-aggiunta gestione backup all'uscita programma

- aggiunta gestione stato durante backup e restore

EgtBEAMWALL.Core/BTLModel/BTLFeatureM.vb

@@ -90,6 +90,16 @@ Public Class BTLFeatureM
       End Set
    End Property
 
+   Protected m_nPriority As Integer = 0
+   Public Overridable Property nPriority As Integer
+      Get
+         Return m_nPriority
+      End Get
+      Set(value As Integer)
+         m_nPriority = value
+      End Set
+   End Property
+
    ' Nome
    Protected m_sName As String
    Public ReadOnly Property sName As String
@@ -244,10 +254,11 @@ Public Class BTLFeatureM
       Dim NewBTLFeature As New BTLFeatureM
       NewBTLFeature.m_ParentPart = ParentPart
       NewBTLFeature.m_nFeatureId = nFeatureId
-      ' leggo gruppo, numero feature e lato
+      ' leggo gruppo, numero feature, lato e priorità
       EgtGetInfo(nFeatureId, BTL_FTR_GRP, NewBTLFeature.m_nSelGRP)
       EgtGetInfo(nFeatureId, BTL_FTR_PRC, NewBTLFeature.m_nPRC)
       EgtGetInfo(nFeatureId, BTL_FTR_SIDE, NewBTLFeature.m_nSelSIDE)
+      EgtGetInfo(nFeatureId, BTL_FTR_PRIORITY, NewBTLFeature.m_nPRIORITY)
       Dim nDO As Integer = 1
       If EgtGetInfo(nFeatureId, BTL_FTR_DO, nDO) Then
          NewBTLFeature.m_bDO = (nDO <> 0)
@@ -309,6 +320,7 @@ Public Class BTLFeatureM
       NewBTLFeature.m_nPRC = nPRC
       NewBTLFeature.m_nSelGRP = nGRP
       NewBTLFeature.m_nSelSIDE = nSIDE
+      NewBTLFeature.m_nPriority = 0
       NewBTLFeature.m_bDO = True
       ' crea parametri per questa feature da file ini
       NewBTLFeature.CreateFeatureParams(NewBTLFeature)
@@ -533,6 +545,7 @@ Public Class BTLFeatureM
          For Each QPar In QBTLParamMList
             If QPar.bCustom Then EgtSetInfo(nFeatureId, QPar.sName & "A", 1)
          Next
+         EgtSetInfo( nFeatureId, BTL_FTR_PRIORITY, nPriority)
          SetFeatureId(nFeatureId)
          ' imposto modificato per copie
          EgtDuploSetModified(ParentPart.nPartId)

EgtBEAMWALL.Core/BTLModel/BTLPartM.vb

@@ -797,15 +797,15 @@ Public Class BTLPartM
          Dim vtVersY As New Vector3d
          sValArray = sValue.Split({","}, StringSplitOptions.RemoveEmptyEntries)
          If sValArray.Count() >= 9 Then
-            StringToLen(sValArray(0), ptOri.x)
-            StringToLen(sValArray(1), ptOri.y)
-            StringToLen(sValArray(2), ptOri.z)
-            StringToDouble(sValArray(3), vtVersX.x)
-            StringToDouble(sValArray(4), vtVersX.y)
-            StringToDouble(sValArray(5), vtVersX.z)
-            StringToDouble(sValArray(6), vtVersY.x)
-            StringToDouble(sValArray(7), vtVersY.y)
-            StringToDouble(sValArray(8), vtVersY.z)
+            StringToLenAdv(sValArray(0), ptOri.x)
+            StringToLenAdv(sValArray(1), ptOri.y)
+            StringToLenAdv(sValArray(2), ptOri.z)
+            StringToDoubleAdv(sValArray(3), vtVersX.x)
+            StringToDoubleAdv(sValArray(4), vtVersX.y)
+            StringToDoubleAdv(sValArray(5), vtVersX.z)
+            StringToDoubleAdv(sValArray(6), vtVersY.x)
+            StringToDoubleAdv(sValArray(7), vtVersY.y)
+            StringToDoubleAdv(sValArray(8), vtVersY.z)
             NewBTLPart.m_refTransf.ChangeOrigin(ptOri)
             NewBTLPart.m_refTransf.Setup(ptOri, ptOri + vtVersX, ptOri + vtVersY)
          End If
@@ -815,10 +815,10 @@ Public Class BTLPartM
       EgtGetInfo(nPartId, BTL_PRT_CAMBER, sValue)
       sValArray = sValue.Split(New String() {":", "P"}, StringSplitOptions.RemoveEmptyEntries)
       If sValArray.Count() >= 10 Then
-         StringToLen(sValArray(3), NewBTLPart.m_dCamberLen1)
-         StringToLen(sValArray(5), NewBTLPart.m_dCamberLen2)
-         StringToLen(sValArray(7), NewBTLPart.m_dCamberLen3)
-         StringToLen(sValArray(9), NewBTLPart.m_dCamberCross3)
+         StringToLenAdv(sValArray(3), NewBTLPart.m_dCamberLen1)
+         StringToLenAdv(sValArray(5), NewBTLPart.m_dCamberLen2)
+         StringToLenAdv(sValArray(7), NewBTLPart.m_dCamberLen3)
+         StringToLenAdv(sValArray(9), NewBTLPart.m_dCamberCross3)
       End If
       Dim pFrom As Integer = sValue.IndexOf("SIDE: ") + "SIDE: ".Length
       Dim pTo As Integer = sValue.LastIndexOf(" P01")
@@ -830,10 +830,10 @@ Public Class BTLPartM
       EgtGetInfo(nPartId, BTL_PRT_PARTOFFSET, sValue)
       sValArray = sValue.Split(New String() {":", "P"}, StringSplitOptions.RemoveEmptyEntries)
       If sValArray.Count() >= 10 Then
-         StringToLen(sValArray(3), NewBTLPart.m_dPartOffsetSide1)
-         StringToLen(sValArray(5), NewBTLPart.m_dPartOffsetSide2)
-         StringToLen(sValArray(7), NewBTLPart.m_dPartOffsetSide3)
-         StringToLen(sValArray(9), NewBTLPart.m_dPartOffsetSide4)
+         StringToLenAdv(sValArray(3), NewBTLPart.m_dPartOffsetSide1)
+         StringToLenAdv(sValArray(5), NewBTLPart.m_dPartOffsetSide2)
+         StringToLenAdv(sValArray(7), NewBTLPart.m_dPartOffsetSide3)
+         StringToLenAdv(sValArray(9), NewBTLPart.m_dPartOffsetSide4)
       End If
       pFrom = sValue.IndexOf("P04: ") + "P04: ".Length
       pTo = sValue.LastIndexOf(" P11")
@@ -883,9 +883,9 @@ Public Class BTLPartM
       NewBTLPart.m_refGrainDir = New Vector3d
       sValArray = sValue.Split(New String() {",", ";"}, StringSplitOptions.RemoveEmptyEntries)
       If sValArray.Count() >= 4 Then
-         StringToDouble(sValArray(0), NewBTLPart.m_refGrainDir.x)
-         StringToDouble(sValArray(1), NewBTLPart.m_refGrainDir.y)
-         StringToDouble(sValArray(2), NewBTLPart.m_refGrainDir.z)
+         StringToDoubleAdv(sValArray(0), NewBTLPart.m_refGrainDir.x)
+         StringToDoubleAdv(sValArray(1), NewBTLPart.m_refGrainDir.y)
+         StringToDoubleAdv(sValArray(2), NewBTLPart.m_refGrainDir.z)
          NewBTLPart.m_bGRAINDIRALIGN = (CInt(sValArray(3)) = 1)
       End If
 
@@ -1044,15 +1044,15 @@ Public Class BTLPartM
    '      Dim vtVersY As New Vector3d
    '      sValArray = sValue.Split({","}, StringSplitOptions.RemoveEmptyEntries)
    '      If sValArray.Count() >= 9 Then
-   '         StringToLen(sValArray(0), ptOri.x)
-   '         StringToLen(sValArray(1), ptOri.y)
-   '         StringToLen(sValArray(2), ptOri.z)
-   '         StringToDouble(sValArray(3), vtVersX.x)
-   '         StringToDouble(sValArray(4), vtVersX.y)
-   '         StringToDouble(sValArray(5), vtVersX.z)
-   '         StringToDouble(sValArray(6), vtVersY.x)
-   '         StringToDouble(sValArray(7), vtVersY.y)
-   '         StringToDouble(sValArray(8), vtVersY.z)
+   '         StringToLenAdv(sValArray(0), ptOri.x)
+   '         StringToLenAdv(sValArray(1), ptOri.y)
+   '         StringToLenAdv(sValArray(2), ptOri.z)
+   '         StringToDoubleAdv(sValArray(3), vtVersX.x)
+   '         StringToDoubleAdv(sValArray(4), vtVersX.y)
+   '         StringToDoubleAdv(sValArray(5), vtVersX.z)
+   '         StringToDoubleAdv(sValArray(6), vtVersY.x)
+   '         StringToDoubleAdv(sValArray(7), vtVersY.y)
+   '         StringToDoubleAdv(sValArray(8), vtVersY.z)
    '         m_refTransf.ChangeOrigin(ptOri)
    '         m_refTransf.Setup(ptOri, ptOri + vtVersX, ptOri + vtVersY)
    '      End If
@@ -1063,10 +1063,10 @@ Public Class BTLPartM
    '   EgtGetInfo(nPartId, BTL_PRT_CAMBER, sValue)
    '   sValArray = sValue.Split(New String() {": ", " P"}, StringSplitOptions.RemoveEmptyEntries)
    '   If sValArray.Count() >= 5 Then
-   '      StringToLen(sValArray(3), m_dCamberLen1)
-   '      StringToLen(sValArray(5), m_dCamberLen2)
-   '      StringToLen(sValArray(7), m_dCamberLen3)
-   '      StringToLen(sValArray(9), m_dCamberCross3)
+   '      StringToLenAdv(sValArray(3), m_dCamberLen1)
+   '      StringToLenAdv(sValArray(5), m_dCamberLen2)
+   '      StringToLenAdv(sValArray(7), m_dCamberLen3)
+   '      StringToLenAdv(sValArray(9), m_dCamberCross3)
    '   End If
    '   Dim pFrom As Integer = sValue.IndexOf("SIDE: ") + "SIDE: ".Length
    '   Dim pTo As Integer = sValue.LastIndexOf(" P01")
@@ -1078,10 +1078,10 @@ Public Class BTLPartM
    '   EgtGetInfo(nPartId, BTL_PRT_PARTOFFSET, sValue)
    '   sValArray = sValue.Split(New String() {": ", " P"}, StringSplitOptions.RemoveEmptyEntries)
    '   If sValArray.Count() >= 5 Then
-   '      StringToLen(sValArray(3), m_dPartOffsetSide1)
-   '      StringToLen(sValArray(5), m_dPartOffsetSide2)
-   '      StringToLen(sValArray(7), m_dPartOffsetSide3)
-   '      StringToLen(sValArray(9), m_dPartOffsetSide4)
+   '      StringToLenAdv(sValArray(3), m_dPartOffsetSide1)
+   '      StringToLenAdv(sValArray(5), m_dPartOffsetSide2)
+   '      StringToLenAdv(sValArray(7), m_dPartOffsetSide3)
+   '      StringToLenAdv(sValArray(9), m_dPartOffsetSide4)
    '   End If
    '   pFrom = sValue.IndexOf("P04: ") + "P04: ".Length
    '   pTo = sValue.LastIndexOf(" P11")
@@ -1105,9 +1105,9 @@ Public Class BTLPartM
    '   m_refGrainDir = New Vector3d
    '   sValArray = sValue.Split(New String() {",", ";"}, StringSplitOptions.RemoveEmptyEntries)
    '   If sValArray.Count() >= 4 Then
-   '      StringToDouble(sValArray(0), m_refGrainDir.x)
-   '      StringToDouble(sValArray(1), m_refGrainDir.y)
-   '      StringToDouble(sValArray(2), m_refGrainDir.z)
+   '      StringToDoubleAdv(sValArray(0), m_refGrainDir.x)
+   '      StringToDoubleAdv(sValArray(1), m_refGrainDir.y)
+   '      StringToDoubleAdv(sValArray(2), m_refGrainDir.z)
    '      m_bGRAINDIRALIGN = (CInt(sValArray(3)) = 1)
    '   End If
 

EgtBEAMWALL.Core/Constants/ConstBeam.vb

@@ -175,8 +175,10 @@
    Public Const BTL_PRT_REFSIDE = "REFERENCESIDE"
    Public Const BTL_PRT_ALIGNMENT = "ALIGNMENT"
    Public Const BTL_PRT_MATERIALTYPE = "MATERIALTYPE"
+   Public Const BTL_PRT_DESCRIPTION = "NAM"
 
    ' parametri generici
+   Public Const BTL_GEN_BTLPATH = "BTL"
    Public Const BTL_GEN_PROJNUM = "PROJECTNUMBER"
    Public Const BTL_GEN_PROJNAME = "PROJECTNAME"
    Public Const BTL_GEN_PROJPART = "PROJECTPART"
@@ -204,6 +206,7 @@
    Public Const BTL_FTR_PRC As String = "PRC"
    Public Const BTL_FTR_DO As String = "DO"
    Public Const BTL_FTR_SIDE As String = "SIDE"
+   Public Const BTL_FTR_PRIORITY As String = "PRIORITY"
    Public Const BTL_FTR_NAME As String = "NAME"
    Public Const BTL_FTR_DES As String = "DES"
    Public Const BTL_FTR_PRID As String = "PRID"
@@ -299,6 +302,8 @@
    Public Const BTLFILENAME As String = "BTLFILENAME"
    Public Const EXP_PART As String = "ImportExport"
    Public Const EXP_MACHINE As String = "Machine"
+   ' parametro che indica se il progetto e' stato appena importato e quindi bisogna riverificare i MachGroup
+   Public Const IMP_VERIFYMACHGROUP As String = "VerifyMachGroup"
 
    ' parametri modifica percorsi free contour
    Public Const PATH_SIDEANGLAYER As String = "SideAngLayer"

EgtBEAMWALL.Core/Constants/ConstColumns.vb

@@ -16,5 +16,6 @@
    Public Const COL_TYPE As String = "colTYPE"
    Public Const COL_DESCRIPTION As String = "colDESCRIPTION"
    Public Const COL_SUPERVISORID As String = "colSUPERVISORID"
+   Public Const COL_PRIORITY As String = "colPRIORITY"
 
 End Module

EgtBEAMWALL.Core/Constants/ConstGen.vb

@@ -21,6 +21,7 @@ Public Module ConstGen
    ' File con dati di licenza
    Public Const LIC_FILE_NAME As String = "EgtBEAMWALL.lic"
    Public Const S_LICENCE As String = "Licence"
+   Public Const K_LOCKID As String = "LockId"
    Public Const K_KEY As String = "Key"
    Public Const K_NESTKEY As String = "NestKey"
 

EgtBEAMWALL.Core/Constants/ConstIni.vb

@@ -20,6 +20,7 @@ Public Module ConstIni
    'Public Const K_LICENCE As String = "Licence"
    'Public Const K_USERLEVEL As String = "UserLevel"
    'Public Const K_MAXINST As String = "MaxInstances"
+   Public Const K_NETKEY As String = "NetKey"
    Public Const K_MAXCAMINST As String = "MaxCamInstances"
    Public Const K_VIEWOPTIM_INSTANCES As String = "ViewOptimInstances"
    Public Const K_SUPERVISOR_INSTANCES As String = "SupervisorInstances"
@@ -44,6 +45,7 @@ Public Module ConstIni
    Public Const K_DATADIR As String = "DataDir"
    Public Const K_ENABLEEDIT As String = "EnableEdit"
    Public Const K_FASTPRODUCE As String = "FastProduce"
+   Public Const K_ADDPROJ As String = "AddProj"
 
    'Public Const S_LANGUAGES As String = "Languages"
    'Public Const K_LANGUAGE As String = "Language"
@@ -94,6 +96,7 @@ Public Module ConstIni
    Public Const S_IMPORT As String = "Import"
    Public Const K_BTLFLAG As String = "BtlFlag"
    Public Const K_WALLBTLFLAG As String = "WallBtlFlag"
+   Public Const K_WALLOPPOSITESIDENESTING As String = "WallOppositeSideNesting"
 
    'Public Const S_MACH As String = "Mach"
    'Public Const K_MACHINESDIR As String = "MachinesDir"
@@ -102,6 +105,7 @@ Public Module ConstIni
    Public Const K_SUPERVISORMACH As String = "SupervisorMach"
    Public Const K_PASSWORD As String = "Password"
    Public Const K_CHANGEMACH As String = "ChangeMach"
+   Public Const K_EXPORTBWE As String = "ExpBwe"
 
    'Public Const S_SIMUL As String = "Simul"
    'Public Const K_SLIDERX As String = "SliderX"
@@ -116,6 +120,15 @@ Public Module ConstIni
    Public Const K_WALLBASEDIR As String = "BaseDir"
    Public Const K_WALLBWEEXEC As String = "BweExec"
 
+   Public Const S_MACHINELOGFILTER As String = "MachineLogFilters"
+   Public Const K_PARTEVENTTYPE As String = "PartEventType"
+   Public Const K_ENTITYTYPE As String = "EntityType"
+   Public Const K_DAYTYPE As String = "DayType"
+   Public Const K_STARTDATE As String = "StartDate"
+   Public Const K_ENDDATE As String = "EndDate"
+
+   Public Const S_OPENFILEDIALOG As String = "OpenFileDialog"
+
    'Public Const S_NEST As String = "Nest"
    Public Const K_NESTEXEC As String = "NestExec"
    Public Const K_FLIPROT As String = "FlipRot"
@@ -148,4 +161,9 @@ Public Module ConstIni
    Public Const K_TYPE As String = "Type"
    Public Const K_DEFAULTQUANTITY As String = "DefaultQuantity"
 
+   Public Const S_BACKUPANDRESTORE As String = "Backup&Restore"
+   Public Const K_EXTERNALBACKUPACTIVE As String = "ExternalBackupActive"
+   Public Const K_EXTERNALFILEPATH As String = "ExternalFilePath"
+   Public Const K_REMINDERFREQUENCY As String = "ReminderFrequency"
+
 End Module

EgtBEAMWALL.Core/EgtDataGrid/DataGridColumnsIniFile.vb

@@ -28,7 +28,7 @@ Public Module DataGridColumnsIniFile
             Dim bIsReadOnly As Boolean = sColumnParams(4).Equals("1")
             Dim Width As Double
             Dim WidthType As DataGridLengthUnitType
-            StringToDouble(sColumnParams(5), Width)
+            StringToDoubleAdv(sColumnParams(5), Width)
             Integer.TryParse(sColumnParams(6), WidthType)
             Dim bVisible As Boolean = sColumnParams(7).Equals("1")
             Dim bCanUserEditVisible As Boolean = sColumnParams(8).Equals("1")
@@ -65,7 +65,7 @@ Public Module DataGridColumnsIniFile
                Dim bIsReadOnly As Boolean = sColumnParams(4).Equals("1")
                Dim Width As Double
                Dim WidthType As DataGridLengthUnitType
-               StringToDouble(sColumnParams(5), Width)
+               StringToDoubleAdv(sColumnParams(5), Width)
                Integer.TryParse(sColumnParams(6), WidthType)
                Dim bVisible As Boolean = sColumnParams(7).Equals("1")
                Dim bCanUserEditVisible As Boolean = sColumnParams(8).Equals("1")

EgtBEAMWALL.Core/EgtDataGrid/EgtDataGrid.xaml.vb

@@ -424,6 +424,7 @@ Public Class EgtDataGridColumn
       End Set
    End Property
 
+   Private Property m_OrigIsReadOnly As Boolean = True
    Private Property m_IsReadOnly As Boolean = True
    Public Property IsReadOnly As Boolean
       Get
@@ -437,6 +438,9 @@ Public Class EgtDataGridColumn
          End If
       End Set
    End Property
+   Public Sub ResetToOrigIsReadOnly()
+      IsReadOnly = m_OrigIsReadOnly
+   End Sub
 
    Friend OldCanUserReorder As Boolean?
    Private m_CanUserReorder As Boolean
@@ -561,6 +565,7 @@ Public Class EgtDataGridColumn
       m_CanUserReorder = bCanUserReorder
       m_CanUserResize = bCanUserResize
       m_CanUserSort = bCanUserSort
+      m_OrigIsReadOnly = bIsReadOnly
       m_IsReadOnly = bIsReadOnly
       m_Width = Width
       m_Visible = bVisible
@@ -588,7 +593,7 @@ Public Class EgtDataGridColumn
    Public Function SaveDataGridColumn() As Boolean
       Dim bOk As Boolean
       Dim sColumnParams = String.Empty
-      sColumnParams = Name & "," & If(CanUserReorder, 1, 0) & "," & If(CanUserResize, 1, 0) & "," & If(CanUserSort, 1, 0) & "," & If(IsReadOnly, 1, 0) & "," & DoubleToString(Width.Value, 6) & "," & Width.UnitType & "," & If(Visible, 1, 0) & "," & If(CanUserEditVisible, 1, 0) & "," & CInt(SortDirection)
+      sColumnParams = Name & "," & If(CanUserReorder, 1, 0) & "," & If(CanUserResize, 1, 0) & "," & If(CanUserSort, 1, 0) & "," & If(m_OrigIsReadOnly, 1, 0) & "," & DoubleToString(Width.Value, 6) & "," & Width.UnitType & "," & If(Visible, 1, 0) & "," & If(CanUserEditVisible, 1, 0) & "," & CInt(SortDirection)
       bOk = WriteColumnPrivateProfileParam(ParentDataGridName, DisplayIndex, sColumnParams)
       Return bOk
    End Function

EgtBEAMWALL.Core/LoadingWnd/LoadingWndHelper.vb

@@ -16,6 +16,8 @@ Public Module LoadingWndHelper
       CHANGEPARAM = 10
       CREATINGPDF = 11
       CHANGEMATERIAL = 12
+      BACKUP = 13
+      RESTORE = 14
    End Enum
 
    Dim m_MainWindow As Windows.Window

EgtBEAMWALL.Core/MachGroupModel/MyMachGroupM.vb

@@ -420,7 +420,7 @@ Public Class MyMachGroupM
          EgtGetInfo(Id, MGR_RPT_PART & 1, sInfo)
          If Not String.IsNullOrWhiteSpace(sInfo) Then
             sSplitInfo = sInfo.Split(","c)
-            StringToDouble(sSplitInfo(1), m_dStartCut)
+            StringToDoubleAdv(sSplitInfo(1), m_dStartCut)
          Else
             m_dStartCut = 0
          End If

EgtBEAMWALL.Core/MachGroupModel/PartM.vb

@@ -508,7 +508,7 @@ Public Class PartM
             Index += 1
          End While
          If bFound Then
-            StringToDouble(sSplitInfo(1), NewPartM.m_dPOSX)
+            StringToDoubleAdv(sSplitInfo(1), NewPartM.m_dPOSX)
          End If
       Else
          ' leggo PosX, PosY, Rot e Flip

EgtBEAMWALL.Core/MachGroupPanel/MyMachGroupVM.vb

@@ -169,7 +169,7 @@ Public MustInherit Class MyMachGroupVM
          Return LenToString(MyMachGroupM.dStartCut, 3)
       End Get
       Set(value As String)
-         StringToLen(value, MyMachGroupM.dStartCut)
+         StringToLenAdv(value, MyMachGroupM.dStartCut, True)
       End Set
    End Property
    Public Property dStartCut As Double
@@ -632,13 +632,17 @@ Public MustInherit Class MyMachGroupVM
    Public ReadOnly Property DeleteMachGroup_Command As ICommand
       Get
          If m_cmdDeleteMachGroup Is Nothing Then
-            m_cmdDeleteMachGroup = New Command(AddressOf DeleteMachGroup)
+            m_cmdDeleteMachGroup = New Command(AddressOf DeleteMachGroupCmd)
          End If
          Return m_cmdDeleteMachGroup
       End Get
    End Property
 
-   Public Overridable Sub DeleteMachGroup()
+   Public Sub DeleteMachGroupCmd()
+      DeleteMachGroup()
+   End Sub
+
+   Public Overridable Sub DeleteMachGroup(Optional bMultipleCommand As Boolean = False)
       ' elimino tutte le copie
       Dim nRawPartId As Integer = EgtGetFirstRawPart()
       Dim nBeamId As Integer = EgtGetFirstPartInRawPart(nRawPartId)

EgtBEAMWALL.Core/MachGroupPanel/PartVM.vb

@@ -107,7 +107,7 @@ Public MustInherit Class PartVM
          Return LenToString(m_PartM.dPOSX, 3)
       End Get
       Set(value As String)
-         StringToLen(value, m_PartM.dPOSX)
+         StringToLenAdv(value, m_PartM.dPOSX, True)
       End Set
    End Property
    Public Property dPOSX As Double
@@ -217,7 +217,7 @@ Public MustInherit Class PartVM
          Return LenToString(m_PartM.dOffset, 3)
       End Get
       Set(value As String)
-         StringToLen(value, m_PartM.dOffset)
+         StringToLenAdv(value, m_PartM.dOffset, True)
       End Set
    End Property
    Public ReadOnly Property dOffset As Double
@@ -235,7 +235,7 @@ Public MustInherit Class PartVM
          Return LenToString(m_PartM.dPOSY, 3)
       End Get
       Set(value As String)
-         StringToLen(value, m_PartM.dPOSY)
+         StringToLenAdv(value, m_PartM.dPOSY, True)
       End Set
    End Property
 
@@ -250,7 +250,7 @@ Public MustInherit Class PartVM
          Return LenToString(m_PartM.dROT, 3) & "°"
       End Get
       Set(value As String)
-         StringToLen(value, m_PartM.dROT)
+         StringToLenAdv(value, m_PartM.dROT, True)
       End Set
    End Property
 

EgtBEAMWALL.Core/My Project/AssemblyInfo.vb

@@ -16,7 +16,7 @@ Imports System.Runtime.InteropServices
 <Assembly: AssemblyDescription("")>
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("EgtBEAMWALL.Core")>
-<Assembly: AssemblyCopyright("Copyright ©  2020-2022 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2020-2023 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 
 <Assembly: ComVisible(False)>
@@ -35,5 +35,5 @@ Imports System.Runtime.InteropServices
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.4.11.3")>
-<Assembly: AssemblyFileVersion("2.4.11.3")>
+<Assembly: AssemblyVersion("2.5.6.2")>
+<Assembly: AssemblyFileVersion("2.5.6.2")>

EgtBEAMWALL.Core/OpenProjectFileDialog/OpenProjectFileDialogV.xaml

@@ -5,9 +5,9 @@
                             xmlns:EgtBEAMWALL="clr-namespace:EgtBEAMWALL.Core"
                             Title="{Binding Title}"
                             Style="{DynamicResource {x:Type EgtWPFLib5:EgtCustomWindow}}"
-                            WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="False"
+                            WindowStyle="None" ResizeMode="NoResize" TitleBarHeight="30" IsResizable="True"
                             IsMinimizable="False" WindowStartupLocation="CenterScreen" ShowInTaskbar="False"
-                            Height="500" Width="500" Topmost="True"
+                            MinHeight="500" MinWidth="500" Topmost="True"
                             DataContext="{Binding RelativeSource={RelativeSource Self}}">
 
    <EgtWPFLib5:EgtCustomWindow.Resources>
@@ -21,42 +21,105 @@
          <RowDefinition Height="1*"/>
       </Grid.RowDefinitions>
 
-        <StackPanel>
-            <Grid Grid.Row="0" Margin="5">
-                <Grid.RowDefinitions>
-                    <RowDefinition Height="1*" />
-                    <RowDefinition Height="1*" />
-                </Grid.RowDefinitions>
-                <Grid.ColumnDefinitions>
-                    <ColumnDefinition Width="1*" />
-                    <ColumnDefinition Width="1*" />
-                </Grid.ColumnDefinitions>
+      <GroupBox Header="Filters"
+                Margin="5">
+         <Grid>
+            <Grid.RowDefinitions>
+               <RowDefinition Height="Auto"/>
+               <RowDefinition Height="Auto"/>
+            </Grid.RowDefinitions>
+            <Grid>
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="Auto"/>
+                  <ColumnDefinition Width="1*"/>
+               </Grid.ColumnDefinitions>
+               <ComboBox ItemsSource="{Binding BTLDateTypeList}"
+                         SelectedIndex="{Binding SelBTLDateType}"
+                         Width="105"
+                         Margin="5"
+                         Style="{StaticResource FeatureComboBox}"/>
+               <StackPanel Grid.Column="1" Orientation="Horizontal">
+                  <ComboBox ItemsSource="{Binding DayTypeList}"
+                            SelectedIndex="{Binding SelDayType}"
+                            Width="105"
+                            Margin="0,0,2.5,0"
+                            Style="{StaticResource PartParam_ComboBox}"/>
+                  <StackPanel Orientation="Horizontal" Visibility="{Binding Date_Visibility}">
+                     <TextBlock Text="{Binding From_Msg}"
+                                Style="{StaticResource Filter_TextBlock}"/>
+                     <DatePicker SelectedDate="{Binding dtStartDate}"
+                                 Style="{StaticResource Filter_DatePicker}"/>
+                     <TextBlock Text="{Binding To_Msg}"
+                                Style="{StaticResource Filter_TextBlock}"/>
+                     <DatePicker SelectedDate="{Binding dtEndDate}"
+                                 Style="{StaticResource Filter_DatePicker}"/>
+                  </StackPanel>
+               </StackPanel>
+            </Grid>
+            <Grid Grid.Row="1">
+               <Grid.ColumnDefinitions>
+                  <ColumnDefinition Width="Auto"/>
+                  <ColumnDefinition Width="1*"/>
+                  <ColumnDefinition Width="Auto"/>
+               </Grid.ColumnDefinitions>
+               <ComboBox ItemsSource="{Binding FilterTypeList}"
+                         SelectedItem="{Binding SelFilterType}"
+                         Width="105"
+                         Margin="5"
+                         Style="{StaticResource FeatureComboBox}"/>
+               <EgtWPFLib5:EgtTextBox Grid.Column="1"
+                                      Text="{Binding SearchText}"
+                                      Margin="5"
+                                      Visibility="{Binding SearchText_Visibility}"/>
+               <StackPanel Grid.Column="2" 
+                           Orientation="Horizontal">
+                  <TextBlock Text="Rows"
+                             Style="{StaticResource OptionTextBlock}"/>
+                  <ComboBox ItemsSource="{Binding RowQuantityList}"
+                            SelectedIndex="{Binding SelRowQuantity}"
+                            Style="{StaticResource FeatureComboBox}"/>
+               </StackPanel>
+            </Grid>
+         </Grid>
+      </GroupBox>
 
-                <TextBlock Text="{Binding FilterType_Msg}"
+
+      <!--<StackPanel>
+         <Grid Grid.Row="0" Margin="5">
+            <Grid.RowDefinitions>
+               <RowDefinition Height="1*" />
+               <RowDefinition Height="1*" />
+            </Grid.RowDefinitions>
+            <Grid.ColumnDefinitions>
+               <ColumnDefinition Width="1*" />
+               <ColumnDefinition Width="1*" />
+            </Grid.ColumnDefinitions>
+
+            <TextBlock Text="{Binding FilterType_Msg}"
                            Grid.Row="0" Grid.Column="0"
                            Style="{StaticResource OptionTextBlock}"/>
-                <ComboBox ItemsSource="{Binding SearchColumnList}"
+            <ComboBox ItemsSource="{Binding SearchColumnList}"
                           SelectedItem="{Binding SelSearchColumn}"
                           Width="Auto"
                           Margin="5"
                           Grid.Row="0" Grid.Column="1"
                           Style="{StaticResource FeatureComboBox}"/>
-                <TextBlock Text="{Binding Search_Msg}"
+            <TextBlock Text="{Binding Search_Msg}"
                            Margin="0,5,0,0"
                            Grid.Row="1" Grid.Column="0"
                            Style="{StaticResource OptionTextBlock}"/>
-                <EgtWPFLib5:EgtTextBox Text="{Binding SearchText}"
+            <EgtWPFLib5:EgtTextBox Text="{Binding SearchText}"
                                        Margin="5"
                                        Grid.Row="1" Grid.Column="1"
                                        Visibility="{Binding SearchText_Visibility}"/>
-                <Calendar SelectedDatesChanged="Calendar_SelectedDatesChanged"
+            <Calendar SelectedDatesChanged="Calendar_SelectedDatesChanged"
                           SelectionMode="MultipleRange" 
                           Grid.Row="1" Grid.Column="1"
                           Visibility="{Binding SearchDate_Visibility}"/>
-            </Grid>
-        </StackPanel>
+         </Grid>
+      </StackPanel>-->
 
-        <EgtBEAMWALL:EgtDataGrid Grid.Row="1"
+      <EgtBEAMWALL:EgtDataGrid Grid.Row="1"
                ItemsSource="{Binding ProjectList}" 
                SelectedItem="{Binding SelProject}"
                CanUserAddRows="False"
@@ -85,6 +148,14 @@
                   </DataTemplate>
                </DataGridTextColumn.HeaderTemplate>
             </DataGridTextColumn>
+            <!-- Project Name -->
+            <DataGridTextColumn x:Key="colPROJNAME" Binding="{Binding sDescription}">
+               <DataGridTextColumn.HeaderTemplate>
+                  <DataTemplate>
+                     <TextBlock Text="{Binding Path=DataContext.BTLFileName_Msg,RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:OpenProjectFileDialogV}}}"/>
+                  </DataTemplate>
+               </DataGridTextColumn.HeaderTemplate>
+            </DataGridTextColumn>
             <!-- BTL FileName -->
             <DataGridTextColumn x:Key="colBTLNAME" Binding="{Binding sBTLFileName}">
                <DataGridTextColumn.HeaderTemplate>

EgtBEAMWALL.Core/OpenProjectFileDialog/OpenProjectFileDialogV.xaml.vb

@@ -5,6 +5,8 @@ Imports System.Windows.Controls
 Imports System.Windows.Input
 Imports EgtBEAMWALL.Core.ConstBeam
 Imports EgtUILib
+Imports EgtWPFLib5
+Imports EgtBEAMWALL
 
 Public Class OpenProjectFileDialogV
 
@@ -19,6 +21,8 @@ Public Class OpenProjectFileDialogV
       Me.DataContext = OpenProjFileDialogVM
       ' Assegno al riferimento locale al VM il VM preso dal DataContext
       m_OpenProjFileDialogVM = OpenProjFileDialogVM
+      AddHandler Me.Loaded, AddressOf OpenProjectFileDialog_Loaded
+      AddHandler Me.Closing, AddressOf OpenProjectFileDialog_Closing
    End Sub
 
 #End Region    ' CONSTRUCTOR
@@ -42,6 +46,20 @@ Public Class OpenProjectFileDialogV
       Return Me.ShowDialog()
    End Function
 
+   Private Sub OpenProjectFileDialog_Loaded(sender As Object, e As RoutedEventArgs)
+      ' Carico e imposto posizione finestra
+      WinPosFromIniToWindow(S_OPENFILEDIALOG, K_VIEWOPTIMWINPLACE, Me)
+   End Sub
+
+   Private Sub OpenProjectFileDialog_Closing(sender As Object, e As System.ComponentModel.CancelEventArgs)
+      If (Keyboard.Modifiers And ModifierKeys.Alt) = ModifierKeys.Alt OrElse Keyboard.IsKeyDown(Key.F4) Then
+         e.Cancel = True
+         Return
+      End If
+      ' Salvo posizione finestra (se non minimizzata)
+      WinPosFromWindowToIni(Me, S_OPENFILEDIALOG, K_VIEWOPTIMWINPLACE)
+   End Sub
+
 #End Region    ' METHODS
 
 #Region "EVENTS"
@@ -60,10 +78,4 @@ Public Class OpenProjectFileDialogV
       Me.DialogResult = bDialogResult
    End Sub
 
-   Private Sub Calendar_SelectedDatesChanged(sender As Object, e As SelectionChangedEventArgs)
-      Dim cal As System.Windows.Controls.Calendar = sender
-      m_OpenProjFileDialogVM.m_SearchDate = cal.SelectedDates
-      m_OpenProjFileDialogVM.m_ProjectList_View.Refresh()
-   End Sub
-
 End Class

EgtBEAMWALL.Core/OpenProjectFileDialog/OpenProjectFileDialogVM.vb

@@ -14,6 +14,32 @@ Public MustInherit Class OpenProjectFileDialogVM
 
 #Region "FIELDS & PROPERTIES"
 
+   Public Enum BTLDateTypes As Integer
+      CREATEDATE = 0
+      EXPORTDATE = 1
+   End Enum
+
+   Private Enum FilterTypes As Integer
+      NULL = 0
+      ID = 1
+      BTLFILENAME = 2
+      LISTNAME = 3
+      MACHINE = 4
+   End Enum
+
+   Public Enum DayTypes As Integer
+      LASTMONTH = 0
+      LAST3MONTHS = 1
+      LAST6MONTHS = 2
+      PERIOD = 3
+   End Enum
+
+   Public Enum RowQuantities As Integer
+      FIFTY = 0
+      HUNDRED = 1
+      HUNDREDANDFIFTY = 2
+   End Enum
+
    Friend Event m_CloseWindow(bDialogResult As Boolean)
 
    Protected m_ProjectColumns As New ObservableCollection(Of EgtDataGridColumn)
@@ -83,18 +109,131 @@ Public MustInherit Class OpenProjectFileDialogVM
       End Set
    End Property
 
-   ' lista campi per ricerca testuale e con datepicker
-   Protected m_SearchColumnList As New ObservableCollection(Of IdNameStruct)
-   Public ReadOnly Property SearchColumnList As ObservableCollection(Of IdNameStruct)
+   Protected m_BTLDateTypeList As New List(Of String)
+   Public ReadOnly Property BTLDateTypeList As List(Of String)
       Get
-         Return m_SearchColumnList
+         Return m_BTLDateTypeList
       End Get
    End Property
 
-   Protected m_SelSearchColumn As IdNameStruct = Nothing
-   Public Property SelSearchColumn As IdNameStruct
+   Protected m_SelBTLDateType As BTLDateTypes = Nothing
+   Public Property SelBTLDateType As Integer
       Get
-         Return m_SelSearchColumn
+         Return m_SelBTLDateType
+      End Get
+      Set(value As Integer)
+         ' aggiorno lista da Db
+         RefreshProjectList()
+         m_ProjectList_View.Refresh()
+      End Set
+   End Property
+
+
+   Private m_DayTypeList As New List(Of String)({"Last Month", "Last 3 Months", "Last 6 Months", EgtMsg(62531)})
+   Public ReadOnly Property DayTypeList As List(Of String)
+      Get
+         Return m_DayTypeList
+      End Get
+   End Property
+
+   Protected m_SelDayType As DayTypes = DayTypes.LASTMONTH
+   Public Property SelDayType As Integer
+      Get
+         Return m_SelDayType
+      End Get
+      Set(value As Integer)
+         Dim PrevSelDayType As DayTypes = m_SelDayType
+         m_SelDayType = value
+         WriteMainPrivateProfileString(S_OPENFILEDIALOG, K_DAYTYPE, Convert.ToInt32(m_SelDayType))
+         m_Date_Visibility = If(m_SelDayType = DayTypes.PERIOD, Visibility.Visible, Visibility.Collapsed)
+         If m_SelDayType = DayTypes.PERIOD Then
+            Select Case PrevSelDayType
+               Case DayTypes.LASTMONTH
+                  m_dtStartDate = DateTime.Today + TimeSpan.FromDays(1)
+                  m_dtEndDate = m_dtStartDate - TimeSpan.FromDays(31)
+               Case DayTypes.LAST3MONTHS
+
+               Case DayTypes.LAST6MONTHS
+
+            End Select
+            NotifyPropertyChanged(NameOf(dtStartDate))
+            NotifyPropertyChanged(NameOf(dtEndDate))
+         End If
+         NotifyPropertyChanged(NameOf(Date_Visibility))
+         ' aggiorno lista da Db
+         RefreshProjectList()
+         m_ProjectList_View.Refresh()
+      End Set
+   End Property
+
+   Private m_dtStartDate As DateTime = DateTime.Today
+   Public Property dtStartDate As DateTime
+      Get
+         Return m_dtStartDate
+      End Get
+      Set(value As DateTime)
+         m_dtStartDate = value
+         Dim lStartDate As Long = m_dtStartDate.ToFileTimeUtc()
+         WriteMainPrivateProfileString(S_MACHINELOGFILTER, K_STARTDATE, lStartDate.ToString())
+         ' aggiorno lista da Db
+         RefreshProjectList()
+         m_ProjectList_View.Refresh()
+      End Set
+   End Property
+
+   Private m_dtEndDate As DateTime = DateTime.Today
+   Public Property dtEndDate As DateTime
+      Get
+         Return m_dtEndDate
+      End Get
+      Set(value As DateTime)
+         m_dtEndDate = value
+         Dim lEndDate As Long = m_dtEndDate.ToFileTimeUtc()
+         WriteMainPrivateProfileString(S_MACHINELOGFILTER, K_ENDDATE, lEndDate.ToString())
+         ' aggiorno lista da Db
+         RefreshProjectList()
+         m_ProjectList_View.Refresh()
+      End Set
+   End Property
+
+   Private m_Date_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property Date_Visibility As Visibility
+      Get
+         Return m_Date_Visibility
+      End Get
+   End Property
+
+   Private m_RowQuantityList As New List(Of String)({50, 100, 150})
+   Public ReadOnly Property RowQuantityList As List(Of String)
+      Get
+         Return m_RowQuantityList
+      End Get
+   End Property
+
+   Private m_SelRowQuantity As RowQuantities
+   Public Property SelRowQuantity As Integer
+      Get
+         Return m_SelRowQuantity
+      End Get
+      Set(value As Integer)
+         m_SelRowQuantity = value
+         RefreshProjectList()
+         m_ProjectList_View.Refresh()
+      End Set
+   End Property
+
+   ' lista campi per ricerca testuale e con datepicker
+   Protected m_FilterTypeList As New ObservableCollection(Of IdNameStruct)
+   Public ReadOnly Property FilterTypeList As ObservableCollection(Of IdNameStruct)
+      Get
+         Return m_FilterTypeList
+      End Get
+   End Property
+
+   Protected m_SelFilterType As IdNameStruct = Nothing
+   Public Property SelFilterType As IdNameStruct
+      Get
+         Return m_SelFilterType
       End Get
       Set(value As IdNameStruct)
          ' resetto il contenuto della barra di ricerca testuale
@@ -103,15 +242,15 @@ Public MustInherit Class OpenProjectFileDialogVM
          ' resetto le selezioni sul calendario
          If Not IsNothing(SearchDate) Then SearchDate.Clear()
          ' setto il Tipo Filtro a NULL e refresho la lista dei progetti (in modo da averli visibili tutti)
-         m_SelSearchColumn = m_SearchColumnList(0)
+         m_SelFilterType = m_FilterTypeList(0)
          m_ProjectList_View.Refresh()
          ' ora setto il valore scelto come Tipo Filtro
-         m_SelSearchColumn = value
-         Select Case m_SelSearchColumn.Id
-            Case OpenProjFileColumn.ID, OpenProjFileColumn.BTLFILENAME, OpenProjFileColumn.LISTNAME, OpenProjFileColumn.MACHINE
+         m_SelFilterType = value
+         Select Case m_SelFilterType.Id
+            Case FilterTypes.ID, FilterTypes.BTLFILENAME, FilterTypes.LISTNAME, FilterTypes.MACHINE
                SearchText_Visibility = Visibility.Visible
                SearchDate_Visibility = Visibility.Collapsed
-            Case OpenProjFileColumn.EXPORTDATE, OpenProjFileColumn.CREATEDATE
+            Case BTLDateTypes.EXPORTDATE, BTLDateTypes.CREATEDATE
                SearchText_Visibility = Visibility.Collapsed
                SearchDate_Visibility = Visibility.Visible
             Case Else
@@ -161,18 +300,13 @@ Public MustInherit Class OpenProjectFileDialogVM
       End Set
    End Property
 
-   Public Enum OpenProjFileColumn As Integer
-      NULL = 0
-      ID = 1
-      BTLFILENAME = 2
-      LISTNAME = 3
-      EXPORTDATE = 4
-      CREATEDATE = 5
-      MACHINE = 6
-   End Enum
-
 #Region "Messages"
 
+   Public ReadOnly Property Title As String
+      Get
+         Return "Open Project"
+      End Get
+   End Property
    Public ReadOnly Property FilterType_Msg As String
       Get
          Return EgtMsg(61836)
@@ -236,6 +370,18 @@ Public MustInherit Class OpenProjectFileDialogVM
       End Get
    End Property
 
+   Public ReadOnly Property From_Msg As String
+      Get
+         Return EgtMsg(62523)
+      End Get
+   End Property
+
+   Public ReadOnly Property To_Msg As String
+      Get
+         Return EgtMsg(62524)
+      End Get
+   End Property
+
 #End Region
 
    ' Definizione comandi
@@ -244,31 +390,45 @@ Public MustInherit Class OpenProjectFileDialogVM
 
 #End Region    ' FIELDS & PROPERTIES
 
+   Sub New()
+   End Sub
+
 #Region "METHODS"
 
    Public MustOverride Function Init(ProjectType As ProjectType, Optional CurrProjectList As List(Of ProjectFileVM) = Nothing, Optional GoToProd As Boolean = False) As Boolean?
+   Public Overridable Sub RefreshProjectList(Optional GoToProd As Boolean = False)
+   End Sub
 
    Protected Sub LoadColumns(ProjectType As ProjectType)
       If ProjectType = ProjectType.PROJ Then
          ' carico le colonne della datagrid
          GetPrivateProfileColumns(S_OPENPROJFILEDLG_PROJ, ProjectColumns)
          ' carico campi su cui eseguire il filtro di ricerca
-         m_SearchColumnList = New ObservableCollection(Of IdNameStruct)({New IdNameStruct(OpenProjFileColumn.NULL, ""),
-                                                                        New IdNameStruct(OpenProjFileColumn.ID, Id_Msg),
-                                                                        New IdNameStruct(OpenProjFileColumn.BTLFILENAME, BTLFileName_Msg),
-                                                                        New IdNameStruct(OpenProjFileColumn.LISTNAME, ListName_Msg),
-                                                                        New IdNameStruct(OpenProjFileColumn.EXPORTDATE, ExportDate_Msg),
-                                                                        New IdNameStruct(OpenProjFileColumn.CREATEDATE, CreateDate_Msg),
-                                                                        New IdNameStruct(OpenProjFileColumn.MACHINE, Machine_Msg)})
+         m_BTLDateTypeList = New List(Of String)({CreateDate_Msg, ExportDate_Msg})
+         m_SelBTLDateType = BTLDateTypes.CREATEDATE
+         NotifyPropertyChanged(NameOf(BTLDateTypeList))
+         NotifyPropertyChanged(NameOf(SelBTLDateType))
+         m_FilterTypeList = New ObservableCollection(Of IdNameStruct)({New IdNameStruct(FilterTypes.NULL, ""),
+                                                                       New IdNameStruct(FilterTypes.ID, Id_Msg),
+                                                                       New IdNameStruct(FilterTypes.BTLFILENAME, BTLFileName_Msg),
+                                                                       New IdNameStruct(FilterTypes.LISTNAME, ListName_Msg),
+                                                                       New IdNameStruct(FilterTypes.MACHINE, Machine_Msg)})
+         m_SelFilterType = m_FilterTypeList.FirstOrDefault(Function(x) x.Id = FilterTypes.NULL)
+         NotifyPropertyChanged(NameOf(SelFilterType))
       ElseIf ProjectType = ProjectType.PROD Then
          ' carico le colonne della datagrid
          GetPrivateProfileColumns(S_OPENPROJFILEDLG_PROD, ProjectColumns)
          ' carico campi su cui eseguire il filtro di ricerca
-         m_SearchColumnList = New ObservableCollection(Of IdNameStruct)({New IdNameStruct(OpenProjFileColumn.NULL, ""),
-                                                                        New IdNameStruct(OpenProjFileColumn.ID, Id_Msg),
-                                                                        New IdNameStruct(OpenProjFileColumn.BTLFILENAME, BTLFileName_Msg),
-                                                                        New IdNameStruct(OpenProjFileColumn.CREATEDATE, CreateDate_Msg),
-                                                                        New IdNameStruct(OpenProjFileColumn.MACHINE, Machine_Msg)})
+         m_BTLDateTypeList = New List(Of String)({CreateDate_Msg})
+         m_SelBTLDateType = BTLDateTypes.CREATEDATE
+         NotifyPropertyChanged(NameOf(BTLDateTypeList))
+         NotifyPropertyChanged(NameOf(SelBTLDateType))
+         m_FilterTypeList = New ObservableCollection(Of IdNameStruct)({New IdNameStruct(FilterTypes.NULL, ""),
+                                                                         New IdNameStruct(FilterTypes.ID, Id_Msg),
+                                                                         New IdNameStruct(FilterTypes.BTLFILENAME, BTLFileName_Msg),
+                                                                         New IdNameStruct(FilterTypes.MACHINE, Machine_Msg)})
+         m_SelFilterType = m_FilterTypeList.FirstOrDefault(Function(x) x.Id = FilterTypes.NULL)
+         NotifyPropertyChanged(NameOf(SelFilterType))
       End If
       ' setto la visibilità delle colonne delle EgtDataGrid
       For Each col In ProjectColumns
@@ -301,22 +461,22 @@ Public MustInherit Class OpenProjectFileDialogVM
       Dim bProjectOk As Boolean = True
       If m_ProjectType = ProjectType.PROJ Then
          Dim CurrProj As ProjFileVM = DirectCast(Proj, ProjFileVM)
-         If m_SelSearchColumn.Id <> OpenProjFileColumn.NULL AndAlso (
-            (m_SelSearchColumn.Id = OpenProjFileColumn.EXPORTDATE AndAlso Not SearchDate.Contains(CurrProj.dtExportDate.Date)) OrElse
-            (m_SelSearchColumn.Id = OpenProjFileColumn.CREATEDATE AndAlso Not SearchDate.Contains(CurrProj.dtCreateDate.Date))) Then bProjectOk = False
-         If m_SelSearchColumn.Id <> OpenProjFileColumn.NULL AndAlso m_SearchText <> String.Empty AndAlso (
-            (m_SelSearchColumn.Id = OpenProjFileColumn.ID AndAlso CurrProj.sProjId.ToString.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0) OrElse
-            (m_SelSearchColumn.Id = OpenProjFileColumn.BTLFILENAME AndAlso CurrProj.sBTLFileName.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0) OrElse
-            (m_SelSearchColumn.Id = OpenProjFileColumn.LISTNAME AndAlso CurrProj.sListName.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0) OrElse
-            (m_SelSearchColumn.Id = OpenProjFileColumn.MACHINE AndAlso CurrProj.sMachine.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0)) Then bProjectOk = False
+         If m_SelFilterType.Id <> FilterTypes.NULL AndAlso (
+            (m_SelFilterType.Id = BTLDateTypes.EXPORTDATE AndAlso Not SearchDate.Contains(CurrProj.dtExportDate.Date)) OrElse
+            (m_SelFilterType.Id = BTLDateTypes.CREATEDATE AndAlso Not SearchDate.Contains(CurrProj.dtCreateDate.Date))) Then bProjectOk = False
+         If m_SelFilterType.Id <> FilterTypes.NULL AndAlso m_SearchText <> String.Empty AndAlso (
+            (m_SelFilterType.Id = FilterTypes.ID AndAlso CurrProj.sProjId.ToString.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0) OrElse
+            (m_SelFilterType.Id = FilterTypes.BTLFILENAME AndAlso CurrProj.sBTLFileName.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0) OrElse
+            (m_SelFilterType.Id = FilterTypes.LISTNAME AndAlso CurrProj.sListName.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0) OrElse
+            (m_SelFilterType.Id = FilterTypes.MACHINE AndAlso CurrProj.sMachine.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0)) Then bProjectOk = False
       ElseIf m_ProjectType = ProjectType.PROD Then
          Dim CurrProj As ProdFileVM = DirectCast(Proj, ProdFileVM)
-         If m_SelSearchColumn.Id <> OpenProjFileColumn.NULL AndAlso (
-            (m_SelSearchColumn.Id = OpenProjFileColumn.CREATEDATE AndAlso Not SearchDate.Contains(CurrProj.dtCreateDate.Date))) Then bProjectOk = False
-         If m_SelSearchColumn.Id <> OpenProjFileColumn.NULL AndAlso m_SearchText <> String.Empty AndAlso (
-            (m_SelSearchColumn.Id = OpenProjFileColumn.ID AndAlso CurrProj.sProdId.ToString.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0) OrElse
-            (m_SelSearchColumn.Id = OpenProjFileColumn.BTLFILENAME AndAlso CurrProj.sBTLFileName.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0) OrElse
-            (m_SelSearchColumn.Id = OpenProjFileColumn.MACHINE AndAlso CurrProj.sMachine.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0)) Then bProjectOk = False
+         If m_SelFilterType.Id <> FilterTypes.NULL AndAlso (
+            (m_SelFilterType.Id = BTLDateTypes.CREATEDATE AndAlso Not SearchDate.Contains(CurrProj.dtCreateDate.Date))) Then bProjectOk = False
+         If m_SelFilterType.Id <> FilterTypes.NULL AndAlso m_SearchText <> String.Empty AndAlso (
+            (m_SelFilterType.Id = FilterTypes.ID AndAlso CurrProj.sProdId.ToString.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0) OrElse
+            (m_SelFilterType.Id = FilterTypes.BTLFILENAME AndAlso CurrProj.sBTLFileName.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0) OrElse
+            (m_SelFilterType.Id = FilterTypes.MACHINE AndAlso CurrProj.sMachine.IndexOf(SearchText, StringComparison.InvariantCultureIgnoreCase) < 0)) Then bProjectOk = False
       End If
       Return bProjectOk
    End Function

