- aggiunta Action a ProdItem per gestire update Nome su DB

- rimosso ProdItem da  ViewerOptimizer

EgtBEAMWALL.Core/BTLModel/BTLPartM.vb

@@ -587,7 +587,7 @@ Public Class BTLPartM
    Public ReadOnly Property nINPROD As Integer
       Get
          Dim INPROD As Integer = 0
-         EgtDuploInRawCount(m_nPartId, INPROD)
+         EgtDuploCount(m_nPartId, INPROD)
          Return INPROD
       End Get
    End Property

EgtBEAMWALL.Core/Constants/ConstIni.vb

@@ -168,7 +168,4 @@ Public Module ConstIni
    Public Const K_EXTERNALFILEPATH As String = "ExternalFilePath"
    Public Const K_REMINDERFREQUENCY As String = "ReminderFrequency"
 
-   Public Const S_SPECIAL As String = "Special"
-   Public Const K_SPECIALENABLE As String = "SpecialEnable"
-
 End Module

EgtBEAMWALL.Core/EgtBEAMWALL.Core.vbproj

@@ -116,6 +116,7 @@
       <DependentUpon>NewOpenProjectFileDialogV.xaml</DependentUpon>
     </Compile>
     <Compile Include="NewOpenProjectFileDialog\NewOpenProjectFileDialogVM.vb" />
+    <Compile Include="ProjectFileVM\ProdItem.vb" />
     <Compile Include="Utility\DimensionsIniFile.vb" />
     <Compile Include="Utility\Enum.vb" />
     <Compile Include="MachGroupPanel\MyMachGroupPanelVM.vb" />

EgtBEAMWALL.Core/My Project/AssemblyInfo.vb

@@ -35,5 +35,5 @@ Imports System.Runtime.InteropServices
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.12.2")>
-<Assembly: AssemblyFileVersion("2.5.12.2")>
+<Assembly: AssemblyVersion("2.5.8.1")>
+<Assembly: AssemblyFileVersion("2.5.8.1")>

EgtBEAMWALL.Core/NewOpenProjectFileDialog/NewOpenProjectFileDialogVM.vb

@@ -779,94 +779,3 @@ Public MustInherit Class NewOpenProjectFileDialogVM
 
 End Class
 
-Public Class ProdItem
-   Inherits VMBase
-
-   Public Shared m_delIsModifiedSetUp As Action(Of Boolean)
-
-   Protected m_ProdFileVM As ProdFileVM
-   Public ReadOnly Property ProdFileVM As ProdFileVM
-      Get
-         Return m_ProdFileVM
-      End Get
-   End Property
-
-   Private m_ProjFileList As New List(Of ProjectFileVM)
-   Public ReadOnly Property ProjFileList As List(Of ProjectFileVM)
-      Get
-         Return m_ProjFileList
-      End Get
-   End Property
-
-   Public ReadOnly Property sProdId As String
-      Get
-         Return If(Not IsNothing(m_ProdFileVM), m_ProdFileVM.sProdId, "")
-      End Get
-   End Property
-
-   Public Overridable Property sName As String
-      Get
-         Return If(Not IsNothing(m_ProdFileVM), m_ProdFileVM.sName, "")
-      End Get
-      Set(value As String)
-         If Not IsNothing(m_ProdFileVM) Then
-            m_ProdFileVM.sName = value
-         End If
-      End Set
-   End Property
-
-   Public ReadOnly Property dtCreateDate As Date
-      Get
-         Return If(Not IsNothing(m_ProdFileVM), {m_ProdFileVM.dtCreateDate, m_ProjFileList.Min(Function(x) x.dtCreateDate)}.Min(), m_ProjFileList.Min(Function(x) x.dtCreateDate))
-      End Get
-   End Property
-   Public ReadOnly Property sCreateDate As String
-      Get
-         Return dtCreateDate.ToString()
-      End Get
-   End Property
-
-   Public ReadOnly Property sMachine As String
-      Get
-         If Not IsNothing(m_ProdFileVM) Then
-            Return m_ProdFileVM.sMachine
-         ElseIf Not IsNothing(m_ProjFileList(0)) Then
-            Return m_ProjFileList(0).sMachine
-         Else Return ""
-         End If
-      End Get
-   End Property
-
-   Public ReadOnly Property bIsArchived As Boolean
-      Get
-         If Not IsNothing(m_ProdFileVM) Then
-            Return m_ProdFileVM.bIsArchived
-         ElseIf Not IsNothing(m_ProjFileList(0)) Then
-            Return m_ProjFileList(0).bIsArchived
-         Else
-            Return True
-         End If
-      End Get
-   End Property
-
-   Public ReadOnly Property Archived_Visibility As Visibility
-      Get
-         Return If(bIsArchived, Visibility.Visible, Visibility.Collapsed)
-      End Get
-   End Property
-
-   Sub New(ProdFileVM As ProdFileVM, ProjFileVM As ProjFileVM)
-      m_ProdFileVM = ProdFileVM
-      m_ProjFileList.Add(ProjFileVM)
-   End Sub
-
-   Sub New(ProjFileVM As ProjFileVM)
-      m_ProjFileList = New List(Of ProjectFileVM)({ProjFileVM})
-   End Sub
-
-   Sub New(ProdFileVM As ProjectFileVM, ProjFileVMList As List(Of ProjectFileVM))
-      m_ProdFileVM = ProdFileVM
-      m_ProjFileList = ProjFileVMList
-   End Sub
-
-End Class

EgtBEAMWALL.Core/OpenProjectFileDialog/OpenProjectFileDialogVM.vb

@@ -42,6 +42,8 @@ Public MustInherit Class OpenProjectFileDialogVM
 
    Friend Event m_CloseWindow(bDialogResult As Boolean)
 
+   Protected m_GoToProd As Boolean = False
+
    Protected m_ProjectColumns As New ObservableCollection(Of EgtDataGridColumn)
    Public Property ProjectColumns As ObservableCollection(Of EgtDataGridColumn)
       Get
@@ -438,7 +440,7 @@ Public MustInherit Class OpenProjectFileDialogVM
 #Region "METHODS"
 
    Public MustOverride Function Init(ProjectType As ProjectType, Optional CurrProjectList As List(Of ProjectFileVM) = Nothing, Optional GoToProd As Boolean = False) As Boolean?
-   Public Overridable Sub RefreshProjectList(Optional GoToProd As Boolean = False)
+   Public Overridable Sub RefreshProjectList()
    End Sub
 
    Protected Sub LoadColumns(ProjectType As ProjectType)

EgtBEAMWALL.Core/ProjectFileVM/ProdFileM.vb

@@ -14,6 +14,13 @@ Public Class ProdFileM
       m_nProjIdList = value
    End Sub
 
+   Protected m_ProjMList As List(Of ProjFileM)
+   Public ReadOnly Property ProjMList As List(Of ProjFileM)
+      Get
+         Return m_ProjMList
+      End Get
+   End Property
+
    Protected m_sName As String
    Public Property sName As String
       Get
@@ -60,6 +67,24 @@ Public Class ProdFileM
       Return NewProjectFileM
    End Function
 
+   Public Shared Function CreateProdFileM(nProdId As Integer, nProjIdList As List(Of Integer), dtCreateProjDate As DateTime, sName As String, nType As BWType,
+                                          sMachine As String, sLockedBy As String, dtLock As DateTime, bIsActive As Boolean, bIsProduced As Boolean, bIsArchived As Boolean, ProjMList As List(Of ProjFileM)) As ProdFileM
+      Dim NewProjectFileM As New ProdFileM
+      NewProjectFileM.m_nProdId = nProdId
+      NewProjectFileM.m_nProjIdList = nProjIdList
+      NewProjectFileM.m_dtCreateDate = dtCreateProjDate
+      NewProjectFileM.m_sName = sName
+      NewProjectFileM.m_nType = nType
+      NewProjectFileM.m_sMachine = sMachine
+      NewProjectFileM.m_sLockedBy = sLockedBy
+      NewProjectFileM.m_dtLock = dtLock
+      NewProjectFileM.m_bIsActive = bIsActive
+      NewProjectFileM.m_bIsProduced = bIsProduced
+      NewProjectFileM.m_bIsArchived = bIsArchived
+      NewProjectFileM.m_ProjMList = ProjMList
+      Return NewProjectFileM
+   End Function
+
 #End Region    ' CONSTRUCTORS
 
