EgtBEAMWALL 2.6f1 :

- correzioni a gestione riferimento di feature entrando in modifica Freecontour.

EgtBEAMWALL.Core/Constants/ConstBeam.vb

@@ -144,8 +144,6 @@
    Public Const BTL_PRT_INVERTED As String = "INVERTED"
    Public Const BTL_PRT_MATERIAL As String = "MATERIAL"
    Public Const BTL_PRT_VOLUME As String = "VOLUME"
-   Public Const BTL_PRT_ROT As String = "ROT"
-   Public Const BTL_PRT_FLIP As String = "FLIP"
    ' parametri pezzo
    Public Const BTL_PRT_SINGLEMEMBERNUM = "SINGLEMEMBERNUMBER"
    Public Const BTL_PRT_ASSEMBLYNUM = "ASSEMBLYNUMBER"

EgtBEAMWALL.Core/MachGroupModel/PartM.vb

@@ -482,8 +482,6 @@ Public Class PartM
       EgtGetInfo(nPartId, BTL_PRT_GROUP, NewPartM.m_sGROUP)
       EgtGetInfo(nPartId, BTL_PRT_STOREY, NewPartM.m_sSTOREY)
       EgtGetInfo(nPartId, BTL_PRT_MATERIAL, NewPartM.m_sMATERIAL)
-      EgtGetInfo(nPartId, BTL_PRT_ROT, NewPartM.m_dROT)
-      EgtGetInfo(nPartId, BTL_PRT_FLIP, NewPartM.m_nFLIP)
       Dim nTemp As Integer = 0
       If Not EgtGetInfo(nPartId, BTL_PRT_ROTATED, nTemp) Then
          nTemp = 0

EgtBEAMWALL.Core/My Project/AssemblyInfo.vb

@@ -16,7 +16,7 @@ Imports System.Runtime.InteropServices
 <Assembly: AssemblyDescription("")>
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("EgtBEAMWALL.Core")>
-<Assembly: AssemblyCopyright("Copyright ©  2020-2023 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2020-2024 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 
 <Assembly: ComVisible(False)>
@@ -35,5 +35,5 @@ Imports System.Runtime.InteropServices
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.12.2")>
-<Assembly: AssemblyFileVersion("2.5.12.2")>
+<Assembly: AssemblyVersion("2.6.6.1")>
+<Assembly: AssemblyFileVersion("2.6.6.1")>

EgtBEAMWALL.DataLayer/Properties/AssemblyInfo.cs

@@ -10,7 +10,7 @@ using System.Runtime.InteropServices;
 [assembly: AssemblyConfiguration("")]
 [assembly: AssemblyCompany("Egalware s.r.l.")]
 [assembly: AssemblyProduct("EgtBEAMWALL.DataLayer")]
-[assembly: AssemblyCopyright("Copyright ©  2020-2023 by Egalware s.r.l.")]
+[assembly: AssemblyCopyright("Copyright ©  2020-2024 by Egalware s.r.l.")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]
 
@@ -32,5 +32,5 @@ using System.Runtime.InteropServices;
 // You can specify all the values or you can default the Build and Revision Numbers
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("2.5.12.2")]
-[assembly: AssemblyFileVersion("2.5.12.2")]
+[assembly: AssemblyVersion("2.6.6.1")]
+[assembly: AssemblyFileVersion("2.6.6.1")]

EgtBEAMWALL.Supervisor/MainWindow/MainWindowM.vb

@@ -248,8 +248,8 @@ Public Class MainWindowM
          EgtSetLockId( sLockId)
       End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2512, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5327, 2512, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2606, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(5327, 2606, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & SUPGENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

EgtBEAMWALL.Supervisor/My Project/AssemblyInfo.vb

@@ -30,7 +30,7 @@ Imports System.Windows
 #End if
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("EgtBEAMWALL.Supervisor")>
-<Assembly: AssemblyCopyright("Copyright ©  2020-2023 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2020-2024 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(false)>
 
@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.12.2")>
-<Assembly: AssemblyFileVersion("2.5.12.2")>
+<Assembly: AssemblyVersion("2.6.1.1")>
+<Assembly: AssemblyFileVersion("2.6.1.1")>

