Aggiunto scarico al carico in due step se lo scarico calcolato è oltre la corsa di Y1 (come su scarico in linea)

Beam/BeamData.lua

@@ -118,8 +118,8 @@ if EgtExistsFile( sDataBeam) then
          BeamData.USE_LONGCUT = SecondSaw or BeamData.USE_LONGCUT
          if Machine.Offsets.CUT_SIC then BeamData.CUT_SIC = EgtClamp( Machine.Offsets.CUT_SIC, 15, 50) end
          if Machine.Offsets.USE_PART_OFFSET then BeamData.USE_PART_OFFSET = ( Machine.Offsets.USE_PART_OFFSET == 1) end
-         if Machine.Offsets.MIN_JOIN_S then BeamData.MIN_JOIN_S = Machine.Offsets.MIN_JOIN_S end
-         if Machine.Offsets.MIN_JOIN_L then BeamData.MIN_JOIN_L = Machine.Offsets.MIN_JOIN_L end
+         if Machine.Offsets.MIN_JOIN_S then BeamData.MIN_JOIN_S = EgtClamp( Machine.Offsets.MIN_JOIN_S, 80, 150) end
+         if Machine.Offsets.MIN_JOIN_L then BeamData.MIN_JOIN_L = EgtClamp( Machine.Offsets.MIN_JOIN_L, 300, 450) end
       end
       if Machine.Trave then
          BeamData.MIN_WIDTH = Machine.Trave.XMIN or BeamData.MIN_WIDTH