 End Class

EgtBEAMWALL.Core/ProjectFileVM/ProdItem.vb

@@ -0,0 +1,119 @@
+
+Imports EgtWPFLib5
+Imports System.Windows
+
+Public Class ProdItem
+    Inherits VMBase
+
+   Public Shared m_delUpdateNameInDb As Action(Of Integer, String)
+   Public Shared m_delIsModifiedSetUp As Action(Of Boolean)
+
+   Protected m_ProdFileVM As ProdFileVM
+    Public ReadOnly Property ProdFileVM As ProdFileVM
+        Get
+            Return m_ProdFileVM
+        End Get
+    End Property
+
+    Private m_ProjFileList As New List(Of ProjectFileVM)
+    Public ReadOnly Property ProjFileList As List(Of ProjectFileVM)
+        Get
+            Return m_ProjFileList
+        End Get
+    End Property
+
+    Public ReadOnly Property sProdId As String
+        Get
+            Return If(Not IsNothing(m_ProdFileVM), m_ProdFileVM.sProdId, "")
+        End Get
+    End Property
+
+    Public Overridable Property sName As String
+        Get
+            Return If(Not IsNothing(m_ProdFileVM), m_ProdFileVM.sName, "")
+        End Get
+        Set(value As String)
+         If Not IsNothing(m_ProdFileVM) Then
+            m_delUpdateNameInDb(m_ProdFileVM.nProdId, value)
+            m_ProdFileVM.sName = value
+            m_delIsModifiedSetUp(False)
+         End If
+      End Set
+    End Property
+
+    Public ReadOnly Property dtCreateDate As Date
+        Get
+            Return If(Not IsNothing(m_ProdFileVM), {m_ProdFileVM.dtCreateDate, m_ProjFileList.Min(Function(x) x.dtCreateDate)}.Min(), m_ProjFileList.Min(Function(x) x.dtCreateDate))
+        End Get
+    End Property
+    Public ReadOnly Property sCreateDate As String
+        Get
+            Return dtCreateDate.ToString()
+        End Get
+    End Property
+
+    Public ReadOnly Property sMachine As String
+        Get
+            If Not IsNothing(m_ProdFileVM) Then
+                Return m_ProdFileVM.sMachine
+            ElseIf Not IsNothing(m_ProjFileList(0)) Then
+                Return m_ProjFileList(0).sMachine
+            Else Return ""
+            End If
+        End Get
+    End Property
+
+    Public ReadOnly Property bIsArchived As Boolean
+        Get
+            If Not IsNothing(m_ProdFileVM) Then
+                Return m_ProdFileVM.bIsArchived
+            ElseIf Not IsNothing(m_ProjFileList(0)) Then
+                Return m_ProjFileList(0).bIsArchived
+            Else
+                Return True
+            End If
+        End Get
+    End Property
+
+    Public ReadOnly Property Archived_Visibility As Visibility
+        Get
+            Return If(bIsArchived, Visibility.Visible, Visibility.Collapsed)
+        End Get
+    End Property
+
+    Sub New(ProdFileVM As ProdFileVM, ProjFileVM As ProjFileVM)
+        m_ProdFileVM = ProdFileVM
+        m_ProjFileList.Add(ProjFileVM)
+    End Sub
+
+    Sub New(ProjFileVM As ProjFileVM)
+        m_ProjFileList = New List(Of ProjectFileVM)({ProjFileVM})
+    End Sub
+
+    Sub New(ProdFileVM As ProjectFileVM, ProjFileVMList As List(Of ProjectFileVM))
+        m_ProdFileVM = ProdFileVM
+        m_ProjFileList = ProjFileVMList
+    End Sub
+
+
+   Public Shared Function CreateProdItem(nProdId As Integer, nProjIdList As List(Of Integer), dtCreateProjDate As DateTime, sName As String, nType As BWType,
+                                           sMachine As String, sLockedBy As String, dtLock As DateTime, bIsActive As Boolean, bIsProduced As Boolean, bIsArchived As Boolean, ProjMList As List(Of ProjFileM)) As ProdItem
+
+
+      Dim NewProdFileM = ProdFileM.CreateProdFileM(nProdId, nProjIdList, dtCreateProjDate, sName, nType, sMachine, sLockedBy, dtLock, bIsActive, bIsProduced, bIsArchived)
+      Dim NewProdFileVM = New ProdFileVM(NewProdFileM)
+      Dim NewProjFileVM As IEnumerable(Of ProjectFileVM)
+      NewProjFileVM = ProjMList.Select(Of ProjFileVM)(Function(j) New ProjFileVM(j)).ToList
+      Dim NewProdItem = New ProdItem(NewProdFileVM, NewProjFileVM.ToList)
+
+      Return NewProdItem
+   End Function
+
+   Public Shared Function CreateProdItem(ProjFileM As ProjFileM) As ProdItem
+
+      Dim NewProdItem = New ProdItem(New ProjFileVM(ProjFileM))
+
+      Return NewProdItem
+   End Function
+
+End Class

EgtBEAMWALL.DataLayer/Controllers/ProdController.cs

@@ -2,6 +2,7 @@
 using NLog;
 using System;
 using System.Collections.Generic;
+using System.Data.Entity;
 using System.Linq;
 using static EgtBEAMWALL.Core.ConstBeam;
 
@@ -208,11 +209,11 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// <summary>
         /// Elenco prod
         /// </summary>
-        /// <param name="numRecord">Num max record da recuperare</param>
+        /// <param name="NumRecord">Num max record da recuperare</param>
         /// <param name="OnlyActive">Solo con ALMENO 1 PROJ attivo (senza cancellazione logica)</param>
         /// <param name="ShowArchived">Se true: mostra anche archiviati (default li nasconde)</param>
         /// <returns></returns>
-        public List<Core.ProdFileM> GetLastDesc(int numRecord, bool OnlyActive, bool ShowArchived = false)
+        public List<Core.ProdFileM> GetLastDesc(int NumRecord, bool OnlyActive, bool ShowArchived = false)
         {
             List<Core.ProdFileM> result = new List<Core.ProdFileM>();
             //List<ProdModel> dbResult = GetLastDbModelDesc(numRecord);
@@ -220,9 +221,9 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
                 // se numRecord = 0 --> passo tutti
-                if (numRecord == 0)
+                if (NumRecord == 0)
                 {
-                    numRecord = localDbCtx.ProdList.Count();
+                    NumRecord = localDbCtx.ProdList.Count();
                 }
                 // retrieve
                 dbResult = localDbCtx
@@ -235,7 +236,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                         (p, e) => p)
                     .Distinct()
                     .OrderByDescending(x => x.ProdId)
-                    .Take(numRecord)
+                    .Take(NumRecord)
                     .ToList();
             }
 
@@ -247,13 +248,13 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// <summary>
         /// Elenco prod
         /// </summary>
-        /// <param name="dtStart">Inizio periodo estrazione</param>
-        /// <param name="dtEnd">Fine periodo estrazione</param>
-        /// <param name="numRecord">Num max record da recuperare</param>
+        /// <param name="DtStart">Inizio periodo estrazione</param>
+        /// <param name="DtEnd">Fine periodo estrazione</param>
+        /// <param name="NumRecord">Num max record da recuperare</param>
         /// <param name="OnlyActive">Solo con ALMENO 1 PROJ attivo (senza cancellazione logica)</param>
         /// <param name="ShowArchived">Se true: mostra anche archiviati (default li nasconde)</param>
         /// <returns></returns>
-        public List<Core.ProdFileM> GetLastDesc(DateTime dtStart, DateTime dtEnd, int numRecord, bool OnlyActive, bool ShowArchived = false)
+        public List<Core.ProdFileM> GetLastDesc(DateTime DtStart, DateTime DtEnd, int NumRecord, bool OnlyActive, bool ShowArchived = false)
         {
             List<Core.ProdFileM> result = new List<Core.ProdFileM>();
             //List<ProdModel> dbResult = GetLastDbModelDesc(numRecord);
@@ -261,14 +262,14 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
             {
                 // se numRecord = 0 --> passo tutti
-                if (numRecord == 0)
+                if (NumRecord == 0)
                 {
-                    numRecord = localDbCtx.ProdList.Count();
+                    NumRecord = localDbCtx.ProdList.Count();
                 }
                 // retrieve
                 dbResult = localDbCtx
                     .ProdList
-                    .Where(x => x.DtCreated >= dtStart && x.DtCreated <= dtEnd && (!x.IsArchived || ShowArchived))
+                    .Where(x => x.DtCreated >= DtStart && x.DtCreated <= DtEnd && (!x.IsArchived || ShowArchived))
                     // condizione join sui PROJ
                     .Join(localDbCtx.ProjList.Where(x => x.IsActive || !OnlyActive),
                         p => p.ProdDbId,
@@ -276,7 +277,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                         (p, e) => p)
                     .Distinct()
                     .OrderByDescending(x => x.ProdId)
-                    .Take(numRecord)
+                    .Take(NumRecord)
                     .ToList();
             }
 