EgtBEAMWALL.ViewerOptimizer/FreeContourManager/FreeContourManagerVM.vb

@@ -427,7 +427,7 @@ Public Class FreeContourManagerVM
       ' posiziono la griglia sul riferimento del contorno libero
       Dim frFace As New Frame3d
       EgtBeamGetSideData(SelFeature.nSelSIDE, frFace)
-      Dim frFrame As Frame3d = SelFeature.BTLFeatureM.frFRAME
+      Dim frFrame As New Frame3d( SelFeature.BTLFeatureM.frFRAME)
       frFrame.ToGlob( frFace)
       EgtSetGridFrame(frFrame)
       EgtSetGridShow(True, True)

EgtBEAMWALL.ViewerOptimizer/LeftPanel/LeftPanelVM.vb

@@ -794,12 +794,6 @@ Public Class LeftPanelVM
          EgtSetMode(nDuploId, GDB_MD.STD)
          nPartDuploIdList.Add(nDuploId)
       Next
-      '' salvo lista info
-      Dim saveInfoBeamList As MyMachGroupVM = BeamMachGroup
-      'Dim saveInfoBeamList As New List(Of PartVM)
-      'For Each info As PartVM In BeamMachGroup.PartVMList
-      '   saveInfoBeamList.Add(info)
-      'Next
       ' calcolo posizione nuovo pezzo per rispettare ordine lunghezze
       Dim nInsertIndex As Integer
       ' scrivo dati di tutti i pezzi
@@ -858,38 +852,7 @@ Public Class LeftPanelVM
       End While
       Dim sLogPath As String = Map.refMainWindowVM.MainWindowM.sTempDir & "\RawPartLog.txt"
       If Not ExecBeam(sLogPath, Map.refMachinePanelVM.SelectedMachine.Name, CalcIntegration.CmdTypes.RAWPART, False) Then
-         EgtOutLog("Fallito inserimento grezzo nella barra in AddPartToBeam")
-
-         ' elimino duplo 
-         For Each nDuploId In nPartDuploIdList
-            EgtErase(nDuploId)
-            EgtRemoveRawPart(nDuploId)
-         Next
-
-         ' rimuovo info duplo e aggiorno info grezzo
-         nPartIndex = 0
-         For nIndex = 0 To BeamMachGroup.PartVMList.Count - 1
-            If nPartIndex < nPartDuploIdList.Count() AndAlso BeamMachGroup.PartVMList(nIndex).dL > PartsToAdd(0).dL Then
-               EgtRemoveInfo(BeamMachGroup.Id, MGR_RPT_PART & nIndex + 1)
-               nPartIndex += 1
-            ElseIf nPartIndex < nPartDuploIdList.Count() AndAlso BeamMachGroup.PartVMList(nIndex).dL < PartsToAdd(0).dL Then
-               EgtRemoveInfo(BeamMachGroup.Id, MGR_RPT_PART & nIndex + 1)
-               nPartIndex += 1
-            End If
-            EgtRemoveInfo(BeamMachGroup.Id, MGR_RPT_PART & nIndex + nPartIndex + 1)
-            EgtSetInfo(BeamMachGroup.Id, MGR_RPT_PART & nIndex + 1, BeamMachGroup.PartVMList(nIndex).nPartId & "," & DoubleToString(BeamMachGroup.PartVMList(nIndex).dPOSX, 3))
-         Next
-
-         ' elimino vecchio grezzo ed eseguo script creazione nuovo
-         nRawId = EgtGetFirstRawPart()
-         While nRawId <> GDB_ID.NULL
-            EgtRemoveRawPart(nRawId)
-            nRawId = EgtGetFirstRawPart()
-         End While
-
-         If Not ExecBeam(sLogPath, Map.refMachinePanelVM.SelectedMachine.Name, CalcIntegration.CmdTypes.RAWPART, False) Then
-            EgtOutLog("Fallita esecuzione ExecBeam. ERRORE")
-         End If
+         Return False
       End If
       For nDuploIndex = 0 To PartsToAdd.Count - 1
          EgtSetInfo(nPartDuploIdList(nDuploIndex), MGR_PRT_ROT, PartsToAdd(nDuploIndex).nROTATED)
@@ -898,11 +861,7 @@ Public Class LeftPanelVM
       ' aggiorno lista pezzi
       BeamMachGroup.MyMachGroupM.RefreshPartList()
       ' seleziono pezzo aggiunto
-      If BeamMachGroup.PartVMList.Count > nInsertIndex Then
-         BeamMachGroup.SelPart = BeamMachGroup.PartVMList(nInsertIndex)
-      Else
-         BeamMachGroup.SelPart = BeamMachGroup.PartVMList(nInsertIndex - 1)
-      End If
+      If BeamMachGroup.PartVMList.Count > nInsertIndex Then BeamMachGroup.SelPart = BeamMachGroup.PartVMList(nInsertIndex)
       Return True
    End Function
 