EgtBEAMWALL.Core/ProjectFileVM/ProdFileM.vb

@@ -10,6 +10,9 @@ Public Class ProdFileM
          Return m_nProjIdList
       End Get
    End Property
+   Public Sub SetProjIdList(value As List(Of Integer))
+      m_nProjIdList = value
+   End Sub
 
    Protected m_sName As String
    Public ReadOnly Property sName As String

EgtBEAMWALL.Core/ProjectFileVM/ProjFileM.vb

@@ -19,39 +19,49 @@ Public Class ProjFileM
    End Property
 
    Protected m_sBTLFileName As String = String.Empty
-   Public Property sBTLFileName As String
-      Get
-         Return m_sBTLFileName
-      End Get
-      Set(value As String)
-         m_sBTLFileName = value
-      End Set
-   End Property
+    Public Property sBTLFileName As String
+        Get
+            Return m_sBTLFileName
+        End Get
+        Set(value As String)
+            m_sBTLFileName = value
+        End Set
+    End Property
+
+    Protected m_sDescription As String = String.Empty
+    Public Property sDescription As String
+        Get
+            Return m_sDescription
+        End Get
+        Set(value As String)
+            m_sDescription = value
+        End Set
+    End Property
 
 #Region "CONSTRUCTORS"
 
-   Protected Sub New()
+    Protected Sub New()
    End Sub
 
    Public Shared Function CreateNewProjFileM() As ProjFileM
       Return New ProjFileM
    End Function
 
-   Public Shared Function CreateProjFileM(nProjId As Integer, nProdId As Integer, dtCreateProjDate As DateTime, dtExportDate As DateTime, sListName As String,
-                                          sBTLFileName As String, IsNew As Boolean, IsLocked As Boolean, nType As BWType, sMachine As String) As ProjFileM
-      Dim NewProjectFileM As New ProjFileM
-      NewProjectFileM.m_nProjId = nProjId
-      NewProjectFileM.m_nProdId = nProdId
-      NewProjectFileM.m_dtCreateDate = dtCreateProjDate
-      NewProjectFileM.m_dtExportDate = dtExportDate
-      NewProjectFileM.m_sListName = sListName
-      NewProjectFileM.m_sBTLFileName = sBTLFileName
-      NewProjectFileM.m_bIsNew = IsNew
-      NewProjectFileM.m_bIsLocked = IsLocked
-      NewProjectFileM.m_nType = nType
-      NewProjectFileM.m_sMachine = sMachine
-      Return NewProjectFileM
-   End Function
+    Public Shared Function CreateProjFileM(nProjId As Integer, nProdId As Integer, dtCreateProjDate As DateTime, dtExportDate As DateTime, sListName As String, sBTLFileName As String, sDescription As String, IsNew As Boolean, IsLocked As Boolean, nType As BWType, sMachine As String) As ProjFileM
+        Dim NewProjectFileM As New ProjFileM
+        NewProjectFileM.m_nProjId = nProjId
+        NewProjectFileM.m_nProdId = nProdId
+        NewProjectFileM.m_dtCreateDate = dtCreateProjDate
+        NewProjectFileM.m_dtExportDate = dtExportDate
+        NewProjectFileM.m_sListName = sListName
+        NewProjectFileM.m_sBTLFileName = sBTLFileName
+        NewProjectFileM.m_sDescription = sDescription
+        NewProjectFileM.m_bIsNew = IsNew
+        NewProjectFileM.m_bIsLocked = IsLocked
+        NewProjectFileM.m_nType = nType
+        NewProjectFileM.m_sMachine = sMachine
+        Return NewProjectFileM
+    End Function
 
 #End Region    ' CONSTRUCTORS
 

EgtBEAMWALL.Core/ProjectManager/ProjFileVM.vb

@@ -68,6 +68,12 @@ Public Class ProjFileVM
       End Get
    End Property
 
+   Public ReadOnly Property sDescription As String
+      Get
+         Return ProjFileM.sDescription
+      End Get
+   End Property
+
    Public ReadOnly Property sListName As String
       Get
          Return ProjFileM.sListName

EgtBEAMWALL.Core/Utility/BTLIniFile.vb

@@ -147,9 +147,9 @@ Public Module BTLIniFile
                Dim dMin As Double
                Dim dMax As Double
                Dim dDefault As Double
-               StringToDouble(sBTLParamParams(2), dMin)
-               StringToDouble(sBTLParamParams(3), dMax)
-               StringToDouble(sBTLParamParams(4), dDefault)
+               StringToDoubleAdv(sBTLParamParams(2), dMin)
+               StringToDoubleAdv(sBTLParamParams(3), dMax)
+               StringToDoubleAdv(sBTLParamParams(4), dDefault)
                Dim ParamType As BTLParamType
                If sBTLParamParams(0) = "d" Then
                   ParamType = BTLParamType.DOUBLE_
@@ -200,9 +200,9 @@ Public Module BTLIniFile
                Dim dMin As Double
                Dim dMax As Double
                Dim dDefault As Double
-               StringToDouble(sBTLParamParams(2), dMin)
-               StringToDouble(sBTLParamParams(3), dMax)
-               StringToDouble(sBTLParamParams(4), dDefault)
+               StringToDoubleAdv(sBTLParamParams(2), dMin)
+               StringToDoubleAdv(sBTLParamParams(3), dMax)
+               StringToDoubleAdv(sBTLParamParams(4), dDefault)
                Dim ParamType As BTLParamType
                If sBTLParamParams(0) = "d" Then
                   ParamType = BTLParamType.DOUBLE_

EgtBEAMWALL.Core/Utility/DimensionsIniFile.vb

@@ -27,7 +27,7 @@ Public Module DimensionsIniFile
             Dim GridLenType As GridUnitType
             Integer.TryParse(sValueParams(0), nDimIndex)
             Integer.TryParse(sValueParams(1), nDimType)
-            StringToDouble(sValueParams(2), GridLenValue)
+            StringToDoubleAdv(sValueParams(2), GridLenValue)
             Integer.TryParse(sValueParams(3), GridLenType)
             GridDimsList.Add(New GridDimension(GridName, nDimIndex, nDimType, New GridLength(GridLenValue, GridLenType)))
          End If

EgtBEAMWALL.DataLayer/App.config

@@ -1,45 +1,49 @@
 <?xml version="1.0" encoding="utf-8"?>
 <configuration>
-    <configSections>
-        <!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
-        <section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
-    </configSections>
-    <entityFramework>
-        <defaultConnectionFactory type="MySql.Data.Entity.MySqlConnectionFactory, MySql.Data.Entity.EF6" />
-        <providers>
-            <provider invariantName="System.Data.SqlClient" type="System.Data.Entity.SqlServer.SqlProviderServices, EntityFramework.SqlServer" />
-            
-        <provider invariantName="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlProviderServices, MySql.Data.EntityFramework, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d">
-      </provider></providers>
-    </entityFramework>
-    <connectionStrings>
-        <add name="DefaultConnection" connectionString="server=localhost;port=3306;User Id=steamware;password=Egalware_24068!;Persist Security Info=True;database=EgtBwDb_000470;SslMode=none" providerName="MySql.Data.MySqlClient" />
-    </connectionStrings>
-    <runtime>
-        <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
-            <dependentAssembly>
-                <assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
-                <bindingRedirect oldVersion="0.0.0.0-8.0.21.0" newVersion="8.0.21.0" />
-            </dependentAssembly>
-            <dependentAssembly>
-                <assemblyIdentity name="System.Runtime.CompilerServices.Unsafe" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />
-                <bindingRedirect oldVersion="0.0.0.0-5.0.0.0" newVersion="5.0.0.0" />
-            </dependentAssembly>
-            <dependentAssembly>
-                <assemblyIdentity name="Google.Protobuf" publicKeyToken="a7d26565bac4d604" culture="neutral" />
-                <bindingRedirect oldVersion="0.0.0.0-3.19.4.0" newVersion="3.19.4.0" />
-            </dependentAssembly>
-            <dependentAssembly>
-                <assemblyIdentity name="K4os.Compression.LZ4.Streams" publicKeyToken="2186fa9121ef231d" culture="neutral" />
-                <bindingRedirect oldVersion="0.0.0.0-1.2.6.0" newVersion="1.2.6.0" />
-            </dependentAssembly>
-            <dependentAssembly>
-                <assemblyIdentity name="BouncyCastle.Crypto" publicKeyToken="0e99375e54769942" culture="neutral" />
-                <bindingRedirect oldVersion="0.0.0.0-1.8.5.0" newVersion="1.8.5.0" />
-            </dependentAssembly>
-        </assemblyBinding>
-    </runtime>
-    <startup>
-        <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2" />
-    </startup>
+   <configSections>
+      <!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
+      <section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
+   </configSections>
+   <entityFramework>
+      <!--<defaultConnectionFactory type="MySql.Data.Entity.MySqlConnectionFactory, MySql.Data.EntityFramework" />-->
+      <defaultConnectionFactory type="System.Data.Entity.Infrastructure.SqlConnectionFactory, EntityFramework" />
+      <providers>
+         <provider invariantName="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlProviderServices, MySql.Data.EntityFramework, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d">
+         </provider>
+      </providers>
+   </entityFramework>
+   <connectionStrings>
+      <add name="DefaultConnection" connectionString="server=localhost;port=3306;User Id=steamware;password=Egalware_24068!;Persist Security Info=True;database=EgtBwDb_000470;SslMode=none" providerName="MySql.Data.MySqlClient" />
+   </connectionStrings>
+   <runtime>
+      <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
+         <dependentAssembly>
+            <assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-8.0.21.0" newVersion="8.0.21.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="System.Runtime.CompilerServices.Unsafe" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-6.0.0.0" newVersion="6.0.0.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="Google.Protobuf" publicKeyToken="a7d26565bac4d604" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-3.21.9.0" newVersion="3.21.9.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="K4os.Compression.LZ4.Streams" publicKeyToken="2186fa9121ef231d" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-1.3.5.0" newVersion="1.3.5.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="BouncyCastle.Crypto" publicKeyToken="0e99375e54769942" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-1.9.0.0" newVersion="1.9.0.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="System.Memory" publicKeyToken="cc7b13ffcd2ddd51" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-4.0.1.2" newVersion="4.0.1.2" />
+         </dependentAssembly>
+      </assemblyBinding>
+   </runtime>
+   <startup>
+      <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2" />
+   </startup>
 </configuration>

EgtBEAMWALL.DataLayer/Controllers/BTLPartController.cs

@@ -24,7 +24,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// <param name="corePart"></param>
         /// <param name="currProjDbId"></param>
         /// <returns></returns>
-        public static BTLPartModel ConvertFromCore(Core.BTLPartM corePart, int currProjDbId)
+        public BTLPartModel ConvertFromCore(Core.BTLPartM corePart, int currProjDbId)
         {
             BTLPartModel answ = new BTLPartModel();
             if (corePart != null)

EgtBEAMWALL.DataLayer/Controllers/LogMachineController.cs

@@ -23,7 +23,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// </summary>
         /// <param name="coreMacLog"></param>
         /// <returns></returns>
-        public static LogMachineModel ConvertFromCore(Core.MachLog coreMacLog)
+        public LogMachineModel ConvertFromCore(Core.MachLog coreMacLog)
         {
             LogMachineModel answ = new LogMachineModel();
             if (coreMacLog != null)
@@ -53,7 +53,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// </summary>
         /// <param name="dbLog"></param>
         /// <returns></returns>
-        public static Core.MachLog ConvertToCore(LogMachineModel dbLog)
+        public Core.MachLog ConvertToCore(LogMachineModel dbLog)
         {
             var newRecord = Core.MachLog.CreateMachLog(dbLog.AlarmCode, dbLog.AlarmDatetime, dbLog.AlarmMessage, dbLog.AlarmOperation, dbLog.AlarmType, dbLog.CommandExecutedCorrectly, dbLog.CommandState, dbLog.CommandType, dbLog.Description, dbLog.NewOpState, dbLog.ResultType, dbLog.VarAddress, dbLog.VarValue);
             return newRecord;

EgtBEAMWALL.DataLayer/Controllers/MachGroupController.cs

@@ -8,12 +8,6 @@ namespace EgtBEAMWALL.DataLayer.Controllers
 {
     public class MachGroupController : IDisposable
     {
-        #region Public Fields
-
-        public static MachGroupController man = new MachGroupController();
-
-        #endregion Public Fields
-
         #region Public Constructors
 
         public MachGroupController()
@@ -30,7 +24,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// <param name="coreMachGroup"></param>
         /// <param name="currProdDbId"></param>
         /// <returns></returns>
-        public static MachGroupModel ConvertFromCore(Core.MyMachGroupM coreMachGroup, int currProdDbId)
+        public MachGroupModel ConvertFromCore(Core.MyMachGroupM coreMachGroup, int currProdDbId)
         {
             MachGroupModel answ = new MachGroupModel();
             if (coreMachGroup != null)
@@ -63,6 +57,8 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         {
             ProdModel currData = new ProdModel();
             List<PartModel> PartList2Add = new List<PartModel>();
+            var myPartCtrl = new PartController();
+            var myStatusMapCtrl = new StatusMapController();
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
                 // Recupero il PROD nel contesto
@@ -72,7 +68,8 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                                         .SingleOrDefault();
                 try
                 {
-                    var convCurrMG = MachGroupController.ConvertFromCore(newMachGroup, currData.ProdDbId);
+                    var locMGCtrl = new MachGroupController();
+                    var convCurrMG = locMGCtrl.ConvertFromCore(newMachGroup, currData.ProdDbId);
 
                     convCurrMG.ProdIndex = 1;
 
@@ -81,15 +78,25 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                     // Commit changes
                     localDbCtx.SaveChanges();
 
-                    int MachGroupDbId = MachGroupController.man.FindByMachGroupId(ProdId, newMachGroup.Id).MachGroupDbId;
+                    int MachGroupDbId = FindByMachGroupId(ProdId, newMachGroup.Id).MachGroupDbId;
+                    // 2023.05.10 leggo elenco part in una sola volta
+
+                    var currMgPartList = localDbCtx
+                                      .PartList
+                                      .Where(x => x.MachGroup.Prod.ProdId == ProdId && x.MachGroup.MachGroupId == newMachGroup.Id)
+                                      .ToList();
                     // verifico se uguali o meno...
                     foreach (var currPartM in newMachGroup.PartMList)
                     {
-                        var currPart = localDbCtx
-                                          .PartList
-                                          .Where(x => x.MachGroup.Prod.ProdId == ProdId && x.MachGroup.MachGroupId == newMachGroup.Id && x.PartId == currPartM.nPartId)
+                        //var currPart = localDbCtx
+                        //                  .PartList
+                        //                  .Where(x => x.MachGroup.Prod.ProdId == ProdId && x.MachGroup.MachGroupId == newMachGroup.Id && x.PartId == currPartM.nPartId)
+                        //                  .SingleOrDefault();
+                        var currPart = currMgPartList
+                                          .Where(x => x.PartId == currPartM.nPartId)
                                           .SingleOrDefault();
-                        var convCurrPartM = PartController.ConvertFromCore(currPartM, MachGroupDbId);
+
+                        var convCurrPartM = myPartCtrl.ConvertFromCore(currPartM, MachGroupDbId);
                         if (currPart != null)
                         {
                             // se non identico x equality limitata a ViewOptim...
@@ -125,7 +132,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                     // Commit changes
                     localDbCtx.SaveChanges();
                     // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", ProdId, newMachGroup.Id, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupAdd, "");
+                    myStatusMapCtrl.UpdateAction("", ProdId, newMachGroup.Id, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupAdd, "");
                 }
                 catch (Exception exc)
                 {
@@ -177,6 +184,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
+                var myStatusMapCtrl = new StatusMapController();
                 // inizio eliminando le part
                 var parts2del = localDbCtx
                                 .PartList
@@ -197,7 +205,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                     localDbCtx.SaveChanges();
 
                     // registro modifica StatusMap
-                    StatusMapController.man.UpdateAction(MG2Del.SupervisorId, ProdId, MG2Del.MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupRem, "");
+                    myStatusMapCtrl.UpdateAction(MG2Del.SupervisorId, ProdId, MG2Del.MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupRem, "");
 
                     done = true;
                 }
@@ -209,7 +217,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                 }
 
                 // se fatto aggiorno info sullo status
-                StatusMapController.man.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupRem, "");
+                myStatusMapCtrl.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupRem, "");
             }
             return done;
         }
@@ -393,6 +401,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
+                var myStatusMapCtrl = new StatusMapController();
                 try
                 {
                     // aggiorno
@@ -405,13 +414,19 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                         currRecord.State = Core.ItemState.ND;
                         currRecord.SupervisorId = "";
                         currRecord.ProdIndex = 0;
-                    }
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-                    // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupRemovedFromSupervisor, "");
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        // aggiorno info sullo status
+                        myStatusMapCtrl.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupRemovedFromSupervisor, "");
 
-                    done = true;
+                        done = true;
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on MachGroup.RemoveFromSupervisor: req item was not found | ProdId {ProdId} | MachGroupId {MachGroupId}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
                 catch (Exception exc)
                 {
@@ -435,23 +450,33 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
+                var myStatusMapCtrl = new StatusMapController();
                 try
                 {
                     // aggiorno
-                    localDbCtx
+                    var item2upd = localDbCtx
                         .MachGroupList
                         .Where(x => x.Prod.ProdId == ProdId && x.MachGroupId == MachGroupId)
-                        .FirstOrDefault()
-                        .State = newState;
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-                    done = true;
-                    // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupNeedRedo, Value);
+                        .FirstOrDefault();
+                    if (item2upd != null)
+                    {
+                        item2upd.State = newState;
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
+                        // aggiorno info sullo status
+                        myStatusMapCtrl.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupNeedRedo, Value);
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on MachGroup.SetNeedRedo: req item was not found | ProdId {ProdId} | MachGroupId {MachGroupId} | newState {newState} | Value {Value}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
                 catch (Exception exc)
                 {
-                    string errMessage = $"EXCEPTION on MachGroup.UpdateStatus: {Environment.NewLine}{exc}";
+                    string errMessage = $"EXCEPTION on MachGroup.SetNeedRedo: {Environment.NewLine}{exc}";
                     Console.WriteLine(errMessage);
                     Log.Error(errMessage);
                 }
@@ -469,20 +494,30 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
-                var item2update = localDbCtx
-                                    .MachGroupList
-                                    .Where(x => x.MachGroupDbId == updItem.MachGroupDbId)
-                                    .SingleOrDefault();
+                var myStatusMapCtrl = new StatusMapController();
                 try
                 {
-                    // update, vers 1...
-                    localDbCtx.Entry(item2update).CurrentValues.SetValues(updItem);
+                    var item2update = localDbCtx
+                                        .MachGroupList
+                                        .Where(x => x.MachGroupDbId == updItem.MachGroupDbId)
+                                        .SingleOrDefault();
+                    if (item2update != null)
+                    {
+                        // update, vers 1...
+                        localDbCtx.Entry(item2update).CurrentValues.SetValues(updItem);
 
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-                    done = true;
-                    // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", updItem.Prod.ProdId, updItem.MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupMod, "");
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
+                        // aggiorno info sullo status
+                        myStatusMapCtrl.UpdateAction("", updItem.Prod.ProdId, updItem.MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupMod, "");
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on MachGroup.Update: req item was not found | ProdDbId {updItem.ProdDbId} | MachGroupId {updItem.MachGroupId} | ProdIndex {updItem.ProdIndex}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
                 catch (Exception exc)
                 {
@@ -506,6 +541,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
+                var myStatusMapCtrl = new StatusMapController();
                 try
                 {
                     // aggiorno
@@ -513,15 +549,21 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                                         .MachGroupList
                                         .Where(x => x.Prod.ProdId == ProdId && x.MachGroupId == MachGroupId)
                                         .FirstOrDefault();
-
-                    currRecord.DtEnd = DtEnd;
-
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-
-                    done = true;
-                    // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, DtEnd == DateTime.MinValue ? Core.StatusMapOpType.ResetPartEnd : Core.StatusMapOpType.PartEnd, "");
+                    if (currRecord != null)
+                    {
+                        currRecord.DtEnd = DtEnd;
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
+                        // aggiorno info sullo status
+                        myStatusMapCtrl.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, DtEnd == DateTime.MinValue ? Core.StatusMapOpType.ResetPartEnd : Core.StatusMapOpType.PartEnd, "");
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on MachGroup.UpdateEnd: req item was not found | ProdId {ProdId} | MachGroupId {MachGroupId} | DtEnd {DtEnd}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
                 catch (Exception exc)
                 {
@@ -548,15 +590,23 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                 try
                 {
                     // aggiorno
-                    localDbCtx
+                    var item2upd = localDbCtx
                         .MachGroupList
                         .Where(x => x.Prod.ProdId == ProdId && x.MachGroupId == MachGroupId)
-                        .FirstOrDefault()
-                        .ProdIndex = newProdIndex;
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-
-                    done = true;
+                        .FirstOrDefault();
+                    if (item2upd != null)
+                    {
+                        item2upd.ProdIndex = newProdIndex;
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on MachGroup.UpdateOrder: req item was not found | ProdId {ProdId} | MachGroupId {MachGroupId} | newProdIndex {newProdIndex}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
                 catch (Exception exc)
                 {
@@ -581,6 +631,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
+                var myStatusMapCtrl = new StatusMapController();
                 try
                 {
                     // aggiorno
@@ -588,15 +639,21 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                                         .MachGroupList
                                         .Where(x => x.Prod.ProdId == ProdId && x.MachGroupId == MachGroupId)
                                         .FirstOrDefault();
-
-                    currRecord.DtStart = DtStart;
-
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-
-                    done = true;
-                    // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, DtStart == DateTime.MinValue ? Core.StatusMapOpType.ResetPartStart : Core.StatusMapOpType.PartStart, "");
+                    if (currRecord != null)
+                    {
+                        currRecord.DtStart = DtStart;
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
+                        // aggiorno info sullo status
+                        myStatusMapCtrl.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, DtStart == DateTime.MinValue ? Core.StatusMapOpType.ResetPartStart : Core.StatusMapOpType.PartStart, "");
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on MachGroup.UpdateStart: req item was not found | ProdId {ProdId} | MachGroupId {MachGroupId} | DtStart {DtStart}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
                 catch (Exception exc)
                 {
@@ -621,6 +678,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
+                var myStatusMapCtrl = new StatusMapController();
                 try
                 {
                     // aggiorno
@@ -628,15 +686,22 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                                         .MachGroupList
                                         .Where(x => x.Prod.ProdId == ProdId && x.MachGroupId == MachGroupId)
                                         .FirstOrDefault();
-
-                    currRecord.DtStart = DtStart;
-                    currRecord.DtEnd = DtEnd;
-
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-                    done = true;
-                    // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupMod, "");
+                    if (currRecord != null)
+                    {
+                        currRecord.DtStart = DtStart;
+                        currRecord.DtEnd = DtEnd;
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
+                        // aggiorno info sullo status
+                        myStatusMapCtrl.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupMod, "");
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on MachGroup.UpdateStartEnd: req item was not found | ProdId {ProdId} | MachGroupId {MachGroupId} | DtStart {DtStart} | DtEnd {DtEnd}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
                 catch (Exception exc)
                 {
@@ -659,20 +724,29 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
+                var myStatusMapCtrl = new StatusMapController();
                 try
                 {
                     // aggiorno
-                    localDbCtx
+                    var item2upd = localDbCtx
                         .MachGroupList
                         .Where(x => x.Prod.ProdId == ProdId && x.MachGroupId == MachGroupId)
-                        .FirstOrDefault()
-                        .State = newState;
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-
-                    done = true;
-                    // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupMod, "");
+                        .FirstOrDefault();
+                    if (item2upd != null)
+                    {
+                        item2upd.State = newState;
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
+                        // aggiorno info sullo status
+                        myStatusMapCtrl.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupMod, "");
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on MachGroup.UpdateStatus: req item was not found | ProdId {ProdId} | MachGroupId {MachGroupId} | newState {newState}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
                 catch (Exception exc)
                 {
@@ -691,23 +765,32 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
+                var myStatusMapCtrl = new StatusMapController();
                 try
                 {
                     // aggiorno
-                    var currRecord = localDbCtx
+                    var item2upd = localDbCtx
                                         .MachGroupList
                                         .Where(x => x.Prod.ProdId == ProdId && x.MachGroupId == MachGroupId)
                                         .FirstOrDefault();
+                    if (item2upd != null)
+                    {
+                        item2upd.SupervisorId = SupervisorId;
+                        item2upd.State = Core.ItemState.Assigned;
 
-                    currRecord.SupervisorId = SupervisorId;
-                    currRecord.State = Core.ItemState.Assigned;
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
 
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-
-                    done = true;
-                    // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupAssignedToSupervisor, "");
+                        // aggiorno info sullo status
+                        myStatusMapCtrl.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupAssignedToSupervisor, "");
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on MachGroup.UpdateSupervisor: req item was not found | ProdId {ProdId} | MachGroupId {MachGroupId} | SupervisorId {SupervisorId}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
                 catch (Exception exc)
                 {

EgtBEAMWALL.DataLayer/Controllers/PartController .cs

@@ -7,17 +7,10 @@ namespace EgtBEAMWALL.DataLayer.Controllers
 {
     public class PartController : IDisposable
     {
-        #region Public Fields
-
-        public static PartController man = new PartController();
-
-        #endregion Public Fields
-
         #region Public Constructors
 
         public PartController()
-        {
-        }
+        { }
 
         #endregion Public Constructors
 
@@ -29,12 +22,12 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// <param name="corePart"></param>
         /// <param name="currMachGroupDbId"></param>
         /// <returns></returns>
-        public static PartModel ConvertFromCore(Core.PartM corePart, int currMachGroupDbId)
+        public PartModel ConvertFromCore(Core.PartM corePart, int currMachGroupDbId)
         {
             PartModel answ = new PartModel();
             if (corePart != null)
             {
-                int BTLPartId = man.FindBtlPartByBPI(corePart.nProjId, corePart.nBTLPartId);
+                int BTLPartId = FindBtlPartByBPI(corePart.nProjId, corePart.nBTLPartId);
                 answ = new PartModel()
                 {
                     PartId = corePart.nPartId,
@@ -74,23 +67,34 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
+                var myStatusMapCtrl = new StatusMapController();
                 var item2del = localDbCtx
                                 .PartList
                                 .Where(x => x.MachGroup.Prod.ProdId == ProdId && x.MachGroup.MachGroupId == MachGroupId && x.PartId == PartId)
                                 .SingleOrDefault();
-                try
+
+                if (item2del != null)
                 {
-                    // Remove from database
-                    localDbCtx.PartList.Remove(item2del);
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-                    done = true;
-                    // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupMod, "");
+                    try
+                    {
+                        // Remove from database
+                        localDbCtx.PartList.Remove(item2del);
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
+                        // aggiorno info sullo status
+                        myStatusMapCtrl.UpdateAction("", ProdId, MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupMod, "");
+                    }
+                    catch (Exception exc)
+                    {
+                        string errMessage = $"EXCEPTION on Part.Delete: ProdId: {ProdId} | MachGroupId: {MachGroupId} | PartId: {PartId}{Environment.NewLine}{exc}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
-                catch (Exception exc)
+                else
                 {
-                    string errMessage = $"EXCEPTION on Part.Delete: ProdId: {ProdId} | MachGroupId: {MachGroupId} | PartId: {PartId}{Environment.NewLine}{exc}";
+                    string errMessage = $"ERROR on Part.Delete (01): req item was not found | ProdId {ProdId} | MachGroupId {MachGroupId} | PartId {PartId}";
                     Console.WriteLine(errMessage);
                     Log.Error(errMessage);
                 }
@@ -112,17 +116,27 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                                 .PartList
                                 .Where(x => x.PartDbId == PartDbId)
                                 .SingleOrDefault();
-                try
+
+                if (item2del != null)
                 {
-                    // Add to database
-                    localDbCtx.PartList.Remove(item2del);
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-                    done = true;
+                    try
+                    {
+                        // Add to database
+                        localDbCtx.PartList.Remove(item2del);
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
+                    }
+                    catch (Exception exc)
+                    {
+                        string errMessage = $"EXCEPTION on Part.Delete: {Environment.NewLine}{exc}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
-                catch (Exception exc)
+                else
                 {
-                    string errMessage = $"EXCEPTION on Part.Delete: {Environment.NewLine}{exc}";
+                    string errMessage = $"ERROR on Part.Delete (02): req item was not found | PartDbId {PartDbId}";
                     Console.WriteLine(errMessage);
                     Log.Error(errMessage);
                 }
@@ -209,28 +223,38 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext locallocalDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
-                var item2update = locallocalDbCtx
+                var myStatusMapCtrl = new StatusMapController();
+                var item2upd = locallocalDbCtx
                                     .PartList
                                     .Where(x => x.PartDbId == updItem.PartDbId)
                                     .SingleOrDefault();
-                try
+                if (item2upd != null)
                 {
-                    // update, vers 1...
-                    locallocalDbCtx.Entry(item2update).CurrentValues.SetValues(updItem);
+                    try
+                    {
+                        // update, vers 1...
+                        locallocalDbCtx.Entry(item2upd).CurrentValues.SetValues(updItem);
 
-                    //// update, vers 2
-                    //localDbCtx.PartList.Remove(item2del);
-                    //localDbCtx.PartList.Add(updItem);
+                        //// update, vers 2
+                        //localDbCtx.PartList.Remove(item2del);
+                        //localDbCtx.PartList.Add(updItem);
 
-                    // Commit changes
-                    locallocalDbCtx.SaveChanges();
-                    done = true;
-                    // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", updItem.MachGroup.Prod.ProdId, updItem.PartId, Core.StatusMapItemType.Part, Core.StatusMapOpType.MachGroupMod, "");
+                        // Commit changes
+                        locallocalDbCtx.SaveChanges();
+                        done = true;
+                        // aggiorno info sullo status
+                        myStatusMapCtrl.UpdateAction("", updItem.MachGroup.Prod.ProdId, updItem.PartId, Core.StatusMapItemType.Part, Core.StatusMapOpType.MachGroupMod, "");
+                    }
+                    catch (Exception exc)
+                    {
+                        string errMessage = $"EXCEPTION on Part.Update: {Environment.NewLine}{exc}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
-                catch (Exception exc)
+                else
                 {
-                    string errMessage = $"EXCEPTION on Part.Update: {Environment.NewLine}{exc}";
+                    string errMessage = $"ERROR on Part.Update (01): req item was not found | PartId {updItem.PartId} | PartDbId {updItem.PartDbId} | BTLPartDbId {updItem.BTLPartDbId}";
                     Console.WriteLine(errMessage);
                     Log.Error(errMessage);
                 }
@@ -249,19 +273,30 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext locallocalDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
+                var myStatusMapCtrl = new StatusMapController();
                 try
                 {
                     // aggiorno
-                    locallocalDbCtx
+                    var item2upd = locallocalDbCtx
                         .PartList
                         .Where(x => x.MachGroup.Prod.ProdId == ProdId && x.MachGroup.MachGroupId == MachGroupId && x.PartId == PartId)
-                        .FirstOrDefault()
-                        .DtEnd = DtEnd;
-                    // Commit changes
-                    locallocalDbCtx.SaveChanges();
-                    done = true;
-                    // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", ProdId, PartId, Core.StatusMapItemType.Part, DtEnd == DateTime.MinValue ? Core.StatusMapOpType.ResetPartEnd : Core.StatusMapOpType.PartEnd, "");
+                        .FirstOrDefault();
+
+                    if (item2upd != null)
+                    {
+                        item2upd.DtEnd = DtEnd;
+                        // Commit changes
+                        locallocalDbCtx.SaveChanges();
+                        done = true;
+                        // aggiorno info sullo status
+                        myStatusMapCtrl.UpdateAction("", ProdId, PartId, Core.StatusMapItemType.Part, DtEnd == DateTime.MinValue ? Core.StatusMapOpType.ResetPartEnd : Core.StatusMapOpType.PartEnd, "");
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on Part.UpdateEnd: req item was not found | ProdId {ProdId} | MachGroupId {MachGroupId} | PartId {PartId} | DtEnd {DtEnd}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
                 catch (Exception exc)
                 {
@@ -284,19 +319,29 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext locallocalDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
+                var myStatusMapCtrl = new StatusMapController();
                 try
                 {
                     // aggiorno
-                    locallocalDbCtx
+                    var item2upd = locallocalDbCtx
                         .PartList
                         .Where(x => x.MachGroup.Prod.ProdId == ProdId && x.MachGroup.MachGroupId == MachGroupId && x.PartId == PartId)
-                        .FirstOrDefault()
-                        .DtStart = DtStart;
-                    // Commit changes
-                    locallocalDbCtx.SaveChanges();
-                    done = true;
-                    // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", ProdId, PartId, Core.StatusMapItemType.Part, DtStart == DateTime.MinValue ? Core.StatusMapOpType.ResetPartStart : Core.StatusMapOpType.PartStart, "");
+                        .FirstOrDefault();
+                    if (item2upd != null)
+                    {
+                        item2upd.DtStart = DtStart;
+                        // Commit changes
+                        locallocalDbCtx.SaveChanges();
+                        done = true;
+                        // aggiorno info sullo status
+                        myStatusMapCtrl.UpdateAction("", ProdId, PartId, Core.StatusMapItemType.Part, DtStart == DateTime.MinValue ? Core.StatusMapOpType.ResetPartStart : Core.StatusMapOpType.PartStart, "");
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on Part.UpdateStart: req item was not found | ProdId {ProdId} | MachGroupId {MachGroupId} | PartId {PartId} | DtStart {DtStart}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
                 catch (Exception exc)
                 {
@@ -320,19 +365,29 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext locallocalDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
+                var myStatusMapCtrl = new StatusMapController();
                 try
                 {
                     // aggiorno
-                    locallocalDbCtx
+                    var item2upd = locallocalDbCtx
                         .PartList
                         .Where(x => x.MachGroup.Prod.ProdId == ProdId && x.MachGroup.MachGroupId == MachGroupId && x.PartId == PartId)
-                        .FirstOrDefault()
-                        .State = newState;
-                    // Commit changes
-                    locallocalDbCtx.SaveChanges();
-                    done = true;
-                    // aggiorno info sullo status
-                    StatusMapController.man.UpdateAction("", ProdId, PartId, Core.StatusMapItemType.Part, newState == Core.ItemState.Scrapped ? Core.StatusMapOpType.SetPartScrapped : Core.StatusMapOpType.MachGroupMod, "");
+                        .FirstOrDefault();
+                    if (item2upd != null)
+                    {
+                        item2upd.State = newState;
+                        // Commit changes
+                        locallocalDbCtx.SaveChanges();
+                        done = true;
+                        // aggiorno info sullo status
+                        myStatusMapCtrl.UpdateAction("", ProdId, PartId, Core.StatusMapItemType.Part, newState == Core.ItemState.Scrapped ? Core.StatusMapOpType.SetPartScrapped : Core.StatusMapOpType.MachGroupMod, "");
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on Part.UpdateStart: req item was not found | ProdId {ProdId} | MachGroupId {MachGroupId} | PartId {PartId} | newState {newState}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
                 catch (Exception exc)
                 {

EgtBEAMWALL.DataLayer/Controllers/ProdController.cs

@@ -9,17 +9,11 @@ namespace EgtBEAMWALL.DataLayer.Controllers
 {
     public class ProdController : IDisposable
     {
-        #region Public Fields
-
-        public static ProdController man = new ProdController();
-
-        #endregion Public Fields
-
         #region Public Constructors
 
         public ProdController()
         {
-            Log.Info("ProdController istance Started");
+            Log.Info("ProdController instance Started");
         }
 
         #endregion Public Constructors
@@ -179,14 +173,75 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         }
 
         /// <summary>
-        /// Elenco progetti
+        /// Elenco prod
         /// </summary>
-        /// <param name="numRecord"></param>
+        /// <param name="numRecord">Num max record da recuperare</param>
+        /// <param name="OnlyActive">Solo con ALMENO 1 PROJ attivo (senza cancellazione logica)</param>
         /// <returns></returns>
-        public List<Core.ProdFileM> GetLastDesc(int numRecord)
+        public List<Core.ProdFileM> GetLastDesc(int numRecord, bool OnlyActive)
         {
             List<Core.ProdFileM> result = new List<Core.ProdFileM>();
-            var dbResult = GetLastDbModelDesc(numRecord);
+            //List<ProdModel> dbResult = GetLastDbModelDesc(numRecord);
+            List<ProdModel> dbResult = new List<ProdModel>();
+            using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
+            {
+                // se numRecord = 0 --> passo tutti
+                if (numRecord == 0)
+                {
+                    numRecord = localDbCtx.ProdList.Count();
+                }
+                // retrieve
+                dbResult = localDbCtx
+                    .ProdList
+                    // condizione join sui PROJ
+                    .Join(localDbCtx.ProjList.Where(x=> x.IsActive || !OnlyActive), 
+                        p => p.ProdDbId,
+                        e=> e.ProdDbId,
+                        (p,e) => p)
+                    .OrderByDescending(x => x.ProdId)
+                    .Take(numRecord)
+                    .ToList();
+            }
+
+            // conversione
+            result = dbResult.Select(x => Core.ProdFileM.CreateProdFileM(x.ProdId, ProjIdByProd(x.ProdId), x.DtCreated, x.Description, x.PType, x.Machine, x.LockedBy, x.LockDate)).ToList();
+            return result;
+        }
+
+        /// <summary>
+        /// Elenco prod
+        /// </summary>
+        /// <param name="dtStart">Inizio periodo estrazione</param>
+        /// <param name="dtEnd">Fine periodo estrazione</param>
+        /// <param name="numRecord">Num max record da recuperare</param>
+        /// <param name="OnlyActive">Solo con ALMENO 1 PROJ attivo (senza cancellazione logica)</param>
+        /// <returns></returns>
+        public List<Core.ProdFileM> GetLastDesc(DateTime dtStart, DateTime dtEnd, int numRecord, bool OnlyActive)
+        {
+            List<Core.ProdFileM> result = new List<Core.ProdFileM>();
+            //List<ProdModel> dbResult = GetLastDbModelDesc(numRecord);
+            List<ProdModel> dbResult = new List<ProdModel>();
+            using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
+            {
+                // se numRecord = 0 --> passo tutti
+                if (numRecord == 0)
+                {
+                    numRecord = localDbCtx.ProdList.Count();
+                }
+                // retrieve
+                dbResult = localDbCtx
+                    .ProdList
+                    .Where(x => x.DtCreated >= dtStart && x.DtCreated <= dtEnd)
+                    // condizione join sui PROJ
+                    .Join(localDbCtx.ProjList.Where(x => x.IsActive || !OnlyActive),
+                        p => p.ProdDbId,
+                        e => e.ProdDbId,
+                        (p, e) => p)
+                    .OrderByDescending(x => x.ProdId)
+                    .Take(numRecord)
+                    .ToList();
+            }
+
             // conversione
             result = dbResult.Select(x => Core.ProdFileM.CreateProdFileM(x.ProdId, ProjIdByProd(x.ProdId), x.DtCreated, x.Description, x.PType, x.Machine, x.LockedBy, x.LockDate)).ToList();
             return result;
@@ -353,25 +408,39 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             bool done = false;
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
-                var item2update = localDbCtx
-                                    .ProdList
-                                    .Where(x => x.ProdDbId == updItem.ProdDbId)
-                                    .SingleOrDefault();
                 try
                 {
-                    // update, vers 1...
-                    localDbCtx.Entry(item2update).CurrentValues.SetValues(updItem);
+                    var item2update = localDbCtx
+                                        .ProdList
+                                        .Where(x => x.ProdDbId == updItem.ProdDbId)
+                                        .SingleOrDefault();
 
-                    //// update, vers 2
-                    //localDbCtx.PartList.Remove(item2del);
-                    //localDbCtx.PartList.Add(updItem);
+                    if (item2update != null)
+                    {
+                        // update, vers 1...
+                        localDbCtx.Entry(item2update).CurrentValues.SetValues(updItem);
 
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-                    done = true;
+                        //// update, vers 2
+                        //localDbCtx.PartList.Remove(item2del);
+                        //localDbCtx.PartList.Add(updItem);
+
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on Prod.Update: req item was not found | ProdId {updItem.ProdId} | ProdDbId {updItem.ProdDbId} | Description {updItem.Description}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
+                }
+                catch (Exception exc)
+                {
+                    string errMessage = $"EXCEPTION on Prod.Update: {Environment.NewLine}{exc}";
+                    Console.WriteLine(errMessage);
+                    Log.Error(errMessage);
                 }
-                catch
-                { }
             }
             return done;
         }
@@ -384,137 +453,182 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// </summary>
         /// <param name="ProdId">Id del Prod</param>
         /// <param name="MachGroupList">Elenco MachGroup da associare</param>
-        /// <returns></returns>
-        public ProdModel UpdateMachGroup(int ProdId, List<Core.MyMachGroupM> MachGroupList)
+        /// <returns>Bool esecuzione con successo o meno</returns>
+        public bool UpdateMachGroup(int ProdId, List<Core.MyMachGroupM> MachGroupList)
         {
-            ProdModel currData = new ProdModel();
-            using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
+            bool testOk = false;
+            // calcolo occorrenze x ogni ID della barra...
+            var listaCheck = MachGroupList
+                                .GroupBy(x => x.Id)
+                                .Select(n => new
+                                {
+                                    PartId = n.Key,
+                                    PartCount = n.Count()
+                                })
+                                .OrderBy(n => n.PartCount);
+
+            // controllo: nell'elenco delle barre MachGroupList NON devono esserci duplicati per
+            // l'ID (esterno) che deve essere univoco...
+            testOk = listaCheck.Where(x => x.PartCount > 1).Count() == 0;
+            if (testOk)
             {
-                // Recupero il PROD nel contesto DB attuale
-                currData = localDbCtx
-                            .ProdList
-                            .Where(x => x.ProdId == ProdId)
-                            .SingleOrDefault();
-
-                try
+                ProdModel currData = new ProdModel();
+                using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
                 {
-                    // preparo elenco
-                    List<MachGroupModel> itemsMG2Add = new List<MachGroupModel>();
-
-                    List<Core.MyMachGroupM> MachGroupList2Add = new List<Core.MyMachGroupM>();
-                    List<PartModel> PartList2Add = new List<PartModel>();
-                    // cerco le MG esistenti --> aggiorno
-                    foreach (var item in MachGroupList)
+                    var myStatusMapCtrl = new StatusMapController();
+                    try
                     {
-                        var currMG = MachGroupController.man.FindByMachGroupId(ProdId, item.Id);
-                        var convCurrMG = MachGroupController.ConvertFromCore(item, currData.ProdDbId);
-                        if (currMG != null)
+                        // Recupero il PROD nel contesto DB attuale
+                        currData = localDbCtx
+                                    .ProdList
+                                    .Where(x => x.ProdId == ProdId)
+                                    .SingleOrDefault();
+
+                        if (currData != null)
                         {
-                            // se non identico x equality limitata a ViewOptim...
-                            if (!currMG.ViewOptimEquals(convCurrMG))
+                            // preparo elenco
+                            List<MachGroupModel> itemsMG2Add = new List<MachGroupModel>();
+
+                            List<Core.MyMachGroupM> MachGroupList2Add = new List<Core.MyMachGroupM>();
+                            List<PartModel> PartList2Add = new List<PartModel>();
+                            List<PartModel> PartList2Rem = new List<PartModel>();
+                            var logMGCtrl = new MachGroupController();
+                            // cerco le MG esistenti --> aggiorno
+                            foreach (var item in MachGroupList)
                             {
-                                // aggiorno con nuovi valori ricevuti
-                                currMG.H = convCurrMG.H;
-                                currMG.L = convCurrMG.L;
-                                currMG.W = convCurrMG.W;
-                                currMG.Material = convCurrMG.Material;
-                                currMG.Name = convCurrMG.Name;
-                                // salvo
-                                localDbCtx.SaveChanges();
-                                // registro modifica StatusMap
-                                StatusMapController.man.UpdateAction(currMG.SupervisorId, ProdId, currMG.MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupMod, "");
+                                var currMG = logMGCtrl.FindByMachGroupId(ProdId, item.Id);
+                                var convCurrMG = logMGCtrl.ConvertFromCore(item, currData.ProdDbId);
+                                if (currMG != null)
+                                {
+                                    // se non identico x equality limitata a ViewOptim...
+                                    if (!currMG.ViewOptimEquals(convCurrMG))
+                                    {
+                                        // aggiorno con nuovi valori ricevuti
+                                        currMG.H = convCurrMG.H;
+                                        currMG.L = convCurrMG.L;
+                                        currMG.W = convCurrMG.W;
+                                        currMG.Material = convCurrMG.Material;
+                                        currMG.Name = convCurrMG.Name;
+                                        // salvo
+                                        localDbCtx.SaveChanges();
+                                        // registro modifica StatusMap
+                                        myStatusMapCtrl.UpdateAction(currMG.SupervisorId, ProdId, currMG.MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupMod, "");
+                                    }
+                                }
+                                else
+                                {
+                                    itemsMG2Add.Add(convCurrMG);
+                                    // registro modifica StatusMap
+                                    myStatusMapCtrl.UpdateAction("", ProdId, item.Id, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupAdd, "");
+                                }
                             }
+                            // aggiungo MachGroup
+                            localDbCtx.MachGroupList.AddRange(itemsMG2Add);
+                            // Commit changes
+                            localDbCtx.SaveChanges();
+
+                            // verifico di nuovo l'elenco delle MG x le relative PART...
+                            foreach (var item in MachGroupList)
+                            {
+                                var currMG = logMGCtrl.FindByMachGroupId(ProdId, item.Id);
+                                int MachGroupDbId = currMG.MachGroupDbId;
+                                bool modMg = false;
+                                // 2023.05.10: recupero TUTTE le part del MachGroup e poi lavoro...
+                                var currMgPartList = localDbCtx
+                                                  .PartList
+                                                  .Where(x => x.MachGroup.Prod.ProdId == ProdId && x.MachGroup.MachGroupId == item.Id)
+                                                  .ToList();
+                                // preparo elenco PartList x eventuale rimozione
+                                var currPartList2Rem = new List<PartModel>();
+                                currPartList2Rem.AddRange(currMgPartList);
+                                // verifico se uguali o meno...
+                                foreach (var currPartM in item.PartMList)
+                                {
+                                    var myPartCtrl = new PartController();
+                                    var currPart = currMgPartList
+                                                      .Where(x => x.PartId == currPartM.nPartId)
+                                                      .SingleOrDefault();
+                                    var convCurrPartM = myPartCtrl.ConvertFromCore(currPartM, MachGroupDbId);
+                                    if (currPart != null)
+                                    {
+                                        // se non identico x equality limitata a ViewOptim...
+                                        if (!currPart.ViewOptimEquals(convCurrPartM))
+                                        {
+                                            // aggiorno con nuovi valori ricevuti
+                                            currPart.H = convCurrPartM.H;
+                                            currPart.L = convCurrPartM.L;
+                                            currPart.W = convCurrPartM.W;
+                                            currPart.Material = convCurrPartM.Material;
+                                            currPart.CALC_State = convCurrPartM.CALC_State;
+                                            currPart.ROT = convCurrPartM.ROT;
+                                            currPart.PDN = convCurrPartM.PDN;
+                                            currPart.NAM = convCurrPartM.NAM;
+                                            // aggiorno anche il BtlPartId
+                                            currPart.BTLPartDbId = convCurrPartM.BTLPartDbId;
+                                            // salvo
+                                            localDbCtx.SaveChanges();
+                                            modMg = true;
+                                        }
+                                        // tolgo da elenco di rimozione...
+                                        currPartList2Rem.Remove(currPart);
+                                    }
+                                    else
+                                    {
+                                        PartList2Add.Add(convCurrPartM);
+                                        modMg = true;
+                                    }
+                                }
+                                // verifico se salvare...
+                                if (modMg)
+                                {
+                                    myStatusMapCtrl.UpdateAction(currMG.SupervisorId, ProdId, currMG.MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupMod, "");
+                                }
+
+                                // aggiungo le part esistenti nel MG non ricevute...
+                                PartList2Rem.AddRange(currPartList2Rem);
+                            }
+                            // elimino parti da rimuovere..
+                            localDbCtx.PartList.RemoveRange(PartList2Rem);
+                            // aggiungo PartList
+                            localDbCtx.PartList.AddRange(PartList2Add);
+                            // Commit changes
+                            localDbCtx.SaveChanges();
+
+                            // sel dei MachGroup da prod OLD
+                            List<MachGroupModel> itemsMGOld = localDbCtx
+                                .MachGroupList
+                                .Where(x => x.Prod.ProdId == ProdId)
+                                .ToList();
+                            // elenco degli ID del MachGroup NON trovati
+                            List<int> MgId2rem = itemsMGOld.Select(x => x.MachGroupId).Except(MachGroupList.Select(y => y.Id)).ToList();
+                            // processo i MachGroup eliminati
+                            foreach (var item in MgId2rem)
+                            {
+                                logMGCtrl.Delete(ProdId, item);
+                            }
+
+                            // aggiorno valore isNew a false x PROD
+                            currData.IsNew = false;
+
+                            // Commit changes
+                            localDbCtx.SaveChanges();
                         }
                         else
                         {
-                            itemsMG2Add.Add(convCurrMG);
-                            // registro modifica StatusMap
-                            StatusMapController.man.UpdateAction("", ProdId, item.Id, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupAdd, "");
+                            string errMessage = $"ERROR on Prod.UpdateMachGroup: req item was not found | ProdId {ProdId} | MachGroupList {MachGroupList.Count} rec";
+                            Console.WriteLine(errMessage);
+                            Log.Error(errMessage);
                         }
                     }
-                    // aggiungo MachGroup
-                    localDbCtx.MachGroupList.AddRange(itemsMG2Add);
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-
-                    // verifico di nuovo l'elenco delle MG x le relative PART...
-                    foreach (var item in MachGroupList)
+                    catch (Exception exc)
                     {
-                        var currMG = MachGroupController.man.FindByMachGroupId(ProdId, item.Id);
-                        int MachGroupDbId = currMG.MachGroupDbId;
-                        bool modMg = false;
-                        // verifico se uguali o meno...
-                        foreach (var currPartM in item.PartMList)
-                        {
-                            var currPart = localDbCtx
-                              .PartList
-                              .Where(x => x.MachGroup.Prod.ProdId == ProdId && x.MachGroup.MachGroupId == item.Id && x.PartId == currPartM.nPartId)
-                              .SingleOrDefault();
-                            var convCurrPartM = PartController.ConvertFromCore(currPartM, MachGroupDbId);
-                            if (currPart != null)
-                            {
-                                // se non identico x equality limitata a ViewOptim...
-                                if (!currPart.ViewOptimEquals(convCurrPartM))
-                                {
-                                    // aggiorno con nuovi valori ricevuti
-                                    currPart.H = convCurrPartM.H;
-                                    currPart.L = convCurrPartM.L;
-                                    currPart.W = convCurrPartM.W;
-                                    currPart.Material = convCurrPartM.Material;
-                                    currPart.CALC_State = convCurrPartM.CALC_State;
-                                    currPart.ROT = convCurrPartM.ROT;
-                                    currPart.PDN = convCurrPartM.PDN;
-                                    currPart.NAM = convCurrPartM.NAM;
-                                    // salvo
-                                    localDbCtx.SaveChanges();
-                                    modMg = true;
-                                }
-                            }
-                            else
-                            {
-                                PartList2Add.Add(convCurrPartM);
-                                modMg = true;
-                            }
-                        }
-                        // verifico se salvare...
-                        if (modMg)
-                        {
-                            StatusMapController.man.UpdateAction(currMG.SupervisorId, ProdId, currMG.MachGroupId, Core.StatusMapItemType.MachGroup, Core.StatusMapOpType.MachGroupMod, "");
-                        }
+                        string errMessage = $"EXCEPTION on Prod.UpdateMachGroup: {Environment.NewLine}{exc}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
                     }
-
-                    // aggiungo PartList
-                    localDbCtx.PartList.AddRange(PartList2Add);
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-
-                    // sel dei MachGroup da prod OLD
-                    List<MachGroupModel> itemsMGOld = localDbCtx
-                        .MachGroupList
-                        .Where(x => x.Prod.ProdId == ProdId)
-                        .ToList();
-                    // elenco degli ID del MachGroup NON trovati
-                    List<int> MgId2rem = itemsMGOld.Select(x => x.MachGroupId).Except(MachGroupList.Select(y => y.Id)).ToList();
-                    // processo i MachGroup eliminati
-                    foreach (var item in MgId2rem)
-                    {
-                        MachGroupController.man.Delete(ProdId, item);
-                    }
-
-                    // aggiorno valore isNew a false x PROD
-                    currData.IsNew = false;
-
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-                }
-                catch (Exception exc)
-                {
-                    string errMessage = $"EXCEPTION on Prod.UpdateMachGroup: {Environment.NewLine}{exc}";
-                    Console.WriteLine(errMessage);
-                    Log.Error(errMessage);
                 }
             }
-            return currData;
+            return testOk;
         }
 