@@ -285,6 +286,183 @@ namespace EgtBEAMWALL.DataLayer.Controllers
             return result;
         }
 
+        /// <summary>
+        /// Elenco prod
+        /// </summary>
+        /// <param name="NumRecord">Num max record da recuperare</param>
+        /// <param name="OnlyActive">Solo con ALMENO 1 PROJ attivo (senza cancellazione logica)</param>
+        /// <param name="ShowArchived">Se true: mostra anche archiviati (default li nasconde)</param>
+        /// <returns></returns>
+        public List<Core.ProdItem> GetLastDescFull(int NumRecord, bool OnlyActive, bool ShowArchived = false)
+        {
+            List<Core.ProdItem> result = new List<Core.ProdItem>();
+            // elenco prod completi
+            List<ProdModel> dbResultProd = new List<ProdModel>();
+            // elenco proj "orfani"
+            List<ProjModel> dbResultProj = new List<ProjModel>();
+            using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
+            {
+                // se numRecord = 0 --> passo tutti
+                if (NumRecord == 0)
+                {
+                    NumRecord = localDbCtx.ProdList.Count();
+                }
+                // recupero PROD + proj relativi
+                dbResultProd = localDbCtx
+                            .ProdList
+                            .Where(x => (!x.IsArchived || ShowArchived))
+                            //.Include(j => j.)
+                            // condizione join sui PROJ
+                            .Join(localDbCtx.ProjList.Where(x => x.IsActive || !OnlyActive),
+                                p => p.ProdDbId,
+                                e => e.ProdDbId,
+                                (p, e) => p)
+                            .Distinct()
+                            .Include(j => j.ProjListNav)
+                            .OrderByDescending(x => x.ProdId)
+                            .Take(NumRecord)
+                            .ToList();
+
+                // recupero i proj "orfani"
+                dbResultProj = localDbCtx
+                            .ProjList
+                            .Where(x => (x.IsActive || !OnlyActive) && x.Prod == null)
+                            .OrderByDescending(x => x.ProjId)
+                            .Take(NumRecord)
+                            .ToList();
+            }
+
+            // conversione
+            result = dbResultProd.Select(x => coreItemConv(x)).ToList();
+            var resProj = dbResultProj.Select(x => coreItemConv(x)).ToList();
+            // sommo i risultati
+            result.AddRange(resProj);
+            return result;
+        }
+
+        /// <summary>
+        /// Elenco prod
+        /// </summary>
+        /// <param name="DtStart">Inizio periodo estrazione</param>
+        /// <param name="DtEnd">Fine periodo estrazione</param>
+        /// <param name="NumRecord">Num max record da recuperare</param>
+        /// <param name="OnlyActive">Solo con ALMENO 1 PROJ attivo (senza cancellazione logica)</param>
+        /// <param name="ShowArchived">Se true: mostra anche archiviati (default li nasconde)</param>
+        /// <returns></returns>
+        public List<Core.ProdItem> GetLastDescFull(DateTime DtStart, DateTime DtEnd, int NumRecord, bool OnlyActive, bool ShowArchived = false)
+        {
+            List<Core.ProdItem> result = new List<Core.ProdItem>();
+            // elenco prod completi
+            List<ProdModel> dbResultProd = new List<ProdModel>();
+            // elenco proj "orfani"
+            List<ProjModel> dbResultProj = new List<ProjModel>();
+            using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
+            {
+                // se numRecord = 0 --> passo tutti
+                if (NumRecord == 0)
+                {
+                    NumRecord = localDbCtx.ProdList.Count();
+                }
+                // retrieve
+                dbResultProd = localDbCtx
+                            .ProdList
+                            .Where(x => x.DtCreated >= DtStart && x.DtCreated <= DtEnd && (!x.IsArchived || ShowArchived))
+                            // condizione join sui PROJ
+                            .Join(localDbCtx.ProjList.Where(x => x.IsActive || !OnlyActive),
+                                p => p.ProdDbId,
+                                e => e.ProdDbId,
+                                (p, e) => p)
+                            .Distinct()
+                            .Include(j => j.ProjListNav)
+                            .OrderByDescending(x => x.ProdId)
+                            .Take(NumRecord)
+                            .ToList();
+
+                // recupero i proj "orfani"
+                dbResultProj = localDbCtx
+                            .ProjList
+                            .Where(x => (x.IsActive || !OnlyActive) && x.Prod == null && (x.DtCreated >= DtStart && x.DtCreated <= DtEnd))
+                            .OrderByDescending(x => x.ProjId)
+                            .Take(NumRecord)
+                            .ToList();
+            }
+            // conversione
+            result = dbResultProd.Select(x => coreItemConv(x)).ToList();
+            var resProj = dbResultProj.Select(x => coreItemConv(x)).ToList();
+            // sommo i risultati
+            result.AddRange(resProj);
+            return result;
+        }
+
+        /// <summary>
+        /// Elenco prod
+        /// </summary>
+        /// <param name="DtStart">Inizio periodo estrazione</param>
+        /// <param name="DtEnd">Fine periodo estrazione</param>
+        /// <param name="DtIsCreation">Ture: usa data creazione / False: usa data export</param>
+        /// <param name="NumRecord">Num max record da recuperare</param>
+        /// <param name="OnlyActive">Solo con ALMENO 1 PROJ attivo (senza cancellazione logica)</param>
+        /// <param name="Machine">Nome Macchina (default vuoto = non usato)</param>
+        /// <param name="BtlFileName">Nome file BTL  (default vuoto = non usato)</param>
+        /// <param name="ListName">Nome List  (default vuoto = non usato)</param>
+        /// <param name="ShowArchived">Se true: mostra anche archiviati (default li nasconde)</param>
+        /// <returns></returns>
+        public List<Core.ProdItem> GetLastDescFull(DateTime DtStart, DateTime DtEnd, bool DtIsCreation, int NumRecord, bool OnlyActive, string Machine = "", string BtlFileName = "", string ListName = "", bool ShowArchived = false)
+        {
+            List<Core.ProdItem> result = new List<Core.ProdItem>();
+            List<ProdModel> dbResultProd = new List<ProdModel>();
+            // elenco proj "orfani"
+            List<ProjModel> dbResultProj = new List<ProjModel>();
+            using (DatabaseContext localDbCtx = new DatabaseContext(DbConfig.CONNECTION_STRING))
+            {
+                // se numRecord = 0 --> passo tutti
+                if (NumRecord == 0)
+                {
+                    NumRecord = localDbCtx.ProdList.Count();
+                }
+                // retrieve
+                dbResultProd = localDbCtx
+                            .ProdList
+                            .Where(x =>  (!x.IsArchived || ShowArchived))
+                            // condizione join sui PROJ
+                            .Join(localDbCtx.ProjList.Where(x => 
+                                    (x.IsActive || !OnlyActive)
+                                    && (string.IsNullOrEmpty(Machine) || x.Machine.ToLower().Contains(Machine.ToLower()))
+                                    && (string.IsNullOrEmpty(BtlFileName) || x.BTLFileName.ToLower().Contains( BtlFileName.ToLower()))
+                                    && (string.IsNullOrEmpty(ListName) || x.ListName.ToLower().Contains(ListName.ToLower()))
+                                    && ((DtIsCreation && (x.DtCreated >= DtStart && x.DtCreated <= DtEnd)) || (!DtIsCreation && (x.DtExported >= DtStart && x.DtExported <= DtEnd))) 
+                                    ),
+                                p => p.ProdDbId,
+                                e => e.ProdDbId,
+                                (p, e) => p)
+                            .Distinct()
+                            .Include(j => j.ProjListNav)
+                            .OrderByDescending(x => x.ProdId)
+                            .Take(NumRecord)
+                            .ToList();
+
+                // recupero i proj "orfani"
+                dbResultProj = localDbCtx
+                            .ProjList
+                            .Where(x => 
+                            (x.IsActive || !OnlyActive) 
+                            && x.Prod == null
+                            && (string.IsNullOrEmpty(Machine) || x.Machine.ToLower().Contains(Machine.ToLower()))
+                            && (string.IsNullOrEmpty(BtlFileName) || x.BTLFileName.ToLower().Contains(BtlFileName.ToLower()))
+                            && (string.IsNullOrEmpty(ListName) || x.ListName.ToLower().Contains(ListName.ToLower()))
+                            && ((DtIsCreation && (x.DtCreated >= DtStart && x.DtCreated <= DtEnd)) || (!DtIsCreation && (x.DtExported >= DtStart && x.DtExported <= DtEnd))))
+                            .OrderByDescending(x => x.ProjId)
+                            .Take(NumRecord)
+                            .ToList();
+            }
+            // conversione
+            result = dbResultProd.Select(x => coreItemConv(x)).ToList();
+            var resProj = dbResultProj.Select(x => coreItemConv(x)).ToList();
+            // sommo i risultati
+            result.AddRange(resProj);
+            return result;
+        }
+
         /// <summary>
         /// Fornisce nuovo indice VUOTO da usare (allocando sul DB)
         /// </summary>
@@ -910,6 +1088,29 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         protected Core.ProdFileM coreConv(ProdModel currProd)
         {
             Core.ProdFileM answ = Core.ProdFileM.CreateProdFileM(currProd.ProdId, ProjIdByProd(currProd.ProdId), currProd.DtCreated, currProd.Description, currProd.PType, currProd.Machine, currProd.LockedBy, currProd.LockDate, currProd.IsActive, currProd.IsProduced, currProd.IsArchived);
+            //Core.ProdFileM answ = Core.ProdFileM.CreateProdFileM(currProd.ProdId, ProjIdByProd(currProd.ProdId), currProd.DtCreated, currProd.Description, currProd.PType, currProd.Machine, currProd.LockedBy, currProd.LockDate, currProd.IsActive, currProd.IsProduced, currProd.IsArchived, currProd.ProjListNav.Select(j => Core.ProjFileM.CreateProjFileM(j.ProjId, currProd.ProdId, j.DtCreated, j.DtExported, j.ListName, j.BTLFileName, j.ProjDescription, j.IsNew, j.Locked, j.PType, j.Machine, j.IsActive, j.IsActive)).ToList());
+            return answ;
+        }
+
+        /// <summary>
+        /// Helper conversione modelli verso prodItem
+        /// </summary>
+        /// <param name="currProd"></param>
+        /// <returns></returns>
+        protected Core.ProdItem coreItemConv(ProdModel currProd)
+        {
+            Core.ProdItem answ = Core.ProdItem.CreateProdItem(currProd.ProdId, ProjIdByProd(currProd.ProdId), currProd.DtCreated, currProd.Description, currProd.PType, currProd.Machine, currProd.LockedBy, currProd.LockDate, currProd.IsActive, currProd.IsProduced, currProd.IsArchived, currProd.ProjListNav.Select(j => Core.ProjFileM.CreateProjFileM(j.ProjId, currProd.ProdId, j.DtCreated, j.DtExported, j.ListName, j.BTLFileName, j.ProjDescription, j.IsNew, j.Locked, j.PType, j.Machine, j.IsActive, j.IsActive)).ToList());
+            return answ;
+        }
+
+        /// <summary>
+        /// Helper conversione modelli verso prodItem da singolo proj
+        /// </summary>
+        /// <param name="currProd"></param>
+        /// <returns></returns>
+        protected Core.ProdItem coreItemConv(ProjModel currProj)
+        {
+            Core.ProdItem answ = Core.ProdItem.CreateProdItem(Core.ProjFileM.CreateProjFileM(currProj.ProjId, 0, currProj.DtCreated, currProj.DtExported, currProj.ListName, currProj.BTLFileName, currProj.ProjDescription, currProj.IsNew, currProj.Locked, currProj.PType, currProj.Machine, currProj.IsActive, currProj.IsActive));
             return answ;
         }
 

