EgtBEAMWALL :

- aggiunto nuovo calcolo solidi per assemblaggio, verificato e commentato.

EgtBEAMWALL.Core/BTLModel/BTLFeatureM.vb

@@ -1,4 +1,5 @@
 Imports System.Collections.ObjectModel
+Imports System.Globalization
 Imports System.Windows
 Imports System.Windows.Input
 Imports System.Windows.Media
@@ -131,6 +132,16 @@ Public Class BTLFeatureM
       End Set
    End Property
 
+   Protected m_VARIANTList As New ObservableCollection(Of Integer)()
+   Public Property VARIANTList As ObservableCollection(Of Integer)
+      Get
+         Return m_VARIANTList
+      End Get
+      Set(value As ObservableCollection(Of Integer))
+         m_VARIANTList = value
+      End Set
+   End Property
+
    Protected m_sDES As String = String.Empty
    Public Property sDES As String
       Get
@@ -141,6 +152,16 @@ Public Class BTLFeatureM
       End Set
    End Property
 
+   Public Overridable Property nSelVARIANT As Integer
+      Get
+         Dim nDes As Integer = 0
+         Return If(Integer.TryParse(m_sDES, nDes), nDes, 0)
+      End Get
+      Set(value As Integer)
+         m_sDES = value.ToString()
+      End Set
+   End Property
+
    Protected m_frFRAME As New Frame3d
    Public Property frFRAME As Frame3d
       Get
@@ -244,6 +265,7 @@ Public Class BTLFeatureM
 #Region "CONSTRUCTOR"
 
    Protected Sub New()
+      CreateVariantList()
    End Sub
 
    Public Shared Function CreateNewBTLFeature() As BTLFeatureM
@@ -258,7 +280,7 @@ Public Class BTLFeatureM
       EgtGetInfo(nFeatureId, BTL_FTR_GRP, NewBTLFeature.m_nSelGRP)
       EgtGetInfo(nFeatureId, BTL_FTR_PRC, NewBTLFeature.m_nPRC)
       EgtGetInfo(nFeatureId, BTL_FTR_SIDE, NewBTLFeature.m_nSelSIDE)
-      EgtGetInfo(nFeatureId, BTL_FTR_PRIORITY, NewBTLFeature.m_nPRIORITY)
+      EgtGetInfo(nFeatureId, BTL_FTR_PRIORITY, NewBTLFeature.m_nPriority)
       Dim nDO As Integer = 1
       If EgtGetInfo(nFeatureId, BTL_FTR_DO, nDO) Then
          NewBTLFeature.m_bDO = (nDO <> 0)
@@ -322,11 +344,22 @@ Public Class BTLFeatureM
       NewBTLFeature.m_nSelSIDE = nSIDE
       NewBTLFeature.m_nPriority = 0
       NewBTLFeature.m_bDO = True
+      NewBTLFeature.nSelVARIANT = 0
       ' crea parametri per questa feature da file ini
       NewBTLFeature.CreateFeatureParams(NewBTLFeature)
       Return NewBTLFeature
    End Function
 
+   Private Sub CreateVariantList()
+      Dim sMaxIndex As String = ""
+      Dim nMaxIndex As Integer = 0
+      EgtUILib.GetPrivateProfileString([VARIANT], K_MAXINDEX, "", sMaxIndex, m_sBTLIniFile)
+      Integer.TryParse(sMaxIndex, nMaxIndex)
+      For Index As Integer = 0 To nMaxIndex
+         m_VARIANTList.Add(Index)
+      Next
+   End Sub
+
 #End Region    ' CONSTRUCTOR
 
 #Region "METHODS"
@@ -362,15 +395,21 @@ Public Class BTLFeatureM
       Dim TempList As New List(Of BTLParamM)
       Dim NewBTLParam As BTLParamM = Nothing
       ' leggo tutti i P della feature
-      While BTLIniFile.GetBeamPrivateProfileParam(m_nSelGRP, m_nPRC, True, ParamIndex, Me, NewBTLParam)
+      While BTLIniFile.GetBeamPrivateProfileParam(m_nSelGRP, m_nPRC, nSelVARIANT, True, ParamIndex, Me, NewBTLParam)
          TempList.Add(NewBTLParam)
          ParamIndex += 1
       End While
+      If TempList.Count <= 0 Then
+         While BTLIniFile.GetBeamPrivateProfileParam(m_nSelGRP, m_nPRC, 0, True, ParamIndex, Me, NewBTLParam)
+            TempList.Add(NewBTLParam)
+            ParamIndex += 1
+         End While
+      End If
       NewBTLFeature.PBTLParamMList = TempList
       ' leggo tutti i Q della feature
       ParamIndex = 1
       TempList = New List(Of BTLParamM)
-      While BTLIniFile.GetBeamPrivateProfileParam(m_nSelGRP, m_nPRC, False, ParamIndex, Me, NewBTLParam)
+      While BTLIniFile.GetBeamPrivateProfileParam(m_nSelGRP, m_nPRC, nSelVARIANT, False, ParamIndex, Me, NewBTLParam)
          TempList.Add(NewBTLParam)
          ParamIndex += 1
       End While
@@ -545,7 +584,7 @@ Public Class BTLFeatureM
          For Each QPar In QBTLParamMList
             If QPar.bCustom Then EgtSetInfo(nFeatureId, QPar.sName & "A", 1)
          Next
-         EgtSetInfo( nFeatureId, BTL_FTR_PRIORITY, nPriority)
+         EgtSetInfo(nFeatureId, BTL_FTR_PRIORITY, nPriority)
          SetFeatureId(nFeatureId)
          ' imposto modificato per copie
          EgtDuploSetModified(ParentPart.nPartId)
@@ -598,6 +637,11 @@ Public Class BTLFeatureM
       Return True
    End Function
 
+   ' funzione che restituisce se la feature è un Variant
+   Public Function IsVariant() As Boolean
+      Return m_nPRC = 900
+   End Function
+
 #End Region    ' METHODS
 
 End Class

EgtBEAMWALL.Core/BTLViewModel/BTLFeatureVM.vb

@@ -64,6 +64,15 @@ Public Class BTLFeatureVM
       End Set
    End Property
 
+   Public Overridable Property nSelVARIANT As Integer
+      Get
+         Return m_BTLFeatureM.nSelVARIANT
+      End Get
+      Set(value As Integer)
+         m_BTLFeatureM.nSelVARIANT = value
+      End Set
+   End Property
+
    Public ReadOnly Property sName As String
       Get
          Return m_BTLFeatureM.sName

EgtBEAMWALL.Core/CALCPanel/CalcIntegration.vb

@@ -593,4 +593,13 @@ Public Class ProcessResult
       m_nTIME = TIME
    End Sub
 
+   Public Sub ResetTypeFeature()
+      m_Type = ProcessResultTypes.PART
+      m_nTASKID = 0
+   End Sub
+   Public Sub ResetTypePart()
+      m_Type = ProcessResultTypes.BAR
+      m_nCUTID = 0
+   End Sub
+
 End Class

EgtBEAMWALL.Core/Constants/ConstBeam.vb

@@ -201,12 +201,14 @@
    Public Const BTL_GEN_USERATTRIBUTE = "USERATTRIBUTE"
 
    Public Const PROCESSINGS As String = "Processings"
+   Public Const [VARIANT] As String = "Variant"
    Public Const OUTLINE As String = "Outline"
    Public Const BTL_FTR_GRP As String = "GRP"
    Public Const BTL_FTR_PRC As String = "PRC"
    Public Const BTL_FTR_DO As String = "DO"
    Public Const BTL_FTR_SIDE As String = "SIDE"
    Public Const BTL_FTR_PRIORITY As String = "PRIORITY"
+   Public Const BTL_FTR_VARIANT As String = "VARIANT"
    Public Const BTL_FTR_NAME As String = "NAME"
    Public Const BTL_FTR_DES As String = "DES"
    Public Const BTL_FTR_PRID As String = "PRID"
@@ -295,6 +297,8 @@
    Public Const WRH_L As String = "L"
    Public Const WRH_KERF As String = "Kerf"
    Public Const WRH_S As String = "S"
+   Public Const WRH_NESTINGTYPE As String = "NestingType"
+   Public Const WRH_PANELSAW As String = "PanelSaw"
 
    ' parametri import/export
    Public Const EXP_PROJ As String = "EXPORTPROJ"

EgtBEAMWALL.Core/Constants/ConstGen.vb

@@ -14,9 +14,9 @@
 Public Module ConstGen
 
    ' File con direttorio radice dei dati
-   Public Const DAT_FILE_NAME As String = "DataRoot.Ini"
-   Public Const S_DATA As String = "Data"
-   Public Const K_DATAROOT As String = "DataRoot"
+   'Public Const DAT_FILE_NAME As String = "DataRoot.Ini"
+   'Public Const S_DATA As String = "Data"
+   'Public Const K_DATAROOT As String = "DataRoot"
 
    ' File con dati di licenza
    Public Const LIC_FILE_NAME As String = "EgtBEAMWALL.lic"
@@ -24,6 +24,7 @@ Public Module ConstGen
    Public Const K_LOCKID As String = "LockId"
    Public Const K_KEY As String = "Key"
    Public Const K_NESTKEY As String = "NestKey"
+   Public Const K_MAXINDEX As String = "MaxIndex"
 
    ' Pagine del programma
    Public Enum Pages As Integer
@@ -50,7 +51,7 @@ Public Module ConstGen
    Public Const SUPGENLOG_FILE_NAME As String = "EgtBEAMWALL.SupervisorLog#.txt"
 
    ' Sottodirettorio di configurazione
-   Public Const CONF_DIR As String = "Config"
+   'Public Const CONF_DIR As String = "Config"
    ' Sottodirettorio delle risorse
    Public Const RES_DIR As String = "Resources"
    ' Sottodirettorio temporaneo
@@ -70,7 +71,7 @@ Public Module ConstGen
    ' Sottodirettorio di default per il salvataggio con nome
    Public Const SAVE_DFL_NAMEDIR As String = "MyProjects"
    ' Sottodirettorio di default per le macchine
-   Public Const MACHINES_DFL_DIR As String = "Machines"
+   'Public Const MACHINES_DFL_DIR As String = "Machines"
    ' Sottodirettorio di default per toolmakers
    Public Const TOOLMAKERS_DFL_DIR As String = "ToolMakers"
    ' Nome file Lua con le funzioni di attrezzaggio

EgtBEAMWALL.Core/Constants/ConstIni.vb

@@ -98,6 +98,7 @@ Public Module ConstIni
    Public Const K_BTLFLAG As String = "BtlFlag"
    Public Const K_WALLBTLFLAG As String = "WallBtlFlag"
    Public Const K_WALLOPPOSITESIDENESTING As String = "WallOppositeSideNesting"
+   Public Const K_BTLAUXDIR As String = "BtlAuxDir"
 
    'Public Const S_MACH As String = "Mach"
    'Public Const K_MACHINESDIR As String = "MachinesDir"

EgtBEAMWALL.Core/Constants/ConstMachIni.vb

@@ -7,6 +7,9 @@
 
    Public Const K_NCTYPE As String = "NCType"
    Public Const K_CONNECTIONSTRING As String = "ConnectionString"
+   Public Const K_SUPERVISOR As String = "Supervisor"
+   Public Const K_SAVECNCPATH As String = "SaveCncPath"
+   Public Const K_SAVEEXT As String = "SaveExt"
 
    Public Const S_CHANNELS As String = "Channels"
 

