Se motosega allineata ad asse B per tagli di fianco, corretto movimento che manda testa a parcheggio. Pezzi più alti di 650 va solo in Zmax

Common_ONE-PF.NUM.mlpe

@@ -2583,7 +2583,7 @@ function EmitZmax( bReset, bEnd, bXhome, PrevR1, PrevR2, bSplitCut, bUsePrevDelt
             EmitMoveDataHead( 1, MovH)
             EmitMoveDataHead( 1, { Z=dSafeZ1, B=dSafeB1})
             if EMT.SB > 650 and abs( EMT.R3) < 0.1 then
-               EmitMoveDataHead( 1, { Z=ParkCSawZ1, B=ParkB1})
+               EmitMoveDataHead( 1, { Z=ParkCSawZ1})
             end
             EmitMoveDataHead( 1, { X=-dSafeX1, C=dSafeC1})
             if bXhome then
@@ -2624,7 +2624,7 @@ function EmitZmax( bReset, bEnd, bXhome, PrevR1, PrevR2, bSplitCut, bUsePrevDelt
             EmitMoveDataHead( 1, MovH)
             EmitMoveDataHead( 1, { Z=dSafeZ1, B=dSafeB1})
             if EMT.SB > 650 and abs( EMT.R3) < 0.1 then
-               EmitMoveDataHead( 1, { Z=ParkCSawZ1, B=ParkB1})
+               EmitMoveDataHead( 1, { Z=ParkCSawZ1})
             end
             EmitMoveDataHead( 1, { X=-dSafeX1, C=dSafeC1})
             if bXhome then
@@ -2677,7 +2677,7 @@ function EmitZmax( bReset, bEnd, bXhome, PrevR1, PrevR2, bSplitCut, bUsePrevDelt
          EmitMoveDataHead( 2, MovH)
          EmitMoveDataHead( 2, { Z=dSafeZ2, B=dSafeB2})
          if EMT.SB > 650 and abs( EMT.R3) < 0.1 then
-            EmitMoveDataHead( 2, { Z=ParkCSawZ2, B=ParkB2})
+            EmitMoveDataHead( 2, { Z=ParkCSawZ2})
          end
          EmitMoveDataHead( 2, { X=-dSafeX2, C=dSafeC2})
          if bXhome then

Common_ONE-PF.mlpe

@@ -1574,7 +1574,7 @@ function ExecMoveZmax( bMchSplit, btoXHome)
          else
             SimulMoveAxes( 'Z1', HomeZ, MCH_SIM_STEP.RAPID, 'B1', HomeB, MCH_SIM_STEP.COLLROT)
             if EMT.SB > 650 and abs( EMT.R3) < 0.1 then
-               SimulMoveAxes( 'Z1', ParkCSawZ1, MCH_SIM_STEP.RAPID, 'B1', ParkB1, MCH_SIM_STEP.COLLROT)
+               SimulMoveAxis( 'Z1', ParkCSawZ1, MCH_SIM_STEP.RAPID)
             end
             SimulMoveAxes( 'X1', HomeX, MCH_SIM_STEP.RAPID, 'C1', HomeC, MCH_SIM_STEP.COLLROT)
          end
@@ -1598,7 +1598,7 @@ function ExecMoveZmax( bMchSplit, btoXHome)
          else
             SimulMoveAxes( 'Z1', HomeZ, MCH_SIM_STEP.RAPID, 'B1', HomeB, MCH_SIM_STEP.COLLROT)
             if EMT.SB > 650 and abs( EMT.R3) < 0.1 then
-               SimulMoveAxes( 'Z1', ParkCSawZ1, MCH_SIM_STEP.RAPID, 'B1', ParkB1, MCH_SIM_STEP.COLLROT)
+               SimulMoveAxis( 'Z1', ParkCSawZ1, MCH_SIM_STEP.RAPID)
             end
             if btoXHome then
                EgtUnloadTool( EMT.HEAD, 1)
@@ -1633,7 +1633,7 @@ function ExecMoveZmax( bMchSplit, btoXHome)
       else
          SimulMoveAxes( 'Z2', HomeZ, MCH_SIM_STEP.RAPID, 'B2', HomeB, MCH_SIM_STEP.COLLROT)
          if EMT.SB > 650 and abs( EMT.R3) < 0.1 then
-            SimulMoveAxes( 'Z2', ParkCSawZ2, MCH_SIM_STEP.RAPID, 'B2', ParkB2, MCH_SIM_STEP.COLLROT)
+            SimulMoveAxis( 'Z2', ParkCSawZ2, MCH_SIM_STEP.RAPID)
          end
          SimulMoveAxes( 'X2', HomeX, MCH_SIM_STEP.RAPID, 'C2', HomeC, MCH_SIM_STEP.COLLROT)
       end