EgtBEAMWALL.DataLayer/Controllers/ProjController.cs

@@ -33,6 +33,8 @@ namespace EgtBEAMWALL.DataLayer.Controllers
                 var dbResult = localDbCtx
                        .ProjList
                        .Where(x => x.BTLFileName == BTLFileName)
+                       //valutare se usare solo attivi...
+                       //.Where(x => x.BTLFileName == BTLFileName && x.IsActive == true)
                        .FirstOrDefault();
 
                 //se avesse trovato-- > riporto id...
@@ -581,7 +583,7 @@ namespace EgtBEAMWALL.DataLayer.Controllers
         /// Update record su DB x elenco BTLParts
         /// </summary>
         /// <param name="ProjId"></param>
-        /// <param name="newBTLFileName"></param>
+        /// <param name="BtlPartList"></param>
         /// <returns></returns>
         public ProjModel UpdateBtlParts(int ProjId, List<Core.BTLPartM> BtlPartList)
         {

EgtBEAMWALL.DataLayer/DatabaseModels/ProdModel.cs

@@ -19,6 +19,11 @@ namespace EgtBEAMWALL.DataLayer.DatabaseModels
     {
         #region Public Properties
 
+        public ProdModel()
+        {
+            ProjListNav = new HashSet<ProjModel>();
+        }
+
         /// <summary>
         /// Chiave univoca DB
         /// </summary>
@@ -98,6 +103,11 @@ namespace EgtBEAMWALL.DataLayer.DatabaseModels
         [Column("IsArchived")]
         public bool IsArchived { get; set; } = false;
 
+        /// <summary>
+        /// Collezione oggetti Proj associati (almeno 1 by design)
+        /// </summary>
+        public virtual ICollection<ProjModel> ProjListNav { get; set; }
+
         #endregion Public Properties
     }
 }

EgtBEAMWALL.DataLayer/Properties/AssemblyInfo.cs

@@ -32,5 +32,5 @@ using System.Runtime.InteropServices;
 // You can specify all the values or you can default the Build and Revision Numbers
 // by using the '*' as shown below:
 // [assembly: AssemblyVersion("1.0.*")]
-[assembly: AssemblyVersion("2.5.12.2")]
-[assembly: AssemblyFileVersion("2.5.12.2")]
+[assembly: AssemblyVersion("2.5.8.1")]
+[assembly: AssemblyFileVersion("2.5.8.1")]

EgtBEAMWALL.Supervisor/ItemParamList/RawPartListV.xaml.vb

@@ -219,7 +219,6 @@ Friend Class MyComparer
                Return 0
             End If
       End Select
-      Return 0
    End Function
 
 End Class

EgtBEAMWALL.Supervisor/LeftPanel/LeftPanelVM.vb

@@ -437,10 +437,6 @@ Public Class LeftPanelVM
                                                          New OPState("Reset", OPStates.End),
                                                          New OPState("Unspecified", OPStates.Unspecified)
          }
-         Case Else
-            m_OPStateList = New List(Of OPState) From {
-                                                         New OPState("Unspecified", OPStates.Unspecified)
-         }
       End Select
       ' seleziono in partenza unspecified
       Dim UnspecifiedState As OPState = m_OPStateList.FirstOrDefault(Function(x) x.Id = OPStates.Unspecified)

EgtBEAMWALL.Supervisor/MachGroupPanel/MyMachGroupVM.vb

@@ -317,7 +317,6 @@ Public Class MyMachGroupVM
          ' segno pezzo da produrre
          MachGroup.m_bToBeProduced = True
          MachGroup.NotifyPropertyChanged(NameOf(MachGroup.Production_Background))
-         Map.refSupervisorMachGroupPanelVM.MachGroupVMList_View.Refresh()
 
          ' sposto MachGroup in lista come ultimo dei pronti da produrre
          Dim OldIndex As Integer = Map.refProjectVM.SupervisorMachGroupPanelVM.MachGroupVMList.IndexOf(MachGroup)

EgtBEAMWALL.Supervisor/MainWindow/MainWindowM.vb

@@ -248,8 +248,8 @@ Public Class MainWindowM
          EgtSetLockId( sLockId)
       End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2512, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5327, 2512, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2508, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(5327, 2508, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & SUPGENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())

EgtBEAMWALL.Supervisor/My Project/AssemblyInfo.vb

@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.12.2")>
-<Assembly: AssemblyFileVersion("2.5.12.2")>
+<Assembly: AssemblyVersion("2.5.8.1")>
+<Assembly: AssemblyFileVersion("2.5.8.1")>