EgtBEAMWALL.Core/MachGroupModel/MyMachGroupPanelM.vb

@@ -186,7 +186,13 @@ Public Class MyMachGroupPanelM
                While nOutlineId <> GDB_ID.NULL
                   ' verifico che sia feature
                   If EgtExistsInfo(nOutlineId, MGR_FTR_PRC) Then
-                     If EgtExistsInfo(nOutlineId, MGR_FTR_PRID) Then
+                     Dim nCurrPrId As Integer = GDB_ID.NULL
+                     If EgtGetInfo(nOutlineId, MGR_FTR_PRID, nCurrPrId) AndAlso nCurrPrId <> GDB_ID.NULL Then
+                        If nCurrPrId < nPRId Then
+                           EgtSetInfo(nOutlineId, MGR_FTR_PRID, nPRId)
+                           nPRId += 1
+                        End If
+                        nPRId = Math.Max(nPRId - 1, nCurrPrId) + 1
                         nOutlineId = EgtGetNext(nOutlineId)
                         Continue While
                      Else
@@ -225,7 +231,14 @@ Public Class MyMachGroupPanelM
                         Dim nPRC As Integer
                         If EgtGetInfo(nOutlineId, MGR_FTR_PRC, nPRC) Then
                            nPRId = 0
-                           If Not EgtGetInfo(nOutlineId, MGR_FTR_PRID, nPRId) Then
+                           If EgtGetInfo(nOutlineId, MGR_FTR_PRID, nPRId) Then
+                              If nPRId < nGlobPRId Then
+                                 EgtSetInfo(nOutlineId, MGR_FTR_PRID, nGlobPRId)
+                                 nPRId = nGlobPRId
+                                 nGlobPRId += 1
+                              End If
+                              nGlobPRId = Math.Max(nGlobPRId - 1, nPRId) + 1
+                           Else
                               EgtSetInfo(nOutlineId, MGR_FTR_PRID, nGlobPRId)
                               nPRId = nGlobPRId
                               nGlobPRId += 1

EgtBEAMWALL.Core/MachGroupPanel/PartVM.vb

@@ -571,7 +571,13 @@ Public MustInherit Class PartVM
    Public Sub CalcGlobalUpdate()
       m_PartM.nCALC_GlobalState = nCALC_State
       For Each Feature In FeatureVMList
-         If Not Feature.bDO Then Continue For
+         If Not Feature.bDO Then
+            If Feature.nState = CalcStates.COLLISION AndAlso Feature.nState > m_PartM.nCALC_GlobalState Then
+               m_PartM.nCALC_GlobalState = Feature.nState
+               m_PartM.nCALC_GlobalERR = Feature.nCALC_ERR
+            End If
+            Continue For
+         End If
          If Feature.nState > m_PartM.nCALC_GlobalState Then
             m_PartM.nCALC_GlobalState = Feature.nState
             m_PartM.nCALC_GlobalERR = Feature.nCALC_ERR

EgtBEAMWALL.Core/My Project/AssemblyInfo.vb

@@ -16,7 +16,7 @@ Imports System.Runtime.InteropServices
 <Assembly: AssemblyDescription("")>
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("EgtBEAMWALL.Core")>
-<Assembly: AssemblyCopyright("Copyright ©  2020-2023 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2020-2025 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 
 <Assembly: ComVisible(False)>
@@ -35,5 +35,5 @@ Imports System.Runtime.InteropServices
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.12.2")>
-<Assembly: AssemblyFileVersion("2.5.12.2")>
+<Assembly: AssemblyVersion("2.7.4.1")>
+<Assembly: AssemblyFileVersion("2.7.4.1")>

EgtBEAMWALL.Core/Utility/BTLIniFile.vb

@@ -126,7 +126,7 @@ Public Module BTLIniFile
    End Function
 
    ' funzione che ottiene il parametro P/Q usando m_nBTLBWType del modulo
-   Public Function GetBeamPrivateProfileParam(IpGRP As Integer, IpPRC As Integer, IsP As Boolean, IpFeatureParamIndex As String, IpParentFeature As BTLFeatureM, ByRef IpBTLParam As BTLParamM) As Boolean
+   Public Function GetBeamPrivateProfileParam(IpGRP As Integer, IpPRC As Integer, IpVariant As Integer, IsP As Boolean, IpFeatureParamIndex As String, IpParentFeature As BTLFeatureM, ByRef IpBTLParam As BTLParamM) As Boolean
       Dim sBTLParam As String = String.Empty
       Dim sBWQParam As String = String.Empty
       If m_nBTLBWType = BWType.BEAM Then
@@ -134,7 +134,7 @@ Public Module BTLIniFile
       ElseIf m_nBTLBWType = BWType.WALL Then
          sBWQParam = "W"
       End If
-      If EgtUILib.GetPrivateProfileString(CalcBeamPrivateProfileGRP(IpGRP) & "." & IpPRC, If(IsP, "P", "Q" & sBWQParam) & IpFeatureParamIndex, String.Empty, sBTLParam, m_sBTLIniFile) > 0 Then
+      If EgtUILib.GetPrivateProfileString(CalcBeamPrivateProfileGRP(IpGRP) & "." & If(IpPRC = 900 AndAlso IpVariant > 0, IpPRC & "." & IpVariant, IpPRC), If(IsP, "P", "Q" & sBWQParam) & IpFeatureParamIndex, String.Empty, sBTLParam, m_sBTLIniFile) > 0 Then
          Dim sBTLParamParams() As String = sBTLParam.Split(","c)
          ' verifico numero minimo di parametri
          If sBTLParamParams.Count >= 6 Then

EgtBEAMWALL.DataLayer/Properties/AssemblyInfo.cs

@@ -10,7 +10,7 @@ using System.Runtime.InteropServices;
 [assembly: AssemblyConfiguration("")]
 [assembly: AssemblyCompany("Egalware s.r.l.")]
 [assembly: AssemblyProduct("EgtBEAMWALL.DataLayer")]
-[assembly: AssemblyCopyright("Copyright ©  2020-2023 by Egalware s.r.l.")]
+[assembly: AssemblyCopyright("Copyright ©  2020-2025 by Egalware s.r.l.")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]
 
@@ -32,5 +32,5 @@ using System.Runtime.InteropServices;
 // You can specify all the values or you can default the Build and Revision Numbers
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("2.5.12.2")]
-[assembly: AssemblyFileVersion("2.5.12.2")]
+[assembly: AssemblyVersion("2.7.4.1")]
+[assembly: AssemblyFileVersion("2.7.4.1")]

EgtBEAMWALL.Supervisor/EgtBEAMWALL.Supervisor.vbproj

@@ -16,31 +16,6 @@
     <NuGetPackageImportStamp>
     </NuGetPackageImportStamp>
   </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
-    <PlatformTarget>AnyCPU</PlatformTarget>
-    <DebugSymbols>true</DebugSymbols>
-    <DebugType>full</DebugType>
-    <DefineDebug>true</DefineDebug>
-    <DefineTrace>true</DefineTrace>
-    <IncrementalBuild>true</IncrementalBuild>
-    <OutputPath>bin\Debug\</OutputPath>
-    <DocumentationFile>EgtBEAMWALL.Supervisor.xml</DocumentationFile>
-    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
-    <Prefer32Bit>false</Prefer32Bit>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
-    <PlatformTarget>AnyCPU</PlatformTarget>
-    <DebugType>pdbonly</DebugType>
-    <DebugSymbols>false</DebugSymbols>
-    <DefineDebug>false</DefineDebug>
-    <DefineTrace>true</DefineTrace>
-    <IncrementalBuild>false</IncrementalBuild>
-    <Optimize>true</Optimize>
-    <OutputPath>bin\Release\</OutputPath>
-    <DocumentationFile>EgtBEAMWALL.Supervisor.xml</DocumentationFile>
-    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
-    <Prefer32Bit>false</Prefer32Bit>
-  </PropertyGroup>
   <PropertyGroup>
     <OptionExplicit>On</OptionExplicit>
   </PropertyGroup>
@@ -53,29 +28,6 @@
   <PropertyGroup>
     <OptionInfer>On</OptionInfer>
   </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x64'">
-    <DebugSymbols>true</DebugSymbols>
-    <DefineDebug>true</DefineDebug>
-    <DefineTrace>true</DefineTrace>
-    <OutputPath>bin\x64\Debug\</OutputPath>
-    <DocumentationFile>EgtBEAMWALL.Supervisor.xml</DocumentationFile>
-    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
-    <DebugType>full</DebugType>
-    <PlatformTarget>x64</PlatformTarget>
-    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
-    <Prefer32Bit>false</Prefer32Bit>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Release|x64'">
-    <DefineTrace>true</DefineTrace>
-    <OutputPath>bin\x64\Release\</OutputPath>
-    <DocumentationFile>EgtBEAMWALL.Supervisor.xml</DocumentationFile>
-    <Optimize>true</Optimize>
-    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
-    <DebugType>pdbonly</DebugType>
-    <PlatformTarget>x64</PlatformTarget>
-    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
-    <Prefer32Bit>false</Prefer32Bit>
-  </PropertyGroup>
   <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x86'">
     <DebugSymbols>true</DebugSymbols>
     <DefineDebug>true</DefineDebug>
@@ -102,27 +54,6 @@
   <PropertyGroup>
     <ApplicationManifest>app.manifest</ApplicationManifest>
   </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'RemoteDebug|AnyCPU'">
-    <DebugSymbols>true</DebugSymbols>
-    <DefineDebug>true</DefineDebug>
-    <DefineTrace>true</DefineTrace>
-    <OutputPath>bin\RemoteDebug\</OutputPath>
-    <DocumentationFile>EgtBEAMWALL.Supervisor.xml</DocumentationFile>
-    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
-    <DebugType>full</DebugType>
-    <PlatformTarget>AnyCPU</PlatformTarget>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'RemoteDebug|x64'">
-    <DebugSymbols>true</DebugSymbols>
-    <DefineDebug>true</DefineDebug>
-    <DefineTrace>true</DefineTrace>
-    <OutputPath>bin\x64\RemoteDebug\</OutputPath>
-    <DocumentationFile>EgtBEAMWALL.Supervisor.xml</DocumentationFile>
-    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
-    <DebugType>full</DebugType>
-    <PlatformTarget>x64</PlatformTarget>
-    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
-  </PropertyGroup>
   <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'RemoteDebug|x86'">
     <DebugSymbols>true</DebugSymbols>
     <DefineDebug>true</DefineDebug>

EgtBEAMWALL.Supervisor/MainWindow/MainWindowM.vb

@@ -248,8 +248,8 @@ Public Class MainWindowM
          EgtSetLockId( sLockId)
       End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2512, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5327, 2512, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2704, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(5327, 2704, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & SUPGENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

EgtBEAMWALL.Supervisor/My Project/AssemblyInfo.vb

@@ -30,7 +30,7 @@ Imports System.Windows
 #End if
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("EgtBEAMWALL.Supervisor")>
-<Assembly: AssemblyCopyright("Copyright ©  2020-2023 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2020-2025 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(false)>
 
@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.12.2")>
-<Assembly: AssemblyFileVersion("2.5.12.2")>
+<Assembly: AssemblyVersion("2.7.10.1")>
+<Assembly: AssemblyFileVersion("2.7.10.1")>

EgtBEAMWALL.Supervisor/SceneHost/MySceneHostVM.vb

@@ -58,6 +58,12 @@ Public Class MySceneHostVM
          Dim hMainWnd As IntPtr = New WindowInteropHelper(Application.Current.MainWindow).Handle
          EgtSetMainWindowHandle(hMainWnd)
          EgtSetCurrentContext(MainScene.GetCtx())
+         ' Imposto direttorio ausiliario per import/gestione BTL
+         Dim sBtlAuxDir As String = String.Empty
+         GetMainPrivateProfileString(S_IMPORT, K_BTLAUXDIR, "", sBtlAuxDir)
+         If Not EgtSetBtlAuxDir(sBtlAuxDir) Then
+            EgtOutLog("Missing BtlAuxDir path! Will be impossible to load Variant!")
+         End If
          ' inizializzo gestore travi e pareti
          EgtInitBeamMgr(EIB_FL.TS3_POS + EIB_FL.USEUATTR)
          ' inizializzo gestore lavorazioni

EgtBEAMWALL.ViewerOptimizer/AddFeatureWnd/AddFeatureWndVM.vb

@@ -221,6 +221,13 @@ Public Class PRC
       End Get
    End Property
 
+   Private m_nVARIANT As Integer = 0
+   Public ReadOnly Property nVARIANT As Integer
+      Get
+         Return m_nVARIANT
+      End Get
+   End Property
+
    ' Nome
    Private m_sName As String
    Public ReadOnly Property sName As String

