- rimossi file da ignorare

SetUp/Standard.stu

@@ -1,13 +0,0 @@
-; Commento per evitare BOM con UTF-8
-[General]
-Pos1=T1;H1;1/C3757367-5A3A-4C78-9C9C-11356AC20964/Fresa_25x130
-Pos2=T2;H1;1/3A7E2F29-2D91-43B9-9FD6-42CABEF0FEBC/Fresa_40x180
-Pos3=T3;H1;1/E4C2AB7B-DE35-4D7C-B7F9-2B85DE33BB41/Fresa_70x85
-Pos4=T4
-Pos5=T5
-Pos6=T6
-Pos7=T7
-Pos8=T8
-Pos9=T42;H2;1/CB740F1F-09FB-450F-B202-9654828544EC/SawBlade_800
-Pos10=T101;H3;1/A6CFDA65-DABB-441E-990A-776B5C24C2E4/Elettrosega
-Pos11=T11;H11;1/C6F17A98-329D-410A-A339-51059CCE1A83/31

Wall/CutData.lua

@@ -1,10 +0,0 @@
--- CutData.lua by Egaltech s.r.l.   04/07/2023 11:51:37
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local CutData = {
-   { On = true, Name = 'Cutting800', Type = 'Standard'}
-}
-
----------------------------------------------------------------------
-return CutData

Wall/DrillData.lua

@@ -1,11 +0,0 @@
--- DrillData.lua by Egaltech s.r.l.   04/07/2023 11:50:14
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local DrillData = {
-   { On = true, Name = 'DrillD6', Type = 'Drill'},
-   { On = true, Name = 'DrillPocking_25', Type = 'Pocket'}
-}
-
----------------------------------------------------------------------
-return DrillData

Wall/MillingData.lua

@@ -1,13 +0,0 @@
--- MillingData.lua by Egaltech s.r.l.   04/07/2023 12:30:29
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local MillingData = {
-   { On = true, Name = 'Mill25x130_H1', Type = 'FreeContour'},
-   { On = true, Name = 'Mill40X180_H1', Type = 'FreeContour'},
-   { On = true, Name = 'Milling200x63', Type = 'Side'},
-   { On = true, Name = 'Nailing_31', Type = 'Nailing'}
-}
-
----------------------------------------------------------------------
-return MillingData

Wall/PocketingData.lua

@@ -1,13 +0,0 @@
--- PocketingData.lua by Egaltech s.r.l.   04/07/2023 11:50:01
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local PocketingData = {
-   { On = false, Name = 'Pocketing_20', Type = 'Pocket'},
-   { On = true, Name = 'Pocket_70X85', Type = 'Pocket'},
-   { On = true, Name = 'Pocket_25x130', Type = 'Pocket'},
-   { On = true, Name = 'Pocket_40X180', Type = 'Pocket'}
-}
-
----------------------------------------------------------------------
-return PocketingData

Wall/SawingData.lua

@@ -1,10 +0,0 @@
--- SawingData.lua by Egaltech s.r.l.   04/07/2023 11:50:28
--- Gestione dati lavorazioni per Travi
-
--- Tabella per definizione modulo
-local SawingData = {
-   { On = true, Name = 'TaglioCatena', Type = 'Sawing'}
-}
-
----------------------------------------------------------------------
-return SawingData

Wall/Ts3Data.lua

@@ -1,55 +0,0 @@
-local Offsets = {
-   MIN_Y=-15320,
-   MAX_Y=0,
-   MIN_X=-4820,
-   MAX_X=0,
-   MIN_Z=-1320,
-   MAX_Z=0,
-   MIN_B=-135,
-   MAX_B=135,
-   MIN_C=-275,
-   MAX_C=275,
-   MIN_U=-5570,
-   MAX_U=-750,
-   MIN_W=-1000,
-   MAX_W=0,
-   MIN_V=0,
-   MAX_V=90,
-   MIN_A=-275,
-   MAX_A=275,
-   ZERO_X_MILL=-1035.4,
-   ZERO_Y_MILL=-1009.0,
-   ZERO_Z_MILL=-1117.6,
-   PIVOT_MILL=170.0,
-   ZERO_X_SAW=-1035.4,
-   ZERO_Y_SAW=-661,
-   ZERO_Z_SAW=-825.6,
-   PIVOT_SAW=154.0,
-   ZERO_NAIL11_X =-900.0,
-   ZERO_NAIL11_Y =-647.0,
-   ZERO_NAIL11_Z =-1126.0,
-   OFFSET_ZERO2_X=-3500,
-   OFFSET_ZERO2_Y=0,
-   OFFSET_ZERO2_Z=0,
-   OFFSET_ZERO3_X=0,
-   OFFSET_ZERO3_Y=-13920,
-   OFFSET_ZERO3_Z=0,
-   OFFSET_ZERO4_X=-3500,
-   OFFSET_ZERO4_Y=-13920,
-   OFFSET_ZERO4_Z=0,
-   INTRULLI=1200,
-   DELTA_X=0,
-   DELTA_Y=0,
-}
-
-local Trave = {
-   XMIN=20,
-   XMAX=3500,
-   YMIN=50,
-   YMAX=13000,
-   ZMIN=1,
-   ZMAX=300,
-}
-
-local Machine = { Offsets=Offsets, Trave=Trave}
-return Machine