         /// <summary>
@@ -525,18 +639,36 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// <returns></returns>
         public Core.ProdFileM UpdateMachine(int ProdId, String Machine)
         {
-            ProdModel currData;
+            ProdModel currData = new ProdModel();
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
-                currData = localDbCtx
+                try
+                {
+                    currData = localDbCtx
                             .ProdList
                             .Where(x => x.ProdId == ProdId)
                             .SingleOrDefault();
-                // aggiorno valore BTL
-                currData.Machine = Machine;
+                    if (currData != null)
+                    {
+                        // aggiorno valore BTL
+                        currData.Machine = Machine;
 
-                // Commit changes
-                localDbCtx.SaveChanges();
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on Prod.UpdateMachine: req item was not found | ProdId {ProdId} | Machine {Machine}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
+                }
+                catch (Exception exc)
+                {
+                    string errMessage = $"EXCEPTION on Prod.UpdateMachine: {Environment.NewLine}{exc}";
+                    Console.WriteLine(errMessage);
+                    Log.Error(errMessage);
+                }
             }
             return coreConv(currData);
         }
@@ -549,18 +681,36 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// <returns></returns>
         public Core.ProdFileM UpdatePType(int ProdId, BWType PType)
         {
-            ProdModel currData;
+            ProdModel currData = new ProdModel();
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
-                currData = localDbCtx
+                try
+                {
+                    currData = localDbCtx
                             .ProdList
                             .Where(x => x.ProdId == ProdId)
                             .SingleOrDefault();
-                // aggiorno valore BTL
-                currData.PType = PType;
+                    if (currData != null)
+                    {
+                        // aggiorno valore BTL
+                        currData.PType = PType;
 
-                // Commit changes
-                localDbCtx.SaveChanges();
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on Prod.UpdatePType: req item was not found | ProdId {ProdId} | PType {PType}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
+                }
+                catch (Exception exc)
+                {
+                    string errMessage = $"EXCEPTION on Prod.UpdatePType: {Environment.NewLine}{exc}";
+                    Console.WriteLine(errMessage);
+                    Log.Error(errMessage);
+                }
             }
             return coreConv(currData);
         }
@@ -572,25 +722,40 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             string LockBy = "";
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
-                // seleziono il prod...
-                var currProd = localDbCtx
+                try
+                {
+                    // seleziono il prod...
+                    var currProd = localDbCtx
                                 .ProdList
                                 .Where(x => x.ProdId == ProdId)
                                 .FirstOrDefault();
 
-                if (currProd != null)
-                {
-                    LockBy = currProd.LockedBy;
-
-                    var currProj = localDbCtx
-                        .ProjList
-                        .Where(x => x.ProdDbId == currProd.ProdDbId)
-                        .ToList();
-
-                    if (currProj != null && string.IsNullOrEmpty(LockBy))
+                    if (currProd != null)
                     {
-                        LockBy = currProj.FirstOrDefault(x => !string.IsNullOrEmpty(x.LockedBy)).LockedBy;
+                        LockBy = currProd.LockedBy;
+
+                        var currProj = localDbCtx
+                            .ProjList
+                            .Where(x => x.ProdDbId == currProd.ProdDbId)
+                            .ToList();
+
+                        if (currProj != null && string.IsNullOrEmpty(LockBy))
+                        {
+                            LockBy = currProj.FirstOrDefault(x => !string.IsNullOrEmpty(x.LockedBy)).LockedBy;
+                        }
                     }
+                    else
+                    {
+                        string errMessage = $"ERROR on Prod.UserLockByProdId: req item was not found | ProdId {ProdId}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
+                }
+                catch (Exception exc)
+                {
+                    string errMessage = $"EXCEPTION on Prod.UserLockByProdId: {Environment.NewLine}{exc}";
+                    Console.WriteLine(errMessage);
+                    Log.Error(errMessage);
                 }
             }
             return LockBy;
@@ -611,6 +776,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             return answ;
         }
 
+#if false
         /// <summary>
         /// Get LAST paginated data from DB (DESC ordered)
         /// </summary>
@@ -632,11 +798,14 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                     .Take(numRecord)
                     .ToList();
             }
-        }
+        } 
+#endif
 
         protected List<int> ProjIdByProd(int ProdId)
         {
-            return DbManager.obj.ProjCtr.GetByProdAsc(ProdId).Select(y => y.nProjId).ToList();
+            var ProjCtr = new ProjController();
+            return ProjCtr.GetByProdAsc(ProdId).Select(y => y.nProjId).ToList();
+            //return DbManager.obj.ProjCtr.GetByProdAsc(ProdId).Select(y => y.nProjId).ToList();
         }
 
         #endregion Protected Methods

EgtBEAMWALL.DataLayer/Controllers/ProjController.cs

@@ -45,11 +45,12 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         }
 
         /// <summary>
-        /// Delete Proj on DB by ProjId
+        /// Delete Proj logically / on DB by ProjId
         /// </summary>
         /// <param name="ProjId"></param>
+        /// <param name="IsLogical"></param>
         /// <returns></returns>
-        public bool DeleteProj(int ProjId)
+        public bool DeleteProj(int ProjId, bool IsLogical)
         {
             bool done = false;
 
@@ -59,25 +60,45 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                                 .ProjList
                                 .Where(x => x.ProjId == ProjId)
                                 .SingleOrDefault();
-                // sel delle BTLParts da proj
-                var parts2del = localDbCtx
-                                    .BTLPartList
-                                    .Where(x => x.ProjDbId == currProj.ProjDbId);
 
-                try
+                if (IsLogical)
                 {
-                    // remove from database
-                    localDbCtx.BTLPartList.RemoveRange(parts2del);
-                    localDbCtx.ProjList.Remove(currProj);
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-                    done = true;
+                    try
+                    {
+                        currProj.IsActive = false;
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
+                    }
+                    catch (Exception exc)
+                    {
+                        string errMessage = $"EXCEPTION on Proj.DeleteProj (logical only): {Environment.NewLine}{exc}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
-                catch (Exception exc)
+                else
                 {
-                    string errMessage = $"EXCEPTION on Proj.DeleteProj: {Environment.NewLine}{exc}";
-                    Console.WriteLine(errMessage);
-                    Log.Error(errMessage);
+                    // sel delle BTLParts da proj
+                    var parts2del = localDbCtx
+                                        .BTLPartList
+                                        .Where(x => x.ProjDbId == currProj.ProjDbId);
+
+                    try
+                    {
+                        // remove from database
+                        localDbCtx.BTLPartList.RemoveRange(parts2del);
+                        localDbCtx.ProjList.Remove(currProj);
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
+                    }
+                    catch (Exception exc)
+                    {
+                        string errMessage = $"EXCEPTION on Proj.DeleteProj (on DB): {Environment.NewLine}{exc}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
                 }
             }
             return done;
@@ -91,8 +112,9 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// Get records filtered by BtlPartName matching regexp BtlFileName[_number]
         /// </summary>
         /// <param name="BtlFileName">Base name to search for (=starts by BtlFileName%)</param>
+        /// <param name="OnlyActive">Solo i record attivi (senza cancellazione logica)</param>
         /// <returns></returns>
-        public List<ProjModel> FindByBtlFileName(string BtlFileName)
+        public List<ProjModel> FindByBtlFileName(string BtlFileName, bool OnlyActive)
         {
             List<ProjModel> searchResult = new List<ProjModel>();
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
@@ -100,7 +122,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                 // in primi cerco il record "parent" generale, se non ci fosse inutile proseguire...
                 ProjModel parentRec = localDbCtx
                         .ProjList
-                        .Where(x => x.BTLFileName == BtlFileName)
+                        .Where(x => x.BTLFileName == BtlFileName && (!OnlyActive || x.IsActive))
                         .FirstOrDefault();
                 if (parentRec != null && parentRec.ProjId > 0)
                 {
@@ -109,7 +131,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                     // cerco eventuali dati "child" puliti
                     var childRec = localDbCtx
                             .ProjList
-                            .Where(x => x.BTLFileName.StartsWith(BtlFileName + "_"))
+                            .Where(x => x.BTLFileName.StartsWith(BtlFileName + "_") && (!OnlyActive || x.IsActive))
                             .ToList();
                     // faccio filtro con ricerca regexp x scartare "falsi positivi" come BtlFileName_nonNumero...
                     if (childRec.Count > 0)
@@ -180,7 +202,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// <summary>
         /// Get filtered data by ProdId (ASC ordered)
         /// </summary>
-        /// <param name="ProdDbId"></param>
+        /// <param name="ProdId"></param>
         /// <returns></returns>
         public List<Core.ProjFileM> GetByProdAsc(int ProdId)
         {
@@ -280,9 +302,12 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// <summary>
         /// Elenco progetti
         /// </summary>
-        /// <param name="numRecord"></param>
+        /// <param name="dtStart">Inizio periodo estrazione (per export date)</param>
+        /// <param name="dtEnd">Fine periodo estrazione (per export date)</param>
+        /// <param name="numRecord">Num max record da recuperare</param>
+        /// <param name="OnlyActive">Solo i record attivi (senza cancellazione logica)</param>
         /// <returns></returns>
-        public List<Core.ProjFileM> GetLastDesc(int numRecord)
+        public List<Core.ProjFileM> GetLastByExpDesc(DateTime dtStart, DateTime dtEnd, int numRecord, bool OnlyActive)
         {
             List<Core.ProjFileM> answ = new List<Core.ProjFileM>();
 
@@ -296,6 +321,69 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                 // retrieve
                 var dbRes = localDbCtx
                                 .ProjList
+                                .Where(x => (x.DtExported >= dtStart && x.DtExported <= dtEnd) && (!OnlyActive || x.IsActive))
+                                .OrderByDescending(x => x.ProjId)
+                                .Take(numRecord)
+                                .ToList();
+                // conversione
+                answ = dbRes.Select(x => coreConv(x)).ToList();
+            }
+            return answ;
+        }
+
+        /// <summary>
+        /// Elenco progetti
+        /// </summary>
+        /// <param name="numRecord">Num max record da recuperare</param>
+        /// <param name="OnlyActive">Solo i record attivi (senza cancellazione logica)</param>
+        /// <returns></returns>
+        public List<Core.ProjFileM> GetLastDesc(int numRecord, bool OnlyActive)
+        {
+            List<Core.ProjFileM> answ = new List<Core.ProjFileM>();
+
+            using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
+            {
+                // se numRecord = 0 --> passo tutti
+                if (numRecord == 0)
+                {
+                    numRecord = localDbCtx.ProjList.Count();
+                }
+                // retrieve
+                var dbRes = localDbCtx
+                                .ProjList
+                                .Where(x => (!OnlyActive || x.IsActive))
+                                .OrderByDescending(x => x.ProjId)
+                                .Take(numRecord)
+                                .ToList();
+                // conversione
+                answ = dbRes.Select(x => coreConv(x)).ToList();
+            }
+            return answ;
+        }
+
+        /// <summary>
+        /// Elenco progetti
+        /// </summary>
+        /// <param name="dtStart">Inizio periodo estrazione</param>
+        /// <param name="dtEnd">Fine periodo estrazione</param>
+        /// <param name="numRecord">Num max record da recuperare</param>
+        /// <param name="OnlyActive">Solo i record attivi (senza cancellazione logica)</param>
+        /// <returns></returns>
+        public List<Core.ProjFileM> GetLastDesc(DateTime dtStart, DateTime dtEnd, int numRecord, bool OnlyActive)
+        {
+            List<Core.ProjFileM> answ = new List<Core.ProjFileM>();
+
+            using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
+            {
+                // se numRecord = 0 --> passo tutti
+                if (numRecord == 0)
+                {
+                    numRecord = localDbCtx.ProjList.Count();
+                }
+                // retrieve
+                var dbRes = localDbCtx
+                                .ProjList
+                                .Where(x => (x.DtCreated >= dtStart && x.DtCreated <= dtEnd) && (!OnlyActive || x.IsActive))
                                 .OrderByDescending(x => x.ProjId)
                                 .Take(numRecord)
                                 .ToList();
@@ -341,6 +429,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                     {
                         ProjId = nextId,
                         BTLFileName = "",
+                        ProjDescription = "",
                         IsNew = true,
                         Locked = true,
                         LockedBy = UserKey,
@@ -452,22 +541,35 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                                     .ProjList
                                     .Where(x => x.ProjId == updItem.ProjId)
                                     .SingleOrDefault();
-                try
+                if (item2update != null)
                 {
-                    updItem.ProjDbId = item2update.ProjDbId;
-                    // update, vers 1...
-                    localDbCtx.Entry(item2update).CurrentValues.SetValues(updItem);
+                    try
+                    {
+                        updItem.ProjDbId = item2update.ProjDbId;
+                        // update, vers 1...
+                        localDbCtx.Entry(item2update).CurrentValues.SetValues(updItem);
 
-                    //// update, vers 2
-                    //dbCtx.PartList.Remove(item2del);
-                    //dbCtx.PartList.Add(updItem);
+                        //// update, vers 2
+                        //dbCtx.PartList.Remove(item2del);
+                        //dbCtx.PartList.Add(updItem);
 
-                    // Commit changes
-                    localDbCtx.SaveChanges();
-                    done = true;
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                        done = true;
+                    }
+                    catch (Exception exc)
+                    {
+                        string errMessage = $"EXCEPTION on Part.Update{Environment.NewLine}{exc}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
+                }
+                else
+                {
+                    string errMessage = $"ERROR on Proj.Update: req item was not found | ProjId {updItem.ProjId} | ProjDbId {updItem.ProjDbId} | ProdDbId {updItem.ProdDbId}";
+                    Console.WriteLine(errMessage);
+                    Log.Error(errMessage);
                 }
-                catch (Exception)
-                { }
             }
             return done;
         }
@@ -493,77 +595,84 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                                                     .BTLPartList
                                                     .Where(x => x.ProjDbId == currData.ProjDbId)
                                                     .ToList();
-
-                // converto le BtlParts da core --> DB
-                List<BTLPartModel> newBtlParts = BtlPartList.Select(x => BTLPartController.ConvertFromCore(x, currData.ProjDbId)).ToList();
-
-                try
+                if (oldBtlParts != null)
                 {
-                    // elementi BtlPartId NON + presenti da eliminare
-                    List<int> bpi2rem = oldBtlParts.Select(x => x.PartId).Except(newBtlParts.Select(y => y.PartId)).ToList();
-                    List<int> bpi2add = newBtlParts.Select(x => x.PartId).Except(oldBtlParts.Select(y => y.PartId)).ToList();
-                    List<int> bpiExis = newBtlParts.Select(x => x.PartId).Intersect(oldBtlParts.Select(y => y.PartId)).ToList();
+                    var locBtlCtrl = new BTLPartController();
+                    // converto le BtlParts da core --> DB
+                    List<BTLPartModel> newBtlParts = BtlPartList.Select(x => locBtlCtrl.ConvertFromCore(x, currData.ProjDbId)).ToList();
 
-                    // aggiorno existing...
-                    foreach (var currPartId in bpiExis)
+                    try
                     {
-                        // recupero item da aggiornare...
-                        var oldItem = oldBtlParts.Where(x => x.PartId == currPartId).FirstOrDefault();
-                        // dati nuovo item
-                        var newItem = newBtlParts.Where(x => x.PartId == currPartId).FirstOrDefault();
-                        if (newItem != null && oldItem != null)
+                        // elementi BtlPartId NON + presenti da eliminare
+                        List<int> bpi2rem = oldBtlParts.Select(x => x.PartId).Except(newBtlParts.Select(y => y.PartId)).ToList();
+                        List<int> bpi2add = newBtlParts.Select(x => x.PartId).Except(oldBtlParts.Select(y => y.PartId)).ToList();
+                        List<int> bpiExis = newBtlParts.Select(x => x.PartId).Intersect(oldBtlParts.Select(y => y.PartId)).ToList();
+
+                        // aggiorno existing...
+                        foreach (var currPartId in bpiExis)
                         {
-                            oldItem.CALC_State = newItem.CALC_State;
-                            oldItem.CNT = newItem.CNT;
-                            oldItem.DO = newItem.DO;
-                            oldItem.H = newItem.H;
-                            oldItem.L = newItem.L;
-                            oldItem.W = newItem.W;
-                            oldItem.Material = newItem.Material;
-                            oldItem.NAM = newItem.NAM;
-                            oldItem.PDN = newItem.PDN;
+                            // recupero item da aggiornare...
+                            var oldItem = oldBtlParts.Where(x => x.PartId == currPartId).FirstOrDefault();
+                            // dati nuovo item
+                            var newItem = newBtlParts.Where(x => x.PartId == currPartId).FirstOrDefault();
+                            if (newItem != null && oldItem != null)
+                            {
+                                oldItem.CALC_State = newItem.CALC_State;
+                                oldItem.CNT = newItem.CNT;
+                                oldItem.DO = newItem.DO;
+                                oldItem.H = newItem.H;
+                                oldItem.L = newItem.L;
+                                oldItem.W = newItem.W;
+                                oldItem.Material = newItem.Material;
+                                oldItem.NAM = newItem.NAM;
+                                oldItem.PDN = newItem.PDN;
+                            }
+                        }
+
+                        // aggiungo le nuove part
+                        foreach (var newPartId in bpi2add)
+                        {
+                            var newItem = newBtlParts.Where(x => x.PartId == newPartId).FirstOrDefault();
+                            localDbCtx.BTLPartList.Add(newItem);
+                        }
+
+                        // elimino dal DB i non + esistenti
+                        foreach (var oldPartId in bpi2rem)
+                        {
+                            // elimino parts nei MachGroup
+                            var oldIstPartList = localDbCtx.PartList.Where(x => x.BTLPart.PartId == oldPartId).ToList();
+                            localDbCtx.PartList.RemoveRange(oldIstPartList);
+                            // elimino BtlParts
+                            var oldItem = oldBtlParts.Where(x => x.PartId == oldPartId).FirstOrDefault();
+                            localDbCtx.BTLPartList.Remove(oldItem);
                         }
                     }
+                    catch
+                    { }
 
-                    // aggiungo le nuove part
-                    foreach (var newPartId in bpi2add)
-                    {
-                        var newItem = newBtlParts.Where(x => x.PartId == newPartId).FirstOrDefault();
-                        localDbCtx.BTLPartList.Add(newItem);
-                    }
+                    // aggiorno valore isNew a false
+                    currData.IsNew = false;
 
-                    // elimino dal DB i non + esistenti
-                    foreach (var oldPartId in bpi2rem)
-                    {
-                        // elimino parts nei MachGroup
-                        var oldIstPartList = localDbCtx.PartList.Where(x => x.BTLPart.PartId == oldPartId).ToList();
-                        localDbCtx.PartList.RemoveRange(oldIstPartList);
-                        // elimino BtlParts
-                        var oldItem = oldBtlParts.Where(x => x.PartId == oldPartId).FirstOrDefault();
-                        localDbCtx.BTLPartList.Remove(oldItem);
-                    }
+                    // Commit changes
+                    localDbCtx.SaveChanges();
+                }
+                else
+                {
+                    string errMessage = $"ERROR on Proj.UpdateBtlParts: req item was not found | ProjId {ProjId} | BtlPartList {BtlPartList.Count} items";
+                    Console.WriteLine(errMessage);
+                    Log.Error(errMessage);
                 }
-                catch
-                { }
-
-                // aggiorno valore isNew a false
-                currData.IsNew = false;
-
-                // Commit changes
-                localDbCtx.SaveChanges();
             }
             return currData;
         }
 
         /// <summary>
-        /// Update record su DB x nomeBTL, ListName, ExportDate
+        /// Update record su DB x Description
         /// </summary>
         /// <param name="ProjId"></param>
-        /// <param name="BTLFileName"></param>
-        /// <param name="ListName"></param>
-        /// <param name="DtExported"></param>
+        /// <param name="Description"></param>
         /// <returns></returns>
-        public Core.ProjFileM UpdateInfo(int ProjId, string BTLFileName, string ListName, DateTime DtExported, BWType PType, string Machine)
+        public Core.ProjFileM UpdateDescription(int ProjId, string Description)
         {
             // cerco specifico Proj
             ProjModel currData;
@@ -573,50 +682,120 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                                .ProjList
                                .Where(x => x.ProjId == ProjId)
                                .SingleOrDefault();
-
-                // 2022.01.24: verifico UNIVOCITA' nel nome del file: SE fosse duplicato --> nuovo
-                // nome, nel formato nomeOriginale_idx, dove idx è il contatore libero successivo
-                var duplicateList = FindByBtlFileName(BTLFileName);
-                // devo verificare SOLO SE la lista non è vuota
-                if (duplicateList != null && duplicateList.Count > 0)
+                if (currData != null)
                 {
-                    // se ne ho esattamente 1 nel DB allora DEVE essere il record Parent
-                    if (duplicateList.Count == 1)
+                    try
                     {
-                        // verifico se ProjId variato
-                        if (!duplicateList[0].ProjId.Equals(currData.ProjId))
-                        {
-                            // in questo caso ho il PRIMO duplicato
-                            BTLFileName = $"{BTLFileName}_1";
-                        }
+                        // aggiorno valore BTL
+                        currData.ProjDescription = Description;
+
+                        // Commit changes
+                        localDbCtx.SaveChanges();
                     }
-                    // se ne ho + di 1 --> so che il maxId interno avrò il valore ULTIMO x prendere
-                    // il successivo
-                    else
+                    catch (Exception exc)
                     {
-                        var lastRec = duplicateList.OrderByDescending(x => x.ProjDbId).FirstOrDefault();
-                        // cerco indice
-                        string maybeNumber = lastRec.BTLFileName.Replace($"{BTLFileName}_", "");
-                        int index = 0;
-                        bool isNumber = int.TryParse(maybeNumber, out index);
-                        // fasccio comunque verifica sia numerico
-                        if (isNumber)
-                        {
-                            // in questo caso ho il l'ULTIMO duplicato e faccio +1
-                            BTLFileName = $"{BTLFileName}_{index + 1}";
-                        }
+                        string errMessage = $"EXCEPTION on Part.UpdateDescription:{Environment.NewLine}{exc}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
                     }
                 }
+                else
+                {
+                    string errMessage = $"ERROR on Proj.UpdateDescription: req item was not found | ProjId {ProjId} | Description {Description}";
+                    Console.WriteLine(errMessage);
+                    Log.Error(errMessage);
+                }
+            }
 
-                // aggiorno valore BTL
-                currData.BTLFileName = BTLFileName;
-                currData.DtExported = DtExported;
-                currData.ListName = ListName;
-                currData.PType = PType;
-                currData.Machine = Machine;
+            return coreConv(currData);
+        }
 
-                // Commit changes
-                localDbCtx.SaveChanges();
+        /// <summary>
+        /// Update record su DB x nomeBTL, ListName, ExportDate
+        /// </summary>
+        /// <param name="ProjId"></param>
+        /// <param name="BTLFileName"></param>
+        /// <param name="Description"></param>
+        /// <param name="ListName"></param>
+        /// <param name="DtExported"></param>
+        /// <param name="PType"></param>
+        /// <param name="Machine"></param>
+        /// <returns></returns>
+        public Core.ProjFileM UpdateInfo(int ProjId, string BTLFileName, string Description, string ListName, DateTime DtExported, BWType PType, string Machine)
+        {
+            // cerco specifico Proj
+            ProjModel currData;
+            using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
+            {
+                currData = localDbCtx
+                               .ProjList
+                               .Where(x => x.ProjId == ProjId)
+                               .SingleOrDefault();
+                if (currData != null)
+                {
+                    try
+                    {
+                        // 2022.01.24: verifico UNIVOCITA' nel nome del file: SE fosse duplicato -->
+                        // nuovo nome, nel formato nomeOriginale_idx, dove idx è il contatore libero
+                        // successivo 2023.06.08: lasciato come prima, anche NON attivi
+                        // (cancellazione logica)
+                        var duplicateList = FindByBtlFileName(BTLFileName, false);
+                        // devo verificare SOLO SE la lista non è vuota
+                        if (duplicateList != null && duplicateList.Count > 0)
+                        {
+                            // se ne ho esattamente 1 nel DB allora DEVE essere il record Parent
+                            if (duplicateList.Count == 1)
+                            {
+                                // verifico se ProjId variato
+                                if (!duplicateList[0].ProjId.Equals(currData.ProjId))
+                                {
+                                    // in questo caso ho il PRIMO duplicato
+                                    BTLFileName = $"{BTLFileName}_1";
+                                }
+                            }
+                            // se ne ho + di 1 --> so che il maxId interno avrò il valore ULTIMO x
+                            // prendere il successivo
+                            else
+                            {
+                                var lastRec = duplicateList.OrderByDescending(x => x.ProjDbId).FirstOrDefault();
+                                // cerco indice
+                                string maybeNumber = lastRec.BTLFileName.Replace($"{BTLFileName}_", "");
+                                int index = 0;
+                                bool isNumber = int.TryParse(maybeNumber, out index);
+                                // fasccio comunque verifica sia numerico
+                                if (isNumber)
+                                {
+                                    // in questo caso ho il l'ULTIMO duplicato e faccio +1
+                                    BTLFileName = $"{BTLFileName}_{index + 1}";
+                                }
+                            }
+                        }
+
+                        // aggiorno valore BTL
+                        currData.BTLFileName = BTLFileName;
+                        // aggiorno il resto
+                        currData.ProjDescription = Description;
+                        currData.DtExported = DtExported;
+                        currData.ListName = ListName;
+                        currData.PType = PType;
+                        currData.Machine = Machine;
+
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                    }
+                    catch (Exception exc)
+                    {
+                        string errMessage = $"EXCEPTION on Part.UpdateInfo:{Environment.NewLine}{exc}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
+                }
+                else
+                {
+                    string errMessage = $"ERROR on Proj.UpdateInfo: req item was not found | ProjId {ProjId} | Description {BTLFileName} | ListName {ListName} | DtExported {DtExported} | PType {PType} | Machine {Machine}";
+                    Console.WriteLine(errMessage);
+                    Log.Error(errMessage);
+                }
             }
 
             return coreConv(currData);
@@ -630,18 +809,36 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// <returns></returns>
         public Core.ProjFileM UpdateListName(int ProjId, string ListName)
         {
-            ProjModel currData;
+            ProjModel currData = new ProjModel();
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
-                currData = localDbCtx
-                               .ProjList
-                               .Where(x => x.ProjId == ProjId)
-                               .SingleOrDefault();
-                // aggiorno valore BTL
-                currData.ListName = ListName;
+                try
+                {
+                    currData = localDbCtx
+                                   .ProjList
+                                   .Where(x => x.ProjId == ProjId)
+                                   .SingleOrDefault();
+                    if (currData != null)
+                    {
+                        // aggiorno valore BTL
+                        currData.ListName = ListName;
 
-                // Commit changes
-                localDbCtx.SaveChanges();
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on Proj.UpdateListName: req item was not found | ProjId {ProjId} | ListName {ListName}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
+                }
+                catch (Exception exc)
+                {
+                    string errMessage = $"EXCEPTION on Part.UpdateListName:{Environment.NewLine}{exc}";
+                    Console.WriteLine(errMessage);
+                    Log.Error(errMessage);
+                }
             }
             return coreConv(currData);
         }
@@ -654,18 +851,37 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// <returns></returns>
         public Core.ProjFileM UpdateMachine(int ProjId, String Machine)
         {
-            ProjModel currData;
+            ProjModel currData = new ProjModel();
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
-                currData = localDbCtx
+                try
+                {
+                    currData = localDbCtx
                                .ProjList
                                .Where(x => x.ProjId == ProjId)
                                .SingleOrDefault();
-                // aggiorno valore BTL
-                currData.Machine = Machine;
 
-                // Commit changes
-                localDbCtx.SaveChanges();
+                    if (currData != null)
+                    {
+                        // aggiorno valore BTL
+                        currData.Machine = Machine;
+
+                        // Commit changes
+                        localDbCtx.SaveChanges();
+                    }
+                    else
+                    {
+                        string errMessage = $"ERROR on Proj.UpdateMachine: req item was not found | ProjId {ProjId} | Machine {Machine}";
+                        Console.WriteLine(errMessage);
+                        Log.Error(errMessage);
+                    }
+                }
+                catch (Exception exc)
+                {
+                    string errMessage = $"EXCEPTION on Part.UpdateMachine:{Environment.NewLine}{exc}";
+                    Console.WriteLine(errMessage);
+                    Log.Error(errMessage);
+                }
             }
             return coreConv(currData);
         }
@@ -684,7 +900,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             Core.ProjFileM answ = null;
             if (currProj != null)
             {
-                answ = Core.ProjFileM.CreateProjFileM(currProj.ProjId, ProdIdByProdDbId(currProj.ProdDbId), currProj.DtCreated, currProj.DtExported, currProj.ListName, currProj.BTLFileName, currProj.IsNew, currProj.Locked, currProj.PType, currProj.Machine);
+                answ = Core.ProjFileM.CreateProjFileM(currProj.ProjId, ProdIdByProdDbId(currProj.ProdDbId), currProj.DtCreated, currProj.DtExported, currProj.ListName, currProj.BTLFileName, currProj.ProjDescription, currProj.IsNew, currProj.Locked, currProj.PType, currProj.Machine);
             }
             return answ;
         }

EgtBEAMWALL.DataLayer/Controllers/StatusMapController.cs

@@ -8,15 +8,6 @@ namespace EgtBEAMWALL.DataLayer.Controllers
 {
     public class StatusMapController : IDisposable
     {
-        #region Public Fields
-
-        /// <summary>
-        /// Oggetto statico per gestione chiamate da altre classi
-        /// </summary>
-        public static StatusMapController man = new StatusMapController();
-
-        #endregion Public Fields
-
         #region Public Constructors
 
         public StatusMapController()

EgtBEAMWALL.DataLayer/DatabaseModels/PartModel.cs

@@ -97,6 +97,8 @@ namespace EgtBEAMWALL.DataLayer.DatabaseModels
             if (!(obj is PartModel item))
                 return false;
 
+            if (BTLPartDbId != item.BTLPartDbId)
+                return false;
             if (H != item.H)
                 return false;
             if (L != item.L)

EgtBEAMWALL.DataLayer/DatabaseModels/ProjModel.cs

@@ -1,7 +1,4 @@
 using System;
-using System.Collections.Generic;
-using System.Linq;
-using System.Text;
 using System.ComponentModel.DataAnnotations;
 using System.ComponentModel.DataAnnotations.Schema;
 using static EgtBEAMWALL.Core.ConstBeam;
@@ -31,6 +28,12 @@ namespace EgtBEAMWALL.DataLayer.DatabaseModels
         [Column("DtExported")]
         public DateTime DtExported { get; set; }
 
+        /// <summary>
+        /// Record attivo (se false == cancellazione logica)
+        /// </summary>
+        [Column("IsActive")]
+        public bool IsActive { get; set; } = true;
+
         /// <summary>
         /// Stato NEW = creato ma NON salvato
         /// </summary>
@@ -43,6 +46,13 @@ namespace EgtBEAMWALL.DataLayer.DatabaseModels
         [Column("ListName")]
         public string ListName { get; set; } = "";
 
+        /// <summary>
+        /// DataOra ultima operazione di Lock (o di rimozione di lock), quando aperto da un
+        /// dispositivo in rete
+        /// </summary>
+        [Column("LockDate")]
+        public DateTime LockDate { get; set; } = DateTime.MinValue;
+
         /// <summary>
         /// Stato locked (quando aperto da un dispositivo in rete)
         /// </summary>
@@ -55,12 +65,6 @@ namespace EgtBEAMWALL.DataLayer.DatabaseModels
         [Column("LockedBy")]
         public string LockedBy { get; set; } = "";
 
-        /// <summary>
-        /// DataOra ultima operazione di Lock (o di rimozione di lock), quando aperto da un dispositivo in rete
-        /// </summary>
-        [Column("LockDate")]
-        public DateTime LockDate { get; set; } = DateTime.MinValue;
-
         /// <summary>
         /// Macchina
         /// </summary>
@@ -76,6 +80,12 @@ namespace EgtBEAMWALL.DataLayer.DatabaseModels
         [Key, Column("ProjDbId"), DatabaseGenerated(DatabaseGeneratedOption.Identity)]
         public int ProjDbId { get; set; }
 
+        /// <summary>
+        /// Descrizione progetto (copiata da BTLFileName inizialmente)
+        /// </summary>
+        [Column("ProjDescription")]
+        public string ProjDescription { get; set; } = "";
+
         [Column("Id")]
         public int ProjId { get; set; }
 

EgtBEAMWALL.DataLayer/DbConfig.cs

@@ -1,5 +1,10 @@
-using System.IO;
+using Ionic.Zip;
+using System;
+using System.Diagnostics;
+using System.IO;
+using System.Linq;
 using System.Reflection;
+using System.Xml.Linq;
 
 namespace EgtBEAMWALL.DataLayer
 {
@@ -16,6 +21,7 @@ namespace EgtBEAMWALL.DataLayer
         public static string DATABASE_SERV = "127.0.0.1";
 
         public static string DATABASE_USER = "EgtUser";
+        public static string ZIP_PWD = "viacremasca-viacremasca-viacremasca-viacremasca";
 
         #endregion Public Fields
 
@@ -27,7 +33,7 @@ namespace EgtBEAMWALL.DataLayer
         public static string ADMIN_CONNECTION_STRING { get; set; } = "";
 
         /// <summary>
-        /// DB Connection string
+        /// DB Connection string, per effettuare migration riportare valore connessione admin cablato
         /// </summary>
         public static string CONNECTION_STRING { get; set; } = "";
 
@@ -71,12 +77,168 @@ namespace EgtBEAMWALL.DataLayer
             return Controllers.DbController.man.refreshViews(DATABASE_NAME);
         }
 
+        /// <summary>
+        /// Effettua DUMP del DB dato utente admin + percorso salvataggio (zip cifrato)
+        /// </summary>
+        /// <param name="zipFilePath">Percorso di salvataggio del dump (*.zip)</param>
+        /// <param name="dbName">Nome del DB da processare (se vuoto quello di default calcolato)</param>
+        /// <param name="mysqlDumpPath">Nome o Percorso Eseguibile mysqldump (opzionale)</param>
+        /// <param name="exportOpt">Opzioni in fase di export (default: --skip-extended-insert)</param>
+        /// <returns></returns>
+        public static bool DataBaseDumpToFile(string zipFilePath, string dbName = "", string mysqlDumpPath = "mysqldump", string exportOpt = "--skip-extended-insert")
+        {
+            bool fatto = false;
+            // fix path eseguibile
+            if (string.IsNullOrEmpty(mysqlDumpPath))
+            {
+                mysqlDumpPath = "mysqldump";
+            }
+            if (string.IsNullOrEmpty(dbName))
+            {
+                dbName = DATABASE_NAME;
+            }
+            // verifica zip finale
+            if (!zipFilePath.EndsWith(".zip"))
+            {
+                zipFilePath = $"{zipFilePath}.zip";
+            }
+            // creo nome file per export sql (temporaneo)
+            string tempSqlPath = zipFilePath.Replace(".zip", ".sql");
+            // esecuzione script x dump del DB
+            string dirPath = Path.GetDirectoryName(zipFilePath);
+            if (!Directory.Exists(dirPath))
+            {
+                Directory.CreateDirectory(dirPath);
+            }
+            // se ci fosse già file elimino (sql/zip)
+            if (File.Exists(tempSqlPath))
+            {
+                File.Delete(tempSqlPath);
+            }
+            if (File.Exists(zipFilePath))
+            {
+                File.Delete(zipFilePath);
+            }
+            // creazione SQL, tramite  script esterno... importante parametro "--skip-extended-insert" altrimenti problemi con restore (anche se + verboso e lento in backup...)
+            string callScript = $"\"{mysqlDumpPath}\" -u{DATABASE_USER}  -p{DATABASE_PWD} {dbName} {exportOpt} > {tempSqlPath}";
+            ExecuteCommand(callScript);
+            // compressione con pwd!
+            using (ZipFile zip = new ZipFile())
+            {
+                // aggiungo pwd
+                zip.Password = ZIP_PWD;
+                // inserisco file
+                zip.AddFile(tempSqlPath, "");
+                zip.Save(zipFilePath);
+                fatto = true;
+            }
+            // elimino file sql temporaneo...
+            if (File.Exists(tempSqlPath))
+            {
+                File.Delete(tempSqlPath);
+            }
+            return fatto;
+        }
+
+        /// <summary>
+        /// Effettua restore come overwrite del DB di DEFAULT... irreversibile
+        /// </summary>
+        /// <param name="zipFilePath">Percorso di lettura del dump cifrato (*.zip)</param>
+        /// <param name="dbName">Nome del DB da processare (se vuoto quello di default calcolato)</param>
+        /// <param name="tempFolder">Percorso cartella temp x esecuzione</param>
+        /// <param name="mysqlPath">Nome o Percorso Eseguibile mysql (opzionale)</param>
+        /// <param name="importOpt">Opzioni in fase di import (default: --force)</param>
+        /// <returns></returns>
+        public static bool DataBaseRestoreFromFile(string zipFilePath, string dbName = "", string tempFolder="", string mysqlPath = "mysql", string importOpt = "--force")
+        {
+            bool fatto = false;
+            // fix path eseguibile
+            if (string.IsNullOrEmpty(mysqlPath))
+            {
+                mysqlPath = "mysql";
+            }
+            if (string.IsNullOrEmpty(dbName))
+            {
+                dbName = DATABASE_NAME;
+            }
+            if (string.IsNullOrEmpty(tempFolder))
+            {
+                tempFolder = "C:\\Temp";
+            }
+            // verifica zip finale
+            if (!zipFilePath.EndsWith(".zip"))
+            {
+                zipFilePath = $"{zipFilePath}.zip";
+            }
+            // elimino eventuale temp folder precedente...
+            if (Directory.Exists(tempFolder))
+            {
+                Directory.Delete(tempFolder, true);
+            }
+            Directory.CreateDirectory(tempFolder);
+            // scompatto file zip --> sql
+            using (ZipFile zip = ZipFile.Read(zipFilePath))
+            {
+                zip.Password = ZIP_PWD;
+                zip.ExtractAll(tempFolder, ExtractExistingFileAction.OverwriteSilently);
+            }
+            // verifico che ci sia 1 file sql...
+            var sqlFiles = Directory.GetFiles(tempFolder, "*.sql");
+            if (sqlFiles != null && sqlFiles.Length == 1)
+            {
+                // verifico nome file per export sql (temporaneo)
+                string tempSqlPath = sqlFiles.FirstOrDefault();
+                // chiamo script esterno...
+                string callScript = $"\"{mysqlPath}\" -u{DATABASE_USER}  -p{DATABASE_PWD} {importOpt} {dbName} < {tempSqlPath}";
+                ExecuteCommand(callScript);
+                // elimino il file sql importato...
+                File.Delete(tempSqlPath);
+                // elimino temp folder...
+                Directory.Delete(tempFolder, true);
+                fatto = true;
+            }
+            return fatto;
+        }
+
+        /// <summary>
+        /// Esecuzione di un comando esterno
+        /// </summary>
+        /// <param name="command"></param>
+        public static void ExecuteCommand(string command)
+        {
+            int exitCode;
+            ProcessStartInfo processInfo;
+            Process process;
+
+            processInfo = new ProcessStartInfo("cmd.exe", "/c " + command);
+            processInfo.CreateNoWindow = true;
+            processInfo.UseShellExecute = false;
+            // *** Redirect the output ***
+            processInfo.RedirectStandardError = true;
+            processInfo.RedirectStandardOutput = true;
+
+            process = Process.Start(processInfo);
+            process.WaitForExit();
+
+            // *** Read the streams ***
+            // Warning: This approach can lead to deadlocks, see Edit #2
+            string output = process.StandardOutput.ReadToEnd();
+            string error = process.StandardError.ReadToEnd();
+
+            exitCode = process.ExitCode;
+
+            Console.WriteLine("output>>" + (String.IsNullOrEmpty(output) ? "(none)" : output));
+            Console.WriteLine("error>>" + (String.IsNullOrEmpty(error) ? "(none)" : error));
+            Console.WriteLine("ExitCode: " + exitCode.ToString(), "ExecuteCommand");
+            process.Close();
+        }
+
         /// <summary>
         /// Metodo di init standard per DB in rete con Master_Key
         /// </summary>
         /// <param name="server">Indirizzo del server (tipicamente indirizzo di rete)</param>
         /// <param name="nKey">Numero chiave</param>
-        /// <param name="sKey">Codice/pwd associato a chaive</param>
+        /// <param name="sKey">Codice/pwd associato a chiave</param>
         /// <param name="masterKey">Numero di chiave master con cui è creato il DB</param>
         public static void InitDb(string server, string nKey, string sKey, string masterKey = "")
         {
@@ -86,6 +248,7 @@ namespace EgtBEAMWALL.DataLayer
             DATABASE_NAME = $"EgtBwDb_{masterKey}";
             DATABASE_USER = $"user_{nKey}";
             DATABASE_PWD = $"pwd_{sKey}";
+            ZIP_PWD = $"{DATABASE_USER}:{DATABASE_PWD}:{DATABASE_USER}:{DATABASE_PWD}";
             CONNECTION_STRING = $"server={DATABASE_SERV};port=3306;database={DATABASE_NAME};uid={DATABASE_USER};pwd={DATABASE_PWD};SslMode=None";
             // stringa admin con utente root egalware...
             ADMIN_CONNECTION_STRING = $"server={DATABASE_SERV};port=3306;database=mysql;uid=root;pwd=Egalware_24068!;SslMode=none;CHARSET=utf8";

EgtBEAMWALL.DataLayer/DbManager.cs

@@ -9,7 +9,6 @@ namespace EgtBEAMWALL.DataLayer
     {
         #region Public Fields
 
-        public static DbManager obj = new DbManager();
         public Controllers.BTLPartController BtlPartCtr = new Controllers.BTLPartController();
         public Controllers.LogMachineController LogMacCtr = new Controllers.LogMachineController();
         public Controllers.LogSupportController LogSupCtr = new Controllers.LogSupportController();

