- commentati log

EgtBEAMWALL.Supervisor/LeftPanel/LeftPanelVM.vb

@@ -40,7 +40,7 @@ Public Class LeftPanelVM
          Return m_SelChannel
       End Get
       Set(ByVal value As IdNameStruct)
-         MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.SETCHANNEL, value.Id))
+         MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.SETCHANNEL, value.Id))
          m_SelChannel = value
       End Set
    End Property
@@ -86,7 +86,7 @@ Public Class LeftPanelVM
          Return m_SelOPMode
       End Get
       Set(ByVal value As OPState)
-         MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.SETOPMODE, value.Id))
+         MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.SETOPMODE, value.Id))
          ' se MDI
          If value.Id = OPModes.Mdi Then
             ' mostro pagina comandi MDI

EgtBEAMWALL.Supervisor/MDIPage/MDIPageVM.vb

@@ -163,7 +163,7 @@ Public Class MDIPageVM
    ''' </summary>
    Friend Sub SendMDI()
       If Not String.IsNullOrWhiteSpace(m_sMDICommand_Text) Then
-         MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.MDI, m_sMDICommand_Text))
+         MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.MDI, m_sMDICommand_Text))
       End If
    End Sub
 

EgtBEAMWALL.Supervisor/MachCommandMessagePanel/MachCommandMessagePanelVM.vb

@@ -427,11 +427,11 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub Disconnect()
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.DISCONNECT))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.DISCONNECT))
    End Sub
 
    Public Sub SetOPState(OpState As Integer)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.SETOPMODE))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.SETOPMODE))
    End Sub
 
    Public ReadOnly Property Start_Command As ICommand
@@ -442,7 +442,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub Start(ByVal param As Object)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.START))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.START))
    End Sub
 
    Public ReadOnly Property Stop_Command As ICommand
@@ -453,7 +453,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub [Stop](ByVal param As Object)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOP_))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOP_))
    End Sub
 
    Public ReadOnly Property Reset_Command As ICommand
@@ -464,7 +464,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub Reset(ByVal param As Object)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.RESET))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.RESET))
       ' annullo stato di pronto ad essere lavorato di tutti i programmi
       If Not IsNothing(Map.refProjectVM.SupervisorMachGroupPanelVM) Then Map.refProjectVM.SupervisorMachGroupPanelVM.ResetAllMachGroups()
    End Sub
@@ -477,7 +477,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub [Step](ByVal param As Object)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STEP_))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STEP_))
    End Sub
 
    Public ReadOnly Property SetPoint_Command As ICommand
@@ -488,7 +488,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub SetPoint(ByVal param As Object)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.SETPOINT))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.SETPOINT))
    End Sub
 
 
@@ -500,7 +500,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub DeleteAlarms(ByVal param As Object)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.DELETEALARMS))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.DELETEALARMS))
    End Sub
 
    Public Function GetVarPathByName(Name As String) As String

EgtBEAMWALL.Supervisor/MachManagingThread/MachManaging.vb

@@ -10,6 +10,9 @@ Imports EgtBEAMWALL.Supervisor.CommVar
 
 Public Class MachManaging
 
+   ' lock per aggiunta elemento a lista MachGroup
+   Private Shared Lock_CommandList As New Object
+
    Private m_bConnected As Boolean = False
    Public ReadOnly Property bConnected As Boolean
       Get
@@ -53,6 +56,22 @@ Public Class MachManaging
          Return m_CommandList
       End Get
    End Property
+   Friend Shared Sub AddToCommandList(value As ThreadCommand)
+      SyncLock Lock_CommandList
+         ' EgtOutLog("Inizio ciclo rimozioni")
+         For CommandIndex = m_CommandList.Count - 1 To 0 Step -1
+            Dim Command As ThreadCommand = m_CommandList(CommandIndex)
+            If Command.ProcessingStatus = ThreadCommand.ProcessingStatuses.DONE Then
+               ' EgtOutLog("Inizio rimozione comando")
+               m_CommandList.Remove(Command)
+               ' EgtOutLog("Fine rimozione comando")
+            End If
+         Next
+         ' EgtOutLog("Fine ciclo rimozioni")
+         CommandList.Add(value)
+         ' EgtOutLog("Count dopo aggiunta: " & CommandList.Count)
+      End SyncLock
+   End Sub
 
    Private m_bStartPending As Boolean = False
    Public ReadOnly Property StartPending As Boolean
@@ -638,7 +657,7 @@ Public Class MachManaging
 