EgtBEAMWALL.ViewerOptimizer/BTLViewModel/BTLFeatureVM.vb

@@ -1,9 +1,14 @@
 Imports System.Collections.ObjectModel
 Imports System.Collections.Specialized
 Imports System.ComponentModel
+Imports System.Globalization
+Imports System.IO
+Imports System.Text.RegularExpressions
+Imports System.Windows.Interop
 Imports EgtBEAMWALL.Core
 Imports EgtUILib
 Imports EgtWPFLib5
+Imports Mysqlx.XDevAPI.Common
 
 Public Class BTLFeatureVM
    Inherits Core.BTLFeatureVM
@@ -78,14 +83,14 @@ Public Class BTLFeatureVM
                If EgtGetInfo(nFeatureId, "AUXID", sAuxId) Then
                   ' verifico se ha uno o due percorsi
                   Dim sAuxIdSplit() As String = sAuxId.Split(","c)
-                  If Not IsNothing( sAuxIdSplit) AndAlso sAuxIdSplit.Length() >= 1 Then
+                  If Not IsNothing(sAuxIdSplit) AndAlso sAuxIdSplit.Length() >= 1 Then
                      Dim nAuxId As Integer = GDB_ID.NULL
                      If Integer.TryParse(sAuxIdSplit(0), nAuxId) Then
                         EgtTransform(nFeatureId + nAuxId, frOld, GDB_RT.GLOB)
                         EgtTransform(nFeatureId + nAuxId, frNew, GDB_RT.GLOB)
                      End If
                   End If
-                  If Not IsNothing( sAuxIdSplit) AndAlso sAuxIdSplit.Length() >= 2 Then
+                  If Not IsNothing(sAuxIdSplit) AndAlso sAuxIdSplit.Length() >= 2 Then
                      Dim nAux2Id As Integer = GDB_ID.NULL
                      If Integer.TryParse(sAuxIdSplit(1), nAux2Id) Then
                         EgtTransform(nFeatureId + nAux2Id, frOld, GDB_RT.GLOB)
@@ -114,6 +119,67 @@ Public Class BTLFeatureVM
       End Set
    End Property
 
+   Public Property VARIANTList As ObservableCollection(Of Integer)
+      Get
+         Return m_BTLFeatureM.VARIANTList
+      End Get
+      Set(value As ObservableCollection(Of Integer))
+         m_BTLFeatureM.VARIANTList = value
+      End Set
+   End Property
+
+   Public Overrides Property nSelVARIANT As Integer
+      Get
+         Return m_BTLFeatureM.nSelVARIANT
+      End Get
+      Set(value As Integer)
+         If value <> m_BTLFeatureM.nSelVARIANT Then
+            m_BTLFeatureM.nSelVARIANT = value
+            Dim vPar As Double() = Nothing
+            Dim sPar As String = Nothing
+            Dim vParQ As String() = Nothing
+            CreateFeatureVariant(value, vPar, sPar, vParQ)
+            If IsNothing(vPar) Then
+               m_BTLFeatureM.nSelVARIANT = 0
+               CreateFeatureVariant(value, vPar, sPar, vParQ)
+            End If
+            m_BTLFeatureM.nSelVARIANT = value
+            Dim bOK As Boolean = m_BTLFeatureM.UpdateParams(nSelGRP, m_BTLFeatureM.nPRC, nSelSIDE, sDES, m_BTLFeatureM.nPRID,
+                                                            m_BTLFeatureM.frFRAME, vPar, sPar, vParQ)
+            If bOK Then
+               EgtDuploSetModified(m_BTLPartM.nPartId)
+               ' seleziono feature in disegno
+               SelGeomFeature()
+               ' rendo non calcolata questa feature
+               ResetCalcFeature()
+            End If
+            NotifyPropertyChanged(NameOf(nSelVARIANT))
+            NotifyPropertyChanged(NameOf(PBTLParamVMList))
+            NotifyPropertyChanged(NameOf(QBTLParamVMList))
+            EgtDraw()
+         End If
+      End Set
+   End Property
+
+   Private Sub CreateFeatureVariant(value As Integer, ByRef vPar() As Double, ByRef sPar As String, ByRef vParQ() As String)
+      ' crea parametri per questa feature da file ini
+      m_BTLFeatureM.CreateFeatureParams(m_BTLFeatureM)
+      m_BTLFeatureM.SetDefaultValues()
+      CreatePBTLParamVMList()
+      CreateQBTLParamVMList()
+      ' aggiorno la feature con nuovo valore
+      vPar = Nothing
+      sPar = Nothing
+      vParQ = Nothing
+      m_BTLFeatureM.CalcParamArray(vPar, sPar, vParQ)
+      ' imposto path disegno da mostrare in BottomPanel
+      If value > 0 AndAlso File.Exists(Map.refMainWindowVM.MainWindowM.sResourcesRoot & "\Features\" & sDescGRP & "." & sDES & ".png") Then
+         Map.refBottomPanelVM.SetCurrDraw(Map.refMainWindowVM.MainWindowM.sResourcesRoot & "\Features\" & sDescGRP & "." & sDES & ".png")
+      Else
+         Map.refBottomPanelVM.SetCurrDraw(Map.refMainWindowVM.MainWindowM.sResourcesRoot & "\Features\" & sDescGRP & ".png")
+      End If
+   End Sub
+
    Public Property sPriority As String
       Get
          Return m_BTLFeatureM.nPriority.ToString()
@@ -186,7 +252,11 @@ Public Class BTLFeatureVM
 
    Public ReadOnly Property sDrawPath As String
       Get
-         Return Map.refMainWindowVM.MainWindowM.sResourcesRoot & "\Features\" & sDescGRP & ".png"
+         If nPRC = 900 AndAlso nSelVARIANT > 0 Then
+            Return Map.refMainWindowVM.MainWindowM.sResourcesRoot & "\Features\" & sDescGRP & "." & sDES & ".png"
+         Else
+            Return Map.refMainWindowVM.MainWindowM.sResourcesRoot & "\Features\" & sDescGRP & ".png"
+         End If
       End Get
    End Property
 
@@ -327,7 +397,7 @@ Public Class BTLFeatureVM
       AddHandler m_QBTLParamVMList.CollectionChanged, AddressOf OnQBTLParamVMListChanged
    End Sub
 
-   ' funzione che aggiorna lo stato e gli errori dopo calcolo
+   ' funzione che aggiorna lo stato, la rotazione e gli errori dopo calcolo
    Friend Sub CalcFeatureUpdate(ERR As Integer, ROT As Integer, MSG As String)
       EgtSetInfo(nFeatureId, If(Map.refMainMenuVM.SelPage = Pages.VIEW, ITG_PROJ_ERR, ITG_PROD_ERR), ERR, True)
       EgtSetInfo(nFeatureId, If(Map.refMainMenuVM.SelPage = Pages.VIEW, ITG_PROJ_MSG, ITG_PROD_MSG), MSG, True)
@@ -354,6 +424,32 @@ Public Class BTLFeatureVM
       NotifyPropertyChanged(NameOf(CALC_ERR_Foreground))
    End Sub
 
+   ' funzione che resetta gli errori del calcolo
+   Friend Sub ResetFeatureError()
+      Dim ERR As Integer = 0
+      Dim MSG As String = ""
+      EgtSetInfo(nFeatureId, If(Map.refMainMenuVM.SelPage = Pages.VIEW, ITG_PROJ_ERR, ITG_PROD_ERR), ERR, True)
+      EgtSetInfo(nFeatureId, If(Map.refMainMenuVM.SelPage = Pages.VIEW, ITG_PROJ_MSG, ITG_PROD_MSG), MSG, True)
+      m_BTLFeatureM.nCALC_ERR = ERR
+      m_BTLFeatureM.sCALC_MSG = MSG
+      Select Case ERR
+         Case 0
+            m_BTLFeatureM.nState = CalcStates.OK
+         Case 22
+            m_BTLFeatureM.nState = CalcStates.COLLISION
+         Case 17, 19
+            m_BTLFeatureM.nState = CalcStates.WARNING
+         Case < 0
+            m_BTLFeatureM.nState = CalcStates.INFO
+         Case > 0
+            m_BTLFeatureM.nState = CalcStates.ERROR_
+      End Select
+      NotifyPropertyChanged(NameOf(Calc_Background))
+      NotifyPropertyChanged(NameOf(sCALC_MSG))
+      NotifyPropertyChanged(NameOf(CALC_ERR_Letter))
+      NotifyPropertyChanged(NameOf(CALC_ERR_Foreground))
+   End Sub
+
    Friend Sub ResetCalcFeature()
       EgtRemoveInfo(nFeatureId, If(IsNothing(m_BTLPartM), ITG_PROD_ERR, ITG_PROJ_ERR))
       EgtRemoveInfo(nFeatureId, If(IsNothing(m_BTLPartM), ITG_PROD_MSG, ITG_PROJ_MSG))

EgtBEAMWALL.ViewerOptimizer/BTLViewModel/BTLParamVM.vb

@@ -213,11 +213,9 @@ Public Class BTLParamVM
          Dim bFound As Boolean = False
          If Not value Then
             ' Cerco il parametro Q direttamente nel file ini
-            Dim GRPType As Integer = Me.m_BTLFeatureM.nSelGRP
-            Dim PRC As Integer = Me.m_BTLFeatureM.nPRC
             Dim ParamIndex As String = 1
             Dim NewBTLParam As BTLParamM = Nothing
-            While BTLIniFile.GetBeamPrivateProfileParam(GRPType, PRC, False, ParamIndex, Nothing, NewBTLParam)
+            While BTLIniFile.GetBeamPrivateProfileParam(Me.m_BTLFeatureM.nSelGRP, Me.m_BTLFeatureM.nPRC, Me.m_BTLFeatureM.nSelVARIANT, False, ParamIndex, Nothing, NewBTLParam)
                Dim QBTLParam As BTLParamVM = New BTLParamVM(NewBTLParam)
                If QBTLParam.sName = Me.sName Then
                   Me.sValue = QBTLParam.sDefault

EgtBEAMWALL.ViewerOptimizer/BTLViewModel/BTLPartVM.vb

@@ -5,6 +5,7 @@ Imports EgtBEAMWALL.Core
 Imports System.Collections.Specialized
 Imports System.ComponentModel
 Imports System.Windows.Threading
+Imports System.Security.Cryptography
 
 Public Class BTLPartVM
    Inherits VMBase
@@ -1535,13 +1536,30 @@ Public Class BTLPartVM
                ' aggiorno stato abilitazione del bottone modifica free contour
                Map.refFeatureManagerVM.SetEditIsEnabled()
                Map.refFeatureManagerVM.NotifyPropertyChanged(NameOf(Map.refFeatureManagerVM.Priority_Visibility))
-            Else
-               EgtDeselectAll()
+               ' Controlo se nPRC è 900 rendo visibile combobox Variant
+               If m_SelBTLFeatureVM.nPRC = 900 Then
+                  Map.refFeatureManagerVM.SetVariant_Visibility(Visibility.Visible)
+                  Dim nVariant As Integer = 0
+                  If Integer.TryParse(m_SelBTLFeatureVM.sDES, nVariant) Then
+                     m_SelBTLFeatureVM.nSelVARIANT = nVariant
+                  End If
+                  If m_SelBTLFeatureVM.nSelVARIANT > 0 AndAlso
+                     System.IO.File.Exists(Map.refMainWindowVM.MainWindowM.sResourcesRoot & "\Features\" & m_SelBTLFeatureVM.sDescGRP & "." & m_SelBTLFeatureVM.sDES & ".png") Then
+                     ' imposto path disegno da mostrare in BottomPanel
+                     Map.refBottomPanelVM.SetCurrDraw(Map.refMainWindowVM.MainWindowM.sResourcesRoot & "\Features\" & m_SelBTLFeatureVM.sDescGRP & "." & m_SelBTLFeatureVM.sDES & ".png")
+                  Else
+                     Map.refBottomPanelVM.SetCurrDraw(Map.refMainWindowVM.MainWindowM.sResourcesRoot & "\Features\" & m_SelBTLFeatureVM.sDescGRP & ".png")
+                  End If
+               Else
+                  Map.refFeatureManagerVM.SetVariant_Visibility(Visibility.Collapsed)
+               End If
+               Else
+                  EgtDeselectAll()
+               End If
+               Map.refLeftPanelVM.FeatureSelectionChanged()
             End If
-            Map.refLeftPanelVM.FeatureSelectionChanged()
-         End If
-         EgtDraw()
-         NotifyPropertyChanged(NameOf(SelBTLFeatureVM))
+            EgtDraw()
+            NotifyPropertyChanged(NameOf(SelBTLFeatureVM))
       End Set
    End Property
 