EgtBEAMWALL.DataLayer/EgtBEAMWALL.DataLayer.csproj

@@ -37,8 +37,11 @@
     <Prefer32Bit>false</Prefer32Bit>
   </PropertyGroup>
   <ItemGroup>
-    <Reference Include="BouncyCastle.Crypto, Version=1.8.5.0, Culture=neutral, PublicKeyToken=0e99375e54769942">
-      <HintPath>..\packages\BouncyCastle.1.8.5\lib\BouncyCastle.Crypto.dll</HintPath>
+    <Reference Include="BouncyCastle.Crypto, Version=1.9.0.0, Culture=neutral, PublicKeyToken=0e99375e54769942, processorArchitecture=MSIL">
+      <HintPath>..\packages\Portable.BouncyCastle.1.9.0\lib\net40\BouncyCastle.Crypto.dll</HintPath>
+    </Reference>
+    <Reference Include="DotNetZip, Version=1.16.0.0, Culture=neutral, PublicKeyToken=6583c7c814667745, processorArchitecture=MSIL">
+      <HintPath>..\packages\DotNetZip.1.16.0\lib\net40\DotNetZip.dll</HintPath>
     </Reference>
     <Reference Include="EgtWPFLib5">
       <HintPath>..\ExtLibs\EgtWPFLib5.dll</HintPath>
@@ -49,17 +52,17 @@
     <Reference Include="EntityFramework.SqlServer, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL">
       <HintPath>..\packages\EntityFramework.6.4.4\lib\net45\EntityFramework.SqlServer.dll</HintPath>
     </Reference>
-    <Reference Include="Google.Protobuf, Version=3.19.4.0, Culture=neutral, PublicKeyToken=a7d26565bac4d604, processorArchitecture=MSIL">
-      <HintPath>..\packages\Google.Protobuf.3.19.4\lib\net45\Google.Protobuf.dll</HintPath>
+    <Reference Include="Google.Protobuf, Version=3.21.9.0, Culture=neutral, PublicKeyToken=a7d26565bac4d604, processorArchitecture=MSIL">
+      <HintPath>..\packages\Google.Protobuf.3.21.9\lib\net45\Google.Protobuf.dll</HintPath>
     </Reference>
-    <Reference Include="K4os.Compression.LZ4, Version=1.2.6.0, Culture=neutral, PublicKeyToken=2186fa9121ef231d, processorArchitecture=MSIL">
-      <HintPath>..\packages\K4os.Compression.LZ4.1.2.6\lib\net46\K4os.Compression.LZ4.dll</HintPath>
+    <Reference Include="K4os.Compression.LZ4, Version=1.3.5.0, Culture=neutral, PublicKeyToken=2186fa9121ef231d, processorArchitecture=MSIL">
+      <HintPath>..\packages\K4os.Compression.LZ4.1.3.5\lib\net462\K4os.Compression.LZ4.dll</HintPath>
     </Reference>
-    <Reference Include="K4os.Compression.LZ4.Streams, Version=1.2.6.0, Culture=neutral, PublicKeyToken=2186fa9121ef231d, processorArchitecture=MSIL">
-      <HintPath>..\packages\K4os.Compression.LZ4.Streams.1.2.6\lib\net46\K4os.Compression.LZ4.Streams.dll</HintPath>
+    <Reference Include="K4os.Compression.LZ4.Streams, Version=1.3.5.0, Culture=neutral, PublicKeyToken=2186fa9121ef231d, processorArchitecture=MSIL">
+      <HintPath>..\packages\K4os.Compression.LZ4.Streams.1.3.5\lib\net462\K4os.Compression.LZ4.Streams.dll</HintPath>
     </Reference>
-    <Reference Include="K4os.Hash.xxHash, Version=1.0.6.0, Culture=neutral, PublicKeyToken=32cd54395057cec3, processorArchitecture=MSIL">
-      <HintPath>..\packages\K4os.Hash.xxHash.1.0.6\lib\net46\K4os.Hash.xxHash.dll</HintPath>
+    <Reference Include="K4os.Hash.xxHash, Version=1.0.8.0, Culture=neutral, PublicKeyToken=32cd54395057cec3, processorArchitecture=MSIL">
+      <HintPath>..\packages\K4os.Hash.xxHash.1.0.8\lib\net462\K4os.Hash.xxHash.dll</HintPath>
     </Reference>
     <Reference Include="MySql.Data, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d, processorArchitecture=MSIL">
       <HintPath>..\packages\MySql.Data.8.0.21\lib\net452\MySql.Data.dll</HintPath>
@@ -88,20 +91,26 @@
     <Reference Include="System.Drawing" />
     <Reference Include="System.Drawing.Design" />
     <Reference Include="System.IO.Compression" />
+    <Reference Include="System.IO.Pipelines, Version=5.0.0.2, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.IO.Pipelines.5.0.2\lib\net461\System.IO.Pipelines.dll</HintPath>
+    </Reference>
     <Reference Include="System.Management" />
-    <Reference Include="System.Memory, Version=4.0.1.1, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
-      <HintPath>..\packages\System.Memory.4.5.4\lib\net461\System.Memory.dll</HintPath>
+    <Reference Include="System.Memory, Version=4.0.1.2, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.Memory.4.5.5\lib\net461\System.Memory.dll</HintPath>
     </Reference>
     <Reference Include="System.Numerics" />
     <Reference Include="System.Numerics.Vectors, Version=4.1.4.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
       <HintPath>..\packages\System.Numerics.Vectors.4.5.0\lib\net46\System.Numerics.Vectors.dll</HintPath>
     </Reference>
-    <Reference Include="System.Runtime.CompilerServices.Unsafe, Version=5.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
-      <HintPath>..\packages\System.Runtime.CompilerServices.Unsafe.5.0.0\lib\net45\System.Runtime.CompilerServices.Unsafe.dll</HintPath>
+    <Reference Include="System.Runtime.CompilerServices.Unsafe, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.Runtime.CompilerServices.Unsafe.6.0.0\lib\net461\System.Runtime.CompilerServices.Unsafe.dll</HintPath>
     </Reference>
     <Reference Include="System.Security" />
     <Reference Include="System.ServiceModel" />
     <Reference Include="System.ServiceProcess" />
+    <Reference Include="System.Threading.Tasks.Extensions, Version=4.2.0.1, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.Threading.Tasks.Extensions.4.5.4\lib\net461\System.Threading.Tasks.Extensions.dll</HintPath>
+    </Reference>
     <Reference Include="System.Transactions" />
     <Reference Include="System.Xml.Linq" />
     <Reference Include="System.Data.DataSetExtensions" />
@@ -166,6 +175,10 @@
     <Compile Include="Migrations\202207051703296_UpgradeLockModel.designer.cs">
       <DependentUpon>202207051703296_UpgradeLockModel.cs</DependentUpon>
     </Compile>
+    <Compile Include="Migrations\202306081452095_UpdateProjModel.cs" />
+    <Compile Include="Migrations\202306081452095_UpdateProjModel.designer.cs">
+      <DependentUpon>202306081452095_UpdateProjModel.cs</DependentUpon>
+    </Compile>
     <Compile Include="Migrations\Configuration.cs" />
     <Compile Include="Properties\AssemblyInfo.cs" />
     <Compile Include="Utils.cs" />
@@ -205,6 +218,9 @@
     <EmbeddedResource Include="Migrations\202207051703296_UpgradeLockModel.resx">
       <DependentUpon>202207051703296_UpgradeLockModel.cs</DependentUpon>
     </EmbeddedResource>
+    <EmbeddedResource Include="Migrations\202306081452095_UpdateProjModel.resx">
+      <DependentUpon>202306081452095_UpdateProjModel.cs</DependentUpon>
+    </EmbeddedResource>
   </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
   <PropertyGroup>

EgtBEAMWALL.DataLayer/Migrations/202306081452095_UpdateProjModel.Designer.cs

@@ -0,0 +1,29 @@
+// <auto-generated />
+namespace EgtBEAMWALL.DataLayer.Migrations
+{
+    using System.CodeDom.Compiler;
+    using System.Data.Entity.Migrations;
+    using System.Data.Entity.Migrations.Infrastructure;
+    using System.Resources;
+    
+    [GeneratedCode("EntityFramework.Migrations", "6.4.4")]
+    public sealed partial class UpdateProjModel : IMigrationMetadata
+    {
+        private readonly ResourceManager Resources = new ResourceManager(typeof(UpdateProjModel));
+        
+        string IMigrationMetadata.Id
+        {
+            get { return "202306081452095_UpdateProjModel"; }
+        }
+        
+        string IMigrationMetadata.Source
+        {
+            get { return null; }
+        }
+        
+        string IMigrationMetadata.Target
+        {
+            get { return Resources.GetString("Target"); }
+        }
+    }
+}

EgtBEAMWALL.DataLayer/Migrations/202306081452095_UpdateProjModel.cs

@@ -0,0 +1,20 @@
+namespace EgtBEAMWALL.DataLayer.Migrations
+{
+    using System;
+    using System.Data.Entity.Migrations;
+    
+    public partial class UpdateProjModel : DbMigration
+    {
+        public override void Up()
+        {
+            AddColumn("dbo.ProjList", "IsActive", c => c.Boolean(nullable: false, defaultValueSql: "1"));
+            AddColumn("dbo.ProjList", "ProjDescription", c => c.String(unicode: false));
+        }
+        
+        public override void Down()
+        {
+            DropColumn("dbo.ProjList", "ProjDescription");
+            DropColumn("dbo.ProjList", "IsActive");
+        }
+    }
+}

EgtBEAMWALL.DataLayer/Properties/AssemblyInfo.cs

@@ -10,7 +10,7 @@ using System.Runtime.InteropServices;
 [assembly: AssemblyConfiguration("")]
 [assembly: AssemblyCompany("Egalware s.r.l.")]
 [assembly: AssemblyProduct("EgtBEAMWALL.DataLayer")]
-[assembly: AssemblyCopyright("Copyright ©  2020-2022 by Egalware s.r.l.")]
+[assembly: AssemblyCopyright("Copyright ©  2020-2023 by Egalware s.r.l.")]
 [assembly: AssemblyTrademark("")]
 [assembly: AssemblyCulture("")]
 
@@ -32,5 +32,5 @@ using System.Runtime.InteropServices;
 // You can specify all the values or you can default the Build and Revision Numbers
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("2.4.11.3")]
-[assembly: AssemblyFileVersion("2.4.11.3")]
+[assembly: AssemblyVersion("2.5.6.2")]
+[assembly: AssemblyFileVersion("2.5.6.2")]

EgtBEAMWALL.DataLayer/packages.config

@@ -1,18 +1,22 @@
 <?xml version="1.0" encoding="utf-8"?>
 <packages>
   <package id="BouncyCastle" version="1.8.5" targetFramework="net472" />
+  <package id="DotNetZip" version="1.16.0" targetFramework="net472" />
   <package id="EntityFramework" version="6.4.4" targetFramework="net452" />
-  <package id="Google.Protobuf" version="3.19.4" targetFramework="net472" />
-  <package id="K4os.Compression.LZ4" version="1.2.6" targetFramework="net472" />
-  <package id="K4os.Compression.LZ4.Streams" version="1.2.6" targetFramework="net472" />
-  <package id="K4os.Hash.xxHash" version="1.0.6" targetFramework="net472" />
+  <package id="Google.Protobuf" version="3.21.9" targetFramework="net472" />
+  <package id="K4os.Compression.LZ4" version="1.3.5" targetFramework="net472" />
+  <package id="K4os.Compression.LZ4.Streams" version="1.3.5" targetFramework="net472" />
+  <package id="K4os.Hash.xxHash" version="1.0.8" targetFramework="net472" />
   <package id="MySql.Data" version="8.0.21" targetFramework="net472" />
   <package id="MySql.Data.EntityFramework" version="8.0.21" targetFramework="net472" />
   <package id="Newtonsoft.Json" version="13.0.1" targetFramework="net452" />
   <package id="NLog" version="5.0.1" targetFramework="net472" />
+  <package id="Portable.BouncyCastle" version="1.9.0" targetFramework="net472" />
   <package id="SSH.NET" version="2016.1.0" targetFramework="net472" />
   <package id="System.Buffers" version="4.5.1" targetFramework="net472" />
-  <package id="System.Memory" version="4.5.4" targetFramework="net472" />
+  <package id="System.IO.Pipelines" version="5.0.2" targetFramework="net472" />
+  <package id="System.Memory" version="4.5.5" targetFramework="net472" />
   <package id="System.Numerics.Vectors" version="4.5.0" targetFramework="net472" />
-  <package id="System.Runtime.CompilerServices.Unsafe" version="5.0.0" targetFramework="net472" />
+  <package id="System.Runtime.CompilerServices.Unsafe" version="6.0.0" targetFramework="net472" />
+  <package id="System.Threading.Tasks.Extensions" version="4.5.4" targetFramework="net472" />
 </packages>

EgtBEAMWALL.StressTest/App.config

@@ -1,31 +1,51 @@
-<?xml version="1.0" encoding="utf-8"?>
+<?xml version="1.0" encoding="utf-8"?>
 <configuration>
     <configSections>
-        <section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false"/>
+        <section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
         <!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
     </configSections>
     <entityFramework>
-        <defaultConnectionFactory type="MySql.Data.Entity.MySqlConnectionFactory, MySql.Data.Entity.EF6"/>
+        <defaultConnectionFactory type="MySql.Data.Entity.MySqlConnectionFactory, MySql.Data.Entity.EF6" />
         <providers>
 
             <provider invariantName="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlProviderServices, Version=6.10.9.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d"></provider>
         </providers>
     </entityFramework>
     <connectionStrings>
-        <add name="DefaultConnection" connectionString="server=localhost;port=3306;User Id=EgtUser;password=viacremasca;Persist Security Info=True;database=EgtBwDb;SslMode=none" providerName="MySql.Data.MySqlClient"/>
+        <add name="DefaultConnection" connectionString="server=localhost;port=3306;User Id=EgtUser;password=viacremasca;Persist Security Info=True;database=EgtBwDb;SslMode=none" providerName="MySql.Data.MySqlClient" />
     </connectionStrings>
     <runtime>
         <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
             <dependentAssembly>
-                <assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral"/>
-                <bindingRedirect oldVersion="0.0.0.0-6.10.9.0" newVersion="6.10.9.0"/>
+                <assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-6.10.9.0" newVersion="6.10.9.0" />
+            </dependentAssembly>
+            <dependentAssembly>
+                <assemblyIdentity name="System.Memory" publicKeyToken="cc7b13ffcd2ddd51" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-4.0.1.2" newVersion="4.0.1.2" />
+            </dependentAssembly>
+            <dependentAssembly>
+                <assemblyIdentity name="System.Runtime.CompilerServices.Unsafe" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-6.0.0.0" newVersion="6.0.0.0" />
+            </dependentAssembly>
+            <dependentAssembly>
+                <assemblyIdentity name="Google.Protobuf" publicKeyToken="a7d26565bac4d604" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-3.21.9.0" newVersion="3.21.9.0" />
+            </dependentAssembly>
+            <dependentAssembly>
+                <assemblyIdentity name="K4os.Compression.LZ4.Streams" publicKeyToken="2186fa9121ef231d" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-1.3.5.0" newVersion="1.3.5.0" />
+            </dependentAssembly>
+            <dependentAssembly>
+                <assemblyIdentity name="BouncyCastle.Crypto" publicKeyToken="0e99375e54769942" culture="neutral" />
+                <bindingRedirect oldVersion="0.0.0.0-1.9.0.0" newVersion="1.9.0.0" />
             </dependentAssembly>
         </assemblyBinding>
     </runtime>
     <system.data>
         <DbProviderFactories>
-            <remove invariant="MySql.Data.MySqlClient"/>
-            <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.10.9.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d"/>
+            <remove invariant="MySql.Data.MySqlClient" />
+            <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=6.10.9.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
         </DbProviderFactories>
     </system.data>
-<startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.5.2"/></startup></configuration>
+<startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2" /></startup></configuration>

EgtBEAMWALL.StressTest/EgtBEAMWALL.StressTest.csproj

@@ -8,7 +8,7 @@
     <OutputType>WinExe</OutputType>
     <RootNamespace>EgtBEAMWALL.StressTest</RootNamespace>
     <AssemblyName>EgtBEAMWALL.StressTest</AssemblyName>
-    <TargetFrameworkVersion>v4.5.2</TargetFrameworkVersion>
+    <TargetFrameworkVersion>v4.7.2</TargetFrameworkVersion>
     <FileAlignment>512</FileAlignment>
     <Deterministic>true</Deterministic>
     <TargetFrameworkProfile />

EgtBEAMWALL.StressTest/Properties/Resources.Designer.cs

@@ -19,7 +19,7 @@ namespace EgtBEAMWALL.StressTest.Properties {
     // class via a tool like ResGen or Visual Studio.
     // To add or remove a member, edit your .ResX file then rerun ResGen
     // with the /str option, or rebuild your VS project.
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "16.0.0.0")]
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("System.Resources.Tools.StronglyTypedResourceBuilder", "17.0.0.0")]
     [global::System.Diagnostics.DebuggerNonUserCodeAttribute()]
     [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
     internal class Resources {

EgtBEAMWALL.StressTest/Properties/Settings.Designer.cs

@@ -12,7 +12,7 @@ namespace EgtBEAMWALL.StressTest.Properties {
     
     
     [global::System.Runtime.CompilerServices.CompilerGeneratedAttribute()]
-    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "16.8.1.0")]
+    [global::System.CodeDom.Compiler.GeneratedCodeAttribute("Microsoft.VisualStudio.Editors.SettingsDesigner.SettingsSingleFileGenerator", "17.6.0.0")]
     internal sealed partial class Settings : global::System.Configuration.ApplicationSettingsBase {
         
         private static Settings defaultInstance = ((Settings)(global::System.Configuration.ApplicationSettingsBase.Synchronized(new Settings())));

EgtBEAMWALL.StressTest/Simulator.cs

@@ -1,25 +1,11 @@
 using System;
 using System.Collections.Generic;
-using System.Diagnostics;
 using System.Linq;
-using System.Text;
 
 namespace EgtBEAMWALL.StressTest
 {
     public class Simulator
     {
-        #region Protected Fields
-
-        protected DataLayer.Controllers.BTLPartController BtlPartCtr = new DataLayer.Controllers.BTLPartController();
-        protected DataLayer.Controllers.MachGroupController MachGroupCtr = new DataLayer.Controllers.MachGroupController();
-        protected SimParams MaxParams = new SimParams();
-
-        protected DataLayer.Controllers.PartController PartCtr = new DataLayer.Controllers.PartController();
-        protected DataLayer.Controllers.ProdController ProdCtr = new DataLayer.Controllers.ProdController();
-        protected DataLayer.Controllers.ProjController ProjCtr = new DataLayer.Controllers.ProjController();
-
-        #endregion Protected Fields
-
         #region Public Fields
 
         public List<Core.BTLPartM> BtlPartList = new List<Core.BTLPartM>();
@@ -30,30 +16,6 @@ namespace EgtBEAMWALL.StressTest
 
         #endregion Public Fields
 
-        #region Protected Properties
-
-        /// <summary>
-        /// restituisce un set di parametri simulazione generando a caso dal set di base
-        /// </summary>
-        protected SimParams RandomParamSet
-        {
-            get
-            {
-                Random rndGen = new Random();
-                SimParams answ = new SimParams()
-                {
-                    BtlPart2Proj = rndGen.Next(MaxParams.BtlPart2Proj) + 1,
-                    BtlRepeat = rndGen.Next(MaxParams.BtlRepeat) + 1,
-                    Part2MachGroup = rndGen.Next(MaxParams.Part2MachGroup) + 1,
-                    Proj2Prod = rndGen.Next(MaxParams.Proj2Prod) + 1
-                };
-
-                return answ;
-            }
-        }
-
-        #endregion Protected Properties
-
         #region Public Methods
 
         /// <summary>
@@ -79,7 +41,7 @@ namespace EgtBEAMWALL.StressTest
                 List<DataLayer.DatabaseModels.BTLPartModel> currPartList = new List<DataLayer.DatabaseModels.BTLPartModel>();
                 List<Core.MyMachGroupM> currMachGroupList = new List<Core.MyMachGroupM>();
                 List<Core.PartM> currMGPartList = new List<Core.PartM>();
-                ProjCtr.UpdateInfo(currProjId, $"{DateTime.Now:yyyyMMdd_HHmmssfff}", $"LN_{DateTime.Now:yyyyMMdd_HHmm}", DateTime.Now.AddSeconds(15), Core.ConstBeam.BWType.BEAM, "SIM01");
+                ProjCtr.UpdateInfo(currProjId, "TestBTL", $"{DateTime.Now:yyyyMMdd_HHmmssfff}", $"LN_{DateTime.Now:yyyyMMdd_HHmm}", DateTime.Now.AddSeconds(15), Core.ConstBeam.BWType.BEAM, "SIM01");
                 // genero le BTLParts ed assegno..
                 for (int j = 0; j < currRandom.BtlPart2Proj; j++)
                 {
@@ -107,8 +69,8 @@ namespace EgtBEAMWALL.StressTest
                     {
                         for (int l = 0; l < currRandom.Part2MachGroup; l++)
                         {
-                            // FixME!!! non può creare x loop in CreateBeamDL che vuole nParentMachGroup
-                            // genero le Part x MachGroup ed assegno
+                            // FixME!!! non può creare x loop in CreateBeamDL che vuole
+                            // nParentMachGroup genero le Part x MachGroup ed assegno
                             Core.PartM currPart = Core.PartM.CreatePart(Core.ConstBeam.BWType.BEAM, currMachGroupList.FirstOrDefault(), currPartList[BPIdx].PartId, 1);
                             currMGPartList.Add(currPart);
                             //currMGPartList.Add(new DataLayer.DatabaseModels.PartModel() { BTLPartDbId = currBTLPart.BTLPartDbId, PDN = l * k * currRandom.Part2MachGroup, PartId = l, H = 10 * l, L = 50 * l, W = 5 * l });
@@ -138,9 +100,45 @@ namespace EgtBEAMWALL.StressTest
 
         public void initDb()
         {
-            var firstData = ProjCtr.GetLastDesc(1);
+            var firstData = ProjCtr.GetLastDesc(1, true);
         }
 
         #endregion Public Methods
+
+        #region Protected Fields
+
+        protected DataLayer.Controllers.BTLPartController BtlPartCtr = new DataLayer.Controllers.BTLPartController();
+        protected DataLayer.Controllers.MachGroupController MachGroupCtr = new DataLayer.Controllers.MachGroupController();
+        protected SimParams MaxParams = new SimParams();
+
+        protected DataLayer.Controllers.PartController PartCtr = new DataLayer.Controllers.PartController();
+        protected DataLayer.Controllers.ProdController ProdCtr = new DataLayer.Controllers.ProdController();
+        protected DataLayer.Controllers.ProjController ProjCtr = new DataLayer.Controllers.ProjController();
+
+        #endregion Protected Fields
+
+        #region Protected Properties
+
+        /// <summary>
+        /// restituisce un set di parametri simulazione generando a caso dal set di base
+        /// </summary>
+        protected SimParams RandomParamSet
+        {
+            get
+            {
+                Random rndGen = new Random();
+                SimParams answ = new SimParams()
+                {
+                    BtlPart2Proj = rndGen.Next(MaxParams.BtlPart2Proj) + 1,
+                    BtlRepeat = rndGen.Next(MaxParams.BtlRepeat) + 1,
+                    Part2MachGroup = rndGen.Next(MaxParams.Part2MachGroup) + 1,
+                    Proj2Prod = rndGen.Next(MaxParams.Proj2Prod) + 1
+                };
+
+                return answ;
+            }
+        }
+
+        #endregion Protected Properties
     }
 }

EgtBEAMWALL.StressTest/StressTest.Designer.cs

@@ -35,6 +35,10 @@ namespace EgtBEAMWALL.StressTest
             this.groupBox1 = new System.Windows.Forms.GroupBox();
             this.buttonDataSeed = new System.Windows.Forms.Button();
             this.labelResult = new System.Windows.Forms.Label();
+            this.btnDbDump = new System.Windows.Forms.Button();
+            this.btnDbRestore = new System.Windows.Forms.Button();
+            this.txtDumpFile = new System.Windows.Forms.TextBox();
+            this.txtDbName = new System.Windows.Forms.TextBox();
             this.groupBox1.SuspendLayout();
             this.SuspendLayout();
             // 
@@ -92,17 +96,57 @@ namespace EgtBEAMWALL.StressTest
             // labelResult
             // 
             this.labelResult.AutoSize = true;
-            this.labelResult.Location = new System.Drawing.Point(479, 91);
+            this.labelResult.Location = new System.Drawing.Point(250, 75);
             this.labelResult.Name = "labelResult";
             this.labelResult.Size = new System.Drawing.Size(35, 13);
             this.labelResult.TabIndex = 4;
             this.labelResult.Text = "label2";
             // 
+            // btnDbDump
+            // 
+            this.btnDbDump.Location = new System.Drawing.Point(18, 136);
+            this.btnDbDump.Name = "btnDbDump";
+            this.btnDbDump.Size = new System.Drawing.Size(75, 45);
+            this.btnDbDump.TabIndex = 5;
+            this.btnDbDump.Text = "DB Dump";
+            this.btnDbDump.UseVisualStyleBackColor = true;
+            this.btnDbDump.Click += new System.EventHandler(this.btnDbDump_Click);
+            // 
+            // btnDbRestore
+            // 
+            this.btnDbRestore.Location = new System.Drawing.Point(338, 136);
+            this.btnDbRestore.Name = "btnDbRestore";
+            this.btnDbRestore.Size = new System.Drawing.Size(75, 45);
+            this.btnDbRestore.TabIndex = 6;
+            this.btnDbRestore.Text = "DB Restore";
+            this.btnDbRestore.UseVisualStyleBackColor = true;
+            this.btnDbRestore.Click += new System.EventHandler(this.btnDbRestore_Click);
+            // 
+            // txtDumpFile
+            // 
+            this.txtDumpFile.Location = new System.Drawing.Point(118, 161);
+            this.txtDumpFile.Name = "txtDumpFile";
+            this.txtDumpFile.Size = new System.Drawing.Size(186, 20);
+            this.txtDumpFile.TabIndex = 3;
+            this.txtDumpFile.Text = "C:\\Temp\\MyDbDump.zip";
+            // 
+            // txtDbName
+            // 
+            this.txtDbName.Location = new System.Drawing.Point(118, 136);
+            this.txtDbName.Name = "txtDbName";
+            this.txtDbName.Size = new System.Drawing.Size(186, 20);
+            this.txtDbName.TabIndex = 7;
+            this.txtDbName.Text = "egtbwdb_000142";
+            // 
             // StressTest
             // 
             this.AutoScaleDimensions = new System.Drawing.SizeF(6F, 13F);
             this.AutoScaleMode = System.Windows.Forms.AutoScaleMode.Font;
             this.ClientSize = new System.Drawing.Size(800, 450);
+            this.Controls.Add(this.txtDbName);
+            this.Controls.Add(this.txtDumpFile);
+            this.Controls.Add(this.btnDbRestore);
+            this.Controls.Add(this.btnDbDump);
             this.Controls.Add(this.labelResult);
             this.Controls.Add(this.groupBox1);
             this.Name = "StressTest";
@@ -122,6 +166,10 @@ namespace EgtBEAMWALL.StressTest
         private System.Windows.Forms.GroupBox groupBox1;
         private System.Windows.Forms.Button buttonDataSeed;
         private System.Windows.Forms.Label labelResult;
+        private System.Windows.Forms.Button btnDbDump;
+        private System.Windows.Forms.Button btnDbRestore;
+        private System.Windows.Forms.TextBox txtDumpFile;
+        private System.Windows.Forms.TextBox txtDbName;
     }
 }
 

EgtBEAMWALL.StressTest/StressTest.cs

@@ -1,17 +1,25 @@
 using System;
-using System.Collections.Generic;
-using System.ComponentModel;
-using System.Data;
 using System.Diagnostics;
-using System.Drawing;
-using System.Linq;
-using System.Text;
+using System.IO;
 using System.Windows.Forms;
 
 namespace EgtBEAMWALL.StressTest
 {
     public partial class StressTest : Form
     {
+        #region Public Constructors
+
+        public StressTest()
+        {
+            InitializeComponent();
+            // init cablato sul mio DB
+            DataLayer.DbConfig.InitDb("127.0.0.1", "000470", "36311", "000470");
+            //// warm up DB
+            //CurrSim.initDb();
+        }
+
+        #endregion Public Constructors
+
         #region Protected Fields
 
         /// <summary>
@@ -21,17 +29,6 @@ namespace EgtBEAMWALL.StressTest
 
         #endregion Protected Fields
 
-        #region Public Constructors
-
-        public StressTest()
-        {
-            InitializeComponent();
-            // warm up DB
-            CurrSim.initDb();
-        }
-
-        #endregion Public Constructors
-
         #region Protected Properties
 
         protected int numProj
@@ -52,6 +49,54 @@ namespace EgtBEAMWALL.StressTest
 
         #region Private Methods
 
+        private void btnDbDump_Click(object sender, EventArgs e)
+        {
+            var result = MessageBox.Show("Sicuro di voler generare il dump del DB corrente?", "DB Dump", MessageBoxButtons.YesNo, MessageBoxIcon.Exclamation);
+
+            if (result == DialogResult.Yes)
+            {
+                labelResult.Text = "...";
+                Stopwatch sw = new Stopwatch();
+                sw.Start();
+                //string binPath = "C:\\Program Files\\MariaDB 10.5\\bin";
+                //string myDumpPath = Path.Combine(binPath, "mysqldump.exe");
+                string outPath = txtDumpFile.Text.Trim();
+                string dbName = txtDbName.Text.Trim();
+                if (!string.IsNullOrEmpty(outPath))
+                {
+                    // effettua dump
+                    //DataLayer.DbConfig.DataBaseDumpToFile(outPath,  "mysqldump");
+                    //DataLayer.DbConfig.DataBaseDumpToFile(outPath, "mysqldump", "--skip-extended-insert");
+                    DataLayer.DbConfig.DataBaseDumpToFile(outPath, dbName);
+                    sw.Stop();
+                    var elapsed = sw.Elapsed;
+                    labelResult.Text = $"{DateTime.Now:yyyy/MM/dd HH:mm:ss} | Dump Done in {elapsed.TotalSeconds:N3} sec!";
+                }
+            }
+        }
+
+        private void btnDbRestore_Click(object sender, EventArgs e)
+        {
+            var result = MessageBox.Show("Sicuro di voler ripristinare il file dump sul DB corrente?", "DB Restore", MessageBoxButtons.YesNo, MessageBoxIcon.Exclamation);
+
+            if (result == DialogResult.Yes)
+            {
+                labelResult.Text = "...";
+                string inPath = txtDumpFile.Text.Trim();
+                string dbName = txtDbName.Text.Trim();
+                string tempFolder = Path.Combine(Path.GetDirectoryName(inPath), "DbRestore");
+                Stopwatch sw = new Stopwatch();
+                sw.Start();
+                // effettua restore
+                DataLayer.DbConfig.DataBaseRestoreFromFile(inPath, dbName, tempFolder); sw.Stop();
+                //string binPath = "C:\\Program Files\\MariaDB 10.5\\bin";
+                //string mysqlPath = Path.Combine(binPath, "mysql.exe");
+                //DataLayer.DbConfig.DataBaseRestoreFromFile(inPath, "mysql");
+                var elapsed = sw.Elapsed;
+                labelResult.Text = $"{DateTime.Now:yyyy/MM/dd HH:mm:ss} | Restore Done in {elapsed.TotalSeconds:N3} sec!";
+            }
+        }
+
         private void buttonDataSeed_Click(object sender, EventArgs e)
         {
             // genero dati col SIM

EgtBEAMWALL.Supervisor/CALCPanel/CALCPanelVM.vb

@@ -118,6 +118,7 @@ Public Class CALCPanelVM
    End Sub
 
    Private Shared Sub ProcessResults(Bar As Bar)
+      If IsNothing(Bar) Then Return
 
       ' disabilito impostazione modificato
       Dim DisableMgr As New DisableModifiedMgr
@@ -148,7 +149,7 @@ Public Class CALCPanelVM
 
             If line.StartsWith("ERR=") Then
                Dim nVal As Integer? = GetVal(line, "ERR")
-               nErr = (If(nVal IsNot Nothing, nVal.Value, 0))
+               nErr = (If(Not IsNothing(nVal), nVal.Value, 0))
                sMsg = ""
                dRot = 0
                nFall = 0
@@ -156,24 +157,24 @@ Public Class CALCPanelVM
                taskId = 0
             ElseIf line.StartsWith("ROT=") Then
                Dim nVal As Integer? = GetVal(line, "ROT")
-               Dim nRot As Integer = (If(nVal IsNot Nothing, nVal.Value, 0))
+               Dim nRot As Integer = (If(Not IsNothing(nVal), nVal.Value, 0))
                dRot = Math.Abs(((4 - nRot) Mod 4) * 90)
                dPartRot = Math.Max(dPartRot, dRot)
                dTotRot = Math.Max(dTotRot, dRot)
             ElseIf line.StartsWith("CUTID=") Then
                Dim nVal As Integer? = GetVal(line, "CUTID")
-               cutId = If(nVal IsNot Nothing, nVal.Value, 0)
+               cutId = If(Not IsNothing(nVal), nVal.Value, 0)
             ElseIf line.StartsWith("TASKID=") Then
                Dim nVal As Integer? = GetVal(line, "TASKID")
-               taskId = (If(nVal IsNot Nothing, nVal.Value, 0))
+               taskId = (If(Not IsNothing(nVal), nVal.Value, 0))
                ProcessResultAdd(ProcessResultList, ProcessResult.CreateTaskResult(cutId, taskId, nErr, sMsg, dRot), Bar)
             ElseIf line.StartsWith("FALL=") Then
                Dim nVal As Integer? = GetVal(line, "FALL")
-               nFall = (If(nVal IsNot Nothing, nVal.Value, 0))
+               nFall = (If(Not IsNothing(nVal), nVal.Value, 0))
                ProcessResultList.Add(ProcessResult.CreateFallResult(cutId, nErr, sMsg, nFall))
             ElseIf line.StartsWith("TIME=") Then
                Dim nVal As Integer? = GetVal(line, "TIME")
-               nTotTime = (If(nVal IsNot Nothing, nVal.Value, 0))
+               nTotTime = (If(Not IsNothing(nVal), nVal.Value, 0))
                ProcessResultList.Add(ProcessResult.CreateTimeResult(cutId, nTotTime))
                'If Bar.nBarType = ProjectType.PROJ AndAlso Not IsNothing(currBTLPart) Then
                '   EgtSetInfo(currBTLPart.nPartId, If(Bar.nBarType = ProjectType.PROJ, ITG_PROJ_TIME, ITG_PROD_TIME), nTotTime, True)
@@ -216,23 +217,25 @@ Public Class CALCPanelVM
                End If
                Select Case Line.Type
                   Case ProcessResult.ProcessResultTypes.BAR
-                     CurrMachgroupVM.CalcMachGroupUpdate(Line.nERR, Line.dROT, Line.sMSG)
+                     If Not IsNothing(CurrMachgroupVM) Then CurrMachgroupVM.CalcMachGroupUpdate(Line.nERR, Line.dROT, Line.sMSG)
                   Case ProcessResult.ProcessResultTypes.PART
-                     CurrPartVM.CalcPartUpdate(Line.nERR, Line.dROT, Line.sMSG)
+                     If Not IsNothing(CurrPartVM) Then CurrPartVM.CalcPartUpdate(Line.nERR, Line.dROT, Line.sMSG)
                   Case ProcessResult.ProcessResultTypes.TASKID
-                     CurrBTLFeatureVM.CalcFeatureUpdate(Line.nERR, Line.dROT, Line.sMSG)
+                     If Not IsNothing(CurrBTLFeatureVM) Then CurrBTLFeatureVM.CalcFeatureUpdate(Line.nERR, Line.dROT, Line.sMSG)
                   Case ProcessResult.ProcessResultTypes.FALL
-                     CurrPartVM.CalcFallUpdate(Line.nFALL)
+                     If Not IsNothing(CurrPartVM) Then CurrPartVM.CalcFallUpdate(Line.nFALL)
                   Case ProcessResult.ProcessResultTypes.TIME
                      If IsNothing(CurrMachgroupVM) Then CurrMachgroupVM = GetMachgroupVMFromMachgroupId(Bar.nBarId)
-                     CurrMachgroupVM.CalcTimeUpdate(Line.nTIME)
+                     If Not IsNothing(CurrMachgroupVM) Then CurrMachgroupVM.CalcTimeUpdate(Line.nTIME)
                End Select
             Next
             Machgroup = GetMachgroupVMFromMachgroupId(Bar.nBarId)
-            For Each Part In Machgroup.PartVMList
-               Part.CalcGlobalUpdate()
-            Next
-            Machgroup.CalcGlobalUpdate()
+            If Not IsNothing(Machgroup) Then
+               For Each Part In Machgroup.PartVMList
+                  Part.CalcGlobalUpdate()
+               Next
+               Machgroup.CalcGlobalUpdate()
+            End If
 
          End If
 

EgtBEAMWALL.Supervisor/Comms/NUMAxiumComm.vb

@@ -474,7 +474,7 @@ Public Class NUMAxiumComm
    Friend Sub WriteNCVariables(Address As String, value As String)
       Try
          Dim dValue As Double = 0
-         StringToDouble(value, dValue)
+         StringToDoubleAdv(value, dValue)
          Dim rc As Short = objDVariables.WriteVariables(objDGroupManager.Handle, Address, value)
 
          'If rc <> 0 Then EgtOutLog(" objDVariables.WriteVariables2() Error : " & rc)

EgtBEAMWALL.Supervisor/Comms/NUMAxiumPcToolkitComm.vb

@@ -467,7 +467,7 @@ Public Class NUMAxiumPcToolkitComm
    Friend Sub WritePlcVariables(Address As String, value As String)
       Try
          Dim dValue As Double = 0
-         StringToDouble(value, dValue)
+         StringToDoubleAdv(value, dValue)
          Select Case Address
             Case "E30099"     ' in realta' per scrivere si usa la %RD0C.L
                Dim nRes = WriteLadderVar(m_nPortWVariables, RL, &HD0C, 1, dValue)
@@ -641,7 +641,6 @@ Public Class NUMAxiumPcToolkitComm
       Dim FileTransferThread As New Thread(Sub()
                                               ' leggo variabile E30099
                                               Dim SendPermissionVariable As Variable = Map.refMachCommandMessagePanelVM.MainVariablesList.FirstOrDefault(Function(x) x.sName = SENDPERMISSION)
-                                              Dim dTemp As Double = 0
                                               Dim nSendPermission As Integer = 0
                                               EgtOutLog("Inizio invio programma")
                                               While nSendPermission <> 2
@@ -649,8 +648,7 @@ Public Class NUMAxiumPcToolkitComm
                                                  EgtOutLog("Inizio ciclo verifica diverso da 2")
                                                  ' leggo valore
                                                  If Not IsNothing(SendPermissionVariable.sValue) Then
-                                                    StringToDouble(SendPermissionVariable.sValue, dTemp)
-                                                    Integer.TryParse(dTemp, nSendPermission)
+                                                    Integer.TryParse(SendPermissionVariable.sValue, nSendPermission)
                                                     EgtOutLog("Lettura variabile E30099: " & nSendPermission)
                                                  Else
                                                     EgtOutLog("nSendPermission = -1")
@@ -701,6 +699,12 @@ Public Class NUMAxiumPcToolkitComm
                                                     Try
                                                        ISONumVariable.sValue = SentMachGroup.Name
                                                        ISOSentVariable.sValue = 0
+                                                       'Dim TempISOSentVariable As Variable = Map.refMachCommandMessagePanelVM.MainVariablesList.FirstOrDefault(Function(x) x.sName = ISO_SENT)
+                                                       'While ISOSentVariable.sValue <> "0"
+                                                       '   Threading.Thread.Sleep(100)
+                                                       '   EgtOutLog("Bloccato - Sent(80046): " & TempISOSentVariable.sValue & " Num(80045): " & ISONumVariable.sValue)
+                                                       '   TempISOSentVariable = Map.refMachCommandMessagePanelVM.MainVariablesList.FirstOrDefault(Function(x) x.sName = ISO_SENT)
+                                                       'End While
                                                        SentMachGroup.SetSentToMachine(True)
                                                     Catch ex As Exception
                                                        EgtOutLog("Error write var after download: " & ex.Message)
@@ -710,6 +714,7 @@ Public Class NUMAxiumPcToolkitComm
                                               nRes = DownLoadFileAsyn(nPortFileTransfer, nFileType, sFilePath, DNC_MODE_ABORT, nIndex)
                                               SendPermissionVariable.sValue = 0
                                               m_BytesTransferedCounter = 0
+                                              Threading.Thread.Sleep(1000)
                                               m_bIsTransferActive = False
                                               Return
                                            End Sub)
@@ -791,7 +796,7 @@ Public Class NUMAxiumPcToolkitComm
    Friend Sub WriteNCVariables(Address As String, value As String)
       Try
          Dim dValue As Double = 0
-         StringToDouble(value, dValue)
+         StringToDoubleAdv(value, dValue)
          Dim nType As eVarious4
          Dim nValue As Integer = 0
          Dim MyData As New My_data_struct

EgtBEAMWALL.Supervisor/Comms/NUMFlexiumComm.vb

@@ -378,7 +378,7 @@ Public Class NUMFlexiumComm
       '   EgtOutLog("Inizio ciclo verifica diverso da 2")
       '   ' leggo valore
       '   If Not IsNothing(SendPermissionVariable.sValue) Then
-      '      StringToDouble(SendPermissionVariable.sValue, dTemp)
+      '      StringToDoubleAdv(SendPermissionVariable.sValue, dTemp)
       '      Integer.TryParse(dTemp, nSendPermission)
       '      EgtOutLog("Lettura variabile E30099: " & nSendPermission)
       '   Else
@@ -449,7 +449,7 @@ Public Class NUMFlexiumComm
    Friend Sub WriteNCVariables(Address As String, value As String)
       Try
          Dim dValue As Double = 0
-         StringToDouble(value, dValue)
+         StringToDoubleAdv(value, dValue)
          Dim rc As Short = objDVariables.WriteVariables2(2, objDGroupManager.Handle, Address, dValue)
 
          If rc <> 0 Then EgtOutLog(" objDVariables.WriteVariables2() Error : " & rc)

EgtBEAMWALL.Supervisor/EgtBEAMWALL.Supervisor.vbproj

@@ -102,6 +102,38 @@
   <PropertyGroup>
     <ApplicationManifest>app.manifest</ApplicationManifest>
   </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'RemoteDebug|AnyCPU'">
+    <DebugSymbols>true</DebugSymbols>
+    <DefineDebug>true</DefineDebug>
+    <DefineTrace>true</DefineTrace>
+    <OutputPath>bin\RemoteDebug\</OutputPath>
+    <DocumentationFile>EgtBEAMWALL.Supervisor.xml</DocumentationFile>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
+    <DebugType>full</DebugType>
+    <PlatformTarget>AnyCPU</PlatformTarget>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'RemoteDebug|x64'">
+    <DebugSymbols>true</DebugSymbols>
+    <DefineDebug>true</DefineDebug>
+    <DefineTrace>true</DefineTrace>
+    <OutputPath>bin\x64\RemoteDebug\</OutputPath>
+    <DocumentationFile>EgtBEAMWALL.Supervisor.xml</DocumentationFile>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
+    <DebugType>full</DebugType>
+    <PlatformTarget>x64</PlatformTarget>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'RemoteDebug|x86'">
+    <DebugSymbols>true</DebugSymbols>
+    <DefineDebug>true</DefineDebug>
+    <DefineTrace>true</DefineTrace>
+    <OutputPath>bin\x86\RemoteDebug\</OutputPath>
+    <DocumentationFile>EgtBEAMWALL.Supervisor.xml</DocumentationFile>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
+    <DebugType>full</DebugType>
+    <PlatformTarget>x86</PlatformTarget>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+  </PropertyGroup>
   <ItemGroup>
     <Reference Include="APLog">
       <HintPath>..\ExtLibs\APLog.dll</HintPath>
@@ -111,12 +143,15 @@
       <HintPath>..\ExtLibs\APServer.dll</HintPath>
       <EmbedInteropTypes>True</EmbedInteropTypes>
     </Reference>
-    <Reference Include="BouncyCastle.Crypto, Version=1.8.5.0, Culture=neutral, PublicKeyToken=0e99375e54769942">
-      <HintPath>..\packages\BouncyCastle.1.8.5\lib\BouncyCastle.Crypto.dll</HintPath>
+    <Reference Include="BouncyCastle.Crypto, Version=1.9.0.0, Culture=neutral, PublicKeyToken=0e99375e54769942, processorArchitecture=MSIL">
+      <HintPath>..\packages\Portable.BouncyCastle.1.9.0\lib\net40\BouncyCastle.Crypto.dll</HintPath>
     </Reference>
     <Reference Include="Csv, Version=1.0.31.0, Culture=neutral, processorArchitecture=MSIL">
       <HintPath>..\packages\Csv.1.0.31\lib\net40\Csv.dll</HintPath>
     </Reference>
+    <Reference Include="DotNetZip, Version=1.16.0.0, Culture=neutral, PublicKeyToken=6583c7c814667745, processorArchitecture=MSIL">
+      <HintPath>..\packages\DotNetZip.1.16.0\lib\net40\DotNetZip.dll</HintPath>
+    </Reference>
     <Reference Include="EgtUILib, Version=2.4.3.1, Culture=neutral, processorArchitecture=MSIL">
       <SpecificVersion>False</SpecificVersion>
       <HintPath>..\ExtLibs\EgtUILib.dll</HintPath>
@@ -134,8 +169,8 @@
     <Reference Include="FluentFTP, Version=19.2.2.0, Culture=neutral, PublicKeyToken=f4af092b1d8df44f, processorArchitecture=MSIL">
       <HintPath>..\packages\FluentFTP.19.2.2\lib\net45\FluentFTP.dll</HintPath>
     </Reference>
-    <Reference Include="Google.Protobuf, Version=3.19.4.0, Culture=neutral, PublicKeyToken=a7d26565bac4d604, processorArchitecture=MSIL">
-      <HintPath>..\packages\Google.Protobuf.3.19.4\lib\net45\Google.Protobuf.dll</HintPath>
+    <Reference Include="Google.Protobuf, Version=3.21.9.0, Culture=neutral, PublicKeyToken=a7d26565bac4d604, processorArchitecture=MSIL">
+      <HintPath>..\packages\Google.Protobuf.3.21.9\lib\net45\Google.Protobuf.dll</HintPath>
     </Reference>
     <Reference Include="Interop.FXLog">
       <HintPath>..\ExtLibs\Interop.FXLog.dll</HintPath>
@@ -145,20 +180,17 @@
       <HintPath>..\ExtLibs\Interop.FXServer.dll</HintPath>
       <EmbedInteropTypes>True</EmbedInteropTypes>
     </Reference>
-    <Reference Include="Ionic.Zip, Version=1.9.1.8, Culture=neutral, PublicKeyToken=edbe51ad942a3f5c, processorArchitecture=MSIL">
-      <HintPath>..\packages\Ionic.Zip.1.9.1.8\lib\Ionic.Zip.dll</HintPath>
-    </Reference>
     <Reference Include="ISOCNC.Remoting">
       <HintPath>..\ExtLibs\ISOCNC.Remoting.dll</HintPath>
     </Reference>
-    <Reference Include="K4os.Compression.LZ4, Version=1.2.6.0, Culture=neutral, PublicKeyToken=2186fa9121ef231d, processorArchitecture=MSIL">
-      <HintPath>..\packages\K4os.Compression.LZ4.1.2.6\lib\net46\K4os.Compression.LZ4.dll</HintPath>
+    <Reference Include="K4os.Compression.LZ4, Version=1.3.5.0, Culture=neutral, PublicKeyToken=2186fa9121ef231d, processorArchitecture=MSIL">
+      <HintPath>..\packages\K4os.Compression.LZ4.1.3.5\lib\net462\K4os.Compression.LZ4.dll</HintPath>
     </Reference>
-    <Reference Include="K4os.Compression.LZ4.Streams, Version=1.2.6.0, Culture=neutral, PublicKeyToken=2186fa9121ef231d, processorArchitecture=MSIL">
-      <HintPath>..\packages\K4os.Compression.LZ4.Streams.1.2.6\lib\net46\K4os.Compression.LZ4.Streams.dll</HintPath>
+    <Reference Include="K4os.Compression.LZ4.Streams, Version=1.3.5.0, Culture=neutral, PublicKeyToken=2186fa9121ef231d, processorArchitecture=MSIL">
+      <HintPath>..\packages\K4os.Compression.LZ4.Streams.1.3.5\lib\net462\K4os.Compression.LZ4.Streams.dll</HintPath>
     </Reference>
-    <Reference Include="K4os.Hash.xxHash, Version=1.0.6.0, Culture=neutral, PublicKeyToken=32cd54395057cec3, processorArchitecture=MSIL">
-      <HintPath>..\packages\K4os.Hash.xxHash.1.0.6\lib\net46\K4os.Hash.xxHash.dll</HintPath>
+    <Reference Include="K4os.Hash.xxHash, Version=1.0.8.0, Culture=neutral, PublicKeyToken=32cd54395057cec3, processorArchitecture=MSIL">
+      <HintPath>..\packages\K4os.Hash.xxHash.1.0.8\lib\net462\K4os.Hash.xxHash.dll</HintPath>
     </Reference>
     <Reference Include="Microsoft.CSharp" />
     <Reference Include="Microsoft.DotNet.PlatformAbstractions, Version=2.1.0.0, Culture=neutral, PublicKeyToken=adb9793829ddae60, processorArchitecture=MSIL">
@@ -210,9 +242,12 @@
     <Reference Include="System.Drawing" />
     <Reference Include="System.Drawing.Design" />
     <Reference Include="System.IO.Compression" />
+    <Reference Include="System.IO.Pipelines, Version=5.0.0.2, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.IO.Pipelines.5.0.2\lib\net461\System.IO.Pipelines.dll</HintPath>
+    </Reference>
     <Reference Include="System.Management" />
-    <Reference Include="System.Memory, Version=4.0.1.1, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
-      <HintPath>..\packages\System.Memory.4.5.4\lib\net461\System.Memory.dll</HintPath>
+    <Reference Include="System.Memory, Version=4.0.1.2, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.Memory.4.5.5\lib\net461\System.Memory.dll</HintPath>
     </Reference>
     <Reference Include="System.Net.NameResolution, Version=4.0.1.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
       <HintPath>..\packages\System.Net.NameResolution.4.3.0\lib\net46\System.Net.NameResolution.dll</HintPath>
@@ -228,8 +263,8 @@
     <Reference Include="System.Numerics.Vectors, Version=4.1.4.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
       <HintPath>..\packages\System.Numerics.Vectors.4.5.0\lib\net46\System.Numerics.Vectors.dll</HintPath>
     </Reference>
-    <Reference Include="System.Runtime.CompilerServices.Unsafe, Version=5.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
-      <HintPath>..\packages\System.Runtime.CompilerServices.Unsafe.5.0.0\lib\net45\System.Runtime.CompilerServices.Unsafe.dll</HintPath>
+    <Reference Include="System.Runtime.CompilerServices.Unsafe, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.Runtime.CompilerServices.Unsafe.6.0.0\lib\net461\System.Runtime.CompilerServices.Unsafe.dll</HintPath>
     </Reference>
     <Reference Include="System.Runtime.InteropServices.RuntimeInformation, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
       <HintPath>..\packages\System.Runtime.InteropServices.RuntimeInformation.4.0.0\lib\net45\System.Runtime.InteropServices.RuntimeInformation.dll</HintPath>
@@ -238,6 +273,9 @@
     </Reference>
     <Reference Include="System.Runtime.Remoting" />
     <Reference Include="System.Security" />
+    <Reference Include="System.Threading.Tasks.Extensions, Version=4.2.0.1, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.Threading.Tasks.Extensions.4.5.4\lib\net461\System.Threading.Tasks.Extensions.dll</HintPath>
+    </Reference>
     <Reference Include="System.Transactions" />
     <Reference Include="System.Web" />
     <Reference Include="System.Windows.Forms" />

EgtBEAMWALL.Supervisor/LeftPanel/LeftPanelVM.vb

@@ -1,4 +1,5 @@
 Imports System.Collections.ObjectModel
+Imports System.Globalization
 Imports System.IO
 Imports System.Windows.Threading
 Imports EgtBEAMWALL.Core
@@ -39,7 +40,7 @@ Public Class LeftPanelVM
          Return m_SelChannel
       End Get
       Set(ByVal value As IdNameStruct)
-         MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.SETCHANNEL, value.Id))
+         MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.SETCHANNEL, value.Id))
          m_SelChannel = value
       End Set
    End Property
@@ -85,7 +86,7 @@ Public Class LeftPanelVM
          Return m_SelOPMode
       End Get
       Set(ByVal value As OPState)
-         MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.SETOPMODE, value.Id))
+         MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.SETOPMODE, value.Id))
          ' se MDI
          If value.Id = OPModes.Mdi Then
             ' mostro pagina comandi MDI
@@ -1003,14 +1004,48 @@ Public Class LeftPanelVM
 