EgtBEAMWALL.Supervisor/OpenProjectFileDialog/OpenProjectFileDialogVM.vb

@@ -11,13 +11,14 @@ Public Class OpenProjectFileDialogVM
 
    Public Overrides Function Init(ProjectType As ProjectType, Optional CurrProjectList As List(Of ProjectFileVM) = Nothing, Optional GoToProd As Boolean = False) As Boolean?
       m_ProjectType = ProjectType
+      m_GoToProd = GoToProd
       ' carico colonne
       LoadColumns(m_ProjectType)
       NotifyPropertyChanged(NameOf(FilterTypeList))
       m_SelFilterType = m_FilterTypeList(0)
       ' carico lista progetti
       If IsNothing(CurrProjectList) OrElse CurrProjectList.Count = 0 Then
-         RefreshProjectList(GoToProd)
+         RefreshProjectList()
       Else
          m_ProjectList = New ObservableCollection(Of ProjectFileVM)(CurrProjectList)
          NotifyPropertyChanged(NameOf(ProjectList))
@@ -26,7 +27,7 @@ Public Class OpenProjectFileDialogVM
       m_ProjectList_View.Filter = AddressOf ProjectFilter
    End Function
 
-   Public Overrides Sub RefreshProjectList(Optional GoToProd As Boolean = False)
+   Public Overrides Sub RefreshProjectList()
       m_ProjectList.Clear()
       ' calcolo periodo e righe
       Dim dtStart As DateTime

EgtBEAMWALL.ViewerOptimizer/CALCPanel/CalcPanelV.xaml

@@ -47,7 +47,6 @@
            Visibility="{Binding ChooseMachineBtn_Visibility}">
       <Image Source="/Resources/CALCPanel/ChooseMachine.png" Stretch="Uniform"/>
    </Button>
-
    <Grid Margin="0,0,5,0" Visibility="{Binding ChooseMachine_Visibility}">
         <Grid.ColumnDefinitions>
             <ColumnDefinition Width="Auto"/>

EgtBEAMWALL.ViewerOptimizer/EgtBEAMWALL.ViewerOptimizer.vbproj

@@ -338,10 +338,6 @@
       <DependentUpon>SetUpV.xaml</DependentUpon>
     </Compile>
     <Compile Include="SetUp\SetUpVM.vb" />
-    <Compile Include="SpecialPanel\SpecialPanelV.xaml.vb">
-      <DependentUpon>SpecialPanelV.xaml</DependentUpon>
-    </Compile>
-    <Compile Include="SpecialPanel\SpecialPanelVM.vb" />
     <Compile Include="StatisticsTimePanel\StatisticsTimePanelV.xaml.vb">
       <DependentUpon>StatisticsTimePanelV.xaml</DependentUpon>
     </Compile>
@@ -548,10 +544,6 @@
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>
     </Page>
-    <Page Include="SpecialPanel\SpecialPanelV.xaml">
-      <SubType>Designer</SubType>
-      <Generator>XamlIntelliSenseFileGenerator</Generator>
-    </Page>
     <Page Include="StatisticsTimePanel\StatisticsTimePanelV.xaml">
       <Generator>MSBuild:Compile</Generator>
       <SubType>Designer</SubType>

EgtBEAMWALL.ViewerOptimizer/MainWindow/MainWindowM.vb

@@ -157,13 +157,6 @@ Public Class MainWindowM
       End Get
    End Property
 
-   Private m_bSpecialPanel As Boolean = False
-   Friend ReadOnly Property bSpecialPanel As Boolean
-      Get
-         Return m_bSpecialPanel
-      End Get
-   End Property
-
 #End Region    ' FIELDS
 
 #Region "CONSTRUCTOR"
@@ -242,8 +235,8 @@ Public Class MainWindowM
          EgtSetLockId( sLockId)
       End If
       ' Recupero livello e opzioni della chiave
-      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2512, 1, m_nKeyLevel) And
-                            EgtGetKeyOptions(5327, 2512, 1, m_nKeyOptions)
+      Dim bKey As Boolean = EgtGetKeyLevel(5327, 2508, 1, m_nKeyLevel) And
+                            EgtGetKeyOptions(5327, 2508, 1, m_nKeyOptions)
       ' Inizializzazione generale di EgtInterface
       m_nDebug = GetMainPrivateProfileInt(S_GENERAL, K_DEBUG, 0)
       m_sLogFile = m_sTempDir & "\" & VWOPTGENLOG_FILE_NAME.Replace("#", m_nInstance.ToString())
@@ -285,8 +278,6 @@ Public Class MainWindowM
       EgtSetUiUnits(GetMainPrivateProfileInt(S_SCENE, K_MMUNITS, 1) <> 0)
       ' Leggo e imposto livello utilizzatore
       m_nUserLevel = Math.Min(m_nKeyLevel, GetMainPrivateProfileInt(S_GENERAL, K_USERLEVEL, 1))
-      ' Recupero flag SpecialPanel
-      m_bSpecialPanel = GetMainPrivateProfileInt(S_SPECIAL, K_SPECIALENABLE, 0) = 1
       ' Imposto dir font Nfe e font default
       Dim sNfeDir As String = String.Empty
       GetMainPrivateProfileString(S_GEOMDB, K_NFEFONTDIR, "", sNfeDir)

EgtBEAMWALL.ViewerOptimizer/My Project/AssemblyInfo.vb

@@ -70,5 +70,5 @@ Imports System.Windows
 ' by using the '*' as shown below:
 ' <Assembly: AssemblyVersion("1.0.*")>
 
-<Assembly: AssemblyVersion("2.5.12.2")>
-<Assembly: AssemblyFileVersion("2.5.12.2")>
+<Assembly: AssemblyVersion("2.5.8.1")>
+<Assembly: AssemblyFileVersion("2.5.8.1")>

EgtBEAMWALL.ViewerOptimizer/NewOpenProjectFileDialog/NewOpenProjectFileDialogVM.vb

@@ -22,6 +22,7 @@ Public Class NewOpenProjectFileDialogVM
 
    Public Overrides Function Init(ProjectType As ProjectType, Optional CurrProjectList As List(Of ProjectFileVM) = Nothing, Optional GoToProd As Boolean = False) As Boolean?
       m_ProjectType = ProjectType
+      ProdItem.m_delUpdateNameInDb = AddressOf DbControllers.m_ProdController.UpdateDescription
 
       NotifyPropertyChanged(NameOf(FilterTypeList))
       m_SelFilterType = m_FilterTypeList(0)
@@ -250,33 +251,3 @@ Public Class NewOpenProjectFileDialogVM
 #End Region    ' METHODS
 
 End Class
-
-Public Class ProdItem
-   Inherits Core.ProdItem
-
-   Public Overrides Property sName As String
-      Get
-         Return If(Not IsNothing(m_ProdFileVM), m_ProdFileVM.sName, "")
-      End Get
-      Set(value As String)
-         If Not IsNothing(m_ProdFileVM) Then
-            DbControllers.m_ProdController.UpdateDescription(m_ProdFileVM.nProdId, value)
-            m_ProdFileVM.sName = value
-            m_delIsModifiedSetUp(False)
-         End If
-      End Set
-   End Property
-
-   Sub New(ProdFileVM As ProdFileVM, ProjFileVM As ProjFileVM)
-      MyBase.New(ProdFileVM, ProjFileVM)
-   End Sub
-
-   Sub New(ProjFileVM As ProjFileVM)
-      MyBase.New(ProjFileVM)
-   End Sub
-
-   Sub New(ProdFileVM As ProjectFileVM, ProjFileVMList As List(Of ProjectFileVM))
-      MyBase.New(ProdFileVM, ProjFileVMList)
-   End Sub
-
-End Class

EgtBEAMWALL.ViewerOptimizer/OpenProjectFileDialog/OpenProjectFileDialogVM.vb

@@ -12,6 +12,7 @@ Public Class OpenProjectFileDialogVM
 
    Public Overrides Function Init(ProjectType As ProjectType, Optional CurrProjectList As List(Of ProjectFileVM) = Nothing, Optional GoToProd As Boolean = False) As Boolean?
       m_ProjectType = ProjectType
+      m_GoToProd = GoToProd
       ' carico colonne
       LoadColumns(ProjectType)
       NotifyPropertyChanged(NameOf(FilterTypeList))
@@ -19,7 +20,7 @@ Public Class OpenProjectFileDialogVM
       ' carico lista progetti
       If IsNothing(CurrProjectList) OrElse CurrProjectList.Count = 0 Then
          SetFixedProjectList(False)
-         RefreshProjectList(GoToProd)
+         RefreshProjectList()
       Else
          SetFixedProjectList(True)
          m_ProjectList = New ObservableCollection(Of ProjectFileVM)(CurrProjectList)
@@ -29,7 +30,7 @@ Public Class OpenProjectFileDialogVM
       m_ProjectList_View.Filter = AddressOf ProjectFilter
    End Function
 