EgtBEAMWALL.ViewerOptimizer/MachGroupPanel/PartVM.vb

@@ -201,47 +201,19 @@ Public Class PartVM
             ' recupero box del layer box
             Dim b3Box As New BBox3d
             EgtGetBBoxGlob(nBoxLayerId, GDB_BB.STANDARD, b3Box)
-            Dim vtAxes As Vector3d
-            ' se travi ruoto attorno all'asse Z
-            If Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.BEAM Then
-               vtAxes = Vector3d.Z_AX
-               ' se pareti ruoto attorno all'asse X
-            ElseIf Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.WALL Then
-               vtAxes = Vector3d.X_AX
-            End If
-            If EgtRotate(nPartId, b3Box.Center, vtAxes, 180, GDB_RT.GLOB) Then
+            If EgtRotate(nPartId, b3Box.Center, Vector3d.X_AX, 180, GDB_RT.GLOB) Then
                m_PartM.nFLIP = If(value, 180, 0)
                EgtSetInfo(nPartId, MGR_PRT_FLIP, If(value, 180, 0))
             Else
                NotifyPropertyChanged(NameOf(bFLIP))
             End If
-            If Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.WALL Then
-               ' recupero box del pezzo
-               Dim b3Part As New BBox3d
-               EgtGetBBoxGlob(nPartId, GDB_BB.STANDARD, b3Part)
-               ' calcolo distanza tra i box
-               Dim vtDeltaBox As Vector3d = b3Box.Min - b3Part.Min
-               ' reinserisco il pezzo nel grezzo
-               EgtAddPartToRawPart(nPartId, New Point3d(dTempPosX - vtDeltaBox.x, dTempPosY - vtDeltaBox.y, 0), ParentMachGroupVM.MyMachGroupM.nRawPartId)
-            ElseIf Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.BEAM Then
-               ' elimino vecchio grezzo ed eseguo script creazione nuovo
-               DeleteOldRaw()
-               Dim sLogPath As String = Map.refMainWindowVM.MainWindowM.sTempDir & "\RawPartLog.txt"
-               If Not ExecBeam(sLogPath, Map.refMachinePanelVM.SelectedMachine.Name, CalcIntegration.CmdTypes.RAWPART, False) Then
-                  EgtOutLog("Fallita creazione barra nell'ExecBeam in bFlip")
-                  ' elimino vecchio grezzo ed eseguo script creazione nuovo
-                  DeleteOldRaw()
-                  If EgtRotate(nPartId, b3Box.Center, vtAxes, 180, GDB_RT.GLOB) Then
-                     m_PartM.nFLIP = 180
-                     EgtSetInfo(nPartId, MGR_PRT_FLIP, 180)
-                  Else
-                     NotifyPropertyChanged(NameOf(m_PartM.nFLIP))
-                  End If
-                  If Not ExecBeam(sLogPath, Map.refMachinePanelVM.SelectedMachine.Name, CalcIntegration.CmdTypes.RAWPART, False) Then
-                     EgtOutLog("Fallita esecuzione ExecBeam. ERRORE")
-                  End If
-               End If
-            End If
+            ' recupero box del pezzo
+            Dim b3Part As New BBox3d
+            EgtGetBBoxGlob(nPartId, GDB_BB.STANDARD, b3Part)
+            ' calcolo distanza tra i box
+            Dim vtDeltaBox As Vector3d = b3Box.Min - b3Part.Min
+            ' reinserisco il pezzo nel grezzo
+            EgtAddPartToRawPart(nPartId, New Point3d(dTempPosX - vtDeltaBox.x, dTempPosY - vtDeltaBox.y, 0), ParentMachGroupVM.MyMachGroupM.nRawPartId)
             ' lo riseleziono
             EgtSelectObj(nPartId)
             ' resetto validazione del pezzo
@@ -317,140 +289,66 @@ Public Class PartVM
    End Sub
 
