OneWay}"
+                                                  Margin="0,0,2.5,0"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                       <TextBlock Text=" (BETA)"
+                                                  Margin="0,0,2.5,0"
+                                                  Foreground="Red"
+                                                  Visibility="{Binding IsBeta_Visibility}"
+                                                  Style="{StaticResource ParameterList_TextBlock}"/>
+                                    </StackPanel>
                                     <CheckBox Grid.Column="1"
                                               IsChecked="{Binding bValue}"
                                               HorizontalAlignment="Center"

Icarus/MainWindow/MainWindowM.vb

@@ -191,8 +191,8 @@ Public Class MainWindowM
          EgtSetLockId( sLockId)
       End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5583, 2506, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5583, 2506, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(5583, 2507, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(5583, 2507, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & GENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

Icarus/My Project/AssemblyInfo.vb

@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.6.1")>
-<Assembly: AssemblyFileVersion("2.5.6.1")>
+<Assembly: AssemblyVersion("2.5.7.1")>
+<Assembly: AssemblyFileVersion("2.5.7.1")>

Icarus/TopPanel/TopPanelVM.vb

@@ -274,7 +274,27 @@ Public Class TopPanelVM
             WriteMainPrivateProfileString(S_PRINTING3D, K_CURRMACHINING, value.sGUID.ToString())
             ' imposto selezionata come corrente
             If Not IsNothing(m_SelPart) AndAlso (IsNothing(m_SelMachining) OrElse value.sGUID <> m_SelMachining.sGUID) Then
+               Dim GeneralCathegory As MachiningCathegory = Map.refTopPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL)
+               Dim OldSlicingTypeValue As Machining.MPAR_SLICINGTYPE = Nothing
+               Dim NewSlicingTypeValue As Machining.MPAR_SLICINGTYPE = Nothing
+               If Not IsNothing(GeneralCathegory) Then
+                  Dim SlicingTypeParam As ComboMachiningParam = GeneralCathegory.MachiningParamList.FirstOrDefault(Function(x) x.Type = MachiningParam.Params.SLICINGTYPE)
+                  If Not IsNothing(SlicingTypeParam) Then
+                     OldSlicingTypeValue = SlicingTypeParam.SelValue.Id
+                  End If
+               End If
                Map.refCurrMachiningPanelVM.SetCurrMachining(New CurrMachining(m_SelPart.nPartId, value.nIndex))
+               GeneralCathegory = Map.refTopPanelVM.CurrMachining.CathegoryList.FirstOrDefault(Function(x) x.Type = MachiningCathegory.Cathegories.GENERAL)
+               If Not IsNothing(GeneralCathegory) Then
+                  Dim SlicingTypeParam As ComboMachiningParam = GeneralCathegory.MachiningParamList.FirstOrDefault(Function(x) x.Type = MachiningParam.Params.SLICINGTYPE)
+                  If Not IsNothing(SlicingTypeParam) Then
+                     NewSlicingTypeValue = SlicingTypeParam.SelValue.Id
+                  End If
+               End If
+               If IsNothing(OldSlicingTypeValue) OrElse IsNothing(NewSlicingTypeValue) OrElse OldSlicingTypeValue <> NewSlicingTypeValue Then
+                  ' aggiorno area di estrusione
+                  CurrentMachine.UpdateExtrusionArea()
+               End If
             End If
          End If
          m_SelMachining = value

Icarus/Utility/CurrentMachine.vb

@@ -79,6 +79,14 @@ Public Module CurrentMachine
       End Get
    End Property
 
+   ' altezza massima di estrusione impostata in file ini macchina
+   Private m_dSlicingMaxHeight As Double
+   Public ReadOnly Property dSlicingMaxHeight As Double
+      Get
+         Return m_dSlicingMaxHeight
+      End Get
+   End Property
+
 #Region "Init"
 
    Sub InitCurrentMachine(sMachinesRootDir As String, sMachineName As String)
@@ -97,6 +105,8 @@ Public Module CurrentMachine
       m_sMachiningFilePath = sMachinesRootDir & "\" & sMachineName & "\Machinings\Machinings.ini"
       ' impostazione cartella materiali
       m_sMaterialFilePath = sMachinesRootDir & "\" & sMachineName & "\Materials\Materials.ini"
+      ' leggo altezza massima estrusione impostata su macchina
+      m_dSlicingMaxHeight = GetPrivateProfileDouble(S_MACH_PRINTING3D, K_MAX_HEIGHT, 900, m_sMachIniFile)
       ' Disabilito segnalazione modificato
       Dim DisableMgr As New DisableModifiedMgr
       ' recupero box macchina