    Private Sub CreateDataFile(sFilePath As String, SelPart As PartVM, SelMachGroup As MyMachGroupVM)
       Dim sFileText As New List(Of String)
+      Dim nBtlInfoId As Integer = EgtGetFirstNameInGroup(GDB_ID.ROOT, BTLINFO)
+      Dim sInfo As String = ""
+      Dim bOk As Boolean = False
       ' inserisco il capitolo del [Main]
       sFileText.Add("[Main]")
       sFileText.Add("Var1=$PRODID$," & Map.refSupervisorManagerVM.CurrProd.sProdId)
-      sFileText.Add("Var2=$MACHGROUPID$," & SelMachGroup.Id)
+      sFileText.Add("Var2=$MACHGROUPID$," & SelMachGroup.nName)
       sFileText.Add("Var3=$PARTID$," & SelPart.nPDN)
       sFileText.Add("Var4=$MATERIAL$," & SelPart.sMATERIAL)
-      'sFileText.Add("Var5=$Thickness$," & SelPart.Thickness)
-      'sFileText.Add("Var6=$Storage$," & SelPart.WarehousePosition)
+      bOk = EgtGetInfo(nBtlInfoId, BTL_GEN_PROJNUM, sInfo)
+      sFileText.Add("Var5=$PROJECTNUMBER$," & If(bOk, sInfo, ""))
+      bOk = EgtGetInfo(nBtlInfoId, BTL_GEN_PROJNAME, sInfo)
+      sFileText.Add("Var6=$PROJECTNAME$," & If(bOk, sInfo, ""))
+      bOk = EgtGetInfo(nBtlInfoId, BTL_GEN_CUSTOMER, sInfo)
+      sFileText.Add("Var7=$CUSTOMER$," & If(bOk, sInfo, ""))
+      bOk = EgtGetInfo(SelPart.nPartId, BTL_PRT_ASSEMBLYNUM, sInfo)
+      sFileText.Add("Var8=$ASSEMBLYNUMBER$," & If(bOk, sInfo, ""))
+      bOk = EgtGetInfo(SelPart.nPartId, BTL_PRT_ORDERNUM, sInfo)
+      sFileText.Add("Var9=$ORDERNUMBER$," & If(bOk, sInfo, ""))
+      bOk = EgtGetInfo(SelPart.nPartId, BTL_PRT_DESIGNATION, sInfo)
+      sFileText.Add("Var10=$DESIGNATION$," & If(bOk, sInfo, ""))
+      bOk = EgtGetInfo(SelPart.nPartId, BTL_PRT_ANNOTATION, sInfo)
+      sFileText.Add("Var11=$ANNOTATION$," & If(bOk, sInfo, ""))
+      sFileText.Add("Var12=$STOREY$," & SelPart.sSTOREY)
+      sFileText.Add("Var13=$GROUP$," & SelPart.sGROUP)
+      bOk = EgtGetInfo(SelPart.nPartId, BTL_PRT_PACKAGE, sInfo)
+      sFileText.Add("Var14=$PACKAGE$," & If(bOk, sInfo, ""))
+      sFileText.Add("Var15=$WHL$," & SelPart.sW & "x" & SelPart.sH & "x" & SelPart.sL)
+      sFileText.Add("Var16=$PRODUCTIONDATE$," & Date.Now().ToString("yyyy-MM-dd"))
+      ' calcolo numero settimana corrente secondo ISO 8601
+      Dim time As Date = Date.Now()
+      Dim Day As DayOfWeek = CultureInfo.InvariantCulture.Calendar.GetDayOfWeek(time)
+      If Day >= DayOfWeek.Monday AndAlso Day <= DayOfWeek.Wednesday Then time = time.AddDays(3)
+      Dim nWeekOfYear As Integer = CultureInfo.InvariantCulture.Calendar.GetWeekOfYear(time, CalendarWeekRule.FirstFourDayWeek, DayOfWeek.Monday)
+      sFileText.Add("Var17=$PRODUCTIONWEEK$," & nWeekOfYear)
+      bOk = EgtGetInfo(SelPart.nPartId, BTL_PRT_DESCRIPTION, sInfo)
+      sFileText.Add("Var18=$DESCRIPTION$," & If(bOk, sInfo, ""))
+      bOk = EgtGetInfo(SelPart.nPartId, BTL_PRT_QUALITYGRADE, sInfo)
+      sFileText.Add("Var19=$QUALITYGRADE$," & If(bOk, sInfo, ""))
+      bOk = EgtGetInfo(nBtlInfoId, BTL_GEN_BTLPATH, sInfo)
+      sFileText.Add("Var20=$BTLPATH$," & If(bOk, Path.GetFileNameWithoutExtension(sInfo), ""))
+
       Try
          File.WriteAllLines(sFilePath, sFileText)
       Catch ex As Exception

EgtBEAMWALL.Supervisor/MDIPage/MDIPageVM.vb

@@ -163,7 +163,7 @@ Public Class MDIPageVM
    ''' </summary>
    Friend Sub SendMDI()
       If Not String.IsNullOrWhiteSpace(m_sMDICommand_Text) Then
-         MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.MDI, m_sMDICommand_Text))
+         MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.MDI, m_sMDICommand_Text))
       End If
    End Sub
 

EgtBEAMWALL.Supervisor/MachCommandMessagePanel/MachCommandMessagePanelVM.vb

@@ -427,11 +427,11 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub Disconnect()
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.DISCONNECT))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.DISCONNECT))
    End Sub
 
    Public Sub SetOPState(OpState As Integer)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.SETOPMODE))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.SETOPMODE))
    End Sub
 
    Public ReadOnly Property Start_Command As ICommand
@@ -442,7 +442,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub Start(ByVal param As Object)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.START))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.START))
    End Sub
 
    Public ReadOnly Property Stop_Command As ICommand
@@ -453,7 +453,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub [Stop](ByVal param As Object)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOP_))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOP_))
    End Sub
 
    Public ReadOnly Property Reset_Command As ICommand
@@ -464,7 +464,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub Reset(ByVal param As Object)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.RESET))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.RESET))
       ' annullo stato di pronto ad essere lavorato di tutti i programmi
       If Not IsNothing(Map.refProjectVM.SupervisorMachGroupPanelVM) Then Map.refProjectVM.SupervisorMachGroupPanelVM.ResetAllMachGroups()
    End Sub
@@ -477,7 +477,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub [Step](ByVal param As Object)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STEP_))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STEP_))
    End Sub
 
    Public ReadOnly Property SetPoint_Command As ICommand
@@ -488,7 +488,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub SetPoint(ByVal param As Object)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.SETPOINT))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.SETPOINT))
    End Sub
 
 
@@ -500,7 +500,7 @@ Public Class MachCommandMessagePanelVM
    End Property
 
    Public Sub DeleteAlarms(ByVal param As Object)
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.DELETEALARMS))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.DELETEALARMS))
    End Sub
 
    Public Function GetVarPathByName(Name As String) As String
@@ -666,10 +666,17 @@ Public Class MachCommandMessagePanelVM
                ErrorAdditionalMsg = "Line Number"
                ErrorNumberMsg = "CN:"
             End If
+            Dim sErrorMessage As String = ErrorMessage
+            If bMsgTranslationActive Then
+               Dim sTranslatedMsg = MachMsg(MsgParagraphs.CNC, nErrorNumber)
+               If Not String.IsNullOrWhiteSpace(sTranslatedMsg) Then
+                  sErrorMessage = sTranslatedMsg
+               End If
+            End If
             ErrorLineMsg = "Number from the Cnc Block"
             AlarmMessage = If(nErrorNumber <> 0, ErrorNumberMsg & ": " & nErrorNumber & " - ", "") &
                            If(nErrorExtNumber <> 0, " - " & ErrorExtNumberMsg & ": " & nErrorExtNumber, "") &
-                           " " & ErrorMessage
+                           " " & sErrorMessage
          Case NUM_ErrorTypes.Drive_Error
             ErrorIndexMsg = "Azionamento: Asse"
             ErrorNumberMsg = "Ext"

EgtBEAMWALL.Supervisor/MachGroupPanel/MyMachGroupVM.vb

@@ -132,7 +132,7 @@ Public Class MyMachGroupVM
          EgtGetInfo(Id, MGR_RPT_PART & 1, sInfo)
          If Not String.IsNullOrWhiteSpace(sInfo) Then
             sSplitInfo = sInfo.Split(","c)
-            StringToDouble(sSplitInfo(1), MyMachGroupM.dStartCut)
+            StringToDoubleAdv(sSplitInfo(1), MyMachGroupM.dStartCut)
          Else
             MyMachGroupM.dStartCut = 0
          End If

EgtBEAMWALL.Supervisor/MachManagingThread/MachManaging.vb

@@ -10,6 +10,9 @@ Imports EgtBEAMWALL.Supervisor.CommVar
 
 Public Class MachManaging
 
+   ' lock per aggiunta elemento a lista MachGroup
+   Private Shared Lock_CommandList As New Object
+
    Private m_bConnected As Boolean = False
    Public ReadOnly Property bConnected As Boolean
       Get
@@ -53,6 +56,22 @@ Public Class MachManaging
          Return m_CommandList
       End Get
    End Property
+   Friend Shared Sub AddToCommandList(value As ThreadCommand)
+      SyncLock Lock_CommandList
+         ' EgtOutLog("Inizio ciclo rimozioni")
+         For CommandIndex = m_CommandList.Count - 1 To 0 Step -1
+            Dim Command As ThreadCommand = m_CommandList(CommandIndex)
+            If Command.ProcessingStatus = ThreadCommand.ProcessingStatuses.DONE Then
+               ' EgtOutLog("Inizio rimozione comando")
+               m_CommandList.Remove(Command)
+               ' EgtOutLog("Fine rimozione comando")
+            End If
+         Next
+         ' EgtOutLog("Fine ciclo rimozioni")
+         CommandList.Add(value)
+         ' EgtOutLog("Count dopo aggiunta: " & CommandList.Count)
+      End SyncLock
+   End Sub
 
    Private m_bStartPending As Boolean = False
    Public ReadOnly Property StartPending As Boolean
@@ -286,70 +305,59 @@ Public Class MachManaging
                   Dim dTemp As Double = 0
                   Dim nTemp As Integer = 0
                   If Not IsNothing(ResetVariable.sValue) Then
-                     StringToDouble(ResetVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nReset_State)
+                     Integer.TryParse(ResetVariable.sValue, nReset_State)
                   Else
                      nReset_State = 1
                   End If
                   If Not IsNothing(StartVariable.sValue) Then
-                     StringToDouble(StartVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nTemp)
+                     Integer.TryParse(StartVariable.sValue, nTemp)
                      nStart_State = (nTemp = 1)
                   Else
                      nStart_State = -1
                   End If
                   If Not IsNothing(StopVariable.sValue) Then
-                     StringToDouble(StopVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nTemp)
+                     Integer.TryParse(StopVariable.sValue, nTemp)
                      nStop_State = (nTemp = 1)
                   Else
                      nStop_State = -1
                   End If
                   If Not IsNothing(ProdVariable.sValue) Then
-                     StringToDouble(ProdVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nP_Prod)
+                     Integer.TryParse(ProdVariable.sValue, nP_Prod)
                   Else
                      nP_Prod = -1
                   End If
                   If Not IsNothing(MachGroupVariable.sValue) Then
-                     StringToDouble(MachGroupVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nP_Machgroup)
+                     Integer.TryParse(MachGroupVariable.sValue, nP_Machgroup)
                   Else
                      nP_Machgroup = -1
                   End If
                   If Not IsNothing(PartVariable.sValue) Then
-                     StringToDouble(PartVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nP_Part)
+                     Integer.TryParse(PartVariable.sValue, nP_Part)
                   Else
                      nP_Part = -1
                   End If
                   If Not IsNothing(StateVariable.sValue) Then
-                     StringToDouble(StateVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nP_State)
+                     Integer.TryParse(StateVariable.sValue, nP_State)
                   Else
                      nP_State = -1
                   End If
                   If Not IsNothing(ISONumVariable.sValue) Then
-                     StringToDouble(ISONumVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nISO_Num)
+                     Integer.TryParse(ISONumVariable.sValue, nISO_Num)
                   Else
                      nISO_Num = -1
                   End If
                   If Not IsNothing(ISOSentVariable.sValue) Then
-                     StringToDouble(ISOSentVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nISO_Sent)
+                     Integer.TryParse(ISOSentVariable.sValue, nISO_Sent)
                   Else
                      nISO_Sent = -1
                   End If
                   If Not IsNothing(RunningVariable.sValue) Then
-                     StringToDouble(RunningVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nRunning)
+                     Integer.TryParse(RunningVariable.sValue, nRunning)
                   Else
                      nRunning = -1
                   End If
                   If Not IsNothing(MachIndexVariable.sValue) Then
-                     StringToDouble(MachIndexVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nCurrMachIndex)
+                     Integer.TryParse(MachIndexVariable.sValue, nCurrMachIndex)
                   Else
                      nCurrMachIndex = -1
                   End If
@@ -366,70 +374,59 @@ Public Class MachManaging
                   Dim dTemp As Double = 0
                   Dim nTemp As Integer = 0
                   If Not IsNothing(ResetVariable.sValue) Then
-                     StringToDouble(ResetVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nReset_State)
+                     Integer.TryParse(ResetVariable.sValue, nReset_State)
                   Else
                      nReset_State = 1
                   End If
                   If Not IsNothing(StartVariable.sValue) Then
-                     StringToDouble(StartVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nTemp)
+                     Integer.TryParse(StartVariable.sValue, nTemp)
                      nStart_State = (nTemp = 1)
                   Else
                      nStart_State = -1
                   End If
                   If Not IsNothing(StopVariable.sValue) Then
-                     StringToDouble(StopVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nTemp)
+                     Integer.TryParse(StopVariable.sValue, nTemp)
                      nStop_State = (nTemp = 1)
                   Else
                      nStop_State = -1
                   End If
                   If Not IsNothing(ProdVariable.sValue) Then
-                     StringToDouble(ProdVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nP_Prod)
+                     Integer.TryParse(ProdVariable.sValue, nP_Prod)
                   Else
                      nP_Prod = -1
                   End If
                   If Not IsNothing(MachGroupVariable.sValue) Then
-                     StringToDouble(MachGroupVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nP_Machgroup)
+                     Integer.TryParse(MachGroupVariable.sValue, nP_Machgroup)
                   Else
                      nP_Machgroup = -1
                   End If
                   If Not IsNothing(PartVariable.sValue) Then
-                     StringToDouble(PartVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nP_Part)
+                     Integer.TryParse(PartVariable.sValue, nP_Part)
                   Else
                      nP_Part = -1
                   End If
                   If Not IsNothing(StateVariable.sValue) Then
-                     StringToDouble(StateVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nP_State)
+                     Integer.TryParse(StateVariable.sValue, nP_State)
                   Else
                      nP_State = -1
                   End If
                   If Not IsNothing(ISONumVariable.sValue) Then
-                     StringToDouble(ISONumVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nISO_Num)
+                     Integer.TryParse(ISONumVariable.sValue, nISO_Num)
                   Else
                      nISO_Num = -1
                   End If
                   If Not IsNothing(ISOSentVariable.sValue) Then
-                     StringToDouble(ISOSentVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nISO_Sent)
+                     Integer.TryParse(ISOSentVariable.sValue, nISO_Sent)
                   Else
                      nISO_Sent = -1
                   End If
                   If Not IsNothing(RunningVariable.sValue) Then
-                     StringToDouble(RunningVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nRunning)
+                     Integer.TryParse(RunningVariable.sValue, nRunning)
                   Else
                      nRunning = -1
                   End If
                   If Not IsNothing(MachIndexVariable.sValue) Then
-                     StringToDouble(MachIndexVariable.sValue, dTemp)
-                     Integer.TryParse(dTemp, nCurrMachIndex)
+                     Integer.TryParse(MachIndexVariable.sValue, nCurrMachIndex)
                   Else
                      nCurrMachIndex = -1
                   End If
@@ -469,7 +466,7 @@ Public Class MachManaging
                Else
                   OpState = OPStates.End
                End If
-               If OpState <> Map.refLeftPanelVM.SelOPState.Id Then
+               If IsNothing(Map.refLeftPanelVM.SelOPState) OrElse OpState <> Map.refLeftPanelVM.SelOPState.Id Then
                   m_OpStateCallbackDlg(OpState)
                End If
             End If
@@ -540,27 +537,33 @@ Public Class MachManaging
                   Dim MachGroup As MyMachGroupVM = Map.refProjectVM.SupervisorMachGroupPanelVM.MachGroupVMList.FirstOrDefault(Function(x) x.Id = nP_Machgroup)
                   ' se pezzo = -1 devo dare start a tutti i pezzi del MachGroup
                   If nP_Part = -1 Then
-                     For Each Part In MachGroup.PartVMList
-                        ' scrivo data start su Db pezzo
-                        DbControllers.m_PartController.UpdateStart(nP_Prod, nP_Machgroup, Part.nPartId, dtStart)
-                        DbControllers.m_PartController.UpdateStatus(nP_Prod, nP_Machgroup, Part.nPartId, ItemState.WIP)
-                        ' scrivo stato start
-                        Part.nProduction_State = ItemState.WIP
-                        Part.dtStartTime = dtStart
-                        Part.NotifyPropertyChanged(NameOf(Part.nProduction_State))
-                        ' scrivo evento inizio pezzo su DB
-                        DbControllers.m_LogMachineController.Create(LogEvent.CreatePartStateLog(dtStart, nP_Prod, nP_Machgroup, Part.nPartId, nP_State, DbControllers.SupervisorId))
-                     Next
+                     If Not IsNothing(MachGroup) Then
+                        For Each Part In MachGroup.PartVMList
+                           ' scrivo data start su Db pezzo
+                           DbControllers.m_PartController.UpdateStart(nP_Prod, nP_Machgroup, Part.nPartId, dtStart)
+                           DbControllers.m_PartController.UpdateStatus(nP_Prod, nP_Machgroup, Part.nPartId, ItemState.WIP)
+                           ' scrivo stato start
+                           Part.nProduction_State = ItemState.WIP
+                           Part.dtStartTime = dtStart
+                           Part.NotifyPropertyChanged(NameOf(Part.nProduction_State))
+                           ' scrivo evento inizio pezzo su DB
+                           DbControllers.m_LogMachineController.Create(LogEvent.CreatePartStateLog(dtStart, nP_Prod, nP_Machgroup, Part.nPartId, nP_State, DbControllers.SupervisorId))
+                        Next
+                     End If
                   Else
                      ' scrivo data start su Db pezzo
                      DbControllers.m_PartController.UpdateStart(nP_Prod, nP_Machgroup, nP_Part, dtStart)
                      DbControllers.m_PartController.UpdateStatus(nP_Prod, nP_Machgroup, nP_Part, ItemState.WIP)
-                     ' recupero pezzo
-                     Dim Part As PartVM = MachGroup.PartVMList.FirstOrDefault(Function(x) x.nPartId = nP_Part)
-                     ' scrivo stato start
-                     Part.nProduction_State = ItemState.WIP
-                     Part.dtStartTime = dtStart
-                     Part.NotifyPropertyChanged(NameOf(Part.nProduction_State))
+                     If Not IsNothing(MachGroup) Then
+                        ' recupero pezzo
+                        Dim Part As PartVM = MachGroup.PartVMList.FirstOrDefault(Function(x) x.nPartId = nP_Part)
+                        If Not IsNothing(Part) Then
+                           ' scrivo stato start
+                           Part.nProduction_State = ItemState.WIP
+                           Part.dtStartTime = dtStart
+                           Part.NotifyPropertyChanged(NameOf(Part.nProduction_State))
+                        End If
+                     End If
                      ' scrivo evento inizio pezzo su DB
                      DbControllers.m_LogMachineController.Create(LogEvent.CreatePartStateLog(dtStart, nP_Prod, nP_Machgroup, nP_Part, nP_State, DbControllers.SupervisorId))
                   End If
@@ -577,9 +580,11 @@ Public Class MachManaging
                      DbControllers.m_MachGroupController.UpdateStart(nP_Prod, nP_Machgroup, dtStart)
                      DbControllers.m_MachGroupController.UpdateStatus(nP_Prod, nP_Machgroup, ItemState.WIP)
                      ' scrivo stato start
-                     MachGroup.MyMachGroupM.SetProductionState(ItemState.WIP)
-                     MachGroup.dtStartTime = dtStart
-                     MachGroup.NotifyPropertyChanged(NameOf(MachGroup.nProduction_State))
+                     If Not IsNothing(MachGroup) Then
+                        MachGroup.MyMachGroupM.SetProductionState(ItemState.WIP)
+                        MachGroup.dtStartTime = dtStart
+                        MachGroup.NotifyPropertyChanged(NameOf(MachGroup.nProduction_State))
+                     End If
                      ' scrivo evento inizio MachGroup su DB
                      DbControllers.m_LogMachineController.Create(LogEvent.CreateMachGroupStateLog(dtStart, nP_Prod, nP_Machgroup, nP_State, DbControllers.SupervisorId))
                   End If
@@ -591,44 +596,50 @@ Public Class MachManaging
                   Dim MachGroup As MyMachGroupVM = Map.refProjectVM.SupervisorMachGroupPanelVM.MachGroupVMList.FirstOrDefault(Function(x) x.Id = nP_Machgroup)
                   ' se pezzo = -1 devo dare end a tutti i pezzi del MachGroup
                   If nP_Part = -1 Then
-                     For Each Part In MachGroup.PartVMList
-                        ' scrivo data end su Db pezzo
-                        DbControllers.m_PartController.UpdateEnd(nP_Prod, nP_Machgroup, Part.nPartId, dtEnd)
-                        DbControllers.m_PartController.UpdateStatus(nP_Prod, nP_Machgroup, Part.nPartId, ItemState.Produced)
-                        ' scrivo stato end
-                        Part.nProduction_State = ItemState.Produced
-                        Part.dtEndTime = dtEnd
-                        Part.NotifyPropertyChanged(NameOf(Part.nProduction_State))
-                        ' resetto stato redo
-                        Part.bRedo = False
-                        ' se non impostata data start
-                        If Part.dtStartTime = DateTime.MinValue Then
-                           ' scrivo data start su Db pezzo
-                           Dim dtStart As DateTime = Part.dtEndTime - TimeSpan.FromSeconds(60)
-                           DbControllers.m_PartController.UpdateStart(nP_Prod, nP_Machgroup, Part.nPartId, dtStart)
-                           Part.dtStartTime = dtStart
-                        End If
-                        ' scrivo evento fine pezzo su DB
-                        DbControllers.m_LogMachineController.Create(LogEvent.CreatePartStateLog(dtEnd, nP_Prod, nP_Machgroup, Part.nPartId, nP_State, DbControllers.SupervisorId))
-                     Next
+                     If Not IsNothing(MachGroup) Then
+                        For Each Part In MachGroup.PartVMList
+                           ' scrivo data end su Db pezzo
+                           DbControllers.m_PartController.UpdateEnd(nP_Prod, nP_Machgroup, Part.nPartId, dtEnd)
+                           DbControllers.m_PartController.UpdateStatus(nP_Prod, nP_Machgroup, Part.nPartId, ItemState.Produced)
+                           ' scrivo stato end
+                           Part.nProduction_State = ItemState.Produced
+                           Part.dtEndTime = dtEnd
+                           Part.NotifyPropertyChanged(NameOf(Part.nProduction_State))
+                           ' resetto stato redo
+                           Part.bRedo = False
+                           ' se non impostata data start
+                           If Part.dtStartTime = DateTime.MinValue Then
+                              ' scrivo data start su Db pezzo
+                              Dim dtStart As DateTime = Part.dtEndTime - TimeSpan.FromSeconds(60)
+                              DbControllers.m_PartController.UpdateStart(nP_Prod, nP_Machgroup, Part.nPartId, dtStart)
+                              Part.dtStartTime = dtStart
+                           End If
+                           ' scrivo evento fine pezzo su DB
+                           DbControllers.m_LogMachineController.Create(LogEvent.CreatePartStateLog(dtEnd, nP_Prod, nP_Machgroup, Part.nPartId, nP_State, DbControllers.SupervisorId))
+                        Next
+                     End If
                   Else
                      ' scrivo data end su Db pezzo
                      DbControllers.m_PartController.UpdateEnd(nP_Prod, nP_Machgroup, nP_Part, dtEnd)
                      DbControllers.m_PartController.UpdateStatus(nP_Prod, nP_Machgroup, nP_Part, ItemState.Produced)
-                     ' recupero pezzo
-                     Dim Part As PartVM = MachGroup.PartVMList.FirstOrDefault(Function(x) x.nPartId = nP_Part)
-                     ' scrivo stato end
-                     Part.nProduction_State = ItemState.Produced
-                     Part.dtEndTime = dtEnd
-                     Part.NotifyPropertyChanged(NameOf(Part.nProduction_State))
-                     ' resetto stato redo
-                     Part.bRedo = False
+                     If Not IsNothing(MachGroup) Then
+                        ' recupero pezzo
+                        Dim Part As PartVM = MachGroup.PartVMList.FirstOrDefault(Function(x) x.nPartId = nP_Part)
+                        If Not IsNothing(Part) Then
+                           ' scrivo stato end
+                           Part.nProduction_State = ItemState.Produced
+                           Part.dtEndTime = dtEnd
+                           Part.NotifyPropertyChanged(NameOf(Part.nProduction_State))
+                           ' resetto stato redo
+                           Part.bRedo = False
+                        End If
+                     End If
                      ' scrivo evento fine pezzo su DB
                      DbControllers.m_LogMachineController.Create(LogEvent.CreatePartStateLog(dtEnd, nP_Prod, nP_Machgroup, nP_Part, nP_State, DbControllers.SupervisorId))
                   End If
 
                   ' se tutti i pezzi della barra sono in end
-                  If MachGroup.PartVMList.All(Function(x) x.nProduction_State >= 2) Then
+                  If Not IsNothing(MachGroup) AndAlso MachGroup.PartVMList.All(Function(x) x.nProduction_State >= 2) Then
                      ' scrivo data end su Db barra
                      DbControllers.m_MachGroupController.UpdateEnd(nP_Prod, nP_Machgroup, dtEnd)
                      DbControllers.m_MachGroupController.UpdateStatus(nP_Prod, nP_Machgroup, ItemState.Produced)
@@ -646,7 +657,7 @@ Public Class MachManaging
 
                      ' se non impostata data start
                      If MachGroup.dtStartTime = DateTime.MinValue Then
-                        EgtOutLog("Start date not set on Prod " & nP_Prod & " Machgroup " & nP_Machgroup)
+                        ' EgtOutLog("Start date not set on Prod " & nP_Prod & " Machgroup " & nP_Machgroup)
                         Dim dtStart As DateTime = MachGroup.dtEndTime - TimeSpan.FromSeconds(60)
                         ' provo a recuperare tempo stimato
                         If MachGroup.nCALC_TIME > 0 Then
@@ -674,13 +685,17 @@ Public Class MachManaging
                   End If
                   ' se pezzo = -1 stampo etichette di tutti i pezzi del MachGroup
                   If nP_Part = -1 Then
-                     For Each Part In MachGroup.PartVMList
-                        Map.refLeftPanelVM.PrintLabel(MachGroup, Part)
-                     Next
+                     If Not IsNothing(MachGroup) Then
+                        For Each Part In MachGroup.PartVMList
+                           Map.refLeftPanelVM.PrintLabel(MachGroup, Part)
+                        Next
+                     End If
                   Else
                      ' recupero pezzo
                      Dim Part As PartVM = MachGroup.PartVMList.FirstOrDefault(Function(x) x.nPartId = nP_Part)
-                     Map.refLeftPanelVM.PrintLabel(MachGroup, Part)
+                     If Not IsNothing(Part) Then
+                        Map.refLeftPanelVM.PrintLabel(MachGroup, Part)
+                     End If
                   End If
                   ' attesa per essere sicuro che abbia scritto e riletto variabili
                   Threading.Thread.Sleep(300)
@@ -706,7 +721,7 @@ Public Class MachManaging
                   For VParIndex = 1 To sVs.Length - 1
                      Dim VPar() As String = sVs(VParIndex).Split("="c)
                      VPar(1) = VPar(1).Trim
-                     StringToDouble(VPar(1), dVPars(VParIndex - 1))
+                     StringToDoubleAdv(VPar(1), dVPars(VParIndex - 1))
                   Next
                   ' li scrivo nel CN
                   For Index As Integer = 1 To 10
@@ -726,7 +741,7 @@ Public Class MachManaging
    End Function
 
    Private Function SendNextProgram() As Boolean
-      EgtOutLog("Inizio SendNextProgram")
+      ' EgtOutLog("Inizio SendNextProgram")
       Dim bSent As Boolean = False
       If (CurrentMachine.NCType = NCTypes.TPA AndAlso Not m_bStartPending AndAlso Tpa.opState = MachineOperatingState.Pending) OrElse
          (CurrentMachine.NCType = NCTypes.NUM_FLEXIUM AndAlso Not Num_Flexium.bIsTransferActive) OrElse
@@ -734,20 +749,20 @@ Public Class MachManaging
          (CurrentMachine.NCType = NCTypes.NUM_AXIUM_PCTOOLKIT AndAlso Not Num_Axium_PCToolkit.bIsTransferActive) Then ' Or Tpa.opState = MachineOperatingState.Start) Then
          ' verifico se c'e' un programma da lanciare
          If Not IsNothing(Map.refProjectVM.SupervisorMachGroupPanelVM) Then
-            EgtOutLog("Start " & DateTime.Now())
+            ' EgtOutLog("Start " & DateTime.Now())
             Dim bMachGroupNotReady As Boolean = False
             SyncLock m_Lock_SendProgram
                For Each MyMachGroup As MyMachGroupVM In Map.refProjectVM.SupervisorMachGroupPanelVM.MachGroupVMList
-                  EgtOutLog("Ciclo su name: " & MyMachGroup.Name & " id: " & MyMachGroup.Id)
+                  ' EgtOutLog("Ciclo su name: " & MyMachGroup.Name & " id: " & MyMachGroup.Id)
                   If Not MyMachGroup.bSentToMachine AndAlso (MyMachGroup.dtStartTime = DateTime.MinValue OrElse
                      (Map.refSupervisorManagerVM.CurrProd.nType = BWType.WALL AndAlso MyMachGroup.bResetWhileCutting)) Then
-                     EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " è da fare")
+                     ' EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " è da fare")
                      ' verifico se ricalcolo finito
                      If MyMachGroup.bReadyForMachining AndAlso If(CurrentMachine.NCType = NCTypes.NUM_FLEXIUM Or CurrentMachine.NCType = NCTypes.NUM_AXIUM_APSERVER OrElse CurrentMachine.NCType = NCTypes.NUM_AXIUM_PCTOOLKIT, Not MyMachGroup.bSendingToMachine, True) Then
-                        EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " pronto per essere lavorato")
+                        ' EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " pronto per essere lavorato")
                         ' lo lancio
                         bSent = SendProgram(MyMachGroup.CnFilePath(), MyMachGroup.Name)
-                        EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " mandato " & DateTime.Now() & " " & MyMachGroup.Name & " " & bSent.ToString())
+                        ' EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " mandato " & DateTime.Now() & " " & MyMachGroup.Name & " " & bSent.ToString())
                         Select Case CurrentMachine.NCType
                            Case NCTypes.TPA
                               MyMachGroup.SetSentToMachine(bSent)
@@ -759,7 +774,7 @@ Public Class MachManaging
                      Else
                         ' programma non ancora pronto, esco per attendere
                         bMachGroupNotReady = True
-                        EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " non ancora pronto per essere mandato")
+                        ' EgtOutLog(MyMachGroup.Name & " id: " & MyMachGroup.Id & " non ancora pronto per essere mandato")
                         Exit For
                         'Return False
                      End If
@@ -767,7 +782,7 @@ Public Class MachManaging
                Next
             End SyncLock
             If bMachGroupNotReady Then Return False
-            EgtOutLog("End " & DateTime.Now())
+            ' EgtOutLog("End " & DateTime.Now())
          End If
       End If
       Return bSent
@@ -775,10 +790,17 @@ Public Class MachManaging
 
    Private Sub CommandList_CollectionChanged(sender As Object, e As NotifyCollectionChangedEventArgs)
       If Not IsNothing(e.NewItems) Then
-         For Each Command In e.NewItems
-            ExecuteCommand(DirectCast(Command, ThreadCommand))
-            m_CommandList.Remove(Command)
+         ' EgtOutLog("Inizio ciclo esecuzione comandi")
+         Dim nCommandCount As Integer = e.NewItems.Count
+         For CommandIndex = 0 To nCommandCount - 1
+            Dim Command As ThreadCommand = e.NewItems(CommandIndex)
+            If Command.ProcessingStatus = ThreadCommand.ProcessingStatuses.WAITING Then
+               Command.SetProcessingStatus(ThreadCommand.ProcessingStatuses.PROCESSING)
+               ExecuteCommand(DirectCast(Command, ThreadCommand))
+               Command.SetProcessingStatus(ThreadCommand.ProcessingStatuses.DONE)
+            End If
          Next
+         ' EgtOutLog("Fine ciclo esecuzione di " & nCommandCount & " comandi")
       End If
    End Sub
 
@@ -807,6 +829,7 @@ Public Class MachManaging
          Case CommandTypes.READ_TPA
             Tpa.RWVariableManager.RefreshVar(Command.sVariable)
          Case CommandTypes.WRITE
+            'EgtOutLog("Write" & Command.sVariable & " " & Command.sVariables(1) & " " & Command.nVariable)
             WriteVar(Command.sVariable, Command.sVariables(1), Command.nVariable)
          Case CommandTypes.DELETEALARMS
             DeleteAlarms()
@@ -1047,7 +1070,7 @@ Public Class MachManaging
             Num_Axium_APServer.StartTransfer()
             Return True
          Case NCTypes.NUM_AXIUM_PCTOOLKIT
-            EgtOutLog("Pre Download")
+            ' EgtOutLog("Pre Download")
             Dim nFileType As Integer = 0
             If Integer.TryParse(ProgramId, nFileType) AndAlso nFileType > 0 Then
                Num_Axium_PCToolkit.FileDownload(nFileType * 10, ProgramPath)
@@ -1227,10 +1250,8 @@ Public Class MachManaging
          Dim nIndex As Integer = Index
          Dim PLCMessagesVariable As Variable = Map.refMachCommandMessagePanelVM.MainVariablesList.FirstOrDefault(Function(x) x.sName = PLC_MESSAGES & nIndex)
          If IsNothing(PLCMessagesVariable) OrElse IsNothing(PLCMessagesVariable.sValue) Then Return
-         Dim dTemp As Double = 0
          Dim nTemp As Integer = 0
-         StringToDouble(PLCMessagesVariable.sValue, dTemp)
-         Integer.TryParse(dTemp, nTemp)
+         Integer.TryParse(PLCMessagesVariable.sValue, nTemp)
          Dim Bytes As Byte() = BitConverter.GetBytes(nTemp)
          Dim NewBytes As Byte() = BitConverter.GetBytes(nTemp)
          For nBIndex = Bytes.Count - 1 To 0 Step -1

EgtBEAMWALL.Supervisor/MachManagingThread/MachManagingThread.vb

@@ -54,6 +54,12 @@ End Class
 
 Public Class ThreadCommand
 
+   Public Enum ProcessingStatuses
+      WAITING = 1
+      PROCESSING = 2
+      DONE = 3
+   End Enum
+
    Private m_CommandType As CommandTypes
    Public ReadOnly Property CommandType As CommandTypes
       Get
@@ -95,6 +101,16 @@ Public Class ThreadCommand
       End Get
    End Property
 
+   Private m_ProcessingStatus As ProcessingStatuses = ProcessingStatuses.WAITING
+   Public ReadOnly Property ProcessingStatus As ProcessingStatuses
+      Get
+         Return m_ProcessingStatus
+      End Get
+   End Property
+   Friend Sub SetProcessingStatus(value As ProcessingStatuses)
+      m_ProcessingStatus = value
+   End Sub
+
    Protected Sub New()
    End Sub
 

EgtBEAMWALL.Supervisor/MachManagingThread/RWVariableManager.vb

@@ -148,7 +148,7 @@ Public Class RWVariableManager
    Public Sub ReadVar(Name As String, ByRef Value As Double)
       Dim nIndex As Integer = GetIndexFromName(Name)
       If nIndex >= 0 Then
-         Value = StringToDouble(m_ReadedVars(nIndex), 5)
+         Value = StringToDoubleAdv(m_ReadedVars(nIndex), 5)
       Else
          Value = -999999999
       End If

EgtBEAMWALL.Supervisor/MachineLogPage/MachineLogPageV.xaml

@@ -25,16 +25,37 @@
       </Grid>
 
       <StackPanel Orientation="Horizontal" Height="30">
+         <TextBlock Text="{Binding Entity_Msg}"
+                    Style="{StaticResource Log_TextBlock}"/>
          <ComboBox ItemsSource="{Binding EntityTypeList}"
                    SelectedIndex="{Binding SelEntityType}"
                    Width="70"
                    Margin="0,0,2.5,0"
                    Style="{StaticResource PartParam_ComboBox}"/>
+         <TextBlock Text="{Binding Event_Msg}"
+                    Style="{StaticResource Log_TextBlock}"/>
          <ComboBox ItemsSource="{Binding PartEventTypeList}"
                    SelectedIndex="{Binding SelPartEventType}"
                    Width="70"
                    Margin="0,0,2.5,0"
                    Style="{StaticResource PartParam_ComboBox}"/>
+         <TextBlock Text="{Binding Date_Msg}"
+                    Style="{StaticResource Log_TextBlock}"/>
+         <ComboBox ItemsSource="{Binding DayTypeList}"
+                   SelectedIndex="{Binding SelDayType}"
+                   Width="70"
+                   Margin="0,0,2.5,0"
+                   Style="{StaticResource PartParam_ComboBox}"/>
+         <StackPanel Orientation="Horizontal" Visibility="{Binding Date_Visibility}">
+            <TextBlock Text="{Binding From_Msg}"
+                       Style="{StaticResource Log_TextBlock}"/>
+            <DatePicker SelectedDate="{Binding dtStartDate}"
+                        Style="{StaticResource Log_DatePicker}"/>
+            <TextBlock Text="{Binding To_Msg}"
+                       Style="{StaticResource Log_TextBlock}"/>
+            <DatePicker SelectedDate="{Binding dtEndDate}"
+                        Style="{StaticResource Log_DatePicker}"/>
+         </StackPanel>
          <!--<TextBox Text="{Binding MaxRowNumber}"/>-->
          <Button Grid.Column="1"
                  Command="{Binding Refresh_Command}"

EgtBEAMWALL.Supervisor/MachineLogPage/MachineLogPageVM.vb

@@ -9,6 +9,12 @@ Imports EgtBEAMWALL.Core.MachLog
 Public Class MachineLogPageVM
    Inherits VMBase
 
+   Private Enum DayTypes As Integer
+      TODAY = 0
+      YESTERDAY = 1
+      PERIOD = 2
+   End Enum
+
    Private m_colMachineLog_Type As EgtDataGridColumn
    Public ReadOnly Property colMachineLog_Type As EgtDataGridColumn
       Get
@@ -62,7 +68,7 @@ Public Class MachineLogPageVM
       End Set
    End Property
 
-   Private m_PartEventTypeList As New List(Of String)({"", "Inizio", "Fine"})
+   Private m_PartEventTypeList As New List(Of String)({"", EgtMsg(62527), EgtMsg(62528)})
    Public ReadOnly Property PartEventTypeList As List(Of String)
       Get
          Return m_PartEventTypeList
@@ -76,11 +82,12 @@ Public Class MachineLogPageVM
       End Get
       Set(value As Integer)
          m_SelPartEventType = value
+         WriteMainPrivateProfileString(S_MACHINELOGFILTER, K_PARTEVENTTYPE, m_SelPartEventType.ToString())
          m_MachineLogList_View.Refresh()
       End Set
    End Property
 
-   Private m_EntityTypeList As New List(Of String)({"", "Pezzo", "Barra"})
+   Private m_EntityTypeList As New List(Of String)({"", EgtMsg(62525), EgtMsg(62526)})
    Public ReadOnly Property EntityTypeList As List(Of String)
       Get
          Return m_EntityTypeList
@@ -94,10 +101,75 @@ Public Class MachineLogPageVM
       End Get
       Set(value As Integer)
          m_SelEntityType = value
+         WriteMainPrivateProfileString(S_MACHINELOGFILTER, K_ENTITYTYPE, m_SelEntityType.ToString())
          m_MachineLogList_View.Refresh()
       End Set
    End Property
 
+   Private m_DayTypeList As New List(Of String)({EgtMsg(62529), EgtMsg(62530), EgtMsg(62531)})
+   Public ReadOnly Property DayTypeList As List(Of String)
+      Get
+         Return m_DayTypeList
+      End Get
+   End Property
+
+   Private m_SelDayType As DayTypes = DayTypes.TODAY
+   Public Property SelDayType As Integer
+      Get
+         Return m_SelDayType
+      End Get
+      Set(value As Integer)
+         Dim PrevSelDayType As DayTypes = m_SelDayType
+         m_SelDayType = value
+         WriteMainPrivateProfileString(S_MACHINELOGFILTER, K_DAYTYPE, Convert.ToInt32(m_SelDayType))
+         m_Date_Visibility = If(m_SelDayType = DayTypes.PERIOD, Visibility.Visible, Visibility.Collapsed)
+         If m_SelDayType = DayTypes.PERIOD Then
+            m_dtStartDate = If(PrevSelDayType = DayTypes.TODAY, DateTime.Today, DateTime.Today - TimeSpan.FromDays(1))
+            m_dtEndDate = If(PrevSelDayType = DayTypes.TODAY, DateTime.Today, DateTime.Today - TimeSpan.FromDays(1))
+            NotifyPropertyChanged(NameOf(dtStartDate))
+            NotifyPropertyChanged(NameOf(dtEndDate))
+         End If
+         NotifyPropertyChanged(NameOf(Date_Visibility))
+         ' aggiorno lista da Db
+         UpdateMachineLogList()
+      End Set
+   End Property
+
+   Private m_dtStartDate As DateTime = DateTime.Today
+   Public Property dtStartDate As DateTime
+      Get
+         Return m_dtStartDate
+      End Get
+      Set(value As DateTime)
+         m_dtStartDate = value
+         Dim lStartDate As Long = m_dtStartDate.ToFileTimeUtc()
+         WriteMainPrivateProfileString(S_MACHINELOGFILTER, K_STARTDATE, lStartDate.ToString())
+         ' aggiorno lista da Db
+         UpdateMachineLogList()
+      End Set
+   End Property
+
+   Private m_dtEndDate As DateTime = DateTime.Today
+   Public Property dtEndDate As DateTime
+      Get
+         Return m_dtEndDate
+      End Get
+      Set(value As DateTime)
+         m_dtEndDate = value
+         Dim lEndDate As Long = m_dtEndDate.ToFileTimeUtc()
+         WriteMainPrivateProfileString(S_MACHINELOGFILTER, K_ENDDATE, lEndDate.ToString())
+         ' aggiorno lista da Db
+         UpdateMachineLogList()
+      End Set
+   End Property
+
+   Private m_Date_Visibility As Visibility = Visibility.Collapsed
+   Public ReadOnly Property Date_Visibility As Visibility
+      Get
+         Return m_Date_Visibility
+      End Get
+   End Property
+
    ' Definizione comandi
    Private m_cmdRefresh As ICommand
 
@@ -151,6 +223,35 @@ Public Class MachineLogPageVM
       End Get
    End Property
 
+   Public ReadOnly Property Entity_Msg As String
+      Get
+         Return EgtMsg(62520)
+      End Get
+   End Property
+
+   Public ReadOnly Property Event_Msg As String
+      Get
+         Return EgtMsg(62521)
+      End Get
+   End Property
+
+   Public ReadOnly Property Date_Msg As String
+      Get
+         Return EgtMsg(62522)
+      End Get
+   End Property
+
+   Public ReadOnly Property From_Msg As String
+      Get
+         Return EgtMsg(62523)
+      End Get
+   End Property
+
+   Public ReadOnly Property To_Msg As String
+      Get
+         Return EgtMsg(62524)
+      End Get
+   End Property
 
 #End Region    ' Messages
 
@@ -167,41 +268,63 @@ Public Class MachineLogPageVM
       m_colMachineLog_Type = m_MachineLogColumns.FirstOrDefault(Function(x) x.Name = COL_TYPE)
       m_colMachineLog_Description = m_MachineLogColumns.FirstOrDefault(Function(x) x.Name = COL_DESCRIPTION)
       m_colMachineLog_SupervisorId = m_MachineLogColumns.FirstOrDefault(Function(x) x.Name = COL_SUPERVISORID)
+      ' imposto valori filtri da ini
+      m_SelPartEventType = GetMainPrivateProfileInt(S_MACHINELOGFILTER, K_PARTEVENTTYPE, 2)
+      m_SelEntityType = GetMainPrivateProfileInt(S_MACHINELOGFILTER, K_ENTITYTYPE, 1)
+      m_SelDayType = GetMainPrivateProfileInt(S_MACHINELOGFILTER, K_DAYTYPE, 0)
+      Select Case m_SelDayType
+         Case DayTypes.TODAY
+            m_dtStartDate = DateTime.Today
+            m_dtEndDate = DateTime.Today
+         Case DayTypes.YESTERDAY
+            m_dtStartDate = DateTime.Today - TimeSpan.FromDays(1)
+            m_dtEndDate = DateTime.Today - TimeSpan.FromDays(1)
+         Case DayTypes.PERIOD
+            Dim sStartDate As String = "0"
+            Dim lStartDate As Long = 0
+            GetMainPrivateProfileString(S_MACHINELOGFILTER, K_STARTDATE, 0, sStartDate)
+            Long.TryParse(sStartDate, lStartDate)
+            m_dtStartDate = If(lStartDate > 0, DateTime.FromFileTimeUtc(lStartDate), DateTime.Today)
+            Dim sEndDate As String = "0"
+            Dim lEndDate As Long = 0
+            GetMainPrivateProfileString(S_MACHINELOGFILTER, K_ENDDATE, 0, sEndDate)
+            Long.TryParse(sEndDate, lEndDate)
+            m_dtEndDate = If(lEndDate > 0, DateTime.FromFileTimeUtc(lEndDate), DateTime.Today)
+            m_Date_Visibility = Visibility.Visible
+      End Select
    End Sub
 
 #End Region    ' CONSTRUCTORS
 
 #Region "METHODS"
 
-   Private Function MachineLogFilter(LogEvent As Object) As Boolean
-      Dim CurrLogEvent As LogEvent = DirectCast(LogEvent, LogEvent)
+   Private Function MachineLogFilter(CurrEvent As Object) As Boolean
+      Dim CurrLogEvent As LogEvent = DirectCast(CurrEvent, LogEvent)
       Dim bOk As Boolean = True
-      Select Case m_SelEntityType
-         Case 0
-            bOk = bOk And True
-         Case 1
-            bOk = bOk And CurrLogEvent.EventType = MachLogTypes.PART_STATUS
-         Case 2
-            bOk = bOk And CurrLogEvent.EventType = MachLogTypes.MACHGROUP_STATUS
-      End Select
-      If CurrLogEvent.EventType = MachLogTypes.PART_STATUS OrElse CurrLogEvent.EventType = MachLogTypes.MACHGROUP_STATUS Then
-         Select Case m_SelPartEventType
-            Case 0
-               bOk = bOk And True
-            Case 1
-               bOk = bOk And CurrLogEvent.nStatus = 1
-            Case 2
-               bOk = bOk And CurrLogEvent.nStatus = 2
-         End Select
-      End If
       ' se livello utente inferiore a 5, mostro solo eventi pezzo e machgroup
       If Map.refMainWindowVM.MainWindowM.nUserLevel < 5 Then
-         bOk = bOk And CurrLogEvent.EventType = MachLogTypes.PART_STATUS OrElse CurrLogEvent.EventType = MachLogTypes.MACHGROUP_STATUS
-      Else
-         If Not CurrLogEvent.EventType = MachLogTypes.PART_STATUS AndAlso Not CurrLogEvent.EventType = MachLogTypes.MACHGROUP_STATUS Then
-            bOk = True
+         If CurrLogEvent.EventType <> LogEvent.MachLogTypes.PART_STATUS AndAlso CurrLogEvent.EventType <> LogEvent.MachLogTypes.MACHGROUP_STATUS Then
+            Return False
          End If
       End If
+      Select Case m_SelEntityType
+         Case 0   ' ""
+            bOk = bOk And True
+         Case 1   ' "Pezzo"
+            bOk = bOk And CurrLogEvent.EventType = LogEvent.MachLogTypes.PART_STATUS
+         Case 2   ' "Barra"
+            bOk = bOk And CurrLogEvent.EventType = LogEvent.MachLogTypes.MACHGROUP_STATUS
+      End Select
+      If CurrLogEvent.EventType = LogEvent.MachLogTypes.PART_STATUS OrElse CurrLogEvent.EventType = LogEvent.MachLogTypes.MACHGROUP_STATUS Then
+         Select Case m_SelPartEventType
+            Case 0   ' ""
+               bOk = bOk And True
+            Case 1   ' "Inizio"
+               bOk = bOk And CurrLogEvent.nStatus = 1
+            Case 2   ' "Fine"
+               bOk = bOk And CurrLogEvent.nStatus = 2
+         End Select
+      End If
       Return bOk
    End Function
 
@@ -217,7 +340,15 @@ Public Class MachineLogPageVM
    End Sub
 
    Friend Sub UpdateMachineLogList()
-      m_MachineLogList = New ObservableCollection(Of LogEvent)(DbControllers.m_LogMachineController.GetCoreDesc(DateTime.Now - TimeSpan.FromDays(300), DateTime.Now).Select(Of LogEvent)(Function(x) New LogEvent(x)).ToList())
+      'm_MachineLogList = New ObservableCollection(Of LogEvent)(DbControllers.m_LogMachineController.GetCoreDesc(DateTime.Now - TimeSpan.FromDays(300), DateTime.Now).Select(Of LogEvent)(Function(x) New LogEvent(x)).ToList())
+      Select Case m_SelDayType
+         Case DayTypes.TODAY
+            m_MachineLogList = New ObservableCollection(Of LogEvent)(DbControllers.m_LogMachineController.GetCoreDesc(DateTime.Today, DateTime.Today + TimeSpan.FromDays(1)).Select(Of LogEvent)(Function(x) New LogEvent(x)).ToList())
+         Case DayTypes.YESTERDAY
+            m_MachineLogList = New ObservableCollection(Of LogEvent)(DbControllers.m_LogMachineController.GetCoreDesc(DateTime.Today - TimeSpan.FromDays(1), DateTime.Today).Select(Of LogEvent)(Function(x) New LogEvent(x)).ToList())
+         Case DayTypes.PERIOD
+            m_MachineLogList = New ObservableCollection(Of LogEvent)(DbControllers.m_LogMachineController.GetCoreDesc(m_dtStartDate, m_dtEndDate + TimeSpan.FromDays(1)).Select(Of LogEvent)(Function(x) New LogEvent(x)).ToList())
+      End Select
       NotifyPropertyChanged(NameOf(MachineLogList))
       m_MachineLogList_View = CollectionViewSource.GetDefaultView(m_MachineLogList)
       m_MachineLogList_View.Filter = AddressOf MachineLogFilter