    Private Sub Rotate(IsPositive As Boolean)
-      If Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.BEAM Then
-         ' elimino vecchio grezzo ed eseguo script creazione nuovo
-         DeleteOldRaw()
-         ' recupero layer del box
-         Dim nBoxLayerId As Integer = EgtGetFirstNameInGroup(nPartId, "Box")
-         ' recupero box del layer box
-         Dim b3Box As New BBox3d
-         EgtGetBBoxGlob(nBoxLayerId, GDB_BB.STANDARD, b3Box)
-         ' se invertito lo reinverto
-         If bFLIP Then EgtRotate(nPartId, b3Box.Center, Vector3d.Z_AX, 180, GDB_RT.GLOB)
-         ' eseguo rotazione attorno asse X
-         Dim dRot As Integer = 0
-         If dW <> dH Then
-            dRot = If(IsPositive, 180, -180)
-         ElseIf dW = dH Then
-            dRot = If(IsPositive, 90, -90)
+      ' salvo posizione 
+      Dim dTempPosX As Double = m_PartM.dPOSX
+      Dim dTempPosY As Double = m_PartM.dPOSY
+      ' tolgo il pezzo dal grezzo
+      EgtRemovePartFromRawPart(nPartId)
+      ' recupero layer del box
+      Dim nBoxLayerId As Integer = EgtGetFirstNameInGroup(nPartId, "Box")
+      ' recupero box del layer box
+      Dim b3Box As New BBox3d
+      EgtGetBBoxGlob(nBoxLayerId, GDB_BB.STANDARD, b3Box)
+      ' se invertito lo reinverto
+      Dim bFliped As Boolean = bFLIP
+      If bFliped Then EgtRotate(nPartId, b3Box.Center, Vector3d.X_AX, 180, GDB_RT.GLOB)
+      Dim dAng As Double = If(IsPositive, 90, -90)
+      ' eseguo rotazione
+      Dim bOk As Boolean = EgtRotate(nPartId, b3Box.Center, -Vector3d.Z_AX, dAng, GDB_RT.GLOB)
+      If bOk Then
+         Dim TempRot = m_PartM.dROT
+         TempRot += dAng
+         If TempRot >= 360 Then
+            TempRot -= 360
+         ElseIf TempRot < 0 Then
+            TempRot += 360
          End If
-         Dim bOk As Boolean = EgtRotate(nPartId, b3Box.Center, Vector3d.X_AX, dRot, GDB_RT.GLOB)
-         If bOk Then
-            Dim TempRot = m_PartM.dROT
-            TempRot += dRot
-            If TempRot >= 360 Then
-               TempRot -= 360
-            ElseIf TempRot < 0 Then
-               TempRot += 360
-            End If
-            m_PartM.dROT = TempRot
-            EgtSetInfo(nPartId, MGR_PRT_ROT, m_PartM.dROT)
-         End If
-         ' ripristino eventuale inversione
-         If bFLIP Then EgtRotate(nPartId, b3Box.Center, Vector3d.Z_AX, 180, GDB_RT.GLOB)
-         Dim sLogPath As String = Map.refMainWindowVM.MainWindowM.sTempDir & "\RawPartLog.txt"
-         If Not ExecBeam(sLogPath, Map.refMachinePanelVM.SelectedMachine.Name, CalcIntegration.CmdTypes.RAWPART, False) Then
-            EgtOutLog("Fallita creazione barra nell'ExecBeam in Rotate")
-            ' elimino vecchio grezzo ed eseguo script creazione nuovo
-            DeleteOldRaw()
-            ' annullo Flip
-            If bFLIP Then EgtRotate(nPartId, b3Box.Center, Vector3d.Z_AX, 180, GDB_RT.GLOB)
-            ' ripristino rotazione
-            Dim dRotation As Integer = 0
-            If dW <> dH Then
-               dRotation = m_PartM.dROT + dRot
-               m_PartM.dROT = dRotation
-               If dRotation >= 360 Then
-                  dRotation = dRot
-                  m_PartM.dROT = 0
-               End If
-            ElseIf dW = dH Then
-               dRotation = m_PartM.dROT - dRot
-               If dRotation = 0 Then
-                  dRotation = 3 * dRot
-                  m_PartM.dROT = 0
-               ElseIf dRotation = 90 Then
-                  dRotation += 2 * dRot
-                  m_PartM.dROT = 90
-               ElseIf dRotation = 180 Then
-                  dRotation += dRot
-                  m_PartM.dROT = 180
-               ElseIf dRotation < 0 Then
-                  dRotation += 4 * dRot
-                  m_PartM.dROT = 270
-               End If
-            End If
-            EgtRotate(nPartId, b3Box.Center, Vector3d.X_AX, dRotation, GDB_RT.GLOB)
-            ' salvo informazione
-            EgtSetInfo(nPartId, MGR_PRT_ROT, m_PartM.dROT)
-            ' annullo Flip
-            If bFLIP Then EgtRotate(nPartId, b3Box.Center, Vector3d.Z_AX, 180, GDB_RT.GLOB)
-            If Not ExecBeam(sLogPath, Map.refMachinePanelVM.SelectedMachine.Name, CalcIntegration.CmdTypes.RAWPART, False) Then
-               EgtOutLog("Fallita esecuzione ExecBeam. ERRORE")
-            End If
-            NotifyPropertyChanged(NameOf(m_PartM.dROT))
-         End If
-      ElseIf Map.refProjectVM.BTLStructureVM.nPROJTYPE = BWType.WALL Then
-         ' salvo posizione 
-         Dim dTempPosX As Double = m_PartM.dPOSX
-         Dim dTempPosY As Double = m_PartM.dPOSY
-         ' tolgo il pezzo dal grezzo