Essetre-PFMAXrl.mlde

@@ -28,7 +28,7 @@
 require( 'EmtGenerator')
 EgtEnableDebug( false)
 
-PP_VER = '2.6g4'
+PP_VER = '2.6g4_DEV'
 MIN_MACH_VER = '2.5k1'
 MACH_NAME = 'Essetre-PFMAXrl'
 

MachNotes.ini

@@ -0,0 +1,50 @@
+; Commento per evitare BOM con UTF-8
+;Index = Type, Description, Default Value
+; Type : b=boolean, d=double, l=lenght, s=string
+
+[Drilling]
+
+[Sawing]
+
+[Milling]
+0=d,MaxElev,0
+1=d,OutRaw,0
+2=d,SideElev,0
+3=d,TrimExt,0
+4=sr,VtFaceUse,0,0,0
+
+[Pocketing]
+0=d,MaxElev,0
+1=b,Open,0
+2=d,OpenMinSave,0
+3=d,OpenOutRaw,0
+4=d,MaxOptSize,0
+
+[Mortising]
+0=d,MaxElev,0
+
+[Chiseling]
+
+[SawRoughing]
+
+[SawFinishing]
+
+[GenMachining]
+0=l,LinTol,0.1
+1=l,MaxLen,2
+2=s,Type,ZigZag
+3=d,SideAng,90
+4=l,Step,10
+5=l,OffsProj,0
+6=l,LiTang,0
+7=l,LiOrth,0
+8=l,LiElev,0
+9=l,LoTang,0
+10=l,LoOrth,0
+11=l,LoElev,0
+12=b,DirFromGuide,1
+
+[SurfRoughing]
+
+[SurfFinishing]
+0=b,SkipMaxDown,1

ToolNotes.ini

@@ -0,0 +1,41 @@
+; Commento per evitare BOM con UTF-8
+; Index, Type, Description, Value
+; Index = 0,1,..,n
+; Type : d=double, l=lenght, s=string, b=boolean, dr=double recalc, sr= string recalc, lr=lenght recalc, br=boolean recalc, th=toolholder
+; Description : STEP, SIDESTEP, ...
+
+[DRILL_STD]
+0=th,TH,
+1=d,STEP
+2=s,DOUBLE
+
+[SAW_STD]
+0=th,TH,
+1=d,STEP
+2=d,SIDESTEP
+3=b,LONGCUT
+
+[SAW_FLAT]
+0=th,TH,
+1=d,STEP
+2=d,SIDESTEP
+3=b,LONGCUT
+
+[MILL_STD]
+0=th,TH,
+1=d,STEP
+2=d,SIDESTEP
+3=d,SIDEDEPTH
+4=s,DOUBLE
+
+[MILL_NOTIP]
+0=th,TH,
+1=d,STEP
+2=d,SIDESTEP
+3=d,SIDEDEPTH
+4=s,DOUBLE
+
+[MORTISE_STD]
+0=b,MORTISE
+1=d,STEP
+2=d,SIDESTEP

UpdateLog.txt

@@ -1,5 +1,8 @@
            ==== Common_ONE-PF Update Log ====
 
+Versione 2.6-- (--/--/2024)
+- (SIM-GEN) Se motosega allineata ad asse B per tagli di fianco, corretto movimento che manda testa a parcheggio. Pezzi più alti di 650 va solo in Zmax. Ticket#1943
+
 Versione 2.6g4 (19/07/2024)
 - (SIM-GEN) Aumentato numero iterazioni per scambio carrelli (da 5 a 10), per pezzi lunghi 30m.
 

Version.lua

@@ -3,7 +3,7 @@
 
 local InfoCommon_STD_PP = {
    NAME = 'Common_ONE-PF',            -- nome script PP standard
-   VERSION = '2.6g4',                 -- versione script
+   VERSION = '2.6--',                 -- versione script
    MIN_MACH_VER_PP_COMMON = '2.5k1'   -- versione minima kernel
 }