EgtBEAMWALL.Supervisor/MainMenu/MainMenuVM.vb

@@ -277,31 +277,31 @@ Public Class MainMenuVM
 
    Private Function InitINPUTS() As Boolean
       ' fermo e riavvio lettura variabili per includere quelle della pagina input
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
       Map.refMainWindowVM.NotifyPropertyChanged(NameOf(Map.refMainWindowVM.nSelTabPage))
       Return True
    End Function
 
    Private Function ExitINPUTS() As Boolean
       ' fermo e riavvio lettura variabili per includere quelle della pagina input
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
       Return True
    End Function
 
    Private Function InitOUTPUTS() As Boolean
       ' fermo e riavvio lettura variabili per includere quelle della pagina input
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
       Map.refMainWindowVM.NotifyPropertyChanged(NameOf(Map.refMainWindowVM.nSelTabPage))
       Return True
    End Function
 
    Private Function ExitOUTPUTS() As Boolean
       ' fermo e riavvio lettura variabili per includere quelle della pagina input
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.STOPREAD_NUMFLEXIUM))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.READ_NUMFLEXIUM))
       Return True
    End Function
 

EgtBEAMWALL.Supervisor/MainWindow/MainWindowM.vb

@@ -239,9 +239,17 @@ Public Class MainWindowM
       EgtSetNestKey(sNestKey)
       ' Verifico abilitazione nesting automatico
       m_bAutoNestOption = Not String.IsNullOrWhiteSpace(sNestKey)
+      ' Impostazioni per chiave di rete
+      Dim bNetKey As Boolean = ( GetMainPrivateProfileInt( S_GENERAL, K_NETKEY, 0) = 1)
+      EgtSetNetHwKey( bNetKey)
+      Dim sLockId As String = ""
+      EgtUILib.GetPrivateProfileString( S_LICENCE, K_LOCKID, "", sLockId, sLicFile)
+      If Not String.IsNullOrEmpty( sLockId) Then
+         EgtSetLockId( sLockId)
+      End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2411, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5327, 2411, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2506, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(5327, 2506, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & SUPGENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

EgtBEAMWALL.Supervisor/MainWindow/MainWindowVM.vb

@@ -234,7 +234,7 @@ Public Class MainWindowVM
          Return
       End If
       ' disconnetto comunicazione con macchina
-      MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.DISCONNECT))
+      MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.DISCONNECT))
       ' termino thread di comunicazione con Db ed altri programmi
       ViewerOptimizerCommThread.StopThread()
       ' Verifico modifica parametri in Configurazione e chiedo il salvataggio

EgtBEAMWALL.Supervisor/My Project/AssemblyInfo.vb

@@ -30,7 +30,7 @@ Imports System.Windows
 #End if
 <Assembly: AssemblyCompany("Egalware s.r.l.")>
 <Assembly: AssemblyProduct("EgtBEAMWALL.Supervisor")>
-<Assembly: AssemblyCopyright("Copyright ©  2020-2022 by Egalware s.r.l.")>
+<Assembly: AssemblyCopyright("Copyright ©  2020-2023 by Egalware s.r.l.")>
 <Assembly: AssemblyTrademark("")>
 <Assembly: ComVisible(false)>
 
@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.4.11.3")>
-<Assembly: AssemblyFileVersion("2.4.11.3")>
+<Assembly: AssemblyVersion("2.5.6.2")>
+<Assembly: AssemblyFileVersion("2.5.6.2")>

EgtBEAMWALL.Supervisor/OpenProjectFileDialog/OpenProjectFileDialogVM.vb

@@ -12,19 +12,12 @@ Public Class OpenProjectFileDialogVM
    Public Overrides Function Init(ProjectType As ProjectType, Optional CurrProjectList As List(Of ProjectFileVM) = Nothing, Optional GoToProd As Boolean = False) As Boolean?
       m_ProjectType = ProjectType
       ' carico colonne
-      LoadColumns(ProjectType)
-      NotifyPropertyChanged(NameOf(SearchColumnList))
-      m_SelSearchColumn = m_SearchColumnList(0)
+      LoadColumns(m_ProjectType)
+      NotifyPropertyChanged(NameOf(FilterTypeList))
+      m_SelFilterType = m_FilterTypeList(0)
       ' carico lista progetti
       If IsNothing(CurrProjectList) OrElse CurrProjectList.Count = 0 Then
-         ' leggo da db
-         If ProjectType = ProjectType.PROD Then
-            Dim DbProjectList As New List(Of ProdFileM)
-            DbProjectList = DbControllers.m_ProdController.GetLastDesc(50)
-            For Each Project In DbProjectList
-               m_ProjectList.Add(New ProdFileVM(Project))
-            Next
-         End If
+         RefreshProjectList(GoToProd)
       Else
          m_ProjectList = New ObservableCollection(Of ProjectFileVM)(CurrProjectList)
          NotifyPropertyChanged(NameOf(ProjectList))
@@ -33,6 +26,45 @@ Public Class OpenProjectFileDialogVM
       m_ProjectList_View.Filter = AddressOf ProjectFilter
    End Function
 
+   Public Overrides Sub RefreshProjectList(Optional GoToProd As Boolean = False)
+      m_ProjectList.Clear()
+      ' calcolo periodo e righe
+      Dim dtStart As DateTime
+      Dim dtEnd As DateTime
+      Dim nRowQuantity As Integer = 20
+      Select Case SelRowQuantity
+         Case RowQuantities.FIFTY
+            nRowQuantity = 50
+         Case RowQuantities.HUNDRED
+            nRowQuantity = 100
+         Case RowQuantities.HUNDREDANDFIFTY
+            nRowQuantity = 150
+      End Select
+      Select Case m_SelDayType
+         Case DayTypes.LASTMONTH
+            dtEnd = DateTime.Today + TimeSpan.FromDays(1)
+            dtStart = dtEnd - TimeSpan.FromDays(31)
+         Case DayTypes.LAST3MONTHS
+            dtEnd = DateTime.Today + TimeSpan.FromDays(1)
+            dtStart = dtEnd - TimeSpan.FromDays(31 * 3)
+         Case DayTypes.LAST6MONTHS
+            dtEnd = DateTime.Today + TimeSpan.FromDays(1)
+            dtStart = dtEnd - TimeSpan.FromDays(31 * 6)
+         Case DayTypes.PERIOD
+            dtStart = dtStartDate + TimeSpan.FromDays(1)
+            dtEnd = dtEndDate
+      End Select
+      ' leggo da db
+      If m_ProjectType = ProjectType.PROD Then
+         Dim DbProjectList As New List(Of ProdFileM)
+         DbProjectList = DbControllers.m_ProdController.GetLastDesc(dtStart, dtEnd, nRowQuantity, True)
+         For Each Project In DbProjectList
+            m_ProjectList.Add(New ProdFileVM(Project))
+         Next
+      End If
+
+   End Sub
+
 #End Region    ' METHODS
 
 End Class

EgtBEAMWALL.Supervisor/SceneHost/MySceneHostVM.vb

@@ -178,13 +178,14 @@ Public Class MySceneHostVM
 
 #Region "ProjectManager"
 
-   Public Overrides Sub NewProject()
+   Public Overrides Function NewProject() As Boolean
       EgtSetCurrentContext(MainScene.GetCtx())
       Dim bOk As Boolean = MainController.NewProject()
       MainScene.SetStatusNull()
-   End Sub
+      Return bOk
+   End Function
 
-   Public Overrides Sub OpenProject(sFilePath As String)
+   Public Overrides Function OpenProject(sFilePath As String) As Boolean
       EgtSetCurrentContext(MainScene.GetCtx())
       Dim bOk As Boolean = False
       If String.IsNullOrEmpty(sFilePath) Then
@@ -201,29 +202,32 @@ Public Class MySceneHostVM
          bOk = MainController.OpenProject(sFilePath, False)
       End If
       MainScene.SetStatusNull()
-   End Sub
+      Return bOk
+   End Function
 
-   Public Overrides Sub SaveProject()
-      MyBase.SaveProject()
+   Public Overrides Function SaveProject() As Boolean
+      Dim bOk As Boolean = MyBase.SaveProject()
       ' Imposto stato gestione mouse diretto della scena a nessuno
       MainScene.SetStatusNull()
-   End Sub
+      Return bOk
+   End Function
 
-   Public Overrides Sub SaveAsProject()
-      MyBase.SaveAsProject()
+   Public Overrides Function SaveAsProject() As Boolean
+      Dim bOk As Boolean = MyBase.SaveAsProject()
       ' Imposto stato gestione mouse diretto della scena a nessuno
       MainScene.SetStatusNull()
-   End Sub
+      Return bOk
+   End Function
 
-   Public Overrides Sub ImportProject()
+   Public Overrides Function ImportProject() As Boolean
       Dim sDir As String = String.Empty
       GetMainPrivateProfileString(S_MRUIMPORT, K_FILE & "1", "", sDir)
       If Not String.IsNullOrWhiteSpace(sDir) Then
          sDir = Path.GetDirectoryName(sDir)
       End If
       sDir.TrimEnd("\"c)
-      MainController.ImportProject(sDir)
-   End Sub
+      Return MainController.ImportProject(sDir)
+   End Function
 
 #End Region    ' ProjectManager
 

EgtBEAMWALL.Supervisor/Utility/Dictionary.xaml

@@ -342,6 +342,16 @@
       <Setter Property="VerticalAlignment" Value="Center"/>
       <Setter Property="Margin" Value="10,0,10,0"/>
    </Style>
+   
+   <Style x:Key="Log_TextBlock" TargetType="{x:Type TextBlock}" BasedOn="{StaticResource {x:Type TextBlock}}">
+      <Setter Property="VerticalAlignment" Value="Center"/>
+      <Setter Property="Margin" Value="5,0,5,0"/>
+   </Style>
+
+   <Style x:Key="Filter_TextBlock" TargetType="{x:Type TextBlock}" BasedOn="{StaticResource {x:Type TextBlock}}">
+      <Setter Property="VerticalAlignment" Value="Center"/>
+      <Setter Property="Margin" Value="2.5,0,2.5,0"/>
+   </Style>
 
    <!-- ______________________________________________________________________________________________________________________________________________ -->
 
@@ -720,4 +730,22 @@
 
    <!-- ______________________________________________________________________________________________________________________________________________ -->
 
+
+   <!-- DatePicker -->
+
+   <Style x:Key="Log_DatePicker" TargetType="{x:Type DatePicker}">
+      <Setter Property="Height" Value="22" />
+   </Style>
+
+   <!-- ______________________________________________________________________________________________________________________________________________ -->
+  
+   <!-- DatePicker -->
+
+   <Style x:Key="Filter_DatePicker" TargetType="{x:Type DatePicker}">
+      <Setter Property="Height" Value="22" />
+      <Setter Property="Width" Value="100" />
+   </Style>
+
+   <!-- ______________________________________________________________________________________________________________________________________________ -->
+
 </ResourceDictionary>

EgtBEAMWALL.Supervisor/Utility/LogEvent.vb

@@ -1,4 +1,5 @@
-Imports EgtWPFLib5
+Imports EgtUILib
+Imports EgtWPFLib5
 Imports EgtBEAMWALL.Core
 
 Public Class LogEvent
@@ -77,9 +78,9 @@ Public Class LogEvent
       Get
          Select Case m_Status
             Case 1
-               Return "Inizio"
+               Return EgtMsg(62527)
             Case 2
-               Return "Fine"
+               Return EgtMsg(62528)
             Case Else
                Return ""
          End Select
@@ -147,12 +148,27 @@ Public Class LogEvent
          Select Case m_EventType
             Case MachLogTypes.PART_STATUS
                m_ProdId = sValues(0)
-               m_MachGroupId = DbControllers.m_MachGroupController.FindByMachGroupId(m_ProdId, sValues(1)).Name
-               m_PartId = DbControllers.m_PartController.FindByPartId(m_ProdId, sValues(2)).PDN
+               Dim MachGroup As DataLayer.DatabaseModels.MachGroupModel = DbControllers.m_MachGroupController.FindByMachGroupId(m_ProdId, sValues(1))
+               If Not IsNothing(MachGroup) Then
+                  m_MachGroupId = MachGroup.Name
+               Else
+                  m_MachGroupId = -1
+               End If
+               Dim Part As DataLayer.DatabaseModels.PartModel = DbControllers.m_PartController.FindByPartId(m_ProdId, sValues(2))
+               If Not IsNothing(Part) Then
+                  m_PartId = Part.PDN
+               Else
+                  m_PartId = -1
+               End If
                m_Status = sValues(3)
             Case MachLogTypes.MACHGROUP_STATUS
                m_ProdId = sValues(0)
-               m_MachGroupId = DbControllers.m_MachGroupController.FindByMachGroupId(m_ProdId, sValues(1)).Name
+               Dim MachGroup As DataLayer.DatabaseModels.MachGroupModel = DbControllers.m_MachGroupController.FindByMachGroupId(m_ProdId, sValues(1))
+               If Not IsNothing(MachGroup) Then
+                  m_MachGroupId = MachGroup.Name
+               Else
+                  m_MachGroupId = -1
+               End If
                m_Status = sValues(2)
             Case MachLogTypes.MACHINE_COMMAND
 

EgtBEAMWALL.Supervisor/VariablesList/VariablesListVM.vb

@@ -64,7 +64,7 @@ Public Class Variable
          Return CommVar.sValue
       End Get
       Set(value As String)
-         MachManaging.CommandList.Add(ThreadCommand.CreateCommand(CommandTypes.WRITE, {CommVar.nType}, Nothing, {CommVar.sAddress, value}))
+         MachManaging.AddToCommandList(ThreadCommand.CreateCommand(CommandTypes.WRITE, {CommVar.nType}, Nothing, {CommVar.sAddress, value}))
          NotifyPropertyChanged(NameOf(sValue))
       End Set
    End Property

EgtBEAMWALL.Supervisor/app.config

@@ -1,52 +1,59 @@
 <?xml version="1.0" encoding="utf-8"?>
 <configuration>
-  <configSections>
-  <!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
-  <section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
-  </configSections>
-  <entityFramework>
-    <defaultConnectionFactory type="MySql.Data.Entity.MySqlConnectionFactory, MySql.Data.Entity.EF6" />
-    <providers>
-      
-      <provider invariantName="System.Data.SqlClient" type="System.Data.Entity.SqlServer.SqlProviderServices, EntityFramework.SqlServer" />
-    <provider invariantName="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlProviderServices, MySql.Data.EntityFramework, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d">
-      </provider></providers>
-  </entityFramework>
-  <connectionStrings>
-    <add name="DefaultConnection" connectionString="server=localhost;port=3306;User Id=root;password=viacremasca;Persist Security Info=True;database=EgtBwDb;SslMode=none" providerName="MySql.Data.MySqlClient" />
-  </connectionStrings>
-  <runtime>
-    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
-      <dependentAssembly>
-        <assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-8.0.21.0" newVersion="8.0.21.0" />
-      </dependentAssembly>
-      <dependentAssembly>
-        <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-13.0.0.0" newVersion="13.0.0.0" />
-      </dependentAssembly>
-      <dependentAssembly>
-        <assemblyIdentity name="System.Runtime.CompilerServices.Unsafe" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-5.0.0.0" newVersion="5.0.0.0" />
-      </dependentAssembly>
-      <dependentAssembly>
-        <assemblyIdentity name="BouncyCastle.Crypto" publicKeyToken="0e99375e54769942" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-1.8.5.0" newVersion="1.8.5.0" />
-      </dependentAssembly>
-      <dependentAssembly>
-        <assemblyIdentity name="Google.Protobuf" publicKeyToken="a7d26565bac4d604" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-3.19.4.0" newVersion="3.19.4.0" />
-      </dependentAssembly>
-      <dependentAssembly>
-        <assemblyIdentity name="K4os.Compression.LZ4.Streams" publicKeyToken="2186fa9121ef231d" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-1.2.6.0" newVersion="1.2.6.0" />
-      </dependentAssembly>
-    </assemblyBinding>
-  </runtime>
-  <system.data>
-    <DbProviderFactories>
-      <remove invariant="MySql.Data.MySqlClient" />
-      <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
-    </DbProviderFactories>
-  </system.data>
-<startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2" /></startup></configuration>
+   <configSections>
+      <!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
+      <section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
+   </configSections>
+   <entityFramework>
+      <!--<defaultConnectionFactory type="MySql.Data.Entity.MySqlConnectionFactory, MySql.Data.EntityFramework" />-->
+      <defaultConnectionFactory type="System.Data.Entity.Infrastructure.SqlConnectionFactory, EntityFramework" />
+      <providers>
+         <provider invariantName="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlProviderServices, MySql.Data.EntityFramework, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d">
+         </provider>
+      </providers>
+   </entityFramework>
+   <connectionStrings>
+      <add name="DefaultConnection" connectionString="server=localhost;port=3306;User Id=root;password=viacremasca;Persist Security Info=True;database=EgtBwDb;SslMode=none" providerName="MySql.Data.MySqlClient" />
+   </connectionStrings>
+   <runtime>
+      <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
+         <dependentAssembly>
+            <assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-8.0.21.0" newVersion="8.0.21.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="Newtonsoft.Json" publicKeyToken="30ad4fe6b2a6aeed" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-13.0.0.0" newVersion="13.0.0.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="System.Runtime.CompilerServices.Unsafe" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-6.0.0.0" newVersion="6.0.0.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="BouncyCastle.Crypto" publicKeyToken="0e99375e54769942" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-1.9.0.0" newVersion="1.9.0.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="Google.Protobuf" publicKeyToken="a7d26565bac4d604" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-3.21.9.0" newVersion="3.21.9.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="K4os.Compression.LZ4.Streams" publicKeyToken="2186fa9121ef231d" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-1.3.5.0" newVersion="1.3.5.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="System.Memory" publicKeyToken="cc7b13ffcd2ddd51" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-4.0.1.2" newVersion="4.0.1.2" />
+         </dependentAssembly>
+      </assemblyBinding>
+   </runtime>
+   <system.data>
+      <DbProviderFactories>
+         <remove invariant="MySql.Data.MySqlClient" />
+         <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
+      </DbProviderFactories>
+   </system.data>
+   <startup>
+      <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2" />
+   </startup>
+</configuration>

EgtBEAMWALL.Supervisor/packages.config

@@ -2,13 +2,13 @@
 <packages>
   <package id="BouncyCastle" version="1.8.5" targetFramework="net472" />
   <package id="Csv" version="1.0.31" targetFramework="net472" />
+  <package id="DotNetZip" version="1.16.0" targetFramework="net472" />
   <package id="EntityFramework" version="6.4.4" targetFramework="net452" />
   <package id="FluentFTP" version="19.2.2" targetFramework="net472" />
-  <package id="Google.Protobuf" version="3.19.4" targetFramework="net472" />
-  <package id="Ionic.Zip" version="1.9.1.8" targetFramework="net472" />
-  <package id="K4os.Compression.LZ4" version="1.2.6" targetFramework="net472" />
-  <package id="K4os.Compression.LZ4.Streams" version="1.2.6" targetFramework="net472" />
-  <package id="K4os.Hash.xxHash" version="1.0.6" targetFramework="net472" />
+  <package id="Google.Protobuf" version="3.21.9" targetFramework="net472" />
+  <package id="K4os.Compression.LZ4" version="1.3.5" targetFramework="net472" />
+  <package id="K4os.Compression.LZ4.Streams" version="1.3.5" targetFramework="net472" />
+  <package id="K4os.Hash.xxHash" version="1.0.8" targetFramework="net472" />
   <package id="Lextm.SharpSnmpLib" version="10.0.9" targetFramework="net472" />
   <package id="Microsoft.DotNet.PlatformAbstractions" version="2.1.0" targetFramework="net472" />
   <package id="Microsoft.Extensions.DependencyModel" version="2.1.0" targetFramework="net472" />
@@ -16,16 +16,18 @@
   <package id="MySql.Data.EntityFramework" version="8.0.21" targetFramework="net472" />
   <package id="Newtonsoft.Json" version="13.0.1" targetFramework="net472" />
   <package id="NLog" version="5.0.1" targetFramework="net472" />
-  <package id="Portable.BouncyCastle" version="1.8.2" targetFramework="net472" />
+  <package id="Portable.BouncyCastle" version="1.9.0" targetFramework="net472" />
   <package id="SSH.NET" version="2016.1.0" targetFramework="net472" />
   <package id="System.Buffers" version="4.5.1" targetFramework="net472" />
   <package id="System.Collections.Specialized" version="4.3.0" targetFramework="net472" />
-  <package id="System.Memory" version="4.5.4" targetFramework="net472" />
+  <package id="System.IO.Pipelines" version="5.0.2" targetFramework="net472" />
+  <package id="System.Memory" version="4.5.5" targetFramework="net472" />
   <package id="System.Net.NameResolution" version="4.3.0" targetFramework="net472" />
   <package id="System.Net.Sockets" version="4.3.0" targetFramework="net472" />
   <package id="System.Numerics.Vectors" version="4.5.0" targetFramework="net472" />
-  <package id="System.Runtime.CompilerServices.Unsafe" version="5.0.0" targetFramework="net472" />
+  <package id="System.Runtime.CompilerServices.Unsafe" version="6.0.0" targetFramework="net472" />
   <package id="System.Runtime.InteropServices.RuntimeInformation" version="4.0.0" targetFramework="net472" />
+  <package id="System.Threading.Tasks.Extensions" version="4.5.4" targetFramework="net472" />
   <package id="System.Xml.XmlDocument" version="4.3.0" targetFramework="net472" />
   <package id="Zebra.Printer.SDK" version="2.15.2634" targetFramework="net472" />
 </packages>

EgtBEAMWALL.ViewerOptimizer/AddPartWnd/AddPartWndVM.vb

@@ -40,7 +40,7 @@ Public Class AddPartWndVM
       End Get
       Set(value As String)
          Dim dTempL As Double
-         If StringToLen(value, dTempL) AndAlso dTempL > 0 Then
+         If StringToLenAdv(value, dTempL, True) AndAlso dTempL > 0 Then
             m_dL = dTempL
          Else
             NotifyPropertyChanged("sL")
@@ -60,7 +60,7 @@ Public Class AddPartWndVM
       End Get
       Set(value As String)
          Dim dTempW As Double
-         If StringToLen(value, dTempW) AndAlso dTempW > 0 Then
+         If StringToLenAdv(value, dTempW, True) AndAlso dTempW > 0 Then
             EgtDraw()
             m_dW = dTempW
          Else
@@ -81,7 +81,7 @@ Public Class AddPartWndVM
       End Get
       Set(value As String)
          Dim dTempH As Double
-         If StringToLen(value, dTempH) AndAlso dTempH > 0 Then
+         If StringToLenAdv(value, dTempH, True) AndAlso dTempH > 0 Then
             EgtDraw()
             m_dH = dTempH
          Else

EgtBEAMWALL.ViewerOptimizer/AddRawPartWnd/AddRawPartWndVM.vb

@@ -102,7 +102,17 @@ Public Class AddRawPartWndVM
       End Select
       m_DimensionsList = DimensionsList
       If m_DimensionsList.Count > 0 Then
-         SelDimension = m_DimensionsList(0)
+         Dim LastMaterial As SParam = WarehouseHelper.GetLastMaterial(DimensionsList(0).SectXMat)
+         If IsNothing(LastMaterial) Then
+            SelDimension = m_DimensionsList(0)
+         Else
+            Dim TempDimension As SParam = m_DimensionsList.FirstOrDefault(Function(x) x.SectXMat = LastMaterial.SectXMat AndAlso x.dL = LastMaterial.dL AndAlso x.dW = LastMaterial.dW AndAlso x.nQuantity = LastMaterial.nQuantity)
+            If Not IsNothing(TempDimension) Then
+               SelDimension = TempDimension
+            Else
+               SelDimension = m_DimensionsList(0)
+            End If
+         End If
       End If
       ' riduco lista parametri a solo quelli che utilizzati
       m_VariableList_View = CollectionViewSource.GetDefaultView(m_VariableList)
@@ -222,14 +232,14 @@ Public Class Variable
                m_sValue = value
             Case VariableType.LENGTH
                Dim dTempValue As Double
-               If StringToLen(value, dTempValue) Then
+               If StringToLenAdv(value, dTempValue, True) Then
                   m_dValue = dTempValue
                Else
                   NotifyPropertyChanged("sValue")
                End If
             Case Else         ' VariableType.DOUBLE_
                Dim dTempValue As Double
-               If StringToDouble(value, dTempValue) Then
+               If StringToDoubleAdv(value, dTempValue, True) Then
                   m_dValue = dTempValue
                Else
                   NotifyPropertyChanged("sValue")

EgtBEAMWALL.ViewerOptimizer/App.config

@@ -1,47 +1,63 @@
 <?xml version="1.0" encoding="utf-8"?>
 <configuration>
-  <configSections>
-  <!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
-  <section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
-  </configSections>
-  <entityFramework>
-    <defaultConnectionFactory type="MySql.Data.Entity.MySqlConnectionFactory, MySql.Data.Entity.EF6" />
-    <providers>
-      <provider invariantName="System.Data.SqlClient" type="System.Data.Entity.SqlServer.SqlProviderServices, EntityFramework.SqlServer" />
-      <provider invariantName="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlProviderServices, MySql.Data.EntityFramework, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
-    </providers>
-  </entityFramework>
-  <connectionStrings>
-    <add name="DefaultConnection" connectionString="server=localhost;port=3306;User Id=EgtUser;password=viacremasca;Persist Security Info=True;database=EgtBwDb;SslMode=none" providerName="MySql.Data.MySqlClient" />
-  </connectionStrings>
-  <runtime>
-    <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
-      <dependentAssembly>
-        <assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-8.0.21.0" newVersion="8.0.21.0" />
-      </dependentAssembly>
-      <dependentAssembly>
-        <assemblyIdentity name="System.Runtime.CompilerServices.Unsafe" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-5.0.0.0" newVersion="5.0.0.0" />
-      </dependentAssembly>
-      <dependentAssembly>
-        <assemblyIdentity name="Google.Protobuf" publicKeyToken="a7d26565bac4d604" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-3.19.4.0" newVersion="3.19.4.0" />
-      </dependentAssembly>
-      <dependentAssembly>
-        <assemblyIdentity name="K4os.Compression.LZ4.Streams" publicKeyToken="2186fa9121ef231d" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-1.2.6.0" newVersion="1.2.6.0" />
-      </dependentAssembly>
-      <dependentAssembly>
-        <assemblyIdentity name="BouncyCastle.Crypto" publicKeyToken="0e99375e54769942" culture="neutral" />
-        <bindingRedirect oldVersion="0.0.0.0-1.8.5.0" newVersion="1.8.5.0" />
-      </dependentAssembly>
-    </assemblyBinding>
-  </runtime>
-  <system.data>
-    <DbProviderFactories>
-      <remove invariant="MySql.Data.MySqlClient" />
-      <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
-    </DbProviderFactories>
-  </system.data>
-<startup><supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2" /></startup></configuration>
+   <configSections>
+      <!-- For more information on Entity Framework configuration, visit http://go.microsoft.com/fwlink/?LinkID=237468 -->
+      <section name="entityFramework" type="System.Data.Entity.Internal.ConfigFile.EntityFrameworkSection, EntityFramework, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" requirePermission="false" />
+   </configSections>
+   <entityFramework>
+      <!--<defaultConnectionFactory type="MySql.Data.Entity.MySqlConnectionFactory, MySql.Data.EntityFramework" />-->
+      <defaultConnectionFactory type="System.Data.Entity.Infrastructure.SqlConnectionFactory, EntityFramework" />
+      <providers>
+         <provider invariantName="MySql.Data.MySqlClient" type="MySql.Data.MySqlClient.MySqlProviderServices, MySql.Data.EntityFramework, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d">
+         </provider>
+      </providers>
+   </entityFramework>
+   <connectionStrings>
+      <add name="DefaultConnection" connectionString="server=localhost;port=3306;User Id=EgtUser;password=viacremasca;Persist Security Info=True;database=EgtBwDb;SslMode=none" providerName="MySql.Data.MySqlClient" />
+   </connectionStrings>
+   <runtime>
+      <assemblyBinding xmlns="urn:schemas-microsoft-com:asm.v1">
+         <dependentAssembly>
+            <assemblyIdentity name="MySql.Data" publicKeyToken="c5687fc88969c44d" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-8.0.21.0" newVersion="8.0.21.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="System.Runtime.CompilerServices.Unsafe" publicKeyToken="b03f5f7f11d50a3a" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-6.0.0.0" newVersion="6.0.0.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="Google.Protobuf" publicKeyToken="a7d26565bac4d604" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-3.21.9.0" newVersion="3.21.9.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="K4os.Compression.LZ4.Streams" publicKeyToken="2186fa9121ef231d" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-1.3.5.0" newVersion="1.3.5.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="BouncyCastle.Crypto" publicKeyToken="0e99375e54769942" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-1.9.0.0" newVersion="1.9.0.0" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="System.Memory" publicKeyToken="cc7b13ffcd2ddd51" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-4.0.1.2" newVersion="4.0.1.2" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="System.Threading.Tasks.Extensions" publicKeyToken="cc7b13ffcd2ddd51" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-4.2.0.1" newVersion="4.2.0.1" />
+         </dependentAssembly>
+         <dependentAssembly>
+            <assemblyIdentity name="System.Buffers" publicKeyToken="cc7b13ffcd2ddd51" culture="neutral" />
+            <bindingRedirect oldVersion="0.0.0.0-4.0.3.0" newVersion="4.0.3.0" />
+         </dependentAssembly>
+      </assemblyBinding>
+   </runtime>
+   <system.data>
+      <DbProviderFactories>
+         <remove invariant="MySql.Data.MySqlClient" />
+         <add name="MySQL Data Provider" invariant="MySql.Data.MySqlClient" description=".Net Framework Data Provider for MySQL" type="MySql.Data.MySqlClient.MySqlClientFactory, MySql.Data, Version=8.0.21.0, Culture=neutral, PublicKeyToken=c5687fc88969c44d" />
+      </DbProviderFactories>
+   </system.data>
+   <startup>
+      <supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.7.2" />
+   </startup>
+</configuration>

EgtBEAMWALL.ViewerOptimizer/BTLViewModel/BTLFeatureVM.vb

@@ -25,7 +25,7 @@ Public Class BTLFeatureVM
          If value <> -1 Then
             ' verifico se solido attivo
             Dim bShowSolid As Boolean = Map.refShowBeamPanelVM.ShowSolid_IsChecked
-            If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(False)
+            If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, False, False)
             ' aggiorno la feature con nuovo valore
             Dim vPar() As Double = Nothing
             Dim sPar As String = String.Empty
@@ -41,8 +41,8 @@ Public Class BTLFeatureVM
                ResetCalcFeature()
             End If
             NotifyPropertyChanged(NameOf(nSelGRP))
+            If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, True, False)
             EgtDraw()
-            If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(False)
          End If
       End Set
    End Property
@@ -65,7 +65,7 @@ Public Class BTLFeatureVM
          If value <> -1 Then
             ' verifico se solido attivo
             Dim bShowSolid As Boolean = Map.refShowBeamPanelVM.ShowSolid_IsChecked
-            If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(False)
+            If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, False, False)
             ' se freecontour
             If Me.m_BTLFeatureM.IsFreeContour() Then
                ' cambio faccia alla geometria
@@ -108,12 +108,33 @@ Public Class BTLFeatureVM
                ResetCalcFeature()
             End If
             NotifyPropertyChanged("nSelSIDE")
+            If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, True, False)
             EgtDraw()
-            If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(False)
          End If
       End Set
    End Property
 
+   Public Property sPriority As String
+      Get
+         Return m_BTLFeatureM.nPriority.ToString()
+      End Get
+      Set(value As String)
+         Dim nTemp As Integer = 0
+         If Integer.TryParse(value, nTemp) Then
+            If EgtSetInfo(nFeatureId, BTL_FTR_PRIORITY, nTemp) Then
+               m_BTLFeatureM.nPriority = nTemp
+               ' setto feature da ricalcolare
+               ResetCalcFeature()
+               ' se in View
+               If Map.refMainMenuVM.SelPage = Pages.VIEW Then
+                  ' imposto modificato per copie
+                  EgtDuploSetModified(m_BTLPartM.nPartId)
+               End If
+            End If
+         End If
+         NotifyPropertyChanged(NameOf(sPriority))
+      End Set
+   End Property
    ' proprieta' che indica se e' attivo l'update del parametro bDO su piu' feature (attiva/disattiva tutti su pezzo, o per tipo con tasto destro)
    ' necessario per evitare ricalcolo della grafica sulla modifica del parametro per ogni feature
    Private Shared m_bDO_MultipleUpdate As Boolean = False
@@ -135,7 +156,7 @@ Public Class BTLFeatureVM
          If value <> m_BTLFeatureM.bDO Then
             If Map.refMainMenuVM.SelPage = Pages.VIEW Then
                ' verifico se solido attivo
-               If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(False)
+               If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, False, False)
             End If
             If EgtBeamEnableProcess(nFeatureId, value, Not m_bDO_MultipleUpdate) Then
                m_BTLFeatureM.bDO = value
@@ -154,7 +175,7 @@ Public Class BTLFeatureVM
             End If
             If Map.refMainMenuVM.SelPage = Pages.VIEW Then
                ' eventualmente ripristino solido
-               If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(False)
+               If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, True, False)
             End If
             If Not m_bDO_MultipleUpdate Then EgtDraw()
             ' aggiorno stato abilitazione del bottone modifica free contour
@@ -372,6 +393,8 @@ Public Class BTLFeatureVM
          For Each QPar In QBTLParamVMList
             If QPar.bCustom Then EgtSetInfo(nNewFeatureId, QPar.sName & "A", 1)
          Next
+         ' Riporto priority
+         EgtSetInfo(nNewFeatureId, BTL_FTR_PRIORITY, m_BTLFeatureM.nPriority)
          Dim NewFeat As BTLFeatureM = BTLFeatureM.CreateBTLFeature(m_BTLPartM, nNewFeatureId)
          ' la aggiungo a struttura BTL pezzo di destinazione
          DestBTLPart.AddBTLFeature(NewFeat)

EgtBEAMWALL.ViewerOptimizer/BTLViewModel/BTLParamVM.vb

@@ -121,9 +121,9 @@ Public Class BTLParamVM
          ' trasformo valori
          Select Case m_BTLParamM.nType
             Case BTLParamType.DOUBLE_
-               StringToDouble(value, dNewValue)
+               StringToDoubleAdv(value, dNewValue, True)
             Case BTLParamType.LENGTH
-               StringToLen(value, dNewValue)
+               StringToLenAdv(value, dNewValue, True)
             Case Else
                ' per string non faccio nulla
          End Select
@@ -168,9 +168,9 @@ Public Class BTLParamVM
          ' trasformo valori
          Select Case m_BTLParamM.nType
             Case BTLParamType.DOUBLE_
-               StringToDouble(value, dNewValue)
+               StringToDoubleAdv(value, dNewValue, True)
             Case BTLParamType.LENGTH
-               StringToLen(value, dNewValue)
+               StringToLenAdv(value, dNewValue, True)
             Case Else
                ' per string non faccio nulla
          End Select
@@ -277,7 +277,7 @@ Public Class BTLParamVM
    Friend Sub UpdateParamValue(dNewValue As Double, sNewValue As String, Optional bDraw As Boolean = True)
       ' verifico se solido attivo
       Dim bShowSolid As Boolean = Map.refShowBeamPanelVM.ShowSolid_IsChecked
-      If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(False)
+      If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, False, False)
       ' Recupero i parametri attuali della feature
       Dim vPar() As Double = Nothing
       Dim sPar As String = String.Empty
@@ -335,7 +335,7 @@ Public Class BTLParamVM
          End If
       End If
 
-      If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(False)
+      If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, True, False)
       If bDraw Then EgtDraw()
 
    End Sub

EgtBEAMWALL.ViewerOptimizer/BTLViewModel/BTLPartVM.vb

@@ -118,7 +118,7 @@ Public Class BTLPartVM
 
       ' verifico se solido attivo
       Dim bShowSolid As Boolean = Map.refShowBeamPanelVM.ShowSolid_IsChecked
-      If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(False)
+      If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, False, False)
 
       If Not EgtBeamSetPartBox(dBtlL, dBtlH, dBtlW, False) Then Return False
 
@@ -134,7 +134,7 @@ Public Class BTLPartVM
       ' aggiorno sezioni
       Map.refProjectVM.BTLStructureVM.UpdateSection(Section, OldSection)
       ' eventualmente ripristino solido
-      If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(False)
+      If bShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, True, False)
       EgtDraw()
 
       Return True
@@ -156,7 +156,7 @@ Public Class BTLPartVM
    Public Property sL As String
       Get
          Dim nOrigGroupId As Integer = nPartId
-         If Map.refMainMenuVM.SelPage = Pages.VIEW AndAlso Map.refShowBeamPanelVM.ShowBuilding_IsChecked AndAlso Map.refShowBeamPanelVM.bShowAll Then
+         If Map.refMainMenuVM.SelPage = Pages.VIEW AndAlso EgtBeamGetBuildingIsOn() AndAlso Map.refShowBeamPanelVM.bShowAll Then
             nOrigGroupId = GetOrigFrameGroup(nPartId)
          End If
          Dim frBeam As New Frame3d
@@ -171,7 +171,7 @@ Public Class BTLPartVM
       End Get
       Set(value As String)
          Dim dVal As Double
-         If StringToLen(value, dVal) Then
+         If StringToLenAdv(value, dVal, True) Then
             Dim dBtlL = m_BTLPartM.dBtlL
             Dim dBtlW = m_BTLPartM.dBtlW
             Dim dBtlH = m_BTLPartM.dBtlH
@@ -214,7 +214,7 @@ Public Class BTLPartVM
    Public Property sW As String
       Get
          Dim nOrigGroupId As Integer = nPartId
-         If Map.refMainMenuVM.SelPage = Pages.VIEW AndAlso Map.refShowBeamPanelVM.ShowBuilding_IsChecked AndAlso Map.refShowBeamPanelVM.bShowAll Then
+         If Map.refMainMenuVM.SelPage = Pages.VIEW AndAlso EgtBeamGetBuildingIsOn() AndAlso Map.refShowBeamPanelVM.bShowAll Then
             nOrigGroupId = GetOrigFrameGroup(nPartId)
          End If
          Dim frBeam As New Frame3d
@@ -229,7 +229,7 @@ Public Class BTLPartVM
       End Get
       Set(value As String)
          Dim dVal As Double
-         If StringToLen(value, dVal) Then
+         If StringToLenAdv(value, dVal, True) Then
             Dim dBtlL = m_BTLPartM.dBtlL
             Dim dBtlW = m_BTLPartM.dBtlW
             Dim dBtlH = m_BTLPartM.dBtlH
@@ -272,7 +272,7 @@ Public Class BTLPartVM
    Public Property sH As String
       Get
          Dim nOrigGroupId As Integer = nPartId
-         If Map.refMainMenuVM.SelPage = Pages.VIEW AndAlso Map.refShowBeamPanelVM.ShowBuilding_IsChecked AndAlso Map.refShowBeamPanelVM.bShowAll Then
+         If Map.refMainMenuVM.SelPage = Pages.VIEW AndAlso EgtBeamGetBuildingIsOn() AndAlso Map.refShowBeamPanelVM.bShowAll Then
             nOrigGroupId = GetOrigFrameGroup(nPartId)
          End If
          Dim frBeam As New Frame3d
@@ -287,7 +287,7 @@ Public Class BTLPartVM
       End Get
       Set(value As String)
          Dim dVal As Double
-         If StringToLen(value, dVal) Then
+         If StringToLenAdv(value, dVal, True) Then
             Dim dBtlL = m_BTLPartM.dBtlL
             Dim dBtlW = m_BTLPartM.dBtlW
             Dim dBtlH = m_BTLPartM.dBtlH
@@ -550,7 +550,7 @@ Public Class BTLPartVM
       End Get
       Set(value As String)
          Dim dTempPlaningLen As Double
-         If StringToLen(value, dTempPlaningLen) AndAlso EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_PLANINGLENGTH, dTempPlaningLen) Then
+         If StringToLenAdv(value, dTempPlaningLen, True) AndAlso EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_PLANINGLENGTH, dTempPlaningLen) Then
             m_BTLPartM.dPLANINGLEN = dTempPlaningLen
          Else
             NotifyPropertyChanged("dPLANINGLEN")
@@ -564,7 +564,7 @@ Public Class BTLPartVM
       End Get
       Set(value As String)
          Dim dTempStartOffset As Double
-         If StringToLen(value, dTempStartOffset) AndAlso EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_STARTOFFSET, dTempStartOffset) Then
+         If StringToLenAdv(value, dTempStartOffset, True) AndAlso EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_STARTOFFSET, dTempStartOffset) Then
             m_BTLPartM.dSTARTOFFSET = dTempStartOffset
          Else
             NotifyPropertyChanged("dSTARTOFFSET")
@@ -578,7 +578,7 @@ Public Class BTLPartVM
       End Get
       Set(value As String)
          Dim dTempEndOffset As Double
-         If StringToLen(value, dTempEndOffset) AndAlso EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_ENDOFFSET, dTempEndOffset) Then
+         If StringToLenAdv(value, dTempEndOffset, True) AndAlso EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_ENDOFFSET, dTempEndOffset) Then
             m_BTLPartM.dENDOFFSET = dTempEndOffset
          Else
             NotifyPropertyChanged("dENDOFFSET")
@@ -625,9 +625,9 @@ Public Class BTLPartVM
          Dim sValArray() As String = value.Split(",")
          Dim ptOri As New Point3d
          If sValArray.Count() >= 3 AndAlso
-            StringToLen(sValArray(0), ptOri.x) AndAlso
-            StringToLen(sValArray(1), ptOri.y) AndAlso
-            StringToLen(sValArray(2), ptOri.z) AndAlso
+            StringToLenAdv(sValArray(0), ptOri.x, True) AndAlso
+            StringToLenAdv(sValArray(1), ptOri.y, True) AndAlso
+            StringToLenAdv(sValArray(2), ptOri.z, True) AndAlso
             m_BTLPartM.refTransf.ChangeOrigin(ptOri) Then
             EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_TRANSFORMATION & (SelUID + 1), LenToString(m_BTLPartM.refTransf.Orig.x, 3) & "," &
                                                                          LenToString(m_BTLPartM.refTransf.Orig.y, 3) & "," &
@@ -661,9 +661,9 @@ Public Class BTLPartVM
          Dim sValArray() As String = value.Split(",")
          Dim vtVersX As New Vector3d
          If sValArray.Count() >= 3 AndAlso
-            StringToDouble(sValArray(0), vtVersX.x) AndAlso
-            StringToDouble(sValArray(1), vtVersX.y) AndAlso
-            StringToDouble(sValArray(2), vtVersX.z) AndAlso
+            StringToDoubleAdv(sValArray(0), vtVersX.x, True) AndAlso
+            StringToDoubleAdv(sValArray(1), vtVersX.y, True) AndAlso
+            StringToDoubleAdv(sValArray(2), vtVersX.z, True) AndAlso
             m_BTLPartM.refTransf.Setup(ptOri, ptOri + vtVersX, ptOri + vtVersY) Then
             EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_TRANSFORMATION & (SelUID + 1), LenToString(m_BTLPartM.refTransf.Orig.x, 3) & "," &
                                                                          LenToString(m_BTLPartM.refTransf.Orig.y, 3) & "," &
@@ -699,9 +699,9 @@ Public Class BTLPartVM
          Dim sValArray() As String = value.Split(",")
          Dim vtVersY As New Vector3d
          If sValArray.Count() >= 3 AndAlso
-            StringToDouble(sValArray(0), vtVersY.x) AndAlso
-            StringToDouble(sValArray(1), vtVersY.y) AndAlso
-            StringToDouble(sValArray(2), vtVersY.z) AndAlso
+            StringToDoubleAdv(sValArray(0), vtVersY.x, True) AndAlso
+            StringToDoubleAdv(sValArray(1), vtVersY.y, True) AndAlso
+            StringToDoubleAdv(sValArray(2), vtVersY.z, True) AndAlso
             m_BTLPartM.refTransf.Setup(ptOri, ptOri + vtVersX, ptOri + vtVersY) Then
             EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_TRANSFORMATION & (SelUID + 1), LenToString(m_BTLPartM.refTransf.Orig.x, 3) & "," &
                                                                          LenToString(m_BTLPartM.refTransf.Orig.y, 3) & "," &
@@ -733,10 +733,10 @@ Public Class BTLPartVM
       Set(value As Integer)
          Dim sValArray() As String = CamberParams.Split(",")
          If sValArray.Count() >= 4 AndAlso
-            StringToLen(sValArray(0), m_BTLPartM.m_dCamberLen1) AndAlso
-            StringToLen(sValArray(1), m_BTLPartM.m_dCamberLen2) AndAlso
-            StringToLen(sValArray(2), m_BTLPartM.m_dCamberLen3) AndAlso
-            StringToLen(sValArray(3), m_BTLPartM.m_dCamberCross3) AndAlso
+            StringToLenAdv(sValArray(0), m_BTLPartM.m_dCamberLen1, True) AndAlso
+            StringToLenAdv(sValArray(1), m_BTLPartM.m_dCamberLen2, True) AndAlso
+            StringToLenAdv(sValArray(2), m_BTLPartM.m_dCamberLen3, True) AndAlso
+            StringToLenAdv(sValArray(3), m_BTLPartM.m_dCamberCross3, True) AndAlso
             EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_CAMBER, "SIDE: " & (value + 1) &
                                                   " P01: " & sValArray(0) &
                                                   " P02: " & sValArray(1) &
@@ -759,10 +759,10 @@ Public Class BTLPartVM
       Set(value As String)
          Dim sValArray() As String = value.Split(",")
          If sValArray.Count() >= 4 AndAlso
-            StringToLen(sValArray(0), m_BTLPartM.m_dCamberLen1) AndAlso
-            StringToLen(sValArray(1), m_BTLPartM.m_dCamberLen2) AndAlso
-            StringToLen(sValArray(2), m_BTLPartM.m_dCamberLen3) AndAlso
-            StringToLen(sValArray(3), m_BTLPartM.m_dCamberCross3) Then
+            StringToLenAdv(sValArray(0), m_BTLPartM.m_dCamberLen1, True) AndAlso
+            StringToLenAdv(sValArray(1), m_BTLPartM.m_dCamberLen2, True) AndAlso
+            StringToLenAdv(sValArray(2), m_BTLPartM.m_dCamberLen3, True) AndAlso
+            StringToLenAdv(sValArray(3), m_BTLPartM.m_dCamberCross3, True) Then
             EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_CAMBER, " SIDE: " & (SelCAMBERSIDE + 1) &
                                                   " P01: " & sValArray(0) &
                                                   " P02: " & sValArray(1) &
@@ -790,10 +790,10 @@ Public Class BTLPartVM
 
          Dim sValArray() As String = PartOffsetParams.Split(",")
          If sValArray.Count() >= 4 AndAlso
-            StringToLen(sValArray(0), m_BTLPartM.m_dPartOffsetSide1) AndAlso
-            StringToLen(sValArray(1), m_BTLPartM.m_dPartOffsetSide2) AndAlso
-            StringToLen(sValArray(2), m_BTLPartM.m_dPartOffsetSide3) AndAlso
-            StringToLen(sValArray(3), m_BTLPartM.m_dPartOffsetSide4) AndAlso
+            StringToLenAdv(sValArray(0), m_BTLPartM.m_dPartOffsetSide1, True) AndAlso
+            StringToLenAdv(sValArray(1), m_BTLPartM.m_dPartOffsetSide2, True) AndAlso
+            StringToLenAdv(sValArray(2), m_BTLPartM.m_dPartOffsetSide3, True) AndAlso
+            StringToLenAdv(sValArray(3), m_BTLPartM.m_dPartOffsetSide4, True) AndAlso
             EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_PARTOFFSET, " P04: " & sValue &
                                                       " P11: " & sValArray(0) &
                                                       " P12: " & sValArray(1) &
@@ -819,10 +819,10 @@ Public Class BTLPartVM
 
          Dim sValArray() As String = value.Split(",")
          If sValArray.Count() >= 4 AndAlso
-            StringToLen(sValArray(0), m_BTLPartM.m_dPartOffsetSide1) AndAlso
-            StringToLen(sValArray(1), m_BTLPartM.m_dPartOffsetSide2) AndAlso
-            StringToLen(sValArray(2), m_BTLPartM.m_dPartOffsetSide3) AndAlso
-            StringToLen(sValArray(3), m_BTLPartM.m_dPartOffsetSide4) Then
+            StringToLenAdv(sValArray(0), m_BTLPartM.m_dPartOffsetSide1, True) AndAlso
+            StringToLenAdv(sValArray(1), m_BTLPartM.m_dPartOffsetSide2, True) AndAlso
+            StringToLenAdv(sValArray(2), m_BTLPartM.m_dPartOffsetSide3, True) AndAlso
+            StringToLenAdv(sValArray(3), m_BTLPartM.m_dPartOffsetSide4, True) Then
             EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_PARTOFFSET, " P04: " & sValue &
                                                       " P11: " & sValArray(0) &
                                                       " P12: " & sValArray(1) &
@@ -973,9 +973,9 @@ Public Class BTLPartVM
          Dim sValArray() As String = value.Split(",")
          Dim dX, dY, dZ As Double
          If sValArray.Count() >= 3 AndAlso
-            StringToDouble(sValArray(0), dX) AndAlso
-            StringToDouble(sValArray(1), dY) AndAlso
-            StringToDouble(sValArray(2), dZ) Then
+            StringToDoubleAdv(sValArray(0), dX, True) AndAlso
+            StringToDoubleAdv(sValArray(1), dY, True) AndAlso
+            StringToDoubleAdv(sValArray(2), dZ, True) Then
             m_BTLPartM.refGrainDir = New Vector3d(dX, dY, dZ)
             EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_GRAINDIR, sValArray(0) & "," &
                                                     sValArray(1) & "," &
@@ -994,9 +994,9 @@ Public Class BTLPartVM
       Set(value As Boolean)
          Dim sValArray() As String = GrainDirection.Split(",")
          If sValArray.Count() >= 3 AndAlso
-            StringToDouble(sValArray(0), m_BTLPartM.refGrainDir.x) AndAlso
-            StringToDouble(sValArray(1), m_BTLPartM.refGrainDir.y) AndAlso
-            StringToDouble(sValArray(2), m_BTLPartM.refGrainDir.z) AndAlso
+            StringToDoubleAdv(sValArray(0), m_BTLPartM.refGrainDir.x, True) AndAlso
+            StringToDoubleAdv(sValArray(1), m_BTLPartM.refGrainDir.y, True) AndAlso
+            StringToDoubleAdv(sValArray(2), m_BTLPartM.refGrainDir.z, True) AndAlso
             EgtSetInfo(m_BTLPartM.nPartId, BTL_PRT_GRAINDIR, sValArray(0) & "," &
                                                     sValArray(1) & "," &
                                                     sValArray(2) & ";" &
@@ -1395,7 +1395,7 @@ Public Class BTLPartVM
    Public ReadOnly Property Section As SectionXMaterial
       Get
          Dim nOrigGroupId As Integer = nPartId
-         If Map.refMainMenuVM.SelPage = Pages.VIEW AndAlso Map.refShowBeamPanelVM.ShowBuilding_IsChecked AndAlso Map.refShowBeamPanelVM.bShowAll Then
+         If Map.refMainMenuVM.SelPage = Pages.VIEW AndAlso EgtBeamGetBuildingIsOn() AndAlso Map.refShowBeamPanelVM.bShowAll Then
             nOrigGroupId = GetOrigFrameGroup(nPartId)
          End If
          Dim frBeam As New Frame3d
@@ -1530,6 +1530,7 @@ Public Class BTLPartVM
                m_SelBTLFeatureVM.RefreshFCMBtnVisibility()
                ' aggiorno stato abilitazione del bottone modifica free contour
                Map.refFeatureManagerVM.SetEditIsEnabled()
+               Map.refFeatureManagerVM.NotifyPropertyChanged(NameOf(Map.refFeatureManagerVM.Priority_Visibility))
             Else
                EgtDeselectAll()
             End If
@@ -2163,7 +2164,7 @@ Public Class BTLPartVM
             ' imposto path disegno da mostrare in BottomPanel
             Dim SelPBTLParam As BTLParamVM = Map.refProjectVM.BTLStructureVM.SelBTLPart.SelBTLFeatureVM.SelPBTLParam
             If Not IsNothing(SelPBTLParam) Then Map.refBottomPanelVM.SetCurrDraw(SelPBTLParam.sDrawPath)
-         Case NameOf(sender.bDO)
+         Case NameOf(sender.bDO), NameOf(sender.sPriority)
             NotifyPropertyChanged(NameOf(bDOALL))
             ' setto pezzo da ricalcolare
             'ResetCalcTotalPart()