                      ' se non impostata data start
                      If MachGroup.dtStartTime = DateTime.MinValue Then
-                        EgtOutLog("Start date not set on Prod " & nP_Prod & " Machgroup " & nP_Machgroup)
+                        ' EgtOutLog("Start date not set on Prod " & nP_Prod & " Machgroup " & nP_Machgroup)
                         Dim dtStart As DateTime = MachGroup.dtEndTime - TimeSpan.FromSeconds(60)
                         ' provo a recuperare tempo stimato
                         If MachGroup.nCALC_TIME > 0 Then
@@ -722,7 +741,7 @@ Public Class MachManaging
    End Function
 
    Private Function SendNextProgram() As Boolean
-      EgtOutLog("Inizio SendNextProgram")
+      ' EgtOutLog("Inizio SendNextProgram")
       Dim bSent As Boolean = False
       If (CurrentMachine.NCType = NCTypes.TPA AndAlso Not m_bStartPending AndAlso Tpa.opState = MachineOperatingState.Pending) OrElse
          (CurrentMachine.NCType = NCTypes.NUM_FLEXIUM AndAlso Not Num_Flexium.bIsTransferActive) OrElse
@@ -730,20 +749,20 @@ Public Class MachManaging
          (CurrentMachine.NCType = NCTypes.NUM_AXIUM_PCTOOLKIT AndAlso Not Num_Axium_PCToolkit.bIsTransferActive) Then ' Or Tpa.opState = MachineOperatingState.Start) Then
          ' verifico se c'e' un programma da lanciare
          If Not IsNothing(Map.refProjectVM.SupervisorMachGroupPanelVM) Then
-            EgtOutLog("Start " & DateTime.Now())
+            ' EgtOutLog("Start " & DateTime.Now())
             Dim bMachGroupNotReady As Boolean = False
             SyncLock m_Lock_SendProgram
                For Each MyMachGroup As MyMachGroupVM In Map.refProjectVM.SupervisorMachGroupPanelVM.MachGroupVMList
-                  EgtOutLog("Ciclo su name: " & MyMachGroup.Name & " id: " & MyMachGroup.Id)
+                  ' EgtOutLog("Ciclo su name: " & MyMachGroup.Name & " id: " & MyMachGroup.Id)
                   If Not MyMachGroup.bSentToMachine AndAlso (MyMachGroup.dtStartTime = DateTime.MinValue OrElse
                      (Map.refSupervisorManagerVM.CurrProd.nType = BWType.WALL AndAlso MyMachGroup.bResetWhileCutting)) Then
-                     EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " è da fare")
+                     ' EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " è da fare")
                      ' verifico se ricalcolo finito
                      If MyMachGroup.bReadyForMachining AndAlso If(CurrentMachine.NCType = NCTypes.NUM_FLEXIUM Or CurrentMachine.NCType = NCTypes.NUM_AXIUM_APSERVER OrElse CurrentMachine.NCType = NCTypes.NUM_AXIUM_PCTOOLKIT, Not MyMachGroup.bSendingToMachine, True) Then
-                        EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " pronto per essere lavorato")
+                        ' EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " pronto per essere lavorato")
                         ' lo lancio
                         bSent = SendProgram(MyMachGroup.CnFilePath(), MyMachGroup.Name)
-                        EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " mandato " & DateTime.Now() & " " & MyMachGroup.Name & " " & bSent.ToString())
+                        ' EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " mandato " & DateTime.Now() & " " & MyMachGroup.Name & " " & bSent.ToString())
                         Select Case CurrentMachine.NCType
                            Case NCTypes.TPA
                               MyMachGroup.SetSentToMachine(bSent)
@@ -755,7 +774,7 @@ Public Class MachManaging
                      Else
                         ' programma non ancora pronto, esco per attendere
                         bMachGroupNotReady = True
-                        EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " non ancora pronto per essere mandato")
+                        ' EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " non ancora pronto per essere mandato")
                         Exit For
                         'Return False
                      End If
@@ -763,7 +782,7 @@ Public Class MachManaging
                Next
             End SyncLock
             If bMachGroupNotReady Then Return False
-            EgtOutLog("End " & DateTime.Now())
+            ' EgtOutLog("End " & DateTime.Now())
          End If
       End If
       Return bSent
@@ -771,10 +790,17 @@ Public Class MachManaging
 