@@ -1724,8 +1742,14 @@ Public Class BTLPartVM
       m_BTLPartM.nFeaturesGlobalState = CalcStates.NOTCALCULATED
       If nState > CalcStates.NOTCALCULATED Then
          For Each Feature In BTLFeatureVMList
-            If Not Feature.bDO And Not bFeatureFirst Then Continue For
-
+            If Not Feature.bDO And Not bFeatureFirst Then
+               If Feature.nState = CalcStates.COLLISION AndAlso Feature.nState > m_BTLPartM.nGlobalState Then
+                  m_BTLPartM.nGlobalState = Feature.nState
+                  m_BTLPartM.nCALC_GlobalERR = Feature.nCALC_ERR
+               Else
+                  Continue For
+               End If
+            End If
             If ((Feature.nState = CalcStates.NOTCALCULATED And nState < CalcStates.WARNING) Or Not Feature.bDO) And bFeatureFirst Then
                m_BTLPartM.nGlobalState = Feature.nState
                m_BTLPartM.nCALC_GlobalERR = Feature.nCALC_ERR

EgtBEAMWALL.ViewerOptimizer/BTLViewModel/BTLStructureVM.vb

@@ -1122,7 +1122,9 @@ Public Class BTLStructureVM
 
       Dim bOn As Boolean = EgtBeamGetBuildingIsOn()
       If bShow <> bOn Then
+         'If bShow Then EgtBeamCalcAllSolids(True)
          EgtBeamShowBuilding(bShow)
+         'If Not bShow Then EgtBeamShowAllSolids(False)
       End If
 
       ' ripristino precedente impostazione modificato

EgtBEAMWALL.ViewerOptimizer/CALCPanel/CALCPanelVM.vb

@@ -355,7 +355,7 @@ Public Class CALCPanelVM
                ' Resetto feature in collisione
                For Each Feature In BTLPart.m_BTLFeatureVMList
                   If Feature.nState = CalcStates.COLLISION Then
-                     Feature.CalcFeatureUpdate(0, 0, "")
+                     Feature.ResetFeatureError()
                   End If
                Next
             Else
@@ -366,7 +366,7 @@ Public Class CALCPanelVM
                   ' Resetto feature in collisione
                   For Each Feature As BTLFeatureVM In Part.FeatureVMList
                      If Feature.nState = CalcStates.COLLISION Then
-                        Feature.CalcFeatureUpdate(0, 0, "")
+                        Feature.ResetFeatureError()
                      End If
                   Next
                Next
@@ -387,15 +387,15 @@ Public Class CALCPanelVM
                         ' aggiorno nuovo pezzo
                         CurrBTLPartVM = GetBTLPartVMFromBTLPartId(Line.nCUTID)
                         If IsNothing(CurrBTLPartVM) Then
+                           Line.ResetTypePart()
                            EgtOutLog("Error in CALC ProcessResult. CUTID " & Line.nCUTID & "not found in project(BTLPartVM).")
-                           Continue For
                         End If
                      Else
                         ' aggiorno nuovo pezzo
                         CurrPartVM = GetPartVMFromPartId(Line.nCUTID)
                         If IsNothing(CurrPartVM) Then
+                           Line.ResetTypePart()
                            EgtOutLog("Error in CALC ProcessResult. CUTID " & Line.nCUTID & "not found in project(PartVM).")
-                           Continue For
                         End If
                      End If
                   End If
@@ -422,14 +422,14 @@ Public Class CALCPanelVM
                   If nProgramPage = ProjectType.PROJ Then
                      CurrBTLFeatureVM = GetBTLFeatureVMFromBTLPartId(CurrBTLPartVM, Line.nTASKID)
                      If IsNothing(CurrBTLFeatureVM) Then
+                        Line.ResetTypeFeature()
                         EgtOutLog("Error in CALC ProcessResult. TASKID " & Line.nTASKID & "not found in BTLPartVM " & CurrBTLPartVM.nPartId)
-                        Continue For
                      End If
                   Else
                      CurrBTLFeatureVM = GetFeatureVMFromPartId(CurrPartVM, Line.nTASKID)
                      If IsNothing(CurrBTLFeatureVM) Then
+                        Line.ResetTypeFeature()
                         EgtOutLog("Error in CALC ProcessResult. TASKID " & Line.nTASKID & "not found in PartVM " & CurrPartVM.nPartId)
-                        Continue For
                      End If
                   End If
                Else

EgtBEAMWALL.ViewerOptimizer/ChangeParameterWnd/ChangeParameterWndVM.vb

@@ -30,7 +30,7 @@ Public Class ChangeParameterWndVM
             Dim ParamIndex As Integer = 1
             Dim NewBTLParam As BTLParamM = Nothing
             ' leggo tutti i P della feature
-            While BTLIniFile.GetBeamPrivateProfileParam(m_SelPRC.nGRP, m_SelPRC.nPRC, True, ParamIndex, Nothing, NewBTLParam)
+            While BTLIniFile.GetBeamPrivateProfileParam(m_SelPRC.nGRP, m_SelPRC.nPRC, m_SelPRC.nVARIANT, True, ParamIndex, Nothing, NewBTLParam)
                m_ParamList.Add(New Parameters(NewBTLParam))
                ParamIndex += 1
             End While

EgtBEAMWALL.ViewerOptimizer/ConfigurationPage/ConfigurationPageVM.vb

@@ -9,6 +9,8 @@ Imports Ionic.Zip
 Imports Org.BouncyCastle.Bcpg
 Imports Microsoft.VisualBasic.ApplicationServices
 Imports Renci.SshNet.Security
+Imports Google.Protobuf.WellKnownTypes
+Imports System.Globalization
 
 Public Class ConfigurationPageVM
    Inherits VMBase
@@ -673,9 +675,16 @@ Public Class ConfigurationPageVM
                   Dim sDayDir As String = sMonthDir & "\" & nDay
                   Dim VersionList() As String = Directory.GetFiles(sDayDir)
                   If VersionList.Length > 0 Then
-                     Dim nMaxVersion As Int64 = VersionList.Max(Function(x) Int64.Parse(Path.GetFileNameWithoutExtension(x)))
-                     sRestorePath = sDayDir & "\" & nMaxVersion & ".bwbck"
-                     Exit For
+                     Dim nMaxVersion As Int64 = 0
+                     For Each item As String In VersionList
+                        Dim nTmp As Int64 = 0
+                        Int64.TryParse(Path.GetFileNameWithoutExtension(item), nTmp)
+                        nMaxVersion = Math.Max(nMaxVersion, nTmp)
+                     Next
+                     If nMaxVersion > 0 Then
+                        sRestorePath = sDayDir & "\" & nMaxVersion & ".bwbck"
+                        Exit For
+                     End If
                   End If
                Next
                If Not String.IsNullOrEmpty(sRestorePath) Then Exit For
@@ -685,6 +694,8 @@ Public Class ConfigurationPageVM
       End If
       If String.IsNullOrEmpty(sRestorePath) Then
          MessageBox.Show(EgtMsg(62106), EgtMsg(15001), MessageBoxButton.OK, MessageBoxImage.Error)            ' Restore impossible! Last backup not found!
+         m_bRestoreRunning = False
+         Return
       End If
       If MessageBox.Show(String.Format(EgtMsg(62107), nYear, nMonth, nDay), EgtMsg(15002), MessageBoxButton.OKCancel, MessageBoxImage.Warning) <> MessageBoxResult.OK Then               'Are you sure you want to restore the last backup from {0}\{1}\{2}? If you proceed you will lose actual data!
          m_bRestoreRunning = False
@@ -960,7 +971,7 @@ Public Class ConfigurationPageVM
       ParamIndex = 1
       TempList = New List(Of QBTLParamVM)
       If IsP Then
-         While BTLIniFile.GetBeamPrivateProfileParam(GRPType, PRC, IsP, ParamIndex, Nothing, NewBTLParam)
+         While BTLIniFile.GetBeamPrivateProfileParam(GRPType, PRC, 0, IsP, ParamIndex, Nothing, NewBTLParam)
             TempList.Add(New QBTLParamVM(NewBTLParam, GRPType, PRC))
             ParamIndex += 1
          End While

EgtBEAMWALL.ViewerOptimizer/EgtBEAMWALL.ViewerOptimizer.vbproj

@@ -16,31 +16,6 @@
     </NuGetPackageImportStamp>
     <TargetFrameworkProfile />
   </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|AnyCPU' ">
-    <PlatformTarget>AnyCPU</PlatformTarget>
-    <DebugSymbols>true</DebugSymbols>
-    <DebugType>full</DebugType>
-    <DefineDebug>true</DefineDebug>
-    <DefineTrace>true</DefineTrace>
-    <IncrementalBuild>true</IncrementalBuild>
-    <OutputPath>bin\Debug\</OutputPath>
-    <DocumentationFile>EgtBEAMWALL.ViewerOptimizer.xml</DocumentationFile>
-    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
-    <Prefer32Bit>false</Prefer32Bit>
-  </PropertyGroup>
-  <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
-    <PlatformTarget>x86</PlatformTarget>
-    <DebugType>pdbonly</DebugType>
-    <DebugSymbols>false</DebugSymbols>
-    <DefineDebug>false</DefineDebug>
-    <DefineTrace>true</DefineTrace>
-    <IncrementalBuild>false</IncrementalBuild>
-    <Optimize>true</Optimize>
-    <OutputPath>bin\Release\</OutputPath>
-    <DocumentationFile>EgtBEAMWALL.ViewerOptimizer.xml</DocumentationFile>
-    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
-    <Prefer32Bit>false</Prefer32Bit>
-  </PropertyGroup>
   <PropertyGroup>
     <OptionExplicit>On</OptionExplicit>
   </PropertyGroup>
@@ -53,29 +28,6 @@
   <PropertyGroup>
     <OptionInfer>On</OptionInfer>
   </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x64'">
-    <DebugSymbols>true</DebugSymbols>
-    <DefineDebug>true</DefineDebug>
-    <DefineTrace>true</DefineTrace>
-    <OutputPath>bin\x64\Debug\</OutputPath>
-    <DocumentationFile>EgtBEAMWALL.ViewerOptimizer.xml</DocumentationFile>
-    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
-    <DebugType>full</DebugType>
-    <PlatformTarget>x64</PlatformTarget>
-    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
-    <Prefer32Bit>false</Prefer32Bit>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Release|x64'">
-    <DefineTrace>true</DefineTrace>
-    <OutputPath>bin\x64\Release\</OutputPath>
-    <DocumentationFile>EgtBEAMWALL.ViewerOptimizer.xml</DocumentationFile>
-    <Optimize>true</Optimize>
-    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
-    <DebugType>pdbonly</DebugType>
-    <PlatformTarget>x64</PlatformTarget>
-    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
-    <Prefer32Bit>false</Prefer32Bit>
-  </PropertyGroup>
   <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'Debug|x86'">
     <DebugSymbols>true</DebugSymbols>
     <DefineDebug>true</DefineDebug>
@@ -105,27 +57,6 @@
   <PropertyGroup>
     <ApplicationManifest>app.manifest</ApplicationManifest>
   </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'RemoteDebug|AnyCPU'">
-    <DebugSymbols>true</DebugSymbols>
-    <DefineDebug>true</DefineDebug>
-    <DefineTrace>true</DefineTrace>
-    <OutputPath>bin\RemoteDebug\</OutputPath>
-    <DocumentationFile>EgtBEAMWALL.ViewerOptimizer.xml</DocumentationFile>
-    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
-    <DebugType>full</DebugType>
-    <PlatformTarget>AnyCPU</PlatformTarget>
-  </PropertyGroup>
-  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'RemoteDebug|x64'">
-    <DebugSymbols>true</DebugSymbols>
-    <DefineDebug>true</DefineDebug>
-    <DefineTrace>true</DefineTrace>
-    <OutputPath>bin\x64\RemoteDebug\</OutputPath>
-    <DocumentationFile>EgtBEAMWALL.ViewerOptimizer.xml</DocumentationFile>
-    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
-    <DebugType>full</DebugType>
-    <PlatformTarget>x64</PlatformTarget>
-    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
-  </PropertyGroup>
   <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'RemoteDebug|x86'">
     <DebugSymbols>true</DebugSymbols>
     <DefineDebug>true</DefineDebug>
@@ -1008,6 +939,9 @@
   <ItemGroup>
     <Resource Include="Resources\OpenProjectFileDialog\Archived.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\OptimizePanel\PreNesting.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\EgtBEAMWALL\EgtBEAMWALL.ViewerOptimizerR32.exe