Common_PF1250.TPA.mlpe

@@ -303,22 +303,29 @@ function OnDispositionEnd()
          -- Se è un'istruzione del piano ferma pezzo
          if EMT.MDCHAR[i].StopBeamStat then
             EmitStopBeam( EMT.MDCHAR[i])
+            EMT.LASTOISBRAKE = true
          else
             EmitMoveDataChars( EMT.MDCHAR[i])
             if EMT.MDCHAR[i].Y1 then EMT.CHY_ON = true end
             if EMT.MDCHAR[i].V1 then EMT.V1POS = EMT.MDCHAR[i].V1 end
             if EMT.MDCHAR[i].V2 then EMT.V2POS = EMT.MDCHAR[i].V2 end
+            EMT.LASTOISBRAKE = false
          end
       end
       if #EMT.MDCHAR > 0 then
-         local nMoveType = EgtIf( EMT.CHY_ON, 3, 2)
-         EmitMoveStartChars( nMoveType)
-         -- se dopo c'è scarico spezzone devo mettere attesa termine esecuzione
-         if IsRestPhase( EMT.PHASE + 1) then
-            EmitMoveWaitChars( nMoveType)
+         if not EMT.LASTOISBRAKE then
+            local nMoveType = EgtIf( EMT.CHY_ON, 3, 2)
+            EmitMoveStartChars( nMoveType)
+            -- se dopo c'è scarico spezzone devo mettere attesa termine esecuzione
+            if IsRestPhase( EMT.PHASE + 1) then
+               EmitMoveWaitChars( nMoveType)
+            else
+               EmitMoveWaitChars( nMoveType, true)
+            end
          else
-            EmitMoveWaitChars( nMoveType, true)
+            EMT.LASTOISBRAKE = nil
          end
+
          -- emissione conclusione pezzo precedente (se non in modalità test)
          if not TEST_USE and EMT.PRODID then
             local sEnd= 'M113 P1='..tostring( EMT.PRODID)..' P2='..tostring( EMT.PATTID)..' P3='..tostring( EMT.CUTID)..' P4=2' 
@@ -537,22 +544,28 @@ function OnMachiningEnd()
       -- Se è un'istruzione del piano ferma pezzo
       if EMT.MDCHAR[i].StopBeamStat then
          EmitStopBeam( EMT.MDCHAR[i])
+         EMT.LASTOISBRAKE = true
       else
          EmitMoveDataChars( EMT.MDCHAR[i])
+         EMT.LASTOISBRAKE = false
       end
    end
    if #EMT.MDCHAR > 0 then
       if EMT.AUXTYPE == 'S' then
-         EmitMoveStartChars( 1)
-         EmitMoveWaitChars( 1)
+         if not EMT.LASTOISBRAKE then
+            EmitMoveStartChars( 1)
+            EmitMoveWaitChars( 1)
+         end
       elseif EMT.AUXTYPE == 'U' then
-         local nMoveType = EgtIf( EMT.CHY_ON, 3, 2)
-         EmitMoveStartChars( nMoveType)
-         -- se dopo cè scarico spezzone devo mettere attesa termine esecuzione
-         if IsRestPhase( EMT.PHASE + 1) then
-            EmitMoveWaitChars( nMoveType)
-         else
-            EmitMoveWaitChars( nMoveType, true)
+         if not EMT.LASTOISBRAKE then
+            local nMoveType = EgtIf( EMT.CHY_ON, 3, 2)
+            EmitMoveStartChars( nMoveType)
+            -- se dopo cè scarico spezzone devo mettere attesa termine esecuzione
+            if IsRestPhase( EMT.PHASE + 1) then
+               EmitMoveWaitChars( nMoveType)
+            else
+               EmitMoveWaitChars( nMoveType, true)
+            end
          end
          -- emissione conclusione pezzo precedente (se non è modalità test)
          if not TEST_USE and EMT.PRODID then
@@ -560,8 +573,10 @@ function OnMachiningEnd()
             MyOutput( sEnd)
          end
       elseif EMT.AUXTYPE == 'P' then
-         EmitMoveStartChars( 3)
-         EmitMoveWaitChars( 3)
+         if not EMT.LASTOISBRAKE then
+            EmitMoveStartChars( 3)
+            EmitMoveWaitChars( 3)
+         end
          if EMT.FALL then
             MyOutput( 'M155')
             -- emissione conclusione pezzo (se non in modalità test)
@@ -2215,6 +2230,12 @@ function PreparePreRotation( sCmd, nInd)
             MDChar = { [Cmd[2]]=tonumber(Cmd[3]), IniStatY1=86, FinStatY1=87, IniStatY2=1, BeamVise=0}
          end
          table.insert( EMT.MDCHAR, MDChar)
+         -- Se scarico in linea con abbassamento piano ferma pezzo allo scarico
+         if Cmd[4] == 'UnBrakeBeam' then
+            -- Abbassa ferma pezzo
+            local MDStopBeam = { StopBeamStat=2, Load=1}
+            table.insert( EMT.MDCHAR, MDStopBeam)
+         end
       end
    elseif Cmd[1] == '2' then
       local MDChar = { IniStatY1=EMT.ISY1, FinStatY1=EMT.FSY1, IniStatY2=EMT.ISY2, FinStatY2=EMT.FSY2, IniStatV2=1, BeamVise=EMT.BV}
@@ -2226,6 +2247,11 @@ function PreparePreRotation( sCmd, nInd)
          EMT.ROLL_IN = nil
       end
       table.insert( EMT.MDCHAR, MDChar)
+      -- Alza ferma pezzo
+      if Cmd[6] == 'BrakeBeam' then
+         local MDStopBeam = { StopBeamStat=1, Load=1}
+         table.insert( EMT.MDCHAR, MDStopBeam)
+      end
    elseif Cmd[1] == '3' then
       local MDChar = { IniStatY1=EMT.ISY1, FinStatY1=EMT.FSY1, IniStatY2=EMT.ISY2, FinStatY2=EMT.FSY2, IniStatV1=1, IniStatV2=1, BeamVise=EMT.BV}
       if Cmd[2] ~= 'T' then MDChar[Cmd[2]] = tonumber( Cmd[3]) end
@@ -3136,11 +3162,16 @@ end
 ---------------------------------------------------------------------
 -- Emette i movimenti di esecuzione movimenti trave e alzata o discesa del piano ferma pezzo
 function EmitStopBeam( MoData)
-   EmitMoveStartChars(2)
-   EmitMoveWaitChars(2)
    if MoData.StopBeamStat then
-      local sUnloadSide = EgtIf( MoData.Load, 'P1=', 'P2=')
-      sOut = 'M125 ' .. sUnloadSide .. EgtNumToString( MoData.StopBeamStat, 0)
+      if MoData.Load then
+         EmitMoveStartChars( 3)
+         EmitMoveWaitChars( 3)
+         sOut = 'M125 P1=' .. EgtNumToString( MoData.StopBeamStat, 0)
+      else
+         EmitMoveStartChars( 2)
+         EmitMoveWaitChars( 2)
+         sOut = 'M125 P2=' .. EgtNumToString( MoData.StopBeamStat, 0)
+      end
    end
    MyOutput( sOut)
 end