-   Public Overrides Sub RefreshProjectList(Optional GoToProd As Boolean = False)
+   Public Overrides Sub RefreshProjectList()
       m_ProjectList.Clear()
       ' calcolo periodo e righe
       Dim dtStart As DateTime
@@ -66,30 +67,15 @@ Public Class OpenProjectFileDialogVM
          Else
             DbProjectList = DbControllers.m_ProjController.GetLastByExpDesc(dtStart, dtEnd, nRowQuantity, False)
          End If
-         For Each Project In DbProjectList
-            ' recupero path per verificare esista
-            If IsNothing(Project.nProjId) OrElse Project.nProjId = 0 Then Continue For
-            Dim sPath As String = Map.refMainWindowVM.MainWindowM.sProjsDir & "\" & Project.nProjId.ToString("0000") & "\" & Project.nProjId.ToString("0000") & ".nge"
-            If File.Exists(sPath) Then
-               m_ProjectList.Add(New ProjFileVM(Project))
-            Else
-               ' CheckMe impostata come cancellazione FISICA dal DB...
-               DbControllers.m_ProjController.DeleteProj(Project.nProjId, False)
-               EgtOutLog("Found project on Db without the folder and erased it! Proj number " & Project.nProjId.ToString("0000"))
-            End If
-         Next
-      ElseIf m_ProjectType = ProjectType.PROD Then
-         Dim DbProjectList As New List(Of ProdFileM)
-         DbProjectList = DbControllers.m_ProdController.GetLastDesc(dtStart, dtEnd, nRowQuantity, True)
-         If GoToProd Then
+         If m_GoToProd Then
             For Each Project In DbProjectList
                ' recupero path per verificare esista
                If IsNothing(Project.nProdId) OrElse Project.nProdId = 0 Then Continue For
-               Dim sPath As String = Map.refMainWindowVM.MainWindowM.sProdsDir & "\" & Project.nProdId.ToString("0000") & "\" & Project.nProdId.ToString("0000") & ".nge"
+               Dim sPath As String = Map.refMainWindowVM.MainWindowM.sProjsDir & "\" & Project.nProjId.ToString("0000") & "\" & Project.nProjId.ToString("0000") & ".nge"
                If Project.sMachine = Map.refProjManagerVM.CurrProj.sMachine AndAlso
                   Project.nType = Map.refProjManagerVM.CurrProj.nType Then
                   If File.Exists(sPath) Then
-                     m_ProjectList.Add(New ProdFileVM(Project))
+                     m_ProjectList.Add(New ProjFileVM(Project))
                   Else
                      DbControllers.m_ProdController.DeleteProd(Project.nProdId, True)
                      EgtOutLog("Found project on Db without the folder and erased it! Prod number " & Project.nProdId.ToString("0000"))
@@ -99,16 +85,31 @@ Public Class OpenProjectFileDialogVM
          Else
             For Each Project In DbProjectList
                ' recupero path per verificare esista
-               If IsNothing(Project.nProdId) OrElse Project.nProdId = 0 Then Continue For
-               Dim sPath As String = Map.refMainWindowVM.MainWindowM.sProdsDir & "\" & Project.nProdId.ToString("0000") & "\" & Project.nProdId.ToString("0000") & ".nge"
+               If IsNothing(Project.nProjId) OrElse Project.nProjId = 0 Then Continue For
+               Dim sPath As String = Map.refMainWindowVM.MainWindowM.sProjsDir & "\" & Project.nProjId.ToString("0000") & "\" & Project.nProjId.ToString("0000") & ".nge"
                If File.Exists(sPath) Then
-                  m_ProjectList.Add(New ProdFileVM(Project))
+                  m_ProjectList.Add(New ProjFileVM(Project))
                Else
-                  DbControllers.m_ProdController.DeleteProd(Project.nProdId, True)
-                  EgtOutLog("Found project on Db without the folder and erased it! Prod number " & Project.nProdId.ToString("0000"))
+                  ' CheckMe impostata come cancellazione FISICA dal DB...
+                  DbControllers.m_ProjController.DeleteProj(Project.nProjId, False)
+                  EgtOutLog("Found project on Db without the folder and erased it! Proj number " & Project.nProjId.ToString("0000"))
                End If
             Next
          End If
+      ElseIf m_ProjectType = ProjectType.PROD Then
+         Dim DbProjectList As New List(Of ProdFileM)
+         DbProjectList = DbControllers.m_ProdController.GetLastDesc(dtStart, dtEnd, nRowQuantity, True)
+         For Each Project In DbProjectList
+            ' recupero path per verificare esista
+            If IsNothing(Project.nProdId) OrElse Project.nProdId = 0 Then Continue For
+            Dim sPath As String = Map.refMainWindowVM.MainWindowM.sProdsDir & "\" & Project.nProdId.ToString("0000") & "\" & Project.nProdId.ToString("0000") & ".nge"
+            If File.Exists(sPath) Then
+               m_ProjectList.Add(New ProdFileVM(Project))
+            Else
+               DbControllers.m_ProdController.DeleteProd(Project.nProdId, True)
+               EgtOutLog("Found project on Db without the folder and erased it! Prod number " & Project.nProdId.ToString("0000"))
+            End If
+         Next
       End If
    End Sub
 

EgtBEAMWALL.ViewerOptimizer/Project/ProjectV.xaml

@@ -52,8 +52,6 @@
             <EgtBEAMWALL:ViewPanelV DataContext="{StaticResource ViewPanelVM}"/>
             <EgtBEAMWALL:InstrumentPanelV DataContext="{StaticResource InstrumentPanelVM}"/>
             <EgtBEAMWALL:CalcPanelV DataContext="{StaticResource CALCPanelVM}"/>
-            <EgtBEAMWALL:SpecialPanelV DataContext="{StaticResource SpecialPanelVM}"
-                                       Visibility="{Binding DataContext.SpecialPanel_Visibility, RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:ProjectV}}}"/>
             <EgtBEAMWALL:FreeContourManagerV DataContext="{StaticResource FreeContourManagerVM}"
                                              Visibility="{Binding DataContext.FreeContourManager_Visibility, RelativeSource={RelativeSource AncestorType={x:Type EgtBEAMWALL:ProjectV}}}"/>
          </WrapPanel>

EgtBEAMWALL.ViewerOptimizer/Project/ProjectVM.vb

@@ -3,7 +3,6 @@ Imports EgtBEAMWALL.Core
 Imports EgtWPFLib5
 Imports EgtUILib
 Imports System.Collections.ObjectModel
-Imports EgtBEAMWALL.DataLayer.Controllers
 
 Public Class ProjectVM
    Inherits VMBase
@@ -12,12 +11,6 @@ Public Class ProjectVM
 
    Private m_Calc_Timer As New DispatcherTimer
 
-   Friend Event OnPreControllerExec(sFilePath As String)
-   Friend Event OnPostControllerExec()
-
-   ' Flag per non salvare Script appena eseguito in elenco MruScript
-   Private m_bScriptInMru As Boolean = True
-
    Private Property m_GridDims As New ObservableCollection(Of GridDimension)
    Public Property GridDims As ObservableCollection(Of GridDimension)
       Get
@@ -196,13 +189,6 @@ Public Class ProjectVM
       NotifyPropertyChanged("FreeContourManager_Visibility")
    End Sub
 
-   Public ReadOnly Property SpecialPanel_Visibility As Visibility
-      Get
-         Return If(Map.refMainWindowVM.MainWindowM.bSpecialPanel AndAlso Map.refMainWindowVM.MainWindowM.nUserLevel > 5, Visibility.Visible, Visibility.Collapsed)
-      End Get
-   End Property
-
-
    Friend Sub NotifyAllPanelVisibility()
       NotifyPropertyChanged("LeftPanel_Visibility")
       NotifyPropertyChanged("TopPanel_Visibility")

EgtBEAMWALL.ViewerOptimizer/SceneHost/MySceneHostVM.vb

@@ -59,8 +59,6 @@ Public Class MySceneHostVM
          PostInitializeScene()
          ' Imposto stato gestione mouse diretto della scena a nessuno
          MainScene.SetStatusNull()
-         ' Imposto focus pulsante su false 
-         MainScene.SetFocusOnMove(False)
          ' Recupero e imposto handle finestra principale
          Dim hMainWnd As IntPtr = New WindowInteropHelper(Application.Current.MainWindow).Handle
          EgtSetMainWindowHandle(hMainWnd)