EgtBEAMWALL.ViewerOptimizer/FeatureManager/FeatureManagerV.xaml

@@ -32,6 +32,12 @@
                           Width="45"/>
    <TextBlock Text="{Binding Tag.sName, RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:FeatureManagerV}}}"
               Style="{StaticResource OptionTextBlock}"/>
+   <ComboBox ItemsSource="{Binding Tag.VARIANTList, RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:FeatureManagerV}}}"
+             SelectedItem="{Binding Tag.nSelVARIANT, RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:FeatureManagerV}}}"
+             IsEnabled="{Binding FeatureManager_IsEnabled}"
+             Visibility="{Binding Variant_Visibility}"
+             Style="{StaticResource FeatureComboBox}"/>
+
    <Button Content="{Binding Edit_Msg}"
            Command="{Binding Tag.Edit_Command, RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:FeatureManagerV}}}"
            Visibility="{Binding Tag.Edit_Visibility, RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:FeatureManagerV}}}"

EgtBEAMWALL.ViewerOptimizer/FeatureManager/FeatureManagerVM.vb

@@ -1,4 +1,5 @@
-Imports EgtUILib
+Imports EgtBEAMWALL.Core
+Imports EgtUILib
 Imports EgtWPFLib5
 
 Public Class FeatureManagerVM
@@ -16,6 +17,18 @@ Public Class FeatureManagerVM
       End Set
    End Property
 
+
+   Private m_Variant_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property Variant_Visibility As Visibility
+      Get
+         Return m_Variant_Visibility
+      End Get
+   End Property
+   Public Sub SetVariant_Visibility(value As Visibility)
+      m_Variant_Visibility = value
+      NotifyPropertyChanged(NameOf(Variant_Visibility))
+   End Sub
+
    Public ReadOnly Property Edit_IsEnabled As Boolean
       Get
          Return m_FeatureManager_IsEnabled AndAlso Not IsNothing(Map.refProjectVM.BTLStructureVM) AndAlso
@@ -97,7 +110,6 @@ Public Class FeatureManagerVM
       NotifyPropertyChanged(NameOf(Edit_IsEnabled))
    End Sub
 
-
 #End Region    ' METHODS
 
 End Class

EgtBEAMWALL.ViewerOptimizer/FreeContourManager/FreeContourManagerVM.vb

@@ -427,7 +427,7 @@ Public Class FreeContourManagerVM
       ' posiziono la griglia sul riferimento del contorno libero
       Dim frFace As New Frame3d
       EgtBeamGetSideData(SelFeature.nSelSIDE, frFace)
-      Dim frFrame As Frame3d = SelFeature.BTLFeatureM.frFRAME
+      Dim frFrame As New Frame3d(SelFeature.BTLFeatureM.frFRAME)
       frFrame.ToGlob( frFace)
       EgtSetGridFrame(frFrame)
       EgtSetGridShow(True, True)

EgtBEAMWALL.ViewerOptimizer/ItemParamList/FeatureListV.xaml

@@ -24,7 +24,7 @@
          <DataGridCheckBoxColumn x:Key="colDO" Binding="{Binding bDO, UpdateSourceTrigger=PropertyChanged}"
                                  MinWidth="28">
             <DataGridCheckBoxColumn.Header>
-               <CheckBox IsChecked="{Binding Path=Tag.bDOALL, RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:FeatureListV}}}"/>
+               <CheckBox IsChecked="{Binding Path=Tag.bDOALL, RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:FeatureListV}}}" HorizontalAlignment="Center"/>
             </DataGridCheckBoxColumn.Header>
          </DataGridCheckBoxColumn>
          <!--Validità feature-->

EgtBEAMWALL.ViewerOptimizer/LeftPanel/LeftPanelVM.vb

@@ -928,8 +928,15 @@ Public Class LeftPanelVM
          Case MCH_CR.BR
             dPosX = WallMachGroup.dL - PartToAdd.dL - dPosX
       End Select
+      ' calcolo box del pezzo e del suo layer box per compensare la  eventuale differenza
+      Dim b3Part As New BBox3d
+      EgtGetBBoxGlob(nPartDuploId, GDB_BB.STANDARD, b3Part)
+      Dim b3Box As New BBox3d
+      Dim nBoxLayerId As Integer = EgtGetFirstNameInGroup(nPartDuploId, "Box")
+      EgtGetBBoxGlob(nBoxLayerId, GDB_BB.STANDARD, b3Box)
+      Dim vtDeltaBox As Vector3d = b3Box.Min - b3Part.Min
       ' aggiungo il pezzo al grezzo
-      If EgtAddPartToRawPart(nPartDuploId, New Point3d(dPosX, dPosY, 0), WallMachGroup.MyMachGroupM.nRawPartId) Then
+      If EgtAddPartToRawPart(nPartDuploId, New Point3d(dPosX - vtDeltaBox.x, dPosY - vtDeltaBox.y, 0 - vtDeltaBox.z), WallMachGroup.MyMachGroupM.nRawPartId) Then
          EgtSetInfo(nPartDuploId, MGR_PRT_POSX, dPosX)
          EgtSetInfo(nPartDuploId, MGR_PRT_POSY, dPosY)
          EgtSetInfo(nPartDuploId, MGR_PRT_ROT, PartToAdd.nROTATED)
@@ -1356,7 +1363,7 @@ Public Class LeftPanelVM
             NewFeat.CalcParamArray(vPar, sPar, vParQ)
             ' aggiorno la feature con nuovo valore
             EgtBeamSetPart(Map.refProjectVM.BTLStructureVM.SelBTLPart.nPartId)
-            nNewFeatureId = EgtBeamAddProcess(NewFeat.nSelGRP, NewFeat.nPRC, NewFeat.nSelSIDE, "",
+            nNewFeatureId = EgtBeamAddProcess(NewFeat.nSelGRP, NewFeat.nPRC, NewFeat.nSelSIDE, NewFeat.sDES,
                                               Map.refProjectVM.BTLStructureVM.SelBTLPart.BTLPartM.NewProcId(),
                                               New Frame3d(), vPar, sPar, vParQ, GDB_ID.NULL, GDB_ID.NULL)
             bMacroFlag = False

EgtBEAMWALL.ViewerOptimizer/MachGroupPanel/MyMachGroupVM.vb

@@ -120,6 +120,10 @@ Public Class MyMachGroupVM
                               EgtMovePartInRawPart(Part.nPartId, New Vector3d(dValue - MyMachGroupM.dL, 0, 0))
                            Next
                         End If
+                        ' ripristino eventuale PosZ
+                        If MyMachGroupM.dPosZ >= 0 Then
+                           EgtMoveRawPart(nRawPartId, New Vector3d(0, 0, MyMachGroupM.dPosZ))
+                        End If
                         EgtSetInfo(Id, MGR_RPT_PANELLEN, dValue)
                         EgtDraw()
                         MyMachGroupM.dL = dValue
@@ -191,6 +195,10 @@ Public Class MyMachGroupVM
                            EgtMovePartInRawPart(Part.nPartId, New Vector3d(0, dValue - MyMachGroupM.dW, 0))
                         Next
                      End If
+                     ' ripristino eventuale PosZ
+                     If MyMachGroupM.dPosZ >= 0 Then
+                        EgtMoveRawPart(nRawPartId, New Vector3d(0, 0, MyMachGroupM.dPosZ))
+                     End If
                      EgtSetInfo(Id, MGR_RPT_PANELWIDTH, dValue)
                      EgtDraw()
                      MyMachGroupM.dW = dValue
@@ -526,7 +534,7 @@ Public Class MyMachGroupVM
          nRawId = EgtGetFirstRawPart()
       End While
       Dim sLogPath As String = Map.refMainWindowVM.MainWindowM.sTempDir & "\RawPartLog.txt"
-      Return ExecBeam(sLogPath, Map.refMachinePanelVM.SelectedMachine.Name, CalcIntegration.CmdTypes.RAWPART, False) 
+      Return ExecBeam(sLogPath, Map.refMachinePanelVM.SelectedMachine.Name, CalcIntegration.CmdTypes.RAWPART, False)
    End Function
 
    Friend Sub MoveBeam(Beam As PartVM, MoveDirection As MoveDirections)
@@ -899,14 +907,14 @@ Class CopyPart
          Return m_BTLPart
       End Get
    End Property
-   Private m_sPosX As Double
-   Public ReadOnly Property sPosX As Double
+   Private m_sPosX As String
+   Public ReadOnly Property sPosX As String
       Get
          Return m_sPosX
       End Get
    End Property
-   Private m_sPosY As Double
-   Public ReadOnly Property sPosY As Double
+   Private m_sPosY As String
+   Public ReadOnly Property sPosY As String
       Get
          Return m_sPosY
       End Get
@@ -924,7 +932,7 @@ Class CopyPart
       End Get
    End Property
 
-   Sub New(BTLPart As BTLPartVM, sPosX As Double, sPosY As Double, dRot As Double, nFlip As Integer)
+   Sub New(BTLPart As BTLPartVM, sPosX As String, sPosY As String, dRot As Double, nFlip As Integer)
       m_BTLPart = BTLPart
       m_sPosX = sPosX
       m_sPosY = sPosY

EgtBEAMWALL.ViewerOptimizer/MachGroupPanel/PartVM.vb

@@ -213,7 +213,7 @@ Public Class PartVM
             ' calcolo distanza tra i box
             Dim vtDeltaBox As Vector3d = b3Box.Min - b3Part.Min
             ' reinserisco il pezzo nel grezzo
-            EgtAddPartToRawPart(nPartId, New Point3d(dTempPosX - vtDeltaBox.x, dTempPosY - vtDeltaBox.y, 0), ParentMachGroupVM.MyMachGroupM.nRawPartId)
+            EgtAddPartToRawPart(nPartId, New Point3d(dTempPosX - vtDeltaBox.x, dTempPosY - vtDeltaBox.y, 0 - vtDeltaBox.z), ParentMachGroupVM.MyMachGroupM.nRawPartId)
             ' lo riseleziono
             EgtSelectObj(nPartId)
             ' resetto validazione del pezzo

EgtBEAMWALL.ViewerOptimizer/MainWindow/MainWindowM.vb

@@ -242,8 +242,8 @@ Public Class MainWindowM
          EgtSetLockId( sLockId)
       End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2512, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5327, 2512, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2704, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(5327, 2704, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & VWOPTGENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