Common_PF1250.mlse

@@ -1226,7 +1226,9 @@ function SpecCalcCarriages( dDistFront, dDistBack, dRollFront, dRollBack, dY1Del
       WorkTab.dY1DeltaMaxF = min( EMC.LB - MinJoin, MaxY1 + dDistFront + dRollFront + AGG_V)
       WorkTab.dY2DeltaMinF = max( MinJoin + EMC.HCING + EMC.HOVM, EMC.LB + MinY2 - dMyDistBack - AGG_V - dRollBack)
       WorkTab.dY2DeltaMaxF = min( dDistFront, EMC.LB - MyMinOther)   --  - EMC.TCING
-      if dY1DeltaMaxSP then WorkTab.dY1DeltaMaxF = min( WorkTab.dY1DeltaMaxF, dY1DeltaMaxSP) end
+      if dY1DeltaMaxSP and dY1DeltaMaxSP > WorkTab.dY1DeltaMinF then
+         WorkTab.dY1DeltaMaxF = min( WorkTab.dY1DeltaMaxF, dY1DeltaMaxSP)
+      end
       if dY2DeltaMinUL then WorkTab.dY2DeltaMinF = max( WorkTab.dY2DeltaMinF, dY2DeltaMinUL) end
       WorkTab.dV1PosF = dRollBack
       WorkTab.bV1CloseF = false
@@ -1392,7 +1394,22 @@ function SpecCalcUnloadOnLoadPos()
    end
    -- riporto la trave al carico
    local dRotT = LoadT + TurnerOffs
-   table.insert( vCmd, { 2, 'Y1', dRotT + EMC.Y1DELTA, 'T', dRotT, 'BrakeBeam'})
+   local dY1Move = dRotT + EMC.Y1DELTA
+   if dY1Move > MaxY1 then
+      local dRotTStep, dY1MoveStep = dRotT - dY1Move + MaxY1, MaxY1
+      if MinBeamLenUnloadInLine and EMC.LB >= MinBeamLenUnloadInLine then
+         table.insert( vCmd, { 2, 'Y1', dY1MoveStep, 'T', dRotTStep, 'BrakeBeam'})
+         -- apro la morsa
+         table.insert( vCmd, { 11, 0})
+         -- riporto il carrello in fondo alla trave
+         dY1MoveStep = dRotTStep + ( EMC.HCING or 0)
+         dY1Move = dY1MoveStep + dY1Move - MaxY1
+         table.insert( vCmd, { 1, 'Y1', dY1MoveStep, 'UnBrakeBeam'})
+         -- chiudo la morsa
+         table.insert( vCmd, { 11, 1})
+      end
+   end
+   table.insert( vCmd, { 2, 'Y1', dY1Move, 'T', dRotT, 'BrakeBeam'})
    -- apro la morsa
    table.insert( vCmd, { 11, 0})
    EMC.CNT = nil

Essetre-PF1250-3T_5Ax.mlde

@@ -5,7 +5,7 @@
 require( 'EmtGenerator')
 EgtEnableDebug( false)
 
-PP_VER = '3.1a2_DEV18'
+PP_VER = '3.1a2_DEV23'
 PP_NVER = '3.1.1.2'
 MIN_MACH_VER = '2.7d2'
 MACH_NAME = EgtGetCurrMachineName()