EgtBEAMWALL.ViewerOptimizer/BTLViewModel/BTLStructureVM.vb

@@ -243,7 +243,7 @@ Public Class BTLStructureVM
       If Map.refShowBeamPanelVM.ShowSolid_IsChecked Then
          ' tolgo eventuale indicazione solido rimasta da pezzo precedente
          Map.refShowBeamPanelVM.SetShowSolid(False)
-         Map.refProjectVM.BTLStructureVM.ShowSolid(False, BtlPart.nPartId)
+         Map.refProjectVM.BTLStructureVM.ShowSolid(BtlPart.nPartId, False, False)
       End If
       If m_SelBTLPart Is BtlPart Then
          EgtBeamShowFacesName( False)
@@ -1083,7 +1083,7 @@ Public Class BTLStructureVM
       If Not IsNothing(SelBTLPart) Then
          ' se pezzo solido, lo riporto normale
          If Map.refShowBeamPanelVM.ShowSolid_IsChecked Then
-            ShowSolid(False)
+            ShowSolid(GDB_ID.NULL, False, False)
             Map.refShowBeamPanelVM.SetShowSolid(False)
          End If
          ' tolgo pezzo selezionato
@@ -1132,12 +1132,12 @@ Public Class BTLStructureVM
       EgtZoom(ZM.ALL, bRedraw)
    End Sub
 
-   Friend Sub ShowSolid(Optional bRedraw As Boolean = True, Optional nPartId As Integer = GDB_ID.NULL)
+   Friend Sub ShowSolid(nPartId As Integer, bShow As Boolean, Optional bRedraw As Boolean = True)
       ' se non viene passato, recupero il pezzo del primo oggetto selezionato
-      If nPartId = GDB_ID.NULL Then
-         nPartId = If(Not IsNothing(SelBTLPart), SelBTLPart.nPartId, GDB_ID.NULL)
+      If nPartId = GDB_ID.NULL And Not IsNothing(SelBTLPart) Then
+         nPartId = SelBTLPart.nPartId
       End If
-      If nPartId = GDB_ID.NULL Or Not EgtIsPart(nPartId) Then
+      If Not EgtIsPart(nPartId) Then
          Dim nLayerId As Integer = EgtGetParent(nPartId)
          Dim sLayerName As String = ""
          EgtGetName(nLayerId, sLayerName)
@@ -1151,17 +1151,11 @@ Public Class BTLStructureVM
       ' disabilito impostazione modificato
       Dim DisableMgr As New DisableModifiedMgr
 
-      Dim nSolId As Integer = EgtBeamGetSolid(nPartId)
-      If nSolId = GDB_ID.NULL OrElse Not EgtExistsInfo(nSolId, "VALID") Then
-         EgtBeamCalcSolid(nPartId)
-         EgtBeamShowSolid(nPartId, True)
-      Else
-         Dim nStat As Integer
-         EgtGetStatus(EgtGetParent(nSolId), nStat)
-         EgtBeamShowSolid(nPartId, (nStat = GDB_ST.OFF))
-      End If
+      If bShow Then EgtBeamCalcSolid(nPartId)
 
+      EgtBeamShowSolid(nPartId, bShow)
       If bRedraw Then EgtDraw()
+
       ' ripristino precedente impostazione modificato
       DisableMgr.ReEnable()
    End Sub

EgtBEAMWALL.ViewerOptimizer/CALCPanel/CALCPanelVM.vb

@@ -280,8 +280,8 @@ Public Class CALCPanelVM
    End Sub
 
    Private Shared Sub ProcessResults(Bar As Bar)
+      If IsNothing(Bar) Then Return
       ProcessResults(Bar.sBarPath, Bar.nProgramPage, Bar.nBarId)
-
    End Sub
 
    Private Shared Sub ProcessResults(BtlPath As String, nProgramPage As ProjectType, nBarId As Integer)
@@ -312,7 +312,7 @@ Public Class CALCPanelVM
 
             If line.StartsWith("ERR=") Then
                Dim nVal As Integer? = GetVal(line, "ERR")
-               nErr = (If(nVal IsNot Nothing, nVal.Value, 0))
+               nErr = (If(Not IsNothing(nVal), nVal.Value, 0))
                sMsg = ""
                dRot = 0
                nFall = 0
@@ -320,24 +320,24 @@ Public Class CALCPanelVM
                taskId = 0
             ElseIf line.StartsWith("ROT=") Then
                Dim nVal As Integer? = GetVal(line, "ROT")
-               Dim nRot As Integer = (If(nVal IsNot Nothing, nVal.Value, 0))
+               Dim nRot As Integer = (If(Not IsNothing(nVal), nVal.Value, 0))
                dRot = Math.Abs(((4 - nRot) Mod 4) * 90)
                dPartRot = Math.Max(dPartRot, dRot)
                dTotRot = Math.Max(dTotRot, dRot)
             ElseIf line.StartsWith("CUTID=") Then
                Dim nVal As Integer? = GetVal(line, "CUTID")
-               cutId = If(nVal IsNot Nothing, nVal.Value, 0)
+               cutId = If(Not IsNothing(nVal), nVal.Value, 0)
             ElseIf line.StartsWith("TASKID=") Then
                Dim nVal As Integer? = GetVal(line, "TASKID")
-               taskId = (If(nVal IsNot Nothing, nVal.Value, 0))
+               taskId = (If(Not IsNothing(nVal), nVal.Value, 0))
                ProcessResultAdd(ProcessResultList, ProcessResult.CreateTaskResult(cutId, taskId, nErr, sMsg, dRot), nProgramPage)
             ElseIf line.StartsWith("FALL=") Then
                Dim nVal As Integer? = GetVal(line, "FALL")
-               nFall = (If(nVal IsNot Nothing, nVal.Value, 0))
+               nFall = (If(Not IsNothing(nVal), nVal.Value, 0))
                ProcessResultList.Add(ProcessResult.CreateFallResult(cutId, nErr, sMsg, nFall))
             ElseIf line.StartsWith("TIME=") Then
                Dim nVal As Integer? = GetVal(line, "TIME")
-               nTotTime = (If(nVal IsNot Nothing, nVal.Value, 0))
+               nTotTime = (If(Not IsNothing(nVal), nVal.Value, 0))
                ProcessResultList.Add(ProcessResult.CreateTimeResult(cutId, nTotTime))
                'If Bar.nBarType = ProjectType.PROJ AndAlso Not IsNothing(currBTLPart) Then
                '   EgtSetInfo(currBTLPart.nPartId, If(Bar.nBarType = ProjectType.PROJ, ITG_PROJ_TIME, ITG_PROD_TIME), nTotTime, True)

EgtBEAMWALL.ViewerOptimizer/ChangeParameterWnd/ChangeParameterWndVM.vb

@@ -35,7 +35,7 @@ Public Class ChangeParameterWndVM
                ParamIndex += 1
             End While
             ' aggiungo bDO come parametro
-            m_ParamList.Add(New Parameters(NewBTLParam, True))
+            m_ParamList.Add(New Parameters(BTLParamM.CreateNewBTLParam(), True))
             ' seleziono parametro vuoto per dargli un valore iniziale ed evitare che visualizzi sia text che check
             m_SelParam = New Parameters(BTLParamM.CreateNewBTLParam())
             NotifyPropertyChanged(NameOf(SelParam))
@@ -142,9 +142,9 @@ Public Class Parameters
       Set(value As String)
          Select Case m_BTLParamM.nType
             Case BTLParamType.DOUBLE_
-               StringToDouble(value, m_dActualValue)
+               StringToDoubleAdv(value, m_dActualValue, True)
             Case BTLParamType.LENGTH
-               StringToLen(value, m_dActualValue)
+               StringToLenAdv(value, m_dActualValue, True)
             Case Else             ' BTLParamType.STRING_
                m_sActualValue = value
          End Select
@@ -172,9 +172,9 @@ Public Class Parameters
       Set(value As String)
          Select Case m_BTLParamM.nType
             Case BTLParamType.DOUBLE_
-               StringToDouble(value, m_dNewValue)
+               StringToDoubleAdv(value, m_dNewValue, True)
             Case BTLParamType.LENGTH
-               StringToLen(value, m_dNewValue)
+               StringToLenAdv(value, m_dNewValue, True)
             Case Else             ' BTLParamType.STRING_
                m_sNewValue = value
          End Select

EgtBEAMWALL.ViewerOptimizer/ConfigurationPage/ConfigurationPageV.xaml

@@ -5,225 +5,290 @@
                                 xmlns:EgtWPFLib5="clr-namespace:EgtWPFLib5;assembly=EgtWPFLib5"
                                 xmlns:EgtBEAMWALL="clr-namespace:EgtBEAMWALL.ViewerOptimizer">
 
-    <Grid>
-        <Grid.ColumnDefinitions>
-           <ColumnDefinition Width="10*"/>
-           <ColumnDefinition Width="1*"/>
-        </Grid.ColumnDefinitions>
-        <Grid.RowDefinitions>
-           <RowDefinition Height="6*"/>
-           <RowDefinition Height="1*"/>
-        </Grid.RowDefinitions>
-        <TabControl Grid.Row="0" Grid.Column="0" Grid.RowSpan="2" Grid.ColumnSpan="2">
-            <TabItem Header="General">
-                <TabItem.Content>
-                    <Grid>
-                        <Grid.ColumnDefinitions>
-                            <ColumnDefinition Width="1*"/>
-                            <ColumnDefinition Width="1*"/>
-                            <ColumnDefinition Width="1*"/>
-                        </Grid.ColumnDefinitions>
-                        <Grid.RowDefinitions>
-                            <RowDefinition Height="1*"/>
-                            <RowDefinition Height="1*"/>
-                        </Grid.RowDefinitions>
-                        <StackPanel Grid.Row="0" Grid.Column="0" Margin="5,5,5,0">
-                            <GroupBox Header="{Binding CurrentLanguage_Msg}"
+   <Grid>
+      <Grid.ColumnDefinitions>
+         <ColumnDefinition Width="10*"/>
+         <ColumnDefinition Width="1*"/>
+      </Grid.ColumnDefinitions>
+      <Grid.RowDefinitions>
+         <RowDefinition Height="6*"/>
+         <RowDefinition Height="1*"/>
+      </Grid.RowDefinitions>
+      <TabControl Grid.Row="0" Grid.Column="0" Grid.RowSpan="2" Grid.ColumnSpan="2"
+                    SelectedIndex="{Binding SelConfigSubPage}">
+         <TabItem Header="General">
+            <TabItem.Content>
+               <Grid>
+                  <Grid.ColumnDefinitions>
+                     <ColumnDefinition Width="1*"/>
+                     <ColumnDefinition Width="1*"/>
+                     <ColumnDefinition Width="1*"/>
+                  </Grid.ColumnDefinitions>
+                  <Grid.RowDefinitions>
+                     <RowDefinition Height="1*"/>
+                     <RowDefinition Height="1*"/>
+                  </Grid.RowDefinitions>
+                  <StackPanel Grid.Row="0" Grid.Column="0" Margin="5,5,5,0">
+                     <GroupBox Header="{Binding CurrentLanguage_Msg}"
                       Margin="0,0,0,5">
-                                <UniformGrid Rows="2" Margin="3,3,3,3">
-                                    <ComboBox ItemsSource="{Binding LanguageList, Mode=OneWay}" Height="25"
+                        <UniformGrid Rows="2" Margin="3,3,3,3">
+                           <ComboBox ItemsSource="{Binding LanguageList, Mode=OneWay}" Height="25"
                             DisplayMemberPath="Name" SelectedItem="{Binding SelectedLanguage}"
                             Margin="0,0,0,5"/>
-                                    <TextBlock Text="{Binding LanguageAdvert_Msg}" TextWrapping="Wrap"
+                           <TextBlock Text="{Binding LanguageAdvert_Msg}" TextWrapping="Wrap"
                   TextAlignment="Center"/>
-                                </UniformGrid>
-                            </GroupBox>
-                            <UniformGrid Columns="2"
+                        </UniformGrid>
+                     </GroupBox>
+                     <UniformGrid Columns="2"
                          Margin="0,0,0,5">
-                                <TextBlock Text="{Binding MMUnits_Msg}" VerticalAlignment="Center"/>
-                                <ComboBox ItemsSource="{Binding UnitMeasureList, Mode=OneWay}"
+                        <TextBlock Text="{Binding MMUnits_Msg}" VerticalAlignment="Center"/>
+                        <ComboBox ItemsSource="{Binding UnitMeasureList, Mode=OneWay}"
                                  SelectedIndex="{Binding SelMeasureUnit}" Height="25"
                                  Margin="0,5,0,0"/>
-                            </UniformGrid>
-                            <GroupBox Header="{Binding Nesting_Msg}"
+                     </UniformGrid>
+                     <GroupBox Header="{Binding Nesting_Msg}"
                       Margin="0,0,0,5">
-                                <StackPanel>
-                                    <UniformGrid Columns="2"
+                        <StackPanel>
+                           <UniformGrid Columns="2"
                          Margin="0,0,0,5">
-                                        <TextBlock Text="{Binding SectionTime_Msg}"
+                              <TextBlock Text="{Binding SectionTime_Msg}"
                           Grid.Row="0" Grid.Column="0"/>
-                                        <EgtWPFLib5:EgtTextBox Text="{Binding SectionTime, UpdateSourceTrigger=Explicit}"
+                              <EgtWPFLib5:EgtTextBox Text="{Binding SectionTime, UpdateSourceTrigger=Explicit}"
                                       Grid.Row="0" Grid.Column="1"/>
-                                    </UniformGrid>
-                                    <UniformGrid Columns="2"
+                           </UniformGrid>
+                           <UniformGrid Columns="2"
                          Margin="0,0,0,5">
-                                        <TextBlock Text="{Binding PartTime_Msg}"
+                              <TextBlock Text="{Binding PartTime_Msg}"
                           Grid.Row="1" Grid.Column="0"/>
-                                        <EgtWPFLib5:EgtTextBox Text="{Binding PartTime, UpdateSourceTrigger=Explicit}"
+                              <EgtWPFLib5:EgtTextBox Text="{Binding PartTime, UpdateSourceTrigger=Explicit}"
                                       Grid.Row="1" Grid.Column="1"/>
-                                    </UniformGrid>
-                                </StackPanel>
-                            </GroupBox>
+                           </UniformGrid>
                         </StackPanel>
-                    </Grid>
-                </TabItem.Content>
-            </TabItem>
-            <TabItem Header="Parametri Q">
-                <TabItem.Content>
-                    <Grid>
-                        <Grid.ColumnDefinitions>
-                            <ColumnDefinition Width="2*"/>
-                            <ColumnDefinition Width="1*"/>
-                        </Grid.ColumnDefinitions>
-                        <Grid.RowDefinitions>
-                            <RowDefinition Height="1*"/>
-                        </Grid.RowDefinitions>
-                        <EgtBEAMWALL:QParamListV DataContext="{Binding}" 
+                     </GroupBox>
+                     <UniformGrid Columns="2"
+                         Margin="0,0,0,5">
+                        <TextBlock Text="{Binding PrintLabel_Msg}" VerticalAlignment="Center"/>
+                        <CheckBox IsChecked="{Binding bPrintLabel_IsChecked}"
+                                 Margin="0,5,0,0"/>
+                     </UniformGrid>
+                     <GroupBox Header="Backup And Restore">
+                        <Grid>
+                           <Grid.RowDefinitions>
+                              <RowDefinition Height="Auto"/>
+                              <RowDefinition Height="Auto"/>
+                              <RowDefinition Height="Auto"/>
+                              <RowDefinition Height="Auto"/>
+                           </Grid.RowDefinitions>
+                           <Grid Grid.Row="0"
+                                 Margin="0,2,0,5">
+                              <Grid.ColumnDefinitions>
+                                 <ColumnDefinition Width="Auto"/>
+                                 <ColumnDefinition Width="1*"/>
+                              </Grid.ColumnDefinitions>
+                              <CheckBox x:Name="ExternalBackup_CheckBox"
+                                        IsChecked="{Binding bExternalBackupActive}"
+                                        VerticalAlignment="Center"/>
+                              <TextBlock Grid.Column="1"
+                                         Text="External file path:"
+                                         VerticalAlignment="Center"/>
+                           </Grid>
+                           <Grid Grid.Row="1"
+                                 Margin="0,2,0,5">
+                              <Grid.ColumnDefinitions>
+                                 <ColumnDefinition Width="1*"/>
+                                 <ColumnDefinition Width="Auto"/>
+                              </Grid.ColumnDefinitions>
+                              <TextBox Text="{Binding ExternalBackupFolderPath}"
+                                       IsEnabled="{Binding IsChecked, ElementName=ExternalBackup_CheckBox}"
+                                       Margin="0,0,2.5,0"/>
+                              <Button Grid.Column="1"
+                                      Content="..."
+                                      Width="18"
+                                      Command="{Binding ChooseExternalBackupFolderPath_Command}"
+                                      IsEnabled="{Binding IsChecked, ElementName=ExternalBackup_CheckBox}"
+                                      Margin="2.5,0,0,0"/>
+                           </Grid>
+                           <Grid Grid.Row="2">
+                              <Grid.ColumnDefinitions>
+                                 <ColumnDefinition Width="1*"/>
+                                 <ColumnDefinition Width="Auto"/>
+                              </Grid.ColumnDefinitions>
+                              <TextBlock Text="Reminder Frequency"/>
+                              <ComboBox Grid.Column="1"
+                                        ItemsSource="{Binding ReminderList}"
+                                        SelectedItem="{Binding SelReminder}"/>
+                           </Grid>
+                           <StackPanel Grid.Row="3"
+                                       Orientation="Horizontal">
+                              <Button Content="Backup"
+                                      Command="{Binding Backup_Command}"
+                                      Style="{StaticResource ToolBar_TextButton}"/>
+                              <Button Content="Restore"
+                                      Command="{Binding Restore_Command}"
+                                      Style="{StaticResource ToolBar_TextButton}"/>
+                           </StackPanel>
+                        </Grid>
+                     </GroupBox>
+                  </StackPanel>
+               </Grid>
+            </TabItem.Content>
+         </TabItem>
+         <TabItem Header="Parametri Q">
+            <TabItem.Content>
+               <Grid>
+                  <Grid.ColumnDefinitions>
+                     <ColumnDefinition Width="2*"/>
+                     <ColumnDefinition Width="1*"/>
+                  </Grid.ColumnDefinitions>
+                  <Grid.RowDefinitions>
+                     <RowDefinition Height="1*"/>
+                  </Grid.RowDefinitions>
+                  <EgtBEAMWALL:QParamListV DataContext="{Binding}" 
                                            ItemsSource="{Binding QBTLParamVMList}"
                                            SelectedItem="{Binding SelQParam}"
                                            Grid.Column="0"
                                            Margin="5">
-                            <DataGrid.GroupStyle>
-                                <GroupStyle>
-                                    <GroupStyle.Panel>
-                                        <ItemsPanelTemplate>
-                                            <DataGridRowsPresenter/>
-                                        </ItemsPanelTemplate>
-                                    </GroupStyle.Panel>
-                                    <GroupStyle.HeaderTemplate>
-                                        <DataTemplate>
-                                            <StackPanel>
-                                                <TextBlock Text="{Binding Path=Name}"/>
-                                            </StackPanel>
-                                        </DataTemplate>
-                                    </GroupStyle.HeaderTemplate>
-                                    <GroupStyle.ContainerStyle>
-                                        <Style TargetType="{x:Type GroupItem}">
-                                            <Setter Property="Template">
-                                                <Setter.Value>
-                                                    <ControlTemplate TargetType="{x:Type GroupItem}">
-                                                        <Expander IsExpanded="True">
-                                                            <Expander.Background>
-                                                                <SolidColorBrush Color="#FFBABABA"></SolidColorBrush>
-                                                            </Expander.Background>
-                                                            <Expander.Header>
-                                                                <StackPanel Orientation="Horizontal">
-                                                                    <TextBlock Text="{Binding Path=Name}" />
-                                                                </StackPanel>
-                                                            </Expander.Header>
-                                                            <ItemsPresenter />
-                                                        </Expander>
-                                                    </ControlTemplate>
-                                                </Setter.Value>
-                                            </Setter>
-                                        </Style>
-                                    </GroupStyle.ContainerStyle>
-                                </GroupStyle>
-                                <GroupStyle>
-                                    <GroupStyle.ContainerStyle>
-                                        <Style TargetType="{x:Type GroupItem}">
-                                            <Setter Property="Template">
-                                                <Setter.Value>
-                                                    <ControlTemplate TargetType="{x:Type GroupItem}">
-                                                        <Expander IsExpanded="True">
-                                                            <Expander.Background>
-                                                                <SolidColorBrush Color="LightGray"></SolidColorBrush>
-                                                            </Expander.Background>
-                                                            <Expander.Header>
-                                                                <StackPanel Orientation="Horizontal">
-                                                                    <TextBlock Text="{Binding Path=Name}" />
-                                                                </StackPanel>
-                                                            </Expander.Header>
-                                                            <ItemsPresenter />
-                                                        </Expander>
-                                                    </ControlTemplate>
-                                                </Setter.Value>
-                                            </Setter>
-                                        </Style>
-                                    </GroupStyle.ContainerStyle>
-                                </GroupStyle>
-                            </DataGrid.GroupStyle>
-                        </EgtBEAMWALL:QParamListV>
-                    </Grid>
-                </TabItem.Content>
-            </TabItem>
-            <TabItem Header="Macchina">
-                <TabItem.Content>
-                    <Grid>
-                        <Grid.ColumnDefinitions>
-                            <ColumnDefinition Width="Auto"/>
-                            <ColumnDefinition Width="1*"/>
-                            <ColumnDefinition Width="1*"/>
-                            <ColumnDefinition Width="1*"/>
-                        </Grid.ColumnDefinitions>
-                        <Grid.RowDefinitions>
-                            <RowDefinition Height="Auto"/>
-                            <RowDefinition Height="10*"/>
-                        </Grid.RowDefinitions>
-    
-                        <StackPanel Grid.Row="0" Grid.Column="0" Orientation="Horizontal">
-                            <GroupBox Style="{StaticResource GroupBoxStyle_NoHeader}" Padding="5,10,5,5">
-                                <EgtBEAMWALL:MachinePanelV  DataContext="{Binding MachinePanelVM}" VerticalAlignment="Center"/>
-                            </GroupBox>
-                        </StackPanel>
-    
-                        <StackPanel Grid.Row="1" Grid.Column="0" Orientation="Horizontal">
-                            <ItemsControl ItemsSource="{Binding ConfigMachTableList}">
-                                <ItemsControl.ItemsPanel>
-                                    <ItemsPanelTemplate>
-                                        <StackPanel x:Name="GroupStackPanel" Orientation="Horizontal"/>
-                                    </ItemsPanelTemplate>
-                                </ItemsControl.ItemsPanel>
-                                <ItemsControl.ItemTemplate>
-                                    <DataTemplate>
-                                        <GroupBox Header="{Binding sName}"  Width="Auto" VerticalAlignment="Top" Height="Auto">
-                                            <ItemsControl Name="MachParamsItemsControl" ItemsSource="{Binding MachParamList}" Margin="0,5,0,0">
-                                                <ItemsControl.ItemsPanel>
-                                                    <ItemsPanelTemplate>
-                                                        <WrapPanel Orientation="Vertical"/>
-                                                    </ItemsPanelTemplate>
-                                                </ItemsControl.ItemsPanel>
-                                                <ItemsControl.ItemTemplate>
-                                                    <DataTemplate>
-                                                        <Grid Margin="0,0,5,5">
-                                                            <Grid.ColumnDefinitions>
-                                                                <ColumnDefinition Width="*" />
-                                                                <ColumnDefinition Width="*" />
-                                                                <ColumnDefinition Width="*" />
-                                                            </Grid.ColumnDefinitions>
-                                                            <TextBlock Text="{Binding sName}"
+                     <DataGrid.GroupStyle>
+                        <GroupStyle>
+                           <GroupStyle.Panel>
+                              <ItemsPanelTemplate>
+                                 <DataGridRowsPresenter/>
+                              </ItemsPanelTemplate>
+                           </GroupStyle.Panel>
+                           <GroupStyle.HeaderTemplate>
+                              <DataTemplate>
+                                 <StackPanel>
+                                    <TextBlock Text="{Binding Path=Name}"/>
+                                 </StackPanel>
+                              </DataTemplate>
+                           </GroupStyle.HeaderTemplate>
+                           <GroupStyle.ContainerStyle>
+                              <Style TargetType="{x:Type GroupItem}">
+                                 <Setter Property="Template">
+                                    <Setter.Value>
+                                       <ControlTemplate TargetType="{x:Type GroupItem}">
+                                          <Expander IsExpanded="True">
+                                             <Expander.Background>
+                                                <SolidColorBrush Color="#FFBABABA"></SolidColorBrush>
+                                             </Expander.Background>
+                                             <Expander.Header>
+                                                <StackPanel Orientation="Horizontal">
+                                                   <TextBlock Text="{Binding Path=Name}" />
+                                                </StackPanel>
+                                             </Expander.Header>
+                                             <ItemsPresenter />
+                                          </Expander>
+                                       </ControlTemplate>
+                                    </Setter.Value>
+                                 </Setter>
+                              </Style>
+                           </GroupStyle.ContainerStyle>
+                        </GroupStyle>
+                        <GroupStyle>
+                           <GroupStyle.ContainerStyle>
+                              <Style TargetType="{x:Type GroupItem}">
+                                 <Setter Property="Template">
+                                    <Setter.Value>
+                                       <ControlTemplate TargetType="{x:Type GroupItem}">
+                                          <Expander IsExpanded="True">
+                                             <Expander.Background>
+                                                <SolidColorBrush Color="LightGray"></SolidColorBrush>
+                                             </Expander.Background>
+                                             <Expander.Header>
+                                                <StackPanel Orientation="Horizontal">
+                                                   <TextBlock Text="{Binding Path=Name}" />
+                                                </StackPanel>
+                                             </Expander.Header>
+                                             <ItemsPresenter />
+                                          </Expander>
+                                       </ControlTemplate>
+                                    </Setter.Value>
+                                 </Setter>
+                              </Style>
+                           </GroupStyle.ContainerStyle>
+                        </GroupStyle>
+                     </DataGrid.GroupStyle>
+                  </EgtBEAMWALL:QParamListV>
+               </Grid>
+            </TabItem.Content>
+         </TabItem>
+         <TabItem Header="Macchina">
+            <TabItem.Content>
+               <Grid>
+                  <Grid.ColumnDefinitions>
+                     <ColumnDefinition Width="Auto"/>
+                     <ColumnDefinition Width="1*"/>
+                     <ColumnDefinition Width="1*"/>
+                     <ColumnDefinition Width="1*"/>
+                  </Grid.ColumnDefinitions>
+                  <Grid.RowDefinitions>
+                     <RowDefinition Height="Auto"/>
+                     <RowDefinition Height="10*"/>
+                  </Grid.RowDefinitions>
+
+                  <StackPanel Grid.Row="0" Grid.Column="0" Orientation="Horizontal">
+                     <GroupBox Style="{StaticResource GroupBoxStyle_NoHeader}" Padding="5,10,5,5">
+                        <EgtBEAMWALL:MachinePanelV  DataContext="{Binding MachinePanelVM}" VerticalAlignment="Center"/>
+                     </GroupBox>
+                  </StackPanel>
+
+                  <StackPanel Grid.Row="1" Grid.Column="0" Orientation="Horizontal">
+                     <ItemsControl ItemsSource="{Binding ConfigMachTableList}">
+                        <ItemsControl.ItemsPanel>
+                           <ItemsPanelTemplate>
+                              <StackPanel x:Name="GroupStackPanel" Orientation="Horizontal"/>
+                           </ItemsPanelTemplate>
+                        </ItemsControl.ItemsPanel>
+                        <ItemsControl.ItemTemplate>
+                           <DataTemplate>
+                              <GroupBox Header="{Binding sName}"  Width="Auto" VerticalAlignment="Top" Height="Auto">
+                                 <ItemsControl Name="MachParamsItemsControl" ItemsSource="{Binding MachParamList}" Margin="0,5,0,0">
+                                    <ItemsControl.ItemsPanel>
+                                       <ItemsPanelTemplate>
+                                          <WrapPanel Orientation="Vertical"/>
+                                       </ItemsPanelTemplate>
+                                    </ItemsControl.ItemsPanel>
+                                    <ItemsControl.ItemTemplate>
+                                       <DataTemplate>
+                                          <Grid Margin="0,0,5,5">
+                                             <Grid.ColumnDefinitions>
+                                                <ColumnDefinition Width="*" />
+                                                <ColumnDefinition Width="*" />
+                                                <ColumnDefinition Width="*" />
+                                             </Grid.ColumnDefinitions>
+                                             <TextBlock Text="{Binding sName}"
                                                         TextWrapping="WrapWithOverflow"
                                                         Width="100"
                                                         Style="{StaticResource MachParamTextBlock}"/>
-                                                            <EgtWPFLib5:EgtTextBox Text="{Binding sValue, UpdateSourceTrigger=Explicit}"
+                                             <EgtWPFLib5:EgtTextBox Text="{Binding sValue, UpdateSourceTrigger=Explicit}"
                                                                     Grid.Column="1"
                                                                     Width="70"/>
-                                                            <TextBlock Text="{Binding sDescription}"
+                                             <TextBlock Text="{Binding sDescription}"
                                                         TextWrapping="WrapWithOverflow"
                                                         Width="200"
                                                         Style="{StaticResource MachParamTextBlock}"
                                                         Grid.Column="2"/>
-                                                        </Grid>
-                                                    </DataTemplate>
-                                                </ItemsControl.ItemTemplate>
-                                            </ItemsControl>
-                                        </GroupBox>
-                                    </DataTemplate>
-                                </ItemsControl.ItemTemplate>
-                            </ItemsControl>
-                        </StackPanel>
-                    </Grid>
-                </TabItem.Content>
-            </TabItem>
-        </TabControl>
-    
-        <Button Command="{Binding SaveCommand}"
+                                          </Grid>
+                                       </DataTemplate>
+                                    </ItemsControl.ItemTemplate>
+                                 </ItemsControl>
+                              </GroupBox>
+                           </DataTemplate>
+                        </ItemsControl.ItemTemplate>
+                     </ItemsControl>
+                  </StackPanel>
+               </Grid>
+            </TabItem.Content>
+         </TabItem>
+      </TabControl>
+
+      <Button Command="{Binding SaveCommand}"
                 ToolTip="{Binding SaveToolTip}"
                 Grid.Row="1" 
                 Grid.Column="1"
                 Style="{StaticResource OptionPanel_Button}">
-           <Image Source="/Resources/ProjectManager/Save.png" Stretch="Uniform"/>
-        </Button>
-    
-    </Grid>
+         <Image Source="/Resources/ProjectManager/Save.png" Stretch="Uniform"/>
+      </Button>
+
+   </Grid>
 </DockPanel>

EgtBEAMWALL.ViewerOptimizer/ConfigurationPage/ConfigurationPageVM.vb

@@ -3,15 +3,45 @@ Imports System.IO
 Imports EgtUILib
 Imports EgtWPFLib5
 Imports EgtBEAMWALL.Core
+Imports MS.Internal
+Imports Org.BouncyCastle.X509
+Imports Ionic.Zip
+Imports Org.BouncyCastle.Bcpg
+Imports Microsoft.VisualBasic.ApplicationServices
+Imports Renci.SshNet.Security
 
 Public Class ConfigurationPageVM
    Inherits VMBase
 
+   Public Enum ConfigSubPages As Integer
+      GENERAL = 0
+      QPARAMETERS = 1
+      MACHINE = 2
+   End Enum
+
+   Private m_QParametersModified As Boolean = False
+   Friend ReadOnly Property QParametersModified As Boolean
+      Get
+         Return m_QParametersModified
+      End Get
+   End Property
+   Friend Sub ResetQParametersModified()
+      m_QParametersModified = False
+   End Sub
+
+   Private m_SelConfigSubPage As ConfigSubPages = ConfigSubPages.GENERAL
+   Public Property SelConfigSubPage As Integer
+      Get
+         Return m_SelConfigSubPage
+      End Get
+      Set(value As Integer)
+         m_SelConfigSubPage = value
+      End Set
+   End Property
+
    ' flag modifica parametri Macchina
    Friend bModifyMachParam As Boolean
 
-   ' Definizione comandi
-   Private m_cmdSave As ICommand
 
    Public ReadOnly Property MachinePanelVM As MachinePanelVM
       Get
@@ -105,7 +135,7 @@ Public Class ConfigurationPageVM
       End Get
       Set(value As String)
          Dim dVal As Double = 0
-         If StringToDouble(value, dVal) AndAlso dVal > 0 Then
+         If StringToDoubleAdv(value, dVal, True) AndAlso dVal > 0 Then
             m_SectionTime = dVal
          End If
       End Set
@@ -118,12 +148,82 @@ Public Class ConfigurationPageVM
       End Get
       Set(value As String)
          Dim dVal As Double = 0
-         If StringToDouble(value, dVal) AndAlso dVal > 0 Then
+         If StringToDoubleAdv(value, dVal, True) AndAlso dVal > 0 Then
             m_PartTime = dVal
          End If
       End Set
    End Property
 
+   Private m_bPrintLabel_IsChecked As Boolean
+   Public Property bPrintLabel_IsChecked As String
+      Get
+         Return m_bPrintLabel_IsChecked
+      End Get
+      Set(value As String)
+         m_bPrintLabel_IsChecked = value
+      End Set
+   End Property
+
+   Private m_bBackupRunning As Boolean = False
+   Public ReadOnly Property bBackupRunning As Boolean
+      Get
+         Return m_bBackupRunning
+      End Get
+   End Property
+
+   Private m_bRestoreRunning As Boolean = False
+   Public ReadOnly Property bRestoreRunning As Boolean
+      Get
+         Return m_bRestoreRunning
+      End Get
+   End Property
+
+   Private m_bExternalBackupActive As Boolean
+   Public Property bExternalBackupActive As Boolean
+      Get
+         Return m_bExternalBackupActive
+      End Get
+      Set(value As Boolean)
+         m_bExternalBackupActive = value
+         WriteMainPrivateProfileString(S_BACKUPANDRESTORE, K_EXTERNALBACKUPACTIVE, If(m_bExternalBackupActive, 1, 0))
+      End Set
+   End Property
+
+   Private m_ExternalBackupFolderPath As String
+   Public Property ExternalBackupFolderPath As String
+      Get
+         Return m_ExternalBackupFolderPath
+      End Get
+      Set(value As String)
+         m_ExternalBackupFolderPath = value
+         WriteMainPrivateProfileString(S_BACKUPANDRESTORE, K_EXTERNALFILEPATH, m_ExternalBackupFolderPath)
+      End Set
+   End Property
+
+   Private m_ReminderList As New List(Of IdNameStruct)({New IdNameStruct(0, "Never"), New IdNameStruct(1, "1 day"), New IdNameStruct(2, "2 days"), New IdNameStruct(7, "1 week"), New IdNameStruct(14, "2 weeks"), New IdNameStruct(30, "1 month")})
+   Public ReadOnly Property ReminderList As List(Of IdNameStruct)
+      Get
+         Return m_ReminderList
+      End Get
+   End Property
+
+   Private m_SelReminder As IdNameStruct
+   Public Property SelReminder As IdNameStruct
+      Get
+         Return m_SelReminder
+      End Get
+      Set(value As IdNameStruct)
+         m_SelReminder = value
+         WriteMainPrivateProfileString(S_BACKUPANDRESTORE, K_REMINDERFREQUENCY, m_SelReminder.Id)
+      End Set
+   End Property
+
+   ' Definizione comandi
+   Private m_cmdSave As ICommand
+   Private m_cmdChooseExternalBackupFolderPath As ICommand
+   Private m_cmdBackup As ICommand
+   Private m_cmdRestore As ICommand
+
 #Region "Messages"
 
    Public ReadOnly Property L_Msg As String
@@ -251,6 +351,12 @@ Public Class ConfigurationPageVM
       End Get
    End Property
 
+   Public ReadOnly Property PrintLabel_Msg As String
+      Get
+         Return EgtMsg(61894)
+      End Get
+   End Property
+
 #End Region    ' Messages
 
 #Region "Constructor"
@@ -285,6 +391,7 @@ Public Class ConfigurationPageVM
       ' leggo SectionTime e PartTime
       GetMainPrivateProfileString(S_NEST, K_SECTIONTIME, "", SectionTime)
       GetMainPrivateProfileString(S_NEST, K_PARTTIME, "", PartTime)
+      m_bPrintLabel_IsChecked = (GetMainPrivateProfileInt(S_PRINTER, K_ENABLE, 0) <> 0)
       ' assegno le liste dei parametri della macchina corrente alla ConfigMachTableList alla pagina di Configurazione
       ConfigMachTableList = CurrentMachine.MachTableList
       ' carico i parametri Q dei Process letti dall'ini
@@ -303,10 +410,19 @@ Public Class ConfigurationPageVM
       m_QBTLParamVMList_View = CollectionViewSource.GetDefaultView(m_QBTLParamVMList)
       m_QBTLParamVMList_View.GroupDescriptions.Add(New PropertyGroupDescription(NameOf(QBTLParamVM.GroupType)))
       m_QBTLParamVMList_View.GroupDescriptions.Add(New PropertyGroupDescription(NameOf(QBTLParamVM.ghDesc)))
+      ' leggo dati per backup
+      GetMainPrivateProfileString(S_BACKUPANDRESTORE, K_EXTERNALFILEPATH, "", m_ExternalBackupFolderPath)
+      Dim nDefaultReminderFrequency As Integer = GetMainPrivateProfileInt(S_BACKUPANDRESTORE, K_REMINDERFREQUENCY, 1)
+      SelReminder = m_ReminderList.FirstOrDefault(Function(x) x.Id = nDefaultReminderFrequency)
+      Dim nExternalBackupActive As Integer = GetMainPrivateProfileInt(S_BACKUPANDRESTORE, K_EXTERNALBACKUPACTIVE, 0)
+      m_bExternalBackupActive = nExternalBackupActive > 0
+      NotifyPropertyChanged(NameOf(bExternalBackupActive))
    End Sub
 
 #End Region ' Constructor
 
+#Region "COMMANDS"
+
 #Region "SaveCommand"
 
    ''' <summary>
@@ -325,17 +441,338 @@ Public Class ConfigurationPageVM
    ''' Execute the Save.  This method is invoked by the SaveCommand.
    ''' </summary>
    Public Sub Save()
-      WriteMachParams()
-      WriteMachParamsLua()
-      WriteProcessParams(PRCList.ToList())
-      WriteMainPrivateProfileString(S_GENERAL, K_MESSAGES, m_SelectedLanguage.Name)
-      WriteMainPrivateProfileString(S_SCENE, K_MMUNITS, SelMeasureUnit.ToString())
-      WriteMainPrivateProfileString(S_NEST, K_SECTIONTIME, DoubleToString(m_SectionTime, 5))
-      WriteMainPrivateProfileString(S_NEST, K_PARTTIME, DoubleToString(m_PartTime, 5))
+      VerifyConfigPageModification()
    End Sub
 
 #End Region ' SaveCommand
 
+#Region "ChooseExternalBackupFolderPath"
+
+   ''' <summary>
+   ''' Returns a command that do Save.
+   ''' </summary>
+   Public ReadOnly Property ChooseExternalBackupFolderPath_Command As ICommand
+      Get
+         If m_cmdChooseExternalBackupFolderPath Is Nothing Then
+            m_cmdChooseExternalBackupFolderPath = New Command(AddressOf ChooseExternalBackupFolderPath)
+         End If
+         Return m_cmdChooseExternalBackupFolderPath
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Execute the Save.  This method is invoked by the SaveCommand.
+   ''' </summary>
+   Public Sub ChooseExternalBackupFolderPath()
+      'Dim FileDialog As New System.Windows.Forms.FolderBrowserDialog With {.SelectedPath = m_ExternalBackupFolderPath,
+      '                                                                     .Description = "Backup & Restore File Path"}
+      Dim FileDialog As New Microsoft.Win32.SaveFileDialog() With {.InitialDirectory = m_ExternalBackupFolderPath,
+                                                                   .CheckFileExists = False,
+                                                                   .CheckPathExists = False,
+                                                                   .DefaultExt = ".folder",
+                                                                   .OverwritePrompt = False,
+                                                                   .FileName = "Select this ",
+                                                                   .Title = "Backup & Restore File Path"}
+      If FileDialog.ShowDialog() Then
+         m_ExternalBackupFolderPath = Path.GetDirectoryName(FileDialog.FileName)
+         WriteMainPrivateProfileString(S_BACKUPANDRESTORE, K_EXTERNALFILEPATH, m_ExternalBackupFolderPath)
+         NotifyPropertyChanged(NameOf(ExternalBackupFolderPath))
+      End If
+   End Sub
+
+#End Region ' ChooseExternalBackupFolderPath
+
+#Region "Backup"
+
+   ''' <summary>
+   ''' Returns a command that do Save.
+   ''' </summary>
+   Public ReadOnly Property Backup_Command As ICommand
+      Get
+         If m_cmdBackup Is Nothing Then
+            m_cmdBackup = New Command(AddressOf BackupCmd)
+         End If
+         Return m_cmdBackup
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Execute the Save.  This method is invoked by the SaveCommand.
+   ''' </summary>
+   Public Sub BackupCmd()
+      Backup(True)
+   End Sub
+
+   Public Sub Backup(bLoadingWindow As Boolean)
+      m_bBackupRunning = True
+      ' verifico se esiste cartella backup, altrimenti la creo
+      Dim sBackupFolder As String = Map.refMainWindowVM.MainWindowM.sDataDir & "\Backup"
+      If Directory.Exists(sBackupFolder) Then
+         ' verifico se devo cancellare backup vecchi
+         Dim nBackupCount As Integer = 0
+         Dim YearDirList() As String = Directory.GetDirectories(sBackupFolder)
+         For YearIndex = YearDirList.Length - 1 To 0 Step -1
+            Dim nYear As Integer = 0
+            Integer.TryParse(Path.GetFileName(YearDirList(YearIndex)), nYear)
+            Dim sYearDir As String = sBackupFolder & "\" & nYear
+            Dim MonthDirList() As String = Directory.GetDirectories(sYearDir)
+            For MonthIndex = MonthDirList.Length - 1 To 0 Step -1
+               Dim nMonth As Integer = 0
+               Integer.TryParse(Path.GetFileName(MonthDirList(MonthIndex)), nMonth)
+               Dim sMonthDir As String = sYearDir & "\" & nMonth
+               Dim DayDirList() As String = Directory.GetDirectories(sMonthDir)
+               For DayIndex = DayDirList.Length - 1 To 0 Step -1
+                  Dim nDay As Integer = 0
+                  Integer.TryParse(Path.GetFileName(DayDirList(DayIndex)), nDay)
+                  If nBackupCount > 3 Then
+                     Directory.Delete(sBackupFolder & "\" & nYear & "\" & nMonth & "\" & nDay, True)
+                  End If
+               Next
+               DayDirList = Directory.GetDirectories(sMonthDir)
+               If IsNothing(DayDirList) OrElse DayDirList.Length = 0 Then
+                  Directory.Delete(sMonthDir)
+               End If
+            Next
+            MonthDirList = Directory.GetDirectories(sYearDir)
+            If IsNothing(MonthDirList) OrElse MonthDirList.Length = 0 Then
+               Directory.Delete(sYearDir)
+            End If
+         Next
+      Else
+         Directory.CreateDirectory(sBackupFolder)
+      End If
+      sBackupFolder &= "\" & DateTime.Now().Year
+      If Not Directory.Exists(sBackupFolder) Then
+         Directory.CreateDirectory(sBackupFolder)
+      End If
+      sBackupFolder &= "\" & DateTime.Now().Month
+      If Not Directory.Exists(sBackupFolder) Then
+         Directory.CreateDirectory(sBackupFolder)
+      End If
+      sBackupFolder &= "\" & DateTime.Now().Day
+      If Not Directory.Exists(sBackupFolder) Then
+         Directory.CreateDirectory(sBackupFolder)
+      End If
+      sBackupFolder &= "\" & DateTime.Now().ToString("yyyyMMddHHmmss") & ".bwbck"
+      Dim sBackupZipPath As String = Map.refMainWindowVM.MainWindowM.sTempDir & "\DbBackup.zip"
+      ' apro finestra di caricamento
+      If bLoadingWindow Then LoadingWndHelper.OpenLoadingWnd(ActiveIds.BACKUP, 2, "Backup", "Database backup", 15)           ' Backup     ' Database backup
+      Dim bOk As Boolean = True
+      ' backup del Db corrente
+      Try
+         DataLayer.DbConfig.DataBaseDumpToFile(sBackupZipPath)
+      Catch ex As Exception
+         MessageBox.Show("Backup failed! Impossible to create the backup package!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         bOk = False
+      End Try
+      If bOk AndAlso File.Exists(sBackupZipPath) Then
+         If bLoadingWindow Then LoadingWndHelper.UpdateLoadingWnd(ActiveIds.BACKUP, 2, "Projects backup", 15, 100)        ' Projects backup
+         ' backup dei progetti correnti
+         Try
+            Using zip As New Ionic.Zip.ZipFile(sBackupFolder, Console.Out)
+               zip.AlternateEncodingUsage = ZipOption.Always
+               zip.AlternateEncoding = Text.Encoding.UTF8
+               zip.CompressionMethod = CompressionMethod.None
+               ' aggiungo Db
+               zip.AddItem(sBackupZipPath, "")
+               ' aggiungo cartella progetti
+               Dim sProjectFolder As String = Map.refMainWindowVM.MainWindowM.sDataDir & "\"
+               Dim sKey As String = ""
+               EgtGetKeyInfo(sKey)
+               sKey = sKey.Replace(" ", "")
+               Dim sUserFolder As String = ""
+               If Not IsNothing(sKey) AndAlso sKey.Length > 11 Then
+                  sUserFolder = sKey.Substring(3, 6)
+                  sProjectFolder &= sUserFolder
+               End If
+               zip.AddItem(sProjectFolder, sUserFolder)
+               ' salvo lo zip
+               zip.Save()
+            End Using
+         Catch ex As Exception
+            MessageBox.Show("Backup failed! Impossible to create the backup package!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+            bOk = False
+         End Try
+      End If
+      ' se esiste zip del Db, lo elimino
+      If File.Exists(sBackupZipPath) Then
+         File.Delete(sBackupZipPath)
+      End If
+      ' se richiesto faccio copia su external source
+      If m_bExternalBackupActive Then
+         If Directory.Exists(m_ExternalBackupFolderPath) Then
+            CopyForExternalBackup(sBackupFolder, m_ExternalBackupFolderPath)
+         Else
+            MessageBox.Show("External folder does not exist or is not reachable! Copy to external folder impossible!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         End If
+      End If
+      'chiudo finestra di caricamento
+      If bLoadingWindow Then LoadingWndHelper.CloseLoadingWnd(ActiveIds.BACKUP)
+      m_bBackupRunning = False
+   End Sub
+
+   Private Async Sub CopyForExternalBackup(sBackupFile As String, sExternalBackupFolder As String)
+      Using SourceStream As FileStream = File.Open(sBackupFile, FileMode.Open)
+         Dim sExternalBackupFile As String = sExternalBackupFolder & "\" & Path.GetFileName(sBackupFile)
+         Using DestinationStream As FileStream = File.Create(sExternalBackupFile)
+            Await SourceStream.CopyToAsync(DestinationStream)
+         End Using
+      End Using
+   End Sub
+
+#End Region ' Backup
+
+#Region "Restore"
+
+   ''' <summary>
+   ''' Returns a command that do Save.
+   ''' </summary>
+   Public ReadOnly Property Restore_Command As ICommand
+      Get
+         If m_cmdRestore Is Nothing Then
+            m_cmdRestore = New Command(AddressOf Restore)
+         End If
+         Return m_cmdRestore
+      End Get
+   End Property
+
+   ''' <summary>
+   ''' Execute the Save.  This method is invoked by the SaveCommand.
+   ''' </summary>
+   Public Sub Restore()
+      ' recupero processo del supervisore
+      Dim sSupervisorName As String = "EgtBEAMWALL.SupervisorR32"
+      Dim localProc As Process() = Process.GetProcessesByName(sSupervisorName)
+      ' verifico che sia chiuso
+      If localProc.Length > 0 Then
+         MessageBox.Show("Please verify the machine is stoped and close the supervisor before proceding with the restore operation!", "Warning", MessageBoxButton.OK, MessageBoxImage.Warning)
+         Return
+      End If
+      m_bRestoreRunning = True
+      ' verifico se esiste backup
+      Dim sBackupFolder As String = Map.refMainWindowVM.MainWindowM.sDataDir & "\Backup"
+      Dim nYear As Integer = 0
+      Dim nMonth As Integer = 0
+      Dim nDay As Integer = 0
+      Dim sRestorePath As String = ""
+      If Directory.Exists(sBackupFolder) Then
+         Dim YearDirList() As String = Directory.GetDirectories(sBackupFolder)
+         For YearIndex = YearDirList.Length - 1 To 0 Step -1
+            nYear = 0
+            Integer.TryParse(Path.GetFileName(YearDirList(YearIndex)), nYear)
+            Dim sYearDir As String = sBackupFolder & "\" & nYear
+            Dim MonthDirList() As String = Directory.GetDirectories(sYearDir)
+            For MonthIndex = MonthDirList.Length - 1 To 0 Step -1
+               nMonth = 0
+               Integer.TryParse(Path.GetFileName(MonthDirList(MonthIndex)), nMonth)
+               Dim sMonthDir As String = sYearDir & "\" & nMonth
+               Dim DayDirList() As String = Directory.GetDirectories(sMonthDir)
+               For DayIndex = DayDirList.Length - 1 To 0 Step -1
+                  nDay = 0
+                  Integer.TryParse(Path.GetFileName(DayDirList(DayIndex)), nDay)
+                  Dim sDayDir As String = sMonthDir & "\" & nDay
+                  Dim VersionList() As String = Directory.GetFiles(sDayDir)
+                  If VersionList.Length > 0 Then
+                     Dim nMaxVersion As Int64 = VersionList.Max(Function(x) Int64.Parse(Path.GetFileNameWithoutExtension(x)))
+                     sRestorePath = sDayDir & "\" & nMaxVersion & ".bwbck"
+                     Exit For
+                  End If
+               Next
+               If Not String.IsNullOrEmpty(sRestorePath) Then Exit For
+            Next
+            If Not String.IsNullOrEmpty(sRestorePath) Then Exit For
+         Next
+      End If
+      If String.IsNullOrEmpty(sRestorePath) Then
+         MessageBox.Show("Restore impossible! Last backup not found!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+      End If
+      If MessageBox.Show("Are you sure you want to restore the last backup from " & nYear & "\" & nMonth & "\" & nDay & "? If you proceed you will lose actual data!", "Warning", MessageBoxButton.OKCancel, MessageBoxImage.Warning) <> MessageBoxResult.OK Then Return
+      Dim bDoBackup = False
+      Select Case MessageBox.Show("Do you want to do a backup of the current project before proceding with the restore?", "Information", MessageBoxButton.YesNoCancel, MessageBoxImage.Information)
+         Case MessageBoxResult.Yes
+            bDoBackup = True
+         Case MessageBoxResult.No
+            bDoBackup = False
+         Case MessageBoxResult.Cancel
+            MessageBox.Show("Restore operation aborted!", "Warning", MessageBoxButton.OK, MessageBoxImage.Warning)
+            m_bRestoreRunning = False
+            Return
+      End Select
+      ' apro finestra di caricamento
+      LoadingWndHelper.OpenLoadingWnd(ActiveIds.RESTORE, 3, "Restore", "Backup current", If(bDoBackup, 40, 10))           ' Restore     ' Database Restore
+      If bDoBackup Then
+         Backup(False)
+      End If
+      ' recupero cartella corrente dei progetti 
+      Dim sProjectFolder As String = Map.refMainWindowVM.MainWindowM.sDataDir
+      Dim sKey As String = ""
+      EgtGetKeyInfo(sKey)
+      sKey = sKey.Replace(" ", "")
+      Dim sUserFolder As String = ""
+      If Not IsNothing(sKey) AndAlso sKey.Length > 11 Then
+         sUserFolder = sKey.Substring(3, 6)
+      End If
+      If Directory.Exists(sProjectFolder & "\" & sUserFolder) Then
+         ' se faccio backup elimino cartella dei progetti
+         If bDoBackup Then
+            Directory.Delete(sProjectFolder & "\" & sUserFolder, True)
+         Else
+            ' altrimenti la rinomino old
+            If Directory.Exists(sProjectFolder & "\" & sUserFolder & ".old") Then
+               Directory.Delete(sProjectFolder & "\" & sUserFolder & ".old", True)
+            End If
+            Directory.Move(sProjectFolder & "\" & sUserFolder, sProjectFolder & "\" & sUserFolder & ".old")
+         End If
+      End If
+      LoadingWndHelper.UpdateLoadingWnd(ActiveIds.RESTORE, 2, "Restore data extraction", If(bDoBackup, 40, 10), 80)        ' Restore data extraction
+      ' estraggo lo zip nella cartella Temp
+      Dim sRestoreDir As String = Map.refMainWindowVM.MainWindowM.sTempDir & "\Restore"
+      If Directory.Exists(sRestoreDir) Then
+         Directory.Delete(sRestoreDir, True)
+      End If
+      Directory.CreateDirectory(sRestoreDir)
+      Dim bOk As Boolean = True
+      ' apro file zip
+      Try
+         Using zip As New Ionic.Zip.ZipFile(sRestorePath, Console.Out)
+            ' estraggo file da zip
+            zip.ExtractAll(sRestoreDir)
+         End Using
+      Catch ex1 As Exception
+         EgtOutLog("Error! Impossible importing Recovery file " & sRestorePath & "!")
+         EgtOutLog("Exception in zip: " & ex1.ToString())
+         MessageBox.Show("Impossible importing Recovery file!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+         bOk = False
+      End Try
+      Dim sBackupTempPath As String = Map.refMainWindowVM.MainWindowM.sTempDir & "\DbRestore"
+      LoadingWndHelper.UpdateLoadingWnd(ActiveIds.RESTORE, 3, "Database restore", 80, 100)        ' Database restore
+      If bOk Then
+         ' restore del Db
+         Try
+            DataLayer.DbConfig.DataBaseRestoreFromFile(sRestoreDir & "\DbBackup.zip", "", sBackupTempPath)
+         Catch ex As Exception
+            MessageBox.Show("Restore failed! Impossible to restore the backup Database!", "Error", MessageBoxButton.OK, MessageBoxImage.Error)
+            bOk = False
+         End Try
+      End If
+      If File.Exists(sRestoreDir & "\DbBackup.zip") Then
+         File.Delete(sRestoreDir & "\DbBackup.zip")
+      End If
+      If bOk Then
+         ' sposto il backup al posto giusto
+         Directory.Move(sRestoreDir & "\" & sUserFolder, sProjectFolder & "\" & sUserFolder)
+      End If
+      If Directory.Exists(sRestoreDir) Then
+         Directory.Delete(sRestoreDir)
+      End If
+      LoadingWndHelper.CloseLoadingWnd(ActiveIds.RESTORE)
+      m_bRestoreRunning = False
+   End Sub
+
+#End Region ' Restore
+
+#End Region    ' COMMANDS
+
 #Region "Methods"
 