EgtBEAMWALL.ViewerOptimizer/MainWindow/MainWindowVM.vb

@@ -198,9 +198,16 @@ Public Class MainWindowVM
                      Dim sDayDir As String = sMonthDir & "\" & nDay
                      Dim VersionList() As String = Directory.GetFiles(sDayDir)
                      If VersionList.Length > 0 Then
-                        Dim nMaxVersion As Int64 = VersionList.Max(Function(x) Int64.Parse(Path.GetFileNameWithoutExtension(x)))
-                        LastBackupDate = New Date(nYear, nMonth, nDay)
-                        Exit For
+                        Dim nMaxVersion As Int64 = 0
+                        For Each item As String In VersionList
+                           Dim nTmp As Int64 = 0
+                           Int64.TryParse(Path.GetFileNameWithoutExtension(item), nTmp)
+                           nMaxVersion = Math.Max(nMaxVersion, nTmp)
+                        Next
+                        If nMaxVersion > 0 Then
+                           LastBackupDate = New Date(nYear, nMonth, nDay)
+                           Exit For
+                        End If
                      End If
                   Next
                   If LastBackupDate <> Date.MinValue Then Exit For

EgtBEAMWALL.ViewerOptimizer/My Project/AssemblyInfo.vb

@@ -30,7 +30,7 @@ Imports System.Windows
 #End If
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("EgtBEAMWALL.ViewerOptimizer")>
-<Assembly: AssemblyCopyright("Copyright ©  2020-2023 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2020-2025 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(false)>
 
@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.12.2")>
-<Assembly: AssemblyFileVersion("2.5.12.2")>
+<Assembly: AssemblyVersion("2.7.10.1")>
+<Assembly: AssemblyFileVersion("2.7.10.1")>

EgtBEAMWALL.ViewerOptimizer/NestingRunningWnd/NestingRunningWndVM.vb

@@ -243,6 +243,8 @@ Public Class NestingRunningWndVM
       Dim WhType = GetMainPrivateProfileInt(S_WAREHOUSE, EgtBEAMWALL.Core.ConstIni.K_TYPE, 2)
       Dim sWarehouseIniPath As String = ""
       Dim dOffset As Double = WarehouseHelper.GetOffset(Map.refProjectVM.BTLStructureVM.nPROJTYPE)
+      Dim nNestingType As Integer = WarehouseHelper.GetNestingType(Map.refProjectVM.BTLStructureVM.nPROJTYPE)
+      Dim sPanelSaw As String = WarehouseHelper.GetPanelSaw(Map.refProjectVM.BTLStructureVM.nPROJTYPE)
       Dim dStartOffset As Double = 0
       Dim dKerf As Double = 0
       Select Case WhType
@@ -315,7 +317,7 @@ Public Class NestingRunningWndVM
          End If
          ' passo a lua lista id pezzi da nestare
          If SectionProgress.SectionPartList.Count > 0 AndAlso SectionProgress.SParamList.Count > 0 AndAlso
-            Not ExecNesting(sLogPath, CurrentMachine.sMachineName, SectionProgress.SectionPartList, SectionProgress.SParamList, dStartOffset, dOffset, dKerf, m_bLDIntersOther, m_nMinScore, SectionProgress.dCalcNestTime) Then
+            Not ExecNesting(sLogPath, CurrentMachine.sMachineName, SectionProgress.SectionPartList, SectionProgress.SParamList, dStartOffset, dOffset, dKerf, m_bLDIntersOther, m_nMinScore, SectionProgress.dCalcNestTime, nNestingType, sPanelSaw) Then
             Exit For
          End If
       Next
@@ -354,7 +356,11 @@ Public Class NestingRunningWndVM
             dRawPartH = b3Box.DimZ
          End If
          ' verifico che sia tra quelli da nestare
-         If dRawPartH <= 0 Or Not m_SectionProgressList.Any(Function(x) x.Section.dH = dRawPartH) Then Continue While
+         If dRawPartH <= 0 Or Not m_SectionProgressList.Any(Function(x) (Math.Abs(x.Section.dH - dRawPartH)) < (100 * EPS_SMALL)) Then
+            ' passo al prossimo RawPart
+            nRawPartId = EgtGetNext(nRawPartId)
+            Continue While
+         End If
          ' recupero il contorno
          Dim nOutlineLayerId As Integer = EgtGetFirstNameInGroup(nRawPartId, "Outline")
          Dim nOutlineId As Integer = EgtGetFirstInGroup(nOutlineLayerId)

EgtBEAMWALL.ViewerOptimizer/OptimizePanel/OptimizePanelV.xaml

@@ -70,6 +70,13 @@
       <Image Source="/Resources/OptimizePanel/UnlockRotation.png" Stretch="Uniform"/>
    </Button>
 
+   <Button ToolTip="{Binding PreNesting_ToolTip}"
+           Style="{StaticResource ToolBar_Button}"
+           Command="{Binding PreNesting_Command}"
+           Visibility="{Binding MachiningPage_Visibility}">
+      <Image Source="/Resources/OptimizePanel/PreNesting.png" Stretch="Uniform"/>
+   </Button>
+
    <Button ToolTip="{Binding Warehouse_ToolTip}"
            Style="{StaticResource ToolBar_Button}"
            Command="{Binding Warehouse_Command}"

EgtBEAMWALL.ViewerOptimizer/OptimizePanel/OptimizePanelVM.vb

@@ -1,4 +1,5 @@
 Imports System.Collections.ObjectModel
+Imports System.IO
 Imports System.Threading
 Imports EgtBEAMWALL.Core
 Imports EgtUILib
@@ -136,6 +137,13 @@ Public Class OptimizePanelVM
       End Get
    End Property
 
+   Public ReadOnly Property PreNestingBtn_Visibility As Visibility
+      Get
+         Return If(WarehouseHelper.GetNestingType(Map.refProjectVM.BTLStructureVM.nPROJTYPE) = 2, Visibility.Visible, Visibility.Collapsed)
+      End Get
+   End Property
+
+
 #Region "Messages"
 
    Public ReadOnly Property LongDrillArea_Msg As String
@@ -187,6 +195,7 @@ Public Class OptimizePanelVM
    Private m_cmdCalcRotFlip As ICommand
    Private m_cmdUnlockRot As ICommand
    Private m_cmdUnlockFlip As ICommand
+   Private m_cmdPreNesting As ICommand
    Private m_cmdWarehouse As ICommand
 
 #End Region    ' FIELDS & PROPERTIES
@@ -200,6 +209,7 @@ Public Class OptimizePanelVM
       m_SelOriginType = OriginTypeList(0)
       m_bLDIntersOther = False
       NotifyPropertyChanged(NameOf(SelPartType))
+      NotifyPropertyChanged(NameOf(PreNestingBtn_Visibility))
    End Sub
 
 #End Region    ' CONSTRUCTOR
@@ -466,6 +476,53 @@ Public Class OptimizePanelVM
 
 #End Region ' Optimize
 
+#Region "PreNesting"
+
+   ''' <summary>
+   ''' Returns a command that do Open.
+   ''' </summary>
+   Public ReadOnly Property PreNesting_Command As ICommand
+      Get
+         If m_cmdPreNesting Is Nothing Then
+            m_cmdPreNesting = New Command(AddressOf PreNesting)
+         End If
+         Return m_cmdPreNesting
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Execute the Open.  This method is invoked by the OpenCommand.
+   ''' </summary>
+   Friend Sub PreNesting()
+      If Not IsNothing(Map.refProdManagerVM.CurrProd) Then
+         Dim sPanelSaw As String = WarehouseHelper.GetPanelSaw(Map.refProjectVM.BTLStructureVM.nPROJTYPE)
+         Dim sLogPath As String = Map.refMainWindowVM.MainWindowM.sTempDir & "\PreNestingLog.txt"
+         ExecNesting(sLogPath, 11, sPanelSaw)
+         Dim CutListFileName As String = "CutList"
+         Dim FileList() As String = Directory.GetFiles(Map.refProdManagerVM.CurrProd.sProdDirPath)
+         Dim SawPanelList As List(Of String) = FileList.Where(Function(x) Path.GetFileName(x).StartsWith(CutListFileName)).ToList
+         Dim sSaveCncPath As String = ""
+         GetPrivateProfileString(S_GENERAL, K_SAVECNCPATH, "", sSaveCncPath, CurrentMachine.sMachIniFile)
+         Dim sMessage As String = ""
+         For Each SawPanelFile In SawPanelList
+            Try
+               Dim sNewPath As String = sSaveCncPath & "\" & Path.GetFileName(SawPanelFile)
+               File.Copy(SawPanelFile, sNewPath, True)
+               ' sMessage &= String.Format("File copied! You can find it at {0}", {sNewPath}) & Environment.NewLine
+            Catch ex As Exception
+               sMessage &= String.Format("Copy of {0} to {1} folder failed!", {SawPanelFile, sSaveCncPath}) & Environment.NewLine
+            End Try
+         Next
+         If String.IsNullOrWhiteSpace(sMessage) Then
+            MessageBox.Show("All files copied correctly!", "Info", MessageBoxButton.OK, MessageBoxImage.Information)
+         Else
+            MessageBox.Show(sMessage, "Info", MessageBoxButton.OK, MessageBoxImage.Information)
+         End If
+      End If
+   End Sub
+
+#End Region ' PreNesting
+
 #Region "Warehouse"
 
    ''' <summary>

EgtBEAMWALL.ViewerOptimizer/ProdManager/ProdManagerVM.vb

@@ -611,27 +611,32 @@ Public Class ProdManagerVM
    ''' </summary>
    Friend Sub GoToSupervisor()
       If IsNothing(m_CurrProd) Then Return
-      ' apro supervisore
-      Dim sSupervisorName As String = "EgtBEAMWALL.SupervisorR32"
-      ' recupero processo del supervisore
-      Dim localProc As Process() = Process.GetProcessesByName(sSupervisorName)
-      If localProc.Length > 0 Then
-         For Each p As Process In localProc
-            ' porto in primo piano il Supervisor
-            BringWindowToFront(p.MainWindowHandle)
-            Exit For
-         Next
+      ' verifico se modalita' supervisore attiva
+      If GetPrivateProfileInt(S_GENERAL, K_SUPERVISOR, 1, CurrentMachine.sMachIniFile) = 1 Then
+         ' apro supervisore
+         Dim sSupervisorName As String = "EgtBEAMWALL.SupervisorR32"
+         ' recupero processo del supervisore
+         Dim localProc As Process() = Process.GetProcessesByName(sSupervisorName)
+         If localProc.Length > 0 Then
+            For Each p As Process In localProc
+               ' porto in primo piano il Supervisor
+               BringWindowToFront(p.MainWindowHandle)
+               Exit For
+            Next
+         Else
+            Dim sSupervisorPath As String = Path.GetDirectoryName(System.AppDomain.CurrentDomain.BaseDirectory) & "\" & sSupervisorName & ".exe"
+            Try
+               Process.Start(sSupervisorPath, "1 " & CurrProd.nProdId)
+            Catch ex As Exception
+               EgtOutLog("Error: impossible starting supervisor from path " & sSupervisorPath)
+            End Try
+         End If
+         ' mando richiesta di apertura progetto in supervisore
+         'Dim x = DbControllers.m_StatusMapController.GetProd
+         DbControllers.m_StatusMapController.UpdateAction(DbControllers.m_SupervisorId, Map.refProdManagerVM.CurrProd.nProdId, Map.refProdManagerVM.CurrProd.nProdId, StatusMapItemType.Comm, StatusMapOpType.ChangeProdInSupervisorRequest, "")
       Else
-         Dim sSupervisorPath As String = Path.GetDirectoryName(System.AppDomain.CurrentDomain.BaseDirectory) & "\" & sSupervisorName & ".exe"
-         Try
-            Process.Start(sSupervisorPath, "1 " & CurrProd.nProdId)
-         Catch ex As Exception
-            EgtOutLog("Error: impossible starting supervisor from path " & sSupervisorPath)
-         End Try
+         MessageBox.Show("Supervisor is not available for this machine!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
       End If
-      ' mando richiesta di apertura progetto in supervisore
-      'Dim x = DbControllers.m_StatusMapController.GetProd
-      DbControllers.m_StatusMapController.UpdateAction(DbControllers.m_SupervisorId, Map.refProdManagerVM.CurrProd.nProdId, Map.refProdManagerVM.CurrProd.nProdId, StatusMapItemType.Comm, StatusMapOpType.ChangeProdInSupervisorRequest, "")
    End Sub
 