-         EgtRemovePartFromRawPart(nPartId)
-         ' recupero layer del box
-         Dim nBoxLayerId As Integer = EgtGetFirstNameInGroup(nPartId, "Box")
-         ' recupero box del layer box
-         Dim b3Box As New BBox3d
-         EgtGetBBoxGlob(nBoxLayerId, GDB_BB.STANDARD, b3Box)
-         ' se invertito lo reinverto
-         If bFLIP Then EgtRotate(nPartId, b3Box.Center, Vector3d.X_AX, 180, GDB_RT.GLOB)
-         Dim dAng As Double = If(IsPositive, 90, -90)
-         ' eseguo rotazione
-         Dim bOk As Boolean = EgtRotate(nPartId, b3Box.Center, -Vector3d.Z_AX, dAng, GDB_RT.GLOB)
-         If bOk Then
-            Dim TempRot = m_PartM.dROT
-            TempRot += dAng
-            If TempRot >= 360 Then
-               TempRot -= 360
-            ElseIf TempRot < 0 Then
-               TempRot += 360
-            End If
-            m_PartM.dROT = TempRot
-            EgtSetInfo(nPartId, MGR_PRT_ROT, m_PartM.dROT)
-         End If
-         ' ripristino eventuale inversione
-         If bFLIP Then EgtRotate(nPartId, b3Box.Center, Vector3d.X_AX, 180, GDB_RT.GLOB)
-         ' recupero box del pezzo
-         Dim b3Part As New BBox3d
-         EgtGetBBoxGlob(nPartId, GDB_BB.STANDARD, b3Part)
-         'aggiorno box del box con rotazione
-         EgtGetBBoxGlob(nBoxLayerId, GDB_BB.STANDARD, b3Box)
-         ' calcolo distanza tra i box
-         Dim vtDeltaBox As Vector3d = b3Box.Min - b3Part.Min   ' Vector3d.NULL
-         ' calcolo posizione rispetto al riferimento
-         Select Case Map.refProjectVM.BTLStructureVM.nPROJTYPE
-            Case BWType.WALL
-               ' se parete, valuto angolo di posizionamento
-               Select Case CurrentMachine.NestingCorner
-                  Case MCH_CR.TL
-                     'vtDeltaBox = New Vector3d(b3Box.Min.x - b3Part.Min.x, b3Box.Max.y - b3Part.Max.y, 0)
-                     dTempPosY = dTempPosY - dW + dL
-                  Case MCH_CR.BL
+         m_PartM.dROT = TempRot
+         EgtSetInfo(nPartId, MGR_PRT_ROT, m_PartM.dROT)
+      End If
+      ' ripristino eventuale inversione
+      If bFliped Then EgtRotate(nPartId, b3Box.Center, Vector3d.X_AX, 180, GDB_RT.GLOB)
+      ' recupero box del pezzo
+      Dim b3Part As New BBox3d
+      EgtGetBBoxGlob(nPartId, GDB_BB.STANDARD, b3Part)
+      'aggiorno box del box con rotazione
+      EgtGetBBoxGlob(nBoxLayerId, GDB_BB.STANDARD, b3Box)
+      ' calcolo distanza tra i box
+      Dim vtDeltaBox As Vector3d = b3Box.Min - b3Part.Min   ' Vector3d.NULL
+      ' calcolo posizione rispetto al riferimento
+      Select Case Map.refProjectVM.BTLStructureVM.nPROJTYPE
+         Case BWType.WALL
+            ' se parete, valuto angolo di posizionamento
+            Select Case CurrentMachine.NestingCorner
+               Case MCH_CR.TL
+                  'vtDeltaBox = New Vector3d(b3Box.Min.x - b3Part.Min.x, b3Box.Max.y - b3Part.Max.y, 0)
+                  dTempPosY = dTempPosY - dW + dL
+               Case MCH_CR.BL
                   'vtDeltaBox = b3Box.Min - b3Part.Min
                   ' non cambio posizioni
-                  Case MCH_CR.TR
-                     'vtDeltaBox = b3Box.Max - b3Part.Max
-                     dTempPosX = dTempPosX - dL + dW
-                     dTempPosY = dTempPosY - dW + dL
-                  Case MCH_CR.BR
-                     'vtDeltaBox = New Vector3d(b3Box.Max.x - b3Part.Max.x, b3Box.Min.y - b3Part.Min.y, 0)
-                     dTempPosX = dTempPosX - dL + dW
-               End Select
-            Case Else
-               ' non cambio nulla
-         End Select
-         ' reinserisco il pezzo nel grezzo
-         EgtAddPartToRawPart(nPartId, New Point3d(dTempPosX - vtDeltaBox.x, dTempPosY - vtDeltaBox.y, 0), ParentMachGroupVM.MyMachGroupM.nRawPartId)
-      End If
+               Case MCH_CR.TR
+                  'vtDeltaBox = b3Box.Max - b3Part.Max
+                  dTempPosX = dTempPosX - dL + dW
+                  dTempPosY = dTempPosY - dW + dL
+               Case MCH_CR.BR
+                  'vtDeltaBox = New Vector3d(b3Box.Max.x - b3Part.Max.x, b3Box.Min.y - b3Part.Min.y, 0)
+                  dTempPosX = dTempPosX - dL + dW
+            End Select
+         Case Else
+            ' non cambio nulla
+      End Select
+      ' reinserisco il pezzo nel grezzo
+      EgtAddPartToRawPart(nPartId, New Point3d(dTempPosX - vtDeltaBox.x, dTempPosY - vtDeltaBox.y, 0), ParentMachGroupVM.MyMachGroupM.nRawPartId)
       ' lo riseleziono
       EgtSelectObj(nPartId)
       ' resetto validazione del pezzo
@@ -458,14 +356,6 @@ Public Class PartVM
       NotifyPropertyChanged(NameOf(sROT))
    End Sub
 