    ' funzione che scrive i parametri modificati sul file INI
@@ -415,58 +852,69 @@ Public Class ConfigurationPageVM
 
    ' funzione che verifica la modifica dei valori in Configurazione e ne chiede il salvataggio
    Friend Sub VerifyConfigPageModification()
-      ' Prima ciclo sui parametri Macchina
       Dim bExitFor = False
-      For Each MachTableItem In ConfigMachTableList
-         For Each MachParamItem In MachTableItem.MachParamList
-            If MachParamItem.IsModified Then
-               If MessageBox.Show(EgtMsg(61860), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
-                  ' scrivo i parametri Macchina
-                  WriteMachParams()
-                  WriteMachParamsLua()
-               Else
-                  ' se da non salvare li resetto ed esco dai For
-                  CreateMachParams()
-                  bExitFor = True
-                  Exit For
-               End If
-            End If
-         Next
-         If bExitFor Then Exit For
-      Next
-      ' Ora ciclo sui parametri Q
-      Dim bAskToSaveDefaultValues As Boolean = False
-      bExitFor = False
-      For Each PRCItem In PRCList
-         For Each QParam In PRCItem.QBTLParamVMList
-            If QParam.bIsModified Then
-               bAskToSaveDefaultValues = True
-               ' esco dai For
-               bExitFor = True
-               Exit For
-            End If
-         Next
-         If bExitFor Then Exit For
-      Next
-      ' se nel ciclo è stato trovato almeno un valore modificato chiedo il salvataggio
-      If bAskToSaveDefaultValues Then
-         If MessageBox.Show(EgtMsg(61861), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
-            ' se si è scelto di salvare i valori li scrivo
-            WriteProcessParams(PRCList.ToList())
-         End If
-         ' in ogni caso ricarico i valori (in modo da resettare i flag di modifica)
-         GetQParamsList()
-         ' carico la lista di tutti i parametri Q ciclando su ogni Process di PRCList
-         If Not IsNothing(QBTLParamVMList) Then
-            QBTLParamVMList.Clear()
-         End If
-         For Each PRCItem In PRCList
-            For Each QBTLParam In PRCItem.QBTLParamVMList
-               QBTLParamVMList.Add(QBTLParam)
+      Select Case m_SelConfigSubPage
+         Case ConfigSubPages.GENERAL
+            ' aggiorno tutti i valori senza verificare modifiche
+            WriteMainPrivateProfileString(S_GENERAL, K_MESSAGES, m_SelectedLanguage.Name)
+            WriteMainPrivateProfileString(S_SCENE, K_MMUNITS, SelMeasureUnit.ToString())
+            WriteMainPrivateProfileString(S_NEST, K_SECTIONTIME, DoubleToString(m_SectionTime, 5))
+            WriteMainPrivateProfileString(S_NEST, K_PARTTIME, DoubleToString(m_PartTime, 5))
+            WriteMainPrivateProfileString(S_PRINTER, K_ENABLE, If(m_bPrintLabel_IsChecked, 1, 0))
+         Case ConfigSubPages.QPARAMETERS
+            ' ciclo sui parametri Q
+            Dim bAskToSaveDefaultValues As Boolean = False
+            For Each PRCItem In PRCList
+               For Each QParam In PRCItem.QBTLParamVMList
+                  If QParam.bIsModified Then
+                     bAskToSaveDefaultValues = True
+                     ' esco dai For
+                     bExitFor = True
+                     Exit For
+                  End If
+               Next
+               If bExitFor Then Exit For
             Next
-         Next
-         NotifyPropertyChanged(NameOf(QBTLParamVMList))
-      End If
+            ' se nel ciclo è stato trovato almeno un valore modificato chiedo il salvataggio
+            If bAskToSaveDefaultValues Then
+               If MessageBox.Show(EgtMsg(61861), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+                  ' se si è scelto di salvare i valori li scrivo
+                  WriteProcessParams(PRCList.ToList())
+                  m_QParametersModified = True
+               End If
+               ' in ogni caso ricarico i valori (in modo da resettare i flag di modifica)
+               GetQParamsList()
+               ' carico la lista di tutti i parametri Q ciclando su ogni Process di PRCList
+               If Not IsNothing(QBTLParamVMList) Then
+                  QBTLParamVMList.Clear()
+               End If
+               For Each PRCItem In PRCList
+                  For Each QBTLParam In PRCItem.QBTLParamVMList
+                     QBTLParamVMList.Add(QBTLParam)
+                  Next
+               Next
+               NotifyPropertyChanged(NameOf(QBTLParamVMList))
+            End If
+         Case ConfigSubPages.MACHINE
+            ' ciclo sui parametri Macchina
+            For Each MachTableItem In ConfigMachTableList
+               For Each MachParamItem In MachTableItem.MachParamList
+                  If MachParamItem.IsModified Then
+                     If MessageBox.Show(EgtMsg(61860), "", MessageBoxButton.YesNo, MessageBoxImage.Question) = MessageBoxResult.Yes Then
+                        ' scrivo i parametri Macchina
+                        WriteMachParams()
+                        WriteMachParamsLua()
+                     Else
+                        ' se da non salvare li resetto ed esco dai For
+                        CreateMachParams()
+                        bExitFor = True
+                        Exit For
+                     End If
+                  End If
+               Next
+               If bExitFor Then Exit For
+            Next
+      End Select
    End Sub
 
    ' funzione che verifica l'inserimento della password quando si edita un parametro Macchina
@@ -638,11 +1086,11 @@ Public Class MachParam
             ' trasformo valori
             Select Case nType
                Case MachParamType.DOUBLE_
-                  StringToDouble(value, dNewValue)
-                  StringToDouble(sOrigValue, dOrigValue)
+                  StringToDoubleAdv(value, dNewValue, True)
+                  StringToDoubleAdv(sOrigValue, dOrigValue, True)
                Case MachParamType.LENGTH
-                  StringToLen(value, dNewValue)
-                  StringToLen(sOrigValue, dOrigValue)
+                  StringToLenAdv(value, dNewValue, True)
+                  StringToLenAdv(sOrigValue, dOrigValue, True)
                Case Else
                   ' per string non faccio nulla
             End Select

EgtBEAMWALL.ViewerOptimizer/EgtBEAMWALL.ViewerOptimizer.vbproj

@@ -105,9 +105,44 @@
   <PropertyGroup>
     <ApplicationManifest>app.manifest</ApplicationManifest>
   </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'RemoteDebug|AnyCPU'">
+    <DebugSymbols>true</DebugSymbols>
+    <DefineDebug>true</DefineDebug>
+    <DefineTrace>true</DefineTrace>
+    <OutputPath>bin\RemoteDebug\</OutputPath>
+    <DocumentationFile>EgtBEAMWALL.ViewerOptimizer.xml</DocumentationFile>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
+    <DebugType>full</DebugType>
+    <PlatformTarget>AnyCPU</PlatformTarget>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'RemoteDebug|x64'">
+    <DebugSymbols>true</DebugSymbols>
+    <DefineDebug>true</DefineDebug>
+    <DefineTrace>true</DefineTrace>
+    <OutputPath>bin\x64\RemoteDebug\</OutputPath>
+    <DocumentationFile>EgtBEAMWALL.ViewerOptimizer.xml</DocumentationFile>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
+    <DebugType>full</DebugType>
+    <PlatformTarget>x64</PlatformTarget>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+  </PropertyGroup>
+  <PropertyGroup Condition="'$(Configuration)|$(Platform)' == 'RemoteDebug|x86'">
+    <DebugSymbols>true</DebugSymbols>
+    <DefineDebug>true</DefineDebug>
+    <DefineTrace>true</DefineTrace>
+    <OutputPath>bin\x86\RemoteDebug\</OutputPath>
+    <DocumentationFile>EgtBEAMWALL.ViewerOptimizer.xml</DocumentationFile>
+    <NoWarn>41999,42016,42017,42018,42019,42020,42021,42022,42032,42036,42314</NoWarn>
+    <DebugType>full</DebugType>
+    <PlatformTarget>x86</PlatformTarget>
+    <CodeAnalysisRuleSet>MinimumRecommendedRules.ruleset</CodeAnalysisRuleSet>
+  </PropertyGroup>
   <ItemGroup>
-    <Reference Include="BouncyCastle.Crypto, Version=1.8.5.0, Culture=neutral, PublicKeyToken=0e99375e54769942">
-      <HintPath>..\packages\BouncyCastle.1.8.5\lib\BouncyCastle.Crypto.dll</HintPath>
+    <Reference Include="BouncyCastle.Crypto, Version=1.9.0.0, Culture=neutral, PublicKeyToken=0e99375e54769942, processorArchitecture=MSIL">
+      <HintPath>..\packages\Portable.BouncyCastle.1.9.0\lib\net40\BouncyCastle.Crypto.dll</HintPath>
+    </Reference>
+    <Reference Include="DotNetZip, Version=1.16.0.0, Culture=neutral, PublicKeyToken=6583c7c814667745, processorArchitecture=MSIL">
+      <HintPath>..\packages\DotNetZip.1.16.0\lib\net40\DotNetZip.dll</HintPath>
     </Reference>
     <Reference Include="EgtUILib, Version=2.4.3.1, Culture=neutral, processorArchitecture=MSIL">
       <SpecificVersion>False</SpecificVersion>
@@ -123,20 +158,17 @@
     <Reference Include="EntityFramework.SqlServer, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089, processorArchitecture=MSIL">
       <HintPath>..\packages\EntityFramework.6.4.4\lib\net45\EntityFramework.SqlServer.dll</HintPath>
     </Reference>
-    <Reference Include="Google.Protobuf, Version=3.19.4.0, Culture=neutral, PublicKeyToken=a7d26565bac4d604, processorArchitecture=MSIL">
-      <HintPath>..\packages\Google.Protobuf.3.19.4\lib\net45\Google.Protobuf.dll</HintPath>
+    <Reference Include="Google.Protobuf, Version=3.21.9.0, Culture=neutral, PublicKeyToken=a7d26565bac4d604, processorArchitecture=MSIL">
+      <HintPath>..\packages\Google.Protobuf.3.21.9\lib\net45\Google.Protobuf.dll</HintPath>
     </Reference>
-    <Reference Include="Ionic.Zip, Version=1.9.1.8, Culture=neutral, PublicKeyToken=edbe51ad942a3f5c, processorArchitecture=MSIL">
-      <HintPath>..\packages\Ionic.Zip.1.9.1.8\lib\Ionic.Zip.dll</HintPath>
+    <Reference Include="K4os.Compression.LZ4, Version=1.3.5.0, Culture=neutral, PublicKeyToken=2186fa9121ef231d, processorArchitecture=MSIL">
+      <HintPath>..\packages\K4os.Compression.LZ4.1.3.5\lib\net462\K4os.Compression.LZ4.dll</HintPath>
     </Reference>
-    <Reference Include="K4os.Compression.LZ4, Version=1.2.6.0, Culture=neutral, PublicKeyToken=2186fa9121ef231d, processorArchitecture=MSIL">
-      <HintPath>..\packages\K4os.Compression.LZ4.1.2.6\lib\net46\K4os.Compression.LZ4.dll</HintPath>
+    <Reference Include="K4os.Compression.LZ4.Streams, Version=1.3.5.0, Culture=neutral, PublicKeyToken=2186fa9121ef231d, processorArchitecture=MSIL">
+      <HintPath>..\packages\K4os.Compression.LZ4.Streams.1.3.5\lib\net462\K4os.Compression.LZ4.Streams.dll</HintPath>
     </Reference>
-    <Reference Include="K4os.Compression.LZ4.Streams, Version=1.2.6.0, Culture=neutral, PublicKeyToken=2186fa9121ef231d, processorArchitecture=MSIL">
-      <HintPath>..\packages\K4os.Compression.LZ4.Streams.1.2.6\lib\net46\K4os.Compression.LZ4.Streams.dll</HintPath>
-    </Reference>
-    <Reference Include="K4os.Hash.xxHash, Version=1.0.6.0, Culture=neutral, PublicKeyToken=32cd54395057cec3, processorArchitecture=MSIL">
-      <HintPath>..\packages\K4os.Hash.xxHash.1.0.6\lib\net46\K4os.Hash.xxHash.dll</HintPath>
+    <Reference Include="K4os.Hash.xxHash, Version=1.0.8.0, Culture=neutral, PublicKeyToken=32cd54395057cec3, processorArchitecture=MSIL">
+      <HintPath>..\packages\K4os.Hash.xxHash.1.0.8\lib\net462\K4os.Hash.xxHash.dll</HintPath>
     </Reference>
     <Reference Include="Microsoft.CSharp" />
     <Reference Include="MigraDoc.DocumentObjectModel-wpf, Version=1.50.5147.0, Culture=neutral, PublicKeyToken=f94615aa0424f9eb, processorArchitecture=MSIL">
@@ -177,18 +209,24 @@
     <Reference Include="System.Drawing" />
     <Reference Include="System.Drawing.Design" />
     <Reference Include="System.IO.Compression" />
+    <Reference Include="System.IO.Pipelines, Version=5.0.0.2, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.IO.Pipelines.5.0.2\lib\net461\System.IO.Pipelines.dll</HintPath>
+    </Reference>
     <Reference Include="System.Management" />
-    <Reference Include="System.Memory, Version=4.0.1.1, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
-      <HintPath>..\packages\System.Memory.4.5.4\lib\net461\System.Memory.dll</HintPath>
+    <Reference Include="System.Memory, Version=4.0.1.2, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.Memory.4.5.5\lib\net461\System.Memory.dll</HintPath>
     </Reference>
     <Reference Include="System.Numerics" />
     <Reference Include="System.Numerics.Vectors, Version=4.1.4.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
       <HintPath>..\packages\System.Numerics.Vectors.4.5.0\lib\net46\System.Numerics.Vectors.dll</HintPath>
     </Reference>
-    <Reference Include="System.Runtime.CompilerServices.Unsafe, Version=5.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
-      <HintPath>..\packages\System.Runtime.CompilerServices.Unsafe.5.0.0\lib\net45\System.Runtime.CompilerServices.Unsafe.dll</HintPath>
+    <Reference Include="System.Runtime.CompilerServices.Unsafe, Version=6.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.Runtime.CompilerServices.Unsafe.6.0.0\lib\net461\System.Runtime.CompilerServices.Unsafe.dll</HintPath>
     </Reference>
     <Reference Include="System.Security" />
+    <Reference Include="System.Threading.Tasks.Extensions, Version=4.2.0.1, Culture=neutral, PublicKeyToken=cc7b13ffcd2ddd51, processorArchitecture=MSIL">
+      <HintPath>..\packages\System.Threading.Tasks.Extensions.4.5.4\lib\net461\System.Threading.Tasks.Extensions.dll</HintPath>
+    </Reference>
     <Reference Include="System.Transactions" />
     <Reference Include="System.Windows.Forms" />
     <Reference Include="System.Xml.Linq" />
@@ -955,6 +993,9 @@
   <ItemGroup>
     <Resource Include="Resources\TopPanel\RemoveAllRawPart.png" />
   </ItemGroup>
+  <ItemGroup>
+    <Resource Include="Resources\ProjectManager\AddProj.png" />
+  </ItemGroup>
   <Import Project="$(MSBuildToolsPath)\Microsoft.VisualBasic.targets" />
   <PropertyGroup>
     <PostBuildEvent>IF "$(PlatformName)"=="x86" IF "$(ConfigurationName)" == "Release" copy $(TargetPath) c:\EgtProg\EgtBEAMWALL\EgtBEAMWALL.ViewerOptimizerR32.exe

EgtBEAMWALL.ViewerOptimizer/FeatureManager/FeatureManagerV.xaml

@@ -20,6 +20,16 @@
              SelectedItem="{Binding Tag.nSelGRP, RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:FeatureManagerV}}}"
              IsEnabled="{Binding FeatureManager_IsEnabled}"
              Style="{StaticResource FeatureComboBox}"/>
+   <TextBlock Text="{Binding Priority_Msg}"
+              IsEnabled="{Binding FeatureManager_IsEnabled}"
+              Visibility="{Binding Priority_Visibility}"
+              Style="{StaticResource OptionTextBlock}"/>
+   <EgtWPFLib5:EgtTextBox Text="{Binding Tag.sPriority, 
+                                 RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:FeatureManagerV}},
+                                 UpdateSourceTrigger=Explicit}"
+                          IsEnabled="{Binding FeatureManager_IsEnabled}"
+                          Visibility="{Binding Priority_Visibility}"
+                          Width="45"/>
    <TextBlock Text="{Binding Tag.sName, RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:FeatureManagerV}}}"
               Style="{StaticResource OptionTextBlock}"/>
    <Button Content="{Binding Edit_Msg}"

EgtBEAMWALL.ViewerOptimizer/FeatureManager/FeatureManagerVM.vb

@@ -27,6 +27,12 @@ Public Class FeatureManagerVM
       End Get
    End Property
 
+   Public ReadOnly Property Priority_Visibility As Visibility
+      Get
+         Return If(CurrentMachine.nType = Core.ConstBeam.MachineType.WALL AndAlso CurrentMachine.bIsEnabledPriority, Visibility.Visible, Visibility.Collapsed)
+      End Get
+   End Property
+
 #Region "Messages"
 
    Public ReadOnly Property Face_Msg As String
@@ -41,6 +47,12 @@ Public Class FeatureManagerVM
       End Get
    End Property
 
+   Public ReadOnly Property Priority_Msg As String
+      Get
+         Return EgtMsg(61895)
+      End Get
+   End Property
+
    Public ReadOnly Property Edit_Msg As String
       Get
          Return EgtMsg(61826)

EgtBEAMWALL.ViewerOptimizer/FreeContourManager/FreeContourManagerVM.vb

@@ -271,12 +271,12 @@ Public Class FreeContourManagerVM
    Private m_cmdDelete As ICommand
    Private m_cmdModifyCurve As ICommand
    Private m_cmdAddPointCurve As ICommand
+   Private m_cmdRemovePointCurve As ICommand
    Private m_cmdArcflip As ICommand
    Private m_cmdMove As ICommand
    Private m_cmdRotate As ICommand
    Private m_cmdMirror As ICommand
    Private m_cmdScale As ICommand
-   Private m_cmdRemovePointCurve As ICommand
    Private m_cmdChangeStart As ICommand
    Private m_cmdInvertCurve As ICommand
    Private m_cmdTextAngle As ICommand
@@ -324,7 +324,7 @@ Public Class FreeContourManagerVM
       Map.refProjectVM.NotifyPropertyChanged(NameOf(Map.refProjectVM.PartManager_Visibility))
       ' verifico se solido attivo
       m_bPrevShowSolid = Map.refShowBeamPanelVM.ShowSolid_IsChecked
-      If m_bPrevShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(False)
+      If m_bPrevShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, False, False)
       ' attivo visualizzazione direzione curve
       EgtSetShowCurveDirection(True)
       ' elimino eventuale vecchio layer testi
@@ -367,7 +367,7 @@ Public Class FreeContourManagerVM
                m_SelType = FreeContourTypes.TWO
             End If
          End If
-         ' se nuova senza percorsi
+      ' se nuova senza percorsi
       Else
          ' imposto modalita' un percorso
          m_SelType = FreeContourTypes.ONE
@@ -424,10 +424,12 @@ Public Class FreeContourManagerVM
       NotifyPropertyChanged(NameOf(Line2P_IsEnabled))
       NotifyPropertyChanged(NameOf(TextAngle_Visibility))
       NotifyPropertyChanged(NameOf(PathList_Visibility))
-      ' posiziono la griglia sulla faccia attiva
+      ' posiziono la griglia sul riferimento del contorno libero
       Dim frFace As New Frame3d
       EgtBeamGetSideData(SelFeature.nSelSIDE, frFace)
-      EgtSetGridFrame(frFace)
+      Dim frFrame As Frame3d = SelFeature.BTLFeatureM.frFRAME
+      frFrame.ToGlob( frFace)
+      EgtSetGridFrame(frFrame)
       EgtSetGridShow(True, True)
       Map.refSceneHostVM.MainScene.CPlaneView()
       ' rimetto la selezione scena a null
@@ -442,11 +444,8 @@ Public Class FreeContourManagerVM
    End Sub
 
    Friend Sub Close(bSave As Boolean)
-      If m_bIsActive Then
-         m_bIsActive = False
-      Else
-         Return
-      End If
+      If not m_bIsActive Then Return
+      m_bIsActive = False
       ' gestisco modifiche ai percorsi
       If bSave Then
          Select Case m_SelType
@@ -459,7 +458,8 @@ Public Class FreeContourManagerVM
                Dim sSideAngInfo As String = ""
                For Index = 0 To SideAngValues.Count - 1
                   If Index > 0 Then sSideAngInfo &= ","
-                  sSideAngInfo &= SideAngValues(Index).dValue
+                  Dim sAng As String = DoubleToString(SideAngValues(Index).dValue, 2)
+                  sSideAngInfo &= sAng
                Next
                EgtSetInfo(m_nNewPathId, "SideAngs", sSideAngInfo)
                EgtSetInfo(nSelFeatureId, "AUXID", (m_nNewPathId - nSelFeatureId).ToString("+#;-#;0"))
@@ -474,7 +474,7 @@ Public Class FreeContourManagerVM
          Dim BTLFeatureM As BTLFeatureM = SelFeature.BTLFeatureM
          BTLFeatureM.CalcParamArray(vPar, sPar, vParQ)
          Dim bOK As Boolean = BTLFeatureM.UpdateParams(BTLFeatureM.nSelGRP, BTLFeatureM.nPRC, BTLFeatureM.nSelSIDE, BTLFeatureM.sDES, BTLFeatureM.nPRID,
-      BTLFeatureM.frFRAME, vPar, sPar, vParQ)
+                                                       BTLFeatureM.frFRAME, vPar, sPar, vParQ)
          If bOK Then
             SelFeature.SelGeomFeature()
             ' rendo non calcolata questa feature
@@ -519,7 +519,8 @@ Public Class FreeContourManagerVM
       ' elimino eventuale layer dei testi angoli
       EgtErase(nSideAngTextLayer)
       nSideAngTextLayer = GDB_ID.NULL
-      ' nascondo la griglia
+      ' riporto griglia globale e la nascondo
+      EgtSetGridFrame( New Frame3d())
       EgtSetGridShow(False, False)
       ' se il progetto non era modificato ed esco senza salvare, resetto lo stato di modificato
       If Not m_bAlreadyModified And Not bSave Then
@@ -539,7 +540,7 @@ Public Class FreeContourManagerVM
       Map.refProjectVM.NotifyPropertyChanged(NameOf(Map.refProjectVM.PartManager_Visibility))
       ' disattivo modifiche su scena
       Map.refSceneHostVM.MainScene.SetStatusNull()
-      If m_bPrevShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(False)
+      If m_bPrevShowSolid Then Map.refProjectVM.BTLStructureVM.ShowSolid(GDB_ID.NULL, True, False)
       ' disattivo visualizzazione direzione curve
       EgtSetShowCurveDirection(False)
       ' reimposto filtro selezione
@@ -649,9 +650,10 @@ Public Class FreeContourManagerVM
          EgtAtParamPoint(m_nNewPathId, Index + 0.5, ptText)
          Dim dSideAng As Double = 0
          If sSideAngSplit.Count - 1 >= Index Then
-            StringToDouble(sSideAngSplit(Index), dSideAng)
+            StringToDoubleAdv(sSideAngSplit(Index), dSideAng, True)
          End If
-         Dim TextId As Integer = EgtCreateText(nSideAngTextLayer, ptText, dSideAng & "°", 20)
+         Dim sSideAng As String = DoubleToString( dSideAng, 2) & "°"
+         Dim TextId As Integer = EgtCreateText(nSideAngTextLayer, ptText, sSideAng, 20)
          EgtSetInfo(TextId, "SideAng", dSideAng)
          SideAngValues.Add(New SideAngle(TextId, Index, dSideAng))
       Next
@@ -744,7 +746,7 @@ Public Class FreeContourManagerVM
             End If
          ElseIf bChangedStart Then
             ' non faccio nulla perche' gestito sopra
-            ' se apro percorso
+         ' se apro percorso
          ElseIf Not bNewIsClosed AndAlso bOldIsClosed AndAlso Index = NewAngleList.Count Then
             ' cancello il testo del lato rimosso
             nMovedIndex = OldAngleList.FindIndex(Function(x) AreSamePointApprox(x, NewAngleList(CurrIndex - 1)))
@@ -752,7 +754,7 @@ Public Class FreeContourManagerVM
             Dim NewIndex As Integer = (nPointsQty + nOffset) Mod nPointsQty
             EgtErase(SideAngValues(nOffset).nId)
             NewSideAngValues.RemoveAt(NewSideAngValues.Count - 1)
-            ' se chiudo percorso
+         ' se chiudo percorso
          ElseIf bNewIsClosed AndAlso Not bOldIsClosed AndAlso Index = OldAngleList.Count Then
             ' creo il testo del lato aggiunto
             Dim ptText As Point3d
@@ -761,20 +763,21 @@ Public Class FreeContourManagerVM
             ' aggiungo punto e incremento indice di confronto per riallineare successivo
             NewSideAngValues.Add(New SideAngle(TextId, NewSideAngValues.Count - 1, 0))
             '' percorso aperto
-            ' punti coincidono: verifico che i punti coincidano e non siano il centro del percorso simmetrico
+         ' punti coincidono: verifico che i punti coincidano e non siano il centro del percorso simmetrico
          ElseIf Not bNewIsClosed AndAlso nNewIndex <= NewAngleList.Count - 1 AndAlso nOldIndex <= OldAngleList.Count - 1 AndAlso AreSamePointApprox(NewAngleList(nNewIndex), OldAngleList(nOldIndex)) AndAlso
                 Not (Index = nPointsQty / 2 AndAlso AreSamePointApprox(NewAngleList(Index - 1), OldAngleList(nPointsQty - Index + 1))) Then
             If Index < nPointsQty AndAlso nOldIndex <= SideAngValues.Count - 1 Then
                NewSideAngValues.Add(New SideAngle(SideAngValues(nOldIndex).nId, NewSideAngValues.Count, SideAngValues(nOldIndex).dValue))
             End If
-            ' punti simmetrici: verifico se sono simmetrici o se coincidono ma i precedenti sono simmetrici
+         ' punti simmetrici: verifico se sono simmetrici o se coincidono ma i precedenti sono simmetrici
          ElseIf Not bNewIsClosed AndAlso Not bOldIsClosed AndAlso NewAngleList.Count = OldAngleList.Count AndAlso (AreSamePointApprox(NewAngleList(Index), OldAngleList(nPointsQty - Index)) OrElse
                 (AreSamePointApprox(NewAngleList(nNewIndex), OldAngleList(nOldIndex)) AndAlso AreSamePointApprox(NewAngleList(Index - 1), OldAngleList(nPointsQty - Index + 1)))) Then
             If Index < nPointsQty Then
-               EgtModifyText(SideAngValues(Index).nId, SideAngValues(nPointsQty - 1 - Index).dValue)
+               Dim sText As String = DoubleToString( SideAngValues(nPointsQty - 1 - Index).dValue, 2)
+               EgtModifyText(SideAngValues(Index).nId, sText)
                NewSideAngValues.Add(New SideAngle(SideAngValues(nPointsQty - 1 - Index).nId, NewSideAngValues.Count, SideAngValues(nPointsQty - 1 - Index).dValue))
             End If
-            ' punto spostato: verifico che non coincidano ma che i precedenti o i successivi coincidano
+         ' punto spostato: verifico che non coincidano ma che i precedenti o i successivi coincidano
          ElseIf Not bNewIsClosed AndAlso
                 ((Index = nPointsQty AndAlso Index <= OldAngleList.Count - 1 AndAlso Not AreSamePointApprox(NewAngleList(Index), OldAngleList(Index)) AndAlso AreSamePointApprox(NewAngleList(Index - 1), OldAngleList(Index - 1))) OrElse
                  (nOldIndex + 1 <= OldAngleList.Count - 1 AndAlso nNewIndex + 1 <= NewAngleList.Count - 1 AndAlso AreSamePointApprox(NewAngleList(nNewIndex + 1), OldAngleList(nOldIndex + 1)))) Then
@@ -797,20 +800,20 @@ Public Class FreeContourManagerVM
                NewSideAngValues.Add(New SideAngle(SideAngValues(Index).nId, NewSideAngValues.Count, SideAngValues(Index).dValue))
             End If
             '' percorso chiuso
-            ' punti coincidono:  verifico che i punti coincidano e non siano inizio, fine o centro del percorso simmetrico
+         ' punti coincidono:  verifico che i punti coincidano e non siano inizio, fine o centro del percorso simmetrico
          ElseIf bNewIsClosed AndAlso nNewIndex <= NewAngleList.Count - 1 AndAlso nOldIndex <= OldAngleList.Count - 1 AndAlso AreSamePointApprox(NewAngleList(nNewIndex), OldAngleList(nOldIndex)) AndAlso
                 Not ((Index = 0 AndAlso AreSamePointApprox(NewAngleList(Index + 1), OldAngleList(nPointsQty - 1))) OrElse
                      ((Index = nPointsQty / 2 OrElse Index = nPointsQty) AndAlso AreSamePointApprox(NewAngleList(Index - 1), OldAngleList(nPointsQty - Index + 1)))) Then
             If Index < nPointsQty AndAlso nOldIndex < SideAngValues.Count Then
                NewSideAngValues.Add(New SideAngle(SideAngValues(nOldIndex).nId, NewSideAngValues.Count, SideAngValues(nOldIndex).dValue))
             End If
-            ' punti simmetrici: verifico se sono simmetrici o se coincidono ma i precedenti sono simmetrici
+         ' punti simmetrici: verifico se sono simmetrici o se coincidono ma i precedenti sono simmetrici
          ElseIf bNewIsClosed AndAlso bOldIsClosed AndAlso (AreSamePointApprox(NewAngleList(Index), OldAngleList(nPointsQty - Index)) OrElse
                 (AreSamePointApprox(NewAngleList(nNewIndex), OldAngleList(nOldIndex)) AndAlso AreSamePointApprox(NewAngleList(Index - 1), OldAngleList(nPointsQty - Index + 1)))) Then
             If Index < nPointsQty Then
                NewSideAngValues.Add(New SideAngle(SideAngValues(nPointsQty - 1 - Index).nId, NewSideAngValues.Count, SideAngValues(nPointsQty - 1 - Index).dValue))
             End If
-            ' punto spostato: verifico che non coincidano ma che i precedenti o i successivi coincidano
+         ' punto spostato: verifico che non coincidano ma che i precedenti o i successivi coincidano
          ElseIf (nOldIndex + 1 <= OldAngleList.Count - 1 AndAlso nNewIndex + 1 <= NewAngleList.Count - 1 AndAlso AreSamePointApprox(NewAngleList(nNewIndex + 1), OldAngleList(nOldIndex + 1))) OrElse
                 (bNewIsClosed AndAlso nOldIndex + 1 = OldAngleList.Count AndAlso nNewIndex + 1 = NewAngleList.Count AndAlso AreSamePointApprox(NewAngleList(1), OldAngleList(1))) Then
             ' aggiorno posizione testo precedente
@@ -831,7 +834,7 @@ Public Class FreeContourManagerVM
                EgtMove(SideAngValues(nOldIndex).nId, vtDistance)
                NewSideAngValues.Add(New SideAngle(SideAngValues(nOldIndex).nId, NewSideAngValues.Count, SideAngValues(nOldIndex).dValue))
             End If
-            ' punto aggiunto: Verifico che il punto successivo coincida con il vecchio corrente o che sia stato aggiunto in fondo
+         ' punto aggiunto: Verifico che il punto successivo coincida con il vecchio corrente o che sia stato aggiunto in fondo
          ElseIf (nNewIndex + 1 <= NewAngleList.Count - 1 AndAlso AreSamePointApprox(NewAngleList(nNewIndex + 1), OldAngleList(nOldIndex))) OrElse
                 (nOldIndex = OldAngleList.Count AndAlso OldAngleList.Count < NewAngleList.Count) Then
             ' se non e' percorso aperto e primo punto
@@ -853,7 +856,7 @@ Public Class FreeContourManagerVM
             ' aggiungo punto e incremento indice di confronto per riallineare successivo
             NewSideAngValues.Insert(TextIndex, New SideAngle(TextId, TextIndex, 0))
             nOldIndex -= 1
-            ' punto tolto: verifico che il punto coincida con il vecchio successivo o che sia stato tolto in fondo
+         ' punto tolto: verifico che il punto coincida con il vecchio successivo o che sia stato tolto in fondo
          ElseIf (nOldIndex + 1 <= OldAngleList.Count - 1 AndAlso AreSamePointApprox(NewAngleList(nNewIndex), OldAngleList(nOldIndex + 1))) OrElse
              (nNewIndex = NewAngleList.Count AndAlso OldAngleList.Count > NewAngleList.Count) Then
             ' non aggiungo nulla, ma cancello testo
@@ -866,7 +869,7 @@ Public Class FreeContourManagerVM
             EgtAtParamPoint(m_nNewPathId, If(Index = 0, NewAngleList.Count, Index) - 0.5, ptNew)
             Dim vtDistance As Vector3d = ptNew - ptOld
             EgtMove(SideAngValues(If(Index = 0, OldAngleList.Count, Index) - 1).nId, vtDistance)
-            ' spostato o ruotato intero percorso
+         ' spostato o ruotato intero percorso
          Else
             ' aggiorno posizione testo successivo
             Dim ptOld As Point3d
@@ -895,9 +898,10 @@ Public Class FreeContourManagerVM
       If bResult Then
          ' scrivo info con nuova inclinazione
          Dim dAng As Double
-         StringToDouble(Map.refFreeContourInputVM.Text, dAng)
+         StringToDoubleAdv(Map.refFreeContourInputVM.Text, dAng, True)
          EgtSetInfo(m_nSelTextId, "SideAng", dAng)
-         EgtModifyText(m_nSelTextId, dAng & "°")
+         Dim sAng As String = DoubleToString( dAng, 2) & "°"
+         EgtModifyText(m_nSelTextId, sAng)
          Dim SideAngValue As SideAngle = SideAngValues.First(Function(x) x.nId = m_nSelTextId)
          SideAngValue.dValue = dAng
       End If
@@ -944,8 +948,9 @@ Public Class FreeContourManagerVM
          Map.refFreeContourInputVM.PrepareInputBox(EgtMsg(62007), EgtMsg(62008), "", False, False)
          Dim dSideAng As Double = 0
          EgtGetInfo(nId, "SideAng", dSideAng)
-         Map.refFreeContourInputVM.SetInputBoxText(dSideAng)
-         ' se sto aprendo percorso chiuso
+         Dim sSideAng As String = DoubleToString( dSideAng, 2)
+         Map.refFreeContourInputVM.SetInputBoxText(sSideAng)
+      ' se sto aprendo percorso chiuso
       ElseIf Map.refFreeContourManagerVM.bIsOpeningCurveCompo Then
          Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.OPENCOMPO)
          m_bIsOpeningCurveCompo = False
@@ -982,13 +987,21 @@ Public Class FreeContourManagerVM
    ''' Execute the Line2P.  This method is invoked by the Line2PCommand.
    ''' </summary>
    Public Sub Line2P(ByVal param As Object)
-      Dim nNewPathLayerId As Integer = EgtCreateGroup(nSelPartId)
+      ' cancello eventuale gruppo precedente
+      Dim nNewPathLayerId As Integer = EgtGetFirstNameInGroup(nSelPartId, "NewPathLayer")
+      If nNewPathLayerId <> GDB_ID.NULL Then
+         EgtEmptyGroup(nNewPathLayerId)
+      Else
+         nNewPathLayerId = EgtCreateGroup(nSelPartId)
+      End If
       EgtSetName(nNewPathLayerId, "NewPathLayer")
       EgtSetCurrPartLayer(nSelPartId, nNewPathLayerId)
-      InitCommand(True)
+      InitCommand(False)
       Map.refSceneHostVM.MainController.SetContinue()
       If Map.refSceneHostVM.MainController.ExecuteCommand(Controller.CMD.LINE2P) Then
          m_bIsCreatingPath = True
+      Else
+         EgtErase(nNewPathLayerId)
       End If
    End Sub
 

EgtBEAMWALL.ViewerOptimizer/InstrumentPanel/MyInstrumentPanelVM.vb

@@ -213,49 +213,17 @@ Public Class MyInstrumentPanelVM
                      For Each Param In ParamList.Where(Function(x) x.sName = ChangeParameterWndVM.SelParam.sName)
                         Select Case Param.nType
                            Case BTLParamType.DOUBLE_, BTLParamType.LENGTH
-                              If Param.dValue = ChangeParameterWndVM.SelParam.dActualValue Then
+                              If Math.Abs( Param.dValue - ChangeParameterWndVM.SelParam.dActualValue) < EPS_SMALL Then
                                  Param.UpdateParamValue(ChangeParameterWndVM.SelParam.dNewValue, "")
-                                 '' rinfresco valori parametri feature correntemente selezionata
-                                 'If Not IsNothing(Map.refProjectVM.BTLStructureVM.SelBTLPart) AndAlso
-                                 '   Not IsNothing(Map.refProjectVM.BTLStructureVM.SelBTLPart.SelBTLFeatureVM) AndAlso
-                                 '   Map.refProjectVM.BTLStructureVM.SelBTLPart.SelBTLFeatureVM Is Feature Then
-                                 '   Param.NotifyPropertyChanged("sValue")
-                                 'End If
                               End If
                            Case BTLParamType.STRING_
                               If Param.sValue = ChangeParameterWndVM.SelParam.sActualValue Then
                                  Param.UpdateParamValue(0, ChangeParameterWndVM.SelParam.sNewValue)
-                                 '' rinfresco valori parametri feature correntemente selezionata
-                                 'If Not IsNothing(Map.refProjectVM.BTLStructureVM.SelBTLPart) AndAlso
-                                 '   Not IsNothing(Map.refProjectVM.BTLStructureVM.SelBTLPart.SelBTLFeatureVM) AndAlso
-                                 '   Map.refProjectVM.BTLStructureVM.SelBTLPart.SelBTLFeatureVM.nPRC = ChangeParameterWndVM.SelPRC.nPRC AndAlso
-                                 '   Map.refProjectVM.BTLStructureVM.SelBTLPart.SelBTLFeatureVM.nSelGRP = ChangeParameterWndVM.SelPRC.nGRP Then
-                                 '   Param.NotifyPropertyChanged("sValue")
-                                 'End If
                               End If
                         End Select
                      Next
                   End If
                Next
-               '' faccio passare feature
-               'For Each Feature In Part.FeatureList
-               '   If Feature.nPRC = ChangeParameterWndVM.SelPRC.nPRC Then
-               '      For Each Param In Feature.PParamList
-               '         If Param.sName = ChangeParameterWndVM.SelParam.sName Then
-               '            Select Case Param.nType
-               '               Case BTLParamType.DOUBLE_, BTLParamType.LENGTH
-               '                  If Param.dValue = ChangeParameterWndVM.SelParam.dActualValue Then
-               '                     Param.dValue = ChangeParameterWndVM.SelParam.dValue
-               '                  End If
-               '               Case BTLParamType.STRING_
-               '                  If Param.sValue = ChangeParameterWndVM.SelParam.sActualValue Then
-               '                     Param.sValue = ChangeParameterWndVM.SelParam.sValue
-               '                  End If
-               '            End Select
-               '         End If
-               '      Next
-               '   End If
-               'Next
             Next
          End If
          LoadingWndHelper.CloseLoadingWnd(ActiveIds.CHANGEPARAM)

EgtBEAMWALL.ViewerOptimizer/ItemParamList/FeatureInPartInRawPartListV.xaml

@@ -83,10 +83,16 @@
             <!--Descrizione-->
             <DataGridTextColumn x:Key="colDESC" Binding="{Binding sDesc}">
                <DataGridTextColumn.Header>
-                  <TextBlock Text="{Binding Path=DataContext.Description_Msg,RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:FeatureInPartInRawPartListV}}}"/>
+                  <TextBlock Text="{Binding Path=DataContext.Description_Msg, RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:FeatureInPartInRawPartListV}}}"/>
                </DataGridTextColumn.Header>
             </DataGridTextColumn>
-         </DataGrid.Resources>
+         <!--Descrizione-->
+         <DataGridTextColumn x:Key="colPRIORITY" Binding="{Binding sPriority}">
+            <DataGridTextColumn.Header>
+               <TextBlock Text="{Binding Path=DataContext.Priority_Msg, RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:FeatureInPartInRawPartListV}}}"/>
+            </DataGridTextColumn.Header>
+         </DataGridTextColumn>
+      </DataGrid.Resources>
 
       </EgtBEAMWALLCORE:EgtDataGrid>
       <!--<TextBlock Grid.Row="1"

EgtBEAMWALL.ViewerOptimizer/ItemParamList/FeatureInPartInRawPartListVM.vb

@@ -11,6 +11,13 @@ Public Class FeatureInPartInRawPartListVM
       End Get
    End Property
 
+   Private m_colFeatureInPartInRawPart_Priority As EgtDataGridColumn
+   Public ReadOnly Property colFeatureInPartInRawPart_Priority As EgtDataGridColumn
+      Get
+         Return m_colFeatureInPartInRawPart_Priority
+      End Get
+   End Property
+
    Private m_FeatureInPartInRawPartColumns As New ObservableCollection(Of EgtDataGridColumn)
    Public Property FeatureInPartInRawPartColumns As ObservableCollection(Of EgtDataGridColumn)
       Get
@@ -35,6 +42,12 @@ Public Class FeatureInPartInRawPartListVM
       End Get
    End Property
 
+   Public ReadOnly Property Priority_Msg As String
+      Get
+         Return EgtMsg(61895)
+      End Get
+   End Property
+
 #End Region    ' Messages
 
    Sub New()
@@ -44,6 +57,13 @@ Public Class FeatureInPartInRawPartListVM
       GetPrivateProfileColumns(S_FEATUREINPARTINRAWPARTLIST, FeatureInPartInRawPartColumns)
       ' recupero riferimento a colonna Do
       m_colFeatureInPartInRawPart_Do = FeatureInPartInRawPartColumns.FirstOrDefault(Function(x) x.Name = COL_DO)
+      m_colFeatureInPartInRawPart_Priority = FeatureInPartInRawPartColumns.FirstOrDefault(Function(x) x.Name = COL_PRIORITY)
+   End Sub
+
+   Friend Sub UpdateColumns(nMachType As MachineType)
+      If Not IsNothing(m_colFeatureInPartInRawPart_Priority) Then
+         m_colFeatureInPartInRawPart_Priority.Visible = (nMachType = MachineType.WALL AndAlso CurrentMachine.bIsEnabledPriority)
+      End If
    End Sub
 
 End Class

EgtBEAMWALL.ViewerOptimizer/ItemParamList/RawPartListVM.vb

@@ -27,6 +27,13 @@ Public Class RawPartListVM
       End Get
    End Property
 
+   Private m_colRawPart_PosZ As EgtDataGridColumn
+   Public ReadOnly Property colRawPart_PosZ As EgtDataGridColumn
+      Get
+         Return m_colRawPart_PosZ
+      End Get
+   End Property
+
    Private m_RawPartColumns As New ObservableCollection(Of EgtDataGridColumn)
    Public Property RawPartColumns As ObservableCollection(Of EgtDataGridColumn)
       Get
@@ -120,6 +127,7 @@ Public Class RawPartListVM
       m_colRawPart_StartCut = RawPartColumns.FirstOrDefault(Function(x) x.Name = COL_STARTCUT)
       m_colRawPart_W = RawPartColumns.FirstOrDefault(Function(x) x.Name = COL_W)
       m_colRawPart_L = RawPartColumns.FirstOrDefault(Function(x) x.Name = COL_L)
+      m_colRawPart_PosZ = RawPartColumns.FirstOrDefault(Function(x) x.Name = COL_POSZ)
       ' aggiorno la visibilità delle colonne
       For Each col In RawPartColumns
          col.ColumnVisibility = If(col.Visible, Visibility.Visible, Visibility.Collapsed)