 #End Region ' GoToSupervisor

EgtBEAMWALL.ViewerOptimizer/ProjManager/ProjManagerVM.vb

@@ -1484,7 +1484,13 @@ Public Class ProjManagerVM
       ' creo cartella temporanea di estrazione in Temp
       Dim sProjectimportDir As String = Map.refMainWindowVM.MainWindowM.sTempDir & "\ProjectImport"
       If Directory.Exists(sProjectimportDir) Then
-         Directory.Delete(sProjectimportDir, True)
+         Try
+            Directory.Delete(sProjectimportDir, True)
+         Catch ex As Exception
+            EgtOutLog("Delete old import project failed!")
+            MessageBox.Show("Importazione Fallita!", "Errore", MessageBoxButton.OK, MessageBoxImage.Error)
+            Return
+         End Try
       End If
       Directory.CreateDirectory(sProjectimportDir)
       Try

EgtBEAMWALL.ViewerOptimizer/SceneHost/MySceneHostVM.vb

@@ -65,6 +65,12 @@ Public Class MySceneHostVM
          Dim hMainWnd As IntPtr = New WindowInteropHelper(Application.Current.MainWindow).Handle
          EgtSetMainWindowHandle(hMainWnd)
          EgtSetCurrentContext(MainScene.GetCtx())
+         ' Imposto direttorio ausiliario per import/gestione BTL
+         Dim sBtlAuxDir As String = String.Empty
+         GetMainPrivateProfileString(S_IMPORT, K_BTLAUXDIR, "", sBtlAuxDir)
+         If Not EgtSetBtlAuxDir(sBtlAuxDir) Then
+            EgtOutLog("Missing BtlAuxDir path! Will be impossible to load Variant!")
+         End If
          ' inizializzo gestore travi e pareti
          EgtInitBeamMgr(EIB_FL.TS3_POS + EIB_FL.USEUATTR)
          ' inizializzo gestore lavorazioni

EgtBEAMWALL.ViewerOptimizer/StatusBar/MyStatusBarVM.vb

@@ -58,7 +58,11 @@ Public Class MyStatusBarVM
       ' Costringo ad aggiornare
       UpdateUI()
       ' Eventuale attesa
-      Thread.Sleep(nPause)
+      If nPause >= 0 Then
+         Thread.Sleep(nPause)
+      'ElseIf nPause = 1 Then
+      '   EgtDraw()
+      End If
       ' Ritorno eventuale stop
       If m_bStopProgress Then
          m_bStopProgress = False

EgtBEAMWALL.ViewerOptimizer/TopPanel/TopPanelVM.vb

@@ -1,4 +1,5 @@
 Imports System.Collections.ObjectModel
+Imports System.IO
 Imports EgtBEAMWALL.Core
 Imports EgtUILib
 Imports EgtWPFLib5
@@ -240,8 +241,32 @@ Public Class TopPanelVM
          Map.refCALCPanelVM.Verify()
          Return
       End If
-      If Not Produce(Map.refMachGroupPanelVM.SelectedMachGroup, ErrorMsg) AndAlso Not String.IsNullOrWhiteSpace(ErrorMsg) Then
-         MessageBox.Show(ErrorMsg)
+      ' verifico se modalita' supervisore attiva
+      If GetPrivateProfileInt(S_GENERAL, K_SUPERVISOR, 1, CurrentMachine.sMachIniFile) = 1 Then
+         If Not Produce(Map.refMachGroupPanelVM.SelectedMachGroup, ErrorMsg) AndAlso Not String.IsNullOrWhiteSpace(ErrorMsg) Then
+            MessageBox.Show(ErrorMsg)
+         End If
+      Else
+         ' altrimenti lo copio se path disponibile
+         If Map.refMachGroupPanelVM.SelectedMachGroup.nGlobalState = CalcStates.OK Or Map.refMachGroupPanelVM.SelectedMachGroup.nGlobalState = CalcStates.INFO Then
+            Dim sSaveCncPath As String = ""
+            GetPrivateProfileString(S_GENERAL, K_SAVECNCPATH, "", sSaveCncPath, CurrentMachine.sMachIniFile)
+            Dim sSaveExt As String = ""
+            GetPrivateProfileString(S_GENERAL, K_SAVEEXT, "", sSaveExt, CurrentMachine.sMachIniFile)
+            If String.IsNullOrWhiteSpace(sSaveExt) Then
+               sSaveExt = ".cnc"
+            ElseIf sSaveExt(0) <> "." Then
+               sSaveExt = "." & sSaveExt
+            End If
+            Dim sMachGroupFilePath As String = Map.refProdManagerVM.CurrProd.sProdDirPath & "\" & Map.refMachGroupPanelVM.SelectedMachGroup.Name.ToString() & ".cnc"
+            Try
+               Dim sNewPath As String = sSaveCncPath & "\" & Map.refProdManagerVM.CurrProd.sProdId & "-" & Map.refMachGroupPanelVM.SelectedMachGroup.Name.ToString() & sSaveExt
+               File.Copy(sMachGroupFilePath, sNewPath, True)
+               MessageBox.Show(String.Format("File copied! You can find it at {0}", {sNewPath}), "Info", MessageBoxButton.OK, MessageBoxImage.Information)
+            Catch ex As Exception
+               MessageBox.Show(String.Format("Copy of {0} to {1} folder failed!", {sMachGroupFilePath, sSaveCncPath}), "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+            End Try
+         End If
       End If
    End Sub
 
@@ -306,12 +331,45 @@ Public Class TopPanelVM
       End If
       If Map.refMachGroupPanelVM.MachGroupVMList.Count > 0 Then
          Dim MachgroupErrorList As New List(Of MachGroupVM)
+         Dim sErrorMessage As String = ""
+         Dim bErrorMessage As Boolean = False
          For Each Machgroup In Map.refMachGroupPanelVM.MachGroupVMList
-            Dim ErrorMsg As String = ""
-            If Not Produce(Machgroup, ErrorMsg) AndAlso Not String.IsNullOrWhiteSpace(ErrorMsg) Then
-               MachgroupErrorList.Add(Machgroup)
+            ' verifico se modalita' supervisore attiva
+            If GetPrivateProfileInt(S_GENERAL, K_SUPERVISOR, 1, CurrentMachine.sMachIniFile) = 1 Then
+               Dim ErrorMsg As String = ""
+               If Not Produce(Machgroup, ErrorMsg) AndAlso Not String.IsNullOrWhiteSpace(ErrorMsg) Then
+                  MachgroupErrorList.Add(Machgroup)
+               End If
+            Else
+               ' altrimenti lo copio se path disponibile
+               If DirectCast(Machgroup, MyMachGroupVM).nGlobalState = CalcStates.OK Or DirectCast(Machgroup, MyMachGroupVM).nGlobalState = CalcStates.INFO Then
+                  Dim sSaveCncPath As String = ""
+                  GetPrivateProfileString(S_GENERAL, K_SAVECNCPATH, "", sSaveCncPath, CurrentMachine.sMachIniFile)
+                  Dim sSaveExt As String = ""
+                  GetPrivateProfileString(S_GENERAL, K_SAVEEXT, "", sSaveExt, CurrentMachine.sMachIniFile)
+                  If String.IsNullOrWhiteSpace(sSaveExt) Then
+                     sSaveExt = ".cnc"
+                  ElseIf sSaveExt(0) <> "." Then
+                     sSaveExt = "." & sSaveExt
+                  End If
+                  If String.IsNullOrWhiteSpace(sSaveCncPath) OrElse Not Directory.Exists(sSaveCncPath) Then Return
+                  Dim sMachGroupFilePath As String = Map.refProdManagerVM.CurrProd.sProdDirPath & "\" & Machgroup.Name.ToString() & ".cnc"
+                  Try
+                     Dim sNewPath As String = sSaveCncPath & "\" & Map.refProdManagerVM.CurrProd.sProdId & "-" & Machgroup.Name.ToString() & sSaveExt
+                     File.Copy(sMachGroupFilePath, sNewPath, True)
+                     ' sErrorMessage &= String.Format("File copied! You can find it at {0}", {sNewPath}) & Environment.NewLine
+                  Catch ex As Exception
+                     sErrorMessage &= String.Format("Copy of {0} to {1} folder failed!", {sMachGroupFilePath, sSaveCncPath}) & Environment.NewLine
+                  End Try
+               End If
             End If
          Next
+         If String.IsNullOrWhiteSpace(sErrorMessage) Then
+            MessageBox.Show("All files copied correctly!", "Info", MessageBoxButton.OK, MessageBoxImage.Information)
+         Else
+            'sErrorMessage = "Results for all the parts generated:" & Environment.NewLine & sErrorMessage
+            MessageBox.Show(sErrorMessage, If(bErrorMessage, "Error", "Info"), MessageBoxButton.OK, MessageBoxImage.Information)
+         End If
          If MachgroupErrorList.Count > 0 Then
             Dim sMachGroups As String = ""
             For Each MachGroup In MachgroupErrorList

EgtBEAMWALL.ViewerOptimizer/Utility/LuaExec.vb

@@ -74,7 +74,7 @@ Module LuaExec
       Return bOk
    End Function
 
-   Friend Function ExecNesting(sFile As String, sMachine As String, PartList As List(Of BTLPartM), SectionList As List(Of SParam), dStartOffset As Double, dOffset As Double, dKerf As Double, bLDIntersOther As Boolean, nMinScore As Integer, nNestTime As Integer) As Boolean
+   Friend Function ExecNesting(sFile As String, sMachine As String, PartList As List(Of BTLPartM), SectionList As List(Of SParam), dStartOffset As Double, dOffset As Double, dKerf As Double, bLDIntersOther As Boolean, nMinScore As Integer, nNestTime As Integer, nFlag As Integer, sPanelSaw As String) As Boolean
       If PartList.Count = 0 Then
          EgtOutLog("Exit nesting: no parts received!")
          Return True
@@ -105,6 +105,8 @@ Module LuaExec
       EgtLuaSetGlobNumVar("NEST.KERF", dKerf)
       EgtLuaSetGlobNumVar("NEST.DRILL_MACH_AREA", If(bLDIntersOther, 1, 0))
       EgtLuaSetGlobNumVar("NEST.MIN_ANGLE_PNT", nMinScore)
+      EgtLuaSetGlobNumVar("NEST.FLAG", nFlag)
+      EgtLuaSetGlobStringVar("NEST.PANELSAW", sPanelSaw)
       Dim nNestCorner As Integer
       Select Case CurrentMachine.NestingCorner
          Case MCH_CR.TL
@@ -162,6 +164,46 @@ Module LuaExec
       Return bOk
    End Function
 
+   Friend Function ExecNesting(sFile As String, nFlag As Integer, sPanelSaw As String) As Boolean
+      EgtOutLog("-- Start ExecNest --")
+      ' Recupero lo script da eseguire
+      Dim sExecPath As String = ""
+      Dim sExecName As String = ""
+      GetMainPrivateProfileString(S_NEST, K_NESTEXEC, "", sExecName)
+      Dim sRoot As String = ""
+      If Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.BEAM Then
+         sRoot = Map.refMainWindowVM.MainWindowM.sBeamRoot
+      ElseIf Map.refProjectVM.BTLStructureVM.nPROJTYPE = MachineType.WALL Then
+         sRoot = Map.refMainWindowVM.MainWindowM.sWallRoot
+      End If
+      sExecPath = (sRoot & "\" & sExecName).TrimEnd({"\"c})
+      If Not My.Computer.FileSystem.FileExists(sExecPath) Then
+         EgtOutLog("Not found NestExec script " & sExecPath)
+         Return False
+      End If
+      ' Assegno i dati
+      EgtLuaCreateGlobTable("NEST")
+      EgtLuaSetGlobStringVar("NEST.BASEDIR", sRoot)
+      EgtLuaSetGlobStringVar("NEST.FILE", sFile)
+      EgtLuaSetGlobNumVar("NEST.FLAG", nFlag)
+      EgtLuaSetGlobStringVar("NEST.PANELSAW", sPanelSaw)
+      ' Eseguo lo script
+      Dim bOk As Boolean = False
+      If EgtLuaExecFile(sExecPath) Then
+         ' Recupero i risultati
+         Dim nErr As Integer = 999
+         EgtLuaGetGlobIntVar("NEST.ERR", nErr)
+         bOk = (nErr <= 0)
+         If Not bOk Then EgtOutLog("NestExec Err=" & nErr.ToString())
+      Else
+         bOk = False
+         EgtOutLog("Error executing Nest Exec script " & sExecPath)
+      End If
+      ' Cancello tavola globale
+      EgtLuaResetGlobVar("NEST")
+      Return bOk
+   End Function
+
    Friend Function ExecRotFlip(nPartId As Integer) As Boolean
       If IsNothing(nPartId) OrElse nPartId = GDB_ID.NULL Then
          EgtOutLog("Exit nesting: no parts received!")