    Private Sub CommandList_CollectionChanged(sender As Object, e As NotifyCollectionChangedEventArgs)
       If Not IsNothing(e.NewItems) Then
-         For Each Command In e.NewItems
-            ExecuteCommand(DirectCast(Command, ThreadCommand))
-            m_CommandList.Remove(Command)
+         ' EgtOutLog("Inizio ciclo esecuzione comandi")
+         Dim nCommandCount As Integer = e.NewItems.Count
+         For CommandIndex = 0 To nCommandCount - 1
+            Dim Command As ThreadCommand = e.NewItems(CommandIndex)
+            If Command.ProcessingStatus = ThreadCommand.ProcessingStatuses.WAITING Then
+               Command.SetProcessingStatus(ThreadCommand.ProcessingStatuses.PROCESSING)
+               ExecuteCommand(DirectCast(Command, ThreadCommand))
+               Command.SetProcessingStatus(ThreadCommand.ProcessingStatuses.DONE)
+            End If
          Next
+         ' EgtOutLog("Fine ciclo esecuzione di " & nCommandCount & " comandi")
       End If
    End Sub
 
@@ -1044,7 +1070,7 @@ Public Class MachManaging
             Num_Axium_APServer.StartTransfer()
             Return True
          Case NCTypes.NUM_AXIUM_PCTOOLKIT
-            EgtOutLog("Pre Download")
+            ' EgtOutLog("Pre Download")
             Dim nFileType As Integer = 0
             If Integer.TryParse(ProgramId, nFileType) AndAlso nFileType > 0 Then
                Num_Axium_PCToolkit.FileDownload(nFileType * 10, ProgramPath)

EgtBEAMWALL.Supervisor/MachManagingThread/MachManagingThread.vb

@@ -54,6 +54,12 @@ End Class
 
 Public Class ThreadCommand
 
+   Public Enum ProcessingStatuses
+      WAITING = 1
+      PROCESSING = 2
+      DONE = 3
+   End Enum
+
    Private m_CommandType As CommandTypes
    Public ReadOnly Property CommandType As CommandTypes
       Get
@@ -95,6 +101,16 @@ Public Class ThreadCommand
       End Get
    End Property
 
+   Private m_ProcessingStatus As ProcessingStatuses = ProcessingStatuses.WAITING
+   Public ReadOnly Property ProcessingStatus As ProcessingStatuses
+      Get
+         Return m_ProcessingStatus
+      End Get
+   End Property
+   Friend Sub SetProcessingStatus(value As ProcessingStatuses)
+      m_ProcessingStatus = value
+   End Sub
+
    Protected Sub New()
    End Sub
 

EgtBEAMWALL.Supervisor/MainMenu/MainMenuVM.vb

@@ -277,31 +277,31 @@ Public Class MainMenuVM
 
    Private Function InitINPUTS() As Boolean
       ' fermo e riavvio lettura variabili per includere quelle della pagina input
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
       Map.refMainWindowVM.NotifyPropertyChanged(NameOf(Map.refMainWindowVM.nSelTabPage))
       Return True
    End Function
 
    Private Function ExitINPUTS() As Boolean
       ' fermo e riavvio lettura variabili per includere quelle della pagina input
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
       Return True
    End Function
 
    Private Function InitOUTPUTS() As Boolean
       ' fermo e riavvio lettura variabili per includere quelle della pagina input
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
       Map.refMainWindowVM.NotifyPropertyChanged(NameOf(Map.refMainWindowVM.nSelTabPage))
       Return True
    End Function
 
    Private Function ExitOUTPUTS() As Boolean
       ' fermo e riavvio lettura variabili per includere quelle della pagina input
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
       Return True
    End Function
 

EgtBEAMWALL.Supervisor/MainWindow/MainWindowVM.vb

@@ -234,7 +234,7 @@ Public Class MainWindowVM
          Return
       End If
       ' disconnetto comunicazione con macchina
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.DISCONNECT))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.DISCONNECT))
       ' termino thread di comunicazione con Db ed altri programmi
       ViewerOptimizerCommThread.StopThread()
       ' Verifico modifica parametri in Configurazione e chiedo il salvataggio

EgtBEAMWALL.Supervisor/VariablesList/VariablesListVM.vb

@@ -64,7 +64,7 @@ Public Class Variable
          Return CommVar.sValue
       End Get
       Set(value As String)
-         MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.WRITE, {CommVar.nType}, Nothing, {CommVar.sAddress, value}))
+         MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.WRITE, {CommVar.nType}, Nothing, {CommVar.sAddress, value}))
          NotifyPropertyChanged(NameOf(sValue))
       End Set
    End Property