EgtBEAMWALL.ViewerOptimizer/SpecialPanel/SpecialPanelV.xaml

@@ -1,24 +0,0 @@
-<EgtFloating:EgtFloatingPanel x:Class="SpecialPanelV"
-                              xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
-                              xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
-                              xmlns:EgtFloating="clr-namespace:EgtWPFLib5.EgtFloating;assembly=EgtWPFLib5"
-                              IsTopDockable="True" IsBottomDockable="False" IsLeftDockable="False"
-                              IsRightDockable="False" Style="{StaticResource ToolBar_EgtFloatingPanel}">
-
-   <ItemsControl ItemsSource="{Binding ButtonList}">
-      <ItemsControl.ItemsPanel>
-         <ItemsPanelTemplate>
-            <StackPanel Orientation="Horizontal"/>
-         </ItemsPanelTemplate>
-      </ItemsControl.ItemsPanel>
-      <ItemsControl.ItemTemplate>
-         <DataTemplate>
-            <Button ToolTip="{Binding ToolTip}" Command="{Binding LuaExecCommand}" Style="{StaticResource DrawPanelButton}" 
-                    Visibility="{Binding Btn_Visibility}" IsEnabled="{Binding Btn_IsEnabled}">
-               <Image Source="{Binding ImagePath}"/>
-            </Button>
-         </DataTemplate>
-      </ItemsControl.ItemTemplate>
-   </ItemsControl>
-   
-</EgtFloating:EgtFloatingPanel>

EgtBEAMWALL.ViewerOptimizer/SpecialPanel/SpecialPanelV.xaml.vb

@@ -1,3 +0,0 @@
-Public Class SpecialPanelV
-
-End Class

EgtBEAMWALL.ViewerOptimizer/SpecialPanel/SpecialPanelVM.vb

@@ -1,202 +0,0 @@
-Imports System.IO
-Imports EgtUILib
-Imports EgtWPFLib5
-Imports EgtBEAMWALL.Core
-
-Public Class SpecialPanelVM
-
-   Private m_ButtonList As New List(Of ButtonItem)
-   Public ReadOnly Property ButtonList As List(Of ButtonItem)
-      Get
-         Return m_ButtonList
-      End Get
-   End Property
-
-   Sub New()
-      ' Creo riferimento a questa classe in Map
-      Map.SetRefSpecialPanelVM(Me)
-      ' se attivo, inizializzo i bottoni leggendoli da file ini
-      If Map.refMainWindowVM.MainWindowM.bSpecialPanel Then
-         Dim BtnIndex As Integer = 1
-         Dim CurrBtn As ButtonItem = Nothing
-         While GetPrivateProfileButton(S_SPECIAL, K_BUTTON & BtnIndex, "", CurrBtn)
-            m_ButtonList.Add(CurrBtn)
-            BtnIndex += 1
-         End While
-      End If
-   End Sub
-
-#Region "METHODS"
-
-   Public Function SetSpecialPanelButtonsVisibility(IsMachMode As Boolean) As Boolean
-      Dim bSpecialPanel_Visible As Boolean = False
-      For Each BtnItem In m_ButtonList
-         ' verifico il valore di nDrawMachOrBoth del bottone e IsMachMode per rendere visibile o meno il bottone in ButtonList
-         Select Case BtnItem.nDrawMachOrBoth
-            Case 0 ' bottone nascosto
-               BtnItem.m_Btn_Visibility = Visibility.Collapsed
-            Case 1 ' bottone visibile solo in Draw
-               BtnItem.m_Btn_Visibility = If(Not IsMachMode, Visibility.Visible, Visibility.Collapsed)
-            Case 2 ' bottone visibile solo in Machining
-               BtnItem.m_Btn_Visibility = If(IsMachMode, Visibility.Visible, Visibility.Collapsed)
-            Case 3 ' bottone visibile sia in Draw che in Machining
-               BtnItem.m_Btn_Visibility = Visibility.Visible
-         End Select
-         ' se anche uno solo è visibile anche lo SpecialPanel dovrà esserlo
-         If BtnItem.Btn_Visibility = Visibility.Visible Then bSpecialPanel_Visible = True
-         'BtnItem.OnPropertyChanged(NameOf(BtnItem.Btn_Visibility))
-         BtnItem.NotifyPropertyChanged(NameOf(BtnItem.Btn_Visibility))
-      Next
-      Return bSpecialPanel_Visible
-   End Function
-
-   Friend Sub SpecialPanelIsEnabled(SpecialPanelBtn_IsEnabled As Boolean)
-      For Each BtnItem In m_ButtonList
-         BtnItem.m_Btn_IsEnabled = SpecialPanelBtn_IsEnabled
-         'BtnItem.OnPropertyChanged(NameOf(BtnItem.Btn_IsEnabled))
-         BtnItem.NotifyPropertyChanged(NameOf(BtnItem.Btn_IsEnabled))
-      Next
-   End Sub
-
-   Public Function GetPrivateProfileButton(sSection As String, sKey As String, sBaseDir As String, ByRef ReadButtonItem As ButtonItem) As Boolean
-      ReadButtonItem = Nothing
-      Dim sVal As String = String.Empty
-      GetMainPrivateProfileString(sSection, sKey, "", sVal)
-      If String.IsNullOrWhiteSpace(sVal) Then Return False
-      Dim sItems() As String = sVal.Split(","c)
-      If sItems.Count() >= 1 Then
-         Dim sLuaPath As String = sItems(0)
-         Dim sImagePath As String = If(sItems.Count() >= 2, sItems(1), "")
-         Dim sToolTip As String = If(sItems.Count() >= 3, sItems(2), "")
-         Dim sDrawMachOrBoth As String = If(sItems.Count() >= 4 AndAlso Not String.IsNullOrWhiteSpace(sItems(3)), sItems(3), "1")
-         If Not String.IsNullOrWhiteSpace(sBaseDir) And Not String.IsNullOrWhiteSpace(sLuaPath) Then
-            If sLuaPath.Contains(".lua") Then sLuaPath = sBaseDir & "\" & sLuaPath
-            If Not String.IsNullOrWhiteSpace(sImagePath) Then sImagePath = sBaseDir & "\" & sImagePath
-         End If
-         ReadButtonItem = New ButtonItem(sSection, sLuaPath, sImagePath, sToolTip, sDrawMachOrBoth)
-         Return True
-      End If
-      Return False
-   End Function
-
-#End Region    ' Methods
-
-End Class
-
-Public Class ButtonItem
-   Inherits VMBase
-
-   Friend Shared WithEvents m_ProjectVM As ProjectVM
-   Private Shared m_sCurrBarName As String
-
-   Private m_sBarName As String
-   Private m_sImagePath As String
-   Public ReadOnly Property ImagePath As String
-      Get
-         Return m_sImagePath
-      End Get
-   End Property
-   Private m_sLuaCmdPath As String
-   Private m_sToolTip As String
-   Public ReadOnly Property ToolTip As String
-      Get
-         Return m_sToolTip
-      End Get
-   End Property
-   Private m_nDrawMachOrBoth As Integer
-   Public ReadOnly Property nDrawMachOrBoth As Integer
-      Get
-         Return m_nDrawMachOrBoth
-      End Get
-   End Property
-   Friend m_Btn_Visibility As Visibility
-   Public ReadOnly Property Btn_Visibility As Visibility
-      Get
-         Return m_Btn_Visibility
-      End Get
-   End Property
-
-   Friend m_Btn_IsEnabled As Boolean = True
-   Public ReadOnly Property Btn_IsEnabled As Boolean
-      Get
-         Return m_Btn_IsEnabled
-      End Get
-   End Property
-
-   ' Definizione comandi
-   Private m_cmdLuaExec As ICommand
-
-   Sub New( sBarName As String, sLuaCmdPath As String, sImagePath As String, sToolTip As String, sDrawMachOrBoth As String)
-      m_sBarName = sBarName
-      If File.Exists(sImagePath) Then
-         ' per lasciare libere le immagini le copio (potrebbe fallire perchè bloccate da altro eseguibile)
-         Dim sNewPath As String = Path.Combine(Map.refMainWindowVM.MainWindowM.sResourcesRoot, sBarName & "_" & Path.GetFileName(sImagePath))
-         Try
-            File.Copy( sImagePath, sNewPath, True)
-         Catch ex As Exception
-         End Try
-         m_sImagePath = sNewPath
-      Else
-         m_sImagePath = Map.refMainWindowVM.MainWindowM.sResourcesRoot & "\" & sImagePath
-      End If
-      m_sLuaCmdPath = sLuaCmdPath
-      m_sToolTip = sToolTip
-      If Not Integer.TryParse(sDrawMachOrBoth, m_nDrawMachOrBoth) Then m_nDrawMachOrBoth = 0
-   End Sub
-
-#Region "COMMANDS"
-
-#Region "LuaExecCommand"
-
-   ''' <summary>
-   ''' Returns a command that do New.
-   ''' </summary>
-   Public ReadOnly Property LuaExecCommand As ICommand
-      Get
-         If m_cmdLuaExec Is Nothing Then
-            m_cmdLuaExec = New Command(AddressOf LuaExec)
-         End If
-         Return m_cmdLuaExec
-      End Get
-   End Property
-
-   ''' <summary>
-   ''' Execute the New.  This method is invoked by the NewCommand.
-   ''' </summary>
-   Public Sub LuaExec(ByVal param As Object)
-      If String.IsNullOrWhiteSpace(m_sLuaCmdPath) Then Return
-      If Not File.Exists(m_sLuaCmdPath) Then Return
-      If Not Path.GetExtension(m_sLuaCmdPath).ToLower = ".lua" Then Return
-      ' Abilito eventi se comando lua termina con Beam\Process.lua
-      m_sCurrBarName = m_sBarName
-      Dim bRaiseEvent As Boolean = ( m_sBarName = "Beam"  OrElse m_sBarName = "Wall")
-      ' eseguo file Lua
-      EgtBEAMWALL.ViewerOptimizer.LuaExec.ExecScript(m_sLuaCmdPath, bRaiseEvent)
-      m_sCurrBarName = Nothing
-   End Sub
-
-   'Private Shared Sub OnPreControllerExec(sFilePath As String) Handles m_ProjectVM.OnPreControllerExec
-   '   If m_sCurrBarName = "Beam" Then
-   '      EgtLuaCreateGlobTable("BEAM")
-   '      EgtLuaSetGlobStringVar("BEAM.BASEDIR", IniFile.m_sBeamDirPath)
-   '      If EgtGetUserLevel() >= 9 AndAlso GetPrivateProfileInt(S_LUA, K_BWSIM, 0) = 1 then EgtLuaSetGlobBoolVar("BEAM.BW", true)
-   '   ElseIf m_sCurrBarName = "Wall" Then
-   '      EgtLuaCreateGlobTable("WALL")
-   '      EgtLuaSetGlobStringVar("WALL.BASEDIR", IniFile.m_sWallDirPath)
-   '      If EgtGetUserLevel() >= 9 AndAlso GetPrivateProfileInt(S_LUA, K_BWSIM, 0) = 1 then EgtLuaSetGlobBoolVar("WALL.BW", true)
-   '   End If
-   'End Sub
-
-   'Private Shared Sub OnPostControllerExec() Handles m_ProjectVM.OnPostControllerExec
-   '   If m_sCurrBarName = "Beam" Then
-   '      EgtLuaResetGlobVar("BEAM")
-   '   ElseIf m_sCurrBarName = "Wall" Then
-   '      EgtLuaResetGlobVar("WALL")
-   '   End If
-   'End Sub
-
-#End Region ' LuaExecCommand
-
-#End Region    ' Commands
-
-End Class