EgtBEAMWALL.ViewerOptimizer/WarehouseWnd/WarehouseHelper.vb

@@ -43,6 +43,28 @@ Module WarehouseHelper
       End If
    End Function
 
+   ' funzione che restituisce il flag
+   Public Function GetNestingType(Type As BWType) As Integer
+      If Type = BWType.BEAM Then
+         Return GenInterface.GetPrivateProfileInt(WRH_BEAM, WRH_NESTINGTYPE, 1, GetWarehouseIniPath())
+      Else
+         Return GenInterface.GetPrivateProfileInt(WRH_WALL, WRH_NESTINGTYPE, 1, GetWarehouseIniPath())
+      End If
+   End Function
+
+   ' funzione che restituisce il PanelSaw
+   Public Function GetPanelSaw(Type As BWType) As String
+      If Type = BWType.BEAM Then
+         Dim sPanelSaw As String = ""
+         GenInterface.GetPrivateProfileString(WRH_BEAM, WRH_PANELSAW, "", sPanelSaw, GetWarehouseIniPath())
+         Return sPanelSaw
+      Else
+         Dim sPanelSaw As String = ""
+         GenInterface.GetPrivateProfileString(WRH_WALL, WRH_PANELSAW, "", sPanelSaw, GetWarehouseIniPath())
+         Return sPanelSaw
+      End If
+   End Function
+
    ' funzione che restituisce l'offset dato spessore pareti
    Public Function GetWallOffsetByWidth(dHeight As Double) As Double
       Dim dOffset As Double = 0
@@ -162,11 +184,11 @@ Module WarehouseHelper
          Dim SectionData() As String = sSectionData.Split(","c)
          Select Case Type
             Case BWType.BEAM
-               Dim dSectionW As Double = 0 : StringToDoubleAdv( SectionData(0), dSectionW)
-               Dim dSectionH As Double = 0 : StringToDoubleAdv( SectionData(1), dSectionH)
+               Dim dSectionW As Double = 0 : StringToDoubleAdv(SectionData(0), dSectionW)
+               Dim dSectionH As Double = 0 : StringToDoubleAdv(SectionData(1), dSectionH)
                For Each SectionProgress In SectionList
-                  If Math.Abs( SectionProgress.Section.dW - dSectionW) < 0.1 AndAlso
-                     Math.Abs( SectionProgress.Section.dH - dSectionH) < 0.1 AndAlso SectionProgress.Section.sMaterial.Contains(SectionData(2)) Then
+                  If Math.Abs(SectionProgress.Section.dW - dSectionW) < 0.1 AndAlso
+                     Math.Abs(SectionProgress.Section.dH - dSectionH) < 0.1 AndAlso SectionProgress.Section.sMaterial.Contains(SectionData(2)) Then
                      If Not StringToDoubleAdv(sSectionValues(1), dL) Then Continue While
                      If Not Integer.TryParse(sSectionValues(2), nQty) Then Continue While
                      If sSectionValues.Count >= 4 AndAlso Integer.TryParse(sSectionValues(3), nActive) Then
@@ -179,9 +201,9 @@ Module WarehouseHelper
                   End If
                Next
             Case BWType.WALL
-               Dim dSectionH As Double = 0 : StringToDoubleAdv( SectionData(0), dSectionH)
+               Dim dSectionH As Double = 0 : StringToDoubleAdv(SectionData(0), dSectionH)
                For Each SectionProgress In SectionList
-                  If Math.Abs( SectionProgress.Section.dH - dSectionH) < 0.1 AndAlso SectionProgress.Section.sMaterial.Contains(SectionData(1)) Then
+                  If Math.Abs(SectionProgress.Section.dH - dSectionH) < 0.1 AndAlso SectionProgress.Section.sMaterial.Contains(SectionData(1)) Then
                      If Not StringToDoubleAdv(sSectionValues(1), dW) Then Continue While
                      If Not StringToDoubleAdv(sSectionValues(2), dL) Then Continue While
                      If Not Integer.TryParse(sSectionValues(3), nQty) Then Continue While

EgtBEAMWALL.sln

@@ -13,58 +13,33 @@ Project("{F184B08F-C81C-45F6-A57F-5ABD9991F28F}") = "EgtBEAMWALL.Core", "EgtBEAM
 EndProject
 Global
 	GlobalSection(SolutionConfigurationPlatforms) = preSolution
-		Debug|x64 = Debug|x64
 		Debug|x86 = Debug|x86
-		Release|x64 = Release|x64
 		Release|x86 = Release|x86
-		RemoteDebug|x64 = RemoteDebug|x64
 		RemoteDebug|x86 = RemoteDebug|x86
 	EndGlobalSection
 	GlobalSection(ProjectConfigurationPlatforms) = postSolution
-		{57291955-F9C4-4466-8D53-476D43BA3659}.Debug|x64.ActiveCfg = Debug|x64
-		{57291955-F9C4-4466-8D53-476D43BA3659}.Debug|x64.Build.0 = Debug|x64
 		{57291955-F9C4-4466-8D53-476D43BA3659}.Debug|x86.ActiveCfg = Debug|x86
 		{57291955-F9C4-4466-8D53-476D43BA3659}.Debug|x86.Build.0 = Debug|x86
-		{57291955-F9C4-4466-8D53-476D43BA3659}.Release|x64.ActiveCfg = Release|x64
-		{57291955-F9C4-4466-8D53-476D43BA3659}.Release|x64.Build.0 = Release|x64
 		{57291955-F9C4-4466-8D53-476D43BA3659}.Release|x86.ActiveCfg = Release|x86
 		{57291955-F9C4-4466-8D53-476D43BA3659}.Release|x86.Build.0 = Release|x86
-		{57291955-F9C4-4466-8D53-476D43BA3659}.RemoteDebug|x64.ActiveCfg = RemoteDebug|x64
-		{57291955-F9C4-4466-8D53-476D43BA3659}.RemoteDebug|x64.Build.0 = RemoteDebug|x64
 		{57291955-F9C4-4466-8D53-476D43BA3659}.RemoteDebug|x86.ActiveCfg = RemoteDebug|x86
 		{57291955-F9C4-4466-8D53-476D43BA3659}.RemoteDebug|x86.Build.0 = RemoteDebug|x86
-		{B71DA327-38C8-4305-BBA1-34F3F3F32405}.Debug|x64.ActiveCfg = Debug|x64
-		{B71DA327-38C8-4305-BBA1-34F3F3F32405}.Debug|x64.Build.0 = Debug|x64
 		{B71DA327-38C8-4305-BBA1-34F3F3F32405}.Debug|x86.ActiveCfg = Debug|x86
 		{B71DA327-38C8-4305-BBA1-34F3F3F32405}.Debug|x86.Build.0 = Debug|x86
-		{B71DA327-38C8-4305-BBA1-34F3F3F32405}.Release|x64.ActiveCfg = Release|x64
-		{B71DA327-38C8-4305-BBA1-34F3F3F32405}.Release|x64.Build.0 = Release|x64
 		{B71DA327-38C8-4305-BBA1-34F3F3F32405}.Release|x86.ActiveCfg = Release|x86
 		{B71DA327-38C8-4305-BBA1-34F3F3F32405}.Release|x86.Build.0 = Release|x86
-		{B71DA327-38C8-4305-BBA1-34F3F3F32405}.RemoteDebug|x64.ActiveCfg = RemoteDebug|x64
-		{B71DA327-38C8-4305-BBA1-34F3F3F32405}.RemoteDebug|x64.Build.0 = RemoteDebug|x64
 		{B71DA327-38C8-4305-BBA1-34F3F3F32405}.RemoteDebug|x86.ActiveCfg = RemoteDebug|x86
 		{B71DA327-38C8-4305-BBA1-34F3F3F32405}.RemoteDebug|x86.Build.0 = RemoteDebug|x86
-		{24D7760E-662A-47E4-B729-B70126C24A31}.Debug|x64.ActiveCfg = Debug|Any CPU
-		{24D7760E-662A-47E4-B729-B70126C24A31}.Debug|x64.Build.0 = Debug|Any CPU
 		{24D7760E-662A-47E4-B729-B70126C24A31}.Debug|x86.ActiveCfg = Debug|Any CPU
 		{24D7760E-662A-47E4-B729-B70126C24A31}.Debug|x86.Build.0 = Debug|Any CPU
-		{24D7760E-662A-47E4-B729-B70126C24A31}.Release|x64.ActiveCfg = Release|Any CPU
-		{24D7760E-662A-47E4-B729-B70126C24A31}.Release|x64.Build.0 = Release|Any CPU
 		{24D7760E-662A-47E4-B729-B70126C24A31}.Release|x86.ActiveCfg = Release|Any CPU
 		{24D7760E-662A-47E4-B729-B70126C24A31}.Release|x86.Build.0 = Release|Any CPU
-		{24D7760E-662A-47E4-B729-B70126C24A31}.RemoteDebug|x64.ActiveCfg = Release|Any CPU
 		{24D7760E-662A-47E4-B729-B70126C24A31}.RemoteDebug|x86.ActiveCfg = Release|Any CPU
 		{24D7760E-662A-47E4-B729-B70126C24A31}.RemoteDebug|x86.Build.0 = Release|Any CPU
-		{F22835A1-83D8-4334-91BB-BAAEB9CF59B1}.Debug|x64.ActiveCfg = Debug|Any CPU
-		{F22835A1-83D8-4334-91BB-BAAEB9CF59B1}.Debug|x64.Build.0 = Debug|Any CPU
 		{F22835A1-83D8-4334-91BB-BAAEB9CF59B1}.Debug|x86.ActiveCfg = Debug|Any CPU
 		{F22835A1-83D8-4334-91BB-BAAEB9CF59B1}.Debug|x86.Build.0 = Debug|Any CPU
-		{F22835A1-83D8-4334-91BB-BAAEB9CF59B1}.Release|x64.ActiveCfg = Release|Any CPU
-		{F22835A1-83D8-4334-91BB-BAAEB9CF59B1}.Release|x64.Build.0 = Release|Any CPU
 		{F22835A1-83D8-4334-91BB-BAAEB9CF59B1}.Release|x86.ActiveCfg = Release|Any CPU
 		{F22835A1-83D8-4334-91BB-BAAEB9CF59B1}.Release|x86.Build.0 = Release|Any CPU
-		{F22835A1-83D8-4334-91BB-BAAEB9CF59B1}.RemoteDebug|x64.ActiveCfg = Release|Any CPU
 		{F22835A1-83D8-4334-91BB-BAAEB9CF59B1}.RemoteDebug|x86.ActiveCfg = Release|Any CPU
 		{F22835A1-83D8-4334-91BB-BAAEB9CF59B1}.RemoteDebug|x86.Build.0 = Release|Any CPU
 	EndGlobalSection