-   Private Sub DeleteOldRaw()
-      Dim nRawId As Integer = EgtGetFirstRawPart()
-      While nRawId <> GDB_ID.NULL
-         EgtRemoveRawPart(nRawId)
-         nRawId = EgtGetFirstRawPart()
-      End While
-   End Sub
-
    Friend Sub SelectBTLPart()
       ' eseguo la selezione nella lista pezzi
       Dim nBTLPartId As Integer = MyMachGroupPanelM.DuploGetOriginal(nPartId)

EgtBEAMWALL.ViewerOptimizer/MainWindow/MainWindowM.vb

@@ -242,8 +242,8 @@ Public Class MainWindowM
          EgtSetLockId( sLockId)
       End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2512, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5327, 2512, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2606, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(5327, 2606, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & VWOPTGENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

EgtBEAMWALL.ViewerOptimizer/My Project/AssemblyInfo.vb

@@ -30,7 +30,7 @@ Imports System.Windows
 #End If
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("EgtBEAMWALL.ViewerOptimizer")>
-<Assembly: AssemblyCopyright("Copyright ©  2020-2023 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2020-2024 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(false)>
 
@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.12.2")>
-<Assembly: AssemblyFileVersion("2.5.12.2")>
+<Assembly: AssemblyVersion("2.6.6.1")>
+<Assembly: AssemblyFileVersion("2.6.6.1")>