EgtBEAMWALL.ViewerOptimizer/Utility/DbControllers.vb

@@ -68,8 +68,6 @@ Public Module DbControllers
          DataLayer.DbConfig.CheckMigrateDb()
          DataLayer.DbConfig.CheckUser(sUser, sPwd, m_bNetwork AndAlso Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.NETWORK))
          DataLayer.DbConfig.CheckViews(sUser, sPwd)
-         ' riattivare il dump per il backup
-         'DataLayer.DbConfig.DumpDB("C:\Program Files\MariaDB 10.5\bin\mysqldump", "c:\Temp\Pippo.sql")
          If m_bNetwork AndAlso Map.refMainWindowVM.MainWindowM.GetKeyOption(KEY_OPT.NETWORK) Then
             ' imposto cartella condivisa
             GetMainPrivateProfileString(S_GENERAL, K_SHAREDFOLDER, Map.refMainWindowVM.MainWindowM.sDataDir, sSharedFolder)

EgtBEAMWALL.ViewerOptimizer/Utility/Dictionary.xaml

@@ -51,7 +51,6 @@
    <OmagOFFICE:MachiningTabVM x:Key="MachiningTabVM"/>
    <OmagOFFICE:SimulTabVM x:Key="SimulTabVM"/>-->
    <EgtBEAMWALL:MyMachGroupPanelVM x:Key="MachGroupPanelVM"/>
-   <EgtBEAMWALL:SpecialPanelVM x:Key="SpecialPanelVM"/>
 
    <!--Colori predefiniti-->
    <SolidColorBrush x:Key="Omag_Blue" Color="#FF095CA8" />
@@ -311,13 +310,6 @@
       </Style.Triggers>
    </Style>
 
-
-   <Style x:Key="DrawPanelButton" TargetType="{x:Type Button}" BasedOn="{StaticResource {x:Type Button}}">
-      <Setter Property="Height" Value="30"/>
-      <Setter Property="Width" Value="30"/>
-   </Style>
-
-
    <!-- ______________________________________________________________________________________________________________________________________________ -->
 
    <!-- TextBlock -->

EgtBEAMWALL.ViewerOptimizer/Utility/LuaExec.vb

@@ -1,5 +1,4 @@
 Imports EgtBEAMWALL.Core
-Imports EgtBEAMWALL.DataLayer.Controllers
 Imports EgtUILib
 Imports EgtWPFLib5
 
@@ -204,17 +203,4 @@ Module LuaExec
       Return bOk
    End Function
 
-   ' Special Panel
-   Friend Sub ExecScript(sFilePath As String, Optional bRaiseEvent As Boolean = False)
-      EgtLuaExecFile(sFilePath)
-
-      'Dim bMachiningMode As Boolean = EgtGetCurrMachGroup() <> GDB_ID.NULL
-      'If Not bMachiningMode And EgtGetCurrLayer() = GDB_ID.NULL Then
-      '   Dim nCurrPart As Integer = EgtGetCurrPart()
-      '   If nCurrPart = GDB_ID.NULL Or Not EgtSetCurrPartLayer(nCurrPart, EgtGetFirstLayer(nCurrPart, True)) Then
-      '      EgtResetCurrPartLayer()
-      '   End If
-      'End If
-   End Sub
-
 End Module

EgtBEAMWALL.ViewerOptimizer/Utility/Map.vb

@@ -34,7 +34,6 @@ Module Map
    Private m_refFeatureManagerVM As FeatureManagerVM
    Private m_refAddSectionXMaterialWndVM As AddSectionXMaterialWndVM
    Private m_refStatisticsTimePanelVM As StatisticsTimePanelVM
-   Private m_refSpecialPanelVM As SpecialPanelVM
    'Private m_refOpenProjectFileDialogVM As OpenProjectFileDialogVM
    'Private m_refRawPartTabVM As RawPartTabVM
    'Private m_refNestingTabVM As NestingTabVM
@@ -242,12 +241,6 @@ Module Map
       End Get
    End Property
 
-   Public ReadOnly Property refSpecialPanelVM As SpecialPanelVM
-      Get
-         Return m_refSpecialPanelVM
-      End Get
-   End Property
-
    'Public ReadOnly Property refOpenProjectFileDialogVM As OpenProjectFileDialogVM
    '   Get
    '      Return m_refOpenProjectFileDialogVM
@@ -460,12 +453,6 @@ Module Map
       Return Not IsNothing(m_refStatisticsTimePanelVM)
    End Function
 
-   Friend Function SetRefSpecialPanelVM(SpecialPanelVM As SpecialPanelVM) As Boolean
-      m_refSpecialPanelVM = SpecialPanelVM
-      Return Not IsNothing(m_refSpecialPanelVM)
-   End Function
-
-
    'Friend Function SetRefOpenProjectFileDialogVM(OpenProjectFileDialogVM As OpenProjectFileDialogVM) As Boolean
    '   m_refOpenProjectFileDialogVM = OpenProjectFileDialogVM
    '   Return Not IsNothing(m_refOpenProjectFileDialogVM)
@@ -539,7 +526,7 @@ Module Map
              Not IsNothing(m_refStatisticsVM) AndAlso Not IsNothing(m_refPParameterListVM) AndAlso
              Not IsNothing(m_refQParameterListVM) AndAlso Not IsNothing(m_refFeatureManagerVM) AndAlso
              Not IsNothing(m_refAddSectionXMaterialWndVM) AndAlso Not IsNothing(m_refStatisticsTimePanelVM) AndAlso
-             Not IsNothing(m_refSpecialPanelVM) AndAlso LibMap.EndInit()
+             LibMap.EndInit()
    End Function
 
 #End Region    ' Init